2005 wood harvests in France - a definite recovery for timber and dendro-energy

International Nuclear Information System (INIS)

Cinotti, B.

2007-01-01

After dropping to 32.8 million m 3 in 2003, sales of wood harvests continue the recovery that began in 2004 and have reached 37.2 million m 3 (+ 5%) i.e., slightly more than the level reached prior to the 1999 storms (36.9 million m 3 ). Workable timber sales have increased by 5.9% up to 22.1 million m 3 but are nonetheless 4.5% below their 1999 level (23.2 million m 3 ). Industrial round-wood harvests have remained stable at 12.2 million m 3 (of which 11.8 are pulpwood). Sales of firewood have increased 23% (2.9 million m 3 ). Pre-tax roadside value of the entire wood harvest is estimated to be 1.64 billion Euro. French production of sawing timber is 9.7 million cubic metres with sawn softwood timber stagnating (+ 0.5%) and a drop in sawn hardwood timber (- 4.6%). The effects of the storms at the end of 1999 on the business cycle are no longer perceptible. Their consequences on the structure of harvests and of businesses are beginning to be understood. Average wood prices increased considerably in 2005 and 2006. These rosier market conditions for unprocessed timber could be an opportunity to continue with restructuring of the sector, in particular so as to further streamline harvests and narrow the wide gap between loggable and actually logged volumes, as well as to review the distribution of added value between the various players in the forest-based industries. (authors)

Modeling the complex impacts of timber harvests to find optimal management regimes for Amazon tidal floodplain forests

Science.gov (United States)

Fortini, Lucas B.; Cropper, Wendell P.; Zarin, Daniel J.

2015-01-01

At the Amazon estuary, the oldest logging frontier in the Amazon, no studies have comprehensively explored the potential long-term population and yield consequences of multiple timber harvests over time. Matrix population modeling is one way to simulate long-term impacts of tree harvests, but this approach has often ignored common impacts of tree harvests including incidental damage, changes in post-harvest demography, shifts in the distribution of merchantable trees, and shifts in stand composition. We designed a matrix-based forest management model that incorporates these harvest-related impacts so resulting simulations reflect forest stand dynamics under repeated timber harvests as well as the realities of local smallholder timber management systems. Using a wide range of values for management criteria (e.g., length of cutting cycle, minimum cut diameter), we projected the long-term population dynamics and yields of hundreds of timber management regimes in the Amazon estuary, where small-scale, unmechanized logging is an important economic activity. These results were then compared to find optimal stand-level and species-specific sustainable timber management (STM) regimes using a set of timber yield and population growth indicators. Prospects for STM in Amazonian tidal floodplain forests are better than for many other tropical forests. However, generally high stock recovery rates between harvests are due to the comparatively high projected mean annualized yields from fast-growing species that effectively counterbalance the projected yield declines from other species. For Amazonian tidal floodplain forests, national management guidelines provide neither the highest yields nor the highest sustained population growth for species under management. Our research shows that management guidelines specific to a region’s ecological settings can be further refined to consider differences in species demographic responses to repeated harvests. In principle, such fine

Effects of timber harvest on aquatic vertebrates and habitat in the North Fork Caspar Creek

Science.gov (United States)

Rodney J. Nakamoto

1998-01-01

I examined the relationships between timber harvest, creek habitat, and vertebrate populations in the North and South forks of Caspar Creek. Habitat inventories suggested pool availability increased after the onset of timber harvest activities. Increased large woody debris in the channel was associated with an increase in the frequency of blowdown in the riparian...

Estimating and validating ground-based timber harvesting production through computer simulation

Science.gov (United States)

Jingxin Wang; Chris B. LeDoux

2003-01-01

Estimating ground-based timber harvesting systems production with an object oriented methodology was investigated. The estimation model developed generates stands of trees, simulates chain saw, drive-to-tree feller-buncher, swing-to-tree single-grip harvester felling, and grapple skidder and forwarder extraction activities, and analyzes costs and productivity. It also...

Impact of professional foresters on timber harvests on West Virginia nonindustrial private forests

Science.gov (United States)

Stuart A. Moss; Eric. Heitzman

2013-01-01

Timber harvests conducted on 90 nonindustrial private forest properties in West Virginia were investigated to determine the effects that professional foresters have on harvest and residual stand attributes. Harvests were classified based on the type of forester involved: (1) consulting/state service foresters representing landowners, (2) industry foresters representing...

36 CFR 223.201 - Limitations on unprocessed timber harvested in Alaska.

Science.gov (United States)

2010-07-01

... Conservation and Shortage Relief Act of 1990 Program § 223.201 Limitations on unprocessed timber harvested in... or serious deterioration of logs unsalable locally because of an unforeseen loss of market, (c...

Building aggregate timber supply models from individual harvest choice

Science.gov (United States)

Maksym Polyakov; David N. Wear; Robert Huggett

2009-01-01

Timber supply has traditionally been modelled using aggregate data. In this paper, we build aggregate supply models for four roundwood products for the US state of North Carolina from a stand-level harvest choice model applied to detailed forest inventory. The simulated elasticities of pulpwood supply are much lower than reported by previous studies. Cross price...

The Four Corners timber harvest and forest products industry, 2007

Science.gov (United States)

Steven W. Hayes; Todd A. Morgan; Erik C. Berg; Jean M. Daniels; Mike Thompson

2012-01-01

This report traces the flow of timber harvested in the "Four Corners" States (Arizona, Colorado, New Mexico, and Utah) during calendar year 2007, describes the composition and operations of the region's primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as...

Managing the forest for more than the trees: effects of experimental timber harvest on forest Lepidoptera.

Science.gov (United States)

Summerville, Keith S

2011-04-01

Studies of the effects of timber harvest on forest insect communities have rarely considered how disturbance from a range of harvest levels interacts with temporal variation in species diversity to affect community resistance to change. Here I report the results of a landscape-scale, before-and-after, treatment-control experiment designed to test how communities of forest Lepidoptera experience (1) changes in species richness and composition and (2) shifts in species dominance one year after logging. I sampled Lepidoptera from 20 forest stands allocated to three harvest treatments (control, even-aged shelterwood or clearcuts, and uneven-aged group selection cuts) within three watersheds at Morgan-Monroe State Forest, Indiana, USA. Moths were sampled from all forest stands one year prior to harvest in 2007 and immediately post-harvest in 2009. Species composition was most significantly affected by temporal variation between years, although uneven-aged management also caused significant changes in lepidopteran community structure. Furthermore, species richness of Lepidoptera was higher in 2007 compared to 2009 across all watersheds and forest stands. The decrease in species richness between years, however, was much larger in even-aged and uneven-aged management units compared to the control. Furthermore, matrix stands within the even-aged management unit demonstrated the highest resistance to species loss within any management unit. Species dominance was highly resistant to effects of timber harvest, with pre- and post-harvest values for Simpson diversity nearly invariant. Counter to prediction, however, the suite of dominant taxa differed dramatically among the three management units post-harvest. My results suggest that temporal variation may have strong interactions with timber harvest, precipitating loss of nearly 50% species richness from managed stands regardless of harvest level. Even-aged management, however, appeared to leave the smallest "footprint" on moth

Timber-harvest clearcutting and nutrients in the Northeastern United States

Science.gov (United States)

K. G. Reinhart

1973-01-01

The effect of ecosystem disturbance on nutrients in the system has been receiving widespread attention. An appraisal of research results in the Northeast indicates that timber-harvest clearcutting has not increased nutrient levels sufficiently to reduce water quality below drinking water standards. Losses of nutrients from clearcuttings in New Hampshire over a 2-year...

Browsing Patterns of White-Tailed Deer Following Increased Timber Harvest and a Decline in Population Density

Directory of Open Access Journals (Sweden)

Shawn M. Crimmins

2010-01-01

Full Text Available We examined browsing patterns of white-tailed deer (Odocoileus virginianus on a site in the central Appalachians that experienced a substantial (>50% reduction in deer population density and an increase in the amount of timber harvest since 2001. We sampled woody browse in and immediately adjacent to 12 clearcuts ranging in age from 0–5 years postharvest in summer 2007. Clearcut-interior areas had higher woody browse abundance and browsing rates than clearcut-edge or mature forest areas. Woody browse abundance was slightly higher within individual clearcuts than in 2001 at higher population densities and lower timber harvest rates. Overall browsing rates declined from approximately 17% in 2001 to less than 5% during our study, suggesting that the combination of deer population control, and increasing the amount of timber harvest across the landscape can reduce herbivory to levels that may not impede growth and survival of forest vegetation.

Effects of timber harvest following wildfire in western North America

Science.gov (United States)

David L. Peterson; James K. Agee; Gregory H. Aplet; Dennis P. Dykstra; Russell T. Graham; John F. Lehmkuhl; David S. Pilliod; Donald F. Potts; Robert F. Powers; John D. Stuart

2009-01-01

Timber harvest following wildfire leads to different outcomes depending on the biophysical setting of the forest, pattern of burn severity, operational aspects of tree removal, and other management activities. Fire effects range from relatively minor, in which fire burns through the understory and may kill a few trees, to severe, in which fire kills most trees and...

A computer-based time study system for timber harvesting operations

Science.gov (United States)

Jingxin Wang; Joe McNeel; John Baumgras

2003-01-01

A computer-based time study system was developed for timber harvesting operations. Object-oriented techniques were used to model and design the system. The front-end of the time study system resides on the MS Windows CE and the back-end is supported by MS Access. The system consists of three major components: a handheld system, data transfer interface, and data storage...

The Four Corners timber harvest and forest products industry, 2012

Science.gov (United States)

Colin B. Sorenson; Steven W. Hayes; Todd A. Morgan; Eric A. Simmons; Micah G. Scudder; Chelsea P. McIver; Mike T. Thompson

2016-01-01

This report traces the flow of timber harvested in the "Four Corners" States (Arizona, Colorado, New Mexico, and Utah) during calendar year 2012, describes the composition and operations of the region’s primary forest products industry, and quantifies volumes and uses of wood fiber. Recent changes in the wood products industry are discussed, as well as trends...

Noise, Worker Perception, and Worker Concentration in Timber Harvesting Activity

Directory of Open Access Journals (Sweden)

Efi Yuliati Yovi

2012-01-01

Full Text Available Timber harvesting activities are unquestionably related with high risk of work accidents and health disorders.Such activities were not only burdened the workers with heavy physical workloads due to uneasy workingenvironment, and massive work materials and tools, but also physiopsychologically burdened workers as theywere imposed with both mechanical and acoustic vibrations (noise produced by the chainsaw. However,  it is acommon practice that most of the workers still ignored the importance of the use of noise reduction devices suchas earmuff or ear plug.  This study was aimed to reveal the factual effects of noise on work concentration of theworkers to provide a scientific basis in supporting efforts in improving workers’ attitude.  The results confirmedthat chainsaw might produce noise during operation.  Noise intensities received by both right and left ears werenot significantly different, indicating that left-handed and normal workers received similar degree of noise inboth side of ears. Further, results also showed that there was a significant difference on the perception and workconcentration of chainsaw operators versus sedentary people to the noise.  These findings proved that hearingability of chainsaw operators had declined due to frequent noise exposure.Keywords: timber harvesting, physio-psychological disorder, noise, chainsaw

Considering departures from current timber harvesting policies: case studies of four communities in the Pacific Northwest.

Science.gov (United States)

Con H Schallau; Paul E. Polzin

1983-01-01

U.S. Department of Agriculture regulations permit departures from current National Forest timber harvesting policies when "implementation of base harvest schedules.., would cause a substantial adverse impact upon a community .... " This paper describes the kinds of information needed for forest managers to adequately assess the relevance of the departure...

Effects of timber harvest on phlebotomine sand flies (Diptera: Psychodidae in a production forest: abundance of species on tree trunks and prevalence of trypanosomatids

Directory of Open Access Journals (Sweden)

Felipe Arley Costa Pessoa

2007-08-01

Full Text Available The Amazon forest is being exploited for timber production. The harvest removes trees, used by sand flies as resting sites, and decreases the canopy, used as refuges by some hosts. The present study evaluated the impact of the timber harvest, the abundance of sand flies, and their trypanosomatid infection rates before and after selective logging. The study was accomplished in terra-firme production forest in an area of timber harvest, state of Amazonas, Brazil. Sand fly catches were carried out in three areas: one before and after the timber harvest, and two control areas, a nature preservation area and a previously exploited area. The flies were caught by aspiration on tree trunks. Samples of sand flies were dissected for parasitological examination. In the site that suffered a harvest, a larger number of individuals was caught before the selective extraction of timber, showing significant difference in relation to the number of individuals and their flagellate infection rates after the logging. The other two areas did not show differences among their sand fly populations. This fact is suggestive of a fauna sensitive to the environmental alterations associated with selective logging.

Effects of group-selection timber harvest in bottomland hardwoods on fall migrant birds

Science.gov (United States)

John C. Kilgo; Karl V. Miller; Winston P. Smith

1999-01-01

Due to projected demands for hardwood timber, development of silvicultural practices that provide for adequate regeneration in southeastern bottomland hardwoods without causing undue harm to wildlife resources is critical. Group-selection silviculture involves harvesting a small group of trees, which creates a canopy gap (usually

Profitability of timber harvesting and timber transportation enterprises

International Nuclear Information System (INIS)

Rajamaeki, J.

1996-01-01

In co-operation with the major companies contracting out forestry work and Statistics Finland, Metsaeteho carried out a project with the objective of analysing the economic profitability of timber harvesting and transportation enterprises in 1994. The calculation of profitability was based on utilisation of last livelihoods taxation data (EVR) that Statistics Finland was in possession of. The basic material comprised data that the companies contracting out forestry work had full-time entrepreneurs. There were 255 forestry machine contractor enterprises and 270 trucking enterprises. Statistics Finland was responsible for computations of the results of the project. The calculation of the indicators of profitability was based on the recommendations of Yritystutkimusneuvottelukunta, a committee looking into the functioning of enterprises. The year 1994 was a good year from the viewpoint of profitability of both forestry machine contractors as well as trucking enterprises. With full depreciations and salary adjustments attended to, both enterprise groups still showed a mean profitability of ca. 8 %. The yield of invested capital was ca. 25 %. The differences in profitability among enterprises were great in both groups and in different parts of the country

Utilization of Oregon’s timber harvest and associated direct economic effects.

Science.gov (United States)

Krista M. Gebert; Charles E. Keegan; Sue Willits; Al. Chase

2002-01-01

With more than 16 million acres of commercial timberland, Oregon’s forest products industry is an important part of Oregon’s economy and a major player in the Nation’s wood products market. Despite declining production over the last decade, in 1998 Oregon was still the leading producer of softwood lumber and plywood in the United States, and the timber harvested in...

Productivity assessment of timber harvesting techniques for supporting sustainable forest management of secondary Atlantic Forests in southern Brazil

Directory of Open Access Journals (Sweden)

Pedro Caldas Britto

2017-12-01

Full Text Available The Atlantic Forest in southern Brazil has been subject to overexploitation in the past prompting the formulation of a rigorous conservation orientated policy by the government including a strict ban of timber harvesting. In the region, the forestland is owned by farmers. The economic value of the forest is rather limited for those farmers, because of the prohibition of commercial timber harvesting as a source of income. Sustainable forest management systems can offer great potential as new income opportunities for land holders, and further actively support the process of ecosystem rehabilitation and protection for these ecosystems. Yet, successful implementation of such sustainable management systems requires feasible and adapted timber harvesting systems. In order to develop such harvesting systems, a regional comparative case study was conducted at a typical smallholder forestry venture with the objective to analyze and evaluate harvesting methods supporting sustainable management of the Atlantic Forest. This study assessed production rates and associated costs of a common conventional timber harvesting method (CM and a proposed alternative method (AM. CM was performed by a selected, typical forest landowner who had only basic training in chainsaw operations, but 20 years of experience at the wood yard of his small sawmill. In contrast, the AM employed a professional chainsaw operator from the Amazon forest, trained and experienced in reduced impact logging techniques using state of the art equipment, supplemented by a snatch block and a skidding cone for improved extraction. Time study based models identified tree volume, winching distance and skidding distance to the landing as the most significant independent variables affecting productivity. Total net productivity ranged from 4.9 m³ PMH0-1 for CM to 3.1 m³ PMH0-1 for AM. Corresponding gross-productivity ranged from 3.0 m³ SMH-1 to 1.9 m³ SMH-1 with an overall mean utilization rate of

Evaluating carbon storage, timber harvest, and habitat possibilities for a Western Cascades (USA) forest landscape.

Science.gov (United States)

Kline, Jeffrey D; Harmon, Mark E; Spies, Thomas A; Morzillo, Anita T; Pabst, Robert J; McComb, Brenda C; Schnekenburger, Frank; Olsen, Keith A; Csuti, Blair; Vogeler, Jody C

2016-10-01

Forest policymakers and managers have long sought ways to evaluate the capability of forest landscapes to jointly produce timber, habitat, and other ecosystem services in response to forest management. Currently, carbon is of particular interest as policies for increasing carbon storage on federal lands are being proposed. However, a challenge in joint production analysis of forest management is adequately representing ecological conditions and processes that influence joint production relationships. We used simulation models of vegetation structure, forest sector carbon, and potential wildlife habitat to characterize landscape-level joint production possibilities for carbon storage, timber harvest, and habitat for seven wildlife species across a range of forest management regimes. We sought to (1) characterize the general relationships of production possibilities for combinations of carbon storage, timber, and habitat, and (2) identify management variables that most influence joint production relationships. Our 160 000-ha study landscape featured environmental conditions typical of forests in the Western Cascade Mountains of Oregon (USA). Our results indicate that managing forests for carbon storage involves trade-offs among timber harvest and habitat for focal wildlife species, depending on the disturbance interval and utilization intensity followed. Joint production possibilities for wildlife species varied in shape, ranging from competitive to complementary to compound, reflecting niche breadth and habitat component needs of species examined. Managing Pacific Northwest forests to store forest sector carbon can be roughly complementary with habitat for Northern Spotted Owl, Olive-sided Flycatcher, and red tree vole. However, managing forests to increase carbon storage potentially can be competitive with timber production and habitat for Pacific marten, Pileated Woodpecker, and Western Bluebird, depending on the disturbance interval and harvest intensity chosen

Timber harvest as the predominant disturbance regime in northeastern U.S. forests: Effects of harvest intensification

Science.gov (United States)

Brown, Michelle L.; Canham, Charles D.; Murphy, Lora; Donovan, Therese M.

2018-01-01

Harvesting is the leading cause of adult tree mortality in forests of the northeastern United States. While current rates of timber harvest are generally sustainable, there is considerable pressure to increase the contribution of forest biomass to meet renewable energy goals. We estimated current harvest regimes for different forest types and regions across the U.S. states of New York, Vermont, New Hampshire, and Maine using data from the U.S. Forest Inventory and Analysis Program. We implemented the harvest regimes in SORTIE‐ND, an individual‐based model of forest dynamics, and simulated the effects of current harvest regimes and five additional harvest scenarios that varied by harvest frequency and intensity over 150 yr. The best statistical model for the harvest regime described the annual probability of harvest as a function of forest type/region, total plot basal area, and distance to the nearest improved road. Forests were predicted to increase in adult aboveground biomass in all harvest scenarios in all forest type and region combinations. The magnitude of the increase, however, varied dramatically—increasing from 3% to 120% above current landscape averages as harvest frequency and intensity decreased. The variation can be largely explained by the disproportionately high harvest rates estimated for Maine as compared with the rest of the region. Despite steady biomass accumulation across the landscape, stands that exhibited old‐growth characteristics (defined as ≥300 metric tons of biomass/hectare) were rare (8% or less of stands). Intensified harvest regimes had little effect on species composition due to widespread partial harvesting in all scenarios, resulting in dominance by late‐successional species over time. Our analyses indicate that forest biomass can represent a sustainable, if small, component of renewable energy portfolios in the region, although there are tradeoffs between carbon sequestration in forest biomass and sustainable

Erosion and soil displacement related to timber harvesting in northwestern California, U.S.A.

Science.gov (United States)

R.M. Rice; D.J. Furbish

1984-01-01

The relationship between measures of site disturbance and erosion resulting from timber harvest was studied by regression analyses. None of the 12 regression models developed and tested yielded a coefficient of determination (R2) greater than 0.60. The results indicated that the poor fits to the data were due, in part, to unexplained qualitative...

Potential effects of timber harvest and water management on streamflow dynamics and sediment transport

Science.gov (United States)

C. A. Troendle; W. K. Olsen

1994-01-01

The sustainability of aquatic and riparian ecological systems is strongly tied to the dynamics of the streamflow regime. Timber harvest can influence the flow regime by increasing total flow, altering peak discharge rate, and changing the duration of flows of differing frequency of occurrence. These changes in the energy and sediment transporting capability of the...

Overview of approaches to sustain forest productivity during forest road development and timber harvesting activities

Science.gov (United States)

Charles R. Blinn; Rick Dahlamn; James A. Mattson; Michael A. Thompson

1999-01-01

Various approaches are available to minimize impacts on forest productivity during forest road building and timber harvesting activities. These approaches include a variety of practices and technologies. They include practices such as reducing road and trail development, using designated trails, and leaving slash at the stump on nutrient deficient sites. Technology...

Biogeography and organic matter removal shape long-term effects of timber harvesting on forest soil microbial communities.

Science.gov (United States)

Wilhelm, Roland C; Cardenas, Erick; Maas, Kendra R; Leung, Hilary; McNeil, Larisa; Berch, Shannon; Chapman, William; Hope, Graeme; Kranabetter, J M; Dubé, Stephane; Busse, Matt; Fleming, Robert; Hazlett, Paul; Webster, Kara L; Morris, David; Scott, D Andrew; Mohn, William W

2017-11-01

The growing demand for renewable, carbon-neutral materials and energy is leading to intensified forest land-use. The long-term ecological challenges associated with maintaining soil fertility in managed forests are not yet known, in part due to the complexity of soil microbial communities and the heterogeneity of forest soils. This study determined the long-term effects of timber harvesting, accompanied by varied organic matter (OM) removal, on bacterial and fungal soil populations in 11- to 17-year-old reforested coniferous plantations at 18 sites across North America. Analysis of highly replicated 16 S rRNA gene and ITS region pyrotag libraries and shotgun metagenomes demonstrated consistent changes in microbial communities in harvested plots that included the expansion of desiccation- and heat-tolerant organisms and decline in diversity of ectomycorrhizal fungi. However, the majority of taxa, including the most abundant and cosmopolitan groups, were unaffected by harvesting. Shifts in microbial populations that corresponded to increased temperature and soil dryness were moderated by OM retention, which also selected for sub-populations of fungal decomposers. Biogeographical differences in the distribution of taxa as well as local edaphic and environmental conditions produced substantial variation in the effects of harvesting. This extensive molecular-based investigation of forest soil advances our understanding of forest disturbance and lays the foundation for monitoring long-term impacts of timber harvesting.

Oregon’s forest products industry and timber harvest, 2008: industry trends and impacts of the Great Recession through 2010

Science.gov (United States)

Charles B. Gale; Charles E. Keegan; Erik C. Berg; Jean Daniels; Glenn A. Christensen; Colin B. Sorenson; Todd A. Morgan; Paul. Polzin

2012-01-01

This report traces the flow of Oregon’s 2008 timber harvest through the primary timber processing industry and provides a description of the structure, operation, and condition of Oregon’s forest products industry as a whole. It is the second in a series of reports that update the status of the industry every 5 years. Based on a census conducted in 2009 and 2010, we...

Influence of timber harvesting costs on the layout of cuttings and economic return in forest planning based on dynamic treatment units

Directory of Open Access Journals (Sweden)

Adrián Pascual

2018-05-01

Full Text Available Aim of study: To analyze the influence of harvesting costs on the distribution and type of cuttings when forest management planning is based on the dynamic treatment units (DTUs approach. Area of study: A Mediterranean pine forest in Central Spain. Materials and methods: Airborne laser scanning data were used in area-based approach to predict stand attributes and delineate segments that were used as calculation units. Predicted stand attributes and existing models for diameter distribution and individual-tree growth were used to simulate alternative management schedules for each segment for a 60-year planning horizon divided into three 20-year periods. Three alternative forest planning problems were formulated. They aimed to maximize or minimize net income, or maximize timber production with a constant flow of harvested timber. Spatial goals were used in all cases to enhance the clustering of treatments. Main results: Maxizing timber production without considering harvesting costs can be costly, even close to the plan that minimized net incomes. Maximizing net incomes led to frequent use of final felling instead of thinnings, placing cuttings near forest roads and creating more compact DTUs than obtained in the plan that maximized timber production. Research highlights: Compared to previous studies on DTUs, this study integrated felling and forwarding costs, which depended on distance to road and stand attributes, in the process of creating DTUs by means of spatial optimization.

Effects of Timber Harvesting with Best Management Practices on Ecosystem Metabolism of a Low Gradient Stream on the United States Gulf Coastal Plain

Directory of Open Access Journals (Sweden)

Abram DaSilva

2013-06-01

Full Text Available Stream metabolism can be used as a measure of freshwater ecosystem health because of its responsiveness to natural and anthropogenic changes. In this study, we used stream metabolic rates to test for the effects of a timber harvest with Louisiana’s current best management practices (BMPs. The study was conducted from 2006 to 2010 in a loblolly pine (Pinus taeda stand in north-central Louisiana, USA, 45 ha of which was clear cut harvested in the summer of 2007. Dissolved oxygen (DO, water temperature, and stream depth were recorded at a site upstream (serving as a reference and a site downstream of the harvested area. Using diurnal DO change and an open-system, single-station method at each site, we quantified rates of net ecosystem productivity (NEP, gross primary productivity (GPP, community respiration (CR, and the GPP/CR ratio. The system was predominately heterotrophic, with a GPP/CR ratio of less than one for 82% of the time at the upstream site. No calculated metabolic rate was significantly changed by the timber harvest (two-way ANOVA with interaction; p < 0.001. Overall, the results suggest that timber harvests of similar intensity with Louisiana’s current BMPs may not significantly impact stream biological conditions.

Avian response to timber harvesting applied experimentally to manage Cerulean Warbler breeding populations

Science.gov (United States)

Sheehan, James; Wood, Petra Bohall; Buehler, David A.; Keyser, Patrick D.; Larkin, Jeffrey L.; Rodewald, Amanda D.; Wigley, T. Bently; Boves, Than J.; George, Gregory A.; Bakermans, Marja H.; Beachy, Tiffany A.; Evans, Andrea; McDermott, Molly E.; Newell, Felicity L.; Perkins, Kelly A.; White, Matthew

2014-01-01

Timber harvesting has been proposed as a management tool to enhance breeding habitat for the Cerulean Warbler (Setophaga cerulea), a declining Neotropical–Nearctic migratory songbird that nests in the canopy of mature eastern deciduous forests. To evaluate how this single-species management focus might fit within an ecologically based management approach for multiple forest birds, we performed a manipulative experiment using four treatments (three intensities of timber harvests and an unharvested control) at each of seven study areas within the core Cerulean Warbler breeding range. We collected pre-harvest (one year) and post-harvest (four years) data on the territory density of Cerulean Warblers and six additional focal species, avian community relative abundance, and several key habitat variables. We evaluated the avian and habitat responses across the 3–32 m2 ha−1 residual basal area (RBA) range of the treatments. Cerulean Warbler territory density peaked with medium RBA (∼16 m2 ha−1). In contrast, territory densities of the other focal species were negatively related to RBA (e.g., Hooded Warbler [Setophaga citrina]), were positively related to RBA (e.g., Ovenbird [Seiurus aurocapilla]), or were not sensitive to this measure (Scarlet Tanager [Piranga olivacea]). Some species (e.g., Hooded Warbler) increased with time post-treatment and were likely tied to a developing understory, whereas declines (e.g., Ovenbird) were immediate. Relative abundance responses of additional species were consistent with the territory density responses of the focal species. Across the RBA gradient, greatest separation in the avian community was between early successional forest species (e.g., Yellow-breasted Chat [Icteria virens]) and closed-canopy mature forest species (e.g., Ovenbird), with the Cerulean Warbler and other species located intermediate to these two extremes. Overall, our results suggest that harvests within 10–20 m2 ha−1 RBA yield the largest

Assessment of Streamside Management Zones for Conserving Benthic Macroinvertebrate Communities Following Timber Harvest in Eastern Kentucky Headwater Catchments

Directory of Open Access Journals (Sweden)

Joshua K. Adkins

2016-06-01

Full Text Available Headwater streams generally comprise the majority of stream area in a watershed and can have a strong influence on downstream food webs. Our objective was to determine the effect of altering streamside management zone (SMZ configurations on headwater aquatic insect communities. Timber harvests were implemented within six watersheds in eastern Kentucky. The SMZ configurations varied in width, canopy retention and best management practice (BMP utilization at the watershed scale. Benthic macroinvertebrate samples collected one year before and four years after harvest indicated few differences among treatments, although post-treatment abundance was elevated in some of the treatment streams relative to the unharvested controls. Jaccard index values were similar across SMZ treatments after logging, indicating strong community overlap. These findings suggest that stream invertebrate communities did respond to the timber harvest, though not negatively. Results also suggest that SMZ criteria for aquatic habitats in steeply sloping topography, including at least 50 percent canopy retention and widths of at least 16.8 m, appear to be adequate for protecting benthic macroinvertebrate communities from logging impacts.

Legal distinction between employee and independent contractor as applied to collective bargaining activities in timber harvesting

Science.gov (United States)

James E. Granskog; William C. Siegal

1977-01-01

Collective bargaining attempts by timber harvesting labor groups is often complicated by lack of a clear legal distinction between "employees" and "independent contractors." the primary criterion to make the distinction - the "right-to-control" test of common law - has now been amplified by a number of secondary tests, including: 1) the...

Impacts of timber harvesting on soil organic matter, nitrogen, productivity, and health of inland northwest forests

Science.gov (United States)

M. F. Jurgensen; A. E. Harvey; R. T. Graham; D. S. Page-Dumroese; J. R. Tonn; M. J. Larsen; T. B. Jain

1997-01-01

Soil organic components are important factors in the health and productivity of Inland Northwest forests. Timber harvesting and extensive site preparation (piling, windrowing, or scalping) reduces the amount of surface organic material (woody residues and forest floor layers) over large areas. Some wildfires and severe prescribed burns can have similar consequences....

Timber salvage economics

Science.gov (United States)

Jeffrey P. Prestemon; Thomas P. Holmes

2008-01-01

Timber salvage is commonly done following natural disturbances, to recover some value from damaged forests. Decision making about salvage, however, is affected by ownership objectives, the nature of the damage agent, site factors, and the strength of the local timber market. For profit-maximizing landowners, salvage decisions must balance the cost of harvesting...

Forest bat population dynamics over 14 years at a climate refuge: Effects of timber harvesting and weather extremes.

Science.gov (United States)

Law, Bradley S; Chidel, Mark; Law, Peter R

2018-01-01

Long-term data are needed to explore the interaction of weather extremes with habitat alteration; in particular, can 'refugia' buffer population dynamics against climate change and are they robust to disturbances such as timber harvesting. Because forest bats are good indicators of ecosystem health, we used 14 years (1999-2012) of mark-recapture data from a suite of small tree-hollow roosting bats to estimate survival, abundance and body condition in harvested and unharvested forest and over extreme El Niño and La Niña weather events in southeastern Australia. Trapping was replicated within an experimental forest, located in a climate refuge, with different timber harvesting treatments. We trapped foraging bats and banded 3043 with a 32% retrap rate. Mark-recapture analyses allowed for dependence of survival on time, species, sex, logging treatment and for transients. A large portion of the population remained resident, with a maximum time to recapture of nine years. The effect of logging history (unlogged vs 16-30 years post-logging regrowth) on apparent survival was minor and species specific, with no detectable effect for two species, a positive effect for one and negative for the other. There was no effect of logging history on abundance or body condition for any of these species. Apparent survival of residents was not strongly influenced by weather variation (except for the smallest species), unlike previous studies outside of refugia. Despite annual variation in abundance and body condition across the 14 years of the study, no relationship with extreme weather was evident. The location of our study area in a climate refuge potentially buffered bat population dynamics from extreme weather. These results support the value of climate refugia in mitigating climate change impacts, though the lack of an external control highlights the need for further studies on the functioning of climate refugia. Relatively stable population dynamics were not compromised by

Forest bat population dynamics over 14 years at a climate refuge: Effects of timber harvesting and weather extremes.

Directory of Open Access Journals (Sweden)

Bradley S Law

Full Text Available Long-term data are needed to explore the interaction of weather extremes with habitat alteration; in particular, can 'refugia' buffer population dynamics against climate change and are they robust to disturbances such as timber harvesting. Because forest bats are good indicators of ecosystem health, we used 14 years (1999-2012 of mark-recapture data from a suite of small tree-hollow roosting bats to estimate survival, abundance and body condition in harvested and unharvested forest and over extreme El Niño and La Niña weather events in southeastern Australia. Trapping was replicated within an experimental forest, located in a climate refuge, with different timber harvesting treatments. We trapped foraging bats and banded 3043 with a 32% retrap rate. Mark-recapture analyses allowed for dependence of survival on time, species, sex, logging treatment and for transients. A large portion of the population remained resident, with a maximum time to recapture of nine years. The effect of logging history (unlogged vs 16-30 years post-logging regrowth on apparent survival was minor and species specific, with no detectable effect for two species, a positive effect for one and negative for the other. There was no effect of logging history on abundance or body condition for any of these species. Apparent survival of residents was not strongly influenced by weather variation (except for the smallest species, unlike previous studies outside of refugia. Despite annual variation in abundance and body condition across the 14 years of the study, no relationship with extreme weather was evident. The location of our study area in a climate refuge potentially buffered bat population dynamics from extreme weather. These results support the value of climate refugia in mitigating climate change impacts, though the lack of an external control highlights the need for further studies on the functioning of climate refugia. Relatively stable population dynamics were not

Effects of timber harvest on structural diversity and species composition in hardwood forests

Directory of Open Access Journals (Sweden)

FARZAM TAVANKAR

2015-04-01

Full Text Available Tavankar F, Bonyad AE. 2015. Effects of timber harvest on structural diversity and species composition in hardwood forests. Biodiversitas 16: 1-9. Forest management leads to changes in structure and species composition of stands. In this research vertical and horizontal structure and species composition were compared in two harvested and protected stands in the Caspian forest of Iran. The results indicated the tree and seedling density, total basal area and stand volume was significantly (P < 0.01 higher in the protected stand. The Fagus orientalis L. had the most density and basal area in the both stands. Species importance value (SIV of Fagus orientalis in the protected stand (92.5 was higher than in the harvested stand (88.5. While, the SIV of shade-intolerant tree species such as Acer insigne, Acer cappadocicum and Alnus subcordata was higher in the harvested stand. The density of trees and seedling of rare tree species, such as Ulmus glabra, Tilia begonifolia, Zelkova caprinifolia and Fraxinus coriarifolia, was also higher in the protected stand. The Shannon-Wiener diversity index in the protected stand (0.84 was significantly higher (P < 0.01 than in the harvested stand (0.72. The highest diversity value in the harvested stand was observed in DBH of 10-40 cm class, while DBH of 40-70 cm had the highest diversity value in the protected stand.

Insights from a harvest trip model for non-timber forest products in the interior of Alaska

Science.gov (United States)

Kimberley Maher; Joseph Little; Patricia A. Champ

2013-01-01

The harvest of non-timber forest products (NTFP) for personal uses such as hobbies and handicrafts, cooking and canning, and recreation is an important pursuit for many residents in Alaska (Pilz and others 2006). Five categories of NTFP have been designated by the United Nations Food and Agricultural Organization: (1) foods; (2) medicinal plants; (3) floral greenery...

Wild Harvests from Scottish Woodlands Social, cultural and economic values of contemporary non-timber forest products

Science.gov (United States)

Marla Emery; Suzanne Martin; Alison Dyke; Alison Dyke

2006-01-01

More than 30 people were interviewed about the wild edibles, medicinals, and craft materials they collect and the part that collecting plays in their lives as part of the Wild Harvests from Scottish Woodlands project. Interviews were conducted in autumn 2004. Collecting non-timber forest products (NTFPs) is a source of joy and satisfaction for many of those interviewed...

Response of a tropical tree to non-timber forest products harvest and reduction in habitat size

Science.gov (United States)

Kouagou, M’Mouyohoun; Natta, Armand K.; Gado, Choukouratou

2017-01-01

Non-timber forest products (NTFPs) are widely harvested by local people for their livelihood. Harvest often takes place in human disturbed ecosystems. However, our understanding of NTFPs harvesting impacts in fragmented habitats is limited. We assessed the impacts of fruit harvest, and reduction in habitat size on the population structures of Pentadesma butyracea Sabine (Clusiaceae) across two contrasting ecological regions (dry vs. moist) in Benin. In each region, we selected three populations for each of the three fruit harvesting intensities (low, medium and high). Harvesting intensities were estimated as the proportion of fruits harvested per population. Pentadesma butyracea is found in gallery forests along rivers and streams. We used the width of gallery forests as a measure of habitat size. We found negative effects of fruit harvest on seedling and adult density but no significant effect on population size class distribution in both ecological regions. The lack of significant effect of fruit harvest on population structure may be explained by the ability of P. butyracea to compensate for the negative effect of fruit harvesting by increasing clonal reproduction. Our results suggest that using tree density and population structure to assess the ecological impacts of harvesting clonal plants should be done with caution. PMID:28850624

Response of a tropical tree to non-timber forest products harvest and reduction in habitat size.

Directory of Open Access Journals (Sweden)

Orou G Gaoue

Full Text Available Non-timber forest products (NTFPs are widely harvested by local people for their livelihood. Harvest often takes place in human disturbed ecosystems. However, our understanding of NTFPs harvesting impacts in fragmented habitats is limited. We assessed the impacts of fruit harvest, and reduction in habitat size on the population structures of Pentadesma butyracea Sabine (Clusiaceae across two contrasting ecological regions (dry vs. moist in Benin. In each region, we selected three populations for each of the three fruit harvesting intensities (low, medium and high. Harvesting intensities were estimated as the proportion of fruits harvested per population. Pentadesma butyracea is found in gallery forests along rivers and streams. We used the width of gallery forests as a measure of habitat size. We found negative effects of fruit harvest on seedling and adult density but no significant effect on population size class distribution in both ecological regions. The lack of significant effect of fruit harvest on population structure may be explained by the ability of P. butyracea to compensate for the negative effect of fruit harvesting by increasing clonal reproduction. Our results suggest that using tree density and population structure to assess the ecological impacts of harvesting clonal plants should be done with caution.

Optimal control of raw timber production processes

Science.gov (United States)

Ivan Kolenka

1978-01-01

This paper demonstrates the possibility of optimal planning and control of timber harvesting activ-ities with mathematical optimization models. The separate phases of timber harvesting are represented by coordinated models which can be used to select the optimal decision for the execution of any given phase. The models form a system whose components are connected and...

Risks, Information and Short-Run Timber Supply

Directory of Open Access Journals (Sweden)

Francesca Rinaldi

2013-12-01

Full Text Available Efforts to increase wood mobilization have highlighted the need to appraise drivers of short-run timber supply. The current study aims to shed further light on harvesting decisions of private forest owners, by investigating optimal harvesting under uncertainty, when timber revenues are invested on financial markets and uncertainty is mitigated by news releases. By distinguishing between aggregate economic risk and sector specific risks, the model studies in great detail optimal harvesting-investment decisions, with particular emphasis on the non-trivial transmission of risk on optimal harvesting, and on the way private forest owners react to news and information. The analysis of the role played by information in harvesting decisions is a novelty in forest economic theory. The presented model is highly relevant from a policy—information is a commonly used forest policy instrument—as well as a practical perspective, since the mechanism of risk transmission is at the basis of timber pricing.

Timber resource statistics for southwest Washington.

Science.gov (United States)

Patricia M. Bassett; Daniel D. Oswald

1981-01-01

This report summarizes a 1978 timber-resource inventory of six counties in southwest Washington: Clark, Cowlitz, Lewis, Pacific, Skamania, and Wahkiakum. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

Timber resource statistics for eastern Washington.

Science.gov (United States)

Patricia M. Bassett; Daniel D. Oswald

1983-01-01

This report summarizes a 1980 timber resource inventory of the 16 forested counties in Washington east of the crest of the Cascade Range. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

Procurement of timber for the Finnish forest industries

International Nuclear Information System (INIS)

Hakkila, P.

1995-01-01

The procurement of timber to the forest industries in the Nordic countries is based on the log-length or shortwood system, and employs load-carrying forwarders and chainsaw of single-grip harvesters. This technology is characterized by high productivity, safety, suitability for small-sized trees, high recovery of timber, and environmental friendliness. About one fourth of the industrial timber in the whole world is harvested using the log-length system. The challenge of ecological sustainability, multiple use of forests, adoption of thinnings as a tool of management, trend toward improved utilization of forest biomass, and shift from natural forests to plantations all increase the global interest in the log-length system. The paper presents a review of the Finnish forest sector, the technology of timber harvesting and transport, productivity of logging work, and costs of timber at the mill. The highly mechanized logging systems of the forest industries and the lighter technology of self-employed forest owners are discussed separately. Furthermore, the use of residual biomass as a source of clean and renewable energy, the Finnish logging machine industry, and forest operations research in Finland are also reviewed. (46 refs., 35 figs., 8 tabs.)

Quantifying ratios of suspended sediment sources in forested headwater streams following timber-harvesting operations

Science.gov (United States)

Rachels, A. A.; Bladon, K. D.; Bywater-Reyes, S.

2017-12-01

Historically, timber-harvesting has increased fine sediment inputs to streams due to increased hillslope and streambank erosion and mass wasting along roads. However, under modern best management practices, the relative importance and variability of these sources is poorly understood. We present preliminary results from an ongoing study investigating the primary sources of suspended sediment in Oregon Coast Range streams influenced by timber harvesting. We instrumented two catchments, Enos Creek (harvested 2016) and Scheele Creek (reference) in fall 2016. Phillips samplers (5-6 per catchment) have been deployed longitudinally down the streams to enable robust characterization of suspended sediments—the collected samples integrate the chemical signatures of upstream sediment exports. We will collect samples monthly over 2 wet seasons and return to the laboratory to analyze the sediment using source fingerprinting approaches. The fingerprinting technique compares the chemical properties of stream sediment samples with the chemical properties of potential source areas, including 1) roads, 2) stream banks, and 3) hillslopes. To design a robust model for sediment-source identification, different types of chemical data are required—we will analyze sediment samples using a combination of: a) stable isotopes and C/N ratios (i.e., δ15N, δ13C, and C/N), b) geochemistry (Fe, K, and Ca), and c) radiogenic isotopes (137Cs and 210Pb). At the harvested site, the C/N ratios of the streambanks (17.9 ± 3.8) and the hillslopes (26.4 ± 4.8) are significantly different from one another (p = .016). C/N ratios of the suspended sediment (20.5 ± 2.0) are intermediate values between potential endmembers and behave conservatively with transport. The C/N ratios of the suspended sediment appear unaffected by roads (18.9 ± 8.7) along specific sections of the stream, suggesting that roads are not a primary sediment contributor. Under this assumption, the suspended sediment is, on

Cattle and elk responses to intensive timber harvest.

Science.gov (United States)

Michael J. Wisdom; Bruce K. Johnson; Martin Vavra; Jennifer M. Boyd; Priscilla K. Coe; John G. Kie; Alan A. Ager; Norman J. Cimon

2004-01-01

Forested habitats for cattle and elk (Cervus elaphus) in the western United States have changed substantially in response to intensive timber management during the latter half of the 20th century. Consequently, the subject of how elk and other ungulates respond to timber management is a high-profile, long-standing issue that continues to be studied...

Timber Management Opportunities for Nebraska 1983-1992

Science.gov (United States)

W. Brad Smith; Tom D. Wardle

1984-01-01

Reviews opportunities for treatment of timber stands in Nebraska for the decade 1983 - 1992. Under the assumptions and management guides specified, 52 percent of Nebraska''s commercial forest land would benefit from timber harvest or some other form of treatment during the decade.

Timber resource statistics for western Washington.

Science.gov (United States)

Coffin D. MacLean; Patricia M. Bassett; Glenn. Yeary

1992-01-01

This report summarizes a 1988-90 timber resource inventory of 19 counties in western Washington: Clallam, Clark, Cowlitz, Grays Harbor, Island, Jefferson, King, Kitsap, Lewis, Mason, Pacific, Pierce, San Juan, Skagit, Skamania, Snohomish, Thurston, Wahkiakum, and Whatcom. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

Operability and location of Wisconsin's timber resource.

Science.gov (United States)

Jerold T. Hahn; Mark H. Hansen

1989-01-01

Data collected during the 1983 Wisconsin Statewide forest inventory were used to examine operability of the timber resource based on seven operability components. Operability is the ease or difficulty of managing or harvesting timber because of physical conditions in the stand or on the site.

Operability and location of Michigan's timber resource.

Science.gov (United States)

Mark H. Hansen; Jerold T. Hahn

1987-01-01

Operability is the ease or difficulty of managing or harvesting timber because of physical conditions in the stand or on the site. Data collected during the 1980 Michigan statewide forest inventory were used to examine operability of the timber resource based on seven operability components.

Aggregate Timber Supply: From the Forest to the Market

Science.gov (United States)

David N. Wear; Subhrendu K. Pattanayak

2003-01-01

Timber supply modeling is a means of formalizing the production behavior of heterogeneous landowners managing a wide variety of forest types and vintages within a region. The critical challenge of timber supply modeling is constructing theoretically valid and empirically practical aggregate descriptions of harvest behavior. Understanding timber supply is essential for...

Timber resource statistics for the Olympic Peninsula, Washington.

Science.gov (United States)

Patricia M. Bassett; Daniel D. Oswald

1961-01-01

This report summarizes a 1978-79 timber resource inventory of five counties in the Olympic Peninsula of Washington: Clallam, Grays Harbor, Jefferson, Mason, and Thurston. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

"Keeping it Living": applications and relevance of traditional plant management in British Columbia to sustainable harvesting of non-timber forest products

Science.gov (United States)

Nancy J. Turner

2001-01-01

There has been increasing concern about sustainability in harvesting and marketing of non-timber forest products in North America. This paper examines traditional approaches and practices for use of plant resources by Aboriginal peoples and discusses their applications in a contemporary context. Philosophies and attitudes of caring and respect are embodied in many...

