Tank 241-C-104 vapor sampling and analysis tank characterization report

International Nuclear Information System (INIS)

Huckaby, J.L.

1995-01-01

Tank 241-C-104 headspace gas and vapor samples were collected and analyzed to help determine the potential risks to tank farm workers due to fugitive emissions from the tank. The drivers and objectives of waste tank headspace sampling and analysis are discussed in open-quotes Program Plan for the Resolution of Tank Vapor Issues.close quotes Tank 241-C-104 was vapor sampled in accordance with open-quotes Data Quality Objectives for Generic In-Tank Health and Safety Issue Resolution.close quotes

Tank 241-BY-103 vapor sampling and analysis tank characterization report

International Nuclear Information System (INIS)

Huckaby, J.L.

1995-01-01

Tank 241-BY-103 headspace gas and vapor samples were collected and analyzed to help determine the potential risks to tank farm workers due to fugitive emissions from the tank. The drivers and objectives of waste tank headspace sampling and analysis are discussed in open-quotes Program Plan for the Resolution of Tank Vapor Issues.close quotes Tank 241-BY-103 was vapor sampled in accordance with open-quotes Data Quality Objectives for Generic In-Tank Health and Safety Issue Resolution.close quotes

Tank 241-U-107 vapor sampling and analysis tank characterization report

Energy Technology Data Exchange (ETDEWEB)

Huckaby, J.L.

1995-05-31

Tank 241-U-107 headspace gas and vapor samples were collected and analyzed to help determine the potential risks to tank farm workers due to fugitive emissions from the tank. The drivers and objectives of waste tank headspace sampling and analysis are discussed in {open_quotes}Program Plan for the Resolution of Tank Vapor Issues.{close_quotes} Tank 241-U-107 was vapor sampled in accordance with {open_quotes}Data Quality Objectives for Generic In-Tank Health and Safety Issue Resolution.{close_quotes}

Transient analysis for resolving safety issues

International Nuclear Information System (INIS)

Chao, J.; Layman, W.

1987-01-01

The Nuclear Safety Analysis Center (NSAC) has a Generic Safety Analysis Program to help resolve high priority generic safety issues. This paper describes several high priority safety issues considered at NSAC and how they were resolved by transient analysis using thermal hydraulics and neutronics codes. These issues are pressurized thermal shock (PTS), anticipated transients without scram (ATWS), steam generator tube rupture (SGTR), and reactivity transients in light of the Chernobyl accident

A dispersion safety factor for LNG vapor clouds

Energy Technology Data Exchange (ETDEWEB)

Vílchez, Juan A. [TIPs – Trámites, Informes y Proyectos, SL, Llenguadoc 10, 08030 Barcelona (Spain); Villafañe, Diana [Centre d’Estudis del Risc Tecnològic (CERTEC), Universitat Politècnica de Catalunya, Diagonal 647, 08028 Barcelona, Catalonia (Spain); Casal, Joaquim, E-mail: joaquim.casal@upc.edu [Centre d’Estudis del Risc Tecnològic (CERTEC), Universitat Politècnica de Catalunya, Diagonal 647, 08028 Barcelona, Catalonia (Spain)

2013-02-15

Highlights: ► We proposed a new parameter: the dispersion safety factor (DSF). ► DSF is the ratio between the distance reached by the LFL and that reached by the visible cloud. ► The results for the DSF agree well with the evidence from large scale experiments. ► Two expressions have been proposed to calculate DSF as a function of H{sub R}. ► The DSF may help in indicating the danger of ignition of a LNG vapor cloud. -- Abstract: The growing importance of liquefied natural gas (LNG) to global energy demand has increased interest in the possible hazards associated with its storage and transportation. Concerning the event of an LNG spill, a study was performed on the relationship between the distance at which the lower flammability limit (LFL) concentration occurs and that corresponding to the visible contour of LNG vapor clouds. A parameter called the dispersion safety factor (DSF) has been defined as the ratio between these two lengths, and two expressions are proposed to estimate it. During an emergency, the DSF can be a helpful parameter to indicate the danger of cloud ignition and flash fire.

A dispersion safety factor for LNG vapor clouds

International Nuclear Information System (INIS)

Vílchez, Juan A.; Villafañe, Diana; Casal, Joaquim

2013-01-01

Highlights: ► We proposed a new parameter: the dispersion safety factor (DSF). ► DSF is the ratio between the distance reached by the LFL and that reached by the visible cloud. ► The results for the DSF agree well with the evidence from large scale experiments. ► Two expressions have been proposed to calculate DSF as a function of H R . ► The DSF may help in indicating the danger of ignition of a LNG vapor cloud. -- Abstract: The growing importance of liquefied natural gas (LNG) to global energy demand has increased interest in the possible hazards associated with its storage and transportation. Concerning the event of an LNG spill, a study was performed on the relationship between the distance at which the lower flammability limit (LFL) concentration occurs and that corresponding to the visible contour of LNG vapor clouds. A parameter called the dispersion safety factor (DSF) has been defined as the ratio between these two lengths, and two expressions are proposed to estimate it. During an emergency, the DSF can be a helpful parameter to indicate the danger of cloud ignition and flash fire

Tank 241-C-108 vapor sampling and analysis tank characterization report. Revision 1

International Nuclear Information System (INIS)

Huckaby, J.L.

1995-01-01

Tank 241-C-108 headspace gas and vapor samples were collected and analyzed to help determine the potential risks to tank farm workers due to fugitive emissions from the tank. The drivers and objectives of waste tank headspace sampling and analysis are discussed in open-quotes Program Plan for the Resolution of Tank Vapor Issues.close quotes Tank 241-C-108 was vapor sampled in accordance with open-quotes Data Quality Objectives for Generic In-Tank Health and Safety Issue Resolution.close quotes

Tank 241-BY-107 vapor sampling and analysis tank characterization report. Revision 1

International Nuclear Information System (INIS)

Huckaby, J.L.

1995-01-01

Tank 241-BY-107 headspace gas and vapor samples were collected and analyzed to help determine the potential risks to tank farm workers due to fugitive emissions from the tank. The drivers and objectives of waste tank headspace sampling and analysis are discussed in open-quotes Program Plan for the Resolution of Tank Vapor Issues.close quotes Tank 241-BY-107 was vapor sampled in accordance with open-quotes Data Quality Objectives for Generic In-Tank Health and Safety Issue Resolution.close quotes

Tank 241-BY-108 vapor sampling and analysis tank characterization report. Revision 1

International Nuclear Information System (INIS)

Huckaby, J.L.

1995-01-01

Tank 241-BY-108 headspace gas and vapor samples were collected and analyzed to help determine the potential risks to tank farm workers due to fugitive emissions from the tank. The drivers and objectives of waste tank headspace sampling and analysis are discussed in ''Program Plan for the Resolution of Tank Vapor Issues'' (Osborne and Huckaby 1994). Tank 241-BY-108 was vapor sampled in accordance with ''Data Quality Objectives for Generic In-Tank Health and Safety Issue Resolution (Osborne et al., 1994)

Tank 241-BY-106 vapor sampling and analysis tank characterization report. Revision 1

International Nuclear Information System (INIS)

Huckaby, J.L.

1995-01-01

Tank 241-BY-106 headspace gas and vapor samples were collected and analyzed to help determine the potential risks to tank farm workers due to fugitive emissions from the tank. The drivers and objectives of waste tank headspace sampling and analysis are discussed in open-quotes Program Plan for the Resolution of Tank Vapor Issues.close quotes Tank 241-BY-106 was vapor sampled in accordance with open-quotes Data Quality Objectives for Generic In-Tank Health and Safety Issue Resolution.close quotes

Evaluation on safety issues of SMART

International Nuclear Information System (INIS)

Kim, W. S.; Seol, K. W.; Yoon, Y. K.; Lee, J. H.

2001-01-01

Safety issues on the SMART were evaluated in the light of the compliance with the Ministerial Ordinance of Technical Requirements applying to Nuclear Installations, which was recently revised. Evaluation concludes that regulatory requirements associated with following items have to be developed as the licensing criteria for the SMART: (1) proving the safety of design or materials different form existing reactors; (2) coping with beyond design basis accidents; (3) rulemaking on the safety of reactor safeguard vessel ; (4) ensuring integrity of steam generator tubes; and (5) classifying equipment based on their safety significance. Appropriate actions including implementation of new requirements under development should be taken for safety issues such as diversity of reactivity control and in-service inspection of steam generator tubes that are not complied with the current Technical Requirements. Safety level of the SMART design will be evaluated further by the more detailed assessment according to the Technical Requirements, and additional safety issues will be identified and resolved, if it necessary

Status of safety issues at licensed power plants

International Nuclear Information System (INIS)

1991-05-01

As part of ongoing US Nuclear Regulatory Commission (NRC) efforts to ensure the quality and accountability of safety issue information, a program has been established whereby an annual NUREG report will be published on the status of licensee implementation and NRC verification of safety issues in major NRC requirement areas. This report, the second volume of a three-volume series, addresses the status of unresolved safety issues (USIs) at licensed plants. The data contained in these NUREG reports are a product of the NRC's Safety Issues Management System (SIMS) database, which is maintained by the Project Management Staff in the Office of Nuclear Reactor Regulation and by NRC regional personnel. The purpose of this report is to provide a comprehensive description of the status of implementation and verification of the 27 safety issues designated as USIs and to make this information available to other interested parties, including the public. A corollary purpose of this NUREG report is to serve as a follow-on to NUREG-0933, ''A Prioritization of Generic Safety Issues,'' which tracks safety issues up until requirements are approved for imposition at licensed plants. 3 figs., 4 tabs

Hydrogen Safety Issues Compared to Safety Issues with Methane and Propane

International Nuclear Information System (INIS)

Green, Michael A.

2005-01-01

The hydrogen economy is not possible if the safety standards currently applied to liquid hydrogen and hydrogen gas by many laboratories are applied to devices that use either liquid or gaseous hydrogen. Methane and propane are commonly used by ordinary people without the special training. This report asks, 'How is hydrogen different from flammable gasses that are commonly being used all over the world?' This report compares the properties of hydrogen, methane and propane and how these properties may relate to safety when they are used in both the liquid and gaseous state. Through such an analysis, sensible safety standards for the large-scale (or even small-scale) use of liquid and gaseous hydrogen systems can be developed. This paper is meant to promote discussion of issues related to hydrogen safety so that engineers designing equipment can factor sensible safety standards into their designs

Hydrogen Safety Issues Compared to Safety Issues with Methane andPropane

Energy Technology Data Exchange (ETDEWEB)

Green, Michael A.

2005-08-20

The hydrogen economy is not possible if the safety standards currently applied to liquid hydrogen and hydrogen gas by many laboratories are applied to devices that use either liquid or gaseous hydrogen. Methane and propane are commonly used by ordinary people without the special training. This report asks, 'How is hydrogen different from flammable gasses that are commonly being used all over the world?' This report compares the properties of hydrogen, methane and propane and how these properties may relate to safety when they are used in both the liquid and gaseous state. Through such an analysis, sensible safety standards for the large-scale (or even small-scale) use of liquid and gaseous hydrogen systems can be developed. This paper is meant to promote discussion of issues related to hydrogen safety so that engineers designing equipment can factor sensible safety standards into their designs.

Editorial safety science special issue road safety management.

NARCIS (Netherlands)

Wegman, F.C.M. & Hagezieker, M.P.

2014-01-01

The articles presented in this Special Issue on Road Safety Management represent an illustration of the growing interest in policy-related research in the area of road safety. The complex nature of this type of research combined with the observation that scientific journals pay limited attention to

Tank 241-BY-107 vapor sampling and analysis tank characterization report

International Nuclear Information System (INIS)

Huckaby, J.L.

1995-01-01

Tank 241-BY-107 headspace gas and vapor samples were collected and analyzed to help determine the potential risks to tank farm workers due to fugitive emissions from the tank. The drivers and objectives of waste tank headspace sampling and analysis are discussed in open-quotes Program Plan for the Resolution of Tank Vapor Issuesclose quotes. Tank 241-BY-107 was vapor sampled in accordance with open-quotes Data Quality Objectives for Generic In-Tank Health and Safety Issue Resolutionclose quotes

Status of safety issues at licensed power plants

International Nuclear Information System (INIS)

1991-06-01

As part of ongoing US Nuclear Regulatory Commission (NRC) efforts to ensure the quality and accountability of safety issue information, a program has been established whereby an annual NUREG report will be published on the status of licensee implementation and NRC verification of safety issues in major NRC requirement areas. This report, the third volume of a three-volume series, addresses the status of generic safety issues (GSIs) at licensed plants. Volume 1 addressed the status of Three Mile Island Action Plan requirements and was published in March 1991. Volume 2 addressed the status of implementation and verification of unresolved safety issues and was published in May 1991. The annual NUREG report will combine these three areas in a single volume to be published in late 1991. The data contained in these NUREG reports are a product of the NRC's Safety Issues Management System (SIMS) database, which is maintained by the Project Management Staff in the Office of Nuclear Reactor Regulation and by NRC regional personnel. The purpose of this report is to provide a comprehensive description of the status of implementation and verification of the 34 GSIs and sub-issues that have been resolved by the NRC and involve implementation of an action or actions by licensees. This NUREG report also serves as a follow-on to NUREG-0933, ''A Prioritization of Generic Safety Issues,'' which tracks safety issues up until a request for action by licensees is issued by NRC. 3 figs., 6 tabs

Program plan for the resolution of tank vapor issues

International Nuclear Information System (INIS)

Osborne, J.W.; Huckaby, J.L.

1994-05-01

Since 1987, workers at the Hanford Site waste tank farms in Richland, Washington, have reported strong odors emanating from the large, underground high-level radioactive waste storage tanks. Some of these workers have complained of symptoms (e.g., headaches, nausea) related to the odors. In 1992, the U.S. Department of Energy, which manages the Hanford Site, and Westinghouse Hanford Company determined that the vapor emissions coming from the tanks had not been adequately characterized and represented a potential health risk to workers in the immediate vicinity of the tanks. At that time, workers in certain areas of the tank farms were required to use full-face, supplied-breathing-air masks to reduce their exposure to the fugitive emissions. While use of supplied breathing air reduced the health risks associated with the fugitive emissions, it introduced other health and safety risks (e.g., reduced field of vision, air-line tripping hazards, and heat stress). In 1992, an aggressive program was established to assure proper worker protection while reducing the use of supplied breathing air. This program focuses on characterization of vapors inside the tanks and industrial hygiene monitoring in the tank farms. If chemical filtration systems for mitigation of fugitive emissions are deemed necessary, the program will also oversee their design and installation. This document presents the plans for and approach to resolving the Hanford Site high-level waste tank vapor concerns. It is sponsored by the Department of Energy Office of Environmental Restoration and Waste Management

Vapor generation methods for explosives detection research

Energy Technology Data Exchange (ETDEWEB)

Grate, Jay W.; Ewing, Robert G.; Atkinson, David A.

2012-12-01

The generation of calibrated vapor samples of explosives compounds remains a challenge due to the low vapor pressures of the explosives, adsorption of explosives on container and tubing walls, and the requirement to manage (typically) multiple temperature zones as the vapor is generated, diluted, and delivered. Methods that have been described to generate vapors can be classified as continuous or pulsed flow vapor generators. Vapor sources for continuous flow generators are typically explosives compounds supported on a solid support, or compounds contained in a permeation or diffusion device. Sources are held at elevated isothermal temperatures. Similar sources can be used for pulsed vapor generators; however, pulsed systems may also use injection of solutions onto heated surfaces with generation of both solvent and explosives vapors, transient peaks from a gas chromatograph, or vapors generated by s programmed thermal desorption. This article reviews vapor generator approaches with emphasis on the method of generating the vapors and on practical aspects of vapor dilution and handling. In addition, a gas chromatographic system with two ovens that is configurable with up to four heating ropes is proposed that could serve as a single integrated platform for explosives vapor generation and device testing. Issues related to standards, calibration, and safety are also discussed.

High-heat tank safety issue resolution program plan

International Nuclear Information System (INIS)

Wang, O.S.

1993-12-01

The purpose of this program plan is to provide a guide for selecting corrective actions that will mitigate and/or remediate the high-heat waste tank safety issue for single-shell tank (SST) 241-C-106. This program plan also outlines the logic for selecting approaches and tasks to mitigate and resolve the high-heat safety issue. The identified safety issue for high-heat tank 241-C-106 involves the potential release of nuclear waste to the environment as the result of heat-induced structural damage to the tank's concrete, if forced cooling is interrupted for extended periods. Currently, forced ventilation with added water to promote thermal conductivity and evaporation cooling is used to cool the waste. At this time, the only viable solution identified to resolve this safety issue is the removal of heat generating waste in the tank. This solution is being aggressively pursued as the permanent solution to this safety issue and also to support the present waste retrieval plan. Tank 241-C-106 has been selected as the first SST for retrieval. The program plan has three parts. The first part establishes program objectives and defines safety issues, drivers, and resolution criteria and strategy. The second part evaluates the high-heat safety issue and its mitigation and remediation methods and alternatives according to resolution logic. The third part identifies major tasks and alternatives for mitigation and resolution of the safety issue. Selected tasks and best-estimate schedules are also summarized in the program plan

Hospital safety climate surveys: measurement issues.

Science.gov (United States)

Jackson, Jeanette; Sarac, Cakil; Flin, Rhona

2010-12-01

Organizational safety culture relates to behavioural norms in the workplace and is usually assessed by safety climate surveys. These can be a diagnostic indicator on the state of safety in a hospital. This review examines recent studies using staff surveys of hospital safety climate, focussing on measurement issues. Four questionnaires (hospital survey on patient safety culture, safety attitudes questionnaire, patient safety climate in healthcare organizations, hospital safety climate scale), with acceptable psychometric properties, are now applied across countries and clinical settings. Comparisons for benchmarking must be made with caution in case of questionnaire modifications. Increasing attention is being paid to the unit and hospital level wherein distinct cultures may be located, as well as to associated measurement and study design issues. Predictive validity of safety climate is tested against safety behaviours/outcomes, with some relationships reported, although effects may be specific to professional groups/units. Few studies test the role of intervening variables that could influence the effect of climate on outcomes. Hospital climate studies are becoming a key component of healthcare safety management systems. Large datasets have established more reliable instruments that allow a more focussed investigation of the role of culture in the improvement and maintenance of staff's safety perceptions within units, as well as within hospitals.

Food control concept: Food safety/ingestion issues

International Nuclear Information System (INIS)

Armstrong, B.

1995-01-01

This talk outlines the issues in food safety/ingestion in the case of radiation accidents at nuclear power plants and how emergency preparedness plans can/should be tailored. The major topics are as follows: In Washington: food safety/ingestion issues exist at transition between response and regulatory worlds; agricultural concerns; customer concerns; Three Mile Island: detailed maps; development of response procedures; development of tools; legal issues

The safety issues of medical robotics

Energy Technology Data Exchange (ETDEWEB)

Fei Baowei; Ng, W.S.; Chauhan, Sunita; Kwoh, Chee Keong

2001-08-01

In this paper, we put forward a systematic method to analyze, control and evaluate the safety issues of medical robotics. We created a safety model that consists of three axes to analyze safety factors. Software and hardware are the two material axes. The third axis is the policy that controls all phases of design, production, testing and application of the robot system. The policy was defined as hazard identification and safety insurance control (HISIC) that includes seven principles: definitions and requirements, hazard identification, safety insurance control, safety critical limits, monitoring and control, verification and validation, system log and documentation. HISIC was implemented in the development of a robot for urological applications that was known as URObot. The URObot is a universal robot with different modules adaptable for 3D ultrasound image-guided interstitial laser coagulation, radiation seed implantation, laser resection, and electrical resection of the prostate. Safety was always the key issue in the building of the robot. The HISIC strategies were adopted for safety enhancement in mechanical, electrical and software design. The initial test on URObot showed that HISIC had the potential ability to improve the safety of the system. Further safety experiments are being conducted in our laboratory.

The safety issues of medical robotics

International Nuclear Information System (INIS)

Fei Baowei; Ng, W.S.; Chauhan, Sunita; Kwoh, Chee Keong

2001-01-01

In this paper, we put forward a systematic method to analyze, control and evaluate the safety issues of medical robotics. We created a safety model that consists of three axes to analyze safety factors. Software and hardware are the two material axes. The third axis is the policy that controls all phases of design, production, testing and application of the robot system. The policy was defined as hazard identification and safety insurance control (HISIC) that includes seven principles: definitions and requirements, hazard identification, safety insurance control, safety critical limits, monitoring and control, verification and validation, system log and documentation. HISIC was implemented in the development of a robot for urological applications that was known as URObot. The URObot is a universal robot with different modules adaptable for 3D ultrasound image-guided interstitial laser coagulation, radiation seed implantation, laser resection, and electrical resection of the prostate. Safety was always the key issue in the building of the robot. The HISIC strategies were adopted for safety enhancement in mechanical, electrical and software design. The initial test on URObot showed that HISIC had the potential ability to improve the safety of the system. Further safety experiments are being conducted in our laboratory

Status of safety issues at licensed power plants

International Nuclear Information System (INIS)

1991-03-01

As part of ongoing US Nuclear Regulatory Commission (NRC) efforts to ensure the quality and accountability of safety issue information, a program has been established whereby an annual NUREG series report will be published on the status of licensee implementation and NRC verification of safety issues in major NRC requirement areas. The data contained in this report are a product of the NRC's Safety Issues Management System database, which is maintained by the Project Management Staff in the Office of Nuclear Reactor Regulation and by personnel in the NRC regions. This report has been prepared in order to provide a comprehensive description of the implementation and verification status of all the TMI Action Plan requirements at licensed reactors, and to make this information available to other interested parties, including the public. A corollary purpose of this report is for it to serve as a follow-on to NUREG-0933, ''A Prioritization of Safety Issues,'' which tracks safety issues up until requirements are approved for imposition at licensed facilities

Safety issues on advanced fuel

International Nuclear Information System (INIS)

Gross, H.; Krebs, W.D.

1998-01-01

In the recent years a general discussion has started whether unsolved safety issues are related to advanced fuel. Advanced fuel is in this context a summary of features like high burnup, improved clad materials, low leakage loading pattern with high peaking factors etc. The design basis accidents RIA and Loca are of special interest for this discussion. From the Siemens point of view RIA is not a safety issue. There are sufficient margins between the enthalpy rise calculated by modern 3D methods and the fuel failures which occurred in RIA simulation tests when the effect of pulse width is taken into account. The evaluation of possible uncertainties for the established Loca criteria (17% equivalent corrosion, 1200 C clad temperature) for high burnup makes sense. But fuel with high burnup has significantly lower peaking factors than fuel with lower burnup. This gives sufficient margin counterbalancing possible uncertainties. In contrast to the above incomplete control rod insertion at higher burnup is potentially a real safety issue. Although Siemens fuel was not affected by the reported incidents they addressed the problem and checked that they have sufficient design margin for their fuel. (orig.) [de

Safety assessment of in-vessel vapor explosion loads in next generation reactor

Energy Technology Data Exchange (ETDEWEB)

Bang, Kwang Hyun; Cho, Jong Rae; Choi, Byung Uk; Kim, Ki Yong; Lee, Kyung Jung [Korea Maritime University, Busan (Korea); Park, Ik Kyu [Seoul National University, Seoul (Korea)

1998-12-01

A safety assessment of the reactor vessel lower head integrity under in-vessel vapor explosion loads has been performed. The premixing and explosion calculations were performed using TRACER-II code. Using the calculated explosion pressures imposed on the lower head inner wall, strain calculations were performed using ANSYS code. The explosion analyses show that the explosion impulses are not altered significantly by the uncertain parameters of triggering location and time, fuel and vapor volume fractions in uniform premixture bounding calculations within the conservative ranges. Strain analyses using the calculated pressure loads on the lower head inner wall show that the vapor explosion-induced lower head failure is physically unreasonable. The static analysis using the conservative explosion-end pressure of 7,246 psia shows that the maximum equivalent strain is 4.3% at the bottom of lower head, which is less than the allowable threshold value of 11%. (author). 24 refs., 40 figs., 3 tabs.

Unresolved safety issues summary: aqua book

International Nuclear Information System (INIS)

1982-06-01

The unresolved safety issues summary is designed to provide the management of the Nuclear Regulatory Commission with a quarterly overview of the progress and plans for completion of generic tasks addressing unresolved safety issues reported to Congress pursuant to Section 210 of the Energy Reorganization Act of 1974 as amended. This summary utilizes data collected from the Office of Nuclear Reactor Regulation, Office of Nuclear Regulatory Research, and the National Laboratories and is prepared by the Office of Resource Management. The schedules in this book include a milestone at the end of each action plan which represents the initiation of the implementation process both with respect to incorporation of the technical resolution in the NRC official guidance or requirements and also the application of changes to individual operating plants. The progress and status for implementation of unresolved safety issues for which a technical resolution has been completed are reported specifically in a separate table provided in this summary

76 FR 67461 - Cosmetic Microbiological Safety Issues; Public Meeting

Science.gov (United States)

2011-11-01

...] Cosmetic Microbiological Safety Issues; Public Meeting AGENCY: Food and Drug Administration, HHS. ACTION... Administration (FDA) is announcing a public meeting entitled ``Cosmetic Microbiological Safety Issues.'' The... cosmetic microbiological safety and to suggest areas for the possible development of FDA guidance documents...

Categorization of reactor safety issues from a risk perspective

International Nuclear Information System (INIS)

1985-03-01

This report presents the results of an effort to identify and rank reactor safety and risk issues identified from past Probabilistic Risk Assessments (PRAs) and other safety analyses. Because of the varied scope of these analyses, the list of issues may be incomplete. Nevertheless, those studies comprised ordered analyses to whatever their respective depths; hence, they warranted scrutiny for whatever insights they could reveal with respect to issue importance. The top-ranked issues in terms of their contribution to the uncertainty in risk are described in some detail. All of these risk issues are compared to the generic safety issues for completeness and omissions

Unresolved safety issues: where do we go from here

International Nuclear Information System (INIS)

Aycock, M.B.

1980-01-01

Section 210 of the Energy reorganization Act of 1974, as amended requires the NRC to develop a program for resolving Unresolved Safety Issues related to nuclear power plants. Seventeen Unresolved Safety Issues were identified by the NRC in 1978 and by early 1979 the NRC Unresolved Safety Issues Program was quickly becoming a well defined and manageable effort. Although, the Three Mile Island accident caused the momentum developed in early 1979 to be lost, efforts on ongoing generic tasks were continued by a special NRC Task Force established in June 1979. The momentum that was lost must be regained, however, if the Congressional mandate in Section 210 is to be met. With increased industry involvement and the marriage of the Unresolved Safety Issues Program with the improved and broader safety program development, audit and evaluation activities of the new NRR Division of Safety Technology, this should be possible

Key issues for passive safety

International Nuclear Information System (INIS)

Hayns, M.R.

1996-01-01

The paper represents a summary of the introductory presentation made at this Advisory Group Meeting on the Technical Feasibility and Reliability of Passive Safety Systems. It was intended as an overview of our views on what are the key issues and what are the technical problems which might dominate any future developments of passive safety systems. It is, therefore, not a ''review paper'' as such and only record the highlights. (author)

Key issues for passive safety

Energy Technology Data Exchange (ETDEWEB)

Hayns, M R [AEA Technology, Harwell, Didcot (United Kingdom). European Institutions; Hicken, E F [Forschungszentrum Juelich GmbH (Germany)

1996-12-01

The paper represents a summary of the introductory presentation made at this Advisory Group Meeting on the Technical Feasibility and Reliability of Passive Safety Systems. It was intended as an overview of our views on what are the key issues and what are the technical problems which might dominate any future developments of passive safety systems. It is, therefore, not a ``review paper`` as such and only record the highlights. (author).

Unresolved safety issues summary: aqua book

International Nuclear Information System (INIS)

1983-06-01

The unresolved safety issues summary is designed to provide the management of the nuclear regulatory commission with a quarterly overview of the progress and plans for completion of generic tasks addressing unresolved safety issues reported to congress pursuant to section 210 of the Energy Reorganization Act of 1974 as amended. The schedules in this book include a milestone at the end of each action plan which represents the initiation of the implementation process both with respect to incorporation of the technical resolution in the NRC official guidance or requirements and also the application of changes to individual operating plants. The schedule for implementation will not normally be included in the task action plan(s) for the resolution of a USI since the nature and extent of the activities necessary to accomplish the implementation cannot normally be reasonably determined prior to the determination of a technical resolution. The progress and status for implementation of unresolved safety issues for which a technical resolution has been completed are reported specifically in a separate table provided in this summary

Effect of generic issues program on improving safety

International Nuclear Information System (INIS)

Fard, M. R.; Kauffman, J. V.

2010-01-01

The U.S. Nuclear Regulatory Commission (NRC) identifies (by its assessment of plant operation) certain issues involving public health and safety, the common defense and security, or the environment that could affect multiple entities under NRC jurisdiction. The Generic Issues Program (GIP) addresses the resolution of these Generic Issues (GIs). The resolution of these issues may involve new or revised rules, new or revised guidance, or revised interpretation of rules or guidance that affect nuclear power plant licensees, nuclear material certificate holders, or holders of other regulatory approvals. U.S. NRC provides information related to the past and ongoing GIP activities to the general public by the use of three main resources, namely NUREG-0933, 'Resolution of Generic Safety Issues, ' Generic Issues Management Control System (GIMCS), and GIP public web page. GIP information resources provide information such as historical information on resolved GIs, current status of the open GIs, policy documents, program procedures, GIP annual and quarterly reports and the process to contact GIP and propose a GI This paper provides an overview of the GIP and several examples of safety improvements resulting from the resolution of GIs. In addition, the paper provides a brief discussion of a few recent GIs to illustrate how the program functions to improve safety. (authors)

Practicing industrial safety - issues involved

International Nuclear Information System (INIS)

Gunasekaran, P.

2016-01-01

Industrial safety is all about measures or techniques implemented to reduce the risk of injury, loss to persons, property or the environment in any industrial facility. The issue of industrial safety evolved concurrently with industrial development as a shift from compensation to prevention as well. Today, industrial safety is widely regarded as one of the most important factors that any business, large or small, must consider in its operations, as prevention of loss is also a part of profit. Factories Act of Central government and Rules made under it by the state deals with the provisions on industrial safety legislation. There are many other acts related to safety of personnel, property and environment. Occupational health and safety is also of primary concern. The aim is to regulate health and safety conditions for all employers. It includes safety standards and health standards. These acts encourage employers and employees to reduce workplace hazards and to implement new or improve existing safety and health standards; and develop innovative ways to achieve them. Maintain a reporting and record keeping system to monitor job-related injuries and illnesses; establish training programs to increase the number and competence of occupational safety and health personnel

Safety Issues with Hydrogen as a Vehicle Fuel

Energy Technology Data Exchange (ETDEWEB)

L. C. Cadwallader; J. S. Herring

1999-09-01

This report is an initial effort to identify and evaluate safety issues associated with the use of hydrogen as a vehicle fuel in automobiles. Several forms of hydrogen have been considered: gas, liquid, slush, and hydrides. The safety issues have been discussed, beginning with properties of hydrogen and the phenomenology of hydrogen combustion. Safety-related operating experiences with hydrogen vehicles have been summarized to identify concerns that must be addressed in future design activities and to support probabilistic risk assessment. Also, applicable codes, standards, and regulations pertaining to hydrogen usage and refueling have been identified and are briefly discussed. This report serves as a safety foundation for any future hydrogen safety work, such as a safety analysis or a probabilistic risk assessment.

Safety Issues with Hydrogen as a Vehicle Fuel

Energy Technology Data Exchange (ETDEWEB)

Cadwallader, Lee Charles; Herring, James Stephen

1999-10-01

This report is an initial effort to identify and evaluate safety issues associated with the use of hydrogen as a vehicle fuel in automobiles. Several forms of hydrogen have been considered: gas, liquid, slush, and hydrides. The safety issues have been discussed, beginning with properties of hydrogen and the phenomenology of hydrogen combustion. Safety-related operating experiences with hydrogen vehicles have been summarized to identify concerns that must be addressed in future design activities and to support probabilistic risk assessment. Also, applicable codes, standards, and regulations pertaining to hydrogen usage and refueling have been identified and are briefly discussed. This report serves as a safety foundation for any future hydrogen safety work, such as a safety analysis or a probabilistic risk assessment.

Road safety issues for bus transport management.

Science.gov (United States)

Cafiso, Salvatore; Di Graziano, Alessandro; Pappalardo, Giuseppina

2013-11-01

Because of the low percentage of crashes involving buses and the assumption that public transport improves road safety by reducing vehicular traffic, public interest in bus safety is not as great as that in the safety of other types of vehicles. It is possible that less attention is paid to the significance of crashes involving buses because the safety level of bus systems is considered to be adequate. The purpose of this study was to evaluate the knowledge and perceptions of bus managers with respect to safety issues and the potential effectiveness of various technologies in achieving higher safety standards. Bus managers were asked to give their opinions on safety issues related to drivers (training, skills, performance evaluation and behaviour), vehicles (maintenance and advanced devices) and roads (road and traffic safety issues) in response to a research survey. Kendall's algorithm was used to evaluate the level of concordance. The results showed that the majority of the proposed items were considered to have great potential for improving bus safety. The data indicated that in the experience of the participants, passenger unloading and pedestrians crossing near bus stops are the most dangerous actions with respect to vulnerable users. The final results of the investigation showed that start inhibition, automatic door opening, and the materials and internal architecture of buses were considered the items most strongly related to bus passenger safety. Brake assistance and vehicle monitoring systems were also considered to be very effective. With the exception of driver assistance systems for passenger and pedestrian safety, the perceptions of the importance of other driver assistance systems for vehicle monitoring and bus safety were not unanimous among the bus company managers who participated in this survey. The study results showed that the introduction of new technologies is perceived as an important factor in improving bus safety, but a better understanding

International conference on topical issues in nuclear safety. Contributed papers

International Nuclear Information System (INIS)

2001-01-01

The objective of the Conference was to foster the exchange of information on topical issues in nuclear safety, with the aim of consolidating an international consensus on the present status of these issues, priorities for future work, and needs for strengthening international cooperation, including the IAEA recommendations for future activities. This book contains concise contributed papers submitted on issues falling within the thematic scope of the Conference: risk informed decision making, influence of external factors on safety, safety of fuel cycle facilities, safety of research reactors, and safety performance indicators

International conference on topical issues in nuclear safety. Contributed papers

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

The objective of the Conference was to foster the exchange of information on topical issues in nuclear safety, with the aim of consolidating an international consensus on the present status of these issues, priorities for future work, and needs for strengthening international cooperation, including the IAEA recommendations for future activities. This book contains concise contributed papers submitted on issues falling within the thematic scope of the Conference: risk informed decision making, influence of external factors on safety, safety of fuel cycle facilities, safety of research reactors, and safety performance indicators.

Safety and licensing issues for Indian PHWRs

International Nuclear Information System (INIS)

Srinivasan, G.R.; Das, M.

1997-01-01

India has achieved competency in design, construction, commissioning and operation of Pressurized Heavy Water Reactor based Nuclear Power Plants and has completed more than 120 reactor operating years with an extremely satisfactory safety record. In this paper, the safety management in NPCIL and operational safety aspects are discussed, licensing and regulatory approach is described and some of the main safety issues for Indian PHWRs are brought out. (author)

Characterization report for the ferrocyanide safety issue

International Nuclear Information System (INIS)

Pulsipher, B.A.; Burger, L.L.; Liebetrau, A.M.; Scheele, R.D.

1997-06-01

Recently PNNL was tasked by DOE to develop and demonstrate a risk-based strategic approach to characterizing Hanford's Nuclear Waste Tanks. This strategic approach was documented in a report entitled ''A Risk-Based Focused Decision-Management Approach for Justifying Characterization of Hanford Tank Waste''. In support of the general approach, a specific strategy for addressing each of the several safety issues associated with the tanks was developed. This report documents the approach for the Ferrocyanide Safety Issue. The purpose of this report is to describe a structured logic diagram (SLD) for determining the risk associated with the ferrocyanide tank safety issue and provide the supporting information for the SLD. The SLD addresses the resolution of risks resulting from the presence of ferrocyanide layers within the Hanford tanks. The informational requirements for determining risk from any reaction stemming from ferrocyanide are outlined in the SLD. This report will describe the potential paths to a successful resolution of the ferrocyanide safety issue. Complete development of the intervention pathway is outside the scope of this current activity. General descriptions of the approach, key components of the SLD, and conclusions are provided in the body of this report. The complete SLD, descriptions of each box shown in the SLD, a discussion on how to fill data needs, and a list of contributors is provided in the appendices

Strategy for resolution of the flammable gas safety issue

International Nuclear Information System (INIS)

Johnson, G.D.

1997-01-01

This document provides a strategy for resolution of the Flammable Gas Safety Issue. It defines the key elements required for the following: Closing the Flammable Gas Unreviewed Safety Question (USQ); Providing the administrative basis for resolving the safety issue; Defining the data needed to support these activities; and Providing the technical and administrative path for removing tanks from the Watch List

Strategy for resolution of the flammable gas safety issue

Energy Technology Data Exchange (ETDEWEB)

Johnson, G.D.

1997-05-23

This document provides a strategy for resolution of the Flammable Gas Safety Issue. It defines the key elements required for the following: Closing the Flammable Gas Unreviewed Safety Question (USQ); Providing the administrative basis for resolving the safety issue; Defining the data needed to support these activities; and Providing the technical and administrative path for removing tanks from the Watch List.

Draft pilot report - Approaches to the resolution of safety issues

International Nuclear Information System (INIS)

2006-01-01

The purpose of this report is to present in a concise form how some safety matters associated with currently operating light water reactors have been addressed. The issues discussed in this report are common to member countries with currently operating LWRs (PWR, BWR, VVER) and, as such, have wide interest in the nuclear safety community. Accordingly, this report can serve as a reference for researchers, regulations and others (e.g., industry) interested in understanding the approach and status of issues. This report should also be useful for knowledge transfer by documenting what has been done or is planned regarding selected safety matters and as a source for identifying reference material containing additional detail. The issues addressed in this report should not be viewed as questioning the safety of operating reactors, which have reached very high operational safety record, but rather as areas where uncertainty in knowledge exists, where safety assessment has been based on conservative assumptions, and where regulatory decisions need, or will need to be confirmed. Thus, the development of sound technical bases through continuing research will improve the current knowledge and allow for more realistic safety assessment. The safety issues discussed in this initial version of the report are: - design basis accident spectrum; - severe accident issues; - reactor pressure vessel integrity; - hydrogen control; - containment integrity; - accident management; - station blackout; - high burnup fuel; - power up-rates; - ECCS strainer clogging; - boron dilution. For each issue, the scope of the issue is defined, its status discussed and planned work or research described, including schedule. This pilot version of the report is limited to input from nine countries (Belgium, Czech Republic, Finland, France, Germany, Japan, Korea, Sweden and the U.S.). An overview of this information for each issue by country is provided in the table. This document does not contain a

High-heat tank safety issue resolution program plan. Revision 2

International Nuclear Information System (INIS)

Wang, O.S.

1994-12-01

The purpose of this program plan is to provide a guide for selecting corrective actions that will mitigate and/or remediate the high-heat waste tank safety issue for single-shell tank 241-C-106. The heat source of approximately 110,000 Btu/hr is the radioactive decay of the stored waste material (primarily 90 Sr) inadvertently transferred into the tank in the later 1960s. Currently, forced ventilation, with added water to promote thermal conductivity and evaporation cooling, is used for heat removal. The method is very effective and economical. At this time, the only viable solution identified to permanently resolve this safety issue is the removal of heat-generating waste in the tank. This solution is being aggressively pursued as the only remediation method to this safety issue, and tank 241-C-106 has been selected as the first single-shell tank for retrieval. The current cooling method and other alternatives are addressed in this program as means to mitigate this safety issue before retrieval. This program plan has three parts. The first part establishes program objectives and defines safety issue, drivers, and resolution criteria and strategy. The second part evaluates the high-heat safety issue and its mitigation and remediation methods and other alternatives according to resolution logic. The third part identifies major tasks and alternatives for mitigation and resolution of the safety issue. A table of best-estimate schedules for the key tasks is also included in this program plan

Advanced nuclear reactor safety issues and research needs

International Nuclear Information System (INIS)

2002-01-01

On 18-20 February 2002, the OECD Nuclear Energy Agency (NEA) organised, with the co-sponsorship of the International Atomic Energy Agency (IAEA) and in collaboration with the European Commission (EC), a Workshop on Advanced Nuclear Reactor Safety Issues and Research Needs. Currently, advanced nuclear reactor projects range from the development of evolutionary and advanced light water reactor (LWR) designs to initial work to develop even further advanced designs which go beyond LWR technology (e.g. high-temperature gas-cooled reactors and liquid metal-cooled reactors). These advanced designs include a greater use of advanced technology and safety features than those employed in currently operating plants or approved designs. The objectives of the workshop were to: - facilitate early identification and resolution of safety issues by developing a consensus among participating countries on the identification of safety issues, the scope of research needed to address these issues and a potential approach to their resolution; - promote the preservation of knowledge and expertise on advanced reactor technology; - provide input to the Generation IV International Forum Technology Road-map. In addition, the workshop tried to link advancement of knowledge and understanding of advanced designs to the regulatory process, with emphasis on building public confidence. It also helped to document current views on advanced reactor safety and technology, thereby contributing to preserving knowledge and expertise before it is lost. (author)

Assessment of basic safety issues

International Nuclear Information System (INIS)

Queniart, D.

1996-01-01

Work on the French-German common safety approach for future nuclear power plants continued in 1994 to allow for more detailed discussion of some major issues, taking into account the options provided by the industry for the EPR (European Pressurized water Reactor) project, as described in the document entitled 'Conceptual Safety Features Review File'. Seven meetings of a GPR/RSK advisory experts subgroup, six GPR/RSK plenary sessions and six meetings of the safety authorities (DFD) dealt with the following topics: design of the systems and use of probabilistic approaches, application of a 'break preclusion' approach to the main primary pipings, protection against external hazards (aircraft crashes, explosions, earthquakes), provisions with respect to accidents involving core melt and to containment design, radiological consequences of reference accidents and accidents involving core melt at low pressure. The important aspects of the joint policy are recalled in the presentation. The whole set of GPR/RSK recommendations were agreed by the French and German safety authorities during the DFD meetings of 1994 and early 1995. The utilities decided to begin the basic design phase in February, 1995. Work is now continuing to develop the common French-German approach for future nuclear power plants, in the same way as before. In 1995, this mainly covers the design of the containment and of the systems, but also new issues such as the protection against secondary side overpressurization, radiological protection of workers and radioactive wastes. (J.S.). 3 figs., 1 tab

Light Water Reactor Generic Safety Issues Database (LWRGSIDB). User's manual

International Nuclear Information System (INIS)

1999-01-01

The IAEA Conference on 'The Safety of Nuclear Power: Strategy for the Future' in 1991 was a milestone in nuclear safety. The objective of this conference was to review nuclear power safety issues for which achieving international consensus would be desirable, to address concerns on nuclear safety and to formulate recommendations for future actions by national and international authorities to advance nuclear safety to the highest level. Two of the important items addressed by this conference were ensuring and enhancing safety of operating plants and treatment of nuclear power plants built to earlier safety standards. Some of the publications related to these two items that have been issued subsequent to this conference are: A Common Basis for Judging the Safety of Nuclear Power Plants Built to Earlier Standards, INSAG-8 (1995), the IAEA Safety Guide 50-SG-O12, Periodic Safety Review of Operational Nuclear Power Plants (1994) and IAEA Safety Reports Series No. 12, Evaluation of the Safety of Operating Nuclear Power Plants Built to Earlier Standards: A Common Basis for Judgement (1998). Some of the findings of the 1991 conference have not yet been fully addressed. An IAEA Symposium on Reviewing the Safety of Existing Nuclear Power Plants in 1996 showed that there is an urgent need for operating organizations and national authorities to review those operating nuclear power plants which do not reach the high safety levels of the vast majority of plants and to undertake improvements with assistance from the international community if required. Safety reviews of operating nuclear power plants take on added importance in the context of the Convention on Nuclear Safety and its implementation. In order to perform safety reviews and to reassess the safety of operating nuclear power plants in a uniform manner, it is imperative to have an internationally accepted reference. Existing guidance needs to be complemented by a list of safety issues which have been encountered and

Current safety issues of CANDU licensing

International Nuclear Information System (INIS)

Lee, Y.; Natalizio, A.

