Unsteady Sail Dynamics in Olympic Class Sailboats

Science.gov (United States)

Williamson, Charles; Schutt, Riley

2016-11-01

Unsteady sailing techniques have evolved in competitive sailboat fleets, in cases where the relative weight of the sailor is sufficient to impart unsteady motions to the boat and sails. We will discuss three types of motion that are used by athletes to propel their boats on an Olympic race course faster than using the wind alone. In all of our cases, body weight movements induce unsteady sail motion, increasing driving force and speed through the water. In this research, we explore the dynamics of an Olympic class Laser sailboat equipped with a GPS, IMU, wind sensor, and a 6-GoPro camera array. We shall briefly discuss "sail flicking", whereby the helmsman periodically rolls the sail into the apparent wind, at an angle which is distinct from classical heave (in our case, the oscillations are not normal to the apparent flow). We also demonstrate "roll tacking", where there are considerable advantages to rolling the boat during such a maneuver, especially in light wind. In both of the above examples from on-the-water studies, corresponding experiments using a towing tank exhibit increases in the driving force, associated with the formation of strong vortex pairs into the flow. Finally, we focus on a technique known as "S-curving" in the case where the boat sails downwind. In contrast to the previous cases, it is drag force rather than lift force that the sailor is trying to maximise as the boat follows a zig-zag trajectory. The augmented apparent wind strength due to the oscillatory sail motion, and the growth of strong synchronised low-pressure wake vortices on the low-pressure side of the sail, contribute to the increase in driving force, and velocity-made-good downwind.

Power Beamed Photon Sails: New Capabilities Resulting From Recent Maturation Of Key Solar Sail And High Power Laser Technologies

International Nuclear Information System (INIS)

Montgomery, Edward E. IV

2010-01-01

This paper revisits some content in the First International Symposium on Beamed Energy Propulsion in 2002 related to the concept of propellantless in-space propulsion utilizing an external high energy laser to provide momentum to an ultralightweight (gossamer) spacecraft. The design and construction of the NanoSail-D solar sail demonstration spacecraft has demonstrated in space flight hardware the concept of small, very light--yet capable--spacecraft. The results of the Joint High Power Solid State Laser (JHPSSL) have also increased the effectiveness and reduced the cost of an entry level laser source. This paper identifies the impact from improved system parameters on current mission applications.

Investigations on sail force by full scale measurement and numerical calculation. Part 1. Steady sailing performance; Sail ryutairyoku ni kansuru jissen shiken to suchi keisan. 1. Teijo hanso seino

Energy Technology Data Exchange (ETDEWEB)

Masuyama, Y.; Fukasawa, T. [Kanazawa Institute of Technology, Ishikawa (Japan); Kitazaki, T. [DMW Corp., Tokyo (Japan)

1997-06-01

Sailing forces are measured with a 10.3m long full-scale sailing boat, equipped with a sail force dynamometer, CCD camera for sail shape measurement and an instrument for detecting sailing conditions of the hull, in order to obtain highly reliable performance data of a sailing yacht. The vortex lattice method is used for step-by-step numerical calculations, and the results are compared with the observed ones. The test results clearly show performance changing with slight changes in relative wind directions and sail shapes, which are not clearly obtained by the traditional wind tunnel tests. The calculated results, although deviating from the observed ones to some extent, well represent trends of performance changing with wind directions and sail shapes. In particular, changed performance caused by slight changes in draft at the main sail is clearly demonstrated. The numerical calculation is considered to be useful for searching for sail trim conditions. 17 refs., 18 figs., 1 tab.

Isometric quadriceps strength determines sailing performance and neuromuscular fatigue during an upwind sailing emulation.

Science.gov (United States)

Bourgois, Jan G; Callewaert, Margot; Celie, Bert; De Clercq, Dirk; Boone, Jan

2016-01-01

This study investigates the physiological responses to upwind sailing on a laser emulation ergometer and analyses the components of the physical profile that determine the physiological responses related to sailing level. Ten male high-level laser sailors performed an upwind sailing test, incremental cycling test and quadriceps strength test. During the upwind sailing test, heart rate (HR), oxygen uptake, ventilation, respiratory exchange ratio, rating of perceived exertion (RPE) and lactate concentration were measured, combined with near-infrared spectroscopy (NIRS) and electromyography (EMG) registration of the M. Vastus lateralis. Repeated measures ANOVA showed for the cardio-respiratory, metabolic and muscles responses (mean power frequency [MPF], root mean square [RMS], deoxy[Hb+Mb]) during the upwind sailing test an initial significant increase followed by a stabilisation, despite a constant increase in RPE. Stepwise regression analysis showed that better sailing level was for 46.5% predicted by lower MPF decrease. Lower MPF decrease was for 57.8% predicted by a higher maximal isometric quadriceps strength. In conclusion, this study indicates that higher sailing level was mainly determined by a lower rate of neuromuscular fatigue during the upwind sailing test (as indicated by MPF decrease). Additionally, the level of neuromuscular fatigue was mainly determined by higher maximal isometric quadriceps strength stressing the importance of resistance training in the planning of training.

On Possibility of Direct Asteroid Deflection by Electric Solar Wind Sail

Science.gov (United States)

Merikallio, Sini; Janhunen, Pekka

2010-05-01

The Electric Solar Wind Sail (E-sail) is a new propulsion method for interplanetary travel which was invented in 2006 and is currently under development. The E-sail uses charged tethers to extract momentum from the solar wind particles to obtain propulsive thrust. According to current estimates, the E-sail is 2-3 orders of magnitude better than traditional propulsion methods (chemical rockets and ion engines) in terms of produced lifetime-integrated impulse per propulsion system mass. Here we analyze the problem of using the E-sail for directly deflecting an Earth-threatening asteroid. The problem then culminates into how to attach the E-sail device to the asteroid. We assess a number of alternative attachment strategies and arrive at a recommendation of using the gravity tractor method because of its workability for a wide variety of asteroid types. We also consider possible techniques to scale up the E-sail force beyond the baseline one Newton level to deal with more imminent or larger asteroid or cometary threats. As a baseline case we consider a 3 million ton asteroid which can be deflected with a baseline 1 N E-sail in 5-10 years. Once developed, the E-sail would appear to provide a safe and reasonably low-cost way of deflecting dangerous asteroids and other heavenly bodies in cases where the collision threat becomes known several years in advance.

Status of solar sail technology within NASA

Science.gov (United States)

Johnson, Les; Young, Roy; Montgomery, Edward; Alhorn, Dean

2011-12-01

In the early 2000s, NASA made substantial progress in the development of solar sail propulsion systems for use in robotic science and exploration of the solar system. Two different 20-m solar sail systems were produced. NASA has successfully completed functional vacuum testing in their Glenn Research Center's Space Power Facility at Plum Brook Station, Ohio. The sails were designed and developed by Alliant Techsystems Space Systems and L'Garde, respectively. The sail systems consist of a central structure with four deployable booms that support each sail. These sail designs are robust enough for deployment in a one-atmosphere, one-gravity environment and are scalable to much larger solar sails - perhaps as large as 150 m on a side. Computation modeling and analytical simulations were performed in order to assess the scalability of the technology to the larger sizes that are required to implement the first generation of missions using solar sails. Furthermore, life and space environmental effects testing of sail and component materials was also conducted.NASA terminated funding for solar sails and other advanced space propulsion technologies shortly after these ground demonstrations were completed. In order to capitalize on the $30 M investment made in solar sail technology to that point, NASA Marshall Space Flight Center funded the NanoSail-D, a subscale solar sail system designed for possible small spacecraft applications. The NanoSail-D mission flew on board a Falcon-1 rocket, launched August 2, 2008. As a result of the failure of that rocket, the NanoSail-D was never successfully given the opportunity to achieve orbit. The NanoSail-D flight spare was flown in the Fall of 2010. This review paper summarizes NASA's investment in solar sail technology to date and discusses future opportunities.

Status of Solar Sail Technology Within NASA

Science.gov (United States)

Johnson, Les; Young, Roy; Montgomery, Edward; Alhorn, Dean

2010-01-01

In the early 2000s, NASA made substantial progress in the development of solar sail propulsion systems for use in robotic science and exploration of the solar system. Two different 20-m solar sail systems were produced and they successfully completed functional vacuum testing in NASA Glenn Research Center's (GRC's) Space Power Facility at Plum Brook Station, Ohio. The sails were designed and developed by ATK Space Systems and L Garde, respectively. The sail systems consist of a central structure with four deployable booms that support the sails. These sail designs are robust enough for deployment in a one-atmosphere, one-gravity environment and were scalable to much larger solar sails perhaps as large as 150 m on a side. Computation modeling and analytical simulations were also performed to assess the scalability of the technology to the large sizes required to implement the first generation of missions using solar sails. Life and space environmental effects testing of sail and component materials were also conducted. NASA terminated funding for solar sails and other advanced space propulsion technologies shortly after these ground demonstrations were completed. In order to capitalize on the $30M investment made in solar sail technology to that point, NASA Marshall Space Flight Center (MSFC) funded the NanoSail-D, a subscale solar sail system designed for possible small spacecraft applications. The NanoSail-D mission flew on board the ill-fated Falcon-1 Rocket launched August 2, 2008, and due to the failure of that rocket, never achieved orbit. The NanoSail-D flight spare will be flown in the Fall of 2010. This paper will summarize NASA's investment in solar sail technology to-date and discuss future opportunities

The Physics and Technology of Solar Sail Spacecraft.

Science.gov (United States)

Dwivedi, B. N.; McInnes, C. R.

1991-01-01

Various aspects of the solar sail spacecraft such as solar sailing, solar sail design, navigation with solar sails, solar sail mission applications and future prospects for solar sailing are described. Several possible student projects are suggested. (KR)

Solar Sailing is not Science Fiction Anymore

Science.gov (United States)

Alhorn, Dean C.

2010-01-01

Over 400 years ago Johannes Kepler envisioned the use of sunlight to propel a spacecraft. Just this year, a solar sail was deployed in orbit for the first time and proved that a spacecraft could effectively use a solar sail for propulsion. NASA's first nano-class solar sail satellite, NanoSail-D was designed and developed in only four months. Although the first unit was lost during the Falcon 1 rocket failure in 2008, the second flight unit has been refurbished and is waiting to be launched later this year. NanoSail-D will further the research into solar sail enabled spacecraft. It will be the first of several more sail enabled spacecraft to be launch in the next few years. FeatherSail is the next generation nano-class sail spacecraft being designed with the goal to prove low earth orbit operational capabilities. Future solar sail spacecraft will require novel ideas and innovative research for the continued development of space systems. One such pioneering idea is the Small Multipurpose Advanced Reconfigurable Technology (SMART) project. The SMART technology has the potential to revolutionize spacecraft avionics. Even though solar sailing is currently in its infancy, the next decade will provide great opportunities for research into sailing in outer space.

NASA Solar Sail Propulsion Technology Development

Science.gov (United States)

Johnson, Les; Montgomery, Edward E.; Young, Roy; Adams, Charles

2007-01-01

NASA's In-Space Propulsion Technology Program has developed the first generation of solar sail propulsion systems sufficient to accomplish inner solar system science and exploration missions. These first generation solar sails, when operational, will range in size from 40 meters to well over 100 meters in diameter and have an areal density of less than 13 grams per square meter. A rigorous, multi-year technology development effort culminated in 2005 with the testing of two different 20-m solar sail systems under thermal vacuum conditions. The first system, developed by ATK Space Systems of Goleta, California, uses rigid booms to deploy and stabilize the sail. In the second approach, L'Garde, Inc. of Tustin, California uses inflatable booms that rigidize in the coldness of space to accomplish sail deployment. This effort provided a number of significant insights into the optimal design and expected performance of solar sails as well as an understanding of the methods and costs of building and using them. In a separate effort, solar sail orbital analysis tools for mission design were developed and tested. Laboratory simulations of the effects of long-term space radiation exposure were also conducted on two candidate solar sail materials. Detailed radiation and charging environments were defined for mission trajectories outside the protection of the earth's magnetosphere, in the solar wind environment. These were used in other analytical tools to prove the adequacy of sail design features for accommodating the harsh space environment. Preceding and in conjunction with these technology efforts, NASA sponsored several mission application studies for solar sails. Potential missions include those that would be flown in the near term to study the sun and be used in space weather prediction to one that would use an evolved sail capability to support humanity's first mission into nearby interstellar space. This paper will describe the status of solar sail propulsion within

Flying on Sun Shine: Sailing in Space

International Nuclear Information System (INIS)

Alhorn, Dean

2012-01-01

On January 20th, 2011, NanoSail-D successfully deployed its sail in space. It was the first solar sail vehicle to orbit the earth and the second sail ever unfurled in space. The 10m2 sail, deployment mechanism and electronics were packed into a 3U CubeSat with a volume of about 3500cc. The NanoSail-D mission had two objectives: eject a nanosatellite from a minisatellite; deploy its sail from a highly compacted volume to validate large structure deployment and potential de-orbit technologies. NanoSail-D was jointly developed by NASA's Marshall Space Flight Center and Ames Research Center. The ManTech/NeXolve Corporation provided key sail design support. NanoSail-D is managed by Marshall and jointly sponsored by the Army Space and Missile Defense Command, the Space Test Program, the Von Braun Center for Science and Innovation and Dynetics Inc. The presentation will provide insights into sailcraft advances and potential missions enabled by this emerging in-space propulsion technology.

The aerodynamics of sailing apparel

NARCIS (Netherlands)

Jansen, A.J.; Van Deursen, B.; Howe, C.

2012-01-01

The paper presents the effect of changes in sailing apparel on aerodynamic drag, starting from the assumption that drag reduction of sailing apparel will increase the speed of an Olympic class sailing boat (in this case the Laser, a single-handed Olympic dinghy), mainly on upwind courses. Due to the

Solar Sail Propulsion Technology at NASA

Science.gov (United States)

Johnson, Charles Les

2007-01-01

NASA's In-Space Propulsion Technology Program developed the first generation of solar sail propulsion systems sufficient to accomplish inner solar system science and exploration missions. These first generation solar sails, when operational, will range in size from 40 meters to well over 100 meters in diameter and have an area density of less than 13 grams per square meter. A rigorous, multi-year technology development effort culminated in 2005 with the testing of two different 20-m solar sail systems under thermal vacuum conditions. This effort provided a number of significant insights into the optimal design and expected performance of solar sails as well as an understanding of the methods and costs of building and using them. In addition, solar sail orbital analysis tools for mission design were developed and tested. Laboratory simulations of the effects of long-term space radiation exposure were also conducted on two candidate solar sail materials. Detailed radiation and charging environments were defined for mission trajectories outside the protection of the earth's magnetosphere, in the solar wind environment. These were used in other analytical tools to prove the adequacy of sail design features for accommodating the harsh space environment. The presentation will describe the status of solar sail propulsion within NASA, near-term solar sail mission applications, and near-term plans for further development.

Lightweight Light Sail Propulsion

Data.gov (United States)

National Aeronautics and Space Administration — The areal density of solar sails and laser sails is large due to the heavy support structure made of Mylar, Kapton or CP-1. Replacing this support structure with...

Luffing of planar sails

International Nuclear Information System (INIS)

Newman, B.G.

1985-01-01

In this paper the luffing of an unstiffened, two-dimensional impervious membrane is examined. When a sail boat is close-hauled the sails are required to generate high 'lift' with minimum drag. They therefore operate, as do those on hang-wing gliders, at incidences below the stall. However, unlike solid wings they must also avoid negative incidences for then a sail begins to lose its concave shape, to become S shaped and finally, as the incidence is further reduced, to oscillate, a behaviour known as luffing

Developments of an Interactive Sail Design Method

Directory of Open Access Journals (Sweden)

S. M. Malpede

2000-01-01

Full Text Available This paper presents a new tool for performing the integrated design and analysis of a sail. The features of the system are the geometrical definition of a sail shape, using the Bezier surface method, the creation of a finite element model for the non-linear structural analysis and a fluid-dynamic model for the aerodynamic analysis. The system has been developed using MATLAB(r. Recent sail design efforts have been focused on solving the aeroelastic behavior of the sail. The pressure distribution on a sail changes continuously, by virtue of cloth stretch and flexing. The sail shape determines the pressure distribution and, at the same time, the pressure distribution on the sail stretches and flexes the sail material determining its shape. This characteristic non-linear behavior requires iterative solution strategies to obtain the equilibrium configuration and evaluate the forces involved. The aeroelastic problem is tackled by combining structural with aerodynamic analysis. Firstly, pressure loads for a known sail-shape are computed (aerodynamic analysis. Secondly, the sail-shape is analyzed for the obtained external loads (structural analysis. The final solution is obtained by using an iterative analysis process, which involves both aerodynamic and the structural analysis. When the solution converges, it is possible to make design modifications.

Investigation of the Airflow around a Sail.

Science.gov (United States)

Gray, Rachel P.

1986-01-01

Shows how air flows around a sail, explaining why a dinghy is able to move toward the wind rather than be blown backwards. Also illustrates the effects of alternating the angle of a sail, using different sail shapes and using a rig consisting of two sails. (JN)

SETI VIA LEAKAGE FROM LIGHT SAILS IN EXOPLANETARY SYSTEMS

International Nuclear Information System (INIS)

Guillochon, James; Loeb, Abraham

2015-01-01

The primary challenge of rocket propulsion is the burden of needing to accelerate the spacecraft’s own fuel, resulting in only a logarithmic gain in maximum speed as propellant is added to the spacecraft. Light sails offer an attractive alternative in which fuel is not carried by the spacecraft, with acceleration being provided by an external source of light. By artificially illuminating the spacecraft with beamed radiation, speeds are only limited by the area of the sail, heat resistance of its material, and power use of the accelerating apparatus. In this paper, we show that leakage from a light sail propulsion apparatus in operation around a solar system analogue would be detectable. To demonstrate this, we model the launch and arrival of a microwave beam-driven light sail constructed for transit between planets in orbit around a single star, and find an optimal beam frequency on the order of tens of GHz. Leakage from these beams yields transients with flux densities of Jy and durations of tens of seconds at 100 pc. Because most travel within a planetary system would be conducted between the habitable worlds within that system, multiply transiting exoplanetary systems offer the greatest chance of detection, especially when the planets are in projected conjunction as viewed from Earth. If interplanetary travel via beam-driven light sails is commonly employed in our galaxy, this activity could be revealed by radio follow-up of nearby transiting exoplanetary systems. The expected signal properties define a new strategy in the search for extraterrestrial intelligence (SETI)

SETI via Leakage from Light Sails in Exoplanetary Systems

Science.gov (United States)

Guillochon, James; Loeb, Abraham

2015-10-01

The primary challenge of rocket propulsion is the burden of needing to accelerate the spacecraft’s own fuel, resulting in only a logarithmic gain in maximum speed as propellant is added to the spacecraft. Light sails offer an attractive alternative in which fuel is not carried by the spacecraft, with acceleration being provided by an external source of light. By artificially illuminating the spacecraft with beamed radiation, speeds are only limited by the area of the sail, heat resistance of its material, and power use of the accelerating apparatus. In this paper, we show that leakage from a light sail propulsion apparatus in operation around a solar system analogue would be detectable. To demonstrate this, we model the launch and arrival of a microwave beam-driven light sail constructed for transit between planets in orbit around a single star, and find an optimal beam frequency on the order of tens of GHz. Leakage from these beams yields transients with flux densities of Jy and durations of tens of seconds at 100 pc. Because most travel within a planetary system would be conducted between the habitable worlds within that system, multiply transiting exoplanetary systems offer the greatest chance of detection, especially when the planets are in projected conjunction as viewed from Earth. If interplanetary travel via beam-driven light sails is commonly employed in our galaxy, this activity could be revealed by radio follow-up of nearby transiting exoplanetary systems. The expected signal properties define a new strategy in the search for extraterrestrial intelligence (SETI).

SETI VIA LEAKAGE FROM LIGHT SAILS IN EXOPLANETARY SYSTEMS

Energy Technology Data Exchange (ETDEWEB)

Guillochon, James; Loeb, Abraham, E-mail: jguillochon@cfa.harvard.edu, E-mail: aloeb@cfa.harvard.edu [Harvard-Smithsonian Center for Astrophysics, The Institute for Theory and Computation, 60 Garden Street, Cambridge, MA 02138 (United States)

2015-10-01

The primary challenge of rocket propulsion is the burden of needing to accelerate the spacecraft’s own fuel, resulting in only a logarithmic gain in maximum speed as propellant is added to the spacecraft. Light sails offer an attractive alternative in which fuel is not carried by the spacecraft, with acceleration being provided by an external source of light. By artificially illuminating the spacecraft with beamed radiation, speeds are only limited by the area of the sail, heat resistance of its material, and power use of the accelerating apparatus. In this paper, we show that leakage from a light sail propulsion apparatus in operation around a solar system analogue would be detectable. To demonstrate this, we model the launch and arrival of a microwave beam-driven light sail constructed for transit between planets in orbit around a single star, and find an optimal beam frequency on the order of tens of GHz. Leakage from these beams yields transients with flux densities of Jy and durations of tens of seconds at 100 pc. Because most travel within a planetary system would be conducted between the habitable worlds within that system, multiply transiting exoplanetary systems offer the greatest chance of detection, especially when the planets are in projected conjunction as viewed from Earth. If interplanetary travel via beam-driven light sails is commonly employed in our galaxy, this activity could be revealed by radio follow-up of nearby transiting exoplanetary systems. The expected signal properties define a new strategy in the search for extraterrestrial intelligence (SETI)

5th International Robotic Sailing Conference

CERN Document Server

Finnis, James

2013-01-01

Robotic sailing offers the potential of wind propelled vehicles which are sufficiently autonomous to remain at sea for months at a time. These could replace or augment existing oceanographic sampling systems, be used in border surveillance and security or offer a means of carbon neutral transportation. To achieve this represents a complex, multi-disciplinary challenge to boat designers and naval architects, systems/electrical engineers and computer scientists.  Since 2004 a series of competitions in the form of the Sailbot, World Robotic Sailing Championship and Microtransat competitions have sparked an explosion in the number of groups working on autonomous sailing robots. Despite this interest the longest distance sailed autonomously remains only a few hundred miles. Many of the challenges in building truly autonomous sailing robots still remain unsolved. These proceedings present the cutting edge of work in a variety of fields related to robotic sailing. They will be presented during the 5th International...

Development of an upwind sailing ergometer.

Science.gov (United States)

Callewaert, Margot; Geerts, Stefan; Lataire, Evert; Boone, Jan; Vantorre, Marc; Bourgois, Jan

2013-11-01

To develop a sailing ergometer that accurately simulates upwind sailing exercise. A sailing ergometer that measures roll moment accompanied by a biofeedback system that allows imposing a certain quasi-isometric upwind sailing protocol (ie, 18 bouts of 90-s hiking at constantly varying hiking intensity interspersed with 10 s to tack) was developed. Ten male high-level Laser sailors performed an incremental cycling test (ICT; ie, step protocol at 80 W + 40 W/3 min) and an upwind sailing test (UST). During both, heart rate (HR), oxygen uptake (VO(2)), ventilation (V(E)), respiratory-exchange ratio, and rating of perceived exertion were measured. During UST, also the difference between the required and produced hiking moment (HM) was calculated as error score (ES). HR, VO(2), and V(E) were calculated relative to their peak values determined during ICT. After UST, the subjects were questioned about their opinion on the resemblance between this UST and real-time upwind sailing. An average HM of 89.0% ± 2.2% HM(max) and an average ES of 4.1% ± 1.8% HM(max) were found. Mean HR, VO(2), and V(E) were, respectively, 80% ± 4% HR(peak), 39.5% ± 4.5% VO(2peak), and 30.3% ± 3.7% VE(peak). Both HM and cardiorespiratory values appear to be largely comparable to literature reports during on-water upwind sailing. Moreover, the subjects gave the upwind sailing ergometer a positive resemblance score. Results suggest that this ergometer accurately simulates on-water upwind sailing exercise. As such, this ergometer could be a great help in performance diagnostics and training follow-up.

A novel antibody-drug conjugate targeting SAIL for the treatment of hematologic malignancies.

Science.gov (United States)

Kim, S Y; Theunissen, J-W; Balibalos, J; Liao-Chan, S; Babcock, M C; Wong, T; Cairns, B; Gonzalez, D; van der Horst, E H; Perez, M; Levashova, Z; Chinn, L; D'Alessio, J A; Flory, M; Bermudez, A; Jackson, D Y; Ha, E; Monteon, J; Bruhns, M F; Chen, G; Migone, T-S

2015-05-29

Although several new therapeutic approaches have improved outcomes in the treatment of hematologic malignancies, unmet need persists in acute myeloid leukemia (AML), multiple myeloma (MM) and non-Hodgkin's lymphoma. Here we describe the proteomic identification of a novel cancer target, SAIL (Surface Antigen In Leukemia), whose expression is observed in AML, MM, chronic lymphocytic leukemia (CLL), diffuse large B-cell lymphoma (DLBCL) and follicular lymphoma (FL). While SAIL is widely expressed in CLL, AML, MM, DLBCL and FL patient samples, expression in cancer cell lines is mostly limited to cells of AML origin. We evaluated the antitumor activity of anti-SAIL monoclonal antibodies, 7-1C and 67-7A, conjugated to monomethyl auristatin F. Following internalization, anti-SAIL antibody-drug conjugates (ADCs) exhibited subnanomolar IC50 values against AML cell lines in vitro. In pharmacology studies employing AML cell line xenografts, anti-SAIL ADCs resulted in significant tumor growth inhibition. The restricted expression profile of this target in normal tissues, the high prevalence in different types of hematologic cancers and the observed preclinical activity support the clinical development of SAIL-targeted ADCs.

46 CFR 15.725 - Sailing short.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Sailing short. 15.725 Section 15.725 Shipping COAST... Limitations and Qualifying Factors § 15.725 Sailing short. Whenever a vessel is deprived of the service of a... vessel is sufficiently manned for the voyage. A report of sailing short must be filed in writing with the...

Space Environmental Effects on Candidate Solar Sail Materials

Science.gov (United States)

Edwards, David L.; Nehls, Mary; Semmel, Charles; Hovater, Mary; Gray, Perry; Hubbs, Whitney; Wertz, George

2004-01-01

The National Aeronautics and Space Administration's (NASA) Marshall Space Flight Center (MSFC) continues research into the utilization of photonic materials for spacecraft propulsion. Spacecraft propulsion, using photonic materials, will be achieved using a solar sail. A solar sail operates on the principle that photons, originating from the sun, impart pressure to the sail and therefore provide a source for spacecraft propulsion. The pressure imparted ot a solar sail can be increased, up to a factor of two, if the sun-facing surface is perfectly reflective. Therefore, these solar sails are generally composed of a highly reflective metallic sun-facing layer, a thin polymeric substrate and occasionally a highly emissive back surface. Near term solar sail propelled science missions are targeting the Lagrange point 1 (L1) as well as locations sunward of L1 as destinations. These near term missions include the Solar Polar Imager and the L1 Diamond. The Environmental Effects Group at NASA's Marshall Space Flight Center (MSFC) continues to actively characterize solar sail material in preparation for these near term solar sail missions. Previous investigations indicated that space environmental effects on sail material thermo-optical properties were minimal and would not significantly affect the propulsion efficiency of the sail. These investigations also indicated that the sail material mechanical stability degrades with increasing radiation exposure. This paper will further quantify the effect of space environmental exposure on the mechanical properties of candidate sail materials. Candidate sail materials for these missions include Aluminum coated Mylar, Teonex, and CP1 (Colorless Polyimide). These materials were subjected to uniform radiation doses of electrons and protons in individual exposures sequences. Dose values ranged from 100 Mrads to over 5 Grads. The engineering performance property responses of thermo-optical and mechanical properties were characterized

8th International Robotic Sailing Conference

CERN Document Server

Haug, Florian

2016-01-01

This book presents the cutting edge developments within a broad field related to robotic sailing. The contributions were presented during the 8th International Robotic Sailing Conference, which has taken place as a part of the 2015 World Robotic Sailing Championships in Mariehamn, Åland (Finland), August 31st – September 4th 2015. Since more than a decade, a series of competitions such as the World Robotic Sailing Championship have stimulated a variety of groups to work on research and development around autonomous sailing robots, which involves boat designers, naval architects, electrical engineers and computer scientists. While many of the challenges in building a truly autonomous sailboat are still unsolved, the books presents the state of the art of research and development within platform optimization, route and stability planning, collision avoidance, power management and boat control.

World Ships: The Solar-Photon Sail Option

Science.gov (United States)

Matloff, G. L.

The World Ship, a spacecraft large enough to simulate a small-scale terrestrial internal environment, may be the best feasible option to transfer members of a technological civilization between neighboring stars. Because of the projected size of these spacecraft, journey durations of ~1,000 years seem likely. One of the propulsion options for World Ships is the hyper-thin, likely space-manufactured solar-photon sail, unfurled as close to the migrating civilization's home star as possible. Because the sail and associated structure can be wound around the habitat while not in use, it represents the only known ultimately feasible interstellar propulsion system that can be applied for en route galactic-cosmic ray shielding as well as acceleration/ deceleration. This paper reviews the three suggested sail configurations that can be applied to world ship propulsion: parachute, hollow-body and hoop sails. Possible existing and advanced sail and structure materials and the predicted effects on the sail of the near-Sun space environment are reviewed. Consideration of solar-photon-sail World Ships also affects SETI (the Search for Extraterrestrial Intelligence). Can we detect such craft in flight? When in a star's lifetime is migration using such craft likely? What classes of stars are good candidates for solar-sail World-Ship searches?

Phobos/Deimos sample return via solar sail.

Science.gov (United States)

Matloff, Gregory L; Taylor, Travis; Powell, Conley; Moton, Tryshanda

2005-12-01

A sample-return mission to the Martian satellites using a con-temporary solar sail for all post-Earth-escape propulsion is proposed. The 0.015 kg/m(2) areal mass-thickness sail unfurls after launch and injection onto a Mars-bound Hohmann-transfer ellipse. Structure and payload increase spacecraft areal mass thickness to 0.028 kg/m(2). During the Mars encounter, the sail functions as a parachute in the outer atmosphere of Mars to accomplish aerocapture. On-board thrusters or the sail maneuver the spacecraft into an orbit with periapsis near Mars and apoapsis near Phobos. The orbit is circularized for Phobos-rendezvous; surface samples are collected. The sail then raises the orbit for Deimos-rendezvous and sample collection. The sail next places the spacecraft on an Earth-bound Hohmann-transfer ellipse. During Earth encounter, the sail accomplishes Earth-aerocapture or partially decelerates the sample container for entry into the Earth's atmosphere. Mission mass budget is about 218 grams and mission duration is less than five years.

7th International Robotic Sailing Conference

CERN Document Server

Tynan, Dermot

2015-01-01

An autonomous sailboat robot is a boat that only uses the wind on its sail as the propelling force, without remote control or human assistance to achieve its mission. Robotic sailing offers the potential of long range and long term autonomous wind propelled, solar or wave-powered carbon neutral devices. Robotic sailing devices could contribute to monitoring of environmental, ecological, meteorological, hydrographic and oceanographic data. These devices can also be used in traffic monitoring, border surveillance, security, assistance and rescue. The dependency on changing winds and sea conditions presents a considerable challenge for short and long term route and stability planning, collision avoidance and boat control. Building a robust and seaworthy sailing robot presents a truly complex and multi-disciplinary challenge for boat designers, naval architects, systems/electrical engineers and computer scientists. Over the last decade, several events such as Sailbot, World Robotic Sailing Championship and the In...

The leading-edge vortex of yacht sails

Science.gov (United States)

Arredondo-Galeana, Abel; Viola, Ignazio Maria

2017-11-01

We experimentally show, for the first time, that a stable Leading-Edge Vortex (LEV) can be formed on an asymmetric spinnaker, which is a high-lift sail used by yachts to sail downwind. We tested a 3D printed rigid sail in a water flume at a chord-based Reynolds number of ca. 104. We found that on the leeward side of the sail (the suction side), the flow separates at the leading edge reattaching further downstream and forming a stable LEV. The LEV grows in diameter from the root to the tip of the sail, where it merges with the tip vortex. We detected the LEV using the γ criterion, and we verified its stability over time. The lift contribution provided by the LEV was computed solving a complex potential model of each sail section. This analysis indicated that the LEV provides a substantial contribution to the total sail's lift. These findings suggest that the maximum lift of low-aspect-ratio wings with a sharp leading edge, such as spinnakers, can be enhanced by promoting a stable LEV. This work was funded by the Consejo Nacional de Ciencia y Tecnologia (CONACYT).

Developments of an Interactive Sail Design Method

OpenAIRE

S. M. Malpede; M. Vezza

2000-01-01

This paper presents a new tool for performing the integrated design and analysis of a sail. The features of the system are the geometrical definition of a sail shape, using the Bezier surface method, the creation of a finite element model for the non-linear structural analysis and a fluid-dynamic model for the aerodynamic analysis. The system has been developed using MATLAB(r). Recent sail design efforts have been focused on solving the aeroelastic behavior of the sail. The pressure dis...

A novel antibody–drug conjugate targeting SAIL for the treatment of hematologic malignancies

International Nuclear Information System (INIS)

Kim, S Y; Theunissen, J-W; Balibalos, J; Liao-Chan, S; Babcock, M C

2015-01-01

Although several new therapeutic approaches have improved outcomes in the treatment of hematologic malignancies, unmet need persists in acute myeloid leukemia (AML), multiple myeloma (MM) and non-Hodgkin's lymphoma. Here we describe the proteomic identification of a novel cancer target, SAIL (Surface Antigen In Leukemia), whose expression is observed in AML, MM, chronic lymphocytic leukemia (CLL), diffuse large B-cell lymphoma (DLBCL) and follicular lymphoma (FL). While SAIL is widely expressed in CLL, AML, MM, DLBCL and FL patient samples, expression in cancer cell lines is mostly limited to cells of AML origin. We evaluated the antitumor activity of anti-SAIL monoclonal antibodies, 7-1C and 67-7A, conjugated to monomethyl auristatin F. Following internalization, anti-SAIL antibody–drug conjugates (ADCs) exhibited subnanomolar IC 50 values against AML cell lines in vitro. In pharmacology studies employing AML cell line xenografts, anti-SAIL ADCs resulted in significant tumor growth inhibition. The restricted expression profile of this target in normal tissues, the high prevalence in different types of hematologic cancers and the observed preclinical activity support the clinical development of SAIL-targeted ADCs

A novel antibody–drug conjugate targeting SAIL for the treatment of hematologic malignancies

Science.gov (United States)

Kim, S Y; Theunissen, J-W; Balibalos, J; Liao-Chan, S; Babcock, M C; Wong, T; Cairns, B; Gonzalez, D; van der Horst, E H; Perez, M; Levashova, Z; Chinn, L; D‘Alessio, J A; Flory, M; Bermudez, A; Jackson, D Y; Ha, E; Monteon, J; Bruhns, M F; Chen, G; Migone, T-S

2015-01-01

Although several new therapeutic approaches have improved outcomes in the treatment of hematologic malignancies, unmet need persists in acute myeloid leukemia (AML), multiple myeloma (MM) and non-Hodgkin's lymphoma. Here we describe the proteomic identification of a novel cancer target, SAIL (Surface Antigen In Leukemia), whose expression is observed in AML, MM, chronic lymphocytic leukemia (CLL), diffuse large B-cell lymphoma (DLBCL) and follicular lymphoma (FL). While SAIL is widely expressed in CLL, AML, MM, DLBCL and FL patient samples, expression in cancer cell lines is mostly limited to cells of AML origin. We evaluated the antitumor activity of anti-SAIL monoclonal antibodies, 7-1C and 67-7A, conjugated to monomethyl auristatin F. Following internalization, anti-SAIL antibody–drug conjugates (ADCs) exhibited subnanomolar IC50 values against AML cell lines in vitro. In pharmacology studies employing AML cell line xenografts, anti-SAIL ADCs resulted in significant tumor growth inhibition. The restricted expression profile of this target in normal tissues, the high prevalence in different types of hematologic cancers and the observed preclinical activity support the clinical development of SAIL-targeted ADCs. PMID:26024286

Moving an asteroid with electric solar wind sail

Science.gov (United States)

Merikallio, S.; Janhunen, P.

2010-12-01

The electric solar wind sail (E-Sail) is a new propulsion method for interplanetary travel which was invented in 2006 and is currently under development. The E-Sail uses charged tethers to extract momentum from the solar wind particles to obtain propulsive thrust. According to current estimates, the E-Sail is 2-3 orders of magnitude better than traditional propulsion methods (chemical rockets and ion engines) in terms of produced lifetime-integrated impulse per propulsion system mass. Here we analyze the problem of using the E-Sail for directly deflecting an Earth-threatening asteroid. The problem then culminates into how to attach the E-Sail device to the asteroid. We assess alternative attachment strategies, namely straightforward direct towing with a cable and the gravity tractor method which works for a wider variety of situations. We also consider possible techniques to scale up the E-Sail force beyond the baseline one Newton level to deal with more imminent or larger asteroid or cometary threats. As a baseline case we consider an asteroid of effective diameter of 140 m and mass of 3 million tons, which can be deflected with a baseline 1 N E-Sail within 10 years. With a 5 N E-Sail the deflection could be achieved in 5 years. Once developed, the E-Sail would appear to provide a safe and reasonably low-cost way of deflecting dangerous asteroids and other heavenly bodies in cases where the collision threat becomes known several years in advance.

SAIL: automating interlibrary loan.

Science.gov (United States)

Lacroix, E M

1994-01-01

The National Library of Medicine (NLM) initiated the System for Automated Interlibrary Loan (SAIL) pilot project to study the feasibility of using imaging technology linked to the DOCLINE system to deliver copies of journal articles. During the project, NLM converted a small number of print journal issues to electronic form, linking the captured articles to the MEDLINE citation unique identifier. DOCLINE requests for these journals that could not be filled by network libraries were routed to SAIL. Nearly 23,000 articles from sixty-four journals recently selected for indexing in Index Medicus were scanned to convert them to electronic images. During fiscal year 1992, 4,586 scanned articles were used to fill 10,444 interlibrary loan (ILL) requests, and more than half of these were used only once. Eighty percent of all the articles were not requested at all. The total cost per article delivered was $10.76, substantially more than it costs to process a photocopy request. Because conversion costs were the major component of the total SAIL cost, and most of the articles captured for the project were not requested, this model was not cost-effective. Data on SAIL journal article use was compared with all ILL requests filled by NLM for the same period. Eighty-eight percent of all articles requested from NLM were requested only once. The results of the SAIL project demonstrated that converting journal articles to electronic images and storing them in anticipation of repeated requests would not meet NLM's objective to improve interlibrary loan. PMID:8004020

NanoSail - D Orbital and Attitude Dynamics

Science.gov (United States)

Heaton, Andrew F.; Faller, Brent F.; Katan, Chelsea K.

2013-01-01

NanoSail-D unfurled January 20th, 2011 and successfully demonstrated the deployment and deorbit capability of a solar sail in low Earth orbit. The orbit was strongly perturbed by solar radiation pressure, aerodynamic drag, and oblate gravity which were modeled using STK HPOP. A comparison of the ballistic coefficient history to the orbit parameters exhibits a strong relationship between orbital lighting, the decay rate of the mean semi-major axis and mean eccentricity. A similar comparison of mean solar area using the STK HPOP solar radiation pressure model exhibits a strong correlation of solar radiation pressure to mean eccentricity and mean argument of perigee. NanoSail-D was not actively controlled and had no capability on-board for attitude or orbit determination. To estimate attitude dynamics we created a 3-DOF attitude dynamics simulation that incorporated highly realistic estimates of perturbing forces into NanoSail-D torque models. By comparing the results of this simulation to the orbital behavior and ground observations of NanoSail-D, we conclude that there is a coupling between the orbit and attitude dynamics as well as establish approximate limits on the location of the NanoSail-D solar center of pressure. Both of these observations contribute valuable data for future solar sail designs and missions.

The effects of Poynting–Robertson drag on solar sails

Directory of Open Access Journals (Sweden)

F.A. Abd El-Salam

2018-06-01

Full Text Available In the present work, the concept of solar sailing and its developing spacecraft are presented. The effects of Poynting–Robertson drag on solar sails are considered. Some analytical control laws with some mentioned input constraints for optimizing solar sails dynamics in heliocentric orbit using Lagrange’s planetary equations are obtained. Optimum force vector in a required direction is maximized by deriving optimal sail cone angle. New control laws that maximize thrust to obtain certain required maximization in some particular orbital element are obtained. Keywords: Poynting–Robertson drag, Solar sail, Control laws, Optimal sail, Cone angle

Boltzmann electron PIC simulation of the E-sail effect

Directory of Open Access Journals (Sweden)

P. Janhunen

2015-12-01

Full Text Available The solar wind electric sail (E-sail is a planned in-space propulsion device that uses the natural solar wind momentum flux for spacecraft propulsion with the help of long, charged, centrifugally stretched tethers. The problem of accurately predicting the E-sail thrust is still somewhat open, however, due to a possible electron population trapped by the tether. Here we develop a new type of particle-in-cell (PIC simulation for predicting E-sail thrust. In the new simulation, electrons are modelled as a fluid, hence resembling hybrid simulation, but in contrast to normal hybrid simulation, the Poisson equation is used as in normal PIC to calculate the self-consistent electrostatic field. For electron-repulsive parts of the potential, the Boltzmann relation is used. For electron-attractive parts of the potential we employ a power law which contains a parameter that can be used to control the number of trapped electrons. We perform a set of runs varying the parameter and select the one with the smallest number of trapped electrons which still behaves in a physically meaningful way in the sense of producing not more than one solar wind ion deflection shock upstream of the tether. By this prescription we obtain thrust per tether length values that are in line with earlier estimates, although somewhat smaller. We conclude that the Boltzmann PIC simulation is a new tool for simulating the E-sail thrust. This tool enables us to calculate solutions rapidly and allows to easily study different scenarios for trapped electrons.

The solar sail: Current state of the problem

Science.gov (United States)

Polyakhova, Elena; Korolev, Vladimir

2018-05-01

Mathematical models of dynamics of the spacecraft with a solar sail to control orbital motion and rotation of the entire structureare considered. The movement of a spacecraftby a solar sail is based on the effect of light pressure. The magnitude and direction of the light pressure force vector is determined by the size and properties of the sail surface and the orientation angle relative to the sunlight flux. It is possible to vary the properties, sizes or locations of the sails to control the motion. Turning the elements of the sail, we get the opportunity to control the direction of the vector of the acting force and the moment with respect to the center of mass. Specificity of solar sail control is the interaction of orbital motion and rotational movements of the entire structure, which could provide the desired orientation and stability at small perturbations. The solar sail can be used for flights to the major planets, to meet with asteroids and comet, to realize a special desired motion in the neighborhood of the Sun or near the Earth.

Real-time sail and heading optimization for a surface sailing vessel by extremum seeking control

DEFF Research Database (Denmark)

Treichel, Kai; Jouffroy, Jerome

2010-01-01

In this paper we develop a simplified mathematical model representing the main elements of the behaviour of sailing vessels as a basis for simulation and controller design. For adaptive real-time optimization of the sail and heading angle we then apply extremum seeking control (which is a gradient...

Deployment Testing of the De-Orbit Sail Flight Hardware

OpenAIRE

Hillebrandt, Martin; Meyer, Sebastian; Zander, Martin; Hühne, Christian

2015-01-01

The paper describes the results of the deployment testing of the De-Orbit Sail flight hardware, a drag sail for de-orbiting applications, performed by DLR. It addresses in particular the deployment tests of the fullscale sail subsystem and deployment force tests performed on the boom deployment module. For the fullscale sail testing a gravity compensation device is used which is described in detail. It allows observations of the in-plane interaction of the booms with the sail membrane and the...

We'd rather be solar sailing

Science.gov (United States)

Kuznik, Frank

1994-06-01

On 4 Feb. 1993 a solar sail that traveled piggyback on a Progress resupply rocket to the Mir Space Station was deployed after undocking from the Mir. It was the first sun-propelled spacecraft, and it attempted to reflect a patch of sunlight onto the night side of Earth, but wasn't very successful because of extensive cloud cover. Solar sail technology and its historical development are briefly discussed. NASA'a views and the World Space Foundation's involvement in solar sail development are presented.

Adult Sail Sign: Radiographic and Computed Tomographic Features

Energy Technology Data Exchange (ETDEWEB)

Lee, Yu-Jin; Han, Daehee; Koh, Young Hwan; Zo, Joo Hee; Kim, Sang-Hyun; Kim, Deog Kyeom; Lee, Jeong Sang; Moon, Hyeon Jong; Kim, Jong Seung; Chun, Eun Ju; Youn, Byung Jae; Lee, Chang Hyun; Kim, Sam Soo (Dept. of Radiology, Cheil General Hospital, Kwandong Univ. College of Medicine, Seoul (KR))

2008-02-15

Background: The sail sign is a well-known radiographic feature of the pediatric chest. This sign can be observed in an adult population as well, but for a different reason. Purpose: To investigate the sail sign appearing in adult chest radiography. Material and Methods: Based on two anecdotal adult cases in which frontal chest radiographs showed the sail sign, we prospectively screened radiographs of 10,238 patients to determine the incidence of the sail sign found in adults in their 40s or older. The cause of the sail sign was assessed using computed tomography (CT). Results: The sail sign was revealed in 10 (seven males, three females; median age 60.6 years) of 10,238 patients. Of these 10 patients with a sail sign on frontal radiographs, eight underwent CT. The frontal radiographs of these 10 patients showed a concave superior margin toward the lung in nine patients, a concave inferior margin in five, and a double-lined inferior margin in three. Lateral radiographs disclosed a focal opacity over the minor fissure in five of six patients, which was either fuzzy (n = 4) or sharp (n = 1) in its upper margin, and was sometimes double lined in the inferior margin (n = 3). CT revealed the anterior mediastinal fat to be the cause of the radiographic sail sign, which stretched laterally from the mediastinum to insinuate into the minor fissure. Conclusion: The incidence of sail sign on adult chest radiographs is about 0.1%. The sign is specific enough to eliminate the need for more sophisticated imaging

Adult Sail Sign: Radiographic and Computed Tomographic Features

International Nuclear Information System (INIS)

Lee, Yu-Jin; Han, Daehee; Koh, Young Hwan; Zo, Joo Hee; Kim, Sang-Hyun; Kim, Deog Kyeom; Lee, Jeong Sang; Moon, Hyeon Jong; Kim, Jong Seung; Chun, Eun Ju; Y oun, Byung Jae; Lee, Chang Hyun; Kim, Sam Soo

2008-01-01

Background: The sail sign is a well-known radiographic feature of the pediatric chest. This sign can be observed in an adult population as well, but for a different reason. Purpose: To investigate the sail sign appearing in adult chest radiography. Material and Methods: Based on two anecdotal adult cases in which frontal chest radiographs showed the sail sign, we prospectively screened radiographs of 10,238 patients to determine the incidence of the sail sign found in adults in their 40s or older. The cause of the sail sign was assessed using computed tomography (CT). Results: The sail sign was revealed in 10 (seven males, three females; median age 60.6 years) of 10,238 patients. Of these 10 patients with a sail sign on frontal radiographs, eight underwent CT. The frontal radiographs of these 10 patients showed a concave superior margin toward the lung in nine patients, a concave inferior margin in five, and a double-lined inferior margin in three. Lateral radiographs disclosed a focal opacity over the minor fissure in five of six patients, which was either fuzzy (n = 4) or sharp (n = 1) in its upper margin, and was sometimes double lined in the inferior margin (n = 3). CT revealed the anterior mediastinal fat to be the cause of the radiographic sail sign, which stretched laterally from the mediastinum to insinuate into the minor fissure. Conclusion: The incidence of sail sign on adult chest radiographs is about 0.1%. The sign is specific enough to eliminate the need for more sophisticated imaging

Adult sail sign: radiographic and computed tomographic features.

Science.gov (United States)

Lee, Yu-Jin; Han, Daehee; Koh, Young Hwan; Zo, Joo Hee; Kim, Sang-Hyun; Kim, Deog Kyeom; Lee, Jeong Sang; Moon, Hyeon Jong; Kim, Jong Seung; Chun, Eun Ju; Youn, Byung Jae; Lee, Chang Hyun; Kim, Sam Soo

2008-02-01

The sail sign is a well-known radiographic feature of the pediatric chest. This sign can be observed in an adult population as well, but for a different reason. To investigate the sail sign appearing in adult chest radiography. Based on two anecdotal adult cases in which frontal chest radiographs showed the sail sign, we prospectively screened radiographs of 10,238 patients to determine the incidence of the sail sign found in adults in their 40s or older. The cause of the sail sign was assessed using computed tomography (CT). The sail sign was revealed in 10 (seven males, three females; median age 60.6 years) of 10,238 patients. Of these 10 patients with a sail sign on frontal radiographs, eight underwent CT. The frontal radiographs of these 10 patients showed a concave superior margin toward the lung in nine patients, a concave inferior margin in five, and a double-lined inferior margin in three. Lateral radiographs disclosed a focal opacity over the minor fissure in five of six patients, which was either fuzzy (n = 4) or sharp (n = 1) in its upper margin, and was sometimes double lined in the inferior margin (n = 3). CT revealed the anterior mediastinal fat to be the cause of the radiographic sail sign, which stretched laterally from the mediastinum to insinuate into the minor fissure. The incidence of sail sign on adult chest radiographs is about 0.1%. The sign is specific enough to eliminate the need for more sophisticated imaging.

System identification and the modeling of sailing yachts

Science.gov (United States)

Legursky, Katrina

This research represents an exploration of sailing yacht dynamics with full-scale sailing motion data, physics-based models, and system identification techniques. The goal is to provide a method of obtaining and validating suitable physics-based dynamics models for use in control system design on autonomous sailing platforms, which have the capacity to serve as mobile, long range, high endurance autonomous ocean sensing platforms. The primary contributions of this study to the state-of-the-art are the formulation of a five degree-of-freedom (DOF) linear multi-input multi-output (MIMO) state space model of sailing yacht dynamics, the process for identification of this model from full-scale data, a description of the maneuvers performed during on-water tests, and an analysis method to validate estimated models. The techniques and results described herein can be directly applied to and tested on existing autonomous sailing platforms. A full-scale experiment on a 23ft monohull sailing yacht is developed to collect motion data for physics-based model identification. Measurements include 3 axes of accelerations, velocities, angular rates, and attitude angles in addition to apparent wind speed and direction. The sailing yacht herein is treated as a dynamic system with two control inputs, the rudder angle, deltaR, and the mainsail angle, delta B, which are also measured. Over 20 hours of full scale sailing motion data is collected, representing three sail configurations corresponding to a range of wind speeds: the Full Main and Genoa (abbrev. Genoa) for lower wind speeds, the Full Main and Jib (abbrev. Jib) for mid-range wind speeds, and the Reefed Main and Jib (abbrev. Reef) for the highest wind speeds. The data also covers true wind angles from upwind through a beam reach. A physics-based non-linear model to describe sailing yacht motion is outlined, including descriptions of methods to model the aerodynamics and hydrodynamics of a sailing yacht in surge, sway, roll, and

SAIL--a software system for sample and phenotype availability across biobanks and cohorts.

Science.gov (United States)

Gostev, Mikhail; Fernandez-Banet, Julio; Rung, Johan; Dietrich, Joern; Prokopenko, Inga; Ripatti, Samuli; McCarthy, Mark I; Brazma, Alvis; Krestyaninova, Maria

2011-02-15

The Sample avAILability system-SAIL-is a web based application for searching, browsing and annotating biological sample collections or biobank entries. By providing individual-level information on the availability of specific data types (phenotypes, genetic or genomic data) and samples within a collection, rather than the actual measurement data, resource integration can be facilitated. A flexible data structure enables the collection owners to provide descriptive information on their samples using existing or custom vocabularies. Users can query for the available samples by various parameters combining them via logical expressions. The system can be scaled to hold data from millions of samples with thousands of variables. SAIL is available under Aferro-GPL open source license: https://github.com/sail.

Solar Sails: Sneaking up on Interstellar Travel

Science.gov (United States)

Johnson, L.

Throughout the world, government agencies, universities and private companies are developing solar sail propulsion systems to more efficiently explore the solar system and to enable science and exploration missions that are simply impossible to accomplish by any other means. Solar sail technology is rapidly advancing to support these demonstrations and missions, and in the process, is incrementally advancing one of the few approaches allowed by physics that may one day take humanity to the stars. Continuous solar pressure provides solar sails with propellantless thrust, potentially enabling them to propel a spacecraft to tremendous speeds ­ theoretically much faster than any present-day propulsion system. The next generation of sails will enable us to take our first real steps beyond the edge of the solar system, sending spacecraft out to distances of 1000 Astronomical Units, or more. In the farther term, the descendants of these first and second generation sails will augment their thrust by using high power lasers and enable travel to nearby stellar systems with flight times less than 500 years ­ a tremendous improvement over what is possible with conventional chemical rockets. By fielding these first solar sail systems, we are sneaking up on a capability to reach the stars.

Solar Sail Material Performance Property Response to Space Environmental Effects

Science.gov (United States)

Edwards, David L.; Semmel, Charles; Hovater, Mary; Nehls, Mary; Gray, Perry; Hubbs, Whitney; Wertz, George

2004-01-01

The National Aeronautics and Space Administration's (NASA) Marshall Space Flight Center (MSFC) continues research into the utilization of photonic materials for spacecraft propulsion. Spacecraft propulsion, using photonic materials, will be achieved using a solar sail. A solar sail operates on the principle that photons, originating from the sun, impart pressure to the sail and therefore provide a source for spacecraft propulsion. The pressure imparted to a solar sail can be increased, up to a factor of two, if the sun-facing surface is perfectly reflective. Therefore, these solar sails are generally composed of a highly reflective metallic sun-facing layer, a thin polymeric substrate and occasionally a highly emissive back surface. Near term solar sail propelled science missions are targeting the Lagrange point 1 (Ll) as well as locations sunward of L1 as destinations. These near term missions include the Solar Polar Imager and the L1 Diamond. The Environmental Effects Group at NASA s Marshall Space Flight Center (MSFC) continues to actively characterize solar sail material in preparation for these near term solar sail missions. Previous investigations indicated that space environmental effects on sail material thermo-optical properties were minimal and would not significantly affect the propulsion efficiency of the sail. These investigations also indicated that the sail material mechanical stability degrades with increasing radiation exposure. This paper will further quantify the effect of space environmental exposure on the mechanical properties of candidate sail materials. Candidate sail materials for these missions include Aluminum coated Mylar[TM], Teonex[TM], and CPl (Colorless Polyimide). These materials were subjected to uniform radiation doses of electrons and protons in individual exposures sequences. Dose values ranged from 100 Mrads to over 5 Grads. The engineering performance property responses of thermo-optical and mechanical properties were

Parametric Studies of Square Solar Sails Using Finite Element Analysis

Science.gov (United States)

Sleight, David W.; Muheim, Danniella M.

2004-01-01

Parametric studies are performed on two generic square solar sail designs to identify parameters of interest. The studies are performed on systems-level models of full-scale solar sails, and include geometric nonlinearity and inertia relief, and use a Newton-Raphson scheme to apply sail pre-tensioning and solar pressure. Computational strategies and difficulties encountered during the analyses are also addressed. The purpose of this paper is not to compare the benefits of one sail design over the other. Instead, the results of the parametric studies may be used to identify general response trends, and areas of potential nonlinear structural interactions for future studies. The effects of sail size, sail membrane pre-stress, sail membrane thickness, and boom stiffness on the sail membrane and boom deformations, boom loads, and vibration frequencies are studied. Over the range of parameters studied, the maximum sail deflection and boom deformations are a nonlinear function of the sail properties. In general, the vibration frequencies and modes are closely spaced. For some vibration mode shapes, local deformation patterns that dominate the response are identified. These localized patterns are attributed to the presence of negative stresses in the sail membrane that are artifacts of the assumption of ignoring the effects of wrinkling in the modeling process, and are not believed to be physically meaningful. Over the range of parameters studied, several regions of potential nonlinear modal interaction are identified.

Solar sails a novel approach to interplanetary travel

CERN Document Server

Vulpetti, Giovanni; Matloff, Gregory L

2015-01-01

The reality of sunlight-based sailing in space began in May 2010,  and solar sail technology and science have continued to evolve rapidly through new space missions. Using the power of the Sun's light for regular travel propulsion will be the next major leap forward in our journey to other worlds. This book is the second edition of the fascinating explanation of solar sails, how they work and how they will be used in the exploration of space. Updated with 35% new material, this second edition includes three new chapters on missions operated by Japan and the US, as well as projects that are in progress. The remainder of the book describes the heritage of exploration in water-borne sailing ships and the evolution to space-vehicle propulsion; as well as nuclear, solar-electric, nuclear-electric and antimatter rocket devices. It also discusses various sail systems that may use either sunlight or solar wind, and the design, fabrication and steering challenges associated with solar sails. The first edition was me...

Model and trajectory optimization for an ideal laser-enhanced solar sail

NARCIS (Netherlands)

Carzana (student TUDelft), Livio; Dachwald, Bernd; Noomen, R.

