Evaluation of volatile organic compound (VOC) blank data and application of study reporting levels to groundwater data collected for the California GAMA Priority Basin Project, May 2004 through September 2010

Science.gov (United States)

Fram, Miranda S.; Olsen, Lisa D.; Belitz, Kenneth

2012-01-01

Volatile organic compounds (VOCs) were analyzed in quality-control samples collected for the California Groundwater Ambient Monitoring and Assessment (GAMA) Program Priority Basin Project. From May 2004 through September 2010, a total of 2,026 groundwater samples, 211 field blanks, and 109 source-solution blanks were collected and analyzed for concentrations of 85 VOCs. Results from analyses of these field and source-solution blanks and of 2,411 laboratory instrument blanks during the same time period were used to assess the quality of data for the 2,026 groundwater samples. Eighteen VOCs were detected in field blanks or source-solution blanks: acetone, benzene, bromodichloromethane, 2-butanone, carbon disulfide, chloroform, 1,1-dichloroethene, dichloromethane, ethylbenzene, tetrachloroethene, styrene, tetrahydrofuran, toluene, trichloroethene, trichlorofluoromethane, 1,2,4-trimethylbenzene, m- and p-xylenes, and o-xylene. The objective of the evaluation of the VOC-blank data was to determine if study reporting levels (SRLs) were needed for any of the VOCs detected in blanks to ensure the quality of the data from groundwater samples. An SRL is equivalent to a raised reporting level that is used in place of the reporting level used by the analyzing laboratory [long‑term method detection level (LT-MDL) or laboratory reporting level (LRL)] to reduce the probability of reporting false-positive detections. Evaluation of VOC-blank data was done in three stages: (1) identification of a set of representative quality‑control field blanks (QCFBs) to be used for calculation of SRLs and identification of VOCs amenable to the SRL approach, (2) evaluation of potential sources of contamination to blanks and groundwater samples by VOCs detected in field blanks, and (3) selection of appropriate SRLs from among four potential SRLs for VOCs detected in field blanks and application of those SRLs to the groundwater data. An important conclusion from this study is that to ensure the

NDE of ceramic insulator blanks by radiography

International Nuclear Information System (INIS)

Sarvanan, S.; Venkatraman, B.; Jayakumar, T.; Baldev Raj

1996-01-01

The production of ceramic insulators in electrical industry involves a number of steps, one of which is the green blank. The defects such as voids and crack can be present in the extruded green blank. One of the best non-destructive evaluation (NDE) technique radiography. This paper deals with the development of methodology based on theoretical modeling for the examination of ceramics by high sensitivity radiography. (author)

Improving friction stir welding of blanks of different thicknesses

Energy Technology Data Exchange (ETDEWEB)

Fratini, L. [Dipartimento di Tecnologia Meccanica, Produzione e Ingegneria Gestionale, Universita di Palermo, Viale delle Scienze, 90128 Palermo (Italy)], E-mail: abaqus@dtpm.unipa.it; Buffa, G. [Dipartimento di Tecnologia Meccanica, Produzione e Ingegneria Gestionale, Universita di Palermo, Viale delle Scienze, 90128 Palermo (Italy); Shivpuri, R. [Ohio State University, Department of Industrial, Welding and Systems Engineering, 1971 Neil Avenue, 210 Baker Systems, Columbus, Ohio 43210 (United States)

2007-06-25

Friction stir welding (FSW) appears to be a promising process even in the welding of blanks of different thicknesses. Actually, such particular tailor welded blanks (TWBs) are usually characterized by a reduction in ductility due to the utilized fusion welding process. In this paper the authors, starting from a preliminary feasibility study, investigate the possibility to improve the mechanical performances of friction stir welded blanks of aluminum alloy with different thicknesses. Both experiments and a FE analyses are developed for a few case studies with different thickness ratios between the blanks. The numerical investigations are performed with the aim to highlight the material temperature distribution during the process in order to determine process conditions for which an almost symmetric thermal flow is obtained in the two blanks of the joint. In this way, a few simple process design rules are derived and verified through experiments. In particular a thickness ratio up to 2 was considered and a joint resistance of about the 80% of the parent material ultimate tensile strength was observed.

Improving friction stir welding of blanks of different thicknesses

International Nuclear Information System (INIS)

Fratini, L.; Buffa, G.; Shivpuri, R.

2007-01-01

Friction stir welding (FSW) appears to be a promising process even in the welding of blanks of different thicknesses. Actually, such particular tailor welded blanks (TWBs) are usually characterized by a reduction in ductility due to the utilized fusion welding process. In this paper the authors, starting from a preliminary feasibility study, investigate the possibility to improve the mechanical performances of friction stir welded blanks of aluminum alloy with different thicknesses. Both experiments and a FE analyses are developed for a few case studies with different thickness ratios between the blanks. The numerical investigations are performed with the aim to highlight the material temperature distribution during the process in order to determine process conditions for which an almost symmetric thermal flow is obtained in the two blanks of the joint. In this way, a few simple process design rules are derived and verified through experiments. In particular a thickness ratio up to 2 was considered and a joint resistance of about the 80% of the parent material ultimate tensile strength was observed

Application of hard coatings for blanking and piercing tools

DEFF Research Database (Denmark)

Podgornik, B.; Zajec, B.; Bay, Niels

2011-01-01

The aim of the present investigation was to examine the possibility of reducing lubrication and replacing expensive tungsten carbide material in blanking/piercing through introduction of hard tool coatings. Results show that hard PVD coatings can be successfully used in blanking/piercing...... critical value under dry friction conditions and leads to tool failure. Therefore, at present oxidation and temperature resistant hard coatings can give improved wear resistance of stamping tools, but elimination of lubricants in blanking and piercing processes is still not feasible....

Metal flow of a tailor-welded blank in deep drawing process

Science.gov (United States)

Yan, Qi; Guo, Ruiquan

2005-01-01

Tailor welded blanks were used in the automotive industry to consolidate parts, reduce weight, and increase safety. In recent years, this technology was developing rapidly in China. In Chinese car models, tailor welded blanks had been applied in a lot of automobile parts such as rail, door inner, bumper, floor panel, etc. Concerns on the properties of tailor welded blanks had become more and more important for automobile industry. A lot of research had shown that the strength of the welded seam was higher than that of the base metal, such that the weld failure in the aspect of strength was not a critical issue. However, formability of tailor welded blanks in the stamping process was complex. Among them, the metal flow of tailor welded blanks in the stamping process must be investigated thoroughly in order to reduce the scrap rate during the stamping process in automobile factories. In this paper, the behavior of metal flow for tailor welded blanks made by the laser welding process with two types of different thickness combinations were studied in the deep drawing process. Simulations and experiment verification of the movement of weld line for tailor welded blanks were discussed in detail. Results showed that the control on the movement of welded seam during stamping process by taking some measures in the aspect of blank holder was effective.

Blanking Clearance and Punch Velocity Effects on The Sheared Edge Characteristic in Micro-Blanking of Commercially Pure Copper Sheet

OpenAIRE

Didin Zakaria Lubis; Ichsan Ristiawan

2017-01-01

This study aims to identify the influences between clearance and punch velocity on the part edge quality of blanked parts. Experiments have been conducted using material copper, punch-die clearance and punch velocity variations. In order to determine the reachable punch-die clearance and punch velocity required for blanking. The quality of the part-edge characteristics shows that higher punch velocity and decreases clearance value can improve the part-edge quality, resulting in smaller burr h...

3D finite element modelling of sheet metal blanking process

Science.gov (United States)

Bohdal, Lukasz; Kukielka, Leon; Chodor, Jaroslaw; Kulakowska, Agnieszka; Patyk, Radoslaw; Kaldunski, Pawel

2018-05-01

The shearing process such as the blanking of sheet metals has been used often to prepare workpieces for subsequent forming operations. The use of FEM simulation is increasing for investigation and optimizing the blanking process. In the current literature a blanking FEM simulations for the limited capability and large computational cost of the three dimensional (3D) analysis has been largely limited to two dimensional (2D) plane axis-symmetry problems. However, a significant progress in modelling which takes into account the influence of real material (e.g. microstructure of the material), physical and technological conditions can be obtained by using 3D numerical analysis methods in this area. The objective of this paper is to present 3D finite element analysis of the ductile fracture, strain distribution and stress in blanking process with the assumption geometrical and physical nonlinearities. The physical, mathematical and computer model of the process are elaborated. Dynamic effects, mechanical coupling, constitutive damage law and contact friction are taken into account. The application in ANSYS/LS-DYNA program is elaborated. The effect of the main process parameter a blanking clearance on the deformation of 1018 steel and quality of the blank's sheared edge is analyzed. The results of computer simulations can be used to forecasting quality of the final parts optimization.

Blanking and piercing theory, applications and recent experimental results

International Nuclear Information System (INIS)

Zaid, Adnan l O

2014-01-01

Blanking and piercing are manufacturing processes by which certain geometrical shapes are sheared off a sheet metal. If the sheared off part is the one required, the processes referred to as blanking and if the remaining part in the sheet is the one required, the process is referred to as piercing. In this paper, the theory and practice of these processes are reviewed and discussed The main parameters affecting these processes are presented and discussed. These include: the radial clearance percentage, punch and die geometrical parameters, for example punch and die profile radii. The abovementioned parameters on the force and energy required to effect blanking together with their effect on the quality of the products are also presented and discussed. Recent experimental results together with photomacrographs and photomicrographs are also included and discussed. Finally, the effect of punch and die wear on the quality of the blanks is alsogiven and discussed

Blanking and piercing theory, applications and recent experimental results

International Nuclear Information System (INIS)

Zaid, A. I. O.

2013-01-01

Blanking and piercing are manufacturing processes by which certain geometrical shapes are sheared off a sheet metal. If the sheared off part is the one required, the processes referred to as blanking and if the remaining part in the sheet is the one required, the process is referred to as piercing. In this paper, the theory and practice of these processes are reviewed and discussed The main parameters affecting these processes are presented and discussed. These include: the radial clearance percentage, punch and die geometrical parameters, for example punch and die profile radii. The above mentioned parameters on the force and energy required to effect blanking together with their effect on the quality of the products are also presented and discussed. Recent experimental results together with photomacrographs and photomicrographs are also included and discussed. Finally, the effect of punch and die wear on the quality of the blanks is also given and discussed. (author)

MATERIAL CHOICE AND BLANKS OPERATION TECHNOLOGY OF AK6 ALUMINIUM ALLOY

Directory of Open Access Journals (Sweden)

N. YE. Kalinina

2014-03-01

Full Text Available Purpose. Justification of the material and heat treatment method of aluminum alloy for the manufacturing of parts, type «plate» based on the results of microstructure and mechanical properties research; development of technological process of blanks operation of AK6 aluminum alloy. Methodology. Powdered alloy based on aluminum type AK6 was the research material. Finished forgings with the size 2520×1520×65 mm were obtained as a result of the preparation and forging of the blanks. After mechanical treatment of the blanks they were exposed to thermal processing and milling. Structure of the metal was examined under light microscope MIM-8M. Brinell hardness was used as the strength alloy characteristic. Findings. Influence analysis of alloy elements on the structure of deformable aluminum alloys was carried out. Research of influence of heat treatment modes on structure and properties of the AK6 alloy were performed. The improved technological process, which made it possible to obtain the item with the improved structure and properties and lower costs is offered. Originality. The samples of AK6 powdered alloy on fire resistance were tested. It is established that under heating of an example in the oxidative flame, it does not ignite to a temperature of 705 °C. The cause of high fire resistance of AK6 alloy samples was found, it is connected with the presence in the material the evenly distributed, small oxide inclusions and amorphous oxide film on the surface. Practical value. Hard conditions of work (corrosion in marine and industrial atmosphere, static and shock loads, cyclic temperature allow the use of the item in various designs.

Single point incremental forming of tailored blanks produced by friction stir welding

DEFF Research Database (Denmark)

Silva, M.B.; Skjødt, Martin; Vilaca, P.

2009-01-01

fromthe rotating single point-forming tool. Formability of the tailor welded blanks (TWB) is evaluated by means of benchmark tests carried out on truncated conical and pyramidal shapes and results are compared with similar tests performed on conventional reference blanks of the same material. Results show......This paper is focused on the single point incremental forming (SPIF) of tailored welded blanks produced by friction stirwelding (FSW). Special emphasis is placed on the know-how for producing the tailored blanks and on the utilization of innovative forming strategies to protect thewelding joint...... that the combination of SPIF with tailored welded blanks produced by FSW seems promising in the manufacture of complex sheet metal parts with high depths....

Finite element analysis of the combined fine blanking and extrusion process

Science.gov (United States)

Zheng, Peng-Fei

The combined fine blanking and extrusion process is such a metal forming process that fine blanking and forward extrusion are carried out on sheet metal material at the same time. There are two typical characteristics in this process, one is the fine blanking whose deformation mechanism is different from conventional blanking; the other is the sheet metal extrusion, which is different from the conventional extrusion. Even though fine blanking has been used in industry for many years, only limited literature can be found which deals with the theoretical analysis of it. On the other hand, no publications on the theoretical analysis of the sheet metal extrusion have been found. Intensive work should be carried out to reveal the mechanism of both fine blanking process and sheet metal extrusion process, and further the combined fine blanking and extrusion process. The scope of this thesis is to study the mechanics of fine blanking, sheet metal extrusion, and combined fine blanking and extrusion process one by one with the rigid-plastic finite element method. All of above processes are typical unsteady ones, especially the fine blanking process in which extremely severe and localized deformation occurs. Therefore, commercial programs can not be used to solve these problems up till now. Owing to this reason, a rigid-plastic finite element program was developed for simulating these processes where remeshing and mesh tracing techniques as well as the golden section method were adopted according to the characteristics of these processes in this thesis. Moreover, a permissible kinematic velocity field was adopted as the initial velocity field for simulating extrusion process successfully. Results from the simulation included the distorted mesh, the field of material flow, the stress and the strain distributions at various moments of deformation. Results under different deformation conditions such as different blanking clearances, different diameters of the extrusion punch and

The information gained from witnesses' responses to an initial "blank" lineup.

Science.gov (United States)

Palmer, Matthew A; Brewer, Neil; Weber, Nathan

2012-10-01

Wells ("The psychology of lineup identifications," Journal of Applied Social Psychology, 1984, 14, 89-103) proposed that a blank lineup (an initial lineup of known-to-be-innocent foils) can be used to screen eyewitnesses; witnesses who chose from a blank lineup (initial choosers) were more likely to make an error on a second lineup that contained a suspect than were witnesses who rejected a blank lineup (initial nonchoosers). Recent technological advances (e.g., computer-administered lineups) may overcome many of the practical difficulties cited as a barrier to the use of blank lineups. Our research extended knowledge about the blank lineup procedure by investigating the underlying causes of the difference in identification performance between initial choosers and initial nonchoosers. Studies 1a and 1b (total, N = 303) demonstrated that initial choosers were more likely to reject a second lineup than initial nonchoosers and witnesses who did not view a blank lineup, implying that cognitive biases (e.g., confirmation bias and commitment effects) influenced initial choosers' identification decisions. In Study 2 (N = 200), responses on a forced-choice identification test provided evidence that initial choosers have, on average, poorer memories for the culprit than do initial nonchoosers. We also investigated the usefulness of blank lineups for interpreting identification evidence. Diagnosticity ratios suggested that suspect identifications made by initial nonchoosers (cf. initial choosers) should have a greater impact on estimates of the likely guilt of the suspect. Furthermore, for initial nonchoosers, higher confidence in blank lineup rejections was associated with higher diagnosticity for subsequent suspect identifications. These results have implications for policy to guide the collection and interpretation of identification evidence. PsycINFO Database Record (c) 2012 APA, all rights reserved.

Super-Resolution Algorithm in Cumulative Virtual Blanking

Science.gov (United States)

Montillet, J. P.; Meng, X.; Roberts, G. W.; Woolfson, M. S.

2008-11-01

The proliferation of mobile devices and the emergence of wireless location-based services have generated consumer demand for precise location. In this paper, the MUSIC super-resolution algorithm is applied to time delay estimation for positioning purposes in cellular networks. The goal is to position a Mobile Station with UMTS technology. The problem of Base-Stations herability is solved using Cumulative Virtual Blanking. A simple simulator is presented using DS-SS signal. The results show that MUSIC algorithm improves the time delay estimation in both the cases whether or not Cumulative Virtual Blanking was carried out.

Wear of different PVD coatings at industrial fine-blanking field tests

Directory of Open Access Journals (Sweden)

Liina Lind

2015-09-01

Full Text Available Thin hard physical vapor deposited (PVD coatings play significant role on wear performance of fine-blanking punches in the presence of extremely high contact stresses. Nevertheless it seems that in blanking or fine-blanking the coatings are selected based on coincidence, trial-error-method or latest trends. There is limited information about planning and conducting the fine-blanking industrial field tests and measuring the wear of different coatings. In the present study a set of fine-blanking punches and laboratory specimens were prepared with three coatings – TiCN, nACRo and nACo. As substrate material Böhler S390 Microclean high speed steel was used. Coating mechanical properties (modulus of elasticity and nanohardness were measured and wear rate with alumina ball was determined using the reciprocating sliding test. Wear of coatings was measured from punches after industrial use. All of the tested coatings showed high variance of wear. However coatings nACo and nACRo have better average wear resistance in fine-blanking compared with the well-known TiCN. Industrial field tests show correlation to the ratio elastic strain to failure H/E.DOI: http://dx.doi.org/10.5755/j01.ms.21.3.7249

A content validated questionnaire for assessment of self reported venous blood sampling practices.

Science.gov (United States)

Bölenius, Karin; Brulin, Christine; Grankvist, Kjell; Lindkvist, Marie; Söderberg, Johan

2012-01-19

Venous blood sampling is a common procedure in health care. It is strictly regulated by national and international guidelines. Deviations from guidelines due to human mistakes can cause patient harm. Validated questionnaires for health care personnel can be used to assess preventable "near misses"--i.e. potential errors and nonconformities during venous blood sampling practices that could transform into adverse events. However, no validated questionnaire that assesses nonconformities in venous blood sampling has previously been presented. The aim was to test a recently developed questionnaire in self reported venous blood sampling practices for validity and reliability. We developed a questionnaire to assess deviations from best practices during venous blood sampling. The questionnaire contained questions about patient identification, test request management, test tube labeling, test tube handling, information search procedures and frequencies of error reporting. For content validity, the questionnaire was confirmed by experts on questionnaires and venous blood sampling. For reliability, test-retest statistics were used on the questionnaire answered twice. The final venous blood sampling questionnaire included 19 questions out of which 9 had in total 34 underlying items. It was found to have content validity. The test-retest analysis demonstrated that the items were generally stable. In total, 82% of the items fulfilled the reliability acceptance criteria. The questionnaire could be used for assessment of "near miss" practices that could jeopardize patient safety and gives several benefits instead of assessing rare adverse events only. The higher frequencies of "near miss" practices allows for quantitative analysis of the effect of corrective interventions and to benchmark preanalytical quality not only at the laboratory/hospital level but also at the health care unit/hospital ward.

A content validated questionnaire for assessment of self reported venous blood sampling practices

Directory of Open Access Journals (Sweden)

Bölenius Karin

2012-01-01

Full Text Available Abstract Background Venous blood sampling is a common procedure in health care. It is strictly regulated by national and international guidelines. Deviations from guidelines due to human mistakes can cause patient harm. Validated questionnaires for health care personnel can be used to assess preventable "near misses"--i.e. potential errors and nonconformities during venous blood sampling practices that could transform into adverse events. However, no validated questionnaire that assesses nonconformities in venous blood sampling has previously been presented. The aim was to test a recently developed questionnaire in self reported venous blood sampling practices for validity and reliability. Findings We developed a questionnaire to assess deviations from best practices during venous blood sampling. The questionnaire contained questions about patient identification, test request management, test tube labeling, test tube handling, information search procedures and frequencies of error reporting. For content validity, the questionnaire was confirmed by experts on questionnaires and venous blood sampling. For reliability, test-retest statistics were used on the questionnaire answered twice. The final venous blood sampling questionnaire included 19 questions out of which 9 had in total 34 underlying items. It was found to have content validity. The test-retest analysis demonstrated that the items were generally stable. In total, 82% of the items fulfilled the reliability acceptance criteria. Conclusions The questionnaire could be used for assessment of "near miss" practices that could jeopardize patient safety and gives several benefits instead of assessing rare adverse events only. The higher frequencies of "near miss" practices allows for quantitative analysis of the effect of corrective interventions and to benchmark preanalytical quality not only at the laboratory/hospital level but also at the health care unit/hospital ward.

When the Ostrich-Algorithm Fails: Blanking Method Affects Spike Train Statistics.

Science.gov (United States)

Joseph, Kevin; Mottaghi, Soheil; Christ, Olaf; Feuerstein, Thomas J; Hofmann, Ulrich G

2018-01-01

Modern electroceuticals are bound to employ the usage of electrical high frequency (130-180 Hz) stimulation carried out under closed loop control, most prominent in the case of movement disorders. However, particular challenges are faced when electrical recordings of neuronal tissue are carried out during high frequency electrical stimulation, both in-vivo and in-vitro . This stimulation produces undesired artifacts and can render the recorded signal only partially useful. The extent of these artifacts is often reduced by temporarily grounding the recording input during stimulation pulses. In the following study, we quantify the effects of this method, "blanking," on the spike count and spike train statistics. Starting from a theoretical standpoint, we calculate a loss in the absolute number of action potentials, depending on: width of the blanking window, frequency of stimulation, and intrinsic neuronal activity. These calculations were then corroborated by actual high signal to noise ratio (SNR) single cell recordings. We state that, for clinically relevant frequencies of 130 Hz (used for movement disorders) and realistic blanking windows of 2 ms, up to 27% of actual existing spikes are lost. We strongly advice cautioned use of the blanking method when spike rate quantification is attempted. Blanking (artifact removal by temporarily grounding input), depending on recording parameters, can lead to significant spike loss. Very careful use of blanking circuits is advised.

When the Ostrich-Algorithm Fails: Blanking Method Affects Spike Train Statistics

Directory of Open Access Journals (Sweden)

Kevin Joseph

2018-04-01

Full Text Available Modern electroceuticals are bound to employ the usage of electrical high frequency (130–180 Hz stimulation carried out under closed loop control, most prominent in the case of movement disorders. However, particular challenges are faced when electrical recordings of neuronal tissue are carried out during high frequency electrical stimulation, both in-vivo and in-vitro. This stimulation produces undesired artifacts and can render the recorded signal only partially useful. The extent of these artifacts is often reduced by temporarily grounding the recording input during stimulation pulses. In the following study, we quantify the effects of this method, “blanking,” on the spike count and spike train statistics. Starting from a theoretical standpoint, we calculate a loss in the absolute number of action potentials, depending on: width of the blanking window, frequency of stimulation, and intrinsic neuronal activity. These calculations were then corroborated by actual high signal to noise ratio (SNR single cell recordings. We state that, for clinically relevant frequencies of 130 Hz (used for movement disorders and realistic blanking windows of 2 ms, up to 27% of actual existing spikes are lost. We strongly advice cautioned use of the blanking method when spike rate quantification is attempted.Impact statementBlanking (artifact removal by temporarily grounding input, depending on recording parameters, can lead to significant spike loss. Very careful use of blanking circuits is advised.

Steroid radioimmunoassay: contribution of standards to blank values, ch. 4

International Nuclear Information System (INIS)

Froelich, M.; Termorshuizen, W.; Kenter, E.; Molenaar, A.J.

1977-01-01

The sensitivity of the radioimmunoassay of steroids is considerably reduced by high blank values which may be derived in part from co-chromatographed standards. Blank levels approach the detection limit of the radioimmunoassay of aldosterone, testosterone and androstenedione when 10,000 dpm (30-35 pg) labelled steroids are used as reference standard. When 20 μg aldosterone, testosterone, or androstenedione is used as standard, blank levels of up to 12,800 pg were measured in the radioimmunoassay. Application of the standards on a separate strip does not improve the results. From the experiments it appeared that contamination took place by transport by the solvent

High-speed blanking of copper alloy sheets: Material modeling and simulation

Science.gov (United States)

Husson, Ch.; Ahzi, S.; Daridon, L.

2006-08-01

To optimize the blanking process of thin copper sheets ( ≈ 1. mm thickness), it is necessary to study the influence of the process parameters such as the punch-die clearance and the wear of the punch and the die. For high stroke rates, the strain rate developed in the work-piece can be very high. Therefore, the material modeling must include the dynamic effects.For the modeling part, we propose an elastic-viscoplastic material model combined with a non-linear isotropic damage evolution law based on the theory of the continuum damage mechanics. Our proposed modeling is valid for a wide range of strain rates and temperatures. Finite Element simulations, using the commercial code ABAQUS/Explicit, of the blanking process are then conducted and the results are compared to the experimental investigations. The predicted cut edge of the blanked part and the punch-force displacement curves are discussed as function of the process parameters. The evolution of the shape errors (roll-over depth, fracture depth, shearing depth, and burr formation) as function of the punch-die clearance, the punch and the die wear, and the contact punch/die/blank-holder are presented. A discussion on the different stages of the blanking process as function of the processing parameters is given. The predicted results of the blanking dependence on strain-rate and temperature using our modeling are presented (for the plasticity and damage). The comparison our model results with the experimental ones shows a good agreement.

Finite Element Simulation of Blanking Process

Directory of Open Access Journals (Sweden)

Afzal Ahmed

2012-10-01

Full Text Available ABSTRACT: The blanking process can be simulated by ABAQUS v 6.4 to select punch, die and press and ascertain punch wear and bur height. The experimental and the simulation results agree well with rising punch force up to the point of creation of crack. For a 2mm mild steel sheet, the simulation shows that for the punch force of 240 kN, the crack starts at 30% punch penetration depth and punch force suddenly drops to a value of 70 kN and remains steady till the blanking is complete. Comparing simulation and experimental results for a 3mm mild steel sheet, results agree well in the elastic range with the punch force rising up to point of crack creation. However, a discrepancy appears in punch force which increases with punch penetration. At 32% depth of penetration, the discrepancy is 12 % which increases to 60 % at punch penetration of 42%. Punch force for experimental and simulation results remains about 90kN beyond punch penetration of 62%. Also, increase of the thickness of sheet results in reduced crack height and improved quality of blank.ABSTRAK: Proses pengosongan boleh disimulasikan oleh ABAQUS versi 6.4 untuk memilih tebuk, alat dan tekan; dan menentukan haus tebuk dan ketinggian duri. Keputusan ujikaji dan simulasi adalah serupa dengan kenaikan daya tebuk hingga titik retakan diperolehi. Bagi kepingan keluli ringan 2mm simulasi menunjukkan bahawa untuk tenaga tebukan sebanyak 240 kN, retak bermula pada 30% kedalaman penembusan 30% tebukan dan daya tebuk tiba-tiba jatuh kepada 70 kN dan jumplah ini kekal sehingga proses pengosongan selesai.  Apabila hasil simulasi dan eksperimen dibandingkan, keputusan experimen untuk keluli lembut 3mm, bersetuju dengan baik dalam julat anjal dan daya tebukan meningkat sehingga titik penciptaan retak diperolehi. Walau bagaimanapun percanggahan muncul apabila daya tebukan meningkat dengan daya penembusan. Pada kedalaman penembusan 32% percanggahan adalah 12% dan nilai ini meningkat kepada 60% apabila

Ion beam deposition system for depositing low defect density extreme ultraviolet mask blanks

Science.gov (United States)

Jindal, V.; Kearney, P.; Sohn, J.; Harris-Jones, J.; John, A.; Godwin, M.; Antohe, A.; Teki, R.; Ma, A.; Goodwin, F.; Weaver, A.; Teora, P.

2012-03-01

Extreme ultraviolet lithography (EUVL) is the leading next-generation lithography (NGL) technology to succeed optical lithography at the 22 nm node and beyond. EUVL requires a low defect density reflective mask blank, which is considered to be one of the top two critical technology gaps for commercialization of the technology. At the SEMATECH Mask Blank Development Center (MBDC), research on defect reduction in EUV mask blanks is being pursued using the Veeco Nexus deposition tool. The defect performance of this tool is one of the factors limiting the availability of defect-free EUVL mask blanks. SEMATECH identified the key components in the ion beam deposition system that is currently impeding the reduction of defect density and the yield of EUV mask blanks. SEMATECH's current research is focused on in-house tool components to reduce their contributions to mask blank defects. SEMATECH is also working closely with the supplier to incorporate this learning into a next-generation deposition tool. This paper will describe requirements for the next-generation tool that are essential to realize low defect density EUV mask blanks. The goal of our work is to enable model-based predictions of defect performance and defect improvement for targeted process improvement and component learning to feed into the new deposition tool design. This paper will also highlight the defect reduction resulting from process improvements and the restrictions inherent in the current tool geometry and components that are an impediment to meeting HVM quality EUV mask blanks will be outlined.

PULSED MODE LASER CUTTING OF SHEETS FOR TAILORED BLANKS

DEFF Research Database (Denmark)

Bagger, Claus; Olsen, Flemming Ove

1999-01-01

This paper describes how the laser cutting process can be optimised in such a way that the cut sheets can subsequently be used to laser weld tailored blanks. In a number of systematic laboratory experiments the effect of cutting speed, assist gas pressure, average laser power and pulse energy...... item for parameter optimisation of laser cut sheets used for tailored blanks. It was concluded that high quality cut edges with a squareness as small as 0.015 mm may be obtained. Such edges are well suited for subsequent laser welding....... was analysed. For quality assessment the squareness, roughness and dross attachment of laser cut blanks were measured. In all tests, the medium strength steel GA 260 with a thickness of 1.8 mm was used. In this work it has been successfully demonstrated that the squareness of a cut can be used as a quality...

Self-administered semiquantitative food frequency questionnaires: patterns, predictors, and interpretation of omitted items

Science.gov (United States)

Michels, Karin B.; Willett, Walter C.

2013-01-01

Background Food items on a self-administered food frequency questionnaire (FFQ) may be left blank because the food was not consumed, because of difficulties remembering the frequency or amount of intake, or due to an oversight. Methods We explored the predictors and frequency of consumption of omitted food items on an FFQ used in the Nurses’ Health Study II. Of 87,676 women who returned a mailed 147-item FFQ in 1999, 34% completed the entire questionnaire, whereas 66% left at least 1 food item blank. Ten or more foods were omitted by 5% of participants. Foods were more likely omitted by women who were older, more physically active, and had more children. We resurveyed 2876 participants who had left between 1 and 70 food items blank and asked them to fill in the blanks. Overall, 2485 participants provided complete responses. Results In the resurvey, 64% of the formerly omitted foods were marked as consumed never or less than once per month, 20% as 1–3 times per month, 8% as once per week, and 9% as more than once per week. Commonly consumed foods and beverages were less likely omitted because they were not consumed than rarely consumed foods. The best estimate for the true intake value of an omitted food was 0.82 times the average population intake. Conclusions When calculating nutrient intake, the assumption that items missing represent zero intake is reasonable. However, foods consumed more often in the population at large are less likely than rarely consumed foods to be left blank because they were not consumed. PMID:19106799

Theoretical Analysis on Mechanical Deformation of Membrane-Based Photomask Blanks

Science.gov (United States)

Marumoto, Kenji; Aya, Sunao; Yabe, Hedeki; Okada, Tatsunori; Sumitani, Hiroaki

2012-04-01

Membrane-based photomask is used in proximity X-ray lithography including that in LIGA (Lithographie, Galvanoformung und Abformung) process, and near-field photolithography. In this article, out-of-plane deformation (OPD) and in-plane displacement (IPD) of membrane-based photomask blanks are theoretically analyzed to obtain the mask blanks with flat front surface and low stress absorber film. First, we derived the equations of OPD and IPD for the processing steps of membrane-based photomask such as film deposition, back-etching and bonding, using a theory of symmetrical bending of circular plates with a coaxial circular hole and that of deformation of cylinder under hydrostatic pressure. The validity of the equations was proved by comparing the calculation results with experimental ones. Using these equations, we investigated the relation between the geometry of the mask blanks and the distortions generally, and gave the criterion to attain the flat front surface. Moreover, the absorber stress-bias required to obtain zero-stress on finished mask blanks was also calculated and it has been found that only little stress-bias was required for adequate hole size of support plate.

Deep Drawing of High-Strength Tailored Blanks by Using Tailored Tools

Directory of Open Access Journals (Sweden)

Thomas Mennecart

2016-01-01

Full Text Available In most forming processes based on tailored blanks, the tool material remains the same as that of sheet metal blanks without tailored properties. A novel concept of lightweight construction for deep drawing tools is presented in this work to improve the forming behavior of tailored blanks. The investigations presented here deal with the forming of tailored blanks of dissimilar strengths using tailored dies made of two different materials. In the area of the steel blank with higher strength, typical tool steel is used. In the area of the low-strength steel, a hybrid tool made out of a polymer and a fiber-reinforced surface replaces the steel half. Cylindrical cups of DP600/HX300LAD are formed and analyzed regarding their formability. The use of two different halves of tool materials shows improved blank thickness distribution, weld-line movement and pressure distribution compared to the use of two steel halves. An improvement in strain distribution is also observed by the inclusion of springs in the polymer side of tools, which is implemented to control the material flow in the die. Furthermore, a reduction in tool weight of approximately 75% can be achieved by using this technique. An accurate finite element modeling strategy is developed to analyze the problem numerically and is verified experimentally for the cylindrical cup. This strategy is then applied to investigate the thickness distribution and weld-line movement for a complex geometry, and its transferability is validated. The inclusion of springs in the hybrid tool leads to better material flow, which results in reduction of weld-line movement by around 60%, leading to more uniform thickness distribution.

Process Design of Aluminum Tailor Heat Treated Blanks

Directory of Open Access Journals (Sweden)

Alexander Kahrimanidis

2015-12-01

Full Text Available In many industrials field, especially in the automotive sector, there is a trend toward lightweight constructions in order to reduce the weight and thereby the CO2 and NOx emissions of the products. An auspicious approach within this context is the substitution of conventional deep drawing steel by precipitation hardenable aluminum alloys. However, based on the low formability, the application for complex stamping parts is challenging. Therefore, at the Institute of Manufacturing Technology, an innovative technology to enhance the forming limit of these lightweight materials was invented. The key idea of the so-called Tailor Heat Treated Blanks (THTB is optimization of the mechanical properties by local heat treatment before the forming operation. An accurate description of material properties is crucial to predict the forming behavior of tailor heat treated blanks by simulation. Therefore, within in this research project, a holistic approach for the design of the THTB process in dependency of the main influencing parameters is presented and discussed in detail. The capability of the approach for the process development of complex forming operations is demonstrated by a comparison of local blank thickness of a tailgate with the corresponding results from simulation.

Topical erythromycin vs blank vehicle in a multiclinic acne study.

Science.gov (United States)

Jones, E L; Crumley, A F

1981-09-01

A stable solution of erythromycin was developed using a vehicle of ethanol, propylene glycol, and citric acid buffer. In a controlled, randomized, double-blind comparison, a 2% solution of erythromycin applied to moderately severe facial acne was found to be superior to the blank vehicle in reducing the number of inflamed papules. During a period of 12 weeks, such papules were reduced by 56% in the erythromycin group, compared with 33% in the blank vehicle group. In the erythromycin group, 62% of the subjects had a good or excellent response, compared with 27% of those in the blank vehicle group. Adverse effects were similar in type in both groups and included redness, scaling, dryness, oiliness, burning, itching, and irritation of the eyes. No allergic reactions or skin infections were encountered.

Optimization of blanking process using neural network simulation

International Nuclear Information System (INIS)

Hambli, R.

2005-01-01

The present work describes a methodology using the finite element method and neural network simulation in order to predict the optimum punch-die clearance during sheet metal blanking processes. A damage model is used in order to describe crack initiation and propagation into the sheet. The proposed approach combines predictive finite element and neural network modeling of the leading blanking parameters. Numerical results obtained by finite element computation including damage and fracture modeling were utilized to train the developed simulation environment based on back propagation neural network modeling. The comparative study between the numerical results and the experimental ones shows the good agreement. (author)

Die rol van die blanke werker in die motivering van die swart werker

Directory of Open Access Journals (Sweden)

G. J. Oosthuizen

1980-11-01

Opsomming Die motivering van die Swart werker kan nie in die huidige situasie in isolasie bestudeer word nie, omdat die Blanke werker steeds in die bestuursposisie is en daarom die motivering van die Swart werker kan beïnvloed. Hierdie ondersoek was daarop gerig om die rol van die Blanke werker in die motivering van die Swart werker nader te ondersoek. Die houding en die leierskapsbenadering van die Blanke werker teenoor die Swart werker is gemeet, asook die behoeftes wat volgens die Blanke werker by die Swart werker bestaan, bevredig is, of nie bestaan nie. Die behoeftes van Swart werkers, soos deur hulleself gesien, is ook ondersoek. Ten opsigte van sekere aspekte is beduidende verskille gevind.

Dogs can discriminate human smiling faces from blank expressions.

Science.gov (United States)

Nagasawa, Miho; Murai, Kensuke; Mogi, Kazutaka; Kikusui, Takefumi

2011-07-01

Dogs have a unique ability to understand visual cues from humans. We investigated whether dogs can discriminate between human facial expressions. Photographs of human faces were used to test nine pet dogs in two-choice discrimination tasks. The training phases involved each dog learning to discriminate between a set of photographs of their owner's smiling and blank face. Of the nine dogs, five fulfilled these criteria and were selected for test sessions. In the test phase, 10 sets of photographs of the owner's smiling and blank face, which had previously not been seen by the dog, were presented. The dogs selected the owner's smiling face significantly more often than expected by chance. In subsequent tests, 10 sets of smiling and blank face photographs of 20 persons unfamiliar to the dogs were presented (10 males and 10 females). There was no statistical difference between the accuracy in the case of the owners and that in the case of unfamiliar persons with the same gender as the owner. However, the accuracy was significantly lower in the case of unfamiliar persons of the opposite gender to that of the owner, than with the owners themselves. These results suggest that dogs can learn to discriminate human smiling faces from blank faces by looking at photographs. Although it remains unclear whether dogs have human-like systems for visual processing of human facial expressions, the ability to learn to discriminate human facial expressions may have helped dogs adapt to human society.

Blank Field Sources in the ROSAT HRI Brera Multiscale Wavelet catalog

OpenAIRE

Chieregato, M.; Campana, S.; Treves, A.; Moretti, A.; Mignani, R. P.; Tagliaferri, G.

2005-01-01

The search for Blank Field Sources (BFS), i.e. X-ray sources without optical counterparts, paves the way to the identification of unusual objects in the X-ray sky. Here we present four BFS detected in the Brera Multiscale Wavelet catalog of ROSAT HRI observations. This sample has been selected on the basis of source brightness, distance from possible counterparts at other wavelengths, point-like shape and good estimate of the X-ray flux (f_X). The observed f_X and the limiting magnitude of th...

ZERODUR 4-m blank surviving up to 20 g acceleration

Science.gov (United States)

Westerhoff, Thomas; Werner, Thomas; Gehindy, Thorsten

2017-09-01

The glass ceramic ZERODUR developed as astronomical telescope mirror substrate material has been widely used in many telescopes due to its excellent small coefficient of thermal expansion. Many large and medium sized mirror substrate blanks have been delivered in the almost 50 years of ZERODUR business so far. Packaging and transportation of mirror substrates of 4 to 8 m in diameter with a weight between 3 and 20 tons requires special attention and sophisticated skills to successful deliver the blanks to their destination at polishing shops all over the world. Typically, a combination of road and sea transport needs to be organized. The requirements on the transport container are depending on the transport route and may vary from destination to destination. In any case the container needs to be able to sufficiently support the multi ton ZERODUR blank to avoid breaking under gravity. Additionally, the configuration needs to be able to absorb shocks happening during transport and loading between truck trailer and ship. For insurance reasons the transport container is always equipped with a GPS trackable shock recorder allowing to download the recorded accelerations on the container and the blank throughout the entire journey. This paper reports on the event of a 4 m class ZERODUR blank exposed to shocks up to 20 g during transport. The event will be discussed in detail together with lessons learned to avoid such events for future transports. Additionally, the 20 g acceleration will be discussed in respect to the data on bending strength for ZERODUR ground surfaces reported in numerous papers by Peter Hartmann et.al. in the last couple of years.

Investigation into high-frequency-vibration assisted micro-blanking of pure copper foils

Directory of Open Access Journals (Sweden)

Wang Chunju

2015-01-01

Full Text Available The difficulties encountered during the manufacture of microparts are often associated with size effects relating to material, process and tooling. Utilizing acoustoplastic softening, achieved through a high-frequency vibration assisted micro-blanking process, was introduced to improve the surface finish in micro-blanking. A frequency of 1.0 kHz was chosen to activate the longitudinal vibration mode of the horn tip, using a piezoelectric actuator. A square hole with dimensions of 0.5 mm × 0.5 mm was made, successfully, from a commercial rolled T2 copper foil with 100 μm in thickness. It was found that the maximum blanking force could be reduced by 5% through utilizing the high-frequency vibration. Proportion of the smooth, burnished area in the cut cross-section increases with an increase of the plasticity to fracture, under the high-frequency vibration, which suggests that the vibration introduced is helpful for inhibiting evolution of the crack due to its acoustoplastic softening effect. During blanking, roughness of the burnished surface could be reduced by increasing the vibration amplitude of the punch, which played a role as surface polishing. The results obtained suggest that the high-frequency vibration can be adopted in micro-blanking in order to improve quality of the microparts.

Attenuated phase-shift mask (PSM) blanks for flat panel display

Science.gov (United States)

Kageyama, Kagehiro; Mochizuki, Satoru; Yamakawa, Hiroyuki; Uchida, Shigeru

2015-10-01

The fine pattern exposure techniques are required for Flat Panel display applications as smart phone, tablet PC recently. The attenuated phase shift masks (PSM) are being used for ArF and KrF photomask lithography technique for high end pattern Semiconductor applications. We developed CrOx based large size PSM blanks that has good uniformity on optical characteristics for FPD applications. We report the basic optical characteristics and uniformity, stability data of large sized CrOx PSM blanks.

Tool life equation for blanking 18-8 stainless steel strips

International Nuclear Information System (INIS)

Faura, F.; Lopez, J.; Sanes, J.; Garcia, A.

1998-01-01

Hereinafter it is presented a model for the behaviour and life of circular blanking tool used in sheet forming processes of 18-8 stainless steel (sheet thickness: 1 mm). Frostily it has analyzed the different studies that have previously dealt with this problem. Secondly taking into account recently made experiments, it is proposed a simple formulation to predict tool life with enough reliability. to this purpose it has examined different parameters in the wear process, inferring from these the fundamental parameters that regulate them and about which the different equations have been configurated. Blanking tests were performed using a 20 t press at a speed of 150 strokes/min. Punch materials used in these test were AISI A2 and AISI D2 with diameters between 1.5 and 10 mm. The blanking tests were performed at a clearance between 5 and 20% of the work material thickness. (Author) 8 refs

Enabling high speed friction stir welding of aluminum tailor welded blanks

Science.gov (United States)

Hovanski, Yuri

Current welding technologies for production of aluminum tailor-welded blanks (TWBs) are utilized in low-volume and niche applications, and have yet to be scaled for the high-volume vehicle market. This study targeted further weight reduction, part reduction, and cost savings by enabling tailor-welded blank technology for aluminum alloys at high-volumes. While friction stir welding (FSW) has traditionally been applied at linear velocities less than one meter per minute, high volume production applications demand the process be extended to higher velocities more amenable to cost sensitive production environments. Unfortunately, weld parameters and performance developed and characterized at low to moderate welding velocities do not directly translate to high speed linear friction stir welding. Therefore, in order to facilitate production of high volume aluminum FSW components, parameters were developed with a minimum welding velocity of three meters per minute. With an emphasis on weld quality, welded blanks were evaluated for post-weld formability using a combination of numerical and experimental methods. Evaluation across scales was ultimately validated by stamping full-size production door inner panels made from dissimilar thickness aluminum tailor-welded blanks, which provided validation of the numerical and experimental analysis of laboratory scale tests.

Tailor-made blanks for the aircraft industry

NARCIS (Netherlands)

Zad Poor, A.A.

2010-01-01

Tailor-Made Blanks (TMBs) are hybrid assemblies made of sheet metals with different materials and/or thicknesses that are joined together prior to forming. Alternatively, a monolithic sheet can be machined to create required thickness variations (machined TMBs). The possibility of having several

Production of the 4.1-m Zerodur mirror blank for the VISTA Telescope

Science.gov (United States)

Doehring, Thorsten; Jedamzik, Ralf; Wittmer, Volker; Thomas, Armin

2004-09-01

VISTA (Visible and Infrared Survey Telescope for Astronomy) is designed to be the world's largest wide field telescope. After finishing of the construction the telescope will be part of ESO and located in Chile close to the VLT observatory at Cerro Paranal. In November 2001 SCHOTT was selected by the VISTA project office at the Royal Observatory of Edinburgh to deliver the 4.1 m diameter primary mirror blank. The manufacturing of the mirror blank made from the zero expansion material Zerodur was challenging especially due to the f/1 design. Several tons of the glass ceramic material were removed during the grinding operation. A meniscus blank with a diameter of 4100 mm and a thickness of 171.5 mm was generated, having a large central hole of 1200 mm and an aspherical shape of the concave surface. Also the handling and turning operations needed special effort and were performed by a skilled team. This paper presents details and pictures of the corresponding production and inspection sequence at SCHOTT. The geometrical parameters were measured during manufacturing by help of a laser tracker system and the achieved parameters were compared with the initial technical specification. The final quality inspection verified the excellent quality of the mirror blank. The close co-operation between the astronomers and industry resulted in a project management without problems. In April 2003 the VISTA blank was delivered successfully within a ceremony dedicated to the anniversary of "100 years of astronomical mirror blanks from SCHOTT."

Thermo-mechanical simulation and parameters optimization for beam blank continuous casting

International Nuclear Information System (INIS)

Chen, W.; Zhang, Y.Z.; Zhang, C.J.; Zhu, L.G.; Lu, W.G.; Wang, B.X.; Ma, J.H.

2009-01-01

The objective of this work is to optimize the process parameters of beam blank continuous casting in order to ensure high quality and productivity. A transient thermo-mechanical finite element model is developed to compute the temperature and stress profile in beam blank continuous casting. By comparing the calculated data with the metallurgical constraints, the key factors causing defects of beam blank can be found out. Then based on the subproblem approximation method, an optimization program is developed to search out the optimum cooling parameters. Those optimum parameters can make it possible to run the caster at its maximum productivity, minimum cost and to reduce the defects. Now, online verifying of this optimization project has been put in practice, which can prove that it is very useful to control the actual production

Lubricant test for punching and blanking

DEFF Research Database (Denmark)

Olsson, David Dam; Bay, Niels; Andreasen, Jan Lasson

2003-01-01

Punching/blanking is one of the tribologically wise most severe metal forming processes.Insu $cient lubrication leads to heavy pick-up of work piece material on the punch stem,bad tolerances and eventual breakdown of the punch due to excessive backstroke force,especially in case of tribologically...... of alternative lubricants the present paper describes a new lubricant test for punching....

Factorial composition of the Aggression Questionnaire: a multi-sample study in Greek adults.

Science.gov (United States)

Vitoratou, Silia; Ntzoufras, Ioannis; Smyrnis, Nikolaos; Stefanis, Nicholas C

2009-06-30

The primary aim of the current article was the evaluation of the factorial composition of the Aggression Questionnaire (AQ(29)) in the Greek population. The translated questionnaire was administered to the following three heterogeneous adult samples: a general population sample from Athens, a sample of young male conscripts and a sample of individuals facing problems related to substance use. Factor analysis highlighted a structure similar to the one proposed by Buss and Perry [Buss, A.F., Perry, M., 1992. The Aggression Questionnaire. Journal of Personality and Social Psychology 63, 452-459]. However, the refined 12-item version of Bryant and Smith [Bryant, F.B., Smith, B.D., 2001. Refining the architecture of aggression: a measurement model for the Buss-Perry Aggression Questionnaire. Journal of Research in Personality 35, 138-167] provided a better fit to our data. Therefore, the refined model was implemented in further analysis. Multiple group confirmatory factor analysis was applied in order to assess the variability of the 12-item AQ across gender and samples. The percentage of factor loading invariance between males and females and across the three samples defined above was high (higher than 75%). The reliability (internal consistency) of the scale was satisfactory in all cases. Content validity of the 12-item AQ was confirmed by comparison with the Symptom Check-List 90 Revised.

Attentional Lapses in Attention-Deficit/Hyperactivity Disorder: Blank Rather Than Wandering Thoughts.

Science.gov (United States)

Van den Driessche, Charlotte; Bastian, Mikaël; Peyre, Hugo; Stordeur, Coline; Acquaviva, Éric; Bahadori, Sara; Delorme, Richard; Sackur, Jérôme

2017-10-01

People with attention-deficit/hyperactivity disorder (ADHD) have difficulties sustaining their attention on external tasks. Such attentional lapses have often been characterized as the simple opposite of external sustained attention, but the different types of attentional lapses, and the subjective experiences to which they correspond, remain unspecified. In this study, we showed that unmedicated children (ages 6-12) with ADHD, when probed during a standard go/no-go task, reported more mind blanking (a mental state characterized by the absence of reportable content) than did control participants. This increase in mind blanking happened at the expense of both focused and wandering thoughts. We also found that methylphenidate reverted the level of mind blanking to baseline (i.e., the level of mind blanking reported by control children without ADHD). However, this restoration led to mind wandering more than to focused attention. In a second experiment, we extended these findings to adults who had subclinical ADHD. These results suggest that executive functions impaired in ADHD are required not only to sustain external attention but also to maintain an internal train of thought.

Application of Hard Coatings for Improved Tribological Performance of Blanking and Piercing Tools

DEFF Research Database (Denmark)

Podgornik, B.; Zajec, B.; Bay, Niels

2010-01-01

The aim of the present investigation was to examine the possibility of reducing lubrication and replacing expensive tungsten carbide material in blanking/piercing through introduction of hard tool coatings. Results show that hard PVD coatings can be successfully used in blanking/piercing applicat...

The negative affect repair questionnaire: factor analysis and psychometric evaluation in three samples

Directory of Open Access Journals (Sweden)

Scherer Anne

2013-01-01

Full Text Available Abstract Background Negative affect and difficulties in its regulation have been connected to several adverse psychological consequences. While several questionnaires exist, it would be important to have a theory-based measure that includes clinically relevant items and shows good psychometric properties in healthy and patient samples. This study aims at developing such a questionnaire, combining the two Gross [1] scales Reappraisal and Suppression with an additional response-focused scale called Externalizing Behavioral Strategies covering clinically relevant items. Methods The samples consisted of 684 students (mean age = 23.3, SD = 3.5; 53.6% female and 369 persons with mixed mental disorders (mean age = 36.0 SD = 14.6; 71.2% female. Items for the questionnaire were derived from existing questionnaires and additional items were formulated based on suggestions by clinical experts. All items start with “When I don’t feel well, in order to feel better…”. Participants rated how frequently they used each strategy on a 5-point Likert scale. Confirmatory Factor Analyses were conducted to verify the factor structure in two separate student samples and a clinical sample. Group comparisons and correlations with other questionnaires were calculated to ensure validity. Results After modification, the CFA showed good model fit in all three samples. Reliability scores (Cronbach’s α for the three NARQ scales ranged between .71 and .80. Comparisons between students and persons with mental disorders showed the postulated relationships, as did comparisons between male and female students and persons with or without Borderline Personality Disorder. Correlations with other questionnaires suggest the NARQ’s construct validity. Conclusions The results indicate that the NARQ is a psychometrically sound and reliable measure with practical use for therapy planning and tracking of treatment outcome across time. We advocate the integration

A Meta-Analysis of Questionnaire Response Rates in Military Samples

National Research Council Canada - National Science Library

Parrish, Michael R

2007-01-01

...), use of advance notices, and use of follow-up reminders. Data were gathered for a meta-analysis of 73 previously published studies which utilized a survey or questionnaire to collect data from a military-only sample...

High Speed Blanking: An Experimental Method to Measure Induced Cutting Forces

OpenAIRE

GAUDILLIERE , Camille; Ranc , Nicolas; LARUE , Arnaud; MAILLARD , A; Lorong , Philippe

2013-01-01

Lien vers la version éditeur: http://link.springer.com/article/10.1007/s11340-013-9738-1; International audience; A new blanking process that involves punch speed up to 10 ms −1 has obvious advantages in increased productivity. However, the inherent dynamics of such a process makes it difficult to develop a practical high speed punch press. The fracture phenomenon governing the blanking process has to be well understood to correctly design the machine support and the tooling. To observe this ...

Lithographic qualification of high-transmission mask blank for 10nm node and beyond

Science.gov (United States)

Xu, Yongan; Faure, Tom; Viswanathan, Ramya; Lobb, Granger; Wistrom, Richard; Burns, Sean; Hu, Lin; Graur, Ioana; Bleiman, Ben; Fischer, Dan; Mignot, Yann; Sakamoto, Yoshifumi; Toda, Yusuke; Bolton, John; Bailey, Todd; Felix, Nelson; Arnold, John; Colburn, Matthew

2016-04-01

In this paper, we discuss the lithographic qualification of high transmission (High T) mask for Via and contact hole applications in 10nm node and beyond. First, the simulated MEEF and depth of focus (DoF) data are compared between the 6% and High T attnPSM masks with the transmission of High T mask blank varying from 12% to 20%. The 12% High T blank shows significantly better MEEF and larger DoF than those of 6% attnPSM mask blank, which are consistent with our wafer data. However, the simulations show no obvious advantage in MEEF and DoF when the blank transmittance is larger than 12%. From our wafer data, it has been seen that the common process window from High T mask is 40nm bigger than that from the 6% attnPSM mask. In the elongated bar structure with smaller aspect ratio, 1.26, the 12% High T mask shows significantly less develop CD pull back in the major direction. Compared to the High T mask, the optimized new illumination condition for 6% attnPSM shows limited improvement in MEEF and the DoF through pitch. In addition, by using the High T mask blank, we have also investigated the SRAF printing, side lobe printing and the resist profile through cross sections, and no patterning risk has been found for manufacturing. As part of this work new 12% High T mask blank materials and processes were developed, and a brief overview of key mask technology development results have been shared. Overall, it is concluded that the High T mask, 12% transmission, provides the most robust and extendable lithographic solution for 10nm node and beyond.

Exploring Valued-Added Options - Edge-Glued Panels and Blanks Offer Value-Added Opportunities

Science.gov (United States)

Bob Smith; Philip A. Araman

1997-01-01

As sawmills search for new opportunities to add value to rough sawn lumber, many consider producing dimension parts as one solution. Assembling dimension parts into edge-glued panels or standard blanks can add even further value. Blanks are defined as pieces of solid wood (which may be edge-glued) that are manufactured to a predetermined size. This article discusses...

Three-dimensional characterization of extreme ultraviolet mask blank defects by interference contrast photoemission electron microscopy.

Science.gov (United States)

Lin, Jingquan; Weber, Nils; Escher, Matthias; Maul, Jochen; Han, Hak-Seung; Merkel, Michael; Wurm, Stefan; Schönhense, Gerd; Kleineberg, Ulf

2008-09-29

A photoemission electron microscope based on a new contrast mechanism "interference contrast" is applied to characterize extreme ultraviolet lithography mask blank defects. Inspection results show that positioning of interference destructive condition (node of standing wave field) on surface of multilayer in the local region of a phase defect is necessary to obtain best visibility of the defect on mask blank. A comparative experiment reveals superiority of the interference contrast photoemission electron microscope (Extreme UV illumination) over a topographic contrast one (UV illumination with Hg discharge lamp) in detecting extreme ultraviolet mask blank phase defects. A depth-resolved detection of a mask blank defect, either by measuring anti-node peak shift in the EUV-PEEM image under varying inspection wavelength condition or by counting interference fringes with a fixed illumination wavelength, is discussed.

Adaptation of the Athlete Burnout Questionnaire in a Spanish sample of athletes.

Science.gov (United States)

Arce, Constantino; De Francisco, Cristina; Andrade, Elena; Seoane, Gloria; Raedeke, Thomas

2012-11-01

In this paper, we offer a general version of the Spanish adaptation of Athlete Burnout Questionnaire (ABQ) designed to measure the syndrome of burnout in athletes of different sports. In previous works, the Spanish version of ABQ was administered to different samples of soccer players. Its psychometric properties were appropriate and similar to the findings in original ABQ. The purpose of this study was to examine the generalization to others sports of the Spanish adaptation. We started from this adaptation, but we included three alternative statements (one for each dimension of the questionnaire), and we replaced the word "soccer" with the word "sport". An 18-item version was administered to a sample of 487 athletes aged 13 and 29 years old. Confirmatory factor analyses replicated the factor structure, but two items modification were necessary in order to obtain a good overall fit of the model. The internal consistency and test-retest reliability of the questionnaire were satisfactory.

Failure Analysis of a Sheet Metal Blanking Process Based on Damage Coupling Model

Science.gov (United States)

Wen, Y.; Chen, Z. H.; Zang, Y.

2013-11-01

In this paper, a blanking process of sheet metal is studied by the methods of numerical simulation and experimental observation. The effects of varying technological parameters related to the quality of products are investigated. An elastoplastic constitutive equation accounting for isotropic ductile damage is implemented into the finite element code ABAQUS with a user-defined material subroutine UMAT. The simulations of the damage evolution and ductile fracture in a sheet metal blanking process have been carried out by the FEM. In order to guarantee computation accuracy and avoid numerical divergence during large plastic deformation, a specified remeshing technique is successively applied when severe element distortion occurs. In the simulation, the evolutions of damage at different stage of the blanking process have been evaluated and the distributions of damage obtained from simulation are in proper agreement with the experimental results.

High-Speed Friction-Stir Welding to Enable Aluminum Tailor-Welded Blanks

Science.gov (United States)

Hovanski, Yuri; Upadhyay, Piyush; Carsley, John; Luzanski, Tom; Carlson, Blair; Eisenmenger, Mark; Soulami, Ayoub; Marshall, Dustin; Landino, Brandon; Hartfield-Wunsch, Susan

2015-05-01

Current welding technologies for production of aluminum tailor-welded blanks (TWBs) are utilized in low-volume and niche applications, and they have yet to be scaled for the high-volume vehicle market. This study targeted further weight reduction, part reduction, and cost savings by enabling tailor-welded blank technology for aluminum alloys at high volumes. While friction-stir welding (FSW) has been traditionally applied at linear velocities less than 1 m/min, high-volume production applications demand the process be extended to higher velocities more amenable to cost-sensitive production environments. Unfortunately, weld parameters and performance developed and characterized at low-to-moderate welding velocities do not directly translate to high-speed linear FSW. Therefore, to facilitate production of high-volume aluminum FSW components, parameters were developed with a minimum welding velocity of 3 m/min. With an emphasis on weld quality, welded blanks were evaluated for postweld formability using a combination of numerical and experimental methods. An evaluation across scales was ultimately validated by stamping full-size production door inner panels made from dissimilar thickness aluminum TWBs, which provided validation of the numerical and experimental analysis of laboratory-scale tests.

FSW of Aluminum Tailor Welded Blanks across Machine Platforms

Energy Technology Data Exchange (ETDEWEB)

Hovanski, Yuri; Upadhyay, Piyush; Carlson, Blair; Szymanski, Robert; Luzanski, Tom; Marshall, Dustin

2015-02-16

Development and characterization of friction stir welded aluminum tailor welded blanks was successfully carried out on three separate machine platforms. Each was a commercially available, gantry style, multi-axis machine designed specifically for friction stir welding. Weld parameters were developed to support high volume production of dissimilar thickness aluminum tailor welded blanks at speeds of 3 m/min and greater. Parameters originally developed on an ultra-high stiffness servo driven machine where first transferred to a high stiffness servo-hydraulic friction stir welding machine, and subsequently transferred to a purpose built machine designed to accommodate thin sheet aluminum welding. The inherent beam stiffness, bearing compliance, and control system for each machine were distinctly unique, which posed specific challenges in transferring welding parameters across machine platforms. This work documents the challenges imposed by successfully transferring weld parameters from machine to machine, produced from different manufacturers and with unique control systems and interfaces.

Experimental evaluation of the detection threshold of uranium in urine samples

International Nuclear Information System (INIS)

Ferreyra, M. D.; Suarez Mendez, Sebastian; Tossi, Mirta H.

1999-01-01

The routine internal dosimetric tests for nuclear installations workers includes the determination of uranium in urine. The analysis is carried out, after chemical treatment, by UV fluorometry, comparing the results with urine blank samples from workers not exposed professionally to contamination. The fluctuation of the results of the uranium content in the blank samples greatly affects the determinations. In 30 blank samples the uranium content was determined and the results were evaluated by three calculation methods: 1) The procedure recommended by IUPAC; 2) The graphical method; 3) and The error propagation method. The last one has been adopted for the calculation of the detection threshold. (authors)

The patient's safety - For a dynamics of improvement. Nr 2. The 'blank' first session

International Nuclear Information System (INIS)

2011-11-01

This publication addresses the stakes associated with the first radiotherapy session which is commonly called the 'blank' session. After some figures concerning radiotherapy patients and event declarations, it analyses 13 of these events in terms of number of sessions, location, treatment technique, and error detection (when, by whom). It evokes the consequences of events, and identifies the main causes of these events (positioning controls, work organisation, technical tools and devices). It outlines some good practices: a systematic 'blank' first session before any radiotherapy, a rigorous control of positioning, avoidance of patient repositioning errors. Some innovative techniques of imagery-guided radiotherapy are evoked. Members of radiotherapy departments outline the importance of this first 'blank' session, their own role, and successful practices

On the Determination of the Blank Shape Contour for Thin Precision Parts Obtained by Stamping

International Nuclear Information System (INIS)

Azaouzi, M.; Delameziere, A.; Naceur, H.; Batoz, J. L.; Sibaud, D.; Belouettar, S.

2007-01-01

The present study deals with the 'automatic' determination of the initial blank shape contour for 3D thin metallic precision parts obtained by stamping, knowing the 3D CAD geometry of the final part (the desired product). The forming process can involve several steps presented in this paper that consists in applying a heuristic method of optimization to find out the initial blank shape of thin precision metallic part in order to obtain a final part, with a required 3D geometry (specified). The purpose of the present approach is to replace the experimental trial and error optimization method used currently, which is expensive and time consuming. The principle of the 'heuristic' optimization method is to first estimate the blank shape using the Inverse Approach, then to compensate the shape error calculated in each node of the blank contour. The 'heuristic' optimization loop is done using a precise incremental code (Abaqus Explicit or Stampack) and, the iterations loop is stopped when the shape errors are within some initially fixed tolerances. The method is tested in the case of a special stamping process where the parts are pressed in one or more steps using a manual press, without blank holder and by the mean of tools having complex shape. The sensitivities of the process parameters regarding the optimal solution are investigated

Summary and evaluation of pesticides in field blanks collected for the National Water-Quality Assessment Program, 1992-95

Science.gov (United States)

Martin, Jeffrey D.; Gilliom, Robert J.; Schertz, Terry L.

1999-01-01

Field blanks are quality-control samples used to assess contamination in environmental water samples. Contamination is the unintentional introduction of a chemical (pesticides in this instance) into an environmental water sample from sources such as inadequately cleaned equipment, dirty hands, dust, rain, or fumes. Contamination causes a positive bias in analytical measurements that may need to be considered in the analysis and interpretation of the environmental data. Estimates of pesticide contamination in environmental water samples collected for the National Water-Quality Assessment (NAWQA) Program are used to qualify, where needed, interpretations of the occurrence and distribution of pesticides in the surface and ground waters of the United States.

17 CFR 230.419 - Offerings by blank check companies.

Science.gov (United States)

2010-04-01

... derivative securities relating to securities held in the escrow or trust account may be exercised or... other derivative securities issued in the initial offering are exercisable, there is a continuous... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Offerings by blank check...

