Importance of questionnaire context for a physical activity question.

Science.gov (United States)

Jørgensen, M E; Sørensen, M R; Ekholm, O; Rasmussen, N K

2013-10-01

Adequate information about physical activity habits is essential for surveillance, implementing, and evaluating public health initiatives in this area. Previous studies have shown that question order and differences in wording result in systematic differences in people's responses to questionnaires; however, this has never been shown for physical activity questions. The aim was to study the influence of different formulations and question order on self-report physical activity in a population-based health interview survey. Four samples of each 1000 adults were drawn at random from the National Person Register. A new question about physical activity was included with minor differences in formulations in samples 1-3. Furthermore, the question in sample 2 was included in sample 4 but was placed in the end of the questionnaire. The mean time spent on moderate physical activity varied between the four samples from 57 to 100 min/day. Question order was associated with the reported number of minutes spent on moderate-intensity physical activity and with prevalence of meeting the recommendation, whereas physical inactivity was associated with the differences in formulation of the question. Questionnaire context influences the way people respond to questions about physical activity significantly and should be tested systematically in validation studies of physical activity questionnaires. © 2012 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Test sample handling apparatus

International Nuclear Information System (INIS)

1981-01-01

A test sample handling apparatus using automatic scintillation counting for gamma detection, for use in such fields as radioimmunoassay, is described. The apparatus automatically and continuously counts large numbers of samples rapidly and efficiently by the simultaneous counting of two samples. By means of sequential ordering of non-sequential counting data, it is possible to obtain precisely ordered data while utilizing sample carrier holders having a minimum length. (U.K.)

Testing increases suggestibility for narrative-based misinformation but reduces suggestibility for question-based misinformation.

Science.gov (United States)

LaPaglia, Jessica A; Chan, Jason C K

2013-01-01

A number of recent studies have found that recalling details of an event following its occurrence can increase people's suggestibility to later presented misinformation. However, several other studies have reported the opposite result, whereby earlier retrieval can reduce subsequent eyewitness suggestibility. In the present study, we investigated whether differences in the way misinformation is presented can modulate the effects of testing on suggestibility. Participants watched a video of a robbery and some were questioned about the event immediately afterwards. Later, participants were exposed to misinformation in a narrative (Experiment 1) or in questions (Experiment 2). Consistent with previous studies, we found that testing increased suggestibility when misinformation was presented via a narrative. Remarkably, when misinformation was presented in questions, testing decreased suggestibility. Copyright © 2013 John Wiley & Sons, Ltd.

Analysis of small sample size studies using nonparametric bootstrap test with pooled resampling method.

Science.gov (United States)

Dwivedi, Alok Kumar; Mallawaarachchi, Indika; Alvarado, Luis A

2017-06-30

Experimental studies in biomedical research frequently pose analytical problems related to small sample size. In such studies, there are conflicting findings regarding the choice of parametric and nonparametric analysis, especially with non-normal data. In such instances, some methodologists questioned the validity of parametric tests and suggested nonparametric tests. In contrast, other methodologists found nonparametric tests to be too conservative and less powerful and thus preferred using parametric tests. Some researchers have recommended using a bootstrap test; however, this method also has small sample size limitation. We used a pooled method in nonparametric bootstrap test that may overcome the problem related with small samples in hypothesis testing. The present study compared nonparametric bootstrap test with pooled resampling method corresponding to parametric, nonparametric, and permutation tests through extensive simulations under various conditions and using real data examples. The nonparametric pooled bootstrap t-test provided equal or greater power for comparing two means as compared with unpaired t-test, Welch t-test, Wilcoxon rank sum test, and permutation test while maintaining type I error probability for any conditions except for Cauchy and extreme variable lognormal distributions. In such cases, we suggest using an exact Wilcoxon rank sum test. Nonparametric bootstrap paired t-test also provided better performance than other alternatives. Nonparametric bootstrap test provided benefit over exact Kruskal-Wallis test. We suggest using nonparametric bootstrap test with pooled resampling method for comparing paired or unpaired means and for validating the one way analysis of variance test results for non-normal data in small sample size studies. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

Gleeble Testing of Tungsten Samples

Science.gov (United States)

2013-02-01

temperature on an Instron load frame with a 222.41 kN (50 kip) load cell . The samples were compressed at the same strain rate as on the Gleeble...ID % RE Initial Density (cm 3 ) Density after Compression (cm 3 ) % Change in Density Test Temperature NT1 0 18.08 18.27 1.06 1000 NT3 0...4.1 Nano-Tungsten The results for the compression of the nano-tungsten samples are shown in tables 2 and 3 and figure 5. During testing, sample NT1

An Online National Archive of Multiple-Choice Questions for Astro 101 and the Development of the Question Complexity Rubric

Science.gov (United States)

Cormier, S.; Prather, E.; Brissenden, G.

2011-09-01

We are developing a national archive of multiple-choice questions for use in the Astronomy 101 classroom. These questions are intended to supplement an instructor's implementation of Think-Pair-Share or for their assessment purposes (i.e., exams and homework). We are also developing the Question Complexity Rubric (QCR) to guide members of the Astro 101 teaching and learning community in assisting us with hierarchically ranking questions in this archive based on their conceptual complexity. Using the QCR, a score is assigned to differentiate each question based on the cognitive steps necessary to comprehensively explain the reasoning pathway to the correct answer. The lowest QCR score is given to questions with a reasoning pathway requiring only declarative knowledge. The highest QCR score is given to questions with a reasoning pathway that requires multiple connected cognitive steps. When completed, the online question archive will provide users with the utility to 1) use the QCR to score questions 2) search for and download questions based on topic and/or QCR score, and 3) add their own questions to the archive. Stop by our poster to test your skills at determining question complexity by trying out the QCR with our sample questions.

Acceptance test procedure for core sample trucks

International Nuclear Information System (INIS)

Smalley, J.L.

1995-01-01

The purpose of this Acceptance Test Procedure is to provide instruction and documentation for acceptance testing of the rotary mode core sample trucks, HO-68K-4600 and HO-68K-4647. The rotary mode core sample trucks were based upon the design of the second core sample truck (HO-68K-4345) which was constructed to implement rotary mode sampling of the waste tanks at Hanford. Acceptance testing of the rotary mode core sample trucks will verify that the design requirements have been met. All testing will be non-radioactive and stand-in materials shall be used to simulate waste tank conditions. Compressed air will be substituted for nitrogen during the majority of testing, with nitrogen being used only for flow characterization

Randomization tests

CERN Document Server

Edgington, Eugene

2007-01-01

Statistical Tests That Do Not Require Random Sampling Randomization Tests Numerical Examples Randomization Tests and Nonrandom Samples The Prevalence of Nonrandom Samples in Experiments The Irrelevance of Random Samples for the Typical Experiment Generalizing from Nonrandom Samples Intelligibility Respect for the Validity of Randomization Tests Versatility Practicality Precursors of Randomization Tests Other Applications of Permutation Tests Questions and Exercises Notes References Randomized Experiments Unique Benefits of Experiments Experimentation without Mani

Open-ended questions in sensory testing practice

NARCIS (Netherlands)

Piqueras Fiszman, B.

2015-01-01

Why use open-ended questions? This chapter provides an up-to-date overview on the use of open-ended questions in novel rapid sensory methodologies and the potential applications in which they could provide unique benefits. Next, the step-by-step process is described (from task performance to

Tests on standard concrete samples

CERN Multimedia

CERN PhotoLab

1973-01-01

Compression and tensile tests on standard concrete samples. The use of centrifugal force in tensile testing has been developed by the SB Division and the instruments were built in the Central workshops.

Experimental and Sampling Design for the INL-2 Sample Collection Operational Test

Energy Technology Data Exchange (ETDEWEB)

Piepel, Gregory F.; Amidan, Brett G.; Matzke, Brett D.

2009-02-16

This report describes the experimental and sampling design developed to assess sampling approaches and methods for detecting contamination in a building and clearing the building for use after decontamination. An Idaho National Laboratory (INL) building will be contaminated with BG (Bacillus globigii, renamed Bacillus atrophaeus), a simulant for Bacillus anthracis (BA). The contamination, sampling, decontamination, and re-sampling will occur per the experimental and sampling design. This INL-2 Sample Collection Operational Test is being planned by the Validated Sampling Plan Working Group (VSPWG). The primary objectives are: 1) Evaluate judgmental and probabilistic sampling for characterization as well as probabilistic and combined (judgment and probabilistic) sampling approaches for clearance, 2) Conduct these evaluations for gradient contamination (from low or moderate down to absent or undetectable) for different initial concentrations of the contaminant, 3) Explore judgment composite sampling approaches to reduce sample numbers, 4) Collect baseline data to serve as an indication of the actual levels of contamination in the tests. A combined judgmental and random (CJR) approach uses Bayesian methodology to combine judgmental and probabilistic samples to make clearance statements of the form "X% confidence that at least Y% of an area does not contain detectable contamination” (X%/Y% clearance statements). The INL-2 experimental design has five test events, which 1) vary the floor of the INL building on which the contaminant will be released, 2) provide for varying the amount of contaminant released to obtain desired concentration gradients, and 3) investigate overt as well as covert release of contaminants. Desirable contaminant gradients would have moderate to low concentrations of contaminant in rooms near the release point, with concentrations down to zero in other rooms. Such gradients would provide a range of contamination levels to challenge the sampling

The Zend PHP certification practice test book practice questions for the Zend certified engineer exam

CERN Document Server

Coggeshall, John

2005-01-01

As the usage of PHP grows, the need for a globally-recognized credentials program for professional developers is becoming more and more important. The Zend Engineer Certification Program, launched by worldwide PHP leader Zend Technologies, finally creates a professional designation that represents consistently high-quality skills and knowledge in the PHP world. Written and edited by four members of the Zend Education Board who also helped create the actual Zend Certification Exam, this book contains 200 questions on every topic that is part of the exam. The Zend Certification Practice Test Book is an invaluable resource in testing your preparedness in every area of the exam, from the basics to the most advanced topics. Each question comes with a clear answer that provides an explanation of the question's topic, its goals and end result. Answering the questions in this book will allow you to clearly and quickly identify the areas of PHP in which you are strong and those in which you need further study before b...

Sample Size Determination for One- and Two-Sample Trimmed Mean Tests

Science.gov (United States)

Luh, Wei-Ming; Olejnik, Stephen; Guo, Jiin-Huarng

2008-01-01

Formulas to determine the necessary sample sizes for parametric tests of group comparisons are available from several sources and appropriate when population distributions are normal. However, in the context of nonnormal population distributions, researchers recommend Yuen's trimmed mean test, but formulas to determine sample sizes have not been…

Estimating Sample Size for Usability Testing

Directory of Open Access Journals (Sweden)

Alex Cazañas

2017-02-01

Full Text Available One strategy used to assure that an interface meets user requirements is to conduct usability testing. When conducting such testing one of the unknowns is sample size. Since extensive testing is costly, minimizing the number of participants can contribute greatly to successful resource management of a project. Even though a significant number of models have been proposed to estimate sample size in usability testing, there is still not consensus on the optimal size. Several studies claim that 3 to 5 users suffice to uncover 80% of problems in a software interface. However, many other studies challenge this assertion. This study analyzed data collected from the user testing of a web application to verify the rule of thumb, commonly known as the “magic number 5”. The outcomes of the analysis showed that the 5-user rule significantly underestimates the required sample size to achieve reasonable levels of problem detection.

Situational judgement tests and personality measurement : some answers and more questions

OpenAIRE

Judge, Timothy A.; Hofmans, Joeri; Wille, Bart

2017-01-01

Abstract: Work psychologists have devoted considerable attention to studying how personality traits can best be conceptualized and assessed in 'high-stakes' contexts such as selection or hiring decisions. Lievens argued that two selection methods, Situational Judgement Tests and Assessment Centre exercises, by standardizing and contextualizing personality measurement, offer many advantages to personality psychology. In hopes of clarifying this argument, we ask two fundamental questions: (1) W...

Self-Questioning and Prose Comprehension: A Sample Case of ESL Reading.

Science.gov (United States)

Miciano, Remedios Z.

2002-01-01

Report on an experiment to discover if self-questioning as a reading strategy would help Filipino ESL students improve comprehension of English prose texts. Concludes that self-questioning as a strategy does not significantly affect comprehension despite the number and types of questions asked. (Contains 4 tables and 25 references.) (WFA)

Double sampling with multiple imputation to answer large sample meta-research questions: Introduction and illustration by evaluating adherence to two simple CONSORT guidelines

Directory of Open Access Journals (Sweden)

Patrice L. Capers

2015-03-01

Full Text Available BACKGROUND: Meta-research can involve manual retrieval and evaluation of research, which is resource intensive. Creation of high throughput methods (e.g., search heuristics, crowdsourcing has improved feasibility of large meta-research questions, but possibly at the cost of accuracy. OBJECTIVE: To evaluate the use of double sampling combined with multiple imputation (DS+MI to address meta-research questions, using as an example adherence of PubMed entries to two simple Consolidated Standards of Reporting Trials (CONSORT guidelines for titles and abstracts. METHODS: For the DS large sample, we retrieved all PubMed entries satisfying the filters: RCT; human; abstract available; and English language (n=322,107. For the DS subsample, we randomly sampled 500 entries from the large sample. The large sample was evaluated with a lower rigor, higher throughput (RLOTHI method using search heuristics, while the subsample was evaluated using a higher rigor, lower throughput (RHITLO human rating method. Multiple imputation of the missing-completely-at-random RHITLO data for the large sample was informed by: RHITLO data from the subsample; RLOTHI data from the large sample; whether a study was an RCT; and country and year of publication. RESULTS: The RHITLO and RLOTHI methods in the subsample largely agreed (phi coefficients: title=1.00, abstract=0.92. Compliance with abstract and title criteria has increased over time, with non-US countries improving more rapidly. DS+MI logistic regression estimates were more precise than subsample estimates (e.g., 95% CI for change in title and abstract compliance by Year: subsample RHITLO 1.050-1.174 vs. DS+MI 1.082-1.151. As evidence of improved accuracy, DS+MI coefficient estimates were closer to RHITLO than the large sample RLOTHI. CONCLUSIONS: Our results support our hypothesis that DS+MI would result in improved precision and accuracy. This method is flexible and may provide a practical way to examine large corpora of

Testing a groundwater sampling tool: Are the samples representative?

International Nuclear Information System (INIS)

Kaback, D.S.; Bergren, C.L.; Carlson, C.A.; Carlson, C.L.

1989-01-01

A ground water sampling tool, the HydroPunch trademark, was tested at the Department of Energy's Savannah River Site in South Carolina to determine if representative ground water samples could be obtained without installing monitoring wells. Chemical analyses of ground water samples collected with the HydroPunch trademark from various depths within a borehole were compared with chemical analyses of ground water from nearby monitoring wells. The site selected for the test was in the vicinity of a large coal storage pile and a coal pile runoff basin that was constructed to collect the runoff from the coal storage pile. Existing monitoring wells in the area indicate the presence of a ground water contaminant plume that: (1) contains elevated concentrations of trace metals; (2) has an extremely low pH; and (3) contains elevated concentrations of major cations and anions. Ground water samples collected with the HydroPunch trademark provide in excellent estimate of ground water quality at discrete depths. Groundwater chemical data collected from various depths using the HydroPunch trademark can be averaged to simulate what a screen zone in a monitoring well would sample. The averaged depth-discrete data compared favorably with the data obtained from the nearby monitoring wells

When is a research question not a research question?

Science.gov (United States)

Mayo, Nancy E; Asano, Miho; Barbic, Skye Pamela

2013-06-01

Research is undertaken to answer important questions yet often the question is poorly expressed and lacks information on the population, the exposure or intervention, the comparison, and the outcome. An optimal research question sets out what the investigator wants to know, not what the investigator might do, nor what the results of the study might ultimately contribute. The purpose of this paper is to estimate the extent to which rehabilitation scientists optimally define their research questions. A cross-sectional survey of the rehabilitation research articles published during 2008. Two raters independently rated each question according to pre-specified criteria; a third rater adjudicated all discrepant ratings. The proportion of the 258 articles with a question formulated as methods or expected contribution and not as what knowledge was being sought was 65%; 30% of questions required reworking. The designs which most often had poorly formulated research questions were randomized trials, cross-sectional and measurement studies. Formulating the research question is not purely a semantic concern. When the question is poorly formulated, the design, analysis, sample size calculations, and presentation of results may not be optimal. The gap between research and clinical practice could be bridged by a clear, complete, and informative research question.

Short-Run Contexts and Imperfect Testing for Continuous Sampling Plans

Directory of Open Access Journals (Sweden)

Mirella Rodriguez

2018-04-01

Full Text Available Continuous sampling plans are used to ensure a high level of quality for items produced in long-run contexts. The basic idea of these plans is to alternate between 100% inspection and a reduced rate of inspection frequency. Any inspected item that is found to be defective is replaced with a non-defective item. Because not all items are inspected, some defective items will escape to the customer. Analytical formulas have been developed that measure both the customer perceived quality and also the level of inspection effort. The analysis of continuous sampling plans does not apply to short-run contexts, where only a finite-size batch of items is to be produced. In this paper, a simulation algorithm is designed and implemented to analyze the customer perceived quality and the level of inspection effort for short-run contexts. A parameter representing the effectiveness of the test used during inspection is introduced to the analysis, and an analytical approximation is discussed. An application of the simulation algorithm that helped answer questions for the U.S. Navy is discussed.

Answering unresolved questions about the relationship between cognitive ability and prejudice

NARCIS (Netherlands)

Brandt, M.J.; Crawford, Jarret T

2016-01-01

Previous research finds that lower cognitive ability predicts greater prejudice. We test two unresolved questions about this association using a heterogeneous set of target groups and data from a representative sample of the United States (N = 5,914). First, we test “who are the targets of

Backward Dependencies and in-Situ wh-Questions as Test Cases on How to Approach Experimental Linguistics Research That Pursues Theoretical Linguistics Questions

Science.gov (United States)

Pablos, Leticia; Doetjes, Jenny; Cheng, Lisa L.-S.

2018-01-01

The empirical study of language is a young field in contemporary linguistics. This being the case, and following a natural development process, the field is currently at a stage where different research methods and experimental approaches are being put into question in terms of their validity. Without pretending to provide an answer with respect to the best way to conduct linguistics related experimental research, in this article we aim at examining the process that researchers follow in the design and implementation of experimental linguistics research with a goal to validate specific theoretical linguistic analyses. First, we discuss the general challenges that experimental work faces in finding a compromise between addressing theoretically relevant questions and being able to implement these questions in a specific controlled experimental paradigm. We discuss the Granularity Mismatch Problem (Poeppel and Embick, 2005) which addresses the challenges that research that is trying to bridge the representations and computations of language and their psycholinguistic/neurolinguistic evidence faces, and the basic assumptions that interdisciplinary research needs to consider due to the different conceptual granularity of the objects under study. To illustrate the practical implications of the points addressed, we compare two approaches to perform linguistic experimental research by reviewing a number of our own studies strongly grounded on theoretically informed questions. First, we show how linguistic phenomena similar at a conceptual level can be tested within the same language using measurement of event-related potentials (ERP) by discussing results from two ERP experiments on the processing of long-distance backward dependencies that involve coreference and negative polarity items respectively in Dutch. Second, we examine how the same linguistic phenomenon can be tested in different languages using reading time measures by discussing the outcome of four self

Backward Dependencies and in-Situ wh-Questions as Test Cases on How to Approach Experimental Linguistics Research That Pursues Theoretical Linguistics Questions.

Science.gov (United States)

Pablos, Leticia; Doetjes, Jenny; Cheng, Lisa L-S

2017-01-01

The empirical study of language is a young field in contemporary linguistics. This being the case, and following a natural development process, the field is currently at a stage where different research methods and experimental approaches are being put into question in terms of their validity. Without pretending to provide an answer with respect to the best way to conduct linguistics related experimental research, in this article we aim at examining the process that researchers follow in the design and implementation of experimental linguistics research with a goal to validate specific theoretical linguistic analyses. First, we discuss the general challenges that experimental work faces in finding a compromise between addressing theoretically relevant questions and being able to implement these questions in a specific controlled experimental paradigm. We discuss the Granularity Mismatch Problem (Poeppel and Embick, 2005) which addresses the challenges that research that is trying to bridge the representations and computations of language and their psycholinguistic/neurolinguistic evidence faces, and the basic assumptions that interdisciplinary research needs to consider due to the different conceptual granularity of the objects under study. To illustrate the practical implications of the points addressed, we compare two approaches to perform linguistic experimental research by reviewing a number of our own studies strongly grounded on theoretically informed questions. First, we show how linguistic phenomena similar at a conceptual level can be tested within the same language using measurement of event-related potentials (ERP) by discussing results from two ERP experiments on the processing of long-distance backward dependencies that involve coreference and negative polarity items respectively in Dutch. Second, we examine how the same linguistic phenomenon can be tested in different languages using reading time measures by discussing the outcome of four self

Backward Dependencies and in-Situ wh-Questions as Test Cases on How to Approach Experimental Linguistics Research That Pursues Theoretical Linguistics Questions

Directory of Open Access Journals (Sweden)

Leticia Pablos

2018-01-01

Full Text Available The empirical study of language is a young field in contemporary linguistics. This being the case, and following a natural development process, the field is currently at a stage where different research methods and experimental approaches are being put into question in terms of their validity. Without pretending to provide an answer with respect to the best way to conduct linguistics related experimental research, in this article we aim at examining the process that researchers follow in the design and implementation of experimental linguistics research with a goal to validate specific theoretical linguistic analyses. First, we discuss the general challenges that experimental work faces in finding a compromise between addressing theoretically relevant questions and being able to implement these questions in a specific controlled experimental paradigm. We discuss the Granularity Mismatch Problem (Poeppel and Embick, 2005 which addresses the challenges that research that is trying to bridge the representations and computations of language and their psycholinguistic/neurolinguistic evidence faces, and the basic assumptions that interdisciplinary research needs to consider due to the different conceptual granularity of the objects under study. To illustrate the practical implications of the points addressed, we compare two approaches to perform linguistic experimental research by reviewing a number of our own studies strongly grounded on theoretically informed questions. First, we show how linguistic phenomena similar at a conceptual level can be tested within the same language using measurement of event-related potentials (ERP by discussing results from two ERP experiments on the processing of long-distance backward dependencies that involve coreference and negative polarity items respectively in Dutch. Second, we examine how the same linguistic phenomenon can be tested in different languages using reading time measures by discussing the outcome of

Questionnaire design: carry-over effects of overall acceptance question placement and pre-evaluation instructions on overall acceptance scores in central location tests.

Science.gov (United States)

Bastian, Mauresa; Eggett, Dennis L; Jefferies, Laura K

2015-02-01

Question placement and usage of pre-evaluation instructions (PEI) in questionnaires for food sensory analysis may bias consumers' scores via carry-over effects. Data from consumer sensory panels previously conducted at a central location, spanning 11 years and covering a broad range of food product categories, were compiled. Overall acceptance (OA) question placement was studied with categories designated as first (the first evaluation question following demographic questions), after nongustation questions (immediately following questions that do not require panelists to taste the product), and later (following all other hedonic and just-about-right [JAR] questions, but occasionally before ranking, open-ended comments, and/or intent to purchase questions). Each panel was categorized as having or not having PEI in the questionnaire; PEI are instructions that appear immediately before the first evaluation question and show panelists all attributes they will evaluate before receiving test samples. Postpanel surveys were administered regarding the self-reported effect of PEI on panelists' evaluation experience. OA scores were analyzed and compared (1) between OA question placement categories and (2) between panels with and without PEI. For most product categories, OA scores tended to be lower when asked later in the questionnaire, suggesting evidence of a carry-over effect. Usage of PEI increased OA scores by 0.10 of a 9-point hedonic scale point, which is not practically significant. Postpanel survey data showed that presence of PEI typically improved the panelists' experience. Using PEI does not appear to introduce a meaningful carry-over effect. © 2015 Institute of Food Technologists®

Development and testing of new candidate psoriatic arthritis screening questionnaires combining optimal questions from existing tools.

Science.gov (United States)

Coates, Laura C; Walsh, Jessica; Haroon, Muhammad; FitzGerald, Oliver; Aslam, Tariq; Al Balushi, Farida; Burden, A D; Burden-Teh, Esther; Caperon, Anna R; Cerio, Rino; Chattopadhyay, Chandrabhusan; Chinoy, Hector; Goodfield, Mark J D; Kay, Lesley; Kelly, Stephen; Kirkham, Bruce W; Lovell, Christopher R; Marzo-Ortega, Helena; McHugh, Neil; Murphy, Ruth; Reynolds, Nick J; Smith, Catherine H; Stewart, Elizabeth J C; Warren, Richard B; Waxman, Robin; Wilson, Hilary E; Helliwell, Philip S

2014-09-01

Several questionnaires have been developed to screen for psoriatic arthritis (PsA), but head-to-head studies have found limitations. This study aimed to develop new questionnaires encompassing the most discriminative questions from existing instruments. Data from the CONTEST study, a head-to-head comparison of 3 existing questionnaires, were used to identify items with a Youden index score of ≥0.1. These were combined using 4 approaches: CONTEST (simple additions of questions), CONTESTw (weighting using logistic regression), CONTESTjt (addition of a joint manikin), and CONTESTtree (additional questions identified by classification and regression tree [CART] analysis). These candidate questionnaires were tested in independent data sets. Twelve individual questions with a Youden index score of ≥0.1 were identified, but 4 of these were excluded due to duplication and redundancy. Weighting for 2 of these questions was included in CONTESTw. Receiver operating characteristic (ROC) curve analysis showed that involvement in 6 joint areas on the manikin was predictive of PsA for inclusion in CONTESTjt. CART analysis identified a further 5 questions for inclusion in CONTESTtree. CONTESTtree was not significant on ROC curve analysis and discarded. The other 3 questionnaires were significant in all data sets, although CONTESTw was slightly inferior to the others in the validation data sets. Potential cut points for referral were also discussed. Of 4 candidate questionnaires combining existing discriminatory items to identify PsA in people with psoriasis, 3 were found to be significant on ROC curve analysis. Testing in independent data sets identified 2 questionnaires (CONTEST and CONTESTjt) that should be pursued for further prospective testing. Copyright © 2014 by the American College of Rheumatology.

7 CFR 28.952 - Testing of samples.

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Testing of samples. 28.952 Section 28.952 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... processing tests of the properties of cotton samples and report the results thereof to the persons from whom...

The role of student’s critical asking question in developing student’s critical thinking skills

Science.gov (United States)

Santoso, T.; Yuanita, L.; Erman, E.

2018-01-01

Questioning means thinking, and thinking is manifested in the form of questions. Research that studies the relationship between questioning and students’ critical thinking skills is little, if any. The aim of this study is to examine how student’s questions skill correlates to student’s critical thinking skills in learning of chemistry. The research design used was one group pretest-posttest design. The participants involved were 94 students, all of whom attended their last semesters, Chemistry Education of Tadulako University. A pre-test was administered to check participants’ ability to ask critical questions and critical thinking skills in learning chemistry. Then, the students were taught by using questioning technique. After accomplishing the lesson, a post-test was given to evaluate their progress. Obtained data were analyzed by using Pair-Samples T.Test and correlation methods. The result shows that the level of the questions plays an important role in critical thinking skills is the question levels of predictive, analysis, evaluation and inference.

Airflow Test of Acoustic Board Samples

DEFF Research Database (Denmark)

Jensen, Rasmus Lund; Jensen, Lise Mellergaard

In the laboratory of Indoor Environmental Engineering, Department of Civil Engineering, Aalborg University an airflow test on 2x10 samples of acoustic board were carried out the 2nd of June 2012. The tests were carried out for Rambøll and STO AG. The test includes connected values of volume flow...

46 CFR 160.050-5 - Sampling, tests, and inspection.

Science.gov (United States)

2010-10-01

... one from which any sample ring life buoy failed the buoyancy or strength test, the sample shall... ring life buoys with this subpart. The manufacturer shall provide means to secure any test that is not... procedures. Table 160.050-5(e)—Sampling for Buoyancy Tests Lot size Number of life buoys in sample 100 and...

CopperCore Service Integration, Integrating IMS Learning Design and IMS Question and Test Interoperability

NARCIS (Netherlands)

Vogten, Hubert; Martens, Harrie; Nadolski, Rob; Tattersall, Colin; Van Rosmalen, Peter; Koper, Rob

2006-01-01

Vogten, H., Martens, H., Nadolski, R., Tattersall, C., Rosmalen, van, P., Koper, R., (2006). CopperCore Service Integration, Integrating IMS Learning Design and IMS Question and Test Interoperability. Proceedings of the 6th IEEE International Conference on Advanced Learning Technologies (pp.

The effect of sample storage on the performance and reproducibility of the galactomannan EIA test.

Science.gov (United States)

Kimpton, George; White, P Lewis; Barnes, Rosemary A

2014-08-01

Galactomannan enzyme immune assay (GM EIA) is a nonculture test for detecting invasive aspergillosis (IA) forming a key part of diagnosis and management. Recent reports have questioned the reproducibility of indices after sample storage. To investigate this, 198 serum samples (72 from cases and 126 from controls) and 61 plasma samples (24 from cases and 37 from controls), initially tested between 2010 and 2013, were retested to determine any change in index. Data were also collected on circulatory protein levels for false-positive serum samples. Serum indices significantly declined on retesting (median: initial, 0.50, retest, 0.23; P < 0.0001). This was shown to be diagnosis dependent as the decline was apparent on retesting of control samples (median: initial 0.50, retest 0.12; P < 0.0001), but was not evident with case samples (median: initial, 0.80, retest, 0.80; P = 0.724). Plasma samples showed little change on reanalysis after long-term storage at 4°C. Retesting after freezing showed a decrease in index values for controls (median: initial 0.40, retest 0.26; P = 0.0505), but no significant change in cases. Circulatory proteins showed a correlation between serum albumin concentration and difference in index value on retesting. Overall, this study suggests that a lack of reproducibility in GM EIA positivity is only significant when disease is absent. Retesting after freezing helps to differentiate false-positive GM EIA results and, with consecutive positivity, could help to improve accuracy in predicting disease status. The freezing of samples prior to testing could potentially reduce false-positivity rates and the need to retest. © The Author 2014. Published by Oxford University Press on behalf of The International Society for Human and Animal Mycology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Operability test procedure for PFP wastewater sampling facility

International Nuclear Information System (INIS)

Hirzel, D.R.

1995-01-01

Document provides instructions for performing the Operability Test of the 225-WC Wastewater Sampling Station which monitors the discharge to the Treated Effluent Disposal Facility from the Plutonium Finishing Plant. This Operability Test Procedure (OTP) has been prepared to verify correct configuration and performance of the PFP Wastewater sampling system installed in Building 225-WC located outside the perimeter fence southeast of the Plutonium Finishing Plant (PFP). The objective of this test is to ensure the equipment in the sampling facility operates in a safe and reliable manner. The sampler consists of two Manning Model S-5000 units which are rate controlled by the Milltronics Ultrasonic flowmeter at manhole No.C4 and from a pH measuring system with the sensor in the stream adjacent to the sample point. The intent of the dual sampling system is to utilize one unit to sample continuously at a rate proportional to the wastewater flow rate so that the aggregate tests are related to the overall flow and thereby eliminate isolated analyses. The second unit will only operate during a high or low pH excursion of the stream (hence the need for a pH control). The major items in this OTP include testing of the Manning Sampler System and associated equipment including the pH measuring and control system, the conductivity monitor, and the flow meter

Mixing and sampling tests for Radiochemical Plant

International Nuclear Information System (INIS)

Ehinger, M.N.; Marfin, H.R.; Hunt, B.

1999-01-01

The paper describes results and test procedures used to evaluate uncertainly and basis effects introduced by the sampler systems of a radiochemical plant, and similar parameters associated with mixing. This report will concentrate on experiences at the Barnwell Nuclear Fuels Plant. Mixing and sampling tests can be conducted to establish the statistical parameters for those activities related to overall measurement uncertainties. Density measurements by state-of-the art, commercially availability equipment is the key to conducting those tests. Experience in the U.S. suggests the statistical contribution of mixing and sampling can be controlled to less than 0.01 % and with new equipment and new tests in operating facilities might be controlled to better accuracy [ru

Difficult Questions and Ambivalent Answers on Genetic Testing

Directory of Open Access Journals (Sweden)

Andréa Wiszmeg

2012-11-01

Full Text Available A qualitative pilot study on the attitudes of some citizens in southern Sweden toward predictive genetic testing – and a quantitative nation wide opinion poll targeting the same issues, was initiated by the Cultural Scientific Research Team of BAGADILICO. The latter is an international biomedical research environment on neurological disease at Lund University. The data of the two studies crystallized through analysis into themes around which the informants’ personal negotiations of opinions and emotions in relation to the topic centred: Concept of Risk,‘Relations and Moral Multi-layers, Worry, Agency and Autonomy, Authority, and Rationality versus Emotion. The studies indicate that even groups of people that beforehand are non-engaged in the issue, harbour complex and ambivalent emotions and opinions toward questions like this. A certain kind of situation bound pragmatism that with difficulty could be shown by quantitative methods alone emerges. This confirms our belief that methodological consideration of combining quantitative and qualitative methods is crucial for gaining a more complex representation of attitudes, as well as for problematizing the idea of a unified public open to inquiry.

40 CFR 205.171-3 - Test motorcycle sample selection.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Test motorcycle sample selection. 205... ABATEMENT PROGRAMS TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS Motorcycle Exhaust Systems § 205.171-3 Test motorcycle sample selection. A test motorcycle to be used for selective enforcement audit testing...

Test plan for core sampling drill bit temperature monitor

International Nuclear Information System (INIS)

Francis, P.M.

1994-01-01

At WHC, one of the functions of the Tank Waste Remediation System division is sampling waste tanks to characterize their contents. The push-mode core sampling truck is currently used to take samples of liquid and sludge. Sampling of tanks containing hard salt cake is to be performed with the rotary-mode core sampling system, consisting of the core sample truck, mobile exhauster unit, and ancillary subsystems. When drilling through the salt cake material, friction and heat can be generated in the drill bit. Based upon tank safety reviews, it has been determined that the drill bit temperature must not exceed 180 C, due to the potential reactivity of tank contents at this temperature. Consequently, a drill bit temperature limit of 150 C was established for operation of the core sample truck to have an adequate margin of safety. Unpredictable factors, such as localized heating, cause this buffer to be so great. The most desirable safeguard against exceeding this threshold is bit temperature monitoring . This document describes the recommended plan for testing the prototype of a drill bit temperature monitor developed for core sampling by Sandia National Labs. The device will be tested at their facilities. This test plan documents the tests that Westinghouse Hanford Company considers necessary for effective testing of the system

Estimation of sample size and testing power (part 5).

Science.gov (United States)

Hu, Liang-ping; Bao, Xiao-lei; Guan, Xue; Zhou, Shi-guo

2012-02-01

Estimation of sample size and testing power is an important component of research design. This article introduced methods for sample size and testing power estimation of difference test for quantitative and qualitative data with the single-group design, the paired design or the crossover design. To be specific, this article introduced formulas for sample size and testing power estimation of difference test for quantitative and qualitative data with the above three designs, the realization based on the formulas and the POWER procedure of SAS software and elaborated it with examples, which will benefit researchers for implementing the repetition principle.

Testing of Small Graphite Samples for Nuclear Qualification

Energy Technology Data Exchange (ETDEWEB)

Julie Chapman

2010-11-01

Accurately determining the mechanical properties of small irradiated samples is crucial to predicting the behavior of the overal irradiated graphite components within a Very High Temperature Reactor. The sample size allowed in a material test reactor, however, is limited, and this poses some difficulties with respect to mechanical testing. In the case of graphite with a larger grain size, a small sample may exhibit characteristics not representative of the bulk material, leading to inaccuracies in the data. A study to determine a potential size effect on the tensile strength was pursued under the Next Generation Nuclear Plant program. It focuses first on optimizing the tensile testing procedure identified in the American Society for Testing and Materials (ASTM) Standard C 781-08. Once the testing procedure was verified, a size effect was assessed by gradually reducing the diameter of the specimens. By monitoring the material response, a size effect was successfully identified.

The Relationship of Deep and Surface Study Approaches on Factual and Applied Test-Bank Multiple-Choice Question Performance

Science.gov (United States)

Yonker, Julie E.

2011-01-01

With the advent of online test banks and large introductory classes, instructors have often turned to textbook publisher-generated multiple-choice question (MCQ) exams in their courses. Multiple-choice questions are often divided into categories of factual or applied, thereby implicating levels of cognitive processing. This investigation examined…

Integrating IMS Learning Design and IMS Question and Test Interoperability using CopperCore Service Integration

NARCIS (Netherlands)

Vogten, Hubert; Martens, Harrie; Nadolski, Rob; Tattersall, Colin; Van Rosmalen, Peter; Koper, Rob

2006-01-01

Please, cite this publication as: Vogten, H., Martens, H., Nadolski, R., Tattersall, C., van Rosmalen, P., & Koper, R. (2006). Integrating IMS Learning Design and IMS Question and Test Interoperability using CopperCore Service Integration. Proceedings of International Workshop in Learning Networks

A One-Sample Test for Normality with Kernel Methods

OpenAIRE

Kellner , Jérémie; Celisse , Alain

2015-01-01

We propose a new one-sample test for normality in a Reproducing Kernel Hilbert Space (RKHS). Namely, we test the null-hypothesis of belonging to a given family of Gaussian distributions. Hence our procedure may be applied either to test data for normality or to test parameters (mean and covariance) if data are assumed Gaussian. Our test is based on the same principle as the MMD (Maximum Mean Discrepancy) which is usually used for two-sample tests such as homogeneity or independence testing. O...

Sample Processor for Life on Icy Worlds (SPLIce): Design and Test Results

Science.gov (United States)

Chinn, Tori N.; Lee, Anthony K.; Boone, Travis D.; Tan, Ming X.; Chin, Matthew M.; McCutcheon, Griffin C.; Horne, Mera F.; Padgen, Michael R.; Blaich, Justin T.; Forgione, Joshua B.;

40 CFR 205.160-2 - Test sample selection and preparation.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Test sample selection and preparation... sample selection and preparation. (a) Vehicles comprising the sample which are required to be tested... maintained in any manner unless such preparation, tests, modifications, adjustments or maintenance are part...

Educational testing, the question of the public good, and room for inclusion

DEFF Research Database (Denmark)

Ydesen, Christian; Au, Wayne

2018-01-01

Testing is a technological tool best addressed from within society at large, along with attendant questions of power, education access, education management, and social selection, rather than as an object to be treated in isolation. It has been argued that modern societies, in keeping...... of the two case countries, their political priorities differ. Scotland is oriented towards traditional social democratic welfare state values, arguing its links and commonalities with the Scandinavian and Baltic states. The United States, on the other hand, has largely embraced the neoliberal economic...

30 CFR 14.5 - Test samples.

Science.gov (United States)

2010-07-01

... MINING PRODUCTS REQUIREMENTS FOR THE APPROVAL OF FLAME-RESISTANT CONVEYOR BELTS General Provisions § 14.5 Test samples. Upon request by MSHA, the applicant must submit 3 precut, unrolled, flat conveyor belt...

Forward selection two sample binomial test

Science.gov (United States)

Wong, Kam-Fai; Wong, Weng-Kee; Lin, Miao-Shan

2016-01-01

Fisher’s exact test (FET) is a conditional method that is frequently used to analyze data in a 2 × 2 table for small samples. This test is conservative and attempts have been made to modify the test to make it less conservative. For example, Crans and Shuster (2008) proposed adding more points in the rejection region to make the test more powerful. We provide another way to modify the test to make it less conservative by using two independent binomial distributions as the reference distribution for the test statistic. We compare our new test with several methods and show that our test has advantages over existing methods in terms of control of the type 1 and type 2 errors. We reanalyze results from an oncology trial using our proposed method and our software which is freely available to the reader. PMID:27335577

Failure-censored accelerated life test sampling plans for Weibull distribution under expected test time constraint

International Nuclear Information System (INIS)

Bai, D.S.; Chun, Y.R.; Kim, J.G.

1995-01-01

This paper considers the design of life-test sampling plans based on failure-censored accelerated life tests. The lifetime distribution of products is assumed to be Weibull with a scale parameter that is a log linear function of a (possibly transformed) stress. Two levels of stress higher than the use condition stress, high and low, are used. Sampling plans with equal expected test times at high and low test stresses which satisfy the producer's and consumer's risk requirements and minimize the asymptotic variance of the test statistic used to decide lot acceptability are obtained. The properties of the proposed life-test sampling plans are investigated

Test of a sample container for shipment of small size plutonium samples with PAT-2

International Nuclear Information System (INIS)

Kuhn, E.; Aigner, H.; Deron, S.

1981-11-01

A light-weight container for the air transport of plutonium, to be designated PAT-2, has been developed in the USA and is presently undergoing licensing. The very limited effective space for bearing plutonium required the design of small size sample canisters to meet the needs of international safeguards for the shipment of plutonium samples. The applicability of a small canister for the sampling of small size powder and solution samples has been tested in an intralaboratory experiment. The results of the experiment, based on the concept of pre-weighed samples, show that the tested canister can successfully be used for the sampling of small size PuO 2 -powder samples of homogeneous source material, as well as for dried aliquands of plutonium nitrate solutions. (author)

Student teachers’ mathematical questioning and courage in metaphorical thinking learning

Science.gov (United States)

Hendriana, H.; Hidayat, W.; Ristiana, M. G.

2018-01-01

This study was designed in the form of experiments with control group design and post-test only which aimed to examine the role of metaphorical thinking learning in the mathematical questioning ability of student teachers based on the level of mathematical courage. The population of this study was student teachers of mathematics education study program in West Java Province, while the sample of this study was 152 student teachers which were set purposively and then randomly to be included in the experimental class and control class. Based on the results and discussion, it was concluded that: (a) the mathematical questioning ability of student teachers who received Metaphorical Thinking learning was better than those who received conventional learning seen from mathematical courage level; (b) learning and mathematical courage level factors affected the achievement of student teachers’ mathematical questioning ability. In addition, there was no interaction effect between learning and mathematical courage level (high, medium, and low) simultaneously in developing student teachers’ mathematical questioning ability; (c) achievement of mastering mathematical questioning ability of student teacher was still not well achieved on indicator of problem posing in the form of non-routine question and open question.

Socratic Questioning-Guided Discovery

Directory of Open Access Journals (Sweden)

M. Hakan Türkçapar

2012-04-01

Full Text Available “Socratic Method” is a way of teaching philosophical thinking and knowledge by asking questions which was used by antique period greek philosopher Socrates. Socrates was teaching knowledge to his followers by asking questions and the conversation between them was named “Socratic Dialogues”. In this meaning, no novel knowledge is taught to the individual but only what is formerly known is reminded and rediscovered. The form of socratic questioning which is used during the process of cognitive behavioral therapy is known as Guided Discovery. In this method it is aimed to make the client notice the piece of knowledge which he could notice but is not aware with a series of questions. Socratic method or guided discovery consists of several steps which are: Identifying the problem by listening to the client and making reflections, finding alternatives by examining and evaluating, reidentification by using the newly found information and questioning the old distorted belief and reaching to a conclusion and applying it. Question types used during these procedures are, questions for gaining information, questions revealing the meanings, questions revealing the beliefs, questions about behaviours during the similar past experiences, analyse questions and analytic synthesis questions. In order to make the patient feel understood it is important to be empathetic and summarising the problem during the interview. In this text, steps of Socratic Questioning-Guided Discovery will be reviewed with sample dialogues after eachstep. [JCBPR 2012; 1(1.000: 15-20

Effect of two types of control questions and two question formats on the outcomes of polygraph examinations.

Science.gov (United States)

Horvath, Frank; Palmatier, John J

2008-07-01

Two major variations of polygraph "Control Question" testing, the Zone Comparison (ZoC) and the Modified General Question Test (MGQT) were evaluated. Within each, the type of control question, Exclusive or "time bar" (e.g., "Before you were 21, did you ever...") and Nonexclusive or "no time bar" (e.g., "Did you ever....?") was manipulated in a mock theft scenario, with 80 male and 40 female subjects randomly assigned to be either innocent or guilty. Polygraphic data collected by experienced field examiners were numerically scored by an evaluator blind to all aspects of the study. Decision accuracy was not related to the type of procedure (ZoC/MGQT) used or the subject's sex. Accuracy was significantly related to the type of control question [chi(2) (2) = 11.46, p = 0.003; tau c = 0.29]. Nonexclusive control questions produced greater accuracy than Exclusive control questions on both innocent and guilty subjects. These results and subjects' self-reports support the general "theory" on which control question (CQ) testing is based. The need for better empirical support of accepted dogma and current field practices is strongly indicated by these findings.

Importance of questionnaire context for a physical activity question

DEFF Research Database (Denmark)

Jørgensen, M. E.; Sørensen, Mette Rosenlund; Ekholm, O.

