safety training section: Topics by WorldWideScience.org

Sample records for safety training section

All aboard the Safety Train(ing)!

CERN Multimedia

Rosaria Marraffino

2015-01-01

Would you like to influence CERN’s safety courses? Do you want to help build better training courses? If your answer is yes to one or both of these questions: now is the time! The Safety Training section is looking for volunteers from the whole CERN community to test new courses before they go online for all members of the personnel. The Safety Training section is redesigning the CERN e-learning package in order to adopt a more educational approach and to make the courses a more enjoyable experience. The section is now calling for volunteers. “We know we can do much more with testers’ help and feedback,” explains Christoph Balle, Safety Training section leader. “By having the end users actively involved in the process, we’ll achieve our goal of communicating safety in the best possible way. As the volunteers will play an active role in the development of the courses, they will be providing a service to the whole community.&am...
28 CFR 345.83 - Job safety training.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Job safety training. 345.83 Section 345... INDUSTRIES (FPI) INMATE WORK PROGRAMS FPI Inmate Training and Scholarship Programs § 345.83 Job safety training. FPI provides inmates with regular job safety training which is developed and scheduled in...
29 CFR 1926.21 - Safety training and education.

Science.gov (United States)

2010-07-01

... 29 Labor 8 2010-07-01 2010-07-01 false Safety training and education. 1926.21 Section 1926.21... Provisions § 1926.21 Safety training and education. (a) General requirements. The Secretary shall, pursuant to section 107(f) of the Act, establish and supervise programs for the education and training of...
Recruitment, qualification and training of personnel for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2005-01-01

The objective of this Safety Guide is to outline the various factors that should to be considered in order to ensure that the operating organization has a sufficient number of qualified personnel for safe operation of a nuclear power plant. In particular, the objective of this publication is to provide general recommendations on the recruitment and selection of plant personnel and on the training and qualification practices that have been adopted in the nuclear industry since the predecessor Safety Guide was published in 1991. In addition, this Safety Guide seeks to establish a framework for ensuring that all managers and staff employed at a nuclear power plant demonstrate their commitment to the management of safety to high professional standards. This Safety Guide deals specifically with those aspects of qualification and training that are important to the safe operation of nuclear power plants. It provides recommendations on the recruitment, selection, qualification, training and authorization of plant personnel. That is, of all personnel in all safety related functions and at all levels of the plant. Some parts or all of this Safety Guide may also be used, with due adaptation, as a guide to the recruitment, selection, training and qualification of staff for other nuclear installations (such as research reactors or nuclear fuel cycle facilities). Section 2 gives guidance on the recruitment and selection of suitable personnel for a nuclear power plant. Section 3 gives guidance on the establishment of personnel qualification, explains the relationship between qualification and competence, and identifies how competence may be developed through education, experience and training. Section 4 deals with general aspects of the training policy for nuclear power plant personnel: the systematic approach, training settings and methods, initial and continuing training, and the keeping of training records. Section 5 provides guidance on the main aspects of training programmes
Recruitment, qualification and training of personnel for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2002-01-01

The objective of this Safety Guide is to outline the various factors that should to be considered in order to ensure that the operating organization has a sufficient number of qualified personnel for safe operation of a nuclear power plant. In particular, the objective of this publication is to provide general recommendations on the recruitment and selection of plant personnel and on the training and qualification practices that have been adopted in the nuclear industry since the predecessor Safety Guide was published in 1991. In addition, this Safety Guide seeks to establish a framework for ensuring that all managers and staff employed at a nuclear power plant demonstrate their commitment to the management of safety to high professional standards. This Safety Guide deals specifically with those aspects of qualification and training that are important to the safe operation of nuclear power plants. It provides recommendations on the recruitment, selection, qualification, training and authorization of plant personnel; that is, of all personnel in all safety related functions and at all levels of the plant. Some parts or all of this Safety Guide may also be used, with due adaptation, as a guide to the recruitment, selection, training and qualification of staff for other nuclear installations (such as research reactors or nuclear fuel cycle facilities). Section 2 gives guidance on the recruitment and selection of suitable personnel for a nuclear power plant. Section 3 gives guidance on the establishment of personnel qualification, explains the relationship between qualification and competence, and identifies how competence may be developed through education, experience and training. Section 4 deals with general aspects of the training policy for nuclear power plant personnel: the systematic approach, training settings and methods, initial and continuing training, and the keeping of training records. Section 5 provides guidance on the main aspects of training programmes
Teen worker safety training: methods used, lessons taught, and time spent.

Science.gov (United States)

Zierold, Kristina M

2015-05-01

Safety training is strongly endorsed as one way to prevent teens from performing dangerous tasks at work. The objective of this mixed methods study was to characterize the safety training that teenagers receive on the job. From 2010 through 2012, focus groups and a cross-sectional survey were conducted with working teens. The top methods of safety training reported were safety videos (42 percent) and safety lectures (25 percent). The top lessons reported by teens were "how to do my job" and "ways to spot hazards." Males, who were more likely to do dangerous tasks, received less safety training than females. Although most teens are getting safety training, it is inadequate. Lessons addressing safety behaviors are missing, training methods used are minimal, and the time spent is insignificant. More research is needed to understand what training methods and lessons should be used, and the appropriate safety training length for effectively preventing injury in working teens. In addition, more research evaluating the impact of high-quality safety training compared to poor safety training is needed to determine the best training programs for teens. © The Author(s) 2015 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.
Safety training for working youth: Methods used versus methods wanted.

Science.gov (United States)

Zierold, Kristina M

2016-04-07

Safety training is promoted as a tool to prevent workplace injury; however, little is known about the safety training experiences young workers get on-the-job. Furthermore, nothing is known about what methods they think would be the most helpful for learning about safe work practices. To compare safety training methods teens get on the job to those safety training methods teens think would be the best for learning workplace safety, focusing on age differences. A cross-sectional survey was administered to students in two large high schools in spring 2011. Seventy percent of working youth received safety training. The top training methods that youth reported getting at work were safety videos (42%), safety lectures (25%), and safety posters/signs (22%). In comparison to the safety training methods used, the top methods youth wanted included videos (54%), hands-on (47%), and on-the-job demonstrations (34%). This study demonstrated that there were differences in training methods that youth wanted by age; with older youth seemingly wanting more independent methods of training and younger teens wanting more involvement. Results indicate that youth want methods of safety training that are different from what they are getting on the job. The differences in methods wanted by age may aid in developing training programs appropriate for the developmental level of working youth.
Radiation safety training for accelerator facilities

International Nuclear Information System (INIS)

Trinoskey, P.A.

1997-02-01

In November 1992, a working group was formed within the U.S. Department of Energy's (DOE's) accelerator facilities to develop a generic safety training program to meet the basic requirements for individuals working in accelerator facilities. This training, by necessity, includes sections for inserting facility-specific information. The resulting course materials were issued by DOE as a handbook under its technical standards in 1996. Because experimenters may be at a facility for only a short time and often at odd times during the day, the working group felt that computer-based training would be useful. To that end, Lawrence Livermore National Laboratory (LLNL) and Argonne National Laboratory (ANL) together have developed a computer-based safety training program for accelerator facilities. This interactive course not only enables trainees to receive facility- specific information, but time the training to their schedule and tailor it to their level of expertise
Transportation safety training

International Nuclear Information System (INIS)

Jones, E.

1990-01-01

Over the past 25 years extensive federal legislation involving the handling and transport of hazardous materials/waste has been passed that has resulted in numerous overlapping regulations administered and enforced by different federal agencies. The handling and transport of hazardous materials/waste involves a significant number of workers who are subject to a varying degree of risk should an accident occur during handling or transport. Effective transportation training can help workers address these risks and mitigate them, and at the same time enable ORNL to comply with the federal regulations concerning the transport of hazardous materials/waste. This presentation will outline how the Environmental and Health Protection Division's Technical Resources and Training Section at the Oak Ridge National Laboratory, working with transportation and waste disposal personnel, have developed and implemented a comprehensive transportation safety training program to meet the needs of our workers while satisfying appropriate federal regulations. 8 refs., 3 tabs
A survey of radiation safety training among South African interventionalists

Directory of Open Access Journals (Sweden)

A Rose

2018-04-01

Full Text Available Background. Ionising radiation is increasingly being used in modern medicine for diagnostic, interventional and therapeutic purposes. There has been an improvement in technology, resulting in lower doses being emitted. However, an increase in the number of procedures has led to a greater cumulative dose for patients and operators, which places them at increased risk of the effects of ionising radiation. Radiation safety training is key to optimising medical practice.Objective. To present the perceptions of South African interventionalists on the radiation safety training they received and to offer insights into the importance of developing and promoting such training programmes for all interventionalists.Methods. In this cross-sectional study, we collected data from interventionalists (N=108 using a structured questionnaire.Results. All groups indicated that radiation exposure in the workplace is important (97.2%. Of the participants, the radiologists received the most training (65.7%. Some participants (44.1% thought that their radiation safety training was adequate. Most participants (95.4% indicated that radiation safety should be part of their training curriculum. Few (34.3% had received instruction on radiation safety when they commenced work. Only 62% had been trained on how to protect patients from ionising radiation exposure.Conclusion. Radiation safety training should be formalised in the curriculum of interventionalistsâ€™ training programmes, as this will assist in stimulating a culture of radiation protection, which in turn will improve patient safety and improve quality of care.
Use of a Web Site to Enhance Criticality Safety Training

International Nuclear Information System (INIS)

Huang, S T; Morman, J

2003-01-01

Currently, a website dedicated to enhancing communication and dissemination of criticality safety information is sponsored by the U.S. Department of Energy (DOE) Nuclear Criticality Safety Program (NCSP). This website was developed as part of the DOE response to the Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 97-2, which reflected the need to make criticality safety information available to a wide audience. The website is the focal point for DOE nuclear criticality safety (NCS) activities, resources and references, including hyperlinks to other sites actively involved in the collection and dissemination of criticality safety information. The website is maintained by the Lawrence Livermore National Laboratory (LLNL) under auspices of the NCSP management. One area of the website contains a series of Nuclear Criticality Safety Engineer Training (NCSET) modules. During the past few years, many users worldwide have accessed the NCSET section of the NCSP website and have downloaded the training modules as an aid for their training programs. This trend was remarkable in that it points out a continuing need of the criticality safety community across the globe. It has long been recognized that training of criticality safety professionals is a continuing process involving both knowledge-based training and experience-based operations floor training. As more of the experienced criticality safety professionals reach retirement age, the opportunities for mentoring programs are reduced. It is essential that some method be provided to assist the training of young criticality safety professionals to replenish this limited human expert resource to support on-going and future nuclear operations. The main objective of this paper is to present the features of the NCSP website, including its mission, contents, and most importantly its use for the dissemination of training modules to the criticality safety community. We will discuss lessons learned and several ideas
Effective safety training program design

International Nuclear Information System (INIS)

Chilton, D.A.; Lombardo, G.J.; Pater, R.F.

1991-01-01

Changes in the oil industry require new strategies to reduce costs and retain valuable employees. Training is a potentially powerful tool for changing the culture of an organization, resulting in improved safety awareness, lower-risk behaviors and ultimately, statistical improvements. Too often, safety training falters, especially when applied to pervasive, long-standing problems. Stepping, Handling and Lifting injuries (SHL) more commonly known as back injuries and slips, trips and falls have plagued mankind throughout the ages. They are also a major problem throughout the petroleum industry. Although not as widely publicized as other immediately-fatal accidents, injuries from stepping, materials handling, and lifting are among the leading causes of employee suffering, lost time and diminished productivity throughout the industry. Traditional approaches have not turned the tide of these widespread injuries. a systematic safety training program, developed by Anadrill Schlumberger with the input of new training technology, has the potential to simultaneously reduce costs, preserve employee safety, and increase morale. This paper: reviews the components of an example safety training program, and illustrates how a systematic approach to safety training can make a positive impact on Stepping, Handling and Lifting injuries
Safety Training Parks – Cooperative Contribution to Safety and Health Trainings

DEFF Research Database (Denmark)

Reiman, Arto; Pedersen, Louise Møller; Väyrynen, Seppo

2017-01-01

. The concept of Safety Training Park (STP) has been developed to meet these challenges. Eighty stakeholders from the Finnish construction industry have been involved in the construction and financing of the STP in northern Finland (STPNF). This unique cooperation has contributed to the immediate success......, and evidence from the literature are presented with a focus on the pros and cons of the STPNF. The STP is a new and innovative method for safety training that stimulates different learning styles and inspires changes in individuals’ behavior and in the organizations’ safety climate. The stakeholders’ high...... commitment, a long-term perspective, and a strong safety climate are identified as preconditions for the STP concept to work....
Safety training priorities

Science.gov (United States)

Thompson, N. A.; Ruck, H. W.

1984-04-01

The Air Force is interested in identifying potentially hazardous tasks and prevention of accidents. This effort proposes four methods for determining safety training priorities for job tasks in three enlisted specialties. These methods can be used to design training aimed at avoiding loss of people, time, materials, and money associated with on-the-job accidents. Job tasks performed by airmen were measured using task and job factor ratings. Combining accident reports and job inventories, subject-matter experts identified tasks associated with accidents over a 3-year period. Applying correlational, multiple regression, and cost-benefit analysis, four methods were developed for ordering hazardous tasks to determine safety training priorities.
Training the Masses ? Web-based Laser Safety Training at LLNL

Energy Technology Data Exchange (ETDEWEB)

Sprague, D D

2004-12-17

The LLNL work smart standard requires us to provide ongoing laser safety training for a large number of persons on a three-year cycle. In order to meet the standard, it was necessary to find a cost and performance effective method to perform this training. This paper discusses the scope of the training problem, specific LLNL training needs, various training methods used at LLNL, the advantages and disadvantages of these methods and the rationale for selecting web-based laser safety training. The tools and costs involved in developing web-based training courses are also discussed, in addition to conclusions drawn from our training operating experience. The ILSC lecture presentation contains a short demonstration of the LLNL web-based laser safety-training course.
Implementation of the INEEL safety analyst training standard

International Nuclear Information System (INIS)

Hochhalter, E. E.

2000-01-01

The Idaho Nuclear Technology and Engineering Center (INTEC) safety analysis units at the Idaho National Engineering and Environmental Laboratory (INEEL) are in the process of implementing the recently issued INEEL Safety Analyst Training Standard (STD-1107). Safety analyst training and qualifications are integral to the development and maintenance of core safety analysis capabilities. The INEEL Safety Analyst Training Standard (STD-1107) was developed directly from EFCOG Training Subgroup draft safety analyst training plan template, but has been adapted to the needs and requirements of the INEEL safety analysis community. The implementation of this Safety Analyst Training Standard is part of the Integrated Safety Management System (ISMS) Phase II Implementation currently underway at the INEEL. The objective of this paper is to discuss (1) the INEEL Safety Analyst Training Standard, (2) the development of the safety analyst individual training plans, (3) the implementation issues encountered during this initial phase of implementation, (4) the solutions developed, and (5) the implementation activities remaining to be completed
How many employees receive safety training during their first year of a new job?

Science.gov (United States)

Smith, Peter M; Mustard, Cameron A

2007-02-01

To describe the provision of safety training to Canadian employees, specifically those in their first year of employment with a new employer. Three repeated national Canadian cross-sectional surveys. 59 159 respondents from Statistics Canada's Workplace and Employee Surveys (1999, 2001 and 2003), 5671 who were in their first year of employment. Receiving occupational health and safety training, orientation training or office or non-office equipment training in either a classroom or on-the-job in the previous 12 months. Only 12% of women and 16% of men reported receiving safety training in the previous 12 months. Employees in their first 12 months of employment were more likely to receive safety training than employees with >5 years of job tenure. However, still only one in five new employees had received any safety training while with their current employer. In a fully adjusted regression model, employees who had access to family and support programs, women in medium-sized workplaces and in manufacturing, and men in large workplaces and in part-time employment all had an increased probability of receiving safety training. No increased likelihood of safety training was found in younger workers or those in jobs with higher physical demands, both of which are associated with increased injury risk. From our results, it would appear that only one in five Canadian employees in their first year of a new job received safety training. Further, the provision of safety training does not appear to be more prevalent among workers or in occupations with increased risk of injuries.
Surgical Safety Training of World Health Organization Initiatives.

Science.gov (United States)

Davis, Christopher R; Bates, Anthony S; Toll, Edward C; Cole, Matthew; Smith, Frank C T; Stark, Michael

2014-01-01

Undergraduate training in surgical safety is essential to maximize patient safety. This national review quantified undergraduate surgical safety training. Training of 2 international safety initiatives was quantified: (1) World Health Organization (WHO) "Guidelines for Safe Surgery" and (2) Department of Health (DoH) "Principles of the Productive Operating Theatre." Also, 13 additional safety skills were quantified. Data were analyzed using Mann-Whitney U tests. In all, 23 universities entered the study (71.9% response). Safety skills from WHO and DoH documents were formally taught in 4 UK medical schools (17.4%). Individual components of the documents were taught more frequently (47.6%). Half (50.9%) of the additional safety skills identified were taught. Surgical societies supplemented safety training, although the total amount of training provided was less than that in university curricula (P < .0001). Surgical safety training is inadequate in UK medical schools. To protect patients and maximize safety, a national undergraduate safety curriculum is recommended. © 2013 by the American College of Medical Quality.
Attitudes of teenagers towards workplace safety training.

Science.gov (United States)

Zierold, Kristina M; Welsh, Erin C; McGeeney, Teresa J

2012-12-01

More than 70 % of teenagers are employed before graduating high school. Every 10 min, in the United States, a young worker is injured on the job. Safety training has been suggested as a way to prevent injuries, yet little is known about the methods of safety training and the effectiveness of training that teens receive at work. This study is the first to assess the attitudes teens hold towards safety training and what they believe would help them stay safe on the job. In 2010, focus groups and interviews were conducted with 42 teens from public high schools in Jefferson County, Kentucky. Participating teens were aged 15-19 years old, 43 % male, 69 % African-American, and 56 % worked either in the restaurant/food industry or in retail jobs. Most teens reported receiving safety training. Although the majority believed that safety training was important, many felt that they personally did not need safety training; that it was "common sense." However, 52 % of teens reported workplace injuries. Many viewed injury lightly and as part of the job, even those that sustained severe injuries. Most teens were trained by methods that seem at best "boring" and at worst, ineffective. Little interaction, action, or repetition is used. Training is not geared towards teens' developmental levels or interest, as in most cases all workers received the same type of training. Safety training may be a powerful way to reduce injury rates among working teenagers, but it is essential that training methods which are geared towards teens are utilized.
Nuclear safety education and training network

International Nuclear Information System (INIS)

Bastos, J.; Ulfkjaer, L.

2004-01-01

In March 2001, the Secretariat convened an Advisory Group on Education and Training in nuclear safety. The Advisory Group considered structure, scope and means related to the implementation of an IAEA Programme on Education and Training . A strategic plan was agreed and the following outputs were envisaged: 1. A Training Support Programme in nuclear safety, including a standardized and harmonized approach for training developed by the IAEA and in use by Member States. 2. National and regional training centres, established to support sustainable national nuclear safety infrastructures. 3. Training material for use by lecturers and students developed by the IAEA in English and translated to other languages. The implementation of the plan was initiated in 2002 emphasizing the preparation of training materials. In 2003 a pilot project for a network on Education and Training in Asia was initiated

Restaurant supervisor safety training: evaluating a small business training intervention.

Science.gov (United States)

Bush, Diane; Paleo, Lyn; Baker, Robin; Dewey, Robin; Toktogonova, Nurgul; Cornelio, Deogracia

2009-01-01

We developed and assessed a program designed to help small business owners/managers conduct short training sessions with their employees, involve employees in identifying and addressing workplace hazards, and make workplace changes (including physical and work practice changes) to improve workplace safety. During 2006, in partnership with a major workers' compensation insurance carrier and a restaurant trade association, university-based trainers conducted workshops for more than 200 restaurant and food service owners/managers. Workshop participants completed posttests to assess their knowledge, attitudes, and intentions to implement health and safety changes. On-site follow-up interviews with 10 participants were conducted three to six months after the training to assess the extent to which program components were used and worksite changes were made. Post-training assessments demonstrated that attendees increased their understanding and commitment to health and safety, and felt prepared to provide health and safety training to their employees. Follow-up interviews indicated that participants incorporated core program concepts into their training and supervision practices. Participants conducted training, discussed workplace hazards and solutions with employees, and made changes in the workplace and work practices to improve workers' health and safety. This program demonstrated that owners of small businesses can adopt a philosophy of employee involvement in their health and safety programs if provided with simple, easy-to-use materials and a training demonstration. Attending a workshop where they can interact with other owners/ managers of small restaurants was also a key to the program's success.
Pulsed power safety and technical training at Sandia National Laboratories

International Nuclear Information System (INIS)

Goldstein, S.A.; Zawadzkas, G.A.; Donovan, G.L.; Mikkelson, K.A.; Sharpe, A.W.; Johnston, R.R.

1987-01-01

The expansion of pulsed power applications research at Sandia National Labs requires increasing technician-level support from individuals trained in high voltage, short pulse technology. Large superpower generators need a broad-based training curriculum in all aspects of accelerator operation to satisfy recent Department of Energy (DOE) desires for formal certification of accelerator operators. This paper discusses the status of Sandia's safety and technical training program in pulsed power technology directed mainly towards high school graduate and technical school level students. Present safety training methodology requires that hazards for experimental facilities are identified first, a specific curriculum is then tailored to individuals' background experiences and hazards involved with their current assignments. In the technical training program, certification requirements are being established and a coursework program has been initiated in which subjects are organized into two sections. The first covers electrical principles and physical properties of pulsed power components. The second presents various support-type subsystems for accelerators
How many employees receive safety training during their first year of a new job?

Science.gov (United States)

Smith, Peter M; Mustard, Cameron A

2007-01-01

Objective To describe the provision of safety training to Canadian employees, specifically those in their first year of employment with a new employer. Design Three repeated national Canadian cross‐sectional surveys. Subjects 59 159 respondents from Statistics Canada's Workplace and Employee Surveys (1999, 2001 and 2003), 5671 who were in their first year of employment. Main outcome Receiving occupational health and safety training, orientation training or office or non‐office equipment training in either a classroom or on‐the‐job in the previous 12 months. Results Only 12% of women and 16% of men reported receiving safety training in the previous 12 months. Employees in their first 12 months of employment were more likely to receive safety training than employees with >5 years of job tenure. However, still only one in five new employees had received any safety training while with their current employer. In a fully adjusted regression model, employees who had access to family and support programs, women in medium‐sized workplaces and in manufacturing, and men in large workplaces and in part‐time employment all had an increased probability of receiving safety training. No increased likelihood of safety training was found in younger workers or those in jobs with higher physical demands, both of which are associated with increased injury risk. Conclusions From our results, it would appear that only one in five Canadian employees in their first year of a new job received safety training. Further, the provision of safety training does not appear to be more prevalent among workers or in occupations with increased risk of injuries. PMID:17296687
Reactor safety training for decision making

International Nuclear Information System (INIS)

Scott, C.K.

2003-01-01

The purpose of this paper is to describe an approach to reactor safety training for technical staff working at an operating station. The concept being developed is that, when the engineer becomes a registered professional engineer, they have sufficient reactor safety knowledge to perform independent technical work without compromising the safety of the plant. This goal would be achieved with a focused training program while working as an engineer-in-training (four years in NB). (author)
Safety Training: a right or an obligation?

CERN Multimedia

HSE Unit

2014-01-01

CERN’s Safety Training programme currently offers around 50 classroom courses and 17 e-learning courses. Although anyone can attend any of these courses, some are compulsory for everyone working at CERN. In particular, “CERN Safety Introduction” and “Safety during LS1” are compulsory for all new arrivals. The "Self-Rescue Mask" training course. Photo: Christoph Balle. However, depending on the type of activities, the type of workstation, the role you have been assigned (TSO, project leader, etc.) and/or the area where you will be working (e.g. confined spaces), you might be required to follow additional safety training provided by CERN. In accordance with the provisions of the CERN Safety Policy, members of the personnel must keep themselves informed of their obligations in terms of safety training and of the actions they must take to keep up to date. Most training courses are valid for three years, and as they reach the ...
Safety Training: Basic Safety and Access Courses

CERN Multimedia

Antonella Vignes

2005-01-01

Objective The purpose of the basic safety courses is to increase awareness for everyone working on the CERN site (CERN staff, associates, outside companies, students and apprentices) of the various existing on-site hazards, and how to recognize and avoid them. Safety course changes The current organization for basic safety courses is changing. There will be two main modifications: the organization of the courses and the implementation of a specific new training course for the LHC machine during the LHC tests and hardware commissioning phase. Organizational changes This concerns the existing basic safety training, currently called level1, level2 and level3. Under the new procedure, a video will be projected in registration building 55 and will run every day at 14.00 and 15.00 in English. The duration of the video will be 50 minutes. The course contents will be the same as the slides currently used, plus a video showing real situations. With this new organization, attendees will systematically follow the...
Safety Training: basic safety and access courses

CERN Multimedia

2005-01-01

Objective The purpose of the basic safety courses is to increase awareness for everyone working on the CERN site (CERN staff, associates, outside companies, students and apprentices) of the various hazards existing on site, and how to recognise and avoid them. Safety course changes The current organisation of basic safety courses is changing. There will be two main modifications: the organisation of the courses and the implementation of a specific new training course for the LHC machine during the LHC tests and hardware commissioning phase. Organisational changes This concerns the existing basic safety training, currently called level 1, level 2 and level 3. Under the new procedure, a video will be projected in registration building 55 and will run every day at 14.00 and 15.00 in English. The duration of the video will be 50 minutes. The course contents will be the same as the slides currently used, plus a video showing real situations. With this new organization, participants will systematically follow...
Nuclear criticality safety training: guidelines for DOE contractors

International Nuclear Information System (INIS)

Crowell, M.R.

1983-09-01

The DOE Order 5480.1A, Chapter V, Safety of Nuclear Facilities, establishes safety procedures and requirements for DOE nuclear facilities. This guide has been developed as an aid to implementing the Chapter V requirements pertaining to nuclear criticality safety training. The guide outlines relevant conceptual knowledge and demonstrated good practices in job performance. It addresses training program operations requirements in the areas of employee evaluations, employee training records, training program evaluations, and training program records. It also suggests appropriate feedback mechanisms for criticality safety training program improvement. The emphasis is on academic rather than hands-on training. This allows a decoupling of these guidelines from specific facilities. It would be unrealistic to dictate a universal program of training because of the wide variation of operations, levels of experience, and work environments among DOE contractors and facilities. Hence, these guidelines do not address the actual implementation of a nuclear criticality safety training program, but rather they outline the general characteristics that should be included
Safety Training: places available in October 2014

CERN Multimedia

2014-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. Safety Training, HSE Unit safety-training@cern.ch Title of the course EN Title of the course FR Date Hours Language Chemical Safety ATEX Habilitation - Level 2 Habilitation ATEX - Niveau 2 16-Oct-14 to 17-Oct-14 9:00 - 17:30 French Cryogenic Safety Cryogenic Safety - Fundamentals Sécurité Cryogénie - Fondamentaux 23-Oct-14 10:00 - 12:00 English Cryogenic Safety - Helium Transfer Sécurité Cryogénie - Transfert d'hélium 30-Oct-14 9:30 - 12:00 English Electrical Safety Habilitation Electrique - Electrician Low Voltage - Initial Habilitation électrique - Électricien basse tension - Initial 02-Oct-14 to 06-Oct-14 9:00 - 17:30 English 20-Oct-14 to 22-Oct-14 9:00 -...
Safety, training focus of combined organization

Energy Technology Data Exchange (ETDEWEB)

Toop, L.

2006-03-15

This article presented details of Enform, a company that coordinates safety programs and training for new employees in the oil and gas industry. Enform was created when the Petroleum Industry Training Services merged with the Canadian Petroleum Safety Council. The aim of Enform is to ensure continuous improvements in health and safety within the industry by reducing working injuries and promoting health and safety practices. The companies merged to eliminate duplication of services and allow associates further opportunities for advanced training. In 2005, Enform trained an estimated 155,000 students, and a number of new courses were introduced and updated. A franchise program was extended and a training council was formed to offer direction and guidance to the oil industry. Enform focuses on sharing information among companies, as well as working to harmonize safety regulations across provincial borders. A task force was recently created by the company with a specific focus on drug and alcohol abuse. Other concerns include driver safety and driver interactions with wildlife. Enform is mainly focused on the traditional oil industry, and has had little entry into the oil sands industry. It was concluded that increased activity in the oil and gas industry will remain Enform's biggest challenge in the next few years. Plans for Enform's increased involvement in the offshore oil and gas industry were also discussed. 4 figs.
Nuclear safety training program (NSTP) for dismantling

International Nuclear Information System (INIS)

Cretskens, Pieter; Lenie, Koen; Mulier, Guido

2014-01-01

European Control Services (GDF Suez) has developed and is still developing specific training programs for the dismantling and decontamination of nuclear installations. The main topic in these programs is nuclear safety culture. We therefore do not focus on technical training but on developing the right human behavior to work in a 'safety culture' environment. The vision and techniques behind these programs have already been tested in different environments: for example the dismantling of the BN MOX Plant in Dessel (Belgium), Nuclear Safety Culture Training for Electrabel NPP Doel..., but also in the non-nuclear industry. The expertise to do so was found in combining the know-how of the Training and the Nuclear Department of ECS. In training, ECS is one of the main providers of education in risky tasks, like elevation and manipulation of charges, working in confined spaces... but it does also develop training on demand to improve safety in a certain topic. Radiation Protection is the core business in the Nuclear Department with a presence on most of the nuclear sites in Belgium. Combining these two domains in a nuclear safety training program, NSTP, is an important stage in a dismantling project due to specific contamination, technical and other risks. It increases the level of safety and leads to a harmonization of different working cultures. The modular training program makes it possible to evaluate constantly as well as in group or individually. (authors)
Nuclear criticality safety department training implementation

International Nuclear Information System (INIS)

Carroll, K.J.; Taylor, R.G.; Worley, C.A.

1996-01-01

The Nuclear Criticality Safety Department (NCSD) is committed to developing and maintaining a staff of qualified personnel to meet the current and anticipated needs in Nuclear Criticality Safety (NCS) at the Oak Ridge Y-12 Plant. The NCSD Qualification Program is described in Y/DD-694, Qualification Program, Nuclear Criticality Safety Department This document provides a listing of the roles and responsibilities of NCSD personnel with respect to training and details of the Training Management System (TMS) programs, Mentoring Checklists and Checksheets, as well as other documentation utilized to implement the program. This document supersedes Y/DD-696, Revision 2, dated 3/27/96, Training Implementation, Nuclear Criticality Safety Department. There are no backfit requirements associated with revisions to this document
Safety training news

CERN Multimedia

Safety Training, HSE Unit

2014-01-01

SELF-RESCUE MASK The "Self-Rescue Mask" face-to-face training course has been replaced by a revised version. This measure concerns both the initial and the refresher course. For personnel who have successfully attended the initial or refresher Self-Rescue Mask training within the last three years, their Self-Rescue Mask training will still be valid. The course description and registration form can be found in the training catalogue on the Safety Training Service’s website or catalogue. The Self-Rescue Mask training course is a mandatory prerequisite for following the new "Portable ODH Detector" e-learning course. PORTABLE ODH DETECTOR A new e-learning awareness course, "Portable ODH Detector", is available via the SIR application on CERN’s intranet. Personnel requiring a portable ODH detector of the DRÄGER x-am 5000 type to allowed access th...
Preparedness of fire safety in underground train station: Comparison between train operators in Malaysia with other operators from the developed countries

Science.gov (United States)

Tajedi, Noor Aqilah A.; Sukor, Nur Sabahiah A.; Ismail, Mohd Ashraf M.; Shamsudin, Shahrul A.

2017-10-01

The purpose of this paper is to compare the fire evacuation plan and preparation at the underground train stations in the different countries. The methodology for this study was using the extended questionnaire survey to investigate the Rapid Rail Sdn Bhd, Malaysia's fire safety plan and preparation at the underground train stations. There were four sections in the questionnaire which included (i) background of the respondents, (ii) the details on the train stations, safety instruction and fire evacuation exercises (iii) technical systems, installation and equipment at the underground stations and (iv) procedures and technical changes related to fire safety that had been applied by the operators. Previously, the respondents from the different train operator services in the developed countries had completed the questionnaires. This paper extends the response from the Rapid Rail Sdn Bhd to compare the emergency procedures and preparation for fire event with the developed countries. As a result, this study found that the equipment and facilities that provided at the underground train stations that operated by Rapid Rail are relevant for fire safety procedures and needs. The main advantage for Rapid Rail is the underground stations were designed with two or more entrances/exits that may perform better evacuation compare to one main entrance/exit train stations in the other developed countries.
[Innovative training for enhancing patient safety. Safety culture and integrated concepts].

Science.gov (United States)

Rall, M; Schaedle, B; Zieger, J; Naef, W; Weinlich, M

2002-11-01

Patient safety is determined by the performance safety of the medical team. Errors in medicine are amongst the leading causes of death of hospitalized patients. These numbers call for action. Backgrounds, methods and new forms of training are introduced in this article. Concepts from safety research are transformed to the field of emergency medical treatment. Strategies from realistic patient simulator training sessions and innovative training concepts are discussed. The reasons for the high numbers of errors in medicine are not due to a lack of medical knowledge, but due to human factors and organisational circumstances. A first step towards an improved patient safety is to accept this. We always need to be prepared that errors will occur. A next step would be to separate "error" from guilt (culture of blame) allowing for a real analysis of accidents and establishment of meaningful incident reporting systems. Concepts with a good success record from aviation like "crew resource management" (CRM) training have been adapted my medicine and are ready to use. These concepts require theoretical education as well as practical training. Innovative team training sessions using realistic patient simulator systems with video taping (for self reflexion) and interactive debriefing following the sessions are very promising. As the need to reduce error rates in medicine is very high and the reasons, methods and training concepts are known, we are urged to implement these new training concepts widely and consequently. To err is human - not to counteract it is not.
Safety training parks – A case study on the effectiveness of the trainings

DEFF Research Database (Denmark)

Räsänen, Tuula; Sormunen, E.; Reiman, Arto

The Safety Training Park (STP) concept is a unique Finnish safety training innovation. The STP provides different actors of the construction industry and other branches a practical occupational safety and health (OSH) training area. To the authors’ knowledge, no such parks exist in Europe besides...... Finland. Objec-tive was to study the effectiveness of the STP trainings at a large case company which participated in this study and which has actively trained its personnel in the park. The study was conducted from February 2015 to Feb-ruary 2017. Several key success factors were identified...... in the interviews of this case study. In addition, the company OSH statistics (2010 – 2016) showed a positive development at safety level. However, The Nordic Safety Climate Questionnaire did not show any significant change of results in a one year period. According to the results of the group interviews...
Occupational safety training and practices in selected vocational training institutions and workplaces in Kampala, Uganda.

Science.gov (United States)

Kintu, Denis; Kyakula, Michael; Kikomeko, Joseph

2015-01-01

Several industrial accidents, some of them fatal, have been reported in Uganda. Causes could include training gaps in vocational training institutions (VTIs) and workplaces. This study investigated how occupational safety training in VTIs and workplaces is implemented. The study was carried out in five selected VTIs and workplaces in Kampala. Data were collected from instructors, workshop technicians, students, workshop managers, production supervisors, machine operators and new technicians in the workplaces. A total of 35 respondents participated in the study. The results revealed that all curricula in VTIs include a component of safety but little is practiced in VTI workshops; in workplaces no specific training content was followed and there were no regular consultations between VTIs and industry on safety skills requirements, resulting in a mismatch in safety skills training. The major constraints to safety training include inadequate funds to purchase safety equipment and inadequate literature on safety.
The European Nuclear Safety Training and Tutoring Institute

International Nuclear Information System (INIS)

2012-01-01

The European Nuclear Safety Training and Tutoring Institute, ENSTTI, is an initiative of European Technical Safety Organizations (TSO) in order to provide vocational training and tutoring in the methods and practices required to perform assessment in nuclear safety, nuclear security and radiation protection. ENSTTI calls on TSOs' expertise to maximize the transmission of safety and security knowledge, practical experience and culture. Training, tutoring and courses for specialists are achieved through practical lectures, working group and technical visits and lead to a certificate after knowledge testing. ENSTTI contributes to the harmonization of nuclear safety and security practices and to the networking of today and future nuclear safety experts in Europe and beyond. (A.C.)
Management commitment to safety vs. employee perceived safety training and association with future injury.

Science.gov (United States)

Huang, Yueng-Hsiang; Verma, Santosh K; Chang, Wen-Ruey; Courtney, Theodore K; Lombardi, David A; Brennan, Melanye J; Perry, Melissa J

2012-07-01

The purpose of this study is to explore and examine, specific to the restaurant industry, two important constructs emerging from the safety climate literature: employee perceptions of safety training and management commitment to safety. Are these two separate constructs? Are there both individual- and shared group-level safety perceptions for these two constructs? What are the relationships between these two constructs and future injury outcomes? A total of 419 employees from 34 limited-service restaurants participated in a prospective cohort study. Employees' perceptions of management commitment to safety and safety training and demographic variables were collected at the baseline. The survey questions were made available in three languages: English, Spanish, and Portuguese. For the following 12 weeks, participants reported their injury experience and weekly work hours. A multivariate negative binomial generalized estimating equation model with compound symmetry covariance structure was used to assess the association between the rate of self-reported injuries and measures of safety perceptions. Even though results showed that the correlation between employees'perceived safety training and management commitment to safety was high, confirmatory factor analysis of measurement models showed that two separate factors fit the model better than as two dimensions of a single factor. Homogeneity tests showed that there was a shared perception of the factor of management commitment to safety for the restaurant workers but there was no consistent perception among them for the factor of perceived safety training. Both individual employees'perceived management commitment to safety and perceptions of safety training can predict employees' subsequent injuries above and beyond demographic variables. However, there was no significant relationship between future injury and employees' shared perception of management commitment to safety. Further, our results suggest that the
Nuclear criticality safety: 2-day training course

International Nuclear Information System (INIS)

Schlesser, J.A.

1997-02-01

This compilation of notes is presented as a source reference for the criticality safety course. At the completion of this training course, the attendee will: be able to define terms commonly used in nuclear criticality safety; be able to appreciate the fundamentals of nuclear criticality safety; be able to identify factors which affect nuclear criticality safety; be able to identify examples of criticality controls as used as Los Alamos; be able to identify examples of circumstances present during criticality accidents; have participated in conducting two critical experiments; be asked to complete a critique of the nuclear criticality safety training course

Nuclear criticality safety: 2-day training course

Energy Technology Data Exchange (ETDEWEB)

Schlesser, J.A. [ed.] [comp.

1997-02-01

This compilation of notes is presented as a source reference for the criticality safety course. At the completion of this training course, the attendee will: be able to define terms commonly used in nuclear criticality safety; be able to appreciate the fundamentals of nuclear criticality safety; be able to identify factors which affect nuclear criticality safety; be able to identify examples of criticality controls as used as Los Alamos; be able to identify examples of circumstances present during criticality accidents; have participated in conducting two critical experiments; be asked to complete a critique of the nuclear criticality safety training course.
Safety Training: Access rights underground and safety training

CERN Multimedia

Laetitia Laddada

2004-01-01

This is to remind all CERN Group Leaders/GLIMOS of their obligation to ensure that members of their group/experiment or personnel belonging to firms holding contracts under their responsibility have received the necessary training/instruction in safety before start of work. Access underground will only be authorized upon attendance at safety courses level 1, 2 and 3, provided by the CERN Fire Brigade. All persons not having attended these courses will be locked out. All individuals concerned, as well as their Group Leaders/GLIMOS should check the access rights of their staff at the URL: https://hrt.cern.ch/servlet/cern.hrt.Access.Access In case you or your collaborators do not have the requested authorisation, you/they must attend the safety courses provided every Tuesday by the Fire Brigade or the additional courses on: 16 June, course given in French, 9 a.m. - 12 a.m., AB Auditorium I (Bldg. 6/2-024), 17 June, course given in English, 2 p.m. - 5 p.m., AB Auditorium I (Bldg. 6/2-024). Formation en SEC...
OSHA Training Programs. Module SH-48. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on OSHA (Occupational Safety and Health Act) training programs is one of 50 modules concerned with job safety and health. This module provides a list of OSHA training requirements and describes OSHA training programs and other safety organizations' programs. Following the introduction, 11 objectives (each keyed to a page in the…
Development of Safety Review Guidance for Research and Training Reactors

International Nuclear Information System (INIS)

Oh, Kju-Myeng; Shin, Dae-Soo; Ahn, Sang-Kyu; Lee, Hoon-Joo

2007-01-01

The KINS already issued the safety review guidance for pressurized LWRs. But the safety review guidance for research and training reactors were not developed. So, the technical standard including safety review guidance for domestic research and training reactors has been applied mutates mutandis to those of nuclear power plants. It is often difficult for the staff to effectively perform the safety review of applications for the permit by the licensee, based on peculiar safety review guidance. The NRC and NSC provide the safety review guidance for test and research reactors and European countries refer to IAEA safety requirements and guides. The safety review guide (SRG) of research and training reactors was developed considering descriptions of the NUREG- 1537 Part 2, previous experiences of safety review and domestic regulations for related facilities. This study provided the safety review guidance for research and training reactors and surveyed the difference of major acceptance criteria or characteristics between the SRG of pressurized light water reactor and research and training reactors
INDUSTRIAL TRAINING AND TRAINING IN SAFETY, A STATEMENT BY THE CENTRAL TRAINING COUNCIL. MEMORANDUM NUMBER 2.

Science.gov (United States)

Ministry of Labour, London (England).

THE TRAINING OF WORKERS IN SAFETY AND IN SAFE METHODS OF WORK IS AN ESSENTIAL PART OF ACCIDENT PREVENTION. IT IS A MANAGEMENT RESPONSIBILITY TO DO THIS, AND, TO BE EFFECTIVE, MANAGEMENT ITSELF MUST BE CONVINCED OF THE NEED FOR SAFETY TRAINING. IT SHOULD BE CARRIED OUT AS PART OF THE NORMAL TRAINING WHICH ALL ENTRANTS TO INDUSTRY RECEIVE. THE…
Improving mine safety technology and training: establishing US global leadership

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-12-15

In 2006, the USA's record of mine safety was interrupted by fatalities that rocked the industry and caused the National Mining Association and its members to recommit to returning the US underground coal mining industry to a global mine safety leadership role. This report details a comprehensive approach to increase the odds of survival for miners in emergency situations and to create a culture of prevention of accidents. Among its 75 recommendations are a need to improve communications, mine rescue training, and escape and protection of miners. Section headings of the report are: Introduction; Review of mine emergency situations in the past 25 years: identifying and addressing the issues and complexities; Risk-based design and management; Communications technology; Escape and protection strategies; Emergency response and mine rescue procedures; Training for preparedness; Summary of recommendations; and Conclusions. 37 refs., 3 figs., 5 apps.
Control maintenance training program for special safety systems at Bruce B

International Nuclear Information System (INIS)

Reinwald, G.

1997-01-01

It was recognized from the early days of commissioning of Bruce B that Control Maintenance staff would require a level of expertise to be able to maintain Special Safety Systems in proper running order. In the early 80's this was achieved through hands on experience during the original commissioning, troubleshooting and placing of the various systems in service. Control maintenance procedures were developed and implemented as the new systems came available for commissioning, as were operating manuals,training manuals etc. Under the development of the Maintenance Manager, a Conduct of Maintenance section was organized. One of the responsibilities of this section was to develop a series of Maintenance Administrative Procedures (MAPs) that set the standards for maintenance activities including training
Safety Training and Awareness: a team at your service

CERN Multimedia

HSE Unit

2014-01-01

Ever wondered who is on the other end of the safety-training@cern.ch e-mail address? If so, you might like to know that all the activities relating to safety training and awareness (“Safety Training" for short) are managed by a team dedicated to ensuring the smooth running of CERN’s safety training courses. Photo: Christoph Balle. This team currently consists of five people: the manager in charge of coordinating all the projects, two administrative assistants who provide logistical support and two technicians who manage the training centre. This team, which has seen its workload and the number of challenges it faces increase considerably with LS1, is responsible for organising classroom training sessions (in partnership with some 15 training bodies) and for the management of online e-learning courses in partnership with the GS-AIS Group. The members of the team don't just deal with enrolment on the courses: they also help with the development...
Laser safety tools and training

CERN Document Server

Barat, Ken

2008-01-01

Lasers perform many unique functions in a plethora of applications, but there are many inherent risks with this continually burgeoning technology. Laser Safety: Tools and Training presents simple, effective ways for users in a variety of facilities to evaluate the hazards of any laser procedure and ensure they are following documented laser safety standards.Designed for use as either a stand-alone volume or a supplement to Laser Safety Management, this text includes fundamental laser and laser safety information and critical laser use information rarely found in a single source. The first lase
Use of a web site to enhance criticality safety training

International Nuclear Information System (INIS)

Huang, Song T.; Morman, James A.

2003-01-01

Establishment of the NCSP (Nuclear Criticality Safety Program) website represents one attempt by the NCS (Nuclear Criticality Safety) community to meet the need to enhance communication and disseminate NCS information to a wider audience. With the aging work force in this important technical field, there is a common recognition of the need to capture the corporate knowledge of these people and provide an easily accessible, web-based training opportunity to those people just entering the field of criticality safety. A multimedia-based site can provide a wide range of possibilities for criticality safety training. Training modules could range from simple text-based material, similar to the NCSET (Nuclear Criticality Safety Engineer Training) modules, to interactive web-based training classes, to video lecture series. For example, the Los Alamos National Laboratory video series of interviews with pioneers of criticality safety could easily be incorporated into training modules. Obviously, the development of such a program depends largely upon the need and participation of experts who share the same vision and enthusiasm of training the next generation of criticality safety engineers. The NCSP website is just one example of the potential benefits that web-based training can offer. You are encouraged to browse the NCSP website at http://ncsp.llnl.gov. We solicit your ideas in the training of future NCS engineers and welcome your participation with us in developing future multimedia training modules. (author)
Evaluation of the food safety training for food handlers in restaurant operations

Science.gov (United States)

Park, Sung-Hee; Kwak, Tong-Kyung

2010-01-01

This study examined the extent of improvement of food safety knowledge and practices of employee through food safety training. Employee knowledge and practice for food safety were evaluated before and after the food safety training program. The training program and questionnaires for evaluating employee knowledge and practices concerning food safety, and a checklist for determining food safety performance of restaurants were developed. Data were analyzed using the SPSS program. Twelve restaurants participated in this study. We split them into two groups: the intervention group with training, and the control group without food safety training. Employee knowledge of the intervention group also showed a significant improvement in their score, increasing from 49.3 before the training to 66.6 after training. But in terms of employee practices and the sanitation performance, there were no significant increases after the training. From these results, we recommended that the more job-specific and hand-on training materials for restaurant employees should be developed and more continuous implementation of the food safety training and integration of employee appraisal program with the outcome of safety training were needed. PMID:20198210
Occupational Safety. Hygiene Safety. Pre-Apprenticeship Phase 1 Training.

Science.gov (United States)

Lane Community Coll., Eugene, OR.

This self-paced student training module on hygiene safety is one of a number of modules developed for Pre-apprenticeship Phase 1 Training. Purpose of the module is to familiarize students with the different types of airborne contaminants--including noise--which may be health hazards and with the proper hygienic measures for dealing with them. The…
[Does simulator-based team training improve patient safety?].

Science.gov (United States)

Trentzsch, H; Urban, B; Sandmeyer, B; Hammer, T; Strohm, P C; Lazarovici, M

2013-10-01

Patient safety became paramount in medicine as well as in emergency medicine after it was recognized that preventable, adverse events significantly contributed to morbidity and mortality during hospital stay. The underlying errors cannot usually be explained by medical technical inadequacies only but are more due to difficulties in the transition of theoretical knowledge into tasks under the conditions of clinical reality. Crew Resource Management and Human Factors which determine safety and efficiency of humans in complex situations are suitable to control such sources of error. Simulation significantly improved safety in high reliability organizations, such as the aerospace industry.Thus, simulator-based team training has also been proposed for medical areas. As such training is consuming in cost, time and human resources, the question of the cost-benefit ratio obviously arises. This review outlines the effects of simulator-based team training on patient safety. Such course formats are not only capable of creating awareness and improvements in safety culture but also improve technical team performance and emphasize team performance as a clinical competence. A few studies even indicated improvement of patient-centered outcome, such as a reduced rate of adverse events but further studies are required in this respect. In summary, simulator-based team training should be accepted as a suitable strategy to improve patient safety.
The development of NPP operational safety training courses

International Nuclear Information System (INIS)

Lee, Chang Kun; Lee, Duk Sun; Lee, Byung Sun; Lee, Won Koo; Juhn, Heng Run; Moon, Byung Soo; Cho, Min Sik; Lee, Han Young; Moon, Hak Won; Seo, Yeon Ho

1987-12-01

The objective of the project is to develop a training course text for the betterment of reactor operation and assurance of its safety in general by providing training materials of the advanced compact nuclear simulator which will become operation in September 1988. Main scope and contents of the project are as follows: - compilation of basic data related to simulator operation and maintenance as well as the comparative analysis with respect to simulator materials in foreign countries - method of training by simulator - review the training status by simulator in foreign countries - development of training course in the field of reactor safety It is expected that the results will be reflected to the actual training and retraining of the reactor operating crew so as to improve and update their capabilities in training fashion. (Author)
Safety training: places available in September 2014

CERN Multimedia

HSE Unit

2014-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue (see here). Please note that there are 7 places left on the “Territorial Safety Officer (TSO) – Initial” course on September 23-25, 2014 (in French).
Computer-based and web-based radiation safety training

Energy Technology Data Exchange (ETDEWEB)

Owen, C., LLNL

1998-03-01

The traditional approach to delivering radiation safety training has been to provide a stand-up lecture of the topic, with the possible aid of video, and to repeat the same material periodically. New approaches to meeting training requirements are needed to address the advent of flexible work hours and telecommuting, and to better accommodate individuals learning at their own pace. Computer- based and web-based radiation safety training can provide this alternative. Computer-based and web- based training is an interactive form of learning that the student controls, resulting in enhanced and focused learning at a time most often chosen by the student.
Employers' Occupational Health and Safety Training Obligations in Framework Directive and Training Procedure and Rules in Turkey

OpenAIRE

Nuray Gökçek Karaca; Berrin Gökçek

2015-01-01

Employers occupational safety and health training obligations are regulated in 89/391/EEC Framework Directive and also in 6331 numbered Occupational Health and Safety Law in Turkey. The main objective of this research is to determine and evaluate the employers’ occupational health and safety training obligations in Framework Directive in comparison with the 6331 numbered Occupational Health and Safety Law and to examine training principles in Turkey. For this purpose, ...
A case for safety leadership team training of hospital managers.

Science.gov (United States)

Singer, Sara J; Hayes, Jennifer; Cooper, Jeffrey B; Vogt, Jay W; Sales, Michael; Aristidou, Angela; Gray, Garry C; Kiang, Mathew V; Meyer, Gregg S

2011-01-01

Delivering safe patient care remains an elusive goal. Resolving problems in complex organizations like hospitals requires managers to work together. Safety leadership training that encourages managers to exercise learning-oriented, team-based leadership behaviors could promote systemic problem solving and enhance patient safety. Despite the need for such training, few programs teach multidisciplinary groups of managers about specific behaviors that can enhance their role as leadership teams in the realm of patient safety. The aims of this study were to describe a learning-oriented, team-based, safety leadership training program composed of reinforcing exercises and to provide evidence confirming the need for such training and demonstrating behavior change among management groups after training. Twelve groups of managers from an academic medical center based in the Northeast United States were randomly selected to participate in the program and exposed to its customized, experience-based, integrated, multimodal curriculum. We extracted data from transcripts of four training sessions over 15 months with groups of managers about the need for the training in these groups and change in participants' awareness, professional behaviors, and group activity. Training transcripts confirmed the need for safety leadership team training and provided evidence of the potential for training to increase targeted behaviors. The training increased awareness and use of leadership behaviors among many managers and led to new routines and coordinated effort among most management groups. Enhanced learning-oriented leadership often helped promote a learning orientation in managers' work areas. Team-based training that promotes specific learning-oriented leader behaviors can promote behavioral change among multidisciplinary groups of hospital managers.
A theory-driven, longitudinal evaluation of the impact of team training on safety culture in 24 hospitals.

Science.gov (United States)

Jones, Katherine J; Skinner, Anne M; High, Robin; Reiter-Palmon, Roni

2013-05-01

Effective teamwork facilitates collective learning, which is integral to safety culture. There are no rigorous evaluations of the impact of team training on the four components of safety culture-reporting, just, flexible and learning cultures. We evaluated the impact of a year-long team training programme on safety culture in 24 hospitals using two theoretical frameworks. We used two quasi-experimental designs: a cross-sectional comparison of hospital survey on patient safety culture (HSOPS) results from an intervention group of 24 hospitals to a static group of 13 hospitals and a pre-post comparison of HSOPS results within intervention hospitals. Dependent variables were HSOPS items representing the four components of safety culture; independent variables were derived from items added to the HSOPS that measured the extent of team training, learning and transfer. We used a generalised linear mixed model approach to account for the correlated nature of the data. 59% of 2137 respondents from the intervention group reported receiving team training. Intervention group HSOPS scores were significantly higher than static group scores in three dimensions assessing the flexible and learning components of safety culture. The distribution of the adoption of team behaviours (transfer) varied in the intervention group from 2.8% to 31.0%. Adoption of team behaviours was significantly associated with odds of an individual reacting more positively at reassessment than baseline to nine items reflecting all four components of safety culture. Team training can result in transformational change in safety culture when the work environment supports the transfer of learning to new behaviour.
Evaluation of the food safety training for food handlers in restaurant operations

OpenAIRE

Park, Sung-Hee; Kwak, Tong-Kyung; Chang, Hye-Ja

2010-01-01

This study examined the extent of improvement of food safety knowledge and practices of employee through food safety training. Employee knowledge and practice for food safety were evaluated before and after the food safety training program. The training program and questionnaires for evaluating employee knowledge and practices concerning food safety, and a checklist for determining food safety performance of restaurants were developed. Data were analyzed using the SPSS program. Twelve restaur...

One size fits all: Safety training for 10,000 workers

International Nuclear Information System (INIS)

March, J.

1998-01-01

Last summer, the author participated in a major, orchestrated, training event at Los Alamos designed to convey some of the key components of ISM to the workforce. The event was called Safety Days 1997. The objectives were to produce a genuine training event that was logical, focused, interactive, well-written, easy to follow, and that provided people with choices rather than a rigid script. This was the first effort at the Laboratory to organize a way for middle managers to become the safety trainers of their work teams. While upper management supported the concept and product, many were satisfied with the notion of simply creating a time for workers to discuss safety concerns. This paper considers the context of Safety Days 1997, how the training was received, the response to that training, and recommendations for Safety Days 1998
Safety Training: scheduled sessions in April

CERN Multimedia

DGS Unit

2011-01-01

The following training courses are scheduled in April. You can find the full Safety Training programme on the Safety Training online catalogue. If you are interested in attending any of the below courses, please talk to your supervisor, then apply electronically via EDH from the course description pages, by clicking on SIGN-UP. Registration for all courses is always open – sessions for the less-requested courses are organized on a demand-basis only. Depending on the demand, a session will be organised later in the year. Biocell Training 26-APR-11 (08.30 – 10.00) in French 26-APR-11 (10.30 – 12.00) in French Conduite de plates-formes élévatrices mobiles de personnel (PEMP) 28-APR-11 to 29-APR-11 (08.00 – 17.30) in French* Sécurité chimique – Introduction 29-APR-11 (09.00 – 11.30) in French (*) session in French with the possibility of receiving the documentation in English By Isabelle Cusato (H...
Nuclear criticality safety specialist training and qualification programs

International Nuclear Information System (INIS)

Hopper, C.M.

1993-01-01

Since the beginning of the Nuclear Criticality Safety Division of the American Nuclear Society (ANS) in 1967, the nuclear criticality safety (NCS) community has sought to provide an exchange of information at a national level to facilitate the education and development of NCS specialists. In addition, individual criticality safety organizations within government contractor and licensed commercial nonreactor facilities have developed training and qualification programs for their NCS specialists. However, there has been substantial variability in the content and quality of these program requirements and personnel qualifications, at least as measured within the government contractor community. The purpose of this paper is to provide a brief, general history of staff training and to describe the current direction and focus of US DOE guidance for the content of training and qualification programs designed to develop NCS specialists
[Training in patient safety in medical and nursing schools].

Science.gov (United States)

Mira, J J; Guilabert, M; Vitaller, J; Ignacio, E

2016-01-01

To compare the information on patient safety received by students of medicine and nursing. Cross-sectional study was conducted using a convenience sample of medical and nursing students of 3 Universities. The Latin Patient Safety Student Information and a test of 5 questions with 5 options were used. A sample of 79 students in each group was enrolled to detect differences of .3 units (bilateral estimation), considering 80% statistical power and 95% confidence interval. A total of 144 students replied (74 nursing and 70 medicine students). Nursing students achieved higher scores in the communication with patients factor (3.8 vs 3.2, P<.001) and proactive attitude to identify risks for patient safety (4.3 vs 3.8, P<.001). Medical students were more aware of the inevitability of adverse events (2.3 vs 3.1, P<.001). Ten (7%) students had only one fault in the test, and only one (1%) answered all questions correctly. The training in patient safety should be improved both in nursing and medicine, although nursing students receive more information. Copyright © 2015 SECA. Published by Elsevier Espana. All rights reserved.
Children Road Safety Training with Augmented Reality (AR) [Demo

OpenAIRE

Lugmayr, Artur; Tsang, Joyce; Williams, Toby; Lim, Casey X; Teo, Yeet Yung; Farmer, Matthew

2018-01-01

Children killed or seriously injured through road accidents can be avoided through an appropriate safety training. Through play and engagement children learn and understand hazards at i.e. railway stations, bus stops, crossings, school zones, train stations, footpaths, or while cycling. We developed a rapid prototype of an Augmented Reality (AR) safety training proof-of-concept demonstrator for a scaled real-world model of dangerous road hazards. Two scenarios have been picked to give childre...
The role of staff training in the safety of nuclear facilities

International Nuclear Information System (INIS)

Koechlin, J.C.; Tanguy, P.

1980-01-01

Although nuclear energy largely involves automatic protection systems enabling the effects of human error to be mitigated, the human factor still remains of extreme importance in nuclear risk analysis. Hence, the attainment of the high safety standards sought after for nuclear energy must of necessity entail staff training programmes which take into account the concern for nuclear safety. It is incumbent upon constructors and operators to evolve a training programme suited to each job, and the safety authorities are responsible for assessing whether the programme is satisfactory from the standpoint of safety and, where necessary, for issuing the relevant certificates or permits. The paper makes some comments on the cost of human error and the profitability of investment in training, on the importance of practical training and of the role of simulators, and on the need for operators to note and analyse all operational abnormalities, which are so often an advance warning of accidents. The training of special safety teams is examined, with consideration of three aspects: safety assessment, inspection, and action to be taken in the event of accident. Finally, some information is given on the human reliability studies under way and their implications for nuclear safety and training, with emphasis on the valuable assistance rendered in this matter by international organizations. (author)
Occupational Safety. Hand Tools. Pre-Apprenticeship Phase 1 Training.

Science.gov (United States)

Lane Community Coll., Eugene, OR.