Warm Deep Drawing of Rectangular Parts of AZ31 Magnesium Alloy Sheet Adopting Variable Blank Holder Force

International Nuclear Information System (INIS)

Peng Yinghong; Chang Qunfeng; Li Dayong; Zeng Xiaoqin

2007-01-01

AZ31 magnesium alloy sheet with good shape and formability is fabricated by warm cross rolling. Uniaxial tensile tests are conducted using a Gleeble 3500 thermal - mechanical simulator, and the mechanical properties of AZ31 magnesium alloy sheet are analyzed. A warm deep drawing process of square part is also simulated by the finite element method. The influences of blank holder force on the formability are numerically investigated. A double-action hydraulic press that can realize adjustable blank holder forces is developed and its working principle and control system are introduced. Some warm deep drawing experiments of square parts of AZ31 magnesium alloy sheet are also performed. Different variation schemes of the blank holder force with the stroke of the punch are tested, and the experiment results are compared. Results show that the suitable blank holder force variation scheme is a ladder curve with the punch stroke. Adopting the variable blank holder force technique can improve 13.2% of the drawing depth of square parts of AZ31 magnesium alloy sheet

47 CFR 73.646 - Telecommunications Service on the Vertical Blanking Interval and in the Visual Signal.

Science.gov (United States)

2010-10-01

... Blanking Interval and in the Visual Signal. 73.646 Section 73.646 Telecommunication FEDERAL COMMUNICATIONS... transmission of data, processed information, or any other communication in either a digital or analog mode. (b....646 Telecommunications Service on the Vertical Blanking Interval and in the Visual Signal. (a...

Towards automatic recognition of irregular, short-open answers in Fill-in-the-blank tests

Directory of Open Access Journals (Sweden)

Sergio A. Rojas

2014-01-01

Full Text Available Assessment of student knowledge in Learning Management Systems such as Moodle is mostly conducted using close-ended questions (e.g. multiple-choice whose answers are straightforward to grade without human intervention. FILL-IN-THE-BLANK tests are usually more challenging since they require test-takers to recall concepts and associations not available in the statement of the question itself (no choices or hints are given. Automatic assessment of the latter currently requires the test-taker to give a verbatim answer, that is, free of spelling or typographical mistakes. In this paper, we consider an adapted version of a classical text-matching algorithm that may prevent wrong grading in automatic assessment of FILL-IN-THE-BLANK questions whenever irregular (similar but not exact answers occur due to such types of error. The technique was tested in two scenarios. In the first scenario, misspelled single-word answers to an Internet security questionnaire were correctly recognized within a two letter editing tolerance (achieving 99 % accuracy. The second scenario involved short-open answers to computer programming quizzes (i.e. small blocks of code requiring a structure that conforms to the syntactic rules of the programming language. Twenty-one real-world answers written up by students, taking a computer programming course, were assessed by the method. This assessment addressed the lack of precision in terms of programmer-style artifacts (such as unfamiliar variable or function nomenclature and uses an admissible tolerance of up to 20 % letter-level typos. These scores were satisfactory corroborated by a human expert. Additional findings and potential enhancements to the technique are also discussed.

Laser welding of tailored blanks

International Nuclear Information System (INIS)

Pecas, P.; Gouveia, H.; Quintino, L.; Olsen, F.O.

1998-01-01

Laser welding has an increasing role in the automotive industry, namely on the sub-assemblies manufacturing. Several sheet-shape parts are laser welded, on a dissimilar combination of thicknesses and materials, and are afterwards formed (stamped) being transformed in a vehicle body component. In this paper low carbon CO 2 laser welding, on the thicknesses of 1,25 and 0.75 mm, formability investigation is described. There will be a description of how the laser welded blanks behave in different forming tests, and the influence of misalignment and undercut on the formability. The quality is evaluated by measuring the limit strain and limit effective strain for the laser welded sheets and the base material, which will be presented in a forming limit diagram. (Author) 14 refs

Production of annular blanks for Mo-99 using natural uranium, LEU uranium, nickel and structural Al-3003 plates

International Nuclear Information System (INIS)

Lisboa, J.R.; Barrera, M.E.; Marin, J.

2010-01-01

The Tc-99m radioisotope for medical use is the one most used in nuclear medicine worldwide. In Chile the Tc-99m is applied in more than 90% of nuclear medicine studies. In order to supply the whole country with this radioisotope, in 2005-2007 the CCHEN developed its own production of Tc-99m generators from Mo-99 imported from Canada, which are prepared with the activity needed by the Chilean hospitals and clinics. As of 2007 Mo-99 was no longer imported, and since then the Tc-99m is produced only by neutron activation of the Mo. The present challenge is to produce Mo-99 by irradiating blanks that contain enriched uranium foils, with locally produced LEU. The annular blank consists of 2 concentric tubes of A1-3003 structural aluminum that, in an interior annular space, contain a LEU foil, covered on both sides by a nickel foil. This work presents the development of the production technology for annular blanks using natural uranium and U-325 enriched uranium. The structural components are made with A1-3003 aluminum alloy, the foils are 13 grams of uranium measuring 100 x 50 mm and 120-150 μ thick. The blank was assembled using a methodology to control, adapt and assemble the blank's different internal components. A foil of natural uranium and LEU uranium, and a nickel foil are included, used as a barrier for the escape of fission products. During the blank's expansion, for analysis alcohol as lubricant was used, allowing the expander to move smoothly through the inside of the blank. The blank was sealed by TIG welding with a pulsed AC current and a mixture of Ar-5% He gases. Two methods were used for the water tightness test; for high escape levels the temperature was used as a promoter of the ΔP provided by hot water and liquid nitrogen, for low escape levels high vacuum technology was used where the ΔP is provided by a high pressure helium atmosphere. The technology for the production of annular LEU blanks was achieved by applying innovations to technologies

Experimental verification of a deep drawing tool system for adaptive blank holder pressure distribution

DEFF Research Database (Denmark)

Tommerup, Søren; Endelt, Benny Ørtoft

2012-01-01

In deep drawing, the strain path in the blank during the forming process can be significantly affected by application of temporal and spatial variation of the blank holder force. In this study, an active tool system capable of controlling the distribution of the blank holder force is presented...... which can be integrated into existing stacked deep drawing tools without need for modification of the press. A working system is presented consisting of a controller, designated volume displacement cavity pressure supply units and a shimming plate. It is applied to the deep drawing of a rectangular...... to the conventional shimming method using paper or metal shims between the tool plates. The tool system’s ability to influence the material flow is investigated by performing a series of deep drawing experiments. Eight different cavity pressure schemes are applied during the punch stroke and the scheme’s effects...

Numerical investigation of blanking for metal polymer sandwich sheets

Directory of Open Access Journals (Sweden)

Gutknecht Florian

2016-01-01

Full Text Available Metal polymer sandwich sheets consist of materials with drastically different mechanical properties. Due to this fact and because of high local gradients in the cutting zone during the blanking process, traditional process strategies and empirical knowledge are difficult to apply. A finite-element simulation of the shear cutting process is used to predict the necessary force and the geometry of the cutting surface. A fully-coupled ductile damage model is used for the description of the material behaviour. This model considers the influence of shear and compression-dominated stress states on the initiation of damage. Experimental tensile and compression test data is used for the identification of material parameters. The results of the blanking simulation are compared with experimental data. Furthermore, the evolution of the stress state is analysed to gain understanding of the underlying physics. Finally this model enables the prediction of core compression and other quantities such as the acting stresses and corresponding triaxilities, which provide valuable information for the development of analytical models.

Relations among behavioral and questionnaire measures of impulsivity in a sample of suicide attempters.

Science.gov (United States)

Bagge, Courtney L; Littlefield, Andrew K; Rosellini, Anthony J; Coffey, Scott F

2013-08-01

Despite the focus on impulsivity within suicide research, it remains unclear the extent to which impulsivity assessments, that purportedly tap similar constructs, show significant overlap in samples of individuals with suicidal behaviors. In a sample of 69 suicide attempters, we took a multitrait, multimethod approach to examine the relation among various questionnaire and behavioral assessments of impulsivity facets. With the exception of urgency and go-stop performance, there was little evidence of concordance between questionnaire and behavioral measures. These findings suggest researchers cannot presume that measures of "impulsivity" assess similar psychological processes and that more nuanced terminology is needed. © 2013 The American Association of Suicidology.

Study population, questionnaire, data management and sample description

Directory of Open Access Journals (Sweden)

Chiara de Waure

2015-06-01

Full Text Available INTRODUCTION: This article describes methodological issues of the "Sportello Salute Giovani" project ("Youth Health Information Desk", a multicenter study aimed at assessing the health status and attitudes and behaviours of university students in Italy. MATERIALS AND METHODS: The questionnaire used to carry out the study was adapted from the Italian health behaviours in school-aged children (HBSC project and consisted of 93 items addressing: demographics; nutritional habits and status; physical activity; lifestyles; reproductive and preconception health; health and satisfaction of life; attitudes and behaviours toward academic study and new technologies. The questionnaire was administered to a pool of 12 000 students from 18 to 30 years of age who voluntary decided to participate during classes held at different Italian faculties or at the three "Sportello Salute Giovani" centers which were established in the three sites of the Università Cattolica del Sacro Cuore (Catholic University of the Sacred Heart of Rome. RESULTS: The final study sample was composed by 8516 university students. The mean age of responders was 22.2 (Standard Deviation 2.0 and 5702 (67.0% were females. According to the distribution in age classes, 3601 (43.3% belonged to the 18-21 one, 3796 (44.5% to the 22-24 class and 1019 (12.2% to the 25-30 class. With respect to socio-economic status, data were available for 8410 responders and showed that 50.3% of students belonged to the middle class. DISCUSSION: The project took into consideration a large number of individuals from different regions of the country and therefore may be considered representative of the general population of Italian university students. Furthermore, it is the first to address, at the same time, several issues, in particular attitudes and behaviours toward health, in Italian university students. CONCLUSION: The analysis of data from such a large sample of university students sets the basis for

Freiburg Questionnaire of linguistic pragmatics (FQLP): psychometric properties based on a psychiatric sample.

Science.gov (United States)

Riedel, Andreas; Suh, Heejung; Haser, Verena; Hermann, Ismene; Ebert, Dieter; Riemann, Dieter; Bubl, Emanuel; Tebartz van Elst, Ludger; Hölzel, Lars P

2014-12-24

Asperger's Syndrome (AS) is an autism spectrum disorder that is characterized by significant difficulties in social interaction and nonverbal communication, and restricted and repetitive patterns of behavior and interests. Difficulties with respect to pragmatic speech, reading emotional and social cues, differentiating between fact and fiction, and taking into account the influence of context on a statement are commonly described features. However, hitherto established questionnaires did not focus on these symptoms. In this study we present a short (11 questions) questionnaire which focuses on self-rated pragmatic speech abilities, the Freiburg Questionnaire of linguistic pragmatics (FQLP). Psychometric properties of the questionnaire were explored in a sample of 57 patients with Asperger's Syndrome, 66 patients with other psychiatric disorders, and a convenience sample of 56 people. Reliability analysis showed a high Cronbach's α. Strong correlations could be demonstrated for the FQLP with the Autism Quotient and the Empathy Quotient. Concerning divergent validity a moderate correlation was found between the FQLP and self-rated symptoms of personality disorders. No significant correlation was found between the FQLP and the vocabulary skills. The receiver operating characteristics curve showed an excellent diagnostic accuracy of the FQLP (.97). As the control group consisted of people without mental disorder and patients with different psychiatric disorders, the results indicate that the construct examined by the FQLP is quite specific to the peculiarities of AS. The FQLP is a reliable, brief and valid instrument. First results regarding sensitivity and specificity are highly promising.

Use of Monocrystalline Silicon as Tool Material for Highly Accurate Blanking of Thin Metal Foils

International Nuclear Information System (INIS)

Hildering, Sven; Engel, Ulf; Merklein, Marion

2011-01-01

The trend towards miniaturisation of metallic mass production components combined with increased component functionality is still unbroken. Manufacturing these components by forming and blanking offers economical and ecological advantages combined with the needed accuracy. The complexity of producing tools with geometries below 50 μm by conventional manufacturing methods becomes disproportional higher. Expensive serial finishing operations are required to achieve an adequate surface roughness combined with accurate geometry details. A novel approach for producing such tools is the use of advanced etching technologies for monocrystalline silicon that are well-established in the microsystems technology. High-precision vertical geometries with a width down to 5 μm are possible. The present study shows a novel concept using this potential for the blanking of thin copper foils with monocrystallline silicon as a tool material. A self-contained machine-tool with compact outer dimensions was designed to avoid tensile stresses in the brittle silicon punch by an accurate, careful alignment of the punch, die and metal foil. A microscopic analysis of the monocrystalline silicon punch shows appropriate properties regarding flank angle, edge geometry and surface quality for the blanking process. Using a monocrystalline silicon punch with a width of 70 μm blanking experiments on as-rolled copper foils with a thickness of 20 μm demonstrate the general applicability of this material for micro production processes.

76 FR 14697 - Aleris Blanking and Rim Products, Inc., a Division of Aleris International, Inc., Terre Haute, IN...

Science.gov (United States)

2011-03-17

... Products, Inc., a Division of Aleris International, Inc., Terre Haute, IN; Notice of Revised Determination... workers of Aleris Blanking and Rim Products, Inc., a division of Aleris International, Inc., Terre Haute... Blanking and Rim Products, Inc., a division of Aleris International, Inc., Terre Haute, Indiana, who became...

Study on the process of calibration and deep centring of blanks

International Nuclear Information System (INIS)

Potapov, I.N.; Romantsev, B.A.; Popov, V.A.; Volodin, V.V.; Goncharuk, A.V.

1985-01-01

Process of calibration and deep centring of blanks before broaching is developed and studied. Investigations are performed at a semi-industrial screw rolling mill MISiS-100 T. Blanks made of 40Kh, 60, 50, 45KhN2MFA, 30KhGSNA steels 80, 85, and 90 mm in diameter and 300 mm long were calibrated and centered after heating in a furnace to a depth of 200 mm at shafts and faces with different calibration. 30KhN2MFA steel is chosen for face material; heat treatment is conducted under the following conditions: heating up to 950-1000 deg C and hold-up during 30-35 min with the following cooling in the air. The above experimental investigations reveal that the process of calibration and deep centring accomplished at a three-shaft screw rolling mill is rather stable and provides a high accuracy of centering hollow marking

Development of high sensitivity and high speed large size blank inspection system LBIS

Science.gov (United States)

Ohara, Shinobu; Yoshida, Akinori; Hirai, Mitsuo; Kato, Takenori; Moriizumi, Koichi; Kusunose, Haruhiko

2017-07-01

The production of high-resolution flat panel displays (FPDs) for mobile phones today requires the use of high-quality large-size photomasks (LSPMs). Organic light emitting diode (OLED) displays use several transistors on each pixel for precise current control and, as such, the mask patterns for OLED displays are denser and finer than the patterns for the previous generation displays throughout the entire mask surface. It is therefore strongly demanded that mask patterns be produced with high fidelity and free of defect. To enable the production of a high quality LSPM in a short lead time, the manufacturers need a high-sensitivity high-speed mask blank inspection system that meets the requirement of advanced LSPMs. Lasertec has developed a large-size blank inspection system called LBIS, which achieves high sensitivity based on a laser-scattering technique. LBIS employs a high power laser as its inspection light source. LBIS's delivery optics, including a scanner and F-Theta scan lens, focus the light from the source linearly on the surface of the blank. Its specially-designed optics collect the light scattered by particles and defects generated during the manufacturing process, such as scratches, on the surface and guide it to photo multiplier tubes (PMTs) with high efficiency. Multiple PMTs are used on LBIS for the stable detection of scattered light, which may be distributed at various angles due to irregular shapes of defects. LBIS captures 0.3mμ PSL at a detection rate of over 99.5% with uniform sensitivity. Its inspection time is 20 minutes for a G8 blank and 35 minutes for G10. The differential interference contrast (DIC) microscope on the inspection head of LBIS captures high-contrast review images after inspection. The images are classified automatically.

High speed phototimer and biplane II blanking method in 105 mm RSC photographing of circulatory system

International Nuclear Information System (INIS)

Kaga, Yuji; Kiuchi, Shigeo; Sato, Masami; Komatsuda, Yasushi; Nishio, Kosaku.

1979-01-01

A high speed phototimer as an autoexposure mechanism was developed for 105 mm II indirect continuous photographing of circulatory system. The phototimer can give repeated response of 12 times/sec and the shortest X-ray shut out of 1 m sec. The proper lighting field for the phototimer is 7 mm diameter (12%) of the II input area, equivalent to 80 mm in diameter), and the tube voltage, object property and the focus-II distance characteristics are all well corrected to give good photographs of optimal density. The mutual fog in biplane photographing can be removed by adopting II blanking method. As blanking can respond quite rapidly, photographing time plus 2 m sec is enough for blanking time. That means the positive phase can be brought close to 3 m sec. This mechanism can be applied for biplane cine-photographing. (Kobatake, H.)

Preliminary evaluation of new polymer matrix for solid-phase extraction of nonylphenol from water samples.

Science.gov (United States)

Guerreiro, António; Soares, Ana; Piletska, Elena; Mattiasson, Bo; Piletsky, Sergey

2008-03-31

Molecularly imprinted (MIP) and blank polymers with affinity for nonylphenol were designed using computational modelling. Chromatographic tests demonstrated higher affinity of imprinted polymers towards the template nonylphenol as compared with blank polymers. The performance of both polymers in solid-phase extraction was however very similar. Both blank and imprinted polymers appeared to be suitable for the removal and pre-concentration of nonylphenol from contaminated water samples with 99% efficiency of the recovery. The commercial resins PH(EC) (Biotage) and C18 (Varian) tested in the same conditions used for comparative purposes had recovery rate <84%. The polymer capacity for nonylphenol was 231 mg g(-1) for blank and 228 mg g(-1) for MIP. The synthesised materials can have significance for sample pre-concentration and environmental analysis of this class of compounds.

n Vergelykende ondersoek na die werksmotivering van blanke en swart vakmanne in 'n chemiese bedryf

Directory of Open Access Journals (Sweden)

A. L. Barnard

1991-06-01

Opsomming Die doel met hierdie ondersoek was om met behulp van Lawler en Porter se verwagtingsmodel, vas te stel in watter mate blanke en swart vakmanne, in 'n chemiese nywerheid, hul werksomgewing as toereikend motiverend van aard beskou. Die resultate dui aan dat daar vir beide groepe nie sprake is van 'n optimaal motiverende werksomgewing nie. Terwyl blanke vakmanne ekstrinsieke faktore meer beklemtoon het, het swart vakmanne beter gebalanseerde voorkeure met betrekking tot ekstrinsieke/intrinsieke faktore getoon. Die motiveringspatrone van die twee groepe het egter nie wesenlik van mekaar verskil nie.

The Psychological Concepts in Taylor Swift's "Blank Space"

OpenAIRE

Anindhita, Novia Putri

2016-01-01

“Blank Space” is a song that is sung by a singer, Taylor Swift. The lyrics tell about the lonely woman who dates a lot but always fails to manage her relationship. However, it does not make her worry to start a new relationship. The purpose of this study is to analyze the elements of the poetry in the lyrics and to show the readers the psychological contents as portrayed in the music video. The study uses intrinsic and extrinsic theories to analyze the data and library research to compile the...

Increasing the Deep Drawability of Al-1050 Aluminum Sheet using Multi-Point Blank Holder

Directory of Open Access Journals (Sweden)

Gavas, M.

2006-01-01

Full Text Available Aluminum alloys have been widely used in the fields of automobile and aerospace industries. Due to their bad cold-formability in deep drawing, a lot of forming methods have been implemented to increase the drawing height and the limiting drawing rate (LDR. The conventional deep drawing process is limited to a certain limit drawing ratio beyond which failure will ensue. The purpose of this experimental study is to examine the possibilities of increasing this limitation using the multi-point blank holder. The results from the experiments showed that the multi-point blank holder is effective way to promote deep drawability of Al-1050 sheet.

Relations Among Behavioral and Questionnaire Measures of Impulsivity in a Sample of Suicide Attempters

OpenAIRE

Bagge, Courtney L.; Littlefield, Andrew K.; Rosellini, Anthony J.; Coffey, Scott F.

2013-01-01

Despite the focus on impulsivity within suicide research, it remains unclear the extent to which impulsivity assessments, that purportedly tap similar constructs, show significant overlap in samples of individuals with suicidal behaviors. In a sample of 69 suicide attempters, we took a multitrait, multimethod approach to examine the relation among various questionnaire and behavioral assessments of impulsivity facets. With the exception of urgency and go-stop performance there was little evid...

Candidate isolated neutron stars and other optically blank x-ray fields identified from the rosat all-sky and sloan digital sky surveys

Energy Technology Data Exchange (ETDEWEB)

Agueros, Marcel A.; Anderson, Scott F.; /Washington U., Seattle, Astron. Dept.; Margon, Bruce; /Baltimore, Space Telescope Sci.; Haberl, Frank; Voges, Wolfgang; /Garching,; Annis, James; /Fermilab; Schneider, Donald P.; /Penn State U., Astron. Astrophys.; Brinkmann, Jonathan; /Apache Point Observ.

2005-11-01

Only seven radio-quiet isolated neutron stars (INSs) emitting thermal X rays are known, a sample that has yet to definitively address such fundamental issues as the equation of state of degenerate neutron matter. We describe a selection algorithm based on a cross-correlation of the ROSAT All-Sky Survey (RASS) and the Sloan Digital Sky Survey (SDSS) that identifies X-ray error circles devoid of plausible optical counterparts to the SDSS g {approx} 22 magnitudes limit. We quantitatively characterize these error circles as optically blank; they may host INSs or other similarly exotic X-ray sources such as radio-quiet BL Lacs, obscured AGN, etc. Our search is an order of magnitude more selective than previous searches for optically blank RASS error circles, and excludes the 99.9% of error circles that contain more common X-ray-emitting subclasses. We find 11 candidates, nine of which are new. While our search is designed to find the best INS candidates and not to produce a complete list of INSs in the RASS, it is reassuring that our number of candidates is consistent with predictions from INS population models. Further X-ray observations will obtain pinpoint positions and determine whether these sources are entirely optically blank at g {approx} 22, supporting the presence of likely isolated neutron stars and perhaps enabling detailed follow-up studies of neutron star physics.

Data of the Modified Somatic Perception Questionnaire (MSPQ administered to a sample of immigrants in Genoa (Italy

Directory of Open Access Journals (Sweden)

Nicola Luigi Bragazzi

2017-06-01

Full Text Available This article reports the data of the Modified Somatic Perception Questionnaire (MSPQ administered to a sample of 143 immigrants accessing an outpatient clinic or the general practitioners offices in Genoa (Italy compared with 186 Italian patients. For further details and for the interpretation of the data, the reader is referred to the original publication “Somatic perception, cultural differences and immigration: results from administration of the Modified Somatic Perception Questionnaire (MSPQ to a sample of immigrants” by Bragazzi et al. (2014 [1].

Tool life equation for blanking 18-8 stainless steel strips

Directory of Open Access Journals (Sweden)

Faura, F.

1998-08-01

Full Text Available Hereinafter it is presented a model for the behaviour and life of circular blanking tool used in sheet forming processes of 18-8 stainless steel (sheet thickness: 1 mm. Firstly it has analyzed the different studies that have previously delt with this problem. Secondly taking into account recently made experiments, it is proposed a simple formulation to predict tool life with enough reliability. To this purpose it has examined different parameters in the wear process, inferring from these the fundamental parameters that regulate them and about which the different equations have been configurated. Blanking tests were performed using a 20 t press at a speed of 150 strokes/min. Punch materials used in these tests were AISI A2 and AISI D2 with diameters between 1.5 and 10 mm. The blanking tests were performed at a clearance between 5 and 20 % of the work material thickness.

En el presente artículo se presenta un modelo de ecuación de vida de herramientas para punzonado circular de chapa de acero inoxidable 18-8 (1 mm de espesor. Se han analizado inicialmente los diferentes estudios que previamente han abordado este problema. Posteriormente, teniendo en cuenta los experimentos realizados recientemente, se propone una formulación simple para predecir con Habilidad suficiente la vida de la herramienta. Para este propósito se han examinado los diferentes parámetros que afectan al proceso de desgaste, infiriendo a partir de estos, los parámetros fundamentales que lo regulan y sobre los cuales se han configurado las diferentes ecuaciones. Los ensayos fueron realizados en una prensa de 20 t y una velocidad de punzonado de 150 golpes/min. Los materiales de los punzones usados en los ensayos fueron AISI A2 y AISI D2 con diámetros comprendidos entre 1,5 y 10 mm. Los ensayos se realizaron para juegos de corte comprendidos entre un 5 y 20 % del espesor de la chapa.

Gender differences on the Five to Fifteen questionnaire in a non-referred sample with inattention and hyperactivity-impulsivity and a clinic-referred sample with hyperkinetic disorder

DEFF Research Database (Denmark)

Lambek, Rikke; Trillingsgaard, Anegen; Kadesjö, Björn

2010-01-01

The aim of the present study was to examine gender differences in children with inattention, hyperactivity, and impulsivity on the Five to Fifteen (FTF) parent questionnaire. First, non-referred girls (n = 43) and boys (n = 51) with problems of attention and hyperactivity-impulsivity and then cli......The aim of the present study was to examine gender differences in children with inattention, hyperactivity, and impulsivity on the Five to Fifteen (FTF) parent questionnaire. First, non-referred girls (n = 43) and boys (n = 51) with problems of attention and hyperactivity...... questionnaire. Secondly, it was examined whether the application of gender mixed norms versus gender specific norms would result in varying proportions of clinic-referred children with HKD being identified as impaired on the subdomains of the FTF questionnaire. Based on results it was concluded that the use...... of a gender mixed normative sample may lead to overestimation of impairment in boys with HKD, but the type of sample applied to define impairment on the FTF should depend on the purpose for applying the questionnaire....

Technique for rapid at-wavelength inspection of extreme ultraviolet mask blanks

International Nuclear Information System (INIS)

Spector, S. J.; White, D. L.; Tennant, D. M.; Ocola, L. E.; Novembre, A. E.; Peabody, M. L.; Wood, O. R. II

1999-01-01

We have developed two new methods for at-wavelength inspection of mask blanks for extreme-ultraviolet (EUV) lithography. In one method an EUV photoresist is applied directly to a mask blank which is then flood exposed with EUV light and partially developed. In the second method, the photoresist is applied to an EUV transparent membrane that is placed in close proximity to the mask and then exposed and developed. Both reflectivity defects and phase defects alter the exposure of the resist, resulting in mounds of resist at defect sites that can then be located by visual inspection. In the direct application method, a higher contrast resist was shown to increase the height of the mounds, thereby improving the sensitivity of the technique. In the membrane method, a holographic technique was used to reconstruct an image of the mask, revealing the presence of very small defects, approximately 0.2 μm in size. The demonstrated clean transfer of phase and amplitude defects to resist features on a membrane will be important when flagging defects in an automatic inspection tool. (c) 1999 American Vacuum Society

Clinical characteristics of patients with tinnitus evaluated with the Tinnitus Sample Case History Questionnaire in Japan: A case series.

Directory of Open Access Journals (Sweden)

Takashi Kojima

Full Text Available The Tinnitus Sample Case History Questionnaire was determined as a standardized questionnaire for obtaining patient case histories and for characterizing patients into subgroups at the Tinnitus Research Initiative in 2006. In this study, we developed a Japanese version of this questionnaire for evaluating the clinical characteristics of patients with tinnitus. The Japanese version of the questionnaire will be available for evaluating treatments for tinnitus and for comparing data on tinnitus in research centers.To evaluate the clinical characteristics of patients with tinnitus in Japan using a newly developed Japanese version of Tinnitus Sample Case History Questionnaire.This was a prospective study based on patient records.University hospitals, general hospitals, and clinics.We collected patient data using a Japanese translated version of the Tinnitus Sample Case History Questionnaire. In total, 584 patients who visited our institutions in Japan between August 2012 and March 2014 were included (280 males and 304 females; age 13-92 years; mean age, 60.8. We examined patients after dividing them into two groups according to the presence or absence of hyperacusis. The collected results were compared with those from the Tinnitus Research Initiative database.Compared with the TRI database, there were significantly more elderly female patients and fewer patients with trauma-associated tinnitus. There was a statistically lower ratio of patients with hyperacusis. We found that patients with tinnitus in addition to hyperacusis had greater tinnitus severity and exhibited higher rates of various complications.The Japanese version of the Tinnitus Sample Case History Questionnaire developed in this study can be a useful tool for evaluating patients with tinnitus in Japan. The results of this multicenter study reflect the characteristics of patients with tinnitus who require medical care in Japan. Our data provides a preliminary basis for an international

Reliability and consistency of a validated sun exposure questionnaire in a population-based Danish sample

Directory of Open Access Journals (Sweden)

B. Køster

2018-06-01

Full Text Available An important feature of questionnaire validation is reliability. To be able to measure a given concept by questionnaire validly, the reliability needs to be high.The objectives of this study were to examine reliability of attitude and knowledge and behavioral consistency of sunburn in a developed questionnaire for monitoring and evaluating population sun-related behavior.Sun related behavior, attitude and knowledge was measured weekly by a questionnaire in the summer of 2013 among 664 Danes. Reliability was tested in a test-retest design. Consistency of behavioral information was tested similarly in a questionnaire adapted to measure behavior throughout the summer.The response rates for questionnaire 1, 2 and 3 were high and the drop out was not dependent on demographic characteristic. There was at least 73% agreement between sunburns in the measurement week and the entire summer, and a possible sunburn underestimation in questionnaires summarizing the entire summer. The participants underestimated their outdoor exposure in the evaluation covering the entire summer as compared to the measurement week. The reliability of scales measuring attitude and knowledge was high for majority of scales, while consistency in protection behavior was low.To our knowledge, this is the first study to report reliability for a completely validated questionnaire on sun-related behavior in a national random population based sample. Further, we show that attitude and knowledge questions confirmed their validity with good reliability, while consistency of protection behavior in general and in a week's measurement was low. Keywords: Questionnaire, Validation, Reliability, Skin cancer, Prevention, Ultraviolet radiation

Reliability and consistency of a validated sun exposure questionnaire in a population-based Danish sample.

Science.gov (United States)

Køster, B; Søndergaard, J; Nielsen, J B; Olsen, A; Bentzen, J

2018-06-01

An important feature of questionnaire validation is reliability. To be able to measure a given concept by questionnaire validly, the reliability needs to be high. The objectives of this study were to examine reliability of attitude and knowledge and behavioral consistency of sunburn in a developed questionnaire for monitoring and evaluating population sun-related behavior. Sun related behavior, attitude and knowledge was measured weekly by a questionnaire in the summer of 2013 among 664 Danes. Reliability was tested in a test-retest design. Consistency of behavioral information was tested similarly in a questionnaire adapted to measure behavior throughout the summer. The response rates for questionnaire 1, 2 and 3 were high and the drop out was not dependent on demographic characteristic. There was at least 73% agreement between sunburns in the measurement week and the entire summer, and a possible sunburn underestimation in questionnaires summarizing the entire summer. The participants underestimated their outdoor exposure in the evaluation covering the entire summer as compared to the measurement week. The reliability of scales measuring attitude and knowledge was high for majority of scales, while consistency in protection behavior was low. To our knowledge, this is the first study to report reliability for a completely validated questionnaire on sun-related behavior in a national random population based sample. Further, we show that attitude and knowledge questions confirmed their validity with good reliability, while consistency of protection behavior in general and in a week's measurement was low.

Cold pressure welding of aluminium-steel blanks: Manufacturing process and electrochemical surface preparation

Science.gov (United States)

Schmidt, Hans Christian; Homberg, Werner; Orive, Alejandro Gonzalez; Grundmeier, Guido; Hordych, Illia; Maier, Hans Jürgen

2018-05-01

In this study the manufacture of aluminium-steel blanks by cold pressure welding and their preparation for a welding process through electrochemical surface treatment are investigated and discussed. The cold pressure welding process was done with an incremental rolling tool that allows for the partial pressure welding of two blanks along a prepared path. The influence of the surface preparation by electrochemical deposition of bond promoting organosilane-based agents and roughening on a nano-scale is investigated and compared to conventional surface treatments. Coating the surfaces with a thin organosilane-based film incorporating specific functional groups should promote additional bonding between the mating oxide layers; its influence on the total weld strength is studied. Pressure welding requires suitable process strategies, and the current advances in the proposed incremental rolling process for the combination of mild steel and aluminium are presented.

On Number of Almost Blank Subframes in Heterogeneous Cellular Networks

OpenAIRE

Cierny, Michal; Wang, Haining; Wichman, Risto; Ding, Zhi; Wijting, Carl

2013-01-01

In heterogeneous cellular scenarios with macrocells, femtocells or picocells users may suffer from significant co-channel cross-tier interference. To manage this interference 3GPP introduced almost blank subframe (ABSF), a subframe in which the interferer tier is not allowed to transmit data. Vulnerable users thus get a chance to be scheduled in ABSFs with reduced cross-tier interference. We analyze downlink scenarios using stochastic geometry and formulate a condition for the required number...

Fill in the Blank: Culture Jamming and the Advertising of Agency

Science.gov (United States)

Lambert-Beatty, Carrie

2010-01-01

This article is a review on billboard liberation and some other projects that develop the idea of talking back or over advertising in a playful and youthful way. In one of them, Ji Lee's Bubble Project, an artist places blank thought-bubble stickers on street advertisements and waits to see what people write on them, completing the work of art and…

A short version of the revised 'experience of close relationships questionnaire': investigating non-clinical and clinical samples.

Science.gov (United States)

Wongpakaran, Tinakon; Wongpakaran, Nahathai

2012-01-01

This study seeks to investigate the psychometric properties of the short version of the revised 'Experience of Close Relationships' questionnaire, comparing non-clinical and clinical samples. In total 702 subjects participated in this study, of whom 531 were non-clinical participants and 171 were psychiatric patients. They completed the short version of the revised 'Experience of Close Relationships' questionnaire (ECR-R-18), the Perceived Stress Scale-10(PSS-10), the Rosenberg Self-Esteem Scale (RSES) and the UCLA Loneliness scale. A retest of the ECR-R-18 was then performed at four-week intervals. Then, confirmatory factor analyses were performed to test the validity of the new scale. The ECR-R-18 showed a fair to good internal consistency (α 0.77 to 0.87) for both samples, and the test-retest reliability was found to be satisfactory (ICC = 0.75). The anxiety sub-scale demonstrated concurrent validity with PSS-10 and RSES, while the avoidance sub-scale showed concurrent validity with the UCLA Loneliness Scale. Confirmatory factor analysis using method factors yielded two factors with an acceptable model fit for both groups. An invariance test revealed that the ECR-R-18 when used on the clinical group differed from when used with the non-clinical group. The ECR-R-18 questionnaire revealed an overall better level of fit than the original 36 item questionnaire, indicating its suitability for use with a broader group of samples, including clinical samples. The reliability of the ECR-R- 18 might be increased if a modified scoring system is used and if our suggestions with regard to future studies are followed up.

Forming Of Spherical Titanium Cups From Circular Blanks With Cutouts On The Perimeter

Directory of Open Access Journals (Sweden)

Lacki P.

2015-06-01

Full Text Available Despite substantial demand for drawn parts made of high-strength sheet metal (including titanium alloys observed in the modern industry, particularly automotive and aviation, their application remains insignificant. This results from the fact that such sheet metal shows poor plasticity and its cold-forming is almost impossible. Low drawability makes it impossible to obtain even such simple shapes as spherical cups. The authors of this study developed circular sheet-metal blanks with cutouts on their perimeter. The blanks allow for cold forming of spherical cups from Ti6Al4V titanium alloy sheet metal using conventional rigid tools. The cutouts proposed in the study affect plastic strain distribution, which in turn leads to an increase in forming depth by about 30%. The numerical analysis, performed using the PamStamp 2G System software based on finite element method, was verified experimentally.

A big blank white canvas? Mapping and modeling human impact in Antarctica

Science.gov (United States)

Steve Carver; Tina Tin

2015-01-01

Antarctica is certainly what most people would consider being the world's last great wilderness; largely untouched and undeveloped by humans. Yet it is not inviolate - there are scientific bases, tourist operations, expeditions, airstrips and even roads. Although these impacts are by and large limited in extent, their very presence in an otherwise "blank...

Setup of a Parameterized FE Model for the Die Roll Prediction in Fine Blanking using Artificial Neural Networks

Science.gov (United States)

Stanke, J.; Trauth, D.; Feuerhack, A.; Klocke, F.

2017-09-01

Die roll is a morphological feature of fine blanked sheared edges. The die roll reduces the functional part of the sheared edge. To compensate for the die roll thicker sheet metal strips and secondary machining must be used. However, in order to avoid this, the influence of various fine blanking process parameters on the die roll has been experimentally and numerically studied, but there is still a lack of knowledge on the effects of some factors and especially factor interactions on the die roll. Recent changes in the field of artificial intelligence motivate the hybrid use of the finite element method and artificial neural networks to account for these non-considered parameters. Therefore, a set of simulations using a validated finite element model of fine blanking is firstly used to train an artificial neural network. Then the artificial neural network is trained with thousands of experimental trials. Thus, the objective of this contribution is to develop an artificial neural network that reliably predicts the die roll. Therefore, in this contribution, the setup of a fully parameterized 2D FE model is presented that will be used for batch training of an artificial neural network. The FE model enables an automatic variation of the edge radii of blank punch and die plate, the counter and blank holder force, the sheet metal thickness and part diameter, V-ring height and position, cutting velocity as well as material parameters covered by the Hensel-Spittel model for 16MnCr5 (1.7131, AISI/SAE 5115). The FE model is validated using experimental trails. The results of this contribution is a FE model suitable to perform 9.623 simulations and to pass the simulated die roll width and height automatically to an artificial neural network.

Comparison of two analytical models of blanking and proposal of a new model

NARCIS (Netherlands)

Klingenberg, W; Singh, UP

With the development of accurate Finite Element models of the punching/blanking process by the present authors and other researchers, important possibilities emerged to model and analyse the process in a research environment. However, Finite Element models are less well suited for use in a

Gaseous radiocarbon measurements of small samples

International Nuclear Information System (INIS)

Ruff, M.; Szidat, S.; Gaeggeler, H.W.; Suter, M.; Synal, H.-A.; Wacker, L.

2010-01-01

Radiocarbon dating by means of accelerator mass spectrometry (AMS) is a well-established method for samples containing carbon in the milligram range. However, the measurement of small samples containing less than 50 μg carbon often fails. It is difficult to graphitise these samples and the preparation is prone to contamination. To avoid graphitisation, a solution can be the direct measurement of carbon dioxide. The MICADAS, the smallest accelerator for radiocarbon dating in Zurich, is equipped with a hybrid Cs sputter ion source. It allows the measurement of both, graphite targets and gaseous CO 2 samples, without any rebuilding. This work presents experiences dealing with small samples containing 1-40 μg carbon. 500 unknown samples of different environmental research fields have been measured yet. Most of the samples were measured with the gas ion source. These data are compared with earlier measurements of small graphite samples. The performance of the two different techniques is discussed and main contributions to the blank determined. An analysis of blank and standard data measured within years allowed a quantification of the contamination, which was found to be of the order of 55 ng and 750 ng carbon (50 pMC) for the gaseous and the graphite samples, respectively. For quality control, a number of certified standards were measured using the gas ion source to demonstrate reliability of the data.

Vapor space characterization of Waste Tank 241-C-103: Inorganic results from sample Job 7B (May 12-25, 1994)

International Nuclear Information System (INIS)

Ligotke, M.W.; Pool, K.H.; Lerner, B.D.

1994-10-01

This report is to provide analytical results for use in safety and toxicological evaluations of the vapor space of Hanford single-shell waste storage tanks C-103. Samples were analysed to determine concentrations of ammonia, nitric oxide, nitrogen dioxide, sulfur oxides, and hydrogen cyanide. In addition to the samples, controls were analyzed that included blanks, spiked blanks, and spiked samples. These controls provided information about the suitability of sampling and analytical methods. Also included are the following: information describing the methods and sampling procedures used; results of sample analyses; and Conclusions and recommendations

Psychometric Properties of the Penn State Worry Questionnaire for Children in a Large Clinical Sample

Science.gov (United States)

Pestle, Sarah L.; Chorpita, Bruce F.; Schiffman, Jason

2008-01-01

The Penn State Worry Questionnaire for Children (PSWQ-C; Chorpita, Tracey, Brown, Collica, & Barlow, 1997) is a 14-item self-report measure of worry in children and adolescents. Although the PSWQ-C has demonstrated favorable psychometric properties in small clinical and large community samples, this study represents the first psychometric…

Some Data Concerning the Vocational Preference Inventory Scales and the Strong Vocational Interest Blank

Science.gov (United States)

Cockriel, Irvin W.

1972-01-01

Occupational scales of the Vocational Preference Inventory were correlated with the Basic Interest scales of the Strong Vocational Interest Blank. The 285 subjects were women freshmen in a College of Education. The results indicate that the scales are not highly correlated. (Author)

Tank 241-BY-108 vapor sampling and analysis tank characterization report

International Nuclear Information System (INIS)

Huckaby, J.L.

1995-01-01

Tank BY-108 headspace gas and vapor samples were collected and analyzed to help determine the potential risks to tank farm workers due to fugitive emissions from the tank. Tank BY-108 is on the Ferrocyanide Watch List. Samples were collected from Tank BY-108 using the vapor sampling system (VSS) on october 27, 1994 by WHC Sampling and Mobile Laboratories. The tank headspace temperature was determined to be 25.7 C. Air from the Tank BY-108 headspace was withdrawn via a 7.9 m-long heated sampling probe mounted in riser 1, and transferred via heated tubing to the VSS sampling manifold. All heated zones of the VSS were maintained at approximately 50 C. Sampling media were prepared and analyzed by WHC, Oak Ridge National Laboratories, and Pacific Northwest Laboratories. The 40 tank air samples and 2 ambient air control samples collected are listed in Table X-1 by analytical laboratory. Table X-1 also lists the 14 trip blanks and 2 field blanks that accompanied the samples

Tank 241-BY-110 vapor sampling and analysis tank characterization report

International Nuclear Information System (INIS)

Huckaby, J.L.

1995-01-01

Tank BY-110 headspace gas and vapor samples were collected and analyzed to help determine the potential risks to tank farm workers due to fugitive emissions from the tank. Tank BY-110 is on the Ferrocyanide Watch List. Samples were collected from Tank BY-110 using the vapor sampling system (VSS) on November 11, 1994 by WHC Sampling and Mobile Laboratories. The tank headspace temperature was determined to be 27 C. Air from the Tank BY-110 headspace was withdrawn via a 7.9 m-long heated sampling probe mounted in riser 12B, and transferred via heated tubing to the VSS sampling manifold. All heated zones of the VSS were maintained at approximately 50 C. Sampling media were prepared and analyzed by WHC, Oak Ridge National Laboratories, and Pacific Northwest Laboratories. The 40 tank air samples and 2 ambient air control samples collected are listed in Table X-1 by analytical laboratory. Table X-1 also lists the 14 trip blanks and 2 field blanks that accompanied the samples

Die betekenis wat geld vir blankes en kleurlinge inhou

Directory of Open Access Journals (Sweden)

D. L. Visagie

1978-11-01

‘n Oorsig van relevante literatuur dui daarop dat die betekenis van geld (wat 'n belangrike plek in sekere motiveringsteorieë inneem van persoon tot persoon kan verskil. Hierdie verskil kan hoofsaaklik aan persoonlike- en agtergrondsfaktore toegeskryf word. Wanneer die genoemde faktore binne groepsverband ooreenstem, ontwikkel en vorm daar unieke “groepsbetekenisse" wat aan sekere begrippe geheg word. Betekenismeting wat in hierdie ondersoek deur middel van die semantiese differensiaal op 128 Blanke- en 109 Kleurlingstudente uitgevoer is, toon egter oor die algemeen geen beduidende verskil ten opsigte van die begrip geld nie. Slegs ten opsigte van twee van 15 semantiese skale is beduidende verskille tussen die twee groepe gevind.

HEATING OF BLANK IN FORM OF PRISM IN ACCORDANCE WITH TECHNOLOGICAL LIMITATIONS

Directory of Open Access Journals (Sweden)

V. B. Kovalevsky

2009-01-01

Full Text Available The paper considers a problem on optimum heating control of a blank in the form of prism under complicated conditions of heat-transfer in accordance with criteria of gas consumption minimization, decarburized layer and scaling. Numerical algorithm of the problem solution and examples are given in the paper. A new technology of the flame furnace operation has been developed in the paper. 

Questionnaire investigation for the earthquake in Honjo city and Yazawa city, Akita Prefecture; Jishin ni kansuru ishiki chosa (Akitaken Honjoshi oyobi Yuzawashi ni okeru anketo kara)

Energy Technology Data Exchange (ETDEWEB)

Nogoshi, M [Akita University, Akita (Japan). College of Education; Kabutoya, S

1996-05-01

Consciousness for the earthquake was investigated by questionnaire surveys made in Honjo City and Yuzawa City, Akita Pref. in October 1995 twelve years after the Nihonkai Chubu Earthquake (M=7.7) in May 1983. The survey was conducted in terms of 27 items including personality, memory, knowledge/interest, psychology/action, mental attitude/preparations, wishes for researchers and administration, etc. Also included were the items on the Great Hanshin-Awaji Earthquake and the earthquake blank areas. The number of distributed questionnaires and the recovery rate of them are 1500 and 79.2% in Honjo City, and 1700 and 84.7% in Yuzawa City. From the survey, it was found that people have a lot of knowledge of and high interest in the earthquake and well remember it, and a lot of people know of tsunami, liquefaction phenomena, and the earthquake blank area. Further, they are afraid of earthquakes and think of their actions to be taken in case of earthquake. However, most people are little prepared for earthquakes. Important future subjects were suggested for the study of disaster prevention measures. 13 figs.

The Effect of Reading Involvement through Open-Ended Strategy vs. Fill-in- the- Blanks Strategy on Young EFL Learners’ Reading Comprehension Ability

Directory of Open Access Journals (Sweden)

Rita Salehi Sepehr

2014-11-01

Full Text Available The present study investigated the extent to which an instructional framework of integrating strategy instruction (open-ended strategy and fill-in-the blanks strategy with motivation- support affected on reading result for young EFL learners. The central area of exploration included a comparison among three approaches to reading instruction: First, fill-in-the blanks strategy intervention; second, open-ended strategy intervention; and last, a control group which received the conventional reading strategies. The participants were sampled from amongst a group of seventy-seven pre-intermediate EFL learners in a language school in Tehran- Iran based on convenient sampling technique. For the sake of measurement, the researchers administered PET and CELT along with reading strategy based-test to quantify the participants’ current level of knowledge as well as the degree of achievement after treatment. For measurement’s sake, different types of tests such as PET, reading comprehension test (CELT, and reading strategy based- test were employed to quantify the participants’ current level of knowledge as well as the degree of achievement before and after instruction. The result of the present study indicated that the experimental groups had a significant improvement over the control group. Also, the level of learners’ reading engagement during classroom work mediated the instructional effects on reading outcomes. The results of this study can be to the benefit of both EFL and ESL teachers to teach reading comprehension using the student's critical mind as well as critical involvement in the reading tasks.

Nutrient and pesticide contamination bias estimated from field blanks collected at surface-water sites in U.S. Geological Survey Water-Quality Networks, 2002–12

Science.gov (United States)

Medalie, Laura; Martin, Jeffrey D.

2017-08-14

Potential contamination bias was estimated for 8 nutrient analytes and 40 pesticides in stream water collected by the U.S. Geological Survey at 147 stream sites from across the United States, and representing a variety of hydrologic conditions and site types, for water years 2002–12. This study updates previous U.S. Geological Survey evaluations of potential contamination bias for nutrients and pesticides. Contamination is potentially introduced to water samples by exposure to airborne gases and particulates, from inadequate cleaning of sampling or analytic equipment, and from inadvertent sources during sample collection, field processing, shipment, and laboratory analysis. Potential contamination bias, based on frequency and magnitude of detections in field blanks, is used to determine whether or under what conditions environmental data might need to be qualified for the interpretation of results in the context of comparisons with background levels, drinking-water standards, aquatic-life criteria or benchmarks, or human-health benchmarks. Environmental samples for which contamination bias as determined in this report applies are those from historical U.S. Geological Survey water-quality networks or programs that were collected during the same time frame and according to the same protocols and that were analyzed in the same laboratory as field blanks described in this report.Results from field blanks for ammonia, nitrite, nitrite plus nitrate, orthophosphate, and total phosphorus were partitioned by analytical method; results from the most commonly used analytical method for total phosphorus were further partitioned by date. Depending on the analytical method, 3.8, 9.2, or 26.9 percent of environmental samples, the last of these percentages pertaining to all results from 2007 through 2012, were potentially affected by ammonia contamination. Nitrite contamination potentially affected up to 2.6 percent of environmental samples collected between 2002 and 2006 and

Reliability and validity of the Positive Mental Health Questionnaire in a sample of Spanish university students.

Science.gov (United States)

Roldán-Merino, J; Lluch-Canut, M T; Casas, I; Sanromà-Ortíz, M; Ferré-Grau, C; Sequeira, C; Falcó-Pegueroles, A; Soares, D; Puig-Llobet, M

2017-03-01

WHAT IS KNOWN ON THE SUBJECT?: In general, the current studies of positive mental health use questionnaires or parts thereof. However, while these questionnaires evaluate aspects of positive mental health, they fail to measure the construct itself. WHAT DOES THIS PAPER ADD TO EXISTING KNOWLEDGE?: The widespread use and the lack of specific questionnaires for evaluating the positive mental health construct justify the need to measure the robustness of the Positive Mental Health Questionnaire. Also six factors are proposed to measure positive mental health. WHAT ARE THE IMPLICATIONS FOR PRACTICE?: The availability of a good questionnaire to measure positive mental health in university students is useful not only to promote mental health but also to strengthen the curricula of future professionals. Introduction Nursing has a relevant role in managing mental health. It is important to identify and thereafter to enhance positive aspects of mental health among university nursing students. Aim The aim of the present study was to analyse the psychometric properties of the Positive Mental Health Questionnaire (PMHQ) in terms of reliability and validity using confirmatory factor analysis in a sample of university students. Method A cross-sectional study was carried out in a sample of 1091 students at 4 nursing schools in Catalonia, Spain. The reliability of the PMHQ was measured by means of Cronbach's alpha coefficient, and the test-retest stability was measured with the intraclass correlation coefficient (ICC). Confirmatory factor analysis was used to determine the validity of the factorial structure. Results Cronbach's alpha coefficient was satisfactory (>0.70) for four of the six subscales or dimensions and ranged from 0.54 to 0.79. ICC analysis was satisfactory for the six subscales or dimensions. The hypothesis was confirmed in the analysis of the correlations between subclasses and the overall scale, with the strongest correlations being found between the majority of

Personality in general and clinical samples: Measurement invariance of the Multidimensional Personality Questionnaire.

Science.gov (United States)

Eigenhuis, Annemarie; Kamphuis, Jan H; Noordhof, Arjen

2017-09-01

A growing body of research suggests that the same general dimensions can describe normal and pathological personality, but most of the supporting evidence is exploratory. We aim to determine in a confirmatory framework the extent to which responses on the Multidimensional Personality Questionnaire (MPQ) are identical across general and clinical samples. We tested the Dutch brief form of the MPQ (MPQ-BF-NL) for measurement invariance across a general population subsample (N = 365) and a clinical sample (N = 365), using Multiple Group Confirmatory Factor Analysis (MGCFA) and Multiple Group Exploratory Structural Equation Modeling (MGESEM). As an omnibus personality test, the MPQ-BF-NL revealed strict invariance, indicating absence of bias. Unidimensional per scale tests for measurement invariance revealed that 10% of items appeared to contain bias across samples. Item bias only affected the scale interpretation of Achievement, with individuals from the clinical sample more readily admitting to put high demands on themselves than individuals from the general sample, regardless of trait level. This formal test of equivalence provides strong evidence for the common structure of normal and pathological personality and lends further support to the clinical utility of the MPQ. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

The Work Role Functioning Questionnaire v2.0 Showed Consistent Factor Structure Across Six Working Samples

DEFF Research Database (Denmark)

Abma, Femke I.; Bültmann, Ute; Amick, Benjamin C.

2017-01-01

Objective: The Work Role Functioning Questionnaire v2.0 (WRFQ) is an outcome measure linking a persons’ health to the ability to meet work demands in the twenty-first century. We aimed to examine the construct validity of the WRFQ in a heterogeneous set of working samples in the Netherlands...

The Work Role Functioning Questionnaire v2.0 Showed Consistent Factor Structure Across Six Working Samples

NARCIS (Netherlands)

Abma, F.I.; Bultmann, U.; Amick III, B.C.; Arends, I.; Dorland, P.A.; Flach, P.A.; Klink, J.J.L van der; Ven H.A., van de; Bjørner, J.B.

2017-01-01

Objective The Work Role Functioning Questionnaire v2.0 (WRFQ) is an outcome measure linking a persons’ health to the ability to meet work demands in the twenty-first century. We aimed to examine the construct validity of the WRFQ in a heterogeneous set of working samples in the Netherlands with

Developing a passive trap for diffusive atmospheric {sup 14}CO{sub 2} sampling

Energy Technology Data Exchange (ETDEWEB)

Walker, Jennifer C.; Xu, Xiaomei [Department of Earth System Science, University of California, Irvine, Irvine, CA (United States); Fahrni, Simon M. [Department of Earth System Science, University of California, Irvine, Irvine, CA (United States); Institute of Particle Physics, ETH, Zurich (Switzerland); Lupascu, Massimo [Department of Earth System Science, University of California, Irvine, Irvine, CA (United States); Department of Geography, National University of Singapore (Singapore); Czimczik, Claudia I. [Department of Earth System Science, University of California, Irvine, Irvine, CA (United States)

2015-10-15

{sup 14}C-CO{sub 2} measurement is an unique tool to quantify source-based emissions of CO{sub 2} for both the urban and natural environments. Acquiring a sample that temporally integrates the atmospheric {sup 14}C-CO{sub 2} signature that allows for precise {sup 14}C analysis is often necessary, but can require complex sampling devices, which can be difficult to deploy and maintain, especially for multiple locations. Here we describe our progress in developing a diffusive atmospheric CO{sub 2} molecular sieve trap, which requires no power to operate. We present results from various cleaning procedures, and rigorously tested for blank and memory effects. Traps were tested in the environment along-side conventional sampling flasks for accuracy. Results show that blank and memory effects can be minimized with thorough cleaning and by avoiding overheating, and that diffusively collected air samples agree well with traditionally canister-sampled air.

Mohelno – A terminal Last Glacial Maximum industry with microlithic tools made on carenoidal blanks

Czech Academy of Sciences Publication Activity Database

Škrdla, Petr; Nejman, L.; Bartík, J.; Rychtaříková, Tereza; Nikolajev, Pavel; Eigner, J.; Nývltová Fišáková, Miriam; Novák, J.; Polanská, M.

2016-01-01

Roč. 406, 25 June 2016 (2016), s. 184-194 ISSN 1040-6182 R&D Projects: GA ČR GA15-19170S Keywords : Moravia * Mohelno * Epi-Gravettian * Epi-Aurignacian * Microlithic tools * Carenoidal blanks Subject RIV: AC - Archeology, Anthropology, Ethnology Impact factor: 2.199, year: 2016

Zinc Finger Takes on a Whole New Meaning: Reducing and Monitoring Zinc Blanks in the Isotope Lab

Science.gov (United States)

Wilkes, E. B.; Wasylenki, L. E.; Anbar, A. D.

2010-12-01

In terms of avoiding contamination, zinc is one of the most difficult elements to study isotopically. The reason for this is that zinc stearate is a very common mold release agent in the production of plastics, including those most often used in isotope geochemistry clean labs. While polyethylene bottles, polypropylene centrifuge tubes, pipette tips, and Kimwipes are all potential sources of contaminant zinc, by far the largest amount of zinc is introduced to the laboratory by gloves. Most items can be effectively rid of zinc by soaking in dilute hydrochloric acid, but gloves cannot be cleaned easily, and use of gloves can quickly lead to contamination on many surfaces throughout the lab. We recently conducted several experiments in which dissolved zinc was partly adsorbed onto synthetic Mn oxyhydroxide particles. The dissolved and adsorbed pools were separated by filtration, purified with ion exchange chemistry, and analyzed for isotope composition by MC-ICP-MS. We used a commercially purchased ICP standard solution both as our standard (delta66/64Zn = 0) and as the source of the zinc in the experiments. Whenever gloves were worn during purification, process blanks contained as much as 150 ng Zn, and both the dissolved and adsorbed pools of zinc came out enriched in heavy isotopes relative to the starting pool, contrary to our expectation of mass balance. When gloves were not worn, blanks were brands of vinyl gloves, including one brand recommended to us for being “low” in zinc, measured +10‰ relative to our standard. We therefore concluded that glove zinc contaminated most of our experimental samples. We were only able to see such clear evidence of contamination because (1) we were doing an experiment in which we expected one light and one heavy pool of zinc compared to our standard, and (2) we happened to use an ICP standard solution for delta = 0 that is strongly enriched in light isotopes relative to both brands of gloves. We caution others who measure

Validation of the Marijuana Effect Expectancies Questionnaire (MEEQ in a Non-Clinical French-Speaking Adolescent Sample

Directory of Open Access Journals (Sweden)

Emilie Schmits

2016-02-01

Full Text Available Teenagers commonly use cannabis. Expectancies related to the effects of cannabis play an important role in its consumption and are frequently measured with the Marijuana Effect Expectancies Questionnaire (MEEQ. This study aims to assess the psychometric properties (factor structure, internal consistency reliability, criterion validity of the French MEEQ. A sample of 1,343 non-clinical teenagers (14–18 years were recruited to answer a self-report questionnaire; 877 of them responded twice (one-year interval. A four-factor structure was obtained: Cognitive Impairment and Negative, Relaxation and Social Facilitation, Perceptual Enhancement and Craving and Negative Behavioral Effect Expectancies. It is concluded that the French MEEQ constitutes an appropriate tool to measure cannabis effect expectancies among adolescents.

The Depressive Experiences Questionnaire: validity and psychological correlates in a clinical sample.

Science.gov (United States)

Riley, W T; McCranie, E W

1990-01-01

This study sought to compare the original and revised scoring systems of the Depressive Experiences Questionnaire (DEQ) and to assess the construct validity of the Dependent and Self-Critical subscales of the DEQ in a clinically depressed sample. Subjects were 103 depressed inpatients who completed the DEQ, the Beck Depression Inventory (BDI), the Hopelessness Scale, the Automatic Thoughts Questionnaire (ATQ), the Rathus Assertiveness Schedule (RAS), and the Minnesota Multiphasic Personality Inventory (MMPI). The original and revised scoring systems of the DEQ evidenced good concurrent validity for each factor scale, but the revised system did not sufficiently discriminate dependent and self-critical dimensions. Using the original scoring system, self-criticism was significantly and positively related to severity of depression, whereas dependency was not, particularly for males. Factor analysis of the DEQ scales and the other scales used in this study supported the dependent and self-critical dimensions. For men, the correlation of the DEQ with the MMPI scales indicated that self-criticism was associated with psychotic symptoms, hostility/conflict, and a distress/exaggerated response set, whereas dependency did not correlate significantly with any MMPI scales. Females, however, did not exhibit a differential pattern of correlations between either the Dependency or the Self-Criticism scales and the MMPI. These findings suggest possible gender differences in the clinical characteristics of male and female dependent and self-critical depressive subtypes.

Pursuit of improvement in uranium bulk analysis at the clear facility for safeguards environmental samples

International Nuclear Information System (INIS)

Sakurai, S.; Takahashi, M.; Sakakibara, T.; Magara, M.; Kurosawa, S.; Esaka, F.; Takai, K.; Watanabe, K.; Usuda, S.; Adachi, T.

2002-01-01

Full text: In order to contribute to the IAEA strengthened safeguards system, a project started in Japan Atomic Energy Research Institute (JAERI) in 1998. Consequently, a clean room facility called as CLEAR, the Clean Laboratory for Environmental Analysis and Research, was constructed in June 2001 at JAERI Tokai and the analytical techniques of ultra-trace nuclear materials in environmental samples are being developed. As for the bulk analysis, performance of inductively-coupled plasma mass spectrometry (ICP-MS) was mainly examined because sample preparation for ICP-MS is simpler than that for thermal ionization mass spectrometry (TIMS). Interference of polyatomic ion (such as PtAr + ) and coexisting element (such as Na) on the uranium ions, as well as mass bias caused by ICP-MS operating conditions, has been investigated for precise measurement on uranium isotope ratio. The authors have also studied on the uranium blanks during sample treatment process. The blank value below 10 pg uranium per sample treatment was obtained: dominant origins were elution from Teflon vessel surface in acid heating process of the sample to dry up. The work is in progress to minimize the blank. Compared with the process blank and the minimum uranium amount for isotope ratio measurement by ICP-MS (ca. 10 pg for natural uranium), the swipe cotton (Texwipe-304) which is currently used for IAEA Environmental Sampling includes much more amount of natural uranium in several nano-grams. If the amount of uranium collected on Texwipe-304 is small, sensitive and reliable measurement on isotope ratio will be impossible by bulk analysis. The authors are seeking alternative swipe materials with less amount of uranium. Recently, one of the authors devised an effective technique for recovery of uranium-containing particles from Texwipe-304. The technique, named as Vacuum Suction Method, uses a combination of polycarbonate membrane filters and a macro-pipette tip, which is connected to a vacuum pump

Utility of the Croatian translation of the community integration questionnaire-revised in a sample of adults with moderate to severe traumatic brain injury.

Science.gov (United States)

Tršinski, Dubravko; Tadinac, Meri; Bakran, Žarko; Klepo, Ivana

2018-02-23

To examine the utility of the Community Integration Questionnaire-Revised, translated into Croatian, in a sample of adults with moderate to severe traumatic brain injury. The Community Integration Questionnaire-Revised was administered to a sample of 88 adults with traumatic brain injury and to a control sample matched by gender, age and education. Participants with traumatic brain injury were divided into four subgroups according to injury severity. The internal consistency of the Community Integration Questionnaire-Revised was satisfactory. The differences between the group with traumatic brain injury and the control group were statistically significant for the overall Community Integration Questionnaire-Revised score, as well as for all the subscales apart from the Home Integration subscale. The community Integration Questionnaire-Revised score varied significantly for subgroups with different severity of traumatic brain injury. The results show that the Croatian translation of the Community Integration Questionnaire-Revised is useful in assessing participation in adults with traumatic brain injury and confirm previous findings that severity of injury predicts community integration. Results of the new Electronic Social Networking scale indicate that persons who are more active on electronic social networks report better results for other domains of community integration, especially social activities. Implications for rehabilitation The Croatian translation of the Community Integration Questionnaire-Revised is a valid tool for long-term assessment of participation in various domains in persons with moderate to severe traumatic brain injury Persons with traumatic brain injury who are more active in the use of electronic social networking are also more integrated into social and productivity domains. Targeted training in the use of new technologies could enhance participation after traumatic brain injury.

Energy conservation in existing office buildings. Appendices to report, Phase I, Volume 2

Energy Technology Data Exchange (ETDEWEB)

1977-06-01

A blank form of Questionnaire No. 1 is first presented, followed by data compiled from that questionnaire. Then data are presented on the analyses of the 436 buildings, statistical validation for selection of the 44 building sample, and some examples of the matching buildings for the 44 building sample. Questionnaire No. 2 is then given, followed by additional data collected from the study concerning energy consumption and building characteristics. To complete the appendices, a simulation of a typical building and a hypothetical building is included. (MCW)

Application of the diode laser for welding in tairoled blanks; Aplicaciond el lase de diodo para la soldadura en tailored blanks

Energy Technology Data Exchange (ETDEWEB)

Bocos, J. L.; Zubiri, F.; Garciandia, F.; Pena, J.; Cortiella, A.; Berrueta, J. M.; Zapirain, F.