2013-01-01

; however, this has never been shown for physical activity questions. The aim was to study the influence of different formulations and question order on self-report physical activity in a population-based health interview survey. Four samples of each 1000 adults were drawn at random from the National Person......Adequate information about physical activity habits is essential for surveillance, implementing, and evaluating public health initiatives in this area. Previous studies have shown that question order and differences in wording result in systematic differences in people's responses to questionnaires...... Register. A new question about physical activity was included with minor differences in formulations in samples 1–3. Furthermore, the question in sample 2 was included in sample 4 but was placed in the end of the questionnaire. The mean time spent on moderate physical activity varied between the four...

Outgassing tests on iras solar panel samples

Science.gov (United States)

Premat, G.; Zwaal, A.; Pennings, N. H.

1980-01-01

Several outgassing tests were carried out on representative solar panel samples in order to determine the extent of contamination that could be expected from this source. The materials for the construction of the solar panels were selected as a result of contamination obtained in micro volatile condensable materials tests.

Intrusive sampling and testing of ferrocyanide tanks, Hanford Site, Richland, Washington: Environmental Assessment

International Nuclear Information System (INIS)

1992-02-01

The proposed action involves intrusive sampling and testing of 24 Hanford Site single-shell waste tanks that contain ferrocyanide-nitrate/nitrite mixtures to determine the physical and chemical properties of the waste material. The Department of Energy (DOE) needs to take this action to help define the required controls to prevent or mitigate the potential for an accident during future characterization and monitoring of these tanks. Given the Unreviewed Safety Question associated with the consequences of a potential ferrocyanide nitrate/nitrite reaction, two safety assessments and this environmental assessment (EA) have been prepared to help ensure that the proposed action is conducted in a safe and environmentally sound manner. Standard operating procedures for sampling high-level waste tanks have been revised to reflect the potential presence of flammable or explosive mixtures in the waste. The proposed action would be conducted using nonsparking materials, spark resistant tools, and a portable containment enclosure (greenhouse) and plastic ground cover. The proposed activities involving Hanford Site ferrocyanide-containing tanks would be on land dedicated to DOE waste management

Testing Homogeneity in a Semiparametric Two-Sample Problem

Directory of Open Access Journals (Sweden)

Yukun Liu

2012-01-01

Full Text Available We study a two-sample homogeneity testing problem, in which one sample comes from a population with density f(x and the other is from a mixture population with mixture density (1−λf(x+λg(x. This problem arises naturally from many statistical applications such as test for partial differential gene expression in microarray study or genetic studies for gene mutation. Under the semiparametric assumption g(x=f(xeα+βx, a penalized empirical likelihood ratio test could be constructed, but its implementation is hindered by the fact that there is neither feasible algorithm for computing the test statistic nor available research results on its theoretical properties. To circumvent these difficulties, we propose an EM test based on the penalized empirical likelihood. We prove that the EM test has a simple chi-square limiting distribution, and we also demonstrate its competitive testing performances by simulations. A real-data example is used to illustrate the proposed methodology.

A Fault Sample Simulation Approach for Virtual Testability Demonstration Test

Institute of Scientific and Technical Information of China (English)

ZHANG Yong; QIU Jing; LIU Guanjun; YANG Peng

2012-01-01

Virtual testability demonstration test has many advantages,such as low cost,high efficiency,low risk and few restrictions.It brings new requirements to the fault sample generation.A fault sample simulation approach for virtual testability demonstration test based on stochastic process theory is proposed.First,the similarities and differences of fault sample generation between physical testability demonstration test and virtual testability demonstration test are discussed.Second,it is pointed out that the fault occurrence process subject to perfect repair is renewal process.Third,the interarrival time distribution function of the next fault event is given.Steps and flowcharts of fault sample generation are introduced.The number of faults and their occurrence time are obtained by statistical simulation.Finally,experiments are carried out on a stable tracking platform.Because a variety of types of life distributions and maintenance modes are considered and some assumptions are removed,the sample size and structure of fault sample simulation results are more similar to the actual results and more reasonable.The proposed method can effectively guide the fault injection in virtual testability demonstration test.

Questions of Brain Hemispheric Specialization and Gender Difference in Spatial Tests.

Science.gov (United States)

McWhinnie, Harold J.

This paper presents a review of selected literature relevant to a general question of hemispheric specialization (right or left brain) and questions of gender differences in spatial abilities among a group of art students. Three basic questions for discussion are proposed: (1) is there a relationship between hemispheric dominance and spatial…

Testing Audiovisual Comprehension Tasks with Questions Embedded in Videos as Subtitles: A Pilot Multimethod Study

Science.gov (United States)

Núñez, Juan Carlos Casañ

2017-01-01

Listening, watching, reading and writing simultaneously in a foreign language is very complex. This paper is part of wider research which explores the use of audiovisual comprehension questions imprinted in the video image in the form of subtitles and synchronized with the relevant fragments for the purpose of language learning and testing.…

Data Quality Objectives For Selecting Waste Samples To Test The Fluid Bed Steam Reformer Test

International Nuclear Information System (INIS)

Banning, D.L.

2010-01-01

This document describes the data quality objectives to select archived samples located at the 222-S Laboratory for Fluid Bed Steam Reformer testing. The type, quantity and quality of the data required to select the samples for Fluid Bed Steam Reformer testing are discussed. In order to maximize the efficiency and minimize the time to treat Hanford tank waste in the Waste Treatment and Immobilization Plant, additional treatment processes may be required. One of the potential treatment processes is the fluid bed steam reformer (FBSR). A determination of the adequacy of the FBSR process to treat Hanford tank waste is required. The initial step in determining the adequacy of the FBSR process is to select archived waste samples from the 222-S Laboratory that will be used to test the FBSR process. Analyses of the selected samples will be required to confirm the samples meet the testing criteria.

Acceptance test report for core sample trucks 3 and 4

International Nuclear Information System (INIS)

Corbett, J.E.

1996-01-01

The purpose of this Acceptance Test Report is to provide documentation for the acceptance testing of the rotary mode core sample trucks 3 and 4, designated as HO-68K-4600 and HO-68K-4647, respectively. This report conforms to the guidelines established in WHC-IP-1026, ''Engineering Practice Guidelines,'' Appendix M, ''Acceptance Test Procedures and Reports.'' Rotary mode core sample trucks 3 and 4 were based upon the design of the second core sample truck (HO-68K-4345) which was constructed to implement rotary mode sampling of the waste tanks at Hanford. Successful completion of acceptance testing on June 30, 1995 verified that all design requirements were met. This report is divided into four sections, beginning with general information. Acceptance testing was performed on trucks 3 and 4 during the months of March through June, 1995. All testing was performed at the ''Rock Slinger'' test site in the 200 West area. The sequence of testing was determined by equipment availability, and the initial revision of the Acceptance Test Procedure (ATP) was used for both trucks. Testing was directed by ICF-KH, with the support of WHC Characterization Equipment Engineering and Characterization Project Operations. Testing was completed per the ATP without discrepancies or deviations, except as noted

Optimum sample size allocation to minimize cost or maximize power for the two-sample trimmed mean test.

Science.gov (United States)

Guo, Jiin-Huarng; Luh, Wei-Ming

2009-05-01

When planning a study, sample size determination is one of the most important tasks facing the researcher. The size will depend on the purpose of the study, the cost limitations, and the nature of the data. By specifying the standard deviation ratio and/or the sample size ratio, the present study considers the problem of heterogeneous variances and non-normality for Yuen's two-group test and develops sample size formulas to minimize the total cost or maximize the power of the test. For a given power, the sample size allocation ratio can be manipulated so that the proposed formulas can minimize the total cost, the total sample size, or the sum of total sample size and total cost. On the other hand, for a given total cost, the optimum sample size allocation ratio can maximize the statistical power of the test. After the sample size is determined, the present simulation applies Yuen's test to the sample generated, and then the procedure is validated in terms of Type I errors and power. Simulation results show that the proposed formulas can control Type I errors and achieve the desired power under the various conditions specified. Finally, the implications for determining sample sizes in experimental studies and future research are discussed.

Tests on CANDU fuel elements sheath samples

International Nuclear Information System (INIS)

Ionescu, S.; Uta, O.; Mincu, M.; Prisecaru, I.

2016-01-01

This work is a study of the behavior of CANDU fuel elements after irradiation. The tests are made on ring samples taken from fuel cladding in INR Pitesti. This paper presents the results of examinations performed in the Post Irradiation Examination Laboratory. By metallographic and ceramographic examination we determinate that the hydride precipitates are orientated parallel to the cladding surface. A content of hydrogen of about 120 ppm was estimated. After the preliminary tests, ring samples were cut from the fuel rod, and were subject of tensile test on an INSTRON 5569 model machine in order to evaluate the changes of their mechanical properties as consequence of irradiation. Scanning electron microscopy was performed on a microscope model TESCAN MIRA II LMU CS with Schottky FE emitter and variable pressure. The analysis shows that the central zone has deeper dimples, whereas on the outer zone, the dimples are tilted and smaller. (authors)

Accuracy of questions related to allergic contact dermatitis.

Science.gov (United States)

Fleming, C J; Burden, A D; Forsyth, A

2000-12-01

The ability of a physician to select individuals likely to benefit from patch testing depends on his or her ability to interpret responses to enquiries related to contact allergy. The significance of such responses to questions of nickel, fragrance and colophon allergy is unclear. The specificity, sensitivity and predictive value of questions relating to nickel, fragrance and colophony allergy were determined. A total of 258 patients attending for routine patch testing were questioned about skin reactions to nickel, fragrances and Elastoplast (Smith and Nephew Healthcare, Hull, England). All subjects were then patch tested to nickel, fragrance mix, and colophony. Responses to questions were compared with patch test results. The sensitivity of questions relating to nickel, fragrance, and colophony was 82%, 49%, and 71%, respectively. The specificity of the same questions was 77%, 79%, and 90%; the positive predictive value was 54%, 46% and 29%, respectively. After adjustment to include clinical relevance, the sensitivity of nickel questions rose to 100%. These data permit greater understanding of the role of patient history in selection of patients for patch testing. Copyright 2000 by W.B. Saunders Company

Preliminary Process Theory does not validate the Comparison Question Test: A comment on Palmatier and Rovner

NARCIS (Netherlands)

Ben-Shakar, G.; Gamer, M.; Iacono, W.; Meijer, E.; Verschuere, B.

2015-01-01

Palmatier and Rovner (2015) attempt to establish the construct validity of the Comparison Question Test (CQT) by citing extensive research ranging from modern neuroscience to memory and psychophysiology. In this comment we argue that merely citing studies on the preliminary process theory (PPT) of

On Wasserstein Two-Sample Testing and Related Families of Nonparametric Tests

Directory of Open Access Journals (Sweden)

Aaditya Ramdas

2017-01-01

Full Text Available Nonparametric two-sample or homogeneity testing is a decision theoretic problem that involves identifying differences between two random variables without making parametric assumptions about their underlying distributions. The literature is old and rich, with a wide variety of statistics having being designed and analyzed, both for the unidimensional and the multivariate setting. Inthisshortsurvey,wefocusonteststatisticsthatinvolvetheWassersteindistance. Usingan entropic smoothing of the Wasserstein distance, we connect these to very different tests including multivariate methods involving energy statistics and kernel based maximum mean discrepancy and univariate methods like the Kolmogorov–Smirnov test, probability or quantile (PP/QQ plots and receiver operating characteristic or ordinal dominance (ROC/ODC curves. Some observations are implicit in the literature, while others seem to have not been noticed thus far. Given nonparametric two-sample testing’s classical and continued importance, we aim to provide useful connections for theorists and practitioners familiar with one subset of methods but not others.

Questioning the Questions

Science.gov (United States)

Tienken, Christopher H.; Goldberg, Stephanie; DiRocco, Dominic

2010-01-01

Historical accounts of questioning used in the education process trace back to Socrates. One of the best examples of his use of questioning is found in Plato's "The Republic." Socrates used a series of strategic questions to help his student Glaucon come to understand the concept of justice. Socrates purposefully posed a series of…

Questões discursivas para avaliação escolar = Open-ended questions in school tests

Directory of Open Access Journals (Sweden)

Maria Auxiliadora Bezerra

2008-07-01

Full Text Available O objetivo deste artigo é descrever questões discursivas presentes em atividades escolares do Ensino Médio para avaliação da aprendizagem. Foram estudadas, à luz de teorias sobre atividades e tarefas escolares (Chartrand, 2002, sobre elaboração de provas eexercícios (Moretto, 2005; Bloom, 1973 e sobre perguntas de compreensão (Marcuschi, 1996, 93 questões recolhidas nas disciplinas Literatura Brasileira, História e Geografia. Foram descritas questões (descontextualizadas, propondo, do ponto de vista cognitivo,tarefas funcionais (predominantes, seguidas de formativas e metacognitivas. Seus comandos são dados por meio de pronomes interrogativos (principalmente e de verbos no imperativo ou no infinitivo. As questões focalizam os conteúdos específicos das disciplinas, privilegiando seus conceitos, e enfatizam o desenvolvimento cognitivo dos alunos, sem relação com aspectos sociais. Parece ser suficiente a demonstração passiva de conhecimentoscomo resultado de uma aprendizagem correspondente a acúmulo de informações e de um ensino entendido como repasse de dados.Open-ended questions in high school activities are described to evaluate the learning process. Ninety-three questions fromBrazilian Literature, History and Geography were analyzed, based on school activity and task theories (Chartrand, 2002, test and exercise theories (Moretto, 2005; Bloom, 1973, and comprehension question theories (Marcuschi, 1996. (Decontextualized questions,which propose (predominantly functional, formative and metacognitive tasks, were described from the cognitive point-of-view. Question instructions were given by using (mainly interrogative pronouns and verbs either in the infinitive or in the imperative. Questions focus on the specific contents of the subject matter, emphasizing concepts and the students’ cognitive development, regardless of social aspects. Passive demonstration of knowledge as a result of learning related to collected passive

On the placement of practice questions during study.

Science.gov (United States)

Weinstein, Yana; Nunes, Ludmila D; Karpicke, Jeffrey D

2016-03-01

Retrieval practice improves retention of information on later tests. A question remains: When should retrieval occur during learning-interspersed throughout study or at the end of each study period? In a lab experiment, an online experiment, and a classroom study, we aimed to determine the ideal placement (interspersed vs. at-the-end) of retrieval practice questions. In the lab experiment, 64 subjects viewed slides about APA style and answered short-answer practice questions about the content or restudied the slides (restudy condition). The practice questions either appeared 1 every 1-2 slides (interspersed condition), or all at the end of the presentation (at-the-end condition). One week later, subjects returned and answered the same questions on a final test. In the online experiment, 175 subjects completed the same procedure. In the classroom study, 62 undergraduate students took quizzes as part of class lectures. Short-answer practice questions appeared either throughout the lectures (interspersed condition) or at the end of the lectures (at-the-end condition). Nineteen days after the last quiz, students were given a surprise final test. Results from the 3 experiments converge in demonstrating an advantage for interspersing practice questions on the initial tests, but an absence of this advantage on the final test. (c) 2016 APA, all rights reserved).

Identifying harmful drinking using a single screening question in a psychiatric consultation-liaison population.

Science.gov (United States)

Massey, Suena H; Norris, Lorenzo; Lausin, Melissa; Nwaneri, Chinyere; Lieberman, Daniel Z

2011-01-01

Harmful drinking is common in medical inpatients, yet commonly missed due in part to time pressures. A screening question about past year heavy drinking recommended by the National Institute on Alcohol Abuse and Alcoholism (NIAAA) has been validated in primary care and emergency room settings. We tested the psychometric properties of a modified single screening question (SSQ) in hospitalized patients referred to a consultation-liaison service. A psychiatry attending (n = 40), a psychiatry resident (n = 30) and a medical student (n = 30) administered the SSQ, followed by a self-report 10-item Alcohol Use Disorders Identification Test (AUDIT) to a sample of 100 consultation-liaison patients who were able to give informed consent for participation. Using the AUDIT as a reference, the sensitivity and specificity of the SSQ to detect harmful drinking in this sample were .96 and .82, respectively. Gender differences in specificity were not found. The single question also had a strong correlation with dependence (r(b) = .457, p past year heavy drinking can rapidly identify harmful drinking in alert nonpsychotic consultation-liaison patients. Copyright © 2011 The Academy of Psychosomatic Medicine. Published by Elsevier Inc. All rights reserved.

Estimation of sample size and testing power (Part 3).

Science.gov (United States)

Hu, Liang-ping; Bao, Xiao-lei; Guan, Xue; Zhou, Shi-guo

2011-12-01

This article introduces the definition and sample size estimation of three special tests (namely, non-inferiority test, equivalence test and superiority test) for qualitative data with the design of one factor with two levels having a binary response variable. Non-inferiority test refers to the research design of which the objective is to verify that the efficacy of the experimental drug is not clinically inferior to that of the positive control drug. Equivalence test refers to the research design of which the objective is to verify that the experimental drug and the control drug have clinically equivalent efficacy. Superiority test refers to the research design of which the objective is to verify that the efficacy of the experimental drug is clinically superior to that of the control drug. By specific examples, this article introduces formulas of sample size estimation for the three special tests, and their SAS realization in detail.

Group SkSP-R sampling plan for accelerated life tests

Indian Academy of Sciences (India)

Muhammad Aslam

2017-09-15

Sep 15, 2017 ... SkSP-R sampling; life test; Weibull distribution; producer's risk; ... designed a sampling plan under a time-truncated life test .... adjusted using an acceleration factor. ... where P is the probability of lot acceptance for a single.

Adaptive designs for the one-sample log-rank test.

Science.gov (United States)

Schmidt, Rene; Faldum, Andreas; Kwiecien, Robert

2017-09-22

Traditional designs in phase IIa cancer trials are single-arm designs with a binary outcome, for example, tumor response. In some settings, however, a time-to-event endpoint might appear more appropriate, particularly in the presence of loss to follow-up. Then the one-sample log-rank test might be the method of choice. It allows to compare the survival curve of the patients under treatment to a prespecified reference survival curve. The reference curve usually represents the expected survival under standard of the care. In this work, convergence of the one-sample log-rank statistic to Brownian motion is proven using Rebolledo's martingale central limit theorem while accounting for staggered entry times of the patients. On this basis, a confirmatory adaptive one-sample log-rank test is proposed where provision is made for data dependent sample size reassessment. The focus is to apply the inverse normal method. This is done in two different directions. The first strategy exploits the independent increments property of the one-sample log-rank statistic. The second strategy is based on the patient-wise separation principle. It is shown by simulation that the proposed adaptive test might help to rescue an underpowered trial and at the same time lowers the average sample number (ASN) under the null hypothesis as compared to a single-stage fixed sample design. © 2017, The International Biometric Society.

A two-sample Bayesian t-test for microarray data

Directory of Open Access Journals (Sweden)

Dimmic Matthew W

2006-03-01

Full Text Available Abstract Background Determining whether a gene is differentially expressed in two different samples remains an important statistical problem. Prior work in this area has featured the use of t-tests with pooled estimates of the sample variance based on similarly expressed genes. These methods do not display consistent behavior across the entire range of pooling and can be biased when the prior hyperparameters are specified heuristically. Results A two-sample Bayesian t-test is proposed for use in determining whether a gene is differentially expressed in two different samples. The test method is an extension of earlier work that made use of point estimates for the variance. The method proposed here explicitly calculates in analytic form the marginal distribution for the difference in the mean expression of two samples, obviating the need for point estimates of the variance without recourse to posterior simulation. The prior distribution involves a single hyperparameter that can be calculated in a statistically rigorous manner, making clear the connection between the prior degrees of freedom and prior variance. Conclusion The test is easy to understand and implement and application to both real and simulated data shows that the method has equal or greater power compared to the previous method and demonstrates consistent Type I error rates. The test is generally applicable outside the microarray field to any situation where prior information about the variance is available and is not limited to cases where estimates of the variance are based on many similar observations.

Bovine milk sampling efficiency for pregnancy-associated glycoproteins (PAG) detection test

Energy Technology Data Exchange (ETDEWEB)

Silva, H. K. da; Cassoli, L.D.; Pantoja, J.F.C.; Cerqueira, P.H.R.; Coitinho, T.B.; Machado, P.F.

2016-07-01

Two experiments were conducted to verify whether the time of day at which a milk sample is collected and the possible carryover in the milking system may affect pregnancy-associated glycoproteins (PAG) levels and, consequently, the pregnancy test results in dairy cows. In experiment one, we evaluated the effect of time of day at which the milk sample is collected from 51 cows. In experiment two, which evaluated the possible occurrence of carryover in the milk meter milking system, milk samples from 94 cows belonging to two different farms were used. The samples were subjected to pregnancy test using ELISA methodology to measure PAG concentrations and to classify the samples as positive (pregnant), negative (nonpregnant), or suspicious (recheck). We found that the time of milking did not affect the PAG levels. As to the occurrence of carryover in the milk meter, the PAG levels of the samples collected from Farm-2 were heavily influenced by a carryover effect compared with the samples from Farm-1. Thus, milk samples submitted to a pregnancy test can be collected during the morning or the evening milking. When the sample is collected from the milk meters, periodic equipment maintenance should be noted, including whether the milk meter is totally drained between different animals’ milking and equipment cleaning between milking is performed correctly to minimize the occurrence of carryover, thereby avoiding the effect on PAG levels and, consequently, the pregnancy test results. Therefore, a single milk sample can be used for both milk quality tests and pregnancy test.

Bovine milk sampling efficiency for pregnancy-associated glycoproteins (PAG) detection test

International Nuclear Information System (INIS)

Silva, H. K. da; Cassoli, L.D.; Pantoja, J.F.C.; Cerqueira, P.H.R.; Coitinho, T.B.; Machado, P.F.

2016-01-01

Two experiments were conducted to verify whether the time of day at which a milk sample is collected and the possible carryover in the milking system may affect pregnancy-associated glycoproteins (PAG) levels and, consequently, the pregnancy test results in dairy cows. In experiment one, we evaluated the effect of time of day at which the milk sample is collected from 51 cows. In experiment two, which evaluated the possible occurrence of carryover in the milk meter milking system, milk samples from 94 cows belonging to two different farms were used. The samples were subjected to pregnancy test using ELISA methodology to measure PAG concentrations and to classify the samples as positive (pregnant), negative (nonpregnant), or suspicious (recheck). We found that the time of milking did not affect the PAG levels. As to the occurrence of carryover in the milk meter, the PAG levels of the samples collected from Farm-2 were heavily influenced by a carryover effect compared with the samples from Farm-1. Thus, milk samples submitted to a pregnancy test can be collected during the morning or the evening milking. When the sample is collected from the milk meters, periodic equipment maintenance should be noted, including whether the milk meter is totally drained between different animals’ milking and equipment cleaning between milking is performed correctly to minimize the occurrence of carryover, thereby avoiding the effect on PAG levels and, consequently, the pregnancy test results. Therefore, a single milk sample can be used for both milk quality tests and pregnancy test.

Quality standards for sample collection in coagulation testing.

Science.gov (United States)

Lippi, Giuseppe; Salvagno, Gian Luca; Montagnana, Martina; Lima-Oliveira, Gabriel; Guidi, Gian Cesare; Favaloro, Emmanuel J

2012-09-01

Preanalytical activities, especially those directly connected with blood sample collection and handling, are the most vulnerable steps throughout the testing process. The receipt of unsuitable samples is commonplace in laboratory practice and represents a serious problem, given the reliability of test results can be adversely compromised following analysis of these specimens. The basic criteria for an appropriate and safe venipuncture are nearly identical to those used for collecting blood for clinical chemistry and immunochemistry testing, and entail proper patient identification, use of the correct technique, as well as appropriate devices and needles. There are, however, some peculiar aspects, which are deemed to be particularly critical when collecting quality specimens for clot-based tests, and these require clearer recognition. These include prevention of prolonged venous stasis, collection of nonhemolyzed specimens, order of draw, and appropriate filling and mixing of the primary collection tubes. All of these important preanalytical issues are discussed in this article, and evidence-based suggestions as well as recommendations on how to obtain a high-quality sample for coagulation testing are also illustrated. We have also performed an investigation aimed to identify variation of test results due to underfilling of primary blood tubes, and have identified a clinically significant bias in test results when tubes are drawn at less than 89% of total fill for activated partial thromboplastin time, less than 78% for fibrinogen, and less than 67% for coagulation factor VIII, whereas prothrombin time and activated protein C resistance remain relatively reliable even in tubes drawn at 67% of the nominal volume. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Mineralogic and petrologic investigation of post-test core samples from the Spent Fuel Test - Climax

International Nuclear Information System (INIS)

Ryerson, F.J.; Beiriger, J.

1985-02-01

We have characterized a suite of samples taken subsequent to the end of the Spent Fuel Test - Climax by petrographic and microanalytical techniques and determined their mineral assemblage, modal properties, and mineral chemistry. The samples were obtained immediately adjacent to the canister borehole at a variety of depths and positions within the canister drift, as well as radially outward from each canister hole. This method of sampling allows variations in post-test mineralogic properties to be evaluated on the basis of (1) depth along a particular canister hole and (2) position within the canister drift, with respect to the heat and radiation sources, and with respect to the pre - test samples. In no case did we find any significant correlation between the mineralogical properties and variables listed above. In short, the Spent Fuel Test - Climax has produced no identifiable mineralogical response in the Climax quartz monzonite. 12 refs., 11 figs., 5 tabs

ISOLOK VALVE ACCEPTANCE TESTING FOR DWPF SME SAMPLING PROCESS

Energy Technology Data Exchange (ETDEWEB)

Edwards, T.; Hera, K.; Coleman, C.; Jones, M.; Wiedenman, B.

2011-12-05

Evaluation of the Defense Waste Processing Facility (DWPF) Chemical Process Cell (CPC) cycle time identified several opportunities to improve the CPC processing time. Of the opportunities, a focus area related to optimizing the equipment and efficiency of the sample turnaround time for DWPF Analytical Laboratory was identified. The Mechanical Systems & Custom Equipment Development (MS&CED) Section of the Savannah River National Laboratory (SRNL) evaluated the possibility of using an Isolok{reg_sign} sampling valve as an alternative to the Hydragard{reg_sign} valve for taking process samples. Previous viability testing was conducted with favorable results using the Isolok sampler and reported in SRNL-STI-2010-00749 (1). This task has the potential to improve operability, reduce maintenance time and decrease CPC cycle time. This report summarizes the results from acceptance testing which was requested in Task Technical Request (TTR) HLW-DWPF-TTR-2010-0036 (2) and which was conducted as outlined in Task Technical and Quality Assurance Plan (TTQAP) SRNL-RP-2011-00145 (3). The Isolok to be tested is the same model which was tested, qualified, and installed in the Sludge Receipt Adjustment Tank (SRAT) sample system. RW-0333P QA requirements apply to this task. This task was to qualify the Isolok sampler for use in the DWPF Slurry Mix Evaporator (SME) sampling process. The Hydragard, which is the current baseline sampling method, was used for comparison to the Isolok sampling data. The Isolok sampler is an air powered grab sampler used to 'pull' a sample volume from a process line. The operation of the sampler is shown in Figure 1. The image on the left shows the Isolok's spool extended into the process line and the image on the right shows the sampler retracted and then dispensing the liquid into the sampling container. To determine tank homogeneity, a Coliwasa sampler was used to grab samples at a high and low location within the mixing tank. Data from

Urine Tests (For Parents)

Science.gov (United States)

... the urine sample. In certain situations, a sterile bag can be placed around a baby’s diaper area to collect a urine sample. If you have any questions about urine tests, talk with your doctor. Reviewed by: Yamini Durani, MD ...

Provider Initiated Testing and Counseling (PITC for HIV in resource-limited clinical settings: important questions unanswered

Directory of Open Access Journals (Sweden)

Peter Twyman

2009-09-01

Full Text Available Testing is the gateway to HIV care and support services, and efforts to broaden treatment must include a proactive and inclusive approach to testing. Provider Initiated Testing and Counseling (PITC for HIV utilizes the opportunity afforded by the clinical encounter for the care provider to make a clinical recommendation that the patient have a voluntary HIV test. It is hoped that by broadening testing by such strategies as PITC more patients may be identified and linked to treatment and support. However, there exist multiple challenges and questions regarding the provision of routine HIV testing and counseling in clinical facilities. In order to support further PITC efforts and scale up of current testing programs, a research agenda that addresses the ethical, social and operational components of PITC programming in health facilities, is critically needed to further guide its expansion.

CHARACTERIZATION AND ACTUAL WASTE TEST WITH TANK 5F SAMPLES

International Nuclear Information System (INIS)

Fletcher, D.

2007-01-01

The initial phase of bulk waste removal operations was recently completed in Tank 5F. Video inspection of the tank indicates several mounds of sludge still remain in the tank. Additionally, a mound of white solids was observed under Riser 5. In support of chemical cleaning and heel removal programs, samples of the sludge and the mound of white solids were obtained from the tank for characterization and testing. A core sample of the sludge and Super Snapper sample of the white solids were characterized. A supernate dip sample from Tank 7F was also characterized. A portion of the sludge was used in two tank cleaning tests using oxalic acid at 50 C and 75 C. The filtered oxalic acid from the tank cleaning tests was subsequently neutralized by addition to a simulated Tank 7F supernate. Solids and liquid samples from the tank cleaning test and neutralization test were characterized. A separate report documents the results of the gas generation from the tank cleaning test using oxalic acid and Tank 5F sludge. The characterization results for the Tank 5F sludge sample (FTF-05-06-55) appear quite good with respect to the tight precision of the sample replicates, good results for the glass standards, and minimal contamination found in the blanks and glass standards. The aqua regia and sodium peroxide fusion data also show good agreement between the two dissolution methods. Iron dominates the sludge composition with other major contributors being uranium, manganese, nickel, sodium, aluminum, and silicon. The low sodium value for the sludge reflects the absence of supernate present in the sample due to the core sampler employed for obtaining the sample. The XRD and CSEM results for the Super Snapper salt sample (i.e., white solids) from Tank 5F (FTF-05-07-1) indicate the material contains hydrated sodium carbonate and bicarbonate salts along with some aluminum hydroxide. These compounds likely precipitated from the supernate in the tank. A solubility test showed the material

Comparison between Two Assessment Methods; Modified Essay Questions and Multiple Choice Questions

Directory of Open Access Journals (Sweden)

Assadi S.N.* MD

2015-09-01

Full Text Available Aims Using the best assessment methods is an important factor in educational development of health students. Modified essay questions and multiple choice questions are two prevalent methods of assessing the students. The aim of this study was to compare two methods of modified essay questions and multiple choice questions in occupational health engineering and work laws courses. Materials & Methods This semi-experimental study was performed during 2013 to 2014 on occupational health students of Mashhad University of Medical Sciences. The class of occupational health and work laws course in 2013 was considered as group A and the class of 2014 as group B. Each group had 50 students.The group A students were assessed by modified essay questions method and the group B by multiple choice questions method.Data were analyzed in SPSS 16 software by paired T test and odd’s ratio. Findings The mean grade of occupational health and work laws course was 18.68±0.91 in group A (modified essay questions and was 18.78±0.86 in group B (multiple choice questions which was not significantly different (t=-0.41; p=0.684. The mean grade of chemical chapter (p<0.001 in occupational health engineering and harmful work law (p<0.001 and other (p=0.015 chapters in work laws were significantly different between two groups. Conclusion Modified essay questions and multiple choice questions methods have nearly the same student assessing value for the occupational health engineering and work laws course.

KEMAMPUAN MAHASISWA DALAM MEMBUAT COMPREHENSION QUESTIONS

Directory of Open Access Journals (Sweden)

Pudiyono Pudiyono

2016-10-01

Full Text Available The aims of the research were to find out (a the level of the students’ ability in making comprehension questions, (b the students’ map of problems in making comprehension questions. The population of the research was all students joining Reading 4 academic year 2016, totaling to 30 students, while the sample was taken from all students. The result of data analysis showed that the average ability of the students, with score more than 70 reached 66.66%. In details, only 4 of the samples (13.33% got no wrong answers or an A. Those who got good achievement (B, considered as majority, amounted to 16 students (53.33%. The participants achieving enough grades (C reached 7 students or 23.33%. The last level achieved in this research was D with the number reaching 3 (10%. The map of problems laid on their inability in identifying between yes/no and WH questions, inverted sentence, choosing the right auxiliary and verbs and their spelling ability. Keyword: comprehension, questions, inversion, problem map, ability

Improving the identification accuracy of senior witnesses: do prelineup questions and sequential testing help?

Science.gov (United States)

Memon, Amina; Gabbert, Fiona

2003-04-01

Eyewitness research has identified sequential lineup testing as a way of reducing false lineup choices while maintaining accurate identifications. The authors examined the usefulness of this procedure for reducing false choices in older adults. Young and senior witnesses viewed a crime video and were later presented with target present orabsent lineups in a simultaneous or sequential format. In addition, some participants received prelineup questions about their memory for a perpetrator's face and about their confidence in their ability to identify the culprit or to correctly reject the lineup. The sequential lineup reduced false choosing rates among young and older adults in target-absent conditions. In target-present conditions, sequential testing significantly reduced the correct identification rate in both age groups.

Test plan for evaluating the performance of the in-tank fluidic sampling system

International Nuclear Information System (INIS)

BOGER, R.M.

1999-01-01

The PHMC will provide Low Activity Wastes (LAW) tank wastes for final treatment by a privatization contractor from double-shell feed tanks, 241-AP-102 and 241-AP-104, Concerns about the inability of the baseline ''grab'' sampling to provide large volume samples within time constraints has led to the development of a conceptual sampling system that would be deployed in a feed tank riser, This sampling system will provide large volume, representative samples without the environmental, radiation exposure, and sample volume impacts of the current base-line ''grab'' sampling method. This test plan identifies ''proof-of-principle'' cold tests for the conceptual sampling system using simulant materials. The need for additional testing was identified as a result of completing tests described in the revision test plan document, Revision 1 outlines tests that will evaluate the performance and ability to provide samples that are representative of a tanks' content within a 95 percent confidence interval, to recovery from plugging, to sample supernatant wastes with over 25 wt% solids content, and to evaluate the impact of sampling at different heights within the feed tank. The test plan also identifies operating parameters that will optimize the performance of the sampling system

Influence of Pre-question and genre-based instructional strategies on reading

Directory of Open Access Journals (Sweden)

Titi J. Fola-Adebayo

2014-12-01

Full Text Available This study investigated the influence of Pre-question and genre-based instructional strategies on science undergraduates’ achievement in, and attitude to, reading. Using purposive sampling,two specialised universities in Nigeria were selected and stratified sampling was employed in assigning students to research groups based on gender and performance in a verbal ability test. Two hundred and eighty-five students participated in the study. Pre-post randomised block experimental design was used with three experimental groups and one control group. The experimental procedure involving Pre-question, genre-based instruction and a combination of Pre-question and genre-based instructional strategies were used for the experimental groups for four weeks whilst the control group received normal teacher input. Data were collected through a Reading Comprehension Achievement Test and Students’ Attitude Questionnaire. Qualitative data, obtained from videotapes of classroom interactions, were subjected to conversation and interaction analyses and quantitative data were analysed with Analysis of Covariance (ANCOVA. The results indicate that although there was no significant main effect of instructional strategy on students’ achievement in reading comprehension, there was significant main effect of instructional strategy on students’ attitude to reading (F(3,231 = 30.9;p <.05. Findings from the qualitative enquiry revealed that female students were more voluble and assertive in their responses probably because of the need to resist male domination whilst male students used discourse strategies to affirm their authority. The study indicated that the combination of pre-question and genre-based approach was the most effective in enhancing the students’ attitude to reading. Reading is one of the most useful of the Language Arts skills which learners need for academic reasons and for lifelong learning. The globalised world demands that the second language

The Question Complexity Rubric: Development and Application for a National Archive of Astro 101 Multiple-Choice Questions

Science.gov (United States)

Cormier, Sebastien; Prather, E. E.; Brissenden, G.; Collaboration of Astronomy Teaching Scholars CATS

2011-01-01

For the last two years we have been developing an online national archive of multiple-choice questions for use in the Astro 101 classroom. These questions are intended to either supplement an instructor's implementation of Think-Pair-Share or be used for assessment purposes (i.e. exams and homework). In this talk we will describe the development, testing and implementation of the Question Complexity Rubric (QCR), which is designed to guide the ranking of questions in this archive based on their conceptual complexity. Using the QCR, a score is assigned to differentiate each question based on the cognitive steps necessary to comprehensively explain the reasoning pathway to the correct answer. The lowest QCR score is given to questions with a reasoning pathway requiring only declarative knowledge whereas the highest QCR score is given to questions that require multiple pathways of multi-step reasoning. When completed, the online question archive will provide users with the utility to 1) search for and download questions based on subject and average QCR score, 2) use the QCR to score questions, and 3) add their own questions to the archive. We will also discuss other potential applications of the QCR, such as how it informs our work in developing and testing of survey instruments by allowing us to calibrate the range of question complexity. This material is based upon work supported by the National Science Foundation under Grant No. 0715517, a CCLI Phase III Grant for the Collaboration of Astronomy Teaching Scholars (CATS). Any opinions, findings, and conclusions or recommendations expressed in this material are those of the authors and do not necessarily reflect the views of the National Science Foundation.

Guided Discovery with Socratic Questioning

Directory of Open Access Journals (Sweden)

M. Hakan Türkçapar

2015-04-01

Full Text Available “The Socratic method” is a way of teaching philosophical thinking and knowledge by asking questions. It was first used by in ancient times by the Greek philosopher Socrates who taught his followers by asking questions; these conversations between them are known as “Socratic dialogues”. In this methodology, no new knowledge is taught to the individual; rather, the individual is guided to remember and rediscover what was formerly known through this process. The main method used in cognitive therapy is guided discovery. There are various methods of guided discovery in cognitive therapy. The form of verbal exchange between the therapist and client which is used during the process of cognitive behavioral therapy is known as “socratic questioning”. In this method the goal is to make the client rediscover, with a series of questions, a piece of knowledge which he could otherwise know but is not presently conscious of. The Socratic Questioning consists of several steps, including: identifying the problem by listening to the client and making reflections, finding alternatives by examining and evaluating, reidentification by using the newly rediscovered information and questioning the old distorted belief, and reaching a new conclusion and applying it. Question types used during these procedures are: questions for collecting information, questions revealing meanings, questions revealing beliefs, questions about behaviours during similar past experiences, analytic questions and analytic synthesis questions. In order to make the patient feel understood, it is important to be empathetic and summarize the problem during the interview. In this text, steps of Socratic Questioning-Guided Discovery will be reviewed with sample dialogues provided for each step. [JCBPR 2015; 4(1.000: 47-53

On the Representativeness of Norming Samples for Aptitude Test

National Research Council Canada - National Science Library

Sims, William

2003-01-01

...). We regressed aptitude test scores on demographics and concluded that: ̂ Norming sample for aptitude tests must be representative of the target population with respect to age, race"ethnicity, gender, respondent's education, and mother's...

A novel PMT test system based on waveform sampling

Science.gov (United States)

Yin, S.; Ma, L.; Ning, Z.; Qian, S.; Wang, Y.; Jiang, X.; Wang, Z.; Yu, B.; Gao, F.; Zhu, Y.; Wang, Z.

2018-01-01

Comparing with the traditional test system based on a QDC and TDC and scaler, a test system based on waveform sampling is constructed for signal sampling of the 8"R5912 and the 20"R12860 Hamamatsu PMT in different energy states from single to multiple photoelectrons. In order to achieve high throughput and to reduce the dead time in data processing, the data acquisition software based on LabVIEW is developed and runs with a parallel mechanism. The analysis algorithm is realized in LabVIEW and the spectra of charge, amplitude, signal width and rising time are analyzed offline. The results from Charge-to-Digital Converter, Time-to-Digital Converter and waveform sampling are discussed in detailed comparison.

Testing audiovisual comprehension tasks with questions embedded in videos as subtitles: a pilot multimethod study

OpenAIRE

Casañ Núñez, Juan Carlos

2017-01-01

[EN] Listening, watching, reading and writing simultaneously in a foreign language is very complex. This paper is part of wider research which explores the use of audiovisual comprehension questions imprinted in the video image in the form of subtitles and synchronized with the relevant fragments for the purpose of language learning and testing. Compared to viewings where the comprehension activity is available only on paper, this innovative methodology may provide some benefits. Among them, ...

Internet delivered question and answer column for patients with schizophrenia.

Science.gov (United States)

Maijala, Riikka; Anttila, Minna; Koivunen, Marita; Pitkänen, Anneli; Kuosmanen, Lauri; Välimäki, Maritta

2015-01-01

The purpose of this study was to describe the use of an Internet delivered question and answer column among patients with schizophrenia. The column was developed for research purposes. The study sample consisted of patients (N = 100) admitted to acute inpatient psychiatric care in two hospital districts. Descriptive data were collected from the column to which a nurse replied within 3 days and analysed using qualitative content analysis. The column had four to five questions weekly. The most common age of users was 18-24 years, and the gender distribution was almost equal. Column use was heaviest among students (44%) and least among unemployed people (19%). Out of 85 questions or comments sent to the column, 25 (29%) were related to program training and the remaining 60 (71%) were related to medication (31%), illness and tests (25%), other questions or comments (9%), daily life and coping with it (4%), and places to receive treatment (2%). An Internet delivered question and answer column can be included in the care of patients with schizophrenia. However, it requires a new type of basic and additional education in the field of mental health care in order for nurses to be able to provide nursing via the Internet forum.

Commutability of food microbiology proficiency testing samples.

Science.gov (United States)

Abdelmassih, M; Polet, M; Goffaux, M-J; Planchon, V; Dierick, K; Mahillon, J

2014-03-01

Food microbiology proficiency testing (PT) is a useful tool to assess the analytical performances among laboratories. PT items should be close to routine samples to accurately evaluate the acceptability of the methods. However, most PT providers distribute exclusively artificial samples such as reference materials or irradiated foods. This raises the issue of the suitability of these samples because the equivalence-or 'commutability'-between results obtained on artificial vs. authentic food samples has not been demonstrated. In the clinical field, the use of noncommutable PT samples has led to erroneous evaluation of the performances when different analytical methods were used. This study aimed to provide a first assessment of the commutability of samples distributed in food microbiology PT. REQUASUD and IPH organized 13 food microbiology PTs including 10-28 participants. Three types of PT items were used: genuine food samples, sterile food samples and reference materials. The commutability of the artificial samples (reference material or sterile samples) was assessed by plotting the distribution of the results on natural and artificial PT samples. This comparison highlighted matrix-correlated issues when nonfood matrices, such as reference materials, were used. Artificially inoculated food samples, on the other hand, raised only isolated commutability issues. In the organization of a PT-scheme, authentic or artificially inoculated food samples are necessary to accurately evaluate the analytical performances. Reference materials, used as PT items because of their convenience, may present commutability issues leading to inaccurate penalizing conclusions for methods that would have provided accurate results on food samples. For the first time, the commutability of food microbiology PT samples was investigated. The nature of the samples provided by the organizer turned out to be an important factor because matrix effects can impact on the analytical results. © 2013

VQABQ: Visual Question Answering by Basic Questions

KAUST Repository

Huang, Jia-Hong

2017-03-19

Taking an image and question as the input of our method, it can output the text-based answer of the query question about the given image, so called Visual Question Answering (VQA). There are two main modules in our algorithm. Given a natural language question about an image, the first module takes the question as input and then outputs the basic questions of the main given question. The second module takes the main question, image and these basic questions as input and then outputs the text-based answer of the main question. We formulate the basic questions generation problem as a LASSO optimization problem, and also propose a criterion about how to exploit these basic questions to help answer main question. Our method is evaluated on the challenging VQA dataset and yields state-of-the-art accuracy, 60.34% in open-ended task.

VQABQ: Visual Question Answering by Basic Questions

KAUST Repository

Huang, Jia-Hong; Alfadly, Modar; Ghanem, Bernard

2017-01-01

Taking an image and question as the input of our method, it can output the text-based answer of the query question about the given image, so called Visual Question Answering (VQA). There are two main modules in our algorithm. Given a natural language question about an image, the first module takes the question as input and then outputs the basic questions of the main given question. The second module takes the main question, image and these basic questions as input and then outputs the text-based answer of the main question. We formulate the basic questions generation problem as a LASSO optimization problem, and also propose a criterion about how to exploit these basic questions to help answer main question. Our method is evaluated on the challenging VQA dataset and yields state-of-the-art accuracy, 60.34% in open-ended task.

Fostering Effective Studying and Study Planning with Study Questions

Science.gov (United States)

Wilhelm, Pascal; Pieters, Jules M.

2007-01-01

In a course on biological psychology and neuropsychology, study questions were provided that also appeared as test questions in the course exam. This method was introduced to support students in active processing and reproduction of the study texts, and study planning. Data were gathered to test the hypothesis that study question use would be…

Outsourcing cytological samples to a referral laboratory for EGFR testing in non-small cell lung cancer: does theory meet practice?

