WorldWideScience

Sample records for sampling frame constructed

  1. Gabor frames by sampling and periodization

    DEFF Research Database (Denmark)

    Søndergaard, Peter Lempel

    2007-01-01

    By sampling the window of Gabor frame for L-2 (R) belonging to Feichtingers algebra S-0 (R), one obtains a Gabor frame for l(2) (Z). In this article we present a survey of results by R. Orr and A.J.E.M. Janssen and extend their ideas to cover interrelations among Gabor frames for the four spaces L......-2 (R), l(2) (Z), L-2 ([O,L]) and C-L. Some new results about the general dual windows with respect to sampling and periodization are presented as well. This theory is used to show a new result of the Kaiblinger type to construct an approximation to the canonical dual window of a Gabor frame for L-2...

  2. Airborne sound transmission loss characteristics of wood-frame construction

    Science.gov (United States)

    Rudder, F. F., Jr.

    1985-03-01

    This report summarizes the available data on the airborne sound transmission loss properties of wood-frame construction and evaluates the methods for predicting the airborne sound transmission loss. The first part of the report comprises a summary of sound transmission loss data for wood-frame interior walls and floor-ceiling construction. Data bases describing the sound transmission loss characteristics of other building components, such as windows and doors, are discussed. The second part of the report presents the prediction of the sound transmission loss of wood-frame construction. Appropriate calculation methods are described both for single-panel and for double-panel construction with sound absorption material in the cavity. With available methods, single-panel construction and double-panel construction with the panels connected by studs may be adequately characterized. Technical appendices are included that summarize laboratory measurements, compare measurement with theory, describe details of the prediction methods, and present sound transmission loss data for common building materials.

  3. Construction Cluster Volume I [Wood Structural Framing].

    Science.gov (United States)

    Pennsylvania State Dept. of Justice, Harrisburg. Bureau of Correction.

    The document is the first of a series, to be integrated with a G.E.D. program, containing instructional materials at the basic skills level for the construction cluster. It focuses on wood structural framing and contains 20 units: (1) occupational information; (2) blueprint reading; (3) using leveling instruments and laying out building lines; (4)…

  4. Constructing pairs of dual bandlimited frame wavelets in L^2(R^n)

    DEFF Research Database (Denmark)

    Lemvig, Jakob

    2012-01-01

    combination of dilations of ψ with explicitly given coefficients. The result allows a simple construction procedure for pairs of dual wavelet frames whose generators have compact support in the Fourier domain and desired time localization. The construction relies on a technical condition on ψ, and we exhibit......Given a real, expansive dilation matrix we prove that any bandlimited function ψ∈L2(Rn), for which the dilations of its Fourier transform form a partition of unity, generates a wavelet frame for certain translation lattices. Moreover, there exists a dual wavelet frame generated by a finite linear...

  5. a constructive approach to the finite wavelet frames over prime fields

    Indian Academy of Sciences (India)

    6

    The motivation of this paper is to establish an alternative constructive formulation for the wavelet coefficients of finite ... is a |G|-dimensional vector space with complex vector entries indexed by elements in the finite group G. The inner product of x,y ∈ CG is defined by .... Construction of Wavelet Frames over Prime Fields.

  6. On transforms between Gabor frames and wavelet frames

    DEFF Research Database (Denmark)

    Christensen, Ole; Goh, Say Song

    2013-01-01

    We describe a procedure that enables us to construct dual pairs of wavelet frames from certain dual pairs of Gabor frames. Applying the construction to Gabor frames generated by appropriate exponential Bsplines gives wavelet frames generated by functions whose Fourier transforms are compactly...... supported splines with geometrically distributed knot sequences. There is also a reverse transform, which yields pairs of dual Gabor frames when applied to certain wavelet frames....

  7. Variable type framing in Spanish constructions of directed motion

    DEFF Research Database (Denmark)

    Pedersen, Johan

    2014-01-01

    demonstrate in this article that this construction type tends to be acceptable whenever the lexical meaning of the verb implies an element of directed motion. Drawing on Goldberg (2006) and Pedersen (2009, 2013), I suggest that schematicity is a typological parameter, and, more specifically, that the term...... variable type framing may accommodate the case of variation under scrutiny here....

  8. CONSTRUCTION THEORY AND NOISE ANALYSIS METHOD OF GLOBAL CGCS2000 COORDINATE FRAME

    Directory of Open Access Journals (Sweden)

    Z. Jiang

    2018-04-01

    Full Text Available The definition, renewal and maintenance of geodetic datum has been international hot issue. In recent years, many countries have been studying and implementing modernization and renewal of local geodetic reference coordinate frame. Based on the precise result of continuous observation for recent 15 years from state CORS (continuously operating reference system network and the mainland GNSS (Global Navigation Satellite System network between 1999 and 2007, this paper studies the construction of mathematical model of the Global CGCS2000 frame, mainly analyzes the theory and algorithm of two-step method for Global CGCS2000 Coordinate Frame formulation. Finally, the noise characteristic of the coordinate time series are estimated quantitatively with the criterion of maximum likelihood estimation.

  9. Multivariate wavelet frames

    CERN Document Server

    Skopina, Maria; Protasov, Vladimir

    2016-01-01

    This book presents a systematic study of multivariate wavelet frames with matrix dilation, in particular, orthogonal and bi-orthogonal bases, which are a special case of frames. Further, it provides algorithmic methods for the construction of dual and tight wavelet frames with a desirable approximation order, namely compactly supported wavelet frames, which are commonly required by engineers. It particularly focuses on methods of constructing them. Wavelet bases and frames are actively used in numerous applications such as audio and graphic signal processing, compression and transmission of information. They are especially useful in image recovery from incomplete observed data due to the redundancy of frame systems. The construction of multivariate wavelet frames, especially bases, with desirable properties remains a challenging problem as although a general scheme of construction is well known, its practical implementation in the multidimensional setting is difficult. Another important feature of wavelet is ...

  10. Prime tight frames

    DEFF Research Database (Denmark)

    Lemvig, Jakob; Miller, Christopher; Okoudjou, Kasso A.

    2014-01-01

    to suggest effective analysis and synthesis computation strategies for such frames. Finally, we describe all prime frames constructed from the spectral tetris method, and, as a byproduct, we obtain a characterization of when the spectral tetris construction works for redundancies below two.......We introduce a class of finite tight frames called prime tight frames and prove some of their elementary properties. In particular, we show that any finite tight frame can be written as a union of prime tight frames. We then characterize all prime harmonic tight frames and use thischaracterization...

  11. On frame multiresolution analysis

    DEFF Research Database (Denmark)

    Christensen, Ole

    2003-01-01

    We use the freedom in frame multiresolution analysis to construct tight wavelet frames (even in the case where the refinable function does not generate a tight frame). In cases where a frame multiresolution does not lead to a construction of a wavelet frame we show how one can nevertheless...

  12. A construction of unimodular equiangular tight frames from resolvable Steiner systems

    Science.gov (United States)

    Jasper, John

    2013-09-01

    An equiangular tight frame (ETF) is an M x N matrix which has orthogonal equal norm rows, equal norm columns, and the inner products of all pairs of columns have the same modulus. In this paper we study ETFs in which all of the entries are unimodular, and in particular pth roots of unity. A new construction of unimodular ETFs based on resolvable Steiner systems is presented. This construction gives many new examples of unimodular ETFs. In particular, an new infinite class of ETFs with entries in f1;-1g is presented.

  13. Approximately dual frames in Hilbert spaces and applications to Gabor frames

    OpenAIRE

    Christensen, Ole; Laugesen, Richard S.

    2011-01-01

    Approximately dual frames are studied in the Hilbert space setting. Approximate duals are easier to construct than classical dual frames, and can be tailored to yield almost perfect reconstruction. Bounds on the deviation from perfect reconstruction are obtained for approximately dual frames constructed via perturbation theory. An alternative bound is derived for the rich class of Gabor frames, by using the Walnut representation of the frame operator to estimate the deviation from equality in...

  14. Inelastic seismic response of precast concrete frames with constructed plastic hinges

    Science.gov (United States)

    Sucuoglu, H.

    1995-07-01

    A modified seismic design concept is introduced for precast concrete frames in which beam plastic hinges with reduced yield capacities are constructed away from the precast beam-column connections arranged at the column faces. Plastic hinge location and yield capacity are employed as the basic parameters of an analytical survey in which the inelastic dynamic responses of a conventional precast frame and its modified counterparts are calculated and compared under two earthquake excitations by using a general purpose computer program for dynamic analysis of inelastic frames (left bracket) 1, 2 (right bracket). An optimum design is obtained by providing plastic hinges on precast beams located at one depth away from the beam ends, in which primary (negative) bending moment yield capacities are reduced between one-third and one-quarter of the beam design end moments. With such plastic hinge configurations, precast beam-column connections at the column faces can be designed to remain elastic under strong earthquake excitations.

  15. Comparisons of selected frame constructions considering effects of rock bursts and earthquakes. [Poland

    Energy Technology Data Exchange (ETDEWEB)

    Trojan, Z.; Lipski, Z.; Raczek, R.

    1985-01-01

    Methods for assessing apartment buildings with frames made of reinforced concrete or steel elements situated above coal mines in Upper Silesia are analyzed. Six buildings from 13.5 m to 37.8 m high are analyzed. Methods for design of earthquake-resistant buildings and buildings constructed in areas affected by underground coal mining are compared. Safety standards used in Israel, the FRG, the USSR, Czechoslovakia and Australia are compared to standards used in Poland for buildings in areas affected by underground mining in Upper Silesia. Loads on a building frame during a shock (caused by mining) with an energy of 10/sup 9/ J are analyzed. Force of inertia and bending moment in the building frame is calculated. Investigation results are shown in 3 tables and in a diagram. Recommendations for methods of calculating bending moment in frames of buildings affected by shocks caused by underground coal mining are made. 11 references.

  16. A hard-to-read font reduces the framing effect in a large sample.

    Science.gov (United States)

    Korn, Christoph W; Ries, Juliane; Schalk, Lennart; Oganian, Yulia; Saalbach, Henrik

    2018-04-01

    How can apparent decision biases, such as the framing effect, be reduced? Intriguing findings within recent years indicate that foreign language settings reduce framing effects, which has been explained in terms of deeper cognitive processing. Because hard-to-read fonts have been argued to trigger deeper cognitive processing, so-called cognitive disfluency, we tested whether hard-to-read fonts reduce framing effects. We found no reliable evidence for an effect of hard-to-read fonts on four framing scenarios in a laboratory (final N = 158) and an online study (N = 271). However, in a preregistered online study with a rather large sample (N = 732), a hard-to-read font reduced the framing effect in the classic "Asian disease" scenario (in a one-sided test). This suggests that hard-read-fonts can modulate decision biases-albeit with rather small effect sizes. Overall, our findings stress the importance of large samples for the reliability and replicability of modulations of decision biases.

  17. Construction simulation analysis of 120m continuous rigid frame bridge based on Midas Civil

    Science.gov (United States)

    Shi, Jing-xian; Ran, Zhi-hong

    2018-03-01

    In this paper, a three-dimensional finite element model of a continuous rigid frame bridge with a main span of 120m is established by the simulation and analysis of Midas Civil software. The deflection and stress of the main beam in each construction stage of continuous beam bridge are simulated and analyzed, which provides a reliable technical guarantee for the safe construction of the bridge.

  18. Surveying immigrants without sampling frames - evaluating the success of alternative field methods.

    Science.gov (United States)

    Reichel, David; Morales, Laura

    2017-01-01

    This paper evaluates the sampling methods of an international survey, the Immigrant Citizens Survey, which aimed at surveying immigrants from outside the European Union (EU) in 15 cities in seven EU countries. In five countries, no sample frame was available for the target population. Consequently, alternative ways to obtain a representative sample had to be found. In three countries 'location sampling' was employed, while in two countries traditional methods were used with adaptations to reach the target population. The paper assesses the main methodological challenges of carrying out a survey among a group of immigrants for whom no sampling frame exists. The samples of the survey in these five countries are compared to results of official statistics in order to assess the accuracy of the samples obtained through the different sampling methods. It can be shown that alternative sampling methods can provide meaningful results in terms of core demographic characteristics although some estimates differ to some extent from the census results.

  19. Frames, operator representations, and open problems

    DEFF Research Database (Denmark)

    Christensen, Ole; Hasannasab, Marzieh

    2018-01-01

    , a topic that has recently attracted considerably interest within harmonic analysis. The goal of the paper is twofold, namely, that experts in operator theory will explore the potential of frames, and that frame theory will benefit from insight provided by the operator theory community.......A frame in a Hilbert space H is a countable collection of elements in H that allows each f ϵ H to be expanded as an (infinite) linear combination of the frame elements. Frames generalize the wellknown orthonormal bases, but provide much more exibility and can often be constructed with properties...... that are not possible for orthonormal bases. We will present the basic facts in frame theory with focus on their operator theoretical characterizations and discuss open problems concerning representations of frames in terms of iterations of a fixed operator. These problems come up in the context of dynamical sampling...

  20. Media framing and construction of childhood obesity: a content analysis of Swedish newspapers.

    Science.gov (United States)

    van Hooft, J; Patterson, C; Löf, M; Alexandrou, C; Hilton, S; Nimegeer, A

    2018-02-01

    Despite lower prevalence than most European countries, childhood obesity is a Swedish public health priority due to its lasting health impacts and socioeconomic patterning. Mass media content influences public and political perceptions of health issues, and media framing of childhood obesity may influence perceptions of its solutions. This study examines framing of childhood obesity in Swedish morning and evening newspapers from 1996 to 2014. Content analysis of 726 articles about childhood obesity published in the five most-circulated Swedish newspapers. Article content coded quantitatively and subjected to statistical analysis, describing relationships between themes and trends over time. Childhood obesity was consistently problematised, primarily in health terms, and linked to socio-economic and geographical factors. The yearly frequency of articles peaked in 2004, followed by a decline, corresponding with evidence about prevalence. Childhood obesity was framed as being driven by individual behaviours more frequently than structural or environmental factors. Structural framings increased over time, but constructions of the problem as driven by individual behaviours, particularly parenting, remained prominent. A relative growth in structural framings of causes and solutions over time, combined with prominent coverage of socio-economic inequalities, might be indicative of public and political amenability towards societal-level solutions, but individual behaviours remain prominent in framing of the issue. Health advocates might incorporate these insights into media engagement.

  1. Approximately dual frames in Hilbert spaces and applications to Gabor frames

    DEFF Research Database (Denmark)

    Christensen, Ole; Laugesen, Richard S.

    2011-01-01

    constructed via perturbation theory. An alternative bound is derived for the rich class of Gabor frames, by using the Walnut representation of the frame operator to estimate the deviation from equality in the duality conditions. To illustrate these results, we construct explicit approximate duals of Gabor...

  2. Selection bias in population-based cancer case-control studies due to incomplete sampling frame coverage.

    Science.gov (United States)

    Walsh, Matthew C; Trentham-Dietz, Amy; Gangnon, Ronald E; Nieto, F Javier; Newcomb, Polly A; Palta, Mari

    2012-06-01

    Increasing numbers of individuals are choosing to opt out of population-based sampling frames due to privacy concerns. This is especially a problem in the selection of controls for case-control studies, as the cases often arise from relatively complete population-based registries, whereas control selection requires a sampling frame. If opt out is also related to risk factors, bias can arise. We linked breast cancer cases who reported having a valid driver's license from the 2004-2008 Wisconsin women's health study (N = 2,988) with a master list of licensed drivers from the Wisconsin Department of Transportation (WDOT). This master list excludes Wisconsin drivers that requested their information not be sold by the state. Multivariate-adjusted selection probability ratios (SPR) were calculated to estimate potential bias when using this driver's license sampling frame to select controls. A total of 962 cases (32%) had opted out of the WDOT sampling frame. Cases age <40 (SPR = 0.90), income either unreported (SPR = 0.89) or greater than $50,000 (SPR = 0.94), lower parity (SPR = 0.96 per one-child decrease), and hormone use (SPR = 0.93) were significantly less likely to be covered by the WDOT sampling frame (α = 0.05 level). Our results indicate the potential for selection bias due to differential opt out between various demographic and behavioral subgroups of controls. As selection bias may differ by exposure and study base, the assessment of potential bias needs to be ongoing. SPRs can be used to predict the direction of bias when cases and controls stem from different sampling frames in population-based case-control studies.

  3. Geospatial techniques for developing a sampling frame of watersheds across a region

    Science.gov (United States)

    Gresswell, Robert E.; Bateman, Douglas S.; Lienkaemper, George; Guy, T.J.

    2004-01-01

    Current land-management decisions that affect the persistence of native salmonids are often influenced by studies of individual sites that are selected based on judgment and convenience. Although this approach is useful for some purposes, extrapolating results to areas that were not sampled is statistically inappropriate because the sampling design is usually biased. Therefore, in recent investigations of coastal cutthroat trout (Oncorhynchus clarki clarki) located above natural barriers to anadromous salmonids, we used a methodology for extending the statistical scope of inference. The purpose of this paper is to apply geospatial tools to identify a population of watersheds and develop a probability-based sampling design for coastal cutthroat trout in western Oregon, USA. The population of mid-size watersheds (500-5800 ha) west of the Cascade Range divide was derived from watershed delineations based on digital elevation models. Because a database with locations of isolated populations of coastal cutthroat trout did not exist, a sampling frame of isolated watersheds containing cutthroat trout had to be developed. After the sampling frame of watersheds was established, isolated watersheds with coastal cutthroat trout were stratified by ecoregion and erosion potential based on dominant bedrock lithology (i.e., sedimentary and igneous). A stratified random sample of 60 watersheds was selected with proportional allocation in each stratum. By comparing watershed drainage areas of streams in the general population to those in the sampling frame and the resulting sample (n = 60), we were able to evaluate the how representative the subset of watersheds was in relation to the population of watersheds. Geospatial tools provided a relatively inexpensive means to generate the information necessary to develop a statistically robust, probability-based sampling design.

  4. Frame on frames: an annotated bibliography

    International Nuclear Information System (INIS)

    Wright, T.; Tsao, H.J.

    1983-01-01

    The success or failure of any sample survey of a finite population is largely dependent upon the condition and adequacy of the list or frame from which the probability sample is selected. Much of the published survey sampling related work has focused on the measurement of sampling errors and, more recently, on nonsampling errors to a lesser extent. Recent studies on data quality for various types of data collection systems have revealed that the extent of the nonsampling errors far exceeds that of the sampling errors in many cases. While much of this nonsampling error, which is difficult to measure, can be attributed to poor frames, relatively little effort or theoretical work has focused on this contribution to total error. The objective of this paper is to present an annotated bibliography on frames with the hope that it will bring together, for experimenters, a number of suggestions for action when sampling from imperfect frames and that more attention will be given to this area of survey methods research

  5. Orthogonal Multiwavelet Frames in L2Rd

    Directory of Open Access Journals (Sweden)

    Liu Zhanwei

    2012-01-01

    Full Text Available We characterize the orthogonal frames and orthogonal multiwavelet frames in L2Rd with matrix dilations of the form (Df(x=detAf(Ax, where A is an arbitrary expanding d×d matrix with integer coefficients. Firstly, through two arbitrarily multiwavelet frames, we give a simple construction of a pair of orthogonal multiwavelet frames. Then, by using the unitary extension principle, we present an algorithm for the construction of arbitrarily many orthogonal multiwavelet tight frames. Finally, we give a general construction algorithm for orthogonal multiwavelet tight frames from a scaling function.

  6. The influence of different framing strategies in the social construction of a niche: ambidexterity in developing a bio resource market

    NARCIS (Netherlands)

    Loohuis, Raymond Petrus Antonius; von Raesfeld Meijer, Ariane M.; Groen, Arend J.

    2014-01-01

    Which framing strategy helps developing a regional bio resource market? Building on literature interested in the social construction of niches in the renewable energy technology, we examine how the enactment of different framing strategies (diagnostic, prognostic, and motivational) influence how a

  7. Wavelet frames and their duals

    DEFF Research Database (Denmark)

    Lemvig, Jakob

    2008-01-01

    frames with good time localization and other attractive properties. Furthermore, the dual wavelet frames are constructed in such a way that we are guaranteed that both frames will have the same desirable features. The construction procedure works for any real, expansive dilation. A quasi-affine system....... The signals are then represented by linear combinations of the building blocks with coefficients found by an associated frame, called a dual frame. A wavelet frame is a frame where the building blocks are stretched (dilated) and translated versions of a single function; such a frame is said to have wavelet...... structure. The dilation of the wavelet building blocks in higher dimension is done via a square matrix which is usually taken to be integer valued. In this thesis we step away from the "usual" integer, expansive dilation and consider more general, expansive dilations. In most applications of wavelet frames...

  8. Frames, agency and institutional change

    DEFF Research Database (Denmark)

    Rasmussen, Grane Mikael Gregaard; Jensen, Per Langaa; Gottlieb, Stefan Christoffer

    2017-01-01

    This study examines change and the sources influencing the formulation and diffusion of policies in construction. The change examined is the introduction of a benchmarking policy initiative in the Danish construction industry. Using institutional theory with emphasis on the concepts of frames...... and framings, we show how strategically motivated actors are able to frame policy problems in ways that disclose the mixture of motives, interests and institutional mechanisms at play in change processes. In doing so, we contribute to the literature on the role of agency in institutional change and the framing...

  9. Message framing for health: moderation by perceived susceptibility and motivational orientation in a diverse sample of Americans.

    Science.gov (United States)

    Updegraff, John A; Brick, Cameron; Emanuel, Amber S; Mintzer, Roy E; Sherman, David K

    2015-01-01

    The present study examined how gain- and loss-framed informational videos about oral health influence self-reported flossing behavior over a 6-month period, as well as the roles of perceived susceptibility to oral health problems and approach/avoidance motivational orientation in moderating these effects. An age and ethnically diverse sample of 855 American adults were randomized to receive no health message, or either a gain-framed or loss-framed video presented on the Internet. Self-reported flossing was assessed longitudinally at 2 and 6 months. Among the entire sample, susceptibility interacted with frame to predict flossing. Participants who watched a video where the frame (gain/loss) matched perceived susceptibility (low/high) had significantly greater likelihood of flossing at recommended levels at the 6-month follow-up, compared with those who viewed a mismatched video or no video at all. However, young adults (18-24) showed stronger moderation by motivational orientation than by perceived susceptibility, in line with previous work largely conducted with young adult samples. Brief informational interventions can influence long-term health behavior, particularly when the gain- or loss-frame of the information matches the recipient's beliefs about their health outcome risks.

  10. Banach frames for multivariate alpha-modulation spaces

    DEFF Research Database (Denmark)

    Borup, Lasse; Nielsen, Morten

    2006-01-01

    The α-modulation spaces [$Mathematical Term$], form a family of spaces that include the Besov and modulation spaces as special cases. This paper is concerned with construction of Banach frames for α-modulation spaces in the multivariate setting. The frames constructed are unions of independent Ri...... Riesz sequences based on tensor products of univariate brushlet functions, which simplifies the analysis of the full frame. We show that the multivariate α-modulation spaces can be completely characterized by the Banach frames constructed....

  11. Identification of eukaryotic open reading frames in metagenomic cDNA libraries made from environmental samples.

    Science.gov (United States)

    Grant, Susan; Grant, William D; Cowan, Don A; Jones, Brian E; Ma, Yanhe; Ventosa, Antonio; Heaphy, Shaun

    2006-01-01

    Here we describe the application of metagenomic technologies to construct cDNA libraries from RNA isolated from environmental samples. RNAlater (Ambion) was shown to stabilize RNA in environmental samples for periods of at least 3 months at -20 degrees C. Protocols for library construction were established on total RNA extracted from Acanthamoeba polyphaga trophozoites. The methodology was then used on algal mats from geothermal hot springs in Tengchong county, Yunnan Province, People's Republic of China, and activated sludge from a sewage treatment plant in Leicestershire, United Kingdom. The Tenchong libraries were dominated by RNA from prokaryotes, reflecting the mainly prokaryote microbial composition. The majority of these clones resulted from rRNA; only a few appeared to be derived from mRNA. In contrast, many clones from the activated sludge library had significant similarity to eukaryote mRNA-encoded protein sequences. A library was also made using polyadenylated RNA isolated from total RNA from activated sludge; many more clones in this library were related to eukaryotic mRNA sequences and proteins. Open reading frames (ORFs) up to 378 amino acids in size could be identified. Some resembled known proteins over their full length, e.g., 36% match to cystatin, 49% match to ribosomal protein L32, 63% match to ribosomal protein S16, 70% to CPC2 protein. The methodology described here permits the polyadenylated transcriptome to be isolated from environmental samples with no knowledge of the identity of the microorganisms in the sample or the necessity to culture them. It has many uses, including the identification of novel eukaryotic ORFs encoding proteins and enzymes.

  12. Pairs of dual periodic frames

    DEFF Research Database (Denmark)

    Christensen, Ole; Goh, Say Song

    2012-01-01

    The time–frequency analysis of a signal is often performed via a series expansion arising from well-localized building blocks. Typically, the building blocks are based on frames having either Gabor or wavelet structure. In order to calculate the coefficients in the series expansion, a dual frame...... is needed. The purpose of the present paper is to provide constructions of dual pairs of frames in the setting of the Hilbert space of periodic functions L2(0,2π). The frames constructed are given explicitly as trigonometric polynomials, which allows for an efficient calculation of the coefficients...

  13. Message Framing for Health: Moderation by Perceived Susceptibility and Motivational Orientation in a Diverse Sample of Americans

    Science.gov (United States)

    Updegraff, John A.; Brick, Cameron; Emanuel, Amber S.; Mintzer, Roy E.; Sherman, David K.

    2015-01-01

    Objective The present study examined how gain- and loss-framed informational videos about oral health influence self-reported flossing behavior over a 6-month period, as well as the roles of perceived susceptibility to oral health problems and approach/avoidance motivational orientation in moderating these effects. Method An age and ethnically diverse sample of 855 American adults were randomized to receive no health message, or either a gain-framed or loss-framed video presented on the Internet. Self-reported flossing was assessed longitudinally at 2 and 6 months. Results Among the entire sample, susceptibility interacted with frame to predict flossing. Participants who watched a video where the frame (gain/loss) matched perceived susceptibility (low/high) had significantly greater likelihood of flossing at recommended levels at the 6-month follow-up, compared with those who viewed a mismatched video or no video at all. However, young adults (18–24) showed stronger moderation by motivational orientation than by perceived susceptibility, in line with previous work largely conducted with young adult samples. Conclusion Brief informational interventions can influence long-term health behavior, particularly when the gain- or loss-frame of the information matches the recipient’s beliefs about their health outcome risks. PMID:25020153

  14. Lateral Displacement And Shear Lag Effect Of High-Rise Buildings With Diagrid SystemThat Is Constructed Above A Frame

    Directory of Open Access Journals (Sweden)

    Abd. Samat Roslida

    2017-01-01

    Full Text Available Diagrid system has gained a wide acceptance in the design of tall buildings due to its many advantages including its high structural efficiency in resisting both gravity and lateral loads. Most diagrid structures that had been studied have full triangulated members from the ground level to the top of the buildings where comparison in the effectiveness in minimizing the lateral displacement was often made between structures with full diagrid, frame and outrigger system. Nevertheless, no study has been performed on the effectiveness of the diagrid that is constructed above a frame system. The objective of this research is to understand the behavior of the lateral displacement and shear lag effect due to wind load when the diagrid structure is constructed above a frame. Models of sixty storey buildings were analyzed by using Staad.Pro software. The level where the diagrid members started and the spacing of vertical base columns of the frame were altered. The lateral displacement and shear lag effect resembled closely of those of the model of full diagrid when the diagrid was started at level 3, and the vertical base columns were uniformly spaced at 6 metres.

  15. Thermal performance of heavy-weight and light-weight steel frame construction approaches in the central Pretoria climate

    CSIR Research Space (South Africa)

    Kumirai, T

    2013-01-01

    Full Text Available -1 Journal for New Generation Sciences Thermal performance of heavy-weight and light-weight steel frame construction approaches in the central Pretoria climate T Kumirai and DCU Conradie Built Environment, Council for Scientific and Industrial...

  16. Statistical conditional sampling for variable-resolution video compression.

    Directory of Open Access Journals (Sweden)

    Alexander Wong

    Full Text Available In this study, we investigate a variable-resolution approach to video compression based on Conditional Random Field and statistical conditional sampling in order to further improve compression rate while maintaining high-quality video. In the proposed approach, representative key-frames within a video shot are identified and stored at full resolution. The remaining frames within the video shot are stored and compressed at a reduced resolution. At the decompression stage, a region-based dictionary is constructed from the key-frames and used to restore the reduced resolution frames to the original resolution via statistical conditional sampling. The sampling approach is based on the conditional probability of the CRF modeling by use of the constructed dictionary. Experimental results show that the proposed variable-resolution approach via statistical conditional sampling has potential for improving compression rates when compared to compressing the video at full resolution, while achieving higher video quality when compared to compressing the video at reduced resolution.

  17. Redes alternativas de comunicación, framing y la construcción del poder político (Alternative communication networks, framing and construction of political power

    Directory of Open Access Journals (Sweden)

    Mayra Martínez Avidad

    2011-12-01

    Full Text Available El objetivo del presente artículo es analizar el papel de las redes alternativas de comunicación en la construcción del poder político a través del proceso de framing o enmarcado. En los últimos años, la capacidad del público para producir (nuestros propios mensajes que potencialmente desafíen los encuadres fijados por la elite política se ha expandido enormemente con la llegada de Internet y las comunicaciones móviles. En este sentido, las redes virtuales son importantes porque pueden aumentar la capacidad de las masas para comunicarse entre sí transformando los marcos de referencia individuales en marcos interpretativos de carácter colectivo.The aim of this paper is to analyze the role of alternative communication networks in the construction of political power through the process of framing. In recent years, the ability of the public to produce (our own messages that potentially challenge those frames established by political elites has been importantly expanded by the advent of Internet and mobile communications. In this sense, virtual networks are important because they can influence the capacity of masses to communicate with each other transforming individual frames of reference into collective interpretative frames.

  18. Evaluating the quality of sampling frames used in European cross-national surveys

    NARCIS (Netherlands)

    Maineri, A.M.; Scherpenzeel, A.; Bristle, Johanna; Pflüger, Senta-Melissa; Butt, Sarah; Zins, Stefan; Emery, Tom; Luijkx, R.

    This report addresses the quality of the population registers which are currently being used as sampling frames in countries participating in the four cross-European surveys cooperating in SERISS: the European Social Survey (ESS), the European Values Study (EVS), the Gender and Generations Program

  19. Framing Failures in Wood-Frame Hip Roofs under Extreme Wind Loads

    Directory of Open Access Journals (Sweden)

    Sarah A. Stevenson

    2018-02-01

    Full Text Available Wood-frame residential roof failures are among the most common and expensive types of wind damage. Hip roofs are commonly understood to be more resilient during extreme wind in relation to gable roofs. However, inspection of damage survey data from recent tornadoes has revealed a previously unstudied failure mode in which hip roofs suffer partial failure of the framing structure. In the current study, evidence of partial framing failures and statistics of their occurrence are explored and discussed, while the common roof design and construction practice are reviewed. Two-dimensional finite element models are developed to estimate the element-level load effects on hip roof trusses and stick-frame components. The likelihood of failure in each member is defined based on relative demand-to-capacity ratios. Trussed and stick-frame structures are compared to assess the relative performance of the two types of construction. The present analyses verify the common understanding that toenailed roof-to-wall connections are likely to be the most vulnerable elements in the structure of a wood-frame hip roof. However, the results also indicate that certain framing members and connections display significant vulnerability under the same wind uplift, and the possibility of framing failure is not to be discounted. Furthermore, in the case where the roof-to-wall connection uses hurricane straps, certain framing members and joints become the likely points of failure initiation. The analysis results and damage survey observations are used to expand the understanding of wood-frame residential roof failures, as they relate to the Enhanced Fujita Scale and provide assessment of potential gaps in residential design codes.

  20. Wood frame systems for wood homes

    Directory of Open Access Journals (Sweden)

    Julio Cesar Molina

    2010-12-01

    Full Text Available The use of constructive systems that combine strength, speed, with competitive differential techniques and mainly, compromising with the environment, is becoming more popular in Brazil. The constructive system in wood frame for houses of up to five stories is very interesting, because it is a light system, structured in reforested treated wood which allows the combination of several materials, besides allowing speed in the construction and total control of the expenses already in the project phase for being industrialized. The structural behavior of the wood frame is superior to the structural masonry in strength, thermal and acoustic comfort. However, in Brazil, the wood frame is still little known and used, due to lack of technical knowledge about the system, prejudice associated the bad use of the wood as construction material, or still, in some cases, lack of normalization. The aim of this manuscript consists of presenting the main technical characteristics and advantages of the constructive system in wood frame homes, approaching the main stages of the constructive process through examples, showing the materials used in the construction, in addition the main international normative recommendations of the project. Thus, this manuscript also hopes to contribute to the popularization of the wood frame system in Brazil, since it is a competitive, fast and ecologically correct system. Moreover, nowadays, an enormous effort of the technical, commercial and industrial section has been accomplished for the development of this system in the country.

  1. The Frame Game

    Science.gov (United States)

    Edwards, Michael Todd; Cox, Dana C.

    2011-01-01

    In this article, the authors explore framing, a non-multiplicative technique commonly employed by students as they construct similar shapes. When students frame, they add (or subtract) a "border" of fixed width about a geometric object. Although the approach does not yield similar shapes in general, the mathematical underpinnings of…

  2. Dynamical sampling and frame representations with bounded operators

    DEFF Research Database (Denmark)

    Christensen, Ole; Hasannasab, Marzieh; Rashidi, Ehsan

    2017-01-01

    The purpose of this paper is to study frames for a Hilbert space H, having the form {Tnφ}n=0∞ for some φ∈H and an operator T:H→H. We characterize the frames that have such a representation for a bounded operator T, and discuss the properties of this operator. In particular, we prove that the image...... chain of T has finite length N in the overcomplete case; furthermore {Tnφ}n=0∞ has the very particular property that {Tnφ}n=0N−1∪{Tnφ}n=N+ℓ∞ is a frame for H for all ℓ∈N0. We also prove that frames of the form {Tnφ}n=0∞ are sensitive to the ordering of the elements and to norm...

  3. Analisis Framing dalam Riset Public Relations

    Directory of Open Access Journals (Sweden)

    NARAYANA MAHENDRA PRASTYA

    2016-12-01

    Full Text Available This paper aims to give description about how to use frame analysis in Public Relations (PR research. The author use two framing models: Entman and Pan & Kosicki. The object is organization official statement about particular issue. Frame analysis method rarely used in Public Relations research. This methods commonly use in journalism study, to analyse the news in media. Meanwhile, the key word of framing is the social construction of reality. Organization can make social construction of realty in their official statement. In acacemic term, frame analysis in PR research is useful to know how organization positioned themselves in particular situation. Other benefit is use to evaluat whether the organization frame is conformable with the public opinion or agenda setting media or not. In practical term, frame analysis give benefit for PR practitioner to create the message that can be undserstood by public, also give positive image for organization.

  4. The effects of narrative and message framing on engagement and eating intention among a sample of adult Hispanics.

    Science.gov (United States)

    Wirtz, John G; Kulpavaropas, Supathida

    2014-01-01

    To test the effect of narrative messages and gain- and loss-framed messages on persuasive outcomes with a sample of Hispanic adults. A 2 (message type: narrative, non-narrative) × 2 (message frame: gain-framed, loss-framed) between subjects posttest only. Data were collected at 2 outdoor festivals in West Texas. Participants were a convenience sample of 72 Hispanic adults (mean age, 40.6 years). Main outcome measures were message engagement, message relevance, attitude toward message, healthy eating intention, and physical activity intention. Data analysis included analysis of variance and multivariate analysis of variance. There was no significant difference between narrative and non-narrative messages. Gain-framed messages were rated more positively, whereas loss-framed messages were considered more engaging and also produced higher intentions to eat healthy and to become physically active. The interaction between message type and message framing was not significant. Loss-framed messages produced the unanticipated effect of higher message engagement and higher intention. This finding suggests that messages emphasizing losses associated with unhealthy eating and lack of physical activity may be more effective when targeting Hispanic adults than messages emphasizing potential gains. The lack of difference between narrative and non-narrative messages suggests there is no disadvantage to using narratives, but also no advantage. Copyright © 2014 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

  5. serialising languages: satellite-framed, verb-framed or neither

    African Journals Online (AJOL)

    George Saad

    Figure 2: Verb-framed construction type (Slobin 2000: 109). 2 ... 2 An anonymous reviewer asks why we have replaced Talmy's conflation term “Ground” with ..... an S-language may predispose speakers to pay more linguistic attention to.

  6. Discourses of Dehumanization: Enemy Construction and Canadian Media Complicity in the Framing of the War on Terror

    Directory of Open Access Journals (Sweden)

    Erin Steuter

    2009-01-01

    Full Text Available This paper examines the Canadian news media’s coverage of the wars in Afghanistan and Iraq. In particular, Canadian newspaper headlines are examined for the way in which an image of the “enemy” is constructed and framed in dominant media discourse. An analysis of the data reveals a pattern of dehumanizing language applied to enemy leaders as well as Arab and Muslim citizens at large in the media’s uncritical reproduction of metaphors that linguistically frame the enemy in particular ways. Particularly, the paper argues that the Canadian media have participated in mediating constructions of Islam and Muslims, mobilizing familiar metaphors in representations that fabricate an enemy-Other who is dehumanized, de-individualized, and ultimately expendable. This dehumanizing language takes the form of animal imagery that equates and reduces human actions with sub-human behaviours. This paper argues that the repeated use of animal metaphors by monopoly media institutions constitute motivated representations that have ideological importance. The consequences of these representations are more than rhetorical, setting the stage for racist backlash, prisoner abuse and even genocide.

  7. Different Visions of Framing Violence in International Press News

    DEFF Research Database (Denmark)

    Ramirez, Jacobo

    in Mexico and to explore entrepreneurs’ reaction to the covered news. We also analyze journalists’ treatment of this news (Semetko & Valkendurg, 2000) and differences among newspapers from the U.S., Mexico and the European Union (EU). A sample of 200 news histories was constructed by integrating...... international and Mexican newspapers from 2006 to 2012. Our results showed that overall, U.S. and EU newspapers present more news related to violence towards entrepreneurs than Mexican outlets, which more often adopt the avoid strategy (Oliver, 1991). The conflict frame was more widely used in EU newspapers...... than in U.S. and Mexican newspapers, and the economic frame was more present in the U.S. and Mexican press than in the EU press. The morality frame was used more frequently by Mexican journalists than U.S. and European journalists. The results made it possible to observe the effects of framing...

  8. Frames and counter-frames giving meaning to dementia: a framing analysis of media content.

    Science.gov (United States)

    Van Gorp, Baldwin; Vercruysse, Tom

    2012-04-01

    Media tend to reinforce the stigmatization of dementia as one of the most dreaded diseases in western society, which may have repercussions on the quality of life of those with the illness. The persons with dementia, but also those around them become imbued with the idea that life comes to an end as soon as the diagnosis is pronounced. The aim of this paper is to understand the dominant images related to dementia by means of an inductive framing analysis. The sample is composed of newspaper articles from six Belgian newspapers (2008-2010) and a convenience sample of popular images of the condition in movies, documentaries, literature and health care communications. The results demonstrate that the most dominant frame postulates that a human being is composed of two distinct parts: a material body and an immaterial mind. If this frame is used, the person with dementia ends up with no identity, which is in opposition to the Western ideals of personal self-fulfilment and individualism. For each dominant frame an alternative counter-frame is defined. It is concluded that the relative absence of counter-frames confirms the negative image of dementia. The inventory might be a help for caregivers and other professionals who want to evaluate their communication strategy. It is discussed that a more resolute use of counter-frames in communication about dementia might mitigate the stigma that surrounds dementia. Copyright © 2012 Elsevier Ltd. All rights reserved.

  9. Construction sector development: frames and governance responses

    DEFF Research Database (Denmark)

    Jensen, Jens Stissing; Gottlieb, Stefan C.; Thuesen, Christian Langhoff

    2011-01-01

    institutional theory it is suggested that strategic framing activities aiming to conceptualize an industry as a sectoral object of development are likely to generate multiple and incommensurable representations with different and conflicting strategic implications. Second, if faced with a development agenda...

  10. METALLOGRAPHIC SAMPLE PREPARATION STATION-CONSTRUCTIVE CONCEPT

    Directory of Open Access Journals (Sweden)

    AVRAM Florin Timotei

    2016-11-01

    Full Text Available In this paper we propose to present the issues involved in the case of the constructive conception of a station for metallographic sample preparation. This station is destined for laboratory work. The metallographic station is composed of a robot ABB IRB1600, a metallographic microscope, a gripping device, a manipulator, a laboratory grinding and polishing machine. The robot will be used for manipulation of the sample preparation and the manipulator take the sample preparation for processing.

  11. Modern frame structure buildings

    Directory of Open Access Journals (Sweden)

    В. М. Першаков

    2013-07-01

    Full Text Available The article deals with the design, construction and implementation of reinforced concrete frame structures with span 18, 21 m for agricultural production buildings, hall-premises of public buildings and buildings of agricultural aviation. Structures are prefabricated frame buildings and have such advantages as large space inside the structure and lower cost compared with other facilities with same purpose

  12. Computable Frames in Computable Banach Spaces

    Directory of Open Access Journals (Sweden)

    S.K. Kaushik

    2016-06-01

    Full Text Available We develop some parts of the frame theory in Banach spaces from the point of view of Computable Analysis. We define computable M-basis and use it to construct a computable Banach space of scalar valued sequences. Computable Xd frames and computable Banach frames are also defined and computable versions of sufficient conditions for their existence are obtained.

  13. Group Frames With Few Distinct Inner Products and Low Coherence

    KAUST Repository

    Thill, Matthew

    2015-10-01

    Frame theory has been a popular subject in the design of structured signals and codes in recent years, with applications ranging from the design of measurement matrices in compressive sensing, to spherical codes for data compression and data transmission, to spacetime codes for MIMO communications, and to measurement operators in quantum sensing. High-performance codes usually arise from designing frames whose elements have mutually low coherence. Building off the original “group frame” design of Slepian which has since been elaborated in the works of Vale and Waldron, we present several new frame constructions based on cyclic and generalized dihedral groups. Slepian\\'s original construction was based on the premise that group structure allows one to reduce the number of distinct inner pairwise inner products in a frame with n elements from [(n(n-1))/2] to n-1. All of our constructions further utilize the group structure to produce tight frames with even fewer distinct inner product values between the frame elements. When n is prime, for example, we use cyclic groups to construct m-dimensional frame vectors with at most [(n-1)/m] distinct inner products. We use this behavior to bound the coherence of our frames via arguments based on the frame potential, and derive even tighter bounds from combinatorial and algebraic arguments using the group structure alone. In certain cases, we recover well-known Welch bound achieving frames. In cases where the Welch bound has not been achieved, and is not known to be achievable, we obtain frames with close to Welch bound performance.

  14. FRAME CATAGORIZATION OF CONVERSATIONAL INTIMACY

    OpenAIRE

    Lyubov Kit

    2017-01-01

    The article deals with the notion of intimacy. The frame of intimacy is studied on the basis of the linguistic parameters, analysis of text extracts and universal knowledge about intimacy. Frame analysis helped to establish the catagorization of types and nominators of intimate speech genres, their construction in static and dynamic aspects.

  15. Frame Catagorization of Conversational Intimacy

    OpenAIRE

    Lyubov Kit

    2017-01-01

    The article deals with the notion of intimacy. The frame of intimacy is studied on the basis of the linguistic parameters, analysis of text extracts and universal knowledge about intimacy. Frame analysis helped to establish the catagorization of types and nominators of intimate speech genres, their construction in static and dynamic aspects.

  16. Islam and Muslims in U.S. Think Tank Electronic Media: Framing, Narrative, and Ethics

    Directory of Open Access Journals (Sweden)

    Yahya Benkhedda

    2016-12-01

    Full Text Available This paper draws on framing theory and narrative theory as two influential theoretical approaches to the analysis of discourse and communication. It looks into the discourse processes and ethics of framing particular media stories and constructing particular narratives about Islam and Muslims in the official website of the Middle East Forum (MEF, a well-established neoconservative American think tank which specializes in the Middle East. The study examines a representative sample of articles from the website and proposes a model of editorial media discourse analysis based on a problem-solution framing paradigm and a narrative ethical evaluation platform. Findings uncover that the problem-solution frame, which is built on a problem-culprit-cause-solution base and which represents the frame’s cognitive structure is systematically utilized. Four types of framing (religious, political, cultural, and military, two forms (verbal and semiotic, and two functions (persecution and isolation have been detected, constructing persecutive narratives of Muslims as the villains and of Islam as anti-Western, anti-Semitic, and incompatible with modernity. The ethical evaluation shows that these belligerent narratives violate basic standards of ethics and dialogue.

  17. Syntax-driven semantic frame composition in Lexicalized Tree Adjoining Grammars

    Directory of Open Access Journals (Sweden)

    Laura Kallmeyer

    2014-01-01

    Full Text Available The grammar framework presented in this paper combines Lexicalized Tree Adjoining Grammar (LTAG with a (decompositional frame semantics. We introduce elementary constructions as pairs of elementary LTAG trees and decompositional frames. The linking between syntax and semantics can largely be captured by such constructions since in LTAG, elementary trees represent full argument projections. Substitution and adjunction in the syntax then trigger the unification of the associated semantic frames, which are formally defined as base-labelled feature structures. Moreover, the system of elementary constructions is specified in a metagrammar by means of tree and frame descriptions. This metagrammatical factorization gives rise to a fine-grained decomposition of the semantic contributions of syntactic building blocks, and it allows us to separate lexical from constructional contributions and to carve out generalizations across constructions. In the second half of the paper, we apply the framework to the analysis of directed motion expressions and of the dative alternation in English, two well-known examples of the interaction between lexical and constructional meaning.

  18. An Analysis of Environmental Advertising Frames from 1990 to 2010

    OpenAIRE

    VanDyke, Matthew Steven

    2012-01-01

    Recent calls in environmental communication literature suggest researchers should understand the relationships between media message content, message construction, and audience effects. This thesis analyzed environmental advertising frames over time to inform strategic environmental communication research and practice. The study was a media content analysis guided by framing theory. Framing theory asserts the construction of media messages involves the selection and salience of particular mes...

  19. Spacetime transformations from a uniformly accelerated frame

    International Nuclear Information System (INIS)

    Friedman, Yaakov; Scarr, Tzvi

    2013-01-01

    We use the generalized Fermi–Walker transport to construct a one-parameter family of inertial frames which are instantaneously comoving to a uniformly accelerated observer. We explain the connection between our approach and that of Mashhoon. We show that our solutions of uniformly accelerated motion have constant acceleration in the comoving frame. Assuming the weak hypothesis of locality, we obtain local spacetime transformations from a uniformly accelerated frame K′ to an inertial frame K. The spacetime transformations between two uniformly accelerated frames with the same acceleration are Lorentz. We compute the metric at an arbitrary point of a uniformly accelerated frame. (paper)

  20. Framing the text: 'Background studies' and New Testament ...

    African Journals Online (AJOL)

    The notion 'framing the text' is defended to emphasise that history is constructed and always pre supposes a perspective. Framing is a comprehensive activity which adds complexity. Because it engages in historical interpretation and describes aspects of the various levels of context, one's framing activity can be criticised ...

  1. The International Celestial Reference Frame (ICRF) and the Relationship Between Frames

    Science.gov (United States)

    Ma, Chopo

    2000-01-01

    The International Celestial Reference Frame (ICRF), a catalog of VLBI source positions, is now the basis for astrometry and geodesy. Its construction and extension/maintenance will be discussed as well as the relationship of the ICRF, ITRF, and EOP/nutation.

  2. Framing in criminal investigation: How police officers (re)construct a crime.

    Science.gov (United States)

    Salet, Renze

    2017-06-01

    Failures in criminal investigation may lead to wrongful convictions. Insight in the criminal investigation process is needed to understand how these investigative failures may rise and how measures can contribute to the prevention of this kind of failures. Some of the main findings of an empirical study of the criminal investigation process in four cases of major investigations are presented here. This criminal investigation process is analyzed as a process of framing, using Goffman's framing (Goffman, 1975) and interaction theories (Goffman, 1990). It shows that in addition to framing, other substantive and social factors affect the criminal investigation.

  3. Multicriteria Analysis of Assembling Buildings from Steel Frame Structures

    Science.gov (United States)

    Miniotaite, Ruta

    2017-10-01

    Steel frame structures are often used in the construction of public and industrial buildings. They are used for: all types of slope roofs; walls of newly-built public and industrial buildings; load bearing structures; roofs of renovated buildings. The process of assembling buildings from steel frame structures should be analysed as an integrated process influenced by such factors as construction materials and machinery used, the qualification level of construction workers, complexity of work, available finance. It is necessary to find a rational technological design solution for assembling buildings from steel frame structures by conducting a multiple criteria analysis. The analysis provides a possibility to evaluate the engineering considerations and find unequivocal solutions. The rational alternative of a complex process of assembling buildings from steel frame structures was found through multiple criteria analysis and multiple criteria evaluation. In multiple criteria evaluation of technological solutions for assembling buildings from steel frame structures by pairwise comparison method the criteria by significance are distributed as follows: durability is the most important criterion in the evaluation of alternatives; the price (EUR/unit of measurement) of a part of assembly process; construction workers’ qualification level (category); mechanization level of a part of assembling process (%), and complexity of assembling work (in points) are less important criteria.

  4. Approximate equiangular tight frames for compressed sensing and CDMA applications

    Science.gov (United States)

    Tsiligianni, Evaggelia; Kondi, Lisimachos P.; Katsaggelos, Aggelos K.

    2017-12-01

    Performance guarantees for recovery algorithms employed in sparse representations, and compressed sensing highlights the importance of incoherence. Optimal bounds of incoherence are attained by equiangular unit norm tight frames (ETFs). Although ETFs are important in many applications, they do not exist for all dimensions, while their construction has been proven extremely difficult. In this paper, we construct frames that are close to ETFs. According to results from frame and graph theory, the existence of an ETF depends on the existence of its signature matrix, that is, a symmetric matrix with certain structure and spectrum consisting of two distinct eigenvalues. We view the construction of a signature matrix as an inverse eigenvalue problem and propose a method that produces frames of any dimensions that are close to ETFs. Due to the achieved equiangularity property, the so obtained frames can be employed as spreading sequences in synchronous code-division multiple access (s-CDMA) systems, besides compressed sensing.

  5. Pole inflation in Jordan frame supergravity

    Energy Technology Data Exchange (ETDEWEB)

    Saikawa, Ken' ichi [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Yamaguchi, Masahide [Tokyo Institute of Technology, Ookayama (Japan). Dept. of Physics; Yamashita, Yasuho [Kyoto Univ. (Japan). Yukawa Inst. for Theoretical Physics; Yoshida, Daisuke [Montreal Univ., QC (Canada). Dept. of Physics

    2017-09-15

    We investigate inflation models in Jordan frame supergravity, in which an inflaton non-minimally couples to the scalar curvature. By imposing the condition that an inflaton would have the canonical kinetic term in the Jordan frame, we construct inflation models with asymptotically flat potential through pole inflation technique and discuss their relation to the models based on Einstein frame supergravity. We also show that the model proposed by Ferrara et al. has special position and the relation between the Kaehler potential and the frame function is uniquely determined by requiring that scalars take the canonical kinetic terms in the Jordan frame and that a frame function consists only of a holomorphic term (and its anti-holomorphic counterpart) for symmetry breaking terms. Our case corresponds to relaxing the latter condition.

  6. Pole inflation in Jordan frame supergravity

    International Nuclear Information System (INIS)

    Saikawa, Ken'ichi; Yamaguchi, Masahide; Yamashita, Yasuho; Yoshida, Daisuke

    2017-09-01

    We investigate inflation models in Jordan frame supergravity, in which an inflaton non-minimally couples to the scalar curvature. By imposing the condition that an inflaton would have the canonical kinetic term in the Jordan frame, we construct inflation models with asymptotically flat potential through pole inflation technique and discuss their relation to the models based on Einstein frame supergravity. We also show that the model proposed by Ferrara et al. has special position and the relation between the Kaehler potential and the frame function is uniquely determined by requiring that scalars take the canonical kinetic terms in the Jordan frame and that a frame function consists only of a holomorphic term (and its anti-holomorphic counterpart) for symmetry breaking terms. Our case corresponds to relaxing the latter condition.

  7. ``Frames of Reference'' revisited

    Science.gov (United States)

    Steyn-Ross, Alistair; Ivey, Donald G.

    1992-12-01

    The PSSC teaching film, ``Frames of Reference,'' was made in 1960, and was one of the first audio-visual attempts at showing how your physical ``point of view,'' or frame of reference, necessarily alters both your perceptions and your observations of motion. The gentle humor and original demonstrations made a lasting impact on many audiences, and with its recent re-release as part of the AAPT Cinema Classics videodisc it is timely that we should review both the message and the methods of the film. An annotated script and photographs from the film are presented, followed by extension material on rotating frames which teachers may find appropriate for use in their classrooms: constructions, demonstrations, an example, and theory.

  8. Quantum reference frames and their applications to thermodynamics.

    Science.gov (United States)

    Popescu, Sandu; Sainz, Ana Belén; Short, Anthony J; Winter, Andreas

    2018-07-13

    We construct a quantum reference frame, which can be used to approximately implement arbitrary unitary transformations on a system in the presence of any number of extensive conserved quantities, by absorbing any back action provided by the conservation laws. Thus, the reference frame at the same time acts as a battery for the conserved quantities. Our construction features a physically intuitive, clear and implementation-friendly realization. Indeed, the reference system is composed of the same types of subsystems as the original system and is finite for any desired accuracy. In addition, the interaction with the reference frame can be broken down into two-body terms coupling the system to one of the reference frame subsystems at a time. We apply this construction to quantum thermodynamic set-ups with multiple, possibly non-commuting conserved quantities, which allows for the definition of explicit batteries in such cases.This article is part of a discussion meeting issue 'Foundations of quantum mechanics and their impact on contemporary society'. © 2018 The Author(s).

  9. Dual pairs of gabor frames for trigonometric generators without the partition of unity property

    DEFF Research Database (Denmark)

    Christensen, Ole; Jakobsen, Mads Sielemann

    2011-01-01

    Frames is a strong tool to obtain series expansions in Hilbert spaces under less restrictive conditions than imposed by orthonormal bases. In order to apply frame theory it is necessary to construct a pair of so called dual frames. The goal of the article is to provide explicit constructions...... of dual pairs of frames having Gabor structure. Unlike the results presented in the literature we do not base the constructions on a generator satisfying the partition of unity constraint....