2004-07-01

During the last years, one of the most interesting subjects in the automotive industry is the weight reduction of the automobile, and so to diminish the fuel consumption. Among other performance, the use in the body car of materials which have high mechanical resistance must be considered for the weight reduction of the automobile and maintaining high benefits. In this work, it has been studied the utilization of the diode laser for high resistance steel sheets welding, concretely microalloying steels (ZStE), DP dual phase and TRIP transformation induced plasticity. These steels can be employed in tailored blanks, which are defined as two or more separate pieces of flat material of dissimilar thickness and/or physical properties joined together before forming, to provide superior qualities in the finished stamped part. In this study, the metallographic characterization has been realised in the welding seams, and the mechanical behaviour has been analysed employing the following tests: microhardenss, drawing, tensile and fatigue. (Author) 15 refs.

Blood sample collection and patient identification demand improvement: a questionnaire study of preanalytical practices in hospital wards and laboratories.

Science.gov (United States)

Wallin, Olof; Söderberg, Johan; Van Guelpen, Bethany; Stenlund, Hans; Grankvist, Kjell; Brulin, Christine

2010-09-01

Scand J Caring Sci; 2010; 24; 581-591 
 Blood sample collection and patient identification demand improvement: a questionnaire study of preanalytical practices in hospital wards and laboratories   Most errors in venous blood testing result from human mistakes occurring before the sample reach the laboratory.   To survey venous blood sampling (VBS) practices in hospital wards and to compare practices with hospital laboratories.   Staff in two hospitals (all wards) and two hospital laboratories (314 respondents, response rate 94%), completed a questionnaire addressing issues relevant to the collection of venous blood samples for clinical chemistry testing.   The findings suggest that instructions for patient identification and the collection of venous blood samples were not always followed. For example, 79% of the respondents reported the undesirable practice (UDP) of not always using wristbands for patient identification. Similarly, 87% of the respondents noted the UDP of removing venous stasis after the sampling is finished. Compared with the ward staff, a significantly higher proportion of the laboratory staff reported desirable practices regarding the collection of venous blood samples. Neither education nor the existence of established sampling routines was clearly associated with VBS practices among the ward staff.   The results of this study, the first of its kind, suggest that a clinically important risk of error is associated with VBS in the surveyed wards. Most important is the risk of misidentification of patients. Quality improvement of blood sample collection is clearly needed, particularly in hospital wards. © 2009 The Authors. Journal compilation © 2009 Nordic College of Caring Science.

Evidence-Based Practice Questionnaire: A Confirmatory Factor Analysis in a Social Work Sample

Directory of Open Access Journals (Sweden)

Karen Rice

2010-10-01

Full Text Available This study examined the psychometric properties of the Evidence-Based Practice Questionnaire (EBPQ. The 24-item EBPQ was developed to measure health professionals’ attitudes toward, knowledge of, and use of evidence-based practice (EBP. A confirmatory factor analysis was performed on the EBPQ given to a random sample of National Association of Social Work members (N = 167. The coefficient alpha of the EBPQ was .93. The study supported a 23-item 3-factor model with acceptable model fit indices (χ² = 469.04; RMSEA = .081; SRMR = .068; CFI = .900. This study suggests a slightly modified EBPQ may be a useful tool to assess social workers’ attitudes toward, knowledge of, and use of EBP.

Reliability of attitude and knowledge items and behavioral consistency in the validated sun exposure questionnaire in a Danish population based sample

DEFF Research Database (Denmark)

Køster, Brian; Søndergaard, Jens; Nielsen, Jesper Bo

2018-01-01

in protection behavior was low. To our knowledge, this is the first study to report reliability for a completely validated questionnaire on sun-related behavior in a national random population based sample. Further, we show that attitude and knowledge questions confirmed their validity with good reliability......An important feature of questionnaire validation is reliability. To be able to measure a given concept by questionnaire validly, the reliability needs to be high. The objectives of this study were to examine reliability of attitude and knowledge and behavioral consistency of sunburn in a developed...... questionnaire for monitoring and evaluating population sun-related behavior. Sun related behavior, attitude and knowledge was measured weekly by a questionnaire in the summer of 2013 among 664 Danes. Reliability was tested in a test-retest design. Consistency of behavioral information was tested similarly...

External quality control in ground-water sampling and analysis at the Hanford Site

International Nuclear Information System (INIS)

Hall, S.H.; Juracich, S.P.

1991-11-01

At the US Department of Energy's Hanford Site, external Quality Control (QC) for ground-water monitoring is extensive and has included routine submittal of intra- and interlaboratory duplicate samples, blind samples, and several kinds of blank samples. Examination of the resulting QC data for nine of the constituents found in ground water at the Hanford Site shows that the quality of analysis has generally been within the expectations of precision and accuracy that have been established by the US Environmental Protection Agency (EPA). The constituents subjected to review were nitrate, chromium, sodium, fluoride, carbon tetrachloride, tritium, ammonium, trichloroethylene, and cyanide. Of these, the fluoride measurements were notable exceptions and were poor by EPA standards. The review has shown that interlaboratory analysis of duplicate samples yields the most useful QC data for evaluating laboratory performance in determining commonly encountered constituents. For rarely encountered constituents, interlaboratory comparisons may be augmented with blind samples (synthetic samples of known composition). Intralaboratory comparisons, blanks, and spikes should be generally restricted to studies of suspected or known sample contamination and to studies of the adequacy of sampling and analytical procedures

Psychometric Properties and Normative Data of the Zuckerman-Kuhlman Personality Questionnaire in a Psychiatric Outpatient Sample.

Science.gov (United States)

Martínez Ortega, Yolanda; Gomà-I-Freixanet, Montserrat; Valero, Sergi

2017-01-01

The Zuckerman-Kuhlman Personality Questionnaire (ZKPQ; Zuckerman, Kuhlman, Joireman, Teta, & Kraft, 1993 ) was designed for the assessment of personality. The goal of this work was to determine the psychometric properties of the ZKPQ, as well as to establish normative data by gender and age in an outpatient sample attending primary mental health care services. We administered the questionnaire to 314 participants (34.7% males) 18 to 81 years old. The most prevalent primary diagnoses were mood (37.9%) and adjustment disorders (35.0%). Concerning the psychometric properties of the ZKPQ, the pattern of internal consistencies was similar to that previously found among general population, student, or clinical samples. Regarding gender differences, a general pattern was found, with women scoring higher on neuroticism and sociability, and lower on aggression-hostility. As for age, in general, scores declined with age. Norm-based decision making has the potential for significant and long-lasting consequences, and the quality of decisions based on score comparisons can be improved when scores are compared to norms fitted to the group of reference. The availability of the ZKPQ norms by gender and age in mental health care will benefit the accuracy of assessment and therapeutic decision making, providing more effective treatment planning overall.

Detailed characterization of welding fumes in personal exposure samples

International Nuclear Information System (INIS)

Quémerais, B; Mino, James; Amin, M R; Golshahi, H; Izadi, H

2015-01-01

The objective of the project was to develop a method allowing for detailed characterization of welding particles including particle number concentration, size distribution, surface chemistry and chemical composition of individual particles, as well as metal concentration of various welding fumes in personal exposure samples using regular sampling equipment. A sample strategy was developed to evaluate the variation of the collection methods on mass concentration. Samples were collected with various samplers and filters at two different locations using our collection system. The first location was using a robotic welding system while the second was manual welding. Collected samples were analysed for mass concentration using gravimetryand metal concentration using ICP/OES. More advanced analysis was performed on selected filters using X-Ray Photoelectron Spectroscopy to determine surface composition of the particles, and X-Ray Diffraction to determine chemical composition of the fumes. Results showed that the robotic system had a lot of variation in space when the collection system was located close to the weld. Collection efficiency was found to be quite variable depending upon the type of filter. As well, metal concentrations in blank filters were dependent upon the type of filter with MCE presenting with the highest blank values. Results obtained with the XRD and XPS systems showed that it was possible to analyse a small of powdered welding fume sample but results on filters were not conclusive. (paper)

Investigation of Hardness Change for Spot Welded Tailored Blank in Hot Stamping Using CCT and Deformation-CCT Diagrams

Science.gov (United States)

Yogo, Yasuhiro; Kurato, Nozomi; Iwata, Noritoshi

2018-04-01

When an outer panel of a B-pillar is manufactured with the hot stamping process, reinforcements are spot welded on its inner side. Before reinforcements are added, the microstructure of the outer panel is martensite. However, reheating during spot welding changes the martensite to ferrite, which has a lower hardness in the heat-affected zone than in other areas. If spot welding is conducted before hot stamping for making a spot welded tailored blank, the microstructure in the spot welded tailored blank after hot stamping is martensite. This sequence of processes avoids hardness reduction due to spot welding. In this study, the hardness and microstructure around spot welded parts of the tailored blank were investigated. The results clearly showed that areas close to the spot welded parts are severely stretched during hot stamping. In addition, stretching suppresses the martensitic phase transformation and reduces the hardness. To characterize this phenomenon, a simulation was conducted that considered the effects of pre-strain on the phase transformation. A continuous cooling transformation (CCT) diagram and a deformation continuous cooling transformation (DCCT) diagram were made in order to quantify the effect of the cooling rate and pre-strain on the phase transformation and hardness. The hardness was then calculated using the experimentally measured CCT and DCCT diagrams and the finite element analysis results. The calculated hardness was compared with the experimental hardness. Good agreement was found between the calculated and experimental results.

Investigation of Hardness Change for Spot Welded Tailored Blank in Hot Stamping Using CCT and Deformation-CCT Diagrams

Science.gov (United States)

Yogo, Yasuhiro; Kurato, Nozomi; Iwata, Noritoshi

2018-06-01

When an outer panel of a B-pillar is manufactured with the hot stamping process, reinforcements are spot welded on its inner side. Before reinforcements are added, the microstructure of the outer panel is martensite. However, reheating during spot welding changes the martensite to ferrite, which has a lower hardness in the heat-affected zone than in other areas. If spot welding is conducted before hot stamping for making a spot welded tailored blank, the microstructure in the spot welded tailored blank after hot stamping is martensite. This sequence of processes avoids hardness reduction due to spot welding. In this study, the hardness and microstructure around spot welded parts of the tailored blank were investigated. The results clearly showed that areas close to the spot welded parts are severely stretched during hot stamping. In addition, stretching suppresses the martensitic phase transformation and reduces the hardness. To characterize this phenomenon, a simulation was conducted that considered the effects of pre-strain on the phase transformation. A continuous cooling transformation (CCT) diagram and a deformation continuous cooling transformation (DCCT) diagram were made in order to quantify the effect of the cooling rate and pre-strain on the phase transformation and hardness. The hardness was then calculated using the experimentally measured CCT and DCCT diagrams and the finite element analysis results. The calculated hardness was compared with the experimental hardness. Good agreement was found between the calculated and experimental results.

Oak ridge national laboratory automated clean chemistry for bulk analysis of environmental swipe samples

Energy Technology Data Exchange (ETDEWEB)

Bostick, Debra A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hexel, Cole R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ticknor, Brian W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Tevepaugh, Kayron N. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Metzger, Shalina C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2016-11-01

To shorten the lengthy and costly manual chemical purification procedures, sample preparation methods for mass spectrometry are being automated using commercial-off-the-shelf (COTS) equipment. This addresses a serious need in the nuclear safeguards community to debottleneck the separation of U and Pu in environmental samples—currently performed by overburdened chemists—with a method that allows unattended, overnight operation. In collaboration with Elemental Scientific Inc., the prepFAST-MC2 was designed based on current COTS equipment that was modified for U/Pu separations utilizing Eichrom™ TEVA and UTEVA resins. Initial verification of individual columns yielded small elution volumes with consistent elution profiles and good recovery. Combined column calibration demonstrated ample separation without crosscontamination of the eluent. Automated packing and unpacking of the built-in columns initially showed >15% deviation in resin loading by weight, which can lead to inconsistent separations. Optimization of the packing and unpacking methods led to a reduction in the variability of the packed resin to less than 5% daily. The reproducibility of the automated system was tested with samples containing 30 ng U and 15 pg Pu, which were separated in a series with alternating reagent blanks. These experiments showed very good washout of both the resin and the sample from the columns as evidenced by low blank values. Analysis of the major and minor isotope ratios for U and Pu provided values well within data quality limits for the International Atomic Energy Agency. Additionally, system process blanks spiked with 233U and 244Pu tracers were separated using the automated system after it was moved outside of a clean room and yielded levels equivalent to clean room blanks, confirming that the system can produce high quality results without the need for expensive clean room infrastructure. Comparison of the amount of personnel time necessary for successful manual vs

Centrifugal vacuum casting for fuel cladding tube blanks

International Nuclear Information System (INIS)

Zelenskii, V.F.; Neklyudov, I.M.; Chernyi, B.P.; Zeidlits, M.P.; Vanzha, A.F.; Rubashko, V.G.; Ryabchikov, L.N.; Smirnov, Y.K.; Bespalova, V.R.; Mashkarova, V.T.; Rybal'chenko, N.D.

1990-01-01

An advanced technique for making tube blanks with an acceptable level of nonmetallic inclusions is vacuum induction melting combined with centrifugal casting, as the latter gives a cylindrical casting having an axial hole, while the cast metal has elevated density and contains fewer nonmetallic inclusions than does the metal cast in a stationary mold. The reduction in the nonmetallic inclusions occurs because of increased rates of floating up in the rotating mold on account of the centrifugal force and the rejection to the inner surface. One can choose the parameters such as the pouring speed, rotational speed, mold cooling, and liquid-metal temperature and can introduce a deoxidizer to remove the nonmetallic inclusions or reduce the grain size of them and produce an appropriate cast structure and obtain a metal whose quality is the same as that on vacuum induction melting with secondary arc remelting. For these purposes, the authors have developed centrifugal-casting machines for use under vacuum or in inert gases with horizontal and vertical mold rotation axes

Screening for Binge Eating Disorders Using the Patient Health Questionnaire in a Community Sample

Science.gov (United States)

Striegel-Moore, Ruth H.; Perrin, Nancy; DeBar, Lynn; Wilson, G. Terence; Rosselli, Francine; Kraemer, Helena C.

2009-01-01

Objective To examine the operating characteristics of the Patient Health Questionnaire eating disorder module (PHQ-ED) for identifying bulimia nervosa/binge eating disorder (BN/BED) or recurrent binge eating (RBE) in a community sample, and to compare true positive (TP) versus false positive (FP) cases on clinical validators. Method 259 screen positive individuals and a random sample of 89 screen negative cases completed a diagnostic interview. Sensitivity, specificity, and Positive Predictive Value (PPV) were calculated. TP and FP cases were compared using t-tests and Chi-Square tests. Results The PHQ-ED had high sensitivity (100%) and specificity (92%) for detecting BN/BED or RBE, but PPV was low (15% or 19%). TP and FP cases did not differ significantly on frequency of subjective bulimic episodes, objective overeating, restraint, on BMI, and on self-rated health. Conclusions The PHQ-ED is recommended for use in large populations only in conjunction with follow-up questions to rule out cases without objective bulimic episodes. PMID:19424976

An evaluation testing technique of single event effect using Beam Blanking SEM

Energy Technology Data Exchange (ETDEWEB)

Aoki, J; Hada, T; Pesce, A; Akutsu, T; Matsuda, S [National Space Development Agency of Japan, Tsukuba, Ibaraki (Japan). Tsukuba Space Center; Igarashi, T; Baba, S

1997-03-01

Beam Blanking SEM (Scanning Electron Microscope) testing technique has been applied to CMOS SRAM devices to evaluate the occurence of soft errors on memory cells. Cross-section versus beam current and LET curves derived from BBSEM and heavy ion testing technique, respectively, have been compared. A linear relation between BBSEM current and heavy ion LET has been found. The purpose of this study was to demonstrate that the application of focused pulsed electron beam could be a reliable, convenient and inexpensive tool to investigate the effects of heavy ions and high energy particles on memory devices for space application. (author)

Specificity and sensibility of 9-Itens Wearing-off Questionnaire in Brazilian Parkinson disease patient sample

Directory of Open Access Journals (Sweden)

Jasper Guimarães Santos

2014-11-01

Full Text Available Objective (1 To evaluate whether the Nine Items Questionnaire (WOQ-9 for the detection of wearing-off (WO in Parkinson Disease (PD, by means of its screening ability, is a helpful tool to assist neurologists in diagnosing WO; (2 To determine the sensitivity and the specificity of a free Brazilian Portuguese translation of WOQ-9. Method A sample obtained by convenience included 60 patients. The WOQ-9 was answered by the patients themselves before their routine consultations. The detection of the WO by the WOQ-9 was compared with the neurologist assessment. Statistical significance was 5%. Results The WOQ-9 showed sensitivity of 100%, specificity of 10.3%, positive and negative predictive values of 54.4% and 100% respectively. The identification of WO by the WOQ-9 was congruent in 54.5% of cases with neurological evaluation. Conclusion The WOQ-9 is a convenient screening tool to aid physicians to detect WO in PD patients, and it is a quick and easy self-administered questionnaire.

Blank book on energy: priority to renewable energies and energy savings

International Nuclear Information System (INIS)

Anon.

2003-01-01

The British minister of industry and trade has presented a blank book on energy. This report has in view to curb the emission of greenhouse gases by 60 % before 2050 and to double the contribution of renewable energies by 2020 with an intermediate objective of 10 % in 2010. Today this contribution reaches 3 %. New nuclear power plants are not expected to be built. This report recalls that the United-Kingdom (UK) imports half the coal it needs and states that by 2006 UK will become a net gas importing country and by 2010 a net oil importing country. The solution promoted by the report is to rely on diverse energy sources and on diverse supplying countries. (A.C.)

Testing the Reliability of Delay Discounting of Ten Commodities Using the Fill-in-the-Blank Method

Science.gov (United States)

Weatherly, Jeffrey N.; Derenne, Adam; Terrell, Heather K.

2011-01-01

Several measures of delay discounting have been shown to be reliable over periods of up to 3 months. In the present study, 115 participants completed a fill-in-the-blank (FITB) delay-discounting task on sets of 5 different commodities, 12 weeks apart. Results showed that discounting rates were not well described by a hyperbolic function but were…

Laser welding of tailored blanks

Directory of Open Access Journals (Sweden)

Peças, P.

1998-04-01

Full Text Available Laser welding has an incrising role in the automotive industry, namely on the sub-assemblies manufacturing. Several sheet-shape parts are laser welded, on a dissimilar combination of thicknesses and materials, and are afterwards formed (stamped being transformed in a vehicle body component. In this paper low carbon CO₂ laser welding, on the thicknesses of 1,25 and 0,75 mm, formability investigation is described. There will be a description of how the laser welded blanks behave in different forming tests, and the influence of misalignment and undercut on the formibility. The quality is evaluated by measuring the limit strain and limit effective strain for the laser welded sheets and the base material, which will be presented in a forming limit diagram.

A soldadura laser assume um papel cada vez mais importante na indústria automóvel, principalmente para a fabricação de sub-conjuntos constituídos por varias partes de chapa de diferentes espessuras (e diferentes materiais, que depois de estampados constituem um componente para integrar num veículo. Descreve-se neste artigo o trabalho de investigação de enformabilidade de chapa de ac.o de baixo carbono soldada por laser de CO₂, nas espessuras de 1,25 e 0,75 mm. Apresenta-se uma descrição do comportamento das chapas soldadas por laser em diferentes testes de enformação, e a influência dos defeitos das soldaduras (desalinhamento e queda do banho-undercut no comportamento à enformação. A qualidade é avaliada pela medição da extensão limite e da extensão limite efectiva no material base e no material soldado, que serão representadas num diagrama de limite de enformabilidade.

75 FR 9436 - Aleris Blanking and Rim Products, Inc., a Division of Aleris International, Inc., Terre Haute, IN...

Science.gov (United States)

2010-03-02

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-72,041] Aleris Blanking and Rim Products, Inc., a Division of Aleris International, Inc., Terre Haute, IN; Notice of Affirmative Determination Regarding Application for Reconsideration By application dated January 29, 2010, the petitioner...

EUV blank defect and particle inspection with high throughput immersion AFM with 1nm 3D resolution

NARCIS (Netherlands)

Es, M.H. van; Sadeghian Marnani, H.

2016-01-01

Inspection of EUV mask substrates and blanks is demanding. We envision this is a good target application for massively parallel Atomic Force Microscopy (AFM). We envision to do a full surface characterization of EUV masks with AFM enabling 1nm true 3D resolution over the entire surface. The limiting

Guided episodic sampling for capturing and characterizing industrial plumes

Science.gov (United States)

Ou-Yang, Chang-Feng; Liao, Wei-Cheng; Chang, Chih-Chung; Hsieh, Hsin-Cheng; Wang, Jia-Lin

2018-02-01

An integrated sampling technique, dubbed trigger sampling, was developed to capture characteristic industrial emissions or plumes. In the field experiment, a hydrogen sulfide (H2S) analyzer was used as the triggering instrument at the boundary of a refinery plant due to frequent complaints of foul smell from local residents. Ten episodic samples were captured when the H2S level surpassed the prescribed trigger level of 8.5 ppbv over a three-day period. Three non-episodic (blank) samples and 23 road-side samples were also collected for comparison. All the 36 flask samples were analyzed by gas chromatography-mass spectrometry/flame ionization detection (GC-MS/FID) for 108 volatile organic compounds (VOCs). The total VOC abundance of the event samples was exceedingly higher than the non-episodic samples by over 80 times in the extreme case. Alkanes were found to be the dominant constituents in the event samples, amounting to over 90% of the total VOC concentrations vs. only 30-40% for the blank and metropolitan samples. In addition, light alkanes in the event samples were highly correlated with the trigger species H2S (R2 = 0.82), implying their common origin. The matrix of chemical composition vs. sample types permitted easy visualization of the dominance of light alkanes for the event samples compared to other types of samples. Principle component analysis (PCA) identified two major contributors to cover 93% of the total variance arising from the 36 samples, further quantifying the distinction of the triggered episodic samples from the contrast samples. The proposed trigger sampling is a coupling of fast-and-slow measurement techniques. In this example, the fast-response H2S analyzer served to "guide" sampling to capture industrial plumes which were then characterized by a relatively slow method of GC-MS/FID for detailed chemical composition representative of the prominent sources.

Experimental and numerical analysis of interlocking rib formation at sheet metal blanking

Science.gov (United States)

Bolka, Špela; Bratuš, Vitoslav; Starman, Bojan; Mole, Nikolaj

2018-05-01

Cores for electrical motors are typically produced by blanking of laminations and then stacking them together, with, for instance, interlocking ribs or welding. Strict geometrical tolerances, both on the lamination and on the stack, combined with complex part geometry and harder steel strip material, call for use of predictive methods to optimize the process before actual blanking to reduce the costs and speed up the process. One of the major influences on the final stack geometry is the quality of the interlocking ribs. A rib is formed in one step and joined with the rib of the preceding lamination in the next. The quality of the joint determines the firmness of the stack and also influences its. The geometrical and positional accuracy is thus crucial in rib formation process. In this study, a complex experimental and numerical analysis of interlocking rib formation has been performed. The aim of the analysis is to numerically predict the shape of the rib in order to perform a numerical simulation of the stack formation in the next step of the process. A detailed experimental research has been performed in order to characterize influential parameters on the rib formation and the geometry of the ribs itself, using classical and 3D laser microscopy. The formation of the interlocking rib is then simulated using Abaqus Explicit. The Hilll 48 constitutive material model is based on extensive and novel material characterization process, combining data from in-plane and out-of-plane material tests to perform a 3D analysis of both, rib formation and rib joining. The study shows good correlation between the experimental and numerical results.

Application of Finite Element Method to Analyze the Influences of Process Parameters on the Cut Surface in Fine Blanking Processes by Using Clearance-Dependent Critical Fracture Criteria

Directory of Open Access Journals (Sweden)

Phyo Wai Myint

2018-04-01

Full Text Available The correct choice of process parameters is important in predicting the cut surface and obtaining a fully-fine sheared surface in the fine blanking process. The researchers used the value of the critical fracture criterion obtained by long duration experiments to predict the conditions of cut surfaces in the fine blanking process. In this study, the clearance-dependent critical ductile fracture criteria obtained by the Cockcroft-Latham and Oyane criteria were used to reduce the time and cost of experiments to obtain the value of the critical fracture criterion. The Finite Element Method (FEM was applied to fine blanking processes to study the influences of process parameters such as the initial compression, the punch and die corner radii and the shape and size of the V-ring indenter on the length of the sheared surface. The effects of stress triaxiality and punch diameters on the cut surface produced by the fine blanking process are also discussed. The verified process parameters and tool geometry for obtaining a fully-fine sheared SPCC surface are described. The results showed that the accurate and stable prediction of ductile fracture initiation can be achieved using the Oyane criterion.

Questionnaire use among nordic neuropsychologists

DEFF Research Database (Denmark)

Egeland, Jens; Norup, Anne; Persson, Bengt A.

2017-01-01

The core method of neuropsychologists has been to collect structured samples of behavior through standardized tests. Information that cannot be elicited through tests may be gathered by questionnaires asking questions about behavior. Tests may deconstruct cognitive function precisely, but lack...... the ecological validity of questionnaires. Thus, many neuropsychologists have advocated more use of questionnaires, but it is not known whether professional practice has changed. Until recently, personality instruments were the only widespread questionnaires in frequent use among neuropsychologists. We studied...... the inventory use of 702 Nordic neuropsychologists. The most used questionnaires are listed, and differences between countries are analyzed. In addition, the questionnaires are grouped with regard to whether they map cognition, behavior not observable during consultations, emotional symptoms, personality...

Tank 241-C-101 vapor sampling and analysis tank characterization report

International Nuclear Information System (INIS)

Huckaby, J.L.

1995-01-01

Tank C-101 headspace gas and vapor samples were collected and analyzed to help determine the potential risks of fugitive emissions to tank farm workers. Gas and vapor samples from the Tank C-101 headspace were collected on July 7, 1994 using the in situ sampling (ISS) method, and again on September 1, 1994 using the more robust vapor sampling system (VSS). Gas and vapor concentrations in Tank C-101 are influenced by its connections to other tanks and its ventilation pathways. At issue is whether the organic vapors in Tank C-101 are from the waste in that tank, or from Tanks C-102 or C-103. Tank C-103 is on the Organic Watch List; the other two are not. Air from the Tank C-101 headspace was withdrawn via a 7.9-m long heated sampling probe mounted in riser 8, and transferred via heated tubing to the VSS sampling manifold. The tank headspace temperature was determined to be 34.0 C, and all heated zones of the VSS were maintained at approximately 50 C. Sampling media were prepared and analyzed by WHC, Oak Ridge National Laboratories, Pacific Northwest Laboratories, and Oregon Graduate Institute of Science and Technology through a contract with Sandia National Laboratories. The 39 tank air samples and 2 ambient air control samples collected are listed in Table X-1 by analytical laboratory. Table X-1 also lists the 14 trip blanks and 2 field blanks provided by the laboratories

Sexual behavioral abstine HIV/AIDS questionnaire: Validation study of an Iranian questionnaire.

Science.gov (United States)

Najarkolaei, Fatemeh Rahmati; Niknami, Shamsaddin; Shokravi, Farkhondeh Amin; Tavafian, Sedigheh Sadat; Fesharaki, Mohammad Gholami; Jafari, Mohammad Reza

2014-01-01

This study was designed to assess the validity and reliability of the designed sexual, behavioral abstinence, and avoidance of high-risk situation questionnaire (SBAHAQ), with an aim to construct an appropriate development tool in the Iranian population. A descriptive-analytic study was conducted among female undergraduate students of Tehran University, who were selected through cluster random sampling. After reviewing the questionnaires and investigating face and content validity, internal consistency of the questionnaire was assessed by Cronbach's alpha. Explanatory and confirmatory factor analysis was conducted using SPSS and AMOS 16 Software, respectively. The sample consisted of 348 female university students with a mean age of 20.69 ± 1.63 years. The content validity ratio (CVR) coefficient was 0.85 and the reliability of each section of the questionnaire was as follows: Perceived benefit (PB; 0.87), behavioral intention (BI; 0.77), and self-efficacy (SE; 0.85) (Cronbach's alpha totally was 0.83). Explanatory factor analysis showed three factors, including SE, PB, and BI, with the total variance of 61% and Kaiser-Meyer-Olkin (KMO) index of 88%. These factors were also confirmed by confirmatory factor analysis [adjusted goodness of fitness index (AGFI) = 0.939, root mean square error of approximation (RMSEA) = 0.039]. This study showed the designed questionnaire provided adequate construct validity and reliability, and could be adequately used to measure sexual abstinence and avoidance of high-risk situations among female students.

Quality control for measurement of soil samples containing 237Np and 241Am as radiotracer

International Nuclear Information System (INIS)

Sha Lianmao; Zhang Caihong; Song Hailong; Ren Xiaona; Han Yuhu; Zhang Aiming; Chu Taiwei

2003-01-01

This paper reports quality control (QC) for the measurement of soil samples containing 237 Np and 241 Am as radiotracers in migration test of transuranic nuclides. All of the QC were done independently by the QA members of analytical work. It mainly included checking 5%-10% of the total analyzed samples; preparing blank samples, blind replicate sample and spiked samples used as quality control samples to check the quality of analytical work

Enhancing native defect sensitivity for EUV actinic blank inspection: optimized pupil engineering and photon noise study

Science.gov (United States)

Wang, Yow-Gwo; Neureuther, Andrew; Naulleau, Patrick

2016-03-01

In this paper, we discuss the impact of optimized pupil engineering and photon noise on native defect sensitivity in EUV actinic blank inspection. Native defects include phase-dominated defects, absorber defects, and defects with a combination of phase and absorption behavior. First, we extend the idea of the Zernike phase contrast (ZPC) method and study the impact of optimum phase shift in the pupil plane on native defect sensitivity, showing a 23% signal-to-noise ratio (SNR) enhancement compare to bright field (BF) for a phase defect with 20% absorption. We also describe the possibility to increase target defect SNR on target defect sizes at the price of losing the sensitivity on smaller (non-critical) defects. Moreover, we show the advantage of the optimized phase contrast (OZPC) method over BF EUV actinic blank inspection. A single focus scan from OZPC has better inspection efficiency over BF. Second, we make a detailed comparison between the phase contrast with apodization (AZPC) method and dark field (DF) method based on defect sensitivity in the presence of both photon shot noise and camera noise. Performance is compared for a variety of photon levels, mask roughness conditions, and combinations of defect phase and absorption.

An analytical method for the determination of plutonium in autopsy samples

International Nuclear Information System (INIS)

Santori, G.

1983-01-01

A sensitive method for the determination of plutonium in autopsy samples is described. After a suitable chemical pretreatment of the samples the plutonium is separated by extraction chromatography with tri-n-octylphosphine oxide (TOPO) supported on microporus polyethylene. After electrodeposition of plutonium the activity is counted by alpha spectroscopy. The global yield was 75-80%. The reagent blank activity was such to allow the determination of some femtocuries of plutonium

Development of a Maltese version of oral health-associated questionnaires: OHIP-14, GOHAI, and the Denture Satisfaction Questionnaire.

Science.gov (United States)

Santucci, Daniela; Camilleri, Liberato; Kobayashi, Yasuyoshi; Attard, Nikolai

2014-01-01

To show the reliability of the Maltese translations of OHIP-14, GOHAI, and the Denture Satisfaction Questionnaire, define the reliability of the responses, and determine the correlation between OHIP-14 and GOHAI. The items of the three questionnaires (OHIP-14, GOHAI, and Denture Satisfaction) were translated into Maltese and back into English to compare with the original version. Specific sampling of a population well versed in Maltese and English was carried out to obtain a sample of respondents for each questionnaire. Data were gathered through self-administered questionnaires: first administering the Maltese version and following with the English version 1 week later. Participation rates were high (98%). Cronbach's alpha for all three questionnaires was high (> 0.7), indicating satisfactory test-retest reliability of the instruments. Similarly, the Spearman correlation coefficients for both the English and Maltese versions of OHIP-14 and GOHAI were good (> 0.6). The Maltese versions of OHIP-14, GOHAI, and the Denture Satisfaction Questionnaire can be safely used as a valid alternative to the English versions in studies of patients who are limited in linguistic proficiency.

On Matrix Sampling and Imputation of Context Questionnaires with Implications for the Generation of Plausible Values in Large-Scale Assessments

Science.gov (United States)

Kaplan, David; Su, Dan

2016-01-01

This article presents findings on the consequences of matrix sampling of context questionnaires for the generation of plausible values in large-scale assessments. Three studies are conducted. Study 1 uses data from PISA 2012 to examine several different forms of missing data imputation within the chained equations framework: predictive mean…

The Use of Application Blanks as Pre-Screening Devices in Employee Selection: An Assessment of Practices in Public Schools.

Science.gov (United States)

Bredeson, Paul V.

1988-01-01

Reports on a study of the use of employment application blanks as prescreening devices in public school employee selection. Findings suggest two major areas for further research. The first relates to legal compliance with Equal Opportunity Employment guidelines. The second concerns information relevancy to personnel selection. (JAM)

African Primary Care Research: Performing surveys using questionnaires

OpenAIRE

Govender, Indiran; Mabuza, Langalibalele H.; Ogunbanjo, Gboyega A.; Mash, Bob

2014-01-01

The aim of this article is to provide practical guidance on conducting surveys and the use of questionnaires for postgraduate students at a Masters level who are undertaking primary care research. The article is intended to assist with writing the methods section of the research proposal and thinking through the relevant issues that apply to sample size calculation, sampling strategy, design of a questionnaire and administration of a questionnaire. The articleis part of a larger series on pri...

Status report on sample preparation facilities for 14C analysis at the new CologneAMS center

International Nuclear Information System (INIS)

Rethemeyer, J.; Fülöp, R.-H.; Höfle, S.; Wacker, L.; Heinze, S.; Hajdas, I.; Patt, U.; König, S.; Stapper, B.; Dewald, A.

2013-01-01

The new AMS facility at University of Cologne (CologneAMS), Germany, was established in 2010 with the delivery of the HVE 6 MV Tandetron AMS, which will be used for 14 C, 26 Al, 36 Cl, 41 Ca, 129 I, 239 U and 244 Pu analyses. Parallel to the AMS installation the radiocarbon group has started to set up and test sample preparation methods and instruments for different materials. We present first results of reference and standard materials that have been processed and graphitized in our lab and measured at the ETH and CologneAMS facilities. The graphitization blank and its influence on small samples sizes processed with an automated graphitization system have been determined. Work on isolation of individual organic compounds with a preparative gas chromatography system has been started. The focus of our future work will be on reducing process blank levels and sample sizes as well as on the application of compound-specific radiocarbon analyses in (paleo-) environmental research.

White HDPE bottles as source of serious contamination of water samples with Ba and Zn.

Science.gov (United States)

Reimann, Clemens; Grimstvedt, Andreas; Frengstad, Bjørn; Finne, Tor Erik

2007-03-15

During a recent study of surface water quality factory new white high-density polyethylene (HDPE) bottles were used for collecting the water samples. According to the established field protocol of the Geological Survey of Norway the bottles were twice carefully rinsed with water in the field prior to sampling. Several blank samples using milli-Q (ELGA) water (>18.2 MOmega) were also prepared. On checking the analytical results the blanks returned values of Ag, Ba, Sr, V, Zn and Zr. For Ba and Zn the values (c. 300 microg/l and 95 microg/l) were about 10 times above the concentrations that can be expected in natural waters. A laboratory test of the bottles demonstrated that the bottles contaminate the samples with significant amounts of Ba and Zn and some Sr. Simple acid washing of the bottles prior to use did not solve the contamination problem for Ba and Zn. The results suggest that there may exist "clean" and "dirty" HDPE bottles depending on manufacturer/production process. When collecting water samples it is mandatory to check bottles regularly as a possible source of contamination.

Development technique for deep drawing without blank holder to produce circular cup of brass alloy

OpenAIRE

Ali Hassan Saleh; Ammer Khalaf Ali

2015-01-01

Of this technique compared to the conventional deep drawing is that the circular cup can be carried out in single action press with limit In this paper a new mechanism for deep drawing was proposed to produce circular cup from thin plate without blank holder. In this technique the die assembly includes punch, die and die-punch. A 2D axisymmetric finite element model was built using DEFORM software. Effect of die geometry (half- cone angle) on maximum load, thickness distribution, strain distr...

Utility of the Community Integration Questionnaire in a sample of adults with neurological and neuropsychiatric disorders receiving prevocational training.

Science.gov (United States)

Tomaszewski, Robert; Mitrushina, Maura

2015-08-03

To investigate utility of the Community Integration Questionnaire (CIQ) in a mixed sample of adults with neurological and neuropsychiatric disorders. Cross-sectional, interview-based study. Participants were community-dwelling adults with disabilities resulting from neurological and neuropsychiatric disorders (N = 54), who participated in a pre-vocational readiness and social skills training program. Psychometric properties of the Community Integration Questionnaire (CIQ) were assessed and validated against Mayo-Portland Adaptability Inventory (MPAI) and The Problem Checklist from the New York University Head Injury Family Interview (PCL). Based on the revised scoring procedures, psychometric properties of the CIQ Home Competency scale were excellent, followed by the Total score and Social Integration scale. Productive Activity scale had low content validity and a weak association with the total score. Convergent and discriminant validity of the CIQ were demonstrated by correlation patterns with MPAI scales in the expected direction. Significant relationship was found with PCL Physical/Dependency scale. Significant associations were found with sex, living status, and record of subsequent employment. The results provide support for the use of the CIQ as a measure of participation in individuals with neurological and neuropsychiatric diagnoses and resulting disabilities. Implications for Rehabilitation An important goal of rehabilitation and training programs for individuals with dysfunction of the central nervous system is to promote their participation in social, vocational, and domestic activities. The Community Integration Questionnaire (CIQ) is a brief and efficient instrument for measuring these participation domains. This study demonstrated good psychometric properties and high utility of the CIQ in a sample of 54 individuals participating in a prevocational training program.

Design study of the geometry of the blanking tool to predict the burr formation of Zircaloy-4 sheet

Energy Technology Data Exchange (ETDEWEB)

Ha, Jisun, E-mail: nskim@sogang.ac.kr; Lee, Hyungyil, E-mail: nskim@sogang.ac.kr; Kim, Dongchul, E-mail: nskim@sogang.ac.kr; Kim, Naksoo, E-mail: nskim@sogang.ac.kr [Sogang University, Department of Mechanical Engineering, Seoul, 121-742 (Korea, Republic of)

2013-12-16

In this work, we investigated factors that influence burr formation for zircaloy-4 sheet used for spacer grids of nuclear fuel roads. Factors we considered are geometric factors of punch. We changed clearance and velocity in order to consider the failure parameters, and we changed shearing angle and corner radius of L-shaped punch in order to consider geometric factors of punch. First, we carried out blanking test with failure parameter of GTN model using L-shaped punch. The tendency of failure parameters and geometric factors that affect burr formation by analyzing sheared edges is investigated. Consequently, geometric factor's influencing on the burr formation is also high as failure parameters. Then, the sheared edges and burr formation with failure parameters and geometric factors is investigated using FE analysis model. As a result of analyzing sheared edges with the variables, we checked geometric factors more affect burr formation than failure parameters. To check the reliability of the FE model, the blanking force and the sheared edges obtained from experiments are compared with the computations considering heat transfer.

Application of the diode laser for welding in tairoled blanks

International Nuclear Information System (INIS)

Bocos, J. L.; Zubiri, F.; Garciandia, F.; Pena, J.; Cortiella, A.; Berrueta, J. M.; Zapirain, F.

2004-01-01

During the last years, one of the most interesting subjects in the automotive industry is the weight reduction of the automobile, and so to diminish the fuel consumption. Among other performance, the use in the body car of materials which have high mechanical resistance must be considered for the weight reduction of the automobile and maintaining high benefits. In this work, it has been studied the utilization of the diode laser for high resistance steel sheets welding, concretely microalloying steels (ZStE), DP dual phase and TRIP transformation induced plasticity. These steels can be employed in tailored blanks, which are defined as two or more separate pieces of flat material of dissimilar thickness and/or physical properties joined together before forming, to provide superior qualities in the finished stamped part. In this study, the metallographic characterization has been realised in the welding seams, and the mechanical behaviour has been analysed employing the following tests: microhardenss, drawing, tensile and fatigue. (Author) 15 refs

BLANK SHAPE OPTIMIZATION ON DEEP DRAWING OF A TWIN ELLIPTICAL CUP USING THE REDUCED BASIS TECHNIQUE METHOD

Directory of Open Access Journals (Sweden)

Mahdi Hasanzadeh Golshani

2015-08-01

Full Text Available In this project thesis, initial blank shape optimization of a twin elliptical cup to reduce earring phenomenon in anisotropic sheet deep drawing process was studied .The purpose of this study is optimization of initial blank for reduction of the ears height value. The optimization process carried out using finite element method approach, which is coupled with Taguchi design of experiments and reduced basis technique methods. The deep drawing process was simulated in FEM software ABAQUS 6.12. The results of optimization show earring height and, in addition, a number of design variables and time of process can be reduced by using this methods. After optimization process with the proposed method, the maximum reduction of the earring height would be from 21.08 mm to 0.07 mm and also it could be reduced to 0 in some of the directions. The proposed optimization design in this article allows the designers to select the practical basis shapes. This leads to obtain better results at the end of the optimization process, to reduce design variables, and also to prevent repeating the optimization steps for indirect shapes.

Filling in the Blank:a Postmodern Experiment on Fiction and Human Existence

Institute of Scientific and Technical Information of China (English)

沈冬欢

2014-01-01

In his short story collection Lost in the Funhouse, John Barth attempts to deal with the existential plights that fictional writing and human beings are faced with.“Title”, the most postmodern story in the collection, centers on the issue of“filling in the blank,”in which Barth leads readers to solve the problem and create the story with him. To examine Barth’s postmodern ex-periment in“Title”, this paper mainly focuses on the following three questions:what is the“blank”? How to fill in it? Why to fill in it in that way? By answering them, we may see how Barth reconciles the conflict between the urgency of“filling in the blank”and the failure of filling them.

Orthorexia nervosa: validation of a diagnosis questionnaire.

Science.gov (United States)

Donini, L M; Marsili, D; Graziani, M P; Imbriale, M; Cannella, C

2005-06-01

To validate a questionnaire for the diagnosis of orhorexia oervosa, an eating disorder defined as "maniacal obsession for healthy food". 525 subjects were enrolled. Then they were randomized into two samples (sample of 404 subjects for the construction of the test for the diagnosis of orthorexia ORTO-15; sample of 121 subjects for the validation of the test). The ORTO-15 questionnaire, validated for the diagnosis of orthorexia, is made-up of 15 multiple-choice items. The test we proposed for the diagnosis of orthorexia (ORTO 15) showed a good predictive capability at a threshold value of 40 (efficacy 73.8%, sensitivity 55.6% and specificity 75.8%) also on verification with a control sample. However, it has a limit in identifying the obsessive disorder. For this reason we maintain that further investigation is necessary and that new questions useful for the evaluation of the obsessive-compulsive behavior should be added to the ORTO-15 questionnaire.

Adaptive Vocational Personality Questionnaire Development and Validation of an adaptive personality questionnaire to analyze the vocational behavior of university students

Directory of Open Access Journals (Sweden)

Amparo Gómez-Artiga

2013-05-01

Full Text Available This study presents a personality evaluation instrument adapted to the vocational setting: the Adaptive Vocational Personality Questionnaire (AVPQ. The questionnaire was developed and tested in a sample of 2160 university students in the final years of their degree programs. The purpose of the study is to validate the questionnaire, providing evidence about its internal structure and its usefulness for predicting scores on a criterion scale. A confirmatory factor analysis combined with a cross-validation design was used: the exploratory sample (n = 879 helped to identify the model with the factorial structure that best fit the relations among the items. As expected, this model had two related but clearly separate factors: Adaptive Personality Characteristics (AC with 9 items and Non-Adaptive Personality Characteristics (NAC with 11 items. The validation sample (n =932 was used to test the generalization capacity of this model, which was satisfactory and showed a good reliability index. Regarding its usefulness in predicting proactive job-search behaviors, the results were also satisfactory. The questionnaire and keys are provided, as well as the criteria for calculating the scores on each scale and on the entire questionnaire.

Determination of chromium in water samples by neutron activation analysis after preconcentration on activated carbon

Energy Technology Data Exchange (ETDEWEB)

van der Sloot, H A [Stichting Reactor Centrum Nederland, Petten

1977-01-01

A method is presented for the determination of chromium in sea- and fresh water. Chromium is concentrated on activated carbon from a neutral solution after a previous reduction of chromate with sodium sulfite at pH 1.5. The adsorption conditions, acidity, concentrations, amount of carbon, stirring-time, sample-volume, salinity, the influence of storage on the ratio of tervalent to hexavalent chromium, were investigated. The final determination of the total chromium content is performed by instrumental neutron-activation analysis. By preconcentration on activated carbon, a differentiation between tervalent and hexavalent chromium is possible. A separate determination of both species is not yet feasible due to the high carbon blank and to the necessity of measuring the adsorption percentage on carbon. The lower limit of determination, which depends on the value of the carbon blank, is 0.05 ..mu..g Cr/l with a precision of 20%. The determination is hampered by the considerable blank from the carbon. The use of activated carbon prepared from recrystallized sugar will probably improve the lower limit of determination and possibly allow the determination of chromate.

[The Family Questionnaire (FB-K) - A Short Version of the General Family Questionnaire and its Reliability and Validity].

Science.gov (United States)

Sidor, Anna; Cierpka, Manfred

2016-01-01

A standardized assessment of a family system plays a crucial role in family therapy research and diagnostic, as well as in a family therapy itself. A 14-item short version of the General Family Questionnaire (FB-K) was designed to get a tool for assessing family functionality that is low time-consuming. The short version was developed by factor analysis from the long version FA-A. The quality criteria of the family questionnaire were verified in a control sample of 208 high-risk families four months after the birth of their child. The new family questionnaire demonstrates a very good reliability and a satisfactory 8-months-stability. The concurrent validity with the FACES scale "cohesion" is assured. Regarding the construct validity a positive correlation to the feeling of coherence was found. The family questionnaire shows a negative correlation to the maternal postnatal depressive symptoms, the degree of maternal stress burden, the dysfunctionality of the mother-child-relationship and impaired bonding. The values taken from a norm sample with infants are higher by trend and in the sample with children under 18 do not deviate from the values of the risk sample. FB-K covers two aspects of family functioning, the bond between family members and their willingness to communicate. The internal consistency of FB-K is excellent, the criterion and the construct validity are good.

Quality-control design for surface-water sampling in the National Water-Quality Network

Science.gov (United States)

Riskin, Melissa L.; Reutter, David C.; Martin, Jeffrey D.; Mueller, David K.

2018-04-10

The data-quality objectives for samples collected at surface-water sites in the National Water-Quality Network include estimating the extent to which contamination, matrix effects, and measurement variability affect interpretation of environmental conditions. Quality-control samples provide insight into how well the samples collected at surface-water sites represent the true environmental conditions. Quality-control samples used in this program include field blanks, replicates, and field matrix spikes. This report describes the design for collection of these quality-control samples and the data management needed to properly identify these samples in the U.S. Geological Survey’s national database.

Proposal for the award of two contracts for the supply of fine-blanked austenitic steel collars for the cold masses of the LHC superconducting dipole magnets

CERN Document Server

1999-01-01

This document concerns the award of two contracts for the supply of 12 500 000 fine-blanked austenitic steel collars in three different shapes and of two different types for the cold masses of the LHC superconducting dipole magnets. Following a market survey carried out among 70 firms in fourteen Member States and one firm in Japan, a call for tenders (IT-2469/LHC/LHC) was sent on 3 June 1999 to eleven firms in five Member States and one firm in Japan. By the closing date, CERN had received five tenders. The Finance Committee is invited to agree to the negotiation of two contracts with: - MALVESTITI (IT) for the supply of up to 7 812 500 fine-blanked austenitic steel collars, which represents 5/8 of the total quantity required for the cold masses of the LHC superconducting dipole magnets, for a total amount of up to 6 908 509 Swiss francs, subject to revision for contractual deliveries after 31 December 2001, with an option for the supply of up to 4 687 500 additional fine-blanked austenitic steel collars, wh...

Sample loading for C-14 measurement in the simulated organic solvent waste from a CANDU Nuclear Power Plant

International Nuclear Information System (INIS)

Dianu, Magdalena; Podina, C.; Nita, Valentina

2005-01-01

Full text: Sample preparation is a critical step in obtaining accurate results in scintillation counting. Standard (22 ml) glass and plastic vials were used in these experiments. The preliminary research was conducted using glass vials to allow visual verification that a homogeneous solution is obtained at the desired cocktail/sample ratio. Then, the research was moved into plastic vials to reduce backgrounds and improve the counting rate. Samples were counted in a Model 2100 TR Packard TRI-CARB liquid scintillation analyzer. The paper mainly contains: - Composition and data about liquid scintillation cocktails used (tables); - Characterization of radioactive waste - organic solvent contaminated with C-14; - Sample loading (tables); - Efficiency vs Sample Loading - for each cocktail used. Organic solvent sample volumes were added to the vials in 0.5 ml increments from 1 ml to 2 ml. Then, the liquid scintillation cocktail was added so that the sample-cocktail volume was 20 ml. Each vial was shaken vigorously for several seconds after each addition to ensure homogeneity and count. Blank vials were prepared using C-14-free organic solvent samples in the same sample-cocktail proportions. After at least two hours, the samples and blank vials were counted for ten minutes, using a Packard counter. (authors)

Procedure for independently estimating blanks and uncertainties for measured values of 90Sr and 137Cs concentrations in the Atlantic Ocean

International Nuclear Information System (INIS)

Kupferman, S.L.; Livingston, H.D.

1979-01-01

A procedure has been developed for independently estimating blanks and measurement uncertainties for measured values of 90 Sr and 137 CS concentrations in the Atlantic Ocean. The procedure depends on delineation of a region in the Atlantic Ocean which has never contained measurable quantities of these fission products. Such a region is defined. A simple model, with supporting data, is used to show that reported 137 Cs inventories in deep ocean sediments could have accumulated without ever raising concentrations of 137 Cs in this tracer-free volume above minimum detectable limits. Several examples are presented to show that the use of the procedure results in a substantial improvement in the quality of 90 Sr and 137 Cs data. The method is applicable to any laboratory that has determined 9 πSr and 137 Cs concentrations in samples collected from within the tracer-free volume. 10 refs

Use of fission track analysis technique for the determination of MicroBequerel level of {sup 239}Pu in urine samples from radiation workers handling MOX fuel

Energy Technology Data Exchange (ETDEWEB)

Yadav, J.R., E-mail: yadav_jogendra@rediffmail.co [Health Physics Laboratory, Health Physics Division, BARC, Tarapur 401502 (India); Rao, D.D.; Kumar, Ranjeet [Health Physics Laboratory, Health Physics Division, BARC, Tarapur 401502 (India); Aggarwal, S.K. [Fuel chemistry Division, BARC, Trombay, Mumbai 400085 (India)

2011-07-15

Fission track analysis (FTA) technique for the determination of {sup 239}Pu excreted through urine has been standardized using blank samples, tracer and {sup 239}Pu spikes. Double stage anion exchange separation protocol has been applied and an average radiochemical recovery of {sup 239}Pu of 18% was obtained. An average track registration efficiency of 11 tracks per {mu}Bq of {sup 239}Pu, irradiated to 0.35x10{sup 17} neutron fluence was established. Reagent blank urine samples from 11 controlled subjects were analyzed by FTA and an average of 149{+-}14 tracks was obtained. Minimum detectable activity of 34 {mu}Bq L{sup -1} of urine sample was obtained and will be useful for monitoring chronic exposure cases handling MOX fuel.

Factorial structure of the German version of the dimensional assessment of personality pathology-basic questionnaire in clinical and nonclinical samples.

Science.gov (United States)

Pukrop, R; Gentil, I; Steinbring, I; Steinmeyer, E

2001-10-01

The Dimensional Assessment of Personality Pathology-Basic Questionnaire (DAPP-BQ) assesses 18 traits to provide a systematic representation of the overall domain of personality disorders. We tested the cross-cultural stability of the prediction that four higher-order factors (Emotional Dysregulation, Dissocial Behavior, Inhibitedness, and Compulsivity) underlie the 18 basic traits. A total of 81 patients who were primarily treated for an Axis II personality disorder and N = 166 healthy control patients completed the German version of the DAPP-BQ. Results clearly confirmed cross-cultural stability of the postulated four-factor structure in both samples, accounting for 74.7% (clinical sample), and 65.7% (nonclinical sample) of the total variance. All four higher-order factors showed specific correlational relationships with dimensional assessments of DSM-IV personality disorders.

A questionnaire to measure melanoma risk, knowledge and protective behaviour: assessing content validity in a convenience sample of Scots and Australians.

Science.gov (United States)

Gillespie, Helen S; Watson, Tony; Emery, Jon D; Lee, Amanda J; Murchie, Peter

2011-08-25

The aim of this study was to assess the content validity of a questionnaire to measure melanoma risk, knowledge and protective behaviour in a convenience sample of Scots and Australians. Australia has the highest melanoma incidence worldwide but has developed a culture of skin cancer avoidance with a long history of skin cancer primary prevention campaigns of proven effectiveness. Scotland has lower incidence, but has shown a greater rate of increase between 1985 and 2007. There is an urgent need in Scotland, therefore, to identify those groups at greatest risk and provide them with effective preventative advice. A self-administered postal survey was completed by four groups formed from convenience samples in two geographical locations (Northeast Scotland and Western Australia). In univariate analysis scores on personal risk, level of concern, protective behaviour, and knowledge were compared by nationality, previous skin cancer diagnosis and personally knowing someone with melanoma. Multivariate linear regression analysis modelled the influence of potential predictor variables upon each of the scores. 540 people completed the questionnaire, 273 Scots (50.6%). 133 (24.6%) Scots and 83 (15.4%) Australians previously had melanoma or non-melanoma skin cancer, whilst 120 (22.2%) Scots and 190 (35.2%) Australians personally knew someone with melanoma. Australians had higher knowledge (p behaviour (p behaviours in Australians than in Scottish people. This was expected and supports the content validity of the questionnaire and its value as a future research tool in the Scottish population.

Spectrophotometric determination of trace and ultratrace levels of boron in silicon and chlorosilane samples

International Nuclear Information System (INIS)

Chen, J.S.; Lin, H.M.; Yang, M.H.

1991-01-01

Spectrophotometric methods for the determination of boron in the low μg/g and ng/g range in high-purity silicon and dichloro- and trichlorosilanes were investigated in detail. The procedures established involve dissolution of silicon samples and the hydrolyzed products of chlorosilane samples in hydrofluoric acid-containing reagents followed by evaporation of the silicon matrix as H 2 SiF 6 . The boron retained in the treated sample solution was then determined by a spectrophotometric method using carminic acid as a chromatic reagent. Special effort has been paid to the control of the analytical blank and reproducible determination of boron. The results indicate that addition of mannitol and proper control of the evaporation process are effective in preventing volatilization of boron during the evaporation of silicon matrix and can thus attain high recovery of boron and reproducible analysis. Through meticulous control of the analytical blank and experimental conditions, the limit of detection for boron determination with the established method can be as low as ng/g levels. Application of the methods to the determination of boron in various stages of purification of silicon and trichlorosilane as well as in borophosphosilicate film was conducted. (orig.)

Cultural adaptation and psychometric properties of the family questionnaire in a Brazilian sample of relatives of schizophrenia outpatients.

Science.gov (United States)

Zanetti, Ana C G; Wiedemann, Georg; Dantas, Rosana A S; Hayashida, Miyeko; de Azevedo-Marques, João M; Galera, Sueli A F

2013-06-01

To evaluate the internal reliability and validity of the Brazilian Portuguese version of the Family Questionnaire among families of schizophrenia outpatients. The main studies about the family environment of schizophrenia patients are related to the concept of Expressed Emotion. There is currently no instrument to evaluate this concept in Brazil that is easily applicable and comparable with studies from other countries. Methodological and cross-sectional research design. A convenience sample of 130 relatives of schizophrenia outpatients was selected. The translation and cultural adaptation of the instrument involved experts in mental health and experts in the German language and included back translation, semantic evaluation of items and pretesting of the instrument with 30 relatives of schizophrenia outpatients. The psychometric properties of the instrument were studied with another 100 relatives, which fulfilled the requirements for the Brazilian Portuguese version of the instrument. The psychometric properties of the instrument were assessed by construct validity (using an analysis of its key components, comparisons between distinct groups-convergent validity with the Antonovsky's Sense of Coherence Scale) and reliability (checking the internal consistency of its items and its test-retest reproducibility). The analysis of main components confirmed dimensionality patterns that were comparable between the original and adapted versions. In two domains of the instrument, critical comments and emotional over-involvement had moderate and significant correlations, respectively, with Antonovsky's Sense of Coherence Scale, appropriate values of Cronbach's alpha and strong and significant correlations, respectively, in test-retest reproducibility. We observed significant differences between distinct groups of parents in the category of emotional over-involvement. We conclude that the Portuguese-adapted version of the Family Questionnaire is valid and reliable for the

Cross-cultural measurement invariance of the General Health Questionnaire-12 in a German and a Colombian population sample.

Science.gov (United States)

Romppel, Matthias; Hinz, Andreas; Finck, Carolyn; Young, Jeremy; Brähler, Elmar; Glaesmer, Heide

2017-12-01

While the General Health Questionnaire, 12-item version (GHQ-12) has been widely used in cross-cultural comparisons, rigorous tests of the measurement equivalence of different language versions are still lacking. Thus, our study aims at investigating configural, metric and scalar invariance across the German and the Spanish version of the GHQ-12 in two population samples. The GHQ-12 was applied in two large-scale population-based samples in Germany (N = 1,977) and Colombia (N = 1,500). To investigate measurement equivalence, confirmatory factor analyses were conducted in both samples. In the German sample mean GHQ-12 total scores were higher than in the Colombian sample. A one-factor model including response bias on the negatively worded items showed superior fit in the German and the Colombian sample; thus both versions of the GHQ-12 showed configural invariance. Factor loadings and intercepts were not equal across both samples; thus GHQ-12 showed no metric and scalar invariance. As both versions of the GHQ-12 did not show measurement equivalence, it is not recommendable to compare both measures and to conclude that mental distress is higher in the German sample, although we do not know if the differences are attributable to measurement problems or represent a real difference in mental distress. The study underlines the importance of measurement equivalence in cross-cultural comparisons. Copyright © 2017 John Wiley & Sons, Ltd.

Application Of CO2 Lasers To High Speed Blanking

Science.gov (United States)

Grenier, L. E.

1986-11-01

While laser cutting of sheetmetal has attained wide acceptance in the automotive industry for the purposes of prototyping and very limited preproduction work, the production rates possible with currently available systems have precluded the use of this technique in a production environment. The device design to be described embodies a high speed X-Y positioner carrying a cutting head with limited Z-axis capability. This approach confers two main benefits, first, production rate is limited only by laser power, since the positioner technology selected will permit movement at rates up to 1.5 m/s (60 in/s), second, the use of a high speed non-contact surface follower to control the Z-axis movement reduces the need to clamp the workpiece rigidly to a precision reference surface. The realized reduction of the clamping requirement permits some latitude in the feed methods that can be employed, allowing the use of coil or sheet feeding as appropriate. The author will provide estimated production rates for the proposed design and demonstrate that a suitable choice of laser source and material feed will permit the production of parts at a rate and cost comparable to conventional blanking with the advantage of much greater flexibility and reduced retooling time.

African primary care research: performing surveys using questionnaires.

Science.gov (United States)

Govender, Indiran; Mabuza, Langalibalele H; Ogunbanjo, Gboyega A; Mash, Bob

2014-04-25

The aim of this article is to provide practical guidance on conducting surveys and the use of questionnaires for postgraduate students at a Masters level who are undertaking primary care research. The article is intended to assist with writing the methods section of the research proposal and thinking through the relevant issues that apply to sample size calculation, sampling strategy, design of a questionnaire and administration of a questionnaire. The articleis part of a larger series on primary care research, with other articles in the series focusing on the structure of the research proposal and the literature review, as well as quantitative data analysis.

Status report on sample preparation facilities for {sup 14}C analysis at the new CologneAMS center

Energy Technology Data Exchange (ETDEWEB)

Rethemeyer, J., E-mail: janet.rethemeyer@uni-koeln.de [Institute of Geology and Mineralogy, University of Cologne, 50674 Cologne (Germany); Fueloep, R.-H.; Hoefle, S. [Institute of Geology and Mineralogy, University of Cologne, 50674 Cologne (Germany); Wacker, L. [Ion Beam Physics, ETH Zuerich, 8093 Zuerich (Switzerland); Heinze, S. [Institute of Nuclear Physics, University of Cologne, 50674 Cologne (Germany); Hajdas, I. [Ion Beam Physics, ETH Zuerich, 8093 Zuerich (Switzerland); Patt, U.; Koenig, S.; Stapper, B. [Institute of Geology and Mineralogy, University of Cologne, 50674 Cologne (Germany); Dewald, A. [Institute of Nuclear Physics, University of Cologne, 50674 Cologne (Germany)

2013-01-15

The new AMS facility at University of Cologne (CologneAMS), Germany, was established in 2010 with the delivery of the HVE 6 MV Tandetron AMS, which will be used for {sup 14}C, {sup 26}Al, {sup 36}Cl, {sup 41}Ca, {sup 129}I, {sup 239}U and {sup 244}Pu analyses. Parallel to the AMS installation the radiocarbon group has started to set up and test sample preparation methods and instruments for different materials. We present first results of reference and standard materials that have been processed and graphitized in our lab and measured at the ETH and CologneAMS facilities. The graphitization blank and its influence on small samples sizes processed with an automated graphitization system have been determined. Work on isolation of individual organic compounds with a preparative gas chromatography system has been started. The focus of our future work will be on reducing process blank levels and sample sizes as well as on the application of compound-specific radiocarbon analyses in (paleo-) environmental research.

Development and Validation of a Questionnaire on Breastfeeding Intentions, Attitudes and Knowledge of a Sample of Croatian Secondary-School Students.

Science.gov (United States)

Čatipović, Marija; Marković, Martina; Grgurić, Josip

2018-04-27

Validating a questionnaire/instrument before proceeding to the field for data collection is important. An 18-item breastfeeding intention, 39-item attitude and 44-item knowledge questionnaire was validated in a Croatian sample of secondary-school students ( N = 277). For the intentions, principal component analysis (PCA) yielded a four-factor solution with 8 items explaining 68.3% of the total variance. Cronbach’s alpha (0.71) indicated satisfactory internal consistency. For the attitudes, PCA showed a seven-factor structure with 33 items explaining 58.41% of total variance. Cronbach’s alpha (0.87) indicated good internal consistency. There were 13 knowledge questions that were retained after item analysis, showing good internal consistency (KR20 = 0.83). In terms of criterion validity, the questionnaire differentiated between students who received breastfeeding education compared to students who were not educated in breastfeeding. Correlations between intentions and attitudes (r = 0.49), intentions and knowledge (r = 0.29), and attitudes and knowledge (r = 0.38) confirmed concurrent validity. The final instrument is reliable and valid for data collection on breastfeeding. Therefore, the instrument is recommended for evaluation of breastfeeding education programs aimed at upper-grade elementary and secondary school students.

Development of a cohesion questionnaire for youth: the Youth Sport Environment Questionnaire.