Harvesting Water from Air: Using Anhydrous Salt with Sunlight

KAUST Repository

Li, Renyuan

2018-04-02

Atmospheric water is abundant alternative water resource, equivalent to 6 times of water in all rivers on Earth. This work screens 14 common anhydrous and hydrated salt couples in terms of their physical and chemical stability, water vapor harvesting and release capacity under relevant application scenarios. Among the salts screened, copper chloride (CuCl2), copper sulfate (CuSO4) and magnesium sulfate (MgSO4) distinguish themselves and are further made into bi-layer water collection devices, with the top layer being photothermal layer while the bottom layer being salt-loaded fibrous membrane. The water collection devices are capable of capturing water vapor out of the air with low relative humidity (down to 15 %) and releasing water under regular and even weakened sunlight (i.e. 0.7 kW/m2). The work shines light on the potential use of anhydrous salt towards producing drinking water in water scarce regions.

Recommendations for sustainable development of non-timber forest products

Science.gov (United States)

Gina H. Mohammed

2001-01-01

Non-timber forest products--or NTFPs--are considered here to be botanical products harvested or originating from forest-based species, but excluding primary timber products, industrial boards and composites, and paper products. A recent study of non-timber forest products in Ontario, Canada, identified at least 50 types of NTFPs and hundreds of specific products used...

Balancing Conservation and Economic Sustainability: The Future of the Amazon Timber Industry

Science.gov (United States)

Merry, Frank; Soares-Filho, Britaldo; Nepstad, Daniel; Amacher, Gregory; Rodrigues, Hermann

2009-09-01

Logging has been a much maligned feature of frontier development in the Amazon. Most discussions ignore the fact that logging can be part of a renewable, environmentally benign, and broadly equitable economic activity in these remote places. We estimate there to be some 4.5 ± 1.35 billion m3 of commercial timber volume in the Brazilian Amazon today, of which 1.2 billion m3 is currently profitable to harvest, with a total potential stumpage value of 15.4 billion. A successful forest sector in the Brazilian Amazon will integrate timber harvesting on private lands and on unprotected and unsettled government lands with timber concessions on public lands. If a legal, productive, timber industry can be established outside of protected areas, it will deliver environmental benefits in synergy with those provided by the region’s network of protected areas, the latter of which we estimate to have an opportunity cost from lost timber revenues of 2.3 billion over 30 years. Indeed, on all land accessible to harvesting, the timber industry could produce an average of more than 16 million m3 per year over a 30-year harvest cycle—entirely outside of current protected areas—providing 4.8 billion in returns to landowners and generating 1.8 billion in sawnwood sales tax revenue. This level of harvest could be profitably complemented with an additional 10% from logging concessions on National Forests. This advance, however, should be realized only through widespread adoption of reduced impact logging techniques.

Harvesting and consumption of fuel and timber wood in rural area of district tank, pakistan

International Nuclear Information System (INIS)

Badshah, L.; Hussain, F.; Burni, T.

2014-01-01

The study revealed that 90% of the rural people with different age group of District Tank, Pakistan depended upon firewood for catering. The total annual wood consumption for fueling by brick brewers, food sellers and domestic utilization was 18371 metric tons in this remote region. The saw machines also convert 13650 metric tons of timber wood yearly into logs and boards of various grades. The total wood consumption exceeds the quantity of wood harvested by tree fellers, farmers and wood sellers. Therefore the balance of over 13000 metric tons is sourced from neighboring forest of Tehsil Kulachi and Dera Ismail Khan. The quantity of wood removed and consumed for various purposes did not show a significant difference at (0.05) among the six locations. However student t-test showed significant difference existed in the mean annual removal and consumption of wood in the area. The study also enumerated Acacia nilotica, Tamarix aphylla, and Sueda fruticosa as the best and preferred fuel species. While Acacia nilotica, Prosopis farcta and Dalbergia sisso as the frequently used timber species in the region. The criterion of firewood and lumber consumption was very conventional like durability in blaze and opposed to termite. Consequently, it is recommended scientific vegetation conservation strategies meant at improved burning of fuel wood and maximized used of timber products as a complimentary efforts to enforced tree planting for conservation of plant resources. (author)

Temporal Decay in Timber Species Composition and Value in Amazonian Logging Concessions.

Science.gov (United States)

Richardson, Vanessa A; Peres, Carlos A

2016-01-01

Throughout human history, slow-renewal biological resource populations have been predictably overexploited, often to the point of economic extinction. We assess whether and how this has occurred with timber resources in the Brazilian Amazon. The asynchronous advance of industrial-scale logging frontiers has left regional-scale forest landscapes with varying histories of logging. Initial harvests in unlogged forests can be highly selective, targeting slow-growing, high-grade, shade-tolerant hardwood species, while later harvests tend to focus on fast-growing, light-wooded, long-lived pioneer trees. Brazil accounts for 85% of all native neotropical forest roundlog production, and the State of Pará for almost half of all timber production in Brazilian Amazonia, the largest old-growth tropical timber reserve controlled by any country. Yet the degree to which timber harvests beyond the first-cut can be financially profitable or demographically sustainable remains poorly understood. Here, we use data on legally planned logging of ~17.3 million cubic meters of timber across 314 species extracted from 824 authorized harvest areas in private and community-owned forests, 446 of which reported volumetric composition data by timber species. We document patterns of timber extraction by volume, species composition, and monetary value along aging eastern Amazonian logging frontiers, which are then explained on the basis of historical and environmental variables. Generalized linear models indicate that relatively recent logging operations farthest from heavy-traffic roads are the most selective, concentrating gross revenues on few high-value species. We find no evidence that the post-logging timber species composition and total value of forest stands recovers beyond the first-cut, suggesting that the commercially most valuable timber species become predictably rare or economically extinct in old logging frontiers. In avoiding even more destructive land-use patterns, managing

Harvested wood products and REDD+: looking beyond the forest border

Directory of Open Access Journals (Sweden)

Tunggul Butarbutar

2016-05-01

Full Text Available Abstract Background The focus of REDD+ is sensu stricto on maintaining forest carbon stocks. We extend the scope of sustainable management of forest from forests to timber utilization, and study carbon offsets resulting from the utilization of harvested timber for bio energy or harvested wood products (HWPs. The emission budget of harvesting operations depends on the loss of standing biomass by timber extracted from the forest site and logging losses on the one side, and on the other on the wood end use and the utilization of processing residues. We develop two scenarios to quantify the magnitude of CO2 emissions by (1 energetic utilization, and (2 energetic and material utilization of harvested timber and compare the substitution effects for different fossil energy sources. Results The direct energetic use of harvested timber does not compensate for the losses of forest carbon stock. Logging residuals and displacement factors reflecting different wood use constitute by far the most important factor in potential emission reductions. Substitution effects resulting from energetic use of mill residuals and from HWPs have only a subordinated contribution to the total emissions as well as the type of fossil fuel utilized to quantify substitution effects. Material substitution effects associated with harvested wood products show a high potential to increase the climate change benefits. Conclusions The observation and perception of REDD+ should not be restricted to sustainable management and reduced impact logging practices in the forest domain but should be extended to the utilization of extracted timber. Substitution effects from material and energetic utilization of harvested timber result in considerable emission reductions, which can compensate for the loss of forest carbon, and eventually contribute to the overall climate change mitigation benefits from forestry sector.

Modern Timber Harvesting Practices Have Little Short-Term Effect on Soil Carbon Stores in Industrial Forests of Western Oregon and Washington, U.S.A.

Science.gov (United States)

Holub, S. M.; Hatten, J. A.

2017-12-01

Soil carbon represents a large, but slowly changing pool of carbon in forests and understanding its response to forest management, including harvesting, is critical for determining overall stand/landscape carbon balance. Past studies have observed mixed effects of harvesting on soil carbon possibly due, in part, to imprecise sampling methods and high variability within soils. Weyerhaeuser Company has led a major effort to examine the effect of conventional timber harvesting on long-term soil carbon stores in western Oregon and Washington Douglas-fir forests using a highly-replicated longitudinal study design that enables precise estimation of variability found in these systems. In 2010, we randomly selected nine harvest units from Weyerhaeuser's 2012 harvest plan. At each non-harvested unit, a uniform, non-rocky area of about 3-6 hectares was selected for the study. Pre-harvest soil samples were collected at 300 sample points from each unit on a fixed square grid, targeting an intensity that would allow detection of >5% change in soil carbon stores. We measured soil carbon concentration and soil bulk density in depth increments to 1 m to allow for the calculation of total soil carbon per hectare. Other ecosystem pools of carbon, such as trees and downed wood, also have been measured to complete the whole-site carbon budget. All units were harvested from late 2011 through mid-year 2012. In 2015, 3-3.5 years post-harvest, we resampled the same areas in an identical manner as the pre-harvest collection to evaluate changes in soil carbon following harvest. Across all sites combined, we estimated a +2% change (-2% to +6%, 95% confidence interval) in mineral soil carbon following harvest, which is consistent with small-to-no change. Individual sites varied in direction of response; only one site showed evidence of a slight decrease in soil carbon, while two sites showed slight gains. These early results indicate that Weyerhaeuser's conventional timber harvesting methods

Spatial ecology of timber rattlesnakes on the hardwood ecosystem experiment: pre-treatment results

Science.gov (United States)

Brian J. MacGowan; Zachary J. Walker

2013-01-01

The timber rattlesnake (Crotalus horridus) is a species of conservation concern throughout much of its geographic range and may serve as a sentinel species in investigations of the effects of timber harvesting on forest reptiles. Our objective was to determine the effect of even-aged timber management regimes on timber rattlesnake home range and...

Impacts on South Carolina timber production over the last five decades.

Science.gov (United States)

Jinglong Mo; Thomas Straka; Richard Harper

2013-01-01

Timberland ownership patterns and national forest timber harvesting policy have undergone significant changes in South Carolina over the past five decades. Timber output studies for the state commonly focused on short time frames and seldom addressed timberland ownership patterns in detail. We describe fifty-year timber output for South Carolina, allowing us to address...

The 1993 timber assessment market model: structure, projections, and policy simulations.

Science.gov (United States)

Darius M. Adams; Richard W. Haynes

1996-01-01

The 1993 timber assessment market model (TAMM) is a spatial model of the solidwood and timber inventory elements of the U.S. forest products sector. The TAMM model provides annual projections of volumes and prices in the solidwood products and sawtimber stumpage markets and estimates of total timber harvest and inventory by geographic region for periods of up to 50...

The relative abundance of predicted genes associated with ammonia-oxidation, nitrate reduction, and biomass decomposition in mineral soil are altered by intensive timber harvest.

Science.gov (United States)

Mushinski, R. M.; Zhou, Y.; Gentry, T. J.; Boutton, T. W.

2017-12-01

Forest ecosystems in the southern United States are substantially altered by anthropogenic disturbances such as timber harvest and land conversion, with effects being observed in carbon and nutrient pools as well as biogeochemical processes. Furthermore, the desire to develop renewable energy sources in the form of biomass extraction from logging residues may result in alterations in soil community structure and function. While the impact of forest management on soil physicochemical properties of the region has been studied, its' long-term effect on soil bacterial community composition and metagenomic potential is relatively unknown, especially at deeper soil depths. This study investigates how intensive organic matter removal intensities associated with timber harvest influence decadal-scale alterations in bacterial community structure and functional potential in the upper 1-m of the soil profile, 18 years post-harvest in a Pinus taeda L. forest of eastern Texas. Amplicon sequencing of the 16S rRNA gene was used in conjunction with soil chemical analyses to evaluate treatment-induced differences in community composition and potential environmental drivers of associated change. Furthermore, functional potential was assessed by using amplicon data to make metagenomic predictions. Results indicate that increasing organic matter removal intensity leads to altered community composition and the relative abundance of dominant OTUs annotated to Burkholderia and Aciditerrimonas. The relative abundance of predicted genes associated with dissimilatory nitrate reduction and denitrification were highest in the most intensively harvested treatment while genes involved in nitrification were significantly lower in the most intensively harvested treatment. Furthermore, genes associated with glycosyltransferases were significantly reduced with increasing harvest intensity while polysaccharide lyases increased. These results imply that intensive organic matter removal may create

Non-timber forest products and forest stewardship plans

Science.gov (United States)

Becky Barlow; Tanner Filyaw; Sarah W. Workman

2015-01-01

To many woodland owners “harvesting” typically means the removal of timber from forests. In recent years many landowners have become aware of the role non-timber forest products (NTFPs) can play in supplemental management strategies to produce income while preserving other forest qualities. NTFPs are a diverse group of craft, culinary, and medicinal products that have...

North Dakota timber industry: an assessment of timber product output and use, 2009

Science.gov (United States)

David E. Haugen; Robert A. Harsel

2013-01-01

Presents recent North Dakota forest industry trends; production and receipts of industrial roundwood; and production of saw logs and other products in 2009. Logging residue generated from timber harvest operations is reported, as well as wood and bark residue generated at primary wood-using mills and disposition of mill residues.

South Dakota timber industry: an assessment of timber product output and use, 2009

Science.gov (United States)

Ronald J. Piva; Gregory J. Josten

2013-01-01

Presents recent South Dakota forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, pulpwood, and other products in 2009. Logging residue generated from timber harvest operations is reported, as well as wood and bark residue generated at primary wood-using mills and disposition of mill residues.

Timber resource statistics for non-Federal forest land in west-central Oregon.

Science.gov (United States)

Donald R. Gedney; Patricia M. Bassett; Mary A. Mei

1987-01-01

This report summarizes a 1985-86 timber resource inventory of the non-Federal forest land in the four counties (Benton, Lane, Lincoln, and Linn) in west-central Oregon. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

Timber resource statistics for non-federal forest land in northwest Oregon.

Science.gov (United States)

Donald R. Gedney; Patricia M. Bassett; Mary A. Mei

1986-01-01

This report summarizes a 1986 timber resource inventory of the non-Federal forest land in the 10 counties (Clackamas, Clatsop, Columbia, Hood River, Marion, Multnomah , Polk, Tillamook, Washington, and Yamhill) in northwest Oregon. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

Harvesting systems for the northern forest hardwoods

Science.gov (United States)

Chris B. LeDoux

2011-01-01

This monograph is a summary of research results and environmental compliance measures for timber harvesting operations. Data are presented from the Northern Research Station's forest inventory and analysis of 20 states in the northern forest hardwoods. Harvesting systems available in the region today are summarized. Equations for estimating harvesting costs are...

The Economics of Timber Supply: An Analytical Synthesis of Modeling Approaches

Science.gov (United States)

David N. Wear; Peter J. Parks

1994-01-01

The joint supply of timber and other services from forest environments plays a central role in most forest land debates. This paper defines a general conceptual model of timber supply that provides the context for discussing both individual harvest choice and aggregate supply models. While the structure and breadth of these models has developed considerably over the...

Assessing the spatial implications of interactions among strategic forest management options using a Windows-based harvest simulator.

Science.gov (United States)

Eric J. Gustafson; Luke V. Rasmussen

2002-01-01

Forest management planners must develop strategies to produce timber in ways that do not compromise ecological integrity or sustainability. These strategies often involve modifications to the spatial and temporal scheduling of harvest activities, and these strategies may interact in unexpected ways. We used a timber harvest simulator (HARVEST 6.0) to determine the...

Using TPO data to estimate timber demand in support of planning on the Tongass National Forest

Science.gov (United States)

Jean M. Daniels; Michael D. Paruszkiewicz; Susan J. Alexander

2015-01-01

Projections of Alaska timber products output, the derived demand for logs, lumber, residues, and niche products, and timber harvest by owner are developed by using a trend-based analysis. This is the fifth such analysis performed since 1990 to assist planners in meeting statutory requirements for estimating planning cycle demand for timber from the Tongass National...

Who, what, and why: the products, their use, and issues about management of non-timber forest products in the United States

Science.gov (United States)

Susan J. Alexander

2001-01-01

Non-timber forest products in the United States include floral greens, Christmas ornamentals, wild edibles, medicinals, crafts, and transplants. Non-timber forest products are important to many people for many reasons. People harvest products from forests for personal use, cultural practices, and sale. The tremendous variety of species harvested for the many markets...

Concurring Regulation in European Forest Law; Forest Certification and the New EU Timber Regulation

NARCIS (Netherlands)

Kistenkas, F.H.

2013-01-01

Newly made EU Timber Regulation (EUTR) may prima facie look like competing regulation and an overlap of the existing forest certification schemes of FSC and PEFC as also EUTR combats illegally harvested timber. The novel EUTR, however, is a public law scheme wheras FSC and PEFC are private law

Non-timber forest products in Hawaii

Science.gov (United States)

Katie Kamelamela; James B. Friday; Tamara Ticktin; Ashley. Lehman

2015-01-01

Hawaiian forests provide a wide array of non-timber forest products for both traditional and modern uses. Flowers, vines, and ferns are collected for creating garlands or lei for hula dances and parades. Lei made from materials gathered in the forest are made for personal use and sold, especially during graduation times. Bamboo is harvested for structures and for...

Finite element analysis of composite concrete-timber beams

Directory of Open Access Journals (Sweden)

N. C. S. FORTI

Full Text Available AbstractIn the search for sustainable construction, timber construction is gaining in popularity around the world. Sustainably harvested wood stores carbon dioxide, while reforestation absorbs yet more CO2. One technique involves the combination of a concrete slab and a timber beam, where the two materials are assembled by the use of flexible connectors. Composite structures provide reduced costs, environmental benefits, a better acoustic performance, when compared to timber structures, and maintain structural safety. Composite structures combine materials with different mechanical properties. Their mechanical performance depends on the efficiency of the connection, which is designed to transmit shear longitudinal forces between the two materials and to prevent vertical detachment. This study contributes with the implementation of a finite element formulation for stress and displacement determination of composite concrete-timber beams. The deduced stiffness matrix and load vector are presented along to numerical examples. Numerical examples are compared to the analytical equations available in Eurocode 5 and to experimental data found in the literature.

Regional Changes in the Timber Resources of and Lumber Production in Pennsylvania

Science.gov (United States)

William G. Luppold; Matthew S. Bumgardner; Matthew S. Bumgardner

2005-01-01

In this study we examine regional differences in the hardwood timber resources of Pennsylvania and explain how the combined changes in this resource and in lumber prices have influenced regional lumber production. Isolation of these relationships is important because shifts in lumber production affect harvesting levels and harvesting activity influences long-term...

Turbidity Responses from Timber Harvesting, Wildfire, and Post-Fire Logging in the Battle Creek Watershed, Northern California.

Science.gov (United States)

Lewis, Jack; Rhodes, Jonathan J; Bradley, Curtis

2018-04-11

The Battle Creek watershed in northern California was historically important for its Chinook salmon populations, now at remnant levels due to land and water uses. Privately owned portions of the watershed are managed primarily for timber production, which has intensified since 1998, when clearcutting became widespread. Turbidity has been monitored by citizen volunteers at 13 locations in the watershed. Approximately 2000 grab samples were collected in the 5-year analysis period as harvesting progressed, a severe wildfire burned 11,200 ha, and most of the burned area was salvage logged. The data reveal strong associations of turbidity with the proportion of area harvested in watersheds draining to the measurement sites. Turbidity increased significantly over the measurement period in 10 watersheds and decreased at one. Some of these increases may be due to the influence of wildfire, logging roads and haul roads. However, turbidity continued trending upwards in six burned watersheds that were logged after the fire, while decreasing or remaining the same in two that escaped the fire and post-fire logging. Unusually high turbidity measurements (more than seven times the average value for a given flow condition) were very rare (0.0% of measurements) before the fire but began to appear in the first year after the fire (5.0% of measurements) and were most frequent (11.6% of measurements) in the first 9 months after salvage logging. Results suggest that harvesting contributes to road erosion and that current management practices do not fully protect water quality.

Investigation of timber harvesting mechanization progress in Turkey ...

African Journals Online (AJOL)

Log in or Register to get access to full text downloads. ... of substantial number of harvesters, the amount of modern harvesting processor in Turkey is not sufficient. Different type and marked machines have not been taken into consideration to ...

Harvesting systems and costs for southern pine in the 1980s

Science.gov (United States)

Frederick W. Cubbage; James E. Granskog

1981-01-01

Timber harvesting systems and their costs are a major concern for the forest products industries. In this paper, harvest costs per cord are estimated, using computer simulation, for current southern pine harvesting systems. The estimations represent a range of mechanization levels. The sensitivity of systems to factors affecting harvest costs - machine costs, fuel...

Aquatic ecosystem response to timber harvesting for the purpose of restoring aspen.

Directory of Open Access Journals (Sweden)

Bobette E Jones

Full Text Available The removal of conifers through commercial timber harvesting has been successful in restoring aspen, however many aspen stands are located near streams, and there are concerns about potential aquatic ecosystem impairment. We examined the effects of management-scale conifer removal from aspen stands located adjacent to streams on water quality, solar radiation, canopy cover, temperature, aquatic macroinvertebrates, and soil moisture. This 8-year study (2003-2010 involved two projects located in Lassen National Forest. The Pine-Bogard Project consisted of three treatments adjacent to Pine and Bogard Creeks: (i Phase 1 in January 2004, (ii Phase 2 in August 2005, and (iii Phase 3 in January 2008. The Bailey Project consisted of one treatment adjacent to Bailey Creek in September 2006. Treatments involved whole tree removal using track-laying harvesters and rubber tire skidders. More than 80% of all samples analyzed for NO₃-N, NH₄-N, and PO₄-P at Pine, Bogard, and Bailey Creeks were below the detection limit, with the exception of naturally elevated PO₄-P in Bogard Creek. All nutrient concentrations (NO₃-N, NH₄-N, PO₄-P, K, and SO₄-S showed little variation within streams and across years. Turbidity and TSS exhibited annual variation, but there was no significant increase in the difference between upstream and downstream turbidity and TSS levels. There was a significant decrease in stream canopy cover and increase in the potential fraction of solar radiation reaching the streams in response to the Pine-Bogard Phase 3 and Bailey treatments; however, there was no corresponding increase in stream temperatures. Macroinvertebrate metrics indicated healthy aquatic ecosystem conditions throughout the course of the study. Lastly, the removal of vegetation significantly increased soil moisture in treated stands relative to untreated stands. These results indicate that, with careful planning and implementation of site-specific best management

Modeling the Influence of Dynamic Zoning of Forest Harvesting on Ecological Succession in a Northern Hardwoods Landscape

Science.gov (United States)

Patrick A. Zollner; Eric J. Gustafson; Hong S. He; Volker C. Radeloff; David J. Mladenoff

2005-01-01

Dynamic zoning (systematic alteration in the spatial and temporal allocation of even-aged forest management practices) has been proposed as a means to change the spatial pattern of timber harvest across a landscape to maximize forest interior habitat while holding timber harvest levels constant. Simulation studies have established that dynamic zoning strategies...

Policy Effectiveness of Loan for Delaying Timber Harvesting for Smallholder Private Forest in Indonesia

Directory of Open Access Journals (Sweden)

Bramasto Nugroho

2017-08-01

Full Text Available This study aimed to analyze policy effectiveness of loan for delaying timber harvesting for smallholder private forest business (Pinjaman Tunda Tebang Hutan Rakyat; hereinafter will be referred as PTT-HR. The analysis will be used to provide recommendations for improving PTT-HR scheme included scaling out and scaling up of the scheme for improving economic benefits and supporting smallholder private forest business as well as for strengthening farmer's welfare. Field survey was conducted in October–November 2013 in two districts in Central of Java, Indonesia namely Blora and Wonosobo District as recipient of PTT-HR from Public Service Agency for Forest Development Financing Center (BLU Center of P2H Ministry of Forestry, Republic of Indonesia. The results showed that PTT-HR policy has implemented effectively based on evaluation parameter derived from the objectives of policy namely the age of the stands for loan collateral, the capabilities for improving farmer's welfare, utilization of loan, perception of the farmers regarding to the ease of the process and purpose of loan utilization, and the capability of loan repayment. However, this research has not been answered the aspect of PTT-HR policy implementation efficiency

Implementing CITES regulations for timber.

Science.gov (United States)

Blundell, Arthur G

2007-03-01

Foresters are currently confronted with a new challenge. For the first time a commonly traded timber species has been listed on the Convention on International Trade in Endangered Species of Wild Fauna and Flora (CITES). At the 12th Conference of the Parties in November 2002, countries voted 68 to 30 to place the premier timber species of Latin America, big-leaf mahogany (Swietenia macrophylla King [Meliaceae]), on CITES Appendix II. Under Appendix II regulations, trade in mahogany requires that exporting countries verify that each shipment was legally obtained and that its harvest was non-detrimental to the survival of the species. Unfortunately, implementation has been weak, in part because countries have yet to develop a common, pragmatic, cost-effective system to make the legal and non-detriment findings. This paper recommends what such a system might include.

Emissions from prescribed burning of timber slash piles in Oregon.

Science.gov (United States)

Emissions from burning piles of post-harvest timber slash (Douglas fir) in Grande Ronde, Oregon were sampled using an instrument platform lofted into the plume using a tether-controlled aerostat or balloon. Emissions of carbon monoxide, carbon dioxide, methane, particulate matte...

A Spatially Explicit Method to Assess the Economic Suitability of a Forest Road Network for Timber Harvest in Steep Terrain

Directory of Open Access Journals (Sweden)

Leo Gallus Bont

2018-03-01

Full Text Available Despite relatively high road density in the forests of Switzerland, a large percentage of that road network does not fulfill best practice requirements. Before upgrading or rebuilding the road network, harvesting planners must first determine which areas have insufficient access. Traditional assessment methods tend to only report specific values such as road density. However, those values do not identify the exact parcels or areas that are inaccessible. Here, we present a model that assesses the economic suitability of each timbered parcel for wood-harvesting operations, including tree-felling and processing, and off- and on-road transport (hauling, based on the existing road network. The entire wood supply chain from forest (standing trees to a virtual pile at the border of the planning unit was captured. This method was particularly designed for steep terrain and was tested in the Canton of Grisons in Switzerland. Compared with classical approaches, such as the road density concept, which only deliver average values, this new method enables planners to assess the development of a road network in a spatially explicit manner and to easily identify the reason and the location of shortcomings in the road network. Moreover, while other related spatially explicit approaches focus only on harvesting operations, the assessment method proposed here also includes limitations (road standards of the road network.

Sea salt

OpenAIRE

Galvis-Sánchez, Andrea C.; Lopes, João Almeida; Delgadillo, Ivone; Rangel, António O. S. S.

2013-01-01

The geographical indication (GI) status links a product with the territory and with the biodiversity involved. Besides, the specific knowledge and cultural practices of a human group that permit transforming a resource into a useful good is protected under a GI designation. Traditional sea salt is a hand-harvested product originating exclusively from salt marshes from specific geographical regions. Once salt is harvested, no washing, artificial drying or addition of anti-caking agents are all...

FOREST HARVEST SCHEDULING PLAN INTEGRATED TO THE ROAD NETWORK

Directory of Open Access Journals (Sweden)

Pedro Henrique Belavenutti Martins da Silva

2016-03-01

Full Text Available In industrial forest plantations, the spatial distribution of management units for harvest scheduling influences the timber production cost and the non-renewable resources consumption, due to issues related to transport logistic. In this context, this research aimed to formulate Integer Linear Programming (ILP by means of the application of Floyd-Warshall network optimization algorithm to generate timber production routes, minimizing the production costs resulting from harvest activities and forest road maintenance. Then, scenarios were simulated considering different minimal harvest ages for Pinus spp. and Eucalyptus spp. stands. The planning horizon was five years with annual periodicity. The study area was 23,330 hectares of forests, located in Paraná state (southern Brazil. We compared the simulated scenarios according to the following parameter indicators: harvest income, building road network and the production unit cost. The decreasing of the minimal harvest age reduces the mean production of management units scheduled to be harvested, in other hand, it requires fewer roads to be built, and consequently increases the production unit cost. The solutions obtained by using ILP models presented an optimality gap lower than 0.1%.

Long term effects of wet site timber harvesting and site preparation on soil properties and loblolly pine (Pinus taeda L.) productivity in the lower Atlantic Coastal Plain

OpenAIRE

Neaves III, Charles Mitchell

2017-01-01

Short term studies have suggested that ground based timber harvesting on wet sites can alter soil properties and inhibit early survival and growth of seedlings. Persistence of such negative effects may translate to losses in forest productivity over a rotation. During the fall and winter of 1989, numerous salvage logging operations were conducted during high soil moisture conditions on wet pine flats in the lower coastal plain of South Carolina following Hurricane Hugo. A long-term experim...

The value of volume and growth measurements in timber sales management of the National Forests

Science.gov (United States)

Lietzke, K. R.

1977-01-01

This paper summarizes work performed in the estimation of gross social value of timber volume and growth rate information used in making regional harvest decisions in the National Forest System. A model was developed to permit parametric analysis. The problem is formulated as one of finding optimal inventory holding patterns. Public timber management differs from other inventory holding problems in that the inventory, itself, generates value over time in providing recreational, aesthetic and environmental goods. 'Nontimber' demand estimates are inferred from past Forest Service harvest and sales levels. The solution requires a description of the harvest rates which maintain the optimum inventory level. Gross benefits of the Landsat systems are estimated by comparison with Forest Service information gathering models. Gross annual benefits are estimated to be $5.9 million for the MSS system and $7.2 million for the TM system.

Timber Regulation and Value Chain in Community-Based Timber Enterprise and Smallholder Forestry in the Philippines

Directory of Open Access Journals (Sweden)

Juan M. Pulhin

2016-07-01

Full Text Available Forest tenure reform has no doubt attained significant gains in promoting social justice and equity in the forest sector, through legal recognition of the communities’ property rights over forest lands in many developing countries. This includes the right to harvest and market trees that the communities planted. Along these lines, the Philippines’ community-based forest management (CBFM and smallholder forestry have the potential to meet the country’s wood demand and contribute to its poverty alleviation goal. Realities on the ground, however, make this lofty aspiration seems too far-fetched. Formal and informal barriers along the timber value chain restrict the growth and obstruct opportunities for community-based timber enterprises (CBTEs and smallholder forestry. Using the case of CBFM and smallholder forestry in the Visayas and Mindanao Islands in the Philippines, respectively, this paper examines the hurdles posed by regulations and informal practices, such as restrictive policies and increased transaction costs, through a segment analysis of the timber value chain. It argues that failure to address these barriers would lead to the decline of CBTEs and smallholder enterprises, thus undermining the merits of the forest tenure reform.

New methods for estimating non-timber forest product output: an Appalachian case study

Science.gov (United States)

Steve Kruger; James. Chamberlain

2015-01-01

Assessing the size and structure of non-timber forest product (NTFP) markets is difficult due to a lack of knowledge about NTFP supply chains. Harvesting ginseng and other wild medicinal plants has long provided a source of income and cultural identity in Appalachian communities in the eastern United States. With the exception of ginseng, the extent of the harvest of...

Applying of whole-tree harvesting method; Kokopuujuontomenetelmaen soveltaminen aines- ja energiapuun hankintaan

Energy Technology Data Exchange (ETDEWEB)

Vesisenaho, T [VTT Energy, Jyvaeskylae (Finland); Liukkonen, S [VTT Manufacturing Technology, Espoo (Finland)

1997-12-01

The objective of this project is to apply whole-tree harvesting method to Finnish timber harvesting conditions in order to lower the harvesting costs of energy wood and timber in spruce-dominant final cuttings. In Finnish conditions timber harvesting is normally based on the log-length method. Because of small landings and the high level of thinning cuttings, whole-tree skidding methods cannot be utilised extensively. The share of stands which could be harvested with whole-tree skidding method showed up to be about 10 % of the total harvesting amount of 50 mill. m{sup 3}. The corresponding harvesting potential of energy wood is 0,25 Mtoe. The aim of the structural measurements made in this project was to get information about the effect of different hauling methods into the structural response of the tractor, and thus reveal the possible special requirements that the new whole-tree skidding places forest tractor design. Altogether 7 strain gauge based sensors were mounted into the rear frame structures and drive shafts of the forest tractor. Five strain gauges measured local strains in some critical details and two sensors measured the torque moments of the front and rear bogie drive shafts. Also the revolution speed of the rear drive shaft was recorded. Signal time histories, maximum peaks, Time at Level distributions and Rainflow distributions were gathered in different hauling modes. From these, maximum values, average stress levels and fatigue life estimates were calculated for each mode, and a comparison of the different methods from the structural point of view was performed

Evaluating timber harvesting impacts on wildlife habitat suitability using FOREX

Science.gov (United States)

Chris B. LeDoux

1997-01-01

Precommercial, commercial, and final harvesting operations can impact wildlife habitat suitability by altering the vegetation composition on a given site. Harvesting operations remove trees and many times provide the necessary perturbation to trigger successional conditions different from those that existed prior to the harvest. Although these new successional changes...

Historical harvests reduce neighboring old-growth basal area across a forest landscape.

Science.gov (United States)

Bell, David M; Spies, Thomas A; Pabst, Robert

2017-07-01

While advances in remote sensing have made stand, landscape, and regional assessments of the direct impacts of disturbance on forests quite common, the edge influence of timber harvesting on the structure of neighboring unharvested forests has not been examined extensively. In this study, we examine the impact of historical timber harvests on basal area patterns of neighboring old-growth forests to assess the magnitude and scale of harvest edge influence in a forest landscape of western Oregon, USA. We used lidar data and forest plot measurements to construct 30-m resolution live tree basal area maps in lower and middle elevation mature and old-growth forests. We assessed how edge influence on total, upper canopy, and lower canopy basal area varied across this forest landscape as a function of harvest characteristics (i.e., harvest size and age) and topographic conditions in the unharvested area. Upper canopy, lower canopy, and total basal area increased with distance from harvest edge and elevation. Forests within 75 m of harvest edges (20% of unharvested forests) had 4% to 6% less live tree basal area compared with forest interiors. An interaction between distance from harvest edge and elevation indicated that elevation altered edge influence in this landscape. We observed a positive edge influence at low elevations (800 m). Surprisingly, we found no or weak effects of harvest age (13-60 yr) and harvest area (0.2-110 ha) on surrounding unharvested forest basal area, implying that edge influence was relatively insensitive to the scale of disturbance and multi-decadal recovery processes. Our study indicates that the edge influence of past clearcutting on the structure of neighboring uncut old-growth forests is widespread and persistent. These indirect and diffuse legacies of historical timber harvests complicate forest management decision-making in old-growth forest landscapes by broadening the traditional view of stand boundaries. Furthermore, the consequences

Non-timber forest products of the North-West District of Guyana

NARCIS (Netherlands)

Andel, T.R. van

2000-01-01

This thesis describes the use of non-timber forest products (NTFPs) by indigenous peoples of northwest Guyana. Part I contains a general analysis of NTFP harvesting in northwest Guyana Part II is an illustrated field guide of the useful plants encountered. Chapter 1: introduction Chapter

Threshold responses of songbirds to long-term timber management on an active industrial forest

Science.gov (United States)

Becker, Douglas A.; Wood, Petra Bohall; Keyser, Patrick D.; Wigley, T. Bently; Dellinger, Rachel; Weakland, Cathy A.

2011-01-01

Forest managers often seek to balance economic benefits from timber harvesting with maintenance of habitat for wildlife, ecosystem function, and human uses. Most research on the relationship between avian abundance and active timber management has been short-term, lasting one to two years, creating the need to investigate long-term avian responses and to identify harvest thresholds when a small change in habitat results in a disproportionate response in relative abundance and nest success. Our objectives were to identify trends in relative abundance and nest success and to identify landscape-scale disturbance thresholds for avian species and habitat guilds in response to a variety of harvest treatments (clear-cuts, heavy and light partial harvests) over 14 years. We conducted point counts and monitored nests at an industrial forest in the central Appalachians of West Virginia during 1996–1998, 2001–2003, and 2007–2009. Early successional species increased in relative abundance across all three time periods, whereas interior-edge and forest-interior guilds peaked in relative abundance mid-study after which the forest-interior guild declined. Of 41 species with >10 detections, four (10%) declined significantly, 13 (32%) increased significantly (only three species among all periods), and 9 (22%) peaked in abundance mid-study (over the entire study period, four species had no significant change in abundance, four declined, and one increased). Based on piecewise linear models, forest-interior and interior-edge guilds’ relative abundance harvest thresholds were 28% total harvests (all harvests combined), 10% clear-cut harvests, and 18% light partial harvests, after which abundances declined. Harvest thresholds for the early successional guild were 42% total harvests, 11% clear-cut harvest, and 10% light partial harvests, and relative abundances increased after surpassing thresholds albeit at a reduced rate of increase after the clear-cut threshold. Threshold

Connecting non-timber forest products stakeholders to information and knowledge: A case study of an Internet web site

Science.gov (United States)

James Chamberlain; Matt Winn; A.L. Hammett

2009-01-01

Many products are harvested from forests that are not timber-based but are based on plant materials. These non-timber forest products (NTFPs) have not been fully incorporated into economic development programs, yet they provide significant monetary benefits for rural entrepreneurs. Interest in NTFPs as alternative forest enterprises and sources of additional income has...

Mapping resource use over a Russian landscape: an integrated look at harvesting of a non-timber forest product in central Kamchatka

International Nuclear Information System (INIS)

Hitztaler, Stephanie K; Bergen, Kathleen M

2013-01-01

Small-scale resource use became an important adaptive mechanism in remote logging communities in Russia at the onset of the post-Soviet period in 1991. We focused on harvesting of a non-timber forest product, lingonberry (Vaccinium vitis-idaea), in the forests of the Kamchatka Peninsula (Russian Far East). We employed an integrated geographical approach to make quantifiable connections between harvesting and the landscape, and to interpret these relationships in their broader contexts. Landsat TM images were used for a new classification; the resulting land-cover map was the basis for linking non-spatial data on harvesters’ gathering behaviors to spatial data within delineated lingonberry gathering sites. Several significant relationships emerged: (1) mature forests negatively affected harvesters’ initial choice to gather in a site, while young forests had a positive effect; (2) land-cover type was critical in determining how and why gathering occurred: post-disturbance young and maturing forests were significantly associated with higher gathering intensity and with the choice to market harvests; and (3) distance from gathering sites to villages and main roads also mattered: longer distances were significantly correlated to more time spent gathering and to increased marketing of harvests. We further considered our findings in light of the larger ecological and social dynamics at play in central Kamchatka. This unique study is an important starting point for conservation- and sustainable development-based work, and for additional research into the drivers of human–landscape interactions in the Russian Far East. (letter)

Variability after 15 Years of Vegetation Recovery in Natural Secondary Forest with Timber Harvesting at Different Intensities in Southeastern China: Community Diversity and Stability

Directory of Open Access Journals (Sweden)

Zhilong Wu

2018-01-01

Full Text Available The mixed Cunninghamia lanceolata (Lamb. Hook., Pinus massoniana Lamb., and hardwood forest in southeastern China is a major assemblage in natural secondary forests, and of national and international importance in terms of both timber and ecosystem services. However, over-harvesting has threatened its long-term sustainability, and there is a knowledge gap relating to the effect of harvesting on the ecosystem. After conifer species were selected for harvesting, the mixed Chinese fir, pine, and hardwood forest was changed into mixed evergreen broadleaf forest. In this context, we observed the restoration dynamics of plant communities over a period of 15 years (1996 to 2011 with different levels of harvesting intensity, including selective harvesting at low (13.0% removal of growing stock volume, medium (29.1%, high (45.8%, and extra-high (67.1% intensities, as well as clear-cut harvesting (100.0%, with non-harvesting as the control, based on permanent sample plots established in a randomized block design in these forests in southeastern China. The impact on the richness, diversity, and evenness of plant species derived from descriptive statistical analyses was shown to initially increase, and then decrease, with an increase in harvesting intensity. The most critical impacts were on the richness, diversity, and evenness of shrub and herb species. Richness, diversity, and evenness of plant species recovered and increased under selective harvesting at low and medium intensities, while these parameters had not recovered and significantly decreased under selective harvesting at high and extra-high intensities, as well as with clear-cut harvesting. The impact on the plant community stability was derived from the stability test method of the improved Godron M. The plant community stability was closest to the point of stability (20/80 under selective harvesting at medium intensity, followed by selective harvesting at low intensity. The plant community

Sensitivity of TRIM projections to management, harvest, yield, and stocking adjustment assumptions.

Science.gov (United States)

Susan J. Alexander

1991-01-01

The Timber Resource Inventory Model (TRIM) was used to make several projections of forest industry timber supply for the Douglas-fir region. The sensitivity of these projections to assumptions about management and yields is discussed. A base run is compared to runs in which yields were altered, stocking adjustment was eliminated, harvest assumptions were changed, and...

Timber productivity research gaps for extensive forest management

Science.gov (United States)

L.C. Irland

2011-01-01

On extensive areas of small scale forests, significant opportunities for improving the value of future timber harvests while also improving other resource values are now being missed. A new focus on practical extensive management research is needed, especially as implementation of intensive practices has been declining in many areas, and new ‘‘close to nature’’...

Tree mortality from fires, bark beetles, and timber harvest during a hot and dry decade in the western United States (2003-2012)

Science.gov (United States)

Berner, Logan T.; Law, Beverly E.; Meddens, Arjan J. H.; Hicke, Jeffrey A.

2017-06-01

High temperatures and severe drought contributed to extensive tree mortality from fires and bark beetles during the 2000s in parts of the western continental United States. Several states in this region have greenhouse gas (GHG) emission targets and would benefit from information on the amount of carbon stored in tree biomass killed by disturbance. We quantified mean annual tree mortality from fires, bark beetles, and timber harvest from 2003-2012 for each state in this region. We estimated tree mortality from fires and beetles using tree aboveground carbon (AGC) stock and disturbance data sets derived largely from remote sensing. We quantified tree mortality from harvest using data from US Forest Service reports. In both cases, we used Monte Carlo analyses to track uncertainty associated with parameter error and temporal variability. Regional tree mortality from harvest, beetles, and fires (MORTH+B+F) together averaged 45.8 ± 16.0 Tg AGC yr-1 (±95% confidence interval), indicating a mortality rate of 1.10 ± 0.38% yr-1. Harvest accounted for the largest percentage of MORTH+B+F (˜50%), followed by beetles (˜32%), and fires (˜18%). Tree mortality from harvest was concentrated in Washington and Oregon, where harvest accounted for ˜80% of MORTH+B+F in each state. Tree mortality from beetles occurred widely at low levels across the region, yet beetles had pronounced impacts in Colorado and Montana, where they accounted for ˜80% of MORTH+B+F. Tree mortality from fires was highest in California, though fires accounted for the largest percentage of MORTH+B+F in Arizona and New Mexico (˜50%). Drought and human activities shaped regional variation in tree mortality, highlighting opportunities and challenges to managing GHG emissions from forests. Rising temperatures and greater risk of drought will likely increase tree mortality from fires and bark beetles during coming decades in this region. Thus, sustained monitoring and mapping of tree mortality is necessary to

Effects of timber harvests on invertebrate biomass and avian nest success

Science.gov (United States)

Jeffrey P. Duguay; Petra Bohall Wood; Gary W. Miller

2000-01-01

Concerns over declining songbird populations have led to investigations of effects of various timber management practices on breeding songbirds. We assessed the influence of 2 types of practices, two-age and clearcutting, on invertebrate biomass and avian daily nest survival in the Monongahela National Forest of West Virginia during summers of 1995 and 1996. We also...

A detrimental soil disturbance prediction model for ground-based timber harvesting

Science.gov (United States)

Derrick A. Reeves; Matthew C. Reeves; Ann M. Abbott; Deborah S. Page-Dumroese; Mark D. Coleman

2012-01-01

Soil properties and forest productivity can be affected during ground-based harvest operations and site preparation. The degree of impact varies widely depending on topographic features and soil properties. Forest managers who understand site-specific limits to ground-based harvesting can alter harvest method or season to limit soil disturbance. To determine the...

Harvesting pulpwood and firewood using a tractor-mounted single-grip harvester

International Nuclear Information System (INIS)

Ihonen, M.

1998-01-01

The TTS-Institute's Department of Forestry conducted a work study on the AM 240 felling-delimbing-cross-cutting -device. The timber was prepared into pulp- and fuelwood. The tops of the pulpwood stems and stems smaller than pulpwood were made into fuelwood. The base machine used was an agricultural tractor. The study is part of a research project titled Forest Owners' Energy-Wood Harvesting Technology. The combined productivity of preparing pulpwood and fuelwood varied between 2.8-4.1 m 3 per effective hour. Thus, the productivity achieved was of the same order as that reported in an earlier TTS-Institute study on the devices AM 200 model. The outturns on the sample strips included a fair amount of crooked hardwood timber, which iced to reduced productivity. During the work study the felling device functioned reliably. (author) 3 refs

Spatial simulation of forest succession and timber harvesting using LANDIS

Science.gov (United States)

Eric J. Gustafson; Stephen R. Shifley; David J. Mladenoff; Kevin K. Nimerfro; Hong S. He

2000-01-01

The LANDIS model simulates ecological dynamics, including forest succession, disturbance, seed dispersal and establishment, fire and wind disturbance, and their interactions. We describe the addition to LANDIS of capabilities to simulate forest vegetation management, including harvest. Stands (groups of cells) are prioritized for harvest using one of four ranking...

Trade-offs between carbon stocks and timber recovery in tropical forests are mediated by logging intensity.

Science.gov (United States)

Roopsind, Anand; Caughlin, T Trevor; van der Hout, Peter; Arets, Eric; Putz, Francis E

2018-03-30

Forest degradation accounts for ~ 70% of total carbon losses from tropical forests. Substantial emissions are from selective logging, a land-use activity that decreases forest carbon density. To maintain carbon values in selectively logged forests, climate change mitigation policies and government agencies promote the adoption of reduced-impact logging (RIL) practices. However, whether RIL will maintain both carbon and timber values in managed tropical forests over time remains uncertain. In this study, we quantify the recovery of timber stocks and aboveground carbon at an experimental site where forests were subjected to different intensities of RIL (4 trees ha -1 , 8 trees ha -1 , and 16 trees ha -1 ). Our census data spans 20 years post-logging and 17 years after the liberation of future crop trees from competition in a tropical forest on the Guiana Shield, a globally important forest carbon reservoir. We model recovery of timber and carbon with a breakpoint regression that allowed us to capture elevated tree mortality immediately after logging. Recovery rates of timber and carbon were governed by the presence of residual trees (i.e., trees that persisted through the first harvest). The liberation treatment stimulated faster recovery of timber albeit at a carbon cost. Model results suggest a threshold logging intensity beyond which forests managed for timber and carbon derive few benefits from RIL, with recruitment and residual growth not sufficient to offset losses. Inclusion of the breakpoint at which carbon and timber gains outpaced post-logging mortality led to high predictive accuracy, including out-of-sample R 2 values >90%, and enabled inference on demographic changes post-logging. Our modeling framework is broadly applicable to studies that aim to quantify impacts of logging on forest recovery. Overall, we demonstrate that initial mortality drives variation in recovery rates, that the second harvest depends on old growth wood, and that timber

Global modelling to predict timber production and prices: the GFPM approach

Science.gov (United States)

Joseph Buongiorno

2014-01-01

Timber production and prices are determined by the global demand for forest products, and the capability of producers from many countries to grow and harvest trees, transform them into products and export. The Global Forest Products Model (GFPM) simulates how this global demand and supply of multiple products among many countries determines prices and attendant...