2017-01-01

A laser-enhanced solar sail is a solar sail that is not solely propelled by solar radiation but additionally by a laser beam that illuminates the sail. This way, the propulsive acceleration of the sail results from the combined action of the solar and the laser radiation pressure onto the sail. The

Simulated Space Environment Effects on a Candidate Solar Sail Material

Science.gov (United States)

Kang, Jin Ho; Bryant, Robert G.; Wilkie, W. Keats; Wadsworth, Heather M.; Craven, Paul D.; Nehls, Mary K.; Vaughn, Jason A.

2017-01-01

For long duration missions of solar sails, the sail material needs to survive harsh space environments and the degradation of the sail material controls operational lifetime. Therefore, understanding the effects of the space environment on the sail membrane is essential for mission success. In this study, we investigated the effect of simulated space environment effects of ionizing radiation, thermal aging and simulated potential damage on mechanical, thermal and optical properties of a commercial off the shelf (COTS) polyester solar sail membrane to assess the degradation mechanisms on a feasible solar sail. The solar sail membrane was exposed to high energy electrons (about 70 keV and 10 nA/cm2), and the physical properties were characterized. After about 8.3 Grad dose, the tensile modulus, tensile strength and failure strain of the sail membrane decreased by about 20 95%. The aluminum reflective layer was damaged and partially delaminated but it did not show any significant change in solar absorbance or thermal emittance. The effect on mechanical properties of a pre-cracked sample, simulating potential impact damage of the sail membrane, as well as thermal aging effects on metallized PEN (polyethylene naphthalate) film will be discussed.

Aerodynamic-structural model of offwind yacht sails

Science.gov (United States)

Mairs, Christopher M.

An aerodynamic-structural model of offwind yacht sails was created that is useful in predicting sail forces. Two sails were examined experimentally and computationally at several wind angles to explore a variety of flow regimes. The accuracy of the numerical solutions was measured by comparing to experimental results. The two sails examined were a Code 0 and a reaching asymmetric spinnaker. During experiment, balance, wake, and sail shape data were recorded for both sails in various configurations. Two computational steps were used to evaluate the computational model. First, an aerodynamic flow model that includes viscosity effects was used to examine the experimental flying shapes that were recorded. Second, the aerodynamic model was combined with a nonlinear, structural, finite element analysis (FEA) model. The aerodynamic and structural models were used iteratively to predict final flying shapes of offwind sails, starting with the design shapes. The Code 0 has relatively low camber and is used at small angles of attack. It was examined experimentally and computationally at a single angle of attack in two trim configurations, a baseline and overtrimmed setting. Experimentally, the Code 0 was stable and maintained large flow attachment regions. The digitized flying shapes from experiment were examined in the aerodynamic model. Force area predictions matched experimental results well. When the aerodynamic-structural tool was employed, the predictive capability was slightly worse. The reaching asymmetric spinnaker has higher camber and operates at higher angles of attack than the Code 0. Experimentally and computationally, it was examined at two angles of attack. Like the Code 0, at each wind angle, baseline and overtrimmed settings were examined. Experimentally, sail oscillations and large flow detachment regions were encountered. The computational analysis began by examining the experimental flying shapes in the aerodynamic model. In the baseline setting, the

A Deweyian Framework for Youth Development in Experiential Education: Perspectives from Sail Training and Sailing Instruction

Science.gov (United States)

Wojcikiewicz, Steven K.; Mural, Zachary B.

2010-01-01

In this piece, we put forth a Deweyian framework for youth development activities in outdoor and adventure education programs, and we show how such a framework may be exemplified by activities in sail training and sailing instruction. The paper begins with a discussion of the theoretical features of Deweyian educational experiences and makes…

Solar Sail Propulsion Technology Readiness Level Database

Science.gov (United States)

Adams, Charles L.

2004-01-01

The NASA In-Space Propulsion Technology (ISPT) Projects Office has been sponsoring 2 solar sail system design and development hardware demonstration activities over the past 20 months. Able Engineering Company (AEC) of Goleta, CA is leading one team and L Garde, Inc. of Tustin, CA is leading the other team. Component, subsystem and system fabrication and testing has been completed successfully. The goal of these activities is to advance the technology readiness level (TRL) of solar sail propulsion from 3 towards 6 by 2006. These activities will culminate in the deployment and testing of 20-meter solar sail system ground demonstration hardware in the 30 meter diameter thermal-vacuum chamber at NASA Glenn Plum Brook in 2005. This paper will describe the features of a computer database system that documents the results of the solar sail development activities to-date. Illustrations of the hardware components and systems, test results, analytical models, relevant space environment definition and current TRL assessment, as stored and manipulated within the database are presented. This database could serve as a central repository for all data related to the advancement of solar sail technology sponsored by the ISPT, providing an up-to-date assessment of the TRL of this technology. Current plans are to eventually make the database available to the Solar Sail community through the Space Transportation Information Network (STIN).

Sunlight reflection off the spacecraft with a solar sail on the surface of mars

Science.gov (United States)

Starinova, O. L.; Rozhkov, M. A.; Gorbunova, I. V.

2018-05-01

Modern technologies make it possible to fulfill many projects in the field of space exploration. One such project is the colonization of Mars and providing favorable conditions for living on it. Authors propose principles of functioning of the spacecraft with a solar sail, intended to create a thermal and light spot in a predetermined area of the Martian surface. This additional illumination can maintain and support certain climatic conditions on a small area where a Mars base could be located. This paper investigate the possibility of the spacecraft continuously reflect the sunlight off the solar sail on the small area of the Mars surface. The mathematical motion model in such condition of the solar sail's orientation is considered and used for motion simulation session. Moreover, the analysis of this motion is performed. Thus, were obtained parameters of the synchronic non-Keplerian orbit and spacecraft construction. In addition, were given recommendations for further applying satellites to reflect the sunlight on a planet's surface.

Independent sailing with high tetraplegia using sip and puff controls: integration into a community sailing center.

Science.gov (United States)

Rojhani, Solomon; Stiens, Steven A; Recio, Albert C

2017-07-01

We are continually rediscovering how adapted recreational activity complements the rehabilitation process, enriches patients' lives and positively impacts outcome measures. Although sports for people with spinal cord injuries (SCI) has achieved spectacular visibility, participation by high cervical injuries is often restricted due to poor accessibility, safety concerns, lack of adaptability, and high costs of technology. We endeavor to demonstrate the mechanisms, adaptability, accessibility, and benefits the sport of sailing creates in the rehabilitative process. Our sailor is a 27-year-old man with a history of traumatic SCI resulting in C4 complete tetraplegia. The participant completed an adapted introductory sailing course, and instruction on the sip-and-puff sail and tiller control mechanism. With practice, he navigated an on-water course in moderate winds of 5 to 15 knots. Despite trends toward shorter rehabilitation stays, aggressive transdisciplinary collaboration with recreation therapy can provide community and natural environment experiences while inpatient and continuing post discharge. Such peak physical and psychological experiences provide a positive perspective for the future that can be shared on the inpatient unit, with families and support systems like sailing clubs in the community. Rehabilitation theory directs a team process to achieve patient self-awareness and initiate self-actualization in spite of disablement. Utilization of local community sailing centers that have provided accessible assisted options provides person-centered self-realization of goals as assisted by family and natural supports. Such successful patients become native guides for others seeking the same experience.

The effects of Poynting-Robertson drag on solar sails

Science.gov (United States)

Abd El-Salam, F. A.

2018-06-01

In the present work, the concept of solar sailing and its developing spacecraft are presented. The effects of Poynting-Robertson drag on solar sails are considered. Some analytical control laws with some mentioned input constraints for optimizing solar sails dynamics in heliocentric orbit using Lagrange's planetary equations are obtained. Optimum force vector in a required direction is maximized by deriving optimal sail cone angle. New control laws that maximize thrust to obtain certain required maximization in some particular orbital element are obtained.

[A paraplegic skipper of his own sailing yacht].

Science.gov (United States)

Christians, U

1985-05-01

Drawing on personal experience, the author points out that paraplegics too are capable of independent sailing. Physical restrictions relative to on-board mobility, sail manoeuvring and change of sides can be made up for by structural adaptions and special techniques. Certain safety precautions are indispensable. The sailing performance of paraplegics compares with that of ablebodied sailors, and cruising under a paraplegic skipper's responsibility is certainly possible.

Flowing Plasma Interaction with an Electric Sail Tether Element

Science.gov (United States)

Schneider, Todd; Vaughn, Jason; Wright, Kenneth; Anderson, Allen; Stone, Nobie

2017-01-01

Harnessing the power of the solar wind, an Electric Sail, or E-sail, is a relatively new concept that promises to deliver high speed propellant-less propulsion. The electric sail is an invention made in 2006 at the Kumpula Space Centre in Finland by Pekka Janhunen [Janhunen and Sandroos, 2007]. At its core, an electric sail utilizes multiple positively biased tethers which exchange momentum with solar wind protons via the repelling electric field established around each tether, in other words, by reflecting the solar wind protons. Recognizing the solar wind is a plasma, the effective repelling area of each tether is increased significantly by the formation a plasma sheath around each tether. Fig. 1 shows schematically a spacecraft employing an electric sail. The positive voltage bias (greater than10kV) applied to each tether naturally results in electron collection. Therefore, the electric sail concept necessarily includes an electron source (electron gun) to return collected electrons to space and maintain the positive bias of the tether system.

Multiple NEO Rendezvous Using Solar Sail Propulsion

Science.gov (United States)

Johnson, Les; Alexander, Leslie; Fabisinski, Leo; Heaton, Andy; Miernik, Janie; Stough, Rob; Wright, Roosevelt; Young, Roy

2012-01-01

The NASA Marshall Space Flight Center (MSFC) Advanced Concepts Office performed an assessment of the feasibility of using a near-term solar sail propulsion system to enable a single spacecraft to perform serial rendezvous operations at multiple Near Earth Objects (NEOs) within six years of launch on a small-to-moderate launch vehicle. The study baselined the use of the sail technology demonstrated in the mid-2000 s by the NASA In-Space Propulsion Technology Project and is scheduled to be demonstrated in space by 2014 as part of the NASA Technology Demonstration Mission Program. The study ground rules required that the solar sail be the only new technology on the flight; all other spacecraft systems and instruments must have had previous space test and qualification. The resulting mission concept uses an 80-m X 80-m 3-axis stabilized solar sail launched by an Athena-II rocket in 2017 to rendezvous with 1999 AO10, Apophis and 2001 QJ142. In each rendezvous, the spacecraft will perform proximity operations for approximately 30 days. The spacecraft science payload is simple and lightweight; it will consist of only the multispectral imager flown on the Near Earth Asteroid Rendezvous (NEAR) mission to 433 Eros and 253 Mathilde. Most non-sail spacecraft systems are based on the Messenger mission spacecraft. This paper will describe the objectives of the proposed mission, the solar sail technology to be employed, the spacecraft system and subsystems, as well as the overall mission profile.

Near Earth Asteroid Solar Sail Engineering Development Unit Test Program

Science.gov (United States)

Lockett, Tiffany Russell; Few, Alexander; Wilson, Richard

2017-01-01

The Near Earth Asteroid (NEA) Scout project is a 30x20x10cm (6U) cubesat reconnaissance mission to investigate a near Earth asteroid utilizing an 86m2 solar sail as the primary propulsion system. This will be the largest solar sail NASA will launch to date. NEA Scout is a secondary payload currently manifested on the maiden voyage of the Space Launch System in 2018. In development of the solar sail subsystem, design challenges were identified and investigated for packaging within a 6U form factor and deployment in cis-lunar space. Analysis furthered understanding of thermal, stress, and dynamics of the stowed system and matured an integrated sail membrane model for deployed flight dynamics. This paper will address design, fabrication, and lessons learned from the NEA Scout solar sail subsystem engineering development unit. From optical properties of the sail material to folding and spooling the single 86m2 sail, the team has developed a robust deployment system for the solar sail. This paper will also address expected and received test results from ascent vent, random vibration, and deployment tests.

Laboratory Facility for Simulating Solar Wind Sails

International Nuclear Information System (INIS)

Funaki, Ikkoh; Ueno, Kazuma; Oshio, Yuya; Ayabe, Tomohiro; Horisawa, Hideyuki; Yamakawa, Hiroshi

2008-01-01

Magnetic sail (MagSail) is a deep space propulsion system, in which an artificial magnetic cavity captures the energy of the solar wind to propel a spacecraft in the direction leaving the sun. For a scale-model experiment of the plasma flow of MagSail, we employed a magnetoplasmadynamic arcjet as a solar wind simulator. It is observed that a plasma flow from the solar wind simulator reaches a quasi-steady state of about 0.8 ms duration after a transient phase when initiating the discharge. During this initial phase of the discharge, a blast-wave was observed to develop radially in a vacuum chamber. When a solenoidal coil (MagSail scale model) is immersed into the quasi-steady flow where the velocity is 45 km/s, and the number density is 10 19 m-3, a bow shock as well as a magnetic cavity were formed in front of the coil. As a result of the interaction between the plasma flow and the magnetic cavity, the momentum of the simulated solar wind is decreased, and it is found from the thrust measurement that the solar wind momentum is transferred to the coil simulating MagSail.

Hiking strap force decreases during sustained upwind sailing

DEFF Research Database (Denmark)

Buchardt, R; Bay, Jonathan; Bojsen-Møller, Jens

2017-01-01

The hypothesis, that sailing upwind in wind speeds above 12 knots causes fatigue, which manifests as a reduction in exerted hiking strap force and/or maximal isometric voluntary contraction force (MVC) of the knee extensors, was evaluated. Additionally, it was investigated if a relationship exists...... between maximal exerted hiking force (hMVC) and sailing performance. In part 1 of the study, 12 national level athletes sailed upwind for 2 × 10 min while hiking strap forces were continuously acquired. Before, in between and after sailing periods, the MVC of the knee extensors was measured. In part 2...... of the study, hMVC was measured dry land in a hiking bench and correlated with the overall results at a national championship. Hiking strap force decreased from the first to the last minute in both 10 min sailing periods (430 ± 131 vs. 285 ± 130 N, P 

Numerical analysis of orbital transfers to Mars using solar sails and attitude control

Science.gov (United States)

Pereira, M. C.; de Melo, C. F.; Meireles, L. G.

2017-10-01

Solar sails present a promising alternative method of propulsion for the coming phases of the space exploration. With the recent advances in materials engineering, the construction of lighter and more resistant materials capable of impelling spaceships with the use of solar radiation pressure has become increasingly viable technologically and economically. The studies, simulations and analysis of orbital transfers from Earth to Mars proposed in this work were implemented considering the use of a flat solar sail. Maneuvers considering the delivery of a sailcraft from a Low Earth Orbit to the border of the Earth’s sphere of influence and interplanetary trajectories to Mars were investigated. A set of simulations were implemented varying the attitude of the sail relative to the Sun. Results show that a sailcraft can carry out transfers with final velocity with respect to Mars smaller than the interplanetary Patched-conic approximation, although this requires a longer time of transfers, provided the attitude of the sailcraft relative to the Sun can be controlled in some points of the trajectories.

Findings from NASA's 2015-2017 Electric Sail Investigations

Science.gov (United States)

Wiegmann, Bruce. M.

2017-01-01

Electric Sail (E-Sail) propulsion systems will enable scientific spacecraft to obtain velocities of up to 10 astronomical units per year without expending any on-board propellant. The E-Sail propulsion is created from the interaction of a spacecraft's positively charged multi-kilometer-length conductor/s with protons that are present in the naturally occurring hypersonic solar wind. The protons are deflected via natural electrostatic repulsion forces from the Debye sheath that is formed around a charged wire in space, and this deflection of protons creates thrust or propulsion in the opposite direction. It is envisioned that this E-Sail propulsion system can provide propulsion throughout the solar system and to the heliosphere and beyond. Consistent with the concept of a "sail," no propellant is needed as electrostatic repulsion interactions between the naturally occurring solar wind protons and a positively charged wire creates the propulsion. The basic principle on which the Electric Sail operates is the exchange of momentum between an "electric sail" and solar wind, which continually flows radially away from the sun at speeds ranging from 300 to 700 kilometers per second. The "sail" consists of an array of long, charged wires which extend radially outward 10 to 30 kilometers from a slowly rotating spacecraft. Momentum is transferred from the solar wind to the array through the deflection of the positively charged solar wind protons by a high voltage potential applied to the wires. The thrust generated by an E-Sail is proportional to the area of the sail, which is given by the product of the total length of the wires and the effective wire diameter. The wire is approximately 0.1 millimeters in diameter. However, the effective diameter is determined by the distance the applied electric potential penetrates into space around the wire (on the order of 10 meters at 1 astronomical unit). As a result, the effective area over which protons are repelled is proportional

Synthesis of stereoarray isotope labeled (SAIL) lysine via the "head-to-tail" conversion of SAIL glutamic acid.

Science.gov (United States)

Terauchi, Tsutomu; Kamikawai, Tomoe; Vinogradov, Maxim G; Starodubtseva, Eugenia V; Takeda, Mitsuhiro; Kainosho, Masatsune

2011-01-07

A stereoarray isotope labeled (SAIL) lysine, (2S,3R,4R,5S,6R)-[3,4,5,6-(2)H(4);1,2,3,4,5,6-(13)C(6);2,6-(15)N(2)]lysine, was synthesized by the "head-to-tail" conversion of SAIL-Glu, (2S,3S,4R)-[3,4-(2)H(2);1,2,3,4,5-(13)C(5);2-(15)N]glutamic acid, with high stereospecificities for all five chiral centers. With the SAIL-Lys in hand, the unambiguous simultaneous stereospecific assignments were able to be established for each of the prochiral protons within the four methylene groups of the Lys side chains in proteins.

Fluid-structure interaction analysis of deformation of sail of 30-foot yacht

Science.gov (United States)

Bak, Sera; Yoo, Jaehoon; Song, Chang Yong

2013-06-01

Most yacht sails are made of thin fabric, and they have a cambered shape to generate lift force; however, their shape can be easily deformed by wind pressure. Deformation of the sail shape changes the flow characteristics over the sail, which in turn further deforms the sail shape. Therefore, fluid-structure interaction (FSI) analysis is applied for the precise evaluation or optimization of the sail design. In this study, fluid flow analyses are performed for the main sail of a 30-foot yacht, and the results are applied to loading conditions for structural analyses. By applying the supporting forces from the rig, such as the mast and boom-end outhaul, as boundary conditions for structural analysis, the deformed sail shape is identified. Both the flow analyses and the structural analyses are iteratively carried out for the deformed sail shape. A comparison of the flow characteristics and surface pressures over the deformed sail shape with those over the initial shape shows that a considerable difference exists between the two and that FSI analysis is suitable for application to sail design.

Fluid-structure interaction analysis of deformation of sail of 30-foot yacht

Directory of Open Access Journals (Sweden)

Sera Bak

2013-06-01

Full Text Available Most yacht sails are made of thin fabric, and they have a cambered shape to generate lift force; however, their shape can be easily deformed by wind pressure. Deformation of the sail shape changes the flow characteristics over the sail, which in turn further deforms the sail shape. Therefore, fluid-structure interaction (FSI analysis is applied for the precise evaluation or optimization of the sail design. In this study, fluid flow analyses are performed for the main sail of a 30-foot yacht, and the results are applied to loading conditions for structural analyses. By applying the supporting forces from the rig, such as the mast and boom-end outhaul, as boundary conditions for structural analysis, the deformed sail shape is identified. Both the flow analyses and the structural analyses are iteratively carried out for the deformed sail shape. A comparison of the flow characteristics and surface pressures over the deformed sail shape with those over the initial shape shows that a considerable difference exists between the two and that FSI analysis is suitable for application to sail design.

Orbital Dynamics of an Oscillating Sail in the Earth-Moon System

NARCIS (Netherlands)

Heiligers, M.J.; Ceriotti, M.

2017-01-01

The oscillating sail is a novel solar sail configuration where a triangular sail is released at a deflected angle with respect to the Sun-direction. As a result, the sail will conduct an undamped oscillating motion around the Sun-line due to the offset between the centre-of-pressure and

Drift-free solar sail formations in elliptical Sun-synchronous orbits

Science.gov (United States)

Parsay, Khashayar; Schaub, Hanspeter

2017-10-01

To study the spatial and temporal variations of plasma in the highly dynamic environment of the magnetosphere, multiple spacecraft must fly in a formation. The objective for this study is to investigate the feasibility of solar sail formation flying in the Earth-centered, Sun-synchronous orbit regime. The focus of this effort is to enable formation flying for a group of solar sails that maintain a nominally fixed Sun-pointing attitude during formation flight, solely for the purpose of precessing their orbit apse lines Sun-synchronously. A fixed-attitude solar sail formation is motivated by the difficulties in the simultaneous control of orbit and attitude in flying solar sails. First, the secular rates of the orbital elements resulting from the effects of solar radiation pressure (SRP) are determined using averaging theory for a Sun-pointing attitude sail. These averaged rates are used to analytically derive the first-order necessary conditions for a drift-free solar sail formation in Sun-synchronous orbits, assuming a fixed Sun-pointing orientation for each sail in formation. The validity of the first-order necessary conditions are illustrated by designing quasi-periodic relative motions. Next, nonlinear programming is applied to design truly drift-free two-craft solar sail formations. Lastly, analytic expressions are derived to determine the long-term dynamics and sensitivity of the formation with respect to constant attitude errors, uncertainty in orbital elements, and uncertainty in a sail's characteristic acceleration.

Invariant Solar Sail Formations in Elliptical Sun-Synchronous Orbits

Science.gov (United States)

Parsay, Khashayar

Current and past missions that study the Earth's geomagnetic tail require multiple spacecraft to fly in formation about a highly eccentric Keplerian reference orbit that has its apogee inside a predefined science region of interest. Because the geomagnetic tail is directed along the Sun-Earth line and therefore rotates annually, inertially fixed Keplerian orbits are only aligned with the geomagnetic tail once per year. This limitation reduces the duration of the science phase to less than a few months annually. Solar sails are capable of creating non-Keplerian, Sun-synchronous orbits that rotate with the geomagnetic tail. A solar sail flying in a Sun-synchronous orbit will have a continuous presence in the geomagnetic tail throughout the entire year, which significantly improves the in situ observations of the magnetosphere. To achieve a Sun-synchronous orbit, a solar sail is required to maintain a Sun-pointing attitude, which leads to the artificial precession of the orbit apse line in a Sun-synchronous manner, leaving the orbit apogee inside the science region of interest throughout entire the year. To study the spatial and temporal variations of plasma in the highly dynamic environment of the magnetosphere, multiple spacecraft must fly in a formation. The objective for this dissertation is to investigate the feasibility of solar sail formation flying in the Earth-centered, Sun-synchronous orbit regime. The focus of this effort is to enable formation flying for a group of solar sails that maintain a nominally fixed Sun-pointing attitude during formation flight, solely for the purpose of precessing their orbit apse lines Sun-synchronously. A fixed-attitude solar sail formation is motivated by the difficulties in the simultaneous control of orbit and attitude in flying solar sails. First, the secular rates of the orbital elements resulting from the effects of solar radiation pressure (SRP) are determined using averaging theory for a Sun-pointing attitude sail

Near Earth Asteroid Scout Solar Sail Engineering Development Unit Test Suite

Science.gov (United States)

Lockett, Tiffany Russell; Few, Alexander; Wilson, Richard

2017-01-01

The Near Earth Asteroid (NEA) Scout project is a 6U reconnaissance mission to investigate a near Earth asteroid utilizing an 86m(sub 2) solar sail as the primary propulsion system. This will be the largest solar sail NASA has launched to date. NEA Scout is currently manifested on the maiden voyage of the Space Launch System in 2018. In development of the solar sail subsystem, design challenges were identified and investigated for packaging within a 6U form factor and deployment in cis-lunar space. Analysis was able to capture understanding of thermal, stress, and dynamics of the stowed system as well as mature an integrated sail membrane model for deployed flight dynamics. Full scale system testing on the ground is the optimal way to demonstrate system robustness, repeatability, and overall performance on a compressed flight schedule. To physically test the system, the team developed a flight sized engineering development unit with design features as close to flight as possible. The test suite included ascent vent, random vibration, functional deployments, thermal vacuum, and full sail deployments. All of these tests contributed towards development of the final flight unit. This paper will address several of the design challenges and lessons learned from the NEA Scout solar sail subsystem engineering development unit. Testing on the component level all the way to the integrated subsystem level. From optical properties of the sail material to fold and spooling the single sail, the team has developed a robust deployment system for the solar sail. The team completed several deployments of the sail system in preparation for flight at half scale (4m) and full scale (6.8m): boom only, half scale sail deployment, and full scale sail deployment. This paper will also address expected and received test results from ascent vent, random vibration, and deployment tests.

Near Earth Asteroid Scout: NASA's Solar Sail Mission to a NEA

Science.gov (United States)

Johnson, Les; Lockett, Tiffany

2017-01-01

NASA is developing a solar sail propulsion system for use on the Near Earth Asteroid (NEA) Scout reconnaissance mission and laying the groundwork for their use in future deep space science and exploration missions. Solar sails use sunlight to propel vehicles through space by reflecting solar photons from a large, mirror-like sail made of a lightweight, highly reflective material. This continuous photon pressure provides propellantless thrust, allowing for very high Delta V maneuvers on long-duration, deep space exploration. Since reflected light produces thrust, solar sails require no onboard propellant. The Near Earth Asteroid (NEA) Scout mission, funded by NASA's Advanced Exploration Systems Program and managed by NASA MSFC, will use the sail as primary propulsion allowing it to survey and image Asteroid 1991VG and, potentially, other NEA's of interest for possible future human exploration. NEA Scout uses a 6U cubesat (to be provided by NASA's Jet Propulsion Laboratory), an 86 m(exp. 2) solar sail and will weigh less than 12 kilograms. NEA Scout will be launched on the first flight of the Space Launch System in 2018. The solar sail for NEA Scout will be based on the technology developed and flown by the NASA NanoSail-D and The Planetary Society's Lightsail-A. Four approximately 7 m stainless steel booms wrapped on two spools (two overlapping booms per spool) will be motor deployed and pull the sail from its stowed volume. The sail material is an aluminized polyimide approximately 2.5 microns thick. As the technology matures, solar sails will increasingly be used to enable science and exploration missions that are currently impossible or prohibitively expensive using traditional chemical and electric propulsion systems. This paper will summarize the status of the NEA Scout mission and solar sail technology in general.

A first course in optimum design of yacht sails

Science.gov (United States)

Sugimoto, Takeshi

1993-03-01

The optimum sail geometry is analytically obtained for the case of maximizing the thrust under equality and inequality constraints on the lift and the heeling moment. A single mainsail is assumed to be set close-hauled in uniform wind and upright on the flat sea surface. The governing parameters are the mast height and the gap between the sail foot and the sea surface. The lifting line theory is applied to analyze the aerodynamic forces acting on a sail. The design method consists of the variational principle and a feasibility study. Almost triangular sails are found to be optimum. Their advantages are discussed.

FASt - An autonomous sailing platform for oceanographic missions

OpenAIRE

Jose C Alves; Nuno A Cruz

2008-01-01

Sailing has been for long times the only means of ship propulsion at sea. Although the performance of a sailing vessel is well below the present power driven ships, either in terms of navigation speed and predictability, wind energy is absolutely renewable, clean and free. Unmanned autonomous sailing boats may exhibit a virtually unlimited autonomy and be able to perform unassisted missions at sea for long periods of time. Promising applications include oceanographic and weather data collecti...

Dynamics and Control of a Flexible Solar Sail

OpenAIRE

Jiafu Liu; Siyuan Rong; Fan Shen; Naigang Cui

2014-01-01

Solar sail can merely make use of solar radiation pressure (SRP) force as the thrust for space missions. The attitude dynamics is obtained for the highly flexible solar sail with control vanes, sliding masses, and a gimbaled control boom. The vibration equations are derived considering the geometric nonlinearity of the sail structure subjected to the forces generated by the control vanes, solar radiation pressure (SRP), and sliding masses. Then the dynamic models for attitude/vibration contr...

Displaced Electric Sail Orbits Design and Transition Trajectory Optimization

Directory of Open Access Journals (Sweden)

Naiming Qi

2014-01-01

Full Text Available Displaced orbits for spacecraft propelled by electric sails are investigated as an alternative to the use of solar sails. The orbital dynamics of electric sails based spacecraft are studied within a spherical coordinate system, which permits finding the solutions of displaced electric sail orbits and optimize transfer trajectory. Transfer trajectories from Earth's orbit to displaced orbit are also studied in an optimal framework, by using genetic algorithm and Gauss pseudospectral method. The initial guesses for the state and control histories used in the Gauss pseudospectral method are interpolated from the best solution of a genetic algorithm. Numerical simulations show that the electric sail is able to perform the transfer from Earth’s orbit to displaced orbit in acceptable time, and the hybrid optimization method has the capability to search the feasible and optimal solution without any initial value guess.

Model and trajectory optimization for an ideal laser-enhanced solar sail

OpenAIRE

Carzana (student TUDelft), Livio; Dachwald, Bernd; Noomen, R.

2017-01-01

A laser-enhanced solar sail is a solar sail that is not solely propelled by solar radiation but additionally by a laser beam that illuminates the sail. This way, the propulsive acceleration of the sail results from the combined action of the solar and the laser radiation pressure onto the sail. The potential source of the laser beam is a laser satellite that coverts solar power (in the inner solar system) or nuclear power (in the outer solar system) into laser power. Such a laser satellite (o...

School-Based Adolescent Groups: The Sail Model.

Science.gov (United States)

Thompson, John L.; And Others

The manual outlines the processes, policies, and actual program implementation of one component of a Minnesota program for emotionally disturbed adolescents (Project SAIL): the development of school-based therapy/intervention groups. The characteristics of SAIL students are described, and some considerations involved in providing group services…

Sailing: Cognition, action, communication

Directory of Open Access Journals (Sweden)

Thora Tenbrink

2017-12-01

Full Text Available How do humans perceive and think about space, and how can this be represented adequately? For everyday activities such as locating objects or places, route planning, and the like, many insights have been gained over the past few decades, feeding into theories of spatial cognition and frameworks for spatial information science. In this paper, we explore sailing as a more specialized domain that has not yet been considered in this way, but has a lot to offer precisely because of its peculiarities. Sailing involves ways of thinking about space that are not normally required (or even acquired in everyday life. Movement in this domain is based on a combination of external forces and internal (human intentions that impose various kinds of directionality, affecting local action as well as global planning. Sailing terminology is spatial to a high extent, and involves a range of concepts that have received little attention in the spatial cognition community. We explore the area by focusing on the core features of cognition, action, and communication, and suggest a range of promising future areas of research in this domain as a showcase of the fascinating flexibility of human spatial cognition.

Design of Sail-Assisted Unmanned Surface Vehicle Intelligent Control System

OpenAIRE

Ma, Yong; Zhao, Yujiao; Diao, Jiantao; Gan, Langxiong; Bi, Huaxiong; Zhao, Jingming

2016-01-01

To achieve the wind sail-assisted function of the unmanned surface vehicle (USV), this work focuses on the design problems of the sail-assisted USV intelligent control systems (SUICS) and illustrates the implementation process of the SUICS. The SUICS consists of the communication system, the sensor system, the PC platform, and the lower machine platform. To make full use of the wind energy, in the SUICS, we propose the sail angle of attack automatic adjustment (Sail_4A) algorithm and present ...

Scale-model Experiment of Magnetoplasma Sail for Future Deep Space Missions

International Nuclear Information System (INIS)

Funaki, Ikkoh; Yamakawa, Hiroshi; Ueno, Kazuma; Kimura, Toshiyuki; Ayabe, Tomohiro; Horisawa, Hideyuki

2008-01-01

When Magnetic sail (MagSail) spacecraft is operated in space, the supersonic solar wind plasma flow is blocked by an artificially produced magnetic cavity to accelerate the spacecraft in the direction leaving the Sun. To evaluate the momentum transferring process from the solar wind to the coil onboard the MagSail spacecraft, we arranged a laboratory experiment of MagSail spacecraft. Based on scaling considerations, a solenoidal coil was immersed into the plasma flow from a magnetoplasmadynamic arcjet in a quasi-steady mode of about 1 ms duration. In this setup, it is confirmed that a magnetic cavity, which is similar to that of the geomagnetic field, was formed around the coil to produce thrust in the ion Larmor scale interaction. Also, the controllability of magnetic cavity size by a plasma jet from inside the coil of MagSail is demonstrated, although the thrust characteristic of the MagSail with plasma jet, which is so called plasma sail, is to be clarified in our next step

Development of a Motion System for an Advanced Sailing Simulator

NARCIS (Netherlands)

Mulder, F.A.; Verlinden, J.C.

2013-01-01

To train competitive sailing in a virtual setting, motion of the boat as well as haptic feedback of the sail lines is essential. When discussing virtual environments (VEs) the concept of presence is often used. In this study we develop a sailing simulator motion system to research what factors

A basic tool for computer-aided sail design

International Nuclear Information System (INIS)

Thrasher, D.F.; Dunyak, T.J.; Mook, D.T.; Nayfeh, A.H.

1985-01-01

Recent developments in modelling lifting surfaces have provided a tool that also can be used to model sails. The simplest of the adequate models is the vortex-lattice method. This method can fully account for the aerodynamic interactions among several lifting surfaces having arbitrary platforms, camber, and twist as long as separation occurs only along the edges and the phenomenon known as vortex bursting does not occur near the sails. This paper describes this method and how it can be applied to the design of sails

Accelerator-Based PIXE and STIM Analysis of Candidate Solar Sail Materials

International Nuclear Information System (INIS)

Hollerman, W.A.; Stanaland, T.L.; Boudreaux, P.; Elberson, L.; Fontenot, J.; Gates, E.; Greco, R.; McBride, M.; Woodward, A.; Edwards, D.

2003-01-01

Solar sailing is a unique form of propulsion where a spacecraft gains momentum from incident photons. A totally reflective sail experiences a pressure of 9.1 μPa at a distance of 1 AU from the Sun. Since sails are not limited by reaction mass, they provide continual acceleration, reduced only by the lifetime of the lightweight film in the space environment and the distance to the Sun. Practical solar sails can expand the number of possible missions, enabling new concepts that are difficult by conventional means. One of the current challenges is to develop strong, lightweight, and radiation resistant sail materials. This paper will discuss initial results from a Particle Induced X-Ray Emission (PIXE) and Scanning Transmission Ion Microscopy (STIM) analysis of candidate solar sail materials

Solar and Drag Sail Propulsion: From Theory to Mission Implementation

Science.gov (United States)

Johnson, Les; Alhorn, Dean; Boudreaux, Mark; Casas, Joe; Stetson, Doug; Young, Roy

2014-01-01

Solar and drag sail technology is entering the mainstream for space propulsion applications within NASA and around the world. Solar sails derive propulsion by reflecting sunlight from a large, mirror- like sail made of a lightweight, reflective material. The continuous sunlight pressure provides efficient primary propulsion, without the expenditure of propellant or any other consumable, allowing for very high V maneuvers and long-duration deep space exploration. Drag sails increase the aerodynamic drag on Low Earth Orbit (LEO) spacecraft, providing a lightweight and relatively inexpensive approach for end-of-life deorbit and reentry. Since NASA began investing in the technology in the late 1990's, significant progress has been made toward their demonstration and implementation in space. NASA's Marshall Space Flight Center (MSFC) managed the development and testing of two different 20-m solar sail systems and rigorously tested them under simulated space conditions in the Glenn Research Center's Space Power Facility at Plum Brook Station, Ohio. One of these systems, developed by L'Garde, Inc., is planned for flight in 2015. Called Sunjammer, the 38m sailcraft will unfurl in deep space and demonstrate solar sail propulsion and navigation as it flies to Earth-Sun L1. In the Flight Center (MSFC) managed the development and testing of two different 20-m solar sail systems and rigorously tested them under simulated space conditions in the Glenn Research Center's Space Power Facility at Plum Brook Station, Ohio. One of these systems, developed by L'Garde, Inc., is planned for flight in 2015. Called Sunjammer, the 38m sailcraft will unfurl in deep space and demonstrate solar sail propulsion and navigation as it flies to Earth-Sun L1. In the interim, NASA MSFC funded the NanoSail-D, a subscale drag sail system designed for small spacecraft applications. The NanoSail-D flew aboard the Fast Affordable Science and Technology SATellite (FASTSAT) in 2010, also developed by MSFC

MODEL CORRELATION STUDY OF A RETRACTABLE BOOM FOR A SOLAR SAIL SPACECRAFT

Science.gov (United States)

Adetona, O.; Keel, L. H.; Oakley, J. D.; Kappus, K.; Whorton, M. S.; Kim, Y. K.; Rakpczy, J. M.

2005-01-01

To realize design concepts, predict dynamic behavior and develop appropriate control strategies for high performance operation of a solar-sail spacecraft, we developed a simple analytical model that represents dynamic behavior of spacecraft with various sizes. Since motion of the vehicle is dominated by retractable booms that support the structure, our study concentrates on developing and validating a dynamic model of a long retractable boom. Extensive tests with various configurations were conducted for the 30 Meter, light-weight, retractable, lattice boom at NASA MSFC that is structurally and dynamically similar to those of a solar-sail spacecraft currently under construction. Experimental data were then compared with the corresponding response of the analytical model. Though mixed results were obtained, the analytical model emulates several key characteristics of the boom. The paper concludes with a detailed discussion of issues observed during the study.

Stability of a Light Sail Riding on a Laser Beam

Energy Technology Data Exchange (ETDEWEB)

Manchester, Zachary [John A. Paulson School of Engineering and Applied Science, Harvard University, 60 Oxford St., Cambridge, MA 02138 (United States); Loeb, Abraham, E-mail: zmanchester@seas.harvard.edu [Astronomy Department, Harvard University, 60 Garden St., Cambridge, MA 02138 (United States)

2017-03-10

The stability of a light sail riding on a laser beam is analyzed both analytically and numerically. Conical sails on Gaussian beams, which have been studied in the past, are shown to be unstable without active control or additional mechanical modifications. A new architecture for a passively stable sail-and-beam configuration is proposed. The novel spherical shell design for the sail is capable of “beam riding” without the need for active feedback control. Full three-dimensional ray-tracing simulations are performed to verify our analytical results.

Stability of a Light Sail Riding on a Laser Beam

International Nuclear Information System (INIS)

Manchester, Zachary; Loeb, Abraham

2017-01-01

The stability of a light sail riding on a laser beam is analyzed both analytically and numerically. Conical sails on Gaussian beams, which have been studied in the past, are shown to be unstable without active control or additional mechanical modifications. A new architecture for a passively stable sail-and-beam configuration is proposed. The novel spherical shell design for the sail is capable of “beam riding” without the need for active feedback control. Full three-dimensional ray-tracing simulations are performed to verify our analytical results.

An Update to the NASA Reference Solar Sail Thrust Model

Science.gov (United States)

Heaton, Andrew F.; Artusio-Glimpse, Alexandra B.

2015-01-01

An optical model of solar sail material originally derived at JPL in 1978 has since served as the de facto standard for NASA and other solar sail researchers. The optical model includes terms for specular and diffuse reflection, thermal emission, and non-Lambertian diffuse reflection. The standard coefficients for these terms are based on tests of 2.5 micrometer Kapton sail material coated with 100 nm of aluminum on the front side and chromium on the back side. The original derivation of these coefficients was documented in an internal JPL technical memorandum that is no longer available. Additionally more recent optical testing has taken place and different materials have been used or are under consideration by various researchers for solar sails. Here, where possible, we re-derive the optical coefficients from the 1978 model and update them to accommodate newer test results and sail material. The source of the commonly used value for the front side non-Lambertian coefficient is not clear, so we investigate that coefficient in detail. Although this research is primarily designed to support the upcoming NASA NEA Scout and Lunar Flashlight solar sail missions, the results are also of interest to the wider solar sail community.

Logarithmic spiral trajectories generated by Solar sails

Science.gov (United States)

Bassetto, Marco; Niccolai, Lorenzo; Quarta, Alessandro A.; Mengali, Giovanni

2018-02-01

Analytic solutions to continuous thrust-propelled trajectories are available in a few cases only. An interesting case is offered by the logarithmic spiral, that is, a trajectory characterized by a constant flight path angle and a fixed thrust vector direction in an orbital reference frame. The logarithmic spiral is important from a practical point of view, because it may be passively maintained by a Solar sail-based spacecraft. The aim of this paper is to provide a systematic study concerning the possibility of inserting a Solar sail-based spacecraft into a heliocentric logarithmic spiral trajectory without using any impulsive maneuver. The required conditions to be met by the sail in terms of attitude angle, propulsive performance, parking orbit characteristics, and initial position are thoroughly investigated. The closed-form variations of the osculating orbital parameters are analyzed, and the obtained analytical results are used for investigating the phasing maneuver of a Solar sail along an elliptic heliocentric orbit. In this mission scenario, the phasing orbit is composed of two symmetric logarithmic spiral trajectories connected with a coasting arc.

Characterization of Candidate Solar Sail Material Exposed to Space Environmental Effects

Science.gov (United States)

Edwards, David; Hovater, Mary; Hubbs, Whitney; Wertz, George; Hollerman, William; Gray, Perry

2003-01-01

Solar sailing is a unique form of propulsion where a spacecraft gains momentum from incident photons. Solar sails are not limited by reaction mass and provide continual acceleration, reduced only by the lifetime of the lightweight film in the space environment and the distance to the Sun. Once thought to be difficult or impossible, solar sailing has come out of science fiction and into the realm of possibility. Any spacecraft using this method would need to deploy a thin sail that could be as large as many kilometers in extent. The availability of strong, ultra lightweight, and radiation resistant materials will determine the future of solar sailing. The National Aeronautics and Space Administration's Marshall Space Flight Center (MSFC) is concentrating research into the utilization of ultra lightweight materials for spacecraft propulsion. The Space Environmental Effects Team at MSFC is actively characterizing candidate solar sail material to evaluate the thermo-optical and mechanical properties after exposure to space environmental effects. This paper will describe the exposure of candidate solar sail materials to emulated space environmental effects including energetic electrons, combined electrons and Ultraviolet radiation, and hypervelocity impact of irradiated solar sail material. This paper will describe the testing procedure and the material characterization results of this investigation.

Fast Solar Sailing Astrodynamics of Special Sailcraft Trajectories

CERN Document Server

Vulpetti, Giovanni

2013-01-01

The range of solar sailing is very vast; it is a fully in-space means of propellantless propulsion that should allow us to accomplish various mission classes that are unviable using near or medium-term rocket propulsion, no matter if nuclear or electric. Fast and very fast solar sailings are special classes of sailcraft missions, initially developed only in the first half of the 1990s and still evolving, especially after the latest advances in nanotechnology.   This book describes how to plan, compute and optimize the trajectories of sailcraft with speeds considerably higher than the Earth’s orbital speed (30 km/s); such sailcraft would be able to explore the outer heliosphere, the near interstellar medium and the solar gravitational lens (550-800 astronomical units) in times significantly shorter than the span of an average career (~ 35 years), just to cite a few examples. The scientific interest in this type of exploration is huge.

European sail tower SPS [Solar Power Satellite] concept

Energy Technology Data Exchange (ETDEWEB)

Seboldt, W.; Leipold, M.; Hanowski, N. [Institute of Space Sensor Technology and Planetary Exploration, Cologne (Germany). German Aerospace Center; Klimke, M. [HOPE Worldwide Deutschland, Berlin (Germany)

2001-06-01

Based on a DLR-study in 1998/99 on behalf of ESA/ESTEC called ''System Concepts, Architectures and Technologies for Space Exploration and Utilization (SE and U)'' a new design for an Earth-orbiting Solar Power Satellite (SPS) has been developed. The design is called ''European Sail Tower SPS'' and consists mainly of deplorable sail-like structures derived from the ongoing DLR/ESA solar sail technology development activity. Such an SPS satellite features an extremely light-weight and large tower-like orbital system and could supply Europe with significant amounts of electrical power generated by photovoltaic cells and subsequently transmitted to earth via microwaves. In order to build up the sail tower, 60 units - each consisting of a pair of square-shaped sails - are moved from LEO to GEO with electric propulsion and successively assembled in GEO robotically on a central strut. Each single sail has dimensions of 150 m x 150 m and is automatically deployed, using four diagonal lightweight carbon fiber (CFRP) booms which are initially rolled up on a central hub. The electric thrusters for the transport to GEO could also be used for orbit and attitude control of the assembled tower which has a total length of about 15 km and would be mainly gravity gradient stabilized. Employing thin film solar cell technology, each sail is used as a solar array and produces an electric power in orbit of about 3.7 MW{sub e}. A microwave antenna with a diameter of 1 km transmits the power to a 10 km rectenna on the ground. The total mass of this 450 MW SPS is about 2100 tons. First estimates indicate that the costs for one kWh delivered in this way could compete with present day energy costs, if launch costs would decrease by two orders of magnitude. Furthermore, mass production and large numbers of installed SPS systems must be assumed in order to lower significantly the production costs and to reduce the influence of the expensive technology

Deployment Technology of a Heliogyro Solar Sail for Long Duration Propulsion

Science.gov (United States)

Peerawan, Wiwattananon; Bryant, Robert G.; Edmonson, William W.; Moore, William B.; Bell, Jared M.

2015-01-01

Interplanetary, multi-mission, station-keeping capabilities will require that a spacecraft employ a highly efficient propulsion-navigation system. The majority of space propulsion systems are fuel-based and require the vehicle to carry and consume fuel as part of the mission. Once the fuel is consumed, the mission is set, thereby limiting the potential capability. Alternatively, a method that derives its acceleration and direction from solar photon pressure using a solar sail would eliminate the requirement of onboard fuel to meet mission objectives. MacNeal theorized that the heliogyro-configured solar sail architecture would be lighter, less complex, cheaper, and less risky to deploy a large sail area versus a masted sail. As sail size increases, the masted sail requires longer booms resulting in increased mass, and chaotic uncontrollable deployment. With a heliogyro, the sail membrane is stowed as a roll of thin film forming a blade when deployed that can extend up to kilometers. Thus, a benefit of using a heliogyro-configured solar sail propulsion technology is the mission scalability as compared to masted versions, which are size constrained. Studies have shown that interplanetary travel is achievable by the heliogyro solar sail concept. Heliogyro solar sail concept also enables multi-mission missions such as sample returns, and supply transportation from Earth to Mars as well as station-keeping missions to provide enhanced warning of solar storm. This paper describes deployment technology being developed at NASA Langley Research Center to deploy and control the center-of-mass/center-of-pressure using a twin bladed heliogyro solar sail 6-unit (6U) CubeSat. The 6U comprises 2x2U blade deployers and 2U for payload. The 2U blade deployers can be mounted to 6U or larger scaled systems to serve as a non-chemical in-space propulsion system. A single solar sail blade length is estimated to be 2.4 km with a total area from two blades of 720 m2; total allowable weight

Status of Solar Sail Propulsion Within NASA - Moving Toward Interstellar Travel

Science.gov (United States)

Johnson, Les

2015-01-01

NASA is developing solar sail propulsion for two near-term missions and laying the groundwork for their future use in deep space and interstellar precursor missions. Solar sails use sunlight to propel vehicles through space by reflecting solar photons from a large, mirror-like sail made of a lightweight, highly reflective material. This continuous photon pressure provides propellantless thrust, allowing for very high (Delta)V maneuvers on long-duration, deep space exploration. Since reflected light produces thrust, solar sails require no onboard propellant. The Near Earth Asteroid (NEA) Scout mission, managed by MSFC, will use the sail as primary propulsion allowing it to survey and image one or more NEA's of interest for possible future human exploration. Lunar Flashlight, managed by JPL, will search for and map volatiles in permanently shadowed Lunar craters using a solar sail as a gigantic mirror to steer sunlight into the shaded craters. The Lunar Flashlight spacecraft will also use the propulsive solar sail to maneuver into a lunar polar orbit. Both missions use a 6U cubesat architecture, a common an 85 sq m solar sail, and will weigh less than 12 kilograms. Both missions will be launched on the first flight of the Space Launch System in 2018. NEA Scout and Lunar Flashlight will serve as important milestones in the development of solar sail propulsion technology for future, more ambitious missions including the Interstellar Probe - a mission long desired by the space science community which would send a robotic probe beyond the edge of the solar system to a distance of 250 Astronomical Units or more. This paper will summarize the development status of NEA Scout and Lunar Flashlight and describe the next steps required to enable an interstellar solar sail capability.

SAIL--stereo-array isotope labeling.

Science.gov (United States)

Kainosho, Masatsune; Güntert, Peter

2009-11-01

Optimal stereospecific and regiospecific labeling of proteins with stable isotopes enhances the nuclear magnetic resonance (NMR) method for the determination of the three-dimensional protein structures in solution. Stereo-array isotope labeling (SAIL) offers sharpened lines, spectral simplification without loss of information and the ability to rapidly collect and automatically evaluate the structural restraints required to solve a high-quality solution structure for proteins up to twice as large as before. This review gives an overview of stable isotope labeling methods for NMR spectroscopy with proteins and provides an in-depth treatment of the SAIL technology.

Plasma Deflection Test Setup for E-Sail Propulsion Concept

Science.gov (United States)

Andersen, Allen; Vaughn, Jason; Schneider, Todd; Wright, Ken

2016-01-01

The Electronic Sail or E-Sail is a novel propulsion concept based on momentum exchange between fast solar wind protons and the plasma sheath of long positively charged conductors comprising the E-Sail. The effective sail area increases with decreasing plasma density allowing an E-Sail craft to continue to accelerate at predicted ranges well beyond the capabilities of existing electronic or chemical propulsion spacecraft. While negatively charged conductors in plasmas have been extensively studied and flown, the interaction between plasma and a positively charged conductor is not well studied. We present a plasma deflection test method using a differential ion flux probe (DIFP). The DIFP measures the angle and energy of incident ions. The plasma sheath around a charged body can measured by comparing the angular distribution of ions with and without a positively charged test body. These test results will be used to evaluate numerical calculations of expected thrust per unit length of conductor in the solar wind plasma. This work was supported by a NASA Space Technology Research Fellowship.

Solar sail trajectory design in the Earth-Moon circular restricted three body problem

Science.gov (United States)

Das, Ashwati

The quest to explore the Moon has helped resolve scientific questions, has spurred leaps in technology development, and has revealed Earth's celestial companion to be a gateway to other destinations. With a renewed focus on returning to the Moon in this decade, alternatives to chemical propulsion systems are becoming attractive methods to efficiently use scarce resources and support extended mission durations. Thus, an investigation is conducted to develop a general framework, that facilitates propellant-free Earth-Moon transfers by exploiting sail dynamics in combination with advantageous transfer options offered in the Earth-Moon circular restricted multi-body dynamical model. Both periodic orbits in the vicinity of the Earth-Moon libration points, and lunar-centric long-term capture orbits are incorporated as target destinations to demonstrate the applicability of the general framework to varied design scanarios, each incorporating a variety of complexities and challenges. The transfers are comprised of three phases - a spiral Earth escape, a transit period, and, finally, the capture into a desirable orbit in the vicinity of the Moon. The Earth-escape phase consists of spiral trajectories constructed using three different sail steering strategies - locally optimal, on/off and velocity tangent. In the case of the Earth-libration point transfers, naturally occurring flow structures (e.g., invariant manifolds) arising from the mutual gravitational interaction of the Earth and Moon are exploited to link an Earth departure spiral with a destination orbit. In contrast, sail steering alone is employed to establish a link between the Earth-escape phase and capture orbits about the Moon due to a lack of applicable natural structures for the required connection. Metrics associated with the transfers including flight-time and the influence of operational constraints, such as occultation events, are investigated to determine the available capabilities for Earth

The research on wing sail of a land-yacht robot

Directory of Open Access Journals (Sweden)

Shaorong Xie

2015-12-01

Full Text Available A wind-driven land-yacht robot which will be applied in polar expedition is presented in this article. As the main power of robot is provided by wing sail, improving the efficiency of wing sail is the key for its motion. Wing sail is composed of airfoil, so airfoil theory is researched first, and then several airfoils and their aerodynamic performance are compared, and a high-efficiency airfoil is selected. After that, overturning torque and start wind speed of robot are analyzed to determine the size of the wing sail. At last, the wing sail is manufactured and checked, and it is tested by start wind speed experiments, running speed experiments, steering motion, and obstacle avoidance experiments. The minimum start wind speed is 6 m/s. When wind speed is 10.3 m/s and angle of attack is 90°, running velocity of robot is 1.285 m/s. A land-yacht robot can run steering motion well and avoid obstacle to the target. The result shows that wing sail satisfies the motion requirement of land-yacht robot.

Design of Sail-Assisted Unmanned Surface Vehicle Intelligent Control System

Directory of Open Access Journals (Sweden)

Yong Ma

2016-01-01

Full Text Available To achieve the wind sail-assisted function of the unmanned surface vehicle (USV, this work focuses on the design problems of the sail-assisted USV intelligent control systems (SUICS and illustrates the implementation process of the SUICS. The SUICS consists of the communication system, the sensor system, the PC platform, and the lower machine platform. To make full use of the wind energy, in the SUICS, we propose the sail angle of attack automatic adjustment (Sail_4A algorithm and present the realization flow for each subsystem of the SUICS. By using the test boat, the design and implementation of the SUICS are fulfilled systematically. Experiments verify the performance and effectiveness of our SUICS. The SUICS enhances the intelligent utility of sustainable wind energy for the sail-assisted USV significantly and plays a vital role in shipping energy-saving emission reduction requirements issued by International Maritime Organization (IMO.

Periodic orbits of solar sail equipped with reflectance control device in Earth-Moon system

Science.gov (United States)

Yuan, Jianping; Gao, Chen; Zhang, Junhua

2018-02-01

In this paper, families of Lyapunov and halo orbits are presented with a solar sail equipped with a reflectance control device in the Earth-Moon system. System dynamical model is established considering solar sail acceleration, and four solar sail steering laws and two initial Sun-sail configurations are introduced. The initial natural periodic orbits with suitable periods are firstly identified. Subsequently, families of solar sail Lyapunov and halo orbits around the L1 and L2 points are designed with fixed solar sail characteristic acceleration and varying reflectivity rate and pitching angle by the combination of the modified differential correction method and continuation approach. The linear stabilities of solar sail periodic orbits are investigated, and a nonlinear sliding model controller is designed for station keeping. In addition, orbit transfer between the same family of solar sail orbits is investigated preliminarily to showcase reflectance control device solar sail maneuver capability.

Modeling and nonlinear heading control for sailing yachts

DEFF Research Database (Denmark)

Xiao, Lin; Jouffroy, Jerome

2014-01-01

This paper presents a study on the development and testing of a model-based heading controller for a sailing yacht. Using Fossen’s compact notation for marine vehicles, we first describe a nonlinear four-degree-of-freedom (DOF) dynamic model for a sailing yacht, including roll. Our model also...

Modeling and nonlinear heading control for sailing yachts

DEFF Research Database (Denmark)

Xiao, Lin; Jouffroy, Jerome

2011-01-01

This paper presents a study on the development and testing of a model-based heading controller for a sailing yacht. Using Fossen's compact notation for marine vehicles, we first describe a nonlinear 4-DOF dynamic model for a sailing yacht, including roll. Starting from this model, we then design...

46 CFR 178.325 - Intact stability requirements for a sailing vessel.

Science.gov (United States)

2010-10-01

... weathertight deck, such as open boats; (4) A vessel that carries more than 49 passengers; (5) A sailing school vessel that carries a combined total of six or more sailing school students or instructors; (6) A vessel... whether the vessel has adequate stability and satisfactory handling characteristics under sail for...

Increased electric sail thrust through removal of trapped shielding electrons by orbit chaotisation due to spacecraft body

Directory of Open Access Journals (Sweden)

P. Janhunen

2009-08-01

Full Text Available An electric solar wind sail is a recently introduced propellantless space propulsion method whose technical development has also started. The electric sail consists of a set of long, thin, centrifugally stretched and conducting tethers which are charged positively and kept in a high positive potential of order 20 kV by an onboard electron gun. The positively charged tethers deflect solar wind protons, thus tapping momentum from the solar wind stream and producing thrust. The amount of obtained propulsive thrust depends on how many electrons are trapped by the potential structures of the tethers, because the trapped electrons tend to shield the charged tether and reduce its effect on the solar wind. Here we present physical arguments and test particle calculations indicating that in a realistic three-dimensional electric sail spacecraft there exist a natural mechanism which tends to remove the trapped electrons by chaotising their orbits and causing them to eventually collide with the conducting tethers. We present calculations which indicate that if these mechanisms were able to remove trapped electrons nearly completely, the electric sail performance could be about five times higher than previously estimated, about 500 nN/m, corresponding to 1 N thrust for a baseline construction with 2000 km total tether length.

Fluid Distribution Analysis of Kite Sail for Application on Ship

Directory of Open Access Journals (Sweden)

. Amiadji

2017-09-01

Full Text Available The increasing number of operating ships resulted in high air pollution from the combustion of the ship's engine. Efforts to utilize alternative energy to reduce ship engine work have been done, one of them is using unlimited alternative energy that is wind where one of its application of is the application of new ships sail, kite sail as auxiliary system of ship propulsion . In this final project purposed to find out the value of aerodynamic force of kite sail and power it can generated , with a CFD method that uses 3 kite sail design forms, rectangular, triangular, and elliptical, with an area of 160 m2 this models are simulated at wind speed variations from 13.4 m / s up 15.82 m / s and angel of attack variation of 15.20, and 25. From the variation obtained the total aerodynamic force generated can reach 28.73 kN in rectangular shape, 30.79 kN of Elipsical shape, and 27.55 kN of triangular shape, on variant Angel Of attack 25. From the value of the aerodynamic force, each kite sail capable of generating power, on a rectangular kite sail of up to 263.02 kW, an elipsical 276.75 kW, and a triangular 252.63 kW.