Science.gov (United States)

Eys, Mark; Loughead, Todd; Bray, Steven R; Carron, Albert V

2009-06-01

The purpose of the current study was to initiate the development of a psychometrically sound measure of cohesion for youth sport groups. A series of projects were undertaken in a four-phase research program. The initial phase was designed to garner an understanding of how youth sport group members perceived the concept of cohesion through focus groups (n = 56), open-ended questionnaires (n = 280), and a literature review. In Phase 2, information from the initial projects was used in the development of 142 potential items and content validity was assessed. In Phase 3, 227 participants completed a revised 87-item questionnaire. Principal components analyses further reduced the number of items to 17 and suggested a two-factor structure (i.e., task and social cohesion dimensions). Finally, support for the factorial validity of the resultant questionnaire was provided through confirmatory factor analyses with an independent sample (n = 352) in Phase 4. The final version of the questionnaire contains 16 items that assess task and social cohesion in addition to 2 negatively worded spurious items. Specific issues related to assessing youth perceptions of cohesion are discussed and future research directions are suggested.

Comparing the Morningness-Eveningness Questionnaire and Munich ChronoType Questionnaire to the Dim Light Melatonin Onset.

Science.gov (United States)

Kantermann, Thomas; Sung, Haein; Burgess, Helen J

2015-10-01

The dim light melatonin onset (DLMO) is the most reliable measure of central circadian timing in humans. However, it is not always possible to measure the DLMO because sample collection has to occur in the hours before usual sleep onset, it requires staff support and considerable participant effort, and it is relatively expensive. Questionnaires that ask people about the timing of their behavior, such as their sleep, may provide an easier and less expensive estimate of circadian timing. The objective of this analysis was to compare the MEQ score derived from the Morningness-Eveningness Questionnaire (MEQ) and the MSFsc derived from the Munich ChronoType Questionnaire (MCTQ) to the DLMO in the largest sample to date (N = 60). Our hypothesis was that MSFsc would correlate more highly with the DLMO than MEQ score. Our sample of 36 healthy controls and 24 patients with delayed sleep phase disorder ranged in age from 18 to 62 years. All participants slept at times of their own choosing for a week before the assessment of their DLMO. The DLMO correlated significantly with both the MEQ score (r = -0.70, p light or exogenous melatonin treatment, as this could result in the mistiming of these treatments relative to the DLMO, thereby potentially worsening circadian misalignment. © 2015 The Author(s).

A coupled analysis of fluid flow, heat transfer and deformation behavior of solidifying shell in continuously cast beam blank

Energy Technology Data Exchange (ETDEWEB)

Lee, Jung Eui; Yeo, Tae Jung; Oh, Kyu Hwan; Yoon, Jong Kyu [School of Materials Science and Engineering, Seoul Nat` l Univ., Seoul (Korea, Republic of); Han, Heung Nam [Oxford Center for Advanced Materials and Composites, Department of Materials, Univ. of Oxford (United Kingdom)

1998-12-31

A mathematical model for a coupled analysis of fluid flow, heat transfer and deformation behavior in the continuously cast beam blank has been developed. The fluid flow, heat transfer and solidification in the mold region were analyzed with 3-dimensional finite difference method (FDM) based on control volume method. A body fitted coordinate system was introduced for the complex geometry of the beam blank. The effects of turbulence and natural convection of molten steel were taken into account in determining the fluid flow in the strand. The thermo-elasto-plastic deformation behavior in the cast strand and the formation of air gap between the solidifying shell and the mold were analyzed by the finite element method (FEM) using the 2-dimensional slice temperature profile calculated by the FDM. The heat flow between the strand and the mold was evaluated by the coupled analysis between the fluid flow-heat transfer analysis and the thermo-elasto-plastic stress analysis. In order to determine the solid fraction in the mushy zone, the microsegregation of solute element was assessed. The effects of fluid flow on the heat transfer, the solidification of steel and the distribution of shell thickness during the casting of the beam blank were simulated. The deformation behavior of the solidifying shell and the possibility of cracking of the strand were also investigated. The recirculating flows were developed in the regions of the web and the flange tip. The impinging of the inlet flow from the nozzle retarded the growing of solidifying shell in the regions of the fillet and the flange. The air gap between the strand and the mold was formed near the region of the corner of the flange tip. At the initial stage of casting, the probability of the surface cracking was high in the regions of the fillet and the flange tip. After the middle stage of casting, the internal cracking was predicted in the regions of the flange tip, and between the fillet and the flange tip. (author) 38

A coupled analysis of fluid flow, heat transfer and deformation behavior of solidifying shell in continuously cast beam blank

Energy Technology Data Exchange (ETDEWEB)

Lee, Jung Eui; Yeo, Tae Jung; Oh, Kyu Hwan; Yoon, Jong Kyu [School of Materials Science and Engineering, Seoul Nat`l Univ., Seoul (Korea, Republic of); Han, Heung Nam [Oxford Center for Advanced Materials and Composites, Department of Materials, Univ. of Oxford (United Kingdom)

1997-12-31

A mathematical model for a coupled analysis of fluid flow, heat transfer and deformation behavior in the continuously cast beam blank has been developed. The fluid flow, heat transfer and solidification in the mold region were analyzed with 3-dimensional finite difference method (FDM) based on control volume method. A body fitted coordinate system was introduced for the complex geometry of the beam blank. The effects of turbulence and natural convection of molten steel were taken into account in determining the fluid flow in the strand. The thermo-elasto-plastic deformation behavior in the cast strand and the formation of air gap between the solidifying shell and the mold were analyzed by the finite element method (FEM) using the 2-dimensional slice temperature profile calculated by the FDM. The heat flow between the strand and the mold was evaluated by the coupled analysis between the fluid flow-heat transfer analysis and the thermo-elasto-plastic stress analysis. In order to determine the solid fraction in the mushy zone, the microsegregation of solute element was assessed. The effects of fluid flow on the heat transfer, the solidification of steel and the distribution of shell thickness during the casting of the beam blank were simulated. The deformation behavior of the solidifying shell and the possibility of cracking of the strand were also investigated. The recirculating flows were developed in the regions of the web and the flange tip. The impinging of the inlet flow from the nozzle retarded the growing of solidifying shell in the regions of the fillet and the flange. The air gap between the strand and the mold was formed near the region of the corner of the flange tip. At the initial stage of casting, the probability of the surface cracking was high in the regions of the fillet and the flange tip. After the middle stage of casting, the internal cracking was predicted in the regions of the flange tip, and between the fillet and the flange tip. (author) 38

Comparison of two microwave-assisted sample digestions of sediment and soils for trace metals using ICP-MS. HNO3 and HNO3/HF (P2)

International Nuclear Information System (INIS)

Howard, C.; Vandervort, A.; Bloom, N.S.

2002-01-01

Full text: Our goal was to develop an accurate and dependable digestion method for extracting trace metals from soil and sediment samples. This method would be applied to analytes at low concentrations in various sediments, including soil, contaminated soil, and marine sediment. Analysis was performed for a wide spectrum of trace metals (Ag, Al, As, Cd, Ce, Co, Cr, Cu, Eu, Fe, Hf, Ho, La, Mg, Mn, Mo, Nd, Ni, Pb, Th, Ti, Tl, Sb, Se, Sm, Sn, Yb, and Zn) using an Elan 6000 ICP-MS (Perkin-Elmer). Two sample preparation procedures were adjusted and applied to three certified reference materials (CRM); NIST2709, NIST2710, and MESS-3. The first procedure involved digestion with 10 ml nitric acid (HNO3) at 180 o C for 25 min in a microwave (Milestone-ETHOS plus). The process included four acid blanks, one blank spike, three replicates of each CRM, and one matrix spike on each of the CRM. The second procedure involved digestion with 8 ml HNO3, and 4 ml hydrofluoric acid (HF) at 180 o C for 25 min in the microwave. Digestion included four acid blanks, one blank spike, three reps of each CRM, and one matrix spike on each of the CRM. Each method proved to be robust and accurate for different analytes. Rare earth elements worked particularly well using the HNO 3 digest. By utilizing both digestions, all trace metals examined were successfully and completely extracted. (author)

A questionnaire to measure melanoma risk, knowledge and protective behaviour: Assessing content validity in a convenience sample of Scots and Australians

Directory of Open Access Journals (Sweden)

Lee Amanda J

2011-08-01

Full Text Available Abstract Background The aim of this study was to assess the content validity of a questionnaire to measure melanoma risk, knowledge and protective behaviour in a convenience sample of Scots and Australians. Australia has the highest melanoma incidence worldwide but has developed a culture of skin cancer avoidance with a long history of skin cancer primary prevention campaigns of proven effectiveness. Scotland has lower incidence, but has shown a greater rate of increase between 1985 and 2007. There is an urgent need in Scotland, therefore, to identify those groups at greatest risk and provide them with effective preventative advice. Method A self-administered postal survey was completed by four groups formed from convenience samples in two geographical locations (Northeast Scotland and Western Australia. In univariate analysis scores on personal risk, level of concern, protective behaviour, and knowledge were compared by nationality, previous skin cancer diagnosis and personally knowing someone with melanoma. Multivariate linear regression analysis modelled the influence of potential predictor variables upon each of the scores. Results 540 people completed the questionnaire, 273 Scots (50.6%. 133 (24.6% Scots and 83 (15.4% Australians previously had melanoma or non-melanoma skin cancer, whilst 120 (22.2% Scots and 190 (35.2% Australians personally knew someone with melanoma. Australians had higher knowledge (p , level of concern (p and protective behaviour (p scores than the Scottish. Australian nationality was the strongest independent predictor of a higher knowledge score (p , followed by a previous skin cancer diagnosis (p = 0.003, personal knowledge of someone with melanoma (p = 0.011, female gender (p = 0.005 and higher education status (p (R2 = 0.163. Conclusion The questionnaire detected higher levels of knowledge and skin cancer protective behaviours in Australians than in Scottish people. This was expected and supports the content

Validation of a 16-Item Short Form of the Czech Version of the Experiences in Close Relationships Revised Questionnaire in a Representative Sample

Czech Academy of Sciences Publication Activity Database

Kaščáková, N.; Husárová, D.; Hašto, J.; Kolarčik, P.; Poláčková Šolcová, Iva; Madarasová Gecková, A.; Tavel, P.

2016-01-01

Roč. 119, č. 3 (2016), s. 804-825 ISSN 0033-2941 Institutional support: RVO:68081740 Keywords : Short form of the ECR-R * Experiences in Close Relationships Revised Questionnaire * validation * attachment anxiety * attachment avoidance * attachment styles * representative sample Subject RIV: AN - Psychology Impact factor: 0.629, year: 2016

The determination of chromium in water samples by neutron activation analysis after preconcentration on activated carbon

International Nuclear Information System (INIS)

Sloot, H.A. van der

1977-01-01

A method is presented for the determination of chromium in sea- and fresh water. Chromium is concentrated on activated carbon from a neutral solution after a previous reduction of chromate with sodium sulfite at pH 1.5. The adsorption conditions, acidity, concentrations, amount of carbon, stirring-time, sample-volume, salinity, the influence of storage on the ratio of tervalent to hexavalent chromium, were investigated. The final determination of the total chromium content is performed by instrumental neutron-activation analysis. By preconcentration on activated carbon, a differentiation between tervalent and hexavalent chromium is possible. A separate determination of both species is not yet feasible due to the high carbon blank and to the necessity of measuring the adsorption percentage on carbon. The lower limit of determination, which depends on the value of the carbon blank, is 0.05 μg Cr/l with a precision of 20%. The determination is hampered by the considerable blank from the carbon. The use of activated carbon prepared from recrystallized sugar will probably improve the lower limit of determination and possibly allow the determination of chromate. (T.G.)

Quality Control Samples for the Radiological Determination of Tritium in Urine Samples

International Nuclear Information System (INIS)

Ost'pezuk, P.; Froning, M.; Laumen, S.; Richert, I.; Hill, P.

2004-01-01

The radioactive decay product of tritium is a low energy beta that cannot penetrate the outer dead layer of human skin. Therefore , the main hazard associated with tritium is internal exposure. In addition, due to the relatively long half life and short biological half life, tritium must be ingested in large amounts to pose a significant health risk. On the other hand, the internal exposure should be kept as low as practical. For incorporation monitoring of professional radiation workers the quality control is of utmost importance. In the Research Centre Juelich GmbH (FZJ) a considerable fraction of monitoring by excretion analysis relates to the isotope Tritium. Usually an aliquot of an urine sample is mixed with a liquid scintillator and measured in a liquid scintillation counter. Quality control samples in the form of three kind of internal reference samples (blank, reference samples with low activity and reference sample with elevated activity) were prepared from a mixed, Tritium (free) urine samples. 1 ml of these samples were pipetted into a liquid scintillation vial. In the part of theses vials a known amounts of Tritium were added. All these samples were stored at 20 degrees. Based on long term use of all these reference samples it was possible to construct appropriate control charts with the upper and lower alarm limits. Daily use of these reference samples decrease significantly the risk for false results in original urine with no significant increase of the determination time. (Author) 2 refs

Psychosis risk screening: Validation of the youth psychosis at-risk questionnaire - brief in a community-derived sample of adolescents.

Science.gov (United States)

Fonseca-Pedrero, Eduardo; Ortuño-Sierra, Javier; Chocarro, Edurne; Inchausti, Felix; Debbané, Martin; Bobes, Julio

2017-12-01

There have been several attempts to identify individuals potentially at high risk for psychotic-spectrum disorders using brief screening measures. However, relatively few studies have tested the psychometric properties of the psychosis screening measures in representative samples of adolescents. The main purpose of the present study was to analyse the prevalence, factorial structure, measurement invariance across gender, and reliability of the Youth Psychosis At-Risk Questionnaire - Brief (YPARQ-B) in a community-derived sample of adolescents. Additionally, the relationship between YPARQ-B, depressive symptoms, psychopathology, stress manifestations, and prosocial skills was analysed. One thousand and twenty students from high schools participated in a cross-sectional survey. The YPARQ-B, the Reynolds Adolescent Depression Scale, the Strengths and Difficulties Questionnaire, and the Student Stress Inventory - Stress Manifestations were used. A total of 85.1% of the total sample self-reported at least one subclinical psychotic experience. We observed a total of 10.9% of adolescents with a cutoff score of ≥11 or 6.8% with a cutoff score of ≥13. The analysis of internal structure of the YPARQ-B yielded an essentially unidimensional structure. The YPARQ-B scores showed measurement invariance across gender. The internal consistency of the YPARQ-B total score was 0.94. Furthermore, self-reported subclinical psychotic experiences were associated with depressive symptoms, emotional and behavioural problems, poor prosocial skills, and stress manifestations. These results would appear to indicate that YPARQ-B is a brief and easy tool to assess self-reported subclinical psychotic experiences in adolescents from the general population. The assessment of these experiences in community settings, and its associations with psychopathology, may help us to enhance the possibility of an early identification of adolescents potentially at risk for psychosis and mental health

Importance of questionnaire context for a physical activity question.

Science.gov (United States)

Jørgensen, M E; Sørensen, M R; Ekholm, O; Rasmussen, N K

2013-10-01

Adequate information about physical activity habits is essential for surveillance, implementing, and evaluating public health initiatives in this area. Previous studies have shown that question order and differences in wording result in systematic differences in people's responses to questionnaires; however, this has never been shown for physical activity questions. The aim was to study the influence of different formulations and question order on self-report physical activity in a population-based health interview survey. Four samples of each 1000 adults were drawn at random from the National Person Register. A new question about physical activity was included with minor differences in formulations in samples 1-3. Furthermore, the question in sample 2 was included in sample 4 but was placed in the end of the questionnaire. The mean time spent on moderate physical activity varied between the four samples from 57 to 100 min/day. Question order was associated with the reported number of minutes spent on moderate-intensity physical activity and with prevalence of meeting the recommendation, whereas physical inactivity was associated with the differences in formulation of the question. Questionnaire context influences the way people respond to questions about physical activity significantly and should be tested systematically in validation studies of physical activity questionnaires. © 2012 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Incremental Validity of the Durand Adaptive Psychopathic Traits Questionnaire Above Self-Report Psychopathy Measures in Community Samples.

Science.gov (United States)

Durand, Guillaume

2018-05-03

Although highly debated, the notion of the existence of an adaptive side to psychopathy is supported by some researchers. Currently, 2 instruments assessing psychopathic traits include an adaptive component, which might not cover the full spectrum of adaptive psychopathic traits. The Durand Adaptive Psychopathic Traits Questionnaire (DAPTQ; Durand, 2017 ) is a 41-item self-reported instrument assessing adaptive traits known to correlate with the psychopathic personality. In this study, I investigated in 2 samples (N = 263 and N = 262) the incremental validity of the DAPTQ over the Psychopathic Personality Inventory-Short Form (PPI-SF) and the Triarchic Psychopathy Measure (TriPM) using multiple criterion measures. Results showed that the DAPTQ significantly increased the predictive validity over the PPI-SF on 5 factors of the HEXACO. Additionally, the DAPTQ provided incremental validity over both the PPI-SF and the TriPM on measures of communication adaptability, perceived stress, and trait anxiety. Overall, these results support the validity of the DAPTQ in community samples. Directions for future studies to further validate the DAPTQ are discussed.

Evaluation of Quality-Assurance/Quality-Control Data Collected by the U.S. Geological Survey from Wells and Springs between the Southern Boundary of the Idaho National Engineering and Environmental Laboratory and the Hagerman Area, Idaho, 1989 through 1995

Energy Technology Data Exchange (ETDEWEB)

Williams, L.M.; Bartholomay, R.C.; Campbell, L.J.

1998-10-01

The U.S. Geological (USGS) and the Idaho Department of Water Resources, in cooperation with the U.S. Department of Energy, collected and analyzed water samples to monitor the water quality of the Snake River Plain aquifer from the southern boundary of the Idaho National Engineering and Environmental Laboratory to the Hagerman area, Idaho. Concurrently, replicate samples and blank samples were collected and analyzed as part of the quality-assurance/quality-control program. Samples were analyzed from inorganic constituents, gross radioactivity and radionuclides, organic constituents, and stable isotopes. To evaluate the precision of field and laboratory methods, analytical results of the water-quality and replicate samples were compared statistically for equivalence on the basis of the precision associated with each result. Statistical comparisons of the data indicated that 95 percent of the results of the replicate pairs were equivalent. Blank-sample analytical results indicated th at the inorganic blank water and volatile organic compound blank water from the USGS National Water Quality Laboratory and the distilled water from the Idaho Department of Water Resources were suitable for blanks; blank water from other sources was not. Equipment-blank analytical results were evaluated to determine if a bias had been introduced and possible sources of bias. Most equipment blanks were analyzed for trace elements and volatile organic compounds; chloroform was found in one equipment blank. Two of the equipment blanks were prepared after collection and analyses of the water-quality samples to determine whether contamination had been introduced during the sampling process. Results of one blank indicated that a hose used to divert water away from pumps and electrical equipment had contaminated the samples with some volatile organic compounds. Results of the other equipment blank, from the apparatus used to filter dissolved organic carbon samples, indicated that the filtering

A meta-analysis of the social communication questionnaire: Screening for autism spectrum disorder.

Science.gov (United States)

Chesnut, Steven R; Wei, Tianlan; Barnard-Brak, Lucy; Richman, David M

2017-11-01

The current meta-analysis examines the previous research on the utility of the Social Communication Questionnaire as a screening instrument for autism spectrum disorder. Previously published reports have highlighted the inconsistencies between Social Communication Questionnaire-screening results and formal autism spectrum disorder diagnoses. The variations in accuracy resulted in some researchers questioning the validity of the Social Communication Questionnaire. This study systematically examined the accuracy of the Social Communication Questionnaire as a function of the methodological decisions made by researchers screening for autism spectrum disorder over the last 15 years. Findings from this study suggest that the Social Communication Questionnaire is an acceptable screening instrument for autism spectrum disorder (area under the curve = 0.885). Variations in methodological decisions, however, greatly influenced the accuracy of the Social Communication Questionnaire in screening for autism spectrum disorder. Of these methodological variations, using the Current instead of the Lifetime version of the Social Communication Questionnaire resulted in the largest detrimental effect ( d = -3.898), followed by using the Social Communication Questionnaire with individuals younger than 4 years of age ( d = -2.924) and relying upon convenience samples ( d = -4.828 for clinical samples, -2.734 for convenience samples, and -1.422 for community samples). Directions for future research and implications for using the Social Communication Questionnaire to screen for autism spectrum disorder are discussed.

Quantitative analysis of untreated oil samples in in-air PIXE

International Nuclear Information System (INIS)

Sera, K.; Goto, S.; Takahashi, C.; Saitoh, Y.

2010-01-01

The method of quantitative analysis of oil samples in in-air PIXE has been developed on the basis of a standard-free method. The components of the continuous X-rays originated from air and backing film can be exactly subtracted using a blank spectrum after normalization by the yields of Ar K-α X-rays. The method was developed using nine oil samples including standard oils and its accuracy was confirmed by comparing the results with those obtained by the internal-standard method. Validity of the method for practical oil samples was confirmed for various kinds of oils such as engine, machine and cooking oils. It was found that the method is effective for various kinds of oils whatever elements we designate as an index element. (author)

Development and initial validation of the vaginal penetration cognition questionnaire (VPCQ) in a sample of women with vaginismus and dyspareunia.

Science.gov (United States)

Klaassen, Maaike; Ter Kuile, Moniek M

2009-06-01

Although the relevance of cognitions has been implicated in the etiology, explanatory models, and treatment of female sexual pain disorders, an instrument that assesses vaginal penetration cognitions is nonexistent. The aim of this study was to develop and to investigate the psychometric properties of the Vaginal Penetration Cognition Questionnaire (VPCQ). The VPCQ was explicitly designed to assess cognitions regarding vaginal penetration in women with vaginismus and dyspareunia. A sample of 247 Dutch women with a female sexual dysfunction (FSD; 122 women with lifelong vaginismus and 125 women with dyspareunia) and 117 women without sexual complaints completed the questionnaire. Factor analyses were only conducted in the sample of women with FSD. Validation measures were conducted in both women with and without FSD. All women completed the VPCQ and several additional questions regarding biographic and complaint characteristics. Conduction of factor analyses yielded five subscales regarding cognitions about vaginal penetration: "control cognitions,"catastrophic and pain cognitions,"self-image cognitions,"positive cognitions," and "genital incompatibility cognitions." Reliability of these five VPCQ subscales ranged from 0.70 to 0.83, and the test-retest correlations were satisfactory. The five VPCQ subscales were reasonably stable across demographic variables and demonstrated good discriminant validity. All five subscales were able to detect significant differences between women with and without FSD. Additionally, the four subscales of the VPCQ concerning negative cognitions demonstrated the ability to differentiate between the two samples of women with FSD. Women with lifelong vaginismus reported lower levels of perceived penetration control and higher levels of catastrophic and pain cognitions, negative self-image cognitions, and genital incompatibility cognitions, when compared with women with dyspareunia. The present study indicates that the VPCQ is a valid and

Determination of the anionic surfactant di(ethylhexyl) sodium sulfosuccinate in water samples collected from Gulf of Mexico coastal waters before and after landfall of oil from the Deepwater Horizon oil spill, May to October, 2010

Science.gov (United States)

Gray, James L.; Kanagy, Leslie K.; Furlong, Edward T.; McCoy, Jeff W.; Kanagy, Chris J.

2011-01-01

On April 22, 2010, the explosion on and subsequent sinking of the Deepwater Horizon oil drilling platform resulted in the release of crude oil into the Gulf of Mexico. At least 4.4 million barrels had been released into the Gulf of Mexico through July 15, 2010, 10 to 29 percent of which was chemically dispersed, primarily using two dispersant formulations. Initially, the dispersant Corexit 9527 was used, and when existing stocks of that formulation were exhausted, Corexit 9500 was used. Over 1.8 million gallons of the two dispersants were applied in the first 3 months after the spill. This report presents the development of an analytical method to analyze one of the primary surfactant components of both Corexit formulations, di(ethylhexyl) sodium sulfosuccinate (DOSS), the preliminary results, and the associated quality assurance/quality control (QA/QC) from samples collected from various points on the Gulf Coast between Texas and Florida. Seventy water samples and 8 field QC samples were collected before the predicted landfall of oil (pre-landfall) on the Gulf Coast, and 51 water samples and 10 field QC samples after the oil made landfall (post-landfall). Samples were collected in Teflon(Registered) bottles and stored at -20(degrees)C until analysis. Extraction of whole-water samples used sorption onto a polytetrafluoroethylene (PTFE) filter to isolate DOSS, with subsequent 50 percent methanol/water elution of the combined dissolved and particulate DOSS fractions. High-performance liquid chromatography/tandem mass spectrometry (LC/MS/MS) was used to identify and quantify DOSS by the isotope dilution method, using a custom-synthesized 13C4-DOSS labeled standard. Because of the ubiquitous presence of DOSS in laboratory reagent water, a chromatographic column was installed in the LC/MS/MS between the system pumps and the sample injector that separated this ambient background DOSS contamination from the sample DOSS, minimizing one source of blank contamination

Validation of the Caregiver Guilt Questionnaire (CGQ) in a sample of British dementia caregivers.

Science.gov (United States)

Roach, Louise; Laidlaw, Ken; Gillanders, David; Quinn, Kathryn

2013-12-01

Depression is well documented as a key outcome variable for dementia caregivers; however, guilt has been under-researched, which may be in part due to the lack of an appropriate measure. The Caregiver Guilt Questionnaire (CGQ) was originally developed and piloted with a Spanish population but has not yet been tested in an English-speaking population. A cross-sectional postal survey was undertaken with a sample of 221 dementia caregivers in the UK, as part of a larger study of dementia caregiver outcome measures. The five-factor structure identified for the CGQ in the Spanish sample was replicated in this study. The five factors, "guilt about doing wrong by the care recipient," "guilt about failing to meet the challenges of caregiving," 'guilt over experience of negative emotions in relation to caregiving," "guilt about self-care," and "guilt about neglecting other relatives" accounted for 60% of the variance. Internal consistencies for the whole scale and factors were acceptable, and convergent validity was established with the Zarit Burden Interview guilt factor. A higher score on the CGQ was associated with a higher score on the Center for Epidemiological Studies Depression scale (CES-D) and a new cut-off score of 22 was established, which predicted a clinical score on the CES-D with 80.0% sensitivity and 61.5% specificity. The replication of the five-factor structure suggests that these are relevant themes within the feelings of guilt to both Hispanic and British dementia caregivers. The CGQ has been demonstrated to be a valid measure for use with British dementia caregivers and is likely to be of use in clinical and research settings.

Revised final report for tank 241-AN-101, grab samples 1AN-95-1 through 1AN-95-7. Revision 1

International Nuclear Information System (INIS)

Esch, R.A.

1996-01-01

Six supernate grab samples and one field blank were taken from tank 241-AN-101. This report documents analyses performed in support of the Safety Screening program: differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), density by specific gravity (Sp.G.), and total alpha activity (AT)

Questionnaire on the measurement condition of distribution coefficient

International Nuclear Information System (INIS)

Takebe, Shinichi; Kimura, Hideo; Matsuzuru, Hideo

2001-05-01

The distribution coefficient is used for various transport models to evaluate the migration behavior of radionuclides in the environment and is very important parameter in environmental impact assessment of nuclear facility. The questionnaire was carried out for the purpose of utilizing for the proposal of the standard measuring method of distribution coefficient. This report is summarized the result of questionnairing on the sampling methods and storage condition, the pretreatment methods, the analysis items in the physical/chemical characteristics of the sample, and the distribution coefficient measuring method and the measurement conditions in the research institutes within country. (author)

Infant behaviour questionnaire - revised version: a psychometric study in a Portuguese sample.

Science.gov (United States)

Costa, Raquel; Figueiredo, Bárbara

2018-04-01

Although the original characteristics of temperament tend to remain constant over the course of development, environmental circumstances may influence infants' reactions and behaviour. Parents' reports of infant temperament are rich informants of infant behaviours in different contexts. This study aimed to examine the psychometric properties of the Portuguese version of the Infant Behaviour Questionnaire - Revised (IBQ-R) and test the adequacy of the original and other previously published structures to the Portuguese data. 330 mothers and 81 fathers of children aged between 3 and 12 months completed the Portuguese version of the IBQ-R. The confirmatory factorial analysis revealed a non-adequate model fit of the IBQ-R original structure to the Portuguese data; nonetheless, it did reveal an adequate model fit of a previous published IBQ-R structure. This structure, although only slightly different from the original one, seems to be more suitable for the Portuguese data. This study provides data that indicates that the IBQ-R is a reliable questionnaire to evaluate infant temperament in the Portuguese culture.

Reducing questionnaire length did not improve physician response rate: a randomized trial.

Science.gov (United States)

Bolt, Eva E; van der Heide, Agnes; Onwuteaka-Philipsen, Bregje D

2014-04-01

To examine the effect of reducing questionnaire length on the response rate in a physician survey. A postal four double-page questionnaire on end-of-life decision making was sent to a random sample of 1,100 general practitioners, 400 elderly care physicians, and 500 medical specialists. Another random sample of 500 medical specialists received a shorter questionnaire of two double pages. After 3 months and one reminder, all nonresponding physicians received an even shorter questionnaire of one double page. Total response was 64% (1,456 of 2,269 eligible respondents). Response rate of medical specialists for the four double-page questionnaire was equal to that of the two double-page questionnaire (190 and 191 questionnaires were returned, respectively). The total response rate increased from 53% to 64% after sending a short one double-page questionnaire (1,203-1,456 respondents). The results of our study suggest that reducing the length of a long questionnaire in a physician survey does not necessarily improve response rate. To improve response rate and gather more information, researchers could decide to send a drastically shortened version of the questionnaire to nonresponders. Copyright © 2014 Elsevier Inc. All rights reserved.

Bifactor analysis and construct validity of the Five Facet Mindfulness Questionnaire (FFMQ in non-clinical Spanish samples

Directory of Open Access Journals (Sweden)

Jaume eAguado

2015-04-01

Full Text Available The objective of the present study was to examine the dimensionality, reliability, and construct validity of the Five Facet Mindfulness Questionnaire (FFMQ in three Spanish samples using structural equation modelling (SEM. Pooling the FFMQ data from 3 Spanish samples (n= 1191, we estimated the fit of two competing models (correlated five-factor vs. bifactor via confirmatory factor analysis. The factorial invariance of the best fitting model across meditative practice was also addressed. The pattern of relationships between the FFMQ latent dimensions and anxiety, depression, and distress was analysed using SEM. FFMQ reliability was examined by computing the omega and omega hierarchical coefficients. The bifactor model, which accounted for the covariance among FFMQ items with regard to one general factor (mindfulness and five orthogonal factors (observing, describing, acting with awareness, non-judgment, and non-reactivity, fit the FFMQ structure better than the correlated five-factor model. The relationships between the latent variables and their manifest indicators were not invariant across the meditative experience. Observing items had significant loadings on the general mindfulness factor, but only in the meditator sub-sample. The SEM analysis revealed significant links between mindfulness and symptoms of depression and stress. When the general factor was partialled out, the acting with awareness facet did not show adequate reliability. The FFMQ shows a robust bifactor structure among Spanish individuals. Nevertheless, the Observing subscale does not seem to be adequate for assessing mindfulness in individuals without meditative experience.

Final report for tank 241-AN-102, grab samples 2AN-95-1 through 2AN-95-6 and 102-AN-1 through 102-AN-4

International Nuclear Information System (INIS)

Esch, R.A.

1996-01-01

Ten grab samples (2AN-95-1, 2, 3, 4A, 5A; 102-AN-1, 2, 3(A), 3(B), and 4) and one field blank (2AN-95-6) were taken from tank 241-AN-102. In support of the safety screening program, total organic carbon and cyanide were performed as secondary analyses because the differential scanning calorimetry results exceeded the notification limit. These were compared to safety screening limits at a confidence level of 95%. Waste compatibility analyses were performed on the 3 supernate samples and the field blank from the latest sampling event. Results presented in the 45 day and in this report show that the waste in Tank 241-AN-1D2 has energetics greater than 480 J/g (dry) and total organic carbon > 3 wt%; however, with a moisture content > 17 wt%, the tank may be considered ''conditionally'' safe in accordance with the Data Quality Objective to Support Resolution of the Organic Complexant Safety Issue

Psychometric Properties of the Alabama Parenting Questionnaire-Preschool Revision

Science.gov (United States)

Clerkin, Suzanne M.; Marks, David J.; Policaro, Katia L.; Halperin, Jeffrey M.

2007-01-01

The psychometric properties of the Alabama Parenting Questionnaire-Preschool Revision (APQ-PR) were explored in a sample of hyperactive-inattentive preschool children (N = 47) and nonimpaired controls (N = 113). A subset of parents completed the questionnaire on 2 occasions, approximately 1 year apart. Factor analysis revealed a 3-factor solution,…

[Questionnaire for the mobbing risk: CDL2.0].

Science.gov (United States)

Gilioli, R; Cassitto, M G; Campanini, P; Punzi, S; Consonni, D; Rengo, C; Fattorini, E; Foá, V

2005-01-01

The aim of the study is to develop and validate a questionnaire able to evaluate the risk of mobbing at the workplace. A multiple-choice questionnaire has been developed which contains, among the different items, only one revealing a mobbing situation. The questionnaire has been administered to two groups (group A--243 subjects in a mobbing situation and group B--63 subjects without exposure to mobbing) and the differences in the scores obtained have been analysed. The questionnaire has proved to be valid and reliable. The results show that the presence of five mobbing actions is sufficient to define the workplace situation as potentially at risk for mobbing. The study reveals some limits in the selection of the two samples thus needing some adjustment. However, the questionnaire, also in the present form, can be considered a tool able to detect the mobbing situations.

Design optimization of tailor-rolled blank thin-walled structures based on ɛ-support vector regression technique and genetic algorithm

Science.gov (United States)

Duan, Libin; Xiao, Ning-cong; Li, Guangyao; Cheng, Aiguo; Chen, Tao

2017-07-01

Tailor-rolled blank thin-walled (TRB-TH) structures have become important vehicle components owing to their advantages of light weight and crashworthiness. The purpose of this article is to provide an efficient lightweight design for improving the energy-absorbing capability of TRB-TH structures under dynamic loading. A finite element (FE) model for TRB-TH structures is established and validated by performing a dynamic axial crash test. Different material properties for individual parts with different thicknesses are considered in the FE model. Then, a multi-objective crashworthiness design of the TRB-TH structure is constructed based on the ɛ-support vector regression (ɛ-SVR) technique and non-dominated sorting genetic algorithm-II. The key parameters (C, ɛ and σ) are optimized to further improve the predictive accuracy of ɛ-SVR under limited sample points. Finally, the technique for order preference by similarity to the ideal solution method is used to rank the solutions in Pareto-optimal frontiers and find the best compromise optima. The results demonstrate that the light weight and crashworthiness performance of the optimized TRB-TH structures are superior to their uniform thickness counterparts. The proposed approach provides useful guidance for designing TRB-TH energy absorbers for vehicle bodies.

Validation of the Narcissistic Admiration and Rivalry Questionnaire Short Scale (NARQ-S) in convenience and representative samples.

Science.gov (United States)

Leckelt, Marius; Wetzel, Eunike; Gerlach, Tanja M; Ackerman, Robert A; Miller, Joshua D; Chopik, William J; Penke, Lars; Geukes, Katharina; Küfner, Albrecht C P; Hutteman, Roos; Richter, David; Renner, Karl-Heinz; Allroggen, Marc; Brecheen, Courtney; Campbell, W Keith; Grossmann, Igor; Back, Mitja D

2018-01-01

Due to increased empirical interest in narcissism across the social sciences, there is a need for inventories that can be administered quickly while also reliably measuring both the agentic and antagonistic aspects of grandiose narcissism. In this study, we sought to validate the factor structure, provide representative descriptive data and reliability estimates, assess the reliability across the trait spectrum, and examine the nomological network of the short version of the Narcissistic Admiration and Rivalry Questionnaire (NARQ-S; Back et al., 2013). We used data from a large convenience sample (total N = 11,937) as well as data from a large representative sample (total N = 4,433) that included responses to other narcissism measures as well as related constructs, including the other Dark Triad traits, Big Five personality traits, and self-esteem. Confirmatory factor analysis and item response theory were used to validate the factor structure and estimate the reliability across the latent trait spectrum, respectively. Results suggest that the NARQ-S shows a robust factor structure and is a reliable and valid short measure of the agentic and antagonistic aspects of grandiose narcissism. We also discuss future directions and applications of the NARQ-S as a short and comprehensive measure of grandiose narcissism. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

The feeding practices and structure questionnaire: construction and initial validation in a sample of Australian first-time mothers and their 2-year olds.

Science.gov (United States)

Jansen, Elena; Mallan, Kimberley M; Nicholson, Jan M; Daniels, Lynne A

2014-06-04

Early feeding practices lay the foundation for children's eating habits and weight gain. Questionnaires are available to assess parental feeding but overlapping and inconsistent items, subscales and terminology limit conceptual clarity and between study comparisons. Our aim was to consolidate a range of existing items into a parsimonious and conceptually robust questionnaire for assessing feeding practices with very young children (review 10 factors were specified. Of these, 9 factors (40 items) showed acceptable model fit and internal reliability (Cronbach's α: 0.61-0.89). Four factors reflected non-responsive feeding practices: 'Distrust in Appetite', 'Reward for Behaviour', 'Reward for Eating', and 'Persuasive Feeding'. Five factors reflected structure of the meal environment and limits: 'Structured Meal Setting', 'Structured Meal Timing', 'Family Meal Setting', 'Overt Restriction' and 'Covert Restriction'. Feeding practices generally showed the expected pattern of associations with child eating behaviours but none with weight. The Feeding Practices and Structure Questionnaire (FPSQ) provides a new reliable and valid measure of parental feeding practices, specifically maternal responsiveness to children's hunger/satiety signals facilitated by routine and structure in feeding. Further validation in more diverse samples is required.

Importance of questionnaire context for a physical activity question

DEFF Research Database (Denmark)

Jørgensen, M. E.; Sørensen, Mette Rosenlund; Ekholm, O.

2013-01-01

; however, this has never been shown for physical activity questions. The aim was to study the influence of different formulations and question order on self-report physical activity in a population-based health interview survey. Four samples of each 1000 adults were drawn at random from the National Person......Adequate information about physical activity habits is essential for surveillance, implementing, and evaluating public health initiatives in this area. Previous studies have shown that question order and differences in wording result in systematic differences in people's responses to questionnaires...... Register. A new question about physical activity was included with minor differences in formulations in samples 1–3. Furthermore, the question in sample 2 was included in sample 4 but was placed in the end of the questionnaire. The mean time spent on moderate physical activity varied between the four...

Immunogenicity and safety of high-dose hepatitis B vaccine among drug users: A randomized, open-labeled, blank-controlled trial.

Science.gov (United States)

Feng, Yongliang; Shi, Jing; Gao, Linying; Yao, Tian; Feng, Dan; Luo, Dan; Li, Zhansheng; Zhang, Yawei; Wang, Fuzhen; Cui, Fuqiang; Li, Li; Liang, Xiaofeng; Wang, Suping

2017-06-03

Due to the low uptake, adherence, and completion of vaccination among drug users, and their compromised immune responses to hepatitis B vaccination, the current practice of hepatitis B vaccination may not provide optimal protection. The aim of this study was to evaluate the immunogenicity and safety of 60 µg and 20 µg hepatitis B vaccines among drug users. A randomized, open-labeled, blank-controlled trial was conducted among drug users at 2 drug rehabilitation centers in China. The eligible participants were drug users who were serologically negative for the hepatitis B surface antigen (HBsAg) and the hepatitis B surface antibody (anti-HBs). Participants were randomized in a ratio of 1:1:1 to receive 20 µg (IM20 group) or 60 µg (IM60 group) of hepatitis B vaccine or blank control at months 0, 1, and 6, and followed at months 6, 7, and 12. Seroconversion rates of 94.7% and 92.6% were observed in IM20 and IM60 groups at month 7, and correspondingly decreased to 89.5% and 91.7% respectively at month 12. The IM60 group showed significantly higher geometric mean concentrations (GMCs) of anti-HBs (2022.5 and 676.7 mIU mL-1) than the IM20 group did (909.6 and 470.5 mIU mL-1) at months 7 and 12 (P B vaccines showed good immunogenicity among the drug users.

A novel feedback control system – Controlling the material flow in deep drawing using distributed blank-holder force

DEFF Research Database (Denmark)

Endelt, Benny Ørtoft; Tommerup, Søren; Danckert, Joachim

2013-01-01

The performance of a feedback control system is often limited by the quality of the model on which it is based, and often the controller design is based on trial and error due to insufficient modeling capabilities. A framework is proposed where the controller design is based on classical state...... on a deep drawing operation where the objective was to control material flow throughout the part using only spatial information regarding flange draw-in. The control system controls both the magnitude and distribution of the blank-holder force. The methodology proved stable and flexible with respect...

Physical Appearance Concern Questionnaire (PACQ in Iranian Population

Directory of Open Access Journals (Sweden)

Katayoun Khademi

2011-10-01

Full Text Available Objectives: The purpose of this study is to make questionnaire for screening body dysmorphic disorder sufferers in cosmetic clinics. Methods: A sample of 150 female patients with age average 29.4 years completed Physical Appearance Concern Questionnaire. It has been used as screening tool for screening patients with body dysmorphic disorder symptoms in cosmetic clinics. Results: Result of reliability analysis (α=0.908 and validity have shown the effectiveness of this questionnaire for recognizing individuals with BDD symptoms. Discussion: Physical appearance concern questionnaire can be used in cosmetic clinics for identifying BDD sufferers among clients, with score for the severity of symptoms. Almost all of the researches have been studying in cosmetic clinics or dermatology settings and there is no investigation for people with special needs, thus further research is required in the development of a screening questionnaire or interview for identifying patients with BDD with special needs.

Replication of a Modified Factor Structure for the Eating Disorder Examination-Questionnaire: Extension to Clinical Eating Disorder and Non-clinical Samples in Portugal.

Science.gov (United States)

Machado, Paulo P P; Grilo, Carlos M; Crosby, Ross D

2018-01-01

Psychometric investigations of the Eating Disorder Examination-Questionnaire (EDE-Q) have generally not supported the original scale structure. The present study tested an alternative brief factor structure in two large Portuguese samples: (1) a non-clinical sample of N = 4117 female students and (2) a treatment-seeking sample of N = 609 patients diagnosed with eating disorders. Confirmatory factor analysis revealed a poor fit for the original EDE-Q structure in both the non-clinical and the clinical samples but revealed a good fit for the alternative 7-item 3-factor structure (dietary restraint, shape/weight overvaluation and body dissatisfaction). Factor loadings were invariant across samples and across the different specific eating disorder diagnoses in the clinical sample. These confirmatory factor analysis findings, which replicate findings from studies with diverse predominately overweight/obese samples, supported a modified 7-item, 3-factor structure for the EDE-Q. The reliable findings across different non-clinical and clinical eating disorder groups provide confidence regarding the potential utility of this brief version. Copyright © 2017 John Wiley & Sons, Ltd and Eating Disorders Association. Copyright © 2017 John Wiley & Sons, Ltd and Eating Disorders Association.

Questionnaire surveys of dentists on radiology.

Science.gov (United States)

Shelley, A M; Brunton, P; Horner, K

2012-05-01

Survey by questionnaire is a widely used research method in dental radiology. A major concern in reviews of questionnaires is non-response. The objectives of this study were to review questionnaire studies in dental radiology with regard to potential survey errors and to develop recommendations to assist future researchers. A literature search with the software search package PubMed was used to obtain internet-based access to Medline through the website www.ncbi.nlm.nih.gov/pubmed. A search of the English language peer-reviewed literature was conducted of all published studies, with no restriction on date. The search strategy found articles with dates from 1983 to 2010. The medical subject heading terms used were "questionnaire", "dental radiology" and "dental radiography". The reference sections of articles retrieved by this method were hand-searched in order to identify further relevant papers. Reviews, commentaries and relevant studies from the wider literature were also included. 53 questionnaire studies were identified in the dental literature that concerned dental radiography and included a report of response rate. These were all published between 1983 and 2010. In total, 87 articles are referred to in this review, including the 53 dental radiology studies. Other cited articles include reviews, commentaries and examples of studies outside dental radiology where they are germane to the arguments presented. Non-response is only one of four broad areas of error to which questionnaire surveys are subject. This review considers coverage, sampling and measurement, as well as non-response. Recommendations are made to assist future research that uses questionnaire surveys.

Development and validation of the Perceived Food Environment Questionnaire in a French-Canadian population.

Science.gov (United States)

Carbonneau, Elise; Robitaille, Julie; Lamarche, Benoît; Corneau, Louise; Lemieux, Simone

2017-08-01

The present study aimed to develop and validate a questionnaire assessing perceived food environment in a French-Canadian population. A questionnaire, the Perceived Food Environment Questionnaire, was developed assessing perceived accessibility to healthy (nine items) and unhealthy foods (three items). A pre-test sample was recruited for a pilot testing of the questionnaire. For the validation study, another sample was recruited and completed the questionnaire twice. Exploratory factor analysis was performed on the items to assess the number of factors (subscales). Cronbach's α was used to measure internal consistency reliability. Test-retest reliability was assessed with Pearson correlations. Online survey. Men and women from the Québec City area (n 31 in the pre-test sample; n 150 in the validation study sample). The pilot testing did not lead to any change in the questionnaire. The exploratory factor analysis revealed a two-subscale structure. The first subscale is composed of six items assessing accessibility to healthy foods and the second includes three items related to accessibility to unhealthy foods. Three items were removed from the questionnaire due to low loading on the two subscales. The subscales demonstrated adequate internal consistency (Cronbach's α=0·77 for healthy foods and 0·62 for unhealthy foods) and test-retest reliability (r=0·59 and 0·60, respectively; both PFood Environment Questionnaire was developed for a French-Canadian population and demonstrated good psychometric properties. Further validation is recommended if the questionnaire is to be used in other populations.

Psychometric Properties of the Catastrophic Cognitions Questionnaire-Modified (CCQ-Modified) Among Community Samples in Malaysia.

Science.gov (United States)

Abdul Khaiyom, Jamilah Hanum; Mukhtar, Firdaus; Ibrahim, Normala; Mohd Sidik, Sherina; Oei, Tian Po Sumantri

2016-12-01

The Catastrophic Cognitions Questionnaire-Modified (CCQ-M) is a common instrument for measuring catastrophic thoughts. In some countries, however, CCQ-M still poses concerns following the lack of appropriate validation among their populations. The current study aimed to examine the factor structure of the CCQ-M, the reliability, and the validity in community samples in Malaysia. The Malay version of CCQ-M and additional measures assessing the symptoms and cognitions relevant to anxiety disorders were completed by 682 university students and general community. Exploratory factor analysis revealed a two-factor structure accounting for 62.2% of the total variance. Confirmatory factor analysis confirmed the two-factor model by deleting four items. The Cronbach's alpha coefficients for the total and the two subscales were .94, .90, and .92, respectively. Test-retest reliability analysis was conducted on 82 university students in the interval period of 14 days, and the result was r = .58. Evidence supported the concurrent, convergent, and discriminant validity. In conclusion, the 17-item CCQ-M-Malaysia is a valid and reliable instrument for assessing catastrophic cognitions among Malaysian populations. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

Low-defect reflective mask blanks for extreme ultraviolet lithography

International Nuclear Information System (INIS)

Burkhart, S C; Cerjarn, C; Kearney, P; Mirkarimi, P; Ray-Chaudhuri, A; Walton, C.

1999-01-01

Extreme Ultraviolet Lithgraphy (EUVL) is an emerging technology for fabrication of sub-100 nm feature sizes on silicon, following the SIA road map well into the 21st century. The specific EUVL system described is a scanned, projection lithography system with a 4:1 reduction, using a laser plasma EUV source. The mask and all of the system optics are reflective, multilayer mirrors which function in the extreme ultraviolet at 13.4 nm wavelength. Since the masks are imaged to the wafer exposure plane, mask defects greater than 80% of the exposure plane CD (for 4:1 reduction) will in many cases render the mask useless, whereas intervening optics can have defects which are not a printing problem. For the 100 nm node, we must reduce defects to less than 0.01/cm ampersand sup2; at sign 80nm or larger to obtain acceptable mask production yields. We have succeeded in reducing the defects to less than 0.1/cm ampersand sup2; for defects larger than 130 nm detected by visible light inspection tools, however our program goal is to achieve 0.01/cm ampersand sup2; in the near future. More importantly though, we plan to have a detailed understanding of defect origination and the effect on multilayer growth in order to mitigate defects below the 10 -2 /cm ampersand sup2; level on the next generation of mask blank deposition systems. In this paper we will discuss issues and results from the ion-beam multilayer deposition tool, details of the defect detection and characterization facility, and progress on defect printability modeling

New Empirical Evidence on the Validity and the Reliability of the Early Life Stress Questionnaire in a Polish Sample.

Science.gov (United States)

Sokołowski, Andrzej; Dragan, Wojciech Ł

2017-01-01

Background: The Early Life Stress Questionnaire (ELSQ) is widely used to estimate the prevalence of negative events during childhood, including emotional, physical, verbal, sexual abuse, negligence, severe conflicts, separation, parental divorce, substance abuse, poverty, and so forth. Objective: This study presents the psychometric properties of the Polish adaptation of the ELSQ. It also verifies if early life stress (ELS) is a good predictor of psychopathology symptoms during adulthood. Materials and Methods: We analyzed data from two samples. Sample 1 was selected by random quota method from across the country and included 609 participants aged 18-50 years, 306 women (50.2%) and 303 men (49.8%). Sample 2 contained 503 young adults (253 women and 250 men) aged 18-25. Confirmatory and exploratory factor analyses were used to measure ELSQ internal consistency. The validity was based on the relation to psychopathological symptoms and substance misuse. Results: Results showed good internal consistency and validity. Exploratory factor analysis indicates a six-factor structure of the ELSQ. ELS was related to psychopathology in adulthood, including depressive, sociophobic, vegetative as well as pain symptoms. ELSQ score correlated also with alcohol use, but not nicotine dependence. Moreover, ELS was correlated with stress in adulthood. Conclusion: The findings indicate that the Polish version of the ELSQ is a valid and reliable instrument for assessing ELS in the Polish population and may be applied in both clinical and community samples.

A PHYSICAL ACTIVITY QUESTIONNAIRE: REPRODUCIBILITY AND VALIDITY

Directory of Open Access Journals (Sweden)

Nicolas Barbosa

2007-12-01

Full Text Available This study evaluates the Quantification de L'Activite Physique en Altitude chez les Enfants (QAPACE supervised self-administered questionnaire reproducibility and validity on the estimation of the mean daily energy expenditure (DEE on Bogotá's schoolchildren. The comprehension was assessed on 324 students, whereas the reproducibility was studied on a different random sample of 162 who were exposed twice to it. Reproducibility was assessed using both the Bland-Altman plot and the intra-class correlation coefficient (ICC. The validity was studied in a sample of 18 girls and 18 boys randomly selected, which completed the test - re-test study. The DEE derived from the questionnaire was compared with the laboratory measurement results of the peak oxygen uptake (Peak VO2 from ergo-spirometry and Leger Test. The reproducibility ICC was 0.96 (95% C.I. 0.95-0.97; by age categories 8-10, 0.94 (0.89-0. 97; 11-13, 0.98 (0.96- 0.99; 14-16, 0.95 (0.91-0.98. The ICC between mean TEE as estimated by the questionnaire and the direct and indirect Peak VO2 was 0.76 (0.66 (p<0.01; by age categories, 8-10, 11-13, and 14-16 were 0.89 (0.87, 0.76 (0.78 and 0.88 (0.80 respectively. The QAPACE questionnaire is reproducible and valid for estimating PA and showed a high correlation with the Peak VO2 uptake

ULE design considerations for a 3m class light weighted mirror blank for E-ELT M5

Science.gov (United States)

Fox, Andrew; Hobbs, Tom; Edwards, Mary; Arnold, Matthew; Sawyer, Kent

2016-07-01

It is expected that the next generation of large ground based astronomical telescopes will need large fast-steering/tip-tilt mirrors made of ultra-lightweight construction. These fast-steering mirrors are used to continuously correct for atmospheric disturbances and telescope vibrations. An example of this is the European Extremely Large Telescope (E-ELT) M5 lightweight mirror, which is part of the Tip-Tilt/Field-Stabilization Unit. The baseline design for the E-ELT M5 mirror, as presented in the E-ELT Construction Proposal, is a closed-back ULE mirror with a lightweight core using square core cells. Corning Incorporated (Corning) has a long history of manufacturing lightweight mirror blanks using ULE in a closed-back construction, going back to the 1960's, and includes the Hubble Space Telescope primary mirror, Subaru Telescope secondary and tertiary mirrors, the Magellan I and II tertiary mirrors, and Kepler Space Telescope primary mirror, among many others. A parametric study of 1-meter class lightweight mirror designs showed that Corning's capability to seal a continuous back sheet to a light-weighted core structure provides superior mirror rigidity, in a near-zero thermal expansion material, relative to other existing technologies in this design space. Corning has investigated the parametric performance of several design characteristics for a 3-meter class lightweight mirror blank for the E-ELT M5. Finite Element Analysis was performed on several design scenarios to obtain weight, areal density, and first Eigen frequency. This paper presents an overview of Corning ULE and lightweight mirror manufacturing capabilities, the parametric performance of design characteristics for 1-meter class and 3-meter class lightweight mirrors, as well as the manufacturing advantages and disadvantages of those characteristics.

Validation of the Goal Content for Exercise Questionnaire (GCEQ for a sample of elderly Portuguese people

Directory of Open Access Journals (Sweden)

Raul Antunes

2017-06-01

Full Text Available According Sebire, Standage and Vansteenkiste (2008, goals contents (motives are the major drivers of behavior, giving rise to the goal content theory, which is in the basis of Goal Content for Exercise Questionnaire (GCEQ: Sebire et al., 2008 development. So, the main goal of present study was to conduct the validation of GCEQ for a sample of Portuguese elderly (n = 311, with equal or higher ages than 60 years old (M = 68.53; DP = 6.69. The main results show us that CGEQ measurement model (5 factors, 20 items only present adequate fit to data after the elimination of 3 items: S-Bχ²=219.9, df=109, p=.001, SRMR=.049, TLI=.916, CFI=.934, RMSEA=.057, RMSEA 90% CI=.046-.068, PCFI=.747. Besides that, the 5 factors show us acceptable values of composite reliability: between .76 and .88. Those findings allow us to conclude that GCEQ with 5 factors and 17 items can be used to measure goal content in a population of elderly Portuguese people in physical activity domain.

The Effect of Small Sample Size on Measurement Equivalence of Psychometric Questionnaires in MIMIC Model: A Simulation Study

Directory of Open Access Journals (Sweden)

Jamshid Jamali

2017-01-01

Full Text Available Evaluating measurement equivalence (also known as differential item functioning (DIF is an important part of the process of validating psychometric questionnaires. This study aimed at evaluating the multiple indicators multiple causes (MIMIC model for DIF detection when latent construct distribution is nonnormal and the focal group sample size is small. In this simulation-based study, Type I error rates and power of MIMIC model for detecting uniform-DIF were investigated under different combinations of reference to focal group sample size ratio, magnitude of the uniform-DIF effect, scale length, the number of response categories, and latent trait distribution. Moderate and high skewness in the latent trait distribution led to a decrease of 0.33% and 0.47% power of MIMIC model for detecting uniform-DIF, respectively. The findings indicated that, by increasing the scale length, the number of response categories and magnitude DIF improved the power of MIMIC model, by 3.47%, 4.83%, and 20.35%, respectively; it also decreased Type I error of MIMIC approach by 2.81%, 5.66%, and 0.04%, respectively. This study revealed that power of MIMIC model was at an acceptable level when latent trait distributions were skewed. However, empirical Type I error rate was slightly greater than nominal significance level. Consequently, the MIMIC was recommended for detection of uniform-DIF when latent construct distribution is nonnormal and the focal group sample size is small.

The Effect of Small Sample Size on Measurement Equivalence of Psychometric Questionnaires in MIMIC Model: A Simulation Study.

Science.gov (United States)

Jamali, Jamshid; Ayatollahi, Seyyed Mohammad Taghi; Jafari, Peyman

2017-01-01

Evaluating measurement equivalence (also known as differential item functioning (DIF)) is an important part of the process of validating psychometric questionnaires. This study aimed at evaluating the multiple indicators multiple causes (MIMIC) model for DIF detection when latent construct distribution is nonnormal and the focal group sample size is small. In this simulation-based study, Type I error rates and power of MIMIC model for detecting uniform-DIF were investigated under different combinations of reference to focal group sample size ratio, magnitude of the uniform-DIF effect, scale length, the number of response categories, and latent trait distribution. Moderate and high skewness in the latent trait distribution led to a decrease of 0.33% and 0.47% power of MIMIC model for detecting uniform-DIF, respectively. The findings indicated that, by increasing the scale length, the number of response categories and magnitude DIF improved the power of MIMIC model, by 3.47%, 4.83%, and 20.35%, respectively; it also decreased Type I error of MIMIC approach by 2.81%, 5.66%, and 0.04%, respectively. This study revealed that power of MIMIC model was at an acceptable level when latent trait distributions were skewed. However, empirical Type I error rate was slightly greater than nominal significance level. Consequently, the MIMIC was recommended for detection of uniform-DIF when latent construct distribution is nonnormal and the focal group sample size is small.

Development and Validation of an Attributional Style Questionnaire for Adolescents

Science.gov (United States)

Rodriguez-Naranjo, Carmen; Cano, Antonio

2010-01-01

We describe the development and psychometric characteristics of a new version of the Attributional Style Questionnaire (ASQ; Seligman, Abramson, Semmell, & Von Baeyer, 1979)--a version called the Attributional Style Questionnaire for Adolescents (ASQ-A)--using 3 samples (Ns = 547, 438, and 240) of Spanish secondary school students. In Study 1,…

Tank 241-BY-105 vapor sampling and analysis tank characterization report

International Nuclear Information System (INIS)

Huckaby, J.L.

1995-01-01

Tank BY-105 headspace gas and vapor samples were collected and analyzed to help determine the potential risks to tank farm workers due to fugitive emissions from the tank. Tank BY-105 is on the Ferrocyanide Watch List. Samples were collected from Tank BY-105 using the vapor sampling system (VSS) on July 7, 1994 by WHC Sampling and Mobile Laboratories. The tank headspace temperature was determined to be 26 C. Air from the Tank BY-105 headspace was withdrawn via a heated sampling probe mounted in riser 10A, and transferred via heated tubing to the VSS sampling manifold. All heated zones of the VSS were maintained at approximately 65 C. Sampling media were prepared and analyzed by WHC, Oak Ridge National Laboratories, Pacific Northwest Laboratories, and Oregon Graduate Institute of Science and Technology through a contract with Sandia National Laboratories. The 46 tank air samples and 2 ambient air control samples collected are listed in Table X-1 by analytical laboratory. Table X-1 also lists the 10 trip blanks provided by the laboratories

Factor Structure of the Eating Disorder Examination-Questionnaire in a Clinical Sample of Adult Women With Anorexia Nervosa.

Science.gov (United States)

Phillips, Kathryn E; Jennings, Karen M; Gregas, Matthew

2018-05-01

An exploratory factor analysis on the Eating Disorder Examination-Questionnaire (EDE-Q) is presented for a clinical sample of women with anorexia nervosa. THE EDE-Q was completed by 169 participants after admission to an inpatient unit for eating disorders. Results of the current study did not support the four-factor model presented by the EDE-Q. A new four-factor solution was obtained with two factors showing similarity to the Restraint and Eating Concern subscales of the original model. The Shape and Weight Concern items primarily loaded together on one factor, along with preoccupation with food and fear of losing control over eating, two Eating Concern items. Finally, an appearance factor was obtained that supports the results of prior research. [Journal of Psychosocial Nursing and Mental Health Services, 56(5), 33-39.]. Copyright 2018, SLACK Incorporated.

Tank Vapor Sampling and Analysis Data Package for Tank 241-Z-361 Sampled 09/22/1999 and 09/27/1999, During Sludge Core Removal

International Nuclear Information System (INIS)

VISWANATH, R.S.

1999-01-01

This data package presents sampling data and analytical results from the September 22 and 27, 1999, headspace vapor sampling of Hanford Site Tank 241-2-361 during sludge core removal. The Lockheed Martin Hanford Corporation (LMHC) sampling team collected the samples and Waste Management Laboratory (WML) analyzed the samples in accordance with the requirements specified in the 241-2361 Sludge Characterization Sampling and Analysis Plan, (SAP), HNF-4371/Rev. 1, (Babcock and Wilcox Hanford Corporation, 1999). Six SUMMA(trademark) canister samples were collected on each day (1 ambient field blank and 5 tank vapor samples collected when each core segment was removed). The samples were radiologically released on September 28 and October 4, 1999, and received at the laboratory on September 29 and October 6, 1999. Target analytes were not detected at concentrations greater than their notification limits as specified in the SAP. Analytical results for the target analytes and tentatively identified compounds (TICs) are presented in Section 2.2.2 starting on page 2B-7. Three compounds identified for analysis in the SAP were analyzed as TICs. The discussion of this modification is presented in Section 2.2.1.2

Determination of sampling constants in NBS geochemical standard reference materials

International Nuclear Information System (INIS)

Filby, R.H.; Bragg, A.E.; Grimm, C.A.

1986-01-01

Recently Filby et al. showed that, for several elements, National Bureau of Standards (NBS) Fly Ash standard reference material (SRM) 1633a was a suitable reference material for microanalysis (sample weights 2 , and the mean sample weight, W vector, K/sub s/ = (S/sub s/%) 2 W vector, could not be determined from these data because it was not possible to quantitate other sources of error in the experimental variances. K/sub s/ values for certified elements in geochemical SRMs provide important homogeneity information for microanalysis. For mineralogically homogeneous SRMs (i.e., small K/sub s/ values for associated elements) such as the proposed clays, it is necessary to determine K/sub s/ by analysis of very small sample aliquots to maximize the subsampling variance relative to other sources of error. This source of error and the blank correction for the sample container can be eliminated by determining K/sub s/ from radionuclide activities of weighed subsamples of a preirradiated SRM

Developement of supervisor's bullying questionnaire at workplace

Directory of Open Access Journals (Sweden)

Mohsen Golparvar

2018-03-01

Full Text Available Bullying is one of behaviors which occur in various forms at workplaces. These types of behaviors are associated with diverse range of behaviors and other variables. Considering the lack of instrument to assess supervisor's bullying in workplaces of Iran, this research was carried out to constructing and studying reliability and validity of supervisor's bullying questionnaire at workplace. Statistical population of this research was all of Isfahan oil refinery’s staff that 402 participants was chosen as participant by simple random sampling mehod. The tools included perceived organizational justice questionnaire, organizational citizenship behaviors questionnaire and deviant behaviors questionnaire which used for studying convergent and divergent validity of researcher-made questionnaire of supervisor's bullying. Data were analyzed by using confirmatory and exploratory factor analysis, canonical correlation coefficient (for studying convergent and divergent validity and reliability coefficient (Cronbach’s alpha and test- retest reliability. Results showed that supervisor's bullying questionnaire has five factor structures which named: supervisors’ threat, insult and scorn by supervisor, anger and revengefulness of supervisor, ignorance and unconventional work pressure of supervisor, supervisors’ boring and cheap. Cronbach’s alpha for the five factors was equal to 0.87, 0.84, 0.82, 0.81, 0.81, and test-retest reliability for those five factors was equal to 0.81, 0.59, 0.58, 0.83, and 0.77. The results of this study revealed that supervisor's bullying questionnaire has suitable validity and reliability for assessment the level of supervisor's bullying at workplaces.