This self-paced student training module on safety when using hand tools is one of a number of modules developed for Pre-apprenticeship Phase 1 Training. Purpose of the module is to teach students the correct safety techniques for operating common hand- and arm-powered tools, including selection, maintenance, technique, and uses. The module may…
[Patient safety in education and training of healthcare professionals in Germany].

Science.gov (United States)

Hoffmann, Barbara; Siebert, H; Euteneier, A

2015-01-01

In order to improve patient safety, healthcare professionals who care for patients directly or indirectly are required to possess specific knowledge and skills. Patient safety education is not or only poorly represented in education and examination regulations of healthcare professionals in Germany; therefore, it is only practiced rarely and on a voluntary basis. Meanwhile, several training curricula and concepts have been developed in the past 10 years internationally and recently in Germany, too. Based on these concepts the German Coalition for Patient Safety developed a catalogue of core competencies required for safety in patient care. This catalogue will serve as an important orientation when patient safety is to be implemented as a subject of professional education in Germany in the future. Moreover, teaching staff has to be trained and educational and training activities have to be evaluated. Patient safety education and training for (undergraduate) healthcare professional will require capital investment.
Maritime Safety and Security Challenges – 3D Simulation Based Training

Directory of Open Access Journals (Sweden)

Christoph Felsenstein

2013-09-01

Full Text Available Maritime Safety and Security on board ships very much depends on well trained crews. That is why training and exercising emergency response procedures as well as efficiency in reliable management are extremely necessary. On the other hand research as well as technological development in safety and security, tools and other kinds of technical and organizational systems contribute to further improvement and guarantee high levels of safety and security in maritime transportation. Simulation facilities are essential for both exercising and training but also for research and technological development. This paper introduces the innovative concept of a safety and security training simulator (SST7 and describes research work related to the implementation of training scenarios. Selected results of a case study will be presented. A shorter version of this paper was originally presented at the International Conference on “Marine Navigation and Safety of Sea Transportation” at Gdynia in June 2013.
SafetyNet. Human factors safety training on the Internet

DEFF Research Database (Denmark)

Hauland, G.; Pedrali, M.

2002-01-01

This report describes user requirements to an Internet based distance learning system of human factors training, i.e. the SafetyNet prototype, within the aviation (pilots and air traffic control), maritime and medical domains. User requirements totraining have been elicited through 19 semi...
Safety Training: scheduled sessions in March

CERN Multimedia

DGS Unit

2011-01-01

The following training courses are scheduled in March. You can find the full Safety Training programme on the Safety Training online catalogue. If you are interested in attending any of the below courses, please talk to your supervisor, then apply electronically via EDH from the course description pages, by clicking on SIGN-UP. Registration for all courses is always open – sessions for the less-requested courses are organized on a demand-basis only. Depending on the demand, a session will be organised later in the year. Biocell Training 08-MAR-11 (08.30 – 10.00) in English 08-MAR-11 (10.30 – 12.00) in French 15-MAR-11 (08.30 – 10.00) in French 15-MAR-11 (10.30 – 12.00) in French 17-MAR-11 (08.30 – 10.00) in English 17-MAR-11 (10.30 – 12.00) in English 22-MAR-11 (08.30 – 10.00) in French 22-MAR-11 (10.30 – 12.00) in French 24-MAR-11 (08.30 – 10.00) in French 24-MAR-11 (10.30 – 12.00) in French 29-MAR...
Safety Training: scheduled sessions in May

CERN Multimedia

Isabelle Cusato (HSE Unit)

2011-01-01

The following training courses are scheduled in March. You can find the full Safety Training programme on the Safety Training online catalogue. If you are interested in attending any of the below courses, please talk to your supervisor, then apply electronically via EDH from the course description pages, by clicking on SIGN-UP. Registration for all courses is always open – sessions for the less-requested courses are organized on a demand-basis only. Depending on the demand, a session will be organised later in the year. Biocell Training 10-MAY-11 (08.30 – 10.00) in French 10-MAY-11 (10.30 – 12.00) in French 12-MAY-11 (08.30 – 10.00) in English 12-MAY-11 (10.30 – 12.00) in English 19-MAY-11 (08.30 – 10.00) in French 19-MAY-11 (10.30 – 12.00) in French 24-MAY-11 (08.30 – 10.00) in English 24-MAY-11 (10.30 – 12.00) in English Champs Magnétiques 13-MAY-11 (09.30 – 11.30) in French...
Experience with performance based training of nuclear criticality safety engineers

International Nuclear Information System (INIS)

Taylor, R.G.

1993-01-01

Historically, new entrants to the practice of nuclear criticality safety have learned their job primarily by on-the-job training (OJT) often by association with an experienced nuclear criticality safety engineer who probably also learned their job by OJT. Typically, the new entrant learned what he/she needed to know to solve a particular problem and accumulated experience as more problems were solved. It is likely that more formalism will be required in the future. Current US Department of Energy requirements for those positions which have to demonstrate qualification indicate that it should be achieved by using a systematic approach such as performance based training (PBT). Assuming that PBT would be an acceptable mechanism for nuclear criticality safety engineer training in a more formal environment, a site-specific analysis of the nuclear criticality safety engineer job was performed. Based on this analysis, classes are being developed and delivered to a target audience of newer nuclear criticality safety engineers. Because current interest is in developing training for selected aspects of the nuclear criticality safety engineer job, the analysis i's incompletely developed in some areas. Details of this analysis are provided in this report
Nuclear Criticality Safety Organization training implementation. Revision 4

International Nuclear Information System (INIS)

Carroll, K.J.; Taylor, R.G.; Worley, C.A.

1997-01-01

The Nuclear Criticality Safety Organization (NCSO) is committed to developing and maintaining a staff of qualified personnel to meet the current and anticipated needs in Nuclear Criticality Safety (NCS) at the Oak Ridge Y-12 Plant. This document provides a listing of the roles and responsibilities of NCSO personnel with respect to training and details of the Training Management System (TMS) programs, Mentoring Checklists and Checksheets, as well as other documentation utilized to implement the program. This Training Implementation document is applicable to all technical and managerial NCSO personnel, including temporary personnel, sub-contractors and/or LMES employees on loan to the NCSO, who are in a qualification program
Nuclear Criticality Safety Organization training implementation. Revision 4

Energy Technology Data Exchange (ETDEWEB)

Carroll, K.J.; Taylor, R.G.; Worley, C.A.

1997-05-19

The Nuclear Criticality Safety Organization (NCSO) is committed to developing and maintaining a staff of qualified personnel to meet the current and anticipated needs in Nuclear Criticality Safety (NCS) at the Oak Ridge Y-12 Plant. This document provides a listing of the roles and responsibilities of NCSO personnel with respect to training and details of the Training Management System (TMS) programs, Mentoring Checklists and Checksheets, as well as other documentation utilized to implement the program. This Training Implementation document is applicable to all technical and managerial NCSO personnel, including temporary personnel, sub-contractors and/or LMES employees on loan to the NCSO, who are in a qualification program.
Effect of the interval of training course on understanding of radiation safety and an improvement of re-training course

International Nuclear Information System (INIS)

Miyoshi, Hirokazu; Yamamoto, Yasuyo; Adachi, Akio

2005-01-01

Radiation safety training courses are indispensable educational programs for radiation workers. We have two kinds of courses, which are held before use of radioisotope (beginner's training course) and held annually (re-training course). The interval between two courses was found to give some effects for radiation worker's recognition and knowledge on radiation safety through the result of examination and questionnaire on the radiation safety after training. The average scores of participants indicated that the short interval (3 months) was better than the long interval (almost one year). Furthermore, the average scores of participants in the 2003 training course were higher than those in the 2002 and 2001 training courses. Several participants were found to lack in the basic radiation safety attitude and knowledge. In order to improve these results, the practical training should be given additionally for workers, who lacked in understanding. (author)
IMPROVING THE POSITIONING ACCURACY OF TRAIN ON THE APPROACH SECTION TO THE RAILWAY CROSSING

Directory of Open Access Journals (Sweden)

V. I. Havryliuk

2016-02-01

Full Text Available Purpose. In the paper it is necessary to analyze possibility of improving the positioning accuracy of train on the approach section to crossing for traffic safety control at railway crossings. Methodology. Researches were performed using developed mathematical model, describing dependence of the input impedance of the coded and audio frequency track circuits on a train coordinate at various values of ballast isolation resistances and for all usable frequencies. Findings. The paper presents the developed mathematical model, describing dependence of the input impedance of the coded and audio-frequency track circuits on the train coordinate at various values of ballast isolation resistances and for all frequencies used in track circuits. The relative error determination of train coordinate by input impedance caused by variation of the ballast isolation resistance for the coded track circuits was investigated. The values of relative error determination of train coordinate can achieve up to 40-50 % and these facts do not allow using this method directly for coded track circuits. For short audio frequency track circuits on frequencies of continuous cab signaling (25, 50 Hz the relative error does not exceed acceptable values, this allow using the examined method for determination of train location on the approach section to railway crossing. Originality. The developed mathematical model allowed determination of the error dependence of train coordinate by using input impedance of the track circuit for coded and audio-frequency track circuits at various frequencies of the signal current and at different ballast isolation resistances. Practical value. The authors proposethe method for train location determination on approach section to the crossing, equipped with audio-frequency track circuits, which is a combination of discrete and continuous monitoring of the train location.
Fieldcrest Cannon, Inc. Advanced Technical Preparation. Statistical Process Control (SPC). Safety Section: Modules 1-3. Instructor Book.

Science.gov (United States)

Averitt, Sallie D.

These three modules, which were developed for use by instructors in a manufacturing firm's advanced technical preparation program, contain the materials required to present the safety section of the plant's adult-oriented, job-specific competency-based training program. The 3 modules contain 12 lessons on the following topics: lockout/tagout…
Fall prevention and safety communication training for foremen: report of a pilot project designed to improve residential construction safety.

Science.gov (United States)

Kaskutas, Vicki; Dale, Ann Marie; Lipscomb, Hester; Evanoff, Brad

2013-02-01

Falls from heights account for 64% of residential construction worker fatalities and 20% of missed work days. We hypothesized that worker safety would improve with foremen training in fall prevention and safety communication. Training priorities identified through foreman and apprentice focus groups and surveys were integrated into an 8-hour training. We piloted the training with ten foremen employed by a residential builder. Carpenter trainers contrasted proper methods to protect workers from falls with methods observed at the foremen's worksites. Trainers presented methods to deliver toolbox talks and safety messages. Results from worksite observational audits (n=29) and foremen/crewmember surveys (n=97) administered before and after training were compared. We found that inexperienced workers are exposed to many fall hazards that they are often not prepared to negotiate. Fall protection is used inconsistently and worksite mentorship is often inadequate. Foremen feel pressured to meet productivity demands and some are unsure of the fall protection requirements. After the training, the frequency of daily mentoring and toolbox talks increased, and these talks became more interactive and focused on hazardous daily work tasks. Foremen observed their worksites for fall hazards more often. We observed increased compliance with fall protection and decreased unsafe behaviors during worksite audits. Designing the training to meet both foremen's and crewmembers' needs ensured the training was learner-centered and contextually-relevant. This pilot suggests that training residential foremen can increase use of fall protection, improve safety behaviors, and enhance on-the-job training and safety communication at their worksites. Construction workers' training should target safety communication and mentoring skills with workers who will lead work crews. Interventions at multiple levels are necessary to increase safety compliance in residential construction and decrease falls
The Dread Factor: How Hazards and Safety Training Influence Learning and Performance

Science.gov (United States)

Burke, Michael J.; Salvador, Rommel O.; Smith-Crowe, Kristin; Chan-Serafin, Suzanne; Smith, Alexis; Sonesh, Shirley

2011-01-01

On the basis of hypotheses derived from social and experiential learning theories, we meta-analytically investigated how safety training and workplace hazards impact the development of safety knowledge and safety performance. The results were consistent with an expected interaction between the level of engagement of safety training and hazardous…

75 FR 26266 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2010-05-11

... Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH) In...) Public Law 92-463. Purpose: The Safety and Occupational Health Study Section will review, discuss, and... cycles pertaining to research issues in occupational safety and health, and allied areas. It is the...
Nuclear criticality safety: 2-day training course

International Nuclear Information System (INIS)

Schlesser, J.A.

1992-11-01

This compilation of notes is presented as a source reference for the criticality safety course. At the completion of this training course, the attendee will: (1) be able to define terms commonly used in nuclear criticality safety; (2) be able to appreciate the fundamentals of nuclear criticality safety; (3) be able to identify factors which affect nuclear criticality safety; (4) be able to identify examples of criticality controls as used at Los Alamos; (5) be able to identify examples of circumstances present during criticality accidents; (6) have participated in conducting two critical experiments
Safety Training: Ergonomie - Sensibilisation à l'ergonomie bureautique

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. SAFETY TRAINING Laetitia Laddada tel. 73811 - 79236 safety.training@cern.ch Nous vous proposons une 1/2 journée de sensibilisation sur les risques engendrés par une mauvaise posture lors du travail sur écran (mal de dos, fatigue visuelle, douleurs des poignets...) et des bonnes pratiques pour y remédier. Les prochaines sessions auront lieu le 11 mars 2004. Les cours sont pris en charge par la Commission de Sécurité et animés par Clemente Pilly et Ribordy Marion de « PM postures...
Challenges in developing competency-based training curriculum for food safety regulators in India

Directory of Open Access Journals (Sweden)

Anitha Thippaiah

2014-01-01

Full Text Available Context: The Food Safety and Standards Act have redefined the roles and responsibilities of food regulatory workforce and calls for highly skilled human resources as it involves complex management procedures. Aims: 1 Identify the competencies needed among the food regulatory workforce in India. 2 Develop a competency-based training curriculum for food safety regulators in the country. 3 Develop training materials for use to train the food regulatory workforce. Settings and Design: The Indian Institute of Public Health, Hyderabad, led the development of training curriculum on food safety with technical assistance from the Royal Society for Public Health, UK and the National Institute of Nutrition, India. The exercise was to facilitate the implementation of new Act by undertaking capacity building through a comprehensive training program. Materials and Methods: A competency-based training needs assessment was conducted before undertaking the development of the training materials. Results: The training program for Food Safety Officers was designed to comprise of five modules to include: Food science and technology, Food safety management systems, Food safety legislation, Enforcement of food safety regulations, and Administrative functions. Each module has a facilitator guide for the tutor and a handbook for the participant. Essentials of Food Hygiene-I (Basic level, II and III (Retail/ Catering/ Manufacturing were primarily designed for training of food handlers and are part of essential reading for food safety regulators. Conclusion: The Food Safety and Standards Act calls for highly skilled human resources as it involves complex management procedures. Despite having developed a comprehensive competency-based training curriculum by joint efforts by the local, national, and international agencies, implementation remains a challenge in resource-limited setting.
Natural Gas Vehicle Cylinder Safety, Training and Inspection Project

Energy Technology Data Exchange (ETDEWEB)

Hank Seiff

2008-12-31

Under the auspices of the National Energy Technology Laboratory and the US Department of Energy, the Clean Vehicle Education Foundation conducted a three-year program to increase the understanding of the safe and proper use and maintenance of vehicular compressed natural gas (CNG) fuel systems. High-pressure fuel systems require periodic inspection and maintenance to insure safe and proper operation. The project addressed the needs of CNG fuel containers (cylinders) and associated high-pressure fuel system components related to existing law, codes and standards (C&S), available training and inspection programs, and assured coordination among vehicle users, public safety officials, fueling station operators and training providers. The program included a public and industry awareness campaign, establishment and administration of a cylinder inspector certification training scholarship program, evaluation of current safety training and testing practices, monitoring and investigation of CNG vehicle incidents, evaluation of a cylinder recertification program and the migration of CNG vehicle safety knowledge to the nascent hydrogen vehicle community.
Experience with performance based training of nuclear criticality safety engineers

International Nuclear Information System (INIS)

Taylor, R.G.

1993-01-01

For non-reactor nuclear facilities, the U.S. Department of Energy (DOE) does not require that nuclear criticality safety engineers demonstrate qualification for their job. It is likely, however, that more formalism will be required in the future. Current DOE requirements for those positions which do have to demonstrate qualification indicate that qualification should be achieved by using a systematic approach such as performance based training (PBT). Assuming that PBT would be an acceptable mechanism for nuclear criticality safety engineer training in a more formal environment, a site-specific analysis of the nuclear criticality safety engineer job was performed. Based on this analysis, classes are being developed and delivered to a target audience of newer nuclear criticality safety engineers. Because current interest is in developing training for selected aspects of the nuclear criticality safety engineer job, the analysis is incompletely developed in some areas
Evaluating the effectiveness of a logger safety training program.

Science.gov (United States)

Bell, Jennifer L; Grushecky, Shawn T

2006-01-01

Logger safety training programs are rarely, if ever, evaluated as to their effectiveness in reducing injuries. Workers' compensation claim rates were used to evaluate the effectiveness of a logger safety training program, the West Virginia Loggers' Safety Initiative (LSI). There was no claim rate decline detected in the majority (67%) of companies that participated in all 4 years of the LSI. Furthermore, their rate did not differ from the rest of the WV logging industry that did not participate in the LSI. Worker turnover was significantly related to claim rates; companies with higher turnover of employees had higher claim rates. Companies using feller bunchers to harvest trees at least part of the time had a significantly lower claim rate than companies not using them. Companies that had more inspections per year had lower claim rates. High injury rates persist even in companies that receive safety training; high employee turnover may affect the efficacy of training programs. The logging industry should be encouraged to facilitate the mechanization of logging tasks, to address barriers to employee retention, and to increase the number of in-the-field performance monitoring inspections. Impact on industry There are many states whose logger safety programs include only about 4-8 hours of safe work practices training. These states may look to West Virginia's expanded training program (the LSI) as a model for their own programs. However, the LSI training may not be reaching loggers due to the delay in administering training to new employees and high levels of employee turnover. Regardless of training status, loggers' claim rates decline significantly the longer they work for a company. It may be that high injury rates in the state of West Virginia would be best addressed by finding ways to encourage and facilitate companies to become more mechanized in their harvesting practices, and to increase employee tenure. Increasing the number of yearly performance inspections
Improving staff perception of a safety climate with crew resource management training.

Science.gov (United States)

Kuy, SreyRam; Romero, Ramon A L

2017-06-01

Communication failure is one of the top root causes in patient safety adverse events. Crew resource management (CRM) is a team building communication process intended to improve patient safety by improving team dynamics. First, to describe implementation of CRM in a Veterans Affair (VA) surgical service. Second, to assess whether staff CRM training is related to improvement in staff perception of a safety climate. Mandatory CRM training was implemented for all surgical service staff at a VA Hospital at 0 and 12 mo. Safety climate questionnaires were completed by operating room staff at a baseline, 6 and 12 mo after the initial CRM training. Participants reported improvement on all 27 points on the safety climate questionnaire at 6 mo compared with the baseline. At 12 mo, there was sustained improvement in 23 of the 27 areas. This is the first published report about the effect of CRM training on staff perception of a safety climate in a VA surgical service. We demonstrate that CRM training can be successfully implemented widespread in a surgical program. Overall, there was improvement in 100% of areas assessed on the safety climate questionnaire at 6 mo after CRM training. By 1 y, this improvement was sustained in 23 of 27 areas, with the areas of greatest improvement being the performance of briefings, collaboration between nurses and doctors, valuing nursing input, knowledge about patient safety, and institutional promotion of a patient safety climate. Published by Elsevier Inc.
20 CFR 638.803 - Safety.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Safety. 638.803 Section 638.803 Employees... THE JOB TRAINING PARTNERSHIP ACT Administrative Provisions § 638.803 Safety. (a) The Job Corps... shall be assigned to such jobs or training in accordance with appropriate health and safety practices...
Radiation safety training for industrial irradiators: What are we trying to accomplish?

International Nuclear Information System (INIS)

Smith, M.A.

1998-01-01

Radiation safety training at an industrial irradiator facility takes a different approach than the traditional methods and topics used at other facilities. Where the more routine industrial radiation users focus on standard training topics of contamination control, area surveys, and the traditional dogma of time, distance, and shielding, radiation safety in an industrial irradiation facility must be centered on preventing accidents. Because the primary methods for accomplishing that goal are engineering approaches such as safety system interlocks, training provided to facility personnel should address system operation and emergency actions. This presents challenges in delivering radiation safety training to an audience of varied educational and technical background where little to no commercially available training material specific to this type of operation exists
The effect of training and job interruptions on logging crews' safety in ...

African Journals Online (AJOL)

The effect of training and job interruptions on logging crews' safety in ... method, experienced and inexperienced crews were studied before training, after ... that provision of appropriate safety gears as well as delivery of on job training are ...
Criticality safety engineer training at WSRC

International Nuclear Information System (INIS)

Williamson, T.G.; Mincey, J.F.

1993-01-01

Two programs designed to prepare engineers for certification as criticality safety engineers are offered at Westinghouse Savannah River Company (WSRC). One program, Student On Loan Criticality Engineer Training (SOLCET), is an intensive 2-yr course involving lectures, rigorous problem assignments, and mentoring. The other program, In-Field Criticality Engineer Training (IN-FIELD), is a less intensive series of lectures and problem assignments. Both courses are conducted by members of the Applied Physics Group (APG) of the Savannah River Technical Center, the organization at WSRC responsible for the operation and maintenance of criticality codes and for training of code users
Training in nuclear and radiation safety in Latin American and Caribbean

International Nuclear Information System (INIS)

Papadopulos, S.; Diaz, O.; Larcher, A.; Echenique, L.; Nicolas, R.; Lombardi, R.; Quintana, G.

2013-01-01

From thirty-three years, Argentina has taken the commitment to train professionals in the field of nuclear and radiation safety for the care and protection of workers and public in general. Sponsored by the IAEA and supported by the Faculty of Engineering of the University of Buenos Aires (FIUBA), an undertaking was made to encourage the training of scientists and experts in the countries of the region in order to establish a strong safety culture in radiation in individuals and maintaining high standards of safety practices using ionizing radiation. In 2012, the Graduate Course in Radiation Protection and Safety of Radiation Sources has acquired the status of 'Specialization' of the FIUBA, a category that further hierarchies skills training in the subject. This is a highly anticipated achievement by the implications for academic institutions, national and regional level, contributing to the strengthening of the Regional Training Center for Latin America and the Caribbean, acknowledged in a long-term agreement between the IAEA and Argentina in September 2008. Due to increased demand for nuclear activity, it is important to continue and deepen further training in radiological and nuclear areas. In order to satisfy both national and regional needs a process of increase on training offer training is being carried out, under the jurisdiction frame of the Nuclear Regulatory Authority. This paper presents the achievements of the country so far as regards training of human resource in radiation protection and nuclear safety in the region and highlights the challenges ahead for the extension of the offer in education and training. (author)
Millwright Apprenticeship. Related Training Modules. 1.1-1.8 Safety.

Science.gov (United States)

Lane Community Coll., Eugene, OR.

This packet, part of the instructional materials for the Oregon apprenticeship program for millwright training, contains eight modules covering safety. The modules provide information on the following topics: general safety, hand tool safety, power tool safety, fire safety, hygiene, safety and electricity, types of fire and fire prevention, and…
Swiss-Slovak cooperation program: a training strategy for safety analyses

International Nuclear Information System (INIS)

Husarcek, J.

2000-01-01

During the 1996-1999 period, a new training strategy for safety analyses was implemented at the Slovak Nuclear Regulatory Authority (UJD) within the Swiss-Slovak cooperation programme in nuclear safety (SWISSLOVAK). The SWISSLOVAK project involved the recruitment, training, and integration of the newly established team into UJD's organizational structure. The training strategy consisted primarily of the following two elements: a) Probabilistic Safety Analysis (PSA) applications (regulatory review and technical evaluation of Level-1/Level-2 PSAs; PSA-based operational events analysis, PSA applications to assessment of Technical Specifications; and PSA-based hardware and/or procedure modifications) and b) Deterministic accident analyses (analysis of accidents and regulatory review of licensee Safety Analysis Reports; analysis of severe accidents/radiological releases and the potential impact of the containment and engineered safety systems, including the development of technical bases for emergency response planning; and application of deterministic methods for evaluation of accident management strategies/procedure modifications). The paper discusses the specific aspects of the training strategy performed at UJD in both the probabilistic and deterministic areas. The integration of team into UJD's organizational structure is described and examples of contributions of the team to UJD's statutory responsibilities are provided. (author)
Cycling in the African American Community : safety training guidelines and findings.

Science.gov (United States)

2013-08-01

This report is a program users manual for the Cycling in the African American Community (CAAC) safety training intervention. The CAAC safety training intervention was designed to nudge more African Americans, who are often beginning cyclists...
Safety and economic study of special trains

International Nuclear Information System (INIS)

Loscutoff, W.V.; Hall, R.J.

1976-01-01

A comparative evaluation is being conducted of the safety and economics of special (35 mph and less) and regular trains for shipment of spent fuels. The approach, pertinent considerations, and results to date are discussed. The preliminary conclusion is that special train requirements have potential for only a small reduction in the accident likelihood, while increasing the cost
Ionising radiation safety training in the Australian Defence Organisation (ADO)

International Nuclear Information System (INIS)

Jenks, G.J.; O'Donovan, E.J.B.; Wood, W.B.

1998-01-01

Training personnel in ionising radiation safety within the Australian Defence Organisation (ADO) requires addressing some unique features of an organisation employing both military and civilian personnel. Activities may include those of a civil nature (such as industrial and medical radiography), specific military requirements (for training and emergency response) and scientific research and development. Some personnel may be assigned to full-time duties associated with radiation. However, most are designated as radiation protection officers as a secondary duty. A further complication is that most military personnel are subjected to postings at regular intervals. The ADO's Directorate of Defence Occupational Health and Safety has established an Ionising Radiation Safety Subcommittee to monitor not only the adequacy of the internal Ionising Radiation Safety Manual but also the training requirements. A Training Course, responding to these requirements, has been developed to emphasize, basic radiation theory and protection, operation of radiation monitors available in the ADO, an understanding of the Ionising Radiation Safety Manual, day-to-day radiation safety in units and establishments, and appropriate responses to radiation accidents and emergencies. In addition, students are briefed on a limited number of peripheral topics and participate in some site visits. Currently, two Courses are held annually, each with about twenty students. Most of the material is presented by ADO personnel with external contractor support. The three Courses held to date have proved successful, both for the students and the ADO generally. To seek national accreditation of the course through the Australian National Training Authority, as a first step, competency standards have been proposed. (authors)
Building patient safety in intensive care nursing : Patient safety culture, team performance and simulation-based training

OpenAIRE

Ballangrud, Randi

2013-01-01

Aim: The overall aim of the thesis was to investigate patient safety culture, team performance and the use of simulation-based team training for building patient safety in intensive care nursing. Methods: Quantitative and qualitative methods were used. In Study I, 220 RNs from ten ICUs responded to a patient safety culture questionnaire analysed with statistics. Studies II-IV were based on an evaluation of a simulation-based team training programme. Studies II-III included 53 RNs from seven I...
Critical safety parameters: The logical approach to refresher training

International Nuclear Information System (INIS)

Johnson, A.R.; Pilkington, W.; Turner, S.

1991-01-01

Nuclear power plant managers must ensure that control room staff are able to perform effectively. This is of particular importance through the longer term after initial authorization. Traditionally refresher training has been based on delivery of fragmented training packages typically derived from the initial authorization training programs. Various approaches have been taken to provide a more integrated refresher training program. However, methods such as job and task analysis and subject matter expert derived training have tended to develop without a focused clear overall training objective. The primary objective of all control room staff training is to ensure a proper and safe response to all plant transients. At the Point Lepreau Nuclear Plant, this has defined the Critical Safety Parameter based refresher training program. The overall objective of the Critical Safety Parameter training program is to ensure that control room staff can monitor and control a discrete set of plant parameters. Maintenance of the selected parameters within defined boundaries assures adequate cooling of the fuel and containment of radioactivity. Control room staff need to be able to reliably respond correctly to plant transients under potentially high stress conditions,. utilizing the essential knowledge and skills to deal with such transients. The inference is that the knowledge and skills must be limited to that which can be reliably recalled. This paper describes how the Point Lepreau Nuclear Plant has developed a refresher training program on the basis of a limited number of Critical Safety Parameters. Through this approach, it has been possible to define the essential set of knowledge and skills which ensures a correct response to plant transients

SAFETY CONSIDERATIONS WITH BLOOD FLOW RESTRICTED RESISTANCE TRAINING

Directory of Open Access Journals (Sweden)

Alan Kacin

2015-11-01

Full Text Available Blood flow restricted resistance (BFRR training with pneumatic tourniquet has been suggested as an alternative for conventional weight training due to the proven benefits for muscle strength and hypertrophy using relatively low resistance, hence reducing the mechanical stress across a joint. As such, it has become an important part of rehabilitation programs used in either injured or operated athletes. Despite a general consensus on effectiveness of BFRR training for muscle conditioning, there are several uncertainties regarding the interplay of various extrinsic and intrinsic factors on its safety and efficiency, which are being reviewed from a clinical perspective. Among extrinsic factors tourniquet cuff pressure, size and shape have been identified as key for safety and efficiency. Among intrinsic factors, limb anthropometrics, patient history and presence of cardiac, vascular, metabolic or peripheral neurologic conditions have been recognized as most important. Though there are a few potential safety concerns connected to BFRR training, the following have been identified as the most probable and health-hazardous: (a mechanical injury to the skin, muscle, and peripheral nerves, (b venous thrombosis due to vascular damage and disturbed hemodynamics and (c augmented arterial blood pressure responses due to combined high body exertion and increased peripheral vascular resistance. Based on reviewed literature and authors’ personal experience with the use of BFRR training in injured athletes, some guidelines for its safe application are outlined. Also, a comprehensive risk assessment tool for screening of subjects prior to their inclusion in a BFRR training program is being introduced.
Training health care professionals in root cause analysis: a cross-sectional study of post-training experiences, benefits and attitudes.

Science.gov (United States)

Bowie, Paul; Skinner, Joe; de Wet, Carl

2013-02-07

Root cause analysis (RCA) originated in the manufacturing engineering sector but has been adapted for routine use in healthcare to investigate patient safety incidents and facilitate organizational learning. Despite the limitations of the RCA evidence base, healthcare authorities and decision makers in NHS Scotland - similar to those internationally - have invested heavily in developing training programmes to build local capacity and capability, and this is a cornerstone of many organizational policies for investigating safety-critical issues. However, to our knowledge there has been no systematic attempt to follow-up and evaluate post-training experiences of RCA-trained staff in Scotland. Given the significant investment in people, time and funding we aimed to capture and learn from the reported experiences, benefits and attitudes of RCA-trained staff and the perceived impact on healthcare systems and safety. We adapted a questionnaire used in a published Australian research study to undertake a cross sectional online survey of health care professionals (e.g. nursing & midwifery, medical doctors and pharmacists) formally trained in RCA by a single territorial health board region in NHS Scotland. A total of 228/469 of invited staff completed the survey (48%). A majority of respondents had yet to participate in a post-training RCA investigation (n=127, 55.7%). Of RCA-experience staff, 71 had assumed a lead investigator role (70.3%) on one or more occasions. A clear majority indicated that their improvement recommendations were generally or partly implemented (82%). The top three barriers to RCA success were cited as: lack of time (54.6%), unwilling colleagues (34%) and inter-professional differences (31%). Differences in agreement levels between RCA-experienced and inexperienced respondents were noted on whether a follow-up session would be beneficial after conducting RCA (65.3% v 39.4%) and if peer feedback on RCA reports would be of educational value (83.2% v 37
Validity of your safety awareness training

CERN Multimedia

DG Unit

2010-01-01

AIS is setting up an automatic e-mail reminder system for safety training. You are invited to forward this message to everyone concerned. Reminder: Please check the validity of your Safety courses Since April 2009 the compulsory basic Safety awareness courses (levels 1, 2 and 3) have been accessible on a "self-service" basis on the web (see CERN Bulletin). Participants are required to pass a test at the end of each course. The test is valid for 3 years so courses must be repeated on a regular basis. A system of automatic e-mail reminders already exists for level 4 courses on SIR and will be extended to the other levels shortly. The number of levels you are required to complete depends on your professional category. Activity Personnel concerned Level 1 Level 2 Level 3 Level 4 Basic safety Basic Safety ...
Ionising radiation safety training in the Australian defence organisation (ADO)

International Nuclear Information System (INIS)

Jenks, G.J.; O'Donovan, E.J.B.; Wood, W.B.

1996-01-01

Full text: Training personnel in ionising radiation safety within the Australian Defence Organisation (ADO) requires addressing some unique features of an organisation employing both military and civilian personnel. Activities may include those of a civil nature (such as industrial and medical radiography), specific military requirements (for training and emergency response) and scientific research and development. Some personnel may be assigned to full-time duties associated with radiation, while others may be designated as radiation protection officers in remote units with few duties to perform in this role. A further complication is that most military personnel are subjected to postings at regular intervals. The ADO's Directorate of Defence Occupational Health and Safety has established an Ionising Radiation Safety Subcommittee to monitor not only the adequacy of the internal Ionising Radiation Safety Manual but also the training requirements. A training course, responding to these requirements, has been developed to emphasise: basic radiation theory and protection; operation of radiation monitors available in the ADO; an understanding of the Safety Manual; day-to-day radiation safety in units and establishments; and appropriate responses to radiation accidents and emergencies. In addition, students are briefed on a limited number of peripheral topics and participate in some site visits. Currently, two Courses are held annually, each with about twenty students. Most of the material is presented by ADO personnel with external contractor support. The three Courses held to date have proved sufficiently successful, both for the students and the ADO generally, to seek national accreditation through the Australian National Training Authority and, as a first step, competency standards have been identified
Occupational safety and health education and training for underserved populations.

Science.gov (United States)

O'Connor, Tom; Flynn, Michael; Weinstock, Deborah; Zanoni, Joseph

2014-01-01

This article presents an analysis of the essential elements of effective occupational safety and health education and training programs targeting underserved communities. While not an exhaustive review of the literature on occupational safety and health training, the paper provides a guide for practitioners and researchers to the key factors they should consider in the design and implementation of training programs for underserved communities. It also addresses issues of evaluation of such programs, with specific emphasis on considerations for programs involving low-literacy and limited-English-speaking workers.
Promoting individual learning for trainees with perceived high helplessness: experiences of a safety training program.

Science.gov (United States)

Kiani, Fariba; Khodabakhsh, Mohamad Reza

2014-01-01

The article arises from a research project investigating the effectiveness of safety training on changing attitudes toward safety issues. Followed by the training intervention was observed that employees' helplessness decreased. The researchers have come to the idea of investigating how safety training can reduce perceived helplessness. Thus, this research examined the effectiveness of safety training on reducing employees' helplessness with attention to the mediating role of attitude toward safety issues. The current study was an experimental study with the control group. A total of 204 (101 experimental group and 103 control group) completed safety attitude questionnaire and perceived helplessness before a safety training course including four 90-min sessions over 4 consecutive days in Esfahan Steel Company in 2012 between October and December. Only members of the experimental group participated in this course. These questionnaires, approximately 30 days later, again were run on members of both groups. Data were analyzed using descriptive indexes, t-, and F-test. RESULTS by comparing the two groups showed that safety training was effective only on individuals with perceived low helplessness (p = 0.02). In individuals with perceived high helplessness, safety training only with changing safety attitudes can reduce the perceived helplessness.
Computerized based training in nuclear safety in the nuclear research center Negev

International Nuclear Information System (INIS)

Ben-Shachar, B.; Krubain, H.; Sberlo, E.

2002-01-01

The Department of Human Resources and Training in the Nuclear Research Center, Negev, in collaboration with the Department of Radiation Protection and Safety used to organize different kinds of training and refresher courses for different aspects of safety in nuclear centers (radiation safety, biological effects of ionizing radiation, industrial safety, fire fighting, emergency procedures, etc.). All radiation workers received a training program of several days in all these subjects, each year. The administrative employees received a shorter training, each second year. The training included only frontal lectures and no quiz or exams were done. No feedback of the employees was received after the training, as well. Recently, a new training program was developed by the NRC-Negev and the CET (Center for Educational Technology), in order to perform the refresher courses. The training includes CBT-s (Computer Based Training), e.g. tutorials and quiz. The tutorial is an interactive course in one subject, including animations, video films and photo stills. The employee gets a simple and clear explanation (including pictures). After each tutorial there is a quiz which includes 7 American style questions. In the following lecture different parts from two of the tutorials used for the refresher courses, will be presented
Criticality safety training at Westinghouse Hanford Company

International Nuclear Information System (INIS)

Rogers, C.A.; Paglieri, J.N.

1983-01-01

In 1972 the Westinghouse Hanford Company (WHC) established a comprehensive program to certify personnel who handle fissionable materials. As the quantity of fissionable material handled at WHC has increased so has the scope of training to assure that all employes perform their work in a safe manner. This paper describes training for personnel engaged in fuel fabrication and handling activities. Most of this training is provided by the Fissionable Material Handlers Certification Program. This program meets or exceeds all DOE requirements for training and has been attended by more than 475 employes. Since the program was instituted, the rate of occurrence of criticality safety limit violations has decreased by 50%
Training health care professionals in root cause analysis: a cross-sectional study of post-training experiences, benefits and attitudes

Directory of Open Access Journals (Sweden)

Bowie Paul

2013-02-01

Full Text Available Abstract Background Root cause analysis (RCA originated in the manufacturing engineering sector but has been adapted for routine use in healthcare to investigate patient safety incidents and facilitate organizational learning. Despite the limitations of the RCA evidence base, healthcare authorities and decision makers in NHS Scotland – similar to those internationally - have invested heavily in developing training programmes to build local capacity and capability, and this is a cornerstone of many organizational policies for investigating safety-critical issues. However, to our knowledge there has been no systematic attempt to follow-up and evaluate post-training experiences of RCA-trained staff in Scotland. Given the significant investment in people, time and funding we aimed to capture and learn from the reported experiences, benefits and attitudes of RCA-trained staff and the perceived impact on healthcare systems and safety. Methods We adapted a questionnaire used in a published Australian research study to undertake a cross sectional online survey of health care professionals (e.g. nursing & midwifery, medical doctors and pharmacists formally trained in RCA by a single territorial health board region in NHS Scotland. Results A total of 228/469 of invited staff completed the survey (48%. A majority of respondents had yet to participate in a post-training RCA investigation (n=127, 55.7%. Of RCA-experience staff, 71 had assumed a lead investigator role (70.3% on one or more occasions. A clear majority indicated that their improvement recommendations were generally or partly implemented (82%. The top three barriers to RCA success were cited as: lack of time (54.6%, unwilling colleagues (34% and inter-professional differences (31%. Differences in agreement levels between RCA-experienced and inexperienced respondents were noted on whether a follow-up session would be beneficial after conducting RCA (65.3% v 39.4% and if peer feedback on RCA
The effect of injection safety training on knowledge and attitude of ...

African Journals Online (AJOL)

Background: Studies have shown poor injection safety practices among health workers in Nigeria and this was adduced to lack of adequate training on injection safety practices. Objective: The study assessed the effect of the training intervention on the knowledge and attitude of primary healthcare workers on injection ...
Evaluation of a Radiation Worker Safety Training Program at a nuclear facility

Energy Technology Data Exchange (ETDEWEB)

Lindsey, J.E.

1993-05-01

A radiation safety course was evaluated using the Kirkpatrick criteria of training evaluation as a guide. Thirty-nine employees were given the two-day training course and were compared with 15 employees in a control group who did not receive the training. Cognitive results show an immediate gain in knowledge, and substantial retention at 6 months. Implications of the results are discussed in terms of applications to current radiation safety training was well as follow-on training research and development requirements.
Evaluation of a Radiation Worker Safety Training Program at a nuclear facility

International Nuclear Information System (INIS)

Lindsey, J.E.

1993-05-01

A radiation safety course was evaluated using the Kirkpatrick criteria of training evaluation as a guide. Thirty-nine employees were given the two-day training course and were compared with 15 employees in a control group who did not receive the training. Cognitive results show an immediate gain in knowledge, and substantial retention at 6 months. Implications of the results are discussed in terms of applications to current radiation safety training was well as follow-on training research and development requirements
Maritime Safety and Security Challenges – 3D Simulation Based Training

OpenAIRE

Christoph Felsenstein; Knud Benedict; Michael Baldauf

2013-01-01

Maritime Safety and Security on board ships very much depends on well trained crews. That is why training and exercising emergency response procedures as well as efficiency in reliable management are extremely necessary. On the other hand research as well as technological development in safety and security, tools and other kinds of technical and organizational systems contribute to further improvement and guarantee high levels of safety and security in maritime transportation. Simulation faci...
Safety Training: scheduled sessions in September and October 2011

CERN Multimedia

DGS Unit

2011-01-01

The following training courses are scheduled in September – October. You can find the full Safety Training programme on the Safety Training online catalogue. If you are interested in attending any of the below courses, please talk to your supervisor, then apply electronically via EDH from the course description pages, by clicking on SIGN-UP. Registration for all courses is always open – sessions for the less-requested courses are organized on a demand-basis only. Depending on the demand, a session will be organised later in the year. Alphabetical order (original course titles are maintained) Chemical Safety – Introduction 11-OCT-11, 9.00 – 11.30, in English Conduite de chariots élévateurs 17-OCT-11 to 18-OCT-11, 8.00 – 17.30, in French * Ergonomics - Applying ergonomic principles in the workplace 15-SEP-11, 9.00 – 12.30, in French 15-SEP-11, 14.00 – 17.30, in English Habilitation électrique : Personne...
Training of instructors on nuclear safety in Asian Countries

International Nuclear Information System (INIS)

Ikuta, Yuko; Shitomi, Hajimu; Saeki, Masakatsu

2002-01-01

Japan Atomic Energy Research Institute (JAERI)is conducting the international cooperation's of training of the foreign instructors and sending the Japanese teacher to the countries of Indonesia, Thailand (both from 1996) and Vietnam (2000). The training is performed in the JAERI for the future instructors of the concerned country for the period of essentially 2 months and is mainly on nuclear safety principles and safety handling of unsealed radioactive sources. Until 2001, 22 instructors from those countries have been trained in 142 courses. The sent Japanese teacher together with the trained instructor conduct the education of mainly radiation protection and measurement for personnel in ETC of BATAN (Education and Training Center, Indonesia atomic energy agency), radiation protection and atomic energy technology/application in OAEP (Office of Atomic Energy for Peace, Thailand) and the same subjects as BATAN in VAEC (Vietnam Atomic Energy Commission). Instruments for radiation measurement are essentially from Japan. This JAERI international cooperation will be open to other Asian countries. (K.H.)
Training of instructors on nuclear safety in Asian Countries

Energy Technology Data Exchange (ETDEWEB)

Ikuta, Yuko; Shitomi, Hajimu; Saeki, Masakatsu [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Nuclear Technology and Education Center

2002-11-01

Japan Atomic Energy Research Institute (JAERI)is conducting the international cooperation's of training of the foreign instructors and sending the Japanese teacher to the countries of Indonesia, Thailand (both from 1996) and Vietnam (2000). The training is performed in the JAERI for the future instructors of the concerned country for the period of essentially 2 months and is mainly on nuclear safety principles and safety handling of unsealed radioactive sources. Until 2001, 22 instructors from those countries have been trained in 142 courses. The sent Japanese teacher together with the trained instructor conduct the education of mainly radiation protection and measurement for personnel in ETC of BATAN (Education and Training Center, Indonesia atomic energy agency), radiation protection and atomic energy technology/application in OAEP (Office of Atomic Energy for Peace, Thailand) and the same subjects as BATAN in VAEC (Vietnam Atomic Energy Commission). Instruments for radiation measurement are essentially from Japan. This JAERI international cooperation will be open to other Asian countries. (K.H.)
Radiation protection training of radiation safety officers in Finland in 2008

International Nuclear Information System (INIS)

Havukainen, R.; Bly, R.; Markkanen, M.

2009-11-01

The Radiation and Nuclear Safety Authority (STUK) carried out a survey on the radiation protection training of radiation safety officers (RSO) in Finland in 2008. The aim of the survey was to obtain information on the conformity and uniformity of the training provided in different training organisations. A previous survey concerning radiation protection training was carried out in 2003. That survey determined the training needs of radiation users and radiation safety officers as well the radiation protection training included in vocational training and supplementary training. This report presents the execution and results of the survey in 2008. According to the responses, the total amount of RSO training fulfilled the requirements presented in Guide ST 1.8 in the most fields of competence. The emphasis of the RSO training differed between organisations, even for training in the same field of competence. Certain issues in Guide ST 1.8 were dealt quite superficially or even not at all in some training programmes. In some fields of competence, certain matters were entirely left to individual study. No practical training with radiation equipment or sources was included in the RSO training programme of some organisations. Practical training also varied considerably between organisations, even within the same field of competence. The duties in the use of radiation were often considered as practical training with radiation equipment and sources. Practical training from the point of view of a radiation safety officer was brought up in the responses of only one organisation. The number of questions and criteria for passing RSO exams also varied between organisations. Trainers who provided RSO training for the use of radiation in health care sectors had reached a higher vocational training level and received more supplementary training in radiation protection in the previous 5 years than trainers who provided RSO training for the use of radiation in industry, research, and
Demonstration of the LHC Safety Training Tunnel Mock-Up

CERN Multimedia

Brice, Maximilien

2014-01-01

Members of CERN's management visit the LHC tunnel mock-up at the Safety Training Centre on the Prévessin site. The facility is used to train personnel in emergency responses including the use of masks and safe evacuation.
[Evaluating training programs on occupational health and safety: questionnaire development].

Science.gov (United States)

Zhou, Xiao-Yan; Wang, Zhi-Ming; Wang, Mian-Zhen

2006-03-01

To develop a questionnaire to evaluate the quality of training programs on occupational health and safety. A questionnaire comprising five subscales and 21 items was developed. The reliability and validity of the questionnaire was tested. Final validation of the questionnaire was undertaken in 700 workers in an oil refining company. The Cronbach's alpha coefficients of the five subscales ranged from 0.6194 to 0.6611. The subscale-scale Pearson correlation coefficients ranged from 0.568 to 0.834 . The theta coefficients of the five subscales were greater than 0.7. The factor loadings of the five subscales in the principal component analysis ranged from 0.731 to 0.855. Use of the questionnaire in the 700 workers produced a good discriminability, with excellent, good, fair and poor comprising 22.2%, 31.2%, 32.4% and 14.1 respectively. Given the fact that 18.7% of workers had never been trained and 29.7% of workers got one-off training only, the training program scored an average of 57.2. The questionnaire is suitable to be used in evaluating the quality of training programs on occupational health and safety. The oil refining company needs to improve training for their workers on occupational health and safety.
Plutonium safety training course

International Nuclear Information System (INIS)

Moe, H.J.

1976-03-01

This course seeks to achieve two objectives: to provide initial safety training for people just beginning work with plutonium, and to serve as a review and reference source for those already engaged in such work. Numerous references have been included to provide information sources for those wishing to pursue certain topics more fully. The first part of the course content deals with the general safety approach used in dealing with hazardous materials. Following is a discussion of the four properties of plutonium that lead to potential hazards: radioactivity, toxicity, nuclear properties, and spontaneous ignition. Next, the various hazards arising from these properties are treated. The relative hazards of both internal and external radiation sources are discussed, as well as the specific hazards when plutonium is the source. Similarly, the general hazards involved in a criticality, fire, or explosion are treated. Comments are made concerning the specific hazards when plutonium is involved. A brief summary comparison between the hazards of the transplutonium nuclides relative to 239 Pu follows. The final portion deals with control procedures with respect to contamination, internal and external exposure, nuclear safety, and fire protection. The philosophy and approach to emergency planning are also discussed

General Employee Training Live, Course 15503

Energy Technology Data Exchange (ETDEWEB)

Gabel, Daniel Glen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hughes, Heather [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-08-25

This training at Los Alamos National Laboratory contains the following sections: Introduction to the Laboratory, Institutional Quality Assurance, Facilities, Policies, Procedures, and Other Requirements, Safety Expectations, Worker Protection: Occupational Safety and Health, Industrial Hygiene and Safety, Lockout/Tagout, General Employee Radiological Training, Fire Protection, Security, Emergency Operations, Occupational Health, and Environment.
Classroom instruction versus roadside training in traffic safety education

NARCIS (Netherlands)

van Schagen, I; Rothengatter, J.A.

1997-01-01

This study compares the effectiveness of different approaches to training complex cognitive and psychomotor skills within the framework of road safety education for primary school children. A method involving roadside behavioral training, a classroom instruction method and a method combining these
Training Requirements in OSHA Standards and Training Guidelines. Revised.

Science.gov (United States)

Occupational Safety and Health Administration, Washington, DC.

This guide provides an overview of Occupational Safety and Health Act (OSHA) standards and training guidelines for various industries. The first section introduces the concept of voluntary training guidelines, explaining that the guidelines are designed to help employers determine whether a worksite problem can be solved by training, what training…
Design of a Construction Safety Training System using Contextual Design Methodology

OpenAIRE

Baldev, Darshan H.

2006-01-01

In the U.S., the majority of construction companies are small companies with 10 or fewer employees (BLS, 2004). The fatality rate in the construction industry is high, indicating a need for implementing safety training to a greater extent. This research addresses two main goals: to make recommendations and design a safety training system for small construction companies, and to use Contextual Design to design the training system. Contextual Design was developed by Holtzblatt (Beyer and Holtzb...
Multidisciplinary training program to create new breed of radiation monitor: the health and safety technician

International Nuclear Information System (INIS)

Vance, W.F.

1979-01-01

A multidiscipline training program established to create a new monitor, theHealth and Safety Technician, is described. The training program includes instruction in fire safety, explosives safety, industrial hygiene, industrial safety, health physics, and general safety practices
Education and Training in Radiation, Transport and Waste Safety Newsletter, No. 2c, May 2013

International Nuclear Information System (INIS)

2013-05-01

The IAEA Strategic Approach to Education and Training in Radiation, Transport and Waste Safety (2011-2020) provides a framework for establishing a sustainable education and training infrastructure in Member States that addresses national needs for building and maintaining competence in radiation, transport and waste safety that is consistent with IAEA Safety Standards. For this purpose, IAEA's General Conference has encouraged Member States to develop a national strategy for education and training, underlining the fundamental importance of sustainable programmes for building competence in radiation, transport and waste safety, as a key component of safety infrastructure. Furthermore Member States that receive assistance from IAEA are obliged to apply IAEA Safety Standards which require, inter alia, governments to establish a national policy and strategy for safety, including provisions for acquiring and maintaining the necessary competence nationally for ensuring safety. IAEA's Division of Radiation, Transport and Waste Safety is assisting Member States to develop their own national strategies in Europe via the Regional Project RER/9/109 on ''Strengthening Education and training Infrastructure, and Building Competence in Radiation Safety'', which includes, inter alia, Regional Workshops on National Strategies for education and training in radiation transport and waste safety. IAEA's Regional Training Centres (RTCs) in Greece and Belarus are key partners in the European region.
Education and Training in Radiation, Transport and Waste Safety Newsletter, No. 2d, June 2013

International Nuclear Information System (INIS)

2013-06-01

The IAEA Strategic Approach to Education and Training in Radiation, Transport and Waste Safety (2011-2020) provides a framework for establishing a sustainable education and training infrastructure in Member States that addresses national needs for building and maintaining competence in radiation, transport and waste safety that is consistent with IAEA Safety Standards. For this purpose, IAEA's General Conference has encouraged Member States to develop a national strategy for education and training, underlining the fundamental importance of sustainable programmes for building competence in radiation, transport and waste safety, as a key component of safety infrastructure. Furthermore Member States that receive assistance from IAEA are obliged to apply IAEA Safety Standards which require, inter alia, governments to establish a national policy and strategy for safety, including provisions for acquiring and maintaining the necessary competence nationally for ensuring safety. IAEA's Division of Radiation, Transport and Waste Safety is assisting Member States to develop their own national strategies in Latin America via the Regional Project RLA/9/070 on ''Strengthening Education and training Infrastructure, and Building Competence in Radiation Safety'', which includes, inter alia, Regional Workshops on National Strategies for education and training in radiation transport and waste safety. IAEA's Regional Training Centres (RTCs) in Argentina and Brazil are key partners in the Latin-American region.
IAEA education and training programme in nuclear safety

International Nuclear Information System (INIS)

Bastos, J.L.F.; Lederman, L.

2003-01-01

This paper presents the IAEA education and training (E and T) programme in nuclear safety. A strategic planning for the programme implementation is described in terms of objectives, outputs and activities. A framework based on areas of competency and the level of depth of the training is presented as well as the main achievements to date. (author)
Nuclear criticality safety: 3-day training course

International Nuclear Information System (INIS)

Schlesser, J.A.

1993-06-01

The open-quotes 3-Day Training Courseclose quotes is an intensive course in criticality safety consisting of lectures and laboratory sessions, including active student participation in actual critical experiments, a visit to a plutonium processing facility, and in-depth discussions on safety philosophy. The program is directed toward personnel who currently have criticality safety responsibilities in the capacity of supervisory staff and/or line management. This compilation of notes is presented as a source reference for the criticality safety course. It represents the contributions of many people, particularly Tom McLaughlin, the course's primary instructor. It should be noted that when chapters were extracted, an attempt was made to maintain footnotes and references as originally written. Photographs and illustrations are numbered sequentially
Education and Training in Radiation, Transport and Waste Safety Newsletter, No. 2b, May 2013

International Nuclear Information System (INIS)

2013-05-01

The IAEA Strategic Approach to Education and Training in Radiation, Transport and Waste Safety (2011-2020) provides a framework for establishing a sustainable education and training infrastructure in Member States that addresses national needs for building and maintaining competence in radiation, transport and waste safety that is consistent with IAEA Safety Standards. For this purpose, IAEA's General Conference has encouraged Member States to develop a national strategy for education and training, underlining the fundamental importance of sustainable programmes for building competence in radiation, transport and waste safety, as a key component of safety infrastructure. Furthermore Member States that receive assistance from IAEA are obliged to apply IAEA Safety Standards which require, inter alia, governments to establish a national policy and strategy for safety, including provisions for acquiring and maintaining the necessary competence nationally for ensuring safety. IAEA's Division of Radiation, Transport and Waste Safety is assisting Member States to develop their own national strategies in Asia and the Pacific via the Regional project RAS/9/066 on ''Strengthening Education and training Infrastructure, and Building Competence in Radiation Safety'', which includes, inter alia, Regional Workshops on National Strategies for education and training in radiation transport and waste safety. IAEA's Regional Training Centres (RTCs) in Malaysia and Syrian Arabic Republic are key partners in the Asian and the Pacific region.
Education and Training in Radiation, Transport and Waste Safety Newsletter, No. 2a, May 2013

International Nuclear Information System (INIS)

2013-05-01

The IAEA Strategic Approach to Education and Training in Radiation, Transport and Waste Safety (2011-2020) provides a framework for establishing a sustainable education and training infrastructure in Member States that addresses national needs for building and maintaining competence in radiation, transport and waste safety that is consistent with IAEA Safety Standards. For this purpose, IAEA's General Conference has encouraged Member States to develop a national strategy for education and training, underlining the fundamental importance of sustainable programmes for building competence in radiation, transport and waste safety, as a key component of safety infrastructure. Furthermore Member States that receive assistance from IAEA are obliged to apply IAEA Safety Standards which require, inter alia, governments to establish a national policy and strategy for safety, including provisions for acquiring and maintaining the necessary competence nationally for ensuring safety. IAEA's Division of Radiation, Transport and Waste Safety is assisting Member States to develop their own national strategies in Africa via the Regional project RAF/9/04 on ''Strengthening Education and training Infrastructure, and Building Competence in Radiation Safety'', which includes, inter alia, Regional Workshops on National Strategies for education and training in radiation transport and waste safety. AFRA Regional Designated Centres, in Algeria, Ghana and Morocco, equivalent to the IAEA's Regional Training Centres (RTCs) present in all the other regions, are key partners in the African region.
The effect of safety training involving non-destructive testing among students at specialized vocational high schools

Energy Technology Data Exchange (ETDEWEB)

Lim Young Khi [Dept. of Radiological Science, Gachon University, Inchon (Korea, Republic of); Han, Eun Ok; Choi, Yoon Seok [Dept. of Education amd Research, Korea Academy of Nuclear Safety, Seoul (Korea, Republic of)

2017-06-15

By examining the safety issues involved in on-site training sessions conducted at specialized vocational high schools, and by analyzing the effects of non-destructive testing (NDT) safety training, this study aims to contribute to ensuring the general safety of high school students. Students who expressed an interest in participation were surveyed regarding current NDT training practices, as well as NDT safety training. A total of 361 students from 4 schools participated in this study; 37.7% (136 students) were from the Seoul metropolitan area and 62.3% (225 students) were from other areas. Of the respondents, 2.2% (8 students) reported having engaged in NDT. As a result of safety training, statistically significant improvements were observed in most areas, except for individuals with previous NDT experience. The areas of improvement included safety awareness, acquisition of knowledge, subjective knowledge levels, objective knowledge levels, and adjustments to existing personal attitudes. Even at absolutely necessary observation-only training sessions, it is crucial that sufficient safety training and additional safety measures be adequately provided.
The effect of safety training involving non-destructive testing among students at specialized vocational high schools

International Nuclear Information System (INIS)

Lim Young Khi; Han, Eun Ok; Choi, Yoon Seok

2017-01-01

By examining the safety issues involved in on-site training sessions conducted at specialized vocational high schools, and by analyzing the effects of non-destructive testing (NDT) safety training, this study aims to contribute to ensuring the general safety of high school students. Students who expressed an interest in participation were surveyed regarding current NDT training practices, as well as NDT safety training. A total of 361 students from 4 schools participated in this study; 37.7% (136 students) were from the Seoul metropolitan area and 62.3% (225 students) were from other areas. Of the respondents, 2.2% (8 students) reported having engaged in NDT. As a result of safety training, statistically significant improvements were observed in most areas, except for individuals with previous NDT experience. The areas of improvement included safety awareness, acquisition of knowledge, subjective knowledge levels, objective knowledge levels, and adjustments to existing personal attitudes. Even at absolutely necessary observation-only training sessions, it is crucial that sufficient safety training and additional safety measures be adequately provided
Safety net : train safely, profitably, and stay out of jail

Energy Technology Data Exchange (ETDEWEB)

Byfield, M.

2005-08-01

This article discussed the benefits of new Web-based training and development services provided by AMEC Training and Development Services. Various Alberta safety regulations were also reviewed, and it was noted that the upstream oil and gas sector have already begun building up strong safety programs. Companies are now increasingly using computer-based training for employees to improve workplace safety. Web-based courses ensure that the subject material is understood by students. In addition, Web-based materials can be economically delivered to field personnel. The learning process can be tracked and recorded in the event that misfortune should occur in the future. Various e-learning packages were evaluated, including Gemini's SWIFT e-learning package. However, the degree to which the Web can replace classroom instruction remains controversial. Typically, modules of a course focus initially on a foundation description of the plant or process, then progress to operating procedures and troubleshooting lessons. Moving diagrams can be programmed using Macro-media Flash, and can be used to portray moving mechanical parts and chemical changes that would normally not be visible to an operator even when standing beside the equipment. It was concluded that with hundreds of workers to train, often on a just-in-time basis, training services that include Web-based instruction are often the most cost-effective and efficient means of training staff. 5 figs.
Nuclear Regulatory Systems in Africa: Improving Safety and Security Culture Through Education and Training

International Nuclear Information System (INIS)

Kazadi Kabuya, F.