Calculation of Flows Over Underwater Bodies with Hull, Sail and Appendages

International Nuclear Information System (INIS)

Shoab, M.; Ayub, M.; Bilal, S.; Zahir, S.; Khan, M.A.

2004-01-01

A comprehensive study has been made for the hydrodynamic analysis of the submarine DARPA 2. The analysis was first performed for hull, then hull with sail on top and then for the complete submarine including hull, sail and appendages. A comparison of tangential velocity and pressure distribution for hull is accomplished using CFD flow solvers and published data. Further, the pressure distribution over the hull with sail is also analyzed. Finally, pressure distribution, forces and moments were calculated over the complete submarine including hull, sail and appendages. Comparison 01 pressure distribution and tangential velocity for the hull show a good agreement with published data. Pressure coefficient comparison for the hull with sail shows the good CFD-CFD agreement. Comparison of Normal force and pitching moment of complete submarine having hull, sail and appendages shows a reasonable agreement with the experimental results of DARPA 2. Both quantitative and qualitative analysis of the complete submarine estimates the required design force and moment at different angles of attack and also demonstrate the flow visualization. (author)

Improving comfort while hiking in a sailing boat

NARCIS (Netherlands)

Jansen, A.J.; Van Abbema, A.; Howe, C.

2012-01-01

The paper presents the changes in perceived comfort while hiking in a sailing boat (in this case the Laser, a single-handed Olympic dinghy) due to a new design of hiking pads. The project used a ‘research by design method’. The aim was to improve sailing comfort which leads to lower fatigue and

On path generation and feedforward control for a class of surface sailing vessels

DEFF Research Database (Denmark)

Xiao, Lin; Jouffroy, Jerome

2010-01-01

Sailing vessels with wind as their main means of propulsion possess a unique property that the paths they take depend on the wind direction, which, in the literature, has attracted less attention than normal vehicles propelled by propellers or thrusters. This paper considers the problem of motion...... planning and controllability for sailing vehicles representing the no-sailing zone effect in sailing. Following our previous work, we present an extended algorithm for automatic path generation with a prescribed initial heading for a simple model of sailing vehicles, together with a feedforward controller...

A solar sail design for a mission to the near-interstellar medium

International Nuclear Information System (INIS)

Garner, Charles E.; Layman, William; Gavit, Sarah A.; Knowles, Timothy

2000-01-01

Mission concepts to several hundred AU are under study at NASA Marshall Space Flight Center (MSFC) and NASA Jet Propulsion Laboratory (JPL). In order to send a scientific probe beyond the heliopause in a reasonable length of time - no more than 15 yr and preferably 10 yr - the ΔV requirements are approximately 70 km/s. The preliminary results of these mission studies indicate that a solar sail can provide a cumulative ΔV of over 70 km/s to send a probe to a distance of 200 AU from the Sun in under 15 years. This is done by using photon pressure on the sail to shape the trajectory in the inner solar system so that a perihelion of 0.25 AU is achieved. This paper presents the results of a design study for a solar sail to achieve the performance requirements identified in an interstellar probe (ISP) mission study to the near-interstellar medium. The baseline solar sail design for this ISP mission assumes an areal density of 1g/m2 (including film and structure), and a diameter of ∼410 m with an 11-m-wide central opening. The sail will be used from 0.25 to 5 AU, where it will be jettisoned. The total spacecraft module mass propelled by the sail is ∼191 kg. The gores of the sail are folded together and wrapped around a small cylinder. Centripetal force is used for sail deployment. The spacecraft is moved off-center with booms for sail attitude control and thrust vector pointing

Tidal sails : an alternative to turbines for harvesting tidal current energy

Energy Technology Data Exchange (ETDEWEB)

Hanssen, J.E. [Tidal Sails, Haugesund (Norway)

2008-07-01

Tidal sail technology harnesses the energy of tidal streams in order to produce electricity. Tidal currents move the sails that are attached to wires that rotate generator wheels to produce electricity. The technology has a low impact on the surrounding environment and is simple to install. This presentation discussed the methods used to determine the influence of relative sail velocity and measure estimated energy output levels. The sails were recently tested at an on-grid tidal stream pilot in the Norwegian Arctic. A 300 kW turbine installed at the site demonstrated that the site was suitable for a full-scale development of 20 tripod-mounted 600 kW turbines placed at 50 m depth. It was estimated that the 10 strings of 1000 m length provided between 200 and 250 GWh per year. The sails have also been used at a high speed site in Washington state in the United States. The 25 m pilot plant was installed to verify site suitability and examine sail behaviour in real, high-flow currents. It is expected that the technology will be fully commercialized by 2011. Other pilot tests are being conducted to examine flow behaviour; mooring and flotation functionality; and launch and lift capabilities. Engineering work is ongoing to examine plant designs, variable sail spacing, and collaborations with key component suppliers. tabs., figs.

A UKSeRP for SAIL: striking a balance

Directory of Open Access Journals (Sweden)

Kerina Jones

2017-04-01

The SAIL UKSeRP represents a powerful analytical environment within a privacy-protecting safe haven and secure remote access system which has been designed to be scalable and adaptable to meet the needs of the rapidly growing data linkage community. Further challenges lie ahead as the landscape develops and emerging data types become more available. UKSeRP technology is available and customisable for other use cases within the UK and international jurisdictions, to operate within their respective governance frameworks.

On steering a sailing ship in a wearing maneuver

DEFF Research Database (Denmark)

Jouffroy, Jerome

Compared to more conventional ships, little attention was given to nonlinear control design for ships sailing by the wind. Following our previous work, this paper addresses the issue of trajectory and reference input generation for a model that imitates the general behavior of sailing vessels...

Solar Array Sails: Possible Space Plasma Environmental Effects

Science.gov (United States)

Mackey, Willie R.

2005-01-01

An examination of the interactions between proposed "solar sail" propulsion systems with photovoltaic energy generation capabilities and the space plasma environments. Major areas of interactions ere: Acting from high voltage arrays, ram and wake effects, V and B current loops and EMI. Preliminary analysis indicates that arcing will be a major risk factor for voltages greater than 300V. Electron temperature enhancement in the wake will be produce noise that can be transmitted via the wake echo process. In addition, V and B induced potential will generate sheath voltages with potential tether like breakage effects in the thin film sails. Advocacy of further attention to these processes is emphasized so that plasma environmental mitigation will be instituted in photovoltaic sail design.

On the feasibility of a negative polarity electric sail

Directory of Open Access Journals (Sweden)

P. Janhunen

2009-04-01

Full Text Available An electric solar wind sail is a recently introduced propellantless space propulsion method whose technical development has also started. In its original version, the electric sail consists of a set of long, thin, centrifugally stretched and conducting tethers which are charged positively and kept in a high positive potential of 20 kV by an onboard electron gun. The positively charged tethers deflect solar wind protons, thus tapping momentum from the solar wind stream and producing thrust. Here we consider a variant of the idea with negatively charged tethers. The negative polarity electric sail seems to be more complex to implement than the positive polarity variant since it needs an ion gun instead of an electron gun as well as a more complex tether structure to keep the electron field emission current in check with the tether surface. However, since this first study of the negative polarity electric sail does not reveal any fundamental issues, more detailed studies would be warranted.

Biobank Metaportal to Enhance Collaborative Research: sail.simbioms.org

Directory of Open Access Journals (Sweden)

Maria Krestyaninova

2012-08-01

Full Text Available In order to identify new ways to prevent, diagnose and treat diseases, biobanks systematically collect samples of human tissues and population-wide data on health and lifestyle. Efficient access to population biobank data and to biomaterial is crucial for development and marketing of new pharmaceutical products, especially in the area of personalised medicine. However, such access is hindered by legal and ethical constraints, and by the huge semantic diversity across different biobanks. To address these challenges, we have developed SAIL, a sophisticated metaportal for biobank data annotation across different collections and repositories, harmonised to allow cross-biobank searchability, while preserving the anonymity and privacy of the underlying data such that legal and ethical requirements are met. We describe the technological architecture and design of SAIL that allows us to meet these pressing challenges, and give an overview of the current functionality of the application. SAIL is available online at sail.simbioms.org, and it currently contains around 200 000 samples from 14 collections.

SOLAR SAIL PROPULSION SENSITIVITY TO MEMBRANE SHAPE AND OPTICAL PROPERTIES USING THE SOLAR VECTORING EVALUATION TOOL (SVET)

Science.gov (United States)

Ewing, Anthony

2005-01-01

Solar sail propulsive performance is dependent on sail membrane optical properties and on sail membrane shape. Assumptions of an ideal sail (flat, perfect reflector) can result in errors which can affect spacecraft control, trajectory analyses, and overall evaluation of solar sail performance. A MATLAB(R) program has been developed to generate sail shape point cloud files for two square-architecture solar sail designs. Simple parabolic profiles are assumed for sail shape under solar pressure loading. These files are then input into the Solar Vectoring Evaluation Tool (SVET) software to determine the propulsive force vector, center of pressure, and moments about the sail body axes as a function of sail shape and optical properties. Also, the impact of the center-line angle, due to non-perfect optical properties, is addressed since this constrains sail force vector cone angle and is often overlooked when assuming ideal-reflector membranes. Preliminary sensitivity analysis using these tools aids in determining the key geometric and optical parameters that drive solar sail propulsive performance.

SAIL: Summation-bAsed Incremental Learning for Information-Theoretic Text Clustering.

Science.gov (United States)

Cao, Jie; Wu, Zhiang; Wu, Junjie; Xiong, Hui

2013-04-01

Information-theoretic clustering aims to exploit information-theoretic measures as the clustering criteria. A common practice on this topic is the so-called Info-Kmeans, which performs K-means clustering with KL-divergence as the proximity function. While expert efforts on Info-Kmeans have shown promising results, a remaining challenge is to deal with high-dimensional sparse data such as text corpora. Indeed, it is possible that the centroids contain many zero-value features for high-dimensional text vectors, which leads to infinite KL-divergence values and creates a dilemma in assigning objects to centroids during the iteration process of Info-Kmeans. To meet this challenge, in this paper, we propose a Summation-bAsed Incremental Learning (SAIL) algorithm for Info-Kmeans clustering. Specifically, by using an equivalent objective function, SAIL replaces the computation of KL-divergence by the incremental computation of Shannon entropy. This can avoid the zero-feature dilemma caused by the use of KL-divergence. To improve the clustering quality, we further introduce the variable neighborhood search scheme and propose the V-SAIL algorithm, which is then accelerated by a multithreaded scheme in PV-SAIL. Our experimental results on various real-world text collections have shown that, with SAIL as a booster, the clustering performance of Info-Kmeans can be significantly improved. Also, V-SAIL and PV-SAIL indeed help improve the clustering quality at a lower cost of computation.

Utilization of an H-reversal trajectory of a solar sail for asteroid deflection

International Nuclear Information System (INIS)

Gong Shengping; Li Junfeng; Zeng Xiangyuan

2011-01-01

Near Earth Asteroids have a possibility of impacting the Earth and always represent a threat. This paper proposes a way of changing the orbit of the asteroid to avoid an impact. A solar sail evolving in an H-reversal trajectory is utilized for asteroid deflection. Firstly, the dynamics of the solar sail and the characteristics of the H-reversal trajectory are analyzed. Then, the attitude of the solar sail is optimized to guide the sail to impact the target asteroid along an H-reversal trajectory. The impact velocity depends on two important parameters: the minimum solar distance along the trajectory and lightness number of the solar sail. A larger lightness number and a smaller solar distance lead to a higher impact velocity. Finally, the deflection capability of a solar sail impacting the asteroid along the H-reversal trajectory is discussed. The results show that a 10 kg solar sail with a lead-time of one year can move Apophis out of a 600-m keyhole area in 2029 to eliminate the possibility of its resonant return in 2036. (editor's recommendation)

Advances in solar sailing

CERN Document Server

Third International Symposium on Solar Sailing

2014-01-01

Hosted by the Advanced Space Concepts Laboratory within the department of Mechanical and Aerospace Engineering of the University of Strathclyde, the third International Symposium on Solar Sailing was held in McCance Building at 16 Richmond Street, Glasgow, between 11 and 13 June 2013. The symposium attracted over 90 delegates from19 different counties, bringing together international experts from across the globe to discuss funded solar sail flight programs alongside on-going technology development and testing programs. The symposium also provided a forum for the discussion of enabling technologies, new application concepts, materials and structural concepts, space environmental effects, dynamics, navigation, control, and much more. This volume contains the unabridged symposium proceedings, in the gathered experts own words. As symposium chair, I thank our partners at Scottish Enterprise and L’Garde, Inc., the symposium’s gold sponsor, for their support in realising this symposium.

Economic feasibility of sail power devices on Great Lakes bulk carriers

Energy Technology Data Exchange (ETDEWEB)

1982-03-24

Progress is reported in a project to determine whether retro-fitting existing Great Lakes bulk carriers with auxiliary sail powering devices is economically feasible. The approach being used is to apply known technology both in terms of sail devices and calculation methods to determine the amount of fuel that can be saved and the probable cost of the sail device. Progress includes the identification and collection of data needed to determine the state of the art as well as to model the problem. Several sail powering devices were compared and an unstayed cat rig was chosen for further analysis and its performance characteristics were incorporated into a computer model, which is flow charted. (LEW)

Simulation of upwind maneuvering of a sailing yacht

Science.gov (United States)

Harris, Daniel Hartrick

A time domain maneuvering simulation of an IACC class yacht suitable for the analysis of unsteady upwind sailing including tacking is presented. The simulation considers motions in six degrees of freedom. The hydrodynamic and aerodynamic loads are calculated primarily with unsteady potential theory supplemented by empirical viscous models. The hydrodynamic model includes the effects of incident waves. Control of the rudder is provided by a simple rate feedback autopilot which is augmented with open loop additions to mimic human steering. The hydrodynamic models are based on the superposition of force components. These components fall into two groups, those which the yacht will experience in calm water, and those due to incident waves. The calm water loads are further divided into zero Froude number, or "double body" maneuvering loads, hydrostatic loads, gravitational loads, free surface radiation loads, and viscous/residual loads. The maneuvering loads are calculated with an unsteady panel code which treats the instantaneous geometry of the yacht below the undisturbed free surface. The free surface radiation loads are calculated via convolution of impulse response functions derived from seakeeping strip theory. The viscous/residual loads are based upon empirical estimates. The aerodynamic model consists primarily of a database of steady state sail coefficients. These coefficients treat the individual contributions to the total sail force of a number of chordwise strips on both the main and jib. Dynamic effects are modeled by using the instantaneous incident wind velocity and direction as the independent variables for the sail load contribution of each strip. The sail coefficient database was calculated numerically with potential methods and simple empirical viscous corrections. Additional aerodynamic load calculations are made to determine the parasitic contributions of the rig and hull. Validation studies compare the steady sailing hydro and aerodynamic loads

Aerodynamics of yacht sails: viscous flow features and surface pressure distributions

Science.gov (United States)

Viola, Ignazio Maria

2014-11-01

The present paper presents the first Detached Eddy Simulation (DES) on a yacht sails. Wind tunnel experiments on a 1:15th model-scale sailing yacht with an asymmetric spinnaker (fore sail) and a mainsails (aft sail) were modelled using several time and grid resolutions. Also the Reynolds-average Navier-Stokes (RANS) equations were solved for comparison with DES. The computed forces and surface pressure distributions were compared with those measured with both flexible and rigid sails in the wind tunnel and good agreement was found. For the first time it was possible to recognise the coherent and steady nature of the leading edge vortex that develops on the leeward side of the asymmetric spinnaker and which significantly contributes to the overall drive force. The leading edge vortex increases in diameter from the foot to the head of the sail, where it becomes the tip vortex and convects downstream in the direction of the far field velocity. The tip vortex from the head of the mainsail rolls around the one of the spinnaker. The spanwise twist of the spinnaker leads to a mid-span helicoidal vortex, which has never been reported by previous authors, with an horizontal axis and rotating in the same direction of the tip vortex.

Experiments on sail aerodynamics

International Nuclear Information System (INIS)

Greenhalgh, S.; Curtiss, H.C.

1985-01-01

This paper will present the results of experimental and analytical studies of membrane lifting surfaces that serve as a starting point for a more systematic study of sails. The work is an extension of earlier studies conducted on two-dimensional membrane lifting surfaces. (author)

Reduction of Martian Sample Return Mission Launch Mass with Solar Sail Propulsion

Science.gov (United States)

Russell, Tiffany E.; Heaton, Andrew; Thomas, Scott; Thomas, Dan; Young, Roy; Baysinger, Mike; Capizzo, Pete; Fabisinski, Leo; Hornsby, Linda; Maples, Dauphne;

Cardiovascular load in off-shore sailing competition.

Science.gov (United States)

Bernardi, M; Felici, F; Marchetti, M; Marchettoni, P

1990-06-01

Blood pressure, heart rate, VO2 and lactate accumulation have been measured during the hauling of ropes that, in off shore sailing, very often implies MVC isometric effort. Measures have been taken alternatively on the boat or in laboratory with a boat simulator. It appears that energy output is moderate, lactic O2 debt not relevant and blood pressure is maintained quite unchanged due to the short duration of isometric effort. Cardiovascular load is therefore not heavy and sailing can be enlisted among aerobic recreational exercises.

Exploring the Heliogyro’s Superior Orbital Control Capabilities for Solar Sail Halo Orbits

NARCIS (Netherlands)

Heiligers, M.J.; Guerrant, D.; Lawrence, D

2017-01-01

Solar sailing is an elegant form of space propulsion that reflects solar photons off a large membrane to produce thrust. Different sail configurations exist, including a traditional fixed polygonal flat sail and a heliogyro, which divides the membrane into a number of long, slender blades. The

Sails: a new gypsum speleothem from Naica, Chihuahua, Mexico

Directory of Open Access Journals (Sweden)

Forti Paolo

2007-01-01

Full Text Available The caves of Naica (Chihuahua, Mexico are perhaps the most famous mine caves of the world due to the presence of giganticgypsum crystals. Nevertheless, very little research has been carried out on this karst area until now. A multidisciplinary investigationstarted in 2006 with the aim not only to define the genesis and the age of the Naica gypsum crystals, but also on other scientificaspects of these caves.This paper describes a completely new type of gypsum speleothem: the “sails”, observed only inside the Cueva de las Velas, one ofthe caves of the Naica system. This speleothem consists of extremely thin, elongated skeleton crystals that have grown epitaxiallyonly on the tips of the gypsum crystals pointing upward. The genesis of sails is strictly related to the environmental conditions setup inside the cave just after the artificial lowering of the groundwater by mine dewatering (less than 20 yr ago. In a few years sail speleothems will disappear entirely and therefore this study is fundamental to preserve at least the memory of them.

Space Environmental Effects Testing and Characterization of the Candidate Solar Sail Material Aluminized Mylar

Science.gov (United States)

Edwards, D. L.; Hubbs, W. S.; Wertz, G. E.; Alstatt, R.; Munafo, Paul (Technical Monitor)

2001-01-01

The usage of solar sails as a propellantless propulsion system has been proposed for many years. The technical challenges associated with solar sails are fabrication of ultralightweight films, deploying the sails and controlling the spacecraft. Integral to all these challenges is the mechanical property integrity of the sail while exposed to the harsh environment of space. This paper describes testing and characterization of a candidate solar sail material, Aluminized Mylar. This material was exposed to a simulated Geosynchronous Transfer Orbit (GTO) and evaluated by measuring thermooptical and mechanical property changes. Testing procedures and results are presented.

Starship Sails Propelled by Cost-Optimized Directed Energy

Science.gov (United States)

Benford, J.

Microwave and laser-propelled sails are a new class of spacecraft using photon acceleration. It is the only method of interstellar flight that has no physics issues. Laboratory demonstrations of basic features of beam-driven propulsion, flight, stability (`beam-riding'), and induced spin, have been completed in the last decade, primarily in the microwave. It offers much lower cost probes after a substantial investment in the launcher. Engineering issues are being addressed by other applications: fusion (microwave, millimeter and laser sources) and astronomy (large aperture antennas). There are many candidate sail materials: carbon nanotubes and microtrusses, beryllium, graphene, etc. For acceleration of a sail, what is the cost-optimum high power system? Here the cost is used to constrain design parameters to estimate system power, aperture and elements of capital and operating cost. From general relations for cost-optimal transmitter aperture and power, system cost scales with kinetic energy and inversely with sail diameter and frequency. So optimal sails will be larger, lower in mass and driven by higher frequency beams. Estimated costs include economies of scale. We present several starship point concepts. Systems based on microwave, millimeter wave and laser technologies are of equal cost at today's costs. The frequency advantage of lasers is cancelled by the high cost of both the laser and the radiating optic. Cost of interstellar sailships is very high, driven by current costs for radiation source, antennas and especially electrical power. The high speeds necessary for fast interstellar missions make the operating cost exceed the capital cost. Such sailcraft will not be flown until the cost of electrical power in space is reduced orders of magnitude below current levels.

76 FR 43893 - Special Local Regulations; Port Huron to Mackinac Island Sail Race

Science.gov (United States)

2011-07-22

... Local Regulations; Port Huron to Mackinac Island Sail Race AGENCY: Coast Guard, DHS. ACTION: Temporary... Port Huron to Mackinac Island Sail Race. This action is necessary to safely control vessel movements in... Mackinac boat race (officially titled the ``Bell's Beer Bayview Mackinac Race'') will set sail on Saturday...

Deorbiting Upper-Stages in LEO at EOM using Solar Sails

Directory of Open Access Journals (Sweden)

Alexandru IONEL

2017-06-01

Full Text Available This paper analyzes the possibility of deorbiting a launch vehicle upper-stage at end-of-mission from low Earth orbit through the use of a solar sail. Different solar sail sizes are taken into account. The analysis is made via a MATLAB numerical simulation, integrating with the ode45 solver the accelerations arising from geopotential, atmospheric drag and solar radiation pressure. Direct solar pressure and drag augmentation effect are analyzed and a state of the art study in the solar sail research field is performed for a better grasp of the feasibility of the device implementation.

An investigation of headsail/mainsail interaction in a sailing yacht

International Nuclear Information System (INIS)

Neumann, P.M.; Johannes, R.A.; Keffer, J.F.

1985-01-01

In a previous paper, the separation zone immediately behind the mast for a main-sail/genoa configuration was analysed for a number of cross-sectional shapes and angles of attack to determine the effect upon the windward performance of the rig. The study was carried out with and without the presence of the overlapping genoa in order to isolate the effects of the two sails. Lift and drag were determined for the mast/main-sail combination using rows of static pressure taps. From this the zones of separation at the mast on the leeward and windward were inferred. These data were supported independently from hot-wire traverses along the sail in the separation regions. As well the lift/drag ratio of the mast/mainsail was determined as a function of the sheeting angles of both the main and the genoa. A quantitative assessment of this ratio, provided the optimum sheeting angles for this configuration. (author)

Fast Radio Bursts from Extragalactic Light Sails

Energy Technology Data Exchange (ETDEWEB)

Lingam, Manasvi [John A. Paulson School of Engineering and Applied Sciences, Harvard University, 29 Oxford Street, Cambridge, MA 02138 (United States); Loeb, Abraham, E-mail: manasvi@seas.harvard.edu [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States)

2017-03-10

We examine the possibility that fast radio bursts (FRBs) originate from the activity of extragalactic civilizations. Our analysis shows that beams used for powering large light sails could yield parameters that are consistent with FRBs. The characteristic diameter of the beam emitter is estimated through a combination of energetic and engineering constraints, and both approaches intriguingly yield a similar result that is on the scale of a large rocky planet. Moreover, the optimal frequency for powering the light sail is shown to be similar to the detected FRB frequencies. These “coincidences” lend some credence to the possibility that FRBs might be artificial in origin. Other relevant quantities, such as the characteristic mass of the light sail, and the angular velocity of the beam, are also derived. By using the FRB occurrence rate, we infer upper bounds on the rate of FRBs from extragalactic civilizations in a typical galaxy. The possibility of detecting fainter signals is briefly discussed, and the wait time for an exceptionally bright FRB event in the Milky Way is estimated.

Fast Radio Bursts from Extragalactic Light Sails

International Nuclear Information System (INIS)

Lingam, Manasvi; Loeb, Abraham

2017-01-01

We examine the possibility that fast radio bursts (FRBs) originate from the activity of extragalactic civilizations. Our analysis shows that beams used for powering large light sails could yield parameters that are consistent with FRBs. The characteristic diameter of the beam emitter is estimated through a combination of energetic and engineering constraints, and both approaches intriguingly yield a similar result that is on the scale of a large rocky planet. Moreover, the optimal frequency for powering the light sail is shown to be similar to the detected FRB frequencies. These “coincidences” lend some credence to the possibility that FRBs might be artificial in origin. Other relevant quantities, such as the characteristic mass of the light sail, and the angular velocity of the beam, are also derived. By using the FRB occurrence rate, we infer upper bounds on the rate of FRBs from extragalactic civilizations in a typical galaxy. The possibility of detecting fainter signals is briefly discussed, and the wait time for an exceptionally bright FRB event in the Milky Way is estimated.

Improving magnetosphere in situ observations using solar sails

Science.gov (United States)

Parsay, Khashayar; Schaub, Hanspeter; Schiff, Conrad; Williams, Trevor

2018-01-01

Past and current magnetosphere missions employ conventional spacecraft formations for in situ observations of the geomagnetic tail. Conventional spacecraft flying in inertially fixed Keplerian orbits are only aligned with the geomagnetic tail once per year, since the geomagnetic tail is always aligned with the Earth-Sun line, and therefore, rotates annually. Solar sails are able to artificially create sun-synchronous orbits such that the orbit apse line remains aligned with the geomagnetic tail line throughout the entire year. This continuous presence in the geomagnetic tail can significantly increase the science phase for magnetosphere missions. In this paper, the problem of solar sail formation design is explored using nonlinear programming to design optimal two-craft, triangle, and tetrahedron solar sail formations, in terms of formation quality and formation stability. The designed formations are directly compared to the formations used in NASA's Magnetospheric Multi-Scale mission.

Comprehensive Solar Sail Simulation, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Solar sails as a propulsive device have several potential applications: providing access to previously inaccessible orbits, longer mission times, and increased...

Mars Sample Return Using Solar Sail Propulsion

Science.gov (United States)

Johnson, Les; Macdonald, Malcolm; Mcinnes, Colin; Percy, Tom

2012-01-01

Many Mars Sample Return (MSR) architecture studies have been conducted over the years. A key element of them is the Earth Return Stage (ERS) whose objective is to obtain the sample from the Mars Ascent Vehicle (MAV) and return it safely to the surface of the Earth. ERS designs predominantly use chemical propulsion [1], incurring a significant launch mass penalty due to the low specific impulse of such systems coupled with the launch mass sensitivity to returned mass. It is proposed to use solar sail propulsion for the ERS, providing a high (effective) specific impulse propulsion system in the final stage of the multi-stage system. By doing so to the launch mass of the orbiter mission can be significantly reduced and hence potentially decreasing mission cost. Further, solar sailing offers a unique set of non-Keplerian low thrust trajectories that may enable modifications to the current approach to designing the Earth Entry Vehicle by potentially reducing the Earth arrival velocity. This modification will further decrease the mass of the orbiter system. Solar sail propulsion uses sunlight to propel vehicles through space by reflecting solar photons from a large, mirror-like surface made of a lightweight, reflective material. The continuous photonic pressure provides propellantless thrust to conduct orbital maneuvering and plane changes more efficiently than conventional chemical propulsion. Because the Sun supplies the necessary propulsive energy, solar sails require no onboard propellant, thus reducing system mass. This technology is currently at TRL 7/8 as demonstrated by the 2010 flight of the Japanese Aerospace Exploration Agency, JAXA, IKAROS mission. [2

The influence of a yacht's heeling stability on optimum sail design

Science.gov (United States)

Sneyd, A. D.; Sugimoto, T.

1997-01-01

This paper presents fundamental results concerning the optimum design of yacht sails and masts. The aerodynamics of a high aspect ratio sail in uniform flow is analysed using lifting line theory to maximise thrust for a given sail area. The novel feature of this work is that thrust is optimised subject to the constraint that the aerodynamic heeling moment generated by the sail is balanced by the righting moment due to hull buoyancy (and the weight of the keel). Initially, the heel angle is therefore unknown, and determined as part of the solution process. Under the assumption of small heel angle, the problem reduces to minimising a quadratic form in the Fourier coefficients for the circulation distribution along the mast, and a simple analytic solution can be derived. It is found that if the mast is too high, the upper section is unused, and as a consequence there is a theoretically ideal mast height for a yacht of given heeling stability. Under the constraints of given sail area and heeling equilibrium it is found that no advantage is to be gained by allowing reverse circulation near the top of the mast. Various implications for yacht performance are discussed.

Propellantless Attitude Control of Solar Sail Technology Utilizing Reflective Control Devices

Science.gov (United States)

Munday, Jeremy

2016-01-01

Solar sails offer an opportunity for a CubeSatscale, propellant-free spacecraft technology that enables long-term and long-distance missions not possible with traditional methods. Solar sails operate using the transfer of linear momentum from photons of sunlight reflected from the surface of the sail. To propel the spacecraft, no mechanically moving parts, thrusters, or propellant are needed. However, attitude control, or orientation, is still performed using traditional methods involving reaction wheels and propellant ejection, which severely limit mission lifetime. For example, the current state of the art solutions employed by upcoming missions couple solar sails with a state of the art propellant ejection gas system. Here, the use of the gas thruster has limited the lifetime of the mission. To solve the limited mission lifetime problem, the Propellantless Attitude Control of Solar Sail Technology Utilizing Reflective Control Devices project team is working on propellantless attitude control using thin layers of material, an optical film, electrically switchable from transparent to reflective. The technology is based on a polymer-dispersed liquid crystal (PDLC), which allows this switch upon application of a voltage. This technology removes the need for propellant, which reduces weight and cost while improving performance and lifetime.

Solar Sail Models and Test Measurements Correspondence for Validation Requirements Definition

Science.gov (United States)

Ewing, Anthony; Adams, Charles

2004-01-01

Solar sails are being developed as a mission-enabling technology in support of future NASA science missions. Current efforts have advanced solar sail technology sufficient to justify a flight validation program. A primary objective of this activity is to test and validate solar sail models that are currently under development so that they may be used with confidence in future science mission development (e.g., scalable to larger sails). Both system and model validation requirements must be defined early in the program to guide design cycles and to ensure that relevant and sufficient test data will be obtained to conduct model validation to the level required. A process of model identification, model input/output documentation, model sensitivity analyses, and test measurement correspondence is required so that decisions can be made to satisfy validation requirements within program constraints.

Lessons for Interstellar Travel from the G&C Design of the NEA Scout Solar Sail Mission

Science.gov (United States)

Heaton, Andrew; Diedrich, Benjamin

2017-01-01

NASA is developing the Near Earth Asteroid (NEA) Scout mission that will use a solar sail to travel to an asteroid where it will perform a slow flyby to acquire science imagery. A guidance and control system was developed to meet the science and trajectory requirements. The NEA Scout design process can be applied to an interstellar or precursor mission that uses a beam-propelled sail. The scientific objectives are met by accurately targeting the destination trajectory position and velocity. The destination is targeted by understanding the force on the sail from the beam (or sunlight in the case of NEA Scout) over the duration of the thrust maneuver. The propulsive maneuver is maintained by accurate understanding of the torque on the sail, which is a function of sail shape, optical properties, and mass properties, all of which apply to NEA Scout and beam propelled sails. NEA Scout uses active control of the sail attitude while trimming the solar torque, which could be used on a beamed propulsion sail if necessary. The biggest difference is that NEA Scout can correct for uncertainties in sail thrust modeling, spacecraft orbit, and target orbit throughout the flight to the target, while beamed propulsion needs accurate operation for the short duration of the beamed propulsion maneuver, making accurate understanding of the sail thrust and orbits much more critical.

The Changing Tides of the Type 2 Diabetes Epidemic-Smooth Sailing or Troubled Waters Ahead? Kelly West Award Lecture 2016.

Science.gov (United States)

Gregg, Edward W

2017-10-01

The Kelly West Award for Outstanding Achievement in Epidemiology is given in memory of Kelly M. West, widely regarded as the "father of diabetes epidemiology," to an individual who has made significant contributions to the field of diabetes epidemiology. Edward W. Gregg, PhD, of the Division of Diabetes Translation, Centers for Disease Control and Prevention, Atlanta, GA, received the prestigious award at the American Diabetes Association's 76th Scientific Sessions, 10-14 June 2016, in New Orleans, LA. He presented the Kelly West Award Lecture, "Changing Tides of the Type 2 Diabetes Epidemic-Smooth Sailing or Troubled Waters Ahead?" on Sunday, 12 June 2016. © 2017 by the American Diabetes Association.

Thrust and torque vector characteristics of axially-symmetric E-sail

Science.gov (United States)

Bassetto, Marco; Mengali, Giovanni; Quarta, Alessandro A.

2018-05-01

The Electric Solar Wind Sail is an innovative propulsion system concept that gains propulsive acceleration from the interaction with charged particles released by the Sun. The aim of this paper is to obtain analytical expressions for the thrust and torque vectors of a spinning sail of given shape. Under the only assumption that each tether belongs to a plane containing the spacecraft spin axis, a general analytical relation is found for the thrust and torque vectors as a function of the spacecraft attitude relative to an orbital reference frame. The results are then applied to the noteworthy situation of a Sun-facing sail, that is, when the spacecraft spin axis is aligned with the Sun-spacecraft line, which approximatively coincides with the solar wind direction. In that case, the paper discusses the equilibrium shape of the generic conducting tether as a function of the sail geometry and the spin rate, using both a numerical and an analytical (approximate) approach. As a result, the structural characteristics of the conducting tether are related to the spacecraft geometric parameters.

Solarelastic Stability of Solar Sail Structures

Data.gov (United States)

National Aeronautics and Space Administration — In order to avoid an unintended failure in proposed Solar Sail spacecraft due to solarelastic interactions it is important to develop an analytical framework for...

ZZ SAIL, Albedo Scattering Data Library for 3-D Monte-Carlo Radiation Transport in LWR Pressure Vessel

International Nuclear Information System (INIS)

1982-01-01

1 - Description of problem or function: Format: SAIL format; Number of groups: 23 neutron / 17 gamma-ray; Nuclides: Type 04 Concrete and Low Carbon Steel (A533B). Origin: Science Applications, Inc (SAI); Weighting spectrum: yes. SAIL is a library of albedo scattering data to be used in three-dimensional Monte Carlo codes to solve radiation transport problems specific to the reactor pressure vessel cavity region of a LWR. The library contains data for Type 04 Concrete and Low Carbon Steel (A533B). 2 - Method of solution: The calculation of the albedo data was perform- ed with a version of the discrete ordinates transport code DOT which treats the transport of neutrons, secondary gamma-rays and gamma- rays in one dimension, while maintaining the complete two-dimension- al treatment of the angular dependence

On Motion Planning for Point-to-Point Maneuvers for a Class of Sailing Vehicles

DEFF Research Database (Denmark)

Xiao, Lin; Jouffroy, Jerome

2011-01-01

Despite their interesting dynamic and controllability properties, sailing vehicles have not been much studied in the control community. In this paper, we investigate motion planning of such vehicles. Starting from a simple dynamic model of sailing vessels in one dimension, this paper first...... considers their associated controllability issues, with the so-called no-sailing zone as a starting point, and it links them with a motion planning strategy using two-point boundary value problems as the main mathematical tool. This perspective is then expanded to do point-to-point maneuvers of sailing...

Images in pediatrics: the thymic sail sign and thymic wave sign.

Science.gov (United States)

Alves, Nuno D; Sousa, Marta

2013-01-01

The authors present a radiographic image portraying the "thymic sail sign" and the "thymic wave sign," both normal findings in infant radiographs and present a short description of these signs. These are distinguished from pathologic findings such as the "spinnaker-sail sign" in pneumomediastinum.

Flights of a spacecraft with a solar sail out of ecliptic plane

Science.gov (United States)

Polyakhova, Elena; Starkov, Vladimir; Stepenko, Nikolai

2018-05-01

Solar sailing is an unique form of spacecraft (SC) propulsion that uses the free and limitless supply of photons from the Sun. The investigation of near-the-Sun space properties is of the great scientific interest. It can be realized by help of solar sailing. We present the numerical simulation of several closed modelled trajectories of a spacecraft with a controlled solar sail to reach out of ecliptic plane, to flight over the Sun north and south poles and return to the Earth.

Solar sail time-optimal interplanetary transfer trajectory design

International Nuclear Information System (INIS)

Gong Shengpin; Gao Yunfeng; Li Junfeng

2011-01-01

The fuel consumption associated with some interplanetary transfer trajectories using chemical propulsion is not affordable. A solar sail is a method of propulsion that does not consume fuel. Transfer time is one of the most pressing problems of solar sail transfer trajectory design. This paper investigates the time-optimal interplanetary transfer trajectories to a circular orbit of given inclination and radius. The optimal control law is derived from the principle of maximization. An indirect method is used to solve the optimal control problem by selecting values for the initial adjoint variables, which are normalized within a unit sphere. The conditions for the existence of the time-optimal transfer are dependent on the lightness number of the sail and the inclination and radius of the target orbit. A numerical method is used to obtain the boundary values for the time-optimal transfer trajectories. For the cases where no time-optimal transfer trajectories exist, first-order necessary conditions of the optimal control are proposed to obtain feasible solutions. The results show that the transfer time decreases as the minimum distance from the Sun decreases during the transfer duration. For a solar sail with a small lightness number, the transfer time may be evaluated analytically for a three-phase transfer trajectory. The analytical results are compared with previous results and the associated numerical results. The transfer time of the numerical result here is smaller than the transfer time from previous results and is larger than the analytical result.

Extension of Earth-Moon libration point orbits with solar sail propulsion

NARCIS (Netherlands)

Heiligers, M.J.; Macdonald, Malcolm; Parker, Jeffrey S.

2016-01-01

This paper presents families of libration point orbits in the Earth-Moon system that originate from complementing the classical circular restricted three-body problem with a solar sail. Through the use of a differential correction scheme in combination with a continuation on the solar sail

SETI via Leakage from Light Sails in Exoplanetary Systems

OpenAIRE

Guillochon, James F.; Loeb, Abraham

2015-01-01

The primary challenge of rocket propulsion is the burden of needing to accelerate the spacecraft's own fuel, resulting in only a logarithmic gain in maximum speed as propellant is added to the spacecraft. Light sails offer an attractive alternative in which fuel is not carried by the spacecraft, with acceleration being provided by an external source of light. By artificially illuminating the spacecraft with beamed radiation, speeds are only limited by the area of the sail, heat resistance of ...

Design and Development of NEA Scout Solar Sail Deployer Mechanism

Science.gov (United States)

Sobey, Alexander R.; Lockett, Tiffany Russell

2016-01-01

The 6U (approx.10 cm x 20 cm x 30 cm) cubesat Near Earth Asteroid (NEA) Scout1, projected for launch in September 2018 aboard the maiden voyage of the Space Launch System, will utilize a solar sail as its main method of propulsion throughout its approx.3-year mission to a Near Earth Asteroid. Due to the extreme volume constraints levied onto the mission, an acutely compact solar sail deployment mechanism has been designed to meet the volume and mass constraints, as well as provide enough propulsive solar sail area and quality in order to achieve mission success. The design of such a compact system required the development of approximately half a dozen prototypes in order to identify unforeseen problems, advance solutions, and build confidence in the final design product. This paper focuses on the obstacles of developing a solar sail deployment mechanism for such an application and the lessons learned from a thorough development process. The lessons presented will have significant applications beyond the NEA Scout mission, such as the development of other deployable boom mechanisms and uses for gossamer-thin films in space.

Kiteships, sailing vessels pulled and powered with a kite

Energy Technology Data Exchange (ETDEWEB)

Winter, F. de; Swenson, R.B.; Culp, D.

1999-07-01

Current windpower technology and future petroleum supply scenarios make it likely that it will become desirable to consider sailing vessels again for the merchant marine. For the wind-powered propulsion it seems possible to use tethered kites, instead of the traditional combination of masts and booms supporting a system of sails. This may be both safer and more cost-effective. The authors are on boat No. 2 in an R and D program aimed at this large scale application, and the present paper represents a progress report. Boat No. 1 was used to achieve speed and power, achieving a speed of 33 knots (over 60 km per hour), and sailing speeds at times of twice the wind velocity. Boat No. 2 will not be used for speed, but for the development of kite deployment and retrieval techniques, with kites of up to 300 sq ft (28 sq m) in surface area.

Dynamics and Control of a Flexible Solar Sail

Directory of Open Access Journals (Sweden)

Jiafu Liu

2014-01-01

Full Text Available Solar sail can merely make use of solar radiation pressure (SRP force as the thrust for space missions. The attitude dynamics is obtained for the highly flexible solar sail with control vanes, sliding masses, and a gimbaled control boom. The vibration equations are derived considering the geometric nonlinearity of the sail structure subjected to the forces generated by the control vanes, solar radiation pressure (SRP, and sliding masses. Then the dynamic models for attitude/vibration controller design and dynamic simulation are obtained, respectively. The linear quadratic regulator (LQR based and optimal proportional-integral (PI based controllers are designed for the coupled attitude/vibration models with constant disturbance torques caused by the center-of-mass (cm/center-of-pressure (cp offset, respectively. It can be concluded from the theoretical analysis and simulation results that the optimal PI based controller performs better than the LQR based controller from the view of eliminating the steady-state errors. The responses with and without the geometrical nonlinearity are performed, and the differences are observed and analyzed. And some suggestions are also presented.

Advanced Materials and Production Technology for Very Large Solar Sail Structures, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Solar sails are an attractive means for propulsion of future spacecraft. One potential device for deploying and supporting very large solar sails is the CoilAble...

Escape trajectories of solar sails and general relativity

Energy Technology Data Exchange (ETDEWEB)

Kezerashvili, Roman Ya. [Physics Department, New York City College of Technology, City University of New York, 300 Jay Street, Brooklyn, NY 11201 (United States); Graduate School and University Center, City University of New York, 365 Fifth Avenue, New York, NY 10016 (United States); Vazquez-Poritz, Justin F., E-mail: jvazquez-poritz@citytech.cuny.ed [Physics Department, New York City College of Technology, City University of New York, 300 Jay Street, Brooklyn, NY 11201 (United States); Graduate School and University Center, City University of New York, 365 Fifth Avenue, New York, NY 10016 (United States)

2009-11-16

General relativity can have a significant impact on the long-range escape trajectories of solar sails deployed near the sun. For example, spacetime curvature in the vicinity of the sun can cause a solar sail traveling from about 4 solar radii to 2550 AU to be deflected by on the order of a million kilometers, and should therefore be taken into account at the beginning of the mission. There are a number of smaller general relativistic effects, such as frame dragging due to the slow rotation of the sun which can cause a deflection of more than one thousand kilometers.

Recent Progress in Heliogyro Solar Sail Structural Dynamics

Science.gov (United States)

Wilkie, William K.; Warren, Jerry E.; Horta, Lucas G.; Juang, Jer-Nan; Gibbs, Samuel C.; Dowell, E.; Guerrant, Daniel; Lawrence Dale

2014-01-01

Results from recent National Aeronautics and Space Administration (NASA) research on the structural dynamics and control characteristics of heliogyro solar sails are summarized. Specific areas under investigation include coupled nonlinear finite element analysis of heliogyro membrane blade with solar radiation pressure effects, system identification of spinning membrane structures, solarelastic stability analysis of heliogyro solar sails, including stability during blade deployment, and results from small-scale in vacuo dynamics experiments with spinning high-aspect ratio membranes. A low-cost, rideshare payload heliogyro technology demonstration mission concept, used as a mission context for these heliogyro structural dynamics and solarelasticity investigations, is also described.

Escape trajectories of solar sails and general relativity

International Nuclear Information System (INIS)

Kezerashvili, Roman Ya.; Vazquez-Poritz, Justin F.

2009-01-01

General relativity can have a significant impact on the long-range escape trajectories of solar sails deployed near the sun. For example, spacetime curvature in the vicinity of the sun can cause a solar sail traveling from about 4 solar radii to 2550 AU to be deflected by on the order of a million kilometers, and should therefore be taken into account at the beginning of the mission. There are a number of smaller general relativistic effects, such as frame dragging due to the slow rotation of the sun which can cause a deflection of more than one thousand kilometers.

Sailing comfort through axe bow

NARCIS (Netherlands)

Verdult, E.

2012-01-01

Every year, the Royal Netherlands Sea Rescue Institution (KNRM) heads out to sea 2000 times to rescue people. In conditions with high waves, the lifeboats hit the water so hard that the crew have diffilty keeping upright in the pilot house. Sailing slowly is therefore the only option. But the boats

Temperature-Driven Shape Changes of the Near Earth Asteroid Scout Solar Sail

Science.gov (United States)

Stohlman, Olive R.; Loper, Erik R.; Lockett, Tiffany E.

2017-01-01

Near Earth Asteroid Scout (NEA Scout) is a NASA deep space Cubesat, scheduled to launch on the Exploration Mission 1 flight of the Space Launch System. NEA Scout will use a deployable solar sail as its primary propulsion system. The sail is a square membrane supported by rigid metallic tapespring booms, and analysis predicts that these booms will experience substantial thermal warping if they are exposed to direct sunlight in the space environment. NASA has conducted sunspot chamber experiments to confirm the thermal distortion of this class of booms, demonstrating tip displacement of between 20 and 50 centimeters in a 4-meter boom. The distortion behavior of the boom is complex and demonstrates an application for advanced thermal-structural analysis. The needs of the NEA Scout project were supported by changing the solar sail design to keep the booms shaded during use of the solar sail, and an additional experiment in the sunspot chamber is presented in support of this solution.

Fixed-axis electric sail deployment dynamics analysis using hub-mounted momentum control

Science.gov (United States)

Fulton, JoAnna; Schaub, Hanspeter

2018-03-01

The deployment dynamics of a spin stabilized electric sail (E-sail) with a hub-mounted control actuator are investigated. Both radial and tangential deployment mechanisms are considered to take the electric sail from a post-launch stowed configuration to a fully deployed configuration. The tangential configuration assumes the multi-kilometer tethers are wound up on the exterior of the spacecraft hub, similar to yo-yo despinner configurations. The deployment speed is controlled through the hub rate. The radial deployment configuration assumes each tether is on its own spool. Here both the hub and spool rate are control variables. The sensitivity of the deployment behavior to E-sail length, maximum rate and tension parameters is investigated. A constant hub rate deployment is compared to a time varying hub rate that maintains a constant tether tension condition. The deployment time can be reduced by a factor of 2 or more by using a tension controlled deployment configuration.

Sail Training: A Systematic Review

Science.gov (United States)

Manu Schijf; Allison, Pete; Von Wald, Kris

2017-01-01

Starting around 2000, research activity about sail training increased such that there is now sufficient research on the subject to constitute a foundation upon which an emerging body of literature can be identified. The literature has the potential to be utilized to influence program design, policy, theory, and practice--a growing area of youth…

The effect of motion on presence during virtual sailing for advanced training

NARCIS (Netherlands)

Mulder, F.A.; Verlinden, J.C.; Dukalski, R.R.

2012-01-01

This paper explores the amount of motion simulation required to influence presence and immersion on a dinghy sailing simulator. We specifically focused on the effects of roll, pitch and heave, when sailing an course with up-, side-and down-wind sections in a virtual environment. A real dingy was

Numerical Analysis of Magnetic Sail Spacecraft

International Nuclear Information System (INIS)

Sasaki, Daisuke; Yamakawa, Hiroshi; Usui, Hideyuki; Funaki, Ikkoh; Kojima, Hirotsugu

2008-01-01

To capture the kinetic energy of the solar wind by creating a large magnetosphere around the spacecraft, magneto-plasma sail injects a plasma jet into a strong magnetic field produced by an electromagnet onboard the spacecraft. The aim of this paper is to investigate the effect of the IMF (interplanetary magnetic field) on the magnetosphere of magneto-plasma sail. First, using an axi-symmetric two-dimensional MHD code, we numerically confirm the magnetic field inflation, and the formation of a magnetosphere by the interaction between the solar wind and the magnetic field. The expansion of an artificial magnetosphere by the plasma injection is then simulated, and we show that the magnetosphere is formed by the interaction between the solar wind and the magnetic field expanded by the plasma jet from the spacecraft. This simulation indicates the size of the artificial magnetosphere becomes smaller when applying the IMF.

The circular loxodromic lines of the torus – Brunelleschi's constructive principle?

Directory of Open Access Journals (Sweden)

Nevena Radojevic

2015-07-01

-dimensional transformation of a toric surface (the outer sail we suddenly arrive at a hypothetical torus with the major diameter of exact 10 Florentine braccia and the minore one that measures exactly 2 braccia and a half. This form has been verified by overlaying the thus constructed NURBS 3d model to the point cloud MESH model, and the result was very satisfactory (of course for the inner sail because the outer one is not visible at this time.A further study, of this "hypothetical" torus, and in order to make a purely constructive hypothesis, made us understand how it would also be possible to build by using only chords, because it has some very special features. The ribs of the dome present the Villarceau's circumferences of the toric sail, which are also the rhumb lines of the torus. As we know, a rhumb line is described by a constant step (in the ratio between length and height on any surface. Translated in the "standard" size of bricks, these curves may have the slope of 1:2 or 1: 4 (the brick put crosswise, while it is particularly complex to achieve different gradients.In our case, of sail built onto a dodecagon's side, the slope of the circular rhumb line is given by half the internal angle (360°/12/2=15°, which corresponds to the slope of 1: 3.73 ratio. By making the slope of 1: 4 ratio - from the center of the polygon, we reach a point on its side that is located0.19 braccia of its vertex. That measure corresponds exactly to the size of the detected rib's width of 0.38 braccia (2x0.19.This particular circular rhumb line, might have given the enormous constructive advantages in phase of realization. In fact it allows (in theory to determine, all the points in the space that belong to the toric surface, by using only a cord attached in the center of the related circumference and the correct position of bricks. So, that way, the construction place becomes a research site on these particular curves, that produced particular knowledge that might be used later during the construction

Relativistic solar sails

Science.gov (United States)

Güémez, J.; Fiolhais, M.

2018-05-01

We apply the four-vector formalism of special relativity to describe various interaction processes of photons with a solar sail, in two cases: when the sail’s surface is a perfect mirror, and when it is a body coated with a totally absorbing material. We stress the pedagogical value of implementing simultaneously both the linear momentum and the energy conservation in a covariant fashion, as our formalism inherently does. It also allows for a straightforward change of the description of a certain process in different inertial reference frames.

Electric solar-wind sail for asteroid touring missions and planetary protection

Science.gov (United States)

Janhunen, P.

2014-07-01

The electric solar-wind sail (electric sail, E-sail [1,2]) is a relatively new concept for moving around in the solar system without consuming propellant and by using the thrust provided by the natural solar wind to produce propulsion. The E-sail is based on deploying, using the centrifugal force, a set of long, thin metallic tethers and charging them to high positive voltage by actively removing negative charge from the system by an electron gun. To make the tethers resistant towards inevitable wire cuts by micrometeoroids, they must be made by bonding from multiple (typically 4) thin (25--50 μ m) aluminium wires. Production of the tethers was a technical challenge which was recently overcome. According to present numerical estimates, the E-sail could produce up to 1 N of propellantless thrust out of less than 200 kg package which is enough to give characteristic acceleration of 1 mm/s^2 to a spacecraft weighing 1 tonne, thus producing 30 km/s of delta-v per year. The thrust scales as ˜ 1/r where r is the solar distance. There are ways to control and vector the thrust enough to enable inward and outward spiralling missions in the solar system. The E-sail working principle has been indirectly measured in a laboratory, and ESTCube-1 CubeSat experiment is underway in orbit (in late March 2014 it was waiting to be started) to measure the E-sail thrust acting on a short 10-m long tether. A full-scale mission requires ˜ 1000 km of tether altogether (weighing ˜10 kg). The production of a 1-km piece of tether has been demonstrated in laboratory [3]. If the E-sail holds up its present promise, it would be ideally suited for asteroid missions because it enables production of similar level of thrust than ion engines, but needs only a small fraction of the electric power and never runs out of propellant because it does not use any (the ''propellant'' being the natural solar-wind plasma flow). Here we consider especially a mission which would tour the asteroid belt for a

A control-theoretic outlook at the no-go zone in sailing vessels

DEFF Research Database (Denmark)

Yang, Bin; Xiao, Lin; Jouffroy, Jerome

2011-01-01

Sailing vessels, due to their particular propulsive mechanism, gradually lose power as they face the wind, i.e. when they are in the so-called “no-go zone”. Interestingly, dynamical models of sailing vessels, which are usually quite complex, all have in common this no-go zone effect. Using...

Enhancement of Presence in a Virtual Sailing Environment through Localized Wind Simulation

NARCIS (Netherlands)

Verlinden, J.C.; Mulder, F.A.; Vergeest, J.S.; De Jonge, A.; Krutiy, D.; Nagy, Z.; Logeman, B.J.; Schouten, P.

2013-01-01

In the context of sailing, wind plays an important role. However, there is little knowledge on how wind influences presence – the sense of “being there” - while immersed in a virtual setting. This article explores several wind parameters and presents a wind array to explore presence in a sail

Sustained Manned Mars Presence Enabled by E-sail Technology and Asteroid Water Mining

Science.gov (United States)

Janhunen, Pekka; Merikallio, Sini; Toivanen, Petri; Envall, M. Jouni

The Electric Solar Wind Sail (E-sail) can produce 0.5-1 N of inexhaustible and controllable propellantless thrust [1]. The E-sail is based on electrostatic Coulomb interaction between charged thin tethers and solar wind ions. It was invented in 2006, was developed to TRL 4-5 in 2011-2013 with ESAIL FP7 project (http://www.electric-sailing.fi/fp7) and a CubeSat small-scale flight test is in course (ESTCube-1). The E-sail provides a flexible and efficient way of moving 0-2 tonne sized cargo payloads in the solar system without consuming propellant. Given the E-sail, one could use it to make manned exploration of the solar system more affordable by combining it with asteroid water mining. One first sends a miner spacecraft to an asteroid or asteroids, either by E-sail or traditional means. Many asteroids are known to contain water and liberating it only requires heating the material one piece at a time in a leak tight container. About 2 tonne miner can produce 50 tonnes of water per year which is sufficient to sustain continuous manned traffic between Earth and Mars. If the ice-bearing asteroid resides roughly at Mars distance, it takes 3 years for a 0.7 N E-sailer to transport a 10 tonne water/ice payload to Mars orbit or Earth C3 orbit. Thus one needs a fleet of 15 E-sail transport spacecraft plus replacements to ferry 50 tonnes of water yearly to Earth C3 (1/3) and Mars orbit (2/3). The mass of one transporter is 300 kg [2]. One needs to launch max 1.5 tonne mass of new E-sail transporters per year and in practice much less since it is simple to reuse them. This infrastructure is enough to supply 17 tonnes of water yearly at Earth C3 and 33 tonnes in Mars orbit. Orbital water can be used by manned exploration in three ways: (1) for potable water and for making oxygen, (2) for radiation shielding, (3) for LH2/LOX propellant. Up to 75 % of the wet mass of the manned module could be water (50 % propellant and 25 % radiation shield water). On top of this the total mass

Multiple NEO Rendezvous Using Solar Sails

Science.gov (United States)

Johnson, Les; Alexander, Leslie; Fabisinski, Leo; Heaton, Andy; Miernik, Janie; Stough, Rob; Wright, Roosevelt; Young, Roy

2012-01-01

Mission concept is to assess the feasibility of using solar sail propulsion to enable a robotic precursor that would survey multiple Near Earth Objects (NEOs) for potential future human visits. Single spacecraft will rendezvous with and image 3 NEOs within 6 years of launch

Sails and norm minima of lattices

International Nuclear Information System (INIS)

German, O N

2005-01-01

It is known that a real number is badly approximable if and only if its partial quotients are uniformly bounded. In this paper an analogous assertion is proved for the so-called sails, which is one of the most natural multidimensional generalizations of continued fractions.

75 FR 41373 - Special Local Regulations for Marine Events; Port Huron to Mackinac Island Sail Race

Science.gov (United States)

2010-07-16

...-AA08 Special Local Regulations for Marine Events; Port Huron to Mackinac Island Sail Race AGENCY: Coast... regulation for the annual Port Huron to Mackinac Island Sail Race. This action is necessary to safely control... the Port Sector Detroit has determined that the start of the Port Huron to Mackinac Island Sail Race...

The Coupled Orbit-Attitude Dynamics and Control of Electric Sail in Displaced Solar Orbits

Directory of Open Access Journals (Sweden)

Mingying Huo

2017-01-01

Full Text Available Displaced solar orbits for spacecraft propelled by electric sails are investigated. Since the propulsive thrust is induced by the sail attitude, the orbital and attitude dynamics of electric-sail-based spacecraft are coupled and required to be investigated together. However, the coupled dynamics and control of electric sails have not been discussed in most published literatures. In this paper, the equilibrium point of the coupled dynamical system in displaced orbit is obtained, and its stability is analyzed through a linearization. The results of stability analysis show that only some of the orbits are marginally stable. For unstable displaced orbits, linear quadratic regulator is employed to control the coupled attitude-orbit system. Numerical simulations show that the proposed strategy can control the coupled system and a small torque can stabilize both the attitude and orbit. In order to generate the control force and torque, the voltage distribution problem is studied in an optimal framework. The numerical results show that the control force and torque of electric sail can be realized by adjusting the voltage distribution of charged tethers.