Developing a model for measuring fear of pain in Norwegian samples: The Fear of Pain Questionnaire Norway

DEFF Research Database (Denmark)

Vambheim, Sara M; Lyby, Peter Solvoll; Aslaksen, Per M

2017-01-01

Fear of pain is highly correlated with pain report and physiological measures of arousal when pain is inflicted. The Fear of Pain Questionnaire III (FPQ-III) and The Fear of Pain Questionnaire Short Form (FPQ-SF) are self-report inventories developed for assessment of fear of pain (FOP). A previous...

Assessing decentering: validation, psychometric properties, and clinical usefulness of the Experiences Questionnaire in a Spanish sample.

Science.gov (United States)

Soler, Joaquim; Franquesa, Alba; Feliu-Soler, Albert; Cebolla, Ausias; García-Campayo, Javier; Tejedor, Rosa; Demarzo, Marcelo; Baños, Rosa; Pascual, Juan Carlos; Portella, Maria J

2014-11-01

Decentering is defined as the ability to observe one's thoughts and feelings in a detached manner. The Experiences Questionnaire (EQ) is a self-report instrument that originally assessed decentering and rumination. The purpose of this study was to evaluate the psychometric properties of the Spanish version of EQ-Decentering and to explore its clinical usefulness. The 11-item EQ-Decentering subscale was translated into Spanish and psychometric properties were examined in a sample of 921 adult individuals, 231 with psychiatric disorders and 690 without. The subsample of nonpsychiatric participants was also split according to their previous meditative experience (meditative participants, n=341; and nonmeditative participants, n=349). Additionally, differences among these three subgroups were explored to determine clinical validity of the scale. Finally, EQ-Decentering was administered twice in a group of borderline personality disorder, before and after a 10-week mindfulness intervention. Confirmatory factor analysis indicated acceptable model fit, sbχ(2)=243.8836 (p.46; and divergent validity: r<-.35). The scale detected changes in decentering after a 10-session intervention in mindfulness (t=-4.692, p<.00001). Differences among groups were significant (F=134.8, p<.000001), where psychiatric participants showed the lowest scores compared to nonpsychiatric meditative and nonmeditative participants. The Spanish version of the EQ-Decentering is a valid and reliable instrument to assess decentering either in clinical and nonclinical samples. In addition, the findings show that EQ-Decentering seems an adequate outcome instrument to detect changes after mindfulness-based interventions. Copyright © 2014. Published by Elsevier Ltd.

Validation of the Dutch Questionnaire on Emotional Labor (D-QEL) in Nurses and Teachers

NARCIS (Netherlands)

Näring, Gérard; Briët, Mariette; Brouwers, André

2008-01-01

This paper describes the validation of the Dutch Questionnaire on Emotional Labor (D-QEL) in a sample of 365 teachers and in a sample of 334 nurses. The D-QEL is a 13 item self-report questionnaire that measures surface acting, deep acting, suppression and emotional consonance. Confirmatory factor

Enhancing sample preparation capabilities for accelerator mass spectrometry radiocarbon and radiocalcium studies

International Nuclear Information System (INIS)

Taylor, R.E.

1991-01-01

With support provided by the LLNL Accelerator Mass Spectrometry Laboratory, the UCR Radiocarbon Laboratory continued its studies involving sample pretreatment and target preparation for both AMS radiocarbon ( 14 C) and radiocalcium ( 41 Ca) involving applications to archaeologically -- and paleoanthropologically- related samples. With regard to AMS 14 C-related studies, we have extended the development of a series of procedures which have, as their initial goal, the capability to combust several hundred microgram amounts of a chemically-pretreated organic sample and convert the resultant CO 2 to graphitic carbon which will consistently yield relatively high 13 C - ion currents and blanks which will yield, on a consistent basis, 14 C count rates at or below 0.20% modern, giving an 2 sigma age limit of >50,000 yr BP

Validation of Online Versions of Tinnitus Questionnaires Translated into Swedish

Science.gov (United States)

Müller, Karolina; Edvall, Niklas K.; Idrizbegovic, Esma; Huhn, Robert; Cima, Rilana; Persson, Viktor; Leineweber, Constanze; Westerlund, Hugo; Langguth, Berthold; Schlee, Winfried; Canlon, Barbara; Cederroth, Christopher R.

2016-01-01

Background: Due to the lack of objective measures for assessing tinnitus, its clinical evaluation largely relies on the use of questionnaires and psychoacoustic tests. A global assessment of tinnitus burden would largely benefit from holistic approaches that not only incorporate measures of tinnitus but also take into account associated fears, emotional aspects (stress, anxiety, and depression), and quality of life. In Sweden, only a few instruments are available for assessing tinnitus, and the existing tools lack validation. Therefore, we translated a set of questionnaires into Swedish and evaluated their reliability and validity in a group of tinnitus subjects. Methods: We translated the English versions of the Tinnitus Functional Index (TFI), the Fear of Tinnitus Questionnaire (FTQ), the Tinnitus Catastrophizing Scale (TCS), the Perceived Stress Questionnaire (PSQ-30), and the Tinnitus Sample Case History Questionnaire (TSCHQ) into Swedish. These translations were delivered via the internet with the already existing Swedish versions of the Tinnitus Handicap Inventory (THI), the Hospital Anxiety and Depression Scale (HADS), the Hyperacusis Questionnaire (HQ), and the World Health Organization Quality of Life questionnaire (WHOQoL-BREF). Psychometric properties were evaluated by means of internal consistency [Cronbach's alpha (α)] and test–retest reliability across a 9-week interval [Intraclass Correlation Coefficient (ICC), Cohen's kappa] in order to establish construct as well as clinical validity using a sample of 260 subjects from a population-based cohort. Results: Internal consistency was acceptable for all questionnaires (α > 0.7) with the exception of the “social relationships” subscale of the WHOQoL-BREF. Test–retest reliability was generally acceptable (ICC > 0.70, Cohens kappa > 0.60) for the tinnitus-related questionnaires, except for the TFI “sense of control” subscale and 15 items of the TSCHQ. Spearmen rank correlations showed that

Validation of online versions of tinnitus questionnaires translated into Swedish

Directory of Open Access Journals (Sweden)

Karolina Müller

2016-11-01

Full Text Available BackgroundDue to the lack of objective measures for assessing tinnitus, its clinical evaluation largely relies on the use of questionnaires and psychoacoustic tests. A global assessment of tinnitus burden would largely benefit from holistic approaches that not only incorporate measures of tinnitus but also take into account associated fears, emotional aspects (stress, anxiety, and depression, and quality of life. In Sweden, only a few instruments are available for assessing tinnitus, and the existing tools lack validation. Therefore, we translated a set of questionnaires into Swedish and evaluated their reliability and validity in a group of tinnitus subjects. MethodsWe translated the English versions of the Tinnitus Functional Index (TFI, the Fear of Tinnitus Questionnaire (FTQ, the Tinnitus Catastrophizing Scale (TCS, the Perceived Stress Questionnaire (PSQ-30, and the Tinnitus Sample Case History Questionnaire (TSCHQ into Swedish. These translations were delivered via the internet with the already existing Swedish versions of the Tinnitus Handicap Inventory (THI, the Hospital Anxiety and Depression Scale (HADS, the Hyperacusis Questionnaire (HQ, and the World Health Organization Quality of Life questionnaire (WHOQoL-BREF. Psychometric properties were evaluated by means of internal consistency (Cronbach’s alpha α and test-retest reliability across a 9-week interval (Intraclass Correlation Coefficient ICC, Cohen’s kappa in order to establish construct as well as clinical validity using a sample of 260 subjects from a population-based cohort.ResultsInternal consistency was acceptable for all questionnaires (α >0.7 with the exception of the ‘social relationships’ subscale of the WHOQoL-BREF. Test-retest reliability was generally acceptable (ICC >.70, Cohens Kappa >.60 for the tinnitus-related questionnaires, except for the TFI ‘sense of control’ subscale and 15 items of the TSCHQ. Spearmen rank correlations showed that almost all

Computer simulation of quenching uranium-0.75% titanium penetrator blanks. Final report for FY 1984

International Nuclear Information System (INIS)

Llewellyn, G.H.; Aramayo, G.A.; Childs, K.W.; Ludtka, G.M.; Siman-Tov, M.

1985-02-01

The models developed can be used as a basis to understand, study, and optimize the process. Information obtained from these models can be used to analytically predict temperature distribution, cooling rates, stresses, deformation, phase composition, and possibly the prediction of void formations, all as functions of both position and time. It was demonstrated that nonsymmetrical boundary conditions can lead to bowing of the penetrator blanks and applicable techniques were developed to optimize the quenching process. Experiments for deriving physical and mechanical properties for the uranium-0.75% Ti alloy including data on the heats of transformation have been performed. It is concluded that the contribution of the transformation heat constitutes about 19% of the total heat transfer involved and is, therefore, a significant factor affecting the metallurgical behavior of the alloy during the quenching operation. This behavior is less sensitive to the dependence of the property data on temperature

The Arabic Mood and Feelings Questionnaire: psychometrics and validity in a clinical sample.

Science.gov (United States)

Tavitian, Lucy; Atwi, Mia; Bawab, Soha; Hariz, Nayla; Zeinoun, Pia; Khani, Munir; Maalouf, Fadi T

2014-06-01

The purpose of this study was to provide clinicians in the Arab World with a child and adolescent depression screening tool. Child and parent versions of the Mood and Feelings Questionnaire (CMFQ and PMFQ respectively) were translated to Arabic and administered along with the Strengths and Difficulties Questionnaire (SDQ) to 30 children and adolescents and with mood disorders and 76 children and adolescents with other psychiatric disorders seeking treatment at a child and adolescent psychiatry clinic. DSM-IV diagnoses were generated through clinical interviews by a psychiatrist blinded to self-reports. Internal consistency for both versions was excellent with moderate inter-informant agreement and good convergent validity with the SDQ emotional symptoms subscales on the child and parent forms. The CMFQ and PMFQ significantly differentiated between currently depressed participants and those with other psychiatric disorders. CMFQ scores were a stronger predictor of categorization into depressed and non-depressed groups than the PMFQ. Two modes of cutoffs were calculated with one favoring sensitivity (a score of 26 for the CMFQ and 22 for the PMFQ) and another favoring specificity (a score of 31 for the CMFQ and 28 for the PMFQ).

Advanced defect classification by smart sampling, based on sub-wavelength anisotropic scatterometry

Science.gov (United States)

van der Walle, Peter; Kramer, Esther; Ebeling, Rob; Spruit, Helma; Alkemade, Paul; Pereira, Silvania; van der Donck, Jacques; Maas, Diederik

2018-03-01

We report on advanced defect classification using TNO's RapidNano particle scanner. RapidNano was originally designed for defect detection on blank substrates. In detection-mode, the RapidNano signal from nine azimuth angles is added for sensitivity. In review-mode signals from individual angles are analyzed to derive additional defect properties. We define the Fourier coefficient parameter space that is useful to study the statistical variation in defect types on a sample. By selecting defects from each defect type for further review by SEM, information on all defects can be obtained efficiently.

Freiburg Questionnaire of linguistic pragmatics (FQLP): psychometric properties based on a psychiatric sample

OpenAIRE

Riedel, Andreas; Suh, Heejung; Haser, Verena; Hermann, Ismene; Ebert, Dieter; Riemann, Dieter; Bubl, Emanuel; Tebartz van Elst, Ludger; H?lzel, Lars P

2014-01-01

Background Asperger?s Syndrome (AS) is an autism spectrum disorder that is characterized by significant difficulties in social interaction and nonverbal communication, and restricted and repetitive patterns of behavior and interests. Difficulties with respect to pragmatic speech, reading emotional and social cues, differentiating between fact and fiction, and taking into account the influence of context on a statement are commonly described features. However, hitherto established questionnair...

Validation of the Dutch Eating Behavior Questionnaire (DEBQ) in a sample of Spanish women.

NARCIS (Netherlands)

Cebolla, A.; Barrada, J.R.; van Strien, T.; Oliver, E.; Banos, R.M.

2014-01-01

The Dutch Eating Behavior Questionnaire (DEBQ) was developed to measure eating styles that may contribute to or attenuate the development of overweight. It comprises three scales that measure emotional, external and restrained eating. The main goal of this study is to evaluate the internal structure

Validation of the Dutch Eating Behavior Questionnaire (DEBQ) in a sample of Spanish women

NARCIS (Netherlands)

Cebolla, A.; Barrada, J.R.; Strien, T. van; Oliver, E.; Baños, R.M.

2014-01-01

The Dutch Eating Behavior Questionnaire (DEBQ) was developed to measure eating styles that may contribute to or attenuate the development of overweight. It comprises three scales that measure emotional, external and restrained eating. The main goal of this study is to evaluate the internal structure

Electrospun Blank Nanocoating for Improved Sustained Release Profiles from Medicated Gliadin Nanofibers

Directory of Open Access Journals (Sweden)

Xinkuan Liu

2018-03-01

Full Text Available Nanomaterials providing sustained release profiles are highly desired for efficacious drug delivery. Advanced nanotechnologies are useful tools for creating elaborate nanostructure-based nanomaterials to achieve the designed functional performances. In this research, a modified coaxial electrospinning was explored to fabricate a novel core-sheath nanostructure (nanofibers F2, in which a sheath drug-free gliadin layer was successfully coated on the core ketoprofen (KET-gliadin nanocomposite. A monolithic nanocomposite (nanofibers F1 that was generated through traditional blending electrospinning of core fluid was utilized as a control. Scanning electron microscopy demonstrated that both nanofibers F1 and F2 were linear. Transmission electron microscopy verified that nanofibers F2 featured a clear core-sheath nanostructure with a thin sheath layer about 25 nm, whereas their cores and nanofibers F1 were homogeneous KET-gliadin nanocomposites. X-ray diffraction patterns verified that, as a result of fine compatibility, KET was dispersed in gliadin in an amorphous state. In vitro dissolution tests demonstrated that the thin blank nanocoating in nanofibers F2 significantly modified drug release kinetics from a traditional exponential equation of nanofibers F1 to a zero-order controlled release model, linearly freeing 95.7 ± 4.7% of the loaded cargoes over a time period of 16 h.

Electrospun Blank Nanocoating for Improved Sustained Release Profiles from Medicated Gliadin Nanofibers.

Science.gov (United States)

Liu, Xinkuan; Shao, Wenyi; Luo, Mingyi; Bian, Jiayin; Yu, Deng-Guang

2018-03-22

Nanomaterials providing sustained release profiles are highly desired for efficacious drug delivery. Advanced nanotechnologies are useful tools for creating elaborate nanostructure-based nanomaterials to achieve the designed functional performances. In this research, a modified coaxial electrospinning was explored to fabricate a novel core-sheath nanostructure (nanofibers F2), in which a sheath drug-free gliadin layer was successfully coated on the core ketoprofen (KET)-gliadin nanocomposite. A monolithic nanocomposite (nanofibers F1) that was generated through traditional blending electrospinning of core fluid was utilized as a control. Scanning electron microscopy demonstrated that both nanofibers F1 and F2 were linear. Transmission electron microscopy verified that nanofibers F2 featured a clear core-sheath nanostructure with a thin sheath layer about 25 nm, whereas their cores and nanofibers F1 were homogeneous KET-gliadin nanocomposites. X-ray diffraction patterns verified that, as a result of fine compatibility, KET was dispersed in gliadin in an amorphous state. In vitro dissolution tests demonstrated that the thin blank nanocoating in nanofibers F2 significantly modified drug release kinetics from a traditional exponential equation of nanofibers F1 to a zero-order controlled release model, linearly freeing 95.7 ± 4.7% of the loaded cargoes over a time period of 16 h.

The feeding practices and structure questionnaire: construction and initial validation in a sample of Australian first-time mothers and their 2-year olds

Science.gov (United States)

2014-01-01

Background Early feeding practices lay the foundation for children’s eating habits and weight gain. Questionnaires are available to assess parental feeding but overlapping and inconsistent items, subscales and terminology limit conceptual clarity and between study comparisons. Our aim was to consolidate a range of existing items into a parsimonious and conceptually robust questionnaire for assessing feeding practices with very young children (years). Methods Data were from 462 mothers and children (age 21–27 months) from the NOURISH trial. Items from five questionnaires and two study-specific items were submitted to a priori item selection, allocation and verification, before theoretically-derived factors were tested using Confirmatory Factor Analysis. Construct validity of the new factors was examined by correlating these with child eating behaviours and weight. Results Following expert review 10 factors were specified. Of these, 9 factors (40 items) showed acceptable model fit and internal reliability (Cronbach’s α: 0.61-0.89). Four factors reflected non-responsive feeding practices: ‘Distrust in Appetite’, ‘Reward for Behaviour’, ‘Reward for Eating’, and ‘Persuasive Feeding’. Five factors reflected structure of the meal environment and limits: ‘Structured Meal Setting’, ‘Structured Meal Timing’, ‘Family Meal Setting’, ‘Overt Restriction’ and ‘Covert Restriction’. Feeding practices generally showed the expected pattern of associations with child eating behaviours but none with weight. Conclusion The Feeding Practices and Structure Questionnaire (FPSQ) provides a new reliable and valid measure of parental feeding practices, specifically maternal responsiveness to children’s hunger/satiety signals facilitated by routine and structure in feeding. Further validation in more diverse samples is required. PMID:24898364

Selective Mutism Questionnaire: Measurement Structure and Validity

Science.gov (United States)

Letamendi, Andrea M.; Chavira, Denise A.; Hitchcock, Carla A.; Roesch, Scott C.; Shipon-Blum, Elisa; Stein, Murray B.

2008-01-01

The psychometric properties of the Selective Mutism Questionnaire (SMQ) are evaluated using a clinical sample of children with selective mutism (SM). The study shows that SMQ is useful in determining the severity of a child's nonspeaking behaviors, the scope of these behaviors and necessary follow up assessment.

Elaboration, validation and standardization of the five to fifteen (FTF) questionnaire in a Danish population sample.

Science.gov (United States)

Lambek, Rikke; Trillingsgaard, Anegen

2015-03-01

The five to fifteen (FTF) is a parent questionnaire developed to assess ADHD, its common comorbid conditions and associated problems in children and adolescents. The present study examined (1) the psychometric properties of scores on the new teacher version of the FTF, (2) competing models of the FTF subdomain structure and (3) the psychometric properties and utility of scores on the newly developed FTF impact questions. Parents (n=4258) and teachers (n=1298) of Danish children and adolescents (ages 5 to 17 years), selected using simple random sampling, completed the FTF. In the largest study of the FTF to date, parent and teacher scores had acceptable psychometric properties. The FTF subdomains were organized into six domains labelled cognitive skills, motor/perception, emotion/socialization/behaviour, attention, literacy skills and activity control and analysis of these domains may provide additional information when applying the FTF in the future. The impact questions yielded information above and beyond that provided by symptom count alone and appeared to increase the ability of the FTF to identify at risk children and adolescents. Copyright © 2014 Elsevier Ltd. All rights reserved.

The Combustion Experiment on the Sample Analysis at Mars (SAM) Instrument Suite on the Curiosity Rover

Science.gov (United States)

Stern, J. C.; Malespin, C. A.; Eigenbrode, J. L.; Graham, H. V.; Archer, P. D., Jr.; Brunner, A. E.; Freissinet, C.; Franz, H. B.; Fuentes, J.; Glavin, D. P.;

14CO2 analysis of soil gas: Evaluation of sample size limits and sampling devices

Science.gov (United States)

Wotte, Anja; Wischhöfer, Philipp; Wacker, Lukas; Rethemeyer, Janet

2017-12-01

Radiocarbon (14C) analysis of CO2 respired from soils or sediments is a valuable tool to identify different carbon sources. The collection and processing of the CO2, however, is challenging and prone to contamination. We thus continuously improve our handling procedures and present a refined method for the collection of even small amounts of CO2 in molecular sieve cartridges (MSCs) for accelerator mass spectrometry 14C analysis. Using a modified vacuum rig and an improved desorption procedure, we were able to increase the CO2 recovery from the MSC (95%) as well as the sample throughput compared to our previous study. By processing series of different sample size, we show that our MSCs can be used for CO2 samples of as small as 50 μg C. The contamination by exogenous carbon determined in these laboratory tests, was less than 2.0 μg C from fossil and less than 3.0 μg C from modern sources. Additionally, we tested two sampling devices for the collection of CO2 samples released from soils or sediments, including a respiration chamber and a depth sampler, which are connected to the MSC. We obtained a very promising, low process blank for the entire CO2 sampling and purification procedure of ∼0.004 F14C (equal to 44,000 yrs BP) and ∼0.003 F14C (equal to 47,000 yrs BP). In contrast to previous studies, we observed no isotopic fractionation towards lighter δ13C values during the passive sampling with the depth samplers.

Psychometric properties of the Brazilian version of the Personal Experience Screening Questionnaire.

Science.gov (United States)

Fidalgo, Thiago Marques; Silveira, Evelyn Doering da; Winters, Ken C; Silveira, Dartiu Xavier da

2016-11-01

The Personal Experience Screening Questionnaire (PESQ) is an instrument devised for assessing the magnitude of drug misuse among adolescents. However, its psychometric properties have not been evaluated in adolescent samples outside the United States. To assess the internal reliability and validity of the Brazilian version of the PESQ. A cross-sectional study was carried out with 84 adolescents from a clinical sample and a community-based sample. All of them answered the PESQ. Among adolescents from the community, the PESQ problem severity index, which can vary from 18 to 72, was 26.48±9.28, whereas the clinical sample scored 42.89±10.02 (pPersonal Experience Questionnaire was found.

Fear of disease progression questionnaire for parents: Psychometric properties based on a sample of caregivers of children and adolescents with cystic fibrosis.

Science.gov (United States)

Fidika, Astrid; Herle, Marion; Herschbach, Peter; Goldbeck, Lutz

2015-07-01

Parents caring for a child with a chronic somatic condition are at risk of increased distress and impaired quality of life. Fear of disease progression (FoP) is known to be an important source of distress in patients and their partners, and may be of relevance for parents as well. Existing measures are not applicable to parents. This study describes the adaptation of the FoP questionnaire for parental caregivers and investigated its psychometric properties. Sixteen items appropriate for parents were derived from existing measures and from interviews with clinical experts in family-oriented psychosocial care. Factor structure, internal consistency, validity and sensitivity to change were analyzed in a clinical sample of 162 caregivers (M(age)=42.07 years, SD=6.0 years, 87.8% female) of a child with cystic fibrosis. The exploratory factor analysis reveal ed a two-factor structure, which was not supported by confirmatory analysis. Cronbach's α was examined for total score (.91) and significant positive correlations of the total score with anxiety (HADS: r=.70) and depression (CES-D: r=.60, BDI-II: r=.59), and a significant negative correlations with quality of life (r=-.66) could be demonstrated. A significant decrease in FoP was found (d=1.11) in a group of highly distressed caregivers undergoing web-based cognitive behavioral intervention. The FoP questionnaire is a reliable and valid instrument for parents of children with CF. Further studies in larger samples are needed to clarify dimensionality and validity among parents of children with other chronic conditions. Copyright © 2015 Elsevier Inc. All rights reserved.

Development and validation of the Iranian Social Health Questionnaire (IrSHQ

Directory of Open Access Journals (Sweden)

Hassan Rafiey

2017-03-01

Full Text Available Background: Social health is a fundamental dimension of health, and plays an important role in promoting social well-being. Research in social health needs reliable and valid tools, which should be also applicable to any type of social context. This study was aimed to develop an effective social health questionnaire for the social context of Iranian society. Methods: The study was conducted in three phases: 1 A preliminary 43-item questionnaire was created based on an extensive literature review; 2 The questionnaire was validated. Firstly, social health experts evaluated content validity; secondly, an exploratory factor analysis and Cronbach’s coefficient test were used; 3 The questionnaire was tested in a representative sample of 500 persons, who were selected through a multistage sampling in Tehran, Iran, in 2015. All analyses were carried out using SPSS software (version 22. Results: We developed the Iranian Social Health Questionnaire (IrSHQ consisting of a 29-item questionnaire organized in seven subscales – ‘Social interaction’, ‘social responsibility’, ‘conscientiousness’, ‘attitude to society’, ‘empathy’, ‘family relationship’, and ‘social participation’−. Internal consistency using Cronbach’s alpha coefficient was 0.86. Validity and reliability of our questionnaire were confirmed. Conclusion: Due to the size and diversity of participants, validity of results, compliance with Iranian culture, and its relative shortness, the IrSHQ appears to be a very useful instrument for measuring individual’s social health in the Iranian social context.

Reference values for the CAVIPRES-30 questionnaire, a global questionnaire on the health-related quality of life of patients with prostate cancer.

Science.gov (United States)

Gómez-Veiga, F; Silmi-Moyano, A; Günthner, S; Puyol-Pallas, M; Cózar-Olmo, J M

2014-06-01

Define and establish the reference values of the CAVIPRES-30 Questionnaire, a health related quality of life questionnaire specific for prostate cancer patients. The CAVIPRES-30 was administered to 2,630 males with prostate cancer included by 238 Urologist belonging to the Spanish National Healthcare System. Descriptive analysis on socio-demographic and clinical data were performed, and multivariate analyses were used to corroborate that stratification variables were statistically significantly and independently associated to the overall score of the questionnaire. The variables Time since diagnosis of the illness, whether the patient had a Stable partner or not, if he was, or not, undergoing Symptomatic treatment were statistically significantly and independently associated (P < .001) to the overall score of the questionnaire. The reference values table of the CAVIPRES-30 questionnaire is made up of different kinds of information of each patient profile: sample size, descriptive statistics with regard to the overall score, Cronbach's alpha value (between .791 and .875) and the questionnaire's values are reported by deciles. The results of this study contribute new proof as to the suitability and usefulness of the CAVIPRES-30 questionnaire as an instrument for assessing individually the quality of life of prostate cancer. Copyright © 2013 AEU. Published by Elsevier Espana. All rights reserved.

Aesthetic dermatology and emotional well-being questionnaire.

Science.gov (United States)

Martínez-González, M Covadonga; Martínez-González, Raquel-Amaya; Guerra-Tapia, Aurora

2014-12-01

In recent years, there has been a great development of esthetic dermatology as a subspecialty of dermatology. It is important to know to which extent the general population regard this branch of medical surgical specialty as being of interest and contributing to emotional well-being. To analyze the technical features of a questionnaire which has been designed to reflect such perception of the general population about esthetic dermatology and its contribution to emotional well-being. Production and psychometric analysis of a self-filled in questionnaire in relation to esthetic dermatology and emotional well-being (DEBIE). This questionnaire is made of 57 items and has been applied to a sample of 770 people within the general population. The drawing-up process of the questionnaire is described to provide content validity. Items analysis was carried out together with exploratory and confirmatory factor analysis to assess the structure and construct validity of the tool. The extent of internal consistency (reliability) and concurrent validity has also been verified. DEBIE questionnaire (Spanish acronym for Aesthetic Dermatology and Emotional Well-being) revolves around six factors explaining 53.91% of the variance; there is a high level of internal consistency (Cronbach's α 0.90) and reasonable criterion validity. DEBIE questionnaire brings together adequate psychometric properties that can be applied to assess the perception that the general population have in relation to esthetic dermatology and its contribution to their emotional well-being. © 2014 Wiley Periodicals, Inc.

Quantification of physical activity using the QAPACE Questionnaire: a two stage cluster sample design survey of children and adolescents attending urban school.

Science.gov (United States)

Barbosa, Nicolas; Sanchez, Carlos E; Patino, Efrain; Lozano, Benigno; Thalabard, Jean C; LE Bozec, Serge; Rieu, Michel

2016-05-01

Quantification of physical activity as energy expenditure is important since youth for the prevention of chronic non communicable diseases in adulthood. It is necessary to quantify physical activity expressed in daily energy expenditure (DEE) in school children and adolescents between 8-16 years, by age, gender and socioeconomic level (SEL) in Bogotá. This is a Two Stage Cluster Survey Sample. From a universe of 4700 schools and 760000 students from three existing socioeconomic levels in Bogotá (low, medium and high). The random sample was 20 schools and 1840 students (904 boys and 936 girls). Foreshadowing desertion of participants and inconsistency in the questionnaire responses, the sample size was increased. Thus, 6 individuals of each gender for each of the nine age groups were selected, resulting in a total sample of 2160 individuals. Selected students filled the QAPACE questionnaire under supervision. The data was analyzed comparing means with multivariate general linear model. Fixed factors used were: gender (boys and girls), age (8 to 16 years old) and tri-strata SEL (low, medium and high); as independent variables were assessed: height, weight, leisure time, expressed in hours/day and dependent variable: daily energy expenditure DEE (kJ.kg-1.day-1): during leisure time (DEE-LT), during school time (DEE-ST), during vacation time (DEE-VT), and total mean DEE per year (DEEm-TY) RESULTS: Differences in DEE by gender, in boys, LT and all DEE, with the SEL all variables were significant; but age-SEL was only significant in DEE-VT. In girls, with the SEL all variables were significant. The post hoc multiple comparisons tests were significant with age using Fisher's Least Significant Difference (LSD) test in all variables. For both genders and for all SELs the values in girls had the higher value except SEL high (5-6) The boys have higher values in DEE-LT, DEE-ST, DEE-VT; except in DEEm-TY in SEL (5-6) In SEL (5-6) all DEEs for both genders are highest. For SEL

Systematic review of the use of online questionnaires of older adults.

Science.gov (United States)

Remillard, Meegan L; Mazor, Kathleen M; Cutrona, Sarah L; Gurwitz, Jerry H; Tjia, Jennifer

2014-04-01

To describe methodological approaches to population targeting and sampling and to summarize limitations of Internet-based questionnaires in older adults. Systematic literature review. Studies using online questionnaires in older adult populations. English-language articles using search terms for geriatric, age 65 and over, Internet survey, online survey, Internet questionnaire, and online questionnaire in PubMed and EBSCO host between 1984 and July 2012. Inclusion criteria were study population mean age 65 and older and use of an online questionnaire for research. Review of 336 abstracts yielded 14 articles for full review by two investigators; 11 articles met inclusion criteria. Articles were extracted for study design and setting, participant characteristics, recruitment strategy, country, and study limitations. Eleven articles were published after 2001. Studies had populations with a mean age of 65 to 78, included descriptive and analytical designs, and were conducted in the United States, Australia, and Japan. Recruiting methods varied widely from paper fliers and personal e-mails to use of consumer marketing panels. Investigator-reported study limitations included the use of small convenience samples and limited generalizability. Online questionnaires are a feasible method of surveying older adults in some geographic regions and for some subsets of older adults, but limited Internet access constrains recruiting methods and often limits study generalizability. © 2014, Copyright the Authors Journal compilation © 2014, The American Geriatrics Society.

A spectral blanking-out controller for demonstration of information barrier technology

International Nuclear Information System (INIS)

Liu Suping; Gong Jian; Hu Guangchun; Zhang Jianhua

2006-01-01

Information barrier technology has become more and more important in the R and D of radiation fingerprint verification associated with classified items such as nuclear warheads, nuclear components and military-used nuclear materials. The function of information barriers is two-fold: one is to prevent the classified information from leaking out; the other is to provide creditable verification. To fulfill these two functions, the information barriers for a viable verification system (including all its hardware and software) must be designed on the basic principles of protecting classified information and the ability to authenticate. The Spectral Blanking-out Controller (SBC) is developed to illustrate the two functions of the information barriers and to explore some practice measures to meet the required design fundamentals. This paper briefs the task assigned to the SBC, the specific design concerns and the practical information barrier measures. The R and D of the SBC embodies the concepts of information barrier technology and has to conform to the basic guidelines: If a verification system is expected to possess strict information barriers, the design of the system must be integrative with due considerations given to the factors such as the efficiency of the verification technique, the possible measures to protect the classified information from directly or indirectly leaking out, the complete openness in all aspects of the system for the inspectors to authenticate the system for the sake of achieving certain degree of confidence on the verification results. (authors)

A Taiwanese food frequency questionnaire correlates with plasma docosahexaenoic acid but not with plasma eicosapentaenoic acid levels: questionnaires and plasma biomarkers.

Science.gov (United States)

Chien, Kuo-Liong; Lee, Meei-Shyuan; Tsai, Yi-Tsen; Chen, Pey-Rong; Lin, Hung-Ju; Hsu, Hsiu-Ching; Lee, Yuan-The; Chen, Ming-Fong

2013-02-16

Little evidence is available for the validity of dietary fish and polyunsaturated fatty acid intake derived from interviewer-administered questionnaires and plasma docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA) concentration. We estimated the correlation of DHA and EPA intake from both questionnaires and biochemical measurements. Ethnic Chinese adults with a mean (± SD) age of 59.8 (±12.8) years (n = 297) (47% women) who completed a 38-item semi-quantitative food-frequency questionnaire and provided a plasma sample were enrolled. Plasma fatty acids were analyzed by capillary gas chromatography. The Spearmen rank correlation coefficients between the intake of various types of fish and marine n-3 fatty acids as well as plasma DHA were significant, ranging from 0.20 to 0.33 (P food frequency questionnaire, were correlated with the percentages of these fatty acids in plasma, and in particular with plasma DHA. Plasma DHA levels were correlated to dietary intake of long-chain n-3 fatty acids.

Confirmatory factor analysis of the Spanish version of the Gamblers' Beliefs Questionnaire in a sample of Argentinean gamblers

Directory of Open Access Journals (Sweden)

Angelina Pilatti

2016-12-01

Full Text Available Introduction: Cognitive distortions are related to gambling frequency and gambling severity. Having a culturally sensitive measure to assess cognitive distortions will facilitate the early detection of people who might be at risk of developing problematic gambling behaviors. The Gamblers' Beliefs Questionnaire was translated into Spanish (GBQ-S but no previous study explored the structure of the GBQ-S in a non-US sample with different levels of gambling involvement. Aim: The present study examined the factor structure of the GBQ-S in a community sample of gamblers from Argentina. It also analyzed the association between cognitive distortions and type of gambling activity and frequency of gambling behaviors and the predictive utility of the GBQ-S on gambling severity. Participants: 508 youth and adults completed the GBQ-S. Results: The CFA showed an overall acceptable fit to the data confirming the proposed two-factor model. Scores of the two GBQ sub-scales were positively and significantly correlated with scores on gambling severity. Cognitive distortions have a significant effect on gambling severity after controlling for frequency of engagement in gambling activities. Luck and perseverance, but not illusion of control, was positively related to gambling severity. Discussion: scores measured by the GBQ-S exhibit adequate psychometric properties for the accurate assessment of cognitive distortions across adults and youth from the general community of Argentina.

Evaluation of the Psychometric Properties of the Mental Vulnerability Questionnaire in Undergraduate Students.

Science.gov (United States)

Sequeira, Carlos Alberto da Cruz; Barbosa, Elsa Natalina Mendes; Nogueira, Maria José Carvalho; Sampaio, Francisco Miguel Correia

2017-10-01

Translate, adapt the language, and assess the psychometric properties of the Mental Vulnerability Questionnaire (MVQ) in a Portuguese population sample of young adults. A psychometric validation study was performed. The sample comprised 166 undergraduate students. Factor analysis was applied to extract three indicators. The MVQ showed divergent validity with the Positive Mental Health Questionnaire (p Mental Health Inventory including five items (p mental vulnerability. © 2016 Wiley Periodicals, Inc.

Can we still dream when the mind is blank? Sleep and dream mentations in auto-activation deficit.

Science.gov (United States)

Leu-Semenescu, Smaranda; Uguccioni, Ginevra; Golmard, Jean-Louis; Czernecki, Virginie; Yelnik, Jerome; Dubois, Bruno; Forgeot d'Arc, Baudouin; Grabli, David; Levy, Richard; Arnulf, Isabelle

2013-10-01

Bilateral damage to the basal ganglia causes auto-activation deficit, a neuropsychological syndrome characterized by striking apathy, with a loss of self-driven behaviour that is partially reversible with external stimulation. Some patients with auto-activation deficit also experience a mental emptiness, which is defined as an absence of any self-reported thoughts. We asked whether this deficit in spontaneous activation of mental processing may be reversed during REM sleep, when dreaming activity is potentially elicited by bottom-up brainstem stimulation on the cortex. Sleep and video monitoring over two nights and cognitive tests were performed on 13 patients with auto-activation deficit secondary to bilateral striato-pallidal lesions and 13 healthy subjects. Dream mentations were collected from home diaries and after forced awakenings in non-REM and REM sleep. The home diaries were blindly analysed for length, complexity and bizarreness. A mental blank during wakefulness was complete in six patients and partial in one patient. Four (31%) patients with auto-activation deficit (versus 92% of control subjects) reported mentations when awakened from REM sleep, even when they demonstrated a mental blank during the daytime (n = 2). However, the patients' dream reports were infrequent, short, devoid of any bizarre or emotional elements and tended to be less complex than the dream mentations of control subjects. The sleep duration, continuity and stages were similar between the groups, except for a striking absence of sleep spindles in 6 of 13 patients with auto-activation deficit, despite an intact thalamus. The presence of spontaneous dreams in REM sleep in the absence of thoughts during wakefulness in patients with auto-activation deficit supports the idea that simple dream imagery is generated by brainstem stimulation and is sent to the sensory cortex. However, the lack of complexity in these dream mentations suggests that the full dreaming process (scenario

Paper to Electronic Questionnaires: Effects on Structured Questionnaire Forms

Science.gov (United States)

Trujillo, Anna C.

2009-01-01

With the use of computers, paper questionnaires are being replaced by electronic questionnaires. The formats of traditional paper questionnaires have been found to effect a subject's rating. Consequently, the transition from paper to electronic format can subtly change results. The research presented begins to determine how electronic questionnaire formats change subjective ratings. For formats where subjects used a flow chart to arrive at their rating, starting at the worst and middle ratings of the flow charts were the most accurate but subjects took slightly more time to arrive at their answers. Except for the electronic paper format, starting at the worst rating was the most preferred. The paper and electronic paper versions had the worst accuracy. Therefore, for flowchart type of questionnaires, flowcharts should start at the worst rating and work their way up to better ratings.

Differences between Internet samples and conventional samples of men who have sex with men: implications for research and HIV interventions.

Science.gov (United States)

Ross, M W; Tikkanen, R; Månsson, S A

2000-09-01

The Internet is becoming a new erotic oasis for obtaining sex online or in person. We reviewed the literature on cybersex and compared differences in data from samples of homosexually active men obtained on identical questionnaires from a conventional written questionnaire, distributed through the mailing and contact lists of a large national gay organization in Sweden, and through the same organization's website and chat room. A total of 716 written questionnaires and 678 Internet questionnaires were obtained. The Internet sample was younger, more likely to live in small towns or cities, live with parents or a girlfriend, and have lower formal education. They are less likely to have previous sexual experience solely with other men (one in three of the Internet sample vs. 1 in 14 of the written sample defined themselves as bisexual) and more likely to visit erotic oases such as bathhouses, video clubs and erotic movie houses. They also visited Internet chat rooms more frequently (86% of the Internet sample vs. 50% of the written sample). One third of the Internet sample wanted the opportunity to talk with an expert about HIV compared with a quarter of the written sample. Sexual practices between the two samples were generally similar, although the Internet sample reported significantly less body contact, kissing, hugging, mutual masturbation, and more condom use for anal intercourse with steady partners. Over four times as many of the Internet samples reported sex with women in the past year as the written sample. These data indicate that Internet data collection is feasible and that this mode of data collection, despite the nonrandom and self-selected nature of both types of samples, is likely to be more significantly oriented toward the young, geographically more isolated, and more behaviorally and self-identified bisexual respondent than conventionally distributed written questionnaires.

Dimensional Structure and Measurement Invariance of the Schizotypal Personality Questionnaire - Brief Revised (SPQ-BR) Scores Across American and Spanish Samples.

Science.gov (United States)

Fonseca-Pedrero, Eduardo; Cohen, Alex; Ortuño-Sierra, Javier; de Álbeniz, Alicia Pérez; Muñiz, José

2017-08-01

The main goal of the present study was to test the measurement equivalence of the Schizotypal Personality Questionnaire - Brief Revised (SPQ-BR) scores in a large sample of Spanish and American non-clinical young adults. The sample was made up of 5,625 young adults (M = 19.65 years; SD = 2.53; 38.5% males). Study of the internal structure, using confirmatory factor analysis (CFA), revealed that SPQ-BR items were grouped in a theoretical internal structure of nine first-order factors. Moreover, three or four second-order factor and bifactor models showed adequate goodness-of-fit indices. Multigroup CFA showed that the nine lower-order factor models of the SPQ-BR had configural and weak measurement invariance and partial strong measurement invariance across country. The reliability of the SPQ-BR scores, estimated with omega, ranged from 0.67 to 0.91. Using the item response theory framework, the SPQ-BR provides more accurate information at the medium and high end of the latent trait. Statistically significant differences were found in the raw scores of the SPQ-BR subscales and dimensions across samples. The American group scored higher than the Spanish group in all SPQ-BR domains except Ideas of Reference and Suspiciousness. The finding of comparable factor structure in cross-cultural samples would lend further support to the continuum model of psychosis spectrum disorders. In addition, these results provide new information about the factor structure of schizotypal traits and support the validity and utility of this measure in cross-cultural research.

Site-specific waste management instruction for the field sampling organization

International Nuclear Information System (INIS)

Bryant, D.L.

1997-01-01

The Site-Specific Waste Management Instruction (SSWMI) provides guidance for the management of waste generated from field-sampling activities performed by the Environment Restoration Contractor (ERC) Sampling Organization that are not managed as part of a project SSWMI. Generally, the waste is unused preserved groundwater trip blanks, used and expired calibration solutions, and other similar waste that cannot be returned to an ERC project for disposal. The specific waste streams addressed by this SSWMI are identified in Section 2.0. This SSWMI was prepared in accordance with BHI-EE-02, Environmental Requirements. Waste generated from field sample collection activities should be returned to the project and managed in accordance with the applicable project-specific SSWMI whenever possible. However, returning all field sample collection and associated waste to a project for disposal may not always be practical or cost effective. Therefore, the ERC field sampling organization must manage and arrange to dispose of the waste using the (Bechtel Hanford, Inc. [BHI]) Field Support Waste Management (FSWM) services. This SSWMI addresses those waste streams that are the responsibility of the field sampling organization to manage and make arrangements for disposal

[Humor at Work Questionnaire - Polish adaptation of Humor Climate Questionnaire (HCQ)].

Science.gov (United States)

Stańczak, Aleksander; Drabek, Marcin

2018-03-09

The aim of the paper is to present the Polish adaptation of the Humor Climate Questionnaire (HCQ), designed to measure humor as organizational climate feature. The authors employed back-translation and independent judges method to choose the best version of the translated items. The psychometric properties of HCQ were estimated on the basis of 2 samples: the basic group of employees (N = 217) and the group of employees who had completed the survey twice (N = 55). The results of statistical analyses proved that HCQ is a reliable tool. Explorative Factor Analysis supported the 4-factor structure of the original method's theoretical model. The validity of the subscales is high, Cronbach's α varied from 0.8 to 0.9. The directions and values of intercorrelations between subscales were similar to those of the English version. The Humor Climate Questionnaire is a relatively time-stable tool (r = 0.44-0.74). Polish adaptation is reliable and applicable for cross-sectional studies. The obtained results are comparable to the characteristics of the original version. However, the results of factor analysis show that the data do not fully fit the theoretical model. Med Pr 2018;69(2):143-152. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Development and Validation of the Behavioral Tendencies Questionnaire.

Directory of Open Access Journals (Sweden)

Nicholas T Van Dam

Full Text Available At a fundamental level, taxonomy of behavior and behavioral tendencies can be described in terms of approach, avoid, or equivocate (i.e., neither approach nor avoid. While there are numerous theories of personality, temperament, and character, few seem to take advantage of parsimonious taxonomy. The present study sought to implement this taxonomy by creating a questionnaire based on a categorization of behavioral temperaments/tendencies first identified in Buddhist accounts over fifteen hundred years ago. Items were developed using historical and contemporary texts of the behavioral temperaments, described as "Greedy/Faithful", "Aversive/Discerning", and "Deluded/Speculative". To both maintain this categorical typology and benefit from the advantageous properties of forced-choice response format (e.g., reduction of response biases, binary pairwise preferences for items were modeled using Latent Class Analysis (LCA. One sample (n1 = 394 was used to estimate the item parameters, and the second sample (n2 = 504 was used to classify the participants using the established parameters and cross-validate the classification against multiple other measures. The cross-validated measure exhibited good nomothetic span (construct-consistent relationships with related measures that seemed to corroborate the ideas present in the original Buddhist source documents. The final 13-block questionnaire created from the best performing items (the Behavioral Tendencies Questionnaire or BTQ is a psychometrically valid questionnaire that is historically consistent, based in behavioral tendencies, and promises practical and clinical utility particularly in settings that teach and study meditation practices such as Mindfulness Based Stress Reduction (MBSR.

To Construction and Standardization of the Waiting Anxiety Questionnaire (WAQ in Iran.

Directory of Open Access Journals (Sweden)

Sodeh Tavakkoli

2014-09-01

Full Text Available This study aimed to develop and validate a questionnaire to measure waiting anxiety.This was a cross-sectional study. Extensive review of literature and expert opinions were used to develop and validate the waiting anxiety questionnaire. A sample of 321 participants was recruited through random cluster sampling (n= 190 Iranian men and n= 131 women. The participants filled out WAQ, the Speilberger's State-Trait Anxiety Inventory (STAI, Burtner Rating scale (BRS and Eysenk Personality questionnaire (EPQ for adults.Internal consistency of WAQ was revealed, meaning that all the 20 items were highly correlated with the total score. The Cronbach alpha equaled 0.83 for the Waiting Anxiety Questionnaire. The Pearson correlation coefficient of the questionnaire with the STAI, BRS and extraversion and neuroticism subscales of EPQ was 0.65, 0.78, - 0.47 and 0.43, respectively, which confirmed its convergent and divergent validity. Factors analysis extracting four cognitive, behavioral, sentimental and physiological factors could explain 67% of the total variance with an Eigen value of greater than 1.Our findings suggest that WAQ possesses appropriate validity and reliability to measure the individuals' anxiety during the waiting time.

Multicultural personality questionnaire : Development of a short form

NARCIS (Netherlands)

Van Der Zee, Karen; Van Oudenhoven, Jan Pieter; Ponterotto, Joseph G.; Fietzer, Alexander W.

2013-01-01

This study reports on the development of the Multicultural Personality Questionnaire-Short Form among 511 participants. Using a split-sample scale validation design, Study 1 (N = 260) employed a principal component analysis and rigorous item selection criteria to extract a 40-item short form

The measurement artifact in the Organizational Commitment Questionnaire.

Science.gov (United States)

Caught, K; Shadur, M A; Rodwell, J J

2000-12-01

This study empirically examined the debate in the literature regarding the dimensionality of the Organizational Commitment Questionnaire. The sample comprised 803 employees from organizations in the information technology and hospitality industries. Confirmatory factor analysis showed that the Organizational Commitment Questionnaire appears to have a two-factor structure, with one factor consisting of positively worded items and the other factor, negatively worded items. Scores on both factors correlated significantly with job satisfaction, suggesting that both factors appear to be measuring a similar aspect of organizational commitment and that they present as two factors given as measurement artifacts of the item wording.

216-Day report for Tank 241-C-111, cores 58 and 59

International Nuclear Information System (INIS)

Rice, A.D.

1994-01-01

Three core samples from tank C-111, and a field blank, were received by the 222-S laboratories. Cores 58, 59, and the field blank were analyzed in accordance with plans. A hot cell blank was analyzed at the direction of the hot cell chemist. No sample results exceeded the notification limits. Core 60 was not analyzed

Factor Structure and Psychometric Properties of the Young Schema Questionnaire (Short Form) in Chinese Undergraduate Students

Science.gov (United States)

Cui, Lixia; Lin, Wenwen; Oei, Tian P. S.

2011-01-01

This study investigated cross-cultural differences in the factor structure and psychometric properties of the Young Schema Questionnaire (short form; YSQ-SF). The participants were 712 Chinese undergraduate students. The total sample was randomly divided into two sub-samples. Exploratory Factor Analysis (EFA) was conducted on questionnaire results…

[Experiences with the Three-Factor Eating Questionnaire-R21 in young men].

Science.gov (United States)

Czeglédi, Edit

2017-09-01

Eating behaviours play a crucial role in the development of obesity. To conduct a psychometric analysis of the Three-Factor Eating Questionnaire-R21 and to investigate the correlates of obesogenic eating behaviours among males. Participants of the cross-sectional questionnaire-based study were male university students (n = 239, mean of age: 20.3 years, SD = 2.78 years). self-reported body weight and body height, Three-Factor Eating Questionnaire-R21, Trait Anxiety Scale of the State-Trait Anxiety Inventory. Results of confirmatory factor analysis supported the theoretical model of the Three-Factor Eating Questionnaire-R21 (χ 2 (186) = 366.1, peating behaviours, such as uncontrolled eating, cognitive restraint, and emotional eating. Results support the construct validity and reliability of the Three-Factor Eating Questionnaire-R21 among males and highlight the importance of taking psychological factors into account in the prevention of obesity. Orv Hetil. 2017; 158(37): 1469-1477.

Psychometric properties of the Dresden Body Image Questionnaire: A multiple-group confirmatory factor analysis across sex and age in a Dutch non-clinical sample.

Directory of Open Access Journals (Sweden)

Mia Scheffers

Full Text Available Body image has implications for psychosocial functioning and quality of life and its disturbance is reported in a broad range of psychiatric disorders. In view of the lack of instruments in Dutch measuring body image as a broad concept, we set out to make an instrument available that reflects the multidimensional character of this construct by including more dimensions than physical appearance. The Dresden Körperbildfragebogen (DBIQ, Dresden Body Image Questionnaire particularly served this purpose. The DBIQ consists of 35 items and five subscales: body acceptance, sexual fulfillment, physical contact, vitality, and self-aggrandizement. The main objective of the present study was to evaluate the psychometric properties of the Dutch translation of the Dresden Body Image Questionnaire (DBIQ-NL in a non-clinical sample.The psychometric properties of the DBIQ-NL were examined in a non-clinical sample of 988 respondents aged between 18 and 65. We investigated the subscales' internal consistency and test-retest reliability. In order to establish construct validity we evaluated the association with a related construct, body cathexis, and with indices of self-esteem and psychological wellbeing. The factor structure of the DBIQ-NL was examined via confirmatory factor analysis (CFA. The equivalence of the measurement model across sex and age was evaluated by multiplegroup confirmatory factor analyses.Confirmatory factor analyses showed a structure in accordance with the original scale, where model fit was improved significantly by moving one item to another subscale. Multiple group confirmatory factor analysis across sex and age demonstrated partial strong invariance. Internal consistency was good with little overlap between the subscales. Temporal reliability and construct validity were satisfactory.Results indicate that the DBIQ-NL is a reliable and valid instrument for non-clinical subjects. This provides a sound basis for further investigation of the

Psychometric properties of the Dresden Body Image Questionnaire: A multiple-group confirmatory factor analysis across sex and age in a Dutch non-clinical sample.

Science.gov (United States)

Scheffers, Mia; van Duijn, Marijtje A J; Bosscher, Ruud J; Wiersma, Durk; Schoevers, Robert A; van Busschbach, Jooske T

2017-01-01

Body image has implications for psychosocial functioning and quality of life and its disturbance is reported in a broad range of psychiatric disorders. In view of the lack of instruments in Dutch measuring body image as a broad concept, we set out to make an instrument available that reflects the multidimensional character of this construct by including more dimensions than physical appearance. The Dresden Körperbildfragebogen (DBIQ, Dresden Body Image Questionnaire) particularly served this purpose. The DBIQ consists of 35 items and five subscales: body acceptance, sexual fulfillment, physical contact, vitality, and self-aggrandizement. The main objective of the present study was to evaluate the psychometric properties of the Dutch translation of the Dresden Body Image Questionnaire (DBIQ-NL) in a non-clinical sample. The psychometric properties of the DBIQ-NL were examined in a non-clinical sample of 988 respondents aged between 18 and 65. We investigated the subscales' internal consistency and test-retest reliability. In order to establish construct validity we evaluated the association with a related construct, body cathexis, and with indices of self-esteem and psychological wellbeing. The factor structure of the DBIQ-NL was examined via confirmatory factor analysis (CFA). The equivalence of the measurement model across sex and age was evaluated by multiplegroup confirmatory factor analyses. Confirmatory factor analyses showed a structure in accordance with the original scale, where model fit was improved significantly by moving one item to another subscale. Multiple group confirmatory factor analysis across sex and age demonstrated partial strong invariance. Internal consistency was good with little overlap between the subscales. Temporal reliability and construct validity were satisfactory. Results indicate that the DBIQ-NL is a reliable and valid instrument for non-clinical subjects. This provides a sound basis for further investigation of the DBIQ-NL in a

Preschool children and relative analgesia: satisfaction grading through a verbal questionnaire.

Science.gov (United States)

Arcari, S; Ferro, R

2008-03-01

The aim of the study was to assess 100 preschool children's satisfaction grading of relative analgesia (RA) after completing dental treatment by collecting their opinion on this technique through a verbal questionnaire. After completing dental care a simple verbal questionnaire (3 questions) was administered by the operator. The questionnaire investigated: 1) patient's satisfaction about the sedation treatment; 2) patient's agreement to re-experiment the technique and 3) patient's emotions while sedated. Moreover, following treatment, each child was invited to make a drawing on the experience. Data obtained were classified in 3 groups: group 1 (87% of children) appreciated RA and would agree to repeat the experience; group 2 (4% of the sample) did not answer the verbal questionnaire and group 3 (9%) did not enjoy the sedation technique. Only 15 children completed a drawing; conducting a psychological analysis through C.R. Rogers' theory of Person Centred Approach coupled with the handwriting analysis methodology defined by Girolamo Moretti, positive features were found in the majority of the drawings (13 out of 15). The majority (87%) of the sample appreciated to experience nitrous oxide inhalation sedation and would undergo a further appointment under RA.

Design of psychosocial factors questionnaires: a systematic measurement approach

Science.gov (United States)

Vargas, Angélica; Felknor, Sarah A

2012-01-01

Background Evaluation of psychosocial factors requires instruments that measure dynamic complexities. This study explains the design of a set of questionnaires to evaluate work and non-work psychosocial risk factors for stress-related illnesses. Methods The measurement model was based on a review of literature. Content validity was performed by experts and cognitive interviews. Pilot testing was carried out with a convenience sample of 132 workers. Cronbach’s alpha evaluated internal consistency and concurrent validity was estimated by Spearman correlation coefficients. Results Three questionnaires were constructed to evaluate exposure to work and non-work risk factors. Content validity improved the questionnaires coherence with the measurement model. Internal consistency was adequate (α=0.85–0.95). Concurrent validity resulted in moderate correlations of psychosocial factors with stress symptoms. Conclusions Questionnaires´ content reflected a wide spectrum of psychosocial factors sources. Cognitive interviews improved understanding of questions and dimensions. The structure of the measurement model was confirmed. PMID:22628068

Data validation report for the 100-FR-3 Operable Unit, third round groundwater samples

International Nuclear Information System (INIS)

Ayres, J.M.

1994-01-01

Westinghouse-Hanford has requested that a minimum of 20% of the total number of Sample Delivery Groups be validated for the 100-FR-3 operable Unit Third Round Groundwater sampling investigation. Therefore, the data from the chemical analysis of 51 samples from this sampling event and their related quality assurance samples were reviewed and validated to verify that reported sample results were of sufficient quality to support decisions regarding remedial actions performed at this site. The report is broken down into sections for each chemical analysis and radiochemical analysis type. Each section addresses the data package completeness, holding time adherence, instrument calibration and tuning acceptability, blank results, accuracy, precision, system performance, as well as the compound identification and quantitation. In addition, each section has an overall assessment and summary for the data packages reviewed for the particular chemical/radiochemical analyses. Detailed backup information is provided to the reader by SDG No. and sample number. For each data package, a matrix of chemical analyses per sample number is presented, as well as data qualification summaries

The second version of the Copenhagen Psychosocial Questionnaire

DEFF Research Database (Denmark)

Pejtersen, Jan Hyld; Kristensen, Tage Søndergård; Borg, Vilhelm

2010-01-01

AIMS: The aim of the present paper is to present the development of the second version of the Copenhagen Psychosocial Questionnaire (COPSOQ II). METHODS: The development of COPSOQ II took place in five main steps: (1) We considered practical experience from the use of COPSOQ I, in particular...... feedback from workplace studies where the questionnaire had been used; (2) All scales concerning workplace factors in COPSOQ I were analyzed for differential item functioning (DIF) with regard to gender, age and occupational status; (3) A test version of COPSOQ II including new scales and items...... was developed and tested in a representative sample of working Danes between 20 and 59 years of age. In all, 3,517 Danish employees participated in the study. The overall response rate was 60.4%; (4) Based on psychometric analyses, the final questionnaire was developed; and (5) Criteria-related validity...

[Design and validation of an oral health questionnaire for preoperative anaesthetic evaluation].

Science.gov (United States)

Ruíz-López Del Prado, Gema; Blaya-Nováková, Vendula; Saz-Parkinson, Zuleika; Álvarez-Montero, Óscar Luis; Ayala, Alba; Muñoz-Moreno, Maria Fe; Forjaz, Maria João

Dental injuries incurred during endotracheal intubation are more frequent in patients with previous oral pathology. The study objectives were to develop an oral health questionnaire for preanaesthesia evaluation, easy to apply for personnel without special dental training; and establish a cut-off value for detecting persons with poor oral health. Validation study of a self-administered questionnaire, designed according to a literature review and an expert group's recommendations. The questionnaire was applied to a sample of patients evaluated in a preanaesthesia consultation. Rasch analysis of the questionnaire psychometric properties included viability, acceptability, content validity and reliability of the scale. The sample included 115 individuals, 50.4% of men, with a median age of 58 years (range: 38-71). The final analysis of 11 items presented a Person Separation Index of 0.861 and good adjustment of data to the Rasch model. The scale was unidimensional and its items were not biased by sex, age or nationality. The oral health linear measure presented good construct validity. The cut-off value was set at 52 points. The questionnaire showed sufficient psychometric properties to be considered a reliable tool, valid for measuring the state of oral health in preoperative anaesthetic evaluations. Copyright © 2016 Sociedade Brasileira de Anestesiologia. Publicado por Elsevier Editora Ltda. All rights reserved.

Design and validation of an oral health questionnaire for preoperative anaesthetic evaluation

Directory of Open Access Journals (Sweden)

Gema Ruíz-López del Prado

Full Text Available Abstract Background and objectives: Dental injuries incurred during endotracheal intubation are more frequent in patients with previous oral pathology. The study objectives were to develop an oral health questionnaire for preanaesthesia evaluation, easy to apply for personnel without special dental training; and establish a cut-off value for detecting persons with poor oral health. Methods: Validation study of a self-administered questionnaire, designed according to a literature review and an expert group's recommendations. The questionnaire was applied to a sample of patients evaluated in a preanaesthesia consultation. Rasch analysis of the questionnaire psychometric properties included viability, acceptability, content validity and reliability of the scale. Results: The sample included 115 individuals, 50.4% of men, with a median age of 58 years (range: 38-71. The final analysis of 11 items presented a Person Separation Index of 0.861 and good adjustment of data to the Rasch model. The scale was unidimensional and its items were not biased by sex, age or nationality. The oral health linear measure presented good construct validity. The cut-off value was set at 52 points. Conclusions: The questionnaire showed sufficient psychometric properties to be considered a reliable tool, valid for measuring the state of oral health in preoperative anaesthetic evaluations.

Design and validation of an oral health questionnaire for preoperative anaesthetic evaluation.

Science.gov (United States)

Ruíz-López Del Prado, Gema; Blaya-Nováková, Vendula; Saz-Parkinson, Zuleika; Álvarez-Montero, Óscar Luis; Ayala, Alba; Muñoz-Moreno, Maria Fe; Forjaz, Maria João

Dental injuries incurred during endotracheal intubation are more frequent in patients with previous oral pathology. The study objectives were to develop an oral health questionnaire for preanaesthesia evaluation, easy to apply for personnel without special dental training; and establish a cut-off value for detecting persons with poor oral health. Validation study of a self-administered questionnaire, designed according to a literature review and an expert group's recommendations. The questionnaire was applied to a sample of patients evaluated in a preanaesthesia consultation. Rasch analysis of the questionnaire psychometric properties included viability, acceptability, content validity and reliability of the scale. The sample included 115 individuals, 50.4% of men, with a median age of 58 years (range: 38-71). The final analysis of 11 items presented a Person Separation Index of 0.861 and good adjustment of data to the Rasch model. The scale was unidimensional and its items were not biased by sex, age or nationality. The oral health linear measure presented good construct validity. The cut-off value was set at 52 points. The questionnaire showed sufficient psychometric properties to be considered a reliable tool, valid for measuring the state of oral health in preoperative anaesthetic evaluations. Copyright © 2016 Sociedade Brasileira de Anestesiologia. Published by Elsevier Editora Ltda. All rights reserved.

Data Validation Package - April and July 2015 Groundwater and Surface Water Sampling at the Gunnison, Colorado, Processing Site

Energy Technology Data Exchange (ETDEWEB)

Linard, Joshua [Dept. of Energy (DOE), Washington, DC (United States). Office of Legacy Management; Campbell, Sam [Navarro Research and Engineering, Inc., Oak Ridge, TN (United States)

2016-02-01

This event included annual sampling of groundwater and surface water locations at the Gunnison, Colorado, Processing Site. Sampling and analyses were conducted as specified in Sampling and Analysis Plan for U.S. Department of Energy Office of Legacy Management Sites. Samples were collected from 28 monitoring wells, three domestic wells, and six surface locations in April at the processing site as specified in the 2010 Ground Water Compliance Action Plan for the Gunnison, Colorado, Processing Site. Domestic wells 0476 and 0477 were sampled in July because the homes were unoccupied in April, and the wells were not in use. Duplicate samples were collected from locations 0113, 0248, and 0477. One equipment blank was collected during this sampling event. Water levels were measured at all monitoring wells that were sampled. No issues were identified during the data validation process that requires additional action or follow-up.

A measurement error model for physical activity level as measured by a questionnaire with application to the 1999-2006 NHANES questionnaire.

Science.gov (United States)

Tooze, Janet A; Troiano, Richard P; Carroll, Raymond J; Moshfegh, Alanna J; Freedman, Laurence S

2013-06-01

Systematic investigations into the structure of measurement error of physical activity questionnaires are lacking. We propose a measurement error model for a physical activity questionnaire that uses physical activity level (the ratio of total energy expenditure to basal energy expenditure) to relate questionnaire-based reports of physical activity level to true physical activity levels. The 1999-2006 National Health and Nutrition Examination Survey physical activity questionnaire was administered to 433 participants aged 40-69 years in the Observing Protein and Energy Nutrition (OPEN) Study (Maryland, 1999-2000). Valid estimates of participants' total energy expenditure were also available from doubly labeled water, and basal energy expenditure was estimated from an equation; the ratio of those measures estimated true physical activity level ("truth"). We present a measurement error model that accommodates the mixture of errors that arise from assuming a classical measurement error model for doubly labeled water and a Berkson error model for the equation used to estimate basal energy expenditure. The method was then applied to the OPEN Study. Correlations between the questionnaire-based physical activity level and truth were modest (r = 0.32-0.41); attenuation factors (0.43-0.73) indicate that the use of questionnaire-based physical activity level would lead to attenuated estimates of effect size. Results suggest that sample sizes for estimating relationships between physical activity level and disease should be inflated, and that regression calibration can be used to provide measurement error-adjusted estimates of relationships between physical activity and disease.