Science.gov (United States)

Vigliar, E; Malapelle, U; Bellevicine, C; de Luca, C; Troncone, G

2015-10-01

Guidelines from the College of American Pathologists (CAP), the International Association for the Study of Lung Cancer (IASLC) and the Association for Molecular Pathology (AMP) consider cytology suitable for testing epidermal growth factor receptor (EGFR) mutations in lung adenocarcinoma. The guidelines recommend that cytopathologists first discuss the possibility of testing squamous cell carcinomas (SqCC) in multidisciplinary meetings. Second, cell blocks should be analysed rather than smear preparations and, third, specimens should be sent to external molecular laboratories within three working days of receiving requests. This study monitored how these recommendations are met in practice. Our laboratory received 596 requests from cytologists from 13 different institutions. For each case, the cytological diagnosis, cytopreparation type, and time between the request and sample mailing were compared with the recommendations. Of the 596 samples, 32 (5.4%) had been reported as SqCC. Three of these (9.4%) showed EGFR mutation. Cytological slides, either ThinPrep(™) (51.2%) or direct smears (43.2%), were more frequently received than cell blocks (5.7%). The mean time between the oncologist's request and specimen dispatching was 5.8 working days. The occurrence of mutations in samples reported as SqCC was higher than expected. This questions the reliability of the original diagnosis, which reinforced the recommendation to evaluate the opportunity for testing non-adenocarcinoma cytology on a case-by-case basis. In spite of CAP/IASLC/AMP recommendations, cell blocks were underutilized for EGFR testing, but cytological slides were suitable for DNA analyses. Significant efforts are needed to avoid delays in outsourcing cytological samples for EGFR testing. © 2014 John Wiley & Sons Ltd.

Women’s experience with home-based self-sampling for human papillomavirus testing

International Nuclear Information System (INIS)

Sultana, Farhana; Mullins, Robyn; English, Dallas R.; Simpson, Julie A.; Drennan, Kelly T.; Heley, Stella; Wrede, C. David; Brotherton, Julia M. L.; Saville, Marion; Gertig, Dorota M.

2015-01-01

Increasing cervical screening coverage by reaching inadequately screened groups is essential for improving the effectiveness of cervical screening programs. Offering HPV self-sampling to women who are never or under-screened can improve screening participation, however participation varies widely between settings. Information on women’s experience with self-sampling and preferences for future self-sampling screening is essential for programs to optimize participation. The survey was conducted as part of a larger trial (“iPap”) investigating the effect of HPV self-sampling on participation of never and under-screened women in Victoria, Australia. Questionnaires were mailed to a) most women who participated in the self-sampling to document their experience with and preference for self-sampling in future, and b) a sample of the women who did not participate asking reasons for non-participation and suggestions for enabling participation. Reasons for not having a previous Pap test were also explored. About half the women who collected a self sample for the iPap trial returned the subsequent questionnaire (746/1521). Common reasons for not having cervical screening were that having Pap test performed by a doctor was embarrassing (18 %), not having the time (14 %), or that a Pap test was painful and uncomfortable (11 %). Most (94 %) found the home-based self-sampling less embarrassing, less uncomfortable (90 %) and more convenient (98 %) compared with their last Pap test experience (if they had one); however, many were unsure about the test accuracy (57 %). Women who self-sampled thought the instructions were clear (98 %), it was easy to use the swab (95 %), and were generally confident that they did the test correctly (81 %). Most preferred to take the self-sample at home in the future (88 %) because it was simple and did not require a doctor’s appointment. Few women (126/1946, 7 %) who did not return a self-sample in the iPap trial returned the questionnaire

Test plan for the Sample Transfer Canister system

International Nuclear Information System (INIS)

Flanagan, B.D.

1998-01-01

The Sample Transfer Canister will be used by the Waste Receiving and Processing Facility (WRAP) for the transport of small quantity liquid samples that meet the definition of a limited quantity radioactive material, and may also be corrosive and/or flammable. These samples will be packaged and shipped in accordance with the US Department of Transportation (DOT) regulation 49 CFR 173.4, ''Exceptions for small quantities.'' The Sample Transfer Canister is of a ''French Can'' design, intended to be mated with a glove box for loading/unloading. Transport will typically take place north of the Wye Barricade between WRAP and the 222-S Laboratory. The Sample Transfer Canister will be shipped in an insulated ice chest, but the ice chest will not be a part of the small quantity package during prototype testing

Test--retest variability of Randot stereoacuity measures gathered in an unselected sample of UK primary school children.

Science.gov (United States)

Adler, Paul; Scally, Andrew J; Barrett, Brendan T

2012-05-01

To determine the test-retest reliability of the Randot stereoacuity test when used as part of vision screening in schools. Randot stereoacuity (graded-circles) and logMAR visual acuity measures were gathered in an unselected sample of 139 children (aged 4-12, mean 8.1±2.1 years) in two schools. Randot testing was repeated on two occasions (average interval between successive tests 8 days, range: 1-21 days). Three Randot scores were obtained in 97.8% of children. Randot stereoacuity improved by an average of one plate (ie, one test level) on repeat testing but was little changed when tested on the third occasion. Within-subject variability was up to three test levels on repeat testing. When stereoacuity was categorised as 'fine', 'intermediate' or 'coarse', the greatest variability was found among younger children who exhibited 'intermediate' or 'coarse'/nil stereopsis on initial testing. Whereas 90.8% of children with 'fine' stereopsis (≤50 arc-seconds) on the first test exhibited 'fine' stereopsis on both subsequent tests, only ∼16% of children with 'intermediate' (>50 but ≤140 arc-seconds) or 'coarse'/nil (≥200 arc-seconds) stereoacuity on initial testing exhibited stable test results on repeat testing. Children exhibiting abnormal stereoacuity on initial testing are very likely to exhibit a normal result when retested. The value of a single, abnormal Randot graded-circles stereoacuity measure from school screening is therefore questionable.

Testing of serum atherogenicity in cell cultures: questionable data published

Directory of Open Access Journals (Sweden)

Sergei V. Jargin

2012-01-01

Full Text Available In a large series of studies was reported that culturing of smooth muscle cells with serum from atherosclerosis patients caused intracellular lipid accumulation, while serum from healthy controls had no such effect. Cultures were used for evaluation of antiatherogenic drugs. Numerous substances were reported to lower serum atherogenicity: statins, trapidil, calcium antagonists, garlic derivatives etc. On the contrary, beta-blockers, phenothiazines and oral hypoglycemics were reported to be pro-atherogenic. Known antiatherogenic agents can influence lipid metabolism and cholesterol synthesis, intestinal absorption or endothelium-related mechanisms. All these targets are absent in cell monocultures. Inflammatory factors, addressed by some antiatherogenic drugs, are also not reproduced. In vivo, relationship between cholesterol uptake by cells and atherogenesis must be inverse rather than direct: in familial hypercholesterolemia, inefficient clearance of LDL-cholesterol by cells predisposes to atherosclerosis. Accordingly, if a pharmacological agent reduces cholesterol uptake by cells in vitro, it should be expected to elevate cholesterol in vivo. Validity of clinical recommendations, based on serum atherogenicity testing in cell monocultures, is therefore questionable. These considerations pertain also to the drugs developed on the basis of the cell culture experiments.

Identification of Conflicting Questions in the PARES System

Directory of Open Access Journals (Sweden)

Avgoustos Tsinakos

2012-06-01

Full Text Available Student testing and knowledge assessment is a significant aspect of the learning process. In a number of cases, it is expedient not to present the exact same test to all learners all the time (Pritchett, 1999. This may be desired so that cheating in the exam is made harder to carry out or so that the learners can take several practice tests on the same subject as part of the course.This study presents an e-testing platform, namely PARES, which aims to provide assessment services to academic staff by facilitating the creation and management of question banks and powering the delivery of nondeterministically generated test suites. PARES uses a conflict detection algorithm based on the vector space model to compute the similarity between questions and exclude questions which are deemed to have an unacceptably large similarity from appearing in the same test suite. The conflict detection algorithm and a statistical evaluation of its accuracy are presented. Evaluation results show that PARES succeeds in detecting question types at about 90% and its efficiency can be further increased through continuing education and enrichment of the system’s correlation vocabulary.

A Technique Socratic Questioning-Guided Discovery

Directory of Open Access Journals (Sweden)

M. Hakan Türkçapar

2012-03-01

Full Text Available “Socratic Method” is a way of teaching philosophical thinking and knowledge by asking questions which was used by antique period greek philosopher Socrates. Socrates was teaching knowledge to his followers by asking questions and the conversation between them was named “Socratic Dialogues”. In this meaning, no novel knowledge is taught to the individual but only what is formerly known is reminded and rediscovered. The form of socratic questioning which is used during the process of cognitive behavioral therapy is known as Guided Discovery. In this method it is aimed to make the client notice the piece of knowledge which he could notice but is not aware with a series of questions. Socratic method or guided discovery consists of several steps which are: Identifying the problem by listening to the client and making reflections, finding alternatives by examining and evaluating, reidentification by using the newly found information and questioning the old distorted belief and reaching to a conclusion and applying it. Question types used during these procedures are, questions for gaining information, questions revealing the meanings, questions revealing the beliefs, questions about behaviours during the similar past experiences, analyse questions and analytic synthesis questions. In order to make the patient feel understood it is important to be empathetic and summarising the problem during the interview. In this text, steps of Socratic Questioning-Guided Discovery will be reviewed with sample dialogues after each step

The first DC performance test and analysis of CC conductor short sample at ASIPP conductor test facility

International Nuclear Information System (INIS)

Shi Yi; Wu Yu; Liu Huajun; Long Feng; Qian Li; Ren Zhibin; Li Shaolei; Liu Bo; Chen Jinglin

2012-01-01

Highlights: ► In this study the first DC performance experiments of ITER correction coil conductor short sample have been carried out in ASIPP test facility. ► A CC conductor short sample was fabricated and tested to confirm the capability of this test facility for qualification tests of CC conductors. ► There is no obvious impact of cycling on DC performance measurement. ► Those measured results of current sharing temperature are in agreement with the expected results from strand scaling - Abstract: The first DC performance experiments of ITER correction coil (CC) conductor short sample have been carried out in the conductor test facility of Institute of Plasma Physics, CAS (ASIPP) in January this year. Those experiments aim to investigate the DC performance of ITER CC conductor. The tested conductor short sample is bended as a half circle with the diameter of 270 mm to meet the background magnetic field shape. The half circle part of sample is longer than the final twist pitch. The current sharing temperature (T cs ) in the 3.86 T external magnetic field (B ex ), ≤12 kA could be measured including the critical current (I c ) run. There is no obvious impact of 1000 cycles on DC performance. Those measured T cs results are in agreement with the expected results from strand scaling.

Thousand Questions

DEFF Research Database (Denmark)

2012-01-01

(perhaps as an expanded Turing test) on its listeners. These questions are extracted in real-time from Twitter with the keyword search of the ‘?’ symbol to create a spatio-temporal experience. The computerized voice the audience hears is a collective one, an entanglement of humans and non-humans......In this work the network asks “If I wrote you a love letter would you write back?” Like the love letters which appeared mysteriously on the noticeboards of Manchester University’s Computer Department in the 1950s, thousands of texts circulate as computational processes perform the questions......, that circulates across networks. If I wrote you a love letter would you write back? (and thousands of other questions’ ) (封不回的情書？千言萬語無人回 was commissioned by the Microwave International New Media Festival 2012....

The Effect of Iranian EFL Learners’ Self-generated vs. Group-generated Text-based Questions on their Reading Comprehension

Directory of Open Access Journals (Sweden)

Shawnem Kadkhodaee

2015-05-01

Full Text Available Reading comprehension is one of the most important skills, especially in the EFL context. One way to improve reading comprehension is through strategy use. The present study aimed at investigating the effect of question-generation strategy on learners' reading comprehension. The participants in the study were 63 intermediate students from three intact groups in Resa institute in Boukan, They were randomly assigned to two experimental and one control groups. They were given two samples of the reading section of the standardized Preliminary English Test (PET as the pre- and post-tests. The students in the experimental group A generated text-based reading comprehension questions individually, and in the experimental group B  in groups of three but the learners in the control group answered the reading comprehension questions provided in the text. The results of ANOVA revealed that the students in the experimental group B, who employed group-question generation strategy, outperformed the experimental group A, who employed individual- question generation strategy and the control group in the reading comprehension post-test. The findings can have some implications for EFL teachers and syllabus designers.

Laboratory Tests of Bitumen Samples Elasticity

Science.gov (United States)

Ziganshin, E. R.; Usmanov, S. A.; Khasanov, D. I.; Khamidullina, G. S.

2018-05-01

This paper is devoted to the study of the elastic and acoustic properties of bitumen core samples. The travel velocities of the ultrasonic P- and S-waves were determined under in-situ simulation conditions. The resulting data were then used to calculate dynamic Young's modulus and Poisson's ratio. The authors studied the correlation between the elasticity and the permeability and porosity. In addition, the tests looked into how the acoustic properties had changed with temperature rise.

Questioning Questions: Elementary Teachers' Adaptations of Investigation Questions Across the Inquiry Continuum

Science.gov (United States)

Biggers, Mandy

2018-02-01

Questioning is a central practice in science classrooms. However, not every question translates into a "good" science investigation. Questions that drive science investigations can be provided by many sources including the teacher, the curriculum, or the student. The variations in the source of investigation questions were explored in this study. A dataset of 120 elementary science classroom videos and associated lesson plans from 40 elementary teachers (K-5) across 21 elementary school campuses were scored on an instrument measuring the amount of teacher-direction or student-direction of the lessons' investigation questions. Results indicated that the investigation questions were overwhelmingly teacher directed in nature, with no opportunities for students to develop their own questions for investigation. This study has implications for researchers and practitioners alike, calling attention to the teacher-directed nature of investigation questions in existing science curriculum materials, and the need for teacher training in instructional strategies to adapt their existing curriculum materials across the continuum of teacher-directed and student-directed investigation questions. Teachers need strategies for adapting the teacher-directed questions provided in their existing curriculum materials in order to allow students the opportunity to engage in this essential scientific practice.

Transfer of test samples and wastes between post-irradiation test facilities (FMF, AGF, MMF)

International Nuclear Information System (INIS)

Ishida, Yasukazu; Suzuki, Kazuhisa; Ebihara, Hikoe; Matsushima, Yasuyoshi; Kashiwabara, Hidechiyo

1975-02-01

Wide review is given on the problems associated with the transfer of test samples and wastes between post-irradiation test facilities, FMF (Fuel Monitoring Facility), AGF (Alpha Gamma Facility), and MMF (Material Monitoring Facility) at the Oarai Engineering Center, PNC. The test facilities are connected with the JOYO plant, an experimental fast reactor being constructed at Oarai. As introductory remarks, some special features of transferring irradiated materials are described. In the second part, problems on the management of nuclear materials and radio isotopes are described item by item. In the third part, the specific materials that are envisaged to be transported between JOYO and the test facilities are listed together with their geometrical shapes, dimensions, etc. In the fourth part, various routes and methods of transportation are explained with many block charts and figures. Brief explanation with lists and drawings is also given to transportation casks and vessels. Finally, some future problems are discussed, such as the prevention of diffusive contamination, ease of decontamination, and the identification of test samples. (Aoki, K.)

In-Pipe Wireless Communication for Underground Sampling and Testing

NARCIS (Netherlands)

Nguyen, Nhan D.T.; Le, Duc V.; Meratnia, Nirvana; Havinga, Paul J.M.

2017-01-01

In this paper, we present an effective and low- cost wireless communication system for extremely long and narrow pipes that can replay the extant wire system in underground sensor network applications such as soil sampling and testing with the Cone Penetration Test (CPT), the most widely used

Test plan for K Basin Sludge Canister and Floor Sampling Device

International Nuclear Information System (INIS)

Meling, T.A.

1995-01-01

This document provides the test plan and procedure forms for conducting the functional and operational acceptance testing of the K Basin Sludge Canister and Floor Sampling Device(s). These samplers samples sludge off the floor of the 100K Basins and out of 100K fuel storage canisters

TEXT CLASSIFICATION USING NAIVE BAYES UPDATEABLE ALGORITHM IN SBMPTN TEST QUESTIONS

Directory of Open Access Journals (Sweden)

Ristu Saptono

2017-01-01

Full Text Available Document classification is a growing interest in the research of text mining. Classification can be done based on the topics, languages, and so on. This study was conducted to determine how Naive Bayes Updateable performs in classifying the SBMPTN exam questions based on its theme. Increment model of one classification algorithm often used in text classification Naive Bayes classifier has the ability to learn from new data introduces with the system even after the classifier has been produced with the existing data. Naive Bayes Classifier classifies the exam questions based on the theme of the field of study by analyzing keywords that appear on the exam questions. One of feature selection method DF-Thresholding is implemented for improving the classification performance. Evaluation of the classification with Naive Bayes classifier algorithm produces 84,61% accuracy.

The Bootstrap, the Jackknife, and the Randomization Test: A Sampling Taxonomy.

Science.gov (United States)

Rodgers, J L

1999-10-01

A simple sampling taxonomy is defined that shows the differences between and relationships among the bootstrap, the jackknife, and the randomization test. Each method has as its goal the creation of an empirical sampling distribution that can be used to test statistical hypotheses, estimate standard errors, and/or create confidence intervals. Distinctions between the methods can be made based on the sampling approach (with replacement versus without replacement) and the sample size (replacing the whole original sample versus replacing a subset of the original sample). The taxonomy is useful for teaching the goals and purposes of resampling schemes. An extension of the taxonomy implies other possible resampling approaches that have not previously been considered. Univariate and multivariate examples are presented.

One picture or a thousand words? Influence of question length and illustration support on the success and skip rates on online tests

Directory of Open Access Journals (Sweden)

Ernest REDONDO

2017-02-01

Full Text Available The growing popularity of automatically graded online tests, either as an evaluation or self-assessment tool in online or blended education, demands a review of how these questions are designed and delivered to their intended audience. This paper analyzes the results of over 20,000 pre-university mock online quizzes designed to train the students for the Spanish university admission test (known as “Pruebas de Acceso a la Universidad” or “Selectividad” in the technical drawing subject, corresponding to the June and September intakes of 2009 and 2015. The influence of two key aspects on the questions success and skip rates is assessed: (a the presence or absence of illustration support and (b the length of the question as a proxy of reading comprehension difficulty. The results support that the presence of an accompanying illustration in the questions result in fewer skipped questions and mode successful answers, while the length of the question has the opposite effect. The performance difference in the 6-year span is also discussed, showing a slight decline over time in the pass rates while the skip rates remain stable. When comparing both two intakes, corresponding to different academic profiles of students that passed the June exam and those who did not, the success ratio is unsurprisingly lower for the students in the second intake. These findings should help improving the design of online quizzes, including more visual content and/or rephrasing the questions to be more concise, to fit the requirements of students educated in a more visual environment of multimedia technologies.

Gas liquid sampling for closed canisters in KW Basin - test plan

International Nuclear Information System (INIS)

Pitkoff, C.C.

1995-01-01

Test procedures for the gas/liquid sampler. Characterization of the Spent Nuclear Fuel, SNF, sealed in canisters at KW-Basin is needed to determine the state of storing SNF wet. Samples of the liquid and the gas in the closed canisters will be taken to gain characterization information. Sampling equipment has been designed to retrieve gas and liquid from the closed canisters in KW basin. This plan is written to outline the test requirements for this developmental sampling equipment

21 CFR 864.3260 - OTC test sample collection systems for drugs of abuse testing.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false OTC test sample collection systems for drugs of abuse testing. 864.3260 Section 864.3260 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Pathology...

Experimental Investigation Of Microbially Induced Corrosion Of Test Samples And Effect Of Self-assembled Hydrophobic Monolayers. Exposure Of Test Samples To Continuous Microbial Cultures, Chemical Analysis, And Biochemical Studies

CERN Document Server

Laurinavichius, K S

1998-01-01

Experimental Investigation Of Microbially Induced Corrosion Of Test Samples And Effect Of Self-assembled Hydrophobic Monolayers. Exposure Of Test Samples To Continuous Microbial Cultures, Chemical Analysis, And Biochemical Studies

Acceptability of self-collected vaginal samples for HPV testing in an ...

African Journals Online (AJOL)

Objective: To evaluate the acceptability of self-collected vaginal samples for HPV testing in women living in rural and urban areas of ... Conclusion: Acceptability of self-sampling for HPV testing was similarly excellent in both groups despite their difference in terms ... cancer is the leading cause of death caused by cancer in.

Fatigue testing on samples from Zircaloy-4 tubes type SEU-43

International Nuclear Information System (INIS)

Olaru, V.; Ionescu, V.; Nitu, A.; Ionescu, D.; Voicu, F.

2016-01-01

The paper presents the testing of samples worked from Zicaloy-4 tubes (as-received.. metallurgical state), utilized in the composition of the CANDU SEU-43 fuel bundle. These tests are intended to simulate their behaviour in a power cycling process inside the reactor. The testing process is of low cycle fatigue type, done outside of the reactor, on ''C-ring'' samples, cut along the transversal direction. These samples are tested at 1%, 2% and 3% amplitude deformation, at room temperature. The calibration curves for both types of tube (small and big diameter) are determined by using the finite element analyses with the ANSYS computer code. The cycling test results are in the form of a fatigue life curve (N-e) for zircaloy-4 used in the SEU-43 fuel bundle. The curve is determined by the experimental dependency between the number of cycles to fracture and the deformation amplitude. The low cycle fatigue mechanical tests done at room temperature together with electronic microscopy analyses have reflected the characteristic behaviour of the zircaloy-4 metal in the given environment conditions. (authors)

Solubility testing of actinides on breathing-zone and area air samples

International Nuclear Information System (INIS)

Metzger, R.L.; Jessop, B.H.; McDowell, B.L.

1996-02-01

A solubility testing method for several common actinides has been developed with sufficient sensitivity to allow profiles to be determined from routine breathing zone and area air samples in the workplace. Air samples are covered with a clean filter to form a filter-sample-filter sandwich which is immersed in an extracellular lung serum simulant solution. The sample is moved to a fresh beaker of the lung fluid simulant each day for one week, and then weekly until the end of the 28 day test period. The soak solutions are wet ashed with nitric acid and hydrogen peroxide to destroy the organic components of the lung simulant solution prior to extraction of the nuclides of interest directly into an extractive scintillator for subsequent counting on a Photon-Electron Rejecting Alpha Liquid Scintillation (PERALS reg-sign) spectrometer. Solvent extraction methods utilizing the extractive scintillators have been developed for the isotopes of uranium, plutonium, and curium. The procedures normally produce an isotopic recovery greater than 95% and have been used to develop solubility profiles from air samples with 40 pCi or less of U 3 O 8 . Profiles developed for U 3 O 8 samples show good agreement with in vitro and in vivo tests performed by other investigators on samples from the same uranium mills

Compressive and Flexural Tests on Adobe Samples Reinforced with Wire Mesh

Science.gov (United States)

Jokhio, G. A.; Al-Tawil, Y. M. Y.; Syed Mohsin, S. M.; Gul, Y.; Ramli, N. I.

2018-03-01

Adobe is an economical, naturally available, and environment friendly construction material that offers excellent thermal and sound insulations as well as indoor air quality. It is important to understand and enhance the mechanical properties of this material, where a high degree of variation is reported in the literature owing to lack of research and standardization in this field. The present paper focuses first on the understanding of mechanical behaviour of adobe subjected to compressive stresses as well as flexure and then on enhancing the same with the help of steel wire mesh as reinforcement. A total of 22 samples were tested out of which, 12 cube samples were tested for compressive strength, whereas 10 beams samples were tested for modulus of rupture. Half of the samples in each category were control samples i.e. without wire mesh reinforcement, whereas the remaining half were reinforced with a single layer of wire mesh per sample. It has been found that the compressive strength of adobe increases by about 43% after adding a single layer of wire mesh reinforcement. The flexural response of adobe has also shown improvement with the addition of wire mesh reinforcement.

Inert medium (helium) irradiation testing of pressure tube samples

International Nuclear Information System (INIS)

Ancuta, M.; Radu, V.; Stefan, V.; Preda, M.

2001-01-01

Irradiation tests currently performed in C-5 capsule aim at obtaining data and information concerning behavior to irradiation of pressure tubes of CANDU type fuel channel, to evidence the factors limiting operation life span. A calculation code for analysis and prediction of pressure tube behavior should be based upon periodical inspection results, post irradiation examination of the removed from reactor pressure tubes as well as on the experimental results obtained with materials subjected to irradiation conditions identical with the operational ones. Mechanical behavior analysis should focus both complex thermal-mechanical type stresses and mechanical properties alteration under irradiation. The experimental results should be applied: - to evaluate the irradiation effects upon mechanical properties of Zr-2.5% Nb exposed to fluences up to 10 21 n·cm -2 ; - to gather data concerning the real stress / real deformation characteristic from which characteristic quantities can be deduced as, for instance, elasticity modulus, plasticity modulus, exponent of stress term in the Tsu-Berteles relation, to be used within the CANTUP simulation code describing pressure tube behavior, currently developed at INR Pitesti; - to develop prediction methods of pressure tube behavior and merging with in-service inspection procedure in order to forecast the life span and the proper timing for replacement before major failures occur. The samples irradiated in C-5 capsule were extracted from the ends of Zr-2.5% Nb pressure tubes resulting from Cernavoda NPP Unit 1. The samples for tensile tests were extracted on longitudinal and transversal directions of the pressure tube. The tests were carried out under following conditions: - test environment temperature, 260 - 280 deg.C; - testing medium, helium at 1 - 6 b pressure; - neutron flux (E n > 1 MeV), 1 - 2 · 10 13 ncm -2 s -1 ; - neutron fluence (E n > 1 MeV), 4 · 10 20 ncm -2 . The following characteristics were obtained from tensile

Cooperative rhetoric question in contemporary Persian literature

Directory of Open Access Journals (Sweden)

Mostafa Dashti ahangar

2016-09-01

Finally some samples of cooperative rhetoric question in current literature will be presented. It should be noted that the goal of these samples is to be more familiar with the subject matter and not the analysis of current literal texts; because it needs more time and study.

Estimation of sample size and testing power (Part 4).

Science.gov (United States)

Hu, Liang-ping; Bao, Xiao-lei; Guan, Xue; Zhou, Shi-guo

2012-01-01

Sample size estimation is necessary for any experimental or survey research. An appropriate estimation of sample size based on known information and statistical knowledge is of great significance. This article introduces methods of sample size estimation of difference test for data with the design of one factor with two levels, including sample size estimation formulas and realization based on the formulas and the POWER procedure of SAS software for quantitative data and qualitative data with the design of one factor with two levels. In addition, this article presents examples for analysis, which will play a leading role for researchers to implement the repetition principle during the research design phase.

Fostering effective studying and study planning with study questions

NARCIS (Netherlands)

Wilhelm, P.; Pieters, J.M.

2007-01-01

In a course on biological psychology and neuropsychology, study questions were provided that also appeared as test questions in the course exam. This method was introduced to support students in active processing and reproduction of the study texts, and study planning. Data were gathered to test the

Microbiological analyses of samples from the H-Area injection well test site

International Nuclear Information System (INIS)

Wilde, E.W.; Franck, M.M.

1997-01-01

Microbial populations in well water from monitoring wells at the test site were one to three orders of magnitude higher than well water from the Cretaceous aquifer (used as dilution water for the tests) or from a control well adjacent to the test site facility. Coupons samples placed in monitoring and control wells demonstrated progressive adhesion by microbes to materials used in well construction. Samples of material scraped from test well components during abandonment of the test site project revealed the presence of a variety of attached microbes including iron bacteria. Although the injection wells at the actual remediation facility for the F- and H-Area seepage basins remediation project are expected to be subjected to somewhat different conditions (e.g. considerably lower iron concentrations) than was the case at the test site, the potential for microbiologically mediated clogging and fouling within the process should be considered. A sampling program that includes microbiological testing is highly recommended

Use of a single alcohol screening question to identify other drug use.

Science.gov (United States)

Smith, Peter C; Cheng, Debbie M; Allensworth-Davies, Donald; Winter, Michael R; Saitz, Richard

2014-06-01

People who consume unhealthy amounts of alcohol are more likely to use illicit drugs. We tested the ability of a screening test for unhealthy alcohol use to simultaneously detect drug use. Adult English speaking patients (n=286) were enrolled from a primary care waiting room. They were asked the screening question for unhealthy alcohol use "How many times in the past year have you had X or more drinks in a day?", where X is 5 for men and 4 for women, and a response of one or more is considered positive. A standard diagnostic interview was used to determine current (past year) drug use or a drug use disorder (abuse or dependence). Oral fluid testing was also used to detect recent use of common drugs of abuse. The single screening question for unhealthy alcohol use was 67.6% sensitive (95% confidence interval [CI], 50.2-82.0%) and 64.7% specific (95% CI, 58.4-70.6%) for the detection of a drug use disorder. It was similarly insensitive for drug use detected by oral fluid testing and/or self-report. Although a patient with a drug use disorder has twice the odds of screening positive for unhealthy alcohol use compared to one without a drug use disorder, suggesting patients who screen positive for alcohol should be asked about drug use, a single screening question for unhealthy alcohol use was not sensitive or specific for the detection of other drug use or drug use disorders in a sample of primary care patients. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Questioning Questions: Elementary Teachers' Adaptations of Investigation Questions across the Inquiry Continuum

Science.gov (United States)

Biggers, Mandy

2018-01-01

Questioning is a central practice in science classrooms. However, not every question translates into a "good" science investigation. Questions that drive science investigations can be provided by many sources including the teacher, the curriculum, or the student. The variations in the source of investigation questions were explored in…

Operability test report for core sample truck number one flammable gas modifications

International Nuclear Information System (INIS)

Akers, J.C.

1997-01-01

This report primarily consists of the original test procedure used for the Operability Testing of the flammable gas modifications to Core Sample Truck No. One. Included are exceptions, resolutions, comments, and test results. This report consists of the original, completed, test procedure used for the Operability Testing of the flammable gas modifications to the Push Mode Core Sample Truck No. 1. Prior to the Acceptance/Operability test the truck No. 1 operations procedure (TO-080-503) was revised to be more consistent with the other core sample truck procedures and to include operational steps/instructions for the SR weather cover pressurization system. A draft copy of the operations procedure was used to perform the Operability Test Procedure (OTP). A Document Acceptance Review Form is included with this report (last page) indicating the draft status of the operations procedure during the OTP. During the OTP 11 test exceptions were encountered. Of these exceptions four were determined to affect Acceptance Criteria as listed in the OTP, Section 4.7 ACCEPTANCE CRITERIA

Page sample size in web accessibility testing: how many pages is enough?

NARCIS (Netherlands)

Velleman, Eric Martin; van der Geest, Thea

2013-01-01

Various countries and organizations use a different sampling approach and sample size of web pages in accessibility conformance tests. We are conducting a systematic analysis to determine how many pages is enough for testing whether a website is compliant with standard accessibility guidelines. This

Different goodness of fit tests for Rayleigh distribution in ranked set sampling

Directory of Open Access Journals (Sweden)

Amer Al-Omari

2016-03-01

Full Text Available In this paper, different goodness of fit tests for the Rayleigh distribution are considered based on simple random sampling (SRS and ranked set sampling (RSS techniques. The performance of the suggested estimators is evaluated in terms of the power of the tests by using Monte Carlo simulation. It is found that the suggested RSS tests perform better than their counterparts  in SRS.

A Third Moment Adjusted Test Statistic for Small Sample Factor Analysis.

Science.gov (United States)

Lin, Johnny; Bentler, Peter M

2012-01-01

Goodness of fit testing in factor analysis is based on the assumption that the test statistic is asymptotically chi-square; but this property may not hold in small samples even when the factors and errors are normally distributed in the population. Robust methods such as Browne's asymptotically distribution-free method and Satorra Bentler's mean scaling statistic were developed under the presumption of non-normality in the factors and errors. This paper finds new application to the case where factors and errors are normally distributed in the population but the skewness of the obtained test statistic is still high due to sampling error in the observed indicators. An extension of Satorra Bentler's statistic is proposed that not only scales the mean but also adjusts the degrees of freedom based on the skewness of the obtained test statistic in order to improve its robustness under small samples. A simple simulation study shows that this third moment adjusted statistic asymptotically performs on par with previously proposed methods, and at a very small sample size offers superior Type I error rates under a properly specified model. Data from Mardia, Kent and Bibby's study of students tested for their ability in five content areas that were either open or closed book were used to illustrate the real-world performance of this statistic.

Research on test of product based on spatial sampling criteria and variable step sampling mechanism

Science.gov (United States)

Li, Ruihong; Han, Yueping

2014-09-01

This paper presents an effective approach for online testing the assembly structures inside products using multiple views technique and X-ray digital radiography system based on spatial sampling criteria and variable step sampling mechanism. Although there are some objects inside one product to be tested, there must be a maximal rotary step for an object within which the least structural size to be tested is predictable. In offline learning process, Rotating the object by the step and imaging it and so on until a complete cycle is completed, an image sequence is obtained that includes the full structural information for recognition. The maximal rotary step is restricted by the least structural size and the inherent resolution of the imaging system. During online inspection process, the program firstly finds the optimum solutions to all different target parts in the standard sequence, i.e., finds their exact angles in one cycle. Aiming at the issue of most sizes of other targets in product are larger than that of the least structure, the paper adopts variable step-size sampling mechanism to rotate the product specific angles with different steps according to different objects inside the product and match. Experimental results show that the variable step-size method can greatly save time compared with the traditional fixed-step inspection method while the recognition accuracy is guaranteed.

A closer look at the effect of preliminary goodness-of-fit testing for normality for the one-sample t-test.

Science.gov (United States)

Rochon, Justine; Kieser, Meinhard

2011-11-01

Student's one-sample t-test is a commonly used method when inference about the population mean is made. As advocated in textbooks and articles, the assumption of normality is often checked by a preliminary goodness-of-fit (GOF) test. In a paper recently published by Schucany and Ng it was shown that, for the uniform distribution, screening of samples by a pretest for normality leads to a more conservative conditional Type I error rate than application of the one-sample t-test without preliminary GOF test. In contrast, for the exponential distribution, the conditional level is even more elevated than the Type I error rate of the t-test without pretest. We examine the reasons behind these characteristics. In a simulation study, samples drawn from the exponential, lognormal, uniform, Student's t-distribution with 2 degrees of freedom (t(2) ) and the standard normal distribution that had passed normality screening, as well as the ingredients of the test statistics calculated from these samples, are investigated. For non-normal distributions, we found that preliminary testing for normality may change the distribution of means and standard deviations of the selected samples as well as the correlation between them (if the underlying distribution is non-symmetric), thus leading to altered distributions of the resulting test statistics. It is shown that for skewed distributions the excess in Type I error rate may be even more pronounced when testing one-sided hypotheses. ©2010 The British Psychological Society.

Rhetorical questions or rhetorical uses of questions?

Directory of Open Access Journals (Sweden)

Špago Džemal

2016-12-01

Full Text Available This paper aims to explore whether some rhetorical questions contain certain linguistic elements or forms which would differentiate them from answer-eliciting and action-eliciting questions, and thereby hint at their rhetorical nature even outside the context. Namely, despite the fact that the same questions can be rhetorical in one context, and answer-eliciting in another, some of them are more likely to be associated with rhetorical or non-rhetorical use. The analysis is based on extensive data (over 1200 examples of rhetorical questions taken from 30 plays by two British and two American writers, and the results are expected to give an insight into whether we can talk about rhetorical questions or just a rhetorical use of questions.

On the matched pairs sign test using bivariate ranked set sampling ...

African Journals Online (AJOL)

BVRSS) is introduced and investigated. We show that this test is asymptotically more efficient than its counterpart sign test based on a bivariate simple random sample (BVSRS). The asymptotic null distribution and the efficiency of the test are derived.

40 CFR 205.171-2 - Test exhaust system sample selection and preparation.

Science.gov (United States)

2010-07-01

... Systems § 205.171-2 Test exhaust system sample selection and preparation. (a)(1) Exhaust systems... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Test exhaust system sample selection and preparation. 205.171-2 Section 205.171-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...

Operability test report for rotary mode core sampling system number 3

International Nuclear Information System (INIS)

Corbett, J.E.

1996-01-01

This report documents the successful completion of operability testing for the Rotary Mode Core Sampling (RMCS) system number-sign 3. The Report includes the test procedure (WHC-SD-WM-OTP-174), exception resolutions, data sheets, and a test report summary

Characterization of electron microscopes with binary pseudo-random multilayer test samples

Science.gov (United States)

Yashchuk, Valeriy V.; Conley, Raymond; Anderson, Erik H.; Barber, Samuel K.; Bouet, Nathalie; McKinney, Wayne R.; Takacs, Peter Z.; Voronov, Dmitriy L.

2011-09-01

Verification of the reliability of metrology data from high quality X-ray optics requires that adequate methods for test and calibration of the instruments be developed. For such verification for optical surface profilometers in the spatial frequency domain, a modulation transfer function (MTF) calibration method based on binary pseudo-random (BPR) gratings and arrays has been suggested [1,2] and proven to be an effective calibration method for a number of interferometric microscopes, a phase shifting Fizeau interferometer, and a scatterometer [5]. Here we describe the details of development of binary pseudo-random multilayer (BPRML) test samples suitable for characterization of scanning (SEM) and transmission (TEM) electron microscopes. We discuss the results of TEM measurements with the BPRML test samples fabricated from a WiSi 2/Si multilayer coating with pseudo-randomly distributed layers. In particular, we demonstrate that significant information about the metrological reliability of the TEM measurements can be extracted even when the fundamental frequency of the BPRML sample is smaller than the Nyquist frequency of the measurements. The measurements demonstrate a number of problems related to the interpretation of the SEM and TEM data. Note that similar BPRML test samples can be used to characterize X-ray microscopes. Corresponding work with X-ray microscopes is in progress.

Characterization of electron microscopes with binary pseudo-random multilayer test samples

International Nuclear Information System (INIS)

Yashchuk, Valeriy V.; Conley, Raymond; Anderson, Erik H.; Barber, Samuel K.; Bouet, Nathalie; McKinney, Wayne R.; Takacs, Peter Z.; Voronov, Dmitriy L.

2011-01-01

Verification of the reliability of metrology data from high quality X-ray optics requires that adequate methods for test and calibration of the instruments be developed. For such verification for optical surface profilometers in the spatial frequency domain, a modulation transfer function (MTF) calibration method based on binary pseudo-random (BPR) gratings and arrays has been suggested and proven to be an effective calibration method for a number of interferometric microscopes, a phase shifting Fizeau interferometer, and a scatterometer [5]. Here we describe the details of development of binary pseudo-random multilayer (BPRML) test samples suitable for characterization of scanning (SEM) and transmission (TEM) electron microscopes. We discuss the results of TEM measurements with the BPRML test samples fabricated from a WiSi 2 /Si multilayer coating with pseudo-randomly distributed layers. In particular, we demonstrate that significant information about the metrological reliability of the TEM measurements can be extracted even when the fundamental frequency of the BPRML sample is smaller than the Nyquist frequency of the measurements. The measurements demonstrate a number of problems related to the interpretation of the SEM and TEM data. Note that similar BPRML test samples can be used to characterize X-ray microscopes. Corresponding work with X-ray microscopes is in progress.

9 CFR 147.8 - Procedures for preparing egg yolk samples for diagnostic tests.

Science.gov (United States)

2010-01-01

... samples for diagnostic tests. 147.8 Section 147.8 Animals and Animal Products ANIMAL AND PLANT HEALTH... IMPROVEMENT PLAN Blood Testing Procedures § 147.8 Procedures for preparing egg yolk samples for diagnostic... for diagnostic testing. (b) The authorized laboratory must identify each egg as to the breeding flock...

Depressive cognition: a test of depressive realism versus negativity using general knowledge questions.

Science.gov (United States)

Stone, E R; Dodrill, C L; Johnson, N

2001-11-01

This research is an examination of whether cognition in depressed individuals incorporates a realistic view of the world or a general tendency toward negativity. Participants provided two types of probability judgments of the likelihood that they correctly answered general knowledge questions: the probability that they correctly answered each of the individual questions and an aggregate judgment, after completing the questionnaire, of the percentage of all the questions they thought they had correctly answered. These tasks generally elicit overconfidence and accuracy in nondepressives. In accord with theories of both depressive realism and general negativity, in their item-by-item assessments of their answers to the individual questions, depressed participants demonstrated less overconfidence than nondepressed participants. In accord with the theory of general negativity but not with the theory of depressive realism, however, depressed participants demonstrated underconfidence in their aggregate judgments. The implications of these findings on theories of depressive cognition are discussed.

Sample test cases using the environmental computer code NECTAR

International Nuclear Information System (INIS)

Ponting, A.C.

1984-06-01

This note demonstrates a few of the many different ways in which the environmental computer code NECTAR may be used. Four sample test cases are presented and described to show how NECTAR input data are structured. Edited output is also presented to illustrate the format of the results. Two test cases demonstrate how NECTAR may be used to study radio-isotopes not explicitly included in the code. (U.K.)

Salmonella testing of pooled pre-enrichment broth cultures for screening multiple food samples.

Science.gov (United States)

Price, W R; Olsen, R A; Hunter, J E

1972-04-01

A method has been described for testing multiple food samples for Salmonella without loss in sensitivity. The method pools multiple pre-enrichment broth cultures into single enrichment broths. The subsequent stages of the Salmonella analysis are not altered. The method was found applicable to several dry food materials including nonfat dry milk, dried egg albumin, cocoa, cottonseed flour, wheat flour, and shredded coconut. As many as 25 pre-enrichment broth cultures were pooled without apparent loss in the sensitivity of Salmonella detection as compared to individual sample analysis. The procedure offers a simple, yet effective, way to increase sample capacity in the Salmonella testing of foods, particularly where a large proportion of samples ordinarily is negative. It also permits small portions of pre-enrichment broth cultures to be retained for subsequent individual analysis if positive tests are found. Salmonella testing of pooled pre-enrichment broths provides increased consumer protection for a given amount of analytical effort as compared to individual sample analysis.

Tank 241-AZ-101 Mixer Pump Test Vapor Sampling and Analysis Plan

International Nuclear Information System (INIS)

TEMPLETON, A.M.

2000-01-01

This sampling and analysis plan (SAP) identifies characterization objectives pertaining to sample collection, laboratory analytical evaluation, and reporting requirements for vapor samples obtained during the operation of mixer pumps in tank 241-AZ-101. The primary purpose of the mixer pump test (MPT) is to demonstrate that the two 300 horsepower mixer pumps installed in tank 241-AZ-101 can mobilize the settled sludge so that it can be retrieved for treatment and vitrification. Sampling will be performed in accordance with Tank 241-AZ-101 Mixer Pump Test Data Quality Objective (Banning 1999) and Data Quality Objectives for Regulatory Requirements for Hazardous and Radioactive Air Emissions Sampling and Analysis (Mulkey 1999). The sampling will verify if current air emission estimates used in the permit application are correct and provide information for future air permit applications

Robustness to non-normality of various tests for the one-sample location problem

Directory of Open Access Journals (Sweden)

Michelle K. McDougall

2004-01-01

Full Text Available This paper studies the effect of the normal distribution assumption on the power and size of the sign test, Wilcoxon's signed rank test and the t-test when used in one-sample location problems. Power functions for these tests under various skewness and kurtosis conditions are produced for several sample sizes from simulated data using the g-and-k distribution of MacGillivray and Cannon [5].

Executive function impairment in community elderly subjects with questionable dementia.

Science.gov (United States)

Lam, Linda C W; Lui, Victor W C; Chiu, Helen F K; Chan, Sandra S M; Tam, Cindy W C

2005-01-01

The neurocognitive profile of community-dwelling Chinese subjects with 'questionable' dementia was studied. One hundred and fifty-four ambulatory Chinese subjects were recruited from local social centers for the elderly. Each subject was examined using the Clinical Dementia Rating (CDR), the Cantonese version of the Mini-Mental State Examination (CMMSE), the Chinese version of the Alzheimer's Disease Assessment Scale-Cognitive Subscale (ADAS-Cog), the Category Verbal Fluency Test (CVFT), digit and visual span tests, and the Cambridge Neurological Inventory. The neurocognitive profile of nondemented subjects (CDR 0) was compared with that of subjects with 'questionable' dementia (CDR 0.5). Subjects with 'questionable' dementia were older, and had lower educational levels and global cognitive assessment scores than the controls (CMMSE and ADAS-Cog; t tests, p < 0.001). In addition, they also had significantly lower scores in delayed recall, reverse span, verbal fluency tests and worse performance in complex motor tasks related to executive function (Mann-Whitney tests, p < 0.001). Logistic regression analysis revealed that ADAS-Cog, CVFT, and reverse visual span were significant predictors for the CDR of 'questionable' dementia. Aside from memory impairment, executive function deficits were also present in subjects with 'questionable' dementia. To identify groups cognitively at risk for dementia, concomitant assessments of memory and executive function are suggested.