Lessons for Interstellar Travel from the Guidance and Control Design of the Near Earth Asteroid Scout Solar Sail Mission

Science.gov (United States)

Diedrich, Benjamin; Heaton, Andrew

2017-01-01

NASA is developing the Near Earth Asteroid (NEA) Scout mission that will use a solar sail to travel to an asteroid where it will perform a slow flyby to acquire science imagery. A guidance and control system was developed to meet the science and trajectory requirements. The NEA Scout design process can be applied to an interstellar or precursor mission that uses a beam propelled sail. The scientific objectives are met by accurately targeting the destination trajectory position and velocity. The destination is targeted by understanding the force on the sail from the beam (or sunlight in the case of NEA Scout) over the duration of the thrust maneuver. The propulsive maneuver is maintained by accurate understanding of the torque on the sail, which is a function of sail shape, optical properties, and mass properties, all of which apply to NEA Scout and beam propelled sails. NEA Scout uses active control of the sail attitude while trimming the solar torque, which could be used on a beamed propulsion sail if necessary. The biggest difference is that NEA Scout can correct for uncertainties in sail thrust modeling, spacecraft orbit, and target orbit throughout the flight to the target, while beamed propulsion needs accurate operation for the short duration of the beamed propulsion maneuver, making accurate understanding of the sail thrust and orbits much more critical.

Economic feasibility of sail power devices on Great Lakes bulk carriers

Energy Technology Data Exchange (ETDEWEB)

None

1982-09-22

Three ships were examined, the ED RYERSON, the ST. CLAIR, and the STEWART CORT to determine if retro-fitting these ships with a 3000 sq ft soft sail cat rig is economically feasible. By using existing weather data taken from recorded observations on Lake Michigan and Lake Superior and known performance characteristics of both the sailplan and hull, a computer program was written to model the problem. Three cases for each ship were estimated. The first was the average fuel savings, second was an optimistic estimate of fuel savings, and the third was a pessimistic estimate of fuel savings. Several considerations had to be taken into account that had serious consequences for the economic viability of the idea. One was the fact that all of the aforementioned ships have self unloading equipment that require about 80% of the deck space to be clear. This limited the choice of sailplans to one per ship. Another consideration is that due to bridge clearance problems an air draft of less than 125' was required. These two factors limited the size and efficiency of the sail plan. The third consideration is that due to the very tight shipping channels on the Great Lakes, there is no provision for altering course to take advantage of prevailing winds in order to maximize the usefulness of the sail device. The sail device on the ED RYERSON does not seem to be economically feasible. Even at the lowest interest rate investigated in this study (8%) the average annual cost improves only in the optimistic estimates. At 12% interest even this slight advantage disappears. The sail devices on the STEWART CORT and ST. CLAIR seem to be marginally feasible at low interest rates and the present cost of fuel. The STEWART CORT seems to benefit most from the fitting of a sail device. A modest increase in fuel prices, perhaps possible, will make both of these ships look substantially better.

Coupled attitude-orbit dynamics and control for an electric sail in a heliocentric transfer mission.

Science.gov (United States)

Huo, Mingying; Zhao, Jun; Xie, Shaobiao; Qi, Naiming

2015-01-01

The paper discusses the coupled attitude-orbit dynamics and control of an electric-sail-based spacecraft in a heliocentric transfer mission. The mathematical model characterizing the propulsive thrust is first described as a function of the orbital radius and the sail angle. Since the solar wind dynamic pressure acceleration is induced by the sail attitude, the orbital and attitude dynamics of electric sails are coupled, and are discussed together. Based on the coupled equations, the flight control is investigated, wherein the orbital control is studied in an optimal framework via a hybrid optimization method and the attitude controller is designed based on feedback linearization control. To verify the effectiveness of the proposed control strategy, a transfer problem from Earth to Mars is considered. The numerical results show that the proposed strategy can control the coupled system very well, and a small control torque can control both the attitude and orbit. The study in this paper will contribute to the theory study and application of electric sail.

A novel experimental mechanics method for measuring the light pressure acting on a solar sail membrane

Science.gov (United States)

Shi, Aiming; Jiang, Li; Dowell, Earl H.; Qin, Zhixuan

2017-02-01

Solar sail is a high potential `sailing craft' for interstellar exploration. The area of the first flight solar sail demonstrator named "IKAROS" is 200 square meters. Future interplanetary missions will require solar sails at least on the order of 10000 square meters (or larger). Due to the limitation of ground facilities, the size of experimental sample should not be large. Furthermore the ground experiments have to be conducted in gravitational field, so the gravity effect must be considered in a ground test. To obtain insight into the solar sail membrane dynamics, a key membrane flutter (or limit cycle oscillations) experiment with light forces acting on it must be done. But one big challenge is calibrating such a tiny light force by as a function of the input power. In this paper, a gravity-based measuring method for light pressure acting on membrane is presented. To explain the experimental principle, an ideal example of a laser beam with expanders and a metal film is studied. Based on calculations, this experimental mechanics method for calibrating light pressure with an accuracy of 0.01 micro-Newton may be realized by making the light force balance the gravity force on the metal films. This gravity-based measuring method could not only be applied to study the dynamics characteristics of solar sail membrane structure with different light forces, but could also be used to determine more accurate light forces/loads acting on solar sail films and hence to enhance the determination of the mechanical properties of the solar sail membrane structure.

[Estimation of forest canopy chlorophyll content based on PROSPECT and SAIL models].

Science.gov (United States)

Yang, Xi-guang; Fan, Wen-yi; Yu, Ying

2010-11-01

The forest canopy chlorophyll content directly reflects the health and stress of forest. The accurate estimation of the forest canopy chlorophyll content is a significant foundation for researching forest ecosystem cycle models. In the present paper, the inversion of the forest canopy chlorophyll content was based on PROSPECT and SAIL models from the physical mechanism angle. First, leaf spectrum and canopy spectrum were simulated by PROSPECT and SAIL models respectively. And leaf chlorophyll content look-up-table was established for leaf chlorophyll content retrieval. Then leaf chlorophyll content was converted into canopy chlorophyll content by Leaf Area Index (LAD). Finally, canopy chlorophyll content was estimated from Hyperion image. The results indicated that the main effect bands of chlorophyll content were 400-900 nm, the simulation of leaf and canopy spectrum by PROSPECT and SAIL models fit better with the measured spectrum with 7.06% and 16.49% relative error respectively, the RMSE of LAI inversion was 0. 542 6 and the forest canopy chlorophyll content was estimated better by PROSPECT and SAIL models with precision = 77.02%.

‘Physics on board’ sets sail!

CERN Multimedia

2009-01-01

In 2005, Italy’s National Institute for Nuclear Physics (INFN) introduced a fun new educational initiative called ‘Physics on board’. CERN is now also on board, coordinating the project’s extension to European level and the participation of scientists from Portugal, Spain and France. School children at the Civitavecchia stopover (27/04/09), taking part in one of the ‘Physics on board ‘ activities, the ‘winch’, used to measure the multiplication factor of their own pulling force.‘Physics on board’ is a science outreach project with the aim of stimulating young people’s interest in physics by transforming a sailing yacht into a real-life travelling laboratory, specially designed with secondary-school children in mind. The ‘Adriatica’ is a vessel made famous by the Italian TV show Velisti per Caso, presented by Patrizio Roversi and Syusi Blady on Rai 3. As they sail up and down the Italian coastline, scientists f...

Attitude Operation Results of Solar Sail Demonstrator IKAROS

Science.gov (United States)

Saiki, Takanao; Tsuda, Yuichi; Funase, Ryu; Mimasu, Yuya; Shirasawa, Yoji; Ikaros Demonstration Team,

This paper shows the attitude operation results of Japanese interplanetary solar sail demonstration spacecraft IKAROS. IKAROS was launched on 21 May 2010(JST) aboard an H-IIA rocket, together with the AKATSUKI Venus climate orbiter. As IKAROS is the secondary payload, the development cost and period were restricted and the onboard attitude system is very simple. This paper introduces the attitude determination and control system. And as IKAROS is spin type spacecraft and it has the large membrane, the attitude control is not easy and it is very important to determine the long-term attitude plan in advance. This paper also shows the outline of the IKAROS attitude operation plan and its operation results.

Momentum Management for the NASA Near Earth Asteroid Scout Solar Sail Mission

Science.gov (United States)

Heaton, Andrew; Diedrich, Benjamin L.; Orphee, Juan; Stiltner, Brandon; Becker, Christopher

2017-01-01

The Momentum Management (MM) system is described for the NASA Near Earth Asteroid Scout (NEA Scout) cubesat solar sail mission. Unlike many solar sail mission proposals that used solar torque as the primary or only attitude control system, NEA Scout uses small reaction wheels (RW) and a reaction control system (RCS) with cold gas thrusters, as described in the abstract "Solar Sail Attitude Control System for Near Earth Asteroid Scout Cubesat Mission." The reaction wheels allow fine pointing and higher rates with low mass actuators to meet the science, communication, and trajectory guidance requirements. The MM system keeps the speed of the wheels within their operating margins using a combination of solar torque and the RCS.

Sailing Vessel Routing Considering Safety Zone and Penalty Time for Altering Course

Directory of Open Access Journals (Sweden)

Marcin Zyczkowski

2017-06-01

Full Text Available In this paper we introduce new model for simulation sea vessel routing. Besides a vessel types (polar diagram and weather forecast, travel security and the number of maneuvers are considered. Based on these data both the minimal travelling costs and the minimal processing time are found for different vessels and different routes. To test our model the applications SailingAssistance wad improved. The obtained results shows that we can obtain quite acceptable results.

Relativistic Light Sails

Energy Technology Data Exchange (ETDEWEB)

Kipping, David, E-mail: dkipping@astro.columbia.edu [Department of Astronomy, Columbia University, 550 W. 120th St., New York, NY 10027 (United States)

2017-06-01

One proposed method for spacecraft to reach nearby stars is by accelerating sails using either solar radiation pressure or directed energy. This idea constitutes the thesis behind the Breakthrough Starshot project, which aims to accelerate a gram-mass spacecraft up to one-fifth the speed of light toward Proxima Centauri. For such a case, the combination of the sail’s low mass and relativistic velocity renders previous treatments incorrect at the 10% level, including that of Einstein himself in his seminal 1905 paper introducing special relativity. To address this, we present formulae for a sail’s acceleration, first in response to a single photon and then extended to an ensemble. We show how the sail’s motion in response to an ensemble of incident photons is equivalent to that of a single photon of energy equal to that of the ensemble. We use this principle of ensemble equivalence for both perfect and imperfect mirrors, enabling a simple analytic prediction of the sail’s velocity curve. Using our results and adopting putative parameters for Starshot , we estimate that previous relativistic treatments underestimate the spacecraft’s terminal velocity by ∼10% for the same incident energy. Additionally, we use a simple model to predict the sail’s temperature and diffraction beam losses during the laser firing period; this allows us to estimate that, for firing times of a few minutes and operating temperatures below 300°C (573 K), Starshot will require a sail that absorbs less than one in 260,000 photons.

Relativistic Light Sails

International Nuclear Information System (INIS)

Kipping, David

2017-01-01

One proposed method for spacecraft to reach nearby stars is by accelerating sails using either solar radiation pressure or directed energy. This idea constitutes the thesis behind the Breakthrough Starshot project, which aims to accelerate a gram-mass spacecraft up to one-fifth the speed of light toward Proxima Centauri. For such a case, the combination of the sail’s low mass and relativistic velocity renders previous treatments incorrect at the 10% level, including that of Einstein himself in his seminal 1905 paper introducing special relativity. To address this, we present formulae for a sail’s acceleration, first in response to a single photon and then extended to an ensemble. We show how the sail’s motion in response to an ensemble of incident photons is equivalent to that of a single photon of energy equal to that of the ensemble. We use this principle of ensemble equivalence for both perfect and imperfect mirrors, enabling a simple analytic prediction of the sail’s velocity curve. Using our results and adopting putative parameters for Starshot , we estimate that previous relativistic treatments underestimate the spacecraft’s terminal velocity by ∼10% for the same incident energy. Additionally, we use a simple model to predict the sail’s temperature and diffraction beam losses during the laser firing period; this allows us to estimate that, for firing times of a few minutes and operating temperatures below 300°C (573 K), Starshot will require a sail that absorbs less than one in 260,000 photons.

77 FR 18984 - Special Local Regulation for Marine Events; Yorktown Parade of Sail, York River; Yorktown, VA

Science.gov (United States)

2012-03-29

...-AA08 Special Local Regulation for Marine Events; Yorktown Parade of Sail, York River; Yorktown, VA... proposes to establish special local regulation during the Yorktown Parade of Sail, a parade of five tall... sponsor the ``Yorktown Parade of Sail'' on the waters of York River. The event will consist of...

Quantifying external focus of attention in sailing by means of action sport cameras

NARCIS (Netherlands)

Pluijms, Joost; Canal Bruland, R.; Hoozemans, M.J.M.; Beek, M.; Brocker, K.; Savelsbergh, G.J.P.

2016-01-01

The aim of the current study was twofold: (1) to validate the use of action sport cameras for quantifying focus of visual attention in sailing and (2) to apply this method to examine whether an external focus of attention is associated with better performance in upwind sailing. To test the validity

Alternative SAIL-Trp for robust aromatic signal assignment and determination of the χ2 conformation by intra-residue NOEs

International Nuclear Information System (INIS)

Miyanoiri, Yohei; Takeda, Mitsuhiro; Jee, JunGoo; Ono, Akira M.; Okuma, Kosuke; Terauchi, Tsutomu; Kainosho, Masatsune

2011-01-01

Tryptophan (Trp) residues are frequently found in the hydrophobic cores of proteins, and therefore, their side-chain conformations, especially the precise locations of the bulky indole rings, are critical for determining structures by NMR. However, when analyzing [U– 13 C, 15 N]-proteins, the observation and assignment of the ring signals are often hampered by excessive overlaps and tight spin couplings. These difficulties have been greatly alleviated by using stereo-array isotope labeled (SAIL) proteins, which are composed of isotope-labeled amino acids optimized for unambiguous side-chain NMR assignment, exclusively through the 13 C– 13 C and 13 C– 1 H spin coupling networks (Kainosho et al. in Nature 440:52–57, 2006). In this paper, we propose an alternative type of SAIL-Trp with the [ζ2,ζ3- 2 H 2 ; δ1,ε3,η2- 13 C 3 ; ε1- 15 N]-indole ring ([ 12 C γ, 12 C ε2 ] SAIL-Trp), which provides a more robust way to correlate the 1 H β , 1 H α , and 1 H N to the 1 H δ1 and 1 H ε3 through the intra-residue NOEs. The assignment of the 1 H δ1 / 13 C δ1 and 1 H ε3 / 13 C ε3 signals can thus be transferred to the 1 H ε1 / 15 N ε1 and 1 H η2 / 13 C η2 signals, as with the previous type of SAIL-Trp, which has an extra 13 C at the C γ of the ring. By taking advantage of the stereospecific deuteration of one of the prochiral β-methylene protons, which was 1 H β2 in this experiment, one can determine the side-chain conformation of the Trp residue including the χ 2 angle, which is especially important for Trp residues, as they can adopt three preferred conformations. We demonstrated the usefulness of [ 12 C γ , 12 C ε2 ] SAIL-Trp for the 12 kDa DNA binding domain of mouse c-Myb protein (Myb-R2R3), which contains six Trp residues.

Alternative SAIL-Trp for robust aromatic signal assignment and determination of the χ(2) conformation by intra-residue NOEs.

Science.gov (United States)

Miyanoiri, Yohei; Takeda, Mitsuhiro; Jee, JunGoo; Ono, Akira M; Okuma, Kosuke; Terauchi, Tsutomu; Kainosho, Masatsune

2011-12-01

Tryptophan (Trp) residues are frequently found in the hydrophobic cores of proteins, and therefore, their side-chain conformations, especially the precise locations of the bulky indole rings, are critical for determining structures by NMR. However, when analyzing [U-(13)C,(15)N]-proteins, the observation and assignment of the ring signals are often hampered by excessive overlaps and tight spin couplings. These difficulties have been greatly alleviated by using stereo-array isotope labeled (SAIL) proteins, which are composed of isotope-labeled amino acids optimized for unambiguous side-chain NMR assignment, exclusively through the (13)C-(13)C and (13)C-(1)H spin coupling networks (Kainosho et al. in Nature 440:52-57, 2006). In this paper, we propose an alternative type of SAIL-Trp with the [ζ2,ζ3-(2)H(2); δ1,ε3,η2-(13)C(3); ε1-(15)N]-indole ring ([(12)C (γ,) ( 12) C(ε2)] SAIL-Trp), which provides a more robust way to correlate the (1)H(β), (1)H(α), and (1)H(N) to the (1)H(δ1) and (1)H(ε3) through the intra-residue NOEs. The assignment of the (1)H(δ1)/(13)C(δ1) and (1)H(ε3)/(13)C(ε3) signals can thus be transferred to the (1)H(ε1)/(15)N(ε1) and (1)H(η2)/(13)C(η2) signals, as with the previous type of SAIL-Trp, which has an extra (13)C at the C(γ) of the ring. By taking advantage of the stereospecific deuteration of one of the prochiral β-methylene protons, which was (1)H(β2) in this experiment, one can determine the side-chain conformation of the Trp residue including the χ(2) angle, which is especially important for Trp residues, as they can adopt three preferred conformations. We demonstrated the usefulness of [(12)C(γ),(12)C(ε2)] SAIL-Trp for the 12 kDa DNA binding domain of mouse c-Myb protein (Myb-R2R3), which contains six Trp residues.

Three-Axis Attitude Control of Solar Sails Utilising Reflectivity Control Devices

Science.gov (United States)

Theodorou, Theodoros

Solar sails are spacecraft that utilise the Solar Radiation Pressure, the force generated by impinging photons, to propel themselves. Conventional actuators are not suitable for controlling the attitude of solar sails therefore specific attitude control methods have been devised to tackle this. One of these methods is to change the centre of pressure with respect to the center of mass thus creating a torque. Reflectivity Control Devices (RCDs) have been proposed and successfully used to change the centre of pressure. Current methods that utilise RCDs have control authority over two axis only with no ability to control the torque about the normal of the sail surface. This thesis extends the state of the art and demonstrates 3-axis control by generating arbitrary torque vectors within a convex polyhedron. Two different RCD materials are considered, transmission and diffusion technologies both compatible with the proposed concept. A number of metrics have been developed which facilitate the comparison of different sail configurations. One of these metics is the sun map which is a graphic representation of the sun angles for which control authority is maintained. An iterative design process is presented which makes use of the metrics developed and aids in the design of a sail which meets the mission requirements and constraints. Moreover, the effects of different parameters on the performance of the proposed control concept are discussed. For example it is shown that by alternating the angle between the edge and middle RCDs the control authority increases. The concept's scalability has been investigated and a hybrid control scheme has been devised which makes use of both RCDs and reaction wheels. The RCDs are complemented by the reaction wheels to achieve higher slew rates while in turn the RCDs desaturate the reaction wheels. Finally, a number of simulations are conducted to verify the validity of the proposed concept.

Multi-Objective Weather Routing of Sailing Vessels

Directory of Open Access Journals (Sweden)

Życzkowski Marcin

2017-12-01

Full Text Available The paper presents a multi-objective deterministic method of weather routing for sailing vessels. Depending on a particular purpose of sailboat weather routing, the presented method makes it possible to customize the criteria and constraints so as to fit a particular user’s needs. Apart from a typical shortest time criterion, safety and comfort can also be taken into account. Additionally, the method supports dynamic weather data: in its present version short-term, mid-term and long-term term weather forecasts are used during optimization process. In the paper the multi-objective optimization problem is first defined and analysed. Following this, the proposed method solving this problem is described in detail. The method has been implemented as an online SailAssistance application. Some representative examples solutions are presented, emphasizing the effects of applying different criteria or different values of customized parameters.

"Light sail" acceleration reexamined.

Science.gov (United States)

Macchi, Andrea; Veghini, Silvia; Pegoraro, Francesco

2009-08-21

The dynamics of the acceleration of ultrathin foil targets by the radiation pressure of superintense, circularly polarized laser pulses is investigated by analytical modeling and particle-in-cell simulations. By addressing self-induced transparency and charge separation effects, it is shown that for "optimal" values of the foil thickness only a thin layer at the rear side is accelerated by radiation pressure. The simple "light sail" model gives a good estimate of the energy per nucleon, but overestimates the conversion efficiency of laser energy into monoenergetic ions.

'Light Sail' Acceleration Reexamined

International Nuclear Information System (INIS)

Macchi, Andrea; Veghini, Silvia; Pegoraro, Francesco

2009-01-01

The dynamics of the acceleration of ultrathin foil targets by the radiation pressure of superintense, circularly polarized laser pulses is investigated by analytical modeling and particle-in-cell simulations. By addressing self-induced transparency and charge separation effects, it is shown that for 'optimal' values of the foil thickness only a thin layer at the rear side is accelerated by radiation pressure. The simple 'light sail' model gives a good estimate of the energy per nucleon, but overestimates the conversion efficiency of laser energy into monoenergetic ions.

Interplanetary Radiation and Internal Charging Environment Models for Solar Sails

Science.gov (United States)

Minow, Joseph I.; Altstatt, Richard L.; NeegaardParker, Linda

2005-01-01

A Solar Sail Radiation Environment (SSRE) model has been developed for defining charged particle environments over an energy range from 0.01 keV to 1 MeV for hydrogen ions, helium ions, and electrons. The SSRE model provides the free field charged particle environment required for characterizing energy deposition per unit mass, charge deposition, and dose rate dependent conductivity processes required to evaluate radiation dose and internal (bulk) charging processes in the solar sail membrane in interplanetary space. Solar wind and energetic particle measurements from instruments aboard the Ulysses spacecraft in a solar, near-polar orbit provide the particle data over a range of heliospheric latitudes used to derive the environment that can be used for radiation and charging environments for both high inclination 0.5 AU Solar Polar Imager mission and the 1.0 AU L1 solar missions. This paper describes the techniques used to model comprehensive electron, proton, and helium spectra over the range of particle energies of significance to energy and charge deposition in thin (less than 25 micrometers) solar sail materials.

Surface sediment chemistry in the Olympic Games 2004 Sailing Center (Saronikos Gulf

Directory of Open Access Journals (Sweden)

A.P. KARAGEORGIS

2003-06-01

Full Text Available Construction of the Olympic Games 2004 Sailing Center is planned in the Saronikos Gulf, in the area of Agios Kosmas. A multi-disciplinary base-line study was carried out to provide background levels of inorganic and organic pollutants before the construction. Two shallow reefs (water depth 2-3 m are the predominant features in the area’s underwater topography. The reef consists of solid rock formations and pebbles, whereas sandy sediments cover predominantly the remaining seabed. Some pockets of fine-grained sand were identified within the existing marina. Sedimentary heavy metal contents were found to be low, showing only slight heavy metal enrichment, attributed mainly to heavy mineral abundance in the area. A small enrichment for lead could be related to anthropogenic sources. Patterns of low concentrations were observed for organic carbon and organic nitrogen. Conversely, the sediment petroleum hydrocarbon content was found to be relatively high, implying anthropogenic pollution related to ship effluents and increased marine traffic.

Electric sail elliptic displaced orbits with advanced thrust model

Science.gov (United States)

Niccolai, Lorenzo; Quarta, Alessandro A.; Mengali, Giovanni

2017-09-01

This paper analyzes the performance of an Electric Solar Wind Sail for generating and maintaining an elliptic, heliocentric, displaced non-Keplerian orbit. In this sense, this paper extends and completes recent studies regarding the performances of an Electric Solar Wind Sail that covers a circular, heliocentric, displaced orbit of given characteristics. The paper presents the general equations that describe the elliptic orbit maintenance in terms of both spacecraft attitude and performance requirements, when a refined thrust model (recently proposed for the preliminary mission design) is taken into account. In particular, the paper also discusses some practical applications on particular mission scenarios in which an analytic solution of the governing equations has been found.

76 FR 62298 - Special Local Regulations; Line of Sail Marine Parade, East River and Brunswick River, Brunswick, GA

Science.gov (United States)

2011-10-07

...-AA08 Special Local Regulations; Line of Sail Marine Parade, East River and Brunswick River, Brunswick... during the Line of Sail Marine Parade on Saturday, October 8, 2011. The marine parade will consist of... did not receive notice of the Line of Sail Marine Parade with sufficient time to publish an NPRM or to...

Coastal Fishermen as Lifesavers While Sailing at High Speed: A Crossover Study

Directory of Open Access Journals (Sweden)

Ramón Fungueiriño-Suárez

2018-01-01

Full Text Available Purpose. Starting basic cardiopulmonary resuscitation (CPR early improves survival. Fishermen are the first bystanders while at work. Our objective was to test in a simulated scenario the CPR quality performed by fishermen while at port and while navigating at different speeds. Methods. Twenty coastal fishermen were asked to perform 2 minutes of CPR (chest compressions and mouth-to-mouth ventilations on a manikin, in three different scenarios: (A at port on land, (B on the boat floor sailing at 10 knots, and (C sailing at 20 knots. Data was recorded using quality CPR software, adjusted to current CPR international guidelines. Results. The quality of CPR (QCPR was significantly higher at port (43%±10 than sailing at 10 knots (30%±15; p=0.01 or at 20 knots (26%±12; p=0.001. The percentage of ventilation that achieved some lung insufflation was also significantly higher when CPR was done at port (77%±14 than while sailing at 10 knots (59%±18 or 20 knots (57%±21 (p=0.01. Conclusion. In the event of drowning or cardiac arrest on a small boat, fishermen should immediately start basic CPR and navigate at a relatively high speed to the nearest port if the sea conditions are safe.

Prediction of velocity and attitude of a yacht sailing upwind by computational fluid dynamics

Directory of Open Access Journals (Sweden)

Heebum Lee

2016-01-01

Full Text Available One of the most important factors in sailing yacht design is accurate velocity prediction. Velocity prediction programs (VPP's are widely used to predict velocity of sailing yachts. VPP's, which are primarily based on experimental data and experience of long years, however suffer limitations when applied in realistic conditions. Thus, in the present study, a high fidelity velocity prediction method using computational fluid dynamics (CFD was proposed. Using the developed method, velocity and attitude of a 30 feet sloop yacht, which was developed by Korea Research Institute of Ship and Ocean (KRISO and termed KORDY30, were predicted in upwind sailing condition.

46 CFR 169.721 - Storm sails and halyards (exposed and partially protected waters only).

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Storm sails and halyards (exposed and partially... § 169.721 Storm sails and halyards (exposed and partially protected waters only). (a) Unless clearly unsuitable, each vessel must have one storm trysail of appropriate size. It must be sheeted independently of...

Design and Characterization of a Small-Scale Solar Sail Prototype by Integrating NiTi SMA and Carbon Fibre Composite

Directory of Open Access Journals (Sweden)

Girolamo Costanza

2017-01-01

Full Text Available Solar sails are propellantless systems where the propulsive force is given by the momentum exchange of reflecting photons. In this study, a self-deploying system based on NiTi shape memory wires and sheets has been designed and manufactured. A small-scale prototype of solar sail with carbon fibre loom has been developed. Different configurations have been tested to optimize material and structure design of the small-scale solar sail. In particular the attention has been focused on the surface/weight ratio and the deployment of the solar sail. By reducing weight and enlarging the surface, it is possible to obtain high values of characteristic acceleration that is one of the main parameters for a successful use of the solar sail as propulsion system. Thanks to the use of shape memory alloys for self-actuation of the system, complexity of the structure itself decreases. Moreover, sail deployment is simpler.

Formation flying for electric sails in displaced orbits. Part II: Distributed coordinated control

Science.gov (United States)

Wang, Wei; Mengali, Giovanni; Quarta, Alessandro A.; Yuan, Jianping

2017-09-01

We analyze a cooperative control framework for electric sail formation flying around a heliocentric displaced orbit, aiming at observing the polar region of a celestial body. The chief spacecraft is assumed to move along an elliptic displaced orbit, while each deputy spacecraft adjusts its thrust vector (that is, both its sail attitude and characteristic acceleration) in order to track a prescribed relative trajectory. The relative motion of the electric sail formation system is formulated in the chief rotating frame, where the control inputs of each deputy are the relative sail attitude angles and the relative lightness number with respect to those of the chief. The information exchange among the spacecraft, characterized by the communication topology, is represented by a weighted graph. Two typical cases, according to whether the communication graph is directed or undirected, are discussed. For each case, a distributed coordinated control law is designed in such a way that each deputy not only tracks the chief state, but also makes full use of information from its neighbors, thus increasing the redundancy and robustness of the formation system in case of failure among the communication links. Illustrative examples show the effectiveness of the proposed approach.

Dietary supplementation and doping-related factors in high-level sailing

Directory of Open Access Journals (Sweden)

Rodek Jelena

2012-12-01

Full Text Available Abstract Background Although dietary supplements (DSs in sports are considered a natural need resulting from athletes’ increased physical demands, and although they are often consumed by athletes, data on DS usage in Olympic sailing are scarce. The aim of this study was to study the use of and attitudes towards DSs and doping problems in high-level competitive sailing. Methods The sample consisted of 44 high-level sailing athletes (5 of whom were female; total mean age 24.13 ± 6.67 years and 34 coaches (1 of whom was female; total mean age 37.01 ± 11.70. An extensive, self-administered questionnaire of substance use was used, and the subjects were asked about sociodemographic data, sport-related factors, DS-related factors (i.e., usage of and knowledge about DSs, sources of information, and doping-related factors. The Kruskal-Wallis ANOVA was used to determine the differences in group characteristics, and Spearman’s rank order correlation and a logistic regression analysis were used to define the relationships between the studied variables. Results DS usage is relatively high. More than 77% of athletes consume DSs, and 38% do so on a regular basis (daily. The athletes place a high degree of trust in their coaches and/or physicians regarding DSs and doping. The most important reason for not consuming DSs is the opinion that DSs are useless and a lack of knowledge about DSs. The likelihood of doping is low, and one-third of the subjects believe that doping occurs in sailing (no significant differences between athletes and coaches. The logistic regression found crew number (i.e., single vs. double crew to be the single significant predictor of DS usage, with a higher probability of DS consumption among single crews. Conclusion Because of the high consumption of DSs future investigations should focus on real nutritional needs in sailing sport. Also, since athletes reported that their coaches are the primary source of information about

27 CFR 555.207 - Construction of type 1 magazines.

Science.gov (United States)

2010-04-01

... constructed of, or covered with, a nonsparking material. (3) Wood frame wall construction. The exterior of... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Construction of type 1... Construction of type 1 magazines. A type 1 magazine is a permanent structure: a building, an igloo or “Army...

Hybrids of Solar Sail, Solar Electric, and Solar Thermal Propulsion for Solar-System Exploration

Science.gov (United States)

Wilcox, Brian H.

2012-01-01

Solar sails have long been known to be an attractive method of propulsion in the inner solar system if the areal density of the overall spacecraft (S/C) could be reduced to approx.10 g/sq m. It has also long been recognized that the figure (precise shape) of useful solar sails needs to be reasonably good, so that the reflected light goes mostly in the desired direction. If one could make large reflective surfaces with reasonable figure at an areal density of approx.10 g/sq m, then several other attractive options emerge. One is to use such sails as solar concentrators for solar-electric propulsion. Current flight solar arrays have a specific output of approx. 100W/kg at 1 Astronomical Unit (AU) from the sun, and near-term advances promise to significantly increase this figure. A S/C with an areal density of 10 g/sq m could accelerate up to 29 km/s per year as a solar sail at 1 AU. Using the same sail as a concentrator at 30 AU, the same spacecraft could have up to approx. 45 W of electric power per kg of total S/C mass available for electric propulsion (EP). With an EP system that is 50% power-efficient, exhausting 10% of the initial S/C mass per year as propellant, the exhaust velocity is approx. 119 km/s and the acceleration is approx. 12 km/s per year. This hybrid thus opens attractive options for missions to the outer solar system, including sample-return missions. If solar-thermal propulsion were perfected, it would offer an attractive intermediate between solar sailing in the inner solar system and solar electric propulsion for the outer solar system. In the example above, both the solar sail and solar electric systems don't have a specific impulse that is near-optimal for the mission. Solar thermal propulsion, with an exhaust velocity of the order of 10 km/s, is better matched to many solar system exploration missions. This paper derives the basic relationships between these three propulsion options and gives examples of missions that might be enabled by

Dynamic and optical characterization of dusty plasmas for use as solar sails

International Nuclear Information System (INIS)

Sheldon, Robert; Thomas, Edward Jr.; Abbas, Mian; Gallagher, Dennis; Adrian, Mark; Craven, Paul

2002-01-01

Solar sails presently have mass loadings of 5 gm/m2 that, when including the support structure and payload, could easily average to >10 gm/m2. For reasonably sized spacecraft, the critical parameter is the total mass per total area, which when combined with the reflectivity, yield the true acceleration. We propose that dusty plasmas trapped in a 'Mini-Magnetosphere' (Winglee, 2000) can produce a solar sail with a total mass loading <0.01 gm/m2, and reflectivities of ∼1%. This configuration provides an acceleration equivalent to a standard sail of 95% reflectivity with <1 gm/m2. However, the physics of dusty plasma sails is not mature and several important questions need to be resolved before a large scale effort is warranted. Foremost among these questions are, what is the largest force a dusty plasma can sustain before it demagnetizes and separates from the binding magnetic field; what are the charging properties of dust under solar UV conditions; what is the light scattering cross section for the dust; what is the optimum dust grain size for magnetization and scattering; and, what are the optimum dust grain materials? We outline what we know about dusty plasmas, and what we are hoping to learn from two existing dusty plasma experiments at the National Space Science and Technology Center (NSSTC) and Auburn University

Bibliography of the SAIL Panama Canal Zone Project 2008 : a selected bibliography.

OpenAIRE

DeHart, Liz

2009-01-01

During the 18th Annual 2008 SAIL meeting at the Smithsonian Tropical Research Institute in Panama, Vielka Chang-Yau, librarian, mentioned the need to digitize and make available through the Aquatic Commons some of the early documents related to the U.S. biological survey of Panama from 1910 to 1912. With the assistance of SAIL, a regional marine librarian’s group, a digital project developed and this select bibliography represents the sources used for the project. It will assist research...

Deceleration of High-velocity Interstellar Photon Sails into Bound Orbits at α Centauri

Energy Technology Data Exchange (ETDEWEB)

Heller, René [Max Planck Institute for Solar System Research Justus-von-Liebig-Weg 3, 37077 Göttingen (Germany); Hippke, Michael, E-mail: heller@mps.mpg.de, E-mail: hippke@ifda.eu [Luiter Straße 21b, 47506 Neukirchen-Vluyn (Germany)

2017-02-01

At a distance of about 4.22 ly, it would take about 100,000 years for humans to visit our closest stellar neighbor Proxima Centauri using modern chemical thrusters. New technologies are now being developed that involve high-power lasers firing at 1 gram solar sails in near-Earth orbits, accelerating them to 20% the speed of light ( c ) within minutes. Although such an interstellar probe could reach Proxima 20 years after launch, without propellant to slow it down it would traverse the system within hours. Here we demonstrate how the stellar photon pressures of the stellar triple α Cen A, B, and C (Proxima) can be used together with gravity assists to decelerate incoming solar sails from Earth. The maximum injection speed at α Cen A to park a sail with a mass-to-surface ratio ( σ ) similar to graphene (7.6 × 10{sup −4} gram m{sup −2}) in orbit around Proxima is about 13,800 km s{sup −1} (4.6% c ), implying travel times from Earth to α Cen A and B of about 95 years and another 46 years (with a residual velocity of 1280 km s{sup −1}) to Proxima. The size of such a low- σ sail required to carry a payload of 10 grams is about 10{sup 5} m{sup 2} = (316 m){sup 2}. Such a sail could use solar photons instead of an expensive laser system to gain interstellar velocities at departure. Photogravitational assists allow visits of three stellar systems and an Earth-sized potentially habitable planet in one shot, promising extremely high scientific yields.

Deceleration of High-velocity Interstellar Photon Sails into Bound Orbits at α Centauri

International Nuclear Information System (INIS)

Heller, René; Hippke, Michael

2017-01-01

At a distance of about 4.22 ly, it would take about 100,000 years for humans to visit our closest stellar neighbor Proxima Centauri using modern chemical thrusters. New technologies are now being developed that involve high-power lasers firing at 1 gram solar sails in near-Earth orbits, accelerating them to 20% the speed of light ( c ) within minutes. Although such an interstellar probe could reach Proxima 20 years after launch, without propellant to slow it down it would traverse the system within hours. Here we demonstrate how the stellar photon pressures of the stellar triple α Cen A, B, and C (Proxima) can be used together with gravity assists to decelerate incoming solar sails from Earth. The maximum injection speed at α Cen A to park a sail with a mass-to-surface ratio ( σ ) similar to graphene (7.6 × 10"−"4 gram m"−"2) in orbit around Proxima is about 13,800 km s"−"1 (4.6% c ), implying travel times from Earth to α Cen A and B of about 95 years and another 46 years (with a residual velocity of 1280 km s"−"1) to Proxima. The size of such a low- σ sail required to carry a payload of 10 grams is about 10"5 m"2 = (316 m)"2. Such a sail could use solar photons instead of an expensive laser system to gain interstellar velocities at departure. Photogravitational assists allow visits of three stellar systems and an Earth-sized potentially habitable planet in one shot, promising extremely high scientific yields.

LQR pitch control strategy of AUVs based on the optimum of sailing resistance

Directory of Open Access Journals (Sweden)

YAO Xuliang

2017-05-01

Full Text Available When an Autonomous Underwater Vehicle(AUV sails near the surface of the sea,it will inevitably be subjected to wave disturbance. The heave and pitch motion caused by wave disturbance not only affects the navigation attitude of the AUV,but also leads to an increase in sailing resistance. As such, its energy consumption is increased. In this paper,the six degrees of freedom model of AUVs is established and linearized in order to achieve the weighted optimization of the sailing attitude and the resistance of the AUVs. The drag force model of the AUV is derived using the theory of potential flow. The Q matrix and R matrix are determined in the controller based on research into the drag force model. The Linear Quadratic Regulator(LQRcontroller of the AUV is designed using the drag force model as the performance index. The simulation results show that after adding the LQR controller,the effects of reducing heave motion and pitch motion are 46.64% and 77.62% respectively, and the increased resistance caused by the pitch motion is reduced to 1/6 of its original value. The results show that the multiple optimum of attitude and sailing resistance is realized,the energy consumption is decreased and the endurance of the AUV is increased.

Making and Executing Decisions for Safe and Independent Living (MED-SAIL): development and validation of a brief screening tool.

Science.gov (United States)

Mills, Whitney L; Regev, Tziona; Kunik, Mark E; Wilson, Nancy L; Moye, Jennifer; McCullough, Laurence B; Naik, Aanand D

2014-03-01

Older adults prefer to remain in their own homes for as long as possible. The purpose of this article is to describe the development and preliminary validation of Making and Executing Decisions for Safe and Independent Living (MED-SAIL), a brief screening tool for capacity to live safely and independently in the community. Prospective preliminary validation study. Outpatient geriatrics clinic located in a community-based hospital. Forty-nine community-dwelling older adults referred to the clinic for a comprehensive capacity assessment. We examined internal consistency, criterion-based validity, concurrent validity, and accuracy of classification for MED-SAIL. The items included in MED-SAIL demonstrated internal consistency (5 items; α = 0.85). MED-SAIL was significantly correlated with the Independent Living Scales (r = 0.573, p ≤0.001) and instrumental activities of daily living (r = 0.440, p ≤0.01). The Mann-Whitney U test revealed significant differences between the no capacity and partial/full capacity classifications on MED-SAIL (U(48) = 60.5, Z = -0.38, p SAIL as a brief screening tool to identify older adults with impaired capacity for remaining safe and independent in their current living environment. MED-SAIL is useful tool for health and social service providers in the community for the purpose of referral for definitive capacity evaluation. Published by Elsevier Inc.

High energy gain in three-dimensional simulations of light sail acceleration

Energy Technology Data Exchange (ETDEWEB)

Sgattoni, A., E-mail: andrea.sgattoni@polimi.it [Dipartimento di Energia, Politecnico di Milano, Milano (Italy); CNR, Istituto Nazionale di Ottica, u.o.s. “Adriano Gozzini,” Pisa (Italy); Sinigardi, S. [CNR, Istituto Nazionale di Ottica, u.o.s. “Adriano Gozzini,” Pisa (Italy); Dipartimento di Fisica e Astronomia, Università di Bologna, Bologna (Italy); INFN sezione di Bologna, Bologna (Italy); Macchi, A. [CNR, Istituto Nazionale di Ottica, u.o.s. “Adriano Gozzini,” Pisa (Italy); Dipartimento di Fisica “Enrico Fermi,” Università di Pisa, Pisa (Italy)

2014-08-25

The dynamics of radiation pressure acceleration in the relativistic light sail regime are analysed by means of large scale, three-dimensional (3D) particle-in-cell simulations. Differently to other mechanisms, the 3D dynamics leads to faster and higher energy gain than in 1D or 2D geometry. This effect is caused by the local decrease of the target density due to transverse expansion leading to a “lighter sail.” However, the rarefaction of the target leads to an earlier transition to transparency limiting the energy gain. A transverse instability leads to a structured and inhomogeneous ion distribution.

Towing Asteroids with Gravity Tractors Enhanced by Tethers and Solar Sails

Science.gov (United States)

Shen, Haijun; Roithmayr, Carlos M.

2015-01-01

Material collected from an asteroid's surface can be used to increase gravitational attraction between the asteroid and a Gravity Tractor (GT); the spacecraft therefore operates more effectively and is referred to as an Enhanced Gravity Tractor (EGT). The use of tethers and solar sails to further improve effectiveness and simplify operations is investigated. By employing a tether, the asteroidal material can be placed close to the asteroid while the spacecraft is stationed farther away, resulting in a better safety margin and improved thruster efficiency. A solar sail on a spacecraft can naturally provide radial offset and inter-spacecraft separation required for multiple EGTs.

High energy gain in three-dimensional simulations of light sail acceleration

International Nuclear Information System (INIS)

Sgattoni, A.; Sinigardi, S.; Macchi, A.

2014-01-01

The dynamics of radiation pressure acceleration in the relativistic light sail regime are analysed by means of large scale, three-dimensional (3D) particle-in-cell simulations. Differently to other mechanisms, the 3D dynamics leads to faster and higher energy gain than in 1D or 2D geometry. This effect is caused by the local decrease of the target density due to transverse expansion leading to a “lighter sail.” However, the rarefaction of the target leads to an earlier transition to transparency limiting the energy gain. A transverse instability leads to a structured and inhomogeneous ion distribution.

One kilometer (1 km) electric solar wind sail tether produced automatically.

Science.gov (United States)

Seppänen, Henri; Rauhala, Timo; Kiprich, Sergiy; Ukkonen, Jukka; Simonsson, Martin; Kurppa, Risto; Janhunen, Pekka; Hæggström, Edward

2013-09-01

We produced a 1 km continuous piece of multifilament electric solar wind sail tether of μm-diameter aluminum wires using a custom made automatic tether factory. The tether comprising 90,704 bonds between 25 and 50 μm diameter wires is reeled onto a metal reel. The total mass of 1 km tether is 10 g. We reached a production rate of 70 m/24 h and a quality level of 1‰ loose bonds and 2‰ rebonded ones. We thus demonstrated that production of long electric solar wind sail tethers is possible and practical.

Becoming a Coach in Developmental Adaptive Sailing: A Lifelong Learning Perspective.

Science.gov (United States)

Duarte, Tiago; Culver, Diane M

2014-10-02

Life-story methodology and innovative methods were used to explore the process of becoming a developmental adaptive sailing coach. Jarvis's (2009) lifelong learning theory framed the thematic analysis. The findings revealed that the coach, Jenny, was exposed from a young age to collaborative environments. Social interactions with others such as mentors, colleagues, and athletes made major contributions to her coaching knowledge. As Jenny was exposed to a mixture of challenges and learning situations, she advanced from recreational para-swimming instructor to developmental adaptive sailing coach. The conclusions inform future research in disability sport coaching, coach education, and applied sport psychology.

Would you like to learn to sail?

CERN Multimedia

Yachting Club

2011-01-01

Registration for the 2011 lottery for YCC sailing courses has opened and it already looks as if similar numbers will try their luck as for past seasons. But don't be deterred, the Lottery is completely open and everyone has an equal chance. Please see also the list of courses and places offered. The deadline for registration is March 17th at midday. If you have any questions in advance, contact a Committee member or, better, come and ask the Club Committee representatives (Club permanence) on March 9th from 18:00 until 19:30 in the atrium of CERN building 40. Meanwhile your YCC committee has registered one new boat already, the first test of the current season has already been carried out (yes!) and some intrepid sailors go sailing regularly throughout the winter - it is true that it is a whole different lake at this time: not just temperature, but quality of light, Mont Blanc in a different style and fewer people out there... A few people are planning an early trip to warmer waters soon (like, the Balearics...

A System for Individualizing Instruction. Practical Answers to U-SAIL Implementation Questions. Monograph No. 4.

Science.gov (United States)

Utah System Approach to Individualized Learning Project.

The U-SAIL system is a practical approach to individualization of instruction in which a problem-solving process is employed to install a program in logical sequential phases. U-SAIL is a nationally validated, successfully replicated, cost-feasible system for individualization of instruction which can be implemented in a variety of settings with…

Study of a 30-M Boom For Solar Sail-Craft: Model Extendibility and Control Strategy

Science.gov (United States)

Keel, Leehyun

2005-01-01

Space travel propelled by solar sails is motivated by the fact that the momentum exchange that occurs when photons are reflected and/or absorbed by a large solar sail generates a small but constant acceleration. This acceleration can induce a constant thrust in very large sails that is sufficient to maintain a polar observing satellite in a constant position relative to the Sun or Earth. For long distance propulsion, square sails (with side length greater than 150 meters) can reach Jupiter in two years and Pluto in less than ten years. Converting such design concepts to real-world systems will require accurate analytical models and model parameters. This requires extensive structural dynamics tests. However, the low mass and high flexibility of large and light weight structures such as solar sails makes them unsuitable for ground testing. As a result, validating analytical models is an extremely difficult problem. On the other hand, a fundamental question can be asked. That is whether an analytical model that represents a small-scale version of a solar-sail boom can be extended to much larger versions of the same boom. To answer this question, we considered a long deployable boom that will be used to support the solar sails of the sail-craft. The length of fully deployed booms of the actual solar sail-craft will exceed 100 meters. However, the test-bed we used in our study is a 30 meter retractable boom at MSFC. We first develop analytical models based on Lagrange s equations and the standard Euler-Bernoulli beam. Then the response of the models will be compared with test data of the 30 meter boom at various deployed lengths. For this stage of study, our analysis was limited to experimental data obtained at 12ft and 18ft deployment lengths. The comparison results are positive but speculative. To observe properly validate the analytic model, experiments at longer deployment lengths, up to the full 30 meter, have been requested. We expect the study to answer the

The formation of ice sails

Science.gov (United States)

Fowler, A. C.; Mayer, C.

2017-11-01

Debris-covered glaciers are prone to the formation of a number of supraglacial geomorphological features, and generally speaking, their upper surfaces are far from level surfaces. Some of these features are due to radiation screening or enhancing properties of the debris cover, but theoretical explanations of the consequent surface forms are in their infancy. In this paper we consider a theoretical model for the formation of "ice sails", which are regularly spaced bare ice features which are found on debris-covered glaciers in the Karakoram.

Project Dragonfly: A feasibility study of interstellar travel using laser-powered light sail propulsion

Science.gov (United States)

Perakis, Nikolaos; Schrenk, Lukas E.; Gutsmiedl, Johannes; Koop, Artur; Losekamm, Martin J.

2016-12-01

Light sail-based propulsion systems are a candidate technology for interplanetary and interstellar missions due to their flexibility and the fact that no fuel has to be carried along. In 2014, the Initiative for Interstellar Studies (i4is) hosted the Project Dragonfly Design Competition, which aimed at assessing the feasibility of sending an interstellar probe propelled by a laser-powered light sail to another star system. We analyzed and designed a mission to the Alpha Centauri system, with the objective to carry out science operations at the destination. Based on a comprehensive evaluation of currently available technologies and possible locations, we selected a lunar architecture for the laser system. It combines the advantages of surface- and space-based systems, as it requires no station keeping and suffers no atmospheric losses. We chose a graphene-based sandwich material for the light sail because of its low density. Deceleration of the spacecraft sufficient for science operations at the target system is achieved using both magnetic and electric sails. Applying these assumptions in a simulation leads to the conclusion that 250 kg of scientific payload can be sent to Alpha Centauri within the Project Dragonfly Design Competition's constraints of 100 year travel duration and 100 GW laser beam power. This is only sufficient to fulfill parts of the identified scientific objectives, and therefore renders the usefulness of such a mission questionable. A better sail material or higher laser power would improve the acceleration behavior, an increase in the mission time would allow for larger spacecraft masses.

Alternative SAIL-Trp for robust aromatic signal assignment and determination of the {chi}{sub 2} conformation by intra-residue NOEs

Energy Technology Data Exchange (ETDEWEB)

Miyanoiri, Yohei; Takeda, Mitsuhiro [Nagoya University, Graduate School of Science, Structural Biology Research Center (Japan); Jee, JunGoo; Ono, Akira M.; Okuma, Kosuke; Terauchi, Tsutomu [Tokyo Metropolitan University, Center for Priority Areas (Japan); Kainosho, Masatsune, E-mail: kainosho@nagoya-u.jp [Nagoya University, Graduate School of Science, Structural Biology Research Center (Japan)

2011-12-15

Tryptophan (Trp) residues are frequently found in the hydrophobic cores of proteins, and therefore, their side-chain conformations, especially the precise locations of the bulky indole rings, are critical for determining structures by NMR. However, when analyzing [U-{sup 13}C,{sup 15}N]-proteins, the observation and assignment of the ring signals are often hampered by excessive overlaps and tight spin couplings. These difficulties have been greatly alleviated by using stereo-array isotope labeled (SAIL) proteins, which are composed of isotope-labeled amino acids optimized for unambiguous side-chain NMR assignment, exclusively through the {sup 13}C-{sup 13}C and {sup 13}C-{sup 1}H spin coupling networks (Kainosho et al. in Nature 440:52-57, 2006). In this paper, we propose an alternative type of SAIL-Trp with the [{zeta}2,{zeta}3-{sup 2}H{sub 2}; {delta}1,{epsilon}3,{eta}2-{sup 13}C{sub 3}; {epsilon}1-{sup 15}N]-indole ring ([{sup 12}C{sub {gamma},}{sup 12}C{sub {epsilon}2}] SAIL-Trp), which provides a more robust way to correlate the {sup 1}H{sub {beta}}, {sup 1}H{sub {alpha}}, and {sup 1}H{sub N} to the {sup 1}H{sub {delta}1} and {sup 1}H{sub {epsilon}3} through the intra-residue NOEs. The assignment of the {sup 1}H{sub {delta}1}/{sup 13}C{sub {delta}1} and {sup 1}H{sub {epsilon}3}/{sup 13}C{sub {epsilon}3} signals can thus be transferred to the {sup 1}H{sub {epsilon}1}/{sup 15}N{sub {epsilon}1} and {sup 1}H{sub {eta}2}/{sup 13}C{sub {eta}2} signals, as with the previous type of SAIL-Trp, which has an extra {sup 13}C at the C{sub {gamma}} of the ring. By taking advantage of the stereospecific deuteration of one of the prochiral {beta}-methylene protons, which was {sup 1}H{sub {beta}2} in this experiment, one can determine the side-chain conformation of the Trp residue including the {chi}{sub 2} angle, which is especially important for Trp residues, as they can adopt three preferred conformations. We demonstrated the usefulness of [{sup 12}C{sub {gamma}},{sup 12}C

Communicating LightSail: Embedded Reporting and Web Strategies for Citizen-Funded Space Missions

Science.gov (United States)

Hilverda, M.; Davis, J.

2015-12-01

The Planetary Society (TPS) is a non-profit space advocacy group with a stated mission to "empower the world's citizens to advance space science and exploration." In 2009, TPS began work on LightSail, a small, citizen-funded spacecraft to demonstrate solar sailing propulsion technology. The program included a test flight, completed in June 2015, with a primary mission slated for late 2016. TPS initiated a LightSail public engagement campaign to provide the public with transparent mission updates, and foster educational outreach. A credentialed science journalist was given unrestricted access to the team and data, and provided regular reports without editorial oversight. An accompanying website, sail.planetary.org, provided project updates, multimedia, and real-time spacecraft data during the mission. Design approaches included a clean layout with text optimized for easy reading, balanced by strong visual elements to enhance reader comprehension and interest. A dedicated "Mission Control" page featured social media feeds, links to most recent articles, and a ground track showing the spacecraft's position, including overflight predictions based on user location. A responsive, cross-platform design allowed easy access across a broad range of devices. Efficient web server performance was prioritized by implementing a static content management system (CMS). Despite two spacecraft contingencies, the test mission successfully completed its primary objective of solar sail deployment. Qualitative feedback on the transparent, embedded reporting style was positive, and website metrics showed high user retention times. The website also grew awareness and support for the primary 2016 mission, driving traffic to a Kickstarter campaign that raised $1.24 million. Websites constantly evolve, and changes for the primary mission will include a new CMS to better support multiple authors and a custom dashboard to display real-time spacecraft sensor data.

Windchill-201 - Custom Soft-Type Construction

Science.gov (United States)

Jones, Corey; LaPha, Steven

2013-01-01

This presentation will explain Windchill soft-types-what they are, how they work, and how to construct custom ones, configured specifically for your system. The process and particulars of creating and implementing a WTDocument soft-type will be discussed, and the interaction between soft-types and Windchill objects will be shown.

Use of a virtual reality physical ride-on sailing simulator as a rehabilitation tool for recreational sports and community reintegration: a pilot study.

Science.gov (United States)

Recio, Albert C; Becker, Daniel; Morgan, Marjorie; Saunders, Norman R; Schramm, Lawrence P; McDonald, John W

2013-12-01

Participation in sailing by people with disabilities, particularly in small sailboats, is widely regarded as having positive outcomes on self-esteem and general health for the participants. However, a major hurdle for people with no previous experience of sailing, even by those without disabilities, is the perception that sailing is elitist, expensive, and dangerous. Real-time "ride-on" sailing simulators have the potential to bridge the gap between dry-land and on-the-water sailing. These provide a realistic, safe, and easily supervised medium in which nonsailors can easily and systematically learn the required skills before venturing out on the water. The authors report a 12-wk pilot therapeutic sailing program using the VSail-Access sailing simulation system followed by on-water experience. After completion of the training, all subjects demonstrated the ability to navigate a simple course around marker buoys (triangular configuration) on the computer screen, the ability to sail independently in winds of moderate strength (up to 14 knots) on water, and measurable improvements in their psychologic health. In addition, the subjects were able to participate in a sports activity with their respective family members and experienced a sense of optimism about their future.

Sail Training as Education: More than Mere Adventure

Science.gov (United States)

McCulloch, K.; McLaughlin, P.; Allison, P.; Edwards, V.; Tett, L.

2010-01-01

This paper describes the process and findings of a multinational study of the characteristics of sail training for young people. The study used a structured qualitative method and involved "indigenous practitioner-researchers" who collected the majority of the data. Our findings show that participation provides an opportunity for…

Optimal heliocentric trajectories for solar sail with minimum area

Science.gov (United States)

Petukhov, Vyacheslav G.

2018-05-01

The fixed-time heliocentric trajectory optimization problem is considered for planar solar sail with minimum area. Necessary optimality conditions are derived, a numerical method for solving the problem is developed, and numerical examples of optimal trajectories to Mars, Venus and Mercury are presented. The dependences of the minimum area of the solar sail from the date of departure from the Earth, the time of flight and the departing hyperbolic excess of velocity are analyzed. In particular, for the rendezvous problem (approaching a target planet with zero relative velocity) with zero departing hyperbolic excess of velocity for a flight duration of 1200 days it was found that the minimum area-to-mass ratio should be about 12 m2/kg for trajectory to Venus, 23.5 m2/kg for the trajectory to Mercury and 25 m2/kg for trajectory to Mars.

Sleep restriction and degraded reaction-time performance in Figaro solo sailing races.

Science.gov (United States)

Hurdiel, Rémy; Van Dongen, Hans P A; Aron, Christophe; McCauley, Peter; Jacolot, Laure; Theunynck, Denis

2014-01-01

In solo offshore sailing races like those of the Solitaire du Figaro, sleep must be obtained in multiple short bouts to maintain competitive performance and safety. Little is known about the amount of sleep restriction experienced at sea and the effects that fatigue from sleep loss have on sailors' performance. Therefore, we assessed sleep in sailors of yachts in the Figaro 2 Beneteau class during races and compared response times on a serial simple reaction-time test before and after races. Twelve men (professional sailors) recorded their sleep and measured their response times during one of the three single-handed races of 150, 300 and 350 nautical miles (nominally 24-50 h in duration). Total estimated sleep duration at sea indicated considerable sleep insufficiency. Response times were slower after races than before. The results suggest that professional sailors incur severe sleep loss and demonstrate marked performance impairment when competing in one- to two-day solo sailing races. Competitive performance could be improved by actively managing sleep during solo offshore sailing races.

