Helping behavior in a virtual crisis situation: effects of safety awareness and crisis communication

NARCIS (Netherlands)

Stubbe, H.E.; van Emmerik, M.L.; Kerstholt, Johanna Helena

2017-01-01

Incident evaluations show that bystanders tend to help: they do not wait for professionals to arrive, but act as required by the situation at hand. In the present study, we investigated how safety awareness (induced before an accident happened) and providing a course of action by emergency services

Patient-reported safety incidents in older patients with long-term conditions: a large cross-sectional study.

Science.gov (United States)

Panagioti, Maria; Blakeman, Thomas; Hann, Mark; Bower, Peter

2017-05-30

Increasing evidence suggests that patient safety is a serious concern for older patients with long-term conditions. Despite this, there is a lack of research on safety incidents encountered by this patient group. In this study, we sought to examine patient reports of safety incidents and factors associated with reports of safety incidents in older patients with long-term conditions. The baseline cross-sectional data from a longitudinal cohort study were analysed. Older patients (n=3378 aged 65 years and over) with a long-term condition registered in general practices were included in the study. The main outcome was patient-reported safety incidents including availability and appropriateness of medical tests and prescription of wrong types or doses of medication. Binary univariate and multivariate logistic regression analyses were undertaken to examine factors associated with patient-reported safety incidents. Safety incidents were reported by 11% of the patients. Four factors were significantly associated with patient-reported safety incidents in multivariate analyses. The experience of multiple long-term conditions (OR=1.09, 95% CI 1.05 to 1.13), a probable diagnosis of depression (OR=1.36, 95% CI 1.06 to 1.74) and greater relational continuity of care (OR=1.28, 95% CI 1.08 to 1.52) were associated with increased odds for patient-reported safety incidents. Perceived greater support and involvement in self-management was associated with lower odds for patient-reported safety incidents (OR=0.95, 95% CI 0.93 to 0.97). We found that older patients with multimorbidity and depression are more likely to report experiences of patient safety incidents. Improving perceived support and involvement of patients in their care may help prevent patient-reported safety incidents. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Criticality safety assessment of FBTR fuel sub-assemblies using WIMS cross section set

International Nuclear Information System (INIS)

Gupta, H.C.; Chakraborty, B.

2002-01-01

Full text: FBTR's irradiated fuel sub-assemblies (FSAs) are sent to RML at Indira Gandhi Centre for Atomic Research for post irradiation examination. The FSAs are cut open and the fuel pins are separated for examination in the hot cells. It was required to evaluate the criticality safety in handling the FSAs in the hot cells. Criticality safety studies for handling two as well as three irradiated FSAs in the hot cells under dry conditions were carried out by the Safety Group at IGCAR, Kalpakkam. Monte Carlo code KENO (Version Va) which uses 16-group Hansen-Roach cross-section set was used for the calculations. Subsequently, during the safety review of the proposition by the Safety Review Committee (SARCOP) of AERB, it was stipulated to carry out the criticality safety studies under flooded condition also. We carried out the criticality safety studies for these fuel sub assemblies in different configurations under dry (buried in concrete) as well as wet condition (flooded with light water) using Monte Carlo codes MONALI (developed at BARC) and KENO4 using WlMS-69 group cross section set. Results of our analyses under various conditions are presented in this paper

Does the concept of safety culture help or hinder systems thinking in safety?

Science.gov (United States)