Harmonisation of microbial sampling and testing methods for distillate fuels

Energy Technology Data Exchange (ETDEWEB)

Hill, G.C.; Hill, E.C. [ECHA Microbiology Ltd., Cardiff (United Kingdom)

1995-05-01

Increased incidence of microbial infection in distillate fuels has led to a demand for organisations such as the Institute of Petroleum to propose standards for microbiological quality, based on numbers of viable microbial colony forming units. Variations in quality requirements, and in the spoilage significance of contaminating microbes plus a tendency for temporal and spatial changes in the distribution of microbes, makes such standards difficult to implement. The problem is compounded by a diversity in the procedures employed for sampling and testing for microbial contamination and in the interpretation of the data obtained. The following paper reviews these problems and describes the efforts of The Institute of Petroleum Microbiology Fuels Group to address these issues and in particular to bring about harmonisation of sampling and testing methods. The benefits and drawbacks of available test methods, both laboratory based and on-site, are discussed.

Biology Question Generation from a Semantic Network

Science.gov (United States)

Zhang, Lishan

Science instructors need questions for use in exams, homework assignments, class discussions, reviews, and other instructional activities. Textbooks never have enough questions, so instructors must find them from other sources or generate their own questions. In order to supply instructors with biology questions, a semantic network approach was developed for generating open response biology questions. The generated questions were compared to professional authorized questions. To boost students' learning experience, adaptive selection was built on the generated questions. Bayesian Knowledge Tracing was used as embedded assessment of the student's current competence so that a suitable question could be selected based on the student's previous performance. A between-subjects experiment with 42 participants was performed, where half of the participants studied with adaptive selected questions and the rest studied with mal-adaptive order of questions. Both groups significantly improved their test scores, and the participants in adaptive group registered larger learning gains than participants in the control group. To explore the possibility of generating rich instructional feedback for machine-generated questions, a question-paragraph mapping task was identified. Given a set of questions and a list of paragraphs for a textbook, the goal of the task was to map the related paragraphs to each question. An algorithm was developed whose performance was comparable to human annotators. A multiple-choice question with high quality distractors (incorrect answers) can be pedagogically valuable as well as being much easier to grade than open-response questions. Thus, an algorithm was developed to generate good distractors for multiple-choice questions. The machine-generated multiple-choice questions were compared to human-generated questions in terms of three measures: question difficulty, question discrimination and distractor usefulness. By recruiting 200 participants from

Comparison of the Abbott RealTime High Risk HPV test and the Roche cobas 4800 HPV test using urine samples.

Science.gov (United States)

Lim, Myong Cheol; Lee, Do-Hoon; Hwang, Sang-Hyun; Hwang, Na Rae; Lee, Bomyee; Shin, Hye Young; Jun, Jae Kwan; Yoo, Chong Woo; Lee, Dong Ock; Seo, Sang-Soo; Park, Sang-Yoon; Joo, Jungnam

2017-05-01

Human papillomavirus (HPV) testing based on cervical samples is important for use in cervical cancer screening. However, cervical sampling is invasive. Therefore, non-invasive methods for detecting HPV, such as urine samples, are needed. For HPV detection in urine samples, two real-time PCR (RQ-PCR) tests, Roche cobas 4800 test (Roche_HPV; Roche Molecular Diagnostics) and Abbott RealTime High Risk HPV test (Abbott_HPV; Abbott Laboratories) were compared to standard cervical samples. The performance of Roche_HPV and Abbott_HPV for HPV detection was evaluated at the National Cancer Center using 100 paired cervical and urine samples. The tests were also compared using urine samples stored at various temperatures and for a range of durations. The overall agreement between the Roche_HPV and Abbott_HPV tests using urine samples for any hrHPV type was substantial (86.0% with a kappa value of 0.7173), and that for HPV 16/18 was nearly perfect (99.0% with a kappa value of 0.9668). The relative sensitivities (based on cervical samples) for HPV 16/18 detection using Roche_HPV and Abbott_HPV with urine samples were 79.2% (95% CI; 57.9-92.9%) and 81.8% (95% CI; 59.7-94.8%), respectively. When the cut-off C T value for Abbott_HPV was extended to 40 for urine samples, the relative sensitivity of Abbott_HPV increased to 91.7% from 81.8% for HPV16/18 detection and to 87.0% from 68.5% for other hrHPV detection. The specificity was not affected by the change in the C T threshold. Roche_HPV and Abbott_HPV showed high concordance. However, HPV DNA detection using urine samples was inferior to HPV DNA detection using cervical samples. Interestingly, when the cut-off C T value was set to 40, Abbott_HPV using urine samples showed high sensitivity and specificity, comparable to those obtained using cervical samples. Fully automated DNA extraction and detection systems, such as Roche_HPV and Abbott_HPV, could reduce the variability in HPV detection and accelerate the standardization of HPV

Characterization of electron microscopes with binary pseudo-random multilayer test samples

International Nuclear Information System (INIS)

Yashchuk, Valeriy V.; Conley, Raymond; Anderson, Erik H.; Barber, Samuel K.; Bouet, Nathalie; McKinney, Wayne R.; Takacs, Peter Z.; Voronov, Dmitriy L.

2010-01-01

We discuss the results of SEM and TEM measurements with the BPRML test samples fabricated from a BPRML (WSi2/Si with fundamental layer thickness of 3 nm) with a Dual Beam FIB (focused ion beam)/SEM technique. In particular, we demonstrate that significant information about the metrological reliability of the TEM measurements can be extracted even when the fundamental frequency of the BPRML sample is smaller than the Nyquist frequency of the measurements. The measurements demonstrate a number of problems related to the interpretation of the SEM and TEM data. Note that similar BPRML test samples can be used to characterize x-ray microscopes. Corresponding work with x-ray microscopes is in progress.

Filtration and Leach Testing for REDOX Sludge and S-Saltcake Actual Waste Sample Composites

Energy Technology Data Exchange (ETDEWEB)

Shimskey, Rick W.; Billing, Justin M.; Buck, Edgar C.; Daniel, Richard C.; Draper, Kathryn E.; Edwards, Matthew K.; Geeting, John GH; Hallen, Richard T.; Jenson, Evan D.; Kozelisky, Anne E.; MacFarlan, Paul J.; Peterson, Reid A.; Snow, Lanee A.; Swoboda, Robert G.

2009-02-20

A testing program evaluating actual tank waste was developed in response to Task 4 from the M-12 External Flowsheet Review Team (EFRT) issue response plan.( ) The test program was subdivided into logical increments. The bulk water-insoluble solid wastes that are anticipated to be delivered to the Waste Treatment and Immobilization Plant (WTP) were identified according to type such that the actual waste testing could be targeted to the relevant categories. Under test plan TP-RPP-WTP-467, eight broad waste groupings were defined. Samples available from the 222S archive were identified and obtained for testing. Under this test plan, a waste-testing program was implemented that included: • Homogenizing the archive samples by group as defined in the test plan • Characterizing the homogenized sample groups • Performing parametric leaching testing on each group for compounds of interest • Performing bench-top filtration/leaching tests in the hot cell for each group to simulate filtration and leaching activities if they occurred in the UFP2 vessel of the WTP Pretreatment Facility. This report focuses on filtration/leaching tests performed on two of the eight waste composite samples and follow-on parametric tests to support aluminum leaching results from those tests.

Post-Decontamination Vapor Sampling and Analytical Test Methods

Science.gov (United States)

2015-08-12

is decontaminated that could pose an exposure hazard to unprotected personnel. The chemical contaminants may include chemical warfare agents (CWAs... decontamination process. Chemical contaminants can include chemical warfare agents (CWAs) or their simulants, nontraditional agents (NTAs), toxic industrial...a range of test articles from coupons, panels, and small fielded equipment items. 15. SUBJECT TERMS Vapor hazard; vapor sampling; chemical warfare

A content validated questionnaire for assessment of self reported venous blood sampling practices.

Science.gov (United States)

Bölenius, Karin; Brulin, Christine; Grankvist, Kjell; Lindkvist, Marie; Söderberg, Johan

2012-01-19

Venous blood sampling is a common procedure in health care. It is strictly regulated by national and international guidelines. Deviations from guidelines due to human mistakes can cause patient harm. Validated questionnaires for health care personnel can be used to assess preventable "near misses"--i.e. potential errors and nonconformities during venous blood sampling practices that could transform into adverse events. However, no validated questionnaire that assesses nonconformities in venous blood sampling has previously been presented. The aim was to test a recently developed questionnaire in self reported venous blood sampling practices for validity and reliability. We developed a questionnaire to assess deviations from best practices during venous blood sampling. The questionnaire contained questions about patient identification, test request management, test tube labeling, test tube handling, information search procedures and frequencies of error reporting. For content validity, the questionnaire was confirmed by experts on questionnaires and venous blood sampling. For reliability, test-retest statistics were used on the questionnaire answered twice. The final venous blood sampling questionnaire included 19 questions out of which 9 had in total 34 underlying items. It was found to have content validity. The test-retest analysis demonstrated that the items were generally stable. In total, 82% of the items fulfilled the reliability acceptance criteria. The questionnaire could be used for assessment of "near miss" practices that could jeopardize patient safety and gives several benefits instead of assessing rare adverse events only. The higher frequencies of "near miss" practices allows for quantitative analysis of the effect of corrective interventions and to benchmark preanalytical quality not only at the laboratory/hospital level but also at the health care unit/hospital ward.

Design of sample analysis device for iodine adsorption efficiency test in NPPs

International Nuclear Information System (INIS)

Ji Jinnan

2015-01-01

In nuclear power plants, iodine adsorption efficiency test is used to check the iodine adsorption efficiency of the iodine adsorber. The iodine adsorption efficiency can be calculated through the analysis of the test sample, and thus to determine if the performance of the adsorber meets the requirement on the equipment operation and emission. Considering the process of test and actual demand, in this paper, a special device for the analysis of this kind of test sample is designed. The application shows that the device is with convenient operation and high reliability and accurate calculation, and improves the experiment efficiency and reduces the experiment risk. (author)

Respondent-Driven Sampling – Testing Assumptions: Sampling with Replacement

Directory of Open Access Journals (Sweden)

Barash Vladimir D.

2016-03-01

Full Text Available Classical Respondent-Driven Sampling (RDS estimators are based on a Markov Process model in which sampling occurs with replacement. Given that respondents generally cannot be interviewed more than once, this assumption is counterfactual. We join recent work by Gile and Handcock in exploring the implications of the sampling-with-replacement assumption for bias of RDS estimators. We differ from previous studies in examining a wider range of sampling fractions and in using not only simulations but also formal proofs. One key finding is that RDS estimates are surprisingly stable even in the presence of substantial sampling fractions. Our analyses show that the sampling-with-replacement assumption is a minor contributor to bias for sampling fractions under 40%, and bias is negligible for the 20% or smaller sampling fractions typical of field applications of RDS.

tscvh R Package: Computational of the two samples test on microarray-sequencing data

Science.gov (United States)

Fajriyah, Rohmatul; Rosadi, Dedi

2017-12-01

We present a new R package, a tscvh (two samples cross-variance homogeneity), as we called it. This package is a software of the cross-variance statistical test which has been proposed and introduced by Fajriyah ([3] and [4]), based on the cross-variance concept. The test can be used as an alternative test for the significance difference between two means when sample size is small, the situation which is usually appeared in the bioinformatics research. Based on its statistical distribution, the p-value can be also provided. The package is built under a homogeneity of variance between samples.

Characterization of a low-level radioactive waste grout: Sampling and test results

International Nuclear Information System (INIS)

Martin, P.F.C.; Lokken, R.O.

1992-12-01

WHC manages and operates the grout treatment facility at Hanford as part of a DOE program to clean up wastes stored at federal nuclear production sites. PNL provides support to the grout disposal program through pilot-scale tests, performance assessments, and formulation verification activities. in 1988 and 1989, over one million gallons of a low-level radioactive liquid waste was processed through the facility to produce a grout waste that was then deposited in an underground vault. The liquid waste was phosphate/sulfate waste (PSW) generated in decontamination of the N Reactor. PNL sampled and tested the grout produced during the second half of the PSW campaign to support quality verification activities prior to grout vault closure. Samples of grout were obtained by inserting nested-tube samplers into the grout slurry in the vault. After the grout had cured, the inner tube of the sampler was removed and the grout samples extracted. Tests for compressive strength, sonic velocity, and leach testing were used to assess grout quality; results were compared to those from pilot-scale test grouts made with a simulated PSW. The grout produced during the second half of the PSW campaign exceeded compressive strength and leachability formulation criteria. The nested tube samplers were effective in collecting samples of grout although their use introduced greater variability into the compressive strength data

Drilling induced damage of core samples. Evidences from laboratory testing and numerical modelling

International Nuclear Information System (INIS)

Lanaro, Flavio

2008-01-01

Extensive sample testing in uniaxial and Brazilian test conditions were carried out for the Shobasama and MIU Research Laboratory Site (Gifu Pref., Japan). The compressive and tensile strength of the samples was observed to be negatively correlated to the in-situ stress components. Such correlation was interpreted as stress-release induced sample damage. Similar stress conditions were then numerically simulated by means of the BEM-DDM code FRACOD 2D in plane strain conditions. This method allows for explicitly consider the influence of newly initiated or propagating fractures on the stress field and deformation of the core during drilling process. The models show that already at moderate stress levels some fracturing of the core during drilling might occur leading to reduced laboratory strength of the samples. Sample damage maps were produced independently from the laboratory test results and from the numerical models and show good agreement with each other. (author)

Testing of Alignment Parameters for Ancient Samples: Evaluating and Optimizing Mapping Parameters for Ancient Samples Using the TAPAS Tool

Directory of Open Access Journals (Sweden)

Ulrike H. Taron

2018-03-01

Full Text Available High-throughput sequence data retrieved from ancient or other degraded samples has led to unprecedented insights into the evolutionary history of many species, but the analysis of such sequences also poses specific computational challenges. The most commonly used approach involves mapping sequence reads to a reference genome. However, this process becomes increasingly challenging with an elevated genetic distance between target and reference or with the presence of contaminant sequences with high sequence similarity to the target species. The evaluation and testing of mapping efficiency and stringency are thus paramount for the reliable identification and analysis of ancient sequences. In this paper, we present ‘TAPAS’, (Testing of Alignment Parameters for Ancient Samples, a computational tool that enables the systematic testing of mapping tools for ancient data by simulating sequence data reflecting the properties of an ancient dataset and performing test runs using the mapping software and parameter settings of interest. We showcase TAPAS by using it to assess and improve mapping strategy for a degraded sample from a banded linsang (Prionodon linsang, for which no closely related reference is currently available. This enables a 1.8-fold increase of the number of mapped reads without sacrificing mapping specificity. The increase of mapped reads effectively reduces the need for additional sequencing, thus making more economical use of time, resources, and sample material.

Estimation of AUC or Partial AUC under Test-Result-Dependent Sampling.

Science.gov (United States)

Wang, Xiaofei; Ma, Junling; George, Stephen; Zhou, Haibo

2012-01-01

The area under the ROC curve (AUC) and partial area under the ROC curve (pAUC) are summary measures used to assess the accuracy of a biomarker in discriminating true disease status. The standard sampling approach used in biomarker validation studies is often inefficient and costly, especially when ascertaining the true disease status is costly and invasive. To improve efficiency and reduce the cost of biomarker validation studies, we consider a test-result-dependent sampling (TDS) scheme, in which subject selection for determining the disease state is dependent on the result of a biomarker assay. We first estimate the test-result distribution using data arising from the TDS design. With the estimated empirical test-result distribution, we propose consistent nonparametric estimators for AUC and pAUC and establish the asymptotic properties of the proposed estimators. Simulation studies show that the proposed estimators have good finite sample properties and that the TDS design yields more efficient AUC and pAUC estimates than a simple random sampling (SRS) design. A data example based on an ongoing cancer clinical trial is provided to illustrate the TDS design and the proposed estimators. This work can find broad applications in design and analysis of biomarker validation studies.

The impact of screening-test negative samples not enumerated by MPN

DEFF Research Database (Denmark)

Corbellini, Luis Gustavo; Ribeiro Duarte, Ana Sofia; de Knegt, Leonardo

2015-01-01

that includes false negative results from the screening, and a third that considers the entire data set. The relative sensitivity of the screening test was also calculated assuming as gold standard samples with confirmed Salmonella. Salmonella was confirmed by a reference laboratory in 29 samples either...

First Total Reflection X-Ray Fluorescence round-robin test of water samples: Preliminary results

Energy Technology Data Exchange (ETDEWEB)

Borgese, Laura; Bilo, Fabjola [Chemistry for Technologies Laboratory, University of Brescia, Brescia (Italy); Tsuji, Kouichi [Graduate School of Engineering, Osaka City University, Osaka (Japan); Fernández-Ruiz, Ramón [Servicio Interdepartamental de Investigación (SIdI), Laboratorio de TXRF, Universidad Autónoma de Madrid, Madrid (Spain); Margui, Eva [Department of Chemistry, University of Girona, Girona (Spain); Streli, Christina [TU Wien, Atominstitut,Radiation Physics, Vienna (Austria); Pepponi, Giancarlo [Fondazione Bruno Kessler, Povo, Trento (Italy); Stosnach, Hagen [Bruker Nano GmbH, Berlin (Germany); Yamada, Takashi [Rigaku Corporation, Takatsuki, Osaka (Japan); Vandenabeele, Peter [Department of Archaeology, Ghent University, Ghent (Belgium); Maina, David M.; Gatari, Michael [Institute of Nuclear Science and Technology, University of Nairobi, Nairobi (Kenya); Shepherd, Keith D.; Towett, Erick K. [World Agroforestry Centre (ICRAF), Nairobi (Kenya); Bennun, Leonardo [Laboratorio de Física Aplicada, Departamento de Física, Universidad de Concepción (Chile); Custo, Graciela; Vasquez, Cristina [Gerencia Química, Laboratorio B025, Centro Atómico Constituyentes, San Martín (Argentina); Depero, Laura E., E-mail: laura.depero@unibs.it [Chemistry for Technologies Laboratory, University of Brescia, Brescia (Italy)

2014-11-01

Total Reflection X-Ray Fluorescence (TXRF) is a mature technique to evaluate quantitatively the elemental composition of liquid samples deposited on clean and well polished reflectors. In this paper the results of the first worldwide TXRF round-robin test of water samples, involving 18 laboratories in 10 countries are presented and discussed. The test was performed within the framework of the VAMAS project, interlaboratory comparison of TXRF spectroscopy for environmental analysis, whose aim is to develop guidelines and a standard methodology for biological and environmental analysis by means of the TXRF analytical technique. - Highlights: • The discussion of the first worldwide TXRF round-robin test of water samples (18 laboratories of 10 countries) is reported. • Drinking, waste, and desalinated water samples were tested. • Data dispersion sources were identified: sample concentration, preparation, fitting procedure, and quantification. • The protocol for TXRF analysis of drinking water is proposed.

Questions and Questioning Techniques: A View of Indonesian Students’ Preferences

Directory of Open Access Journals (Sweden)

Debora Tri Ragawanti

2009-01-01

Full Text Available This study investigated students’ preference on teacher’s questions and questionings techniques and more importantly on how they could facilitate or impede their learning. The results on teacher’s questioning techniques showed that random nomination was more preferred than pre-arranged format nomination. In addition, techniques of nominating volunteering students and of giving wait-time were disliked by most student-respondents. As for types of question, the yes/no question was favored by most of the respondents. Different from the yes/no question, the number of respondents leaning forward to the analysis question, questions about fact of life, and questions to state opinion did not show a significant difference from the number of those leaning against the same questions.

Testing of a Microfluidic Sampling System for High Temperature Electrochemical MC&A

Energy Technology Data Exchange (ETDEWEB)

Pereira, Candido [Argonne National Lab. (ANL), Argonne, IL (United States); Nichols, Kevin [Argonne National Lab. (ANL), Argonne, IL (United States)

2013-11-27

This report describes the preliminary validation of a high-temperature microfluidic chip system for sampling of electrochemical process salt. Electroanalytical and spectroscopic techniques are attractive candidates for improvement through high-throughput sample analysis via miniaturization. Further, microfluidic chip systems are amenable to micro-scale chemical processing such as rapid, automated sample purification to improve sensor performance. The microfluidic chip was tested to determine the feasibility of the system for high temperature applications and conditions under which microfluidic systems can be used to generate salt droplets at process temperature to support development of material balance and control systems in a used fuel treatment facility. In FY13, the project focused on testing a quartz microchip device with molten salts at near process temperatures. The equipment was installed in glove box and tested up to 400°C using commercial thermal transfer fluids as the carrier phase. Preliminary tests were carried out with a low-melting halide salt to initially characterize the properties of this novel liquid-liquid system and to investigate the operating regimes for inducing droplet flow within candidate carrier fluids. Initial results show that the concept is viable for high temperature sampling but further development is required to optimize the system to operate with process relevant molten salts.

Evaluation of sampling methods for toxicological testing of indoor air particulate matter.

Science.gov (United States)

Tirkkonen, Jenni; Täubel, Martin; Hirvonen, Maija-Riitta; Leppänen, Hanna; Lindsley, William G; Chen, Bean T; Hyvärinen, Anne; Huttunen, Kati

2016-09-01

There is a need for toxicity tests capable of recognizing indoor environments with compromised air quality, especially in the context of moisture damage. One of the key issues is sampling, which should both provide meaningful material for analyses and fulfill requirements imposed by practitioners using toxicity tests for health risk assessment. We aimed to evaluate different existing methods of sampling indoor particulate matter (PM) to develop a suitable sampling strategy for a toxicological assay. During three sampling campaigns in moisture-damaged and non-damaged school buildings, we evaluated one passive and three active sampling methods: the Settled Dust Box (SDB), the Button Aerosol Sampler, the Harvard Impactor and the National Institute for Occupational Safety and Health (NIOSH) Bioaerosol Cyclone Sampler. Mouse RAW264.7 macrophages were exposed to particle suspensions and cell metabolic activity (CMA), production of nitric oxide (NO) and tumor necrosis factor (TNFα) were determined after 24 h of exposure. The repeatability of the toxicological analyses was very good for all tested sampler types. Variability within the schools was found to be high especially between different classrooms in the moisture-damaged school. Passively collected settled dust and PM collected actively with the NIOSH Sampler (Stage 1) caused a clear response in exposed cells. The results suggested the higher relative immunotoxicological activity of dust from the moisture-damaged school. The NIOSH Sampler is a promising candidate for the collection of size-fractionated PM to be used in toxicity testing. The applicability of such sampling strategy in grading moisture damage severity in buildings needs to be developed further in a larger cohort of buildings.

Trick questions: cosmopolitan hospitality

Directory of Open Access Journals (Sweden)

Eleanor Byrne

2013-08-01

Full Text Available Byrne’s paper consists of two parallel texts. The first explores the limits of cosmopolitanism in practice, taking as its subject the Life in the UK Citizenship Test, inaugurated under the Labour Government in 2005. It argues that the test exemplifies the predicament of all attempts at cosmopolitan hospitality as unconditional welcoming, through a discussion of the relation between questioning and welcoming the stranger. Establishing the relationship between cosmopolitanism and hospitality as envisaged in Derrida’s reading of Kant it asks what kind of cosmopolitan hospitality is either possible or desirable by exploring what Derrida calls the ‘perversions’ inherent in the structures of hospitality. It focuses on the concept of the ‘trick questions’ that the state asks the foreigner observed by Derrida in his reading of The Apology of Socrates; questions that seem to invite answers but foreclose the possibilities of a free response. The second text asks how this logic that Derrida identifies can be pushed or coaxed into new ways of addressing the perceived threats of ‘unconditional’ hospitality through a reading of ‘unconditional hospitality’ as queer in the work of Tove Jansson.

A content validated questionnaire for assessment of self reported venous blood sampling practices

Directory of Open Access Journals (Sweden)

Bölenius Karin

2012-01-01

Full Text Available Abstract Background Venous blood sampling is a common procedure in health care. It is strictly regulated by national and international guidelines. Deviations from guidelines due to human mistakes can cause patient harm. Validated questionnaires for health care personnel can be used to assess preventable "near misses"--i.e. potential errors and nonconformities during venous blood sampling practices that could transform into adverse events. However, no validated questionnaire that assesses nonconformities in venous blood sampling has previously been presented. The aim was to test a recently developed questionnaire in self reported venous blood sampling practices for validity and reliability. Findings We developed a questionnaire to assess deviations from best practices during venous blood sampling. The questionnaire contained questions about patient identification, test request management, test tube labeling, test tube handling, information search procedures and frequencies of error reporting. For content validity, the questionnaire was confirmed by experts on questionnaires and venous blood sampling. For reliability, test-retest statistics were used on the questionnaire answered twice. The final venous blood sampling questionnaire included 19 questions out of which 9 had in total 34 underlying items. It was found to have content validity. The test-retest analysis demonstrated that the items were generally stable. In total, 82% of the items fulfilled the reliability acceptance criteria. Conclusions The questionnaire could be used for assessment of "near miss" practices that could jeopardize patient safety and gives several benefits instead of assessing rare adverse events only. The higher frequencies of "near miss" practices allows for quantitative analysis of the effect of corrective interventions and to benchmark preanalytical quality not only at the laboratory/hospital level but also at the health care unit/hospital ward.

Are triage questions sufficient to assign fall risk precautions in the ED?

Science.gov (United States)

Southerland, Lauren T; Slattery, Lauren; Rosenthal, Joseph A; Kegelmeyer, Deborah; Kloos, Anne

2017-02-01

The American College of Emergency Physicians Geriatric Emergency Department (ED) Guidelines and the Center for Disease Control recommend that older adults be assessed for risk of falls. The standard ED assessment is a verbal query of fall risk factors, which may be inadequate. We hypothesized that the addition of a functional balance test endorsed by the Center for Disease Control Stop Elderly Accidents, Deaths, and Injuries Falls Prevention Guidelines, the 4-Stage Balance Test (4SBT), would improve the detection of patients at risk for falls. Prospective pilot study of a convenience sample of ambulatory adults 65 years and older in the ED. All participants received the standard nursing triage fall risk assessment. After patients were stabilized in their ED room, the 4SBT was administered. The 58 participants had an average age of 74.1 years (range, 65-94), 40.0% were women, and 98% were community dwelling. Five (8.6%) presented to the ED for a fall-related chief complaint. The nursing triage screen identified 39.7% (n=23) as at risk for falls, whereas the 4SBT identified 43% (n=25). Combining triage questions with the 4SBT identified 60.3% (n=35) as at high risk for falls, as compared with 39.7% (n=23) with triage questions alone (Ppatients at high risk by 4SBT and missed by triage questions were inpatients unaware that they were at risk for falls (new diagnoses). Incorporating a quick functional test of balance into the ED assessment for fall risk is feasible and significantly increases the detection of older adults at risk for falls. Copyright © 2016 Elsevier Inc. All rights reserved.

A Note on Confidence Interval for the Power of the One Sample Test

Directory of Open Access Journals (Sweden)

A. Wong

2010-01-01

Full Text Available In introductory statistics texts, the power of the test of a one-sample mean when the variance is known is widely discussed. However, when the variance is unknown, the power of the Student's -test is seldom mentioned. In this note, a general methodology for obtaining inference concerning a scalar parameter of interest of any exponential family model is proposed. The method is then applied to the one-sample mean problem with unknown variance to obtain a (1−100% confidence interval for the power of the Student's -test that detects the difference (−0. The calculations require only the density and the cumulative distribution functions of the standard normal distribution. In addition, the methodology presented can also be applied to determine the required sample size when the effect size and the power of a size test of mean are given.

Failure analysis of burst tested fuel tube samples

International Nuclear Information System (INIS)

Padmaprabu, C.; Ramana Rao, S.V.; Srivatsava, R.K.

2005-01-01

The Total Circumferential Elongation (TCE) is an important parameter for evaluation of ductility of the Zircaloy-4 fuel tubes for the PHWR reactors. The TCE values of the fuel tubes were obtained using the burst testing technique. In some lots there is a variation in the values of the TCE. To investigate the reasons for such a large variation in the TCE, samples were selected at appropriate intervals and sectioned at the fractured portion. The surface morphology of the fractured surfaces was examined under Scanning Electron Microscope (SEM) equipped with Energy Dispersive Spectrometer (EDS). The morphologies show segregation of elements at specific locations. Energy dispersive spectra was obtained from those segregated particles. According to the magnitude of TCE value the samples were classified into low, intermediate and high ductility. Low ductility samples were found to contain large amount of segregations along the thickness direction of the tube. This forms a brittle region and a path for the easy crack growth along thickness direction. In the case of intermediate samples the segregation occurred in fewer locations compared to low ductile samples and also confined to the circumferential direction of the outside surface of the tube. Due to this, probability of crack formation at the surface of the tube could be high. But crack growth would be slower in the ductile matrix along the thickness direction resulting in the enhancement of TCE value compared to the low ductile sample. In the high ductile samples, the segregations were very scarce and found to be isolated and embedded in the ductile matrix. The mode of failure in these types of samples was found to be purely ductile. Cracks were found to originate solely from the micro voids in the material. As the probability of crack formation and its propagation is low, very high TCE values were observed in these samples. Microstructural observations of fractured surfaces and EDAX analysis was able to identify the

Questioning in Distributed Product Development Teams: Supporting Shared Understanding

DEFF Research Database (Denmark)

Cash, Philip; Ahmed-Kristensen, Saeema

2015-01-01

globally distributed NPD activities. Poor shared understanding can ultimately result in delays and rework. One major antecedent of shared understanding development is question asking. This work uses a quasiexperimental study to test the impact of questioning support on different types of distributed teams...

Question popularity analysis and prediction in community question answering services.

Science.gov (United States)

Liu, Ting; Zhang, Wei-Nan; Cao, Liujuan; Zhang, Yu

2014-01-01

With the blooming of online social media applications, Community Question Answering (CQA) services have become one of the most important online resources for information and knowledge seekers. A large number of high quality question and answer pairs have been accumulated, which allow users to not only share their knowledge with others, but also interact with each other. Accordingly, volumes of efforts have been taken to explore the questions and answers retrieval in CQA services so as to help users to finding the similar questions or the right answers. However, to our knowledge, less attention has been paid so far to question popularity in CQA. Question popularity can reflect the attention and interest of users. Hence, predicting question popularity can better capture the users' interest so as to improve the users' experience. Meanwhile, it can also promote the development of the community. In this paper, we investigate the problem of predicting question popularity in CQA. We first explore the factors that have impact on question popularity by employing statistical analysis. We then propose a supervised machine learning approach to model these factors for question popularity prediction. The experimental results show that our proposed approach can effectively distinguish the popular questions from unpopular ones in the Yahoo! Answers question and answer repository.

Frictional sliding tests on combined coal-rock samples

Directory of Open Access Journals (Sweden)

Tao Wang

2014-06-01

Full Text Available A test system was developed to understand the sliding mechanism of coal-rock structure. The test system was composed by a double-shear testing model and an acousto-optic monitoring system in association with a digital camera and an acoustic emission (AE instrument. The tests can simulate the movement of activated faults and the sliding in coal-rock structure. In this regard, instable sliding conditions of coal-rock samples, sliding types under different conditions, displacement evolution law, and AE characteristics during sliding process were investigated. Several sliding types were monitored in the tests, including unstable continuous sliding, unstable discontinuous sliding, and stable sliding. The sliding types have close relation with the axial loads and loading rates. Larger axial load and smaller loading rate mean that unstable sliding is less likely to occur. The peak shear stress was positively correlated with the axial load when sliding occurred, whereas the displacement induced by unstable sliding was uncorrelated with the axial load. A large number of AE events occurred before sliding, and the AE rate decreased after stable sliding. The results show that the tests can well simulate the process of structural instability in a coal bump, and are helpful in the understanding of fault activation and the physical processes during squeezing process of roof and floor.

Statistical sampling methods for soils monitoring

Science.gov (United States)

Ann M. Abbott

2010-01-01

Development of the best sampling design to answer a research question should be an interactive venture between the land manager or researcher and statisticians, and is the result of answering various questions. A series of questions that can be asked to guide the researcher in making decisions that will arrive at an effective sampling plan are described, and a case...

Robustness Analysis of Visual Question Answering Models by Basic Questions

KAUST Repository

Huang, Jia-Hong

2017-11-01

Visual Question Answering (VQA) models should have both high robustness and accuracy. Unfortunately, most of the current VQA research only focuses on accuracy because there is a lack of proper methods to measure the robustness of VQA models. There are two main modules in our algorithm. Given a natural language question about an image, the first module takes the question as input and then outputs the ranked basic questions, with similarity scores, of the main given question. The second module takes the main question, image and these basic questions as input and then outputs the text-based answer of the main question about the given image. We claim that a robust VQA model is one, whose performance is not changed much when related basic questions as also made available to it as input. We formulate the basic questions generation problem as a LASSO optimization, and also propose a large scale Basic Question Dataset (BQD) and Rscore (novel robustness measure), for analyzing the robustness of VQA models. We hope our BQD will be used as a benchmark for to evaluate the robustness of VQA models, so as to help the community build more robust and accurate VQA models.

Robustness Analysis of Visual Question Answering Models by Basic Questions

KAUST Repository

Huang, Jia-Hong

2017-01-01

Visual Question Answering (VQA) models should have both high robustness and accuracy. Unfortunately, most of the current VQA research only focuses on accuracy because there is a lack of proper methods to measure the robustness of VQA models. There are two main modules in our algorithm. Given a natural language question about an image, the first module takes the question as input and then outputs the ranked basic questions, with similarity scores, of the main given question. The second module takes the main question, image and these basic questions as input and then outputs the text-based answer of the main question about the given image. We claim that a robust VQA model is one, whose performance is not changed much when related basic questions as also made available to it as input. We formulate the basic questions generation problem as a LASSO optimization, and also propose a large scale Basic Question Dataset (BQD) and Rscore (novel robustness measure), for analyzing the robustness of VQA models. We hope our BQD will be used as a benchmark for to evaluate the robustness of VQA models, so as to help the community build more robust and accurate VQA models.

Nuclear questions; Le nucleaire en questions

Energy Technology Data Exchange (ETDEWEB)

Berg, Eugene

2012-02-15

Civilian and military nuclear questions fill a multitude of publications these days, especially after the Japanese tsunami and the Fukushima disaster. The author analyses some of them and highlights the links between civil and military nuclear industries, the realities of the nuclear cycle and related industrial questions before concluding on the controversial issue of weapons and their proliferation potential

Testing results of Monte Carlo sampling processes in MCSAD

International Nuclear Information System (INIS)

Pinnera, I.; Cruz, C.; Abreu, Y.; Leyva, A.; Correa, C.; Demydenko, C.

2009-01-01

The Monte Carlo Simulation of Atom Displacements (MCSAD) is a code implemented by the authors to simulate the complete process of atom displacement (AD) formation. This code makes use of the Monte Carlo (MC) method to sample all the processes involved in the gamma and electronic radiation transport through matter. The kernel of the calculations applied to this code relies on a model based on an algorithm developed by the authors, which firstly splits out multiple electron elastic scattering events from those single ones at higher scattering angles and then, from the last one, sampling those leading to AD at high transferred atomic recoil energies. Some tests have been developed to check the sampling algorithms with the help of the corresponding theoretical distribution functions. Satisfactory results have been obtained, which indicate the strength of the methods and subroutines used in the code. (Author)

June 2012 Groundwater Sampling at the Central Nevada Test Area (Data Validation Package)

International Nuclear Information System (INIS)

2013-01-01

The U.S. Department of Energy Office of Legacy Management conducted annual sampling at the Central Nevada Test Area (CNTA) on June 26-27, 2012, in accordance with the 2004 Correction Action Decision Document/Corrective Action Plan for Corrective Action Unit 443: Central Nevada Test Area (CNTA)-Subsurface and the addendum to the 'Corrective Action Decision Document/Corrective Action Plan' completed in 2008. Sampling and analysis were conducted as specified in the Sampling and Analysis Plan for U.S. Department of Energy Office of Legacy Management Sites (LMS/PLN/S04351), continually updated).

May 2011 Groundwater Sampling at the Central Nevada Test Area (Data Validation Package)

International Nuclear Information System (INIS)

2011-01-01

The U.S. Department of Energy Office of Legacy Management conducted annual sampling at the Central Nevada Test Area (CNTA) on May 10-11, 2011, in accordance with the 2004 Correction Action Decision Document/Corrective Action Plan for Corrective Action Unit 443: Central Nevada Test Area (CNTA)-Subsurface and the addendum to the 'Corrective Action Decision Document/Corrective Action Plan' completed in 2008. Sampling and analysis were conducted as specified in the Sampling and Analysis Plan for U.S. Department of Energy Office of Legacy Management Sites (LMS/PLN/S04351), continually updated)

A cryogenic tensile testing apparatus for micro-samples cooled by miniature pulse tube cryocooler

International Nuclear Information System (INIS)

Chen, L B; Liu, S X; Gu, K X; Zhou, Y; Wang, J J

2015-01-01

This paper introduces a cryogenic tensile testing apparatus for micro-samples cooled by a miniature pulse tube cryocooler. At present, tensile tests are widely applied to measure the mechanical properties of materials; most of the cryogenic tensile testing apparatus are designed for samples with standard sizes, while for non-standard size samples, especially for microsamples, the tensile testing cannot be conducted. The general approach to cool down the specimens for tensile testing is by using of liquid nitrogen or liquid helium, which is not convenient: it is difficult to keep the temperature of the specimens at an arbitrary set point precisely, besides, in some occasions, liquid nitrogen, especially liquid helium, is not easily available. To overcome these limitations, a cryogenic tensile testing apparatus cooled by a high frequency pulse tube cryocooler has been designed, built and tested. The operating temperatures of the developed tensile testing apparatus cover from 20 K to room temperature with a controlling precision of ±10 mK. The apparatus configurations, the methods of operation and some cooling performance will be described in this paper. (paper)

DWPF Sample Vial Insert Study-Statistical Analysis of DWPF Mock-Up Test Data

International Nuclear Information System (INIS)

Harris, S.P.

1997-01-01

This report is prepared as part of Technical/QA Task Plan WSRC-RP-97-351 which was issued in response to Technical Task Request HLW/DWPF/TTR-970132 submitted by DWPF. Presented in this report is a statistical analysis of DWPF Mock-up test data for evaluation of two new analytical methods which use insert samples from the existing HydragardTM sampler. The first is a new hydrofluoric acid based method called the Cold Chemical Method (Cold Chem) and the second is a modified fusion method.Both new methods use the existing HydragardTM sampler to collect a smaller insert sample from the process sampling system. The insert testing methodology applies to the DWPF Slurry Mix Evaporator (SME) and the Melter Feed Tank (MFT) samples. Samples in small 3 ml containers (Inserts) are analyzed by either the cold chemical method or a modified fusion method. The current analytical method uses a HydragardTM sample station to obtain nearly full 15 ml peanut vials. The samples are prepared by a multi-step process for Inductively Coupled Plasma (ICP) analysis by drying, vitrification, grinding and finally dissolution by either mixed acid or fusion. In contrast, the insert sample is placed directly in the dissolution vessel, thus eliminating the drying, vitrification and grinding operations for the Cold chem method. Although the modified fusion still requires drying and calcine conversion, the process is rapid due to the decreased sample size and that no vitrification step is required.A slurry feed simulant material was acquired from the TNX pilot facility from the test run designated as PX-7.The Mock-up test data were gathered on the basis of a statistical design presented in SRT-SCS-97004 (Rev. 0). Simulant PX-7 samples were taken in the DWPF Analytical Cell Mock-up Facility using 3 ml inserts and 15 ml peanut vials. A number of the insert samples were analyzed by Cold Chem and compared with full peanut vial samples analyzed by the current methods. The remaining inserts were analyzed by

Air-deployable oil spill sampling devices review phase 2 testing. Volume 1

International Nuclear Information System (INIS)

Hawke, L.; Dumouchel, A.; Fingas, M.; Brown, C.E.

2007-01-01

SAIC Canada tested air deployable oil sampling devices for the Emergencies Science and Technology Division of Environment Canada in order to determine the applicability and status of these devices. The 3 devices tested were: Canada's SABER (sampling autonomous buoy for evidence recovery), the United States' POPEIE (probe for oil pollution evidence in the environment); and, Sweden's SAR Floatation 2000. They were tested for buoyancy properties, drift behaviour and sampler sorbent pickup ratios. The SAR and SABER both had lesser draft and greater freeboard, while the POPEIE had much greater draft than freeboard. All 3 devices could be used for oil sample collection in that their drift characteristics would allow for the SABER and SAR devices to be placed upwind of the slick while the POPEIE device could be placed downwind of an oil spill. The sorbent testing revealed that Sefar sorbent and Spectra sorbent used in the 3 devices had negative pickup ratios for diesel but performance improved as oil viscosity increased. Both sorbents are inert and capable of collecting oil in sufficient volumes for consistent fingerprinting analysis. 10 refs., 8 tabs., 8 figs

Questioning Chemistry: The Role of Level, Familiarity, Language and Taxonomy

Science.gov (United States)

Rodrigues, Susan; Taylor, Neil; Cameron, Margaret; Syme-Smith, Lorraine; Fortuna, Colette

2010-01-01

This paper reports on data collected via an audience response system, where a convenience sample of 300 adults aged 17-50 pressed a button to register their answers for twenty multiple choice questions. The responses were then discussed with the respondents at the time. The original dataset includes physics, biology and chemistry questions. The…

40 CFR 205.57-2 - Test vehicle sample selection.

Science.gov (United States)

2010-07-01

... pursuant to a test request in accordance with this subpart will be selected in the manner specified in the... then using a table of random numbers to select the number of vehicles as specified in paragraph (c) of... with the desig-nated AQL are contained in Appendix I, -Table II. (c) The appropriate batch sample size...

Does Educator Training or Experience Affect the Quality of Multiple-Choice Questions?

Science.gov (United States)

Webb, Emily M; Phuong, Jonathan S; Naeger, David M

2015-10-01

Physicians receive little training on proper multiple-choice question (MCQ) writing methods. Well-constructed MCQs follow rules, which ensure that a question tests what it is intended to test. Questions that break these are described as "flawed." We examined whether the prevalence of flawed questions differed significantly between those with or without prior training in question writing and between those with different levels of educator experience. We assessed 200 unedited MCQs from a question bank for our senior medical student radiology elective: an equal number of questions (50) were written by faculty with previous training in MCQ writing, other faculty, residents, and medical students. Questions were scored independently by two readers for the presence of 11 distinct flaws described in the literature. Questions written by faculty with MCQ writing training had significantly fewer errors: mean 0.4 errors per question compared to a mean of 1.5-1.7 errors per question for the other groups (P Educator experience alone had no effect on the frequency of flaws; faculty without dedicated training, residents, and students performed similarly. Copyright © 2015 AUR. Published by Elsevier Inc. All rights reserved.

Electrofracturing test system and method of determining material characteristics of electrofractured material samples

Science.gov (United States)

Bauer, Stephen J.; Glover, Steven F.; Pfeifle, Tom; Su, Jiann-Cherng; Williamson, Kenneth Martin; Broome, Scott Thomas; Gardner, William Payton

2017-08-01

A device for electrofracturing a material sample and analyzing the material sample is disclosed. The device simulates an in situ electrofracturing environment so as to obtain electrofractured material characteristics representative of field applications while allowing permeability testing of the fractured sample under in situ conditions.

Performance Evaluation of Commercial Dengue Diagnostic Tests for Early Detection of Dengue in Clinical Samples

Directory of Open Access Journals (Sweden)

Tuan Nur Akmalina Mat Jusoh

2017-01-01

Full Text Available The shattering rise in dengue virus infections globally has created a need for an accurate and validated rapid diagnostic test for this virus. Rapid diagnostic test (RDT and reverse transcription-polymerase chain reaction (RT-PCR diagnostic detection are useful tools for diagnosis of early dengue infection. We prospectively evaluated the diagnostic performance of nonstructural 1 (NS1 RDT and real-time RT-PCR diagnostic kits in 86 patient serum samples. Thirty-six samples were positive for dengue NS1 antigen while the remaining 50 were negative when tested with enzyme-linked immunosorbent assay (ELISA. Commercially available RDTs for NS1 detection, RTK ProDetect™, and SD Bioline showed high sensitivity of 94% and 89%, respectively, compared with ELISA. GenoAmp® Trioplex Real-Time RT-PCR and RealStar® Dengue RT-PCR tests presented a comparable kappa agreement with 0.722. The result obtained from GenoAmp® Real-Time RT-PCR Dengue test showed that 14 samples harbored dengue virus type 1 (DENV-1, 8 samples harbored DENV-2, 2 samples harbored DENV-3, and 1 sample harbored DENV-4. 1 sample had a double infection with DENV-1 and DENV-2. The NS1 RDTs and real-time RT-PCR tests were found to be a useful diagnostic for early and rapid diagnosis of acute dengue and an excellent surveillance tool in our battle against dengue.