HORIZONTAL AXIS MARINE CURRENT TURBINE DESIGN FOR WIND-ELECTRIC HYBRID SAILING BOAT

Directory of Open Access Journals (Sweden)

Serkan Ekinci

2017-01-01

Full Text Available In recent decades, the number of theoretical studies and applications on electric power production from renewable sources such as wind, solar, sea and tidal flows, has been increasing rapidly. Marine Current Turbines (MCTs, among the power turbines, produce power from alternating flows and are a means of power production even at lower flow rates in oceans and seas. In this study, while maintaining functional requirements, an initial and detailed design (mechanic and hydrodynamic, of an MCT fixed on a sailing boat and at sail which extracts power from the flow around the boat, is undertaken. In the design stages, for analysis and optimization of the marine turbine blade design, the Momentum Blade Element Method is utilized. The Horizontal Axis Marine Turbine (HAMT, determined by the initial and mechanical design, is illustrated with its components included. Computational fluid dynamics (CFD analyses, covering turbine pod geometry at required flow rates and turbine speeds are performed. These analyses are performed very close to real conditions, considering sailing with and without the turbine running (on and off states. The alternator is determined from the results, and the final design which meets the design requirements, is obtained. As a result, a user friendly and innovative turbine design for sail boats, offering more power and efficiency, which is longer lasting compared to solar and wind technologies, that also makes use of renewable sources, such as wind and/or solar, and in addition stores and uses accumulated energy when needed, is proposed.

Prediction of velocity and attitude of a yacht sailing upwind by computational fluid dynamics

OpenAIRE

Lee, Heebum; Park, Mi Yeon; Park, Sunho; Rhee, Shin Hyung

2016-01-01

One of the most important factors in sailing yacht design is accurate velocity prediction. Velocity prediction programs (VPP's) are widely used to predict velocity of sailing yachts. VPP's, which are primarily based on experimental data and experience of long years, however suffer limitations when applied in realistic conditions. Thus, in the present study, a high fidelity velocity prediction method using computational fluid dynamics (CFD) was proposed. Using the developed method, velocity an...

TRL Assessment of Solar Sail Technology Development Following the 20-Meter System Ground Demonstrator Hardware Testing

Science.gov (United States)

Young, Roy M.; Adams, Charles L.

2010-01-01

The NASA In-Space Propulsion Technology (ISPT) Projects Office sponsored two separate, independent solar sail system design and development demonstration activities during 2002-2005. ATK Space Systems of Goleta, CA was the prime contractor for one development team and L' Garde, Inc. of Tustin, CA was the prime contractor for the other development team. The goal of these activities was to advance the technology readiness level (TRL) of solar sail propulsion from 3 towards 6 by the year 2006. Component and subsystem fabrication and testing were completed successfully, including the ground deployment of 10-meter and 20-meter demonstration hardware systems under vacuum conditions. The deployment and structural testing of the 20-meter solar sail systems was conducted in the 30 meter diameter Space Power Facility thermal-vacuum chamber at NASA Glenn Plum Brook in April though August, 2005. This paper will present the results of the TRL assessment following the solar sail technology development activities associated with the design, development, analysis and testing of the 20-meter system ground demonstrators.

Sail-Type Wind Turbine for Autonomous Power Supplay: Possible Use in Latvia

Science.gov (United States)

Sakipova, S.; Jakovics, A.

2014-12-01

Under the conditions of continuous increase in the energy consumption, sharply rising prices of basic energy products (gas, oil, coal), deterioration of environment, etc., it is of vital importance to develop methods and techniques for heat and power generation from renewables. The paper considers the possibility to use a sail-type wind turbine for autonomous power supply in Latvia, taking into account its climatic conditions. The authors discuss the problems of developing a turbine of the type that would operate efficiently at low winds, being primarily designed to supply power to small buildings and farms distant from centralized electricity networks. The authors consider aerodynamic characteristics of such a turbine and the dependence of the thrust moment of its pilot model on the airflow rate at different angles of attack. The pilot model with a changeable blade shape has been tested and shows a good performance. Darbs veltīts vienam no atjaunojamo enerģiju veidiem - vēja enerģijai, analizētas tās izmantošanas iespējas. Vispirms īsi raksturota vēja enerģijas izmantošana pasaulē, kā arī vērtētas izmantošanas perspektīvas no inženiertehniskā un klimatisko apstākļu viedokļa. Turpinājumā raksturota situācija Latvijā, t. sk., arī vēja potenciāla pieejamība dažādos reģionos, kā arī vēja enerģijas izmantošanas efektivitāti raksturojošie lielumi. Konstatējot problēmu, rast vēja turbīnu risinājumus Latvijas apstākļiem ar maziem vidējiem vēja ātrumiem, izveidots buras tipa turbīnas modelis. Šī modeļa raksturlielumu izpēte veikta vēja tunelī Karagandas universitātē, konstatējot relatīvi labus efektivitātes rādītājus tiešai un pretējai vēja plūsmai. Izmantojot mērījumu rezultātus, ierosināti sistēmas uzlabojumi, kurus plānots pētīt turpmāk. Šādas sistēmas potenciāli var rast lietojumu tur, kur nepieciešami autonomi enerģijas avoti.

SAIL: A Framework for Promoting Next-Generation Word Study

Science.gov (United States)

Ganske, Kathy

2016-01-01

This article introduces SAIL, an instructional framework designed to help teachers optimize students' learning during small-group word study instruction. Small-group word study interactions afford opportunities for teachers to engage students in thinking, talking, advancing vocabulary knowledge (including general academic vocabulary), and making…

Economic Cost of an Algae Bloom Cleanup in China's 2008 Olympic Sailing Venue

Science.gov (United States)

Wang, X. H.; Li, L.; Bao, X.; Zhao, L. D.

2009-07-01

In the summer of 2008, an algae bloom struck the coast of Qingdao, China, where the 2008 Olympic sailing events were to be held. The bloom was caused by the drift and proliferation of the green algae Enteromorpha (see http://precedings.nature.com/documents/2352/version/1). It lasted for more than 1 month and covered nearly the entire sailing venue. The Enteromorpha bloom was so intense that national and local governments invested a tremendous amount of labor and resources in a cleanup effort in order to achieve Olympic Games standards [Hu and He, 2008].

Spontaneous neonatal pneumomediastinum: the "spinnaker sail" sign.

Science.gov (United States)

Lawal, T A; Glüer, S; Reismann, M; Dördelmann, M; Schirg, E; Ure, B

2009-02-01

Spontaneous pneumomediastinum is a rare condition in the newborn, not associated with identifiable trauma or mechanical ventilation. It is diagnosed by a combination of physical examination and confirmatory chest radiograph, with various recognized signs identifiable in this condition. We report the case of a male neonate, who had pneumomediastinum confirmed by the presence of a wind blown spinnaker sail sign and was managed conservatively. We also reviewed the literature.

Thrust calculation of electric solar wind sail by particle-in-cell simulation

Energy Technology Data Exchange (ETDEWEB)

Hoshi, Kento [Kyoto Univ. (Japan). Dept. of Electrical Engineering; Kojima, Hirotsugu; Yamakawa, Hiroshi [Kyoto Univ. (Japan). Research Inst. for Sustainable Humanosphere; Muranaka, Takanobu [Chukyo Univ., Nagoya (Japan). Dept. of Electrical Engineering

2016-07-01

In this study, thrust characteristics of an electric solar wind sail were numerically evaluated using full threedimensional particle-in-cell (PIC) simulation. The thrust obtained from the PIC simulation was lower than the thrust estimations obtained in previous studies. The PIC simulation indicated that ambient electrons strongly shield the electrostatic potential of the tether of the sail, and the strong shield effect causes a greater thrust reduction than has been obtained in previous studies. Additionally, previous expressions of the thrust estimation were modified by using the shielded potential structure derived from the present simulation results. The modified thrust estimation agreed very well with the thrust obtained from the PIC simulation.

Thrust calculation of electric solar wind sail by particle-in-cell simulation

International Nuclear Information System (INIS)

Hoshi, Kento; Kojima, Hirotsugu; Yamakawa, Hiroshi; Muranaka, Takanobu

2016-01-01

In this study, thrust characteristics of an electric solar wind sail were numerically evaluated using full threedimensional particle-in-cell (PIC) simulation. The thrust obtained from the PIC simulation was lower than the thrust estimations obtained in previous studies. The PIC simulation indicated that ambient electrons strongly shield the electrostatic potential of the tether of the sail, and the strong shield effect causes a greater thrust reduction than has been obtained in previous studies. Additionally, previous expressions of the thrust estimation were modified by using the shielded potential structure derived from the present simulation results. The modified thrust estimation agreed very well with the thrust obtained from the PIC simulation.

Ecological dynamics of continuous and categorical decision-making: the regatta start in sailing.

Science.gov (United States)

Araújo, Duarte; Davids, Keith; Diniz, Ana; Rocha, Luis; Santos, João Coelho; Dias, Gonçalo; Fernandes, Orlando

2015-01-01

Ecological dynamics of decision-making in the sport of sailing exemplifies emergent, conditionally coupled, co-adaptive behaviours. In this study, observation of the coupling dynamics of paired boats during competitive sailing showed that decision-making can be modelled as a self-sustained, co-adapting system of informationally coupled oscillators (boats). Bytracing the spatial-temporal displacements of the boats, time series analyses (autocorrelations, periodograms and running correlations) revealed that trajectories of match racing boats are coupled more than 88% of the time during a pre-start race, via continuous, competing co-adaptions between boats. Results showed that both the continuously selected trajectories of the sailors (12 years of age) and their categorical starting point locations were examples of emergent decisions. In this dynamical conception of decision-making behaviours, strategic positioning (categorical) and continuous displacement of a boat over the course in match-race sailing emerged as a function of interacting task, personal and environmental constraints. Results suggest how key interacting constraints could be manipulated in practice to enhance sailors' perceptual attunement to them in competition.

27 CFR 555.209 - Construction of type 3 magazines.

Science.gov (United States)

2010-04-01

... magazines. 555.209 Section 555.209 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO... Construction of type 3 magazines. A type 3 magazine is a “day-box” or other portable magazine. It must be fire-resistant, weather-resistant, and theft-resistant. A type 3 magazine is to be constructed of not less than...

Project SAIL: An Evaluation of a Dropout Prevention Program.

Science.gov (United States)

Thompson, John L.; And Others

Project SAIL (Student Advocates Inspire Learning) is a Title IV-C Project located in Hopkins, Minnesota, designed to prevent students from dropping out of school by keeping them successfully involved in the mainstream environment. This study presents a review of other dropout prevention approaches, describes the intervention strategies involved in…

Recent Advances in Heliogyro Solar Sail Structural Dynamics, Stability, and Control Research

Science.gov (United States)

Wilkie, W. Keats; Warren, Jerry E.; Horta, Lucas G.; Lyle, Karen H.; Juang, Jer-Nan; Gibbs, S. Chad; Dowell, Earl H.; Guerrant, Daniel V.; Lawrence, Dale

2015-01-01

Results from recent NASA sponsored research on the structural dynamics, stability, and control characteristics of heliogyro solar sails are summarized. Specific areas under investigation include coupled nonlinear finite element analysis of heliogyro membrane blade with solar radiation pressure effects, system identification of spinning membrane structures, and solarelastic stability analysis of heliogyro solar sails, including stability during blade deployment. Recent results from terrestrial 1-g blade dynamics and control experiments on "rope ladder" membrane blade analogs, and small-scale in vacuo system identification experiments with hanging and spinning high-aspect ratio membranes will also be presented. A low-cost, rideshare payload heliogyro technology demonstration mission concept is used as a mission context for these heliogyro structural dynamics and solarelasticity investigations, and is also described. Blade torsional dynamic response and control are also shown to be significantly improved through the use of edge stiffening structural features or inclusion of modest tip masses to increase centrifugal stiffening of the blade structure. An output-only system identification procedure suitable for on-orbit blade dynamics investigations is also developed and validated using ground tests of spinning sub-scale heliogyro blade models. Overall, analytical and experimental investigations to date indicate no intractable stability or control issues for the heliogyro solar sail concept.

New applications of the H-reversal trajectory using solar sails

International Nuclear Information System (INIS)

Zeng Xiangyuan; Baoyin Hexi; Li Junfeng; Gong Shengping

2011-01-01

Advanced solar sailing has been an increasingly attractive propulsion system for highly non-Keplerian orbits. Three new applications of the orbital angular momentum reversal (H-reversal) trajectories using solar sails are presented: space observation, heliocentric orbit transfer and collision orbits with asteroids. A theoretical proof for the existence of double H-reversal trajectories (referred to as 'H2RTs') is given, and the characteristics of the H2RTs are introduced before a discussion of the mission applications. A new family of H2RTs was obtained using a 3D dynamic model of the two-body frame. In a time-optimal control model, the minimum period H2RTs both inside and outside the ecliptic plane were examined using an ideal solar sail. Due to the quasi-heliostationary property at its two symmetrical aphelia, the H2RTs were deemed suitable for space observation. For the second application, the heliocentric transfer orbit was able to function as the time-optimal H-reversal trajectory, since its perihelion velocity is a circular or elliptic velocity. Such a transfer orbit can place the sailcraft into a clockwise orbit in the ecliptic plane, with a high inclination or displacement above or below the Sun. The third application of the H-reversal trajectory was simulated impacting an asteroid passing near Earth in a head-on collision. The collision point can be designed through selecting different perihelia or different launch windows. Sample orbits of each application were presented through numerical simulation. The results can serve as a reference for theoretical research and engineering design.

Motives for participation in Paralympic sailing – opinions of Polish and foreign athletes with physical disabilities

Directory of Open Access Journals (Sweden)

Prokopowicz Grzegorz

2016-09-01

Full Text Available Introduction: Paralympic sailing was introduced at the Atlanta 1996 Paralympic Games. Since then it has been developing rapidly and an increasing number of individuals in Poland and abroad regularly take part in sports competitions. Currently, disabled athletes can compete in three classes: Sonar, 2.4mR and Skud 18. The review of the Polish and foreign literature does not give a clear indication of the motives for participation in Paralympic sailing.

AERODYNAMICS OF WING TIP SAILS

Directory of Open Access Journals (Sweden)

MUSHTAK AL-ATABI

2006-06-01

Full Text Available Observers have always been fascinated by soaring birds. An interesting feature of these birds is the existence of few feathers extending from the tip of the wing. In this paper, small lifting surfaces were fitted to the tip of a NACA0012 wing in a fashion similar to that of wing tip feathers. Experimental measurements of induced drag, longitudinal static stability and trailing vortex structure were obtained.The tests showed that adding wing tip surfaces (sails decreased the induced drag factor and increased the longitudinal static stability. Results identified two discrete appositely rotated tip vortices and showed the ability of wing tip surfaces to break them down and to diffuse them.

PENERAPAN PRINSIP-PRINSIP GOOD GOVERNANCE DALAM PELAYANAN PUBLIK DI KANTOR CAMAT SAIL KOTA PEKANBARU

Directory of Open Access Journals (Sweden)

Sri Roserdevi Nasution

2018-02-01

Full Text Available Good Governance is the new face of hearts implement the principles of Public Service in the reform era. Public services Law No. 25 of 2009 is activities or circuit hearts Frame activities Fulfillment Services Under legislation with every citizen Share And Population differences Goods, services, and administrative services or Provided By Operation of Public Service. Public services carried out by the Government showed to society who asked service. Research Type singer is descriptive qualitative approach with, the techniques data collection using depth Interviews and Documentation. Results of Research Singer nearly all the principles of good governance hearts Services Not Running In accordance with From UNDP as Principles of Participation, legal rules, Transparency, Responsiveness, consensus-oriented, fairness, effectiveness, accountability, and strategic vision, Many Are Being inhibit the progress of the Principles of good governance. The conclusion from the findings of research, so authors concluded that the application of good governance in the hearts Implementation Services Head Office Sail Maximum yet. It is because that the singer Leadership And yet the implementation of communication subordinate ones in line so that although Head Already Trying to give the Best but if NOT in Support By subordinates will Difficult accomplished. Lack of human resources is a prayer One That Become an inhibiting factor hearts implementation of the Principles of good governance in the future Head Office Sail.

The Strategies To Advance the Internationalization of Learning (SAIL) Program.

Science.gov (United States)

Ebert, Kenneth B.; Burnett, Jane

This report documents the Strategies to Advance the Internalization of Learning (SAIL) program developed at Michigan State University (MSU) to promote international, comparative, and cross-cultural learning and cross-cultural understanding in the university community. A total of 350 foreign and U.S. students who had international experience…

Project SAIL: A Summer Program Brings History Alive for Students.

Science.gov (United States)

Hollingsworth, Patricia

2001-01-01

This project describes Project SAIL (Schools for Active Interdisciplinary Learning), a federally funded project providing in-depth staff development during a 3-week summer program for teachers, parents, and their gifted/talented economically disadvantaged students. The program theme, "Searching for Patterns in History," has been used with students…

Laser-light sailing and non-stationary power stations applied to robotic star probes

International Nuclear Information System (INIS)

Matloff, Gregory L.

2000-01-01

The light sail has emerged as a leading contender to propel extrasolar expeditions. Because solar-sail performance is limited by the inverse-square law, one-way expeditions to other stars requiring voyage durations of a few centuries or less may be propelled by radiation pressure from a laser beam originating from a location closer to the Sun than the space probe. Maintaining a stationary laser power station in position between Sun and spacecraft for years or decades presents many technical challenges. This paper presents a variation on the laser power station that may be simpler to implement, in which the Sun-pumped laser power station follows the spacecraft on a parabolic or slightly hyperbolic trajectory

THE ASSESSMENT OF DIFFICULTY OF YACHT SAILING CLASSES AND STUDENTS' GLOBAL SELF-ESTEEM

Directory of Open Access Journals (Sweden)

Anna Romanowska-Tolloczko

2015-06-01

Full Text Available Purpose: determination of relationship between the level of students’ global self-esteem and their perception of the degree of difficulty sailing yacht classes. Material and methods: Study consisted of 178 students of University School of Physical Education in Wrocław. The study used two tools: Polish adaptation of SES M. Rosenberg Self-Esteem Scale and a questionnaire designed by the authors of the study. Results: men were characterized by a higher self-esteem than women. Distribution of the results obtained by women was closer to a normal distribution, but it was not completely compatible with it. The relationship was noted between the level of global self-esteem of the students and their perception of the degree of difficulty of the course. People with higher self-esteem assessed the knowledge and skills of sailing as easier. For people with lower levels of self-esteem sailing it was a more difficult. Conclusions: self-acceptance and self-esteem have a substantial impact on goal setting and the perception and taking various tasks. It is therefore important to help young people to build adequate self-esteem and positive self-image, because faith in its own strength and capabilities is a key element in achieving success in every area of life.

Developing a business plan for a company in Finland owned by foreigners. Case: Prime Sails Ltd

OpenAIRE

Honkonen-Kulagina, Alina Linda

2012-01-01

To establish a new company is challenging for any businessman or businesswomen. Starting up a company in a foreign country is twice is hard. The purpose of the thesis is to examine the factors that affect the success of a company newly-established by immigrants. These include such areas as good business plan, market research, cultural knowledge and awareness of the legislative environment. The case study focuses on the company Prime Sails Ltd, which is a supplier of sails. The main ob...

Formation flying for electric sails in displaced orbits. Part I: Geometrical analysis

Science.gov (United States)

Wang, Wei; Mengali, Giovanni; Quarta, Alessandro A.; Yuan, Jianping

2017-09-01

We present a geometrical methodology for analyzing the formation flying of electric solar wind sail based spacecraft that operate in heliocentric, elliptic, displaced orbits. The spacecraft orbit is maintained by adjusting its propulsive acceleration modulus, whose value is estimated using a thrust model that takes into account a variation of the propulsive performance with the sail attitude. The properties of the relative motion of the spacecraft are studied in detail and a geometrical solution is obtained in terms of relative displaced orbital elements, assumed to be small quantities. In particular, for the small eccentricity case (i.e. for a near-circular displaced orbit), the bounds characterized by the extreme values of relative distances are analytically calculated, thus providing an useful mathematical tool for preliminary design of the spacecraft formation structure.

Photogravimagnetic assists of light sails: a mixed blessing for Breakthrough Starshot?

Science.gov (United States)

Forgan, Duncan H.; Heller, René; Hippke, Michael

2018-03-01

Upon entering a star system, light sails are subject to both gravitational forces and radiation pressure, and can use both in concert to modify their trajectory. Moreover, stars possess significant magnetic fields, and if the sail is in any way charged, it will feel the Lorentz force also. We investigate the dynamics of so-called `photogravimagnetic assists' of sailcraft around α Centauri A, a potential first destination en route to Proxima Centauri (the goal of the Breakthrough Starshot programme). We find that a 10-m2 sail with a charge-to-mass ratio of around 10 μC g-1 or higher will need to take account of magnetic field effects during orbital manoeuvres. The magnetic field can provide an extra source of deceleration and deflection, and allow capture on to closer orbits around a target star. However, flipping the sign of the sailcraft's charge can radically change resulting trajectories, resulting in complex loop-de-loops around magnetic field lines and essentially random ejection from the star system. Even on well-behaved trajectories, the field can generate off-axis deflections at α Centauri that, while minor, can result in very poor targeting of the final destination (Proxima) post-assist. Fortunately for Breakthrough Starshot, nanosails are less prone to charging en route than their heavier counterparts, but can still accrue relatively high charge at both the origin and destination, when travelling at low speeds. Photogravimagnetic assists are highly non-trivial, and require careful course correction to mitigate against unwanted changes in trajectory.

Reflexions on feedforward control strategies for a class of sailing vehicles

DEFF Research Database (Denmark)

Xiao, Lin; Jouffroy, Jerome

2010-01-01

Sailing vehicles, whether they are sea or land-based, share the unique property of exhibiting totally different trajectories depending on where their direction of travel is with respect to the wind. Following our previous work, this paper discusses a few points related to feedforward control...

SAIL--A Way to Success and Independence for Low-Achieving Readers.

Science.gov (United States)

Bergman, Janet L.

1992-01-01

Argues that providing students with a repertoire of important learning strategies is one crucial way of helping all students to become independent readers, thinkers, and learners. Describes a third grade reading environment and the practices of the Students Achievement Independent Learning Program (SAIL). (PRA)

A Global Approach for the Design of a Rim- Driven Marine Turbine Generator for Sail Boat

OpenAIRE

DROUEN, Laurent; CHARPENTIER, Jean-Frederic; SEMAIL, Eric; CLENET, Stéphane; SEMAIL, Eric

2012-01-01

International audience; Development of new ways to provide clean onboard electric energy is a key feature for the sailing boat industry and sail race teams. This is why marine turbines (MT), are considered to provide onboard energy. These turbines can be used to harness kinetic energy of the water flow related to the ship motion. In this paper we propose to study an unconventional design of such a turbine where the electrical generator is located in the periphery of the blades and where the m...

NASA's Advanced Solar Sail Propulsion System for Low-Cost Deep Space Exploration and Science Missions that Use High Performance Rollable Composite Booms

Science.gov (United States)

Fernandez, Juan M.; Rose, Geoffrey K.; Younger, Casey J.; Dean, Gregory D.; Warren, Jerry E.; Stohlman, Olive R.; Wilkie, W. Keats

2017-01-01

Several low-cost solar sail technology demonstrator missions are under development in the United States. However, the mass saving derived benefits that composites can offer to such a mass critical spacecraft architecture have not been realized yet. This is due to the lack of suitable composite booms that can fit inside CubeSat platforms and ultimately be readily scalable to much larger sizes, where they can fully optimize their use. With this aim, a new effort focused at developing scalable rollable composite booms for solar sails and other deployable structures has begun. Seven meter booms used to deploy a 90 m2 class solar sail that can fit inside a 6U CubeSat have already been developed. The NASA road map to low-cost solar sail capability demonstration envisioned, consists of increasing the size of these composite booms to enable sailcrafts with a reflective area of up to 2000 m2 housed aboard small satellite platforms. This paper presents a solar sail system initially conceived to serve as a risk reduction alternative to Near Earth Asteroid (NEA) Scout's baseline design but that has recently been slightly redesigned and proposed for follow-on missions. The features of the booms and various deployment mechanisms for the booms and sail, as well as ground support equipment used during testing, are introduced. The results of structural analyses predict the performance of the system under microgravity conditions. Finally, the results of the functional and environmental testing campaign carried out are shown.

The economic potential of a cassette-type-reactor-installed nuclear ice-breaking container ship

International Nuclear Information System (INIS)

Kondo, Koichi; Takamasa, Tomoji

1999-01-01

An improved cassette-type marine reactor MRX (Marine Reactor X) which is currently researched and developed by the Japan Atomic Energy Research Institute is designed to be easily removed and transferred to another ship. If the reactor in a nuclear-powered ship, which is the reason for its higher cost, were replaced by the cassette-type-MRX, the reusability of the MRX would reduce the cost difference between nuclear-powered and diesel ships. As an investigation of one aspect of a cassette-type MRX, we attempted in this study to do an economic review of an MRX-installed nuclear-powered ice-breaking container ship sailing via the Arctic Ocean. The transportation cost between the Far East and Europe to carry one TEU (twenty-foot-equivalent container unit) over the entire life of the ship for an MRX (which is used for a 20-year period)-installed container ship sailing via the Arctic Ocean is about 70% higher than the Suez Canal diesel ship, carrying 8,000 TEU and sailing at 25 knots, and about 10% higher than the Suez Canal diesel ship carrying 4,000 TEU and sailing at 34 knots. The cost for a cassette-type-MRX (which is used for a 40-year period, removed and transferred to a second ship after being used for 20 years in the first ship)-installed nuclear-powered container ship is about 7% lower than that for the one operated for 20 years. Considering any loss or reduction in sales opportunities through the extension of the transportation period, the nuclear-powered container ship via the Arctic Sea is a more suitable means of transportation than a diesel ship sailing at 25 knots via the Suez Canal when the value of the commodities carried exceeds 2,800 dollars per freight ton. (author)

Development in Harbour Construction, Infrastructure and Topography on the Eve of the Early Modern Age in the Baltic (1450-1600)

DEFF Research Database (Denmark)

Springmann, Maik Jens O R

2016-01-01

Ships are no Flying Dutchmen! They need a harbour. Therefore, the development of ship construction is pretty much connected with that of harbour construction, and beyond this, they influence the topography and infrastructure of a harbour. The transition between the Medieval period and the Early M...... construction, topography and infrastructure follow the development of ship construction. The paper focuses on the deep impact that larger multi-mast sailing ships had on the development of Baltic harbours...

Protective Effects of Calcium on Cadmium Accumulation in Co-Cultured Silver Carp (Hypophthalmichthys molitrix) and Triangle Sail Mussel (Hyriopsis cumingii).

Science.gov (United States)

Li, Deliang; Pi, Jie; Wang, Jianping; Zhu, Pengfei; Lei, Liuping; Zhang, Ting; Liu, Deming

2016-12-01

Discovering cost effective strategies to reduce cadmium (Cd) uptake is of great concern for consumer food safety in the aquaculture industry. This study investigated the protective effects of calcium (Ca) on Cd uptake in co-cultured silver carp (Hypophthalmichthys molitrix) and triangle sail mussel (Hyriopsis cumingii). The results show that Ca-depending on its applied concentration-caused a significant decrease in the Cd uptake into muscle (by 48 %-72 %), gills (by 51 %-57 %), liver (by 52 %-81 %) and kidney (by 54 %-81 %) of silver carp (p sail mussels (p sail mussel, the quality of co-cultured edible fish might improve as a consequence of the potentially reduced Cd uptake.

Hydrodynamic Data for Manoeuvring and Control of an AUV Determined by Tank Tests and Free-Sailing Trials

DEFF Research Database (Denmark)

Aage, Christian

1998-01-01

Autonomous Underwater Vehicles (AUV's) can be used for a large number of subsea acitivities in different modes of operation varying from the ROV-mode with on-line control and power supply from the surface, to the true AUV-mode where the vehicle performs its pre-programmed tasks with full autonomy...... manoeuvres, such as turning circles and zigzag tests. Similar free-sailing manoeuvrability trials are described and compared to the simulations. The free-sailing manoeuvres were monitored by the Differential Global Positioning System (DGPS)....

Electrodynamic Tethers and E-Sails as Active Experiment Testbeds and Technologies in Space

Science.gov (United States)

Gilchrist, B. E.; Wiegmann, B.; Johnson, L.; Bilen, S. G.; Habash Krause, L.; Miars, G.; Leon, O.

2017-12-01

The use of small-to-large flexible structures in space such as tethers continues to be studied for scientific and technology applications. Here we will consider tether electrodynamic and electrostatic interactions with magneto-plasmas in ionospheres, magnetospheres, and interplanetary space. These systems are enabling fundamental studies of basic plasma physics phenomena, allowing direct studies of the space environment, and generating technological applications beneficial for science missions. Electrodynamic tethers can drive current through the tether based on the Lorenz force adding or extracting energy from its orbit allowing for the study of charged bodies or plasma plumes moving through meso-sonic magnetoplasmas [1]. Technologically, this also generates propulsive forces requiring no propellant and little or no consumables in any planetary system with a magnetic field and ionosphere, e.g., Jupiter [2]. Further, so called electric sails (E-sails) are being studied to provide thrust through momentum exchange with the hypersonic solar wind. The E-sail uses multiple, very long (10s of km) charged, mostly bare rotating conducting tethers to deflect solar wind protons. It is estimated that a spacecraft could achieve a velocity over 100 km/s with time [3,4]. 1. Banks, P.M., "Review of electrodynamic tethers for space plasma science," J. Spacecraft and Rockets, vol. 26, no. 4, pp. 234-239, 1989. 2. Talley, C., J. Moore, D. Gallagher, and L. Johnson, "Propulsion and power from a rotating electrodynamic tether at Jupiter," 38th AIAA Aerospace Sciences Meeting and Exhibit, January 2000. 3. Janhunen, P., "The electric sail—A new propulsion method which may enable fast missions to the outer solar system," J. British Interpl. Soc., vol. 61, no. 8, pp. 322-325, 2008. 4. Wiegman, B., T. Scheider, A. Heaton, J. Vaughn, N. Stone, and K. Wright, "The Heliopause Electrostatic Rapid Transit System (HERTS)—Design, trades, and analyses performed in a two-year NASA investigation

Interfacing Sail Modules for Use with “Space Tugs”

Directory of Open Access Journals (Sweden)

Florio Dalla Vedova

2018-05-01

Full Text Available The paper introduces and describes the recent and still ongoing development activities performed in Luxembourg for In-Orbit Attach Mechanisms for (Drag Sails Modules to be operated from Space Tugs. After some preparatory work aiming at understanding the possible operational aspects and implications of mating interfaces between these space systems, three possible designs of In-Orbit Attach Mechanisms have been proposed and completed for their 3D (Metal and Plastic Printing, a new manufacturing technology assessed within this project. The Plastic-printed prototype underwent a series of automated tests in which a robotic arm, equipped with an advanced force sensor, replicated four docking scenarii in ideal and degraded modes. The observation of the forces and torque behaviors at and after impact allowed one to characterize the typical patterns for the various contacts but also, to identify a type of potentially dramatic impact for the safety of the docking and its equipment: in the case of the off-axis approach, “point” contacts shall be avoided, as they instantaneously transfer the total kinetic energy in a small area that could break.

Effect of sail on augmenting attitude stability of hovering VTOL vehicle supported by one-ducted-fan. Ductedter dot fan shiji VTOL ki no hover shisei anteisei eno ho no eikyo

Energy Technology Data Exchange (ETDEWEB)

Ando, S.; Kato, M. (Nagoya University, Nagoya (Japan). Faculty of Engineering)

1991-07-05

An analytical investigation was given on augmenting attitude stability of a VTOL airplane supported by one-ducted-fan, at hovering, by means of installing a sail having air resistance on a place higher than the vehicle center-of-gravity. Since the problem becomes nonlinear, the time-marching technique was used. The sail on which the emphasis was placed had an area of as less than several times as much of the duct sectional area, and a height of as less than several times as much of the duct diameter. The stabilization effect is expressed as {Delta}h = center of gravity height region providing the stability/duct diameter. Without a sail, {Delta}h was several percent, but with a sail, the value increased to about ten times as much. This increase in {Delta}h was remarkable in the direction that elevate the position of the center of gravity. More stability is obtained by increasing the sail height than by increasing the area. Substitutes to a sail, working on the same principle, could be a gas-bag and wind mill. A gas-bag, which can change its volume readily, will be able to vary the sail area easily. A wind mill could make the weight lighter than a sail, and has a possibility of varying the resistance through changing its blade pitch angle. 2 refs., 2 figs., 1 tab.

Automated NMR structure determination of stereo-array isotope labeled ubiquitin from minimal sets of spectra using the SAIL-FLYA system

Energy Technology Data Exchange (ETDEWEB)

Ikeya, Teppei [Goethe University Frankfurt am Main, Institute of Biophysical Chemistry, Center for Biomolecular Magnetic Resonance (Germany); Takeda, Mitsuhiro; Yoshida, Hitoshi; Terauchi, Tsutomu; Jee, Jun-Goo; Kainosho, Masatsune [Tokyo Metropolitan University, Graduate School of Science (Japan)], E-mail: kainosho@nmr.chem.metro-u.ac.jp; Guentert, Peter [Goethe University Frankfurt am Main, Institute of Biophysical Chemistry, Center for Biomolecular Magnetic Resonance (Germany)], E-mail: guentert@em.uni-frankfurt.de

2009-08-15

Stereo-array isotope labeling (SAIL) has been combined with the fully automated NMR structure determination algorithm FLYA to determine the three-dimensional structure of the protein ubiquitin from different sets of input NMR spectra. SAIL provides a complete stereo- and regio-specific pattern of stable isotopes that results in sharper resonance lines and reduced signal overlap, without information loss. Here we show that as a result of the superior quality of the SAIL NMR spectra, reliable, fully automated analyses of the NMR spectra and structure calculations are possible using fewer input spectra than with conventional uniformly {sup 13}C/{sup 15}N-labeled proteins. FLYA calculations with SAIL ubiquitin, using a single three-dimensional 'through-bond' spectrum (and 2D HSQC spectra) in addition to the {sup 13}C-edited and {sup 15}N-edited NOESY spectra for conformational restraints, yielded structures with an accuracy of 0.83-1.15 A for the backbone RMSD to the conventionally determined solution structure of SAIL ubiquitin. NMR structures can thus be determined almost exclusively from the NOESY spectra that yield the conformational restraints, without the need to record many spectra only for determining intermediate, auxiliary data of the chemical shift assignments. The FLYA calculations for this report resulted in 252 ubiquitin structure bundles, obtained with different input data but identical structure calculation and refinement methods. These structures cover the entire range from highly accurate structures to seriously, but not trivially, wrong structures, and thus constitute a valuable database for the substantiation of structure validation methods.

Automated NMR structure determination of stereo-array isotope labeled ubiquitin from minimal sets of spectra using the SAIL-FLYA system

International Nuclear Information System (INIS)

Ikeya, Teppei; Takeda, Mitsuhiro; Yoshida, Hitoshi; Terauchi, Tsutomu; Jee, Jun-Goo; Kainosho, Masatsune; Guentert, Peter

2009-01-01

Stereo-array isotope labeling (SAIL) has been combined with the fully automated NMR structure determination algorithm FLYA to determine the three-dimensional structure of the protein ubiquitin from different sets of input NMR spectra. SAIL provides a complete stereo- and regio-specific pattern of stable isotopes that results in sharper resonance lines and reduced signal overlap, without information loss. Here we show that as a result of the superior quality of the SAIL NMR spectra, reliable, fully automated analyses of the NMR spectra and structure calculations are possible using fewer input spectra than with conventional uniformly 13 C/ 15 N-labeled proteins. FLYA calculations with SAIL ubiquitin, using a single three-dimensional 'through-bond' spectrum (and 2D HSQC spectra) in addition to the 13 C-edited and 15 N-edited NOESY spectra for conformational restraints, yielded structures with an accuracy of 0.83-1.15 A for the backbone RMSD to the conventionally determined solution structure of SAIL ubiquitin. NMR structures can thus be determined almost exclusively from the NOESY spectra that yield the conformational restraints, without the need to record many spectra only for determining intermediate, auxiliary data of the chemical shift assignments. The FLYA calculations for this report resulted in 252 ubiquitin structure bundles, obtained with different input data but identical structure calculation and refinement methods. These structures cover the entire range from highly accurate structures to seriously, but not trivially, wrong structures, and thus constitute a valuable database for the substantiation of structure validation methods

Automated NMR structure determination of stereo-array isotope labeled ubiquitin from minimal sets of spectra using the SAIL-FLYA system.

Science.gov (United States)

Ikeya, Teppei; Takeda, Mitsuhiro; Yoshida, Hitoshi; Terauchi, Tsutomu; Jee, Jun-Goo; Kainosho, Masatsune; Güntert, Peter

2009-08-01

Stereo-array isotope labeling (SAIL) has been combined with the fully automated NMR structure determination algorithm FLYA to determine the three-dimensional structure of the protein ubiquitin from different sets of input NMR spectra. SAIL provides a complete stereo- and regio-specific pattern of stable isotopes that results in sharper resonance lines and reduced signal overlap, without information loss. Here we show that as a result of the superior quality of the SAIL NMR spectra, reliable, fully automated analyses of the NMR spectra and structure calculations are possible using fewer input spectra than with conventional uniformly 13C/15N-labeled proteins. FLYA calculations with SAIL ubiquitin, using a single three-dimensional "through-bond" spectrum (and 2D HSQC spectra) in addition to the 13C-edited and 15N-edited NOESY spectra for conformational restraints, yielded structures with an accuracy of 0.83-1.15 A for the backbone RMSD to the conventionally determined solution structure of SAIL ubiquitin. NMR structures can thus be determined almost exclusively from the NOESY spectra that yield the conformational restraints, without the need to record many spectra only for determining intermediate, auxiliary data of the chemical shift assignments. The FLYA calculations for this report resulted in 252 ubiquitin structure bundles, obtained with different input data but identical structure calculation and refinement methods. These structures cover the entire range from highly accurate structures to seriously, but not trivially, wrong structures, and thus constitute a valuable database for the substantiation of structure validation methods.

27 CFR 555.210 - Construction of type 4 magazines.

Science.gov (United States)

2010-04-01

... magazines. 555.210 Section 555.210 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO... Construction of type 4 magazines. A type 4 magazine is a building, igloo or “Army-type structure”, tunnel, dugout, box, trailer, or a semitrailer or other mobile magazine. (a) Outdoor magazines—(1) General...

Comparison of two mathematical models of the kite for Laddermill sail simulation

NARCIS (Netherlands)

Podgaets, A.R.; Ockels, W.J.

2007-01-01

Laddermill sail is an innovative approach to propel the ship with the power generated by kites. The first Laddermill system is currently being designed however existing mathematical models of the system produce different optimal recommendations. Thus a decision has been made to step back and to take

Sail training: an innovative approach to graduate nurse preceptor development.

Science.gov (United States)

Nicol, Pam; Young, Melisa

2007-01-01

A 1-day sail-training program that aims to increase graduate nurse preceptor skills was evaluated. Preliminary results suggest that this experiential learning is an effective way to develop graduate nurse preceptors. Awareness of graduate nurses' needs has been heightened, and skills in clinical teaching have been developed. It is indicated from the limited results that the outcomes are sustained over time, but further evaluation is needed.

Model of Optimal Cargo Transport Structure by Full Container Ship on Predefined Sailing Route

Directory of Open Access Journals (Sweden)

Serđo Kos

2004-01-01

Full Text Available This paper presents the mathematical model for solving theproblem of defining optimal cargo transport structure, occurringwhen, on a predefined sailing route, adequate number ofcontainers of various types, masses and sizes, possibly includingRO!RO cargo, is to be selected, i.e., a "container lot" is to beestablished in loading ports with the aim of gaining maximumship profit and, at the same time, of exploiting useful load andtransport capacity of container ship as much as possible. Theimplementation of the proposed model enables considerableincrease in the efficiency of container ship operations. Themodel was tested using a numerical example with real data.The applied post-optimal analysis examines the influence ofchange in some values of the mathematical model on the resultingoptimal program.

Angular velocity determination of spinning solar sails using only a sun sensor

Directory of Open Access Journals (Sweden)

Kun Zhai

2017-02-01

Full Text Available The direction of the sun is the easiest and most reliable observation vector for a solar sail running in deep space exploration. This paper presents a new method using only raw measurements of the sun direction vector to estimate angular velocity for a spinning solar sail. In cases with a constant spin angular velocity, the estimation equation is formed based on the kinematic model for the apparent motion of the sun direction vector; the least-squares solution is then easily calculated. A performance criterion is defined and used to analyze estimation accuracy. In cases with a variable spin angular velocity, the estimation equation is developed based on the kinematic model for the apparent motion of the sun direction vector and the attitude dynamics equation. Simulation results show that the proposed method can quickly yield high-precision angular velocity estimates that are insensitive to certain measurement noises and modeling errors.

27 CFR 555.211 - Construction of type 5 magazines.

Science.gov (United States)

2010-04-01

... magazines. 555.211 Section 555.211 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO... Construction of type 5 magazines. A type 5 magazine is a building, igloo or “Army-type structure”, tunnel, dugout, bin, box, trailer, or a semitrailer or other mobile facility. (a) Outdoor magazines—(1) General...

Novel Solar Sail Mission Concepts for High-Latitude Earth and Lunar Observation

NARCIS (Netherlands)

Heiligers, M.J.; Parker, Jeffrey S.; Macdonald, Malcolm

2016-01-01

This paper proposes the use of solar sail periodic orbits in the Earth-Moon system for ob-servation of the high-latitudes of the Earth and Moon. At the Earth, the high-latitudes will be crucial in answering questions concerning global climate change, monitoring space weather events and ensuring

On two speed optimization problems for ships that sail in and out of emission control areas

DEFF Research Database (Denmark)

Fagerholt, Kjetil; Psaraftis, Harilaos N.

2015-01-01

This paper deals with two speed optimization problems for ships that sail in and out of Emission Control Areas (ECAs) with strict limits on sulfur emissions. For ships crossing in and out of ECAs, such as deep-sea vessels, one of the common options for complying with these limits is to burn heavy...... fuel oil (HFO) outside the ECA and switch to low-sulfur fuel such as marine gas oil (MGO) inside the ECA. As the prices of these two fuels are generally very different, so may be the speeds that the ship will sail at outside and inside the ECA. The first optimization problem examined by the paper...

Functional or constructive attitudes: Which type drives consumers' evaluation of meat products?

Science.gov (United States)

Hamlin, Robert

2016-07-01

Consumer attitudes towards meat can be divided up into two types: Functional attitudes which are stable and exist over long periods of time, and constructive attitudes which are ephemeral and usually constructed at the point of sale. This research investigated the temporal and situational stability of meat consumers' attitudes by using the same established functional, multidimensional attitude instrument to generate attitude profiles for the four meat types: chicken/beef/lamb/poultry both as an abstracted construct and as a cue on a range of meat and meat-based products. The results showed that strong attitude profile was generated by the meat types as abstracted constructs, but that this profile broke down completely when the food products carrying the same meat types were evaluated. This result indicates that consumer attitudes may not be temporally or situationally stable, which in turn suggests that consumers' evaluation and choice of meat products may be driven to a greater or lesser extent by constructive rather than functional attitudes. Copyright © 2016 Elsevier Ltd. All rights reserved.

27 CFR 555.208 - Construction of type 2 magazines.

Science.gov (United States)

2010-04-01

... magazines. 555.208 Section 555.208 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO... Construction of type 2 magazines. A type 2 magazine is a box, trailer, semitrailer, or other mobile facility. (a) Outdoor magazines—(1) General. Outdoor magazines are to be bullet-resistant, fire-resistant...

Photogrammetry and Videogrammetry Methods Development for Solar Sail Structures. Masters Thesis awarded by George Washington Univ.

Science.gov (United States)

Pappa, Richard S. (Technical Monitor); Black, Jonathan T.

2003-01-01

This report discusses the development and application of metrology methods called photogrammetry and videogrammetry that make accurate measurements from photographs. These methods have been adapted for the static and dynamic characterization of gossamer structures, as four specific solar sail applications demonstrate. The applications prove that high-resolution, full-field, non-contact static measurements of solar sails using dot projection photogrammetry are possible as well as full-field, non-contact, dynamic characterization using dot projection videogrammetry. The accuracy of the measurement of the resonant frequencies and operating deflection shapes that were extracted surpassed expectations. While other non-contact measurement methods exist, they are not full-field and require significantly more time to take data.

Friction stir welding sets sail in China

International Nuclear Information System (INIS)

Luan, Guohong

2007-01-01

Today, Friction Stir Welding has set sail in China. As the pioneer of FSW development in the China territory, China FSW Centre hes made outstanding achievements in FSW technique development, FSW engineering, FSW equipment and FSW product. But the real industrial applications of FSW in China are just begining. With the planned national long-term development programmes and huge market requirement in aerospace, aviation, shipbuilding, railway, power and energy industries, FSW will continue to develop rapidly in the next 10 years. FSW will continue to develop rapidly in the next 10 years. FSW not only raises the level of joining techniques in Chinese industrial companies, but also increase the competitive ability of the industrial products made in china

Optimized Trajectories to the Nearest Stars Using Lightweight High-velocity Photon Sails

Science.gov (United States)

Heller, René; Hippke, Michael; Kervella, Pierre

2017-09-01

New means of interstellar travel are now being considered by various research teams, assuming lightweight spaceships to be accelerated via either laser or solar radiation to a significant fraction of the speed of light (c). We recently showed that gravitational assists can be combined with the stellar photon pressure to decelerate an incoming lightsail from Earth and fling it around a star or bring it to rest. Here, we demonstrate that photogravitational assists are more effective when the star is used as a bumper (I.e., the sail passes “in front of” the star) rather than as a catapult (I.e., the sail passes “behind” or “around” the star). This increases the maximum deceleration at α Cen A and B and reduces the travel time of a nominal graphene-class sail (mass-to-surface ratio 8.6× {10}-4 {{g}} {{{m}}}-2) from 95 to 75 years. The maximum possible velocity reduction upon arrival depends on the required deflection angle from α Cen A to B and therefore on the binary’s orbital phase. Here, we calculate the variation of the minimum travel times from Earth into a bound orbit around Proxima for the next 300 years and then extend our calculations to roughly 22,000 stars within about 300 lt-yr. Although α Cen is the most nearby star system, we find that Sirius A offers the shortest possible travel times into a bound orbit: 69 years assuming 12.5% c can be obtained at departure from the solar system. Sirius A thus offers the opportunity of flyby exploration plus deceleration into a bound orbit of the companion white dwarf after relatively short times of interstellar travel.

Climate Odyssey: Resources for Understanding Coastal Change through Art, Science, and Sail

Science.gov (United States)

Klos, P. Z.; Holtsnider, L.

2017-12-01

Climate Odyssey (climateodyssey.org) is a year-long sailing expedition and continuing collaboration aimed at using overlaps in science and visual art to communicate coastal climate change impacts and solutions. We, visual artist Lucy Holtsnider and climate scientist Zion Klos, are using our complimentary skills in art, science and communication to engage audiences both intuitively and cognitively regarding the urgency of climate change through story and visualization. Over the 2015 - 2016 academic year, we embarked on the sailing portion of Climate Odyssey, beginning in Lake Michigan, continuing along the Eastern Seaboard, and concluding in the tropics. Along the way we photographed climate change impacts and adaptation strategies, interviewed stakeholders, scientists, and artists. We are now sharing our photographs and documented encounters through a tangible artist's book, interactive digital map, blog, and series of K16 lesson plans. Each of our images added to the artist's book and digital map are linked to relevant blog entries and other external scientific resources, making the map both a piece of art and an engaging education tool for sharing the science of climate change impacts and solutions. After completing the sailing component of the project, we have now finalized our multi-media resources and are working to share these with the public via libraries, galleries, and K16 classrooms in coastal communities. At AGU, we will share with our peers the completed version of the series of K16 lesson plans that provide educators an easy-to-use way to introduce and utilize the material in the artist's book, digital map, and online blog. Through this, we hope to both discuss climate-focused education and engagement strategies, as well as showcase this example of art-science outreach with the broader science education and communication community that is focused on climate literacy in the U.S. and beyond.

In-Space Propulsion (ISP) Solar Sail Propulsion Technology Development

Science.gov (United States)

Montgomery, Edward E., IV

2004-01-01

An overview of the rationale and content for Solar Sail Propulsion (SSP), the on-going project to advance solar technology from technology readiness level 3 to 6 will be provided. A descriptive summary of the major and minor component efforts underway will include identification of the technology providers and a listing of anticipated products Recent important results from major system ground demonstrators will be provided. Finally, a current status of all activities will provided along with the most recent roadmap for the SSP technology development program.

First-line bevacizumab-based therapy in advanced non-squamous non-small-cell lung cancer : analysis of the Italian patients enrolled in the SAiL study.

Science.gov (United States)

Bearz, Alessandra; Passalacqua, Rodolfo; Alabiso, Oscar; Cinieri, Saverio; Gridelli, Cesare; Cravesana, Claudia; Crinò, Lucio

2012-11-01

First-line bevacizumab-based therapy has been shown to improve outcomes in patients with advanced non-squamous non-small-cell lung cancer (NSCLC). The recent international phase IV SAiL study (a Study of Avastin [bevacizumab] in combination with platinum-containing chemotherapy in patients with advanced or recurrent non-squamous cell Lung cancer) evaluated the safety and efficacy of bevacizumab combined with standard chemotherapy regimens in routine clinical practice. Here we report the results of a subanalysis of baseline characteristics and efficacy data for Italian patients enrolled in SAiL. In the SAiL study, patients with untreated locally advanced, metastatic or recurrent non-squamous NSCLC received bevacizumab (7.5 or 15 mg/kg) every 3 weeks plus chemotherapy for up to six cycles, followed by single-agent bevacizumab until disease progression. Efficacy was assessed in terms of time to disease progression (TTP) and overall survival (OS). The Italian intent-to-treat population comprised 215 patients from a SAiL population of 2212 patients. At baseline, Italian patients tended to have less advanced disease than the overall population. Thus, the proportion of patients at enrollment with tumour stage IIIb and IV was 23.7 and 76.3 %, respectively, for the Italian population versus 19.7 and 80.3 % for the whole SAiL population. In addition, a higher proportion of Italian patients had an Eastern Cooperative Oncology Group performance status of 0 (72.6 vs. 37.2 %) and the prevalence of co-morbid conditions was lower in Italian patients (59.5 % of Italian patients reported a co-morbid condition and 60.0 % were receiving non-oncological treatment compared with 73.3 and 73.4 %, respectively, of SAiL patients overall). The mean exposures to bevacizumab and to chemotherapy were comparable between the Italian patient group and overall patient population, although cisplatin doublets were more commonly employed in Italian patients whereas carboplatin doublets were more

Effects of a Tall Ship Sail Training Experience on Adolescents' Self-Concept

Science.gov (United States)

Capurso, Michele; Borsci, Simone

2013-01-01

This study investigates the impact of a sail training education programme on the self-concept of a group of 147 adolescents. The Competence and Social domains of Bracken's self-concept scale were assessed by a quasi-experimental design in three phases: before commencement of the activities, on the last day of the voyage, and three months after…

Treatment choices for the glycaemic management of patients with type 2 diabetes and chronic kidney disease: Analysis of the SAIL patient linked dataset.

Science.gov (United States)

Min, Thinzar; Davies, Gareth I; Rice, Sam; Chess, James; Stephens, Jeffrey W

Chronic kidney disease (CKD) is common in type 2 diabetes and limits the treatment choices for glycaemic control. Our aim was to examine real-world prescribing for managing hyperglycaemia in the presence of CKD. The SAIL (Secure Anonymised Information Linkage) databank was used to examine prescribing during the period from the 1st of January to 30th December 2014. CKD was defined as:- none or mild CKD, eGFR ≥60mL/min/1.73m 2 ; moderate CKD eGFR <60mL/min/1.73m 2 ; and severe CKD eGFR <30mL/min/1.73m 2 or requiring dialysis. We identified 9585 subjects who received any form of glucose lowering therapy (8363 had no/mild CKD; 1137 moderate CKD; 85 severe CKD). There was a linear association between insulin use and CKD severity with approximately 54% of those with severe CKD receiving insulin. Sulphonylureas use did not differ among the CKD groups and was approximately 40%. Metformin showed a linear decrease across the groups, however approximately 21% in the severe CKD group received metformin. The use of dipeptidyl peptidase 4 inhibitors (DPP-4i) was approximately 20% and did not differ among groups. The DPP-4 inhibitor choice was:- 1% vildagliptin, 9% saxagliptin, 58% sitagliptin, and 32% linaglitpin. With respect to sitagliptin and saxagliptin, 72% and 62% received an inappropriately high dose in the setting of CKD. We observed that a considerable proportion of patients with type 2 diabetes and CKD were receiving metformin and non dose-adjusted DPP-4 inhibitors. Careful consideration of medication use and dosaging is required in the setting of CKD and type 2 diabetes. Copyright © 2017 Diabetes India. Published by Elsevier Ltd. All rights reserved.

A Proposal Of Simulation Model Of A Wind-Steering System For Sailing Yachts, Based On Single-Stage Servo-Pendulum Coupled With Main Rudder

Directory of Open Access Journals (Sweden)

Piętak Andrzej

2015-04-01

Full Text Available The aim of this study was to investigate possible application of fast design prototyping methods for wind-steering systems used in offshore sailing yachts. The development of such methods would help to speed up the construction work and reduce the scope of necessary experimental research, prior to implementation of the system. In the present work, based on an analysis of existing designs of windvane systems, a preliminary selection of the system configuration has been undertaken, in terms of a compromise between efficiency, performance, and design complexity. Construction design of a single-stage, servo – pendulum system, has been developed by using the Autodesk Inventor design package. Next, based on the design data, a simulation model of the system, has been produced by using Matlab - Simulink software and SimMechanics library. The model was further verified in terms of kinematics mapping with the use of Matlab visualization tools.

Data approximation using a blending type spline construction

International Nuclear Information System (INIS)

Dalmo, Rune; Bratlie, Jostein

2014-01-01

Generalized expo-rational B-splines (GERBS) is a blending type spline construction where local functions at each knot are blended together by C k -smooth basis functions. One way of approximating discrete regular data using GERBS is by partitioning the data set into subsets and fit a local function to each subset. Partitioning and fitting strategies can be devised such that important or interesting data points are interpolated in order to preserve certain features. We present a method for fitting discrete data using a tensor product GERBS construction. The method is based on detection of feature points using differential geometry. Derivatives, which are necessary for feature point detection and used to construct local surface patches, are approximated from the discrete data using finite differences

33 CFR 173.57 - Contents of report.

Science.gov (United States)

2010-07-01

... contributed to causing the casualty. (w) The make, model, type (open, cabin, house, or other), beam width at... outdrive, sail, or other), fuel (gas, diesel, or other), construction (wood, steel, aluminum, plastic...

A control strategy for steering an autonomous surface sailing vehicle in a tacking maneuver

DEFF Research Database (Denmark)

Jouffroy, Jerome

2009-01-01

Sailing vessels such as sailboats but also landyachts are vehicles representing a real challenge for automation. However, the control aspects of such vehicles were hitherto very little studied. This paper presents a simplied dynamic model of a so-called landyacht allowing to capture the main...

Variable type framing in Spanish constructions of directed motion

DEFF Research Database (Denmark)

Pedersen, Johan

2014-01-01

demonstrate in this article that this construction type tends to be acceptable whenever the lexical meaning of the verb implies an element of directed motion. Drawing on Goldberg (2006) and Pedersen (2009, 2013), I suggest that schematicity is a typological parameter, and, more specifically, that the term...... variable type framing may accommodate the case of variation under scrutiny here....

Deep Play. Rationality in the Life World with Special Reference to Sailing

Science.gov (United States)

Goold, Patrick

2014-01-01

In an essay on the rationality of play, the author characterizes rationality by the three distinct demands it makes on the individual--demands for autonomy, solidarity, and integrity. He develops each of these as they apply to the sport of sailing, using the example of two deep-ocean expeditions to arrive at a concept of deep play he sees as one…

Thrust evaluation of magneto plasma sail that obtains an electromagnetic thrust from the solar wind

International Nuclear Information System (INIS)

Kajimura, Yoshihiro; Funaki, Ikkoh; Usui, Hideyuki; Yamakawa, Hiroshi

2011-01-01

Magneto Plasma Sail (MPS) is a propulsion system used in space, which generates its force by the interaction between the solar wind and an inflated magnetic field via a plasma injection. The quantitative evaluation of the thrust increment generated by injecting a plasma jet with a β in less than unity was conducted by three-dimensional hybrid particle-in-cell (PIC) simulations in an ion inertia scale. The injected plasma β in is 0.02 and the ratio of Larmor radius of injected ion to the representative length of the magnetic field is 0.5 at the injection point. In this situation, the obtained thrust of the MPS is 1.6 mN compared with the 0.2 mN of the thrust obtained by the pure magnetic sail since the induced current region on magnetosphere expanded by the magnetic inflation. (author)

Canopy bidirectional reflectance calculation based on Adding method and SAIL formalism: AddingS / AddingSD

NARCIS (Netherlands)

Kallel, A.; Verhoef, W.; Hegarat-Mascle, Le S.; Ottle, C.; Hubert-Moy, L.