1994-01-01

As requested by Korea Institute of Nuclear Safety(KINS), the status of five generic licensing issues has been examined and their potential impact on a new plant that would be constructed in Canada has been evaluated. The results and conclusions of this evaluation are summarized as follows: steam explosion in calandria, hydrogen explosion in containment, use of PSA in reactor licensing, human factors, safety critical software

Safety issue resolution strategy plan for inactive miscellaneous underground storage tanks

International Nuclear Information System (INIS)

Wang, O.S.; Powers, T.B.

1994-09-01

The purpose of this strategy plan is to identify, confirm, and resolve safely issues associated with inactive miscellaneous underground storage tanks (MUSTs) using a risk-based priority approach. Assumptions and processes to assess potential risks and operational concerns are documented in this report. Safety issue priorities are ranked based on a number of considerations including risk ranking and cost effectiveness. This plan specifies work scope and recommends schedules for activities related to resolving safety issues, such as collecting historical data, searching for authorization documents, performing Unreviewed Safety Question (USQ) screening and evaluation, identifying safety issues, imposing operational controls and monitoring, characterizing waste contents, mitigating and resolving safety issues, and fulfilling other remediation requirements consistent with the overall Tank Waste Remediation System strategy. Recommendations for characterization and remediation are also recommended according to the order of importance and practical programmatic consideration

A prioritization of generic safety issues. Supplement 21, Revision insertion instructions

Energy Technology Data Exchange (ETDEWEB)

None, None

1996-12-31

The report presents the safety priority ranking for generic safety issues related to nuclear power plants. The purpose of these rankings is to assist in the timely and efficient allocation of NRC resources for the resolution of those safety issues that have a significant potential for reducing risk. The safety priority rankings are HIGH, MEDIUM, LOW, and DROP, and have been assigned on the basis of risk significance estimates, the ratio of risk to costs and other impacts estimated to result if resolution of the safety issues were implemented, and the consideration of uncertainties and other quantitative or qualitative factors. To the extent practical, estimates are quantitative.

A prioritization of generic safety issues. Supplement 21, Revision insertion instructions

International Nuclear Information System (INIS)

1996-01-01

The report presents the safety priority ranking for generic safety issues related to nuclear power plants. The purpose of these rankings is to assist in the timely and efficient allocation of NRC resources for the resolution of those safety issues that have a significant potential for reducing risk. The safety priority rankings are HIGH, MEDIUM, LOW, and DROP, and have been assigned on the basis of risk significance estimates, the ratio of risk to costs and other impacts estimated to result if resolution of the safety issues were implemented, and the consideration of uncertainties and other quantitative or qualitative factors. To the extent practical, estimates are quantitative.

Safety of research reactors. Topical issues paper no. 4

International Nuclear Information System (INIS)

Alcala-Ruiz, F.; Ferraz-Bastos, J.L.; Kim, S.C.; Voth, M.; Boeck, H.; Dimeglio, F.; Litai, D.

2001-01-01

Assessment of Research Reactors (INSARR) missions. The prime objective of these missions has been to conduct a comprehensive operational safety review of the research reactor facility and to verify compliance with the IAEA Safety Standards. The methods used during an INSARR mission have been collected and analysed. Some of the important issues identified are the following: general ageing of the facility; uncertain status of many research reactors (in extended shutdown); indefinite deferral of return to operation or decommissioning; inadequate regulatory supervision; insufficient systematic (periodic) reassessment of safety; lack of quality assurance (QA) programmes; lack of an international safety convention or arrangement; lack of financial support for safety measures (e.g. safety reassessment, safety upgrading, decommissioning) and utilization; lack of clear utilization programmes; inadequate emergency preparedness; inadequate safety documentation (e.g. safety analysis report, operating rules and procedures, emergency plan); inadequate funding of shutdown reactors; weak safety culture; loss of expertise and corporate memory; loss of information concerning radioactive materials contained in retired experimental devices stored in the facility indefinitely; obsolescence of equipment and lack of spare parts; inadequate training and qualifications of regulators and operators; safety implications of new fuel types. These issues have been addressed by the IAEA Secretariat and the chairman of the International Nuclear Safety Advisory Group (INSAG). INSAG has identified three major safety issues that are: the increasing age of research reactors, the number of research reactors that are not operating anymore but have not been decommissioned, and the number of research reactors in countries that do not have appropriate regulatory authorities. This issue paper discusses the concerns generated by an analysis of the results of INSARR missions and those expressed by INSAG. The

Guidelines for nuclear-power-plant safety-issue-prioritization information development

International Nuclear Information System (INIS)

Andrews, W.B.; Gallucci, R.H.V.; Heaberlin, S.W.; Bickford, W.E.; Konzek, G.J.; Strenge, D.L.; Smith, R.I.; Weakley, S.A.

1983-02-01

Pacific Northwest Laboratory has developed a methodology, with examples, to calculate - to an approximation serviceable for prioritization purposes - the risk, dose and cost impacts of implementing resolutions to reactor safety issues. This report is an applications guide to issue-specific calculations. A description of the approach, mathematical models, worksheets and step-by-step examples are provided. Analysis using this method is intended to provide comparable results for many issues at a cost of two staff-weeks per issue. Results will be used by the NRC to support decisions related to issue priorities in allocation of resources to complete safety issue resolutions

A prioritization of generic safety issues. Supplement 19, Revision insertion instructions

International Nuclear Information System (INIS)

1995-11-01

The report presents the safety priority ranking for generic safety issues related to nuclear power plants. The purpose of these rankings is to assist in the timely and efficient allocation of NRC resources for the resolution of those safety issues that have a significant potential for reducing risk. The safety priority rankings are HIGH, MEDIUM, LOW, and DROP, and have been assigned on the basis of risk significance estimates, the ratio of risk to costs and other impacts estimated to result if resolution of the safety issues were implemented, and the consideration of uncertainties and other quantitative or qualitative factors. To the extent practical, estimates are quantitative. This document provides revisions and amendments to the report

A prioritization of generic safety issues. Supplement 19, Revision insertion instructions

Energy Technology Data Exchange (ETDEWEB)

None

1995-11-01

The report presents the safety priority ranking for generic safety issues related to nuclear power plants. The purpose of these rankings is to assist in the timely and efficient allocation of NRC resources for the resolution of those safety issues that have a significant potential for reducing risk. The safety priority rankings are HIGH, MEDIUM, LOW, and DROP, and have been assigned on the basis of risk significance estimates, the ratio of risk to costs and other impacts estimated to result if resolution of the safety issues were implemented, and the consideration of uncertainties and other quantitative or qualitative factors. To the extent practical, estimates are quantitative. This document provides revisions and amendments to the report.

Issues of Safety and Security: New Challenging to Malaysia Tourism Industry

OpenAIRE

Mohd Ayob Norizawati; Masron Tarmiji

2014-01-01

The safety and security issues nowadays become one of the forces causing changes in tourism industry in era of millennium. The main concern of this issues more focus on crime rates, terrorism, food safety, health issues and natural disaster. This topic gained the popularity in tourism research after 9/11 tragedy and since then the academicians and practitioners started seeking the best solution in ways to mitigate these negative impacts. For Malaysia, the image as safety and secure destinatio...

Guidelines for nuclear-power-plant safety-issue prioritization information development

International Nuclear Information System (INIS)

Andrews, W.B.; Gallucci, R.H.V.; Konzek, G.J.

1983-05-01

This is the second in a series of reports to document the use of a methodology developed by the Pacific Northwest Laboratory to calculate, for prioritization purposes, the risk, dose and cost impacts of implementing resolutions to reactor safety issues. This report contains results of issue-specific analyses for 15 issues. Each issue was considered within the contraints of available information as of September 1982 and two staff-weeks of labor. The results will be referenced, as one consideration in setting priorities for reactor safety issues, in an NRC prioritization report to be published at a future date

Guidelines for nuclear power plant safety issue prioritization information development. Supplement 2

International Nuclear Information System (INIS)

Andrews, W.B.; Gallucci, R.H.V.; Konzek, G.J.; Heaberlin, S.W.; Fecht, B.A.; Allen, C.H.; Allen, R.D.; Bickford, W.E.; Carbaugh, E.H.; Lewis, J.R.

1983-12-01

This is the third in a series of reports to document the use of a methodology developed by the Pacific Northwest Laboratory to calculate, for prioritization purposes, the risk, dose and cost impacts of implementing resolutions to reactor safety issues (NUREG/CR-2800, Andrews et al. 1983). This report contains results of issue-specific analyses for 31 issues. Each issue was considered within the constraints of available information as of summer 1983, and two staff-weeks of labor. The results are referenced, as one consideration in setting priorities for reactor safety issues, in NUREG-0933, A Prioritization of Generic Safety Issues

Topical issues in nuclear, radiation and radioactive waste safety. Contributed papers

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-08-01

The IAEA International Conference on Topical Issues in Nuclear, Radiation and Radioactive Waste Safety was held in Vienna, Austria, 30 August - 4 September 1998 with the objective to foster the exchange of information on topical issues in nuclear, radiation and radioactive waste safety, with the aim of consolidating an international consensus on: the present status of these issues; priorities for future work; and needs for strengthening international co-operation, including recommendations for the IAEA`s future activities. The document includes 43 papers presented at the Conference dealing with the following topical issues: Safety Management; Backfitting, Upgrading and Modernization of NPPs; Regulatory Strategies; Occupational Radiation Protection: Trends and Developments; Situations of Chronic Exposure to Residual Radioactive Materials: Decommissioning and Rehabilitation and Reclamation of Land; Radiation Safety in the Far Future: The Issue of Long Term Waste Disposal. A separate abstract and indexing were provided for each paper. Refs, figs, tabs

Topical issues in nuclear, radiation and radioactive waste safety. Contributed papers

International Nuclear Information System (INIS)

1998-08-01

The IAEA International Conference on Topical Issues in Nuclear, Radiation and Radioactive Waste Safety was held in Vienna, Austria, 30 August - 4 September 1998 with the objective to foster the exchange of information on topical issues in nuclear, radiation and radioactive waste safety, with the aim of consolidating an international consensus on: the present status of these issues; priorities for future work; and needs for strengthening international co-operation, including recommendations for the IAEA's future activities. The document includes 43 papers presented at the Conference dealing with the following topical issues: Safety Management; Backfitting, Upgrading and Modernization of NPPs; Regulatory Strategies; Occupational Radiation Protection: Trends and Developments; Situations of Chronic Exposure to Residual Radioactive Materials: Decommissioning and Rehabilitation and Reclamation of Land; Radiation Safety in the Far Future: The Issue of Long Term Waste Disposal. A separate abstract and indexing were provided for each paper

An interagency space nuclear propulsion safety policy for SEI - Issues and discussion

Science.gov (United States)

Marshall, A. C.; Sawyer, J. C., Jr.

1991-01-01

An interagency Nuclear Safety Policy Working Group (NSPWG) was chartered to recommend nuclear safety policy, requirements, and guidelines for the Space Exploration Initiative nuclear propulsion program to facilitate the implementation of mission planning and conceptual design studies. The NSPWG developed a top level policy to provide the guiding principles for the development and implementation of the nuclear propulsion safety program and the development of Safety Functional Requirements. In addition, the NSPWG reviewed safety issues for nuclear propulsion and recommended top level safety requirements and guidelines to address these issues. Safety topics include reactor start-up, inadvertent criticality, radiological release and exposure, disposal, entry, safeguards, risk/reliability, operational safety, ground testing, and other considerations. In this paper the emphasis is placed on the safety policy and the issues and considerations that are addressed by the NSPWG recommendations.

Keeping nurse researchers safe: workplace health and safety issues.

Science.gov (United States)

Barr, Jennieffer; Welch, Anthony

2012-07-01

This article is a report of a qualitative study of workplace health and safety issues in nursing research. Researcher health and safety have become increasing concerns as there is an increased amount of research undertaken in the community and yet there is a lack of appropriate guidelines on how to keep researchers safe when undertaking fieldwork. This study employed a descriptive qualitative approach, using different sources of data to find any references to researcher health and safety issues. A simple descriptive approach to inquiry was used for this study. Three approaches to data collection were used: interviews with 15 researchers, audits of 18 ethics applications, and exploration of the literature between 1992 and 2010 for examples of researcher safety issues. Data analysis from the three approaches identified participant comments, narrative descriptions or statements focused on researcher health and safety. Nurse researchers' health and safety may be at risk when conducting research in the community. Particular concern involves conducting sensitive research where researchers are physically at risk of being harmed, or being exposed to the development of somatic symptoms. Nurse researchers may perceive the level of risk of harm as lower than the actual or potential harm present in research. Nurse researchers do not consistently implement risk assessment before and during research. Researcher health and safety should be carefully considered at all stages of the research process. Research focusing on sensitive data and vulnerable populations need to consider risk minimization through strategies such as appropriate researcher preparation, safety during data collection, and debriefing if required. © 2012 Blackwell Publishing Ltd.

Questionnaire responses concerning safety issues in MR examination

International Nuclear Information System (INIS)

Yamaguchi-Sekino, Sachiko; Nakai, Toshiharu; Muranaka, Hiroyuki

2011-01-01

Recently, the rising numbers of medical implants and scanners with higher static magnetic field have increased safety concerns for magnetic resonance (MR) examination. To determine future safety focus, we distributed anonymous questionnaires to 3250 members of the Japanese Society for Magnetic Resonance in Medicine (JSMRM) and received 978 responses. Safety issues on the questionnaire concentrated on the handling of patients with implants (Q7-18, appendix), acoustic trauma due to scanning (Q19-21, appendix), and MR compatibility within the scanner room (Q22-25, appendix). Ninety-three percent of respondents indicated they had encountered cases with implants or medical materials of unknown MR compatibility; 21.7% reported heating problems and 15.0%, nerve stimulation problems, in patients with implants during MR examination. Although 88.7% of respondents recognized the term ''MR compatibility'', 68.2% indicated limited detailed understanding of the term. Eleven percent had had cases with suspected acoustic injury from MR scanner noise. Scanner noise levels were not clarified in any way in 37.4% cases, but 69.5% applied ear protection to patients. Labeling of ''MR compatibility'' of equipment brought into the MR scanner room was reported by 71.9%. More than 50% experienced MR compatibility issues related to equipment brought into the MR scanner room. With regard to safety issues on metallic objects which are implanted in MR workers, 88.1% indicated they would continue current operations even the implant is inside the body. Respondents identified lectures and seminars by professional societies, safety training by manufacturers, and information from the Internet and literature as the 3 main sources for up-dating safety information for MR examination. (author)

Characterization strategy report for the organic safety issues

International Nuclear Information System (INIS)

Goheen, S.C.; Campbell, J.A.; Fryxell, G.E.

1997-08-01

This report describes a logical approach to resolving potential safety issues resulting from the presence of organic components in hanford tank wastes. The approach uses a structured logic diagram (SLD) to provide a pathway for quantifying organic safety issue risk. The scope of the report is limited to selected organics (i.e., solvents and complexants) that were added to the tanks and their degradation products. The greatest concern is the potential exothermic reactions that can occur between these components and oxidants, such as sodium nitrate, that are present in the waste tanks. The organic safety issue is described in a conceptual model that depicts key modes of failure-event reaction processes in tank systems and phase domains (domains are regions of the tank that have similar contents) that are depicted with the SLD. Applying this approach to quantify risk requires knowing the composition and distribution of the organic and inorganic components to determine (1) how much energy the waste would release in the various domains, (2) the toxicity of the region associated with a disruptive event, and (3) the probability of an initiating reaction. Five different characterization options are described, each providing a different level of quality in calculating the risks involved with organic safety issues. Recommendations include processing existing data through the SLD to estimate risk, developing models needed to link more complex characterization information for the purpose of estimating risk, and examining correlations between the characterization approaches for optimizing information quality while minimizing cost in estimating risk

Consideration of social scientific issues in a safety case. Final report

International Nuclear Information System (INIS)

Sailer, Michael; Kallenbach-Herbert, Beate; Brohmann, Bettina; Spieth-Achtnich, Angelika

2010-01-01

The research outcome presented here - a model for identifying and describing safety-relevant social scientific issues - provides a scientific basis for addressing these issues in a safety case. In order for them to be implemented in a repository process, it would be necessary to elaborate in greater detail the initial conceptual foundations that have been laid in this research project in line with the project's terms of reference. The requisite elaboration relates to binding rules for designing the repository process, particularly with regard to the stages in which the safety case is to be developed during planning, approval, construction and operation through to repository closure. Such detailed elaboration also needs to involve specifying the extent to which each social scientific issue and sub-issue is to be addressed in the different stages. Consideration would need to be given not only to the relevance of the issue for a given stage but also to the various options and methods for providing proof of safety. It would be possible to draw on experiences with handling safety management in nuclear power plants - a sphere in which over the last ten years efforts have been ongoing to develop methods for presentation by the operator and review by the authorities. Furthermore, it is likely that the social scientific issues relevant to a safety case cannot be defined once and for all in a single process, but that the need for continual revision and adaptation will arise due to both the increasing knowledge acquired during the course of the repository process and the experiences and expectations of stakeholders (similarly to experiences in the sphere of scientific-technological requirements). Appropriate conditions need to be defined for such a process. This process could be supported by implementing the option mentioned above whereby a regulatory definition of safety management for geological disposal is formulated which encompasses all safety-relevant social scientific

Safety issues for superconducting fusion magnets

International Nuclear Information System (INIS)

Hsieh, S.Y.; Reich, M.; Powell, J.R.

1978-01-01

Safety issues for future superconducting fusion magnet systems are examined. It is found that safety and failure experience with existing superconducting magnets is not very applicable to predictions as to the safety and reliability of fusion magnets. Such predictions will have to depend on analysis and judgement for many years to come, rather than on accumulated experience. A number of generic potential structural, thermal-hydraulic, and electrical safety problems are identified and analyzed. Prevention of quenches and non-uniform temperature distributions, if quenches should occur, is of great importance, since such events can trigger processes which lead to magnet damage or failure. Engineered safety features will be necessary for fusion magnets. Two of these, an energy dispersion system and external coil containment, appear capable of reducing the probability of coil disruption to very low levels. However, they do not prevent loss of function accidents which are of economic concern. Elaborate detector, temperature equalization, and energy removal systems will be required to minimize the chances of loss of function accidents

Verification and validation issues for digitally-based NPP safety systems

International Nuclear Information System (INIS)

Ets, A.R.

1993-01-01

The trend toward standardization, integration and reduced costs has led to increasing use of digital systems in reactor protection systems. While digital systems provide maintenance and performance advantages, their use also introduces new safety issues, in particular with regard to software. Current practice relies on verification and validation (V and V) to ensure the quality of safety software. However, effective V and V must be done in conjunction with a structured software development process and must consider the context of the safety system application. This paper present some of the issues and concerns that impact on the V and V process. These include documentation of systems requirements, common mode failures, hazards analysis and independence. These issues and concerns arose during evaluations of NPP safety systems for advanced reactor designs and digital I and C retrofits for existing nuclear plants in the United States. The pragmatic lessons from actual systems reviews can provide a basis for further refinement and development of guidelines for applying V and V to NPP safety systems. (author). 14 refs

Critical safety issues in the design of fusion machines

International Nuclear Information System (INIS)

Kramer, W.

1991-01-01

In the course of developing fusion machines both general safety considerations and safety assessments for the various components and systems of actual machines increase in number and become more and more coherent. This is particularly true for the NET/ITER projects where safety analysis plays an increasing role for the design of the machine. Since in a D/T tokamak the radiological hazards will be dominant basic radiological safety objectives are discussed. Critical safety issues as identified in particular by the NET/ITER community are reviewed. Subsequently, issues of major concern are considered both for normal operation and for conceivable accidents. The following accidents are considered to be crucial: Loss of cooling in plasma facing components, loss of vacuum, tritium system failure, and magnet system failure. To mitigate accident consequences a confinement concept based on passive features and multiple barriers including detritiation and filtering has to be applied. The reactor building as final barrier needs special attention to cope with both internal and external hazards. (orig.)

Nuclear power systems: Their safety. Current issue review

International Nuclear Information System (INIS)

Myers, L.C.

1994-04-01

Human beings utilize energy in many forms and from a variety of sources. A number of countries have chosen nuclear-electric generation as a component of their energy system. At the end of 1992, there were 419 power reactors operating in 29 countries, accounting for more than 15% of the world's production of electricity. In 1992, 13 countries derived at least 25% of their electricity from nuclear units, with Lithuania leading at just over 78%, followed closely by France at 72%. In the same year, Canada produced about 16% of its electricity from nuclear units. Some 53 power reactors are under construction in 14 countries outside the former USSR. Within the ex-USSR countries, six new reactors are currently under construction. No human endeavour carries the guarantee of perfect safety and the question of whether of not nuclear-electric generation represents an 'acceptable' risk to society has long been vigorously debated. Until the events of late April 1986 in the then Soviet Union, nuclear safety had indeed been an issue for discussion, for some concern, but not for alarm. The accident at the Chernobyl reactor irrevocably changed all that. This disaster brought the matter of nuclear safety into the public mind in a dramatic fashion. Subsequent opening of the ex-Soviet nuclear power program to outside scrutiny has done little to calm people's concerns about the safety of nuclear power in that part of the world. This paper discusses the issue of safety in complex energy systems and provides brief accounts of some of the most serious reactor accidents that have occurred to date, as well as more recent, less dramatic events touching on the safety issue. (author). 7 refs

Safety issues at the defense production reactors

International Nuclear Information System (INIS)

1987-01-01

The United States produces plutonium and tritium for use in nuclear weapons at the defense production reactors - the N Reactor in Washington and the Savannah River reactors in South Carolina. This report reaches general conclusions about the management of those reactors and highlights a number of safety and technical issues that should be resolved. The report provides an assessment of the safety management, safety review, and safety methodology employed by the Department of Energy and the private contractors who operate the reactors for the federal government. This report examines the safety objective established by the Department of Energy for the production reactors and the process the Department of its contractors use to implement the objective; focuses on a variety of uncertainties concerning the production reactors, particularly those related to potential vulnerabilities to severe accidents; and identifies ways in which the DOE approach to management of the safety of the production reactors can be improved

Tank 241-C-103 organic vapor and liquid characterization and supporting activities, Hanford Site, Richland, Washington

International Nuclear Information System (INIS)

1993-01-01

The action proposed is to sample the vapor space and liquid waste and perform other supporting activities in Tank 241-C-103 located in the 241-C Tank Farm on the Hanford Site. Operations at Tank 241-C-103 are curtailed because of an unreviewed safety question (USQ) concerning flammability issues of the organic waste in the tank. This USQ must be resolved before normal operation and surveillance of the tank can resume. In addition to the USQ, Tank 241-C-103 is thought to be involved in several cases of exposure of individuals to noxious vapors. This safety issue requires the use of supplied air for workers in the vicinity of the tank. Because of the USQ, the US Department of Energy proposes to characterize the waste in the vapor space and the organic and aqueous layers, to determine the volume of the organic layer. This action is needed to: (1) assess potential risks to workers, the public, and the environment from continued routine tank operations and (2) provide information on the waste material in the tank to facilitate a comprehensive safety analysis of this USQ. The information would be used to determine if a flammable condition within the tank is credible. This information would be used to prevent or mitigate an accident during continued waste storage and future waste characterization. Alternatives to the proposed activities have been considered in this analysis

Vapor and gas sampling of single-shell tank 241-U-104 using the in situ vapor sampling system

International Nuclear Information System (INIS)

Lockrem, L.L.

1997-01-01

The Vapor Issue.Resolution Program tasked the Vapor Team (VT) to collect representative headspace samples from Hanford Site single-shell tank (SST) 241-U-104. This document presents In Situ Vapor Sampling System (ISVS) data resulting from the July 16, 1996 sampling of SST 241-U-104. Analytical results will be presented in separate reports issued by the Pacific Northwest National Laboratory (PNNL) which supplied and analyzed the sample media

Vapor and gas sampling of single-shell tank 241-S-103 using the in situ vapor sampling system

International Nuclear Information System (INIS)

Lockrem, L.L.

1997-01-01

The Vapor Issue Resolution Program tasked the Vapor Team (VT) to collect representative headspace samples from Hanford Site single-shell tank (SST) 241-S-103. This document presents In Situ Vapor Sampling System (ISVS) data resulting from the June 12, 1996 sampling of SST 241-S-103. Analytical results will be presented in separate reports issued by the Pacific Northwest National Laboratory (PNNL) which supplied and analyzed the sample media

Vapor and gas sampling of single-shell tank 241-S-106 using the in situ vapor sampling system

International Nuclear Information System (INIS)

Lockrem, L.L.

1997-01-01

The Vapor Issue Resolution Program tasked the Vapor Team (VT) to collect representative headspace samples from Hanford Site single-shell tank (SST) 241-S-106. This document presents In Situ vapor Sampling System (ISVS) data resulting from the June 13, 1996 sampling of SST 241-S-106. Analytical results will be presented in separate reports issued by the Pacific Northwest National Laboratory (PNNL) which'supplied and analyzed the sample media

Current safety issues related to research reactor operation

International Nuclear Information System (INIS)

Alcala-Ruiz, F.

2000-01-01

The Agency has included activities on research reactor safety in its Programme and Budget (P and B) since its inception in 1957. Since then, these activities have traditionally been oriented to fulfil the Agency's functions and obligations. At the end of the decade of the eighties, the Agency's Research Reactor Safety Programme (RRSP) consisted of a limited number of tasks related to the preparation of safety related publications and the conduct of safety missions to research reactor facilities. It was at the beginning of the nineties when the RRSP was upgraded and expanded as a subprogramme of the Agency's P and B. This subprogramme continued including activities related to the above subjects and started addressing an increasing number of issues related to the current situation of research reactors (in operation and shut down) around the world such as reactor ageing, modifications and decommissioning. The present paper discusses some of the above issues as recognised by various external review or advisory groups (e.g., Peer Review Groups under the Agency's Performance Programme Appraisal System (PPAS) or the standing International Nuclear Safety Advisory Group (INSAG)) and the impact of their recommendations on the preparation and implementation of the part of the Agency's P and B relating to the above subject. (author)

Health, safety and environmental issues in thin film manufacturing

NARCIS (Netherlands)

Alsema, E.A.; Baumann, A.E.; Hill, R.; Patterson, M.H.

1997-01-01

An investigation is made of Health, Safety and Environmental (HSE) aspects for the manufacturing, use and decommissioning of CdTe, CIS and a-Si modules. Issues regarding energy requirements, resource availability, emissions of toxic materials, occupational health and safety and module waste

Draft report on compilation of generic safety issues for light water reactor nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-07-01

A generally accepted approach to characterizing the safety concerns in nuclear power plants is to express them as safety issues which need to be resolved. When such safety issues are applicable to a generation of plants of a particular design or to a family of plants of similar design, they are termed generic safety issues. Examples of generic safety issues are those related to reactor vessel embrittlement, control rod insertion reliability or strainer clogging. The safety issues compiled in this document are based on broad international experience. This compilation is one element in the framework of IAEA activities to assist Member States in reassessing the safety of operating nuclear power plants. Refs.

Draft report on compilation of generic safety issues for light water reactor nuclear power plants

International Nuclear Information System (INIS)

1997-07-01

A generally accepted approach to characterizing the safety concerns in nuclear power plants is to express them as safety issues which need to be resolved. When such safety issues are applicable to a generation of plants of a particular design or to a family of plants of similar design, they are termed generic safety issues. Examples of generic safety issues are those related to reactor vessel embrittlement, control rod insertion reliability or strainer clogging. The safety issues compiled in this document are based on broad international experience. This compilation is one element in the framework of IAEA activities to assist Member States in reassessing the safety of operating nuclear power plants. Refs

Relevant safety issues in designing the HTR-10 reactor

International Nuclear Information System (INIS)

Sun Yuliang; Xu Yuanghui

2001-01-01

The HTR-10 is a 10 MWth pebble bed high temperature gas cooled reactor being constructed as a research facility at the Institute of Nuclear Energy Technology. This paper discusses design issues of the HTR-10 which are related to safety. It addresses the safety criteria used in the development and assessment of the design, the safety important systems, and the safety classification of components. It also summarises the results of safety analysis, including the approach used for the radioactive source term, as well as the approach to containment design. (author)

Analysis of high burnup fuel safety issues

Energy Technology Data Exchange (ETDEWEB)

Lee, Chan Bock; Kim, D. H.; Bang, J. G.; Kim, Y. M.; Yang, Y. S.; Jung, Y. H.; Jeong, Y. H.; Nam, C.; Baik, J. H.; Song, K. W.; Kim, K. S

2000-12-01

Safety issues in steady state and transient behavior of high burnup LWR fuel above 50 - 60 MWD/kgU were analyzed. Effects of burnup extension upon fuel performance parameters was reviewed, and validity of both the fuel safety criteria and the performance analysis models which were based upon the lower burnup fuel test results was analyzed. It was found that further tests would be necessary in such areas as fuel failure and dispersion for RIA, and high temperature cladding corrosion and mechanical deformation for LOCA. Since domestic fuels have been irradiated in PWR up to burnup higher than 55 MWD/kgU-rod. avg., it can be said that Korea is in the same situation as the other countries in the high burnup fuel safety issues. Therefore, necessary research areas to be performed in Korea were derived. Considering that post-irradiation examination(PIE) for the domestic fuel of burnup higher than 30 MWD/kgU has not been done so far at all, it is primarily necessary to perform PIE for high burnup fuel, and then simulation tests for RIA and LOCA could be performed by using high burnup fuel specimens. For the areas which can not be performed in Korea, international cooperation will be helpful to obtain the test results. With those data base, safety of high burnup domestic fuels will be confirmed, current fuel safety criteria will be re-evaluated, and finally transient high burnup fuel behavior analysis technology will be developed through the fuel performance analysis code development.

Analysis of high burnup fuel safety issues

International Nuclear Information System (INIS)

Lee, Chan Bock; Kim, D. H.; Bang, J. G.; Kim, Y. M.; Yang, Y. S.; Jung, Y. H.; Jeong, Y. H.; Nam, C.; Baik, J. H.; Song, K. W.; Kim, K. S

2000-12-01

Safety issues in steady state and transient behavior of high burnup LWR fuel above 50 - 60 MWD/kgU were analyzed. Effects of burnup extension upon fuel performance parameters was reviewed, and validity of both the fuel safety criteria and the performance analysis models which were based upon the lower burnup fuel test results was analyzed. It was found that further tests would be necessary in such areas as fuel failure and dispersion for RIA, and high temperature cladding corrosion and mechanical deformation for LOCA. Since domestic fuels have been irradiated in PWR up to burnup higher than 55 MWD/kgU-rod. avg., it can be said that Korea is in the same situation as the other countries in the high burnup fuel safety issues. Therefore, necessary research areas to be performed in Korea were derived. Considering that post-irradiation examination(PIE) for the domestic fuel of burnup higher than 30 MWD/kgU has not been done so far at all, it is primarily necessary to perform PIE for high burnup fuel, and then simulation tests for RIA and LOCA could be performed by using high burnup fuel specimens. For the areas which can not be performed in Korea, international cooperation will be helpful to obtain the test results. With those data base, safety of high burnup domestic fuels will be confirmed, current fuel safety criteria will be re-evaluated, and finally transient high burnup fuel behavior analysis technology will be developed through the fuel performance analysis code development

Commercial truck parking and other safety issues.

Science.gov (United States)

2015-10-01

Commercial truck parking is a safety issue, since trucks are involved in approximately 10% of all fatal accidents on interstates and : parkways in Kentucky. Drivers experience schedule demands and long hours on the road, yet they cannot easily determ...

Status report on resolution of Waste Tank Safety Issues at the Hanford Site. Revision 1

International Nuclear Information System (INIS)

Dukelow, G.T.; Hanson, G.A.

1995-05-01

The purpose of this report is to provide and update the status of activities supporting the resolution of waste tank safety issues and system deficiencies at the Hanford Site. This report provides: (1) background information on safety issues and system deficiencies; (2) a description of the Tank Waste Remediation System and the process for managing safety issues and system deficiencies; (3) changes in safety issue description, prioritization, and schedules; and (4) a summary of the status, plans, order of magnitude, cost, and schedule for resolving safety issues and system deficiencies

Quadrant I RCRA Facility investigation work plan: Health and safety plan

International Nuclear Information System (INIS)

1990-01-01

This report describes occupational health and safety issues at the Portsmouth Gaseous Diffusion Plant. Health effects from exposure to chemicals, vapors, drilling and sampling activities, as well as from ionizing radiations and protective measures are discussed

Safety issues with bisphosphonate therapy for osteoporosis

DEFF Research Database (Denmark)

Suresh, Ernest; Pazianas, Michael; Abrahamsen, Bo

2014-01-01

Randomized controlled trials have demonstrated the efficacy of bisphosphonates (BP) in improving BMD and reducing fracture risk. Various safety issues that were not noted in clinical trials have, however, now emerged with post-marketing surveillance and increasing clinical experience. The risk...

Safety issues on advanced fuel

Energy Technology Data Exchange (ETDEWEB)

Gross, H.; Krebs, W.D. [Siemens AG, Bereich Energieerzeugug (KWU), Erlangen (Germany). Geschaeftsgebiet Nukleare Energieerzeugung

1998-05-01

In the recent years a general discussion has started whether unsolved safety issues are related to advanced fuel. Advanced fuel is in this context a summary of features like high burnup, improved clad materials, low leakage loading pattern with high peaking factors etc. The design basis accidents RIA and Loca are of special interest for this discussion. From the Siemens point of view RIA is not a safety issue. There are sufficient margins between the enthalpy rise calculated by modern 3D methods and the fuel failures which occurred in RIA simulation tests when the effect of pulse width is taken into account. The evaluation of possible uncertainties for the established Loca criteria (17% equivalent corrosion, 1200 C clad temperature) for high burnup makes sense. But fuel with high burnup has significantly lower peaking factors than fuel with lower burnup. This gives sufficient margin counterbalancing possible uncertainties. In contrast to the above incomplete control rod insertion at higher burnup is potentially a real safety issue. Although Siemens fuel was not affected by the reported incidents they addressed the problem and checked that they have sufficient design margin for their fuel. (orig.) [Deutsch] In den letzten Jahren hat eine allgemeine Diskussion begonnen, ob mit fortgeschrittenen Brennelementen (BE) ungeklaerte Sicherheitsprobleme verbunden sind. Dabei ist `Fortgeschrittene Brennelemente` ein Sammelbegriff fuer hohe Abbraende, verbesserte Huellrohrmaterialien, Low-leakage-Einsatzplanungen mit hohen Heissstellenfaktoren usw. Die Auslegungsstoerfaelle RIA und Loca sind in dieser Diskussion von besonderer Bedeutung. Aus der Sicht von Siemens ist der RIA kein Sicherheitsproblem. Zwischen den mit modernen 3D-Methoden berechneten Enthalpieerhoehungen und den in RIA-Experimenten aufgetretenen Brennstabdefekten bestehen ausreichende Abstaende, wenn der Einfluss der Pulsbreite beruecksichtigt wird. Die Untersuchung eventueller Unsicherheiten bei hohen

Safety culture and organizational issues during transition from operation to decommissioning of NPPs

International Nuclear Information System (INIS)

Slavcheva, K.; Mori, M.; D'Amico, N.; Sollima, C.

2005-01-01

The paper highlights the critical safety issues in a Nuclear Power Plant (NPP) to be managed during the transition period from operation to decommissioning. Pre-shutdown is an important period of a NPP lifetime due to the changes and issues to be faced by the NPP management, which include safety culture issues, organizational issues, plant safety issues and nuclear waste issues. Preservation of staff competence and moral, management and organizational capability, preservation of knowledge and corporate memory, preservation of safety culture, surveillance and permanent control to maintain adequate level of nuclear and radiation safety, development of appropriate solutions for the new incoming issues are the key challenges to be timely faced. The uncertainty regarding the future of the site, the future of the workers and the incoming re-organization originate numerous additional issues including stress for the personnel. It is necessary to take appropriate actions to reduce the uncertainty. The regulatory regime continues with the same rules as during operation. Responsibility for safety remains with the licensee and the regulatory supervision continues and oversees the safe operation and security of the NPP, the safe management and storage of spent nuclear fuel and radioactive waste. Anticipated attention from the Operator and the Regulator to key organizational and safety culture issues during the pre-shutdown phase has shown to be an effective preventive action. The Operator has to aim to preserve staff competence and motivation, preserve corporate memory, safety culture, reinforce monitoring and control on the health risk of workers and population, preserve the technical part of the organization from external disturb and distractions, ensure transparency and develop strategies to solve forthcoming issues. The Regulator has to aim to reorient its supervision, train its personnel and adapt its tools to the new situation, keep adequate presence onsite, keep dialogue

Safety Issues Concerning the Medical Use of Cannabis and Cannabinoids

Directory of Open Access Journals (Sweden)

Mark A Ware

2005-01-01

Full Text Available Safety issues are a major barrier to the use of cannabis and cannabinoid medications for clinical purposes. Information on the safety of herbal cannabis may be derived from studies of recreational cannabis use, but cannabis exposure and effects may differ widely between medical and recreational cannabis users. Standardized, quality-controlled cannabinoid products are available in Canada, and safety profiles of approved medications are available through the Canadian formulary. In the present article, the evidence behind major safety issues related to cannabis use is summarized, with the aim of promoting informed dialogue between physicians and patients in whom cannabinoid therapy is being considered. Caution is advised in interpreting these data, because clinical experience with cannabinoid use is in the early stages. There is a need for long-term safety monitoring of patients using cannabinoids for a wide variety of conditions, to further guide therapeutic decisions and public policy.

Petroleum Vapor - Field Technical

Science.gov (United States)

The screening approach being developed by EPA OUST to evaluate petroleum vapor intrusion (PVI) requires information that has not be routinely collected in the past at vapor intrusion sites. What is the best way to collect this data? What are the relevant data quality issues and ...

Waste tank vapor project: Vapor space characterization of waste tank 241-BY-104: Results from samples collected on June 24, 1994

International Nuclear Information System (INIS)

Clauss, T.W.; Ligotke, M.W.; McVeety, B.D.; Pool, K.H.; Lucke, R.B.; Fruchter, J.S.; Goheen, S.C.

1994-11-01

This report describes results of the analyses of tank-headspace samples taken from Hanford waste Tank 241-BY-104 (referred to as Tank BY-104) on June 24, 1994. The Pacific Northwest Laboratory (PNL) contracted with Westinghouse Hanford Company (WHC) to provide sampling devices and analyze inorganic and organic samples collected from the tank headspace. The sample job was designated S4019 and was performed by WHC on June 24, 1994 using the vapor sampling system (VSS). The results of the analyses are expected to be used in the determination of safety and toxicological issues related to the tank-headspace gas as described in the WHC report entitled Data Quality Objectives for Generic In-Tank Health and Safety Vapor Issue Resolution, WHC-SD-WM-DQO-002, Rev. 0. Sampling devices, including 16 sorbent trains (for inorganic analyses), and 5 SUMMA trademark canisters (for organic analyses), were supplied to the WHC sampling staff on June 20, 1994. Samples were taken (by WHC) on June 24. The samples were returned from the field on June 27. The inorganic samples delivered to PNL on chain-of-custody (COC) 006893 included 16 sorbent trains as described in Tables 2.2, 2.3, and 2.4. Additional inorganic blank spikes were obtained from related sample jobs. SUMMA trademark samples delivered to PNL on COC 006896 included one ambient air sample, one ambient-air sample through the sampling system, and three tank-headspace SUMMA trademark canister samples. The samples were inspected upon delivery to the 326/23B laboratory and logged into PNL laboratory record book 55408. Custody of the sorbent trains was transferred to PNL personnel performing the inorganic analysis and stored at refrigerated (≤10 degrees C) temperature until the time of analysis. Access to the 326/23B laboratory is limited to PNL personnel working on the waste-tank safety program

Ranking of safety issues for WWER-440 model 230 nuclear power plants

International Nuclear Information System (INIS)

1992-02-01

In response to requests from Member States operating Soviet designed WWER-440/230 nuclear power plants (NPPs) for assistance through the IAEA's nuclear safety services, a major international project was established to evaluate these first generation reactors as a complement to relevant ongoing national, bilateral and multilateral activities. The objective is to assist countries operating WWER-440/230 NPPs in performing comprehensive safety reviews aimed at identifying design and operational weaknesses. The scope of the project includes a review of the conceptual design of WWER-440/230 NPPs, safety review missions to each one of the operating reactors to review design and operational aspects and studies to resolve issues of generic safety concern. This report was prepared by a group of international experts and the IAEA staff and discussed by the Project Steering Committee, December 9-13, 1991 in Vienna. An overview of the safety issues identified is presented indicating their effect on the performance of the basic safety functions. Conceptual recommendations related to design issues are given as a technical basis for the safety modifications required

Climate and climate-related issues for the safety assessment SR-Can

International Nuclear Information System (INIS)

Naeslund, Jens-Ove

2006-11-01

The purpose of this report is to document current scientific knowledge of the climate-related conditions and processes relevant to the long-term safety of a KBS-3 repository to a level required for an adequate treatment in the safety assessment SR-Can. The report also includes a concise background description of the climate system. The report includes three main chapters: A description of the climate system (Chapter 2); Identification and discussion of climate-related issues (Chapter 3); and, A description of the evolution of climate-related conditions for the safety assessment (Chapter 4). Chapter 2 includes an overview of present knowledge of the Earth climate system and the climate conditions that can be expected to occur in Sweden on a 100,000 year time perspective. Based on this, climate-related issues relevant for the long-term safety of a KBS-3 repository are identified. These are documented in Chapter 3 'Climate-related issues' to a level required for an adequate treatment in the safety assessment. Finally, in Chapter 4, 'Evolution of climate-related conditions for the safety assessment' an evolution for a 120,000 year period is presented, including discussions of identified climate-related issues of importance for repository safety. The documentation is from a scientific point of view not exhaustive, since such a treatment is neither necessary for the purposes of the safety assessment nor possible within the scope of a safety assessment. As further described in the SR-Can Main Report and in the Features Events and Processes report, the content of the present report has been audited by comparison with FEP databases compiled in other assessment projects. This report follows as far as possible the template for documentation of processes regarded as internal to the repository system. However, the term processes is not used in this report, instead the term issue has been used. Each issue includes a set of processes together resulting in the behaviour of a

Climate and climate-related issues for the safety assessment SR-Can

Energy Technology Data Exchange (ETDEWEB)

Naeslund, Jens-Ove (comp.)

2006-11-15

The purpose of this report is to document current scientific knowledge of the climate-related conditions and processes relevant to the long-term safety of a KBS-3 repository to a level required for an adequate treatment in the safety assessment SR-Can. The report also includes a concise background description of the climate system. The report includes three main chapters: A description of the climate system (Chapter 2); Identification and discussion of climate-related issues (Chapter 3); and, A description of the evolution of climate-related conditions for the safety assessment (Chapter 4). Chapter 2 includes an overview of present knowledge of the Earth climate system and the climate conditions that can be expected to occur in Sweden on a 100,000 year time perspective. Based on this, climate-related issues relevant for the long-term safety of a KBS-3 repository are identified. These are documented in Chapter 3 'Climate-related issues' to a level required for an adequate treatment in the safety assessment. Finally, in Chapter 4, 'Evolution of climate-related conditions for the safety assessment' an evolution for a 120,000 year period is presented, including discussions of identified climate-related issues of importance for repository safety. The documentation is from a scientific point of view not exhaustive, since such a treatment is neither necessary for the purposes of the safety assessment nor possible within the scope of a safety assessment. As further described in the SR-Can Main Report and in the Features Events and Processes report, the content of the present report has been audited by comparison with FEP databases compiled in other assessment projects. This report follows as far as possible the template for documentation of processes regarded as internal to the repository system. However, the term processes is not used in this report, instead the term issue has been used. Each issue includes a set of processes together resulting in the

The Norwegian Plan of Action for nuclear safety issues

International Nuclear Information System (INIS)

1997-07-01

The Plan of Action underlies Norwegian activities in the field of international co-operation to enhance nuclear safety and prevent radioactive contamination from activities in Eastern Europe and the former Soviet Union. Geographically the highest priority has been given to support for safety measures in north-west Russia. This information brochure outlines the main content of the Plan of Action for nuclear safety issues and lists a number of associated measures and projects

The Norwegian Plan of Action for nuclear safety issues

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-07-01

The Plan of Action underlies Norwegian activities in the field of international co-operation to enhance nuclear safety and prevent radioactive contamination from activities in Eastern Europe and the former Soviet Union. Geographically the highest priority has been given to support for safety measures in north-west Russia. This information brochure outlines the main content of the Plan of Action for nuclear safety issues and lists a number of associated measures and projects.