  10. Constructing and sampling directed graphs with given degree sequences

    International Nuclear Information System (INIS)

    Kim, H; Del Genio, C I; Bassler, K E; Toroczkai, Z

    2012-01-01

    The interactions between the components of complex networks are often directed. Proper modeling of such systems frequently requires the construction of ensembles of digraphs with a given sequence of in- and out-degrees. As the number of simple labeled graphs with a given degree sequence is typically very large even for short sequences, sampling methods are needed for statistical studies. Currently, there are two main classes of methods that generate samples. One of the existing methods first generates a restricted class of graphs and then uses a Markov chain Monte-Carlo algorithm based on edge swaps to generate other realizations. As the mixing time of this process is still unknown, the independence of the samples is not well controlled. The other class of methods is based on the configuration model that may lead to unacceptably many sample rejections due to self-loops and multiple edges. Here we present an algorithm that can directly construct all possible realizations of a given bi-degree sequence by simple digraphs. Our method is rejection-free, guarantees the independence of the constructed samples and provides their weight. The weights can then be used to compute statistical averages of network observables as if they were obtained from uniformly distributed sampling or from any other chosen distribution. (paper)

  11. Frame analysis of UNNES electric bus chassis construction using finite element method

    Science.gov (United States)

    Nugroho, Untoro; Anis, Samsudin; Kusumawardani, Rini; Khoiron, Ahmad Mustamil; Maulana, Syahdan Sigit; Irvandi, Muhammad; Mashdiq, Zia Putra

    2018-03-01

    Designing the chassis needs to be done element simulation analysis to gain chassis strength on an electric bus. The purpose of this research is to get the results of chassis simulation on an electric bus when having load use FEM (Finite element method). This research was conduct in several stages of process, such as modeling chassis by Autodesk Inventor and finite element simulation software. The frame is going to be simulated with static loading by determine fixed support and then will be given the vertical force. The fixed on the frame is clamped at both the front and rear suspensions. After the simulation based on FEM it can conclude that frame is still under elastic zone, until the frame design is safe to use.

  12. Social Marketing Risk-Framing Approaches for Dental Sealants in Rural American Indian Children.

    Science.gov (United States)

    Larsson, Laura S; Champine, Dorothy; Hoyt, Dee; Lin, Lillian; Salois, Emily; Silvas, Sharon; Tail, Terri Weasel; Williams, Matthew

    2015-01-01

    To compare three variants of a culturally relevant and theoretically based message to determine the most influential risk-framing approach for improving intention to place dental sealants for preschool children. A convenience sample of adult, American Indian participants (n = 89) attending a community health fair were assigned to view a gain-framed, loss-framed, or mix-framed dental sealant message. We compared participants' scores on a 46-item survey to determine the relative effect of the frame assignment on seven indices of behavior change. The mean difference in participants' stage-of-change scores (x = 1.17, n = 89, SD = 1.90) demonstrated a significant improvement for all groups after watching the dental sealant message t88  = 5.81, p mix-framed message resulted in the highest scores. The gain-framed message was the least influential on four constructs. This finding is in contrast to findings that gain-framed oral health messages are most influential (Gallagher & Updegraff, 2012; O'Keefe & Jensen, 2007). Community advisory board members determined to use the mix-framed approach in an oral health social marketing campaign with a rural, American Indian audience. © 2015 Wiley Periodicals, Inc.

  13. Framing of regimes and transition strategies

    DEFF Research Database (Denmark)

    Jensen, Jens Stissing

    2012-01-01

    This article suggests that transition strategies are always formulated in the context of specific representations of the regime and the challenges it faces. It is argued that the framing of a regime affects the envisioning of transition strategies. An analysis of the current development agenda...... for the housing construction sector in Denmark reveals the relevance and impacts of different regime framings. It is proposed that the ability to cope with framing issues as situated and political processes is at the core of the governance of transitions....

  14. On Dual Gabor Frame Pairs Generated by Polynomials

    DEFF Research Database (Denmark)

    Christensen, Ole; Rae Young, Kim

    2010-01-01

    We provide explicit constructions of particularly convenient dual pairs of Gabor frames. We prove that arbitrary polynomials restricted to sufficiently large intervals will generate Gabor frames, at least for small modulation parameters. Unfortunately, no similar function can generate a dual Gabo...

  15. Three-dimensional construction and omni-directional rolling analysis of a novel frame-like lattice modular robot

    Science.gov (United States)

    Ding, Wan; Wu, Jianxu; Yao, Yan'an

    2015-07-01

    Lattice modular robots possess diversity actuation methods, such as electric telescopic rod, gear rack, magnet, robot arm, etc. The researches on lattice modular robots mainly focus on their hardware descriptions and reconfiguration algorithms. Meanwhile, their design architectures and actuation methods perform slow telescopic and moving speeds, relative low actuation force verse weight ratio, and without internal space to carry objects. To improve the mechanical performance and reveal the locomotion and reconfiguration binary essences of the lattice modular robots, a novel cube-shaped, frame-like, pneumatic-based reconfigurable robot module called pneumatic expandable cube(PE-Cube) is proposed. The three-dimensional(3D) expanding construction and omni-directional rolling analysis of the constructed robots are the main focuses. The PE-Cube with three degrees of freedom(DoFs) is assembled by replacing the twelve edges of a cube with pneumatic cylinders. The proposed symmetric construction condition makes the constructed robots possess the same properties in each supporting state, and a binary control strategy cooperated with binary actuator(pneumatic cylinder) is directly adopted to control the PE-Cube. Taking an eight PE-Cube modules' construction as example, its dynamic rolling simulation, static rolling condition, and turning gait are illustrated and discussed. To testify telescopic synchronization, respond speed, locomotion feasibility, and repeatability and reliability of hardware system, an experimental pneumatic-based robotic system is built and the rolling and turning experiments of the eight PE-Cube modules' construction are carried out. As an extension, the locomotion feasibility of a thirty-two PE-Cube modules' construction is analyzed and proved, including dynamic rolling simulation, static rolling condition, and dynamic analysis in free tipping process. The proposed PE-Cube module, construction method, and locomotion analysis enrich the family of the

  16. Frames and semi-frames

    International Nuclear Information System (INIS)

    Antoine, Jean-Pierre; Balazs, Peter

    2011-01-01

    Loosely speaking, a semi-frame is a generalized frame for which one of the frame bounds is absent. More precisely, given a total sequence in a Hilbert space, we speak of an upper (resp. lower) semi-frame if only the upper (resp. lower) frame bound is valid. Equivalently, for an upper semi-frame, the frame operator is bounded, but has an unbounded inverse, whereas a lower semi-frame has an unbounded frame operator, with a bounded inverse. We study mostly upper semi-frames, both in the continuous and discrete case, and give some remarks for the dual situation. In particular, we show that reconstruction is still possible in certain cases.

  17. From individual preference construction to group decisions: framing effects and group processes

    NARCIS (Netherlands)

    Milch, K.F.; Weber, E.U.; Appelt, K.C.; Handgraaf, M.J.J.; Krantz, D.H.

    2009-01-01

    Two choice tasks known to produce framing effects in individual decisions were used to test group sensitivity to framing, relative to that of individuals, and to examine the effect of prior, individual consideration of a decision on group choice. Written post-decision reasons and pre-decision group

  18. Seismic Performance Comparison of a High-Content SDA Frame and Standard RC Frame

    Directory of Open Access Journals (Sweden)

    John W. van de Lindt

    2011-01-01

    Full Text Available This study presents the method and results of an experiment to study the seismic behavior of a concrete portal frame with fifty percent of its cement content replaced with a spray dryer ash (SDA. Based on multiple-shake-table tests, the high content SDA frame was found to perform as well as the standard concrete frame for two earthquakes exceeding design-level intensity earthquakes. Hence, from a purely seismic/structural standpoint, it may be possible to replace approximately fifty percent of cement in a concrete mix with SDA for the construction of structural members in high seismic zones. This would help significantly redirect spray dryer ash away from landfills, thus, providing a sustainable greener alternative to concrete that uses only Portland cement, or only a small percentage of SDA or fly ash.

  19. The Framing of Calvin Klein: A Frame Analysis of Media Discourse about the August 1995 Calvin Klein Jeans Advertising Campaign.

    Science.gov (United States)

    Tucker, Lauren R.

    1998-01-01

    Deconstructs the "kiddie porn" media frame used by the industry and mainstream media to characterize Klein's ad campaign. Extends scholarship on the construction of youth in the media, showing how the kiddie-porn frame produces and reproduces common-sense beliefs about the nature of youth. Suggests a metadiscourse encompassing the…

  20. The particle analysis based on FT-TIMS technique for swipe sample under the frame of nuclear safeguard

    International Nuclear Information System (INIS)

    Yang Tianli; Liu Xuemei; Liu Zhao; Tang Lei; Long Kaiming

    2008-06-01

    Under the frame of nuclear safeguard, the particles analysis for swipe sample is an advance mean to detect the undeclared uranium enriched facilities and undeclared uranium enriched activity. The technique of particle analysis based on fission track-thermal ionization mass spectrometry (FT-TIMS) for swipe sample have been built. The reliability and the experimental background for selecting particles consisting of uranium from swipe sample by FT method have been verified. In addition, the utilization coefficient of particles on the surface of swipe sample have also been tested. These works have provided the technique support for application in the area of nuclear verification. (authors)

  1. Geometric Properties of Grassmannian Frames for and

    Directory of Open Access Journals (Sweden)

    Benedetto John J

    2006-01-01

    Full Text Available Grassmannian frames are frames satisfying a min-max correlation criterion. We translate a geometrically intuitive approach for two- and three-dimensional Euclidean space ( and into a new analytic method which is used to classify many Grassmannian frames in this setting. The method and associated algorithm decrease the maximum frame correlation, and hence give rise to the construction of specific examples of Grassmannian frames. Many of the results are known by other techniques, and even more generally, so that this paper can be viewed as tutorial. However, our analytic method is presented with the goal of developing it to address unresovled problems in -dimensional Hilbert spaces which serve as a setting for spherical codes, erasure channel modeling, and other aspects of communications theory.

  2. The Stone–Čech compactification of a partial frame via ideals and ...

    African Journals Online (AJOL)

    A partial frame is a meet-semilattice in which certain designated subsets are required to have joins, and finite meets distribute over these. The designated subsets are specified by means of a so-called selection function, denoted by S; these partial frames are called S-frames. We construct free frames over S-frames using ...

  3. Does positive framing matter? An investigation of how framing affects consumers’ willingness to buy green electricity in Denmark

    DEFF Research Database (Denmark)

    Yang, Yingkui; Solgaard, Hans Stubbe; Ren, Jingzheng

    2018-01-01

    We investigate how framing affect consumers’ willingness to buy green electricity using a contingent valuation method. A sample of 1022 respondents was divided into two nearly equal sized sub-samples chosen from an Internet panel. One subsample received a positively framed version of the question...

  4. Putting Safety in the Frame

    Directory of Open Access Journals (Sweden)

    Valerie Jean O’Keeffe

    2015-06-01

    Full Text Available Current patient safety policy focuses nursing on patient care goals, often overriding nurses’ safety. Without understanding how nurses construct work health and safety (WHS, patient and nurse safety cannot be reconciled. Using ethnography, we examine social contexts of safety, studying 72 nurses across five Australian hospitals making decisions during patient encounters. In enacting safe practice, nurses used “frames” built from their contextual experiences to guide their behavior. Frames are produced by nurses, and they structure how nurses make sense of their work. Using thematic analysis, we identify four frames that inform nurses’ decisions about WHS: (a communicating builds knowledge, (b experiencing situations guides decisions, (c adapting procedures streamlines work, and (d team working promotes safe working. Nurses’ frames question current policy and practice by challenging how nurses’ safety is positioned relative to patient safety. Recognizing these frames can assist the design and implementation of effective WHS management.

  5. Frame And Blame An Analysis Of How Local Newspaper Framed The Conflict Between Confentional And Technological Application-Based Transportation In Medan

    Directory of Open Access Journals (Sweden)

    Deka Harwinta Zianur

    2017-06-01

    Full Text Available The title of the research was Frame and Blame An Analysis of How Local Newspapers Framed the Conflict Between Conventional and Technological Application-Based Transportation Service in Medan. Waspada Daily Newspaper as local newspapers more frequently put a human face on the issue while national papers more frequently framed it a moral wrong. The objective of the research was to find out how the newspaper constructs the news about this conflict and how it explains the conflict as part of its social responsibility in its news product. The research used qualitative method with paradigm constructivism which considers the subject Waspada Daily News as the central factor in the communicative activity and social relationsand as the function of control toward social facts which occur in society the conflict between motor pedicab drivers and go-jek riders. Framing analysis is a descriptive textual analysis of media used to find out how news is understood and framed by media. The research used Gamson and Modegliani framing model analysis based on constructivism approach in order to find out the representation of media. The theory of Berger and Luckman Reality Construction was used to explain social reality constructed through the process of externalization objectivity and internalization. The result of the research showed that 1 Waspada Daily Newspaper prioritized the conflict because the conflict was the effect of the lack of income of motor pedicab driver and also because there was no regulation on the transportationoperation of Go-Jek online 2 Waspada Daily News exposed the conflict in the front page in four days consecutively which indicated that there were attention and seriousness of moral evaluations.

  6. Constructed-Response Matching to Sample and Spelling Instruction.

    Science.gov (United States)

    Dube, William V.; And Others

    1991-01-01

    This paper describes a computer-based spelling program grounded in programed instructional techniques and using constructed-response matching-to-sample procedures. Following use of the program, two mentally retarded men successfully spelled previously misspelled words. (JDD)

  7. Key Frame Extraction in the Summary Space.

    Science.gov (United States)

    Li, Xuelong; Zhao, Bin; Lu, Xiaoqiang; Xuelong Li; Bin Zhao; Xiaoqiang Lu; Lu, Xiaoqiang; Li, Xuelong; Zhao, Bin

    2018-06-01

    Key frame extraction is an efficient way to create the video summary which helps users obtain a quick comprehension of the video content. Generally, the key frames should be representative of the video content, meanwhile, diverse to reduce the redundancy. Based on the assumption that the video data are near a subspace of a high-dimensional space, a new approach, named as key frame extraction in the summary space, is proposed for key frame extraction in this paper. The proposed approach aims to find the representative frames of the video and filter out similar frames from the representative frame set. First of all, the video data are mapped to a high-dimensional space, named as summary space. Then, a new representation is learned for each frame by analyzing the intrinsic structure of the summary space. Specifically, the learned representation can reflect the representativeness of the frame, and is utilized to select representative frames. Next, the perceptual hash algorithm is employed to measure the similarity of representative frames. As a result, the key frame set is obtained after filtering out similar frames from the representative frame set. Finally, the video summary is constructed by assigning the key frames in temporal order. Additionally, the ground truth, created by filtering out similar frames from human-created summaries, is utilized to evaluate the quality of the video summary. Compared with several traditional approaches, the experimental results on 80 videos from two datasets indicate the superior performance of our approach.

  8. Framing From Experience: Cognitive Processes and Predictions of Risky Choice.

    Science.gov (United States)

    Gonzalez, Cleotilde; Mehlhorn, Katja

    2016-07-01

    A framing bias shows risk aversion in problems framed as "gains" and risk seeking in problems framed as "losses," even when these are objectively equivalent and probabilities and outcomes values are explicitly provided. We test this framing bias in situations where decision makers rely on their own experience, sampling the problem's options (safe and risky) and seeing the outcomes before making a choice. In Experiment 1, we replicate the framing bias in description-based decisions and find risk indifference in gains and losses in experience-based decisions. Predictions of an Instance-Based Learning model suggest that objective probabilities as well as the number of samples taken are factors that contribute to the lack of framing effect. We test these two factors in Experiment 2 and find no framing effect when a few samples are taken but when large samples are taken, the framing effect appears regardless of the objective probability values. Implications of behavioral results and cognitive modeling are discussed. Copyright © 2015 Cognitive Science Society, Inc.

  9. CAST-IN-PLACE BUILDING FRAME AND ITS FEATURES AT SEPARATE LIFE CYCLES

    Directory of Open Access Journals (Sweden)

    Koyankin Aleksandr Aleksandrovich

    2015-09-01

    Full Text Available Modern intensive development of precast-cast-in-place construction has led to creation of a wide range of various constructive systems of buildings during the last 100 years. They allow constructing buildings with best account of the requirements of functionality, architectural expressiveness, production possibilities of construction companies, etc. However in spite of this development both precast and cast-in-place housing construction has its peculiarities, positive and negative ones. The constructive systems of precast monolithic buildings existing at the moment are based on the required mutual deformation of prefabricated reinforced and cast iron reinforced concrete at the stage of a building construction and at the stage of its use as well. Having refused from this rule, the authors of this article have introduced a constructive system of a precast monolithic building able to bear loads, developing at the stage of erection (due to completion of a precast frame and at the stage of use (due to completion of a precast monolithic frame. The offered construction of a precast monolithic building frame allows efficiently using the advantages of precast and cast-in-place construction minimizing their disadvantages and it also fully corresponds to the obligatory requirements to buildings. The corresponding patents are obtained.

  10. Framing a Bank

    DEFF Research Database (Denmark)

    Holmgreen, Lise-Lotte

    2012-01-01

    Danish bank, Danske Bank, during the 2008 financial crisis and hence in shaping its image projected to the public. Through the study of a number of semantic frames adopted by the Danish print press and those adopted by the Bank, this article will argue for the constructions of the press putting...... considerable strain on the Bank and its image, leading it to reconsider its previous strategy of denial of responsibility...

  11. Framing and visual type: Effect on future Zika vaccine uptake intent

    Directory of Open Access Journals (Sweden)

    Jeanine P.D. Guidry

    2018-04-01

    Design and methods: In order to study the effects of Zika message framing (gain vs. loss and visual type (photo vs. infographic on future Zika vaccine uptake intent, a 2×2 between-subjects experiment was performed via an online survey in 2017 among 339 U.S. women of reproductive age (18-49 years. Participants were exposed to one of four messages, all resembling Instagram posts: gain-framed vs. loss-framed infographic, and gain-framed vs. loss-framed photo. These messages were followed by questions about Zika vaccine uptake intent as well as intermediate psychosocial variables that could lead to intent. Results: There was no interaction between framing and visual type (P=0.116, and there was no effect for framing (P=0.185 or visual type (P=0.724 on future Zika vaccine uptake intent, which is likely indicative of insufficient dosage of the intervention. However, when focusing on intermediate psychosocial constructs that are known to influence behavior and intent, gain-framed messages were more effective in increasing subjective norms (P=0.005 as related to a future Zika vaccine, as well as perceived benefits (P=0.016 and self-efficacy (P=0.032. Conclusions: Gain-framed messages seem to be more effective than loss-framed messages to increase several constructs that could, in turn, affect future Zika vaccine uptake intent. This is a novel finding since, traditionally, loss-framed messages are considered more beneficial in promoting vaccine-related health behaviors.

  12. Construction of high-quality Caco-2 three-frame cDNA library and its application to yeast two-hybrid for the human astrovirus protein-protein interaction.

    Science.gov (United States)

    Zhao, Wei; Li, Xin; Liu, Wen-Hui; Zhao, Jian; Jin, Yi-Ming; Sui, Ting-Ting

    2014-09-01

    Human epithelial colorectal adenocarcinoma (Caco-2) cells are widely used as an in vitro model of the human small intestinal mucosa. Caco-2 cells are host cells of the human astrovirus (HAstV) and other enteroviruses. High quality cDNA libraries are pertinent resources and critical tools for protein-protein interaction research, but are currently unavailable for Caco-2 cells. To construct a three-open reading frame, full length-expression cDNA library from the Caco-2 cell line for application to HAstV protein-protein interaction screening, total RNA was extracted from Caco-2 cells. The switching mechanism at the 5' end of the RNA transcript technique was used for cDNA synthesis. Double-stranded cDNA was digested by Sfi I and ligated to reconstruct a pGADT7-Sfi I three-frame vector. The ligation mixture was transformed into Escherichia coli HST08 premium electro cells by electroporation to construct the primary cDNA library. The library capacity was 1.0×10(6)clones. Gel electrophoresis results indicated that the fragments ranged from 0.5kb to 4.2kb. Randomly picked clones show that the recombination rate was 100%. The three-frame primary cDNA library plasmid mixture (5×10(5)cfu) was also transformed into E. coli HST08 premium electro cells, and all clones were harvested to amplify the cDNA library. To detect the sufficiency of the cDNA library, HAstV capsid protein as bait was screened and tested against the Caco-2 cDNA library by a yeast two-hybrid (Y2H) system. A total of 20 proteins were found to interact with the capsid protein. These results showed that a high-quality three-frame cDNA library from Caco-2 cells was successfully constructed. This library was efficient for the application to the Y2H system, and could be used for future research. Copyright © 2014 Elsevier B.V. All rights reserved.

  13. Framing the Iraq war: a cross-national comparison of newspaper framing in four Western countries

    NARCIS (Netherlands)

    Vliegenthart, R.; Schröder, H.

    2010-01-01

    In this paper we compare the newspaper attention for and framing of the Iraq issue in four Western countries (US, UK, Germany and the Netherlands) during the period September 2002 until August 2003. Using computer assisted coding based on wordlists constructed by human coders, we analyzed more than

  14. An introduction to frames and Riesz bases

    CERN Document Server

    Christensen, Ole

    2016-01-01

    This revised and expanded monograph presents the general theory for frames and Riesz bases in Hilbert spaces as well as its concrete realizations within Gabor analysis, wavelet analysis, and generalized shift-invariant systems.  Compared with the first edition, more emphasis is put on explicit constructions with attractive properties.  Based on the exiting development of frame theory over the last decade, this second edition now includes new sections on the rapidly growing fields of LCA groups, generalized shift-invariant systems, duality theory for as well Gabor frames as wavelet frames, and open problems in the field.   Key features include: *Elementary introduction to frame theory in finite-dimensional spaces * Basic results presented in an accessible way for both pure and applied mathematicians * Extensive exercises make the work suitable as a textbook for use in graduate courses * Full proofs includ ed in introductory chapters; only basic knowledge of functional analysis required * Explicit constructi...

  15. Alternative Shear Panel Configurations for Light Wood Construction. Development, Seismic Performance, and Design Guidance

    Science.gov (United States)

    Wilcoski, James; Fischer, Chad; Allison, Tim; Malach, Kelly Jo

    2002-04-01

    Shear panels are used in light wood construction to resist lateral loads resulting from earthquakes or strong winds. These panels are typically made of wooden sheathing nailed to building frame members, but this standard panel design interferes with the installation of sheet insulation. A non-insulated shear panel conducts heat between the building interior and exterior wasting considerable amounts of energy. Several alternative shear panel designs were developed to avoid this insulation-mounting problem and sample panels were tested according to standard cyclic test protocols. One of the alternative designs consisted of diagonal steel straps nailed directly to the structural framing. Several others consisted of sheathing nailed to 2 x 4 framing then set into a larger 2 x 6 structural frame in such a way that no sheathing protruded beyond the edge of the 2 x 6 members. Also samples of industry-standard shear panels were constructed and tested in order to establish a performance baseline. Analytical models were developed to size test panels and predict panel behavior. A procedure was developed for establishing design capacities based on both test data and established baseline panel design capacity. The behavior of each panel configuration is documented and recommended design capacities are presented.

  16. Just Add a Verse from the Quran: Effects of Religious Rhetoric in Gain- and Loss-Framed Anti-Alcohol Messages with a Palestinian Sample.

    Science.gov (United States)

    Alhabash, Saleem; Almutairi, Nasser; Rub, Mohammad Abu

    2017-10-01

    This experiment investigated the effects of message framing (gain vs. loss) and religious rhetoric (religious vs. non-religious) on the expression of anti-alcohol civic intentions with a sample (N = 80) of Palestinian young adults. Results showed that the main effects of message framing (gain > loss) and religious rhetoric (non-religious > religious) on anti-alcohol civic intentions were significant. Furthermore, the study showed that viral behavioral intentions were strongly and significantly associated with expressing anti-alcohol civic intentions, with larger explanatory power for gain-framed PSAs that used a religious rhetoric. Additionally, a serial mediation model showed that the effect of religious rhetoric on anti-alcohol civic intentions was successfully mediated by the serial combination of attitudes toward the PSA and viral behavioral intention for gain-framed PSAs, but not for loss-framed PSAs. Findings are discussed within the framework of persuasion models.

  17. Message Framing and Physical Activity Promotion in Colorectal Cancer Survivors.

    Science.gov (United States)

    Hirschey, Rachel; Lipkus, Isaac; Jones, Lee; Mantyh, Christopher; Sloane, Richard; Demark-Wahnefried, Wendy

    2016-11-01

    To test effects of gain-framed versus loss-framed mailed brochures on increasing physical activity (PA) among colorectal cancer (CRC) survivors.
. Randomized trial with repeated measures at baseline, 1 month, and 12 months postintervention.
. Mail recruitment from tumor registries.
. 148 inactive CRC survivors who had completed primary therapy. 
. PA and constructs from the Theory of Planned Behavior (TPB) were assessed at baseline, 1 month, and 12 months. Participants were randomized to receive pamphlets describing PA benefits (gain framed) or disadvantages of not being physically active (loss framed). Baseline characteristics were compared using descriptive statistics. Repeated measures linear models were used to test PA changes.
. Minutes of PA and TPB constructs.
. Significant PA increases were observed in both study arms. Results did not differ by message frame. At one month, about 25% of previously inactive participants increased activity to national recommendations. Those who increased PA compared to those who did not had higher baseline scores on subjective norms, perceived behavioral control, and PA intentions. 
. Independent of message framing, mailed brochures are highly effective in producing within-subject short- and long-term increases in PA.
. CRC survivors may increase short- and long-term levels of PA by receiving inexpensive print brochures.

  18. Frames and operator theory in analysis and signal processing

    CERN Document Server

    Larson, David R; Nashed, Zuhair; Nguyen, Minh Chuong; Papadakis, Manos

    2008-01-01

    This volume contains articles based on talks presented at the Special Session Frames and Operator Theory in Analysis and Signal Processing, held in San Antonio, Texas, in January of 2006. Recently, the field of frames has undergone tremendous advancement. Most of the work in this field is focused on the design and construction of more versatile frames and frames tailored towards specific applications, e.g., finite dimensional uniform frames for cellular communication. In addition, frames are now becoming a hot topic in mathematical research as a part of many engineering applications, e.g., matching pursuits and greedy algorithms for image and signal processing. Topics covered in this book include: Application of several branches of analysis (e.g., PDEs; Fourier, wavelet, and harmonic analysis; transform techniques; data representations) to industrial and engineering problems, specifically image and signal processing. Theoretical and applied aspects of frames and wavelets. Pure aspects of operator theory empha...

  19. Design Solutions for Sustainable Construction of Pre Engineered Steel Buildings

    Directory of Open Access Journals (Sweden)

    Muhammad Umair Saleem

    2018-05-01

    Full Text Available Sustainable construction of ecofriendly infrastructure has been the priority of worldwide researchers. The induction of modern technology in the steel manufacturing industry has enabled designers to get the desired control over the steel section shapes and profiles resulting in efficient use of construction material and manufacturing energy required to produce these materials. The current research study is focused on the optimization of steel building costs with the use of pre-engineered building construction technology. Construction of conventional steel buildings (CSB incorporates the use of hot rolled sections, which have uniform cross-section throughout the length. However, pre-engineered steel buildings (PEB utilize steel sections, which are tailored and profiled based on the required loading effects. In this research study, the performance of PEB steel frames in terms of optimum use of steel sections and its comparison with the conventional steel building is presented in detail. A series of PEB and CSB steel frames is selected and subjected to various loading conditions. Frames were analyzed using Finite Element Based analysis tool and design was performed using American Institute of Steel Construction design specifications. Comparison of the frames has been established in terms of frame weights, lateral displacements (sway and vertical displacements (deflection of the frames. The results have clearly indicated that PEB steel frames are not only the most economical solution due to lesser weight of construction but also have shown better performance compared to CSB frames.

  20. Framing the frame

    Directory of Open Access Journals (Sweden)

    Todd McElroy

    2007-08-01

    Full Text Available We examined how the goal of a decision task influences the perceived positive, negative valence of the alternatives and thereby the likelihood and direction of framing effects. In Study 1 we manipulated the goal to increase, decrease or maintain the commodity in question and found that when the goal of the task was to increase the commodity, a framing effect consistent with those typically observed in the literature was found. When the goal was to decrease, a framing effect opposite to the typical findings was observed whereas when the goal was to maintain, no framing effect was found. When we examined the decisions of the entire population, we did not observe a framing effect. In Study 2, we provided participants with a similar decision task except in this situation the goal was ambiguous, allowing us to observe participants' self-imposed goals and how they influenced choice preferences. The findings from Study 2 demonstrated individual variability in imposed goal and provided a conceptual replication of Study 1. %need keywords

  1. Shortening of construction period of nuclear power plant. Activities of construction industry on construction period shortening

    International Nuclear Information System (INIS)

    Kamata, Hirofumi

    2011-01-01

    Total construction period could be shorten by prefabricating structures efficiently in another yard and reducing working hours on site, which would reduce work at height or congestion work and also upgrade safety at work. Construction period shortening would surely reduce expenses during work and advance operation start of electric utilities. Construction of reactor building, turbine building, water intake and drainage canal was performed on a relatively large scale and a big share of whole schedule. This article summarized basic technologies to shorten construction period for reactor building/turbine building and water intake and drainage canal. Advanced methods of reactor building/turbine building; (1) modularization of equipment and skeleton, (2) utilization of concrete mold, reinforcing bar and steel frame, (3) precedent steel frame method and (4) steel plate reinforced concrete (SC) method, were outlined and their application examples were shown to reduce work on site and improve work efficiency. As for water intake and drainage canal construction, (1) precast concrete method, (2) SC method and (3) steel plate shell method were described with application examples. Construction procedures and problems using mega block method for water intake and drainage canal were also introduced. (T. Tanaka)

  2. Framing the frame

    OpenAIRE

    Todd McElroy; John J. Seta

    2007-01-01

    We examined how the goal of a decision task influences the perceived positive, negative valence of the alternatives and thereby the likelihood and direction of framing effects. In Study 1 we manipulated the goal to increase, decrease or maintain the commodity in question and found that when the goal of the task was to increase the commodity, a framing effect consistent with those typically observed in the literature was found. When the goal was to decrease, a framing effect opposite to the ty...

  3. Adaptive wavelet tight frame construction for accelerating MRI reconstruction

    Directory of Open Access Journals (Sweden)

    Genjiao Zhou

    2017-09-01

    Full Text Available The sparsity regularization approach, which assumes that the image of interest is likely to have sparse representation in some transform domain, has been an active research area in image processing and medical image reconstruction. Although various sparsifying transforms have been used in medical image reconstruction such as wavelet, contourlet, and total variation (TV etc., the efficiency of these transforms typically rely on the special structure of the underlying image. A better way to address this issue is to develop an overcomplete dictionary from the input data in order to get a better sparsifying transform for the underlying image. However, the general overcomplete dictionaries do not satisfy the so-called perfect reconstruction property which ensures that the given signal can be perfectly represented by its canonical coefficients in a manner similar to orthonormal bases, resulting in time consuming in the iterative image reconstruction. This work is to develop an adaptive wavelet tight frame method for magnetic resonance image reconstruction. The proposed scheme incorporates the adaptive wavelet tight frame approach into the magnetic resonance image reconstruction by solving a l0-regularized minimization problem. Numerical results show that the proposed approach provides significant time savings as compared to the over-complete dictionary based methods with comparable performance in terms of both peak signal-to-noise ratio and subjective visual quality.

  4. Continuous Shearlet Tight Frames

    KAUST Repository

    Grohs, Philipp

    2010-10-22

    Based on the shearlet transform we present a general construction of continuous tight frames for L2(ℝ2) from any sufficiently smooth function with anisotropic moments. This includes for example compactly supported systems, piecewise polynomial systems, or both. From our earlier results in Grohs (Technical report, KAUST, 2009) it follows that these systems enjoy the same desirable approximation properties for directional data as the previous bandlimited and very specific constructions due to Kutyniok and Labate (Trans. Am. Math. Soc. 361:2719-2754, 2009). We also show that the representation formulas we derive are in a sense optimal for the shearlet transform. © 2010 Springer Science+Business Media, LLC.

  5. Message framing and perinatal decisions.

    Science.gov (United States)

    Haward, Marlyse F; Murphy, Ryan O; Lorenz, John M

    2008-07-01

    The purpose of this study was to explore the effect of information framing on parental decisions about resuscitation of extremely premature infants. Secondary outcomes focused on elucidating the impact of other variables on treatment choices and determining whether those effects would take precedence over any framing effects. This confidential survey study was administered to adult volunteers via the Internet. The surveys depicted a hypothetical vignette of a threatened delivery at gestational age of 23 weeks, with prognostic outcome information framed as either survival with lack of disability (positive frame) or chance of dying and likelihood of disability among survivors (negative frame). Participants were randomly assigned to receive either the positively or negatively framed vignette. They were then asked to choose whether they would prefer resuscitation or comfort care. After completing the survey vignette, participants were directed to a questionnaire designed to test the secondary hypothesis and to explore possible factors associated with treatment decisions. A total of 146 subjects received prognostic information framed as survival data and 146 subjects received prognostic information framed as mortality data. Overall, 24% of the sample population chose comfort care and 76% chose resuscitation. A strong trend was detected toward a framing effect on treatment preference; respondents for whom prognosis was framed as survival data were more likely to elect resuscitation. This framing effect was significant in a multivariate analysis controlling for religiousness, parental status, and beliefs regarding the sanctity of life. Of these covariates, only religiousness modified susceptibility to framing; participants who were not highly religious were significantly more likely to be influenced to opt for resuscitation by the positive frame than were participants who were highly religious. Framing bias may compromise efforts to approach prenatal counseling in a

  6. A study of the effects of penetration framing on steel containment buckling capacity

    International Nuclear Information System (INIS)

    Baker, W.E.; Butler, T.A.

    1987-05-01

    Polycarbonate cylinders modeling steel containment structures were tested to study the effects of different framing designs around large penetrations on the static buckling capacity of containments. Two of the four models had equipment hatch penetrations and two had personnel airlock penetrations. Both types of models were tested with axial and shear loads as framing was incrementally added. Results indicate that, for the models constructed of polycarbonate, buckling is influenced minimally with added framing. Numerical results support the experimental results. Extrapolation of the results to containment constructed under field conditions with prototypic steel materials is discussed and further testing is recommended

  7. Compactly supported frames for decomposition spaces

    DEFF Research Database (Denmark)

    Nielsen, Morten; Rasmussen, Kenneth Niemann

    2012-01-01

    In this article we study a construction of compactly supported frame expansions for decomposition spaces of Triebel-Lizorkin type and for the associated modulation spaces. This is done by showing that finite linear combinations of shifts and dilates of a single function with sufficient decay in b...

  8. THE FRAMING OF RARE DISEASES IN SPANISH PRESS

    Directory of Open Access Journals (Sweden)

    Sebastián Sánchez Castillo

    2014-06-01

    Full Text Available The news frame analysis has become a basic tool to understand the cognitive structures that construct social reality in its many facets. The objective of this research is to reveal the basic frames and generic frames that define the treatment of rare diseases in the Spanish press. The content analysis of 216 news items about rare diseases published in El País, El Mundo and ABC from August 2010 to September 2012 has been determined to a large extent the problem is presented as a complex social reality rather than how a disease more. Human interest based on personalization of information is the most important generic framing. These results may contribute to greater social visibility of the Rare Diseases.

  9. Construction and calibration of a low cost and fully automated vibrating sample magnetometer

    International Nuclear Information System (INIS)

    El-Alaily, T.M.; El-Nimr, M.K.; Saafan, S.A.; Kamel, M.M.; Meaz, T.M.; Assar, S.T.

    2015-01-01

    A low cost vibrating sample magnetometer (VSM) has been constructed by using an electromagnet and an audio loud speaker; where both are controlled by a data acquisition device. The constructed VSM records the magnetic hysteresis loop up to 8.3 KG at room temperature. The apparatus has been calibrated and tested by using magnetic hysteresis data of some ferrite samples measured by two scientifically calibrated magnetometers; model (Lake Shore 7410) and model (LDJ Electronics Inc. Troy, MI). Our VSM lab-built new design proved success and reliability. - Highlights: • A low cost automated vibrating sample magnetometer VSM has been constructed. • The VSM records the magnetic hysteresis loop up to 8.3 KG at room temperature. • The VSM has been calibrated and tested by using some measured ferrite samples. • Our VSM lab-built new design proved success and reliability

  10. Construction and calibration of a low cost and fully automated vibrating sample magnetometer

    Energy Technology Data Exchange (ETDEWEB)

    El-Alaily, T.M., E-mail: toson_alaily@yahoo.com [Physics Department, Faculty of Science, Tanta University, Tanta (Egypt); El-Nimr, M.K.; Saafan, S.A.; Kamel, M.M.; Meaz, T.M. [Physics Department, Faculty of Science, Tanta University, Tanta (Egypt); Assar, S.T. [Engineering Physics and Mathematics Department, Faculty of Engineering, Tanta University, Tanta (Egypt)

    2015-07-15

    A low cost vibrating sample magnetometer (VSM) has been constructed by using an electromagnet and an audio loud speaker; where both are controlled by a data acquisition device. The constructed VSM records the magnetic hysteresis loop up to 8.3 KG at room temperature. The apparatus has been calibrated and tested by using magnetic hysteresis data of some ferrite samples measured by two scientifically calibrated magnetometers; model (Lake Shore 7410) and model (LDJ Electronics Inc. Troy, MI). Our VSM lab-built new design proved success and reliability. - Highlights: • A low cost automated vibrating sample magnetometer VSM has been constructed. • The VSM records the magnetic hysteresis loop up to 8.3 KG at room temperature. • The VSM has been calibrated and tested by using some measured ferrite samples. • Our VSM lab-built new design proved success and reliability.

  11. STRENGTH ANALYSIS OF THE FRAME OF A TRAILER

    Directory of Open Access Journals (Sweden)

    Silvia MEDVECKÁ-BEŇOVÁ

    2017-09-01

    Full Text Available A trailer for carrying a small boat or water scooters was designed for a private sector company. It was a category O1 non-braked trailer with a gross weight up to 750 kg and a height-adjustable traction device. The frame must be designed and installed in such a way that, during its proposed lifetime, it will withstand all the loads and influences that may occur during construction and operation with an appropriate level of reliability. The designed frame of the trailer is a welded galvanized structure. The article is devoted to the problems related to the stress analysis of a trailer frame.

  12. Framing of Issues Across Actors: Exploring Competing Discourses in Digital Arenas

    DEFF Research Database (Denmark)

    Ravazzani, Silvia; Maier, Carmen Daniela

    2017-01-01

    in Hawaii from alternative perspectives. Findings – On each website, frame articulation attempts to connect the event to specific concerns, values and beliefs in order to construct alternative versions of reality which can possibly fit with those of supporters. Simultaneously, this is reinforced by frame...... amplification concretized in selected discursive and interactive strategies that highlight or downplay the issue from particular perspectives. Originality/value – The study offers a deep insight into the complexity and dynamic nature of framing, in particular into how framing can vary and compete across actors...

  13. Dispositional optimism, self-framing and medical decision-making.

    Science.gov (United States)

    Zhao, Xu; Huang, Chunlei; Li, Xuesong; Zhao, Xin; Peng, Jiaxi

    2015-03-01

    Self-framing is an important but underinvestigated area in risk communication and behavioural decision-making, especially in medical settings. The present study aimed to investigate the relationship among dispositional optimism, self-frame and decision-making. Participants (N = 500) responded to the Life Orientation Test-Revised and self-framing test of medical decision-making problem. The participants whose scores were higher than the middle value were regarded as highly optimistic individuals. The rest were regarded as low optimistic individuals. The results showed that compared to the high dispositional optimism group, participants from the low dispositional optimism group showed a greater tendency to use negative vocabulary to construct their self-frame, and tended to choose the radiation therapy with high treatment survival rate, but low 5-year survival rate. Based on the current findings, it can be concluded that self-framing effect still exists in medical situation and individual differences in dispositional optimism can influence the processing of information in a framed decision task, as well as risky decision-making. © 2014 International Union of Psychological Science.

  14. Dissecting the risky-choice framing effect

    Directory of Open Access Journals (Sweden)

    Ellen Peters

    2008-08-01

    Full Text Available Using five variants of the Asian Disease Problem, we dissected the risky-choice framing effect by requiring each participant to provide preference ratings for the full decision problem and also to provide attractiveness ratings for each of the component parts, i.e., the sure-thing option and the risky option. Consistent with previous research, more risky choices were made by respondents receiving negatively framed versions of the decision problems than by those receiving positively framed versions. However, different processes were evident for those scoring high and low on numeracy. Whereas the choices of the less numerate showed a large effect of frame above and beyond any influence of their evaluations of the separate options, the choices of the highly numerate were almost completely accounted for by their attractiveness ratings of the separate options. These results are consistent with an increased tendency of the highly numerate to integrate complex numeric information in the construction of their preferences and a tendency for the less numerate to respond more superficially to non-numeric sources of information.

  15. No stories without angles: Exploring the origin of cultural frames by reconstructing news stories

    NARCIS (Netherlands)

    Boesman, J.L.J.; d'Haenens, L.; Van Gorp, B.

    2014-01-01

    his paper investigates the framing practices of Flemish newspaper journalists, focusing on the production side of framing. In the selection and construction of events into news stories, the use of frames is seen as an inevitable journalistic practice to translate those events to the audience. This

  16. Framing and visual type: Effect on future Zika vaccine uptake intent.

    Science.gov (United States)

    Guidry, Jeanine P D; Carlyle, Kellie E; LaRose, Jessica G; Perrin, Paul; Ryan, Mark; Messner, Marcus; Adams, Jay

    2018-02-05

    The Zika virus is associated with the birth defect microcephaly, and while a vaccine was not available in early- 2017, several were under development. This study's purpose was to identify effective communication strategies to promote uptake of a new vaccine, particularly among women of reproductive age. In order to study the effects of Zika message framing (gain vs . loss) and visual type (photo vs . infographic) on future Zika vaccine uptake intent, a 2×2 between-subjects experiment was performed via an online survey in 2017 among 339 U.S. women of reproductive age (18-49 years). Participants were exposed to one of four messages, all resembling Instagram posts: gain-framed vs. loss-framed infographic, and gain-framed vs . loss-framed photo. These messages were followed by questions about Zika vaccine uptake intent as well as intermediate psychosocial variables that could lead to intent. There was no interaction between framing and visual type (P=0.116), and there was no effect for framing (P=0.185) or visual type (P=0.724) on future Zika vaccine uptake intent, which is likely indicative of insufficient dosage of the intervention. However, when focusing on intermediate psychosocial constructs that are known to influence behavior and intent, gain-framed messages were more effective in increasing subjective norms (P=0.005) as related to a future Zika vaccine, as well as perceived benefits (P=0.016) and self-efficacy (P=0.032). Gain-framed messages seem to be more effective than loss-framed messages to increase several constructs that could, in turn, affect future Zika vaccine uptake intent. This is a novel finding since, traditionally, loss-framed messages are considered more beneficial in promoting vaccine-related health behaviors.

  17. Four-frame gated optical imager with 120-ps resolution

    International Nuclear Information System (INIS)

    Young, P.E.; Hares, J.D.; Kilkenny, J.D.; Phillion, D.W.; Campbell, E.M.

    1988-04-01

    In this paper we describe the operation and applications of a framing camera capable of four separate two-dimensional images with each frame having a 120-ps gate width. Fast gating of a single frame is accomplished by using a wafer image intensifier tube in which the cathode is capacitively coupled to an external electrode placed outside of the photocathode of the tube. This electrode is then pulsed relative to the microchannel plate by a narrow (120 ps), high-voltage pulse. Multiple frames are obtained by using multiple gated tubes which share a single bias supply and pulser with relative gate times selected by the cable lengths between the tubes and the pulser. A beamsplitter system has been constructed which produces a separate image for each tube from a single scene. Applications of the framing camera to inertial confinement fusion experiments are discussed

  18. High Performance Commercial Fenestration Framing Systems

    Energy Technology Data Exchange (ETDEWEB)

    Mike Manteghi; Sneh Kumar; Joshua Early; Bhaskar Adusumalli

    2010-01-31

    A major objective of the U.S. Department of Energy is to have a zero energy commercial building by the year 2025. Windows have a major influence on the energy performance of the building envelope as they control over 55% of building energy load, and represent one important area where technologies can be developed to save energy. Aluminum framing systems are used in over 80% of commercial fenestration products (i.e. windows, curtain walls, store fronts, etc.). Aluminum framing systems are often required in commercial buildings because of their inherent good structural properties and long service life, which is required from commercial and architectural frames. At the same time, they are lightweight and durable, requiring very little maintenance, and offer design flexibility. An additional benefit of aluminum framing systems is their relatively low cost and easy manufacturability. Aluminum, being an easily recyclable material, also offers sustainable features. However, from energy efficiency point of view, aluminum frames have lower thermal performance due to the very high thermal conductivity of aluminum. Fenestration systems constructed of aluminum alloys therefore have lower performance in terms of being effective barrier to energy transfer (heat loss or gain). Despite the lower energy performance, aluminum is the choice material for commercial framing systems and dominates the commercial/architectural fenestration market because of the reasons mentioned above. In addition, there is no other cost effective and energy efficient replacement material available to take place of aluminum in the commercial/architectural market. Hence it is imperative to improve the performance of aluminum framing system to improve the energy performance of commercial fenestration system and in turn reduce the energy consumption of commercial building and achieve zero energy building by 2025. The objective of this project was to develop high performance, energy efficient commercial

  19. TYPES OF STEEL AND CONCRETE COMPOSITE CABLE SPACE FRAMES

    Directory of Open Access Journals (Sweden)

    G. M. Gasii

    2016-12-01

    Full Text Available Purpose. Modern terms of the construction generate the need to find new structures, including roof systems that would meet modern requirements. An important aspect in finding constructive solutions for new structures is the use of reliable and advanced materials. Considering this, the decision to develop the new space structures to a wide implementation in practice of domestic and foreign construction are relevant and perspective direction of building structures development. Methodology. Given the results of previously conducted theoretical research of existing types of space roof structures find promising areas of improvement or creation of new structures that should be devoid of weaknesses and imperfections of analogs and they should have an economic effect through rational use of materials. Findings. Types of steel and concrete composite cable space frames and structural features of its elements are developed and considered. The steel and concrete composite cable space frame is a completely new kind of space structure system that has the original structural concept and it was designed to cover large-span industrial and public buildings. The basic elements of that structure system are modular element of the bottom chord and space steel and concrete composite module that consists of tubular rods and reinforced concrete slab. All modular elements are made in the factory. With bottom chord modular elements and space steel and concrete composite modules can be assembled three types of longitudinal elements. It is the beam element, arched element and hanging element. Also with the modules can be assembled various structure system and their combinations. Number of space steel and concrete composite modules and bottom chord modular elements, which is needed to collect steel and concrete composite cable space frames, is determined by calculation and optimal designing. Recommended dimensions of the modular elements of the steel and concrete composite

  20. Framing Big Data: The discursive construction of a radio cell query in Germany

    Directory of Open Access Journals (Sweden)

    Christian Pentzold

    2017-11-01

    Full Text Available The article examines the construction of “Big Data” in media discourse. Rather than asking what Big Data really is or is not, it deals with the discursive work that goes into making Big Data a socially relevant phenomenon and problem in the first place. It starts from the idea that in modern societies the public understanding of technology is largely driven by a media-based discourse, which is a key arena for circulating collectively shared meanings. This largely ignored dimension invites us to appreciate what matters to journalists and the wider public when discussing the collection and use of data. To this end, our study looks at how Big Data is framed in terms of the governmental use of large datasets as a contentious area of data application. It reconstructs the perspectives surrounding the so-called “Handygate” affair in Germany based on broadcast news and social media conversations. In this incident, state authorities collected and analyzed mobile phone data through a radio cell query during events to commemorate the Dresden bombing in February 2011. We employ a qualitative discourse analysis that allows us to reconstruct the conceptualizations of Big Data as a proper instrument for criminal prosecution or an unjustified infringement of constitutional rights.

  1. Evaluation of a segment-based LANDSAT full-frame approach to corp area estimation

    Science.gov (United States)

    Bauer, M. E. (Principal Investigator); Hixson, M. M.; Davis, S. M.

    1981-01-01

    As the registration of LANDSAT full frames enters the realm of current technology, sampling methods should be examined which utilize other than the segment data used for LACIE. The effect of separating the functions of sampling for training and sampling for area estimation. The frame selected for analysis was acquired over north central Iowa on August 9, 1978. A stratification of he full-frame was defined. Training data came from segments within the frame. Two classification and estimation procedures were compared: statistics developed on one segment were used to classify that segment, and pooled statistics from the segments were used to classify a systematic sample of pixels. Comparisons to USDA/ESCS estimates illustrate that the full-frame sampling approach can provide accurate and precise area estimates.

  2. All framing effects are not created equal: Low convergent validity between two classic measurements of framing.

    Science.gov (United States)

    Zhen, Shanshan; Yu, Rongjun

    2016-07-20

    Human risk-taking attitudes can be influenced by two logically equivalent but descriptively different frames, termed the framing effect. The classic hypothetical vignette-based task (Asian disease problem) and a recently developed reward-based gambling task have been widely used to assess individual differences in the framing effect. Previous studies treat framing bias as a stable trait that has genetic basis. However, these two paradigms differ in terms of task domain (loss vs. gain) and task context (vignette-based vs. reward-based) and the convergent validity of these measurements remains unknown. Here, we developed a vignette-based task and a gambling task in both gain and loss domains and tested correlations of the framing effect among these tasks in 159 young adults. Our results revealed no significant correlation between the vignette-based task in the loss domain and the gambling task in the gain domain, indicating low convergent validity. The current findings raise the question of how to measure the framing effect precisely, especially in individual difference studies using large samples and expensive neuroscience methods. Our results suggest that the framing effect is influenced by both task domain and task context and future research should be cautious about the operationalization of the framing effect.

  3. Titan : A new facility for ultraclean sampling of trace elements and isotopes in the deep oceans in the international Geotraces program

    NARCIS (Netherlands)

    de Baar, H.J.W.; Timmermans, K.R; Laan, P.; De Porto, H.H.; Ober, S.; Blom, J.J.; Bakker, M.C.; Schilling, J; Sarthou, G.; Smit, M. G.; Klunder, M

    2008-01-01

    Towards more rapid ultraclean sampling of deep ocean waters for trace elements, a novel rectangular frame was constructed of titanium, holding two rows of 12 samplers, as well as various sensors. The frame is deployed to deep ocean waters by an 8000 m length Kevlar wire with internal power and

  4. Parallel-propagated frame along null geodesics in higher-dimensional black hole spacetimes

    International Nuclear Information System (INIS)

    Kubiznak, David; Frolov, Valeri P.; Connell, Patrick; Krtous, Pavel

    2009-01-01

    In [arXiv:0803.3259] the equations describing the parallel transport of orthonormal frames along timelike (spacelike) geodesics in a spacetime admitting a nondegenerate principal conformal Killing-Yano 2-form h were solved. The construction employed is based on studying the Darboux subspaces of the 2-form F obtained as a projection of h along the geodesic trajectory. In this paper we demonstrate that, although slightly modified, a similar construction is possible also in the case of null geodesics. In particular, we explicitly construct the parallel-transported frames along null geodesics in D=4, 5, 6 Kerr-NUT-(A)dS spacetimes. We further discuss the parallel transport along principal null directions in these spacetimes. Such directions coincide with the eigenvectors of the principal conformal Killing-Yano tensor. Finally, we show how to obtain a parallel-transported frame along null geodesics in the background of the 4D Plebanski-Demianski metric which admits only a conformal generalization of the Killing-Yano tensor.

  5. Defining an absolute reference frame for 'clumped' isotope studies of CO 2

    Science.gov (United States)

    Dennis, Kate J.; Affek, Hagit P.; Passey, Benjamin H.; Schrag, Daniel P.; Eiler, John M.

    2011-11-01

    We present a revised approach for standardizing and reporting analyses of multiply substituted isotopologues of CO 2 (i.e., 'clumped' isotopic species, especially the mass-47 isotopologues). Our approach standardizes such data to an absolute reference frame based on theoretical predictions of the abundances of multiply-substituted isotopologues in gaseous CO 2 at thermodynamic equilibrium. This reference frame is preferred over an inter-laboratory calibration of carbonates because it enables all laboratories measuring mass 47 CO 2 to use a common scale that is tied directly to theoretical predictions of clumping in CO 2, regardless of the laboratory's primary research field (carbonate thermometry or CO 2 biogeochemistry); it explicitly accounts for mass spectrometric artifacts rather than convolving (and potentially confusing) them with chemical fractionations associated with sample preparation; and it is based on a thermodynamic equilibrium that can be experimentally established in any suitably equipped laboratory using commonly available materials. By analyzing CO 2 gases that have been subjected to established laboratory procedures known to promote isotopic equilibrium (i.e., heated gases and water-equilibrated CO 2), and by reference to thermodynamic predictions of equilibrium isotopic distributions, it is possible to construct an empirical transfer function that is applicable to data with unknown clumped isotope signatures. This transfer function empirically accounts for the fragmentation and recombination reactions that occur in electron impact ionization sources and other mass spectrometric artifacts. We describe the protocol necessary to construct such a reference frame, the method for converting gases with unknown clumped isotope compositions to this reference frame, and suggest a protocol for ensuring that all reported isotopic compositions (e.g., Δ 47 values; Eiler and Schauble, 2004; Eiler, 2007) can be compared among different laboratories and

  6. Fourier-like frames on locally compact abelian groups

    DEFF Research Database (Denmark)

    Christensen, Ole; Goh, Say Song

    2015-01-01

    We consider a class of functions, defined on a locally compact abelian group by letting a class of modulation operators act on a countable collection of functions. We derive sufficient conditions for such a class of functions to form a Bessel sequence or a frame and for two such systems to be dual...... frames. Explicit constructions are obtained via various generalizations of the classical B-splines to the setting of locally compact abelian groups. (C) 2014 Elsevier Inc. All rights reserved....

  7. Some relationship between G-frames and frames

    Directory of Open Access Journals (Sweden)

    Mehdi Rashidi-Kouchi

    2015-06-01

    Full Text Available In this paper we proved that every g-Riesz basis for Hilbert space $H$ with respect to $K$ by adding a condition is a Riesz basis for Hilbert $B(K$-module $B(H,K$. This is an extension of [A. Askarizadeh,M. A. Dehghan, {em G-frames as special frames}, Turk. J. Math., 35, (2011 1-11]. Also, we derived similar results for g-orthonormal and orthogonal bases. Some relationships between dual frame, dual g-frame and exact frame and exact g-frame are presented too.

  8. Putting Safety in the Frame: Nurses' Sensemaking at Work.

    Science.gov (United States)

    O'Keeffe, Valerie Jean; Thompson, Kirrilly Rebecca; Tuckey, Michelle Rae; Blewett, Verna Lesley

    2015-01-01

    Current patient safety policy focuses nursing on patient care goals, often overriding nurses' safety. Without understanding how nurses construct work health and safety (WHS), patient and nurse safety cannot be reconciled. Using ethnography, we examine social contexts of safety, studying 72 nurses across five Australian hospitals making decisions during patient encounters. In enacting safe practice, nurses used "frames" built from their contextual experiences to guide their behavior. Frames are produced by nurses, and they structure how nurses make sense of their work. Using thematic analysis, we identify four frames that inform nurses' decisions about WHS: (a) communicating builds knowledge, (b) experiencing situations guides decisions, (c) adapting procedures streamlines work, and (d) team working promotes safe working. Nurses' frames question current policy and practice by challenging how nurses' safety is positioned relative to patient safety. Recognizing these frames can assist the design and implementation of effective WHS management.