2016-01-01

The purpose of this paper is to address the important issue of supporting safety and security culture through an educational and training course program designed both for regulatory staff and licensees. Enhancing the safety and security of nuclear facilities may involve assessing the overall effectiveness of the organization's safety culture. Safety Culture implies steps such as identifying and targeting areas requiring attention, putting emphasis on organizational strengths and weaknesses, human attitudes and behaviours that may positively impact an organization's safety culture, resulting in improving workplace safety and developing and maintaining a high level of awareness within these facilities. Following the terrorist attacks of September 11, 2001, international efforts were made towards achieving such goals. This was realized through meetings, summits and training courses events, with main aim to enhance security at facilities whose activities, if attacked, could impact public health and safety. During regulatory oversight inspections undertaken on some licensee's premises, violations of security requirements were identified. They mostly involved inadequate management oversight of security, lack of a questioning attitude, complacency and mostly inadequate training in both security and safety issues. Using training and education approach as a support to raise awareness on safety and security issues in the framework of improving safety and security culture, a tentative training program in nuclear and radiological safety was started in 2002 with the main aim of vulgarizing the regulatory framework. Real first needs for a training course program were identified among radiographers and radiologists with established working experience but with limited knowledge in radiation safety. In the field of industrial uses of radiation the triggering events for introducing and implementing a training program were: the loss of a radioactive source in a mining
Availabilities in the June Safety Training sessions

CERN Multimedia

2010-01-01

A few places are still available on the safety courses mentioned below. Please consult the Safety training catalogue to obtain all the latest information and to register. Clearance for work with electrical equipment ("Habilitation électrique") for non-electricians (classroom-based course), 9 June, in French, 8 hours from 9.00 am to 5.30 pm (10 places available) Safety in Cryogenics level 1, 14 June, in English, 3 hours from, 9.00 am to 12 noon (5 places available) Lift-truck operation ("Conduite de chariots élévateurs"), 24-25 June, in French, 2 days from 8.00 am to 5.30 pm (3 places available).
Safety Training: places available in July - August 2013

CERN Multimedia

Isabelle CUSATO, HSE Unit

2013-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. July - August 2013 (alphabetical order) Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (Cherry-picker training) 01-JUL-13 to 02-JUL-13, 8.30 – 17.30, in French First-Aiders – Basic Course 31-JUL-13, 8.15 – 17.30, in English Habilitation électrique personnel électricien basse tension (electrical habilitation for low voltage) 01-JUL-13 to 03-JUL-13, 9.00 – 17.30, in French (with handouts in English) Pontier-élingueur (Crane training) 03-JUL-13 to 04-JUL-13, 8.30 – 17.30, in French (with handouts in English) Radiological Protection - Controlled Radiation Area - Course A for CERN employees and CERN associates 11-JUL-13, 8.30 – 17.00, in English 11-JUL-13, 8.30 – 17.00, in French 12-JUL-13, 8.30 – 17.00, i...
Safety Training: places available in July - August 2013

CERN Multimedia

Isabelle CUSATO, HSE Unit

2013-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. July - August 2013 (alphabetical order) Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (Cherry-picker training) 01-JUL-13 to 02-JUL-13, 8.30 – 17.30, in French First-Aiders – Basic Course 31-JUL-13, 8.15 – 17.30, in English Habilitation électrique personnel électricien basse tension (electrical habilitation for low voltage) 01-JUL-13 to 03-JUL-13, 9.00 – 17.30, in French (with handouts in English) Pontier-élingueur (Crane training) 03-JUL-13 to 04-JUL-13, 8.30 – 17.30, in French (with handouts in English) Radiological Protection - Controlled Radiation Area - Course A for CERN employees and CERN associates 11-JUL-13, 8.30 – 17.00, in English 11-JUL-13, 8.30 – 17.00, in French 12-JUL-13, 8.30 – 17.00, in...
Safety Training: places available in June

CERN Multimedia

GS Department

2012-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. June 2012 (alphabetical order) Champs magnétiques 08-JUN-12, 09h30 – 12h00, en anglais Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (Cherry-picker training) 11-JUN-12 to 12-JUN-12, 08.00 – 17.00, in French (with possibility to have the handouts in English) Ergonomics - Applying ergonomic principles in the workplace 14-JUN-12, 09.00 – 12.00, in French First Aiders - Basic Course 06-JUN-12 to 07-JUN-12, 08.00 – 17.00, in French (total : 1.5 days) First Aiders - Refresher Course 07-JUN-12, 13.00 – 17.00, in French 12-JUN-12, 08.00 – 12.00, in English 12-JUN-12, 13.00 – 17.00, in English Habilitation ATEX niveau 2 (ATEX certification – level 2) 07-JUN-12 to 08-JUN-12, 9.00 – 17.30, in French Habilitation &eacut...
Revamping occupational safety and health training: Integrating andragogical principles for the adult learner

Directory of Open Access Journals (Sweden)

Alex Albert

2013-09-01

Full Text Available Despite attempts to improve safety performance, the construction industry continues to account for a disproportionate rate of injuries. A large proportion of these injuries occur because workers are unable to recognize and respond to hazards in dynamic and unpredictable environments. Unrecognized hazards expose workers to unanticipated risks and can lead to catastrophic accidents. In order to enhance hazard recognition skills, employers often put new and experienced workers through formal hazard recognition training programs. Unfortunately, current training programs primarily rely on instructor-centric pedagogical approaches, which are insensitive to the adult learning process. In order to ensure effective adult learning, training programs must integrate learner-centric andragogical principles to improve engagement and retention in adult trainees. This paper aims to discuss training program elements that can potentially accelerate the adult learning process while improving safety knowledge retention. To this end, the researchers reviewed relevant literature on the cognitive processes of adult learning, essential components of effectual training programs and developed a reliable framework for the training and transfer of safety knowledge. A case example of successfully using the framework is also presented. The results of the study will provide safety trainers and construction professionals with valuable information on developing effective hazard recognition and receptor training programs, with the goal of improving construction safety performance.

49 CFR 214.331 - Definite train location.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Definite train location. 214.331 Section 214.331... location. A roadway worker may establish on-track safety by using definite train location only where... may only use definite train location to establish on-track safety at points where such procedures were...
NPP safety and personnel training. XII International conference. Abstracts. Volume 2

International Nuclear Information System (INIS)

2011-01-01

The XII International conference NPP Safety and Personnel Training took place in Obninsk, October 4-7 2011. The problems of personnel training for nuclear industry are discussed. The innovation nuclear systems and fuel cycle are considered. The much attention has been given to NPP radiation safety and radioecology issues. The recent high-speed computation and simulation methods used in reactor technology are presented [ru
NPP safety and personnel training. XII International conference. Abstracts

International Nuclear Information System (INIS)

2011-01-01

The 12th International conference NPP Safety and Personnel Training took place in Obninsk, October 4-7, 2011. The issues of nuclear technologies safety are considered.The problems of life-cycle management of nuclear facilities are discussed. The criteria of assessment of physical protection systems of nuclear facilities are presented [ru
Educating Immigrant Hispanic Foodservice Workers about Food Safety Using Visual-Based Training

Science.gov (United States)

Rajagopal, Lakshman

2013-01-01

Providing food safety training to a diverse workforce brings with it opportunities and challenges that must be addressed. The study reported here provides evidence for benefits of using visual-based tools for food safety training when educating immigrant, Hispanic foodservice workers with no or minimal English language skills. Using visual tools…
Five Years of a Computer Based New Training Program in Safety and Radiation Protection

International Nuclear Information System (INIS)

Ben-Shachar, B.; Tshuva, M.; Fitussi, I.; Ankri, D.

2004-01-01

One of the main goals of the Department of Human Resources Development is to give employees fundamental knowledge, refreshing know-how and increasing safety awareness. In this regard safety deals with risks in operating nuclear facilities, including radiation, industrial risks and fire. Israeli Work Supervision (informing and training employees, 1992) (1) and work safety regulations (industrial safety and health for ionization radiation employees) state the need for training by the employer at least once a year. The employer also must take means to verify that the employees actually understand what they were trained for
77 FR 27776 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2012-05-11

... Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH) In... Services Office, CDC, pursuant to Public Law 92-463. Purpose: The Safety and Occupational Health Study... standard grants review and funding cycles pertaining to research issues in occupational safety and health...
76 FR 18220 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2011-04-01

... Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH) In... Services Office, CDC, pursuant to Public Law 92-463. Purpose: The Safety and Occupational Health Study... standard grants review and funding cycles pertaining to research issues in occupational safety and health...
Systematic approach to training for competence building in radiation safety

International Nuclear Information System (INIS)

Asiamah, S.D.; Schandorf, C.; Darko, E.O.

2003-01-01

Competence building involves four main attributes, namely, knowledge, skills, operating experience and attitude to radiation safety. These multi-attribute requirements demand a systematic approach to education and training of regulatory staff, licensees/registrants and service providers to ensure commensurate competence in performance of responsibilities and duties to specified standards. In order to address issues of competencies required in radiation safety a national programme for qualification and certification has been initiated for regulatory staff, operators, radiation safety officers and qualified experts. Since the inception of this programme in 1993, 40 training events have been organized involving 423 individuals. This programme is at various levels of implementation due to financial and human resource constraints. A department for Human Resource Development and Research was established in 2000 to enhance and ensure the sustainability of the effectiveness of capacity building in radiation safety. (author)
Resistance training among young athletes: safety, efficacy and injury prevention effects.

Science.gov (United States)

Faigenbaum, A D; Myer, G D

2010-01-01

A literature review was employed to evaluate the current epidemiology of injury related to the safety and efficacy of youth resistance training. Several case study reports and retrospective questionnaires regarding resistance exercise and the competitive sports of weightlifting and powerlifting reveal that injuries have occurred in young lifters, although a majority can be classified as accidental. Lack of qualified instruction that underlies poor exercise technique and inappropriate training loads could explain, at least partly, some of the reported injuries. Current research indicates that resistance training can be a safe, effective and worthwhile activity for children and adolescents provided that qualified professionals supervise all training sessions and provide age-appropriate instruction on proper lifting procedures and safe training guidelines. Regular participation in a multifaceted resistance training programme that begins during the preseason and includes instruction on movement biomechanics may reduce the risk of sports-related injuries in young athletes. Strategies for enhancing the safety of youth resistance training are discussed.
Effective Learning on the Web Using the Internet for Safety Training

International Nuclear Information System (INIS)

Bar-Noy, T.; Sugarman, H.

2004-01-01

A previous article, Nuclear Physics Education on the web, concentrated on identifying some of the many resources for information on nuclear physics education. This article will concentrate on utilizing these resources in order to create effective learning environments. As more and more learning and training moves from the traditional face to face classroom to the internet, it is becoming increasingly important to improve the quality of online courses. In the examples given here, we concentrate on the area of radiation safety. The reason for this is that government regulations mandate that every worker who comes in contact with radioactive (and other hazardous) materials must undergo safety training before he begins work and at regular intervals thereafter. Unfortunately this training often consists of boring lectures and reading materials, with no interactivity and little or no evaluation following the training. Because of the importance of safety training, it is imperative to improve the quality of this training by creating effective learning environments. One way to do this is to create online courses via the internet. Aside from the fact that use of the internet vastly expands the resources available to the student and instructor, giving a course via the web is much more efficient in terms of time and expense
Non-technical skills training to enhance patient safety.

Science.gov (United States)

Gordon, Morris

2013-06-01

Patient safety is an increasingly recognised issue in health care. Systems-based and organisational methods of quality improvement, as well as education focusing on key clinical areas, are common, but there are few reports of educational interventions that focus on non-technical skills to address human factor sources of error. A flexible model for non-technical skills training for health care professionals has been designed based on the best available evidence, and with sound theoretical foundations. Educational sessions to improve non-technical skills in health care have been described before. The descriptions lack the details to allow educators to replicate and innovate further. A non-technical skills training course that can be delivered as either a half- or full-day intervention has been designed and delivered to a number of mixed groups of undergraduate medical students and doctors in postgraduate training. Participant satisfaction has been high and patient safety attitudes have improved post-intervention. This non-technical skills educational intervention has been built on a sound evidence base, and is described so as to facilitate replication and dissemination. With the key themes laid out, clinical educators will be able to build interventions focused on numerous clinical issues that pay attention to human factor contributors to safety. © 2013 John Wiley & Sons Ltd.
The effects of Crew Resource Management (CRM) training on flight attendants' safety attitudes.

Science.gov (United States)

Ford, Jane; Henderson, Robert; O'Hare, David

2014-02-01

A number of well-known incidents and accidents had led the aviation industry to introduce Crew Resource Management (CRM) training designed specifically for flight attendants, and joint (pilot and flight attendant) CRM training as a way to improve teamwork and communication. The development of these new CRM training programs during the 1990s highlighted the growing need for programs to be evaluated using research tools that had been validated for the flight attendant population. The FSAQ (Flight Safety Attitudes Questionnaire-Flight Attendants) was designed specifically to obtain safety attitude data from flight attendants working for an Asia-Pacific airline. Flight attendants volunteered to participate in a study before receiving CRM training (N=563) and again (N=526) after CRM training. Almost half (13) of the items from the 36-item FSAQ showed highly significant changes following CRM training. Years of experience, crew position, seniority, leadership roles, flight attendant crew size, and length of route flown were all predictive of safety attitudes. CRM training for flight attendants is a valuable tool for increasing positive teamwork behaviors between the flight attendant and pilot sub-groups. Joint training sessions, where flight attendants and pilots work together to find solutions to in-flight emergency scenarios, provide a particularly useful strategy in breaking down communication barriers between the two sub-groups. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.
Building a culture of safety through team training and engagement.

Science.gov (United States)

Thomas, Lily; Galla, Catherine

2013-05-01

Medical errors continue to occur despite multiple strategies devised for their prevention. Although many safety initiatives lead to improvement, they are often short lived and unsustainable. Our goal was to build a culture of patient safety within a structure that optimised teamwork and ongoing engagement of the healthcare team. Teamwork impacts the effectiveness of care, patient safety and clinical outcomes, and team training has been identified as a strategy for enhancing teamwork, reducing medical errors and building a culture of safety in healthcare. Therefore, we implemented Team Strategies and Tools to Enhance Performance and Patient Safety (TeamSTEPPS), an evidence-based framework which was used for team training to create transformational and/or incremental changes; facilitating transformation of organisational culture, or solving specific problems. To date, TeamSTEPPS (TS) has been implemented in 14 hospitals, two Long Term Care Facilities, and outpatient areas across the North Shore LIJ Health System. 32 150 members of the healthcare team have been trained. TeamSTEPPS was piloted at a community hospital within the framework of the health system's organisational care delivery model, the Collaborative Care Model to facilitate sustainment. AHRQ's Hospital Survey on Patient Safety Culture, (HSOPSC), was administered before and after implementation of TeamSTEPPS, comparing the perception of patient safety by the heathcare team. Pilot hospital results of HSOPSC show significant improvement from 2007 (pre-TeamSTEPPS) to 2010. System-wide results of HSOPSC show similar trends to those seen in the pilot hospital. Valuable lessons for organisational success from the pilot hospital enabled rapid spread of TeamSTEPPS across the rest of the health system.
Safety Training: places available in March

CERN Multimedia

HSE Unit

2012-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. MARCH 2012 (alphabetical order, titles of courses in the original language) Echafaudages, réception et conformité (Scaffolding, reception and conformity): From 29-FEB-12 to 02-MAR-12, 09.00 – 17.30, in French (in Domarin, dept. 38) Laser Users : 09-MAR-12, 09.00 – 12.30, in English Self-Rescue Mask training : 08-MAR-12, 08.30 – 10.00, in French 08-MAR-12, 10.30 – 12.00, in English 13-MAR-12, 08.30 – 10.00, in French 13-MAR-12, 10.30 – 12.00, in English 20-MAR-12, 08.30 – 10.00, in French 20-MAR-12, 10.30 – 12.00, in English 22-MAR-12, 08.30 – 10.00, in French 22-MAR-12, 10.30 – 12.00, , in English 27-MAR-12, 08.30 – 10.00, in French 27-MAR-12, 10.30 – 12.00, in English Habilitation électrique pour Electriciens en b...
National training course on radiation safety, Its insertion in the cuban system of education and training

International Nuclear Information System (INIS)

Cornejo Diaz, Netor; Hernadez Saiz, Alejandro; Calli Fernadez, Ernesto; Perez Reyes, Yolanda

2005-01-01

The Center for Radiation Protection and Hygiene has been organizing, since more than ten years, the national training course on Radiation Safety, taking into account the particular needs of the Country in this area. The curriculum of the course, after some years of improvements, is showed and some aspects related to its design and insertion in the national system of education and training in Radiation Safety are discussed. The maintenance of an updated database of participants has demonstrated to be a very useful tool for dissemination of knowledge in Radiation Safety and for a continuously improvement of the imparted courses and offered services. The importance of the participation of the Regulatory Authority in the Course, from its organization phase, is also stressed
Multimedia for occupational safety and health training: a pilot study examining a multimedia learning theory.

Science.gov (United States)

Wallen, Erik S; Mulloy, Karen B

2006-10-01

Occupational diseases are a significant problem affecting public health. Safety training is an important method of preventing occupational illness. Training is increasingly being delivered by computer although theories of learning from computer-based multimedia have been tested almost entirely on college students. This study was designed to determine whether these theories might also be applied to safety training applications for working adults. Participants viewed either computer-based multimedia respirator use training with concurrent narration, narration prior to the animation, or unrelated safety training. Participants then took a five-item transfer test which measured their ability to use their knowledge in new and creative ways. Participants who viewed the computer-based multimedia trainings both did significantly better than the control group on the transfer test. The results of this pilot study suggest that design guidelines developed for younger learners may be effective for training workers in occupational safety and health although more investigation is needed.
A framework for the development of patient safety education and training guidelines.

Science.gov (United States)

Zikos, Dimitrios; Diomidous, Marianna; Mantas, John

2010-01-01

Patient Safety (PS) is a major concern that involves a wide range of roles in healthcare, including those who are directly and indirectly involved, and patients as well. In order to succeed into developing a safety culture among healthcare providers, carers and patients, there should be given great attention into building appropriate education and training tools, especially addressing those who plan patient safety activities. The framework described in this policy paper is based on the results of the European Network for Patient Safety (EUNetPaS) project and analyses the principles and elements of the guidance that should be provided to those who design and implement Patient Safety Education and training activities. The main principles that it should be based on and the core teaching objectives-expected outcomes are addressed. Once the main context and considerations are properly set, the guidance should define the general schema of the content that should be included in the Education and Training activities, as well as how these activities would be delivered. It is also important that the different roles of the recipients are clearly distinguished and linked to their role-specific methods, proper delivery platforms and success stories. Setting these principles into practice when planning and implementing interventions, primarily aims to enlighten and support those who are enrolled to design and implement Patient Safety education and training teaching activities. This is achieved by providing them with a framework to build upon, succeeding to build a collaborative, safety conscious and competent environment, in terms of PS. A guidelines web platform has been developed to support this process.
Safety Training: places available in the forthcoming sessions in May

CERN Multimedia

Safety Commission

2010-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. MAY 2010: Confined spaces – for supervisors, 4 May, in French, 1 day, 09:00 – 17:30 Laser safety, 5 May, in French, 4 hours, 13:30 – 17:30 Radiological Protection, 7 May, in English, 4 hours, 13:30 – 17:30 Secourisme - Cours de recyclage, 7 May, in French, 4 hours, 08:30 – 12:30 Secourisme - Cours de recyclage, 7 May, in French, 4 hours, 12:30 – 17:30 Cherry-picker driving (basic course), 10-11 May, in French, 2 days, 08:00 – 17:30 Habilitation électrique : Personnel électricien effectuant des opérations du domaine de tension BTA, 10-11 May, in English, 2 days, 09:00 – 17:30 Biocell Training, 11 May, in French, 1.5 hour, 08:30 – 10:00 Biocell Training, 11 May, in French, 1.5 hour, 10:30 – 12:00 Radiological Protection, 11 May, in English, ...
EXPERIENCE NETWORKING UNIVERSITY OF EDUCATION TRAINING MASTERS SAFETY OF LIFE

Directory of Open Access Journals (Sweden)

Elvira Mikhailovna Rebko

2016-02-01

Full Text Available The article discloses experience networking of universities (Herzen State Pedagogical University and Sakhalin State University in the development and implementation of joint training programs for master’s education in the field of life safety «Social security in the urban environment». The novelty of the work is to create a schematic design of basic educational training program for master’s education in the mode of networking, and to identify effective instructional techniques and conditions of networking.Purpose – present the results of the joint development of a network of the basic educational program (BEP, to identify the stages of networking, to design a generalized scheme of development and implementation of a network of educational training program for master’s education in the field of life safety.Results generalized model of networking partner institutions to develop and implement the basic educational program master.Practical implications: the education process for Master of Education in the field of health and safety in Herzen State Pedagogical University and Sakhalin State University.
Assessment of Native Languages for Food Safety Training Programs for Meat Industry Employees

Science.gov (United States)

Olsen, Sherrlyn S.; Cordray, Joseph C.; Sapp, Stephen; Sebranek, Joseph G.; Anderson, Barbara; Wenger, Matt

2012-01-01

Challenges arise when teaching food safety to culturally diverse employees working in meatpacking and food manufacturing industries. A food safety training program was developed in English, translated into Spanish, and administered to 1,265 adult learners. Assessments were conducted by comparing scores before and immediately following training.…

10CFR50.59 safety evaluation training and expert system development

International Nuclear Information System (INIS)

Kline, S.W.; Dickinson, D.B.

1988-01-01

10CFR50.59 permits utilities to make changes to and conduct tests or experiments on operating nuclear power plants without prior US Nuclear Regulatory Commission (NCR) approval unless the proposed change, test, or experiment (i.e, the proposed activity) involves a change to the plant technical specifications or an unreviewed safety question (USQ). To provide guidance to their engineers for making the determination of whether a proposed activity involves a USQ. Bechtel has developed a safety evaluation training program. This training program incorporates the guidance in and NRC comments to the November 1987 draft Nuclear Management and Resources Council safety evaluation guidance document, NRC statements contained in inspection reports and other documents, and the experience of senior Bechtel engineers. To further develop the question and concerns that need to be addressed in a safety evaluation in a systematic manner, Bechtel is incorporating the training program guidance and other information into an IBM PC-AT-based working model of an expert system using the NEXPERT expert system development tool. The development and use of this expert system working model are being undertaken to provide consistency and completeness to the thought process used and the output provided by Bechtel engineers when performing a safety evaluation
The Safety Assessment Education and Training Programme (SAET). Education and Training in the Area of Safety Assessment

International Nuclear Information System (INIS)

Mellinger-Deroy, M.

2014-01-01

• The SAET Programme provides a systematic approach for training regulatory, operational and technical support staff in the skills needed for informed decision-making and technical review of NPP safety case documentation. • The objective of the Programme is to support the IAEA Member States in developing the knowledge and skills necessary for making the right decisions in NPP design, licensing and operation. (author)
Evaluating Behavioral Skills Training with and without Simulated in Situ Training for Teaching Safety Skills to Children

Science.gov (United States)

Miltenberger, Raymond; Gross, Amy; Knudson, Peter; Bosch, Amanda; Jostad, Candice; Breitwieser, Carrie Brower

2009-01-01

This study compared the effectiveness of behavioral skills training (BST) to BST plus simulated in situ training (SIT) for teaching safety skills to children to prevent gun play. The results were evaluated in a posttest only control group design. Following the first assessment, participants in both training groups and the control group who did not…
Preventing Child Sexual Abuse: Body Safety Training for Young Children in Turkey.

Science.gov (United States)

Citak Tunc, Gulseren; Gorak, Gulay; Ozyazicioglu, Nurcan; Ak, Bedriye; Isil, Ozlem; Vural, Pinar

2018-06-01

The "Body Safety Training Program" is an education program aimed at ensuring children are informed about their body and acquire self-protection skills. In this study, a total of 83 preschoolers were divided into experimental and control groups; based on a power analysis, 40 children comprised the experimental group, while 43 children comprised the control group. The "Body Safety Training Programme" was translated into Turkish and content validity was determined regarding the language and cultural appropriateness. The "What If Situations Test" (WIST) was administered to both groups before and after the training. Mann-Whitney U Test, Kruskal-Wallis Variance Analysis, and the Wilcoxon Signed Ranks Test were used to compare between the groups and the Spearman correlation analysis was used to determine the strength of the relationship between the dependent and independent variable. The differences between the pretest and posttest scores for the subscales (appropriate recognition, inappropriate recognition, say, do, tell, and reporting skills), and the personal safety questionnaire (PSQ) score means for the children in the experimental group were found to be statistically significant (p Body Safety Training programme" is effective in increasing the child sexual abuse prevention and self-protection skills in Turkish young children.
Safety Training: scheduled sessions in September and October 2011

CERN Multimedia

2011-01-01

The following training courses are scheduled in September – October. You can find the full Safety Training programme on the Safety Training online catalogue. If you are interested in attending any of the below courses, please talk to your supervisor, then apply electronically via EDH from the course description pages, by clicking on SIGN-UP. Registration for all courses is always open – sessions for the less-requested courses are organized on a demand-basis only. Depending on the demand, a session will be organised later in the year. Alphabetical order (original course titles are maintained) Conduite de chariots élévateurs 17-OCT-11 to 18-OCT-11, 8.00 – 17.30, in French * Ergonomics - Applying ergonomic principles in the workplace 15-SEP-11, 9.00 – 12.30, in French 15-SEP-11, 14.00 – 17.30, in English Habilitation électrique : Personnel électricien effectuant des opérations du domaine de tension BTA...
The Safety Training Centre is also used for recruitment

CERN Multimedia

Antonella Del Rosso

2014-01-01

The Safety Training Centre on the Prévessin site boasts not only a life-sized mock-up of the LHC accelerator but also a number of other simulators, such as those used for electrical work certification (“habilitation électrique"). What better place to test the technical competencies of candidates applying for a job in the CERN Fire Brigade? Instructors put the technical competencies of candidates applying for positions in the CERN Fire Brigade to the test in the tunnel that houses the LHC mock-up. On 4 and 5 November, the Fire and Rescue Service’s facilities were used for the first time by the selection committee for a staff position. This gave candidates the chance to show their abilities and physical fitness in practice. CERN’s Safety Training Centre, which was fitted with a mock-up of the LHC in 2013, is becoming more and more widely used: by the Fire Brigade for their professional training sessions, incl...
Participatory/problem-based methods and techniques for training in health and safety.

Science.gov (United States)

Rosskam, E

2001-01-01

More knowledgeable and trained people are needed in the area of occupational health, safety, and environment (OSHE) if work-related fatalities, accidents, and diseases are to be reduced. Established systems have been largely ineffective, with few employers taking voluntary measures to protect workers and the environment and too few labor inspectors available. Training techniques using participatory methods and a worker empowerment philosophy have proven value. There is demonstrated need for the use of education for action, promoting the involvement of workers in all levels of decision-making and problem-solving in the workplace. OSH risks particular to women s jobs are virtually unstudied and not addressed at policy levels in most countries. Trade unions and health and safety professionals need to demystify technical areas, empower workers, and encourage unions to dedicate special activities around women s jobs. Trained women are excellent motivators and transmitters of safety culture. Particular emphasis is given to train-the-trainer approaches.
Supervisor's experiments on radiation safety trainings in school of engineering

International Nuclear Information System (INIS)

Nomura, Kiyoshi

2005-01-01

Radiation safety training courses in School of Engineering, The University of Tokyo, were introduced. The number of radiation workers and the usage of radiation and radioisotopes have been surveyed for past 14 years. The number of radiation workers in School of Engineering has increased due to the treatment of X-ray analysis of materials, recently. It is important for workers to understand the present situation of School of Engineering before the treatment of radiation and radioisotopes. What the supervisor should tell to radiation workers were presented herewith. The basic questionnaires after the lecture are effective for radiation safety trainings. (author)
Training and Action for Patient Safety: Embedding Interprofessional Education for Patient Safety within an Improvement Methodology

Science.gov (United States)

Slater, Beverley L.; Lawton, Rebecca; Armitage, Gerry; Bibby, John; Wright, John

2012-01-01

Introduction: Despite an explosion of interest in improving safety and reducing error in health care, one important aspect of patient safety that has received little attention is a systematic approach to education and training for the whole health care workforce. This article describes an evaluation of an innovative multiprofessional, team-based…
78 FR 979 - Petition for Positive Train Control Safety Plan Approval and System Certification of the...

Science.gov (United States)

2013-01-07

...] Petition for Positive Train Control Safety Plan Approval and System Certification of the Electronic Train... the Federal Railroad Administration (FRA) for Positive Train Control (PTC) Safety Plan (PTCSP) approval and system certification of the Electronic Train Management System (ETMS) as required by 49 U.S.C...
Instructional games and activities for criticality safety training

International Nuclear Information System (INIS)

Bullard, B.; McBride, J.

1993-01-01

During the past several years, the Training and Management Systems Division (TMSD) staff of Oak Ridge Institute for Science and Education (ORISE) has designed and developed nuclear criticality safety (NCS) training programs that focus on high trainee involvement through the use of instructional games and activities. This paper discusses the instructional game, initial considerations for developing games, advantages and limitations of games, and how games may be used in developing and implementing NCS training. It also provides examples of the various instructional games and activities used in separate courses designed for Martin Marietta Energy Systems (MMES's) supervisors and U.S. Nuclear Regulatory Commission (NRC) fuel facility inspectors
75 FR 5333 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2010-02-02

...) Place: Embassy Suites Hotel, 1900 Diagonal Road, Alexandria, Virginia 22314, Telephone (703) 684-5900... matters related to the conduct of Study Section business and for the study section to consider safety and...
Safety Training: Ergonomie - Sensibilisation à l'ergonomie bureautique - French version only

CERN Multimedia

Laetitia Laddada

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Formation en SECURITE SAFETY Training Laetitia Laddada 73811 - 79236 safety.training@cern.ch Nous vous proposons une 1/2 journée de sensibilisation sur les risques engendrés par une mauvaise posture lors du travail sur écran (mal de dos, fatigue visuelle, douleurs des poignets...) et des bonnes pratiques pour y remédier. Les prochaines sessions auront lieu le 8 juillet 2004. Les cours sont pris en charge par la Commission de Sécurité et animés par Clemente Pilly et Ribordy Marion de « PM postures &ra...
77 FR 6411 - Training, Qualification, and Oversight for Safety-Related Railroad Employees

Science.gov (United States)

2012-02-07

... Oversight for Safety-Related Railroad Employees AGENCY: Federal Railroad Administration (FRA), Department of... establishing minimum training standards for each category and subcategory of safety-related railroad employee... or contractor that employs one or more safety-related railroad employee to develop and submit a...
Evaluation of aviation-based safety team training in a hospital in The Netherlands.

Science.gov (United States)

De Korne, Dirk F; Van Wijngaarden, Jeroen D H; Van Dyck, Cathy; Hiddema, U Francis; Klazinga, Niek S

2014-01-01

The purpose of this paper is to evaluate the implementation of a broad-scale team resource management (TRM) program on safety culture in a Dutch eye hospital, detailing the program's content and procedures. Aviation-based TRM training is recognized as a useful approach to increase patient safety, but little is known about how it affects safety culture. Pre- and post-assessments of the hospitals' safety culture was based on interviews with ophthalmologists, anesthesiologists, residents, nurses, and support staff. Interim observations were made at training sessions and in daily hospital practice. The program consisted of safety audits of processes and (team) activities, interactive classroom training sessions by aviation experts, a flight simulator session, and video recording of team activities with subsequent feedback. Medical professionals considered aviation experts inspiring role models and respected their non-hierarchical external perspective and focus on medical-technical issues. The post-assessment showed that ophthalmologists and other hospital staff had become increasingly aware of safety issues. The multidisciplinary approach promoted social (team) orientation that replaced the former functionally-oriented culture. The number of reported near-incidents greatly increased; the number of wrong-side surgeries stabilized to a minimum after an initial substantial reduction. The study was observational and the hospital's variety of efforts to improve safety culture prevented us from establishing a causal relation between improvement and any one specific intervention. Aviation-based TRM training can be a useful to stimulate safety culture in hospitals. Safety and quality improvements are not single treatment interventions but complex socio-technical interventions. A multidisciplinary system approach and focus on "team" instead of "profession" seems both necessary and difficult in hospital care.
Safety and health education and training of contract workers in nuclear power plants

International Nuclear Information System (INIS)

Matsumoto, Akikuni; Hara, Hisayuki; Nawata, Kazumitsu

2008-01-01

Nuclear power plants have used many contract workers. Their safety and health conditions are very important in Japan. Several amendments, which deregulate temporary personnel service and employment agency markets, have been done in recent years. The number of contract and temporary help agency workers have been rapidly increasing especially since the 1990s. As a result, ensuring the level of safety and health education and training of workers becomes a serious problem. This paper examines the possibility that the level of safety training of the contract workers is less than that of the direct-hire employees in nuclear power plants. We show that (1) the use of contract workers could be less efficient for ensuring the level of safety training, and (2) nuclear power plants still use contract workers in some situations in spite of the loss of efficiency. We also study legislations and past cases relating to nuclear power generation. We find that there are some structural problems that might make the contract workers less trained. (author)
Workplace Safety and Health Improvements Through a Labor/Management Training and Collaboration

Science.gov (United States)

Mahan, Bruce; Morawetz, John; Ruttenberg, Ruth; Workman, Rick

2014-01-01

Seven hundred thirty-nine workers at Merck's Stonewall plant in Elkton, Virginia, have a safer and healthier workplace because four of them were enthusiastic about health and safety training they received from the union's training center in Cincinnati, Ohio. What emerged was not only that all 739 plant employees received OSHA 10-hour General Industry training, but that it was delivered by “OSHA-authorized” members of the International Chemical Workers Union Council who worked at the plant. Merck created a new fulltime position in its Learning and Development Department and hired one of the four workers who had received the initial training. Strong plant leadership promoted discussions both during the training, in evaluation, and in newly energized joint labor-management meetings following the training. These discussions identified safety and health issues needing attention. Then, in a new spirit of trust and collaboration, major improvements occurred. PMID:24704812
Workplace safety and health improvements through a labor/management training and collaboration.

Science.gov (United States)

Mahan, Bruce; Morawetz, John; Ruttenberg, Ruth; Workman, Rick

2013-01-01

Seven hundred thirty-nine workers at Merck's Stonewall plant in Elkton, Virginia, have a safer and healthier workplace because four of them were enthusiastic about health and safety training they received from the union's training center in Cincinnati, Ohio. What emerged was not only that all 739 plant employees received OSHA 10-hour General Industry training, but that it was delivered by "OSHA-authorized" members of the International Chemical Workers Union Council who worked at the plant. Merck created a new full-time position in its Learning and Development Department and filled it with one of the four workers who had received the initial training. Strong plant leadership promoted discussions both during the training, in evaluation, and in newly energized joint labor-management meetings following the training. These discussions identified safety and health issues needing attention. Then, in a new spirit of trust and collaboration, major improvements occurred.
49 CFR 238.105 - Train electronic hardware and software safety.

Science.gov (United States)

2010-10-01

... and software system safety as part of the pre-revenue service testing of the equipment. (d)(1... safely by initiating a full service brake application in the event of a hardware or software failure that... 49 Transportation 4 2010-10-01 2010-10-01 false Train electronic hardware and software safety. 238...
77 FR 75633 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2012-12-21

... (Closed). 8:00 a.m.-5:00 p.m., February 22, 2013 (Closed). Place: Embassy Suites, 1900 Diagonal Road... conduct of Study Section business and for the study section to consider safety and occupational health...

The Development, Content, Design, and Conduct of the 2011 Piloted US DOE Nuclear Criticality Safety Program Criticality Safety Engineering Training and Education Project

International Nuclear Information System (INIS)

Hopper, Calvin Mitchell

2011-01-01

In May 1973 the University of New Mexico conducted the first nationwide criticality safety training and education week-long short course for nuclear criticality safety engineers. Subsequent to that course, the Los Alamos Critical Experiments Facility (LACEF) developed very successful 'hands-on' subcritical and critical training programs for operators, supervisors, and engineering staff. Since the inception of the US Department of Energy (DOE) Nuclear Criticality Technology and Safety Project (NCT and SP) in 1983, the DOE has stimulated contractor facilities and laboratories to collaborate in the furthering of nuclear criticality as a discipline. That effort included the education and training of nuclear criticality safety engineers (NCSEs). In 1985 a textbook was written that established a path toward formalizing education and training for NCSEs. Though the NCT and SP went through a brief hiatus from 1990 to 1992, other DOE-supported programs were evolving to the benefit of NCSE training and education. In 1993 the DOE established a Nuclear Criticality Safety Program (NCSP) and undertook a comprehensive development effort to expand the extant LACEF 'hands-on' course specifically for the education and training of NCSEs. That successful education and training was interrupted in 2006 for the closing of the LACEF and the accompanying movement of materials and critical experiment machines to the Nevada Test Site. Prior to that closing, the Lawrence Livermore National Laboratory (LLNL) was commissioned by the US DOE NCSP to establish an independent hands-on NCSE subcritical education and training course. The course provided an interim transition for the establishment of a reinvigorated and expanded two-week NCSE education and training program in 2011. The 2011 piloted two-week course was coordinated by the Oak Ridge National Laboratory (ORNL) and jointly conducted by the Los Alamos National Laboratory (LANL) classroom education and facility training, the Sandia National
78 FR 64504 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2013-10-29

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH or..., Number 177, Pages 56235-56236. Contact Person for More Information: Price Connor, Ph.D., NIOSH Health...
49 CFR 193.2715 - Training: security.

Science.gov (United States)

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Training: security. 193.2715 Section 193.2715...: FEDERAL SAFETY STANDARDS Personnel Qualifications and Training § 193.2715 Training: security. (a) Personnel responsible for security at an LNG plant must be trained in accordance with a written plan of...
Health and Safety Legislation in Australia: Complexity for Training Remains

Science.gov (United States)

Bahn, Susanne; Barratt-Pugh, Llandis

2014-01-01

This paper presents the findings from a study that examined the impact of the National Occupational Health and Safety Strategy 2002-2012 and the harmonisation of the Work Health and Safety Act 2011 on Australian training design, delivery and outcomes. There has been a comparative reduction in work related injuries, fatalities and disease, and…
Republished: Building a culture of safety through team training and engagement.

Science.gov (United States)

Thomas, Lily; Galla, Catherine

2013-07-01

Medical errors continue to occur despite multiple strategies devised for their prevention. Although many safety initiatives lead to improvement, they are often short lived and unsustainable. Our goal was to build a culture of patient safety within a structure that optimised teamwork and ongoing engagement of the healthcare team. Teamwork impacts the effectiveness of care, patient safety and clinical outcomes, and team training has been identified as a strategy for enhancing teamwork, reducing medical errors and building a culture of safety in healthcare. Therefore, we implemented Team Strategies and Tools to Enhance Performance and Patient Safety (TeamSTEPPS), an evidence-based framework which was used for team training to create transformational and/or incremental changes; facilitating transformation of organisational culture, or solving specific problems. To date, TeamSTEPPS (TS) has been implemented in 14 hospitals, two Long Term Care Facilities, and outpatient areas across the North Shore LIJ Health System. 32 150 members of the healthcare team have been trained. TeamSTEPPS was piloted at a community hospital within the framework of the health system's organisational care delivery model, the Collaborative Care Model to facilitate sustainment. AHRQ's Hospital Survey on Patient Safety Culture, (HSOPSC), was administered before and after implementation of TeamSTEPPS, comparing the perception of patient safety by the heathcare team. Pilot hospital results of HSOPSC show significant improvement from 2007 (pre-TeamSTEPPS) to 2010. System-wide results of HSOPSC show similar trends to those seen in the pilot hospital. Valuable lessons for organisational success from the pilot hospital enabled rapid spread of TeamSTEPPS across the rest of the health system.
77 FR 43090 - Safety and Occupational Health Study Section: Notice of Charter Renewal

Science.gov (United States)

2012-07-23

... Committee Act (Pub. L. 92-463) of October 6, 1972, that the Safety and Occupational Health Study Section... Secretary, Safety and Occupational Health Study Section, Department of Health and Human Services, 1600... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Safety and...
75 FR 42455 - Safety and Occupational Health Study Section: Notice of Charter Renewal

Science.gov (United States)

2010-07-21

... Committee Act (Pub. L. 92-463) of October 6, 1972, that the Safety and Occupational Health Study Section... Secretary, Safety and Occupational Health Study Section, Department of Health and Human Services, 1600... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Safety and...
Training Children in Pedestrian Safety: Distinguishing Gains in Knowledge from Gains in Safe Behavior

OpenAIRE

Schwebel, David C.; McClure, Leslie A.

2014-01-01

Pedestrian injuries contribute greatly to child morbidity and mortality. Recent evidence suggests that training within virtual pedestrian environments may improve children’s street crossing skills, but may not convey knowledge about safety in street environments. We hypothesized that (a) children will gain pedestrian safety knowledge via videos/software/internet websites, but not when trained by virtual pedestrian environment or other strategies; (b) pedestrian safety knowledge will be associ...
Education and Training of Safety Regulation for Nuclear Safety Infrastructure: Its Necessity and Unique Features

International Nuclear Information System (INIS)

Choi, Young Sung; Choi, Young Joon; Lee, Jae Cheon

2009-01-01

Faced with global warming and electricity demands, countries over the world recognize the comparative advantages of nuclear energy. It is estimated that about 300 nuclear power plants (NPPs) expect to be constructed until 2030 worldwide. In addition, according to the IAEA, approximately 20 new countries might have their first NPP in operation by 2030 in the high projection compared with bout 5 new countries in the low projection. When introducing nuclear power, the implementation of an appropriate infrastructure to address all of the relevant issues is a central concern of international community. In particular, nuclear power program requires, at an earlier stage than when construction starts, the development of a legal and regulatory framework and training of regulators and safety experts whose combined knowledge adequately covers all areas of nuclear safety and regulation applied at a NPP construction and operation. As an essential component of such human resource development, special attention was paid to the provision of education and training to regulators of which countries plan to introduce NPPs. In term of education theory, safety regulation has some unique features in learning and teaching, which are different from those of nuclear engineering or development. This paper overviews nuclear safety infrastructure, explores the roles of exporting countries, and presents features and components in education of nuclear safety regulation
[Does annual simulation training influence the safety climate of a university hospital? : Prospective 5‑year investigation using dimensions of the safety attitude questionnaire].

Science.gov (United States)

St Pierre, M; Gall, C; Breuer, G; Schüttler, J

2017-12-01

Simulation-based training with a focus on non-technical skills can have a positive influence on safety relevant attitudes of participants. If an organization succeeds in training sufficient staff, it may experience a positive change in the safety climate. As the effects of a single training are of a transient nature, annual training sessions may lead to an incremental improvement of safety relevant attitudes of employees over time. In spring 2012 the Department of Anesthesia at the University Hospital of Erlangen established an annual simulation-based training for staff members (e.g. consultants, trainee anesthetists and nurse anesthetists). The study aimed to test whether an annual simulation-based training would result in an incremental longitudinal improvement in attitudes towards teamwork, safety and stress recognition. A survey comprising three domains (teamwork climate, safety climate and stress recognition) of the safety attitudes questionnaire (SAQ) and items addressing briefing and speaking up was distributed to all participants in an annual in-house simulation training. Participants filled out the questionnaire in the morning of each training day. The attitudes were measured before the first training series in 2012, 6 months after the first training and then every year (2013-2016). Participants generated a personalized identification code which allowed individuals to be anonymously tracked over time. Results of the 5‑point Likert scale were transformed to a 100-point scale. Results were calculated at the group level and at the individual level. Univariable linear regression was used to calculate mean changes per year. Over a period of 5 years (2012-2016) a total of 255 individuals completed the questionnaire. Each year, 14-20% of all nurse anesthetists and 81-90% of all anesthetists participated in the simulation-based training. As a result of annual staff turnover 16-24% of participants were new staff members. A personalized code allowed the
Editorial: Advances in healthcare provider and patient training to improve the quality and safety of patient care

Directory of Open Access Journals (Sweden)

Elizabeth M. Borycki

2015-09-01

Full Text Available This special issue of the Knowledge Management & E-Learning: An International Journal is dedicated to describing “Advances in Healthcare Provider and Patient Training to Improve the Quality and Safety of Patient Care.” Patient safety is an important and fundamental requirement of ensuring the quality of patient care. Training and education has been identified as a key to improving healthcare provider patient safety competencies especially when working with new technologies such as electronic health records and mobile health applications. Such technologies can be harnessed to improve patient safety; however, if not used properly they can negatively impact on patient safety. In this issue we focus on advances in training that can improve patient safety and the optimal use of new technologies in healthcare. For example, use of clinical simulations and online computer based training can be employed both to facilitate learning about new clinical discoveries as well as to integrate technology into day to day healthcare practices. In this issue we are publishing papers that describe advances in healthcare provider and patient training to improve patient safety as it relates to the use of educational technologies, health information technology and on-line health resources. In addition, in the special issue we describe new approaches to training and patient safety including, online communities, clinical simulations, on-the-job training, computer based training and health information systems that educate about and support safer patient care in real-time (i.e. when health professionals are providing care to patients. These educational and technological initiatives can be aimed at health professionals (i.e. students and those who are currently working in the field. The outcomes of this work are significant as they lead to safer care for patients and their family members. The issue has both theoretical and applied papers that describe advances in patient
An Analysis of Trainers' Perspectives within an Ecological Framework: Factors that Influence Mine Safety Training Processes.

Science.gov (United States)

Haas, Emily J; Hoebbel, Cassandra L; Rost, Kristen A

2014-09-01

Satisfactory completion of mine safety training is a prerequisite for being hired and for continued employment in the coal industry. Although training includes content to develop skills in a variety of mineworker competencies, research and recommendations continue to specify that specific limitations in the self-escape portion of training still exist and that mineworkers need to be better prepared to respond to emergencies that could occur in their mine. Ecological models are often used to inform the development of health promotion programs but have not been widely applied to occupational health and safety training programs. Nine mine safety trainers participated in in-depth semi-structured interviews. A theoretical analysis of the interviews was completed via an ecological lens. Each level of the social ecological model was used to examine factors that could be addressed both during and after mine safety training. The analysis suggests that problems surrounding communication and collaboration, leadership development, and responsibility and accountability at different levels within the mining industry contribute to deficiencies in mineworkers' mastery and maintenance of skills. This study offers a new technique to identify limitations in safety training systems and processes. The analysis suggests that training should be developed and disseminated with consideration of various levels-individual, interpersonal, organizational, and community-to promote skills. If factors identified within and between levels are addressed, it may be easier to sustain mineworker competencies that are established during safety training.
Education and Training in Radiation, Transport and Waste Safety Newsletter, No. 3, May 2014

International Nuclear Information System (INIS)

2014-05-01

Building competence through education and training in radiation protection, radioactive waste safety, and safety in transport of radioactive material is fundamental to the establishment of a comprehensive and sustainable national infrastructure for radiation safety, which in turn is essential for the beneficial uses of radiation while ensuring appropriate protection of workers, patients, the public and the environment. IAEA’s Division of Radiation, Transport and Waste Safety provides direct assistance to Member States via a range of tools and mechanisms, such as by organizing educational and training events, developing standardized syllabi with supporting material and documents, and by fostering methodologies to build sustainable competence and enhance effectiveness in the provision of training. The main objective is to support Member States in the application of the IAEA Safety Standards. Seminars and additional activities are also promoted to broaden knowledge on relevant areas for an effective application of the standards
Occupational Safety and Health Professionals' Training in Italy: Qualitative Evaluation Using T-LAB

Science.gov (United States)

Papaleo, Bruno; Cangiano, Giovanna; Calicchia, Sara

2013-01-01

Purpose: The purpose of this paper is to describe the evaluation of a training course on chemicals for occupational safety and health (OSH) professionals. The study aims were to assess the effectiveness of the course; to find out what type of training met these workers' needs best, as their role is vital in the management of safety at work; and to…
30 CFR 56.14214 - Train warnings.

Science.gov (United States)

2010-07-01

... Safety Practices and Operational Procedures § 56.14214 Train warnings. A warning that is audible above the surrounding noise level shall be sounded— (a) Immediately prior to moving trains; (b) When trains... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Train warnings. 56.14214 Section 56.14214...
Safety training: Ergonomie - Sensibilisation à l'ergonomie bureautique

CERN Multimedia

Laetitia Laddada

2004-01-01

Nous vous proposons une 1/2 journée de sensibilisation sur les risques engendrés par une mauvaise posture lors du travail sur écran (mal de dos, fatigue visuelle, douleurs des poignets...) et des bonnes pratiques pour y remédier. Les prochaines sessions auront lieu le 8 juillet 2004. Les cours sont pris en charge par la Commission de Sécurité et animés par Pily Clemente et Marion Ribordy de « PM postures » . L'inscription via EDH est obligatoire. Pour plus d'information et inscription par EDH à ce cours, veuillez consulter les pages Formation et Développement (groupe sécurité) de HR, ou contacter l'organisateur. Les places seront attribuées dans l'ordre de réception des inscriptions. Organisateur : Ana-Paula Bernardes/SC-GS (71385) Ana-paula.bernardes@cern.chFORMATION EN SECURITE SAFETY TRAINING Laetitia Laddada 73811 - 79236 safety.training@cern.ch
A Model Train-The-Trainer Program for HACCP-Based Food Safety Training in the Retail/Food Service Industry: An Evaluation.

Science.gov (United States)

Martin, Kenneth E.; Knabel, Steve; Mendenhall, Von

1999-01-01

A survey showed states are adopting higher training and certification requirements for food-service workers. A train-the-trainer model was developed to prepare extension agents, health officers, and food-service managers to train others in food-safety procedures. (SK)
Safety Training: places available in October 2013

CERN Multimedia

Isabelle CUSATO, HSE Unit

2013-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. October 2013 (alphabetical order) Habilitation ATEX niveau 1 (ATEX habilitation level 1) 08-OCT-13, 9.00 – 17.30, in French Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (Driving cherry-pickers) 21-OCT-13 to 22-OCT-13, 08.30 – 17.30, in French with handouts in English Ergonomics - Applying ergonomic principles in the workplace 03-OCT-13, 9.00 – 12.00, in English Être TSO au CERN (Being a TSO at CERN) 29-OCT-13 to 31-OCT-13, 9.00 – 17.30, in French Self-Rescue Mask Training 01-OCT-13, 10.30 – 12.30, in French 03-OCT-13, 10.30 – 12.30, in English 04-OCT-13, 8.30 – 10.30, in English 08-OCT-13, 10.30 – 12.30, in French 09-OCT-13, 10.30 – 12.30, in English 15-OCT-13, 10.30 – 12.30, in French 17-OCT-13, 10.30...
Safety Training: places available in February 2013

CERN Multimedia

Isabelle CUSATO, HSE Unit

2013-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. February 2013 (alphabetical order) Noise - Understanding the risks 01-FEB-13, 10.00 – 12.30, in French Magnetic Fields 08-FEB-13, 9.00 – 11.30, in French Conduite de plates-formes élévatrices mobiles de personnel (PEMP) – Cherry-picker driving 18-FEB-13 to 19-FEB-13, 8.30 – 17.30, in French Self-Rescue Mask Training 05-FEB-13, 8.30 – 10.00, in French 05-FEB-13, 10.30 – 12.00, in French 12-FEB-13, 8.30 – 10.00, in French 12-FEB-13, 10.30 – 12.00, in French 14-FEB-13, 8.30 – 10.00, en anglais 14-FEB-13, 10.30 – 12.00, en anglais 19-FEB-13, 8.30 – 10.00, in French 19-FEB-13, 10.30 – 12.00, in French 21-FEB-13, 8.30 – 10.00, en anglais 21-FEB-13, 10.30 – 12.00, en anglais 26-FEB-13, 8.30 &ndash...
Safety Training: Ergonomie - Sensibilisation aux gestes et postures de travail

CERN Multimedia

Laetitia Laddada

2004-01-01

Nous vous proposons un nouveau cours d'ergonomie (durée : 1 jour) Sensibilisation aux gestes et postures de travail. A l'issue de cette formation, vous serez capable d'adopter et d'appliquer les principes de base de sécurité physique et d'économie d'efforts dans les manipulations d'objets. Les cours sont pris en charge par la Commission de Sécurité. L'inscription EDH est obligatoire. Pour plus d'information, veuillez consulter les pages Formation & Développement (Groupe Sécurité). FORMATION EN SECURITE SAFETY TRAINING Laetitia Laddada 73811 - 79236 safety.training@cern.ch

HySTAR: the hydrogen safety training and risk workplace

International Nuclear Information System (INIS)

Hay, R.

2006-01-01

This paper shows the output of the software package HySTAR, the Hydrogen Safety, Training and Risk Workplace. This is the software output of the CTFA, Canadian Hydrogen Safety Program projects. It shows the Hydrogen Virtual Interactive Expert Workplace, a guide for permitting and code enforcement for officials and other parties involved in approving hydrogen energy facilities. It also shows the Hydrogen Codes and Standards Report (Site Level) as well as Hydrogen Distances and Clearances Report
Safety Training: Sensibilisation aux gestes et postures de travail

CERN Multimedia

Laetitia Laddada

2004-01-01

Nous vous proposons un nouveau cours de sécurité lié aux manutentions manuelles (durée 1 jour) : Sensibilisation aux gestes et postures de travail. Si vous êtes amené à manipuler régulièrement des charges lourdes ou volumineuses, cette formation peut vous aider à prévenir les lésions musculaires ou dorsales. A l'issue de cette formation, vous serez capable d'adopter et d'appliquer les principes de base de sécurité physique et d'économie d'efforts dans les manipulations d'objets. Les cours sont pris en charge par la Commission de Sécurité. L'inscription EDH est obligatoire. Pour plus d'information, veuillez consulter les pages Formation & Développement (Groupe Sécurité). FORMATION EN SECURITE SAFETY TRAINING Laetitia Laddada 73811 - 79236 safety.training@cern.ch
Training for an effective health and safety committee in a small business setting.

Science.gov (United States)

Crollard, Allison; Neitzel, Richard L; Dominguez, Carlos F; Seixas, Noah S

2013-01-01

Health and safety committees are often heralded as a key element of successful health and safety programs, and are thought to represent a means of engaging workers in health and safety efforts. While the understanding of the factors that make these committees effective is growing, there are few resources for how to assist committees in developing these characteristics. This paper describes one approach to creating and implementing a training intervention aimed at improving health and safety committee function at one multilingual worksite. Short-term impacts were evaluated via questionnaire and qualitative observations of committee function. Results indicated high satisfaction with the training as well as modest increases in participation, cooperation, role clarity, and comfort with health and safety skills among committee members. The committee also made considerable achievements in establishing new processes for effective function. Similar interventions may be useful in other workplaces to increase health and safety committee success.
Occupational injuries and safety measures adopted by welding workers: a cross sectional study in South India

Directory of Open Access Journals (Sweden)

Bhumika.T.V.

2014-01-01

Full Text Available Background Welders have been identified as a high risk group according to ranking of occupations based on cost related injuries. Employment of safety measures and practices among welders are potential ways of preventing occupational injuries. Adherence to these precautions is nearly universal in the developed world but there is scarcity of information about the situation in developing world including India. Objectives 1 To estimate the prevalence of occupational injuries among welding workers in Udupi district; 2 To assess the perception towards occupational hazards and the safety measures adopted by the welders Material and Methods A cross- sectional study was conducted among 160 non- industrial welding workers in Udupi district. A pre-structured interviewer-administered questionnaire was used. Results The prevalence of occupational injuries was found to be 80%. Only 24.4% of the welders had undergone professional training. Though 95% of them were aware of the importance of personal protective equipments (PPE, only 37.5% of them were regularly using PPE. Majority (75% of them reported that welding profession was dangerous. Around 79% of the workers reported carelessness being the major cause of injury during work. Working hours of less than 8 hours in a day, reading of safety manual and maintenance of equipments were significantly positively associated with occupational injuries among welding workers. Conclusion Occupational injuries during welding are preventable. The level of experience, training and attitude while working can reduce the injuries to large extent.
Occupational injuries and safety measures adopted by welding workers: a cross sectional study in South India

Directory of Open Access Journals (Sweden)

Bhumika.T.V.

2014-09-01

Full Text Available Background Welders have been identified as a high risk group according to ranking of occupations based on cost related injuries. Employment of safety measures and practices among welders are potential ways of preventing occupational injuries. Adherence to these precautions is nearly universal in the developed world but there is scarcity of information about the situation in developing world including India. Objectives 1 To estimate the prevalence of occupational injuries among welding workers in Udupi district; 2 To assess the perception towards occupational hazards and the safety measures adopted by the welders Material and Methods A cross--‐ sectional study was conducted among 160 non--‐ industrial welding workers in Udupi district. A pre--‐structured interviewer--‐administered questionnaire was used. Results The prevalence of occupational injuries was found to be 80%. Only 24.4% of the welders had undergone professional training. Though 95% of them were aware of the importance of personal protective equipments (PPE, only 37.5% of them were regularly using PPE. Majority (75% of them reported that welding profession was dangerous. Around 79% of the workers reported carelessness being the major cause of injury during work. Working hours of less than 8 hours in a day, reading of safety manual and maintenance of equipments were significantly positively associated with occupational injuries among welding workers. Conclusion Occupational injuries during welding are preventable. The level of experience, training and attitude while working can reduce the injuries to large extent.
49 CFR 214.325 - Train coordination.

Science.gov (United States)

2010-10-01

..., DEPARTMENT OF TRANSPORTATION RAILROAD WORKPLACE SAFETY Roadway Worker Protection § 214.325 Train coordination. Working limits established by a roadway worker through the use of train coordination shall comply with the... 49 Transportation 4 2010-10-01 2010-10-01 false Train coordination. 214.325 Section 214.325...
Safety in the mountaineering practices: training in Physical Education

Directory of Open Access Journals (Sweden)

Mónica Palacio

2016-07-01

Full Text Available Physical Education Teaching with Orientation in Regional Mountain Activities at the Universidad Nacional del Comahue (PEF-CRUB-UNCo is the only one in the country that has a history with over 20 years of training physical education teachers with a particular orientation. It was through dynamic and continuous work over the years that theoretical and practical appropriate contents could be defined for this career.(Palacios, Lopez, Schneider, 2011 Coincidences with those experiences made in other countries such as Spain and Germany where the climbing activities are part of the teacher training and educational curricula have been noticed. (Saez Padilla, Gimenez, Fuentes Guerra 2005; Arribas Cubero 2008; Winter, 2000. It was determined together with other authors (Hepp, Güllich and Heidorn, 2001 that the contents related to Trekking and Climbing are the correct ones to develop a Teaching Program with these characteristics. The handling of safety conditions as an educational content is a permanent concern that challenges the activity. This paper will explain the conditions of safety that had been compiled over the years from experience, permanent research, consultation of specialized literature and actions carried out in teacher training
Development of an Evaluation Tool for Online Food Safety Training Programs

Science.gov (United States)

Neal, Jack A., Jr.; Murphy, Cheryl A.; Crandall, Philip G.; O'Bryan, Corliss A.; Keifer, Elizabeth; Ricke, Steven C.

2011-01-01

The objective of this study was to provide the person in charge and food safety instructors an assessment tool to help characterize, identify strengths and weaknesses, determine the completeness of the knowledge gained by the employee, and evaluate the level of content presentation and usability of current retail food safety training platforms. An…
Safety culture in a pharmacy setting using a pharmacy survey on patient safety culture: a cross-sectional study in China.