Tests of gas sampling electromagnetic shower calorimeter

International Nuclear Information System (INIS)

Barbaro-Galtieri, A.; Carithers, W.; Day, C.; Johnson, K.J.; Wenzel, W.A.; Videau, H.

1983-01-01

An electromagnetic shower gas-sampling calorimeter has been tested in both Geiger and proportional discharge modes for incident electron energies in the range 0.125-16 GeV. The 0.2 radiation length-thick layers were lead-fiberglass laminates with cathode strips normal to the sense wires. The 5x10 mm 2 Geiger cells were formed with uniformly spaced nylon fibers perpendicular to the wires. Proportional mode measurements were carried out in the pressure range 1-10 atm. A Monte Carlo simulation is in good agreement with measured shower characteristics and has been used to predict the behavior for oblique of incidence and for various Geiger cell dimensions. (orig.)

ACER Chemistry Test Item Collection. ACER Chemtic Year 12.

Science.gov (United States)

Australian Council for Educational Research, Hawthorn.

The chemistry test item banks contains 225 multiple-choice questions suitable for diagnostic and achievement testing; a three-page teacher's guide; answer key with item facilities; an answer sheet; and a 45-item sample achievement test. Although written for the new grade 12 chemistry course in Victoria, Australia, the items are widely applicable.…

Effect of microbiological testing on subsequent mid-infrared milk component analysis of the same milk sample.

Science.gov (United States)

Wojciechowski, Karen L; Melilli, Caterina; Barbano, David M

2014-09-01

Our objectives were to determine if mixing and sampling of a raw milk sample at 4°C for determination of total bacteria count (TBC) and if incubation at 14°C for 18h and sampling for a preliminary incubation (PI) count influenced the accuracy of subsequent fat, protein, or lactose measurement by mid-infrared (IR) analysis of milk from the same sample container due to either nonrepresentative sampling or the presence of microbial metabolites produced by microbial growth in the milk from the incubation. Milks of 4 fat levels (2.2, 3, 4, and 5%) reflected the range of fat levels encountered in producer milks. If the portion of milk removed from a cold sample was not representative, then the effect on a milk component test would likely be larger as fat content increases. Within the milks at each fat level, 3 treatments were used: (1) 20 vials of the same milk sampled for testing TBC using a BactoScan FC and then used for a milk component test; (2) 20 vials for testing TBC plus PI count followed by component test; and (3) 20 vials to run for IR component test without a prior micro sampling and testing. This was repeated in 3 different weeks using a different batch of milk each week. No large effect on the accuracy of component milk testing [IR fat B (carbon hydrogen stretch) and fat A (carbonyl stretch)] due to the cold milk sample handling and mixing procedures used for TBC was detected, confirming the fact that the physical removal of milk from the vial by the BactoScan FC (Foss Electric, Hillerød, Denmark) was a representative portion of the milk. However, the representativeness of any other sampling procedure (manual or automated) of a cold milk sample before running milk component testing on the same container of milk should be demonstrated and verified periodically as a matter of routine laboratory quality assurance. Running TBC with a BactoScan FC first and then IR milk analysis after had a minimal effect on milk component tests by IR when milk bacteria counts

Advances in paper-based sample pretreatment for point-of-care testing.

Science.gov (United States)

Tang, Rui Hua; Yang, Hui; Choi, Jane Ru; Gong, Yan; Feng, Shang Sheng; Pingguan-Murphy, Belinda; Huang, Qing Sheng; Shi, Jun Ling; Mei, Qi Bing; Xu, Feng

2017-06-01

In recent years, paper-based point-of-care testing (POCT) has been widely used in medical diagnostics, food safety and environmental monitoring. However, a high-cost, time-consuming and equipment-dependent sample pretreatment technique is generally required for raw sample processing, which are impractical for low-resource and disease-endemic areas. Therefore, there is an escalating demand for a cost-effective, simple and portable pretreatment technique, to be coupled with the commonly used paper-based assay (e.g. lateral flow assay) in POCT. In this review, we focus on the importance of using paper as a platform for sample pretreatment. We firstly discuss the beneficial use of paper for sample pretreatment, including sample collection and storage, separation, extraction, and concentration. We highlight the working principle and fabrication of each sample pretreatment device, the existing challenges and the future perspectives for developing paper-based sample pretreatment technique.

Can multiple-choice questions simulate free-response questions?

OpenAIRE

Lin, Shih-Yin; Singh, Chandralekha

2016-01-01

We discuss a study to evaluate the extent to which free-response questions could be approximated by multiple-choice equivalents. Two carefully designed research-based multiple-choice questions were transformed into a free-response format and administered on the final exam in a calculus-based introductory physics course. The original multiple-choice questions were administered in another similar introductory physics course on final exam. Findings suggest that carefully designed multiple-choice...

Acceptance Sampling Plans Based on Truncated Life Tests for Sushila Distribution

Directory of Open Access Journals (Sweden)

Amer Ibrahim Al-Omari

2018-03-01

Full Text Available An acceptance sampling plan problem based on truncated life tests when the lifetime following a Sushila distribution is considered in this paper. For various acceptance numbers, confidence levels and values of the ratio between fixed experiment time and particular mean lifetime, the minimum sample sizes required to ascertain a specified mean life were found. The operating characteristic function values of the suggested sampling plans and the producer’s risk are presented. Some tables are provided and the results are illustrated by an example of a real data set.

Lexical patterns in the reading comprehension section of the toefl test

Directory of Open Access Journals (Sweden)

Fabiana Macmillan

2006-11-01

Full Text Available The TOEFL (Test of English as a Foreign Language is currently one of the most widely accepted English language proficiency tests. Designed by the ETS (Educational Testing Service, the main purpose of the TOEFL is to determine whether the English language skills of a student applying to a North American college or university are adequate for enrollment into the selected program of study. This study will focus upon the third section of the TOEFL, Reading Comprehension, which consists of several passages followed by questions with different testing purposes. An adaptation of Hoey's (1991 analytical system for the analysis of lexical cohesion in authentic texts will be used to identify bonds connecting reading comprehension questions on the test to key excerpts in the passages they are related to. A number of sample reading comprehension questions taken from practice tests produced by the ETS will be analyzed. The analysis will focus on the relationship between the testing purpose of each question and the type(s of lexical link involved in the identification of the correct answer.

501 reading comprehension questions

CERN Document Server

2014-01-01

This updated edition offers the most extensive and varied practice for all types of questions students might face on standardized and in-class tests. With this guide, students will learn to develop expert reading strategies, understand how to read faster and with greater comprehension, overcome reading anxiety, and increase appreciation of reading for pleasure. This book's step-by-step approach provides graduated coverage that moves from the basics to more advanced reading.

DWPF Sample Vial Insert Study-Statistical Analysis of DWPF Mock-Up Test Data

Energy Technology Data Exchange (ETDEWEB)

Harris, S.P. [Westinghouse Savannah River Company, AIKEN, SC (United States)

1997-09-18

This report is prepared as part of Technical/QA Task Plan WSRC-RP-97-351 which was issued in response to Technical Task Request HLW/DWPF/TTR-970132 submitted by DWPF. Presented in this report is a statistical analysis of DWPF Mock-up test data for evaluation of two new analytical methods which use insert samples from the existing HydragardTM sampler. The first is a new hydrofluoric acid based method called the Cold Chemical Method (Cold Chem) and the second is a modified fusion method.Either new DWPF analytical method could result in a two to three fold improvement in sample analysis time.Both new methods use the existing HydragardTM sampler to collect a smaller insert sample from the process sampling system. The insert testing methodology applies to the DWPF Slurry Mix Evaporator (SME) and the Melter Feed Tank (MFT) samples.The insert sample is named after the initial trials which placed the container inside the sample (peanut) vials. Samples in small 3 ml containers (Inserts) are analyzed by either the cold chemical method or a modified fusion method. The current analytical method uses a HydragardTM sample station to obtain nearly full 15 ml peanut vials. The samples are prepared by a multi-step process for Inductively Coupled Plasma (ICP) analysis by drying, vitrification, grinding and finally dissolution by either mixed acid or fusion. In contrast, the insert sample is placed directly in the dissolution vessel, thus eliminating the drying, vitrification and grinding operations for the Cold chem method. Although the modified fusion still requires drying and calcine conversion, the process is rapid due to the decreased sample size and that no vitrification step is required.A slurry feed simulant material was acquired from the TNX pilot facility from the test run designated as PX-7.The Mock-up test data were gathered on the basis of a statistical design presented in SRT-SCS-97004 (Rev. 0). Simulant PX-7 samples were taken in the DWPF Analytical Cell Mock

Using Multiple-Choice Questions to Evaluate In-Depth Learning of Economics

Science.gov (United States)

Buckles, Stephen; Siegfried, John J.

2006-01-01

Multiple-choice questions are the basis of a significant portion of assessment in introductory economics courses. However, these questions, as found in course assessments, test banks, and textbooks, often fail to evaluate students' abilities to use and apply economic analysis. The authors conclude that multiple-choice questions can be used to…

Four Questions

Science.gov (United States)

Hark-Weber, Amara G., Ed.

2013-01-01

The author is pleased to introduce a new section in "TAJ," Four Questions. The structure is simple: four questions are asked to teaching artists working in various media and locations. The questions are always the same, but because each teaching artist's approach is unique, their answers will provide an insight into particular methodologies that…

Principles of Work Sample Testing. 1. A Non-Empirical Taxonomy of Test Uses

Science.gov (United States)

1979-04-01

UNIVERSITY % ’ Bowling Green , Ohio 43403 e April 1979 Contract DAHC 19-77-C-0007 Cj Prepared for U.S. ARMY RESEARCH INSTITUTEfor the BEHAVIORAL and...inferring changes in enotionality, and GSR is said to be a measure of emotion . Much of psychological measurement is derived measurement, but it is...ARI TECHNICAL REPORT TR-79-A8 Principles of Work Sample Testingi I. A Non-Empirical Taxonomy of Test Uses b y Robert M. Guion BOWLING GREEN STATE

Results from tests of TFL Hydragard sampling loop

International Nuclear Information System (INIS)

Steimke, J.L.

1995-03-01

When the Defense Waste Processing Facility (DWPF) is operational, processed radioactive sludge will be transferred in batches to the Slurry Mix Evaporator (SME), where glass frit will be added and the contents concentrated by boiling. Batches of the slurry mixture are transferred from the SME to the Melter Feed Tank (MFT). Hydragard reg-sign sampling systems are used on the SME and the MFT for collecting slurry samples in vials for chemical analysis. An accurate replica of the Hydragard sampling system was built and tested in the thermal Fluids Laboratory (TFL) to determine the hydragard accuracy. It was determined that the original Hydragard valve frequently drew a non-representative sample stream through the sample vial that ranged from frit enriched to frit depleted. The Hydragard valve was modified by moving the plunger and its seat backwards so that the outer surface of the plunger was flush with the inside diameter of the transfer line when the valve was open. The slurry flowing through the vial accurately represented the composition of the slurry in the reservoir for two types of slurries, different dilution factors, a range of transfer flows and a range of vial flows. It was then found that the 15 ml of slurry left in the vial when the Hydragard valve was closed, which is what will be analyzed at DWPF, had a lower ratio of frit to sludge as characterized by the lithium to iron ratio than the slurry flowing through it. The reason for these differences is not understood at this time but it is recommended that additional experimentation be performed with the TFL Hydragard loop to determine the cause

Question-asking behavior as a form of cognitive activity

Directory of Open Access Journals (Sweden)

Elvira A. Baranova

2017-03-01

Full Text Available Children’s questions are an indicator of active cognitive perception of reality. Questions but not answers are relevant in revealing a child’s mental life, consciousness and thinking. The lack of question-asking skills can hinder learning, searching and exploration in children. To determine in 7- and 8-year-old school children the common and variable peculiarities of designing a search process for necessary information concerning an unknown object by volitionally formulated questions, as well as the dynamics of the questioning process throughout a school year. The study was based on an experimental methodology, codenamed Guess what there is in the box, and was conducted in four schools in Cheboksary. The sample comprised 158 primary school first-graders who took part in a confirmatory experiment twice, once in September and once in May. The research showed that 96.3% of the questions asked were search questions. Only 30% of the first-graders initiated their searching activities of their own will without having to resort to the given search algorithm, while 70% did not begin asking questions without outside stimulation. The analysis of the dynamics of children’s question-asking behavior exhibited a tendency to decrease in a number of questions asked over the course of the school year. Primary school children need psychological and pedagogical scaffolding aimed at developing a question-asking behavior as a form of cognitive activity to achieve a possible age potential in development.

Performances on five verbal fluency tests in a healthy, elderly Danish sample

DEFF Research Database (Denmark)

Stokholm, Jette; Jørgensen, Kasper; Vogel, Asmus

2013-01-01

Verbal fluency tests are widely used as measures of language and executive functions. This study presents data for five tests; semantic fluency (animals, supermarket items and alternating between cities and professions), lexical fluency (s-words), and action fluency (verbs) based on a sample of 100...

Report of testing and sampling of municipal supply well PM-4

International Nuclear Information System (INIS)

Koch, Richard J.; Longmire, Patrick; Rogers, David B.; Mullen, Ken

1999-01-01

During drilling of regional aquifer characterization borehole R-25, located in the western part of Los Alamos National Laboratory (LANL) at Technical Area (TA) 16, groundwater samples were collected from perched zones of saturation and the regional aquifer that contained elevated levels of high explosive (HE) compounds. One of the nearest Los Alamos County municipal supply wells potentially located down gradient from borehole R-25 is PM-4, located on Mesita del Buey at the west end of TA-54. During the winter of 1998 and 1999 the pump in PM-4 had been removed from the well for scheduled maintenance by the Los Alamos County Public Utilities Department (PUD). Because the pump was removed from PM-4, the opportunity existed to enter the well to (1) perform tests to determine where within the regional aquifer groundwater entered the well and (2) collect groundwater samples from the producing zones for analyses to determine if HE contaminants were present in discrete zones within the regional aquifer. The report of the activities that were performed during March 1999 for the testing and sampling of municipal supply well PM-4 is provided. The report provides a description of the field activities associated with the two phases of the project, including (1) the results of the static and dynamic spinner log surveys, and (2) a description of the sampling activities and the field-measured groundwater quality parameters that were obtained during sampling activities. This report also provides the analytical results of the groundwater samples and a brief discussion of the results of the project

Assessing clinical reasoning in optometry using the script concordance test.

Science.gov (United States)

Faucher, Caroline; Dufour-Guindon, Marie-Pier; Lapointe, Gabrielle; Gagnon, Robert; Charlin, Bernard

2016-05-01

Clinical reasoning is central to any health profession but its development among learners is difficult to assess. Over the last few decades, the script concordance test (SCT) has been developed to solve this dilemma and has been used in many health professions; however, no study has been published on the use of the script concordance test in optometry. The purpose of this study was to develop and validate a script concordance test for the field of optometry. A 101-question script concordance test (27 short clinical scenarios) was developed and administered online to a convenience sample of 23 second-year and 19 fourth-year students of optometry. It was also administered to a reference panel of 12 experienced optometrists to develop the scoring key. An item-total correlation was calculated for each question. Cronbach's alpha coefficient was used to evaluate the script concordance test reliability and a t-test compared the two groups. A final 77-question script concordance test was created by eliminating questions with low item-total correlation. Cronbach's alpha for this optimised 77-question script concordance test was 0.80. A group comparison revealed that the second-year students' scores (n = 23; mean score = 66.4 ± 7.87 per cent) were statistically lower (t = -4.141; p Optometry © 2016 Optometry Australia.

Sample damage investigation by laboratory testing and DDM modelling by FRACOD2D of Brazilian tests on Toki granite

International Nuclear Information System (INIS)

Lanaro, Flavio; Sato, Toshinori; Funato, Akio

2008-01-01

Numerical scooping calculations by means of FRACOD 2D had shown that Brazilian test models present a bend in the relation between the sample deformation perpendicularly to the loading direction and the load itself. The input 'direct' tensile strength of the rock could be re-obtained based on the numerical load at the bend. In this study, a similar technique is applied to specially designed Brazilian tests on Toki granite (Gifu, Japan) which also exhibits such bend for a tensile stress in the centre of the samples of about 2.6 MPa. However, the samples show a wide range of Brazilian tensile strengths that appear to be negatively correlated to the level of in-situ stress at the depth where the samples were taken. The correlation was interpreted as an effect of sample damage due to drilling in a stressed rock mass. Numerical models were designed with various preexist ent crack patterns to simulate the sample damage. The numerical results show Brazilian peak strength results ranging between 6.7 and 13.0 MPa, which are very realistic considering that the laboratory Brazilian tensile strength was observed to vary between 4.1 and 11.3 MPa. These values are all larger than the stress at the bend which is then interpreted as the tensile strength of the weakest grains in the granite. It is also shown that the occurrence of newly initiated cracks at the bend completely changes the stress distribution and failure mechanism of the samples: this explains why the Brazilian tensile strength should be higher than the 'direct' tensile strength of the rock from uniaxial tests. (author)

Phrasal Paraphrase Based Question Reformulation for Archived Question Retrieval.

Directory of Open Access Journals (Sweden)

Yu Zhang

Full Text Available Lexical gap in cQA search, resulted by the variability of languages, has been recognized as an important and widespread phenomenon. To address the problem, this paper presents a question reformulation scheme to enhance the question retrieval model by fully exploring the intelligence of paraphrase in phrase-level. It compensates for the existing paraphrasing research in a suitable granularity, which either falls into fine-grained lexical-level or coarse-grained sentence-level. Given a question in natural language, our scheme first detects the involved key-phrases by jointly integrating the corpus-dependent knowledge and question-aware cues. Next, it automatically extracts the paraphrases for each identified key-phrase utilizing multiple online translation engines, and then selects the most relevant reformulations from a large group of question rewrites, which is formed by full permutation and combination of the generated paraphrases. Extensive evaluations on a real world data set demonstrate that our model is able to characterize the complex questions and achieves promising performance as compared to the state-of-the-art methods.

Comparative evaluation of blood and serum samples in rapid immunochromatographic tests for visceral leishmaniasis.

Science.gov (United States)

Kumar, Dinesh; Khanal, Basudha; Tiwary, Puja; Mudavath, Shyam Lal; Tiwary, Narendra K; Singh, Rupa; Koirala, Kanika; Boelaert, Marleen; Rijal, Suman; Sundar, Shyam

2013-12-01

Rapid diagnostic tests (RDTs) based on the detection of specific antibodies in serum are commonly used for the diagnosis of visceral leishmaniasis (VL). Several commercial kits are available, and some of them allow the use of whole-blood samples instead of serum. An RDT is much more user-friendly for blood samples than for serum samples. In this study, we examined the sensitivities and specificities of six different commercially available immunochromatographic tests for their accuracy in detecting Leishmania infection in whole blood and serum of parasitologically confirmed VL cases. This study was performed in areas of India and Nepal where VL is endemic. A total of 177 confirmed VL cases, 208 healthy controls from areas of endemicity (EHCs), 26 malaria patients (MP), and 37 tuberculosis (TB) patients were enrolled. The reproducibilities of the blood and serum results and between-reader and between-laboratory results were tested. In India, the sensitivities of all the RDTs ranged between 94.7 and 100.0%, with no significant differences between whole blood and serum. The specificities ranged between 92.4 and 100.0%, except for the specificity of the Onsite Leishmania Ab RevB kit, which was lower (33.6 to 42.0%). No differences in specificities were observed for blood and serum. In Nepal, the sensitivities of all the test kits, for whole-blood as well as serum samples, ranged between 96.3 and 100.0%, and the specificities ranged between 90.1 and 96.1%, again with the exception of that of the Onsite Leishmania Ab RevB test, which was markedly lower (48.7 to 49.3%). The diagnostic accuracies of all the tests, except for one brand, were excellent for the whole-blood and serum samples. We conclude that whole blood is an adequate alternative for serum in RDTs for VL, with sensitivities and specificities comparable to those obtained in serum samples, provided that the test kit is of overall good quality.

Assessing the quality of pharmacist answers to telephone drug information questions.

Science.gov (United States)

Woodward, C T; Stevenson, J G; Poremba, A

1990-04-01

A quality assurance (QA) program is described in which frontline pharmacists were asked test drug information questions via anonymous telephone calls. The program was instituted at a university hospital that began providing decentralized pharmaceutical services in 1985. Questions were developed on the basis of a pilot study conducted to determine the types and complexity of drug information questions received by frontline pharmacists at the hospital. Data on departmental clinical productivity were used to determine the number of questions that would be posed during each shift in the various service areas. The questions were posed during a 10-day period; the pharmacists were aware of the program, but the callers did not identify their affiliation with it. In response to 105 questions asked, 86 were judged to have been answered correctly, 13 answers were deemed incomplete, and 6 were judged incorrect. Pharmacists were more likely to respond incorrectly to complex questions and questions posed during the night shift. As a result of the audit, staff members with advanced clinical knowledge were asked to help less experienced pharmacists, the position of assistant director for drug information and staff development was created, and educational programs were instituted. The QA audit has been repeated twice. Posing test drug information questions via anonymous telephone calls is effective in assessing the quality of drug information provided by pharmacists in patient-care areas.

A GMM-Based Test for Normal Disturbances of the Heckman Sample Selection Model

Directory of Open Access Journals (Sweden)

Michael Pfaffermayr

2014-10-01

Full Text Available The Heckman sample selection model relies on the assumption of normal and homoskedastic disturbances. However, before considering more general, alternative semiparametric models that do not need the normality assumption, it seems useful to test this assumption. Following Meijer and Wansbeek (2007, the present contribution derives a GMM-based pseudo-score LM test on whether the third and fourth moments of the disturbances of the outcome equation of the Heckman model conform to those implied by the truncated normal distribution. The test is easy to calculate and in Monte Carlo simulations it shows good performance for sample sizes of 1000 or larger.

Quantitative determination of minerals in Nevada Test Site samples by x-ray diffraction

International Nuclear Information System (INIS)

Pawloski, G.A.

1983-07-01

The external standard intensity ratio technique has been developed into a routine procedure for quantitatively determining mineralogic compositions of Nevada Test Site (NTS) samples by x-ray diffraction. This technique used ratios of x-ray intensity peaks from the same run which eliminates many possible errors. Constants have been determined for each of thirteen minerals commonly found in NTS samples - quartz, montmorillonite, illite, clinoptilolite, cristobalite, feldspars, calcite, dolomite, hornblende, kaolinite, muscovite, biotite, and amorphous glass. Ratios of the highest intensity peak of each mineral to be quantified in the sample and the highest intensity peak of quartz are used to calculate sample composition. The technique has been tested on samples with three to eleven components representative of geologic environments at NTS, and is accurate to 7.0 wt % of the total sample. The minimum amount of each of these minerals detectable by x-ray diffraction has also been determined. QUANTS is a computer code that calculates mineral contents and produces a report sheet. Constants for minerals in NTS samples other than those listed above can easily be determined, and added to QUANTS at any time

Effect of lecture instruction on student performance on qualitative questions

Science.gov (United States)

Heron, Paula R. L.

2015-06-01

The impact of lecture instruction on student conceptual understanding in physics has been the subject of research for several decades. Most studies have reported disappointingly small improvements in student performance on conceptual questions despite direct instruction on the relevant topics. These results have spurred a number of attempts to improve learning in physics courses through new curricula and instructional techniques. This paper contributes to the research base through a retrospective analysis of 20 randomly selected qualitative questions on topics in kinematics, dynamics, electrostatics, waves, and physical optics that have been given in introductory calculus-based physics at the University of Washington over a period of 15 years. In some classes, questions were administered after relevant lecture instruction had been completed; in others, it had yet to begin. Simple statistical tests indicate that the average performance of the "after lecture" classes was significantly better than that of the "before lecture" classes for 11 questions, significantly worse for two questions, and indistinguishable for the remaining seven. However, the classes had not been randomly assigned to be tested before or after lecture instruction. Multiple linear regression was therefore conducted with variables (such as class size) that could plausibly lead to systematic differences in performance and thus obscure (or artificially enhance) the effect of lecture instruction. The regression models support the results of the simple tests for all but four questions. In those cases, the effect of lecture instruction was reduced to a nonsignificant level, or increased to a significant, negative level when other variables were considered. Thus the results provide robust evidence that instruction in lecture can increase student ability to give correct answers to conceptual questions but does not necessarily do so; in some cases it can even lead to a decrease.

Operability test procedure for the Rotary Mode Core Sampling System Exhausters 3 and 4

International Nuclear Information System (INIS)

WSaldo, E.J.

1995-01-01

This document provides a procedure for performing operability testing of the Rotary Mode Core Sampling System Exhausters 3 ampersand 4. Upon completion of testing activities an operability testing report will be issued

Summary of Test Results for Daya Bay Rock Samples

International Nuclear Information System (INIS)

Onishi, Celia Tiemi; Dobson, Patrick; Nakagawa, Seiji

2004-01-01

A series of analytical tests was conducted on a suite of granitic rock samples from the Daya Bay region of southeast China. The objective of these analyses was to determine key rock properties that would affect the suitability of this location for the siting of a neutrino oscillation experiment. This report contains the results of chemical analyses, rock property measurements, and a calculation of the mean atomic weight

Clinical evaluation of human papillomavirus detection by careHPV™ test on physician-samples and self-samples using the indicating FTA Elute® card.

Science.gov (United States)

Wang, Shao-Ming; Hu, Shang-Ying; Chen, Feng; Chen, Wen; Zhao, Fang-Hui; Zhang, Yu-Qing; Ma, Xin-Ming; Qiao, You-Lin

2014-01-01

To make the clinical evaluation of a solid-state human papillomavirus (HPV) sampling medium in combination with an economical HPV testing method (careHPV™) for cervical cancer screening. 396 women aged 25-65 years were enrolled for cervical cancer screening, and four samples were collected. Two samples were collected by woman themselves, among which one was stored in DCM preservative solution (called "liquid sample") and the other was applied on the Whatman Indicating FTA Elute® card (FTA card). Another two samples were collected by physician and stored in DCM preservative solution and FTA card, respectively. All the samples were detected by careHPV™ test. All the women were administered a colposcopy examination, and biopsies were taken for pathological confirmation if necessary. FTA card demonstrated a comparable sensitivity of detecting high grade Cervical Intraepithelial Neoplasia (CIN) with the liquid sample carrier for self and physician-sampling, but showed a higher specificity than that of liquid sample carrier for self-sampling (FTA vs Liquid: 79.0% vs 71.6%, p=0.02). Generally, the FTA card had a comparable accuracy with that of Liquid-based medium by different sampling operators, with an area under the curve of 0.807 for physician and FTA, 0.781 for physician and Liquid, 0.728 for self and FTA, and 0.733 for self and Liquid (p>0.05). FTA card is a promising sample carrier for cervical cancer screening. With appropriate education programmes and further optimization of the experimental workflow, FTA card based self-collection in combination with centralized careHPV™ testing can help expand the coverage of cervical cancer screening in low-resource areas.

A Note on Confidence Interval for the Power of the One Sample Test

OpenAIRE

A. Wong

2010-01-01

In introductory statistics texts, the power of the test of a one-sample mean when the variance is known is widely discussed. However, when the variance is unknown, the power of the Student's -test is seldom mentioned. In this note, a general methodology for obtaining inference concerning a scalar parameter of interest of any exponential family model is proposed. The method is then applied to the one-sample mean problem with unknown variance to obtain a ( 1 − ) 100% confidence interval for...

Testing an Impedance Non-destructive Method to Evaluate Steel-Fiber Concrete Samples

Science.gov (United States)

Komarkova, Tereza; Fiala, Pavel; Steinbauer, Miloslav; Roubal, Zdenek

2018-02-01

Steel-fiber reinforced concrete is a composite material characterized by outstanding tensile properties and resistance to the development of cracks. The concrete, however, exhibits such characteristics only on the condition that the steel fibers in the final, hardened composite have been distributed evenly. The current methods to evaluate the distribution and concentration of a fiber composite are either destructive or exhibit a limited capability of evaluating the concentration and orientation of the fibers. In this context, the paper discusses tests related to the evaluation of the density and orientation of fibers in a composite material. Compared to the approaches used to date, the proposed technique is based on the evaluation of the electrical impedance Z in the band close to the resonance of the sensor-sample configuration. Using analytically expressed equations, we can evaluate the monitored part of the composite and its density at various depths of the tested sample. The method employs test blocks of composites, utilizing the resonance of the measuring device and the measured sample set; the desired state occurs within the interval of between f=3 kHz and 400 kHz.

Evaluation of Pediatric Questions on the Orthopaedic In-Training Examination-An Update.

Science.gov (United States)

Murphy, Robert F; Nunez, Leah; Barfield, William R; Mooney, James F

2017-09-01

Pediatric orthopaedics is tested frequently on the Orthopaedic In-Training Examination (OITE). The most recent data on the pediatrics section of the OITE were generated from content 10 years old. The purpose of this study is to assess the pediatric orthopaedic questions on the 2011 to 2014 OITE, and to compare question categories and cognitive taxonomy with previous data. Four years (2011 to 2014) of OITE questions, answers, and references were reviewed. The number of pediatric questions per year was recorded, as well as presence of a clinical photo or imaging modality. Each question was categorized and assigned a cognitive taxonomy level. Categories included: knowledge; knowledge-treatment modalities; diagnosis; diagnosis/recognition of associated conditions; diagnosis/further studies; and diagnosis/treatment. Cognitive taxonomy levels included: simple recall, interpretation of data, and advanced problem-solving. The 3 most commonly covered topics were upper extremity trauma (17.4%), scoliosis (10.1%), and developmental dysplasia of the hip (5.7%). Compared with previous data, the percentage of pediatric questions was constant (13% vs. 14%). Categorically, the more recent OITE examinations contained significantly fewer questions testing simple knowledge (19% vs. 39%, P=0.0047), and significantly more questions testing knowledge of treatment modalities (17% vs. 9%, P=0.016) and diagnosis with associated conditions (19% vs. 9%, P=0.0034). Regarding cognitive taxonomy, there was a significant increase in the average number of questions that required advanced problem-solving (57% vs. 46%, P=0.048). Significantly more questions utilized clinical photographs and imaging studies (62% vs. 48%, P=0.012). The most common reference materials provided to support correct responses included Lovell and Winter's Pediatric Orthopaedics (25.7%) and the Journal of Pediatric Orthopaedics (23.4%). Although the percentage of pediatric questions on the OITE has remained essentially

HIV testing sites' communication about adolescent confidentiality: potential barriers and facilitators to testing.

Science.gov (United States)

Hyden, Christel; Allegrante, John P; Cohall, Alwyn T

2014-03-01

This study sought to evaluate HIV testing locations in New York City in terms of staff communication of confidentiality policies for adolescent clients. Using the New York State Directory of HIV Counseling and Testing Resources as a sampling frame, this study made telephone contact with 164 public HIV testing locations in New York City and used a semistructured interview to ask questions about confidentiality, parental permission, and parent access to test results. At 48% of locations, either HIV testing was not offered or we were unable to reach a staff member to ask questions about testing options and confidentiality. At the remaining sites, information provided regarding confidentiality, parental consent, and privacy of test results was correct only 69% to 85% of the time. Additionally, 23% of sites successfully contacted offered testing exclusively between 9:00 a.m. and 3:00 p.m. weekdays, when most adolescents are in school. Our findings point to a need for increased training and quality control at the clinical level to ensure that consumers in need of HIV testing are provided with accurate information and accessible services. Furthermore, these results highlight the need for more "patient-centric" sites with enhanced accessibility for potential clients, particularly youth.

On sample size of the kruskal-wallis test with application to a mouse peritoneal cavity study.

Science.gov (United States)

Fan, Chunpeng; Zhang, Donghui; Zhang, Cun-Hui

2011-03-01

As the nonparametric generalization of the one-way analysis of variance model, the Kruskal-Wallis test applies when the goal is to test the difference between multiple samples and the underlying population distributions are nonnormal or unknown. Although the Kruskal-Wallis test has been widely used for data analysis, power and sample size methods for this test have been investigated to a much lesser extent. This article proposes new power and sample size calculation methods for the Kruskal-Wallis test based on the pilot study in either a completely nonparametric model or a semiparametric location model. No assumption is made on the shape of the underlying population distributions. Simulation results show that, in terms of sample size calculation for the Kruskal-Wallis test, the proposed methods are more reliable and preferable to some more traditional methods. A mouse peritoneal cavity study is used to demonstrate the application of the methods. © 2010, The International Biometric Society.

Virtual rough samples to test 3D nanometer-scale scanning electron microscopy stereo photogrammetry.

Science.gov (United States)

Villarrubia, J S; Tondare, V N; Vladár, A E

2016-01-01

The combination of scanning electron microscopy for high spatial resolution, images from multiple angles to provide 3D information, and commercially available stereo photogrammetry software for 3D reconstruction offers promise for nanometer-scale dimensional metrology in 3D. A method is described to test 3D photogrammetry software by the use of virtual samples-mathematical samples from which simulated images are made for use as inputs to the software under test. The virtual sample is constructed by wrapping a rough skin with any desired power spectral density around a smooth near-trapezoidal line with rounded top corners. Reconstruction is performed with images simulated from different angular viewpoints. The software's reconstructed 3D model is then compared to the known geometry of the virtual sample. Three commercial photogrammetry software packages were tested. Two of them produced results for line height and width that were within close to 1 nm of the correct values. All of the packages exhibited some difficulty in reconstructing details of the surface roughness.

Testing and sampling of deep brine aquifers in the Palo Duro Basin, West Texas

International Nuclear Information System (INIS)

Deyling, M.A.

1984-01-01

The US Department of Energy is investigating the Palo Duro Basin of West Texas along with locations in Nevada, Washington, Utah, Mississippi and Louisiana as potential sites for storage of high-level nuclear waste. Ten wells have been drilled to depths between 3000 and 8300 feet. Testing and sampling of deep test zones requires advance planning and analysis of what must be obtained from the well. Various alternatives are available depending on data needs. In this particular instance, both hydrologic and geochemical data were required. The methods chosen were field proven methods used in the oil field industry for many years. Short term testing has included conventional oil-field-type drill stem tests and drill stem equipment with surface pressure readout. Long term testing has consisted of a series of production and recovery tests. Fluid sampling was performed in two stages. The first was at the well head under an imposed pressure of several hundred psi. The second fluid samples were collected downhole at the production zone under pressures close to ambient pressure. The geochemical data and hydrologic data can be used as independent checks on each other in many cases. Test results from the well along with examination of recovered core provided maximum data for each well. 5 references, 8 figures

Construction of Valid and Reliable Test for Assessment of Students

Science.gov (United States)

Osadebe, P. U.

2015-01-01

The study was carried out to construct a valid and reliable test in Economics for secondary school students. Two research questions were drawn to guide the establishment of validity and reliability for the Economics Achievement Test (EAT). It is a multiple choice objective test of five options with 100 items. A sample of 1000 students was randomly…

[Continuing medical education: how to write multiple choice questions].

Science.gov (United States)

Soler Fernández, R; Méndez Díaz, C; Rodríguez García, E

2013-06-01

Evaluating professional competence in medicine is a difficult but indispensable task because it makes it possible to evaluate, at different times and from different perspectives, the extent to which the knowledge, skills, and values required for exercising the profession have been acquired. Tests based on multiple choice questions have been and continue to be among the most useful tools for objectively evaluating learning in medicine. When these tests are well designed and correctly used, they can stimulate learning and even measure higher cognitive skills. Designing a multiple choice test is a difficult task that requires knowledge of the material to be tested and of the methodology of test preparation as well as time to prepare the test. The aim of this article is to review what can be evaluated through multiple choice tests, the rules and guidelines that should be taken into account when writing multiple choice questions, the different formats that can be used, the most common errors in elaborating multiple choice tests, and how to analyze the results of the test to verify its quality. Copyright © 2012 SERAM. Published by Elsevier Espana. All rights reserved.

High priority tank sampling and analysis report

International Nuclear Information System (INIS)

Brown, T.M.

1998-01-01

In July 1993, the Defense Nuclear Facilities Board issued Recommendation 93-5 (Conway 1993) which noted that there was insufficient tank waste technical information and the pace to obtain it was too slow to ensure that Hanford Site wastes could be safely stored, that associated operations could be conducted safely, and that future disposal data requirements could be met. In response, the US Department of Energy, in May 1996, issued Revision 1 of the Recommendation 93-5 Implementation Plan (DOE-RL 1996). The Implementation Plan presented a modified approach to achieve the original plan's objectives, concentrating on actions necessary to ensure that wastes can be safely stored, that operations can be safely conducted, and that timely characterization information for the tank waste Disposal Program could be obtained. The Implementation Plan proposed 28 High Priority tanks for near term core sampling and analysis, which along with sampling and analysis of other non-High Priority tanks, could provide the scientific and technical data to confirm assumptions, calibrate models, and.measure safety related phenomenology of the waste. When the analysis results of the High Priority and other-tank sampling were reviewed, it was expected that a series of 12 questions, 9 related to safety issues and 3 related to planning for the disposal process, should be answered allowing key decisions to be made. This report discusses the execution of the Implementation Plan and the results achieved in addressing the questions. Through sampling and analysis, all nine safety related questions have been answered and extensive data for the three disposal planning related questions have been collected, allowing for key decision making. Many more tanks than the original 28 High Priority tanks identified in the Implementation Plan were sampled and analyzed. Twenty-one High Priority tanks and 85 other tanks were core sampled and used to address the questions. Thirty-eight additional tanks were auger

A simple nomogram for sample size for estimating sensitivity and specificity of medical tests

Directory of Open Access Journals (Sweden)

Malhotra Rajeev

2010-01-01

Full Text Available Sensitivity and specificity measure inherent validity of a diagnostic test against a gold standard. Researchers develop new diagnostic methods to reduce the cost, risk, invasiveness, and time. Adequate sample size is a must to precisely estimate the validity of a diagnostic test. In practice, researchers generally decide about the sample size arbitrarily either at their convenience, or from the previous literature. We have devised a simple nomogram that yields statistically valid sample size for anticipated sensitivity or anticipated specificity. MS Excel version 2007 was used to derive the values required to plot the nomogram using varying absolute precision, known prevalence of disease, and 95% confidence level using the formula already available in the literature. The nomogram plot was obtained by suitably arranging the lines and distances to conform to this formula. This nomogram could be easily used to determine the sample size for estimating the sensitivity or specificity of a diagnostic test with required precision and 95% confidence level. Sample size at 90% and 99% confidence level, respectively, can also be obtained by just multiplying 0.70 and 1.75 with the number obtained for the 95% confidence level. A nomogram instantly provides the required number of subjects by just moving the ruler and can be repeatedly used without redoing the calculations. This can also be applied for reverse calculations. This nomogram is not applicable for testing of the hypothesis set-up and is applicable only when both diagnostic test and gold standard results have a dichotomous category.

Randomized comparison of vaginal self-sampling by standard vs. dry swabs for Human papillomavirus testing

International Nuclear Information System (INIS)

Eperon, Isabelle; Vassilakos, Pierre; Navarria, Isabelle; Menoud, Pierre-Alain; Gauthier, Aude; Pache, Jean-Claude; Boulvain, Michel; Untiet, Sarah; Petignat, Patrick

2013-01-01

To evaluate if human papillomavirus (HPV) self-sampling (Self-HPV) using a dry vaginal swab is a valid alternative for HPV testing. Women attending colposcopy clinic were recruited to collect two consecutive Self-HPV samples: a Self-HPV using a dry swab (S-DRY) and a Self-HPV using a standard wet transport medium (S-WET). These samples were analyzed for HPV using real time PCR (Roche Cobas). Participants were randomized to determine the order of the tests. Questionnaires assessing preferences and acceptability for both tests were conducted. Subsequently, women were invited for colposcopic examination; a physician collected a cervical sample (physician-sampling) with a broom-type device and placed it into a liquid-based cytology medium. Specimens were then processed for the production of cytology slides and a Hybrid Capture HPV DNA test (Qiagen) was performed from the residual liquid. Biopsies were performed if indicated. Unweighted kappa statistics (κ) and McNemar tests were used to measure the agreement among the sampling methods. A total of 120 women were randomized. Overall HPV prevalence was 68.7% (95% Confidence Interval (CI) 59.3–77.2) by S-WET, 54.4% (95% CI 44.8–63.9) by S-DRY and 53.8% (95% CI 43.8–63.7) by HC. Among paired samples (S-WET and S-DRY), the overall agreement was good (85.7%; 95% CI 77.8–91.6) and the κ was substantial (0.70; 95% CI 0.57-0.70). The proportion of positive type-specific HPV agreement was also good (77.3%; 95% CI 68.2-84.9). No differences in sensitivity for cervical intraepithelial neoplasia grade one (CIN1) or worse between the two Self-HPV tests were observed. Women reported the two Self-HPV tests as highly acceptable. Self-HPV using dry swab transfer does not appear to compromise specimen integrity. Further study in a large screening population is needed. ClinicalTrials.gov: http://clinicaltrials.gov/show/NCT01316120

Estimation of sample size and testing power (part 6).

Science.gov (United States)

Hu, Liang-ping; Bao, Xiao-lei; Guan, Xue; Zhou, Shi-guo

2012-03-01

The design of one factor with k levels (k ≥ 3) refers to the research that only involves one experimental factor with k levels (k ≥ 3), and there is no arrangement for other important non-experimental factors. This paper introduces the estimation of sample size and testing power for quantitative data and qualitative data having a binary response variable with the design of one factor with k levels (k ≥ 3).

Input Consistency in the Acquisition of Questions in Bulgarian and English: A Hypothesis Testing Model

Science.gov (United States)

Tornyova, Lidiya

2011-01-01

The goal of this dissertation is to address several major empirical and theoretical issues related to English-speaking children's difficulties with auxiliary use and inversion in questions. The empirical data on English question acquisition are inconsistent due to differences in methods and techniques used. A range of proposals about the source of…

Shrinkage-based diagonal Hotelling’s tests for high-dimensional small sample size data

KAUST Repository

Dong, Kai

2015-09-16

DNA sequencing techniques bring novel tools and also statistical challenges to genetic research. In addition to detecting differentially expressed genes, testing the significance of gene sets or pathway analysis has been recognized as an equally important problem. Owing to the “large pp small nn” paradigm, the traditional Hotelling’s T2T2 test suffers from the singularity problem and therefore is not valid in this setting. In this paper, we propose a shrinkage-based diagonal Hotelling’s test for both one-sample and two-sample cases. We also suggest several different ways to derive the approximate null distribution under different scenarios of pp and nn for our proposed shrinkage-based test. Simulation studies show that the proposed method performs comparably to existing competitors when nn is moderate or large, but it is better when nn is small. In addition, we analyze four gene expression data sets and they demonstrate the advantage of our proposed shrinkage-based diagonal Hotelling’s test.

Shrinkage-based diagonal Hotelling’s tests for high-dimensional small sample size data

KAUST Repository

Dong, Kai; Pang, Herbert; Tong, Tiejun; Genton, Marc G.

2015-01-01

DNA sequencing techniques bring novel tools and also statistical challenges to genetic research. In addition to detecting differentially expressed genes, testing the significance of gene sets or pathway analysis has been recognized as an equally important problem. Owing to the “large pp small nn” paradigm, the traditional Hotelling’s T2T2 test suffers from the singularity problem and therefore is not valid in this setting. In this paper, we propose a shrinkage-based diagonal Hotelling’s test for both one-sample and two-sample cases. We also suggest several different ways to derive the approximate null distribution under different scenarios of pp and nn for our proposed shrinkage-based test. Simulation studies show that the proposed method performs comparably to existing competitors when nn is moderate or large, but it is better when nn is small. In addition, we analyze four gene expression data sets and they demonstrate the advantage of our proposed shrinkage-based diagonal Hotelling’s test.

[Utilization of self-sampling kits for HPV testing in cervical cancer screening - pilot study].