Unresolved safety issues summary. Volume 3, Number 3. Aqua book

International Nuclear Information System (INIS)

1981-01-01

The 'Unresolved Safety Issues' summary is designed to provide the management of the Nuclear Regulatory Commission with a quarterly overview of the progress and plans for completion of generic tasks addressing Unresolved Safety Issues reported to Congress pursuant to section 210 of The Energy Reorganization Act of 1974 as amended. This summary utilizes data collected from the Office of Nuclear Reactor Regulation, Office of Nuclear Regulatory Research, and the National Laboratories and is prepared by the office of Management and Program Analysis. The definition of what constitutes completion of an unresolved safety issue (USI) has recently been expanded to include the implementation of the technical resolution. This is in acknowledgement of the fact that real safety benefits occur only after the implementation has taken place. The schedules in this book include a milestone at the end of each action plan which represents the initiation of the implementation process both with respect to incorporation of the technical resolution in the NRC official guidance or requirements and also the application of changes to individual operating plants. The schedule for implementation will not normally be included in the task action plan(s) for the resolution of a USI since the nature and extent of the activities necessary to accomplish the implementation cannot normally be reasonably determined prior to the determination of a technical resolution. The progress and status for implementation of unresolved safety issues for which a technical resolution has been completed are reported specifically in a separate table provided in this summary

Vapor and gas sampling of single-shell tank 241-B-102 using the in situ vapor sampling system

International Nuclear Information System (INIS)

Lockrem, L.L.

1997-01-01

The Vapor Issue Resolution Program tasked the Vapor Team (the team) to collect representative headspace samples from Hanford Site single-shell tank (SST) 241-B-102. This document presents sampling data resulting from the April 18, 1996 sampling of SST 241-B-102. Analytical results will be presented in a separate report issued by Pacific Northwest National Laboratory (PNNL), which supplied and analyzed the sampling media. The team, consisting of Sampling and Mobile Laboratories (SML) and Special Analytical Studies (SAS) personnel, used the vapor sampling system (VSS) to collect representative samples of the air, gases, and vapors from the headspace of SST 241-B-102 with sorbent traps and SUMMA canisters

Key practical issues in strengthening safety culture. INSAG-15. A report by the International Safety Advisory Group

International Nuclear Information System (INIS)

2002-01-01

This report describes the essential practical issues to be considered by organizations aiming to strengthen safety culture. It is intended for senior executives, managers and first line supervisors in operating organizations. Although safety culture cannot be directly regulated, it is important that members of regulatory bodies understand how their actions affect the development of attempts to strengthen safety culture and are sympathetic to the need to improve the less formal human related aspects of safety. The report is therefore of relevance to regulators, although not intended primarily for them. The International Nuclear Safety Advisory Group (INSAG) introduced the concept of safety culture in its INSAG-4 report in 1991. Since then, many papers have been written on safety culture, as it relates to organizations and individuals, its improvement and its underpinning prerequisites. Variations in national cultures mean that what constitutes a good approach to enhancing safety culture in one country may not be the best approach in another. However, INSAG seeks to provide pragmatic and practical advice of wide applicability in the principles and issues presented in this report. Nuclear and radiological safety are the prime concerns of this report, but the topics discussed are so general that successful application of the principles should lead to improvements in other important areas, such as industrial safety, environmental performance and, in some respects, wider business performance. This is because many of the attitudes and practices necessary to achieve good performance in nuclear safety, including visible commitment by management, openness, care and thoroughness in completing tasks, good communication and clarity in recognizing major issues and dealing with them as a priority, have wide applicability

Unresolved safety issues summary. Aqua Book. Volume 6, No. 3

International Nuclear Information System (INIS)

Butts, J.

1984-01-01

The unresolved safety issues summary is designed to provide the management of the Nuclear Regulatory Commission with a quarterly overview of the progress and plans for completion of generic tasks addressing unresolved safety issues reported to Congress pursuant to Section 210 of the Energy Reorganization Act of 1974 as amended. This summary utilizes data collected from the Office of Nuclear Reactor Regulation, Office of Nuclear Regulatory Research, and the national laboratories and is prepared by the Office of Nuclear Reactor Regulation

Guidelines for nuclear power plant safety issue prioritization information development. Supplement 5

International Nuclear Information System (INIS)

Daling, P.M.; Lavender, J.C.

1996-07-01

This is the sixth in a series of reports to document the development and use of a methodology developed by the Pacific Northwest Laboratory (PNL) to calculate, for prioritization purposes, the risk, dose, and cost impacts of implementing potential resolutions to reactor safety issues (see NUREG/CR-2800, Andrews, et al., 1983). This report contains the results of issue-specific analyses for 34 generic issues. Each issue was considered within the constraints of available information at the time the issues were examined and approximately 2 staff-weeks of labor. The results are referenced as one consideration in NUREG-0933, A Prioritization of Generic Safety Issues (Emrit, et al., 1983)

Guidelines for nuclear power plant safety issue prioritization information development. Supplement 5

Energy Technology Data Exchange (ETDEWEB)

Daling, P.M.; Lavender, J.C. [Pacific Northwest National Lab., Richland, WA (United States)

1996-07-01

This is the sixth in a series of reports to document the development and use of a methodology developed by the Pacific Northwest Laboratory (PNL) to calculate, for prioritization purposes, the risk, dose, and cost impacts of implementing potential resolutions to reactor safety issues (see NUREG/CR-2800, Andrews, et al., 1983). This report contains the results of issue-specific analyses for 34 generic issues. Each issue was considered within the constraints of available information at the time the issues were examined and approximately 2 staff-weeks of labor. The results are referenced as one consideration in NUREG-0933, A Prioritization of Generic Safety Issues (Emrit, et al., 1983).

Safety Culture and Issue in the Malaysian Manufacturing Sector

OpenAIRE

Ali Danish; Yusof Yusri; Adam Anbia

2017-01-01

. This paper highlights the Safety culture and issue in the Malaysian Manufacturing Sector and emphasis the high occupational accidents due to lack of safety culture and non-compliance of the requirements of Occupational Safety and Health Act 1994. The aim of this study is to review the occupational accidents occurrence in the Malaysia workplace since 2012-2016. Malaysia aimed to reduce the occupational accidents, the results show by DOSH increase that Occupational Noise Induced Hearing Loss ...

Key issues of the common French-German safety approach for future PWRs

International Nuclear Information System (INIS)

Frisch, W.; Rohde, J.; Gros, G.; Queniart, D.

1996-01-01

The general common safety approach issued in May 1993 contains safety objectives, general principles and already some technical principles. Based on general safety approach, detailed recommendations have been developed in 1994 on key issues such as: system design and use of PSA; integrity of the primary circuit; external hazards; severe accidents and containment design; radiological consequences of reference accidents and low pressure core melt accidents. A selection of the detailed recommendations is presented in the full paper. (author)

Application of a methodology to determine priorities for nuclear power plant safety issues

International Nuclear Information System (INIS)

Daling, P.M.

1988-01-01

The Nuclear Regulatory Commission (NRC) Office of Nuclear Regulatory Research (RES) is sponsoring a research program to determine priorities of nuclear power plant safety issues. A methodology has been developed at the Pacific Northwest Laboratory (PNL) to provide technical assistance in the development of risk and cost estimates for implementing resolutions to the safety issues. The information development methods are intended to provide the NRC with a consistent level of information for use in ranking the issues. The NRC uses this information, along with judgmental factors, to rank the issues for further consideration by the NRC staff. The primary purpose of the priority rankings are to assist in the allocation of resources to issues that have high potential for reducing public risk as well as to remove issues from further consideration that have little safety significance

Analysis of safety issues in household meat consumption in Odeda ...

African Journals Online (AJOL)

The study analyzed the safety problems with household meat consumption in Odeda Local Government Area, Ogun state, Nigeria. The objectives were to describe the socioeconomic characteristics of the respondents; assess the level of awareness of safety issues in households' meat consumption; and evaluate the ...

Divertor armour issues: lifetime, safety and influence on ITER performance

International Nuclear Information System (INIS)

Pestchanyi, S.

2009-01-01

Comprehensive simulations of the ITER divertor armour vaporization and brittle destruction under ELMs of different sizes have revealed that the erosion rate of CFC armour is intolerable for an industrial reactor, but it can be considerably reduced by the armour fibre structure optimization. The ITER core contamination with carbon is tolerable for medium size ELMs, but large type I ELM can run the confinement into the disruption. Erosion of tungsten, an alternative armour material, under ELMs influence is satisfactory, but the danger of the core plasma contamination with tungsten is still not enough understood and potentially it could be very dangerous. Vaporization of tungsten, its cracking and dust production during ELMs are rather urgent issues to be investigated for proper choice of the divertor armour material for ITER. However, the erosion rate under action of the disruptive heat loads is tolerable for both armour materials assuming few hundred disruptions falls out during ITER lifetime

Safety issues of nuclear production of hydrogen

International Nuclear Information System (INIS)

Piera, Mireia; Martinez-Val, Jose M.; Jose Montes, Ma

2006-01-01

Hydrogen is not an uncommon issue in Nuclear Safety analysis, particularly in relation to severe accidents. On the other hand, hydrogen is a household name in the chemical industry, particularly in oil refineries, and is also a well known chemical element currently produced by steam reforming of natural gas, and other methods (such as coal gasification). In the not-too-distant future, hydrogen will have to be produced (by chemical reduction of water) using renewable and nuclear energy sources. In particular, nuclear fission seems to offer the cheapest way to provide the primary energy in the medium-term. Safety principles are fundamental guidelines in the design, construction and operation both of hydrogen facilities and nuclear power plants. When these two technologies are integrated, a complete safety analysis must consider not only the safety practices of each industry, but any interaction that could be established between them. In particular, any accident involving a sudden energy release from one of the facilities can affect the other. Release of dangerous substances (chemicals, radiotoxic effluents) can also pose safety problems. Although nuclear-produced hydrogen facilities will need specific approaches and detailed analysis on their safety features, a preliminary approach is presented in this paper. No significant roadblocks are identified that could hamper the deployment of this new industry, but some of the hydrogen production methods will involve very demanding safety standards

Safety issues at the defense production reactors

International Nuclear Information System (INIS)

1987-01-01

The United States produces plutonium and tritium for use in nuclear weapons at the defense production reactors endash the N Reactor in Washington and the Savannah River reactors in South Carolina. This report reaches general conclusions about the management of those reactors and highlights a number of safety and technical issues that should be resolved. The report provides an assessment of the safety management, safety review, and safety methodology employed by the Department of Energy and the private contractors who operate the reactors for the federal government. The report is necessarily based on a limited review of the defense production reactors. It does not address whether any of the reactors are ''safe,'' because such an analysis would involve a determination of acceptable risk endash a matter of obvious importance, but one that was beyond the purview of the committee. It also does not address whether the safety of the production reactors is comparable to that of commercial nuclear power stations, because even this narrower question extended beyond the charge to the committee and would have involved detailed analyses that the committee could not undertake

Contrast media. Safety issues and ESUR guidelines. 2. rev. ed.

Energy Technology Data Exchange (ETDEWEB)

Thomsen, Henrik S. [Copenhagen University Hospital, Herlev (Denmark). Dept. of Diagnostic Radiology; Copenhagen Univ., Herlev (Denmark). Dept. of Diagnostic Sciences; Webb, Judith A.W. (eds.) [St. Bartholomew' s Hospital London Univ. (United Kingdom). Dept. of Radiology

2009-07-01

In 1994 the European Society of Urogenital Radiology (ESUR) set up a committee to consider the safety of contrast media used for diagnostic imaging. Subsequently the committee questioned members, reviewed the literature, proposed guidelines and discussed these proposals with participants at the annual symposia of the society. The end result of this work was the successful first edition of this book, published in 2006. This second edition not only updates the previous edition, but also contains some completely new chapters, for example on gadolinium-based contrast agents, meta-analyses in contrast media research and various regulatory issues. Comprehensive consideration is given to the many different safety issues relating to iodinated, MR, ultrasound and barium contrast media. The text includes chapters on both acute and delayed non-renal adverse reactions and on renal adverse reactions. All those questions frequently raised in radiological practice are addressed, and the well-known ESUR guidelines on contrast media are included. This book, presented in a handy, easy to use format, provides an invaluable, unique and unparalleled source of information on the safety issues relating to contrast media. (orig.)

Contribution of safety issues to public perceptions of energy systems

International Nuclear Information System (INIS)

Otway, H.J.; Thomas, K.

1978-01-01

Public opposition is an important consideration for those responsible for energy planning; however, the formulation of socially viable policies requires an understanding of the reasons for this opposition. An attitude model was applied to identify the underlying determinants of public perceptions of five energy systems: nuclear, coal, oil, solar and hydro. Empirical results (heterogeneous sample of the general public, N = 224) are reported in which these energy systems were found to be perceived in terms of four basic dimensions: psychological aspects; economic benefits; socio-political implications; environmental and physical safety issues. For the total sample, safety issues made an appreciable contribution to attitudes toward all of the systems except nuclear energy, where it was not significant. A differential analysis of two sub-samples, those respondents PRO and CON nuclear energy, showed that benefits and safety issues were important determinants of PRO attitudes while CON attitudes were primarily due to psychological aspects and concerns about personal and political power. The role of technical information in the formation of public attitudes toward technological policies is discussed

Contrast media. Safety issues and ESUR guidelines. 2. rev. ed.

International Nuclear Information System (INIS)

Thomsen, Henrik S.; Copenhagen Univ., Herlev; Webb, Judith A.W.

2009-01-01

In 1994 the European Society of Urogenital Radiology (ESUR) set up a committee to consider the safety of contrast media used for diagnostic imaging. Subsequently the committee questioned members, reviewed the literature, proposed guidelines and discussed these proposals with participants at the annual symposia of the society. The end result of this work was the successful first edition of this book, published in 2006. This second edition not only updates the previous edition, but also contains some completely new chapters, for example on gadolinium-based contrast agents, meta-analyses in contrast media research and various regulatory issues. Comprehensive consideration is given to the many different safety issues relating to iodinated, MR, ultrasound and barium contrast media. The text includes chapters on both acute and delayed non-renal adverse reactions and on renal adverse reactions. All those questions frequently raised in radiological practice are addressed, and the well-known ESUR guidelines on contrast media are included. This book, presented in a handy, easy to use format, provides an invaluable, unique and unparalleled source of information on the safety issues relating to contrast media. (orig.)

Workshop on Regulatory Review and Safety Assessment Issues in Repository Licensing

International Nuclear Information System (INIS)

Wilmot, Roger D.

2011-02-01

The workshop described here was organised to address more general issues regarding regulatory review of SKB's safety assessment and overall review strategy. The objectives of the workshop were: - to learn from other programmes' experiences on planning and review of a license application for a nuclear waste repository, - to offer newly employed SSM staff an opportunity to learn more about selected safety assessment issues, and - to identify and document recommendations and ideas for SSM's further planning of the licensing review

The contribution of safety issues to public perceptions of energy systems

International Nuclear Information System (INIS)

Otway, H.J.; Thomas, Kerry

1978-01-01

Public opposition is an important consideration for those responsible for energy planning. An attitude model was applied to identify the underlying determinants of public perceptions of five energy systems: nuclear, coal, oil, solar and hydro. Empirical results are reported in which these energy systems were found to be perceived in terms of four basic dimensions: psychological aspects; economics benefits; socio-political implications; environmental and physical safety issues. For the total sample, safety issues made an appreciable contribution to attitudes toward all of the systems except nuclear energy, where it was not significant. A differential analysis of two sub-samples, those respondents PRO and CON nuclear energy, showed that benefits and safety issues were important determinants of PRO attitudes while CON attitudes were primarily due to psychological aspects and concerns about personal and political power. The role of technical information in the formation of public attitudes toward technological policies is discussed [fr

ISSUES OF FETUS DRUG SAFETY

Directory of Open Access Journals (Sweden)

A.V. Ostrovskaya

2010-01-01

Full Text Available The article is focused on the issue of fetus drug safety. Development of a child’s health depends both on hereditary information and environment factors. The reason for deviation from the process of normal prenatal development could be any xenobiotics, physical factors and some medications having a pathogenic effect during pregnancy on the embryo and fetus. Due to that, the physician’s preventive work based on the knowledge of embryogenesis processes and critical development periods. Key words: teratogenic action, medications, prenatal development, congenital malformation, newborns, children.(Pediatric Pharmacology. – 2010; 7(1:25-28

Vapor and gas sampling of single-shell tank 241-BX-110 using the in situ vapor sampling system

International Nuclear Information System (INIS)

Lockrem, L.L.

1997-01-01

The Vapor Issue Resolution Program tasked the Vapor Team (the team) to collect representative headspace samples from Hanford Site single-shell tank (SST) 241-BX-110. This document presents sampling data resulting from the April 30, 1996 sampling of SST 241-BX-110. Analytical results will be presented in a separate report issued by Pacific Northwest National Laboratory (PNNL), which supplied and analyzed the sampling media

Non-technical issues in safety assessments for nuclear disposal facilities

International Nuclear Information System (INIS)

Kallenbach-Herbert, Beate; Brohmann, Bettina

2010-09-01

The paper highlights that a comprehensive approach to safety affords the consideration of technology, organisation, personnel and social environment. In several safety relevant contexts of nuclear waste disposal these fields are closely interrelated. The approach for the consideration of socio-scientific aspects which is sketched in this paper supports the systematic treatment of safety relevant non-technical issues in the safety case or in safety assessments for a disposal project. Furthermore it may foster the dialogue among specialists from the technical, the natural- and the socio-scientific field on questions of disposal safety. In this way it may contribute to a better understanding among the affected scientific disciplines in nuclear waste disposal.

Ethical and Safety Issues of Stem Cell-Based Therapy.

Science.gov (United States)

Volarevic, Vladislav; Markovic, Bojana Simovic; Gazdic, Marina; Volarevic, Ana; Jovicic, Nemanja; Arsenijevic, Nebojsa; Armstrong, Lyle; Djonov, Valentin; Lako, Majlinda; Stojkovic, Miodrag

2018-01-01

Results obtained from completed and on-going clinical studies indicate huge therapeutic potential of stem cell-based therapy in the treatment of degenerative, autoimmune and genetic disorders. However, clinical application of stem cells raises numerous ethical and safety concerns. In this review, we provide an overview of the most important ethical issues in stem cell therapy, as a contribution to the controversial debate about their clinical usage in regenerative and transplantation medicine. We describe ethical challenges regarding human embryonic stem cell (hESC) research, emphasizing that ethical dilemma involving the destruction of a human embryo is a major factor that may have limited the development of hESC-based clinical therapies. With previous derivation of induced pluripotent stem cells (iPSCs) this problem has been overcome, however current perspectives regarding clinical translation of iPSCs still remain. Unlimited differentiation potential of iPSCs which can be used in human reproductive cloning, as a risk for generation of genetically engineered human embryos and human-animal chimeras, is major ethical issue, while undesired differentiation and malignant transformation are major safety issues. Although clinical application of mesenchymal stem cells (MSCs) has shown beneficial effects in the therapy of autoimmune and chronic inflammatory diseases, the ability to promote tumor growth and metastasis and overestimated therapeutic potential of MSCs still provide concerns for the field of regenerative medicine. This review offers stem cell scientists, clinicians and patient's useful information and could be used as a starting point for more in-depth analysis of ethical and safety issues related to clinical application of stem cells.

Issue on NPP-I and C important to safety-Data Communication

International Nuclear Information System (INIS)

Koo, I. S.; Hong, S. B.; Cho, J. W.; Choi, Y. S.; Lee, J. C.

2010-01-01

1. Issue on CDV and FDIS of IEC61500 - Nuclear Power Plants - Instrumentation and control important to safety -Data communication - Activities on IEC TC45, SC45A/WGA3. 2. As issue the requirements for safety data communication which is essential part of digital I and C systems, the fundamental technology for IT based nuclear I and C is established. 3. Approval and circulation of IED61500 CDV and FDIS - Issue of the international standard, IEC 61500. 4. Issue one IEC61500, three interim documents, three presentations and five technical support to industry, and participation in IEC TC45 and SC45A plenary meeting and intermediate meeting on SC45A/WGA3. 5. Based on IEC61500, an new project on wireless technologyes application to NPP will be proceeded

Vapor characterization of Tank 241-C-103

International Nuclear Information System (INIS)

Huckaby, J.L.; Story, M.S.

1994-06-01

The Westinghouse Hanford Company Tank Vapor Issue Resolution Program has developed, in cooperation with Northwest Instrument Systems, Inc., Oak Ridge National Laboratory, Oregon Graduate Institute of Science and Technology, Pacific Northwest Laboratory, and Sandia National Laboratory, the equipment and expertise to characterize gases and vapors in the high-level radioactive waste storage tanks at the Hanford Site in south central Washington State. This capability has been demonstrated by the characterization of the tank 241-C-103 headspace. This tank headspace is the first, and for many reasons is expected to be the most problematic, that will be characterized (Osborne 1992). Results from the most recent and comprehensive sampling event, sample job 7B, are presented for the purpose of providing scientific bases for resolution of vapor issues associated with tank 241-C-103. This report is based on the work of Clauss et al. 1994, Jenkins et al. 1994, Ligotke et al. 1994, Mahon et al. 1994, and Rasmussen and Einfeld 1994. No attempt has been made in this report to evaluate the implications of the data presented, such as the potential impact of headspace gases and vapors to tank farm workers health. That and other issues will be addressed elsewhere. Key to the resolution of worker health issues is the quantitation of compounds of toxicological concern. The Toxicology Review Panel, a panel of Pacific Northwest Laboratory experts in various areas, of toxicology, has chosen 19 previously identified compounds as being of potential toxicological concern. During sample job 7B, the sampling and analytical methodology was validated for this preliminary list of compounds of toxicological concern. Validation was performed according to guidance provided by the Tank Vapor Conference Committee, a group of analytical chemists from academic institutions and national laboratories assembled and commissioned by the Tank Vapor Issue Resolution Program

Vapor characterization of Tank 241-C-103

Energy Technology Data Exchange (ETDEWEB)

Huckaby, J.L. [Westinghouse Hanford Co., Richland, WA (United States); Story, M.S. [Northwest Instrument Systems, Inc. Richland, WA (United States)

1994-06-01

The Westinghouse Hanford Company Tank Vapor Issue Resolution Program has developed, in cooperation with Northwest Instrument Systems, Inc., Oak Ridge National Laboratory, Oregon Graduate Institute of Science and Technology, Pacific Northwest Laboratory, and Sandia National Laboratory, the equipment and expertise to characterize gases and vapors in the high-level radioactive waste storage tanks at the Hanford Site in south central Washington State. This capability has been demonstrated by the characterization of the tank 241-C-103 headspace. This tank headspace is the first, and for many reasons is expected to be the most problematic, that will be characterized (Osborne 1992). Results from the most recent and comprehensive sampling event, sample job 7B, are presented for the purpose of providing scientific bases for resolution of vapor issues associated with tank 241-C-103. This report is based on the work of Clauss et al. 1994, Jenkins et al. 1994, Ligotke et al. 1994, Mahon et al. 1994, and Rasmussen and Einfeld 1994. No attempt has been made in this report to evaluate the implications of the data presented, such as the potential impact of headspace gases and vapors to tank farm workers health. That and other issues will be addressed elsewhere. Key to the resolution of worker health issues is the quantitation of compounds of toxicological concern. The Toxicology Review Panel, a panel of Pacific Northwest Laboratory experts in various areas, of toxicology, has chosen 19 previously identified compounds as being of potential toxicological concern. During sample job 7B, the sampling and analytical methodology was validated for this preliminary list of compounds of toxicological concern. Validation was performed according to guidance provided by the Tank Vapor Conference Committee, a group of analytical chemists from academic institutions and national laboratories assembled and commissioned by the Tank Vapor Issue Resolution Program.

Safety issues and updates under MR environments

Energy Technology Data Exchange (ETDEWEB)

Kim, Soo Jung; Kim, Kyung Ah, E-mail: bellenina@daum.net

2017-04-15

Highlights: • Unexpected biological effects can occur within stronger magnetic fields. • MR safety for MR conditional items is not guaranteed beyond the tested conditions. • Updated knowledge about MR-related safety is important for a safe MR environment. - Abstract: Magnetic resonance (MR) imaging is a useful imaging tool with superior soft tissue contrast for diagnostic evaluation. The MR environments poses unique risks to patients and employees differently from ionizing radiation exposure originated from computed tomography and plain x-ray films. The technology associated with MR system has evolved continuously since its introduction in the late 1970s. MR systems have advanced with static magnetic fields, faster and stronger gradient magnetic fields and more powerful radiofrequency transmission coils. Higher field strengths of MR offers greater signal to noise capability and better spatial resolution, resulting in better visualization of anatomic detail, with a reduction in scan time. With the rapid evolution of technology associated with MR, we encounter new MR-related circumstances and unexpected dangerous conditions. A comprehensive update of our knowledge about MR safety is necessary to prevent MR-related accidents and to ensure safety for patients and staff associated with MR. This review presents an overview about MR-related safety issues and updates.

Key practical issues in strengthening safety culture. INSAG-15. A report by the International Safety Advisory Group [Russian Edition

International Nuclear Information System (INIS)

2015-01-01

This report describes the essential practical issues to be considered by organizations aiming to strengthen safety culture. It is intended for senior executives, managers and first line supervisors in operating organizations. Although safety culture cannot be directly regulated, it is important that members of regulatory bodies understand how their actions affect the development of attempts to strengthen safety culture and are sympathetic to the need to improve the less formal human related aspects of safety. The report is therefore of relevance to regulators, although not intended primarily for them. The International Nuclear Safety Advisory Group (INSAG) introduced the concept of safety culture in its INSAG-4 report in 1991. Since then, many papers have been written on safety culture, as it relates to organizations and individuals, its improvement and its underpinning prerequisites. Variations in national cultures mean that what constitutes a good approach to enhancing safety culture in one country may not be the best approach in another. However, INSAG seeks to provide pragmatic and practical advice of wide applicability in the principles and issues presented in this report. Nuclear and radiological safety are the prime concerns of this report, but the topics discussed are so general that successful application of the principles should lead to improvements in other important areas, such as industrial safety, environmental performance and, in some respects, wider business performance. This is because many of the attitudes and practices necessary to achieve good performance in nuclear safety, including visible commitment by management, openness, care and thoroughness in completing tasks, good communication and clarity in recognizing major issues and dealing with them as a priority, have wide applicability

Workshop on Regulatory Review and Safety Assessment Issues in Repository Licensing

Energy Technology Data Exchange (ETDEWEB)

Wilmot, Roger D. (Galson Sciences Limited (United Kingdom))

2011-02-15

The workshop described here was organised to address more general issues regarding regulatory review of SKB's safety assessment and overall review strategy. The objectives of the workshop were: - to learn from other programmes' experiences on planning and review of a license application for a nuclear waste repository, - to offer newly employed SSM staff an opportunity to learn more about selected safety assessment issues, and - to identify and document recommendations and ideas for SSM's further planning of the licensing review

Generic safety issues for nuclear power plants with light water reactors and measures taken for their resolution

International Nuclear Information System (INIS)

1998-09-01

The IAEA Conference on 'The Safety of Nuclear Power: Strategy for the Future' in 1991 was a milestone in nuclear safety. Two of the important items addressed by this conference were ensuring and enhancing safety of operating plants and treatment of nuclear power plants built to earlier safety standards. A number of publications related to these two items issued subsequent to this conference were: A Common Basis for Judging the Safety of Nuclear Power Plants Built to Earlier Standards, INSAG-9 (1995), the IAEA Safety Guide 50-SG-O12, periodic Safety Review of Operational Nuclear Power Plants (1994) and an IAEA publication on the Safety Evaluation of Operating Nuclear Power Plants Built to Earlier Standards - A Common Basis for Judgement (1997). Some of the findings of the 1991 Conference have not yet been fully addressed. An IAEA Symposium on reviewing the Safety of Existing Nuclear Power Plants in 1996 showed that there is an urgent need for operating organizations and national authorities to review operating nuclear power plants which do not meet the high safety levels of the vast majority of plants and to undertake improvements with assistance from the international community if required. Safety reviews of operating nuclear power plants take on added importance in the context of the Convention on Nuclear safety and its implementation. The purpose of this TECDOC compilation based on broad international experience, is to assist the Member States in the reassessment of operating plants by providing a list of generic safety issues identified in nuclear power plants together with measures taken to resolve these issues. These safety issues are generic in nature with regard to light water reactors and the measures for their resolution are for use as a reference for the safety reassessment of operating plants. The TECDOC covers issues thought to be significant to Member States based on consensus process. It provides an introduction to the use of generic safety issues for

U.S. Food System Working Conditions as an Issue of Food Safety.

Science.gov (United States)

Clayton, Megan L; Smith, Katherine C; Pollack, Keshia M; Neff, Roni A; Rutkow, Lainie

2017-02-01

Food workers' health and hygiene are common pathways to foodborne disease outbreaks. Improving food system jobs is important to food safety because working conditions impact workers' health, hygiene, and safe food handling. Stakeholders from key industries have advanced working conditions as an issue of public safety in the United States. Yet, for the food industry, stakeholder engagement with this topic is seemingly limited. To understand this lack of action, we interviewed key informants from organizations recognized for their agenda-setting role on food-worker issues. Findings suggest that participants recognize the work standards/food safety connection, yet perceived barriers limit adoption of a food safety frame, including more pressing priorities (e.g., occupational safety); poor fit with organizational strategies and mission; and questionable utility, including potential negative consequences. Using these findings, we consider how public health advocates may connect food working conditions to food and public safety and elevate it to the public policy agenda.

14 CFR 414.35 - Public notification of the criteria by which a safety approval was issued.

Science.gov (United States)

2010-01-01

... issued. For each grant of a safety approval, the FAA will publish in the Federal Register a notice of the... which a safety approval was issued. 414.35 Section 414.35 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION LICENSING SAFETY APPROVALS Safety...

Ethical issues in patient safety: Implications for nursing management.

Science.gov (United States)

Kangasniemi, Mari; Vaismoradi, Mojtaba; Jasper, Melanie; Turunen, Hannele

2013-12-01

The purpose of this article is to discuss the ethical issues impacting the phenomenon of patient safety and to present implications for nursing management. Previous knowledge of this perspective is fragmented. In this discussion, the main drivers are identified and formulated in 'the ethical imperative' of patient safety. Underlying values and principles are considered, with the aim of increasing their visibility for nurse managers' decision-making. The contradictory nature of individual and utilitarian safety is identified as a challenge in nurse management practice, together with the context of shared responsibility and identification of future challenges. As a conclusion, nurse managers play a strategic role in patient safety. Their role is to incorporate ethical values of patient safety into decision-making at all levels in an organization, and also to encourage clinical nurses to consider values in the provision of care to patients. Patient safety that is sensitive to ethics provides sustainable practice where the humanity and dignity of all stakeholders are respected.

Nuclear reactors safety issues

International Nuclear Information System (INIS)

Barre, Francois; Seiler, Nathalie

2008-01-01

Full text of publication follows: Since the seventies, economic incentives have led the utilities to drive a permanent evolution of the light water reactor (LWR). The evolution deals with the reactor designs as well as the way to operate them in a more flexible manner. It is for instance related to the fuel technologies and management. On the one hand, the technologies are in continuous evolution, such as the fuel pellets (MOX, Gd fuel, or Cr doped fuels..) as well as advanced cladding materials (M5 TM , MDA or ZIRLO). On the other hand, the fuel management is also subject to continuous evolution in particular in terms of increasing the level of burn-up, the reactor (core) power, the enrichment, as well as the duration of reactor cycles. For instance, in a few years in France, the burn-up has raised beyond the value of 39 GWj/t, initially authorized up to 52 GWj/t for the UO 2 fuel. In the near future, utilities foreseen to reach fuel burn-up of 60 GWj/t for MOX fuel and 70 GWj/t for UO 2 fuel. Furthermore, the future reactor of fourth generation will use new fuels of advanced conception. Furthermore with the objective of improving the safety margins, methods and calculation tools used by the utilities in the elaboration of their safety demonstrations submitted to the Safety Authority, are in movement. The margin evaluation methodologies often consist of a calculation chain of best-estimate multi-field simulations (e.g. various codes being coupled to simulate in a realistic way the evolution of the thermohydraulic, neutronic and mechanic state of the reactor). The statistical methods are more and more sophisticated and the computer codes are integrating ever-complex physical models (e.g. three-dimensional at fine scale). Following this evolution, the Institute of Radioprotection and Nuclear Safety (IRSN), whose one of the roles is to examine the safety records and to rend a technical expertise, considers the necessity of reevaluating the safety issues for advanced

Safety culture issues and perspectives

International Nuclear Information System (INIS)

Dahlgren Persson, K.

1999-01-01

indicators, the symptoms and significance of shortcomings and degradation in the safety management processes and safety culture and hence failed to take effective corrective actions at an early stage. Key performance issues such as critical oversight, self assessment processes and effective corrective action programmes were not fully appreciated by senior management even after performance deficiencies were identified by the regulator and other external agencies. The seeming inability of the regulator to influence this senior management level, especially at the early stages of safety performance degradation was a major contributing factor in the continuation of the performance decline to the point that regulatory intervention became a necessity. Recovery processes commonly used a new utility senior management team to kick-start the change process and corresponding regulatory resource increases focused on monitoring the recovery. A comprehensive recovery plan and an interactive relationship with the regulator were deemed essential for a successful recovery. A review of the developing safety culture was a factor considered necessary to ensure sustainability. Public involvement in the regulatory monitoring process helped restore their confidence in the regulator, utility and plant management. The group recommended IAEA continue work to develop guidance for senior corporate management and regulators in this area (author) (ml)

Legislation for the countermeasures on special issues of nuclear safety regulations

International Nuclear Information System (INIS)

Cho, Byung Sun; Lee, Mo Sung; Chung, Gum Chun; Kim, Heon Jin; Oh, Ho Chul

2004-02-01

Since the present nuclear safety regulation has some legal problems that refer to special issues and contents of regulatory provisions, this report has preformed research on the legal basic theory of nuclear safety regulation to solve the problems. In addition, this report analyzed the problems of each provisions and suggested the revision drafts on the basis of analyzing problems and the undergoing theory of nuclear safety regulation

Legislation for the countermeasures on special issues of nuclear safety regulations

Energy Technology Data Exchange (ETDEWEB)

Cho, Byung Sun; Lee, Mo Sung; Chung, Gum Chun; Kim, Heon Jin; Oh, Ho Chul [Chongju Univ., Cheongju (Korea, Republic of)

2004-02-15

Since the present nuclear safety regulation has some legal problems that refer to special issues and contents of regulatory provisions, this report has preformed research on the legal basic theory of nuclear safety regulation to solve the problems. In addition, this report analyzed the problems of each provisions and suggested the revision drafts on the basis of analyzing problems and the undergoing theory of nuclear safety regulation.

Technical Issues and Proposes on the Legislation of Probabilistic Safety Assessment in Periodic Safety Review

International Nuclear Information System (INIS)

Hwang, Seok-Won; Jeon, Ho-Jun; Na, Jang-Hwan

2015-01-01

Korean Nuclear Power Plants have performed a comprehensive safety assessment reflecting design and procedure changes and using the latest technology every 10 years. In Korea, safety factors of PSR are revised to 14 by revision of IAEA Safety Guidelines in 2003. In the revised safety guidelines, safety analysis field was subdivided into deterministic safety analysis, PSA (Probabilistic safety analysis), and hazard analysis. The purpose to examine PSA as a safety factor on PSR is to make sure that PSA results and assumptions reflect the latest state of NPPs, validate the level of computer codes and analytical models, and evaluate the adequacy of PSA instructions. In addition, its purpose is to derive the plant design change, operating experience of other plants and safety enhancement items as well. In Korea, PSA is introduced as a new factor. Thus, the overall guideline development and long-term implementation strategy are needed. Today in Korea, full-power PSA model revision and low-power and shutdown (LPSD) PSA model development is being performed as a part of the post Fukushima action items for operating plants. The scope of the full-power PSA is internal/external level 1, 2 PSA. But in case of fire PSA, the scope is level 1 PSA using new method, NUREG/CR-6850. In case of LPSD PSA, level 1 PSA for all operating plants, and level 2 PSA for 2 demonstration plants are under development. The result of the LPSD PSA will be used as major input data for plant specific SAMG (Severe Accident Management Guideline). The scope of PSA currently being developed in Korea cannot fulfill 'All Mode, All Scope' requirements recommended in the IAEA Safety Guidelines. Besides the legislation of PSA, step-by-step development strategy for non-performed scopes such as level 3 PSA and new fire PSA is one of the urgent issues in Korea. This paper suggests technical issues and development strategies for each PSA technical elements.

Dust Combustion Safety Issues for Fusion Applications

Energy Technology Data Exchange (ETDEWEB)

L. C. Cadwallader

2003-05-01

This report summarizes the results of a safety research task to identify the safety issues and phenomenology of metallic dust fires and explosions that are postulated for fusion experiments. There are a variety of metal dusts that are created by plasma erosion and disruptions within the plasma chamber, as well as normal industrial dusts generated in the more conventional equipment in the balance of plant. For fusion, in-vessel dusts are generally mixtures of several elements; that is, the constituent elements in alloys and the variety of elements used for in-vessel materials. For example, in-vessel dust could be composed of beryllium from a first wall coating, tungsten from a divertor plate, copper from a plasma heating antenna or diagnostic, and perhaps some iron and chromium from the steel vessel wall or titanium and vanadium from the vessel wall. Each of these elements has its own unique combustion characteristics, and mixtures of elements must be evaluated for the mixture’s combustion properties. Issues of particle size, dust temperature, and presence of other combustible materials (i.e., deuterium and tritium) also affect combustion in air. Combustion in other gases has also been investigated to determine if there are safety concerns with “inert” atmospheres, such as nitrogen. Several coolants have also been reviewed to determine if coolant breach into the plasma chamber would enhance the combustion threat; for example, in-vessel steam from a water coolant breach will react with metal dust. The results of this review are presented here.

Application of the risk-based strategy to the Hanford tank waste organic-nitrate safety issue

International Nuclear Information System (INIS)

Hunter, V.L.; Colson, S.D.; Ferryman, T.; Gephart, R.E.; Heasler, P.; Scheele, R.D.

1997-12-01

This report describes the results from application of the Risk-Based Decision Management Approach for Justifying Characterization of Hanford Tank Waste to the organic-nitrate safety issue in Hanford single-shell tanks (SSTs). Existing chemical and physical models were used, taking advantage of the most current (mid-1997) sampling and analysis data. The purpose of this study is to make specific recommendations for planning characterization to help ensure the safety of each SST as it relates to the organic-nitrate safety issue. An additional objective is to demonstrate the viability of the Risk-Based Strategy for addressing Hanford tank waste safety issues

Application of the risk-based strategy to the Hanford tank waste organic-nitrate safety issue

Energy Technology Data Exchange (ETDEWEB)

Hunter, V.L.; Colson, S.D.; Ferryman, T.; Gephart, R.E.; Heasler, P.; Scheele, R.D.

1997-12-01

This report describes the results from application of the Risk-Based Decision Management Approach for Justifying Characterization of Hanford Tank Waste to the organic-nitrate safety issue in Hanford single-shell tanks (SSTs). Existing chemical and physical models were used, taking advantage of the most current (mid-1997) sampling and analysis data. The purpose of this study is to make specific recommendations for planning characterization to help ensure the safety of each SST as it relates to the organic-nitrate safety issue. An additional objective is to demonstrate the viability of the Risk-Based Strategy for addressing Hanford tank waste safety issues.

Ecological Issues Related to Children's Health and Safety

Science.gov (United States)

Aldridge, Jerry; Kohler, Maxie

2009-01-01

Issues concerning the health and safety of children and youth occur at multiple levels. Bronfenbrenner (1995) proposed an ecological systems approach in which multiple systems interact to enhance or diminish children's development. The same systems are at work in health promotion. The authors present and review articles that reflect the multiple…

Issues of Safety and Security: New Challenging to Malaysia Tourism Industry

Directory of Open Access Journals (Sweden)

Mohd Ayob Norizawati

2014-01-01

Full Text Available The safety and security issues nowadays become one of the forces causing changes in tourism industry in era of millennium. The main concern of this issues more focus on crime rates, terrorism, food safety, health issues and natural disaster. This topic gained the popularity in tourism research after 9/11 tragedy and since then the academicians and practitioners started seeking the best solution in ways to mitigate these negative impacts. For Malaysia, the image as safety and secure destination was tarnished a few years lately and new unfortunates incident in this year bring more damage to Malaysia image. Healthy issues, terrorism, Lahad Datu intrusion, repeated kidnapping and shooting in Sabah, twin airlines incident, riot and illegal demonstration and false reporting by international media brings new challenging to Malaysia. Although some incident may be had short-term impact to Malaysia tourism industry, but it’s still gave the big impact to Malaysia branding process. Many travellers and Malaysian itself still believe that Malaysia is a one of safer destination and country to visit and stayed in, but more outstanding efforts was require to make sure Malaysia tourism industry was capable to recover from this negative impact as soon as possible.

Resolution of the Hanford site ferrocyanide safety issue

International Nuclear Information System (INIS)

Cash, R.J.; Lilga, M.A.; Babad, H.

1997-01-01

The Ferrocyanide Safety Issue at the Hanford Site was officially resolved in December 1996. This paper summarizes the key activities that led to final resolution of this safety hazard, a process that began in 1990 after it and other safety concerns were identified for the underground high-level waste storage tanks at the Hanford Site. At the time little was known about ferrocyanide-nitrate/nitrite reactions and their potential to cause offsite releases of radioactivity. The ferrocyanide hazard was a perceived problem, but it took six years of intense studies and analyses of tank samples to prove that the problem no longer exists. The issue revolved around the fact that ferrocyanide and nitrate mixtures can be made to explode violently if concentrated, dry, and heated to temperatures of at least 250 degrees C. The studies conducted over the last six years have shown that the combined effects of temperature, radiation, and pH during 40 or more years of storage have destroyed almost all of the ferrocyanide originally added to tanks. This was shown in laboratory experiments using simulant wastes and confirmed by actual samples taken from the ferrocyanide tanks. The tank waste sludges are now too dilute to support a sustained exothermic reaction, even if dried out and heated to high temperatures. 2 tabs., 18 refs

NS [Nuclear Safety] update. Current safety and security activities and developments taking place in the Department of Nuclear Safety and Security, Issue no. 11, June 2009

International Nuclear Information System (INIS)

2009-06-01

The current issue presents information about the following topics: Nuclear Safety Review for the Year 2008; Feedback from IRS Topical Studies and Events Applied to Safety Standards; Education and Training Programmes at the IAEA Department of Nuclear Safety and Security; Peer Review of Operational Safety Performance (PROSPER)

Containment-emergency-sump performance. Technical findings related to Unresolved Safety Issue A-43

International Nuclear Information System (INIS)

1983-04-01

This report summarizes key technical findings related to the Unresolved Safety Issue A-43, Containment Emergency Sump Performance, and provides recommendations for resolution of attendant safety issues. The key safety questions relate to: (a) effects of insulation debris on sump performance; (b) sump hydraulic performance as determined by design features, submergence, and plant induced effects, and (c) recirculation pump performance wherein air and/or particulate ingestion can occur. The technical findings presented in this report provide information relevant to the design and performance evaluation of the containment emergency sump

Collegiate Aviation Research and Education Solutions to Critical Safety Issues

Science.gov (United States)

Bowen, Brent (Editor)

2002-01-01

This Conference Proceedings is a collection of 6 abstracts and 3 papers presented April 19-20, 2001 in Denver, CO. The conference focus was "Best Practices and Benchmarking in Collegiate and Industry Programs". Topics covered include: satellite-based aviation navigation; weather safety training; human-behavior and aircraft maintenance issues; disaster preparedness; the collegiate aviation emergency response checklist; aviation safety research; and regulatory status of maintenance resource management.

Current Therapeutic Cannabis Controversies and Clinical Trial Design Issues

Science.gov (United States)

Russo, Ethan B.