Sustainability of Mangrove Harvesting: How do Harvesters' Perceptions Differ from Ecological Analysis?

Directory of Open Access Journals (Sweden)

Laura López-Hoffman

2006-12-01

Full Text Available To harvest biological resources sustainably, it is first necessary to understand what "sustainability" means in an ecological context, and what it means to the people who use the resources. As a case study, we examined the extractive logging of the mangrove Rhizophora mangle in the Río Limón area of Lake Maracaibo, in western Venezuela. The ecological definition of sustainable harvesting is harvesting that allows population numbers to be maintained or to increase over time. In interviews, the harvesters defined sustainable harvesting as levels permitting the maintenance of the mangrove population over two human generations, about 50 yr. In Río Limón, harvesters extract a combination of small adult and juvenile trees. Harvesting rates ranged from 7-35% of small adult trees. These harvesting levels would be sustainable according to the harvester's definition as long as juvenile harvesting was less than 40%. However, some harvesting levels that would be sustainable according to the harvesters were ecologically unsustainable, i.e., eventually causing declines in mangrove population numbers. It was also determined that the structure of mangrove forests was significantly affected by harvesting; even areas harvested at low, ecologically sustainable intensities had significantly fewer adult trees than undisturbed sites. Western Venezuela has no organized timber industry, so mangrove logs are used in many types of construction. A lagging economy and a lack of alternative construction materials make mangrove harvesting inevitable, and for local people, an economic necessity. This creates a trade-off between preserving the ecological characteristics of the mangrove population and responding to human needs. In order to resolve this situation, we recommended a limited and adaptive mangrove harvesting regime. We also suggest that harvesters could participate in community-based management programs as harvesting monitors.

Cradle-to-gate life cycle impacts of redwood forest resource harvesting in northern California

Science.gov (United States)

Han-Sup Han; Elaine Oneil; Richard D. Bergman; Ivan L. Eastin; Leonard R. Johnson

2015-01-01

The first life cycle impact assessment for redwood (Sequoia sempervirens) forest management activities (i.e. a cradle-to-sawmill gate input) including the growing, harvesting, and hauling of redwood sawlogs to a sawmill was completed. In the stump-to-truck timber harvesting analysis, primary transport activities such as skidding and yarding consumed...

Eleventh-century shift in timber procurement areas for the great houses of Chaco Canyon.

Science.gov (United States)

Guiterman, Christopher H; Swetnam, Thomas W; Dean, Jeffrey S

2016-02-02

An enduring mystery from the great houses of Chaco Canyon is the origin of more than 240,000 construction timbers. We evaluate probable timber procurement areas for seven great houses by applying tree-ring width-based sourcing to a set of 170 timbers. To our knowledge, this is the first use of tree rings to assess timber origins in the southwestern United States. We found that the Chuska and Zuni Mountains (>75 km distant) were the most likely sources, accounting for 70% of timbers. Most notably, procurement areas changed through time. Before 1020 Common Era (CE) nearly all timbers originated from the Zunis (a previously unrecognized source), but by 1060 CE the Chuskas eclipsed the Zuni area in total wood imports. This shift occurred at the onset of Chaco florescence in the 11th century, a time with substantial expansion of existing great houses and the addition of seven new great houses in the Chaco Core area. It also coincides with the proliferation of Chuskan stone tools and pottery in the archaeological record of Chaco Canyon, further underscoring the link between land use and occupation in the Chuska area and the peak of great house construction. Our findings, based on the most temporally specific and replicated evidence of Chacoan resource procurement obtained to date, corroborate the long-standing but recently challenged interpretation that large numbers of timbers were harvested and transported from distant mountain ranges to build the great houses at Chaco Canyon.

Effects of variable retention harvesting on natural tree regeneration in Pinus resinosa (red pine) forests

Science.gov (United States)

Margaret W. Roberts; Anthony W. D' Amato; Christel C. Kern; Brian J. Palik

2017-01-01

Concerns over loss of ecosystem function and biodiversity in managed forests have led to the development of silvicultural approaches that meet ecological goals as well as sustain timber production. Variable Retention Harvest (VRH) practices, which maintain mature overstory trees across harvested areas, have been suggested as an approach to balance these objectives;...

Forest growth and timber quality: crown models and simulation methods for sustainable forest management

Science.gov (United States)

Dennis P. Dykstra; Robert A. Monserud

2009-01-01

The purpose of the international conference from which these proceedings are drawn was to explore relationships between forest management activities and timber quality. Sessions were organized to explore models and simulation methodologies that contribute to an understanding of tree development over time and the ways that management and harvesting activities can...

Evaluation of Forest Dynamics Focusing on Various Minimum Harvesting Ages in Multi-Purpose Forest Management Planning

Directory of Open Access Journals (Sweden)

Derya Mumcu Kucuker

2015-04-01

Full Text Available Aim of study: Exploring the potential effects of various forest management strategies on the ability of forest ecosystems to sequester carbon and produce water has become of great concern among forest researchers. The main purpose of this study is to evaluate the effects of management strategies with different minimum harvesting ages on the amount and monetary worth of carbon, water and timber values. Area of study: The study was performed in the Yalnızçam planning unit located on the northeastern part of Turkey. Material and Methods: A forest management model with linear programming (LP was developed to determine the effects of various minimum harvesting ages. Twenty-four different management strategies were developed to maximize the economic Net Present Value (NPV of timber, water and carbon values in addition to their absolute quantities over time. Amount and NPV of forest values and ending inventory with different minimum harvesting ages were used as performance indicators to assess and thus understand forest dynamics. Main results: Amount and NPV of timber and carbon generally decreased with extended minimum harvesting ages. However, similar trends were not observed for water production values. The results pointed out that the performance of a management strategy depends highly on the development of a management strategy and the initial forest structure aside from the growth rate Research highlights: Minimum harvesting ages affect forest outputs under the same objectives and constraints. Performance of a management strategy highly depends on initial age class structure in addition to the contents of a management strategy.

Harvesting of Non-timber Forest Products by the Local Communities in Mount Halimun-Salak National Park, West Java, Indonesia

Directory of Open Access Journals (Sweden)

Yelin Adalina

2014-09-01

Full Text Available Local communities around the forest need to be involved in securing the sustainability of Mount Halimun Salak National Park (MHSNP, for example through the utilization of non-timber forest products (NTFPs such as flora in the utilization zone. This research was aimed to provide data and information about 3 kinds of vegetation producing resin (Pinus merkusii, Agathis dammara, and Hevea brasiliensis and the harvesting NTFPs by the community in the forest vicinity. The research was conducted in MHSNP, and data were analyzed through quantitative-descriptive. The survey method was employed in the study through interviews of respondents using structured questionnaires.   This study revealed that the vegetations at the stage of tree comprised of the following: (1 Agathis dammara (damar with Importance Value Index (IVI of 276.15% and density of 452 trees ha-1, (2 Pinus merkusii (pine trees with IVI of 300.0% and density of 552 trees ha-1, and (3 Hevea brasiliensis (rubber trees with IVI of 217.42%  and density of 85 trees ha-1. Pine, damar, and rubber sap tapping afforded contribution in 59.18, 4.41, and 60.71%, respectively of the total household incomes. Community involvement in the collection of NTFPs in national parks implicated to the increasing of the forest communities revenue and the forests will be maintained since public can get benefits from forest resources. Forest management should be directed as a producer of NTFPs that can increase the economic income of forest communities with attention to ecological factors. Keywords: Harvesting, non-wood forest products, Mount Halimun-Salak National Park, community around the  forests

PROFIT-PC: a program for estimating maximum net revenue from multiproduct harvests in Appalachian hardwoods

Science.gov (United States)

Chris B. LeDoux; John E. Baumgras; R. Bryan Selbe

1989-01-01

PROFIT-PC is a menu driven, interactive PC (personal computer) program that estimates optimum product mix and maximum net harvesting revenue based on projected product yields and stump-to-mill timber harvesting costs. Required inputs include the number of trees/acre by species and 2 inches diameter at breast-height class, delivered product prices by species and product...

Beliefs about the Potential Impacts of Exploiting Non-Timber Forest Products Predict Voluntary Participation in Monitoring

Science.gov (United States)

Dantas Brites, Alice; Morsello, Carla

2017-06-01

Harvesting and trading non-timber forest products is advocated as a win-win strategy for conservation and development, yet it can produce negative ecological and socioeconomic impacts. Hence, monitoring exploitation outcomes is essential, and participatory monitoring has been suggested to be the most suitable approach. Among possible approaches, participatory monitoring is preferred because it is likely to increase people's awareness and beliefs regarding impacts or potential impacts, thus inducing behavioral changes, although the evidence in this regard is contradictory. We therefore evaluated whether people's beliefs about the potential ecological and socioeconomic impacts of non-timber forest product exploitation increased their likelihood of volunteering to monitor. We studied a community of forest inhabitants in the Brazilian Amazon who harvested and traded a commercially important non-timber forest product. Two methods of data gathering were employed: (i) a survey of 166 adults (51 households) to evaluate people's beliefs and their stated intention to engage in four different monitoring tasks and (ii) four pilot monitoring tasks to evaluate who actually participated. Based on mixed-effects regressions, the results indicated that beliefs regarding both types of impacts could predict participation in certain tasks, although gender, age and schooling were occasionally stronger predictors. On average, people had stronger beliefs about potential socioeconomic impacts than about potential ecological impacts, with the former also predicting participation in ecological data gathering. This finding reinforces the importance of monitoring both types of impacts to help achieve the win-win outcomes originally proposed by non-timber forest product trade initiatives.

Forest owners' timber sales satisfaction

International Nuclear Information System (INIS)

Pammo, R.; Ripatti, P.

2003-01-01

The TTS Institute has carried out a study concerning forest owners' timber sales. The material was collected in 2002 via a mail inquiry that targeted forest owners who sold timber during the years 1997-1999 and 1999-2002. Three quarters of the forest owners sold timber to the same timber buying company during both periods of 1997-1999 and 1999-2002. The most important reasons for selling to the same buyer were that they purchased all timber assortments, reliability and good timber price. Mainly the same reasons also applied when changing the timber buying company. The most sensitive groups to changing timber buyer were 60-69 year old, entrepreneurs, men, and owners of forest holdings between 20-29 hectares, owners of inherited forests and joint forest ownerships. The forest owners assessed the timber buying company's operations and its staff on the basis of the last timber sale. The forest owners gave best values for the timber buyer's reliability, the purchase of all timber assortments and the timber buyers' reputation. The worst values were given for cross-cutting and response to complaints. No less than 95 percent of forest owners were prepared to recommend their timber trade partner to acquaintances, friends or other forest owners. Yet only half of the forest owners recognized that their last timber sale experience would not affect which company will be selected for the nest timber sale process

Remote sensing and GIS application in best harvest management planning in Sultan Idris Shah Forestry Education Centre (SISFEC), UPM

International Nuclear Information System (INIS)

Norizah, K; Hasmadi, I M; Misnah, E O

2014-01-01

This study was carried out in UPM's field centre for education and research. First harvested in the 1960's, this secondary lowland dipterocarp forest should through the second harvest rotation. At the age of 50 years, the timber quality and revenue might decreases. The trees are also a risk to students, researchers and publics. Maintaining the ecosystem sustainability for the continual purpose of education and research, harvesting operation must be commenced by best harvest planning management. Respecting to this study, the application of remotely sensed imagery with the integration of available maps and associated databases have been used. Initially, the interactive feature of SISFEC have been developed in digital terrain model (DTM) identifying the physical and cadastral land classifications information. Several criteria derived from the DTM have been buffered subjected to harvesting practice and mitigation measures for sustainable timber harvesting operation. Eventually, the suitable harvest zones have been determined with total 677.7 ha and 4 km of new extraction road was proposed connecting to the centre of harvesting operation area. Overall, this study has been conducted in respecting the main purpose of this forest. Balance between the sustainability of the ecosystem and development needs of forest and communities are taken into consideration in strategic planning which is vital for continual usage

Company-Community Logging Contracts in Amazonian Settlements: Impacts on Livelihoods and NTFP Harvests

Directory of Open Access Journals (Sweden)

Mary C. S. Menton

2009-06-01

Full Text Available As a result of government-sponsored colonization, more than 500 000 km2 of the Brazilian Amazon is managed by settlement households. By law, 80% of this land must remain as standing forest. In this study, we examine the potential for timber harvesting through company-community partnerships (CCPs as a means to increase forest-based revenue without compromising household use of non-timber forest products (NTFPs. Using participatory rural appraisal, resource diaries, and household questionnaires, we study the impacts of CCP logging contracts on livelihoods, including household income and NTFP harvests. Our results show that annual household income from the CCP logging is equivalent to more than 8 years of household gross income from agricultural production. We also found that there were no significant differences in NTFP harvests between households with CCP logging and those without. In CCP-logging communities, households caught 11.9 ± 13.6 game animals, totaling 74 ± 88 kg of game meat. In the communities without CCP, households caught 9.5 ± 13.0 game animals, totaling 73 ± 172 kg of game meat. Annual forest fruit harvests averaged 9.8 ± 13.2 kg in CCP-logging communities and 13.5 ± 15.9 kg in non-CCP communities. Overall, the CCPs brought improvements in household income without compromising NTFP harvests.

A combimachine for harvesting of small sized trees; Pienpuun keraeilykaatoon perustuvan harvennuskoneen kehittaeminen

Energy Technology Data Exchange (ETDEWEB)

Lilleberg, R [Metsaeteho, Helsinki (Finland)

1997-12-31

The goal of the project was to develop a combimachine suitable for the harvesting of small sized trees in first thinning. The use of such a machine could considerably decrease harvesting costs in first thinning. The basic idea with the combimachine is, that the same machine both fells the trees and transports the timber to roadside storages. A forwarder was equipped with a lightweight felling device, which also can do the crosscutting and loading. When harvesting undelimbed timber the forwarder could be equipped with a load-compressing device. During the spring 1995 a trial was made with a combimachine in a first thinning stand of pine. An ordinary forwarder was equipped with the `Naarva-grapple` a device for felling, crosscutting and loading. The aim was to test how the felling device is working, to examine time expenditure for two different working methods and to collect data for the further development of the machine. The trial showed a need to add a delimbing feature to the Naarva-grapple. The need for delimbing is based on the fact, obtained during the trial, that productivity in transport of delimbed timber was over 30 % higher than in transport of undelimbed pieces. A device capable of delimbing was designed, and it was ready for a prototype test in December 1995. The idea worked, but also showed a lot of details which have to be redesigned, before the device is ready for manufacturing and marketing

A combimachine for harvesting of small sized trees; Pienpuun keraeilykaatoon perustuvan harvennuskoneen kehittaeminen

Energy Technology Data Exchange (ETDEWEB)

Lilleberg, R. [Metsaeteho, Helsinki (Finland)

1996-12-31

The goal of the project was to develop a combimachine suitable for the harvesting of small sized trees in first thinning. The use of such a machine could considerably decrease harvesting costs in first thinning. The basic idea with the combimachine is, that the same machine both fells the trees and transports the timber to roadside storages. A forwarder was equipped with a lightweight felling device, which also can do the crosscutting and loading. When harvesting undelimbed timber the forwarder could be equipped with a load-compressing device. During the spring 1995 a trial was made with a combimachine in a first thinning stand of pine. An ordinary forwarder was equipped with the `Naarva-grapple` a device for felling, crosscutting and loading. The aim was to test how the felling device is working, to examine time expenditure for two different working methods and to collect data for the further development of the machine. The trial showed a need to add a delimbing feature to the Naarva-grapple. The need for delimbing is based on the fact, obtained during the trial, that productivity in transport of delimbed timber was over 30 % higher than in transport of undelimbed pieces. A device capable of delimbing was designed, and it was ready for a prototype test in December 1995. The idea worked, but also showed a lot of details which have to be redesigned, before the device is ready for manufacturing and marketing

Mushrooms, trees, and money: value estimates of commercial mushrooms and timber in the pacific northwest.

Science.gov (United States)

Alexander, Susan J; Pilz, David; Weber, Nancy S; Brown, Ed; Rockwell, Victoria A

2002-07-01

Wild edible mushrooms are harvested in the forests of the Pacific Northwest, where both trees and mushrooms grow in the same landscape. Although there has been some discussion about the value of trees and mushrooms individually, little information exists about the joint production of, and value for, these two forest products. Through four case studies, the information needed to determine production and value for three wild mushroom species in different forests of the Pacific Northwest is described, and present values for several different forest management scenarios are presented. The values for timber and for mushrooms are site- and species-specific. On the Olympic Peninsula in Washington, timber is highly valued and chanterelles are a low-value product by weight; timber has a soil expectation value (SEV) 12 to 200 times higher than chanterelles. In south-central Oregon, timber and American matsutake mushrooms have the potential to have about the same SEV. In eastern Oregon, timber is worth 20 to 110 times as much as the morels that grow in the forest. Production economics is concerned with choices about how much and what to produce with what resources. The choices are influenced by changes in technical and economic circumstances. Through our description and analysis of the necessary definitions and assumptions to assess value in joint production of timber and wild mushrooms, we found that values are sensitive to assumptions about changes in forest management, yields for mushrooms and trees, and costs.

Non-timber forest products of the North-West District of Guyana

OpenAIRE

Andel, T.R. van

2000-01-01

This thesis describes the use of non-timber forest products (NTFPs) by indigenous peoples of northwest Guyana. Part I contains a general analysis of NTFP harvesting in northwest Guyana Part II is an illustrated field guide of the useful plants encountered. Chapter 1: introduction Chapter 2: floristic composition and vegetation structure of well-drained mixed forest and 20- and 60-year old secondary forests. Previous forest inventories predicted a general low diversity for the North-West Distr...

Changes to timber market

International Nuclear Information System (INIS)

Haluza, I.

2008-01-01

Ten thousands of tree trunks have ended up in the Liptovska Mara lake. The fact that state owned company Lesy SR decided to store the timber in the reservoir as it could not sell it on the market represents a small revolution in the industry. About a year ago timber processing companies were fighting for timber and suddenly it cannot be sold and has to be stored in the reservoir waiting for better times. When the forestry and timber processing industry will not be in such a difficult situation as it is now. Timber, floor and furniture manufacturers claim that the demand for their products and consequently also prices are falling. Some have already started to decrease production and started making redundancies. And when manufacturers complain, the timber suppliers are not happy either. The reason is that the industry has been hit by several blows at the same time. In last three to four years forests in Slovakia, Czech Republic, Austria, Scandinavia and in Canada have suffered several heavy windstorms after which large volumes of timber had to be processed quickly. So there was an excess of timber, particularly spruce. This created an ideal situation for the processing industry where the more agile companies increased their market share and offered timber at more competitive prices. (authors)

Damping in Timber Structures

OpenAIRE

Labonnote, Nathalie

2012-01-01

Key point to development of environmentally friendly timber structures, appropriate to urban ways of living, is the development of high-rise timber buildings. Comfort properties are nowadays one of the main limitations to tall timber buildings, and an enhanced knowledge on damping phenomena is therefore required, as well as improved prediction models for damping. The aim of this work has consequently been to estimate various damping quantities in timber structures. In particular, models h...

Trade-offs between three forest ecosystem services across the state of New Hampshire, USA: timber, carbon, and albedo.

Science.gov (United States)

Lutz, David A; Burakowski, Elizabeth A; Murphy, Mackenzie B; Borsuk, Mark E; Niemiec, Rebecca M; Howarth, Richard B

2016-01-01

Forests are more frequently being managed to store and sequester carbon for the purposes of climate change mitigation. Generally, this practice involves long-term conservation of intact mature forests and/or reductions in the frequency and intensity of timber harvests. However, incorporating the influence of forest surface albedo often suggests that long rotation lengths may not always be optimal in mitigating climate change in forests characterized by frequent snowfall. To address this, we investigated trade-offs between three ecosystem services: carbon storage, albedo-related radiative forcing, and timber provisioning. We calculated optimal rotation length at 498 diverse Forest Inventory and Analysis forest sites in the state of New Hampshire, USA. We found that the mean optimal rotation lengths across all sites was 94 yr (standard deviation of sample means = 44 yr), with a large cluster of short optimal rotation lengths that were calculated at high elevations in the White Mountain National Forest. Using a regression tree approach, we found that timber growth, annual storage of carbon, and the difference between annual albedo in mature forest vs. a post-harvest landscape were the most important variables that influenced optimal rotation. Additionally, we found that the choice of a baseline albedo value for each site significantly altered the optimal rotation lengths across all sites, lowering the mean rotation to 59 yr with a high albedo baseline, and increasing the mean rotation to 112 yr given a low albedo baseline. Given these results, we suggest that utilizing temperate forests in New Hampshire for climate mitigation purposes through carbon storage and the cessation of harvest is appropriate at a site-dependent level that varies significantly across the state.

Collaborative Monitoring of Production and Costs of Timber Harvest Operations in the Brazilian Amazon

Directory of Open Access Journals (Sweden)

Benno Pokorny

2005-06-01

Full Text Available Timber companies and policy makers in the Brazilian Amazon urgently need financial information on forest management. Results from a few experiments, case studies, and surveys have been groundbreaking, but are insufficient. A strategic partnership between timber companies and research organizations is needed to generate additional information. This paper presents a tool for monitoring production and costs of forest operations to facilitate such collaboration. The tool provides useful information for companies and, at the same time, generates reliable data for research. Selected results are presented on production, capacity, and costs to demonstrate the usefulness of the information that can be generated. These results are based on the first 2 years of implementation by a company in the State of Pará, Brazil. This pilot project confirmed that the tool is simple and relevant. Its successful implementation requires significant investment, and will be applicable only to companies interested in changing from conventional logging to reduced-impact logging, especially those seeking Forest Stewardship Council certification. Successful implementation of the tool will also depend on it generating readily understood and highly relevant results for the companies, and receiving extensive support during the first 2 years.

Leakage Implications for European Timber Markets from Reducing Deforestation in Developing Countries

Directory of Open Access Journals (Sweden)

Mattias Boman

2012-08-01

Full Text Available Forest management strategies and policies such as REDD (reduced emissions from deforestation and forest degradation may have unintentional implications for forest sectors in countries not targeted by such policies. The success of a policy effort like REDD would result in a significant reduction in deforestation and forest degradation and an ensuing reduction in the supply of natural forest timber production within participating countries. This could in turn result in price increases, inducing a supply response outside project boundaries with possible implications for forest management as well as global carbon emissions. This paper reviews the literature to discern potential timber market implications for countries sourcing wood products from developing countries affected by REDD related conservation efforts. The literature reviewed shows varying degrees of market effects leakage—policy actions in one place creating incentives for third parties to increase timber harvesting elsewhere through the price mechanism—ranging from negligible to substantial. However, wood products in the studies reviewed are dealt with on quite an aggregated scale and are assumed to be more or less perfect substitutes for wood products outside conservation effort boundaries. The review suggests that a thorough mapping of the end-uses of tropical timber is needed to comprehensively analyze impacts on wood-product markets in regions such as Europe from conservation efforts in tropical developing countries. The types of tropical timber expected to be affected, in which applications they are used, which are the most likely substitutes and where they would be sourced, are issues that, along with empirical analysis of supply and demand price elasticities and degree of substitutability, should be investigated when assessing the overall effectiveness of REDD.

Avaliação das condições de segurança do trabalho na colheita e transporte florestal em propriedades rurais fomentadas no Estado do Espírito Santo Evaluation of work safety conditions of timber harvesting and transport in fomented farms of the state of Espírito Santo, Brazil

Directory of Open Access Journals (Sweden)

Juliana Lorensi do Canto

2007-01-01

Full Text Available Este trabalho foi desenvolvido com informações obtidas de 70 proprietários rurais fomentados, responsáveis por 90 contratos de fomento florestal, com o objetivo de caracterizar as condições de segurança do trabalho na colheita e transporte florestal, em propriedades rurais fomentadas no Estado do Espírito Santo. A área fomentada por contrato variava entre 1,5 e 100,0 ha, sendo de até 30 ha em 86,7% dos contratos e com relevo montanhoso em 61,2%. A colheita e transporte florestais foram terceirizados em 70 e 80% dos contratos amostrados, respectivamente, e realizados por conta dos proprietários nos demais. A maioria dos prestadores de serviço terceirizados era contratada informalmente. Foi empregada a mão-de-obra contratada na maioria dos contratos com colheita própria, sendo a maior parte não qualificada e contratada informalmente. Grande parte dos trabalhadores deslocava-se por conta própria até o local de colheita. Ocorreram acidentes de trabalho em 16,3% dos contratos, sendo 60% na colheita e transporte florestal próprios. A maioria dos acidentes aconteceu na atividade de corte e atingiu, principalmente, os membros inferiores e superiores do trabalhador acidentado. Os trabalhadores não utilizavam equipamentos de proteção individual em 62,1% dos contratos com colheita própria e em 23,0% dos terceirizados. Observou-se carência de material de primeiros socorros, bem como falta de instrução para o socorro de trabalhadores acidentados na colheita florestal.This research was developed with data obtained from 70 fomented farm owners in the State of Espírito Santo, Brazil, who were responsible for 90 forest contracts distributed in 22 cities of the State. The area fomented per contract ranged from 1.5 to 100 hectares, being 84.8% of contracts up to 30 ha and 59.8% with mountainous relief. Timber harvesting and log transport were outsourced and carried out by a subcontractor in 70% and 80% of the contracts respectively

Defoliation and bark harvesting affect life-history traits of a tropical tree

DEFF Research Database (Denmark)

Gaoue, Orou; Horvitz, Carol; Ticktin, Tamara

2013-01-01

Selectively harvesting whole individuals in managed populations (e.g. fisheries, hunting) has substantial effects on life expectancy and age at maturity. Although demographic rates of trees are impacted by recurrent harvest of plant organs (e.g. fruit, leaf, bark) known as non-timber forest...... of life expectancy to perturbation of vital rates to the elasticities of population growth rate, emphasizing how the two kinds of elasticity address distinct biological issues and management goals. Life expectancy was shorter and reproduction delayed in the dry than in the moist region, indicating a cost...... of drought to life-history traits. Harvesting at constant rates only affects (increased) life expectancy in the moist region and (reduced) age at first reproduction in the dry region. Models in which harvest intensity varies stochastically over time show results similar to those with constant harvesting rate...

Timber Products Supply and Demand

Science.gov (United States)

Jeffrey P. Prestemon; Robert C. Abt

2002-01-01

This chapter describes historical, current, and projected timber inventories and timber product outputs from southern forests. It also attempts to place these quantities in national and international perspectives. Timber is the most valuable commercial commodity taken from most forests, and its removal strongly influences the character of those forests. Timber is...

Timber value—a matter of choice: a study of how end use assumptions affect timber values.

Science.gov (United States)

John H. Beuter

1971-01-01

The relationship between estimated timber values and actual timber prices is discussed. Timber values are related to how, where, and when the timber is used. An analysis demonstrates the relative values of a typical Douglas-fir stand under assumptions about timber use.

Timber management planning with timber ram and goal programming

Science.gov (United States)

Richard C. Field

1978-01-01

By using goal programming to enhance the linear programming of Timber RAM, multiple decision criteria were incorporated in the timber management planning of a National Forest in the southeastern United States. Combining linear and goal programming capitalizes on the advantages of the two techniques and produces operationally feasible solutions. This enhancement may...

Efeito do tempo de experiência de operadores de Harvester no rendimento operacional Effect of time experience of Harvester operators in operating yield

Directory of Open Access Journals (Sweden)

Elaine Cristina Leonello

2012-12-01

Full Text Available A mecanização da colheita de madeira permite maior controle dos custos e pode proporcionar reduções em prazos relativamente curtos. Além disso, tem um lugar de destaque na humanização do trabalho florestal e no aumento do rendimento operacional. O presente trabalho teve por objetivo avaliar o desempenho de operadores de harvester em função do tempo de experiência na atividade. Foram avaliados oito operadores do sexo masculino, com idade entre 23 e 46 anos. O estudo consistiu na análise do volume de madeira colhida pelo harvester. O tempo de experiência afeta significativamente o rendimento operacional dos operadores de harvester. Tal rendimento aumenta expressivamente nos primeiros 18 meses de experiência, mantendo-se em ascensão nos próximos 26 meses. Após os 44 meses de experiência, o rendimento dos operadores tende a reduzir, revelando as possíveis acomodações do cotidiano. Tais resultados permitem concluir que por volta dos 50 meses de experiência na atividade de operação de harvester, se faz necessária a adoção de medidas de reciclagem, motivação, entre outras, a fim de proporcionar aos operadores melhores condições de trabalho que os possibilitem continuar exercendo a atividade de forma eficiente e rentável à empresa.The mechanization of timber harvesting allows greater control of costs and can provide reductions in relatively short intervals. Moreover, it has a place in the humanization of the working forest and the increase in performance. This work provides comparisons of operating performance of different operator harvester according to the time of experience in the activity. The operators evaluated were eight males, aged between 23 and 46 years old. The study consisted of analysis of the volume of timber harvested by the harvester. The experience significantly affects the performance of harvesters operators. The performance increases significantly in the first 18 months of experience, and it remained on

Managing timber to promote sustainable forests: a second-level course for the Sustainable Forestry Initiative of Pennsylvania

Science.gov (United States)

James C. Finley; Susan L. Stout; Timothy G. Pierson; Barbara J. McGuinness

2007-01-01

At least 80 percent of the raw material used for wood products by the forest industry is from privately owned woodlands. This publication provides material for a course designed to help landowners, foresters, and loggers work together to assess whether a planned timber harvest will retain the diversity of species on site. It includes methods for collecting overstory...

The 1993 RPA timber assessment update

Science.gov (United States)

Richard W. Haynes; Darius M. Adams; John R. Mills

1995-01-01

This update reports changes in the Nation's timber resource since the 1989 RPA timber assessment. The timber resource situation is analyzed to provide projections for future cost and availability of timber products to meet demands. Prospective trends in demands for and supplies of timber, and the factors that affect these trends are examined. These include changes...

Global sustainable timber supply and demand

Science.gov (United States)

Peter J. Ince

2010-01-01

Industrial timber use has provided timber revenue that has helped make timber supply and demand more sustainable in the leading timber producing regions of the world. Sustainable development implies not consuming more resources today than we can replace tomorrow, but sustainable forest management implies more than merely a non-declining supply of timber. Forests as a...

Public Preferences for Timber Harvesting on Private Forest Land Purchased for Public Ownership in Maine

Science.gov (United States)

Kevin J. Boyle; Mario F. Teisl

1999-01-01

Public concern over the use, the management, and the protection of forests in Maine and throughout the United States has grown rapidly over the last two decades. Decisions regarding where, when, and how to cut timber are no longer purely silvicultural decisionlS made by forest managers, but are increasingly subject to public scrutiny, debate, regulation, and litigation...

Governance of private forests in Eastern and Central Europe: An analysis of forest harvesting and management rights

Directory of Open Access Journals (Sweden)

Laura Bouriaud

2013-05-01

Full Text Available A property rights-based approach is proposed in the paper to underlinethe common characteristics of the forest property rights specificationin ten ECE countries, the specific patterns governing the harvesting of timber in private forestry and the role of the forest management planning in determining the content of the property rights. The analysis deals with the private forests of the individuals (non industrial ownership from ten countries, covering 7.3 million ha and producing yearly some 25 million timber. The study shows that the forest management rights in private forests belong to the State and that the withdrawal rights on timber, yet recognized in the forest management plans, are in reality strongly restricted from aneconomic viewpoint. The forest management planning is the key instrument of the current forest governance system, based on top-down, hierarchically imposed and enforced set of compulsory rules on timber harvesting. With few exceptions, the forest owners’ have little influence in the forest planning and harvesting. The rational and State-lead approach of the private forest management has serious implications not only on the economic content of the property rights, but also on the learning and adaptive capacity of private forestry to cope with current challenges such the climate change, the increased industry needs for wood as raw material, or the marketingof innovative non wood forest products and services. The study highlights that understanding and comparing the regime of the forest ownership require a special analysis of the economic rights attached to each forest attribute; and that the evolution towards more participatory decision-making in the local forest governance can not be accurately assessed in ECE region without a proper understanding of the forest management planning process.

Governance of private forests in Eastern and Central Europe: An analysis of forest harvesting and management rights

Directory of Open Access Journals (Sweden)

Laura Bouriaud

2013-07-01

Full Text Available A property rights-based approach is proposed in the paper to underline the common characteristics of the forest property rights specification in ten ECE countries, the specific patterns governing the harvesting of timber in private forestry and the role of the forest management planning in determining the content of the property rights. The analysis deals with the private forests of the individuals (non industrial ownership from ten countries, covering 7.3 million ha and producing yearly some 25 million m3 timber. The study shows that the forest management rights in private forests belong to the State and that the withdrawal rights on timber, yet recognised in the forest management plans, are in reality strongly restricted from an economic viewpoint. The forest management planning is the key instrument of the current forest governance system, based on top-down, hierarchically imposed and enforced set of compulsory rules on timber harvesting. With few exceptions, the forest owners’ have little influence in the forest planning and harvesting. The rational and State-lead approach of the private forest management has serious implications not only on the economic content of the property rights, but also on the learning and adaptive capacity of private forestry to cope with current challenges such the climate change, the increased industry needs for wood as raw material, or the marketing of innovative non wood forest products and services. The study highlights that understanding and comparing the regime of the forest ownership require a special analysis of the economic rights attached to each forest attribute; and that the evolution towards more participatory decision-making in the local forest governance can not be accurately assessed in ECE region without a proper understanding of the forest management planning process. 

Soil organic matter and nitrogen cycling in response to harvesting, mechanical site preparation, and fertilization in a wetland with a mineral substrate

Science.gov (United States)

James W. McLaughlin; Margaret R. Gale; Martin F. Jurgensen; Carl C. Trettin

2000-01-01

Forested wetlands are becoming an important timber resource in the Upper Great Lakes Region of the US. However, there is limited information on soil nutrient cycling responses to harvesting and post-harvest manipulations (site preparation and fertilization). The objective of this study was to examine cellulose decomposition, nitrogen mineralization, and soil solution...

Impact of Imported Chinese Furniture on The Local Furniture Sector in Arusha City, Tanzania: Focusing on the Strategies of Furniture-Makers for Using Indigenous Timber Species

OpenAIRE

OGAWA, Sayaka

2018-01-01

The aim of this paper is to elucidate the strategies used by Tanzanian furnituremakers to deal with price competition from Chinese imported furniture by examining the changes in the local use of timber, which is becoming scarce due to destructive harvesting. Chinese furniture flowing into Tanzania is not only of a fashionable design but it is also cheap because it is constructed from low-quality timber and alternative materials. Small-scale Tanzanian furniture-makers operate their business ba...

Natural and Anthropogenic Causes of Accelerated Sediment Accumulation Rates in Nehalem Bay Salt Marshes, Oregon

Science.gov (United States)

Molino, G. D.; Wheatcroft, R. A.; Peck, E. K.; Brophy, L.

2016-12-01

Vertical sediment accretion in estuarine salt marshes occurs as sediments settle out of the water column and onto marsh soils during periods of tidal inundation - thus accretion is influenced by both relative sea level rise (RSLR) and sediment flux to the estuary. Oregon estuaries are understudied compared to their East and Gulf Coast counterparts, but provide a unique opportunity to disentangle these effects. A broader study in three Oregon estuaries (Peck et al., this session) indicates RSLR as the dominant factor controlling sedimentation rates. Working in Nehalem Bay (northern Oregon coast), replicate sediment cores were taken along several transects across an elevation gradient for analysis of sediment and carbon accumulation using CT scans, gamma detection of Pb-210, X-Ray Fluorescence (XRF) and Loss-on-Ignition (LOI). Preliminary results indicate sediment accumulation rates over the past century are higher than rates seen in other comparable Oregon salt marshes; this is consistent with past studies and preliminary analysis of remote sensing data that show significant horizontal expansion of Nehalem marshes. A number of possible causes for the high sediment accumulation rates - hydroclimate of Nehalem River, extensive timber harvesting, forest fires such as the so-called Tillamook Burns, and diking of adjacent marshes - are being explored.

Traditional timber frames

NARCIS (Netherlands)

Jorissen, A.J.M.; Hamer, den J.; Leijten, A.J.M.; Salenikovich, A.

2014-01-01

Due to new possibilities traditional timber framing has become increasingly popular since the beginning of the 21e century. Although traditional timber framing has been used for centuries, the expected mechanical behaviour is not dealt with in great detail in building codes, guidelines or text

Timber resources of southwest Oregon.

Science.gov (United States)

Patricia M. Bassett

1979-01-01

This report presents statistics from a 1973 inventory of timber resources of Douglas County and from a 1974 inventory of timber resources of Coos, Curry, Jackson, and Josephine Counties, Oregon. Tables presented are of forest area and of timber volume, growth, and mortality.

Development of Timber Property Classification Based on the End-Use with Reference to Twenty Sri Lankan Timber Species

Directory of Open Access Journals (Sweden)

ND Ruwanpathirana

2014-06-01

Full Text Available An investigation was carried out on selected 20 timber species of Sri Lanka to study different wood properties, i.e., wood density, modulus of rapture, modulus of elasticity, compression parallel to grain, shrinkage/movement, workability (sawing, nailing, sanding and finishing, treatability of preservative, timber durability, timber texture by vessel diameter and some gross properties, timber colour and present timber uses. Based on the results, an attempt was made to classify the studied timber species into property levels. The final objective of this study was to develop relationships between the end-uses of timber and their property requirements and levels with reference to 20 Sri Lankan timber species.   Timber selection for the use in Sri Lanka is species-oriented and sometimes it is based on the traditional use. Based on wood properties of 20 Sri Lankan timber species selected, an attempt was made to recognise the most important wood properties and their levels to develop a four end-use property classification. In general, the proposed end-use property classification in this study could be differentiated as (i. for building construction, (ii. for furniture and joinery (iii. for light construction, and (iv. for miscellaneous uses. Among the selected timber species, Dipterocarpus zeylanicus is eminently suitable for under-water work. Eucalyptus microcorys is regarded as one of the best timbers for dancing floors. These specialty and causative factors of timber, however, must be explored and documented in order to prepare end-use property classification for miscellaneous use.

Accuracy in estimation of timber assortments and stem distribution - A comparison of airborne and terrestrial laser scanning techniques

Science.gov (United States)

Kankare, Ville; Vauhkonen, Jari; Tanhuanpää, Topi; Holopainen, Markus; Vastaranta, Mikko; Joensuu, Marianna; Krooks, Anssi; Hyyppä, Juha; Hyyppä, Hannu; Alho, Petteri; Viitala, Risto

2014-11-01

Detailed information about timber assortments and diameter distributions is required in forest management. Forest owners can make better decisions concerning the timing of timber sales and forest companies can utilize more detailed information to optimize their wood supply chain from forest to factory. The objective here was to compare the accuracies of high-density laser scanning techniques for the estimation of tree-level diameter distribution and timber assortments. We also introduce a method that utilizes a combination of airborne and terrestrial laser scanning in timber assortment estimation. The study was conducted in Evo, Finland. Harvester measurements were used as a reference for 144 trees within a single clear-cut stand. The results showed that accurate tree-level timber assortments and diameter distributions can be obtained, using terrestrial laser scanning (TLS) or a combination of TLS and airborne laser scanning (ALS). Saw log volumes were estimated with higher accuracy than pulpwood volumes. The saw log volumes were estimated with relative root-mean-squared errors of 17.5% and 16.8% with TLS and a combination of TLS and ALS, respectively. The respective accuracies for pulpwood were 60.1% and 59.3%. The differences in the bucking method used also caused some large errors. In addition, tree quality factors highly affected the bucking accuracy, especially with pulpwood volume.

Section of mechanized timbering

Energy Technology Data Exchange (ETDEWEB)

Balaganskiy, S Ye; Aksanov, Sh I; Ardashev, K A; Mednik, L Ye; Mikhaylov, P G

1980-09-05

A section of mechanized timbering is claimed which contains a base, roof timber, hydraulic stand, hydraulic packing cylinders, packing telescopic shield hinged to the roof timber by means of guides. To improve the reliability of forming the filling massif, the packing telescopic shield is made in the form of individual telescopic beams with guards which are interconnected by means of cross beams, while the gaps between the telescopic beams are covered with elasic plates.

In-stand scenic beauty of variable retention harvests and mature forests in the U.S. Pacific Northwest: the effects of basal area, density, retention pattern and down wood

Science.gov (United States)

R.G. Ribe

2009-01-01

Tensions between amenity- and timber-based economies in the U.S. and Canadian Pacific Northwest motivated a study of scenic beauty inside mature forests and timber harvests. A diverse sample of regional forests, measures of forest structure, and large, representative samples of photographs and public judges were employed to measure scenic beauty inside unharvested...

Mapping wildfire and clearcut harvest disturbances in boreal forests with Landsat time series data

Science.gov (United States)

Todd Schroeder; Michael A. Wulder; Sean P. Healey; Gretchen G. Moisen

2011-01-01

Information regarding the extent, timing andmagnitude of forest disturbance are key inputs required for accurate estimation of the terrestrial carbon balance. Equally important for studying carbon dynamics is the ability to distinguish the cause or type of forest disturbance occurring on the landscape. Wildfire and timber harvesting are common disturbances occurring in...

The Timber Resource Inventory Model (TRIM): a projection model for timber supply and policy analysis.

Science.gov (United States)

P.L. Tedder; R.N. La Mont; J.C. Kincaid

1987-01-01

TRIM (Timber Resource Inventory Model) is a yield table projection system developed for timber supply projections and policy analysis. TRIM simulates timber growth, inventories, management and area changes, and removals over the projection period. Programs in the TRIM system, card-by-card descriptions of required inputs, table formats, and sample results are presented...

The timber resources of Rhode Island

Science.gov (United States)

Roland H. Ferguson; John R. McGuire; John R. McGuire

1957-01-01

This is a report on the first comprehensive survey ever made of the timber resources of Rhode Island. It shows, for the years 1952 and 1953, the area and condition of the forest land, the volume and quality of standing timber, the rates of timber growth and mortality, and the extent of timber cutting for forest products. The survey was made by the Forest Service as...

Timber Curtain

DEFF Research Database (Denmark)

2015-01-01

Timber Curtain is a site specific architectural installation, which is part of a research project conducted at the Aarhus School of Architecture as collaboration between Ph.D. and associate professor Niels Martin Larsen and the author. Through a digitally scripted associative model we performed s...... of pinewood timber, machined with a CMS Antares 5-axis CNC router. The digital process generation and simulation was implemented with Rhinoceros 3D, Grasshopper and GHPython, and AlphaCAM was used for preparing the CNC-routing....

Probabilistic modeling of timber structures

DEFF Research Database (Denmark)

Köhler, Jochen; Sørensen, John Dalsgaard; Faber, Michael Havbro

2007-01-01

The present paper contains a proposal for the probabilistic modeling of timber material properties. It is produced in the context of the Probabilistic Model Code (PMC) of the Joint Committee on Structural Safety (JCSS) [Joint Committee of Structural Safety. Probabilistic Model Code, Internet...... Publication: www.jcss.ethz.ch; 2001] and of the COST action E24 ‘Reliability of Timber Structures' [COST Action E 24, Reliability of timber structures. Several meetings and Publications, Internet Publication: http://www.km.fgg.uni-lj.si/coste24/coste24.htm; 2005]. The present proposal is based on discussions...... and comments from participants of the COST E24 action and the members of the JCSS. The paper contains a description of the basic reference properties for timber strength parameters and ultimate limit state equations for timber components. The recommended probabilistic model for these basic properties...

Timber in Bridge Structures

OpenAIRE

Detkin, Viktoria

2016-01-01

The purpose of this final year project was to study the properties of timber as a structural material and the suitability of wood in load bearing members for bridge structures. For a case study, an existing timber bridge was selected. Due to its condition the bridge should be replaced. The design of a new bridge with steel beams holding a glulam deck was made. During the case study the replacement of steel beams by glulam timber ones was discussed. Some calculations were made in order to ...

Alabama's timber industry - an assessment of timber product output and use, 1995

Science.gov (United States)

Tony G. Johnson; Jim R. Gober; J. Stephen Nix

1998-01-01

Output of Industrial Timber Products.Note: The reader must understand that certain terms, namely-retained, export, import, production, and receipts-have specialized meanings and relationships. unique to the Forest Inventory and Analysis Units across the country that deal with timber products output.In 1995, the combined...

Estimated timber harvest by U.S. region and ownership, 1950-2002.

Science.gov (United States)

Darius M. Adams; Richard W. Haynes; Adam J. Daigneault

2006-01-01

This publication provides estimates of total softwood and hardwood harvests by region and owner for the United States from 1950 to 2002. These data are generally not available in a consistent fashion and have to be estimated from state-level data, forest resource inventory statistics, and production of forest products. This publication describes the estimation process...

Hydrologic and climatic changes in three small watersheds after timber harvest.

Science.gov (United States)

W.B. Fowler; J.D. Helvey; E.N. Felix

1987-01-01

No significant increases in annual water yield were shown for three small watersheds in northeastern Oregon after shelterwood cutting (30-percent canopy removal, 50-percent basal area removal) and clearcutting. Average maximum air temperature increased after harvest and average minimum air temperature decreased by up to 2.6 °C. Both maximum and minimum water...

timber for structural use

African Journals Online (AJOL)

HOD

Logs of Apa timber were air-dried and along the stem, 324 pieces of test specimens were ..... (machine) manual with the load rate of 1mm/min ..... [16] Desch, H. E., Timber properties, 6th. Edition,. Revised by J. M. Dinwoodie. Macmillan ...