  9. Framing the implementation of HRM innovation HR professionals vs line managers in a construction company

    NARCIS (Netherlands)

    Bondarouk, Tatiana; Looise, Jan C.; Lempsink, Bart

    2009-01-01

    Purpose – The purpose of this paper is to present the concept of human resource management (HRM) frames, to identify frame domains, and to explore their role in implementing HRM innovation. HRM innovation implementation is considered through the theoretical lens of social cognitive theory, and

  10. Design method for strut-beam connection in hinged frames

    OpenAIRE

    Cardenal Basté, Joan

    2011-01-01

    Glulam is almost exclusively the chosen material of timber frame structures. Of those, three-hinged (three-pin) portal frames are incomparably the most common type. Being both statically determinate and stable against horizontal forces in its own plane o er both practical (basic constructive details) and economical bene ts. The design of the haunch allows for various solutions: it can be curved with continuous laminates, nger jointed, jointed with steel dowels and slotted-i...

  11. An Engineer's Physics Lab -- using a Large Force Frame

    Science.gov (United States)

    Heid, Christy; Rampolla, Donald

    2009-03-01

    We have constructed very economical, easy to assemble force frames that are used by students in our general physics laboratory at Chatham University. The force frame is used at the beginning of the semester to study vector properties of forces. The force frame can be used as a horizontal or vertical force table. Angles of forces are measured using a large movable (rotation and translation) Cartesian coordinate board attached to the frame with large binder clips. The force frame is a versatile device which is used for a number of other experiments, including beam bending and torsion, mechanical resonance, projectile trajectories, torque, mechanical equilibrium, an isolated non-magnetic support for magnetic field experiments, easily adjustable support for inclined plane experiments, support for traveling wave experiments with heavy rope, and support for large scale fluid flow experiments. One advantage to a wood frame is that things can be easily stapled, nailed, screwed or glued just about anywhere on the frame, and damaged frame members can be replaced easily. As one of the few remaining women's undergraduate institutions, we have found the use of these frames to provide an additional advantage in helping women overcome their fear of simple power tools and assembly of mechanical parts as they become comfortable with these through working with the force frames throughout the semester. We intend to describe and model these applications during the session.

  12. The Role of Frame Force in Quantum Detection

    National Research Council Canada - National Science Library

    Benedetto, John J; Kebo, Andrew

    2007-01-01

    .... In this paper, we focus on a quantum detection problem, where the goal is to construct a tight frame that minimizes an error term, which in quantum physics has the interpretation of the probability of a detection error...

  13. Reuse Tools to Support ADA Instantiation Construction

    Science.gov (United States)

    1990-06-01

    specification and body with embedded task shell instantiations, as well as an inter-task coordination procedure which controls task activation, execution, and...Tools to Support Ada Instantiation Construction 3 - Generalized Construction Approaches Page 39 4Automatic Programming Programmer’s Apprentice ~ASLs...which is the root of a frame hierarchy. The specification frame controls the hierarchy’s composition of the program and stores all its custom

  14. Disentangling approaches to framing in conflict and negotiation research: a meta-paradigmatic perspective

    NARCIS (Netherlands)

    Dewulf, A.; Gray, B.; Putnam, L.; Lewicki, R.; Aarts, M.N.C.; Bouwen, R.; Woerkum, van C.M.J.

    2009-01-01

    Divergent theoretical approaches to the construct of framing have resulted in conceptual confusion in conflict research.We disentangle these approaches by analyzing their assumptions about 1) the nature of frames ¿ that is, cognitive representations or interactional coconstructions, and 2) what is

  15. Media Construction of Gender: Framing Analysis of Rape Cases in the Mass Media

    Directory of Open Access Journals (Sweden)

    Ali Imron

    2013-02-01

    Full Text Available Construction of the printed media which tends to dramatize and blow up the reporting of rape cases has in fact discredited the rape victim, resulting in gender bias. This is due to the fact that media present the news content concerning on the victim and the perpetrator in imbalanced reporting, in that the victims are scrutinized from diverse facets. This paper analyze the coverage of printed media in rape cases by means of framing analysis. The result shows that printed media coverage generally goes beyond the rape case itself as the victim’s identity and images of the incident are also revealed. The using of visual image (victim’s image is probably aimed to present an overview on the fact or the truth from the media viewpoint. This presentation, however, obscures the differences between factual and fictional reality and this might lead to different interpretation on the readers’ side. Furthermore, inappropriate reporting might become the society’s reference concerning on the modus operandi, in that the society learn or imitate the aspects they once did not know of. Visual image will create a second rape by the media toward the victim, in addition to the stereotyping developed in public, which often brings out psychological impact to the victim and the family. This is called the third rape.

  16. Constructing pairs of dual bandlimited framelets with desired time localization

    DEFF Research Database (Denmark)

    Lemvig, Jakob

    2009-01-01

    combination of dilations of ψ with explicitly given coefficients. The result allows a simple construction procedure for pairs of dual wavelet frames whose generators have compact support in the Fourier domain and desired time localization. The construction is based on characteriszing equations for dual......For sufficiently small translation parameters, we prove that any bandlimited function ψ, for which the dilations of its Fourier transform form a partition of unity, generates a wavelet frame with a dual frame also having the wavelet structure. This dual frame is generated by a finite linear...

  17. Constructing pairs of dual bandlimited framelets with desired time localization

    DEFF Research Database (Denmark)

    Lemvig, Jakob

    combination of dilations of ψ with explicitly given coefficients. The result allows a simple construction procedure for pairs of dual wavelet frames whose generators have compact support in the Fourier domain and desired time localization. The construction is based on characteriszing equations for dual......For sufficiently small translation parameters, we prove that any bandlimited function ψ, for which the dilations of its Fourier transform form a partition of unity, generates a wavelet frame with a dual frame also having the wavelet structure. This dual frame is generated by a finite linear...

  18. A comparison of results for samples collected with bailers constructed of different materials

    International Nuclear Information System (INIS)

    Thomey, N.; Ogle, R.; Jackson, J.

    1992-01-01

    A bailer is one of the most common sampling devices used to collect ground water samples. Bailers constructed from various materials are available; teflon, polyvinyl chloride (PVC), polyethylene, and stainless steel are all commonly used. It is widely recognized that sample results can be affected by the material from which the bailer is constructed. Teflon and stainless steel are usually recommended based upon their inert properties. The cost of these bailers is significantly higher than other types. For the purposes of petroleum storage tank investigations, sampling devices that would not compromise sample quality but be more economical than teflon or stainless steel would be especially desirable. Water samples were collected using the different types of bailers; teflon, stainless steel, PVC, and polyethylene. Split samples were analyzed for benzene, toluene, ethylbenzene, total xylenes, and Total Petroleum Hydrocarbons. The analytical results were compared to determine if differences were due to normal analytical variances or due to interaction of the sample with the sampling device. No difference was noted in the results which were obtained

  19. ORF-selector ESPRIT: a second generation library screen for soluble protein expression employing precise open reading frame selection.

    Science.gov (United States)

    An, Yingfeng; Yumerefendi, Hayretin; Mas, Philippe J; Chesneau, Alban; Hart, Darren J

    2011-08-01

    Here we present ORF-selector ESPRIT, a 9-fold enhanced version of our technology for screening incremental truncation libraries to identify soluble high yielding constructs of challenging proteins. Gene fragments are truncated at both termini to access internal domains and the resulting reading frame problem is addressed by an unbiased, intein-based open reading frame selection yielding only in-frame DNA inserts. This enriched library is then subcloned into a standard high-level expression plasmid where tens of thousands of constructs can be assayed in a two-step process using colony- and liquid-handling robots to isolate rare highly expressing clones useful for production of multi milligram quantities of purifiable proteins. The p85α protein was used to benchmark the system resulting in isolation of all known domains, either alone or in tandem. The human kinase IKK1 was then screened resulting in purification of a predicted internal domain. This strategy provides an integrated, facile route to produce soluble proteins from challenging and poorly understood target genes at quantities compatible with structural biology, screening applications and immunisation studies. The high genetic diversity that can be sampled opens the way to study more diverse systems including multisubunit complexes. Copyright © 2011 Elsevier Inc. All rights reserved.

  20. Adaptive tight frame based medical image reconstruction: a proof-of-concept study for computed tomography

    International Nuclear Information System (INIS)

    Zhou, Weifeng; Cai, Jian-Feng; Gao, Hao

    2013-01-01

    A popular approach for medical image reconstruction has been through the sparsity regularization, assuming the targeted image can be well approximated by sparse coefficients under some properly designed system. The wavelet tight frame is such a widely used system due to its capability for sparsely approximating piecewise-smooth functions, such as medical images. However, using a fixed system may not always be optimal for reconstructing a variety of diversified images. Recently, the method based on the adaptive over-complete dictionary that is specific to structures of the targeted images has demonstrated its superiority for image processing. This work is to develop the adaptive wavelet tight frame method image reconstruction. The proposed scheme first constructs the adaptive wavelet tight frame that is task specific, and then reconstructs the image of interest by solving an l 1 -regularized minimization problem using the constructed adaptive tight frame system. The proof-of-concept study is performed for computed tomography (CT), and the simulation results suggest that the adaptive tight frame method improves the reconstructed CT image quality from the traditional tight frame method. (paper)

  1. Creating a sampling frame for population-based veteran research: Representativeness and overlap of VA and Department of Defense databases

    OpenAIRE

    Donna L. Washington, MD, MPH; Su Sun, MPH; Mark Canning, BA

    2010-01-01

    Most veteran research is conducted in Department of Veterans Affairs (VA) healthcare settings, although most veterans obtain healthcare outside the VA. Our objective was to determine the adequacy and relative contributions of Veterans Health Administration (VHA), Veterans Benefits Administration (VBA), and Department of Defense (DOD) administrative databases for representing the U.S. veteran population, using as an example the creation of a sampling frame for the National Survey of Women Vete...

  2. Constructing Reality: Print Media's Framing of the Women's Movement, 1966 to 1986.

    Science.gov (United States)

    Ashley, Laura; Olson, Beth

    1998-01-01

    Contributes to scholarship of journalism history, social movements, and feminism by analyzing framing techniques found in coverage of the women's movement. Finds widespread delegitimation of feminists, including reporting aspects of the women's appearance, using quotation marks around such words as "liberation," and emphasizing…

  3. Construction and calibration of a low cost and fully automated vibrating sample magnetometer

    Science.gov (United States)

    El-Alaily, T. M.; El-Nimr, M. K.; Saafan, S. A.; Kamel, M. M.; Meaz, T. M.; Assar, S. T.

    2015-07-01

    A low cost vibrating sample magnetometer (VSM) has been constructed by using an electromagnet and an audio loud speaker; where both are controlled by a data acquisition device. The constructed VSM records the magnetic hysteresis loop up to 8.3 KG at room temperature. The apparatus has been calibrated and tested by using magnetic hysteresis data of some ferrite samples measured by two scientifically calibrated magnetometers; model (Lake Shore 7410) and model (LDJ Electronics Inc. Troy, MI). Our VSM lab-built new design proved success and reliability.

  4. A sampling approach to constructing Lyapunov functions for nonlinear continuous–time systems

    NARCIS (Netherlands)

    Bobiti, R.V.; Lazar, M.

    2016-01-01

    The problem of constructing a Lyapunov function for continuous-time nonlinear dynamical systems is tackled in this paper via a sampling-based approach. The main idea of the sampling-based method is to verify a Lyapunov-type inequality for a finite number of points (known state vectors) in the

  5. Attribute Framing and Goal Framing Effects in Health Decisions.

    Science.gov (United States)

    Krishnamurthy, Parthasarathy; Carter, Patrick; Blair, Edward

    2001-07-01

    Levin, Schneider, and Gaeth (LSG, 1998) have distinguished among three types of framing-risky choice, attribute, and goal framing-to reconcile conflicting findings in the literature. In the research reported here, we focus on attribute and goal framing. LSG propose that positive frames should be more effective than negative frames in the context of attribute framing, and negative frames should be more effective than positive frames in the context of goal framing. We test this framework by manipulating frame valence (positive vs negative) and frame type (attribute vs goal) in a unified context with common procedures. We also argue that the nature of effects in a goal-framing context may depend on the extent to which the research topic has "intrinsic self-relevance" to the population. In the context of medical decision making, we operationalize low intrinsic self-relevance by using student subjects and high intrinsic self-relevance by using patients. As expected, we find complete support for the LSG framework under low intrinsic self-relevance and modified support for the LSG framework under high intrinsic self-relevance. Overall, our research appears to confirm and extend the LSG framework. Copyright 2001 Academic Press.

  6. Parametric Evaluation of Racking Performance of Platform Timber Framed Walls

    OpenAIRE

    Dhonju, R..; D’Amico, B..; Kermani, A..; Porteous, J..; Zhang, B..

    2017-01-01

    This paper provides a quantitative assessment of the racking performance of partially anchored timber framed walls, based on experimental tests. A total of 17 timber framed wall specimens, constructed from a combination of materials under different load configurations, were tested. The experimental study was designed toexamine the influence of a range of geometrical parameters, such as fastener size and spacings, wall length, arrangement of studs and horizontal members, as well as the effect ...

  7. Solid-state framing camera with multiple time frames

    Energy Technology Data Exchange (ETDEWEB)

    Baker, K. L.; Stewart, R. E.; Steele, P. T.; Vernon, S. P.; Hsing, W. W.; Remington, B. A. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States)

    2013-10-07

    A high speed solid-state framing camera has been developed which can operate over a wide range of photon energies. This camera measures the two-dimensional spatial profile of the flux incident on a cadmium selenide semiconductor at multiple times. This multi-frame camera has been tested at 3.1 eV and 4.5 keV. The framing camera currently records two frames with a temporal separation between the frames of 5 ps but this separation can be varied between hundreds of femtoseconds up to nanoseconds and the number of frames can be increased by angularly multiplexing the probe beam onto the cadmium selenide semiconductor.

  8. Seismic Rehabilitation of RC Frames by Using Steel Panels

    Science.gov (United States)

    Mowrtage, Waiel

    2008-07-01

    Every major earthquake in Turkey causes a large number of building suffer moderate damage due to poor construction. If a proper and fast retrofit is not applied, the aftershocks, which may sometimes come days or weeks after the main shock, can push a moderately damaged building into a major damage or even total collapse. This paper presents a practical retrofit method for moderately damaged buildings, which increases the seismic performance of the structural system by reducing the displacement demand. Fabricated steel panels are used for the retrofit. They are light-weight, easy to handle, and can be constructed very quickly. Moreover, they are cheap, and do not need formwork or skilled workers. They can be designed to compensate for the stiffness and strength degradation, and to fit easily inside a moderately damaged reinforced concrete frame. To test the concept, a half-scale, single-story 3D reinforced concrete frame specimen was constructed at the shake-table laboratories of the Kandilli Observatory and Earthquake Research Institute of Bogazici University, and subjected to recorded real earthquake base accelerations. The amplitudes of base accelerations were increased until a moderate damage level is reached. Then, the damaged RC frames was retrofitted by means of steel panels and tested under the same earthquake. The seismic performance of the specimen before and after the retrofit was evaluated using FEMA356 standards, and the results were compared in terms of stiffness, strength, and deformability. The results have confirmed effectiveness of the proposed retrofit scheme.

  9. Seismic Rehabilitation of RC Frames by Using Steel Panels

    International Nuclear Information System (INIS)

    Mowrtage, Waiel

    2008-01-01

    Every major earthquake in Turkey causes a large number of building suffer moderate damage due to poor construction. If a proper and fast retrofit is not applied, the aftershocks, which may sometimes come days or weeks after the main shock, can push a moderately damaged building into a major damage or even total collapse. This paper presents a practical retrofit method for moderately damaged buildings, which increases the seismic performance of the structural system by reducing the displacement demand. Fabricated steel panels are used for the retrofit. They are light-weight, easy to handle, and can be constructed very quickly. Moreover, they are cheap, and do not need formwork or skilled workers. They can be designed to compensate for the stiffness and strength degradation, and to fit easily inside a moderately damaged reinforced concrete frame.To test the concept, a half-scale, single-story 3D reinforced concrete frame specimen was constructed at the shake-table laboratories of the Kandilli Observatory and Earthquake Research Institute of Bogazici University, and subjected to recorded real earthquake base accelerations. The amplitudes of base accelerations were increased until a moderate damage level is reached. Then, the damaged RC frames was retrofitted by means of steel panels and tested under the same earthquake. The seismic performance of the specimen before and after the retrofit was evaluated using FEMA356 standards, and the results were compared in terms of stiffness, strength, and deformability. The results have confirmed effectiveness of the proposed retrofit scheme

  10. Nonmonotonic belief state frames and reasoning frames

    NARCIS (Netherlands)

    Engelfriet, J.; Herre, H.; Treur, J.

    1995-01-01

    In this paper five levels of specification of nonmonotonic reasoning are distinguished. The notions of semantical frame, belief state frame and reasoning frame are introduced and used as a semantical basis for the first three levels. Moreover, the semantical connections between the levels are

  11. Using Stories to Reframe the Social Construction of Reality: A Trio of Activities

    Science.gov (United States)

    Morgan, Sandra; Dennehy, Robert F.

    2004-01-01

    This article first presents the theoretical grounding for both storytelling and the social construction of reality. A sequence of classroom-tested tools for combining stories with reality construction is then described. Two tools for framing reality are offered: One is an actual frame that students take out of the classroom to frame a scene in…

  12. Life Comparative Analysis of Energy Consumption and CO2 Emissions of Different Building Structural Frame Types

    Science.gov (United States)

    Kim, Sangyong; Moon, Joon-Ho; Shin, Yoonseok; Kim, Gwang-Hee; Seo, Deok-Seok

    2013-01-01

    The objective of this research is to quantitatively measure and compare the environmental load and construction cost of different structural frame types. Construction cost also accounts for the costs of CO2 emissions of input materials. The choice of structural frame type is a major consideration in construction, as this element represents about 33% of total building construction costs. In this research, four constructed buildings were analyzed, with these having either reinforced concrete (RC) or steel (S) structures. An input-output framework analysis was used to measure energy consumption and CO2 emissions of input materials for each structural frame type. In addition, the CO2 emissions cost was measured using the trading price of CO2 emissions on the International Commodity Exchange. This research revealed that both energy consumption and CO2 emissions were, on average, 26% lower with the RC structure than with the S structure, and the construction costs (including the CO2 emissions cost) of the RC structure were about 9.8% lower, compared to the S structure. This research provides insights through which the construction industry will be able to respond to the carbon market, which is expected to continue to grow in the future. PMID:24227998

  13. Life Comparative Analysis of Energy Consumption and CO2 Emissions of Different Building Structural Frame Types

    Directory of Open Access Journals (Sweden)

    Sangyong Kim

    2013-01-01

    Full Text Available The objective of this research is to quantitatively measure and compare the environmental load and construction cost of different structural frame types. Construction cost also accounts for the costs of CO2 emissions of input materials. The choice of structural frame type is a major consideration in construction, as this element represents about 33% of total building construction costs. In this research, four constructed buildings were analyzed, with these having either reinforced concrete (RC or steel (S structures. An input-output framework analysis was used to measure energy consumption and CO2 emissions of input materials for each structural frame type. In addition, the CO2 emissions cost was measured using the trading price of CO2 emissions on the International Commodity Exchange. This research revealed that both energy consumption and CO2 emissions were, on average, 26% lower with the RC structure than with the S structure, and the construction costs (including the CO2 emissions cost of the RC structure were about 9.8% lower, compared to the S structure. This research provides insights through which the construction industry will be able to respond to the carbon market, which is expected to continue to grow in the future.

  14. Preliminary Theoretical Interpretation of the Tajmar Frame Dragging Effect Through the GEM Theory

    International Nuclear Information System (INIS)

    Brandenburg, John

    2009-01-01

    A preliminary theoretical explanation for the large amplitude frame dragging effect seen by Tajmar et al.(2007) is proposed. A simple theory of quantum photon fields mediating electrodynamics is derived based on concepts from QED. These are then expressed as quantum wave functions for rotating EM systems. Based on the GEM theory, it is proposed that gravitational frame dragging relies on similar photon wave functions. The constructive interference of the frame dragging fields with co-rotating EM photon fields coupled to Bose-Einstein components in matter at low temperatures results in a large frame dragging term due to a mixed gravity-EM term that is larger by a factor of approximately 10 20 than ordinary frame dragging.

  15. Framing and the health policy process: a scoping review.

    Science.gov (United States)

    Koon, Adam D; Hawkins, Benjamin; Mayhew, Susannah H

    2016-07-01

    Framing research seeks to understand the forces that shape human behaviour in the policy process. It assumes that policy is a social construct and can be cast in a variety of ways to imply multiple legitimate value considerations. Frames provide the cognitive means of making sense of the social world, but discordance among them forms the basis of policy contestation. Framing, as both theory and method, has proven to generate considerable insight into the nature of policy debates in a variety of disciplines. Despite its salience for understanding health policy debates; however, little is known about the ways frames influence the health policy process. A scoping review using the Arksey and O'Malley framework was conducted. The literature on framing in the health sector was reviewed using nine health and social science databases. Articles were included that explicitly reported theory and methods used, data source(s), at least one frame, frame sponsor and evidence of a given frame's effect on the health policy process. A total of 52 articles, from 1996 to 2014, and representing 12 countries, were identified. Much of the research came from the policy studies/political science literature (n = 17) and used a constructivist epistemology. The term 'frame' was used as a label to describe a variety of ideas, packaged as values, social problems, metaphors or arguments. Frames were characterized at various levels of abstraction ranging from general ideological orientations to specific policy positions. Most articles presented multiple frames and showed how actors advocated for them in a highly contested political process. Framing is increasingly an important, yet overlooked aspect of the policy process. Further analysis on frames, framing processes and frame conflict can help researchers and policymakers to understand opaque and highly charged policy issues, which may facilitate the resolution of protracted policy controversies. © The Author 2016. Published by Oxford

  16. Boron Diffusion in Surface-Treated Framing Lumber

    Science.gov (United States)

    Patricia K. Lebow; Stan T. Lebow; Steven A. Halverson

    2013-01-01

    The extent of boron penetration in framing lumber treated by spray applications during construction is not well quantified. This study evaluated the effect of formulation and concentration on diffusion of boron in lumber specimens that were equilibrated in conditions that produced wood moisture contents of 18 to 21 percent. One set of specimens was pressure treated...

  17. Framing perceived service quality and related constructs : A multilevel approach

    NARCIS (Netherlands)

    Roest, H.C.A.; Koelemeijer, K.

    1993-01-01

    Despite many publications on perceived service quality, the position of the construct relative to other key constructs in marketing/consumer behavior remains vague. This paper tries to bring conceptual clarity with regard to the relationships between perceived service quality, customer satisfaction/

  18. Experience of light thin-walled structures improvement in construction

    Science.gov (United States)

    Frolovskaia, A. V.; Deordiev, S. V.; Falk, A.; Klinduh, N. Y.; Terehova, I. I.

    2018-05-01

    The authors on the basis of practical experience have analyzed low-rise construction with the use of energy-saving technologies. Characteristic features of possible variants of frame construction are looked at and described. The relevance of the paper consists in the improvement of the building frame design solution based on the analysis and elimination of disadvantages taking into account consumers’ point of view.

  19. Entman Framing Analysis of Food Governance in Online Media

    Directory of Open Access Journals (Sweden)

    Diana Anggraeni

    2018-02-01

    Full Text Available The article aim is to understand how kompas.com and sindonews.com on the period of 16 October 2017 up to 21 October 2017 framing the news related to food governance in Indonesia using Entman Framing Analysis. Entman Framing is an alternative method to see media differentiation in reveal the reality. According to the researcher, the two media possess its own differentiation in interpreting those realities, so that media could be considered as reader mindset influencer. The concept and theory of the article is agenda setting, reality construct, Entman framing, news and online media. The article method is qualitative using news article as analysis unit. The result show that the two online media emphasize issue about food governance management system. But the assertion of the two news are different; kompas.com tend to build and develop the village and farmer regeneration aspect, while sindonews.com emphasized on reinforcement the management system of food governance.

  20. CONSTRUCTIVE ASPECTS INFLUENCE ON STIFFNESS OF DIAPHRAGM WALLS IN FRAME CONSTRUCTIONS WITH (LIGHT STEEL THIN –WALLED STRUCTURES

    Directory of Open Access Journals (Sweden)

    M. V. Savytskyi

    2010-10-01

    Full Text Available The dependences of influence of structural features of diaphragms of lightweight steel framing braced wall structures on their stiffness are determined. On the basis of dependences the procedure for estimation of stiffness of a diaphragm of any configuration that allows making decisions for maintenance of building stiffness is developed.

  1. Seismic performance for vertical geometric irregularity frame structures

    Science.gov (United States)

    Ismail, R.; Mahmud, N. A.; Ishak, I. S.

    2018-04-01

    This research highlights the result of vertical geometric irregularity frame structures. The aid of finite element analysis software, LUSAS was used to analyse seismic performance by focusing particularly on type of irregular frame on the differences in height floors and continued in the middle of the building. Malaysia’s building structures were affected once the earthquake took place in the neighbouring country such as Indonesia (Sumatera Island). In Malaysia, concrete is widely used in building construction and limited tension resistance to prevent it. Analysing structural behavior with horizontal and vertical static load is commonly analyses by using the Plane Frame Analysis. The case study of this research is to determine the stress and displacement in the seismic response under this type of irregular frame structures. This study is based on seven-storey building of Clinical Training Centre located in Sungai Buloh, Selayang, Selangor. Since the largest earthquake occurs in Acheh, Indonesia on December 26, 2004, the data was recorded and used in conducting this research. The result of stress and displacement using IMPlus seismic analysis in LUSAS Modeller Software under the seismic response of a formwork frame system states that the building is safe to withstand the ground and in good condition under the variation of seismic performance.

  2. Media Framing

    DEFF Research Database (Denmark)

    Pedersen, Rasmus T.

    2017-01-01

    The concept of media framing refers to the way in which the news media organize and provide meaning to a news story by emphasizing some parts of reality and disregarding other parts. These patterns of emphasis and exclusion in news coverage create frames that can have considerable effects on news...... consumers’ perceptions and attitudes regarding the given issue or event. This entry briefly elaborates on the concept of media framing, presents key types of media frames, and introduces the research on media framing effects....

  3. Framing effects over time: comparing affective and cognitive news frames

    NARCIS (Netherlands)

    Lecheler, S.; Matthes, J.

    2012-01-01

    A growing number of scholars examine the duration of framing effects. However, duration is likely to differ from frame to frame, depending on how strong a frame is. This strength is likely to be enhanced by adding emotional components to a frame. By means of an experimental survey design (n = 111),

  4. A Model of Framing in Design Teams

    Science.gov (United States)

    Zahedi, Mithra; Heaton, Lorna

    2017-01-01

    How do ideas evolve in the context of collaborative design? This research explores the framing strategies and tools involved in the co-construction of a shared understanding in the early stages of a design project. We observed a team of four industrial design students working to design a pop-up shop. We found that, while the key design elements of…

  5. Framing and visual type: Effect on future Zika vaccine uptake intent

    Science.gov (United States)

    Guidry, Jeanine P.D.; Carlyle, Kellie E.; LaRose, Jessica G.; Perrin, Paul; Ryan, Mark; Messner, Marcus; Adams, Jay

    2018-01-01

    Introduction The Zika virus is associated with the birth defect microcephaly, and while a vaccine was not available in early- 2017, several were under development. This study’s purpose was to identify effective communication strategies to promote uptake of a new vaccine, particularly among women of reproductive age. Design and methods In order to study the effects of Zika message framing (gain vs. loss) and visual type (photo vs. infographic) on future Zika vaccine uptake intent, a 2×2 between-subjects experiment was performed via an online survey in 2017 among 339 U.S. women of reproductive age (18-49 years). Participants were exposed to one of four messages, all resembling Instagram posts: gain-framed vs. loss-framed infographic, and gain-framed vs. loss-framed photo. These messages were followed by questions about Zika vaccine uptake intent as well as intermediate psychosocial variables that could lead to intent. Results There was no interaction between framing and visual type (P=0.116), and there was no effect for framing (P=0.185) or visual type (P=0.724) on future Zika vaccine uptake intent, which is likely indicative of insufficient dosage of the intervention. However, when focusing on intermediate psychosocial constructs that are known to influence behavior and intent, gain-framed messages were more effective in increasing subjective norms (P=0.005) as related to a future Zika vaccine, as well as perceived benefits (P=0.016) and self-efficacy (P=0.032). Conclusions Gain-framed messages seem to be more effective than loss-framed messages to increase several constructs that could, in turn, affect future Zika vaccine uptake intent. This is a novel finding since, traditionally, loss-framed messages are considered more beneficial in promoting vaccine-related health behaviors. Significance for public healthThe study described in this paper is significant for the field of public health for several reasons: It takes a proactive approach in studying messaging

  6. Light escape cones in local reference frames of Kerr-de Sitter black hole spacetimes and related black hole shadows

    Science.gov (United States)

    Stuchlík, Zdeněk; Charbulák, Daniel; Schee, Jan

    2018-03-01

    We construct the light escape cones of isotropic spot sources of radiation residing in special classes of reference frames in the Kerr-de Sitter (KdS) black hole spacetimes, namely in the fundamental class of `non-geodesic' locally non-rotating reference frames (LNRFs), and two classes of `geodesic' frames, the radial geodesic frames (RGFs), both falling and escaping, and the frames related to the circular geodesic orbits (CGFs). We compare the cones constructed in a given position for the LNRFs, RGFs, and CGFs. We have shown that the photons locally counter-rotating relative to LNRFs with positive impact parameter and negative covariant energy are confined to the ergosphere region. Finally, we demonstrate that the light escaping cones govern the shadows of black holes located in front of a radiating screen, as seen by the observers in the considered frames. For shadows related to distant static observers the LNRFs are relevant.

  7. The struggle with employee engagement: Measures and construct clarification using five samples.

    Science.gov (United States)

    Byrne, Zinta S; Peters, Janet M; Weston, James W

    2016-09-01

    Among scholarly researchers, the Utrecht Work Engagement Scale (UWES) is a popular scale for assessing employee or work engagement. However, challenges to the scale's validity have raised major concerns about the measurement and conceptualization of engagement as a construct. Across 4 field samples, we examined 2 measures of engagement, the UWES and the Job Engagement Scale (JES), in both factor structure and patterns of relationships with theoretically hypothesized antecedents and consequences. In a fifth field sample, we examined the construct-level relationships between engagement and related variables, while controlling for sources of measurement error (i.e., item-specific factor, scale-specific factor, random response, and transient). By examining 2 measures, each derived from different theoretical bases, we provide unique insight into the measurement and construct of engagement. Our results show that, although correlated, the JES and UWES are not interchangeable. The UWES, more so than the JES, assesses engagement with overlap from other job attitudes, requiring improvement in the measurement of engagement. We offer guidance as to when to use each measure. Furthermore, by isolating the construct versus measurement of engagement relative to burnout, commitment, stress, and psychological meaningfulness and availability, we determined (a) the engagement construct is not the same as the opposite of burnout, warranting a reevaluation of the opposite-of-burnout conceptualization of engagement; and (b) psychological meaningfulness and engagement are highly correlated and likely reciprocally related, necessitating a modification to the self-role-expression conceptualization of engagement. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  8. Riesz frames and approximation of the frame coefficients

    DEFF Research Database (Denmark)

    Casazza, P.; Christensen, Ole

    1998-01-01

    A frame is a fmaily {f i } i=1 ∞ of elements in a Hilbert space with the property that every element in can be written as a (infinite) linear combination of the frame elements. Frame theory describes how one can choose the corresponding coefficients, which are called frame coefficients. From...... the mathematical point of view this is gratifying, but for applications it is a problem that the calculation requires inversion of an operator on . The projection method is introduced in order to avoid this problem. The basic idea is to consider finite subfamilies {f i } i=1 n of the frame and the orthogonal...... projection Pn onto its span. For has a representation as a linear combination of fi, i=1,2,..., n and the corresponding coefficients can be calculated using finite dimensional methods. We find conditions implying that those coefficients converge to the correct frame coefficients as n→∞, in which case we have...

  9. Negativity bias and task motivation: testing the effectiveness of positively versus negatively framed incentives.

    Science.gov (United States)

    Goldsmith, Kelly; Dhar, Ravi

    2013-12-01

    People are frequently challenged by goals that demand effort and persistence. As a consequence, philosophers, psychologists, economists, and others have studied the factors that enhance task motivation. Using a sample of undergraduate students and a sample of working adults, we demonstrate that the manner in which an incentive is framed has implications for individuals' task motivation. In both samples we find that individuals are less motivated when an incentive is framed as a means to accrue a gain (positive framing) as compared with when the same incentive is framed as a means to avoid a loss (negative framing). Further, we provide evidence for the role of the negativity bias in this effect, and highlight specific populations for whom positive framing may be least motivating. Interestingly, we find that people's intuitions about when they will be more motivated show the opposite pattern, with people predicting that positively framed incentives will be more motivating than negatively framed incentives. We identify a lay belief in the positive correlation between enjoyment and task motivation as one possible factor contributing to the disparity between predicted and actual motivation as a result of the framing of the incentive. We conclude with a discussion of the managerial implications for these findings. PsycINFO Database Record (c) 2013 APA, all rights reserved.

  10. Frames of exponentials:lower frame bounds for finite subfamilies, and approximation of the inverse frame operator

    DEFF Research Database (Denmark)

    Christensen, Ole; Lindner, Alexander M

    2001-01-01

    We give lower frame bounds for finite subfamilies of a frame of exponentials {e(i lambdak(.))}k is an element ofZ in L-2(-pi,pi). We also present a method for approximation of the inverse frame operator corresponding to {e(i lambdak(.))}k is an element ofZ, where knowledge of the frame bounds for...

  11. The spaces in the looking glass: stilling the frame/framing the still

    Directory of Open Access Journals (Sweden)

    Marvin E. Kirsh

    2015-06-01

    Full Text Available The purpose of this writing is to propose a frame of view, a form as the eternal world element, that is compatible with paradox within the history of ideas, modern discovery as they confront one another. Under special consideration are problems of representation of phenomena, life, the cosmos as the rational facility of mind confronts the physical/perceptual, and itself. Current topics in pursuit are near as diverse and numbered as are the possibilities for a world composed strictly of uniqueness able to fill infinite space; it is assumed that not all of the paths chosen in contemporary pursuits will produce coherent determinations in an appropriate frame able to accommodate a world of nominals in motion, containing motion, and is commensurate with basic physical law and the propagation of form, change from within. Intended as a potential guiding post for the aim of reason seeking to select, define and capture topics, chosen as special examples are the works of logistician/mathematician Lewis Carroll as he presents a paradox of actuality verses the reality of perception in Alice in Wonderland, the theory of relativity of Albert Einstein as he fails to elaborate a mathematics to communicate an inertial frame of reference, and the reconstruction ideas of Jacques Derrida as he refers for contrast with the scientific world view constructed of dualisms, monisms that are conceived to have no opposites. Supporting discussion is evolved from the works of Bertrand Russell, Erwin Schrodinger, Jurgen Habermas, Bronislaw Malinowski, Michel Foucault.

  12. High stability space frame for a large fusion laser

    International Nuclear Information System (INIS)

    Hurley, C.A.; Myall, J.O.

    1975-01-01

    The Shiva laser system is a large neodymium glass laser target irradiation facility being constructed at LLL to perform laser fusion experiments. A frame is being constructed to support the large number of laser components that make up the Shiva system. Twenty laser chains composed of amplifiers, spatial filters, polarizers, rotators, and mirrors will be arranged in an optimum geometry so that each beam arrives at the target simultaneously and within alignment tolerances. This frame is capable of supporting approximately 600 individual component assemblies and maintaining a tolerance of +-4-μrad rotation between any two points over a period of 100 s. Consideration has been given to the positional stability and support of the components, the geometrical array of stacked beams with respect to the oscillator and target, the flow of utilities (e.g., power cables and cooling gas pipes), good accessibility for operation and maintenance, and adaptability for change and growth

  13. Framing Pemberitaan Citra Politik Capres 2014 di Harian Solopos

    Directory of Open Access Journals (Sweden)

    Puji Widi Astutik

    2016-03-01

    Full Text Available The article tries to find out the construction of the image formation in the daily Solopos 2014 candidates. Basic theoretically in this paper uses descriptive analysis method with a form of text analysis models Zhongdang Pan and Gerald M. Kosicki through four units of analysis, syntax, script, thematic, and Rhetorical. Framing analysis is used to see how the image formation through the political news in the Daily Solopos 2014 candidates. Through this analysis can be found that the construction of a shadow image (mirror image performed on the outlook for both candidates figure formed by the track record of each kandindat. Joko Widodo figure in the frame with the figure of the fight for the people and work for the people, while the figure Prabowo has a bad track record as it is considered to participate in the abduction tragedy in which 98 activists at that time as a military Prabowo.

  14. Application of monosymmetrical I-beams in light metal frames with variable stiffness

    Directory of Open Access Journals (Sweden)

    I.O. Sklyarov

    2016-05-01

    Full Text Available The article is devoted to effectiveness of using of monosymmetrical I-beams with flexible wall frame structures of variable section, features of their calculation and design. Aim: The aim of research is to confirm the feasibility of I-beams with flexible wall bearing as light metal skeletons for buildings of the universal assignment. Materials and Methods: In order to reduce the metal consumption a frame is conventionally divided into several sections according to bending moment diagrams so that in the more compressed zone section the belt of great area was located, and in the stretched or less intense zone the lesser belt was installed. The resulting sections have smaller area in compare to symmetric profiles. Additional reduce bending moments provided as a result of displacement of elements axes with variable cross section. Results: The calculations and selection of sections of the frame have shown that it can be achieved the reducing of bearing elements weight by 10% compared to the symmetrical profiles of variable stiffness due to using monosymmetrical sections. The effectiveness of the proposed constructive solution is confirmed by compare of the projected weight frame construction with existing analogue. The symmetrical frame profile is 15.3% lighter; the monosymmetrical frame profile is 27% lighter. Conclusions: Analysis of stress-strain state structures shown: first, through asymmetrical profile there is a shifting of the center of gravity section, which leads to a redistribution of internal forces in the frame; secondly, because of the small cross-sectional area of the stretched zones more difficult to ensure the stability of the plane form of bending beams, which leads to the necessity to disconnect areas curtain beams by constraints of smaller steps.

  15. Experimental studies of Steel Corrugated Constructions

    Directory of Open Access Journals (Sweden)

    Lazarev Yuriy

    2016-01-01

    Full Text Available The purpose of this particular article is to assess existing calculations of steel corrugated constructions. Steel Corrugated Construction is a perspective type of constructions, which is exhibiting numerous advantages in comparison with one that currently applied in automobile and railroad networks (reinforced concrete water-throughput pipes, reinforced concrete frame bridges. The evaluation of experimental data on models of constructions of this particular type has been carried out in order to improve calculations of Steel Corrugated Constructions.

  16. Quantum frames

    Science.gov (United States)

    Brown, Matthew J.

    2014-02-01

    The framework of quantum frames can help unravel some of the interpretive difficulties i the foundation of quantum mechanics. In this paper, I begin by tracing the origins of this concept in Bohr's discussion of quantum theory and his theory of complementarity. Engaging with various interpreters and followers of Bohr, I argue that the correct account of quantum frames must be extended beyond literal space-time reference frames to frames defined by relations between a quantum system and the exosystem or external physical frame, of which measurement contexts are a particularly important example. This approach provides superior solutions to key EPR-type measurement and locality paradoxes.

  17. Frame scaling function sets and frame wavelet sets in Rd

    International Nuclear Information System (INIS)

    Liu Zhanwei; Hu Guoen; Wu Guochang

    2009-01-01

    In this paper, we classify frame wavelet sets and frame scaling function sets in higher dimensions. Firstly, we obtain a necessary condition for a set to be the frame wavelet sets. Then, we present a necessary and sufficient condition for a set to be a frame scaling function set. We give a property of frame scaling function sets, too. Some corresponding examples are given to prove our theory in each section.

  18. Quantum mechanics in noninertial reference frames: Violations of the nonrelativistic equivalence principle

    International Nuclear Information System (INIS)

    Klink, W.H.; Wickramasekara, S.

    2014-01-01

    In previous work we have developed a formulation of quantum mechanics in non-inertial reference frames. This formulation is grounded in a class of unitary cocycle representations of what we have called the Galilean line group, the generalization of the Galilei group that includes transformations amongst non-inertial reference frames. These representations show that in quantum mechanics, just as is the case in classical mechanics, the transformations to accelerating reference frames give rise to fictitious forces. A special feature of these previously constructed representations is that they all respect the non-relativistic equivalence principle, wherein the fictitious forces associated with linear acceleration can equivalently be described by gravitational forces. In this paper we exhibit a large class of cocycle representations of the Galilean line group that violate the equivalence principle. Nevertheless the classical mechanics analogue of these cocycle representations all respect the equivalence principle. -- Highlights: •A formulation of Galilean quantum mechanics in non-inertial reference frames is given. •The key concept is the Galilean line group, an infinite dimensional group. •A large class of general cocycle representations of the Galilean line group is constructed. •These representations show violations of the equivalence principle at the quantum level. •At the classical limit, no violations of the equivalence principle are detected

  19. Preference for gain- or loss-framed electronic cigarette prevention messages.

    Science.gov (United States)

    Kong, Grace; Cavallo, Dana A; Camenga, Deepa R; Morean, Meghan E; Krishnan-Sarin, Suchitra

    2016-11-01

    Effective electronic cigarette (e-cigarette) prevention messages are needed to combat the rising popularity/uptake of e-cigarettes among youth. We examined preferences for e-cigarette prevention messages that either emphasized gains (e.g., You save money by not using e-cigarettes) or losses (e.g., You spend money by using e-cigarettes) among adolescents and young adults. Using surveys in two middle schools, four high schools, and one college in CT (N=5405), we assessed students' preferences for gain- or loss-framed e-cigarette prevention messages related to four themes: financial cost, health risks, addiction potential, and social labeling as a smoker. We also assessed whether preferences for each message framing theme differed by sex, school level, cigarette-use status, and e-cigarette use-status. We also examined whether preference for message framing differed by cigarette and e-cigarette susceptibility status among never e-cigarette users. Overall, loss-framing was preferred for message themes related to health risks, addiction potential, and social labeling as a smoker, whereas gain-framing was preferred for message themes related to financial cost. Logistic regression analyses showed that 1) females preferred loss-framed messages for all themes relative to males, 2) lifetime e-cigarette users preferred loss-framed health risks and social labeling messages relative to never users, and 3) high school students preferred gain-framed social labeling messages relative to college students. The preference for message framing did not differ by cigarette or e-cigarette susceptibility. Preference for message framing differed by themes and individual characteristics. This formative research could inform the construction of persuasive e-cigarette prevention messages. Copyright © 2016. Published by Elsevier Ltd.

  20. Isu HAM dalam Kontestasi Pemilu 2014 Sebuah Pendekatan Framing dan Ideologi Media

    OpenAIRE

    Halimatusa’diah, Ms

    2016-01-01

    Research related to the problem of how the media frame the issue of human rights violations committed by the presidential candidate Prabowo Subianto and the background ideology behind the media presentation of the issue. This research aims to answer how vivanews.com mediaindonesia.com and framing the issues surrounding human rights violations perpetrated Prabowo Subianto. Theoretical thought that became the cornerstone of thought in this research is the theory of social construction of Berger...

  1. Riesz Frames and Approximation of the Frame Coefficients

    DEFF Research Database (Denmark)

    Christensen, Ole

    1996-01-01

    A frame is a familyof elements in a Hilbert space with the propertythat every element in the Hilbert space can be written as a (infinite)linear combination of the frame elements. Frame theory describes howone can choose the corresponding coefficients, which are calledframe coefficients. From...... the mathematical point of view this isgratifying, but for applications it is a problem that the calculationrequires inversion of an operator on the Hilbert space.The projection method is introduced in order to avoid this problem.The basic idea is to consider finite subfamiliesof the frame and the orthogonal...... projection onto its span. Forfin QTR H,P_nf has a representation as a linear combinationof f_i,i=1,2,..,n, and the corresponding coefficients can be calculatedusing finite dimensional methods. We find conditions implying that thosecoefficients converge to the correct frame coefficients as n goes...

  2. Counterexamples to the B-spline Conjecture for Gabor Frames

    DEFF Research Database (Denmark)

    Lemvig, Jakob; Nielsen, Kamilla Haahr

    2016-01-01

    The frame set conjecture for B-splines Bn, n≥2, states that the frame set is the maximal set that avoids the known obstructions. We show that any hyperbola of the form ab=r, where r is a rational number smaller than one and a and b denote the sampling and modulation rates, respectively, has infin...

  3. Experimental investigations into in-plane stiffness and strength of steel frames with precast concrete infill panels

    NARCIS (Netherlands)

    Hoenderkamp, J.C.D.; Hofmeyer, H.; Snijder, H.H.; Richard Liew, J.; Choo, Y.S.

    2007-01-01

    At Eindhoven University of Technology a research program on composite construction is underway aiming at the development of design rules for steel frames with precast concrete infill panels subject to horizontal loading. In two projects, 3 by 3 m steel frames are infilled with concrete: solid

  4. Looking Closer at the Effects of Framing on Risky Choice: An Item Response Theory Analysis.

    Science.gov (United States)

    Sickar; Highhouse

    1998-07-01

    Item response theory (IRT) methodology allowed an in-depth examination of several issues that would be difficult to explore using traditional methodology. IRT models were estimated for 4 risky-choice items, answered by students under either a gain or loss frame. Results supported the typical framing finding of risk-aversion for gains and risk-seeking for losses but also suggested that a latent construct we label preference for risk was influential in predicting risky choice. Also, the Asian Disease item, most often used in framing research, was found to have anomalous statistical properties when compared to other framing items. Copyright 1998 Academic Press.

  5. Mapping Cultural Frame Shifting in Interaction Design with Blending Theory

    DEFF Research Database (Denmark)

    Markussen, Thomas; Krogh, Peter Gall

    2008-01-01

    In this paper, we introduce Gilles Fauconnier & Mark Turner's blending theory as a new conceptual framework for explaining ‘cultural frame shifting' in interaction design. Cultural frame shifting is when people, through their explorative use of technology, are required imaginatively to reorganize...... their cultural background knowledge and expectations. In current HCI research it has occasionally been pointed out that a proper understanding of this phenomenon hinges on addressing the relationship between embodied interaction and cultural meaning construction as part of a larger interactive system. However...... the network model of mental spaces from Fauconnier & Turner's blending theory onto video material and interviews from initial qualitative use studies of a design case. In so doing we explore and argue for how meaning formation and embodied cognition coalesce in cultural frame shifting and provide a tool...

  6. Body frames and frame singularities for three-atom systems

    International Nuclear Information System (INIS)

    Littlejohn, R.G.; Mitchell, K.A.; Aquilanti, V.; Cavalli, S.

    1998-01-01

    The subject of body frames and their singularities for three-particle systems is important not only for large-amplitude rovibrational coupling in molecular spectroscopy, but also for reactive scattering calculations. This paper presents a geometrical analysis of the meaning of body frame conventions and their singularities in three-particle systems. Special attention is devoted to the principal axis frame, a certain version of the Eckart frame, and the topological inevitability of frame singularities. The emphasis is on a geometrical picture, which is intended as a preliminary study for the more difficult case of four-particle systems, where one must work in higher-dimensional spaces. The analysis makes extensive use of kinematic rotations. copyright 1998 The American Physical Society

  7. Pediatric and adolescent applications of the Taylor Spatial Frame.

    Science.gov (United States)

    Paloski, Michael; Taylor, Benjamin C; Iobst, Christopher; Pugh, Kevin J

    2012-06-01

    Limb deformity can occur in the pediatric and adolescent populations from multiple etiologies: congenital, traumatic, posttraumatic sequelae, oncologic, and infection. Correcting these deformities is important for many reasons. Ilizarov popularized external fixation to accomplish this task. Taylor expanded on this by designing an external fixator in 1994 with 6 telescoping struts that can be sequentially manipulated to achieve multiaxial correction of deformity without the need for hinges or operative frame alterations. This frame can be used to correct deformities in children and has shown good anatomic correction with minimal morbidity. The nature of the construct and length of treatment affects psychosocial factors that the surgeon and family must be aware of prior to treatment. An understanding of applications of the Taylor Spatial Frame gives orthopedic surgeons an extra tool to correct simple and complex deformities in pediatric and adolescent patients. Copyright 2012, SLACK Incorporated.

  8. Development Directions for Various Types of the Light Wood-Framed Structures

    Science.gov (United States)

    Malesza, J.; Baszeń, M.; Miedziałowski, Cz

    2017-11-01

    The paper presents current trends in the development of the wood-framed structures. Authors describe the evolution of the technology of implementation, the production process of precast elements of buildings as well as selected realization on the site of these kinds of structures. The attention has been paid to the effect of implementation phases on construction and erecting technology of the wood-framed structures. The paper draws attention to the importance and enhancement of structural analysis of structures in individual phases of building realization.

  9. A Student in Distress: Moral Frames and Bystander Behavior in School

    OpenAIRE

    Thornberg, Robert

    2010-01-01

    The purpose of this study was to investigate and generate a grounded theory on how and why students behave as they do in school situations in which they witness another student in distress. Fieldwork and interviews were conducted in 2 Swedish elementary schools and guided by a grounded theory approach. The study resulted in a grounded theory of moral frames in bystander situations in school. In this study, 5 main moral frames of school have been identified: (a) the moral construction of the g...

  10. Sustainability: Actuality and necessity in the construction sector in Colombia

    International Nuclear Information System (INIS)

    Acevedo Agudelo, Harlem; Vasquez Hernandez, Alejandro; Ramirez Cardona, Diego Alejandro

    2012-01-01

    The construction industry, a part of being essential to achieve the society development, is also one of the main generators of solid waste and pollution, and it is also responsible for a great part of the landscape transformation and the energy usage. These are enough reasons for the industry not to be indifferent to the actual environmental problematic. This paper, which is intended for academic and professional community generally, presents a diagnosis about the current state of construction in Colombia regarding the environmental impact that it generates. To this end, it exposes the Colombian construction industry framed-related to its environmental impact, and documents, chronologically, the practices and strategies that have been used to reduce the negative impact on the environment throughout the time until nowadays. Finally, this document presents a survey result applied to a representative sample of constructive firms of the Valle de Aburra, Antioquia, where several aspects, regarding the concept of sustainable building and the environmental actions that the firm carries out, were inquired.

  11. Study on comparison of special moment frame steel structure (SMF) and base isolation special moment frame steel structure (BI-SMF) in Indonesia

    Science.gov (United States)

    Setiawan, Jody; Nakazawa, Shoji

    2017-10-01

    This paper discusses about comparison of seismic response behaviors, seismic performance and seismic loss function of a conventional special moment frame steel structure (SMF) and a special moment frame steel structure with base isolation (BI-SMF). The validation of the proposed simplified estimation method of the maximum deformation of the base isolation system by using the equivalent linearization method and the validation of the design shear force of the superstructure are investigated from results of the nonlinear dynamic response analysis. In recent years, the constructions of steel office buildings with seismic isolation system are proceeding even in Indonesia where the risk of earthquakes is high. Although the design code for the seismic isolation structure has been proposed, there is no actual construction example for special moment frame steel structure with base isolation. Therefore, in this research, the SMF and BI-SMF buildings are designed by Indonesian Building Code which are assumed to be built at Padang City in Indonesia. The material of base isolation system is high damping rubber bearing. Dynamic eigenvalue analysis and nonlinear dynamic response analysis are carried out to show the dynamic characteristics and seismic performance. In addition, the seismic loss function is obtained from damage state probability and repair cost. For the response analysis, simulated ground accelerations, which have the phases of recorded seismic waves (El Centro NS, El Centro EW, Kobe NS and Kobe EW), adapted to the response spectrum prescribed by the Indonesian design code, that has, are used.

  12. Real-time construction and visualisation of drift-free video mosaics from unconstrained camera motion

    Directory of Open Access Journals (Sweden)

    Mateusz Brzeszcz

    2015-08-01

    Full Text Available This work proposes a novel approach for real-time video mosaicking facilitating drift-free mosaic construction and visualisation, with integrated frame blending and redundancy management, that is shown to be flexible to a range of varying mosaic scenarios. The approach supports unconstrained camera motion with in-sequence loop closing, variation in camera focal distance (zoom and recovery from video sequence breaks. Real-time performance, over extended duration sequences, is realised via novel aspects of frame management within the mosaic representation and thus avoiding the high data redundancy associated with temporally dense, spatially overlapping video frame inputs. This managed set of image frames is visualised in real time using a dynamic mosaic representation of overlapping textured graphics primitives in place of the traditional globally constructed, and hence frequently reconstructed, mosaic image. Within this formulation, subsequent optimisation occurring during online construction can thus efficiency adjust relative frame positions via simple primitive position transforms. Effective visualisation is similarly facilitated by online inter-frame blending to overcome the illumination and colour variance associated with modern camera hardware. The evaluation illustrates overall robustness in video mosaic construction under a diverse range of conditions including indoor and outdoor environments, varying illumination and presence of in-scene motion on varying computational platforms.

  13. Moisture Performance of Energy-Efficient and Conventional Wood-Frame Wall Assemblies in a Mixed-Humid Climate

    Science.gov (United States)

    Samuel Glass; Vladimir Kochkin; S. Drumheller; Lance Barta

    2015-01-01

    Long-term moisture performance is a critical consideration for design and construction of building envelopes in energy-efficient buildings, yet field measurements of moisture characteristics for highly insulated wood-frame walls in mixed-humid climates are lacking. Temperature, relative humidity, and moisture content of wood framing and oriented strand board (OSB)...

  14. Behaviour of Strengthened RC Frames with Eccentric Steel Braced Frames

    Science.gov (United States)

    Kamanli, Mehmet; Unal, Alptug

    2017-10-01

    After devastating earthquakes in recent years, strengthening of reinforced concrete buildings became an important research topic. Reinforced concrete buildings can be strengthened by steel braced frames. These steel braced frames may be made of concentrically or eccentrically indicated in Turkish Earthquake Code 2007. In this study pushover analysis of the 1/3 scaled 1 reinforced concrete frame and 1/3 scaled 4 strengthened reinforced concrete frames with internal eccentric steel braced frames were conducted by SAP2000 program. According to the results of the analyses conducted, load-displacement curves of the specimens were compared and evaluated. Adding eccentric steel braces to the bare frame decreased the story drift, and significantly increased strength, stiffness and energy dissipation capacity. In this strengthening method lateral load carrying capacity, stiffness and dissipated energy of the structure can be increased.