Science.gov (United States)

Ondryášová, H; Koudeláková, V; Drábek, J; Vaněk, P; Slavkovský, R; Hajdúch, M

2015-12-01

To get initial experience with alternative sampling (self-sampling) for HPV testing as the means of cervical cancer screening program. Original work. Institute of Molecular and Translational Medicine, Faculty of Medicine and Dentistry, Palacky University in Olomouc. Based on expression of interest, 215 self-sampling kits were posted to women. Evalyn(®) Brush Vaginal swabs obtained by self-sampling were analyzed for the presence of HPV infection by Cobas 4800 HPV (Roche) followed by genotyping using PapilloCheck(®) HPV-Screening (Greiner Bio-One). Sixty women randomly chosen from our sample were sent a questionnaire focused on their experience with self-sampling. One hundred seventy-four of 215 (81%) distributed self-sampling devices have been delivered to analysis. All cervicovaginal swabs were sampled correctly and it was possible to analyze them by Cobas 4800 HPV test. Similarly, 98% (171/174) samples were analyzable by PapilloCheck(®) HPV-Screening.One hundred twenty-five (72%) of 174 tested samples were HPV negative. Low risk HPV infection was detected only in 7 samples (4%), and high risk HPV (hrHPV) infection was present in 42 samples (24%). The most frequently detected hrHPV genotypes were HPV16 (11/42; 26%) and HPV53 (6/42; 14%). HrHPV co-infection was detected in 10 cases, in 5 of them lrHPV infection was find also.Of the 60 questionnaires, 48 (80%) were returned. From this group, 47 (98%) women rated their experience with self-sampling device as good to excellent. User manual of self-sampling device was considered good to excellent by all women (100%). All women also rated the convenience of self-sampling device using as good to excellent. As expected, most of the women (n = 42 [88%]) preferred self-sampling to physician sampling. Cervicovaginal self-sampling leads to valid results of HPV screening using two molecular genetics methods and was accepted by Czech women very well. The self-sampling as an opportunity to participate in cervical cancer

Will a Black Hole Eventually Swallow Earth?” Fifth Graders' Interest in Questions from a Textbook, an Open Educational Resource and Other Students' Questions

Directory of Open Access Journals (Sweden)

Hani Swirski

2015-12-01

Full Text Available Can questions sent to Open-Educational-Resource (OER websites such as Ask-An-Expert serve as indicators for students’ interest in science? This issue was examined using an online questionnaire which included an equal number of questions about the topics “space” and “nutrition” randomly selected from three different sources: a 5th-grade science textbook, the “Ask-An-Expert” website, and questions collected from other students in the same age group. A sample of 113 5th-graders from two elementary schools were asked to rate their interest level in finding out the answer to these questions without knowledge of their source. Significant differences in students’ interest level were found between questions: textbook questions were ranked lowest for both subjects, and questions from the open-resource were ranked high. This finding suggests that questions sent to an open-resource could be used as an indicator of students’ interest in science. In addition, the high correlation of interests expressed by students from the two schools may point to a potential generalization of the findings. This study contributes by highlighting OER as a new and promising indicator of student interest, which may help bring “student voices” into mainstream science teaching to increase student interest in science.

Effects of Regulatory Self-Questioning on Secondary-Level Students' Problem-Solving Performance

Science.gov (United States)

Pate, Michael L.; Miller, Greg

2011-01-01

A randomized posttest-only control group experimental design was used to determine the effects of regulatory self-questioning on secondary-level career and technical education students' electrical circuit theory test scores. Students who participated in the self-questioning group were asked to answer a list of regulatory questions as they solved…

Testing the sampling efficiency of a nuclear power station stack monitor

Energy Technology Data Exchange (ETDEWEB)

Stroem, L.H. [Instrumentinvest, Nykoeping (Sweden)

1997-08-01

The test method comprises the injection of known amounts of monodisperse particles in the stack air stream, at a suitable point upstream of the sampling installation. To find a suitable injection polls, the gas flow was mapped by means of a tracer gas, released in various points in the stack base. The resulting concentration distributions at the stack sampler level were observed by means of an array of gas detectors. An injection point that produced symmetrical distribution over the stack area, and low concentrations at the stack walls was selected for the particle tests. Monodisperse particles of 6, 10, and 19 {mu}m aerodynamic diameter, tagged with dysprosium, were dispersed in the selected injection point. Particle concentration at the sampler level was measured. The losses to the stack walls were found to be less than 10 %. The particle concentrations at the four sampler inlets were calculated from the observed gas distribution. The amount calculated to be aspirated into the sampler piping was compared with the quantity collected by the sampling train ordinary filter, to obtain the sampling line transmission efficiency. 1 ref., 2 figs.

36 CFR 9.42 - Well records and reports, plots and maps, samples, tests and surveys.

Science.gov (United States)

2010-07-01

... Well records and reports, plots and maps, samples, tests and surveys. Any technical data gathered... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Well records and reports, plots and maps, samples, tests and surveys. 9.42 Section 9.42 Parks, Forests, and Public Property...

21 CFR 809.40 - Restrictions on the sale, distribution, and use of OTC test sample collection systems for drugs...

Science.gov (United States)

2010-04-01

... OTC test sample collection systems for drugs of abuse testing. 809.40 Section 809.40 Food and Drugs... Restrictions on the sale, distribution, and use of OTC test sample collection systems for drugs of abuse testing. (a) Over-the-counter (OTC) test sample collection systems for drugs of abuse testing (§ 864.3260...

A technique for extracting blood samples from mice in fire toxicity tests

Science.gov (United States)

Bucci, T. J.; Hilado, C. J.; Lopez, M. T.

1976-01-01

The extraction of adequate blood samples from moribund and dead mice has been a problem because of the small quantity of blood in each animal and the short time available between the animals' death and coagulation of the blood. These difficulties are particularly critical in fire toxicity tests because removal of the test animals while observing proper safety precautions for personnel is time-consuming. Techniques for extracting blood samples from mice were evaluated, and a technique was developed to obtain up to 0.8 ml of blood from a single mouse after death. The technique involves rapid exposure and cutting of the posterior vena cava and accumulation of blood in the peritoneal space. Blood samples of 0.5 ml or more from individual mice have been consistently obtained as much as 16 minutes after apparent death. Results of carboxyhemoglobin analyses of blood appeared reproducible and consistent with carbon monoxide concentrations in the exposure chamber.

Development of a short sample test facility for evaluating superconducting wires

International Nuclear Information System (INIS)

Singh, M.R.; Kulkarni, D.G.; Sahni, V.C.; Ravikumar, G.; Patel, K.L.

2002-01-01

In this paper we describe a short sample test facility we have set up at Bhabha Atomic Research Centre (BARC). This facility has been used to measure critical currents of NbTi/Cu composite superconducting wires by recording V versus I data at 4.2 K. It offers sample current as large as 1500 A and a transverse magnetic field up to 7.4 T. A power law, V ∼I n( H) is fitted to the resistive transition region to estimate the exponent n, which is a measure of the uniformity of superconducting filaments in composite wires. It is observed that inadequate thermal stabilization of sample wire results in thermal runaway, which limits the V-I data to∼ 2μ V . This in turn affects the reliability of estimated filament uniformity. To mitigate this problem, we have used a sample holder made of OFHC-Cu which enhances thermal stabilization of the sample. With this sample holder, the results of measurements carried out on wires developed by the Atomic Fuel Division, BARC show a high filament uniformity (n ∼ 58). (author)

Explicitly Questioning the Nature of Suggestibility in Preschoolers' Memory and Retention.

Science.gov (United States)

Newcombe, Peter A.; Siegal, Michael

1997-01-01

Investigated preschoolers' suggestible responses on memory tests. Found that exposure to misleading information produced significantly less accurate responses under nonexplicit questioning in recognizing the original from the misleading information than consistent information exposure. Explicit questioning produced more accuracy at seven weeks…

Feasibility of self-sampled dried blood spot and saliva samples sent by mail in a population-based study.

Science.gov (United States)

Sakhi, Amrit Kaur; Bastani, Nasser Ezzatkhah; Ellingjord-Dale, Merete; Gundersen, Thomas Erik; Blomhoff, Rune; Ursin, Giske

2015-04-11

In large epidemiological studies it is often challenging to obtain biological samples. Self-sampling by study participants using dried blood spots (DBS) technique has been suggested to overcome this challenge. DBS is a type of biosampling where blood samples are obtained by a finger-prick lancet, blotted and dried on filter paper. However, the feasibility and efficacy of collecting DBS samples from study participants in large-scale epidemiological studies is not known. The aim of the present study was to test the feasibility and response rate of collecting self-sampled DBS and saliva samples in a population-based study of women above 50 years of age. We determined response proportions, number of phone calls to the study center with questions about sampling, and quality of the DBS. We recruited women through a study conducted within the Norwegian Breast Cancer Screening Program. Invitations, instructions and materials were sent to 4,597 women. The data collection took place over a 3 month period in the spring of 2009. Response proportions for the collection of DBS and saliva samples were 71.0% (3,263) and 70.9% (3,258), respectively. We received 312 phone calls (7% of the 4,597 women) with questions regarding sampling. Of the 3,263 individuals that returned DBS cards, 3,038 (93.1%) had been packaged and shipped according to instructions. A total of 3,032 DBS samples were sufficient for at least one biomarker analysis (i.e. 92.9% of DBS samples received by the laboratory). 2,418 (74.1%) of the DBS cards received by the laboratory were filled with blood according to the instructions (i.e. 10 completely filled spots with up to 7 punches per spot for up to 70 separate analyses). To assess the quality of the samples, we selected and measured two biomarkers (carotenoids and vitamin D). The biomarker levels were consistent with previous reports. Collecting self-sampled DBS and saliva samples through the postal services provides a low cost, effective and feasible

Swab2know: An HIV-Testing Strategy Using Oral Fluid Samples and Online Communication of Test Results for Men Who Have Sex With Men in Belgium.

Science.gov (United States)

Platteau, Tom; Fransen, Katrien; Apers, Ludwig; Kenyon, Chris; Albers, Laura; Vermoesen, Tine; Loos, Jasna; Florence, Eric

2015-09-01

As HIV remains a public health concern, increased testing among those at risk for HIV acquisition is important. Men who have sex with men (MSM) are the most important group for targeted HIV testing in Europe. Several new strategies have been developed and implemented to increase HIV-testing uptake in this group, among them the Swab2know project. In this project, we aim to assess the acceptability and feasibility of outreach and online HIV testing using oral fluid samples as well as Web-based delivery of test results. Sample collection happened between December 2012 and April 2014 via outreach and online sampling among MSM. Test results were communicated through a secured website. HIV tests were executed in the laboratory. Each reactive sample needed to be confirmed using state-of-the-art confirmation procedures on a blood sample. Close follow-up of participants who did not pick up their results, and those with reactive results, was included in the protocol. Participants were asked to provide feedback on the methodology using a short survey. During 17 months, 1071 tests were conducted on samples collected from 898 men. Over half of the samples (553/1071, 51.63%) were collected during 23 outreach sessions. During an 8-month period, 430 samples out of 1071 (40.15%) were collected from online sampling. Additionally, 88 samples out of 1071 (8.22%) were collected by two partner organizations during face-to-face consultations with MSM and male sex workers. Results of 983 out of 1071 tests (91.78%) had been collected from the website. The pickup rate was higher among participants who ordered their kit online (421/430, 97.9%) compared to those participating during outreach activities (559/641, 87.2%; Ponline participants were more likely to have never been tested before (17.3% vs 10.0%; P=.001) and reported more sexual partners in the 6 months prior to participation in the project (mean 7.18 vs 3.23; Ponline counseling tool), and in studying the cost effectiveness of the

Promoting Vicarious Learning of Physics Using Deep Questions with Explanations

Science.gov (United States)

Craig, Scotty D.; Gholson, Barry; Brittingham, Joshua K.; Williams, Joah L.; Shubeck, Keith T.

2012-01-01

Two experiments explored the role of vicarious "self" explanations in facilitating student learning gains during computer-presented instruction. In Exp. 1, college students with low or high knowledge on Newton's laws were tested in four conditions: (a) monologue (M), (b) questions (Q), (c) explanation (E), and (d) question + explanation (Q + E).…

On the comprehensibility and perceived privacy protection of indirect questioning techniques.

Science.gov (United States)

Hoffmann, Adrian; Waubert de Puiseau, Berenike; Schmidt, Alexander F; Musch, Jochen

2017-08-01

On surveys that assess sensitive personal attributes, indirect questioning aims at increasing respondents' willingness to answer truthfully by protecting confidentiality. However, the assumption that subjects understand questioning procedures fully and trust them to protect their privacy is rarely tested. In a scenario-based design, we compared four indirect questioning procedures in terms of their comprehensibility and perceived privacy protection. All indirect questioning techniques were found to be less comprehensible by respondents than a conventional direct question used for comparison. Less-educated respondents experienced more difficulties when confronted with any indirect questioning technique. Regardless of education, the crosswise model was found to be the most comprehensible among the four indirect methods. Indirect questioning in general was perceived to increase privacy protection in comparison to a direct question. Unexpectedly, comprehension and perceived privacy protection did not correlate. We recommend assessing these factors separately in future evaluations of indirect questioning.

Evaluation of rapid diagnostic test kits for feline leukemia virus infection using samples from naturally infected cats

Directory of Open Access Journals (Sweden)

Jiayou Liu

2016-09-01

Full Text Available Objectives Feline leukemia virus (FeLV is a potentially life-threatening oncogenic retrovirus. The p27 viral core protein is produced by the virus in infected feline cells, is found in the cytoplasm in several blood cells and can be free in the serum and plasma. ELISA or particle-based immunoassay are commonly used to detect the presence of the p27 core protein in samples obtained from blood. The objective of this study was to compare the performance of several in-clinic tests: the SNAP Feline Triple Test (IDEXX Laboratories, the WITNESS FeLV-FIV Test (Zoetis and the VetScan Feline FeLV/FIV Rapid Test (Abaxis. Methods The sample population (100 positive, 105 negative samples consisted of serum and plasma samples submitted to IDEXX’s worldwide reference laboratory for feline retrovirus testing. Virus isolation and reverse transcriptase PCR results were not available and so samples were judged to be positive or negative based on the results of the ViraCHEK FeLV (Zoetis microtiter plate assay. Results The percentage of samples positive and negative for FeLV p27 antigen using the three in-clinic tests compared with the ViraCHEK method were as follows: IDEXX Feline Triple (positive 98.0%, negative 100%; Zoetis WITNESS (positive 79.0%, negative 97.1%; Abaxis VetScan (positive 73.0%, negative 97.1%. Conclusions and relevance The SNAP Feline Triple Test demonstrated a high level of agreement for FeLV-positive and FeLV-negative samples when assessed in this model. Results of FeLV assays can vary among tests.

Evaluation of rapid diagnostic test kits for feline leukemia virus infection using samples from naturally infected cats.

Science.gov (United States)

Liu, Jiayou; O'Connor, Thomas; Beall, Melissa; Chandrashekar, Ramaswamy; Lappin, Michael

2016-01-01

Feline leukemia virus (FeLV) is a potentially life-threatening oncogenic retrovirus. The p27 viral core protein is produced by the virus in infected feline cells, is found in the cytoplasm in several blood cells and can be free in the serum and plasma. ELISA or particle-based immunoassay are commonly used to detect the presence of the p27 core protein in samples obtained from blood. The objective of this study was to compare the performance of several in-clinic tests: the SNAP Feline Triple Test (IDEXX Laboratories), the WITNESS FeLV-FIV Test (Zoetis) and the VetScan Feline FeLV/FIV Rapid Test (Abaxis). The sample population (100 positive, 105 negative samples) consisted of serum and plasma samples submitted to IDEXX's worldwide reference laboratory for feline retrovirus testing. Virus isolation and reverse transcriptase PCR results were not available and so samples were judged to be positive or negative based on the results of the ViraCHEK FeLV (Zoetis) microtiter plate assay. The percentage of samples positive and negative for FeLV p27 antigen using the three in-clinic tests compared with the ViraCHEK method were as follows: IDEXX Feline Triple (positive 98.0%, negative 100%); Zoetis WITNESS (positive 79.0%, negative 97.1%); Abaxis VetScan (positive 73.0%, negative 97.1%). The SNAP Feline Triple Test demonstrated a high level of agreement for FeLV-positive and FeLV-negative samples when assessed in this model. Results of FeLV assays can vary among tests.

Sample and injection manifolds used to in-place test of nuclear air-cleaning system

International Nuclear Information System (INIS)

Qiu Dangui; Li Xinzhi; Hou Jianrong; Qiao Taifei; Wu Tao; Zhang Jirong; Han Lihong

2012-01-01

Objective: According to the regulations of nuclear safety rules and related standards, in-place test of the nuclear air-cleaning systems should be carried out before and during operation of the nuclear facilities, which ensure them to be in good condition. In some special conditions, the use of sample and injection manifolds is required to make the test tracer and ventilating duct air fully mixed, so as to get the on-spot typical sample. Methods: This paper introduces the technology and application of the sample and injection manifolds in nuclear air-cleaning system. Results: Multi point injection and multi point sampling technology as an effective experimental method, has been used in a of domestic and international nuclear facilities. Conclusion: The technology solved the problem of uniformly of on-spot injection and sampling,which plays an important role in objectively evaluating the function of nuclear air-cleaning system. (authors)

Basic distribution free identification tests for small size samples of environmental data

Energy Technology Data Exchange (ETDEWEB)

Federico, A.G.; Musmeci, F. [ENEA, Centro Ricerche Casaccia, Rome (Italy). Dipt. Ambiente

1998-01-01

Testing two or more data sets for the hypothesis that they are sampled form the same population is often required in environmental data analysis. Typically the available samples have a small number of data and often then assumption of normal distributions is not realistic. On the other hand the diffusion of the days powerful Personal Computers opens new possible opportunities based on a massive use of the CPU resources. The paper reviews the problem introducing the feasibility of two non parametric approaches based on intrinsic equi probability properties of the data samples. The first one is based on a full re sampling while the second is based on a bootstrap approach. A easy to use program is presented. A case study is given based on the Chernobyl children contamination data. [Italiano] Nell`analisi di dati ambientali ricorre spesso il caso di dover sottoporre a test l`ipotesi di provenienza di due, o piu`, insiemi di dati dalla stessa popolazione. Tipicamente i dati disponibili sono pochi e spesso l`ipotesi di provenienza da distribuzioni normali non e` sostenibile. D`altra aprte la diffusione odierna di Personal Computer fornisce nuove possibili soluzioni basate sull`uso intensivo delle risorse della CPU. Il rapporto analizza il problema e presenta la possibilita` di utilizzo di due test non parametrici basati sulle proprieta` intrinseche di equiprobabilita` dei campioni. Il primo e` basato su una tecnica di ricampionamento esaustivo mentre il secondo su un approccio di tipo bootstrap. E` presentato un programma di semplice utilizzo e un caso di studio basato su dati di contaminazione di bambini a Chernobyl.

Robust non-parametric one-sample tests for the analysis of recurrent events.

Science.gov (United States)

Rebora, Paola; Galimberti, Stefania; Valsecchi, Maria Grazia

2010-12-30

One-sample non-parametric tests are proposed here for inference on recurring events. The focus is on the marginal mean function of events and the basis for inference is the standardized distance between the observed and the expected number of events under a specified reference rate. Different weights are considered in order to account for various types of alternative hypotheses on the mean function of the recurrent events process. A robust version and a stratified version of the test are also proposed. The performance of these tests was investigated through simulation studies under various underlying event generation processes, such as homogeneous and nonhomogeneous Poisson processes, autoregressive and renewal processes, with and without frailty effects. The robust versions of the test have been shown to be suitable in a wide variety of event generating processes. The motivating context is a study on gene therapy in a very rare immunodeficiency in children, where a major end-point is the recurrence of severe infections. Robust non-parametric one-sample tests for recurrent events can be useful to assess efficacy and especially safety in non-randomized studies or in epidemiological studies for comparison with a standard population. Copyright © 2010 John Wiley & Sons, Ltd.

Children’s questions as a base of teaching

Directory of Open Access Journals (Sweden)

Pavlović Branka S.

2003-01-01

Full Text Available The paper considers interrelationships between children’s questions and teaching and learning in the light of experimental studies on the role and aim of children’s questions in Nature and Society teaching in the third grade of primary school. The experiment comprising two parallel groups was carried out on the sample of 150 respondents from two primary schools in Šabac during the second term of the academic year 2002/2003. The present paper involves a portion of the results obtained for the type of questions children asked during teaching process as classified by independent observers; average distribution of some types of questions; qualitative analysis of discussions conducted with children after two classes where identical teaching content was presented in groups E and K; qualitative analysis of two interviews conducted with teachers after those classes in groups E and K; observers’ general impression of classes in groups E and K. The results showed that teaching based on children’s questions encourages children’s proactive attitude towards learning and leads to its higher cognitive efficiency and that children express a high degree of satisfaction by participating in thus organized work during classes and preference of atmosphere present in the classroom during such classes compared to the atmosphere during classes managed in a traditional way. Communication between children and between teacher and children is less formal, more relaxed and dynamic, which all produces motivational effects on children makes them more engaged in learning during teaching whose base is in their questions and not in teaching managed by teacher’s questions.

Cyberbullying and Suicide among a Sample of Lesbian, Gay, Bisexual, Transgender, and Questioning Young Adults

Science.gov (United States)

Schwickrath, Heather M.

2012-01-01

After an extensive literature review, results indicated research has been conducted examining the links between traditional bullying and suicide, lesbian, gay, bisexual, transgendered, and questioning (LGBTQ) identification and cyberbullying, as well as LGBTQ identification and suicide. However, it appears as though there is a dearth of studies…

Mechanical characteristics of historic mortars from tests on small-sample non-standard on small-sample non-standard specimens

Czech Academy of Sciences Publication Activity Database

Drdácký, Miloš; Slížková, Zuzana

2008-01-01

Roč. 17, č. 1 (2008), s. 20-29 ISSN 1407-7353 R&D Projects: GA ČR(CZ) GA103/06/1609 Institutional research plan: CEZ:AV0Z20710524 Keywords : small-sample non-standard testing * lime * historic mortar Subject RIV: AL - Art, Architecture, Cultural Heritage

Why Students Answer TIMSS Science Test Items the Way They Do

Science.gov (United States)

Harlow, Ann; Jones, Alister

2004-04-01

The purpose of this study was to explore how Year 8 students answered Third International Mathematics and Science Study (TIMSS) questions and whether the test questions represented the scientific understanding of these students. One hundred and seventy-seven students were tested using written test questions taken from the science test used in the Third International Mathematics and Science Study. The degree to which a sample of 38 children represented their understanding of the topics in a written test compared to the level of understanding that could be elicited by an interview is presented in this paper. In exploring student responses in the interview situation this study hoped to gain some insight into the science knowledge that students held and whether or not the test items had been able to elicit this knowledge successfully. We question the usefulness and quality of data from large-scale summative assessments on their own to represent student scientific understanding and conclude that large scale written test items, such as TIMSS, on their own are not a valid way of exploring students'' understanding of scientific concepts. Considerable caution is therefore needed in exploiting the outcomes of international achievement testing when considering educational policy changes or using TIMSS data on their own to represent student understanding.

Collecting Samples for Testing

Science.gov (United States)

... Creatinine Ratio Valproic Acid Vancomycin Vanillylmandelic Acid (VMA) VAP Vitamin A Vitamin B12 and Folate Vitamin D ... that used for CSF in that they require aspiration of a sample of the fluid through a ...

Practical Usage of Multiple-Choice Questions as Part of Learning and Self-Evaluation

Directory of Open Access Journals (Sweden)

Paula Kangasniemi

2016-12-01

Full Text Available The poster describes how the multiple-choice questions could be a part of learning, not only assessing. We often think of the role of questions only in order to test the student's skills. We have tested how questions could be a part of learning in our web-based course of information retrieval in Lapland University. In web-based learning there is a need for high-quality mediators. Mediators are learning promoters which trigger, support, and amplify learning. Mediators can be human mediators or tool mediators. The tool mediators are for example; tests, tutorials, guides and diaries. The multiple-choice questions can also be learning promoters which select, interpret and amplify objects for learning. What do you have to take into account when you are preparing multiple-choice questions as mediators? First you have to prioritize teaching objectives: what must be known and what should be known. According to our experience with contact learning, you can assess what the things are that students have problems with and need more guidance on. The most important addition to the questions is feedback during practice. The questions’ answers (wrong or right are not important. The feedback on the answers are important to guide students on how to search. The questions promote students’ self-regulation and self-evaluation. Feedback can be verbal, a screenshot or a video. We have added a verbal feedback for every question and also some screenshots and eight videos in our web-based course.

43 CFR 11.64 - Injury determination phase-testing and sampling methods.

Science.gov (United States)

2010-10-01

... Institute for Occupational Safety and Health, the American Society for Testing and Materials, and the American Public Health Association. (iii) Methods selected for air sampling and analysis shall be methods... stresses simulated; (B) How the model approximates the geohydrological framework of the assessment area; (C...

Analysis of fingerprint samples, testing various conditions, for forensic DNA identification.

Science.gov (United States)

Ostojic, Lana; Wurmbach, Elisa

2017-01-01

Fingerprints can be of tremendous value for forensic biology, since they can be collected from a wide variety of evident types, such as handles of weapons, tools collected in criminal cases, and objects with no apparent staining. DNA obtained from fingerprints varies greatly in quality and quantity, which ultimately affects the quality of the resulting STR profiles. Additional difficulties can arise when fingerprint samples show mixed STR profiles due to the handling of multiple persons. After applying a tested protocol for sample collection (swabbing with 5% Triton X-100), DNA extraction (using an enzyme that works at elevated temperatures), and PCR amplification (AmpFlSTR® Identifiler® using 31cycles) extensive analysis was performed to better understand the challenges inherent to fingerprint samples, with the ultimate goal of developing valuable profiles (≥50% complete). The impact of time on deposited fingerprints was investigated, revealing that while the quality of profiles deteriorated, full STR profiles could still be obtained from samples after 40days of storage at room temperature. By comparing the STR profiles from fingerprints of the dominant versus the non-dominant hand, we found a slightly better quality from the non-dominant hand, which was not always significant. Substrates seem to have greater effects on fingerprints. Tests on glass, plastic, paper and metal (US Quarter dollar, made of Cu and Ni), common substrates in offices and homes, showed best results for glass, followed by plastic and paper, while almost no profiles were obtained from a Quarter dollar. Important for forensic casework, we also assessed three-person mixtures of touched fingerprint samples. Unlike routinely used approaches for sampling evidence, the surface of an object (bottle) was sectioned into six equal parts and separate samples were taken from each section. The samples were processed separately for DNA extraction and STR amplification. The results included a few single

Location tests for biomarker studies: a comparison using simulations for the two-sample case.

Science.gov (United States)

Scheinhardt, M O; Ziegler, A

2013-01-01

Gene, protein, or metabolite expression levels are often non-normally distributed, heavy tailed and contain outliers. Standard statistical approaches may fail as location tests in this situation. In three Monte-Carlo simulation studies, we aimed at comparing the type I error levels and empirical power of standard location tests and three adaptive tests [O'Gorman, Can J Stat 1997; 25: 269 -279; Keselman et al., Brit J Math Stat Psychol 2007; 60: 267- 293; Szymczak et al., Stat Med 2013; 32: 524 - 537] for a wide range of distributions. We simulated two-sample scenarios using the g-and-k-distribution family to systematically vary tail length and skewness with identical and varying variability between groups. All tests kept the type I error level when groups did not vary in their variability. The standard non-parametric U-test performed well in all simulated scenarios. It was outperformed by the two non-parametric adaptive methods in case of heavy tails or large skewness. Most tests did not keep the type I error level for skewed data in the case of heterogeneous variances. The standard U-test was a powerful and robust location test for most of the simulated scenarios except for very heavy tailed or heavy skewed data, and it is thus to be recommended except for these cases. The non-parametric adaptive tests were powerful for both normal and non-normal distributions under sample variance homogeneity. But when sample variances differed, they did not keep the type I error level. The parametric adaptive test lacks power for skewed and heavy tailed distributions.

Proposed optical test of Bell's inequalities not resting upon the fair sampling assumption

International Nuclear Information System (INIS)

Santos, Emilio

2004-01-01

Arguments are given against the fair sampling assumption, used to claim an empirical disproof of local realism. New tests are proposed, able to discriminate between quantum mechanics and a restricted, but appealing, family of local hidden-variables models. Such tests require detectors with efficiencies just above 20%

Filtration and Leach Testing for PUREX Cladding Sludge and REDOX Cladding Sludge Actual Waste Sample Composites

Energy Technology Data Exchange (ETDEWEB)

Shimskey, Rick W.; Billing, Justin M.; Buck, Edgar C.; Casella, Amanda J.; Crum, Jarrod V.; Daniel, Richard C.; Draper, Kathryn E.; Edwards, Matthew K.; Hallen, Richard T.; Kozelisky, Anne E.; MacFarlan, Paul J.; Peterson, Reid A.; Swoboda, Robert G.

2009-03-02

A testing program evaluating actual tank waste was developed in response to Task 4 from the M-12 External Flowsheet Review Team (EFRT) issue response plan (Barnes and Voke 2006). The test program was subdivided into logical increments. The bulk water-insoluble solid wastes that are anticipated to be delivered to the Hanford Waste Treatment and Immobilization Plant (WTP) were identified according to type such that the actual waste testing could be targeted to the relevant categories. Under test plan TP RPP WTP 467 (Fiskum et al. 2007), eight broad waste groupings were defined. Samples available from the 222S archive were identified and obtained for testing. Under this test plan, a waste testing program was implemented that included: • Homogenizing the archive samples by group as defined in the test plan. • Characterizing the homogenized sample groups. • Performing parametric leaching testing on each group for compounds of interest. • Performing bench-top filtration/leaching tests in the hot cell for each group to simulate filtration and leaching activities if they occurred in the UFP2 vessel of the WTP Pretreatment Facility. This report focuses on a filtration/leaching test performed using two of the eight waste composite samples. The sample groups examined in this report were the plutonium-uranium extraction (PUREX) cladding waste sludge (Group 3, or CWP) and reduction-oxidation (REDOX) cladding waste sludge (Group 4, or CWR). Both the Group 3 and 4 waste composites were anticipated to be high in gibbsite, thus requiring caustic leaching. WTP RPT 167 (Snow et al. 2008) describes the homogenization, characterization, and parametric leaching activities before benchtop filtration/leaching testing of these two waste groups. Characterization and initial parametric data in that report were used to plan a single filtration/leaching test using a blend of both wastes. The test focused on filtration testing of the waste and caustic leaching for aluminum, in the form

A novel approach for small sample size family-based association studies: sequential tests.

Science.gov (United States)

Ilk, Ozlem; Rajabli, Farid; Dungul, Dilay Ciglidag; Ozdag, Hilal; Ilk, Hakki Gokhan

2011-08-01

In this paper, we propose a sequential probability ratio test (SPRT) to overcome the problem of limited samples in studies related to complex genetic diseases. The results of this novel approach are compared with the ones obtained from the traditional transmission disequilibrium test (TDT) on simulated data. Although TDT classifies single-nucleotide polymorphisms (SNPs) to only two groups (SNPs associated with the disease and the others), SPRT has the flexibility of assigning SNPs to a third group, that is, those for which we do not have enough evidence and should keep sampling. It is shown that SPRT results in smaller ratios of false positives and negatives, as well as better accuracy and sensitivity values for classifying SNPs when compared with TDT. By using SPRT, data with small sample size become usable for an accurate association analysis.

Finish-Kazakhstan cooperation on an aerosols sampling - testing of a new methods for nuclear monitoring improvement

International Nuclear Information System (INIS)

Tarvajnen, M.; Akhmetov, M.A.; Ptitskaya, L.D.; Osintsev, A.Yu.; Zhantikin, T.M.; Eligbaeva, G.

2001-01-01

The aerosols sampling is the powerful method of air radioactivity monitoring both the natural and artificial origin. Up to the today the IAEA does not engage of aerosols sampling study. To study of possibility of this method examination for radiation monitoring - the state authorities of Finland and the Republic of Kazakhstan - Department of Radiation and Nuclear Safety (Stuck) and Kazakhstan Atomic Energy Committee - jointly carried out the field tests in Kazakhstan. The test was began in the Kurchatov in April 2000 - at the desire of IAEA working team on Iraq - close to former Semipalatinsk test site and was ended in Astana in August of 2001. The main aim of the field test was study of possibility and appropriateness of concept and technology of aerosols sampling developed for the complete condition of environment. In the paper the role of participating sides in the field test and main results and conclusions are discussed as well. The gained experience will allow developing the method aerosols sampling for IAEA international safeguard measures strengthening application

The application of variable sampling method in the audit testing of insurance companies' premium income

Directory of Open Access Journals (Sweden)

Jovković Biljana

2012-12-01

Full Text Available The aim of this paper is to present the procedure of audit sampling using the variable sampling methods for conducting the tests of income from insurance premiums in insurance company 'Takovo'. Since the incomes from the insurance premiums from vehicle insurance and third-party vehicle insurance have the dominant share of the insurance company's income, the application of this method will be shown in the audit examination of these incomes - incomes from VI and TPVI premiums. For investigating the applicability of these methods in testing the income of other insurance companies, we shall implement the method of variable sampling in the audit testing of the premium income from the three leading insurance companies in Serbia, 'Dunav', 'DDOR' and 'Delta Generali' Insurance.

Daily self-sampling for high-risk human papillomavirus (HR-HPV) testing.

Science.gov (United States)

Sanner, Karin; Wikström, Ingrid; Gustavsson, Inger; Wilander, Erik; Lindberg, Julia Hedlund; Gyllensten, Ulf; Olovsson, Matts

2015-12-01

Self-sampling for HPV as part of primary screening is a well-tolerated method for women not attending organized Pap smear screening and could increase coverage of cervical cancer screening. To investigate if the prevalence of HR-HPV varies from day to day in infected women and if one single sample is reliable for detecting an ongoing infection. This is a prospective cohort study on 12 premenopausal and 13 postmenopausal women performing daily self-sampling for HR-HPV testing. They were all HR-HPV-positive 1-3 months ago. Postmenopausal women were sampled for 28 days and premenopausal women sampled during bleeding-free days in one menstrual cycle. A possible difference in viral load between the estrogen-dominated proliferative phase and the progesterone-dominated secretory phase was analyzed. Consistent results throughout the sampling period were observed for 19 women, with either a daily presence of HPV (14 women) or no HPV at all during the sampling period (5 women). Of 607 samples from 25 women, 596 were consistently positive or negative for HPV during the sampling period and 11 were inconsistent (2%). There was no difference in HPV copy number between the estrogen dominated proliferative or progesterone dominated secretory menstrual cycle phases. The major finding was a high degree of consistency concerning HR-HPV positivity and negativity of HR-HPV in vaginal fluid during a sustained period of daily self-sampling. It does not appear to matter whether the sample is collected in the proliferative or secretory phase. Copyright © 2015 Elsevier B.V. All rights reserved.

Comparison of integrated testlet and constructed-response question formats

Directory of Open Access Journals (Sweden)

Aaron D. Slepkov

2014-09-01

Full Text Available Constructed-response (CR questions are a mainstay of introductory physics textbooks and exams. However, because of the time, cost, and scoring reliability constraints associated with this format, CR questions are being increasingly replaced by multiple-choice (MC questions in formal exams. The integrated testlet (IT is a recently developed question structure designed to provide a proxy of the pedagogical advantages of CR questions while procedurally functioning as set of MC questions. ITs utilize an answer-until-correct response format that provides immediate confirmatory or corrective feedback, and they thus allow not only for the granting of partial credit in cases of initially incorrect reasoning, but, furthermore, the ability to build cumulative question structures. Here, we report on a study that directly compares the functionality of ITs and CR questions in introductory physics exams. To do this, CR questions were converted to concept-equivalent ITs, and both sets of questions were deployed in midterm and final exams. We find that both question types provide adequate discrimination between stronger and weaker students, with CR questions discriminating slightly better than the ITs. There is some indication that any difference in discriminatory power may result from the baseline score for guessing that is inherent in MC testing. Meanwhile, an analysis of interrater scoring of the CR questions raises serious concerns about the reliability of the granting of partial credit when this traditional assessment technique is used in a realistic (but nonoptimized setting. Furthermore, we show evidence that partial credit is granted in a valid manner in the ITs. Thus, together with consideration of the vastly reduced costs of administering IT-based examinations compared to CR-based examinations, our findings indicate that ITs are viable replacements for CR questions in formal examinations where it is desirable both to assess concept integration and to

Regulatory changes raise troubling questions for genomic testing.

Science.gov (United States)

Evans, Barbara J; Dorschner, Michael O; Burke, Wylie; Jarvik, Gail P

2014-11-01

By 6 October 2014, many laboratories in the United States must begin honoring new individual data access rights created by recent changes to federal privacy and laboratory regulations. These access rights are more expansive than has been widely understood and pose complex challenges for genomic testing laboratories. This article analyzes regulatory texts and guidances to explore which laboratories are affected. It offers the first published analysis of which parts of the vast trove of data generated during next-generation sequencing will be accessible to patients and research subjects. Persons tested at affected laboratories seemingly will have access, upon request, to uninterpreted gene variant information contained in their stored variant call format, binary alignment/map, and FASTQ files. A defect in the regulations will subject some non-CLIA-regulated research laboratories to these new access requirements unless the Department of Health and Human Services takes swift action to avert this apparently unintended consequence. More broadly, all affected laboratories face a long list of daunting operational, business, compliance, and bioethical issues as they adapt to this change and to the Food and Drug Administration's recently announced plan to publish draft guidance outlining a new oversight framework for lab-developed tests.

Acceptability of self-collected vaginal samples for HPV testing in an ...

African Journals Online (AJOL)

Objective: To evaluate the acceptability of self-collected vaginal samples for HPV testing in women living in rural and urban areas of Madagascar. Materials and methods: Participants were recruited in a health care center (urban group) and smaller affiliated dispensaries (rural group). They were invited to perform ...

Characterization, Leaching, and Filtration Testing for Tributyl Phosphate (TBP, Group 7) Actual Waste Sample Composites

Energy Technology Data Exchange (ETDEWEB)

Edwards, Matthew K.; Billing, Justin M.; Blanchard, David L.; Buck, Edgar C.; Casella, Amanda J.; Casella, Andrew M.; Crum, J. V.; Daniel, Richard C.; Draper, Kathryn E.; Fiskum, Sandra K.; Jagoda, Lynette K.; Jenson, Evan D.; Kozelisky, Anne E.; MacFarlan, Paul J.; Peterson, Reid A.; Shimskey, Rick W.; Snow, Lanee A.; Swoboda, Robert G.

2009-03-09

.A testing program evaluating actual tank waste was developed in response to Task 4 from the M-12 External Flowsheet Review Team (EFRT) issue response plan. The bulk water-insoluble solid wastes that are anticipated to be delivered to the Waste Treatment and Immobilization Plant (WTP) were identified according to type such that the actual waste testing could be targeted to the relevant categories. Eight broad waste groupings were defined. Samples available from the 222S archive were identified and obtained for testing. The actual waste-testing program included homogenizing the samples by group, characterizing the solids and aqueous phases, and performing parametric leaching tests. The tributyl phosphate sludge (TBP, Group 7) is the subject of this report. The Group 7 waste was anticipated to be high in phosphorus as well as aluminum in the form of gibbsite. Both are believed to exist in sufficient quantities in the Group 7 waste to address leaching behavior. Thus, the focus of the Group 7 testing was on the removal of both P and Al. The waste-type definition, archived sample conditions, homogenization activities, characterization (physical, chemical, radioisotope, and crystal habit), and caustic leaching behavior as functions of time, temperature, and hydroxide concentration are discussed in this report. Testing was conducted according to TP-RPP-WTP-467.

Power and Sample Size Calculations for Logistic Regression Tests for Differential Item Functioning

Science.gov (United States)

Li, Zhushan

2014-01-01

Logistic regression is a popular method for detecting uniform and nonuniform differential item functioning (DIF) effects. Theoretical formulas for the power and sample size calculations are derived for likelihood ratio tests and Wald tests based on the asymptotic distribution of the maximum likelihood estimators for the logistic regression model.…

Sample Size Calculation for Estimating or Testing a Nonzero Squared Multiple Correlation Coefficient

Science.gov (United States)

Krishnamoorthy, K.; Xia, Yanping

2008-01-01

The problems of hypothesis testing and interval estimation of the squared multiple correlation coefficient of a multivariate normal distribution are considered. It is shown that available one-sided tests are uniformly most powerful, and the one-sided confidence intervals are uniformly most accurate. An exact method of calculating sample size to…

Sample preparation of tank 241-C-106 grab samples and testing For compatibility with tank 241-AY-102 supernate

International Nuclear Information System (INIS)

Crawford, B.A.

1996-01-01

This test plan describes a sample separation method which will be used to obtain physical measurements and separated 241-C-106 solids and supernate fractions. In addition compatibility of tank 241-C-106 sludge with tank 241-AY-102 supernate will be determined

Beginning EFL Teachers' Beliefs about Quality Questions and Their Questioning Practices

Science.gov (United States)

Pham, Ly Ngoc Khanh; Hamid, M. Obaidul

2013-01-01

Motivated by the scarcity of research that examines the impact of teacher beliefs on their actual practices in Vietnam, this study investigated the relationship between teachers' beliefs about quality questions and their questioning behaviours in terms of questioning purposes, content focus, students' cognitive level, wording and syntax. Thirteen…

Examinations for radiologists. 1250 examination questions, with comments

International Nuclear Information System (INIS)

Albes, G.

2007-01-01

The first section presents self-tests and learning tips for a realistic assessment and optimisation of students' learning styles. Rhetoric and communicative competences are looked into, and hints are given on how to organize ones's documents. The second section contains more than 1250 examination questions from all fields of radiology, with which examination situations can be simulated for self-studies. The student is shown how to provide structured answers to complex questions, how to solve clinical problems step by step, how to assess facts, to develop key statements, etc. (orig.)

Teachers’ Perceptions of Bullying of Lesbian, Gay, Bisexual, Transgender, and Questioning (LGBTQ Students in a Southwestern Pennsylvania Sample

Directory of Open Access Journals (Sweden)

Jered B. Kolbert

2015-05-01

Full Text Available This study was designed to ascertain teachers’ perceptions of bullying of Lesbian, Gay, Bisexual, Transgender, and Questioning (LGBTQ youth. In a sample of 200 educators (61.0% female; 96.5% White from a county in southwestern Pennsylvania, there was a significant positive relationship between the teachers’ perceptions of the supportiveness of school staff towards students regardless of sexual orientation and those teachers’ reports of the frequency of bullying victimization experienced by LGBTQ students. Teachers’ perceptions of a higher level of staff and student support was associated with higher reported frequencies of students’ use of derogatory language about LGBTQ individuals and various types of bullying of LGBTQ students. Teachers with a lesbian, gay, or bisexual orientation were found to rate the school staff and students as significantly less supportive of students regardless of their sexual orientation, gender identity, or gender expression in comparison to heterosexual teachers. Finally, teachers who either were unaware of or believed that their school lacked an anti-bullying policy reported significantly higher rates of physical bullying victimization of LGBTQ students when compared to the rates observed by teachers who reported knowledge of their schools’ anti-bullying policies.

Teachers’ Perceptions of Bullying of Lesbian, Gay, Bisexual, Transgender, and Questioning (LGBTQ) Students in a Southwestern Pennsylvania Sample

Science.gov (United States)

Kolbert, Jered B.; Crothers, Laura M.; Bundick, Matthew J.; Wells, Daniel S.; Buzgon, Julie; Berbary, Cassandra; Simpson, Jordan; Senko, Katherine

2015-01-01

This study was designed to ascertain teachers’ perceptions of bullying of Lesbian, Gay, Bisexual, Transgender, and Questioning (LGBTQ) youth. In a sample of 200 educators (61.0% female; 96.5% White) from a county in southwestern Pennsylvania, there was a significant positive relationship between the teachers’ perceptions of the supportiveness of school staff towards students regardless of sexual orientation and those teachers’ reports of the frequency of bullying victimization experienced by LGBTQ students. Teachers’ perceptions of a higher level of staff and student support was associated with higher reported frequencies of students’ use of derogatory language about LGBTQ individuals and various types of bullying of LGBTQ students. Teachers with a lesbian, gay, or bisexual orientation were found to rate the school staff and students as significantly less supportive of students regardless of their sexual orientation, gender identity, or gender expression in comparison to heterosexual teachers. Finally, teachers who either were unaware of or believed that their school lacked an anti-bullying policy reported significantly higher rates of physical bullying victimization of LGBTQ students when compared to the rates observed by teachers who reported knowledge of their schools’ anti-bullying policies. PMID:26030341

Teachers' Perceptions of Bullying of Lesbian, Gay, Bisexual, Transgender, and Questioning (LGBTQ) Students in a Southwestern Pennsylvania Sample.

Science.gov (United States)

Kolbert, Jered B; Crothers, Laura M; Bundick, Matthew J; Wells, Daniel S; Buzgon, Julie; Berbary, Cassandra; Simpson, Jordan; Senko, Katherine

2015-05-28

This study was designed to ascertain teachers' perceptions of bullying of Lesbian, Gay, Bisexual, Transgender, and Questioning (LGBTQ) youth. In a sample of 200 educators (61.0% female; 96.5% White) from a county in southwestern Pennsylvania, there was a significant positive relationship between the teachers' perceptions of the supportiveness of school staff towards students regardless of sexual orientation and those teachers' reports of the frequency of bullying victimization experienced by LGBTQ students. Teachers' perceptions of a higher level of staff and student support was associated with higher reported frequencies of students' use of derogatory language about LGBTQ individuals and various types of bullying of LGBTQ students. Teachers with a lesbian, gay, or bisexual orientation were found to rate the school staff and students as significantly less supportive of students regardless of their sexual orientation, gender identity, or gender expression in comparison to heterosexual teachers. Finally, teachers who either were unaware of or believed that their school lacked an anti-bullying policy reported significantly higher rates of physical bullying victimization of LGBTQ students when compared to the rates observed by teachers who reported knowledge of their schools' anti-bullying policies.