Reiman, Teemu; Rollenhagen, Carl

2014-07-01

The concept of safety culture has become established in safety management applications in all major safety-critical domains. The idea that safety culture somehow represents a "systemic view" on safety is seldom explicitly spoken out, but nevertheless seem to linger behind many safety culture discourses. However, in this paper we argue that the "new" contribution to safety management from safety culture never really became integrated with classical engineering principles and concepts. This integration would have been necessary for the development of a more genuine systems-oriented view on safety; e.g. a conception of safety in which human, technological, organisational and cultural factors are understood as mutually interacting elements. Without of this integration, researchers and the users of the various tools and methods associated with safety culture have sometimes fostered a belief that "safety culture" in fact represents such a systemic view about safety. This belief is, however, not backed up by theoretical or empirical evidence. It is true that safety culture, at least in some sense, represents a holistic term-a totality of factors that include human, organisational and technological aspects. However, the departure for such safety culture models is still human and organisational factors rather than technology (or safety) itself. The aim of this paper is to critically review the various uses of the concept of safety culture as representing a systemic view on safety. The article will take a look at the concepts of culture and safety culture based on previous studies, and outlines in more detail the theoretical challenges in safety culture as a systems concept. The paper also presents recommendations on how to make safety culture more systemic. Copyright © 2013 Elsevier Ltd. All rights reserved.

Tool for assistance in testing the safety logic section of nuclear plants

International Nuclear Information System (INIS)

Boulc'h, J.; Meur, M. le; Collart, J.M.; Segalard, J.; Uberschlag, J.

1986-01-01

The analysis of the protection system logic section (SPIN) of the PALUEL plant performed manually have led to the study of a logical tool for testing the safety logic section having or having not failures. It is a dynamic analyser which from a terminal in a sharing time system will be able to generate testing sequences, to simulate a processor and its environment and to analyse the logic sections with their workable code

Safety assessment and verification for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2004-01-01

This Safety Guide was prepared under the IAEA programme for safety standards for nuclear power plants. The present publication is a revision of the IAEA Safety Guide on Management of Nuclear Power Plants for Safe Operation issued in 1984. It supplements Section 2 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation. Nuclear power technology is different from the customary technology of power generation from fossil fuel and by hydroelectric means. One major difference between the management of nuclear power plants and that of conventional generating plants is the emphasis that should be placed on nuclear safety, quality assurance, the management of radioactive waste and radiological protection, and the accompanying national regulatory requirements. This Safety Guide highlights the important elements of effective management in relation to these aspects of safety. The attention to be paid to safety requires that the management recognize that personnel involved in the nuclear power programme should understand, respond effectively to, and continuously search for ways to enhance safety in the light of any additional requirements socially and legally demanded of nuclear energy. This will help to ensure that safety policies that result in the safe operation of nuclear power plants are implemented and that margins of safety are always maintained. The structure of the organization, management standards and administrative controls should be such that there is a high degree of assurance that safety policies and decisions are implemented, safety is continuously enhanced and a strong safety culture is promoted and supported. The objective of this publication is to guide Member States in setting up an operating organization which facilitates the safe operation of nuclear power plants to a high level internationally. The second objective is to provide guidance on the most important organizational elements in order to contribute to a strong safety

Safety assessment and verification for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2005-01-01

This Safety Guide was prepared under the IAEA programme for safety standards for nuclear power plants. The present publication is a revision of the IAEA Safety Guide on Management of Nuclear Power Plants for Safe Operation issued in 1984. It supplements Section 2 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation. Nuclear power technology is different from the customary technology of power generation from fossil fuel and by hydroelectric means. One major difference between the management of nuclear power plants and that of conventional generating plants is the emphasis that should be placed on nuclear safety, quality assurance, the management of radioactive waste and radiological protection, and the accompanying national regulatory requirements. This Safety Guide highlights the important elements of effective management in relation to these aspects of safety. The attention to be paid to safety requires that the management recognize that personnel involved in the nuclear power programme should understand, respond effectively to, and continuously search for ways to enhance safety in the light of any additional requirements socially and legally demanded of nuclear energy. This will help to ensure that safety policies that result in the safe operation of nuclear power plants are implemented and that margins of safety are always maintained. The structure of the organization, management standards and administrative controls should be such that there is a high degree of assurance that safety policies and decisions are implemented, safety is continuously enhanced and a strong safety culture is promoted and supported. The objective of this publication is to guide Member States in setting up an operating organization which facilitates the safe operation of nuclear power plants to a high level internationally. The second objective is to provide guidance on the most important organizational elements in order to contribute to a strong safety

Radiological Emergency Response Health and Safety Manual

Energy Technology Data Exchange (ETDEWEB)