2016-01-01

This overview covers a wide range of cannabis topics, initially examining issues in dispensaries and self-administration, plus regulatory requirements for production of cannabis-based medicines, particularly the Food and Drug Administration “Botanical Guidance.” The remainder pertains to various cannabis controversies that certainly require closer examination if the scientific, consumer, and governmental stakeholders are ever to reach consensus on safety issues, specifically: whether botanical cannabis displays herbal synergy of its components, pharmacokinetics of cannabis and dose titration, whether cannabis medicines produce cyclo-oxygenase inhibition, cannabis-drug interactions, and cytochrome P450 issues, whether cannabis randomized clinical trials are properly blinded, combatting the placebo effect in those trials via new approaches, the drug abuse liability (DAL) of cannabis-based medicines and their regulatory scheduling, their effects on cognitive function and psychiatric sequelae, immunological effects, cannabis and driving safety, youth usage, issues related to cannabis smoking and vaporization, cannabis concentrates and vape-pens, and laboratory analysis for contamination with bacteria and heavy metals. Finally, the issue of pesticide usage on cannabis crops is addressed. New and disturbing data on pesticide residues in legal cannabis products in Washington State are presented with the observation of an 84.6% contamination rate including potentially neurotoxic and carcinogenic agents. With ongoing developments in legalization of cannabis in medical and recreational settings, numerous scientific, safety, and public health issues remain. PMID:27683558

Current Therapeutic Cannabis Controversies and Clinical Trial Design Issues.

Directory of Open Access Journals (Sweden)

Ethan Budd Russo

2016-09-01

Full Text Available This overview covers a wide range of cannabis topics, initially examining issue in dispensaries and self-administration, plus regulatory requirement for production of cannabis-based medicines, particularly the Food and Drug Administration Botanical Guidance. The remainder pertains to various cannabis controversies that certainly require closer examination if the scientific, consumer and governmental stakeholders are ever to reach consensus on safety issues, specifically: whether botanical cannabis displays herbal synergy of its components, pharmacokinetics of cannabis and dose titration, whether cannabis medicines produce cyclo-oxygenase inhibition, cannabis-drug interactions and cytochrome P450 issues, whether cannabis randomized clinical trials are properly blinded, combatting the placebo effect in those trials via new approaches, the drug abuse liability of cannabis-based medicines and their regulatory scheduling, their effects on cognitive function and psychiatric sequelae, immunological effects, cannabis and driving safety, youth usage, issues related to cannabis smoking and vaporization, cannabis concentrates and vape-pens, and laboratory analysis for contamination with bacteria and heavy metals. Finally, the issue of pesticide usage on cannabis crops is addressed. New and disturbing data on pesticide residues in legal cannabis products in Washington State are presented with the observation of an 84.6% contamination rate including potentially neurotoxic and carcinogenic agents. With ongoing developments in legalization of cannabis in medical and recreational settings, numerous scientific, safety and public health issues remain.

Emerging issues in occupational safety and health.

Science.gov (United States)

Schulte, Paul A

2006-01-01

In developed countries, changes in the nature of work and the workforce may necessitate recalibrating the vision of occupational safety and health (OSH) researchers, practitioners, and policymakers to increase the focus on the most important issues. New methods of organizing the workplace, extensive labor contracting, expansion of service and knowledge sectors, increase in small business, aging and immigrant workers, and the continued existence of traditional hazards in high-risk sectors such as construction, mining, agriculture, health care, and transportation support the need to address: 1) broader consideration of the role and impact of work, 2) relationship between work and psychological dysfunction, 3) increased surveillance basis for research and intervention, 4) overcoming barriers to the conduct and use of epidemiologic research, 5) information and knowledge transfer and application, 6) economic issues in prevention, and 7) the global interconnectedness of OSH. These issues are offered to spur thinking as new national research agendas for OSH are considered for developed countries.

Collegiate Aviation Research and Education Solutions to Critical Safety Issues. UNO Aviation Monograph Series. UNOAI Report.

Science.gov (United States)

Bowen, Brent, Ed.

This document contains four papers concerning collegiate aviation research and education solutions to critical safety issues. "Panel Proposal Titled Collegiate Aviation Research and Education Solutions to Critical Safety Issues for the Tim Forte Collegiate Aviation Safety Symposium" (Brent Bowen) presents proposals for panels on the…

Decommissioning: Regulatory activities and identification of key organizational and human factors safety issues

International Nuclear Information System (INIS)

Durbin, N.E.; Melber, B.D.; Lekberg, A.

2001-12-01

In the late 1990's the Swedish government decided to shut down Unit 1 of the Barsebaeck nuclear power plant. This report documents some of the efforts made by the Swedish Nuclear Power Inspectorate (SKI) to address human factors and organizational issues in nuclear safety during decommissioning of a nuclear facility. This report gives a brief review of the background to the decommissioning of Barsebaeck 1 and points out key safety issues that can arise during decommissioning. The main regulatory activities that were undertaken were requirements that the plant provide special safety reports on decommissioning focusing on first, the operation of both units until closure of Unit 1 and second, the operation of Unit 2 when Unit 1 was closed. In addition, SKI identified areas that might be affected by decommissioning and called these areas out for special attention. With regard to these areas of special attention, SKI required that the plant provide monthly reports on changing and emerging issues as well as self-assessments of the areas to be addressed in the special safety reports. Ten key safety issues were identified and evaluated with regard to different stages of decommissioning and with regard to the actions taken by Barsebaeck. Some key conclusions from SKI's experience in regulating a decommissioning nuclear power plant conclude the report

Safety in GPR prospecting: a rarely-considered issue

Science.gov (United States)

Persico, Raffaele; Pajewski, Lara; Trela, Christiane; Carrick Utsi, Erica

2016-04-01

Safety issues (of people first of all, but also of the equipment and environment) are rarely considered in Ground-Penetrating Radar (GPR) prospecting and, more in general, in near-surface geophysical prospecting. As is right and fully understandable, the scientific community devotes greatest attention first of all to the theoretical and practical aspects of GPR technique, affecting the quality of attainable results, secondly to the efforts and costs needed to achieve them [1-2]. However, the (luckily) growing GPR market and range of applications make it worth giving serious consideration to safety issues, too. The existing manuals dealing with safety in geophysics are mainly concerned with applications requiring "deep" geophysical prospecting, for example the search for oilfields and other hydrocarbon resources [3]. Near-surface geophysics involves less dangers than deep geophysics, of course. Nevertheless, several accidents have already happened during GPR experimental campaigns. We have personally had critical experiences and collected reliable testimonies concerning occurred problems as mountain sicks, fractures of legs, stomach problems, allergic reactions, encounters with potentially-dangerous animals, and more. We have also noticed that much more attention is usually paid to safety issues during indoor experimental activities (in laboratory), rather than during outdoor fieldworks. For example, the Italian National research Council is conventioned with safety experts who hold periodical seminaries about safety aspects. Having taken part to some of them, to our experience we have never heard a "lecture" devoted to outdoor prospecting. Nowadays, any aspects associated to the use of the technologies should be considered. The increasing sensibility and sense of responsibility towards environmental matters impose GPR end-users to be careful not to damage the environment and also the cultural heritage. Near-surface prospecting should not compromise the flora and

Current status of environmental, health, and safety issues of nickel metal-hydride batteries for electric vehicles

Energy Technology Data Exchange (ETDEWEB)

Corbus, D; Hammel, C J; Mark, J

1993-08-01

This report identifies important environment, health, and safety issues associated with nickel metal-hydride (Ni-MH) batteries and assesses the need for further testing and analysis. Among the issues discussed are cell and battery safety, workplace health and safety, shipping requirements, and in-vehicle safety. The manufacture and recycling of Ni-MH batteries are also examined. This report also overviews the ``FH&S`` issues associated with other nickel-based electric vehicle batteries; it examines venting characteristics, toxicity of battery materials, and the status of spent batteries as a hazardous waste.

Current status of environmental, health, and safety issues of nickel metal-hydride batteries for electric vehicles

International Nuclear Information System (INIS)

Corbus, D.; Hammel, C.J.; Mark, J.

1993-08-01

This report identifies important environment, health, and safety issues associated with nickel metal-hydride (Ni-MH) batteries and assesses the need for further testing and analysis. Among the issues discussed are cell and battery safety, workplace health and safety, shipping requirements, and in-vehicle safety. The manufacture and recycling of Ni-MH batteries are also examined. This report also overviews the ''FH ampersand S'' issues associated with other nickel-based electric vehicle batteries; it examines venting characteristics, toxicity of battery materials, and the status of spent batteries as a hazardous waste

Safety issues and their ranking for WWER-1000 model 320 nuclear power plants. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

International Nuclear Information System (INIS)

1996-03-01

The objective of this report is to present a consolidated list of safety deficiencies, called safety issues, ranked according to their safety significance and the corrective measures to improve overall safety. It is intended for use as a reference to facilitate the development of plant specific safety improvement programmes and to serve as a basis for reviewing their implementation. To the extent that information was made available to the IAEA, the country/plant specific status with respect to each safety issue is described. Section 2 provides an overview of the impact of the relevant issues on the main safety functions in different operational conditions and other aspects important to overall plant safety. A summary of the safety issues and their respective ranking is given in Tables 1 and 2 at the end of Section 2. Section 3 deals with individual safety issues identified in the design which are presented according to the structure below. Section 4 presents the safety issues related to operational safety according to a similar structure but without the ranking. 73 refs, 3 tabs

Safety issues and their ranking for WWER-1000 model 320 nuclear power plants. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

International Nuclear Information System (INIS)

1997-04-01

The objective of this report is to present a consolidated list of safety deficiencies, called safety issues, ranked according to their safety significance and the corrective measures to improve overall safety. It is intended for use as a reference to facilitate the development of plant specific safety improvement programmes and to serve as a basis for reviewing their implementation. To the extent that information was made available to the IAEA, the country/plant specific status with respect to each safety issue is described. Section 2 provides an overview of the impact of the relevant issues on the main safety functions in different operational conditions and other aspects important to overall plant safety. A summary of the safety issues and their respective ranking is given in Tables 1 and 2 at the end of Section 2. Section 3 deals with individual safety issues identified in the design which are presented according to the structure below. Section 4 presents the safety issues related to operational safety according to a similar structure but without the ranking

Occupational safety and health issues associated with green building

NARCIS (Netherlands)

Terwoert, J.; Ustailieva, E.

2013-01-01

This e-fact provides information on the work-related risk factors and the occupational safety and health (OSH) issues associated the planning and construction of green buildings, their maintenance, renovation (retrofitting), demolition, on-site waste collection. Some of these OSH risks are new

Ferrocyanide Safety Program: Data requirements for the ferrocyanide safety issue developed through the data quality objectives (DQO) process

International Nuclear Information System (INIS)

Buck, J.W.; Anderson, C.M.; Pulsipher, B.A.; Toth, J.J.; Turner, P.J.; Cash, R.J.; Dukelow, G.T.; Meacham, J.E.

1993-12-01

This document records the data quality objectives (DQO) process applied to the Ferrocyanide Waste Tank Safety Issue at the Hanford Site by the Pacific Northwest Laboratory and Westinghouse Hanford Company. Specifically, the major recommendations and findings from this Ferrocyanide DQO process are presented so that decision makers can determine the type, quantity, and quality of data required for addressing tank safety issues. The decision logic diagrams and error tolerance equations also are provided. Finally, the document includes the DQO sample-size formulas for determining specific tank sampling requirements

The future of nuclear power after Sizewell B. 3 v.: v. 1 Economic issues; v. 2 Environmental and safety issues; v. 3 Public perception issues

International Nuclear Information System (INIS)

1987-01-01

The three days of conference proceedings are published in three separate volumes. The first includes 7 papers relating to economic issues - those presented at the Sizewell-B public inquiry and the changes in the economic situation since the inquiry ended. The electricity demand, how this demand is to be met by nuclear and other fuel sources and how energy conservation might be an economic alternative to simply building more generating capacity are all issues discussed. The possible privatisation of the industry is also touched on. Volume two has 8 papers concerned with environmental and safety issues. These include the influence of the Sizewell-B decision on nuclear licensing and reactor safety, the technical and safety aspects of pressurized water reactors (PWR), the roles of British Nuclear Fuels and the United Kingdom Atomic Energy Authority, and radiation protection and effluent discharge control. The six papers in volume 3 look at public perception issues - not only towards nuclear power but towards the public inquiry process. The local authority view, the Friends of the Earth case against the PWR, and technical expertise in the decision process are also topics covered. All the papers are indexed separately. (UK)

Safety issues and their ranking for 'small series' WWER-1000 nuclear power plants. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-09-01

This report presents the safety issues in 'small series' WWER-1000 nuclear power plants (NPPs). Safety issues are deviations from current recognized safety practices in design and operation judged to be safety significant by their impact on the plants' defence in depth. This report is intended to serve as reference for the development of plant specific safety improvement programmes and for the evaluation of measures proposed and/or implemented. The identification of safety issues is based on safety studies conducted by the operators of 'small series' WWER-1000 units and by organizations dealing with these reactors, on findings of IAEA safety missions to 'small series' WWER-1000 plants in South Ukraine, at Novovoronezh and Kalinin, and on information obtained from specialists from various countries during an IAEA consultants meeting, 8-12 September 1997 in Vienna, within the framework of the Extra budgetary Programme on the Safety of WWER and RBMK NPPs. Safety issues are first presented according to their impact on the main safety functions and are then described individually. The safety issues are characterized by issue title and specified by issue clarification. Safety issues connected with plant design are followed by the ranking of the issue and ranking justification. Altogether 85 safety issues have been identified, 12 of which are in Category III (defence in depth is insufficient, immediate corrective action is necessary), 38 in Category 11 (defence in depth is degraded, action is needed to resolve the issue) and 22 in Category I (departure from international practices, to be addressed as part of actions to resolve higher priority issues). In the case of operational safety issues (13 safety issues) no ranking is provided as the available material was considered insufficient. For each safety issue, comments and recommendations are made by the IAEA; the status of corresponding measures to improve safety implemented or planned at each site are presented in the

Safety issues and their ranking for 'small series' WWER-1000 nuclear power plants. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

International Nuclear Information System (INIS)

2000-09-01

This report presents the safety issues in 'small series' WWER-1000 nuclear power plants (NPPs). Safety issues are deviations from current recognized safety practices in design and operation judged to be safety significant by their impact on the plants' defence in depth. This report is intended to serve as reference for the development of plant specific safety improvement programmes and for the evaluation of measures proposed and/or implemented. The identification of safety issues is based on safety studies conducted by the operators of 'small series' WWER-1000 units and by organizations dealing with these reactors, on findings of IAEA safety missions to 'small series' WWER-1000 plants in South Ukraine, at Novovoronezh and Kalinin, and on information obtained from specialists from various countries during an IAEA consultants meeting, 8-12 September 1997 in Vienna, within the framework of the Extra budgetary Programme on the Safety of WWER and RBMK NPPs. Safety issues are first presented according to their impact on the main safety functions and are then described individually. The safety issues are characterized by issue title and specified by issue clarification. Safety issues connected with plant design are followed by the ranking of the issue and ranking justification. Altogether 85 safety issues have been identified, 12 of which are in Category III (defence in depth is insufficient, immediate corrective action is necessary), 38 in Category 11 (defence in depth is degraded, action is needed to resolve the issue) and 22 in Category I (departure from international practices, to be addressed as part of actions to resolve higher priority issues). In the case of operational safety issues (13 safety issues) no ranking is provided as the available material was considered insufficient. For each safety issue, comments and recommendations are made by the IAEA; the status of corresponding measures to improve safety implemented or planned at each site are presented in the

ISSUES AND RECENT TRENDS IN VEHICLE SAFETY COMMUNICATION SYSTEMS

Directory of Open Access Journals (Sweden)

Sadayuki TSUGAWA

2005-01-01

Full Text Available This paper surveys the research on the applications of inter-vehicle communications, the issues of the deployment and technology, and the current status of inter-vehicle communications projects in Europe, the United States and Japan. The inter-vehicle communications, defined here as communications between on-board ITS computers, improve road traffic safety and efficiency by expanding the horizon of the drivers and on-board sensors. One of the earliest studies on inter-vehicle communications began in Japan in the early 1980s. The inter-vehicle communications play an essential role in automated platooning and cooperative driving systems developed since the 1990's by enabling vehicles to obtain data that would be difficult or impossible to measure with on-board sensors. During these years, interest in applications for inter-vehicle communications increased in the EU, the US and Japan, resulting in many national vehicle safety communications projects such as CarTALK2000 in the EU and VSCC in the US. The technological issues include protocol and communications media. Experiments employ various kinds of protocols and typically use infrared, microwave or millimeter wave media. The situation is ready for standardization. The deployment strategy is another issue. To be feasible, deployment should begin with multiple rather than single services that would work even at a low penetration rate of the communication equipment. In addition, non-technological, legal and institutional issues remained unsolved. Although inter-vehicle communications involve many issues, such applications should be promoted because they will lead to safer and more efficient automobile traffic.

Hanford Site organic waste tanks: History, waste properties, and scientific issues

International Nuclear Information System (INIS)

Strachan, D.M.; Schulz, W.W.; Reynolds, D.A.

1993-01-01

Eight Hanford single-shell waste tanks are included on a safety watch list because they are thought to contain significant concentrations of various organic chemical. Potential dangers associated with the waste in these tanks include exothermic reaction, combustion, and release of hazardous vapors. In all eight tanks the measured waste temperatures are in the range 16 to 46 degree C, far below the 250 to 380 degree C temperatures necessary for onset of rapid exothermic reactions and initiation of deflagration. Investigation of the possibility of vapor release from Tank C-103 has been elevated to a top safety priority. There is a need to obtain an adequate number of truly representative vapor samples and for highly sensitive and capable methods and instruments to analyze these samples. Remaining scientific issues include: an understanding of the behavior and reaction of organic compounds in existing underground tank environments knowledge of the types and amounts of organic compounds in the tanks knowledge of selected physical and chemical properties of organic compounds source, composition, quality, and properties of the presently unidentified volatile organic compound(s) apparently evolving from Tank C-103

NS [Nuclear Safety] update. Current safety and security activities and developments taking place in the Department of Nuclear Safety and Security, Issue no. 12, September 2009

International Nuclear Information System (INIS)

2009-09-01

The current issue presents information about the following topics: Nuclear Security Report 2009; G8 Nuclear Safety and Security Group (NSSG); Uranium Production Site Appraisal Team (UPSAT); New Entrant Nuclear Power Programmes Safety Guide on the Establishment of the Safety Infrastructure (DS424)

Specific issues, exact locations: case study of a community mapping project to improve safety in a disadvantaged community.

Science.gov (United States)

Qummouh, Rana; Rose, Vanessa; Hall, Pat

2012-12-01

Safety is a health issue and a significant concern in disadvantaged communities. This paper describes an example of community-initiated action to address perceptions of fear and safety in a suburb in south-west Sydney which led to the development of a local, community-driven research project. As a first step in developing community capacity to take action on issues of safety, a joint resident-agency group implemented a community safety mapping project to identify the extent of safety issues in the community and their exact geographical location. Two aerial maps of the suburb, measuring one metre by two metres, were placed on display at different locations for four months. Residents used coloured stickers to identify specific issues and exact locations where crime and safety were a concern. Residents identified 294 specific safety issues in the suburb, 41.9% (n=123) associated with public infrastructure, such as poor lighting and pathways, and 31.9% (n=94) associated with drug-related issues such as drug activity and discarded syringes. Good health promotion practice reflects community need. In a very practical sense, this project responded to community calls for action by mapping resident knowledge on specific safety issues and exact locations and presenting these maps to local decision makers for further action.

Safety issues and their ranking for WWER-440 model 213 nuclear power plants. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

International Nuclear Information System (INIS)

1996-04-01

The objective of this report is to present a consolidated list of generic safety concerns, called safety issues, ranked according to their safety significance and the corrective measures to improve safety. It is intended for use as a reference to facilitate the development of plant specific safety improvement programmes and to serve as a basis for reviewing their implementation. Section 2 provides and overview of the impact of all relevant issues on the main safety functions and other aspects important to overall plant safety. Section 3 presents safety issues identified in design according to the structure described below. Section 4 presents the safety issues in the area of operation, according to the same structure except that no ranking is given. At the end of Section 2, Tables 1 and 2 present a summary of all safety issues in a tabular form. 138 refs, tabs

IAEA activities on communication of nuclear safety issues

International Nuclear Information System (INIS)

Wieland, P.

2001-01-01

The regulatory authorities in several countries have taken the initiative to overcome the renowned difficulties of communicating nuclear safety issues. They communicate with segments of the public specially in case of nuclear/radiological accidents, waste disposal, transport of radioactive material or food irradiation. This reflects the full recognition of the importance of the topic. However it is also recognized that there is hitherto a need of international assistance in order to develop a regulatory communication strategy that could be harmonized and at the same time customized to the different needs. Communications on nuclear, radiation, transport and radioactive waste safety are needed to: disseminate information on safety to the public in both routine and emergency situations ; be attentive to public concerns, and address them; maintain social trust and confidence by keeping society informed on the established safety standards and how they are enforced; facilitate the decision-making process on nuclear matters by promptly presenting factual information in a clear manner; integrate and maintain an information network at both the national and international levels; improve co-operation with other countries and international organizations; encourage the dissemination of factual information on nuclear issues in schools. A major factor in addressing all of these questions is understanding the audience(s). A two way communication process is needed to establish what particular audiences want to know and in what form they prefer to receive information. This will differ depending on the audience and circumstances. For example, the information on a routine day-to-day basis will be different from what might be needed at the time of an accident. Communication with the news media is a matter of particular importance, as they are both an audience in themselves and a channel for communicating with wider audiences. (author)

Planning exercise for the resolution of high level waste tank safety issues

International Nuclear Information System (INIS)

Bunting, J.; Saveland, J.

1992-01-01

Several conditions have been found to exist within high level radioactive waste storage tanks at the Hanford site which could lead to uncontrolled exothermic reactions and/or to the release of tank contents into the environment. These conditions have led to the establishment of four priority 1 safety issues for the Hanford tanks. Resolution of these safety issues will require the coordinated efforts of professionals in chemical, nuclear, operations, safety, and other technical areas. A coordinated and integrated approach is necessary in order to achieve resolution in the shortest possible time, while ensuring that the steps taken do not complicate the later jobs of vitrification and ultimate disposal. This paper describes the purpose, process, and results of an effort to develop a suggested approach. (author)

Resolution of Generic Safety Issue 29: Bolting degradation or failure in nuclear power plants

International Nuclear Information System (INIS)

Johnson, R.E.

1990-06-01

This report describes the US Nuclear Regulatory Commission's (NRC's) Generic Safety Issue 29, ''Bolting Degradation or Failure in Nuclear Power Plants,'' including the bases for establishing the issue and its historical highlights. The report also describes the activities of the Atomic Industrial Forum (AIF) relevant to this issue, including its cooperation with the Materials Properties Council (MPC) to organize a task group to help resolve the issue. The Electric Power Research Institute, supported by the AIF/MPC task group, prepared and issued a two-volume document that provides, in part, the technical basis for resolving Generic Safety Issue 29. This report presents the NRC's review and evaluation of the two-volume document and NRC's conclusion that this document, in conjunction with other information from both industry and NRC, provides the bases for resolving this issue

Study on operational safety issues in the Japanese disposal concept

International Nuclear Information System (INIS)

Suzuki, Satoru; Kitagawa, Yoshito; Hyodo, Hideaki; Kubota, Shigeru; Iijima, Masayoshi; Tamura, Akio; Ishiguro, Katsuhiko; Fujihara, Hiroshi

2014-01-01

In Japan, vitrified high-level radioactive waste (HLW) and certain types of low-level radioactive waste that results from the reprocessing of spent fuel and classified as TRU waste will be disposed of in deep geological formations. NUMO aims to ensure the safety of local residents and workers during the operational phase and after repository closure and will therefore establish a safety case for the geological disposal programme at the end of each stage of the stepwise siting process. Although the Japanese programme is still in the stage before initiation of the siting process, updating the generic (non-site-specific) safety case is required for building confidence among stakeholders. This study focuses on operational safety issues for the Japanese HLW disposal concept. (authors)

A framework for elaborating a geological disposal safety case: Main issues to be addressed

International Nuclear Information System (INIS)

Besnus, F.; Gay, D.

2002-01-01

International guidance on safety standards for the geological disposal of radioactive waste is being elaborated by IAEA. A comparison of experiences acquired in developing deep repository projects shows that many important issues related to the progressive building of confidence in the safety demonstration of such facilities are commonly addressed by the various organisations involved in radioactive waste management. However, there is still some discrepancies in defining the steps that form the staged elaboration of a safety case. This paper intends to propose a framework for defining the safety case in describing the main issues to be addressed and highlighting questions of consistency between former steps. (author)

NS [Nuclear Safety] update. Current safety and security activities and developments taking place in the Department of Nuclear Safety and Security, Issue no. 6, March 2008

International Nuclear Information System (INIS)

2008-03-01

The current issue presents information about the following activities: 1) International Conference on Illicit Nuclear Trafficking which took place in November 2007 in Edinburgh. The principal aim of the conference was to examine the threat and context of illicit nuclear trafficking of radioactive material, specifically, what is being done to combat such trafficking and where more needs to be done. The conference was also to consider how the obligations and commitments of the legally binding and non-binding international instruments could be and are being implemented by various States. 2) INSAG Message on Nuclear Safety Infrastructure in which the INSAG Chairman Richard Meserve addressed nuclear safety in the current context and various issues that warrant special attention. 3) approved for publication the Safety Requirements publication on Safety of Nuclear Fuel Cycle Facilities. 4) The Asian Nuclear Safety Network (ANSN)

A summary description of the flammable gas tank safety program

International Nuclear Information System (INIS)

Johnson, G.D.; Sherwood, D.J.

1994-10-01

Radioactive liquid waste may produce hydrogen as result of the interaction of gamma radiation and water. If the waste contains organic chelating agents, additional hydrogen as well as nitrous oxide and ammonia may be produced by thermal and radiolytic decomposition of these organics. Several high-level radioactive liquid waste storage tanks, located underground at the Hanford Site in Washington State, are on a Flammable Gas Watch List. Some contain waste that produces and retains gases until large quantities of gas are released rapidly to the tank vapor space. Tanks nearly-filled to capacity have relatively little vapor space; therefore if the waste suddenly releases a large amount of hydrogen and nitrous oxide, a flammable gas mixture could result. The most notable example of a Hanford waste tank with a flammable gas problem is tank 241-SY-101. Upon occasion waste stored in this tank has released enough flammable gas to burn if an ignition source had been present inside of the tank. Several, other Hanford waste tanks exhibit similar behavior although to a lesser magnitude. Because this behavior was hot adequately-addressed in safety analysis reports for the Hanford Tank Farms, an unreviewed safety question was declared, and in 1990 the Flammable Gas Tank Safety Program was established to address this problem. The purposes of the program are a follows: (1) Provide safety documents to fill gaps in the safety analysis reports, and (2) Resolve the safety issue by acquiring knowledge about gas retention and release from radioactive liquid waste and developing mitigation technology. This document provides the general logic and work activities required to resolve the unreviewed safety question and the safety issue of flammable gas mixtures in radioactive liquid waste storage tanks

DuPont Chemical Vapor Technical Report

International Nuclear Information System (INIS)

MOORE, T.L.

2003-01-01

DuPont Safety Resources was tasked with reviewing the current chemical vapor control practices and providing preventive recommendations on best commercial techniques to control worker exposures. The increased focus of the tank closure project to meet the 2024 Tri-Party Agreement (TPA) milestones has surfaced concerns among some CH2MHill employees and other interested parties. CH2MHill is committed to providing a safe working environment for employees and desires to safely manage the tank farm operations using appropriate control measures. To address worker concerns, CH2MHill has chartered a ''Chemical Vapors Project'' to integrate the activities of multiple CH2MHill project teams, and solicit the expertise of external resources, including an independent Industrial Hygiene expert panel, a communications consultant, and DuPont Safety Resources. Over a three-month time period, DuPont worked with CH2MHill ESH and Q, Industrial Hygiene, Engineering, and the independent expert panel to perform the assessment. The process included overview presentations, formal interviews, informal discussions, documentation review, and literature review. DuPont Safety Resources concluded that it is highly unlikely that workers in the tank farms are exposed to chemicals above established standards. Additionally, the conventional and radiological chemistry is understood, the inherent chemical hazards are known, and the risk associated with chemical vapor exposure is properly managed. The assessment highlighted management's commitment to addressing chemical vapor hazards and controlling the associated risks. Additionally, we found the Industrial Hygiene staff to be technically competent and well motivated. The tank characterization data resides in a comprehensive database containing the tank chemical compositions and relevant airborne concentrations

NS [Nuclear Safety] update. Current safety and security activities and developments taking place in the Department of Nuclear Safety and Security, Issue no. 10, March 2009

International Nuclear Information System (INIS)

2009-03-01

The current issue contains information about the following meetings: Application of the Code of Conduct on the Safety of Research Reactors (the 'Code'). Environmental Modelling for Radiation Safety (EMRAS II); Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management (the Joint Convention). The document also gives an overview on International Nuclear Security Advisory Service (INSServ)

Waste Tank Safety Screening Module: An aspect of Hanford Site tank waste characterization

International Nuclear Information System (INIS)

Hill, J.G.; Wood, T.W.; Babad, H.; Redus, K.S.

1994-01-01

Forty-five (45) of the 149 Hanford single-shell tanks have been designated as Watch-List tanks for one or more high-priority safety issues, which include significant concentrations of organic materials, ferrocyanide salts, potential generation of flammable gases, high heat generation, criticality, and noxious vapor generation. While limited waste characterization data have been acquired on these wastes under the original Tri-Party Agreement, to date all of the tank-by-tank assessments involved in these safety issue designations have been based on historical data rather than waste on data. In response to guidance from the Defense Nuclear Facilities Safety Board (DNFSB finding 93-05) and related direction from the US Department of Energy (DOE), Westinghouse Hanford Company, assisted by Pacific Northwest Laboratory, designed a measurements-based screening program to screen all single-shell tanks for all of these issues. This program, designated the Tank Safety Screening Module (TSSM), consists of a regime of core, supernatant, and auger samples and associated analytical measurements intended to make first-order discriminations of the safety status on a tank-by-tank basis. The TSSM combines limited tank sampling and analysis with monitoring and tank history to provide an enhanced measurement-based categorization of the tanks relative to the safety issues. This program will be implemented beginning in fiscal year (FY) 1994 and supplemented by more detailed characterization studies designed to support safety issue resolution

Contrast media. Safety issues and ESUR guidelines

Energy Technology Data Exchange (ETDEWEB)

Thomsen, H.S. (ed.) [Copenhagen Univ. Hospital, Herlev (Denmark). Dept. of Diagnostic Radiology 54E2

2006-07-01

In 1994 the European Society of Urogenital Radiology (ESUR) set up a committee to consider the safety of the contrast media used in radiology departments. Since then, the committee has questioned members, reviewed the literature, proposed guidelines, and discussed these proposals with participants at the annual symposia on urogenital radiology. This book represents the end result of this hard work. It contains all of the agreed guidelines, updated when necessary, and thereby comprehensively covers the many different safety issues relating to the diverse contrast media: barium contrast media, iodinated contrast media, MR contrast media (both gadolinium-based extracellular and organ-specific) and ultrasound contrast media. The prevention and treatment of both acute and delayed non-renal adverse reactions as well as the renal adverse reactions are covered in detail. The inclusion of all the ESUR guidelines within one book will offer an invaluable, unique and unparalleled resource. (orig.)

Contrast media. Safety issues and ESUR guidelines

International Nuclear Information System (INIS)

Thomsen, H.S.

2006-01-01

In 1994 the European Society of Urogenital Radiology (ESUR) set up a committee to consider the safety of the contrast media used in radiology departments. Since then, the committee has questioned members, reviewed the literature, proposed guidelines, and discussed these proposals with participants at the annual symposia on urogenital radiology. This book represents the end result of this hard work. It contains all of the agreed guidelines, updated when necessary, and thereby comprehensively covers the many different safety issues relating to the diverse contrast media: barium contrast media, iodinated contrast media, MR contrast media (both gadolinium-based extracellular and organ-specific) and ultrasound contrast media. The prevention and treatment of both acute and delayed non-renal adverse reactions as well as the renal adverse reactions are covered in detail. The inclusion of all the ESUR guidelines within one book will offer an invaluable, unique and unparalleled resource. (orig.)

Addressing the fundamental issues in reliability evaluation of passive safety of AP1000 for a comparison with active safety of PWR

International Nuclear Information System (INIS)

Hashim Muhammad; Yoshikawa, Hidekazu; Yang Ming

2013-01-01

Passive safety systems adopted in advanced Pressurized Water Reactor (PWR), such as AP1000 and EPR, should attain higher reliability than the existing active safety systems of the conventional PWR. The objective of this study is to discuss the fundamental issues relating to the reliability evaluation of AP1000 passive safety systems for a comparison with the active safety systems of conventional PWR, based on several aspects. First, comparisons between conventional PWR and AP1000 are made from the both aspects of safety design and cost reduction. The main differences between these PWR plants exist in the configurations of safety systems: AP1000 employs the passive safety system while reducing the number of active systems. Second, the safety of AP1000 is discussed from the aspect of severe accident prevention in the event of large break loss of coolant accidents (LOCA). Third, detailed fundamental issues on reliability evaluation of AP1000 passive safety systems are discussed qualitatively by using single loop models of safety systems of both PWRs plants. Lastly, methodology to conduct quantitative estimation of dynamic reliability for AP1000 passive safety systems in LOCA condition is discussed, in order to evaluate the reliability of AP1000 in future by a success-path-based reliability analysis method (i.e., GO-FLOW). (author)

Safety issues relating to the design of fusion power facilities

International Nuclear Information System (INIS)

Stasko, R.R.; Wong, K.Y.; Russell, S.B.

1986-06-01

In order to make fusion power a viable future source of energy, it will be necessary to ensure that the cost of power for fusion electric generation is competitive with advanced fission concepts. In addition, fusion power will have to live up to its original promise of being a more radiologically benign technology than fission, and be able to demonstrate excellent operational safety performance. These two requirements are interrelated, since the selection of an appropriate safety philosophy early in the design phase could greatly reduce or eliminate the capital costs of elaborate safety related and protective sytems. This paper will briefly overview a few of the key safety issues presently recognized as critical to the ultimate achievement of licensable, environmentally safe and socially acceptable fusion power facilities. 12 refs

Japan's regulatory and safety issues regarding nuclear materials transport

International Nuclear Information System (INIS)

Saito, T.; Yamanaka, T.

2004-01-01

This paper focuses on the regulatory and safety issues on nuclear materials transport which the Government of Japan (GOJ) faces and needs to well handle. Background information about the status of nuclear power plants (NPP) and nuclear fuel cycle (NFC) facilities in Japan will promote a better understanding of what this paper addresses

Campus Safety and Student Privacy Issues in Higher Education

Science.gov (United States)

Burnett, Kristen Slater

2010-01-01

The purpose of this study is to delve into, and further understand, the perceptions of higher education administrators when they experience having to simultaneously balance the issues of campus safety and student privacy. The research surveyed approximately 900 (with 147 returns) administrators who self-identified as having a role in incidents of…

Assessment of policy issues in nuclear safety regulation according to circumstantial changes

Energy Technology Data Exchange (ETDEWEB)

Chang, Soon Heung; Lee, Byong Ho; Baek, Won Pil; Lee, Kwang Gu; Huh, Gyun Young; Hahn, Young Tae [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

2000-03-15

The objective of the work is to assess various issues in nuclear safety regulation in consideration of circumstantial changes. Emphasis is given to the safety of operating NPPs. It is concluded that the Periodic Safety Review (PSR) should be implemented in Korea as soon as possible, in harmonization with the regulation for life extension of NPPs. The IAEA guidelines, including 10 year intervals and 11 safety factors, should be used as the basic guidelines. The approach to improve regulatory effectiveness is also reviewed and a transition to 'knowledge-based regulation' is suggested.

Assessment of policy issues in nuclear safety regulation according to circumstantial changes

Energy Technology Data Exchange (ETDEWEB)

Chang, Soon Heung; Chang, Soon Heung; Lee, Byong Ho; Baek, Won Pil; Roh, Chang Hyun; Lee, Kwang Gu; Kim, Hong Chae; Lee, Yong Ho [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1999-03-15

The objective of the work is to assess various issues in nuclear safety regulation in consideration of circumstantial changes. Emphasis is given to the safety of operating NPPs. It is concluded that the Periodic Safety Review (PSR) should be implemented in Korea as soon as possible, in harmonization with the regulation for life extension of NPPs. The IAEA guidelines, including 10 year intervals and 11 safety factors, should be used as the basic guidelines. Efforts are also required to cope with other circumstantial changes such as the establishment of International Nuclear Regulators Association (INRA)

Safety issues related to the intermediate heat storage for the EU DEMO

Energy Technology Data Exchange (ETDEWEB)

Carpignano, Andrea [NEMO group, Dipartimento Energia, Politecnico di Torino, C.so Duca degli Abruzzi 24, 10129 Torino (Italy); Pinna, Tonio [ENEA, 00044 Frascati (Italy); Savoldi, Laura; Sobrero, Giulia; Uggenti, Anna Chiara [NEMO group, Dipartimento Energia, Politecnico di Torino, C.so Duca degli Abruzzi 24, 10129 Torino (Italy); Zanino, Roberto, E-mail: roberto.zanino@polito.it [NEMO group, Dipartimento Energia, Politecnico di Torino, C.so Duca degli Abruzzi 24, 10129 Torino (Italy)

2016-11-01

Highlights: • IHS affects only the PHTS and the BoP (Balance of Plant). • PIEs list does not change but IHS influences PIEs evolution. • Additional issues to be addressed in PIEs study due to the implementation of HIS. • No safety/operational major obstacles were found for IHS concept. - Abstract: The functional deviations able to compromise system safety in the EU DEMO Primary Heat Transfer System (PHTS) with intermediate heat storage (IHS) based on molten salts are identified and compared to the deviations identified with PHTS without IHS. The resulting safety issues for the Balance of Plant (BoP) have been taken into account. Functional Failure Mode and Effects Analysis (FFMEA) is used to highlight the Postulated Initiating Events (PIE) of incident/accident sequences and to provide some safety insights during the preliminary design. The architecture of the system with IHS does not introduce new PIE with respect to the case without IHS, but it modifies some of them. In particular the two Postulated Initiating Events that are affected by the presence of IHS are the LOCA in the tubes of the HX between primary and intermediate circuit and the loss of heat sink for the first wall or the breeding zone. In fact the IHS introduces some advantages concerning the stability of the secondary circuit, but some weaknesses are associated to the physical-chemical nature of molten salts, especially oxidizing power, corrosive nature and risk of solidification. These issues can be managed in the design by the introduction of new safety functions.

Eminent radiological safety issues confronting the State of Hawaii

International Nuclear Information System (INIS)

Hashimoto, H.H.

1984-01-01

The State of Hawaii currently has over one hundred radioactive material use licenses. Nuclear Regulatory Commission licenses are primarily held by hospitals, industrial radiographers, and academic institutions. Complementing this, the State Department of Health regulates x-ray machines, radium, and has an emergency response role for accidents involving radioactive materials. The existing radiation protection program was created by piecemeal legislation. As a result, regulatory surveillance and actual control vary widely among the agencies. The State Legislature, in 1980, decided that action must be taken to set a clear state policy towards the use and disposal of nuclear materials. It was therefore recommended that the State of Hawaii Radiation Safety Advisory Committee be convened to assist the state in the evaluation of the issues. This report contains issue papers on radiation related topics addressed by the Radiation Safety Advisory Committe. Topics discussed include transportation, environmental monitoring, emergency response, and waste disposal. A survey of various radioactive sources identified medical applications as a category requiring stricter control. Selected chapters of the Hawaii Revised Statutes are also examined

Food safety measurement issues. Way forward

International Nuclear Information System (INIS)

Venkatesh Iyengar

2013-01-01

Ensuring food safety (FS) is a persistent concern frequently faced by many countries. Safeguarding the quality of food that is fit for human consumption is the primary responsibility of the governmental regulatory agencies. For most part, agro-industries and food processors assume voluntary leadership for producing safe food. However, in the event of FS breach, the regulatory responsibility kicks into identify and rectify the situation. Notwithstanding whether it is the regulator or the industry that institutes the remedial action (e.g. improved hygiene and refined agricultural and manufacturing practices), the role of laboratory measurements is central in safeguarding the integrity of a functioning FS system. There are many analytical tools available to implement this task, such as validated analytical methods, natural matrix reference materials, field tested monitoring systems (proactive assessment) and effective surveillance systems (constant vigilance to prevent repeat safety violations). Way forward: existing FS tools are insufficient and should be strengthened with innovative approaches. Examples are: assembling swift intervention logistics to face FS breaches; rapid response systems including communication; robust metrology based measurement systems located at strategic locations in the country; and inter-disciplinary human resource to match the need for capacity development. These issues are discussed. (author)

Identification of unresolved safety issues relating to nuclear power plants. Report to Congress

International Nuclear Information System (INIS)

1979-01-01

The report describes the review undertaken over the last year that resulted in identifying 17 issues as Unresolved Safety Issues. In addition, the report provides specific discussions of why certain issues were not included. The report also provides a brief background discussion describing Section 210 of the Energy Reorganization Act and the NRC program for the resolution of generic issues described in NUREG-0410

Materials-related issues in the safety and licensing of nuclear fusion facilities

Science.gov (United States)

Taylor, N.; Merrill, B.; Cadwallader, L.; Di Pace, L.; El-Guebaly, L.; Humrickhouse, P.; Panayotov, D.; Pinna, T.; Porfiri, M.-T.; Reyes, S.; Shimada, M.; Willms, S.

2017-09-01

Fusion power holds the promise of electricity production with a high degree of safety and low environmental impact. Favourable characteristics of fusion as an energy source provide the potential for this very good safety and environmental performance. But to fully realize the potential, attention must be paid in the design of a demonstration fusion power plant (DEMO) or a commercial power plant to minimize the radiological hazards. These hazards arise principally from the inventory of tritium and from materials that become activated by neutrons from the plasma. The confinement of these radioactive substances, and prevention of radiation exposure, are the primary goals of the safety approach for fusion, in order to minimize the potential for harm to personnel, the public, and the environment. The safety functions that are implemented in the design to achieve these goals are dependent on the performance of a range of materials. Degradation of the properties of materials can lead to challenges to key safety functions such as confinement. In this paper the principal types of material that have some role in safety are recalled. These either represent a potential source of hazard or contribute to the amelioration of hazards; in each case the related issues are reviewed. The resolution of these issues lead, in some instances, to requirements on materials specifications or to limits on their performance.

Safety performance indicators. Topical issues paper no. 5

International Nuclear Information System (INIS)

Dahlgren, K.; Lederman, L.; Szikszai, T.; Palomo, J.

2001-01-01

performance, they are just one of a larger set of tools including probabilistic safety assessment (PSA), regulatory inspection, quality assurance, external reviews and self-assessment needed to assess operational safety performance. The integration of information compiled from such evaluation tools yields the best results. Two areas of increasingly common interest are 'risk based' indicators, and 'safety culture' indicators. The key to managing the nuclear business today is to establish a high quality safety management system as well as developing a strong safety culture within the entire organization. 'The safety management system comprises those arrangements made by the organization for the management of safety in order to promote a strong safety culture and achieve good safety performance'. This definition, presented in INSAG-13, illustrates the close connection between 'safety management systems' and 'safety culture' and that they are in fact inseparable. To manage safety effectively you need a systematic approach and at the same time be aware of the effects of the approach on individual and collective human behaviour. This issue covers the following: development of safety performance indicators, indicator selection and use, recommended indicators, indicators collected from nuclear power plant initiatives, management of safety and safety culture, need and feasibility of an international system, plant management needs, regulatory use of safety performance indicators, public communication, and recommendations for priorities in future work

Review of EU-APR Design for Selected Safety Issues of WERNA RHWG 2013

Energy Technology Data Exchange (ETDEWEB)

Kim, Yong Soo; Kim, Ji Hwan [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

Western European Nuclear Regulators' Association (WENRA) was established in 1999 to develop a harmonized approach to nuclear safety and radiation protection and their regulation. In 2013, the Reactor Harmonization Working Group (RHWG) of WENRA sets out the common positions on the seven selected key safety issues. This paper is to introduce the regulatory positions of WENRA RHWG 2013 and to review the compliance of the EU-APR with them. In this paper, we reviewed the compliance of the EUAPR regarding seven safety issues for new NPPs presented by WERNA RHWG in 2013. The EU-APR design fully complies with all WERNA RHWG safety issues since the following measures have been incorporated in it: - Successive five levels of DiD maintaining independence between different levels of DiD - Diverse design against multiple failure events such as ATWS, SBO, Loss of Ultimate Heat Sink, and Loss of Spent Fuel Pool Cooling - SAs dedicated mitigation systems to ensure the containment integrity during the SAs. - Practically eliminates accident sequences with a large or early release of radiological materials by diverse designs for multiple failure events, SAs dedicated mitigation system, and double containment design - Standard site parameters not lead to core melt accidents due to natural or man-made external hazards.