Science.gov (United States)

Jia, P L; Zhang, L H; Zhang, M M; Zhang, L L; Zhang, C; Qin, S F; Li, X L; Liu, K X

2014-06-30

To explore the attitudes and perceptions of patient safety culture for pharmacy workers in China by using a Pharmacy Survey on Patient Safety Culture (PSOPSC), and to assess the psychometric properties of the translated Chinese language version of the PSOPSC. Cross-sectional study. Data were obtained from 20 hospital pharmacies in the southwest part of China. We performed χ(2) test to explore the differences on pharmacy staff in different hospital and qualification levels and countries towards patient safety culture. We also computed descriptive statistics, internal consistency coefficients and intersubscale correlation analysis, and then conducted an exploratory factor analysis. A test-retest was performed to assess reproducibility of the items. A total of 630 questionnaires were distributed of which 527 were responded to validly (response rate 84%). The positive response rate for each item ranged from 37% to 90%. The positive response rate on three dimensions ('Teamwork', 'Staff Training and Skills' and 'Staffing, Work Pressure and Pace') was higher than that of Agency for Healthcare Research and Quality (AHRQ) data (pculture at different hospital and qualification levels. The internal consistency of the total survey was comparatively satisfied (Cronbach's α=0.89). The results demonstrated that among the pharmacy staffs surveyed in China, there was a positive attitude towards patient safety culture in their organisations. Identifying perspectives of patient safety culture from pharmacists in different hospital and qualification levels are important, since this can help support decisions about action to improve safety culture in pharmacy settings. The Chinese translation of the PSOPSC questionnaire (V.2012) applied in our study is acceptable. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.
30 CFR 57.14214 - Train warnings.

Science.gov (United States)

2010-07-01

... Equipment Safety Practices and Operational Procedures § 57.14214 Train warnings. A warning that is audible above the surrounding noise level shall be sounded— (a) Immediately prior to moving trains; (b) When... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Train warnings. 57.14214 Section 57.14214...
Nuclear Criticality Safety Organization guidance for the development of continuing technical training. Revision 1

International Nuclear Information System (INIS)

Carroll, K.J.; Taylor, R.G.; Worley, C.A.

1997-01-01

The Nuclear Criticality Safety Organization (NCSO) is committed to developing and maintaining a staff of highly qualified personnel to meet the current and anticipated needs in nuclear criticality safety at the Oak Ridge Y-12 Plant and throughout the DOE complex. Continuing technical training is training outside of the initial qualification program to address identified organization-wide needs. Typically, this training is used to improve organization performance in the conduct of business. This document provides guidelines for the development of the technical portions of the Continuing Training Program. It is not a step-by-step procedure, but a collection of considerations to be used during the development process
Safety Training: places available in May 2013

CERN Multimedia

Isabelle CUSATO, HSE Unit

2013-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. May 2013 (alphabetical order) Conduite de chariots élévateurs (driving of forklifts) 06-MAY-13 to 07-MAY-13, 8.30 – 17.30, in French with handouts in English Self Rescue Mask Training 02-MAY-13, 8.30 – 10.00, in English 02-MAY-13, 10.30 – 12.00, in English 07-MAY-13, 8.30 – 10.00, in French 07-MAY-13, 10.30 – 12.00, in English 14-MAY-13, 8.30 – 10.00, in French 14-MAY-13, 10.30 – 12.00, in French 16-MAY-13, 8.30 – 10.00, in English 16-MAY-13, 10.30 – 12.00, in English 21-MAY-13, 8.30 – 10.00, in French 21-MAY-13, 10.30 – 12.00, in French 23-MAY-13, 8.30 – 10.00, in English 23-MAY-13, 10.30 – 12.00, in English 28-MAY-13, 8.30 – 10.00, in French 28-MAY-13, 10.30 – 12.00, in French 30-MAY-1...
Safety Training: places available in January 2013

CERN Document Server

Isabelle CUSATO, HSE Unit

2012-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. January 2013 (alphabetical order) Ergonomics - Applying ergonomic principles in the workplace 24-JAN-13 to 24-JAN-13, 9:00 – 12:00, in English Etre TSO au CERN 23-JAN-13 to 25-JAN-13, 9:00 – 17:30, in French Self-Rescue Mask training 08-JAN-13 to 08-JAN-13, 8:30 – 10:00, in French 08-JAN-13 to 08-JAN-13, 10:30 – 12:00, in French 10-JAN-13 to 10-JAN-13, 8:30 – 10:00, in English 10-JAN-13 to 10-JAN-13, 10:30 – 12:00, in English 15-JAN-13 to 15-JAN-13, 8:30 – 10:00, in French 15-JAN-13 to 15-JAN-13, 10:30 – 12:00, in French 17-JAN-13 to 17-JAN-13, 8:30 – 10:00, in English 17-JAN-13 to 17-JAN-13, 10:30 – 12:00, in English 22-JAN-13 to 22-JAN-13, 8:30 – 10:00, in French 22-JAN-13 to 22-JAN-13, 10:30 – 12:00, in French 24-JAN-13 to 24-JAN-13,...
An Analysis of Trainers' Perspectives within an Ecological Framework: Factors that Influence Mine Safety Training Processes

Directory of Open Access Journals (Sweden)

Emily J. Haas

2014-09-01

Conclusion: This study offers a new technique to identify limitations in safety training systems and processes. The analysis suggests that training should be developed and disseminated with consideration of various levels—individual, interpersonal, organizational, and community—to promote skills. If factors identified within and between levels are addressed, it may be easier to sustain mineworker competencies that are established during safety training.
The West Virginia Occupational Safety and Health Initiative: practicum training for a new marketplace.

Science.gov (United States)

Meyer, J D; Becker, P E; Stockdale, T; Ducatman, A M

1999-05-01

Occupational medicine practice has experienced a shift from larger corporate medical departments to organizations providing services for a variety of industries. Specific training needs will accompany this shift in practice patterns; these may differ from those developed in the traditional industrial or corporate medical department setting. The West Virginia Occupational Health and Safety Initiative involves occupational medicine residents in consultation to a variety of small industries and businesses. It uses the expertise of occupational physicians, health and safety extension faculty, and faculty in engineering and industrial hygiene. Residents participate in multidisciplinary evaluations of worksites, and develop competencies in team-building, workplace health and safety evaluation, and occupational medical consulting. Specific competencies that address requirements for practicum training are used to measure the trainee's acquisition of knowledge and skills. Particular attention is paid to the acquisition of group problem-solving expertise, skills relevant to the current market in practice opportunities, and the specific career interests of the resident physician. Preliminary evaluation indicates the usefulness of training in evaluation of diverse industries and worksites. We offer this program as a training model that can prepare residents for the challenges of a changing marketplace for occupational health and safety services.
Development of the video streaming system for the radiation safety training

International Nuclear Information System (INIS)

Uemura, Jitsuya

2005-01-01

Radiation workers have to receive the radiation safety training every year. It is very hard for them to receive the training within a limited chance of training. Then, we developed the new training system using the video streaming technique and opened the web page for the training on our homepage. Every worker is available to receive the video lecture at any time and at any place by using his PC via internet. After watching the video, the worker should receive the completion examination. It he can pass the examination, he was registered as a radiation worker by the database system for radiation control. (author)
Refresher training as an important factor affecting safety of atomic energy utilization facilities

International Nuclear Information System (INIS)

Kapralov, E.

2005-01-01

Refresher training appears to be one of the most important factors, affecting safety of atomic energy utilization facilities. To provide up-to-date refresher training programs and courses TC NRS implements best training practice based on the actual and perspective Russian national and international norms, regulations, standards and recommendations. (author)
Safer nuclear power. Strengthening training for operational safety at Paks nuclear power plant - Hungary

International Nuclear Information System (INIS)

2003-01-01

For a nuclear power plant, safety must always be paramount. There can be no compromise on safety to meet production targets or to reduce costs. For any reactor, and in particular where older type reactors are in place, their operational safety can be enhanced by upgrading the training of personnel responsible for operating and maintaining the plant. The Department of Technical Co-operation is sponsoring a programme with technical support from the Nuclear Energy and Nuclear Safety Departments to help improve facilities at the PAKS plant in Hungary and establish self sufficiency in training to the highest international standards for all levels of nuclear power plant manpower. The Model Project described will have a direct impact on the improvement of operational safety and performance at PAKS NPP. It will lead to a more efficient use of resources which in turn will result in lower electricity generation costs. The impact of the project is not expected to be limited to Hungary. WWER reactors are common in Eastern Europe and provide one third to one half of the electricity supply to the region. The training programmes and facilities at PAKS offer a possibility in the future to provide training to experts from other countries operating WWER units and serve as a model to be emulated. Slovakia and the Czech Republic have already expressed interest in using the PAKS experience
Safety Training: places available in April

CERN Multimedia

2012-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. April 2012 (alphabetical order) Noise - Understanding the risks 18-APR-12, 10.00 – 12.30, in French Conduite de chariots élévateurs / Driving of forklifts 23-APR-12 to 24-APR-12, 09.00 – 17.30, in French (with possibility to have the handouts in English) First-aiders – Basic course 23-APR-12 to 24-APR-12, 08.30 – 17.30 and 08.30 – 12.30 (total: one day and a half), in French First Aiders - Refresher Course 24-APR-12, 13.30 – 17.30, in French Habilitation électrique personnel non électricien / Habilitation électrique for non electricians 02-APR-12 to 03-APR-12, 09.00 – 17.30 and 09.00 – 12.30 (total: one day and a half), in French Manipulation d’extincteurs : exercices sur feux réels / Use of fire extinguisher ...
Design of 3D simulation engine for oilfield safety training

Science.gov (United States)

Li, Hua-Ming; Kang, Bao-Sheng

2015-03-01

Aiming at the demand for rapid custom development of 3D simulation system for oilfield safety training, this paper designs and implements a 3D simulation engine based on script-driven method, multi-layer structure, pre-defined entity objects and high-level tools such as scene editor, script editor, program loader. A scripting language been defined to control the system's progress, events and operating results. Training teacher can use this engine to edit 3D virtual scenes, set the properties of entity objects, define the logic script of task, and produce a 3D simulation training system without any skills of programming. Through expanding entity class, this engine can be quickly applied to other virtual training areas.

The present condition of the radiation safety control education in training schools for radiological technologists

International Nuclear Information System (INIS)

Takahashi, Yasuyuki; Saito, Kyoko; Hirai, Shoko; Igarashi, Hiroshi; Negishi, Tooru; Hirano, Kunihiro; Kawaharada, Yasuhiro

2010-01-01

We made a detailed study on the course of study in radiation safety control prescribed on March 28, 2003. Questionnaires were sent to 39 training schools for radiological technology, to which 66.7% replied (26/39). Subjects on radiation safety control must include knowledge and technology in both radiation control and medical safety. The contents for instruction of radiation control were in accordance with those given in the traditional program; however, some discrepancies were found in the contents of medical safety. As medical safety, emphasized by the revised Medical Service Law, is regarded as very important by many hospitals, safety control education that include medical ethics should be required as part of the curriculum in the training schools for radiological technologists. (author)
A collaborative effort of medical and educational facilities for radiation safety training of nurses

International Nuclear Information System (INIS)

Matsuda, Naoki; Yoshida, Masahiro; Takao, Hideaki

2005-01-01

The proper understanding of radiation safety by nursing staffs in hospitals are essential not only for radiation protection of themselves against occupational radiation exposure but for quality nursing for patients who receive medical radiation exposure. The education program on radiation in nursing schools in Japan is, however, rather limited, and is insufficient for nurses to acquire basic knowledge of radiation safety and protection. Therefore, the radiation safety training of working nurses is quite important. A hospital-based training needs assignment of radiation technologists and radiologists as instructors, which may result in temporary shortage of these staffs for patients' services. Additionally, the equipments and facilities for radiation training in a hospital might not be satisfactory. In order to provide an effective education regarding radiation for working nurses, the radiation safety training course has been conducted for nurse of the university hospital by the collaboration of medical and educational staffs in Nagasaki University. This course was given for 6 hours in Radioisotope Research Center, a research and education facility for radiation workers using radioisotopes. The curriculum of this course included basics of radiation, effects of radiation on human health, procedures in clinical settings for radiation protection and practical training by using survey meters, which were mainly based on the radiation safety training for beginners according to the Japanese law concerning radiation safety with a modification to focus on medical radiation exposure. This course has been given to approximately 25 nurses in a time, and held 13 times in May 2000 through October 2003 for 317 nurse overall. The pre-instruction questionnaire revealed that 60% of nurses felt fears about radiation diagnosis or therapy, which reduced to less than 15% in the post-instruction surveillance. The course also motivated nurses to give an answer to patients' questions about
Safety Training: Ergonomie - Sensibilisation à l'ergonomie bureautique

CERN Multimedia

2005-01-01

Nous vous proposons une 1/2 journée de sensibilisation sur les risques engendrés par une mauvaise posture lors du travail sur écran (mal de dos, fatigue visuelle, douleurs des poignets...) et des bonnes pratiques pour y remédier. Les prochaines sessions auront lieu le 24 février 2005 (matin et après-midi). Les cours sont pris en charge par la Commission de Sécurité et animés par Pily Clemente et Marion Ribordy de « PM postures ». L'inscription via EDH est obligatoire. Pour plus d'information et inscription par EDH à ce cours, veuillez consulter les pages Formation et Développement (groupe sécurité) de HR, ou contacter l'organisateur. Les places seront attribuées dans l'ordre de réception des inscriptions. Organisateur : Ana-Paula Bernardes/SC-GS (71385) Ana-paula.bernardes@cern.ch FORMATION EN SECURITE SAFETY TRAINING safety.training@ce...
Cernavoda NPP: Training for safety and reliability

International Nuclear Information System (INIS)

Postolache, Laura Lia

2001-01-01

The safe and reliable operation of NPP require successful integration of plant and system design (1), programmes and procedures (2) and qualified human resources (3). Of these three components, station personnel and management have capability to influence and improve programmes and competence of qualified personnel. Qualifying personnel includes selection, training and evaluation that meet the established performance standards. Training, therefore prepares people to achieve such competence. The critical role of operations personnel has been rightly emphasized by every country with a nuclear power programme. So far as operation team is concerned, they have to work, on the one hand with exacting safety rules and at the same time, they have to do the right thing at all times. In essence, they have to be prepared for new, emergency situations as well as for routine work. The plant operation in the Control Room is essentially a man - machine interaction and a safe and reliable operation requires them to take high quality decisions even under stressful conditions. Here lies therefore the need for high competent and licensed operations engineers who will ensure operation within the operating license of the station under the all conditions. The development of a long-term comprehensive training for Operation Staff is a requirement. The program addresses the qualification requirements of the various nuclear positions on shift, the outline content of the required training programs and the evaluation per the Systematic Approach to Training (SAT). A nuclear operator's training begins the moment he/she enters the station. It takes four to six years to develop the skills required to demonstrate that the candidate is an appropriate choice for the position. Then there's a further about two years of intense training at the Training Center on a simulator. After successful completion of the program, the candidate is authorized by the CNCAN (National Commission for Control of Nuclear
EXPERIENCE NETWORKING UNIVERSITY OF EDUCATION TRAINING MASTERS SAFETY OF LIFE

OpenAIRE

Elvira Mikhailovna Rebko

2016-01-01

The article discloses experience networking of universities (Herzen State Pedagogical University and Sakhalin State University) in the development and implementation of joint training programs for master’s education in the field of life safety «Social security in the urban environment». The novelty of the work is to create a schematic design of basic educational training program for master’s education in the mode of networking, and to identify effective instructional techniques and conditions...
Safety Training: "Manual Handling" course in September

CERN Multimedia

Safety Training, HSE Unit

2016-01-01

The next "Manual Handling" course will be given, in French, on 26 September 2016. This course is designed for anyone required to carry out manual handling of loads in the course of their work. The main objective of this course is to adopt and apply the basic principles of physical safety and economy of effort. There are places available. If you are interested in following this course, please fill an EDH training request via our catalogue.
Peer training of safety-related skills to institutional staff: benefits for trainers and trainees.

OpenAIRE

van Den Pol, R A; Reid, D H; Fuqua, R W

1983-01-01

A peer training program, in which experienced staff trained new staff, was evaluated as a method for teaching and maintaining safety-related caregiver skills in an institutional setting for the developmentally disabled. Three sets of safety-type skills were assessed in simulated emergency situations: responding to facility fires, managing aggressive attacks by residents, and assisting residents during convulsive seizures. Using a multiple-baseline research design, results indicated that the p...
78 FR 24751 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2013-04-26

... 14, 2013 (Closed) Place: Embassy Suites, 1900 Diagonal Road, Alexandria, Virginia 22314, Telephone... business and for the study section to consider safety and occupational health-related grant applications...
Occupational risk perception, safety training, and injury prevention: testing a model in the Italian printing industry.

Science.gov (United States)

Leiter, Michael P; Zanaletti, William; Argentero, Piergiorgio

2009-01-01

This study examined occupational risk perception in relation to safety training and injuries. In a printing industry, 350 workers from 6 departments completed a survey. Data analysis showed significant differences in risk perceptions among departments. Differences in risk perception reflected the type of work and the injury incidents in the departments. A structural equation analysis confirmed a model of risk perception on the basis of employees' evaluation of the prevalence and lethalness of hazards as well as the control over hazards they gain from training. The number of injuries sustained was positively related to the perception of risk exposure and negatively related to evaluations about the safety training. The results highlight the importance of training interventions in increasing workers' adoption of safety procedures and prevention of injuries.
A survey of food safety training in small food manufacturers.

Science.gov (United States)

Worsfold, Denise

2005-08-01

A survey of food safety training was conducted in small food manufacturing firms in South Wales. Structured interviews with managers were used to collect information on the extent and level of food hygiene and HACCP training and the manager's perceptions of and attitude towards training. All the businesses surveyed had undertaken some hygiene training. Hygiene induction programmes were often unstructured and generally unrecorded. Low-risk production workers were usually trained on the job whilst high-care production staff were trained in hygiene to Level 1. Part-time and temporary staff received less training than full-timers. Regular refresher training was undertaken by less than half of the sample. None of the businesses made use of National Vocational Qualification (NVQ) qualifications. Over half of the managers/senior staff had undertaken higher levels of hygiene training and half had attended a HACCP course. Managers trained the workforce to operate the HACCP system. Formal training-related activities were generally only found in the larger businesses. Few of the manufacturers had made use of training consultants. Managers held positive attitudes towards training but most regarded it as operating expense rather than an investment. Resource poverty, in terms of time and money was perceived to be a major inhibiting factor to continual, systematic training.
Commuter Train Passenger Safety Model Using Positive Behavior Approach: The Case Study in Suburban Area

Science.gov (United States)

Suryanto, D. A.; Adisasmita, S. A.; Hamid, S.; Hustim, M.

2018-04-01

Currently, Train passanger safety measures are more predominantly measurable using negative dimensions in user mode behavior, such as accident rate, accident intensity and accident impact. This condition suggests that safety improvements aim only to reduce accidents. Therefore, this study aims to measure the safety level of light train transit modes (KRL) through the dimensions of traveling safety on commuters based on positive safety indicators with severel condition departure times and returns for work purposes and long trip rates above KRL. The primary survey were used in data collection methods. Structural Equation Modeling (SEM) were used in data analysis. The results show that there are different models of the safety level of departure and return journey. The highest difference is in the security dimension which is the internal variable of KRL users.
Using a Training Video to Improve Agricultural Workers' Knowledge of On-Farm Food Safety

Science.gov (United States)

Mathiasen, Lisa; Morley, Katija; Chapman, Benjamin; Powell, Douglas

2012-01-01

A training video was produced and evaluated to assess its impact on the food safety knowledge of agricultural workers. Increasing food safety knowledge on the farm may help to improve the safety of fresh produce. Surveys were used to measure workers' food safety knowledge before and after viewing the video. Focus groups were used to determine…
The Hungarian model project: Strengthening training for operational safety at Paks nuclear power plant

International Nuclear Information System (INIS)

Mautner Markhof, F.

1998-01-01

The Hungarian Model project (HMP) reflects the commitment to constant increase of safety and reliability of the NPP Paks, the Government of Hungary and the IAEA. It includes some of the most important nuclear power objectives of Paks NPP, namely the strengthening of NPP personnel training and competence through the application of international best practice, the systematic approach to training (SAT), for training operation and maintenance personnel; setting up a state of-the-art maintenance training center (MTC) at Paks and enhancing safety culture at Paks NPP. The IAEA supported implementation of the HMP through fellowships and scientific visits, expert missions, provision of hardware and software for SAT application, and supply od major new uncontaminated items of actual WWER equipment for the MTC
Identification of training and emergency-planning needs through job-safety analysis

Energy Technology Data Exchange (ETDEWEB)

Veltrie, J.

1987-01-01

Training and emergency-planning needs within the photovoltaic industry may be more accurately determined through the performance of detailed job-safety analysis. This paper outlines the four major components of such an analysis, namely operational review, hazards evaluation, personnel review and resources evaluation. It then shows how these may be developed into coherent training and planning recommendations, for both emergency and non-emergency situations.
Criticality safety training at the Hot Fuel Examination Facility

International Nuclear Information System (INIS)

Garcia, A.S.; Courtney, J.C.; Thelen, V.N.

1983-01-01

HFEF comprises four hot cells and out-of-cell support facilities for the US breeder program. The HFEF criticality safety program includes training in the basic theory of criticality and in specific criticality hazard control rules that apply to HFEF. A professional staff-member oversees the implementation of the criticality prevention program
Medical students' situational motivation to participate in simulation based team training is predicted by attitudes to patient safety.

Science.gov (United States)

Escher, Cecilia; Creutzfeldt, Johan; Meurling, Lisbet; Hedman, Leif; Kjellin, Ann; Felländer-Tsai, Li

2017-02-10

Patient safety education, as well as the safety climate at clinical rotations, has an impact on students' attitudes. We explored medical students' self-reported motivation to participate in simulation-based teamwork training (SBTT), with the hypothesis that high scores in patient safety attitudes would promote motivation to SBTT and that intrinsic motivation would increase after training. In a prospective cohort study we explored Swedish medical students' attitudes to patient safety, their motivation to participate in SBTT and how motivation was affected by the training. The setting was an integrated SBTT course during the surgical semester that focused on non-technical skills and safe treatment of surgical emergencies. Data was collected using the Situational Motivation Scale (SIMS) and the Attitudes to Patient Safety Questionnaire (APSQ). We found a positive correlation between students' individual patient safety attitudes and self-reported motivation (identified regulation) to participate in SBTT. We also found that intrinsic motivation increased after training. Female students in our study scored higher than males regarding some of the APSQ sub-scores and the entire group scored higher or on par with comparable international samples. In order to enable safe practice and professionalism in healthcare, students' engagement in patient safety education is important. Our finding that students' patient safety attitudes show a positive correlation to motivation and that intrinsic motivation increases after training underpins patient safety climate and integrated teaching of patient safety issues at medical schools in order to help students develop the knowledge, skills and attitudes required for safe practice.
Freight-train derailment rates for railroad safety and risk analysis.

Science.gov (United States)

Liu, Xiang; Rapik Saat, M; Barkan, Christopher P L

2017-01-01

Derailments are the most common type of train accident in the United States. They cause damage to infrastructure, rolling stock and lading, disrupt service, and have the potential to cause casualties, and harm the environment. Train safety and risk analysis relies on accurate assessment of derailment likelihood. Derailment rate - the number of derailments normalized by traffic exposure - is a useful statistic to estimate the likelihood of a derailment. Despite its importance, derailment rate analysis using multiple factors has not been previously developed. In this paper, we present an analysis of derailment rates on Class I railroad mainlines based on data from the U.S. Federal Railroad Administration and the major freight railroads. The point estimator and confidence interval of train and car derailment rates are developed by FRA track class, method of operation and annual traffic density. The analysis shows that signaled track with higher FRA track class and higher traffic density is associated with a lower derailment rate. The new accident rates have important implications for safety and risk management decisions, such as the routing of hazardous materials. Copyright © 2016 Elsevier Ltd. All rights reserved.
Education and Training in Radiation, Transport and Waste Safety Newsletter, No. 1, August 2012

International Nuclear Information System (INIS)

2012-08-01

The IAEA has a statutory function to establish standards for the protection of health, life and property against ionizing radiation and to provide for the application of these standards to peaceful nuclear activities. Education and training (E and T) is one of the main mechanisms to provide support to Member States in the application of the standards. In 2000, an internal evaluation of the overall education and training programme was undertaken. The conclusions were that the provision of and support for E and T in Member States tended to be on a reactive rather than proactive basis, contributing to a culture of dependency rather than sustainability. On the basis of this evaluation, a strategic approach to education and training in radiation and waste safety was developed that outlined the objectives and outcomes to be achieved over a ten year period (2001-2010). General Conference Resolutions have underlined or emphasized the importance of sustainable programmes for education and training in radiation, transport and waste safety, and have also welcomed the ongoing commitment of the Secretariat and Member States to the implementation of the strategy. A Steering Committee for Education and Training in Radiation Protection and Waste Safety was established in 2002, with the mission of advising the IAEA on the implementation of the strategy and making recommendations as appropriate. In 2010, the Steering Committee analysed the overall achievement of the strategic approach 2011-2010, refined the vision of the original strategy and redefined the related objectives. The Strategic Approach to Education and Training in Radiation, Transport and Waste Safety (2011-2020) was submitted to the IAEA's policy-making organs and was noted by its Board of Governors in September 2010.
Survey and analysis of radiation safety management systems at medical institutions. Initial report. Radiation protection supervisor, radiation safety organization, and education and training

International Nuclear Information System (INIS)

Ohba, Hisateru; Ogasawara, Katsuhiko; Aburano, Tamio

2005-01-01

In this study, a questionnaire survey was carried out to determine the actual situation of radiation safety management systems in Japanese medical institutions with nuclear medicine facilities. The questionnaire consisted of questions concerning the Radiation Protection Supervisor license, safety management organizations, and problems related to education and training in safety management. Analysis was conducted according to region, type of establishment, and number of beds. The overall response rate was 60%, and no significant difference in response rate was found among regions. Medical institutions that performed nuclear medicine practices without a radiologist participating accounted for 10% of the total. Medical institutions where nurses gave patients intravenous injections of radiopharmaceuticals as part of the nuclear medicine practices accounted for 28% of the total. Of these medical institutions, 59% provided education and training in safety management for nurses. The rate of acquisition of Radiation Protection Supervisor licenses was approximately 70% for radiological technologists and approximately 20% for physicians (regional difference, p=0.02). The rate of medical institutions with safety management organizations was 71% of the total. Among the medical institutions (n=208) without safety management organizations, approximately 56% had 300 beds or fewer. In addition, it became clear that 35% of quasi-public organizations and 44% of private organizations did not provide education and training in safety management (p<0.001, according to establishment). (author)
Patient-led training on patient safety: a pilot study to test the feasibility and acceptability of an educational intervention.

Science.gov (United States)

Jha, V; Winterbottom, A; Symons, J; Thompson, Z; Quinton, N; Corrado, O J; Melville, C; Watt, I; Torgerson, D; Wright, J

2013-09-01

Training in patient safety is an important element of medical education. Most educational interventions on patient safety training adopt a 'health-professional lens' with limited consideration on the impact of safety lapses on the patient and their families and little or no involvement of patients in the design or delivery of the training. This paper describes a pilot study to test the feasibility and acceptability of implementing a patient-led educational intervention to facilitate safety training amongst newly qualified doctors. Patients and/or carers who had experienced harm during their care shared narratives of their stories with trainees; this was followed by a focused discussion on patient safety issues exploring the causes and consequences of safety incidents and lessons to be learned from these. The intervention, which will be further tested in an NIHR-funded randomised controlled trial (RCT), was successfully implemented into an existing training programme and found acceptance amongst the patients and trainees. The pilot study proved to be a useful step in refining the intervention for the RCT including identifying appropriate outcome measures and highlighting organisational issues.

Safety Training: Sensibilisation aux gestes et postures de travail

CERN Multimedia

Laetitia Laddada

2004-01-01

Nous vous proposons un nouveau cours de sécurité lié aux manutentions manuelles (durée 1 jour) : Sensibilisation aux gestes et postures de travail. Si vous êtes amené à manipuler régulièrement des charges lourdes ou volumineuses, cette formation peut vous aider à prévenir les lésions musculaires ou dorsales. A l'issue de cette formation, vous serez capable d'adopter et d'appliquer les principes de base de sécurité physique et d'économie d'efforts dans les manipulations d'objets. Les cours sont pris en charge par la Commission de Sécurité. L'inscription EDH est obligatoire. Pour plus d'information, veuillez consulter les pages Formation & Développement (Groupe Sécurité). Formation & Développement (Groupe Sécurité) FORMATION EN SECURITE SAFETY TRAINING Laetitia Laddada 73811 - 79236 safety.training@cern.ch
Safety Training - places available in October

CERN Multimedia

Isabelle CUSATO, HSE Unit

2012-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. October 2012 (alphabetical order) Conduite de plates-formes élévatrices mobiles de personnel (PEMP) – Cherry-picker driving 08-OCT-12 to 09-OCT-12, 9.00 – 17.30, in French 11-OCT-12 to 12-OCT-12, 9.00 – 17.30, in French 17-OCT-12 to 18-OCT-12, 9.00 – 17.30, in French 29-OCT-12 to 30-OCT-12, 9.00 – 17.30, in French With the possibility to have the handouts in English Echafaudages - Réception, conformité (Scaffolding - reception, conformity) 24-OCT-12 to 26-OCT-12, 8.30 – 17.30, in French (location: Domarin, French department 38) First Aiders - Basic Course 04-OCT-12, 8.30 – 17.30, in English Habilitation électrique personnel non électricien (non electricians) 03-OCT-12 to 04-OCT-12, 9.00 – 17.30 (total 1.5 day), in English...
Safety Training: places available in April 2014

CERN Multimedia

Safety Training team, HSE Unit

2014-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue (see here). April 2014 (alphabetical order) ATEX Habilitation - Level 2 03-APR-14 to 04-APR-14, 9.00 – 17.30, in French Cryogenic Safety - Level 1 10-APR-14, 10.00 – 12.00, in English Electrical Palett Truck – Driving 15-APR-14, 8.30 – 12.30, in French (hand-outs in English for non-French-speaking participants) Fire Extinguisher 09-APR-14, 10.30 – 12.00, in French 16-APR-14, 10.30 – 12.00, in English 23-APR-14, 10.30 – 12.00, in English First Aider - Level 1 – Initial 03-APR-14, 8.30 – 17.30, in French 10-APR-14, 8.30 – 17.30, in English 16-APR-14, 8.30 – 17.30, in English 24-APR-14, 8.30 – 17.30, in English First Aider - Level 1 – Refresher 17-APR-14, 8.30 – 12.30, in English 17-APR-14, 13.30 – 17.30, in...
Education and training requirements in the revised European Basic Safety Standards Directive

International Nuclear Information System (INIS)

Mundigl, S.

2009-01-01

The European Commission is currently developing a modified European Basic Safety Standards Directive covering two major objectives: the consolidation of existing European Radiation Protection legislation, and the revision of the European Basic Safety Standards. The consolidation will merge the following five Directives into one single Directive: the Basic Safety Standards Directive, the Medical Exposures Directive, the Public Information Directive, the Outside Workers Directive, and the Directive on the Control of high-activity sealed radioactive sources and orphan sources. The revision of the European Basic Safety Standards will take account of the latest recommendations by the International Commission on Radiological Protection (ICRP) and shall improve clarity of the requirements where appropriate. It is planned to introduce more binding requirements on natural radiation sources, on criteria for clearance, and on the cooperation between Member States for emergency planning and response, as well as a graded approach for regulatory control. One additional goal is to achieve greater harmonisation between the European BSS and the international BSS. Following a recommendation from the Article 31 Group of Experts, the current draft of the modified BSS will highlight the importance of education and training by dedicating a specific title to radiation protection education, training and information. This title will include a general requirement on the Member States to ensure the establishment of an adequate legislative and administrative framework for providing appropriate radiation protection education, training and information. In addition, there will be specific requirements on training in the medical field, on information and training of workers in general, of workers potentially exposed to orphan sources, and to emergency workers. The revised BSS directive will include requirements on the competence of a radiation protection expert (RPE) and of a radiation protection
Integrating Safety in the Aviation System: Interdepartmental Training for Pilots and Maintenance Technicians

Science.gov (United States)

Mattson, Marifran; Petrin, Donald A.; Young, John P.

2001-01-01

The study of human factors has had a decisive impact on the aviation industry. However, the entire aviation system often is not considered in researching, training, and evaluating human factors issues especially with regard to safety. In both conceptual and practical terms, we argue for the proactive management of human error from both an individual and organizational systems perspective. The results of a multidisciplinary research project incorporating survey data from professional pilots and maintenance technicians and an exploratory study integrating students from relevant disciplines are reported. Survey findings suggest that latent safety errors may occur during the maintenance discrepancy reporting process because pilots and maintenance technicians do not effectively interact with one another. The importance of interdepartmental or cross-disciplinary training for decreasing these errors and increasing safety is discussed as a primary implication.
Safety at your service

CERN Multimedia

Antonella Del Rosso

2014-01-01

You might think that only twelve people to man twelve different services, each needing several people could be a problem. Not for the DGS-SEE-SV Section! We can now reveal their magic formula. From risk management to prevention and follow-up of accidents, from safety training to hunting for pollutants in buildings and providing safety input for calls for tenders, the DGS-SEE-SV’s services underpin virtually every aspect of CERN’s daily life. “The section was set up in 2011 to meet the Organization's needs more effectively", explains François Angerand, head of the DGS-SEE-SV section. "For some activities, such as providing safety input for calls for tenders, our Section acts as an interface between the Departments and all the other services of the HSE Unit. In other cases, we ourselves provide direct support to the Departments.” “Safety” is synonymous with “prevention”: the DGS-...
A Guide to the Design of Occupational Safety and Health Training for Immigrant, Latino/a Dairy Workers.

Science.gov (United States)

Menger, Lauren M; Rosecrance, John; Stallones, Lorann; Roman-Muniz, Ivette Noami

2016-01-01

Industrialized dairy production in the U.S. relies on an immigrant, primarily Latino/a, workforce to meet greater production demands. Given the high rates of injuries and illnesses on U.S. dairies, there is pressing need to develop culturally appropriate training to promote safe practices among immigrant, Latino/a dairy workers. To date, there have been few published research articles or guidelines specific to developing effective occupational safety and health (OSH) training for immigrant, Latino/a workers in the dairy industry. Literature relevant to safety training for immigrant workers in agriculture and other high-risk industries (e.g., construction) was examined to identify promising approaches. The aim of this paper is to provide a practical guide for researchers and practitioners involved in the design and implementation of effective OSH training programs for immigrant, Latino/a workers in the dairy industry. The search was restricted to peer-reviewed academic journals and guidelines published between 1980 and 2015 by universities or extension programs, written in English, and related to health and safety training among immigrant, Latino/a workers within agriculture and other high-risk industries. Relevant recommendations regarding effective training transfer were also included from literature in the field of industrial-organizational psychology. A total of 97 articles were identified, of which 65 met the inclusion criteria and made a unique and significant contribution. The review revealed a number of promising strategies for how to effectively tailor health and safety training for immigrant, Latino/a workers in the dairy industry grouped under five main themes: (1) understanding and involving workers; (2) training content and materials; (3) training methods; (4) maximizing worker engagement; and (5) program evaluation. The identification of best practices in the design and implementation of training programs for immigrant, Latino/a workers within
Education and Training in Radiation, Transport and Waste Safety Newsletter, No. 4, August 2014

International Nuclear Information System (INIS)

2014-08-01

IAEA’s Division of Radiation, Transport and Waste Safety is assisting Member States to develop national strategies for education and training in radiation, transport and waste safety via the regional projects on “Strengthening Education and Training Infrastructure, and Building Competence in Radiation Safety” (RAF/9/04, RAS/9/066, RER/9/109 and RLA/9/070). The regional workshops conducted in 2012 in this area and the results achieved were presented in the previous issues of this newsletter focussing specifically on each region of the Technical Cooperation Programme (Africa, Asia and the Pacific, Europe and Latin America). In the course of 2013, a new cycle of Regional Workshops was conducted. The workshops held in the regions of Africa, Asia and the Pacific, and Europe mainly focussed on Sharing Experience and Progress made in establishing a National Strategy for Education and Training in Radiation, Transport and Waste Safety (pages 2-5). The workshop held in the region of Latin America mainly focussed on Developing and Implementing Education and Training programmes. An overview on the results achieved by participating Member States for the period 2012-2013 is provided
IAEA activities on education and training in radiation and waste safety: Strategic approach for a sustainable system

International Nuclear Information System (INIS)

Mrabit, Khammar; Sadagopan; Geetha

2003-01-01

The statutory safety functions of the International Atomic Energy Agency (IAEA) include the establishment of and provision for the application of safety standards for protection of health, life and property against ionizing radiation. The safety standards are based on the presumption that a national infrastructure is in place enabling the Government to discharge its responsibilities for protection and safety. Education and training is an essential element of the infrastructure. The IAEA education and training activities follows the resolutions of its General Conferences and reflects the latest IAEA standards and guidance. In response to GC(44)/RES/13, the IAEA prepared a 'Strategic Approach to Education and Training in Radiation and Waste Safety' aiming at establishing, by 2010, sustainable education a training programmes in Member States. This Strategy was endorsed by General Conference resolution GC(45)/RES/10C that, inter alia, urged the Secretariat to implement the Strategy on Education and Training and to continue to strengthen, subject to available resources, its current effort in this area, and in particular to assist Member States' national, regional and collaborating centres in conducting such education and training activities in the relevant official languages of the IAEA. In the last General Conference 2002, the IAEA was urged to continue to implement the Strategy, including the convening of the Steering Committee. The first Technical Committee meeting took place during the week 25-29 November 2002. (author)
Improving Chemical Plant Safety Training Using Virtual Reality

OpenAIRE

Nasios, Konstantinos

2002-01-01

The chemical engineering industry often requires people to work in hazardous environments and to operate complicated equipment which often limits the type of training that be carried out on site. The daily job of chemical plant operators is becoming more demanding due to the increasing plant complexity together with increasing requirements on plant safety, production capacity, product quality and cost effectiveness. The importance of designing systems and environments that are as safe as poss...
The Energy-Efficient Operation Problem of a Freight Train Considering Long-Distance Steep Downhill Sections

Directory of Open Access Journals (Sweden)

Xuan Lin

2017-06-01

Full Text Available With the energy consumption rising in rail transport, the railway sector is showing increasing interest in the energy-efficient operation of freight trains. Freight trains require more complicated driving strategies than ordinary passenger trains do due to their heavy loads, especially in the long-distance steep downhill (LDSD sections that are very common in freight rail lines in China. This paper studies the energy-efficient operation of a freight train considering LDSD sections. An optimal control model including regenerative and pneumatic braking is developed for the freight train. Then, when a train leaves/enters the LDSD section, we verify the uniqueness of control transitions and discuss the speed profile linkage between LDSD and its adjacent sections, which indicates that the periodic braking should be applied on LDSD sections for optimality. Additionally, given the same running time for the entire journey, our analysis shows that electrical braking-full braking strategy is more energy-efficient than coasting-full braking strategy on LDSD sections. Finally, a numerical algorithm for the optimal driving solution is proposed. The simulation results demonstrate that the driving strategies generated by the proposed algorithm performs better than those from fuzzy predictive control and field operation regarding energy saving.
49 CFR 214.353 - Training and qualification of roadway workers who provide on-track safety for roadway work groups.

Science.gov (United States)

2010-10-01

... RAILROAD WORKPLACE SAFETY Roadway Worker Protection § 214.353 Training and qualification of roadway workers who provide on-track safety for roadway work groups. (a) The training and qualification of roadway... 49 Transportation 4 2010-10-01 2010-10-01 false Training and qualification of roadway workers who...
Verification of the safety communication protocol in train control system using colored Petri net

International Nuclear Information System (INIS)

Chen Lijie; Tang Tao; Zhao Xianqiong; Schnieder, Eckehard

2012-01-01

This paper deals with formal and simulation-based verification of the safety communication protocol in ETCS (European Train Control System). The safety communication protocol controls the establishment of safety connection between train and trackside. Because of its graphical user interface and modeling flexibility upon the changes in the system conditions, this paper proposes a composition Colored Petri Net (CPN) representation for both the logic and the timed model. The logic of the protocol is proved to be safe by means of state space analysis: the dead markings are correct; there are no dead transitions; being fair. Further analysis results have been obtained using formal and simulation-based verification approach. The timed models for the open transmit system and the application process are created for the purpose of performance analysis of the safety communication protocol. The models describe the procedure of data transmission and processing, and also provide relevant timed and stochastic factors, as well as time delay and lost packet, which may influence the time for establishment of safety connection of the protocol. Time for establishment of safety connection of the protocol in normal state is verified by formal verification, and then time for establishment of safety connection with different probability of lost packet is simulated. After verification it is found that the time for establishment of safety connection of the safety communication protocol satisfies the safety requirements.
Editorial: Advances in healthcare provider and patient training to improve the quality and safety of patient care

OpenAIRE

Elizabeth M. Borycki

2015-01-01

This special issue of the Knowledge Management & E-Learning: An International Journal is dedicated to describing “Advances in Healthcare Provider and Patient Training to Improve the Quality and Safety of Patient Care.” Patient safety is an important and fundamental requirement of ensuring the quality of patient care. Training and education has been identified as a key to improving healthcare provider patient safety competencies especially when working with new technologies such as electronic ...
A Practical Risk Assessment Methodology for Safety-Critical Train Control Systems

Science.gov (United States)

2009-07-01

This project proposes a Practical Risk Assessment Methodology (PRAM) for analyzing railroad accident data and assessing the risk and benefit of safety-critical train control systems. This report documents in simple steps the algorithms and data input...
IAEA education and training in radiation protection, transport and waste safety-status and new developments for sustainability

International Nuclear Information System (INIS)

Sadagopan, G.; Mrabit, K.; Wheatley, J.

2008-01-01

IAEA 's education and training activities in radiation, transport and waste safety follow the IAEA vision, strategy and resolutions of its annual General Conferences and reflect the latest IAEA standards and guidance. IAEA prepared a Strategic Approach to Education and Training in Radiation and Waste Safety (Strategy on Education and Training) aiming at establishing, by 2010, sustainable education and training programmes in Member States, which was endorsed by the GC(45)/RES/10C in 2001. In implementing the strategy, IAEA is organising training events at the regional level and assisting the Member States at the national level by providing them the exemplary quality of training material developed at the IAEA. This work will continue ensuring its completeness in all areas of radiation safety. An Inter Centre Network between the Agency and regional, collaborating national training centres is established to facilitate information exchange, improve communication and dissemination of training material. There is a challenge to enhance the technical capability of the Member States to reach sustainability. This is intended through organising number of Train the Trainers events to develop a pool of qualified trainers. The new developments include establishing E-learning, developing a syllabus for training of Radiation Protection Officers and training materials, information materials for radiation workers. These are aimed at assisting Member States attain self sustainability. (author)
49 CFR 214.345 - Training for all roadway workers.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Training for all roadway workers. 214.345 Section... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD WORKPLACE SAFETY Roadway Worker Protection § 214.345 Training for all roadway workers. The training of all roadway workers shall include, as a minimum, the...
Effect of a manager training and certification program on food safety and hygiene in food service operations.

Science.gov (United States)

Kassa, Hailu; Silverman, Gary S; Baroudi, Karim

2010-05-06

Food safety is an important public health issue in the U.S. Eating at restaurants and other food service facilities increasingly has been associated with food borne disease outbreaks. Food safety training and certification of food mangers has been used as a method for reducing food safety violations at food service facilities. However, the literature is inconclusive about the effectiveness of such training programs for improving food safety and protecting consumer health. The purpose of this study was to examine the effect of food manger training on reducing food safety violations. We examined food inspection reports from the Toledo/Lucas County Health Department (Ohio) from March 2005 through February 2006 and compared food hygiene violations between food service facilities with certified and without certified food managers. We also examined the impact on food safety of a food service facility being part of a larger group of facilities.Restaurants with trained and certified food managers had significantly fewer critical food safety violations but more non-critical violations than restaurants without certified personnel. Institutional food service facilities had significantly fewer violations than restaurants, and the number of violations did not differ as a function of certification. Similarly, restaurants with many outlets had significantly fewer violations than restaurants with fewer outlets, and training was not associated with lower numbers of violations from restaurants with many outlets. The value of having certified personnel was only observed in independent restaurants and those with few branches. This information may be useful in indicating where food safety problems are most likely to occur. Furthermore, we recommend that those characteristics of institutional and chain restaurants that result in fewer violations should be identified in future research, and efforts made to apply this knowledge at the level of individual restaurants.
Training Programs on Radiological Safety for users of Ionizing Radiations in Peru

International Nuclear Information System (INIS)

Medina Gironzini, E.

2003-01-01

In Peru, people who work with ionizing radiations must have an authorization (Individual License) as established in the Radiological Safety Regulations, which are the mandatory rules. The Technical Office of the National Authority (OTAN), which is the technical organ of the Peruvian Institute of Nuclear Energy (IPEN) in charge of controlling radiations within the country , grants the authorization after the candidate demonstrates that he/she knows the specific use of the technique using radiations, as well a s the aspects related to safety and radiological protection. Since it was created in 1972, the Superior Center of Nuclear Studies (VSEN) from IPEN has carried out different training courses so that people can work safety with ionizing radiations in medicine, industry and investigation. The analysis of the radiological safety programs carried out by CSEN during the last 30 years, which allowed the training of more than 2200 people in the country and, at the same time, made possible the securing of the respective Individual License, is presented in this work. The courses, nuclear medicine, radiotherapy, industrial radiography, nuclear gauges gamma irradiator, etc...) and are part of the continuous education program of CSEN. (Author)
Safety Training: places available in March 2013

CERN Multimedia

Isabelle Cusato, HSE Unit

2013-01-01

There are places available in the forthcoming Safety courses. For updates and registration, please refer to the Safety Training Catalogue. March 2013 (alphabetical order) Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (cherry-picker driving) 18-MAR-13 to 19-MAR-13, 8.30 – 17.30, in French with handouts in English First-Aiders – Basic course 14-MAR-13, 8.15 – 17.30, in French 21-MAR-13, 8.15 – 17.30, in English 28-MAR-13, 8.15 – 17.30, in French Habilitation électrique personnel électricien basse et haute tension (habilitation électrique for electricians in low and high voltage) 11-MAR-13 to 22-MAR-13 (total hours : 32), 9.00 – 17.30, in English Habilitation électrique personnel non électricien (electrical habilitation for non electricians) 27-MAR-13 to 28-MAR-13, 9.00 – 17.30, in French Habilitation électrique perso...

Safety Training: places available in June 2013

CERN Multimedia

Isabelle CUSATO, HSE Unit

2013-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. June 2013 (alphabetical order) First Aiders - Basic Course 13-JUN-13, 8.15 – 17.30, in English First Aiders - Refresher Course 06-JUN-13, 8.15 – 12.30, in French 06-JUN-13, 13.15 – 17.30, in French Habilitation ATEX niveau 1 (Habilitation ATEX level 1) 28-JUN-13, 9.00 – 17.30, in French Habilitation électrique personnel électricien basse et haute tensions (habilitation électrique for electricians in low and high voltage) 10-JUN-13 to 13-JUN-13, 9.00 – 17.30, in English Habilitation électrique personnel non électricien (habilitation électrique for non electricians) 03-JUN-13 (afternoon) to 04-JUN-13 (full day), 9.00 – 17.30, in English Laser Experts 03-JUN-13 to 04-JUN-13, 9.00 – 17.30, in English Laser Users 28-JUN-...
The TRIPOD e-learning Platform for the Training of Earthquake Safety Assessment

International Nuclear Information System (INIS)

Coppari, S.; Di Pasquale, G.; Goretti, A.; Papa, F.; Papa, S.; Paoli, G.; Pizza, A. G.; Severino, M.

2008-01-01

The paper summarizes the results of the in progress EU Project titled TRIPOD (Training Civil Engineers on Post-Earthquake Safety Assessment of Damaged Buildings), funded under the Leonardo Da Vinci program. The main theme of the project is the development of a methodology and a learning platform for the training of technicians involved in post-earthquake building safety inspections. In the event of a catastrophic earthquake, emergency building inspections constitute a major undertaking with severe social impact. Given the inevitable chaotic conditions and the urgent need of a great number of specialized individuals to carry out inspections, past experience indicates that inspection teams are often formed in an adhoc manner, under stressful conditions, at a varying levels of technical expertise and experience, sometime impairing the reliability and consistency of the inspection results. Furthermore each Country has its own building damage and safety assessment methodology, developed according to its experience, laws, building technology and seismicity. This holds also for the partners participating to the project (Greece, Italy, Turkey, Cyprus), that all come from seismically sensitive Mediterranean countries. The project aims at alleviating the above shortcomings by designing and developing a training methodology and e-platform, forming a complete training program targeted at inspection engineers, specialized personnel and civil protection agencies. The e-learning platform will provide flexible and friendly authoring mechanisms, self-teaching and assessment capabilities, course and trainee management, etc. Courses will be also made available as stand-alone multimedia applications on CD and in the form of a complete pocket handbook. Moreover the project will offer the possibility of upgrading different experiences and practices: a first step towards the harmonization of methodologies and tools of different Countries sharing similar problems. Finally, through wide
Development of training course for high school 'Safety culture at nuclear facilities of Ukraine'

International Nuclear Information System (INIS)

Begun, V.V.; Shirokov, S.V.

2008-01-01

The content of new training course is considered. The course is introduced on the recommendations of the Institute for National Safety Issues of SNBO of Ukraine. The objective and tasks of the training are presented as a list of future knowledge and skills
Safety Training: places available in February

CERN Multimedia

DGS Unit

2012-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. FEBRUARY 2012 (alphabetical order) Conduite de Plates-Formes Elevatrices Mobiles de Personnel (PEMP) / Cherry-picker driving : 09-FEB-12 au 10-FEB-12, 08.00 – 17.30, in French (with possibility to have handouts in English) Magnetic Fields : 03-FEB-12, 9.30 – 12.00, in French Self-rescue mask : 02-FEB-12, 8.30 – 10.00, in French 02-FEB-12, 10.30 – 12.00, in English 07-FEB-12, 8.30 – 10.00, in French 07-FEB-12, 10.30 – 12.00, in English 14-FEB-12, 8.30 – 10.00, in French 14-FEB-12, 10.30 – 12.00, in English 16-FEB-12, 8.30 – 10.00, in French 16-FEB-12, 10.30 – 12.00, in English 21-FEB-12, 8.30 – 10.00, in French 21-FEB-12, 10.30 – 12.00, in English 28-FEB-12, 8.30 – 10.00, in French 28-FEB-12, 10.30 – 12.00, in English Radiologic...
The operating organization and the recruitment, training and qualification of personnel for research reactors. Safety guide

International Nuclear Information System (INIS)

2008-01-01

This Safety Guide provides recommendations on meeting the requirements on the operating organization and on personnel for research reactors. It covers the typical operating organization for research reactor facilities; the recruitment process and qualification in terms of education, training and experience; programmes for initial and continuing training; the authorization process for those individuals having an immediate bearing on safety; and the processes for their requalification and reauthorization
Official communication of the Safety Commission

CERN Multimedia

DG Unit

2009-01-01

The Prevention and Training section of the Safety Commission, would like to inform you that the new Safety Awareness course for newcomers will replace the welcome video in building 55 as of 2 April. The 3 levels (‘Safety at CERN’, ‘General Risks’ and ‘Specific Risks’) followed by 3 tests will determine access to CERN. Thanks to the SIR (Safety Information Registration, http://sir.cern.ch) application, it will be possible for you to follow the awareness course from your computer. For more information, go to the Safety Commission web site: http://safety-commission.web.cern.ch
Official communication of the Safety Commission

CERN Multimedia

DG Unit

2009-01-01

We, the Prevention and Training section of the Safety Commission, would like to inform you that the new Safety Awareness course for newcomers will replace the welcome video in building 55 as of the 2nd April. The 3 levels (‘Safety at CERN’, ‘General Risks’ and ‘Specific Risks’) followed by 3 tests will determine access to CERN. Thanks to the SIR (Safety Information Registration, http://sir.cern.ch) application, it will be possible for you to follow the awareness course from your computer. For more information, go to the Safety Commission web site: http://safety-commission.web.cern.ch
Management of safety and safety culture at the NPPs of Ukraine

International Nuclear Information System (INIS)

Koltakov, Vladimir

2002-01-01

The report contains general aspects of safety and safety culture. The brief description of operational characteristics and basic indexes of atomic power plants at the Ukraine are represented. The information referring to structure of NPPs of Operation organization license-holder, safety responsibility of both Regulatory and Utility Bodies also is given. The main part of the report include seven sections: 1. Practical application of safety management models; 2. erspective on the relationship between safety management and safety culture; 3. The role of leadership in achieving high standards of safety; 4. Current and future challengers that impact on safety culture and safety management (e.g. the impact of competition, changing, economic and political circumstances, workforce demographics, etc.); 5. Key lessons learned from major events; 6. Practical applications of safety culture concepts (e.g. learning organizations, training staff communications, etc.); 7. dvance in human performance. Some of the main pending safety and safety culture problems that are necessary to achieve in the near future are mentioned
The European Nuclear Safety Training and Tutoring Institute (ENSTTI). Annex III [Example of Knowledge Management and Training for TSOs

International Nuclear Information System (INIS)

2018-01-01

ENSTTI is an initiative of members of the ETSON. It was created in 2010 to put in place a high quality training mechanism to meet the training needs of experts at nuclear regulatory authorities and TSOs; to ensure the continuous development of qualified experts in this area; and to foster harmonization of technical practices in nuclear safety, nuclear security and radiation protection. This is achieved through the regular provision of vocational training and tutoring exclusively delivered by senior professionals of European TSOs that take into consideration the latest technical developments and is continuously up-dated and improved by applying a systematic approach to training.
20 CFR 641.660 - Who is eligible to participate in section 502(e) private sector training activities?

Science.gov (United States)

2010-04-01

...(e) private sector training activities? 641.660 Section 641.660 Employees' Benefits EMPLOYMENT AND... PROGRAM Private Sector Training Projects Under Section 502(e) of the OAA § 641.660 Who is eligible to participate in section 502(e) private sector training activities? The same eligibility criteria used in the...
Training courses on integrated safety assessment modelling for waste repositories

International Nuclear Information System (INIS)

Mallants, D.

2007-01-01

Near-surface or deep repositories of radioactive waste are being developed and evaluated all over the world. Also, existing repositories for low- and intermediate-level waste often need to be re-evaluated to extend their license or to obtain permission for final closure. The evaluation encompasses both a technical feasibility as well as a safety analysis. The long term safety is usually demonstrated by means of performance or safety assessment. For this purpose computer models are used that calculate the migration of radionuclides from the conditioned radioactive waste, through engineered barriers to the environment (groundwater, surface water, and biosphere). Integrated safety assessment modelling addresses all relevant radionuclide pathways from source to receptor (man), using in combination various computer codes in which the most relevant physical, chemical, mechanical, or even microbiological processes are mathematically described. SCK-CEN organizes training courses in Integrated safety assessment modelling that are intended for individuals who have either a controlling or supervising role within the national radwaste agencies or regulating authorities, or for technical experts that carry out the actual post-closure safety assessment for an existing or new repository. Courses are organised by the Department of Waste and Disposal
Maximising harm reduction in early specialty training for general practice: validation of a safety checklist.

Science.gov (United States)

Bowie, Paul; McKay, John; Kelly, Moya

2012-06-21

Making health care safer is a key policy priority worldwide. In specialty training, medical educators may unintentionally impact on patient safety e.g. through failures of supervision; providing limited feedback on performance; and letting poorly developed behaviours continue unchecked. Doctors-in-training are also known to be susceptible to medical error. Ensuring that all essential educational issues are addressed during training is problematic given the scale of the tasks to be undertaken. Human error and the reliability of local systems may increase the risk of safety-critical topics being inadequately covered. However adherence to a checklist reminder may improve the reliability of task delivery and maximise harm reduction. We aimed to prioritise the most safety-critical issues to be addressed in the first 12-weeks of specialty training in the general practice environment and validate a related checklist reminder. We used mixed methods with different groups of GP educators (n=127) and specialty trainees (n=9) in two Scottish regions to prioritise, develop and validate checklist content. Generation and refinement of checklist themes and items were undertaken on an iterative basis using a range of methods including small group work in dedicated workshops; a modified-Delphi process; and telephone interviews. The relevance of potential checklist items was rated using a 4-point scale content validity index to inform final inclusion. 14 themes (e.g. prescribing safely; dealing with medical emergency; implications of poor record keeping; and effective & safe communication) and 47 related items (e.g. how to safety-net face-to-face or over the telephone; knowledge of practice systems for results handling; recognition of harm in children) were judged to be essential safety-critical educational issues to be covered. The mean content validity index ratio was 0.98. A checklist was developed and validated for educational supervisors to assist in the reliable delivery of
Criticality safety assessment of FBTR fuel sub-assemblies using WIMS cross section set

International Nuclear Information System (INIS)

Gupta, H.C.; Chakraborty, B.

2002-01-01

Full text: FBTR's irradiated fuel sub-assemblies (FSAs) are sent to RML at Indira Gandhi Centre for Atomic Research for post irradiation examination. The FSAs are cut open and the fuel pins are separated for examination in the hot cells. It was required to evaluate the criticality safety in handling the FSAs in the hot cells. Criticality safety studies for handling two as well as three irradiated FSAs in the hot cells under dry conditions were carried out by the Safety Group at IGCAR, Kalpakkam. Monte Carlo code KENO (Version Va) which uses 16-group Hansen-Roach cross-section set was used for the calculations. Subsequently, during the safety review of the proposition by the Safety Review Committee (SARCOP) of AERB, it was stipulated to carry out the criticality safety studies under flooded condition also. We carried out the criticality safety studies for these fuel sub assemblies in different configurations under dry (buried in concrete) as well as wet condition (flooded with light water) using Monte Carlo codes MONALI (developed at BARC) and KENO4 using WlMS-69 group cross section set. Results of our analyses under various conditions are presented in this paper
Artificial intelligence and training of nuclear reactor personnel

International Nuclear Information System (INIS)

Uhrig, R.E.; Buenaflor, M.T.

1987-01-01

Expert computer systems offer an excellent and effective means to reduce the potential for operator error, and improve plant safety and reliability. For the training field the benefits are twofold. First, the inclusion of advisory expert systems in the control environments (the physical control room and its simulator) offer a continuous source of on-the-job diagnostic training. Second, expert systems specifically designed for training are feasible for specialized license/requalification training in higher order analytical skills. This paper consists of two parts. In the first section, the improvements for on-the-job training are examined. In the second section, the benefits for the overall training program are explored in terms of technical and educational rationales
Innovative approach to training radiation safety regulatory professionals

International Nuclear Information System (INIS)

Gilley, Debbie Bray

2008-01-01

Full text: The supply of human resources required to adequately manage a radiation safety regulatory program has diminished in the last five years. Competing professional opportunities and a reduction in the number of health physics secondary schools have made it necessary to look at alternative methods of training. There are limited educational programs in the US that prepare our professionals for careers in the Radiation Regulatory Programs. The state of Florida's radiation control program embraced a new methodology using a combination of didactic and work experience using qualification journals, subject matter experts, and formalized training to develop a qualified pool of employees to perform the regulatory functions and emergency response requirements of a state radiation control program. This program uses a task-based approach to identify training needs and draws upon current staff to develop and implement the training. This has led to a task-oriented staff capable of responding to basic regulatory and emergency response activities within one year of employment. Florida's program lends itself to other states or countries with limited resources that have experienced staff attrition due to retirement or competing employment opportunities. Information on establishing a 'task-based' pool of employees that can perform basic regulatory functions and emergency response after one year of employment will be described. Initial task analysis of core functions and methodology is used to determine the appropriate training methodology for these functions. Instructions will be provided on the methodology used to 'mentor' new employees and then incorporate the new employees into the established core functions and be a useful employee at the completion of the first year of employment. New training philosophy and regime may be useful in assisting in the development of programs in countries and states with limited resources for training radiation protection personnel. (author)
Evaluating SafeClub: can risk management training improve the safety activities of community soccer clubs?