D. R. Bowman

2001-05-01

This manual was created to provide health and safety (H&S) guidance for emergency response operations. The manual is organized in sections that define each aspect of H and S Management for emergency responses. The sections are as follows: Responsibilities; Health Physics; Industrial Hygiene; Safety; Environmental Compliance; Medical; and Record Maintenance. Each section gives guidance on the types of training expected for managers and responders, safety processes and procedures to be followed when performing work, and what is expected of managers and participants. Also included are generic forms that will be used to facilitate or document activities during an emergency response. These ensure consistency in creating useful real-time and archival records and help to prevent the loss or omission of information.

16 CFR 1500.88 - Exemptions from lead limits under section 101 of the Consumer Product Safety Improvement Act for...

Science.gov (United States)

2010-01-01

... 101 of the Consumer Product Safety Improvement Act for certain electronic devices. 1500.88 Section... from lead limits under section 101 of the Consumer Product Safety Improvement Act for certain electronic devices. (a) The Consumer Product Safety Improvement Act (CPSIA) provides for specific lead limits...

IAEA Assistance in Helping Member States Develop Effectively Independent and Robust Regulators for Nuclear Installation Safety

Energy Technology Data Exchange (ETDEWEB)

Nicic, A., E-mail: A.Nicic@iaea.org [International Atomic Energy Agency (IAEA), Department of Nuclear Safety and Security, Wagramer Strasse 5, P.O. Box 100, 1400 Vienna (Austria)

2014-10-15

Full text: The International Conference on Topical Issues in Nuclear Installation Safety will be focused on the exchange of information on the latest thinking and advances in the implementation of the concept of Defence-in-Depth (DID) in nuclear installations, and the associated challenges. The focus will be on operating nuclear installations, including nuclear power plants, research reactors and fuel cycle facilities, and on how lessons learned from operating experience and recent events (e.g. the Fukushima Daiichi accident) are used to enhance safety. The implementation of DID covers a number of elements that are directly related to the different states and phases of a nuclear facility. This presentation will discuss the importance of the regulatory body in its oversight role as a cross-cutting element of DID in helping to assure the safety of nuclear installations. Taking note of the numerous challenges in developing an effectively independent and robust regulatory body, the presentation will describe how the IAEA assists Member States in their development of the appropriate regulatory infrastructure and necessary capacity to carry out their regulatory responsibilities – consistent with the IAEA Safety Standards. The presentation will describe the importance of the self-assessment process which serves as a starting point for helping Member States gain an understanding of what support they need and when the support should be provided as they develop into a competent regulatory authority. The presentation will discuss recent improvements in the self-assessment process and related IAEA services in this regard. Once regulatory bodies are established, it is essential that they seek continuous improvement. In this regard, the presentation will describe the IAEA’s assistance provided through the Integrated Regulatory Review Service (IRRS) and recent activities to improve the IRRS, consistent with the IAEA’s Action Plan on Nuclear Safety. (author)

Patient safety culture in out-of-hours primary care services in the Netherlands: a cross-sectional survey.

NARCIS (Netherlands)

Smits, M.; Keizer, E.; Giesen, P.; Deilkas, E.C.T.; Hofoss, D.; Bondevik, G.T

2018-01-01

Objective: To examine patient safety culture in Dutch out-of-hours primary care using the safety attitudes questionnaire (SAQ) which includes five factors: teamwork climate, safety climate, job satisfaction, perceptions of management and communication openness. Design: Cross-sectional observational

Graphs of neutron cross sections in JSD1000 for radiation shielding safety analysis

International Nuclear Information System (INIS)

Yamano, Naoki

1984-03-01

Graphs of neutron cross sections and self-shielding factors in the JSD1000 library are presented for radiation shielding safety analysis. The compilation contains various reaction cross sections for 42 nuclides from 1 H to 241 Am in the energy range from 3.51 x 10 -4 eV to 16.5 MeV. The Bondarenko-type self-shielding factors of each reaction are given by the background cross sections from σ 0 = 0 to σ 0 = 10000. (author)

78 FR 49988 - Food and Drug Administration Food Safety Modernization Act: Proposed Rules on Foreign Supplier...

Science.gov (United States)

2013-08-16

... help manage the safety of their global food supply chains. The purpose of the public meeting is to... electronic or written comments to FDA's Division of Dockets Management. ADDRESSES: See section II, ``How to... protect public health by helping to ensure the safety and security of the food supply. FSMA amends the...