Child abuse: validation of a questionnaire translated into Brazilian Portuguese

Directory of Open Access Journals (Sweden)

Glaucia Marengo

2013-04-01

Full Text Available This study sought to validate the Portuguese translation of a questionnaire on maltreatment of children and adolescents, developed by Russell et al. and to test its psychometric properties for use in Brazil. The original questionnaire was translated into Portuguese using a standardized forward-backward linguistic translation method. Both face and content validity were tested in a small pilot study (n = 8. In the main study, a convenience sample of 80 graduate dentistry students with different specialties, from Curitiba, PR, Brazil, were invited to complete the final Brazilian version of the questionnaire. Discriminant validity was assessed by comparing the results obtained from the questionnaire for different specialties (pediatric dentistry, for example. The respondents completed the questionnaire again after 4 weeks to evaluate test-retest reliability. The comparison of test versus retest questionnaire answers showed good agreement (kappa > 0.53, intraclass correlation > 0.84 for most questions. In regard to discriminant validity, a statistically significant difference was observed only in the experience and interest domains, in which pediatric dentists showed more experience with and interest in child abuse compared with dentists of other specialties (Mann-Whitney test, p < 0.05. The Brazilian version of the questionnaire was valid and reliable for assessing knowledge regarding child abuse by Portuguese-speaking dentists.

Validity of the Danish Prostate Symptom Score questionnaire in stroke

DEFF Research Database (Denmark)

Tibaek, S.; Dehlendorff, Christian

2009-01-01

Objective – To determine the content and face validity of the Danish Prostate Symptom Score (DAN-PSS-1) questionnaire in stroke patients. Materials and methods – Content validity was judged among an expert panel in neuro-urology. The judgement was measured by the content validity index (CVI). Face...... validity was indicated in a clinical sample of 482 stroke patients in a hospital-based, cross-sectional survey. Results – I-CVI was rated >0.78 (range 0.94–1.00) for 75% of symptom and bother items corresponding to adequate content validity. The expert panel rated the entire DAN-PSS-1 questionnaire highly...... questionnaire appears to be content and face valid for measuring lower urinary tract symptoms after stroke....

Validation of the Pregnancy Physical Activity Questionnaire (PPAQ

Directory of Open Access Journals (Sweden)

Edyta Suliga

2017-03-01

Full Text Available Introduction : The results of many studies confirm the positive effect of physical activity during pregnancy on the health of both mother and child. Due to this, it is important to use standardised methods of its assessment. In 2004, Chasan-Taber et al. developed the Pregnancy Physical Activity Questionnaire (PPAQ, taking into account household/caregiving activities, occupational activities, sports/exercise activities, transportation activities, and inactivity. Aim of the research : The validation of the Pregnancy Physical Activity Questionnaire (PPAQ by determination of its reproducibility. Material and methods : The questionnaire was validated from June 2014 to February 2015 among 164 women. The respondents were surveyed twice in a 2-week interval. The repeatability of the questionnaire was verified by determining the Pearson correlation coefficient between the results obtained for the same people in the first and second interview, thus determining the intra-subject variability. Inter-subject variability was analysed by comparing the average values of physical activity for the whole group using the Student’s t-test for dependent samples. Results : For all levels of physical activity, a high correlation between the results obtained in both interviews was found. The correlation coefficient for total physical activity was r = 0.96. The reproducibility of the results obtained from PPAQ questionnaire was the highest for inactivity and moderate activity (r = 0.96. The analysis according to the type of activity showed that the reproducibility was the highest for occupational activity (r = 0.98. Conclusions : High reproducibility of results obtained using PPAQ questionnaire was found. This allows the assessed questionnaire to be considered as an accurate measurement tool that can be a source of reliable information about physical activity in pregnant women.

Trait sexual motivation questionnaire: concept and validation.

Science.gov (United States)

Stark, Rudolf; Kagerer, Sabine; Walter, Bertram; Vaitl, Dieter; Klucken, Tim; Wehrum-Osinsky, Sina

2015-04-01

Trait sexual motivation defines a psychological construct that reflects the long-lasting degree of motivation for sexual activities, which is assumed to be the result of biological and sociocultural influences. With this definition, it shares commonalities with other sexuality-related constructs like sexual desire, sexual drive, sexual needs, and sexual compulsivity. The Trait Sexual Motivation Questionnaire (TSMQ) was developed in order to measure trait sexual motivation with its different facets. Several steps were conducted: First, items were composed assessing sexual desire, the effort made to gain sex, as well as specific sexual behaviors. Factor analysis of the data of a first sample (n = 256) was conducted. Second, the factor solution was verified by a confirmatory factor analysis in a second sample (n = 498) and construct validity was demonstrated. Third, the temporal stability of the TSMQ was tested in a third study (n = 59). Questionnaire data. The exploratory and confirmatory factor analyses revealed that trait sexual motivation is best characterized by four subscales: Solitary Sexuality, Importance of Sex, Seeking Sexual Encounters, and Comparison with Others. It could be shown that the test quality of the questionnaire is high. Most importantly for the trait concept, the retest reliability after 1 year was r = 0.87. Our results indicate that the TSMQ is indeed a suitable tool for measuring long-lasting sexual motivation with high test quality and high construct validity. A future differentiation between trait and state sexual motivation might be helpful for clinical as well as forensic research. © 2015 International Society for Sexual Medicine.

Aplicación del láser de diodo para la soldadura en tailored blanks

Directory of Open Access Journals (Sweden)

Bocos, J. L.

2004-04-01

Full Text Available During the last years, one of the most interesting subjects in the automotive industry is the weight reduction of the automobile, and so to diminish the fuel consumption. Among other performances, the use in the body car of materials which have high mechanical resistance must be considered for the weight reduction of the automobile and maintaining high benefits. In this work, it has been studied the utilization of the diode laser for high resistance steel sheets welding, concretely microalloying steels (ZStE, DP "dual phase" and TRIP "transformation induced plasticity". These steels can be employed in "tailored blanks", which are defined as two or more separate pieces of flat material of dissimilar thickness and/or physical properties joined together before forming, to provide superior qualities in the finished stamped part. In this study, the metallographic characterization has been realised in the welding seams; and the mechanical behaviour has been analysed employing the following tests: microhardness, drawing, tensile and fatigue.

Uno de los puntos de mayor interés para la industria de la automoción, en los últimos años, es la reducción en peso del automóvil y conseguir, con ello, rebajar el consumo de combustible. Disminuir el peso del automóvil y mantener unas elevadas prestaciones implica, entre otras actuaciones, la utilización de materiales en la carrocería que posean una elevada resistencia mecánica. En este trabajo se presenta el estudio de la viabilidad de la utilización del láser de diodo para la soldadura de chapas de acero de alta resistencia; concretamente de aceros ferríticos microaleados (ZStE, DP (dual phase y TRIP (transformation induced plasticity. Todos ellos, son materiales que pueden formar parte de tailored blanks que se definen como piezas constituidas por la unión, mediante soldadura, de chapas de acero de distintas calidades y espesores. En este estudio se ha profundizado en

Metric characteristics of Children-parents relationship questionnaire (VOS: a preliminary study

Directory of Open Access Journals (Sweden)

Ana Kozina

2010-11-01

Full Text Available The purpose of the article is to introduce the Children-parents relationship questionnaire (VOS and to present its metric characteristics. The questionnaire is based on parental styles of D. Baumrind (1967 and 3D model of parental styles developed by Milivojević and others (2004. The questionnaire was developed under assumption that relationship between children and their parents influences educational achievement of children. Results on convenience sample (N = 333 of seventh, eighth and ninth grade students in Slovenia show a three dimensional structure of the questionnaire: (a authoritative parental style and autonomy, (b authoritarian parental style and (c rewarding. Questionnaires' reliability in terms of internal consistency (,72 > α < ,95 as well as sensitivity (average r = ,67 proved to be sufficient. Our results show significant gender differences in perceived authoritative parental style and autonomy as well as low association between school grades and the perceived relationship.

Automated Sample Preparation for Radiogenic and Non-Traditional Metal Isotopes: Removing an Analytical Barrier for High Sample Throughput

Science.gov (United States)

Field, M. Paul; Romaniello, Stephen; Gordon, Gwyneth W.; Anbar, Ariel D.; Herrmann, Achim; Martinez-Boti, Miguel A.; Anagnostou, Eleni; Foster, Gavin L.

2014-05-01

MC-ICP-MS has dramatically improved the analytical throughput for high-precision radiogenic and non-traditional isotope ratio measurements, compared to TIMS. The generation of large data sets, however, remains hampered by tedious manual drip chromatography required for sample purification. A new, automated chromatography system reduces the laboratory bottle neck and expands the utility of high-precision isotope analyses in applications where large data sets are required: geochemistry, forensic anthropology, nuclear forensics, medical research and food authentication. We have developed protocols to automate ion exchange purification for several isotopic systems (B, Ca, Fe, Cu, Zn, Sr, Cd, Pb and U) using the new prepFAST-MC™ (ESI, Nebraska, Omaha). The system is not only inert (all-flouropolymer flow paths), but is also very flexible and can easily facilitate different resins, samples, and reagent types. When programmed, precise and accurate user defined volumes and flow rates are implemented to automatically load samples, wash the column, condition the column and elute fractions. Unattended, the automated, low-pressure ion exchange chromatography system can process up to 60 samples overnight. Excellent reproducibility, reliability, recovery, with low blank and carry over for samples in a variety of different matrices, have been demonstrated to give accurate and precise isotopic ratios within analytical error for several isotopic systems (B, Ca, Fe, Cu, Zn, Sr, Cd, Pb and U). This illustrates the potential of the new prepFAST-MC™ (ESI, Nebraska, Omaha) as a powerful tool in radiogenic and non-traditional isotope research.

[Sleep quality of nurses working in shifts - Hungarian adaptation of the Bergen Shift Work Sleep Questionnaire].

Science.gov (United States)

Fusz, Katalin; Tóth, Ákos; Fullér, Noémi; Müller, Ágnes; Oláh, András

2015-12-06

Sleep disorders among shift workers are common problems due to the disturbed circadian rhythm. The Bergen Shift Work Sleep Questionnaire assesses discrete sleep problems related to work shifts (day, evening and night shifts) and rest days. The aim of the study was to develop the Hungarian version of this questionnaire and to compare the sleep quality of nurses in different work schedules. 326 nurses working in shifts filled in the questionnaire. The authors made convergent and discriminant validation of the questionnaire with the Athens Insomnia Scale and the Perceived Stress Questionnaire. The questionnaire based on psychometric characteristics was suitable to assess sleep disorders associated with shift work in a Hungarian sample. The frequency of discrete symptoms significantly (pshifts. Nurses experienced the worst sleep quality and daytime fatigue after the night shift. Nurses working in irregular shift system had worse sleep quality than nurses working in regular and flexible shift system (pworking in shifts should be assessed with the Hungarian version of the Bergen Shift Work Sleep Questionnaire on a nationally representative sample, and the least burdensome shift system could be established.

Radiocarbon dating organic residues at the microgram level

International Nuclear Information System (INIS)

Kirner, D.L.; Burky, R.; Taylor, R.E.

1997-01-01

Relation between submilligram sample size and 14 C activity for sample blanks (wood from Pliocene sediments) and a contemporary standard (oxalic acid) for catalytically reduced graphitic carbon was examined down to 20 micrograms. Mean age of the 1 mg wood sample blanks is now about 51.3 ka (0.168 pMC) while the mean for 20 microgram sample blanks is about 42.9 ka. So far, the lowest value for a 1-mg wood sample blank is about 60.5 ka (0.056 pMC). We have determined a mean 14 C age of about 9.4 ka from a suite of 7 organic extracts from hair, bone, and matting from a mummified human skeleton from Spirit Cave, Nevada. These data indicate that the Spirit Cave human is the third, oldest directly-dated, human skeleton currently known from North America

Questionnaire for low back pain in the garment industry workers.

Science.gov (United States)

Bindra, Supreet; Sinha, A G K; Benjamin, A I

2013-05-01

Low back pain affects up to 90% of the world's population at some point in their lives. Until date no questionnaire has been designed for back pain in the garment industry workers. Therefore, the objective of this study is to design a questionnaire to determine the prevalence, risk factors, impact, health care service utilization and back pain features in the garment industry workers and gain preliminary experience of its use. The content validity and reliability of the questionnaire was established. Items showing acceptable internal consistency and moderate to high test re-test reliability were retained in the questionnaire. Items showing unacceptable internal consistency, low test re-test reliability or poor differentiation were reworded, redrafted and re-tested on the workers. It took 20 min to complete one interview schedule. Environmental factors such as the absence of the garment industry owner/supervisor or co-workers at the time of the interview and interview during leisure hours need to be standardized. Thus, final questionnaire is ready for use after necessary amendments and will be used on the larger sample size in the main study.

The Game Experience Questionnaire

NARCIS (Netherlands)

IJsselsteijn, W.A.; de Kort, Y.A.W.; Poels, K.

2013-01-01

This document contains the English version of the Game Experience Questionnaire. The development and testing of the Game Experience Questionnaire is described in project Deliverable 3.3. The Game Experience Questionnaire has a modular structure and consists of : 1. The core questionnaire 2. The

Quality Assessment of TPB-Based Questionnaires: A Systematic Review

Science.gov (United States)

Oluka, Obiageli Crystal; Nie, Shaofa; Sun, Yi

2014-01-01

Objective This review is aimed at assessing the quality of questionnaires and their development process based on the theory of planned behavior (TPB) change model. Methods A systematic literature search for studies with the primary aim of TPB-based questionnaire development was conducted in relevant databases between 2002 and 2012 using selected search terms. Ten of 1,034 screened abstracts met the inclusion criteria and were assessed for methodological quality using two different appraisal tools: one for the overall methodological quality of each study and the other developed for the appraisal of the questionnaire content and development process. Both appraisal tools consisted of items regarding the likelihood of bias in each study and were eventually combined to give the overall quality score for each included study. Results 8 of the 10 included studies showed low risk of bias in the overall quality assessment of each study, while 9 of the studies were of high quality based on the quality appraisal of questionnaire content and development process. Conclusion Quality appraisal of the questionnaires in the 10 reviewed studies was successfully conducted, highlighting the top problem areas (including: sample size estimation; inclusion of direct and indirect measures; and inclusion of questions on demographics) in the development of TPB-based questionnaires and the need for researchers to provide a more detailed account of their development process. PMID:24722323

A short form of the Diabetes Quality of Life for Youth questionnaire

DEFF Research Database (Denmark)

Skinner, T. C.; Hoey, H.; McGee, H. M.

2006-01-01

Aims/hypothesis: The aim of this study was to test the construct validity of the Diabetes Quality of Life for Youth (DQOLY) questionnaire in a large representative sample of young people with type 1 diabetes mellitus. Methods: The 52-item DQOLY questionnaire was completed by 2,077 adolescent...... of a revised questionnaire, two with four factors and one with six factors, with all models indicating the presence of one satisfaction scale, but with many of the impact and worry scale items either double loading or not loading on any factors. Subsequent confirmatory analysis indicated that compared...... with the original DQOLY scales, the six-factor solution was the best-fitting model. Conclusions/interpretation: The DQOLY factor structure does not show construct validity in a large, diverse representative sample of young people with type 1 diabetes. However, a revised (short-form) version of the DQOLY is proposed...

Proposal for the award of two contracts for the supply of fine-blanked austenitic steel yoke laminations and inserts for the cold masses of the LHC superconducting dipole magnets

CERN Document Server

1999-01-01

This document concerns the award of two contracts for the total supply of 642 000 fine-blanked austenitic steel yoke laminations, of two different types, and 642 000 inserts for the cold masses of the LHC superconducting dipole magnets. Following a market survey carried out among 70 firms in sixteen Member States and one firm in Japan, a call for tenders (IT-2700/LHC/LHC) was sent on 3 June 1999 to seven firms in four Member States and one firm in Japan. By the closing date, CERN had received five tenders. The Finance Committee is invited to agree to the negotiation of two contracts with: - ELAY INDUSTRIAL (ES) for the supply of 324 000 fine-blanked austenitic steel yoke laminations of the first type and the corresponding number of inserts, which represents the total required quantity of laminations of the first type and of corresponding inserts for the cold masses of the LHC superconducting dipole magnets, for a total amount of 481 814 euros, which at the exchange rate given in the tender correspond to 770 8...

Improving the Quality of Cast Ingot for the Production of Defect-Free Rolled and Polished Blanks of Silver-Copper Coinage Alloy

Science.gov (United States)

Chakrabarti, Debalay; Chakrabarti, Ajit Kumar; Roy, Sanat Kumar

2018-05-01

The causes of defect generation in Ag-7.5 wt% Cu coinage alloy billets and in rolled and polished blanks were evaluated in this paper. Microstructural and compositional study of the as-cast billets indicated that excessive formation of gas-porosity and shrinkage cavity was responsible for crack formation during rolling. Carbon pick-up from charcoal flux cover used during melting, formation of CuS inclusions due to high-S content and rapid work-hardening also contributed to cracking during rolling. In order to prevent the defect generation, several measures were adopted. Those measures significantly reduced the defect generation and improved the surface luster of the trial rolled strips.

Respiratory health as a predictor of questionnaire return in a sample of United States underground coal miners

Energy Technology Data Exchange (ETDEWEB)

Trent, R B; Ames, R G

1987-06-01

A logistic model was used to analyse questionnaire return in a postal survey of 311 coalminers, who had left their place of employment between 1977 and 1982. Three measures of respiratory health, obstruction, restriction, and presence of chronic bronchitis symptoms, were included in the model as predictors together with the possibly confounding factors of age, education and marital and smoking status. Age was positively associated with questionnaire return (p<0.001). Speed of return, and whether the return was in response to a prompt, were not predicted by either the respiratory health measures or any of the other possibly confounding variables. 47 refs., 2 tabs.

The Strengths and Difficulties Questionnaire in the Nordic countries

DEFF Research Database (Denmark)

Obel, Carsten; Heiervang, Einar; Rodriguez, Alina

2004-01-01

BACKGROUND: The Strengths and Difficulties Questionnaire (SDQ) has been translated into the different Nordic languages between 1996 and 2003. During the past few years, SDQs have been completed for nearly 100,000 children and adolescents in population-based studies as well as in clinical samples...

Factorial and construct validity of the Sibling Relationship Questionnaire

NARCIS (Netherlands)

Derkman, M.M.S.; Scholte, R.H.J.; Veld, W.M. van der; Engels, R.C.M.E.

2010-01-01

The psychometric properties of the shortened version of the Sibling Relationship Questionnaire (SRQ; Furman & Buhrmester, 1985) were examined in a sample of 428 Dutch adolescents, aged 13 to 16. In order to examine the dimensions Warmth/Closeness and Conflict, as proposed by Furman and Buhrmester,

Acromegaly Quality of Life Questionnaire (AcroQoL

Directory of Open Access Journals (Sweden)

Lara Nuria

2004-02-01

Full Text Available Abstract Acromegaly is a chronic disease with an important impact on patients, Health Related Quality of Life (HRQoL. The ability to effectively measure Health Related Quality of Life is central to describing the impacts of disease or treatment upon the patient, therefore the importance of having a disease specific questionnaire for acromegaly. For the development of the AcroQoL questionnaire different sources of information were used: first a literature search was performed to identify relevant papers describing the impact of acromegaly in HRQoL, second the main domains of impact on HRQoL were identified by 10 experts endocrinologists, and third ten in-depth semi-structured interviews were conducted in acromegalic patients to identify domains and items related to the self-perceived impact of acromegaly in patients' life. After a proper qualitative analysis a preliminary 38 item questionnaire was obtained. Rasch analysis concluded with a final 22 item questionnaire. The measurement properties (validity and reliability of the resulting final questionnaire were tested and compared using standard procedures (Cronbach's Alpha and item-total correlation. The evaluation of the item parameters confirmed the construct validity of the new instrument. Responsiveness to change was assessed in a small sample of 32 acromegalic patients with active disease in Spain who were administered the AcroQoL and the generic questionnaire EuroQoL 5-D. The results showed a statistically significant relationship between all the dimensions of AcroQoL and the VAS (visual analogic scale of EQ-5D. An improvement in the global score of AcroQoL was related to a global improvement in the VAS of the EQ-5D. Following the current recommended standard methodology the Spanish questionnaire was translated into eleven other languages.

Comparison of Employer Productivity Metrics to Lost Productivity Estimated by Commonly Used Questionnaires.

Science.gov (United States)

Gardner, Bethany T; Dale, Ann Marie; Buckner-Petty, Skye; Van Dillen, Linda; Amick, Benjamin C; Evanoff, Bradley

2016-02-01

The aim of the study was to assess construct and discriminant validity of four health-related work productivity loss questionnaires in relation to employer productivity metrics, and to describe variation in economic estimates of productivity loss provided by the questionnaires in healthy workers. Fifty-eight billing office workers completed surveys including health information and four productivity loss questionnaires. Employer productivity metrics and work hours were also obtained. Productivity loss questionnaires were weakly to moderately correlated with employer productivity metrics. Workers with more health complaints reported greater health-related productivity loss than healthier workers, but showed no loss on employer productivity metrics. Economic estimates of productivity loss showed wide variation among questionnaires, yet no loss of actual productivity. Additional studies are needed comparing questionnaires with objective measures in larger samples and other industries, to improve measurement methods for health-related productivity loss.

Comparison of employer productivity metrics to lost productivity estimated by commonly used questionnaires

Science.gov (United States)

Gardner, Bethany T.; Dale, Ann Marie; Buckner-Petty, Skye; Van Dillen, Linda; Amick, Benjamin C.; Evanoff, Bradley

2016-01-01

Objective To assess construct and discriminant validity of four health-related work productivity loss questionnaires in relation to employer productivity metrics, and to describe variation in economic estimates of productivity loss provided by the questionnaires in healthy workers. Methods 58 billing office workers completed surveys including health information and four productivity loss questionnaires. Employer productivity metrics and work hours were also obtained. Results Productivity loss questionnaires were weakly to moderately correlated with employer productivity metrics. Workers with more health complaints reported greater health-related productivity loss than healthier workers, but showed no loss on employer productivity metrics. Economic estimates of productivity loss showed wide variation among questionnaires, yet no loss of actual productivity. Conclusions Additional studies are needed comparing questionnaires with objective measures in larger samples and other industries, to improve measurement methods for health-related productivity loss. PMID:26849261

Cross-cultural validity of a dietary questionnaire for studies of dental caries risk in Japanese.

Science.gov (United States)

Shinga-Ishihara, Chikako; Nakai, Yukie; Milgrom, Peter; Murakami, Kaori; Matsumoto-Nakano, Michiyo

2014-01-02

Diet is a major modifiable contributing factor in the etiology of dental caries. The purpose of this paper is to examine the reliability and cross-cultural validity of the Japanese version of the Food Frequency Questionnaire to assess dietary intake in relation to dental caries risk in Japanese. The 38-item Food Frequency Questionnaire, in which Japanese food items were added to increase content validity, was translated into Japanese, and administered to two samples. The first sample comprised 355 pregnant women with mean age of 29.2 ± 4.2 years for the internal consistency and criterion validity analyses. Factor analysis (principal components with Varimax rotation) was used to determine dimensionality. The dietary cariogenicity score was calculated from the Food Frequency Questionnaire and used for the analyses. Salivary mutans streptococci level was used as a semi-quantitative assessment of dental caries risk and measured by Dentocult SM. Dentocult SM scores were compared with the dietary cariogenicity score computed from the Food Frequency Questionnaire to examine criterion validity, and assessed by Spearman's correlation coefficient (rs) and Kruskal-Wallis test. Test-retest reliability of the Food Frequency Questionnaire was assessed with a second sample of 25 adults with mean age of 34.0 ± 3.0 years by using the intraclass correlation coefficient analysis. The Japanese language version of the Food Frequency Questionnaire showed high test-retest reliability (ICC = 0.70) and good criterion validity assessed by relationship with salivary mutans streptococci levels (rs = 0.22; p < 0.001). Factor analysis revealed four subscales that construct the questionnaire (solid sugars, solid and starchy sugars, liquid and semisolid sugars, sticky and slowly dissolving sugars). Internal consistency were low to acceptable (Cronbach's alpha = 0.67 for the total scale, 0.46-0.61 for each subscale). Mean dietary cariogenicity scores were 50.8 ± 19.5 in the first sample, 47.4 �

Diet History Questionnaire II and Canadian Diet History Questionnaire II: Coding Guidelines

Science.gov (United States)

A questionnaire data file is an ASCII text file containing data from completed Diet History Questionnaires. If using paper forms, this file can be created by a scanner or a data entry system. If using DHQ*Web, the questionnaire data file is created automatically.

Water Intake in a Sample of Greek Adults Evaluated with the Water Balance Questionnaire (WBQ and a Seven-Day Diary

Directory of Open Access Journals (Sweden)

Adelais Athanasatou

2016-09-01

Full Text Available Awareness on the importance of hydration in health has created an unequivocal need to enrich knowledge on water intake of the general population and on the contribution of beverages to total water intake. We evaluated in the past water intake in a sample of Greek adults using two approaches. In study A, volunteers completed the Water Balance Questionnaire (WBQ, a food frequency questionnaire, designed to evaluate water intake (n = 1092; 48.1% males; 43 ± 18 years. In study B, a different population of volunteers recorded water, beverage, and food intake in seven-day diaries (n = 178; 51.1% males; 37 ± 12 years. Herein, data were reanalyzed with the objective to reveal the contribution of beverages in total water intake with these different methodologies. Beverage recording was grouped in the following categories: Hot beverages; milk; fruit and vegetable juices; caloric soft drinks; diet soft drinks; alcoholic drinks; other beverages; and water. Total water intake and water intake from beverages was 3254 (SE 43 mL/day and 2551 (SE 39 mL/day in study A; and 2349 (SE 59 mL/day and 1832 (SE 56 mL/day in study B. In both studies water had the highest contribution to total water intake, approximately 50% of total water intake, followed by hot beverages (10% of total water intake and milk (5% of total water intake. These two approaches contribute information on water intake in Greece and highlight the contribution of different beverages; moreover, they point out differences in results obtained from different methodologies attributed to limitations in their use.

Workplace air monitoring and sampling practices at DOE facilities

International Nuclear Information System (INIS)

Swinth, K.L.; Kenoyer, J.L.; Selby, J.M.

1987-01-01

The Pacific Northwest Laboratory (PNL) surveyed the current air monitoring and sampling practices at U.S. Department of Energy (DOE) facilities as a part of an air monitoring upgrade task. A comprehensive questionnaire was developed and distributed to DOE contractors through the DOE field offices. Twenty-six facilities returned a completed questionnaire. Questionnaire replies indicate a large diversity in air sampling and monitoring practices among DOE facilities. The differences among the facilities exist in monitoring and sampling instrumentation, procedures, calibration, analytical methods, detection levels, and action levels. Many of these differences could be attributed to different operational needs. 5 references, 2 figures, 2 tables

Natural and anthropogenic {sup 236}U in environmental samples

Energy Technology Data Exchange (ETDEWEB)

Steier, Peter [VERA Laboratory, Fakultaet fuer Physik - Isotopenforschung, Universitaet Wien, Waehringer Strasse 17, A-1090 Wien (Austria)], E-mail: peter.steier@univie.ac.at; Bichler, Max [Atominstitut der Osterreichischen Universitaeten, Technische Universitaet Wien, Stadionallee 2, Wien A-1020 (Austria); Keith Fifield, L. [Department of Nuclear Physics, RSPhysSE, Australian National University, Canberra, ACT 0200 (Australia); Golser, Robin; Kutschera, Walter; Priller, Alfred [VERA Laboratory, Fakultaet fuer Physik - Isotopenforschung, Universitaet Wien, Waehringer Strasse 17, A-1090 Wien (Austria); Quinto, Francesca [Dipartimento di Scienze Ambientali, Seconda Universita di Napoli, via Vivaldi 43, Caserta 81100 (Italy); Richter, Stephan [Euopean Commission, Directorate-General Joint Research Centre, Institute for Reference Materials and Measurements (IRMM), Retieseweg 111, B-2440 Geel (Belgium); Srncik, Michaela [Institut fuer Anorganische Chemie, Universitaet Wien, Waehringer Strasse 42, A-1090 Wien (Austria); Terrasi, Philippo [Dipartimento di Scienze Ambientali, Seconda Universita di Napoli, via Vivaldi 43, Caserta 81100 (Italy); Wacker, Lukas [Institute for Particle Physics, HPK H25, Schafmattstrasse 20, CH-8093 Zuerich (Switzerland); Wallner, Anton [VERA Laboratory, Fakultaet fuer Physik - Isotopenforschung, Universitaet Wien, Waehringer Strasse 17, A-1090 Wien (Austria); Wallner, Gabriele [Institut fuer Anorganische Chemie, Universitaet Wien, Waehringer Strasse 42, A-1090 Wien (Austria); Wilcken, Klaus M. [Scottish Universities Environmental Research Centre, Scottish Enterprise Technology Park, East Kilbride G75 OQF (United Kingdom); Maria Wild, Eva [VERA Laboratory, Fakultaet fuer Physik - Isotopenforschung, Universitaet Wien, Waehringer Strasse 17, A-1090 Wien (Austria)

2008-05-15

The interaction of thermal neutrons with {sup 235}U results in fission with a probability of {approx}85% and in the formation of {sup 236}U (t{sub 1/2} = 2.3 x 10{sup 7} yr) with a probability of {approx}15%. While anthropogenic {sup 236}U is, therefore, present in spent nuclear fuel at levels of {sup 236}U/U up to 10{sup -2}, the expected natural ratios in the pre-anthropogenic environment range from 10{sup -14} to 10{sup -10}. At VERA, systematic investigations suggest a detection limit below {sup 236}U/U = 5 x 10{sup -12} for samples of 0.5 mg U, while chemistry blanks of {approx}2 x 10{sup 7} atoms {sup 236}U per sample limit the sensitivity for smaller samples. We have found natural isotopic ratios in uranium reagents separated before the onset of human nuclear activities, in uranium ores from various origins and in water from a subsurface well in Bad Gastein, Austria. Anthropogenic contamination was clearly visible in soil and rivulet samples from Salzburg, Austria, whereas river sediments from Garigliano river (Southern Italy) were close to the detection limit. Finally, our natural in-house standard Vienna-KkU was calibrated against a certified reference material (IRMM REIMEP-18 A)

Approbation of Personality Questionnaire by N.B. Astanina “A Technique for Exploring Self-Trust”

Directory of Open Access Journals (Sweden)

Runets O.V.

2015-12-01

Full Text Available This paper reviews the concept of one of the basic personality traits, ‘self-trust’, and describes a tool for measuring it — a questionnaire “A Technique for Exploring Self-Trust” developed by N.B. Astanina. The questionnaire was tested on a sample of adults. Analysis of validity and reliability showed satisfactory outcomes proving that the questionnaire can be applied in research.

The Trait Emotional Intelligence Questionnaire: Internal Structure, Convergent, Criterion, and Incremental Validity in an Italian Sample

Science.gov (United States)

Andrei, Federica; Smith, Martin M.; Surcinelli, Paola; Baldaro, Bruno; Saklofske, Donald H.

2016-01-01

This study investigated the structure and validity of the Italian translation of the Trait Emotional Intelligence Questionnaire. Data were self-reported from 227 participants. Confirmatory factor analysis supported the four-factor structure of the scale. Hierarchical regressions also demonstrated its incremental validity beyond demographics, the…

Incremental Validity of the Trait Emotional Intelligence Questionnaire-Short Form (TEIQue-SF).

Science.gov (United States)

Siegling, A B; Vesely, Ashley K; Petrides, K V; Saklofske, Donald H

2015-01-01

This study examined the incremental validity of the adult short form of the Trait Emotional Intelligence Questionnaire (TEIQue-SF) in predicting 7 construct-relevant criteria beyond the variance explained by the Five-factor model and coping strategies. Additionally, the relative contributions of the questionnaire's 4 subscales were assessed. Two samples of Canadian university students completed the TEIQue-SF, along with measures of the Big Five, coping strategies (Sample 1 only), and emotion-laden criteria. The TEIQue-SF showed consistent incremental effects beyond the Big Five or the Big Five and coping strategies, predicting all 7 criteria examined across the 2 samples. Furthermore, 2 of the 4 TEIQue-SF subscales accounted for the measure's incremental validity. Although the findings provide good support for the validity and utility of the TEIQue-SF, directions for further research are emphasized.

Determination of methylmercury in marine biota samples with advanced mercury analyzer: method validation.

Science.gov (United States)

Azemard, Sabine; Vassileva, Emilia

2015-06-01

In this paper, we present a simple, fast and cost-effective method for determination of methyl mercury (MeHg) in marine samples. All important parameters influencing the sample preparation process were investigated and optimized. Full validation of the method was performed in accordance to the ISO-17025 (ISO/IEC, 2005) and Eurachem guidelines. Blanks, selectivity, working range (0.09-3.0ng), recovery (92-108%), intermediate precision (1.7-4.5%), traceability, limit of detection (0.009ng), limit of quantification (0.045ng) and expanded uncertainty (15%, k=2) were assessed. Estimation of the uncertainty contribution of each parameter and the demonstration of traceability of measurement results was provided as well. Furthermore, the selectivity of the method was studied by analyzing the same sample extracts by advanced mercury analyzer (AMA) and gas chromatography-atomic fluorescence spectrometry (GC-AFS). Additional validation of the proposed procedure was effectuated by participation in the IAEA-461 worldwide inter-laboratory comparison exercises. Copyright © 2014 Elsevier Ltd. All rights reserved.

The Challenging Experience Questionnaire: Characterization of challenging experiences with psilocybin mushrooms.

Science.gov (United States)

Barrett, Frederick S; Bradstreet, Matthew P; Leoutsakos, Jeannie-Marie S; Johnson, Matthew W; Griffiths, Roland R

2016-12-01

Acute adverse psychological reactions to classic hallucinogens ("bad trips" or "challenging experiences"), while usually benign with proper screening, preparation, and support in controlled settings, remain a safety concern in uncontrolled settings (such as illicit use contexts). Anecdotal and case reports suggest potential adverse acute symptoms including affective (panic, depressed mood), cognitive (confusion, feelings of losing sanity), and somatic (nausea, heart palpitation) symptoms. Responses to items from several hallucinogen-sensitive questionnaires (Hallucinogen Rating Scale, the States of Consciousness Questionnaire, and the Five-Dimensional Altered States of Consciousness questionnaire) in an Internet survey of challenging experiences with the classic hallucinogen psilocybin were used to construct and validate a Challenging Experience Questionnaire. The stand-alone Challenging Experience Questionnaire was then validated in a separate sample. Seven Challenging Experience Questionnaire factors (grief, fear, death, insanity, isolation, physical distress, and paranoia) provide a phenomenological profile of challenging aspects of experiences with psilocybin. Factor scores were associated with difficulty, meaningfulness, spiritual significance, and change in well-being attributed to the challenging experiences. The factor structure did not differ based on gender or prior struggle with anxiety or depression. The Challenging Experience Questionnaire provides a basis for future investigation of predictors and outcomes of challenging experiences with classic hallucinogens. © The Author(s) 2016.

Psychometric evaluation of dietary habits questionnaire for type 2 diabetes mellitus

Science.gov (United States)

Sami, W.; Ansari, T.; Butt, N. S.; Hamid, M. R. Ab

2017-09-01

This research evaluated the psychometric properties of English version of dietary habits questionnaires developed for type 2 diabetic patients. There is scarcity of literature about availability of standardized questionnaires for assessing dietary habits of type 2 diabetics in Saudi Arabia. As dietary habits vary from country to country, therefore, this was an attempt to develop questionnaires that can serve as a baseline. Through intensive literature review, four questionnaires were developed / modified and subsequently tested for psychometric properties. Prior to pilot study, a pre-test was conducted to evaluate the face validity and content validity. The pilot study was conducted from 23 October - 22 November, 2016 to evaluate the questionnaires’ reliability and validity. Systematic random sampling technique was used to collect the data from 132 patients by direct investigation method. Questionnaires assessing diabetes mellitus knowledge (0.891), dietary knowledge (0.869), dietary attitude (0.841) and dietary practices (0.874) had good internal consistency reliability. Factor analysis conducted on dietary attitude questionnaire showed a valid 5 factor solution. Directions of loadings were positive and free from factorial complexity. Relying on the data obtained from type 2 diabetics, these questionnaires can be considered as reliable and valid for the assessment of dietary habits in Saudi Arabia and neighbouring Gulf countries population.

Measuring presenteeism: which questionnaire to use in physical activity research?

Science.gov (United States)

Brown, Helen Elizabeth; Burton, Nicola; Gilson, Nicholas David; Brown, Wendy

2014-02-01

An emerging area of interest in workplace health is presenteeism; the measurable extent to which physical or psychosocial symptoms, conditions and disease adversely affect the work productivity of those who choose to remain at work. Given established links between presenteeism and health, and health and physical activity, presenteeism could be an important outcome in workplace physical activity research. This study provides a narrative review of questionnaires for use in such research. Eight self-report measures of presenteeism were identified. Information regarding development, constructs measured and psychometric properties was extracted from relevant articles. Questionnaires were largely self-administered, had 4-44 items, and recall periods ranging from 1 week to 1 year. Items were identified as assessing work performance, physical tolerance, psychological well-being and social or role functioning. Samples used to test questionnaires were predominantly American male employees, with an age range of 30-59 years. All instruments had undergone psychometric assessment, most commonly discriminant and construct validity. Based on instrument characteristics, the range of conceptual foci covered and acceptable measurement properties, the Health and Work Questionnaire, Work Ability Index, and Work Limitations Questionnaire are suggested as most suitable for further exploring the relationship between physical activity and presenteeism.

Validation Study for the Brief Measure of Quality of Life and Quality of Care: A Questionnaire for the National Random Sampling Hospital Survey.

Science.gov (United States)

Shimizu, Megumi; Fujisawa, Daisuke; Kurihara, Miho; Sato, Kazuki; Morita, Tatsuya; Kato, Masashi; Miyashita, Mitsunori

2017-08-01

To monitor quality of life (QOL) for patients with cancer in a large population-based survey, we developed a short QOL and quality-of-care (QOC) questionnaire. To determine the validity and reliability of this new questionnaire for evaluating QOL in patients with cancer. Outpatients and inpatients at National Cancer Center Hospital East were administered a questionnaire, including the following items-the short QOL and QOC questionnaire (physical distress, pain, emotional distress, walk burden, and need for help with self-care; perceived general health status; and satisfaction with medical care and treatment by doctor, communication with doctor, support by health-care staff other than doctor, care for physical symptoms such as pain, and psychological care), the Functional Assessment of Cancer Therapy-General (FACT-G), the Cancer Care Evaluation Scale (CCES) for patients, and demographic and medical data. We then readministered the short QOL and QOC questionnaire. In total, 329 outpatients and 239 inpatients completed the survey (response rates: 80% and 90%, respectively). Total Cronbach α for the short QOL and QOC questionnaire was 0.83 for outpatients and 0.82 for inpatients. Items of the questionnaire correlated with cancer-specific measurements, FACT-G, and CCES. Intraclass correlation coefficients for all items of the questionnaire were 0.79 and 0.89 in each setting. Items of QOL and QOC did not correlate with each other. The validity and reliability of the short QOL and QOC questionnaire appear sufficient. This questionnaire enables continuous monitoring of patient QOL in large population-based surveys.

Use of alkaline or enzymatic sample pretreatment prior to characterization of gold nanoparticles in animal tissue by single-particle ICPMS

DEFF Research Database (Denmark)

Löschner, Katrin; Brabrand, Myung Suk Jung; Sloth, Jens Jørgen

2014-01-01

, not much is known about the applicability of spICPMS for determination of NPs in complex matrices such as biological tissues. In the present study, alkaline and enzymatic treatments were applied to solubilize spleen samples from rats, which had been administered 60-nm gold nanoparticles (Au......NPs) intravenously. The results showed that similar size distributions of AuNPs were obtained independent of the sample preparation method used. Furthermore, the quantitative results for AuNP mass concentration obtained with spICPMS following alkaline sample pretreatment coincided with results for total gold...... concentration obtained by conventional ICPMS analysis of acid-digested tissue. The recovery of AuNPs from enzymatically digested tissue, however, was approximately four times lower. Spiking experiments of blank spleen samples with AuNPs showed that the lower recovery was caused by an inferior transport...

Validity and reliability of the effort-reward imbalance questionnaire in a sample of 673 Italian teachers.

Science.gov (United States)

Zurlo, Maria Clelia; Pes, Daniela; Siegrist, Johannes

2010-08-01

This study explores the explicative potential of effort-reward imbalance Model to unveil the dimensions involved in teacher stress process and analyses the psychometric characteristics of the Italian version of the ERI Questionnaire (Siegrist, J Occup Health Psychol 1:27-43, 1996) with respect to a homogeneous occupational group: Italian school teachers. The Italian version of the ERI Questionnaire was submitted to 673 teachers randomly drawn from a cross-section of school types. Internal consistency, reliability, discriminative validity, and factorial structure were evaluated. Predictive validity was explored with respect to a measure of perceived strain, the Crown-Crisp Experiential Index. Discriminative validity was explored with respect to age, gender, education, type of school, the presence/absence of physical pains in the last 12 months before the survey, and teachers' intention to leave the profession. Item-total correlations are for all items included between 0.30 and 0.80 (p teachers, which reported to suffer for physical pains. Higher efforts (T = -5.26, p teachers inclined to give up the job. Multiple regression analyses have highlighted that higher efforts, higher overcommitment, and lower rewards are significantly predictive of higher levels of free-floating and somatic anxiety as well as depression and global psychological strain. This preliminary analysis of the reliability and validity of the Italian version of the ERI Questionnaire reveals that it constitutes a useful and reliable measure to analyse work-related stress with respect to the school setting. The validity of the ERI model to describe the dimensions involved in teacher's stress and to highlight those associated to leaving intentions and to several physical and psychological strain outcomes in Italian school teachers has been confirmed.

Factor Structure and Validation of the Dimensional Assessment of Personality Questionnaire (DAPQ

Directory of Open Access Journals (Sweden)

Dino Krupić

2015-12-01

Full Text Available The last decade was extremely dynamic in the field of personality disorder. The extensive research has resulted with significant changes in conceptualization and assessment of personality psychopathology. DSM 5 has introduced a hybrid diagnostic model of personality disorders, which leads toward implementing dimensional instead of categorical approach to personality disorders. There are many questionnaires aimed to measure dimensions of personality psychopathology. However, they contain a large number of items, which may present a methodological problem in conducting research on large samples. Hence, the aim of this study is to present development of a short questionnaire aimed to measure main dimensions of personality psychopathology. The questionnaire, named Dimensional Assessment of Personality Traits Questionnaire (DAPTQ, contains 62 items distributed into 5 main scales; Negative Emotionality, Detachment, Compulsivity, Psychoticism and Antagonism, and two additional scales Grandiosity and Attention Seeking. Study was conducted on the sample of 456 high school students from Osijek and Koprivnica. The DAPTQ, YPI, LEXI - 70 and Ryff Scales of Psychological Well-Being were administered. Results indicate good psychometric properties, namely content, construct and convergent validity and reliability, of all scales of the DAPTQ. This paper discusses some measurement issues concerning personality psychopathology in adolescents' population and the ways in which they could be overcome.

Validation of a Spanish Questionnaire on Mobile Phone Abuse

Directory of Open Access Journals (Sweden)

María A. Olivencia-Carrión

2018-04-01

Full Text Available Mobile phone addiction has attracted much attention recently and is showing similarity to other substance use disorders. Because no studies on mobile phone addiction had yet been conducted in Spain, we developed and validated a questionnaire (Cuestionario de Abuso del Teléfono Móvil, ATeMo to measure mobile phone abuse among young adults in Spanish. The ATeMo questionnaire was designed based on relevant DSM-5 diagnostic criteria and included craving as a diagnostic symptom. Using stratified sampling, the ATeMo questionnaire was administered to 856 students (mean age 21, 62% women. The MULTICAGE questionnaire was administered to assess history of drug abuse and addiction. Using confirmatory factor analysis, we found evidence for the construct validity of the following factors: Craving, Loss of Control, Negative Life Consequences, and Withdrawal Syndrome, and their association with a second order factor related to mobile phone abuse. The four ATeMO factors were also associated with alcoholism, internet use, and compulsive buying. Important gender differences were found that should be considered when studying mobile phone addictions. The ATeMo is a valid and reliable instrument that can be used in further research on mobile phone abuse.

Validation of a Spanish Questionnaire on Mobile Phone Abuse.

Science.gov (United States)

Olivencia-Carrión, María A; Ramírez-Uclés, Isabel; Holgado-Tello, Pablo; López-Torrecillas, Francisca

2018-01-01

Mobile phone addiction has attracted much attention recently and is showing similarity to other substance use disorders. Because no studies on mobile phone addiction had yet been conducted in Spain, we developed and validated a questionnaire (Cuestionario de Abuso del Teléfono Móvil, ATeMo) to measure mobile phone abuse among young adults in Spanish. The ATeMo questionnaire was designed based on relevant DSM-5 diagnostic criteria and included craving as a diagnostic symptom. Using stratified sampling, the ATeMo questionnaire was administered to 856 students (mean age 21, 62% women). The MULTICAGE questionnaire was administered to assess history of drug abuse and addiction. Using confirmatory factor analysis, we found evidence for the construct validity of the following factors: Craving, Loss of Control, Negative Life Consequences, and Withdrawal Syndrome, and their association with a second order factor related to mobile phone abuse. The four ATeMO factors were also associated with alcoholism, internet use, and compulsive buying. Important gender differences were found that should be considered when studying mobile phone addictions. The ATeMo is a valid and reliable instrument that can be used in further research on mobile phone abuse.

Validation of a Spanish Questionnaire on Mobile Phone Abuse

Science.gov (United States)

Olivencia-Carrión, María A.; Ramírez-Uclés, Isabel; Holgado-Tello, Pablo; López-Torrecillas, Francisca

2018-01-01

Mobile phone addiction has attracted much attention recently and is showing similarity to other substance use disorders. Because no studies on mobile phone addiction had yet been conducted in Spain, we developed and validated a questionnaire (Cuestionario de Abuso del Teléfono Móvil, ATeMo) to measure mobile phone abuse among young adults in Spanish. The ATeMo questionnaire was designed based on relevant DSM-5 diagnostic criteria and included craving as a diagnostic symptom. Using stratified sampling, the ATeMo questionnaire was administered to 856 students (mean age 21, 62% women). The MULTICAGE questionnaire was administered to assess history of drug abuse and addiction. Using confirmatory factor analysis, we found evidence for the construct validity of the following factors: Craving, Loss of Control, Negative Life Consequences, and Withdrawal Syndrome, and their association with a second order factor related to mobile phone abuse. The four ATeMO factors were also associated with alcoholism, internet use, and compulsive buying. Important gender differences were found that should be considered when studying mobile phone addictions. The ATeMo is a valid and reliable instrument that can be used in further research on mobile phone abuse. PMID:29760674

Psychometric properties of the Questionnaire for Secondary Traumatization

Directory of Open Access Journals (Sweden)

Katharina Weitkamp

2014-01-01

Full Text Available Background: During the past several years, there has been a growing interest in the negative effects that providing therapy may have on therapists. Of special interest is a phenomenon called secondary traumatization, which can arise while working with traumatized clients. To develop a simple screening tool for secondary traumatization, a quantitative assessment instrument was constructed using a data-driven approach based on qualitative interviews with affected trauma therapists as well as experienced supervisors in trauma therapy. Objective: The aim of the current study was to analyze the psychometric properties of the newly developed Questionnaire for Secondary Traumatization (FST acute and lifetime version and to determine the most appropriate scoring procedure. Method: To this end, three independent samples of psychotherapists (n=371, trauma therapists in training (n=80, and refugee counselors (n=197 filled out an online questionnaire battery. Data structure was analyzed using factor analyses, cluster analyses, and reliability analyses. Results: Factor analyses yielded a six-factor structure for both the acute and the lifetime version with only a small number of items loading on differing factors. Cluster analyses suggested a single scale structure of the questionnaire. The FST total score showed good internal consistencies across all three samples, while internal consistency of the six extracted factors was mixed. Conclusion: With the FST, a reliable screening instrument for acute and lifetime secondary traumatization is now available which is free of charge and yields a sum score for quick evaluation. The six-factor structure needs to be verified with confirmatory factor analyses.

Behavioral Assessment: Questionnaires.

Science.gov (United States)

Wilson, C. Chrisman

1980-01-01

This is a general discussion of the validity, reliability, function, and format of questionnaires designed to measure problem behavior, noncompliance, anxiety, social interaction, hyperactivity, drug use, and sexual behavior. Commonly used questionnaires are cited. (CP)

Diabetes Fear of Injecting and Self-Testing Questionnaire

DEFF Research Database (Denmark)

Mollema, E D; Snoek, Frank J; Pouwer, F

2000-01-01

OBJECTIVE: To study the psychometric properties of the Diabetes Fear of Injecting and Self-Testing Questionnaire (D-FISQ). RESEARCH DESIGN AND METHODS: Two groups of patients were studied. Sample A consisted of 252 insulin-treated diabetes patients. Sample B incorporated 24 insulin-treated patients......-injecting or self-testing had higher scores on FSI (P = 0.095) and FST (P = 0.01). EFA yielded 2 separate factors, FSI and FST. CONCLUSIONS: Results from this study support reliability and validity of the D-FISQ, a self-report instrument that can be used for both clinical and research purposes....

Development and Validation of the Bicultural Youth Acculturation Questionnaire.

Science.gov (United States)

Kukaswadia, Atif; Janssen, Ian; Pickett, William; Bajwa, Jasmine; Georgiades, Katholiki; Lalonde, Richard N; Quon, Elizabeth C; Safdar, Saba; Pike, Ian

2016-01-01

Acculturation is a multidimensional process involving changes in behaviour and beliefs. Questionnaires developed to measure acculturation are typically designed for specific ethnic populations and adult experiences. This study developed a questionnaire that measures acculturation among ethnically diverse populations of youth that can be included as a module in population surveys. Questionnaires measuring acculturation in youth were identified in the literature. The importance of items from the existing questionnaires was determined using a Delphi process and this informed the development of our questionnaire. The questionnaire was then pilot tested using a sample of 248 Canadians aged 18-25 via an online system. Participants identified as East and South East Asian (27.8%), South Asian (17.7%) and Black (13.7%). The majority were 1st (33.5%) or 2nd generation immigrants (52.0%). After redundant items were eliminated, exploratory factor analysis grouped items into domains, and, for each domain, internal consistency, and convergent validity with immigrant generation then age at immigration estimated. A subset of participants re-completed the questionnaire for reliability estimation. The literature review yielded 117 articles that used 13 questionnaires with a total of 440 questions. The Delphi process reduced these to 32 questions. Pilot testing occurred in 248 Canadians aged 18-25. Following item reduction, 16 questions in three domains remained: dominant culture, heritage language, and heritage culture. All had good internal consistency (Cronbach's alphas > .75). The mean dominant domain score increased with immigrant generation (1st generation: 3.69 (95% CI: 3.49-3.89), 2nd: 4.13 (4.00-4.26), 3rd: 4.40 (4.19-4.61)), and mean heritage language score was higher among those who immigrated after age 12 than before (p = .0001), indicative of convergent validity. This Bicultural Youth Acculturation Questionnaire has demonstrated validity. It can be incorporated into

Development and Validation of the Bicultural Youth Acculturation Questionnaire

Science.gov (United States)

Kukaswadia, Atif; Janssen, Ian; Pickett, William; Bajwa, Jasmine; Georgiades, Katholiki; Lalonde, Richard N.; Quon, Elizabeth C.; Safdar, Saba; Pike, Ian

2016-01-01

Objectives Acculturation is a multidimensional process involving changes in behaviour and beliefs. Questionnaires developed to measure acculturation are typically designed for specific ethnic populations and adult experiences. This study developed a questionnaire that measures acculturation among ethnically diverse populations of youth that can be included as a module in population surveys. Methods Questionnaires measuring acculturation in youth were identified in the literature. The importance of items from the existing questionnaires was determined using a Delphi process and this informed the development of our questionnaire. The questionnaire was then pilot tested using a sample of 248 Canadians aged 18–25 via an online system. Participants identified as East and South East Asian (27.8%), South Asian (17.7%) and Black (13.7%). The majority were 1st (33.5%) or 2nd generation immigrants (52.0%). After redundant items were eliminated, exploratory factor analysis grouped items into domains, and, for each domain, internal consistency, and convergent validity with immigrant generation then age at immigration estimated. A subset of participants re-completed the questionnaire for reliability estimation. Results The literature review yielded 117 articles that used 13 questionnaires with a total of 440 questions. The Delphi process reduced these to 32 questions. Pilot testing occurred in 248 Canadians aged 18–25. Following item reduction, 16 questions in three domains remained: dominant culture, heritage language, and heritage culture. All had good internal consistency (Cronbach’s alphas > .75). The mean dominant domain score increased with immigrant generation (1st generation: 3.69 (95% CI: 3.49–3.89), 2nd: 4.13 (4.00–4.26), 3rd: 4.40 (4.19–4.61)), and mean heritage language score was higher among those who immigrated after age 12 than before (p = .0001), indicative of convergent validity. Conclusions This Bicultural Youth Acculturation Questionnaire has

Assessing obstetric patient experience: a SERVQUAL questionnaire.

Science.gov (United States)

Garrard, Francesca; Narayan, Harini

2013-01-01

Across health services, there is a drive to respond to patient feedback and to incorporate their views into service improvement. The SERVQUAL method has been used in several clinical settings to quantify whether services meet patient expectations. However, work has been limited in the obstetric population. This paper seeks to address these issues. This study used an adapted SERVQUAL questionnaire to assess a reconfigured antenatal clinic service. The most important care aspects, as rated by patients, were used to construct the SERVQUAL questions. The questionnaire was administered to eligible women in two parts. The first was completed before their first hospital antenatal appointment and the second either at home (a postal-chasing exercise) or while waiting for their next appointment. Only fully completed questionnaires (both parts) were analysed. Service strengths included staff politeness, patient respect and privacy. Areas for improvement included hand cleanliness, women's involvement in decision making and communicating risk. However, the low variability in patient responses makes concrete conclusions difficult and methodological issues complicate evaluating hand cleanliness. The new antenatal clinic service received low negative weighted and un-weighted overall scores. The SERVQUAL measure was developed from patient feedback and used to further improve services. The SERVQUAL-based measure allowed an internal evaluation of patient experience and highlighted areas for improvement. However, without validation, the questionnaire cannot be used as an outcome measure and variation between published SERVQUAL questionnaires makes comparisons difficult. This highlights an important balance in patient evaluation measures--between locally responsive and externally comparable. The SERVQUAL approach allows healthcare teams to evaluate patient experience, while accounting for variation in their expectations and priorities. The study highlights several areas that are

Dimensional Assessment of Anxiety in Puerto Rican Patients: Evaluating Applicability of Psychological Questionnaires.

Science.gov (United States)

González-Barrios, Polaris; Morales-Rodríguez, Carlos M; Merced-Morales, Kritzianel; Lampón, Anabelle; González, Rafael; Martínez, Karen

2016-09-01

A dimensional assessment model as a supplement to the diagnosis process could overcome the current pitfalls in classifying psychopathology in ethnic minorities. The aim of the study described herein was to examine a sample of Puerto Rican patients diagnosed with anxiety disorder in order to evaluate the psychometric properties of the specific scales that assess the following 3 domains: clinical symptoms, personality/trait, and affective style. 80 subjects were recruited and interviewed using the Structured Clinical Interview for DSM-IV to identify the presence of anxiety disorders. Following this, various questionnaires assessing each proposed domain were administered to the participants. Reliability and validity of these questionnaires were examined using Cronbach's alpha and exploratory factor analysis. The effect of the individual items of the questionnaires on the overall reliability and validity was assessed using factor scores component matrix. Analyses revealed moderate to high reliability and validity scores within all 3 domains. The sample obtained moderate to high scores on the scales comprising clinical and personality/trait domains. The use of self-report scales in accordance with the proposed dimensional framework may be an effective way to supplement categorical diagnoses within the Hispanic population represented by this sample.

Psychiatrists' attitudes to multiple personality disorder: a questionnaire study.

Science.gov (United States)

Mai, F M

1995-04-01

To assess the attitudes of a random sample of Canadian psychiatrists to Multiple Personality Disorder (MPD) and assess the relative prevalence of the condition in three comparable cities in Ontario. A questionnaire was sent to all psychiatrists who were members of the Canadian Psychiatric Association and who were resident in Ottawa, Kingston and London. Questions were asked on the respondent's personal clinical experience of MPD and his/her attitude to this condition. Some personal and demographic questions were also included. 180 out of 294 questionnaires (61.2%) were returned. The existence of MPD was doubted by 27.8% of psychiatrists who responded to the questionnaire, with a significantly higher proportion in London than in Kingston or in Ottawa. A substantial majority in all three cities agreed that media publicity and the psychiatrist's own belief system affected the prevalence of MPD. These results confirm that there is a split in the profession regarding belief in the existence of MPD as a diagnosis.

Sample registration software for process automation in the Neutron Activation Analysis (NAA) Facility in Malaysia nuclear agency

Energy Technology Data Exchange (ETDEWEB)

Rahman, Nur Aira Abd, E-mail: nur-aira@nuclearmalaysia.gov.my; Yussup, Nolida; Ibrahim, Maslina Bt. Mohd; Mokhtar, Mukhlis B.; Soh Shaari, Syirrazie Bin Che; Azman, Azraf B. [Technical Support Division, Malaysian Nuclear Agency, 43000, Kajang, Selangor (Malaysia); Salim, Nazaratul Ashifa Bt. Abdullah [Division of Waste and Environmental Technology, Malaysian Nuclear Agency, 43000, Kajang, Selangor (Malaysia); Ismail, Nadiah Binti [Fakulti Kejuruteraan Elektrik, UiTM Pulau Pinang, 13500 Permatang Pauh, Pulau Pinang (Malaysia)

2015-04-29

Neutron Activation Analysis (NAA) had been established in Nuclear Malaysia since 1980s. Most of the procedures established were done manually including sample registration. The samples were recorded manually in a logbook and given ID number. Then all samples, standards, SRM and blank were recorded on the irradiation vial and several forms prior to irradiation. These manual procedures carried out by the NAA laboratory personnel were time consuming and not efficient. Sample registration software is developed as part of IAEA/CRP project on ‘Development of Process Automation in the Neutron Activation Analysis (NAA) Facility in Malaysia Nuclear Agency (RC17399)’. The objective of the project is to create a pc-based data entry software during sample preparation stage. This is an effective method to replace redundant manual data entries that needs to be completed by laboratory personnel. The software developed will automatically generate sample code for each sample in one batch, create printable registration forms for administration purpose, and store selected parameters that will be passed to sample analysis program. The software is developed by using National Instruments Labview 8.6.

Sample registration software for process automation in the Neutron Activation Analysis (NAA) Facility in Malaysia nuclear agency

Science.gov (United States)

Rahman, Nur Aira Abd; Yussup, Nolida; Salim, Nazaratul Ashifa Bt. Abdullah; Ibrahim, Maslina Bt. Mohd; Mokhtar, Mukhlis B.; Soh@Shaari, Syirrazie Bin Che; Azman, Azraf B.; Ismail, Nadiah Binti

2015-04-01

Neutron Activation Analysis (NAA) had been established in Nuclear Malaysia since 1980s. Most of the procedures established were done manually including sample registration. The samples were recorded manually in a logbook and given ID number. Then all samples, standards, SRM and blank were recorded on the irradiation vial and several forms prior to irradiation. These manual procedures carried out by the NAA laboratory personnel were time consuming and not efficient. Sample registration software is developed as part of IAEA/CRP project on `Development of Process Automation in the Neutron Activation Analysis (NAA) Facility in Malaysia Nuclear Agency (RC17399)'. The objective of the project is to create a pc-based data entry software during sample preparation stage. This is an effective method to replace redundant manual data entries that needs to be completed by laboratory personnel. The software developed will automatically generate sample code for each sample in one batch, create printable registration forms for administration purpose, and store selected parameters that will be passed to sample analysis program. The software is developed by using National Instruments Labview 8.6.

The Development and Preliminary Validation of a Brief Questionnaire of Psychopathic Personality Traits

Directory of Open Access Journals (Sweden)

Sonja Etzler

2017-09-01

Full Text Available The measurement of psychopathic personality traits via self-report has become an important tool in legal psychology. One prominent instrument is the Psychopathic Personality Inventory (PPI; Lilienfeld and Andrews, 1996, a well-validated questionnaire that is widely applied in many countries. In Germany, it is the only questionnaire assessing psychopathic traits that is available from a publisher with a manual edited for easy administration. Nevertheless, the PPI shows certain shortcomings: the high number of 154 items makes it less economic, it was developed on a non-representative undergraduate sample, and studies revealed an inconsistent factor structure. To overcome these points, a new questionnaire, the Questionnaire of Psychopathic Personality Traits [German: Fragebogen Psychopathischer Persönlichkeitseigenschaften (FPP] was developed. The sample consists of n = 132 civilians (56% female and n = 173 inmates of German correctional facilities (30% female. The FPP comprises 30 items, whose wording was short and adequate for inmates. It shows satisfying psychometric properties regarding factorial structure, item properties, and reliability. Partial invariance regarding both subsamples allows for interpretation of latent means. Results supported validity such as associations with self-reported crime, and inmates’ misconduct. The factorial structure was cross-validated on a second sample of N = 517 participants (71% female from an online study. The FPP is useful in large-scale research studies as well as for clinical settings, e.g., for treatment planning in correctional facilities.

Psychometric properties of sleep quality scale and sleep variables questionnaire in Turkish student sample

Directory of Open Access Journals (Sweden)

İsmail Önder

2016-09-01

Full Text Available Sleep is a physiological need that affects physical and mental performances. However, the number of individuals who experience problems DIRECTLY OR INDIRECTLY RELATED TO sleep is increasing in VARIOUS countries. Therefore, it is important to have a short, reliable and valid measure to assess both sleep quality and sleep related variables in school-age children. This study aims to carry out the validity and reliability studies for the Sleep Quality Scale and Sleep Variables Questionnaire (SQS-SVQ used to determine sleep quality, parental control, total sleep time, mid-point of sleep and sleep efficiency and to adapt it into Turkish. The SQS-SVQ consists of seven scale items to measure sleep quality and eight questionnaire items. The validity and reliability studies of the instrument were carried out on data acquired from 4th-8th graders. Factorial validity for SQS and criterion related validity analyses were carried out for the validity of the SQS-SVQ and correlations ranged from 0.51 to 0.73. These analysis results put forth that the scale is a valid measurement tool. Internal consistency coefficient of the SQS was 0.72 and test-retest correlations of the SQS-SVQ ranged from 0.67 to 0.88. These acquired results indicated that the scale WAS reliable. Meanwhile, gender measurement invariance was tested for SQS and results indicated that gender measurement invariance was established. These results have shown that the SQS-SVQ can be used in social researches and especially in educational studies.

Towards Usable E-Health. A Systematic Review of Usability Questionnaires.

Science.gov (United States)

Sousa, Vanessa E C; Dunn Lopez, Karen

2017-05-10

The use of e-health can lead to several positive outcomes. However, the potential for e-health to improve healthcare is partially dependent on its ease of use. In order to determine the usability for any technology, rigorously developed and appropriate measures must be chosen. To identify psychometrically tested questionnaires that measure usability of e-health tools, and to appraise their generalizability, attributes coverage, and quality. We conducted a systematic review of studies that measured usability of e-health tools using four databases (Scopus, PubMed, CINAHL, and HAPI). Non-primary research, studies that did not report measures, studies with children or people with cognitive limitations, and studies about assistive devices or medical equipment were systematically excluded. Two authors independently extracted information including: questionnaire name, number of questions, scoring method, item generation, and psychometrics using a data extraction tool with pre-established categories and a quality appraisal scoring table. Using a broad search strategy, 5,558 potentially relevant papers were identified. After removing duplicates and applying exclusion criteria, 35 articles remained that used 15 unique questionnaires. From the 15 questionnaires, only 5 were general enough to be used across studies. Usability attributes covered by the questionnaires were: learnability (15), efficiency (12), and satisfaction (11). Memorability (1) was the least covered attribute. Quality appraisal showed that face/content (14) and construct (7) validity were the most frequent types of validity assessed. All questionnaires reported reliability measurement. Some questionnaires scored low in the quality appraisal for the following reasons: limited validity testing (7), small sample size (3), no reporting of user centeredness (9) or feasibility estimates of time, effort, and expense (7). Existing questionnaires provide a foundation for research on e-health usability. However

Use of alcohol and drugs among health professionals in Norway: a study using data from questionnaires and samples of oral fluid.