Science.gov (United States)

Abbott, K; Klarenaar, P; Donaldson, A; Sherker, S

2008-06-01

To evaluate a sports safety-focused risk-management training programme. Controlled before and after test. Four community soccer associations in Sydney, Australia. 76 clubs (32 intervention, 44 control) at baseline, and 67 clubs (27 intervention, 40 control) at post-season and 12-month follow-ups. SafeClub, a sports safety-focused risk-management training programme (3x2 hour sessions) based on adult-learning principles and injury-prevention concepts and models. Changes in mean policy, infrastructure and overall safety scores as measured using a modified version of the Sports Safety Audit Tool. There was no significant difference in the mean policy, infrastructure and overall safety scores of intervention and control clubs at baseline. Intervention clubs achieved higher post-season mean policy (11.9 intervention vs 7.5 controls), infrastructure (15.2 vs 10.3) and overall safety (27.0 vs 17.8) scores than did controls. These differences were greater at the 12-month follow-up: policy (16.4 vs 7.6); infrastructure (24.7 vs 10.7); and overall safety (41.1 vs 18.3). General linear modelling indicated that intervention clubs achieved statistically significantly higher policy (prisk-management practice, in a sustainable way.
Safety culture in nuclear installations. Management of safety and safety culture in Indian NPPs

International Nuclear Information System (INIS)

Rawal, S.C.

2002-01-01

Nuclear Power Corporation Of India Ltd. (NPCIL) is a company owned by Government of India and is responsible for Design, Construction, Commissioning, Operation and Decommissioning of Nuclear Power plants in India. Presently, a total of 13 Nuclear power Stations are in operation with an installed capacity of 2620 MWe and 2 VVR type PWR Units of 1000 MWe capacity each, 2 PHWR type units of 500 MWe capacity each and 4 PHWR type 220 MWe capacity each are under construction. NPPs generation capacity has been increased from 70% to 85% in the span Of last 7 years with high level of safety standards. This could be achieved through Management commitment towards building a strong Safety Culture. Safety culture is that assembly of characteristics and attitudes in organisation and individuals which establishes that as an overriding priority nuclear plant safety issues receives the attention warranted by their significance. This definition of safety culture brings out two major components in its manifestation. The framework within which individuals within the organisation works.The attitude and response of individual towards the safety issues over productivity and economics in the organisational work practices. The two attributes of safety culture are built in and upgraded in each individuals through special training at the time of entry in the organisation and later through in built procedures in the work practices, motivation and encouragement for free participation of each individuals. Individuals are encouraged to participate in Quality circle teams at the sectional level and review of safety proposal originated by individuals in Station operation Review Committee at Station level, in addition to this to continuously enhance the safety culture, refresher training courses are being organised at regular intervals. The safety related proposals are categorised in to two namely: Proposals from Operating Plants, and Proposals from projects and Design. The concept of safety
IAEA Activities on Education and training in Radiation and Waste Safety: Strategic approach for a sustainable system

International Nuclear Information System (INIS)

Marabit, K.; Sadagopan, G.

2003-01-01

The statutory safety functions of the International Atomic Energy(IAEA) include the establishment of and provision for the application of safety standards for protection of health, life and property against ionizing radiation. The safety standards are based on the presumption that a national infrastructure is in place, enabling the Government to discharge its responsibilities for protection and safety. Education and training is an essential element of the infrastructure. the IAEA education and training activities follow the resolutions of its General Conference and reflect the latest IAEA standards and guidance. Several General Conference resolutions have emphasized the importance of education and training (e. g. GC(XXXV)/RES/552 in 1991; GC(XXXVI)/RES/584 in 1992; GC(43)/RES/13 in 1999 and more recently GC(44)/RES/13 in 2000). In response to GC(44)/RES/13, the IAEA prepared a Strategic Approach to Education and Training in Radiation and Waste Safety (Strategy on Education and Training) aiming at establishing, by 2010, sustainable education and training programmes in its Member States. This Strategy was endorsed by the General Conference resolution GC(45)/RES/10C that, inter alia, urged the Secretariat to implement the Strategy on Education and Training, and to continue to strengthen, subject to available resources, its current effort in this area, and in particular to assist Member States national, regional and collaborating centres in conducting such education and training activities in the relevant official languages of the IAEA. A technical meeting was held in Vienna in March 2002 and concluded with an action plan for implementing the strategy up to 2010, the immediate action being the formation of a Steering Committee by the middle of 2002. This Steering Committee has the general remit to advise on the development and implementation of the strategy, as well as monitoring its progress. The first technical meeting of the Steering Committee took place on 25
Radiological Emergency Response Health and Safety Manual

Energy Technology Data Exchange (ETDEWEB)

D. R. Bowman

2001-05-01

This manual was created to provide health and safety (H&S) guidance for emergency response operations. The manual is organized in sections that define each aspect of H and S Management for emergency responses. The sections are as follows: Responsibilities; Health Physics; Industrial Hygiene; Safety; Environmental Compliance; Medical; and Record Maintenance. Each section gives guidance on the types of training expected for managers and responders, safety processes and procedures to be followed when performing work, and what is expected of managers and participants. Also included are generic forms that will be used to facilitate or document activities during an emergency response. These ensure consistency in creating useful real-time and archival records and help to prevent the loss or omission of information.
42 CFR 86.10 - Nature and purpose of training grants.

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Nature and purpose of training grants. 86.10 Section 86.10 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL... AND HEALTH Occupational Safety and Health Training Grants § 86.10 Nature and purpose of training...

30 CFR 46.11 - Site-specific hazard awareness training.

Science.gov (United States)

2010-07-01

... Section 46.11 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR EDUCATION AND... workers; (4) Customers, including commercial over-the-road truck drivers; (5) Construction workers or... procedures. The training must address site-specific health and safety risks, such as unique geologic or...
Safety Training: places available in April 2013

CERN Multimedia

Isabelle CUSATO, HSE Unit

2013-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. April 2013 (alphabetical order) Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (cherry-picker driving) 15-APR-13 to 16-APR-13, 8.30 – 17.30, in French, with handouts in English Être TSO au CERN 09-APR-13 to 11-APR-13, 9.00 – 17.30, in French First-Aiders – Basic Course 18-APR-13, 8.15 – 17.30, in French First-Aiders – Refresher Course 04-APR-13, 8.15 – 12.30, in French 04-APR-13, 13.15 – 17.30, in French Habilitation ATEX niveau 2 (ATEX habilitation level 2) 11-APR-13 to 12-APR-13, 9.00 – 17.30, in French Habilitation électrique personnel électricien basse tension (electricial habilitation for electricians in low voltage) 08-APR-13 to 10-APR-13, 9.00 – 17.30, in French Habilitation &eac...
Safety Training: places available in September 2013

CERN Document Server

Isabelle Cusato, HSE Unit

2013-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. September 2013 (alphabetical order) Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (Cherry-picker driving) 12-SEP-13 au 13-SEP-13, 8.30 – 17.30, in French with handouts in English Ergonomics - Applying ergonomic principles in the workplace 19-SEP-13, 9.00 – 12.00, in French Être TSO au CERN (Being TSO at CERN) 10-SEP-13 to 12-SEP-13, 8.30 – 17.30, in French Habilitation ATEX - niveau 2 (ATEX habilitation - level 2) 19-SEP-13 to 20-SEP-13, 9.00 – 17.30, in French Habilitation électrique personnel électricien basse tension (electrical habilitation for electricians in low voltage) 11-SEP-13 to 13-SEP-13, 9.00 – 17.30, in English 23-SEP-13 to 25-SEP-13, 9.00 – 17.30, in French Habilitation électrique personnel non &eacut...
Safety Training: places available in February 2014

CERN Multimedia

The Safety Training Team, HSE Unit

2014-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue (see here). February 2014 (alphabetical order) ATEX Habilitation - Level 1 04-FEB-14, 9.00 – 17.30, in French Electrical Work - Lock-out 05-FEB-14, 13.30 – 17.30, in French Ergonomics – Office 06-FEB-14, 9.00 – 12.00, in English Fire Extinguisher 26-FEB-14, 10.30 – 12.00, in French 05-FEB-14, 10.30 – 12.00, in English First Aider - Level 1 – Initial 20-FEB-14, 8.30 – 17.30, in French First Aider - Refresher 06-FEB-14, 8.30 – 12.30, in French 06-FEB-14, 13.30 – 17.30, in French 13-FEB-14, 8.30 – 12.30, in English 13-FEB-14, 13.30 – 17.30, in English Habilitation électrique - Electrician Low Voltage – Initial 10-FEB-14 to 12-FEB-14, 9.00 – 17.30, in French Habilitation électrique - Electrician ...
Safety Training: places available in March 2014

CERN Multimedia

Safety Training team, HSE Unit

2014-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue (see here). March 2014 (alphabetical order) Ergonomics - Worksite and Workshop 24-MAR-14, 9.00 – 17.30, in French Fire Extinguisher 05-MAR-14, 10.30 – 12.00, in French 12-MAR-14, 8.30 – 10.00, in English 12-MAR-14, 10.30 – 12.00, in English First Aider - Level 1 – Initial 27-MAR-14, 8.30 – 17.30, in English First Aider – Refresher 20-MAR-14, 8.30 – 12.30, in French 20-MAR-14, 13.30 – 17.30, in French Habilitation électrique - Electrician Low Voltage – Initial 17-MAR-14 to 19-MAR-14, 9.00 – 17.30, in French 24-MAR-14 to 26-MAR-14, 9.00 – 17.30, in English Habilitation électrique - Electrician Low and High Voltage – Initial 18-MAR-14 to 21-MAR-14, 9.00 – 17.30, in English Habilitation &eacut...
Safety Training: places available in January 2014

CERN Multimedia

Safety Training Team, HSE Unit

2014-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue (see here). January 2014 (alphabetical order) Confined space 28-JAN-14, 9.00 – 17.30, in French Ergonomics – Office 30-JAN-14, 9.00 – 12.00, in French Fire Extinguisher 08-JAN-14, 10.30 – 12.00, in French 24-JAN-14, 10.30 – 12.00, in English 31-JAN-14, 10.30 – 12.00, in French First Aider - Level 1 – Initial 16-JAN-14, 8.30 – 17.30, in French 30-JAN-14, 8.30 – 17.30, in French First Aider – Refresher 09-JAN-14, 8.30 – 12.30, in French 09-JAN-14, 13.30 – 17.30, in French Habilitation électrique - Electrician Low Voltage - Initial 22-JAN-14 au 24-JAN-14, 9.00 – 17.30, in English Habilitation électrique - Electrician Low and High Voltage - Initial 28-JAN-14 au 31-JAN-14, 9.00 – 17.30, in French ...
Safety Training: places available in January 2014

CERN Document Server

Safety Training Team, HSE Unit

2013-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue (see here). January 2014 (alphabetical order) Confined space 28-JAN-14, 9.00 – 17.30, in French Ergonomics – Office 30-JAN-14, 9.00 – 12.00, in French Fire Extinguisher 08-JAN-14, 10.30 – 12.00, in French 24-JAN-14, 10.30 – 12.00, in English 31-JAN-14, 10.30 – 12.00, in French First Aider - Level 1 – Initial 16-JAN-14, 8.30 – 17.30, in French 30-JAN-14, 8.30 – 17.30, in French First Aider – Refresher 09-JAN-14, 8.30 – 12.30, in French 09-JAN-14, 13.30 – 17.30, in French Habilitation électrique - Electrician Low Voltage - Initial 22-JAN-14 au 24-JAN-14, 9.00 – 17.30, in English Habilitation électrique - Electrician Low and High Voltage - Initial 28-JAN-14 au 31-JAN-14, 9.00 – 17.30, in French ...
SU-D-201-07: A Survey of Radiation Oncology Residents’ Training and Preparedness to Lead Patient Safety Programs in Clinics

International Nuclear Information System (INIS)

Spraker, M; Nyflot, M; Ford, E; Kane, G; Zeng, J; Hendrickson, K

2016-01-01

Purpose: Safety and quality has garnered increased attention in radiation oncology, and physicians and physicists are ideal leaders of clinical patient safety programs. However, it is not clear whether residency programs incorporate formal patient safety training and adequately equip residents to assume this leadership role. A national survey was conducted to evaluate medical and physics residents’ exposure to safety topics and their confidence with the skills required to lead clinical safety programs. Methods: Radiation oncology residents were identified in collaboration with ARRO and AAPM. The survey was released in February 2016 via email using REDCap. This included questions about exposure to safety topics, confidence leading safety programs, and interest in training opportunities (i.e. workshops). Residents rated their exposure, skills, and confidence on 4 or 5-point scales. Medical and physics residents responses were compared using chi-square tests. Results: Responses were collected from 56 of 248 (22%) physics and 139 of 690 (20%) medical residents. More than two thirds of all residents had no or only informal exposure to incident learning systems (ILS), root cause analysis (RCA), failure mode and effects analysis (FMEA), and the concept of human factors engineering (HFE). Likewise, 63% of residents had not heard of RO-ILS. Response distributions were similar, however more physics residents had formal exposure to FMEA (p<0.0001) and felt they were adequately trained to lead FMEAs in clinic (p<0.001) than medical residents. Only 36% of residents felt their patient safety training was adequate, and 58% felt more training would benefit their education. Conclusion: These results demonstrate that, despite increasing desire for patient safety training, medical and physics residents’ exposure to relevant concepts is low. Physics residents had more exposure to FMEA than medical residents, and were more confident in leading FMEA. This suggests that increasing
SU-D-201-07: A Survey of Radiation Oncology Residents’ Training and Preparedness to Lead Patient Safety Programs in Clinics

Energy Technology Data Exchange (ETDEWEB)

Spraker, M; Nyflot, M; Ford, E; Kane, G; Zeng, J; Hendrickson, K [University of Washington, Seattle, WA (United States)

2016-06-15

Purpose: Safety and quality has garnered increased attention in radiation oncology, and physicians and physicists are ideal leaders of clinical patient safety programs. However, it is not clear whether residency programs incorporate formal patient safety training and adequately equip residents to assume this leadership role. A national survey was conducted to evaluate medical and physics residents’ exposure to safety topics and their confidence with the skills required to lead clinical safety programs. Methods: Radiation oncology residents were identified in collaboration with ARRO and AAPM. The survey was released in February 2016 via email using REDCap. This included questions about exposure to safety topics, confidence leading safety programs, and interest in training opportunities (i.e. workshops). Residents rated their exposure, skills, and confidence on 4 or 5-point scales. Medical and physics residents responses were compared using chi-square tests. Results: Responses were collected from 56 of 248 (22%) physics and 139 of 690 (20%) medical residents. More than two thirds of all residents had no or only informal exposure to incident learning systems (ILS), root cause analysis (RCA), failure mode and effects analysis (FMEA), and the concept of human factors engineering (HFE). Likewise, 63% of residents had not heard of RO-ILS. Response distributions were similar, however more physics residents had formal exposure to FMEA (p<0.0001) and felt they were adequately trained to lead FMEAs in clinic (p<0.001) than medical residents. Only 36% of residents felt their patient safety training was adequate, and 58% felt more training would benefit their education. Conclusion: These results demonstrate that, despite increasing desire for patient safety training, medical and physics residents’ exposure to relevant concepts is low. Physics residents had more exposure to FMEA than medical residents, and were more confident in leading FMEA. This suggests that increasing
Nuclear Criticality Safety Organization qualification program. Revision 4

International Nuclear Information System (INIS)

Carroll, K.J.; Taylor, R.G.; Worley, C.A.

1997-01-01

The Nuclear Criticality Safety Organization (NCSO) is committed to developing and maintaining a staff of highly qualified personnel to meet the current and anticipated needs in Nuclear Criticality Safety (NCS) at the Oak Ridge Y-12 Plant. This document defines the Qualification Program to address the NCSO technical and managerial qualification as required by the Y-12 Training Implementation Matrix (TIM). It is implemented through a combination of LMES plant-wide training courses and professional nuclear criticality safety training provided within the organization. This Qualification Program is applicable to technical and managerial NCSO personnel, including temporary personnel, sub-contractors and/or LMES employees on loan to the NCSO, who perform the NCS tasks or serve NCS-related positions as defined in sections 5 and 6 of this program
Section 60 revisited (The Ontario Electrical Safety Code)

Energy Technology Data Exchange (ETDEWEB)

Olechna, T.

2003-06-01

Recent changes to the Ontario Electrical Safety Code (OESC), specifically the deletion of Section 60, Electrical Communication Systems, are discussed in an effort to explain the history behind the decision and the time frame of the changes. Communication systems include telephone, telegraph, data communications, intercommunications, wired music and paging systems. In brief, the deletion of Section 60 occurred in 1983, and resulted from the fact that communication-type wiring was historically the property of the communications utility and under federal jurisdiction. Since such equipment was under federal jurisdiction, they were not inspected in Ontario, hence the deletion of Section 60 from the Ontario Code. It should be noted that although Section 60 is deleted, a number of rules applicable to communications circuits are spread throughout various sections of the Code, notably in Rule 1-032 dealing with damage and interference, Rule 4-022 involving harmonics issues, Rule 12-904(2) regulates the use of conductors that are of different sources of voltage, and Rule 10-708 which specifies the spacing and bonding requirements for communications systems. The end result is that even though Section 60 was deleted, there are these and other rules in the OESC that have direct impact on communications circuits and in effect help to protect the integrity of the system.
Nurse Level of Education, Quality of Care and Patient Safety in the Medical and Surgical Wards in Malaysian Private Hospitals: A Cross-sectional Study.

Science.gov (United States)

Abdul Rahman, Hamzah; Jarrar, Mu'taman; Don, Mohammad Sobri

2015-04-23

Nursing knowledge and skills are required to sustain quality of care and patient safety. The numbers of nurses with Bachelor degrees in Malaysia are very limited. This study aims to predict the impact of nurse level of education on quality of care and patient safety in the medical and surgical wards in Malaysian private hospitals. A cross-sectional survey by questionnaire was conducted. A total 652 nurses working in the medical and surgical wards in 12 private hospitals were participated in the study. Multistage stratified simple random sampling performed to invite nurses working in small size (less than 100 beds), medium size (100-199 beds) and large size (over than 200) hospitals to participate in the study. This allowed nurses from all shifts to participate in this study. Nurses with higher education were not significantly associated with both quality of care and patient safety. However, a total 355 (60.9%) of respondents participated in this study were working in teaching hospitals. Teaching hospitals offer training for all newly appointed staff. They also provide general orientation programs and training to outline the policies, procedures of the nurses' roles and responsibilities. This made the variances between the Bachelor and Diploma nurses not significantly associated with the outcomes of care. Nursing educational level was not associated with the outcomes of care in Malaysian private hospitals. However, training programs and the general nursing orientation programs for nurses in Malaysia can help to upgrade the Diploma-level nurses. Training programs can increase their self confidence, knowledge, critical thinking ability and improve their interpersonal skills. So, it can be concluded that better education and training for a medical and surgical wards' nurses is required for satisfying client expectations and sustaining the outcomes of patient care.
Safety Training: Ergonomie - sensibilisation à l'ergonomie bureautique - French version only

CERN Multimedia

Laetitia Laddada

2004-01-01

Nous vous proposons une 1/2 journée de sensibilisation sur les risques engendrés par une mauvaise posture lors du travail sur écran (mal de dos, fatigue visuelle, douleurs des poignets...) et des bonnes pratiques pour y remédier. Les prochaines sessions auront lieu le 8 juillet 2004. Les cours sont pris en charge par la Commission de Sécurité et animés par Clemente Pilly et Ribordy Marion de « PM postures ». L'inscription via EDH est obligatoire. Pour plus d'information et inscription par EDH à ce cours, veuillez consulter les pages Formation et Développement (groupe sécurité) de HR, ou contacter l'organisateur. Les places seront attribuées dans l'ordre de réception des inscriptions. Organisateur : Ana-Paula Bernardes/SC-GS (71385) Ana-paula.bernardes@cern.ch Formation en SECURITE SAFETY Training Laetitia Laddada 73811 - 79236 safety.training@cern.ch
Safety first: oilfield jobs sometimes go begging, but smart recruits pause for some training

Energy Technology Data Exchange (ETDEWEB)

Mowers, J.

2000-05-01

Occupational health and safety training available to prospective oilfield workers through the Petroleum Industry Training Service is discussed. The pre-employment program at PITS has been developed by the Canadian Association of Oilwell Drilling Contractors; about 240 students go through the program in an ordinary year. Training is done at the Nisku Campus of PITS and a second rig is waiting on standby for training at the site of the Leduc discovery near Devon. With both rigs in action, PITS will have the capacity to train up to 1,000 new hands a year. The course is also offered in Calgary where PITS is headquartered. The training is rigorous and hands-on; when not on the rig floor, students learn about off-the-rig jobs, such as mixing mud, packing gel, greasing, and digging ditches, in addition to more traditional 'book learning' about hydrogen sulphide, workplace hazardous materials, standard first aid and CPR. In addition to the pre-employment health and safety course, PITS also offers pre-employment programs for operators of production sites, including hands-on experience with an oil battery and gas plant at the Nisku campus. The pre-employment programs are supplementary to some 120 specialized course offered by PITS at Calgary and at numerous colleges and field locations.
Health and safety at DNE [Dounreay Nuclear Power Development Establishment

International Nuclear Information System (INIS)

Walford, J.G.; Tyler, G.R.

1988-11-01

This report reviews health and safety experience at the UKAEA's Dounreay Nuclear Power Development Establishment for 1986 and gives relevant data in the fields of health physics and general safety. It includes sections on: organization, policy and training; monitoring of the working environment; personnel monitoring; protection of the public; radiological incidents; and non-radiological health and safety. (author)
The impact of a peer-led participatory health and safety training program for Latino day laborers in construction.

Science.gov (United States)

Williams, Quintin; Ochsner, Michele; Marshall, Elizabeth; Kimmel, Louis; Martino, Carmen

2010-06-01

Immigrant Latino day laborers working in residential construction are at particularly high risk of fatal and non-fatal traumatic injury and benefit from targeted training. To understand the impact of a participatory, peer-facilitated health and safety awareness training customized to the needs of Latino day laborers. Baseline surveys exploring exposures, PPE use, attitudes, work practices and work-related injuries were collected from more than 300 New Jersey Latino day laborers in construction prior to their participation in a one day (minimum of six hour) Spanish language health and safety training class. The classes, led by trained worker trainers, engaged participants in a series of tasks requiring teamwork and active problem solving focused on applying safe practices to situations they encounter at their worksites. Follow-up surveys were difficult to obtain among mobile day laborers, and were collected from 70 men (22% response rate) 2-6 months following training. Chi-square analysis was used to compare pre- and post-intervention PPE use, self protective actions, and self-reported injury rates. Focus groups and in-depth interviews addressing similar issues provided a context for discussing the survey findings. At baseline, the majority of day laborers who participated in this study reported great concern about the hazards of their work and were receptive to learning about health and safety despite limited influence over employers. Changes from baseline to follow-up revealed statistically significant differences in the use of certain types of PPE (hard hats, work boots with steel toes, safety harnesses, and visible safety vests), and in the frequency of self-protective work practices (e.g., trying to find out more about job hazards on your own). There was also a suggestive decrease in self-reported injuries (receiving an injury at work serious enough that you had to stop working for the rest of the day) post-training based on small numbers. Sixty-six percent of
Investigating the potential benefits of on-site food safety training for Folklorama, a temporary food service event.

Science.gov (United States)

Mancini, Roberto; Murray, Leigh; Chapman, Benjamin J; Powell, Douglas A

2012-10-01

Folklorama in Winnipeg, Manitoba, Canada, is a 14-day temporary food service event that explores the many different cultural realms of food, food preparation, and entertainment. In 2010, the Russian pavilion at Folklorama was implicated in a foodborne outbreak of Escherichia coli O157 that caused 37 illnesses and 18 hospitalizations. The ethnic nature and diversity of foods prepared within each pavilion presents a unique problem for food inspectors, as each culture prepares food in their own very unique way. The Manitoba Department of Health and Folklorama Board of Directors realized a need to implement a food safety information delivery program that would be more effective than a 2-h food safety course delivered via PowerPoint slides. The food operators and event coordinators of five randomly chosen pavilions selling potentially hazardous food were trained on-site, in their work environment, focusing on critical control points specific to their menu. A control group (five pavilions) did not receive on-site food safety training and were assessed concurrently. Public health inspections for all 10 pavilions were performed by Certified Public Health Inspectors employed with Manitoba Health. Critical infractions were assessed by means of standardized food protection inspection reports. The results suggest no statistically significant difference in food inspection scores between the trained and control groups. However, it was found that inspection report results increased for both the control and trained groups from the first inspection to the second, implying that public health inspections are necessary in correcting unsafe food safety practices. The results further show that in this case, the 2-h food safety course delivered via slides was sufficient to pass public health inspections. Further evaluations of alternative food safety training approaches are warranted.
Modern design and safety analysis of the University of Florida Training Reactor

International Nuclear Information System (INIS)

Jordan, K.A.; Springfels, D.; Schubring, D.

2015-01-01

Highlights: • A new safety analysis of the University of Florida Training Reactor is presented. • This analysis uses modern codes and replaces the NRC approved analysis from 1982. • Reduction in engineering margin confirms that the UFTR is a negligible risk reactor. • Safety systems are not required to ensure that safety limits are not breached. • Negligible risk reactors are ideal for testing digital I&C equipment. - Abstract: A comprehensive series of neutronics and thermal hydraulics analyses were conducted to demonstrate the University of Florida Training Reactor (UFTR), an ARGONAUT type research reactor, as a negligible risk reactor that does not require safety-related systems or components to prevent breach of a safety limit. These analyses show that there is no credible UFTR accident that would result in major fuel damage or risk to public health and safety. The analysis was based on two limiting scenarios, whose extremity bound all other accidents of consequence: (1) the large step insertion of positive reactivity and (2) the release of fission products due to mechanical damage to a spent fuel plate. The maximum step insertion of positive reactivity was modeled using PARET/ANL software and shows a maximum peak fuel temperature of 283.2 °C, which is significantly below the failure limit of 530 °C. The exposure to the staff and general public was calculated for the worst-case fission product release scenario using the ORIGEN-S and COMPLY codes and was shown to be 6.5% of the annual limit. Impacts on reactor operations and an Instrumentation & Control System (I&C) upgrade are discussed
Modern design and safety analysis of the University of Florida Training Reactor

Energy Technology Data Exchange (ETDEWEB)

Jordan, K.A., E-mail: kjordan@ufl.edu [University of Florida, 106 UFTR Bldg., PO Box 116400, Gainesville, FL 32611-6400 (United States); Springfels, D., E-mail: dspringfels@ufl.edu [University of Florida, 106 UFTR Bldg., PO Box 116400, Gainesville, FL 32611-6400 (United States); Schubring, D., E-mail: dlschubring@ufl.edu [University of Florida, 202 Nuclear Science Building, PO Box 118300, Gainesville, FL 32611-8300 (United States)

2015-05-15

Highlights: • A new safety analysis of the University of Florida Training Reactor is presented. • This analysis uses modern codes and replaces the NRC approved analysis from 1982. • Reduction in engineering margin confirms that the UFTR is a negligible risk reactor. • Safety systems are not required to ensure that safety limits are not breached. • Negligible risk reactors are ideal for testing digital I&C equipment. - Abstract: A comprehensive series of neutronics and thermal hydraulics analyses were conducted to demonstrate the University of Florida Training Reactor (UFTR), an ARGONAUT type research reactor, as a negligible risk reactor that does not require safety-related systems or components to prevent breach of a safety limit. These analyses show that there is no credible UFTR accident that would result in major fuel damage or risk to public health and safety. The analysis was based on two limiting scenarios, whose extremity bound all other accidents of consequence: (1) the large step insertion of positive reactivity and (2) the release of fission products due to mechanical damage to a spent fuel plate. The maximum step insertion of positive reactivity was modeled using PARET/ANL software and shows a maximum peak fuel temperature of 283.2 °C, which is significantly below the failure limit of 530 °C. The exposure to the staff and general public was calculated for the worst-case fission product release scenario using the ORIGEN-S and COMPLY codes and was shown to be 6.5% of the annual limit. Impacts on reactor operations and an Instrumentation & Control System (I&C) upgrade are discussed.
20 CFR 641.670 - May an eligible individual be enrolled simultaneously in section 502(e) private sector training...

Science.gov (United States)

2010-04-01

... simultaneously in section 502(e) private sector training activities operated by one grantee and a community... EMPLOYMENT PROGRAM Private Sector Training Projects Under Section 502(e) of the OAA § 641.670 May an eligible individual be enrolled simultaneously in section 502(e) private sector training activities operated by one...

OPERATIONAL DISTRIBUTION OF THE TRAIN TRAFFIC VOLUME ON THE SECTIONS OF RAILWAY OPERATING DOMAIN

Directory of Open Access Journals (Sweden)

G. Ya. Моzolevich

2013-10-01

Full Text Available Purpose. The task of the operational distribution of train traffic volume on the sections of operating domain is the optimization one. It is solved in the operational conditions by the dispatch station. The article sets the problem of formalizing and finding the new ways to solve this urgent problem. Methodology. A new approach to solving the problem of operational distribution of train traffic volume on the sections of the rail network with a choice of routes for all train traffics was proposed. Findings. A study of possible routes for the train traffic handle on the operating domain used for mass freight transportations between Krivyi Rih and Donbas was carried out. The use of the proposed method allowed us to obtain a rational distribution of trains on the rail network sections. Originality. The method of train traffic volume distribution in the network under operational conditions was improved. The method, as opposed to the current one allows one to select the route of separate units handle (according to the criteria of the weighted average cost for 1 ton of cargo. Practical value. The use of the proposed technology of the operational distribution of train traffic volume will increase the efficiency of the railways in general and ensure the competitiveness of rail transportations. The methodology implementation involves the use of railway dispatch station for the automated workplaces with appropriate informational support.
Safety Training: places available in November - December 2013

CERN Multimedia

Isabelle CUSATO, HSE Unit

2013-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue (see here). November - December 2013 (alphabetical order) Conduite de chariots élévateurs (Driving of forklifts) 04-NOV-13 to 05-NOV-13, 8.30 – 17.30, in French with handouts in English Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (Driving of cherry-pickers) 09-DEC-13 to 10-DEC-13, 8.30 – 17.30, in French with handouts in English Habilitation électrique personnel électricien basse tension (Electrical habilitation for electricians in low voltage) 30-OCT-13 to 01-NOV-13, 9.00 – 17.30, in English 04-NOV-13 to 06-NOV-13, 9.00 – 17.30, in English Habilitation électrique personnel électricien basse et haute tensions (Electrical habilitation for electricians in low and high voltage) 16-DEC-13 to 19-DEC-13, 9.00 &...
Safety Training: places available in November - December 2013

CERN Multimedia

Isabelle CUSATO, HSE Unit

2013-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue (see here). November - December 2013 (alphabetical order) Conduite de chariots élévateurs (Driving of forklifts) 04-NOV-13 to 05-NOV-13, 8.30 – 17.30, in French with handouts in English Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (Driving of cherry-pickers) 09-DEC-13 to 10-DEC-13, 8.30 – 17.30, in French with handouts in English Habilitation électrique personnel électricien basse tension (Electrical habilitation for electricians in low voltage) 30-OCT-13 to 01-NOV-13, 9.00 – 17.30, in English 04-NOV-13 to 06-NOV-13, 9.00 – 17.30, in English Habilitation électrique personnel électricien basse et haute tensions (Electrical habilitation for electricians in low and high voltage) 16-DEC-13 to 19-DEC-13, 9.00 &am...
How to bring issues of health and safety closer to young workers during their work training

Directory of Open Access Journals (Sweden)

Helena Mesarič

2016-06-01

Full Text Available The data collected by the European Community indicates that the young, economically active population, aged from 18 to 24 years, is more likely to suffer from occupational injuries and occupational diseases in comparison with the rest of the working population, due to the lack of experience and knowledge about health and safety in the workplace, and insufficient training for safe and healthy work practices. Employers must establish an adequate system to ensure workplace health and safety, with an emphasis on providing safety training for pupils and students undergoing apprenticeship and the newly-employed young people. The Ministry of Labour, Family, Social Affairs and Equal Opportunities runs a series of projects aiming to promote health and safety culture among young people in Slovenia. The goal of the national programme for introducing occupational health and safety into the education process is offering a variety of tools and devices for educators and teachers, which can be employed to introduce the issues of occupational health and safety to young people in an exciting and engaging manner.
Safety Training: Ergonomics - Applying ergonomic principles in the workplace

CERN Multimedia

Isabelle Cusato

2010-01-01

We propose a half day awareness session on the hazards posed by a poor posture while working on a screen (back pain, eyestrain, sore wrists…) and best practices to address them. The next sessions will be held on 18 November 2010 (morning session in French and afternoon session in English). The registration via the Safety Training catalogue is mandatory. Places will be allocated in order of receipt. For any further information, please contact Isabelle Cusato, 73811.
Training and qualification program for nuclear criticality safety technical staff

International Nuclear Information System (INIS)

Taylor, R.G.; Worley, C.A.

1996-01-01

A training and qualification program for nuclear criticality safety technical staff personnel has been developed and implemented. The program is compliant with requirements and provides evidence that a systematic approach has been taken to indoctrinate new technical staff. Development involved task analysis to determine activities where training was necessary and the standard which must be attained to qualify. Structured mentoring is used where experienced personnel interact with candidates using checksheets to guide candidates through various steps and to provide evidence that steps have been accomplished. Credit can be taken for the previous experience of personnel by means of evaluation boards which can credit or modify checksheet steps. Considering just the wealth of business practice and site specific information a new person at a facility needs to assimilate, the program has been effective in indoctrinating new technical staff personnel and integrating them into a productive role. The program includes continuing training
New safety training for access to the PS complex areas

CERN Multimedia

2012-01-01

Since 10/08/2012, a new course dedicated to the specific radiological risks in the accelerators of the PS complex has been available on SIR (https://sir.cern.ch/). This course complements the general classroom-based Radiation Safety training. Successful completion of the course will be obligatory and verified by the access system as from 01/11/2012 for access to the following accelerator areas: LINAC2, BOOSTER, PS and TT2. Information and reminder e-mails will be sent to all persons currently authorized to access the accelerators of the PS complex. For questions please contact the HSE unit and in particular, the Radiation Protection Group (+41227672504 or safety-rp-ps-complex@cern.ch).
METHODOLOGY OF DETERMINATION OF ADMISSIBLE SPEEDS OF TRAIN MOVEMENT ON DIFFICULT SECTIONS OF RAILROAD PLAN

Directory of Open Access Journals (Sweden)

M. B. Kurhan

2014-03-01

Full Text Available Purpose. Determination of improvement ways of admissible speeds of train movement on the difficult sections of а railroad plan. Methodology. Mathematical modeling of the train traffic is used to achieve the purpose of research. The average weighted speed and elevation of outer rail is predicted on this basis. Findings. The case analysis of the speeds determination in curved sections of track was carried out. The above mentioned track sections adversely affect the ride comfort and the intensity of the way disorder, as well as the reasons that contribute to the speed limits traffic on the railways of Ukraine. The technique of performing the calculations for determining the permissible train speeds was developed and tested on real curves of railways, were the accelerated movement of trains was introduced. Proposals on automate calculations in distances and services by way of determining the permissible speeds in curves were developed. Originality. Methodology of determining the permissible motion speeds and elevation of outer rails on the difficult sections of the railway plan was developed. This approach allows you to get a rational decisions on reorganization of plan based on local conditions. Practical value. The developed technique of definition of admissible speeds of motion in curves was implemented as a program DopShvid. The program was tested on real railway sections, where the accelerated train motion was introduced.
Effects of Different Types of Cognitive Training on Cognitive Function, Brain Structure, and Driving Safety in Senior Daily Drivers: A Pilot Study.

Science.gov (United States)

Nozawa, Takayuki; Taki, Yasuyuki; Kanno, Akitake; Akimoto, Yoritaka; Ihara, Mizuki; Yokoyama, Ryoichi; Kotozaki, Yuka; Nouchi, Rui; Sekiguchi, Atsushi; Takeuchi, Hikaru; Miyauchi, Carlos Makoto; Ogawa, Takeshi; Goto, Takakuni; Sunda, Takashi; Shimizu, Toshiyuki; Tozuka, Eiji; Hirose, Satoru; Nanbu, Tatsuyoshi; Kawashima, Ryuta

2015-01-01

Increasing proportion of the elderly in the driving population raises the importance of assuring their safety. We explored the effects of three different types of cognitive training on the cognitive function, brain structure, and driving safety of the elderly. Thirty-seven healthy elderly daily drivers were randomly assigned to one of three training groups: Group V trained in a vehicle with a newly developed onboard cognitive training program, Group P trained with a similar program but on a personal computer, and Group C trained to solve a crossword puzzle. Before and after the 8-week training period, they underwent neuropsychological tests, structural brain magnetic resonance imaging, and driving safety tests. For cognitive function, only Group V showed significant improvements in processing speed and working memory. For driving safety, Group V showed significant improvements both in the driving aptitude test and in the on-road evaluations. Group P showed no significant improvements in either test, and Group C showed significant improvements in the driving aptitude but not in the on-road evaluations. The results support the effectiveness of the onboard training program in enhancing the elderly's abilities to drive safely and the potential advantages of a multimodal training approach.
International Atomic Energy Agency Activities on Education and Training in Radiation, Transport and Waste Safety: Strategic Approach for a Sustainable System

International Nuclear Information System (INIS)

Marbit, K.; Sadagopan, G.

2005-01-01

The statutory safety functions of the international Atomic Energy Agency (IAEA) include the establishment of and provision for the application of safety standards for protection of health, life and property against ionizing radiation. The safety standards are based on the presumption that a national infrastructure is in place enabling the government to discharge its responsibilities for protection and safety. Education and training is an essential element of the infrastructure. The IAEA education and training activities follows the the resolutions of its general conferences and reflects the latest IAEA standards and guidance. several general conference resolutions have emphasized the importance of education and training (e.g. GC (XXXV)/RES/552 in 1991,GC (XXXVI)/ RES/584 in 1992, GC (43)/RES/13 in 1999 and more recently GC (44)/RES/13 in 2000). In response to GC (44) /RES/13, the IAEA prepared a strategic approach to education and training in radiation and waste safety (strategy on education and training) aiming at establishing, by 2010 sustainable education and training programmes in member states. This strategy was endorsed by the general conference resolution GC(45)/RES/10C that, inter alia, urged the secretariat to implement the strategy on education and training, and to continue to strengthen, subject to available resources, its current effort in this area, and in particular to assist Member States national, regional and collaborating centres in conducting such education and training activities in the relevant official languages of the IAEA. The General Conference resolutions GC(46)RES/9C in 2002 and GC(47)RES/7 in 2003 urged the Agency to continue its efforts to implement the Strategy. The purpose of this paper is to present the newly established Strategic Approach to Education and Training in Radiation, Transport and Waste Safety and its implementation
International Atomic Energy Agency Activities on Education and Training in Radiation Transport and Waste Safety: Strategic Approach for a Sustainable System

International Nuclear Information System (INIS)

Mrabit, K.; Sadagopan, G.

2004-01-01

The statutory safety functions of the International Atomic Energy Agency (IAEA) include the establishment of and provision for the application of safety standards for protection of health, life and property against ionizing radiation. The safety standards are based on the presumption that a national infrastructure is in place enabling the Government to discharge its responsibilities for protection and safety. Education and training is an essential element of the infrastructure. The IAEA education and training activities follows the resolutions of its General Conferences and reflects the latest IAEA standards and guidance. Several General Conference resolutions have emphasized the importance of education and training [e.g. GC(XXXV)/RES/552 in 1991; GC(XXXVI)/RES/584 in 1992; GC(43)/RES/13 in 1999 and more recently GC(44)/RES/13 in 2000]. In response to GC(44)/RES/13, the IAEA prepared a S trategic Approach to Education and Training in Radiation and Waste Safety ( Strategy on Education and Training) aiming at establishing, by 2010, sustainable education and training programmes in Member States. This Strategy was endorsed by the General Conference resolution GC(45)/RES/10C that, inter alia, urged the Secretariat to implement the Strategy on Education and Training, and to continue to strengthen, subject to available resources, its current effort in this area, and in particular to assist Member State' national, regional and collaborating centres in conducting such education and training activities in the relevant official languages of the IAEA. The General Conference resolutions GC(46)RES/9C in 2002 and GC(47)RES/7 in 2003 urged the Agency to continue its efforts to implement the Strategy. The purpose of this paper is to present the newly established Strategic Approach to Education and Training in Radiation, Transport and Waste Safety and its implementation. (Author)
The Strategy to Align Road Safety Education to the Further Education and Training Band Curriculum

Science.gov (United States)

Malan, Lianne; van Dijk, Gerda; Fourie, David

2016-01-01

Road safety education is a complex phenomenon which should be viewed holistically if taken into account the interconnectedness of education, infrastructure and enforcement. Effective road safety education is specifically important for learners in the Further Education and Training (FET) band, as they are active contributors to a community. The…
Adult Learning in Health and Safety: Some Issues and Approaches.

Science.gov (United States)

O Fathaigh, Mairtin

This document, which was developed for presentation at a seminar on adult learning and safety, examines approaches to occupational safety and health (OSH) learning/training in the workplace. Section 1 examines selected factors affecting adults' learning in workplace OSH programs. The principal dimensions along which individual adult learners will…
Tool for assistance in testing the safety logic section of nuclear plants

International Nuclear Information System (INIS)

Boulc'h, J.; Meur, M. le; Collart, J.M.; Segalard, J.; Uberschlag, J.

1986-01-01

The analysis of the protection system logic section (SPIN) of the PALUEL plant performed manually have led to the study of a logical tool for testing the safety logic section having or having not failures. It is a dynamic analyser which from a terminal in a sharing time system will be able to generate testing sequences, to simulate a processor and its environment and to analyse the logic sections with their workable code
Training and qualification program for nuclear criticality safety technical staff. Revision 1

International Nuclear Information System (INIS)

Taylor, R.G.; Worley, C.A.

1997-01-01

A training and qualification program for nuclear criticality safety technical staff personnel has been developed and implemented. All personnel who are to perform nuclear criticality safety technical work are required to participate in the program. The program includes both general nuclear criticality safety and plant specific knowledge components. Advantage can be taken of previous experience for that knowledge which is portable such as performance of computer calculations. Candidates step through a structured process which exposes them to basic background information, general plant information, and plant specific information which they need to safely and competently perform their jobs. Extensive documentation is generated to demonstrate that candidates have met the standards established for qualification
30 CFR 75.161 - Plans for training programs.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Plans for training programs. 75.161 Section 75... Provision] § 75.161 Plans for training programs. Each operator must submit to the district manager, of the Coal Mine Safety and Health District in which the mine is located, a program or plan setting forth what...
Safety of patient meals in 2 hospitals in Alexandria, Egypt before and after training of food handlers.

Science.gov (United States)

El Derea, H; Salem, E; Fawzi, M; Abdel Azeem, M

2008-01-01

We assessed the food safety knowledge and food handling practices of 23 food handlers in 2 hospitals in Alexandria, Egypt [Gamal Abdel Nasser (GAN) and Medical Research Institute (MRI)] before and after a food safety training programme, and also the bacteriological quality of patient meals and kitchen equipment. There was a significant improvement in all knowledge-associated parameters except for personal hygiene in GAN. There was an improvement in the food safety practices in both hospitals. The bacteriological quality of most patient meals and food preparation surfaces and utensils improved after training. The bacteriological quality of patients' meals served in GAN was generally better than that in MRI.
Crew resource management training adapted to nuclear power plant operators for enhancing safety attitude

International Nuclear Information System (INIS)

Ishibashi, Akira; Kitamura, Masaharu; Takahashi, Makoto

2015-01-01

A conventional training program for nuclear power plant operators mainly focuses on the improvement of knowledge and skills of individual operators. Although it has certainly contributed to safety operation of nuclear power plants, some recent incidents have indicated the necessity of an additional training program aiming at the improvement of team performance. In the aviation domain, crew resource management (CRM) training has demonstrated the effectiveness in resolving team management issues of flight crews, aircraft maintenance crews, and so on. In the present research, we attempt to introduce the CRM concept into operator training in nuclear power plant for the training of conceptual skill (that is, non-technical skill). In this paper an adapted CRM training for nuclear power plant operators is proposed. The proposed training method has been practically utilized in the training course of the managers of nuclear power plants. (author)
A collaborative effort of medical and educational facilities for radiation safety training of nurses

International Nuclear Information System (INIS)

Matsuda, Naoki; Yoshida, Masahiro; Takao, Hideaki

2004-01-01

The radiation safety training course has been conducted for nurses of the university hospital by the collaboration of medical and educational staffs in Nagasaki University. This course was given for 6 hours covering basics of radiation, effects on human body, tips for radiation protection in clinical settings, and practical training, to more than 350 nurses overall. The pre-instruction survey by questionnaire revealed that 60% of nurses felt fears about radiation when they care for patients, which reduced to less than 15% in the post-instruction survey. The course also motivated nurses to give an answer patients' questions about radiation safety. In contrast, more than 30% of nurses were aware of neither their glass badge readings nor the maximum dose limit of radiation exposure even after the course. These results suggested that medical-educational collaborative training for nurses were effective on reducing nurses' fears about radiation and that repeated and continuous education would be necessary to establish their practice for radiation protection. (author)
What stage are low-income and middle-income countries (LMICs) at with patient safety curriculum implementation and what are the barriers to implementation? A two-stage cross-sectional study

Science.gov (United States)

Ginsburg, Liane R; Dhingra-Kumar, Neelam; Donaldson, Liam J

2017-01-01

Objectives The improvement of safety in healthcare worldwide depends in part on the knowledge, skills and attitudes of staff providing care. Greater patient safety content in health professional education and training programmes has been advocated internationally. While WHO Patient Safety Curriculum Guides (for Medical Schools and Multi-Professional Curricula) have been widely disseminated in low-income and middle-income countries (LMICs) over the last several years, little is known about patient safety curriculum implementation beyond high-income countries. The present study examines patient safety curriculum implementation in LMICs. Methods Two cross-sectional surveys were carried out. First, 88 technical officers in Ministries of Health and WHO country offices were surveyed to identify the pattern of patient safety curricula at country level. A second survey followed that gathered information from 71 people in a position to provide institution-level perspectives on patient safety curriculum implementation. Results The majority, 69% (30/44), of the countries were either considering whether to implement a patient safety curriculum or actively planning, rather than actually implementing, or embedding one. Most organisations recognised the need for patient safety education and training and felt a safety curriculum was compatible with the values of their organisation; however, important faculty-level barriers to patient safety curriculum implementation were identified. Key structural markers, such as dedicated financial resources and relevant assessment tools to evaluate trainees’ patient safety knowledge and skills, were in place in fewer than half of organisations studied. Conclusions Greater attention to patient safety curriculum implementation is needed. The barriers to patient safety curriculum implementation we identified in LMICs are not unique to these regions. We propose a framework to act as a global standard for patient safety curriculum implementation

SmartRoads: training Indonesian workers to become road safety ambassadors in industrial and community settings.

Science.gov (United States)

Montero, Kerry; Spencer, Graham; Ariens, Bernadette

2012-06-01

This paper reports on a programme to improve road safety awareness in an industrial community in the vicinity of Jakarta, in Indonesia. Adapting the model of a successful community and school-based programme in Victoria, in Australia, and using a peer education approach, 16 employees of a major manufacturing company were trained to implement road safety education programmes amongst their peers. Specific target groups for the educators were colleagues, schools and the local community. Over 2 days the employees, from areas as diverse as production, public relations, personnel services, administration and management, learned about road safety facts, causes of traffic casualties, prevention approaches and peer education strategies. They explored and developed strategies to use with their respective target groups and practised health education skills. The newly trained workers received certificates to acknowledge them as 'SmartRoads Ambassadors' and, with follow-up support and development, became road safety educators with a commitment and responsibility to deliver education to their respective work and local communities. This paper argues that the model has potential to provide an effective and locally relevant response to road safety issues in similar communities.
A comparative study of vocational education and occupational safety and health training in China and the UK.

Science.gov (United States)

Nie, Baisheng; Huang, Xin; Xue, Fei; Chen, Jiang; Liu, Xiaobing; Meng, Yangyang; Huang, Jinxin

2018-06-01

In order to enhance Chinese workers' occupational safety awareness, it is essential to learn from developed countries' experiences. This article investigates thoroughly occupational safety and health (OSH) in China and the UK; moreover, the article performs a comparison of Chinese and British OSH training-related laws, regulations and education system. The following conclusions are drawn: China's work safety continues to improve, but there is still a large gap compared with the UK. In China a relatively complete vocational education and training (VET) system has been established. However, there exist some defects in OSH. In the UK, the employer will not only pay attention to employees' physiological health, but also to their mental health. The UK's VET is characterized by classification and grading management, which helps integrate OSH into the whole education system. China can learn from the UK in the development of policies, VET and OSH training.
9 CFR 417.7 - Training.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Training. 417.7 Section 417.7 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE REGULATORY REQUIREMENTS UNDER THE FEDERAL MEAT INSPECTION ACT AND THE POULTRY PRODUCTS INSPECTION ACT HAZARD ANALYSIS AND...
Effects of Different Types of Cognitive Training on Cognitive Function, Brain Structure, and Driving Safety in Senior Daily Drivers: A Pilot Study

Science.gov (United States)

Taki, Yasuyuki; Kanno, Akitake; Akimoto, Yoritaka; Ihara, Mizuki; Yokoyama, Ryoichi; Kotozaki, Yuka; Sekiguchi, Atsushi; Takeuchi, Hikaru; Miyauchi, Carlos Makoto; Ogawa, Takeshi; Goto, Takakuni; Sunda, Takashi; Shimizu, Toshiyuki; Tozuka, Eiji; Hirose, Satoru; Nanbu, Tatsuyoshi; Kawashima, Ryuta

2015-01-01

Background. Increasing proportion of the elderly in the driving population raises the importance of assuring their safety. We explored the effects of three different types of cognitive training on the cognitive function, brain structure, and driving safety of the elderly. Methods. Thirty-seven healthy elderly daily drivers were randomly assigned to one of three training groups: Group V trained in a vehicle with a newly developed onboard cognitive training program, Group P trained with a similar program but on a personal computer, and Group C trained to solve a crossword puzzle. Before and after the 8-week training period, they underwent neuropsychological tests, structural brain magnetic resonance imaging, and driving safety tests. Results. For cognitive function, only Group V showed significant improvements in processing speed and working memory. For driving safety, Group V showed significant improvements both in the driving aptitude test and in the on-road evaluations. Group P showed no significant improvements in either test, and Group C showed significant improvements in the driving aptitude but not in the on-road evaluations. Conclusion. The results support the effectiveness of the onboard training program in enhancing the elderly's abilities to drive safely and the potential advantages of a multimodal training approach. PMID:26161000
Effects of Different Types of Cognitive Training on Cognitive Function, Brain Structure, and Driving Safety in Senior Daily Drivers: A Pilot Study

Directory of Open Access Journals (Sweden)

Takayuki Nozawa

2015-01-01

Full Text Available Background. Increasing proportion of the elderly in the driving population raises the importance of assuring their safety. We explored the effects of three different types of cognitive training on the cognitive function, brain structure, and driving safety of the elderly. Methods. Thirty-seven healthy elderly daily drivers were randomly assigned to one of three training groups: Group V trained in a vehicle with a newly developed onboard cognitive training program, Group P trained with a similar program but on a personal computer, and Group C trained to solve a crossword puzzle. Before and after the 8-week training period, they underwent neuropsychological tests, structural brain magnetic resonance imaging, and driving safety tests. Results. For cognitive function, only Group V showed significant improvements in processing speed and working memory. For driving safety, Group V showed significant improvements both in the driving aptitude test and in the on-road evaluations. Group P showed no significant improvements in either test, and Group C showed significant improvements in the driving aptitude but not in the on-road evaluations. Conclusion. The results support the effectiveness of the onboard training program in enhancing the elderly’s abilities to drive safely and the potential advantages of a multimodal training approach.
Effects of Different Types of Cognitive Training on Cognitive Function, Brain Structure, and Driving Safety in Senior Daily Drivers: A Pilot Study

OpenAIRE

Nozawa, Takayuki; Taki, Yasuyuki; Kanno, Akitake; Akimoto, Yoritaka; Ihara, Mizuki; Yokoyama, Ryoichi; Kotozaki, Yuka; Nouchi, Rui; Sekiguchi, Atsushi; Takeuchi, Hikaru; Miyauchi, Carlos Makoto; Ogawa, Takeshi; Goto, Takakuni; Sunda, Takashi; Shimizu, Toshiyuki

2015-01-01

Background. Increasing proportion of the elderly in the driving population raises the importance of assuring their safety. We explored the effects of three different types of cognitive training on the cognitive function, brain structure, and driving safety of the elderly. Methods. Thirty-seven healthy elderly daily drivers were randomly assigned to one of three training groups: Group V trained in a vehicle with a newly developed onboard cognitive training program, Group P trained with a simil...
Building competence in radiation and nuclear safety through education and training - the approach of a national regulatory authority

International Nuclear Information System (INIS)

Karfopoulos, K.L.; Carinou, E.; Kamenopoulou, V.; Dimitriou, P.; Housiadas, Ch.

2015-01-01

The Greek Atomic Energy Commission (EEAE) is the national competent authority for radiation and nuclear safety and security as well as for the radiation protection of ionizing and artificially produced non-ionizing radiation. The legal framework determines, inter alia, the responsibilities in education and training issues. The EEAE has a range of activities, in providing postgraduate and continuous education and training on radiation protection, and nuclear safety and security, at the national and international levels. At the national level, and particularly in the medical field, the EEAE is a participant in and a major contributor to the Inter-University Postgraduate Program on Medical Radiation Physics. Since 2003, the EEAE has been the Regional Training Center (RTC) for radiation, transport and waste safety of the International Atomic Energy Agency (IAEA) for the European Region in the English language. Moreover, the EEAE has also been recognized as the IAEA's Regional Training Center (RTC) in nuclear security in the English language since 2013. The EEAE recently proceeded to two significant initiatives: the design of a national program for education and training, and the certification of the Department of Education according to ISO 29990:2010. In this paper, the initiatives taken to enhance the radiation protection system in the country through education and training are presented. (authors)
Relational safety and liberating training spaces: an application with a focus on sexual orientation issues.

Science.gov (United States)

Hernández, Pilar; Rankin, Pressley

2008-04-01

This article describes and discusses a teaching case of a clinical training situation involving a gay marriage and family therapy student working with a same-sex affectional couple. The conceptual pillars of this teaching case, relational safety and liberating spaces, are advanced as illustrations of how the student developed his voice in the training process. Pivotal moments in this process are discussed, as are implications for training and personal and professional growth.
The TRAIN-project: railway safety and the train driver information environment and work situation. A summary of the main results

Energy Technology Data Exchange (ETDEWEB)

Kecklund, L. [MTO Psychology and Swedish National Rail Administration (Sweden); Ingre, M.; Kecklund, G.; Soederstroem, M.; Aakerstedt, T. [National Inst. for Psychosocial Factors and Health (Sweden); Lindberg, E. [Swedish National Rail Administration (Sweden); Jansson, A.; Olsson, E.; Sandblad, B. [Uppsala Univ. (Sweden). Dept. of Human-Computer Interaction; Almqvist, P. [Swedish State Railways (Sweden)

2001-07-01

The TRAIN project investigates traffic safety related risks, focusing in particular on the train driver work situation, use of information but also on the supporting safety organisation. It is an on-going project funded and managed by Swedish National Rail Administration and carried out by independent researchers. The project provides a multi-disciplinary investigation by use of a man-technology-organisation (MTO) perspective. Activities performed are task analysis, evaluation of the drivers use of information and interaction with the ATP system as well as analyses of stress, mental workload and work hours. Several methods are being used such as interviews, questionnaires, diaries, activity monitoring and videotapes. This paper gives an overview of the project as well as a short summary of the main results. Detailed results are presented in separate reports as started in the reference list. Some of the main results are that the drivers report severe problems concerning sleepiness on early morning shifts, problems with maintenance on vehicles, lack of information supporting the planning task as well as problems in understanding ATP functions. Two groups of drivers having a feed-back related as opposed to a feed-forward driving style could be identified. In conclusion there is a great need to perform more scientific studies of human factors and railway safety as well as to implement safety management programs including professional human factors competence in the railway industries. (orig.)
Using Simulations to Improve Electronic Health Record Use, Clinician Training and Patient Safety: Recommendations From A Consensus Conference.

Science.gov (United States)

Mohan, Vishnu; Woodcock, Deborah; McGrath, Karess; Scholl, Gretchen; Pranaat, Robert; Doberne, Julie W; Chase, Dian A; Gold, Jeffrey A; Ash, Joan S

2016-01-01

A group of informatics experts in simulation, biomedical informatics, patient safety, medical education, and human factors gathered at Corbett, Oregon on April 30 and May 1, 2015. Their objective: to create a consensus statement on best practices for the use of electronic health record (EHR) simulations in education and training, to improve patient safety, and to outline a strategy for future EHR simulation work. A qualitative approach was utilized to analyze data from the conference and generate recommendations in five major categories: (1) Safety, (2) Education and Training, (3) People and Organizations, (4) Usability and Design, and (5) Sociotechnical Aspects.
16 CFR 1500.88 - Exemptions from lead limits under section 101 of the Consumer Product Safety Improvement Act for...

Science.gov (United States)

2010-01-01

... 101 of the Consumer Product Safety Improvement Act for certain electronic devices. 1500.88 Section... from lead limits under section 101 of the Consumer Product Safety Improvement Act for certain electronic devices. (a) The Consumer Product Safety Improvement Act (CPSIA) provides for specific lead limits...
Comparison on the working mode and training mode of nuclear safety inspectors between China and France

International Nuclear Information System (INIS)

Mao Haiyun

2013-01-01

Because of the rapid development of nuclear industry, the nuclear safety regulation work becomes heavier than before. Young inspectors are needed for the regulatory body. It is our important subject to help enhance the inspection ability of inspectors through on-the-job training. This article presents the different approaches on work and training for French and Chinese inspectors, and gives some suggestions for inspector training. (author)
Safety Training - places available in November - December 2012

CERN Multimedia

Isabelle CUSATO, HSE Unit

2012-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. November - December 2012 (alphabetical order) Conduite de chariots élévateurs (Driving of Forklifts) 08-NOV-12 to 09-NOV-12, 8.30 – 17.30, in French 22-NOV-12 to 23-NOV-12, 8.30 – 17.30, in French 10-DEC-12 to 11-DEC-12, 8.30 – 17.30, in French With the possibility to have the handouts in English Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (Driving of Cherry-pickers) 05-NOV-12 to 06-NOV-12, 8.30 – 17.30, in French 19-NOV-12 to 20-NOV-12, 8.30 – 17.30, in French With the possibility to have the handouts in English Echafaudages - Réception, conformité (Scaffolding – Reception and conformity) 20-NOV-12 to 21-NOV-12, 9.00 – 17.30, in French (outside CERN, Bourg-en-Bresse) First-Aiders – bas...
Near-peers improve patient safety training in the preclinical curriculum.