Patients for patient safety in China: a cross sectional study.

Science.gov (United States)

Zhang, Qiongwen; Li, Yulin; Li, Jing; Mao, Xuanyue; Zhang, Lijuan; Ying, Qinghua; Wei, Xin; Shang, Lili; Zhang, Mingming

2012-02-01

To investigate the baseline status of patients' awareness, knowledge, and attitudes to patient safety in China, and to determine the factors that influence patients' involvement in patient safety. We conducted a cross sectional survey using questionnaires adapted from recent studies on patient safety from outside China. The items included medical errors, infection, medication safety, and other aspects of patient safety. The questionnaire included 17 items and 5 domains. The survey was conducted between Jan. 2009 and Dec. 2010 involving 1000 patients from ten grade-A hospitals in seven provinces or cities in China. Most patients from the surgery departments completed the questionnaires voluntarily and anonymously. Five reviewers independently input the data into Microsoft Excel 2003, and the data were double-checked. Data were analyzed using SPSS 15.0 software for differences in the perceptions and attitudes of patients toward patient safety among different genders, ages, and regions. We distributed 1000 questionnaires and collected 959 completed questionnaires (response rate: 96%). Among the respondents, 58% of patients did not know what medical error is. Sixty-five percent of patients wanted disclosure of all medical errors. After errors occurred, 58% of patients wanted explanations of all possible harms that had resulted. Among 187 patients who had experienced medical errors, 83% of patients had sought appropriate legal action. About 52% of patients understood hospital infection, but 28% patients did not know that infections could occur in hospital. Seventy-eight percent of patients thought that medical staff should wash their hands before examining patients. More than half of the patients (68%) were willing to remind the staff of hygiene if they saw unsanitary conditions in a health clinic. Only 14% of patients knew the side effects of medications that they took. The majority of patients surveyed expressed willingness to contribute to patient safety, but their

Methodology for safety optimization of highway cross-sections for horizontal curves with restricted sight distance.

Science.gov (United States)

Ibrahim, Shewkar E; Sayed, Tarek; Ismail, Karim

2012-11-01

Several earlier studies have noted the shortcomings with existing geometric design guides which provide deterministic standards. In these standards the safety margin of the design output is generally unknown and there is little knowledge of the safety implications of deviating from the standards. To mitigate these shortcomings, probabilistic geometric design has been advocated where reliability analysis can be used to account for the uncertainty in the design parameters and to provide a mechanism for risk measurement to evaluate the safety impact of deviations from design standards. This paper applies reliability analysis for optimizing the safety of highway cross-sections. The paper presents an original methodology to select a suitable combination of cross-section elements with restricted sight distance to result in reduced collisions and consistent risk levels. The purpose of this optimization method is to provide designers with a proactive approach to the design of cross-section elements in order to (i) minimize the risk associated with restricted sight distance, (ii) balance the risk across the two carriageways of the highway, and (iii) reduce the expected collision frequency. A case study involving nine cross-sections that are parts of two major highway developments in British Columbia, Canada, was presented. The results showed that an additional reduction in collisions can be realized by incorporating the reliability component, P(nc) (denoting the probability of non-compliance), in the optimization process. The proposed approach results in reduced and consistent risk levels for both travel directions in addition to further collision reductions. Copyright © 2012 Elsevier Ltd. All rights reserved.

Public perception of drinking water safety in South Africa 2002-2009: a repeated cross-sectional study.