  15. Finite Element Analysis of Composite Aircraft Fuselage Frame

    Science.gov (United States)

    Dandekar, Aditya Milind

    Composites have been introduced in aircraft industries, for their stronger, stiffer, and lighter properties than their metal-alloys counterparts. The general purpose of an aircraft is to transport commercial or military payload. Aircraft frames primarily maintains the shape of fuselage and prevent instability of the structure. Fuselage is similar as wing in construction which consist of longitudinal elements (longerons and stringers), transverse elements (frames and bulkheads) and its external skin. The fuselage is subjected to forces such as the wing reactions, landing gear reaction, empennage reaction, inertia forces subjected due to size and weight, internal pressure forces due to high altitude. Frames also ensure fail-safe design against skin crack propagation due to hoops stress. Ideal fuselage frames cross section is often circular ring shape with a frame cap of Z section. They are mainly made up of light alloy commonly used is aluminium alloys such as Al-2024, Al-7010, Al-7050, Al-7175. Aluminium alloys have good strength to density ratios in compression and bending of thin plate. A high strength to weight ratio of composite materials can result in a lighter aircraft structure or better safety factor. This research focuses on analysis of fuselage frame under dynamic load condition with change in material. Composites like carbon fibre reinforced plastics [CFRP] and glass fibre reinforced plastics [GFRP] are compared with traditional aluminium alloy Al-7075. The frame is subjected to impact test by dropping it at a velocity of 30 ft. / secs from a height of 86 inch from its centre of gravity. These parameters are considered in event of failure of landing gear, and an aircraft is subject to belly landing or gear-up landing. The shear flow is calculated due to impact force which acts in radial direction. The frame is analysed under static structural and explicit dynamic load conditions. Geometry is created in ANSYS Design Modeler. Analysis setup is created using

  16. Weighting Strategies for Combining Data from Dual-Frame Telephone Surveys: Emerging Evidence from Australia

    Directory of Open Access Journals (Sweden)

    Baffour Bernard

    2016-09-01

    Full Text Available Until quite recently, telephone surveys have typically relied on landline telephone numbers. However, with the increasing popularity and affordability of mobile phones, there has been a surge in households that do not have landline connections. Additionally, there has been a decline in the response rates and population coverage of landline telephone surveys, creating a challenge to collecting representative social data. Dual-frame telephone surveys that use both landline and mobile phone sampling frames can overcome the incompleteness of landline-only telephone sampling. However, surveying mobile phone users introduces new complexities in sampling, nonresponse measurement and statistical weighting. This article examines these issues and illustrates the consequences of failing to include mobile-phone-only users in telephone surveys using data from Australia. Results show that there are significant differences in estimates of populations’ characteristics when using information solely from the landline or mobile telephone sample. These biases in the population estimates are significantly reduced when data from the mobile and landline samples are combined and appropriate dual-frame survey estimators are used. The optimal choice of a dual-frame estimation strategy depends on the availability of good-quality information that can account for the differential patterns of nonresponse by frame.

  17. Framing the frame: How task goals determine the likelihood and direction of framing effects

    OpenAIRE

    Todd McElroy; John J. Seta

    2007-01-01

    We examined how the goal of a decision task influences the perceived positive, negative valence of the alternatives and thereby the likelihood and direction of framing effects. In Study 1 we manipulated the goal to increase, decrease or maintain the commodity in question and found that when the goal of the task was to increase the commodity, a framing effect consistent with those typically observed in the literature was found. When the goal was to decrease, a framing effect opposite to the ty...

  18. 2nd International Conference on Historic Earthquake-Resistant Timber Frames in the Mediterranean Area

    CERN Document Server

    Machado, José; Costa, Alfredo; Candeias, Paulo; Ruggieri, Nicola; Catarino, José

    2016-01-01

    This book presents a selection of the best papers from the HEaRT 2015 conference, held in Lisbon, Portugal, which provided a valuable forum for engineers and architects, researchers and educators to exchange views and findings concerning the technological history, construction features and seismic behavior of historical timber-framed walls in the Mediterranean countries. The topics covered are wide ranging and include historical aspects and examples of the use of timber-framed construction systems in response to earthquakes, such as the gaiola system in Portugal and the Bourbon system in southern Italy; interpretation of the response of timber-framed walls to seismic actions based on calculations and experimental tests; assessment of the effectiveness of repair and strengthening techniques, e.g., using aramid fiber wires or sheets; and modelling analyses. In addition, on the basis of case studies, a methodology is presented that is applicable to diagnosis, strengthening and improvement of seismic performance ...

  19. Geometric and Texture Inpainting by Gibbs Sampling

    DEFF Research Database (Denmark)

    Gustafsson, David Karl John; Pedersen, Kim Steenstrup; Nielsen, Mads

    2007-01-01

    . In this paper we use the well-known FRAME (Filters, Random Fields and Maximum Entropy) for inpainting. We introduce a temperature term in the learned FRAME Gibbs distribution. By sampling using different temperature in the FRAME Gibbs distribution, different contents of the image are reconstructed. We propose...... a two step method for inpainting using FRAME. First the geometric structure of the image is reconstructed by sampling from a cooled Gibbs distribution, then the stochastic component is reconstructed by sample froma heated Gibbs distribution. Both steps in the reconstruction process are necessary...

  20. Mars Science Laboratory Frame Manager for Centralized Frame Tree Database and Target Pointing

    Science.gov (United States)

    Kim, Won S.; Leger, Chris; Peters, Stephen; Carsten, Joseph; Diaz-Calderon, Antonio

    2013-01-01

    The FM (Frame Manager) flight software module is responsible for maintaining the frame tree database containing coordinate transforms between frames. The frame tree is a proper tree structure of directed links, consisting of surface and rover subtrees. Actual frame transforms are updated by their owner. FM updates site and saved frames for the surface tree. As the rover drives to a new area, a new site frame with an incremented site index can be created. Several clients including ARM and RSM (Remote Sensing Mast) update their related rover frames that they own. Through the onboard centralized FM frame tree database, client modules can query transforms between any two frames. Important applications include target image pointing for RSM-mounted cameras and frame-referenced arm moves. The use of frame tree eliminates cumbersome, error-prone calculations of coordinate entries for commands and thus simplifies flight operations significantly.

  1. Chiral Schwinger model with the Faddeevian regularization in the light-front frame: construction of the gauge-invariant theory through the Stueckelberg term, Hamiltonian and BRST formulations

    International Nuclear Information System (INIS)

    Kulshreshtha, U.

    1998-01-01

    A chiral Schwinger model with the Faddeevian regularization a la Mitra is studied in the light-front frame. The front-form theory is found to be gauge-non-invariant. The Hamiltonian formulation of this gauge-non-invariant theory is first investigated and then the Stueckelberg term for this theory is constructed. Finally, the Hamiltonian and BRST formulations of the resulting gauge-invariant theory, obtained by the inclusion of the Stueckelberg term in the action of the above gauge-non-invariant theory, are investigated with some specific gauge choices. (orig.)

  2. Behaviour of Strengthened RC Frames with Eccentric Steel Braced Frames

    Directory of Open Access Journals (Sweden)

    Kamanli Mehmet

    2017-01-01

    Full Text Available After devastating earthquakes in recent years, strengthening of reinforced concrete buildings became an important research topic. Reinforced concrete buildings can be strengthened by steel braced frames. These steel braced frames may be made of concentrically or eccentrically indicated in Turkish Earthquake Code 2007. In this study pushover analysis of the 1/3 scaled 1 reinforced concrete frame and 1/3 scaled 4 strengthened reinforced concrete frames with internal eccentric steel braced frames were conducted by SAP2000 program. According to the results of the analyses conducted, load-displacement curves of the specimens were compared and evaluated. Adding eccentric steel braces to the bare frame decreased the story drift, and significantly increased strength, stiffness and energy dissipation capacity. In this strengthening method lateral load carrying capacity, stiffness and dissipated energy of the structure can be increased.

  3. X/Ka Celestial Frame Improvements: Vision to Reality

    Science.gov (United States)

    Jacobs, C. S.; Bagri, D. S.; Britcliffe, M. J.; Clark, J. E.; Franco, M. M.; Garcia-Miro, C.; Goodhart, C. E.; Horiuchi, S.; Lowe, S. T.; Moll, V. E.; hide

    2010-01-01

    In order to extend the International Celestial Reference Frame from its S/X-band (2.3/8.4 GHz) basis to a complementary frame at X/Ka-band (8.4/32 GHz), we began in mid-2005 an ongoing series of X/Ka observations using NASA s Deep Space Network (DSN) radio telescopes. Over the course of 47 sessions, we have detected 351 extra-galactic radio sources covering the full 24 hours of right ascension and declinations down to -45 degrees. Angular source position accuracy is at the part-per-billion level. We developed an error budget which shows that the main errors arise from limited sensitivity, mismodeling of the troposphere, uncalibrated instrumental effects, and the lack of a southern baseline. Recent work has improved sensitivity by improving pointing calibrations and by increasing the data rate four-fold. Troposphere calibration has been demonstrated at the mm-level. Construction of instrumental phase calibrators and new digital baseband filtering electronics began in recent months. We will discuss the expected effect of these improvements on the X/Ka frame.

  4. Estimating Body Related Soft Biometric Traits in Video Frames

    Directory of Open Access Journals (Sweden)

    Olasimbo Ayodeji Arigbabu

    2014-01-01

    Full Text Available Soft biometrics can be used as a prescreening filter, either by using single trait or by combining several traits to aid the performance of recognition systems in an unobtrusive way. In many practical visual surveillance scenarios, facial information becomes difficult to be effectively constructed due to several varying challenges. However, from distance the visual appearance of an object can be efficiently inferred, thereby providing the possibility of estimating body related information. This paper presents an approach for estimating body related soft biometrics; specifically we propose a new approach based on body measurement and artificial neural network for predicting body weight of subjects and incorporate the existing technique on single view metrology for height estimation in videos with low frame rate. Our evaluation on 1120 frame sets of 80 subjects from a newly compiled dataset shows that the mentioned soft biometric information of human subjects can be adequately predicted from set of frames.

  5. Optical position meters analyzed in the noninertial reference frames

    International Nuclear Information System (INIS)

    Tarabrin, Sergey P.; Seleznyov, Alexander A.

    2008-01-01

    In the framework of general relativity we develop a method for the analysis of the operation of the optical position meters in their photodetectors proper reference frames. These frames are noninertial in general due to the action of external fluctuative forces on meters test masses, including detectors. For comparison we also perform the calculations in the laboratory (globally inertial) reference frame and demonstrate that for certain optical schemes laboratory-based analysis results in unmeasurable quantities, in contrast to the detector-based analysis. We also calculate the response of the simplest optical meters to weak plane gravitational waves and fluctuative motions of their test masses. It is demonstrated that for the round-trip meter analysis in both the transverse-traceless (TT) and local Lorentz (LL) gauges produces equal results, while for the forward-trip meter corresponding results differ in accordance with different physical assumptions (e.g. procedure of clocks synchronization) implicitly underlying the construction of the TT and LL gauges.

  6. 27 CFR 555.207 - Construction of type 1 magazines.

    Science.gov (United States)

    2010-04-01

    ... constructed of, or covered with, a nonsparking material. (3) Wood frame wall construction. The exterior of... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Construction of type 1... Construction of type 1 magazines. A type 1 magazine is a permanent structure: a building, an igloo or “Army...

  7. Beyond gains and losses: the effect of need on risky choice in framed decisions.

    Science.gov (United States)

    Mishra, Sandeep; Fiddick, Laurence

    2012-06-01

    Substantial evidence suggests people are risk-averse when making decisions described in terms of gains and risk-prone when making decisions described in terms of losses, a phenomenon known as the framing effect. Little research, however, has examined whether framing effects are a product of normative risk-sensitive cognitive processes. In 5 experiments, it is demonstrated that framing effects in the Asian disease problem can be explained by risk-sensitivity theory, which predicts that decision makers adjust risk acceptance on the basis of minimal acceptable thresholds, or need. Both explicit and self-determined need requirements eliminated framing effects and affected risk acceptance consistent with risk-sensitivity theory. Furthermore, negative language choice in loss frames conferred the perception of high need and led to the construction of higher minimal acceptable thresholds. The results of this study suggest that risk-sensitivity theory provides a normative rationale for framing effects based on sensitivity to minimal acceptable thresholds, or needs. 2012 APA, all rights reserved

  8. LAIR: A Language for Automated Semantics-Aware Text Sanitization based on Frame Semantics

    DEFF Research Database (Denmark)

    Hedegaard, Steffen; Houen, Søren; Simonsen, Jakob Grue

    2009-01-01

    We present \\lair{}: A domain-specific language that enables users to specify actions to be taken upon meeting specific semantic frames in a text, in particular to rephrase and redact the textual content. While \\lair{} presupposes superficial knowledge of frames and frame semantics, it requires on...... with automated redaction of web pages for subjectively undesirable content; initial experiments suggest that using a small language based on semantic recognition of undesirable terms can be highly useful as a supplement to traditional methods of text sanitization.......We present \\lair{}: A domain-specific language that enables users to specify actions to be taken upon meeting specific semantic frames in a text, in particular to rephrase and redact the textual content. While \\lair{} presupposes superficial knowledge of frames and frame semantics, it requires only...... limited prior programming experience. It neither contain scripting or I/O primitives, nor does it contain general loop constructions and is not Turing-complete. We have implemented a \\lair{} compiler and integrated it in a pipeline for automated redaction of web pages. We detail our experience...

  9. On Parseval Wavelet Frames with Two or Three Generators via the Unitary Extension Principle

    DEFF Research Database (Denmark)

    Christensen, Ole; Kim, Hong Oh; Kim, Rae Young

    2014-01-01

    The unitary extension principle (UEP) by A. Ron and Z. Shen yields a sufficient condition for the construction of Parseval wavelet frames with multiple generators. In this paper we characterize the UEP-type wavelet systems that can be extended to a Parseval wavelet frame by adding just one UEP......-type wavelet system. We derive a condition that is necessary for the extension of a UEP-type wavelet system to any Parseval wavelet frame with any number of generators and prove that this condition is also sufficient to ensure that an extension with just two generators is possible....

  10. Frames and outer frames for Hilbert C^*-modules

    OpenAIRE

    Arambašić, Ljiljana; Bakić, Damir

    2015-01-01

    The goal of the present paper is to extend the theory of frames for countably generated Hilbert $C^*$-modules over arbitrary $C^*$-algebras. In investigating the non-unital case we introduce the concept of outer frame as a sequence in the multiplier module $M(X)$ that has the standard frame property when applied to elements of the ambient module $X$. Given a Hilbert $\\A$-module $X$, we prove that there is a bijective correspondence of the set of all adjointable surjections from the generalize...

  11. Bonobos and chimpanzees exhibit human-like framing effects.

    Science.gov (United States)

    Krupenye, Christopher; Rosati, Alexandra G; Hare, Brian

    2015-02-01

    Humans exhibit framing effects when making choices, appraising decisions involving losses differently from those involving gains. To directly test for the evolutionary origin of this bias, we examined decision-making in humans' closest living relatives: bonobos (Pan paniscus) and chimpanzees (Pan troglodytes). We presented the largest sample of non-humans to date (n = 40) with a simple task requiring minimal experience. Apes made choices between a 'framed' option that provided preferred food, and an alternative option that provided a constant amount of intermediately preferred food. In the gain condition, apes experienced a positive 'gain' event in which the framed option was initially presented as one piece of food but sometimes was augmented to two. In the loss condition, apes experienced a negative 'loss' event in which they initially saw two pieces but sometimes received only one. Both conditions provided equal pay-offs, but apes chose the framed option more often in the positive 'gain' frame. Moreover, male apes were more susceptible to framing than were females. These results suggest that some human economic biases are shared through common descent with other apes and highlight the importance of comparative work in understanding the origins of individual differences in human choice. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

  12. Identifying perceptions of academic reform in pharmacy using a four-frame organizational change model.

    Science.gov (United States)

    Bajis, Dalia; Chaar, Betty; Basheti, Iman A; Moles, Rebekah

    2017-11-10

    In an ever-changing environment, pharmacy education is in the race to catch up and excel to produce competent pharmacists. Examining academic institutions, including schools of pharmacy, their internal systems and framework, it seems appropriate to view these institutions using multiple lenses. Bolman and Deal conceptualized a method to examine organizations using four constructs (structural, human resource, political, and symbolic). The Eastern Mediterranean Region (EMR), with deep-rooted pharmacy education and practice was the setting for this research. To explore factors affecting academic reform in undergraduate pharmacy education in the EMR from stakeholders' and students' perspectives; and to apply Bolman and Deal's four-frame organizational change model to explore how these issues might be viewed. A multiple-method approach was employed and involved collecting, analyzing and integrating qualitative semi-structured interview data with open-ended questions in a survey. Cross-sector stakeholder sample from various EMR countries was recruited and interviewed. Final year pharmacy students from one school of pharmacy in Jordan were surveyed. Emergent themes were indicative that academic reform was addressed by all frames of the Bolman and Deal model. Structural and political frames received substantial weighing pointing to the importance of curricular reform, collaboration and leadership. A need for skillful and role-model teaching academic staff was highlighted, and in harmony with the human resource frame. Issues within the symbolic frame were readily apparent in the data and spanned the other three frames in relation to heritage, customs and cultural barriers. Issues pertinent to academic reform in pharmacy were presented. Viewing change in pharmacy schools from multiple perspectives highlighted the need for structural changes to pharmacy programs, human resource management, political will, leadership, and collaboration. The importance of understanding cultural

  13. Demo : an embedded vision system for high frame rate visual servoing

    NARCIS (Netherlands)

    Ye, Z.; He, Y.; Pieters, R.S.; Mesman, B.; Corporaal, H.; Jonker, P.P.

    2011-01-01

    The frame rate of commercial off-the-shelf industrial cameras is breaking the threshold of 1000 frames-per-second, the sample rate required in high performance motion control systems. On the one hand, it enables computer vision as a cost-effective feedback source; On the other hand, it imposes

  14. Media framing of techno-environmental controversies: A case study of the 'Paper-Mills Conflict’ between Argentina and Uruguay

    Directory of Open Access Journals (Sweden)

    Carina Cortassa

    2014-06-01

    Full Text Available This article embraces the framing studies’ perspective to approach the media construction of the current techno-environmental controversy between Argentina and Uruguay, due to the location of an industrial plant to produce cellulose paper in the uruguayan community of Fray Bentos. The analysis is centered on the respective coverages developed by two argentinean print media –daily newspapers Clarín and Página 12– during three key stages in the evolution of the conflict. A sample composed of 1004 articles was examined using a protocol based in previously tested instruments, which was elaborated to quantify the incidence of five frames established a priori: a environmental; b scientific-technological; c political-juridical; d social; e of economic causes & consequences. The evidence collected indicates that the analyzed media represented the controversy mostly in political-juridical terms and drastically overshadowed its environmental origins and the discrepancies of scientific and technical nature involved in its roots and development. The article discusses some results of the research experience, as well as the limitations and posibilites to extend the framing typology rehearsed here to other media coverages of similar situations, independently of its specific object.

  15. Drawing a Line in Water: Constructing the School Censorship Frame in Popular Music Education

    Science.gov (United States)

    Kallio, Alexis Anja

    2015-01-01

    The apparent ideological tensions between popular musics and formal school contexts raise significant issues regarding teachers' popular repertoire selection processes. Such decision-making may be seen to take place within a school censorship frame, through which certain musics and their accompanying values are promoted, whilst others are…

  16. Frame approximation of pseudo-inverse operators

    DEFF Research Database (Denmark)

    Christensen, Ole

    2001-01-01

    Let T denote an operator on a Hilbert space (H, [.,.]), and let {f(i)}(i=1)(infinity) be a frame for the orthogonal complement of the kernel NT. We construct a sequence of operators {Phi (n)} of the form Phi (n) (.) = Sigma (n)(i=1) [., g(t)(n)]f(i) which converges to the psuedo-inverse T+ of T i...... in the strong operator topology as n --> infinity. The operators {Phi (n)} can be found using finite-dimensional methods. We also prove an adaptive iterative version of the result. (C) 2001 Academic Press....

  17. Pollution monitoring by dosimetry and passive diffusion sampling for evaluation of environmental conditions for paintings in microclimate frames

    DEFF Research Database (Denmark)

    Grøntoft, Terje; Odlyha, Marianne; Mottner, P.

    2010-01-01

    from a synthetic polymer and the Resin Mastic coated Piezo electric Quartz Crystals (RM-PQC) respond to photo-oxidation and showed higher values outside than inside the mc-frames. Two other dosimeters, the Glass Slide Dosimeter (GSD) and the Lead coated Piezo electric Quartz Crystals (L-PQC) respond......Pollutants and their potential degradation of paintings have been measured for the first time in microclimate frames (mc-frames), which are used to protect paintings. The pollutants that were measured include both inorganic pollutants, which originate mainly from external sources, and organic...... samplers were used together with different types of dosimeters. Results show that the dosimeters respond to either the photo-oxidizing conditions or the level of volatile organic acids in the environments both in the museums and within the mc-frames. Two dosimeters, the Early Warning Organic (EWO) made...

  18. Extension of shift-invariant systems in L2(ℝ) to frames

    DEFF Research Database (Denmark)

    Bownik, Marcin; Christensen, Ole; Huang, Xinli

    2012-01-01

    In this article, we show that any shift-invariant Bessel sequence with an at most countable number of generators can be extended to a tight frame for its closed linear span by adding another shift-invariant system with at most the same number of generators. We show that in general this result...... is optimal, by providing examples where it is impossible to obtain a tight frame by adding a smaller number of generators. An alternative construction (which avoids the technical complication of extracting the square root of a positive operator) yields an extension of the given Bessel sequence to a pair...

  19. Framed School--Frame Factors, Frames and the Dynamics of Social Interaction in School

    Science.gov (United States)

    Persson, Anders

    2015-01-01

    This paper aims to show how the Goffman frame perspective can be used in an analysis of school and education and how it can be combined, in such analysis, with the frame factor perspective. The latter emphasizes factors that are determined outside the teaching process, while the former stresses how actors organize their experiences and define…

  20. Mechanical rigidity of the Ortho-SUV frame compared to the Ilizarov frame in the correction of femoral deformity.

    Science.gov (United States)

    Skomoroshko, Petr V; Vilensky, Victor A; Hammouda, Ahmed I; Fletcher, Matt D A; Solomin, Leonid N

    2015-04-01

    The Ortho-SUV frame (OSF) is a novel hexapod circular external fixator which draws upon the innovation of the Ilizarov method and the advantages of hexapod construction in the three-dimensional control of bone segments. Stability of fixation is critical to the success or failure of an external circular fixator for fracture or osteotomy healing. In vitro biomechanical modelling study was performed comparing the stability of the OSF under load in both original form and after dynamisation to the Ilizarov fixator in all zones of the femur utilising optimal frame configuration. A superior performance of the OSF in terms of resistance to deforming forces in both original and dynamised forms over that of the original Ilizarov fixator was found. The OSF shows higher rigidity than the Ilizarov in the control of forces acting upon the femur. This suggests better stabilisation of femoral fractures and osteotomies and thus improved healing with a reduced incidence of instability-related bone segment deformity, non-union and delayed union.

  1. New technologies in Islamic countries. Power engineering, transport, oil industry, machinery construction, building construction and information technologies problems

    International Nuclear Information System (INIS)

    Sharipova, N.S.

    1999-01-01

    The published proceedings contain brief presentations concerning new technologies in power engineering, transport, oil industry, machinery construction, building construction and information technologies presented to the International scientific and technical conference: New technologies in Islamic countries, which was organized within frame work of 6 General Assembly of Federation of engineering Institutes of Islamic countries (FEIIC). (author)

  2. GENDER COGNITION IN RELIGIOUS DISCOURSE: A STUDY OF FRAMING IN THEMATIC HOLY KORAN INTERPRETATION

    OpenAIRE

    Dadang S. Anshori

    2016-01-01

    The study is aimed at describing gender cognition phenomenon in religious discourse in thematic interpretation (tafsir) of the Holy Koran published by the Ministry of Religious Affairs of the Republic of Indonesia. Each interpretation book as a written discourse is different from each other due to author’s cognition frame. This study employs a constructive qualitative approach with technical framing analysis. The data are language data (religious text) that are obtainable from thematic interp...

  3. Network-based H.264/AVC whole frame loss visibility model and frame dropping methods.

    Science.gov (United States)

    Chang, Yueh-Lun; Lin, Ting-Lan; Cosman, Pamela C

    2012-08-01

    We examine the visual effect of whole frame loss by different decoders. Whole frame losses are introduced in H.264/AVC compressed videos which are then decoded by two different decoders with different common concealment effects: frame copy and frame interpolation. The videos are seen by human observers who respond to each glitch they spot. We found that about 39% of whole frame losses of B frames are not observed by any of the subjects, and over 58% of the B frame losses are observed by 20% or fewer of the subjects. Using simple predictive features which can be calculated inside a network node with no access to the original video and no pixel level reconstruction of the frame, we developed models which can predict the visibility of whole B frame losses. The models are then used in a router to predict the visual impact of a frame loss and perform intelligent frame dropping to relieve network congestion. Dropping frames based on their visual scores proves superior to random dropping of B frames.

  4. When message-frame fits salient cultural-frame, messages feel more persuasive

    OpenAIRE

    Uskul, Ayse K.; Oyserman, Daphna

    2010-01-01

    The present study examines the persuasive effects of tailored health messages comparing those tailored to match (versus not match) both chronic cultural frame and momentarily salient cultural frame. Evidence from two studies (Study 1: n = 72 European Americans; Study 2: n = 48 Asian Americans) supports the hypothesis that message persuasiveness increases when chronic cultural frame, health message tailoring and momentarily salient cultural frame all match. The hypothesis was tested using a me...

  5. New technologies in Islamic countries. Power engineering, transport, oil industry, machinery construction, building construction and information technologies problems

    International Nuclear Information System (INIS)

    Sharipova, N.S.

    1999-01-01

    This issue contains papers, which reflect the most important achievements of new technologies in power engineering, transport, oil industry, machinery construction, building construction and information technologies presented to the International Scientific and Technical Conference: New technologies in Islamic countries, which was organized within frame work of 6 General Assembly of Federation of Engineering Institutes of Islamic Countries (FEIIC). (author)

  6. A Unified Transform for LTI Systems—Presented as a (Generalized Frame

    Directory of Open Access Journals (Sweden)

    Van den Hof Paul MJ

    2006-01-01

    Full Text Available We present a set of functions in and show it to be a (tight generalized frame (as presented by G. Kaiser (1994. The analysis side of the frame operation is called the continuous unified transform. We show that some of the well-known transforms (such as Laplace, Laguerre, Kautz, and Hambo result by creating different sampling patterns in the transform domain (or, equivalently, choosing a number of subsets of the original frame. Some of these resulting sets turn out to be generalized (tight frames as well. The work reported here enhances the understanding of the interrelationships between the above-mentioned transforms. Furthermore, the impulse response of every stable finite-dimensional LTI system has a finite representation using the frame we introduce here, with obvious benefits in identification problems.

  7. Design and construction of program frame software of 300 keV/20 mA EBM control panel computerized base

    International Nuclear Information System (INIS)

    Eko Priyono; Saminto

    2015-01-01

    The program frame software of computer based control panel for 300 keV/20 mA EBM has been designed and constructed. This software is used for EBM components operating system, EBM operating parameters monitor and control system. This software contain instructions program for acquisition, actuation, process and display operation parameters data which is made by using visual basic V.6. This software displays some menus i.e. cover menu, main menu, sub menu and sub-sub menu. Performance test was done by integrating software and hardware and then operated the EBM via computer device. The test show that data communication between software and hardware was suitable, EBM components can be operated via computer device, EMB operation parameters can be controlled and monitored in form digital number, bar graph and continuous graphics the device can execute properly all instruction output program of 300 keV/20 mA control panel so the device is ready to use as one of computerize operating system of 300 keV/20 mA. (author)

  8. Problems in Staff and Educational Development Leadership: Solving, Framing, and Avoiding

    Science.gov (United States)

    Blackmore, Paul; Wilson, Andrew

    2005-01-01

    Analysis of interviews using critical incident technique with a sample of leaders in staff and educational development in higher education institutions reveals a limited use of classical problem-solving approaches. However, many leaders are able to articulate ways in which they frame problems. Framing has to do with goals, which may be complex,…

  9. Value Framing: A Prelude to Software Problem Framing

    NARCIS (Netherlands)

    Wieringa, Roelf J.; Gordijn, Jaap; van Eck, Pascal; Cox, K.; Hall, J.G.; Rapanotti, L.

    2004-01-01

    Software problem framing is a way to find specifications for software. Software problem frames can be used to structure the environment of a software system (the machine) and specify desired software properties in such a way that we can show that software with these properties will help achieve the

  10. Molecular frame and recoil frame angular distributions in dissociative photoionization of small molecules

    International Nuclear Information System (INIS)

    Lucchese, R R; Carey, R; Elkharrat, C; Houver, J C; Dowek, D

    2008-01-01

    Photoelectron angular distributions in the dipole approximation can be written with respect to several different reference frames. A brief review of the molecular frame and recoil frame are given. Experimentally, one approach for obtaining such angular distributions is through angle-resolved coincidence measurements of dissociative ionization. If the system dissociates into two heavy fragments, then the recoil frame angular distribution can be measured. Computed molecular frame and recoil frame photoelectron angular distributions are compared to experimental data for the Cl 2p ionization of CH 3 Cl.

  11. Filtering SVM frame-by-frame binary classification in a detection framework

    NARCIS (Netherlands)

    Betancourt Arango, A.; Morerio, P.; Marcenaro, L.; Rauterberg, G.W.M.; Regazzoni, C.S.

    2015-01-01

    Classifying frames, or parts of them, is a common way of carrying out detection tasks in computer vision. However, frame by frame classification suffers from sudden significant variations in image texture, colour and luminosity, resulting in noise in the extracted features and consequently in the

  12. A Theoretical Discourse on the Mediatisation and Framing of Jos Ethno-Religious Conflicts

    Directory of Open Access Journals (Sweden)

    Godfrey Naanlang Danaan

    2017-02-01

    Full Text Available Studies on the role of journalists in the Jos ethno- religious conflicts are enormous, but none examines this phenomenon through the theoretical lenses of mediatisation and news framing to understand the logic that underpins the construction of conflict narratives. While mediatisation describes media logic in news production, news framing suggests the way the narratives which constitute news are constructed. Both theories explain journalistic practices in many respects. For instance, understanding media logic is the first step in identifying journalists’ role in the Jos conflicts which in turn determines the brand of journalism they adopt.The Jos conflicts involve a ‘settler’ group craving for recognition and legitimacy on the one hand, and a group of ‘indigenes’ that insists the territory is its inheritance on the other. Based on critical analysis, this paper argues that journalists impose media logic on their audiences through news framing and make them to understand reality from their own point of view. This effort is a new thinking towards understanding theoretical dimensions to media and/or journalistic interventions in the Jos violent conflicts so that researchers may build on these frameworks.

  13. New characterizations of fusion frames (frames of subspaces)

    Indian Academy of Sciences (India)

    Theory (College Park, MD, 2003) Contemp. Math. 345, Amer. Math. Soc. (RI: Provi- dence) (2004) 87–113. [4] Casazza P G and Kutyniok G, Robustness of Fusion Frames under Erasures of sub- spaces and of Local Frame Vectors, Radon transforms, geometry, and wavelets (LA: New Orleans) (2006) Contemp. Math., Amer.

  14. Unified approach to redshift in cosmological/black hole spacetimes and synchronous frame

    Science.gov (United States)

    Toporensky, A. V.; Zaslavskii, O. B.; Popov, S. B.

    2018-01-01

    Usually, interpretation of redshift in static spacetimes (for example, near black holes) is opposed to that in cosmology. In this methodological note, we show that both explanations are unified in a natural picture. This is achieved if, considering the static spacetime, one (i) makes a transition to a synchronous frame, and (ii) returns to the original frame by means of local Lorentz boost. To reach our goal, we consider a rather general class of spherically symmetric spacetimes. In doing so, we construct frames that generalize the well-known Lemaitre and Painlevé-Gullstand ones and elucidate the relation between them. This helps us to understand, in a unifying approach, how gravitation reveals itself in different branches of general relativity. This framework can be useful for general relativity university courses.

  15. Effective communication of risks to young adults: using message framing and visual aids to increase condom use and STD screening.

    Science.gov (United States)

    Garcia-Retamero, Rocio; Cokely, Edward T

    2011-09-01

    Sexually Transmitted Diseases (STDs)-including HIV/AIDS-are among the most common infectious diseases in young adults. How can we effectively promote prevention and detection of STDs in this high risk population? In a two-phase longitudinal experiment we examined the effects of a brief risk awareness intervention (i.e., a sexual health information brochure) in a large sample of sexually active young adults (n = 744). We assessed the influence of gain- and loss-framed messages, and visual aids, on affective reactions, risk perceptions, attitudes, behavioral intentions, and reported behaviors relating to the prevention and detection of STDs. Results indicate that gain-framed messages induced greater adherence for prevention behaviors (e.g., condom use), whereas loss-framed messages were more effective in promoting illness-detecting behaviors (e.g., making an appointment with a doctor to discuss about STD screening). The influence of the framed messages on prevention and detection of STDs was mediated by changes in participants' attitudes toward the health behaviors along with changes in their behavioral intentions. Moreover, when visual aids were added to the health information, both the gain- and loss-framed messages became equally and highly effective in promoting health behaviors. These results converge with other data indicating that well-constructed visual aids are often among the most highly effective, transparent, fast, memorable, and ethically desirable means of risk communication. Theoretical, economic, and public policy implications of these results are discussed. (c) 2011 APA, all rights reserved.

  16. Composition Feature of the Element Tangent Stiffness Matrix of Geometrically Nonlinear 2D Frame Structures

    Directory of Open Access Journals (Sweden)

    Romanas Karkauskas

    2011-04-01

    Full Text Available The expressions of the finite element method tangent stiffness matrix of geometrically nonlinear constructions are not fully presented in publications. The matrixes of small displacements stiffness are usually presented only. To solve various problems of construction analysis or design and to specify the mode of the real deflection of construction, it is necessary to have a fully described tangent matrix analytical expression. This paper presents a technique of tangent stiffness matrix generation using discrete body total potential energy stationary conditions considering geometrically nonlinear 2D frame element taking account of interelement interaction forces only. The obtained vector-function derivative of internal forces considering nodal displacements is the tangent stiffness matrix. The analytical expressions having nodal displacements of matrixes forming the content of the 2D frame construction element tangent stiffness matrix are presented in the article. The suggested methodology has been checked making symbolical calculations in the medium of MatLAB calculation complex. The analytical expression of the stiffness matrix has been obtained.Article in Lithuanian

  17. Changing climate, changing frames

    International Nuclear Information System (INIS)

    Vink, Martinus J.; Boezeman, Daan; Dewulf, Art; Termeer, Catrien J.A.M.

    2013-01-01

    Highlights: ► We show development of flood policy frames in context of climate change attention. ► Rising attention on climate change influences traditional flood policy framing. ► The new framing employs global-scale scientific climate change knowledge. ► With declining attention, framing disregards climate change, using local knowledge. ► We conclude that frames function as sensemaking devices selectively using knowledge. -- Abstract: Water management and particularly flood defence have a long history of collective action in low-lying countries like the Netherlands. The uncertain but potentially severe impacts of the recent climate change issue (e.g. sea level rise, extreme river discharges, salinisation) amplify the wicked and controversial character of flood safety policy issues. Policy proposals in this area generally involve drastic infrastructural works and long-term investments. They face the difficult challenge of framing problems and solutions in a publicly acceptable manner in ever changing circumstances. In this paper, we analyse and compare (1) how three key policy proposals publicly frame the flood safety issue, (2) the knowledge referred to in the framing and (3) how these frames are rhetorically connected or disconnected as statements in a long-term conversation. We find that (1) framings of policy proposals differ in the way they depict the importance of climate change, the relevant timeframe and the appropriate governance mode; (2) knowledge is selectively mobilised to underpin the different frames and (3) the frames about these proposals position themselves against the background of the previous proposals through rhetorical connections and disconnections. Finally, we discuss how this analysis hints at the importance of processes of powering and puzzling that lead to particular framings towards the public at different historical junctures

  18. Framing Gangnam Style

    Directory of Open Access Journals (Sweden)

    Hyunsun Catherine Yoon

    2017-08-01

    Full Text Available This paper examines the way in which news about Gangnam Style was framed in the Korean press. First released on 15th July 2012, it became the first video to pass two billion views on YouTube. 400 news articles between July 2012 and March 2013 from two South Korean newspapers - Chosun Ilbo and Hankyoreh were analyzed using the frame analysis method in five categories: industry/economy, globalization, cultural interest, criticism, and competition. The right-left opinion cleavage is important because news frames interact with official discourses, audience frames and prior knowledge which consequently mediate effects on public opinion, policy debates, social movement and individual interpretations. Whilst the existing literature on Gangnam Style took rather holistic approach, this study aimed to fill the lacuna, considering this phenomenon as a dynamic process, by segmenting different stages - recognition, spread, peak and continuation. Both newspapers acknowledged Gangnam Style was an epochal event but their perspectives and news frames were different; globalization frame was most frequently used in Chosun Ilbo whereas cultural interest frame was most often used in Hankyoreh. Although more critical approaches were found in Hankyoreh, reflecting the right-left opinion cleavage, both papers lacked in critical appraisal and analysis of Gangnam Style’s reception in a broader context of the new Korean Wave.

  19. Nutrition Information In Community Newspapers: Goal Framing, Story Origins, and Topics.

    Science.gov (United States)

    Andsager, Julie L; Chen, Li; Miles, Stephanie; Smith, Christina C; Nothwehr, Faryle

    2015-01-01

    Obesity rates are high in the rural United States. Because small communities often have few health care practitioners, nutrition news in community newspapers may be a useful source of information. This content analysis of a random sample of 164 nutrition stories from 10 community newspapers in the rural West North Central Midwest was guided by concepts from goal-framing theory. Locally generated stories comprised nearly half of the sample, suggesting that nutrition is a salient topic in many rural communities. Hedonic frames related to food enjoyment were twice as frequent as health improvement frames. Results suggest food promotion was the most common topic of nutrition stories, with guidelines for a healthy diet appearing about half as often. Stories about a healthy diet and food promotion were most often written locally. Findings are discussed with recommendations for improvement of community news coverage of nutrition.

  20. Media ownership and news framing: an analysis of HIV/AIDS coverage by Ugandan press.

    Science.gov (United States)

    Kiwanuka-Tondo, James; Albada, Kelly F; Payton, Fay Cobb

    2012-12-01

    Applying framing theory, the present research analyzes trends in Ugandan news coverage and the prominent issue frames for HIV/AIDS-related stories. In order to determine the influence of other factors, such as media ownership and journalist origin, nearly 800 articles, from 2000 to 2004, were gathered from the major private newspaper and government-owned newspaper in Uganda. After systematic sampling, 365 articles constitute the sample. The results indicate that print news coverage of HIV and AIDS followed a non-linear trajectory, declining from 2000-2002 and then increasing from 2003-2004. Curative medicine emerged as the most prominent issue frame. Higher-risk behaviour was the least prominent issue frame overall. The 'solutions' issue frame nearly doubled in prominence from 2000-2004, while the HIV-prevention frame decreased from 2000-2002 and then rebounded from 2003-2004. Concerning HIV-related topics, the private newspaper included more features, printed lengthier articles, incorporated a greater variety of news frames, and published more articles by foreign journalists than the government-owned newspaper. The private newspaper employed the 'HIV-prevention,' 'action,' and 'victims' frames more often than the government-owned newspaper. Journalists at the government-owned newspaper adopted a 'solutions' frame more often than their private-press counterparts. Though foreign journalists were more likely than local journalists to employ the HIV-prevention frame, additional tests revealed that the news organisation for which the journalists worked contributed to issue framing to a greater extent than did either a local or foreign reporting origin. Local (Ugandan) journalists working for the two news organisations differed in their tendencies to apply the HIV-prevention, action, victims, and tragedy frames in news stories on HIV and AIDS, with journalists at the private newspaper using these frames more often than did journalists at the government-owned newspaper.

  1. Frames for undergraduates

    CERN Document Server

    Han, Deguang; Larson, David; Weber, Eric

    2007-01-01

    Frames for Undergraduates is an undergraduate-level introduction to the theory of frames in a Hilbert space. This book can serve as a text for a special-topics course in frame theory, but it could also be used to teach a second semester of linear algebra, using frames as an application of the theoretical concepts. It can also provide a complete and helpful resource for students doing undergraduate research projects using frames. The early chapters contain the topics from linear algebra that students need to know in order to read the rest of the book. The later chapters are devoted to advanced topics, which allow students with more experience to study more intricate types of frames. Toward that end, a Student Presentation section gives detailed proofs of fairly technical results with the intention that a student could work out these proofs independently and prepare a presentation to a class or research group. The authors have also presented some stories in the Anecdotes section about how this material has moti...

  2. Changing quantum reference frames

    OpenAIRE

    Palmer, Matthew C.; Girelli, Florian; Bartlett, Stephen D.

    2013-01-01

    We consider the process of changing reference frames in the case where the reference frames are quantum systems. We find that, as part of this process, decoherence is necessarily induced on any quantum system described relative to these frames. We explore this process with examples involving reference frames for phase and orientation. Quantifying the effect of changing quantum reference frames serves as a first step in developing a relativity principle for theories in which all objects includ...

  3. Bonobos and chimpanzees exhibit human-like framing effects

    Science.gov (United States)

    Krupenye, Christopher; Rosati, Alexandra G.; Hare, Brian

    2015-01-01

    Humans exhibit framing effects when making choices, appraising decisions involving losses differently from those involving gains. To directly test for the evolutionary origin of this bias, we examined decision-making in humans' closest living relatives: bonobos (Pan paniscus) and chimpanzees (Pan troglodytes). We presented the largest sample of non-humans to date (n = 40) with a simple task requiring minimal experience. Apes made choices between a ‘framed’ option that provided preferred food, and an alternative option that provided a constant amount of intermediately preferred food. In the gain condition, apes experienced a positive ‘gain’ event in which the framed option was initially presented as one piece of food but sometimes was augmented to two. In the loss condition, apes experienced a negative ‘loss' event in which they initially saw two pieces but sometimes received only one. Both conditions provided equal pay-offs, but apes chose the framed option more often in the positive ‘gain’ frame. Moreover, male apes were more susceptible to framing than were females. These results suggest that some human economic biases are shared through common descent with other apes and highlight the importance of comparative work in understanding the origins of individual differences in human choice. PMID:25672997

  4. On Framing

    DEFF Research Database (Denmark)

    Peder Pedersen, Claus

    2018-01-01

    On framing as artistic and conceptual tool in the works of Claudia Carbone. Contribution to exhibition at the Aarhus School of Architecture.......On framing as artistic and conceptual tool in the works of Claudia Carbone. Contribution to exhibition at the Aarhus School of Architecture....

  5. Media coverage of the Zika crisis in Brazil: The construction of a 'war' frame that masked social and gender inequalities.

    Science.gov (United States)

    Ribeiro, Barbara; Hartley, Sarah; Nerlich, Brigitte; Jaspal, Rusi

    2018-03-01

    Between 2015 and 2016, Zika became an epidemic of global concern and the focus of intense media coverage. Using a hybrid model of frame and social representations theory, we examine how the Zika outbreak was reported in two major newspapers in Brazil: O Globo and Folha de São Paulo. The analysis of 186 articles published between December 2015 and May 2016 reveals a dominant 'war' frame supported by two sub-frames: one focused on eradicating the vector (mosquito) and another on controlling microcephaly, placing the burden of prevention on women. Scientific uncertainties about the virus and its relationship to microcephaly coupled with political uncertainties in Brazil increased the power of the war frame. This frame gave prominence and legitimacy to certain representations of disease management during the crisis, masking social and gender inequalities. We show how the cartography of the disease overlaps with that of poverty and regional inequality in Brazil to argue that addressing socio-economic aspects is essential, but normally neglected, in media communications during disease outbreaks like Zika. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

  6. Moving beyond the function of the health behaviour: the effect of message frame on behavioural decision-making.

    Science.gov (United States)

    Bartels, Roger D; Kelly, Kristina M; Rothman, Alexander J

    2010-09-01

    Health messages that provide gain- or loss-framed arguments have a differential impact on behavioural decision-making (Rothman & Salovey, 1997). Typically, gain-framed messages more effectively promote preventive health behaviours, which maintain health and minimise the risk of a health problem, whereas loss-framed messages more effectively promote detection behaviours, which involve the risk of finding a health problem. Two experiments tested the thesis that the risk implications of the behaviour are an important determinant of the persuasive impact of gain- and loss-framed appeals. Results revealed that when the risk associated with a health behaviour (either a prevention behaviour in Experiment 1 or a detection behaviour in Experiment 2) was low, participants responded more favourably to gain-framed messages. However, when the risk associated with the health behaviour (either prevention or detection) was high, participants responded more favourably to loss-framed messages. Discussion focuses on the importance of taking into account how individuals construe a behaviour when constructing framed appeals.

  7. Physical Exposures, Work Tasks, and OSHA-10 Training Among Temporary and Payroll Construction Workers.

    Science.gov (United States)

    Caban-Martinez, Alberto J; Santiago, Katerina M; Stillman, Jordan; Moore, Kevin J; Sierra, Danielle A; Chalmers, Juanita; Baniak, Melissa; Jordan, Melissa M

    2018-04-01

    We characterize and compare the self-reported physical exposures, work tasks, and OSHA-10 training in a non-probabilistic sample of temporary and payroll construction workers. In June 2016, a total of 250 payroll and temporary general laborers employed at Florida construction sites completed a survey at the job site as part of the falls reported among minority employees (FRAME) study. Workers employed through temp agencies (57.1%) were significantly more likely to report moving or lifting materials more than 100 pounds than payroll workers (38.5%; P < 0.01). Temporary construction workers with 10-hour OSHA training (22.2%) spent significantly less time with intense hand use/awkward hand posture than temporary workers without 10-hour OSHA training (46.9%; P = 0.048). Temp construction workers with OSHA 10-hour training reported less hazardous physical postures than workers without the same training.

  8. Reusable frame greenhouse that saves money and erection time and reduces waste generation

    International Nuclear Information System (INIS)

    Greenhalgh, W.O.; Ott, D.T.

    1977-01-01

    An improved greenhouse design has been proposed and tested for use at the Hanford Engineering Development Laboratory for containing radioactive materials during decontamination, maintenance, and remodeling operations in nuclear facilities. The advantages of the greenhouse design include a reusable frame that is free standing and self-supporting and a plastic enclosure that is easily erected and attached to the frame. Manpower requirements appear to be about half that of the conventional greenhouse, the construction costs are approximately 20 to 40% lower, and the waste generated from the greenhouse is approximately 60% lower

  9. EXPERIMENTAL STUDY OF THE BEARING CAPACITY OF SPATIAL METAL FRAMES

    Directory of Open Access Journals (Sweden)

    Serpik Igor' Naftol'evich

    2012-10-01

    Full Text Available In the article, the authors describe the principal findings of the experimental study of destruction of spatial frames made of closed-profile steel rods. Six samples of frames were tested through the application of a kinematic loading scheme. Values of forces, displacements and deformations were measured over the time. Each sample was brought to the state when the load reached its maximal value. Thereafter, the load intensity was reduced to 0.6...0.7 of its maximal value. It was identified that the destruction of rods in the event of combined stress was similar to the formation of plastic hinges in the course of regular bending. In some cases, cracks were formed in the zones of plastic hinges. This process did not cause complete destruction of frames. Destruction-related conditions were also assessed by the quasi-rigidity method implemented in STARK ES 2009 software package. The input data were used to perform failure, bending and torsion tests of steel pipes. The experiments and calculations have proven that in this case the process of destruction can be considered in accordance with the limit equilibrium method by taking account of formation of spatial plastic hinges. The quasi-rigidity method can be employed to identify the maximal load that the frames can bear.

  10. National Figure Leadership Construction In The Movie "Ketika Bung Di Ende"

    OpenAIRE

    Septizar Triastika

    2016-01-01

    This research discusses Soekarno’s leadership construction as a national figure framed in the movie “Ketika Bung di Ende” as a film that raised the critical phase which rarely examined in the life of Soekarno. This study rests on the theory of Construction Reality Peter L. Berger and Thomas Luckman through movie as a mass media. Using the framing analysis of William A. Gamson and Andre Modgliani to see how the events are governed by the ideas and its problems, by using Metaphors, Catchphrases...

  11. Frame by Frame II: A Filmography of the African American Image, 1978-1994.

    Science.gov (United States)

    Klotman, Phyllis R.; Gibson, Gloria J.

    A reference guide on African American film professionals, this book is a companion volume to the earlier "Frame by Frame I." It focuses on giving credit to African Americans who have contributed their talents to a film industry that has scarcely recognized their contributions, building on the aforementioned "Frame by Frame I,"…

  12. Framing theory

    NARCIS (Netherlands)

    de Vreese, C.H.; Lecheler, S.; Mazzoleni, G.; Barnhurst, K.G.; Ikeda, K.; Maia, R.C.M.; Wessler, H.

    2016-01-01

    Political issues can be viewed from different perspectives and they can be defined differently in the news media by emphasizing some aspects and leaving others aside. This is at the core of news framing theory. Framing originates within sociology and psychology and has become one of the most used

  13. Framing politics

    NARCIS (Netherlands)

    Lecheler, S.K.

    2010-01-01

    This dissertation supplies a number of research findings that add to a theory of news framing effects, and also to the understanding of the role media effects play in political communication. We show that researchers must think more about what actually constitutes a framing effect, and that a

  14. Serialising languages: Satellite-framed, verb-framed or neither ...

    African Journals Online (AJOL)

    The diversity in the coding of the core schema of motion, i.e., Path, has led to a traditional typology of languages into verb-framed and satellite-framed languages. In the former Path is encoded in verbs and in the latter it is encoded in non-verb elements that function as sisters to co-event expressing verbs such as manner ...

  15. State-of-the-Art Highly Insulating Window Frames - Research and Market Review

    Energy Technology Data Exchange (ETDEWEB)

    Gustavsen, Arild; Jelle, Bjorn Petter; Arasteh, Dariush; Kohler, Christian

    2007-01-01

    This document reports the findings of a market and research review related to state-of-the-art highly insulating window frames. The market review focuses on window frames that satisfy the Passivhaus requirements (window U-value less or equal to 0.8 W/m{sup 2}K ), while other examples are also given in order to show the variety of materials and solutions that may be used for constructing window frames with a low thermal transmittance (U-value). The market search shows that several combinations of materials are used in order to obtain window frames with a low U-value. The most common insulating material seems to be Polyurethane (PUR), which is used together with most of the common structural materials such as wood, aluminum, and PVC. The frame research review also shows examples of window frames developed in order to increase the energy efficiency of the frames and the glazings which the frames are to be used together with. The authors find that two main tracks are used in searching for better solutions. The first one is to minimize the heat losses through the frame itself. The result is that conductive materials are replaced by highly thermal insulating materials and air cavities. The other option is to reduce the window frame area to a minimum, which is done by focusing on the net energy gain by the entire window (frame, spacer and glazing). Literature shows that a window with a higher U-value may give a net energy gain to a building that is higher than a window with a smaller U-value. The net energy gain is calculated by subtracting the transmission losses through the window from the solar energy passing through the windows. The net energy gain depends on frame versus glazing area, solar factor, solar irradiance, calculation period and U-value. The frame research review also discusses heat transfer modeling issues related to window frames. Thermal performance increasing measures, surface modeling, and frame cavity modeling are among the topics discussed. The

  16. Construction of Escherichia coli K-12 in-frame, single-gene knockout mutants: the Keio collection.

    Science.gov (United States)

    Baba, Tomoya; Ara, Takeshi; Hasegawa, Miki; Takai, Yuki; Okumura, Yoshiko; Baba, Miki; Datsenko, Kirill A; Tomita, Masaru; Wanner, Barry L; Mori, Hirotada

    2006-01-01

    We have systematically made a set of precisely defined, single-gene deletions of all nonessential genes in Escherichia coli K-12. Open-reading frame coding regions were replaced with a kanamycin cassette flanked by FLP recognition target sites by using a one-step method for inactivation of chromosomal genes and primers designed to create in-frame deletions upon excision of the resistance cassette. Of 4288 genes targeted, mutants were obtained for 3985. To alleviate problems encountered in high-throughput studies, two independent mutants were saved for every deleted gene. These mutants-the 'Keio collection'-provide a new resource not only for systematic analyses of unknown gene functions and gene regulatory networks but also for genome-wide testing of mutational effects in a common strain background, E. coli K-12 BW25113. We were unable to disrupt 303 genes, including 37 of unknown function, which are candidates for essential genes. Distribution is being handled via GenoBase (http://ecoli.aist-nara.ac.jp/).

  17. Sparse Matrices in Frame Theory

    DEFF Research Database (Denmark)

    Lemvig, Jakob; Krahmer, Felix; Kutyniok, Gitta

    2014-01-01

    Frame theory is closely intertwined with signal processing through a canon of methodologies for the analysis of signals using (redundant) linear measurements. The canonical dual frame associated with a frame provides a means for reconstruction by a least squares approach, but other dual frames...... yield alternative reconstruction procedures. The novel paradigm of sparsity has recently entered the area of frame theory in various ways. Of those different sparsity perspectives, we will focus on the situations where frames and (not necessarily canonical) dual frames can be written as sparse matrices...

  18. Effects of Message Framing on Influenza Vaccination: Understanding the Role of Risk Disclosure, Perceived Vaccine Efficacy, and Felt Ambivalence.

    Science.gov (United States)

    Kim, Sungsu; Pjesivac, Ivanka; Jin, Yan

    2017-10-20

    The current study examined the effects of framing in promotional health messages on intention to vaccinate against seasonal influenza virus. The findings of an experimental study (N = 86) indicated that exposure to both benefits and side effects of vaccination (gain-framed with risk disclosure message) led to lower intention to receive the flu vaccine. This relationship was mediated by both perceived vaccine efficacy and felt ambivalence in a serial order, revealing the underlying psychological mechanisms important for understanding health-related behaviors. Theoretical implications of constructing sub-framed messages are discussed and the concept of second-order framing is introduced.

  19. Exploring Technostress: Results of a Large Sample Factor Analysis

    Directory of Open Access Journals (Sweden)

    Steponas Jonušauskas

    2016-06-01

    Full Text Available With reference to the results of a large sample factor analysis, the article aims to propose the frame examining technostress in a population. The survey and principal component analysis of the sample consisting of 1013 individuals who use ICT in their everyday work was implemented in the research. 13 factors combine 68 questions and explain 59.13 per cent of the answers dispersion. Based on the factor analysis, questionnaire was reframed and prepared to reasonably analyze the respondents’ answers, revealing technostress causes and consequences as well as technostress prevalence in the population in a statistically validated pattern. A key elements of technostress based on factor analysis can serve for the construction of technostress measurement scales in further research.