2008-01-01

The SAIL model (proposed by Verhoef) is largely used in the remote sensing community to calculate the canopy Bidirectional Reflectance Distribution Function. The simulation results appear acceptable compared to observations especially for not very dense planophile vegetation. However, for

Simultaneous Optimization of Container Ship Sailing Speed and Container Routing with Transit Time Restrictions

DEFF Research Database (Denmark)

Karsten, Christian Vad; Røpke, Stefan; Pisinger, David

We introduce a decision support tool for liner shipping companies to optimally determine the sailing speed and needed fleet for a global network. As a novelty we incorporate cargo routing decisions with tight transit time restrictions on each container such that we get a realistic picture...

Accurate approximation of in-ecliptic trajectories for E-sail with constant pitch angle

Science.gov (United States)

Huo, Mingying; Mengali, Giovanni; Quarta, Alessandro A.

2018-05-01

Propellantless continuous-thrust propulsion systems, such as electric solar wind sails, may be successfully used for new space missions, especially those requiring high-energy orbit transfers. When the mass-to-thrust ratio is sufficiently large, the spacecraft trajectory is characterized by long flight times with a number of revolutions around the Sun. The corresponding mission analysis, especially when addressed within an optimal context, requires a significant amount of simulation effort. Analytical trajectories are therefore useful aids in a preliminary phase of mission design, even though exact solution are very difficult to obtain. The aim of this paper is to present an accurate, analytical, approximation of the spacecraft trajectory generated by an electric solar wind sail with a constant pitch angle, using the latest mathematical model of the thrust vector. Assuming a heliocentric circular parking orbit and a two-dimensional scenario, the simulation results show that the proposed equations are able to accurately describe the actual spacecraft trajectory for a long time interval when the propulsive acceleration magnitude is sufficiently small.

Low-cost gossamer systems for solar sailing and spacecraft deorbiting applications.

OpenAIRE

Fernandez, Juan M.

2015-01-01

Nowadays, a technology demonstrator platform popular amongst the research community given their relatively low cost and short development time are cubesats. Nevertheless, cubesats are by definition nano-satellites of small volume and mass, and therefore, they traditionally only allowed very limited sizes of any expandable structure onboard with final deployed areas in the order of a few square meters. This conflicts with the large areas required for efficient solar sails, making the demonstra...

The Heliopause Electrostatic Rapid Transit System (HERTS) Design, Trades, and Analyses Performed in a Two Year NASA Investigation of Electric Sail Propulsion Systems

Science.gov (United States)

Wiegmann, Bruce M.

2017-01-01

The Heliopause Electrostatic Rapid Transit System (HERTS) was one of the seven total Phase II NASA Innovative Advanced Concepts (NIAC) that was down-selected in 2015 for continued funding and research. In Phase I our team learned that a spacecraft propelled by an Electric Sail (E-Sail) can travel great astronomical distances, such as to the Heliopause region of the solar system (approx. 100 to 120 AU) in approximately one quarter of the time (10 years) versus the time it took the Voyager spacecraft launched in 1977 (36 years). The completed work within the Phase II NIAC funded effort builds upon the work that was done in the Phase I NIAC and is focused on: 1) Testing of plasma interaction with a charged wire in a MSFC simulated solar environment vacuum test chamber. 2) Development of a Particle-in-Cell (PIC) models that are validated in the plasma testing and used to extrapolate to the E-Sail propulsion system design. 3) Conceptual design of a Technology Demonstration Mission (TDM) spacecraft developed to showcase E-Sail propulsion systems. 4) Down selection of both: a) Materials for a multi km length conductor and, b) Best configuration of the proposed conductor deployment subsystem. This paper will document the findings to date (June, 2017) of the above focused areas.

Conceptual Design of an Electric Sail Technology Demonstration Mission Spacecraft

Science.gov (United States)

Wiegmann, Bruce M.

2017-01-01

There is great interest in examining the outer planets of our solar system and Heliopause region (edge of Solar System) and beyond regions of interstellar space by both the Planetary and Heliophysics communities. These needs are well docu-mented in the recent National Academy of Sciences Decadal Surveys. There is significant interest in developing revolutionary propulsion techniques that will enable such Heliopause scientific missions to be completed within 10 to15 years of the launch date. One such enabling propulsion technique commonly known as Electric Sail (E-Sail) propulsion employs positively charged bare wire tethers that extend radially outward from a rotating spacecraft spinning at a rate of one revolution per hour. Around the positively charged bare-wire tethers, a Debye Sheath is created once positive voltage is applied. This sheath stands off of the bare wire tether at a sheath diameter that is proportional to the voltage in the wire coupled with the flux density of solar wind ions within the solar system (or the location of spacecraft in the solar system. The protons that are expended from the sun (solar wind) at 400 to 800 km/sec are electrostatically repelled away from these positively charged Debye sheaths and propulsive thrust is produced via the resulting momentum transfer. The amount of thrust produced is directly proportional to the total wire length. The Marshall Space Flight Center (MSFC) Electric Sail team is currently funded via a two year Phase II NASA Innovative Advanced Concepts (NIAC) awarded in July 2015. The team's current activities are: 1) Developing a Particle in Cell (PIC) numeric engineering model from the experimental data collected at MSFC's Solar Wind Facility on the interaction between simulated solar wind interaction with a charged bare wire that can be applied to a variety of missions, 2) The development of the necessary tether deployers and tethers to enable successful de-ployment of multiple, multi km length bare tethers

NASA's Electric Sail Propulsion System Investigations over the Past Three Years

Science.gov (United States)

Wiegmann, Bruce M.

2017-01-01

Personnel from NASA's MSFC have been investigating the feasibility of an advanced propulsion system known as the Electric Sail for future scientific missions of exploration. This team initially won a NASA Space Technology Mission Directorate (STMD) Phase I NASA Innovative Advanced Concept (NIAC) award and then a two year follow-on Phase II NIAC award. This paper documents the findings from this three year investigation. An Electric sail propulsion system is a propellant-less and extremely fast propulsion system that takes advantage of the ions that are present in the solar wind to provide very rapid transit speeds whether to deep space or to the inner solar system. Scientific spacecraft could arrive to Pluto in 5 years, to the boundary of the solar system in ten to twelve years vs. thirty five plus years it took the Voyager spacecraft. The team's recent focused activities are: 1) Developing a Particle in Cell (PIC) numeric engineering model from the experimental data collected at MSFC's Solar Wind Facility on the interaction between simulated solar wind interaction with a charged bare wire that can be applied to a variety of missions, 2) The development of the necessary tether deployers/tethers to enable successful deployment of multiple, multi km length bare tethers, 3) Determining the different missions that can be captured from this revolutionary propulsion system 4) Conceptual designs of spacecraft to reach various destinations whether to the edge of the solar system, or as Heliophysics sentinels around the sun, or to trips to examine a multitude of asteroids These above activities, once demonstrated analytically, will require a technology demonstration mission (2021 to 2023) to demonstrate that all systems work together seamlessly before a Heliophysics Electrostatic Rapid Transit System (HERTS) could be given the go-ahead. The proposed demonstration mission will require that a small spacecraft must first travel to cis-lunar space as the Electric Sail must be

Rethinking Use of the OML Model in Electric Sail Development

Science.gov (United States)

Stone, Nobie H.

2016-01-01

In 1924, Irvin Langmuir and H. M. Mott-Smith published a theoretical model for the complex plasma sheath phenomenon in which they identified some very special cases which greatly simplified the sheath and allowed a closed solution to the problem. The most widely used application is for an electrostatic, or "Langmuir," probe in laboratory plasma. Although the Langmuir probe is physically simple (a biased wire) the theory describing its functional behavior and its current-voltage characteristic is extremely complex and, accordingly, a number of assumptions and approximations are used in the LMS model. These simplifications, correspondingly, place limits on the model's range of application. Adapting the LMS model to real-life conditions is the subject of numerous papers and dissertations. The Orbit-Motion Limited (OML) model that is widely used today is one of these adaptions that is a convenient means of calculating sheath effects. Since the Langmuir probe is a simple biased wire immersed in plasma, it is particularly tempting to use the OML equation in calculating the characteristics of the long, highly biased wires of an Electric Sail in the solar wind plasma. However, in order to arrive at the OML equation, a number of additional simplifying assumptions and approximations (beyond those made by Langmuir-Mott-Smith) are necessary. The OML equation is a good approximation when all conditions are met, but it would appear that the Electric Sail problem lies outside of the limits of applicability.

The Response of Old Technology Incumbents to Technological Competition - Does the Sailing Ship Effect Exist?

DEFF Research Database (Denmark)

Howells, John

This article investigates whether firms react to a radical technological substitution threat by a deliberate acceleration of innovation in their existing technology - the 'sailing ship effect'. It has been argued that the effect is both significant and widespread and warrants a reexamination of our...

Optimization of the Costs and the Safety of Maritime Transport by Routing: The use of Currents Forecast in the Routing of Racing Sail Boats as a Prototype of Rout Optimization for Trading Ships

Science.gov (United States)

Theunynck, Denis; Peze, Thierry; Toumazou, Vincent; Zunquin, Gauthier; Cohen, Olivier; Monges, Arnaud

2005-03-01

It is interesting to see whether the model of routing designed for races and great Navy operations could be transferred to commercial navigation and if so, within which framework.Sail boat routing conquered its letters of nobility during great races like the « Route du Rhum » or the transatlantic race « Jacques Vabre ». It is the ultimate stage of the step begun by the Navy at the time of great operations, like D-day (Overlord )June 6, 1944, in Normandy1.Routing is, from the beginning, mainly based on statistical knowledge and weather forecast, but with the recent availability of reliable currents forecast, sail boats routers and/or skippers now have to learn how to use both winds and currents to obtain the best performance, that is to travel between two points in the shortest time possible in acceptable security conditions.Are the currents forecast only useful to racing sail boat ? Of course not, they are a great help to fisherman for whom the knowledge of currents is also the knowledge of sea temperature who indicates the probability of fish presence. They are also used in offshore work to predict the hardness of the sea during operation.A less developed field of application is the route optimization of trading ships. The idea is to optimize the use of currents to increase the relative speed of ships with no augmentation of fuel expense. This new field will require that currents forecasters learn about the specific needs of another type of clients. There is also a need of teaching because the future customers will have to learn how to use the information they will get.At this point, the introduction of the use of currents forecast in racing sail boats routing is only the first step. It is of great interest because it can rely on a high knowledge in routing.The main difference is of course that the wind direction and its force are of greater importance to a sail boat that they are for a trading ship for whom the point of interest will be the fuel consumption

Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology.

Science.gov (United States)

Xu, Tao; Zhao, Weixin; Zhu, Jian-Ming; Albanna, Mohammad Z; Yoo, James J; Atala, Anthony

2013-01-01

This study was designed to develop a versatile method for fabricating complex and heterogeneous three-dimensional (3D) tissue constructs using simultaneous ink-jetting of multiple cell types. Human amniotic fluid-derived stem cells (hAFSCs), canine smooth muscle cells (dSMCs), and bovine aortic endothelial cells (bECs), were separately mixed with ionic cross-linker calcium chloride (CaCl(2)), loaded into separate ink cartridges and printed using a modified thermal inkjet printer. The three cell types were delivered layer-by-layer to pre-determined locations in a sodium alginate-collagen composite located in a chamber under the printer. The reaction between CaCl(2) and sodium alginate resulted in a rapid formation of a solid composite gel and the printed cells were anchored in designated areas within the gel. The printing process was repeated for several cycles leading to a complex 3D multi-cell hybrid construct. The biological functions of the 3D printed constructs were evaluated in vitro and in vivo. Each of the printed cell types maintained their viability and normal proliferation rates, phenotypic expression, and physiological functions within the heterogeneous constructs. The bioprinted constructs were able to survive and mature into functional tissues with adequate vascularization in vivo. These findings demonstrate the feasibility of fabricating complex heterogeneous tissue constructs containing multiple cell types using inkjet printing technology. Copyright © 2012 Elsevier Ltd. All rights reserved.

Sailing to Komodo: Contradictions of Tourism and Development in Eastern Indonesia

Directory of Open Access Journals (Sweden)

Maribeth Erb

2015-12-01

Full Text Available Tourism is often pinpointed as a sector of growth for countries in the developing world, and this perspective has been readily accepted in Indonesia. Government officials in poorer sections of the country, such as Nusa Tenggara Timur province (NTT in eastern Indonesia, have high hopes for the role that tourism can play in developing these poorer regions. This is not surprising, given the increasing renown of the Komodo National Park, just west of the island of Flores, where the world famous Komodo dragons reside. However, how exactly tourism is supposed to raise the standard of living and aid in development in NTT province is often unclear. In this paper I want to critically look at ideas about tourism and development in NTT, by focusing on the ‘Sail Komodo’ yacht rally, a major tourism event that took place from August to September 2013. Sail Komodo was as a marine tourism event expected to boost tourist numbers, lift the standard of living of people in this province and lower poverty levels. I critically analyze this event within the context of a ‘mega event’, and show how the contradictory ideas about how the event was meant to lead to prosperity for the poor can indicate the sometimes misguided relationship posited between tourism and development.

Construction sustainability with adobe bricks type elements

Directory of Open Access Journals (Sweden)

Andreea Hegyi

2016-06-01

Full Text Available Sustainability is a criterion defined in the 80, which is essential in all fields of current activity. At the moment, it can not talk about development without being taken into account sustainability criteria. It presents the ensuring for an harmonious development, in line with current needs, without to endanger the possibility to develop and satisfy the needs of future generations. The buildings of adobe bricks-type elements ensure successfully the conditions imposed by this criterion. This type of construction ensures the responsible use of renewable natural resources, the possibility of reuse and recycling of materials, contributes to environmental protection and to pollution reduction, to energy saving and it provides a cleaner and healthier living environment. Not least, the buildings of this type are accessible in terms of cost and can contribute to the development of other fields such as eco-tourism.

Attitude and orbital dynamics modeling for an uncontrolled solar-sail experiment in low-Earth orbit

NARCIS (Netherlands)

Pirovano, L.; Seefeldt, P.; Dachwald, B.; Noomen, R.

2015-01-01

Gossamer-1 is the first project of the three-step Gossamer roadmap, the purpose of which is to develop, prove and demonstrate that solar-sail technology is a safe and reliable propulsion technique for long-lasting and high-energy missions. This paper firstly presents the structural analysis

PSYCHOLOGICAL PECULIARITIES OF TEACHING FUTURE NAVIGATORS READING ENGLISH AUTHENTIC SAILING DIRECTIONS

Directory of Open Access Journals (Sweden)

Наталія Приміна

2014-07-01

Full Text Available In the given article the psychological peculiarities of teaching future navigators reading English professional authentic documentation have been analyzed. The psychological foundations of understanding printed information in general and foreign information particularly have been disclosed. The processes of textual information perception and visual material perception comprehension have been analysed. The language levels of foreign text comprehension have been examined. The peculiarities of perceptual transformation of foreign language information while reading English sailing directions have been found out.

The SAIL databank: linking multiple health and social care datasets.

Science.gov (United States)

Lyons, Ronan A; Jones, Kerina H; John, Gareth; Brooks, Caroline J; Verplancke, Jean-Philippe; Ford, David V; Brown, Ginevra; Leake, Ken

2009-01-16

Vast amounts of data are collected about patients and service users in the course of health and social care service delivery. Electronic data systems for patient records have the potential to revolutionise service delivery and research. But in order to achieve this, it is essential that the ability to link the data at the individual record level be retained whilst adhering to the principles of information governance. The SAIL (Secure Anonymised Information Linkage) databank has been established using disparate datasets, and over 500 million records from multiple health and social care service providers have been loaded to date, with further growth in progress. Having established the infrastructure of the databank, the aim of this work was to develop and implement an accurate matching process to enable the assignment of a unique Anonymous Linking Field (ALF) to person-based records to make the databank ready for record-linkage research studies. An SQL-based matching algorithm (MACRAL, Matching Algorithm for Consistent Results in Anonymised Linkage) was developed for this purpose. Firstly the suitability of using a valid NHS number as the basis of a unique identifier was assessed using MACRAL. Secondly, MACRAL was applied in turn to match primary care, secondary care and social services datasets to the NHS Administrative Register (NHSAR), to assess the efficacy of this process, and the optimum matching technique. The validation of using the NHS number yielded specificity values > 99.8% and sensitivity values > 94.6% using probabilistic record linkage (PRL) at the 50% threshold, and error rates were SAIL databank represents a research-ready platform for record-linkage studies.

Simulation study of solar wind push on a charged wire: basis of solar wind electric sail propulsion

Directory of Open Access Journals (Sweden)

P. Janhunen

2007-03-01

Full Text Available One possibility for propellantless propulsion in space is to use the momentum flux of the solar wind. A way to set up a solar wind sail is to have a set of thin long wires which are kept at high positive potential by an onboard electron gun so that the wires repel and deflect incident solar wind protons. The efficiency of this so-called electric sail depends on how large force a given solar wind exerts on a wire segment and how large electron current the wire segment draws from the solar wind plasma when kept at a given potential. We use 1-D and 2-D electrostatic plasma simulations to calculate the force and present a semitheoretical formula which captures the simulation results. We find that under average solar wind conditions at 1 AU the force per unit length is (5±1×10−8 N/m for 15 kV potential and that the electron current is accurately given by the well-known orbital motion limited (OML theory cylindrical Langmuir probe formula. Although the force may appear small, an analysis shows that because of the very low weight of a thin wire per unit length, quite high final speeds (over 50 km/s could be achieved by an electric sailing spacecraft using today's flight-proved components. It is possible that artificial electron heating of the plasma in the interaction region could increase the propulsive effect even further.

Simulations of momentum transfer process between solar wind plasma and bias voltage tethers of electric sail thruster

Science.gov (United States)

Xia, Guangqing; Han, Yajie; Chen, Liuwei; Wei, Yanming; Yu, Yang; Chen, Maolin

2018-06-01

The interaction between the solar wind plasma and the bias voltage of long tethers is the basic mechanism of the electric sail thruster. The momentum transfer process between the solar wind plasma and electric tethers was investigated using a 2D full particle PIC method. The coupled electric field distribution and deflected ion trajectory under different bias voltages were compared, and the influence of bias voltage on momentum transfer process was analyzed. The results show that the high potential of the bias voltage of long tethers will slow down, stagnate, reflect and deflect a large number of ions, so that ion cavities are formed in the vicinity of the tether, and the ions will transmit the axial momentum to the sail tethers to produce the thrust. Compared to the singe tether, double tethers show a better thrust performance.

Evaluation of the potential to upgrade the Sandia Atomic Iodine Laser SAIL-1 to higher output energies

International Nuclear Information System (INIS)

Riley, M.E.; Palmer, R.E.

1977-05-01

The predicted output energy of the Sandia Atomic Iodine Laser SAIL-1 is given for various numbers of preamplifier stages and for various small signal gains in each stage. Additional possibilities for further increasing the output energy are given

Further development and performance evaluation of the autonomous sailing boat Maribot Vane

OpenAIRE

Dhomé, Ulysse

2018-01-01

This paper describes the ongoing development of Maribot Vane, an autonomous sailing vessel at the Maritime Robotics Laboratory of KTH, the Royal Institute of Technology, Stockholm. There is an ac-celerating need for ocean sensing where autonomous vehicles can play a key role in assisting scientists with environmental monitoring and collecting oceanographic data. The purpose of Maribot Vane is to offer a sus-tainable alternative for these autonomous missions by using wind and an energy efficie...

Validating the Type D personality construct in Chinese patients with coronary heart disease.

Science.gov (United States)

Yu, Doris S F; Thompson, David R; Yu, Cheuk Man; Pedersen, Susanne S; Denollet, Johan

2010-08-01

Type D personality predicts poor prognosis in coronary heart disease (CHD) but little is known about Type D in non-Western cultures. We examined the (a) validity of the Type D construct and its assessment with the DS14 scale in the Chinese culture, (b) prevalence of Type D, and (c) gender vs. Type D discrepancies in depression/anxiety, among Chinese patients with CHD. Patients with CHD (N=326) completed the Chinese version of the DS14. The NEO Five Factor Inventory (NEO-FFI), Hospital Anxiety and Depression Scale (HADS), and Stress Symptom Checklist (SSC) were administered to subsamples to establish construct and discriminant validity. Administration of the DS14, HADS, and SSC was repeated at 1 month after hospital discharge in 66 patients, and stability of the DS14 was examined in another subsample of 100 patients. The theoretical structure of the Type D construct in the Chinese culture was supported (chi(2)/df=2.89, root mean square error of approximation=0.08, normal fit index=0.91, non-normal fit index=0.91, comparative fit index=0.93). The Negative Affectivity (NA) and Social Inhibition (SI) subscales of the DS14 in the entire sample were internally consistent (Cronbach's alpha=0.89/0.81), measured stable traits (3-month test-retest ICC=0.76/0.74), and correlated significantly with the neuroticism (NA/neuroticism, r=0.78, Ppersonality was 31%. Type D was not related to transient emotional states. However, Chinese patients with a Type D personality were at increased concurrent risk of anxiety (P=.002) and depression (P=.016). Type D personality is a cross-culturally valid construct, is associated with an increased risk of anxiety and depression, and deserves prompt attention in estimating the prognostic risk of Chinese CHD patients. Copyright 2010 Elsevier Inc. All rights reserved.

Types of conflict, types of relationships and preferred conflict resolution strategies: Implications for constructive conflict resolution programmes

Directory of Open Access Journals (Sweden)

Petrović Danijela S.

2012-01-01

Full Text Available Constructive conflict resolution programmes are based on the idea that children and youth do no have sufficient knowledge of the procedures and skills for conflict resolution, which is why the conflicts they take part in soon become destructive. Notwithstanding the indubitable practical significance of the constructive conflict resolution programmes, it can be objected that they are not sufficiently based on empirical findings about the characteristics of conflicts in childhood and adolescence. Hence, this paper explores different types of conflict with peers and friends with the aim of determining the preferred conflict resolution strategies and using the obtained results to consider the implications for the improvement of constructive conflict resolution programmes. The research was conducted on the sample of 286 adolescents. The method of hypothetical conflict situations was used for studying the preferred conflict resolution strategies. The key results, which should be taken into account when developing constructive conflict resolution programmes, indicate that the preference for a conflict resolution strategy varies depending on conflict type (problem solving is mostly used in conflicts occurring due to opinion differences and disrespect of agreement, unlike the conflicts arising due to provocations, stubbornness and dishonesty and relationship types (in conflicts with friends, adolescents prefer problem solving, while in peer conflicts they more frequently opt for competition. [Projekat Ministarstva nauke Republike Srbije, br. 179018: Identifikacija, merenje i razvoj kognitivnih i emocionalnih kompetencija važnih društvu orijentisanom na evropske integracije

Finite-volume simulation of the flow around a sailing boat with unsteady motion; Hiteijo undo wo okonau hansotei no yuten taisekiho ni yoru simulation

Energy Technology Data Exchange (ETDEWEB)

Akimoto, H. [Tottori University, Tottori (Japan). Faculty of Engineering

1997-06-01

A new simulation code WISDAM-7 is developed to simulate performance of a sailing boat moving three-dimensionally on a free surface. It adequately predicts forces acting on each element, such as hull, sail, keel and rudder, and use them as the inputs to solve equations of hull motion of 6 freedoms. Its major features are the grid system fit for both free and hull surfaces, generation of discrete space by the finite-volume method, handling of the velocity vectors directly as those in the Descartes system, velocity and pressure placed at the cell center, use of the moving grid system for free and object surfaces, and use of equations of hull motion of 6 freedoms. It is confirmed by comparing simulated motion of an IACC class yacht with the observed surface pressure distributions in the test tank that the new method satisfies the basic requirements for simulation of sailing boat motion and expands the applicable range of CFD to general motion conditions. 8 refs., 18 figs.

The validity of the Type D construct and its assessment in Taiwan.

Science.gov (United States)

Weng, Chia-Ying; Denollet, Johan; Lin, Chin-Lon; Lin, Tin-Kwang; Wang, Wen-Chung; Lin, Jyun-Ji; Wong, Shu-Shu; Mols, Floortje

2013-02-04

Type D (distressed) personality, defined by negative affectivity and social inhibition, is related to cardiovascular outcomes. Little is known about Type D in non-Western cultures. We examined the validity of this construct and its assessment in Taiwanese patients with coronary artery disease (CAD) and adults from the general population. CAD patients (N = 87) and adults from the general population (N = 421) completed the 14-item Type D Scale- Taiwanese version (DS14-T), State-Trait Anxiety Inventory, Beck Depression Inventory-II, and Chinese Hostility Inventory Short-Form. Based on the psychometric examination, item #3 of the original DS14, "I often talk to strangers" was replaced by "I don't like to have a lot of people around me" which comes from the "Withdrawal" facet of social inhibition of DS-24. The reliability of Type D assessment in Taiwan was good, with Cronbach's α for negative affectivity and social inhibition of .86 and .79. Factor analyses confirmed the two-factor model of the Type D construct. The prevalence rate of Type D personality in Taiwan was 20% in CAD patients and 16% in the general population. Negative affectivity was positively associated with anxiety, depression and hostility, and social inhibition was positively associated with suppressive hostility and negatively associated with expressive hostility after controlling for the total hostility. Furthermore, Taiwanese individuals with a Type D personality displayed elevated levels of anxiety, depression and hostility. The Type D construct and its assessment with the DS14-T is generalizable to an Asian setting, Taiwan. The DS14-T showed good psychometric properties, and the prevalence of Type D personality in Taiwan was similar to the prevalence rates in Western countries and Mainland China, and Type D was associated with anxiety, depression and hostility.

Upper limb stroke rehabilitation: the effectiveness of Stimulation Assistance through Iterative Learning (SAIL).

Science.gov (United States)

Meadmore, Katie L; Cai, Zhonglun; Tong, Daisy; Hughes, Ann-Marie; Freeman, Chris T; Rogers, Eric; Burridge, Jane H

2011-01-01

A novel system has been developed which combines robotic therapy with electrical stimulation (ES) for upper limb stroke rehabilitation. This technology, termed SAIL: Stimulation Assistance through Iterative Learning, employs advanced model-based iterative learning control (ILC) algorithms to precisely assist participant's completion of 3D tracking tasks with their impaired arm. Data is reported from a preliminary study with unimpaired participants, and also from a single hemiparetic stroke participant with reduced upper limb function who has used the system in a clinical trial. All participants completed tasks which involved moving their (impaired) arm to follow an image of a slowing moving sphere along a trajectory. The participants' arm was supported by a robot and ES was applied to the triceps brachii and anterior deltoid muscles. During each task, the same tracking trajectory was repeated 6 times and ILC was used to compute the stimulation signals to be applied on the next iteration. Unimpaired participants took part in a single, one hour training session and the stroke participant undertook 18, 1 hour treatment sessions composed of tracking tasks varying in length, orientation and speed. The results reported describe changes in tracking ability and demonstrate feasibility of the SAIL system for upper limb rehabilitation. © 2011 IEEE

Reconstruction of internal nasal valve, septum, dorsum, and anterior structures of the nose in a single procedure with a molded bone graft: the sail graft.

Science.gov (United States)

Guneren, Ethem; Ciftci, Mehmet; Karaaltin, Mehmet Veli; Yildiz, Kemalettin

2012-05-01

Excessive surgical removal or traumatic loss of the tissues supporting the nasal roof can result in the "saddle nose" deformity. It involves both cartilage and bone deficiencies. Two main resources are used to reconstruct this difficult deformity: autogenous bone and cartilage grafts and alloplastic materials. This study presents the reconstruction of the dorsum, septum, internal nasal valve, and anterior structures and the tip of the nose using a block of molded autogenous bone graft. We called it the "sail graft," because it looks like a sail from a lateral view. The mast of the sail is oriented in a superior-to-inferior direction, beginning in the frontonasal region to the tip of the nose to form a straight, well-rounded dorsum. The longest postoperative follow-up of 13 cases is now 10 years; the median follow-up is 2 years. The results have been satisfactory.

SAIL Panama Canal Zone Project 2008 : Biological Survey of Panama (1910-1912)

OpenAIRE

DeHart, Liz; Haas, Stephanie C.; Walton, Jennifer; Heil, Kathy

2009-01-01

During the 18th Annual 2008 SAIL meeting at the Smithsonian Tropical Research Institute in Panama, a suggestion was made for the need to digitize and make available through the Aquatic Commons some of the early documents related to the U.S. biological survey of Panama from 1910 to 1912. With SAIL’s endeavor, a new digital project was born and this presentation describes its process, beginning to final product. The main source consulted for determining copyright clear publications was: ...

Construction of stable explicit finite-difference schemes for Schroedinger type differential equations

Science.gov (United States)

Mickens, Ronald E.

1989-01-01

A family of conditionally stable, forward Euler finite difference equations can be constructed for the simplest equation of Schroedinger type, namely u sub t - iu sub xx. Generalization of this result to physically realistic Schroedinger type equations is presented.

Simulation study of solar wind push on a charged wire: basis of solar wind electric sail propulsion

Directory of Open Access Journals (Sweden)

P. Janhunen

2007-03-01

Full Text Available One possibility for propellantless propulsion in space is to use the momentum flux of the solar wind. A way to set up a solar wind sail is to have a set of thin long wires which are kept at high positive potential by an onboard electron gun so that the wires repel and deflect incident solar wind protons. The efficiency of this so-called electric sail depends on how large force a given solar wind exerts on a wire segment and how large electron current the wire segment draws from the solar wind plasma when kept at a given potential. We use 1-D and 2-D electrostatic plasma simulations to calculate the force and present a semitheoretical formula which captures the simulation results. We find that under average solar wind conditions at 1 AU the force per unit length is (5±1×10⁻⁸ N/m for 15 kV potential and that the electron current is accurately given by the well-known orbital motion limited (OML theory cylindrical Langmuir probe formula. Although the force may appear small, an analysis shows that because of the very low weight of a thin wire per unit length, quite high final speeds (over 50 km/s could be achieved by an electric sailing spacecraft using today's flight-proved components. It is possible that artificial electron heating of the plasma in the interaction region could increase the propulsive effect even further.

Unique sail-like structure of cor triatriatum dexter in three-dimensional echocardiogram.

Science.gov (United States)

Low, Ting Ting; Uy, Celia Catherine C; Wong, Raymond Ching Chiew

2014-08-01

Cor triatriatum dexter (CTD) is an extremely rare congenital condition arising from the persistence of the right valve of the sinus venosus. It divides the right atrium (RA) into 2 separate chambers. We report a case of a 50-year-old man who had an incidental finding of CTD on transesophageal echocardiogram. An incomplete membrane of the RA was seen, and three-dimensional echocardiogram delineated the structure clearly as a triangular sail-like structure with multiple orifices and a fenestration. © 2013, Wiley Periodicals, Inc.

Managing Your Mathematics Program: A Total System. A Guide to the U-SAIL Basic Mathematics System.

Science.gov (United States)

Hales, Carma M.; Jones, Maurine E.

The Utah System Approach to Individual Learning (U-SAIL) Mathematics System was developed to make it possible for teachers to provide excellence in arithmetic instruction. It is based on the premise that in order to teach arithmetic well, teachers must accurately assess, teach directly, provide students with focused practice, corrective feedback,…

Safety and efficacy of first-line bevacizumab with chemotherapy in Asian patients with advanced nonsquamous NSCLC: results from the phase IV MO19390 (SAiL) study.

Science.gov (United States)

Tsai, Chun-Ming; Au, Joseph Siu-kie; Chang, Gee-Chen; Cheng, Ashley Chi-kin; Zhou, Caicun; Wu, Yi-long

2011-06-01

First-line treatment with bevacizumab combined with chemotherapy has been shown to improve outcomes in patients with advanced, nonsquamous non-small cell lung cancer (NSNSCLC) in phase III clinical trials. SAiL (MO19390), an open-label, multicenter, single-arm study, evaluated the safety and efficacy of first-line bevacizumab-based treatment in clinical practice. This report presents the results of a preplanned subanalysis of Asian patients enrolled in SAiL. Patients with untreated, locally advanced, metastatic or recurrent NSNSCLC received bevacizumab 7.5 or 15 mg/kg every 3 weeks plus chemotherapy for up to six cycles, followed by single-agent bevacizumab until disease progression. Eligibility criteria for SAiL permitted enrolment of a broad patient population. The primary end point was safety; secondary end points included time to disease progression and overall survival. The Asian intent-to-treat population comprised 314 of the 2212 patients enrolled in the SAiL trial. In the Asian subanalysis, patients received a median of nine cycles of bevacizumab, and the median follow-up was 16.4 months. The incidence of clinically significant adverse events (grade ≥3) of special interest was relatively low in this population (15.6% overall); proteinuria (7.6%), hypertension (4.8%), and bleeding (2.5%) were the most common. A total of five adverse events related to bevacizumab were reported as grade 5. Disease control rate was 94.1%, median time to disease progression was 8.3 months, and median overall survival was 18.9 months. The safety and efficacy of first-line bevacizumab-based treatment in Asian patients with advanced NSNSCLC is consistent with that demonstrated in phase III studies and in the overall SAiL population. There were no new safety signals.

Plasmonic nanoparticle chain in a light field: a resonant optical sail.

Science.gov (United States)

Albaladejo, Silvia; Sáenz, Juan José; Marqués, Manuel I

2011-11-09

Optical trapping and driving of small objects has become a topic of increasing interest in multidisciplinary sciences. We propose to use a chain made of metallic nanoparticles as a resonant light sail, attached by one end point to a transparent object and propelling it by the use of electromagnetic radiation. Driving forces exerted on the chain are theoretically studied as a function of radiation's wavelength and chain's alignments with respect to the direction of radiation. Interestingly, there is a window in the frequency spectrum in which null-torque equilibrium configuration, with minimum geometric cross section, corresponds to a maximum in the driving force.

Validating the Type D personality construct in Chinese patients with coronary heart disease

DEFF Research Database (Denmark)

Yu, Doris S F; Thompson, David R; Yu, Cheuk Man

2010-01-01

Type D personality predicts poor prognosis in coronary heart disease (CHD) but little is known about Type D in non-Western cultures. We examined the (a) validity of the Type D construct and its assessment with the DS14 scale in the Chinese culture, (b) prevalence of Type D, and (c) gender vs. Typ...

The SAIL databank: linking multiple health and social care datasets

Directory of Open Access Journals (Sweden)

Ford David V

2009-01-01

Full Text Available Abstract Background Vast amounts of data are collected about patients and service users in the course of health and social care service delivery. Electronic data systems for patient records have the potential to revolutionise service delivery and research. But in order to achieve this, it is essential that the ability to link the data at the individual record level be retained whilst adhering to the principles of information governance. The SAIL (Secure Anonymised Information Linkage databank has been established using disparate datasets, and over 500 million records from multiple health and social care service providers have been loaded to date, with further growth in progress. Methods Having established the infrastructure of the databank, the aim of this work was to develop and implement an accurate matching process to enable the assignment of a unique Anonymous Linking Field (ALF to person-based records to make the databank ready for record-linkage research studies. An SQL-based matching algorithm (MACRAL, Matching Algorithm for Consistent Results in Anonymised Linkage was developed for this purpose. Firstly the suitability of using a valid NHS number as the basis of a unique identifier was assessed using MACRAL. Secondly, MACRAL was applied in turn to match primary care, secondary care and social services datasets to the NHS Administrative Register (NHSAR, to assess the efficacy of this process, and the optimum matching technique. Results The validation of using the NHS number yielded specificity values > 99.8% and sensitivity values > 94.6% using probabilistic record linkage (PRL at the 50% threshold, and error rates were Conclusion With the infrastructure that has been put in place, the reliable matching process that has been developed enables an ALF to be consistently allocated to records in the databank. The SAIL databank represents a research-ready platform for record-linkage studies.

Buffer Construction Methodology in Demonstration Test For Cavern Type Disposal Facility

International Nuclear Information System (INIS)

Yoshihiro, Akiyama; Takahiro, Nakajima; Katsuhide, Matsumura; Kenji, Terada; Takao, Tsuboya; Kazuhiro, Onuma; Tadafumi, Fujiwara

2009-01-01

A number of studies concerning a cavern type disposal facility have been carried out for disposal of low level radioactive waste mainly generated by power plant decommissioning in Japan. The disposal facility is composed of an engineered barrier system with concrete pit and bentonite buffer, and planed to be constructed in sub-surface 50 - 100 meters depth. Though the previous studies have mainly used laboratory and mock-up tests, we conducted a demonstration test in a full-size cavern. The main objectives of the test were to study the construction methodology and to confirm the quality of the engineered barrier system. The demonstration test was planned as the construction of full scale mock-up. It was focused on a buffer construction test to evaluate the construction methodology and quality control in this paper. Bentonite material was compacted to 1.6 Mg/m 3 in-site by large vibrating roller in this test. Through the construction of the buffer part, a 1.6 Mg/m 3 of the density was accomplished, and the data of workability and quality is collected. (authors)

On the construction of SL(2,Z) type IIB 5-branes

International Nuclear Information System (INIS)

Lu, J.X.; Roy, S.

1999-01-01

This talk reviews our recent work on the construction of SL(2,Z) multiplets of type lIB superfivebranes. We here pay particular attention to the methods employed and some salient features of the solutions. (author)

Accounting and analysis of the real labour input for objects and types of works during NPP construction

International Nuclear Information System (INIS)

Shuvaev, P.P.

1983-01-01

A technique for determining the actual labour input for PP construction according to types of works, construction units and objects is considered. The data are presented on specific expenditures on civil engineering, heat and electric installation, insulation and anticorrosion works for construction of the Chernobylsk and Kursk NPPs. A conclusion is drawn about the necessity of computer utilization in calculating the labour input for different types of works, number of workers and planning works during the NPP construction

Approximate Method of Calculating Forces on Rudder During Ship Sailing on a Shipping Route

Directory of Open Access Journals (Sweden)

K. Zelazny

2014-09-01

Full Text Available Service speed of a ship in real weather conditions is a basic design parameter. Forecasting of this speed at preliminary design stage is made difficult by the lack of simple but at the same accurate models of forces acting upon a ship sailing on a preset shipping route. The article presents a model for calculating forces and moment on plane rudder, useful for forecasting of ship service speed at preliminary stages of ship design.

Design of the De-Orbit Sail Boom Deployment Unit

Science.gov (United States)

Meyer, Sebastian; Hillebrandt, Martin; Straubel, Marco; Huhne, Christian

2014-06-01

The design of the De-Orbit Sail boom deployment unit is strongly driven by volume constraints, which are given by the cubesat container. Four CFRP (carbon fiber reinforced polymer) booms [4] with a cross-sectional shape of a double-omega and a length of 3.6 m are reeled on one spool in the center of the unit. The deployment of the four booms are controlled by an electric motor, which acts on the boom spool. Due to the volume limitation caused by the dimensions of the cubesat deployer the deployment unit has little room for the mechanisms components. With the aim to achieve a robust design, the deployment concept of the unit has greatly changed during the development process. The history of the design as well as the mechanisms are described. Additionally the results of the flight model testing are presented.

[Simulation of vegetation indices optimizing under retrieval of vegetation biochemical parameters based on PROSPECT + SAIL model].

Science.gov (United States)

Wu, Ling; Liu, Xiang-Nan; Zhou, Bo-Tian; Liu, Chuan-Hao; Li, Lu-Feng

2012-12-01

This study analyzed the sensitivities of three vegetation biochemical parameters [chlorophyll content (Cab), leaf water content (Cw), and leaf area index (LAI)] to the changes of canopy reflectance, with the effects of each parameter on the wavelength regions of canopy reflectance considered, and selected three vegetation indices as the optimization comparison targets of cost function. Then, the Cab, Cw, and LAI were estimated, based on the particle swarm optimization algorithm and PROSPECT + SAIL model. The results showed that retrieval efficiency with vegetation indices as the optimization comparison targets of cost function was better than that with all spectral reflectance. The correlation coefficients (R2) between the measured and estimated values of Cab, Cw, and LAI were 90.8%, 95.7%, and 99.7%, and the root mean square errors of Cab, Cw, and LAI were 4.73 microg x cm(-2), 0.001 g x cm(-2), and 0.08, respectively. It was suggested that to adopt vegetation indices as the optimization comparison targets of cost function could effectively improve the efficiency and precision of the retrieval of biochemical parameters based on PROSPECT + SAIL model.

On the construction of elliptic Chudnovsky-type algorithms for multiplication in large extensions of finite fields

OpenAIRE

Ballet, Stéphane; Bonnecaze, Alexis; Tukumuli, Mila

2013-01-01

International audience; We indicate a strategy in order to construct bilinear multiplication algorithms of type Chudnovsky in large extensions of any finite field. In particular, using the symmetric version of the generalization of Randriambololona specialized on the elliptic curves, we show that it is possible to construct such algorithms with low bilinear complexity. More precisely, if we only consider the Chudnovsky-type algorithms of type symmetric elliptic, we show that the symmetric bil...

The Heliopause Electrostatic Rapid Transit System (HERTS) - Design, Trades, and Analyses Performed in a Two Year NASA Investigation of Electric Sail Propulsion Systems

Science.gov (United States)

Wiegmann, Bruce M.; Scheider, Todd; Heaton, Andrew; Vaughn, Jason; Stone, Nobie; Wright, Ken

2017-01-01

Personnel from NASA's MSFC have been investigating the feasibility of an advanced propulsion system known as the Electric Sail (E-Sail) for future scientific exploration missions. This team initially won a NASA Space Technology Mission Directorate (STMD) Phase I NASA Innovative Advanced Concept (NIAC) award and then a two-year follow-on Phase II NIAC award in October 2015. This paper documents the findings from this three-year investigation. An Electric sail, a propellant-less propulsion system, uses solar wind ions to rapidly travel either to deep space or the inner solar system. Scientific spacecraft could reach Pluto in 5 years, or the boundary of the solar system in ten to twelve years compared to the thirty-five plus years the Voyager spacecraft took. The team's recent focuses have been: 1) Developing a Particle in Cell (PIC) numeric engineering model from MSFC's experimental data on the interaction between simulated solar wind and a charged bare wire that can be applied to a variety of missions, 2) Determining what missions could benefit from this revolutionary propulsion system, 3) Conceptualizing spacecraft designs for various tasks: to reach the solar system's edge, to orbit the sun as Heliophysics sentinels, or to examine a multitude of asteroids.

Evaluation on applicability of construction methods and construction quality of low-diffusion layer of cavern type radioactive waste disposal facility

International Nuclear Information System (INIS)

Takechi, Shin-ichi; Yokozeki, Kosuke; Terada, Kenji; Akiyama, Yoshihiro; Yada, Tsutomu; Tsuji, Yukikazu

2014-01-01

A performance verification experiment of cavern type radioactive waste disposal facility with a real scale construction is being conducted to evaluate the applicability of proposed construction methods and construction quality of the facility. In this paper, we confirmed that the low-diffusion layer, which is one of the cementitious materials based members, could be filled with mortar from end to end of the member; cracks of low-diffusion layer would not affect the long-term safety evaluation of the facility. And also we figured out the relationship between the material strength and the accumulated temperature, relationship between diffusion coefficient and porosity of low-diffusion layer. (author)

Large size space construction for space exploitation

Science.gov (United States)

Kondyurin, Alexey

2016-07-01

Space exploitation is impossible without large space structures. We need to make sufficient large volume of pressurized protecting frames for crew, passengers, space processing equipment, & etc. We have to be unlimited in space. Now the size and mass of space constructions are limited by possibility of a launch vehicle. It limits our future in exploitation of space by humans and in development of space industry. Large-size space construction can be made with using of the curing technology of the fibers-filled composites and a reactionable matrix applied directly in free space. For curing the fabric impregnated with a liquid matrix (prepreg) is prepared in terrestrial conditions and shipped in a container to orbit. In due time the prepreg is unfolded by inflating. After polymerization reaction, the durable construction can be fitted out with air, apparatus and life support systems. Our experimental studies of the curing processes in the simulated free space environment showed that the curing of composite in free space is possible. The large-size space construction can be developed. A project of space station, Moon base, Mars base, mining station, interplanet space ship, telecommunication station, space observatory, space factory, antenna dish, radiation shield, solar sail is proposed and overviewed. The study was supported by Humboldt Foundation, ESA (contract 17083/03/NL/SFe), NASA program of the stratospheric balloons and RFBR grants (05-08-18277, 12-08-00970 and 14-08-96011).

Management for Construction Materials and Control of Construction Waste in Construction Industry: A Review

OpenAIRE

A. A. Gulghane; Prof P. V. Khandve

2015-01-01

In recent treads a wide range of building materials is available for the construction of civil engineering structures. The total cost of materials may be up to 60% or more of the total cost incurred in construction project dependent upon the type of project. Effective construction materials management is a key to success for a construction project. Construction waste is another serious problem in construction industry. A large and various types of construction waste with different...

Solution structure of the c-terminal dimerization domain of SARS coronavirus nucleocapsid protein solved by the SAIL-NMR method.

Science.gov (United States)

Takeda, Mitsuhiro; Chang, Chung-ke; Ikeya, Teppei; Güntert, Peter; Chang, Yuan-hsiang; Hsu, Yen-lan; Huang, Tai-huang; Kainosho, Masatsune

2008-07-18

The C-terminal domain (CTD) of the severe acute respiratory syndrome coronavirus (SARS-CoV) nucleocapsid protein (NP) contains a potential RNA-binding region in its N-terminal portion and also serves as a dimerization domain by forming a homodimer with a molecular mass of 28 kDa. So far, the structure determination of the SARS-CoV NP CTD in solution has been impeded by the poor quality of NMR spectra, especially for aromatic resonances. We have recently developed the stereo-array isotope labeling (SAIL) method to overcome the size problem of NMR structure determination by utilizing a protein exclusively composed of stereo- and regio-specifically isotope-labeled amino acids. Here, we employed the SAIL method to determine the high-quality solution structure of the SARS-CoV NP CTD by NMR. The SAIL protein yielded less crowded and better resolved spectra than uniform (13)C and (15)N labeling, and enabled the homodimeric solution structure of this protein to be determined. The NMR structure is almost identical with the previously solved crystal structure, except for a disordered putative RNA-binding domain at the N-terminus. Studies of the chemical shift perturbations caused by the binding of single-stranded DNA and mutational analyses have identified the disordered region at the N-termini as the prime site for nucleic acid binding. In addition, residues in the beta-sheet region also showed significant perturbations. Mapping of the locations of these residues onto the helical model observed in the crystal revealed that these two regions are parts of the interior lining of the positively charged helical groove, supporting the hypothesis that the helical oligomer may form in solution.

Wood construction and magnetic characteristics of impregnated type magnetic wood

International Nuclear Information System (INIS)

Oka, Hideo; Hojo, Atsushi; Seki, Kyoushiro; Takashiba, Toshio

2002-01-01

The results of experiments involving the AC and DC magnetic characteristics of impregnated type magnetic wood were studied by taking into consideration the wood construction and fiber direction. The experimental results show that the sufficient amount of impregnated magnetic fluid varies depending on the fiber direction and length, and the grain face of the wood material. The impregnated type magnetic wood sample that is fully impregnated by magnetic fluid has a 60% saturation magnetization compared to the saturation magnetization of magnetic fluid. Samples for which the wood fiber direction was the same as the direction of the magnetic path had a higher magnetization intensity and permeability

Development of logistic support for space equipment on the base of the “Sail-BMSTU” midget spacecraft

Directory of Open Access Journals (Sweden)

Brom Alla

2016-01-01

Full Text Available The paper envisages the application of integrated logistic support conception (ILS for space equipment on the base of the example of the student’s «Sail BMSTU» midget spacecraft (MS. The peculiarities of space equipment logistic support in operation phase are considered. The special focus is done to the problem of decrease in production expenses of spacecrafts. The paper suggests that the solution of this problem has to be based on tools commonly used in engineering fields – functional analysis and FMECA. The fragment of FMECA is presented. Due to FMECA it is clear what products in spacecrafts should be calibrated in accordance with quality requirements of military class and what ones should be calibrated in accordance with quality requirements of commercial and industrial classes. Each failure mode of midget spacecraft, identified within FMECA, is studied by assessing of criticality, severity and probability of emergence. The paper describes the main procedures of integrated logistic support on the base of the student’s «Sail MGTU» midget spacecraft. Recommended guidelines providing reliability of electro radio products are elaborated. The practical application of integrated logistic support in aerospace industry is reasonably presented.

Shade Sails and Passive Recreation in Public Parks of Melbourne and Denver: A Randomized Intervention

Science.gov (United States)

English, Dallas R.; Buller, Mary Klein; Simmons, Jody; Chamberlain, James A.; Wakefield, Melanie; Dobbinson, Suzanne

2017-01-01

Objectives. To test whether shade sails will increase the use of passive recreation areas (PRAs). Methods. We conducted a stratified randomized pretest–posttest controlled design study in Melbourne, Australia, and Denver, Colorado, in 2010 to 2014. We randomized a sample of 144 public parks with 2 PRAs in full sun in a 1:3 ratio to treatment or control. Shade sails were built at 1 PRA per treatment park. The outcome was any use of the study PRA (n = 576 pretest and n = 576 posttest observations; 100% follow-up). Results. Compared with control PRAs (adjusted probability of use: pretest = 0.14, posttest = 0.17), use of treatment PRAs (pretest = 0.10, posttest = 0.32) was higher at posttest (odds ratio [OR] = 3.91; 95% confidence interval [CI] = 1.71, 8.94). Shade increased use of PRAs in Denver (control: pretest = 0.18, posttest = 0.19; treatment: pretest = 0.16, posttest = 0.47) more than Melbourne (control: pretest = 0.11, posttest = 0.14; shaded: pretest = 0.06, posttest = 0.19; OR = 2.98; 95% CI = 1.09, 8.14). Conclusions. Public investment in shade is warranted for skin cancer prevention and may be especially useful in the United States. Trial Registration. Clinicaltrials.gov identifier NCT02971709. PMID:29048958

Shade Sails and Passive Recreation in Public Parks of Melbourne and Denver: A Randomized Intervention.

Science.gov (United States)

Buller, David B; English, Dallas R; Buller, Mary Klein; Simmons, Jody; Chamberlain, James A; Wakefield, Melanie; Dobbinson, Suzanne

2017-12-01

To test whether shade sails will increase the use of passive recreation areas (PRAs). We conducted a stratified randomized pretest-posttest controlled design study in Melbourne, Australia, and Denver, Colorado, in 2010 to 2014. We randomized a sample of 144 public parks with 2 PRAs in full sun in a 1:3 ratio to treatment or control. Shade sails were built at 1 PRA per treatment park. The outcome was any use of the study PRA (n = 576 pretest and n = 576 posttest observations; 100% follow-up). Compared with control PRAs (adjusted probability of use: pretest = 0.14, posttest = 0.17), use of treatment PRAs (pretest = 0.10, posttest = 0.32) was higher at posttest (odds ratio [OR] = 3.91; 95% confidence interval [CI] = 1.71, 8.94). Shade increased use of PRAs in Denver (control: pretest = 0.18, posttest = 0.19; treatment: pretest = 0.16, posttest = 0.47) more than Melbourne (control: pretest = 0.11, posttest = 0.14; shaded: pretest = 0.06, posttest = 0.19; OR = 2.98; 95% CI = 1.09, 8.14). Public investment in shade is warranted for skin cancer prevention and may be especially useful in the United States. Clinicaltrials.gov identifier NCT02971709.

Engineering zonal cartilage through bioprinting collagen type II hydrogel constructs with biomimetic chondrocyte density gradient.

Science.gov (United States)

Ren, Xiang; Wang, Fuyou; Chen, Cheng; Gong, Xiaoyuan; Yin, Li; Yang, Liu

2016-07-20

Cartilage tissue engineering is a promising approach for repairing and regenerating cartilage tissue. To date, attempts have been made to construct zonal cartilage that mimics the cartilaginous matrix in different zones. However, little attention has been paid to the chondrocyte density gradient within the articular cartilage. We hypothesized that the chondrocyte density gradient plays an important role in forming the zonal distribution of extracellular matrix (ECM). In this study, collagen type II hydrogel/chondrocyte constructs were fabricated using a bioprinter. Three groups were created according to the total cell seeding density in collagen type II pre-gel: Group A, 2 × 10(7) cells/mL; Group B, 1 × 10(7) cells/mL; and Group C, 0.5 × 10(7) cells/mL. Each group included two types of construct: one with a biomimetic chondrocyte density gradient and the other with a single cell density. The constructs were cultured in vitro and harvested at 0, 1, 2, and 3 weeks for cell viability testing, reverse-transcription quantitative PCR (RT-qPCR), biochemical assays, and histological analysis. We found that total ECM production was positively correlated with the total cell density in the early culture stage, that the cell density gradient distribution resulted in a gradient distribution of ECM, and that the chondrocytes' biosynthetic ability was affected by both the total cell density and the cell distribution pattern. Our results suggested that zonal engineered cartilage could be fabricated by bioprinting collagen type II hydrogel constructs with a biomimetic cell density gradient. Both the total cell density and the cell distribution pattern should be optimized to achieve synergistic biological effects.

A Velocity Prediction Procedure for Sailing Yachts with a hydrodynamic Model based on integrated fully coupled RANSE-Free-Surface Simulations

NARCIS (Netherlands)

Boehm, C.

2014-01-01

One of the most important tools in today's sailing yacht design is the Velocity Prediction Program (VPP). VPPs calculate boat speed from the equilibrium of aero- and hydrodynamic flow forces. Consequently their accuracy is linked to the accuracy of the aero- and hydrodynamic data used to represent a

Lévy matters VI Lévy-type processes moments, construction and heat kernel estimates

CERN Document Server

Kühn, Franziska

2017-01-01

Presenting some recent results on the construction and the moments of Lévy-type processes, the focus of this volume is on a new existence theorem, which is proved using a parametrix construction. Applications range from heat kernel estimates for a class of Lévy-type processes to existence and uniqueness theorems for Lévy-driven stochastic differential equations with Hölder continuous coefficients. Moreover, necessary and sufficient conditions for the existence of moments of Lévy-type processes are studied and some estimates on moments are derived. Lévy-type processes behave locally like Lévy processes but, in contrast to Lévy processes, they are not homogeneous in space. Typical examples are processes with varying index of stability and solutions of Lévy-driven stochastic differential equations. This is the sixth volume in a subseries of the Lecture Notes in Mathematics called Lévy Matters. Each volume describes a number of important topics in the theory or applicati ons of Lévy processes and pays ...

Collimated proton acceleration in light sail regime with a tailored pinhole target

Energy Technology Data Exchange (ETDEWEB)

Wang, H. Y.; Zepf, M. [Helmholtz Institute Jena, Fröbelstieg 3, 07743 Jena (Germany); Yan, X. Q. [State Key Laboratory of Nuclear Physics and Technology and Key Lab of High Energy Density Physics Simulation, CAPT, Peking University, Beijing 100871 (China)

2014-06-15

A scheme for producing collimated protons from laser interactions with a diamond-like-carbon + pinhole target is proposed. The process is based on radiation pressure acceleration in the multi-species light-sail regime [B. Qiao et al., Phys. Rev. Lett. 105, 155002 (2010); T. P. Yu et al., Phys. Rev. Lett. 105, 065002 (2010)]. Particle-in-cell simulations demonstrate that transverse quasistatic electric field at TV/m level can be generated in the pinhole. The transverse electric field suppresses the transverse expansion of protons effectively, resulting in a higher density and more collimated proton beam compared with a single foil target. The dependence of the proton beam divergence on the parameters of the pinhole is also investigated.

Re-Thinking the Use of the OML Model in Electric-Sail Development

Science.gov (United States)

Stone, Nobie H.

2016-01-01

The Orbit Motion Limited (OML) model commonly forms the basis for calculations made to determine the effect of the long, biased wires of an Electric Sail on solar wind protons and electrons (which determines the thrust generated and the required operating power). A new analysis of the results of previously conducted ground-based experimental studies of spacecraft-space plasma interactions indicate that the expected thrust created by deflected solar wind protons and the current of collected solar wind electrons could be considerably higher than the OML model would suggest. Herein the experimental analysis will be summarized and the assumptions and approximations required to derive the OML equation-and the limitations they impose-will be considered.

Collimated proton acceleration in light sail regime with a tailored pinhole target

International Nuclear Information System (INIS)

Wang, H. Y.; Zepf, M.; Yan, X. Q.

2014-01-01

A scheme for producing collimated protons from laser interactions with a diamond-like-carbon + pinhole target is proposed. The process is based on radiation pressure acceleration in the multi-species light-sail regime [B. Qiao et al., Phys. Rev. Lett. 105, 155002 (2010); T. P. Yu et al., Phys. Rev. Lett. 105, 065002 (2010)]. Particle-in-cell simulations demonstrate that transverse quasistatic electric field at TV/m level can be generated in the pinhole. The transverse electric field suppresses the transverse expansion of protons effectively, resulting in a higher density and more collimated proton beam compared with a single foil target. The dependence of the proton beam divergence on the parameters of the pinhole is also investigated

Goal Attainment Scaling: A Primary Method of Treatment and Program Evaluation in Project SAIL - A Special Education Dropout Prevention Program.