LEVERAGING RURAL LIVELIHOODS WITH FOREST CONSERVATION IN NIGERIA: THE ROLE OF NON-TIMBER FOREST PRODUCTS

Directory of Open Access Journals (Sweden)

Egbe BASSEY ETOWA

2015-03-01

Full Text Available In recent times some economists view Non-Timber Forest Products (NTFPs extraction and marketing as a better alternative to timber exploitation as a rural livelihood strategy. Harvesting and sale of NTFPs have the potential for accomplishing the dual goals of natural forest conservation and income generation for the rural inhabitants. Meanwhile, realization of these dual goals in Nigeria, require an understanding of how NTFPs functions in the face of marketing, ecological, geographic and institutional constraints. Following a conceptualization of NTFPs, this paper provides a vivid overview of the simultaneous roles of NTFPs in rural livelihood enhancement and forest conservation in Nigeria. It highlights governmental initiatives with respect to conservation, the challenges and prospects of NTFPs as a conservation strategy. Conclusively, the paper suggests that appropriate NTFPs development policies are required to simultaneously address forest depletion and poverty in rural areas of Nigeria.

The impact of ultraviolet radiation on timber

International Nuclear Information System (INIS)

Dawson, B.

1993-01-01

Photochemical degradation of timber, the outcome of exposure of timber to ultraviolet radiation, is a light induced chemical and physical decay. Timber is a collection of dead wood cells. Impacts of radiation on the growing tree are therefore outside the scope of this paper, which is primarily concerned with timber as a material. (author). 5 refs. 2 figs

Harvesting of Non-timber Forest Products by the Local Communities in Mount Halimun-Salak National Park, West Java, Indonesia

Directory of Open Access Journals (Sweden)

Yelin Adalina

2014-08-01

Full Text Available Local communities around the forest need to be involved in securing the sustainability of Mount Halimun Salak National Park (MHSNP, for example through the utilization of non-timber forest products (NTFPs such as flora in the utilization zone. This research was aimed to provide data and information about 3 kinds of vegetation producing resin (Pinus merkusii, Agathis dammara, and Hevea brasiliensis and the harvesting NTFPs by the community in the forest vicinity. The research was conducted in MHSNP, and data were analyzed through quantitative-descriptive. The survey method was employed in the study through interviews of respondents using structured questionnaires. This study revealed that the vegetations at the stage of tree comprised of the following: (1 Agathis dammara (damar with Importance Value Index (IVI of 276.15% and density of 452 trees ha-1, (2 Pinus merkusii (pine trees with IVI of 300.0% and density of 552 trees ha-1, and (3 Hevea brasiliensis (rubber trees with IVI of 217.42% and density of 85 trees ha-1. Pine, damar, and rubber sap tapping afforded contribution in 59.18, 4.41, and 60.71%, respectively of the total household incomes. Community involvement in the collection of NTFPs in national parks implicated to the increasing of the forest communities revenue and the forests will be maintained since public can get benefits from forest resources. Forest management should be directed as a producer of NTFPs that can increase the economic income of forest communities with attention to ecological factors.

Monitoring of timber structures: Editorial

OpenAIRE

Kurz, Jochen Horst

2015-01-01

Timber structures have been in use for centuries, with proven durability. In recent years, timber has become particularly important, due to its standing as a truly renewable material for construction and carbon storage purposes. The material behaviour of wood is known and understood. The current design concepts for timber structures are also well developed. Nevertheless, the underlying processes of the ageing and deterioration of wood are complex, and the anisotropic structure of wood require...

Assessing Bioenergy Harvest Risks: Geospatially Explicit Tools for Maintaining Soil Productivity in Western US Forests

Directory of Open Access Journals (Sweden)

Deborah Page-Dumroese

2011-09-01

Full Text Available Biomass harvesting for energy production and forest health can impact the soil resource by altering inherent chemical, physical and biological properties. These impacts raise concern about damaging sensitive forest soils, even with the prospect of maintaining vigorous forest growth through biomass harvesting operations. Current forest biomass harvesting research concurs that harvest impacts to the soil resource are region- and site-specific, although generalized knowledge from decades of research can be incorporated into management activities. Based upon the most current forest harvesting research, we compiled information on harvest activities that decrease, maintain or increase soil-site productivity. We then developed a soil chemical and physical property risk assessment within a geographic information system for a timber producing region within the Northern Rocky Mountain ecoregion. Digital soil and geology databases were used to construct geospatially explicit best management practices to maintain or enhance soil-site productivity. The proposed risk assessments could aid in identifying resilient soils for forest land managers considering biomass operations, policy makers contemplating expansion of biomass harvesting and investors deliberating where to locate bioenergy conversion facilities.

Optimizing wildlife habitat quality and oak regeneration in bottomland hardwoods using midstory control and partial harvests

Science.gov (United States)

Derek K. Alkire; Andrew W. Ezell; Andrew B. Self

2011-01-01

Bottomland hardwoods can provide both wildlife habitat and timber. However, past high-grading practices limit future income potential and have resulted in undesirable species composition in many areas. Thus, prevalence of desirable oak species should be increased. Our study will attempt to determine the proper harvest level for bottomland hardwoods which will optimize...

Esthetic evaluation of timber harvesting in the Northern Rockies - a progressive report

Science.gov (United States)

Dennis L. Schweitzer; James R. Ullrich; Robert E. Benson

1976-01-01

Panels of judges have been evaluating the esthetic dimension of harvested areas in the Northern Rockies. Studies conducted in Wyoming and Montana agree with intuition in that forest scenes are generally liked less as the evidence of man's activities increases.

Community solar salt production in Goa, India.

Science.gov (United States)

Mani, Kabilan; Salgaonkar, Bhakti B; Das, Deepthi; Bragança, Judith M

2012-12-01

Traditional salt farming in Goa, India has been practised for the past 1,500 years by a few communities. Goa's riverine estuaries, easy access to sea water and favourable climatic conditions makes salt production attractive during summer. Salt produced through this natural evaporation process also played an important role in the economy of Goa even during the Portuguese rule as salt was the chief export commodity. In the past there were 36 villages involved in salt production, which is now reduced to 9. Low income, lack of skilled labour, competition from industrially produced salt, losses incurred on the yearly damage of embankments are the major reasons responsible for the reduction in the number of salt pans.Salt pans (Mithagar or Mithache agor) form a part of the reclaimed waterlogged khazan lands, which are also utilised for aquaculture, pisciculture and agriculture. Salt pans in Goa experience three phases namely, the ceased phase during monsoon period of June to October, preparatory phase from December to January, and salt harvesting phase, from February to June. After the monsoons, the salt pans are prepared manually for salt production. During high tide, an influx of sea water occurs, which enters the reservoir pans through sluice gates. The sea water after 1-2 days on attaining a salinity of approximately 5ºBé, is released into the evaporator pans and kept till it attains a salinity of 23 - 25ºBé. The brine is then released to crystallizer pans, where the salt crystallises out 25 - 27ºBé and is then harvested.Salt pans form a unique ecosystem where succession of different organisms with varying environmental conditions occurs. Organisms ranging from bacteria, archaea to fungi, algae, etc., are known to colonise salt pans and may influence the quality of salt produced.The aim of this review is to describe salt farming in Goa's history, importance of salt production as a community activity, traditional method of salt production and the biota

Cost and productivity of new technology for harvesting and in-woods processing small-diameter trees.

Science.gov (United States)

Michael B Lambert; James O. Howard

1990-01-01

A study was conducted on the productivity and cost of an integrated harvesting and processing system operating in small-diameter timber (western hemlock-type) on the Olympic Peninsula of western Washington. The system uses a new steep-slope fellerbuncher, a clam-bunk grapple-skidder (forwarder), a prototype chain-flail debarker delimber, a chipper, a conveyor system,...

The secret life of microbes: soil bacteria and fungi undaunted by the harvesting of fire-killed trees

Science.gov (United States)

Paul Meznarich; Jane Smith; Tara Jennings

2013-01-01

Soil health is fundamental to ecosystem health. Disturbances such as fire and timber harvesting can affect the abundance, activity, and composition of soil microbial communities and thus affect soil productivity. In response to forest managers, scientists with the Pacific Northwest Research Station compared health and productivity indicators between soils disturbed by...

Curved Folded Plate Timber Structures

OpenAIRE

Buri, Hans Ulrich; Stotz, Ivo; Weinand, Yves

2011-01-01

This work investigates the development of a Curved Origami Prototype made with timber panels. In the last fifteen years the timber industry has developed new, large size, timber panels. Composition and dimensions of these panels and the possibility of milling them with Computer Numerical Controlled machines shows great potential for folded plate structures. To generate the form of these structures we were inspired by Origami, the Japanese art of paper folding. Common paper tessellations are c...

Nutrient uptake and community metabolism in streams draining harvested and old-growth watersheds: A preliminary assessment

Science.gov (United States)

Brian H. Hill; Frank H. McCormick

2004-01-01

The effect of timber harvesting on streams is assessed using two measures of ecosystem function: nutrient spiraling and community metabolism. This research is being conducted in streams of the southern Appalachian Mountains of North Carolina, the Ouachita Mountains of Arkansas, the Cascade Mountains of Oregon, and the redwood forests of northern California, in order to...

Response of herbaceous plant community diversity and composition to overstorey harvest within riparian management zones in Northern Hardwoods

Science.gov (United States)

Eric K. Zenner; Michelle A. Martin; Brian J. Palik; Jerilynn E. Peck; Charles R. Blinn

2013-01-01

Partial timber harvest within riparian management zones (RMZs) may permit active management of riparian forests while protecting stream ecosystems, but impacts on herbaceous communities are poorly understood. We compared herbaceous plant community abundance, diversity and composition in RMZs along small streams in northern Minnesota, USA, among four treatments before...

The 2005 RPA timber assessment update.

Science.gov (United States)

Richard W. Haynes; Darius M. Adams; Ralph J. Alig; Peter J. Ince; John R. Mills; Xiaoping. Zhou

2007-01-01

This update reports changes in the Nation's timber resource since the Analysis of the Timber Situation in the United States was completed in 2003. Prospective trends in demands for and supplies of timber, and the factors that affect these trends are examined. These trends include changes in the U.S. economy, increased salvage of British Columbia beetle-killed...

Robustness Evaluation of Timber Structures

DEFF Research Database (Denmark)

Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; čizmar, D.

2010-01-01

The present paper outlines results from working group 3 (WG3) in the EU COST Action E55 – ‘Modelling of the performance of timber structures’. The objectives of the project are related to the three main research activities: the identification and modelling of relevant load and environmental...... exposure scenarios, the improvement of knowledge concerning the behaviour of timber structural elements and the development of a generic framework for the assessment of the life-cycle vulnerability and robustness of timber structures....

Inventory analysis of the timber industry in Ghana

NARCIS (Netherlands)

Eshun, J.F.; Potting, J.; Leemans, R.

2010-01-01

Background, aim, and scope The timber sector, i.e., forestry and timber industry, plays an important role in the socioeconomic development of Ghana through timber products export. Timber production in this sector is associated with increasing environmental burdens in terms of use of materials and

Aesthetic Qualities of Cross Laminated Timber

DEFF Research Database (Denmark)

Bejder, Anne Kirkegaard

to its sustainable profile. In parallel to this, new production methods and further refined timber products have been developed. Among these are the engineered timber-based product Cross Laminated Timber (CLT) that show enhanced structural properties compared to unrefined timber. However, the question...... an undefined aesthetic potential that may innovate how we construct and perceive timber architecture, the overall aim of the thesis is to inquire into the architectural and aesthetic qualities of CLT. Through three chapters this thesis examines and discusses 1) the architectural qualities of CLT, 2......) the materiality of CLT, and 3) how one can deal with these qualitative aspects in the design process. This leads to: firstly, the development of an explicit model to help structuring the analysis and evaluation of the materiality of CLT, and secondly, a clarification and articulation of the aesthetic qualities...

Reliability Analysis of Structural Timber Systems

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard; Hoffmeyer, P.

2000-01-01

Structural systems like timber trussed rafters and roof elements made of timber can be expected to have some degree of redundancy and nonlinear/plastic behaviour when the loading consists of for example snow or imposed load. In this paper this system effect is modelled and the statistic...... of variation. In the paper a stochastic model is described for the strength of a single piece of timber taking into account the stochastic variation of the strength and stiffness with length. Also stochastic models for different types of loads are formulated. First, simple representative systems with different...... types of redundancy and non-linearity are considered. The statistical characteristics of the load bearing capacity are determined by reliability analysis. Next, more complex systems are considered modelling the mechanical behaviour of timber roof elements I stressed skin panels made of timber. Using...

CONTEMPORARY SLOVENIAN TIMBER ARCHITECTURE INTERNATIONAL RECOGNIZED

Directory of Open Access Journals (Sweden)

Manja Kitek Kuzman

2014-12-01

Full Text Available The book presents Slovenia' s contemporary timber architecture. Thanks to its abundant forests, Slovenia has preserved the tradition of wood construction. As much as 60% of its surface is covered by forests. Slovenia is also the third most forested country in Europe. The high share of forest-covered surface allows for a sustainable production of high-quality wood. In the past, wood was used primarily in the construction of farm buildings, but now timber architecture is used for everything from residences and office buildings to public buildings such as community centres and schools. Timber construction is becoming increasingly popular. Apart from larger companies taking this approach, a great number of wooden houses have sprung up, built either on personal initiative or with the support of carpenter workshops. Slovenian timber architecture has taken a new approach to environmental and energy-efficiency problems and received great international recognition. The book discusses over fifty projects built over a ten-year period, and includes descriptions, photographs, and plans. The projects include residential areas, administration, and office, as well as tourist, educational, and industrial buildings. Timber architecture is presented as an integral part of the Slovenian landscape. The monograph will be useful to designers and future experts in their planning of optimal timber buildings and will highlight the main benefits of using timber construction.

Projected US timber and primary forest product market impacts of climate change mitigation through timber set-asides

Science.gov (United States)

Prakash Nepal; Peter J. Ince; Kenneth E. Skog; Sun J. Chang

2013-01-01

Whereas climate change mitigation involving payments to forest landowners for accumulating carbon on their land may increase carbon stored in forests, it will also affect timber supply and prices. This study estimated the effect on US timber and primary forest product markets of hypothetical timber set-aside scenarios where US forest landowners would be paid to forego...

Control of borens in mine timbers

Energy Technology Data Exchange (ETDEWEB)

Yule, R A; Kennedy, M J

1978-07-01

The authors studied timber attack in Queensland mines by auger beetles and powder post beetles. When infested timber is taken into a mine the insects thrive at the temperatures (20 to 25 C) and relative humidities (70-90%) they encounter. Seven timber treatments were tested, and all were satisfactory except spraying with wood-preserving oil which contained a moderately effective insecticide.

General notes on ductility in timber structures

NARCIS (Netherlands)

Jorissen, A.J.M.; Fragiacomo, M.

2011-01-01

The paper discusses the implications of ductility in design of timber structures under static and dynamic loading including earthquakes. Timber is a material inherently brittle in bending and in tension, unless reinforced adequately. However connections between timber members can exhibit significant

IMPACTS OF TIMBER LEGALITY VERIFICATION SYSTEM IMPLEMENTATION ON THE SUSTAINABILITY OF TIMBER INDUSTRY AND PRIVATE FOREST

Directory of Open Access Journals (Sweden)

Elvida Yosefi Suryandari

2017-04-01

Full Text Available International market requires producers to proof the legality of their wood products to address the issues of illegal logging and illegal trade. Timber Legality Verification System (TLVS has been prepared by the Government of Indonesia that covering the upstream and downstream wood industries. This paper aims to evaluate gaps in the implementation of TLVS policy and its impact on the sustainability of timber industry. This study was using gap, descriptive and costs-structure analyzes. The study was conducted in three provinces, namely: DKI Jakarta, West Java and D.I. Yogyakarta. Research found that the effectiveness of the TLVS implementation was low due to relatively rapid policy changes. This situation became disincetive for investments in timber business. Private sector perceived that TLVS policy should be applied in the upstream of timber business. Hence, the industry and market in the downstream have not been fully support to this system. Furthermore, TLVS policy implementation was considered ineffective by timber industry as well as private forest managers, especially by micro industry and smallholder private forests. This situation threatened the sustainability of timber industry and private forests. Therefore, Institutions should be strengthened in order to improve the quality of human resources and the competitiveness of products.

Private forest landowners’ harvest and regeneration decisions—effect of proximity to primary wood-using mills

Science.gov (United States)

Consuelo Brandeis

2015-01-01

Ownership of the U.S. southern timberland rests largely on private forest landowners’ hands. As such, their harvest and regeneration choices can significantly impact the region’s roundwood supply. In most cases, private forest landowners do not consider timber production among the top reasons for holding their lands. However, most research indicates that favorable...

A review on environmental education in Myanmar Timber Enterprise

International Nuclear Information System (INIS)

Khin-Zaw

2001-08-01

Environmental education in the Myanmar Timber Enterprise (MTE) began formally in 1996. Environmental considerations had been incorporated in the deparmental instructions and operation manuals of extraction and wood processing since the emergence of MTE, then named STate Timber Board in 1948, but the modern concept of environmental conservation for sustainable development was introduced to the staff of MTE beginning only in 1996. The training contents constitute the defintion of environmental conservation as sustainable development, global environmental awareness, Myanmar's participation in global environmental undertakings, national institution and awareness progammes, the concept of reduced impact logging, code of harvesting, and above all, the environmental impact assessment (EIA) methodology as a tool for environmental management. In the MTE, 20 officers have been trained at a two-week workshop on EIA; 180 trainees from the Extraction Department, mostly the persons in charge of extraction ranges, have been trained at five-day short and mobile trainings on EIA around the country; and 948 officers and subordinate staff have been trained at the vocational training centres of MTE covering the above outline of the course, depending upon the training duration and trainees' rank, up to the end of December, 2000. Evaluation on EIA workshop and some training courses, problems and constraints encountered at the trainings and suggestions sought are also discussed in the paper. (author)

Harvesting Adaptation to Biodiversity Conservation in Sawmill Industry: Technology Innovation and Monitoring Program

Directory of Open Access Journals (Sweden)

Guillermo J. Martínez Pastur

2007-09-01

Full Text Available Social demands related to native forest ecosystems are based on an efficient management, with a balance between conservation and timber production. This paper describes the industry adaptation to a biodiversity program with an alternative regeneration method. The proposed method leaves 30% of the timber-quality forest as aggregated retention and 15 m² ha-1 basal area as dispersed retention. While many costs increased considerably, the incomes also may increase by applying new management strategies and technology innovation. A monitoring program was established in the harvested stands to evaluate the ecological functionality of the applied regeneration system (forest structure, climate change, regeneration dynamics, habitat quality and abiotic cycles. The implementation of an innovated technology and monitoring program in the forest and industry determined a balance between economic values and biodiversity conservation.

Probabilistic Modeling of Timber Structures

DEFF Research Database (Denmark)

Köhler, J.D.; Sørensen, John Dalsgaard; Faber, Michael Havbro

2005-01-01

The present paper contains a proposal for the probabilistic modeling of timber material properties. It is produced in the context of the Probabilistic Model Code (PMC) of the Joint Committee on Structural Safety (JCSS) and of the COST action E24 'Reliability of Timber Structures'. The present...... proposal is based on discussions and comments from participants of the COST E24 action and the members of the JCSS. The paper contains a description of the basic reference properties for timber strength parameters and ultimate limit state equations for components and connections. The recommended...

36 CFR 223.32 - Timber sale operating plan.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Timber sale operating plan... SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER Timber Sale Contracts Contract Conditions and Provisions § 223.32 Timber sale operating plan. Sale contracts with a term of 2 years or more shall provide...

Forest harvest patterns on private lands in the Cascade Mountains, Washington, USA

Science.gov (United States)

Soulard, Christopher E.; Walker, Jessica; Griffith, Glenn E.

2017-01-01

Forests in Washington State generate substantial economic revenue from commercial timber harvesting on private lands. To investigate the rates, causes, and spatial and temporal patterns of forest harvest on private tracts throughout the Cascade Mountains, we relied on a new generation of annual land-use/land-cover (LULC) products created from the application of the Continuous Change Detection and Classification (CCDC) algorithm to Landsat satellite imagery collected from 1985 to 2014. We calculated metrics of landscape pattern using patches of intact and harvested forest in each annual layer to identify changes throughout the time series. Patch dynamics revealed four distinct eras of logging trends that align with prevailing regulations and economic conditions. We used multiple logistic regression to determine the biophysical and anthropogenic factors that influence fine-scale selection of harvest stands in each time period. Results show that private lands forest cover became significantly reduced and more fragmented from 1985 to 2014. Variables linked to parameters of site conditions, location, climate, and vegetation greenness consistently distinguished harvest selection for each distinct era. This study demonstrates the utility of annual LULC data for investigating the underlying factors that influence land cover change.

Forest Harvest Patterns on Private Lands in the Cascade Mountains, Washington, USA

Directory of Open Access Journals (Sweden)

Christopher E. Soulard

2017-10-01

Full Text Available Forests in Washington State generate substantial economic revenue from commercial timber harvesting on private lands. To investigate the rates, causes, and spatial and temporal patterns of forest harvest on private tracts throughout the Cascade Mountains, we relied on a new generation of annual land-use/land-cover (LULC products created from the application of the Continuous Change Detection and Classification (CCDC algorithm to Landsat satellite imagery collected from 1985 to 2014. We calculated metrics of landscape pattern using patches of intact and harvested forest in each annual layer to identify changes throughout the time series. Patch dynamics revealed four distinct eras of logging trends that align with prevailing regulations and economic conditions. We used multiple logistic regression to determine the biophysical and anthropogenic factors that influence fine-scale selection of harvest stands in each time period. Results show that private lands forest cover became significantly reduced and more fragmented from 1985 to 2014. Variables linked to parameters of site conditions, location, climate, and vegetation greenness consistently distinguished harvest selection for each distinct era. This study demonstrates the utility of annual LULC data for investigating the underlying factors that influence land cover change.

Projection of U.S. forest sector carbon sequestration under U.S. and global timber market and wood energy consumption scenarios, 2010-2060

Science.gov (United States)

Prakash Nepal; Peter J. Ince; Kenneth E. Skog; Sun J. Chang

2012-01-01

This study provides a modeling framework to examine change over time in U.S. forest sector carbon inventory (in U.S. timberland tree biomass and harvested wood products) for alternative projections of U.S. and global timber markets, including wood energy consumption, based on established IPCC/RPA scenarios. Results indicated that the U.S. forest sector’s projected...

Legal harvesting, sustainable sourcing and cascaded use of wood for bioenergy : Their coverage through existing certification frameworks for sustainable forest management

NARCIS (Netherlands)

Sikkema, Richard; Junginger, Martin; van Dam, Jinke; Stegeman, Gerben; Durrant, David; Faaij, Andre

2014-01-01

The first objective of this paper was to provide an inventory of developments of certification schemes for sustainable biomass production, following recent EU legislation (both formalized and under development). One main pillar is the EU Timber Regulation for legal harvesting; a second one is the

Long term contracts signed in Slovak timber business

International Nuclear Information System (INIS)

Haluza, I.

2005-01-01

The Slovak timber business is changing. The state-owned company, SR Forests, which cuts more then 50% of Slovak timber has signed long term agreements with major domestic timber processing companies - Smrecina, the Rettenmeier Tatra Timber saw mill in Liptovsky Mikulas and two paper mills - Mondi SCP Ruzomberok and Kappa Sturovo. In the past, only quarterly contracts were signed. Now, for the first time, two-year contracts have been signed that should help the timber processing industry and the forestry sector. The General Director of Lesy SR (SR Forests), Karol Vins, hopes for better sale prices. Company headquarters wants to maintain better control of prices than under the old system of timber sales by its branches. In the opinion of the General Director of the Forestry Section at the Ministry of Agriculture, long term contracts will guarantee a stable delivery of timber to processing companies, giving investors in new production capacity a better position in negotiations with banks regarding financing. According to K. Vins, long term contracts have so far only been negotiated with major timber processing companies which are mostly controlled by foreign capital and therefore have good payment discipline. The Association of the Timber Processing Industry is unhappy regarding developments and Lesy SR has not invited domestic companies to these negotiations

Renewal of Collaborative Research: Economically Viable Forest Harvesting Practices That Increase Carbon Sequestration

Energy Technology Data Exchange (ETDEWEB)

Davidson, E.A.; Dail, D.B., Hollinger, D.; Scott, N.; Richardson, A.

2012-08-02

Forests provide wildlife habitat, water and air purification, climate moderation, and timber and nontimber products. Concern about climate change has put forests in the limelight as sinks of atmospheric carbon. The C stored in the global vegetation, mostly in forests, is nearly equivalent to the amount present in atmospheric CO{sub 2}. Both voluntary and government-mandated carbon trading markets are being developed and debated, some of which include C sequestration resulting from forest management as a possible tradeable commodity. However, uncertainties regarding sources of variation in sequestration rates, validation, and leakage remain significant challenges for devising strategies to include forest management in C markets. Hence, the need for scientifically-based information on C sequestration by forest management has never been greater. The consequences of forest management on the US carbon budget are large, because about two-thirds of the {approx}300 million hectare US forest resource is classified as 'commercial forest.' In most C accounting budgets, forest harvesting is usually considered to cause a net release of C from the terrestrial biosphere to the atmosphere. However, forest management practices could be designed to meet the multiple goals of providing wood and paper products, creating economic returns from natural resources, while sequestering C from the atmosphere. The shelterwood harvest strategy, which removes about 30% of the basal area of the overstory trees in each of three successive harvests spread out over thirty years as part of a stand rotation of 60-100 years, may improve net C sequestration compared to clear-cutting because: (1) the average C stored on the land surface over a rotation increases, (2) harvesting only overstory trees means that a larger fraction of the harvested logs can be used for long-lived sawtimber products, compared to more pulp resulting from clearcutting, (3) the shelterwood cut encourages growth of

Bats of the hardwood ecosystem experiment before timber harvest: assessment and prognosis

Science.gov (United States)

Jeremy J. Sheets; John O. Whitaker; Virgil Jr. Brack; Dale W. Sparks

2013-01-01

Before experimental harvest of the Yellowwood (YW) and Morgan-Monroe (MM) State Forests (Indiana) as part of the Hardwood Ecosystem Experiment, bats were sampled using mist nets at four locations in MM and five locations in YW during each summer 2006 through 2008. Netting locations were adjacent to forest stands scheduled for experimental manipulations following...

Woodland salamander responses to a shelterwood harvest-prescribed burn silvicultural treatment within Appalachian mixed-oak forests

Science.gov (United States)

Ford, W. Mark; Mahoney, Kathleen R.; Russell, Kevin R.; Rodrigue, Jane L.; Riddle, Jason D.; Schuler, Thomas M.; Adams, Mary Beth

2015-01-01

Forest management practices that mimic natural canopy disturbances, including prescribed fire and timber harvests, may reduce competition and facilitate establishment of favorable vegetative species within various ecosystems. Fire suppression in the central Appalachian region for almost a century has contributed to a transition from oak-dominated to more mesophytic, fire-intolerant forest communities. Prescribed fire coupled with timber removal is currently implemented to aid in oak regeneration and establishment but responses of woodland salamanders to this complex silvicultural system is poorly documented. The purpose of our research was to determine how woodland salamanders respond to shelterwood harvests following successive burns in a central Appalachian mixed-oak forest. Woodland salamanders were surveyed using coverboard arrays in May, July, and August–September 2011 and 2012. Surveys were conducted within fenced shelterwood-burn (prescribed fires, shelterwood harvest, and fencing to prevent white-tailed deer [Odocoileus virginianus] herbivory), shelterwood-burn (prescribed fires and shelterwood harvest), and control plots. Relative abundance was modeled in relation to habitat variables measured within treatments for mountain dusky salamanders (Desmognathus ochrophaeus), slimy salamanders (Plethodon glutinosus), and eastern red-backed salamanders (Plethodon cinereus). Mountain dusky salamander relative abundance was positively associated with canopy cover and there were significantly more individuals within controls than either shelterwood-burn or fenced shelterwood-burn treatments. Conversely, habitat variables associated with slimy salamanders and eastern red-backed salamanders did not differ among treatments. Salamander age-class structure within controls did not differ from shelterwood-burn or fenced shelterwood-burn treatments for any species. Overall, the woodland salamander assemblage remained relatively intact throughout the shelterwoodburn

Rent-seeking and timber rights allocation in Ghana

DEFF Research Database (Denmark)

Carlsen, Kirsten; Hansen, Christian Pilegaard

2014-01-01

This paper describes types, processes and importance of rent-seeking in the allocation of timber rights in Ghana. It is based on an analysis of 30 interviews with large-, medium- and small-scale timber firms, as well as government officials and timber industry organizations in Ghana. The paper...... documents that timber rights allocation is associated with both bureaucratic and political corruption. The latter comes in two forms. First, the findings suggest that well-established relationships exist between politicians and senior bureaucrats on the one side and large-scale timber firms on the other...

Management of young forest stands for integrated production of wood fuel and quality timber. Final report

International Nuclear Information System (INIS)

Lundmark, Tomas; Sahlen, Kenneth; Ulvcrona, Kristina

2005-06-01

The aim of this project has been to develop practical silvicultural measures that integrate the optimization of biomass production in dense young mixed stands with production of quality timber later during the rotation period. The results show that annual biomass production can be trippled by keeping young stands dense and adding fertilizers. At the same time by delaying the time for pre-commercial thinning (or replacing it with a biomass harvest) relative branch size in the lower part of the stem will be reduced. This support the hypothesis that biomass production can be improved if young stands are kept dense up to the height of 8-10 m and as a consequence of delayed thinning timber quality can also be improved. Important background data for technical development has also been provided as well as data needed for economical analyses of different silvicultural systems including the treatment of heterogenous dense stands with mixed species composition

characterisation and grading of two selected timber species grown

African Journals Online (AJOL)

HOD

Structural timber is the timber used in framing and load bearing ... The main challenge in design with timber as structural member is to .... is the classification of timber based on particular ..... Azadirachta indica leaf extract on serum lipid profile.

Early response of ground layer plant communities to wildfire and harvesting disturbance in forested peatland ecosystems in northern Minnesota, USA

Science.gov (United States)

Erika R. Rowe; Anthony W. D' Amato; Brian J. Palik; John C. Almendinger

2017-01-01

A rare, stand-replacing fire in northern Minnesota, USA provided the opportunity to compare the effects of wildfire and timber harvesting in two peatland forest communities, nutrient-poor black spruce (Picea mariana) bogs (BSB) and nutrient-rich tamarack (Larix laricina) swamps (RTS). We found the response between the two...

Knowledge-Based Estimation of Edible Fern Harvesting Sites in Mountainous Communities of Northeastern Japan

Directory of Open Access Journals (Sweden)

Toshiya Matsuura

2013-12-01

Full Text Available Once local expert knowledge regarding the harvesting of various non-timber forest products (NTFPs is lost, it is difficult to recover. We investigated whether the knowledge of expert forest harvesters can be used to determine the habitat distribution and harvesting sites of three popular edible wild ferns, i.e., ostrich fern (Matteuccia struthiopteris, bracken (Pteridium aquilinum, and royal fern (Osmunda japonica, in mountainous communities of western Fukushima, Japan. Using multi-criteria evaluation (MCE based on the analytic hierarchy process (AHP and geographic information system (GIS, we found that harvesters were easily able to recognize differences in the spatial characteristics of the habitat distribution of fern species due to both natural and anthropogenic factors. These factors were described by various GIS layers, such as vegetation and terrain features (e.g., gradient, aspect, and slope position derived from a 20-m digital elevation model (DEM. Harvesting sites were limited by their distance from a roadway, which differed among species. By comparison with the GPS records of actual harvesting sites, we estimated the potential harvesting sites of each fern species with reasonable accuracy, particularly for bracken. Our results show that the knowledge of expert forest harvesters can be quantified using MCE and GIS, which is useful for determining the spatial characteristics of NTFP harvesting and ensuring sustainable management practices.

Timber resource statistics for eastern Washington, 1995.

Science.gov (United States)

Neil McKay; Patricia M. Bassett; Colin D. MacLean

1995-01-01

This report summarizes a 1990-91 timber resource inventory of Washington east of the crest of the Cascade Range. The inventory was conducted on all private and public lands except National Forests. Timber resource statistics from National Forest inventories also are presented. Detailed tables provide estimates of forest area, timber volume, growth, mortality, and...

Socio-ecological costs of Amazon nut and timber production at community household forests in the Bolivian Amazon.

Science.gov (United States)

Soriano, Marlene; Mohren, Frits; Ascarrunz, Nataly; Dressler, Wolfram; Peña-Claros, Marielos

2017-01-01

The Bolivian Amazon holds a complex configuration of people and forested landscapes in which communities hold secure tenure rights over a rich ecosystem offering a range of livelihood income opportunities. A large share of this income is derived from Amazon nut (Bertholletia excelsa). Many communities also have long-standing experience with community timber management plans. However, livelihood needs and desires for better living conditions may continue to place these resources under considerable stress as income needs and opportunities intensify and diversify. We aim to identify the socioeconomic and biophysical factors determining the income from forests, husbandry, off-farm and two keystone forest products (i.e., Amazon nut and timber) in the Bolivian Amazon region. We used structural equation modelling tools to account for the complex inter-relationships between socioeconomic and biophysical factors in predicting each source of income. The potential exists to increase incomes from existing livelihood activities in ways that reduce dependency upon forest resources. For example, changes in off-farm income sources can act to increase or decrease forest incomes. Market accessibility, social, financial, and natural and physical assets determined the amount of income community households could derive from Amazon nut and timber. Factors related to community households' local ecological knowledge, such as the number of non-timber forest products harvested and the number of management practices applied to enhance Amazon nut production, defined the amount of income these households could derive from Amazon nut and timber, respectively. The (inter) relationships found among socioeconomic and biophysical factors over income shed light on ways to improve forest-dependent livelihoods in the Bolivian Amazon. We believe that our analysis could be applicable to other contexts throughout the tropics as well.

Timber floors strengthened with concrete

NARCIS (Netherlands)

Blass, H.J.; Linden, M.L.R. van der; Schlager, M.

1998-01-01

Timber-concrete composite (tcc) beams may be used for the renovation of old timber floors. Although these systems are not new (Pokulka, 1997) and form a simple and practical solution, they are not widely adopted. One of the reasons for this is the Jack of uniform design rules. In this research

Timber-concrete composite floor systems

NARCIS (Netherlands)

Linden, M.L.R. van der; Blass, H.J.

1996-01-01

Timber-concrete composite (tcc) beams may be used for the renovation of old timber floors. Although these systems are a simple and practical solution, they are not widely adopted. One of the reasons for this is the lack of uniform design mies. In this research programme shear tests on four different

Timber harvesting with variable prices, costs and interest rates

International Nuclear Information System (INIS)

Penttinen, M.

2000-01-01

This papers solves the optimal harvesting time problem of a non- industrial private forest (NIPF) owner who typically has a forest management plan and merchantable forest stands. The optimal harvesting time is defined in a volatile market situation. The infinite period problem is also formulated to allow for variable stumpage prices and reforestation costs in a two-period framework, the first of which covers the near future with dynamic price and cost functions and the second the rest of the infinite future with trend price and cost functions. The existence and uniqueness of an optimal policy is demonstrated on the basis of the explicit quasi- concavity of the objective functions. First, the solutions are constructed with prices and costs dependent on stand age only. Both cases in which the same prices and costs hold for all periods and cases in which there are dynamic prices and costs in the first period and trend ones in subsequent periods are considered. Second, the age-dependent functions are multiplied separately by the calendar time dependent exponential terms. Solutions are provided both in the case with the same age-dependent functions and the case with dynamic functions for the first period and trend functions for the subsequent periods. The sensitivity and comparative static analyses are studied with respect to the interest rate, price and cost changes, both analytically and numerically. Optimal rotation solutions are presented with alternative competing volume growth functions. Final results are provided by a gross income growth function. Competing optimisation models are discussed, and alternative volume growth models and a value growth model are compared. The key notion of the research is the sensitivity and comparative static analysis of the optimal rotation solutions with respect to roundwood prices, reforestation costs and interest rates. Different local market parameter and alternative growth data estimates are applied in testing the impact of

Structural Reliability of the Nigerian Grown Abura Timber Bridge ...

African Journals Online (AJOL)

Structural reliability analysis was carried out on the Nigerian grown Abura timber, to ascertain its structural performance as timber bridge beams. Samples of the Nigerian grown Abura timber were bought from timber market, seasoned naturally and their structural/strength properties were determined at a moisture content of ...

Methodology for safety evaluation of existing timber elements

OpenAIRE

Sousa, Hélder S.

2013-01-01

Tese de doutoramento em Engenharia Civil The past decades have seen a renewed interest in timber research related topics. As instance, timber engineering is not only confined to the design of new construction with innovative wood based products, but also an increasing awareness for the preservation of existing timber structures is visible in nowadays society. Therefore, arises the need for a better understanding of timber performance as a construction material aiming at a bette...

Timber frame walls

DEFF Research Database (Denmark)

Hansen, Ernst Jan de Place; Brandt, Erik

2010-01-01

A ventilated cavity is usually considered good practice for removing moisture behind the cladding of timber framed walls. Timber frame walls with no cavity are a logical alternative as they are slimmer and less expensive to produce and besides the risk of a two-sided fire behind the cladding....... It was found that the specific damages made to the vapour barrier as part of the test did not have any provable effect on the moisture content. In general elements with an intact vapour barrier did not show a critical moisture content at the wind barrier after four years of exposure....

Nailed timber beams with I composed section

Directory of Open Access Journals (Sweden)

Jorge Luís Nunes de Góes

2003-01-01

Full Text Available The employment of built-up timber beams, made of commercial dimensions pieces, is becoming increasingly important in timber structures in Brazil, mainly due to the ever-growing scarcity of timber elements in larger sizes. The built-up system has vast application, from beams for residential buildings to girders for small bridges. The objective of this work is the theoretical and experimental study of nailed timber beams with composed cross section I. The design procedure of EUROCODE 5/93 and NBR 7190/97 are shown and evaluated, as well as the theory about the subject matter. The experimental evaluation of the theoretical models was made by means of bending tests in prototypes of built-up timber beams. The obtained results shows that the EUROCODE 5/93 procedure is the most indicated for evaluating effective bending stiffness, normal and shear stresses as well as the load on fasteners.

The Materiality of Novel Timber Architecture

DEFF Research Database (Denmark)

Bejder, Anne Kirkegaard; Kirkegaard, Poul Henning; Wraber, Ida Kristina

2016-01-01

In recent years, wood as a building material has gained renewed focus and, in parallel, new production methods and further refined timber products have been developed. Many of these novel timber building materials have gained significantly enhanced technical qualities, and the question is whether...... this is at the expense of wood’s sensuous and poetic qualities. The proposed method to deal with these questions is to develop a discursive model that can clarify aspects essential for analyzing and discussing the materiality of timber in its contemporary engineered forms. Firstly, this paper presents a theoretical...

Reliability and Robustness Evaluation of Timber Structures

DEFF Research Database (Denmark)

Cizmar, Dean; Sørensen, John Dalsgaard; Kirkegaard, Poul Henning

In the last few decades there have been intensely research concerning reliability of timber structures. This is primarily because there is an increased focus on society on sustainability and environmental aspects. Modern timber as a building material is also being competitive compared to concrete...... and steel. However, reliability models applied to timber were always related to individual components but not the systems. as any real structure is a complex system, system behaviour must be of a particular interest. In the chapter 1 of this document an overview of stochastic models for strength and loads...... (deterministic, probabilistic and risk based approaches) of the robustness are given. Chapter 3 deals more detailed with the robustness of timber structures....

Reinforcement and recovery of timber structures

Directory of Open Access Journals (Sweden)

Antonio Alves Dias

2006-02-01

Full Text Available Preservation of timber structures is a reason for constant concern because their deterioration often involves compromising the historical patrimony, besides endangering the safety of the structure, and consequently, of their users. Many are the examples of churches, residences or other constructions where this manifestation is a fact. The technique of reinforcing structurally endangered pieces with the addition of natural or synthetic fibers, is an alternative that has been researched. In the group of synthetic fibers, fiberglass, carbon and aramid ones are included. On the other hand, it has been frequent in the restoration of old buildings, especially in Europe, the employment of materials that were not available in the past, aiming to achieve structural, acoustic and aesthetic benefits. On an existing timber structure floor, a concrete slab has been carried out, with an appropriate connection system among the parts, constituting the composite timber-concrete structures. This alternative has been considered as extraordinarily viable, because it gathers a series of convenience related with the durability and it presents better mechanic performance than conventional timber structures. In this work, the state-of-the-art of the use of fibers as structural reinforcement and of the timber-concrete composite structures, is presented.

Value of timber continues to increase

International Nuclear Information System (INIS)

Haluza, I.

2007-01-01

The state owned company, Lesy SR (state forests) enjoys great power in the timber industry. It can influence which timber processing companies in Slovakia will be successful and which will not have easy access to the raw material. It manages half of the forests in Slovakia. It is the only seller of timber in this country. Four years ago, the former cabinet appointed banker, Karol Vins, as the director of the company. And he started making changes. He centralized the timber business and thousands of people left the company. The goal was clear -to increase quality and efficiency. The economic performance of the company improved. The company has finally managed to post a profit. Last year, the government changed and so has the director of the company The former banker was replaced by a new head from a forestry research background, Jozef Mindas. He approves of some of the changes introduced by his predecessor and plans to continue implementing them, although there also those he would like to change. The new manager is not concerned regarding the big change from research where he used to work in the past to director of a big company and rejects the allegation that he was nominated by HZDS. I was approached as an expert and I won a tender. I have never been a member of a political party, he stated. He appreciates that his predecessor managed to revitalize the company, which was assisted by the positive effect of out-sourcing. But on the other hand, during transformation forests were not divided up correctly. The division into units did not always take into account the specific requirements of forestry, i.e. some employees in forest units have too much work and some, working in another forest unit, less. We have to make sure that the workload is approximately at the same level everywhere. He is aware of the fact that Lesy SR, which controls two thirds of the timber market, effectively decides which factory will succeed and which one will not. But he adds that Lesy SR do

Timber resource of Missouri's Prairie, 1972.

Science.gov (United States)

Jerold T. Hahn; Alexander Vasilevsky

1975-01-01

The third timber inventory of Missouri's Prairie Forest Survey Unit shows substantial declines in both growing-stock and sawtimber volumes between 1959 and 1972. Commercial forest area declined by one-fifth. Presents highlights and statistics on forest area and timber volume, growth, mortality, ownership, and use in 1972.

Conceptual framework for Non-Timber Forest Products in mangroves of Colombia

International Nuclear Information System (INIS)

Garcia S, Catalina; Polania V, Jaime

2008-01-01

The forests policy of most of tropical countries is directed initially toward the use of Wood resources and, secondarily, for firewood. Nevertheless, tropical forests generate other products that, in some countries, can have a high value, comparable with those of wood, called 'Non Timber Forest Products' (NTFP) or 'Non Wood Forest Products' (NWFP). Unfortunately this label does not enhance the fact that its harvest is an important activity in rural economies. The NTFP have motivated interest by their economic and social contribution in many countries, mainly for rural populations? all along Latin America are utilized, and, particularly in Colombia, it is necessary to regulate clearly and accurately their exploitation. Here we present a conceptual framework for the NTFP's, and describe the potential contribution of mangroves to this market in Colombia

Timber Price Dynamics Following a Natural Catastrophe

OpenAIRE

Jeffrey P. Prestemon; Thomas P. Holmes

2000-01-01

Catastrophic shocks to existing stocks of a renewable resource can cause long-run price shifts. With timber, these long-run price shifts may be accompanied by a short-run price drop due to salvage. Hurricane Hugo damaged 20% of southern pine timber in the South Carolina Coastal Plain in 1989. To estimate the short- and long-run effects of the hurricane on the prices of timber stocks, we estimated an intervention model of the residuals of cointegration of South Carolina sawtimber and pulpwood ...

Modified traditional Japanese timber joint system with retrofitting abilities

NARCIS (Netherlands)

Shiratori, T.; Komatsu, K.; Leijten, A.J.M.

2008-01-01

Embedment is a key feature of timber joints envisioned as the ultimate solution in avoiding the devastating full collapse of timber structures in seismic countries. The Japanese traditional timber post-and-beam structural system utilizes moment-resisting joints based on embedment. Despite the

Harvesting Water from Air: Using Anhydrous Salt with Sunlight

KAUST Repository

Li, Renyuan; Shi, Yusuf; Shi, Le; Alsaedi, Mossab.; Wang, Peng

2018-01-01

Atmospheric water is abundant alternative water resource, equivalent to 6 times of water in all rivers on Earth. This work screens 14 common anhydrous and hydrated salt couples in terms of their physical and chemical stability, water vapor

On several parameters of mechanized timbering for working faces

Energy Technology Data Exchange (ETDEWEB)

Klorik' yan, S Kh

1979-08-01

Opinion is expressed that the two basic parameters characterizing mechanical timbers, the specific force in ton-forces per square meter of the supported roof surface over the working area and the one-meter length of installed timbering, do not permit selection of the optimum type of timber for a roof of the corresponding class. Experience has demonstrated that the most precise parameter is specific strength of the timber in ton-forces per meter and the determined ratio of the strength of all posts in a section to spacing of the section along the longwall. Also an operating width not exceeding 0.4 meter should serve as a criterion for using timbers on unstable hanging walls. (In Russian)

Safety of timber : An analysis of quality control options

NARCIS (Netherlands)

Kovryga, A.; Stapel, P.; Van de Kuilen, J.W.G.

2014-01-01

The quality assurance of timber properties is important for the safety of timber structures. In the current study, the quality control options of timber are analysed under the prism of the different growth regions. Therefore, these options - machine and output control - are simulated in accordance

Markets, Government Policy, and China’s Timber Supply

Science.gov (United States)

Han Zhang; Joseph Buongiorno

2012-01-01

China’s domestic demand and exports of wood products are rising rapidly compared to domestic supply. The determinants of timber supply in China were investigated with panel data from 25 provinces from 1999 to 2009. The results indicated that China’s timber supply had responded to both market forces, reflected by timber prices largely determined by world demand and...

FRP reinforcement of timber structures

OpenAIRE

Schober, Kay-Uwe; Harte, Annette M.; Kliger, Robert; Jockwer, Robert; Xu, Qingfeng; Chen, Jian-Fei

2015-01-01

Timber engineering has advanced over recent decades to offer an alternative to traditional materials and methods. The bonding of fibre reinforced plastics (FRP) with adhesives to timber structures for repair and strengthening has many advantages. However, the lack of established design rules has strongly restrained the use of FRP strengthening in many situations, where these could be a preferable option to most traditional techniques. A significant body of research has been carried out in rec...