Science.gov (United States)

Raty, Sally R; Teal, Cayla R; Nelson, Elizabeth A; Gill, Anne C

2017-01-01

Accrediting bodies require medical schools to teach patient safety and residents to develop teaching skills in patient safety. We created a patient safety course in the preclinical curriculum and used continuous quality improvement to make changes over time. To assess the impact of resident teaching on student perceptions of a Patient Safety course. Using the Institute for Healthcare Improvement patient safety curriculum as a frame, the course included the seven IHI modules, large group lectures and small group facilitated discussions. Applying a social action methodology, we evaluated the course for four years (Y1-Y4). In Y1, Y2, Y3 and Y4, we distributed a course evaluation to each student (n = 184, 189, 191, and 184, respectively) and the response rate was 96, 97, 95 and 100%, respectively. Overall course quality, clarity of course goals and value of small group discussions increased in Y2 after the introduction of residents as small group facilitators. The value of residents and the overall value of the course increased in Y3 after we provided residents with small group facilitation training. Preclinical students value the interaction with residents and may perceive the overall value of a course to be improved based on near-peer involvement. Residents gain valuable experience in small group facilitation and leadership.
Workplace training for senior trainees: a systematic review and narrative synthesis of current approaches to promote patient safety.

Science.gov (United States)

Walton, Merrilyn; Harrison, Reema; Burgess, Annette; Foster, Kirsty

2015-10-01

Preventable harm is one of the top six health problems in the developed world. Developing patient safety skills and knowledge among advanced trainee doctors is critical. Clinical supervision is the main form of training for advanced trainees. The use of supervision to develop patient safety competence has not been established. To establish the use of clinical supervision and other workplace training to develop non-technical patient safety competency in advanced trainee doctors. Keywords, synonyms and subject headings were used to search eight electronic databases in addition to hand-searching of relevant journals up to 1 March 2014. Titles and abstracts of retrieved publications were screened by two reviewers and checked by a third. Full-text articles were screened against the eligibility criteria. Data on design, methods and key findings were extracted. Clinical supervision documents were assessed against components common to established patient safety frameworks. Findings from the reviewed articles and document analysis were collated in a narrative synthesis. Clinical supervision is not identified as an avenue for embedding patient safety skills in the workplace and is consequently not evaluated as a method to teach trainees these skills. Workplace training in non-technical patient safety skills is limited, but one-off training courses are sometimes used. Clinical supervision is the primary avenue for learning in postgraduate medical education but the most overlooked in the context of patient safety learning. The widespread implementation of short courses is not matched by evidence of rigorous evaluation. Supporting supervisors to identify teaching moments during supervision and to give weight to non-technical skills and technical skills equally is critical. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.
Simulation-based training and assessment of non-technical skills in the Norwegian Helicopter Emergency Medical Services: a cross-sectional survey.

Science.gov (United States)

Abrahamsen, Håkon B; Sollid, Stephen J M; Öhlund, Lennart S; Røislien, Jo; Bondevik, Gunnar Tschudi

2015-08-01

Human error and deficient non-technical skills (NTSs) among providers of ALS in helicopter emergency medical services (HEMS) is a threat to patient and operational safety. Skills can be improved through simulation-based training and assessment. To document the current level of simulation-based training and assessment of seven generic NTSs in crew members in the Norwegian HEMS. A cross-sectional survey, either electronic or paper-based, of all 207 physicians, HEMS crew members (HCMs) and pilots working in the civilian Norwegian HEMS (11 bases), between 8 May and 25 July 2012. The response rate was 82% (n=193). A large proportion of each of the professional groups lacked simulation-based training and assessment of their NTSs. Compared with pilots and HCMs, physicians undergo statistically significantly less frequent simulation-based training and assessment of their NTSs. Fifty out of 82 (61%) physicians were on call for more than 72 consecutive hours on a regular basis. Of these, 79% did not have any training in coping with fatigue. In contrast, 72 out of 73 (99%) pilots and HCMs were on call for more than 3 days in a row. Of these, 54% did not have any training in coping with fatigue. Our study indicates a lack of simulation-based training and assessment. Pilots and HCMs train and are assessed more frequently than physicians. All professional groups are on call for extended hours, but receive limited training in how to cope with fatigue. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.
A systematic review of the effectiveness of occupational health and safety training.

Science.gov (United States)

Robson, Lynda S; Stephenson, Carol M; Schulte, Paul A; Amick, Benjamin C; Irvin, Emma L; Eggerth, Donald E; Chan, Stella; Bielecky, Amber R; Wang, Anna M; Heidotting, Terri L; Peters, Robert H; Clarke, Judith A; Cullen, Kimberley; Rotunda, Cathy J; Grubb, Paula L

2012-05-01

Training is regarded as an important component of occupational health and safety (OHS) programs. This paper primarily addresses whether OHS training has a beneficial effect on workers. The paper also examines whether higher engagement OHS training has a greater effect than lower engagement training. Ten bibliographic databases were searched for pre-post randomized trial studies published in journals between 1996 and November 2007. Training interventions were included if they were delivered to workers and were concerned with primary prevention of occupational illness or injury. The methodological quality of each relevant study was assessed and data was extracted. The impacts of OHS training in each study were summarized by calculating the standardized mean differences. The strength of the evidence on training's effectiveness was assessed for (i) knowledge, (ii) attitudes and beliefs, (iIi) behaviors, and (iv) health using the US Centers for Disease Control and Prevention's Guide to Community Preventive Services, a qualitative evidence synthesis method. Twenty-two studies met the relevance criteria of the review. They involved a variety of study populations, occupational hazards, and types of training. Strong evidence was found for the effectiveness of training on worker OHS behaviors, but insufficient evidence was found of its effectiveness on health (ie, symptoms, injuries, illnesses). The review team recommends that workplaces continue to deliver OHS training to employees because training positively affects worker practices. However, large impacts of training on health cannot be expected, based on research evidence.
Attitude of Nurses toward the Patient Safety Culture: A Cross-Sectional Study of the Hospitals in Tehran, Iran

Directory of Open Access Journals (Sweden)

Maryam Saberi

2017-07-01

Conclusion: According to the results, attitude of the nurses in the selected hospitals was poor toward the dimensions of the patient safety culture. Therefore, it is strongly recommended that specific training interventions be performed to enhance the work conditions and safety climate in these hospitals
20 CFR 641.630 - What private sector training activities are allowable under section 502(e)?

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false What private sector training activities are... Sector Training Projects Under Section 502(e) of the OAA § 641.630 What private sector training...: (a) Providing participants with services leading to transition to private sector employment...
Year-end technical stop: train to work safely

CERN Multimedia

Rosaria Marraffino

2016-01-01

As mentioned in the previous issue of the Bulletin (see here), the accelerators are currently undergoing maintenance as part of the year-end technical stop (YETS). Hundreds of people are working simultaneously on different machines, and many of them need to be trained in order to work safely underground. From a Safety Training point of view, this has resulted in a significant increase in training requests, most of them at the last minute, which are now being handled – but not without difficulties. In the LHC mock-up, a helium leak is simulated. In this stressful situation, the trainees learn how to put their mask on in less than 40 seconds. "The most requested course is the Self-Rescue Mask classroom training,” explains Christoph Balle, Safety Training Section Leader. “In this course, people are trained to face the oxygen deficiency hazards that may occur in CERN's underground areas, learning...

Impact of the draft DOE Training and Qualification Standard on an established training and qualification program

International Nuclear Information System (INIS)

Taylor, R.G.; Worley, C.A.

1999-01-01

One of the provisions of Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 97-2 was that the US Department of Energy (DOE) hor e llipsis Develop and institute ahor e llipsiscourse in criticality and criticality safety hor e llipsis to serve as the foundation for a program of formal qualification of criticality engineers. In response, a draft DOE standard establishing requirements for a formal qualification program for nuclear criticality safety (NCS) engineers has been prepared and is currently in review. The Oak Ridge Y-12 plant implemented a formal training and qualification program for NCS engineers in 1995. The program complies with existing DOE requirements. The program was developed using a performance-based systematic approach to training and is accomplished through structured mentoring where experienced personnel interact with candidates through various learning exercises. Self-study, exercises, and work under instruction are all utilized. The candidate's performance is evaluated by mentors and oral boards. Competency gained through experience at other sites can also be credited. Technical portions of the program are primarily contained in an initial Engineer-in-Training segment and in subsequent task-specific qualifications. The Engineer-in-Training segment exposes the candidate to fundamental NCS concepts through example problems; ensures the initial compliance training requirements are met; and includes readings from applicable procedures, technical documents, and standards. Upon completion of this initial training, candidates proceed to task qualifications. Tasks are defined NCS activities such as operational reviews, criticality safety evaluations, criticality safety computations, criticality accident alarm system (CAAS) evaluations, support for emergency management, etc. Qualification on a task basis serves to break up training into manageable pieces and expedites qualification of candidates to perform specific production activities. The
Perceived Indications, Safety and Efficacy of Perinatal Use of ...

African Journals Online (AJOL)

Cheboi SK

Subjects and Methods: A descriptive cross- sectional ... easy labour and safe delivery (39.6%); and treatment of common ailments (28.5%). Majority ... structures for censoring, training, regulation of TM practice and safety of remedies used.
9 CFR 318.310 - Personnel and training.

Science.gov (United States)

2010-01-01

... Section 318.310 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY... Canning and Canned Products § 318.310 Personnel and training. All operators of thermal processing systems...
Strategies of training as a part of radiation protection and nuclear safety in the 21st century

International Nuclear Information System (INIS)

Tafuni, O.

2009-01-01

Elaboration of national strategies and national training system is one of the main direction in the field of radio protection and nuclear safety in the Republic of Moldova. Necessary seminars and advanced training courses are held in the country and abroad, as well as the educational and informational materials are published to obtain these objectives. Scientific personnel of high educational institutions and specialists in the field of nuclear safety take part in accomplishment of the strategy. The demands of International and European organizations in this field are taken into consideration
Promoting job safety for workers with intellectual disabilities: the staying safe at work training curriculum.

Science.gov (United States)

Dewey, Robin

2011-01-01

In the United States, approximately 125,000 people with disabilities are employed through Community Rehabilitation Programs in manufacturing, assembly, and service jobs. These jobs have significant hazards and, consequently, the workers are at risk of injury. Training that empowers workers to participate in prevention efforts can help reduce work-related injuries. In general this kind of health and safety training in the United States is limited. It is even more so for workers with intellectual disabilities, in part because there have not been programs for teaching individuals with cognitive challenges health and safety skills, adapted to their learning needs. This paper describes the development and promotion of the Staying Safe at Work curriculum of UC Berkeley's Labor Occupational Health Program, which is designed for use by support agencies and employers of workers with intellectual disabilities. The goal of this program is to teach these workers essential occupational safety and health skills in a manner they can understand.
Training Requirements in OSHA Standards and Training Guidelines.

Science.gov (United States)

Occupational Safety and Health Administration, Washington, DC.

This booklet contains Occupational Safety and Health Administration (OSHA) training requirements, excerpted from OSHA standards. The booklet is designed to help employers, safety and health professionals, training directors, and others who need to know training requirements. (Requirements for posting information, warning signs, labels, and the…
Training in nuclear and radiation safety in Latin American and Caribbean; Capacitacion en seguridad nuclear y radiologica en America Latina y el Caribe

Energy Technology Data Exchange (ETDEWEB)

Papadopulos, S.; Diaz, O.; Larcher, A.; Echenique, L.; Nicolas, R., E-mail: spapadopulos@arn.gob.ar, E-mail: odiaz@arn.gob.ar, E-mail: alarcher@arn.gob.ar, E-mail: lechenique@arn.gob.ar, E-mail: rnicolas@arn.gob.ar [Autoridad Regulatoria Nuclear (ARN), Buenos Aires (Argentina); Lombardi, R.; Quintana, G., E-mail: alombar@fi.uba, E-mail: quinta@fi.uba.ar [Universidad de Buenos Aires (FI/UBA), (Argentina). Facultad de Ingenieria

2013-07-01

From thirty-three years, Argentina has taken the commitment to train professionals in the field of nuclear and radiation safety for the care and protection of workers and public in general. Sponsored by the IAEA and supported by the Faculty of Engineering of the University of Buenos Aires (FIUBA), an undertaking was made to encourage the training of scientists and experts in the countries of the region in order to establish a strong safety culture in radiation in individuals and maintaining high standards of safety practices using ionizing radiation. In 2012, the Graduate Course in Radiation Protection and Safety of Radiation Sources has acquired the status of 'Specialization' of the FIUBA, a category that further hierarchies skills training in the subject. This is a highly anticipated achievement by the implications for academic institutions, national and regional level, contributing to the strengthening of the Regional Training Center for Latin America and the Caribbean, acknowledged in a long-term agreement between the IAEA and Argentina in September 2008. Due to increased demand for nuclear activity, it is important to continue and deepen further training in radiological and nuclear areas. In order to satisfy both national and regional needs a process of increase on training offer training is being carried out, under the jurisdiction frame of the Nuclear Regulatory Authority. This paper presents the achievements of the country so far as regards training of human resource in radiation protection and nuclear safety in the region and highlights the challenges ahead for the extension of the offer in education and training. (author)
Patient safety culture in out-of-hours primary care services in the Netherlands: a cross-sectional survey.

NARCIS (Netherlands)

Smits, M.; Keizer, E.; Giesen, P.; Deilkas, E.C.T.; Hofoss, D.; Bondevik, G.T

2018-01-01

Objective: To examine patient safety culture in Dutch out-of-hours primary care using the safety attitudes questionnaire (SAQ) which includes five factors: teamwork climate, safety climate, job satisfaction, perceptions of management and communication openness. Design: Cross-sectional observational
Exploiting Science: Enhancing the Safety Training of Pilots to Reduce the Risk of Bird Strikes

Science.gov (United States)

Mendonca, Flavio A. C.

Analysis of bird strikes to aviation in the U.S. from 1990 to 2015 indicate that the successful mitigation efforts at airports, which must be sustained, have reduced incidents with damage and a negative effect-on-flight since 2000. However, such efforts have done little to reduce strikes outside the airport jurisdiction, such as occurred with US Airways Flight 1549 in 2009. There are basically three strategies to mitigate the risk of bird strikes: standards set by aviation authorities, technology, and actions by crewmembers. Pilots play an important role as stakeholders in the prevention of bird strikes, especially outside the airport environment. Thus, safety efforts require enhanced risk management and aeronautical decision-making training for flight crews. The purpose of this study was to determine if a safety training protocol could effectively enhance CFR Part 141 general aviation pilots' knowledge and skills to reduce the risk of bird strikes to aviation. Participants were recruited from the Purdue University professional flight program and from Purdue Aviation. The researcher of this study used a pretest posttest experimental design. Additionally, qualitative data were collected through open-ended questions in the pretest, posttest, and a follow-up survey questionnaire. The participants' pretest and posttest scores were analyzed using parametric and nonparametric tests. Results indicated a significant increase in the posttest scores of the experimental group. An investigation of qualitative data showed that the topic "safety management of bird hazards by pilots" is barely covered during the ground and flight training of pilots. Furthermore, qualitative data suggest a misperception of the safety culture tenets and a poor familiarity with the safety risk management process regarding bird hazards. Finally, the researcher presented recommendations for practice and future research.
Finnish solution to increased basic professional training needs in nuclear safety

International Nuclear Information System (INIS)

Kyrki-Ramaeki, R.; Koskinen, K.

2008-01-01

The Finnish nuclear energy organizations have in cooperation arranged basic professional training courses on nuclear safety due to fast increased education needs. Especially the new nuclear power plant construction project turned the situation acute, but there was also a need to preserve the tacit knowledge of many nuclear experts retiring within the next ten years. From 2003, the YK courses have been arranged five times with altogether 270 participants. The need of this kind of complementary education is still seen high in Finland, and the YK6 course is to be arranged during the next winter. There has not been seen to be legal incompetence due to the likelihood of bias in the education even that the participating organizations have differing and/or opposing roles. It is seen that a real safety culture presumes that nuclear safety is a common goal, and even the competition for market shares is no obstacle for cooperation. (authors)
Major Results from 1-Train Passive Safety System Tests for the SMART Design with the SMART-ITL Facility

Energy Technology Data Exchange (ETDEWEB)

Park, Hyun-Sik; Bae, Hwang; Ryu, Sung-Uk; Jeon, Byong-Guk; Ruy, Hyobong; Kim, Woo-Shik; Byun, Sun-Joon; Shin, Yong-Cheol; Min, Kyoung-Ho; Yi, Sung-Jae [KAERI, Daejeon (Korea, Republic of)

2015-05-15

To satisfy the domestic and international needs for nuclear safety improvement after the Fukushima accident, an effort to improve its safety has been studied, and a Passive Safety System (PSS) for SMART has been designed. In addition, an Integral Test Loop for the SMART design (SMART-ITL, or FESTA) has been constructed and it finished its commissioning tests in 2012. Consequently, a set of Design Base Accident (DBA) scenarios have been simulated using SMARTITL. Recently, a test program to validate the performance of the SMART PSS was launched and its scaled-down test facility was additionally installed at the existing SMART-ITL facility. In this paper, the major results from the 1-train passive safety system validation tests with the SMARTITL facility will be summarized. The acquired data will be used to validate the safety analysis code and its related models, to evaluate the performance of SMART PSS, and to provide base data during the application phase of the SDA revision and construction licensing. In this paper, the major results from the validation tests of the SMART passive safety system using a 1-train test facility were summarized. They include a dozen of SMART PSS tests using 1-train SMART PSS tests. From the test results, it was estimated that the SMART PSS has sufficient cooling capability to deal with the SBLOCA scenario of SMART. During the SBLOCA scenario, in the CMT, the water layer inventory was well stratified thermally and the safety injection water was injected efficiently into the RPV from the initial period, and cools down the RCS properly.
Occupational Health and Safety. Numeracy. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Tully, Chris

This publication contains the three numeracy units of the three levels of Support Materials for Agricultural Training (SMAT) in the area of occupational health and safety: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her numeracy skills needed to deal with occupational safety and…
Evaluation of aviation-based safety team training in a hospital in The Netherlands

NARCIS (Netherlands)

de Korne, Dirk F.; van Wijngaarden, Jeroen D. H.; van Dyck, Cathy; Hiddema, U. Francis; Klazinga, Niek S.

2014-01-01

Purpose - The purpose of this paper is to evaluate the implementation of a broad-scale team resource management (TRM) program on safety culture in a Dutch eye hospital, detailing the program's content and procedures. Aviation-based TRM training is recognized as a useful approach to increase patient
Graphs of neutron cross sections in JSD1000 for radiation shielding safety analysis

International Nuclear Information System (INIS)

Yamano, Naoki

1984-03-01

Graphs of neutron cross sections and self-shielding factors in the JSD1000 library are presented for radiation shielding safety analysis. The compilation contains various reaction cross sections for 42 nuclides from 1 H to 241 Am in the energy range from 3.51 x 10 -4 eV to 16.5 MeV. The Bondarenko-type self-shielding factors of each reaction are given by the background cross sections from σ 0 = 0 to σ 0 = 10000. (author)
New control and safety rod unit for the training reactor of the Dresden Technical University

International Nuclear Information System (INIS)

Adam, E.; Schab, J.; Knorr, J.

1983-01-01

The extension of the experimental training of students at the training reactor AKR of the Dresden Technical University requires the reconstruction of the reactor with a new control and safety rod unit. The specific conditions at the AKR led to a new variant. Results of preliminary experiments, design and mode of operation of the first unit as well as hitherto gained operation experiences are presented. (author)
What stage are low-income and middle-income countries (LMICs) at with patient safety curriculum implementation and what are the barriers to implementation? A two-stage cross-sectional study.

Science.gov (United States)

Ginsburg, Liane R; Dhingra-Kumar, Neelam; Donaldson, Liam J

2017-06-15

The improvement of safety in healthcare worldwide depends in part on the knowledge, skills and attitudes of staff providing care. Greater patient safety content in health professional education and training programmes has been advocated internationally. While WHO Patient Safety Curriculum Guides (for Medical Schools and Multi-Professional Curricula) have been widely disseminated in low-income and middle-income countries (LMICs) over the last several years, little is known about patient safety curriculum implementation beyond high-income countries. The present study examines patient safety curriculum implementation in LMICs. Two cross-sectional surveys were carried out. First, 88 technical officers in Ministries of Health and WHO country offices were surveyed to identify the pattern of patient safety curricula at country level. A second survey followed that gathered information from 71 people in a position to provide institution-level perspectives on patient safety curriculum implementation. The majority, 69% (30/44), of the countries were either considering whether to implement a patient safety curriculum or actively planning, rather than actually implementing, or embedding one. Most organisations recognised the need for patient safety education and training and felt a safety curriculum was compatible with the values of their organisation; however, important faculty-level barriers to patient safety curriculum implementation were identified. Key structural markers, such as dedicated financial resources and relevant assessment tools to evaluate trainees' patient safety knowledge and skills, were in place in fewer than half of organisations studied. Greater attention to patient safety curriculum implementation is needed. The barriers to patient safety curriculum implementation we identified in LMICs are not unique to these regions. We propose a framework to act as a global standard for patient safety curriculum implementation. Educating leaders through the system in
Safety Training: places available in July / August 2012

CERN Multimedia

2012-01-01

There are places available in the forthcoming Safety courses. For updates and to register, please refer to the Safety Training Catalogue. July / August 2012 (alphabetical order) Radiological Protection 02-JUL-12, 8.30 – 12.30, in English 06-JUL-12, 13.30 – 17.30, in English 12-JUL-12, 8.30 – 12.30, in English 19-JUL-12, 13.30 – 17.30, in English 27-JUL-12, 8.30 – 12.30, in English 10-AUG-12, 8.30 – 12.30, in English 21-AUG-12, 8.30 – 12.30, in English 24-AUG-12, 13.30 – 17.30, in English 28-AUG-12, 8.30 – 12.30, in English 31-AUG-12, 13.30 – 17.30, in English Refresher course for driving forklifts 03-JUL-12, 8.00 – 17.30, in French (with possibility to have the handouts in English) Refresher course for Electricians in Low voltage 29-AUG-12 to 30-AUG-12, 9.00 – 17.30, in French Refresher course for Electricians in Low and High voltage 30-AUG-12 to 31-AUG-12, .00 ...
Apprentice or Student? The Structures of Construction Industry Vocational Education and Training in Denmark and Sweden and their Possible Consequences for Safety Learning

DEFF Research Database (Denmark)

Grytnes, Regine; Grill, Martin; Pousette, Anders

2018-01-01

There is a notable difference in occupational injury rates in the two Scandinavian countries, Sweden and Denmark, with the latter having a 40% higher rate of fatal occupational injuries in the construction industry. This study explored differences in the vocational education and training (VET......) systems between Sweden and Denmark that may be important for students’ safety learning and practice during VET. In both countries, students participate in full-time education, and the curriculum includes school-based as well as company- based training. However, during company- based training Swedish...... for their safety practices and also for the teachers’ position to influence safety learning and practices during company-based training. An analysis of interview and survey data focusing on how VET students enact safety ‘knowings’ across learning sites, suggest how different forms of connectivity models in VET...
77 FR 16862 - Proposed Information Collection Request; Training, Training Plans, and Records

Science.gov (United States)

2012-03-22

...; Training, Training Plans, and Records AGENCY: Mine Safety and Health Administration, Labor. ACTION: Request... proposed extension of the information collection related to training, training plans, and records at these.... Agency: Mine Safety and Health Administration. Title: Part 46--Training, Training Plans, and Records. OMB...
Applying the Trigger Review Method after a brief educational intervention: potential for teaching and improving safety in GP specialty training?

Science.gov (United States)

McKay, John; de Wet, Carl; Kelly, Moya; Bowie, Paul

2013-08-30

The Trigger Review Method (TRM) is a structured approach to screening clinical records for undetected patient safety incidents (PSIs) and identifying learning and improvement opportunities. In Scotland, TRM participation can inform GP appraisal and has been included as a core component of the national primary care patient safety programme that was launched in March 2013. However, the clinical workforce needs up-skilled and the potential of TRM in GP training has yet to be tested. Current TRM training utilizes a workplace face-to-face session by a GP expert, which is not feasible. A less costly, more sustainable educational intervention is necessary to build capability at scale. We aimed to determine the feasibility and impact of TRM and a related training intervention in GP training. We recruited 25 west of Scotland GP trainees to attend a 2-hour TRM workshop. Trainees then applied TRM to 25 clinical records and returned findings within 4-weeks. A follow-up feedback workshop was held. 21/25 trainees (84%) completed the task. 520 records yielded 80 undetected PSIs (15.4%). 36/80 were judged potentially preventable (45%) with 35/80 classified as causing moderate to severe harm (44%). Trainees described a range of potential learning and improvement plans. Training was positively received and appeared to be successful given these findings. TRM was valued as a safety improvement tool by most participants. This small study provides further evidence of TRM utility and how to teach it pragmatically. TRM is of potential value in GP patient safety curriculum delivery and preparing trainees for future safety improvement expectations.

20 CFR 641.640 - How do the private sector training activities authorized under section 502(e) differ from other...

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false How do the private sector training activities... COMMUNITY SERVICE EMPLOYMENT PROGRAM Private Sector Training Projects Under Section 502(e) of the OAA § 641.640 How do the private sector training activities authorized under section 502(e) differ from other...
9 CFR 381.310 - Personnel and training.

Science.gov (United States)

2010-01-01

... INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Canning and Canned Products § 381.310... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Personnel and training. 381.310 Section 381.310 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE...
Evaluation of aviation-based safety team training in a hospital in The Netherlands

NARCIS (Netherlands)

de Korne, D.F.; van Wijngaarden, J.D.H.; van Dyck, C.; Hiddema, F.; Klazinga, N.S.

2014-01-01

Purpose – The purpose of this paper is to evaluate the implementation of a broad-scale team resource management (TRM) program on safety culture in a Dutch eye hospital, detailing the program’s content and procedures. Aviation-based TRM training is recognized as a useful approach to increase patient
Evaluation of aviation-based safety team training in a hospital in The Netherlands

NARCIS (Netherlands)

D.F. de Korne (Dirk); J.D.H. van Wijngaarden (Jeroen); C. van Dyck (Cathy); U.F. Hiddema (Frans); N.S. Klazinga (Niek)

2014-01-01

textabstractPurpose – The purpose of this paper is to evaluate the implementation of a broad-scale team resource management (TRM) program on safety culture in a Dutch eye hospital, detailing the program’s content and procedures. Aviation-based TRM training is recognized as a useful approach to
Effectiveness of Occupational Health and Safety Training: A Systematic Review with Meta-Analysis

Science.gov (United States)

Ricci, Federico; Chiesi, Andrea; Bisio, Carlo; Panari, Chiara; Pelosi, Annalisa

2016-01-01

Purpose: This meta-analysis aims to verify the efficacy of occupational health and safety (OHS) training in terms of knowledge, attitude and beliefs, behavior and health. Design/methodology/approach: The authors included studies published in English (2007-2014) selected from ten databases. Eligibility criteria were studies concerned with the…
Training and qualification of health and safety technicians at a national laboratory

International Nuclear Information System (INIS)

Egbert, W.F.; Trinoskey, P.A.

1994-10-01

Over the last 30 years, Lawrence Livermore National Laboratory (LLNL) has successfully implemented the concept of a multi-disciplined technician. LLNL Health and Safety Technicians have responsibilities in industrial hygiene, industrial safety, health physics, as well as fire, explosive, and criticality safety. One of the major benefits to this approach is the cost-effective use of workers who display an ownership of health and safety issues which is sometimes lacking when responsibilities are divided. Although LLNL has always promoted the concept of a multi-discipline technician, this concept is gaining interest within the Department of Energy (DOE) community. In November 1992, individuals from Oak Ridge Institute of Science and Education (ORISE) and RUST Geotech, joined by LLNL established a committee to address the issues of Health and Safety Technicians. In 1993, the DOE Office of Environmental, Safety and Health, in response to the Defense Nuclear Facility Safety Board Recommendation 91-6, stated DOE projects, particularly environmental restoration, typically present hazards other than radiation such as chemicals, explosives, complex construction activities, etc., which require additional expertise by Radiological Control Technicians. They followed with a commitment that a training guide would be issued. The trend in the last two decades has been toward greater specialization in the areas of health and safety. In contrast, the LLNL has moved toward a generalist approach integrating the once separate functions of the industrial hygiene and health physics technician into one function
Safety Culture Enhancement Project. Final Report. A Field Study on Approaches to Enhancement of Safety Culture

Energy Technology Data Exchange (ETDEWEB)

Lowe, Andrew; Hayward, Brent (Dedale Asia Pacific, Albert Park VIC 3206 (Australia))

2006-08-15

results of the Safety Culture Perceptions Questionnaire conducted with site managers to access their opinions about the adequacy of the local safety culture; - a framework of safety-related competencies for managers, representing desirable actions for leading and promoting a positive safety culture; - results of an evaluation survey completed by participants at the conclusion of the Management Workshops to assess the utility of this activity. Section 4 of the report, Recommendations for Future Action, highlights nine proposed activities that could be undertaken to build on the outcomes from this project, to support the enhancement of safety culture within the Swedish nuclear industry in the longer term. Specifically, these recommendations propose actions to: 1. Introduce formal processes to ensure the ongoing development of safety related competencies amongst industry managers. 2. Strengthen the resources, contribution, value and profile of Man Technology Organisation (MTO) expertise within nuclear industry sites, in order to promote a better understanding of human performance issues, enhance error management and accident prevention capabilities. 3. Identify ways to embed existing positive safety culture attributes, in an environment of considerable workforce changes resulting from increasing use of contractors and (expected) retirements amongst an ageing industry employee population. 4. Standardise and improve aspects of incident and accident investigation processes and analysis methodologies currently used, to improve information sharing and optimise learning. 5. Implement harmonised MTO / human factors awareness training programs at appropriate levels for all nuclear industry personnel. 6. Formalise the application of applied teamwork training (as per the principles of Crew Resource Management training in aviation) for NPP Control Room Operators, Maintenance workers and other employees working in safety-critical teams. 7. Increase the use of simulation training to
Patients for patient safety in China: a cross sectional study.

Science.gov (United States)

Zhang, Qiongwen; Li, Yulin; Li, Jing; Mao, Xuanyue; Zhang, Lijuan; Ying, Qinghua; Wei, Xin; Shang, Lili; Zhang, Mingming

2012-02-01

To investigate the baseline status of patients' awareness, knowledge, and attitudes to patient safety in China, and to determine the factors that influence patients' involvement in patient safety. We conducted a cross sectional survey using questionnaires adapted from recent studies on patient safety from outside China. The items included medical errors, infection, medication safety, and other aspects of patient safety. The questionnaire included 17 items and 5 domains. The survey was conducted between Jan. 2009 and Dec. 2010 involving 1000 patients from ten grade-A hospitals in seven provinces or cities in China. Most patients from the surgery departments completed the questionnaires voluntarily and anonymously. Five reviewers independently input the data into Microsoft Excel 2003, and the data were double-checked. Data were analyzed using SPSS 15.0 software for differences in the perceptions and attitudes of patients toward patient safety among different genders, ages, and regions. We distributed 1000 questionnaires and collected 959 completed questionnaires (response rate: 96%). Among the respondents, 58% of patients did not know what medical error is. Sixty-five percent of patients wanted disclosure of all medical errors. After errors occurred, 58% of patients wanted explanations of all possible harms that had resulted. Among 187 patients who had experienced medical errors, 83% of patients had sought appropriate legal action. About 52% of patients understood hospital infection, but 28% patients did not know that infections could occur in hospital. Seventy-eight percent of patients thought that medical staff should wash their hands before examining patients. More than half of the patients (68%) were willing to remind the staff of hygiene if they saw unsanitary conditions in a health clinic. Only 14% of patients knew the side effects of medications that they took. The majority of patients surveyed expressed willingness to contribute to patient safety, but their
Safety and feasibility of inpatient exercise training in pediatric heart failure: a preliminary report.

Science.gov (United States)

McBride, Michael G; Binder, Tracy Jo; Paridon, Stephen M

2007-01-01

To determine the safety and feasibility of an inpatient exercise training program for a group of pediatric heart transplantation candidates on multiple inotropic support. Children with end-stage heart disease often require heart transplantation. Currently, no data exist on the safety and feasibility of an inpatient exercise training program in pediatric patients awaiting heart transplantation while on inotropic support. Twenty ambulatory patients (11 male; age, 13.6 +/- 3.2 years) were admitted, listed, and subsequently enrolled into an exercise training program while awaiting heart transplantation. Patient diagnoses consisted of dilated cardiomyopathy (n = 15), restrictive cardiomyopathy (n = 1), and failing single-ventricle physiology (n = 4). Inotropic support consisted of a combination of dobutamine, dopamine, or milrinone. Exercise sessions were scheduled three times a week lasting from 30 to 60 minutes and consisted of aerobic and musculoskeletal conditioning. Over 6.2 +/- 4.2 months, 1,251 of a possible 1,508 exercise training sessions were conducted, with a total of 615 hours (26.3 +/- 2.7 min/session) dedicated to low-intensity aerobic exercise. Reasons for noncompliance included a change in medical status, staffing, or patient cooperation. Two adverse episodes (seizures) occurred, neither of which resulted in termination from the program. No adverse episodes of hypotension or significant complex arrhythmias occurred. No complication of medication administration or loss of intravenous access occurred. Data from this study indicate that pediatric patients on inotropic support as a result of systemic ventricular or biventricular heart failure can safely participate in exercise training programs with relatively moderate to high compliance.
Structural analysis of a rehabilitative training system based on a ceiling rail for safety of hemiplegia patients.

Science.gov (United States)

Kim, Kyong; Song, Won Kyung; Chong, Woo Suk; Yu, Chang Ho

2018-04-17

The body-weight support (BWS) function, which helps to decrease load stresses on a user, is an effective tool for gait and balance rehabilitation training for elderly people with weakened lower-extremity muscular strength, hemiplegic patients, etc. This study conducts structural analysis to secure user safety in order to develop a rail-type gait and balance rehabilitation training system (RRTS). The RRTS comprises a rail, trolley, and brain-machine interface. The rail (platform) is connected to the ceiling structure, bearing the loads of the RRTS and of the user and allowing locomobility. The trolley consists of a smart drive unit (SDU) that assists the user with forward and backward mobility and a body-weight support (BWS) unit that helps the user to control his/her body-weight load, depending on the severity of his/her hemiplegia. The brain-machine interface estimates and measures on a real-time basis the body-weight (load) of the user and the intended direction of his/her movement. Considering the weight of the system and the user, the mechanical safety performance of the system frame under an applied 250-kg static load is verified through structural analysis using ABAQUS (6.14-3) software. The maximum stresses applied on the rail and trolley under the given gravity load of 250 kg, respectively, are 18.52 MPa and 48.44 MPa. The respective safety factors are computed to be 7.83 and 5.26, confirming the RRTS's mechanical safety. An RRTS with verified structural safety could be utilized for gait movement and balance rehabilitation and training for patients with hemiplegia.
Methodology for safety optimization of highway cross-sections for horizontal curves with restricted sight distance.

Science.gov (United States)

Ibrahim, Shewkar E; Sayed, Tarek; Ismail, Karim

2012-11-01

Several earlier studies have noted the shortcomings with existing geometric design guides which provide deterministic standards. In these standards the safety margin of the design output is generally unknown and there is little knowledge of the safety implications of deviating from the standards. To mitigate these shortcomings, probabilistic geometric design has been advocated where reliability analysis can be used to account for the uncertainty in the design parameters and to provide a mechanism for risk measurement to evaluate the safety impact of deviations from design standards. This paper applies reliability analysis for optimizing the safety of highway cross-sections. The paper presents an original methodology to select a suitable combination of cross-section elements with restricted sight distance to result in reduced collisions and consistent risk levels. The purpose of this optimization method is to provide designers with a proactive approach to the design of cross-section elements in order to (i) minimize the risk associated with restricted sight distance, (ii) balance the risk across the two carriageways of the highway, and (iii) reduce the expected collision frequency. A case study involving nine cross-sections that are parts of two major highway developments in British Columbia, Canada, was presented. The results showed that an additional reduction in collisions can be realized by incorporating the reliability component, P(nc) (denoting the probability of non-compliance), in the optimization process. The proposed approach results in reduced and consistent risk levels for both travel directions in addition to further collision reductions. Copyright © 2012 Elsevier Ltd. All rights reserved.
The Nordic programme for nuclear safety 1990-1993

International Nuclear Information System (INIS)

1992-08-01

The status report for the first half of the year 1992 of the Nordic programme for nuclear safety 1990-1993 contains summaries of the progress of the projects under the four sections of the programme. These sections are divided under the main headings of dealing with readiness in abnormal radiation situations, nuclear wastes and deposition, radioecology and reactor safety. The projects included in the first part concern radiation-spreading prognoses and consequences for the area, strategies and methods for measuring and management of exchange of data between decision-makers, evaluation and harmonizing of remedial measures, public information, Nordic exercises in readiness and the determination of radioactive contamination in the area. Projects under the second section concern exemptions from regulatory control of radioactive material, experiences of demolition of uranium cleaning systems, storing of information, handling of radioactive wastes from reactor accidents, transport etc., and geological and climatological processes of significance for long-term safety in a final storage system. The third section of the programme handles training and quality assurance methods, aquatic radioecology, agricultural and natural ecosystems. The fourth section treats data on the safety status of Greifswald I-IV, Leningrad I-IV, Ignalia I-II, ship reactors, Brunsbuettel, Kruemmel and Kola I-IV. The programme's total budget is presented. (AB)
Nuclear criticality safety staff training and qualifications at Los Alamos National Laboratory

International Nuclear Information System (INIS)

Monahan, S.P.; McLaughlin, T.P.

1997-01-01

Operations involving significant quantities of fissile material have been conducted at Los Alamos National Laboratory continuously since 1943. Until the advent of the Laboratory's Nuclear Criticality Safety Committee (NCSC) in 1957, line management had sole responsibility for controlling criticality risks. From 1957 until 1961, the NCSC was the Laboratory body which promulgated policy guidance as well as some technical guidance for specific operations. In 1961 the Laboratory created the position of Nuclear Criticality Safety Office (in addition to the NCSC). In 1980, Laboratory management moved the Criticality Safety Officer (and one other LACEF staff member who, by that time, was also working nearly full-time on criticality safety issues) into the Health Division office. Later that same year the Criticality Safety Group, H-6 (at that time) was created within H-Division, and staffed by these two individuals. The training and education of these individuals in the art of criticality safety was almost entirely self-regulated, depending heavily on technical interactions between each other, as well as NCSC, LACEF, operations, other facility, and broader criticality safety community personnel. Although the Los Alamos criticality safety group has grown both in size and formality of operations since 1980, the basic philosophy that a criticality specialist must be developed through mentoring and self motivation remains the same. Formally, this philosophy has been captured in an internal policy, document ''Conduct of Business in the Nuclear Criticality Safety Group.'' There are no short cuts or substitutes in the development of a criticality safety specialist. A person must have a self-motivated personality, excellent communications skills, a thorough understanding of the principals of neutron physics, a safety-conscious and helpful attitude, a good perspective of real risk, as well as a detailed understanding of process operations and credible upsets
Evaluating the Effectiveness of Traditional Training Methods in Non-Traditional Training Programs for Adult Learners through a Pre-Test/Post-Test Comparison of Food Safety Knowledge

Science.gov (United States)

Dodd, Caleb D.; Burris, Scott; Fraze, Steve; Doerfert, David; McCulloch, Abigail

2013-01-01

The incorporation of hot and cold food bars into grocery stores in an effort to capture a portion of the home meal replacement industry is presenting new challenges for retail food establishments. To ensure retail success and customer safety, employees need to be educated in food safety practices. Traditional methods of training are not meeting…
The research group, the conference programme and academic training in safety promotion - a report of the activities at Karolinska Institutet, Sweden.

Science.gov (United States)

Hörte, Lars-Gunnar; Jansson, Bjarne; Svanström, Leif

2012-01-01

The research group was established in 1967 at Lund University and moved to Karolinska Institutet in 1980. Work began with epidemiological studies of all injuries in the local community in support of various experimental local interventions. An important element was the creation of 'surveillance systems' in healthcare. The work resulted in the establishment of a WHO Collaborating Centre and an international safety-building programme called 'Safe Communities'. In parallel, training at both master's and doctoral level and the building of a conference programme were embarked upon. The research group consists of three sections. Specific efforts are being made by some countries to address their own injury problems.
Endoscopic non-technical skills team training: the next step in quality assurance of endoscopy training.

Science.gov (United States)

Matharoo, Manmeet; Haycock, Adam; Sevdalis, Nick; Thomas-Gibson, Siwan

2014-12-14

To investigate whether novel, non-technical skills training for Bowel Cancer Screening (BCS) endoscopy teams enhanced patient safety knowledge and attitudes. A novel endoscopy team training intervention for BCS teams was developed and evaluated as a pre-post intervention study. Four multi-disciplinary BCS teams constituting BCS endoscopist(s), specialist screening practitioners, endoscopy nurses and administrative staff (A) from English BCS training centres participated. No patients were involved in this study. Expert multidisciplinary faculty delivered a single day's training utilising real clinical examples. Pre and post-course evaluation comprised participants' patient safety awareness, attitudes, and knowledge. Global course evaluations were also collected. Twenty-three participants attended and their patient safety knowledge improved significantly from 43%-55% (P ≤ 0.001) following the training intervention. 12/41 (29%) of the safety attitudes items significantly improved in the areas of perceived patient safety knowledge and awareness. The remaining safety attitude items: perceived influence on patient safety, attitudes towards error management, error management actions and personal views following an error were unchanged following training. Both qualitative and quantitative global course evaluations were positive: 21/23 (91%) participants strongly agreed/agreed that they were satisfied with the course. Qualitative evaluation included mandating such training for endoscopy teams outside BCS and incorporating team training within wider endoscopy training. Limitations of the study include no measure of increased patient safety in clinical practice following training. A novel comprehensive training package addressing patient safety, non-technical skills and adverse event analysis was successful in improving multi-disciplinary teams' knowledge and safety attitudes.
Endoscopic non-technical skills team training: The next step in quality assurance of endoscopy training

Science.gov (United States)

Matharoo, Manmeet; Haycock, Adam; Sevdalis, Nick; Thomas-Gibson, Siwan

2014-01-01

AIM: To investigate whether novel, non-technical skills training for Bowel Cancer Screening (BCS) endoscopy teams enhanced patient safety knowledge and attitudes. METHODS: A novel endoscopy team training intervention for BCS teams was developed and evaluated as a pre-post intervention study. Four multi-disciplinary BCS teams constituting BCS endoscopist(s), specialist screening practitioners, endoscopy nurses and administrative staff (A) from English BCS training centres participated. No patients were involved in this study. Expert multidisciplinary faculty delivered a single day’s training utilising real clinical examples. Pre and post-course evaluation comprised participants’ patient safety awareness, attitudes, and knowledge. Global course evaluations were also collected. RESULTS: Twenty-three participants attended and their patient safety knowledge improved significantly from 43%-55% (P ≤ 0.001) following the training intervention. 12/41 (29%) of the safety attitudes items significantly improved in the areas of perceived patient safety knowledge and awareness. The remaining safety attitude items: perceived influence on patient safety, attitudes towards error management, error management actions and personal views following an error were unchanged following training. Both qualitative and quantitative global course evaluations were positive: 21/23 (91%) participants strongly agreed/agreed that they were satisfied with the course. Qualitative evaluation included mandating such training for endoscopy teams outside BCS and incorporating team training within wider endoscopy training. Limitations of the study include no measure of increased patient safety in clinical practice following training. CONCLUSION: A novel comprehensive training package addressing patient safety, non-technical skills and adverse event analysis was successful in improving multi-disciplinary teams’ knowledge and safety attitudes. PMID:25516665
The impact of a medical procedure service on patient safety, procedure quality and resident training opportunities.

Science.gov (United States)

Tukey, Melissa H; Wiener, Renda Soylemez

2014-03-01

At some academic hospitals, medical procedure services are being developed to provide supervision for residents performing bedside procedures in hopes of improving patient safety and resident education. There is limited knowledge of the impact of such services on procedural complication rates and resident procedural training opportunities. To determine the impact of a medical procedure service (MPS) on patient safety and resident procedural training opportunities. Retrospective cohort analysis comparing characteristics and outcomes of procedures performed by the MPS versus the primary medical service. Consecutive adults admitted to internal medicine services at a large academic hospital who underwent a bedside medical procedure (central venous catheterization, thoracentesis, paracentesis, lumbar puncture) between 1 July 2010 and 31 December 2011. The primary outcome was a composite rate of major complications. Secondary outcomes included resident participation in bedside procedures and use of "best practice" safety process measures. We evaluated 1,707 bedside procedures (548 by the MPS, 1,159 by the primary services). There were no differences in the composite rate of major complications (1.6 % vs. 1.9 %, p = 0.71) or resident participation in bedside procedures (57.0 % vs. 54.3 %, p = 0.31) between the MPS and the primary services. Procedures performed by the MPS were more likely to be successfully completed (95.8 % vs. 92.8 %, p = 0.02) and to use best practice safety process measures, including use of ultrasound guidance when appropriate (96.8 % vs. 90.0 %, p = 0.0004), avoidance of femoral venous catheterization (89.5 vs. 82.7 %, p = 0.02) and involvement of attending physicians (99.3 % vs. 57.0 %, p < 0.0001). Although use of a MPS did not significantly affect the rate of major complications or resident opportunities for training in bedside procedures, it was associated with increased use of best practice safety process measures.
Maintenance, surveillance and in-service inspection in nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2002-01-01

Effective maintenance, surveillance and in-service inspection (MS and I) are essential for the safe operation of a nuclear power plant. The objective of this Safety Guide is to provide recommendations and guidance for MS and I activities to ensure that SSCs important to safety are available to perform their functions in accordance with the assumptions and intent of the design. This Safety Guide covers the organizational and procedural aspects of MS and I. However, it does not give detailed technical advice in relation to particular items of plant equipment, nor does it cover inspections made for and/or by the regulatory body. This Safety Guide provides recommendations and guidance for preventive and remedial measures, including testing, surveillance and in-service inspection, that are necessary to ensure that all plant structures, systems and components (SSCs) important to safety are capable of performing as intended. This Safety Guide covers measures for fulfilling the organizational and administrative requirements for: establishing and implementing schedules for preventive and predictive maintenance, repairing defective plant items, selecting and training personnel, providing related facilities and equipment, procuring stores and spare parts, and generating, collecting and retaining maintenance records for establishing and implementing an adequate feedback system for information on maintenance. MS and I should be subject to quality assurance in relation to all aspects important to safety. Quality assurance has been dealt with in detail in other IAEA safety standards and is covered here only in specific instances, for emphasis. In Section 2, a concept of MS and I is presented and the interrelationship between maintenance, surveillance and inspection is discussed. Section 3 concerns the functions and responsibilities of different organizations involved in MS and I activities. Section 4 provides recommendations and guidance on such organizational aspects as
Maintenance, surveillance and in-service inspection in nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2005-01-01

Effective maintenance, surveillance and in-service inspection (MS and I) are essential for the safe operation of a nuclear power plant. The objective of this Safety Guide is to provide recommendations and guidance for MS and I activities to ensure that SSCs important to safety are available to perform their functions in accordance with the assumptions and intent of the design. This Safety Guide covers the organizational and procedural aspects of MS and I. However, it does not give detailed technical advice in relation to particular items of plant equipment, nor does it cover inspections made for and/or by the regulatory body. This Safety Guide provides recommendations and guidance for preventive and remedial measures, including testing, surveillance and in-service inspection, that are necessary to ensure that all plant structures, systems and components (SSCs) important to safety are capable of performing as intended. This Safety Guide covers measures for fulfilling the organizational and administrative requirements for: establishing and implementing schedules for preventive and predictive maintenance, repairing defective plant items, selecting and training personnel, providing related facilities and equipment, procuring stores and spare parts, and generating, collecting and retaining maintenance records for establishing and implementing an adequate feedback system for information on maintenance. MS and I should be subject to quality assurance in relation to all aspects important to safety. Quality assurance has been dealt with in detail in other IAEA safety standards and is covered here only in specific instances, for emphasis. In Section 2, a concept of MS and I is presented and the interrelationship between maintenance, surveillance and inspection is discussed. Section 3 concerns the functions and responsibilities of different organizations involved in MS and I activities. Section 4 provides recommendations and guidance on such organizational aspects as

A cascade method of training for the revised CEGB Radiological Safety Rules and the Ionising Radiations Regulations 1985

International Nuclear Information System (INIS)

Jackson, J.R.; John, P.G.L.

1986-01-01

In order to achieve compliance with the Ionising Radiations Regulations 1985 the CEGB has introduced a revised set of Radiological Safety Rule. These Rules are for implementation at all sites under the Board's control where ionising radiations are used. It was a requirement that the new Safety Rules be brought into operation on a common date and to a consistent standard of performance throughout the industry; this necessitated a considerable training programme to familiarise and inform some 8,000 staff working at a large number of locations. The training week of identified groups of staff varied widely, according to their different levels of authority and responsibility. The paper sets out the means by which the chosen cascade method of training was selected and developed, and gives details of the modular package of training material which was produced. It also relates how the management objectives were met within the constraints of an uncompromising time schedule. (author)
Laser Safety Inspection Criteria

International Nuclear Information System (INIS)

Barat, K

2005-01-01

A responsibility of the Laser Safety Officer (LSO) is to perform laser safety audits. The American National Standard Z136.1 Safe use of Lasers references this requirement in several sections: (1) Section 1.3.2 LSO Specific Responsibilities states under Hazard Evaluation, ''The LSO shall be responsible for hazards evaluation of laser work areas''; (2) Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''; and (3) Appendix D, under Survey and Inspections, it states, ''the LSO will survey by inspection, as considered necessary, all areas where laser equipment is used''. Therefore, for facilities using Class 3B and or Class 4 lasers, audits for laser safety compliance are expected to be conducted. The composition, frequency and rigueur of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms. In many institutions, a sole Laser Safety Officer (LSO) or a number of Deputy LSO's perform these audits. For that matter, there are institutions that request users to perform a self-assessment audit. Many items on the common audit list and the associated findings are subjective because they are based on the experience and interest of the LSO or auditor in particular items on the checklist. Beam block usage is an example; to one set of eyes a particular arrangement might be completely adequate, while to another the installation may be inadequate. In order to provide more consistency, the National Ignition Facility Directorate at Lawrence Livermore National Laboratory (NIF-LLNL) has established criteria for a number of items found on the typical laser safety audit form. These criteria are distributed to laser users, and they serve two broad purposes: first, it gives the user an expectation of what will be reviewed by an auditor, and second, it is an
Child Passenger Safety Training for Pediatric Interns: Does it Work?

Science.gov (United States)

Morrissey, Dina; Riese, Alison; Violano, Pina; Lapidus, Garry; Baird, Janette; Mello, Michael J

2016-03-01

Evaluate the efficacy of a child passenger safety (CPS) educational intervention on the CPS-related knowledge, attitude and anticipatory guidance behaviors of pediatric interns. All subjects were surveyed at baseline and 6 months. Intervention interns attended a CPS training module which included viewing an educational video, observing a car seat inspection appointment, hands-on practice and completion of a post-intervention survey. All 16 intervention interns completed the initial survey, the intervention and the immediate-post questionnaire. Thirteen (81%) completed the 6-month follow-up. The baseline survey was completed by 27/40 (67%) of control interns, 28/40 (70%) submitted a follow-up. The proportion of intervention interns who self-reported giving CPS guidance at all well-child visits increased by 31.3% (95% CI 6.1,56.5%); the control group had no change. Similar results were seen with self-reported knowledge and attitude. A CPS training module increases pediatric interns' knowledge, improves attitudes, and self-reported behaviors regarding CPS-related anticipatory guidance.
Experience of Hungarian model project: 'Strengthening training for operational safety at Paks NPP'

International Nuclear Information System (INIS)

Kiss, I.

1998-01-01

Training of Operational Safety at Paks NPP is described including all the features of the project including namely: description of Paks NPP, its properties and performances; reasons for establishing Hungarian Model Project, its main goals, mentioning Hungarian and IAEA experts involved in the Project, its organization, operation, budget, current status together with its short term and long term impact
Safety measures to prevent workplace violence in emergency primary care centres--a cross-sectional study.

Science.gov (United States)

Morken, Tone; Johansen, Ingrid H

2013-10-03

Employees in emergency primary care centres (EPCC) have raised personal safety as an issue. Despite a high risk of experiencing workplace violence at EPCCs in Norway, knowledge regarding applied preventive measures is limited. The description of existing safety measures is an important prerequisite to evaluate and make guidelines for the improvement of preventive practices on a national level. The objective of this study was to investigate to which extent general practitioners work alone in EPCCs in Norway, and to estimate the prevalence of other preventive measures against workplace violence. A survey was sent to the managers of all 210 registered EPCCs in Norway. The questionnaire included 22 items on safety measures, including available staff, architecture and outfitting of the reception and consulting rooms, and the availability of electronic safety systems and training or monitoring systems. The data were analysed using descriptive statistics. Differences between EPCCs staffed by one general practitioner alone and EPCCs with more health personnel on duty were explored. Sixty-one (30%) of the 203 participating EPCCs had more than one person on duty round-the-clock. These EPCCs reported the application of a significantly higher number of safety measures compared to the EPCCs with only one general practitioner on duty during some or part of the 24 hours. Examples of safety measures being more common in highly staffed EPCCs were automatic door locks (p < 0.001), arrangement of furniture in the consulting room ensuring that the patient is not seated between the clinician and the exit (p = 0.014), the possibility of bringing an extra person on emergency call-outs or home visits when needed for security reasons (p = 0.014), and having organised training regarding violence (p < 0.001). This study shows considerable differences between Norwegian EPCCs regarding applied preventive measures, and a higher prevalence of such measures in EPCCs staffed with
Sled Tests Using the Hybrid III Rail Safety ATD and Workstation Tables for Passenger Trains

Science.gov (United States)

2017-08-01

The Hybrid III Rail Safety (H3-RS) anthropomorphic test device (ATD) is a crash test dummy developed in the United Kingdom to evaluate abdomen and lower thorax injuries that occur when passengers impact workstation tables during train accidents. The ...
Reminder: Bike safety – e-learning module still available!

CERN Multimedia

HSE Unit

2014-01-01

The “Safe bike riding” e-learning module offered by the Safety Training Section of the HSE Unit is designed for anyone who uses a bike on the CERN site. The course, which takes around 10 minutes to complete, can be accessed via the SIR application. It presents safety information, such as the road traffic rules, and practical advice, such as the appropriate safety equipment to wear and to have fitted to your bike. Regarding the rules, we would like to remind you that CERN's Safety Code A7 applies to cyclists as well as motorists. The training module was created by the accident prevention service of the HSE Unit after it was noticed that the number of occupational accidents involving cyclists had been constantly increasing since 2008, with a rise from about 20 in 2009 to about 50 in 2013. Since its launch in September 2013, the course has been taken by more than 670 people. It can be completed at any time, in either English or French. The Safety T...
Perception of special olympics coaches on safety in their training of their special olympics athletes

OpenAIRE

Ng, Kum Loy

2009-01-01

A sport coach, besides providing training to improve an athlete's performance in his/her chosen sport, is also tasked for ensuring that the training and/or competition take place in a safe environment. This ability to factor safe practices is a challenge to any sport coach, especially when the people being coached have intellectual disability (ID). This study aims to explore the perceptions of Special Olympics (SO) sport coaches towards risk factors for injuries and safety issues when they co...
Public perception of drinking water safety in South Africa 2002-2009: a repeated cross-sectional study.

Science.gov (United States)

Wright, Jim A; Yang, Hong; Rivett, Ulrike; Gundry, Stephen W

2012-07-27

In low and middle income countries, public perceptions of drinking water safety are relevant to promotion of household water treatment and to household choices over drinking water sources. However, most studies of this topic have been cross-sectional and not considered temporal variation in drinking water safety perceptions. The objective of this study is to explore trends in perceived drinking water safety in South Africa and its association with disease outbreaks, water supply and household characteristics. This repeated cross-sectional study draws on General Household Surveys from 2002-2009, a series of annual nationally representative surveys of South African households, which include a question about perceived drinking water safety. Trends in responses to this question were examined from 2002-2009 in relation to reported cholera cases. The relationship between perceived drinking water safety and organoleptic qualities of drinking water, supply characteristics, and socio-economic and demographic household characteristics was explored in 2002 and 2008 using hierarchical stepwise logistic regression. The results suggest that perceived drinking water safety has remained relatively stable over time in South Africa, once the expansion of improved supplies is controlled for. A large cholera outbreak in 2000-02 had no apparent effect on public perception of drinking water safety in 2002. Perceived drinking water safety is primarily related to water taste, odour, and clarity rather than socio-economic or demographic characteristics. This suggests that household perceptions of drinking water safety in South Africa follow similar patterns to those observed in studies in developed countries. The stability over time in public perception of drinking water safety is particularly surprising, given the large cholera outbreak that took place at the start of this period.
Research section on optimization of nuclear safety regulation. Summary of research section

International Nuclear Information System (INIS)

Madarame, Haruki

2009-01-01

In order to make the inspection of nuclear facilities more effective, mutual understanding and respect between the regulatory body and the licensees, and a frank, open and yet formal relationship, shall be fostered. Thus the Research Section on Optimization of Nuclear Safety Regulation was established at JSME in 2005, where academic, regulatory and industrial members have frankly discussed for the improvement of inspection system. Agreed on the necessity of system renovation, the optimal inspection system was discussed. Suitable plant shutdown interval for the preventive maintenance was evaluated considering the current monitoring technique. At the same time, the U.S. and European inspection systems were reviewed to learn a lesson. The useful conclusion were published so that each member makes efforts for the effective inspection system. Some of the results have already been referred by the governmental task force on the inspection system improvement, and contributed to the system renovation. (author)
Safety Culture Enhancement Project. Final Report. A Field Study on Approaches to Enhancement of Safety Culture

International Nuclear Information System (INIS)

Lowe, Andrew; Hayward, Brent

2006-08-01

Safety Culture Perceptions Questionnaire conducted with site managers to access their opinions about the adequacy of the local safety culture; - a framework of safety-related competencies for managers, representing desirable actions for leading and promoting a positive safety culture; - results of an evaluation survey completed by participants at the conclusion of the Management Workshops to assess the utility of this activity. Section 4 of the report, Recommendations for Future Action, highlights nine proposed activities that could be undertaken to build on the outcomes from this project, to support the enhancement of safety culture within the Swedish nuclear industry in the longer term. Specifically, these recommendations propose actions to: 1. Introduce formal processes to ensure the ongoing development of safety related competencies amongst industry managers. 2. Strengthen the resources, contribution, value and profile of Man Technology Organisation (MTO) expertise within nuclear industry sites, in order to promote a better understanding of human performance issues, enhance error management and accident prevention capabilities. 3. Identify ways to embed existing positive safety culture attributes, in an environment of considerable workforce changes resulting from increasing use of contractors and (expected) retirements amongst an ageing industry employee population. 4. Standardise and improve aspects of incident and accident investigation processes and analysis methodologies currently used, to improve information sharing and optimise learning. 5. Implement harmonised MTO / human factors awareness training programs at appropriate levels for all nuclear industry personnel. 6. Formalise the application of applied teamwork training (as per the principles of Crew Resource Management training in aviation) for NPP Control Room Operators, Maintenance workers and other employees working in safety-critical teams. 7. Increase the use of simulation training to enhance non
Comparative Investigation on 0.4 inch SBLOCA Scenario with Single and Dual Train Passive Safety Injection Systems using SMART-ITL

Energy Technology Data Exchange (ETDEWEB)

Park, Hyun-Sik; Bae, Hwang; Ryu, Sung-Uk; Jeon, Byong-Guk; Yang, Jin-Hwa; Yun, Eun-Koo; Choi, Nam-Hyun; Min, Kyoung-Ho; Shin, Yong-Cheol; Bang, Yoon-Gon; Kim, Myoung-Jun; Seo, Chan-Jong; Yi, Sung-Jae [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

The Standard Design Approval (SDA) for SMART was certificated in 2012 at the Korea Atomic Energy Research Institute (KAERI). In December 2015, Saudi Arabia and Korea started conducting a three-year project of Pre-Project Engineering (PPE) to prepare a Preliminary Safety Analysis Report (PSAR) and to review the feasibility of constructing SMART reactors in Saudi Arabia. In addition, an Integral Test Loop for the SMART design (SMART-ITL, or FESTA) has been constructed and it finished its commissioning tests in 2012. Consequently, a set of Design Base Accident (DBA) scenarios have been simulated using SMART-ITL. In this paper, a comparative investigation was performed on 0.4 inch SBLOCA scenario with single and dual train passive safety injection systems using SMART-ITL. In this paper, the effect of the train number of PSIS on a SBLOCA scenario is investigated for a break size of 0.4 inch. The single and dual train tests show a similar trend in general but the injected water migrates slightly differently in the RV and is discharged through the break nozzle. The parameters of the RV pressure, RV water level, accumulated break mass, and injection flowrates from the CMT and SIT were compared. Compared with the single train test, the increased injection rates from the two trains of the PSIS during the dual train test raised the RV water level, ensuring the safety of the reactor core.
Patients' evaluations of patient safety in English general practices: a cross-sectional study.