  20. A low temperature scanning force microscope for biological samples

    Energy Technology Data Exchange (ETDEWEB)

    Gustafsson, Mats Gustaf Lennart [Univ. of California, Berkeley, CA (United States)

    1993-05-01

    An SFM has been constructed capable of operating at 143 K. Two contributions to SFM technology are described: a new method of fabricating tips, and new designs of SFM springs that significantly lower the noise level. The SFM has been used to image several biological samples (including collagen, ferritin, RNA, purple membrane) at 143 K and room temperature. No improvement in resolution resulted from 143 K operation; several possible reasons for this are discussed. Possibly sharper tips may help. The 143 K SFM will allow the study of new categories of samples, such as those prepared by freeze-frame, single molecules (temperature dependence of mechanical properties), etc. The SFM was used to cut single collagen molecules into segments with a precision of {le} 10 nm.

  1. Sampling Assumptions Affect Use of Indirect Negative Evidence in Language Learning.

    Directory of Open Access Journals (Sweden)

    Anne Hsu

    Full Text Available A classic debate in cognitive science revolves around understanding how children learn complex linguistic patterns, such as restrictions on verb alternations and contractions, without negative evidence. Recently, probabilistic models of language learning have been applied to this problem, framing it as a statistical inference from a random sample of sentences. These probabilistic models predict that learners should be sensitive to the way in which sentences are sampled. There are two main types of sampling assumptions that can operate in language learning: strong and weak sampling. Strong sampling, as assumed by probabilistic models, assumes the learning input is drawn from a distribution of grammatical samples from the underlying language and aims to learn this distribution. Thus, under strong sampling, the absence of a sentence construction from the input provides evidence that it has low or zero probability of grammaticality. Weak sampling does not make assumptions about the distribution from which the input is drawn, and thus the absence of a construction from the input as not used as evidence of its ungrammaticality. We demonstrate in a series of artificial language learning experiments that adults can produce behavior consistent with both sets of sampling assumptions, depending on how the learning problem is presented. These results suggest that people use information about the way in which linguistic input is sampled to guide their learning.

  2. Sampling Assumptions Affect Use of Indirect Negative Evidence in Language Learning

    Science.gov (United States)

    2016-01-01

    A classic debate in cognitive science revolves around understanding how children learn complex linguistic patterns, such as restrictions on verb alternations and contractions, without negative evidence. Recently, probabilistic models of language learning have been applied to this problem, framing it as a statistical inference from a random sample of sentences. These probabilistic models predict that learners should be sensitive to the way in which sentences are sampled. There are two main types of sampling assumptions that can operate in language learning: strong and weak sampling. Strong sampling, as assumed by probabilistic models, assumes the learning input is drawn from a distribution of grammatical samples from the underlying language and aims to learn this distribution. Thus, under strong sampling, the absence of a sentence construction from the input provides evidence that it has low or zero probability of grammaticality. Weak sampling does not make assumptions about the distribution from which the input is drawn, and thus the absence of a construction from the input as not used as evidence of its ungrammaticality. We demonstrate in a series of artificial language learning experiments that adults can produce behavior consistent with both sets of sampling assumptions, depending on how the learning problem is presented. These results suggest that people use information about the way in which linguistic input is sampled to guide their learning. PMID:27310576

  3. When message-frame fits salient cultural-frame, messages feel more persuasive.

    Science.gov (United States)

    Uskul, Ayse K; Oyserman, Daphna

    2010-03-01

    The present study examines the persuasive effects of tailored health messages comparing those tailored to match (versus not match) both chronic cultural frame and momentarily salient cultural frame. Evidence from two studies (Study 1: n = 72 European Americans; Study 2: n = 48 Asian Americans) supports the hypothesis that message persuasiveness increases when chronic cultural frame, health message tailoring and momentarily salient cultural frame all match. The hypothesis was tested using a message about health risks of caffeine consumption among individuals prescreened to be regular caffeine consumers. After being primed for individualism, European Americans who read a health message that focused on the personal self were more likely to accept the message-they found it more persuasive, believed they were more at risk and engaged in more message-congruent behaviour. These effects were also found among Asian Americans who were primed for collectivism and who read a health message that focused on relational obligations. The findings point to the importance of investigating the role of situational cues in persuasive effects of health messages and suggest that matching content to primed frame consistent with the chronic frame may be a way to know what to match messages to.

  4. Overall properties of the Gaia DR1 reference frame

    Science.gov (United States)

    Liu, N.; Zhu, Z.; Liu, J.-C.; Ding, C.-Y.

    2017-03-01

    Aims: The first Gaia data release (Gaia DR1) provides 2191 ICRF2 sources with their positions in the auxiliary quasar solution and five astrometric parameters - positions, parallaxes, and proper motions - for stars in common between the Tycho-2 catalogue and Gaia in the joint Tycho-Gaia astrometric solution (TGAS). We aim to analyze the overall properties of Gaia DR1 reference frame. Methods: We compare quasar positions of the auxiliary quasar solution with ICRF2 sources using different samples and evaluate the influence on the Gaia DR1 reference frame owing to the Galactic aberration effect over the J2000.0-J2015.0 period. Then we estimate the global rotation between TGAS with Tycho-2 proper motion systems to investigate the property of the Gaia DR1 reference frame. Finally, the Galactic kinematics analysis using the K-M giant proper motions is performed to understand the property of Gaia DR1 reference frame. Results: The positional comparison between the auxiliary quasar solution and ICRF2 shows negligible orientation and validates the declination bias of -0.1mas in Gaia quasar positions with respect to ICRF2. Galactic aberration effect is thought to cause an offset 0.01mas of the Z axis direction of Gaia DR1 reference frame. The global rotation between TGAS and Tycho-2 proper motion systems, obtained by different samples, shows a much smaller value than the claimed value 0.24mas yr-1. For the Galactic kinematics analysis of the TGAS K-M giants, we find possible non-zero Galactic rotation components beyond the classical Oort constants: the rigid part ωYG = -0.38±0.15mas yr-1 and the differential part ω^primeYG = -0.29±0.19mas yr-1 around the YG axis of Galactic coordinates, which indicates possible residual rotation in Gaia DR1 reference frame or problems in the current Galactic kinematical model. Conclusions: The Gaia DR1 reference frame is well aligned to ICRF2, and the possible influence of the Galactic aberration effect should be taken into consideration

  5. The Influence of Framing on Risky Decisions: A Meta-analysis.

    Science.gov (United States)

    Kühberger

    1998-07-01

    In framing studies, logically equivalent choice situations are differently described and the resulting preferences are studied. A meta-analysis of framing effects is presented for risky choice problems which are framed either as gains or as losses. This evaluates the finding that highlighting the positive aspects of formally identical problems does lead to risk aversion and that highlighting their equivalent negative aspects does lead to risk seeking. Based on a data pool of 136 empirical papers that reported framing experiments with nearly 30,000 participants, we calculated 230 effect sizes. Results show that the overall framing effect between conditions is of small to moderate size and that profound differences exist between research designs. Potentially relevant characteristics were coded for each study. The most important characteristics were whether framing is manipulated by changing reference points or by manipulating outcome salience, and response mode (choice vs. rating/judgment). Further important characteristics were whether options differ qualitatively or quantitatively in risk, whether there is one or multiple risky events, whether framing is manipulated by gain/loss or by task-responsive wording, whether dependent variables are measured between- or within- subjects, and problem domains. Sample (students vs. target populations) and unit of analysis (individual vs. group) was not influential. It is concluded that framing is a reliable phenomenon, but that outcome salience manipulations, which constitute a considerable amount of work, have to be distinguished from reference point manipulations and that procedural features of experimental settings have a considerable effect on effect sizes in framing experiments. Copyright 1998 Academic Press.

  6. A Method of Sample Models of Program Construction in Terms of Petri Nets

    Directory of Open Access Journals (Sweden)

    D. I. Kharitonov

    2015-01-01

    Full Text Available In the article a method of automated construction of Petri nets simulating the behaviour of imperative programs is considered from the formal point of view. Petri net samples with certain characteristics are necessary in programming new algorithms for program analysis; in particular, they can be used for developing or optimizing algorithms of Petri nets compositions and decompositions, building the reachability tree, checking invariants and so on. The generation process consists of two stages. At the first stage, construction templates for a resulting net and parameters for construction are described. With the help of these parameters it is possible to regulate the final size and the absolute or relative amount of certain structures in the resulting net. At the second stage, iterative process of automated net construction is used for Petri net generation of any size, limited only by an available computer memory. In the first section of the article the minimum necessary definitions are given and a new version of Petri nets composition operation by places is introduced. Commutative and associative properties of introduced binary operation allow to synchronize any number of Petri nets in arbitrary order. Then construction template is defined as a marked Petri net with input and output interfaces and rules for templates composition using this interfaces. A number of construction templates can be united in a collection, for which the evolution rules are defined. The completeness property of a collection guarantees that the collection evolution results in a Petri net that simulates the imperative program behavior. The article provides a version of the construction templates complete collection and an example of Petri net simulating sequential imperative program construction.

  7. Einstein and Jordan frames reconciled: A frame-invariant approach to scalar-tensor cosmology

    International Nuclear Information System (INIS)

    Catena, Riccardo; Pietroni, Massimo; Scarabello, Luca

    2007-01-01

    Scalar-tensor theories of gravity can be formulated in different frames, most notably, the Einstein and the Jordan one. While some debate still persists in the literature on the physical status of the different frames, a frame transformation in scalar-tensor theories amounts to a local redefinition of the metric, and then should not affect physical results. We analyze the issue in a cosmological context. In particular, we define all the relevant observables (redshift, distances, cross sections, ...) in terms of frame-independent quantities. Then, we give a frame-independent formulation of the Boltzmann equation, and outline its use in relevant examples such as particle freeze-out and the evolution of the cosmic microwave background photon distribution function. Finally, we derive the gravitational equations for the frame-independent quantities at first order in perturbation theory. From a practical point of view, the present approach allows the simultaneous implementation of the good aspects of the two frames in a clear and straightforward way

  8. Approach/avoidance motivation, message framing and skin cancer prevention: a test of the congruency hypothesis.

    Science.gov (United States)

    Hevey, David; Dolan, Michelle

    2014-08-01

    The congruency hypothesis posits that approach-orientated individuals are persuaded to engage in prevention behaviours by positively framed messages; conversely, negatively framed messages are more persuasive in encouraging those who are avoidance-orientated. A 2 (frame: loss vs gain) × 2 (motivation: avoidance vs approach) design examined the effects of skin cancer information on sun-protective intentions and free sunscreen sample requests among 533 young adults. Gain-framed messages had the strongest effect on sun-protective intentions for approach-oriented individuals, whereas loss-framed messages had the strongest effect on avoidance-oriented individuals. Message framing effects on precautionary sun behaviour intentions were moderated by motivational differences. © The Author(s) 2013.

  9. column frame for design of reinforced concrete sway frames

    African Journals Online (AJOL)

    adminstrator

    design of slender reinforced concrete columns in sway frames according .... concrete,. Ac = gross cross-sectional area of the columns. Step 3: Effective Buckling Length Factors. The effective buckling length factors of columns in a sway frame shall be computed by .... shall have adequate resistance to failure in a sway mode ...

  10. Framing Performance Magic: The Role of Contract, Discourse and Effect

    Directory of Open Access Journals (Sweden)

    Landman, Todd

    2013-10-01

    Full Text Available A wide continuum of genres in performance magic has developed since the Victorian period, including stage magic, street magic, close-up magic, comedy magic, mentalism, bizarre and mystery entertainment. Each of these genres frames its performance on a different contract between the performer and the audience, the discourse used during performance and the effect on the audience both in terms of its perception of what has transpired and the personal meaning attached to the effect. This article examines this interplay between contract, discourse and effect in theory and practice. The article constructs a typology of performance magic which is then explored through an examination of audience perception and feedback from a drama workshop and focus group conducted at the University of Huddersfield in October 2012. The group experienced three performances framed around the idea of the magician, the mentalist, and the mystic, and the ensuing discussion revealed a wide range of insights into these different framings of performance. The reactions and ensuing discussions involved different understandings of trust, plausibility, explanation, authority, and dynamic interaction.

  11. MODAL ANALYSIS OF REAL TIMBER FRAME HOUSES WITH DIFFERENT INSULATION MATERIALS

    Directory of Open Access Journals (Sweden)

    Marcin Szczepański

    2016-09-01

    Full Text Available The aim of this article is to present the results of a numerical modal analysis of two actual structures of timber frame buildings and the different behaviour due to the used insulation material. One model of the timber structure was filled with mineral wool, while the other with polyurethane foam. During the modal analysis, eigenvalues for both models have been determined. The results of the analysis clearly show the increase of stiffness and damping properties of skeletal constructions achieved by the use of polyurethane foam as the skeleton filling. The numerical model was based on prior experimental test on real scale single frame elements, therefore the result can be assumed to be adequate.

  12. Making Molecular Movies: 10,000,000,000,000 Frames per Second

    International Nuclear Information System (INIS)

    Gaffney, Kelly

    2006-01-01

    Movies have transformed our perception of the world. With slow motion photography, we can see a hummingbird flap its wings, and a bullet pierce an apple. The remarkably small and extremely fast molecular world that determines how your body functions cannot be captured with even the most sophisticated movie camera today. To see chemistry in real time requires a camera capable of seeing molecules that are one ten billionth of a foot with a frame rate of 10 trillion frames per second. SLAC has embarked on the construction of just such a camera. Please join me as I discuss how this molecular movie camera will work and how it will change our perception of the molecular world.

  13. SamplingStrata: An R Package for the Optimization of Strati?ed Sampling

    Directory of Open Access Journals (Sweden)

    Giulio Barcaroli

    2014-11-01

    Full Text Available When designing a sampling survey, usually constraints are set on the desired precision levels regarding one or more target estimates (the Ys. If a sampling frame is available, containing auxiliary information related to each unit (the Xs, it is possible to adopt a stratified sample design. For any given strati?cation of the frame, in the multivariate case it is possible to solve the problem of the best allocation of units in strata, by minimizing a cost function sub ject to precision constraints (or, conversely, by maximizing the precision of the estimates under a given budget. The problem is to determine the best stratification in the frame, i.e., the one that ensures the overall minimal cost of the sample necessary to satisfy precision constraints. The Xs can be categorical or continuous; continuous ones can be transformed into categorical ones. The most detailed strati?cation is given by the Cartesian product of the Xs (the atomic strata. A way to determine the best stratification is to explore exhaustively the set of all possible partitions derivable by the set of atomic strata, evaluating each one by calculating the corresponding cost in terms of the sample required to satisfy precision constraints. This is una?ordable in practical situations, where the dimension of the space of the partitions can be very high. Another possible way is to explore the space of partitions with an algorithm that is particularly suitable in such situations: the genetic algorithm. The R package SamplingStrata, based on the use of a genetic algorithm, allows to determine the best strati?cation for a population frame, i.e., the one that ensures the minimum sample cost necessary to satisfy precision constraints, in a multivariate and multi-domain case.

  14. The positive and negative framing of affirmative action: a group dominance perspective.

    Science.gov (United States)

    Haley, Hillary; Sidanius, Jim

    2006-05-01

    Using a sample of 328 White, Latino, and Black Los Angeles County adults, the authors examined the tendency to employ various affirmative action "frames" (e.g., affirmative action as a "tie-breaking" device or as a quota-based policy). All three groups agreed about which frames cast affirmative action in a positive light and which cast it in a negative light. Although minorities had a tendency to frame affirmative action in terms that most people find morally acceptable, Whites had a tendency to frame affirmative action in terms most people find unacceptable. In addition, compared to minorities, Whites were less supportive of affirmative action regardless of how it was framed. LISREL modeling also was employed to test two competing models regarding predictors of the tendency to use frames that one personally finds to be relatively negative versus positive. Consistent with the expectations of social dominance theory and a motivated cognition perspective, the authors found that social dominance orientation (SDO) had significant net direct and indirect effects on one's framing of affirmative action.

  15. Weaving Hilbert space fusion frames

    OpenAIRE

    Neyshaburi, Fahimeh Arabyani; Arefijamaal, Ali Akbar

    2018-01-01

    A new notion in frame theory, so called weaving frames has been recently introduced to deal with some problems in signal processing and wireless sensor networks. Also, fusion frames are an important extension of frames, used in many areas especially for wireless sensor networks. In this paper, we survey the notion of weaving Hilbert space fusion frames. This concept can be had potential applications in wireless sensor networks which require distributed processing using different fusion frames...

  16. Ultra-fast framing camera tube

    Science.gov (United States)

    Kalibjian, Ralph

    1981-01-01

    An electronic framing camera tube features focal plane image dissection and synchronized restoration of the dissected electron line images to form two-dimensional framed images. Ultra-fast framing is performed by first streaking a two-dimensional electron image across a narrow slit, thereby dissecting the two-dimensional electron image into sequential electron line images. The dissected electron line images are then restored into a framed image by a restorer deflector operated synchronously with the dissector deflector. The number of framed images on the tube's viewing screen is equal to the number of dissecting slits in the tube. The distinguishing features of this ultra-fast framing camera tube are the focal plane dissecting slits, and the synchronously-operated restorer deflector which restores the dissected electron line images into a two-dimensional framed image. The framing camera tube can produce image frames having high spatial resolution of optical events in the sub-100 picosecond range.

  17. Demonstration of energy-saving construction works; Shoshigenka wo mezashita kenchiku koji no jissho kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Kobayashi, T.; Yamagishi, M.; Kakimi, S. [Chubu Electric Power Co. Inc., Nagoya (Japan)

    1997-11-01

    Studies are conducted to promote energy-saving in construction works as part of environment protection programs. The first phase is for survey and analysis works for energy-saving in the current building design and construction works, and for processes, procedures and materials in model works (construction of sub-stations). The second phase is for studying energy-saving designs, materials and procedures, which are applied to model works, to assess their energy-saving effects , costs and applicability. The horizontally developed samples are prepared for the future development, based on the `continuous improvement of environment-management systems by establishing the PDCA cycles,` which is one of the basic requirements of the ISO14001 (environment management system). These efforts have reduced CO2 emissions associated with the manufacture of construction materials by 20%, mixed wastes by 45%, and plywood frame requirement by 70%. It is also confirmed that they can be realized at only around 3% higher cost. 9 refs., 10 figs., 3 tabs.

  18. Time delay control of power converters: Mixed frame and stationary-frame variants

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Loh, P.C.; Tang, Y.

    2008-01-01

    In this paper, a mixed-frame and a stationary-frame time delay current controller are proposed for high precision reference tracking and disturbance rejection of power converters. In particular, the controllers use a proportional-resonant regulator in the stationary frame for regulating...... the positive and negative-sequence fundamental currents, which are known to directly influence the flow of active and reactive power in most energy conversion systems. Moreover, for the tracking or compensation of harmonics, the controllers include a time delay control path in either the synchronous...... or stationary frame, whose inherent feedback and feedforward structure can be proven to resemble a bank of resonant filters in either reference frames. Unlike other existing controllers, the proposed time delay controllers function by introducing multiple resonant peaks at only those harmonic frequencies...

  19. Exploring the interplay between Framing and Securitization theory: the case of the Arab Spring protests in Bahrain

    Directory of Open Access Journals (Sweden)

    Vânia Carvalho Pinto

    2014-01-01

    Full Text Available This article advances the theoretical integration between securitization theory and the framing approach, resulting in a set of criteria hereby called security framing. It seeks to make a twofold contribution: to sharpen the study of the ideational elements that underlie the construction of threats, and to advance towards a greater assessment of the audience's preferences. The case study under examination is the 2011 military intervention of the countries of the Gulf Cooperation Council in Bahrain. The security framing of this case will help illuminate the dynamics at play in one of the most important recent events in Gulf politics.

  20. Framing effects in medical situations: distinctions of attribute, goal and risky choice frames.

    Science.gov (United States)

    Peng, Jiaxi; Jiang, Yuan; Miao, Danmin; Li, Rui; Xiao, Wei

    2013-06-01

    To verify whether three different framing effects (risky choice, attribute and goal) exist in simulated medical situations and to analyse any differences. Medical decision-making problems were established, relating to medical skill evaluation, patient compliance and a selection of treatment options. All problems were described in positive and negative frame conditions. Significantly more positive evaluations were made if the doctor's medical records were described as 'of 100 patients, 70 patients became better' compared with those described as 'of 100 patients, 30 patients didn't become better'. Doctor's advice described in a negative frame resulted in significantly more decisions to comply, compared with advice described in a positive frame. Treatment options described in terms of survival rates resulted in significantly more adventurous choices compared with options described in terms of mortality rates. Decision-making reversal appeared in the risky choice and attribute frames, but not the goal frame. Framing effects were shown to exist in simulated medical situations, but there were significant differences among the three kinds of such effects.

  1. Passive solar construction handbook

    Energy Technology Data Exchange (ETDEWEB)

    Levy, E.; Evans, D.; Gardstein, C.

    1981-08-01

    Many of the basic elements of passive solar design are reviewed. The unique design constraints presented in passive homes are introduced and many of the salient issues influencing design decisions are described briefly. Passive solar construction is described for each passive system type: direct gain, thermal storage wall, attached sunspace, thermal storage roof, and convective loop. For each system type, important design and construction issues are discussed and case studies illustrating designed and built examples of the system type are presented. Construction details are given and construction and thermal performance information is given for the materials used in collector components, storage components, and control components. Included are glazing materials, framing systems, caulking and sealants, concrete masonry, concrete, brick, shading, reflectors, and insulators. The Load Collector Ratio method for estimating passive system performance is appended, and other analysis methods are briefly summarized. (LEW)

  2. Ship construction and welding

    CERN Document Server

    Mandal, Nisith R

    2017-01-01

    This book addresses various aspects of ship construction, from ship types and construction materials, to welding technologies and accuracy control. The contents of the book are logically organized and divided into twenty-one chapters. The book covers structural arrangement with longitudinal and transverse framing systems based on the service load, and explains basic structural elements like hatch side girders, hatch end beams, stringers, etc. along with structural subassemblies like floors, bulkheads, inner bottom, decks and shells. It presents in detail double bottom construction, wing tanks & duct keels, fore & aft end structures, etc., together with necessary illustrations. The midship sections of various ship types are introduced, together with structural continuity and alignment in ship structures. With regard to construction materials, the book discusses steel, aluminum alloys and fiber reinforced composites. Various methods of steel material preparation are discussed, and plate cutting and form...

  3. 100-ps framing-camera tube

    International Nuclear Information System (INIS)

    Kalibjian, R.

    1978-01-01

    The optoelectronic framing-camera tube described is capable of recording two-dimensional image frames with high spatial resolution in the <100-ps range. Framing is performed by streaking a two-dimensional electron image across narrow slits. The resulting dissected electron line images from the slits are restored into framed images by a restorer deflector operating synchronously with the dissector deflector. The number of framed images on the tube's viewing screen equals the number of dissecting slits in the tube. Performance has been demonstrated in a prototype tube by recording 135-ps-duration framed images of 2.5-mm patterns at the cathode. The limitation in the framing speed is in the external drivers for the deflectors and not in the tube design characteristics. Faster frame speeds in the <100-ps range can be obtained by use of faster deflection drivers

  4. Location of frame overlap choppers on pulsed source instruments

    International Nuclear Information System (INIS)

    Narehood, D.G.; Pearce, J.V.; Sokol, P.E.

    2002-01-01

    A detailed study has been performed to investigate the effect of frame overlap in a cold neutron chopper spectrometer. The basic spectrometer is defined by two high-speed choppers, one near the moderator to shape the pulse from the moderator, and one near the sample to define energy resolution. Using ray-tracing timing diagrams, we have observed that there are regions along the guide where the trajectories of neutrons with different velocities converge temporally at characteristic points along the spectrometer. At these points of convergence, a frame overlap chopper would be totally ineffective, allowing neutrons of all velocities to pass through. Conversely, at points where trajectories of different velocity neutrons are divergent, a frame overlap chopper is most effective. An analytical model to describe this behaviour has been developed, and leads us to the counterintuitive conclusion that the optimum position for a frame overlap chopper is as close to the initial chopper as possible. We further demonstrate that detailed Monte Carlo simulations produce results which are consistent with this model

  5. STRESS-DEFORMED STATE OF A STRUT-FRAMED CRANE GIRDER

    Directory of Open Access Journals (Sweden)

    Kh. M. Muselemov

    2017-01-01

    Full Text Available Objectives. The aim of the present work is to study the influence of design parameters on the stress-deformed state of a sprengel crane girder; to compile the tables and corresponding graphs illustrating changes in internal force factors in the characteristic cross-sections of the system elements under consideration. The article describes the study of the stress-deformed state (SDS of a metal strut-framed crane girder.Methods. Numerical methods of analysis based on the use of the Green's function are used during solving this problem. A dimensionless parameter is introduced, depending on which the tables and graphs are constructed. According to the known algorithm, the calculations of internal force factors in the sections of the considered construction are performed.Results. Depending on the dimensionless parameter characterising the geometry and physical features of the system, tables of bending moments and transverse forces are compiled. According to these tables, the appropriate graphs are plotted in order to choose easily the optimal design parameters.Conclusion. The dependence of the moments and transverse forces on the dimensionless parameter k was found, the corresponding graphs were plotted and the metal costs for the girders were calculated. The minimum values of the moments and transverse forces are established to take place when the dimensionless parameter k values are close to zero. The most economical was a strut-framed crane girder having k = 0.0001. The most uneconomical had k = 0.05 and k =∞. Eventually, the sprengel girders were found to be more profitable as compared to conventional crane girders. In the examples considered in the article, the metal savings amounted up to 14%. The presented methodology allows the calculation and designing of strut-framed crane girders with two racks to be carried out. 

  6. Design optimization of cold-formed steel portal frames taking into account the effect of building topology

    Science.gov (United States)

    Phan, Duoc T.; Lim, James B. P.; Sha, Wei; Siew, Calvin Y. M.; Tanyimboh, Tiku T.; Issa, Honar K.; Mohammad, Fouad A.

    2013-04-01

    Cold-formed steel portal frames are a popular form of construction for low-rise commercial, light industrial and agricultural buildings with spans of up to 20 m. In this article, a real-coded genetic algorithm is described that is used to minimize the cost of the main frame of such buildings. The key decision variables considered in this proposed algorithm consist of both the spacing and pitch of the frame as continuous variables, as well as the discrete section sizes. A routine taking the structural analysis and frame design for cold-formed steel sections is embedded into a genetic algorithm. The results show that the real-coded genetic algorithm handles effectively the mixture of design variables, with high robustness and consistency in achieving the optimum solution. All wind load combinations according to Australian code are considered in this research. Results for frames with knee braces are also included, for which the optimization achieved even larger savings in cost.

  7. Conformal frame dependence of inflation

    International Nuclear Information System (INIS)

    Domènech, Guillem; Sasaki, Misao

    2015-01-01

    Physical equivalence between different conformal frames in scalar-tensor theory of gravity is a known fact. However, assuming that matter minimally couples to the metric of a particular frame, which we call the matter Jordan frame, the matter point of view of the universe may vary from frame to frame. Thus, there is a clear distinction between gravitational sector (curvature and scalar field) and matter sector. In this paper, focusing on a simple power-law inflation model in the Einstein frame, two examples are considered; a super-inflationary and a bouncing universe Jordan frames. Then we consider a spectator curvaton minimally coupled to a Jordan frame, and compute its contribution to the curvature perturbation power spectrum. In these specific examples, we find a blue tilt at short scales for the super-inflationary case, and a blue tilt at large scales for the bouncing case

  8. Conformal frame dependence of inflation

    Energy Technology Data Exchange (ETDEWEB)

    Domènech, Guillem; Sasaki, Misao, E-mail: guillem.domenech@yukawa.kyoto-u.ac.jp, E-mail: misao@yukawa.kyoto-u.ac.jp [Yukawa Institute for Theoretical Physics, Kyoto University, Kyoto 606-8502 (Japan)

    2015-04-01

    Physical equivalence between different conformal frames in scalar-tensor theory of gravity is a known fact. However, assuming that matter minimally couples to the metric of a particular frame, which we call the matter Jordan frame, the matter point of view of the universe may vary from frame to frame. Thus, there is a clear distinction between gravitational sector (curvature and scalar field) and matter sector. In this paper, focusing on a simple power-law inflation model in the Einstein frame, two examples are considered; a super-inflationary and a bouncing universe Jordan frames. Then we consider a spectator curvaton minimally coupled to a Jordan frame, and compute its contribution to the curvature perturbation power spectrum. In these specific examples, we find a blue tilt at short scales for the super-inflationary case, and a blue tilt at large scales for the bouncing case.

  9. Impacts of an Innovative Residential Construction Method on Internal Conditions

    Directory of Open Access Journals (Sweden)

    Roger Birchmore

    2015-02-01

    Full Text Available New Zealand houses are known for producing sub-optimal internal thermal conditions and unacceptably high internal moisture levels. These contribute to poor levels of health, mould and can coincide with the decay of structural timber frames. A proposed solution is to provide an alternative structure utilising plywood, a vapour check on the internal face of the timber frame and an additional air gap, followed by the internal lining. The internal vapour check is designed to prevent moisture vapour diffusion from inside into the frame and to permit moisture diffusion from outside through the structure to the internal environment. Two full scale houses had temperatures, dew points and humidity levels monitored in passive, unoccupied conditions. The test case house incorporated the innovative construction solution. The control house was of identical design and location, using standard construction practice. The calculated internal moisture content profile appeared to be unrelated to the external moisture content as expected, instead following the profile of the changing internal temperature. Whilst the innovative construction appeared to prevent moisture diffusion into the structure in winter and permit it inside in summer, this resulted in a generally higher internal relative humidity than the control house.

  10. Experimental Investigation of the Shear Resistance of Steel Frames with Precast Concrete Infill Panels

    NARCIS (Netherlands)

    Hoenderkamp, J.C.D.; Hofmeyer, H.; Snijder, H.H.

    2010-01-01

    At the Technische Universiteit Eindhoven a research program on composite construction is underway aiming at the development of design rules for steel frames with discretely connected precast concrete infill panels subject to in-plane horizontal loading. This paper presents experimental and finite

  11. Making students' frames explicit

    DEFF Research Database (Denmark)

    Nielsen, Louise Møller; Hansen, Poul Henrik Kyvsgaard

    2016-01-01

    Framing is a vital part of the design and innovation process. Frames are cognitive shortcuts (i.e. metaphors) that enable designers to connect insights about i.e. market opportunities and users needs with a set of solution principles and to test if this connection makes sense. Until now, framing...

  12. Frames and generalized shift-invariant systems

    DEFF Research Database (Denmark)

    Christensen, Ole

    2004-01-01

    With motivation from the theory of Hilbert-Schmidt operators we review recent topics concerning frames in L 2 (R) and their duals. Frames are generalizations of orthonormal bases in Hilbert spaces. As for an orthonormal basis, a frame allows each element in the underlying Hilbert space...... to be written as an unconditionally convergent infinite linear combination of the frame elements; however, in contrast to the situation for a basis, the coefficients might not be unique. We present the basic facts from frame theory and the motivation for the fact that most recent research concentrates on tight...... frames or dual frame pairs rather than general frames and their canonical dual. The corresponding results for Gabor frames and wavelet frames are discussed in detail....

  13. Framing deadly domestic violence: why the media's spin matters in newspaper coverage of femicide.

    Science.gov (United States)

    Gillespie, Lane Kirkland; Richards, Tara N; Givens, Eugena M; Smith, M Dwayne

    2013-02-01

    The news media play a substantial role in shaping society's perceptions of social issues, including domestic violence. However, minimal research has been conducted to examine whether news media frame stories of femicide within the context of domestic violence. Using frame analysis, the present research compares newspaper articles representing 113 cases of femicide that define the murder as domestic violence to a random sample of 113 cases without coverage defining the femicide as domestic violence. Findings indicate that both groups are represented by multiple frames, including a previously unidentified frame that places the femicide in the context of domestic violence as a social problem.

  14. Controversies in water management: Frames and mental models

    International Nuclear Information System (INIS)

    Kolkman, M.J.; Veen, A. van der; Geurts, P.A.T.M.

    2007-01-01

    Controversies in decision and policy-making processes can be analysed using frame reflection and mental model mapping techniques. The purpose of the method presented in this paper is to improve the quality of the information and interpretations available to decision makers, by surfacing and juxtaposing the different frames of decision makers, experts, and special interests groups. The research provides a new method to analyse frames. It defines a frame to consist of perspectives and a mental model, which are in close interaction (through second order learning processes). The mental model acts like a 'filter' through which the problem situation is observed. Five major perspective types guide the construction of meaning out of the information delivered by the mental model, and determine what actors see as their interests. The perspective types are related to an actor's institutional and personal position in the decision making process. The method was applied to a case, in order to test its viability. The case concerns the decision making process and environmental impact assessment procedure for the improvement of dike ring 53 in the Netherlands, which was initiated by the Dutch 'Flood Defences Act 1996'. In this specific case the perspectives and mental models of stakeholders were elicited to explain controversies. The case was analysed with regard to the conflicts emerging between stakeholders, on an individual level. The influence of institutional embedding of individuals on the use of information and the construction of meaning, and the limits of a participatory approach were analysed within the details of controversies that emerged during the case analysis. Complicating factor appeared to be the interaction between national dike safety norms (short term) and local water management problems (long term). Revealed controversies mainly concerned disputes between an organisational and a technical perspective. But also disputes on distribution of responsibilities

  15. Behavior of portal frames of steel hollow sections exposed to fire

    Directory of Open Access Journals (Sweden)

    Mohamed Mahmoud El-Heweity

    2012-06-01

    Full Text Available This paper presents a numerical study concerning the behavior of hollow sections steel portal frames exposed to fire. A model is developed to employ both thermal and structural responses incorporating material and geometric non-linearities. To establish the failure mechanism of a frame under fire conditions, a failure criterion is proposed and validated against available experimental data. The failure temperatures predicted through the suggested failure criterion show good agreement compared to the experimental results. A parametric study is then conducted using the calibrated model to focus on failure mechanisms and associated failure temperatures. Variables considered are fire condition and rafter’s inclination angle. The assessment of frame performance is based on the generated failure mechanism and enhancement of failure temperature due to the chosen parameters. Results indicate that the studied variables strongly affect the failure mechanisms of portal frames. Contradictory, their effects on the failure temperature are minimal. Finally, the study presents vital outlines for the designer to find out and hence trace the failure mechanism prior to the completion of the final design stage. Only at this point, the optimum fire protection or adequate section capacity can be accomplished and may seriously be implemented in the field of industrial steel constructions.

  16. Power to the frame: bringing sociology back to frame analysis

    NARCIS (Netherlands)

    Vliegenthart, R.; van Zoonen, L.

    2011-01-01

    This article critically reviews current frame and framing research in media and communication studies. It is first argued that most authors fail to distinguish between ‘frame’ and ‘framing’ and therewith produce a conceptual confusion and imprecision that is not conducive to the field. Second, it is

  17. Design and construction of an in-pipe robot for inspection and maintenance

    KAUST Repository

    Sibai, Fadi N.

    2012-12-01

    Inspection and maintenance of aging pipelines is crucial to the reliable and continued distribution of hydrocarbons. In this paper, we describe the design and construction of a robotic platform for inspection and minor maintenance of pipelines. The 7.5 kg robotic platform was demonstrated to move straight inside 12″ to 16″ diameter pipes in a forward or backward direction, and either horizontally or vertically. The experimental robotic platform has three sets of two wheels, and three driving motors. The equations governing the mechanical frame\\'s component sizes are presented and the robotic frame component dimensions derived. The paper also discusses the construction and testing of the robot. Future work includes adding sensors, controls for turning, a microcontroller board, and a robotic arm for performing maintenance tasks. © 2012 IEEE.

  18. 49 CFR 393.201 - Frames.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Frames. 393.201 Section 393.201 Transportation... SAFE OPERATION Frames, Cab and Body Components, Wheels, Steering, and Suspension Systems § 393.201 Frames. (a) The frame or chassis of each commercial motor vehicle shall not be cracked, loose, sagging or...

  19. The immigrant and the misunderstanding of emergency: The influence of frame security in the practical experimentation of an innovative one of cultural mediation on road / L’immigrato e il malintenso della sicurezza: L’influenza del frame sicuritario nella sperimentazione di una practica innovative di mediazione culturale su strada

    Directory of Open Access Journals (Sweden)

    Vincenzo Romania

    2009-10-01

    Full Text Available This paper aims at analyzing the dynamics of role construction in experimental trial “cultural This paper aims at analyzing the dynamics of role construction in experimental trial “cultural This paper aims at analyzing the dynamics of role construction in experimental trial “cultural This paper aims at analyzing the dynamics of role construction in experimental trial “cultural This paper aims at analyzing the dynamics of role construction in experimental trial “cultural This paper aims at analyzing the dynamics of role construction in experimental trial “cultural This paper aims at analyzing the dynamics of role construction in experimental trial “cultural This paper aims at analyzing the dynamics of role construction in experimental trial “cultural This paper aims at analyzing the dynamics of role construction in experimental trial “cultural This paper aims at analyzing the dynamics of role construction in experimental trial “cultural This paper aims at analyzing the dynamics of role construction in experimental trial “cultural This paper aims at analyzing the dynamics of role construction in experimental trial “cultural This paper aims at analyzing the dynamics of role construction in experimental trial “cultural This paper aims at analyzing the dynamics of role construction in experimental trial “cultural This paper aims at analyzing the dynamics of role construction in experimental trial “cultural This paper aims at analyzing the dynamics of role construction in experimental trial “cultural This paper aims at analyzing the dynamics of role construction in experimental trial “cultural This paper aims at analyzing the dynamics of role construction in experimental trial “cultural This paper aims at analyzing the dynamics of role construction in experimental trial “cultural This paper aims at analyzing the dynamics of role construction in experimental trial “cultural This paper aims at analyzing the

  20. Dragging of inertial frames.

    Science.gov (United States)

    Ciufolini, Ignazio

    2007-09-06

    The origin of inertia has intrigued scientists and philosophers for centuries. Inertial frames of reference permeate our daily life. The inertial and centrifugal forces, such as the pull and push that we feel when our vehicle accelerates, brakes and turns, arise because of changes in velocity relative to uniformly moving inertial frames. A classical interpretation ascribed these forces to acceleration relative to some absolute frame independent of the cosmological matter, whereas an opposite view related them to acceleration relative to all the masses and 'fixed stars' in the Universe. An echo and partial realization of the latter idea can be found in Einstein's general theory of relativity, which predicts that a spinning mass will 'drag' inertial frames along with it. Here I review the recent measurements of frame dragging using satellites orbiting Earth.

  1. Exploring the Framing of Animal Farming and Meat Consumption: On the Diversity of Topics Used and Qualitative Patterns in Selected Demographic Contexts.

    Science.gov (United States)

    Nijland, Hanneke J; Aarts, Noelle; van Woerkum, Cees M J

    2018-01-24

    In various contexts, people talk about animal farming and meat consumption using different arguments to construct and justify their (non-)acceptability. This article presents the results of an in-depth qualitative inquiry into the content of and contextual patterns in the everyday-life framing regarding this issue, performed among consumers in various settings in two extremes in the European sphere: the Netherlands and Turkey. We describe the methodological steps of collecting, coding, and organizing the variety of encountered framing topics, as well as our search for symbolic convergence in groups of consumers from different selected demographic contexts (country, urban-rural areas, gender, age, and education level). The framing of animal farming and meat consumption in everyday-life is not a simple one-issue rational display of facts; people referred to a vast range of topics in the categories knowledge, convictions, pronounced behaviour, values, norms, interests, and feelings. Looking at framing in relation to the researched demographic contexts, most patterns were found on the level of topics; symbolic convergence in lines of reasoning and composite framing was less prominent in groups based on single demographic contexts than anticipated. An explanation for this lies in the complexity of frame construction, happening in relation with multiple interdependent contextual features.

  2. Frames and extension problems I

    DEFF Research Database (Denmark)

    Christensen, Ole

    2014-01-01

    In this article we present a short survey of frame theory in Hilbert spaces. We discuss Gabor frames and wavelet frames and set the stage for a discussion of various extension principles; this will be presented in the article Frames and extension problems II (joint with H.O. Kim and R.Y. Kim)....

  3. A note on the standard dual frame of a wavelet frame with three-scale

    International Nuclear Information System (INIS)

    Chen Qingjiang; Wei Zongtian; Feng Jinshun

    2009-01-01

    In this paper, it is shown that there exist wavelet frames generated by two functions which have good dual wavelet frames, but for which the standard dual wavelet frame does not consist of wavelets. That is to say, the standard dual wavelet frame cannot be generated by the translations and dilations of a single function. Relation to some physical theories such as entropy and E-infinity theory is also discussed.

  4. Measuring the quality of a quantum reference frame: The relative entropy of frameness

    International Nuclear Information System (INIS)

    Gour, Gilad; Marvian, Iman; Spekkens, Robert W.

    2009-01-01

    In the absence of a reference frame for transformations associated with group G, any quantum state that is noninvariant under the action of G may serve as a token of the missing reference frame. We here present a measure of the quality of such a token: the relative entropy of frameness. This is defined as the relative entropy distance between the state of interest and the nearest G-invariant state. Unlike the relative entropy of entanglement, this quantity is straightforward to calculate, and we find it to be precisely equal to the G-asymmetry, a measure of frameness introduced by Vaccaro et al. It is shown to provide an upper bound on the mutual information between the group element encoded into the token and the group element that may be extracted from it by measurement. In this sense, it quantifies the extent to which the token successfully simulates a full reference frame. We also show that despite a suggestive analogy from entanglement theory, the regularized relative entropy of frameness is zero and therefore does not quantify the rate of interconversion between the token and some standard form of quantum reference frame. Finally, we show how these investigations yield an approach to bounding the relative entropy of entanglement.

  5. Fluoroscopic dose reduction by acquisition frame rate reduction and image processing

    International Nuclear Information System (INIS)

    Fritz, S.L.; Mirvis, S.E.; Pals, S.O.

    1986-01-01

    A new design for fluoroscopic exposure reduction incorporates pulsed x-ray exposure, progressive scan video acquisition at frame rates below 30 Hz, interlaced video display at 30 Hz, and a video rate image processing. To evaluate this design, a variety of phantom systems have been developed to measure the impact of low frame rate pulsed digital fluoroscopy on the performance of several clinical tasks (e.g., catheter placement). The authors are currently using these phantoms with a digital fluoroscopy system using continuous x-ray, interlaced video acquisition and variable acquisition frame rate. The design of their target digital fluoroscopic system, sample image sequences, and the results of some preliminary phantom studies are reported

  6. Probabilistic assessment of steel moment frames incremental collapse (ordinary, intermediate and special under earthquake

    Directory of Open Access Journals (Sweden)

    Kourosh Mehdizadeh

    2017-11-01

    Full Text Available Building collapse is a level of the structure performance in which the amount of financial and life loss is maximized, so this event could be the worst incident in the construction. Regarding to the possibility of destructive earthquakes in different parts of the world, detailed assessment of the structure's collapse has been one of the major challenges of the structural engineering. In this regard, offering models based on laboratory studies, considering the effective parameters and appropriate earthquakes could be a step towards achieving this goal. In this research, a five-story steel structure with a system of ordinary, intermediate and special moment frame (low, intermediate and high ductility has been designed based on the local regulations. In this study, the effect of resistance and stiffness deterioration of the structural elements based on the results of the laboratory models have been considered and the ductility role in the collapse capacity of steel moment frames has been investigated as probabilistic matter. For this purpose, incremental dynamic analysis has been done under 50 pairs of earthquake records proposing FEMA P695 instruction and fragility curves of various performance levels are developed. Results showed higher collapse capacity of special moment steel frame than the intermediate and ordinary moment frames. In the 50 percent probability level, the collapse capacity of special moment frame increased 34 % compared to the intermediate moment frame and 66 % to the ordinary moment frame. Also, the results showed that for different collapse spectral accelerations, the use of special moment frame instead of intermediate and ordinary moment frames reduces the collapse probability to 30 and 50 % respectively.

  7. Competitive Framing

    OpenAIRE

    Ran Spiegler

    2014-01-01

    I present a simple framework for modeling two-firm market competition when consumer choice is "frame-dependent", and firms use costless "marketing messages" to influence the consumer's frame. This framework embeds several recent models in the "behavioral industrial organization" literature. I identify a property that consumer choice may satisfy, which extends the concept of Weighted Regularity due to Piccione and Spiegler (2012), and provide a characterization of Nash equilibria under this pr...

  8. Analysis of fatigue resistance of continuous and non-continuous welded rectangular frame intersections by finite element method

    International Nuclear Information System (INIS)

    McCoy, M. L.; Moradi, R.; Lankarani, H. M.

    2011-01-01

    Agricultural and construction equipment are commonly implemented with rectangular tubing in their structural frame designs. A typical joining method to fabricate these frames is by welding and the use of ancillary structural plating at the connections. This aids two continuous members to pass through an intersection point of the frame with some degree of connectivity, but the connections are highly unbalanced as the tubing centroids exhibit asymmetry. Due to the practice of welded continuous member frame intersections in current agricultural equipment designs, a conviction may exist that welded continuous member frames are superior in structural strength over that of structural frame intersections implementing welded non-continuous members where the tubing centroids lie within two planes of symmetry, a connection design that would likely fabricating a more fatigue resistant structural frame. Three types of welded continuous tubing frame intersections currently observed in the designs of agricultural equipment were compared to two non-continuous frame intersection designs. Each design was subjected to the same loading condition and then examined for stress levels using the Finite Element Method to predict fatigue life. Results demonstrated that a lighter weight, non-continuous member frame intersection design was two magnitudes superior in fatigue resistance than some current implemented frame designs when using Stress-Life fatigue prediction methods and empirical fatigue strengths for fillet welds. Stress-Life predictions were also made using theoretical fatigue strength calculations for the fatigue strength at the welds for comparison to the empirical derived weld fatigue strength

  9. ALICE's main austenitic stainless steel support structure (the Space Frame)

    CERN Multimedia

    Maximilien Brice

    2006-01-01

    This structure is constructed to hold the large volume detectors, such as the Time Projection Chamber, Transition Radiation Detector and Time of Flight inside the ALICE solenoid magnet. After the final assembly at CERN, two large mobile cranes were needed for the job of lifting and turning the 14 tonne frame onto its side. Once shifted, it was placed in Building SX2, one of the surface assembly areas designated for ALICE.

  10. A Nuclear Submarine in the South Atlantic: The Framing of Threats and Deterrence

    Directory of Open Access Journals (Sweden)

    Mônica Herz

    Full Text Available Abstract In this article, we analyse one aspect of Brazilian nuclear policy during the tenure of the Workers Party (2003–2016: the development of a nuclear-propelled submarine. We propose that the project of building a nuclear-propelled submarine has become possible partly because of the mobilisation of a set of arguments for the construction of the South Atlantic as a strategic area, framed in terms of security and development. On the other hand, we contend that the need for a nuclear-propelled submarine is framed through the mobilisation of a specific notion of deterrence. In other words, we claim that the notions of ‘strategic area’, ‘general deterrence’, ‘conventional deterrence’, and ‘deterrence by denial’ can help us analyse the fundamental aspects involved in the framing of the South Atlantic as a security concern, justifying the nuclear-propelled submarine project.

  11. Message framing in social networking sites.

    Science.gov (United States)

    Kao, Danny Tengti; Chuang, Shih-Chieh; Wang, Sui-Min; Zhang, Lei

    2013-10-01

    Online social networking sites represent significant new opportunities for Internet advertisers. However, results based on the real world cannot be generalized to all virtual worlds. In this research, the moderating effects of need for cognition (NFC) and knowledge were applied to examine the impact of message framing on attitudes toward social networking sites. A total of 216 undergraduates participated in the study. Results reveal that for social networking sites, while high-NFC individuals form more favorable attitudes toward negatively framed messages than positively framed messages, low-NFC individuals form more favorable attitudes toward positively framed messages than negatively framed messages. In addition, low-knowledge individuals demonstrate more favorable attitudes toward negatively framed messages than positively framed messages; however, the framing effect does not differentially affect the attitudes of high-knowledge individuals. Furthermore, the framing effect does not differentially affect the attitudes of high-NFC individuals with high knowledge. In contrast, low-NFC individuals with low knowledge hold more favorable attitudes toward positively framed messages than negatively framed messages.

  12. Traditional timber frames

    NARCIS (Netherlands)

    Jorissen, A.J.M.; Hamer, den J.; Leijten, A.J.M.; Salenikovich, A.

    2014-01-01

    Due to new possibilities traditional timber framing has become increasingly popular since the beginning of the 21e century. Although traditional timber framing has been used for centuries, the expected mechanical behaviour is not dealt with in great detail in building codes, guidelines or text

  13. Project and construction of a pneumatic system for the transference of samples to a neutron generator

    International Nuclear Information System (INIS)

    Carvalho, A.N. de

    1983-01-01

    A prototype of a system for the transport of irradiated samples to and from a neutron generator, was constructed, using compressed air as propeller agent. Compressed air was injected through electrically driven values. The sample, transported by the pressure wave, was inserted into a PVC tube 50m long and weighing 23.0 g. The first tests were carried out in order to determine the times needed to transport the above-mentioned PVC support along a PVC tube of 3m length and 3/4 diameter for different air pressures applied; it was verified that for pressures between 3.0 and 8.0 kgf/cm 2 , transport times were always smaller than 2 seconds. These results showed the viability of constructing a definitive system, already projected. (C.L.B.) [pt

  14. DNA vaccination of pigs with open reading frame 1-7 of PRRS virus

    DEFF Research Database (Denmark)

    Barfoed, Annette Malene; Blixenkrone-Møller, Merete; Jensen, Merethe Holm

    2004-01-01

    We cloned all open reading frames of a Danish isolate of porcine reproductive and respiratory syndrome (PRRS) virus in DNA vaccination vectors. Pigs were vaccinated using a gene gun with each single construct (ORF1, ORF2, ORF3, ORF4, ORF5, ORF6, or ORF7) or combinations thereof. Vaccination...

  15. A framed, 16-image Kirkpatrick-Baez x-ray microscope

    Science.gov (United States)

    Marshall, F. J.; Bahr, R. E.; Goncharov, V. N.; Glebov, V. Yu.; Peng, B.; Regan, S. P.; Sangster, T. C.; Stoeckl, C.

    2017-09-01

    A 16-image Kirkpatrick-Baez (KB)-type x-ray microscope consisting of compact KB mirrors [F. J. Marshall, Rev. Sci. Instrum. 83, 10E518 (2012)] has been assembled for the first time with mirrors aligned to allow it to be coupled to a high-speed framing camera. The high-speed framing camera has four independently gated strips whose emission sampling interval is ˜30 ps. Images are arranged four to a strip with ˜60-ps temporal spacing between frames on a strip. By spacing the timing of the strips, a frame spacing of ˜15 ps is achieved. A framed resolution of ˜6-μm is achieved with this combination in a 400-μm region of laser-plasma x-ray emission in the 2- to 8-keV energy range. A principal use of the microscope is to measure the evolution of the implosion stagnation region of cryogenic DT target implosions on the University of Rochester's OMEGA Laser System [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)]. The unprecedented time and spatial resolutions achieved with this framed, multi-image KB microscope have made it possible to accurately determine the cryogenic implosion core emission size and shape at the peak of stagnation. These core size measurements, taken in combination with those of ion temperature, neutron-production temporal width, and neutron yield allow for inference of core pressures, currently exceeding 50 Gbar in OMEGA cryogenic target implosions [Regan et al., Phys. Rev. Lett. 117, 025001 (2016)].

  16. Confidence in the safety of blood for transfusion: the effect of message framing.

    Science.gov (United States)

    Farrell, K; Ferguson, E; James, V; Lowe, K C

    2001-11-01

    Blood transfusion is a universally used, life-saving medical intervention. However, there are increasing concerns among patients about blood safety. This study investigates the effect of message framing, a means of presenting information, on confidence in blood transfusion safety. The same factual information regarding the safety of blood for transfusion was presented to a sample of 254 adult students (donors and nondonors) as either a gain frame (lives saved), a loss frame (lives lost), or a combined frame (a loss frame expressed in a positive context). This provided a basic two-way, between-subjects design with 1) blood donation history (donors vs. nondonors) and 2) message frame (gain, loss, and combined) functioning as the between-groups factors. It was hypothesized that participants would consider blood safer if information was presented as a gain frame. The role of stress appraisals as potential mediators of the framing effect was also explored. As predicted, participants receiving the gain-frame information were significantly more confident of the safety of blood for transfusion than those receiving loss-frame information or both. This was unaffected by donation history or appraisals of stress associated with transfusion. The extent to which blood was considered safe was negatively associated, independently of framing effects, with perceptions that transfusion was threatening. Information about transfusion should be conveyed to patients in a form focusing on the positive, rather than the negative, known facts about the safety of blood.

  17. The research of glued frame-mounted wooden constructions

    Directory of Open Access Journals (Sweden)

    Muselemov Kh.M.

    2016-11-01

    Full Text Available the authors of this article note that the fast pace and modern construction make qualitatively new demands on building materials and structures. While great attention is paid to the production of glued wooden structures. Such designs on a number of technical and economic indicators are superior to metal and concrete have low component weight, relatively high strength and stiffness with sufficient reliability and durability. At the same time, negative characteristics of the wood (the dependence of the properties from its structure, defects, need for and considerable expense of quality timber, excessive massiveness of the cross-sections, creep under sustained loading, etc. restrict the scope and impair the indicators of glued wooden structures. One of the ways to address these shortcomings and increase techno-economic efficiency – reinforcement of sections of glued wooden structures and elements of steel or fiberglass reinforcement. This can significantly reduce the consumption of wood, reduce Assembly mass, to improve the quality and reliability of wooden structures, working mainly in bending and compression with bending.

  18. The role of message framing in promoting MMR vaccination: evidence of a loss-frame advantage.

    Science.gov (United States)

    Abhyankar, Purva; O'Connor, Daryl B; Lawton, Rebecca

    2008-01-01

    This study examined the effects of message framing on intentions to obtain the measles, mumps and rubella (MMR) vaccine for one's child and investigated whether Theory of Planned Behaviour (TPB) and perceived outcome efficacy variables mediate and/or moderate message framing effects. One hundred and forty women read either a loss-framed or gain-framed message and then completed measures assessing their intentions to obtain the MMR vaccine for their child, and TPB and outcome efficacy variables. Exposure to the loss frame increased intentions to obtain the MMR vaccine and influenced perceptions of outcome efficacy. This suggests that outcome efficacy, but not other TPB variables may mediate framing effects within the context of MMR vaccination. Message frame, in addition to TPB variables, significantly predicted unique variance in behavioural intentions. These findings are discussed within the context of Prospect Theory, perceived risk and prevention/detection behaviours.

  19. [The framing effect: medical implications].

    Science.gov (United States)

    Mazzocco, Ketti; Cherubini, Paolo; Rumiati, Rino

    2005-01-01

    Over the last 20 years, many studies explored how the way information is presented modifies choices. This sort of effect, referred to as "framing effects", typically consists of the inversion of choices when presenting structurally identical decision problems in different ways. It is a common assumption that physicians are unaffected (or less affected) by the surface description of a decision problem, because they are formally trained in medical decision making. However, several studies showed that framing effects occur even in the medical field. The complexity and variability of these effects are remarkable, making it necessary to distinguish among different framing effects, depending on whether the effect is obtained by modifying adjectives (attribute framing), goals of a behavior (goal framing), or the probability of an outcome (risky choice framing). A further reason for the high variability of the framing effects seems to be the domain of the decision problem, with different effects occurring in prevention decisions, disease-detection decisions, and treatment decisions. The present work reviews the studies on framing effects, in order to summarize them and clarify their possible role in medical decision making.