Science.gov (United States)

Wright, Jim A; Yang, Hong; Rivett, Ulrike; Gundry, Stephen W

2012-07-27

In low and middle income countries, public perceptions of drinking water safety are relevant to promotion of household water treatment and to household choices over drinking water sources. However, most studies of this topic have been cross-sectional and not considered temporal variation in drinking water safety perceptions. The objective of this study is to explore trends in perceived drinking water safety in South Africa and its association with disease outbreaks, water supply and household characteristics. This repeated cross-sectional study draws on General Household Surveys from 2002-2009, a series of annual nationally representative surveys of South African households, which include a question about perceived drinking water safety. Trends in responses to this question were examined from 2002-2009 in relation to reported cholera cases. The relationship between perceived drinking water safety and organoleptic qualities of drinking water, supply characteristics, and socio-economic and demographic household characteristics was explored in 2002 and 2008 using hierarchical stepwise logistic regression. The results suggest that perceived drinking water safety has remained relatively stable over time in South Africa, once the expansion of improved supplies is controlled for. A large cholera outbreak in 2000-02 had no apparent effect on public perception of drinking water safety in 2002. Perceived drinking water safety is primarily related to water taste, odour, and clarity rather than socio-economic or demographic characteristics. This suggests that household perceptions of drinking water safety in South Africa follow similar patterns to those observed in studies in developed countries. The stability over time in public perception of drinking water safety is particularly surprising, given the large cholera outbreak that took place at the start of this period.

Who was concerned about radiation, food safety, and natural disasters after the great East Japan earthquake and Fukushima catastrophe? A nationwide cross-sectional survey in 2012.

Science.gov (United States)

Sugimoto, Takashi; Shinozaki, Tomohiro; Naruse, Takashi; Miyamoto, Yuki

2014-01-01

Disaster-related concerns by sub-populations have not been clarified after the great East Japan earthquake and the Fukushima nuclear power plant incidents. This paper assesses who was concerned about radiation, food safety, and natural disasters among the general population in order to buffer such concerns effectively. The hypothesis that women, parents, and family caregivers were most concerned about radiation, food safety, and natural disaster was tested using a varying-intercept multivariable logistic regression with 5809 responses from a nationwide cross-sectional survey random-sampled in March 2012. Many people were at least occasionally concerned about radiation (53.5%), food safety (47.3%), and about natural disaster (69.5%). Women were more concerned than men about radiation (OR = 1.67; 95% CI = 1.35-2.06), food safety (1.70; 1.38-2.10), and natural disasters (1.74; 1.39-2.19). Parents and family care needs were not significant. Married couples were more concerned about radiation (1.53; 1.33-1.77), food safety (1.38; 1.20-1.59), and natural disasters (1.30; 1.12-1.52). Age, child-cohabitation, college-completion, retirement status, homemaker status, and the house-damage certificate of the last disaster were also associated with at least one concern. Participants from the Kanto region were more concerned about radiation (2.08; 1.58-2.74) and food safety (1.30; 1.07-1.59), which demonstrate similar positive associations to participants from Tohoku where a disaster relief act was invoked (3.36; 2.25-5.01 about radiation, 1.49; 1.08-2.06 about food safety). Sectioning the populations by gender and other demographics will clarify prospective targets for interventions, allow for a better understanding of post-disaster concerns, and help communicate relevant information effectively.

Who was concerned about radiation, food safety, and natural disasters after the great East Japan earthquake and Fukushima catastrophe? A nationwide cross-sectional survey in 2012.

Directory of Open Access Journals (Sweden)