Science.gov (United States)

Ricci-Cabello, Ignacio; Marsden, Kate S; Avery, Anthony J; Bell, Brian G; Kadam, Umesh T; Reeves, David; Slight, Sarah P; Perryman, Katherine; Barnett, Jane; Litchfield, Ian; Thomas, Sally; Campbell, Stephen M; Doos, Lucy; Esmail, Aneez; Valderas, Jose M

2017-07-01

Description of safety problems and harm in general practices has previously relied on information from health professionals, with scarce attention paid to experiences of patients. To examine patient-reported experiences and outcomes of patient safety in primary care. Cross-sectional study in 45 general practices across five regions in the north, centre, and south of England. A version of the Patient Reported Experiences and Outcomes of Safety in Primary Care (PREOS-PC) questionnaire was sent to a random sample of 6736 patients. Main outcome measures included 'practice activation' (what a practice does to create a safe environment); 'patient activation' (how proactive are patients in ensuring safe healthcare delivery); 'experiences of safety events' (safety errors); 'outcomes of safety' (harm); and 'overall perception of safety' (how safe patients rate their practice). Questionnaires were returned by 1244 patients (18.4%). Scores were high for 'practice activation' (mean [standard error] = 80.4 out of 100 [2.0]) and low for 'patient activation' (26.3 out of 100 [2.6]). Of the patients, 45% reported experiencing at least one safety problem in the previous 12 months, mostly related to appointments (33%), diagnosis (17%), patient provider communication (15%), and coordination between providers (14%). Twenty-three per cent of the responders reported some degree of harm in the previous 12 months. The overall assessment of level of safety of practices was generally high (86.0 out of 100 [16.8]). Priority areas for patient safety improvement in general practices in England include appointments, diagnosis, communication, coordination, and patient activation. © British Journal of General Practice 2017.
For beginners in anaesthesia, self-training with an audiovisual checklist improves safety during anaesthesia induction: A prospective, randomised, controlled two-centre study.

Science.gov (United States)

Beck, Stefanie; Reich, Christian; Krause, Dorothea; Ruhnke, Bjarne; Daubmann, Anne; Weimann, Jörg; Zöllner, Christian; Kubitz, Jens

2018-01-31

Beginners in residency programmes in anaesthesia are challenged because working environment is complex, and they cannot rely on experience to meet challenges. During this early stage, residents need rules and structures to guide their actions and ensure patient safety. We investigated whether self-training with an electronic audiovisual checklist app on a mobile phone would produce a long-term improvement in the safety-relevant actions during induction of general anaesthesia. During the first month of their anaesthesia residency, we randomised 26 residents to the intervention and control groups. The study was performed between August 2013 and December 2014 in two university hospitals in Germany. In addition to normal training, the residents of the intervention group trained themselves on well tolerated induction using the electronic checklist for at least 60 consecutive general anaesthesia inductions. After an initial learning phase, all residents were observed during one induction of general anaesthesia. The primary outcome was the number of safety items completed during this anaesthesia induction. Secondary outcomes were similar observations 4 and 8 weeks later. Immediately, and 4 weeks after the first learning phase, residents in the intervention group completed a significantly greater number of safety checks than residents in the control group 2.8 [95% confidence interval (CI) 0.4 to 5.1, P = 0.021, Cohen's d = 0.47] and 3.7 (95% CI 1.3 to 6.1, P = 0.003, Cohen's d = 0.61), respectively. The difference between the groups had disappeared by 8 weeks: mean difference in the number of safety checks at 8 weeks was 0.4, 95% CI -2.0 to 2.8, P = 0.736, Cohen's d = 0.07). The use of an audiovisual self-training checklists improves safety-relevant behaviour in the early stages of a residency training programme in anaesthesia.
Intensive care nurses' perceptions of simulation-based team training for building patient safety in intensive care: a descriptive qualitative study.

Science.gov (United States)

Ballangrud, Randi; Hall-Lord, Marie Louise; Persenius, Mona; Hedelin, Birgitta

2014-08-01

To describe intensive care nurses' perceptions of simulation-based team training for building patient safety in intensive care. Failures in team processes are found to be contributory factors to incidents in an intensive care environment. Simulation-based training is recommended as a method to make health-care personnel aware of the importance of team working and to improve their competencies. The study uses a qualitative descriptive design. Individual qualitative interviews were conducted with 18 intensive care nurses from May to December 2009, all of which had attended a simulation-based team training programme. The interviews were analysed by qualitative content analysis. One main category emerged to illuminate the intensive care nurse perception: "training increases awareness of clinical practice and acknowledges the importance of structured work in teams". Three generic categories were found: "realistic training contributes to safe care", "reflection and openness motivates learning" and "finding a common understanding of team performance". Simulation-based team training makes intensive care nurses more prepared to care for severely ill patients. Team training creates a common understanding of how to work in teams with regard to patient safety. Copyright © 2014 Elsevier Ltd. All rights reserved.
Training method for enhancement of safety attitude in nuclear power plant based on crew resource management

International Nuclear Information System (INIS)

Ishibashi, Akira; Karikawa, Daisuke; Takahashi, Makoto; Wakabayashi, Toshio; Kitamura, Masaharu

2010-01-01

A conventional training program for nuclear power plant operators has been developed with emphasis on improvement of knowledge and skills of individual operators. Although it has certainly contributed to safety operation of nuclear power plants, some recent incidents have indicated the necessity of an improved training program aiming at improvement of the performance of operators working as a team. In the aviation area, crew resource management (CRM) training has shown the effect of resolving team management issues of flight crews, aircraft maintenance crews, and so on. In the present research, we attempted to introduce the CRM concept into operator training in nuclear power plants as training for conceptual skill enhancement. In this paper, a training method specially customized for nuclear power plant operators based on CRM is proposed. The proposed method has been practically utilized in the management training course of Japan Nuclear Technology Institute. The validity of the proposed method has been evaluated by means of a questionnaire survey. (author)
NS [Nuclear Safety] update. Current safety and security activities and developments taking place in the Department of Nuclear Safety and Security. Issue no. 4, June 2007

International Nuclear Information System (INIS)

2007-04-01

This newsletter contains information on the Centre for Advanced Safety Assessment Tools (CASAT), the new strategy for the recovery of radioactive sources, the Technical Support Organization Conference and a message form the Director of the Division of Nuclear Installation Safety. To improve the efficiency of safety assessment methods, ensure transparency in their validation and application and establish an excellent knowledge base and training programmes, the IAEA's Centre for Advanced Safety Assessment Tools (CASAT) has therefore been formed. The Centre addresses the need for continuous technical support mechanisms for safety assessment methods. It provides support to Member States to enhance their safety assessment capabilities for present and future generations of nuclear systems, with a special focus on countries with a developing nuclear technology and nuclear safety infrastructure. It serves as a consolidated repository of relevant safety analysis knowledge, provides for focused training including advanced analytical simulations, and supports collaboration on safety assessment projects among Member States. The resources provided through CASAT include codes, models, databases, verification and validation information, analytical procedures and guides. The main purpose of the recently established Radioactive Source Technical Coordination Group (RSTCG) is to facilitate the technical coordination of activities of the IAEA related to the control and management of radioactive sources through the development of common approaches in technical matters and to advise the management of the relevant Divisions. It is the task of the RSTCG to provide the programme managers of the participating divisions/sections with a common opinion/advice on technical issues related to the control and management of radioactive sources. The RSTCG members obtain, inter alia from programme managers, information on all relevant project proposals, and share relevant materials in due time to
High-reliability emergency response teams in the hospital: improving quality and safety using in situ simulation training.

Science.gov (United States)

Wheeler, Derek S; Geis, Gary; Mack, Elizabeth H; LeMaster, Tom; Patterson, Mary D

2013-06-01

In situ simulation training is a team-based training technique conducted on actual patient care units using equipment and resources from that unit, and involving actual members of the healthcare team. We describe our experience with in situ simulation training in a major children's medical centre. In situ simulations were conducted using standardised scenarios approximately twice per month on inpatient hospital units on a rotating basis. Simulations were scheduled so that each unit participated in at least two in situ simulations per year. Simulations were conducted on a revolving schedule alternating on the day and night shifts and were unannounced. Scenarios were preselected to maximise the educational experience, and frequently involved clinical deterioration to cardiopulmonary arrest. We performed 64 of the scheduled 112 (57%) in situ simulations on all shifts and all units over 21 months. We identified 134 latent safety threats and knowledge gaps during these in situ simulations, which we categorised as medication, equipment, and/or resource/system threats. Identification of these errors resulted in modification of systems to reduce the risk of error. In situ simulations also provided a method to reinforce teamwork behaviours, such as the use of assertive statements, role clarity, performance of frequent updating, development of a shared mental model, performance of independent double checks of high-risk medicines, and overcoming authority gradients between team members. Participants stated that the training programme was effective and did not disrupt patient care. In situ simulations can identify latent safety threats, identify knowledge gaps, and reinforce teamwork behaviours when used as part of an organisation-wide safety programme.
Quality and safety training in primary care: making an impact.

Science.gov (United States)

Byrne, John M; Hall, Susan; Baz, Sam; Kessler, Todd; Roman, Maher; Patuszynski, Mark; Thakkar, Kruti; Kashner, T Michael

2012-12-01

Preparing residents for future practice, knowledge, and skills in quality improvement and safety (QI/S) is a requisite element of graduate medical education. Despite many challenges, residency programs must consider new curricular innovations to meet the requirements. We report the effectiveness of a primary care QI/S curriculum and the role of the chief resident in quality and patient safety in facilitating it. Through the Veterans Administration Graduate Medical Education Enhancement Program, we added a position for a chief resident in quality and patient safety, and 4 full-time equivalent internal medicine residents, to develop the Primary Care Interprofessional Patient-Centered Quality Care Training Curriculum. The curriculum includes a first-or second-year, 1-month block rotation that serves as a foundational experience in QI/S and interprofessional care. The responsibilities of the chief resident in quality and patient safety included organizing and teaching the QI/S curriculum and mentoring resident projects. Evaluation included prerotation and postrotation surveys of self-assessed QI/S knowledge, abilities, skills, beliefs, and commitment (KASBC); an end-of-the-year KASBC; prerotation and postrotation knowledge test; and postrotation and faculty surveys. Comparisons of prerotation and postrotation KASBC indicated significant self-assessed improvements in 4 of 5 KASBC domains: knowledge (P < .001), ability (P < .001), skills (P < .001), and belief (P < .03), which were sustained on the end-of-the-year survey. The knowledge test demonstrated increased QI/S knowledge (P = .002). Results of the postrotation survey indicate strong satisfaction with the curriculum, with 76% (25 of 33) and 70% (23 of 33) of the residents rating the quality and safety curricula as always or usually educational. Most faculty members acknowledged that the chief resident in quality and patient safety enhanced both faculty and resident QI/S interest and
Food safety issues and training methods for ready-to-eat foods in the grocery industry.

Science.gov (United States)

Binkley, Margaret; Ghiselli, Richard

2005-10-01

As Americans have become more pressed for time, the use of convenient, simplified meals become a way of life. One aspect of this trend, known as Home Meal Replacement (IIMR), has increased in sales since its inception. Between 1999 and 2001, the average annual expenditure per consumer rose 5.6 pereent, and $958 per person per year was spent in 2002. Along with this growth, food safety risks may have increased. The study reported here examined efforts being undertaken by grocery and convenience stores to control the wholesomeness of INR food items. After a convenience sample of 500 grocery store executives was identified, a 32-item questionnaire was developed and mailed to the executives. The results indicate that the industry has taken food safety seriously with only 10 pereent reporting that they have no food safety training. The executives cited employee turnover as a major concern in food safety today, along with lack of food safety knowledge of the consumer and improper holding temperatures.

Health and safety training for hazardous waste site activities at Oak Ridge National Laboratory: Implementation of OSHA 29 CFR 1910.120(e)

International Nuclear Information System (INIS)

White, D.A.

1988-01-01

Among the requirements set forth by the interim final rule, 29 CFR Part 1910.120, promulgated by the Occupational Safety and Health Administration (OSHA) in response to the Superfund Amendments and Reauthorization Act of 1986 (SARA), are specific provisions for health and safety training of employees involved in hazardous waste operations. These training provisions require a minimum of 40 hours of initial instruction off the site for employees involved in corrective operations and cleanup activities at hazardous waste sites. A less detailed training requirement of 24 hours is specified for employees working in more routine treatment, storage, and disposal activities. Managers and supervisors who are directly responsible for or who supervise employees engaged in hazardous waste operations must complete 8 additional hours of training related to management of hazardous waste site activities. Consistent with the intent of 29 CFR 1910.120, a training program has been developed at Oak Ridge National Laboratory (ORNL) to comply with the need to protect the safety and health of hazardous waste workers. All hourly requirements specified in the interim final rule are met by a comprehensive program structure involving three stages of training. This paper will outline and discuss the content of each of these stages of the program. The involvement of various ORNL organizations in facilitating the training will be highlighted. Implementation strategies will be discussed as well as progress made to date
Establishing Sustainable Infrastructures for Education and Training in Radiation, Transport and Waste Safety: IAEA’s Approach to Support Member States

International Nuclear Information System (INIS)

Wheatley, John

2014-01-01

Summary: • IAEA General Conference has called upon MS to develop national strategies for education &training radiation, transport & waste safety; • IAEA has developed guidance, and is providing support to MSs; • IAEA Regional Training Centres are key partners with IAEA
SCALE system cross-section validation for criticality safety analysis

International Nuclear Information System (INIS)

Hathout, A.M.; Westfall, R.M.; Dodds, H.L. Jr.

1980-01-01

The purpose of this study is to test selected data from three cross-section libraries for use in the criticality safety analysis of UO 2 fuel rod lattices. The libraries, which are distributed with the SCALE system, are used to analyze potential criticality problems which could arise in the industrial fuel cycle for PWR and BWR reactors. Fuel lattice criticality problems could occur in pool storage, dry storage with accidental moderation, shearing and dissolution of irradiated elements, and in fuel transport and storage due to inadequate packing and shipping cask design. The data were tested by using the SCALE system to analyze 25 recently performed critical experiments
A 'Communication and Patient Safety' training programme for all healthcare staff: can it make a difference?

Science.gov (United States)

Lee, Peter; Allen, Kellie; Daly, Michael

2012-01-01

Communication breakdown is a factor contributing to most cases of patient harm, and this harm continues to occur at unacceptable levels. Responding to this evidence, the Metro South District of Queensland Health (Australia) has developed a communication skills training programme titled 'Communication and Patient Safety'. The three modules, each lasting 3½ h, cover both staff-to-patient and staff-to-staff communication issues, and an unusual feature is that clinical and non-clinical staff attend together. Following positive evaluation data from our initial pilot programme (involving 350 staff in a single hospital), the programme was expanded to all five hospitals in the district, and has now been completed by over 3000 staff. The results show that despite the significant time commitment, participants find the courses useful and relevant (Kirkpatrick level 1), they learn and retain new material (level 2), and they report changes in behaviour at individual, team and facility levels (level 3). Although it remains a challenge to obtain quantitative data showing that training such as this directly improves patient safety (level 4), our qualitative and informal feedback indicates that participants and their managers perceive clear improvements in the 'communication culture' after a workplace team has attended the courses. Improving 'communication for safety' in healthcare is a worldwide imperative, and other healthcare jurisdictions should be able to obtain similar results to ours if they develop and support interactive, non-didactic training in communication skills.
Self-reported patient safety competence among Canadian medical students and postgraduate trainees: a cross-sectional survey.

Science.gov (United States)

Doyle, Patricia; VanDenKerkhof, Elizabeth G; Edge, Dana S; Ginsburg, Liane; Goldstein, David H

2015-02-01

Quality and patient safety (PS) are critical components of medical education. This study reports on the self-reported PS competence of medical students and postgraduate trainees. The Health Professional Education in Patient Safety Survey was administered to medical students and postgraduate trainees in January 2012. PS dimension scores were compared across learning settings (classroom and clinical) and year in programme. Sixty-three percent (255/406) of medical students and 32% (141/436) of postgraduate trainees responded. In general, both groups were most confident in their learning of clinical safety skills (eg, hand hygiene) and least confident in learning about sociocultural aspects of safety (eg, understanding human factors). Medical students' confidence in most aspects of safety improved with years of training. For some of the more intangible dimensions (teamwork and culture), medical students in their final year had lower scores than students in earlier years. Thirty-eight percent of medical students felt they could approach someone engaging in unsafe practice, and the majority of medical students (85%) and postgraduate trainees (78%) agreed it was difficult to question authority. Our results suggest the need to improve the overall content, structure and integration of PS concepts in both classroom and clinical learning environments. Decreased confidence in sociocultural aspects of PS among medical students in the final year of training may indicate that culture in clinical settings negatively affects students' perceived PS competence. Alternatively, as medical students spend more time in the clinical setting, they may develop a clearer sense of what they do not know. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.
Training system enhancement for nuclear safety at PAKS NPP

International Nuclear Information System (INIS)

KIss, I.

2000-01-01

Paks Nuclear Power Plant is the only commercial nuclear facility in Hungary, which has been operational since 1982. The over 15 years operation of the plant can from all aspects be considered as a success, to which the well qualified, competent staff significantly contributes. Like other N-plants, Paks NPP is also exposed to major challenges due to plant ageing and changes in circumstances that affect the operation. The management focusing on maintaining nuclear safety launched an overall programme to upgrade quality of personnel training and to improve its infrastructure. Though this programme has successfully finished with visible proofs, further actions to develop a reconsidered human resource policy is needed so that the plant would successfully stand against the challenges of the 21. century. (author)
Non-linear vehicle-bridge-wind interaction model for running safety assessment of high-speed trains over a high-pier viaduct

Science.gov (United States)

Olmos, José M.; Astiz, Miguel Á.

2018-04-01

In order to properly study the high-speed traffic safety on a high-pier viaduct subject to episodes of lateral turbulent winds, an efficient dynamic interaction train-bridge-wind model has been developed and experimentally validated. This model considers the full wheel and rail profiles, the friction between these two bodies in contact, and the piers P-Delta effect. The model has been used to determine the critical train and wind velocities from which the trains cannot travel safely over the O'Eixo Bridge. The dynamic simulations carried out and the results obtained in the time domain show that traffic safety rates exceed the allowed limits for turbulent winds with mean velocities at the deck higher than 25 m/s.
Occupational Safety and Health Concerns in Logging: A Cross-Sectional Assessment in Virginia

Directory of Open Access Journals (Sweden)

Sunwook Kim

2017-11-01

Full Text Available Increased logging mechanization has helped improve logging safety and health, yet related safety risks and concerns are not well understood. A cross-sectional study was completed among Virginia loggers. Participants (n = 122 completed a self-administered questionnaire focusing on aspects of safety and health related to logging equipment. Respondents were at a high risk of workplace injuries, with reported career and 12-month injury prevalences of 51% and 14%, respectively. Further, nearly all (98% respondents reported experiencing musculoskeletal symptoms. Over half (57.4% of respondents reported symptoms related to diesel exhaust exposure in their career. Few (15.6%, however, perceived their jobs to be dangerous. Based on the opinions and suggestions of respondents, three priority areas were identified for interventions: struck-by/against hazards, situational awareness (SA during logging operations, and visibility hazards. To address these hazards, and to have a broader and more substantial positive impact on safety and health, we discuss the need for proactive approaches such as incorporating proximity technologies in a logging machine or personal equipment, and enhancing logging machine design to enhance safety, ergonomics, and SA.
C4P cross-section libraries for safety analyses with SIMMER and related studies

International Nuclear Information System (INIS)

Rineiski, A.; Sinitsa, V.; Gabrielli, F.; Maschek, W.

2011-01-01

A code and data system, C 4 P, is under development at KIT. It includes fine-group master libraries and tools for generating problem-oriented cross-section libraries, primarily for safety studies with the SIMMER code and related analyses. In the paper, the 560-group master library and problem oriented 40-group and 72-group cross-section libraries, for thermal and fast systems, respectively, are described and their performances are investigated. (author)
Current Activities on Nuclear Safety Culture in Korea. How to meet the challenges for Safety and Safety Culture?

Energy Technology Data Exchange (ETDEWEB)

Oh, Chaewoon [International Policy Department Policy and Standard Division, Korea Institute of Nuclear Safety, 19 Gusung-Dong Yuseong-Ku, 305-338 DAEJEON (Korea, Republic of)

2008-07-01

'Statement of Nuclear Safety Policy' declared by the Korean Government elucidates adherence to the principle of 'priority to safety'. The 3. Comprehensive Nuclear Energy Promotion Plan (2007-2011) more specifically addressed the necessity to develop and apply 'safety culture evaluation criteria' and to strengthen safety management of concerned organizations in an autonomous way. Putting these policies as a backdrop, Korean Government has taken diverse safety culture initiatives and has encouraged the relevant organizations to develop safety culture practices of their own accord. Accordingly, KHNP, the operating organization in Korea, developed a 'safety culture performance indicator', which has been used to evaluate safety mind of employees and the evaluation results have been continuously reflected in operational management and training programs. Furthermore, KHNP inserted 'nuclear safety culture subject' into every course of more than two week length, and provided employees with special lectures on safety culture. KINS, the regulatory organization, developed indicators for the safety culture evaluation based on the IAEA Guidelines. Also, KINS has hosted an annual Nuclear Safety Technology Information Meeting to share information between regulatory organizations and industries. Furthermore, KINS provided a nuclear safety culture class to the new employees and they are given a chance to participate in performance of a role-reversal socio-drama. Additionally, KINS developed a safety culture training program, published training materials and conducted a 'Nuclear Safety Culture Basic Course' in October 2007, 4 times of which are planed this year. In conclusion, from Government to relevant organizations, 'nuclear safety culture' concept is embraced as important and has been put into practice on a variety of forms. Specifically, 'education and training' is a starting line and sharing
Occupational safety and health training in Alaska.

Science.gov (United States)

Hild, C M

1992-01-01

We have eleven years of experience delivering a wide variety of worker education programs in cross-cultural settings to reduce the levels of occupational fatalities and injuries in Alaska. We published an instructional manual and informational poster for workers, on Alaska's "Right-To-Know" law regarding chemical and physical hazards. The "Job Hazard Recognition Program" curriculum for high school students has received national acclaim for being proactive in dealing with worker safety education before the student becomes a member of the work force. Adult educational programs and materials have been designed to include less lecture and formal presentation, and more practical "hands on" and on-the-job experience for specific trades and hazards. New industry specific manuals deal with hazardous waste reduction as a method to reduce harm to the employee. Difficulty in getting instructors and training equipment to rural locations is dealt with by becoming creative in scheduling classes, using locally available equipment, and finding regional contacts who support the overall program. Alternative approaches to funding sources include building on regional long-term plans and establishing complementary program objectives.
Safety Evakuation Of Triga-2000 Reactor Operation Viewed From Safety Culture

International Nuclear Information System (INIS)

Karliana, Itjeu

2001-01-01

The safety evaluation activities of TRIGA-2000 operation viewed from safety culture performed by questioners data collected from the operators and supervisor site of TRIGA-2000 P3TN, Bandung. There are 9 activity aspects surveyed, for instant to avail the policy of safety from their chairman, safety management, education and training, emergency aids planning, safety consultancy, accident information, safety analysis, safety devices, safety and occupational health. The surveying undertaken by filling the questioner that containing of 9 activity aspects and 20 samples of employees. The safety evaluation results' of the operation personnel in TRIGA-2000 P3TN are good implemented by both the operators and supervisors should be improve and attention need to provide the equipment's. The education and training especially for safety refreshment must be performing
49 CFR 1.73 - Delegation to the Administrator of the Federal Motor Carrier Safety Administration.

Science.gov (United States)

2010-10-01

... to remove, to the maximum extent practicable, a worst case discharge, the review and approval of... movie production sites; (9) Section 4134 relating to the grant program for persons to train operators of...; section (b)(1) relating to a review of Canadian and Mexican compliance with Federal motor vehicles safety...
The application of MVC design pattern in Daya bay reactor neutrino experiments online safety training system

International Nuclear Information System (INIS)

Liu Guanchuan; Chu Yuanping

2011-01-01

The article made an introduction to MVC, which is an architectural pattern used in software engineering. It specified the advantages and disadvantages of MVC and also the application of MVC in Daya Bay nuclear reactor neutrino experiment online safety training system. (authors)
20 CFR 645.260 - What health and safety provisions apply to participants in Welfare-to-Work programs?

Science.gov (United States)

2010-04-01

... Administrative Requirements § 645.260 What health and safety provisions apply to participants in Welfare-to-Work... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false What health and safety provisions apply to participants in Welfare-to-Work programs? 645.260 Section 645.260 Employees' Benefits EMPLOYMENT AND TRAINING...
Training Presentation for NASA Civil Helicopter Safety Website

Science.gov (United States)

Iseler, Laura

2002-01-01

NASA civil helicopter safety News & Updates include the following: Mar. 2002. The Air Medical Operations Survey has been completed! Check it out! Also accessible via the Mission pages under Air Medical Mission. Air Medical and Law Enforcement Mission pages have been added. They are accessible via the Mission pages. The Public Use, Personal, Offshore, Law Enforcement, External Load, Business and Gyro accident pages (accessable via the Mission page) have been updated. Feb. 2002. A Words of Wisdom section has been added. You can access it by clicking the Library button. A link to a Corporate Accident Response Plan has been added to the Accident page. The AMs, Aerial Application and Instruction accident pages (accessable via the Mission page) have been updated. Jan. 2002. A new searchable safety article database has been added. You can access it by clicking the Library button. The 2001 accident summaries have been updated and the statistics have been compiled - check it out by clicking the accident tab to the left. Dec. 2001. Please read the FAA Administrator's memo regarding the latest FBI warning. 3ee the FAA column - Fall 2001 Read it now!
A comparison of food safety knowledge among restaurant managers, by source of training and experience, in Oklahoma County, Oklahoma.

Science.gov (United States)

Lynch, Robert A; Elledge, Brenda L; Griffith, Charles C; Boatright, Daniel T

2003-09-01

The annual incidence of illness related to food consumption continues to present a challenge to environmental health management. A significant fraction of cases have been attributed to consumption of food in restaurants, and as the number of meals eaten away from the home continues to rise, the potential for large-scale foodborne-disease outbreaks will continue to increase. Food handlers in retail establishments contribute to the incidence of foodborne disease; therefore, it is essential that workers and management staff have a thorough understanding of safe food practices. Since the training, certification, and experience of food service managers vary greatly, it is also likely that managers' knowledge base may differ. In the study reported here, restaurant managers were administered a survey designed to measure their understanding of basic food safety principles. The sources of training, certification, and experience were found to significantly affect the level of food safety knowledge; however, increased hours of training did not increase knowledge. In addition, the time lapsed since training did not significantly affect the level of knowledge.
Changes in patient safety culture after restructuring of intensive care units: Two cross-sectional studies.

Science.gov (United States)

Vifladt, Anne; Simonsen, Bjoerg O; Lydersen, Stian; Farup, Per G

2016-02-01

Compare changes in registered nurses' perception of the patient safety culture in restructured and not restructured intensive care units during a four-year period. Two cross-sectional surveys were performed, in 2008/2009 (time 1) and 2012/2013 (time 2). During a period of 0-3 years after time 1, three of six hospitals merged their general and medical intensive care units (restructured). The other hospitals maintained their structure of the intensive care units (not restructured). Intensive care units in hospitals at one Norwegian hospital trust. The safety culture was measured with Hospital Survey on Patient Safety Culture. At times 1 and 2, 217/302 (72%) and 145/289 (50%) registered nurses participated. Restructuring was negatively associated with change in the safety culture, in particular, the dimensions of the safety culture within the unit level. The dimensions most vulnerable for restructuring were manager expectations and actions promoting safety, teamwork within hospital units and staffing. In this study, the restructuring of intensive care units was associated with a negative impact on the safety culture. When restructuring, the management should be particularly aware of changes in the safety culture dimensions manager expectations and actions promoting safety, teamwork within hospital units and staffing. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.
Occupational Health and Safety. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Gadd, Nick; Lucas, Michele

This publication contains the three communication skills units of the three levels of Support Materials for Agricultural Training (SMAT) in the area of occupational health and safety: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her written and spoken communication skills needed…
Guide to good practice in radiation protection training

International Nuclear Information System (INIS)

Johnson, N.; Schenley, C.; Smith, A.; Weseman, M.

1988-10-01

This set of guidelines applies to radiation protection training programs for all Department of Energy (DOE) contractors, subcontractors, and visitors to DOE contractor facilities. It is to be used as a self-evaluation tool by DOE contractors as they develop and evaluate their training programs. This document is based on good practice guidelines used by a variety of different facilities both within and outside of the DOE contractor system. Good practices are not requirements; they are guidelines that contractors should use as they develop and conduct training programs. The applicability of the contents of the Guide to Good Practice in Radiation Protection Training depends upon each DOE facility's scope and need for radiation safety training. Although the focus of this document is radiation protection training, it is important that the process by which training is developed and implemented be discussed. Therefore, the first section presents guidelines for performance-based training and ideas to be considered regarding the structure and documentation of the training function

Public perception of drinking water safety in South Africa 2002–2009: a repeated cross-sectional study

Science.gov (United States)

2012-01-01

Background In low and middle income countries, public perceptions of drinking water safety are relevant to promotion of household water treatment and to household choices over drinking water sources. However, most studies of this topic have been cross-sectional and not considered temporal variation in drinking water safety perceptions. The objective of this study is to explore trends in perceived drinking water safety in South Africa and its association with disease outbreaks, water supply and household characteristics. Methods This repeated cross-sectional study draws on General Household Surveys from 2002–2009, a series of annual nationally representative surveys of South African households, which include a question about perceived drinking water safety. Trends in responses to this question were examined from 2002–2009 in relation to reported cholera cases. The relationship between perceived drinking water safety and organoleptic qualities of drinking water, supply characteristics, and socio-economic and demographic household characteristics was explored in 2002 and 2008 using hierarchical stepwise logistic regression. Results The results suggest that perceived drinking water safety has remained relatively stable over time in South Africa, once the expansion of improved supplies is controlled for. A large cholera outbreak in 2000–02 had no apparent effect on public perception of drinking water safety in 2002. Perceived drinking water safety is primarily related to water taste, odour, and clarity rather than socio-economic or demographic characteristics. Conclusion This suggests that household perceptions of drinking water safety in South Africa follow similar patterns to those observed in studies in developed countries. The stability over time in public perception of drinking water safety is particularly surprising, given the large cholera outbreak that took place at the start of this period. PMID:22834485
Public perception of drinking water safety in South Africa 2002–2009: a repeated cross-sectional study

Directory of Open Access Journals (Sweden)

Wright Jim A

2012-07-01

Full Text Available Abstract Background In low and middle income countries, public perceptions of drinking water safety are relevant to promotion of household water treatment and to household choices over drinking water sources. However, most studies of this topic have been cross-sectional and not considered temporal variation in drinking water safety perceptions. The objective of this study is to explore trends in perceived drinking water safety in South Africa and its association with disease outbreaks, water supply and household characteristics. Methods This repeated cross-sectional study draws on General Household Surveys from 2002–2009, a series of annual nationally representative surveys of South African households, which include a question about perceived drinking water safety. Trends in responses to this question were examined from 2002–2009 in relation to reported cholera cases. The relationship between perceived drinking water safety and organoleptic qualities of drinking water, supply characteristics, and socio-economic and demographic household characteristics was explored in 2002 and 2008 using hierarchical stepwise logistic regression. Results The results suggest that perceived drinking water safety has remained relatively stable over time in South Africa, once the expansion of improved supplies is controlled for. A large cholera outbreak in 2000–02 had no apparent effect on public perception of drinking water safety in 2002. Perceived drinking water safety is primarily related to water taste, odour, and clarity rather than socio-economic or demographic characteristics. Conclusion This suggests that household perceptions of drinking water safety in South Africa follow similar patterns to those observed in studies in developed countries. The stability over time in public perception of drinking water safety is particularly surprising, given the large cholera outbreak that took place at the start of this period.
Safety training

CERN Multimedia

SC Unit

2009-01-01

Habilitation électrique A course entitled "Habilitation électrique pour personnel de laboratoire" (electrical safety qualification for laboratory personnel) will be held on 22 and 23 June. Registration by e-mail to isabelle.cusato@cern.ch. Explosion Hazards in the handling of flammable solvents and gases A course entitled "Explosion Hazards in the handling of flammable solvents and gases" given in French will be held on 18-19 June 2009. This course is obligatory for all FGSOs at CERN, and it is recommended for anyone handling flammable gas or solvents. To sign up please visit this page. For more information please contact Isabelle Cusato, tel. 73811.
30 CFR 46.3 - Training plans.

Science.gov (United States)

2010-07-01

... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR EDUCATION AND TRAINING TRAINING AND..., National Mine Health and Safety Academy, 1301 Airport Road, Beaver, WV 25813-9426, Telephone: (304) 256... responsible for the health and safety training at the mine. This person may be the production-operator or...
Evaluating the effectiveness of a peer-led education intervention to improve the patient safety attitudes of junior pharmacy students: a cross-sectional study using a latent growth curve modelling approach.

Science.gov (United States)

Walpola, Ramesh L; Fois, Romano A; McLachlan, Andrew J; Chen, Timothy F

2015-12-08

Despite the recognition that educating healthcare students in patient safety is essential, changing already full curricula can be challenging. Furthermore, institutions may lack the capacity and capability to deliver patient safety education, particularly from the start of professional practice studies. Using senior students as peer educators to deliver practice-based education can potentially overcome some of the contextual barriers in training junior students. Therefore, this study aimed to evaluate the effectiveness of a peer-led patient safety education programme for junior pharmacy students. A repeat cross-sectional design utilising a previously validated patient safety attitudinal survey was used to evaluate attitudes prior to, immediately after and 1 month after the delivery of a patient safety education programme. Latent growth curve (LGC) modelling was used to evaluate the change in attitudes of first-year students using second-year students as a comparator group. Undergraduate university students in Sydney, Australia. 175 first-year and 140 second-year students enrolled in the Bachelor of Pharmacy programme at the University of Sydney. An introductory patient safety programme was implemented into the first-year Bachelor of Pharmacy curriculum at the University of Sydney. The programme covered introductory patient safety topics including teamwork, communication skills, systems thinking and open disclosure. The programme consisted of 2 lectures, delivered by a senior academic, and a workshop delivered by trained final-year pharmacy students. A full LGC model was constructed including the intervention as a non-time-dependent predictor of change (χ(2) (51)=164.070, root mean square error of approximation=0.084, comparative fit index=0.913, standardised root mean square=0.056). First-year students' attitudes significantly improved as a result of the intervention, particularly in relation to internalising errors (p=0.010), questioning behaviours (pmethod that
Criticality Safety Evaluation for the TACS at DAF

Energy Technology Data Exchange (ETDEWEB)

Percher, C. M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Heinrichs, D. P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2011-06-10

Hands-on experimental training in the physical behavior of multiplying systems is one of ten key areas of training required for practitioners to become qualified in the discipline of criticality safety as identified in DOE-STD-1135-99, Guidance for Nuclear Criticality Safety Engineer Training and Qualification. This document is a criticality safety evaluation of the training activities and operations associated with HS-3201-P, Nuclear Criticality 4-Day Training Course (Practical). This course was designed to also address the training needs of nuclear criticality safety professionals under the auspices of the NNSA Nuclear Criticality Safety Program1. The hands-on, or laboratory, portion of the course will utilize the Training Assembly for Criticality Safety (TACS) and will be conducted in the Device Assembly Facility (DAF) at the Nevada Nuclear Security Site (NNSS). The training activities will be conducted by Lawrence Livermore National Laboratory following the requirements of an Integrated Work Sheet (IWS) and associated Safety Plan. Students will be allowed to handle the fissile material under the supervision of an LLNL Certified Fissile Material Handler.
Increasing patient safety with neonates via handoff communication during delivery: a call for interprofessional health care team training across GME and CME.

Science.gov (United States)

Vanderbilt, Allison A; Pappada, Scott M; Stein, Howard; Harper, David; Papadimos, Thomas J

2017-01-01

Hospitals have struggled for years regarding the handoff process of communicating patient information from one health care professional to another. Ineffective handoff communication is recognized as a serious patient safety risk within the health care community. It is essential to take communication into consideration when examining the safety of neonates who require immediate medical attention after birth; effective communication is vital for positive patient outcomes, especially with neonates in a delivery room setting. Teamwork and effective communication across the health care continuum are essential for providing efficient, quality care that leads to favorable patient outcomes. Interprofessional simulation and team training can benefit health care professionals by improving interprofessional competence, defined as one's knowledge of other professionals including an understanding of their training and skillsets, and role clarity. Interprofessional teams that include members with specialization in obstetrics, gynecology, and neonatology have the potential to considerably benefit from training effective handoff and communication practices that would ensure the safety of the neonate upon birth. We must strive to provide the most comprehensive systematic, standardized, interprofessional handoff communication training sessions for such teams, through Graduate Medical Education and Continuing Medical Education that will meet the needs across the educational continuum.
Promoting safety mindfulness: Recommendations for the design and use of simulation-based training in radiation therapy

Directory of Open Access Journals (Sweden)

Lukasz M. Mazur, PhD

2018-04-01

Full Text Available There is a need to better prepare radiation therapy (RT providers to safely operate within the health information technology (IT sociotechnical system. Simulation-based training has been preemptively used to yield meaningful improvements during providers' interactions with health IT, including RT settings. Therefore, on the basis of the available literature and our experience, we propose principles for the effective design and use of simulated scenarios and describe a conceptual framework for a debriefing approach to foster successful training that is focused on safety mindfulness during RT professionals' interactions with health IT.
38 CFR 21.4265 - Practical training approved as institutional training or on-job training.

Science.gov (United States)

2010-07-01

... approved as institutional training or on-job training. 21.4265 Section 21.4265 Pensions, Bonuses, and... training or on-job training. (a) Medical-dental internships and residencies. (1) Medical residencies (other...) of this section. If the course is not so accredited such practical or on-the-job training or...
20 CFR 641.600 - What is the purpose of the private sector training projects authorized under section 502(e) of...

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false What is the purpose of the private sector... EMPLOYMENT PROGRAM Private Sector Training Projects Under Section 502(e) of the OAA § 641.600 What is the purpose of the private sector training projects authorized under section 502(e) of the OAA? The purpose of...
Dynamic training devices in CRM training

Science.gov (United States)

Lawver, J.

1984-01-01

Pilot training effectiveness and flying safety of a seasonal tour flight company are described. The change from single pilot to two pilot operated twin otters is examined. The use of the ATC 810 training device, its possibilities and training capacity is outlined. Problem areas which may arise, emergency system and pilot/passenger interaction are analyzed.
MO-DE-BRA-04: Hands-On Fluoroscopy Safety Training with Real-Time Patient and Staff Dosimetry

International Nuclear Information System (INIS)

Vanderhoek, M; Bevins, N

2016-01-01

Purpose: Fluoroscopically guided interventions (FGI) are routinely performed across many different hospital departments. However, many involved staff members have minimal training regarding safe and optimal use of fluoroscopy systems. We developed and taught a hands-on fluoroscopy safety class incorporating real-time patient and staff dosimetry in order to promote safer and more optimal use of fluoroscopy during FGI. Methods: The hands-on fluoroscopy safety class is taught in an FGI suite, unique to each department. A patient equivalent phantom is set on the patient table with an ion chamber positioned at the x-ray beam entrance to the phantom. This provides a surrogate measure of patient entrance dose. Multiple solid state dosimeters (RaySafe i2 dosimetry systemTM) are deployed at different distances from the phantom (0.1, 1, 3 meters), which provide surrogate measures of staff dose. Instructors direct participating clinical staff to operate the fluoroscopy system as they view live fluoroscopic images, patient entrance dose, and staff doses in real-time. During class, instructors work with clinical staff to investigate how patient entrance dose, staff doses, and image quality are affected by different parameters, including pulse rate, magnification, collimation, beam angulation, imaging mode, system geometry, distance, and shielding. Results: Real-time dose visualization enables clinical staff to directly see and learn how to optimize their use of their own fluoroscopy system to minimize patient and staff dose, yet maintain sufficient image quality for FGI. As a direct result of the class, multiple hospital departments have implemented changes to their imaging protocols, including reduction of the default fluoroscopy pulse rate and increased use of collimation and lower dose fluoroscopy modes. Conclusion: Hands-on fluoroscopy safety training substantially benefits from real-time patient and staff dosimetry incorporated into the class. Real-time dose display helps
MO-DE-BRA-04: Hands-On Fluoroscopy Safety Training with Real-Time Patient and Staff Dosimetry

Energy Technology Data Exchange (ETDEWEB)

Vanderhoek, M; Bevins, N [Henry Ford Health System, Detroit, MI (United States)

2016-06-15

Purpose: Fluoroscopically guided interventions (FGI) are routinely performed across many different hospital departments. However, many involved staff members have minimal training regarding safe and optimal use of fluoroscopy systems. We developed and taught a hands-on fluoroscopy safety class incorporating real-time patient and staff dosimetry in order to promote safer and more optimal use of fluoroscopy during FGI. Methods: The hands-on fluoroscopy safety class is taught in an FGI suite, unique to each department. A patient equivalent phantom is set on the patient table with an ion chamber positioned at the x-ray beam entrance to the phantom. This provides a surrogate measure of patient entrance dose. Multiple solid state dosimeters (RaySafe i2 dosimetry systemTM) are deployed at different distances from the phantom (0.1, 1, 3 meters), which provide surrogate measures of staff dose. Instructors direct participating clinical staff to operate the fluoroscopy system as they view live fluoroscopic images, patient entrance dose, and staff doses in real-time. During class, instructors work with clinical staff to investigate how patient entrance dose, staff doses, and image quality are affected by different parameters, including pulse rate, magnification, collimation, beam angulation, imaging mode, system geometry, distance, and shielding. Results: Real-time dose visualization enables clinical staff to directly see and learn how to optimize their use of their own fluoroscopy system to minimize patient and staff dose, yet maintain sufficient image quality for FGI. As a direct result of the class, multiple hospital departments have implemented changes to their imaging protocols, including reduction of the default fluoroscopy pulse rate and increased use of collimation and lower dose fluoroscopy modes. Conclusion: Hands-on fluoroscopy safety training substantially benefits from real-time patient and staff dosimetry incorporated into the class. Real-time dose display helps
Neonatal Safety of Elective Family-Centered Caesarean Sections: A Cohort Study

Directory of Open Access Journals (Sweden)

Ilona C. Narayen

2018-02-01

Full Text Available BackgroundAlthough little data are available concerning safety for newborns, family-centered caesarean sections (FCS are increasingly implemented. With FCS mothers can see the delivery of their baby, followed by direct skin-to-skin contact. We evaluated the safety for newborns born with FCS in the Leiden University Medical Center (LUMC, where FCS was implemented in June 2014 for singleton pregnancies with a gestational age (GA ≥38 weeks and without increased risks for respiratory morbidity.MethodsThe incidence of respiratory pathology, unplanned admission, and hypothermia in infants born after FCS in LUMC were retrospectively reviewed and compared with a historical cohort of standard elective cesarean sections (CS.ResultsFrom June 2014 to November 2015, 92 FCS were performed and compared to 71 standard CS in 2013. Incidence of respiratory morbidity, hypothermia, temperatures at arrival at the department, GA, and birth weight were comparable (ns. Unplanned admission occurred more often after FCS when compared to standard CS (21 vs 7%; p = 0.03, probably due to peripheral oxygen saturation (SpO2 monitoring. There was no increase in respiratory pathology (8 vs 6%, ns. One-third of the babies were separated from their mother during or after FCS.ConclusionUnplanned neonatal admissions after elective CS increased after implementing FCS, without an increase in respiratory morbidity or hypothermia. SpO2 monitoring might have a contribution. Separation from the mother occurred often.
Chapter 5: Training

Energy Technology Data Exchange (ETDEWEB)

NONE

2018-04-01

The chapter 5 presents the 1) initial training; 2) periodic training, which includes: a) periodic training for employees at lower levels of the hierarchy than that of the operator; b) period training for operators; 3) operator training; 4) record of training; 5) safety culture.
Cockpit Resource Management (CRM): A tool for improved flight safety (United Airlines CRM training)

Science.gov (United States)

Carroll, J. E.; Taggart, William R.

1987-01-01

The approach and methodology used in developing cockpit management skills is effective because of the following features: (1) A comparative method of learning is used enabling crewmembers to study different forms of teamwork. (2) The learning comes about as a result of crewmembers learning from one another instead of from an expert instructor. (3) Key elements of cockpit teamwork and effective management are studied so that crewmembers can determine how these elements can improve safety and problem solving. (4) Critique among the crewmembers themselves rather than from outsiders is used as a common focusing point for crews to provide feedback to one another on how each can be a more effective crewmember. (5) The training is continuous in the sense that it becomes part of recurrent, upgrade, and other forms of crewmember training and development. And (6) the training results in sound and genuine insights that come about through solid education as opposed to tutoring, coaching, or telling crewmembers how to behave more effectively.
78 FR 42452 - Safety Zone; Kentucky Air National Guard Vessel for Parachute Rescue Jumpmaster Training, Lake...

Science.gov (United States)

2013-07-16

... only a few hours at a time during any 24 hour period. The majority of the training exercises will be... greatly reducing the likelihood of affecting transient recreational vessels. Additionally, the starting... Health Risks and Safety Risks. This rule is not an economically significant rule and does not create an...
Safety management procedures and practices at Indira Gandhi Centre for Atomic Research

Energy Technology Data Exchange (ETDEWEB)

Rodriguez, P.; Lee, S.M.; Kapoor, R.P.; Raghunath, V.M.; Karthikeyan, S.V. [Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102 (India)]. E-mail: kapoor@igcar.ernet.in

2004-07-01

The Indira Gandhi Centre for Atomic Research (IGCAR) operates FBTR (Fast Breeder Test Reactor), KAMINI (neutron source reactor), radiometallurgical laboratory, radiochemical laboratory, reprocessing plant, industrial scale sodium loops, advanced research laboratories, workshops, etc. Codified safety management procedures with systematic surveillance are essential for safe and reliable operations and these are described under the classifications of radiation safety, industrial safety and reactor operations with special emphasis on the human factor. Health physics teams, independent of the plant facility, supervise the radioactive facilities of the centre. Industrial safety standards are maintained by another independent section. Safety management for the reactors include a clear organisational structure, adequate documentation, compulsory training and licencing, safe working methods taking into account human factors and review by independent safety authorities. (author)
Safety management procedures and practices at Indira Gandhi Centre for Atomic Research

International Nuclear Information System (INIS)

Rodriguez, P.; Lee, S.M.; Kapoor, R.P.; Raghunath, V.M.; Karthikeyan, S.V.

2004-01-01

The Indira Gandhi Centre for Atomic Research (IGCAR) operates FBTR (Fast Breeder Test Reactor), KAMINI (neutron source reactor), radiometallurgical laboratory, radiochemical laboratory, reprocessing plant, industrial scale sodium loops, advanced research laboratories, workshops, etc. Codified safety management procedures with systematic surveillance are essential for safe and reliable operations and these are described under the classifications of radiation safety, industrial safety and reactor operations with special emphasis on the human factor. Health physics teams, independent of the plant facility, supervise the radioactive facilities of the centre. Industrial safety standards are maintained by another independent section. Safety management for the reactors include a clear organisational structure, adequate documentation, compulsory training and licencing, safe working methods taking into account human factors and review by independent safety authorities. (author)
Exploring the relationship between quality of management and safety climate in a large scale Danish cross‐sectional study

DEFF Research Database (Denmark)

Sønderstrup-Andersen, Hans H. K.; Carlsen, Kathrine; Kines, Pete

2011-01-01

. In addition, we consider the impact of age, gender, education, job type and seniority as well as company size and industrial sector on the rating of safety climate. Predictors of safety climate ratings are analysed by use of multiple regression analysis. Our results show that the leadership style measured...... and transformational leadership and safety climate, and to explore how safety climate is affected by a number of socio-demographic factors and within different industries and company sizes. The analyses are based on data from a recent Danish work environment cross-sectional study including 3681 employees from a wide...... range of industries and who report that safety climate is relevant for their job. We use two safety climate items, (one regarding management safety empowerment; one regarding co-workers’ safety priority), one question about transactional leadership and two scales concerning transformational leadership...

Safety verification for the ECCS driven by the electrically 4 trains during LBLOCA reflood phase using ATLAS

International Nuclear Information System (INIS)

Park, Yusun; Park, Hyun-sik; Kang, Kyoung-ho; Choi, Nam-hyun; Min, Kyoung-ho; Choi, Ki-yong

2014-01-01

Highlights: • Safety improvement by adopting 4 train emergency core cooling system was validated experimentally. • General thermal hydraulic behaviors of the system during LBLOCA reflood phase were successfully demonstrated. • Key parameters such as the liquid levels, the PCTs, the quenching time, and the ECC bypass ratios were investigated. • Asymmetric effects of the different combination of safety injection were negligible during the reflood period. - Abstract: The APR1400 is equipped with four safety injection pumps driven by two emergency diesel generators. However, the design has been changed so that the four safety injection pumps are driven by 4 emergency diesel generators during the design certification process from the U.S. NRC. Thus, 4 safety injection pumps (SIPs) are completely independent electrically and mechanically and three safety injection pumps are available in a single failure condition. This design change could have a certain effects on the thermal-hydraulic phenomenon occurring in the downcomer region during the late reflood phase of a large break loss of coolant accident (LBLOCA). Thus, in this study, a verification experiment for the reflood phase of a LBLOCA was performed to evaluate the core cooling performance of the 4 train emergency core cooling system (ECCS) with an assumption of a single failure. And the different combinations of three SIPs positions were tested to investigate the asymmetric effects on the reactor core cooling performance. The overall experimental results revealed the typical thermal–hydraulic trends expected to occur during the reflood phase of a large-break LOCA scenario for the APR1400. Experiment with the injection of three SIPs showed a faster core quenching time and lower bypass ratio than that of the case in which two SIPs were injected. The RPV wall temperature distributions showed the similar trend in spite of the different SIP combinations
[Safety culture in orthopedics and trauma surgery : Course concept: interpersonal competence by the German Society for Orthopaedics and Trauma (DGOU) and Lufthansa Aviation Training].

Science.gov (United States)

Doepfer, A-K; Seemann, R; Merschin, D; Stange, R; Egerth, M; Münzberg, M; Mutschler, M; Bouillon, B; Hoffmann, R

2017-10-01

Patient safety has become a central and measurable key factor in the routine daily medical practice. The human factor plays a decisive role in safety culture and has moved into focus regarding the reduction of treatment errors and undesired critical incidents. Nonetheless, the systematic training in communication and interpersonal competences has so far only played a minor role. The German Society of Orthopaedics and Trauma (DGOU) in cooperation with the Lufthansa Aviation Training initiated a course system for interpersonal competence. Several studies confirmed the reduction of critical incidents and costs after implementation of a regular and targeted human factor training. The interpersonal competence should be an essential component of specialist training within the framework of a 3‑column model.
The Impact of Patient Safety Training on Oral and Maxillofacial Surgery Residents' Attitudes and Knowledge: A Mixed Method Case Study

Science.gov (United States)

Buhrow, Suzanne

2013-01-01

It is estimated that in the United States, more than 40,000 patients are injured each day because of preventable medical errors. Patient safety experts and graduate medical education accreditation leaders recognize that medical education reform must include the integration of safety training focused on error causation, system engineering, and…
Introduction to the Special Section on Teaching, Training, and Supervision in Personality and Psychological Assessment.

Science.gov (United States)

Smith, Justin D

2017-01-01

This special section contains empirical and conceptual articles pertaining to the broad topic of teaching, training, and supervision of assessment. Despite some evidence of a decline in recent decades, assessment remains a defining practice of professional psychologists in many subfields, including clinical, counseling, school, and neuropsychology, that consumes a consequential proportion of their time. To restore assessment to its rightful place of prominence, a clear agenda needs to be developed for advancing teaching and training methods, increasing instruction to state-of-the-art methods, and defining aims that could be elucidated through empirical inquiry. The 7 articles in this special section provide a developmental perspective of these issues that collectively provide practical tools for instructors and begin to set the stage for a research agenda in this somewhat neglected area of study that is vital to the identity of professional psychology. Additionally, 2 comments are provided by distinguished figures in the field concerning the implications of the articles in the special section to health services psychology and the competencies-based movement in applied psychology.
New Radiation Protection training room

CERN Multimedia

HSE Unit

2013-01-01

From now on, the theory and practical components of the Radiation Protection training, developed by the RP Group and offered by the HSE Unit’s Safety Training team to people working in a Controlled Radiation Area, will take place in a dedicated teaching room, designed specifically for this kind of training. The new room is in the Safety Training Centre on the Prévessin site and has been open since 16 October. It has an adjoining workshop that, like the room itself, can accommodate up to 12 people. It is also equipped with an interactive board as well as instruments and detectors to test for ionising radiation. This room is located near the recently inaugurated LHC tunnel mock-up where practical training exercises can be carried out in conditions almost identical to those in the real tunnel. To consult the safety training catalogue and/or sign up for Radiation Protection training, please go to: https://cta.cern.ch For further information, please contact the Safety Trainin...
Nuclear safety culture and nuclear safety supervision

International Nuclear Information System (INIS)

Chai Jianshe

2013-01-01

In this paper, the author reviews systematically and summarizes up the development process and stage characteristics of nuclear safety culture, analysis the connotation and characteristics of nuclear safety culture, sums up the achievements of our country's nuclear safety supervision, dissects the challenges and problems of nuclear safety supervision. This thesis focused on the relationship between nuclear safety culture and nuclear safety supervision, they are essential differences, but there is a close relationship. Nuclear safety supervision needs to introduce some concepts of nuclear safety culture, lays emphasis on humanistic care and improves its level and efficiency. Nuclear safety supervision authorities must strengthen nuclear safety culture training, conduct the development of nuclear safety culture, make sure that nuclear safety culture can play significant roles. (author)
Using Simulations to Improve Electronic Health Record Use, Clinician Training and Patient Safety: Recommendations From A Consensus Conference

OpenAIRE

Mohan, Vishnu; Woodcock, Deborah; McGrath, Karess; Scholl, Gretchen; Pranaat, Robert; Doberne, Julie W.; Chase, Dian A.; Gold, Jeffrey A.; Ash, Joan S.

2017-01-01

A group of informatics experts in simulation, biomedical informatics, patient safety, medical education, and human factors gathered at Corbett, Oregon on April 30 and May 1, 2015. Their objective: to create a consensus statement on best practices for the use of electronic health record (EHR) simulations in education and training, to improve patient safety, and to outline a strategy for future EHR simulation work. A qualitative approach was utilized to analyze data from the conference and gene...
Australian cardiac rehabilitation exercise parameter characteristics and perceptions of high-intensity interval training: a cross-sectional survey

Science.gov (United States)

Hannan, Amanda L; Hing, Wayne; Climstein, Mike; Coombes, Jeff S; Furness, James; Jayasinghe, Rohan; Byrnes, Joshua

2018-01-01

Purpose This study explored current demographics, characteristics, costs, evaluation methods, and outcome measures used in Australian cardiac rehabilitation (CR) programs. It also determined the actual usage and perceptions of high-intensity interval training (HIIT). Methods A cross-sectional observational web-based survey was distributed to 328 Australian CR programs nationally. Results A total of 261 programs completed the survey (79.6% response rate). Most Australian CR programs were located in a hospital setting (76%), offered exercise sessions once a week (52%) for 6–8 weeks (49%) at moderate intensity (54%) for 46–60 min (62%), and serviced 101–500 clients per annum (38%). HIIT was reported in only 1% of programs, and 27% of respondents believed that it was safe while 42% of respondents were unsure. Lack of staff (25%), monitoring resources (20%), and staff knowledge (18%) were the most commonly reported barriers to the implementation of HIIT. Overall, Australian CR coordinators are unsure of the cost of exercise sessions. Conclusion There is variability in CR delivery across Australia. Only half of programs reassess outcome measures postintervention, and cost of exercise sessions is unknown. Although HIIT is recommended in international CR guidelines, it is essentially not being used in Australia and clinicians are unsure as to the safety of HIIT. Lack of resources and staff knowledge were perceived as the biggest barriers to HIIT implementation, and there are inconsistent perceptions of prescreening and monitoring requirements. This study highlights the need to educate health professionals about the benefits and safety of HIIT to improve its usage and patient outcomes. PMID:29750058
The role of probabilistic safety assessment and probabilistic safety criteria in nuclear power plant safety

International Nuclear Information System (INIS)

1992-01-01

The purpose of this Safety Report is to provide guidelines on the role of probabilistic safety assessment (PSA) and a range of associated reference points, collectively referred to as probabilistic safety criteria (PSC), in nuclear safety. The application of this Safety Report and the supporting Safety Practice publication should help to ensure that PSA methodology is used appropriately to assess and enhance the safety of nuclear power plants. The guidelines are intended for use by nuclear power plant designers, operators and regulators. While these guidelines have been prepared with nuclear power plants in mind, the principles involved have wide application to other nuclear and non-nuclear facilities. In Section 2 of this Safety Report guidelines are established on the role PSA can play as part of an overall safety assurance programme. Section 3 summarizes guidelines for the conduct of PSAs, and in Section 4 a PSC framework is recommended and guidance is provided for the establishment of PSC values
Integrated surgical academic training in the UK: a cross-sectional survey.