  20. Who's been framed? Framing effects are reduced in financial gambles made for others.

    Science.gov (United States)

    Ziegler, Fenja V; Tunney, Richard J

    2015-01-01

    Decisions made on behalf of other people are sometimes more rational than those made for oneself. In this study we used a monetary gambling task to ask if the framing effect in decision-making is reduced in surrogate decision-making. Participants made a series of choices between a predetermined sure option and a risky gambling option of winning a proportion of an initial stake. Trials were presented as either a gain or a loss relative to that initial stake. In half of the trials participants made choices to earn money for themselves and in the other half they earned money for another participant. Framing effects were measured as risk seeking in loss frames and risk aversion in gain frames. Significant framing effects were observed both in trials in which participants earned money for themselves and those in which they earned money for another person; however, these framing effects were significantly reduced when making decisions for another person. It appears that the reduced emotional involvement when the decision-maker is not affected by the outcome of the decision thus lessens the framing effect without eradicating it altogether. This suggests that the deviation from rational choices in decision-making can be significantly reduced when the emotional impact on the decision maker is lessened. These results are discussed in relation to Somatic Distortion Theory.

  1. Cooperation, framing and political attitudes

    DEFF Research Database (Denmark)

    Fosgaard, Toke Reinholt; Hansen, Lars Gårn; Wengström, Erik Roland

    This paper shows that political attitudes are linked to cooperative behavior in an incentivized experiment with a large sample randomly drawn from the Danish population. However, this relationship depends on the way the experiment is framed. In the standard game in which subjects give to a public...... good, contributions are the same regardless of political attitudes. In an economically equivalent version, in which subjects take from a public good, left-wingers cooperate significantly more than subjects in the middle or to the right of the political spectrum. Through simulation techniques we find...

  2. Framing scales and scaling frames

    NARCIS (Netherlands)

    van Lieshout, M.; Dewulf, A.; Aarts, N.; Termeer, K.

    2009-01-01

    Policy problems are not just out there. Actors highlight different aspects of a situation as problematic and situate the problem on different scales. In this study we will analyse the way actors apply scales in their talk (or texts) to frame the complex decision-making process of the establishment

  3. A new non-invasive and relocatable immobilization frame for fractionated stereotactic radiotherapy

    International Nuclear Information System (INIS)

    Theodorou, K.; Kappas, C.; Tsokas, C.

    1998-01-01

    Purpose: A newly developed non-invasive immobilization frame for stereotactic radiotherapy is presented, which is intended to be used for both imaging (computed tomography (CT) and angiography) and radiotherapeutic procedures. Materials and methods: The frame is made of duraluminium so as to be stable and light and it has an elliptical shape. The immobilization is achieved using three stable locations on the patient's head, i.e. the upper dentition, the nose and the back of the neck. The fixation on the three locations ensures complete immobilization in all directions. Results: The immobilization frame can be fitted as many times as is needed to most heads. In order to assess the accuracy of relocation, repeated fittings on two volunteers and on 22 patients undergoing stereotactic treatment were performed (more than 200 mountings in total), which showed maximum anterior-posterior, inferior-superior and lateral reproducibility in positioning of less than 1 mm in all cases. Conclusions and discussion: The in-house-constructed stereotactic frame is simple to use, easily made, non-invasive, relocatable and well tolerated by the patients, providing the possibility of multiple fractions. The major advantage of using such a non-invasive stereotactic frame is the flexibility in timing the different diagnostic procedures (CT and angiography) as well as providing the possibility to extend the use to large brain lesions (treatment without an additional collimator) where a high precision is also required. It also offers significant labour and cost saving over the invasive frames and the majority of the non-invasive frames. To date, 22 patients with ages varying between 12 and 70 years have been treated using this method. (Copyright (c) 1998 Elsevier Science B.V., Amsterdam. All rights reserved.)

  4. COMPATIBILITY OF NAPLS AND OTHER ORGANIC COMPOUNDS WITH MATERIALS UED IN WELL CONSTRUCTION, SAMPLING, AND REMEDIATION

    Science.gov (United States)

    Structural integrity of well construction, sampling, and remediation materials may be compromised at many hazardous sites by nonaqueous phase liquids (NAPLs) and their dissolved constituents. A literature review of compatibility theory and qualitative field experiences are provid...

  5. Nail gun injuries among construction workers.

    Science.gov (United States)

    Dement, John M; Lipscomb, Hester; Li, Leiming; Epling, Carol; Desai, Tejas

    2003-05-01

    Pneumatic nail guns greatly increase worker productivity and are extensively used in wood frame building construction, with especially high use in residential construction. One surveillance report of nail gun injuries in Washington State has been published; however, other literature consists largely of case reports and case series in trauma journals. The major objective of the current study was to investigate the occurrence of nail gun-associated injuries among construction workers and to identify preventable work-related factors associated with these injuries. Nail gun-related injuries occurring among a cohort of 13,347 carpenters in Ohio who worked union hours during the time period January 1, 1994, until September 30, 1997, were identified by matching the cohort with workers' compensation claims made to the Ohio Bureau of Workers' Compensation. We also analyzed workers' compensation claims for North Carolina Home Builders Association members for the period July 1996-November 1999 to identify nail gun-related injuries. Analyses included stratified analyses of claims by nature and body part injured, calculation of nail gun injury rates, and analyses of free text descriptions of injuries. Overall, nail gun injuries were responsible for 3.9 percent of workers' compensation claims with 8.3 percent to 25.5 percent of claims involving paid lost work time. The overall rate of nail gun injuries (cases per 200,000 work hours) was 0.33 in North Carolina and 0.26 in Ohio, reflecting the greater concentration of wood frame construction workers in the North Carolina population studied. Higher rates of injury were observed for carpenters in North Carolina and among residential carpenters in Ohio. The predominant body part injured was the hands/fingers, with 80 to 89 percent of injuries being nail punctures. Analyses of free text information for puncture injuries found approximately 70 percent of injuries to occur during the framing/sheathing stage of construction. Our data

  6. Controlled Nucleation and Growth of DNA Tile Arrays within Prescribed DNA Origami Frames and Their Dynamics

    Science.gov (United States)

    2015-01-01

    Controlled nucleation of nanoscale building blocks by geometrically defined seeds implanted in DNA nanoscaffolds represents a unique strategy to study and understand the dynamic processes of molecular self-assembly. Here we utilize a two-dimensional DNA origami frame with a hollow interior and selectively positioned DNA hybridization seeds to control the self-assembly of DNA tile building blocks, where the small DNA tiles are directed to fill the interior of the frame through prescribed sticky end interactions. This design facilitates the construction of DNA origami/array hybrids that adopt the overall shape and dimensions of the origami frame, forming a 2D array in the core consisting of a large number of simple repeating DNA tiles. The formation of the origami/array hybrid was characterized with atomic force microscopy, and the nucleation dynamics were monitored by serial AFM scanning and fluorescence spectroscopy, which revealed faster kinetics of growth within the frame as compared to growth without the presence of a frame. Our study provides insight into the fundamental behavior of DNA-based self-assembling systems. PMID:24575893

  7. Value orientation and framing as determinants of stated willingness to pay for eco-labeled electricity

    Energy Technology Data Exchange (ETDEWEB)

    Hansla, A. [Department of Psychology, University of Gothenburg, P.O. Box 500, 40530 Goeteborg (Sweden)

    2011-03-15

    In the context of a survey, an experiment examined how egoistic, altruistic, and biospheric framing of consequences influence stated willingness to pay (SWTP) for eco-labeled electricity. The results for a random sample of 476 Swedish residents showed that SWTP decreases linearly with size of the surcharge for eco-labeled electricity, that SWPT is higher for biospheric framing than for altruistic and egoistic framing, and that SWPT does not differ for altruistic and egoistic framing. A higher SWPT is also observed for individuals with a self-transcendence value orientation than for individuals with a self-enhancement value orientation.

  8. Frames in super Hilbert modules

    Directory of Open Access Journals (Sweden)

    Mehdi Rashidi-Kouchi

    2018-01-01

    Full Text Available In this paper, we define super Hilbert module and investigate frames in this space. Super Hilbert modules are  generalization of super Hilbert spaces in Hilbert C*-module setting. Also, we define frames in a super Hilbert module and characterize them by using of the concept of g-frames in a Hilbert C*-module. Finally, disjoint frames in Hilbert C*-modules are introduced and investigated.

  9. Operator representations of frames

    DEFF Research Database (Denmark)

    Christensen, Ole; Hasannasab, Marzieh

    2017-01-01

    of the properties of the operator T requires more work. For example it is a delicate issue to obtain a representation with a bounded operator, and the availability of such a representation not only depends on the frame considered as a set, but also on the chosen indexing. Using results from operator theory we show......The purpose of this paper is to consider representations of frames {fk}k∈I in a Hilbert space ℋ of the form {fk}k∈I = {Tkf0}k∈I for a linear operator T; here the index set I is either ℤ or ℒ0. While a representation of this form is available under weak conditions on the frame, the analysis...... that by embedding the Hilbert space ℋ into a larger Hilbert space, we can always represent a frame via iterations of a bounded operator, composed with the orthogonal projection onto ℋ. The paper closes with a discussion of an open problem concerning representations of Gabor frames via iterations of a bounded...

  10. Optimal primitive reference frames

    International Nuclear Information System (INIS)

    Jennings, David

    2011-01-01

    We consider the smallest possible directional reference frames allowed and determine the best one can ever do in preserving quantum information in various scenarios. We find that for the preservation of a single spin state, two orthogonal spins are optimal primitive reference frames; and in a product state, they do approximately 22% as well as an infinite-sized classical frame. By adding a small amount of entanglement to the reference frame, this can be raised to 2(2/3) 5 =26%. Under the different criterion of entanglement preservation, a very similar optimal reference frame is found; however, this time it is for spins aligned at an optimal angle of 87 deg. In this case 24% of the negativity is preserved. The classical limit is considered numerically, and indicates under the criterion of entanglement preservation, that 90 deg. is selected out nonmonotonically, with a peak optimal angle of 96.5 deg. for L=3 spins.

  11. Seismic design of steel moment resisting frames-European versus American practice

    International Nuclear Information System (INIS)

    Naqash, M.T.; Matteis, G.D.; Luca, A.D.

    2012-01-01

    This paper provides an overview on the design philosophy of moment resisting frames (MRF) according to the seismic provisions of Eurocode 8 and American Institute of Steel Construction (AISC). A synopsis of the main recommendations of the two codes is briefly described. Then in order to examine the structural efficiency of the design principles of MRF according to the aforementioned codes, a case study is developed in which spatial and perimeter moment resisting frames of 12, 6 and 3 storeys residential building are considered. In the case of EC8, Ductility Class Medium (DCM) with behaviour factor of 4 and Ductility Class High (DCH) with behaviour factor of 6.5 for 6-storey frames are used, while only DCH is employed in the design of 12 and 3 storey frames. When dealing with AISC/American Society of Civil Engineers (ASCE) code, special moment resisting frame (SMF) with response modification factor of 8 is employed in the design. The outcomes from the design are illustrated in terms of frame performance, section profiles, strength-demand to capacity ratios, drift-demand to capacity ratios and structural weight, thus allowing the understanding of pros and cons of the design criteria and the capacity design rules of the two codes. The main purpose of the current paper is to compare the seismic design rules of the two codes with a parametric analysis developed by a case study in order to let the technician knows about the importance and influence of some important parameters which are given in the capacity design rules of the two codes. This study will be a benchmark for further analysis on the two codes for seismic design of steel structures. (author)

  12. Reynolds Stress Closure for Inertial Frames and Rotating Frames

    Science.gov (United States)

    Petty, Charles; Benard, Andre

    2017-11-01

    In a rotating frame-of-reference, the Coriolis acceleration and the mean vorticity field have a profound impact on the redistribution of kinetic energy among the three components of the fluctuating velocity. Consequently, the normalized Reynolds (NR) stress is not objective. Furthermore, because the Reynolds stress is defined as an ensemble average of a product of fluctuating velocity vector fields, its eigenvalues must be non-negative for all turbulent flows. These fundamental properties (realizability and non-objectivity) of the NR-stress cannot be compromised in computational fluid dynamic (CFD) simulations of turbulent flows in either inertial frames or in rotating frames. The recently developed universal realizable anisotropic prestress (URAPS) closure for the NR-stress depends explicitly on the local mean velocity gradient and the Coriolis operator. The URAPS-closure is a significant paradigm shift from turbulent closure models that assume that dyadic-valued operators associated with turbulent fluctuations are objective.

  13. Framing effects in group investment decision making: role of group polarization.

    Science.gov (United States)

    Cheng, Pi-Yueh; Chiou, Wen-Bin

    2008-02-01

    Prospect theory proposes that framing effects result in a preference for risk-averse choices in gain situations and risk-seeking choices in loss situations. However, in group polarization situations, groups show a pronounced tendency to shift toward more extreme positions than those they initially held. Whether framing effects in group decision making are more prominent as a result of the group-polarization effect was examined. Purposive sampling of 120 college students (57 men, 63 women; M age = 20.1 yr., SD = 0.9) allowed assessment of relative preference between cautious and risky choices in individual and group decisions. Findings indicated that both group polarization and framing effects occur in investment decisions. More importantly, group decisions in a gain situation appear to be more cautious, i.e., risk averse, than individual decisions, whereas group decisions in the loss situation appear to be more risky than individual decisions. Thus, group decision making may expand framing effects when it comes to investment choices through group polarization.

  14. Oughts and ideals: Framing people with migration background in TV news

    Directory of Open Access Journals (Sweden)

    Denise Sommer

    2010-10-01

    Full Text Available Based on the framing concept the paper explores the context and structure of TV news coverage about minority groups. A sample of 285 TV news reports on people with migration background in Germany is analyzed for its implicit plot structures and particular political goal expressions. Cluster analysis reveals four news frames: Crime, Migration Policy, Cultural Proximity, and Terrorism Risk, indicating that the public image of people with migration background in Germany remains negative and implicitly biased. This becomes evident by the large amount of risk communication about potential terrorist attacks and the prevailing expression of absolute goals compared to gradual ones. Theoretically and methodically, integrating the framing concept and specific types of goals promises deeper insight into the current discourse on integration issues.

  15. FRAMING OF JOURNALISM DISCOURSE TO IMPROVE DISCOURSE COMPETENCE OF SENIOR HIGH SCHOOL STUDENTS

    Directory of Open Access Journals (Sweden)

    Dadang S. Anshori

    2017-12-01

    Full Text Available This study aims to describe the analysis model of framing on journalism discourse in Indonesian textbooks in Senior High School to be used in language learning. This research used qualitative method with framing theory from Pan and Kosicki as an tool of analysis. The research data is journalism discourse in textbook amounted to 30 pieces of discourse taken from 10 text books of class X, XI, and XII in Senior High School. The results show the following: (1 The discourse of journalism has received acceptance in the world of education, especially in textbooks. The use of journalism discourse in 10 textbooks is very high and very diverse in terms of number, topic, source, and usage. (2 The journalism discourse in the textbook meets the criteria of reporting value, even if not all reporting value is fulfilled. (3 The frame construction of the journalism discourse in Indonesian textbooks is packaged in different angles according to news topics and facts. (4 The analysis model of journalism discourse framing is developed by focusing on the structural analysis of category, syntax, script, thematic, diction/phrase, and rhetoric.

  16. A Ka-Band Celestial Reference Frame with Applications to Deep Space Navigation

    Science.gov (United States)

    Jacobs, Christopher S.; Clark, J. Eric; Garcia-Miro, Cristina; Horiuchi, Shinji; Sotuela, Ioana

    2011-01-01

    The Ka-band radio spectrum is now being used for a wide variety of applications. This paper highlights the use of Ka-band as a frequency for precise deep space navigation based on a set of reference beacons provided by extragalactic quasars which emit broadband noise at Ka-band. This quasar-based celestial reference frame is constructed using X/Ka-band (8.4/32 GHz) from fifty-five 24-hour sessions with the Deep Space Network antennas in California, Australia, and Spain. We report on observations which have detected 464 sources covering the full 24 hours of Right Ascension and declinations down to -45 deg. Comparison of this X/Ka-band frame to the international standard S/X-band (2.3/8.4 GHz) ICRF2 shows wRMS agreement of approximately 200 micro-arcsec in alpha cos(delta) and approximately 300 micro-arcsec in delta. There is evidence for systematic errors at the 100 micro-arcsec level. Known errors include limited SNR, lack of instrumental phase calibration, tropospheric refraction mis-modeling, and limited southern geometry. The motivation for extending the celestial reference frame to frequencies above 8 GHz is to access more compact source morphology for improved frame stability and to support spacecraft navigation for Ka-band based NASA missions.

  17. Hybrid external fixation of the proximal tibia: strategies to improve frame stability.

    Science.gov (United States)

    Roberts, Craig S; Dodds, James C; Perry, Kelvin; Beck, Dennis; Seligson, David; Voor, Michael J

    2003-07-01

    To determine the specific frame construction strategies that can increase the stability of hybrid (ring with tensioned wires proximally connected by bars to half-pins distally) external fixation of proximal tibia fractures. DESIGN Repeated measures biomechanical testing. Laboratory. Composite fiberglass tibias. Using the Heidelberg and Ilizarov systems, external fixators were tested on composite fiberglass tibias with a 1-cm proximal osteotomy (OTA fracture classification 41-A3.3) in seven frame configurations: unilateral frames with 5-mm diameter half-pins and 6-mm diameter half-pins; hybrid (as described above), with and without a 6-mm anterior proximal half-pin; a "box" hybrid (additional ring group distal to the fracture connected by symmetrically spaced bars to the proximal rings) with and without an anterior, proximal half-pin; and a full, four-ring configuration. Each configuration was loaded in four positions (central, medial, posterior, and posteromedial). Displacement at point of loading of proximal fragment. The "box" hybrid was stiffer than the standard hybrid for all loading positions. The addition of an anterior half-pin stiffened the standard hybrid and the "box" hybrid. The most dramatic improvements in the stability of hybrid frames used for proximal tibial fractures result from addition of an anterior, proximal half-pin.

  18. Identifying issue frames in text.

    Directory of Open Access Journals (Sweden)

    Eyal Sagi

    Full Text Available Framing, the effect of context on cognitive processes, is a prominent topic of research in psychology and public opinion research. Research on framing has traditionally relied on controlled experiments and manually annotated document collections. In this paper we present a method that allows for quantifying the relative strengths of competing linguistic frames based on corpus analysis. This method requires little human intervention and can therefore be efficiently applied to large bodies of text. We demonstrate its effectiveness by tracking changes in the framing of terror over time and comparing the framing of abortion by Democrats and Republicans in the U.S.

  19. Framing the ecosystem concept through a longitudinal study of developments in science and policy.

    Science.gov (United States)

    Aggestam, Filip

    2015-08-01

    This paper examines how scientific literature and policy documents frame the ecosystem concept and how these frames have shaped scientific dialogue and policy making over time. This was achieved by developing a frame typology, as a basis for organizing relevant value expressions, to assess how different frames have altered perspectives of the ecosystem concept. The frame typology and analysis is based on a semi-grounded and longitudinal document analysis of scientific literature and policy documents using the ecosystem concept. Despite changing discourses and public priorities (e.g., cultural constructs of biodiversity) both science and policy documents are characterized by stable value systems that have not changed substantially since the 1930s. These value systems were defined based on ethical principles that delineate 6 core frames: humans first, dual systems, eco-science, eco-holism, animals first, and multicentrism. Specific crises (e.g., climate change) and cross-disciplinary uptake and re-uptake of, for example, the ecosystem services concept, have brought new perspectives to the forefront of public discourse. These developments triggered changes in the core frames that, rather than being value based, are based on how the ecosystem is conceptualized under fixed value systems and over time. Fourteen subframes were developed to reflect these longitudinal changes. There are as such clear framing effects in both scientific literature and in policy. Ecosystem research is for instance often characterized by unstated value judgments even though the scientific community does not make these explicit. In contrast, policy documents are characterized by clear value expressions but are principally management driven and human centered. © 2015 Society for Conservation Biology.

  20. How to reduce the effect of framing on messages about health.

    Science.gov (United States)

    Garcia-Retamero, Rocio; Galesic, Mirta

    2010-12-01

    Patients must be informed about risks before any treatment can be implemented. Yet serious problems in communicating these risks occur because of framing effects. To investigate the effects of different information frames when communicating health risks to people with high and low numeracy and determine whether these effects can be countered or eliminated by using different types of visual displays (i.e., icon arrays, horizontal bars, vertical bars, or pies). Experiment on probabilistic, nationally representative US (n = 492) and German (n = 495) samples, conducted in summer 2008. Participants' risk perceptions of the medical risk expressed in positive (i.e., chances of surviving after surgery) and negative (i.e., chances of dying after surgery) terms. Although low-numeracy people are more susceptible to framing than those with high numeracy, use of visual aids is an effective method to eliminate its effects. However, not all visual aids were equally effective: pie charts and vertical and horizontal bars almost completely removed the effect of framing. Icon arrays, however, led to a smaller decrease in the framing effect. Difficulties with understanding numerical information often do not reside in the mind, but in the representation of the problem.

  1. Characterization of Oblique Dual Frame Pairs

    DEFF Research Database (Denmark)

    Christensen, Ole; Eldar, Yonina

    2006-01-01

    Given a frame for a subspace W of a Hilbert space H, we consider all possible families of oblique dual frame vectors on an appropriately chosen subspace V. In place of the standard description, which involves computing the pseudoinverse of the frame operator, we develop an alternative characteriz...... for the case of shift-invariant spaces with a single generator. The theory is also adapted to the standard frame setting in which the original and dual frames are defined on the same space. Copyright (C) 2006 Hindawi Publishing Corporation. All rights reserved.......Given a frame for a subspace W of a Hilbert space H, we consider all possible families of oblique dual frame vectors on an appropriately chosen subspace V. In place of the standard description, which involves computing the pseudoinverse of the frame operator, we develop an alternative...

  2. Seismic Response of a Platform-Frame System with Steel Columns

    Directory of Open Access Journals (Sweden)

    Davide Trutalli

    2017-04-01

    Full Text Available Timber platform-frame shear walls are characterized by high ductility and diffuse energy dissipation but limited in-plane shear resistance. A novel lightweight constructive system composed of steel columns braced with oriented strand board (OSB panels was conceived and tested. Preliminary laboratory tests were performed to study the OSB-to-column connections with self-drilling screws. Then, the seismic response of a shear wall was determined performing a quasi-static cyclic-loading test of a full-scale specimen. Results presented in this work in terms of force-displacement capacity show that this system confers to shear walls high in-plane strength and stiffness with good ductility and dissipative capacity. Therefore, the incorporation of steel columns within OSB bracing panels results in a strong and stiff platform-frame system with high potential for low- and medium-rise buildings in seismic-prone areas.

  3. Wood constructions. Energy eficient, sustainable, practically proven; Holzbau Konstruktionen. Energieeffizient, nachhaltig, praxisgerecht

    Energy Technology Data Exchange (ETDEWEB)

    Lueckmann, Rudolf

    2012-07-01

    The book 'Wood constructions' provides standardized and practically proven designs, all necessary information on building physics, fire protection and additional specialized knowledge for energy efficient renovations and construction details in wood construction. The main topics of this book are: Fundamentals, timber-frame structures, wood preservation, thermal insulation, sound insulation, fire protection, energy-efficient timber buildings, timber construction systems, rehabilitation of timber structures, relevant regulations and standards.

  4. Developing Sampling Frame for Case Study: Challenges and Conditions

    Science.gov (United States)

    Ishak, Noriah Mohd; Abu Bakar, Abu Yazid

    2014-01-01

    Due to statistical analysis, the issue of random sampling is pertinent to any quantitative study. Unlike quantitative study, the elimination of inferential statistical analysis, allows qualitative researchers to be more creative in dealing with sampling issue. Since results from qualitative study cannot be generalized to the bigger population,…

  5. Framing Autism: A Content Analysis of Five Major News Frames in U.S.-Based Newspapers.

    Science.gov (United States)

    Wendorf Muhamad, Jessica; Yang, Fan

    2017-03-01

    The portrayal of child autism-related news stories has become a serious issue in the United States, yet few studies address this from media framing perspective. To fill this gap in the literature, this study examined the applicability of a media framing scale (Semetko & Valkenburg, 2000) for the deductive examination of autism-related news stories in U.S.-based newspapers. Under the theoretical framework of framing theory, a content analysis of news stories (N = 413) was conducted to investigate the presence of the five news frames using an established questionnaire. Differentiating between local and national news outlets, the following five news frames were measured: (a) attribution of responsibility, (b) human interest, (c) conflict, (d) morality, and (e) economic consequences. Findings revealed that news stories about autism most frequently fell within the human interest frame. Furthermore, the study shed light on how local and national newspapers might differ in framing autism-related news pieces and in their placement of the autism-related story within the newspaper (e.g., front page section, community section).

  6. Framing Effects: Dynamics and Task Domains

    Science.gov (United States)

    Wang

    1996-11-01

    The author examines the mechanisms and dynamics of framing effects in risky choices across three distinct task domains (i.e., life-death, public property, and personal money). The choice outcomes of the problems presented in each of the three task domains had a binary structure of a sure thing vs a gamble of equal expected value; the outcomes differed in their framing conditions and the expected values, raging from 6000, 600, 60, to 6, numerically. It was hypothesized that subjects would become more risk seeking, if the sure outcome was below their aspiration level (the minimum requirement). As predicted, more subjects preferred the gamble when facing the life-death choice problems than facing the counterpart problems presented in the other two task domains. Subjects' risk preference varied categorically along the group size dimension in the life-death domain but changed more linearly over the expected value dimension in the monetary domain. Framing effects were observed in 7 of 13 pairs of problems, showing a positive frame-risk aversion and negative frame-risk seeking relationship. In addition, two types of framing effects were theoretically defined and empirically identified. A bidirectional framing effect involves a reversal in risk preference, and occurs when a decision maker's risk preference is ambiguous or weak. Four bidirectional effects were observed; in each case a majority of subjects preferred the sure outcome under a positive frame but the gamble under a negative frame. In contrast, a unidirectional framing effect refers to a preference shift due to the framing of choice outcomes: A majority of subjects preferred one choice outcome (either the sure thing or the gamble) under both framing conditions, with positive frame augmented the preference for the sure thing and negative frame augmented the preference for the gamble. These findings revealed some dynamic regularities of framing effects and posed implications for developing predictive and testable

  7. Ambiguities in the deduction of rest frame fluctuation spectrums from spectrums computed in moving frames

    International Nuclear Information System (INIS)

    Fredericks, R.W.; Coroniti, F.V.

    1976-01-01

    The problem of interpretation of power spectrums computed by Fourier analysis of data time series taken in frames moving with respect to the medium containing the fluctuations is examined. It is found that no unique connection exists between the rest frame power spectrum as a function of scale length and the derived power spectrum as a function 'frequency' computed from the time series data taken in the moving frame. This caused by a complex Doppler-shifting phenomenon that leads to a basically aliased frequency spectrum in the moving frame. Examples of nonuniqueness are given for various types of rest frame density or wave turbulence that lead to the same frequency dependence of the power spectrum computed in the moving frame. This has implications for the past interpretations of power spectrums of density or magnetic field fluctuations from satellites or interplanetary probes

  8. Predicting the Strength of Online News Frames

    Directory of Open Access Journals (Sweden)

    Hrvoje Jakopović

    2017-10-01

    Full Text Available Framing theory is one of the most significant approaches to understanding media and their potential impact on publics. Leaving aside that fact, the author finds that publicity effects seem to be dispersed and difficult to catch for public relations. This article employs a specific research design, which could be applied to public relations practice, namely with a view to observing correlations between specific media frames and individual frames. The approach is based on the typology of news frames. The author attributes negative, positive and neutral determinants to the types of frames in his empirical research. Online news regarding three transport organizations and the accompanying user comments (identified as negative, positive and neutral are analysed by means of the method of content and sentiment analysis. The author recognizes user comments and reviews as individual frames that take part in the creation of online image. Furthermore, he identifies the types of media frames as well as individual frames manifested as image, and undertakes correlation research in order to establish their prediction potential. The results expose the most frequently used types of media frames concerning the transport domain. The media are keen to report through the attribution of responsibility frame, and after that, through the economic frame and the conflict frame, but, on the other hand, they tend to neglect the human interest frame and the morality frame. The results show that specific types of news frames enable better prediction of user reactions. The economic frame and the human interest frame therefore represent the most predictable types of frame.

  9. Construction practices: Pulse builder survey results

    Energy Technology Data Exchange (ETDEWEB)

    Kadulski, R

    This paper discusses the results of a nationwide builder survey on common building techniques, such as framing, insulation, airtight construction practices, testing for airtightness, windows, furnaces and water heaters, and ventilation. Results indicate that changes in construction were mainly influenced by the R-2000 program. The spread of R-2000 technology is reflected in the use of higher insulation levels than are called for by codes or than is normal practice, sealing of joints, and attention to air and vapour retarders as well as air tight drywall techniques combined with mechanical ventilation systems.

  10. Biased representation of disturbance rates in the roadside sampling frame in boreal forests: implications for monitoring design

    Directory of Open Access Journals (Sweden)

    Steven L. Van Wilgenburg

    2015-12-01

    Full Text Available The North American Breeding Bird Survey (BBS is the principal source of data to inform researchers about the status of and trend for boreal forest birds. Unfortunately, little BBS coverage is available in the boreal forest, where increasing concern over the status of species breeding there has increased interest in northward expansion of the BBS. However, high disturbance rates in the boreal forest may complicate roadside monitoring. If the roadside sampling frame does not capture variation in disturbance rates because of either road placement or the use of roads for resource extraction, biased trend estimates might result. In this study, we examined roadside bias in the proportional representation of habitat disturbance via spatial data on forest "loss," forest fires, and anthropogenic disturbance. In each of 455 BBS routes, the area disturbed within multiple buffers away from the road was calculated and compared against the area disturbed in degree blocks and BBS strata. We found a nonlinear relationship between bias and distance from the road, suggesting forest loss and forest fires were underrepresented below 75 and 100 m, respectively. In contrast, anthropogenic disturbance was overrepresented at distances below 500 m and underrepresented thereafter. After accounting for distance from road, BBS routes were reasonably representative of the degree blocks they were within, with only a few strata showing biased representation. In general, anthropogenic disturbance is overrepresented in southern strata, and forest fires are underrepresented in almost all strata. Similar biases exist when comparing the entire road network and the subset sampled by BBS routes against the amount of disturbance within BBS strata; however, the magnitude of biases differed. Based on our results, we recommend that spatial stratification and rotating panel designs be used to spread limited BBS and off-road sampling effort in an unbiased fashion and that new BBS routes

  11. Framing and Claiming: How Information-Framing Affects Expected Social Security Claiming Behavior.

    Science.gov (United States)

    Brown, Jeffrey R; Kapteyn, Arie; Mitchell, Olivia S

    2016-03-01

    This paper provides evidence that Social Security benefit claiming decisions are strongly affected by framing and are thus inconsistent with expected utility theory. Using a randomized experiment that controls for both observable and unobservable differences across individuals, we find that the use of a "breakeven analysis" encourages early claiming. Respondents are more likely to delay when later claiming is framed as a gain, and the claiming age is anchored at older ages. Additionally, the financially less literate, individuals with credit card debt, and those with lower earnings are more influenced by framing than others.

  12. Strategic Framing Study Circles: Toward a Gold Standard of Framing Pedagogy

    Science.gov (United States)

    Feinberg, Jane

    2009-01-01

    This article explains how communities of practice have been developed as part of FrameWorks' field-building efforts. Strategic Framing Study Circles, as they are known, have been conducted with four statewide coalitions, one group of national organizations, and an emerging regional coalition. The goal of each community of practice is to build…

  13. Compliance Framing - Framing Compliance

    OpenAIRE

    Lutz-Ulrich Haack; Martin C. Reimann

    2012-01-01

    Corporations have to install various organizational measures to comply with legal as well as internal guidelines systematically. Compliance management systems have the challenging task to make use of an internal compliance-marketing approach in order to ensure not only an adequate but also effective compliance-culture. Compliance-literature and findings of persuasive goal-framing-theory give opposite implications for establishing a rather values- versus rule-based compliance-culture respectiv...

  14. Novices’ Struggles with Conceptual and Theoretical Framing in Writing Dissertations and Papers for Publication

    Directory of Open Access Journals (Sweden)

    Christine Pearson Casanave

    2015-04-01

    Full Text Available In this conceptual paper, we address the problem that novice scholars in social sciences sometimes have in constructing conceptual or theoretical frameworks for their dissertations and papers for publication. In the first part of the paper, we discuss why the topic is important in the high pressure environment that novice scholars face, in which finishing a doctoral degree and getting published can make a difference in career success or failure, and explain our understanding of theoretical/conceptual framing, including provisionally defining some key terms. We then elucidate ten problems that novice scholars have with theoretical/conceptual framing, using our own experiences as manuscript reviewers and writers as examples. The paper concludes with ways that novice scholars can address the task of framing their scholarly work conceptually and theoretically, on the understanding that the struggles continue over the lifetime of a scholarly career.

  15. The Framing of Humanitarian Crises in the Spanish Media: An Inductive Approach

    Directory of Open Access Journals (Sweden)

    Alberto Ardèvol-Abreu

    2016-01-01

    Full Text Available The media are important actors in humanitarian crisis management and resolution, both in the countries facing the crises and in the rest of the world. Based on an inductive approach to a news sample from four Spanish newspapers, this study analyses the news frames used in the coverage of countries facing humanitarian crises. Results show that, with certain differences between countries, the Spanish press frames these countries as being theatres of war and violence, Islamic terrorism, and crime. From a theoretical perspective, results also suggest that news frames should not be classified either as "generic" or "specific", but that they should instead be placed on a continuous scale ranging from "generic" through to "specific".

  16. Characterization of Oblique Dual Frame Pairs

    Directory of Open Access Journals (Sweden)

    Christensen Ole

    2006-01-01

    Full Text Available Given a frame for a subspace of a Hilbert space , we consider all possible families of oblique dual frame vectors on an appropriately chosen subspace . In place of the standard description, which involves computing the pseudoinverse of the frame operator, we develop an alternative characterization which in some cases can be computationally more efficient. We first treat the case of a general frame on an arbitrary Hilbert space, and then specialize the results to shift-invariant frames with multiple generators. In particular, we present explicit versions of our general conditions for the case of shift-invariant spaces with a single generator. The theory is also adapted to the standard frame setting in which the original and dual frames are defined on the same space.

  17. Fractal space frames and metamaterials for high mechanical efficiency

    OpenAIRE

    Farr, R. S.; Mao, Y.

    2010-01-01

    A solid slender beam of length $L$, made from a material of Young's modulus $Y$ and subject to a gentle compressive force $F$, requires a volume of material proportional to $L^{3}f^{1/2}$ [where $f\\equiv F/(YL^{2})\\ll 1$] in order to be stable against Euler buckling. By constructing a hierarchical space frame, we are able to systematically change the scaling of required material with $f$ so that it is proportional to $L^{3}f^{(G+1)/(G+2)}$, through changing the number of hierarchical levels $...

  18. Simple Design Tool for Development of Well Insulated Window Frames and Optimization of the Frame Geometry

    DEFF Research Database (Denmark)

    Zajas, Jan Jakub; Heiselberg, Per

    2012-01-01

    in order to approach an optimal solution. The program was also used to conduct an optimization process of the frame geometry. A large number of various window frame designs were created and evaluated, based on their insulation properties. The paper presents the investigation process and some of the best......This paper describes a design tool created with the purpose of designing highly insulated window frames. The design tool is based on a parametric model of the frame geometry, where various parameters describing the frame can be easily changed by the user. Based on this input, geometry of the frame...... is generated by the program and is used by the finite element simulator to calculate the thermal performance of the frame (the U value). After the initial design is evaluated, the user can quickly modify chosen parameters and generate a new design. This process can then be repeated in multiple iterations...

  19. The Framing of Humanitarian Crises in the Spanish Media: An Inductive Approach

    OpenAIRE

    Alberto Ardèvol-Abreu

    2016-01-01

    The media are important actors in humanitarian crisis management and resolution, both in the countries facing the crises and in the rest of the world. Based on an inductive approach to a news sample from four Spanish newspapers, this study analyses the news frames used in the coverage of countries facing humanitarian crises. Results show that, with certain differences between countries, the Spanish press frames these countries as being theatres of war and violence, Islamic terrorism, and crim...

  20. GROUND WATER ISSUE: NONAQUEOUS PHASE LIQUIDS COMPATIBILITY WITH MATERIALS USED IN WELL CONSTRUCTION, SAMPLING, AND REMEDIATION.

    Science.gov (United States)

    This issue paper provides a comprehensive literature review regarding the compatibility of NAPLs with a wide variety of materials used at hazardous waste sites. A condensed reference table of compatibility data for 207 chemicals and 28 commonly used well construction and sampling...

  1. On the interaction between media frames and individual frames of the Israeli-Palestinian conflict

    Directory of Open Access Journals (Sweden)

    Wilhelm Kempf

    2012-10-01

    Full Text Available The present paper reports on a media effects research experiment in which six groups of participants were asked to read and evaluate differently framed news articles about two scenarios: a Palestinian attack on Israel and an Israeli military operation against Palestinians. The experimental results show that media peace frames of violent events in the Israeli-Palestinian conflict are generally regarded by the German public as more comprehensible, less biased, more balanced and less partisan than media war frames of the same events. The specific ways in which recipients respond to the frames, however, depend on their prior knowledge of the conflict, on their positioning to the conflict and on their sensitivity to the ambivalence of war and peace for both Israel and the Palestinians. This supports the hypothesis that neither news selection nor framing have uniform effects on public opinion.

  2. On the structures of Grassmannian frames

    OpenAIRE

    Haas IV, John I.; Casazza, Peter G.

    2017-01-01

    A common criterion in the design of finite Hilbert space frames is minimal coherence, as this leads to error reduction in various signal processing applications. Frames that achieve minimal coherence relative to all unit-norm frames are called Grassmannian frames, a class which includes the well-known equiangular tight frames. However, the notion of "coherence minimization" varies according to the constraints of the ambient optimization problem, so there are other types of "minimally coherent...

  3. The study of elastio-plastic seismic analysis for rigid-frame structures

    OpenAIRE

    陳, 珉; 青木, 徹彦

    2000-01-01

    Elastic and elastio-plastic earthquake-resistant analysis of frame construction is mainly studied in this paper. In elastic stage, response and vibrated characteristics of symmetrical and unsymmetrical structure are investigated by comparing the results of plane and space analysis. The effect of approaching angle of seismic wave to vibrated characteristics of structure under different column/beam rate are discussed. In elastio-plastic stage, four kinds of plastic mode with different plastic p...

  4. Framing the challenge of climate change in Nature and Science editorials

    Science.gov (United States)

    Hulme, Mike; Obermeister, Noam; Randalls, Samuel; Borie, Maud

    2018-06-01

    Through their editorializing practices, leading international science journals such as Nature and Science interpret the changing roles of science in society and exert considerable influence on scientific priorities and practices. Here we examine nearly 500 editorials published in these two journals between 1966 and 2016 that deal with climate change, thereby constructing a lens through which to view the changing engagement of science and scientists with the issue. A systematic longitudinal frame analysis reveals broad similarities between Nature and Science in the waxing and waning of editorializing attention given to the topic, but, although both journals have diversified how they frame the challenges of climate change, they have done so in different ways. We attribute these differences to three influences: the different political and epistemic cultures into which they publish; their different institutional histories; and their different editors and editorial authorship practices.

  5. New avenues for framing research

    NARCIS (Netherlands)

    de Vreese, C.H.

    2012-01-01

    In this article, the author reviews the studies in this special issue of the American Behavioral Scientist. It is a strong collection of articles reporting findings from an integrated project that looks at frame building, frames, and effects of frames. The project is part of an exciting large-scale

  6. Six problems in frame theory

    DEFF Research Database (Denmark)

    Christensen, Ole

    2014-01-01

    We discuss various problems in frame theory that have been open for some years. A short discussion of frame theory is also provided, but it only contains the information that is necessary in order to understand the open problems and their role.......We discuss various problems in frame theory that have been open for some years. A short discussion of frame theory is also provided, but it only contains the information that is necessary in order to understand the open problems and their role....

  7. Framing (implicitly) matters

    DEFF Research Database (Denmark)

    Anderson, Joel; Antalikova, Radka

    2014-01-01

    Denmark is currently experiencing the highest immigration rate in its modern history. Population surveys indicate that negative public attitudes toward immigrants actually stem from attitudes toward their (perceived) Islamic affiliation. We used a framing paradigm to investigate the explicit...... and implicit attitudes of Christian and Atheist Danes toward targets framed as Muslims or as immigrants. The results showed that explicit and implicit attitudes were more negative when the target was framed as a Muslim, rather than as an immigrant. Interestingly, implicit attitudes were qualified...... by the participants’ religion. Specifically, analyses revealed that Christians demonstrated more negative implicit attitudes toward immigrants than Muslims. Conversely, Atheists demonstrated more negative implicit attitudes toward Muslims than Atheists. These results suggest a complex relationship between religion...

  8. MedlinePlus FAQ: Framing

    Science.gov (United States)

    ... URL of this page: https://medlineplus.gov/faq/framing.html I'd like to link to MedlinePlus, ... M. encyclopedia. Our license agreements do not permit framing of their content from our site. For more ...

  9. Framing and Claiming: How Information-Framing Affects Expected Social Security Claiming Behavior

    Science.gov (United States)

    Brown, Jeffrey R.; Kapteyn, Arie; Mitchell, Olivia S.

    2017-01-01

    This paper provides evidence that Social Security benefit claiming decisions are strongly affected by framing and are thus inconsistent with expected utility theory. Using a randomized experiment that controls for both observable and unobservable differences across individuals, we find that the use of a “breakeven analysis” encourages early claiming. Respondents are more likely to delay when later claiming is framed as a gain, and the claiming age is anchored at older ages. Additionally, the financially less literate, individuals with credit card debt, and those with lower earnings are more influenced by framing than others. PMID:28579641

  10. 28 CFR 570.21 - Time-frames.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Time-frames. 570.21 Section 570.21... PROGRAMS Pre-Release Community Confinement § 570.21 Time-frames. (a) Community confinement. Inmates may be... inmate's term of imprisonment or six months. (c) Exceeding time-frames. These time-frames may be exceeded...

  11. Construction and Optimization of Three-Dimensional Disaster Scenes within Mobile Virtual Reality

    Directory of Open Access Journals (Sweden)

    Ya Hu

    2018-06-01

    Full Text Available Because mobile virtual reality (VR is both mobile and immersive, three-dimensional (3D visualizations of disaster scenes based in mobile VR enable users to perceive and recognize disaster environments faster and better than is possible with other methods. To achieve immersion and prevent users from feeling dizzy, such visualizations require a high scene-rendering frame rate. However, the existing related visualization work cannot provide a sufficient solution for this purpose. This study focuses on the construction and optimization of a 3D disaster scene in order to satisfy the high frame-rate requirements for the rendering of 3D disaster scenes in mobile VR. First, the design of a plugin-free browser/server (B/S architecture for 3D disaster scene construction and visualization based in mobile VR is presented. Second, certain key technologies for scene optimization are discussed, including diverse modes of scene data representation, representation optimization of mobile scenes, and adaptive scheduling of mobile scenes. By means of these technologies, smartphones with various performance levels can achieve higher scene-rendering frame rates and improved visual quality. Finally, using a flood disaster as an example, a plugin-free prototype system was developed, and experiments were conducted. The experimental results demonstrate that a 3D disaster scene constructed via the methods addressed in this study has a sufficiently high scene-rendering frame rate to satisfy the requirements for rendering a 3D disaster scene in mobile VR.

  12. Seismic Performance Comparison of a High-Content SDA Frame and Standard RC Frame

    OpenAIRE

    van de Lindt, John W.; Rechan, R. Karthik

    2011-01-01

    This study presents the method and results of an experiment to study the seismic behavior of a concrete portal frame with fifty percent of its cement content replaced with a spray dryer ash (SDA). Based on multiple-shake-table tests, the high content SDA frame was found to perform as well as the standard concrete frame for two earthquakes exceeding design-level intensity earthquakes. Hence, from a purely seismic/structural standpoint, it may be possible to replace approximately fifty percen...

  13. Reactor plant construction productivity, why so different

    International Nuclear Information System (INIS)

    Palmeter, S.B.

    1976-01-01

    The manual labor component (manhours per kw) required to construct a nuclear power plant has increased radically since the advent of the fixed price turnkey projects of the late 1960's and early 1970's. Utilities and their architect-engineers have been, for the past several years, evaluating and diagnosing possible reasons for the increase and, in particular, the wide variation in labor manhours per kw among plants built in the same time frame. Since construction labor can amount to as much as 35--40% of direct capital cost, ways and means must be found to arrest this manhour escalation. One important way is by improving productivity. Some of the manhour increase is beyond an owner's control, e.g. NRC regulatory and other federal and state requirements adding to the scope of work. Several areas where there is potential for productivity improvement are identified as follows: (1) Revise contract strategy and bid work on a fixed price basis. This can be done by utilizing bid packages where the scope of work is clearly identified and based on well defined plans and specifications. (2) Upgrade the quality of construction management and remove first line supervision from union control. Use periodic work sampling to pinpoint causes and cure for poor productivity. (3) Reduce design complexity and improve constructibility by means of innovative design and material utilization--models help. (4) Improve labor productivity by restoring management rights in collective bargaining agreements. If this is not possible, go open shop or owner build with your own work force

  14. Crash fatality risk and unibody versus body-on-frame structure in SUVs.

    Science.gov (United States)

    Ossiander, Eric M; Koepsell, Thomas D; McKnight, Barbara

    2014-09-01

    In crashes between cars and SUVs, car occupants are more likely to be killed than if they crashed with another car. An increasing proportion of SUVs are built with unibody, rather than truck-like body-on-frame construction. Unibody SUVs are generally lighter, less stiff, and less likely to roll over than body-on-frame SUVs, but whether unibody structure affects risk of death in crashes is unknown. To determine whether unibody SUVs differ from body-on-frame SUVs in the danger they pose to occupants of other vehicles and in the self-protection they offer to their own occupants. Case-control study of crashes between one compact SUV and one other passenger vehicle in the US during 1995-2008, in which the SUV was model year 1996-2006. Cases were all decedents in fatal crashes, one control was selected from each non-fatal crash. Occupants of passenger vehicles that crashed with compact unibody SUVs were at 18% lower risk of death compared to those that crashed with compact body-on-frame SUVs (adjusted odds ratio 0.82 (95% confidence interval 0.73-0.94)). Occupants of compact unibody SUVs were also at lower risk of death compared to occupants of body-on-frame SUVs (0.86 (0.72-1.02)). In two-vehicle collisions involving compact SUVs, unibody structure was associated with lower risk of death both in occupants of other vehicles in the crash, and in SUVs' own occupants. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. Gain-Framed Messages Do Not Motivate Sun Protection: A Meta-Analytic Review of Randomized Trials Comparing Gain-Framed and Loss-Framed Appeals for Promoting Skin Cancer Prevention

    Science.gov (United States)

    O’Keefe, Daniel J.; Wu, Daisy

    2012-01-01

    Persuading people to undertake actions to prevent skin cancer is an important public health challenge. A number of studies have compared the effectiveness of gain-framed and loss-framed appeals in this domain, often expecting gain-framed appeals to be more persuasive. A meta-analytic review (k = 33, N = 4,168), however, finds no significant difference in the persuasiveness of gain- and loss-framed appeals for encouraging skin cancer prevention. This conclusion is unaffected by differences in the specific protective action advocated or by differences in the kind of outcomes invoked. But the results offer an intimation that men might be more susceptible to framing variations in this domain—with loss-framed appeals potentially having a persuasive advantage. PMID:22829794

  16. Seismic data interpolation and denoising by learning a tensor tight frame

    International Nuclear Information System (INIS)

    Liu, Lina; Ma, Jianwei; Plonka, Gerlind

    2017-01-01

    Seismic data interpolation and denoising plays a key role in seismic data processing. These problems can be understood as sparse inverse problems, where the desired data are assumed to be sparsely representable within a suitable dictionary. In this paper, we present a new method based on a data-driven tight frame (DDTF) of Kronecker type (KronTF) that avoids the vectorization step and considers the multidimensional structure of data in a tensor-product way. It takes advantage of the structure contained in all different modes (dimensions) simultaneously. In order to overcome the limitations of a usual tensor-product approach we also incorporate data-driven directionality. The complete method is formulated as a sparsity-promoting minimization problem. It includes two main steps. In the first step, a hard thresholding algorithm is used to update the frame coefficients of the data in the dictionary; in the second step, an iterative alternating method is used to update the tight frame (dictionary) in each different mode. The dictionary that is learned in this way contains the principal components in each mode. Furthermore, we apply the proposed KronTF to seismic interpolation and denoising. Examples with synthetic and real seismic data show that the proposed method achieves better results than the traditional projection onto convex sets method based on the Fourier transform and the previous vectorized DDTF methods. In particular, the simple structure of the new frame construction makes it essentially more efficient. (paper)

  17. Seismic data interpolation and denoising by learning a tensor tight frame

    Science.gov (United States)

    Liu, Lina; Plonka, Gerlind; Ma, Jianwei

    2017-10-01

    Seismic data interpolation and denoising plays a key role in seismic data processing. These problems can be understood as sparse inverse problems, where the desired data are assumed to be sparsely representable within a suitable dictionary. In this paper, we present a new method based on a data-driven tight frame (DDTF) of Kronecker type (KronTF) that avoids the vectorization step and considers the multidimensional structure of data in a tensor-product way. It takes advantage of the structure contained in all different modes (dimensions) simultaneously. In order to overcome the limitations of a usual tensor-product approach we also incorporate data-driven directionality. The complete method is formulated as a sparsity-promoting minimization problem. It includes two main steps. In the first step, a hard thresholding algorithm is used to update the frame coefficients of the data in the dictionary; in the second step, an iterative alternating method is used to update the tight frame (dictionary) in each different mode. The dictionary that is learned in this way contains the principal components in each mode. Furthermore, we apply the proposed KronTF to seismic interpolation and denoising. Examples with synthetic and real seismic data show that the proposed method achieves better results than the traditional projection onto convex sets method based on the Fourier transform and the previous vectorized DDTF methods. In particular, the simple structure of the new frame construction makes it essentially more efficient.

  18. Justice orientation as a moderator of the framing effect on procedural justice perception.

    Science.gov (United States)

    Sasaki, Hiroyuki; Hayashi, Yoichiro

    2014-01-01

    Justice orientation is a justice-relevant personality trait, which is referred to as the tendency to attend to fairness issues and to internalize justice as a moral virtue. This study examined the moderating role of justice orientation in the relationship between justice perception and response to a decision problem. The authors manipulated procedural justice and the outcome valence of the decision frame within a vignette, and measured justice orientation of 174 Japanese participants. As hypothesized, the results indicated an interaction between procedural justice and framing manipulation, which was moderated by individual differences in justice orientation. In negative framing, justice effects were larger for individuals with high rather than low justice orientation. The results are explained from a social justice perspective, and the contributions and limitations of this study are also discussed with respect to our sample and framing manipulation.

  19. An introduction to finite tight frames

    CERN Document Server

    Waldron, Shayne F D

    2018-01-01

    This textbook is an introduction to the theory and applications of finite tight frames, an area that has developed rapidly in the last decade. Stimulating much of this growth are the applications of finite frames to diverse fields such as signal processing, quantum information theory, multivariate orthogonal polynomials, and remote sensing. Key features and topics: * First book entirely devoted to finite frames * Extensive exercises and MATLAB examples for classroom use * Important examples, such as harmonic and Heisenberg frames, are presented in preliminary chapters, encouraging readers to explore and develop an intuitive feeling for tight frames * Later chapters delve into general theory details and recent research results * Many illustrations showing the special aspects of the geometry of finite frames * Provides an overview of the field of finite tight frames * Discusses future research directions in the field Featuring exercises and MATLAB examples in each chapter, the book is well suited as a textbook ...

  20. Framing and misperception in public good experiments

    DEFF Research Database (Denmark)

    Fosgaard, Toke Reinholt; Hansen, Lars Gårn; Wengström, Erik Roland

    2017-01-01

    Earlier studies have found that framing has substantial impact on the degree of cooperation observed in public good experiments. We show that the way the public good game is framed affects misperceptions about the incentives of the game. Moreover, we show that such framing-induced differences...... in misperceptions are linked to the framing effect on subjects' cooperation behavior. When we do not control for the different levels of misperceptions between frames, we observe a significant framing effect on subjects’ cooperation preferences. However, this framing effect becomes insignificant once we remove...

  1. The effect of message frame in anti-smoking public service announcements on cognitive response and attitude toward smoking.

    Science.gov (United States)

    Shen, Lijiang

    2010-01-01

    This study investigated whether and how message frames in anti-smoking public service announcements (PSAs) affect individuals' cognition and attitude toward smoking. Individuals in a sample of 315 participants were randomly assigned to one of three experimental framing conditions: (a) health consequence, (b) secondhand smoke, and (c) industry manipulation. Each participant viewed four PSAs in a random order within a particular message frame. The study found strong evidence for the application effect in framing. The accessibility effect in framing was found to be conditional on message frame. Individuals' cognition on health consequence of smoking and on industry manipulation predicted their attitude toward smoking, but not cognition on secondhand smoke. The three frames also led to different patterns of affective responses that can be a basis for persuasion. Implications for message framing effect and anti-smoking campaigns were discussed.