Implementation of Safety and Security Issues in the Transport of Radioactive Material in Argentina

International Nuclear Information System (INIS)

López Vietri, J.; Elechosa, C.; Gerez Miranda, C.; Menossi, S.; Rodríguez Roldán, M.S.; Fernández, A.

2016-01-01

This paper is intended to describe implementation of safety and security issues in the transport of radioactive material by the Nuclear Regulatory Authority (in Spanish Autoridad Regulatoria Nuclear, ARN), which is the Competent Authority of Argentina in Safety, Security and Safeguards of radioactive and nuclear material. There are depicted main regulatory activities dealing with the mentioned issues, and relevant milestones of national regulatory standards and guidance applied, that are based on requirements and guides from IAEA. Interfaces between Safety and Security sections are most of the times complementary but sometimes conflictive, therefore the resolution of such conflicts and goals achieved during their implementation are also commented; as well as future joint planned activities between both sections of ARN as a way to provide safety and security without compromising one or the other. (author)

Decreased respiratory symptoms in cannabis users who vaporize

Directory of Open Access Journals (Sweden)

Barnwell Sara

2007-04-01

Full Text Available Abstract Cannabis smoking can create respiratory problems. Vaporizers heat cannabis to release active cannabinoids, but remain cool enough to avoid the smoke and toxins associated with combustion. Vaporized cannabis should create fewer respiratory symptoms than smoked cannabis. We examined self-reported respiratory symptoms in participants who ranged in cigarette and cannabis use. Data from a large Internet sample revealed that the use of a vaporizer predicted fewer respiratory symptoms even when age, sex, cigarette smoking, and amount of cannabis used were taken into account. Age, sex, cigarettes, and amount of cannabis also had significant effects. The number of cigarettes smoked and amount of cannabis used interacted to create worse respiratory problems. A significant interaction revealed that the impact of a vaporizer was larger as the amount of cannabis used increased. These data suggest that the safety of cannabis can increase with the use of a vaporizer. Regular users of joints, blunts, pipes, and water pipes might decrease respiratory symptoms by switching to a vaporizer

RBMK safety issues

International Nuclear Information System (INIS)

Weber, J.P.; Reichenbach, D.; Tscherkashow, J.M.

1995-01-01

On the basis of information and documents from the RBMK operation countries, the Western consortium mainly examined the two most modern plants, Ignalin-2 and Smolensk-3. The identification of numerous shortcomings, some of which had already been recongized by the participating Eastern organizations, resulted in some 300 specific recommendations to reactor designers, operators and licensing authorities. These recommendations are to be acted upon at once; only a small number did not meet with the approval of the Eastern partners. The safety review provided the Western consotrium with a profound insight into the design and safety of third-generation RBMK reactors; the Eastern partners were able to accumulate experience in working with Western safety philosophy. (orig.) [de

Generic safety issues for nuclear power plants with pressurized heavy water reactors and measures for their resolution

International Nuclear Information System (INIS)

2007-06-01

The IAEA Conference on The Safety of Nuclear Power: Strategy for the Future in 1991 was a milestone in nuclear safety. The objective of this conference was to review nuclear power safety issues for which achieving international consensus would be desirable, to address concerns on nuclear safety and to formulate recommendations for future actions by national and international authorities to advance nuclear safety to the highest level. Two of the important items addressed by this conference were ensuring and enhancing safety of operating plants and treatment of nuclear power plants built to earlier safety standards. Publications related to these two items, that have been issued subsequent to this conference, include: A Common Basis for Judging the Safety of Nuclear Power Plants Built to Earlier Standards, INSAG-8 (1995), the IAEA Safety Guide 50-SG-O12, Periodic Safety Review of Operational Nuclear Power Plants (1994) and an IAEA publication on the Safety Evaluation of Operating Nuclear Power Plants Built to Earlier Standards - A Common Basis for Judgement (1997). Some of the findings of the 1991 conference have not yet been fully addressed. An IAEA Symposium on Reviewing the Safety of Existing Nuclear Power Plants in 1996 showed that there is an urgent need for operating organizations and national authorities to review operating nuclear power plants which do not meet the high safety levels of the vast majority of plants and to undertake improvements, with assistance from the international community if required. Safety reviews of operating nuclear power plants take on added importance in the context of the Convention on Nuclear Safety and its implementation. To perform safety reviews and to reassess the safety of operating nuclear power plants in a uniform manner, it is imperative to have an internationally accepted reference. Existing guidance needs to be complemented by a list of safety issues which have been encountered and resolved in other plants and which can

Modeling issues associated with production reactor safety assessment

International Nuclear Information System (INIS)

Stack, D.W.; Thomas, W.R.

1990-01-01

This paper describes several Probabilistic Safety Assessment (PSA) modeling issues that are related to the unique design and operation of the production reactors. The identification of initiating events and determination of a set of success criteria for the production reactors is of concern because of their unique design. The modeling of accident recovery must take into account the unique operation of these reactors. Finally, a more thorough search and evaluation of common-cause events is required to account for combinations of unique design features and operation that might otherwise not be included in the PSA. It is expected that most of these modeling issues also would be encountered when modeling some of the other more unique reactor and nonreactor facilities that are part of the DOE nuclear materials production complex. 9 refs., 2 figs

Key issues on safety design basis selection and safety assessment

International Nuclear Information System (INIS)

An, S.; Togo, Y.

1976-01-01

In current fast reactor design in Japan, four design accident conditions and four design seismic conditions are adopted as the design base classifications. These are classified by the considerations on both likelihood of occurrence and the severeness of the consequences. There are several major problem areas in safety design consideration such as core accident problems which include fuel sodium interaction, fuel failure propagation and residual decay heat removal, and decay heat removal systems problems which is more or less the problem of selection of appropriate system and of assurance of high reliability of the system. In view of licensing, two kinds of accidents are postulated in evaluating the adequacy of a reactor site. The one is the ''major accident'' which is the accident to give most severe radiation hazard to the public from technical point of view. The other is the ''hypothetical accident'', induced public accident of which is severer than that of major accident. While the concept of the former is rather unique to Japanese licensing, the latter is almost equivalent to design base hypothetical accident of the US practice. In this paper, design bases selections, key safety issues and some of the licensing considerations in Japan are described

Occupational health and safety issues among nurses in the Philippines.

Science.gov (United States)

de Castro, A B; Cabrera, Suzanne L; Gee, Gilbert C; Fujishiro, Kaori; Tagalog, Eularito A

2009-04-01

Nursing is a hazardous occupation in the United States, but little is known about workplace health and safety issues facing the nursing work force in the Philippines. In this article, work-related problems among a sample of nurses in the Philippines are described. Cross-sectional data were collected through a self-administered survey during the Philippine Nurses Association 2007 convention. Measures included four categories: work-related demographics, occupational injury/illness, reporting behavior, and safety concerns. Approximately 40% of nurses had experienced at least one injury or illness in the past year, and 80% had experienced back pain. Most who had an injury did not report it. The top ranking concerns were stress and overwork. Filipino nurses encounter considerable health and safety concerns that are similar to those encountered by nurses in other countries. Future research should examine the work organization factors that contribute to these concerns and strengthen policies to promote health and safety.

Occupational Health and Safety Issues Among Nurses in the Philippines

Science.gov (United States)

de Castro, A. B.; Cabrera, Suzanne L.; Gee, Gilbert C.; Fujishiro, Kaori; Tagalog, Eularito A.

2009-01-01

Nursing is a hazardous occupation in the United States, but little is known about workplace health and safety issues facing the nursing work force in the Philippines. In this article, work-related problems among a sample of nurses in the Philippines are described. Cross-sectional data were collected through a self-administered survey during the Philippine Nurses Association 2007 convention. Measures included four categories: work-related demographics, occupational injury/illness, reporting behavior, and safety concerns. Approximately 40% of nurses had experienced at least one injury or illness in the past year, and 80% had experienced back pain. Most who had an injury did not report it. The top ranking concerns were stress and overwork. Filipino nurses encounter considerable health and safety concerns that are similar to those encountered by nurses in other countries. Future research should examine the work organization factors that contribute to these concerns and strengthen policies to promote health and safety. PMID:19438081

Research of beryllium safety issues

International Nuclear Information System (INIS)

Longhurst, G.R.; Anderl, R.A.; Dolan, T.J.; Hankins, M.R.; Pawelko, R.J.

1993-01-01

Beryllium has been identified as a leading contender for the plasma-facing material in ITER. Its use has some obvious advantages, but there are also a number of safety concerns associated with it. The Idaho National Engineering Laboratory (INEL) has undertaken a number of studies to help resolve some of these issues. One issue is the response of beryllium to neutron irradiation. We have tested samples irradiated in the Advanced Test Reactor (ATR) and are currently preparing to make measurements of the change in mechanical properties of beryllium samples irradiated at elevated temperatures in the Fast Flux Test Facility (FFTF) and the Experimental Breeder Reactor II (EBR-II) at the INEL. Mechanical tests will be conducted at the irradiation temperatures of 375-550 C. Other experiments address permeation and retention of implanted tritium in plasma-sprayed beryllium. In one test the porosity of the material allowed 0.12% of implanted ions and 0.17% of atoms from background gas pressure to pass through the foil with essentially no delay. For comparison, similar tests on fully dense hot-rolled, vacuum melted or sintered powder foils of high purity beryllium showed only 0.001% of implanting ions to pass through the foil, and then only after a delay of several hours. None of the molecular gas appeared to permeate these latter targets. An implication is that plasma-sprayed beryllium may substantially enhance recycling of tritium to the plasma provided it is affixed to a relatively impermeable substrate. (orig.)

Team of experts concludes review of safety issues at Temelin

International Nuclear Information System (INIS)

2001-01-01

Full text: At the request of the Czech Government, the International Atomic Energy Agency (IAEA) assembled a team of national experts from Bulgaria, France, Germany, Spain, and the United Kingdom, with an observer from Austria, to review safety issues at the Temelin power plant that were identified in 1996 as relevant to reactors of the generic Temelin design (WWER-1000/320 type). Following a detailed on-site review from 18 to 23 November 2001, the experts concluded that most identified issues had been addressed and resolved. Work is continuing on the few remaining issues. These issues, however, are not judged by them to be significant and would not from the experts' standpoint preclude the safe operation of the Temelin nuclear power plant. The final report of the team of experts will be available to the Czech Government in one month's time. (author)

Program plan for evaluation of the Ferrocyanide Waste Tank safety issue at the Hanford Site

International Nuclear Information System (INIS)

Borsheim, G.L.; Meacham, J.E.; Cash, R.J.; Dukelow, G.T.

1994-03-01

This document describes the background, priorities, strategy and logic, and task descriptions for the Ferrocyanide Waste Tank Safety Program. The Ferrocyanide Safety Program was established in 1990 to provide resolution of a major safety issue identified for 24 high-level radioactive waste tanks at the Hanford Site

Confined Site Construction: A qualitative investigation of critical issues affecting management of Health and Safety

OpenAIRE

Spillane, John P.; Oyedele, Lukumon O.; Von Meding, Jason; Konanahalli, Ashwini; Jaiyeoba, Babatunde E.; Tijani, Iyabo K.

2011-01-01

The construction industry is inherently risky, with a significant number of accidents and disasters occurring, particularly on confined construction sites. This research investigates and identifies the various issues affecting successful management of health and safety in confined construction sites. The rationale is that identifying the issues would assist the management of health and safety particularly in inner city centres which are mostly confined sites. Using empiricism epistemology, th...

Resolution of thermal-hydraulic safety and licensing issues for the system 80+trademark design

International Nuclear Information System (INIS)

Carpentino, S.E.; Ritterbusch, S.E.; Schneider, R.E.

1995-01-01

The System 80+ trademark Standard Design is an evolutionary Advanced Light Water Reactor (ALWR) with a generating capacity of 3931 MWt (1350 MWe). The Final Design Approval (FDA) for this design was issued by the Nuclear Regulatory Commission (NRC) in July 1994. The design certification by the NRC is anticipated by the end of 1995 or early 1996. NRC review of the System 80+ design has involved several new safety issues never before addressed in a regulatory atmosphere. In addition, conformance with the Electric Power Research Institute (EPRI) ALWR Utility Requirements Document (URD) required that the System 80+ plant address nuclear industry concerns with regard to design, construction, operation and maintenance of nuclear power plants. A large number of these issues/concerns deals with previously unresolved generic thermal-hydraulic safety issues and severe accident prevention and mitigation. This paper discusses the thermal-hydraulic analyses and evaluations performed for the System 80+ design to resolve safety and licensing issues relevant to both the Nuclear Stream Supply System (NSSS) and containment designs. For the NSSS design, the Safety Depressurization System mitigation capability and resolution of the boron dilution concern are described. Examples of containment design issues dealing with containment shell strength, robustness of the reactor cavity walls and hydrogen mixing under severe accident conditions are also provided. Finally, the overall approach used in the application of NRC's new (NUREG-1465) radiological source term for System 80+ evaluation is described. The robustness of the System 80+ containment design to withstand severe accident consequences was demonstrated through detailed thermal-hydraulic analyses and evaluations. This advanced design to shown to meet NRC severe accident policy goals and ALWR URD requirements without any special design features and unnecessary costs

Regulatory analysis for resolution of USI [Unresolved Safety Issue] A-47

International Nuclear Information System (INIS)

Szukiewicz, A.J.

1989-07-01

This report presents a summary of the regulatory analysis conducted by the US Nuclear Regulatory Commission staff to evaluate the value/impact of alternatives for the resolution of Unresolved Safety Issue A-47, ''Safety Implications of Control Systems.'' The NRC staff's resolution presented herein is based on these analyses and on the technical findings and conclusions presented in NUREG-1217, the companion document to this report. The staff has concluded that certain actions should be taken to improve safety in light-water reactor plants. The staff recommended that certain plants improve their control systems to preclude reactor vessel/steam generator overfill events and to prevent steam generator dryout, modify their technical specifications to verify operability of such systems, and modify selected emergency procedures to ensure safe shutdown of the plant following a small-break loss-of-coolant accident. This report was issued as a draft for public comment on May 27, 1988. As a result of the public comments received, this report was revised. The NRC staff's responses to and resolution of the public comments are included as Appendix C to the final report, NUREG-1217

Waste tank safety program annual status report for FY 1993, Task 5: Toxicology and epidemiology

International Nuclear Information System (INIS)

Mahlum, D.D.; Young, J.Y.

1993-09-01

A toxicology team independently reviewed analytical data and provided advice concerning potential health effects associated with exposure to tank-vapor constituents at the Hanford site. Most of the emphasis was directed toward Tank 241-C-103, but a preliminary assessment was also made of the toxicologic implication of the cyanide levels in the headspace of Tank 241-C-108. The objectives of this program are to (1) review procedures used for sampling vapors from various tanks, (2) identify constituents in tank-vapor samples that could be related to symptoms reported by waste-tank workers, (3) evaluate the toxicologic implications of those constituents by comparison to established toxicologic data bases, (4) provide advice for additional analytical efforts, and (5) support other activities as requested by the project manager and the cognizant Westinghouse Hanford Company Tank Vapor Issues Safety Resolution Manager

Editorial: emerging issues in sociotechnical systems thinking and workplace safety.

Science.gov (United States)

Noy, Y Ian; Hettinger, Lawrence J; Dainoff, Marvin J; Carayon, Pascale; Leveson, Nancy G; Robertson, Michelle M; Courtney, Theodore K

2015-01-01

The burden of on-the-job accidents and fatalities and the harm of associated human suffering continue to present an important challenge for safety researchers and practitioners. While significant improvements have been achieved in recent decades, the workplace accident rate remains unacceptably high. This has spurred interest in the development of novel research approaches, with particular interest in the systemic influences of social/organisational and technological factors. In response, the Hopkinton Conference on Sociotechnical Systems and Safety was organised to assess the current state of knowledge in the area and to identify research priorities. Over the course of several months prior to the conference, leading international experts drafted collaborative, state-of-the-art reviews covering various aspects of sociotechnical systems and safety. These papers, presented in this special issue, cover topics ranging from the identification of key concepts and definitions to sociotechnical characteristics of safe and unsafe organisations. This paper provides an overview of the conference and introduces key themes and topics. Sociotechnical approaches to workplace safety are intended to draw practitioners' attention to the critical influence that systemic social/organisational and technological factors exert on safety-relevant outcomes. This paper introduces major themes addressed in the Hopkinton Conference within the context of current workplace safety research and practice challenges.

Issues regarding Risk Effect Analysis of Digitalized Safety Systems and Main Risk Contributors

International Nuclear Information System (INIS)

Kang, Hyun Gook; Jang, Seung-Cheol

2008-01-01

Risk factors of safety-critical digital systems affect overall plant risk. In order to assess this risk effect, a risk model of a digitalized safety system is required. This article aims to provide an overview of the issues when developing a risk model and demonstrate their effect on plant risk quantitatively. Research activities in Korea for addressing these various issues, such as the software failure probability and the fault coverage of self monitoring mechanism are also described. The main risk contributors related to the digitalized safety system were determined in a quantitative manner. Reactor protection system and engineered safety feature component control system designed as part of the Korean Nuclear I and C System project are used as example systems. Fault-tree models were developed to assess the failure probability of a system function which is designed to generate an automated signal for actuating both of the reactor trip and the complicated accident-mitigation actions. The developed fault trees were combined with a plant risk model to evaluate the effect of a digitalized system's failure on the plant risk. (authors)

An Evaluation Methodology Development and Application Process for Severe Accident Safety Issue Resolution

Directory of Open Access Journals (Sweden)

Robert P. Martin

2012-01-01

Full Text Available A general evaluation methodology development and application process (EMDAP paradigm is described for the resolution of severe accident safety issues. For the broader objective of complete and comprehensive design validation, severe accident safety issues are resolved by demonstrating comprehensive severe-accident-related engineering through applicable testing programs, process studies demonstrating certain deterministic elements, probabilistic risk assessment, and severe accident management guidelines. The basic framework described in this paper extends the top-down, bottom-up strategy described in the U.S Nuclear Regulatory Commission Regulatory Guide 1.203 to severe accident evaluations addressing U.S. NRC expectation for plant design certification applications.

High level issues in reliability quantification of safety-critical software

International Nuclear Information System (INIS)

Kim, Man Cheol

2012-01-01

For the purpose of developing a consensus method for the reliability assessment of safety-critical digital instrumentation and control systems in nuclear power plants, several high level issues in reliability assessment of the safety-critical software based on Bayesian belief network modeling and statistical testing are discussed. Related to the Bayesian belief network modeling, the relation between the assessment approach and the sources of evidence, the relation between qualitative evidence and quantitative evidence, how to consider qualitative evidence, and the cause-consequence relation are discussed. Related to the statistical testing, the need of the consideration of context-specific software failure probabilities and the inability to perform a huge number of tests in the real world are discussed. The discussions in this paper are expected to provide a common basis for future discussions on the reliability assessment of safety-critical software. (author)

Review of criticality safety and shielding analysis issues for transportation packages

International Nuclear Information System (INIS)

Parks, C.V.; Broadhead, B.L.

1995-01-01

The staff of the Nuclear Engineering Applications Section (NEAS) at Oak Ridge National Laboratory (ORNL) have been involved for over 25 years with the development and application of computational tools for use in analyzing the criticality safety and shielding features of transportation packages carrying radioactive material (RAM). The majority of the computational tools developed by ORNL/NEAS have been included within the SCALE modular code system (SCALE 1995). This code system has been used throughout the world for the evaluation of nuclear facility and package designs. With this development and application experience as a basis, this paper highlights a number of criticality safety and shielding analysis issues that confront the designer and reviewer of a new RAM package. Changes in the types and quantities of material that need to be shipped will keep these issues before the technical community and provide challenges to future package design and certification

Indirect heating of natural gas using vapor chambers; Aquecimento indireto de gas natural com uso de camaras de vapor

Energy Technology Data Exchange (ETDEWEB)

Milanez, Fernando H; Mantellil, Marcia H.B.; Borges, Thomaz P.F. [Santa Catarina Univ., Florianopolis, SC (Brazil). Dept. de Engenharia Mecanica; Landa, Henrique G. de [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas

2005-07-01

Operation safety and reliability are major guidelines in the design of city-gate units. Conventional natural gas heaters operate by a indirect mechanism, where liquid water is used to transfer heat by natural convection between the combustion chamber and the natural gas coil. In this work, the concept of vapor chamber is evaluated as an indirect gas heater. In a vapor chamber, liquid water is in contact with the heat source, and vaporizes. The vapor condenses in contact with the heat sink. A reduced scale model was built and tested in order to compare these two heating concepts where the combustion chamber was replaced by electrical cartridge heaters. This engineering model can operate either as a conventional heater or as a vapor chamber. The comparison between the concepts was done by inducing a controlled power to the cartridges and by measuring the resulting temperature distributions. In the novel design, the heat exchanger efficiency increases, and the thermal inertia decreases, compared to the conventional system. The new sealed concept of the chamber prevents water evaporation losses. (author)

Safety issues of tooth whitening using peroxide-based materials.

Science.gov (United States)

Li, Y; Greenwall, L

2013-07-01

In-office tooth whitening using hydrogen peroxide (H₂O₂) has been practised in dentistry without significant safety concerns for more than a century. While few disputes exist regarding the efficacy of peroxide-based at-home whitening since its first introduction in 1989, its safety has been the cause of controversy and concern. This article reviews and discusses safety issues of tooth whitening using peroxide-based materials, including biological properties and toxicology of H₂O₂, use of chlorine dioxide, safety studies on tooth whitening, and clinical considerations of its use. Data accumulated during the last two decades demonstrate that, when used properly, peroxide-based tooth whitening is safe and effective. The most commonly seen side effects are tooth sensitivity and gingival irritation, which are usually mild to moderate and transient. So far there is no evidence of significant health risks associated with tooth whitening; however, potential adverse effects can occur with inappropriate application, abuse, or the use of inappropriate whitening products. With the knowledge on peroxide-based whitening materials and the recognition of potential adverse effects associated with the procedure, dental professionals are able to formulate an effective and safe tooth whitening regimen for individual patients to achieve maximal benefits while minimising potential risks.

Safety Culture and Issue in the Malaysian Manufacturing Sector

Directory of Open Access Journals (Sweden)

Ali Danish

2017-01-01

Full Text Available . This paper highlights the Safety culture and issue in the Malaysian Manufacturing Sector and emphasis the high occupational accidents due to lack of safety culture and non-compliance of the requirements of Occupational Safety and Health Act 1994. The aim of this study is to review the occupational accidents occurrence in the Malaysia workplace since 2012-2016. Malaysia aimed to reduce the occupational accidents, the results show by DOSH increase that Occupational Noise Induced Hearing Loss 83.7%, occupational musculoskeletal diseases, 4.4% and occupational lung diseases 2.3%. But the as per the record from DOSH that in last 5-Years, the increment in the fatal accidents by Average 26%, Permanent Disability by Average 71% and Non-Permanent Disability by 64 % are investigated only in Manufacturing Industries. The government must show their high interest on such a vulnerable employees to accomplish the above aim. This step will be helpful for planning to reduce the accidents in workplaces and it will also detect the prevention for the future accidents.

Contrast media. Safety issues and ESUR guidelines. 3. ed.

International Nuclear Information System (INIS)

Thomsen, Henrik S.; Webb, Judith A.W.

2014-01-01

Fully updates the previous edition and includes new chapters on various complex topics. Represents a unique and unparalleled source of information on the many safety issues relating to different contrast media. Includes chapters on acute and delayed non-renal adverse reactions and on renal adverse reactions. Presented in a handy, easy-to-use format. In 1994 the European Society of Urogenital Radiology (ESUR) set up a committee to consider the safety of contrast media used for diagnostic imaging. Subsequently the committee questioned ESUR members, reviewed the literature, proposed guidelines, and discussed these proposals with participants at the annual symposia of the society. The end result of this work was the successful first edition of this book, published in 2006, which was followed by an equally successful second edition in 2009. This third edition not only fully updates the previous edition, but also includes new chapters on complex topics such as use of contrast media in children and practical aspects of off-label contrast media use. The authorship includes members, past members, and non-members of the Contrast Media Safety Committee.

Special Issue. 5th Meeting on Technology and Safety

International Nuclear Information System (INIS)

Kusakabe, Masashi; Kumagaya, Tadafusa; Minohara, Shinichi

2010-01-01

The documents in this Special Issue are the representative reports of achievements presented in the National Institute of Radiological Sciences (NIRS) 5th Meeting on Technology and Safety held on March 17, 2010. Personnel and investigators of NIRS and related companies gave their achievements by 19 oral and 31 poster presentations in fields of [IAR] irradiation (2 topics), accelerator/radiometry (9 topics), [EA] experimental animals (25 topics), [SM] safety management of facilities (5 topics), computer network system (4 topics), experimental instrument (1 topic), molecular imaging (2 topics) and others (2 topics). The Issue contains, as well as introductory and ending remarks, following 12 topics: [IAR] Working report of patient positioning system for radiotherapy with use of X-ray flat panel detector; Status of maintenance and management of facilities and equipments in Research center for Radiation Emergency Medicine; [EA] Past, present and future of mouse breeding in NIRS; Breeding of marmoset in NIRS/How can we have a bouncing marmoset baby?; Establishment of a genotyping method of transformed genes in transgenic mouse/genome walking method; Genetic monitoring system of mice by micro-satellite marker and its application in NIRS; Verification of sorting precision of FACSAria (Becton Dickinson and Co.), a highly sensitive, rapid sorting apparatus of cells/for precise sorting; Proposal of a task-solution workflow to determine the animal features for molecular imaging studies; [SM] Toward the introduction of Occupational Safety and Health Management System in NIRS; Use of unsealed radioisotopes less than the lower limit outside the legal control area; Arrangement of managing and supporting system for clinical studies; and Rearrangement of working system of personnel affairs. (T.T.)

Mobile vapor recovery and vapor scavenging unit

International Nuclear Information System (INIS)

Stokes, C.A.; Steppe, D.E.

1991-01-01

This patent describes a mobile anti- pollution apparatus, for the recovery of hydrocarbon emissions. It comprises a mobile platform upon which is mounted a vapor recovery unit for recovering vapors including light hydrocarbons, the vapor recovery unit having an inlet and an outlet end, the inlet end adapted for coupling to an external source of hydrocarbon vapor emissions to recover a portion of the vapors including light hydrocarbons emitted therefrom, and the outlet end adapted for connection to a means for conveying unrecovered vapors to a vapor scavenging unit, the vapor scavenging unit comprising an internal combustion engine adapted for utilizing light hydrocarbon in the unrecovered vapors exiting from the vapor recovery unit as supplemental fuel

An approach to maintenance optimization where safety issues are important

International Nuclear Information System (INIS)

Vatn, Jorn; Aven, Terje

2010-01-01

The starting point for this paper is a traditional approach to maintenance optimization where an object function is used for optimizing maintenance intervals. The object function reflects maintenance cost, cost of loss of production/services, as well as safety costs, and is based on a classical cost-benefit analysis approach where a value of prevented fatality (VPF) is used to weight the importance of safety. However, the rationale for such an approach could be questioned. What is the meaning of such a VPF figure, and is it sufficient to reflect the importance of safety by calculating the expected fatality loss VPF and potential loss of lives (PLL) as being done in the cost-benefit analyses? Should the VPF be the same number for all type of accidents, or should it be increased in case of multiple fatality accidents to reflect gross accident aversion? In this paper, these issues are discussed. We conclude that we have to see beyond the expected values in situations with high safety impacts. A framework is presented which opens up for a broader decision basis, covering considerations on the potential for gross accidents, the type of uncertainties and lack of knowledge of important risk influencing factors. Decisions with a high safety impact are moved from the maintenance department to the 'Safety Board' for a broader discussion. In this way, we avoid that the object function is used in a mechanical way to optimize the maintenance and important safety-related decisions are made implicit and outside the normal arena for safety decisions, e.g. outside the traditional 'Safety Board'. A case study from the Norwegian railways is used to illustrate the discussions.

An approach to maintenance optimization where safety issues are important

Energy Technology Data Exchange (ETDEWEB)

Vatn, Jorn, E-mail: jorn.vatn@ntnu.n [NTNU, Production and Quality Engineering, 7491 Trondheim (Norway); Aven, Terje [University of Stavanger (Norway)

2010-01-15

The starting point for this paper is a traditional approach to maintenance optimization where an object function is used for optimizing maintenance intervals. The object function reflects maintenance cost, cost of loss of production/services, as well as safety costs, and is based on a classical cost-benefit analysis approach where a value of prevented fatality (VPF) is used to weight the importance of safety. However, the rationale for such an approach could be questioned. What is the meaning of such a VPF figure, and is it sufficient to reflect the importance of safety by calculating the expected fatality loss VPF and potential loss of lives (PLL) as being done in the cost-benefit analyses? Should the VPF be the same number for all type of accidents, or should it be increased in case of multiple fatality accidents to reflect gross accident aversion? In this paper, these issues are discussed. We conclude that we have to see beyond the expected values in situations with high safety impacts. A framework is presented which opens up for a broader decision basis, covering considerations on the potential for gross accidents, the type of uncertainties and lack of knowledge of important risk influencing factors. Decisions with a high safety impact are moved from the maintenance department to the 'Safety Board' for a broader discussion. In this way, we avoid that the object function is used in a mechanical way to optimize the maintenance and important safety-related decisions are made implicit and outside the normal arena for safety decisions, e.g. outside the traditional 'Safety Board'. A case study from the Norwegian railways is used to illustrate the discussions.

International conference on topical issues in nuclear installation safety: Continuous improvement of nuclear safety in a changing world. Book of contributed papers

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

Papers presented at this conference where devoted to the following NPP safety related topical issues: Changing environments - coping with diversity and globalisation; Operating experience - managing changes effectively; Regulatory management systems - adapting to changes in the environment; Long term operations - maintaining safety margins while extending plant lifetime.

Safety and Regulatory Issues of the Thorium Fuel Cycle

Energy Technology Data Exchange (ETDEWEB)

Ade, Brian [ORNL; Worrall, Andrew [ORNL; Powers, Jeffrey [ORNL; Bowman, Steve [ORNL; Flanagan, George [ORNL; Gehin, Jess [ORNL

2014-02-01

Thorium has been widely considered an alternative to uranium fuel because of its relatively large natural abundance and its ability to breed fissile fuel (233U) from natural thorium (232Th). Possible scenarios for using thorium in the nuclear fuel cycle include use in different nuclear reactor types (light water, high temperature gas cooled, fast spectrum sodium, molten salt, etc.), advanced accelerator-driven systems, or even fission-fusion hybrid systems. The most likely near-term application of thorium in the United States is in currently operating light water reactors (LWRs). This use is primarily based on concepts that mix thorium with uranium (UO2 + ThO2), add fertile thorium (ThO2) fuel pins to LWR fuel assemblies, or use mixed plutonium and thorium (PuO2 + ThO2) fuel assemblies. The addition of thorium to currently operating LWRs would result in a number of different phenomenological impacts on the nuclear fuel. Thorium and its irradiation products have nuclear characteristics that are different from those of uranium. In addition, ThO2, alone or mixed with UO2 fuel, leads to different chemical and physical properties of the fuel. These aspects are key to reactor safety-related issues. The primary objectives of this report are to summarize historical, current, and proposed uses of thorium in nuclear reactors; provide some important properties of thorium fuel; perform qualitative and quantitative evaluations of both in-reactor and out-of-reactor safety issues and requirements specific to a thorium-based fuel cycle for current LWR reactor designs; and identify key knowledge gaps and technical issues that need to be addressed for the licensing of thorium LWR fuel in the United States.

Assessment of policy issues in nuclear safety regulation according to circumstantial changes

Energy Technology Data Exchange (ETDEWEB)

Chang, Soon Heung; Lee, Byong Ho; Baek, Woon Pil; Lee, Seong Wook; Choi, Seong Soo; Roh, Chang Hyun; Lee, Kwang Gu [Korea Advanced Institute of Scienc and Technology, Taejon (Korea, Republic of)

1998-03-15

The objective of the work is to assess various issues in nuclear safety regulation in consideration of circumstantial changes. Emphasis is given to the safety of operating NPPs. The derivation of an effective regulation system considering 'Rhodic Safety Review (PSR)', 'operating License Renewal (LR)', 'backfitting' and 'maintenance rule' is the main objective of the first two years. It is found that those approaches should be introduced in Korea as soon as possible, with cross lingkage to maximize the effectiveness of regulation. In particular, the approaches for PSR are discussed with consultation of IAEA document and foreign practices.

Resolution of thermal-hydraulic safety and licensing issues for the system 80+{sup {trademark}} design

Energy Technology Data Exchange (ETDEWEB)

Carpentino, S.E.; Ritterbusch, S.E.; Schneider, R.E. [ABB-Combustion Engineering, Windsor, CT (United States)] [and others

1995-09-01

The System 80+{sup {trademark}} Standard Design is an evolutionary Advanced Light Water Reactor (ALWR) with a generating capacity of 3931 MWt (1350 MWe). The Final Design Approval (FDA) for this design was issued by the Nuclear Regulatory Commission (NRC) in July 1994. The design certification by the NRC is anticipated by the end of 1995 or early 1996. NRC review of the System 80+ design has involved several new safety issues never before addressed in a regulatory atmosphere. In addition, conformance with the Electric Power Research Institute (EPRI) ALWR Utility Requirements Document (URD) required that the System 80+ plant address nuclear industry concerns with regard to design, construction, operation and maintenance of nuclear power plants. A large number of these issues/concerns deals with previously unresolved generic thermal-hydraulic safety issues and severe accident prevention and mitigation. This paper discusses the thermal-hydraulic analyses and evaluations performed for the System 80+ design to resolve safety and licensing issues relevant to both the Nuclear Stream Supply System (NSSS) and containment designs. For the NSSS design, the Safety Depressurization System mitigation capability and resolution of the boron dilution concern are described. Examples of containment design issues dealing with containment shell strength, robustness of the reactor cavity walls and hydrogen mixing under severe accident conditions are also provided. Finally, the overall approach used in the application of NRC`s new (NUREG-1465) radiological source term for System 80+ evaluation is described. The robustness of the System 80+ containment design to withstand severe accident consequences was demonstrated through detailed thermal-hydraulic analyses and evaluations. This advanced design to shown to meet NRC severe accident policy goals and ALWR URD requirements without any special design features and unnecessary costs.

The critical issue of nuclear power plant safety in developing countries

International Nuclear Information System (INIS)

Rosen, M.

1977-01-01

A little more than a decade from now, large commercial nuclear power facilities will be in operation in almost 40 countries, of which approximately one-half are presently considered industrially less developed. Ambitious nuclear programmes coupled with minimal and frequently under-staffed regulatory and utility organizations are only one aspect of the difficulties related to the safety of nuclear plants that face these developing countries. Inherent problems of meeting current safety standards and requirements for the significantly non-standard nuclear power plant exports can be compounded by financial considerations that may lead to purchases of reactors of various types, from more than one supplier country and with different safety standards and requirements. An examination of these issues points to the necessity and opportunity for effective action which could include provision for adequate funding for safety considerations in the purchase contract, and for sufficient regulatory assistance and training from the developed countries. The article will introduce the topic, discuss specific examples, and offer some suggestions. (author)

Evaluation of systems interactions in nuclear power plants: Technical findings related to Unresolved Safety Issue A-17

International Nuclear Information System (INIS)

Thatcher, D.

1989-05-01

This report presents a summary of the activities related to Unresolved Safety Issue (USI)A-17, ''Systems Interactions in Nuclear Power Plants,'' and also includes the NRC staff's conclusions based on those activities. The staff's technical findings provide the framework for the final resolution of this unresolved safety issue. The final resolution will be published later as NUREG-1229. 52 refs., 4 tabs

Resolving the Ferrocyanide Safety Issue at the Hanford Site

International Nuclear Information System (INIS)

Meacham, J.E.; Cash, R.J.; Babad, H.

1994-02-01

Considerable data have been obtained on the chemical and physical properties of ferrocyanide waste stored in Hanford Site single-shell tanks (SSTs). Theoretical analyses and ferrocyanide waste simulant studies have led to the development of fuel, moisture, and temperature criteria that define continued safe storage. Developing the criteria provides the technical basis for closing the Ferrocyanide Unreviewed Safety Question (USQ). Using the safety criteria, the ferrocyanide tanks have been ranked into one of three safety categories: Safe, Conditionally Safe, and Unsafe. All the ferrocyanide tanks are currently ranked in either the Safe or Conditionally Safe categories. Analyses of core samples taken from three ferrocyanide tanks have shown cyanide concentrations about a factor of ten lower than predicted by the original flowsheets. Hydrolytic and radiolytic destruction (aging) of the ferrocyanide matrix has occurred during the 35 plus years the waste has been stored at the Hanford Site. Because of waste aging, it is possible that all of the ferrocyanide tanks may now contain less than the 8 wt % sodium nickel ferrocyanide specified in the fuel criterion for the Safe category. Ferrocyanide tanks that remain in the Conditionally Safe category may require monitoring and surveillance to verify that the waste remains in an unreactive state. Further characterization of the tanks by core sampling and analyses should lead to resolution of the Ferrocyanide Safety Issue by September 1997

Japan's regulatory and safety issues regarding nuclear materials transport

Energy Technology Data Exchange (ETDEWEB)

Saito, T. [Nuclear and Industrial Safety Agency, Ministry of Economy, Trade and Industry, Government of Japan, Tokyo (Japan); Yamanaka, T. [Japan Nuclear Energy Safety Organization, Government of Japan, Tokyo (Japan)

2004-07-01

This paper focuses on the regulatory and safety issues on nuclear materials transport which the Government of Japan (GOJ) faces and needs to well handle. Background information about the status of nuclear power plants (NPP) and nuclear fuel cycle (NFC) facilities in Japan will promote a better understanding of what this paper addresses.

Current issues and perspectives in food safety and risk assessment.

Science.gov (United States)

Eisenbrand, G

2015-12-01

In this review, current issues and opportunities in food safety assessment are discussed. Food safety is considered an essential element inherent in global food security. Hazard characterization is pivotal within the continuum of risk assessment, but it may be conceived only within a very limited frame as a true alternative to risk assessment. Elucidation of the mode of action underlying a given hazard is vital to create a plausible basis for human toxicology evaluation. Risk assessment, to convey meaningful risk communication, must be based on appropriate and reliable consideration of both exposure and mode of action. New perspectives, provided by monitoring human exogenous and endogenous exposure biomarkers, are considered of great promise to support classical risk extrapolation from animal toxicology. © The Author(s) 2015.

Tank Vapor Characterization Project. Headspace vapor characterization of Hanford Waste Tank AX-102: Results from samples collected on June 27, 1995

International Nuclear Information System (INIS)

Clauss, T.W.; Pool, K.H.; Evans, J.C.; McVeety, B.D.; Thomas, B.L.; Olsen, K.B.; Fruchter, J.S.; Ligotke, M.W.

1995-11-01

This report describes the analytical results of vapor samples taken from the headspace of the waste storage tank 241-AX-102 (Tank AX-102) at the Hanford Site in Washington State. The results described in this report were obtained to characterize the vapors present in the tank headspace and to support safety evaluations and tank-farm operations. The results include air concentrations of selected inorganic and organic analytes and grouped compounds from samples obtained by Westinghouse Hanford Company (WHC) and provided for analysis to Pacific Northwest Laboratory (PNL). Analyses were performed by the Vapor Analytical Laboratory (VAL) at PNL. Analyte concentrations were based on analytical results and, where appropriate, sample volumes provided by WHC. Detailed descriptions of the analytical results appear in the text

Patient safety issues in office-based surgery and anaesthesia in Switzerland: a qualitative study.

Science.gov (United States)

McLennan, Stuart; Schwappach, David; Harder, Yves; Staender, Sven; Elger, Bernice

2017-08-01

To identify the spectrum of patient safety issues in office-based surgery and anaesthesia in Switzerland. Purposive sample of 23 experts in surgery and anaesthesia and quality and regulation in Switzerland. Data were collected via individual qualitative interviews using a researcher-developed semi-structured interview guide between March 2016 and September 2016. Interviews were transcribed and analysed using conventional content analysis. Issues were categorised under the headings "structure", "process", and "outcome". Experts identified two key overarching patient safety and regulatory issues in relation to office-based surgery and anaesthesia in Switzerland. First, experts repeatedly raised the current lack of data and transparency of the setting. It is unknown how many surgeons are operating in offices, how many and what types of operations are being done, and what the outcomes are. Secondly, experts also noted the limited oversight and regulation of the setting. While some standards exists, most experts felt that more minimal safety standards are needed regarding the requirements that must be met to do office-based surgery and what can and cannot be done in the office-based setting are needed, but they advocated a self-regulatory approach. There is a lack of empirical data regarding the quantity and quality office-based surgery and anaesthesia in Switzerland. Further research is needed to address these research gaps and inform health policy in relation to patient safety in office-based surgery and anaesthesia in Switzerland. Copyright © 2017. Published by Elsevier GmbH.

Workshop on radioisotope safety issues in medical and academic institutions

International Nuclear Information System (INIS)

1995-03-01

The purpose of this workshop was to present current trends and recent initiatives of AECB staff members on issues relating to the regulation of radiation safety at hospitals and universities, and to invite the views of licencees on these matters. This report provides a record of presentations and discussions at this workshop. Presentation overheads are included as well as the results of workshop evaluations and a list of participants

Workshop on radioisotope safety issues in medical and academic institutions

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

The purpose of this workshop was to present current trends and recent initiatives of AECB staff members on issues relating to the regulation of radiation safety at hospitals and universities, and to invite the views of licencees on these matters. This report provides a record of presentations and discussions at this workshop. Presentation overheads are included as well as the results of workshop evaluations and a list of participants.

Tank Vapor Characterization Project: Vapor space characterization of waste Tank A-101, Results from samples collected on June 8, 1995

International Nuclear Information System (INIS)

Pool, K.H.; Clauss, T.W.; McVeety, B.D.; Evans, J.C.; Thomas, B.L.; Olsen, K.B.; Fruchter, J.S.; Ligotke, M.W.

1995-11-01

This report describes the analytical results of vapor samples taken from the headspace of the waste storage tank 241-A-101 (Tank A-101) at the Hanford Site in Washington State. The results described in this report were obtained to characterize the vapors present in the tank headspace and to support safety evaluations and tank-farm operations. The results include air concentrations of selected inorganic and organic analytes and grouped compounds from samples obtained by Westinghouse Hanford Company (WHC) and provided for analysis to Pacific Northwest National Laboratory (PNL). Analyses were performed by the Vapor Analytical Laboratory (VAL) at PNL. Analyte concentrations were based on analytical results and, where appropriate, sample volumes provided by WHC. A summary of the results is listed in Table 1. Detailed descriptions of the analytical results appear in the text

Environmental, health, and safety issues of sodium-sulfur batteries for electric and hybrid vehicles. Volume 1, Cell and battery safety

Energy Technology Data Exchange (ETDEWEB)

Ohi, J M

1992-09-01

This report is the first of four volumes that identify and assess the environmental, health, and safety issues involved in using sodium-sulfur (Na/S) battery technology as the energy source in electric and hybrid vehicles that may affect the commercialization of Na/S batteries. This and the other reports on recycling, shipping, and vehicle safety are intended to help the Electric and Hybrid Propulsion Division of the Office of Transportation Technologies in the US Department of Energy (DOE/EHP) determine the direction of its research, development, and demonstration (RD&D) program for Na/S battery technology. The reports review the status of Na/S battery RD&D and identify potential hazards and risks that may require additional research or that may affect the design and use of Na/S batteries. This volume covers cell design and engineering as the basis of safety for Na/S batteries and describes and assesses the potential chemical, electrical, and thermal hazards and risks of Na/S cells and batteries as well as the RD&D performed, under way, or to address these hazards and risks. The report is based on a review of the literature and on discussions with experts at DOE, national laboratories and agencies, universities, and private industry. Subsequent volumes will address environmental, health, and safety issues involved in shipping cells and batteries, using batteries to propel electric vehicles, and recycling and disposing of spent batteries. The remainder of this volume is divided into two major sections on safety at the cell and battery levels. The section on Na/S cells describes major component and potential failure modes, design, life testing and failure testing, thermal cycling, and the safety status of Na/S cells. The section on batteries describes battery design, testing, and safety status. Additional EH&S information on Na/S batteries is provided in the appendices.

Safety issues of dry fuel storage at RSWF

International Nuclear Information System (INIS)

Clarksean, R.L.; Zahn, T.P.