Science.gov (United States)

Blencowe, Natalie S; Glasbey, James C; McElnay, Philip J; Bhangu, Aneel; Gokani, Vimal J; Harries, Rhiannon L

2017-10-01

This study aimed to explore variations in the provision of integrated academic surgical training across the UK. This is an online cross-sectional survey (consisting of 44 items with a range of free-text, binomial and 5-point Likert scale responses) developed by the Association of Surgeons in Training. A self-reported survey instrument was distributed to academic surgical trainees across the UK (n=276). 143 (51.9%) responses were received (81% male, median age: 34 years), spanning all UK regions and surgical specialties. Of the 143 trainees, 29 were core trainees (20.3%), 99 were specialty trainees (69.2%) and 15 (10.5%) described themselves as research fellows. The structure of academic training varied considerably, with under a third of trainees receiving guaranteed protected time for research. Despite this, however, 53.1% of the respondents reported to be satisfied with how their academic training was organised. Covering clinical duties during academic time occurred commonly (72.7%). Although most trainees (n=88, 61.5%) met with their academic supervisor at least once a month, six (4.2%) never had an academic supervisory meeting. Most trainees (n=90, 62.9%) occupied a full-time rota slot and only 9.1% (n=13) described their role as 'supernumerary'. Although 58.7% (n=84) of the trainees were satisfied with their clinical competence, 37.8% (n=54) felt that clinical time focused more on service provision than the acquisition of technical skills. 58 (40.6%) had experienced some form of negative sentiment relating to their status as an academic trainee. Integrated academic training presents unique challenges and opportunities within surgery. This survey has identified variation in the quality of current programmes, meaning that the future provision of integrated surgical academic training should be carefully considered. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is
The official website of the U.S. department of energy's nuclear criticality safety program

Energy Technology Data Exchange (ETDEWEB)

Koponen, B.; Heinrichs, D.; Lee, C. [Lawrence Livermore National Laboratory, CA (United States); Scott, L. [SAIC, Solana Beach, CA (United States)

2014-07-01

The U.S. Department of Energy (DOE) Nuclear Criticality Safety Program (NCSP) mission is to provide sustainable expert leadership, direction, and the technical infrastructure necessary to develop, maintain, and disseminate the essential technical tools, training, and data to support safe, efficient fissionable material operations within the DOE. The NCSP Website site makes a variety of information available to the criticality safety practitioner, including reference materials, training modules and links to related sites. It assists criticality safety personnel to keep abreast of NCSP activities or current developments in criticality safety via a 'What's New' section within the Website. Convenient access to the many useful features of the Website is available via drop-down menus. The Website is also available to non-DOE and international professionals tasked with ensuring safe operations involving fissionable nuclear materials. (author)
Virtual reality for mine safety training.

Science.gov (United States)

Filigenzi, M T; Orr, T J; Ruff, T M

2000-06-01

Mining has long remained one of America's most hazardous occupations. Researchers believe that by developing realistic, affordable VR training software, miners will be able to receive accurate training in hazard recognition and avoidance. In addition, the VR software will allow miners to follow mine evacuation routes and safe procedures without exposing themselves to danger. This VR software may ultimately be tailored to provide training in other industries, such as the construction, agricultural, and petroleum industries.
Investigating workload and its relationship with fatigue among train drivers in Keshesh section of Iranian Railway Company

Directory of Open Access Journals (Sweden)

2012-12-01

Full Text Available Introduction: Train driving is a high responsibility job in railway industry. Train drivers need different cognitive functions such as vigilance, object detection, memory, planning, decision-making. High level of fatigue is one of the caused factor of accidents among train drivers. Numerous factors can impact train drivers’ fatigue but high level of workload is a key factor. Therefore, the aim of the present study was to investigate workload and its relationship with fatigue among train drivers in Keshesh section of Iranian Railway Company. .Material and Method: This descriptive analytical study was done among 100 train drivers in Keshesh section of Iranian Railway industry. They were selected by simple random sampling. The NASA-TLX workload scale and Samn-Perelli fatigue scale were respectively used to investigate workload and fatigue. Data were analyzed by Paired t-test and Spearman correlation coefficient. . Result: According to the NASA-TLX results, effort and mental workload with the mean score of 74/22 and 73/31 were respectively the most important attributes of workload among train drivers. No significant relationship was observed between workload and level of fatigue before departure and half an hour before reaching the destination station (P>0.05. However, the relationship between of workload and level of fatigue half an hour before the end of shift (on the way back to the origin station was statistically significant (P=0.048 among the sample population. . Conclusion: Effort and mental workload were the most important attributes of workload among train drivers. By focusing on these two variables and adopting fatigue management programs, fatigue and workload can be controlled and the efficiency of the whole system can be enhanced accordingly.
Radiological safety training for uranium facilities

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-02-01

This handbook contains recommended training materials consistent with DOE standardized core radiological training material. These materials consist of a program management guide, instructor`s guide, student guide, and overhead transparencies.
Addressing fear of crime in public space: gender differences in reaction to safety measures in train transit.

Science.gov (United States)

Yavuz, Nilay; Welch, Eric W

2010-01-01

Research has identified several factors that affect fear of crime in public space. However, the extent to which gender moderates the effectiveness of fear-reducing measures has received little attention. Using data from the Chicago Transit Authority Customer Satisfaction Survey of 2003, this study aims to understand whether train transit security practices and service attributes affect men and women differently. Findings indicate that, while the presence of video cameras has a lower effect on women's feelings of safety compared with men, frequent and on-time service matters more to male passengers. Additionally, experience with safety-related problems affects women significantly more than men. Conclusions discuss the implications of the study for theory and gender-specific policies to improve perceptions of transit safety.
Identifying current training provision and future training needs in allergy available for UK general practice trainees: national cross-sectional survey of General Practitioner Specialist Training programme directors.

Science.gov (United States)

Ellis, Jayne; Rafi, Imran; Smith, Helen; Sheikh, Aziz

2013-03-01

There are ongoing concerns about the quality of care provision for allergy in primary care. To identify current training provision in allergy to GP trainees and to understand how this could be enhanced. A cross-sectional survey of GP Speciality Training (GPST) programme directors was undertaken. Programme directors of the 174 GPST schemes were sent an online questionnaire which was informed by the content of the Royal College of General Practitioners curriculum. Quantitative data were descriptively analysed and a thematic analysis was undertaken of free text responses. We obtained responses from 146 directors representing 106 training programmes. Responses indicated that two-thirds (62%, 95% CI 53.1 to 71.5) of programmes were providing at least some allergy training, with the remaining third stating that they either provided no training or were unsure. Overall, one-third (33%, 95% CI 22.7 to 42.2) of programme directors believed that all the relevant allergy-related curriculum requirements were being met. Where provided, this training was believed to be best for organ-specific allergic disorders but was thought to be poorer for systemic allergic disorders, particularly food allergy where 67% (95% CI 57.5 to 76.5) of respondents indicated that training was poor. There was considerable interest in increasing the allergy training provided, preferably through eLearning modules and problem-based learning materials supported by those with relevant specialist knowledge. This UK-wide survey has identified important gaps in the training of GP trainees in relation to allergy care. Addressing these gaps, particularly in the management of systemic allergic disorders, should help to improve delivery of primary care-based allergy care.
Implementing and measuring safety goals and safety culture. 4. Utility's Activities for Better Safety Culture After the JCO Accident

International Nuclear Information System (INIS)

Omoto, Akira

2001-01-01

The criticality accident at the JCO plant prompted the Government to enact a law for nuclear emergency preparedness. The nuclear industry established NSnet to facilitate opportunities for peer review among its members. This paper describes the activities by NSnet and TEPCO's Kashiwazaki-Kariwa nuclear power station (NPS) for a better safety culture. Created as a voluntary organization by the nuclear industry in 1999, NSnet has 35 members and is assisted by CRIEPI and NUPEC for its activities relevant to human factors. Given the fact that nuclear facility operators not belonging to WANO had no institutional system available for exchange of experiences and good practices for better safety among themselves, NSnet's activities focus on peer review by member organizations and onsite seminars. Starting April 2000 with visits to three fuel fabricators, NSnet intends to have 23 peer-review visits in 2 yr (Ref. 1). The six-member review team stays on-site for 4 days, during which time they review-using guidelines available from WANO and IAEA-OSART-six areas: organization/management, emergency preparedness, education/training, operation/ maintenance, protection against occupational radiation exposure, and prevention of accidents. A series of on-site seminars is held at members' nuclear facilities, to which NSnet dispatches experts for lectures. NSnet plans to hold such seminars twice per month. Other activities include information-sharing through a newsletter, a Web site (www. nsnet.gr.jp), and others. Although considerable differences exist in the design and the practices in operation/maintenance between power reactors and JCO, utilities can extract lessons from the accident that will be worth consideration for their own facilities in the areas of safety culture, education and training, and interface between design and operation. This thinking prompted the Nuclear Safety Promotion Center at Kashiwazaki-Kariwa NPS, to which the author belonged at that time, to launch the
The future of patient safety: Surgical trainees accept virtual reality as a new training tool

Directory of Open Access Journals (Sweden)

Vogelbach Peter

2008-06-01

Full Text Available Abstract Background The use of virtual reality (VR has gained increasing interest to acquire laparoscopic skills outside the operating theatre and thus increasing patients' safety. The aim of this study was to evaluate trainees' acceptance of VR for assessment and training during a skills course and at their institution. Methods All 735 surgical trainees of the International Gastrointestinal Surgery Workshop 2006–2008, held in Davos, Switzerland, were given a minimum of 45 minutes for VR training during the course. Participants' opinion on VR was analyzed with a standardized questionnaire. Results Fivehundred-twenty-seven participants (72% from 28 countries attended the VR sessions and answered the questionnaires. The possibility of using VR at the course was estimated as excellent or good in 68%, useful in 21%, reasonable in 9% and unsuitable or useless in 2%. If such VR simulators were available at their institution, most course participants would train at least one hour per week (46%, two or more hours (42% and only 12% wouldn't use VR. Similarly, 63% of the participants would accept to operate on patients only after VR training and 55% to have VR as part of their assessment. Conclusion Residents accept and appreciate VR simulation for surgical assessment and training. The majority of the trainees are motivated to regularly spend time for VR training if accessible.
Therapeutic results and safety of postoperative radiotherapy for keloid after repeated Cesarean section in immediate postpartum period

International Nuclear Information System (INIS)

Kim Ju Ree; Lee, Sang Hoon

2012-01-01

To evaluate the effectiveness and safety of postoperative radiotherapy for the treatment of keloid scars administered immediately after Cesarean section. A total of 26 postpartum patients with confirmed keloids resulting from previous Cesarean sections received either 12 or 15 Gy radiotherapy. The radiotherapy was divided into three 6 MeV electron beam fractions administered during the postpartum period immediately following the fi nal Cesarean section. To evaluate ovarian safety, designated doses of radiation were estimated at the calculated depth of the ovaries using a solid plate phantom and an ionization chamber with the same lead cutout as was used for the treatment of Cesarean section operative scars and a tissue equivalent bolus. In total, the control rate was 77% (20 patients), while six (23%) developed focally elevated keloids (ranging from 0.5 to 2 cm in length) in the middle of the primary abdominal scar. Five patients experienced mild hyperpigmentation. Nonetheless, most patients (96%) were satisfied with the treatment results. The estimated percentage of the applied radiation doses that reached the calculated depth of the ovaries ranged from 0.0033% to 0.0062%. When administered during the immediate postpartum period, postoperative electron beam radiotherapy for repeated Cesarean section scars is generally safe and produces good cosmetic results with minimal toxicity.
Therapeutic results and safety of postoperative radiotherapy for keloid after repeated Cesarean section in immediate postpartum period

Energy Technology Data Exchange (ETDEWEB)

Kim Ju Ree; Lee, Sang Hoon [Cheil General Hospital and Women' s Healthcare Center, Kwandong University College of Medicine, Seoul (Korea, Republic of)

2012-06-15

To evaluate the effectiveness and safety of postoperative radiotherapy for the treatment of keloid scars administered immediately after Cesarean section. A total of 26 postpartum patients with confirmed keloids resulting from previous Cesarean sections received either 12 or 15 Gy radiotherapy. The radiotherapy was divided into three 6 MeV electron beam fractions administered during the postpartum period immediately following the fi nal Cesarean section. To evaluate ovarian safety, designated doses of radiation were estimated at the calculated depth of the ovaries using a solid plate phantom and an ionization chamber with the same lead cutout as was used for the treatment of Cesarean section operative scars and a tissue equivalent bolus. In total, the control rate was 77% (20 patients), while six (23%) developed focally elevated keloids (ranging from 0.5 to 2 cm in length) in the middle of the primary abdominal scar. Five patients experienced mild hyperpigmentation. Nonetheless, most patients (96%) were satisfied with the treatment results. The estimated percentage of the applied radiation doses that reached the calculated depth of the ovaries ranged from 0.0033% to 0.0062%. When administered during the immediate postpartum period, postoperative electron beam radiotherapy for repeated Cesarean section scars is generally safe and produces good cosmetic results with minimal toxicity.

Environment, safety and health training catalog

International Nuclear Information System (INIS)

Hurley, L.; Brittenham, P.

1991-12-01

The ES ampersand H Training Catalog is a tool to assist managers in determining which training courses they require their employees to complete. The narrative description under ''Who Shall Attend'' describes the characteristics of the employees and contractors under the direction of Sandia who are required by law, regulation, DOE Order, or SNL Directive to complete the training in order to be in compliance. The narrative is ''Who Should Attend'' describes the individuals for which the course is 'highly recommended,'' although they are not mandated to attend
Education and training in nuclear engineering and safety

International Nuclear Information System (INIS)

Moons, F.; Safieh, J.; Giot, M.; Mavko, B.; Sehgal, Raj B.; Schaefer, A.; Van Goethem, G.; D'haeseleer, W.

2007-01-01

The need to preserve, enhance or strengthen nuclear knowledge is worldwide recognized since a couple of years. Within the 5th framework program the European Commission supports the European nuclear higher education network. The ENEN contract started on Jan 1, 2002 and lasts for 24 months. The Commission support for this 'accompanying measure' amounts to EUR 197 716. Based upon a year-long extensive exchange of views between the partners of ENEN, consisting of a representative cross section of nuclear academic institutions and research laboratories of the EU-25, a coherent and practicable concept for a European Master of Science in Nuclear Engineering has emerged. The concept is compatible with the Bologna philosophy of higher education for academic education in Europe. Pursuing the sustainability of the concept, the ENEN partners organized themselves in a non-profit-making association. Within the 6th framework program, the Commission services favourably evaluated the proposal: 'Nuclear European Platform of Training and University Organisations'. The objectives of the NEPTUNO co-ordination action are to establish a fair dialogue and a strong interaction between the academic and the industrial world and to bring all nuclear education and training activities under a common strategy of the ENEN type. The present proposal schedules for 18 months and the Commission earmarked a financial contribution of EUR 830 619. (author)
Driver characteristics associated with child safety seat usage in Malaysia: a cross-sectional study.

Science.gov (United States)

Kulanthayan, S; Razak, Ahmad; Schenk, Ellen

2010-03-01

The rapidly motorizing environment in Malaysia has made child occupant safety a current public health concern. The usage of child safety seats (CSS) is a widely regarded intervention to enhance child occupant safety, yet no study has been conducted on CSS in Malaysia. This study aims to determine the CSS usage rates in Malaysia and to assess driver characteristics that are associated with CSS usage. Nine variables - urban versus rural study location, age, gender, marital status, educational status, monthly family income, number of children present in the vehicle, distance traveled to the study location, and attitude - were examined through a cross-sectional study of interviewing drivers of 230 vehicles transporting at least one child safety in Malaysia. The results indicate that interventional efforts should focus on educational programs geared toward drivers that are less educated or extended family members who inconsistently transport young children. Furthermore, any educational efforts could be strongly enhanced by legislation mandating the use of CSS. Every effort should be made to thoroughly assess the effectiveness of any educational or legislative activities that are implemented. Copyright 2009 Elsevier Ltd. All rights reserved.
Safety Training: Ergonomie - Sensibilisation à l'ergonomie bureautique

CERN Multimedia

Laetitia Laddada

2005-01-01

Nous vous proposons une 1/2 journée de sensibilisation sur les risques engendrés par une mauvaise posture lors du travail sur écran (mal de dos, fatigue visuelle, douleurs des poignets...) et des bonnes pratiques pour y remédier. Les prochaines sessions auront lieu le 24 février 2005 (matin et après-midi). Les cours sont pris en charge par la Commission de Sécurité et animés par Pily Clemente et Marion Ribordy de « PM postures ». L'inscription via EDH est obligatoire. Pour plus d'information et inscription par EDH à ce cours, veuillez consulter les pages Formation et Développement (groupe sécurité) de HR, ou contacter l'organisateur. Les places seront attribuées dans l'ordre de réception des inscriptions. Organisateur : Ana-Paula Bernardes/SC-GS (71385) Ana-paula.bernardes@cern.ch FORMATION EN SECURITE SAFETY TRAINING Laetitia Laddada ...
Safety Training: Ergonomie - Sensibilisation à l'ergonomie bureautique

CERN Multimedia

Laetitia Laddada

2005-01-01

Nous vous proposons une 1/2 journée de sensibilisation sur les risques engendrés par une mauvaise posture lors du travail sur écran (mal de dos, fatigue visuelle, douleurs des poignets...) et des bonnes pratiques pour y remédier. Les prochaines sessions auront lieu le 24 février 2005 (matin et après-midi). Les cours sont pris en charge par la Commission de Sécurité et animés par Pily Clemente et Marion Ribordy de « PM postures ». L'inscription via EDH est obligatoire. Pour plus d'information et inscription par EDH à ce cours, veuillez consulter les pages Formation et Développement (groupe sécurité) de HR, ou contacter l'organisateur. Les places seront attribuées dans l'ordre de réception des inscriptions. Organisateur : Ana-Paula Bernardes/SC-GS (71385) Ana-paula.bernardes@cern.ch FORMATION EN SECURITE SAFETY TRAINING Laetitia Laddada 7...
Safety Training: Ergonomie - Sensibilisation à l'ergonomie bureautique

CERN Multimedia

Laetitia Laddada

2004-01-01

Nous vous proposons une 1/2 journée de sensibilisation sur les risques engendrés par une mauvaise posture lors du travail sur écran (mal de dos, fatigue visuelle, douleurs des poignets...) et des bonnes pratiques pour y remédier. La prochaine session aura lieu le 30 septembre 2004 (matin). Les cours sont pris en charge par la Commission de Sécurité et animés par Pily Clemente et Marion Ribordy de « PM postures ». L'inscription via EDH est obligatoire. Pour plus d'information et inscription par EDH à ce cours, veuillez consulter les pages Formation & Développement (Groupe Sécurité) des HR, ou contacter l'organisateur. Les places seront attribuées dans l'ordre de réception des inscriptions. Organisateur : Ana-Paula Bernardes/SC-GS (71385) Ana-paula.bernardes@cern.ch FORMATION EN SECURITE SAFETY TRAINING Laetitia Laddada 73811 - 79236 ...
Effect of Kiken-Yochi training (KYT) induction on patient safety at the department of radiological technology

International Nuclear Information System (INIS)

Yasuda, Mitsuyoshi; Uchiyama, Yushi; Sakiyama, Koshi; Shibata, Masako; Sasaki, Haruaki; Kato, Kyoichi; Nakazawa, Yasuo; Sanbe, Takeyuki; Yoshikawa, Kohki

2013-01-01

In this report, we evaluated whether radiological technologists' (RTs') awareness of patient safety would improve and what kind of effects would be seen at the department of radiological technology by introducing KYT [K: kiken (hazard), Y: yochi (prediction), T: (training)]. KYT was carried out by ten RTs based on a KYT sheet for the department of radiological technology. To evaluate the effects of KYT, we asked nine questions each to ten participants before and after KYT enforcement with regard to their attitude to patient safety and to operating procedures for working safely. Significant improvements after KYT enforcement were obtained in two items concerning medical safety: It is important for any risk to be considered by more than one person; The interest in preventive measures against medical accident degree conducted now) and one concerning operating procedures (It is necessary to have a nurse assist during testing with the mobile X-ray apparatus) (p<0.05). Performing KYT resulted in improved awareness of the importance of patient safety. KYT also enabled medical staffers to evaluate objectively whether the medical safety measures currently performed would be effective for patients. (author)
Modifications to nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2004-01-01

control and that the modified configuration conforms to the approved basis for granting a nuclear power plant operating licence. The main purpose of the recommendations concerning changes of management is to give general guidance on performing those changes in such a way that the safety of the plant is not compromised. This Safety Guide deals with the intended modification of structures, systems and components, operational limits and conditions, procedures and software, and the management systems and tools for the operation of a nuclear power plant. The recommendations made cover the whole modification process, from conception to completion. The justification for undertaking modifications is outside the scope of this Safety Guide. The modification and/or refurbishment of nuclear power plants for the purpose of extending the design lifetime could necessitate many major design modifications and special re-evaluation of plant safety (see Ref. [2]), and is therefore outside the scope of this publication. Section 2 gives guidance on general methods for modifications that could be implemented at nuclear power plants. Section 3 identifies the roles and responsibilities of various organizations involved in the modification process. Sections 4 and 5 give guidance on the different types of modification and their assessment in respect of safety aspects, and Section 4 provides guidelines on subsequent categorization. Section 6 deals with aspects of temporary modifications. Sections 7 and 8 give guidance on implementation of different types of modifications. Sections 9, 10 and 11 give basic recommendations on quality assurance, training and management of documentation. Comprehensive guidance on these matters can be found in the appropriate Safety Guides
Modifications to nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2007-01-01

control and that the modified configuration conforms to the approved basis for granting a nuclear power plant operating licence. The main purpose of the recommendations concerning changes of management is to give general guidance on performing those changes in such a way that the safety of the plant is not compromised. This Safety Guide deals with the intended modification of structures, systems and components, operational limits and conditions, procedures and software, and the management systems and tools for the operation of a nuclear power plant. The recommendations made cover the whole modification process, from conception to completion. The justification for undertaking modifications is outside the scope of this Safety Guide. The modification and/or refurbishment of nuclear power plants for the purpose of extending the design lifetime could necessitate many major design modifications and special re-evaluation of plant safety, and is therefore outside the scope of this publication. Section 2 gives guidance on general methods for modifications that could be implemented at nuclear power plants. Section 3 identifies the roles and responsibilities of various organizations involved in the modification process. Sections 4 and 5 give guidance on the different types of modification and their assessment in respect of safety aspects, and Section 4 provides guidelines on subsequent categorization. Section 6 deals with aspects of temporary modifications. Sections 7 and 8 give guidance on implementation of different types of modifications. Sections 9, 10 and 11 give basic recommendations on quality assurance, training and management of documentation. Comprehensive guidance on these matters can be found in the appropriate Safety Guides
Laparoscopic simulation training in gynaecology: Current provision and staff attitudes - a cross-sectional survey.

Science.gov (United States)

Burden, Christy; Fox, Robert; Hinshaw, Kim; Draycott, Timothy J; James, Mark

2016-01-01

The objectives of this study were to explore current provision of laparoscopic simulation training, and to determine attitudes of trainers and trainees to the role of simulators in surgical training across the UK. An anonymous cross-sectional survey with cluster sampling was developed and circulated. All Royal College of Obstetricians and Gynaecologists (RCOG) Training Programme Directors (TPD), College Tutors (RCT) and Trainee representatives (TR) across the UK were invited to participate. One hundred and ninety-six obstetricians and gynaecologists participated. Sixty-three percent of hospitals had at least one box trainer, and 14.6% had least one virtual-reality simulator. Only 9.3% and 3.6% stated that trainees used a structured curriculum on box and virtual-reality simulators, respectively. Respondents working in a Large/Teaching hospital (p = 0.008) were more likely to agree that simulators enhance surgical training. Eighty-nine percent agreed that simulators improve the quality of training, and should be mandatory or desirable for junior trainees. Consultants (p = 0.003) and respondents over 40 years (p = 0.011) were more likely to hold that a simulation test should be undertaken before live operation. Our data demonstrated, therefore, that availability of laparoscopic simulators is inconsistent, with limited use of mandatory structured curricula. In contrast, both trainers and trainees recognise a need for greater use of laparoscopic simulation for surgical training.
Improving operating room safety

Directory of Open Access Journals (Sweden)

Garrett Jill

2009-11-01

Full Text Available Abstract Despite the introduction of the Universal Protocol, patient safety in surgery remains a daily challenge in the operating room. This present study describes one community health system's efforts to improve operating room safety through human factors training and ultimately the development of a surgical checklist. Using a combination of formal training, local studies documenting operating room safety issues and peer to peer mentoring we were able to substantially change the culture of our operating room. Our efforts have prepared us for successfully implementing a standardized checklist to improve operating room safety throughout our entire system. Based on these findings we recommend a multimodal approach to improving operating room safety.
Dukovany nuclear power plant safety

International Nuclear Information System (INIS)

1999-01-01

Presentation covers recommended safety issues for the Dukovany NPP which have been solved with satisfactory conclusions. Safety issues concerned include: radiation safety; nuclear safety; security; emergency preparedness; health protection at work; fire protection; environmental protection; chemical safety; technical safety. Quality assurance programs at all stages on NPP life time is described. Report includes description of NPP staff training provision, training simulator, emergency operating procedures, emergency preparedness, Year 2000 problem, inspections and life time management. Description of Dukovany Plant Safety Analysis Projects including integrity of the equipment, modernisation, equipment innovation and safety upgrading program show that this approach corresponds to the actual practice applied in EU countries, and fulfilment of current IAEA requirements for safety enhancement of the WWER 440/213 units in the course of MORAWA Equipment Upgrading program
Virtual reality simulation for construction safety promotion.

Science.gov (United States)

Zhao, Dong; Lucas, Jason

2015-01-01

Safety is a critical issue for the construction industry. Literature argues that human error contributes to more than half of occupational incidents and could be directly impacted by effective training programs. This paper reviews the current safety training status in the US construction industry. Results from the review evidence the gap between the status and industry expectation on safety. To narrow this gap, this paper demonstrates the development and utilisation of a training program that is based on virtual reality (VR) simulation. The VR-based safety training program can offer a safe working environment where users can effectively rehearse tasks with electrical hazards and ultimately promote their abilities for electrical hazard cognition and intervention. Its visualisation and simulation can also remove the training barriers caused by electricity's features of invisibility and dangerousness.
The Armstrong Institute: An Academic Institute for Patient Safety and Quality Improvement, Research, Training, and Practice.

Science.gov (United States)

Pronovost, Peter J; Holzmueller, Christine G; Molello, Nancy E; Paine, Lori; Winner, Laura; Marsteller, Jill A; Berenholtz, Sean M; Aboumatar, Hanan J; Demski, Renee; Armstrong, C Michael

2015-10-01

Academic medical centers (AMCs) could advance the science of health care delivery, improve patient safety and quality improvement, and enhance value, but many centers have fragmented efforts with little accountability. Johns Hopkins Medicine, the AMC under which the Johns Hopkins University School of Medicine and the Johns Hopkins Health System are organized, experienced similar challenges, with operational patient safety and quality leadership separate from safety and quality-related research efforts. To unite efforts and establish accountability, the Armstrong Institute for Patient Safety and Quality was created in 2011.The authors describe the development, purpose, governance, function, and challenges of the institute to help other AMCs replicate it and accelerate safety and quality improvement. The purpose is to partner with patients, their loved ones, and all interested parties to end preventable harm, continuously improve patient outcomes and experience, and eliminate waste in health care. A governance structure was created, with care mapped into seven categories, to oversee the quality and safety of all patients treated at a Johns Hopkins Medicine entity. The governance has a Patient Safety and Quality Board Committee that sets strategic goals, and the institute communicates these goals throughout the health system and supports personnel in meeting these goals. The institute is organized into 13 functional councils reflecting their behaviors and purpose. The institute works daily to build the capacity of clinicians trained in safety and quality through established programs, advance improvement science, and implement and evaluate interventions to improve the quality of care and safety of patients.
PSA in operator training

International Nuclear Information System (INIS)

Nos, V.; Faig, J.; Plesa, P.; Delgado, J. L.

2000-01-01

The systematic approach to training is internationally accepted as the best method to achieve and maintain the qualification and competence of power plant personnel and to guarantee the quality of their training. Following the recommendations and guidelines of international organisations competent in the field, TECNATOM SA has developed projects based on the systematic approach to training for all Spanish nuclear power plants. One of the latest projects was the systematic approach to training developed for the operation personnel of ASCO Nuclear Power Plant. In this case, certain results of the Probabilistic Safety Analysis (PSA) which complement the systematic safety and reliability criteria of the systematic approach to training process have been incorporated in the traditional processes of work and task analysis and training plan design. This incorporation provides the training manager with additional criteria based not only on safety aspects obtained through the statistical treatment of considerations of skilled technical personnel (operators, operation chief supervisors, etc), but also on the independent criterion of the PSA. The inclusion of this approach basically affects all systematics in two of its stages: During the selection process of operating practices in SMR or SGI, the possible scenarios have been associated with all those situations where human actions which lead to an initiating event or human actions to mitigate an initiating event, may take place, as defined in the PSA. During the scenario development process, the instruments involved in the performance of human actions which originate or mitigate an event taking place have been identified. This pakes it possible to reconcile the scenario event sequence with the sequence considered in the PSA study, as the most likely to provoke a more serious accident. The incorporation of these PSA results contributes to the strengthening of safety aspects in training in an objective way, and confirms that
Use of alternative and complementary therapies in labor and delivery care: a cross-sectional study of midwives' training in Catalan hospitals accredited as centers for normal birth.

Science.gov (United States)

Muñoz-Sellés, Ester; Vallès-Segalés, Antoni; Goberna-Tricas, Josefina

2013-11-15

The use of complementary and alternative medicine (CAM) and complementary and alternative therapies (CAT) during pregnancy is increasing. Scientific evidence for CAM and CAT in the field of obstetrics mainly covers pain relief in labor. Midwives are responsible for labor and delivery care: hence, their knowledge of CAM and CAT is important. The aims of this study are to describe the professional profile of midwives who provide care for natural childbirth in Catalan hospitals accredited as centers for normal birth, to assess midwives' level of training in CAT and their use of these therapies, and to identify specific resources for CAT in labor wards. A descriptive, cross-sectional, quantitative method was used to assess the level of training and use of CAT by midwives working at 28 hospitals in Catalonia, Spain, accredited as public normal birth centers. Just under a third of midwives (30.4%) trained in CAT after completion of basic training. They trained in an average of 5.97 therapies (SD 3.56). The number of CAT in which the midwives were trained correlated negatively with age (r = - 0.284; p trained in CAT considered that the following therapies were useful or very useful for pain relief during labor and delivery: relaxation techniques (64.3%), hydrotherapy (84.8%) and the application of compresses to the perineum (75.9%). The availability of resources for providing CAT during normal birth care varied widely from center to center. Age may influence attitudes towards training. It is important to increase the number of midwives trained in CAM for pain relief during childbirth, in order to promote the use of CAT and ensure efficiency and safety. CAT resources at accredited hospitals providing normal childbirth care should also be standardized.
Instructor training at the Swedish Nuclear Power Training and Safety Centre

International Nuclear Information System (INIS)

Persson, P.-E.

1988-01-01

In spite of the fact that full-scope simulators are very powerful training tools, the transfer of knowledge and skills to the trainees during simulator training is completely dependent on the instructors' technical competence and their ability to transfer it to the trainees by efficient use of these training tools. Accordingly, the instructor candidates must pass a technical training programme equivalent to that for shift supervisors and have at least a few months of experience in each operator position at a nuclear power plant. To be authorized, the instructors must also pass a teacher training programme consisting of four 2 week instructor courses. To stay authorized the instructors must pass an annual retraining programme consisting of at least two weeks of technical refresher and one week teacher retraining. The retraining programme also includes at least three weeks of operational practice at a nuclear power plant. (author)
Training practitioners in preparing systematic reviews: a cross-sectional survey of participants in the Australasian Cochrane Centre training program

Directory of Open Access Journals (Sweden)

Silagy Chris

2002-06-01

Full Text Available Abstract Background Although systematic reviews of health care interventions are an invaluable tool for health care providers and researchers, many potential authors never publish reviews. This study attempts to determine why some people with interest in performing systematic reviews do not subsequently publish a review; and what steps could possibly increase review completion. Methods Cross-sectional survey by email and facsimile of the 179 participants in Australasian Cochrane Centre training events between 1998 and 2000. Results Ninety-two participants responded to the survey (51 percent. Response rate of deliverable surveys was 82 percent (92/112. The remainder of the participants had invalid or no contact information on file. More than 75 percent of respondents felt that the current workshops met their needs for training. The most critical barriers to completion of a Cochrane review were: lack of time (80 percent, lack of financial support (36 percent, methodological problems (23 percent and problems with group dynamics (10 percent. Conclusions Strategies to protect reviewer time and increase the efficiency of the review process may increase the numbers of trained reviewers completing a systematic review.
Developing Measures for Assessing the Causality of Safety Culture in a Petrochemical Industry

Energy Technology Data Exchange (ETDEWEB)

Wu, T.-C., E-mail: tcwu@sunrise.hk.edu.t [HungKuang University, Department of Safety, Health and Environmental Engineering (China); Lin, C.-H.; Shiau, S.-Y. [HungKuang University, Institute of Occupational Safety and Hazard Prevention (China)

2009-12-15

This paper discusses safety culture in the petrochemical sector and the causes and consequences of safety culture. A sample of 520 responses selected by simple random sampling completed questionnaires for this survey, the return rate was 86.75%. The research instrument comprises four sections: basic information, the safety leadership scale (SLS), the safety climate scale (SCS), and the safety performance scale (SPS). SPSS 12.0, a statistical software package, was used for item analysis, validity analysis, and reliability analysis. Exploratory factor analysis indicated that (1) SLS abstracted three factors such as safety caring, safety controlling, and safety coaching; (2) SCS comprised three factors such as emergency response, safety commitment, and risk perception; and (3) SPS was composed of accident investigation, safety training, safety inspections, and safety motivation. We conclude that the SLS, SCS, and SPS developed in this paper have good construct validity and internal consistency and can serve as the basis for future research.
Developing Measures for Assessing the Causality of Safety Culture in a Petrochemical Industry

International Nuclear Information System (INIS)

Wu, T.-C.; Lin, C.-H.; Shiau, S.-Y.

2009-01-01

This paper discusses safety culture in the petrochemical sector and the causes and consequences of safety culture. A sample of 520 responses selected by simple random sampling completed questionnaires for this survey, the return rate was 86.75%. The research instrument comprises four sections: basic information, the safety leadership scale (SLS), the safety climate scale (SCS), and the safety performance scale (SPS). SPSS 12.0, a statistical software package, was used for item analysis, validity analysis, and reliability analysis. Exploratory factor analysis indicated that (1) SLS abstracted three factors such as safety caring, safety controlling, and safety coaching; (2) SCS comprised three factors such as emergency response, safety commitment, and risk perception; and (3) SPS was composed of accident investigation, safety training, safety inspections, and safety motivation. We conclude that the SLS, SCS, and SPS developed in this paper have good construct validity and internal consistency and can serve as the basis for future research.

Safety assessment and verification for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2004-01-01

This Safety Guide was prepared under the IAEA programme for safety standards for nuclear power plants. The present publication is a revision of the IAEA Safety Guide on Management of Nuclear Power Plants for Safe Operation issued in 1984. It supplements Section 2 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation. Nuclear power technology is different from the customary technology of power generation from fossil fuel and by hydroelectric means. One major difference between the management of nuclear power plants and that of conventional generating plants is the emphasis that should be placed on nuclear safety, quality assurance, the management of radioactive waste and radiological protection, and the accompanying national regulatory requirements. This Safety Guide highlights the important elements of effective management in relation to these aspects of safety. The attention to be paid to safety requires that the management recognize that personnel involved in the nuclear power programme should understand, respond effectively to, and continuously search for ways to enhance safety in the light of any additional requirements socially and legally demanded of nuclear energy. This will help to ensure that safety policies that result in the safe operation of nuclear power plants are implemented and that margins of safety are always maintained. The structure of the organization, management standards and administrative controls should be such that there is a high degree of assurance that safety policies and decisions are implemented, safety is continuously enhanced and a strong safety culture is promoted and supported. The objective of this publication is to guide Member States in setting up an operating organization which facilitates the safe operation of nuclear power plants to a high level internationally. The second objective is to provide guidance on the most important organizational elements in order to contribute to a strong safety
Safety assessment and verification for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2005-01-01

This Safety Guide was prepared under the IAEA programme for safety standards for nuclear power plants. The present publication is a revision of the IAEA Safety Guide on Management of Nuclear Power Plants for Safe Operation issued in 1984. It supplements Section 2 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation. Nuclear power technology is different from the customary technology of power generation from fossil fuel and by hydroelectric means. One major difference between the management of nuclear power plants and that of conventional generating plants is the emphasis that should be placed on nuclear safety, quality assurance, the management of radioactive waste and radiological protection, and the accompanying national regulatory requirements. This Safety Guide highlights the important elements of effective management in relation to these aspects of safety. The attention to be paid to safety requires that the management recognize that personnel involved in the nuclear power programme should understand, respond effectively to, and continuously search for ways to enhance safety in the light of any additional requirements socially and legally demanded of nuclear energy. This will help to ensure that safety policies that result in the safe operation of nuclear power plants are implemented and that margins of safety are always maintained. The structure of the organization, management standards and administrative controls should be such that there is a high degree of assurance that safety policies and decisions are implemented, safety is continuously enhanced and a strong safety culture is promoted and supported. The objective of this publication is to guide Member States in setting up an operating organization which facilitates the safe operation of nuclear power plants to a high level internationally. The second objective is to provide guidance on the most important organizational elements in order to contribute to a strong safety
THE EFFICIENCY IMPROVING OF PILOTS AND CADETS TRAINING TO SAFETY CONTROL USING THE MODIFICATIONS OF CLASSICAL METHOD OF "ROY" (PSO

Directory of Open Access Journals (Sweden)

V. V. Yurasov

2017-01-01

Full Text Available The article explains the use of modifications the classical method PSO to optimize the training pilots task on aircraft simulators. Model is based on the identification of the specific guarantee of safety in the task of training pilots of the features of simulation with the use of modern optimization models for long-term quantitative forecast of random processes. The author proved that the classical optimization techniques to aircraft supporting function, the input and output variables, and classes of equations defined by the model author. These circumstances lead to the fact that the obtained models do not have sufficient flexibility that in turn affects their behavior when adding new data points. The increased accuracy and the introduction of additional variables in the optimization problem of security is solved based on the methodology PSO. On the basis of mathematical simulation shows the potential of the PSO for the identification of quality indicators of a new level for the purpose of guaranteeing flight safety. The method of group accounting of arguments presents an original method for solving problems that require structural and parametric identification of models. The author's approach to the problem of optimization consists in taking into account qualitative indicators in terms of aviation events at the gym. On the basis of the mathematical apparatus created a dynamic model based on the classical method PSO. The results obtained are of high precision in compliance with international regulations guaranteeing flight safety and pilot training ICAO and SHEL. Therefore, the method of group accounting of arguments will be effective mathematical tool to build the model and training procedures.
Training Requirements in OSHA Standards. Revised.

Science.gov (United States)

Occupational Safety and Health Administration, Washington, DC.

This booklet contains excerpts of the training-related requirements of the standards promulgated by the Occupational Safety and Health Administration (OSHA). It is designed as an aid for employers, safety and health professionals, and others who need to know training requirements. (References to training may be difficult to locate in the long and…
Implementation of a Radiological Safety Coach program

Energy Technology Data Exchange (ETDEWEB)

Konzen, K.K. [Safe Sites of Colorado, Golden, CO (United States). Rocky Flats Environmental Technology Site; Langsted, J.M. [M.H. Chew and Associates, Golden, CO (United States)

1998-02-01

The Safe Sites of Colorado Radiological Safety program has implemented a Safety Coach position, responsible for mentoring workers and line management by providing effective on-the-job radiological skills training and explanation of the rational for radiological safety requirements. This position is significantly different from a traditional classroom instructor or a facility health physicist, and provides workers with a level of radiological safety guidance not routinely provided by typical training programs. Implementation of this position presents a challenge in providing effective instruction, requiring rapport with the radiological worker not typically developed in the routine radiological training environment. The value of this unique training is discussed in perspective with cost-savings through better radiological control. Measures of success were developed to quantify program performance and providing a realistic picture of the benefits of providing one-on-one or small group training. This paper provides a description of the unique features of the program, measures of success for the program, a formula for implementing this program at other facilities, and a strong argument for the success (or failure) of the program in a time of increased radiological safety emphasis and reduced radiological safety budgets.
Implementation of a Radiological Safety Coach program

International Nuclear Information System (INIS)

Konzen, K.K.

1998-01-01

The Safe Sites of Colorado Radiological Safety program has implemented a Safety Coach position, responsible for mentoring workers and line management by providing effective on-the-job radiological skills training and explanation of the rational for radiological safety requirements. This position is significantly different from a traditional classroom instructor or a facility health physicist, and provides workers with a level of radiological safety guidance not routinely provided by typical training programs. Implementation of this position presents a challenge in providing effective instruction, requiring rapport with the radiological worker not typically developed in the routine radiological training environment. The value of this unique training is discussed in perspective with cost-savings through better radiological control. Measures of success were developed to quantify program performance and providing a realistic picture of the benefits of providing one-on-one or small group training. This paper provides a description of the unique features of the program, measures of success for the program, a formula for implementing this program at other facilities, and a strong argument for the success (or failure) of the program in a time of increased radiological safety emphasis and reduced radiological safety budgets
Electronic Health Record-Related Safety Concerns: A Cross-Sectional Survey of Electronic Health Record Users

Science.gov (United States)

Pajunen, Tuuli; Saranto, Kaija; Lehtonen, Lasse

2016-01-01

Background The rapid expansion in the use of electronic health records (EHR) has increased the number of medical errors originating in health information systems (HIS). The sociotechnical approach helps in understanding risks in the development, implementation, and use of EHR and health information technology (HIT) while accounting for complex interactions of technology within the health care system. Objective This study addresses two important questions: (1) “which of the common EHR error types are associated with perceived high- and extreme-risk severity ratings among EHR users?”, and (2) “which variables are associated with high- and extreme-risk severity ratings?” Methods This study was a quantitative, non-experimental, descriptive study of EHR users. We conducted a cross-sectional web-based questionnaire study at the largest hospital district in Finland. Statistical tests included the reliability of the summative scales tested with Cronbach’s alpha. Logistic regression served to assess the association of the independent variables to each of the eight risk factors examined. Results A total of 2864 eligible respondents provided the final data. Almost half of the respondents reported a high level of risk related to the error type “extended EHR unavailability”. The lowest overall risk level was associated with “selecting incorrectly from a list of items”. In multivariate analyses, profession and clinical unit proved to be the strongest predictors for high perceived risk. Physicians perceived risk levels to be the highest (Prisk levels (PeLearning courses on EHR-use was associated with lower risk for some of the risk factors. Conclusions Based on a large number of Finnish EHR users in hospitals, this study indicates that HIT safety hazards should be taken very seriously, particularly in operating rooms, procedure units, emergency departments, and intensive care units/critical care units. Health care organizations should use proactive and
Factors influencing safety among a group of commercial fishermen along the Texas Gulf Coast.

Science.gov (United States)

Levin, Jeffrey L; Gilmore, Karen; Shepherd, Sara; Wickman, Amanda; Carruth, Ann; Nalbone, J Torey; Gallardo, Gilbert; Nonnenmann, Matthew W

2010-10-01

The commercial fishing trades are among the most dangerous jobs in the world. Little published information exists regarding some populations of commercial fishermen such as along the United States Gulf Coast. Studying these unique and often vulnerable groups is important to characterize potential influences on or barriers to safety in anticipation of designing interventions that can change safety behaviors. Working closely with the United States Coast Guard (USCG), a cross-sectional convenience sample of Gulf Coast shrimp fishermen in and near the Port of Galveston, Texas, was surveyed. The survey included demographic factors and broadly covered areas such as type of work and fishing activities, general or global perceptions and beliefs related to safety and accidents, self-report of ability to use safety equipment or apply procedures aboard vessel, and training considerations. Surveys were obtained following informed consent (n = 133). Of the participants, 96.7% were male with 60.9% ≥40 years old. A majority were of Asian descent (57.1% of all fishermen, 82.1% of shrimp fishermen). Over half claimed to speak little or no English and nearly 60% considered the job to be very safe to neutral. A third to half of respondents expressed doubt about their knowledge of using essential safety equipment in the event of emergency. A large portion of the participants preferred hands-on safety training (40.6%). Important findings about this group of commercial fishermen will help with future development of effective prevention practices through the delivery of culturally appropriate safety awareness training. One element that must be addressed in training programs is to increase the awareness among fishermen about the severe occupational risks inherent in this type of work. Community trust and collaborative partnerships are essential to the success of such initiatives.
Strengthening leadership as a catalyst for enhanced patient safety culture: a repeated cross-sectional experimental study.

Science.gov (United States)

Kristensen, Solvejg; Christensen, Karl Bang; Jaquet, Annette; Møller Beck, Carsten; Sabroe, Svend; Bartels, Paul; Mainz, Jan

2016-05-13

Current literature emphasises that clinical leaders are in a position to enable a culture of safety, and that the safety culture is a performance mediator with the potential to influence patient outcomes. This paper aims to investigate staff's perceptions of patient safety culture in a Danish psychiatric department before and after a leadership intervention. A repeated cross-sectional experimental study by design was applied. In 2 surveys, healthcare staff were asked about their perceptions of the patient safety culture using the 7 patient safety culture dimensions in the Safety Attitudes Questionnaire. To broaden knowledge and strengthen leadership skills, a multicomponent programme consisting of academic input, exercises, reflections and discussions, networking, and action learning was implemented among the clinical area level leaders. In total, 358 and 325 staff members participated before and after the intervention, respectively. 19 of the staff members were clinical area level leaders. In both surveys, the response rate was >75%. The proportion of frontline staff with positive attitudes improved by ≥5% for 5 of the 7 patient safety culture dimensions over time. 6 patient safety culture dimensions became more positive (increase in mean) (pculture are remarkable, and imply that strengthening the leadership can act as a significant catalyst for patient safety culture improvement. Further studies using a longitudinal study design are recommended to investigate the mechanism behind leadership's influence on patient safety culture, sustainability of improvements over time, and the association of change in the patient safety culture measures with change in psychiatric patient safety outcomes. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/
A Novel Cast Removal Training Simulation to Improve Patient Safety.

Science.gov (United States)

Brubacher, Jacob W; Karg, Jeffrey; Weinstock, Peter; Bae, Donald S

2016-01-01

Cast application and removal are essential to orthopedics and performed by providers of variable training. Simulation training and practice of proper cast application and removal may reduce injury, optimize outcomes, and reduce health care costs. The purpose of this educational initiative was to develop, validate, and implement a novel simulation trainer and curriculum to improve safety during cast removal. In all, 30 thermocouples (Omega, Stamford, CT) were applied to a radius fracture model (Sawbones, Vashon, WA). After reduction and cast application, a saw (Stryker, Kalamazoo, MI) was used to cut the cast with temperature recording. Both "good" and "poor" techniques-as established by consensus best practices-were used. Maximal temperatures were compared to known thresholds for thermal injury; humans experience pain at temperatures exceeding 47°C and contact temperatures exceeding 60°C may lead to epidermal necrosis. Construct validity was evaluated by assessing novice (postgraduate year 1), intermediate (postgraduate year 3), and expert (pediatric orthopedic attending) performance. With the "good" technique, mean peak temperatures were 43°C + 4.3°C. The highest recorded was 51.9°C. With the "poor" technique, mean peak temperature was 75.2°C + 17.3°C. The maximum temperature recorded with the "poor" technique was 112.4°C. Construct validity testing showed that novices had the highest increases in temperatures (12.9°C). There was a decline in heat generation as experience increased with the intermediate group (9.7°C), and the lowest heat generation was seen in the expert group (5.0°C). A novel task simulator and curriculum have been developed to assess competency and enhance performance in the application and removal of casts. There was a 32.2°C temperature decrease when the proper cast saw technique was used. Furthermore, the "poor" technique consistently achieved temperatures that would cause epidermal necrosis in patients. Clinical experience was a
Increasing patient safety with neonates via handoff communication during delivery: a call for interprofessional health care team training across GME and CME

Directory of Open Access Journals (Sweden)

Vanderbilt AA

2017-06-01

Full Text Available Allison A Vanderbilt,1 Scott M Pappada,2 Howard Stein,3 David Harper,4 Thomas J Papadimos5 1Department of Family Medicine, 2Department of Anesthesiology, College of Medicine and Life Sciences, University of Toledo, 3Department of Pediatrics, ProMedica Toledo Children’s Hospital, 4Department of Obstetrics and Gynecology, ProMedica Toledo Hospital, 5Department of Anesthesiology, College of Medicine and the Life Sciences, University of Toledo, Toledo, OH, USA Abstract: Hospitals have struggled for years regarding the handoff process of communicating patient information from one health care professional to another. Ineffective handoff communication is recognized as a serious patient safety risk within the health care community. It is essential to take communication into consideration when examining the safety of neonates who require immediate medical attention after birth; effective communication is vital for positive patient outcomes, especially with neonates in a delivery room setting. Teamwork and effective communication across the health care continuum are essential for providing efficient, quality care that leads to favorable patient outcomes. Interprofessional simulation and team training can benefit health care professionals by improving interprofessional competence, defined as one’s knowledge of other professionals including an understanding of their training and skillsets, and role clarity. Interprofessional teams that include members with specialization in obstetrics, gynecology, and neonatology have the potential to considerably benefit from training effective handoff and communication practices that would ensure the safety of the neonate upon birth. We must strive to provide the most comprehensive systematic, standardized, interprofessional handoff communication training sessions for such teams, through Graduate Medical Education and Continuing Medical Education that will meet the needs across the educational continuum. Keywords
30 CFR 46.8 - Annual refresher training.

Science.gov (United States)

2010-07-01

... affect the miner's health or safety. (c) Refresher training must also address other health and safety...; information about the physical and health hazards of chemicals in the miner's work area, the protective... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR EDUCATION AND TRAINING...
Safety climate and self-reported injury: assessing the mediating role of employee safety control.

Science.gov (United States)

Huang, Yueng-Hsiang; Ho, Michael; Smith, Gordon S; Chen, Peter Y

2006-05-01

To further reduce injuries in the workplace, companies have begun focusing on organizational factors which may contribute to workplace safety. Safety climate is an organizational factor commonly cited as a predictor of injury occurrence. Characterized by the shared perceptions of employees, safety climate can be viewed as a snapshot of the prevailing state of safety in the organization at a discrete point in time. However, few studies have elaborated plausible mechanisms through which safety climate likely influences injury occurrence. A mediating model is proposed to link safety climate (i.e., management commitment to safety, return-to-work policies, post-injury administration, and safety training) with self-reported injury through employees' perceived control on safety. Factorial evidence substantiated that management commitment to safety, return-to-work policies, post-injury administration, and safety training are important dimensions of safety climate. In addition, the data support that safety climate is a critical factor predicting the history of a self-reported occupational injury, and that employee safety control mediates the relationship between safety climate and occupational injury. These findings highlight the importance of incorporating organizational factors and workers' characteristics in efforts to improve organizational safety performance.
Educating Next Generation Nuclear Criticality Safety Engineers at the Idaho National Laboratory

Energy Technology Data Exchange (ETDEWEB)

J. D. Bess; J. B. Briggs; A. S. Garcia

2011-09-01

One of the challenges in educating our next generation of nuclear safety engineers is the limitation of opportunities to receive significant experience or hands-on training prior to graduation. Such training is generally restricted to on-the-job-training before this new engineering workforce can adequately provide assessment of nuclear systems and establish safety guidelines. Participation in the International Criticality Safety Benchmark Evaluation Project (ICSBEP) and the International Reactor Physics Experiment Evaluation Project (IRPhEP) can provide students and young professionals the opportunity to gain experience and enhance critical engineering skills. The ICSBEP and IRPhEP publish annual handbooks that contain evaluations of experiments along with summarized experimental data and peer-reviewed benchmark specifications to support the validation of neutronics codes, nuclear cross-section data, and the validation of reactor designs. Participation in the benchmark process not only benefits those who use these Handbooks within the international community, but provides the individual with opportunities for professional development, networking with an international community of experts, and valuable experience to be used in future employment. Traditionally students have participated in benchmarking activities via internships at national laboratories, universities, or companies involved with the ICSBEP and IRPhEP programs. Additional programs have been developed to facilitate the nuclear education of students while participating in the benchmark projects. These programs include coordination with the Center for Space Nuclear Research (CSNR) Next Degree Program, the Collaboration with the Department of Energy Idaho Operations Office to train nuclear and criticality safety engineers, and student evaluations as the basis for their Master's thesis in nuclear engineering.
Educating Next Generation Nuclear Criticality Safety Engineers at the Idaho National Laboratory

International Nuclear Information System (INIS)

Bess, J.D.; Briggs, J.B.; Garcia, A.S.

2011-01-01

One of the challenges in educating our next generation of nuclear safety engineers is the limitation of opportunities to receive significant experience or hands-on training prior to graduation. Such training is generally restricted to on-the-job-training before this new engineering workforce can adequately provide assessment of nuclear systems and establish safety guidelines. Participation in the International Criticality Safety Benchmark Evaluation Project (ICSBEP) and the International Reactor Physics Experiment Evaluation Project (IRPhEP) can provide students and young professionals the opportunity to gain experience and enhance critical engineering skills. The ICSBEP and IRPhEP publish annual handbooks that contain evaluations of experiments along with summarized experimental data and peer-reviewed benchmark specifications to support the validation of neutronics codes, nuclear cross-section data, and the validation of reactor designs. Participation in the benchmark process not only benefits those who use these Handbooks within the international community, but provides the individual with opportunities for professional development, networking with an international community of experts, and valuable experience to be used in future employment. Traditionally students have participated in benchmarking activities via internships at national laboratories, universities, or companies involved with the ICSBEP and IRPhEP programs. Additional programs have been developed to facilitate the nuclear education of students while participating in the benchmark projects. These programs include coordination with the Center for Space Nuclear Research (CSNR) Next Degree Program, the Collaboration with the Department of Energy Idaho Operations Office to train nuclear and criticality safety engineers, and student evaluations as the basis for their Master's thesis in nuclear engineering.
Safety Training: Sensibilisation aux gestes et postures de travail

CERN Multimedia

Laetitia Laddada

2004-01-01

Nous vous proposons un nouveau cours de sécurité lié aux manutentions manuelles (durée 1 jour) : Sensibilisation aux gestes et postures de travail. Si vous êtes amené à manipuler régulièrement des charges lourdes ou volumineuses, cette formation peut vous aider à prévenir les lésions musculaires ou dorsales. A l'issue de cette formation, vous serez capable d'adopter et d'appliquer les principes de base de sécurité physique et d'économie d'efforts dans les manipulations d'objets. Les cours sont pris en charge par la Commission de Sécurité. L'inscription EDH est obligatoire. Pour plus d'information, veuillez consulter les pages Formation & Développement (Groupe Sécurité). Formation & Développement (Groupe Sécurité) FORMATION EN SECURITE SAFETY TRAINING Laetitia Laddada 73811 - 79236 sa...
YK1 Basic professional training course on nuclear safety, Finland

International Nuclear Information System (INIS)

Kyrki-Rajamaeki, R.

2005-01-01

In the fall of 2002, Finnish organizations re-evaluated the manpower situation and established an organizing committee to develop and organize basic post-graduate professional training of new recruits and staff members; especially for the acute needs of the new NPP project, but also to provide in the long-term a new generation of nuclear experts to replace the present generation which will retire within the next ten years. The organizing committee included representatives of the following organizations: Radiation and Nuclear Safety Authority STUK, nuclear power utilities TVO and Fortum, the Technical Research Centre of Finland VTT, the Lappeenranta and Helsinki Universities of Technology, LUT and HUT, respectively, and the Ministry of Trade and Industry, KTM. The committee decided to promptly organize a national training course on nuclear safety based on a similar course developed by the IAEA: the course structure and syllabus are alike. Although part of the course material is based on the IAEA material, it has been adapted to the Finnish conditions, and a large part of the material is completely new. The Finnish application was developed in order to make visible different standpoints of all organizations. The location of the first six-week course YK1 from September 2003 to February 2004 rotated between different organizations. There were altogether 120 lecturers and rehearsal, demonstration or excursion leaders. Half of them came from the utilities TVO and Fortum, a quarter from the authority STUK, and the rest from VTT, universities and others. The 51 participants of the course came from these same organisations. The lectures were held in Finnish, and the slides in Finnish were distributed to the participants. However, it is useful and even mandatory to know the terms also in English, and therefore the extended abstracts of the lectures were written in English. The YK1 course material was laid on the website of LUT to look for in advance or in more detail with
YK1 Basic professional training course on nuclear safety, Finland

International Nuclear Information System (INIS)

Kyrki-Rajamaeki, R.

2005-01-01

In the fall of 2002, Finnish organizations re-evaluated the manpower situation and established an organizing committee to develop and organize basic post-graduate professional training of new recruits and staff members; especially for the acute needs of the new NPP project, but also to provide in the long-term a new generation of nuclear experts to replace the present generation which will retire within the next ten years. The organizing committee included representatives of the following organizations: Radiation and Nuclear Safety Authority STUK, nuclear power utilities TVO and Fortum, the Technical Research Centre of Finland VTT, the Lappeenranta and Helsinki Universities of Technology, LUT and HUT, respectively, and the Ministry of Trade and Industry, KTM. The committee decided to promptly organize a national training course on nuclear safety based on a similar course developed by the IAEA: the course structure and syllabus are alike. Although part of the course material is based on the IAEA material, it has been adapted to the Finnish conditions, and a large part of the material is completely new. The Finnish application was developed in order to make visible different standpoints of all organizations. The location of the first six-week course YK1 from September 2003 to February 2004 rotated between different organizations. There were altogether 120 lecturers and rehearsal, demonstration or excursion leaders. Half of them came from the utilities TVO and Fortum, a quarter from the authority STUK, and the rest from VTT, universities and others. The 51 participants of the course came from these same organisations. The lectures were held in Finnish, and the slides in Finnish were distributed to the participants. However, it is useful and even mandatory to know the terms also in English, and therefore the extended abstracts of the lectures were written in English. The YK1 course material was laid on the website of LUT to look for in advance or in more detail with
Strength training and aerobic exercise training for muscle disease.

NARCIS (Netherlands)

Voet, N.B.M.; Kooi, E.L. van der; Riphagen, I.I.; Lindeman, E.; Engelen, B.G.M. van; Geurts, A.C.H.

2010-01-01

BACKGROUND: Strength training or aerobic exercise programmes might optimise muscle and cardiorespiratory function and prevent additional disuse atrophy and deconditioning in people with a muscle disease. OBJECTIVES: To examine the safety and efficacy of strength training and aerobic exercise
Safety of sports facilities and training of graduates in physical education.

Science.gov (United States)

Romano Spica, V; Giampaoli, S; Di Onofrio, V; Liguori, G

2015-01-01

Post-industrial societies have to face the problem of physical inactivity and inappropriate lifestyles. Programs to promote physical activity are strongly supported by supranational, national and local institutions and organizations. These programs can be developed in sport facilities but also in places that are not institutionally dedicated to sport. The use of urban and working sites has the advantage of better reach the various segments of the population, but at the same time requires coordination between various professionals in structuring an effective intervention. Bibliographical research in the historical archives of the library of the University of Rome Foro Italico, online databases, paleoigiene (wikigiene), documents archives (GSMS-SItI, WHO, ISS, OsEPi, INAIL, ISTAT, national laws). Several guidelines and regulations face the problem of safety in sport environments. The context is in rapid evolution and directions are provided by public health authorities. Graduates in Sport and Physical Activity, represent an additional resource in terms of: prevention and safety in the workplace, health education, application of preventive and adapted physical activities in the territory. These tasks can be integrated in all prevention stages: e.g. childhood and primary prevention programs in school, adapted physical activity for the elderly. The contribution of public health specialists is strategic in the surveillance and coordination of integrated projects. At the same time, graduates in Physical Education appear to be pivots for health promotion and qualified resources for institutions in the territory. Their training should always include contents related to prevention and safety, regulations on sport and working environments, along with bases of preventive medicine related to the context of physical activity.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.