Do older adults change their eyewitness reports when re-questioned?

Science.gov (United States)

Henkel, Linda A

2014-05-01

This study examined how older adults responded to different types of pressure to change their responses when questioned a second time about their memory for a crime. After watching a video of a crime and answering questions about remembered details, younger (18-22 years) and older adults (64-91 years) were either given negative feedback about their memory performance, were told that most people their age did poorly on the memory test (stereotype threat), or were simply asked to answer the questions again. This was done regardless of their actual accuracy, and the questions were then repeated. Results showed that both younger and older adults changed significantly more responses following negative feedback and changed more responses on misleading than on nonleading questions. Among older adults, as age increased, accuracy decreased and rate of response change increased. People were moderately confident overall about both their correct and incorrect responses. These results highlight the dangers of repeatedly questioning older witnesses with misleading questions and suggest that the responses that are changed may come to be remembered confidently-regardless of whether they are correct or incorrect.

Repetitive Questioning II

Directory of Open Access Journals (Sweden)

R. C. Hamdy MD

2018-02-01

Full Text Available Repetitive questioning is a major problem for caregivers, particularly taxing if they are unable to recognize and understand the reasons why their loved one keeps asking the same question over and over again. Caregivers may be tempted to believe that the patient does not even try to remember the answer given or is just getting obnoxious. This is incorrect. Repetitive questioning is due to the underlying disease: The patient’s short term memory is impaired and he is unable to register, encode, retain and retrieve the answer. If he is concerned about a particular topic, he will keep asking the same question over and over again. To the patient each time she asks the question, it is as if she asked it for the first time. Just answering repetitive questioning by providing repeatedly the same answer is not sufficient. Caregivers should try to identify the underlying cause for this repetitive questioning. In an earlier case study, the patient was concerned about her and her family’s safety and kept asking whether the doors are locked. In this present case study, the patient does not know how to handle the awkward situation he finds himself in. He just does not know what to do. He is not able to adjust to the new unexpected situation. So he repeatedly wants to reassure himself that he is not intruding by asking the same question over and over again. We discuss how the patient’s son-in-law could have avoided this situation and averted the catastrophic ending.

Mineralogic and petrologic investigation of pre-test core samples from the spent fuel test-climax

International Nuclear Information System (INIS)

Ryerson, F.J.; Qualheim, B.J.

1983-12-01

Pre-test samples obtained from just inside the perimeter of the canister emplacement holes of the Spent Fuel Test-Climax have been characterized by petrographic and microanalytical techniques. The primary quartz monzonite has undergone various degrees of hydrothermal alteration as a result of natural processes. Alteration is most apparent on primary plagioclase and biotite. The most common secondary phases on plagioclase are muscovite and calcite, while the most common secondary phases on biotite are epidote and chlorite. The major alteration zones encountered are localized along filled fractures, i.e. veins. The thickness and mineralogy of the alteration zones can be correlated with the vein mineralogy, becoming wider and more complex mineralogically when the veins contain calcite. 7 references, 10 figures, 4 tables

Does the sequence of data collection influence participants' responses to closed and open-ended questions? A methodological study.

Science.gov (United States)

Covell, Christine L; Sidani, Souraya; Ritchie, Judith A

2012-06-01

The sequence used for collecting quantitative and qualitative data in concurrent mixed-methods research may influence participants' responses. Empirical evidence is needed to determine if the order of data collection in concurrent mixed methods research biases participants' responses to closed and open-ended questions. To examine the influence of the quantitative-qualitative sequence on responses to closed and open-ended questions when assessing the same variables or aspects of a phenomenon simultaneously within the same study phase. A descriptive cross-sectional, concurrent mixed-methods design was used to collect quantitative (survey) and qualitative (interview) data. The setting was a large multi-site health care centre in Canada. A convenience sample of 50 registered nurses was selected and participated in the study. Participants were randomly assigned to one of two sequences for data collection, quantitative-qualitative or qualitative-quantitative. Independent t-tests were performed to compare the two groups' responses to the survey items. Directed content analysis was used to compare the participants' responses to the interview questions. The sequence of data collection did not greatly affect the participants' responses to the closed-ended questions (survey items) or the open-ended questions (interview questions). The sequencing of data collection, when using both survey and semi-structured interviews, may not bias participants' responses to closed or open-ended questions. Additional research is required to confirm these findings. Copyright © 2011 Elsevier Ltd. All rights reserved.

Beyond the Sponge Model: Encouraging Students' Questioning Skills in Abnormal Psychology.

Science.gov (United States)

Keeley, Stuart M.; Ali, Rahan; Gebing, Tracy

1998-01-01

Argues that educators should provide students with explicit training in asking critical questions. Describes a training strategy taught in abnormal psychology courses at Bowling Green State University (Ohio). Based on a pre- and post-test, results support the promise of using explicit questioning training in promoting the evaluative aspects of…

Testing the entrepreneurial intention model on a two-country sample

OpenAIRE

Liñán, Francisco; Chen, Yi-Wen

2006-01-01

This paper tests the Entrepreneurial Intention Model -which is adapted from the Theory of Planned Behavior- on a sample of 533 individuals from two quite different countries: one of them European (Spain) and the other South Asian (Taiwan). A newly developed Entrepreneurial Intention Questionnaire (EIQ) has being used which tries to overcome some of the limitations of previous instruments. Structural equations techniques were used in the empirical analysis. Results are generally...

The Investigation of Chemistry Questions Asked in Free Boarding and Scholarship Examination for High School Level in the Context of Algorithmic and Conceptual Question Type

Directory of Open Access Journals (Sweden)

Ayşegül DERMAN

2016-06-01

Full Text Available To conduct of the education programs, the most important resource is considered that textbooks but in national assesment tests, chemistry questions prepared according to chemistry curriculum they may be considered reflections of curriculum. The purpose of this study is to review the 140 chemistry questions “algoritmic or conceptual”, asked in “Free Boarding and Scholarship Examination”for 9,10,11 classes between 1998 and 2015 years. The study is a descriptive study. In data analysis, within the scope of the document analysis, qualitative research method was used. Crosstabs and Kappa statistic was used. The findings of this study revealed that the questions asked in “Free Boarding and Scholarship Examination”are 80% conceptual, 20% algorithmic in total. The distribution of question types according to the years indicates that most of questions are consisted of conceptual question types. By the findings are associated with the relevant literature and national chemistry curriculum, inferences and implications for conceptual chemistry teaching and learning have been made

Can Emergency Medicine Residents Reliably Use the Internet to Answer Clinical Questions?

Directory of Open Access Journals (Sweden)

June Abbas

2011-05-01

Full Text Available Introduction: The study objective was to determine the accuracy of answers to clinical questions by emergency medicine (EM residents conducting Internet searches by using Google. Emergency physicians commonly turn to outside resources to answer clinical questions that arise in the emergency department (ED. Internet access in the ED has supplanted textbooks for references because it is perceived as being more up to date. Although Google is the most widely used general Internet search engine, it is not medically oriented and merely provides links to other sources. Users must judge the reliability of the information obtained on the links. We frequently observed EM faculty and residents using Google rather than medicine-specific databases to seek answers to clinical questions. Methods: Two EM faculties developed a clinically oriented test for residents to take without the use of any outside aid. They were instructed to answer each question only if they were confident enough of their answer to implement it in a patient-care situation. Questions marked as unsure or answered incorrectly were used to construct a second test for each subject. On the second test, they were instructed to use Google as a resource to find links that contained answers. Results: Thirty-three residents participated. The means for the initial test were 32% correct, 28% incorrect, and 40% unsure. On the Google test, the mean for correct answers was 59%; 33% of answers were incorrect and 8% were unsure. Conclusion: EM residents’ ability to answer clinical questions correctly by using Web sites from Google searches was poor. More concerning was that unsure answers decreased, whereas incorrect answers increased. The Internet appears to have given the residents a false sense of security in their answers. Innovations, such as Internet access in the ED, should be studied carefully before being accepted as reliable tools for teaching clinical decision making. [West J Emerg Med. 2011

A note on Poisson goodness-of-fit tests for ionizing radiation induced chromosomal aberration samples.

Science.gov (United States)

Higueras, Manuel; González, J E; Di Giorgio, Marina; Barquinero, J F

2018-05-18

To present Poisson exact goodness-of-fit tests as alternatives and complements to the asymptotic u-test, which is the most widely used in cytogenetic biodosimetry, to decide whether a sample of chromosomal aberrations in blood cells comes from an homogeneous or inhomogeneous exposure. Three Poisson exact goodness-of-fit test from the literature are introduced and implemented in the R environment. A Shiny R Studio application, named GOF Poisson, has been updated for the purpose of giving support to this work. The three exact tests and the u-test are applied in chromosomal aberration data from clinical and accidental radiation exposure patients. It is observed how the u-test is not an appropriate approximation in small samples with small yield of chromosomal aberrations. Tools are provided to compute the three exact tests, which is not as trivial as the implementation of the u-test. Poisson exact goodness-of-fit tests should be considered jointly to the u-test for detecting inhomogeneous exposures in the cytogenetic biodosimetry practice.

The Paternal Landscape along the Bight of Benin - Testing Regional Representativeness of West-African Population Samples Using Y-Chromosomal Markers.

Directory of Open Access Journals (Sweden)

Maarten H D Larmuseau

Full Text Available Patterns of genetic variation in human populations across the African continent are still not well studied in comparison with Eurasia and America, despite the high genetic and cultural diversity among African populations. In population and forensic genetic studies a single sample is often used to represent a complete African region. In such a scenario, inappropriate sampling strategies and/or the use of local, isolated populations may bias interpretations and pose questions of representativeness at a macrogeographic-scale. The non-recombining region of the Y-chromosome (NRY has great potential to reveal the regional representation of a sample due to its powerful phylogeographic information content. An area poorly characterized for Y-chromosomal data is the West-African region along the Bight of Benin, despite its important history in the trans-Atlantic slave trade and its large number of ethnic groups, languages and lifestyles. In this study, Y-chromosomal haplotypes from four Beninese populations were determined and a global meta-analysis with available Y-SNP and Y-STR data from populations along the Bight of Benin and surrounding areas was performed. A thorough methodology was developed allowing comparison of population samples using Y-chromosomal lineage data based on different Y-SNP panels and phylogenies. Geographic proximity turned out to be the best predictor of genetic affinity between populations along the Bight of Benin. Nevertheless, based on Y-chromosomal data from the literature two population samples differed strongly from others from the same or neighbouring areas and are not regionally representative within large-scale studies. Furthermore, the analysis of the HapMap sample YRI of a Yoruban population from South-western Nigeria based on Y-SNPs and Y-STR data showed for the first time its regional representativeness, a result which is important for standard population and forensic genetic applications using the YRI sample

Formative student-authored question bank: perceptions, question quality and association with summative performance.

Science.gov (United States)

Walsh, Jason L; Harris, Benjamin H L; Denny, Paul; Smith, Phil

2018-02-01

There are few studies on the value of authoring questions as a study method, the quality of the questions produced by students and student perceptions of student-authored question banks. Here we evaluate PeerWise, a widely used and free online resource that allows students to author, answer and discuss multiple-choice questions. We introduced two undergraduate medical student cohorts to PeerWise (n=603). We looked at their patterns of PeerWise usage; identified associations between student engagement and summative exam performance; and used focus groups to assess student perceptions of the value of PeerWise for learning. We undertook item analysis to assess question difficulty and quality. Over two academic years, the two cohorts wrote 4671 questions, answered questions 606 658 times and posted 7735 comments. Question writing frequency correlated most strongly with summative performance (Spearman's rank: 0.24, p=<0.001). Student focus groups found that: (1) students valued curriculum specificity; and (2) students were concerned about student-authored question quality. Only two questions of the 300 'most-answered' questions analysed had an unacceptable discriminatory value (point-biserial correlation <0.2). Item analysis suggested acceptable question quality despite student concerns. Quantitative and qualitative methods indicated that PeerWise is a valuable study tool. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Basic distribution free identification tests for small size samples of environmental data

International Nuclear Information System (INIS)

Federico, A.G.; Musmeci, F.

1998-01-01

Testing two or more data sets for the hypothesis that they are sampled form the same population is often required in environmental data analysis. Typically the available samples have a small number of data and often then assumption of normal distributions is not realistic. On the other hand the diffusion of the days powerful Personal Computers opens new possible opportunities based on a massive use of the CPU resources. The paper reviews the problem introducing the feasibility of two non parametric approaches based on intrinsic equi probability properties of the data samples. The first one is based on a full re sampling while the second is based on a bootstrap approach. A easy to use program is presented. A case study is given based on the Chernobyl children contamination data [it

10 CFR Appendix B to Subpart K of... - Sampling Plan for Enforcement Testing

Science.gov (United States)

2010-01-01

... yields a 97.5 percent confidence level for a one-tailed t-test. Step 7. Compare the mean of the first sample (X 1) with the lower control limit (LCL1) to determine one of the following: (i) If the mean of... from Step 5. Compare the combined sample mean (X 2) to the lower control limit (LCL2) to find one of...

Nuclear questions

International Nuclear Information System (INIS)

Berg, Eugene

2012-01-01

Civilian and military nuclear questions fill a multitude of publications these days, especially after the Japanese tsunami and the Fukushima disaster. The author analyses some of them and highlights the links between civil and military nuclear industries, the realities of the nuclear cycle and related industrial questions before concluding on the controversial issue of weapons and their proliferation potential

Digitally Available Interval-Specific Rock-Sample Data Compiled from Historical Records, Nevada Test Site and Vicinity, Nye County, Nevada.

Energy Technology Data Exchange (ETDEWEB)

David B. Wood

2007-10-24

Between 1951 and 1992, 828 underground tests were conducted on the Nevada Test Site, Nye County, Nevada. Prior to and following these nuclear tests, holes were drilled and mined to collect rock samples. These samples are organized and stored by depth of borehole or drift at the U.S. Geological Survey Core Library and Data Center at Mercury, Nevada, on the Nevada Test Site. From these rock samples, rock properties were analyzed and interpreted and compiled into project files and in published reports that are maintained at the Core Library and at the U.S. Geological Survey office in Henderson, Nevada. These rock-sample data include lithologic descriptions, physical and mechanical properties, and fracture characteristics. Hydraulic properties also were compiled from holes completed in the water table. Rock samples are irreplaceable because pre-test, in-place conditions cannot be recreated and samples cannot be recollected from the many holes destroyed by testing. Documenting these data in a published report will ensure availability for future investigators.

Radioactive and electron microscope analysis of effluent monitor sample lines

International Nuclear Information System (INIS)

Kowalski, J.F.

1986-01-01

Effluent air sampling at nuclear power plant often leads to the question ''How representative is the sample of the effluent stream?'' Samples from radiation monitors are typically obtained at great distances from the sample nozzle because of high background concerns under postulated accidents. Sample line plateout during normal effluent sampling becomes the major concern. A US Nuclear Regulatory Commission inspection raised a concern that monitors were not collecting representative samples per ANSI standard N13.1. A comprehensive 2-yr study at Beaver Valley was performed during normal effluent releases in two phases: 1) weekly charcoal and glass fiber filter samples were analyzed for radioactivity for 6 months, and 2) nuclepore membrane filter samples were analyzed by electron microscope for 4- and 6-h periods. A specially designed test nozzle was directly inserted into an effluent stream for comparison with the radiation monitor samples. Particle behavior characteristics can be determined during effluent releases using a simple test probe. While particle plateout was the major purpose of the study, other particle behavior characteristics were evident and equally as important. Particle travel through long sample lines can also lead to (a) agglomeration or the coagulation of smaller particles to form larger ones, (b) particle splitting or fracturing upon impact with the sample line interior walls, and (c) resuspension of large particles in sample lines

Approaches to Exploring Category Information for Question Retrieval in Community Question-Answer Archives

DEFF Research Database (Denmark)

Cao, Xin; Cong, Gao; Cui, Bin

2012-01-01

, and it applies these approaches to existing question retrieval models, including a state-of-the-art question retrieval model. Experiments conducted on real CQA data demonstrate that the proposed techniques are effective and efficient and are capable of outperforming a variety of baseline methods significantly......Community Question Answering (CQA) is a popular type of service where users ask questions and where answers are obtained from other users or from historical question-answer pairs. CQA archives contain large volumes of questions organized into a hierarchy of categories. As an essential function...

Questioning ORACLE: An Assessment of ORACLE's Analysis of Teachers' Questions and [A Comment on "Questioning ORACLE"].

Science.gov (United States)

Scarth, John; And Others

1986-01-01

Analysis of teachers' questions, part of the ORACLE (Observation Research and Classroom Learning Evaluation) project research, is examined in detail. Scarth and Hammersley argue that the rules ORACLE uses for identifying different types of questions involve levels of ambiguity and inference that threaten reliability and validity of the study's…

CONFIDENCE LEVELS AND/VS. STATISTICAL HYPOTHESIS TESTING IN STATISTICAL ANALYSIS. CASE STUDY

Directory of Open Access Journals (Sweden)

ILEANA BRUDIU

2009-05-01

Full Text Available Estimated parameters with confidence intervals and testing statistical assumptions used in statistical analysis to obtain conclusions on research from a sample extracted from the population. Paper to the case study presented aims to highlight the importance of volume of sample taken in the study and how this reflects on the results obtained when using confidence intervals and testing for pregnant. If statistical testing hypotheses not only give an answer "yes" or "no" to some questions of statistical estimation using statistical confidence intervals provides more information than a test statistic, show high degree of uncertainty arising from small samples and findings build in the "marginally significant" or "almost significant (p very close to 0.05.

76 FR 69585 - Testing and Labeling Pertaining to Product Certification Regarding Representative Samples for...

Science.gov (United States)

2011-11-08

... 1107 Testing and Labeling Pertaining to Product Certification Regarding Representative Samples for... [CPSC Docket No. CPSC-2011-0082] Testing and Labeling Pertaining to Product Certification Regarding... to Product Certification.'' The proposed rule was intended to implement what was then known as...

Performance of an adult Brazilian sample on the Trail Making Test and Stroop Test

Directory of Open Access Journals (Sweden)

Kenia Repiso Campanholo

Full Text Available ABSTRACT Objective: The Trail Making Test (TMT and Stroop Test (ST are attention tests widely used in clinical practice and research. The aim of this study was to provide normative data for the adult Brazilian population and to study the influence of gender, age and education on the TMT parts A and B, and ST cards A, B and C. Methods: We recruited 1447 healthy subjects aged ≥18 years with an educational level of 0-25 years who were native speakers of Portuguese (Brazilian. The subjects were evaluated by the Matrix Reasoning and Vocabulary subtests of the Wechsler Adult Intelligence Scale-III, along with the TMTA, TMTB and ST A, B and C. Results: Among the participants, mean intellectual efficiency was 103.20 (SD: 12.0, age 41.0 (SD: 16.4 years and education 11.9 (SD: 5.6 years. There were significant differences between genders on the TMTA (p=0.002, TMTB (p=0.017 and STC (p=0.024. Age showed a positive correlation with all attention tests, whereas education showed a negative correlation. Gender was not found to be significant on the multiple linear regression model, but age and education maintained their interference. Conclusion: Gender did not have the major impact on attentional tasks observed for age and education, both of which should be considered in the stratification of normative samples.

Key Questions in Building Defect Prediction Models in Practice

Science.gov (United States)

Ramler, Rudolf; Wolfmaier, Klaus; Stauder, Erwin; Kossak, Felix; Natschläger, Thomas

The information about which modules of a future version of a software system are defect-prone is a valuable planning aid for quality managers and testers. Defect prediction promises to indicate these defect-prone modules. However, constructing effective defect prediction models in an industrial setting involves a number of key questions. In this paper we discuss ten key questions identified in context of establishing defect prediction in a large software development project. Seven consecutive versions of the software system have been used to construct and validate defect prediction models for system test planning. Furthermore, the paper presents initial empirical results from the studied project and, by this means, contributes answers to the identified questions.

Mind map our way into effective student questioning: A principle-based scenario

NARCIS (Netherlands)

Stokhof, Harry; De Vries, Bregje; Bastiaens, Theo; Martens, Rob

2017-01-01

Student questioning is an important self-regulative strategy and has multiple benefits for teaching and learning science. Teachers, however, need support to align student questioning to curricular goals. This study tests a prototype of a principle-based scenario that supports teachers in guiding

Reporting altered test results in hemolyzed samples: is the cure worse than the disease?

Science.gov (United States)

Lippi, Giuseppe; Cervellin, Gianfranco; Plebani, Mario

2017-07-26

The management of laboratory data in unsuitable (hemolyzed) samples remains an almost unresolved dilemma. Whether or not laboratory test results obtained by measuring unsuitable specimens should be made available to the clinicians has been the matter of fierce debates over the past decades. Recently, an intriguing alternative to suppressing test results and recollecting the specimen has been put forward, entailing the definition and implementation of specific algorithms that would finally allow reporting a preanalytically altered laboratory value within a specific comment about its uncertainty of measurement. This approach carries some advantages, namely the timely communication of potentially life-threatening laboratory values, but also some drawbacks. These especially include the challenging definition of validated performance specifications for hemolyzed samples, the need to producing reliable data with the lowest possible uncertainty, the short turnaround time for repeating most laboratory tests, the risk that the comments may be overlooked in short-stay and frequently overcrowded units (e.g. the emergency department), as well as the many clinical advantages of a direct communication with the physician in charge of the patient. Despite the debate remains open, we continue supporting the suggestion that suppressing data in unsuitable (hemolyzed) samples and promptly notifying the clinicians about the need to recollect the samples remains the most (clinically and analytically) safe practice.

Physics 30 Program Machine-Scorable Open-Ended Questions: Unit 2: Electric and Magnetic Forces. Diploma Examinations Program.

Science.gov (United States)

Alberta Dept. of Education, Edmonton.

This document outlines the use of machine-scorable open-ended questions for the evaluation of Physics 30 in Alberta. Contents include: (1) an introduction to the questions; (2) sample instruction sheet; (3) fifteen sample items; (4) item information including the key, difficulty, and source of each item; (5) solutions to items having multiple…

10 CFR Appendix A to Subpart U of... - Sampling Plan for Enforcement Testing of Electric Motors

Science.gov (United States)

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Sampling Plan for Enforcement Testing of Electric Motors A Appendix A to Subpart U of Part 431 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY... to Subpart U of Part 431—Sampling Plan for Enforcement Testing of Electric Motors Step 1. The first...

Feasibility of self-sampled dried blood spot and saliva samples sent by mail in a population-based study

International Nuclear Information System (INIS)

Sakhi, Amrit Kaur; Bastani, Nasser Ezzatkhah; Ellingjord-Dale, Merete; Gundersen, Thomas Erik; Blomhoff, Rune; Ursin, Giske

2015-01-01

In large epidemiological studies it is often challenging to obtain biological samples. Self-sampling by study participants using dried blood spots (DBS) technique has been suggested to overcome this challenge. DBS is a type of biosampling where blood samples are obtained by a finger-prick lancet, blotted and dried on filter paper. However, the feasibility and efficacy of collecting DBS samples from study participants in large-scale epidemiological studies is not known. The aim of the present study was to test the feasibility and response rate of collecting self-sampled DBS and saliva samples in a population–based study of women above 50 years of age. We determined response proportions, number of phone calls to the study center with questions about sampling, and quality of the DBS. We recruited women through a study conducted within the Norwegian Breast Cancer Screening Program. Invitations, instructions and materials were sent to 4,597 women. The data collection took place over a 3 month period in the spring of 2009. Response proportions for the collection of DBS and saliva samples were 71.0% (3,263) and 70.9% (3,258), respectively. We received 312 phone calls (7% of the 4,597 women) with questions regarding sampling. Of the 3,263 individuals that returned DBS cards, 3,038 (93.1%) had been packaged and shipped according to instructions. A total of 3,032 DBS samples were sufficient for at least one biomarker analysis (i.e. 92.9% of DBS samples received by the laboratory). 2,418 (74.1%) of the DBS cards received by the laboratory were filled with blood according to the instructions (i.e. 10 completely filled spots with up to 7 punches per spot for up to 70 separate analyses). To assess the quality of the samples, we selected and measured two biomarkers (carotenoids and vitamin D). The biomarker levels were consistent with previous reports. Collecting self-sampled DBS and saliva samples through the postal services provides a low cost, effective and feasible

Testing the entrepreneurial intention model on a two-country sample

OpenAIRE

Liñán, Francisco

2006-01-01

This paper tests the Entrepreneurial Intention Model -which is adapted from the Theory of Planned Behavior- on a sample of 533 individuals from two quite different countries: one of them European (Spain) and the other South Asian (Taiwan). A newly developed Entrepreneurial Intention Questionnaire (EIQ) has being used which tries to overcome some of the limitations of previous instruments. Structural equations techniques were used in the empirical analysis. Results are generally satisfactory, ...

Cone penetrometer tests and HydroPunch sampling: A screening technique for plume definition

International Nuclear Information System (INIS)

Smolley, M.; Kappmeyer, J.C.

1991-01-01

Cone penetrometer tests and HydroPunch sampling were used to define the extent of volatile organic compounds in ground water. The investigation indicated that the combination of the these techniques is effective for obtaining ground water samples for preliminary plume definition. HydroPunch samples can be collected in unconsolidated sediments and the analytical results obtained from these samples are comparable to those obtained from adjacent monitoring wells. This sampling method is a rapid and cost-effective screening technique for characterizing the extent of contaminant plumes in soft sediment environments. Use of this screening technique allowed monitoring wells to be located at the plume boundary, thereby reducing the number of wells installed and the overall cost of the plume definition program

Self-Sampling for Human Papillomavirus Testing: Increased Cervical Cancer Screening Participation and Incorporation in International Screening Programs

Science.gov (United States)

Gupta, Sarah; Palmer, Christina; Bik, Elisabeth M.; Cardenas, Juan P.; Nuñez, Harold; Kraal, Laurens; Bird, Sara W.; Bowers, Jennie; Smith, Alison; Walton, Nathaniel A.; Goddard, Audrey D.; Almonacid, Daniel E.; Zneimer, Susan; Richman, Jessica; Apte, Zachary S.

2018-01-01

In most industrialized countries, screening programs for cervical cancer have shifted from cytology (Pap smear or ThinPrep) alone on clinician-obtained samples to the addition of screening for human papillomavirus (HPV), its main causative agent. For HPV testing, self-sampling instead of clinician-sampling has proven to be equally accurate, in particular for assays that use nucleic acid amplification techniques. In addition, HPV testing of self-collected samples in combination with a follow-up Pap smear in case of a positive result is more effective in detecting precancerous lesions than a Pap smear alone. Self-sampling for HPV testing has already been adopted by some countries, while others have started trials to evaluate its incorporation into national cervical cancer screening programs. Self-sampling may result in more individuals willing to participate in cervical cancer screening, because it removes many of the barriers that prevent women, especially those in low socioeconomic and minority populations, from participating in regular screening programs. Several studies have shown that the majority of women who have been underscreened but who tested HPV-positive in a self-obtained sample will visit a clinic for follow-up diagnosis and management. In addition, a self-collected sample can also be used for vaginal microbiome analysis, which can provide additional information about HPV infection persistence as well as vaginal health in general. PMID:29686981

Feasibility tests of a high resolution sampling radial drift chamber

International Nuclear Information System (INIS)

Huth, J.

1985-01-01

The design concept and results of feasibility tests for a vertex detector intended for use in the TPC-PEP4/9 experiment are presented. The detector is based on a slow radial drift in dimethyl ether. High resolution localization of the avalanches at the sense wire is accomplished with nearby pickup wires and the utilization of waveform sampling electronics. The avalanche angular coordinate measurements, combined with knowledge of the electric field distribution and drift velocity permit reconstruction of the trajectory using essentially all track information. Measurements with a test chamber constructed to study characteristics of avalanche localization indicate that the recoverable track information in one centimeter of dimethyl ether at 1.5 atm is equivalent to 30 measurements of 40 μm accuracy. (orig.)

Falsification Testing of Instrumental Variables Methods for Comparative Effectiveness Research.

Science.gov (United States)

Pizer, Steven D

2016-04-01

To demonstrate how falsification tests can be used to evaluate instrumental variables methods applicable to a wide variety of comparative effectiveness research questions. Brief conceptual review of instrumental variables and falsification testing principles and techniques accompanied by an empirical application. Sample STATA code related to the empirical application is provided in the Appendix. Comparative long-term risks of sulfonylureas and thiazolidinediones for management of type 2 diabetes. Outcomes include mortality and hospitalization for an ambulatory care-sensitive condition. Prescribing pattern variations are used as instrumental variables. Falsification testing is an easily computed and powerful way to evaluate the validity of the key assumption underlying instrumental variables analysis. If falsification tests are used, instrumental variables techniques can help answer a multitude of important clinical questions. © Health Research and Educational Trust.

Curiosity Questions

Science.gov (United States)

Nelsen, Jane; DeLorenzo, Chip

2010-01-01

Have you ever found yourself lecturing a child, with the best of intentions, in an attempt to help him or her learn a lesson or process a situation in a manner that you feel will be productive? Curiosity questions, which the authors also call What and How questions, help children process an experience, event, or natural consequence so that they…

Critical tests for determination of microbiological quality and biological activity in commercial vermicompost samples of different origins.

Science.gov (United States)

Grantina-Ievina, Lelde; Andersone, Una; Berkolde-Pīre, Dace; Nikolajeva, Vizma; Ievinsh, Gederts

2013-12-01

The aim of the present paper was to show that differences in biological activity among commercially produced vermicompost samples can be found by using a relatively simple test system consisting of microorganism tests on six microbiological media and soilless seedling growth tests with four vegetable crop species. Significant differences in biological properties among analyzed samples were evident both at the level of microbial load as well as plant growth-affecting activity. These differences were mostly manufacturer- and feedstock-associated, but also resulted from storage conditions of vermicompost samples. A mature vermicompost sample that was produced from sewage sludge still contained considerable number of Escherichia coli. Samples from all producers contained several potentially pathogenic fungal species such as Aspergillus fumigatus, Pseudallescheria boidii, Pseudallescheria fimeti, Pseudallescheria minutispora, Scedosporium apiospermum, Scedosporium prolificans, Scopulariopsis brevicaulis, Stachybotrys chartarum, Geotrichum spp., Aphanoascus terreus, and Doratomyces columnaris. In addition, samples from all producers contained plant growth-promoting fungi from the genera Trichoderma and Mortierella. The described system can be useful both for functional studies aiming at understanding of factors affecting quality characteristics of vermicompost preparations and for routine testing of microbiological quality and biological activity of organic waste-derived composts and vermicomposts.

Pigeons exhibit higher accuracy for chosen memory tests than for forced memory tests in duration matching-to-sample.

Science.gov (United States)

Adams, Allison; Santi, Angelo

2011-03-01

Following training to match 2- and 8-sec durations of feederlight to red and green comparisons with a 0-sec baseline delay, pigeons were allowed to choose to take a memory test or to escape the memory test. The effects of sample omission, increases in retention interval, and variation in trial spacing on selection of the escape option and accuracy were studied. During initial testing, escaping the test did not increase as the task became more difficult, and there was no difference in accuracy between chosen and forced memory tests. However, with extended training, accuracy for chosen tests was significantly greater than for forced tests. In addition, two pigeons exhibited higher accuracy on chosen tests than on forced tests at the short retention interval and greater escape rates at the long retention interval. These results have not been obtained in previous studies with pigeons when the choice to take the test or to escape the test is given before test stimuli are presented. It appears that task-specific methodological factors may determine whether a particular species will exhibit the two behavioral effects that were initially proposed as potentially indicative of metacognition.

Small Sample Properties of the Wilcoxon Signed Rank Test with Discontinuous and Dependent Observations

OpenAIRE

Nadine Chlass; Jens J. Krueger

2007-01-01

This Monte-Carlo study investigates sensitivity of the Wilcoxon signed rank test to certain assumption violations in small samples. Emphasis is put on within-sample-dependence, between-sample dependence, and the presence of ties. Our results show that both assumption violations induce severe size distortions and entail power losses. Surprisingly, these consequences do vary substantially with other properties the data may display. Results provided are particularly relevant for experimental set...

Evaluation of ELISA screening test for detecting aflatoxin in biogenic dust samples

Energy Technology Data Exchange (ETDEWEB)

Durant, J.T.

1996-05-01

Aflatoxin is a carcinogenic chemical that is sometimes produced when agricultural commodities are infested by the fungi Aspergillus flavus and A. Parasiticus. Aflatoxin has been found to be present in air samples taken around persons handling materials likely to be contaminated. The purpose of this investigation was to demonstrate the feasibility of using an Enzyme Linked Immunosorbent Assay (ELISA) test kit that was developed to screen for aflatoxin in bulk agricultural commodities, to an air sample. Samples were taken from two environments likely to be contaminated with aflatoxin, a dairy farm feed mixing operation and a peanut bagging operation. The dust collected from these environments was considered to be biogenic, in that it originated primarily from biological materials.

Methodic aspects of autoclave tests of compact samples on cyclic crack resistance

International Nuclear Information System (INIS)

Pokhmurskij, V.I.; Gnyp, I.P.; Popov, A.A.; Tarasyuk, G.P.; Dutsyak, I.Z.; Timonin, V.M.

1984-01-01

Laboratory autoclave LAKIM-25 was created for investigation of cyclic and static crack resistance of vessel materials of power plants under the conditions close to operation ones. It enables to investigate the cyclic crack resistance of standard samples of up to 25 mm thickness in water at 623 K and 18 MPa. The friction force changes during tests from 6.1 up to 6.4 kN, therefore it is necessary to correct regularly the force of sample loading, recording the s-n diagram on a drum of UMEh-10TM plant. The periodic record of loading diagram coincides with respect to time with the necessity of controlling the change of sample pliability during crack propagation

Digitally Available Interval-Specific Rock-Sample Data Compiled from Historical Records, Nevada Test Site and Vicinity, Nye County, Nevada

Energy Technology Data Exchange (ETDEWEB)

David B. Wood

2009-10-08

Between 1951 and 1992, underground nuclear weapons testing was conducted at 828 sites on the Nevada Test Site, Nye County, Nevada. Prior to and following these nuclear tests, holes were drilled and mined to collect rock samples. These samples are organized and stored by depth of borehole or drift at the U.S. Geological Survey Core Library and Data Center at Mercury, Nevada, on the Nevada Test Site. From these rock samples, rock properties were analyzed and interpreted and compiled into project files and in published reports that are maintained at the Core Library and at the U.S. Geological Survey office in Henderson, Nevada. These rock-sample data include lithologic descriptions, physical and mechanical properties, and fracture characteristics. Hydraulic properties also were compiled from holes completed in the water table. Rock samples are irreplaceable because pre-test, in-place conditions cannot be recreated and samples cannot be recollected from the many holes destroyed by testing. Documenting these data in a published report will ensure availability for future investigators.

Student certainty answering misconception question: study of Three-Tier Multiple-Choice Diagnostic Test in Acid-Base and Solubility Equilibrium

Science.gov (United States)

Ardiansah; Masykuri, M.; Rahardjo, S. B.

2018-04-01

Students’ concept comprehension in three-tier multiple-choice diagnostic test related to student confidence level. The confidence level related to certainty and student’s self-efficacy. The purpose of this research was to find out students’ certainty in misconception test. This research was quantitative-qualitative research method counting students’ confidence level. The research participants were 484 students that were studying acid-base and equilibrium solubility subject. Data was collected using three-tier multiple-choice (3TMC) with thirty questions and students’ questionnaire. The findings showed that #6 item gives the highest misconception percentage and high student confidence about the counting of ultra-dilute solution’s pH. Other findings were that 1) the student tendency chosen the misconception answer is to increase over item number, 2) student certainty decreased in terms of answering the 3TMC, and 3) student self-efficacy and achievement were related each other in the research. The findings suggest some implications and limitations for further research.

THE EXPLICIT COMPREHENSION-STRATEGY INSTRUCTION: QUESTION-ANSWER RELATIONSHIP VS SELF-QUESTIONING

Directory of Open Access Journals (Sweden)

Lalu Thohir

2017-12-01

Full Text Available This study was aimed at examining and comparing the effectiveness of the Question-Answer Relationship (QAR and Self-Questioning (SQ strategies in improving the reading ability of the undergraduate students. This study was a quasi-experimental study in which two out of three classes of the third semester students at English department of Mataram University were selected randomly to receive either QAR strategy or SQ strategy instructions for ten weekly meetings. The findings of pre- and posttest with multiple-choice questions revealed that both comprehension strategies were effective in improving the undergraduate students‘ reading ability. The findings from the posttest with multiple-choice questions indicated the students who received SQ strategy instruction scored significantly higher than those students who received QAR strategy instruction. On the other hand, the students who received QAR strategy instruction scored slightly higher than those students who received SQ strategy instruction in the posttest with open-ended questions.

40 CFR 80.582 - What are the sampling and testing methods for the fuel marker?

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false What are the sampling and testing... commercially available diesel fuel which meets the applicable industry consensus and federal regulatory...) Qualification of test methods approved by voluntary consensus-based standards bodies. Any standard test method...

The Effects of Test Length and Sample Size on Item Parameters in Item Response Theory

Science.gov (United States)

Sahin, Alper; Anil, Duygu

2017-01-01

This study investigates the effects of sample size and test length on item-parameter estimation in test development utilizing three unidimensional dichotomous models of item response theory (IRT). For this purpose, a real language test comprised of 50 items was administered to 6,288 students. Data from this test was used to obtain data sets of…

Resolving Questioned Paternity Issues Using a Philippine Genetic Database

Directory of Open Access Journals (Sweden)

Maria Corazon De Ungria

2002-06-01

Full Text Available The utility of the Philippines genetic database consisting of seven Short Tandem Repeat (STR markers for testing of ten questioned paternity cases was investigated. The markers used were HUMvWA, HUMTH01, HUMCSF1PO, HUMFOLP23, D8S306, HUMFES/FPS, and HUMF13A01. These markers had a combined Power of Paternity Exclusion of 99.17%. Due to the gravity of some cases handled in the laboratory, routine procedures must be assessed to determine the capacity of the analysis to exclude a non-father of predict paternity. Clients showed a preference for only testing father and child to lower costs and reduce conflicts, particularly when the mother objects to the conduct of DNA tests, or when she is deceased or cannot be located. The Probability of Paternity was calculated with and without the mother’s profile in each of the cases. In all instances, results were more informative when the mother’s DNA profile was included. Moreover, variations in the allelic distribution of five STR markers among eight Caucasian, one African-American, and two Amerindian (Argentina populations resulted in significant differences in Probability of Paternity estimates compared to those calculated using the Philippine Database.Based on the results of the present study, it is recommended that tests on alleged father-child samples be performed to screen for at least two mismatches. In the absence of theses mismatches, further analysis that includes the mother’s DNA profile is recommended. Moreover, it is recommended that a Philippines genetic database be used for DNA-based paternity testing in the Philippines.

Relationships between narrative language samples and norm-referenced test scores in language assessments of school-age children.

Science.gov (United States)

Danahy Ebert, Kerry; Scott, Cheryl M

2014-10-01

Both narrative language samples and norm-referenced language tests can be important components of language assessment for school-age children. The present study explored the relationship between these 2 tools within a group of children referred for language assessment. The study is a retrospective analysis of clinical records from 73 school-age children. Participants had completed an oral narrative language sample and at least one norm-referenced language test. Correlations between microstructural language sample measures and norm-referenced test scores were compared for younger (6- to 8-year-old) and older (9- to 12-year-old) children. Contingency tables were constructed to compare the 2 types of tools, at 2 different cutpoints, in terms of which children were identified as having a language disorder. Correlations between narrative language sample measures and norm-referenced tests were stronger for the younger group than the older group. Within the younger group, the level of language assessed by each measure contributed to associations among measures. Contingency analyses revealed moderate overlap in the children identified by each tool, with agreement affected by the cutpoint used. Narrative language samples may complement norm-referenced tests well, but age combined with narrative task can be expected to influence the nature of the relationship.

Victoria Symptom Validity Test performance in children and adolescents with neurological disorders.

Science.gov (United States)

Brooks, Brian L

2012-12-01

It is becoming increasingly more important to study, use, and promote the utility of measures that are designed to detect non-compliance with testing (i.e., poor effort, symptom non-validity, response bias) as part of neuropsychological assessments with children and adolescents. Several measures have evidence for use in pediatrics, but there is a paucity of published support for the Victoria Symptom Validity Test (VSVT) in this population. The purpose of this study was to examine the performance on the VSVT in a sample of pediatric patients with known neurological disorders. The sample consisted of 100 consecutively referred children and adolescents between the ages of 6 and 19 years (mean = 14.0, SD = 3.1) with various neurological diagnoses. On the VSVT total items, 95% of the sample had performance in the "valid" range, with 5% being deemed "questionable" and 0% deemed "invalid". On easy items, 97% were "valid", 2% were "questionable", and 1% was "invalid." For difficult items, 84% were "valid," 16% were "questionable," and 0% was "invalid." For those patients given two effort measures (i.e., VSVT and Test of Memory Malingering; n = 65), none was identified as having poor test-taking compliance on both measures. VSVT scores were significantly correlated with age, intelligence, processing speed, and functional ratings of daily abilities (attention, executive functioning, and adaptive functioning), but not objective performance on the measure of sustained attention, verbal memory, or visual memory. The VSVT has potential to be used in neuropsychological assessments with pediatric patients.

Self-directed questions to improve students' ability in solving chemical problems

Science.gov (United States)

Sanjaya, Rahmat Eko; Muna, Khairiatul; Suharto, Bambang; Syahmani

2017-12-01

Students' ability in solving chemical problems is seen from their ability to solve chemicals' non-routine problems. It is due to learning faced directly on non-routine problems will generate a meaningful learning for students. Observations in Banjarmasin Public High School 1 (SMA Negeri 1 Banjarmasin) showed that students did not give the expected results when they were given the non-routine problems. Learning activities by emphasizing problem solving was implemented based on the existence of knowledge about cognition and regulation of cognition. Both of these elements are components of metacognition. The self-directed question is a strategy that involves metacognition in solving chemical problems. This research was carried out using classroom action research design in two cycles. Each cycle consists of four stages: planning, action, observation and reflection. The subjects were 34 students of grade XI-4 at majoring science (IPA) of SMA Negeri 1 Banjarmasin. The data were collected using tests of the students' ability in problem solving and non-tests instrument to know the process of implementation of the actions. Data were analyzed with descriptivequantitativeand qualitative analysis. The ability of students in solving chemical problems has increased from an average of 37.96 in cycle I became 61.83 in cycle II. Students' ability to solve chemical problems is viewed based on their ability to answer self-directed questions. Students' ability in comprehension questions increased from 73.04 in the cycle I became 96.32 in cycle II. Connection and strategic questions increased from 54.17 and 16.50 on cycle I became 63.73 and 55.23 on cycle II respectively. In cycle I, reflection questions were 26.96 and elevated into 36.27 in cycle II. The self-directed questions have the ability to help students to solve chemical problems through metacognition questions. Those questions guide students to find solutions in solving chemical problems.

Sensitivity and specificity of normality tests and consequences on reference interval accuracy at small sample size: a computer-simulation study.

Science.gov (United States)

Le Boedec, Kevin

2016-12-01

According to international guidelines, parametric methods must be chosen for RI construction when the sample size is small and the distribution is Gaussian. However, normality tests may not be accurate at small sample size. The purpose of the study was to evaluate normality test performance to properly identify samples extracted from a Gaussian population at small sample sizes, and assess the consequences on RI accuracy of applying parametric methods to samples that falsely identified the parent population as Gaussian. Samples of n = 60 and n = 30 values were randomly selected 100 times from simulated Gaussian, lognormal, and asymmetric populations of 10,000 values. The sensitivity and specificity of 4 normality tests were compared. Reference intervals were calculated using 6 different statistical methods from samples that falsely identified the parent population as Gaussian, and their accuracy was compared. Shapiro-Wilk and D'Agostino-Pearson tests were the best performing normality tests. However, their specificity was poor at sample size n = 30 (specificity for P Box-Cox transformation) on all samples regardless of their distribution or adjusting, the significance level of normality tests depending on sample size would limit the risk of constructing inaccurate RI. © 2016 American Society for Veterinary Clinical Pathology.

The impact of two multiple-choice question formats on the problem-solving strategies used by novices and experts.