Science.gov (United States)

Edvardsen, Hilde Marie Erøy; Karinen, Ritva; Moan, Inger Synnøve; Oiestad, Elisabeth Leere; Christophersen, Asbjørg Solberg; Gjerde, Hallvard

2014-03-10

Working under the influence of drugs and/or alcohol may affect safety and job performance. However, the size of this possible problem among health professionals (HPs) is unknown. The aim of this study was threefold: (i) to analyze samples of oral fluid and self-reported data from questionnaires to investigate the prevalence of alcohol and drugs among a sample of HPs in Norway, (ii) to study self-reported absence from or impairment at work due to alcohol and/or drug use, and (iii) to examine whether such use and absence/impairment due to such use depend on socio-demographic variables.A total of 916 of the 933 invited HPs from hospitals and pharmacies participated in the study (participation rate = 98.2%), and 81.1% were women. Associations were analyzed in bi-variate cross tables with Chi-square statistics to assess statistical significance.Alcohol was not detected in any of the samples. Ethyl glucuronide, a specific alcohol metabolite, was found in 0.3% of the collected samples. Illicit drugs and medicinal drugs were identified in 0.6% and 7.3% of the samples, respectively. Both analytical results and self-reported use of alcohol and drugs during the past 12 months indicate that recent and past year alcohol and drug use was lower among HPs than among workers in other business areas in Norway, Europe and US. Nevertheless, several HPs reported absence from work due to alcohol (0.9%) and medicinal drug use (0.8%) during the past 12 months. A substantial part (16.7%) of the self-reported medicinal drug users reported absence from work because of use of medicinal drugs during the past 12 months, and more than 1/4 of those reported in-efficiency at work because of the use of medicinal drugs during the past 12 months. Reduced efficiency at work due to alcohol use during the past 12 months was reported by 12.2%.This sample of HPs seldom used illicit drugs, few had a high level of alcohol consumption, and few tested positive for medicinal drugs. Absence or hangover related

[Validation of a questionnaire to evaluate patient safety in clinical laboratories].

Science.gov (United States)

Giménez Marín, Ángeles; Rivas-Ruiz, Francisco

2012-01-01

The aim of this study was to prepare, pilot and validate a questionnaire to evaluate patient safety in the specific context of clinical laboratories. A specific questionnaire on patient safety in the laboratory, with 62 items grouped into six areas, was developed, taking into consideration the diverse human and laboratory contextual factors which may contribute to producing errors. A pilot study of 30 interviews was carried out, including validity and reliability analyses using principal components factor analysis and Cronbach's alpha. Subsequently, 240 questionnaires were sent to 21 hospitals, followed by a test-retest of 41 questionnaires with the definitive version. The sample analyzed was composed of 225 questionnaires (an overall response rate of 80%). Of the 62 items initially assessed, 17 were eliminated due to non-compliance with the criteria established before the principal components factor analysis was performed. For the 45 remaining items, 12 components were identified, with an cumulative variance of 69.5%. In seven of the 10 components with two or more items, Cronbach's alpha was higher than 0.7. The questionnaire items assessed in the test-retest were found to be stable. We present the first questionnaire with sufficiently proven validity and reliability for evaluating patient safety in the specific context of clinical laboratories. This questionnaire provides a useful instrument to perform a subsequent macrostudy of hospital clinical laboratories in Spain. The questionnaire can also be used to monitor and promote commitment to patient safety within the search for continuous quality improvement. Copyright © 2011 SESPAS. Published by Elsevier Espana. All rights reserved.

Portuguese Children's Sleep Habits Questionnaire -validation and cross-cultural comparison

Directory of Open Access Journals (Sweden)

Filipe Gloria Silva

2014-01-01

Full Text Available OBJECTIVE: To validate the Portuguese version of the Children's Sleep Habits Questionnaire (CSHQ-PT and compare it to the versions from other countries. METHODS: The questionnaire was previously adapted to the Portuguese language according to international guidelines. 500 questionnaires were delivered to the parents of a Portuguese community sample of children aged 2 to 10 years old. 370 (74% valid questionnaires were obtained, 55 children met exclusion criteria and 315 entered in the validation study. RESULTS: The CSHQ-PT internal consistency (Cronbach's α was 0.78 for the total scale and ranged from 0.44 to 0.74 for subscales. The test-retest reliability for subscales (Pearson's cor-relations, n=58 ranged from 0.59 to 0.85. Our data did not adjust to the original 8 domains structure in Confirmatory Factor Analysis but the Exploratory Factor Analysis extracted 5 factors that have correspondence to CSHQ subscales. CONCLUSION: The CSHQ-PT evidenced psychometric properties that are comparable to the versions from other countries and adequate for the screening of sleep disturbances in children from 2 to 10 years old.

A mathematics vocabulary questionnaire for use in the intermediate phase

Directory of Open Access Journals (Sweden)

Marthie van der Walt

2008-11-01

Full Text Available Teachers and psychologists need an instrument to assess learners' language proficiency in mathematics to enable them to plan and evaluate interventions and to facilitate best practice in mathematics classrooms. We describe the development of a mathematics vocabulary questionnaire to measure learners' language proficiency in mathematics in the intermediate phase. It covers all the steps from designing the preliminary questionnaire to standardising the final instrument. A sample of 1 103 Grades 4 to 7 Afrikaans-, English- and Tswana-speaking learners in North West Province completed the Mathematics Vocabulary questionnaire (Primary (MV(P, consisting of 12 items. We analysed the data by calculating discrimination values, performing a factor analysis, determining reliability coefficients, and investigating item bias by language, gender, and grade. We concluded that there was strong evidence of validity and reliability for the MV(P.

Development and Validation of the Drinking Motive Questionnaire Revised Short Form (DMQ-R SF)

Science.gov (United States)

Kuntsche, Emmanuel; Kuntsche, Sandra

2009-01-01

A short form of the Drinking Motive Questionnaire Revised (DMQ-R; Cooper, 1994) was developed, using different item selection strategies based on a national representative sample of 5,617 12- to 18-year-old students in Switzerland. To confirm the concurrent validity of the short-form questionnaire, or DMQ-R SF, data from a second national sample…

Food consumption of adolescents. A simplified questionnaire for evaluating cardiovascular risk

Directory of Open Access Journals (Sweden)

Chiara Vera Lucia

2001-01-01

Full Text Available OBJECTIVE: To develop a simplified questionnaire for self-evaluation by adolescents of foods associated with the risk of coronary diseases. METHODS: Frequency questionnaires about 80 foods were answered by representative samples of 256 adolescents aged 12 to 19 from Rio de Janeiro as part of the Nutrition and Health Research project. The dependent variable was the serum cholesterol predicting equation as influenced by diet, and the independent variables were the foods. The variables were normalized and, using Pearson's correlation coefficient, those with r>0.10 were selected for the regression model. The model was analyzed for sex, age, random sample, and total calories. Those food products that explained 85% of the cholesterol variation equation were present in the caloric model, and contained trans fatty acids were selected for the questionnaire. RESULTS: Sixty-five food products had a statistically significant correlation (P<0.001 with the dependent variable. The simplified questionnaire included 9 food products present in all tested models: steak or broiled meat, hamburger, full-fat cheese, French fries or potato chips, whole milk, pies or cakes, cookies, sausages, butter or margarine. The limit of the added food points for self-evaluation was 100, and over 120 points was considered excessive. CONCLUSION: The scores given to the food products and the criteria for the evaluation of the consumption limits enabled the adolescents to get to know and to balance their intake.

Validation of the King's Health Questionnaire for South Africa in ...

African Journals Online (AJOL)

Objective. To validate the King's Health Questionnaire for urinary incontinence in the local South African English, Afrikaans and isiXhosa female community. Design. A cohort analytical study. Setting and subjects. The study utilised a sample of convenience. Women with urinary incontinence attending the gynaecology clinic ...

A new questionnaire for measuring quality of life - the Stark QoL.

Science.gov (United States)

Hardt, Jochen

2015-10-26

The Stark questionnaire measures health-related quality of life (QoL) using pictures almost exclusively. It is supplemented by a minimum of words. It comprises a mental and a physical health component. A German sample of n = 500 subjects, age and gender stratified, filled out the Stark Qol questionnaire along with various other questionnaires via internet. The physical component shows good reliability (Cronbach's alpha = McDonalds Omega = greatest lower bound = .93), the mental component can be improved (Cronbach's alpha = .63, McDonalds Omega = .72, greatest lower bound = .77). Confirmatory factor analysis shows a good fit (Bentlers CFI = .97). Construct validity was proven. The Stark QoL is a promising new development in measuring QoL, it is a short and easy to apply questionnaire. Additionally, it is particularly promising for international research.

Test-retest reliability of the eating disorder examination-questionnaire (EDE-Q) in a college sample

OpenAIRE

Rose, Jennifer S; Vaewsorn, Adin; Rosselli-Navarra, Francine; Wilson, G Terence; Weissman, Ruth Striegel

2013-01-01

Background The Eating Disorder Examination-Questionnaire (EDE-Q), a widely used self-report instrument, is often used for measuring change in eating disorder symptoms over the course of treatment. However, limited data exist about test-retest reliability, particularly for men. The current study evaluated EDE-Q 7-day test-retest reliability in male (n = 47) and female (n = 44) undergraduate students together and separately by gender. Results Internal consistency was consistently higher for wom...

Psychometric properties and validation of Portuguese version of Ages & Stages Questionnaires (3rd edition): 9, 18 and 30 Questionnaires.

Science.gov (United States)

Lopes, Sónia; Graça, Patrícia; Teixeira, Salete; Serrano, Ana Maria; Squires, Jane

2015-09-01

The essential underlying foundations of Early Intervention (EI), in which parents/family play a critical role in their child's development, leads us to conclude that their contribution assessing early detection of problems is fundamental. The Ages & Stages Questionnaires (ASQ) is a standardized screening instrument that has been successfully studied in different countries and cultures. Translate and study the psychometrics proprieties of the Portuguese version of the 9, 18 and 30month questionnaires of the Ages and Stages Questionnaires, 3rd edition (ASQ-3). Cross-sectional study. Validity and reliability were studied in a sample of 234 parents of children within 9, 18 and 30months. The results indicated that the questionnaires had good internal consistency, strong agreement between observers and between observations with two weeks interval, and strong Pearson product-moment correlation coefficients between the overall and the total for each domain. The cutoff points (i.e. 2 standard deviations below the mean domain score), that identifies children who should receive further referral for more comprehensive assessment, were close to those determined in the original ASQ-3 psychometric studies. Cronbach's alpha ranging from .42 to .70 and Pearson's r values varies from .22 to .60. Although some weaknesses were noted in psychometric qualities analysis, it can be concluded that the ASQ-PT of 9, 18 and 30months of age fulfills the requirements of a screening tool validated for the Portuguese population. To allow the early identification of children with developmental problems. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Screening of IAEA environmental samples for fissile material content

International Nuclear Information System (INIS)

Hembree, Doyle M. Jr.; Carter, Joel A.; Devault, Gerald L.; Whitaker, J. Michael; Glasgow, David

2001-01-01

neutrons' because they are emitted after a brief decay period following irradiation. Counting these delayed neutrons provides a simple method for determining the total fissile content in the sample. Neutron activation analysis is a nuclear technique, which means that the chemical bonding environment of a fissile atom has no effect on the measurement process. Therefore, NAA is virtually immune to the 'matrix' effects that complicate other methods. As a result, environmental samples such as pine needles, water, soil, sediments, or swipes can all be rapidly analyzed with little or no sample preparation. All of the sources of error in the NAA-delayed neutron counting experiment are known and can be accounted for. In addition, the method is nondestructive and does not require the use of a blank measurement. The neutrons counted as a result of 239 Pu fission cannot be easily discriminated from those arising from 235 U. Therefore, the delayed neutron method proposed for sample screening will provide total fissile content; not the quantities of individual radionuclides. However, for most IAEA samples, it can be assumed that uranium is the predominant fissile material, and the method can be usefully employed for screening using this assumption (data collected from a large number of environmental samples supports this contention). The method is fast (∼5 minutes per sample), very sensitive (3-10 pg 235 U), and very accurate. An initial assessment of the NAA method was conducted using 35 swipe samples. The uranium results using thermal ionization mass spectrometry (TIMS) ranged from less than blank values to 332 ng/sample. The comparison of results between TIMS and NAA was quite favorable; the average percent difference between the two methods for the 35 samples was less than 5%. The accuracy, large dynamic range, speed, and low cost of the NAA-DN technique make the method an excellent choice for properly screening environmental samples. (author)

ADAPTING A PARENT-COMPLETED, SOCIOEMOTIONAL QUESTIONNAIRE IN CHINA: THE AGES & STAGES QUESTIONNAIRES: SOCIAL-EMOTIONAL.

Science.gov (United States)

Bian, Xiaoyan; Xie, Huichao; Squires, Jane; Chen, Chieh-Yu

2017-03-01

The Ages & Stages Questionnaire: Social-Emotional (ASQ:SE; Squires, Bricker, & Twombly, 2002a), developed in the United States, was translated and adapted for use in China. Lack of valid and reliable instruments for identifying social and emotional delays in young children is a worldwide issue. Professionals in China have recently focused efforts on developing methods for early identification of social, emotional, and behavioral issues in the birth-to-5 population. Following the guidelines of the International Test Commission, the ASQ:SE was translated into Simplified Chinese (ASQ:SE-C) to collect a normative sample of 2,528 children across China. Data were analyzed to evaluate the psychometric properties of the ASQ:SE-C, using both classical test theory and item response theory, including generating cutoff points appropriate for the Chinese sample. A panel of Chinese experts was surveyed to assess face validity and estimated utility of the newly adapted tool. Discussions of research findings and implications for future studies are provided. © 2017 Michigan Association for Infant Mental Health.

Feasibility testing of smart tablet questionnaires compared to paper questionnaires in an amputee rehabilitation clinic.

Science.gov (United States)

Payne, Michael; Janzen, Shannon; Earl, Eric; Deathe, Barry; Viana, Ricardo

2017-08-01

Capturing the variability that exists among patients attending an amputee clinic using standardized paper-based questionnaires is time-consuming and may not be practical for routine clinical use. Electronic questionnaires are a potential solution; however, the benefits are dependent on the feasibility and acceptance of this mode of data collection among patients. To determine the feasibility and patient preference/comfort in using a tablet-based questionnaire for data collection in an outpatient amputee rehabilitation clinic compared to a traditional paper-based questionnaire. Observational study. In all, 48 patients with major extremity amputations completed both tablet and paper questionnaires related to their amputation and prosthetic use. Both trials were timed; patients then completed a semi-structured questionnaire about their experience. In all, 20.5% of patients needed hands-on assistance completing the paper questionnaire compared to 20.8% for the tablet. The majority of participants (52.1%) indicated a preference for the tablet questionnaire; 64.6% of patients felt the tablet collected a more complete and accurate representation of their status and needs. In all, 70.8% of participants described themselves as comfortable using the tablet. Despite comorbidities, patients with amputations demonstrated excellent acceptance of the electronic tablet-based questionnaire. Tablet questionnaires have significant potential advantages over paper questionnaires and should be further explored. Clinical relevance A custom electronic questionnaire was found to be beneficial for routine clinic use and was well received by patients in an amputee rehabilitation clinic. Development of such questionnaires can provide an efficient mechanism to collect meaningful data that can be used for individual patient care and program quality improvement initiatives.

Reassessment of the psychometric characteristics and factor structure of the 'Perceived Stress Questionnaire' (PSQ: analysis in a sample of dental students.

Directory of Open Access Journals (Sweden)

Jesús Montero-Marin

Full Text Available The training to become a dentist can create psychological distress. The present study evaluates the structure of the 'Perceived Stress Questionnaire' (PSQ, its internal consistency model and interrelatedness with burnout, anxiety, depression and resilience among dental students.The study employed a cross-sectional design. A sample of Spanish dental students (n = 314 completed the PSQ, the 'Goldberg Anxiety and Depression Scale' (GADS, 'Connor-Davidson Resilience Scale' (10-item CD-RISC and 'Maslach Burnout Inventory-Student Survey' (MBI-SS. The structure was estimated using Parallel Analysis from polychoric correlations. Unweighted Least Squares was the method for factor extraction, using the Item Response Theory to evaluate the discriminative power of items. Internal consistency was assessed by squaring the correlation between the latent true variable and the observed variable. The relationships between the PSQ and the other constructs were analysed using Spearman's coefficient.The results showed a PSQ structure through two sub-factors ('frustration' and 'tenseness' with regard to one general factor ('perceived stress'. Items that did not satisfy discriminative capacity were rejected. The model fit were acceptable (GFI = 0.98; RSMR = 0.06; AGFI = 0.98; NFI = 0.98; RFI = 0.98. All the factors showed adequate internal consistency as measured by the congeneric model (≥0.91. High and significant associations were observed between perceived stress and burnout, anxiety, depression and resilience.The PSQ showed a hierarchical bi-factor structure among Spanish dental students. Using the questionnaire as a uni-dimensional scale may be useful in perceived stress level discrimination, while the sub-factors could help us to refine perceived stress analysis and improve therapeutic processes.

Correlation between chronic arthritis patients confirmed with questionnaire and serologic test of Lyme disease

Science.gov (United States)

Rotan, H.; Ginting, Y.; Loesnihari, R.; Kembaren, T.; Marpaung, B.

2018-03-01

Lyme borreliosis is the most common tick-borne disease, and frequency of arthritis complication later. The objective of this study was to determine the seroprevalence of Lyme disease and to evaluate its correlation with chronic arthritis. This epidemiologic cross sectional study included 41 healthy individuals who had chronic arthritis and bitten by ticks underwent questionnaires, and laboratory tests consisted of a routine blood sample, serum uric acid, and IgG ELISA for Lyme. There was 7.32% presence of positive IgG for Lyme. Samples with positive IgG for Lyme were further evaluated for rheumatology marker. We found three samples with a positive rheumatoid factor, two samples had positive anti-MCV, and 1 sample had slightly increased CRP. Three Lyme positive samples had normal EULAR scoring. It was the first Lyme disease case found in Indonesia, particularly in 4 villages of Sibolangit, Deli Serdang, North Sumatera. The assessment made by analysis the questionnaire, evaluation the blood test, and confirmed positive Lyme disease, and at last, we found the correlation between chronic arthritis with positive test Lyme.

Quality assesment for the analysis of PCDDs/PCDFs in individual human serum samples

Energy Technology Data Exchange (ETDEWEB)

Perez, F [IIQAB-CSIC, Barcelona (Spain). Dept. of Ecotechnologies, Lab. of Dioxins; Abad, E; Llerena, J J; Caixach, J; Rivera, J

2004-09-15

The aim of this work was to optimise a relevant methodology for the ultratrace analysis of PCDDs/PCDFs in individual human serum samples. In order to carry out the study, different strategies including the elaboration of quality control samples, parallel sample analysis, control blanks and a number of quality assurance measures were implemented as analytical current practices. Some of the main drawbacks in the analysis of PCDDs/PCDFs in these kind of samples come from two conflicting aspects: the small sample size and the low levels expected to be found. Taking this into account, an unavoidable compromise between the sample amount and the minimum analytical requirements, mainly the detection limit (LOD), is mandatory. To reach this goal C{sub 18} solid phase extraction was used to remove the analytes from the matrix. Clean up was performed by solid-liquid adsorption chromatography using a variety of adsorbents. Instrumental analysis was achieved by high-resolution gas chromatography coupled to high-resolution mass spectrometry (HRGC/HRMS). Finally, the optimised methodology was applied to evaluate the potential impact in general population living in the surroundings of an obsolete municipal waste incinerator plant (MWI). Thus, more than 400 individuals serum samples potentially exposed to the emission of the incinerator and people not exposed were considered in this study.

Proposal for the award of two contracts for the supply of fine-blanked low-carbon steel yoke laminations and inserts for the cold masses of the LHC superconducting dipole magnets

CERN Document Server

1999-01-01

This document concerns the award of two contracts for the supply of 5 812 000 fine-blanked low-carbon steel yoke laminations, of two different types, and 5 800 000 inserts for the cold masses of the LHC superconducting dipole magnets. Following a market survey carried out among 70 firms in sixteen Member States and one firm in Japan, a call for tenders (IT-2467/LHC/LHC) was sent on 3 June 1999 to seven firms in four Member States. By the closing date, CERN had received five tenders. The Finance Committee is invited to agree to the negotiation of two contracts with: - FUG (DE) for the supply of 3 632 000 fine-blanked low-carbon steel yoke laminations and 3 625 000 inserts, which represents 5/8 of the total quantity required for the cold masses of the LHC superconducting dipole magnets, for a total amount of 2 525 563 euros, which at the exchange rate given in the tender correspond to 4 019 038 Swiss francs, subject to revision for contractual deliveries after 31 December 2001, with an option for the supply of ...

19 CFR 357.105 - Questionnaires.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Questionnaires. 357.105 Section 357.105 Customs... Questionnaires. For reviews conducted under section 106(b)(2), the Secretary normally will send questionnaires to potential producers/suppliers of the product to determine whether it is in short supply. Questionnaires...

Error orientation questionnaire (EOQ): reliability, validity, and different language equivalence

NARCIS (Netherlands)

Rybowiak, V.; Garst, H.; Frese, M.; Batinic, B.

1999-01-01

An Error Orientation Questionnaire (EOQ) was developed, consisting of eight scales on attitudes to and on coping with errors at work. In Study I (representative sample of a German city, N=478) six scales were developed with the help of a confirmatory factor analysis using LISREL techniques. They

Adapting Depression and Anxiety Questionnaire for Children into Turkish: Reliability and Validity Studies

Science.gov (United States)

Ay, Ismail; Secer, Ismail; Simsek, Mustafa Kerim

2017-01-01

Purpose of this study is to adapt anxiety and depression questionnaire for children into Turkish culture and to analyze the psychometric characteristics of it on clinical and nonclinical samples separately. The study is a descriptive survey research. The study was conducted on two different sample groups, clinical and nonclinical. The clinical…

Evaluation of the Pharmacy Safety Climate Questionnaire in European community pharmacies.

NARCIS (Netherlands)

Phipps, D.L.; Bie, J. de; Herborg, H.; Guerreiro, M.; Eickhoff, C.; Fernandes-Llimos, F.; Bouvy, M.L.; Rossing, C.; Mueller, U.; Ashcroft, D.M.

2012-01-01

Objective: To evaluate the internal reliability, factor structure and construct validity of the Pharmacy Safety Climate Questionnaire (PSCQ) when applied to a pan-European sample of community pharmacies. Design: A cross-sectional survey design was used. Setting: Community pharmacies in Denmark,

Percentile ranks and benchmark estimates of change for the Health Education Impact Questionnaire: Normative data from an Australian sample

Directory of Open Access Journals (Sweden)

Gerald R Elsworth

2017-03-01

Full Text Available Objective: Participant self-report data play an essential role in the evaluation of health education activities, programmes and policies. When questionnaire items do not have a clear mapping to a performance-based continuum, percentile norms are useful for communicating individual test results to users. Similarly, when assessing programme impact, the comparison of effect sizes for group differences or baseline to follow-up change with effect sizes observed in relevant normative data provides more directly useful information compared with statistical tests of mean differences and the evaluation of effect sizes for substantive significance using universal rule-of-thumb such as those for Cohen’s ‘d’. This article aims to assist managers, programme staff and clinicians of healthcare organisations who use the Health Education Impact Questionnaire interpret their results using percentile norms for individual baseline and follow-up scores together with group effect sizes for change across the duration of typical chronic disease self-management and support programme. Methods: Percentile norms for individual Health Education Impact Questionnaire scale scores and effect sizes for group change were calculated using freely available software for each of the eight Health Education Impact Questionnaire scales. Data used were archived responses of 2157 participants of chronic disease self-management programmes conducted by a wide range of organisations in Australia between July 2007 and March 2013. Results: Tables of percentile norms and three possible effect size benchmarks for baseline to follow-up change are provided together with two worked examples to assist interpretation. Conclusion: While the norms and benchmarks presented will be particularly relevant for Australian organisations and others using the English-language version of the Health Education Impact Questionnaire, they will also be useful for translated versions as a guide to the

SEAMIST trademark soil sampling for tritiated water: First year's results

International Nuclear Information System (INIS)

Mallon, B.; Martins, S.A.; Houpis, J.L.; Lowry, W.; Cremer, C.D.

1992-01-01

SEAMIST trademark is a recently developed sampling system that enables one to measure various soil parameters by means of an inverted, removable, impermeable membrane tube inserted in a borehole. This membrane tube can have various measuring devices installed on it, such as gas ports, adsorbent pads, and electrical sensors. These membrane tubes are made of a laminated polymer. The Lawrence Livermore National Laboratory in Livermore, California, has installed two of these systems to monitor tritium in soil resulting from a leak in an underground storage tank. One tube is equipped with gas ports to sample soil vapor and the other with adsorbent pads to sample soil moisture. Borehole stability was maintained using either sand-filled or air-inflated tubes. Both system implementations yielded concentrations or activities that compared well with the measured concentrations of tritium in the soil taken during borehole construction. In addition, an analysis of the data suggest that both systems prevented the vertical migration of tritium in the boreholes. Also, a neutron probe was successfully used in a blank membrane inserted in one of the boreholes to monitor the moisture in the soil without exposing the probe to the tritium. The neutron log showed excellent agreement with the soil moisture content measured in soil samples taken during borehole construction. This paper describes the two SEAMIST trademark systems used and presents sampling results and comparisons

French validation of the Barcelona Music Reward Questionnaire

Directory of Open Access Journals (Sweden)

Joe Saliba

2016-03-01

Full Text Available Background. The Barcelona Music Reward Questionnaire (BMRQ questionnaire investigates the main facets of music experience that could explain the variance observed in how people experience reward associated with music. Currently, only English and Spanish versions of this questionnaire are available. The objective of this study is to validate a French version of the BMRQ. Methods. The original BMRQ was translated and adapted into an international French version. The questionnaire was then administered through an online survey aimed at adults aged over 18 years who were fluent in French. Statistical analyses were performed and compared to the original English and Spanish version for validation purposes. Results. A total of 1,027 participants completed the questionnaire. Most responses were obtained from France (89.4%. Analyses revealed that congruence values between the rotated loading matrix and the ideal loading matrix ranged between 0.88 and 0.96. Factor reliabilities of subscales (i.e., Musical Seeking, Emotion Evocation, Mood Regulation, Social Reward and Sensory-Motor also ranged between 0.88 and 0.96. In addition, reliability of the overall factor score (i.e., Music reward was 0.91. Finally, the internal consistency of the overall scale was 0.85. The factorial structure obtained in the French translation was similar to that of the original Spanish and English samples. Conclusion. The French version of the BMRQ appears valid and reliable. Potential applications of the BMRQ include its use as a valuable tool in music reward and emotion research, whether in healthy individuals or in patients suffering from a wide variety of cognitive, neurologic and auditory disorders.

Mechanical Behaviour Investigation Of Aluminium Alloy Tailor Welded Blank Developed By Using Friction Stir Welding Technique

Science.gov (United States)

Dwi Anggono, Agus; Sugito, Bibit; Hariyanto, Agus; Subroto; Sarjito

2017-10-01

The objective on the research was to investigate the mechanical properties and microstructure of tailor welded blank (TWB) made from AA6061-T6 and AA1100 using friction stir welding (FSW) process. Due to the dissimilar mechanical properties of the two aluminium alloys, microhardness test was conducted to measure the hardness distribution across the weld nugget. The mixing of two distinct materials was influenced by tool rotation speed. Therefore, microstructure analysis was carried out to investigate the grain size and shape. The grain size of AA6061-T6 has increased in the heat affected zone (HAZ) while for AA1100 has decreased. In the weld nugget, it has found a hook defects in the dissimilar aluminium joining. By using monotonic tensile load, the different weld line direction was observed with the expansion in tool rotation. The joints failure were consistently on the area of AA1100 series. Furthermore, two specimens were investigated, one through the dissimilar aluminium and the other through similiar material. Inspection of the weld nugget hardness was shown that nonhomogen material intermixing during the stiring process as confirmed by microhardness measurement.

Development and validation of makeup and sexualized clothing questionnaires.

Science.gov (United States)

Smith, Haylie; Perez, Marisol; Sladek, Michael R; Becker, Carolyn Black; Ohrt, Tara K; Bruening, Amanda B

2017-01-01

Body acceptance programs on college campuses indicated that collegiate women often report feeling pressure to dress in a sexualized manner, and use makeup to enhance beauty. Currently, no quantitative measures exist to assess attitudes and daily behaviors that may arise in response to perceived pressure to wear makeup or dress in a provocative manner. The goal of the current studies was to develop brief self-report questionnaires aimed at assessing makeup and sexualized clothing use and attitudes in young women. An exploratory factor analysis in a sample of 403 undergraduate women was used in Study 1 to create items to measure the pressure women feel to wear makeup and sexualized clothing. A confirmatory factor analysis ( N  = 153) was used in Study 2 to confirm the factor structure found in Study 1. An incremental validity analysis was also conducted in Study 2. Across both studies, participants completed online questionnaires. In Study 1, items were developed for two questionnaires to assess perceived pressure to wear makeup and discomfort when not wearing makeup, and perceived pressure to wear sexualized clothing, and body image concerns with regards to sexualized clothing. The exploratory factor analyses revealed Unconfident and Unease scales for the Makeup Questionnaire (MUQ) and Body Dissatisfaction and Pressure scales for the Sexualized Clothing Questionnaire (SCQ). In Study 2, the confirmatory factor analyses confirmed the factor structure for the MUQ and SCQ. The incremental validity analysis revealed that these measures can be used to predict self-objectification and shape and weight concern in women. These studies provide preliminary support for the factor structure of two novel questionnaires aimed at assessing perceived pressure to wear makeup and sexualized clothing.

Beliefs about cervical cancer and Pap test: a new Chilean questionnaire.

Science.gov (United States)

Urrutia, Maria-Teresa; Hall, Rosemary

2013-06-01

The purpose of this study was to develop and validate a questionnaire to examine women's beliefs about cervical cancer and the Pap test in Chilean women. The questionnaire, developed following the guidelines by Robert de Vellis, is based on the Health Belief Model. The content validity index was 0.93 upon review by 10 Chilean experts. A cross-sectional design was implemented to validate the questionnaire. The sample included 333 women recruited from a women's healthcare center in Santiago, Chile. Exploratory factor analysis was used to evaluate validity and coefficient α to evaluate reliability. After six models were computed, the questionnaire was reduced from 53 to 28 items. The new questionnaire, CPC-28 (in Spanish, Creencias, Papanicolaou, Cancer -28), includes six domains: the barriers domain to take a Pap test, the cues to action domain, the severity domain, the need to have a Pap test domain, the susceptibility to cervical cancer domain, and the benefit domain. The unexpected salient factor "need to have a Pap test" was found as part of the susceptibility domain proposed in the initial questionnaire. This finding is an important topic for future research. The CPC-28 questionnaire explained 49% of the total variance, and the reliability was .735. It was concluded that the CPC-28 questionnaire will have important implications on research, education, and administration across disciplines. Nursing curricula and healthcare providers must stress the importance and reinforce the importance of prevention of cervical cancer and regular Pap test screenings. © 2013 Sigma Theta Tau International.

Patients' expectations of orthodontic treatment: part 1 - development of a questionnaire.

Science.gov (United States)

Sayers, M S; Newton, J T

2006-12-01

The development of a questionnaire to measure patients' and their parents' expectations before orthodontic treatment, and to test the reliability and validity of this measure. A two-stage methodology, with open-ended interviews to identify themes and concepts followed by development and testing of the questionnaire. GKT Orthodontic Department, King's College Dental Hospital. The sample consisted of 140 participants, 70 patients aged 12-14 years, who had been referred to the orthodontic department for treatment. One parent of each patient was also recruited. The study was in two phases. In the first phase 30 participants (15 new patients and their 15 parents) participated in open-ended interviews, which were analysed qualitatively. Information from these interviews was used to construct a questionnaire. During the second phase, the questionnaire was piloted on 10 participants, five new consecutive patients and their parents. The questionnaire was then distributed to 174 subjects (87 new patients and their 87 parents). Seventy-eight subjects (39 new patients and their 39 parents) completed the questionnaire before their orthodontic consultation. Another 96 subjects (48 new patients and their 48 parents) were invited to complete the questionnaire prior to and at their orthodontic consultation. Test-retest analysis was conducted on 22 participants (11 patients and their 11 parents), who completed the questionnaire previous to and at their orthodontic consultation, and contributed to the psychometric validation of this questionnaire. A questionnaire was devized using the key themes and concepts identified in the open-ended interviews. As a result, 10 questions, some with sub-questions were constructed using a visual analogue scale as the response format. The questionnaire developed had good face validity. Internal consistency of the questionnaire using Cronbach's alpha, produced an overall inter-item reliability > 0.7 along with item-total correlations > 0.3 in over 50

Parental authority questionnaire.

Science.gov (United States)

Buri, J R

1991-08-01

A questionnaire was developed for the purpose of measuring Baumrind's (1971) permissive, authoritarian, and authoritative parental authority prototypes. It consists of 30 items per parent and yields permissive, authoritarian, and authoritative scores for both the mother and the father; each of these scores is derived from the phenomenological appraisals of the parents' authority by their son or daughter. The results of several studies have supported the Parental Authority Questionnaire as a psychometrically sound and valid measure of Baumrind's parental authority prototypes, and they have suggested that this questionnaire has considerable potential as a valuable tool in the investigation of correlates of parental permissiveness, authoritarianism, and authoritativeness.

Development of a Measure of Sleep, Circadian Rhythms, and Mood: The SCRAM Questionnaire

Directory of Open Access Journals (Sweden)

Jamie E. M. Byrne

2017-12-01

Full Text Available Sleep quality, circadian phase, and mood are highly interdependent processes. Remarkably, there is currently no self-report questionnaire that measures all three of these clinically significant functions: The aim of this project was to address this deficit. In Study 1, 720 participants completed a set of potential items was generated from existing questionnaires in each of the three domains and refined to follow a single presentation format. Study 2 used an independent sample (N = 498 to interrogate the latent structure. Exploratory factor analysis was used to identify a parsimonious, three-factor latent structure. Following item reduction, the optimal representation of sleep quality, circadian phase, and mood was captured by a questionnaire with three 5-item scales: Depressed Mood, Morningness, and Good Sleep. Confirmatory factor analysis found the three-scale structure provided adequate fit. In both samples, Morningness and Good Sleep were positively associated, and each was negatively associated with the Depressed Mood scale. Further research is now required to quantify the convergent and discriminant validity of its three face-valid and structurally replicated scales. The new sleep, circadian rhythms, and mood (SCRAM questionnaire is the first instrument to conjointly measure sleep quality, circadian phase, and mood processes, and has significant potential as a clinical tool.

Cross-cultural adaptation of the CDC Worksite Health ScoreCard questionnaire into Portuguese

Directory of Open Access Journals (Sweden)

Patrícia Coelho de Soárez

2016-06-01

Full Text Available SUMMARY Objective: Despite the progress in the implementation of health promotion programs in the workplace, there are no questionnaires in Brazil to assess the scope of health promotion interventions adopted and their scientific basis. This study aimed to translate into Brazilian Portuguese and culturally adapt the CDC Worksite Health ScoreCard (HSC questionnaire. Method: The HSC has 100 questions grouped into twelve domains. The steps are as follows: translation, reconciliation, back-translation, review by expert panel, pretesting, and final revision. The convenience sample included 27 individuals from health insurance providers and companies of various sizes, types and industries in São Paulo. Data were analyzed using descriptive statistics. Results: The average age of the sample was 38 years, most of the subjects were female (21 of 27, and were responsible for programs to promote health in these workplaces. Most questions were above the minimum value of understanding set at 90%. The participants found the questionnaire very useful to determine the extent of existing health promotion programs and to pinpoint areas that could be developed. Conclusion: The Brazilian Portuguese version of the HSC questionnaire may be a valid measure and useful to assess the degree of implementation of health promotion interventions based on evidence in local health organizations.

Development and validation of the multidimensional vaginal penetration disorder questionnaire (MVPDQ) for assessment of lifelong vaginismus in a sample of Iranian women.

Science.gov (United States)

Molaeinezhad, Mitra; Roudsari, Robab Latifnejad; Yousefy, Alireza; Salehi, Mehrdad; Khoei, Effat Merghati

2014-04-01

Vaginismus is considered as one of the most common female psychosexual dysfunctions. Although the importance of using a multidisciplinary approach for assessment of vaginal penetration disorder is emphasized, the paucity of instruments for this purpose is clear. We designed a study to develop and investigate the psychometric properties of a multidimensional vaginal penetration disorder questionnaire (MVPDQ), thereby assisting specialists for clinical assessment of women with lifelong vaginismus (LLV). MVPDQ was developed using the findings from a thematic qualitative research conducted with 20 unconsummated couples from a former study, which was followed by an extensive literature review. Then, during a cross-sectional design, a consecutive sample of 214 women, who were diagnosed as LLV based on Diagnostic and Statistical Manual of Mental Disorders (DSM)-IV-TR criteria completed MVPDQ and additional questions regarding their demographic and sexual history. Validation measures and reliability were tested by exploratory factor analysis and Cronbach's alpha coefficient via Statistical Package for the Social Sciences (SPSS) version 16. After conducting exploratory factor analysis, MVPDQ emerged with 72 items and 9 dimensions: Catastrophic cognitions and tightening, helplessness, marital adjustment, hypervigilance, avoidance, penetration motivation, sexual information, genital incompatibility, and optimism. Subscales of MVPDQ showed a significant reliability that varied between 0.70 and 0.87 and results of test-retest were satisfactory. The present study shows that MVPDQ is a valid and reliable self-report questionnaire for clinical assessment of women complaining of LLV. This instrument may assist specialists to make a clinical judgment and plan appropriately for clinical management.

Development and validation of the multidimensional vaginal penetration disorder questionnaire (MVPDQ for assessment of lifelong vaginismus in a sample of Iranian women

Directory of Open Access Journals (Sweden)

Mitra Molaeinezhad

2014-01-01

Full Text Available Background: Vaginismus is considered as one of the most common female psychosexual dysfunctions. Although the importance of using a multidisciplinary approach for assessment of vaginal penetration disorder is emphasized, the paucity of instruments for this purpose is clear. We designed a study to develop and investigate the psychometric properties of a multidimensional vaginal penetration disorder questionnaire (MVPDQ, thereby assisting specialists for clinical assessment of women with lifelong vaginismus (LLV. Materials and Methods: MVPDQ was developed using the findings from a thematic qualitative research conducted with 20 unconsummated couples from a former study, which was followed by an extensive literature review. Then, during a cross-sectional design, a consecutive sample of 214 women, who were diagnosed as LLV based on Diagnostic and Statistical Manual of Mental Disorders (DSM-IV-TR criteria completed MVPDQ and additional questions regarding their demographic and sexual history. Validation measures and reliability were tested by exploratory factor analysis and Cronbach′s alpha coefficient via Statistical Package for the Social Sciences (SPSS version 16. Results: After conducting exploratory factor analysis, MVPDQ emerged with 72 items and 9 dimensions: Catastrophic cognitions and tightening, helplessness, marital adjustment, hypervigilance, avoidance, penetration motivation, sexual information, genital incompatibility, and optimism. Subscales of MVPDQ showed a significant reliability that varied between 0.70 and 0.87 and results of test-retest were satisfactory. Conclusion: The present study shows that MVPDQ is a valid and reliable self-report questionnaire for clinical assessment of women complaining of LLV. This instrument may assist specialists to make a clinical judgment and plan appropriately for clinical management.

Test-retest reliability of the driving habits questionnaire in older self-driving adults.

Science.gov (United States)

Song, Chiang-Soon; Chun, Byung-Yoon; Chung, Hyun-Sook

2015-11-01

[Purpose] The purpose of this study was to investigate the test-retest reliability of the Driving Habits Questionnaire in community-dwelling older self-drivers. [Subjects and Methods] Seventy-four participants were recruited by convenience sampling from local rehabilitation centers. This was a cross-sectional study design that used two clinical measures: the Driving Habits Questionnaire and Mini-mental State Examination. To examine the test-retest reliability of the Driving Habits Questionnaire, the clinical tool was measured twice, five days apart. [Results] The Driving Habits Questionnaire showed good reliability for older community-dwelling self-drivers. The Cronbach's alpha coefficients for the four domains of dependence (0.572), difficulty (0.871), crashes and citations (0.689), and driving space (0.961) of the Driving Habits Questionnaire indicated good or high internal consistency. Driving difficulty correlated significantly with self-reported crashes and citations and driving space. [Conclusion] The results of this study suggest that the Driving Habits Questionnaire is a reliable measure of self-reported interview-based driving behavior in the community-dwelling elderly.

Steroid radioimmunoassays

International Nuclear Information System (INIS)

Shinde, Y.; Hacker, R.R.; Ntunde, B.; Smith, V.G.

1981-01-01

An estrogen radioimmunoassay was used to study the problem of blanks in steroid assays. Negligible binding (1.5 percent) in the non-antibody tubes prevailed throughout the study. The assay was validated using accepted procedures. Both water and solvent blanks had estrogen concentrations of 7-9 pg/tube. However, neither water nor solvent blanks showed a dose-related response, indicating that they were 'real' blanks. Exogenous estradiol, when added to water and solvent in quantities less than the estimated blank, was not quantitatively recovered. However, exogenous estradiol added to the water solvent in quantities greater than the blank estimate was quantitatively recovered. The sensitivity of the reference standard curve was 6-10 pg/tube, approximately the same as the blank estimate. These results indicated that the estimates of water and solvent blanks were measures of the assay sensitivity. In such circumstances, it is suggested that blank estimates should not be subtracted from sample values. If the blank estimates are high, attention should be directed towards improving the sensitivity of the assay

Coloured Letters and Numbers (CLaN): A reliable factor-analysis based synaesthesia questionnaire

OpenAIRE

Rothen Nicolas; Tsakanikos Elias; Meier Beat; Ward Jamie

2013-01-01

Synaesthesia is a heterogeneous phenomenon even when considering one particular sub type. The purpose of this study was to design a reliable and valid questionnaire for grapheme colour synaesthesia that captures this heterogeneity. By the means of a large sample of 628 synaesthetes and a factor analysis we created the Coloured Letters and Numbers (CLaN) questionnaire with 16 items loading on 4 different factors (i.e. localisation automaticity/attention deliberate use and longitudinal changes)...

Validation of a disease-specific quality-of-life questionnaire in a large sample of Dutch achalasia patients

NARCIS (Netherlands)

Frankhuisen, R.; Heijkoop, R.; van Herwaarden, M. A.; de Vries, D. R.; Smout, A. J. P. M.; Baron, A.; Samsom, M.

2008-01-01

SUMMARY: The aim of this study was to validate a translated version of an achalasia-specific quality-of-life questionnaire (achalasia-DSQoL) by examining its psychometric properties in a Dutch cohort of achalasia patients. The achalasia-DSQoL was administered to 171 treated achalasia patients

Validation of a Food Frequency Questionnaire for Estimating Micronutrient Intakes in an Urban US Sample of Multi-Ethnic Pregnant Women.

Science.gov (United States)

Brunst, Kelly J; Kannan, Srimathi; Ni, Yu-Ming; Gennings, Chris; Ganguri, Harish B; Wright, Rosalind J

2016-02-01

To validate the Block98 food frequency questionnaire (FFQ) for estimating antioxidant, methyl-nutrient and polyunsaturated fatty acids (PUFA) intakes in a pregnant sample of ethnic/racial minority women in the United States (US). Participants (n = 42) were from the Programming of Intergenerational Stress Mechanisms study. Total micronutrient intakes from food and supplements was ascertained using the modified Block98 FFQ and two 24-h dietary recalls collected at random on nonconsecutive days subsequent to completion of the FFQ in mid-pregnancy. Correlation coefficients (r) corrected for attenuation from within-person variation in the recalls were calculated for antioxidants (n = 7), methyl-nutrients (n = 8), and PUFAs (n = 2). The sample was largely ethnic minorities (38 % Black, 33 % Hispanic) with 21 % being foreign born and 41 % having less than or equal to a high school degree. Significant and adequate deattenuated correlations (r ≥ 0.40) for total dietary intakes of antioxidants were observed for vitamin C, vitamin E, magnesium, and zinc. Reasonable deattenuated correlations were also observed for methyl-nutrient intakes of vitamin B6, betaine, iron, and n:6 PUFAs; however, they did not reach significance. Most women were classified into the same or adjacent quartiles (≥70 %) for total (dietary + supplements) estimates of antioxidants (5 out of 7) and methyl-nutrients (4 out of 5). The Block98 FFQ is an appropriate dietary method for evaluating antioxidants in pregnant ethnic/minorities in the US; it may be less efficient in measuring methyl-nutrient and PUFA intakes.

Data Validation Package - June 2016 Groundwater and Surface Water Sampling at the Green River, Utah, Disposal Site

Energy Technology Data Exchange (ETDEWEB)

Linard, Joshua [USDOE Office of Legacy Management, Washington, DC (United States); Price, Jeffrey [Navarro Research and Engineering, Inc., Las Vegas, NV (United States)

2016-10-10

This event included annual sampling of groundwater and surface water locations at the Green River, Utah, Disposal Site. Sampling and analyses were conducted as specified in Sampling and Analysis Plan for US. Department of Energy Office of Legacy Management Sites (LMS/PRO/S04351, continually updated, http://energy.gov/lrnldownloads/sampling-and- analysis-plan-us-department-energy-office-legacy-management-sites). Samples were collected from 15 monitoring wells and two surface locations at the disposal site as specified in the draft 2011 Ground Water Compliance Action Plan for the Green River, Utah, Disposal Site. Planned monitoring locations are shown in Attachment 1, Sampling and Analysis Work Order. A duplicate sample was collected from location 0179. One equipment blank was collected during this sampling event. Water levels were measured at all monitoring wells that were sampled. See Attachment 2, Trip Reports for additional details. The analytical data and associated qualifiers can be viewed in environmental database reports and are also available for viewing with dynamic mapping via the GEMS (Geospatial Environmental Mapping System) website at http://gems.lm.doe.gov/#. No issues were identified during the data validation process that requires additional action or follow-up.

Reliability and validity of the Salford-Scott Nursing Values Questionnaire in Turkish.

Science.gov (United States)

Ulusoy, Hatice; Güler, Güngör; Yıldırım, Gülay; Demir, Ecem

2018-02-01

Developing professional values among nursing students is important because values are a significant predictor of the quality care that will be provided, the clients' recognition, and consequently the nurses' job satisfaction. The literature analysis showed that there is only one validated tool available in Turkish that examines both the personal and the professional values of nursing students. The aim of this study was to assess the reliability and validity of the Salford-Scott Nursing Values Questionnaire in Turkish. This study was a Turkish linguistic and cultural adaptation of a research tool. Participants and research context: The sample of this study consisted of 627 undergraduate nursing students from different geographical areas of Turkey. Two questionnaires were used for data collection: a socio-demographic form and the Salford-Scott Nursing Values Questionnaire. For the Salford-Scott Nursing Values Questionnaire, construct validity was examined using factor analyses. Ethical considerations: The study was approved by the Cumhuriyet University Faculty of Medicine Research Ethics Board. Students were informed that participation in the study was entirely voluntary and anonymous. Item content validity index ranged from 0.66 to 1.0, and the total content validity index was 0.94. The Kaiser-Meyer-Olkin measure of sampling was 0.870, and Bartlett's test of sphericity was statistically significant (x 2 = 3108.714, p < 0.001). Construct validity was examined using factor analyses and the six factors were identified. Cronbach's alpha was used to assess the internal consistency reliability and the value of 0.834 was obtained. Our analyses showed that the Turkish version of Salford-Scott Nursing Values Questionnaire has high validity and reliability.

Methodological Issues in Questionnaire Design.

Science.gov (United States)

Song, Youngshin; Son, Youn Jung; Oh, Doonam

2015-06-01

The process of designing a questionnaire is complicated. Many questionnaires on nursing phenomena have been developed and used by nursing researchers. The purpose of this paper was to discuss questionnaire design and factors that should be considered when using existing scales. Methodological issues were discussed, such as factors in the design of questions, steps in developing questionnaires, wording and formatting methods for items, and administrations methods. How to use existing scales, how to facilitate cultural adaptation, and how to prevent socially desirable responding were discussed. Moreover, the triangulation method in questionnaire development was introduced. Steps were recommended for designing questions such as appropriately operationalizing key concepts for the target population, clearly formatting response options, generating items and confirming final items through face or content validity, sufficiently piloting the questionnaire using item analysis, demonstrating reliability and validity, finalizing the scale, and training the administrator. Psychometric properties and cultural equivalence should be evaluated prior to administration when using an existing questionnaire and performing cultural adaptation. In the context of well-defined nursing phenomena, logical and systematic methods will contribute to the development of simple and precise questionnaires.

Eating traits questionnaires as a continuum of a single concept. Uncontrolled eating.

Science.gov (United States)

Vainik, Uku; Neseliler, Selin; Konstabel, Kenn; Fellows, Lesley K; Dagher, Alain

2015-07-01

Research on eating behaviour has identified several potentially relevant eating-related traits captured by different questionnaires. Often, these questionnaires predict Body Mass Index (BMI), but the relationship between them has not been explicitly studied. We studied the unity and diversity of questionnaires capturing five common eating-related traits: Power of Food, Eating Impulsivity, emotional eating, Disinhibition, and binge eating in women from Estonia (n = 740) and Canada (n = 456). Using bifactor analysis, we showed that a) these questionnaires are largely explained by a single factor, and b) relative to this shared factor, only some questionnaires offered additional variance in predicting BMI. Hence, these questionnaires seemed to characterise a common factor, which we label Uncontrolled Eating. Item Response Theory techniques were then applied to demonstrate that c) within this common factor, the questionnaires could be placed on a continuum of Uncontrolled Eating. That is, Eating Impulsivity focused on the milder degree, Power of Food Scale, emotional eating scales, and Disinhibition on intermediate degrees, and the Binge Eating Scale on the most severe degrees of Uncontrolled Eating. In sum, evidence from two samples showed that questionnaires capturing five common BMI-related traits largely reflected the same underlying latent trait - Uncontrolled Eating. In Estonia, some questionnaires focused on different severities of this common construct, supporting a continuum model of Uncontrolled Eating. These findings provide a starting point for developing better questionnaires of the neurobehavioural correlates of obesity, and provide a unifying perspective from which to view the existing literature. R scripts and data used for the analysis are provided. Copyright © 2015 Elsevier Ltd. All rights reserved.

Questionnaire survey report on measurement of radioactivity in working environment of radioisotopes facility

International Nuclear Information System (INIS)

Kawano, Takao; Nomura, Kiyoshi

2008-01-01

To look over the current measurement of radioactivity concentration in working environment of many radioisotopes facilities, a questionnaire survey was carried out under the auspices of the Planning Committee of the Japan Society of Radiation Safety Management. 64 responses were obtained in 128 radiation facilities, which the questionnaires were sent to. The main results were obtained by aggregate analysis of the answers for questionnaires as the followings. Major nuclides subject to measurement were 3 H, 14 C, 32 P and 125 I Sampling of radioisotopes in air was mainly performed using collectors like dust samplers and HC-collectors. Liquid scintillation counters and gamma counters were used to measure β and γ radioactivity contained in airborne particles or gas samples. Contamination by radioactivity was not detected in 55% facilities surveyed, but in 40% facilities at the same level as or at lower levels than a hundredth part of the regulated concentration limit of each nuclide. Almost all facilities is found to consider that the measurement of radioactivity concentration in working environments is not always necessary. (author)

Psychometric Properties of the German Version of the Pain Vigilance and Awareness Questionnaire (PVAQ) in Pain-Free Samples and Samples with Acute and Chronic Pain

NARCIS (Netherlands)

Kunz, M.; Capito, E. S.; Horn-Hofmann, C.; Baum, C.; Scheel, J.; Karmann, A. J.; Priebe, J. A.; Lautenbacher, S.

The way individuals attend to pain is known to have a considerable impact on the experience and chronification of pain. One method to assess the habitual "attention to pain" is the Pain Vigilance and Awareness Questionnaire (PVAQ). With the present study, we aimed to test the psychometric properties

The Cognitive Distortions Questionnaire (CD-Quest): Validation in a Sample of Adults with Social Anxiety Disorder

OpenAIRE

Kaplan, SC; Morrison, AS; Goldin, PR; Olino, TM; Heimberg, RG; Gross, JJ

2017-01-01

© 2017, Springer Science+Business Media New York. Cognitive distortions are thought to be central to the development and maintenance of anxiety disorders and are a widely acknowledged treatment target in cognitive-behavioral interventions. However, little research has focused on the measurement of cognitive distortions. The Cognitive Distortions Questionnaire (CD-Quest; de Oliveira, Trial-based cognitive therapy: A manual for clinicians, Routledge, New York, 2015), a brief, 15-item questionna...

Tracking Subpixel Targets with Critically Sampled Optical Sensors

Science.gov (United States)

2012-09-01

LEFT BLANK xii LIST OF ACRONYMS AND ABBREVIATIONS PSF point spread function SNR signal-to-noise ratio SLAM simultaneous localization and tracking EO... LIDAR light detection and ranging FOV field of view RMS root mean squared PF particle filter TBD track before detect MCMC monte carlo markov chain

Psychometric evaluation of the impact of weight on quality of life-lite questionnaire (IWQOL-lite) in a community sample.

Science.gov (United States)

Kolotkin, Ronette L; Crosby, Ross D

2002-03-01

The short form of impact of weight on quality of life (IWQOL)-Lite is a 31-item, self-report, obesity-specific measure of health-related quality of life (HRQOL) that consists of a total score and scores on each of five scales--physical function, self-esteem, sexual life, public distress, and work--and that exhibits strong psychometric properties. This study was undertaken in order to assess test-retest reliability and discriminant validity in a heterogeneous sample of individuals not in treatment. Individuals were recruited from the community to complete questionnaires that included the IWQOL-Lite, SF-36, Rosenberg self-esteem (RSE) scale, Marlowe-Crowne social desirability scale, global ratings of quality of life, and sexual functioning and public distress ratings. Persons currently enrolled in weight loss programs or with a body mass index (BMI) of less than 18.5 were dropped from the analyses, leaving 341 females and 153 males for analysis, with an average BMI of 27.4. For test-retest reliability, 112 participants completed the IWQOL-Lite again. ANOVA revealed significant main effects for BMI for all IWQOL-Lite scales and total score. Females showed greater impairment than males on all scales except public distress. Internal consistency ranged from 0.816 to 0.944 for IWQOL-Lite scales and was 0.958 for total score. Test-retest reliability ranged from 0.814 to 0.877 for scales and was 0.937 for total score. Internal consistency and test-retest results for overweight/obese subjects were similar to those obtained for the total sample. There was strong evidence for convergent and discriminant validity of the IWQOL-Lite in overweight/obese subjects. As in previous studies conducted on treatment-seeking obese persons, the IWQOL-Lite appears to be a reliable and valid measure of obesity-specific quality of life in overweight/obese persons not seeking treatment.

Validity and Reliability of the Turkish Chronic Pain Acceptance Questionnaire

Science.gov (United States)

Akmaz, Hazel Ekin; Uyar, Meltem; Kuzeyli Yıldırım, Yasemin; Akın Korhan, Esra

2018-05-29

Pain acceptance is the process of giving up the struggle with pain and learning to live a worthwhile life despite it. In assessing patients with chronic pain in Turkey, making a diagnosis and tracking the effectiveness of treatment is done with scales that have been translated into Turkish. However, there is as yet no valid and reliable scale in Turkish to assess the acceptance of pain. To validate a Turkish version of the Chronic Pain Acceptance Questionnaire developed by McCracken and colleagues. Methodological and cross sectional study. A simple randomized sampling method was used in selecting the study sample. The sample was composed of 201 patients, more than 10 times the number of items examined for validity and reliability in the study, which totaled 20. A patient identification form, the Chronic Pain Acceptance Questionnaire, and the Brief Pain Inventory were used to collect data. Data were collected by face-to-face interviews. In the validity testing, the content validity index was used to evaluate linguistic equivalence, content validity, construct validity, and expert views. In reliability testing of the scale, Cronbach’s α coefficient was calculated, and item analysis and split-test reliability methods were used. Principal component analysis and varimax rotation were used in factor analysis and to examine factor structure for construct concept validity. The item analysis established that the scale, all items, and item-total correlations were satisfactory. The mean total score of the scale was 21.78. The internal consistency coefficient was 0.94, and the correlation between the two halves of the scale was 0.89. The Chronic Pain Acceptance Questionnaire, which is intended to be used in Turkey upon confirmation of its validity and reliability, is an evaluation instrument with sufficient validity and reliability, and it can be reliably used to examine patients’ acceptance of chronic pain.

Polydimethylsiloxane rod extraction, a novel technique for the determination of organic micropollutants in water samples by thermal desorption-capillary gas chromatography-mass spectrometry.

Science.gov (United States)

Montero, L; Popp, P; Paschke, A; Pawliszyn, J

2004-01-30

A novel, simple and inexpensive approach to absorptive extraction of organic compounds from environmental samples is presented. It consists of a polydimethylsiloxane rod used as an extraction media, enriched with analytes during shaking, then thermally desorbed and analyzed by GC-MS. Its performance was illustrated and evaluated for the enrichment of sub- to ng/l of selected chlorinated compounds (chlorobenzenes and polychlorinated biphenyls) in water samples. The new approach was compared to the stir bar sorptive extraction performance. A natural ground water sample from Bitterfeld, Germany, was also extracted using both methods, showing good agreement. The proposed approach presented good linearity, high sensitivity, good blank levels and recoveries comparable to stir bars, together with advantages such as simplicity, lower cost and higher feasibility.

Linguistic adaptation and psychometric evaluation of original Oral Health Literacy-Adult Questionnaire (OHL-AQ).

Science.gov (United States)

Vyas, Shaleen; Nagarajappa, Sandesh; Dasar, Pralhad L; Mishra, Prashant

2016-10-01

Linguistically adapted oral health literacy tools are helpful to assess oral health literacy among local population with clarity and understandability. The original oral health literacy adult questionnaire, Oral Health Literacy Adult Questionnaire, was given in English (2013), consisting of 17 items under 4 domains. The present study rationalizes to culturally adapt and validate Oral Health Literacy Adult Questionnaire into Hindi language. Thus, we objectified to translate Oral Health Literacy Adult Questionnaire into Hindi and test its psychometric properties like reliability and validity among primary school teachers. The Oral Health Literacy Adult Questionnaire was translated into Oral Health Literacy Adult Questionnaire - Hindi Version using the World Health Organization recommended translation back-translation protocol. During pre-testing, an expert panel assessed content validity of the questionnaire. Face validity was assessed on a small sample of 10 individuals. A cross-sectional study was conducted (June-July 2015) and OHL-AQ-H was administered on a convenient sample of 170 primary school teachers. Internal consistency and test-retest reliability were assessed using Cronbach's alpha and Intra-class correlation coefficient (ICC), respectively, with 2 weeks interval to ascertain adherence to the questionnaire response. Predictive validity was tested by comparing OHL-AQ-H scores with clinical indicators like oral hygiene scores and dental caries scores. The concurrent and discriminant validity was assessed through self-reported oral health and through negative association with sociodemographic variables. The data was analyzed by descriptive tests using chi-square and bivariate logistic regression in SPSS software, version 20 and pLiteracy Adult Questionnaire - Hindi Version were 0.94 and 0.70, respectively. Comparisons of varying levels of oral health literacy with self-reported oral health established significant concurrent validity (p=0.01). Significant

Preanalytical Blood Sampling Errors in Clinical Settings

International Nuclear Information System (INIS)

Zehra, N.; Malik, A. H.; Arshad, Q.; Sarwar, S.; Aslam, S.

2016-01-01

Background: Blood sampling is one of the common procedures done in every ward for disease diagnosis and prognosis. Daily hundreds of samples are collected from different wards but lack of appropriate knowledge of blood sampling by paramedical staff and accidental errors make the samples inappropriate for testing. Thus the need to avoid these errors for better results still remains. We carried out this research with an aim to determine the common errors during blood sampling; find factors responsible and propose ways to reduce these errors. Methods: A cross sectional descriptive study was carried out at the Military and Combined Military Hospital Rawalpindi during February and March 2014. A Venous Blood Sampling questionnaire (VBSQ) was filled by the staff on voluntary basis in front of the researchers. The staff was briefed on the purpose of the survey before filling the questionnaire. Sample size was 228. Results were analysed using SPSS-21. Results: When asked in the questionnaire, around 61.6 percent of the paramedical staff stated that they cleaned the vein by moving the alcohol swab from inward to outwards while 20.8 percent of the staff reported that they felt the vein after disinfection. On contrary to WHO guidelines, 89.6 percent identified that they had a habit of placing blood in the test tube by holding it in the other hand, which should actually be done after inserting it into the stand. Although 86 percent thought that they had ample knowledge regarding the blood sampling process but they did not practice it properly. Conclusion: Pre analytical blood sampling errors are common in our setup. Eighty six percent participants though thought that they had adequate knowledge regarding blood sampling, but most of them were not adhering to standard protocols. There is a need of continued education and refresher courses. (author)

Validation of a stroke symptom questionnaire for epidemiological surveys.

Science.gov (United States)

Abe, Ivana Makita; Goulart, Alessandra Carvalho; Santos Júnior, Waldyr Rodrigues; Lotufo, Paulo Andrade; Benseñor, Isabela Martins

2010-07-01

Stroke is a relevant issue within public health and requires epidemiological surveillance tools. The aim here was to validate a questionnaire for evaluating individuals with stroke symptoms in the Stroke Morbidity and Mortality Study (Estudo de Mortalidade e Morbidade do Acidente Vascular Cerebral, EMMA), São Paulo, Brazil. This was a cross-sectional study performed among a sample of the inhabitants of Butantã, an area in the western zone of the city of São Paulo. For all households in the coverage area of a primary healthcare unit, household members over the age of 35 years answered a stroke symptom questionnaire addressing limb weakness, facial weakness, speech problems, sensory disorders and impaired vision. Thirty-six participants were randomly selected for a complete neurological examination (gold standard). Considering all the questions in the questionnaire, the sensitivity was 72.2%, specificity was 94.4%, positive predictive value was 92.9% and negative predictive value was 77.3%. The positive likelihood ratio was 12.9, the negative likelihood ratio was 0.29 and the kappa coefficient was 0.67. Limb weakness was the most sensitive symptom, and speech problems were the most specific. The stroke symptom questionnaire is a useful tool and can be applied by trained interviewers with the aim of identifying community-dwelling stroke patients, through the structure of the Family Health Program.

Quantitative food frequency questionnaire and assessment of dietary intake.

Science.gov (United States)

Singhal, S; Goyle, A; Gupta, R

1998-01-01

India is a land of varied foods and food habits. This makes the task of collecting dietary and nutrient intake data difficult. Methods need to be devised to improve the accuracy in reporting intakes by various population subgroups. There is an urgent need to develop a questionnaire that is simple enough to be administered on a large sample and whose validity and reproducibility has been quantified. Regional differences in food habits and availability will have to be taken into account in the questionnaire design. Packaging of food items with definite portion sizes is not a common practice in Indian markets and labels on food products are neither very informative nor descriptive. Epidemiologists addressing the effects of diet have generally used questionnaires that inquire about the frequency of specified foods consumed and sometimes also attempt to quantify usual portion sizes. A number of investigators have conveyed, apparently independently, that the food frequency questionnaire (FFQ) as a method of dietary assessment is best suited for most epidemiological applications. A food frequency list can form the basis for nutrition education and allows the dietician and the patient to relate individual eating patterns to specific foods. Other advantages of the FFQ are that it is independent of the ability or inclination of an individual to maintain a diary and also provides immediate feedback to patients, physicians and counsellors.