Tradeoffs between Three Forest Ecosystem Services across the State of New Hampshire, USA: Timber, Carbon, and Albedo

Science.gov (United States)

Lutz, D. A.; Burakowski, E. A.; Murphy, M. B.; Borsuk, M. E.; Niemiec, R. M.; Howarth, R. B.

2014-12-01

Albedo is an important physical property of the land surface which influences the total amount of incoming solar radiation that is reflected back into space. It is a critical ecosystem service that helps regulate the Earth's energy balance and, in the context of climate mitigation, has been shown to have a strong influence on the overall effectiveness of land management schemes designed to counteract climate change. Previously, we demonstrated that incorporating the physical effects of albedo into an ecological economic forest model of locations in the White Mountain National Forest, in New Hampshire, USA, leads to a substantially shorter optimal rotation period for forest harvest than under a carbon- and timber-only approach. In this study, we investigate similar tradeoffs at 565 sites across the entire state of New Hampshire in a variety of different forest types, latitudes, and elevations. Additionally, we use a regression tree approach to calculate the influence of biogeochemical and physical factors on the optimal rotation period. Our results suggest that in many instances, incorporating albedo may lead to optimal rotation times approaching zero, or, perpetual clear-cut. Overall, the difference between growing season and winter-time albedo for forested and harvested states was the most significant variable influencing the rotation period, followed by timber stumpage price, and biomass growth rate. These results provide an initial understanding of tradeoffs amongst these three ecosystem services and provide guidance for forest managers as to the relative important properties of their forests when these three services are incentivized economically.

36 CFR 223.62 - Timber purchaser road construction credit.

Science.gov (United States)

2010-07-01

... § 223.62 Timber purchaser road construction credit. Appraisal may also establish stumpage value as if... timber is appraised and sold on such basis, purchaser credit for road construction, not to exceed the estimated construction cost of such roads or other developments specified in the timber sale contract, shall...

Timber tracking

DEFF Research Database (Denmark)

Düdder, Boris; Ross, Omry

2017-01-01

Managing and verifying forest products in a value chain is often reliant on easily manipulated document or digital tracking methods - Chain of Custody Systems. We aim to create a new means of tracking timber by developing a tamper proof digital system based on Blockchain technology. Blockchain...

Ranking independent timber investments by alternative investment criteria

Science.gov (United States)

Thomas J. Mills; Gary E. Dixon

1982-01-01

A sample of 231 independent timber investments were ranked by internal rate of return, present net worth per acre and the benefit cost ratio—the last two discounted by 3, 6.4. 7.5. and 10 percent—to determine if the different criteria had a practical influence on timber investment ranking. The samples in this study were drawn from a group of timber investments...

Collapse Analysis of Timber Structures

DEFF Research Database (Denmark)

Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

2008-01-01

of Structures and a probabilistic modelling of the timber material proposed in the Probabilistic Model Code (PMC) of the Joint Committee on Structural Safety (JCSS). Due to the framework in the Danish Code the timber structure has to be evaluated with respect to the following criteria where at least one shall...... to criteria a) and b) the timber frame structure has one column with a reliability index a bit lower than an assumed target level. By removal three columns one by one no significant extensive failure of the entire structure or significant parts of it are obtained. Therefore the structure can be considered......A probabilistic based collapse analysis has been performed for a glulam frame structure supporting the roof over the main court in a Norwegian sports centre. The robustness analysis is based on the framework for robustness analysis introduced in the Danish Code of Practice for the Safety...

Section of mechanized timbering of an installation layer

Energy Technology Data Exchange (ETDEWEB)

Gur' yev, D K; Tomashevskiy, L P; Vorotnyak, M V

1980-07-28

A section of mechanized timbering of an installation layer is suggested which includes roof timber, base with cantilever, hydrostand, safety guard which consists of a lower and upper shield, where the lower shield in the lower part has a roll whose upper part is hinged to the cantilever base, and the upper shield is hinged to the roof timber. Its lower part is connected by a linkage to the cantilever of the base. There is also a correcting device, tie rod and holder with rolled material. In order to guarantee stability of the timbering section during work on thick beds and adaptability of the roof timber to the roofing of the bed, the connection between the cantilever and the lower part of the upper shield is made from a longitudinal slit on the cantilever and slide bar placed in it. It is attached by a pin to the lower part of the upper shield. In this case the tie bar is hinged to the linkage and by means of the slide bar to the roof timber, while the correcting device is made of an extension-type support with level which contacts with the wedge and the tightening element installed on the cantilever of the base.

Tall timber building technologies in The Netherlands

NARCIS (Netherlands)

Jorissen, A.J.M.; Leijten, A.J.M.

2008-01-01

In the last few decades, structural timber for residential buildings has lost popularity because of problems related to floor vibrations, acoustics and fire resistance. In recent years, however, solutions to these problems have been developed and timber-framed housing is becoming increasingly

Linking state-and-transition simulation and timber supply models for forest biomass production scenarios

Science.gov (United States)

Costanza, Jennifer; Abt, Robert C.; McKerrow, Alexa; Collazo, Jaime

2015-01-01

We linked state-and-transition simulation models (STSMs) with an economics-based timber supply model to examine landscape dynamics in North Carolina through 2050 for three scenarios of forest biomass production. Forest biomass could be an important source of renewable energy in the future, but there is currently much uncertainty about how biomass production would impact landscapes. In the southeastern US, if forests become important sources of biomass for bioenergy, we expect increased land-use change and forest management. STSMs are ideal for simulating these landscape changes, but the amounts of change will depend on drivers such as timber prices and demand for forest land, which are best captured with forest economic models. We first developed state-and-transition model pathways in the ST-Sim software platform for 49 vegetation and land-use types that incorporated each expected type of landscape change. Next, for the three biomass production scenarios, the SubRegional Timber Supply Model (SRTS) was used to determine the annual areas of thinning and harvest in five broad forest types, as well as annual areas converted among those forest types, agricultural, and urban lands. The SRTS output was used to define area targets for STSMs in ST-Sim under two scenarios of biomass production and one baseline, business-as-usual scenario. We show that ST-Sim output matched SRTS targets in most cases. Landscape dynamics results indicate that, compared with the baseline scenario, forest biomass production leads to more forest and, specifically, more intensively managed forest on the landscape by 2050. Thus, the STSMs, informed by forest economics models, provide important information about potential landscape effects of bioenergy production.

Linking state-and-transition simulation and timber supply models for forest biomass production scenarios

Directory of Open Access Journals (Sweden)

Jennifer K. Costanza

2015-03-01

Full Text Available We linked state-and-transition simulation models (STSMs with an economics-based timber supply model to examine landscape dynamics in North Carolina through 2050 for three scenarios of forest biomass production. Forest biomass could be an important source of renewable energy in the future, but there is currently much uncertainty about how biomass production would impact landscapes. In the southeastern US, if forests become important sources of biomass for bioenergy, we expect increased land-use change and forest management. STSMs are ideal for simulating these landscape changes, but the amounts of change will depend on drivers such as timber prices and demand for forest land, which are best captured with forest economic models. We first developed state-and-transition model pathways in the ST-Sim software platform for 49 vegetation and land-use types that incorporated each expected type of landscape change. Next, for the three biomass production scenarios, the SubRegional Timber Supply Model (SRTS was used to determine the annual areas of thinning and harvest in five broad forest types, as well as annual areas converted among those forest types, agricultural, and urban lands. The SRTS output was used to define area targets for STSMs in ST-Sim under two scenarios of biomass production and one baseline, business-as-usual scenario. We show that ST-Sim output matched SRTS targets in most cases. Landscape dynamics results indicate that, compared with the baseline scenario, forest biomass production leads to more forest and, specifically, more intensively managed forest on the landscape by 2050. Thus, the STSMs, informed by forest economics models, provide important information about potential landscape effects of bioenergy production.

Probabilistic Modelling of Timber Material Properties

DEFF Research Database (Denmark)

Nielsen, Michael Havbro Faber; Köhler, Jochen; Sørensen, John Dalsgaard

2001-01-01

The probabilistic modeling of timber material characteristics is considered with special emphasis to the modeling of the effect of different quality control and selection procedures used as means for grading of timber in the production line. It is shown how statistical models may be established...... on the basis of the same type of information which is normally collected as a part of the quality control procedures and furthermore, how the efficiency of different control procedures may be compared. The tail behavior of the probability distributions of timber material characteristics play an important role...... such that they may readily be applied in structural reliability analysis and the format appears to be appropriate for codification purposes of quality control and selection for grading procedures...

Selection of Nepalese Timber for Small Wind Turbine Blade Construction

DEFF Research Database (Denmark)

Sinha, R.; Acharya, Parash; Freere, Peter

2010-01-01

, weathering effect on coatings, price, growth and availability of the timber. Mechanical properties such as Young's modulus of elasticity, breaking strength, breaking strain and Brinell's hardness of selected Nepalese timbers are presented. The effects of weathering on timbers without coating...

The Level of Utilization of Secondary Timber Species among Furniture Producers

Directory of Open Access Journals (Sweden)

Charles Antwi-Boasiako

2016-06-01

Full Text Available Background and Purpose: Inadequate supply of wood raw material is one of the major obstacles for the global furniture industry’s growth. Several secondary timbers/Lesser-Utilized-Species (LUS that could substitute the scarce traditional timbers for furniture production exist in tropical forests. However, the industry continuously faces persistent timber shortages. The extent to which manufacturers utilize LUS as alternatives is unclear, which this study sought to ascertain. Materials and Methods: Data were collected from 300 Timber Firms from Ghana primarily through questionnaires using the stratified random sampling technique. Results: Continuous decline and non-availability of preferred traditional timbers and competition from imported furniture were the main challenges confronting the furniture industry. Data obtained indicated that most manufacturers (85% hardly use any LUS; 44% of these mentioned lack of information on their properties and prospective uses and 32% attributed it to non-availability on the domestic timber markets. However, 22% of these producers rely on traditionally ‘well-known’ timbers (e.g. mixed red wood, Guarea cedrata and Tectona grandis owing to their strength properties, 20% due to their strength and durability and 14% because of their strength and aesthetic properties. Many LUS (with prospects for furniture-making available in great quantities in many tropical forests could substitute the over-dependent timbers. However, information on their properties and uses are hardly available to local producers, which affects their popularity among timber suppliers and manufacturers. Conclusion: To improve on the level of utilization of secondary timbers, wood workers must be supplied with comprehensive information about their properties and economic values. This will contribute to reducing pressure on the primary timbers, ensuring consistent supply of timber and keeping the sector operational.

Opinions of Forest Managers, Loggers, and Forest Landowners in North Carolina regarding Biomass Harvesting Guidelines

Directory of Open Access Journals (Sweden)

Diane Fielding

2012-01-01

Full Text Available Woody biomass has been identified as an important renewable energy source capable of offsetting fossil fuel use. The potential environmental impacts associated with using woody biomass for energy have spurred development of biomass harvesting guidelines (BHGs in some states and proposals for BHGs in others. We examined stakeholder opinions about BHGs through 60 semistructured interviews with key participants in the North Carolina, USA, forest business sector—forest managers, loggers, and forest landowners. Respondents generally opposed requirements for new BHGs because guidelines added to best management practices (BMPs. Most respondents believed North Carolina’s current BMPs have been successful and sufficient in protecting forest health; biomass harvesting is only an additional component to harvesting with little or no modification to conventional harvesting operations; and scientific research does not support claims that biomass harvesting negatively impacts soil, water quality, timber productivity, or wildlife habitat. Some respondents recognized possible benefits from the implementation of BHGs, which included reduced site preparation costs and increases in proactive forest management, soil quality, and wildlife habitat. Some scientific literature suggests that biomass harvests may have adverse site impacts that require amelioration. The results suggest BHGs will need to be better justified for practitioners based on the scientific literature or linked to demand from new profitable uses or subsidies to offset stakeholder perceptions that they create unnecessary costs.

Case Studies on Timber Defects of Selected Traditional Houses in Malacca

Directory of Open Access Journals (Sweden)

Nor Haniza Ishak

2007-12-01

Full Text Available The effect of adverse environmental conditions on building materials and the extent of damage caused depends on both the materials used and the environmental conditions. Although timber is a diminishing resource, it is still widely used in today's construction. In Malaysia, timber is one of the main components of many historic buildings. Appropriate maintenance of such buildings requires an understanding of timber defects and its related problems. Timber defects are classified into two major groups: non-biological and biological deteriorations. Non-biological deterioration consists of physical decay, excessive moisture content, dimensional instability and chemical deterioration. These defects are mainly caused by the timber in service being subjected to environmental exposure. The most common and destructive timber biological deteriorations are those due to dry rot, we t rot as well as insect attacks . A study based on seven selected houses was conducted to identify the most common building defects, specifically on timber components amongst traditional Malay houses in Malacca, Malaysia, A building condition survey was carried out to determine the effect of the environment towards timber buildings and their main components. Data collected were based on the investigation and visual observation of the selected case studies. Findings of this research will serve as an indicator towards maintaining the buildings' timber components in good condition in order that the buildings' life span could be extended and primarily to conserve the valuable traditional timber houses in a historical city.

Avast Ye Salty Dogs: Salt damage in the context of coastal residential construction and historical maritime timbers

Science.gov (United States)

Grant T. Kirker; Samuel L. Zelinka; Leandro Passarini

2016-01-01

Salt damage is a frequent problem in wood exposed to seawater and other saline environments. Symptoms of salt damage are often referred to as fuzzy wood and have been historically considered non-structural damage, but a growing number of customer inquiries have prompted a re-evaluation of this phenomenon. This paper details several case studies involving salt damage,...

Durability of timber silencers at Wairakei geothermal steam field

Energy Technology Data Exchange (ETDEWEB)

Hedley, M E

1979-02-01

After early failures of reinforced concrete silencers and because of high costs of concrete-lined steel structures, preliminary tests were undertaken to assess the suitability of timber for silencer construction. Tests indicated that radiata pine treated with pentachlorophenol/oil or untreated red beech had most potential for timber silencer fabrication. One prototype silencer of each material was constructed and both were installed on operational bores in 1965. The red beech silencer had a service life of 4 years. The radiata pine silencer operated for 12/sup 1///sub 2/ years, although replacement had been recommended 1 year before this time expired. The performance of this silencer encouraged the general use of timber for silencer construction and further units were built. Procurement of satisfactory grades of timber has proved difficult and has limited silencer fabrication. Ways of improving timber supply, which require modification of silencer design, are discussed.

Robustness Issues for Design of Innovative Timber Structures

DEFF Research Database (Denmark)

Hald, Frederik; Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

2013-01-01

Robustness of structural systems has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious conse-quences in case of failure. The present paper summaries issues with respect to robustness of timber structures. Two different...... large span timber structures are analyzed and based on these analyses the paper presents guidelines for the future development of innovative timber struc-tures which are robust with respect to design and execution errors, unforeseen degradation and other potential hazards....

Industrialized timber structures.

Science.gov (United States)

1974-01-01

It was recently learned that a number of innovations in structural timber components are available to the construction industry, but that they were largely unknown to bridge designers. The purpose of this study was to develop for the Department a fea...

Modeling the Effects of Knots in Structural Timber

DEFF Research Database (Denmark)

Foley, Christina

The main purpose of the pursued research presented in this thesis is to increase knowledge of the effects of knots in structural timber so that characteristics of weaker timber may be determined and applied to improve current grading techniques. In the process, a three-dimensional fiber paradigm...... are given to Shigo's knot formation theory, and thus predicts two separate patterns of fiber direction within annual growth layers related to live knots. In order to determine the possibility to practically and non destructively predict local material directions in structural timber with the three...... was established, which describes variations of radial growth direction and fiber orientation related to knots in timber. The adaptability of the paradigm allows practically any softwood knot and its effect on surrounding wood material to be modeled with an accuracy that is limited only by input data. The knot...

Study on the ventilation resistance of timbered airways (II)

Energy Technology Data Exchange (ETDEWEB)

Oba, S; Takiguchi, I

1977-01-01

From the results of a model study described in a previous paper (I), (Vol.23, No.4), a timber factor Kr is determined as a specific parameter for type of timber and as a function of spacing ratio d/e where d and e are the spacing and the height of sets respectively. A general formula for the determination of the friction coefficient of timbered airways is also proposed.

System Reliability of Timber Structures with Ductile Behaviour

DEFF Research Database (Denmark)

Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; Čizmar, Dean

2011-01-01

The present paper considers the evaluation of timber structures with the focus on robustness due to connection ductility. The robustness analysis is based on the structural reliability framework applied to a simplified mechanical system. The structural timber system is depicted as a parallel system....... An evaluation method of the ductile behaviour is introduced. For different ductile behaviours, the system reliability is estimated based on Monte Carlo simulation. A correlation between the strength of the structural elements is introduced. The results indicate that the reliability of a structural timber system...

Feasibility Investigation into Strengthening of Timber Bridge Stringers

Science.gov (United States)

2007-05-01

12 Studies on timber members recycled from old timber structures...55 Figure 63. The load cell-hydraulic ram setup with spreader beam.....................................................56 Figure 64. The MTS...actuator and spreader beam................................................................................56 Figure 65. Effectiveness of a repair method

Timber price dynamics following a natural catastrophe

Science.gov (United States)

Jeffrey P. Prestemon; Thomas P. Holmes

2000-01-01

Catastrophic shocks to existing stocks of a renewable resource can cause long-run price shifts. With timber, these long-run price shifts may be accompanied by a short-run price drop due to salvage. Hurricane Hugo damaged 20 percent of southern pine timber in the South Carolina Coastal Plain in 1989. To estimate the...

Protection of timber constructions by using electro osmotic pulsing technology (PLEOT)

OpenAIRE

Treu, A.; Larnoy, E.; Ribeiro Nunes, L. M.; Duarte, S.; Halvorsen, H.

2011-01-01

Timber constructions are often built in combination with other materials such as concrete. These materials can influence the timber construction. Moist concrete can e.g. lead to development of molds which creates an unhealthy living area for people. Furthermore, moisture in wood buildings can negatively affect the wood material, which can lead to negative biological activity in timber and possible reduction of strength properties of timber constructions. The present paper introduces ...

Integration of membrane distillation into traditional salt farming method: Process development and modelling

Science.gov (United States)

Hizam, S.; Bilad, M. R.; Putra, Z. A.

2017-10-01

Farmers still practice the traditional salt farming in many regions, particularly in Indonesia. This archaic method not only produces low yield and poor salt quality, it is also laborious. Furthermore, the farming locations typically have poor access to fresh water and are far away from electricity grid, which restrict upgrade to a more advanced technology for salt production. This paper proposes a new concept of salt harvesting method that improves the salt yield and at the same time facilitates recovery of fresh water from seawater. The new concept integrates solar powered membrane distillation (MD) and photovoltaic cells to drive the pumping. We performed basic solar still experiments to quantify the heat flux received by a pond. The data were used as insight for designing the proposed concept, particularly on operational strategy and the most effective way to integrate MD. After the conceptual design had been developed, we formulated mass and energy balance to estimate the performance of the proposed concept. Based on our data and design, it is expected that the system would improve the yield and quality of the salt production, maximizing fresh water harvesting, and eventually provides economical gain for salt farmers hence improving their quality of life. The key performance can only be measured via experiment using gain output ratio as performance indicator, which will be done in a future study.

Economic implications of manufacturing sawed ties and timbers

Science.gov (United States)

Lawrence D. Garrett; Lawrence D. Garrett

1969-01-01

The purpose of this paper is to discuss those factors that affect the profitability of manufacturing timbers and show that the combined manufacture of both lumber and timbers will provide a greater daily income than the manufacture of lumber alone.

Effect of timber supplies on the efficiency of coal mining

Energy Technology Data Exchange (ETDEWEB)

Kulish, S A; Ponikarov, V D

1977-01-01

An analysis is made of the system of supplying coal mining production associations with timber materials. The potential for greater efficiency in the use and processing of timber is indicated. The possibility of using methods of mathematical modelling and forecasting to improve the efficiency of supplying timber to coal associations is demonstrated. 1 table.

Assessment of soil erosion sensitivity and post-timber-harvesting erosion response in a mountain environment of Central Italy

Science.gov (United States)

Borrelli, Pasquale; Schütt, Brigitta

2014-01-01

This study aimed to assess the effects of forest management on the occurrence of accelerated soil erosion by water. The study site is located in a mountainous area of the Italian Central Apennines. Here, forest harvesting is a widespread forestry activity and is mainly performed on the moderate to steep slopes of the highlands. Through modeling operations based on data on soil properties and direct monitoring of changes in the post-forest-harvesting soil surface level at the hillslope scale, we show that the observed site became prone to soil erosion after human intervention. Indeed, the measured mean soil erosion rate of 49 t ha- 1 yr- 1 for the harvested watershed is about 21 times higher than the rate measured in its neighboring undisturbed forested watershed (2.3 t ha- 1 yr- 1). The erosive response is greatly aggravated by exposing the just-harvested forest, with very limited herbaceous plant cover, to the aggressive attack of the heaviest annual rainfall without adopting any conservation practices. The erosivity of the storms during the first four months of field measurements was 1571 MJ mm h- 1 ha- 1 in total (i.e., from September to December 2008). At the end of the experiment (16 months), 18.8%, 26.1% and 55.1% of the erosion monitoring sites in the harvested watershed recorded variations equal or greater than 0-5, 5-10 and > 10 mm, respectively. This study also provides a quantification of Italian forestland surfaces with the same pedo-lithological characteristics exploited for wood supply. Within a period of ten years (2002-2011), about 9891 ha of coppice forest changes were identified and their potential soil erosion rates modeled.

NUTRIENT BALANCE IN WATER HARVESTING SOILS

Directory of Open Access Journals (Sweden)

Díaz, F

2005-05-01

Full Text Available Dryland farming on Fuerteventura and Lanzarote (Canary Islands, Spain, which has an annual rainfall of less than 150 mm/year, has been based traditionally on water harvesting techniques (known locally as “gavias”. Periods of high productivity alternate with those of very low yield. The systems are sustainable in that they reduce erosive processes, contribute to soil and soil-water conservation and are largely responsible for maintaining the soil’s farming potential. In this paper we present the chemical fertility status and nutrient balance of soils in five “gavia” systems. The results are compared with those obtained in adjacent soils where this water harvesting technique is not used. The main crops are wheat, barley, maize, lentils and chick-peas. Since neither organic nor inorganic fertilisers are used, nutrients are derived mainly from sediments carried by runoff water. Nutrients are lost mainly through crop harvesting and harvest residues. The soils where water harvesting is used have lower salt and sodium in the exchange complex, are higher in carbon, nitrogen, copper and zinc and have similar phosphorous and potassium content. It is concluded that the systems improve the soil’s natural fertility and also that natural renovation of nutrients occurs thanks to the surface deposits of sediments, which mix with the arable layer. The system helps ensure adequate fertility levels, habitual in arid regions, thus allowing dryland farming to be carried out.

Reconciling Biodiversity Conservation and Timber Production in Mixed Uneven-Aged Mountain Forests: Identification of Ecological Intensification Pathways.

Science.gov (United States)

Lafond, Valentine; Cordonnier, Thomas; Courbaud, Benoît

2015-11-01

Mixed uneven-aged forests are considered favorable to the provision of multiple ecosystem services and to the conciliation of timber production and biodiversity conservation. However, some forest managers now plan to increase the intensity of thinning and harvesting operations in these forests. Retention measures or gap creation are considered to compensate potential negative impacts on biodiversity. Our objectives were to assess the effect of these management practices on timber production and biodiversity conservation and identify potential compensating effects between these practices, using the concept of ecological intensification as a framework. We performed a simulation study coupling Samsara2, a simulation model designed for spruce-fir uneven-aged mountain forests, an uneven-aged silviculture algorithm, and biodiversity models. We analyzed the effect of parameters related to uneven-aged management practices on timber production, biodiversity, and sustainability indicators. Our study confirmed that the indicators responded differently to management practices, leading to trade-offs situations. Increasing management intensity had negative impacts on several biodiversity indicators, which could be partly compensated by the positive effect of retention measures targeting large trees, non-dominant species, and deadwood. The impact of gap creation was more mitigated, with a positive effect on the diversity of tree sizes and deadwood but a negative impact on the spruce-fir mixing balance and on the diversity of the understory layer. Through the analysis of compensating effects, we finally revealed the existence of possible ecological intensification pathways, i.e., the possibility to increase management intensity while maintaining biodiversity through the promotion of nature-based management principles (gap creation and retention measures).

T-H-A-T-S: timber-harvesting-and-transport-simulator: with subroutines for Appalachian logging

Science.gov (United States)

A. Jeff Martin

1975-01-01

A computer program for simulating harvesting operations is presented. Written in FORTRAN IV, the program contains subroutines that were developed for Appalachian logging conditions. However, with appropriate modifications, the simulator would be applicable for most logging operations and locations. The details of model development and its methodology are presented,...

RILEM International Symposium on Materials and Joints in Timber Structures

CERN Document Server

Reinhardt, H-W; Garrecht, Harald

2014-01-01

This book contains the contributions from the RILEM International Symposium on Materials and Joints in Timber Structures that was held in Stuttgart, Germany from October 8 to 10, 2013. It covers recent developments in the materials and the joints used in modern timber structures. Regarding basic wooden materials, the contributions highlight the widened spectrum of products comprising cross-laminated timber, glulam and LVL from hardwoods and block glued elements. Timber concrete compounds, cement bonded wood composites and innovative light-weight constructions represent increasingly employed alternatives for floors, bridges and facades. With regard to jointing technologies, considerable advances in both mechanical connections and glued joints are presented. Self-tapping screws have created unprecedented options for reliable, strong as well as ductile joints and reinforcement technologies. Regarding adhesives, which constitute the basis of the jointing/laminating technology of modern timber products, extended o...

Reliability-Based Calibration of Load Duration Factors for Timber Structures

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard; Svensson, Staffan; Stang, Birgitte Friis Dela

2005-01-01

John Dalsgaard Sørensen, Staffan Svensson, Birgitte Dela Stang : Reliability-Based Calibration of Load Duration Factors for Timber Structures     Abstract :   The load bearing capacity of timber structures decrease with time depending on the type of load and timber. Based on representative limit...... states and stochastic models for timber structures, load duration factors are calibrated using probabilistic methods. Load duration e.ects are estimated on basis of simulation of realizations of wind, snow and imposed loads in accordance with the load models in the Danish structural codes. Three damage...... accumulation models are considered, namely Gerhards model, Barrett and Foschi _ s model and Foschi and Yao _ s model. The parameters in these models are .tted by the Maximum Likelihood Method using data relevant for Danish structural timber and the statistical uncertainty is quanti .ed. The reliability...

Long-Term Impacts of China’s New Commercial Harvest Exclusion Policy on Ecosystem Services and Biodiversity in the Temperate Forests of Northeast China

Directory of Open Access Journals (Sweden)

Kai Liu

2018-04-01

Full Text Available Temperate forests in Northeast China have been severely exploited by timber harvesting in the last century. To reverse this trend, China implemented the Classified Forest Management policy in the Natural Forest Conservation Program in 1998 to protect forests from excessive harvesting. However, the policy was unable to meet the 2020 commitment of increasing growing stock (set in the Kyoto Protocol because of high-intensity harvesting. Accordingly, China banned all commercial harvesting in Northeast China in 2014. In this study, we investigated the long-term impacts of the no commercial harvest (NCH policy on ecosystem services and biodiversity using a forest landscape model, LANDIS PRO 7.0, in the temperate forests of the Small Khingan Mountains, Northeast China. We designed three management scenarios: The H scenario (the Classified Forest Management policy used in the past, the NCH scenario (the current Commercial Harvest Exclusion policy, and the LT scenario (mitigation management, i.e., light thinning. We compared total aboveground forest biomass, biomass by tree species, abundance of old-growth forests, and diversity of tree species and age class in three scenarios from 2010 to 2100. We found that compared with the H scenario, the NCH scenario increased aboveground forest biomass, abundance of old-growth forests, and biomass of most timber species over time; however, it decreased the biomass of rare and protected tree species and biodiversity. We found that the LT scenario increased the biomass of rare and protected tree species and biodiversity in comparison with the NCH scenario, while it maintained aboveground forest biomass and abundance of old-growth forests at a high level (slightly less than the NCH scenario. We concluded there was trade-off between carbon storage and biodiversity. We also concluded that light thinning treatment was able to regulate the trade-off and alleviate the negative effects associated with the NCH policy. Our

Tensile properties of machine strength graded timber for glued laminated timber

DEFF Research Database (Denmark)

Boström, Lars; Hoffmeyer, Preben; Solli, Kjell-Helge

1999-01-01

Special setting values based on tensile properties of Norway spruce are established for four different strength grading machines. The machines included are Computermatic, Cook-Bolinder, Ersson and Dynagrade.The study shows that the yield of timber to be used in tension, such as laminations...

Estimating Soil Displacement from Timber Extraction Trails in Steep Terrain: Application of an Unmanned Aircraft for 3D Modelling

Directory of Open Access Journals (Sweden)

Marek Pierzchała

2014-06-01

Full Text Available Skid trails constructed for timber extraction in steep terrain constitute a serious environmental concern if not well planned, executed and ameliorated. Carrying out post-harvest surveys in monitoring constructed trails in such terrain is an onerous task for forest administrators, as hundreds of meters need to be surveyed per site, and the quantification of parameters and volumes is largely based on assumptions of trail symmetry and terrain uniformity. In this study, aerial imagery captured from a multi-rotor Unmanned Aerial Vehicle was used in generating a detailed post-harvest terrain model which included all skid trails. This was then compared with an Airborne Laser Scanning derived pre-harvest terrain model and the dimensions, slopes and cut-and-fill volumes associated with the skid trails were determined. The overall skid trail length was 954 m, or 381 m·ha−1 with segments varying from 40–60 m, inclinations from 3.9% to 9.6%, and cut volumes, from 1.7 to 3.7 m3 per running meter. The methods used in this work can be used in rapidly assessing the extent of disturbance and erosion risk on a wide range of sites. The multi-rotor Unmanned Aerial Vehicle (UAV was found to be highly suited to the task, given the relatively small size of harvested stands, their shape and their location in the mountainous terrain.

CONTROL PROCEDURES OF VOLUME OF ESTIMATED AND HARVESTED WOOD IN A PLANTATION OF Pinus spp. IN PARANÁ STATE

Directory of Open Access Journals (Sweden)

Silvane Vatraz

2014-06-01

Full Text Available http://dx.doi.org/10.5902/1980509814585The objective of this research was to improve the operating procedures of control of the volume of timber estimated by the forest inventory and the effectively harvested volume in order to reduce inconsistencies in the forest planning practiced in a forestry plantation of Pinus spp. in Paraná state. Accordingly, we used the tools of quality: storming and PDCA Cycle through an exploratory research project to study together. The study showed an inconsistency initial volume – 24,73% of the volume estimated by the inventory and the effectively harvested wood. This inconsistency was composed of operational failures in the activities of Forest Inventory (+13,84%, Forest Harvesting (+15,62% and Expedition Wood (-3,08%. The application of quality tools helped in the identification of inconsistency, as well as the revelation of operational failures, which suggested some routine monitoring and checking each of the activities involved in managing operational forestry.  

Biophysical and biochemical constraints imposed by salt stress:Learning from halophyte

Directory of Open Access Journals (Sweden)

Bernardo eDuarte

2014-12-01

Full Text Available Soil salinization is one of the most important factors impacting plant productivity. About 3.6 billion of the world’s 5.2 billion ha of agricultural dryland have already suffered erosion, degradation and salinization. Halophytes typically are considered as plants able to complete their life cycle in environments where the salt concentration is 200 mM NaCl or higher. Different strategies are known to overcome salt stress, as adaptation mechanisms from this type of plants. Salinity adjustment is a complex phenomenon characterized by both biochemical and biophysical adaptations. As photosynthesis is a prerequisite for biomass production, halophytes adapted their electronic transduction pathways and the entire energetic metabolism to overcome the salt excess. The maintenance of ionic homeostasis is in the basis of all cellular stress in particular in terms of redox potential and energy transduction. In the present work the biophysical mechanisms underlying energy capture and transduction in halophytes are discussed alongside with their relation to biochemical mechanisms, integrating data from photosystem light harvesting complexes, electronic transport chains to the quinone pools, carbon harvesting and energy dissipation metabolism.

Understanding salt tolerance mechanisms in wheat genotypes by exploring antioxidant enzymes

DEFF Research Database (Denmark)

Amjad, M.; Akhtar, J.; Haq, M.A.

2014-01-01

The activities of antioxidant enzymes were analyzed in six wheat genotypes under different concentrations of NaCl (0, 100 and 200 mM). Plants were harvested after either 15 or 30 days of salt stress. The most salt tolerant genotype (SARC-1) maintained lower Na+ and higher relative growth rate (RGR......), shoot fresh weight (SFW), shoot-root ratio, and K+:Na+ ratio, compared to the most salt sensitive genotypes (S-9189 and S-9476). Superoxide dismutase (SOD) and catalase (CAT) increased significantly in SARC-1 and SARC-2 with increasing salt stress, while there was no difference in S-9189 and S- 9476....... Additionally, glutathione reductase (GR) activity was decreased in salt sensitive (S-9189 and S-9476) than salt tolerant (SARC-1) genotypes. Under salt stress conditions a negative relationship between SOD and leaf Na+, and a positive between SOD and shoot fresh weight (SFW), were observed. The higher...

Finite-Element Modeling of Timber Joints with Punched Metal Plate Fasteners

DEFF Research Database (Denmark)

Ellegaard, Peter

2006-01-01

The focus of this paper is to describe the idea and the theory behind a finite-element model developed for analysis of timber trusses with punched metal plate fasteners (nail plates). The finite-element model includes the semirigid and nonlinear behavior of the joints (nonlinear nail and plate...... elements) and contact between timber beams, if any (bilinear contact elements). The timber beams have linear-elastic properties. The section forces needed for design of the joints are given directly by the finite-element model, since special elements are used to model the nail groups and the nail plate...... the behavior of the joints very well at lower load levels. At higher load levels the stiffness is overestimated due to development of cracks in the timber and the linear-elastic timber properties in the finite-element model....

Influence of steaming on drying quality and colour of beech timber

Directory of Open Access Journals (Sweden)

Milić Goran

2015-01-01

Full Text Available This paper presents the results of an analysis of influence of the “light” steaming process on conventional drying and colour of beech timber. A stack consisting of steamed and unsteamed boards was dried. Moisture content and moisture content profiles were recorded, and at the end of drying final moisture content, moisture content difference across thickness, case-hardening and colour were determinated. No statistically significant difference between steamed and unsteamed timber was established in any of the examined parameters (MC, ΔMC, gap. The results indicate that equal (or even better drying quality can be expected with steamed beech timber than with unsteamed timber, given the same drying schedule. Dry steamed timber was darker and more reddish than the unsteamed one. An imprecision of measurement by probes in the kiln was noticed in measuring steamed and unsteamed beech timber having a moisture content of between 7% and 15%, and a solution for overcoming this problem was given. [Projekat Ministarstva nauke Republike Srbije, br. TR 31041

Robustness Analysis of Timber Truss Structure

DEFF Research Database (Denmark)

Rajčić, Vlatka; Čizmar, Dean; Kirkegaard, Poul Henning

2010-01-01

The present paper discusses robustness of structures in general and the robustness requirements given in the codes. Robustness of timber structures is also an issues as this is closely related to Working group 3 (Robustness of systems) of the COST E55 project. Finally, an example of a robustness...... evaluation of a widespan timber truss structure is presented. This structure was built few years ago near Zagreb and has a span of 45m. Reliability analysis of the main members and the system is conducted and based on this a robustness analysis is preformed....

Growing Timber Structures

DEFF Research Database (Denmark)

Tamke, Martin; Evers, Henrik Leander; Stasiuk, David

2013-01-01

The contemporary design of timber structures has to answer questions concerning structural stability, production impact and energy implications in ever earlier stages. The interrelation of these levels creates a complexity that is difficult to resolve through contemporary linear parametric...... to integrate the behaviour of networked systems into structures made from wooden material....

Architectural and structural qualities in timber joints

DEFF Research Database (Denmark)

Christensen, Jesper Thøger; Christensen, Mogens Fiil; Damkilde, Lars

2016-01-01

Design of joints in timber structures is crucial to reach both elegant and structural efficient designs. Design of joints should therefore be an integral part of the conceptual design phase. Traditionally this is not the case, and joints are often solely designed and analysed in the engineering...... but also increase timbers competitiveness in the building industry. The paper is part of an ongoing research project aiming at providing tools for an integrated design process for timber structures. The focus of the paper is to identify how structure and its joints contributes to architecture and vice...... design phase. The result is joints that function structurally but do not add value to the design, and may even compromise the architectural ideas. With an approach, integrating both structural and architectural design from the beginning, one should not only gain better structures and architecture...

User’s guide to SNAP for ArcGIS® :ArcGIS interface for scheduling and network analysis program

Science.gov (United States)

Woodam Chung; Dennis Dykstra; Fred Bower; Stephen O’Brien; Richard Abt; John. and Sessions

2012-01-01

This document introduces a computer software named SNAP for ArcGIS® , which has been developed to streamline scheduling and transportation planning for timber harvest areas. Using modern optimization techniques, it can be used to spatially schedule timber harvest with consideration of harvesting costs, multiple products, alternative...

Comparative durability of timber bridges in the USA

Science.gov (United States)

James P. Wacker; Brian K. Brashaw

2017-01-01

As engineers begin to utilize life-cycle-cost design approaches for timber bridges, there is a necessity for more reliable data about their durability and expected service life. This paper summarizes a comprehensive effort to assess the current condition of more than one hundred timber highway bridge superstructures throughout the United States. This national study was...

Whole tree transportation system for timber processing depots

Science.gov (United States)

John Lancaster; Tom Gallagher; Tim  McDonald; Dana Mitchell

2016-01-01

The growing demand for alternative energy has led those who are interested in producing sustainable energy from renewable timber to devise new concepts to satisfy those demands. The concept of timber processing depots, where whole stem trees will be delivered for future processing into wood products and high quality energy fuel, has led to the re-evaluation of our...

Wood harvesting as chunkwood chips and multi-stage chipping; Puun korjuu palahakkeena ja monivaiheinen lastuaminen

Energy Technology Data Exchange (ETDEWEB)

Kaipainen, H; Seppaenen, V

1997-12-31

The task for the year 1995 was to define the preliminary results of the previous years, to measure the productivity of a harvester, designed for production of chunkwood, and the properties of the chunks. The costs of the PALAPUU method from the felling site to pulpwood chips were to be examined on this basis. Because the prototype of the harvester was not yet available for field tests, the costs were partially calculated on the basis of previous measurements, completed by productivity data obtained from the time-consumption measurements of a multi-tree harvester, applied with minor alteration for this purpose. According to the calculations the PALAPUU method cannot compete with partial-tree or shortwood methods. The profitability of the method could be improved by adding the transportation density and the productivity of the harvester. It is also possible to procure timber to the mill as partial-trees and to chunk it while feeding it into the drum. Chipping tests were made using the steel-frame-chipper owned by VTT Construction Technology. The blade construction of the chipper was changed so, that it was possible to adjust the cutting thickness of the chips to 4 mm, while in the previous mill-tests it had been 6 mm. The chips were used for cooking tests in the Department of Chemistry of the University of Jyvaeskylae. The results showed that the thinner chips were cooked further under the same cooking conditions. By using the chunkwood method it is possible to harvest 10-70 more biomass for the mills, than it is possible in the pulpwood harvesting

Wood harvesting as chunkwood chips and multi-stage chipping; Puun korjuu palahakkeena ja monivaiheinen lastuaminen

Energy Technology Data Exchange (ETDEWEB)

Kaipainen, H.; Seppaenen, V.

1996-12-31

The task for the year 1995 was to define the preliminary results of the previous years, to measure the productivity of a harvester, designed for production of chunkwood, and the properties of the chunks. The costs of the PALAPUU method from the felling site to pulpwood chips were to be examined on this basis. Because the prototype of the harvester was not yet available for field tests, the costs were partially calculated on the basis of previous measurements, completed by productivity data obtained from the time-consumption measurements of a multi-tree harvester, applied with minor alteration for this purpose. According to the calculations the PALAPUU method cannot compete with partial-tree or shortwood methods. The profitability of the method could be improved by adding the transportation density and the productivity of the harvester. It is also possible to procure timber to the mill as partial-trees and to chunk it while feeding it into the drum. Chipping tests were made using the steel-frame-chipper owned by VTT Construction Technology. The blade construction of the chipper was changed so, that it was possible to adjust the cutting thickness of the chips to 4 mm, while in the previous mill-tests it had been 6 mm. The chips were used for cooking tests in the Department of Chemistry of the University of Jyvaeskylae. The results showed that the thinner chips were cooked further under the same cooking conditions. By using the chunkwood method it is possible to harvest 10-70 more biomass for the mills, than it is possible in the pulpwood harvesting

Robustness Analysis of a Timber Structure with Ductile Behaviour in Compression

DEFF Research Database (Denmark)

Čizmar, Dean; Sørensen, John Dalsgaard; Kirkegaard, Poul Henning

2011-01-01

This paper presents a probabilistic approach for structural robustness assessment for a timber structure built a few years ago. The robustness analysis is based on a structural reliability based framework for robustness assessment. The complex timber structure with a large number of failure modes...... material ductility of timber is taken into account. The robustness is expressed and evaluated by a robustness index....

Historic timber skeleton structures and the local seismic culture

Science.gov (United States)

Bostenaru, M.

2009-04-01

This presentation deals with the employment of timber skeleton structure and the local seismic culture. After the 1755 earthquake in the reconstruction of Lisbon a type of building with timber skeleton and masonry infill called "gaiola pombalina" was promoted, since this was designed to better resists earthquakes. "Gaiola" means cage, and it was also named after the Marques de Pombal who introduced it in the reconstruction following the earthquake. The „gaiola pombalina" presents a timber skeleton with Saint Andrew crosses in the interior walls with masonry infill and thick masonry load bearing walls loosing in thickness to the upper floors in the exterior walls. The masonry can fall out during earthquakes but the building remains staying given the interior timber skeleton. The type of buildings with timber structure and (masonry) infill behaved well in earthquakes in various parts of the earth, like Nepal (the dhaji dewary type), Pakistan, Turkey (the himiş type after the 1999 earthquake) [both latter types were researched by Langenbach, www.conservationtech.com and www.traditional-is-modern.net] and also in Germany after the 1356 earthquake (the Southern German subtype of Fachwerk). Also in Italy a subtype called "casa baraccata" was promoted in a construction code to a similar time (following the 1783 earthquake in Southern Italy, see Tobriner 1983) as that of the "gaiola pombalina", the time of the Baroque, when town planning acquired another status. Unlike at the "gaiola pombalina" the "casa baraccata" the timber skeleton is at the exterior walls. For this reason this type of buildings is considered to be an expression of the local seismic culture. However, this type of buildings is common also for areas where seismic risk is not an issue, like half-timbered in England and the northern subtype of Fachwerk in Northern Germany, and in some high seismic risk regions with mountains and timber resources like Romania is not spread. Given these premises the author

On calculating the pressure on cylindrical timbers of vertical shafts in clayey soils

Energy Technology Data Exchange (ETDEWEB)

Mizyumskii, V A

1979-11-01

In order to calculate the pressure built up on timbers which have been constructed to hold back freely moving soil in a clay environment, a formula is recommended which characterizes the state of clayey soil. The formula incorporates the parameters for volume information, momentary and long displacement modulus, decay factor of deformations of the after effect, viscosity factor in the starting zone of reforming. Because the timber creates a reaction pressure on the contour of the working, the radial travel of the timber is calculated and then the pressure on the timber. Correlation of the calculated pressure with the results of measurements in workings showed that the pressure of clayey soil on the timber is the result of viscous flow deformations. Disregarding these deformations, the pressures on the shaft timbering in the Yuzhno-Belozerskii deposit were calculated at 0.004 and 0.006 tons/m/sup 2/ respectively at a depth of 90 and 142 meters. After reworking the soil and setting up timbering the pressure was calculated at 2/3 of that of the highest measurements. The formula suggested is suitable for determining pressure on timbers having a large creep. (12 refs.) (In Russian)

Wisconsin timber industry--an assessment of timber product output and use, 1988.

Science.gov (United States)

W. Brad Smith; James W. Whipple

1990-01-01

Discusses recent Wisconsin forest industry trends; production and receipts of pulpwood, saw logs, and veneer logs; and production of other timber products in 1988. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of this mill residue.

WELFARE IMPLICATIONS OF TIMBERLAND OWNERSHIP CHANGES IN THE U.S. TIMBER MARKETS

Directory of Open Access Journals (Sweden)

Mohammad Mahfuzur Rahman

2016-07-01

Full Text Available In the last two decades, many forest product firms in the U.S. either divested their timberlands to timber investment management organizations (TIMOs and conservation organizations or converted their corporate structures from C corporations to real estate investment trusts (REITs. All landowners sold smaller timberland tracts for nonforestry uses. Reduced timber supplies from conservation organizations and timberland loss to other nonforestry uses have consequences on producer and consumer surpluses in the U.S. timber markets. Equilibrium displacement model has been employed to evaluate the welfare changes in U.S. timber markets attributed to timberland ownership changes. Net reduction of timber supply contributed to the reduction of social surplus by $43 million in 2006. Compared to the $33 billion plus U.S. timber markets, this welfare reduction was small. Overall, this article explains the shifts of economic surpluses among producers and net surplus reduction for the society attributed to timberland ownership changes in the United States.

Lateral testing of glued laminated timber tudor arch

Science.gov (United States)

Douglas R. Rammer; Philip Line

2016-01-01

Glued laminated timber Tudor arches have been in wide use in the United States since the 1930s, but detailed knowledge related to seismic design in modern U.S. building codes is lacking. FEMA P-695 (P-695) is a methodology to determine seismic performance factors for a seismic force resisting system. A limited P-695 study for glued laminated timber arch structures...