1995-01-01

Safety issues associated with the dry storage of EBR-II spent fuel are presented and discussed. The containers for the fuel have been designed to prevent a leak of fission gases to the environment. The storage system has four barriers for the fission gases. These barriers are the fuel cladding, an inner container, an outer container, and the liner at the RSWF. Analysis has shown that the probability of a leak to the environment is much less than 10 -6 per year, indicating that such an event is not considered credible. A drop accident, excessive thermal loads, criticality, and possible failure modes of the containers are also addressed

Resolution of the ferrocyanide safety issue for the Hanford site high-level waste tanks

International Nuclear Information System (INIS)

Cash, R.J.

1996-01-01

This paper describes the approach used to resolve the ferrocyanide safety issue, a process that began in 1990 after heightened concern was expressed by various government agencies about the safety of Hanford site high-level waste tanks. At the time, little was known about ferrocyanide-nitrate/nitrite reactions and the potential for offsite releases of radioactivity from the Hanford Site. Recent studies have shown that the combined effects of temperature, radiation, and pH during more than 38 years of storage have destroyed most of the ferrocyanide originally added to tanks. This has been proven in the laboratory using flowsheet-derived waste simulants and confirmed by waste samples obtained from the ferrocyanide tanks. The resulting tank waste sludges are too dilute to support a sustained exothermic reaction, even if dried out and heated to temperatures of at least 250 C. The US Department of Energy (DOE) has been requested to close the ferrocyanide safety issue

Ethical issues in engineering design processes ; regulative frameworks for safety and sustainability

NARCIS (Netherlands)

Gorp, A. van

2007-01-01

The ways designers deal with ethical issues that arise in their consideration of safety and sustainability in engineering design processes are described. In the case studies, upon which this article is based, a difference can be seen between normal and radical design. Designers refer to regulative

Guidelines for nuclear power plant safety issue prioritization information development. Supplement 3

International Nuclear Information System (INIS)

Andrews, W.B.; Bickford, W.E.; Counts, C.A.; Gallucci, R.H.V.; Heaberlin, S.W.; Powers, T.B.; Weakley, S.A.

1985-09-01

This supplemental report is the fourth in a series that document and use methods developed to calculate, for prioritization purposes, the risk, dose and cost impacts of implementing resolutions to reactor safety issues. The initial report in this series was published by Andrews et al. in 1983 as NUREG/CR-2800. This supplement consists of two parts describing separate research efforts: (1) an alternative human factors methodology approach, and (2) a prioritization of the NRC's Human Factors Program Plan. The alternative human factors methodology approach may be used in specific future cases in which the methods identified in the initial report (NUREG/CR-2800) may not adequately assess the proper impact for resolution of new safety issues. The alternative methodology included in this supplement is entitled ''Methodology for Estimating the Public Risk Reduction Affected by Human Factors Improvement.'' The prioritization section of this report is entitled ''Prioritization of the US Nuclear Regulatory Commission Human Factors Program Plan.''

Identification of new unresolved safety issues relating to nuclear power plants - special report to Congress. Congressional report

International Nuclear Information System (INIS)

1981-03-01

As a result of NRC staff review and extended collegial consultations and investigations within the NRC, the Commission has designated four new Unresolved Safety Issues (USIs). This report describes the process used to evaluate the large number of concerns and recommendations which resulted from the major investigations of the Three Mile Island-2 accident as well as other events and investigations of the past year, and the report identifies the four new USIs selected as follows: (1) Shutdown decay heat removal requirements (Task A-45); (2) Seismic qualification of equipment in operating plants (Task A-46); (3) Safety implications of control systems (Task A-47); and (4) Hydrogen control measures and effects of hydrogen burns on safety equipment (Task A-48). Appendix A of the report presents an expanded discussion of each new USI including issue definition, a preliminary discussion of the action plan and a basis for continued plant operations and licensing. Appendix B of the report provides a brief discussion of each of the candidate safety issues not designated as an USI

Food safety issues in China: a case study of the dairy sector.

Science.gov (United States)

Dong, Xiaoxia; Li, Zhemin

2016-01-15

Over the past 10 years, food safety incidents have occurred frequently in China. Food safety issues in the dairy sector have increasingly gained the attention of the Chinese government and the public. The objective of this research is to explore consumption changes of dairy products of different income groups after these dairy safety incidents. The research indicates that consumers' response to dairy safety risk is very intense. Dairy consumption has experienced a declining trend in recent years, and the impact of dairy safety incidents has lasted for at least 5 years. Until 2012, dairy consumption had not yet fully recovered from this influence. Using the random effects model, this study examined the relationship between food safety incident and consumption. Overall, the results show that consumers in the low-income group are more sensitive to safety risk than those in the high-income group. It can be seen from this paper that the decrease of urban residents' dairy consumption was mainly driven by changes in fresh milk consumption, while the decline of milk powder consumption, which was affected by the melamine incident, was relatively moderate, and milk powder consumption for the high-income group even increased. © 2015 Society of Chemical Industry.

A digest of the Nuclear Safety Division report on the Fukushima Dai-ichi accident seminar (4). Issues identified by the accident

International Nuclear Information System (INIS)

Moriyama, Kumiaki; Abe, Kiyoharu

2013-01-01

AESJ Nuclear Safety Division published 'Report on the Fukushima Dai-ichi Accident Seminar - what was wrong and what should been down in future-' which would be published as five special articles of the AESJ journal. The Fukushima Dai-ichi accident identified issues of several activities directly related with nuclear safety in the areas of safety design, severe accident management and safety regulations. PRA, operational experiences and safety research could not always contribute safety assurance of nuclear power plant so much. This article (4) summarized technical issues based on related facts of the accident as much as possible and discussed' what was wrong and what should be down in future'. Important issues were identified from defense-in-depth philosophy and lessons learned on safety design were obtained from accident progression analysis. Activities against external events and continuous improvements of safety standards based on latest knowledge were most indispensable. Strong cooperation among experts in different areas was also needed. (T. Tanaka)

Tank Vapor Characterization Project: Headspace vapor characterization of Hanford Waste Tank U-203, Results from samples collected on August 8, 1995

International Nuclear Information System (INIS)

Pool, K.H.; Clauss, T.W.; Evans, J.C.; McVeety, B.D.; Thomas, B.L.; Olsen, K.B.; Fruchter, J.S.; Ligotke, M.W.

1995-11-01

This report describes the analytical results of vapor samples taken from the headspace of the waste storage tank 241-U-203 (Tank U-203) at the Hanford Site in Washington State. The results described in this report were obtained to characterize the vapors present in the tank headspace and to support safety evaluations and tank-farm operations. The results include air concentrations of selected inorganic and organic analytes and grouped compounds from samples obtained by Westinghouse Hanford Company (WHC) and provided for analysis to Pacific Northwest Laboratory (PNL). Analyses were performed by the Vapor Analytical Laboratory (VAL) at PNL. Analyte concentrations were based on analytical results and, where appropriate, sample volumes provided by WHC. A summary of the results is listed. Detailed descriptions of the analytical results appear in the text

Tank Vapor Characterization Project: Headspace vapor characterization of Hanford Waste Tank U-204, Results from samples collected on August 8, 1995

International Nuclear Information System (INIS)

Clauss, T.W.; Evans, J.C.; McVeety, B.D.; Pool, K.H.; Thomas, B.L.; Olsen, K.B.; Fruchter, J.S.; Ligotke, M.W.

1995-11-01

This report describes the analytical results of vapor samples taken from the headspace of the waste storage tank 241-U-204 (Tank U-204) at the Hanford Site in Washington State. The results described in this report were obtained to characterize the vapors present in the tank headspace and to support safety evaluations and tank-farm operations. The results include air concentrations of selected inorganic and organic analytes and grouped compounds from samples obtained by Westinghouse Hanford Company (WHC) and provided for analysis to Pacific Northwest National Laboratory (PNL). Analyses were performed by the Vapor Analytical Laboratory (VAL) at PNL. Analyte concentrations were based on analytical results and, where appropriate, sample volumes provided by WHC. A summary of the results is listed. Detailed descriptions of the analytical results appear in the text

Compiler issues associated with safety-related software

International Nuclear Information System (INIS)

Feinauer, L.R.

1991-01-01

A critical issue in the quality assurance of safety-related software is the ability of the software to produce identical results, independent of the host machine, operating system, or compiler version under which the software is installed. A study is performed using the VIPRE-0l, FREY-01, and RETRAN-02 safety-related codes. Results from an IBM 3083 computer are compared with results from a CYBER 860 computer. All three of the computer programs examined are written in FORTRAN; the VIPRE code uses the FORTRAN 66 compiler, whereas the FREY and RETRAN codes use the FORTRAN 77 compiler. Various compiler options are studied to determine their effect on the output between machines. Since the Control Data Corporation and IBM machines inherently represent numerical data differently, methods of producing equivalent accuracy of data representation were an important focus of the study. This paper identifies particular problems in the automatic double-precision option (AUTODBL) of the IBM FORTRAN 1.4.x series of compilers. The IBM FORTRAN version 2 compilers provide much more stable, reliable compilation for engineering software. Careful selection of compilers and compiler options can help guarantee identical results between different machines. To ensure reproducibility of results, the same compiler and compiler options should be used to install the program as were used in the development and testing of the program

Tank Vapor Characterization Project: Headspace vapor characterization of Hanford waste tank 241-S-101: Results from samples collected on 06/06/96

International Nuclear Information System (INIS)

Thomas, B.L.; Evans, J.C.; Pool, K.H.; Olsen, K.B.; Fruchter, J.S.; Silvers, K.L.

1997-01-01

This report describes the analytical results of vapor samples taken from the headspace of the waste storage tank 241-S-101. The results described in this report were obtained to characterize the vapors present in the tank headspace and to support safety evaluations and tank farm operations. The results include air concentrations of selected inorganic and organic analytes and grouped compounds from samples obtained. Analyte concentrations were based on analytical results and sample volumes provided by WHC. A summary of the inorganic analytes, permanent gases, and total non-methane organic compounds is listed

Safety issues to be taken into account in designing future nuclear fusion facilities

Energy Technology Data Exchange (ETDEWEB)

Perrault, Didier, E-mail: didier.perrault@irsn.fr

2016-11-01

Highlights: • Assess if decay heat removal is a safety function. • Re-study accidents considered for ITER and identify those specific to DEMO. • Limit tritium inventory and optimize main gaseous tritium release routes. • Take into account constraints related to requirements of waste disposal routes. - Abstract: For several years now, the French “Institut de Radioprotection et de Sûreté Nucléaire” has been carrying out expertise of ITER fusion facility safety files at the request of the French “Autorité de Sûreté Nucléaire”. As part of the lengthy process which should lead to mastering nuclear fusion, different fusion facility projects are currently under study throughout the world to be ready to continue building on the work which will take place in the ITER facility. On the basis of the experience acquired during the ITER safety expertise, the IRSN has carried out a preliminary study of the safety issues which seem necessary to take into account right from the earliest design phase of these DEMO facilities. The issues studied have included the decay heat removal, exposure to ionizing radiation, potential accidents, and effluent releases and waste. The study shows that it will be important to give priority to the following actions, given that their results would have a major influence on the design: assess if decay heat removal is a safety function, re-study the accidents considered in the context of the ITER project and identify those specific to DEMO, and optimize each of the main routes for gaseous tritium releases.

Effects of the Smartphone Application "Safe Patients" on Knowledge of Patient Safety Issues Among Surgical Patients.

Science.gov (United States)

Cho, Sumi; Lee, Eunjoo

2017-12-01

Recently, the patient's role in preventing adverse events has been emphasized. Patients who are more knowledgeable about safety issues are more likely to engage in safety initiatives. Therefore, nurses need to develop techniques and tools that increase patients' knowledge in preventing adverse events. For this reason, an educational smartphone application for patient safety called "Safe Patients" was developed through an iterative process involving a literature review, expert consultations, and pilot testing of the application. To determine the effect of "Safe Patients," it was implemented for patients in surgical units in a tertiary hospital in South Korea. The change in patients' knowledge about patient safety was measured using seven true/false questions developed in this study. A one-group pretest and posttest design was used, and a total of 123 of 190 possible participants were tested. The percentage of correct answers significantly increased from 64.5% to 75.8% (P effectively improve patients' knowledge of safety issues. This will ultimately empower patients to engage in safe practices and prevent adverse events related to surgery.

Environmental, health, and safety issues of sodium-sulfur batteries for electric and hybrid vehicles. Volume 4, In-vehicle safety

Energy Technology Data Exchange (ETDEWEB)

Mark, J.

1992-11-01

This report is the last of four volumes that identify and assess the environmental, health, and safety issues that may affect the commercial-scale use of sodium-sulfur (Na/S) battery technology as the energy source in electric and hybrid vehicles. The reports are intended to help the Electric and Hybrid Propulsion Division of the Office of Transportation Technologies in the US Department of Energy (DOE/EHP) determine the direction of its research, development, and demonstration (RD&D) program for Na/S battery technology. The reports review the status of Na/S battery RD&D and identify potential hazards and risks that may require additional research or that may affect the design and use of Na/S batteries. This volume covers the in-vehicle safety issues of electric vehicles powered by Na/S batteries. The report is based on a review of the literature and on discussions with experts at DOE, national laboratories and agencies, and private industry. It has three major goals: (1) to identify the unique hazards associated with electric vehicle (EV) use; (2) to describe the existing standards, regulations, and guidelines that are or could be applicable to these hazards; and (3) to discuss the adequacy of the existing requirements in addressing the safety concerns of EVs.

Progress and Updates of Regulatory Challenges and Safety Issues in Korea during Three Years after Fukushima Accident

International Nuclear Information System (INIS)

Lee, Young Eal; Kim, Kyun Tae

2014-01-01

Before the public fear on radiation risk caused by neighboring country's severe accident disappeared, a series of nuclear safety issues last 3 years made a few reactors shut down and the public trust much lower than before. Because of these scandals such as cover-ups, forged certificated items, corruption of manager of licensee and so on, many efforts made during three year after Fukushima accident on improving the nuclear safety were invalidated and even regulators as well as operators have been sharply criticized for its responsibility and transparency. This paper shares information on the progress and uprates achieved in Korea so far in connection with the safety issues caused during last 3 years and actions taken by the regulatory body. Before the public fear on radiation risk caused by neighboring country's severe accident disappeared, a series of nuclear safety issues last 3 years made a few reactors shut down and the public trust much lower than before. Because of these scandals such as cover-ups, forged certificated items, corruption of manager of licensee and so on, many efforts made during three year after Fukushima accident on improving the nuclear safety were invalidated and even regulators as well as operators have been sharply criticized for its responsibility and transparency

Progress and Updates of Regulatory Challenges and Safety Issues in Korea during Three Years after Fukushima Accident

Energy Technology Data Exchange (ETDEWEB)

Lee, Young Eal; Kim, Kyun Tae [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2014-10-15

Before the public fear on radiation risk caused by neighboring country's severe accident disappeared, a series of nuclear safety issues last 3 years made a few reactors shut down and the public trust much lower than before. Because of these scandals such as cover-ups, forged certificated items, corruption of manager of licensee and so on, many efforts made during three year after Fukushima accident on improving the nuclear safety were invalidated and even regulators as well as operators have been sharply criticized for its responsibility and transparency. This paper shares information on the progress and uprates achieved in Korea so far in connection with the safety issues caused during last 3 years and actions taken by the regulatory body. Before the public fear on radiation risk caused by neighboring country's severe accident disappeared, a series of nuclear safety issues last 3 years made a few reactors shut down and the public trust much lower than before. Because of these scandals such as cover-ups, forged certificated items, corruption of manager of licensee and so on, many efforts made during three year after Fukushima accident on improving the nuclear safety were invalidated and even regulators as well as operators have been sharply criticized for its responsibility and transparency.

Tank 241-B-103 headspace gas and vapor characterization results for samples collected in February 1995

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-01-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-BX-104 headspace gas and vapor characterization results for samples collected in December 1994

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-01-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-U-203 headspace gas and vapor characterization results for samples collected in August 1995

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-09-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-C-106 headspace gas and vapor characterization results for samples collected in February 1994

International Nuclear Information System (INIS)

Hackaby, J.L.; Bratzel, D.R.

1995-01-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-S-111 headspace gas and vapor characterization results for samples collected in March 1995

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-09-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-U-103 headspace gas and vapor characterization results for samples collected in February 1995

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-01-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-SX-106 headspace gas and vapor characterization results for samples collected in March 1995

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-09-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-C-104 headspace gas and vapor characterization results for samples collected in March 1994

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-01-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-TX-105 headspace gas and vapor characterization results for samples collected in December 1995

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-01-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-C-102 headspace gas and vapor characterization results for samples collected in August 1994

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-09-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-BY-112 headspace gas and vapor characterization results for samples collected in November 1994

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-01-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-T-111 headspace gas and vapor characterization results for samples collected in January 1995

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-09-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-SX-103 headspace gas and vapor characterization results for samples collected in March 1995

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-09-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-TY-104 headspace gas and vapor characterization results for samples collected in April 1995

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-09-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-C-110 headspace gas and vapor characterization results for samples collected in August 1994

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-09-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-C-101 headspace gas and vapor characterization results for samples collected in September 1994

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-09-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-C-107 headspace gas and vapor characterization results for samples collected in September 1994

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-01-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Lessons Learned and Regulatory Countermeasures of Nuclear Safety Issues Last Year

Energy Technology Data Exchange (ETDEWEB)

Lee, Y. E. [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2013-05-15

Competitiveness of nuclear as the electric resource in terms of the least cost and the carbon abatement has been debated. Some institutions insist that the radioactive wastes management cost, nuclear accident cost and cheap shale gas would make the nuclear energy less competitive, while others still address the ability of nuclear energy as economical and low-carbon electric resource. This situation reminds that ensuring nuclear safety is the most important prerequisite to use of nuclear energy. Therefore, this paper will compare the different views on future nuclear competitiveness discussed right after the Fukushima accident and summarize the lessons learned and regulatory countermeasures from nuclear safety issues last year. Korea has improved the effectiveness of safety regulation up to now and still has been making efforts on further enhancing nuclear safety. The outcomes of these efforts have resulted in a high level of safety in Korean NPPs and contributing largely to the global nuclear safety through sharing and exchanging the information and knowledge of our nuclear experiences. However, now we are faced with the new challenges such as decreasing the public. Additionally, public criticism of the regulatory activities demands more clear regulatory guides and transparent process. Recently, new president announced the 'Priority to Safety and Public Trust' as the precondition to utilize the nuclear energy. We will continue to make much more efforts for the improvement of the quality of regulatory activities and effectiveness of regulatory decision making process than we have done so far. Competence through effective capacity building would be a helpful pathway to build up the public trust and ensure the acceptable level of nuclear safety. We are set to prepare the action items to be taken in the near future for improving the technical competency and transparency as the essential components of the national safety and will make efforts to implement them

Maintenance as a safety issue.

Science.gov (United States)

White, Jim

2008-11-01

Because safety is related to electrical power systems maintenance, it seems reasonable to assume there could be legal issues if maintenance is not performed. OSHA has not yet taken the stand that not performing maintenance as required by the manufacturer, NFPA 70B, or ANSI/NETA MTS-07 constitutes a willful violation. OSHA defines a willful citation as one where: "the employer knowingly commits with plain indifference to the law. The employer either knows that what he or she is doing constitutes a violation, or is aware that a hazardous condition existed and made no reasonable effort to eliminate it". However, NFPA 70E 2009 requires this maintenance, and OSHA has stated on its Web site that NFPA 70E is "a guide for meeting the requirements of the OSHA electrical regulations". In addition, federal courts have found that NFPA 70E is "standard industry practice." Once a company receives and accepts a willful citation, especially if received as the result of an accident investigation, its worker's compensation protection no longer shields it. One definition given by a trial attorney for a willful citation was that it is equal to negligent behavior. Be smart: Maintain that equipment and save yourself major problems, including unscheduled shutdowns and possible litigation.

Databases on safety issues for WWER and RBMK reactors. Users' manual. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

International Nuclear Information System (INIS)

1996-04-01

At the beginning of the IAEA Extrabudgetary Programme on the safety of WWER reactors a great number of findings and recommendations (safety items) were collected as a result of design review and safety review missions of the WWER-440/230 type reactors. On the basis of these findings a technical database containing more than 1300 records was established to support the consolidation of the information obtained and to help in identification of safety issues. After the scope of the WWER extrabudgetary programme was extended similar data sets were prepared for the WWER-440/213, WWER-1000 and RBMK nuclear power plants. This publication describes the structure of the databases on safety issues of WWER and RBMK NPPs, the information sources used in the databases and interrogation capabilities for users to obtain the necessary information. 14 refs, 9 figs, 5 tabs

Conclusions and Recommendations of the IAEA International Conference on Topical Issues in Nuclear Safety: Ensuring Safety for Sustainable Nuclear Development

International Nuclear Information System (INIS)

El-Shanawany, Mamdouh

2011-01-01

programmes. National safety authorities could take the initiative of organizing international workshops on how OEF has been used and implemented. Moreover, lessons learned from new construction should be provided and shared between all countries embarking and considering new build. 5. It is vital in today's environment that the synergies between safety and security are maximized, and that culture be developed that integrates safety and security requirements. Safety and security have the same purpose: protecting people, society, environment and both could be based on similar principles even if there are some differences in implementation such as openness and transparency. There are important advantages from integrating the regulation of safety and security as much as possible. 6. The quality of the supply chain is an emerging issue. Harmonization of safety requirements, design codes and quality standards within the supply chain is acknowledged as requiring further collaboration among Member States, international organizations and supplier companies. Multinational Design Evaluation Programme (MDEP) is an important first step towards this goal. 7. Transparency, collaboration, information sharing and openness is responsibility of all Member States to assure not only safety but to foster confidence and trust among all stakeholders. 8. Despite NPPs high level of safety, emergency preparedness and response is an important issue in the context of developing nuclear energy. Through international cooperation, emergency and response plans need to be developed and well coordinated within all relevant entities. 9. In the context of developing nuclear energy the generation gap in education and training as well as the necessity to build technical capacity to properly address safety issues has been acknowledged by the Conference. Therefore, adequate education and training programmes should be developed and implemented.

Main Conclusions and Recommendations of International Conference on Topical Issues in Nuclear Installation Safety: Ensuring Safety for Sustainable Nuclear Development

International Nuclear Information System (INIS)

El-Shanawany, Mamdouh

2011-01-01

programmes. National safety authorities could take the initiative of organizing international workshops on how OEF has been used and implemented. Moreover, lessons learned from new construction should be provided and shared between all countries embarking and considering new build. 5. It is vital in today's environment that the synergies between safety and security are maximized, and that culture be developed that integrates safety and security requirements. Safety and security have the same purpose: protecting people, society, environment and both could be based on similar principles even if there are some differences in implementation such as openness and transparency. There are important advantages from integrating the regulation of safety and security as much as possible. 6. The quality of the supply chain is an emerging issue. Harmonization of safety requirements, design codes and quality standards within the supply chain is acknowledged as requiring further collaboration among Member States, international organizations and supplier companies. Multinational Design Evaluation Programme (MDEP) is an important first step towards this goal. 7. Transparency, collaboration, information sharing and openness is responsibility of all Member States to assure not only safety but to foster confidence and trust among all stakeholders. 8. Despite NPPs high level of safety, emergency preparedness and response is an important issue in the context of developing nuclear energy. Through international cooperation, emergency and response plans need to be developed and well coordinated within all relevant entities. 9. In the context of developing nuclear energy the generation gap in education and training as well as the necessity to build technical capacity to properly address safety issues has been acknowledged by the Conference. Therefore, adequate education and training programmes should be developed and implemented.

The R and D issues necessary to achieve the safety design of commercialized liquid-metal cooled fast reactors

International Nuclear Information System (INIS)

Shoji, Kotake; Koji, Dozaki; Shigenobu, Kubo; Yoshio, Shimakawa; Hajime, Niwa; Masakazu, Ichimiya

2002-01-01

Within the framework of the feasibility study on commercialized fast reactor cycle systems (hereafter described as F/S), the safety design principle is investigated and several kinds of design studies are now in progress. Among the designs for liquid-metal cooled fast reactor (LMR), the advanced loop type sodium cooled fast reactor (FR) is one of the promising candidate as future commercialized LMR. In this paper, the safety related research and development (R and D) issues necessary to achieve the safety design are described along the defence-in-depth principle, taking account of not only the system characteristics of the advanced loop concepts but also design studies and R and D experiences so far. Safety issues related to the hypothetical core disruptive accidents (CDA) are emphasized both from the prevention and mitigation. A re-criticality free core concept with a special fuel assembly is pursued by performing both analytical and experimental efforts, in order to realize the rational design and to establish easy-to-understand safety logic. Sodium related issues are also given to ensure plant availability and to enhance the acceptability to the public. (authors)

Strategy for resolution of the Flammable Gas Safety Issue

International Nuclear Information System (INIS)

Johnson, G.D.

1995-01-01

The purpose of this document is to provide the general strategy for resolution of the flammable gas safety issue; it is not a detailed description of program activities. budgets and schedules. Details of the program activities have been issued (Johnson and Sherwood, 1994) and the information pertaining to budgets is provided in the FY 1995-1997 Multi-Year Work Plan for Tank Waste Remediation System (TWRS) (Program Element 1.1.1.2.02.). The key element in this strategy is to provide an understanding of the behavior of each of the Flammable Gas Watch List tanks. While a review of historical information does provide some insight, it is necessary to gather current information about the gases, behavior and nature of the waste,. and about the control systems that maintain and monitor the waste. Analysis of this information will enable TWRS to determine the best approach to place any tank in a safe condition, if it is found to be in an unsafe state

HTGR Dust Safety Issues and Needs for Research and Development

Energy Technology Data Exchange (ETDEWEB)

Paul W. Humrickhouse

2011-06-01

This report presents a summary of high temperature gas-cooled reactor dust safety issues. It draws upon a literature review and the proceedings of the Very High Temperature Reactor Dust Assessment Meeting held in Rockville, MD in March 2011 to identify and prioritize the phenomena and issues that characterize the effect of carbonaceous dust on high temperature reactor safety. It reflects the work and input of approximately 40 participants from the U.S. Department of Energy and its National Labs, the U.S. Nuclear Regulatory Commission, industry, academia, and international nuclear research organizations on the topics of dust generation and characterization, transport, fission product interactions, and chemical reactions. The meeting was organized by the Idaho National Laboratory under the auspices of the Next Generation Nuclear Plant Project, with support from the U.S. Nuclear Regulatory Commission. Information gleaned from the report and related meetings will be used to enhance the fuel, graphite, and methods technical program plans that guide research and development under the Next Generation Nuclear Plant Project. Based on meeting discussions and presentations, major research and development needs include: generating adsorption isotherms for fission products that display an affinity for dust, investigating the formation and properties of carbonaceous crust on the inside of high temperature reactor coolant pipes, and confirming the predominant source of dust as abrasion between fuel spheres and the fuel handling system.

Vapor pressures and enthalpies of vaporization of azides

International Nuclear Information System (INIS)

Verevkin, Sergey P.; Emel'yanenko, Vladimir N.; Algarra, Manuel; Manuel Lopez-Romero, J.; Aguiar, Fabio; Enrique Rodriguez-Borges, J.; Esteves da Silva, Joaquim C.G.

2011-01-01

Highlights: → We prepared and measured vapor pressures and vaporization enthalpies of 7 azides. → We examined consistency of new and available in the literature data. → Data for geminal azides and azido-alkanes selected for thermochemical calculations. - Abstract: Vapor pressures of some azides have been determined by the transpiration method. The molar enthalpies of vaporization Δ l g H m of these compounds were derived from the temperature dependencies of vapor pressures. The measured data sets were successfully checked for internal consistency by comparison with vaporization enthalpies of similarly structured compounds.

Safety culture and organisational issues specific to the transitional phase from operation to decommissioning of the Ignalina Nuclear Power Plant

International Nuclear Information System (INIS)

Medeliene, D.

2005-01-01

The PHARE project Support to State Nuclear Power Safety Inspectorate for safety culture and organisational issues specific to the pre-shutdown phase of Ignalina Nuclear Power Plant was aimed at providing assistance to VATESI in their task to oversee that the Ignalina Nuclear Power Plant's management and staff are able to provide an acceptable level of reactor safety taking into account possible safety culture related problems that may occur due to the decision of an early closure of both units. Safety culture is used as a concept to characterise the attitudes, behaviour and perceptions of people that are important in ensuring the safety of nuclear power facility. Since the Chernobyl accident, the International Atomic Energy Agency (IAEA) has been active in creating guidance for ensuring that an adequate safety culture can be created and maintained. The transition from operation to decommissioning introduces uncertainty for both the organisation and individuals. This creates new challenges that need to be dealt with. Although safety culture and organisational issues have to be addressed during the entire life cycle of a nuclear power plant, owing to these special challenges, it should be especially highlighted during the transitional period from operation to decommissioning. Nuclear safety experts from Sweden, Finland, Italy, the UK and Germany, as well as Lithuanian specialists, participated in the project, and it proved to be a most effective way to share experience. The aim of this brochure is to provide information about: the importance of safety culture issues during the transitional phase from operation to decommissioning of Ignalina Nuclear Power Plant; the purpose, activities and results of this PHARE project; recommendations that are provided by western experts concerning the management of safety culture issues specific to the pre-decommissioning phase of Ignalina Nuclear Power Plant. (author)

Current Status of Health and Safety Issues of Sodium/Metal Chloride (Zebra) Batteries

International Nuclear Information System (INIS)

David Trickett

1998-01-01

This report addresses environmental, health, and safety (EH ampersand S) issues associated with sodium/ metal chloride batteries, in general, although most references to specific cell or battery types refer to units developed or being developed under the Zebra trademark. The report focuses on issues pertinent to sodium/metal chloride batteries and their constituent components; however, the fact that some ''issues'' arise from interaction between electric vehicle (EV) and battery design com- pels occasional discussion amid the context of EV vehicle design and operation. This approach has been chosen to provide a reasonably comprehensive account of the topic from a cell technology perspective and an applications perspective

Current Status of Health and Safety Issues of Sodium/Metal Chloride (Zebra) Batteries

Energy Technology Data Exchange (ETDEWEB)

Trickett, D.

1998-12-15

This report addresses environmental, health, and safety (EH&S) issues associated with sodium/ metal chloride batteries, in general, although most references to specific cell or battery types refer to units developed or being developed under the Zebra trademark. The report focuses on issues pertinent to sodium/metal chloride batteries and their constituent components; however, the fact that some ''issues'' arise from interaction between electric vehicle (EV) and battery design compels occasional discussion amid the context of EV vehicle design and operation. This approach has been chosen to provide a reasonably comprehensive account of the topic from a cell technology perspective and an applications perspective.

Environmental, health, and safety issues of sodium-sulfur batteries for electric and hybrid vehicles

Energy Technology Data Exchange (ETDEWEB)

Ohi, J.M.

1992-09-01

This report is the first of four volumes that identify and assess the environmental, health, and safety issues involved in using sodium-sulfur (Na/S) battery technology as the energy source in electric and hybrid vehicles that may affect the commercialization of Na/S batteries. This and the other reports on recycling, shipping, and vehicle safety are intended to help the Electric and Hybrid Propulsion Division of the Office of Transportation Technologies in the US Department of Energy (DOE/EHP) determine the direction of its research, development, and demonstration (RD D) program for Na/S battery technology. The reports review the status of Na/S battery RD D and identify potential hazards and risks that may require additional research or that may affect the design and use of Na/S batteries. This volume covers cell design and engineering as the basis of safety for Na/S batteries and describes and assesses the potential chemical, electrical, and thermal hazards and risks of Na/S cells and batteries as well as the RD D performed, under way, or to address these hazards and risks. The report is based on a review of the literature and on discussions with experts at DOE, national laboratories and agencies, universities, and private industry. Subsequent volumes will address environmental, health, and safety issues involved in shipping cells and batteries, using batteries to propel electric vehicles, and recycling and disposing of spent batteries. The remainder of this volume is divided into two major sections on safety at the cell and battery levels. The section on Na/S cells describes major component and potential failure modes, design, life testing and failure testing, thermal cycling, and the safety status of Na/S cells. The section on batteries describes battery design, testing, and safety status. Additional EH S information on Na/S batteries is provided in the appendices.

LMFBR safety. 5. Review of current issues and bibliography of literature (1975--1976)

International Nuclear Information System (INIS)

Buchanan, J.R.; Keilholtz, G.W.

1977-01-01

The current status of liquid-metal fast breeder reactor (LMFBR) development and one of the principal safety issues, a hypothetical core-disruptive accident (HCDA), are discussed. Bibliographic information on worldwide LMFBRs relative to the development and safety of the breeder reactor is presented for the period 1975 through 1976. The bibliography consists of approximately 1618 abstracts covering early research and development and operating experiences leading up to the present design practices that are necessary for the licensing of breeder reactors. Keyword, author, and permuted-title indexes are included for completeness

LMFBR safety. 5. Review of current issues and bibliography of literature (1975--1976)

Energy Technology Data Exchange (ETDEWEB)

Buchanan, J.R.; Keilholtz, G.W.

1977-06-08

The current status of liquid-metal fast breeder reactor (LMFBR) development and one of the principal safety issues, a hypothetical core-disruptive accident (HCDA), are discussed. Bibliographic information on worldwide LMFBRs relative to the development and safety of the breeder reactor is presented for the period 1975 through 1976. The bibliography consists of approximately 1618 abstracts covering early research and development and operating experiences leading up to the present design practices that are necessary for the licensing of breeder reactors. Keyword, author, and permuted-title indexes are included for completeness.

Overview of safety and environmental issues for inertial fusion energy

International Nuclear Information System (INIS)

Piet, S.J.; Brereton, S.J.; Tanaka, S.

1996-01-01

This paper summarizes safety and environmental issues of Inertial Fusion Energy (IFE): inventories, effluents, maintenance, accident safety, waste management, and recycling. The fusion confinement approach among inertial and magnetic options affects how the fusion reaction is maintained and which materials surround the reaction chamber. The target fill technology has a major impact on the target factory tritium inventory. IFE fusion reaction chambers usually employ some means to protect the first structural wall from fusion pulses. This protective fluid or granular bed also moderates and absorbs most neutrons before they reach the first structural wall. Although the protective fluid activates, most candidate fluids have low activation hazard. Hands-on maintenance seems practical for the driver, target factory, and secondary coolant systems; remote maintenance is likely required for the reaction chamber, primary coolant, and vacuum exhaust cleanup systems. The driver and fuel target facility are well separated from the main reaction chamber

Health safety issues of synthetic food colorants.

Science.gov (United States)

Amchova, Petra; Kotolova, Hana; Ruda-Kucerova, Jana

2015-12-01

Increasing attention has been recently paid to the toxicity of additives used in food. The European Parliament and the Council published the REGULATION (EC) No. 1333/2008 on food additives establishing that the toxicity of food additives evaluated before 20th January 2009 must be re-evaluated by European Food Safety Authority (EFSA). The aim of this review is to survey current knowledge specifically on the toxicity issues of synthetic food colorants using official reports published by the EFSA and other available studies published since the respective report. Synthetic colorants described are Tartrazine, Quinoline Yellow, Sunset Yellow, Azorubine, Ponceau 4R, Erythrosine, Allura Red, Patent Blue, Indigo Carmine, Brilliant Blue FCF, Green S, Brilliant Black and Brown HT. Moreover, a summary of evidence on possible detrimental effects of colorant mixes on children's behaviour is provided and future research directions are outlined. Copyright © 2015 Elsevier Inc. All rights reserved.

Advanced CFD simulation for the assessment of nuclear safety issues at EDF. Some examples

International Nuclear Information System (INIS)

Vare, Christophe

2014-01-01

EDF R and D has computer power that puts it amongst the top industrial research centers in the world. Its supercomputers and in-house codes as well as its experts represent important capabilities to support EDF activities (safety analyses, support to the design of new reactors, analysis of accidental situations non reproducible by experiments, better understanding of physics or complex system response, effects of uncertainties and identification of prominent parameters, qualification and optimization of processes and materials...). Advanced numerical simulation is a powerful tool allowing EDF to increase its competitiveness, improve its performance and the safety of its plants. On this issue, EDF made the choice to develop its own in-house codes, instead of using commercial software, in order to be able to capitalize its expertise and methodologies. This choice allowed as well easier technological transfer to the concerned business units or engineering divisions, fast adaptation of our simulation tools to emerging needs and the development of specific physics or functionalities not addressed by the commercial offer. During the last ten years, EDF has decided to open its in-house codes, through the Open Source way. This is the case for Code – Aster (structure analysis), Code – Saturne (computational fluid dynamics, CFD), TELEMAC (flow calculations in aquatic environment), SALOME (generic platform for Pre and Post-Processing) and SYRTHES (heat transfer in complex geometries), among others. The 3 open source software: Code – Aster, Code – Saturne and TELEMAC, are certified by the French Nuclear Regulatory Authority for many «Important to Safety» studies. Advanced simulation, which treats complex, multi-field and multi-physics problems, is of great importance for the assessment of nuclear safety issues. This paper will present 2 examples of advanced simulation using Code – Saturne for safety issues of nuclear power plants in the fields of R and D and

Vaporization Rate Analysis of Primary Cooling Water from Reactor PUSPATI TRIGA (RTP) Tank

International Nuclear Information System (INIS)

Tonny Anak Lanyau; Mohd Fazli Zakaria; Yahya Ismail

2011-01-01

Primary cooling system consists of pumps, heat exchangers, probes, a nitrogen-16 diffuser and associated valves is connected to the reactor TRIGA PUSPATI (RTP) tank by aluminium pipes. Both the primary cooling system and the reactor tank is filled with demineralized light water (H 2 O), which serves as a coolant, moderator as well as shielding. During reactor operation, vaporization in the reactor tank will reduce the primary water and contribute to the formation of vapor in the reactor hall. The vaporization may influence the function of the water subsequently may affect the safety of the reactor operation. It is essential to know the vaporization rate of the primary water to ensure its functionality. This paper will present the vaporization rate of the primary cooling water from the reactor tank and the influence of temperature of the water in the reactor tank to the vaporization rate. (author)

Chemical Hazards and Safety Issues in Fusion Safety Design

International Nuclear Information System (INIS)

Cadwallader, L.C.

2003-01-01

Radiological inventory releases have dominated accident consequences for fusion; these consequences are important to analyze and are generally the most severe result of a fusion facility accident event. However, the advent of, or plan for, large-scale usage of some toxic materials poses the additional hazard of chemical exposure from an accident event. Examples of toxic chemicals are beryllium for magnetic fusion and fluorine for laser fusion. Therefore, chemical exposure consequences must also be addressed in fusion safety assessment. This paper provides guidance for fusion safety analysis. US Department of Energy (DOE) chemical safety assessment practices for workers and the public are reviewed. The US Environmental Protection Agency (EPA) has published some guidance on public exposure to releases of mixtures of chemicals, this guidance has been used to create an initial guideline for treating mixed radiological and toxicological releases in fusion; for example, tritiated hazardous dust from a tokamak vacuum vessel. There is no convenient means to judge the hazard severity of exposure to mixed materials. The chemical fate of mixed material constituents must be reviewed to determine if there is a separate or combined radiological and toxicological carcinogenesis, or if other health threats exist with radiological carcinogenesis. Recommendations are made for fusion facility chemical safety evaluation and safety guidance for protecting the public from chemical releases, since such levels are not specifically identified in the DOE fusion safety standard

A study for the domestic application plan of the Generic Safety Issue(GSI) for the Pressurized Heavy Water Reactor

International Nuclear Information System (INIS)

Lee, Un Chul; Jang, Jin Wook; Lee, Sang Kyung; Lee, Doo Yong; Park, Chang Hwan

2002-03-01

In this study, a base work to construct the database of the domestic and foreign GSls were done through performing the deviation of GSls for the PHWR by investigating the development trend of international joint studies and the GSls of 4 countries as the PHWR state and examined the IAEA acceptance of GSls classification for the GSls of Canada, Korea Republic of, Argentina and India. We evaluated the possibility of application of the safety Issue for PHWR by investigating causes, contents and follow-up measures of each items. To evaluate the domestic application validity of the safety issue, We made the investigation matrix for the safety issue of each countries and also are reflecting new results in investigation matrix by examining IAEA PHWR GSI development trend. We intended to derive the GSls which are most appropriate in our PHWR by examining every issues. the derived GSls are divided into the design parts and the operation parts. And they have to be solved as soon as possible

A study for the domestic application plan of the Generic Safety Issue(GSI) for the Pressurized Heavy Water Reactor

Energy Technology Data Exchange (ETDEWEB)

Lee, Un Chul; Jang, Jin Wook; Lee, Sang Kyung; Lee, Doo Yong; Park, Chang Hwan [Seoul National Univ., Seoul (Korea, Republic of)

2002-03-15

In this study, a base work to construct the database of the domestic and foreign GSls were done through performing the deviation of GSls for the PHWR by investigating the development trend of international joint studies and the GSls of 4 countries as the PHWR state and examined the IAEA acceptance of GSls classification for the GSls of Canada, Korea Republic of, Argentina and India. We evaluated the possibility of application of the safety Issue for PHWR by investigating causes, contents and follow-up measures of each items. To evaluate the domestic application validity of the safety issue, We made the investigation matrix for the safety issue of each countries and also are reflecting new results in investigation matrix by examining IAEA PHWR GSI development trend. We intended to derive the GSls which are most appropriate in our PHWR by examining every issues. the derived GSls are divided into the design parts and the operation parts. And they have to be solved as soon as possible.

The challenges for global harmonisation of food safety norms and regulations: issues for India.

Science.gov (United States)

Prakash, Jamuna

2014-08-01

Safe and adequate food is a human right, safety being a prime quality attribute without which food is unfit for consumption. Food safety regulations are framed to exercise control over all types of food produced, processed and sold so that the customer is assured that the food consumed will not cause any harm. From the Indian perspective, global harmonisation of food regulations is needed to improve food and nutrition security, the food trade and delivery of safe ready-to-eat (RTE) foods at all places and at all times. The Millennium Development Goals (MDGs) put forward to transform developing societies incorporate many food safety issues. The success of the MDGs, including that of poverty reduction, will in part depend on an effective reduction of food-borne diseases, particularly among the vulnerable group, which includes women and children. Food- and water-borne illnesses can be a serious health hazard, being responsible for high incidences of morbidity and mortality across all age groups of people. Global harmonisation of food regulations would assist in facilitating food trade within and outside India through better compliance, ensuring the safety of RTE catered foods, as well as addressing issues related to the environment. At the same time, regulations need to be optimum, as overregulation may have undue negative effects on the food trade. © 2013 Society of Chemical Industry.

Tank Vapor Characterization Project: Headspace vapor characterization of Hanford Tank 241-S-107: Results from samples collected on 06/18/96

International Nuclear Information System (INIS)

Pool, K.H.; Evans, J.C.; Thomas, B.L.

1997-01-01

This report describes the analytical results of vapor samples taken from the headspace of the waste storage tank 241-S-107 (Tank S-107) at the Hanford Site in Washington State. The results described in this report were obtained to characterize the vapors present in the tank headspace and to support safety evaluations and tank farm operations. The results include air concentrations of selected inorganic and organic analytes and grouped compounds from samples obtained by Westinghouse Hanford Company (WHC) and provided for analysis to Pacific Northwest National. Laboratory (PNNL). Analyses were performed by the Vapor Analytical Laboratory (VAL) at PNNL. Analyte concentrations were based on analytical results and, where appropriate, on sample volumes provided by WHC. A summary of the inorganic analytes, permanent gases, and total non-methane organic compounds is listed in Table S.1. Detailed descriptions of the analytical results appear in the appendices

Vapor pressures and vapor compositions in equilibrium with hypostoichiometric uranium-plutonium dioxide at high temperatures

International Nuclear Information System (INIS)

Green, D.W.; Fink, J.K.; Leibowitz, L.

1982-01-01

Vapor pressures and vapor compositions in equilibrium with a hypostoichiometric uranium-plutonium dioxide condensed phase (U/sub 1-y/Pu/sub y/)O/sub 2-x/, as functions of T, x, and y, have been calculated for 0.0 less than or equal to x less than or equal to 0.1, 0.0 less than or equal to y less than or equal to 0.3, and for the temperature range 2500 less than or equal to T less than or equal to 6000 K. The range of compositions and temperatures was limited to the region of interest to reactor safety analysis. Thermodynamic functions for the condensed phase and for each of the gaseous species were combined with an oxygen potential model to obtain partial pressures of O, O 2 , Pu, PuO, PuO 2 , U, UO, UO 2 , and UO 3 as functions of T, x, and y

A working procedure for identifying emerging food safety issues at an early stage: Implications for European and international risk management practices

NARCIS (Netherlands)

Marvin, H.J.P.; Kleter, G.A.; Frewer, L.J.; Cope, S.F.; Wentholt, M.T.A.; Rowe, G.