Science.gov (United States)

Harris, Linda Hall; Thompson, John L.

The manual discusses Project SAIL's (a special dropout prevention program) use of Goal Attainment Scaling as part of individualized education plans in the treatment of troubled adolescents and in overall program evaluation. The scaling is characterized as an explicit, respectful treatment contact through which the adolescent can learn to set…

Construction of a bacterial artificial chromosome library of S-type CMS maize mitochondria

Institute of Scientific and Technical Information of China (English)

无

2000-01-01

In order to isolate mitochondrial genes easily, we have developed a new method to construct S-type CMS maize mitochondrial gene library by means of embedding mitochondria and enzymatic digesting mitochondria in situ, preparing mtDNA by electrophoresis, digesting LMP agarose with β-agarase, using BAC vector and electroporation. About 2 500 white clones of Mo17 CMS-J mitochondrial gene library were obtained with the average size of 18.24 kb, ranging from 5 to 40 kb, 63.6% inserts came from mitochondrial genome and represented 48 ′ mitochondrial genome equivalents. All the probes had detected the positive clones in the gene library. It is helpful to elucidating the maize mitochondrial genome structure and mechanism of S-type CMS, and may give some valuable reference to the construction of other plant mitochondrial genome library.

Feasibility Study for a Near Term Demonstration of Laser-Sail Propulsion from the Ground to Low Earth Orbit

Science.gov (United States)

Montgomery, Edward E., IV; Johnson, Les; Thomas, Herbert D.

2016-01-01

This paper adds to the body of research related to the concept of propellant-less in-space propulsion utilizing an external high energy laser (HEL) to provide momentum to an ultra-lightweight (gossamer) spacecraft. It has been suggested that the capabilities of Space Situational Awareness assets and the advanced analytical tools available for fine resolution orbit determination make it possible to investigate the practicalities of a ground to Low Earth Orbit (LEO) demonstration at delivered power levels that only illuminate a spacecraft without causing damage to it. The degree to which this can be expected to produce a measurable change in the orbit of a low ballistic coefficient spacecraft is investigated. Key system characteristics and estimated performance are derived for a near term mission opportunity involving the LightSail 2 spacecraft and laser power levels modest in comparison to those proposed previously by Forward, Landis, or Marx. [1,2,3] A more detailed investigation of accessing LightSail 2 from Santa Rosa Island on Eglin Air Force Base on the United States coast of the Gulf of Mexico is provided to show expected results in a specific case.

Effects of DeOrbitSail as applied to Lifetime predictions of Low Earth Orbit Satellites

Science.gov (United States)

Afful, Andoh; Opperman, Ben; Steyn, Herman

2016-07-01

Orbit lifetime prediction is an important component of satellite mission design and post-launch space operations. Throughout its lifetime in space, a spacecraft is exposed to risk of collision with orbital debris or operational satellites. This risk is especially high within the Low Earth Orbit (LEO) region where the highest density of space debris is accumulated. This paper investigates orbital decay of some LEO micro-satellites and accelerating orbit decay by using a deorbitsail. The Semi-Analytical Liu Theory (SALT) and the Satellite Toolkit was employed to determine the mean elements and expressions for the time rates of change. Test cases of observed decayed satellites (Iridium-85 and Starshine-1) are used to evaluate the predicted theory. Results for the test cases indicated that the theory fitted observational data well within acceptable limits. Orbit decay progress of the SUNSAT micro-satellite was analysed using relevant orbital parameters derived from historic Two Line Element (TLE) sets and comparing with decay and lifetime prediction models. This paper also explored the deorbit date and time for a 1U CubeSat (ZACUBE-01). The use of solar sails as devices to speed up the deorbiting of LEO satellites is considered. In a drag sail mode, the deorbitsail technique significantly increases the effective cross-sectional area of a satellite, subsequently increasing atmospheric drag and accelerating orbit decay. The concept proposed in this study introduced a very useful technique of orbit decay as well as deorbiting of spacecraft.

Estados de humor de velejadores durante o Pré-Panamericano Mood states sail athletes during the Pre-Panamerican

Directory of Open Access Journals (Sweden)

Ricardo Brandt

2010-12-01

Full Text Available O objetivo da presente pesquisa foi avaliar os estados de humor de velejadores após regatas do Pré-Panamericana de Vela, bem como fatores associados. A amostra foi composta por 18 atletas de ambos os sexos, que foram avaliados por meio da Escala de Humor de Brunel. Os atletas apresentaram elevada tensão e fadiga, associadas a altos níveis de vigor. Homens apresentaram maior vigor e fadiga, e menor tensão, depressão e raiva do que as mulheres, porém sem diferenças estatísticamente significativas. Quanto à classe, velejadores de classes individuais apresentaram maior tensão, depressão e confusão do que os de classes com dois tripulantes, porém sem diferenças estatísticamente significativas. Os estados de humor apresentados pelos atletas após regatas do Pré-Panamericano de Vela podem ser considerados diferente do ideal para o rendimento esportivo, porém ainda existe pouco domínio teórico dos estados de humor de velejadores para análises mais aprofundadas.The purpose of this research was to evaluate de mood states after regattas of sail during Pre-Panamerican, as well associated factors. Sample was composed by 18 athletes of both sexes that were evaluated by the Brunel Mood Scale. The athletes presented high tension and fatigue, associated with high levels of vigor. The men present higher vigor and fatigue, and low tension, depression and angry than the women, but the differences were no significant. About the class, the athletes of individual classes showed high tension, depression and confusion than the ones of the classes with two athletes, but there were no significant differences. The mood states presented by the athletes after the regattas of sail of the Pre-Panamerican can be considered different from the ideal to sporting performance, but already there is a little bit theory about the mood states of sail athletes to do a deep analysis.

An analysis of the effect of endplates upon the fin keel of a sailing yacht

International Nuclear Information System (INIS)

Andrews, G.T.; Raiskums, C.L.; Keffer, J.F.

1985-01-01

A long-term investigation is presently underway to assess the overall performance of the modern design of fin keels for sailing yachts. An ultimate goal is to determine the specific advantages for such designs with respect to a centre-board configuration with outside ballast. The present preliminary studies were carried out to determine the basic performance of a typical fin keel shape for various values of leeway angle. A second aspect was to determine the effect upon this baseline performance of a number of endplates of varying sizes and shapes. (author)

Solar Sail Attitude Control System for the NASA Near Earth Asteroid Scout Mission

Science.gov (United States)

Orphee, Juan; Diedrich, Ben; Stiltner, Brandon; Becker, Chris; Heaton, Andrew

2017-01-01

An Attitude Control System (ACS) has been developed for the NASA Near Earth Asteroid (NEA) Scout mission. The NEA Scout spacecraft is a 6U cubesat with an eighty-six square meter solar sail for primary propulsion that will launch as a secondary payload on the Space Launch System (SLS) Exploration Mission 1 (EM-1) and rendezvous with a target asteroid after a two year journey, and will conduct science imagery. The spacecraft ACS consists of three major actuating subsystems: a Reaction Wheel (RW) control system, a Reaction Control System (RCS), and an Active Mass Translator (AMT) system. The reaction wheels allow fine pointing and higher rates with low mass actuators to meet the science, communication, and trajectory guidance requirements. The Momentum Management System (MMS) keeps the speed of the wheels within their operating margins using a combination of solar torque and the RCS. The AMT is used to adjust the sign and magnitude of the solar torque to manage pitch and yaw momentum. The RCS is used for initial de-tumble, performing a Trajectory Correction Maneuver (TCM), and performing momentum management about the roll axis. The NEA Scout ACS is able to meet all mission requirements including attitude hold, slews, pointing for optical navigation and pointing for science with margin and including flexible body effects. Here we discuss the challenges and solutions of meeting NEA Scout mission requirements for the ACS design, and present a novel implementation of managing the spacecraft Center of Mass (CM) to trim the solar sail disturbance torque. The ACS we have developed has an applicability to a range of potential missions and does so in a much smaller volume than is traditional for deep space missions beyond Earth.

Safety and efficacy of first-line bevacizumab combination therapy in Chinese population with advanced non-squamous NSCLC: data of subgroup analyses from MO19390 (SAiL) study.

Science.gov (United States)

Zhou, C C; Bai, C X; Guan, Z Z; Jiang, G L; Shi, Y K; Wang, M Z; Wu, Y L; Zhang, Y P; Zhu, Y Z

2014-05-01

Bevacizumab is a monoclonal antibody with high antitumor activity against malignant diseases. Previous studies have demonstrated the efficacy of first-line bevacizumab combination therapy in advanced, non-squamous non-small cell lung cancer (NS-NSCLC). SAiL (MO19390), an open-label, multicenter, single-arm study, evaluated the safety and efficacy of first-line bevacizumab-based treatment in clinical practice. This report presents the results of a subgroup analysis of Chinese patients enrolled in SAiL. Chemo-naive Chinese patients with locally advanced, metastatic or recurrent NSCLC were randomized to receive Bev 15 mg/kg every 3 weeks plus carboplatin + paclitaxel for maximum of six cycles, followed by single-agent bevacizumab until disease progression. The primary endpoint was safety. Secondary endpoints included time to progression and overall survival. The Chinese intent-to-treat (ITT) population consists of 198 Chinese patients, among whom 107 (54 %) were non-smokers and 90 (45.5 %) were female. The median cycle of bevacizumab administration was 10 and median duration of bevacizumab treatment was 29.5 weeks. Only eight cases of severe adverse events were observed in the study, which were deemed to be related to bevacizumab. The incidence of AEs over grade 3 in Chinese ITT patients was generally low (SAiL study. No new safety signals were reported.

Jørn Utzon’s Maritime Origins

DEFF Research Database (Denmark)

Jaeger, Thomas Arvid

2014-01-01

Article about Jørn Utzons and the influence on his architecture comming from his early years with sailing, and learning about boat construction and the design principles from his father - the yacht designer Aage Utzon.......Article about Jørn Utzons and the influence on his architecture comming from his early years with sailing, and learning about boat construction and the design principles from his father - the yacht designer Aage Utzon....

The sail-backed reptile Ctenosauriscus from the latest Early Triassic of Germany and the timing and biogeography of the early archosaur radiation.

Directory of Open Access Journals (Sweden)

Richard J Butler

Full Text Available BACKGROUND: Archosaurs (birds, crocodilians and their extinct relatives including dinosaurs dominated Mesozoic continental ecosystems from the Late Triassic onwards, and still form a major component of modern ecosystems (>10,000 species. The earliest diverse archosaur faunal assemblages are known from the Middle Triassic (c. 244 Ma, implying that the archosaur radiation began in the Early Triassic (252.3-247.2 Ma. Understanding of this radiation is currently limited by the poor early fossil record of the group in terms of skeletal remains. METHODOLOGY/PRINCIPAL FINDINGS: We redescribe the anatomy and stratigraphic position of the type specimen of Ctenosauriscus koeneni (Huene, a sail-backed reptile from the Early Triassic (late Olenekian Solling Formation of northern Germany that potentially represents the oldest known archosaur. We critically discuss previous biomechanical work on the 'sail' of Ctenosauriscus, which is formed by a series of elongated neural spines. In addition, we describe Ctenosauriscus-like postcranial material from the earliest Middle Triassic (early Anisian Röt Formation of Waldhaus, southwestern Germany. Finally, we review the spatial and temporal distribution of the earliest archosaur fossils and their implications for understanding the dynamics of the archosaur radiation. CONCLUSIONS/SIGNIFICANCE: Comprehensive numerical phylogenetic analyses demonstrate that both Ctenosauriscus and the Waldhaus taxon are members of a monophyletic grouping of poposauroid archosaurs, Ctenosauriscidae, characterised by greatly elongated neural spines in the posterior cervical to anterior caudal vertebrae. The earliest archosaurs, including Ctenosauriscus, appear in the body fossil record just prior to the Olenekian/Anisian boundary (c. 248 Ma, less than 5 million years after the Permian-Triassic mass extinction. These earliest archosaur assemblages are dominated by ctenosauriscids, which were broadly distributed across northern Pangea and

The sail-backed reptile Ctenosauriscus from the latest Early Triassic of Germany and the timing and biogeography of the early archosaur radiation.

Science.gov (United States)

Butler, Richard J; Brusatte, Stephen L; Reich, Mike; Nesbitt, Sterling J; Schoch, Rainer R; Hornung, Jahn J

2011-01-01

Archosaurs (birds, crocodilians and their extinct relatives including dinosaurs) dominated Mesozoic continental ecosystems from the Late Triassic onwards, and still form a major component of modern ecosystems (>10,000 species). The earliest diverse archosaur faunal assemblages are known from the Middle Triassic (c. 244 Ma), implying that the archosaur radiation began in the Early Triassic (252.3-247.2 Ma). Understanding of this radiation is currently limited by the poor early fossil record of the group in terms of skeletal remains. We redescribe the anatomy and stratigraphic position of the type specimen of Ctenosauriscus koeneni (Huene), a sail-backed reptile from the Early Triassic (late Olenekian) Solling Formation of northern Germany that potentially represents the oldest known archosaur. We critically discuss previous biomechanical work on the 'sail' of Ctenosauriscus, which is formed by a series of elongated neural spines. In addition, we describe Ctenosauriscus-like postcranial material from the earliest Middle Triassic (early Anisian) Röt Formation of Waldhaus, southwestern Germany. Finally, we review the spatial and temporal distribution of the earliest archosaur fossils and their implications for understanding the dynamics of the archosaur radiation. Comprehensive numerical phylogenetic analyses demonstrate that both Ctenosauriscus and the Waldhaus taxon are members of a monophyletic grouping of poposauroid archosaurs, Ctenosauriscidae, characterised by greatly elongated neural spines in the posterior cervical to anterior caudal vertebrae. The earliest archosaurs, including Ctenosauriscus, appear in the body fossil record just prior to the Olenekian/Anisian boundary (c. 248 Ma), less than 5 million years after the Permian-Triassic mass extinction. These earliest archosaur assemblages are dominated by ctenosauriscids, which were broadly distributed across northern Pangea and which appear to have been the first global radiation of archosaurs.

Experimental Investigation of Effect of the Sail with Leading Edge Fillet on Flow around a Submarine

OpenAIRE

Mohsen Rahmany; Amir Hamzeh Farajollahi; Mojtaba Dehghan Manshadi

2016-01-01

Because of connecting the various appendages of submarine to the main body the vortices have been created that disrupt the flow uniformity and make the undesirable features such as vortex formation to flow. Vortices that have been created due to the connectivity of sail to the body of submarines have a significant impact on non-uniformity of submarine wake at location of the propeller disc. In present research the use of hot wire anemometer has created vertical flow field in back of the two s...

Meteoroid Measurements in the Deep Space Cruising and the Jupiter Trojan Rendezvous Phases of the Solar Power Sail Mission by the Arrayed Large-Area Dust Detectors in INterplanetary Space (ALADDIN)-II

Science.gov (United States)

Yano, H.; Hirai, T.; Arai, K.; Fujii, M.

2017-12-01

The PVDF thin films have been long, space-proven instruments for hypervelocity impact detection in the diverse regions of the Solar System from orbits of Venus by IKAROS and of Pluto by New Horizons. In particular, light weight but large area membranes of a solar sail spacecraft is an ideal location for such detectors to be deployed for detecting statistically enough nubers of so large micrometeoroids that are sensitive to mean motion resonances and other gravitational effects of flux enhancements and voids with planets. The IKAROS spacecraft first detected in situ dust flux enhancement and gap region within the Earth's circumsolar dust ring as well as those of Venus by 0.54 m^2 detection area of ALADDIN sensors on the slar sail membrane. Advancing this heritage, the Solar Power Sail membrane will carry 0.4+ m^2 ALADDIN-II PVDF sensors with improved impact signal prosessng units to detect both hyperveloity dust impacts in the interplanetary space cruising phase and slow dust impacts bound to the Jupiter Trojan region in its rendezvours phase.

The cardiovascular work of competitive dinghy sailing.

Science.gov (United States)

Felici, F; Rodio, A; Madaffari, A; Ercolani, L; Marchetti, M

1999-12-01

Hiking is the special manoeuvre, which the dinghy sailor uses to counterbalance the capsizing effect of the wind on the boat. In the present research the work required of the heart by this exercise was studied in the laboratory using a boat simulator. Seven Laser male sailors selected from those in the first places in the junior national rank participated in this study. Their endurance, at different levels of isometric hiking efforts, was measured. Energy expenditure due to hiking was estimated from measurements of oxygen consumption, carbon dioxide elimination and blood lactate concentration. The cardiac load was evaluated by measuring blood pressure using the conventional method and heart rate measured by electrocardiography. Cardiac output was measured using the CO2 re-breathing method. Left ventricular work was then calculated as cardiac output multiplied by mean arterial pressure. The most relevant result was that, while whole body cost of hiking was relatively low (about 1 IO2 min-1), the power of the heart was very significant: cardiac output almost doubled with respect to that at rest and arterial mean pressure rose from 12.5 kPa (rest) to 18.5 kPa (hiking). Thus, left ventricular power rose from 1.2 Watt to 3.2 Watt, which is a typical cardiovascular response to muscular isometric contraction. These results assume relevance when a person's eligibility for sailing sports is evaluated.

Performance Comparisons and Down Selection of Small Motors for Two-Blade Heliogyro Solar Sail 6U CubeSat

Science.gov (United States)

Wiwattananon, Peerawan; Bryant, Robert G.

2015-01-01

This report compiles a review of 130 commercial small scale motors (piezoelectric and electric motors) and almost 20 researched-type small scale piezoelectricmotors for potential use in a 2 blades Heliogyro Solar Sail 6U CubeSat. In this application, a motor and gearhead (drive system) will deploy a roll of solar sailthin film (2 um thick)accommodated in a 2U CubeSat (100 x 200 x 100 mm) housing. The application requirements are: space rated, output torque at fulldeployment of 0.8 Nm, reel speed of 3 rpm, drive system weight limited to 150 grams, diameter limited to 50 mm, and the length not to exceed 40 mm. The 50mm diameter limit was imposed as motors with larger diameters would likely weigh too much and use more space on the satellite wall. This would limit theamount of the payload. The motors performance are compared between small scale, volume within 3x102 cm3 (3x105 mm3), commercial electric DC motors,commercial piezoelectric motors, and researched-type (non-commercial) piezoelectric motors extracted from scientific and product literature. The comparisonssuggest that piezoelectric motors without a gearhead exhibit larger output torque with respect to their volume and weight and require less input power toproduce high torque. A commercially available electric motor plus a gearhead was chosen through a proposed selection process to meet the applications designrequirements.

Tissue-engineered cartilaginous constructs for the treatment of caprine cartilage defects, including distribution of laminin and type IV collagen.

Science.gov (United States)

Jeng, Lily; Hsu, Hu-Ping; Spector, Myron

2013-10-01

The purpose of this study was the immunohistochemical evaluation of (1) cartilage tissue-engineered constructs; and (2) the tissue filling cartilage defects in a goat model into which the constructs were implanted, particularly for the presence of the basement membrane molecules, laminin and type IV collagen. Basement membrane molecules are localized to the pericellular matrix in normal adult articular cartilage, but have not been examined in tissue-engineered constructs cultured in vitro or in tissue filling cartilage defects into which the constructs were implanted. Cartilaginous constructs were engineered in vitro using caprine chondrocyte-seeded type II collagen scaffolds. Autologous constructs were implanted into 4-mm-diameter defects created to the tidemark in the trochlear groove in the knee joints of skeletally mature goats. Eight weeks after implantation, the animals were sacrificed. Constructs underwent immunohistochemical and histomorphometric evaluation. Widespread staining for the two basement membrane molecules was observed throughout the extracellular matrix of in vitro and in vivo samples in a distribution unlike that previously reported for cartilage. At sacrifice, 70% of the defect site was filled with reparative tissue, which consisted largely of fibrous tissue and some fibrocartilage, with over 70% of the reparative tissue bonded to the adjacent host tissue. A novel finding of this study was the observation of laminin and type IV collagen in in vitro engineered cartilaginous constructs and in vivo cartilage repair samples from defects into which the constructs were implanted, as well as in normal caprine articular cartilage. Future work is needed to elucidate the role of basement membrane molecules during cartilage repair and regeneration.

Pontryagin-Thom-Szucs type construction for non-positive codimensional singular maps with prescribed singular fibers

OpenAIRE

Kalmar, Boldizsar

2006-01-01

We give a Pontryagin-Thom-Szucs type construction for non-positive codimensional singular maps, and obtain results about cobordism and bordism groups of -1 codimensional stable maps with prescribed singular fibers.

Manoeuvring Simulations and Trials of a Flatfish Type AUV

DEFF Research Database (Denmark)

Aage, Christian

1997-01-01

-scale PMM tank tests are presented. The test data have been used in a dedicated simulation program, intended for the development of "MARTIN"s control system and autopilot. The simulation program is used here to simulate a series of standard manoeuvres, such as turning circles and zigzag tests. Similar free-sailing...... manoeuvrability trial tests are described and compared to the simulations. The free-sailing manoeuvres were monitored by the Differential Global Positioning System (DGPS)....

Evaluation on construction quality of pit filler material of cavern type radioactive waste disposal facility

International Nuclear Information System (INIS)

Takechi, Shin-ichi; Yokozeki, Kosuke; Shimbo, Hiroshi; Terada, Kenji; Akiyama, Yoshihiro; Yada, Tsutomu; Tsuji, Yukikazu

2014-01-01

The pit filler material of the underground cavern-type radioactive waste disposal facility, which is poured directly around the radioactive waste packages where high temperature environment is assumed by their decay heat, is concerned to be adversely affected on the filling behavior and its hardened properties. There also are specific issues that required quality of construction must be achieved by unmanned construction with remote operation, because the pit filler construction shall be done under radiation environment. In this paper, the mix proportion of filler material is deliberated with filling experiments simulating high temperature environment, and also the effect of temperature on hardened properties are confirmed with high temperature curing test. Subsequently, the feasibility of unmanned construction method of filler material by pumping, and by movable bucket, are comparatively discussed through a real size demonstration. (author)

Assembly of Space CFRP Structures with Racing Sailing Boats Technology

Science.gov (United States)

Nieto, Jose; Yuste, Laura; Pipo, Alvaro; Santarsiero, Pablo; Bureo, Rafael

2014-06-01

Carbon Fiber Reinforced Plastic (CFRP) is commonly used in space applications to get structures with good mechanical performances and a reduced mass. Most of larger parts of spatial structures are already made of CFRP but the achieved weight saving may be jeopardized by the use of metallic brackets as joining elements. This paper describes the work carried out to study and evaluate ways of reducing weight and costs of the joints between structural elements commonly used in space applications.The main objective of this project is to adapt design solutions coming from the racing sailing boats technology to space applications: the use of out-of autoclave (OoA) cured CFRP joints. In addition to that other CFRP solution common in space business, 3D- RTM Bracket, has been evaluated.This development studies the manufacturing and assembly feasibility making use of these CFRP technologies.This study also compares traditional metallic solutions with innovative CFRP ones in terms of mechanical performances at elementary level. Weight and cost of presented solutions are also compared.

A translational research evaluation of the Stay Active and Independent for Life (SAIL) community-based fall prevention exercise and education program.

Science.gov (United States)

York, Sally C; Shumway-Cook, Anne; Silver, Ilene F; Morrison, A Clare

2011-11-01

Falls in older adults are the leading cause of injury hospitalizations and fatalities in the United States; primary risk factors are muscle weakness, impaired mobility, and balance deficits. This article describes the 12-month translational research evaluation of the Stay Active and Independent for Life (SAIL) community-based public health, public domain fall prevention exercise and education program. Recruitment reached the target goal by 154%; 331 adults (mean age = 74.6) attended more than one class (mean classes attended = 24.8, SD = 26.6, range = 1-120) at nine community sites in one county in the 12-month period; 173 completed health and demographic forms, 132 completed program surveys, and 91 completed baseline and follow-up physical function tests. Physical function test results showed significant improvements in strength, balance, and mobility in those who were below normal limits at baseline, and in those who attended classes twice a week or more for more than 2 months. Survey results found that 93% of respondents reported improved performance of daily activities; 92% reported improved strength, balance, fitness, or flexibility; and 80% found the SAIL information guide education component helpful.

Heterotic string construction

International Nuclear Information System (INIS)

Schellekens, A.N.

1989-01-01

In this paper an elementary introduction to the principles of four-dimensional string construction will be given. Although the emphasis is on lattice constructions, almost all results have further, and often quite straightforward generalizations to other constructions. Since heterotic strings look phenomenologically more promising than type-II theories the authors only consider the former, although everything can easily be generalized to type-II theories. Some additional aspects of lattice constructions are discussed, and an extensive review can be found

A Decision Support Concept for a construction design project – selecting the type of glass façade

Directory of Open Access Journals (Sweden)

Franjo Šimić

2017-01-01

Full Text Available The paper describes research into the possibility of developing a concept for supporting decisions in planning construction projects (one of the most important stages of construction project management. The focus is on supporting decisions in selecting the type of and solution for the glass façade in the main design. Materials and types of soluteons for a glass façade were analyzed and alternative solutions were obtained. The concept was developed in that it included relevant stakeholders in the decision-making process during the construction design. These stakeholders were the investor, architect, and construction contractor. The analysis was carried out and a hierarchical structure of objectives was formed as a goal tree. The criteria at the last hierarchical level were used to evaluate alternative solutions for the glass façade, and their weights were determined by all stakeholders using the AHP method (Analytic Hierarchy Process. Using PROMETHEE (Preference Ranking Method for Enrichment Evaluation, a comparison of alternative solutions for the glass façade was conducted and the alternatives were ranked according to the priorities for inclusion into the main design. The concept was tested by selecting a type of glass façade on a residential-commercial building in the city of Rijeka, Croatia.

Validity of the Type D personality construct in Danish post-MI patients and healthy controls

DEFF Research Database (Denmark)

Pedersen, Susanne S.; Denollet, Johan

2004-01-01

Type D personality has been associated with increased risk of depression, vital exhaustion, social alienation, a higher number of reinfarctions, and higher mortality rates in patients with established coronary artery disease (CAD) independent of traditional biomedical risk factors. The construct ...

Perspectives of construction robots

Science.gov (United States)

Stepanov, M. A.; Gridchin, A. M.

2018-03-01

This article is an overview of construction robots features, based on formulating the list of requirements for different types of construction robots in relation to different types of construction works.. It describes a variety of construction works and ways to construct new or to adapt existing robot designs for a construction process. Also, it shows the prospects of AI-controlled machines, implementation of automated control systems and networks on construction sites. In the end, different ways to develop and improve, including ecological aspect, the construction process through the wide robotization, creating of data communication networks and, in perspective, establishing of fully AI-controlled construction complex are formulated.

Construction of normal-regular decisions of Bessel typed special system

Science.gov (United States)

Tasmambetov, Zhaksylyk N.; Talipova, Meiramgul Zh.

2017-09-01

Studying a special system of differential equations in the separate production of the second order is solved by the degenerate hypergeometric function reducing to the Bessel functions of two variables. To construct a solution of this system near regular and irregular singularities, we use the method of Frobenius-Latysheva applying the concepts of rank and antirank. There is proved the basic theorem that establishes the existence of four linearly independent solutions of studying system type of Bessel. To prove the existence of normal-regular solutions we establish necessary conditions for the existence of such solutions. The existence and convergence of a normally regular solution are shown using the notion of rank and antirank.

Construction of type-II Bäcklund transformation for the mKdV hierarchy

International Nuclear Information System (INIS)

Gomes, J F; Retore, A L; Zimerman, A H

2015-01-01

From an algebraic construction of the mKdV hierarchy we observe that the space component of the Lax operator plays the role of a universal algebraic object. This fact induces the universality of a gauge transformation that relates two field configurations of a given member of the hierarchy. Such gauge transformation generates the Bäcklund transformation (BT). In this paper we propose a systematic construction of BT for the entire mKdV hierarchy from the known type-II BT of the sinh-Gordon theory. We explicitly construct the BT of the first few integrable models associated to positive and negative grade-time evolutions. Solutions of these transformations for several cases describing the transition from vacuum–vacuum and the vacuum to one-soliton solutions which determines the value for the auxiliary field and the Bäcklund parameter respectively, independently of the model. The same follows for the scattering of two one-soliton solutions. The resultant delay is determined by a condition independent of the model considered. (paper)

MO19390 (SAiL): bleeding events in a phase IV study of first-line bevacizumab with chemotherapy in patients with advanced non-squamous NSCLC.

Science.gov (United States)

Dansin, Eric; Cinieri, Saverio; Garrido, Pilar; Griesinger, Frank; Isla, Dolores; Koehler, Manfred; Kohlhaeufl, Martin

2012-06-01

The clinical benefit and safety profile associated with first-line bevacizumab with doublet chemotherapy in patients with advanced non-squamous non-small cell lung cancer (NSCLC) was established in two large phase III studies, E4599 and AVAiL. SAiL, a single-arm phase IV study, was conducted to evaluate bevacizumab with a range of first-line chemotherapy regimens in a routine oncology practice setting. This analysis of the SAiL data was undertaken to specifically evaluate bleeding adverse events (AEs) in this study, and to explore potential associations between bleeding and baseline patient and disease characteristics. In total, 2212 patients were evaluated. Bleeding AEs (any grade) occurred in 38.2% of patients (grade ≥ 3 bleeding AEs: 3.6%). Grade ≥ 3 pulmonary hemorrhage and central nervous system bleeding events were observed in 0.7% and 0.1% of patients, respectively. The incidence of grade ≥ 3 bleeding AEs was comparable across patient subgroups defined by central tumor location, tumor cavitation, histology, concomitant anticoagulation therapy and age. The majority (88.6%) of bleeding events resolved or improved, 10.2% persisted and 1.3% led to death; 10.2% of bleeding events required bevacizumab interruption or discontinuation. This analysis from the SAiL trial reaffirms a comparable incidence of clinically significant bleeding associated with first-line bevacizumab and chemotherapy as previous phase III studies in NSCLC patients despite less stringent first-line selection criteria. Grade ≥ 3 bleeding appears to be comparable when analyzed for patient and tumor characteristics, including tumor cavitation and concomitant anticoagulation therapy. Most bleeding events resolved or improved, and interruption/discontinuation of bevacizumab was infrequent in a standard oncology practice setting. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Study of the Riemann problem and construction of multidimensional Godunov-type schemes for two-phase flow models

International Nuclear Information System (INIS)

Toumi, I.

1990-04-01

This thesis is devoted to the study of the Riemann problem and the construction of Godunov type numerical schemes for one or two dimensional two-phase flow models. In the first part, we study the Riemann problem for the well-known Drift-Flux, model which has been widely used for the analysis of thermal hydraulics transients. Then we use this study to construct approximate Riemann solvers and we describe the corresponding Godunov type schemes for simplified equation of state. For computation of complex two-phase flows, a weak formulation of Roe's approximate Riemann solver, which gives a method to construct a Roe-averaged jacobian matrix with a general equation of state, is proposed. For two-dimensional flows, the developed methods are based upon an approximate solver for a two-dimensional Riemann problem, according to Harten-Lax-Van Leer principles. The numerical results for standard test problems show the good behaviour of these numerical schemes for a wide range of flow conditions [fr

Laddermill-sailing. Ship propulsion by wind energy independent from the wind direction

Energy Technology Data Exchange (ETDEWEB)

Ockels, W. J.

2007-12-15

The use of large kites in ship propulsion has been getting a growing attention because of the urgent need to reduce the CO2 production and thus stop the use of fossil fuels. A novel application of ship propulsion by kites is proposed based on a Laddermill apparatus mounted on a ship. Such an apparatus consist of a winch, an electric motor/generator, a kite system (including launch and retrieval) and controlling electronics. Rather than the traditional sailing by wind force the Laddermill propulsion is achieved by a combination of the production and use of electrical power and the direct pulling force from the kite system. The feasibility of this application is investigated. It is shown that when the overall Laddermill to ship thrust efficiency can be made around 50% the resulting speed of the ship becomes practically independent from the wind direction. Such a capability could thus well change the world's seafaring.

Ionic liquid-induced aggregate formation and their applications.

Science.gov (United States)

Dutta, Rupam; Kundu, Sangita; Sarkar, Nilmoni

2018-06-01

In the last two decades, researchers have extensively studied highly stable and ordered supramolecular assembly formation using oppositely charged surfactants. Thereafter, surface-active ionic liquids (SAILs), a special class of room temperature ionic liquids (RTILs), replace the surfactants to form various supramolecular aggregates. Therefore, in the last decade, the building blocks of the supramolecular aggregates (micelle, mixed micelle, and vesicular assemblies) have changed from oppositely charged surfactant/surfactant pair to surfactant/SAIL and SAIL/SAIL pair. It is also found that various biomolecules can also interact with SAILs to construct biologically important supramolecular assemblies. The very latest addition to this combination of ion pairs is the dye molecules having a long hydrophobic chain part along with a hydrophilic ionic head group. Thus, dye/surfactant or dye/SAIL pair also produces different assemblies through electrostatic, hydrophobic, and π-π stacking interactions. Vesicles are one of the important self-assemblies which mimic cellular membranes, and thus have biological application as a drug carrier. Moreover, vesicles can act as a suitable microreactor for nanoparticle synthesis.

Study on fundamental mechanism of nuclear advanced robot. Some consideration of driving mechanism on remotely operated and submerged vehicle using the maintenance for nuclear power plant

International Nuclear Information System (INIS)

Ohki, Arahiko; Hirano, Sigeo; Oogihara, Hirotugu

1998-01-01

A propulsion system of fish was studied as a research of the driving mechanism of robot for nuclear maintenance in water. Fish sailing with higher speed than a constant value can sail by an Ostraciform type swimming method. Fish can advance by a winding actuation. The movement of fishes trunk and caudal at the stationary movement was studied in this paper. The hypothetical formulae of movement were constructed on the basis of the movements of trunk and caudal. The elements related to the driving force were analysed and evaluated. Then, a model for reproducing the movement was designed. The movement of model was tested. The theoretical formula proved that the driving forces were consisted of the force vectors in the forward direction to be generated by the phase differences of each points of trunk and caudal in their cyclic movements. (S.Y.)

The SAIL Databank: building a national architecture for e-health research and evaluation

Directory of Open Access Journals (Sweden)

Thompson Simon

2009-09-01

Full Text Available Abstract Background Vast quantities of electronic data are collected about patients and service users as they pass through health service and other public sector organisations, and these data present enormous potential for research and policy evaluation. The Health Information Research Unit (HIRU aims to realise the potential of electronically-held, person-based, routinely-collected data to conduct and support health-related studies. However, there are considerable challenges that must be addressed before such data can be used for these purposes, to ensure compliance with the legislation and guidelines generally known as Information Governance. Methods A set of objectives was identified to address the challenges and establish the Secure Anonymised Information Linkage (SAIL system in accordance with Information Governance. These were to: 1 ensure data transportation is secure; 2 operate a reliable record matching technique to enable accurate record linkage across datasets; 3 anonymise and encrypt the data to prevent re-identification of individuals; 4 apply measures to address disclosure risk in data views created for researchers; 5 ensure data access is controlled and authorised; 6 establish methods for scrutinising proposals for data utilisation and approving output; and 7 gain external verification of compliance with Information Governance. Results The SAIL databank has been established and it operates on a DB2 platform (Data Warehouse Edition on AIX running on an IBM 'P' series Supercomputer: Blue-C. The findings of an independent internal audit were favourable and concluded that the systems in place provide adequate assurance of compliance with Information Governance. This expanding databank already holds over 500 million anonymised and encrypted individual-level records from a range of sources relevant to health and well-being. This includes national datasets covering the whole of Wales (approximately 3 million population and local provider

The SAIL Databank: building a national architecture for e-health research and evaluation.

Science.gov (United States)

Ford, David V; Jones, Kerina H; Verplancke, Jean-Philippe; Lyons, Ronan A; John, Gareth; Brown, Ginevra; Brooks, Caroline J; Thompson, Simon; Bodger, Owen; Couch, Tony; Leake, Ken

2009-09-04

Vast quantities of electronic data are collected about patients and service users as they pass through health service and other public sector organisations, and these data present enormous potential for research and policy evaluation. The Health Information Research Unit (HIRU) aims to realise the potential of electronically-held, person-based, routinely-collected data to conduct and support health-related studies. However, there are considerable challenges that must be addressed before such data can be used for these purposes, to ensure compliance with the legislation and guidelines generally known as Information Governance. A set of objectives was identified to address the challenges and establish the Secure Anonymised Information Linkage (SAIL) system in accordance with Information Governance. These were to: 1) ensure data transportation is secure; 2) operate a reliable record matching technique to enable accurate record linkage across datasets; 3) anonymise and encrypt the data to prevent re-identification of individuals; 4) apply measures to address disclosure risk in data views created for researchers; 5) ensure data access is controlled and authorised; 6) establish methods for scrutinising proposals for data utilisation and approving output; and 7) gain external verification of compliance with Information Governance. The SAIL databank has been established and it operates on a DB2 platform (Data Warehouse Edition on AIX) running on an IBM 'P' series Supercomputer: Blue-C. The findings of an independent internal audit were favourable and concluded that the systems in place provide adequate assurance of compliance with Information Governance. This expanding databank already holds over 500 million anonymised and encrypted individual-level records from a range of sources relevant to health and well-being. This includes national datasets covering the whole of Wales (approximately 3 million population) and local provider-level datasets, with further growth in

The aero- and hydromechanics of keel yachts

CERN Document Server

Slooff, J W

2015-01-01

How and why does sail boat performance depend on the configuration and trim of boat and sails? This book provides the yachtsman with answers in a relatively straightforward account of the physical mechanisms of sailing. It presents an accessible overview of the fluid dynamic aspects of sailing and sailing technology, addressing both aeromechanics and hydromechanics.  Readers are provided with the basic principles of physics and general mechanics that will assist their understanding of the fluid mechanics of sailing yachts. Rich appendices cover not only in-depth, mathematical-physical treatments and derivations for those wishing to explore further, but also helpful summaries of basic mathematical notions for those wishing to refresh their knowledge.  This work explores keel yachts, specifically single-masted mono-hulls with ‘fore-and-aft’, Bermuda-rigged sails. However, much of it is applicable to other types of sailing vessels such as multi-hulls, yachts with multiple masts, windsurf boards and the li...

Construction of an infectious clone of human adenovirus type 41.

Science.gov (United States)

Chen, Duo-Ling; Dong, Liu-Xin; Li, Meng; Guo, Xiao-Juan; Wang, Min; Liu, Xin-Feng; Lu, Zhuo-Zhuang; Hung, Tao

2012-07-01

Human adenovirus type 41 (HAdV-41) is well known for its fastidiousness in cell culture. To construct an infectious clone of HAdV-41, a DNA fragment containing the left and right ends of HAdV-41 as well as a kanamycin resistance gene and a pBR322 replication origin was excised from the previously constructed plasmid pAd41-GFP. Using homologous recombination, the plasmid pKAd41 was generated by co-transformation of the E. coli BJ5183 strain with this fragment and HAdV-41 genomic DNA. Virus was rescued from pKAd41-transfected 293TE7 cells, a HAdV-41 E1B55K-expressing cell line. The genomic integrity of the rescued virus was verified by restriction analysis and sequencing. Two fibers on the virion were confirmed by western blot. Immunofluorescence showed that more expression of the hexon protein could be found in 293TE7 cells than in 293 cells after HAdV-41 infection. The feature of non-lytic replication was preserved in 293TE7 cells, since very few progeny HAdV-41 viruses were released to the culture medium. These results show that pKAd41 is an effective infectious clone and suggest that the combination of pKAd41 and 293TE7 cells is an ideal system for virological study of HAdV-41.

Construction and use of an applicator of the afterloading type for treatment of the uterine cervix

International Nuclear Information System (INIS)

Miola, U.J.; Vizeu, D.M.; Moura, A.M.S.; Petito, J.W.

The construction of an afterloading type applicator for treatment of cancer of the uterine cervix is described. The technique of intercavitary treatment of cancer of the uterine cervix used in the Osvaldo Cruz Institute of Radiotherapy (Brazil) is also discribed [pt

Impact of the Extended Learning Opportunities Summer Adventures in Learning (ELO SAIL) Program on Student Academic Performance: Part 1, Results from Fall 2012 to Fall 2015

Science.gov (United States)

Cooper-Martin, Elizabeth; Wolanin, Natalie; Jang, Seong; Modarresi, Shahpar; Zhao, Huafang

2016-01-01

Extended Learning Opportunities Summer Adventures in Learning (ELO SAIL) is a Montgomery County Public Schools summer program for students in all Title I elementary schools; it targets students who will be in kindergarten-Grade 2 in the fall following the program. This report analyzed demographic characteristics of attendees and the impact of the…

Study and construction of a new type of gaseous scintillator

International Nuclear Information System (INIS)

Khoury, H.J.

1978-01-01

The characteristics and constructional details of a new type of gas scintillation counter is presented. It is shown that using an electric field in a cylindrical geometry and operating the counter in a proportional region, the number of photons due to the excitation of rare gas (argon) during the passage of an ionising primary particle, is considerably increased. The effect of the intensity of applied eletric field is discussed and it is shown that the use of suitable electric field improves the resolution of scintillation counter. The use of several Waveshifters for shifting the ultraviolet component of photon spectrum into the sensitive region of the photomultiplier tube is discussed and the experimental results are presented. A source of Am 241 was used to verify the influence of electric field on alpha spectra. (Author) [pt

Passive-solar construction handbook

Energy Technology Data Exchange (ETDEWEB)

Levy, E.; Evans, D.; Gardstein, C.

1981-02-01

Many of the basic elements of passive solar design are reviewed. Passive solar construction is covered according to system type, each system type discussion including a general discussion of the important design and construction issues which apply to the particular system and case studies illustrating designed and built examples of the system type. The three basic types of passive solar systems discussed are direct gain, thermal storage wall, and attached sunspace. Thermal performance and construction information is presented for typical materials used in passive solar collector components, storage components, and control components. Appended are an overview of analysis methods and a technique for estimating performance. (LEW)

Radiation-Pressure Acceleration of Ion Beams from Nanofoil Targets: The Leaky Light-Sail Regime

International Nuclear Information System (INIS)

Qiao, B.; Zepf, M.; Borghesi, M.; Dromey, B.; Geissler, M.; Karmakar, A.; Gibbon, P.

2010-01-01

A new ion radiation-pressure acceleration regime, the 'leaky light sail', is proposed which uses sub-skin-depth nanometer foils irradiated by circularly polarized laser pulses. In the regime, the foil is partially transparent, continuously leaking electrons out along with the transmitted laser field. This feature can be exploited by a multispecies nanofoil configuration to stabilize the acceleration of the light ion component, supplementing the latter with an excess of electrons leaked from those associated with the heavy ions to avoid Coulomb explosion. It is shown by 2D particle-in-cell simulations that a monoenergetic proton beam with energy 18 MeV is produced by circularly polarized lasers at intensities of just 10 19 W/cm 2 . 100 MeV proton beams are obtained by increasing the intensities to 2x10 20 W/cm 2 .

Radiation-pressure acceleration of ion beams from nanofoil targets: the leaky light-sail regime.

Science.gov (United States)

Qiao, B; Zepf, M; Borghesi, M; Dromey, B; Geissler, M; Karmakar, A; Gibbon, P

2010-10-08

A new ion radiation-pressure acceleration regime, the "leaky light sail," is proposed which uses sub-skin-depth nanometer foils irradiated by circularly polarized laser pulses. In the regime, the foil is partially transparent, continuously leaking electrons out along with the transmitted laser field. This feature can be exploited by a multispecies nanofoil configuration to stabilize the acceleration of the light ion component, supplementing the latter with an excess of electrons leaked from those associated with the heavy ions to avoid Coulomb explosion. It is shown by 2D particle-in-cell simulations that a monoenergetic proton beam with energy 18 MeV is produced by circularly polarized lasers at intensities of just 10¹⁹  W/cm². 100 MeV proton beams are obtained by increasing the intensities to 2 × 10²⁰  W/cm².

Design and performance of a small shrouded Cretan windwheel

Energy Technology Data Exchange (ETDEWEB)

Fleming, P D; Probert, S D

1982-02-01

A Cretan-type windwheel is attractive because of its design simplicity, low cost, durability and ease of construction by semi-skilled labor from a variety of indigenous materials. Test data for a shrouded version of the ''cycle wheel'', Cretan system are presented. The use of nine loosely sheeted sails produced a maximum power output of 14 W for an air speed at entry to the rotor of 5 m s/sup -1/, corresponding to a free stream wind of less than 3.5ms/sup -1/. For this system it was found that tight (rather than loose) sails harnessed relatively little power. The presence of the shroud, which reduced tip losses, led to higher power coefficients being attainable. Two possible applications for a larger version (than tested) shrouded, Cretan type windwheel are described, namely for irrigation and land drainage in undeveloped countries and for stimulating a peristaltic pump which acts as a gravitational boost to drive solar-heated anti-freeze liquid around a low height, domestic central-heating circuit. 22 refs.

Structure of the putative 32 kDa myrosinase-binding protein from Arabidopsis (At3g16450.1) determined by SAIL-NMR.

Science.gov (United States)

Takeda, Mitsuhiro; Sugimori, Nozomi; Torizawa, Takuya; Terauchi, Tsutomu; Ono, Akira M; Yagi, Hirokazu; Yamaguchi, Yoshiki; Kato, Koichi; Ikeya, Teppei; Jee, Jungoo; Güntert, Peter; Aceti, David J; Markley, John L; Kainosho, Masatsune

2008-12-01

The product of gene At3g16450.1 from Arabidopsis thaliana is a 32 kDa, 299-residue protein classified as resembling a myrosinase-binding protein (MyroBP). MyroBPs are found in plants as part of a complex with the glucosinolate-degrading enzyme myrosinase, and are suspected to play a role in myrosinase-dependent defense against pathogens. Many MyroBPs and MyroBP-related proteins are composed of repeated homologous sequences with unknown structure. We report here the three-dimensional structure of the At3g16450.1 protein from Arabidopsis, which consists of two tandem repeats. Because the size of the protein is larger than that amenable to high-throughput analysis by uniform (13)C/(15)N labeling methods, we used stereo-array isotope labeling (SAIL) technology to prepare an optimally (2)H/(13)C/(15)N-labeled sample. NMR data sets collected using the SAIL protein enabled us to assign (1)H, (13)C and (15)N chemical shifts to 95.5% of all atoms, even at a low concentration (0.2 mm) of protein product. We collected additional NOESY data and determined the three-dimensional structure using the cyana software package. The structure, the first for a MyroBP family member, revealed that the At3g16450.1 protein consists of two independent but similar lectin-fold domains, each composed of three beta-sheets.

Journal of The Society of Naval Architects of Japan. Vol. 181; Nihon Zosen Gakkai Ronbunshu. 181

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-06-01

A total of 40 papers presented to the society`s springtime symposium held in May 1997 are collected. Some of the major topics are for sailing boats, including sail force by full scale measurement and numerical simulation, design method for sailing boats by CFD performance simulation, and CFD simulation of two-sail interaction about a sailing yacht; for large floating structures, including numerical response analysis of a large mat-type floating structures in regular waves, an assessment of a mega-float on water quality and ecosystem in Tokyo Bay, and structural analyses of very large semi-submersibles in waves; for basic calculation methods, including integrated Green`s function method for 3-dimensional unsteady flow field around an advancing ship, and the characteristic analysis of turbulent diffusion on the functional design of marine systems; and others, including development of a small cruising-type AUV and training of constant altitude swimming, development of the hull inspection robot, and a consideration on the elastic response and design of deepwater riser

Construction of a class of Daubechies type wavelet bases

International Nuclear Information System (INIS)

Li Dengfeng; Wu Guochang

2009-01-01

Extensive work has been done in the theory and the construction of compactly supported orthonormal wavelet bases of L 2 (R). Some of the most distinguished work was done by Daubechies, who constructed a whole family of such wavelet bases. In this paper, we construct a class of orthonormal wavelet bases by using the principle of Daubechies, and investigate the length of support and the regularity of these wavelet bases.

Use of CYPRES™ cutters with a Kevlar clamp band for hold-down and release of the Icarus De-Orbit Sail payload on TechDemoSat-1

Science.gov (United States)

Kingston, J.; Hobbs, S.; Roberts, P.; Juanes-Vallejo, C.; Robinson, F.; Sewell, R.; Snapir, B.; Llop, J. Virgili; Patel, M.

2014-07-01

TechDemoSat-1 is a UK-funded technology demonstration satellite, carrying 8 payloads provided by UK organisations, which is due to be launched in the first quarter of 2014. Cranfield University has supplied a De-Orbit Sail (DOS) payload to allow the mission to comply with end-of-life debris mitigation guidelines. The payload provides a passive, simple, and low-cost means of mitigating debris proliferation in Low Earth Orbit, by enhancing spacecraft aerodynamic drag at end-of-life and reducing time to natural orbital decay and re-entry. This paper describes the use of small commercial electro-explosive devices (EEDs), produced for use as parachute tether-cutters in reserve chute deployment systems, as low-cost but high-reliability release mechanisms for space applications. A testing campaign, including thermal vacuum and mechanical vibration, is described, which demonstrates the suitability of these CYPRES™ cutters, with a flexible Kevlar clamp band, for use as a hold-down and release mechanism (HDRM) for a deployable de-orbit sail. The HDRM is designed to be three-failure-tolerant, highly reliable, yet simple and low-cost.

Three year review

Energy Technology Data Exchange (ETDEWEB)

1980-01-01

Since 1977 research and development activities include various biotechnology systems: algal systems, microbial systems, water hyacinth utilization systems, pisciculture biogas systems; food, fodder and forestry systems (including algal systems), cattle feeding with water hyacinth, biodynamic-intensive vegetable gardening, hydroponic raft culture in stagnant water, small-lot energy-food forestry, and energy plantations; wind and solar energy systems including a bidirectional horizontal-axis down-wind sail-wing windmill, a horizontal-axis down-wind sail-wing windmill, solar crop and fish dryers, solar cookers and water sterilizers; appropriate-construction systems including pond-construction systems, passive solar-building techniques and pond roofing; and communication systems.

Physical activity, sleep pattern and energy expenditure in double-handed offshore sailing.

Science.gov (United States)

Galvani, C; Ardigò, L P; Alberti, M; Daniele, F; Capelli, C

2015-12-01

The aim of the present study was to quantify total energy expenditure, activity energy expenditure and time spent at three levels of physical activity (low, moderate, high intensity) in four two-person crews during a 500-mile double-handed sailing regatta. Physical activity intensity and energy expenditure were assessed during a 500-nautical-mile double-handed offshore competition in eight male sailors (46.3±3.4 years; 180±13 cm; 85.4±12.5 kg). During the whole regatta, they wore an activity monitor that estimated energy expenditure and minutes spent at each level of intensity (sedentary, 6.0 METs). The sailors spent longer periods (Penergy expenditure was 14.26±1.89 MJ/day and the activity energy expenditure was 5.06±1.42 MJ/day. Activity energy expenditure was significantly correlated with total sleep time, boat speed, and distance covered each day (Penergy expenditure was more likely a consequence of the short and rare periods of sleep during the competition rather than of the bouts of moderate and vigorous physical activities.

46 CFR 151.15-3 - Construction.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Construction. 151.15-3 Section 151.15-3 Shipping COAST... LIQUID HAZARDOUS MATERIAL CARGOES Tanks § 151.15-3 Construction. This section lists the requirements for construction of the types of cargo tanks defined in § 151.15-1. (a) Gravity type tanks. Gravity type cargo...

Tribute to Dr Jacques Rogge

DEFF Research Database (Denmark)

Bourgois, Jan G; Dumortier, Jasmien; Callewaert, Margot

2017-01-01

'A tribute to Dr J. Rogge' aims to systematically review muscle activity and muscle fatigue during sustained submaximal quasi-isometric knee extension exercise (hiking) related to Olympic dinghy sailing as a tribute to Dr Rogge's merits in the world of sports. Dr Jacques Rogge is not only...... of invasive needle electromyography (EMG) during a specific sailing technique (hiking) on a self-constructed sailing ergometer. Hiking is a bilateral and multi-joint submaximal quasi-isometric movement which dinghy sailors use to optimize boat speed and to prevent the boat from capsizing. Large stresses...... are generated in the anterior muscles that cross the knee and hip joint, mainly employing the quadriceps at an intensity of 30-40% maximal voluntary contraction (MVC), sometimes exceeding 100% MVC. Better sailing level is partially determined by a lower rate of neuromuscular fatigue during hiking and for ≈60...

Anchorage of equipment - requirements and verification methods with emphasis on equipment of existing and constructed VVER-type nuclear power plants

International Nuclear Information System (INIS)

Masopust, R.

1999-01-01

Criteria and verification methods which are recommended for use in the capacity evaluation of anchorage of safety-related equipment at WWER-type nuclear power plants are presented. Developed in compliance with the relevant basic standards documents specifically for anchorage of WWER-type equipment components, the criteria and methods cover different types of anchor bolts and other anchorage elements which are typical of existing, constructed, or reconstructed WWER-type nuclear power plants

Passive solar construction handbook

Energy Technology Data Exchange (ETDEWEB)

Levy, E.; Evans, D.; Gardstein, C.

1981-08-01

Many of the basic elements of passive solar design are reviewed. The unique design constraints presented in passive homes are introduced and many of the salient issues influencing design decisions are described briefly. Passive solar construction is described for each passive system type: direct gain, thermal storage wall, attached sunspace, thermal storage roof, and convective loop. For each system type, important design and construction issues are discussed and case studies illustrating designed and built examples of the system type are presented. Construction details are given and construction and thermal performance information is given for the materials used in collector components, storage components, and control components. Included are glazing materials, framing systems, caulking and sealants, concrete masonry, concrete, brick, shading, reflectors, and insulators. The Load Collector Ratio method for estimating passive system performance is appended, and other analysis methods are briefly summarized. (LEW)

Structure of the Putative 32 kDa Myrosinase Binding Protein from Arabidopsis (At3g16450.1) Determined by SAIL-NMR

Science.gov (United States)

Takeda, Mitsuhiro; Sugimori, Nozomi; Torizawa, Takuya; Terauchi, Tsutomu; Ono, Akira Mei; Yagi, Hirokazu; Yamaguchi, Yoshiki; Kato, Koichi; Ikeya, Teppei; Jee, JunGoo; Güntert, Peter; Aceti, David J.; Markley, John L.; Kainosho, Masatsune

2009-01-01

The product of gene At3g16450.1 from Arabidopsis thaliana is a 32 kDa, 299-residue protein classified as resembling a myrosinase-binding protein (MyroBP). MyroBPs are found in plants as part of a complex with the glucosinolate-degrading enzyme, myrosinase, and are suspected to play a role in myrosinase-dependent defense against pathogens. Many MyroBPs and MyroBP-related proteins are composed of repeated homologous sequences with unknown structure. We report here the three-dimensional structure of the At3g16450.1 protein from Arabidopsis, which consists of two tandem repeats. Because the size of the protein is larger than that amenable to high-throughput analysis by uniformly 13C/15N labeling methods, we used our stereo-array isotope labeling (SAIL) technology to prepare an optimally 2H/13C/15N-labeled sample. NMR data sets collected with the SAIL-protein enabled us to assign 1H, 13C and 15N chemical shifts to 95.5% of all atoms, even at the low concentration (0.2 mM) of the protein product. We collected additional NOESY data and solved the three-dimensional structure with the CYANA software package. The structure, the first for a MyroBP family member, revealed that the At3g16450.1 protein consists of two independent, but similar, lectin-fold domains composed of three β-sheets. PMID:19021763

Weather Support for the 2008 Olympic and Paralympic Sailing Events

Directory of Open Access Journals (Sweden)

Yan Ma

2013-01-01

Full Text Available The Beijing 2008 Olympic and Paralympic Sailing Competitions (referred to as OPSC hereafter were held at Qingdao during August 9–23 and September 7–13 2008, respectively. The Qingdao Meteorological Bureau was the official provider of weather support for the OPSC. Three-dimensional real-time information with high spatial-temporal resolution was obtained by the comprehensive observation system during the OPSC, which included weather radars, wind profile radars, buoys, automated weather stations, and other conventional observations. The refined forecasting system based on MM5, WRF, and statistical modules provided point-specific hourly wind forecasts for the five venues, and the severe weather monitoring and forecasting system was used in short-term forecasts and nowcasts for rainstorms, gales, and hailstones. Moreover, latest forecasting products, warnings, and weather information were communicated conveniently and timely through a synthetic, speedy, and digitalized network system to different customers. Daily weather information briefings, notice boards, websites, and community short messages were the main approaches for regatta organizers, athletes, and coaches to receive weather service products at 8:00 PM of each day and whenever new updates were available. During the period of OPSC, almost one hundred people were involved in the weather service with innovative service concept, and the weather support was found to be successful and helpful to the OPSC.

Experimental studies of Steel Corrugated Constructions

Directory of Open Access Journals (Sweden)

Lazarev Yuriy

2016-01-01

Full Text Available The purpose of this particular article is to assess existing calculations of steel corrugated constructions. Steel Corrugated Construction is a perspective type of constructions, which is exhibiting numerous advantages in comparison with one that currently applied in automobile and railroad networks (reinforced concrete water-throughput pipes, reinforced concrete frame bridges. The evaluation of experimental data on models of constructions of this particular type has been carried out in order to improve calculations of Steel Corrugated Constructions.