  2. Framing of health information messages.

    Science.gov (United States)

    Akl, Elie A; Oxman, Andrew D; Herrin, Jeph; Vist, Gunn E; Terrenato, Irene; Sperati, Francesca; Costiniuk, Cecilia; Blank, Diana; Schünemann, Holger

    2011-12-07

    The same information about the evidence on health effects can be framed either in positive words or in negative words. Some research suggests that positive versus negative framing can lead to different decisions, a phenomenon described as the framing effect. Attribute framing is the positive versus negative description of a specific attribute of a single item or a state, for example, "the chance of survival with cancer is 2/3" versus "the chance of mortality with cancer is 1/3". Goal framing is the description of the consequences of performing or not performing an act as a gain versus a loss, for example, "if you undergo a screening test for cancer, your survival will be prolonged" versus "if you don't undergo screening test for cancer, your survival will be shortened". To evaluate the effects of attribute (positive versus negative) framing and of goal (gain versus loss) framing of the same health information, on understanding, perception of effectiveness, persuasiveness, and behavior of health professionals, policy makers, and consumers. We searched the Cochrane Central Register of Controlled Trials (CENTRAL, The Cochrane Library, issue 3 2007), MEDLINE (Ovid) (1966 to October 2007), EMBASE (Ovid) (1980 to October 2007), PsycINFO (Ovid) (1887 to October 2007). There were no language restrictions. We reviewed the reference lists of related systematic reviews, included studies and of excluded but closely related studies. We also contacted experts in the field. We included randomized controlled trials, quasi-randomised controlled trials, and cross-over studies with health professionals, policy makers, and consumers evaluating one of the two types of framing. Two review authors extracted data in duplicate and independently. We graded the quality of evidence for each outcome using the GRADE approach. We standardized the outcome effects using standardized mean difference (SMD). We stratified the analysis by the type of framing (attribute, goal) and conducted pre

  3. Relationship between the framing effect and individual differences in medical students and psychology students

    Directory of Open Access Journals (Sweden)

    Tatyana V. Kornilova

    2017-12-01

    Full Text Available Background. Framing effect is rarely studied in relation to individual differences. In cognitive psychology, it reflects distortions in decision-making depending on the context (phrasing of statements about alternatives, and framing is found within medical professional samples. Objective. The objective of the study are asfollows: 1. to identify the differences in the students of medical and non-medical universities and susceptibility to framing,2. establish in both groups similarities of individual decision-making styles (coping with uncertainty if any in self-assessments (intelligence, risk taking and personality and in willingness to take risks and tolerance/intolerance to uncertainty, 3. to identify the specific relationship between susceptibility to the framing effect (FE in medical students with their personal properties. Design. The paper describes the study of framing on medicine (n = 78 and psychology students (n = 122. It is demonstrated that in Kahneman and Tversky’s “Asian disease problem”, the psychology students show reframing effect while medical students don’t show difference in answers. Participants who choose different answers in negative phrasing of the issue differ in self-esteemed risk taking and intolerance for uncertainty; but there is no difference in positive version of the problem. Differences in personality profiles of the future members of medical and non-medical students have been established, both in terms of the personality variables and their associations to the dynamic regulatory systems. Medical students are characterized with less procrastination and higher risk readiness. Self-esteemed risk is correlated with risk readiness in both samples (and negatively connected to rationality within the psychology student sample. Unexpectedly, risk preparedness is also correlated with intolerance for uncertainty in both groups. Medical students are characterized by specific correlation between risk readiness and

  4. Schizophrenia in the News: The Role of News Frames in Shaping Online Reader Dialogue about Mental Illness.

    Science.gov (United States)

    Gwarjanski, Anna Rae; Parrott, Scott

    2018-08-01

    A quantitative content analysis examined the portrayal of schizophrenia in eight of the most read online news publications in the United States. The analysis documented the prevalence of stigma frames, which communicate stereotypes concerning schizophrenia, and stigma-challenge frames, which contradict stereotypes, in 558 articles related to schizophrenia. The study also examined the relationship between media framing and reader commentary, including the likelihood of readers posting stigmatizing comments, stigma-challenging comments, and comments in which they disclosed personal experience with mental illness. Stigma frames were prevalent in the sample, suggesting the news media continue associating schizophrenia with violent and criminal behavior. Stigma frames stood greater chance of being accompanied by stigmatizing comments from readers when compared to stigma-challenging frames. Conversely, stigma-challenging frames stood greater chance of being accompanied by stigma-challenging comments from readers. Readers were more likely to disclose personal experience with mental illness when they encountered a stigma-challenging frame. Recommendations are made for journalists and health communicators.

  5. Coupling of linearized gravity to nonrelativistic test particles: Dynamics in the general laboratory frame

    International Nuclear Information System (INIS)

    Speliotopoulos, A.D.; Chiao, Raymond Y.

    2004-01-01

    The coupling of gravity to matter is explored in the linearized gravity limit. The usual derivation of gravity-matter couplings within the quantum-field-theoretic framework is reviewed. A number of inconsistencies between this derivation of the couplings and the known results of tidal effects on test particles according to classical general relativity are pointed out. As a step towards resolving these inconsistencies, a general laboratory frame fixed on the worldline of an observer is constructed. In this frame, the dynamics of nonrelativistic test particles in the linearized gravity limit is studied, and their Hamiltonian dynamics is derived. It is shown that for stationary metrics this Hamiltonian reduces to the usual Hamiltonian for nonrelativistic particles undergoing geodesic motion. For nonstationary metrics with long-wavelength gravitational waves present (GWs), it reduces to the Hamiltonian for a nonrelativistic particle undergoing geodesic deviation motion. Arbitrary-wavelength GWs couple to the test particle through a vector-potential-like field N a , the net result of the tidal forces that the GW induces in the system, namely, a local velocity field on the system induced by tidal effects, as seen by an observer in the general laboratory frame. Effective electric and magnetic fields, which are related to the electric and magnetic parts of the Weyl tensor, are constructed from N a that obey equations of the same form as Maxwell's equations. A gedankin gravitational Aharonov-Bohm-type experiment using N a to measure the interference of quantum test particles is presented

  6. Approximation of the inverse G-frame operator

    Indian Academy of Sciences (India)

    ... projection method for -frames which works for all conditional -Riesz frames. We also derive a method for approximation of the inverse -frame operator which is efficient for all -frames. We show how the inverse of -frame operator can be approximated as close as we like using finite-dimensional linear algebra.

  7. Public understanding of One Health messages: The role of temporal framing.

    Science.gov (United States)

    Roh, Sungjong; Rickard, Laura N; McComas, Katherine A; Decker, Daniel J

    2018-02-01

    Building on research in motivated reasoning and framing in science communication, we examine how messages that vary attribution of responsibility (human vs animal) and temporal orientation (now vs in the next 10 years) for wildlife disease risk influence individuals' conservation intentions. We conducted a randomized experiment with a nationally representative sample of US adults ( N = 355), which revealed that for people low in biospheric concern, messages that highlighted both human responsibility for and the imminent nature of the risk failed to enhance conservation intentions compared with messages highlighting animal responsibility. However, when messages highlighting human responsibility placed the risk in a temporally distal frame, conservation intentions increased among people low in biospheric concern. We assess the underlying mechanism of this effect and discuss the value of temporal framing in overcoming motivated skepticism to improve science communication.

  8. POINT CLOUD DERIVED FROMVIDEO FRAMES: ACCURACY ASSESSMENT IN RELATION TO TERRESTRIAL LASER SCANNINGAND DIGITAL CAMERA DATA

    Directory of Open Access Journals (Sweden)

    P. Delis

    2017-02-01

    Full Text Available The use of image sequences in the form of video frames recorded on data storage is very useful in especially when working with large and complex structures. Two cameras were used in this study: Sony NEX-5N (for the test object and Sony NEX-VG10 E (for the historic building. In both cases, a Sony α f = 16 mm fixed focus wide-angle lens was used. Single frames with sufficient overlap were selected from the video sequence using an equation for automatic frame selection. In order to improve the quality of the generated point clouds, each video frame underwent histogram equalization and image sharpening. Point clouds were generated from the video frames using the SGM-like image matching algorithm. The accuracy assessment was based on two reference point clouds: the first from terrestrial laser scanning and the second generated based on images acquired using a high resolution camera, the NIKON D800. The performed research has shown, that highest accuracies are obtained for point clouds generated from video frames, for which a high pass filtration and histogram equalization had been performed. Studies have shown that to obtain a point cloud density comparable to TLS, an overlap between subsequent video frames must be 85 % or more. Based on the point cloud generated from video data, a parametric 3D model can be generated. This type of the 3D model can be used in HBIM construction.

  9. Trial frame refraction versus autorefraction among new patients in a low-vision clinic.

    Science.gov (United States)

    DeCarlo, Dawn K; McGwin, Gerald; Searcey, Karen; Gao, Liyan; Snow, Marsha; Waterbor, John; Owsley, Cynthia

    2013-01-02

    To determine the relationship between refractive error as measured by autorefraction and that measured by trial frame refraction among a sample of adults with vision impairment seen in a university-based low-vision clinic and to determine if autorefraction might be a suitable replacement for trial frame refraction. A retrospective chart review of all new patients 19 years or older seen over an 18-month period was conducted and the following data collected: age, sex, primary ocular diagnosis, entering distance visual acuity, habitual correction, trial frame refraction, autorefraction, and distance visual acuity measured after trial frame refraction. Trial frame refraction and autorefraction were compared using paired t-tests, intraclass correlations, and Bland-Altman plots. Final analyses included 440 patients for whom both trial frame refraction and autorefraction data were available for the better eye. Participants were mostly female (59%) with a mean age of 68 years (SD = 20). Age-related macular degeneration was the most common etiology for vision impairment (44%). Values for autorefraction and trial frame refraction were statistically different, but highly correlated for the spherical equivalent power (r = 0.92), the cylinder power (r = 0.80) and overall blurring strength (0.89). Although the values of the cross-cylinders J(0) and J(45) were similar, they were poorly correlated (0.08 and 0.15, respectively). The range of differences in spherical equivalent power was large (-8.6 to 4.9). Autorefraction is highly correlated with trial frame refraction. Differences are sometimes substantial, making autorefraction an unsuitable substitute for trial frame refraction.

  10. Technological Frame Incongruence, Diffusion, and Noncompliance

    Science.gov (United States)

    Sobreperez, Polly

    The technological frames of reference strand of social shaping of technology theory is used to overlay the issues arising from a case study looking at noncompliance with information systems. A recent review of the theory suggests that although frame content is often addressed, frame structure, the process of framing, and the characteristics and outcomes of frames are largely overlooked. This paper attempts to address this shortfall by applying the indicators identified by case study research to the frames of different groups and using them to highlight differing perceptions and attitudes. In this way, the author suggests that issues surrounding noncompliance should not be dismissed as resistance but instead should be further studied by managers and developers, leading to accommodation of differing views. Further examination of frame incongruence reveals dependence on inefficient or ineffective organizational situations and thus these indicators can be useful in future studies to identify and address procedural, acceptance and cultural issues leading to acts of noncompliance.

  11. CMHC research project: Testing of air barriers construction details: Report

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    This project was conducted to quantify the air leakage characteristics of the header joist, the electric outlets, and the window openings in wood-frame walls. The study evaluated the sealed internal membrane method, where polyethylene sheet and sealant provide the air barrier; the external air barrier method, which uses a continuous vapour permeable membrane (spun-bonded olefin film), sandwiched between two layers of external wall sheathing; and the airtight drywall method, where the interior gypsum board finish, together with framing materials and gaskets, are used as the air barrier. In addition, the traditional approach to wood-frame wall construction, where no special attention is given to achieving a continuous air barrier, was evaluated for comparison.

  12. Exploring the Effects of Communication Framed by Environmental Concern in Informal Science Education Contexts

    Science.gov (United States)

    Yocco, Victor S.

    . A measure of future intention was taken to allow for comparison between messages. Lastly, interviews of visitors to a science center were conducted to uncover a deeper understanding of the results from the previous four studies. Findings suggest that while there is a relationship between individuals' feeling of overlap between nature and their level of environmental concern they are two separate psychological constructs. Visitors prefer the biospheric framed statement regardless of their level of concern or feeling of overlap with nature. Shultz and Zelezney's (2003) assertion regarding the effectiveness of egoistic framed messages was refuted by the results of the quasi-experimental studies, in which participants who received the biospheric framed messages expressed a significantly greater intent to engage in environmentally friendly behaviors than those who received the egoistic framed messages. Implications to theory from these results include that there is little evidence to support visiting a zoo increases one's feeling of closeness with nature, however it does seem that individuals' levels of biospheric concern increases, perhaps temporarily, by a form of perspective taking which occurs during the visit. Implications to practice include the need to consider context when developing a message (e.g. a visit to the zoo as opposed to a visit to a botanical garden). Future research suggested includes comparing samples gathered from other venues (e.g. sporting events), the need for research on memory or retention of these messages long term, and the need for studies on repeated exposure to messages over time.

  13. Multimodal news framing effects

    NARCIS (Netherlands)

    Powell, T.E.

    2017-01-01

    Visuals in news media play a vital role in framing citizens’ political preferences. Yet, compared to the written word, visual images are undervalued in political communication research. Using framing theory, this thesis redresses the balance by studying the combined, or multimodal, effects of visual

  14. Framing in criminal investigation

    Science.gov (United States)

    2016-01-01

    Failures in criminal investigation may lead to wrongful convictions. Insight in the criminal investigation process is needed to understand how these investigative failures may rise and how measures can contribute to the prevention of this kind of failures. Some of the main findings of an empirical study of the criminal investigation process in four cases of major investigations are presented here. This criminal investigation process is analyzed as a process of framing, using Goffman's framing (Goffman, 1975) and interaction theories (Goffman, 1990). It shows that in addition to framing, other substantive and social factors affect the criminal investigation. PMID:29046594

  15. Frames y prácticas discursivas entre Estado y poblaciones negras en Colombia: racismo estructural y derechos humanos

    Directory of Open Access Journals (Sweden)

    Adriana Espinosa Bonilla

    2014-06-01

    Full Text Available Frames and Discursive Practices between State and Black Populations in Colombia: Structural Racism and Human Rights Abstract This article discusses the way the discourses and counter-discourses have been used in the construction of frames on behalf of the actor-network, Process of Black Communities, in its dialogue with the Colombian government within the framework of the hearings of the Inter-american Commission on Human Rights (IACHR between 2007 and 2013. Theoretically, the notions of biopower, biopolitics, governmentality and discursive practices developed by Michel Foucault are addressed , as well as the theory of frames by Snow and Bendford. Methodologically, audios and videos of the hearings before the Commission are analyzed. In the analysis of the interaction between State and Afro petitioners there were identified frames, discourses and counter-discourses related to racism, territoriality, victimization of afro populations and women, and armed conflict. The findings identify frames around the issue of human rights, aimed at harnessing the discursive and political opportunities opened by the Commission to influence the decisions of the state actor.

  16. To the rationalization of the constructive solutions of the bridge supports

    Directory of Open Access Journals (Sweden)

    Petrova Olena

    2017-01-01

    Full Text Available Reduction of material consumption and labor intensity of building structures is a topical task for both theory and practice of building production. Today there are many ways to achieve proper economic effect while reconstruction or erection of building and structures. One of them is to rationalize well-known constructive solutions using as criteria the value of density of potential energy of deformation of structures. In this connection, the new constructive solution for short massive supports with outer reinforcement made of expanded metal sheet and frames (reinforcing rings which are used in construction of road and railway bridges and high-rise buildings is proposed in this paper. The theoretical approach for the definition of its rational parameters is given. Numerical analysis of the highlighted method is also carried out. As a result of study the increase in the bearing capacity in concrete pillars made in rational mesh clips with and without frames was obtained.

  17. Temporal framing and the hidden-zero effect: rate-dependent outcomes on delay discounting.

    Science.gov (United States)

    Naudé, Gideon P; Kaplan, Brent A; Reed, Derek D; Henley, Amy J; DiGennaro Reed, Florence D

    2018-05-01

    Recent research suggests that presenting time intervals as units (e.g., days) or as specific dates, can modulate the degree to which humans discount delayed outcomes. Another framing effect involves explicitly stating that choosing a smaller-sooner reward is mutually exclusive to receiving a larger-later reward, thus presenting choices as an extended sequence. In Experiment 1, participants (N = 201) recruited from Amazon Mechanical Turk completed the Monetary Choice Questionnaire in a 2 (delay framing) by 2 (zero framing) design. Regression suggested a main effect of delay, but not zero, framing after accounting for other demographic variables and manipulations. We observed a rate-dependent effect for the date-framing group, such that those with initially steep discounting exhibited greater sensitivity to the manipulation than those with initially shallow discounting. Subsequent analyses suggest these effects cannot be explained by regression to the mean. Experiment 2 addressed the possibility that the null effect of zero framing was due to within-subject exposure to the hidden- and explicit-zero conditions. A new Amazon Mechanical Turk sample completed the Monetary Choice Questionnaire in either hidden- or explicit-zero formats. Analyses revealed a main effect of reward magnitude, but not zero framing, suggesting potential limitations to the generality of the hidden-zero effect. © 2018 Society for the Experimental Analysis of Behavior.

  18. Replication Rate, Framing, and Format Affect Attitudes and Decisions about Science Claims.

    Science.gov (United States)

    Barnes, Ralph M; Tobin, Stephanie J; Johnston, Heather M; MacKenzie, Noah; Taglang, Chelsea M

    2016-01-01

    A series of five experiments examined how the evaluation of a scientific finding was influenced by information about the number of studies that had successfully replicated the initial finding. The experiments also tested the impact of frame (negative, positive) and numeric format (percentage, natural frequency) on the evaluation of scientific findings. In Experiments 1 through 4, an attitude difference score served as the dependent measure, while a measure of choice served as the dependent measure in Experiment 5. Results from a diverse sample of 188 non-institutionalized U.S. adults (Experiment 2) and 730 undergraduate college students (Experiments 1, 3, and 4) indicated that attitudes became more positive as the replication rate increased and attitudes were more positive when the replication information was framed positively. The results also indicate that the manner in which replication rate was framed had a greater impact on attitude than the replication rate itself. The large effect for frame was attenuated somewhat when information about replication was presented in the form of natural frequencies rather than percentages. A fifth study employing 662 undergraduate college students in a task in which choice served as the dependent measure confirmed the framing effect and replicated the replication rate effect in the positive frame condition, but provided no evidence that the use of natural frequencies diminished the effect.

  19. Replication Rate, Framing, and Format Affect Attitudes and Decisions about Science Claims

    Directory of Open Access Journals (Sweden)

    Ralph M. Barnes

    2016-11-01

    Full Text Available A series of five experiments examined how the evaluation of a scientific finding was influenced by information about the number of studies that had successfully replicated the initial finding. The experiments also tested the impact of frame (negative, positive and numeric format (percentage, natural frequency on the evaluation of scientific findings. In Experiments 1 through 4, an attitude difference score served as the dependent measure, while a measure of choice served as the dependent measure in Experiment 5. Results from a diverse sample of 188 non-institutionalized U.S. adults (Experiment 2 and 730 undergraduate college students (Experiments 1, 3, and 4 indicated that attitudes became more positive as the replication rate increased and attitudes were more positive when the replication information was framed positively. The results also indicate that the manner in which replication rate was framed had a greater impact on attitude than the replication rate itself. The large effect for frame was attenuated somewhat when information about replication was presented in the form of natural frequencies rather than percentages. A fifth study employing 662 undergraduate college students in a task in which choice served as the dependent measure confirmed the framing effect and replicated the replication rate effect in the positive frame condition, but provided no evidence that the use of natural frequencies diminished the effect.

  20. Replication Rate, Framing, and Format Affect Attitudes and Decisions about Science Claims

    Science.gov (United States)

    Barnes, Ralph M.; Tobin, Stephanie J.; Johnston, Heather M.; MacKenzie, Noah; Taglang, Chelsea M.

    2016-01-01

    A series of five experiments examined how the evaluation of a scientific finding was influenced by information about the number of studies that had successfully replicated the initial finding. The experiments also tested the impact of frame (negative, positive) and numeric format (percentage, natural frequency) on the evaluation of scientific findings. In Experiments 1 through 4, an attitude difference score served as the dependent measure, while a measure of choice served as the dependent measure in Experiment 5. Results from a diverse sample of 188 non-institutionalized U.S. adults (Experiment 2) and 730 undergraduate college students (Experiments 1, 3, and 4) indicated that attitudes became more positive as the replication rate increased and attitudes were more positive when the replication information was framed positively. The results also indicate that the manner in which replication rate was framed had a greater impact on attitude than the replication rate itself. The large effect for frame was attenuated somewhat when information about replication was presented in the form of natural frequencies rather than percentages. A fifth study employing 662 undergraduate college students in a task in which choice served as the dependent measure confirmed the framing effect and replicated the replication rate effect in the positive frame condition, but provided no evidence that the use of natural frequencies diminished the effect. PMID:27920743

  1. Construction monitoring constraints and challenges:A feasibility study

    OpenAIRE

    Fidler, Paul; Vardanega, Paul J; Long, Peter; Webb, Graham; Stehle, John; Middleton, Campbell

    2013-01-01

    This paper presents a study of the constraints and challenges faced by the authors when invited to study the feasibility of developing a monitoring system to provide specific information sought by the designer and contractor during the construction of the new 225m high, 48 storey steel-framed Leadenhall Building, located at 122 Leadenhall Street in London. The original goal of the study was to develop a system to assist with the active alignment of the building during construction, a key aim ...

  2. Analyzing the Effect of Spinning Process Variables on Draw Frame Blended Cotton Mélange Yarn Quality

    Science.gov (United States)

    Ray, Suchibrata; Ghosh, Anindya; Banerjee, Debamalya

    2017-12-01

    An investigation has been made to study the effect of important spinning process variables namely shade depth, ring frame spindle speed and yarn twist multiplier (TM) on various yarn quality parameters like unevenness, strength, imperfection, elongation at break and hairiness index of draw frame blended cotton mélange yarn. Three factors Box and Behnken design of experiment has been used to conduct the study. The quadratic regression model is used to device the statistical inferences about sensitivity of the yarn quality parameters to the different process variables. The response surfaces are constructed for depicting the geometric representation of yarn quality parameters plotted as a function of process variables. Analysis of the results show that yarn strength of draw frame blended cotton mélange yarn is significantly affected by shade depth and TM. Yarn unevenness is affected by shade depth and ring frame spindle speed. Yarn imperfection level is mainly influenced by the shade depth and spindle speed. The shade depth and yarn TM have shown significant impact on yarn hairiness index.

  3. Perceived risk as a moderator of the effectiveness of framed HIV-test promotion messages among women: a randomized controlled trial.

    Science.gov (United States)

    Hull, Shawnika J

    2012-01-01

    Researchers argue that gain-framed messages should be more effective for prevention behaviors, while loss frames should be more effective for detection behaviors (Rothman & Salovey, 1997). Evidence for this taxonomy has been mixed. This study examines whether the effects of gain- and loss-framed messages on HIV-testing intentions is moderated by perceived risk of a positive result. This experiment was conducted online and utilized a single factor (frame: gain/loss) between subjects design, with a separate HIV-test promotion control and a no message control to examine whether perceived risk of a positive test result moderates the effects of framed messages on intentions to seek an HIV test in the next 3 months. The sample (N = 1052; M age = 22, SD = 2.22), recruited through Survey Sampling International, included 51% Black women (49% White women). HIV-test promotion messages were more effective than no message, but there were no other main effects for condition. Results also demonstrated a significant interaction between message frame and perceived risk, which is mediated through elaborative processing of the message. The interaction demonstrated an advantage for the loss-framed message among women with some perceived risk and an advantage for the gain-framed message among women with low perceived risk. Results imply that the prevention/detection function of the behavior may be an inadequate distinction in the consideration of the effectiveness of framed messages promoting HIV testing. Rather, this study demonstrates that risk perceptions are an important moderator of framing effects.

  4. RCC-CW - Rules for design and construction of PWR nuclear civil works

    International Nuclear Information System (INIS)

    2016-01-01

    RCC-CW describes the rules for designing, building and testing civil engineering works in PWR reactors. It explains the principles and requirements for the safety, serviceability and durability of concrete and metal frame structures, based on Eurocode design principles (European standards for the structural design of construction works) combined with specific measures for safety-class buildings. The code is produced as part of the RCC-CW Subcommittee, which includes all the parties involved in civil engineering works in the nuclear sector: clients, contractors, general and specialized firms, consultancies and inspection offices. The code covers the following areas relating to the design and construction of civil engineering works that play an important safety role: geotechnical aspects, reinforced concrete structures and galleries, pre-stressed containments with metal liner, metal containment and pool liners, metal frames, anchors, concrete cylinder pipes, containment leak tests. The RCC-CW code is available as an ETC-C version specific to EPR projects (European pressurized reactor). Contents of the 2016 edition of the RCC-CW Code: Part G - General: scope, standards, notations, quality management, general principles; Part D - Design: actions and combinations of actions, geotechnical aspects, pre-stressed or reinforced concrete structures, metal containment liners, metal pool liners, metal frames, anchors; Part C - Construction: geotechnical aspects, concrete, surface finish and formwork, reinforcement for reinforced concrete, pre-stressing processes, prefabricated concrete elements, metal containment liners, metal pool liners, metal frames, anchors, embedded pipelines, joint sealing, survey networks and tolerances; Part M - Maintenance and monitoring: containment integrity and rate tests

  5. Decisions, decisions: analysis of age, cohort, and time of testing on framing of risky decision options.

    Science.gov (United States)

    Mayhorn, Christopher B; Fisk, Arthur D; Whittle, Justin D

    2002-01-01

    Decision making in uncertain environments is a daily challenge faced by adults of all ages. Framing decision options as either gains or losses is a common method of altering decision-making behavior. In the experiment reported here, benchmark decision-making data collected in the 1970s by Tversky and Kahneman (1981, 1988) were compared with data collected from current samples of young and older adults to determine whether behavior was consistent across time. Although differences did emerge between the benchmark and the present samples, the effect of framing on decision behavior was relatively stable. The present findings suggest that adults of all ages are susceptible to framing effects. Results also indicated that apparent age differences might be better explained by an analysis of cohort and time-of-testing effects. Actual or potential applications of this research include an understanding of how framing might influence the decision-making behavior of people of all ages in a number of applied contexts, such as product warning interactions and medical decision scenarios.

  6. Framing effects: The impact of framing on copresence in virtual theatre

    OpenAIRE

    Unterman, Benjamin Asher

    2017-01-01

    Virtual theatre (enacted dramatic narrative performed live online) is an emerging form of theatrical mediation. One of the biggest challenges faced by this growing media practice is the management of audience experience. This thesis attempts to address the uncertainty around virtual theatre audiences by focusing on the framing of performances that take place in virtual worlds. Strategic approaches to framing and audience preparation are suggested based on literature-based research, case studi...

  7. Components interaction in timber framed masonry structures subjected to lateral forces

    Directory of Open Access Journals (Sweden)

    Andreea DUTU

    2012-07-01

    Full Text Available Structures with timber framed masonry represent a special typology that is frequently found in Europe and other countries of the world. They are traditional buildings, non-engineered, which showed an unexpected redundancy during earthquakes where reinforced concrete buildings (improperly constructed collapsed. In the paper, aspects regarding the interaction between timber elements and masonry are mainly addressed, that were observed both in experimental studies, but also in the in situ seismic behavior of this type of structure during important earthquakes.

  8. Effects of Valenced Media Frames of Cancer Diagnoses and Therapies: Quantifying the Transformation and Establishing of Evaluative Schemas.

    Science.gov (United States)

    Guenther, Lars; Froehlich, Klara; Milde, Jutta; Heidecke, Gitte; Ruhrmann, Georg

    2015-01-01

    Journalists portray health issues within different frames, which may shape news recipients' evaluations, attitudes, and behaviors. As the research on framing continues to face theoretical challenges and methodological concerns, this study examines the transformation and establishing of evaluative schemas, which are steps in the process toward attitudinal change. The study measures recipients' evaluations of actual television clips dealing with cancer diagnoses and cancer therapies. Two valenced (positive vs. negative) media frames were tested in a 3-week online panel (n = 298) using a pretest-posttest design with a German sample. The results offer limited support for the hypothesis that media frames transform participants' schemas, but do not support the hypothesis that new schemas are established in response to media frames. The study also investigates interactions between framing and participants' issue involvement, as well as between framing and topic-specific interest and media use.

  9. Framing, intentions, and trust-choice incompatibility

    NARCIS (Netherlands)

    Keren, G.B.

    2007-01-01

    The present paper examines how framing of messages and the intentions inferred from different—positive vs. negative—framings, interact with the development of trust. Empirical evidence is presented showing that different, logically equivalent, frames are supposedly interpreted as implying different

  10. Perception of Construction Participants in Construction delays: A case study in Tamilnadu, India.

    Science.gov (United States)

    Rathinakumar, V.; Vignesh, T.; Dhivagar, K.

    2017-07-01

    Delays in the construction industry are universal fact, which affects the construction participants. The research work spotlights on determining the prevailing delays in the cities of Tamil Nadu, as perceived by the participants. After a few field level interactions, a questionnaire was framed and administered to the participants i.e., Consultants (50 Nos.), contractors (50 Nos.) and clients (150 Nos.) to understand their perception on the causes of delays. The factors for delay was categorized into 4 groups say Improper project planning, Design related issues, Finance related issues and Resource related issues. The responses were analysed using the SPSS software by applying ANOVA and Regression analysis. From the analysis, it was found that the personal financial problems of the client dominantly affect the entire construction progress and the subsequent design changes by the clients, Inadequate early project planning, labour related issues. Also, the delay groups were found to be the improper project planning and the Resource related issues.

  11. Framing messages about weight discrimination: impact on public support for legislation.

    Science.gov (United States)

    Puhl, R M; Heuer, C; Sarda, V

    2011-06-01

    To assess the public support for potential legislation to prohibit weight-based discrimination against obese individuals in the United States, and to examine whether certain message frames about weight discrimination influence public support. Participants were randomly assigned to read one of the four paragraphs that framed the topic of weight discrimination in a distinct way (or a control condition with no paragraph). Participants were then asked to indicate their level of support for six antidiscrimination laws. A national sample of 1114 participants (48% women, 52% men), mean age 44.78 years (s.d. = 15.93). There was moderate support for several laws to prohibit weight-based discrimination, but gender differences were observed across experimental conditions indicating that some message frames may increase support for certain laws among women, but not men. However, message frames had no effect on support for laws with specific provisions to prohibit weight discrimination in the workplace, suggesting that public support for these particular legal measures is consistent and high (65% of men and 81% of women expressed support) regardless of how the issue of weight discrimination is framed to the public. The present findings provide evidence of current levels of public support for legislation to prohibit weight-based discrimination, and offer potential ways for policy makers and interest groups to communicate messages about weight discrimination in efforts to increase support.

  12. Harnessing different motivational frames via mobile phones to promote daily physical activity and reduce sedentary behavior in aging adults.

    Directory of Open Access Journals (Sweden)

    Abby C King

    Full Text Available Mobile devices are a promising channel for delivering just-in-time guidance and support for improving key daily health behaviors. Despite an explosion of mobile phone applications aimed at physical activity and other health behaviors, few have been based on theoretically derived constructs and empirical evidence. Eighty adults ages 45 years and older who were insufficiently physically active, engaged in prolonged daily sitting, and were new to smartphone technology, participated in iterative design development and feasibility testing of three daily activity smartphone applications based on motivational frames drawn from behavioral science theory and evidence. An "analytically" framed custom application focused on personalized goal setting, self-monitoring, and active problem solving around barriers to behavior change. A "socially" framed custom application focused on social comparisons, norms, and support. An "affectively" framed custom application focused on operant conditioning principles of reinforcement scheduling and emotional transference to an avatar, whose movements and behaviors reflected the physical activity and sedentary levels of the user. To explore the applications' initial efficacy in changing regular physical activity and leisure-time sitting, behavioral changes were assessed across eight weeks in 68 participants using the CHAMPS physical activity questionnaire and the Australian sedentary behavior questionnaire. User acceptability of and satisfaction with the applications was explored via a post-intervention user survey. The results indicated that the three applications were sufficiently robust to significantly improve regular moderate-to-vigorous intensity physical activity and decrease leisure-time sitting during the 8-week behavioral adoption period. Acceptability of the applications was confirmed in the post-intervention surveys for this sample of midlife and older adults new to smartphone technology. Preliminary data

  13. Assessing the sustainable construction of large construction companies in Malaysia

    Science.gov (United States)

    Adewale, Bamgbade Jibril; Mohammed, Kamaruddeen Ahmed; Nasrun, Mohd Nawi Mohd

    2016-08-01

    Considering the increasing concerns for the consideration of sustainability issues in construction project delivery within the construction industry, this paper assesses the extent of sustainable construction among Malaysian large contractors, in order to ascertain the level of the industry's impacts on both the environment and the society. Sustainable construction explains the construction industry's responsibility to efficiently utilise the finite resources while also reducing construction impacts on both humans and the environment throughout the phases of construction. This study used proportionate stratified random sampling to conduct a field study with a sample of 172 contractors out of the 708 administered questionnaires. Data were collected from large contractors in the eleven states of peninsular Malaysia. Using the five-level rating scale (which include: 1= Very Low; 2= Low; 3= Moderate; 4= High; 5= Very High) to describe the level of sustainable construction of Malaysian contractors based on previous studies, statistical analysis reveals that environmental, social and economic sustainability of Malaysian large contractors are high.

  14. Online sparse representation for remote sensing compressed-sensed video sampling

    Science.gov (United States)

    Wang, Jie; Liu, Kun; Li, Sheng-liang; Zhang, Li

    2014-11-01

    Most recently, an emerging Compressed Sensing (CS) theory has brought a major breakthrough for data acquisition and recovery. It asserts that a signal, which is highly compressible in a known basis, can be reconstructed with high probability through sampling frequency which is well below Nyquist Sampling Frequency. When applying CS to Remote Sensing (RS) Video imaging, it can directly and efficiently acquire compressed image data by randomly projecting original data to obtain linear and non-adaptive measurements. In this paper, with the help of distributed video coding scheme which is a low-complexity technique for resource limited sensors, the frames of a RS video sequence are divided into Key frames (K frames) and Non-Key frames (CS frames). In other words, the input video sequence consists of many groups of pictures (GOPs) and each GOP consists of one K frame followed by several CS frames. Both of them are measured based on block, but at different sampling rates. In this way, the major encoding computation burden will be shifted to the decoder. At the decoder, the Side Information (SI) is generated for the CS frames using traditional Motion-Compensated Interpolation (MCI) technique according to the reconstructed key frames. The over-complete dictionary is trained by dictionary learning methods based on SI. These learning methods include ICA-like, PCA, K-SVD, MOD, etc. Using these dictionaries, the CS frames could be reconstructed according to sparse-land model. In the numerical experiments, the reconstruction performance of ICA algorithm, which is often evaluated by Peak Signal-to-Noise Ratio (PSNR), has been made compared with other online sparse representation algorithms. The simulation results show its advantages in reducing reconstruction time and robustness in reconstruction performance when applying ICA algorithm to remote sensing video reconstruction.

  15. Pseudo-entanglement evaluated in noninertial frames

    International Nuclear Information System (INIS)

    Mehri-Dehnavi, Hossein; Mirza, Behrouz; Mohammadzadeh, Hosein; Rahimi, Robabeh

    2011-01-01

    Research highlights: → We study pseudo-entanglement in noninertial frames. → We examine different measures of entanglement and nonclassical correlation for the state. → We find the threshold for entanglement is changed in noninertial frames. → We also describe the behavior of local unitary classes of states in noninertial frames. - Abstract: We study quantum discord, in addition to entanglement, of bipartite pseudo-entanglement in noninertial frames. It is shown that the entanglement degrades from its maximum value in a stationary frame to a minimum value in an infinite accelerating frame. There is a critical region found in which, for particular cases, entanglement of states vanishes for certain accelerations. The quantum discord of pseudo-entanglement decreases by increasing the acceleration. Also, for a physically inaccessible region, entanglement and nonclassical correlation are evaluated and shown to match the corresponding values of the physically accessible region for an infinite acceleration.

  16. Health Versus Appearance Versus Body Competence: A Content Analysis Investigating Frames of Health Advice in Women's Health Magazines.

    Science.gov (United States)

    Aubrey, Jennifer Stevens; Hahn, Rachel

    2016-05-01

    The present study investigated the extent to which women's health magazines advise readers to adopt healthy behaviors in order to look good (appearance frame), in order to feel good (health frame), or in order to perform better (body competence frame). A content analysis of 5 years of the 6 highest circulating U.S. women's health magazines revealed a higher frequency of health frames (32.6%) than appearance frames (24.8%) overall, but when beauty/health hybrid magazines (i.e., Shape and Self) were examined separately, appearance frames (32.8%) outnumbered health frames (26.5%). Compared to appearance and health frames, body competence frames were underrepresented (13.3% in the full sample). The visual sexual objectification of female models in women's health magazines was also investigated. Appearance-framed articles (43.2%) were significantly more likely to visually depict women with a high degree of skin exposure than health-framed articles (17.4%), and appearance-framed articles (34.8%) were more likely to focus on individual body parts than health-framed articles (21.3%). In addition, despite the magazines' editorial focus on health, the most frequent category of products advertised was appearance-enhancing products. Results are discussed in light of self-determination theory (Deci & Ryan, 1985) and objectification theory (Fredrickson & Roberts, 1997).

  17. Education and Decision-Making: An Experimental Study on the Framing Effect in China

    OpenAIRE

    Wen Fan; Wen Fan

    2017-01-01

    China’s higher education expansion policy has been in effect for almost two decades. Under this policy, a growing number of youths have gained access to higher education, which aims to train students to be more rational. This study examines human rationality at a Chinese college through an experiment based on the risky-choice framing effect. The basic results show no classical framing effect with regard to individual decisions for the entire sample in a benchmark setting. However, when the pa...

  18. Strategic framing in the BP crisis: A semantic network analysis of associative frames

    NARCIS (Netherlands)

    Schultz, F.; Kleinnijenhuis, J.; Oegema, D.; Utz, S.; van Atteveldt, W.H.

    2012-01-01

    This paper contributes to the analysis of the interplay of public relations and news in crisis situations, and the conceptualization of strategic framing by introducing the idea of associative frames and the method of semantic network analysis to the PR research field. By building on a more advanced

  19. Magnetic resonance described in the excitation dependent rotating frame of reference.

    Science.gov (United States)

    Tahayori, Bahman; Johnston, Leigh A; Mareels, Iven M Y; Farrell, Peter M

    2008-01-01

    An excitation dependent rotating frame of reference to observe the magnetic resonance phenomenon is introduced in this paper that, to the best of our knowledge, has not been used previously in the nuclear magnetic resonance context. The mathematical framework for this new rotating frame of reference is presented based on time scaling the Bloch equation after transformation to the classical rotating frame of reference whose transverse plane is rotating at the Larmor frequency. To this end, the Bloch equation is rewritten in terms of a magnetisation vector observed from the excitation dependent rotating frame of reference. The resultant Bloch equation is referred to as the time scaled Bloch equation. In the excitation dependent rotating frame of reference whose coordinates are rotating at the instantaneous Rabi frequency the observed magnetisation vector is a much slower signal than the true magnetisation in the rotating frame of reference. As a result the ordinary differential equation solvers have the ability to solve the time scaled version of the Bloch equation with a larger step size resulting in a smaller number of samples for solving the equation to a desired level of accuracy. The simulation results for different types of excitation are presented in this paper. This method may be used in true Bloch simulators in order to reduce the simulation time or increase the accuracy of the numerical solution. Moreover, the time scaled Bloch equation may be employed to determine the optimal excitation pattern in magnetic resonance imaging as well as designing pulses with better slice selectivity which is an active area of research in this field.

  20. Postural adaptation of the spatial reference frames to microgravity: back to the egocentric reference frame.

    Directory of Open Access Journals (Sweden)

    Sébastien Viel

    Full Text Available BACKGROUND: In order to test how gravitational information would affect the choice of stable reference frame used to control posture and voluntary movement, we have analysed the forearm stabilisation during sit to stand movement under microgravity condition obtained during parabolic flights. In this study, we hypothesised that in response to the transient loss of graviceptive information, the postural adaptation might involve the use of several strategies of segmental stabilisation, depending on the subject's perceptual typology (dependence--independence with respect to the visual field. More precisely, we expected a continuum of postural strategies across subjects with 1 at one extreme the maintaining of an egocentric reference frame and 2 at the other the re-activation of childhood strategies consisting in adopting an egocentric reference frame. METHODOLOGY/PRINCIPAL FINDINGS: To check this point, a forearm stabilisation task combined with a sit to stand movement was performed with eyes closed by 11 subjects during parabolic flight campaigns. Kinematic data were collected during 1-g and 0-g periods. The postural adaptation to microgravity's constraint may be described as a continuum of strategies ranging from the use of an exo- to an egocentric reference frame for segmental stabilisation. At one extremity, the subjects used systematically an exocentric frame to control each of their body segments independently, as under normogravity conditions. At the other, the segmental stabilisation strategies consist in systematically adopting an egocentric reference frame to control their forearm's stabilisation. A strong correlation between the mode of segmental stabilisation used and the perceptual typology (dependence--independence with respect to the visual field of the subjects was reported. CONCLUSION: The results of this study show different subjects' typologies from those that use the forearm orientation in a mainly exocentric reference frame to

  1. Risk assessment framework on time impact: Infrastructure projects in soft soil during construction stage

    Science.gov (United States)

    Low, W. W.; Wong, K. S.; Lee, J. L.

    2018-04-01

    With the growth of economy and population, there is an increase in infrastructure construction projects. As such, it is unavoidable to have construction projects on soft soil. Without proper risk management plan, construction projects are vulnerable to different types of risks which will have negative impact on project’s time, cost and quality. Literature review showed that little or none of the research is focused on the risk assessment on the infrastructure project in soft soil. Hence, the aim of this research is to propose a risk assessment framework in infrastructure projects in soft soil during the construction stage. This research was focused on the impact of risks on project time and internal risk factors. The research method was Analytical Hierarchy Process and the sample population was experienced industry experts who have experience in infrastructure projects. Analysis was completed and result showed that for internal factors, the five most significant risks on time element are lack of special equipment, potential contractual disputes and claims, shortage of skilled workers, delay/lack of materials supply, and insolvency of contractor/sub-contractor. Results indicated that resources risk factor play a critical role on project time frame in infrastructure projects in soft soil during the construction stage.

  2. Does perceived risk influence the effects of message framing? Revisiting the link between prospect theory and message framing.

    Science.gov (United States)

    Van 't Riet, Jonathan; Cox, Anthony D; Cox, Dena; Zimet, Gregory D; De Bruijn, Gert-Jan; Van den Putte, Bas; De Vries, Hein; Werrij, Marieke Q; Ruiter, Robert A C

    2016-12-01

    Health-promoting messages can be framed in terms of the beneficial consequences of healthy behaviour (gain-framed messages) or the detrimental consequences of unhealthy behaviour (loss-framed messages). An influential notion holds that the perceived risk associated with the recommended behaviour determines the relative persuasiveness of gain- and loss-framed messages. This 'risk-framing hypothesis', which was derived from prospect theory, has been central to health message-framing research for the better part of two decades and has enduring appeal to researchers and practitioners. It has found its way into several health communication handbooks and is communicated to the general public. The present article examines the validity of the risk-framing hypothesis anew by providing a review of the health message-framing literature. In spite of its ongoing appeal, we conclude that the hypothesis has severe theoretical flaws. In addition, we find that the empirical evidence in favour of the hypothesis is weak and inconsistent. It seems that, in applying prospect theory's tenets to a health-promotion context, some of the theory's key aspects have been lost in translation. At the close of the article, we offer a research agenda for the future, arguing that, above all, new methodology is needed to bring the message-framing literature further.

  3. Construction Guide to Next-Generation High-Performance Walls in Climate Zones 3-5 - Part 2: 2x4 Walls

    Energy Technology Data Exchange (ETDEWEB)

    Kochkin, V. [Home Innovation Research Labs, Upper Marlboro, MD (United States); Wiehagen, J. [Home Innovation Research Labs, Upper Marlboro, MD (United States)

    2017-06-01

    Part 2 of this Construction Guide to High-Performance Walls in Climate Zones 3-5 provides straightforward and cost-effective strategies to construct durable, energy-efficient walls. It addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low-rise residential buildings up to three stories high. Walls with 2x6 framing are addressed in Part 1 of the Guide.

  4. Construction Guide to Next-Generation High-Performance Walls in Climate Zones 3-5 - Part 2: 2x4 Walls

    Energy Technology Data Exchange (ETDEWEB)

    Kochkin, V. [Home Innovation Research Labs, Upper Marlboro, MD (United States); Wiehagen, J. [Home Innovation Research Labs, Upper Marlboro, MD (United States)

    2017-08-31

    Part 2 of this Construction Guide to High-Performance Walls in Climate Zones 3-5 provides straightforward and cost-effective strategies to construct durable, energy-efficient walls. It addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low-rise residential buildings up to three stories high. Walls with 2x6 framing are addressed in Part 1 of the Guide.

  5. REST-FRAME UV VERSUS OPTICAL MORPHOLOGIES OF GALAXIES USING SERSIC PROFILE FITTING: THE IMPORTANCE OF MORPHOLOGICAL K-CORRECTION

    International Nuclear Information System (INIS)

    Rawat, Abhishek; Wadadekar, Yogesh; De Mello, Duilia

    2009-01-01

    We show a comparison of the rest-frame UV morphologies of a sample of 162 intermediate-redshift (z median = 1.02) galaxies with their rest-frame optical morphologies. We select our sample from the deepest near-UV image obtained with the Hubble Space Telescope (HST) using the Wide Field Planetary Camera 2 (WFPC2; F300W) as part of the parallel observations of the Hubble Ultra Deep Field campaign overlapping with the HST/ACS Great Observatories Origins Deep Survey data set. We perform single-component Sersic fits in both WFPC2/F300W (rest-frame UV) and ACS/F850LP (rest-frame optical) bands and deduce that the Sersic index n is estimated to be smaller in the rest-frame UV compared to the rest-frame optical, leading to an overestimation of the number of merger candidates by ∼40%-100% compared to the rest-frame optical depending upon the cutoff in n employed for identifying merger candidates. This effect seems to be dominated by galaxies with low values of n(F300W) ≤ 0.5 that have a value of n(F850LP) ∼ 1.0. We argue that these objects are probably clumpy star-forming galaxies or minor mergers, both of which are essentially contaminants, if one is interested in identifying major mergers. In addition, we also find evidence that the axis ratio b/a is lower, i.e., ellipticity (1 - b/a) is higher in rest-frame UV compared to the rest-frame optical. Moreover, we find that in the rest-frame UV, the number of high ellipticity (e ≥ 0.8) objects are higher by a factor of ∼2.8 compared to the rest-frame optical. This indicates that the reported dominance of elongated morphologies among high-z Lyman Break Galaxies might just be a bias related to the use of rest-frame UV data sets in high-z studies.

  6. The Dynamics and Facilitation of a Living Lab Construct

    DEFF Research Database (Denmark)

    Brønnum, Louise; Nielsen, Louise Møller

    2013-01-01

    During the last decade Living Labs have established itself as an attractive innovation approach. Living Labs are an interesting construction because it offers a collaboration platform for dynamic interaction with users in all the project phases. Living Labs frame knowledge about actors in their o...

  7. Functions with disconnected spectrum sampling, interpolation, translates

    CERN Document Server

    Olevskii, Alexander M

    2016-01-01

    The classical sampling problem is to reconstruct entire functions with given spectrum S from their values on a discrete set L. From the geometric point of view, the possibility of such reconstruction is equivalent to determining for which sets L the exponential system with frequencies in L forms a frame in the space L^2(S). The book also treats the problem of interpolation of discrete functions by analytic ones with spectrum in S and the problem of completeness of discrete translates. The size and arithmetic structure of both the spectrum S and the discrete set L play a crucial role in these problems. After an elementary introduction, the authors give a new presentation of classical results due to Beurling, Kahane, and Landau. The main part of the book focuses on recent progress in the area, such as construction of universal sampling sets, high-dimensional and non-analytic phenomena. The reader will see how methods of harmonic and complex analysis interplay with various important concepts in different areas, ...

  8. Age differences in treatment decision making for breast cancer in a sample of healthy women: the effects of body image and risk framing.

    Science.gov (United States)

    Romanek, Kathleen M; McCaul, Kevin D; Sandgren, Ann K

    2005-07-01

    To examine the effects of age, body image, and risk framing on treatment decision making for breast cancer using a healthy population. An experimental 2 (younger women, older women) X 2 (survival, mortality frame) between-groups design. Midwestern university. Two groups of healthy women: 56 women ages 18-24 from undergraduate psychology courses and 60 women ages 35-60 from the university community. Healthy women imagined that they had been diagnosed with breast cancer and received information regarding lumpectomy versus mastectomy and recurrence rates. Participants indicated whether they would choose lumpectomy or mastectomy and why. Age, framing condition, treatment choice, body image, and reasons for treatment decision. The difference in treatment selection between younger and older women was mediated by concern for appearance. No main effect for risk framing was found; however, older women were somewhat less likely to select lumpectomy when given a mortality frame. Age, mediated by body image, influences treatment selection of lumpectomy versus mastectomy. Framing has no direct effect on treatment decisions, but younger and older women may be affected by risk information differently. Nurses should provide women who recently have been diagnosed with breast cancer with age-appropriate information regarding treatment alternatives to ensure women's active participation in the decision-making process. Women who have different levels of investment in body image also may have different concerns about treatment, and healthcare professionals should be alert to and empathetic of such concerns.

  9. Education and Decision-Making: An Experimental Study on the Framing Effect in China.

    Science.gov (United States)

    Fan, Wen

    2017-01-01

    China's higher education expansion policy has been in effect for almost two decades. Under this policy, a growing number of youths have gained access to higher education, which aims to train students to be more rational. This study examines human rationality at a Chinese college through an experiment based on the risky-choice framing effect. The basic results show no classical framing effect with regard to individual decisions for the entire sample in a benchmark setting. However, when the participants' roles were manipulated and subsamples were investigated, a significant framing effect was found that appeared to be role-related and that varied by sex. These results help to elucidate evaluations of the effects of China's higher education policy and may assist in guiding further policy reforms.

  10. High-frame-rate imaging of biological samples with optoacoustic micro-tomography

    Science.gov (United States)

    Deán-Ben, X. Luís.; López-Schier, Hernán.; Razansky, Daniel

    2018-02-01

    Optical microscopy remains a major workhorse in biological discovery despite the fact that light scattering limits its applicability to depths of ˜ 1 mm in scattering tissues. Optoacoustic imaging has been shown to overcome this barrier by resolving optical absorption with microscopic resolution in significantly deeper regions. Yet, the time domain is paramount for the observation of biological dynamics in living systems that exhibit fast motion. Commonly, acquisition of microscopy data involves raster scanning across the imaged volume, which significantly limits temporal resolution in 3D. To overcome these limitations, we have devised a fast optoacoustic micro-tomography (OMT) approach based on simultaneous acquisition of 3D image data with a high-density hemispherical ultrasound array having effective detection bandwidth around 25 MHz. We performed experiments by imaging tissue-mimicking phantoms and zebrafish larvae, demonstrating that OMT can provide nearly cellular resolution and imaging speed of 100 volumetric frames per second. As opposed to other optical microscopy techniques, OMT is a hybrid method that resolves optical absorption contrast acoustically using unfocused light excitation. Thus, no penetration barriers are imposed by light scattering in deep tissues, suggesting it as a powerful approach for multi-scale functional and molecular imaging applications.

  11. Pseudo-set framing.

    Science.gov (United States)

    Barasz, Kate; John, Leslie K; Keenan, Elizabeth A; Norton, Michael I

    2017-10-01

    Pseudo-set framing-arbitrarily grouping items or tasks together as part of an apparent "set"-motivates people to reach perceived completion points. Pseudo-set framing changes gambling choices (Study 1), effort (Studies 2 and 3), giving behavior (Field Data and Study 4), and purchase decisions (Study 5). These effects persist in the absence of any reward, when a cost must be incurred, and after participants are explicitly informed of the arbitrariness of the set. Drawing on Gestalt psychology, we develop a conceptual account that predicts what will-and will not-act as a pseudo-set, and defines the psychological process through which these pseudo-sets affect behavior: over and above typical reference points, pseudo-set framing alters perceptions of (in)completeness, making intermediate progress seem less complete. In turn, these feelings of incompleteness motivate people to persist until the pseudo-set has been fulfilled. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  12. Information Leakage from Logically Equivalent Frames

    Science.gov (United States)

    Sher, Shlomi; McKenzie, Craig R. M.

    2006-01-01

    Framing effects are said to occur when equivalent frames lead to different choices. However, the equivalence in question has been incompletely conceptualized. In a new normative analysis of framing effects, we complete the conceptualization by introducing the notion of information equivalence. Information equivalence obtains when no…

  13. Do framing effects reveal irrational choice?

    Science.gov (United States)

    Mandel, David R

    2014-06-01

    Framing effects have long been viewed as compelling evidence of irrationality in human decision making, yet that view rests on the questionable assumption that numeric quantifiers used to convey the expected values of choice options are uniformly interpreted as exact values. Two experiments show that when the exactness of such quantifiers is made explicit by the experimenter, framing effects vanish. However, when the same quantifiers are given a lower bound (at least) meaning, the typical framing effect is found. A 3rd experiment confirmed that most people spontaneously interpret the quantifiers in standard framing tests as lower bounded and that their interpretations strongly moderate the framing effect. Notably, in each experiment, a significant majority of participants made rational choices, either choosing the option that maximized expected value (i.e., lives saved) or choosing consistently across frames when the options were of equal expected value. PsycINFO Database Record (c) 2014 APA, all rights reserved.

  14. 49 CFR 230.106 - Steam locomotive frame.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Steam locomotive frame. 230.106 Section 230.106... Tenders Trucks, Frames and Equalizing System § 230.106 Steam locomotive frame. (a) Maintenance and inspection. Frames, decks, plates, tailpieces, pedestals, and braces shall be maintained in a safe and...

  15. Comparison of 16-frame and 8-frame gated SPET imaging for determination of left ventricular volumes and ejection fraction

    International Nuclear Information System (INIS)

    Navare, Sachin M.; Liu, Yi-Hwa; Wackers, Frans J.T.

    2003-01-01

    Electrocardiographic (ECG) gated single-photon emission tomography (SPET) allows for simultaneous assessment of myocardial perfusion and left ventricular (LV) function. Presently 8-frame per cardiac cycle ECG gating of SPET images is standard. The aim of this study was to compare the effect of 8-frame and 16-frame gated SPET on measurements of LV volumes and to evaluate the effects of the presence of myocardial perfusion defects and of radiotracer dose administered on the calculation of LV volumes. A total of 86 patients underwent technetium-99m SPET myocardial perfusion imaging using 16-frame per cardiac cycle acquisition. Eight-frame gated SPET images were generated by summation of contiguous frames. Left ventricular end-diastolic volume (EDV), end-systolic volume (ESV) and ejection fraction (EF) were calculated from the 16-frame and 8-frame data sets. The patients were divided into groups according to the administered dose of the radiotracer and the size of the perfusion defect. Results. Sixteen frame per cardiac cycle acquisition resulted in significantly larger EDV (122±72 ml vs 115±68 ml, P<0.0001), smaller ESV (64±58.6 ml vs 67.6±59.5 ml, P<0.0001), and higher LVEF (55.3%±18% vs 49%±17.4%, P<0.0001) as compared to 8-frame SPET imaging. This effect was seen regardless of whether a high or a low dose was administered and whether or not significant perfusion defects were present. This study shows that EDV, ESV and LVEF determined by 16-frame gated SPET are significantly different from those determined by 8-frame gated SPET. The radiotracer dose and perfusion defects do not affect estimation of LV parameters by 16-frame gated SPET. (orig.)