2009-01-01

There is a need for early identification of emerging food safety issues in order to prevent them from developing into health risks. In this paper, various existing methods and procedures which can be used for early identification of safety issues are reviewed, including the monitoring of the

Factor Analysis and Framework Development for Incorporating Public Trust on Nuclear Safety issues

Energy Technology Data Exchange (ETDEWEB)

Cho, Seongkyung; Lee, Gyebong [The Myongji Univ., Seoul (Korea, Republic of); Lee, Gihyung; Lee, Gyehwi; Jeong, Jina [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2014-05-15

The Korea Institute of Nuclear Safety (KINS), a regulatory expert organization in charge of nuclear safety in Korea, realized that a more fundamental and systematic analysis of activities is needed to actively meet the greater variety of concerns people have and increase the reliability of the results of regulation. Nuclear safety, a highly specialized field, has previously been discussed primarily from the viewpoint of the engineers who deal with the technology, but now 'public trust in nuclear safety' has to be viewed from the standpoint of the general public and from the socio-cultural perspective. Specific measures must be taken to examine which factors affect public trust and how we can secure and reproduce those factors to gain it. Also, an efficient system for incorporating public trust in nuclear safety must be established. In this study, various case studies were examined to identify the factors that affect public trust in nuclear safety. First, nuclear safety laws and information disclosure systems of major countries were examined by investigating data and conducting in-depth interviews. To explore a public framework concerning nuclear safety, big data of social media were analyzed. Also, Q methodology was used to analyze the risk schemata of the opinion leaders living in areas near nuclear power plants. Several surveys were conducted to analyze the amount of trust the public had in nuclear safety as well as their awareness of nuclear safety issues. Based on these analyses, factors affecting public trust in nuclear safety were extracted, and measures to build systems incorporating public trust in nuclear safety were proposed. This study addresses the public trust in nuclear safety on condition that the safety is ensured technically and mechanically.

Factor Analysis and Framework Development for Incorporating Public Trust on Nuclear Safety issues

International Nuclear Information System (INIS)

Cho, Seongkyung; Lee, Gyebong; Lee, Gihyung; Lee, Gyehwi; Jeong, Jina

2014-01-01

The Korea Institute of Nuclear Safety (KINS), a regulatory expert organization in charge of nuclear safety in Korea, realized that a more fundamental and systematic analysis of activities is needed to actively meet the greater variety of concerns people have and increase the reliability of the results of regulation. Nuclear safety, a highly specialized field, has previously been discussed primarily from the viewpoint of the engineers who deal with the technology, but now 'public trust in nuclear safety' has to be viewed from the standpoint of the general public and from the socio-cultural perspective. Specific measures must be taken to examine which factors affect public trust and how we can secure and reproduce those factors to gain it. Also, an efficient system for incorporating public trust in nuclear safety must be established. In this study, various case studies were examined to identify the factors that affect public trust in nuclear safety. First, nuclear safety laws and information disclosure systems of major countries were examined by investigating data and conducting in-depth interviews. To explore a public framework concerning nuclear safety, big data of social media were analyzed. Also, Q methodology was used to analyze the risk schemata of the opinion leaders living in areas near nuclear power plants. Several surveys were conducted to analyze the amount of trust the public had in nuclear safety as well as their awareness of nuclear safety issues. Based on these analyses, factors affecting public trust in nuclear safety were extracted, and measures to build systems incorporating public trust in nuclear safety were proposed. This study addresses the public trust in nuclear safety on condition that the safety is ensured technically and mechanically

The progress and issues of national nuclear and radiation safety supervision and MIS

International Nuclear Information System (INIS)

Zhou Kefei; Sun Guochen; Jiang Guang; Li Jingxi; Zhang Lin

2009-01-01

The article briefly describes the pre-planning construction of 'National Nuclear and Radiation Safety Supervision and Management Information System', Including the overall frame of the system and the main issues found in the work which affect and confine the progress of the program. Some recommendations are put forward. (authors)

Tank 241-C-109 headspace gas and vapor characterization results for samples collected in August 1994. Revision 2

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-09-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-BY-110 Headspace Gas and Vapor Characterization Results for Samples Collected in November 1994. Revision 2

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-09-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-C-105 headspace gas and vapor characterization results for samples collected in February 1994. Revision 1

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-09-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

30 CFR 71.700 - Inhalation hazards; threshold limit values for gases, dust, fumes, mists, and vapors.

Science.gov (United States)

2010-07-01

... gases, dust, fumes, mists, and vapors. 71.700 Section 71.700 Mineral Resources MINE SAFETY AND HEALTH... limit values for gases, dust, fumes, mists, and vapors. (a) No operator of an underground coal mine and... limit values adopted by the American Conference of Governmental Industrial Hygienists in “Threshold...

Hydrogen safety in nuclear power - issues and measures. Preparing 'handbook for improved hydrogen safety in nuclear power'

International Nuclear Information System (INIS)

Ogawa, Tooru; Nakajima, Kiyoshi; Hino, Ryutaro

2015-01-01

In response to hydrogen explosion at the reactor building of TEPCO Fukushima Daiichi Nuclear Power Station, the common understanding among researchers in various fields has been required for the chain of various events surrounding hydrogen in case of the accident of a light water reactor. The group composed of specialists of nuclear power and gas combustion/explosion from universities, nuclear power equipment manufacturers, business interests, and nuclear power institutes is promoting the preparation work of 'Handbook for upgrading the safety of hydrogen measures related to nuclear power,' which is scheduled to be published in the end of 2015. The main themes dealt with in the handbook are as follows; (1) severe accident management and hydrogen control, (2) hydrogen combustion phenomena to be considered, (3) behavior of air - water vapor - hydrogen system, (4) passive autocatalytic recombiner (PAR) / igniter / containment spray, and (5) water-containing waste management. This paper introduces the outline of these movements and latest achievements. (A.O.)

Dispersion of UO2F2 aerosol and HF vapor in the operating floor during winter ventilation at the Paducah Gaseous Diffusion Plant

International Nuclear Information System (INIS)

Kim, S.H.; Chen, N.C.J.; Taleyarkhan, R.P.; Keith, K.D.; Schmidt, R.W.; Carter, J.C.

1996-01-01

The gaseous diffusion process is currently employed at two plants in the US: the Paducah Gaseous Diffusion Plant and the Portsmouth Gaseous Diffusion Plant. As part of a facility-wide safety evaluation, a postulated design basis accident involving large line-rupture induced releases of uranium hexafluoride (UF 6 ) into the process building of a gaseous diffusion plant (GDP) is evaluated. When UF 6 is released into the atmosphere, it undergoes an exothermic chemical reaction with moisture (H 2 O) in the air to form vaporized hydrogen fluoride (HF) and aerosolized uranyl fluoride (UO 2 F 2 ). These reactants disperse in the process building and transport through the building ventilation system. The ventilation system draws outside air into the process building, distributes it evenly throughout the building, and discharges it to the atmosphere at an elevated temperature. Since air is recirculated from the cell floor area to the operating floor, issues concerning in-building worker safety and evacuation need to be addressed. Therefore, the objective of this study is to evaluate the transport of HF vapor and UO 2 F 2 aerosols throughout the operating floor area following B-line break accident in the cell floor area

State Legislative Developments on Campus Sexual Violence: Issues in the Context of Safety

Science.gov (United States)

Morse, Andrew; Sponsler, Brian A.; Fulton, Mary

2015-01-01

NASPA--Student Affairs Administrators in Higher Education and Education Commission of the States (ECS) have partnered to address legislative developments and offer considerations for leaders in higher education and policy on two top-level safety issues facing the higher education community: campus sexual violence and guns on campus. The first in a…

Tank Vapor Characterization Project: Headspace vapor characterization of Hanford Tank 241-TY-102: Results from samples collected on 04/12/96

International Nuclear Information System (INIS)

Evans, J.C.; Pool, K.H.; Thomas, B.L.

1997-01-01

This report describes the analytical results of vapor samples taken from the headspace of the waste storage tank 241-TY-102 (Tank TY-102) at the Hanford Site in Washington State. The results described in this report were obtained to'characterize the vapors present in the tank headspace and to support safety evaluations and tank farm operations. The results include air concentrations of selected inorganic and organic analytes, and grouped compounds from samples obtained by Westinghouse Hanford Company (WHC) and provided for analysis to Pacific Northwest National Laboratory (PNNL). Analyses were performed by the Vapor Analytical Laboratory (VAL) at PNNL. Analyte concentrations were based on analytical results and, where appropriate, sample volumes provided by WHC. A summary of the inorganic analytes, permanent gases, and total non-methane organic compounds is listed in Table S.1. The three highest concentration analytes detected in SUMMA trademark canister and triple sorbent trap samples are also listed in Table S.1. Detailed descriptions of the analytical results appear in the appendices

Tank Vapor Characterization Project: Headspace vapor characterization of Hanford Tank 241-B-105: Results from samples collected on 07/30/96

International Nuclear Information System (INIS)

Pool, K.H.; Evans, J.C.; Thomas, B.L.

1997-01-01

This report describes the analytical results of vapor samples taken from the headspace of the waste storage tank 241-B-105 (Tank B-105) at the Hanford Site in Washington State. The results described in this report were obtained to characterize the vapors present in the tank headspace and to support safety evaluations and tank farm operations. The results include air concentrations of selected inorganic and organic analytes and grouped compounds from samples obtained by Westinghouse Hanford Company (WHC) and provided for analysis to Pacific Northwest National Laboratory (PNNL). Analyses were performed by the Vapor Analytical Laboratory (VAL) at PNNL. Analyte concentrations were based on analytical results and, where appropriate, sample volumes provided by WHC. A summary of the inorganic analytes, permanent gases, and total non-methane organic compounds is listed in Table S.1. The three highest concentration analytes detected in SUMMA trademark canister and triple sorbent trap samples are also listed in Table S.1. Detailed descriptions of the analytical results appear in the appendices

Current status of environmental, health, and safety issues of lithium ion electric vehicle batteries

Energy Technology Data Exchange (ETDEWEB)

Vimmerstedt, L.J.; Ring, S.; Hammel, C.J.

1995-09-01

The lithium ion system considered in this report uses lithium intercalation compounds as both positive and negative electrodes and has an organic liquid electrolyte. Oxides of nickel, cobalt, and manganese are used in the positive electrode, and carbon is used in the negative electrode. This report presents health and safety issues, environmental issues, and shipping requirements for lithium ion electric vehicle (EV) batteries. A lithium-based electrochemical system can, in theory, achieve higher energy density than systems using other elements. The lithium ion system is less reactive and more reliable than present lithium metal systems and has possible performance advantages over some lithium solid polymer electrolyte batteries. However, the possibility of electrolyte spills could be a disadvantage of a liquid electrolyte system compared to a solid electrolyte. The lithium ion system is a developing technology, so there is some uncertainty regarding which materials will be used in an EV-sized battery. This report reviews the materials presented in the open literature within the context of health and safety issues, considering intrinsic material hazards, mitigation of material hazards, and safety testing. Some possible lithium ion battery materials are toxic, carcinogenic, or could undergo chemical reactions that produce hazardous heat or gases. Toxic materials include lithium compounds, nickel compounds, arsenic compounds, and dimethoxyethane. Carcinogenic materials include nickel compounds, arsenic compounds, and (possibly) cobalt compounds, copper, and polypropylene. Lithiated negative electrode materials could be reactive. However, because information about the exact compounds that will be used in future batteries is proprietary, ongoing research will determine which specific hazards will apply.

CANDU reactors, their regulation in Canada, and the identification of relevant NRC safety issues

International Nuclear Information System (INIS)

Charak, I.; Kier, P.H.

1995-04-01

Atomic Energy of Canada, Limited (AECL) and its subsidiary in the US, are considering submitting the CANDU 3 design for standard design certification under 10 CFR Part 52. CANDU reactors are pressurized heavy water power reactors. They have some substantially different safety responses and safety systems than the LWRs that the commercial power reactor licensing regulations of the US Nuclear Regulatory Commission (NRC) have been developed to deal with. In this report, the authors discuss the basic design characteristics of CANDU reactors, specifically of the CANDU 3 where possible, and some safety-related consequences of these characteristics. The authors also discuss the Canadian regulatory provisions, and the CANDU safety systems that have evolved to satisfy the Canadian regulatory requirements as of December 1992. Finally, the authors identify NRC regulations, mainly in 10 CFR Parts 50 and 100, with issues for CANDU 3 reactor designs. In all, eleven such regulatory issues are identified. They are: (1) the ATWS rule (section 50.62); (2) station blackout (section 50.63); (3) conformance with Standard Review Plan (SRP); (4) appropriateness of the source term (section 50.34(f) and section 100.11); (5) applicability of reactor coolant pressure boundary (RCPB) requirements (section 50.55a, etc); (6) ECCS acceptance criteria (section 50.46)(b); (7) combustible gas control (section 50.44, etc); (8) power coefficient of reactivity (GDC 11); (9) seismic design (Part 100); (10) environmental impacts of the fuel cycle (section 51.51); and (11) (standards section 50.55a)

Tank vapor characterization project. Headspace vapor characterization of Hanford waste Tank SX-101: Results from samples collected on 07/21/95

International Nuclear Information System (INIS)

Evans, J.C.; Clauss, T.W.; McVeety, B.D.; Pool, K.H.; Olsen, K.B.; Fruchter, J.S.; Silvers, K.L.

1996-05-01

Results described in this report were obtained to characterize the vapors present in the tank headspace and to support safety evaluations and tank-farm operations. They include air concentrations of inorganic and organic analytes and grouped compounds from samples. The vapor concentrations are based either on whole-volume samples or on sorbent traps exposed to sample flow. No immediate notifications were needed because analytical results indicated no specific analytes exceeded notification levels. Summary of results: NH3, 3.8 ppmv; NO2, 0.10 ppmv; NO, 0.13 ppm; H2O, 11.8 mg/L; CO2, 338 ppmv; CO, 3 ; methanol, 0.060 ppmv; acetone, 0.033 ppmv; trichlorofluoromethane, 0.023 ppmv; and acetone, 0.034 ppmv

Environmental, health and safety issues related to commercializing CuInSe{sub 2}-based photovoltaics

Energy Technology Data Exchange (ETDEWEB)

Eberspacher, C. [UNISUN, Newbury Park, CA (United States); Fthenakis, V.M.; Moskowtiz, P.D. [Brookhaven National Lab., Upton, NY (United States)

1996-07-01

Photovoltaics technology is rapidly evolving towards a new generation of low-cost thin film technologies. One of the most promising materials in this new generation is copper indium selenide (CuInSe{sub 2} or CIS). As with any new material, successful commercialization of CIS photovoltaic (PV) technology will require attention to environmental, health and safety issues, including consideration of the sources, usage, and end-of-product-life disposal and/or recycling of the constituent materials. This work focuses on three specific environmental, health and safety (EH and S) issues related to CIS PV: (1) economics are analyzed to determine their impact on materials use and re-use; (2) Federal and California State environmental disposal and waste handling regulations are analyzed to evaluate their impact on PV module manufacturing and end-of-life module handling; and (3) the logistics and economics of product recycling and waste disposal by industries with comparable EH and S issues are examined to quantify the corresponding options available for handling, disposing of and/or recycling manufacturing by-products and end-of-life modules.

Tank 241-TX-118 headspace gas and vapor characterization results for samples collected in September 1994 and December 1994

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-01-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-TY-103 headspace gas and vapor characterization results for samples collected in August 1994 and April 1995

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-09-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-TY-101 headspace gas and vapor characterization results for samples collected in August 1994 and April 1995

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-09-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-C-108 headspace gas and vapor characterization results for samples collected in July 1993 and August 1994

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-09-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-BY-107 headspace gas and vapor characterization results for samples collected in March 1994 and October 1994

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-09-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-BY-104 headspace gas and vapor characterization results for samples collected in April 1994 and June 1994

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-09-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-BY-106 headspace gas and vapor characterization results for samples collected in May 1994 and July 1994

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-09-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-C-112 headspace gas and vapor characterization results for samples collected in June 1994 and August 1994

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-09-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-BY-103 headspace gas and vapor characterization results for samples collected in May 1994 and November 1994

International Nuclear Information System (INIS)

Bratzel, D.R.

1995-01-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-C-111 headspace gas and vapor characterization results for samples collected in August 1993 and September 1994

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-09-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-BY-108 headspace gas and vapor characterization results for samples collected in March 1994 and October 1994

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-09-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Tank 241-BY-111 headspace gas and vapor characterization results for samples collected in May 1994 and November 1994

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-01-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Generic Safety Issue (GSI) 171 -- Engineered Safety Feature (ESF) failure from a loop subsequent to LOCA: Assessment of plant vulnerability and CDF contributions

International Nuclear Information System (INIS)

Martinez-Guridi, G.; Samanta, P.; Chu, L.; Yang, J.

1998-01-01

Generic Safety Issue 171 (GSI-171), Engineered Safety Feature (ESF) from a Loss Of Offsite Power (LOOP) subsequent to a Loss Of Coolant Accident (LOCA), deals with an accident sequence in which a LOCA is followed by a LOOP. This issue was later broadened to include a LOOP followed by a LOCA. Plants are designed to handle a simultaneous LOCA and LOOP. In this paper, the authors address the unique issues that are involved i LOCA with delayed LOOP (LOCA/LOOP) and LOOP with delayed LOCA (LOOP/LOCA) accident sequences. LOCA/LOOP accidents are analyzed further by developing event-tree/fault-tree models to quantify their contributions to core-damage frequency (CDF) in a pressurized water reactor and a boiling water reactor (PWR and a BWR). Engineering evaluation and judgments are used during quantification to estimate the unique conditions that arise in a LOCA/LOOP accident. The results show that the CDF contribution of such an accident can be a dominant contributor to plant risk, although BWRs are less vulnerable than PWRs

Breakout Session A: Safety Issues. Report from breakout session and discussion on safety issues

International Nuclear Information System (INIS)

Petit, Marc

2013-01-01

The first issue discussed during the breakout session on safety aspects of accident-tolerant fuels was the objective that must be assigned to the development of such concepts. The first goal should be to avoid, or at least limit, the release of radioactive materials into the environment in case of an accident. This implies that severe accidents (core melt) situations must be avoided. To reach this goal, the core geometry must remain coolable, even for accident scenarios worse than what current fuel designs are able to sustain. There was a consensus that the station blackout (SBO) is a good reference transient to evaluate the potential benefits from new, more robust, fuel designs. With respect to the present situation, the merits of new designs can be analysed with respect to three figures: - the 'grace period', i.e. the additional amount of time before the onset of core melt, during which more recovery actions can be made; - the amount of combustible gases produced; - the amount of radioactive materials released. It is important to note that those three values are not independent from one another. They may be understood as three different ways to measure the improvements arising from accident tolerant fuels. The notion of 'grace period' was discussed and it was suggested that it should be compared to the amount of time needed to switch from normal operation to accident management type of procedures. The participants agreed that the 'grace period' should be counted in hours (or even days but the realism of this last goal was questioned). In other words, there was a consensus that a 'grace period' of some minutes is pointless and definitely not worth the effort of developing and characterising the behaviour of new concepts. Although the purpose of accident-tolerant fuel development is to improve the core robustness in design basis accidents (DBA) and situations somewhat beyond like SBO, it was recognised that new concepts must

Application of coupled codes for safety analysis and licensing issues

International Nuclear Information System (INIS)

Langenbuch, S.; Velkov, K.

2006-01-01

An overview is given on the development and the advantages of coupled codes which integrate 3D neutron kinetics into thermal-hydraulic system codes. The work performed within GRS by coupling the thermal-hydraulic system code ATHLET and the 3D neutronics code QUABOX/CUBBOX is described as an example. The application of the coupled codes as best-estimate simulation tools for safety analysis is discussed. Some examples from German licensing practices are given which demonstrate how the improved analytical methods of coupled codes have contributed to solve licensing issues related to optimized and more economical use of fuel. (authors)

Worker health and safety and climate change in the Americas: issues and research needs

Directory of Open Access Journals (Sweden)

Max Kiefer

Full Text Available SYNOPSIS This report summarizes and discusses current knowledge on the impact that climate change can have on occupational safety and health (OSH, with a particular focus on the Americas. Worker safety and health issues are presented on topics related to specific stressors (e.g., temperature extremes, climate associated impacts (e.g., ice melt in the Arctic, and a health condition associated with climate change (chronic kidney disease of non-traditional etiology. The article discusses research needs, including hazards, surveillance, and risk assessment activities to better characterize and understand how OSH may be associated with climate change events. Also discussed are the actions that OSH professionals can take to ensure worker health and safety in the face of climate change.

Nuclear power and related safety issues

International Nuclear Information System (INIS)

Valdezco, Eulinia M.

2009-01-01

There are a cluster of trends that reinforce the importance of nuclear power on the world scene. Energy is the essential underpinning for economic and societal progress and, as the developing world advances, the demand for energy is growing significantly. At the same time, the carbon-intensive sources of energy on which the world has traditionally relied - in particular, coal, oil, and natural gas - pose grave threats because the growing concentrations of carbon dioxide in the atmosphere will bring about climate and ocean acidification. At the same time, rising and volatile fossil fuel prices, coupled with concerns about the security of supplies of oil and gas, enhance interest in sources of energy that do not pose the same costs and risks. As an important part of the world's response to these threats, many countries are embarking on either new or expanded nuclear power programs, more commonly referred to as a nuclear renaissance. The construction of nuclear power plants is under consideration in over thirty countries that do not currently use nuclear power. For new entrants that may have experience in constructing and operating large-scale industrial and infrastructure projects, they may not be fully familiar with the unique requirements of nuclear power and may not be fully recognize the major commitments and understandings that they must assume. Additionally, an understanding of the full range of obligations may have diminished in those countries with only one or a few reactors and where nuclear construction has not been undertaken for a long time. It is therefore in the interest of all to ensure that every country with a nuclear power program has the resources, expertise, authority and capacity to assure safety in a complete and effective manner and is committed to doing so. This presentation will outline some of the more important national infrastructure considerations including nuclear safety issues for launching a nuclear power program. An update on the

Radiological protection, safety and security issues in the industrial and medical applications of radiation sources

International Nuclear Information System (INIS)

Vaz, Pedro

2015-01-01

The use of radiation sources, namely radioactive sealed or unsealed sources and particle accelerators and beams is ubiquitous in the industrial and medical applications of ionizing radiation. Besides radiological protection of the workers, members of the public and patients in routine situations, the use of radiation sources involves several aspects associated to the mitigation of radiological or nuclear accidents and associated emergency situations. On the other hand, during the last decade security issues became burning issues due to the potential malevolent uses of radioactive sources for the perpetration of terrorist acts using RDD (Radiological Dispersal Devices), RED (Radiation Exposure Devices) or IND (Improvised Nuclear Devices). A stringent set of international legally and non-legally binding instruments, regulations, conventions and treaties regulate nowadays the use of radioactive sources. In this paper, a review of the radiological protection issues associated to the use of radiation sources in the industrial and medical applications of ionizing radiation is performed. The associated radiation safety issues and the prevention and mitigation of incidents and accidents are discussed. A comprehensive discussion of the security issues associated to the global use of radiation sources for the aforementioned applications and the inherent radiation detection requirements will be presented. Scientific, technical, legal, ethical, socio-economic issues are put forward and discussed. - Highlights: • The hazards associated to the use of radioactive sources must be taken into account. • Security issues are of paramount importance in the use of radioactive sources. • Radiation sources can be used to perpetrate terrorist acts (RDDs, INDs, REDs). • DSRS and orphan sources trigger radiological protection, safety and security concerns. • Regulatory control, from cradle to grave, of radioactive sources is mandatory.

Vapor pressure and enthalpy of vaporization of aliphatic propanediamines

International Nuclear Information System (INIS)

Verevkin, Sergey P.; Chernyak, Yury

2012-01-01

Highlights: ► We measured vapor pressure of four aliphatic 1,3-diamines. ► Vaporization enthalpies at 298 K were derived. ► We examined consistency of new and available data in the literature. ► A group-contribution method for prediction was developed. - Abstract: Vapor pressures of four aliphatic propanediamines including N-methyl-1,3-propanediamine (MPDA), N,N-dimethyl-1,3-propanediamine (DMPDA), N,N-diethyl-1,3-propanediamine (DEPDA) and N,N,N′,N′-tetramethyl-1,3-propanediamine (4MPDA) were measured using the transpiration method. The vapor pressures developed in this work and reported in the literature were used to derive molar enthalpy of vaporization values at the reference temperature 298.15 K. An internal consistency check of the enthalpy of vaporization was performed for the aliphatic propanediamines studied in this work. A group-contribution method was developed for the validation and prediction vaporization enthalpies of amines and diamines.

Report of the review of WWER-1000 safety issues resolution at Temelin nuclear power plant, Temelin, Czech Republic 11 to 15 March 1996

International Nuclear Information System (INIS)

Almeida, C.; Hoehn, J.; Seiberling, R.; Chambon, J.L.; Fil, N.S.; Munoz, A.; Roennberg, G.; Wenk, W.

1996-01-01

At the request of the Government of the Czech Republic, the IAEA conducted, in the period of 11-15 March 1996, a mission to review the resolution of WWER-1000 safety issues at Temelin NPP. These safety issues have been identified for WWER-1000 model 320 reactors and ranked according to their importance to safety in the frameworks of the IAEA Extrabudgetary Programme on Safety of WWER and RBMK Nuclear Power Plants. The Temelin NPP is a WWER-1000 and was originally designed according to standards of the former Soviet Union. After a series of reviews in the 1980s, a decision was taken by the Temelin NPP management to upgrade the design of Temelin, including the supply of fuel and instrumentation and control by a western company. The objective of the mission was to review the response of Temelin to the safety issues identified by the IAEA. The mission assessed the current Temelin design, including proposed modifications and plans for operation at Temelin, in the light of the IAEA recommendations for each relevant issue. The present report contains the mission's general conclusions and recommendations and an overview of the review performed in each topical area. The attachment contains a brief summary of the discussions on each individual safety issue and associated conclusions and recommendations. 3 refs

Tank Vapor Characterization Project: Headspace vapor characterization of Hanford Waste Tank 241-C-204: Results from samples collected on 07/02/96

International Nuclear Information System (INIS)

Thomas, B.L.; Evans, J.C.; Pool, K.H.

1997-01-01

This report describes the analytical results of vapor samples taken from the headspace of the waste storage tank 241-C-204 (Tank C-204) at the Hanford Site in Washington State. The results described in this report were obtained to characterize the vapors present in the tank headspace and to support safety evaluations and tank farm operations. The results include air concentrations of selected inorganic and organic analytes and grouped compounds from samples obtained by Westinghouse Hanford Company (WHC) and provided for analysis to Pacific Northwest National Laboratory (PNNL). Analyses were performed by the Vapor Analytical Laboratory (VAL) at PNNL. Analyte concentrations were based on analytical results and, where appropriate, sample volumes provided by WHC. A summary of the inorganic analytes, permanent gases, and total non-methane organic compounds is listed in Table S.1. The three highest concentration analytes detected in SUMMA trademark canister and triple sorbent trap samples are also listed in Table S.1. Detailed descriptions of the analytical results appear in the appendices

Tank Vapor Characterization Project: Headspace vapor characterization of Hanford Waste Tank 241-S-103: Results from samples collected on 06/12/96

International Nuclear Information System (INIS)

Evans, J.C.; Pool, K.H.; Thomas, B.L.

1997-01-01

This report describes the analytical results of vapor samples taken from the headspace of the waste storage tank 241-S-103 (Tank S-103) at the Hanford Site in Washington State. The results described in this report were obtained to characterize the vapors present in the tank headspace and to support safety evaluations and tank farm operations. The results include air concentrations of selected inorganic and organic analytes and grouped compounds from samples obtained by Westinghouse Hanford Company (WHC) and provided for analysis to Pacific Northwest National Laboratory (PNNL). Analyses were performed by the Vapor Analytical Laboratory (VAL) at PNNL. Analyte concentrations were based on analytical results and, where appropriate, sample volumes provided by WHC. A summary of the inorganic analytes, permanent gases, and total non-methane organic compounds is listed in Table S.1. The three highest concentration analytes detected in SUMMA trademark canister and triple sorbent trap samples are also listed in Table S.1. Detailed descriptions of the analytical results appear in the appendices

Cost-benefit analysis of alternative LNG vapor-mitigation measures. Topical report, September 14, 1987-January 15, 1991

International Nuclear Information System (INIS)

Atallah, S.

1992-01-01

A generalized methodology is presented for comparing the costs and safety benefits of alternative hazard mitigation measures for a large LNG vapor release. The procedure involves the quantification of the risk to the public before and after the application of LNG vapor mitigation measures. In the study, risk was defined as the product of the annual accident frequency, estimated from a fault tree analysis, and the severity of the accident. Severity was measured in terms of the number of people who may be exposed to 2.5% or higher concentration. The ratios of the annual costs of the various mitigation measures to their safety benefits (as determined by the differences between the risk before and after mitigation measure implementation), were then used to identify the most cost-effective approaches to vapor cloud mitigation

Technical findings and regulatory analysis for Generic Safety Issue II.E.4.3, ''Containment Integrity Check''

International Nuclear Information System (INIS)

Serkiz, A.W.

1988-04-01

This report contains the technical findings and regulatory analysis for Generic Safety Issue II.E.4.3, ''Containment Integrity Check.'' An evaluation of the containment isolation history from 1965 to 1983 reveals that (except for a small number of events) containment integrity has been maintained and that the majority of reported events have been events related to exceeding Technical Specification limits (or 0.6 of the allowable leakage level). In addition, more recent risk analyses have shown that allowable leakage rates even if increased by a factor of 10 would not significantly increase risk. Potential methods of continuous monitoring are identified and evaluated. Therefore, these technical findings and risk evaluations support closure of Generic Safety Issue II.E.4.3

Safety issues for LMFBR: important features drawn from the assessments of Superphenix

International Nuclear Information System (INIS)

Natta, M.

2002-01-01

Superphenix, which is built on the site of Creys-Malville, is still the biggest LMFBR plant that has been in operation. It is a pool type reactor, as Phenix and the RNR 1 500 and EFR projects. After the analysis of the preliminary safety (1974-1975), the construction was authorised by decree of the Prime Minister in 1977, the authorization for fuel loading and star-up to 3% was given by the minister of industry in July 1985 and full power was achieved in December 1986. The plant was operated until the end of December 1996, producing the equivalent of 320 EFPD, corresponding to half of the maximum barn-up of the first core. The plant was definitively stopped on the 20. of April 1998 by a decision of the French government. During this period of 25 years of licensing, construction and operation of Superphenix, others discussions and preliminary licensing procedures were started for new projects, mainly the RNR 1500 French project and the EFR European project. The operation of Superphenix was also marked by several incidents, which led to additional licensing procedures and important modifications. This period was also marked by an important work of research and development in the safety field, mostly related to the issues concerning hypothetical core disruptive accidents (HCDA) and sodium fires; further, this period was marked by the Three Mile Island accident in 1979 and the Chernobyl accident in 1986. The purpose of this paper is to present some items which were discussed during this period of 25 years and which should be of interest for future LMFBRs. In this presentation, we shall discuss the key issues concerning the safety criteria and options taken with respect to severe accidents, i.e. core melt accidents, giving details on some specific which are less known since they were assessed only lately for Superphenix, sometimes in connection with the on-going safety researches. (author)

Selective laser vaporization of polypropylene sutures and mesh

Science.gov (United States)

Burks, David; Rosenbury, Sarah B.; Kennelly, Michael J.; Fried, Nathaniel M.

2012-02-01

Complications from polypropylene mesh after surgery for female stress urinary incontinence (SUI) may require tedious surgical revision and removal of mesh materials with risk of damage to healthy adjacent tissue. This study explores selective laser vaporization of polypropylene suture/mesh materials commonly used in SUI. A compact, 7 Watt, 647-nm, red diode laser was operated with a radiant exposure of 81 J/cm2, pulse duration of 100 ms, and 1.0-mm-diameter laser spot. The 647-nm wavelength was selected because its absorption by water, hemoglobin, and other major tissue chromophores is low, while polypropylene absorption is high. Laser vaporization of ~200-μm-diameter polypropylene suture/mesh strands, in contact with fresh urinary tissue samples, ex vivo, was performed. Non-contact temperature mapping of the suture/mesh samples with a thermal camera was also conducted. Photoselective vaporization of polypropylene suture and mesh using a single laser pulse was achieved with peak temperatures of 180 and 232 °C, respectively. In control (safety) studies, direct laser irradiation of tissue alone resulted in only a 1 °C temperature increase. Selective laser vaporization of polypropylene suture/mesh materials is feasible without significant thermal damage to tissue. This technique may be useful for SUI procedures requiring surgical revision.

Key regulatory and safety issues emerging NEA activities. Lessons Learned from Fukushima Dai-ichi NPS Accident - Key Regulatory and Safety Issues

International Nuclear Information System (INIS)

Nakoski, John

2013-01-01

A presentation was provided on the key safety and regulatory issues and an update of activities undertaken by the NEA and its members in response to the accident at the Fukushima Daiichi nuclear power stations (NPS) on 11 March 2011. An overview of the accident sequence and the consequences was provided that identified the safety functions that were lost (electrical power, core cooling, and primary containment) that lead to units 1, 2, and 3 being in severe accident conditions with large off-site releases. Key areas identified for which activities of the NEA and member countries are in progress include accident management; defence-in-depth; crisis communication; initiating events; operating experience; deterministic and probabilistic assessments; regulatory infrastructure; radiological protection and public health; and decontamination and recovery. For each of these areas, a brief description of the on-going and planned NEA activities was provided within the three standing technical committees of the NEA with safety and regulatory mandates (the Committee on Nuclear Regulatory Activities - CNRA, the Committee on the Safety of Nuclear Installations - CSNI, and the Committee on Radiation Protection and Public Health - CRPPH). On-going activities of CNRA include a review of enhancement being made to the regulatory aspects for the oversight of on-site accident management strategies and processes in light of the lessons learned from the accident; providing guidance to regulators on crisis communication; and supporting the peer review of the safety assessments of risk-significant research reactor facilities in light of the accident. Within the scope of the CSNI mandate, activities are being undertaken to better understand accident progression; characteristics of new fuel designs; and a benchmarking study of fast-running software for estimating source term under severe accident conditions to support protective measure recommendations. CSNI also has ongoing work in human

RBMK nuclear power plants: Generic safety issues. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

International Nuclear Information System (INIS)

1996-05-01

This report has been prepared on the basis of above mentioned report and it is intended to provide information on RBMK NPPs generic safety issues. As all other insights, recommendations and conclusions resulting from the IAEA Programme, this report is intended to assist national decision makers, who have sole responsibility for the regulation and safe operation of their nuclear power plants. It also serves to focus national and international projects on priority of the RBMK safety improvements. 23 refs, 10 figs, 3 tabs

Level of knowledge among the population of radiation safety basic issues

Directory of Open Access Journals (Sweden)

S. A. Zelencova

2015-01-01

Full Text Available The goal of research was to determine the level of knowledge among the population on issues like sources of ionising radiation, methods of ionising radiation measurement, measures of self-protection in case of threating or actual radioactive pollution in the district, and to study self-estimation by the population of their knowledge of radiation safety issues. Research was carried out using the method of questioning of population groups in three regions close to the places of previous peaceful nuclear explosions (Arkhangelsk, Murmansk and Tyumen regions, and in five Far East regions of the Russian Federation (Kamchatka, Khabarovsk, Primorsky, Magadan and South-Sakhalin regions after radiation accident in Japan at "Fukushima-1" NPP. This research included processing of 243 questionnaires from the regions close to places of previous peaceful nuclear explosions and 216 questionnaires from the Far East regions.The analysis of obtained questioning results enabled to make the following conclusions: the level of knowledge among the population about the basic concepts of radiation safety appeared to be generally low among respondents of all eight territories. Considerable number of respondents in seven groups correctly mentioned the x-ray device as a source of ionising radiation (from 71 to 88 % of answers. In Murmansk region – only 52 % of the answers. Respondents of the same seven groups often correctly answered the question on how to detect ionising radiation (only with devices – from 68 to 98 % in different groups. The smallest number of correct answers to this question (42 % is also noted among respondents from the Murmansk region.Level of knowledge on self-protection measures at threating or actual radioactive pollution of the places of residence appeared a little higher among the Far East region population, who had actual concerns regarding the threat of radioactive pollution at the present time. However, in all eight investigated groups

Vapor pressure and enthalpy of vaporization of linear aliphatic alkanediamines

International Nuclear Information System (INIS)

Pozdeev, Vasiliy A.; Verevkin, Sergey P.

2011-01-01

Highlights: → We measured vapor pressure of diamines H 2 N-(CH 2 ) n -NH 2 with n = 3 to 12. → Vaporization enthalpies at 298 K were derived. → We examined consistency of new and available in the literature data. → Enthalpies of vaporization show linear dependence on numbers n. → Enthalpies of vaporization correlate linearly with Kovat's indices. - Abstract: Vapor pressures and the molar enthalpies of vaporization of the linear aliphatic alkanediamines H 2 N-(CH 2 ) n -NH 2 with n = (3 to 12) have been determined using the transpiration method. A linear correlation of enthalpies of vaporization (at T = 298.15 K) of the alkanediamines with the number n and with the Kovat's indices has been found, proving the internal consistency of the measured data.

Road safety in a globalised and more sustainable world: current issues and future challenges.

Science.gov (United States)

Daniels, Stijn; Risser, Ralf

2014-01-01

Although many countries have had considerable success in reducing traffic injuries over recent decades, there are still some fundamental problems in this area. At the same time, there is increasing focus on road safety research and policy development in the context of globalisation, sustainability, liveability and health. This special section presents a selection of papers that were presented at the annual ICTCT workshop held on the 8th and 9th of November 2012 in Hasselt, Belgium, and accepted for publication in Accident Analysis and Prevention following the journal's reviewing procedure. The aim of the ICTCT workshop was to analyse road safety facts, data and visions for the future in the wider context of current issues and future challenges in road safety. Copyright © 2013 Elsevier Ltd. All rights reserved.

Characterization strategy for the flammable gas safety issue

International Nuclear Information System (INIS)

Stewart, C.W.; Brewster, M.E.; Roberts, J.S.

1997-06-01

The characterization strategy for resolving the flammable gas safety issue for Hanford waste tanks is based on a structured logic diagram (SLD) that displays the outcomes necessary to reach the desired goal of making flammable gas risk acceptable. The diagram provides a structured path that can identify all information inputs, data as well as models, needed to achieve the goal. Tracing the path from need to outcome provides an immediate and clear justification and defense of a specific need. The diagram itself is a open-quote picture of a risk calculation close-quote and forms the basis for a quantitative model of risk. The SLID, with the risk calculation, identifies options for characterization, mitigation, and controls that have the maximum effect in reducing risk. It provides quantitative input to risk-based decision making so that options are chosen for maximum impact at least cost

Liquefied Gaseous Fuels Safety and Environmental Control Assessment Program: second status report

Energy Technology Data Exchange (ETDEWEB)

None

1980-10-01

Volume 2 consists of 19 reports describing technical effort performed by Government Contractors in the area of LNG Safety and Environmental Control. Report topics are: simulation of LNG vapor spread and dispersion by finite element methods; modeling of negatively buoyant vapor cloud dispersion; effect of humidity on the energy budget of a liquefied natural gas (LNG) vapor cloud; LNG fire and explosion phenomena research evaluation; modeling of laminar flames in mixtures of vaporized liquefied natural gas (LNG) and air; chemical kinetics in LNG detonations; effects of cellular structure on the behavior of gaseous detonation waves under transient conditions; computer simulation of combustion and fluid dynamics in two and three dimensions; LNG release prevention and control; the feasibility of methods and systems for reducing LNG tanker fire hazards; safety assessment of gelled LNG; and a four band differential radiometer for monitoring LNG vapors.

Portable device for generation of ultra-pure water vapor feeds

Science.gov (United States)

Velin, P.; Stenman, U.; Skoglundh, M.; Carlsson, P.-A.

2017-11-01

A portable device for the generation of co-feeds of water vapor has been designed, constructed, and evaluated for flexible use as an add-on component to laboratory chemical reactors. The vapor is formed by catalytic oxidation of hydrogen, which benefits the formation of well-controlled minute concentrations of ultra-pure water. Analysis of the effluent stream by on-line mass spectrometry and Fourier transform infrared spectroscopy confirms that water vapor can be, with high precision, generated both rapidly and steadily over extended periods in the range of 100 ppm to 3 vol. % (limited by safety considerations) using a total flow of 100 to 1500 ml/min at normal temperature and pressure. Further, the device has been used complementary to a commercial water evaporator and mixing system to span water concentrations up to 12 vol. %. Finally, an operando diffuse reflective infrared Fourier transform spectroscopic measurement of palladium catalysed methane oxidation in the absence and presence of up to 1.0 vol. % water has been carried out to demonstrate the applicability of the device for co-feeding well-controlled low concentrations of water vapor to a common type of spectroscopic experiment. The possibilities of creating isotopically labeled water vapor as well as using tracer gases for dynamic experiments are discussed.

Environmental, health, and safety issues of fuel cells in transportation. Volume 1: Phosphoric acid fuel-cell buses

Energy Technology Data Exchange (ETDEWEB)

Ring, S

1994-12-01

The U.S. Department of Energy (DOE) chartered the Phosphoric Acid Fuel-Cell (PAFC) Bus Program to demonstrate the feasibility of fuel cells in heavy-duty transportation systems. As part of this program, PAFC- powered buses are being built to meet transit industry design and performance standards. Test-bed bus-1 (TBB-1) was designed in 1993 and integrated in March 1994. TBB-2 and TBB-3 are under construction and should be integrated in early 1995. In 1987 Phase I of the program began with the development and testing of two conceptual system designs- liquid- and air-cooled systems. The liquid-cooled PAFC system was chosen to continue, through a competitive award, into Phase H, beginning in 1991. Three hybrid buses, which combine fuel-cell and battery technologies, were designed during Phase III. After completing Phase II, DOE plans a comprehensive performance testing program (Phase HI) to verify that the buses meet stringent transit industry requirements. The Phase III study will evaluate the PAFC bus and compare it to a conventional diesel bus. This NREL study assesses the environmental, health, and safety (EH&S) issues that may affect the commercialization of the PAFC bus. Because safety is a critical factor for consumer acceptance of new transportation-based technologies the study focuses on these issues. The study examines health and safety together because they are integrally related. In addition, this report briefly discusses two environmental issues that are of concern to the Environmental Protection Agency (EPA). The first issue involves a surge battery used by the PAFC bus that contains hazardous constituents. The second issue concerns the regulated air emissions produced during operation of the PAFC bus.

Public involvement in environmental, safety and health issues at the DOE Nuclear Weapons Complex

International Nuclear Information System (INIS)

Taylor, Laura L.; Morgan, Robert P.

1992-01-01

The state of public involvement in environmental, safety, and health issues at the DOE Nuclear Weapons Complex is assessed through identification of existing opportunities for public involvement and through interviews with representatives of ten local citizen groups active in these issues at weapons facilities in their communities. A framework for analyzing existing means of public involvement is developed. On the whole, opportunities for public involvement are inadequate. Provisions for public involvement are lacking in several key stages of the decision-making process. Consequently, adversarial means of public involvement have generally been more effective than cooperative means in motivating change in the Weapons Complex. Citizen advisory boards, both on the local and national level, may provide a means of improving public involvement in Weapons Complex issues. (author)

Key considerations and safety issues for the stretch power uprate at Chinshan Nuclear Power Station

Energy Technology Data Exchange (ETDEWEB)

Huang, P., E-mail: u808966@taipower.com.tw [Taiwan Power Company, Taipei, Taiwan (China)

2014-07-01

The Taiwan Power Company (TPC) has elected in recent years to implement the power uprate program as a key measure to improve the performance for TPC's nuclear power plants. The Measurement Uncertainty Recapture (MUR) power uprate for the TPC's three operating plants (reported in 16th PBNC) had been successfully implemented by July 2009. For the stretch power uprate (SPU) followed, the magnitude of uprate (~3%) is determined based on the available margins for original plant design, constant pressure approach (BWR) is adopted to simplify the evaluation, and major plant modifications are not considered. As the first application, the SPU safety analysis report (SAR) for the Chinshan plant was submitted to the ROCAEC in December 2010. A review task force was organized by the ROCAEC to perform a very thorough review. As the licensing bases are fully re-examined during the review process, many important issues have been identified and addressed. The key issues resolved include: conformance of SAR to ROCAEC's review guidance; re-examination of post-Fukushima comprehensive safety assessment; qualification of containment protective coatings; GL 96-06 (Assurance of Equipment Operability and Containment Integrity During DBA Conditions); credit for Containment Accident Pressure; issue for Annulus Pressurization Loads Evaluation. These issues required very extensive efforts to resolve. With the cooperative efforts by TPC and contractor (Institute of Nuclear Energy Research), however, all the issues were fully clarified and SAR was approved by ROCAEC on November 15, 2012. The first step SPU (2% OLTP) was successfully implemented in November 2012 at both units. (author)

Conditions of external loading of nuclear power plant structures by vapor cloud explosions and design requirements

International Nuclear Information System (INIS)

Geiger, W.