Local, Short-term Effects of Forest Harvesting on Breeding Waterfowl and Common Loon in Forest-Dominated Landscapes of Quebec

Directory of Open Access Journals (Sweden)

Louis-Vincent Lemelin

2007-12-01

Full Text Available Northern forests are major breeding habitats for several waterfowl and other waterbird species. In Quebec, as in many other areas within the boreal region, clear-cut logging is an important human activity, and it is likely to affect ground- and cavity-nesting species differently. We used Black Duck Joint Venture/Canadian Wildlife Service aerial survey data, together with Quebec digital forest maps, to investigate local, i.e., within 2 km of clear-cut areas, short-term (~ 4 yr effects of forest harvesting on waterfowl and Common Loon. Our predictions were that clear-cut logging would not affect ground nesters, but would negatively affect pair settling patterns in cavity nesters through nesting habitat disturbance. Our study spanned a 540,000-km² territory in which we considered over 30,000 ha of clear-cut areas that were dispersed into 42 different locations. We controlled for interannual variation in population size by comparing the pre- and post-harvest percentages of potentially hospitable nesting cover disturbed by timber harvesting within a 1-km radius of indicated breeding pairs. Our results suggest that timber harvesting positively influenced local populations of Canada Goose and American Green-winged Teal. No other ground-nesting species showed a significant response. For the cavity-nesting guild and species, we detected no local, short-term effect of clear-cutting. This result was unexpected because many previous studies of nest-box provisioning reported increased breeding pair densities, indicating that availability of natural holes may limit cavity-nesting duck populations. Moreover, because cavity-nesting ducks are considered among the most vulnerable bird species to forest management, our results are consistent with the hypothesis that boreal bird populations exhibit some resilience to disturbance. This conclusion follows from a study in landscapes where forests were mostly first-growth. It is not evident that it will remain valid

Infill Panels and the tube connection in timber frames

NARCIS (Netherlands)

Leijten, A.J.M.; Jorissen, A.J.M.; Hoenderkamp, J.C.D.

2012-01-01

In recent years timber infill panels have been proposed for multi-story column-beam frame structures with the aim to substitute the stabilizing function of column-beam moment connections. The preliminary study reported in this paper considers a column-beam timber frame where stability is assured by

Lateral Stiffness of Timber Frames with CLT Infill Panels

NARCIS (Netherlands)

Leijten, A.J.M.; Jorissen, A.J.M.; Hoenderkamp, J.C.D.; Haddad, Y.M.

2011-01-01

In recent years timber infill panels have been proposed for multi-story column-beam frame structures with the aim to substitute the stabilizing function of column-beam moment connections. The preliminary study reported in this paper considers a column-beam timber frame where stability is assured by

Multi-Scalar Modelling for Free-form Timber Structures

DEFF Research Database (Denmark)

Poinet, Paul; Nicholas, Paul; Tamke, Martin

2016-01-01

.The research explores the design probe of free-form structures composed of glue-laminated timber beams and looks at the different types of data that need to be shared among each discipline and across multiple scales from which different levels of resolution can be defined. A particular focus lies...... in the segmentation strategy of glue-laminated timber structures that depend on structural requirements and the different types of constraints related to fabrication, transportation and assembly. Where current working practices decouple segmentation processes within a discrete digital workflow, this research aims...... and techniques as a means to work within a continuous design environment in which an abstract network of timber beams is iteratively updated through geometrical and structural optimizations at different levels of resolution....

Sea salts as a potential source of food spoilage fungi.

Science.gov (United States)

Biango-Daniels, Megan N; Hodge, Kathie T

2018-02-01

Production of sea salt begins with evaporation of sea water in shallow pools called salterns, and ends with the harvest and packing of salts. This process provides many opportunities for fungal contamination. This study aimed to determine whether finished salts contain viable fungi that have the potential to cause spoilage when sea salt is used as a food ingredient by isolating fungi on a medium that simulated salted food with a lowered water activity (0.95 a w ). The viable filamentous fungi from seven commercial salts were quantified and identified by DNA sequencing, and the fungal communities in different salts were compared. Every sea salt tested contained viable fungi, in concentrations ranging from 0.07 to 1.71 colony-forming units per gram of salt. In total, 85 fungi were isolated representing seven genera. One or more species of the most abundant genera, Aspergillus, Cladosporium, and Penicillium was found in every salt. Many species found in this study have been previously isolated from low water activity environments, including salterns and foods. We conclude that sea salts contain many fungi that have potential to cause food spoilage as well as some that may be mycotoxigenic. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Total Weight and Axle Loads of Truck Units in the Transport of Timber Depending on the Timber Cargo

Directory of Open Access Journals (Sweden)

Grzegorz Trzciński

2018-03-01

Full Text Available When transporting timber, the high variability of species, assortments and moisture content of the wood raw material does not allow the weight of the transported timber to be precisely determined. This often contributes to the excessive weight loading of the entire truck unit. The aim of the research is to present the variability of the total weight of truck units with wood cargoes (GVW—gross vehicle weight depending on the weight of the empty unit and the transported timber load, as well as to analyze the changes in GVW, unit loads of wood and load on individual truck unit axles depending on the season. This study analyzes the total weight of truck units for 376 transports of Scots pine timber at different times of the year. The total weight of the truck units depends on the weight of an empty unit and the weight of the load. GVW was determined by using a weighbridge to weigh the vehicles and then the empty unit after unloading. The weight of the load was obtained as the difference between GVW and the tare. It was found that GVW differed significantly depending on the truck unit used, ranging from 43.60–58.80 Mg, often exceeding permissible limits for public roads. The individual axle loads for various truck units were also analyzed. The obtained results indicate that these loads are more equally distributed in the case of five-axle trucks compared to six-axle ones.

Forensic timber identification: It's time to integrate disciplines to combat illegal logging

Science.gov (United States)

Eleanor E. Dormontt; Markus Boner; Birgit Braun; Gerhard Breulmann; Bernd Degen; Edgard Espinoza; Shelley Gardner; Phil Guillery; John C. Hermanson; Gerald Koch; Soon Leong Lee; Milton Kanashiro; Anto Rimbawanto; Darren Thomas; Alex C. Wiedenhoeft; Yafang Yin; Johannes Zahnen; Andrew J. Lowe

2015-01-01

The prosecution of illegal logging crimes is hampered by a lack of available forensic timber identification tools, both for screening of suspectmaterial and definitive identification of illegally sourcedwood. Reputable timber traders are also struggling to police their own supply chains and comply with the growing requirement for due diligence with respect to timber...

Design of timber groynes

NARCIS (Netherlands)

Perdok, U.; Crossman, M.; Verhagen, H.J.; Howard, S.; Simm, J.

2003-01-01

The performance and durability of timber groynes (or 'groins') is highly dependent on the design and detailing of the structure. Using knowledge and experience developed over generations an effective functional design can be achieved, which may ultimately result in lower whole life costs and provide

The Level of Utilization of Secondary Timber Species among Furniture Producers

OpenAIRE

Antwi-Boasiako, Charles; Boadu, Kwadwo Boakye

2016-01-01

Background and Purpose: Inadequate supply of wood raw material is one of the major obstacles for the global furniture industry’s growth. Several secondary timbers/Lesser-Utilized-Species (LUS) that could substitute the scarce traditional timbers for furniture production exist in tropical forests. However, the industry continuously faces persistent timber shortages. The extent to which manufacturers utilize LUS as alternatives is unclear, which this study sought to ascertain. Materials and ...

Innovative Use and Characterization of Polymers for Timber-Related Construction

Directory of Open Access Journals (Sweden)

Mark Evernden

2010-02-01

Full Text Available Timber gridshells have become a very popular, efficient, sustainable and beautiful structural application of timber. However, given the slender laths involved in this form of construction, there is concern over the durability of timber for this purpose, and Glass FRP (GFRP laths have been proposed as a possible substitution. This paper considers this possibility. It goes on to look at the possible use of Basalt FRP (BFRP for the same purpose, from the perspective of its creep characteristics. It is shown that the use of GFRP gridshells is a viable form of construction, and that enhanced durability characteristics of BFRP could lead to their adoption for gridshells, given that the creep characteristics of basalt fibres presented here are comparable to those of glass fibres. An altogether different form of timber construction is that of joist-and-floorboard. In the UK, there are thousands of historic buildings which use this floor construction, and a sizeable proportion of this building stock now requires upgrade, strengthening and/or stiffening to allow these buildings to be fit for purpose into the future. This paper goes on to consider the possible use of Carbon FRP (CFRP to strengthen and stiffen such timber floors. It is shown that such strengthening and stiffening is entirely feasible, offering the potential for greatly enhanced stiffness, in particular. Further, it is shown that mechanical shear connection between CFRP and timber is best conducted using perpendicular-positioned screws, rather than raked screws.

Innovative Use and Characterization of Polymers for Timber-Related Construction

Science.gov (United States)

Darby, Antony; Ibell, Tim; Evernden, Mark

2010-01-01

Timber gridshells have become a very popular, efficient, sustainable and beautiful structural application of timber. However, given the slender laths involved in this form of construction, there is concern over the durability of timber for this purpose, and Glass FRP (GFRP) laths have been proposed as a possible substitution. This paper considers this possibility. It goes on to look at the possible use of Basalt FRP (BFRP) for the same purpose, from the perspective of its creep characteristics. It is shown that the use of GFRP gridshells is a viable form of construction, and that enhanced durability characteristics of BFRP could lead to their adoption for gridshells, given that the creep characteristics of basalt fibres presented here are comparable to those of glass fibres. An altogether different form of timber construction is that of joist-and-floorboard. In the UK, there are thousands of historic buildings which use this floor construction, and a sizeable proportion of this building stock now requires upgrade, strengthening and/or stiffening to allow these buildings to be fit for purpose into the future. This paper goes on to consider the possible use of Carbon FRP (CFRP) to strengthen and stiffen such timber floors. It is shown that such strengthening and stiffening is entirely feasible, offering the potential for greatly enhanced stiffness, in particular. Further, it is shown that mechanical shear connection between CFRP and timber is best conducted using perpendicular-positioned screws, rather than raked screws.

Topology Optimization and Robotic Fabrication of Advanced Timber Space-frame Structures

DEFF Research Database (Denmark)

Søndergaard, Asbjørn; Amir, Oded; Eversmann, Phillip

2016-01-01

This paper presents a novel method for integrated topology optimization and fabrication of advanced timber space-frame structures. The method, developed in research collaboration between ETH Zürich, Aarhus School of Architecture and Israel Institute of Technology, entails the coupling of truss...... processes solving timber joint intersections, robotically controlling member prefabrication, and spatial robotic assembly of the optimized timber structures. The implication of this concept is studied through pilot fabrication and load-testing of a full scale prototype structure.......-based topology optimization with digital procedures for rationalization and robotic assembly of bespoke timber members, through a procedural, cross-application workflow. Through this, a direct chaining of optimization and robotic fabrication is established, in which optimization data is driving subsequent...

Compression strength perpendicular to grain of structural timber and glulam

DEFF Research Database (Denmark)

Damkilde, Lars; Hoffmeyer, Preben; Pedersen, Torben N.

1998-01-01

The characteristic strength values for compression perpendicular to grain as they appear in EN 338 (structural timber) and EN 1194 (glulam) are currently up for discussion. The present paper provides experimental results based on EN 1193 that may assist in the correct assignment of such strength...... values. The dominant failure mode of glulam specimens is shown to be fundamentally different from that of structural timber specimens. Glulam specimens often show tension perpendicular to grain failure before the compression strength value is reached. Such failure mode is not seen for structural timber....... Nonetheless test results show that the levels of characteristic compression strength perpendicular to grain are of the same order for structural timber and glulam. The values are slightly lower than those appearing in EN 1194 and less than half of those appearing in EN 338. The paper presents a numerical...

Seismic retrofitting of timber framed walls

Directory of Open Access Journals (Sweden)

Gonçalves, A. M.

2014-12-01

Full Text Available After the 1755 earthquake that destroyed Lisbon, an innovative anti-seismic structural system was developed consisting of a timber skeleton, that included timber framed masonry walls. After more than 250 years these structures need rehabilitation to face the present demands. The research presented in this paper aimed at experimentally characterizing the cyclic behaviour of timber framed walls reinforced with three different methods, namely: (i elastic-plastic dampers on diagonal braces, (ii reinforcement of timber connections with steel plates, (iii application of a reinforced rendering. The elastic-plastic damper showed an unsymmetrical behaviour and some difficulties to implement in practice. The strengthening with reinforced render led to an initial stiffness increase but showed a limited deformation capacity. The walls with reinforcing steel plates at the timber connections showed the best behaviour in terms of strength, stiffness and energy dissipation.Después del terremoto de 1755 que destruyó Lisboa, un sistema estructural antisísmico muy innovador fue desarrollado. El sistema consistió en un esqueleto de madera, que incluyó la construcción de muros de mampostería con un entramado de madera. Transcurridos más de 250 años, estas estructuras necesitan rehabilitación para poder hacer frente a los requisitos estructurales actuales. La investigación presentada en este trabajo tiene como objetivo caracterizar experimentalmente el comportamiento cíclico de los muros con entramado de madera reforzados con tres métodos diferentes: (i amortiguadores elasto-plásticos, (ii refuerzo de las conexiones de madera con placas de acero, (iii aplicación de un mortero reforzado. El amortiguador elasto-plástico mostró un comportamiento asimétrico y algunas dificultades para aplicarlo en la práctica. El refuerzo con mortero reforzado condujo a un aumento de la rigidez inicial, pero reveló una capacidad de deformación limitada. Los muros con

State forest timber sales in 2006

International Nuclear Information System (INIS)

Office National des Forets

2007-01-01

For the first time since the 1999 storms, forest owners have experienced a favourable market. The combination of buoyant demand for both industrial round-wood and timber and consolidation of supply led to a significant increase in prices. With a logging volume of 15 million m 3 (standing timber equivalent), state forest timber supply has remained at a high level, slightly above that of 1999. The improved business cycle situation has pushed prices up, including for beech for which rates had stagnated for some time. However, in spite of the 15% rise compared to 2005, the average per cubic metre price sold by the ONF (31.20 euros), all categories of timber and all state forests taken together, remains well below the average for the 1996-1999 period (37.80 euros). While unsold stocks have fallen considerably, the ONF has sought to facilitate access to products by industry by modernising its sales methods in line with the new 2005 legislative and regulatory provisions. Greater flexibility in the rules applicable to privately negotiated spot sales and supply contracts should over time contribute to stabilizing and reducing the accessory costs of supply. The changes implemented over the last decade in favour of private sales, which now account for nearly 40% of volumes sold, should continue in the future. Of those volumes, 20% were sold under supply contracts, a proportion that is rising sharply. These contracts covered more than one million m 3 in 2006, encouraging the ONF to adopt a new sales scheme and establish structures for consultations with both forest municipalities and the downstream component of the industry. (authors)

Development of a six-year research needs assessment for timber transportation structures

Science.gov (United States)

Terry J. Wipf; Michael A. Ritter; Sheila Rimal Duwadi; Russell C. Moody

1993-01-01

A timber bridge, once a thing of the past, is now becoming a thing of the present. Interest in timber bridges and other transportation structures has been rapidly increasing. Much of this is due to new technologies in design and construction as well as advances in material manufacturing and presevative treatments. Although timber bridges and other transportation...

Grip for sawing round timber

Energy Technology Data Exchange (ETDEWEB)

1982-07-01

This paper describes a device development at Gedling Colliery, Nottinghamshire Area, United Kingdom. It is a gripping attachment, designed to overcome the safety hazards involved in cross cutting timbers with a circular saw.

Some background of monitoring and NDT also useful for timber structures

OpenAIRE

Kurz, Jochen Horst; Boller, Christian

2015-01-01

Extension of the life of existing and historic timber structures has increased steadily in the last decade. Sustainability and low carbon emission have influenced activities in the construction industry. In the frame of the European COST Action FP 1101, several activities related to timber structures have been clustered. The COST Action FP 1101 consists of three working groups, namely Assessment (Working Group 1), Reinforcement (Working Group 2) and Monitoring (Working Group 3) of Timber Stru...

Short-term forest management effects on a long-lived ectotherm.

Directory of Open Access Journals (Sweden)

Andrea F Currylow

Full Text Available Timber harvesting has been shown to have both positive and negative effects on forest dwelling species. We examined the immediate effects of timber harvests (clearcuts and group selection openings on ectotherm behavior, using the eastern box turtle as a model. We monitored the movement and thermal ecology of 50 adult box turtles using radiotelemetry from May-October for two years prior to, and two years following scheduled timber harvests in the Central Hardwoods Region of the U.S. Annual home ranges (7.45 ha, 100% MCP did not differ in any year or in response to timber harvests, but were 33% larger than previous estimates (range 0.47-187.67 ha. Distance of daily movements decreased post-harvest (from 22 m±1.2 m to 15 m±0.9 m whereas thermal optima increased (from 23±1°C to 25±1°C. Microclimatic conditions varied by habitat type, but monthly average temperatures were warmer in harvested areas by as much as 13°C. Animals that used harvest openings were exposed to extreme monthly average temperatures (∼40°C. As a result, the animals made shorter and more frequent movements in and out of the harvest areas while maintaining 9% higher body temperatures. This experimental design coupled with radiotelemetry and behavioral observation of a wild ectotherm population prior to and in response to anthropogenic habitat alteration is the first of its kind. Our results indicate that even in a relatively contiguous forested landscape with small-scale timber harvests, there are local effects on the thermal ecology of ectotherms. Ultimately, the results of this research can benefit the conservation and management of temperature-dependent species by informing effects of timber management across landscapes amid changing climates.

Probabilistic representation of duration of load effects in timber structures

DEFF Research Database (Denmark)

Svensson, Staffan

2011-01-01

Reliability analysis of structures for the purpose of code calibration or reliability verification of specific structures requires that the relevant failure modes are represented and analyzed. For structural timber, sustaining a life load, two failure cases for each failure mode have......-based design of timber structures in terms of a modification factor View the MathML source which is multiplied on the short-term resistance of the timber material. The scenario of a beam subject to office space life loads is analyzed and the modification factor View the MathML source is calibrated by using...... to be considered. These two cases are maximum load level exceeding load-carrying capacity and damage accumulation (caused by the load and its duration) leading to failure. The effect of both load intensity and load duration on the capacity of timber has been an area of large interest over the last decades...

Assessing the Sustainability of EU Timber Consumption Trends: Comparing Consumption Scenarios with a Safe Operating Space Scenario for Global and EU Timber Supply

Directory of Open Access Journals (Sweden)

Meghan O’Brien

2017-12-01

Full Text Available The growing demand for wood to meet EU renewable energy targets has increasingly come under scrutiny for potentially increasing EU import dependence and inducing land use change abroad, with associated impacts on the climate and biodiversity. This article builds on research accounting for levels of primary timber consumption—e.g., toward forest footprints—and developing reference values for benchmarking sustainability—e.g., toward land use targets—in order to improve systemic monitoring of timber and forest use. Specifically, it looks at future trends to assess how current EU policy may impact forests at an EU and global scale. Future demand scenarios are based on projections derived and adapted from the literature to depict developments under different scenario assumptions. Results reveal that by 2030, EU consumption levels on a per capita basis are estimated to be increasingly disproportionate compared to the rest of the world. EU consumption scenarios based on meeting around a 40% share of the EU renewable energy targets with timber would overshoot both the EU and global reference value range for sustainable supply capacities in 2030. Overall, findings support literature pointing to an increased risk of problem shifting relating to both how much and where timber needed for meeting renewable energy targets is sourced. It is argued that a sustainable level of timber consumption should be characterized by balance between supply (what the forest can provide on a sustainable basis and demand (how much is used on a per capita basis, considering the concept of fair shares. To this end, future research should close data gaps, increase methodological robustness and address the socio-political legitimacy of the safe operating space concept towards targets in the future. A re-use of timber within the economy should be supported to increase supply options.

Performance of a mid-sized harvester-forwarder system in integrated harvesting of sawmill, pulpwood and firewood

Directory of Open Access Journals (Sweden)

Andrei Ioan Apăfăian

2017-12-01

Full Text Available Fully mechanized timber harvesting systems are generally characterized by a high operational performance being widespread and used across many regions. Such systems are adaptable to different levels of operational integration, enabling also the recovery of energy wood, but given integration configurations affect their performance. A production study was carried out in a Norway spruce clear-cut aiming to investigate the performance of a mid-sized harvester-forwarder system in general, and the effect that fuelwood recovery from tree tops may have on its performance. Data was collected in the field during 11 days of observation using state-of-art equipment and software. Harvester’s operations were monitored using a digital camera. Data refined from 27.5 filmed hours that accounted for 1045 felled and fully processed trees was used to model and compute its performance indicators. In addition, fuel consumption data was sampled in the field. The results indicated that a delay-free cycle time consumption was affected by variables characterizing the tree size. The net production rate was estimated to about 26.5 m3 ∙ h-1, being substantially affected by supplementary tree-top processing. Forwarding operations were monitored using a handheld computer and a Global Positioning System unit. The delay-free cycle time consumption was affected by forwarding distance and the amount of loaded wood, resulting in a net production rate of about 19.2 m3 ∙ h-1. Under these circumstances, the forwarding performance matched the harvester’s outputs for an extraction distance of about 100 m, indicating that the supplementary processing of the tree-tops had no effect on the system’s productive performance in the studied conditions. Most likely, it affected the harvester’s fuel consumption given its proportion of 9% in the delay-free harvester’s cycle time. The results also indicated a mean fuel consumption of about 1.7 l ∙ m-3 for the studied harvesting

Pre-Stressing Timber-Based Plate Tensegrity Structures

DEFF Research Database (Denmark)

Falk, Andreas; Kirkegaard, Poul Henning

2012-01-01

Tensile structures occur in numerous varieties utilising combinations of tension and compression. Introducing structural plates in the basic tensegrity unit and tensegric assemblies varies the range of feasible topologies and provides the structural system with an integrated surface. The present...... paper considers the concept of plate tensegrity based on CLT plates (cross-laminated timber). It combines the principles of tensegrity with the principles of plate shells and is characterised by a plate shell stabilised by struts and cables. The paper deals with material aspects and robustness of timber...

Statistical Analysis of Data for Timber Strengths

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard

2003-01-01

Statistical analyses are performed for material strength parameters from a large number of specimens of structural timber. Non-parametric statistical analysis and fits have been investigated for the following distribution types: Normal, Lognormal, 2 parameter Weibull and 3-parameter Weibull...... fits to the data available, especially if tail fits are used whereas the Log Normal distribution generally gives a poor fit and larger coefficients of variation, especially if tail fits are used. The implications on the reliability level of typical structural elements and on partial safety factors...... for timber are investigated....

36 CFR 13.485 - Subsistence use of timber and plant material.

Science.gov (United States)

2010-07-01

... cutting of standing timber by local rural residents for appropriate subsistence uses, such as firewood or... materials for subsistence uses, and the noncommerical gathering of dead or downed timber for firewood, shall...

Accounting for Forest Harvest and Wildfire in a Spatially-distributed Carbon Cycle Process Model

Science.gov (United States)

Turner, D. P.; Ritts, W.; Kennedy, R. E.; Yang, Z.; Law, B. E.

2009-12-01

Forests are subject to natural disturbances in the form of wildfire, as well as management-related disturbances in the form of timber harvest. These disturbance events have strong impacts on local and regional carbon budgets, but quantifying the associated carbon fluxes remains challenging. The ORCA Project aims to quantify regional net ecosystem production (NEP) and net biome production (NBP) in Oregon, California, and Washington, and we have adopted an integrated approach based on Landsat imagery and ecosystem modeling. To account for stand-level carbon fluxes, the Biome-BGC model has been adapted to simulate multiple severities of fire and harvest. New variables include snags, direct fire emissions, and harvest removals. New parameters include fire-intensity-specific combustion factors for each carbon pool (based on field measurements) and proportional removal rates for harvest events. To quantify regional fluxes, the model is applied in a spatially-distributed mode over the domain of interest, with disturbance history derived from a time series of Landsat images. In stand-level simulations, the post disturbance transition from negative (source) to positive (sink) NEP is delayed approximately a decade in the case of high severity fire compared to harvest. Simulated direct pyrogenic emissions range from 11 to 25 % of total non-soil ecosystem carbon. In spatial mode application over Oregon and California, the sum of annual pyrogenic emissions and harvest removals was generally less that half of total NEP, resulting in significant carbon sequestration on the land base. Spatially and temporally explicit simulation of disturbance-related carbon fluxes will contribute to our ability to evaluate effects of management on regional carbon flux, and in our ability to assess potential biospheric feedbacks to climate change mediated by changing disturbance regimes.

Robustness Analysis of a Wide-Span Timber Structure with Ductile Behaviour

DEFF Research Database (Denmark)

Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; Cizmar, D.

2010-01-01

This paper considers robustness evaluation of a wide span timber truss structure where the ductile behavior is taken into account. The robustness analysis is based on a structural reliability framework used on a simplified mechanical system modelling a timber truss system. A measure of ductile...... behaviour is introduced and for different values of this measure the robustness indices are estimated. The results indicate that the robustness of a timber truss system can be increased by taking the ductile behavior into....

36 CFR 294.24 - Timber cutting, sale, or removal in Idaho Roadless Areas.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Timber cutting, sale, or..., DEPARTMENT OF AGRICULTURE SPECIAL AREAS Idaho Roadless Area Management § 294.24 Timber cutting, sale, or removal in Idaho Roadless Areas. (a) Wild Land Recreation. The cutting, sale, or removal of timber is...

125 Timber Dealers' Perception of their Knowledge of the Forest ...

African Journals Online (AJOL)

Nekky Umera

Abstract. This study investigated timber dealers' knowledge of the forest law and regulations in Uyo Senatorial District. Five timber markets were selected through two-stage sampling. Data were collected from 238 traders in the selected markets using structured questionnaires and subjected to descriptive and inferential ...

The Dendrochronological Dating of Timber Crossings in West Jutland, Denmark

DEFF Research Database (Denmark)

Daly, Aoife

2006-01-01

The dendrochronological analyses of a large number of timbers from two sites are described. Nybro causeway in west Jutland, Denmark, which was built in the 8th century AD, consists of numerous phases, identifiable due to the large number of dendrochronologically dated timbers, of which many had...

The role of succulent halophytes in the water balance of salt marsh rodents.

Science.gov (United States)

Coulombe, Harry N

1970-09-01

The role of succulent halophytes in the water balance and ecology of salt marsh rodents is dependent upon an evaluation of the composition of the available sources and the physiological properties of their potential consumers. Studies of the osmotic properties of succulent halophytes from southern California coastal salt marshes are presented, together with experiments regarding the utilization of Common Pickleweed (Salicornia virginica L.) by indigenous populations of cricetid rodents (harvest mouse Reithrodontomys megalotis limicola Von Bloecker, and meadow-mouse Microtus californicus stephensi Von Bloecker). These data are discussed in relation to other available information concerning the ecology of coastal salt marshes, particularly in western North America.Extruded sap of Common Pickleweed was found to have a mean total osmotic pressure (TOP) of 1,450 mOsm/liter, with an average chloride ion content of 876 mEq/liter (about 70% of the TOP). A related species, Salicornia subterminale, had a slightly lower TOP (1,300 mOsm/liter), of which about 29% was accounted for by chloride ion concentration. Sea Blight (Suaeda fruticosa) was the only species in which the TOP correlated with the distance from the tide level; sap TOP increased away from the lagoon's edge. In both Sea Blight and Common Pickle weed, TOP was not directly related to chloride content, indicating the importance of other osmotically active solutes.Harvest mice were placed on three experimental regimes: 1) millet seeds only, 2) pickleweed only, and 3) pickleweed and millet seed. Meadow mice were tested on the last regime only. Harvest mice survived best on a strict millet seed diet; when Salicornia was consumed to a detectable extent, the mice did not survive. Meadow mice, however, could survive using Salicornia as a dietary source in conjunction with seeds. Kidney electrolyte concentrating abilities indicated that harvest mice should be able to utilize pickleweed; this was not confirmed in my

The relationships of forest biodiversity and rattan jernang (Deamonorops draco sustainable harvesting by Anak Dalam tribe in Jambi, Sumatra

Directory of Open Access Journals (Sweden)

ANDRIO ADIWIBOWO

Full Text Available Adiwibowo A, Sulasmi IS. 2012. Relationships of forest biodiversity and rattan jernang (Deamonorops draco sustainable harvesting by Anak Dalam tribe in Jambi, Sumatra. Biodiversitas 13: 00-00. Conservation of tropical trees can be achieved if supported by the sustainable use of forest by community live nearby through harvesting of non timber woods, for instance rattan. Furthermore, rattan jernang individuals and trees have significant associations. Therefore, objective of this paper is to investigate the utilization of rattan jernang (Deamonorops draco Wild related to the forest tree biodiversity by Anak Dalam tribe in several villages in Jambi, Sumatra. The study has identified that populations of Deamonorops draco were varied among villages, ranged from 40 to 71 clumps in the forests and up to 500 clumps in plantations. Moreover, 73 individual trees consisted of 32 species were identified as rattan host and conserved by the community. Dialium platyespalyum. Quercus elmeri, and Adinandra dumosa were rattan host trees with the highest populations. Meanwhile, a biodiversity of non-host trees consisted of 30 individual trees from 16 species. Interviews revealed that traditional harvesters have acknowledged that trees have significant important ecological roles for the rattan livelihood and therefore it is very important to conserve the forests for the sustainability of harvest in the future. Furthermore, to secure the availability of rattan, the traditional harvesters had started rattan plantation.

System Reliability of Timber Structures

DEFF Research Database (Denmark)

Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

2010-01-01

elements, alternate load path(s) etc. in the structural design. In general these characteristics can have a positive influence on system reliability of a structure however, in Eurocodes ductility is only awarded for concrete and steel structures but not for timber structures. It is well......-know that structural systems can redistribute internal forces due to ductility of a connection, i.e. some additional loads can be carried by the structure. The same effect is also possible for reinforced concrete structures and structures of steel. However, for timber structures codes do not award that ductility......For reduction of the risk of collapse in the event of loss of structural element(s), a structural engineer may take necessary steps to design a collapse-resistant structure that is insensitive to accidental circumstances e.g. by incorporating characteristics like redundancy, ties, ductility, key...

Dowelled structural connections in laminated bamboo and timber

OpenAIRE

Reynolds, Thomas Peter; Sharma, Bhavna; Harries, Kent; Ramage, Michael Hector

2015-01-01

Structural sections of laminated bamboo can be connected using methods common in timber engineering, however the different material properties of timber and laminated bamboo suggest that the behaviour of connections in the two materials would not be the same. This study investigates the dowelled connection, in which a connector is passed through a hole in the material, and load is resisted by shear in the connector and embedment into the surrounding material. Steel dowels were used in a conne...

Assessment of demand and supply of timber products in Benue ...

African Journals Online (AJOL)

This study examines demand and supply of timber products in Benue State Nigeria with a view to highlighting the responsiveness of forest policy implementation. The scope of the study lies on plantation establishment targets and costs for 1999 to 2003, actual plantation establishment, timber supply and demand from ...

Guidelines for the on-site assessment of historic timber structures

NARCIS (Netherlands)

Cruz, H.; Yeomans, D.; Tsakanika, E.; Macchioni, N.; Jorissen, A.J.M.; Touza, M.; Mannucci, M.; Lourenco, P.B.

2014-01-01

In the scope of COST IE0601-WoodCulther (http://www.woodculther.org) it was agreed to produce Guidelines for the Assessment of Historic Timber Structures, covering the principles and possible approaches for the safety assessment of old timber structures of historical relevance, that could be used as

Influence Of Density On The Durabilities Of Three Ghanaian Timbers ...

African Journals Online (AJOL)

Review of factors influencing wood durability shows although density varies depending on trunk position, its role appears controversial for many timber species. Thus, for the first time, the influence of density on the durability of three Ghanaian timbers (Nauclea diderrichii (de Wild.) Merr., Nesogordonia papaverifera (A. Chev ...

Protection of mechanized timberings on beds dangerous for mine impacts

Energy Technology Data Exchange (ETDEWEB)

Budirsky, S

1982-01-01

In some stoping faces on beds which are dangerous for mine impacts, mechanized timbering is successfully used which is not equipped with protection from the effect of these dynamic phenomena. This generated the idea that in the indicated conditions, mechanized timbering may not be equipped with protective devices against dynamic loads. Theoretical studies have shown that the effects of mine impacts depends on the total energy of the impact, distance of this stoping face from the epicenter of the impact, as well as the capacity of the rock massif to transmit and absorb energy of the mine impact. This means that the effect of the mine impact under different conditions is not the same, the mine impacts of lower energy under definite conditions can result in greater damages to the mechanized timbering than mine impact with higher energy. It is believed that the effect of absorption of energy of the mine impact depends on the method of control of the roofing in the stoping face, the presence of hydraulic fill quarantees absorption of up to 80% of its energy. The experience of working beds which are dangerous for mine impacts in the upper Silesia coal basin indicated that the designs of the mechanized timbering, especially shield, in which the stands are not rigidly connected to the roof timber, during operation on beds with thickness 2.5-4 m withstand mine impacts with energy 10/sup 7/ J without significant disorders (mine impacts with this energy occur very frequently . For energy of mine impact of 108 J (impacts with this energy are observed comparatively rarely), the mechanized timberings are considerably damaged.

Effects of forest fuels extraction (whole tree harvesting) and ash recycling, experience and results from Swedish research

International Nuclear Information System (INIS)

Westling, Olle; Egnell, Gustaf; Dahlberg, Anders

2005-01-01

This review of Swedish research and environmental assessment studies during more than a decade is based on an ongoing synthesis of long term experiments with whole tree harvesting and wood ash recycling and other relevant research. The review is focused on effects of whole tree harvesting and compensatory fertilisation (wood ash) on forest production, biodiversity and soil and surface water. The studied extraction of biofuels (logging residues) from forest is primarily a complement to the conventional harvest of pulpwood and timber. General conclusions are that a large part of the theoretical potential of extraction of logging residues, in the form of branches and tops, can be utilised on condition that the losses of nutrients and acid neutralising capacity are compensated for through nutrient addition. To protect valuable fauna and flora, biotopes where conventional forestry is presently not applied should, with some exceptions, not be utilised for extraction of biofuels. The usage of wood ashes and other fertilisers will not increase the net accumulation of heavy metals and toxic organic elements in the forest ecosystems, on condition that the concentrations are low in the fertilisers

Moment Capacity of Timber Reinforced with Punched Metal Plate Fasteners

DEFF Research Database (Denmark)

Nielsen, Jacob; Ellegaard, Peter

When designing timber trusses it is often found that the cross section controlling the dimensions of the top chord is located at a joint with a moment peak. However, the timber volume affected by the moment peak is rather limited and by embedding a punched metal plate in this area a reinforcement...... of the section is obtained, resulting in a more economic truss design. In order to develop design methods for sections with plate reinforcement, bending tests have been made. The timber is Swedish spruce of strength class K-18(S8) and K-24(S10) with a thickness of 45 mm. The punched metal plate is from Gang...

Timber - Material of the Future - Examples of Small Wooden Architectural Structures

Science.gov (United States)

Żmijewki, Tomasz; Wojtowicz-Jankowska, Dorota

2017-10-01

The aim of this article is to present various types of wood-based products, classified as engineered timber, while specifying the implications of their structural properties for their forms. Timber is used as a construction material due to its fire resistance, good structural characteristics and insulating properties. The advent of new technologies of wood processing and wood-based materials production has converted timber into a high-tech material, thus encouraging the architects to consider it ever more often in their projects. As wooden technologies overcome constraints, timber begins to compete with steel and concrete. The design characteristics of new wood-based products allow wooden structures to be higher, have larger spans, and more diverse forms than ever. Wood-based materials include materials made of solid wood, veneers, strand, and wood which, due to its inferior quality, would otherwise be unfit for constructions. Elements and layers of these products are glued using different kinds of strong and water-resistant adhesives. The article presents the history of development of new wood technologies, discussing increasingly popular wood-based materials such as glued laminated timber, cross-laminated timber, or structural composite lumber. The paper analyses their technical and fire-resistance properties, and points to ecological aspect, as factors contributing to the growing popularity of these materials. Finally, the timber’s characteristics are contrasted with those of steel and concrete. The article lists examples of wooden objects representing the so-called small architecture structures from across Europe. They illustrate the potential, the uniqueness and the versatility that wood-based materials offer for constructors and architects. All these features form sufficient grounds for stating that timber truly is a construction material of the 21st century.

Timber Elements: Traditional and Modern Strengthening Techniques

Directory of Open Access Journals (Sweden)

Raluca Hohan

2010-01-01

Full Text Available The main idea of this paper is to analyse the means for the rehabilitation of our cultural heritage timber structures. Several methods together with their application techniques are described, and also, the reasons for what these strengthening operations become imminent at a point. First of all, the necessity of the timber structural elements strengthening is explained through a short presentation of the factors which are degrading the material. Then, certain precautions and strengthening procedures are presented, all involving the usage of traditional materials like wood, metal, or concrete, and of modern materials like fiber reinforced polymeric composite.

T-section glulam timber bridge modules : modeling and performance

Science.gov (United States)

Paul A. Morgan; Steven E. Taylor; Michael A. Ritter; John M. Franklin

1999-01-01

This paper describes the design, modeling, and testing of two portable timber bridges, each consisting of two noninterconnected longitudinal glued-laminated timber (glulam) deck panels 1.8 m (6 ft) wide. One bridge is 12.2 m (40 ft) long while the other bridge is 10.7 m (35 ft) long. The deck panels are fabricated in a unique double-tee cross section. The bridges...

Tree-mendous Timber Evaluation

Science.gov (United States)

2004-01-01

Funded and administered by NASA, the Affiliated Research Center (ARC) program transfers geospatial technologies from the Space Agency and participating universities to commercial companies, non-profit and trade organizations, and tribal governments. The origins of the ARC program date back to 1988, when NASA's Stennis Space Center initiated the Visiting Investigator Program to bring industry closer to spatial information technologies. The success of this trial program led to an expansion into the ARC program, whose goal is to enhance competitiveness of U.S. industries through more efficient use of remote sensing and related technologies. NASA's ARC program served as the foundation for the development of International Hardwood Resources, which then grew into Falcon Informatics with the acquisition of a technology from a European software company and a change of business models. Doylestown, Pennsylvania-based Falcon Informatics is now a world-leading information services company that combines in-depth timber industry experience with state-of-the-art software to serve the needs of national governments, international paper companies, and timber-investment management organizations.

Predicting moisture state of timber members in a continuously varying climate

DEFF Research Database (Denmark)

Svensson, Staffan; Turk, Goran; Hozjan, Tomaz

2011-01-01

A prerequisite for a sensible estimate of moisture induced stresses in timber members is an accurate prediction of the members’ moisture states during their service life. There are, however, an infinite number of possible moisture states for an arbitrary timber member in a natural varying climate...... the realizations were made, are based on a fully coupled transport model including a model for the influential sorption hysteresis of wood. A format containing required information suitable for assessing the “moisture” action on timber members is proposed. In addition it is illustrated how a model of high...

Reliability Analysis of Timber Structures through NDT Data Upgrading

DEFF Research Database (Denmark)

Sousa, Hélder; Sørensen, John Dalsgaard; Kirkegaard, Poul Henning

The first part of this document presents, in chapter 2, a description of timber characteristics and common used NDT and MDT for timber elements. Stochastic models for timber properties and damage accumulation models are also referred. According to timber’s properties a framework is proposed...... for a safety reassessment procedure. For that purpose a theoretical background for structural reliability assessment including probabilistic concepts for structural systems and stochastic models are given in chapter 3. System models, both series and parallel systems, are presented as well as methods...... for robustness are dealt in chapter 5. The second part of this document begins in chapter 6, where a practical application of the premise definitions and methodologies is given through the implementation of upgraded models with NDT and MDT data. Structural life-cycle is, therefore, assessed and reliability...

Appropriateness of Probit-9 in development of quarantine treatments for timber and timber commodities

Science.gov (United States)

Marcus Schortemeyer; Ken Thomas; Robert A. Haack; Adnan Uzunovic; Kelli Hoover; Jack A. Simpson; Cheryl A. Grgurinovic

2011-01-01

Following the increasing international phasing out of methyl bromide for quarantine purposes, the development of alternative treatments for timber pests becomes imperative. The international accreditation of new quarantine treatments requires verification standards that give confidence in the effectiveness of a treatment. Probit-9 mortality is a standard for treatment...

Approaches Towards Valuing Local and Indigenous Peoples’ Use of ‘Non-Timber Forest Products’ in the Context of Land Acquisition

Directory of Open Access Journals (Sweden)

Hans Morten Haugen

2011-06-01

Full Text Available The undervaluation of traditional harvesting from forest and other lands is a common pattern. This has made many persons claim that certain lands singled out for biofuels projects is ‘not in use’. Such erroneous statements can easily be challenged, but it is considerably more demanding to calculate the overall value of harvesting for local communities. The term ‘ecosystem services’ has gained increased attention, primarily by emphasising the carbon capture capacity of both forests and other lands. This approach has enhanced the motivation for conserving the land. By acknowledging the need not only to conserve the land, but also allow sustainable harvesting from the land, in accordance with the governing the commons framework, the article identifies the most central human rights provisions and analyse their relevance in order to better acknowledge the importance of non-timber forest products. The emphasis will be on identifying the content and scope of the substantive human rights as they apply to control over and use of natural resources. The relevance of the article is evidenced by FAO’s initiative to adopt Voluntary Guidelines on Responsible Governance of Tenure of Land and other Natural Resources, scheduled to be adopted in 2011. FAO itself says that the Voluntary Guidelines-initiative seeks to build on a human rights approach, which makes the present analysis most pertinent.

A Feasibility Study on Timber Damage Detection Using Piezoceramic-Transducer-Enabled Active Sensing

Directory of Open Access Journals (Sweden)

Jicheng Zhang

2018-05-01

Full Text Available In recent years, piezoelectric-based transducers and technologies have made significant progress towards structural health monitoring and damage evaluation for various metal and concrete structures. Timber is still commonly used as a construction material in practical engineering; however, there is a lack of research on the health monitoring of timber-based structures using piezoelectric-based transducers and methods. This paper conducts a feasibility study on timber damage detection using surface-mounted piezoelectric patches, which enable the stress-wave-based active sensing approach. Typical damage modes in timber frame structures, such as surface cracks and holes, were investigated in this study. In the active sensing approach, one piezoceramic transducer is used as an actuator to generate stress waves, which propagate along the surface of the timber structure, and other piezoceramic transducers function as sensors to detect the propagating stress waves. Defects, such as a crack or a hole, induce additional attenuation to the propagating stress wave. Based on this attenuation, the proposed method can detect the defects using the wavelet-packet-based damage index, demonstrating its implementation potential for real-time timber damage detection.

Molecular breeding in Brassica for salt tolerance: importance of microsatellite (SSR) markers for molecular breeding in Brassica.

Science.gov (United States)

Kumar, Manu; Choi, Ju-Young; Kumari, Nisha; Pareek, Ashwani; Kim, Seong-Ryong

2015-01-01

Salinity is one of the important abiotic factors for any crop management in irrigated as well as rainfed areas, which leads to poor harvests. This yield reduction in salt affected soils can be overcome by improving salt tolerance in crops or by soil reclamation. Salty soils can be reclaimed by leaching the salt or by cultivation of salt tolerance crops. Salt tolerance is a quantitative trait controlled by several genes. Poor knowledge about mechanism of its inheritance makes slow progress in its introgression into target crops. Brassica is known to be a good reclamation crop. Inter and intra specific variation within Brassica species shows potential of molecular breeding to raise salinity tolerant genotypes. Among the various molecular markers, SSR markers are getting high attention, since they are randomly sparsed, highly variable and show co-dominant inheritance. Furthermore, as sequencing techniques are improving and softwares to find SSR markers are being developed, SSR markers technology is also evolving rapidly. Comparative SSR marker studies targeting Arabidopsis thaliana and Brassica species which lie in the same family will further aid in studying the salt tolerance related QTLs and subsequent identification of the "candidate genes" and finding out the origin of important QTLs. Although, there are a few reports on molecular breeding for improving salt tolerance using molecular markers in Brassica species, usage of SSR markers has a big potential to improve salt tolerance in Brassica crops. In order to obtain best harvests, role of SSR marker driven breeding approaches play important role and it has been discussed in this review especially for the introgression of salt tolerance traits in crops.

Molecular breeding in Brassica for salt tolerance: importance of microsatellite (SSR) markers for molecular breeding in Brassica

Science.gov (United States)

Kumar, Manu; Choi, Ju-Young; Kumari, Nisha; Pareek, Ashwani; Kim, Seong-Ryong

2015-01-01

Salinity is one of the important abiotic factors for any crop management in irrigated as well as rainfed areas, which leads to poor harvests. This yield reduction in salt affected soils can be overcome by improving salt tolerance in crops or by soil reclamation. Salty soils can be reclaimed by leaching the salt or by cultivation of salt tolerance crops. Salt tolerance is a quantitative trait controlled by several genes. Poor knowledge about mechanism of its inheritance makes slow progress in its introgression into target crops. Brassica is known to be a good reclamation crop. Inter and intra specific variation within Brassica species shows potential of molecular breeding to raise salinity tolerant genotypes. Among the various molecular markers, SSR markers are getting high attention, since they are randomly sparsed, highly variable and show co-dominant inheritance. Furthermore, as sequencing techniques are improving and softwares to find SSR markers are being developed, SSR markers technology is also evolving rapidly. Comparative SSR marker studies targeting Arabidopsis thaliana and Brassica species which lie in the same family will further aid in studying the salt tolerance related QTLs and subsequent identification of the “candidate genes” and finding out the origin of important QTLs. Although, there are a few reports on molecular breeding for improving salt tolerance using molecular markers in Brassica species, usage of SSR markers has a big potential to improve salt tolerance in Brassica crops. In order to obtain best harvests, role of SSR marker driven breeding approaches play important role and it has been discussed in this review especially for the introgression of salt tolerance traits in crops. PMID:26388887

Agroforestry systems of timber species and cacao: survival and growth during the early stages

Directory of Open Access Journals (Sweden)

Wilmer Espinoza

2013-08-01

Full Text Available In recent times, increased emphasis has been placed on diversifying the types of trees to shade cacao (Theobromacacao L. and to achieve additional services. Agroforestry systems that include profitable and native timber trees are a viable alternative but it is necessary to understand the growth characteristics of these species under different environmental conditions. Thus, timber tree species selection should be based on plant responses to biotic and abiotic factors. The aims of this study were (1 to evaluate growth rates and leaf area indices of the four commercial timber species: Cordia thaisiana, Cedrela odorata, Swietenia macrophylla and Tabebuia rosea in conjunction with incidence of insect attacks and (2 to compare growth rates of four Venezuelan Criollo cacao cultivars planted under the shade of these four timber species during the first 36 months after establishment. Parameters monitored in timber trees were: survival rates, growth rates expressed as height and diameter at breast height and leaf area index. In the four Cacao cultivars: height and basal diameter. C. thaisiana and C. odorata had the fastest growth and the highest survival rates. Growth rates of timber trees will depend on their susceptibility to insect attacks as well as to total leaf area. All cacao cultivars showed higher growth rates under the shade of C. odorata. Growth rates of timber trees and cacao cultivars suggest that combinations of cacao and timber trees are a feasible agroforestry strategy in Venezuela.