Takashi Sugimoto

Full Text Available BACKGROUND: Disaster-related concerns by sub-populations have not been clarified after the great East Japan earthquake and the Fukushima nuclear power plant incidents. This paper assesses who was concerned about radiation, food safety, and natural disasters among the general population in order to buffer such concerns effectively. METHODS: The hypothesis that women, parents, and family caregivers were most concerned about radiation, food safety, and natural disaster was tested using a varying-intercept multivariable logistic regression with 5809 responses from a nationwide cross-sectional survey random-sampled in March 2012. RESULTS: Many people were at least occasionally concerned about radiation (53.5%, food safety (47.3%, and about natural disaster (69.5%. Women were more concerned than men about radiation (OR = 1.67; 95% CI = 1.35-2.06, food safety (1.70; 1.38-2.10, and natural disasters (1.74; 1.39-2.19. Parents and family care needs were not significant. Married couples were more concerned about radiation (1.53; 1.33-1.77, food safety (1.38; 1.20-1.59, and natural disasters (1.30; 1.12-1.52. Age, child-cohabitation, college-completion, retirement status, homemaker status, and the house-damage certificate of the last disaster were also associated with at least one concern. Participants from the Kanto region were more concerned about radiation (2.08; 1.58-2.74 and food safety (1.30; 1.07-1.59, which demonstrate similar positive associations to participants from Tohoku where a disaster relief act was invoked (3.36; 2.25-5.01 about radiation, 1.49; 1.08-2.06 about food safety. CONCLUSIONS: Sectioning the populations by gender and other demographics will clarify prospective targets for interventions, allow for a better understanding of post-disaster concerns, and help communicate relevant information effectively.

Research section on optimization of nuclear safety regulation. Summary of research section

International Nuclear Information System (INIS)

Madarame, Haruki

2009-01-01

In order to make the inspection of nuclear facilities more effective, mutual understanding and respect between the regulatory body and the licensees, and a frank, open and yet formal relationship, shall be fostered. Thus the Research Section on Optimization of Nuclear Safety Regulation was established at JSME in 2005, where academic, regulatory and industrial members have frankly discussed for the improvement of inspection system. Agreed on the necessity of system renovation, the optimal inspection system was discussed. Suitable plant shutdown interval for the preventive maintenance was evaluated considering the current monitoring technique. At the same time, the U.S. and European inspection systems were reviewed to learn a lesson. The useful conclusion were published so that each member makes efforts for the effective inspection system. Some of the results have already been referred by the governmental task force on the inspection system improvement, and contributed to the system renovation. (author)

Patients' evaluations of patient safety in English general practices: a cross-sectional study.

Science.gov (United States)

Ricci-Cabello, Ignacio; Marsden, Kate S; Avery, Anthony J; Bell, Brian G; Kadam, Umesh T; Reeves, David; Slight, Sarah P; Perryman, Katherine; Barnett, Jane; Litchfield, Ian; Thomas, Sally; Campbell, Stephen M; Doos, Lucy; Esmail, Aneez; Valderas, Jose M

2017-07-01

Description of safety problems and harm in general practices has previously relied on information from health professionals, with scarce attention paid to experiences of patients. To examine patient-reported experiences and outcomes of patient safety in primary care. Cross-sectional study in 45 general practices across five regions in the north, centre, and south of England. A version of the Patient Reported Experiences and Outcomes of Safety in Primary Care (PREOS-PC) questionnaire was sent to a random sample of 6736 patients. Main outcome measures included 'practice activation' (what a practice does to create a safe environment); 'patient activation' (how proactive are patients in ensuring safe healthcare delivery); 'experiences of safety events' (safety errors); 'outcomes of safety' (harm); and 'overall perception of safety' (how safe patients rate their practice). Questionnaires were returned by 1244 patients (18.4%). Scores were high for 'practice activation' (mean [standard error] = 80.4 out of 100 [2.0]) and low for 'patient activation' (26.3 out of 100 [2.6]). Of the patients, 45% reported experiencing at least one safety problem in the previous 12 months, mostly related to appointments (33%), diagnosis (17%), patient provider communication (15%), and coordination between providers (14%). Twenty-three per cent of the responders reported some degree of harm in the previous 12 months. The overall assessment of level of safety of practices was generally high (86.0 out of 100 [16.8]). Priority areas for patient safety improvement in general practices in England include appointments, diagnosis, communication, coordination, and patient activation. © British Journal of General Practice 2017.

SCALE system cross-section validation for criticality safety analysis

International Nuclear Information System (INIS)

Hathout, A.M.; Westfall, R.M.; Dodds, H.L. Jr.