1977-01-01

In the design of nuclear power plant structures in the Federal Republic of Germany (FRG) the external loading by pressure waves from unconfined vapor cloud explosions is taken into account. The loading conditions used are based on simplified model considerations for the sequence of events which generates the pressure wave. The basic assumption is that the explosion of unconfined vapor clouds can evolve only in the form of a deflagration wave with a maximum overpressure of 0.3 bar. The research on gas explosions conducted in the FRG with a view to external reactor safety just as similar work in other countries demonstrates that there are still various problems which need further clarification. The principal issues are the maximum conceivable load and the modes of structrual response. This paper presents the main results of a status report commissioned by the German Ministry of the Inertior in which the whole sequence of events leading to the external loading of nuclear power plants and the corresponding response of the structure was scrutinized. Constitutive in establishing the status report have been thorough discussions with experts of the various fields. The following problem areas are discussed in the paper. Incidents leading to the release of large amounts of liquefied gas; Formation of explosive vapor clouds, ignition conditions; Development of the explosion, generation of the pressure wave; Interaction between pressure wave and reactor building. It is outlined where definite statements are possible and where uncertainties and information gaps exist. (Auth.)

IAEA databases on safety issues and plant status for Central and Eastern European NPPs

International Nuclear Information System (INIS)

Czibolya, L.

1995-01-01

The main principles of the database development for safety issues of WWER and RBMK reactors are described. The IAEA contribution to the G-24 Project Data Bank and an analysis of gaps and overlaps in assistance projects is given. As an example the database on WWER-440/VV-230 type reactors is shown. (HP)

Tank 241-BY-105 Headspace Gas and Vapor Characterization Results for Samples Collected in May 1994 and July 1994. Revision 2

International Nuclear Information System (INIS)

Huckaby, J.L.; Bratzel, D.R.

1995-09-01

Significant changes have been made to all of the original vapor characterization reports. This report documents specific headspace gas and vapor characterization results for all vapor sampling events to date. In addition, changes have been made to the original vapor reports to qualify the data based on quality assurance issues associated with the performing laboratories

Status and topics of thermal-hydraulic analysis for next-generation LWRs with passive safety systems

International Nuclear Information System (INIS)

Aritomi, Masanori; Ohnuki, Akira; Arai, Kenji; Kikuta, Michitaka; Yonomoto, Taisuke; Araya, Fumimasa; Akimoto, Hajime

1999-01-01

For increasing of electric power demand and reducing of carbon dioxide exhaust in the 21st century, studies of the next-generation light water reactor (LWR) with passive safety systems are developing in the world: AP-600 (by Westing House Co.); SBWR (by General Electric Co.); SWR1000 (by Siemens Co.); NP21 (by Mitsubishi Heavy Industry Co., et al.); JPSR (by JAERI). The passive equipment using natural circulation and natural convection are installed in the passive safety system, instead of active safety equipment, such as pumps, etc. It remains still as a important issue, however, to verify the reliability on the functions of the passive equipment, since that the driving forces of the passive equipment are small at comparison with the active safety equipment. The various subjects of thermal-hydraulic analysis for the next-generation light water reactors, such as temperature stratification in the passive safety systems, vapor condensation in the mixture of non-condensable gases and the interactions of the passive safety system with the primary cooling system, are illustrated and discussed in the paper. (M. Suetake)

PETRO-SAFE '94 conference papers: Book 2. Volume 5: Emergency response ampersand spill control; Volume 6: Remediation; Volume 7: Health ampersand safety issues

International Nuclear Information System (INIS)

Anon.

1994-01-01

The Fifth Annual Environmental, Safety and Health Conference and Exhibition for the oil, gas and petrochemical industries was held January 25--27, 1994 in Houston, Texas. The objective of this conference was to provide a multidisciplinary forum dealing with state-of-the-art environmental and safety issues. This volume focuses on the following: emergency response and spill control; remediation; and health and safety issues. Individual papers have been processed separately for inclusion in the appropriate data bases

VAPOR PRESSURES AND HEATS OF VAPORIZATION OF PRIMARY COAL TARS

Energy Technology Data Exchange (ETDEWEB)

Eric M. Suuberg; Vahur Oja

1997-07-01

This project had as its main focus the determination of vapor pressures of coal pyrolysis tars. It involved performing measurements of these vapor pressures and from them, developing vapor pressure correlations suitable for use in advanced pyrolysis models (those models which explicitly account for mass transport limitations). This report is divided into five main chapters. Each chapter is a relatively stand-alone section. Chapter A reviews the general nature of coal tars and gives a summary of existing vapor pressure correlations for coal tars and model compounds. Chapter B summarizes the main experimental approaches for coal tar preparation and characterization which have been used throughout the project. Chapter C is concerned with the selection of the model compounds for coal pyrolysis tars and reviews the data available to us on the vapor pressures of high boiling point aromatic compounds. This chapter also deals with the question of identifying factors that govern the vapor pressures of coal tar model materials and their mixtures. Chapter D covers the vapor pressures and heats of vaporization of primary cellulose tars. Chapter E discusses the results of the main focus of this study. In summary, this work provides improved understanding of the volatility of coal and cellulose pyrolysis tars. It has resulted in new experimentally verified vapor pressure correlations for use in pyrolysis models. Further research on this topic should aim at developing general vapor pressure correlations for all coal tars, based on their molecular weight together with certain specific chemical characteristics i.e. hydroxyl group content.

NRC program for the resolution of generic issues related to nuclear power plants. (Includes plans for the resolution of ''unresolved safety issues'' pursuant to Section 210 of the Energy Reorganization Act of 1974, as amended)

International Nuclear Information System (INIS)

1977-12-01

This report provides a description of the Nuclear Regulatory Commission's Program for the Resolution of Generic Issues Related to Nuclear Power Plants. The NRC program is of considerably broader scope than the ''Unresolved Safety Issues Plan'' required by Section 210. The NRC program does include plans for the resolution of ''Unresolved Safety Issues''; however, in addition, it includes generic tasks for the resolution of environmental issues, for the development of improvements in the reactor licensing process and for consideration of less conservative design criteria or operating limitations in areas where over conservatisms may be unnecessarily restrictive or costly

Data requirements for the Ferrocyanide Safety Issue developed through the data quality objectives process

International Nuclear Information System (INIS)

Meacham, J.E.; Cash, R.J.; Dukelow, G.T.; Babad, H.; Buck, J.W.; Anderson, C.M.; Pulsipher, B.A.; Toth, J.J.; Turner, P.J.

1994-08-01

This document records the data quality objectives (DQO) process applied to the Ferrocyanide Safety Issue at the Hanford Site. Specifically, the major recommendations and findings from this Ferrocyanide DQO process are presented. The decision logic diagrams and decision error tolerances also are provided. The document includes the DQO sample-size formulas for determining specific tank sampling requirements, and many of the justifications for decision thresholds and decision error tolerances are briefly described. More detailed descriptions are presented in other Ferrocyanide Safety Program companion documents referenced in this report. This is a living document, and the assumptions contained within will be refined as more data from sampling and characterization become available

A report by the Health and Safety Executive to the Secretary of State for Energy on a review of the generic safety issues of pressurised water reactors

International Nuclear Information System (INIS)

1979-01-01

The Nuclear Installations Inspectorate (NII) has completed a detailed technical study of certain generic safety aspects of the Pressurized Water Reactor (PWR). Although a particular design has been used as a reference, the conclusions reached are not intended to relate to any specific plant. The NII consider that there is no fundamental reason for regarding safety as an obstacle to the selection of a PWR for commercial electricity generation in Britain. Although there are some safety aspects about which present information and investigations are insufficient to allow final conclusions to be reached, and some areas where more work would lead to greater confidence, the NII are satisfied that these issues are not such as to prejudice an immediate decision in principle about the suitability of the PWR for commercial use in Britain. Further progress would appropriately form part of the more detailed review of any specific design of reactor put forward for licensing. Headings of the report include: organization of the review; the PWR; reactor safety issues; basis of judgement; the generic topics (potential plant faults and their analysis, loss of coolant, integrity of primary coolant circuit, fuel elements, reactor protection system, containment, radiological risk in normal operation, radioactive wastes); alternative PWR concepts; risk evaluation; light water reactor safety R and D; conclusions. (author)

Safety culture

International Nuclear Information System (INIS)

Keen, L.J.

2003-01-01

Safety culture has become a topic of increasing interest for industry and regulators as issues are raised on safety problems around the world. The keys to safety culture are organizational effectiveness, effective communications, organizational learning, and a culture that encourages the identification and resolution of safety issues. The necessity of a strong safety culture places an onus on all of us to continually question whether the safety measures already in place are sufficient, and are being applied. (author)

EDF ageing management program of nuclear components: a safety and economical issue

International Nuclear Information System (INIS)

Faidy, C.

2005-01-01

Ageing management of Nuclear Power Plants is an essential issue for utilities, in term of safety and availability and corresponding economical consequences. Practically all nuclear countries have developed a systematic program to deal with ageing of components on their plants. This paper presents the ageing management program developed by EDF and that are compared with different other approaches in other countries (IAEA guidelines and GALL report). The paper presents a general overview of the programs, the major results, recommendations and conclusions. (author)

Safety criteria for the future LMFBR's in France and main safety issues for the rapide 1500 project

International Nuclear Information System (INIS)

Justin, F.; Natta, M.; Orzoni, G.

1985-04-01

The main safety criteria for future LMFBR in France and the related issues for the RAPIDE 1500 project are presented and discussed. The evolutions with respect to SUPERPHENIX options and requirements are emphasized, in particular for the concerns of the prevention of core melt accidents, fuel damage limits and related required performances of the protection system, since one main option is not to consider whole core melt accidents in the containment design. One shall also point out the advantages of some mitigating features which were nevertheless added in the containment design, although without any explicit consideration for core melt accidents

Resolution of Unresolved Safety Issue A-48, ''Hydrogen control measures and effects of hydrogen burns on safety equipment''

International Nuclear Information System (INIS)

Ferrell, C.M.; Soffer, L.

1989-09-01

Unresolved Safety Issue (USI) A-48 arose as a result of the large amount of hydrogen generated and burned within containment during the Three Mile Island accident. This issue covers hydrogen control measures for recoverable degraded-core accidents for all boiling-water reactors (BWRs) and those pressurized-water reactors (PWRs) with ice-condenser containments. The Commission and the nuclear industry have sponsored extensive research in this area, which has led to significant revision of the Commission's hydrogen control regulations, given in Title 10, Code of Federal Regulations, Part 50 (10 CFR 50), Section 50.44. BWRs having Mark I and II containments are presently required to operate with inerted containment atmospheres that effectively prevent hydrogen combustion. BWRs with Mark III containments and PWRs with ice-condenser containments are now required to be equipped with hydrogen control systems to protect containment integrity and safety systems inside containment. Industry has chosen to use hydrogen igniter systems to burn hydrogen produced in a controlled fashion to prevent damage. An independent review by a Committee of the National Research Council concluded that, for most accident scenarios, current regulatory requirements make it highly unlikely that hydrogen detonation would be the cause of containment failure. On the basis of the extensive research effort conducted and current regulatory requirements, including their implementation, the staff concludes that no new regulatory guidance on hydrogen control for recoverable degraded-core accidents for these types of plants is necessary and that USI A-48 is resolved

Environmental Assessment: Waste Tank Safety Program, Hanford Site, Richland, Washington

International Nuclear Information System (INIS)

1994-02-01

The US Department of Energy (DOE) needs to take action in the near-term, to accelerate resolution of waste tank safety issues at the Hanford Site near the City of Richland, Washington, and reduce the risks associated with operations and management of the waste tanks. The DOE has conducted nuclear waste management operations at the Hanford Site for nearly 50 years. Operations have included storage of high-level nuclear waste in 177 underground storage tanks (UST), both in single-shell tank (SST) and double-shell tank configurations. Many of the tanks, and the equipment needed to operate them, are deteriorated. Sixty-seven SSTs are presumed to have leaked a total approximately 3,800,000 liters (1 million gallons) of radioactive waste to the soil. Safety issues associated with the waste have been identified, and include (1) flammable gas generation and episodic release; (2) ferrocyanide-containing wastes; (3) a floating organic solvent layer in Tank 241-C-103; (4) nuclear criticality; (5) toxic vapors; (6) infrastructure upgrades; and (7) interim stabilization of SSTs. Initial actions have been taken in all of these areas; however, much work remains before a full understanding of the tank waste behavior is achieved. The DOE needs to accelerate the resolution of tank safety concerns to reduce the risk of an unanticipated radioactive or chemical release to the environment, while continuing to manage the wastes safely

Enthalpy of Vaporization and Vapor Pressures: An Inexpensive Apparatus

Science.gov (United States)

Battino, Rubin; Dolson, David A.; Hall, Michael A.; Letcher, Trevor M.

2007-01-01

A simple and inexpensive method to determine the enthalpy of vaporization of liquids by measuring vapor pressure as a function of temperature is described. The vapor pressures measured with the stopcock cell were higher than the literature values and those measured with the sidearm rubber septum cell were both higher and lower than literature…

Current safety issues in the development of geological disposal of radioactive waste in France

International Nuclear Information System (INIS)

Raimbault, P.

2002-01-01

Deep geological disposal of high level and medium level long-lived waste in France is one of the three research paths defined by the law of 30th December 1991 on radioactive waste management. Research should be undertaken on: separation and transmutation of long-lived radionuclides in these waste; reversible or non reversible disposal in deep geological layers supported by investigations in underground laboratories; processes for conditioning and long term surface storage of these waste. In 2006, a global evaluation report on this research should be established by the Government and sent to the French Parliament. On this basis the Parliament should promulgate a law providing new objectives for the research and possibly presenting a framework for a deep disposal process. The French Nuclear Safety Authority has the responsibility to license the underground laboratories foreseen in the second research path and the nuclear facilities involved in the first and third research paths and make sure that existing high level and medium level long-lived waste currently produced are properly managed. It will give its advice on the safety aspects associated to the envisaged future management options. Its main concern is that results obtained in 2006 will be conclusive enough to take decisions for future orientations. Concerning the deep disposal option, under the responsibility of ANDRA (Agence Nationale pour la gestion des Dechets RAdioactifs), the construction of an underground laboratory has been authorized on the Bure site, in eastern France, and the shafts are under construction. The main issue is the level of investigations that may be performed in the host rock in order to support the feasibility study of a disposal concept on this site. Other issues are the elaboration of new safety standards to set a framework for a safety assessment of a disposal concept, the specifications for acceptance of waste packages in a future deep disposal, and relation of safety matters with

Vapor pressures and vaporization enthalpy of codlemone by correlation gas chromatography

International Nuclear Information System (INIS)

Schultz, Shannon M.; Harris, Harold H.; Chickos, James S.

2015-01-01

Highlights: • The vaporization enthalpy of codlemone has been evaluated. • The vapor pressure of codlemone has been evaluated from T = (298.15 to T b ) K. • Vapor pressures for the 1-alkanols standards are available from T = (298.15 to 500) K. - Abstract: The vapor pressure and vaporization enthalpy of codlemone (trans, trans 8,10-dodecadien-1-ol), the female sex hormone of the codling moth is evaluated by correlation gas chromatography using a series of saturated primary alcohols as standards. A vaporization enthalpy of (92.3 ± 2.6) kJ · mol −1 and a vapor pressure, p/Pa = (0.083 ± 0.012) were evaluated at T = 298.15 K. An equation for the evaluation of vapor pressure from ambient temperature to boiling has been derived by correlation for codlemone. The calculated boiling temperature of T B = 389 K at p = 267 Pa is within the temperature range reported in the literature. A normal boiling temperature of T B = (549.1 ± 0.1) K is also estimated by extrapolation

Dual vapor extraction on acidic sludge tar at a former refinery

International Nuclear Information System (INIS)

Lear, P.R.; Beall, P.; Townsend, S.

1996-01-01

OHM Remediation Services Corp conducted a pilot-scale demonstration for a novel application of dual vapor extraction technology for the pretreatment of the acid tar sludge material. The acid tar sludge comprised of approximately 60% asphaltene hydrocarbon material, 20% clay, and up to 20% sulfuric acid (H 2 SO 4 ). The liquid layer in the bottom of the pits has a low pH ( 2 ) gas which is released with the sludge material is excavated or handled. The objective of the dual vapor extraction was to remove the SO 2 vapors and liquid layer containing sulfuric acid prior to any further treatment. The dual vapor extraction would reduce the amount of alkaline reagent required for neutralization while eliminating the health and safety concerns. Overall, the DVE pilot demonstration successfully showed that both liquids and vapors could be removed from the acid tar sludge material. The liquid present in the lower portions of the pits will have pH values of 1.0 or less and acidities on the order of 5% H 2 SO 4 . The liquid removed from the acid tar sludge material by a DVE system will have slightly higher pH (∼1.5) and lower alkalinities (∼3% H 2 SO 4 ). The SO 2 concentration in the vapors removed by the DVE system will be variable with initial levels approaching 1,200 ppmv SO 2 . The SO 2 concentration in the vapor phase should decrease with time. A caustic scrubber solution will remove any SO 2 from the vapor phase. After DVE treatment, the acid tar sludge material would have a slightly increased pH and a decreased SO 2 concentration

IAEA Issues Report on Mission to Review Japan's Nuclear Power Plant Safety Assessment Process

International Nuclear Information System (INIS)

2012-01-01

Full text: A team of international nuclear safety experts has delivered its report on a mission it conducted from 21-31 January 2012 to review Japan's process for assessing nuclear safety at the nation's nuclear power plants. International Atomic Energy Agency (IAEA) officials delivered the IAEA Mission Report to Japanese officials yesterday and made it publicly available today. Following the 11 March 2011 accident at TEPCO's Fukushima Daiichi Nuclear Power Station, Japan's Nuclear and Industrial Safety Agency (NISA) announced the development of a revised safety assessment process for the nation's nuclear power reactors. At the request of the Government of Japan, the IAEA organized a team of five IAEA and three international nuclear safety experts and visited Japan to review NISA's approach to the Comprehensive Assessments for the Safety of Existing Power Reactor Facilities and how NISA examines the results submitted by nuclear operators. A Preliminary Summary Report was issued on 31 January. 'The mission report provides additional information regarding the team's recommendations and overall finding that NISA's instructions to power plants and its review process for the Comprehensive Safety Assessments are generally consistent with IAEA Safety Standards', said team leader James Lyons, Director of the IAEA's Nuclear Installation Safety Division. National safety assessments and their peer review by the IAEA are a key component of the IAEA Action Plan on Nuclear Safety, which was approved by the Agency's Member States following last year's nuclear accident at Fukushima Daiichi Nuclear Power Station. The IAEA safety review mission held meetings in Tokyo with officials from NISA, the Japanese Nuclear Energy Safety Organization (JNES), and the Kansai Electric Power Company (KEPCO), and the team visited the Ohi Nuclear Power Station to see an example of how Japan's Comprehensive Safety Assessment is being implemented by nuclear operators. In its report delivered today

A summary of the low upper shelf toughness safety margin issue

International Nuclear Information System (INIS)

Merkle, J.G.

1991-01-01

The low upper shelf toughness issue has a long history, beginning with the choice of materials for the submerged arc welding process, but also potentially involving the use of A302-B plate. Criteria for vessels containing low upper shelf materials have usually been expressed in terms of the Charpy upper shelf impact energy. Although these criteria have had several different bases, the range of limiting values for wall thicknesses approaching 229 mm (9 in.) has remained between 54 to 68J (40 to 50 ft lbs). Allowable values for vessels with thinner walls and/or only circumferential low upper shelf welds might conceivably be less. A decision on criteria to be incorporated into the ASME Code is now being made. Choices to be made concern the method for estimating the decrease in upper shelf impact energy, flaw geometry for circumferential welds, statistical significance of toughness values, the choice between J D and J M , reference pressure, safety factors and the inclusion of tearing stability calculations by means of R curve extrapolation. NRC research programs have contributed significantly to the resolution of the low upper shelf issue. These programs embrace all aspects of the issue, including material characterization, large scale testing, analysis and criteria development. 52 refs., 5 figs

How to bring issues of health and safety closer to young workers during their work training

Directory of Open Access Journals (Sweden)

Helena Mesarič

2016-06-01

Full Text Available The data collected by the European Community indicates that the young, economically active population, aged from 18 to 24 years, is more likely to suffer from occupational injuries and occupational diseases in comparison with the rest of the working population, due to the lack of experience and knowledge about health and safety in the workplace, and insufficient training for safe and healthy work practices. Employers must establish an adequate system to ensure workplace health and safety, with an emphasis on providing safety training for pupils and students undergoing apprenticeship and the newly-employed young people. The Ministry of Labour, Family, Social Affairs and Equal Opportunities runs a series of projects aiming to promote health and safety culture among young people in Slovenia. The goal of the national programme for introducing occupational health and safety into the education process is offering a variety of tools and devices for educators and teachers, which can be employed to introduce the issues of occupational health and safety to young people in an exciting and engaging manner.

Common issues found in operating safety peer review of nuclear power plants

International Nuclear Information System (INIS)

Wu Meijing; Zhang Fengping

2004-01-01

The 3rd stage of the safety culture promotion in a Nuclear Power Plant (NPP) is characterized by establishing learning organization and continuous self-improvement. Peer Review was used as an effective tool by a lot of NPPs to improve the overall management and performance. This Paper provided the WANO Peer Review Methodology, the common issues found, the recommendation or suggestions to correct the area for improvement. It may be beneficial to other NPP which planning to have Peer Review or Self Evaluation. (authors)

The use of laser diodes for control of uranium vaporization rates

International Nuclear Information System (INIS)

Hagans, K.; Galkowski, J.

1993-09-01

Within the Atomic Vapor Laser Isotope Separation (AVLIS) program we have successfully used the laser absorption spectroscopy technique (LAS) to diagnose process physics performance and control vaporization rate. In the LAS technique, a narrow line-width laser is tuned to an absorption line of the species to be measured. The laser light that is propagated through the sample is and, from this data, the density of the species can be calculated. These laser systems have exclusively consisted of expensive, cumbersome, and difficult to maintain argon-ion-pumped ring dye lasers. While the wavelength flexibility of dye lasers is very useful in a laboratory environment, these laser systems are not well suited for the industrial process control system under development for an AVLIS plant. Diode-lasers offer lower system costs, reduced man power requirements, reduced space requirements, higher system availability, and improved operator safety. We report the. successful deployment and test of a prototype laser diode based uranium vapor rate control system. Diode-laser generated LAS data was used to control the uranium vaporization rate in a hands-off mode for greater than 50 hours. With one minor adjustment the system successfully controlled the vaporization rate for greater than 147 hours. We report excellent agreement with ring dye laser diagnostics and uranium weigh-back measurements

Influence of external factors on safety. Topical issues paper no. 2

International Nuclear Information System (INIS)

Packer, C.; Talbot, K.

2001-01-01

In recent years a number of worldwide trends have emerged which affect the operating environment of nuclear power plants (NPPs), both externally in the sense of their political and economic business climate, and internally in the sense of their budgets, staffing levels and business practices. It is very clear that the 'span', or breadth, of issues being faced by the owners, operators and regulators of NPPs today, and the speed at which these issues are changing, is much greater than ever before. Included for consideration are: plants under construction or plants for which previously halted construction was resumed; plants operating in a deregulated electricity market; plants being refurbished and restarted; plants undergoing life extension programmes; plants facing closure for political reasons; plants being laid up or decommissioned; plants experiencing changes in ownership or operating control even by non-nuclear organizations; plants which need substantial design and material condition upgrades; plants facing a significant decline in revenue or funding; plants learning new management techniques; plants engaged in new regimes of safety regulation; plants with serious shortages of human experience and talent; plants facing ageing issues (institutional, personnel and equipment). What is particularly new is that many of these activities are now often going on simultaneously within a single utility. This means that the management attention span may be substantially stretched. In the USA, in particular, many of these issues have been present for several years. They began before economic deregulation of the electricity industry and their frequency and significance have generally increased in recent years as a result of deregulation. It is of paramount importance that co-operation and learning be promoted extensively as the industry faces these multiple overlapping and potentially distracting challenges. The basic principles of safety management that have been

Summary of tank information relating salt well pumping to flammable gas safety issues

International Nuclear Information System (INIS)

Caley, S.M.; Mahoney, L.A.; Gauglitz, P.A.

1996-09-01

The Hanford Site has 149 single-shell tanks (SSTs) containing radioactive wastes that are complex mixes of radioactive and chemical products. Active use of these SSTs was phased out completely by November 1980, and the first step toward final disposal of the waste in the SSTs is interim stabilization, which involves removing essentially all of the drainable liquid from the tank. Stabilization can be achieved administratively, by jet pumping to remove drainable interstitial liquid, or by supernatant pumping. To date, 116 tanks have been declared interim stabilized; 44 SSTs have had drainable liquid removed by salt well jet pumping. Of the 149 SSTs, 19 are on the Flammable Gas Watch List (FGWL) because the waste in these tanks is known or suspected, in all but one case, to generate and retain mixtures of flammable gases, including; hydrogen, nitrous oxide, and ammonia. Salt well pumping to remove the drainable interstitial liquid from these SSTs is expected to cause the release of much of the retained gas, posing a number of safety concerns. The scope of this work is to collect and summarize information, primarily tank data and observations, that relate salt well pumping to flammable gas safety issues. While the waste within FGWL SSTs is suspected offering flammable gases, the effect of salt well pumping on the waste behavior is not well understood. This study is being conducted for the Westinghouse Hanford Company as part of the Flammable Gas Project at the Pacific Northwest National Laboratory (PNNL). Understanding the historical tank behavior during and following salt well pumping will help to resolve the associated safety issues

Package leaflets of the most consumed medicines in Portugal: safety and regulatory compliance issues. A descriptive study

Directory of Open Access Journals (Sweden)

Carla Pires

Full Text Available CONTEXT AND OBJECTIVES: Package leaflets are necessary for safe use of medicines. The aims of the present study were: 1 to assess the compliance between the content of the package leaflets and the specifications of the pharmaceutical regulations; and 2 to identify potential safety issues for patients. DESIGN AND SETTING: Qualitative descriptive study, involving all the package leaflets of branded medicines from the three most consumed therapeutic groups in Portugal, analyzed in the Department of Pharmacoepidemiology, School of Pharmacy, University of Lisbon. METHODS: A checklist validated through an expert consensus process was used to gather the data. The content of each package leaflet in the sample was classified as compliant or non-compliant with compulsory regulatory issues (i.e. stated dosage and descriptions of adverse reactions and optional regulatory issues (i.e. adverse reaction frequency, symptoms and procedures in cases of overdose. RESULTS: A total of 651 package leaflets were identified. Overall, the package leaflets were found to be compliant with the compulsory regulatory issues. However, the optional regulatory issues were only addressed in around half of the sample of package leaflets, which made it possible to identify some situations of potentially compromised drug safety. CONCLUSION: Ideally, the methodologies for package leaflet approval should be reviewed and optimized as a way of ensuring the inclusion of the minimum essential information for safe use of medicines.

The issue of safety in the transports of radioactive materials

International Nuclear Information System (INIS)

Pallier, Lucien

1961-01-01

This report addresses and discusses the various hazards associated with transports of radioactive materials, their prevention, intervention measures, and precautions to be taken by rescuers, notably how these issues are addressed in regulations. For each of these issues, this report proposes guidelines, good practices, or procedures to handle the situation. The author first addresses hazards related to a transport of radioactive products: multiplicity of hazards, different hazards due to radioactivity, hazards due to transport modes, scale of dangerous doses. The second part addresses precautionary measures: for road transports, for air transports, for maritime transports, control procedures. The third part addresses the intervention in case of accident: case of a road accident with an unhurt or not vehicle crew, role of the first official rescuers, other kinds of accidents. The fourth part briefly addresses the case of transport of fissile materials. The fifth part discusses the implications of safety measures. Appendices indicate standards, and give guidelines for the construction of a storage building for radioactive products, for the control and storage of parcels containing radioactive products, and for the establishment of instructions for the first aid personnel

Petroleum Vapor Intrusion

Science.gov (United States)

One type of vapor intrusion is PVI, in which vapors from petroleum hydrocarbons such as gasoline, diesel, or jet fuel enter a building. Intrusion of contaminant vapors into indoor spaces is of concern.

Detonation and fragmentation modeling for the description of large scale vapor explosions

International Nuclear Information System (INIS)

Buerger, M.; Carachalios, C.; Unger, H.

1985-01-01

The thermal detonation modeling of large-scale vapor explosions is shown to be indispensable for realistic safety evaluations. A steady-state as well as transient detonation model have been developed including detailed descriptions of the dynamics as well as the fragmentation processes inside a detonation wave. Strong restrictions for large-scale vapor explosions are obtained from this modeling and they indicate that the reactor pressure vessel would even withstand explosions with unrealistically high masses of corium involved. The modeling is supported by comparisons with a detonation experiment and - concerning its key part - hydronamic fragmentation experiments. (orig.) [de

Using network screening methods to determine locations with specific safety issues: A design consistency case study.

Science.gov (United States)

Butsick, Andrew J; Wood, Jonathan S; Jovanis, Paul P

2017-09-01

The Highway Safety Manual provides multiple methods that can be used to identify sites with promise (SWiPs) for safety improvement. However, most of these methods cannot be used to identify sites with specific problems. Furthermore, given that infrastructure funding is often specified for use related to specific problems/programs, a method for identifying SWiPs related to those programs would be very useful. This research establishes a method for Identifying SWiPs with specific issues. This is accomplished using two safety performance functions (SPFs). This method is applied to identifying SWiPs with geometric design consistency issues. Mixed effects negative binomial regression was used to develop two SPFs using 5 years of crash data and over 8754km of two-lane rural roadway. The first SPF contained typical roadway elements while the second contained additional geometric design consistency parameters. After empirical Bayes adjustments, sites with promise (SWiPs) were identified. The disparity between SWiPs identified by the two SPFs was evident; 40 unique sites were identified by each model out of the top 220 segments. By comparing sites across the two models, candidate road segments can be identified where a lack design consistency may be contributing to an increase in expected crashes. Practitioners can use this method to more effectively identify roadway segments suffering from reduced safety performance due to geometric design inconsistency, with detailed engineering studies of identified sites required to confirm the initial assessment. Copyright © 2017 Elsevier Ltd. All rights reserved.

Safety of fuel cycle facilities. Topical issues paper no. 3

International Nuclear Information System (INIS)

Ranguelova, V.; Niehaus, F.; Delattre, D.

2001-01-01

that the relative hazards vary from facility to facility depending upon the processes employed. However, all installations should be designed and operated so as to keep all sources of radiation exposure under strict technical and administrative control. The design management should ensure that the structures, systems and components important to safety have the appropriate characteristics, specifications and material composition to perform the required safety functions. Emphasis should be placed on the use of proven engineered safety features in the implementation of the defence in depth concept in the facility design and operation. The development of nuclear safety standards is one of the tasks given by the Statute of the IAEA. Over a number of years, the IAEA has developed a comprehensive set of publications which address, in a structured manner, the safety of nuclear installations. The Safety Fundamentals publication entitled 'The Safety of Nuclear Installations' presents an international consensus on the basic concepts underlying the principles for the regulation, design and operation of nuclear installations, including fuel cycle facilities. Detailed requirements and guides for activities relating to siting, design, construction, operation, decommissioning and regulation of nuclear installations are addressed by lower hierarchy safety standards, which cover nuclear power plants (NPPs) and research reactors. Although some of the IAEA NPP standards can be adapted and applied to fuel cycle facilities and some standards on criticality safety are published by the International Organization for Standardization (ISO), in general there is a lack of international safety standards to cover the safety of such facilities. With a view to establishing a plan for the development of safety standards for fuel cycle facilities, the IAEA began to compile information on the status of national regulations and safety issues concerning such facilities. It also held a Technical Committee

EDF view on next generation reactor safety and operability issues

International Nuclear Information System (INIS)

Serviere, G.

2002-01-01

In the foreseeable future, EDF will have to compete in an economically de-regulated market. Nuclear currently accounts for more than 80% of the electricity generated by the company, and generation costs are quite competitive compared to that of other competing energies. It is so likely that nuclear units will remain the backbone of EDF generating fleet in the years to come. However, to remain a viable option for electricity generation in the longer term, nuclear will have to maintain both its cost-effectiveness and a very high safety level. This could seem quite straightforward considering the current situation where safety records are at an all time high and Operating and Maintenance costs are under tight control. In fact, it could be a real challenge. Competing fossil technologies progress and there is a concurrent trend to try and improve the performance of future nuclear units. However, in most cases, proposed designs depart from the well-known Light Water Reactor (LWR) technology. They are either new concepts or designs already tested in the past and modified to address some of their perceived drawbacks. Contrary to the prevailing situation where short-term alternatives like the EPR, the ABWR or the AP600 largely build upon experience gathered on operating units, most designs contemplated for implementation beyond 2020 or 2030 cannot be considered proven. Considering the above mentioned uncertainties, EDF have confirmed their preference for proven designs with higher outputs, such as the EPR. However, it would appear unreasonable to consider that new designs are doomed to fail: they could well turn out to be adequate for specific niches in a de-regulated market and provide reasonable alternatives for the utility. Nevertheless, for such an alternative to be considered, additional evidence is needed that utility preferences are reflected in the design, and that all potential technical issues have been identified, adequately addressed and resolved. Currently, EDF

Regulatory analysis for the resolution of Unresolved Safety Issue A-44, Station Blackout. Draft report

International Nuclear Information System (INIS)

Rubin, A.M.

1986-01-01

''Station Blackout'' is the complete loss of alternating current (ac) electric power to the essential and nonessential buses in a nuclear power plant; it results when both offsite power and the onsite emergency ac power systems are unavailable. Because many safety systems required for reactor core decay heat removal and containment heat removal depend on ac power, the consequences of a station blackout could be severe. Because of the concern about the frequency of loss of offsite power, the number of failures of emergency diesel generators, and the potentially severe consequences of a loss of all ac power, ''Station Blackout'' was designated as Unresolved Safety Issue (USI) A-44. This report presents the regulatory analysis for USI A-44. It includes: (1) a summary of the issue, (2) the proposed technical resolution, (3) alternative resolutions considered by the Nuclear Regulatory Commission (NRC) staff, (4) an assessment of the benefits and costs of the recommended resolution, (5) the decision rationale, and (6) the relationship between USI A-44 and other NRC programs and requirements

Microwave assisted chemical vapor infiltration

International Nuclear Information System (INIS)

Devlin, D.J.; Currier, R.P.; Barbero, R.S.; Espinoza, B.F.; Elliott, N.

1991-01-01

A microwave assisted process for production of continuous fiber reinforced ceramic matrix composites is described. A simple apparatus combining a chemical vapor infiltration reactor with a conventional 700 W multimode oven is described. Microwave induced inverted thermal gradients are exploited with the ultimate goal of reducing processing times on complex shapes. Thermal gradients in stacks of SiC (Nicalon) cloths have been measured using optical thermometry. Initial results on the ''inside out'' deposition of SiC via decomposition of methyltrichlorosilane in hydrogen are presented. Several key processing issues are identified and discussed. 5 refs

Experimental study of the spill and vaporization of a volatile liquid

International Nuclear Information System (INIS)

Bohl, Douglas; Jackson, Gregory

2007-01-01

Pool and vapor cloud characteristics of an acetone spill issuing from the downstream wall of a flow obstruction oriented perpendicular to a uniform flow were investigated experimentally. Data indicate that the spill event was largely governed by the temperature of the surface in relation to the boiling point of the spilled liquid. The free stream velocity (ranging from 0.75 to 3.0 m/s) also impacted the spreading of the spill. Planar laser-induced fluorescence (PLIF) was used to measure acetone vapor concentrations during the transient pool spreading and vaporization in a window 60 cm long by 50 cm high and located downstream of the 16 cm high obstruction. The recirculation region induced by the flow obstruction caused upstream transport of the acetone vapor along the spill surface, after which it was convected vertically along the obstruction wall before being entrained into the flow and convected downstream. The recirculating flow caused regions of vapor within the flammability limits to be localized near the flow obstruction. These regions moved into and out of the measurement plane by large three-dimensional flow structures. The flammable region of the evolved vapor cloud was observed to grow well past the downstream edge of the measurement domain. With decreasing wind speeds, both the mass of acetone vapor within the flammability limits and the total spill event time increased significantly. The data presented herein provides a basis for validating future spill models of hazardous chemical releases, where complex turbulent flow modeling must be coupled with spill spreading and vaporization dynamics

Engineering approach to relative quantitative assessment of safety culture and related social issues in NPP operation

International Nuclear Information System (INIS)

Sivokon, V.; Gladyshev, M.; Malkin, S.

2005-01-01

The report is devoted to presentation of engineering approach and software tool developed for Safety Culture (SC) assessment as well as to the results of their implementation at Smolensk NPP. The engineering approach is logic evolution of the IAEA ASSET method broadly used at European NPPs in 90-s. It was implemented at Russian and other plants including Olkiluoto NPP in Finland. The approach allows relative quantitative assessing and trending the aspects of SC by the analysis of evens features and causes, calculation and trending corresponding indicators. At the same time plant's operational performances and related social issues, including efficiency of plant operation and personnel reliability, can be monitored. With the help of developed tool the joint team combined from personnel of Smolensk NPP and RRC 'Kurchatov Institute' ('KI') issued the SC self-assessment report, which identifies: families of recurrent events, main safety and operational problems ; their trends and importance to SC and plant efficiency; recommendations to enhance SC and operational performance

Tank Vapor Characterization Project: Annual status report for FY 1996

International Nuclear Information System (INIS)

Silvers, K.L.; Fruchter, J.S.; Huckaby, J.L.; Almeida, T.L.; Evans, J.C. Jr.; Pool, K.H.; Simonen, C.A.; Thornton, B.M.

1997-01-01

In Fiscal Year 1996, staff at the Vapor Analytical Laboratory at Pacific Northwest National Laboratory performed work in support of characterizing the vapor composition of the headspaces of radioactive waste tanks at the Hanford Site. Work performed included support for technical issues and sampling methodologies, upgrades for analytical equipment, analytical method development, preparation of unexposed samples, analyses of tank headspaces samples, preparation of data reports, and operation of the tank vapor database. Progress made in FY 1996 included completion and issuance of 50 analytical data reports. A sampling system comparison study was initiated and completed during the fiscal year. The comparison study involved the vapor sampling system (VSS), a truck-based system, and the in situ vapor sampling system (ISVS), a cart-based system. Samples collected during the study were characterized for inorganic, permanent gases, total non-methane organic compounds and organic speciation by SUMMA trademark and TST methods. The study showed comparable sampling results between the systems resulting in the program switching from the VSS to the less expensive ISVS methodology in late May 1996. A temporal study was initiated in January 1996 in order to understand the influences seasonal temperatures changes have on the vapors in the headspace of Hanford waste tanks. A holding time study was initiated in the fourth quarter of FY 1996. Samples were collected from tank S-102 and rushed to the laboratory for time zero analysis. Additional samples will be analyzed at 1, 2, 4, 8, 16, and 32 weeks

Radiation Protection, Safety and Security Issues in Ghana

International Nuclear Information System (INIS)

Boadu, M. B.; Emi-Reynolds, G.; Amoako, J. K.; Hasford, F.; Akrobortu, E.

2015-01-01

The Radiation Protection Board was established in 1993 by PNDC Law 308 as the National Competent Authority for the regulation of radiation sources and radioactive materials in Ghana. The mandate and responsibilities of RPB are prescribed in the legislative instrument, LI 1559 issued in 1993. The operational functions of the Board are carried out by the Radiation Protection Institute, which was established to provide technical support for the enforcement of the legislative instrument. The regulatory activities include among others: – Issuance permits for the import/export of any radiation producing device and radioactive materials into/out of the country. It therefore certifies the radioactivity levels in food and the environmental samples. – Authorization and Inspection of practices using radiation sources and radioactive materials in Ghana. – Undertakes safety assessment services and enforcement actions on practices using radiation sources and radioactive materials in line with regulations. – Provides guidance and technical support in fulfilling regulatory requirement to users of radiation producing devices and radioactive materials nationwide by monitoring of monthly radiation absorbed doses for personnel working at radiation facilities. – Provides support to the management of practices in respect of nuclear and radioactive waste programme. – Calibrates radiation emitting equipment and nuclear instrumentation to ensure the safety of patients, workers and the general public. – Establish guidelines for the mounting (non-ionizing) communication masts. – Environmental monitoring (non-ionizing) programmes for communication masts. With the establishment of the national competent authority, facilities using radioactive sources and radiation emitting devices have been brought under regulatory control. Effective regulatory control of radiation emitting devices are achieved through established legal framework, independent Regulatory Authority supported by

Characterization strategy report for the criticality safety issue

International Nuclear Information System (INIS)

Doherty, A.L.; Doctor, P.G.; Felmy, A.R.; Prichard, A.W.; Serne, R.J.

1997-06-01

High-level radioactive waste from nuclear fuels processing is stored in underground waste storage tanks located in the tank farms on the Hanford Site. Waste in tank storage contains low concentrations of fissile isotopes, primarily U-235 and Pu-239. The composition and the distribution of the waste components within the storage environment is highly complex and not subject to easy investigation. An important safety concern is the preclusion of a self-sustaining neutron chain reaction, also known as a nuclear criticality. A thorough technical evaluation of processes, phenomena, and conditions is required to make sure that subcriticality will be ensured for both current and future tank operations. Subcriticality limits must be based on considerations of tank processes and take into account all chemical and geometrical phenomena that are occurring in the tanks. The important chemical and physical phenomena are those capable of influencing the mixing of fissile material and neutron absorbers such that the degree of subcriticality could be adversely impacted. This report describes a logical approach to resolving the criticality safety issues in the Hanford waste tanks. The approach uses a structured logic diagram (SLD) to identify the characterization needed to quantify risk. The scope of this section of the report is limited to those branches of logic needed to quantify the risk associated with a criticality event occurring. The process is linked to a conceptual model that depicts key modes of failure which are linked to the SLD. Data that are needed include adequate knowledge of the chemical and geometric form of the materials of interest. This information is used to determine how much energy the waste would release in the various domains of the tank, the toxicity of the region associated with a criticality event, and the probability of the initiating criticality event

NS [Nuclear Safety] update. Current safety and security activities and developments taking place in the Department of Nuclear Safety and Security. Issue no. 4, June 2007

International Nuclear Information System (INIS)

2007-04-01

This newsletter contains information on the Centre for Advanced Safety Assessment Tools (CASAT), the new strategy for the recovery of radioactive sources, the Technical Support Organization Conference and a message form the Director of the Division of Nuclear Installation Safety. To improve the efficiency of safety assessment methods, ensure transparency in their validation and application and establish an excellent knowledge base and training programmes, the IAEA's Centre for Advanced Safety Assessment Tools (CASAT) has therefore been formed. The Centre addresses the need for continuous technical support mechanisms for safety assessment methods. It provides support to Member States to enhance their safety assessment capabilities for present and future generations of nuclear systems, with a special focus on countries with a developing nuclear technology and nuclear safety infrastructure. It serves as a consolidated repository of relevant safety analysis knowledge, provides for focused training including advanced analytical simulations, and supports collaboration on safety assessment projects among Member States. The resources provided through CASAT include codes, models, databases, verification and validation information, analytical procedures and guides. The main purpose of the recently established Radioactive Source Technical Coordination Group (RSTCG) is to facilitate the technical coordination of activities of the IAEA related to the control and management of radioactive sources through the development of common approaches in technical matters and to advise the management of the relevant Divisions. It is the task of the RSTCG to provide the programme managers of the participating divisions/sections with a common opinion/advice on technical issues related to the control and management of radioactive sources. The RSTCG members obtain, inter alia from programme managers, information on all relevant project proposals, and share relevant materials in due time to