Field investigations of historic covered timber bridges in the USA

Science.gov (United States)

James Wacker; Travis Hosteng; Brent. Phares

2012-01-01

The Federal Highway Administration is sponsoring a comprehensive research program on Historic Covered Timber Bridges in the USA. This national program's main purpose is to develop improved methods to preserve, rehabililate, and restore the timber bridge trusses that were developed during the early 1800s, and in many cases are still in service today. The overall...

Projecting national forest inventories for the 2000 RPA timber assessment.

Science.gov (United States)

John R. Mills; Xiaoping. Zhou

2003-01-01

National forest inventories were projected in a study that was part of the 2000 USDA Forest Service Resource Planning Act (RPA) timber assessment. This paper includes an overview of the status and structure of timber inventory of the National Forest System and presents 50-year projections under several scenarios. To examine a range of possible outcomes, results are...

Nondestructive assessment of timber bridges using a vibration-based method

Science.gov (United States)

Xiping Wang; James P. Wacker; Robert J. Ross; Brian K. Brashaw

2005-01-01

This paper describes an effort to develop a global dynamic testing technique for evaluating the overall stiffness of timber bridge superstructures. A forced vibration method was used to measure the natural frequency of single-span timber bridges in the laboratory and field. An analytical model based on simple beam theory was proposed to represent the relationship...

Robustness of Long Span Reciprocal Timber Structures

DEFF Research Database (Denmark)

Balfroid, Nathalie; Kirkegaard, Poul Henning

2011-01-01

engineer may take necessary steps to design robust structures that are insensitive to accidental circumstances. The present paper makes a discussion of such robustness issues related to the future development of reciprocal timber structures. The paper concludes that these kind of structures can have...... a potential as long span timber structures in real projects if they are carefully designed with respect to the overall robustness strategies.......Robustness of structural systems has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. The interest has also been facilitated due to recently severe structural failures...

Dry creek long-term watershed study: buffer zone performance as viable amphibian habitat

Science.gov (United States)

Brooke L. Talley; Thomas L. Crisman

2006-01-01

As bioindicators, amphibians typically require both terrestrial and aquatic habitats to complete their life cycles. Pre- timber-harvest monitoring (December 2002 through September 2003) of salamander and frog (Hylidae) populations was conducted in four watersheds of Decatur County, GA. Post- timber-harvest monitoring (December 2003 through September...

Global timber trade pattern: the cards have changed

OpenAIRE

Roda Jean-Marc; Rohana Abd Rahman; Ismariah Ahmad; Lim Hin Fui; Mohd Parid Mamat

2011-01-01

Since the 1960s, the global timber trade has gradually evolved from a South-North trade to a South-South trade, with an acceleration of the phenomenon in the mid 1990s. Nowadays, Asia consumes more than 70% (in round wood equivalent) of the forest products originating from the tropics. Africa becomes the new frontier for the supplies of wood material for Asian giants, which now source raw wood from all over the world. Since the mid 1990s, the dynamics of the tropical timber trade have been in...

Responses of timber rattlesnakes to fire: Lessons from two prescribed burns

Science.gov (United States)

Steven J. Beaupre; Lara E. Douglas

2012-01-01

Timber rattlesnakes (Crotalus horridus) are excellent model organisms for understanding the effects of large scale habitat manipulations because of their low-energy lifestyle, rapid response to changes in resource environment, uniform diet (small mammals), and simple behaviors. We present two case studies that illustrate interactions between timber...

Elementary and advanced modelling of the splitting strength of timber connections

NARCIS (Netherlands)

Schoenmakers, J.C.M.D.

2008-01-01

The load-bearing capacity of a timber member loaded perpendicular-to-grain by a connection is governed by either the embedment strength, the bending yield strength of the steel fasteners, or the splitting strength of the timber. Only coarse models for predicting the splitting strength are

Can Structural Timber Foster Short Procurement Chains within Mediterranean Forests? A Research Case in Sardinia

Directory of Open Access Journals (Sweden)

Massimo Fragiacomo

2015-06-01

Full Text Available Background and Purpose: The aim of this paper is to present the idea of a timber short procurement chain as a means to provide an increased value to Mediterranean forests. It is based on the evidence that timber buildings are increasingly used for a number of reasons including sustainability, the speed of erection, and excellent structural and seismic performance. However, most of the timber currently used around the Mediterranean is imported from outside this area. Materials and Methods: The idea is to use the best part of the tree to produce timber boards, while all the remaining part of the tree including the production waste is used for energy production. Important issues to address are the generally low mechanical properties of locally-grown timber such as maritime pine in Sardinia, which would make some wood-based products such as glue-laminated timber not technically viable. Cross-laminated timber panels are a possible solution to this problem because this wood-based product is manufactured in such a way that even with low-quality timber boards it is possible to obtain a medium quality panel. The panel is made of layers of timber boards with the adjacent layers glued under pressure at a right angle. Another issue is the need to grade the local timber, for which a number of specimens must be tested to destruction in order to identify a visual or a machine-stress grading procedure. Last but not least, the panels must be tested to destruction to correlate their mechanical properties to the properties of the boards. Results: The preliminary mechanical tests carried out on Sardinia maritime pine confirm that the material is low-grade because it is characterized by large knots and a significant grain deviation. Nevertheless, when used in the cross-laminated panels, the properties are significantly improved due to the layout of the panel which reduces the influence of defects in the boards on the mechanical properties of the panel. Conclusions

Robustness Analyses of Timber Structures

DEFF Research Database (Denmark)

Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; Hald, Frederik

2013-01-01

The robustness of structural systems has obtained a renewed interest arising from a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. In order to minimise the likelihood of such disproportionate structural failures, many mo...... with respect to robustness of timber structures and will discuss the consequences of such robustness issues related to the future development of timber structures.......The robustness of structural systems has obtained a renewed interest arising from a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. In order to minimise the likelihood of such disproportionate structural failures, many...... modern building codes consider the need for the robustness of structures and provide strategies and methods to obtain robustness. Therefore, a structural engineer may take necessary steps to design robust structures that are insensitive to accidental circumstances. The present paper summaries issues...

Radiation technique in density and strength testing of coniferous structural timber

International Nuclear Information System (INIS)

Dzbenski, W.; Krzosek, S.

1998-01-01

The control process of intermediate and final wood products manufacturing is more and more frequently assisted by flow detectors. In radiation devices cesium isotope 137 Cs is replaced by less harmful americium 241 Am. Americium 241 Am was used in the measuring device made in The Academy of Mining and Metallurgy in Cracow. The device was applied in Warsaw Agricultural University (SGGW) in research on Polish structural timber. Negative influence of anatomical defects (knots, compression wood, resinasis, slope of grain, decay) was estimated by gammascopy method. Botanical species (pine, spruce), position in a stem (sapwood, heartwood), anatomical direction (radial, tangential) and moisture content were taken into account. The method of determination a critical place in timber were density is the lowest value (what is an obligatory criterion of stress graded structural timber according to EN standards) was developed. The practical implementation of the method can be reached when sawmills producing structural timber (especially for export) will be more interested in using miniaturized isotope densitometers. (author)

Timber drying kilns using solar energy

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-15

The objective of this project was to research the potential for solar kilns for drying timber in tropical countries (Guyana, Honduras and Belize) and produce a manual which will provide the knowledge necessary to build and operate a solar kiln. The main output of the project is the manual Solar Heated Timber Drying Kilns - a Manual on their Design and Operation. The manual covers:- background information; selection of construction materials; methods of kiln construction; kiln operation and maintenance procedure. The manual has been designed to provide the necessary knowledge and confidence to build and operate a solar kiln, and ultimately benefit from an improved product. Specifically, the manual will benefit small building construction units, furniture and joinery manufacturers and sawmill operators in developing and developed countries worldwide. (author)

Timber resource statistics for the Yakataga inventory unit, Alaska, 1976.

Science.gov (United States)

Willem W.S. van Hees

1985-01-01

Statistics on forest area, total gross and net timber volumes, and annual net growth and mortality are presented from the 1976 timber inventory of the Yakataga unit, Alaska. Timberland area is estimated at 209.3 thousand acres (84.7 thousand ha), net growing stock volume at 917.1 million cubic feet (26.0 million m3), and annual net growth and...

Simplified Analytical Model for a Queen-Post Covered Timber Bridge

Science.gov (United States)

F Fanous; D. Rammer; T. Wipf

2013-01-01

During the 19th century, the economic material to build bridges was timber due to its abundant availability, cost, and ease of construction. Many of the well-known timber bridge types are the Burr arch, Town lattice, Howe, Queen and King type of trusses. This paper summarizes an investigation that was sponsored by the Federal Highway Administration and the USDA Forest...

A Probabilistic Approach for Robustness Evaluation of Timber Structures

DEFF Research Database (Denmark)

Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

of Structures and a probabilistic modelling of the timber material proposed in the Probabilistic Model Code (PMC) of the Joint Committee on Structural Safety (JCSS). Due to the framework in the Danish Code the timber structure has to be evaluated with respect to the following criteria where at least one shall...... to criteria a) and b) the timber frame structure has one column with a reliability index a bit lower than an assumed target level. By removal three columns one by one no significant extensive failure of the entire structure or significant parts of it are obatined. Therefore the structure can be considered......A probabilistic based robustness analysis has been performed for a glulam frame structure supporting the roof over the main court in a Norwegian sports centre. The robustness analysis is based on the framework for robustness analysis introduced in the Danish Code of Practice for the Safety...

36 CFR 223.195 - Procedures for identifying and marking unprocessed timber.

Science.gov (United States)

2010-07-01

... procedures required herein. (f) Waiver of branding requirements. Regional Foresters may waive the branding... individual timber sale basis, all or a portion of the branding requirements pursuant to paragraph (c)(2) of...) Regions 5 and 6. On an individual timber sale basis, the branding requirement pursuant to paragraph (c)(2...

Timber resources of Ohio

Science.gov (United States)

Neal P. Kingsley; Carl E. Mayer

1970-01-01

Under the authority of the McSweeney-McNary Forest Research Act of May 22, 1928, and subsequent amendments, the Forest Service, U. S. Department of Agriculture, conducts a series of continuing forest surveys of all states to provide up-to-date information about the forest resources of the Nation. A resurvey of the timber resources of Ohio was made in 1966 and 1967 by...

Development of a smart timber bridge girder with fiber optic sensors

Science.gov (United States)

James Wacker; Ursula Deza; Brent M. Phares; Terry J. Wipf

2010-01-01

Past timber bridge evaluation and maintenance efforts in the USA have principally focused on the internal integrity of timber components using various non-destructive evaluation tools to supplement visual inspection data. This project is part of a comprehensive effort to develop smart structure concepts for improving the long-term performance, maintenance, and...

Timber Curtain: Designing with material capabilities

DEFF Research Database (Denmark)

Lahmy, Maya; Larsen, Niels Martin

2015-01-01

of the generative phase to fabrication of the artefact. Brought together by various conceptual and structural elements the Timber Curtain forms a 4.5 x 2.5 x 0.5 m construct of assembled wood components, digitally crafted through advanced production techniques. Concerned with materiality and processing of the wood......Timber Curtain explores relations between digital precision and material indeterminacy. It is an installation engaging spatially through its presence as a 1:1 architectural component as well as it is exploring novel technologies in the architectural design process from the very beginning...... an associative digital model that could gather and compute in put from material behaviour and out put manufacturing data was scripted. This method enables material capacity to be pushed to the limit of its performance allowing novel sensuous and structural qualities to emerge. The method is developed with use...

Characteristics of Timbers Dried Using Kiln Drying and Radio Frequency-Vacuum Drying Systems

OpenAIRE

Rabidin Zairul Amin; Seng Gan Kee; Wahab Mohd Jamil Abdul

2017-01-01

Heavy hardwoods are difficult-to-dry timbers as they are prone to checking and internal stresses when dried using a conventional kiln drying system. These timbers are usually dried naturally to reach 15% to 19% moisture content with an acceptable defects. Besides long drying time, timbers at these moisture contents are not suitable for indoor applications since they will further dry and causing, for example, jointing and lamination failures. Drying to a lower moisture content could only be ac...

Market of innovative timber products in Europe and Serbia and their contribution to climate change mitigation

Directory of Open Access Journals (Sweden)

Sretenović Predrag

2014-01-01

Full Text Available The paper shows results of researching the market of glued laminated timber as the most frequent innovative timber product in constructing timber framed residential facilities in Europe and Serbia. The research included the development of production, consumption and trade flows for the most significant countries in the European Union and Serbia. Additionally, the paper gives characteristics of this innovative timber product regarding dimensions, allowed deviations of dimensions defined in adequate European standard, wood species it is made of and fire resistance. The last part of the paper shows results of econometric modeling of the impact of building timber-framed houses on the consumption of glued laminated timber in Austria as one of the countries belonging to the group of the largest consumers of this innovative timber product in Europe. Taking into consideration that the substitution of classic building materials, primarily concrete, steel and aluminum, with glued laminated timber in residential construction contributes to the reduction of carbon-dioxide emission and climate change mitigation, research results of the effects of such substitution are presented in the last chapter in this paper. [Projekat Ministarstva nauke Republike Srbije, br. III43007: Istraživanje klimatskih promena na životnu sredinu: praćenje uticaja, adaptacija i ublažavanje

Dowel-type fastener connections in timber structures subjected to short-term loading

DEFF Research Database (Denmark)

Lauritzen Jensen, J.

Design of dowel-type fastener connections in framed timber structures usually involves a two-step analysis: determination of the distribution of the sectional forces, and design of the eccentrically loaded connections. This report presents an integrated model for design of framed timber structures...

Cut and Run: Illegal Logging and Timber Trade in the Tropics | IDRC ...

International Development Research Centre (IDRC) Digital Library (Canada)

Illegal logging and trade in timber is a major cause of forest degradation in the world ... But controlling this global problem is not a simple matter of enacting new laws ... practices in the logging industry and timber trade of four tropical countries.

Service life assessment of timber highway bridges in USA climate zones

Science.gov (United States)

James P. Wacker; Brian K. Brashaw; Thomas G. Williamson; P. David Jones; Matthew S. Smith; Travis K. Hosteng; David L. Strahl; Lola E. Coombe; V.J. Gopu

2014-01-01

As engineers begin to estimate life-cycle costs and sustainable design approaches for timber bridges, there is a need for more reliable data about their durability and expected service life. This paper summarizes a comprehensive effort to assess the current condition of more than one hundred timber highway bridge superstructures throughout the United States. This...

Timber bridge evaluation : a global nondestructive approach using impact generated FRFs

Science.gov (United States)

Angus Morison; C.D. Van Karsen; H.A. Evensen; J.B. Ligon; J.R. Erickson; R.J. Ross; J.W. Forsman

2002-01-01

Bridges require periodic inspections to ensure the safety of those using the structure. A visual inspection has historically been the most common form of investigation for timber bridges. This poses many problems when inspecting bridge timbers since often the damage is internal, leaving no visible signs of decay on the surface. Localized nondestructive evaluation (NDE...

Time-of-Flight Adjustment Procedure for Acoustic Measurements in Structural Timber

Science.gov (United States)

Danbiel F. Llana; Guillermo Iñiguez-Gonzalez; Francisco Arriaga; Xiping Wang

2016-01-01

The effect of timber length on time-of-flight acoustic longitudinal measurements was investigated on the structural timber of four Spanish species: radiata pine (Pinus radiata D. Don), Scots pine (Pinus sylvestris L.), laricio pine (Pinus nigra Arn.), and maritime pine (Pinus pinaster Ait.). Time-of-flight longitudinal measurements were conducted on 120 specimens of...

Standard plans for timber bridge superstructures

Science.gov (United States)

James P. Wacker; Matthew S. Smith

2001-01-01

These standardized bridge plans are for superstructures consisting of treated timber. Seven superstructure types are includes: five longitudinal and two transverse deck systems. Both HS520 and HS25 loadings are included, along with L/360 and L/500 deflection criteria.

Multi-objective room acoustic optimization of timber folded plate structure

DEFF Research Database (Denmark)

Skov, Rasmus; Parigi, Dario; Damkilde, Lars

2017-01-01

This paper investigates the application of multi-objective optimization in the design of timber folded plate structures in the scope of the architectural design process. Considering contrasting objectives of structural displacement, early decay time (EDT), clarity (C50) and sound strength (G......), the methodology applied in two benchmarks tests, encompasses both structural and acoustic performance when determining folding characteristics and directionality of surfaces in a timber folded plate structure....

Edge effects and the effective size of old-growth coast redwood preserves

Science.gov (United States)

William H. Russell; Joe R. McBride; Ky Carnell

2000-01-01

Data were collected to determine the depth of influence of conditions created by clear-cut timber harvest on adjacent old-growth stands of coast redwood. Fourteen variables related to stand structure and composition, wildlife habitat, and physical environment exhibited significant correlation to distance from the timber harvest boundary. Results were applied to the...

Traditional and formal ecological knowledge to assess harvesting and conservation of a Mexican Tropical Dry Forest.

Science.gov (United States)

Monroy-Ortiz, Columba; García-Moya, Edmundo; Romero-Manzanares, Angélica; Luna-Cavazos, Mario; Monroy, Rafael

2018-05-15

This research integrates Traditional and Formal Ecological Knowledge (TEK / FEK) of a Tropical Dry Forest in central Mexico, in order to assess harvesting and conservation of the non-timber forest species. We were interested in: knowing the structure and diversity of the forest community; identifying which are the tree resources of common interest to the users through participatory workshops. A further interest was to identify those resources which are important to local people in terms of preservation; explaining the relationship of the species with some environmental factors; and visualizing which management practices endanger or facilitate the conservation of species. Studied areas were defined and labelled on a map drawn by local informants, where they indicated those plant species of common interest for preservation. Ethnobotanical techniques were used to reveal the TEK and assess harvesting and conservation of the species. With the FEK through community and population ecology, we detected the importance of five environmental factors, obtained various ecological indicators of the vegetation, and studied the population structure of the relevant species. The FEK was analyzed using descriptive and multivariate statistics. As a result, low density and small basal area of trees were registered. Species richness and diversity index were similar to other natural protected areas in Mexico. Tree species harvested shown an asymmetric distribution of diameters. Harvesting, elevation, and accessibility were the most influential factors on tree density. FEK demonstrated that TEK is helpful for the assessment of forest harvesting. Ecological analysis complemented the local knowledge detecting that Lysiloma tergemina is a species non-identified for the people as interesting, although we discover that it is a threatened species by over-harvesting. Haematoxylum brasiletto was identified as important for conservation due to its scarcity and medicinal use. Our results advanced

Probabilistic Modeling of Graded Timber Material Properties

DEFF Research Database (Denmark)

Faber, M. H.; Köhler, J.; Sørensen, John Dalsgaard

2004-01-01

The probabilistic modeling of timber material characteristics is considered with special emphasis to the modeling of the effect of different quality control and selection procedures used as means for quality grading in the production line. It is shown how statistical models may be established...... on the basis of the same type of information which is normally collected as a part of the quality control procedures and furthermore, how the efficiency of different control procedures may be quantified and compared. The tail behavior of the probability distributions of timber material characteristics plays...... such that they may readily be applied in structural reliability analysis and their format appears to be appropriate for codification purposes of quality control and selection for grading procedures....

Timber designers' manual

CERN Document Server

Ozelton, E C

2008-01-01

This major reference manual covers both overall and detail design of structural timber, including aspects such as shear deflection, creep, dynamic and lateral stability considerations for flexural members.Available for the first time in paperback, the Third Edition was substantially revised to take account of the many changes since the previous edition was published in 1984. It is based on British Standard BS 5268-2: 2002, which brought design concepts closer to European practice and Eurocode 5.Features of the Third Edition include:* information on bolt values including

Wind energy harvesting with a piezoelectric harvester

International Nuclear Information System (INIS)

Wu, Nan; Wang, Quan; Xie, Xiangdong

2013-01-01

An energy harvester comprising a cantilever attached to piezoelectric patches and a proof mass is developed for wind energy harvesting, from a cross wind-induced vibration of the cantilever, by the electromechanical coupling effect of piezoelectric materials. The vibration of the cantilever under the cross wind is induced by the air pressure owing to a vortex shedding phenomenon that occurs on the leeward side of the cantilever. To describe the energy harvesting process, a theoretical model considering the cross wind-induced vibration on the piezoelectric coupled cantilever energy harvester is developed, to calculate the charge and the voltage from the harvester. The influences of the length and location of the piezoelectric patches as well as the proof mass on the generated electric power are investigated. Results show that the total generated electric power can be as high as 2 W when the resonant frequency of the cantilever harvester is close to the vortex shedding frequency. Moreover, a value of total generated electric power up to 1.02 W can be practically realized for a cross wind with a variable wind velocity of 9–10 m s −1 by a harvester with a length of 1.2 m. This research facilitates an effective and compact wind energy harvesting device. (paper)

Parametric Evaluation of Racking Performance of Platform Timber Framed Walls

OpenAIRE

Dhonju, R..; D’Amico, B..; Kermani, A..; Porteous, J..; Zhang, B..

2017-01-01

This paper provides a quantitative assessment of the racking performance of partially anchored timber framed walls, based on experimental tests. A total of 17 timber framed wall specimens, constructed from a combination of materials under different load configurations, were tested. The experimental study was designed toexamine the influence of a range of geometrical parameters, such as fastener size and spacings, wall length, arrangement of studs and horizontal members, as well as the effect ...

Assessing effects of changing land use practices on sediment loads in Panther Creek, north coastal California

Science.gov (United States)

Mary Ann Madej; Greg Bundros; Randy Klein

2012-01-01

Revisions to the California Forest Practice Rules since 1974 were intended to increase protection of water quality in streams draining timber harvest areas. The effects of improved timber harvesting methods and road designs on sediment loading are assessed for the Panther Creek basin, a 15.4 km2 watershed in Humboldt County, north coastal...

A review of best management practices and the mitigation of stream-breeding salamanders in the eastern deciduous forest

Science.gov (United States)

Thomas A. Maigret; John J. Cox

2014-01-01

Timber harvest has been implicated as a causative factor in the decline of amphibian populations and diversity in many areas of the world. The adoption of best management practices (BMPs) is intended to minimize the impacts of timber harvest on the biotic community, including amphibians and their habitat requirements. Herein, we synthesize the current scientific...

Flat Branch monitoring project: stream water temperature and sediment responses to forest cutting in the riparian zone

Science.gov (United States)

Barton D. Clinton; James M. Vose; Dick L. Fowler

2010-01-01

Stream water protection during timber-harvesting activities is of primary interest to forest managers. In this study, we examine the potential impacts of riparian zone tree cutting on water temperature and total suspended solids. We monitored stream water temperature and total suspended solids before and after timber harvesting along a second-order tributary of the...

Timber resource statistics for Oregon.

Science.gov (United States)

Sally Campbell; Paul Dunham; David. Azuma

2004-01-01

This report is a summary of timber resource statistics for all ownerships in Oregon. Data were collected as part of several statewide multiresource inventories, including those conducted by the Pacific Northwest Region (Region 6) on National Forest System lands in Oregon, by the Bureau of Land Management (BLM) on BLM lands in western Oregon, and by the Pacific...

Evaluation of recycled timber members

Science.gov (United States)

Douglas R. Rammer

1999-01-01

An experimental study was conducted to evaluate the residual shear capacity of large Douglas-fir timbers used in a military facility in Ardeen Hills, MN. A S-point and 4-point bending test was used to determine the effects of checks and splits on the shear strength capacity. Experimental results are compared to past shear and flexural studies.

Timber management opportunities in Pennsylvania

Science.gov (United States)

Henry H. Webster

1960-01-01

The Pennsylvania Department of Forests and Waters serves the people in managing state forest lands and in helping private owners manage their forest lands. To produce more timber from Pennsylvania forests, the Department applies many different forestry practices. But the more effort it spends in one direction, the less it can spend in others. So the Department must...

Harvesting techniques for energy wood of forest owners; Metsaenomistajien energiapuun korjuutekniikat

Energy Technology Data Exchange (ETDEWEB)

Ryynaenen, S. [Work Efficiency Inst., Rajamaeki (Finland)] Ihonen, M. [Work Efficiency Inst., Helsinki (Finland)

1997-12-01

The aim of the project is to develop harvesting techniques and methods for small-wood and logging residues, suitable for use by forest owners and small-scale entrepreneurs. Examples of such methods are piling of logging residues at site and forest transport with farm tractors. The project is carried out by field experiments with new machines and methods and by work-studies at sites in practice. A cost-accounting model for firewood production will also be revised. The work study of the harvesting method of first- thinning wood and energy wood based on the use of SykeNaarva logging equipment was carried out as part of chips supply to Perho Energy Co-operative. The productivity of logging was in practice significantly higher than in previous field tests with the prototype equipment. The costs were lower than in manual logging. Field experiments were also carried out with manual logging with a chain saw equipped with felling grips (Reo-Tuote Ky). Operation experiments with a chain-limbing device for farm tractors (Eskon Paja Oy), related to product development, were also carried out. A literature study, specialist interviews and field experiments were carried out on the transports of logging residues with farm factors. A four-drive tractor equipped with a timber loader and a trailer is suited technically for this work. Productivity is reduced by slow loading and in particular by a small load size when operating with the basic fleet. The costs are reduced by small capital costs and by rapid transports between the sites. To improve the economy of harvesting logging residues, inexpensive technical solutions were studied for farm tractors in co-operation with engineering works

A view from the top: US enrichment Corp.'s William H. Timbers, Jr

International Nuclear Information System (INIS)

Giltenan, E.

1993-01-01

Nick Timbers took over as the first Transition Manager of the US Enrichment Corporation upon its founding last July 1st. Although USEC is not involved in negotiating the HEU deal, the fledgling company will be in charge of actually buying and selling the resulting LEU. Whenever the deal is finally signed. After the politics and haggling are over, it will be up to Nick Timbers to make the deal work on the global uranium market. The view from USEC is resolute. No matter what shape the final HEU deal takes, Nick Timbers promises that USEC will remain a competitive supplier of enrichment services. Timbers pledges that any extra costs associated with the HEU deal will not be passed on to customers. He took time out from his recent busy schedule to share his thoughts on HEU and its aftermath

Determining average yarding distance.

Science.gov (United States)

Roger H. Twito; Charles N. Mann

1979-01-01

Emphasis on environmental and esthetic quality in timber harvesting has brought about increased use of complex boundaries of cutting units and a consequent need for a rapid and accurate method of determining the average yarding distance and area of these units. These values, needed for evaluation of road and landing locations in planning timber harvests, are easily and...

Summary of watershed conditions in the vicinity of Redwood National Park, California

Science.gov (United States)

Janda, Richard J.

1977-01-01

The Redwood Creek Unit of Redwood National Park is located in the downstream end of an exceptionally rapidly eroding drainage basin. Spatial distribution and types of erosional landforms, observed in the field and on time-sequential aerial photographs, measured sediment loads, and the lithologic heterogeneity of streambed materials indicated (1) that sediment discharges reflect a complex suite of natural and man-induced mass movement and fluvial erosion processes operating on a geologically heterogeneous, naturally unstable terrain, and (2) that although infrequent exceptionally intense storms control the timing and general magnitude of major erosion events, the loci, types, and amounts of erosion occurring during those events are substantially influence by land use. Erosional impacts of past timber harvest in the Redwood Creek basin reflect primarily the cumulative impact of many small erosion problems caused not so much by removal. Recently modified riparian and aquatic environments reflect stream channel adjustments to recently increased water and sediment discharges, and are classified by the National Park Service as damaged resources because the modifications reflect, in part, unnatural causes. Newly strengthened State regulations and cooperative review procedures result in proposed timber harvest plans being tailored to specific site conditions, as well as smaller, more dispersed harvest units and more sophisticated attempts at minimizing ground-surface disruption than those used in most previous timber harvesting in this basin. However, application of improved timber harvest technology alone will not assure protection of park resources. Much remaining intact residual commercial old-growth timber is on hillslopes that are steeper, wetter, more susceptible to landsliding, and more nearly adjacent to major stream channels than most of the previously harvested hillslopes in the lower Redwood Creek basin. Moreover, natural debris barriers along streams flowing

Reliability based Robustness of Timber Structures through NDT Data Updating

DEFF Research Database (Denmark)

Sousa, Hélder S.; Sørensen, John Dalsgaard; Kirkegaard, Poul Henning

2011-01-01

This work presents a framework for reliability-based assessment of timber structures / members using data gathered from non-destructive test results. These results are used for modeling an update of the mechanical characteristics of timber, using Bayesian methods. Results gathered from ultrasound...... of the structure, thus, being possible to evaluate reliability based in time dependent factors, as well to categorize that structure in terms of robustness. For exemplification of the underlined concepts, three different types of structures are studied....

Friction welding of wood – A fast, adhesive-free bonding technology for prefabricated elements in timber construction

OpenAIRE

Hahn, Benjamin; Hatt, Fred

2013-01-01

Up to now chemical adhesives based on polyurethane are used for the assembling of timber planks to large-scale structural elements, in particular cross-laminated timber panels (CLT), which opened new possibilities for architects and engineers in timber construction. The use of these adhesives still implicates, beside others, concerns about their impact on health and environment during application as well for later disposal. In order to overcome the geometrical limitations of timber by maintai...

Silver mirror reaction as an approach to construct a durable, robust superhydrophobic surface of bamboo timber with high conductivity

Energy Technology Data Exchange (ETDEWEB)

Jin, Chunde; Li, Jingpeng [School of Engineering, Zhejiang Agricultural and Forestry University, Lin’an 311300 (China); Key Laboratory of Wood Science and Technology, Zhejiang Province (China); Han, Shenjie; Wang, Jin; Yao, Qiufang [School of Engineering, Zhejiang Agricultural and Forestry University, Lin’an 311300 (China); Sun, Qingfeng, E-mail: zafuqfsun@163.com [School of Engineering, Zhejiang Agricultural and Forestry University, Lin’an 311300 (China); Key Laboratory of Wood Science and Technology, Zhejiang Province (China)

2015-06-25

Highlights: • Ag NPs were deposited onto the surface of bamboo timber by silver mirror reaction. • The Ag NPs made the intrinsic insulating bamboo timber have a high conductivity. • The modified surfaces displayed superhydrophobicity even for corrosive solutions. - Abstract: Silver nanoparticles (Ag NPs) were successfully in situ deposited onto the surface of the bamboo timber through a simple silver mirror reaction. Scanning electron microscopy (SEM) images showed that the surface of the bamboo timber was densely covered with the uniform Ag NPs, which made the intrinsic insulating bamboo timber conductive. With further modification by fluoroalkylsilane (FAS), the Ag NPs-covered bamboo timber showed superhydrophobicity with the water contact angle (WCA) of 155°. Simultaneously, the modified bamboo timber displayed a durable and robust superhydrophobic property even under corrosive solutions including acidic, alkali and NaCl solutions with different molar concentrations. Especially in harsh conditions of boiling water or intense water stirring, the modified bamboo timber remained superhydrophobicity and high conductivity.

Robustness Assessment of Spatial Timber Structures

DEFF Research Database (Denmark)

Kirkegaard, Poul Henning

2012-01-01

Robustness of structural systems has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. In order to minimise the likelihood of such disproportionate structural failures many modern buildi...... to robustness of spatial timber structures and will discuss the consequences of such robustness issues related to the future development of timber structures.......Robustness of structural systems has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. In order to minimise the likelihood of such disproportionate structural failures many modern building...... codes consider the need for robustness of structures and provide strategies and methods to obtain robustness. Therefore a structural engineer may take necessary steps to design robust structures that are insensitive to accidental circumstances. The present paper summaries issues with respect...

Historic timber roof structures

OpenAIRE

Magina, Miguel Jorge

2013-01-01

Dissertação para obtenção do Grau de Mestre em Engenharia Civil – Estruturas e Geotecnia This dissertation covers the study of historic timber roof structures in Transylvania area - Romania, the structures type, its elements and connection variety between them. Procedures to study a structure of this category are approached. It is also referred semi and non-destructive tests that can be done to better understand the present wood characteristics, and potential reparation or strengthening...

SOFRA and RPA: two views of the future of southern timber supply.

Science.gov (United States)

Darius Adams; John Mills; Ralph Alig; Richard. Haynes

2005-01-01

Two recent studies provide alternative views of the current state and future prospects of southern forests and timber supply: the Southern Forest Resource Assessment (SOFRA) and the Fifth Resources Planning Act Timber Assessment (RPA). Using apparently comparable data but different models and methods, the studies portray futures that in some aspects are quite similar...

Temporal dynamics of flooding, evaporation, and desiccation cycles and observations of salt crust area change at the Bonneville Salt Flats, Utah

Science.gov (United States)

Bowen, Brenda B.; Kipnis, Evan L.; Raming, Logan W.

2017-12-01

The Bonneville Salt Flats (BSF) in Utah is a dynamic saline playa environment responding to natural and anthropogenic forces. Over the last century, the saline groundwater from below BSF has been harvested to produce potash via evaporative mining, mostly used as agricultural fertilizers, while the surface halite crust has provided a significant recreational site for land speed racing. Perceptions of changes in the salt crust through time have spurred debates about land use and management; however, little is known about the timescales of natural change as the salt crust responds to climatic parameters that drive flooding, evaporation, and desiccation (FED) cycles that control surface salt growth and dissolution. Climate data over the last 30 years are examined to identify annual patterns in surface water balance at BSF to identify annual and seasonal climate constraints on FED cycles. Landsat satellite data from 1986 to the present are used to map the areal extent of the surface halite salt crust at BSF at the end of the desiccation season (between August 15 and October 30) annually. Overall, the observed area of the desiccation-stage BSF halite crust has varied from a maximum of 156 km2 in 1993 to a minimum of 72 km2 in 2014 with an overall trend of declining area of halite observed over the 30 years of analysis. Climatic variables that influence FED cycles and seasonal salt dissolution and precipitation have also varied through this time period; however, the relationship between surface water fluxes and salt crust area do not clearly correlate, suggesting that other processes are influencing the extent of the salt. Intra-annual analyses of salt area and weather illustrate the importance of ponded surface water, wind events, and microtopography in shaping a laterally extensive but thin and ephemeral halite crust. Examination of annual to decadal changes in salt crust extent and environmental parameters at BSF provides insights into the processes driving change and

On the use of NDT Data for Reliability-Based Assessment of Existing Timber Structures

DEFF Research Database (Denmark)

Sousa, Hélder S.; Sørensen, John Dalsgaard; Kirkegaard, Poul Henning

2013-01-01

The objective of this paper is to address the possibilities of using non-destructive testing (NDT) data for updating information and obtaining adequate characterization of the reliability level of existing timber structures and, also, for assessing the evolution in time of performance...... of these structures when exposed to deterioration. By improving the knowledge upon the mechanical properties of timber, better and more substantiated decisions after a reliability safety assessment are aimed at. Bayesian methods are used to update the mechanical properties of timber and reliability assessment......, and information of NDT is also used to calibrate these models. The proposed approach is used for reliability assessment of different structural timber systems. Reliability of the structural system is assessed regarding the failure consequences of individual elements defined as key elements which were determined...

Theory of timber connections with slender dowel type fasteners

DEFF Research Database (Denmark)

Svensson, Staffan; Munch-Andersen, Jørgen

2018-01-01

A theory on the lateral load-carrying capacity of timber connections with slender fasteners is presented. The base of the theory is the coupled mechanical phenomena acting in the connection, while the wood and the slender fastener deform and yield prior to failure. The objective is to derive...... a sufficient description of actions and responses which have determining influence on the load-carrying capacity of timber connections with slender fasteners. Model assumptions are discussed and made, but simplifications are left out. Even so, simple mathematical equations describing the lateral capacity......-carrying capacity of the tested connections....

Oxalic acid as an assisting agent for the electrodialytic remediation of chromated copper arsenate treated timber waste

DEFF Research Database (Denmark)

Ribeiro, Alexandra B.; Mateus, Eduardo P.; Ottosen, Lisbeth M.

1999-01-01

The electrodialytic process is proposed as a technique for the remediation of chromated copper arsenate treated timber waste, using oxalic acid as assisting agent. The method prowed succesfull 93% Cu, 95% Cr and 99% As was removed from the timber.......The electrodialytic process is proposed as a technique for the remediation of chromated copper arsenate treated timber waste, using oxalic acid as assisting agent. The method prowed succesfull 93% Cu, 95% Cr and 99% As was removed from the timber....

Strategies for Sustainable Development of Non-Timber Forest Products in Senegal

OpenAIRE

Sene, Abdou

2001-01-01

In recent years, forests have been increasingly recognized as rich reservoirs for many valuable biological resources. As a result of the devastation caused by drought, clearing land for agriculture, and overexploitation of timber, there has been a growing interest in non-timber forest products (NTFPs). The Senegal Forestry Action Plan, designed to ensure sustainable forest management, stresses the importance of identifying the constraints to and opportunities for sustainable development of no...

The effects of population growth on timber management and inventories in Virginia

Science.gov (United States)

David N. Wear; Rei Liu; J. Michael Foreman; Raymond M. Sheffield

1999-01-01

Expanding human populations may have important effects on the availability of timber from private lands in the South. To examine the effects of development on timber supply, the authors compared the density of populations and various site variables with expert opinions on the future location of commercial timberland for a study site in Virginia. Population density is a...

Timber resource statistics for the San Joaquin and southern California resource areas.

Science.gov (United States)

Bruce Hiserote; Joel Moen; Charles L. Bolsinger

1986-01-01

This report is one of five that provide timber resource statistics for 57 of the 58 counties in California (San Francisco is excluded). This report presents statistics from a 1982-84 inventory of the timber resources of Alpine, Amador, Calaveras, Fresno, Imperial, Inyo, Kern, Kings, Los Angeles, Madera, Mariposa, Merced, Mono, Orange, Riverside, San Bernardino, San...

Dynamic programming for optimization of timber production and grazing in ponderosa pine

Science.gov (United States)

Kurt H. Riitters; J. Douglas Brodie; David W. Hann

1982-01-01

Dynamic programming procedures are presented for optimizing thinning and rotation of even-aged ponderosa pine by using the four descriptors: age, basal area, number of trees, and time since thinning. Because both timber yield and grazing yield are functions of stand density, the two outputs-forage and timber-can both be optimized. The soil expectation values for single...

Structural attributes of two old-growth Cross Timbers stands in western Arkansas

Science.gov (United States)

Don C. Bragg; David W. Stahle; K. Chris Cerny

2012-01-01

Comprised of largely non-commercial, xeric, oak-dominated forests, the Cross Timbers in Arkansas have been heavily altered over the last two centuries, and thus only scattered parcels of old-growth timber remain. We inventoried and mapped two such stands on Fort Chaffee Military Training Center in Sebastian County, Arkansas. The west-facing Christmas Knob site is...

Nondestructive assessment of single-span timber bridges using a vibration- based method

Science.gov (United States)

Xiping Wang; James P. Wacker; Angus M. Morison; John W. Forsman; John R. Erickson; Robert J. Ross

2005-01-01

This paper describes an effort to develop a global dynamic testing technique for evaluating the overall stiffness of timber bridge superstructures. A forced vibration method was used to measure the natural frequency of single-span timber bridges in the laboratory and field. An analytical model based on simple beam theory was proposed to represent the relationship...

Laboratory investigation of fire protection coatings for creosote-treated timber railroad bridges

Science.gov (United States)

Carol A. Clausen; Robert H. White; James P. Wacker; Stan T. Lebow; Mark A. Dietenberger; Samuel L. Zelinka; Nicole M. Stark

2014-01-01

As the incidence of timber railroad bridge fires increases, so has the need to develop protective measures to reduce the risk from accidental ignitions primarily caused by hot metal objects. Of the six barrier treatments evaluated in the laboratory for their ability to protect timbers from fires sourced with ignition from hot metal objects only one intumescent coating...

77 FR 2508 - Rogue River-Siskiyou National Forest, Powers Ranger District, Coos County, OR; Eden Ridge Timber...

Science.gov (United States)

2012-01-18

... Plan, page C-39). Specifically for the Eden Ridge Timber Sales project, Needs include: Improvement of... District, Coos County, OR; Eden Ridge Timber Sales AGENCY: Forest Service, USDA. ACTION: Corrected Notice of Intent to prepare an environmental impact statement for the Eden Ridge Timber Sales. The original...

Statistical Analysis of Data for Timber Strengths

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard; Hoffmeyer, P.

Statistical analyses are performed for material strength parameters from approximately 6700 specimens of structural timber. Non-parametric statistical analyses and fits to the following distributions types have been investigated: Normal, Lognormal, 2 parameter Weibull and 3-parameter Weibull...

Splitting behaviour of timber loaded perpendicular to the grain by punched metal plates

NARCIS (Netherlands)

Schoenmakers, J.C.M.; Jorissen, A.J.M.; Leijten, A.J.M.; Aratake, S. xx

2008-01-01

Nowadays, prefabricated timber trusses are widely used as load-bearing roof structures. The majority of these trusses are produced with punched metal plates (PMP) to connect two or more timber elements of the same thickness, see Figure 2. In these structures sufficient overlap is required to prevent

Framework for Robustness Assessment of Timber Structures

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard

2011-01-01

This paper presents a theoretical framework for the design and analysis of robustness of timber structures. This is actualized by a more4 frequent use of advanced types of timber structures with limited redundancy and serious consequences in the case of failure. Combined with increased requirements...... to efficiency in design and execution followed by increased risk of human errors has made the need of requirements to robustness of new structures essential. Further, the collapse of the Ballerup Super Arena, the bad Reichenhall Ice-Arena and a number of other structural systems during the last 10 years has...... increased the interest in robustness. Typically, modern structural design codes require that ‘the consequence of damages to structures should not be disproportional to the causes of the damages’. However, although the importance of robustness for structural design is widely recognized, the code requirements...

Self-extinguishment of cross-laminated timber

NARCIS (Netherlands)

Crielaard, R.; van de Kuilen, J.W.G.; Terwel, K.C.; Ravenshorst, G.J.P.; Steenbakkers, P.; Breunesse, A.

2016-01-01

Cross-laminated timber, or CLT, is receiving attention for its potential use in tall buildings. As a combustible material, one of the challenges for the construction of these buildings is the fire risk that results from its use in the structure. Unprotected CLT can burn along with the fuel load

Nest-site selection by cavity-nesting birds in relation to postfire salvage logging

Science.gov (United States)

Victoria A. Saab; Robin E. Russell; Jonathan G. Dudley

2009-01-01

Large wildfire events in coniferous forests of the western United States are often followed by postfire timber harvest. The long-term impacts of postfire timber harvest on fire-associated cavity-nesting bird species are not well documented. We studied nest-site selection by cavity-nesting birds over a 10-year period (1994-2003), representing 1-11 years after fire, on...

Understanding Loss Deductions for Timber

Science.gov (United States)

John Greene; Michael Jacobson

1998-01-01

Forestland owners whose timber has been destroyed may be eligible to take a deduction for the loss on their federal income tax. The loss must be physical in nature and caused by an identifiable event or combination of events that has run its course. There are two types of losses from natural events. Casualty losses are sudden, unexpected, and unusual - as from a fire...

Field performance of timber bridges. 7, Connell Lake stress-laminated deck bridge

Science.gov (United States)

L. E. Hislop; M. A. Ritter

The Connell Lake bridge was constructed in early 1991 on the Tongass National Forest, Alaska, as a demonstration bridge under the Timber Bridge Initiative. The bridge is a stress-laminated deck structure with an approximate 36-ft length and 18-ft width and is the first known stress-laminated timber bridge constructed in Alaska. Performance of the bridge was monitored...

Space-time modeling of timber prices

Science.gov (United States)

Mo Zhou; Joseph Buongriorno

2006-01-01

A space-time econometric model was developed for pine sawtimber timber prices of 21 geographically contiguous regions in the southern United States. The correlations between prices in neighboring regions helped predict future prices. The impulse response analysis showed that although southern pine sawtimber markets were not globally integrated, local supply and demand...

Velocity and uniformity of air circulation in conventional kilns for sawn timber

Directory of Open Access Journals (Sweden)

Kolin Branko

2012-01-01

Full Text Available This paper presents the results of a research of velocity of air circulation in the conventional kiln drying of sawn timber and its influence on the uniformity of final moisture content. The data showed that the air velocity (between 0.8 - 1.2 m•s -1 is significantly lower than the one that is optimal for timber drying of coniferous species (3 - 4 m•s-1. This results in a reduction in the capacity of installations for drying, increased energy (thermal and electrical consumption and thereby increase in the cost of drying. The correlation between the speed of air circulation and the final MC of timber due to prolonged drying was not established. Recommendations that should eliminate the identified deficiencies are also given.

High-frequency and microwave heating as a pretreatment to kiln drying of hollowed-out timber

International Nuclear Information System (INIS)

Yamada, N.; Okumura, S.; Taniguchi, Y.

2001-01-01

To dry hollowed-out timber without V-shaped drying checks, its inner part should be dried faster than the outer part. The feasibility of high frequency heating and microwave heating as a pretreatment of kiln drying of hollow timber was examined. During high frequency heating, the top and bottom parts of the timber were dried faster than the right and left parts because the central hollow acts as an air-gap. The outer part dried faster than the inner part during microwave heating, probably because of insufficient penetration of microwave energy into the inner part. The uneven heating of hollowed timber was improved by turning the specimen around its axis during high frequency heating and by setting the specimen upright in the microwave oven

Combined effect of salt and drought on boron toxicity in Puccinellia tenuiflora.

Science.gov (United States)

Liu, Chunguang; Dai, Zheng; Xia, Jingye; Chang, Can; Sun, Hongwen

2018-08-15

Boron toxicity is a worldwide problem, usually accompanied by salt (NaCl) and drought. The combined stresses may induce complex toxicity to the plant. The aim of the present study was to investigate how the combined stresses of salt and drought affect B toxicity in plants. Puccinellia tenuiflora seedlings were planted in vermiculite. A three (B) × three (salt) × three (drought) factorial experiment (for a total of 27 treatments) was conducted. After a 30-day cultivation, plants were harvested to determine dry weight and the concentrations of B, Na + , K + , Ca 2+ , and Mg 2+ . Plant growth was inhibited by B toxicity, which was alleviated by salt and drought. B stress enhanced B uptake and transport of the plant, which was inhibited by salt and drought. B stress had a little effect on K + and Na + concentration and caused Ca 2+ and Mg 2+ accumulation in the plant. Salt addition increased Na + concentration and inhibited Ca 2+ and Mg 2+ accumulation. Drought addition inhibited Na + accumulation and enhanced Ca 2+ and Mg 2+ accumulation. The combined stresses of salt and drought had a greater alleviation on the inhibition of dry weight caused by B than individual salt and drought. Besides, the combined stresses of salt and drought also enhanced B uptake and inhibited B transport. The results indicate that salt, drought, and the combined stresses of salt and drought all can alleviate B toxicity in P. tenuiflora, the main mechanism of which is the restriction of B and Na + uptake caused by salt and drought. The combined stresses of salt and drought have a greater effect on B toxicity than individual salt and drought. Copyright © 2018 Elsevier Inc. All rights reserved.