Spatial and seasonal distribution of American whaling and whales in the age of sail.

Science.gov (United States)

Smith, Tim D; Reeves, Randall R; Josephson, Elizabeth A; Lund, Judith N

2012-01-01

American whalemen sailed out of ports on the east coast of the United States and in California from the 18(th) to early 20(th) centuries, searching for whales throughout the world's oceans. From an initial focus on sperm whales (Physeter macrocephalus) and right whales (Eubalaena spp.), the array of targeted whales expanded to include bowhead whales (Balaena mysticetus), humpback whales (Megaptera novaeangliae), and gray whales (Eschrichtius robustus). Extensive records of American whaling in the form of daily entries in whaling voyage logbooks contain a great deal of information about where and when the whalemen found whales. We plotted daily locations where the several species of whales were observed, both those caught and those sighted but not caught, on world maps to illustrate the spatial and temporal distribution of both American whaling activity and the whales. The patterns shown on the maps provide the basis for various inferences concerning the historical distribution of the target whales prior to and during this episode of global whaling.

Construction Claim Types and Causes for a Large-Scale Hydropower Project in Bhutan

Directory of Open Access Journals (Sweden)

Bonaventura H.W. Hadikusumo

2015-01-01

Full Text Available Hydropower construction projects are complex and uncertain, have long gestational periods and involve several parties. Furthermore, they require the integration of different components (Civil, Mechanical and Electrical to work together as a single unit. These projects require highly specialised designs, detailed plans and specifications, high-risk construction methods, effective management, skilful supervision and close coordination. Thus, claims are common in such projects. These claims are undesirable because they require significant time and resources to resolve and cause adversarial relationships among the parties involved. Therefore, it is in the common interest of all involved parties to prevent, minimise, or resolve claims as amicably as possible. Identifying common claim types and their causes is essential in devising techniques to minimise and avoid them in future projects. This report details a case study performed on a large-scale hydropower project in Bhutan. The findings of this case study indicate that differing site conditions are the major contributor of impact and change claims and 95% of total claims can be settled by negotiation, whereas 5% of claims can be settled by arbitration.

Sailing a safe ship: improving patient safety by enhancing the leadership skills of new consultant specialist surgeons.

Science.gov (United States)

Shah, Peter; Cross, Vinette; Sii, Freda

2013-01-01

The potential for "discontinuities in care" arising from the turbulent transition from specialist trainee to consultant specialist presents risks to patient safety. But it is easy to lose sight of the affective needs of individuals facing the burden of keeping patients safe. This article describes a 2-day program focused on new and prospective consultant specialist ophthalmic surgeons entitled "Sailing a Safe Ship" (SASS). The purpose was to facilitate understanding and analysis of their personal holistic learning needs and enhance individual agency in optimizing learning during the transition period. The program used gaming, team challenges, meta-planning, role play and professional actors, interactive presentations, and self-analysis tools to portray the real world of consultant specialist practice in terms of ill-defined problems requiring "elite communication" and effective negotiation of value differences and priorities for their resolution. Participants' insights into their individual learning were recorded in scheduled reflective sessions. The immediate impact on their learning was also considered in terms of direct (instructional) and indirect (nurturant) effects. Participants' insights reflected 4 key themes: admitting vulnerability and uncertainty, taking responsibility for managing risk, being self-aware and reflexive, and internalizing authentic leadership. Four instructional and 4 nurturant effects were revealed. Preliminary findings on long-term impact on participants' practice are outlined. Evidence from the evaluation indicated that participants felt empowered to construct a personal strategic response to unfamiliar and unanticipated workplace demands and pressures, adopt a capability mindset that would accelerate their capacity to fulfill an enhanced leadership role, and take a holistic approach to their continuing self-directed development as leaders and educators. Copyright © 2013 The Alliance for Continuing Education in the Health Professions

A Light Sail Inspired Model to Harness Casimir Forces for Propellantless Propulsion

International Nuclear Information System (INIS)

DeBiase, R. L.

2010-01-01

The model used to calculate Casimir forces for variously shaped conducting plates in this paper assumes the vacuum energy pervades all space and that photons randomly pop into and out of existence. While they exist, they possess energy and momentum that can be transferred by reflection as in a light sail. Quantum mechanics in the model is entirely bound up in the Casimir equation of force per unit area. This model is compared with two different experiments: that of Chen and Mohideen demonstrating lateral Casimir forces for sinusoidally corrugated spherical and flat plates and Lamoreaux demonstrating normal Casimir forces between a conducting sphere and flat plate. The calculated forces using this model were compared to the forces obtained in these experiments as well as with calculations using the proximity force approximation. In both cases the results (when compared to the actual plates measured and calculated using non-corrected equations) were less than a few parts per thousand different for the range of separation distances used. When the model was used to calculate forces on the opposite plates, different force magnitudes were obtained seemingly indicating prospects for propellentless propulsion but requiring skeptical verification.

Construction technique for a chemical plant (II)

International Nuclear Information System (INIS)

1978-08-01

This book deals with design and construction for a chemical plant which includes design and building of steel structure for a chemical plant with types, basic regulation, plan, shop fabrication for steel structure and field construction. It explains design and construction of making building for a chemical construction with measurement, types of building and basic rule of the building, design of the building, constructing plumbing for a chemical plant with plan, management of material, checking for construction, construction of electrical installation on plan, know-how to construction and maintenance.

Superstring construction

CERN Document Server

1989-01-01

The book includes a selection of papers on the construction of superstring theories, mainly written during the years 1984-1987. It covers ten-dimensional supersymmetric and non-supersymmetric strings, four-dimensional heterotic strings and four-dimensional type-II strings. An introduction to more recent developments in conformal field theory in relation to string construction is provided.

Research on construction quality and improvement of assembly construction

Science.gov (United States)

Cheng, Fei

2017-11-01

Based on the acceleration of the urbanization process and the improvement of the quality of life of our residents, the demand for building construction has been increasing. In this context, the construction industry in order to promote the construction efficiency, quality improvement, to meet the needs of the development of the times to strengthen the new technology, the use of new technologies. At present, China’s engineering construction units in the process of carrying out the project to strengthen the use of assembly-type construction technology, which thus achieved for the traditional construction work low-level, high time-consuming issues, and promote the steady improvement of production efficiency. Based on this, this paper focuses on the analysis of the connotation of the assembly structure and analyzes the quality problems in the construction process of the construction projects and puts forward the improvement measures to promote the improvement of the building quality and the construction of the building Construction speed. Based on this, this paper analyzes the structural system and design of prefabricated building.

Rational construction of an ssa-type of MOF through pre-organizing the ligand's conformation and its exceptional gas adsorption properties.

Science.gov (United States)

Wang, Yao; He, Minghui; Tian, Zhi; Zhong, Haoyan; Zhu, Lisha; Zhang, Yingying; Zhang, Xiaoping; Chen, De-Li; He, Yabing

2018-02-13

Ssa-type MOFs constructed from dicopper paddlewheels and bent diisophthalate ligands exhibit a promising potential for gas adsorption which benefits from their rich open copper sites and polyhedron-based cages with suitable sizes. However, the rational construction of such types of MOFs is exceedingly challenging because the bent diisophthalate ligands employed are inclined to exhibit various conformations and thus are prone to form MOFs with varied topologies. In this work, by pre-organizing the ligand's conformation, we successfully targeted an ssa-type MOF ZJNU-57 from a bent diisophthalate ligand. More significantly, ZJNU-57 exhibits excellent hydrolytic stability and high C 2 H 2 and CO 2 uptake capacities as well as impressive C 2 H 2 /CH 4 and CO 2 /CH 4 adsorption selectivities, indicating its promising potential for C 2 H 2 /CH 4 and CO 2 /CH 4 separation, which are relevant to acetylene production and natural gas purification. This work not only provides a rare water-stable MOF based on the Cu 2 (COO) 4 cluster for highly selective adsorption of C 2 H 2 and CO 2 from CH 4 , but also demonstrates that the ligand conformation-controlled assembly strategy may be an efficient approach toward the construction of MOF materials with definite topologies for specific applications.

Construction and Analysis of Functional Networks in the Gut Microbiome of Type 2 Diabetes Patients.

Science.gov (United States)

Li, Lianshuo; Wang, Zicheng; He, Peng; Ma, Shining; Du, Jie; Jiang, Rui

2016-10-01

Although networks of microbial species have been widely used in the analysis of 16S rRNA sequencing data of a microbiome, the construction and analysis of a complete microbial gene network are in general problematic because of the large number of microbial genes in metagenomics studies. To overcome this limitation, we propose to map microbial genes to functional units, including KEGG orthologous groups and the evolutionary genealogy of genes: Non-supervised Orthologous Groups (eggNOG) orthologous groups, to enable the construction and analysis of a microbial functional network. We devised two statistical methods to infer pairwise relationships between microbial functional units based on a deep sequencing dataset of gut microbiome from type 2 diabetes (T2D) patients as well as healthy controls. Networks containing such functional units and their significant interactions were constructed subsequently. We conducted a variety of analyses of global properties, local properties, and functional modules in the resulting functional networks. Our data indicate that besides the observations consistent with the current knowledge, this study provides novel biological insights into the gut microbiome associated with T2D. Copyright © 2016. Production and hosting by Elsevier Ltd.

Design of combination biofilter and subsurface constructed wetland-multilayer filtration with vertical flow type using Vetiveria zizanioides (akar wangi)

Science.gov (United States)

Astuti, A. D.; Lindu, M.; Yanidar, R.; Faruq, M.

2018-01-01

As environmental regulation has become stricter in recent years, there is an increasing concern about the issue of wastewater treatment in urban areas. Senior High School as center of student activity has a potential source to generated domestic wastewater from toilet, bathroom and canteen. Canteen wastewater contains high-organic content that to be treated before discharged. Based on previous research the subsurface constructed wetland-multilayer filtration with vertical flow is an attractive alternative to provide efficient treatment of canteen wastewater. The effluent concentration complied with regulation according to [9]. Due to limited land, addition of preliminary treatment such as the presence of biofilter was found to improve the performance. The aim of this study was to design combination biofilter and subsurface constructed wetland-multilayer filtration with vertical flow type using vetiveria zizanioides (akar wangi) treating canteen wastewater. Vetiveria zizanioides (akar wangi) is used because from previous research, subsurface constructed wetland-multilayer filtration (SCW-MLF) with vertical flow type using vetiveria zizanioides (akar wangi) can be an alternative canteen wastewater treatment that is uncomplicated in technology, low cost in operational and have a beautiful landscape view, besides no odors or insects were presented during the operation.

In-Situ Sampling Analysis of a Jupiter Trojan Asteroid by High Resolution Mass Spectrometry in the Solar Power Sail Mission

Science.gov (United States)

Kebukawa, Y.; Aoki, J.; Ito, M.; Kawai, Y.; Okada, T.; Matsumoto, J.; Yano, H.; Yurimoto, H.; Terada, K.; Toyoda, M.; Yabuta, H.; Nakamura, R.; Cottin, H.; Grand, N.; Mori, O.

2017-12-01

The Solar Power Sail (SPS) mission is one of candidates for the upcoming strategic middle-class space exploration to demonstrate the first outer Solar System journey of Japan. The mission concept includes in-situ sampling analysis of the surface and subsurface (up to 1 m) materials of a Jupiter Trojan asteroid using high resolution mass spectrometry (HRMS). The candidates for the HRMS are multi-turn time-of-flight mass spectrometer (MULTUM) type and Cosmorbitrap type. We plan to analyze isotopic and elemental compositions of volatile materials from organic matter, hydrated minerals, and ice (if any), in order to understand origin and evolution of the Jupiter Trojan asteroids. It will provide insights into planet formation/migration theories, evolution and distribution of volatiles in the Solar System, and missing link between asteroids and comets on evolutional. The HRMS system allows to measure H, N, C, O isotopic compositions and elemental compositions of molecules prepared by various pre-MS procedures including stepwise heating up to 600ºC, gas chromatography (GC), and high-temperature pyrolysis with catalyst to decompose the samples into simple gaseous molecules (e.g., H2, CO, and N2) for isotopic ratio analysis. The required mass resolution should be at least 30,000 for analyzing isotopic ratios for simple gaseous molecules. For elemental compositions, mass accuracy of 10 ppm is required to determine elemental compositions for molecules with m/z up to 300 (as well as compound specific isotopic compositions for smaller molecules). Our planned analytical sequences consist of three runs for both surface and subsurface samples. In addition, `sniff mode' which simply introduces environmental gaseous molecules into a HRMS will be done by the system.

Hydrodynamic manoeuvrability data of a flatfish type AUV

DEFF Research Database (Denmark)

Aage, Christian; Wagner Smitt, Leif

1994-01-01

Hydrodynamic manoeuvrability data of the flatfish type autonomous underwater vehicle (AUV) “MARIUS” are presented. “MARIUS” was developed under the EC MAST Programme as a vehicle for seabed inspection and environmental surveys in coastal waters. The AUV has an overall length of 4.5 m and is driven...... by two propellers and four thrusters. The data comprise added mass and inertia coefficients, damping, lift and drag coefficients of the vehicle and its control surfaces, as well as resistance and propulsion characteristics. The hydrodynamic data have been determined by full scale tests, using a towing...... tank equipped with a planar motion mechanism. A few free-sailing tests have been carried out as well. Application of the data and possible improvements of the shape of the vehicle are discussed...

Statistical Study of Corrosion Types in Constructions in South Region of Rio De Janeiro – Brazil

Directory of Open Access Journals (Sweden)

Carolina Lacerda da Cruz

2016-05-01

Full Text Available Some of the most difficult and troubling problems encountered in construction are those caused by corrosive processes. The corrosion processes are constituted by some material degradation, generally metallic material, by means of chemical or electrochemical actions of environment in which the material are and can or cannot be combined with mechanical stress. Corrosion is present in the materials in general. Their deterioration is caused by such physical-chemical interaction between the material and the corrosive environment where it causes major problems in several activities. In order to prevent material losses, anticorrosive techniques are used which include coatings, medium modification techniques, anodic and cathodic protection, and corrosion inhibitors such as the organic compounds use. This article analyses the statistical study of corrosion types in construction in south region of Rio de Janeiro, Brazil.

Windmills and wind motors how to build and run them

CERN Document Server

Powell, F E

2011-01-01

Free, clean, and sustainable energy: wind power is an essential resource everyone can harness. This comprehensive and compact historical work provides everything you need to learn about the theory and construction of everyday windmills, from small ones intended solely as models to those large enough to generate electricity. Powell provides all the necessities to get you on your way, including detailed, step-by-step instructions, illustrations, and designs for every part of the project.Types of windmill projects include:A model windmill with sails two feet acrossA

Sedimentary record of the obduction of the Samail ophiolite in northern Oman: the Muti Formation in the Sail Hatat window

Science.gov (United States)

Ducassou, Céline; Robin, Cecile; Poujol, Marc; Al-Rahbi, Basim; Estournes, Guilhem

2016-04-01

The obduction of the Samail Ophiolite in Oman took place during the Upper Cretaceous. Since then, the northern part of Oman has been relatively preserved from deformation and is therefore one of the best places to study obduction processes. In addition, radiometric data provide good constraints on the timing of obduction from the formation of the metamorphic sole until the exhumation of the high-pressure / low-temperature metamorphic rocks involved in the subduction zone below the oceanic lithosphere. However, the response of the continental margin during the obduction is still poorly constrained. If most of the models suggest the development of a flexural basin and an associated forebulge such as in continental collision, their recognition within the syn-tectonic deposits led to different interpretations. The geometry of the youngest syn-tectonic deposits (Fiqa Formation) is relatively well constrained by sub-surface data that suggest a southward migration of the depocenter and progressive onlaps on the southern margin of the basin. The context of sedimentation of the oldest syn-tectonic deposits (Muti Formation) preserved below the nappes in the Oman Mountains is, however, still poorly understood. The location of the sedimentation area with respect of the forebulge, for instance, remains unclear. In order to acquire better constraints on the record, on the Arabian platform, of first steps of the obduction, the analysis of several sections of the Muti Formation has been performed. We present here our main results for the north-eastern part of the Oman Mountains, in the Sail Hatat window, where the thickest successions have been described in Quryat and Bidbid area, respectively located in the eastern and western part of the Sail Hatat window. Sedimentological and structural analysis have been combined to reconstitute the evolution of depositional environments in areas strongly affected by deformation. In addition, systematic measurements and restoration of

Library construction and biological evaluation of enmein-type diterpenoid analogues as potential anticancer agents.

Science.gov (United States)

Li, Dahong; Xu, Shengtao; Cai, Hao; Pei, Lingling; Wang, Lei; Wu, Xiaoming; Yao, Hequan; Jiang, Jieyun; Sun, Yijun; Xu, Jinyi

2013-05-01

A library of promising enmein-type 14-O-diterpenoid derivatives was constructed from a commercially available kaurene-type oridonin by practical and efficient synthetic methods. These synthetic derivatives were evaluated for their antiproliferative activities against a set of four human cancer cell lines. The IC50 values are similar to or improved over those of the parent molecule and paclitaxel, the latter of which was used as a positive control. Compound 29 was further investigated for its apoptotic properties against human hepatocarcinoma Bel-7402 cells to better understand its mode of action. Moreover, compound 29 was shown to have potent antitumor activity in vivo in studies with a murine model of gastric cancer (MGC-803 mice). These results warrant further preclinical investigations of these diterpenoid-based analogues as potential novel anticancer chemotherapeutics. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Sustained Aeration of Infant Lungs (SAIL) trial: study protocol for a randomized controlled trial.

Science.gov (United States)

Foglia, Elizabeth E; Owen, Louise S; Thio, Marta; Ratcliffe, Sarah J; Lista, Gianluca; Te Pas, Arjan; Hummler, Helmut; Nadkarni, Vinay; Ades, Anne; Posencheg, Michael; Keszler, Martin; Davis, Peter; Kirpalani, Haresh

2015-03-15

Extremely preterm infants require assistance recruiting the lung to establish a functional residual capacity after birth. Sustained inflation (SI) combined with positive end expiratory pressure (PEEP) may be a superior method of aerating the lung compared with intermittent positive pressure ventilation (IPPV) with PEEP in extremely preterm infants. The Sustained Aeration of Infant Lungs (SAIL) trial was designed to study this question. This multisite prospective randomized controlled unblinded trial will recruit 600 infants of 23 to 26 weeks gestational age who require respiratory support at birth. Infants in both arms will be treated with PEEP 5 to 7 cm H2O throughout the resuscitation. The study intervention consists of performing an initial SI (20 cm H20 for 15 seconds) followed by a second SI (25 cm H2O for 15 seconds), and then PEEP with or without IPPV, as needed. The control group will be treated with initial IPPV with PEEP. The primary outcome is the combined endpoint of bronchopulmonary dysplasia or death at 36 weeks post-menstrual age. www.clinicaltrials.gov , Trial identifier NCT02139800 , Registered 13 May 2014.

Spatial and seasonal distribution of American whaling and whales in the age of sail.

Directory of Open Access Journals (Sweden)

Tim D Smith

Full Text Available American whalemen sailed out of ports on the east coast of the United States and in California from the 18(th to early 20(th centuries, searching for whales throughout the world's oceans. From an initial focus on sperm whales (Physeter macrocephalus and right whales (Eubalaena spp., the array of targeted whales expanded to include bowhead whales (Balaena mysticetus, humpback whales (Megaptera novaeangliae, and gray whales (Eschrichtius robustus. Extensive records of American whaling in the form of daily entries in whaling voyage logbooks contain a great deal of information about where and when the whalemen found whales. We plotted daily locations where the several species of whales were observed, both those caught and those sighted but not caught, on world maps to illustrate the spatial and temporal distribution of both American whaling activity and the whales. The patterns shown on the maps provide the basis for various inferences concerning the historical distribution of the target whales prior to and during this episode of global whaling.

[Efficacy of dolutegravir in treatment-experienced patients: the SAILING and VIKING trials].

Science.gov (United States)

Moreno, Santiago; Berenguer, Juan

2015-03-01

Dolutegravir is an HIV integrase inhibitor with a high genetic barrier to resistance and is active against raltegravir- and/or elvitegravir-resistant strains. The clinical development of dolutegravir for HIV infection rescue therapy is based on 3 clinical trials. In the SAILING trial, dolutegravir (5 mg once daily) in combination with 2 other antiretroviral agents was well tolerated and showed greater virological effect than raltegravir (400 mg twice daily) in the treatment of integrase inhibitor-naïve adults with virological failure infected with HIV strains with at least two-class drug resistance. The VIKING studies were designed to evaluate the efficacy of dolutegravir as rescue therapy in treatment-experienced patients infected with HIV strains with resistance mutations to raltegravir and/or elvitegravir. VIKING-1-2 was a dose-ranging phase IIb trial. VIKING-3 was a phase III trial in which dolutegravir (50 mg twice daily) formed part of an optimized regimen and proved safe and effective in this difficult-to-treat group of patients. Dolutegravir is the integrase inhibitor of choice for rescue therapy in multiresistant HIV infection, both in integrase inhibitor-naïve patients and in those previously treated with raltegravir or elvitegravir. Copyright © 2015 Elsevier España, S.L.U. All rights reserved.

CONSTRUCTION SENSITIVITY IN PINGYAO TONE SANDHI

Directory of Open Access Journals (Sweden)

Hui-shan Lin

2012-06-01

Full Text Available This paper investigates tone sandhi phenomena in Pingyao, a Jin dialect spoken in Shanxi province in China. Pingyao tone sandhi is special in that tone sandhi in bi-syllabic strings is construction sensitive, but tone sandhi in tri-syllabic strings is not fully conditioned by construction types. Based on Optimality Theory (OT, this paper proposes analyses for bi-tonal and tri-tonal sandhi in Pingyao. We show that while bi-tonal sandhi can be accounted for by assuming that there are different grammars associated with different construction types, the lack of construction sensitivity in certain tri-syllabic strings suggests that the association between construction types and phonological grammars can be sacrificed to comply with a higher demand. In Pingyao, the higher demand is to avoid having a tri-tonal string with marked tone sandhi domain from being associated with conflicting grammars.

Ship construction and welding

CERN Document Server

Mandal, Nisith R

2017-01-01

This book addresses various aspects of ship construction, from ship types and construction materials, to welding technologies and accuracy control. The contents of the book are logically organized and divided into twenty-one chapters. The book covers structural arrangement with longitudinal and transverse framing systems based on the service load, and explains basic structural elements like hatch side girders, hatch end beams, stringers, etc. along with structural subassemblies like floors, bulkheads, inner bottom, decks and shells. It presents in detail double bottom construction, wing tanks & duct keels, fore & aft end structures, etc., together with necessary illustrations. The midship sections of various ship types are introduced, together with structural continuity and alignment in ship structures. With regard to construction materials, the book discusses steel, aluminum alloys and fiber reinforced composites. Various methods of steel material preparation are discussed, and plate cutting and form...

46 CFR 169.311 - Fire protection.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Fire protection. 169.311 Section 169.311 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Construction and Arrangement Hull Structure § 169.311 Fire protection. (a) The general construction of the vessel...

Foregrounding awareness of sentence construction-types in the ...

African Journals Online (AJOL)

... a grasp of the principles of phrase and sentence formation and the kinds of structure ... In this article, I have demonstrated through the content analysis of the ... within sentences whose construction typifies the desirative and instrumental ...

Zdrowie Psychiczne w żegludze transoceanicznej = Mental Health in transoceanic sailing

Directory of Open Access Journals (Sweden)

Mariusz Julian Czarnecki

2016-07-01

stresem w badanej grupie, oraz świadomość zachowania prozdrowotnego mającego wpływ na potencjał zdrowia. Wnioski Osoby pełniące funkcję Kapitana na rejsach oceanicznych, wykazały się znajomością własnych stresorów towarzyszących podczas żeglugi. Dodatkowo wykazały się działaniami prowadzącymi do zachowania potencjału zdrowotnego. Osoby badane nie wykazały reakcji antyzdrowotnych i tendencji prowadzących do wystąpienia skutków powodowanych przez dystres.   Słowa kluczowe: zdrowie psychiczne, stres, potencjał zdrowotny, żeglarstwo.         Abstract   Introduction The awareness of the stressors and how to cope with stressful situations has an impact on the health of people who practice the professions associated with a great responsibility for the health and lives of others, such as, medical consultants, nurses and firefighters. Practising the profession of yacht captain is associated with responsibility for the crew and a sailing vessel in various conditions, and therefore is inseparably linked with the occurrence of stressful situations. To the best of our knowledge, so far, little studies, in terms of stress, were conducted on captains, taking long cruises, such as transoceanic sailing,. Materials and methods In the presented work, 5 captains were studied. The qualitative research, with the use of an expert narrative interview, was used. The open-depth interviews with selected group of captains were performed, with a particular attention to the, indicated by responders, stressors occurring during transoceanic sailing. In addition, the level of perception and coping with stress in the study group, and awareness of healthy behaviour, affecting health of responders were discussed. Results The responders demonstrated the knowledge of the stressors associated with their profession. In addition, they demonstrated the ability to take action, aimed to preserve the health potential. Moreover, the subjects showed no unhealthy tendencies leading to

Two approaches, one problem: Cultural constructions of type II diabetes in an indigenous community in Yucatán, Mexico.

Science.gov (United States)

Frank, Sarah M; Durden, T Elizabeth

2017-01-01

The emerging epidemic of obesity and type II diabetes in Mexico has recently propelled the nation into the public health spotlight. In the state of Yucatán, the experience of diabetes is greatly impacted by two cultural constructions of disease. In this setting, elements of Yucatec Mayan health practices as well as the biomedical model affect the approach to type II diabetes. Both frameworks offer unique understandings of the etiology of diabetes and recommend different ways to manage the condition. Based on in-depth and semi-structured interviews with both community members and clinicians, the present study seeks to understand how diabetes is understood and treated in indigenous settings in rural Yucatán. We explore the context in which community members navigate between locally available healthcare options, choose one over the other, or incorporate strategies from both into their diabetes care regimens. The tension between indigenous community members and their biomedical healthcare providers, the changing food environment of this community, and the persistence of traditional gender constructions affect the management of type II diabetes and its associated symptoms. Copyright © 2016 Elsevier Ltd. All rights reserved.

EXPERIMENTAL REPAIR OF DEEP CORNEAL DEFECTS USING A BIO-CONSTRUCT COMPRISING A COLLAGEN TYPE I MATRIX LOADED WITH BUCCAL EPITHELIAL CELLS

Directory of Open Access Journals (Sweden)

N. S. Egorova

2017-01-01

Full Text Available The  research  objective was  to study the  reparative effects of  the  collagen  type  I bio-construct loaded  with buccal epithelial cells, on the rabbit cornea after experimental keratectomy at various stages of treatment (on the 3rd, 7th, 14th, 3 0th days.Material  and methods.  The  experiments were  conducted on 20 rabbits  of  the  Chinchilla breed that  were  operated on cornea of both eyes aiming to inflict epithelial and stromal cornea defects. The collagen-based bio-construct bearing buccal epithelial cells was placed  over the cornea of the experimental eyes. The  cornea of the control  eyes was covered with smooth contact lens. After the surgery, a temporal blepharorrhaphy was performed and kept for 3 days. We studied macroand microscopic pattern of corneal regeneration at 3, 7, 14, and 30 days of experiment.Results. When  using the collaged-based bio-construct containing buccal epithelial cells, the complete epithelialization of the corneal defect occurred at mean 7 days earlier compared to that in the control eyes. Thus, the offered bio-construct stimulated the cell migration and proliferation at early stages of treatment (3–7 days reducing the inflammation activity.Conclusion. The bio-construct comprising a collagen type  I matrix loaded with buccal epithelial cells can provide an effective treatment option for corneal defects.

Student Experiences: the 2013 Cascadia Initiative Expedition Team's Apply to Sail Program

Science.gov (United States)

Mejia, H.; Hooft, E. E.; Fattaruso, L.

2013-12-01

During the summer of 2013, the Cascadia Initiative Expedition Team led six oceanographic expeditions to recover and redeploy ocean bottom seismometers (OBSs) across the Cascadia subduction zone and Juan de Fuca plate. The Cascadia Initiative (CI) is an onshore/offshore seismic and geodetic experiment to study questions ranging from megathrust earthquakes to volcanic arc structure to the formation, deformation and hydration of the Juan de Fuca and Gorda plates with the overarching goal of understanding the entire subduction zone system. The Cascadia Initiative Expedition Team is a team of scientists charged with leading the oceanographic expeditions to deploy and recover CI OBSs and developing the associated Education and Outreach effort. Students and early career scientists were encouraged to apply to join the cruises via the Cascadia Initiative Expedition Team's Apply to Sail Program. The goal of this call for open participation was to help expand the user base of OBS data by providing opportunities for students and scientists to directly experience at-sea acquisition of OBS data. Participants were required to have a strong interest in learning field techniques, be willing to work long hours at sea assisting in OBS deployment, recovery and preliminary data processing and have an interest in working with the data collected. In total, there were 51 applicants to the Apply to Sail Program from the US and 4 other countries; 21 graduate students as well as a few undergraduate students, postdocs and young scientists from the US and Canada were chosen to join the crew. The cruises lasted from 6 to 14 days in length. OBS retrievals comprised the three first legs, of which the first two were aboard the Research Vessel Oceanus. During each of the retrievals, multiple acoustic signals were sent while the vessel completed a semi-circle around the OBS to accurately determine its position, a final signal was sent to drop the seismometer's anchor, and finally the ship and crew

Differential analysis of the doping behaviour templates in three types of sports.

Science.gov (United States)

Rodek, Jelena; Idrizović, Kemal; Zenić, Natasa; Perasović, Benjamin; Kondric, Miran

2013-05-01

Conducted researches recognize various risk factors, as well as protective factors against doping behaviour in different sports i.e. sports disciplines or activities. The main goal of this research was to identify the correlation between selected socio-demographic, health-related, and sports-related predictors with doping factors in three different types of sports, which are (1) highly energetic demanding sports (weightlifting), (2) highly technical demanding sports (racquet sports), and (3) highly tactical demanding sports (sailing). The research consisted of three separate studies, each one of them researching one of the sports. The sample of subjects included altogether 293 athletes, senior level competitors (older than 18years of age). In total, the sample comprised three homogenous sub-samples, as follows: athletes in highly energetic demanding sports (weightlifters and power lifters; N=27), athletes in highly technical demanding sports (table tennis, tennis and badminton players; N=188), and athletes in highly tactical demanding sports (sailing; N=78). The first study involved weightlifters where we should point out the existence of high doping behaviour In this study, religiousness was interpreted as the most significant protective factor against doping behaviour, while sports factors are not found to be significantly related to doping. The study involving racquet sport athletes suggests a high risk of doping behaviour among those athletes who observe doping behaviour in their sport. We noticed low levels of athletes' trust in their coaches' and physicians' opinions on doping issues. This is an issue which should be researched in the future, because the underlying cause has not been studied as yet. Briefly, it seems that either the athletes are not convinced of their coaches '/physicians' expertise regarding doping issues, and/or they do not believe in their good intentions. It is particularly important, as the previous research has shown that with the

Construction and expression of secreting type human TRAIL gene vector mediated by hypoxia/radiation double sensitive promoter

International Nuclear Information System (INIS)

Yang Yanming; Jia Xiaojing; Qu Yaqin; Li Yanbo

2009-01-01

Objective: To construct secreting type human TRAIL (shTRAIL) gene vector pcDNA3.1-HRE/Egr1-shTRAIL mediated by hypoxia/radiation double sensitive promoter, and observe the effect of hypoxia and radiation on shTRAIL. Methods: HRE upper and lower strands were gotten by chemical synthesis, double strands HRE was gotten by PCR; pMD19T-Egr1 was digested by Sac I and Hind III, then Egr1 was obtained, pshuttle-shTRAIL was digested by Kpn I and BamH I, then shTRAIL was obtained; HRE/Egr1 double sensitive promoter mediated shTRAIL expression vector pcDNA3.1-HRE/Egr1-shTRAIL was constructed by gene recombination technique, it was identified correctly by enzyme digestion, PCR and sequencing. A549 cells were divided into normal, hypoxia (0.1%), irradiation (6 Gy) and hypoxia + irradiation groups. Results: After enzyme digestion by BamH I and Sma I, the fragments which lengths were 1284 bp and 4 998 bp, 2 292 bp and 3 990 bp were obtained; the vector was amplified by PCR with Egr1 and shTRAIL primer, the products which lengthens were 469 bp and 820 bp were obtained; pcDNA3.1-HRE/Egr1-shTRAIL was sequenced, the result was same to designed, this demonstrated that the construction was right. The vectors were transfected into A549 cells of adenocarcinoma of lung, the expression levels of shTRAIL mRNA and protein were increased after treated with hypoxia and radiation, it had statistically significant differences compared with normal group (P<0.05), and when they were combinated, the effect was more obvious. Conclusion: Secreting type human TRAIL gene vector pcDNA3.1-HRE/Egr1-shTRAIL mediated by hypoxia/radiation double sensitive promoter is constructed successfully, and hypoxia and radiation could increase the expression of TRAIL, and they have synergetic effect. (authors)

Construction of rat cell lines that contain potential morphologically transforming regions of the herpes simplex virus type 2 genome

NARCIS (Netherlands)

van den Berg, F. M.; van Amstel, P. J.; Walboomers, J. M.

1985-01-01

Hybrid recombinant plasmids were constructed; they were composed of the herpes simplex virus type 2 (HSV2) thymidine kinase (tk) gene and DNA sequences of HSV2 that have been reported to induce morphological and/or oncogenic transformation of rodent cells in culture. Several plasmids were made in

Meticulous plans make plant sail

International Nuclear Information System (INIS)

Anon.

1984-01-01

It takes about five years for a top nuclear builder in the US to bring in a new plant. In Japan, they'd already be working on the second unit. The reasons why the Japanese can construct a nuclear power plant 2-7 years ahead of their US counterparts is discussed

The Classification of Types of Business-to-Business Electronic Commerce: A Framework Construction

Directory of Open Access Journals (Sweden)

Jong-min Choe

2017-01-01

Full Text Available Based on the degree of information sharing between buyers and suppliers as well as the level of supplier power, we suggested a framework that can be useful for classifying types of business to business (B2B electronic commerce (EC in the manufacturing firms. According to this framework, four kinds of B2B EC were theoretically proposed, classified, and empirically confirmed. These four are: an electronic marketplace, electronic procurement, electronic partnerships, and electronic distribution. Many prior studies have investigated and proposed some kinds of B2B EC. However, these studies focused mostly on one or two types of B2B EC, and did not develop or suggest a framework for the classification of forms of B2B EC. The framework constructed in this research can be utilized variously. Specifically, when a firm wants to initiate B2B EC with its suppliers, this framework can help a firm to decide and select an appropriate kind of B2B EC. This framework can also be applied to evaluate whether the proper form of B2B EC has been adopted or not.

Formation of optimal construction fleet composition

Science.gov (United States)

Tuskaeva, Zalina

2017-10-01

Machinery supply and its rational use in construction processes considerably determine the final product of construction organizations. Therefore, the problem of defining the type size composition of the construction fleet as one of the lowest material-intensive productions, is of a particular importance.

Interrogative constructions in Danish Sign Language (DSL)

DEFF Research Database (Denmark)

Hansen, Julie

This study investigates the primary types of interrogative constructions: Polar and content questions. The aim is to identify how and in which types of interrogative constructions the non-manual patterns described by Engberg-Pedersen (1993, 1998)are used. Furthermore, the aim is to identify...

Shallow Population Genetic Structures of Thread-sail Filefish ( Populations from Korean Coastal Waters

Directory of Open Access Journals (Sweden)

M. Yoon

2012-02-01

Full Text Available Genetic diversities, population genetic structures and demographic histories of the thread-sail filefish Stephanolepis cirrhifer were investigated by nucleotide sequencing of 336 base pairs of the mitochondrial DNA (mtDNA control region in 111 individuals collected from six populations in Korean coastal waters. A total of 70 haplotypes were defined by 58 variable nucleotide sites. The neighbor-joining tree of the 70 haplotypes was shallow and did not provide evidence of geographical associations. Expansion of S. cirrhifer populations began approximate 51,000 to 102,000 years before present, correlating with the period of sea level rise since the late Pleistocene glacial maximum. High levels of haplotype diversities (0.974±0.029 to 1.000±0.076 and nucleotide diversities (0.014 to 0.019, and low levels of genetic differentiation among populations inferred from pairwise population FST values (−0.007 to 0.107, support an expansion of the S. cirrhifer population. Hierarchical analysis of molecular variance (AMOVA revealed weak but significant genetic structures among three groups (FCT = 0.028, p<0.05, and no genetic variation within groups (0.53%; FSC = 0.005, p = 0.23. These results may help establish appropriate fishery management strategies for stocks of S. cirrhifer and related species.

SAI/EPRI Albedo Information Library

International Nuclear Information System (INIS)

Simmons, G.L.

1979-03-01

The SAI/EPRI Albedo Information Library (SAIL) is described. This description included the techniques used to develop the data and comparisons with albedo data. Albedo data are presented for Type 04 Concrete and Low Carbon Steel, the most common materials encountered in radiation streaming analysis. Applications of the SAIL data are presented and compared with experimental results

Environmental impact assessment of a package type IFAS reactor during construction and operational phases: a life cycle approach.

Science.gov (United States)

Singh, Nitin Kumar; Singh, Rana Pratap; Kazmi, Absar Ahmad

2017-05-01

In the present study, a life cycle assessment (LCA) approach was used to analyse the environmental impacts associated with the construction and operational phases of an integrated fixed-film activated sludge (IFAS) reactor treating municipal wastewater. This study was conducted within the boundaries of a research project that aimed to investigate the implementation related challenges of a package type IFAS reactor from an environmental perspective. Along with the LCA results of the construction phase, a comparison of the LCA results of seven operational phases is also presented in this study. The results showed that among all the inputs, the use of stainless steel in the construction phase caused the highest impact on environment, followed by electricity consumption in raw materials production. The impact of the construction phase on toxicity impact indicators was found to be significant compared to all operational phases. Among the seven operational phases of this study, the dissolved oxygen phase III, having a concentration of ∼4.5 mg/L, showed the highest impact on abiotic depletion, acidification, global warming, ozone layer depletion, human toxicity, fresh water eco-toxicity, marine aquatic eco-toxicity, terrestrial eco-toxicity, and photochemical oxidation. However, better effluent quality in this phase reduced the eutrophication load on environment.

Cell-type specific oxytocin gene expression from AAV delivered promoter deletion constructs into the rat supraoptic nucleus in vivo.

Directory of Open Access Journals (Sweden)

Raymond L Fields

Full Text Available The magnocellular neurons (MCNs in the hypothalamus selectively express either oxytocin (OXT or vasopressin (AVP neuropeptide genes, a property that defines their phenotypes. Here we examine the molecular basis of this selectivity in the OXT MCNs by stereotaxic microinjections of adeno-associated virus (AAV vectors that contain various OXT gene promoter deletion constructs using EGFP as the reporter into the rat supraoptic nucleus (SON. Two weeks following injection of the AAVs, immunohistochemical assays of EGFP expression from these constructs were done to determine whether the EGFP reporter co-localizes with either the OXT- or AVP-immunoreactivity in the MCNs. The results show that the key elements in the OT gene promoter that regulate the cell-type specific expression the SON are located -216 to -100 bp upstream of the transcription start site. We hypothesize that within this 116 bp domain a repressor exists that inhibits expression specifically in AVP MCNs, thereby leading to the cell-type specific expression of the OXT gene only in the OXT MCNs.

The use of typed lambda calculus for comprehension and construction of simulation models in the domain of ecology

Science.gov (United States)

Uschold, Michael

1992-01-01

We are concerned with two important issues in simulation modelling: model comprehension and model construction. Model comprehension is limited because many important choices taken during the modelling process are not documented. This makes it difficult for models to be modified or used by others. A key factor hindering model construction is the vast modelling search space which must be navigated. This is exacerbated by the fact that many modellers are unfamiliar with the terms and concepts catered to by current tools. The root of both problems is the lack of facilities for representing or reasoning about domain concepts in current simulation technology. The basis for our achievements in both of these areas is the development of a language with two distinct levels; one for representing domain information, and the other for representing the simulation model. Of equal importance, is the fact that we make formal connections between these two levels. The domain we are concerned with is ecological modelling. This language, called Elklogic, is based on the typed lambda calculus. Important features include a rich type structure, the use of various higher order functions, and semantics. This enables complex expressions to be constructed from relatively few primitives. The meaning of each expression can be determined in terms of the domain, the simulation model, or the relationship between the two. We describe a novel representation for sets and substructure, and a variety of other general concepts that are especially useful in the ecological domain. We use the type structure in a novel way: for controlling the modelling search space, rather than a proof search space. We facilitate model comprehension by representing modelling decisions that are embodied in the simulation model. We represent the simulation model separately from, but in terms of a domain mode. The explicit links between the two models constitute the modelling decisions. The semantics of Elklogic enables

Application and Mechanics Analysis of Multi-Function Construction Platforms in Prefabricated-Concrete Construction

Science.gov (United States)

Wang, Meihua; Li, Rongshuai; Zhang, Wenze

2017-11-01

Multi-function construction platforms (MCPs) as an “old construction technology, new application” of the building facade construction equipment, its efforts to reduce labour intensity, improve labour productivity, ensure construction safety, shorten the duration of construction and other aspects of the effect are significant. In this study, the functional analysis of the multi-function construction platforms is carried out in the construction of the assembly building. Based on the general finite element software ANSYS, the static calculation and dynamic characteristics analysis of the MCPs structure are analysed, the simplified finite element model is constructed, and the selection of the unit, the processing and solution of boundary are under discussion and research. The maximum deformation value, the maximum stress value and the structural dynamic characteristic model are obtained. The dangerous parts of the platform structure are analysed, too. Multiple types of MCPs under engineering construction conditions are calculated, so as to put forward the rationalization suggestions for engineering application of the MCPs.

Experimental investigation of hole boring and light sail regimes of RPA by varying laser and target parameters

International Nuclear Information System (INIS)

Kar, S; Kakolee, K F; Doria, D; Quinn, K; Ramakrishna, B; Sarri, G; Zepf, M; Borghesi, M; Cerchez, M; Osterholz, J; Willi, O; Macchi, A; McKenna, P; Yuan, X H; Neely, D

2013-01-01

Temporal evolution of plasma jets from micrometre-scale thick foils following the interaction of intense (3 × 10 20  W cm −2 ) laser pulses is studied systematically by time resolved optical interferometry. The fluid velocity in the plasma jets is determined by comparing the data with 2D hydrodynamic simulation, which agrees with the expected hole-boring (HB) velocity due to the laser radiation pressure. The homogeneity of the plasma density across the jets has been found to be improved substantially when irradiating the laser at circular polarization compared to linear polarization. While overdense plasma jets were formed efficiently for micrometre thick targets, decreasing the target areal density and/or increasing the irradiance on the target have provided indication of transition from the ‘HB’ to the ‘light sail (LS)’ regime of RPA, characterized by the appearance of narrow-band spectral features at several MeV/nucleon in proton and carbon spectra. (paper)

Construction and characterization of a glycoprotein E deletion mutant of bovine herpesvirus type 1.2 strain isolated in Brazil

NARCIS (Netherlands)

Franco, A.C.; Rijsewijk, F.A.M.; Flores, E.F.; Weiblen, R.; Roehe, P.M.

2002-01-01

This paper describes the construction and characterization of a Brazilian strain of bovine herpesvirus type 1.2a (BoHV-1.2a) with a deletion of the glycoprotein E (gE) gene. The deletion was introduced by co-transfection of a deletion fragment containing the 5´and 3´gE flanking regions and genomic

Summary of nuclear power plant construction

International Nuclear Information System (INIS)

Tamura, Saburo

1973-01-01

Various conditions for the construction of nuclear power plants in Japan without natural resources were investigated. Expansion of the sites of plants, change of reactor vessels, standardization of nuclear power plants, possiblity of the reduction of construction period, approaching of nuclear power plants to consuming cities, and group construction were studied. Evaluation points were safety and economy. Previous sites of nuclear power plants were mostly on plane ground or cut and enlarge sites. Proposals for underground or offshore plants have been made. The underground plants were made at several places in Europe, and the ocean plant is now approved in U.S.A. as a plant on a man-made island. Vessels for containing nuclear reactors are the last barriers to the leakage of radioactive substance. At the initial period, the vessels were made of steel, which were surrounded by shielding material. Those were dry well type containers. Then, vessel type changed to pressure-suppression type wet containers. Now, it tends to concrete (PC or RC) type containers. There is the policy on the standardization of nuclear power plants by U.S.A.E.C. in recent remarkable activity. The merit and effect of the standardization were studied, and are presented in this paper. Cost of the construction of nuclear power plants is expensive, and interest of money is large. Then, the reduction of construction period is an important problem. The situations of plants approaching to consuming cities in various countries were studied. Idea of group construction is described. (Kato, T.)

Innovations in nuclear concrete constructions

International Nuclear Information System (INIS)

Tatum, C.B.

1983-01-01

The technical requirements and scope of concrete work on nuclear projects present significant engineering and construction challenges. These demands represent the extremes in many areas of construction operations. In meeting these challenges, engineering and construction forces have developed several innovations which can be beneficially applied to other types of construction. Innovative approaches in the general categories of engineering scope, construction input to engineering, work planning, special methods and techniques, and satisfaction of quality assurance requirements are given in this paper. The transfer of this technology to other segments of the construction industry will improve overall performance by avoiding the problem areas encountered on nuclear projects

Construction of adiponectin-encoding plasmid DNA and gene therapy of non-obese type 2 diabetes mellitus.

Science.gov (United States)

Nan, Mei Hua; Park, Jeong-Sook; Myung, Chang-Seon

2010-01-01

Adiponectin (ADN), an insulin-sensitizing adipokine, stimulates glucose uptake, inhibits gluconeogenesis, and plays an important role in improving insulin sensitivity. Since blood levels of ADN are low in type 2 diabetes mellitus (DM), this study was designed to investigate the therapeutic effectiveness of increasing the ADN level through injection of plasmid DNA encoding ADN in type 2 DM. A non-obese type 2 DM mouse model was established via combined administration of streptozotocin with nicotinamide and exhibited significantly higher plasma glucose concentration and insulin resistance compared with normal controls according to oral glucose tolerance and insulin challenge tests. Plasmid DNA encoding mouse ADN from differentiated NIH3T3 adipocytes was constructed in pVAX1 (pVAX/ADN). Transfection of pVAX/ADN into various cell lines including HeLa, HT22, HEK293, HepG2, and SK-Hep1 cells, increased ADN mRNA expression levels in a dose-dependent manner. The administration of pVAX/ADN into non-obese type 2 DM mice via tail vein significantly increased the blood level of ADN and decreased the plasma glucose concentration. Moreover, the parameters related to insulin resistance (HOMA-IR) and insulin sensitivity (QUICKI) were significantly improved. These results suggest that ADN gene therapy could be a clinically effective tool for the treatment of type 2 DM.

Construction labor productivity during nuclear power plant construction

International Nuclear Information System (INIS)

Murray, W.B.

1980-01-01

This paper discusses the three different types of productivity programs used at the Wm. H. Zimmer Nuclear Power Station construction site. The Standard Cost Estimate as Productivity Measurement compares actual units installed to estimated units. The Manpower and Equipment Utilization Study measures the present utilization level of the construction work force, identifies opportunities for productivity improvement, and establishes a data base against which future improvements could be made. The special productivity program is a specialized and detailed study of first line supervision. Productivity is defined as the degree of efficiency attained in the use of labor, professional and management skills and knowledge, materials and equipment, and time and money to produce an end result. It is concluded that a more consistent system of productivity measurements needs to be developed and promoted for general use in the construction industry

Use of the Hage framework for theory construction: Factors affecting glucose control in the college-aged student with type 1 diabetes.

Science.gov (United States)

Meyer, Rebecca A; Fish, Anne F; Lou, Qinqing

2017-10-01

This article describes the Hage framework for theory construction and its application to the clinical problem of glycemic control in college-aged students with type 1 diabetes. College-aged students with type 1 diabetes struggle to self-manage their condition. Glycated hemoglobin (HbA1c), if controlled within acceptable limits (6-8%), is associated with the prevention or delay of serious diabetic complications such as kidney and cardiovascular disease. Diabetes educators provide knowledge and skills, but young adults must self-manage their condition on a daily basis, independent of parents. The Hage framework includes five tasks of theory construction: narrowing and naming the concepts, specifying the definitions, creating the theoretical statements, specifying the linkages, and ordering components in preparation for model building. During the process, concepts within the theory were revised as the literature was reviewed, and measures and hypotheses, foundational to research, were generated. We were successful in applying the framework and creating a model of factors affecting glycemic control, emphasizing that physical activity, thought of as a normal part of wellness, can be a two-edged sword producing positive effect but also serious negative effects in some college-aged students with type 1 diabetes. Contextual factors important to self-management in college-aged students are emphasized. The Hage framework, already used to a small extent in nursing curricula, deserves more attention and, because of its generic nature, may be used as a template for theory construction to examine a wide variety of nursing topics. Copyright © 2017 Elsevier Inc. All rights reserved.

Economic potential of nuclear-powered ice-breaking container ship via the northern sea route

International Nuclear Information System (INIS)

Takamasa, Tomoji; Kondo, Koichi

2000-01-01

An improved cassette-type marine reactor MRX (Marine Reactor X) which is currently researched and developed by the JAERI is designed to be easily removed and transferred to another ship. If the reactor in a nuclear-powered ship, which is the reason for its higher cost, were replaced by the cassette-type-MRX, the reusability of the MRX would reduce the cost difference between nuclear-powered and diesel ships. As an investigation of one aspect of a cassette-type MRX, we attempted in this study to do an economic review of an MRX-installed nuclear-powered ice-breaking container ship sailing via the Arctic Ocean. The transportation cost between the Far East and Europe to carry one TEU (twenty-foot-equivalent container unit) over the entire life of the ship for an MRX (which is used for a 20-year period)-installed container ship sailing via the Arctic Ocean is about 70% higher than the Suez Canal diesel ship, carrying 8,000 TEU and sailing at 25 knots, and about 10% higher than the Suez Canal diesel ship carrying 4,000 TEU and sailing at 34 knots. The cost for a cassette-type-MRX (which is used for a 40-year period, removed and transferred to a second ship after being used for 20 years in the first ship)-installed nuclear-powered container ship is about 7% lower than that for the one operated for 20 years. Considering any loss or reduction in sales opportunities through the extension of the transportation period, the nuclear-powered container ship via the Arctic Sea is a more suitable means of transportation than a diesel ship sailing at 25 knots via the Suez Canal when the value of the commodities carried exceeds 2,800 dollars per freight ton. (author)

Analysis of Wind Data for Sports Performance Design: A Case Study for Sailing Sports

Directory of Open Access Journals (Sweden)

Alessandro Pezzoli

2014-11-01

Full Text Available Environmental conditions affect outdoor sports performance. This is particularly true in some sports, especially in the sport of sailing, where environmental parameters are extremely influential as they interact directly with strategic analysis of the race area and then with strategic analysis of the performance itself. For these reasons, this research presents an innovative methodology for the strategic analysis of the race course that is based on the integrated assessment of meteorological data measured on the ground, meteorological data measured at sea during the training activities and the results of the CALMET model in hindcasting over a limited scale. The results obtained by the above analysis are then integrated into a graphical representation that provides to coaches and athletes the main strategic directions of the race course in a simple and easy-to-use way. The authors believe that the innovative methodology that has been adopted in the present research may represent a new approach to the integrated analysis of meteorological data on coastal environments. On the other hand, the results of this analysis, if presented with an appropriate technique of meta‑communication adapted to the sport sectors, can be used effectively for the improvement of athletes’ performances.

Perfect and Periphrastic Passive Constructions in Danish

DEFF Research Database (Denmark)

Bjerre, Tavs; Bjerre, Anne

2007-01-01

This paper gives an account of the event and argument structure of past participles and the linking between argument structure and valence structure. It further accounts for how participles form perfect and passiv constructions with auxiliaries. We assume that the same participle form is used...... in both types of construction. Our claim is that the valence structure of a past participle is predictable from its semantic type, and that the valence structure predicts with which auciliary a past participle combines in perfect constructions and whether the past participle may occur in passiv...

Carbon footprint of construction using industrialised building system

Science.gov (United States)

Lim, P. Y.; Yahya, K.; Aminudin, E.; Zakaria, R.; Haron, Z.; Mohamad Zin, R.; Redzuan, A. A. H.

2017-11-01

Industrialised Building System (IBS) is more sustainable to the environment as compared to the conventional construction methods. However, the construction industry in Malaysia has low acceptance towards IBS due to the resistance to change and also lack of awareness towards sustainability development. Therefore, it is important to study the amount carbon footprint produced by IBS during its manufacturing and construction stage, and also the amount of carbon footprint produced by one meter square of gross floor area of IBS construction using Life Cycle Assessment (LCA) to ease future research through the comparison of the carbon footprint of IBS with the conventional building system. As a result, a case study on a residential type of construction in the vicinity of Johor Bahru, Malaysia was carried out to obtain the necessary data and result. From the data analysis, the amount of greenhouse gases (GHG) for a residential type IBS construction based on the raw materials and resources involved to manufacture and construct IBS components is 0.127 tonnes fossil CO2Eq per meter square. Raw material that contributed to the most amount of carbon footprint is Ordinary Portland Cement (OPC), followed by steel bars, autoclaved aerated blocks and diesel. The LCA data acquired will be very useful in implementing IBS in the residential type construction. As a result, the awareness towards sustainable construction using IBS can be improved.

Enzyme based soil stabilization for unpaved road construction

Directory of Open Access Journals (Sweden)

Renjith Rintu

2017-01-01

Full Text Available Enzymes as soil stabilizers have been successfully used in road construction in several countries for the past 30 years. However, research has shown that the successful application of these enzymes is case specific, emphasizing that enzyme performance is dependent on subgrade soil type, condition and the type of enzyme used as the stabilizer. A universal standard or a tool for road engineers to assess the performance of stabilized unbound pavements using well-established enzymes is not available to date. The research aims to produce a validated assessment tool which can be used to predict strength enhancement within a generalized statistical framework. The objective of the present study is to identify new materials for developing the assessment tool which supports enzyme based stabilization, as well as to identify the correct construction sequence for such new materials. A series of characterization tests were conducted on several soil types obtained from proposed construction sites. Having identified the suitable soil type to mix with the enzyme, a trial road construction has been performed to investigate the efficiency of the enzyme stabilization along with the correct construction sequence. The enzyme stabilization has showed significant improvement of the road performance as was evidenced from the test results which were based on site soil obtained before and after stabilization. The research will substantially benefit the road construction industry by not only replacing traditional construction methods with economical/reliable approaches, but also eliminating site specific tests required in current practice of enzyme based road construction.

[Effects of road construction on regional vegetation types].

Science.gov (United States)

Liu, Shi-Liang; Liu, Qi; Wang, Cong; Yang, Jue-Jie; Deng, Li

2013-05-01

As a regional artificial disturbance component, road exerts great effects on vegetation types, and plays a substantial role in defining vegetation distribution to a certain extent. Aiming at the tropical rainforest degradation and artificial forest expansion in Yunnan Province of Southwest China, this paper analyzed the effects of road network extension on regional vegetation types. In the Province, different classes of roads had different effects on the vegetation types, but no obvious regularity was observed in the effects on the patch areas of different vegetation types due to the great variations of road length and affected distance. However, the vegetation patch number was more affected by lower class roads because of their wide distribution. As for different vegetation types, the vegetations on cultivated land were most affected by roads, followed by Castanopsis hystrix and Schima wallichii forests. Road network formation contributed most to the vegetation fragmentation, and there existed significant correlations between the human disturbance factors including village- and road distributions.

BASES OF CONSTRUCTIVITY OF MODERN PERSONALITY

Directory of Open Access Journals (Sweden)

Natalya Petrovna Shatalova

2014-11-01

Full Text Available Formation of bases of constructibility is important process at this stage of de-velopment of our state. Personality of modern type must be capable to self-determination, competent adoption of constructive decisions and manifestation of a personal responsibility for the constructive election, personality of modern type must be capable for self-determination, competent adoption of constructive decisions and manifestation to a personal responsibility for the constructive choice. Formation of bases of constructibility in the course of education is caused by use of constructive tasks and the constructive educational environment which define innovative recep-tions and skills of influence as methods of pedagogical influence taking into account constantly changing circumstances. Extent of mastering each member of society bases of constructibility defines a spiritual condition of society, of the present and the future of our country, development of economy and culture in general.Purpose: consideration of question about development of constructive thinking and constructive skills of personality in modern constructive educational environ-ment.Methodology: formal pedagogical method, the theoretical modeling, the meth-od of participant observation.Results. In the article is give the short analysis of problem of development of personality in modern society, opened the concept of constructibility of the personali-ty and her basic components, classification constructive tasks investigated, specified preparatory steps for organization of the conditions of development of a constructibil-ity and gives a brief description of their. Article has the scientific value as contains au-thor's generalizations possessing scientific novelty and the conclusions directed on disclosure of problems of formation and development of the modern personality, considered from the point of view of the theory of democratic constructivism in edu-cation.Practical implications: pedagogical