Validation of the Multicultural Personality Questionnaire in the context of personnel selection

NARCIS (Netherlands)

Van der Zee, KI; Zaal, JN; Piekstra, J

The present data provide support for the reliability of the Multicultural Personality Questionnaire among a sample of job applicants (n = 264). Factor analysis confirmed five factors: Cultural Empathy, Open-Mindedness, Social Initiative, Flexibility, and Emotional Stability. Moreover the data

On the construction of a 2-metre mirror blank for the universal reflecting telescope in Tautenburg (German Title: Über die Fertigung eines 2-Meter-Spiegelträgers für das Universal-Spiegelteleskop in Tautenburg )

Science.gov (United States)

Lödel, Wolfgang

The astronomers' desire to penetrate deeper into space transforms into a demand for larger telescopes. The primary mirror constitutes the main part of a reflecting telescope, and it determines all subsequent activities. Already in the 1930s activities existed in the Schott company to manufacture mirror blanks up to diameters of 2 metres, which could not be pursued because of political constraints. This ambitious goal was again picked up a few years after the war. At a time when the procurement of raw materials was extremely difficult, the glass workers of Schott in Jena attacked this large project. After some failures, a good mirror blank could be delivered to the Carl Zeiss Company in 1951 for further processing and for the construction of the first 2-metre reflecting telescope. From 1960 to 1986, this mirror made from optical glass ZK7 served its purpose at the Karl Schwarzschild Observatory in Tautenburg. lt was then replaced by a zero expansion glass ceramics mirror.

Rapid determination of radium-224/226 in seawater sample by alpha spectrometry.

Science.gov (United States)

Song, Lijuan; Yang, Yonggang; Luo, Maoyi; Ma, Yan; Dai, Xiongxin

2017-05-01

A new radiochemical separation method has been developed for rapid determination of alpha-emitting radium isotopes in seawater samples. This method can be applied for the measurement of 226 Ra in seawater samples when 224 Ra is used as tracer for chemical recovery correction. Likewise, 226 Ra can also be added as tracer for the determination of 224 Ra in seawater sample. In the method, radium is first pre-concentrated with hydrous titanium oxide (HTiO) and is purified by combined anion/cation exchange column chromatographic separation. The radium in the eluate is then co-precipitated with HTiO, dissolved in 9 M H 2 SO 4 , and followed through a BaSO 4 micro-precipitation step to prepare a thin-layer counting source to determine the activities of 224 Ra/ 226 Ra by alpha spectrometry. Replicate spike and blank samples were measured to evaluate the performance of the procedure. The minimum detectable activity concentration was determined to be 0.5 mBq·L -1 for 226 Ra and 0.4 mBq·L -1 for 224 Ra in 1 L of seawater sample with a counting time of 48 h. The method is a promising candidate for rapid measurement for alpha-emitting Ra isotopes in a large population of environment water samples. Copyright © 2017 Elsevier Ltd. All rights reserved.

Construction and characteristics of questionnaire for the assessment of defense mechanisms: MOD

Directory of Open Access Journals (Sweden)

Džamonja-Ignjatović Tamara

2014-01-01

Full Text Available Defense mechanisms are psychological constructs of key importance for the assessment of personality and planning therapeutic process. Their assessment is mainly based on interview, observation and projective techniques. Questionnaires, as the self-assessment techniques, apparently are not suitable method for unconscious processes such as defense mechanisms. The paper presents the results of construction of the questionnaire for the assessment of defense mechanisms, abbreviated called MOD (Mechanisms of Defense, which represents an attempt to clarify conceptualization and operationalization of these constructs through a variety of behavioral and emotional manifestations, personal attitudes and beliefs, patterns of interpersonal relationships and feedback from environment. Research objectives included testing of metric characteristics and the factor structure of the questionnaire, as well as its validity for differentiating subjects from clinical and non-clinical populations. The questionnaire has 110 items assessed at the 5-point Likert scale for evaluation of 20 defense mechanisms. The sample consisted of 194 subjects of both sexes, of which 136 students of psychology and social work and 58 nonpsychotic patients from clinical populations. The results showed that the reliability of the scale varies from high to unsatisfactory (Cronbach alpha .82- .35, although for most subscales is around .65-.70. The most of defense mechanisms has one factor structure, whereas from about a third of the subscales two principal components were isolated. Analysis of the structure of mature defense mechanisms clearly derived out four factors corresponding to the presumed mechanisms of defense, while for the groups of neurotic and immature mechanisms were not obtained pure solutions. The questionnaire successfully differentiate clinical from non-clinical sample, based on higher scores on mature and lower scores on immature mechanisms, while the groups did not differ

Development and validation of a questionnaire to measure preferences and expectations of patients undergoing palliative chemotherapy: EXPECT questionnaire.

Science.gov (United States)

Patil, V M; Chakraborty, S; Jithin, T K; Dessai, S; Sajith Babu, T P; Raghavan, V; Geetha, M; Kumar, T Shiva; Biji, M S; Bhattacharjee, A; Nair, C

2016-01-01

The objective was to design and validate the questionnaire for capturing palliative chemotherapy-related preferences and expectations. Single arm, unicentric, prospective observational study. EXPECT questionnaire was designed to capture preferences and expectations of patients undergoing palliative chemotherapy. This questionnaire underwent a linguistic validation and then was tested in patients. Ten patients are undergoing chemotherapy for solid tumors who fulfilled the inclusion and exclusion criteria self-administered the EXPECT questionnaire in regional language. After filling this questionnaire, they self-administered quick questionnaire-10 (QQ-10). SPSS version 16 (IBM New York) was used for analysis. Completion rate of EXPECT questionnaire was calculated. The feasibility, face validity, utility and time taken for completion of EXPECT questionnaire was also assessed. The completion rate of this questionnaire was 100%. All patients completed questionnaire within 5 min. The QQ-10 tool confirmed the feasibility, face validity and utility of the questionnaire. EXPECT questionnaire was validated in the regional language, and it's an effective tool for capturing patient's preferences and expectation from chemotherapy.

Validation of the partner version of the multidimensional vaginal penetration disorder questionnaire: A tool for clinical assessment of lifelong vaginismus in a sample of Iranian population.

Science.gov (United States)

Molaeinezhad, Mitra; Khoei, Effat Merghati; Salehi, Mehrdad; Yousfy, Alireza; Roudsari, Robab Latifnejad

2014-01-01

The role of spousal response in woman's experience of pain during the vaginal penetration attempts believed to be an important factor; however, studies are rather limited in this area. The aim of this study was to develop and investigate the psychometric indexes of the partner version of a multidimensional vaginal penetration disorder questionnaire (PV-MVPDQ); hence, the clinical assessment of spousal psychosexual reactions to vaginismus by specialists will be easier. A mixed-methods sequential exploratory design was used, through that, the findings from a thematic qualitative research with 20 unconsummated couples, which followed by an extensive literature review used for development of PV-MVPDQ. A consecutive sample of 214 men who their wives' suffered from lifelong vaginismus (LLV) based on Diagnostic and Statistical Manual of Mental Disorders 4(th) version (DSM)-IVTR criteria during a cross-sectional design, completed the questionnaire and additional questions regarding their demographic and sexual history. Validation measures and reliability were conducted by exploratory factor analysis (EFA) and Cronbach's alpha coefficient through SPSS version 16 manufactured by SPSS Inc. (IBM corporation, Armonk, USA). After conducting EFA PV-MVPDQ emerged as having 40 items and 7 dimensions: Helplessness, sexual information, vicious cycle of penetration, hypervigilance and solicitous, catastrophic cognitions, sexual and marital adjustment and optimism. Subscales of PV-MVPDQ showed a significant reliability (0.71-0.85) and results of test-retest were satisfactory. The present study shows PV-MVPDQ is a multi-dimensional valid and reliable self-report questionnaire for assessment of cognitions, sexual and marital relations related to vaginal penetrations in spouses of women with LLV. It may assist specialists to base on which clinical judgment and appropriate planning for clinical management.

Factor structure of the Self-Regulation Questionnaire (SRQ) at Spanish universities.

Science.gov (United States)

Pichardo, Carmen; Justicia, Fernando; de la Fuente, Jesús; Martínez-Vicente, José Manuel; Berbén, Ana B G

2014-08-04

The Self-Regulation Questionnaire (SRQ) has been used in psychology research during the last decade. The instrument has been used in a variety of life domains: psychological well-being, dispositional happiness, depressive symptoms and career adaptability. This investigation studies the factor structure and internal consistency of the SRQ, extracting a short version in the Spanish context and examining its relation to academic variables (self-regulated learning and grades). The analysis started from a version with 63 items, representing seven conceptual dimensions. This version was administered to a sample of 834 students from Education and Psychology. The data from the above-mentioned sample were randomly divided into two sets, each containing 50% of the students (n = 417): exploratory and confirmatory. In the exploratory sample, exploratory factor analysis findings suggested a more parsimonious measurement model, with 17 items and 4 first-order factors. The confirmatory sample was used in the confirmatory factor analysis. The results show evidence for the internal consistency of the Short Self-Regulation Questionnaire (SSRQ) in the Spanish context, with indices greater than .90 and errors around .05. Regarding academic variables, both versions are related to self-regulated learning (r = .40, p < .01) and students' grades (r = .15, p < .01). Differences from other studies done in North America are discussed, as well as similarities to a study from North-West University (in South Africa).

A randomized trial found online questionnaires supplemented by postal reminders generated a cost-effective and generalizable sample but don't forget the reminders.

Science.gov (United States)

Loban, Amanda; Mandefield, Laura; Hind, Daniel; Bradburn, Mike

2017-12-01

The objective of this study was to compare the response rates, data completeness, and representativeness of survey data produced by online and postal surveys. A randomized trial nested within a cohort study in Yorkshire, United Kingdom. Participants were randomized to receive either an electronic (online) survey questionnaire with paper reminder (N = 2,982) or paper questionnaire with electronic reminder (N = 2,855). Response rates were similar for electronic contact and postal contacts (50.9% vs. 49.7%, difference = 1.2%, 95% confidence interval: -1.3% to 3.8%). The characteristics of those responding to the two groups were similar. Participants nevertheless demonstrated an overwhelming preference for postal questionnaires, with the majority responding by post in both groups. Online survey questionnaire systems need to be supplemented with a postal reminder to achieve acceptable uptake, but doing so provides a similar response rate and case mix when compared to postal questionnaires alone. For large surveys, online survey systems may be cost saving. Copyright © 2017 Elsevier Inc. All rights reserved.

[Cultural adaptation of the female pelvic floor questionnaire (FPFQ) into French].

Science.gov (United States)

Deparis, J; Bonniaud, V; Desseauve, D; Guilhot, J; Masanovic, M; De Tayrac, R; Fauconnier, A; Fritel, X

2017-09-01

The Female Pelvic Floor Questionnaire (FPFQ) is a self-administered tool on pelvic floor function. Our aim was to carry out a cultural adaptation of the FPFQ into French and to assess its psychometric properties. After cross-cultural adaptation into French, acceptability and reliability of the questionnaire were assessed through a sample of 56 women in a test-retest. Discriminative construct validity was evaluated by comparing the results obtained by the FPFQ to those of other validated questionnaires. Longitudinal follow-up of the 282 pregnant women included in the PreNatal Pelvic floor Prevention trial (3PN) was used to analyze responsiveness. The proportion of missing data did not exceed 4 % for questions about bladder function, bowel function and pelvic organ prolapse; 10 % for issues related to sexual function. Question 9 was considered difficult to understand by 14 % of women. After rewriting, this issue was retested in a new sample of 52 women and presented no further problems. The intra-class correlation coefficient was greater than or equal to 0.7 for all domains during the test-retest. The FPFQ was strongly and significantly correlated (Spearman r>0.5) with the other validated questionnaires. The French version of FPFQ recorded changes in urinary and sexual symptoms for the women involved in 3PN trial with a standardized response mean equal to 0.83 and 0.44, respectively. The French version of the FPFQ is self-administered, reliable, valid, and can detect a change in symptoms during follow-up. Level 4. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

The eye-complaint questionnaire in a visual display unit work environment: Internal consistency and test-retest reliability

NARCIS (Netherlands)

Steenstra, Ivan A.; Sluiter, Judith K.; Frings-Dresen, Monique H. W.

2009-01-01

The internal consistency and test-retest reliability of a 10-item eye-complaint questionnaire (ECQ) were examined within a sample of office workers. Repeated within-subjects measures were performed within a single day and over intervals of 1 and 7 d. Questionnaires were completed by 96 workers (70%

An ultra-short screening version of the Recalled Parental Rearing Behavior questionnaire (FEE-US and its factor structure in a representative German sample

Directory of Open Access Journals (Sweden)

Petrowski Katja

2012-11-01

Full Text Available Abstract Background The Recalled Parental Rearing Behavior questionnaire (FEE, [1,2] assesses perceived parental rearing behavior separately for each parent. An ultra-short screening version (FEE-US with the same three scales each for the mother and the father is reported and factor-analytically validated. Methods N = 4,640 subjects aged 14 to 92 (M = 48.4 years were selected by the random-route sampling method. The ultra-short questionnaire version was derived from the long version through item and factor analyses. In a confirmatory factor analysis framework, the hypothesized three-factorial structure was fitted to the empirical data and tested for measurement invariance, differential item functioning, item discriminability, and convergent and discriminant factorial validity. Effects of gender or age were assessed using MANOVAs. Results The a-priori hypothesized model resulted in mostly adequate overall fit. Neither gender nor age group yielded considerable effects on the factor structure, but had small effects on means of raw score sums. Factorial validities could be confirmed. Scale sums are well-suited to rank respondents along the respective latent dimension. Conclusion The structure of the long version with the factors Rejection & Punishment, Emotional Warmth, and Control & Overprotection could be replicated for both father and mother items in the ultra-short screening version using confirmatory factor analyses. These results indicate that the ultra-short screening version is a time-saving and promising screening instrument for research settings and in individual counseling. However, the shortened scales do not necessarily represent the full spectrum covered by the full-scale dimensions.

Validation of eating disorders examination questionnaire in Mexican women.

Science.gov (United States)

Unikel Santoncini, Claudia; Bojorquez Chapela, Ietza; Díaz de León Vázquez, Concepción; Vázquez Velázquez, Verónica; Rivera Márquez, José Alberto; Galván Sánchez, Griselda; Rocha Velis, Ingrid

2018-02-01

Efficient assessment of eating disorders (ED) is indispensable for research and clinical practice in Mexico. One of the most commonly used questionnaires, the EDE-Q, has a self-applicable questionnaire format with 28 questions and four subscales drawn from the Eating Disorder Examination (EDE), a semistructured interview developed to evaluate the specific symptomatology of eating disorders. Obtain the factorial structure and construct validity of the EDE-Q questionnaire in Mexican women. The language in the EDE-Q was adapted. It was applied to university students (N = 330) and a sample of patients with ED (N = 165) from two ED outpatient treatment services. The anthropometric data of the participants was obtained. Internal consistency was explored using the Cronbach's Alpha coefficient and a confirmatory factor analysis was conducted by group. Cronbach's alpha was 0.9 for the full scale in all groups, while the reliability of each of the subscales fluctuated between 0.8 and 0.9. Confirmatory factor analysis showed that the fit of the seven-item model in three factors was better than that of the original 22-item one and that of the eight-item model for one factor. This study provides information supporting the seven-item and three-factor version, rather than the original or eight-item versions of the EDE-Q. In the future, the adapted version of the EDE-Q will make it possible to draw comparisons between Mexican samples in other socio-cultural contexts. Future research is required to continue refining the instruments to achieve more representative results from the general ED population. © 2018 Wiley Periodicals, Inc.

Systematic Development and Validation of a Theory-Based Questionnaire to Assess Toddler Feeding12

OpenAIRE

Hurley, Kristen M.; Pepper, M. Reese; Candelaria, Margo; Wang, Yan; Caulfield, Laura E.; Latta, Laura; Hager, Erin R.; Black, Maureen M.

2013-01-01

This paper describes the development and validation of a 27-item caregiver-reported questionnaire on toddler feeding. The development of the Toddler Feeding Behavior Questionnaire was based on a theory of interactive feeding that incorporates caregivers’ responses to concerns about their children’s dietary intake, appetite, size, and behaviors rather than relying exclusively on caregiver actions. Content validity included review by an expert panel (n = 7) and testing in a pilot sample (n = 10...

The Derivation of Job Compensation Index Values from the Position Analysis Questionnaire (PAQ). Report No. 6.

Science.gov (United States)

McCormick, Ernest J.; And Others

The study deals with the job component method of establishing compensation rates. The basic job analysis questionnaire used in the study was the Position Analysis Questionnaire (PAQ) (Form B). On the basis of a principal components analysis of PAQ data for a large sample (2,688) of jobs, a number of principal components (job dimensions) were…

[Reliability and validity of the PAQ-A questionnaire to assess physical activity in Spanish adolescents].

Science.gov (United States)

Martínez-Gómez, David; Martínez-de-Haro, Vicente; Pozo, Tamara; Welk, Gregory J; Villagra, Ariel; Calle, Marisa E; Marcos, Ascensión; Veiga, Oscar L

2009-01-01

Questionnaires are feasible instruments to assess physical activity (PA) in large samples. The aim of the current study was to evaluate the reliability and validity of the PAQ-A questionnaire in Spanish adolescents using the measurement of PA by accelerometer as criterion. In a sample of 82 adolescents, aged 12 to 17 years, 1-week PAQ-A test-retest was administered. Reliability was analyzed by the Intraclass Correlation Coefficient (ICC) and the internal consistency by the Cronbach's alpha Coefficient. Two hundred thirty-two adolescents, aged 13-17 years, completed the PAQ-A and wore the ActiGraph GT1M accelerometer during 7-days. The PAQ-A was compared against total PA and moderate to vigorous PA (MVPA) obtained by the accelerometer. Test-retest reliability showed ICC = 0.71 for the final score of PAQ-A. Internal consistency was alpha = 0.65 in the first self-report, alpha = 0.67 in the retest in 82 adolescents sample, and alpha = 0.74 in the 232 adolescents sample. The PAQ-A was moderately correlated with total PA (rho = 0.39) and MVPA (rho= 0.34) assessed by the accelerometer. The PAQ-A obtained significantly moderate correlations in boys but not in girls against the accelerometer. The PAQ-A questionnaire shows an adequate reliability and a reasonable validity for assessing PA in Spanish adolescents.

The Metacognitions about Gambling Questionnaire: Development and psychometric properties.

Science.gov (United States)

Caselli, Gabriele; Fernie, Bruce; Canfora, Flaviano; Mascolo, Cristina; Ferrari, Andrea; Antonioni, Maria; Giustina, Lucia; Donato, Gilda; Marcotriggiani, Antonella; Bertani, Andrea; Altieri, Antonella; Pellegrini, Eliana; Spada, Marcantonio M

2018-03-01

Recent research has suggested that metacognitions may play a role across the spectrum of addictive behaviours. The goal of our studies was to develop the first self-report scale of metacognitions about gambling. We conducted three studies with one community (n = 165) and two clinical (n = 110; n = 87) samples to test the structure and psychometric properties of the Metacognitions about Gambling Questionnaire and examined its capacity to prospectively predict severity of gambling. Findings supported a two factor solution consisting of positive and negative metacognitions about gambling. Internal consistency, predictive and divergent validity were acceptable. All the factors of the Metacognitions about Gambling Questionnaire correlated positively with gambling severity. Regression analyses showed that negative metacognitions about gambling were significantly associated to gambling severity over and above negative affect and gambling-specific cognitive distortions. Finally only gambling severity and negative metacognitions about gambling were significant prospective predictors of gambling severity as measured three months later. The Metacognitions about Gambling Questionnaire was shown to possess good psychometric properties, as well as predictive and divergent validity within the populations that were tested. Copyright © 2018 Elsevier B.V. All rights reserved.

Validez del Cuestionario International Personality Disorder Examination (IPDE en una muestra de población penitenciaria Validity of the International Personality Disorder Examination (IPDE questionnaire in a sample of prison inmates

Directory of Open Access Journals (Sweden)

E. Álvaro-Brun

2008-10-01

Full Text Available Objetivo: Conocer los índices validez y establecer el punto de corte más adecuado cuando se utiliza el cuestionario IPDE en una muestra de población penitenciaria. Material y método: Estudio transversal realizado con una muestra de 100 penados de dos centros penitenciarios de Madrid seleccionados de forma correlativa. Instrumentos de evaluación, cuestionario de datos demográficos, penitenciarios y toxicológicos; y entrevista completa y cuestionario de evaluación IPDE versión DSM-IV. Estudio de sensibilidad y especificidad del cuestionario IPDE con distintos puntos de corte utilizando como "patrón oro" la entrevista IPDE. Resultados: Utilizando el punto de corte 3 o más respuestas no coincidentes con la esperadas, se encuentra baja especificidad (2,5% para la presencia de uno o más trastornos de la personalidad, y baja sensibilidad para los trastornos antisocial (56,7% y límite (58,8% de la personalidad. Discusión: El cuestionario IPDE tiene escasa utilidad en la población penitenciaria estudiada cuando se aplica con los estándares de referencia habituales, pues el número de falsos positivos que produce es muy elevado. Los mejores índices de validez para identificar uno o más trastornos de la personalidad se obtienen con el punto de corte probable igual a 4 o más respuestas no coincidentes con las esperadas. En cualquier caso el uso del cuestionario IPDE en los reclusos evaluados no aporta beneficios ya que, incluso con el punto de corte habitual de 3 o más respuestas no coincidentes, para los trastornos de personalidad más frecuentes en la muestra estudiada, el antisocial y el límite, se observa que la sensibilidad es baja.Objective: To discover the validity indices and establish the most adequate cut off point when using the IPDE questionnaire on a sample of prison inmates. Materials and Methods: A transversal study was carried out on a correlatively selected sample of 100 inmates at two prisons in Madrid. Evaluation

Using e-mail recruitment and an online questionnaire to establish effect size: A worked example.

Science.gov (United States)

Kirkby, Helen M; Wilson, Sue; Calvert, Melanie; Draper, Heather

2011-06-09

Sample size calculations require effect size estimations. Sometimes, effect size estimations and standard deviation may not be readily available, particularly if efficacy is unknown because the intervention is new or developing, or the trial targets a new population. In such cases, one way to estimate the effect size is to gather expert opinion. This paper reports the use of a simple strategy to gather expert opinion to estimate a suitable effect size to use in a sample size calculation. Researchers involved in the design and analysis of clinical trials were identified at the University of Birmingham and via the MRC Hubs for Trials Methodology Research. An email invited them to participate.An online questionnaire was developed using the free online tool 'Survey Monkey©'. The questionnaire described an intervention, an electronic participant information sheet (e-PIS), which may increase recruitment rates to a trial. Respondents were asked how much they would need to see recruitment rates increased by, based on 90%. 70%, 50% and 30% baseline rates, (in a hypothetical study) before they would consider using an e-PIS in their research.Analyses comprised simple descriptive statistics. The invitation to participate was sent to 122 people; 7 responded to say they were not involved in trial design and could not complete the questionnaire, 64 attempted it, 26 failed to complete it. Thirty-eight people completed the questionnaire and were included in the analysis (response rate 33%; 38/115). Of those who completed the questionnaire 44.7% (17/38) were at the academic grade of research fellow 26.3% (10/38) senior research fellow, and 28.9% (11/38) professor. Dependent upon the baseline recruitment rates presented in the questionnaire, participants wanted recruitment rate to increase from 6.9% to 28.9% before they would consider using the intervention. This paper has shown that in situations where effect size estimations cannot be collected from previous research, opinions

Questionnaires for Measuring Refractive Surgery Outcomes.

Science.gov (United States)

Kandel, Himal; Khadka, Jyoti; Lundström, Mats; Goggin, Michael; Pesudovs, Konrad

2017-06-01

To identify the questionnaires used to assess refractive surgery outcomes, assess the available questionnaires in regard to their psychometric properties, validity, and reliability, and evaluate the performance of the available questionnaires in measuring refractive surgery outcomes. An extensive literature search was done on PubMed, MEDLINE, Scopus, CINAHL, Cochrane, and Web of Science databases to identify articles that described or used at least one questionnaire to assess refractive surgery outcomes. The information on content quality, validity, reliability, responsiveness, and psychometric properties was extracted and analyzed based on an extensive set of quality criteria. Eighty-one articles describing 27 questionnaires (12 refractive error-specific, including 4 refractive surgery-specific, 7 vision-but-non-refractive, and 8 generic) were included in the review. Most articles (56, 69.1%) described refractive error-specific questionnaires. The Quality of Life Impact of Refractive Correction (QIRC), the Quality of Vision (QoV), and the Near Activity Visual Questionnaire (NAVQ) were originally constructed using Rasch analysis; others were developed using the Classical Test Theory. The National Eye Institute Refractive Quality of Life questionnaire was the most frequently used questionnaire, but it does not provide a valid measurement. The QoV, QIRC, and NAVQ are the three best existing questionnaires to assess visual symptoms, quality of life, and activity limitations, respectively. This review identified three superior quality questionnaires for measuring different aspects of quality of life in refractive surgery. Clinicians and researchers should choose a questionnaire based on the concept being measured with superior psychometric properties. [J Refract Surg. 2017;33(6):416-424.]. Copyright 2017, SLACK Incorporated.

Validity and reliability of short form-12 questionnaire in Iranian hemodialysis patients

DEFF Research Database (Denmark)

Pakpour, Amir H.; Nourozi, Saeedeh; Mølsted, Stig

2011-01-01

INTRODUCTION: The aim of the study was to assess the validity and reliability of the SF-12 questionnaire in a sample of Iranian patients undergoing hemodialysis. MATERIALS AND METHODS: One hundred and forty-four hemodialysis patients were included from dialysis centers in Zanjan, Iran, and were...... asked to complete the SF-12 and SF-36 questionnaires. An initial test-retest reliability evaluation was performed on a sample of 70 patients from the total group, with a retest interval of 14 days. Reliability was estimated by internal consistency and validity was assessed using known-group comparisons...... and construct validity on the patient group as a whole. A linear regression analysis was used to assess any variation in the physical component summary and mental component summary scores of the SF-36 with the respective component summary scores of the SF-12. In addition, the factor structure...

Questionnaire of core beliefs related to drug use and craving for assessment of relapse risk.

Science.gov (United States)

Martínez-González, José Miguel; Vilar López, Raquel; Lozano-Rojas, Oscar; Verdejo-García, Antonio

2017-07-12

This study was aimed at designing a questionnaire for the assessment of addiction-related core beliefs and craving. The sample comprised 215 patients (85.8% males and 14.2% females) in treatment for dependence to alcohol (40%), cocaine (36.3%) and cannabis (23.7%). Descriptive statistics were used to characterize the sample. Variance, regression and factorial analyses were conducted to study the questionnaire structure and its relation with variables such as abstinence and craving. Items about drug-related beliefs yielded a four-factor structure: what patient think that they could not do without drug use, lack of withdrawal, conditions required to use drugs again, and use of drugs as the only way to feel good. Items related to craving yielded three factors: negative emotions as precipitants of drug use, positive emotions, and difficulties attributed to coping with craving. Furthermore, beliefs were more important to predict craving than abstinence time. The present questionnaire allows to assess a set of significant factors to design prevention relapse programs.

Development for ultra-trace analysis method of U and Pu in safeguards environmental samples at the clean facility

International Nuclear Information System (INIS)

Takahashi, Masato; Magara, Masaaki; Sakurai, Satoshi

2002-01-01

Based on the strengthen safeguard program of the IAEA to detect undeclared nuclear activities and nuclear materials, the method of precise and accurate isotope ratio determination for uranium and plutonium in the environmental samples (cotton swipes) has been developed at JAERI. The samples should be treated in clean environment in order to secure the analytical reliability by eliminating external contamination from the samples containing trace amount of uranium and plutonium. Since the measurement by ICP-MS is favorable to bulk analysis from view points of analytical capacity and operation simplicity, we have studied sample preparation procedures for the trace amount of uranium and plutonium to be applied to ICP-MS. Up to the present, interfering factors involved during analytical processes and the ICP-MS measurement of uranium and plutonium were examined. As a result, uranium isotope measurement more than 100 pg became possible at JAERI clean facility by diminishing uranium blank introduced in the entire sample treatment procedure. And also, the estimation of plutonium recovery yield and uranium decontamination factor suggested the possibility in plutonium isotope measurement more than 100 fg. (author)

Empirical validation of the Horowitz Multiple Systemic Infectious Disease Syndrome Questionnaire for suspected Lyme disease.

Science.gov (United States)

Citera, Maryalice; Freeman, Phyllis R; Horowitz, Richard I

2017-01-01

Lyme disease is spreading worldwide, with multiple Borrelia species causing a broad range of clinical symptoms that mimic other illnesses. A validated Lyme disease screening questionnaire would be clinically useful for both providers and patients. Three studies evaluated such a screening tool, namely the Horowitz Multiple Systemic Infectious Disease Syndrome (MSIDS) Questionnaire. The purpose was to see if the questionnaire could accurately distinguish between Lyme patients and healthy individuals. Study 1 examined the construct validity of the scale examining its factor structure and reliability of the questionnaire among 537 individuals being treated for Lyme disease. Study 2 involved an online sample of 999 participants, who self-identified as either healthy (N=217) or suffering from Lyme now (N=782) who completed the Horowitz MSIDS Questionnaire (HMQ) along with an outdoor activity survey. We examined convergent validity among components of the scale and evaluated discriminant validity with the Big Five personality characteristics. The third study compared a sample of 236 patients with confirmed Lyme disease with an online sample of 568 healthy individuals. Factor analysis results identified six underlying latent dimensions; four of these overlapped with critical symptoms identified by Horowitz - neuropathy, cognitive dysfunction, musculoskeletal pain, and fatigue. The HMQ showed acceptable levels of internal reliability using Cronbach's coefficient alpha and exhibited evidence of convergent and divergent validity. Components of the HMQ correlated more highly with each other than with unrelated traits. The results consistently demonstrated that the HMQ accurately differentiated those with Lyme disease from healthy individuals. Three migratory pain survey items (persistent muscular pain, arthritic pain, and nerve pain/paresthesias) robustly identified individuals with verified Lyme disease. The results support the use of the HMQ as a valid, efficient, and low

How to score questionnaires

NARCIS (Netherlands)

Hofstee, W.K.B.; Ten Berge, J.M.F.; Hendriks, A.A.J.

The standard practice in scoring questionnaires consists of adding item scores and standardizing these sums. We present a set of alternative procedures, consisting of (a) correcting for the acquiescence variance that disturbs the structure of the questionnaire; (b) establishing item weights through

SECTIONAL AREA CALCULATION OF MATERIAL REMOVED FROM BLANK WHILE FORMING SPACE BETWEEN TWO TEETH OF SATELLITE GEAR OF PLANETARY PIN TOOTH REDUCER

Directory of Open Access Journals (Sweden)

N. G. Yankevich

2009-01-01

Full Text Available One of the most important values while forming gear wheels is a material section area Sс which is to be removed by a tool in the process of forming a space between two teeth in one pass. Cutting resistance which is proportional  to section area of  the layer to be cut and, correspondingly, a thermodynamic intensity in the polishing zone depend on Sс value.The paper proposes relations for calculation of a material section area Sс which is to be removed from a blank while forming a space between two teeth of a satellite gear of a planetary pin tooth reducer.Measurements being made in the AutoCAD packet have shown that any corrections of the profile do not make a significant influence on a section area Sс.

What impact do questionnaire length and monetary incentives have on mailed health psychology survey response?

Science.gov (United States)

Robb, Kathryn A; Gatting, Lauren; Wardle, Jane

2017-11-01

Response rates to health-related surveys are declining. This study tested two strategies to improve the response rate to a health psychology survey mailed through English general practices: (1) sending a shortened questionnaire and (2) offering a monetary incentive to return a completed questionnaire. Randomized controlled trial. Adults (n = 4,241) aged 45-59 years, from four General Practices in South-East England, were mailed a survey on attitudes towards bowel cancer screening. Using a 2 × 4 factorial design, participants were randomized to receive a 'short' (four A4 pages) or a 'long' (seven A4 pages) questionnaire, and one of four monetary incentives to return a completed questionnaire - (1) no monetary incentive, (2) £2.50 shop voucher, (3) £5.00 shop voucher, and (4) inclusion in a £250 shop voucher prize draw. Age, gender, and area-level deprivation were obtained from the General Practices. The overall response rate was 41% (n = 1,589). Response to the 'short' questionnaire (42%) was not significantly different from the 'long' questionnaire (40%). The £2.50 incentive (43%) significantly improved response rates in univariate analyses, and remained significant after controlling for age, gender, area-level deprivation, and questionnaire length. The £5.00 (42%) and £250 prize draw (41%) incentives had no significant impact on response rates compared to no incentive (38%). A small monetary incentive (£2.50) may slightly increase response to a mailed health psychology survey. The length of the questionnaire (four pages vs. seven pages) did not influence response. Although frequently used, entry into a prize draw did not increase response. Achieving representative samples remains a challenge for health psychology. Statement of contribution What is already known on this subject Response rates to mailed questionnaires continue to decline, threatening the representativeness of data. Prize draw incentives are frequently used but there is little evidence

Polish Adaptation of Wrist Evaluation Questionnaires.

Science.gov (United States)

Czarnecki, Piotr; Wawrzyniak-Bielęda, Anna; Romanowski, Leszek

2015-01-01

Questionnaires evaluating hand and wrist function are a very useful tool allowing for objective and systematic recording of symptoms reported by the patients. Most questionnaires generally accepted in clinical practice are available in English and need to be appropriately adapted in translation and undergo subsequent validation before they can be used in another culture and language. The process of translation of the questionnaires was based on the generally accepted guidelines of the International Quality of Life Assessment Project (IQOLA). First, the questionnaires were translated from English into Polish by two independent translators. Then, a joint version of the translation was prepared collectively and translated back into English. Each stage was followed by a written report. The translated questionnaires were then evaluated by a group of patients. We selected 31 patients with wrist problems and asked them to complete the PRWE, Mayo, Michigan and DASH questionnaires twice at intervals of 3-10 days. The results were submitted for statistical analysis. We found a statistically significant (pquestionnaires. A comparison of the PRWE and Mayo questionnaires with the DASH questionnaire also showed a statistically significant correlation (pquestionnaires was successful and that the questionnaires may be used in clinical practice.

Finding Pearls: Psychometric Reevaluation of the Simpson-Troost Attitude Questionnaire (STAQ)

Science.gov (United States)

Owen, Steven V.; Toepperwein, Mary Anne; Marshall, Carolyn E.; Lichtenstein, Michael J.; Blalock, Cheryl L.; Liu, Yan; Pruski, Linda A.; Grimes, Kandi

2008-01-01

The Simpson-Troost Attitude Questionnaire (STAQ) was developed as part of a study to assess adolescent commitment to and achievement in science. For this psychometric reappraisal of the 57-item STAQ, data were analyzed from a convenience sample of 1,754 secondary students. Confirmatory and exploratory factor analyses were applied, and results…

Linguistic adaptation and psychometric evaluation of original oral health literacy-adult questionnaire (OHL-AQ

Directory of Open Access Journals (Sweden)

SHALEEN VYAS

2016-10-01

Full Text Available Introduction: Linguistically adapted oral health literacy tools are helpful to assess oral health literacy among local population with clarity and understandability. The original oral health literacy adult questionnaire, Oral Health Literacy Adult Questionnaire, was given in English (2013, consisting of 17 items under 4 domains. The present study rationalizes to culturally adapt and validate Oral Health Literacy Adult Questionnaire into Hindi language. Thus, we objectified to translate Oral Health Literacy Adult Questionnaire into Hindi and test its psychometric properties like reliability and validity among primary school teachers. Methods: The Oral Health Literacy Adult Questionnaire was translated into Oral Health Literacy Adult Questionnaire – Hindi Version using the World Health Organization recommended translation backtranslation protocol. During pre-testing, an expert panel assessed content validity of the questionnaire. Face validity was assessed on a small sample of 10 individuals. A cross-sectional study was conducted (June-July 2015 and OHL-AQ-H was administered on a convenient sample of 170 primary school teachers. Internal consistency and testretest reliability were assessed using Cronbach’s alpha and Intra-class correlation coefficient (ICC, respectively, with 2 weeks interval to ascertain adherence to the questionnaire response. Predictive validity was tested by comparing OHL-AQ-H scores with clinical indicators like oral hygiene scores and dental caries scores. The concurrent and discriminant validity was assessed through self-reported oral health and through negative association with sociodemographic variables. The data was analyzed by descriptive tests using chi-square and bivariate logistic regression in SPSS software, version 20 and p<0.05 was considered as the significance level. Results: The mean OHL-AQ-H score was 13.58±2.82. ICC and Cronbach’s alpha for Oral Health Literacy Adult Questionnaire – Hindi Version

Validation of the comprehensive feeding practices questionnaire in parents of preschool children in Brazil

Directory of Open Access Journals (Sweden)

Sarah Warkentin

2016-07-01

Full Text Available Abstract Background Recent national surveys in Brazil have demonstrated a decrease in the consumption of traditional food and a parallel increase in the consumption of ultra-processed food, which has contributed to a rise in obesity prevalence in all age groups. Environmental factors, especially familial factors, have a strong influence on the food intake of preschool children, and this has led to the development of psychometric scales to measure parents’ feeding practices. The aim of this study was to test the validity of a translated and adapted Comprehensive Feeding Practices Questionnaire in a sample of Brazilian preschool-aged children enrolled in private schools. Methods A transcultural adaptation process was performed in order to develop a modified questionnaire (43 items. After piloting, the questionnaire was sent to parents, along with additional questions about family characteristics. Test-retest reliability was assessed in one of the schools. Factor analysis with oblique rotation was performed. Internal reliability was tested using Cronbach’s alpha and correlations between factors, discriminant validity using marker variables of child’s food intake, and convergent validity via correlations with parental perceptions of perceived responsibility for feeding and concern about the child’s weight were also performed. Results The final sample consisted of 402 preschool children. Factor analysis resulted in a final questionnaire of 43 items distributed over 6 factors. Cronbach alpha values were adequate (0.74 to 0.88, between-factor correlations were low, and discriminant validity and convergent validity were acceptable. Conclusions The modified CFPQ demonstrated significant internal reliability in this urban Brazilian sample. Scale validation within different cultures is essential for a more comprehensive understanding of parental feeding practices for preschoolers.

The Metacognitions about Gambling Questionnaire: Development and psychometric properties.

OpenAIRE

Caselli, G; Fernie, B; Canfora, F; Mascolo, C; Ferrari, A; Antonioni, M; Giustina, L; Donato, G; Marcotriggiani, A; Bertani, A; Altieri, A; Pellegrini, E; Spada, MM

2018-01-01

Recent research has suggested that metacognitions may play a role across the spectrum of addictive behaviours. The goal of our studies was to develop the first self-report scale of metacognitions about gambling. We conducted three studies with one community (n = 165) and two clinical (n = 110; n = 87) samples to test the structure and psychometric properties of the Metacognitions about Gambling Questionnaire and examined its capacity to prospectively predict severity of gambling. Findings sup...

[Validation of the Otitis Media-6 Questionnaire for European Portuguese].

Science.gov (United States)

Lameiras, Ana Rita; Silva, Deodato; O'Neill, Assunção; Escada, Pedro

2017-05-31

Otitis media is one of the most prevalent childhood diseases. The impact of otitis media on quality of life of Portuguese children is unknown, because of the unavailability of a tool validated in European Portuguese to assess this consequence of otitis media. The Otitis Media-6 questionnaire (Otitis Media-6) is the most frequently used tool to assess health-related quality of life in children with otitis media. This study aims to create a version in the Portuguese language and culturally adapted to Portugal of the otitis media-6 questionnaire. The Otitis Media-6 questionnaire was translated and culturally adapted to the Portuguese language and population. Then, to assess the instrument psychometric properties, it was applied to a sample of Portuguese children with chronic otitis media with effusion or recurrent acute otitis media. The Portuguese version of Otitis Media-6 questionnaire demonstrated the following psychometric properties: construct validity for baseline (rs = 0.98) and change scores (rs = 0.97), internal consistency (α = 0.780), test-retest reliability (rs = 0.89) and responsiveness to clinical change (t(59) = 10.104). The simplicity and brevity of application of the instrument make it ideal for use in research and in clinical practice, enabling a more objective assessment of the extension of the otitis media impact in children quality of life and a more targeted therapeutic decision. The Portuguese version of the Otitis Media-6 questionnaire is a valid, reliable and sensitive instrument to evaluate the health-related quality of life in Portuguese children with otitis media.

Relative validity of a food frequency questionnaire to assess nutrient intake in pregnant women.

Science.gov (United States)

McGowan, C A; Curran, S; McAuliffe, F M

2014-04-01

To date, there are no food frequency questionnaires that have been validated to assess nutrient intakes in pregnant women in Ireland. The present study aimed to assess the relative validity of a self-administered food frequency questionnaire during pregnancy. The food frequency questionnaire was administered once during pregnancy between 12 and 34 weeks. Participants also completed a 3-day food diary during each trimester of pregnancy (reference method) and intakes from both the food frequency questionnaire and the mean of the 3-day food diaries were compared in a sample of 130 participants from the control arm of an intervention study. Energy-adjusted Pearson's correlation coefficients ranged from 0.24 (riboflavin) to 0.59 (magnesium) and were all statistically significant (P food frequency questionnaire tended to report higher energy and nutrient intakes compared to the food diaries. On average, 74% of participants were classified into the same ± 1 quartile and 7% into opposing quartiles by the two methods. Overall, our food frequency questionnaire showed good relative validity. We conclude that a single administration of a food frequency questionnaire is a valid tool for ranking women in accordance with their nutrient intakes during pregnancy. © 2013 The Authors Journal of Human Nutrition and Dietetics © 2013 The British Dietetic Association Ltd.

Reproducibility and relative validity of a semi-quantitative food-frequency questionnaire in an adult population of Rosario, Argentina

OpenAIRE

María Elisa Zapata; Romina Buffarini; Nadia Lingiardi; Ana Luiza Gonçalves-Soares

2016-01-01

Introduction: Dietary assessment of nutrients and food groups by food frequency questionnaire needs to be validated in each population. The objective of this cross-sectional study was to evaluate the reproducibility and relative validity of a semi-quantitative food frequency questionnaire among adults of Rosario, Argentina.Material and Methods: Two food frequency questionnaires and four 24-hour dietary recalls were applied in a sample of 88 adults. Reproducibility of food frequency questionna...

The Groningen Radiotherapy-Induced Xerostomia questionnaire : Development and validation of a new questionnaire

NARCIS (Netherlands)

Beetz, I.; Burlage, Fred; Bijl, H.P.; Chouvalova, Olga; Christianen, M.E.; Vissink, A.; van der Laan, B.F.; de Bock, G.H.; Langendijk, J.A.

2010-01-01

Purpose: The purpose of this study was to develop and validate a questionnaire (Groningen Radiotherapy-Induced Xerostomia (GRIX) questionnaire) that has the ability to distinguish between patient-rated xerostomia during day and night and can be used to evaluate the impact of emerging radiation

Measuring safety culture in Dutch primary care: psychometric characteristics of the SCOPE-PC questionnaire.

Science.gov (United States)

Verbakel, Natasha J; Zwart, Dorien L M; Langelaan, Maaike; Verheij, Theo J M; Wagner, Cordula

2013-09-17

Patient safety has been a priority in primary healthcare in the last years. The prevailing culture is seen as an important condition for patient safety in practice and several tools to measure patient safety culture have therefore been developed. Although Dutch primary care consists of different professions, such as general practice, dental care, dietetics, physiotherapy and midwifery, a safety culture questionnaire was only available for general practices. The purpose of this study was to modify and validate this existing questionnaire to a generic questionnaire for all professions in Dutch primary care. A validated Dutch questionnaire for general practices was modified to make it usable for all Dutch primary care professions. Subsequently, this questionnaire was administered to a random sample of 2400 practices from eleven primary care professions. The instrument's factor structure, reliability and validity were examined using confirmatory and explorative factor analyses. 921 questionnaires were returned. Of these, 615 were eligible for factor analysis. The resulting SCOPE-PC questionnaire consisted of seven dimensions: 'open communication and learning from errors', 'handover and teamwork', 'adequate procedures and working conditions', 'patient safety management', 'support and fellowship', 'intention to report events' and 'organisational learning' with a total of 41 items. All dimensions had good reliability with Cronbach's alphas ranging from 0.70-0.90, and the questionnaire had a good construct validity. The SCOPE-PC questionnaire has sound psychometric characteristics for use by the different professions in Dutch primary care to gain insight in their safety culture.

Psychometric Properties of the Problematic Internet Use Questionnaire Short-Form (PIUQ-SF-6) in a Nationally Representative Sample of Adolescents.

Science.gov (United States)

Demetrovics, Zsolt; Király, Orsolya; Koronczai, Beatrix; Griffiths, Mark D; Nagygyörgy, Katalin; Elekes, Zsuzsanna; Tamás, Domokos; Kun, Bernadette; Kökönyei, Gyöngyi; Urbán, Róbert

2016-01-01

Despite the large number of measurement tools developed to assess problematic Internet use, numerous studies use measures with only modest investigation into their psychometric properties. The goal of the present study was to validate the short (6-item) version of the Problematic Internet Use Questionnaire (PIUQ) on a nationally representative adolescent sample (n = 5,005; mean age 16.4 years, SD = 0.87) and to determine a statistically established cut-off value. Data were collected within the framework of the European School Survey Project on Alcohol and Other Drugs project. Results showed an acceptable fit of the original three-factor structure to the data. In addition, a MIMIC model was carried out to justify the need for three distinct factors. The sample was divided into users at-risk of problematic Internet use and those with no-risk using a latent profile analysis. Two latent classes were obtained with 14.4% of adolescents belonging to the at-risk group. Concurrent and convergent validity were tested by comparing the two groups across a number of variables (i.e., time spent online, academic achievement, self-esteem, depressive symptoms, and preferred online activities). Using the at-risk latent profile analysis class as the gold standard, a cut-off value of 15 (out of 30) was suggested based on sensitivity and specificity analyses. In conclusion, the brief version of the (6-item) PIUQ also appears to be an appropriate measure to differentiate between Internet users at risk of developing problematic Internet use and those not at risk. Furthermore, due to its brevity, the shortened PIUQ is advantageous to utilize within large-scale surveys assessing many different behaviors and/or constructs by reducing the overall number of survey questions, and as a consequence, likely increasing completion rates.

Psychometric Properties of the Problematic Internet Use Questionnaire Short-Form (PIUQ-SF-6) in a Nationally Representative Sample of Adolescents

Science.gov (United States)

Demetrovics, Zsolt; Király, Orsolya; Koronczai, Beatrix; Griffiths, Mark D.; Nagygyörgy, Katalin; Elekes, Zsuzsanna; Tamás, Domokos; Kun, Bernadette; Kökönyei, Gyöngyi; Urbán, Róbert

2016-01-01

Despite the large number of measurement tools developed to assess problematic Internet use, numerous studies use measures with only modest investigation into their psychometric properties. The goal of the present study was to validate the short (6-item) version of the Problematic Internet Use Questionnaire (PIUQ) on a nationally representative adolescent sample (n = 5,005; mean age 16.4 years, SD = 0.87) and to determine a statistically established cut-off value. Data were collected within the framework of the European School Survey Project on Alcohol and Other Drugs project. Results showed an acceptable fit of the original three-factor structure to the data. In addition, a MIMIC model was carried out to justify the need for three distinct factors. The sample was divided into users at-risk of problematic Internet use and those with no-risk using a latent profile analysis. Two latent classes were obtained with 14.4% of adolescents belonging to the at-risk group. Concurrent and convergent validity were tested by comparing the two groups across a number of variables (i.e., time spent online, academic achievement, self-esteem, depressive symptoms, and preferred online activities). Using the at-risk latent profile analysis class as the gold standard, a cut-off value of 15 (out of 30) was suggested based on sensitivity and specificity analyses. In conclusion, the brief version of the (6-item) PIUQ also appears to be an appropriate measure to differentiate between Internet users at risk of developing problematic Internet use and those not at risk. Furthermore, due to its brevity, the shortened PIUQ is advantageous to utilize within large-scale surveys assessing many different behaviors and/or constructs by reducing the overall number of survey questions, and as a consequence, likely increasing completion rates. PMID:27504915

Validation of a Spanish translation of the Gratitude Questionnaire (GQ-6) with a Chilean sample of adults and high schoolers.

Science.gov (United States)

Langer, Álvaro I; Ulloa, Valentina G; Aguilar-Parra, José M; Araya-Véliz, Claudio; Brito, Gonzalo

2016-03-31

Recent studies have associated positive emotions with several variables such as learning, coping strategies or assertive behaviour. The concept of gratitude has been specifically defined as a tendency to recognise and respond to people or situations with grateful emotion. Unfortunately in Latin America, no validated measures of gratitude on different populations are available. The aim of this study was to analyse the psychometric properties of the Gratitude Questionnaire (GQ-6) in two Chilean samples. Two studies were conducted: the first with 668 high school adolescents (390 women and 278 men, with ages ranging between 12 and 20, and a mean age 15.54 ± 1.22) and the second with 331 adults (231 women and 100 men, with an average age of 37.59 ± 12.6). An analysis of the psychometric properties of the GQ-6 scale to determine the validity and reliability of the instrument in Chilean adolescents and adults was performed. Bivariate correlations, multiple regression analyses, exploratory factor analysis (EFA) and Monte Carlo simulations were carried out. Finally, a confirmatory factor analysis (CFA) was performed. A single-factor solution was found in both studies, a 5 item version for the adolescents and 6 items for adults. This factorial solution was invariant across genders. Reliability of the GQ was adequate in both samples (using Cronbach's alpha coefficient). In addition convergent and discriminate validity were assessed. Additionally, a negative correlation between the GQ-5 and depression in adolescents and a positive correlation between the GQ-6 and happiness in adults was found. The GQ is a suitable measure for evaluating a person's disposition toward gratitude in Chilean adolescents and adults. This instrument may contribute to the advancement of the study of positive emotions in Latin America.

Psychometric Properties of the Problematic Internet Use Questionnaire Short-Form (PIUQ-SF-6 in a Nationally Representative Sample of Adolescents.

Directory of Open Access Journals (Sweden)

Zsolt Demetrovics

Full Text Available Despite the large number of measurement tools developed to assess problematic Internet use, numerous studies use measures with only modest investigation into their psychometric properties. The goal of the present study was to validate the short (6-item version of the Problematic Internet Use Questionnaire (PIUQ on a nationally representative adolescent sample (n = 5,005; mean age 16.4 years, SD = 0.87 and to determine a statistically established cut-off value. Data were collected within the framework of the European School Survey Project on Alcohol and Other Drugs project. Results showed an acceptable fit of the original three-factor structure to the data. In addition, a MIMIC model was carried out to justify the need for three distinct factors. The sample was divided into users at-risk of problematic Internet use and those with no-risk using a latent profile analysis. Two latent classes were obtained with 14.4% of adolescents belonging to the at-risk group. Concurrent and convergent validity were tested by comparing the two groups across a number of variables (i.e., time spent online, academic achievement, self-esteem, depressive symptoms, and preferred online activities. Using the at-risk latent profile analysis class as the gold standard, a cut-off value of 15 (out of 30 was suggested based on sensitivity and specificity analyses. In conclusion, the brief version of the (6-item PIUQ also appears to be an appropriate measure to differentiate between Internet users at risk of developing problematic Internet use and those not at risk. Furthermore, due to its brevity, the shortened PIUQ is advantageous to utilize within large-scale surveys assessing many different behaviors and/or constructs by reducing the overall number of survey questions, and as a consequence, likely increasing completion rates.

The Meal Pattern Questionnaire: A psychometric evaluation using the Eating Disorder Examination.

Science.gov (United States)

Alfonsson, S; Sewall, A; Lidholm, H; Hursti, T

2016-04-01

Meal pattern is an important variable in both obesity treatment and treatment for eating disorders. Momentary assessment and eating diaries are highly valid measurement methods but often cumbersome and not always feasible to use in clinical practice. The aim of this study was to design and evaluate a self-report instrument for measuring meal patterns. The Pattern of eating item from the Eating Disorder Examination (EDE) interview was adapted to self-report format to follow the same overall structure as the Eating Disorder Examination Questionnaire. The new instrument was named the Meal Patterns Questionnaire (MPQ) and was compared with the EDE in a student sample (n=105) and an obese sample (n=111). The individual items of the MPQ and the EDE showed moderate to high correlations (rho=.63-89) in the two samples. Significant differences between the MPQ and EDE were only found for two items in the obese sample. The total scores correlated to a high degree (rho=.87/.74) in both samples and no significant differences were found in this variable. The MPQ can provide an overall picture of a person's eating patterns and is a valid way to collect data regarding meal patterns. The MPQ may be a useable tool in clinical practice and research studies when more extensive instruments cannot be used. Future studies should evaluate the MPQ in diverse cultural populations and with more ecological assessment methods. Copyright © 2015 Elsevier Ltd. All rights reserved.

Factor structure of the Psychiatric Diagnostic Screening Questionnaire (PDSQ), a screening questionnaire for DSM-IV axis I disorders.

Science.gov (United States)

Sheeran, T; Zimmerman, M

2004-03-01

We examined the factor structure of the Psychiatric Diagnostic Screening Questionnaire (PDSQ), a 125-item self-report scale that screens for 15 of the most common Axis I psychiatric disorders for which patients seek treatment in outpatient settings. The sample consisted of 2440 psychiatric outpatients. Thirteen factors were extracted. Ten mapped directly onto the DSM-IV diagnosis for which they were designed and one represented suicidal ideation. The remaining two factors reflected closely related disorders: Panic Disorder/Agoraphobia, and Somatization/Hypochondriasis. A psychosis factor was not extracted. Overall, the factor structure of the PDSQ was consistent with the DSM-IV nosology upon which it was developed.

The Fear of Pain Questionnaire-III and the Fear of Pain Questionnaire-Short Form: a confirmatory factor analysis

DEFF Research Database (Denmark)

Vambheim, Sara M.; Lyby, Peter Solvoll; Aslaksen, Per M.

2017-01-01

.Aims and methods: The purpose of the study was to investigate the model fit, reliability and validity of the FPQ-III and the FPQ-SF in a Norwegian nonclinical sample, using confirmatory factor analysis (CFA). The second aim was to explore the model fit of the two scales in male and female subgroups separately...... the questionnaires, the model fit, validity and reliability were compared across sex using CFA.Results: The results revealed that both models' original factor structures had poor fit. However, the FPQ-SF had a better fit overall, compared to the FPQ-III. The model fit of the two models differed across sex...

The Dimensional Assessment of Personality Psychopathology Basic Questionnaire: shortened versions item analysis.

Science.gov (United States)

Aluja, Anton; Blanch, Àngel; Blanco, Eduardo; Martí-Guiu, Maite; Balada, Ferran

2015-01-13

This study has been designed to evaluate and replicate the psychometric properties of the Dimensional Assessment of Personality Psychopathology-Basic Questionnaire (DAPP-BQ) and the DAPP-BQ short form (DAPP-SF) in a large Spanish general population sample. Additionally, we have generated a reduced form called DAPP-90, using a strategy based on a structural equation modeling (SEM) methodology in two independent samples, a calibration and a validation sample. The DAPP-90 scales obtained a more satisfactory fit on SEM adjustment values (average: TLI > .97 and RMSEA assessment of patients in hospital consultation or in brief psychological assessments.

Measurement invariance of the Portrait Values Questionnaire across 25 European countries

DEFF Research Database (Denmark)

Scholderer, Joachim

The Portrait Values Questionnaire (PVQ) is tested for cross-cultural validity. Measurement characteristics are compared across representative consumer samples from 25 European countries (total N = 37,592) using multi-group confirmatory factor analysis with structured means. The results suggest....... Hence, most direct comparisons of PVQ raw scores and sample statistics between European countries are valid without correction. Furthermore, it can be concluded that the ten values measured by the PVQ are invariant across European countries in terms of their relative position on the quasi......-circumplex hypothesised by the theory of basic human values....

Validation of the Portuguese Severe Respiratory Insufficiency Questionnaire for home mechanically ventilated patients.

Science.gov (United States)

Ribeiro, C; Ferreira, D; Conde, S; Oliveira, P; Windisch, W

The aim of this study was to develop and validate the professional translation and cultural adaptation of the Portuguese Severe Respiratory Insufficiency (SRI) Questionnaire. The sample was composed of 93 patients (50 male patients, 53.8%) with a mean age of 66.3 years. The most frequent diagnostic groups were chronic obstructive pulmonary disease, obesity hypoventilation syndrome and restrictive chest wall disorders. The patients were asked to fill in both the SRI and SF-36 questionnaires. Factor analysis of the SRI questionnaire was performed leading to an explained variance of 73%, and resulted in 13 components. When analyzing the reliability, we obtained values for Cronbach's alpha above 0.70 for most subscales with the reliability of the summary scale being even higher (0.84). This professional translation and cultural adaptation of the Portuguese SRI Questionnaire has good psychometric properties which are similar, not only to the original, but also to other translations. These characteristics make this questionnaire applicable to the Portuguese population receiving home mechanical ventilation for severe respiratory insufficiency. Copyright © 2017 Sociedade Portuguesa de Pneumologia. Published by Elsevier España, S.L.U. All rights reserved.

Modeling the Test-Taking Motivation Construct through Investigation of Psychometric Properties of an Expectancy-Value-Based Questionnaire

Science.gov (United States)

Knekta, Eva; Eklöf, Hanna

2015-01-01

The aim of this study was to evaluate the psychometric properties of an expectancy-value-based questionnaire measuring five aspects of test-taking motivation (effort, expectancies, importance, interest, and test anxiety). The questionnaire was distributed to a sample of Swedish Grade 9 students taking a low-stakes (n = 1,047) or a high-stakes (n =…

Validity and Reliability of the Turkish Chronic Pain Acceptance Questionnaire

Directory of Open Access Journals (Sweden)

Hazel Ekin Akmaz

2018-05-01

Full Text Available Background: Pain acceptance is the process of giving up the struggle with pain and learning to live a worthwhile life despite it. In assessing patients with chronic pain in Turkey, making a diagnosis and tracking the effectiveness of treatment is done with scales that have been translated into Turkish. However, there is as yet no valid and reliable scale in Turkish to assess the acceptance of pain. Aims: To validate a Turkish version of the Chronic Pain Acceptance Questionnaire developed by McCracken and colleagues. Study Design: Methodological and cross sectional study. Methods: A simple randomized sampling method was used in selecting the study sample. The sample was composed of 201 patients, more than 10 times the number of items examined for validity and reliability in the study, which totaled 20. A patient identification form, the Chronic Pain Acceptance Questionnaire, and the Brief Pain Inventory were used to collect data. Data were collected by face-to-face interviews. In the validity testing, the content validity index was used to evaluate linguistic equivalence, content validity, construct validity, and expert views. In reliability testing of the scale, Cronbach’s α coefficient was calculated, and item analysis and split-test reliability methods were used. Principal component analysis and varimax rotation were used in factor analysis and to examine factor structure for construct concept validity. Results: The item analysis established that the scale, all items, and item-total correlations were satisfactory. The mean total score of the scale was 21.78. The internal consistency coefficient was 0.94, and the correlation between the two halves of the scale was 0.89. Conclusion: The Chronic Pain Acceptance Questionnaire, which is intended to be used in Turkey upon confirmation of its validity and reliability, is an evaluation instrument with sufficient validity and reliability, and it can be reliably used to examine patients’ acceptance

Confirmatory factor analysis and examination of the psychometric properties of the eating beliefs questionnaire

OpenAIRE

Burton, Amy L.; Hay, Phillipa; Kleitman, Sabina; Smith, Evelyn; Raman, Jayanthi; Swinbourne, Jessica; Touyz, Stephen W.; Abbott, Maree J.

2017-01-01

Background The Eating Beliefs Questionnaire (EBQ) is a 27-item self-report measure that assesses positive and negative beliefs about binge eating. It has been validated and its factor structure explored in a non-clinical sample. This study tested the psychometric properties of the EBQ in a clinical and a non-clinical sample. Method A sample of 769 participants (573 participants recruited from the university and general community, 76 seeking treatment for an eating disorder and 120 participati...

A questionnaire for screening the micronutrient intake of economically active South African adults.

Science.gov (United States)

Senekal, Marjanne; Steyn, Nelia P; Nel, Johanna

2009-11-01

The aim of the present study was to develop (phase 1) and validate (phase 2) a screening questionnaire to assess the adequacy of micronutrient intake of economically active South African adults. For identification of indicator foods to be included in the screening questionnaire (phase 1), a comprehensive, eighty-six-item, quantified FFQ that reflected the food sources of thirteen selected micronutrients associated with the nutrition-related health status of South Africans was developed and completed by 554 adults of all four major ethnic groups. Resulting dietary data were subjected to stepwise regression analyses to identify indicator foods to be included in the final screening questionnaire. For validation of frequency of intake reporting of specific food items included in the screening questionnaire (phase 2), a sample of sixty-six African and eighty-four white adult volunteers of both genders completed a 7 d record as well as the screening questionnaire. The frequency of intake of specific food items derived from the two methods was then compared using Spearman correlation coefficients. Phase 1 identified thirty indicator foods that formed the basis of the screening questionnaire. In phase 2, significant correlations were found for the total group for twenty-two out of the thirty items in the questionnaire, with correlations being the best for white females and the poorest for African males and females. A screening questionnaire (thirty-item FFQ) that can be used by researchers and health professionals to assess an individual's risk of inadequate micronutrient intake was developed and validated.

Assessing Psychological Inflexibility: The Psychometric Properties of the Avoidance and Fusion Questionnaire for Youth in Two Adult Samples

Science.gov (United States)

Fergus, Thomas A.; Valentiner, David P.; Gillen, Michael J.; Hiraoka, Regina; Twohig, Michael P.; Abramowitz, Jonathan S.; McGrath, Patrick B.

2012-01-01

The current study examined whether the Avoidance and Fusion Questionnaire for Youth (AFQ-Y; L. A. Greco, W. Lambert, & R. A. Baer, 2008), a self-report measure of psychological inflexibility for children and adolescents, might be useful for measuring psychological inflexibility for adults. The psychometric properties of the AFQ-Y were examined…

The MPC and A Questionnaire

International Nuclear Information System (INIS)

Powell, Danny H.; Elwood, Robert H. Jr.

2011-01-01

The questionnaire is the instrument used for recording performance data on the nuclear material protection, control, and accountability (MPC and A) system at a nuclear facility. The performance information provides a basis for evaluating the effectiveness of the MPC and A system. The goal for the questionnaire is to provide an accurate representation of the performance of the MPC and A system as it currently exists in the facility. Performance grades for all basic MPC and A functions should realistically reflect the actual level of performance at the time the survey is conducted. The questionnaire was developed after testing and benchmarking the material control and accountability (MC and A) system effectiveness tool (MSET) in the United States. The benchmarking exercise at the Idaho National Laboratory (INL) proved extremely valuable for improving the content and quality of the early versions of the questionnaire. Members of the INL benchmark team identified many areas of the questionnaire where questions should be clarified and areas where additional questions should be incorporated. The questionnaire addresses all elements of the MC and A system. Specific parts pertain to the foundation for the facility's overall MPC and A system, and other parts pertain to the specific functions of the operational MPC and A system. The questionnaire includes performance metrics for each of the basic functions or tasks performed in the operational MPC and A system. All of those basic functions or tasks are represented as basic events in the MPC and A fault tree. Performance metrics are to be used during completion of the questionnaire to report what is actually being done in relation to what should be done in the performance of MPC and A functions.