Geology, Burnst Timber Creek, west of fifth meridian, Alberta

Energy Technology Data Exchange (ETDEWEB)

1966-01-01

The Burnt Timber Creek map-area lies in the southern Foothills of Alberta and includes a narrow strip of the Front Range of the Rocky Mts. along its western edge. The area may be divided into 3 principal structural units, underlain from west to east by the McConnell, Burnt Timber, and Fallentimber thrusts, respectively. McConnell thrust underlies the eastern edge of the mountains. Subsidiary folding and faulting are locally evident in the Paleozoic strata above the thrust. Beneath the McConnell thrust, Mesozoic and Paleozoic strata of the Burnt Timber thrust sheet are strongly overturned in the Panther anticline. The axis of this anticline trends northwest. A culmination along it, in the vicinity of Sheep Creek, deforms the McConnel thrust as well. A total of 16 wells have been drilled to date in 4 separate groups. Each group has revealed the presence of gas and 8 of the wells have been capped as potential gas producers. The reservoir rocks are of Mississippian and Devonian age. Shell Panther River No. 1 well (5-19-30-10W5) is remarkable in having tested at about 86% hydrogen sulfide.

Timber resource statistics for all forest land, except national forests, in eastern Oregon.

Science.gov (United States)

Donald R. Gedney; Patricia M. Bassett; Mary A. Mei

1989-01-01

This report summarizes a 1987 timber resource inventory of all forest land, except National Forests, in the 17 counties (Baker, Crook, Deschutes, Gilliam, Grant, Harney, Jefferson, Klamath, Lake, Malheur, Morrow, Sherman, Umatilla, Union, Wallowa, Wasco, and Wheeler Counties) in eastern Oregon. Detailed tables of forest area, timber volume, growth, mortality, and...

36 CFR 223.6 - Cutting and removal of timber in free-use areas.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Cutting and removal of timber... OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER General Provisions § 223.6 Cutting... or designated by forest officers may be cut and removed for personal use for domestic purposes...

Management for Mountain Pine Beetle Outbreak Suppression: Does Relevant Science Support Current Policy?

Directory of Open Access Journals (Sweden)

Diana L. Six

2014-01-01

Full Text Available While the use of timber harvests is generally accepted as an effective approach to controlling bark beetles during outbreaks, in reality there has been a dearth of monitoring to assess outcomes, and failures are often not reported. Additionally, few studies have focused on how these treatments affect forest structure and function over the long term, or our forests’ ability to adapt to climate change. Despite this, there is a widespread belief in the policy arena that timber harvesting is an effective and necessary tool to address beetle infestations. That belief has led to numerous proposals for, and enactment of, significant changes in federal environmental laws to encourage more timber harvests for beetle control. In this review, we use mountain pine beetle as an exemplar to critically evaluate the state of science behind the use of timber harvest treatments for bark beetle suppression during outbreaks. It is our hope that this review will stimulate research to fill important gaps and to help guide the development of policy and management firmly based in science, and thus, more likely to aid in forest conservation, reduce financial waste, and bolster public trust in public agency decision-making and practice.

75 FR 3424 - Endangered and Threatened Wildlife and Plants; 12-Month Finding on a Petition To Remove the...

Science.gov (United States)

2010-01-21

... listing and delisting a species are the same with respect to the international border discreteness test... Protection (CALFIRE) individual Timber Harvest Plans (THP) and Nonindustrial Timber Management Plans (NTMP...

PROPOSAL FOR AN ERGONOMIC CONFORMITY INDEX FOR EVALUATION OF HARVESTERS AND FORWARDERS

Directory of Open Access Journals (Sweden)

Felipe Leitão da Cunha Marzano

2017-11-01

Full Text Available ABSTRACT Context: In mechanized forestry work, the ergonomic conditions of the workplace affects operator's health, performance and productivity. Originality: A comparison of different forest machines becomes complex in case where it is required analysis of several ergonomic factors simultaneously. There are several methods of ergonomic analysis however, a more complete methodology that considers several ergonomic factors and produces an index that represent the ergonomic condition of the machine is needed. Objective: Propose a methodology to determining an Ergonomic Conformity Index to evaluate Harvesters and Forwarders of different brands. Methodology: The ECI was determined initially basing in four relevant ergonomic factors: noise, vibration, thermal environment and air quality. These factors were evaluated utilizing four Harvesters and two Forwarders in eucalyptus timber harvesting operations. For each factor, a score was given according to its compliance with the established parameters. The ECI was obtained from an average of the scores given to each factor. The index ranges from zero to one, so that lower values indicate worse ergonomic conditions. Results: All the analyzed machines had continuous noise between 75.0 and 82.6 dB (A and whole-body vibration between 0.27 and 0.70 m s-2. HV1 and HV2 presented thermal environment in accordance with the established criteria, other machines showed deficiencies in this regard. All the machines presented non-conformities in the air quality, except HV2. The ECI of Harvesters HV1, HV2, HV3 and HV4, were 0.83; 0.88; 0.71; 0.63. The ECI of Forwarders FW1 and FW2 were 0.58 and 0.79. Conclusion: The determination of the ECI allowed an evaluation and comparison between analyzed forest machines. The machine with the higher ECI had only one non-conformity, and it was related to noise inside the cab. The machine that got the lower ECI presented non-conformities for all the factors.

Pocket Checklists of Indonesian timber trees

NARCIS (Netherlands)

Prawira, Soewanda A.; Tantra, I.G.M.; Whitmore, T.C.

1984-01-01

Indonesia as yet does not have a comprehensive account of the forest trees which reach timber size (35 cm dbh = 14 inch or 105 cm gbh = 42 inch). A project has been started in August 1983 by the Botany Section of the Forest Research Institute in Bogor, Indonesia, to prepare pocket checklists of the

Live-load performance evaluation of historic covered timber bridges in the United States

Science.gov (United States)

Junwon Seo; Travis K. Hosteng; Brent M. Phares; James P. Wacker

2015-01-01

The National Historic Covered Bridge Preservation Program (NHCBP), sponsored by the Federal Highway Administration (FHWA), was established to preserve the covered timber bridge structures that were constructed in the early 1800s. Today, many of the approximately 880 covered timber bridges still in existence in the United States are closed to vehicular traffic;...

Compressive capacity perpendicular to grain of fully supported timber beams of Poplar - model comparison

NARCIS (Netherlands)

Leijten, A.J.M.; Haddad, Y.M.

2015-01-01

In timber frame structures, for both residential and multi-storey purposes, timber elements are loaded perpendicular to grain. In the past, structural design code calculations were based on pre-set permissible strength values, applying empirical models with obscure background. Modern ultimate limit

Mexican oaks as a potential non-timber resource for Kombucha beverages

OpenAIRE

Vázquez-Cabral, Blanca D.; Moreno-Jiménez, Martha R.; Rocha-Guzmán, Nuria E.; Gallegos-Infante, José A.; González-Herrera, Silvia M.; Gamboa-Gómez, Claudia I.; González-Laredo, Rubén F.

2016-01-01

Abstract: Oaks (Quercus spp.) are some of the world's most important and abundant trees in nearly all temperate forests of the northern hemisphere. There are two diversity centers for this genus: one is in Southeast Asia, and the other is in Mexico. Studies on the use of oak have mainly highlighted its timber applications. However, its non-timber value is still unappreciated. Ethnobotanical tradition shows infusions from Quercus leaves, alone or in combination with other plants, which have an...

Analysis of the connection of the timber-fiber concrete composite structure

Science.gov (United States)

Holý, Milan; Vráblík, Lukáš; Petřík, Vojtěch

2017-09-01

This paper deals with an implementation of the material parameters of the connection to complex models for analysis of the timber-fiber concrete composite structures. The aim of this article is to present a possible way of idealization of the continuous contact model that approximates the actual behavior of timber-fiber reinforced concrete structures. The presented model of the connection was derived from push-out shear tests. It was approved by use of the nonlinear numerical analysis, that it can be achieved a very good compliance between results of numerical simulations and results of the experiments by a suitable choice of the material parameters of the continuous contact. Finally, an application for an analytical calculation of timber-fiber concrete composite structures is developed for the practical use in engineering praxis. The input material parameters for the analytical model was received using data from experiments.

Probabilistic Robustness Analysis of Timber Structures—Results from EU COST Action E55:WG3

DEFF Research Database (Denmark)

Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

2011-01-01

The present paper outlines results from Working Group 3 (WG3) in the EU COST Action E55—‘Modelling of the performance of timber structures’. The objectives of the project are related to the three main research activities: the identification and modelling of relevant load and environmental exposure...... scenarios, the improvement of knowledge concerning the behaviour of timber structural elements and the development of a generic framework for the assessment of the life-cycle vulnerability and robustness of timber structures....

Development of Hybrid Kiln Drying System with Radio Frequency Heating for the Sugi Heart Timber

OpenAIRE

Piao, Jinji; Fujimoto, Noboru; Yamamoto, Yasushi; Nagata, Soji

2007-01-01

In this study, proper applied stage of the radio-frequency (RF) heating during kiln drying based on the quality concerning the surface checks of the boxed heart timbers was examined. At the stage of the RF heating the moisture contents decreased clearly at the internal parts of timbers. The surface stress of the sugi (Cryptomeria japonica D. Don) boxed heart timber changed into the compression stress by the RF heating in any drying stage. The surface checks increased according to the decrease...

Comparative design of the superstructure of timber bridges, using norm np 005 - 2003 and provisions of european standards

Directory of Open Access Journals (Sweden)

Chiotan Corina

2015-12-01

Full Text Available The norms and standards for design of timber bridges, as well as other structures built from this material, were obsolete, design standards that were used dated from 1978 to 1980. The introduction of European Standards has created a new legislative framework in the field of designing and building timber bridges. Currently the design of such constructions use Norm NP 005-2003 and SR EN 1995-1-1: 2004 Eurocode 5: Design of timber structures. Part 1-1: General. Common rules and rules for buildings, SR EN 1995-2: 2005 Eurocode 5: Design of timber structures. Part 2: Bridges, along with their national annexes. The aim of this paper is to analyze the design of the beams for timber bridges in parallel, using on one hand Norm NP 005 - 2003, and on the other hand provisions of European standards. The design requirements for both norms as well as the results of a case study for a structural element of a timber bridge will be presented.

Harvest Regulations and Implementation Uncertainty in Small Game Harvest Management

Directory of Open Access Journals (Sweden)

Pål F. Moa

2017-09-01

Full Text Available A main challenge in harvest management is to set policies that maximize the probability that management goals are met. While the management cycle includes multiple sources of uncertainty, only some of these has received considerable attention. Currently, there is a large gap in our knowledge about implemention of harvest regulations, and to which extent indirect control methods such as harvest regulations are actually able to regulate harvest in accordance with intended management objectives. In this perspective article, we first summarize and discuss hunting regulations currently used in management of grouse species (Tetraonidae in Europe and North America. Management models suggested for grouse are most often based on proportional harvest or threshold harvest principles. These models are all built on theoretical principles for sustainable harvesting, and provide in the end an estimate on a total allowable catch. However, implementation uncertainty is rarely examined in empirical or theoretical harvest studies, and few general findings have been reported. Nevertheless, circumstantial evidence suggest that many of the most popular regulations are acting depensatory so that harvest bag sizes is more limited in years (or areas where game density is high, contrary to general recommendations. A better understanding of the implementation uncertainty related to harvest regulations is crucial in order to establish sustainable management systems. We suggest that scenario tools like Management System Evaluation (MSE should be more frequently used to examine robustness of currently applied harvest regulations to such implementation uncertainty until more empirical evidence is available.

A cut above: building the market for fair trade timber

Energy Technology Data Exchange (ETDEWEB)

MacQueen, Duncan

2008-02-15

Unlike coffee and cotton, timber has yet to become a fair trade commodity. But now its time has come. Rights over forest resources are increasingly ceded to small-scale community forest enterprises (CFEs), as large-scale industrial logging is now largely discredited in the sustainable development context. The fair trade emphasis on just pricing for poorer producers is exactly what CFEs need as incentive to invest in sustainable forest management — and secure environmental and poverty reduction benefits at one stroke. With fair trade timber, CFEs could boost their entrepreneurial capacity using democratic business models with in-built social and environmental responsibility. The Fair Trade Labelling Organizations International and Forest Stewardship Council are exploring the ways and means through a new partnership, but more is needed. Consumers must be made aware of why paying higher prices is key to creating CFE incentives for sustainable forest management and poverty reduction. Time and money are needed for consumer education and installing fair trade timber in producer country forest policies, market segregation and procurement policies at all levels.

Community Based Ecological Monitoring of Non Timber Forest ...

International Development Research Centre (IDRC) Digital Library (Canada)

Community Based Ecological Monitoring of Non Timber Forest Products in the Nilgiri ... This project will allow Keystone Foundation to design, implement and test a ... traders, forest department officials and other stakeholders in the process.

36 CFR 251.14 - Conditions, rules and regulations to govern exercise of timber rights reserved in conveyance to...

Science.gov (United States)

2010-07-01

... timber products and in locating, constructing and using mills, logging roads, railroads, chutes, landings..., and to young growth or to trees left standing. All survey monuments and witness trees shall be preserved. (3) All trees, timber or timber products of species or sizes not specifically reserved which are...

Robustness Analysis of Typologies of Reciprocal Timber Structures

DEFF Research Database (Denmark)

Kirkegaard, Poul Henning; Parigi, Dario

2013-01-01

to the future development of typologies of reciprocal timber structures. The paper concludes that these kinds of structures can have a potential as long span timber structures in real projects if they are carefully designed with respect to the overall robustness strategies.......Robustness of structural systems has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. In order to minimise the likelihood of such disproportionate structural failures many modern building...... codes consider the need for robustness in structures and provides strategies and methods to obtain robustness. Therefore a structural engineer may take necessary steps to design robust structures that are insensitive to accidental circumstances. The present paper outlines robustness issues related...

Small wind turbines with timber blades for developing countries: Materials choice, development, installation and experiences

DEFF Research Database (Denmark)

Mishnaevsky, Leon; Freere, Peter; Sinha, Rakesh

2011-01-01

The low cost wind turbines with timber blades represent a good solution for the decentralized energy production in off-grid regions of developing countries. This paper summarizes the results of investigations on the mechanical testing and choice of timber for wind blades, testing of different...... of the blades and turbines. It was further demonstrated that the low cost wind turbines with timber blades represent a promising and viable option for the decentralized energy production in developing countries, which also opens new areas for businesses....

Components interaction in timber framed masonry structures subjected to lateral forces

Directory of Open Access Journals (Sweden)

Andreea DUTU

2012-07-01

Full Text Available Structures with timber framed masonry represent a special typology that is frequently found in Europe and other countries of the world. They are traditional buildings, non-engineered, which showed an unexpected redundancy during earthquakes where reinforced concrete buildings (improperly constructed collapsed. In the paper, aspects regarding the interaction between timber elements and masonry are mainly addressed, that were observed both in experimental studies, but also in the in situ seismic behavior of this type of structure during important earthquakes.

Estimating bridge stiffness using a forced-vibration technique for timber bridge health monitoring

Science.gov (United States)

James P. Wacker; Xiping Wang; Brian Brashaw; Robert J. Ross

2006-01-01

This paper describes an effort to refine a global dynamic testing technique for evaluating the overall stiffness of timber bridge superstructures. A forced vibration method was used to measure the frequency response of several simple-span, sawn timber beam (with plank deck) bridges located in St. Louis County, Minnesota. Static load deflections were also measured to...

Influence of Compression Stresses on Timber Potentials of ...

African Journals Online (AJOL)

Eucalyptus camaldulensis Denhn in North-Western Nigeria. *1A. ... further research should be carried out on wood in service to study the peculiarities of timber behaviour under actual .... eastern Nigeria, Neem (Azadirachta indica) was found.

The study of carrying capacity of timber slabs with use the finite elements method

Directory of Open Access Journals (Sweden)

Demeshok Vitalii

2017-01-01

Full Text Available In the article, the results of the study of behavior of timber slab under influence of fire with the standard “time-temperature” curve are presented. The finite element method was used for it. For the calculation we constructed a grid models of timber slabs. As a result of solution of the thermal problem was obtained temperature distribution and the graphs of maximum deflection of timber slabs and its slew rate depending on the time of the test. The obtained graphs allow to obtain data on the occurrence of the limit state of loss of bearing capacity by comparing current values of displacements and velocities with the maximum allowable. Analysis of the graphs shows that the criteria limit state of loss of bearing capacity does not occur. Calculation method of evaluating the fire resistance of timber slabs was developed. For it use database about strain-stress state of this slabs in conditions of influence of the fire.

75 FR 17896 - Submission for OMB Review; Comment Request

Science.gov (United States)

2010-04-08

... techniques or other forms of information technology should be addressed to: Desk Officer for Agriculture....C. 472a (14)(c) (Act) requires timber sale operating plans on timber sales that exceed 2 years in... within 60 days of award of timber sale contracts and annually thereafter until harvest is complete...

Timber resource of Minnesota's Prairie unit, 1977.

Science.gov (United States)

Jerold T. Hahn; W. Brad Smith

1980-01-01

The fourth inventory of Minnesota's Prairie Unit shows that although commercial forest area decreased 31.7% between 1962 and 1977, growing-stock volume increased 22%. This report gives statistical highlights and contains detailed tables of forest area as well as timber volume, growth, mortality, ownership, and use.

Reinforcement of Bolted Timber Joints Using GFRP Sheets in Poplar and Pine Woods

Directory of Open Access Journals (Sweden)

Mehrab Madhoushi

2013-01-01

Full Text Available Failure in timber structures occurs mainly in crucial points such as joints areas. Therefore, the idea of using composite sheets in timber joints has been intro-duced as a method in order to increase the strength and ductility behaviour of timber joints. This research aims to study the behaviour of bolted joints in poplar and pine woods, which are reinforced by two types of GFRP sheets. A single shear bolted joint consisted of 3 timber members whose length and width were 30 cm in length and 5 cm in width. The thickness of each member was 4 cm for internal part and 2 cm for external part. The employed steel bolt was 10 cm in length and 1 cm in diameter. In this respect, one layer of GFRP sheet was used to be bonded to timber members by using epoxy resin and left between the clamps for 24 hours. They were then kept at room temperature for three weeks. Also the effect of adding a wood veneer on the reinforced joints was investigated. The tensile strength of the reinforced and control samples (un-reinforced joints was measured according to ASTM D5652-92 standard. The results show that the reinforced samples have higher tensile strength compared to that of reinforced joints, although it is not statistically signifcant. Also, two types of sheets infuence the joint behaviour as the reinforced joints display more ductility behaviour.

36 CFR 223.193 - Procedures for reporting acquisition and disposition of unprocessed Federal timber.

Science.gov (United States)

2010-07-01

... for the calendar year listing, by company, from whom the timber was acquired; the date of acquisition... certificate stating that: (i) The certifier has read and understands the form; (ii) The certifier is eligible... applicable laws. (b) Transfer of unprocessed National Forest System timber. Each person who transfers to...

Sustainability and Security: Timber Certification in Asia-Pacific Region

Directory of Open Access Journals (Sweden)

Antonina Ivanova

2008-10-01

Full Text Available The expansion of sustainable development initiatives since the 1990’s reflected an emphasis on integrated solutions to economic development, socio-political stability and environmental health in the global community. In the same context the traditional concept of security needed to be open in two directions. First, the notion of security should no longer be applied only to the military realm, but also to the economic, the societal, the environmental, and the political fields. Second, the referent object of the “security” should not be conceptualized solely in terms of the state, but should embrace the individual below the state, and the international system above it. The forests industry timber certification in Asia-Pacific region has been selected as a case study because it is an excellent example to illustrate the links between the sustainable development and the environmental security, including also certain elements of economic security. This article is presenting a critical overview of the forest industry and the status of timber certification globally, with an emphasis on Asia – Pacific countries applying the Systemic Thinking approach. In conclusion, an outlook is presented concerning the future of timber certification and possible impacts on security and sustainable development.

Timber Chips as the Insulation Material for Energy Saving in Prefabricated Offices

Directory of Open Access Journals (Sweden)

Yupeng Wang

2016-06-01

Full Text Available This research demonstrates the feasibility of a roof insulation method for prefabricated offices that uses vinyl packed timber chips to reduce air conditioning loads (hereinafter referred to as AC loads and which also improves indoor thermal comfort. The advantages of the new roof insulation method were revealed through comparing the impacts of four roof types on prefabricated offices. The AC load and indoor thermal comfort (surface temperature and air temperature were evaluated. The disposal of scrap timber discarded from building construction projects is costing money, and is also a waste of natural resources. The assessment of a new roof insulation method with timber chips demonstrates the advanced usage of timber chips, reducing the environmental load in the building construction process. On the other hand, since prefabricated offices have lower thermal storage capacities and are less airtight than RC (reinforced concrete or S (steel structured buildings, the AC load consumption and indoor thermal comfort exacerbation in prefabricated offices is more serious. Especially in summer, a large amount of solar energy absorption from the roof raises the indoor air temperature and significantly increases the cooling load. This research contributes to the environmental design for prefabricated offices, and develops a method for the reuse of wood chips.

Hinged roof timber

Energy Technology Data Exchange (ETDEWEB)

Shestov, P I; Golub, A G; Yefremov, V I

1980-08-07

A hinged roof timer is suggested which includes a beam with prong and loop on the end which have openings in the form of ring slits for the distance wedges and round for the pins. In this case the opening of the distance wedge in the ring is arranged in relation to the opening for the pin closer to the end of the beam, and in the prong, in the opposite order. In order to improve the operating quality by guaranteeing active support of the cantilever roof timber without increasing its overall dimensions for the height of the opening for the distance wedge in the prong and the ring, beams are arranged axisymmetrically to the longitudinal axis.

Extant contents of chromium, copper and arsenic in waste CCA-treated timber

International Nuclear Information System (INIS)

Chiba, Keiko; Uchida, Shinpei; Honma, Yoshinori; Sera, Koichiro; Saitoh, Katsumi

2009-01-01

The segregation and disposal of chromated copper arsenate (CCA)-treated wood waste when recycling building waste materials is a serious issue. We examined the contents of CCA preserved cedar timber by PIXE analysis. CCA preserved timber contained large amounts of these metals both on the surface and core of the wood. The ratio of chromium, copper and arsenic contained on the surface was 1:2:1, and in contrast, the ratio in the core was 1:1:2. In other words, the arsenic content was highest in the core. Moreover, the chemical form of arsenic in both parts of the wood was only inorganic arsenic; the same form of arsenic in preservative components known as carcinogenic substances. These findings mean that the complete separation of waste CCA preserved timber from construction and demolition wood is needed. (author)

Soil carbon storage following road removal and timber harvesting in redwood forests

Science.gov (United States)

Seney, Joseph; Madej, Mary Ann

2015-01-01

Soil carbon storage plays a key role in the global carbon cycle and is important for sustaining forest productivity. Removal of unpaved forest roads has the potential for increasing carbon storage in soils on forested terrain as treated sites revegetate and soil properties improve on the previously compacted road surfaces. We compared soil organic carbon (SOC) content at several depths on treated roads to SOC in adjacent second-growth forests and old-growth redwood forests in California, determined whether SOC in the upper 50 cm of soil varies with the type of road treatment, and assessed the relative importance of site-scale and landscape-scale variables in predicting SOC accumulation in treated road prisms and second-growth redwood forests. Soils were sampled at 5, 20, and 50 cm depths on roads treated by two methods (decommissioning and full recontouring), and in adjacent second-growth and old-growth forests in north coastal California. Road treatments spanned a period of 32 years, and covered a range of geomorphic and vegetative conditions. SOC decreased with depth at all sites. Treated roads on convex sites exhibited higher SOC than on concave sites, and north aspect sites had higher SOC than south aspect sites. SOC at 5, 20, and 50 cm depths did not differ significantly between decommissioned roads (treated 18–32 years previous) and fully recontoured roads (treated 2–12 years previous). Nevertheless, stepwise multiple regression models project higher SOC developing on fully recontoured roads in the next few decades. The best predictors for SOC on treated roads and in second-growth forest incorporated aspect, vegetation type, soil depth, lithology, distance from the ocean, years since road treatment (for the road model) and years since harvest (for the forest model). The road model explained 48% of the variation in SOC in the upper 50 cm of mineral soils and the forest model, 54%

Commercial lumber, round timbers, and ties

Science.gov (United States)

David E. Kretschmann

2010-01-01

When sawn, a log yields round timber, ties, or lumber of varying quality. This chapter presents a general discussion of grading, standards, and specifications for these commercial products. In a broad sense, commercial lumber is any lumber that is bought or sold in the normal channels of commerce. Commercial lumber may be found in a variety of forms, species, and types...

Response of cotton, alfalfa, and cantaloupe to foliar-deposited salt in an arid environment

International Nuclear Information System (INIS)

Hofmann, W.C.; Karpiscak, M.M.; Bartels, P.G.

1987-01-01

The cooling towers at the Palo Verde Nuclear Generating Station (PVNGS), located 80 km west of Phoenix, AZ, will release as estimated 2.1 Mg/d of particulates (primarily salts) into the atmosphere when the station is in full operation. The saline drift will disperse and settle onto agricultural fields surrounding the station. Field studies were conducted in 1983 to investigate the influence of foliar-applied saline aerosol on crop growth, foliar injury, and tissue elemental concentration on cotton (Gossypium hirsutum L.), alfalfa (medicago sativa L.), and cantaloupe (Cucumis melo L.) in an arid environment. The treatment aerosol solutions simulated treated wastewater effluent and included all essential plant nutrients and other elements, including trace concentrations of heavy metals. The treatments included unsprayed plots, and plots sprayed with salt solutions at 0 (distilled water), 8, 83, and 415 kg/(ha yr). The alfalfa received an additional 829 kg/(ha yr) treatment. The species were evaluated in separate experiments on Mohave clay loam and Sonoita sandy loam soils (Typic Haplargid) near Marana, AZ. Cotton treated with 415 kg/(ha yr) had significantly less chlorosis and tended to be slightly taller than the cotton in the unsprayed plots. The alfalfa treated at a rate of 829 kg/(ha yr) showed significantly more leaf margin necrosis than did the unsprayed alfalfa. In the cantaloupe, there were no visually apparent differences among salt treatments. Hand-harvested cotton plots had a significant reduction is seed cotton yield at the 415 kg/(ha yr) treatment. A similar though nonsignificant, trend towards reduced yield with increased salt treatment was observed in machine-harvested cotton plots

Outgrower timber schemes in KwaZulu-Natal – Do they build sustainable rural livelihoods and what interventions should be made?

CSIR Research Space (South Africa)

Cairns, RI

2000-01-01

Full Text Available Small-scale timber growers access commercial timber markets in KwaZulu-Natal through three mechanisms. These are; highly structured contractual arrangements (SAPPI, Lima and Mondi); membership in commercial forest-owners associations or timber...

Designing A General Deep Web Harvester by Harvestability Factor

NARCIS (Netherlands)

Khelghati, Mohammadreza; van Keulen, Maurice; Hiemstra, Djoerd

2014-01-01

To make deep web data accessible, harvesters have a crucial role. Targeting different domains and websites enhances the need of a general-purpose harvester which can be applied to different settings and situations. To develop such a harvester, a large number of issues should be addressed. To have

26 CFR 1.611-3 - Rules applicable to timber.

Science.gov (United States)

2010-04-01

..., the total quantity under consideration, and the location of the timber in question with reference to... or shares, royalties and rentals, valuation for local or State taxation, partnership accountings...

Rating a Wildfire Mitigation Strategy with an Insurance Premium: A Boreal Forest Case Study

Directory of Open Access Journals (Sweden)

Georgina Rodriguez-Baca

2016-05-01

Full Text Available Risk analysis entails the systematic use of historical information to determine the frequency, magnitude and effects of unexpected events. Wildfire in boreal North America is a key driver of forest dynamics and may cause very significant economic losses. An actuarial approach to risk analysis based on cumulative probability distributions was developed to reduce the adverse effects of wildfire. To this effect, we developed spatially explicit landscape models to simulate the interactions between harvest, fire and forest succession over time in a boreal forest of eastern Canada. We estimated the amount of reduction of timber harvest necessary to build a buffer stock of sufficient size to cover fire losses and compared it to an insurance premium estimated in units of timber volume from the probability of occurrence and the amount of damage. Overall, the timber harvest reduction we applied was much more costly than the insurance premium even with a zero interest rate. This is due to the fact that the insurance premium is directly related to risk while the timber harvest reduction is not and, as a consequence, is much less efficient. These results, especially the comparison with a standard indicator such as an insurance premium, have useful implications at the time of choosing a mitigation strategy to protect timber supplies against risk without overly diminishing the provision of services from the forest. They are also promoting the use of insurance against disastrous events in forest management planning.

36 CFR 223.7 - Permission for free use of timber outside free-use areas.

Science.gov (United States)

2010-07-01

..., DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER General Provisions § 223.7 Permission for free use of timber outside free-use areas. Similar material may be cut outside of a free-use area without permit in cases of emergency, but the person taking such material shall promptly notify...

Projecting Timber Inventory at the Product Level

Science.gov (United States)

Lawrence Teeter; Xiaoping Zhou

1999-01-01

Current timber inventory projections generally lack information on inventory by product classes. Most models available for inventory projection and linked to supply analyses are limited to projecting aggregate softwood and hardwood. The research presented describes a methodology for distributing the volume on each FIA (USDA Forest Service Forest Inventory and Analysis...

31 CFR 593.510 - Transactions related to the importation of any round log or timber product originating in Liberia...

Science.gov (United States)

2010-07-01

... importation of any round log or timber product originating in Liberia authorized. 593.510 Section 593.510... importation of any round log or timber product originating in Liberia authorized. Except as otherwise... into the United States of any round log or timber product originating in Liberia are authorized. ...

Salt tolerant green crop species for sodium management in space agriculture

Science.gov (United States)

Yamashita, Masamichi; Hashimoto, Hirofumi; Tomita-Yokotani, Kaori; Shimoda, Toshifumi; Nose, Akihiro; Space Agriculture Task Force, J.

Ecological system and materials recycling loop of space agriculture are quite tight compared to natural ecological system on Earth. Sodium management will be a keen issue for space agricul-ture. Human nutritional requirements include sodium salt. Since sodium at high concentration is toxic for most of plant growth, excreted sodium of human waste should be removed from compost fertilizer. Use of marine algae is promising for harvesting potassium and other min-erals required for plant growth and returning remained sodium to satisfy human need of its intake. Farming salt tolerant green crop species is another approach to manage sodium problem in both space and terrestrial agriculture. We chose ice plant and New Zealand spinach. These two plant species are widely accepted green vegetable with many recipe. Ice plant can grow at the salinity level of sea water, and contain sodium salt up to 30% of its dry mass. Sodium distributes mainly in its bladder cells. New Zealand spinach is a plant species found in the front zone of sea shore, and tolerant against high salinity as well. Plant body size of both species at harvest is quite large, and easy to farm. Capability of bio-remediation of high saline soil is examined with ice plant and New Zealand spinach. Incubation medium was chosen to contain high concentration of sodium and potassium at the Na/K ratio of human excreta. In case Na/K ratio of plant body grown by this medium is greatly higher than that of incubation medium or soil, these halophytes are effective to remediate soil for farming less tolerant plant crop. Experimental results was less positive in this context.

Fire resistance in American heavy timber construction history and preservation

CERN Document Server

Heitz, Jesse

2016-01-01

This volume presents a history of heavy timber construction (HTC) in the United States, chronicling nearly two centuries of building history, from inception to a detailed evaluation of one of the best surviving examples of the type, with an emphasis on fire resistance. The book does not limit itself in scope to serving only as a common history. Rather, it provides critical analysis of HTC in terms of construction methods, design, technical specifications, and historical performance under fire conditions. As such, this book provides readers with a truly comprehensive understanding and exploration of heavy timber construction in the United States and its performance under fire conditions.

Timber joints under long-term loading

DEFF Research Database (Denmark)

Feldborg, T.; Johansen, M.

This report describes tests and results from stiffness and strength testing of splice joints under long-term loading. During two years of loading the spicimens were exposed to cyclically changing relative humidity. After the loading period the specimens were short-term tested. The connectors were...... integral nail-plates and nailed steel and plywood gussets. The report is intended for designers and researchers in timber engineering....

Grading timber and glued structural members

Science.gov (United States)

David E. Kretschmann; Roland Hernandez

2006-01-01

Because of its biological nature, which is influenced by many factors as discussed in Chapter 6, the quality of timber is enormously variable. Therefore, some sort of arrangement or classification must be undertaken prior to its use, in order to get the most out of this valuable resource. It is obvious that not all lumber can be used for the same purposes because not...

Salvage logging following fires can minimize boreal caribou habitat loss while maintaining forest quotas: An example of compensatory cumulative effects.

Science.gov (United States)

Beguin, Julien; McIntire, Eliot J B; Raulier, Frédéric

2015-11-01

Protected area networks are the dominant conservation approach that is used worldwide for protecting biodiversity. Conservation planning in managed forests, however, presents challenges when endangered species use old-growth forests targeted by the forest industry for timber supply. In many ecosystems, this challenge is further complicated by the occurrence of natural disturbance events that disrupt forest attributes at multiple scales. Using spatially explicit landscape simulation experiments, we gather insights into how these large scale, multifaceted processes (fire risk, timber harvesting and the amount of protected area) influenced both the persistence of the threatened boreal caribou and the level of timber supply in the boreal forest of eastern Canada. Our result showed that failure to account explicitly and a priori for fire risk in the calculation of timber supply led to an overestimation of timber harvest volume, which in turn led to rates of cumulative disturbances that threatened both the long-term persistence of boreal caribou and the sustainability of the timber supply itself. Salvage logging, however, allowed some compensatory cumulative effects. It minimised the reductions of timber supply within a range of ∼10% while reducing the negative impact of cumulative disturbances caused by fire and logging on caribou. With the global increase of the human footprint on forest ecosystems, our approach and results provide useful tools and insights for managers to resolve what often appear as lose-lose situation between the persistence of species at risk and timber harvest in other forest ecosystems. These tools contribute to bridge the gap between conservation and forest management, two disciplines that remain too often disconnected in practice. Copyright © 2015 Elsevier Ltd. All rights reserved.

Energy harvesting from high-rise buildings by a piezoelectric harvester device

International Nuclear Information System (INIS)

Xie, X.D.; Wang, Q.; Wang, S.J.

2015-01-01

A novel piezoelectric technology of harvesting energy from high-rise buildings is developed. While being used to harness vibration energy of a building, the technology is also helpful to dissipate vibration of the building by the designed piezoelectric harvester as a tuned mass damper. The piezoelectric harvester device is made of two groups of series piezoelectric generators connected by a shared shaft. The shaft is driven by a linking rod hinged on a proof mass on the tip of a cantilever fixed on the roof of the building. The influences of some practical considerations, such as the mass ratio of the proof mass to the main structure, the ratios of the length and flexural rigidity of the cantilever to those of the main structure, on the root mean square (RMS) of the generated electric power and the energy harvesting efficiency of the piezoelectric harvester device are discussed. The research provides a new method for an efficient and practical energy harvesting from high-rise buildings by piezoelectric harvesters. - Highlights: • A new piezoelectric technology in energy harvesting from high-rise buildings is introduced. • A new mathematics model to calculate the energy harvested by the piezoelectric device is developed. • A novel efficient design of the piezoelectric harvester device in provided. • An electric power up to 432 MW under a seismic excitation at a frequency of 30 rad/s is achieved.

Residual load carrying capacity of timber joints

NARCIS (Netherlands)

Kuilen, J.W.G. van de

1999-01-01

Timber joints that have been preloaded for 2 to 8 years have been short term tested in accordance with EN 26891. The applied load levels varied between 30% and 50% of the average short term strength. The study comprised nailed, toothed-plate and split-ring joints. All joints were made of spruce and

Forests, timber and rural livelihoods

DEFF Research Database (Denmark)

Hansen, Christian Pilegaard; Pouliot, Mariève; Marfo, Emmanuel

2015-01-01

Based on detailed income data of 478 rural households, the nexus between forest, trees and rural livelihoods in Ghana is investigated and applied to assess implications of the Voluntary Partnership Agreement (VPA) between the EU and Ghana on illegal logging. It is found that, after crops...... and benefits to trees on farm and fallow land to those occupying and cultivating the land. Such efforts would provide incentive for timber production and thus enhance rural livelihoods, while combatting illegal logging, deforestation and forest degradation....

Socio-economic factors influencing marketing of non-timber forest ...

African Journals Online (AJOL)

Socio-economic factors influencing marketing of non-timber forest products in ... enhance skills for product transformation, build innovative storage facilities, and ... the process of domestication and integration in traditional land-use systems.

NDE investigation of the timber foundation in the historic Kennecott Mine Concentration Mill Building

Science.gov (United States)

James P. Wacker; Xiping Wang; Douglas R. Rammer; Bessie M. Woodward

2011-01-01

The U.S. National Park Service acquired the National Historic Copper Mine at Kennecott, Alaska, in 1998. There was uncertainty about the condition of the timber-cribbing foundation supporting the concentration mill, the largest building in the mine complex. A comprehensive on-site evaluation of the timber cribbing foundation was performed in summer 2009. The inspection...

36 CFR 223.85 - Noncompetitive sale of timber.

Science.gov (United States)

2010-07-01

... further advertisement, at not less than appraised value, any timber previously advertised for competitive... degradation or resource damage, or as the result of administrative appeals, litigation, or court orders... any applicable appeals or objection process has been completed may be considered for replacement...

Evaluating Economic Impacts of Expanded Global Wood Energy Consumption with the USFPM/GFPM Model

Science.gov (United States)

Peter J. Ince; Andrew Kramp; Kenneth E. Skog

2012-01-01

A U.S. forest sector market module was developed within the general Global Forest Products Model. The U.S. module tracks regional timber markets, timber harvests by species group, and timber product outputs in greater detail than does the global model. This hybrid approach provides detailed regional market analysis for the United States although retaining the...

CONTRIBUTION TO THE POTENTIAL OF USING FRP MATERIALS IN THE REHABILITATION AND STABILIZATION OF TIMBERED BUILDINGS

Directory of Open Access Journals (Sweden)

Tomáš Čejka

2015-12-01

Full Text Available Wooden log, timbered perimeter and interior walls ranked among the most common building constructions used from the Early Middle Ages. In most cases, the local natural resources, i.e. wood, clay, straw and stone, were used for building houses with wooden framing. This article outlines typical defects and failures of timbered houses, “classic” techniques for the rehabilitation of these defects and failures indicating the potential of using composite materials based on high- strength fibres and epoxy resin in the rehabilitation and strengthening of timbered buildings.

Striving for Sustainability and Resilience in the Face of Unprecedented Change: The Case of the Mountain Pine Beetle Outbreak in British Columbia

Directory of Open Access Journals (Sweden)

Philip J. Burton

2010-07-01

Full Text Available A massive insect outbreak in the public forests of central British Columbia (Canada poses a serious challenge for sustainable forest management planning. Tree mortality caused by natural disturbances has always been a part of wild and managed forests, but climate change is accentuating the uncertainty around such losses. Policy responses to accelerate overall timber harvesting levels to prevent further tree mortality and to aggressively salvage value from dead wood before it deteriorates can be disruptive and even counter-productive in the long run. Current alternatives are to strategically redirect existing timber harvesting quotas to the most vulnerable areas, minimize overall uplifts in cutting activity, prolong the period over which harvested timber can be processed, avoid the harvesting of mixed species stands or those with good advance regeneration, employ more partial cutting or “selective logging” techniques, and relax standards for acceptable species and inter-tree spacing during post-disturbance stand recovery. At the same time, careful attention to species composition and evolving landscape risk profiles may facilitate adaptation to anticipated climate change and reduce vulnerability to future disturbances. Harvest levels must be set conservatively over the full planning horizon if it is important to assure continuity of the timber supply with few disruptions to regional socio-economics and less stress to ecosystems. Broader lessons in sustainability include the option to emphasize persistence, continuity and flexibility over the long term, though at the expense of maximized production and full resource utilization in the short term.

36 CFR 223.63 - Advertised rates.

Science.gov (United States)

2010-07-01

...-infested, diseased, dead, or distressed timber may be sold at less than minimum rates when harvest of such timber is necessary to protect or improve the forest or prevent waste of usable wood fiber. [71 FR 11510...

Roof timber for fortifying mining works

Energy Technology Data Exchange (ETDEWEB)

Shirokov, A P; Kuntsevich, V IK; Pishchulin, V V; Seryi, A M; Volkov, P A

1981-05-15

The roof timber for fortifying mining works includes spring-mounted hinged elements made from a special rolled metal. In order to increase the carrying capacity of the support by increasing the deformation threshold, the springs are mounted by their expanded section to the lower side of the hinge; their ends are connected in turn to the elements made from the special rolled metal on both sides of the hinge.

ECOLOGICAL EFFECT OF TIMBER EXPRACTION IN OHIMINI LGA ...

African Journals Online (AJOL)

Shima

as Indonesia, Thailand, Malaysia, ... reduced biodiversity (Wikipedia, 2007). In many countries massive timber extraction is ongoing and is shaping climate and geography. logging affects the amount of water in the soil and groundwater and the moisture in the atmosphere. Forests support considerable biodiversity, providing.

Performance of Sprayed Fiber Reinforced Polymer Strengthened Timber Beams

Directory of Open Access Journals (Sweden)

S. Talukdar

2010-01-01

Full Text Available A study was carried out to investigate the use of Sprayed Fiber Reinforced Polymer (SFRP for retrofit of timber beams. A total of 10-full scale specimens were tested. Two different timber preservatives and two different bonding agents were investigated. Strengthening was characterized using load deflection diagrams. Results indicate that it is possible to enhance load-carrying capacity and energy absorption characteristics using the technique of SFRP. Of the two types of preservatives investigated, the technique appears to be more effective for the case of creosote-treated specimens, where up to a 51% improvement in load-carrying capacity and a 460% increase in the energy absorption capacity were noted. Effectiveness of the bonding agent used was dependent on the type of preservative the specimen had been treated with.

Simulation-Based Multiobjective Optimization of Timber-Glass Residential Buildings in Severe Cold Regions

Directory of Open Access Journals (Sweden)

Yunsong Han

2017-12-01

Full Text Available In the current context of increasing energy demand, timber-glass buildings will become a necessary trend in sustainable architecture in the future. Especially in severe cold zones of China, energy consumption and the visual comfort of residential buildings have attracted wide attention, and there are always trade-offs between multiple objectives. This paper aims to propose a simulation-based multiobjective optimization method to improve the daylighting, energy efficiency, and economic performance of timber-glass buildings in severe cold regions. Timber-glass building form variables have been selected as the decision variables, including building width, roof height, south and north window-to-wall ratio (WWR, window height, and orientation. A simulation-based multiobjective optimization model has been developed to optimize these performance objectives simultaneously. The results show that Daylighting Autonomy (DA presents negative correlations with Energy Use Intensity (EUI and total cost. Additionally, with an increase in DA, Useful Daylighting Illuminance (UDI demonstrates a tendency of primary increase and then decrease. Using this optimization model, four building performances have been improved from the initial generation to the final generation, which proves that simulation-based multiobjective optimization is a promising approach to improve the daylighting, energy efficiency, and economic performances of timber-glass buildings in severe cold regions.

XAS studies of the effectiveness of iron chelating treatments of Mary Rose timbers

International Nuclear Information System (INIS)

Berko, A; Schofield, E J; Chadwick, A V; Smith, A D; Jones, A M; Mosselmans, J F W

2009-01-01

The oxidation of sulfur in marine archaeological timbers under museum storage conditions is a recently identified problem, particularly for major artefacts such as historic ships excavated from the seabed. Recent work on the Vasa has stressed the role of iron in catalysing the oxidative degradation of the wood cellulose and the polyethylene glycols used to restore mechanical integrity to the timbers. In developing new treatment protocols for the long term preservation of Henry VIII of England's flagship, the Mary Rose, we are investigating the potential of chelating agents to neutralise and remove the iron products from the ships timbers. We have explored the use of aqueous solutions of chelating agents of calcium phytate, ethylenediaminetetraacetic acid (EDTA), diethylenetriaminepentaacetic acid (DTPA) and ammonium citrate to extract the iron compounds. All of these solutions exhibit some level of iron removal; however the key is to find the most effective concentration at pH of around 7 of the reagent solution, to minimise the treatment time and find the most cost-effective treatment for the whole of the Mary Rose hull. Fe K-edge XAFS data from samples of Mary Rose timbers, before and after treatment by the chelating agents mentioned has been collected. The data collected provide valuable insights into the effectiveness of the treatment solutions.

Effects of Inhalation of Emissions from Cedar Timber on Psychological and Physiological Factors in an Indoor Environment

Directory of Open Access Journals (Sweden)

Kenichi Azuma

2016-12-01

Full Text Available Components extracted from cedar timber have been reported to have stress-reducing effects in humans. If the positive effects of cedar timber in indoor environments are scientifically proven, an indoor environment that utilizes cedar timber may contribute to the improvement or promotion of well-being in humans. In this study, we evaluated the effects of inhaling emissions of volatile constituents from cedar timber (Cryptomeria japonica on the psychological and physiological factors in indoor environments. A case-control study with a crossover design was conducted with 10 subjects occupying two rooms that were controlled for interior materials, indoor climate, and room size. Cedrol and β-eudesmol were specifically detected in the case room. However, no significant differences were observed in psychological and physiological factors. There was a significant loss in vigor in the control group from the time before entering the room to the time after leaving the room; however, this loss in vigor was not seen in the case group. Temperature conditions were higher than the indoor environmental standard in Japan but similar in the two groups. Our results showed a minor positive change in vigor among participants exposed to cedar timber for a short term. Inhalation of emissions of volatile constituents from cedar timber may have positive effects in humans; however, further research on their efficacy is needed.

Experimental verification of a weak zone model for timber in bending