  16. Experimental investigation of the seismic performance of the R/C frames with reinforced masonry infills

    Science.gov (United States)

    Tanjung, Jafril; Maidiawati, Nugroho, Fajar

    2017-10-01

    Intensive studies regarding the investigation of seismic performance of reinforced concrete (R/C) frames which are infilled with brick masonry walls have been carried out by several researchers within the last three-decades. According to authors' field and experimentally experiences conclude that the unreinforced brick masonry infills significantly contributes to increase the seismic performance of the R/C frame structure. Unfortunately, the presence of brick masonry infill walls causes several undesirable effects such as short column, soft-storey, torsion and out of plane collapse. In this study, a strengthening technique for the brick masonry infills were experimentally investigated to improve the seismic performance of the R/C frame structures. For this purpose, four experimental specimens have been prepared, i.e. one of bare R/C frame (BF), one of R/C frame infilled with unreinforced brick-masonry wall (IFUM) and two of R/C frames were infilled with reinforced brick-masonry wall (IFRM-1 and IFRM-2). The bare frame and R/C frame infilled with unreinforced brick-masonry wall represents the typical R/C buildings' construction in Indonesia assuming the brick-masonry wall as the non-structural elements. The brick-masonry wall infills in specimens IFRM-1 and IFRM-2 were strengthened by using embedded ϕ4 plain steel bar on their diagonal and center of brick-masonry wall, respectively. All specimens were laterally pushed-over. The lateral loading and its lateral displacement, failure mechanism and their crack pattern were recorded during experimental works. Comparison of the experimental results of these four specimens conclude that the strengthening of the brick-masonry infills wall gave the significantly increasing of the seismic performance of the R/C frame. The seismic performance was evaluated based on the lateral strength of the R/C specimen. The embedded plain steel bar on brick-masonry also reduces the diagonal crack on the brick-masonry wall. It seems that

  17. Sparse feature learning for instrument identification: Effects of sampling and pooling methods.

    Science.gov (United States)

    Han, Yoonchang; Lee, Subin; Nam, Juhan; Lee, Kyogu

    2016-05-01

    Feature learning for music applications has recently received considerable attention from many researchers. This paper reports on the sparse feature learning algorithm for musical instrument identification, and in particular, focuses on the effects of the frame sampling techniques for dictionary learning and the pooling methods for feature aggregation. To this end, two frame sampling techniques are examined that are fixed and proportional random sampling. Furthermore, the effect of using onset frame was analyzed for both of proposed sampling methods. Regarding summarization of the feature activation, a standard deviation pooling method is used and compared with the commonly used max- and average-pooling techniques. Using more than 47 000 recordings of 24 instruments from various performers, playing styles, and dynamics, a number of tuning parameters are experimented including the analysis frame size, the dictionary size, and the type of frequency scaling as well as the different sampling and pooling methods. The results show that the combination of proportional sampling and standard deviation pooling achieve the best overall performance of 95.62% while the optimal parameter set varies among the instrument classes.

  18. Biologically aggressive regions within glioblastoma identified by spin-lock contrast T1 relaxation in the rotating frame (T1ρ MRI

    Directory of Open Access Journals (Sweden)

    Ramon Francisco Barajas, Jr., MD

    2017-12-01

    Full Text Available Spin-lattice relaxation in the rotating frame magnetic resonance imaging allows for the quantitative assessment of spin-lock contrast within tissues. We describe the utility of spin-lattice relaxation in the rotating frame metrics in characterizing glioblastoma biological heterogeneity. A 84-year-old man presented to our institution with a right frontal temporal mass. Prior tissue sampling from a peripheral nonenhancing lesion was nondiagnostic. Stereotactic image-guided tissue sampling of the nonenhancing T2-fluid-attenuated inversion recovery hyperintense region involving the anterior cingulate gyrus with elevated spin-lattice relaxation in the rotating frame metrics provided a pathologic diagnosis of glioblastoma. This case illustrates the utility of spin-lattice relaxation in the rotating frame magnetic resonance imaging in identifying biologically aggressive regions within glioblastoma.

  19. Personality construct of Sasang Personality Questionnaire in an adolescent sample

    Directory of Open Access Journals (Sweden)

    Han Chae

    2015-03-01

    Conclusion: The validity of the SPQ construct was confirmed with adolescents. Further investigation on its personality construct would extend the clinical application of SPQ to young age groups including children.

  20. Hydromechanical properties of some mortars used in some ecologic construction techniques

    OpenAIRE

    Hoxha , Dashnor; Vladimir Nicolae , Ungureanu; Belayachi , Naima; Duc Phi , Do

    2012-01-01

    International audience; This paper presents results of hydromechanical characterization tests performed on some mortars used in eco-construction practice. Typically, such mortars could be found in buildings constructed following so called GREB technique that uses straw bales as structural and insulating elements in addition to a wood frame. The full experimental program includes thermal, mechanical and hydraulic - hygroscopic tests. Mechanical tests, including uniaxial compression test and th...

  1. Coupling methods for multistage sampling

    OpenAIRE

    Chauvet, Guillaume

    2015-01-01

    Multistage sampling is commonly used for household surveys when there exists no sampling frame, or when the population is scattered over a wide area. Multistage sampling usually introduces a complex dependence in the selection of the final units, which makes asymptotic results quite difficult to prove. In this work, we consider multistage sampling with simple random without replacement sampling at the first stage, and with an arbitrary sampling design for further stages. We consider coupling ...

  2. Mixed-frame and stationary-frame repetitive control schemes for compensating typical load and grid harmonics

    DEFF Research Database (Denmark)

    Loh, P.; Tang, Y.; Blaabjerg, Frede

    2011-01-01

    In this study, repetitive current controllers operating in either the mixed or stationary frame are proposed for high-precision reference tracking and disturbance rejection of power converters. Both controllers use a proportional-resonant regulator in the stationary frame for regulating...... the positive- and negative-sequence fundamental currents, which are known to directly influence the flow of active and reactive power in most energy conversion systems. Moreover, for the tracking or compensation of harmonics, the controllers include a repetitive control path in either the synchronous...... or stationary frame, whose inherent feedback and feedforward structure is proven to resemble a bank of resonant filters in either reference frames. Unlike other existing controllers, the proposed repetitive controllers function by introducing multiple resonant peaks at only those harmonic frequencies typically...

  3. Uncovering Discursive Framings of the Bangladesh Shipbreaking Industry

    Directory of Open Access Journals (Sweden)

    S. M. Mizanur Rahman

    2018-01-01

    Full Text Available Shipbreaking in the Chittagong region of Bangladesh supplies metal to meet the needs of the nation’s construction sector. The shipbreaking industry has received international attention for environmental contamination and workers’ insecurity. However, these issues have been framed without considering the actors that produce them and their associated motives. This paper illuminates the conflicting discourses regarding the industry between two divergent groups of actors. On the one hand, national and international NGOs collaborate to enforce a discourse focused on negative localized impacts. On the other hand, yard owners, yard workers, and local community members forge a counter discourse, focused on positive localized impacts and raising doubts about the origin of the environmental pollutants and occupational standards setting. National and international actors have so far missed the conflicting perspective of workers, yard owners, locals and NGOs. We contend that these divergent discourses involve scalar politics, with one discursive frame focused on localized impacts in order to leverage global resources, while the other situates local communities in the global world system; this confounding of scale leads to ineffective policy formulation. This shipbreaking case study provides a valuable lesson on the importance of listening to and including stakeholders at multiple scales when seeking policies to address localized impacts of a globalized industry.

  4. Sparsity and spectral properties of dual frames

    DEFF Research Database (Denmark)

    Krahmer, Felix; Kutyniok, Gitta; Lemvig, Jakob

    2013-01-01

    We study sparsity and spectral properties of dual frames of a given finite frame. We show that any finite frame has a dual with no more than $n^2$ non-vanishing entries, where $n$ denotes the ambient dimension, and that for most frames no sparser dual is possible. Moreover, we derive an expressio...

  5. "Think" versus "feel" framing effects in persuasion.

    Science.gov (United States)

    Mayer, Nicole D; Tormala, Zakary L

    2010-04-01

    Three studies explored think ("I think . . . ") versus feel ("I feel . . . ") message framing effects on persuasion.The authors propose a matching hypothesis, suggesting that think framing will be more persuasive when the target attitude or message recipient is cognitively oriented, whereas feel framing will be more persuasive when the target attitude or message recipient is affectively oriented. Study 1 presented cognitively and affectively oriented individuals with a think- or feel-framed message. Study 2 primed cognitive or affective orientation and then presented a think- or feel-framed message. Study 3 presented male and female participants with an advertisement containing think- or feel-framed arguments. Results indicated that think (feel) framing was more persuasive when the target attitude or recipient was cognitively (affectively) oriented. Moreover, Study 2 demonstrated that this matching effect was mediated by processing fluency. Theoretical and practical implications are discussed.

  6. Design and Construction of Pool Door for Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Kwangsub; Lee, Sangjin; Choi, Jinbok; Oh, Jinho; Lee, Jongmin [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    The pool door is a structure to isolate the reactor pool from the service pool for maintenance. The pool door is installed before the reactor pool is drained. The pool door consists of structural component and sealing component. The main structures of the pool door are stainless steel plates and side frames. The plates and frames are assembled by welded joints. Lug is welded at the top of the plate. The pool door is submerged in the pool water when it is used. Materials of the pool door should be resistive to corrosion and radiation. Stainless steel is used in structural components and air nozzle assemblies. Features of design and construction of the pool door for the research reactor are introduced. The pool door is designed to isolate the reactor pool for maintenance. Structural analysis is performed to evaluate the structural integrity during earthquake. Tests and inspections are also carried out during construction to identify the safety and function of the pool door.

  7. Design and Construction of Pool Door for Research Reactor

    International Nuclear Information System (INIS)

    Jung, Kwangsub; Lee, Sangjin; Choi, Jinbok; Oh, Jinho; Lee, Jongmin

    2016-01-01

    The pool door is a structure to isolate the reactor pool from the service pool for maintenance. The pool door is installed before the reactor pool is drained. The pool door consists of structural component and sealing component. The main structures of the pool door are stainless steel plates and side frames. The plates and frames are assembled by welded joints. Lug is welded at the top of the plate. The pool door is submerged in the pool water when it is used. Materials of the pool door should be resistive to corrosion and radiation. Stainless steel is used in structural components and air nozzle assemblies. Features of design and construction of the pool door for the research reactor are introduced. The pool door is designed to isolate the reactor pool for maintenance. Structural analysis is performed to evaluate the structural integrity during earthquake. Tests and inspections are also carried out during construction to identify the safety and function of the pool door

  8. Construction method of pre assembled unit of bolt sphere grid

    Science.gov (United States)

    Hu, L. W.; Guo, F. L.; Wang, J. L.; Bu, F. M.

    2018-03-01

    The traditional construction of bolt sphere grid has many disadvantages, such as high cost, large amount of work at high altitude and long construction period, in order to make up for these shortcomings, in this paper, a new and applicable construction method is explored: setting up local scaffolding, installing the bolt sphere grid starting frame on the local scaffolding, then the pre assembled unit of bolt sphere grid is assembled on the ground, using small hoisting equipment to lift pre assembled unit to high altitude and install. Compared with the traditional installation method, the construction method has strong practicability and high economic efficiency, and has achieved good social and economic benefits.

  9. Military construction program economic analysis manual: Sample economic analyses: Hazardous Waste Remedial Actions Program

    International Nuclear Information System (INIS)

    1987-12-01

    This manual enables the US Air Force to comprehensively and systematically analyze alternative approaches to meeting its military construction requirements. The manual includes step-by-step procedures for completing economic analyses for military construction projects, beginning with determining if an analysis is necessary. Instructions and a checklist of the tasks involved for each step are provided; and examples of calculations and illustrations of completed forms are included. The manual explains the major tasks of an economic analysis, including identifying the problem, selecting realistic alternatives for solving it, formulating appropriate assumptions, determining the costs and benefits of the alternatives, comparing the alternatives, testing the sensitivity of major uncertainties, and ranking the alternatives. Appendixes are included that contain data, indexes, and worksheets to aid in performing the economic analyses. For reference, Volume 2 contains sample economic analyses that illustrate how each form is filled out and that include a complete example of the documentation required

  10. Thinking inside the frame: A framing analysis of the humanities in Danish print news media.

    Science.gov (United States)

    Knudsen, Sanne

    2017-11-01

    The humanities, the natural and social sciences all represent advanced and systematic knowledge production-and they all receive public funding for doing so. However, although the field of public understanding of science has been well established for decades, similar research attention has not been directed at the humanities. The purpose of this study is to argue the case for further research of public understanding of the humanities and to take a first step in that direction by presenting a study of the framing of the humanities in Danish print news media. Different framings of the humanities are analyzed. Despite the differences in the issue-specific frames, the generic framing of the humanities shared by most articles is as follows: 75% explicitly frame the humanities as deficit, while the remaining 25% are more neutral. Consequently, if newspapers constitute the only source of information concerning the humanities, newsreaders may not be much wiser in understanding what the humanities might be-but they will know that whatever the humanities is, it is broken and useless.

  11. Evaluation and the Framing of Race

    Science.gov (United States)

    House, Ernest R.

    2017-01-01

    Racial framing can have strong effects on programs, policies, and even evaluations. Racial framing developed as a justification for the exploitation of minorities and has been a primary causal factor in the persistence of racism. By being aware of its pattern, structure, origins, and how racial framing generates effects, we can significantly…

  12. 10 CFR 710.35 - Time frames.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Time frames. 710.35 Section 710.35 Energy DEPARTMENT OF... Matter or Special Nuclear Material Miscellaneous § 710.35 Time frames. Statements of time established for processing aspects of a case under this subpart are the agency's desired time frames in implementing the...

  13. 21 CFR 886.5842 - Spectacle frame.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Spectacle frame. 886.5842 Section 886.5842 Food... DEVICES OPHTHALMIC DEVICES Therapeutic Devices § 886.5842 Spectacle frame. (a) Identification. A spectacle frame is a device made of metal or plastic intended to hold prescription spectacle lenses worn by a...

  14. Framing financial culture

    DEFF Research Database (Denmark)

    Just, Sine Nørholm; Mouton, Nicolaas T.O.

    2014-01-01

    between competing frames leads to the conclusion that this political “blame game” is related to struggles over how to define the scandal, how to conceptualize its causes, and policy recommendations. Banks may have lost the battle of “Liborgate,” but the war over the meaning of financial culture is far...... from over. Originality/value – The paper is theoretically and methodologically original in its combination of the theories of framing and stasis, and it provides analytical insights into how sense is made of financial culture in the wake of the financial crisis....

  15. Construction dispute research conceptualisation, avoidance and resolution

    CERN Document Server

    2014-01-01

    There are three specific purposes of Construction Dispute Research. First, this volume aims to summarise studies on construction dispute. Second, apart from the theoretical constructs, where appropriate empirical tests are also included. This approach serves to go beyond the commonly used anecdotal approach for the subject matters. Third, it is the sincere hope of the authors that this book will help shaping research agenda of construction dispute.  The studies are mostly framed from a management perspective drawing on methods and concepts in contract law, economics, psychology and management science.   The book has twenty chapters that are arranged in four parts covering conceptualisation, avoidance, negotiation and mediation. Part 1 is devoted for dispute conceptualisation. A building is only as strong as its foundation. Thus it is no better start to study construction dispute by conceptualisation. The theme of Part 2 is dispute avoidance. The conventional wisdom of ‘prevention is better than cure’ se...

  16. Towards a poetics of the cinematographic frame

    Directory of Open Access Journals (Sweden)

    Des O'Rawe

    2011-05-01

    Full Text Available In delineating a poetics of the cinematographic frame, this essay presents a typology of framing styles, and demonstrates ways in which filmmakers use the frame as an expressive resource—and ways in which the frame uses them. The examples discussed are modernist in orientation, and each has a particular association with a city—its history, architecture, and cultural character. Although it is common practice to refer to various—especially, modernist—framing situations as instances of deframing, the essay also enquires into the problematic nature of this term, suggesting alternative visual and cinematographic contexts more amenable to the deconstructive implications of this term. As the boundaries between cinema and the other arts continue to converge and relations between frame, image, and screen become more complex, this essay offers a reassessment of some first principles of film language, especially the aesthetic integrity of the cinematographic frame.

  17. Inertial reference frames and gravitational forces

    International Nuclear Information System (INIS)

    Santavy, I.

    1981-01-01

    The connection between different definitions of inertial, i.e. fundamental, reference frames and the corresponding characterisation of gravitational fields by gravitational forces are considered from the point of view of their possible interpretation in university introductory courses. The introduction of a special class of reference frames, denoted 'mixed reference frames' is proposed and discussed. (author)

  18. Field – Football Expressions Dictionary: a lexicographic resource based on the theoretical-methodological approach of frame semantics and corpus linguistics

    Directory of Open Access Journals (Sweden)

    Rove Luiza de Oliveira Chishman

    2015-01-01

    Full Text Available The present article aims at problematizing the relevance of Frame Semantics (Fillmore, 1982 in the development of Field – Dictionary of Football Expressions – which the configuration allows the access to football language through expressions or through scenarios – or semantic frames. Frame Semantics, a theory developed in the realm of Cognitive Linguistics, is based on empirical data collected from the analysis of electronic corpora. The extraction of the data presented in this study was done with the Sketch Engine concordance, while their analysis was relegated to Frame Semantics. Among the results, it is possible to point out at the manner in which Fillmore´s theory contributes to the analysis of polysemy, presenting the different senses of a lexical unit considering different situations – or different frames – in which they appear. This article also emphasizes the pertinence of corpus linguistics and the processing of corpora as resources that allow the analysis of linguistic constructs present in the texts. It is also important to emphasize the applicability of Frame Semantics to a resource devoted to a non-specialized public, once the theory makes the contextualization of language possible through the everyday routine of the speakers.

  19. Symmetries of collective models in intrinsic frame

    International Nuclear Information System (INIS)

    Gozdz, A.; Pedrak, A.; Szulerecka, A.; Dobrowolski, A.; Dudek, J.

    2013-01-01

    In the paper a very general definition of intrinsic frame, by means of group theoretical methods, is introduced. It allows to analyze nuclear properties which are invariant in respect to the group which defines the intrinsic frame. For example, nuclear shape is a well determined feature in the intrinsic frame defined by the Euclidean group. It is shown that using of intrinsic frame gives an opportunity to consider intrinsic nuclear symmetries which are independent of symmetries observed in the laboratory frame. An importance of the notion of partial symmetries is emphasized. (author)

  20. News framing and public opinion: A mediation analysis of framing effects on political attitudes

    NARCIS (Netherlands)

    Lecheler, S.K.; de Vreese, C.H.

    2012-01-01

    There is no satisfactory account of the psychological processes that mediate a news framing effect. Based on an experimental study (N = 1,537), this article presents a mediation analysis of a news framing effect on opinion, testing for two important mediation processes: belief importance and belief

  1. Composite structures of steel and concrete beams, slabs, columns, and frames for buildings

    CERN Document Server

    Johnson, R P

    2008-01-01

    This book sets out the basic principles of composite construction with reference to beams, slabs, columns and frames, and their applications to building structures. It deals with the problems likely to arise in the design of composite members in buildings, and relates basic theory to the design approach of Eurocodes 2, 3 and 4.The new edition is based for the first time on the finalised Eurocode for steel/concrete composite structures.

  2. Some equalities and inequalities for fusion frames

    OpenAIRE

    Guo, Qianping; Leng, Jinsong; Li, Houbiao

    2016-01-01

    Fusion frames have some properties similar to those of frames in Hilbert spaces, but not all of their properties are similar. Some authors have established some equalities and inequalities for conventional frames. In this paper, we give some equalities and inequalities for fusion frames. Our results generalize and improve the remarkable results which have been obtained by Balan, Casazza and G?vruta etc.

  3. Education and Decision-Making: An Experimental Study on the Framing Effect in China

    Directory of Open Access Journals (Sweden)

    Wen Fan

    2017-05-01

    Full Text Available China’s higher education expansion policy has been in effect for almost two decades. Under this policy, a growing number of youths have gained access to higher education, which aims to train students to be more rational. This study examines human rationality at a Chinese college through an experiment based on the risky-choice framing effect. The basic results show no classical framing effect with regard to individual decisions for the entire sample in a benchmark setting. However, when the participants’ roles were manipulated and subsamples were investigated, a significant framing effect was found that appeared to be role-related and that varied by sex. These results help to elucidate evaluations of the effects of China’s higher education policy and may assist in guiding further policy reforms.

  4. Machine Learning for Slow but Steady Interplanetary Construction

    Science.gov (United States)

    Agogino, Adrian

    2017-01-01

    For prolonged manned missions to destinations such as the moon and Mars, there is a need for significant infrastructure construction ahead of time, such as habitats and landing pads. Unfortunately we have little experience in remote construction and using conventional methods is likely to be expensive, cumbersome and unreliable. Fortunately these challenges may be overcome by taking advantage of the long lead time for such missions and using teams of small and slow construction robots. We propose using teams of simple autonomous robots for this purpose that would perform continuous construction over a period of many years or even decades. While individual robot reliability will be low over such long time frames, system reliability will be maintained by using machine learning over simulations to achieve coordination and reconfigurations in the event of lost robots.

  5. Does perceived risk influence the effects of message framing? Revisiting the link between prospect theory and message framing

    NARCIS (Netherlands)

    Riet, J.P. van 't; Cox, A.D.; Cox, D.; Zimet, G.D.; Bruijn, G.J. de; Putte, B. van den; Vries, H. de; Werrij, M.Q.; Ruiter, R.A.C.

    2016-01-01

    Health-promoting messages can be framed in terms of the beneficial consequences of healthy behaviour (gain-framed messages) or the detrimental consequences of unhealthy behaviour (loss-framed messages). An influential notion holds that the perceived risk associated with the recommended behaviour

  6. Soil Characterization by Large Scale Sampling of Soil Mixed with Buried Construction Debris at a Former Uranium Fuel Fabrication Facility

    International Nuclear Information System (INIS)

    Nardi, A.J.; Lamantia, L.

    2009-01-01

    Recent soil excavation activities on a site identified the presence of buried uranium contaminated building construction debris. The site previously was the location of a low enriched uranium fuel fabrication facility. This resulted in the collection of excavated materials from the two locations where contaminated subsurface debris was identified. The excavated material was temporarily stored in two piles on the site until a determination could be made as to the appropriate disposition of the material. Characterization of the excavated material was undertaken in a manner that involved the collection of large scale samples of the excavated material in 1 cubic meter Super Sacks. Twenty bags were filled with excavated material that consisted of the mixture of both the construction debris and the associated soil. In order to obtain information on the level of activity associated with the construction debris, ten additional bags were filled with construction debris that had been separated, to the extent possible, from the associated soil. Radiological surveys were conducted of the resulting bags of collected materials and the soil associated with the waste mixture. The 30 large samples, collected as bags, were counted using an In-Situ Object Counting System (ISOCS) unit to determine the average concentration of U-235 present in each bag. The soil fraction was sampled by the collection of 40 samples of soil for analysis in an on-site laboratory. A fraction of these samples were also sent to an off-site laboratory for additional analysis. This project provided the necessary soil characterization information to allow consideration of alternate options for disposition of the material. The identified contaminant was verified to be low enriched uranium. Concentrations of uranium in the waste were found to be lower than the calculated site specific derived concentration guideline levels (DCGLs) but higher than the NRC's screening values. The methods and results are presented

  7. Parametric Study Of Window Frame Geometry

    DEFF Research Database (Denmark)

    Zajas, Jan Jakub; Heiselberg, Per

    2013-01-01

    This paper describes a parametric study on window frame geometry with the goal of designing frames with very good thermal properties. Three different parametric frame models are introduced, deseribed by a number of variables. In the first part of the study, a process of sensitivity analysis...... is conducted to determine which of the parameters describing the frame have the highest impact on its thermal performance. Afterwards, an optimization process is conducted on each frame in order to optimize the design with regard to three objectives: minimizing the thermal transmittance, maxim izing the net...... energy gain factor and minimizing the material use. Since the objectives contradiet each other, it was found that it is not possible to identifY a single solution that satisfies all these goals. lnstead, a compromise between the objectives has to be found....

  8. FishFrame

    DEFF Research Database (Denmark)

    Degel, Henrik; Jansen, Teunis

    2006-01-01

    . Development and test of software modules can be done once and reused by all. The biggest challenge in this is not technical – it is in organisation, coordination and trust. This challenge has been addressed by FishFrame - a web-based datawarehouse application. The “bottom-up” approach with maximum involvement...... of end users from as many labs and user groups as possible has been rather slow but quite successful in building international trust and cooperation around the system. This is mandatory prerequisites when our primary goal is not the programming project itself, but the creation of a tool that adds real...... value to users and in the end improves the way we work with our data. FishFrame version 4.2 is presented and the lessons learned from the process are discussed....

  9. Framing effect debiasing in medical decision making.

    Science.gov (United States)

    Almashat, Sammy; Ayotte, Brian; Edelstein, Barry; Margrett, Jennifer

    2008-04-01

    Numerous studies have demonstrated the robustness of the framing effect in a variety of contexts. The present study investigated the effects of a debiasing procedure designed to prevent the framing effect for young adults who made decisions based on hypothetical medical decision-making vignettes. The debiasing technique involved participants listing advantages and disadvantages of each treatment prior to making a choice. One hundred and two undergraduate students read a set of three medical treatment vignettes that presented information in terms of different outcome probabilities under either debiasing or control conditions. The framing effect was demonstrated by the control group in two of the three vignettes. The debiasing group successfully avoided the framing effect for both of these vignettes. These results further support previous findings of the framing effect as well as an effective debiasing technique. This study improved upon previous framing debiasing studies by including a control group and personal medical scenarios, as well as demonstrating debiasing in a framing condition in which the framing effect was demonstrated without a debiasing procedure. The findings suggest a relatively simple manipulation may circumvent the use of decision-making heuristics in patients.

  10. Effect of framing on adolescents' decision making.

    Science.gov (United States)

    Chien, Y C; Lin, C; Worthley, J

    1996-12-01

    92 young adolescents were tested using Tversky and Kahneman's (1981) decision problems for framing effects. A notable number of young adolescents tested were not influenced by the context of the decision problems, thus they selected the same response option for positively and negatively framed problems. Parallel information was not available in Tversky and Kahneman's study for adults because they used a between-subjects design. However, for present adolescents who selected different response options for different framing problems, the response pattern exhibited by them resembled the general pattern exhibited by the adults tested in Tversky and Kahneman's study-negative frames led them to accept risk to avoid certain loss; positive frames prevented them from risking what they were certain to gain. Boys and girls were similar in their susceptibility to framing effects as were honors students in mathematics as compared to nonhonors students. Although the positive vs negative framing only influenced some of the young adolescents tested in this study, because the influence was consistent, researchers and educators interested in adolescents' decisions involving risky choices might use framing principles to design and assess cognitive interventions for high-risk behaviors among young adolescents.

  11. On Λ-Type Duality of Frames in Banach Spaces

    Directory of Open Access Journals (Sweden)

    Renu Chugh

    2013-11-01

    Full Text Available Frames are redundant system which are useful in the reconstruction of certain classes of spaces. The dual of a frame (Hilbert always exists and can be obtained in a natural way. Due to the presence of three Banach spaces in the definition of retro Banach frames (or Banach frames duality of frames in Banach spaces is not similar to frames for Hilbert spaces. In this paper we introduce the notion of Λ-type duality of retro Banach frames. This can be generalized to Banach frames in Banach spaces. Necessary and sufficient conditions for the existence of the dual of retro Banach frames are obtained. A special class of retro Banach frames which always admit a dual frame is discussed.

  12. Temporal Consequences, Message Framing, and Consideration of Future Consequences: Persuasion Effects on Adult Fruit Intake Intention and Resolve.

    Science.gov (United States)

    de Bruijn, Gert-Jan; Budding, Jeen

    2016-08-01

    Message framing is a persuasive strategy that has seen mixed evidence for promoting fruit intake intentions, potentially because framed messages for fruit intake have not (a) explicitly compared short-term consequences versus long-term consequences, (b) considered individual-level differences in time perspective, and (c) used alternative measures of fruit intake intentions. In the present online study, the effects of persuasive messages created from temporal context (short term vs. long term) and message frame (gain framed vs. loss framed) were investigated on fruit intake intentions and resolve among a sample of Dutch adults who were categorized as either present oriented or future oriented. For intention and resolve, results showed a significant Type of Frame × Type of Temporal Context interaction, such that gain-framed messages were more persuasive when combined with long-term consequences and loss-framed messages were more persuasive when combined with short-term consequences. The effect sizes for these differences were similar for resolve and intention, but only differences for intentions were significant. No other effects were found. These results demonstrate that message framing theory may usefully consider the inclusion of temporal context of outcomes and alternative motivation measures to maximize their persuasive effects.

  13. Effect of cladding systems on moisture performance of wood-framed walls in a mixed-humid climate

    Science.gov (United States)

    S. Craig Drumheller; Charles G. Carll

    2010-01-01

    A 22-month field investigation of nine different north-and south-oriented wood-framed wall assemblies was conducted to determine the moisture performance of various wall construction types, most of which incorporated absorptive cladding. The study was conducted on the campus of the National Association of Home Builders (NAHB) Research Center, in Upper Marlboro, MD, 20...

  14. Optical loop framing

    International Nuclear Information System (INIS)

    Kalibjian, R.; Chong, Y.P.; Prono, D.S.; Cavagnolo, H.R.

    1984-06-01

    The ATA provides an electron beam pulse of 70-ns duration at a 1-Hz rate. Our present optical diagnostics technique involve the imaging of the visible light generated by the beam incident onto the plant of a thin sheet of material. It has already been demonstrated that the light generated has a sufficiently fast temporal reponse in performing beam diagnostics. Notwithstanding possible beam emittance degradation due to scattering in the thin sheet, the observation of beam spatial profiles with relatively high efficiencies has provided data complementary to that obtained from beam wall current monitors and from various x-ray probes and other electrical probes. The optical image sensor consists of a gated, intensified television system. The gate pulse of the image intensifier can be appropriately delayed to give frames that are time-positioned from the head to the tail of the beam with a minimum gate time of 5-ns. The spatial correlation of the time frames from pulse to pulse is very good for a stable electron beam; however, when instabilities do occur, it is difficult to properly assess the spatial composition of the head and the tail of the beam on a pulse-to-pulse basis. Multiple gating within a pulse duration becomes desirable but cannot be performed because the recycle time (20-ms) of the TV system is much longer than the beam pulse. For this reason we have developed an optical-loop framing technique that will allow the recording of two frames within one pulse duration with our present gated/intensified TV system

  15. Design and construction of an in-pipe robot for inspection and maintenance

    KAUST Repository

    Sibai, Fadi N.; Sayegh, Amer Ahmed; Al-Taie, Ihsan

    2012-01-01

    Inspection and maintenance of aging pipelines is crucial to the reliable and continued distribution of hydrocarbons. In this paper, we describe the design and construction of a robotic platform for inspection and minor maintenance of pipelines. The 7.5 kg robotic platform was demonstrated to move straight inside 12″ to 16″ diameter pipes in a forward or backward direction, and either horizontally or vertically. The experimental robotic platform has three sets of two wheels, and three driving motors. The equations governing the mechanical frame's component sizes are presented and the robotic frame component dimensions derived. The paper also discusses the construction and testing of the robot. Future work includes adding sensors, controls for turning, a microcontroller board, and a robotic arm for performing maintenance tasks. © 2012 IEEE.

  16. Application of tuned mass dampers in high-rise construction

    Science.gov (United States)

    Teplyshev, Vyacheslav; Mylnik, Alexey; Pushkareva, Maria; Agakhanov, Murad; Burova, Olga

    2018-03-01

    The article considers the use of tuned mass dampers in high-rise construction for significant acceleration and amplitude of vibrations of the upper floors under dynamic wind influences. The susceptibility of people to accelerations in high-rise buildings and possible means of reducing wind-induced fluctuations in buildings are analyzed. The statistics of application of tuned mass dampers in high-rise construction all over the world is presented. The goal of the study is to identify an economically attractive solution that allows the fullest use of the potential of building structures in high-rise construction, abandoning the need to build massive frames leading to over-consumption of materials.

  17. On the certification of forest concession: non-governmental organizations, enterprises, and the construction of a new institutional frame for the development of the lumber industry in the Brazilian Amazon

    Directory of Open Access Journals (Sweden)

    Marcelo Sampaio Carneiro

    2011-12-01

    Full Text Available The article discusses the construction process of forest certification in the Brazilian Amazon, emphasizing its importance for the new frame of lumber industry on that region. We sustain that one of the main results of the promotion of forest certification by the Forest Stewardship Council (FSC in Amazon was the constitution of an alliance between the environmentalist Non-Governmental Organizations, representative segments of forest business and members of the state bureaucracy for the promotion of lumber exploration based on forest management. In this perspective, the results produced by certification must be understood as part of a process of promotion of forest resources access policies, such as the approval of the Public Forests Management Law, and the creation of state entities destined to the promotion of lumber extraction on Amazon.

  18. Timber frame walls

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan de Place; Brandt, Erik

    2010-01-01

    A ventilated cavity is usually considered good practice for removing moisture behind the cladding of timber framed walls. Timber frame walls with no cavity are a logical alternative as they are slimmer and less expensive to produce and besides the risk of a two-sided fire behind the cladding....... It was found that the specific damages made to the vapour barrier as part of the test did not have any provable effect on the moisture content. In general elements with an intact vapour barrier did not show a critical moisture content at the wind barrier after four years of exposure....

  19. Video frame processor

    International Nuclear Information System (INIS)

    Joshi, V.M.; Agashe, Alok; Bairi, B.R.

    1993-01-01

    This report provides technical description regarding the Video Frame Processor (VFP) developed at Bhabha Atomic Research Centre. The instrument provides capture of video images available in CCIR format. Two memory planes each with a capacity of 512 x 512 x 8 bit data enable storage of two video image frames. The stored image can be processed on-line and on-line image subtraction can also be carried out for image comparisons. The VFP is a PC Add-on board and is I/O mapped within the host IBM PC/AT compatible computer. (author). 9 refs., 4 figs., 19 photographs

  20. Constructive Preference Elicitation

    Directory of Open Access Journals (Sweden)

    Paolo Dragone

    2018-01-01

    Full Text Available When faced with large or complex decision problems, human decision makers (DM can make costly mistakes, due to inherent limitations of their memory, attention, and knowledge. Preference elicitation tools assist the decision maker in overcoming these limitations. They do so by interactively learning the DM’s preferences through appropriately chosen queries and suggesting high-quality outcomes based on the preference estimates. Most state-of-the-art techniques, however, fail in constructive settings, where the goal is to synthesize a custom or entirely novel configuration rather than choosing the best option among a given set of candidates. Many wide-spread problems are constructive in nature: customizing composite goods such as cars and computers, bundling products, recommending touristic travel plans, designing apartments, buildings, or urban layouts, etc. In these settings, the full set of outcomes is humongous and can not be explicitly enumerated, and the solution must be synthesized via constrained optimization. In this article, we describe recent approaches especially designed for constructive problems, outlining the underlying ideas and their differences as well as their limitations. In presenting them, we especially focus on novel issues that the constructive setting brings forth, such as how to deal with sparsity of the DM’s preferences, how to properly frame the interaction, and how to achieve efficient synthesis of custom instances.

  1. Framing matters: Effects of framing on older adults’ exploratory decision-making

    Science.gov (United States)

    Cooper, Jessica A.; Blanco, Nathaniel; Maddox, W. Todd

    2016-01-01

    We examined framing effects on exploratory decision-making. In Experiment 1 we tested older and younger adults in two decision-making tasks separated by one week, finding that older adults’ decision-making performance was preserved when maximizing gains, but declined when minimizing losses. Computational modeling indicates that younger adults in both conditions, and older adults in gains-maximization, utilized a decreasing threshold strategy (which is optimal), but older adults in losses were better fit by a fixed-probability model of exploration. In Experiment 2 we examined within-subjects behavior in older and younger adults in the same exploratory decision-making task, but without a time separation between tasks. We replicated the older adult disadvantage in loss-minimization from Experiment 1, and found that the older adult deficit was significantly reduced when the loss-minimization task immediately followed the gains-maximization task. We conclude that older adults’ performance in exploratory decision-making is hindered when framed as loss-minimization, but that this deficit is attenuated when older adults can first develop a strategy in a gains-framed task. PMID:27977218

  2. Survival or Mortality: Does Risk Attribute Framing Influence Decision-Making Behavior in a Discrete Choice Experiment?

    Science.gov (United States)

    Veldwijk, Jorien; Essers, Brigitte A B; Lambooij, Mattijs S; Dirksen, Carmen D; Smit, Henriette A; de Wit, G Ardine

    2016-01-01

    To test how attribute framing in a discrete choice experiment (DCE) affects respondents' decision-making behavior and their preferences. Two versions of a DCE questionnaire containing nine choice tasks were distributed among a representative sample of the Dutch population aged 55 to 65 years. The DCE consisted of four attributes related to the decision regarding participation in genetic screening for colorectal cancer (CRC). The risk attribute included was framed positively as the probability of surviving CRC and negatively as the probability of dying from CRC. Panel mixed-logit models were used to estimate the relative importance of the attributes. The data of the positively and negatively framed DCE were compared on the basis of direct attribute ranking, dominant decision-making behavior, preferences, and importance scores. The majority (56%) of the respondents ranked survival as the most important attribute in the positively framed DCE, whereas only a minority (8%) of the respondents ranked mortality as the most important attribute in the negatively framed DCE. Respondents made dominant choices based on survival significantly more often than based on mortality. The framing of the risk attribute significantly influenced all attribute-level estimates and resulted in different preference structures among respondents in the positively and negatively framed data set. Risk framing affects how respondents value the presented risk. Positive risk framing led to increased dominant decision-making behavior, whereas negative risk framing led to risk-seeking behavior. Attribute framing should have a prominent part in the expert and focus group interviews, and different types of framing should be used in the pilot version of DCEs as well as in actual DCEs to estimate the magnitude of the effect of choosing different types of framing. Copyright © 2016 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  3. Journalism Curiosity and Story Telling Frame

    DEFF Research Database (Denmark)

    Grunwald, Ebbe; Rupar, Verica

    2009-01-01

    This comparative study of journalism practices in Australia and Denmark explores the interplay between two concepts relevant for journalism's meaning-making activity: a curiosity seen as an action meant to close an information gap, and a story telling frame seen as a form of structuring information...... the epistemological and organisational dimension of frames relates to the process of  meaning-making. We suggest refining the concept of frame in journalism studies by making a distinction between a frame (an epistemological category) and an angle (a textual organisation category). Our investigation shows...... that this distinction better serves the analysis and understanding of the mechanisms behind journalism in comparative contexts. Udgivelsesdato: December...

  4. Framing Child Sexual Abuse: A Longitudinal Content Analysis of Newspaper and Television Coverage, 2002-2012.

    Science.gov (United States)

    Weatherred, Jane Long

    2017-01-01

    The way in which the news media frame child sexual abuse can influence public perception. This content analysis of the child sexual abuse coverage of eight national news organizations in the United States from 2002 to 2012 includes the two dominant events of the Catholic Church and Pennsylvania State University child sexual abuse scandals. Census and systematic stratified sampling techniques were applied to articles obtained from the Lexis/Nexis Academic database, resulting in a sample of 503 articles. Intercoder reliability was ensured by double coding a randomly selected sample. Study findings indicate a shift in the attribution of responsibility of child sexual abuse among news organizations over the past decade from an individual-level problem with individual-level solutions to a societal-level problem with institutional culpability. Nevertheless, individual-level solutions continue to be framed as the best possible solution.

  5. Factors associated with the severity of fatal accidents in construction workers.

    Science.gov (United States)

    Khodabandeh, Farideh; Kabir-Mokamelkhah, Elaheh; Kahani, Mahsa

    2016-01-01

    Background: Construction work (building houses, roads, workplaces, and repairing and maintaining infrastructures) is a dangerous land-based job. This includes many hazardous tasks and conditions such as working at the following conditions: Height, excavation, noise, dust, power tools and equipment. Construction work has been increased in developed and underdeveloped countries over the past few years. Occupational fatalities have increased with an increase in this type of work. Occupational fatalities refer to individuals who pass way while on the job or performing work related tasks. In the present study, to identify the factors, personal characteristics and work-related factors associated with fatal occupational mortality were assessed using data for Tehran, Iran, 2014-2016. Methods: We conducted a retrospective study, using 967 postmortem reports from fatal occupational injuries collected through postmortem investigations during 2014-2016. A sampling frame of 967 postmortem reports from fatal occupational injuries was used to draw a total sample of 714 fatal construction accidents for this cross-sectional study. Pearson χ2 test and Kruskal-Wallis tests were used for statistical analysis. Results: Based on the results of this study, male gender (n=714; 100%), age range of 30-39 years (n=183; 25.6%), secondary educational level (n=273; 38.2%), being married (317; 44.4%), causal employee (n=389; 54.5%), unskilled performance (389; 54.5%), no insurance coverage (472; 66.1%), and daytime duty work (287; 40.2%) were identified as risk factors for fatality in the event of construction fatal injury. A significant relationship was found between the type of injury and sociodemographic and work related variables. Conclusion: Workers' characteristics such as age, gender, experience, and educational background, and work related variables such as skill training, safety measurement, and close monitoring could be used to discriminate among different severity levels of

  6. Grassmannian frames with applications to coding and communication

    OpenAIRE

    Strohmer, Thomas; Heath Jr., Robert W

    2003-01-01

    For a given class ${\\cal F}$ of uniform frames of fixed redundancy we define a Grassmannian frame as one that minimizes the maximal correlation $||$ among all frames $\\{f_k\\}_{k \\in {\\cal I}} \\in {\\cal F}$. We first analyze finite-dimensional Grassmannian frames. Using links to packings in Grassmannian spaces and antipodal spherical codes we derive bounds on the minimal achievable correlation for Grassmannian frames. These...

  7. Seismic performance of masonry-infilled RC frames

    Directory of Open Access Journals (Sweden)

    Mircea Bârnaure

    2016-09-01

    Full Text Available The masonry infill of RC frames structures is generally considered as non-structural. The design of the concrete frames is often made by ignoring the influence of the masonry infill, which is only accounted for its mass. The experience on buildings submitted to earthquakes shows that masonry infill walls completely change the behaviour of bare frames due to increased initial stiffness and low deformability. The way in which masonry infills affect the RC frames members is difficult to predict, as different failure modes can occur either in the masonry or in the surrounding frame. In addition to local effects, the position of the masonry infills at different levels can lead to structural irregularity, with a strong influence on the global seismic response of the building. Less infilled stories, also called soft stories, have a particularly unfavourable behaviour under seismic loads, as frame members at these levels are more susceptible to failure. This paper analyses the differences in the behaviour of bare and infilled frames through numerical modelling. Nonlinear push-over analyses of infilled frames are carried out under in-plane vertical and lateral loading. The infill panels are modelled as equivalent single diagonal struts. Several force-displacements laws are considered for these diagonals.

  8. In search of the creation of news frames in Flemish newspapers: The case of the Belgian ‘Syria warriors’

    NARCIS (Netherlands)

    Boesman, J.L.J.; Berbers, A.; d'Haenens, L.; Van Gorp, B.

    2014-01-01

    This paper investigates the framing construction of Flemish newspaper journalists regarding the so-called ‘Syria-warriors’. When the Syrian conflict developed, the rebels against the Assad regim were joined by young muslims from Western European countries. Figures of the number of Belgian fighters

  9. Efficient Construction of Free Energy Profiles of Breathing Metal-Organic Frameworks Using Advanced Molecular Dynamics Simulations.

    Science.gov (United States)

    Demuynck, Ruben; Rogge, Sven M J; Vanduyfhuys, Louis; Wieme, Jelle; Waroquier, Michel; Van Speybroeck, Veronique

    2017-12-12

    In order to reliably predict and understand the breathing behavior of highly flexible metal-organic frameworks from thermodynamic considerations, an accurate estimation of the free energy difference between their different metastable states is a prerequisite. Herein, a variety of free energy estimation methods are thoroughly tested for their ability to construct the free energy profile as a function of the unit cell volume of MIL-53(Al). The methods comprise free energy perturbation, thermodynamic integration, umbrella sampling, metadynamics, and variationally enhanced sampling. A series of molecular dynamics simulations have been performed in the frame of each of the five methods to describe structural transformations in flexible materials with the volume as the collective variable, which offers a unique opportunity to assess their computational efficiency. Subsequently, the most efficient method, umbrella sampling, is used to construct an accurate free energy profile at different temperatures for MIL-53(Al) from first principles at the PBE+D3(BJ) level of theory. This study yields insight into the importance of the different aspects such as entropy contributions and anharmonic contributions on the resulting free energy profile. As such, this thorough study provides unparalleled insight in the thermodynamics of the large structural deformations of flexible materials.

  10. Efficient Construction of Free Energy Profiles of Breathing Metal–Organic Frameworks Using Advanced Molecular Dynamics Simulations

    Science.gov (United States)

    2017-01-01

    In order to reliably predict and understand the breathing behavior of highly flexible metal–organic frameworks from thermodynamic considerations, an accurate estimation of the free energy difference between their different metastable states is a prerequisite. Herein, a variety of free energy estimation methods are thoroughly tested for their ability to construct the free energy profile as a function of the unit cell volume of MIL-53(Al). The methods comprise free energy perturbation, thermodynamic integration, umbrella sampling, metadynamics, and variationally enhanced sampling. A series of molecular dynamics simulations have been performed in the frame of each of the five methods to describe structural transformations in flexible materials with the volume as the collective variable, which offers a unique opportunity to assess their computational efficiency. Subsequently, the most efficient method, umbrella sampling, is used to construct an accurate free energy profile at different temperatures for MIL-53(Al) from first principles at the PBE+D3(BJ) level of theory. This study yields insight into the importance of the different aspects such as entropy contributions and anharmonic contributions on the resulting free energy profile. As such, this thorough study provides unparalleled insight in the thermodynamics of the large structural deformations of flexible materials. PMID:29131647

  11. Framing Innovation

    DEFF Research Database (Denmark)

    Haase, Louise Møller; Laursen, Linda Nhu

    2017-01-01

    Designing a remarkable product innovation is a difficult challenge, which businesses today continuously are striving to tackle. This challenge is particularly present in the early phase of innovation, where the main product concept and frames of the innovation is determined. As a main challenge...... in the early phase is the reasoning process; innovation team are faced with open- ended ill-defines problems, where they need to make decisions about an unknown future having only incomplete, ambiguous and contradicting insights available. We study the reasoning of experts, how they frame to make sense of all...... the insights and create a basis for decision making in relation to a new project. Based on case studies of five innovative products from various industries, we suggest a Product Reasoning Model for understanding reasoning and envisioning of new product innovations in the early phases of innovation....

  12. Framing Innovation

    DEFF Research Database (Denmark)

    Haase, Louise Møller; Laursen, Linda Nhu

    2017-01-01

    Designing a remarkable product innovation is a difficult challenge, which businesses today continuously are striving to tackle. This challenge is particularly present in the early phase of innovation, where the main product concept and frames of the innovation is determined. As a main challenge...... in the early phase is the reasoning process; innovation team are faced with open-ended ill-defines problems, where they need to make decisions about an unknown future having only incomplete, ambiguous and contradicting insights available. We study the reasoning of experts, how they frame to make sense of all...... the insights and create a basis for decision making in relation to a new project. Based on case studies of five innovative products from various industries, we suggest a Product Reasoning Model for understanding reasoning and envisioning of new product innovations in the early phases...

  13. Quality in Construction- A Supply Chain Perspective

    DEFF Research Database (Denmark)

    Koch, Christian; Larsen, Casper Schultz

    2006-01-01

    be demonstrated by studying the emergence of failures occurring in the supply chain. The paper conceptualises the construction supply as a delivery network being partially stable, partially project specific and configured. It moreover develops a frame of understanding of the handling of quality issues...... in the delivery network, using operation management approaches. The paper presents case study work done in Danish construction. The method was observation of work at the construction site followed by interviews with actors backwards upstream the supply chain to the origin of the failure. The building project...... into the material stream. The paper proposes initiatives to strengthen partnerships in supply chains, especially at mixed stable and project configured types. The contradiction between permanent enterprise organisations potentially capable of handling purchasing and the role of the project manager is discussed...

  14. Evaluation of Fatih Project in the Frame of Digital Divide

    Science.gov (United States)

    Karabacak, Kerim

    2016-01-01

    The aim of this research realized at the general survey model is to evaluate "FATIH Project" in the frame of digital divide by determining the effects of the distributed tablets to the students being educated at K-12 schools on digital divide. Sample is taking from the 9th grade students in Sakarya city in the 2013-2014 academic session.…

  15. A preliminary study to assess the construct validity of a cultural intelligence measure on a South African sample

    Directory of Open Access Journals (Sweden)

    Bright Mahembe

    2014-09-01

    Research purpose: The purpose of the current study was to assess the construct validity of the CQS on a South African sample. The results of the psychometric assessment offer some important insights into the factor structure of the cultural intelligence construct. Motivation for the study: The current study sought to provide some practical validity confirmation of the CQS for the effective management of cultural diversity in the South African context. Research approach, design and method: The CQS was administered on a non-probability sample of 229 young adults in South Africa. Item analysis was performed to ascertain reliability. Exploratory factor analysis was used to test the unidimensionality of CQS subscales. The first-order and second-order factor structures underlying contemporary models of cultural intelligence were tested using confirmatory factor analysis. Main findings: Results indicated that the CQS is a reliable and valid measure of cultural intelligence as evidenced by the high internal consistency coefficients in all the subscales. Good construct validity for both the first-order and second-order models was obtained via confirmatory factor analysis. Practical/managerial implications: The study finds good measurement properties of the CQS in a South African context. The CQS can be confidently used for applications such as selecting, training and developing a more culturally competent workforce. Contribution: The study extends the body of knowledge on the reliability and construct validity of the CQS in the South African milieu. It further indicates that cultural intelligence can be represented by a general cultural intelligence factor that drives more specific dimensions of cultural intelligence.

  16. A neuroimaging investigation of attribute framing and individual differences

    Science.gov (United States)

    Murch, Kevin B.

    2014-01-01

    Functional magnetic resonance imaging was used to evaluate the neural basis of framing effects. We tested the reflexive and reflective systems model of social cognition as it relates to framing. We also examined the relationships among frame susceptibility, intelligence and personality measures. Participants evaluated whether personal attributes applied to themselves from multiple perspectives and in positive and negative frames. Participants rated whether each statement was descriptive or not and endorsed positive frames more than negative frames. Individual differences on frame decisions enabled us to form high and low frame susceptibility groups. Endorsement of frame-consistent attributes was associated with personality factors, cognitive reflection and intelligence. Reflexive brain regions were associated with positive frames while reflective areas were associated with negative frames. Region of Interest analyses showed that frame-inconsistent responses were associated with increased activation within reflective cognitive control regions including the left dorsolateral prefrontal cortex (PFC), dorsomedial PFC and left ventrolateral PFC. Frame-consistent responses were associated with increased activation in the right orbitofrontal cortex. These results demonstrate that individual differences in frame susceptibility influence personal attribute evaluations. Overall, this study clarifies the neural correlates of the reflective and reflexive systems of social cognition as applied to decisions about social attributions. PMID:23988759

  17. Research on Optimization of Formula SAE Truss-Frame

    Directory of Open Access Journals (Sweden)

    Wang Yu

    2017-01-01

    Full Text Available The frame, as one of the basic components of a car, plays an important role of connecting components and withstanding various loads. The truss-frame is the commonest form of Formula SAE car in that it has many advantages, such as low cost, simple manufacture, high rigidity and high strength. The development of frame is reviewed. First, the key performance indicators and the mechanical state of the frame under different conditions are discussed. Second, a variety of optimization methods used in the design of frame are described. Finally, the test method of frame are introduced, with the experimental data and the finite element analysis of results being compared. Through analyzing and summarizing the development of the design, optimization and testing technology of the Formula SAE truss-frame, forecasting the future trends, the great theoretical reference is provided for the design and research of the follow-up frame.

  18. Sparse Representations-Based Super-Resolution of Key-Frames Extracted from Frames-Sequences Generated by a Visual Sensor Network

    Directory of Open Access Journals (Sweden)

    Muhammad Sajjad

    2014-02-01

    Full Text Available Visual sensor networks (VSNs usually generate a low-resolution (LR frame-sequence due to energy and processing constraints. These LR-frames are not very appropriate for use in certain surveillance applications. It is very important to enhance the resolution of the captured LR-frames using resolution enhancement schemes. In this paper, an effective framework for a super-resolution (SR scheme is proposed that enhances the resolution of LR key-frames extracted from frame-sequences captured by visual-sensors. In a VSN, a visual processing hub (VPH collects a huge amount of visual data from camera sensors. In the proposed framework, at the VPH, key-frames are extracted using our recent key-frame extraction technique and are streamed to the base station (BS after compression. A novel effective SR scheme is applied at BS to produce a high-resolution (HR output from the received key-frames. The proposed SR scheme uses optimized orthogonal matching pursuit (OOMP for sparse-representation recovery in SR. OOMP does better in terms of detecting true sparsity than orthogonal matching pursuit (OMP. This property of the OOMP helps produce a HR image which is closer to the original image. The K-SVD dictionary learning procedure is incorporated for dictionary learning. Batch-OMP improves the dictionary learning process by removing the limitation in handling a large set of observed signals. Experimental results validate the effectiveness of the proposed scheme and show its superiority over other state-of-the-art schemes.

  19. Sparse representations-based super-resolution of key-frames extracted from frames-sequences generated by a visual sensor network.

    Science.gov (United States)

    Sajjad, Muhammad; Mehmood, Irfan; Baik, Sung Wook

    2014-02-21

    Visual sensor networks (VSNs) usually generate a low-resolution (LR) frame-sequence due to energy and processing constraints. These LR-frames are not very appropriate for use in certain surveillance applications. It is very important to enhance the resolution of the captured LR-frames using resolution enhancement schemes. In this paper, an effective framework for a super-resolution (SR) scheme is proposed that enhances the resolution of LR key-frames extracted from frame-sequences captured by visual-sensors. In a VSN, a visual processing hub (VPH) collects a huge amount of visual data from camera sensors. In the proposed framework, at the VPH, key-frames are extracted using our recent key-frame extraction technique and are streamed to the base station (BS) after compression. A novel effective SR scheme is applied at BS to produce a high-resolution (HR) output from the received key-frames. The proposed SR scheme uses optimized orthogonal matching pursuit (OOMP) for sparse-representation recovery in SR. OOMP does better in terms of detecting true sparsity than orthogonal matching pursuit (OMP). This property of the OOMP helps produce a HR image which is closer to the original image. The K-SVD dictionary learning procedure is incorporated for dictionary learning. Batch-OMP improves the dictionary learning process by removing the limitation in handling a large set of observed signals. Experimental results validate the effectiveness of the proposed scheme and show its superiority over other state-of-the-art schemes.

  20. Pengaruh Adverse Selection dan Negative Framing pada Kecenderungan Eskalasi Komitmen

    Directory of Open Access Journals (Sweden)

    Gede Wira Kusuma

    2017-02-01

    Full Text Available Escalation of commitment is a decision to increase or expand the commitment to a project or a particular investment even though the investment project or indicate failure. This research has the objective to obtain empirical evidence of the effect of adverse selection and negative framing effect on the escalation of commitment tendency. Experimental design used of this research is 2 x 2 factorial design with the instrument in the form of cases. Participants in this research were Magister ofAccounting and Magister of Management students, as a proxy manager chosen by purposive sampling technique as much as 196 participants. This research uses of two ways ANOVA analysis techniques. This research proves that adverse selection and negative framing have an influence on the propensity of escalation of commitment.