Science.gov (United States)

Coderre, Sylvain P; Harasym, Peter; Mandin, Henry; Fick, Gordon

2004-11-05

Pencil-and-paper examination formats, and specifically the standard, five-option multiple-choice question, have often been questioned as a means for assessing higher-order clinical reasoning or problem solving. This study firstly investigated whether two paper formats with differing number of alternatives (standard five-option and extended-matching questions) can test problem-solving abilities. Secondly, the impact of the alternatives number on psychometrics and problem-solving strategies was examined. Think-aloud protocols were collected to determine the problem-solving strategy used by experts and non-experts in answering Gastroenterology questions, across the two pencil-and-paper formats. The two formats demonstrated equal ability in testing problem-solving abilities, while the number of alternatives did not significantly impact psychometrics or problem-solving strategies utilized. These results support the notion that well-constructed multiple-choice questions can in fact test higher order clinical reasoning. Furthermore, it can be concluded that in testing clinical reasoning, the question stem, or content, remains more important than the number of alternatives.

Mind Map Our Way into Effective Student Questioning: a Principle-Based Scenario

Science.gov (United States)

Stokhof, Harry; de Vries, Bregje; Bastiaens, Theo; Martens, Rob

2017-07-01

Student questioning is an important self-regulative strategy and has multiple benefits for teaching and learning science. Teachers, however, need support to align student questioning to curricular goals. This study tests a prototype of a principle-based scenario that supports teachers in guiding effective student questioning. In the scenario, mind mapping is used to provide both curricular structure as well as support for student questioning. The fidelity of structure and the process of implementation were verified by interviews, video data and a product collection. Results show that the scenario was relevant for teachers, practical in use and effective for guiding student questioning. Results also suggest that shared responsibility for classroom mind maps contributed to more intensive collective knowledge construction.

Evaluation of a low-cost liquid-based Pap test in rural El Salvador: a split-sample study.

Science.gov (United States)

Guo, Jin; Cremer, Miriam; Maza, Mauricio; Alfaro, Karla; Felix, Juan C

2014-04-01

We sought to test the diagnostic efficacy of a low-cost, liquid-based cervical cytology that could be implemented in low-resource settings. A prospective, split-sample Pap study was performed in 595 women attending a cervical cancer screening clinic in rural El Salvador. Collected cervical samples were used to make a conventional Pap (cell sample directly to glass slide), whereas residual material was used to make the liquid-based sample using the ClearPrep method. Selected samples were tested from the residual sample of the liquid-based collection for the presence of high-risk Human papillomaviruses. Of 595 patients, 570 were interpreted with the same diagnosis between the 2 methods (95.8% agreement). There were comparable numbers of unsatisfactory cases; however, ClearPrep significantly increased detection of low-grade squamous intraepithelial lesions and decreased the diagnoses of atypical squamous cells of undetermined significance. ClearPrep identified an equivalent number of high-grade squamous intraepithelial lesion cases as the conventional Pap. High-risk human papillomavirus was identified in all cases of high-grade squamous intraepithelial lesion, adenocarcinoma in situ, and cancer as well as in 78% of low-grade squamous intraepithelial lesions out of the residual fluid of the ClearPrep vials. The low-cost ClearPrep Pap test demonstrated equivalent detection of squamous intraepithelial lesions when compared with the conventional Pap smear and demonstrated the potential for ancillary molecular testing. The test seems a viable option for implementation in low-resource settings.

Post-event information presented in a question form eliminates the misinformation effect.

Science.gov (United States)

Lee, Yuh-shiow; Chen, Kuan-Nan

2013-02-01

This study investigated the influences of sentence surface forms on the misinformation effect. After viewing a film clip, participants received a post-event narrative describing the events in the film. Critical sentences in the post-event narrative, presented in either a statement or a question form, contained misinformation instead of questions with embedded false presuppositions; thus participants did not have to answer questions about the original event. During the final cued-recall test, participants were informed that any relevant information presented in the post-event narrative was not in the original event and that they should not report it. Consistent with previous findings, Experiment 1 demonstrated that post-event information presented as an affirmative statement produced the misinformation effect. More importantly, post-event information presented in a question form, regardless of whether it contained a misleading or studied item, increased the recall of correct information and reduced false recall. Experiment 2 replicated the main finding and ruled out an alternative explanation based on the salience of misleading items. Post-event information presented in a question form created a condition similar to that which produces the testing effect. © 2012 The British Psychological Society.

Predicting self-reported research misconduct and questionable research practices in university students using an augmented Theory of Planned Behavior

Science.gov (United States)

Rajah-Kanagasabai, Camilla J.; Roberts, Lynne D.

2015-01-01

This study examined the utility of the Theory of Planned Behavior model, augmented by descriptive norms and justifications, for predicting self-reported research misconduct and questionable research practices in university students. A convenience sample of 205 research active Western Australian university students (47 male, 158 female, ages 18–53 years, M = 22, SD = 4.78) completed an online survey. There was a low level of engagement in research misconduct, with approximately one in seven students reporting data fabrication and one in eight data falsification. Path analysis and model testing in LISREL supported a parsimonious two step mediation model, providing good fit to the data. After controlling for social desirability, the effect of attitudes, subjective norms, descriptive norms and perceived behavioral control on student engagement in research misconduct and questionable research practices was mediated by justifications and then intention. This revised augmented model accounted for a substantial 40.8% of the variance in student engagement in research misconduct and questionable research practices, demonstrating its predictive utility. The model can be used to target interventions aimed at reducing student engagement in research misconduct and questionable research practices. PMID:25983709

Two layers LSTM with attention for multi-choice question answering in exams

Science.gov (United States)

Li, Yongbin

2018-03-01

Question Answering in Exams is typical question answering task that aims to test how accurately the model could answer the questions in exams. In this paper, we use general deep learning model to solve the multi-choice question answering task. Our approach is to build distributed word embedding of question and answers instead of manually extracting features or linguistic tools, meanwhile, for improving the accuracy, the external corpus is introduced. The framework uses a two layers LSTM with attention which get a significant result. By contrast, we introduce the simple long short-term memory (QA-LSTM) model and QA-LSTM-CNN model and QA-LSTM with attention model as the reference. Experiment demonstrate superior performance of two layers LSTM with attention compared to other models in question answering task.

Performance of the Angio Detect™ in-clinic test kit for detection of Angiostrongylus vasorum infection in dog samples from Europe

DEFF Research Database (Denmark)

Liu, Jiayou; Schnyder, Manuela; Willesen, Jakob L.

2017-01-01

of the Angio Detect test kit by comparing Angio Detect testing results using serum or plasma samples with the results of Baermann-Wetzel testing using matched fecal samples. Samples from 214 dogs [with clinically suspected (N = 195) or diagnosed angiostrongylosis (N = 19)] were used for this evaluation......; sensitivity of the Angio Detect test was 97.1% (95%CI: 85.1%–99.9%). The Angio Detect test was negative for 177 of 179 samples that were negative by the Baermann-Wetzel test; specificity was 98.9% (95%CI: 96.0%–99.9%). In cross-reactivity testing, all 89 samples from dogs confirmed to be infected with other...... common nematodes (Dirofilaria immitis, D. repens, Crenosoma vulpis, hookworms, ascarids, or whipworms) were all negative for A. vasorum by the Angio Detect antigen test. Angio Detect provides a rapid and reliable method for diagnosis of A. vasorum in clinically suspected dogs at risk for infection...

Quota sampling in internet research: practical issues.

Science.gov (United States)

Im, Eun-Ok; Chee, Wonshik

2011-07-01

Quota sampling has been suggested as a potentially good method for Internet-based research and has been used by several researchers working with Internet samples. However, very little is known about the issues or concerns in using a quota sampling method in Internet research. The purpose of this article was to present the practical issues using quota sampling in an Internet-based study. During the Internet study, the research team recorded all recruitment issues that arose and made written notes indicating the possible reasons for the problems. In addition, biweekly team discussions were conducted for which written records were kept. Overall, quota sampling was effective in ensuring that an adequate number of midlife women were recruited from the targeted ethnic groups. However, during the study process, we encountered the following practical issues using quota sampling: (1) difficulty reaching out to women in lower socioeconomic classes, (2) difficulty ensuring authenticity of participants' identities, (3) participants giving inconsistent answers for the screening questions versus the Internet survey questions, (4) potential problems with a question on socioeconomic status, (5) resentment toward the research project and/or researchers because of rejection, and (6) a longer time and more expense than anticipated.

High explosive spot test analyses of samples from Operable Unit (OU) 1111

Energy Technology Data Exchange (ETDEWEB)

McRae, D.; Haywood, W.; Powell, J.; Harris, B.

1995-01-01

A preliminary evaluation has been completed of environmental contaminants at selected sites within the Group DX-10 (formally Group M-7) area. Soil samples taken from specific locations at this detonator facility were analyzed for harmful metals and screened for explosives. A sanitary outflow, a burn pit, a pentaerythritol tetranitrate (PETN) production outflow field, an active firing chamber, an inactive firing chamber, and a leach field were sampled. Energy dispersive x-ray fluorescence (EDXRF) was used to obtain semi-quantitative concentrations of metals in the soil. Two field spot-test kits for explosives were used to assess the presence of energetic materials in the soil and in items found at the areas tested. PETN is the major explosive in detonators manufactured and destroyed at Los Alamos. No measurable amounts of PETN or other explosives were detected in the soil, but items taken from the burn area and a high-energy explosive (HE)/chemical sump were contaminated. The concentrations of lead, mercury, and uranium are given.

Methodology Series Module 5: Sampling Strategies.

Science.gov (United States)

Setia, Maninder Singh

2016-01-01

Once the research question and the research design have been finalised, it is important to select the appropriate sample for the study. The method by which the researcher selects the sample is the ' Sampling Method'. There are essentially two types of sampling methods: 1) probability sampling - based on chance events (such as random numbers, flipping a coin etc.); and 2) non-probability sampling - based on researcher's choice, population that accessible & available. Some of the non-probability sampling methods are: purposive sampling, convenience sampling, or quota sampling. Random sampling method (such as simple random sample or stratified random sample) is a form of probability sampling. It is important to understand the different sampling methods used in clinical studies and mention this method clearly in the manuscript. The researcher should not misrepresent the sampling method in the manuscript (such as using the term ' random sample' when the researcher has used convenience sample). The sampling method will depend on the research question. For instance, the researcher may want to understand an issue in greater detail for one particular population rather than worry about the ' generalizability' of these results. In such a scenario, the researcher may want to use ' purposive sampling' for the study.

Methodology series module 5: Sampling strategies

Directory of Open Access Journals (Sweden)

Maninder Singh Setia

2016-01-01

Full Text Available Once the research question and the research design have been finalised, it is important to select the appropriate sample for the study. The method by which the researcher selects the sample is the 'Sampling Method'. There are essentially two types of sampling methods: 1 probability sampling – based on chance events (such as random numbers, flipping a coin etc.; and 2 non-probability sampling – based on researcher's choice, population that accessible & available. Some of the non-probability sampling methods are: purposive sampling, convenience sampling, or quota sampling. Random sampling method (such as simple random sample or stratified random sample is a form of probability sampling. It is important to understand the different sampling methods used in clinical studies and mention this method clearly in the manuscript. The researcher should not misrepresent the sampling method in the manuscript (such as using the term 'random sample' when the researcher has used convenience sample. The sampling method will depend on the research question. For instance, the researcher may want to understand an issue in greater detail for one particular population rather than worry about the 'generalizability' of these results. In such a scenario, the researcher may want to use 'purposive sampling' for the study.

Selective Attentional Effects of Textbook Study Questions on Student Learning in Science.

Science.gov (United States)

Holliday, William G.

1981-01-01

Reports results of a study testing a selective attentional model which predicted that textbook study questions adjunct to a flow diagram will focus students' attention more upon questioned information and less upon nonquestioned information. A picture-word diagram describing biogeochemical cycles to high school biology students (N=176) was used.…

Classroom Questioning Tendencies from the Perspective of Big Data

Science.gov (United States)

Lu, Wang; Rongxiao, Cai

2016-01-01

We are now living in an era of big data. From the perspective of data analysis of classroom questioning, the paper chooses three districts in City B that have significant differences. These are educationally developed District D, less developed District F, and developing District M. The study uses the stratified sampling method to choose from…

Methodology Series Module 5: Sampling Strategies

Science.gov (United States)

Setia, Maninder Singh

2016-01-01

Once the research question and the research design have been finalised, it is important to select the appropriate sample for the study. The method by which the researcher selects the sample is the ‘ Sampling Method’. There are essentially two types of sampling methods: 1) probability sampling – based on chance events (such as random numbers, flipping a coin etc.); and 2) non-probability sampling – based on researcher's choice, population that accessible & available. Some of the non-probability sampling methods are: purposive sampling, convenience sampling, or quota sampling. Random sampling method (such as simple random sample or stratified random sample) is a form of probability sampling. It is important to understand the different sampling methods used in clinical studies and mention this method clearly in the manuscript. The researcher should not misrepresent the sampling method in the manuscript (such as using the term ‘ random sample’ when the researcher has used convenience sample). The sampling method will depend on the research question. For instance, the researcher may want to understand an issue in greater detail for one particular population rather than worry about the ‘ generalizability’ of these results. In such a scenario, the researcher may want to use ‘ purposive sampling’ for the study. PMID:27688438

Report of the Workshop for Life Detection in Samples from Mars

Science.gov (United States)

Kminek, Gerhard; Conley, Catherine; Allen, Carlton C.; Bartlett, Douglas H.; Beaty, David W.; Benning, Liane G.; Bhartia, Rohit; Boston, Penelope J.; Duchaine, Caroline; Farmer, Jack D.;

Asking Questions in Academia

DEFF Research Database (Denmark)

Hansen, Annette Skovsted

2014-01-01

Motivation for the activity In academia the most important skill is to ask academically relevant and sound questions. This is not easy and students need to practice asking questions orally and in writing before they write research papers.......Motivation for the activity In academia the most important skill is to ask academically relevant and sound questions. This is not easy and students need to practice asking questions orally and in writing before they write research papers....

Inconsistencies between alcohol screening results based on AUDIT-C scores and reported drinking on the AUDIT-C questions: prevalence in two US national samples

Science.gov (United States)

2014-01-01

Background The AUDIT-C is an extensively validated screen for unhealthy alcohol use (i.e. drinking above recommended limits or alcohol use disorder), which consists of three questions about alcohol consumption. AUDIT-C scores ≥4 points for men and ≥3 for women are considered positive screens based on US validation studies that compared the AUDIT-C to “gold standard” measures of unhealthy alcohol use from independent, detailed interviews. However, results of screening—positive or negative based on AUDIT-C scores—can be inconsistent with reported drinking on the AUDIT-C questions. For example, individuals can screen positive based on the AUDIT-C score while reporting drinking below US recommended limits on the same AUDIT-C. Alternatively, they can screen negative based on the AUDIT-C score while reporting drinking above US recommended limits. Such inconsistencies could complicate interpretation of screening results, but it is unclear how often they occur in practice. Methods This study used AUDIT-C data from respondents who reported past-year drinking on one of two national US surveys: a general population survey (N = 26,610) and a Veterans Health Administration (VA) outpatient survey (N = 467,416). Gender-stratified analyses estimated the prevalence of AUDIT-C screen results—positive or negative screens based on the AUDIT-C score—that were inconsistent with reported drinking (above or below US recommended limits) on the same AUDIT-C. Results Among men who reported drinking, 13.8% and 21.1% of US general population and VA samples, respectively, had screening results based on AUDIT-C scores (positive or negative) that were inconsistent with reported drinking on the AUDIT-C questions (above or below US recommended limits). Among women who reported drinking, 18.3% and 20.7% of US general population and VA samples, respectively, had screening results that were inconsistent with reported drinking. Limitations This study did not include an

Bayesian stratified sampling to assess corpus utility

Energy Technology Data Exchange (ETDEWEB)

Hochberg, J.; Scovel, C.; Thomas, T.; Hall, S.

1998-12-01

This paper describes a method for asking statistical questions about a large text corpus. The authors exemplify the method by addressing the question, ``What percentage of Federal Register documents are real documents, of possible interest to a text researcher or analyst?`` They estimate an answer to this question by evaluating 200 documents selected from a corpus of 45,820 Federal Register documents. Bayesian analysis and stratified sampling are used to reduce the sampling uncertainty of the estimate from over 3,100 documents to fewer than 1,000. A possible application of the method is to establish baseline statistics used to estimate recall rates for information retrieval systems.

Investigating the Grammatical and Pragmatic Origins of Wh-Questions in Children with Autism Spectrum Disorders

Directory of Open Access Journals (Sweden)

Manya Jyotishi

2017-03-01

Full Text Available Compared to typically developing children, children with autism (ASD show delayed production of wh-questions. It is currently controversial the degree to which such deficits derive from social-pragmatic requirements and/or because these are complex grammatical structures. The current study employed the intermodal preferential looking (IPL paradigm, which reduces social-pragmatic demands. The IPL paradigm can help distinguish these proposals, as successful comprehension promotes the “pragmatics-origins” argument whereas comprehension difficulties would implicate a “grammatical-origins” argument. Additionally, we tested both the linguistic and social explanations by assessing the contributions of children's early grammatical knowledge (i.e., SVO word order and their social-pragmatic scores on the Vineland to their later wh-question comprehension. Fourteen children with ASD and 17 TD children, matched on language level, were visited in their homes at 4-month intervals. Comprehension of wh-questions and SVO word order were tested via IPL: the wh-question video showed a costumed horse and bird serving as agents or patients of familiar transitive actions. During the test trials, they were displayed side by side with directing audios (e.g., “What did the horse tickle?”, “What hugged the bird?”, “Where is the horse/bird?”. Children's eye movements were coded offline; the DV was their percent looking to the named item during test. To show comprehension, children should look longer at the named item during a where-question than during a subject-wh or object-wh question. Results indicated that TD children comprehended both subject and object wh-questions at 32 months of age. Comprehension of object-wh questions emerged chronologically later in children with ASD compared to their TD peers, but at similar levels of language. Moreover, performance on word order and social-pragmatic scores independently predicted both groups' later

Improving Student Question Classification

Science.gov (United States)

Heiner, Cecily; Zachary, Joseph L.

2009-01-01

Students in introductory programming classes often articulate their questions and information needs incompletely. Consequently, the automatic classification of student questions to provide automated tutorial responses is a challenging problem. This paper analyzes 411 questions from an introductory Java programming course by reducing the natural…

Integrated sample-to-detection chip for nucleic acid test assays.

Science.gov (United States)

Prakash, R; Pabbaraju, K; Wong, S; Tellier, R; Kaler, K V I S

2016-06-01

Nucleic acid based diagnostic techniques are routinely used for the detection of infectious agents. Most of these assays rely on nucleic acid extraction platforms for the extraction and purification of nucleic acids and a separate real-time PCR platform for quantitative nucleic acid amplification tests (NATs). Several microfluidic lab on chip (LOC) technologies have been developed, where mechanical and chemical methods are used for the extraction and purification of nucleic acids. Microfluidic technologies have also been effectively utilized for chip based real-time PCR assays. However, there are few examples of microfluidic systems which have successfully integrated these two key processes. In this study, we have implemented an electro-actuation based LOC micro-device that leverages multi-frequency actuation of samples and reagents droplets for chip based nucleic acid extraction and real-time, reverse transcription (RT) PCR (qRT-PCR) amplification from clinical samples. Our prototype micro-device combines chemical lysis with electric field assisted isolation of nucleic acid in a four channel parallel processing scheme. Furthermore, a four channel parallel qRT-PCR amplification and detection assay is integrated to deliver the sample-to-detection NAT chip. The NAT chip combines dielectrophoresis and electrostatic/electrowetting actuation methods with resistive micro-heaters and temperature sensors to perform chip based integrated NATs. The two chip modules have been validated using different panels of clinical samples and their performance compared with standard platforms. This study has established that our integrated NAT chip system has a sensitivity and specificity comparable to that of the standard platforms while providing up to 10 fold reduction in sample/reagent volumes.

Optimal sampling schemes applied in geology

CSIR Research Space (South Africa)

Debba, Pravesh

2010-05-01

Full Text Available Methodology 6 Results 7 Background and Research Question for Study 2 8 Study Area and Data 9 Methodology 10 Results 11 Conclusions Debba (CSIR) Optimal Sampling Schemes applied in Geology UP 2010 2 / 47 Outline 1 Introduction to hyperspectral remote... sensing 2 Objective of Study 1 3 Study Area 4 Data used 5 Methodology 6 Results 7 Background and Research Question for Study 2 8 Study Area and Data 9 Methodology 10 Results 11 Conclusions Debba (CSIR) Optimal Sampling Schemes applied in Geology...

Addressing challenges to MMPI-2-RF-based testimony: questions and answers.

Science.gov (United States)

Ben-Porath, Yossef S

2012-11-01

Introduction of a new version of a psychological test brings with it challenges that can be accentuated by the adversarial nature of the legal process. In the case of the Minnesota Multiphasic Personality Inventory-2 Restructured Form (MMPI-2-RF), these challenges can be addressed by becoming familiar with the rationale for and the methods used in revising the inventory, the information contained in the test manuals, and the growing peer-reviewed literature on the test. Potential challenges to MMPI-2-RF-based testimony are identified in this article and discussed in question and answer format. The questions guiding this discussion are based on the Daubert factors, established in 1993 by the US Supreme Court as criteria for gauging the scientific validity of proffered expert testimony. The answers to these questions apply more broadly to testimony in depositions, pre-trial hearings, and at trial. Consideration of the MMPI-2-RF in light of the Daubert factors indicates that the instrument has been subjected to extensive empirical testing and that a substantial peer-reviewed literature is available to guide and support its use. Information about the known and potential rate of error associated with MMPI-2-RF scores is available, and standard procedures for administration, scoring, and interpretation of the inventory are detailed in the test administration manual. Indicators of MMPI-2-RF acceptance can be cited, and criticisms of the MMPI-2-RF can be addressed with information available in the test documents and an extensive, modern, and actively growing peer-reviewed literature.

The Influence of temporal sampling regime on the WFD classification of catchments within the Eden Demonstration Test Catchment Project

Science.gov (United States)

Jonczyk, Jennine; Haygarth, Phil; Quinn, Paul; Reaney, Sim

2014-05-01

A high temporal resolution data set from the Eden Demonstration Test Catchment (DTC) project is used to investigate the processes causing pollution and the influence of temporal sampling regime on the WFD classification of three catchments. This data highlights WFD standards may not be fit for purpose. The Eden DTC project is part of a UK government-funded project designed to provide robust evidence regarding how diffuse pollution can be cost-effectively controlled to improve and maintain water quality in rural river catchments. The impact of multiple water quality parameters on ecosystems and sustainable food production are being studied at the catchment scale. Three focus catchments approximately 10 km2 each, have been selected to represent the different farming practices and geophysical characteristics across the Eden catchment, Northern England. A field experimental programme has been designed to monitor the dynamics of agricultural diffuse pollution at multiple scales using state of the art sensors providing continuous real time data. The data set, which includes Total Phosphorus and Total Reactive Phosphorus, Nitrate, Ammonium, pH, Conductivity, Turbidity and Chlorophyll a reveals the frequency and duration of nutrient concentration target exceedance which arises from the prevalence of storm events of increasing magnitude. This data set is sub-sampled at different time intervals to explore how different sampling regimes affects our understanding of nutrient dynamics and the ramification of the different regimes to WFD chemical status. This presentation seeks to identify an optimum temporal resolution of data for effective catchment management and to question the usefulness of the WFD status metric for determining health of a system. Criteria based on high frequency short duration events needs to be accounted for.

Educators Questioning Timing of State Tests Reflecting Standards

Science.gov (United States)

Gewertz, Catherine

2013-01-01

New York is ahead of most states in its work to design detailed curricula and professional development for the common core and to build brand-new tests to reflect them. What's unfolding in the Empire State as a result of that work illustrates the way the common standards can pressure changes in the education landscape, and torque the tensions…

ELIMINATION OF THE CHARACTERIZATION OF DWPF POUR STREAM SAMPLE AND THE GLASS FABRICATION AND TESTING OF THE DWPF SLUDGE BATCH QUALIFICATION SAMPLE

Energy Technology Data Exchange (ETDEWEB)

Amoroso, J.; Peeler, D.; Edwards, T.

2012-05-11

A recommendation to eliminate all characterization of pour stream glass samples and the glass fabrication and Product Consistency Test (PCT) of the sludge batch qualification sample was made by a Six-Sigma team chartered to eliminate non-value-added activities for the Defense Waste Processing Facility (DWPF) sludge batch qualification program and is documented in the report SS-PIP-2006-00030. That recommendation was supported through a technical data review by the Savannah River National Laboratory (SRNL) and is documented in the memorandums SRNL-PSE-2007-00079 and SRNL-PSE-2007-00080. At the time of writing those memorandums, the DWPF was processing sludge-only waste but, has since transitioned to a coupled operation (sludge and salt). The SRNL was recently tasked to perform a similar data review relevant to coupled operations and re-evaluate the previous recommendations. This report evaluates the validity of eliminating the characterization of pour stream glass samples and the glass fabrication and Product Consistency Test (PCT) of the sludge batch qualification samples based on sludge-only and coupled operations. The pour stream sample has confirmed the DWPF's ability to produce an acceptable waste form from Slurry Mix Evaporator (SME) blending and product composition/durability predictions for the previous sixteen years but, ultimately the pour stream analysis has added minimal value to the DWPF's waste qualification strategy. Similarly, the information gained from the glass fabrication and PCT of the sludge batch qualification sample was determined to add minimal value to the waste qualification strategy since that sample is routinely not representative of the waste composition ultimately processed at the DWPF due to blending and salt processing considerations. Moreover, the qualification process has repeatedly confirmed minimal differences in glass behavior from actual radioactive waste to glasses fabricated from simulants or batch chemicals. In

Elimination Of The Characterization Of DWPF Pour Stream Sample And The Glass Fabrication And Testing Of The DWPF Sludge Batch Qualification Sample

International Nuclear Information System (INIS)

Amoroso, J.; Peeler, D.; Edwards, T.

2012-01-01

A recommendation to eliminate all characterization of pour stream glass samples and the glass fabrication and Product Consistency Test (PCT) of the sludge batch qualification sample was made by a Six-Sigma team chartered to eliminate non-value-added activities for the Defense Waste Processing Facility (DWPF) sludge batch qualification program and is documented in the report SS-PIP-2006-00030. That recommendation was supported through a technical data review by the Savannah River National Laboratory (SRNL) and is documented in the memorandums SRNL-PSE-2007-00079 and SRNL-PSE-2007-00080. At the time of writing those memorandums, the DWPF was processing sludge-only waste but, has since transitioned to a coupled operation (sludge and salt). The SRNL was recently tasked to perform a similar data review relevant to coupled operations and re-evaluate the previous recommendations. This report evaluates the validity of eliminating the characterization of pour stream glass samples and the glass fabrication and Product Consistency Test (PCT) of the sludge batch qualification samples based on sludge-only and coupled operations. The pour stream sample has confirmed the DWPF's ability to produce an acceptable waste form from Slurry Mix Evaporator (SME) blending and product composition/durability predictions for the previous sixteen years but, ultimately the pour stream analysis has added minimal value to the DWPF's waste qualification strategy. Similarly, the information gained from the glass fabrication and PCT of the sludge batch qualification sample was determined to add minimal value to the waste qualification strategy since that sample is routinely not representative of the waste composition ultimately processed at the DWPF due to blending and salt processing considerations. Moreover, the qualification process has repeatedly confirmed minimal differences in glass behavior from actual radioactive waste to glasses fabricated from simulants or batch chemicals. In contrast, the

Optimal sample size for probability of detection curves

International Nuclear Information System (INIS)

Annis, Charles; Gandossi, Luca; Martin, Oliver

2013-01-01

Highlights: • We investigate sample size requirement to develop probability of detection curves. • We develop simulations to determine effective inspection target sizes, number and distribution. • We summarize these findings and provide guidelines for the NDE practitioner. -- Abstract: The use of probability of detection curves to quantify the reliability of non-destructive examination (NDE) systems is common in the aeronautical industry, but relatively less so in the nuclear industry, at least in European countries. Due to the nature of the components being inspected, sample sizes tend to be much lower. This makes the manufacturing of test pieces with representative flaws, in sufficient numbers, so to draw statistical conclusions on the reliability of the NDT system under investigation, quite costly. The European Network for Inspection and Qualification (ENIQ) has developed an inspection qualification methodology, referred to as the ENIQ Methodology. It has become widely used in many European countries and provides assurance on the reliability of NDE systems, but only qualitatively. The need to quantify the output of inspection qualification has become more important as structural reliability modelling and quantitative risk-informed in-service inspection methodologies become more widely used. A measure of the NDE reliability is necessary to quantify risk reduction after inspection and probability of detection (POD) curves provide such a metric. The Joint Research Centre, Petten, The Netherlands supported ENIQ by investigating the question of the sample size required to determine a reliable POD curve. As mentioned earlier manufacturing of test pieces with defects that are typically found in nuclear power plants (NPPs) is usually quite expensive. Thus there is a tendency to reduce sample sizes, which in turn increases the uncertainty associated with the resulting POD curve. The main question in conjunction with POS curves is the appropriate sample size. Not

Secondary Data Analysis: An Important Tool for Addressing Developmental Questions

Science.gov (United States)

Greenhoot, Andrea Follmer; Dowsett, Chantelle J.

2012-01-01

Existing data sets can be an efficient, powerful, and readily available resource for addressing questions about developmental science. Many of the available databases contain hundreds of variables of interest to developmental psychologists, track participants longitudinally, and have representative samples. In this article, the authors discuss the…

A Rigorous Test of the Fit of the Circumplex Model to Big Five Personality Data: Theoretical and Methodological Issues and Two Large Sample Empirical Tests.

Science.gov (United States)

DeGeest, David Scott; Schmidt, Frank

2015-01-01

Our objective was to apply the rigorous test developed by Browne (1992) to determine whether the circumplex model fits Big Five personality data. This test has yet to be applied to personality data. Another objective was to determine whether blended items explained correlations among the Big Five traits. We used two working adult samples, the Eugene-Springfield Community Sample and the Professional Worker Career Experience Survey. Fit to the circumplex was tested via Browne's (1992) procedure. Circumplexes were graphed to identify items with loadings on multiple traits (blended items), and to determine whether removing these items changed five-factor model (FFM) trait intercorrelations. In both samples, the circumplex structure fit the FFM traits well. Each sample had items with dual-factor loadings (8 items in the first sample, 21 in the second). Removing blended items had little effect on construct-level intercorrelations among FFM traits. We conclude that rigorous tests show that the fit of personality data to the circumplex model is good. This finding means the circumplex model is competitive with the factor model in understanding the organization of personality traits. The circumplex structure also provides a theoretically and empirically sound rationale for evaluating intercorrelations among FFM traits. Even after eliminating blended items, FFM personality traits remained correlated.

Cross-validation of the Dot Counting Test in a large sample of credible and non-credible patients referred for neuropsychological testing.

Science.gov (United States)

McCaul, Courtney; Boone, Kyle B; Ermshar, Annette; Cottingham, Maria; Victor, Tara L; Ziegler, Elizabeth; Zeller, Michelle A; Wright, Matthew

2018-01-18

To cross-validate the Dot Counting Test in a large neuropsychological sample. Dot Counting Test scores were compared in credible (n = 142) and non-credible (n = 335) neuropsychology referrals. Non-credible patients scored significantly higher than credible patients on all Dot Counting Test scores. While the original E-score cut-off of ≥17 achieved excellent specificity (96.5%), it was associated with mediocre sensitivity (52.8%). However, the cut-off could be substantially lowered to ≥13.80, while still maintaining adequate specificity (≥90%), and raising sensitivity to 70.0%. Examination of non-credible subgroups revealed that Dot Counting Test sensitivity in feigned mild traumatic brain injury (mTBI) was 55.8%, whereas sensitivity was 90.6% in patients with non-credible cognitive dysfunction in the context of claimed psychosis, and 81.0% in patients with non-credible cognitive performance in depression or severe TBI. Thus, the Dot Counting Test may have a particular role in detection of non-credible cognitive symptoms in claimed psychiatric disorders. Alternative to use of the E-score, failure on ≥1 cut-offs applied to individual Dot Counting Test scores (≥6.0″ for mean grouped dot counting time, ≥10.0″ for mean ungrouped dot counting time, and ≥4 errors), occurred in 11.3% of the credible sample, while nearly two-thirds (63.6%) of the non-credible sample failed one of more of these cut-offs. An E-score cut-off of 13.80, or failure on ≥1 individual score cut-offs, resulted in few false positive identifications in credible patients, and achieved high sensitivity (64.0-70.0%), and therefore appear appropriate for use in identifying neurocognitive performance invalidity.

Leach testing of SYNROC and glass samples at 85 and 200/degree/C

International Nuclear Information System (INIS)

Oversby, V.M.; Ringwood, A.E.

1981-01-01

Leach tests were conducted on 0.5 g disc samples of SYNROC and two glass types using distilled water at 85 and 200/degree/C. No leaching was detected for SYNROC at either temperature. Thus, the upper limit on leach rate for SYNROC is <0.005 g/m/sup 2/d. Waste glass PNL 76-68 had leach rates of 1.4 g/m/sup 2/ d at 85/degree/C and 8.9 g/m/sup 2/ d at 200/degree/C, while 73-1 glass frit had a leach rate of 41 g/m/sup 2/ d at 200/degree/C. The leach tests were repeated in the presence of rock powders. Again, no leaching was measurable for SYNROC. PNL 76-68 glass had leach rates between 4 and 23 g/m/sup 2/ d at 200/degree/C and 73-1 frit leached at rates between 29 and 176 g/m/sup 2/ d at 200/degree/C. Tests were also conducted on crushed glass samples (PNL 76-68, 100-200 /mu/m size fraction). Bulk leach rates were calculated based on measurement of Ca, Cs, and U in the leach solutions. The results of the leach tests show that SYNROC is several orders of magnitude more resistant to leaching than glass

Waste retrieval sluicing system vapor sampling and analysis plan for evaluation of organic emissions, process test phase III

International Nuclear Information System (INIS)

SASAKI, L.M.

1999-01-01

This sampling and analysis plan identifies characterization objectives pertaining to sample collection, laboratory analytical evaluation, and reporting requirements for vapor samples obtained to address vapor issues related to the sluicing of tank 241-C-106. Sampling will be performed in accordance with Waste Retrieval Sluicing System Emissions Collection Phase III (Jones 1999) and Process Test Plan Phase III, Waste Retrieval Sluicing System Emissions Collection (Powers 1999). Analytical requirements include those specified in Request for Ecology Concurrence on Draft Strategy/Path Forward to Address Concerns Regarding Organic Emissions from C-106 Sluicing Activities (Peterson 1998). The Waste Retrieval Sluicing System was installed to retrieve and transfer high-heat sludge from tank 241-C-106 to tank 241-AY-102, which is designed for high-heat waste storage. During initial sluicing of tank 241-C-106 in November 1998, operations were halted due to detection of unexpected high volatile organic compounds in emissions that exceeded regulatory permit limits. Several workers also reported smelling sharp odors and throat irritation. Vapor grab samples from the 296-C-006 ventilation system were taken as soon as possible after detection; the analyses indicated that volatile and semi-volatile organic compounds were present. In December 1998, a process test (phase I) was conducted in which the pumps in tanks 241-C-106 and 241-AY-102 were operated and vapor samples obtained to determine constituents that may be present during active sluicing of tank 241-C-106. The process test was suspended when a jumper leak was detected. On March 7, 1999, phase I1 of the process test was performed; the sluicing system was operated for approximately 7 hours and was ended using the controlled shutdown method when the allowable amount of solids were transferred to 241-AY-102. The phase II test was successful, however, further testing is required to obtain vapor samples at higher emission levels

Sample Results From The Extraction, Scrub, And Strip Test For The Blended NGS Solvent

Energy Technology Data Exchange (ETDEWEB)

Washington, A. L. II [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Peters, T. B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2014-03-03

This report summarizes the results of the extraction, scrub, and strip testing for the September 2013 sampling of the Next Generation Solvent (NGS) Blended solvent from the Modular Caustic Side-Solvent Extraction Unit (MCU) Solvent Hold Tank. MCU is in the process of transitioning from the BOBCalixC6 solvent to the NGS Blend solvent. As part of that transition, MCU has intentionally created a blended solvent to be processed using the Salt Batch program. This sample represents the first sample received from that blended solvent. There were two ESS tests performed where NGS blended solvent performance was assessed using either the Tank 21 material utilized in the Salt Batch 7 analyses or a simulant waste material used in the V-5/V-10 contactor testing. This report tabulates the temperature corrected cesium distribution, or D_Cs values, step recovery percentage, and actual temperatures recorded during the experiment. This report also identifies the sample receipt date, preparation method, and analysis performed in the accumulation of the listed values. The calculated extraction D_Cs values using the Tank 21H material and simulant are 59.4 and 53.8, respectively. The DCs values for two scrub and three strip processes for the Tank 21 material are 4.58, 2.91, 0.00184, 0.0252, and 0.00575, respectively. The D-values for two scrub and three strip processes for the simulant are 3.47, 2.18, 0.00468, 0.00057, and 0.00572, respectively. These values are similar to previous measurements of Salt Batch 7 feed with lab-prepared blended solvent. These numbers are considered compatible to allow simulant testing to be completed in place of actual waste due to the limited availability of feed material.

Sample Results From The Extraction, Scrub, And Strip Test For The Blended NGS Solvent

International Nuclear Information System (INIS)

Washington, A. L. II; Peters, T. B.

2014-01-01

This report summarizes the results of the extraction, scrub, and strip testing for the September 2013 sampling of the Next Generation Solvent (NGS) Blended solvent from the Modular Caustic Side-Solvent Extraction Unit (MCU) Solvent Hold Tank. MCU is in the process of transitioning from the BOBCalixC6 solvent to the NGS Blend solvent. As part of that transition, MCU has intentionally created a blended solvent to be processed using the Salt Batch program. This sample represents the first sample received from that blended solvent. There were two ESS tests performed where NGS blended solvent performance was assessed using either the Tank 21 material utilized in the Salt Batch 7 analyses or a simulant waste material used in the V-5/V-10 contactor testing. This report tabulates the temperature corrected cesium distribution, or DCs values, step recovery percentage, and actual temperatures recorded during the experiment. This report also identifies the sample receipt date, preparation method, and analysis performed in the accumulation of the listed values. The calculated extraction DCs values using the Tank 21H material and simulant are 59.4 and 53.8, respectively. The DCs values for two scrub and three strip processes for the Tank 21 material are 4.58, 2.91, 0.00184, 0.0252, and 0.00575, respectively. The D-values for two scrub and three strip processes for the simulant are 3.47, 2.18, 0.00468, 0.00057, and 0.00572, respectively. These values are similar to previous measurements of Salt Batch 7 feed with lab-prepared blended solvent. These numbers are considered compatible to allow simulant testing to be completed in place of actual waste due to the limited availability of feed material

Sampling and physical and actinide characterization of colloids from the Grimsel test site

International Nuclear Information System (INIS)

Longworth, G.; Ivanovich, M.

1990-01-01

Samples of groundwater from a granite fracture at the Grimsel test site in Switzerland have been collected as part of a second intercomparison of groundwater colloid sampling and characterization techniques carried out by members of the Coco Club (colloids and complexes) sponsored by the CEC. This report describes the Harwell contribution to this exercise. The bulk of naturally occurring actinides were found to reside in solution with 10 particles/I (detection limit ∼50 nm) for samples determined by three laboratories. The colloids were shown to be negatively charged using microelectrophoresis and to be relatively stable. There was evidence of a reduction in the pH of the water after storage due to air contamination. This work has served to identify the problems associated with colloid sampling and characterization techniques

Epistemology: 5 Questions

DEFF Research Database (Denmark)

Epistemology: 5 Questions is a collection of short interviews based on 5 questions presented to some of the most influential and prominent scholars in epistemology. We hear their views on epistemology with particular emphasis on the intersection between mainstream and formal approaches to the field...

Test Plan for Rotary Mode Core Sample Truck Grapple Hoist Level Wind System

International Nuclear Information System (INIS)

BOGER, R.M.

1999-01-01

A Grapple Hoist Assembly is currently used on the Rotary Mode Core Sampling Trucks (RMCSTs) to actuate the sampler and retrieve the pintle rod during sampling operations. The hoist assembly includes a driven drum approximately two inches wide and six inches in diameter that rotates to pay out or reel in the 5/32-in. cable The current Grapple Hoist Assembly, detailed on drawing H-2-690057, is prone to ''bird nesting'' the cable on the drum. ''Bird nesting'' is a condition in which the cable does not wind onto the drum in a uniformly layered manner, but winds in a random fashion where the cable essentially ''piles up'' inappropriately on the drum and, on some occasions, winds on the drum drive shaft. A system to help control this ''bird nesting'' problem has been designed as an addition to the existing components of the Grapple Hoist Assembly. The new design consists of a mechanism that is timed with, and driven by, the shaft that drives the drum. This mechanism traverses back and forth across the width of the drum to lay the cable on the drum in a uniformly layered manner. This test plan establishes the acceptance criteria, test procedure and test conditions It also describes the test apparatus necessary to verify the adequacy of the level wind system design. The test is defined as qualification testing (LMHC 1999b) and as such will be performed at conditions beyond the parameters that the Grapple Hoist Assembly is allowed to operate by the Safety Equipment List (SEL)(LMHC 1998)

Test Plan for Rotary Mode Core Sample Truck Grapple Hoist Level Wind System

International Nuclear Information System (INIS)

BOGER, R.M.

1999-01-01

A Grapple Hoist Assembly is currently used on the Rotary Mode Core Sampling Trucks (RMCSTs) to actuate the sampler and retrieve the pintle rod during sampling operations. The hoist assembly includes a driven drum approximately two inches wide and six inches in diameter that rotates to pay out or reel in the 5/32-in. cable. The current Grapple Hoist Assembly, detailed on drawing H-2-690057, is prone to ''bird nesting'' the cable on the drum. ''Bird nesting'' is a condition in which the cable does not wind onto the drum in a uniformly layered manner, but winds in a random fashion where the cable essentially ''piles up'' inappropriately on the drum and, on some occasions, winds on the drum drive shaft. A system to help control this ''bird nesting'' problem has been designed as an addition to the existing components of the Grapple Hoist Assembly. The new design consists of a mechanism that is timed with, and driven by, the shaft that drives the drum. This mechanism traverses back and forth across the width of the drum to lay the cable on the drum in a uniformly layered manner. This test plan establishes the acceptance criteria, test procedure and test conditions. It also describes the test apparatus necessary to verify the adequacy of the level wind system design. The test is defined as qualification testing (LMHC 1999b) and as such will be performed at conditions beyond the parameters that the Grapple Hoist Assembly is allowed to operate by the Safety Equipment List

Measurement of flat samples with rough surfaces by Magnetic Adaptive Testing

Czech Academy of Sciences Publication Activity Database

Tomáš, Ivan; Kadlecová, Jana; Vértesy, G.

2012-01-01

Roč. 48, č. 4 (2012), s. 1441-1444 ISSN 0018-9464. [Conference on Soft Magnetic Materials (SMM20) /20./. Kos Island, 18.09.2011-22.09.2011] R&D Projects: GA ČR GA101/09/1323 Institutional research plan: CEZ:AV0Z10100520 Keywords : magnetic contact * magnetic adaptive testing * magnetically open samples * magnetic NDE Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.422, year: 2012

Centrifugation protocols: tests to determine optimal lithium heparin and citrate plasma sample quality.

Science.gov (United States)

Dimeski, Goce; Solano, Connie; Petroff, Mark K; Hynd, Matthew

2011-05-01

Currently, no clear guidelines exist for the most appropriate tests to determine sample quality from centrifugation protocols for plasma sample types with both lithium heparin in gel barrier tubes for biochemistry testing and citrate tubes for coagulation testing. Blood was collected from 14 participants in four lithium heparin and one serum tube with gel barrier. The plasma tubes were centrifuged at four different centrifuge settings and analysed for potassium (K(+)), lactate dehydrogenase (LD), glucose and phosphorus (Pi) at zero time, poststorage at six hours at 21 °C and six days at 2-8°C. At the same time, three citrate tubes were collected and centrifuged at three different centrifuge settings and analysed immediately for prothrombin time/international normalized ratio, activated partial thromboplastin time, derived fibrinogen and surface-activated clotting time (SACT). The biochemistry analytes indicate plasma is less stable than serum. Plasma sample quality is higher with longer centrifugation time, and much higher g force. Blood cells present in the plasma lyse with time or are damaged when transferred in the reaction vessels, causing an increase in the K(+), LD and Pi above outlined limits. The cells remain active and consume glucose even in cold storage. The SACT is the only coagulation parameter that was affected by platelets >10 × 10(9)/L in the citrate plasma. In addition to the platelet count, a limited but sensitive number of assays (K(+), LD, glucose and Pi for biochemistry, and SACT for coagulation) can be used to determine appropriate centrifuge settings to consistently obtain the highest quality lithium heparin and citrate plasma samples. The findings will aid laboratories to balance the need to provide the most accurate results in the best turnaround time.

Testing the efficiency of rover science protocols for robotic sample selection: A GeoHeuristic Operational Strategies Test