1980-01-01

The purpose of this study is to test selected data from three cross-section libraries for use in the criticality safety analysis of UO 2 fuel rod lattices. The libraries, which are distributed with the SCALE system, are used to analyze potential criticality problems which could arise in the industrial fuel cycle for PWR and BWR reactors. Fuel lattice criticality problems could occur in pool storage, dry storage with accidental moderation, shearing and dissolution of irradiated elements, and in fuel transport and storage due to inadequate packing and shipping cask design. The data were tested by using the SCALE system to analyze 25 recently performed critical experiments

The use of GIS tools for road infrastructure safety management

Science.gov (United States)

Budzyński, Marcin; Kustra, Wojciech; Okraszewska, Romanika; Jamroz, Kazimierz; Pyrchla, Jerzy

2018-01-01

There are many factors that influence accidents and their severity. They can be grouped within the system of man, vehicle and environment. The article focuses on how GIS tools can be used to manage road infrastructure safety. To ensure a better understanding and identification of road factors, GIS tools help with the acquisition of road parameter data. Their other role is helping with a clear and effective presentation of risk ranking. GIS is key to identifying high-risk sections and supports the effective communication of safety levels. This makes it a vital element of safety management. The article describes the use of GIS for the collection and visualisation of road parameter data which are not available in any of the existing databases, i.e. horizontal curve parameters. As we know from research and statistics, they are important factors that determine the safety of road infrastructure. Finally, new research is proposed as well as the possibilities for applying GIS tools for the purposes of road safety inspection.

C4P cross-section libraries for safety analyses with SIMMER and related studies

International Nuclear Information System (INIS)

Rineiski, A.; Sinitsa, V.; Gabrielli, F.; Maschek, W.

2011-01-01

A code and data system, C 4 P, is under development at KIT. It includes fine-group master libraries and tools for generating problem-oriented cross-section libraries, primarily for safety studies with the SIMMER code and related analyses. In the paper, the 560-group master library and problem oriented 40-group and 72-group cross-section libraries, for thermal and fast systems, respectively, are described and their performances are investigated. (author)

Behavioral integrity for safety, priority of safety, psychological safety, and patient safety : a team-level study

NARCIS (Netherlands)

Leroy, H.; Dierynck, B.; Anseel, F.; Simons, T.; Halbesleben, J.R.; McCaughey, D.; Savage, G.T.; Sels, L.

2012-01-01

This article clarifies how leader behavioral integrity for safety helps solve follower's double bind between adhering to safety protocols and speaking up about mistakes against protocols. Path modeling of survey data in 54 nursing teams showed that head nurse behavioral integrity for safety

Opportunities for health and safety professionals in environmental restoration work

International Nuclear Information System (INIS)

Norris, A.E.

1991-01-01

The safety of workers in waste management and in environmental restoration work is regulated in large part by the Occupational Safety and Health Administration (OSHA). Many of the OSHA rules are given in Part 1910, Occupational Safety and Health Standards, of Title 29 of the Code of Federal Regulations (CFR). Section 120 of 29 CFR 1910 specifically addresses hazardous waste operations and emergency response operations. The remainder of this discussion focuses on clean-up operations. The purpose of this paper is to review areas of employment opportunity in environmental restoration work for health and safety professionals. Safety and health risk analyses are mentioned as one area of opportunity, and these analyses are required by the standards. Site safety and health supervisors will be needed during field operations. Those who enjoy teaching might consider helping to meet the training needs that are mandated. Finally, engineering help both to separate workers from hazards and to improve personal protective equipment, when it must be worn, would benefit those actively involved in environmental restoration activities

Changes in patient safety culture after restructuring of intensive care units: Two cross-sectional studies.

Science.gov (United States)

Vifladt, Anne; Simonsen, Bjoerg O; Lydersen, Stian; Farup, Per G

2016-02-01

Compare changes in registered nurses' perception of the patient safety culture in restructured and not restructured intensive care units during a four-year period. Two cross-sectional surveys were performed, in 2008/2009 (time 1) and 2012/2013 (time 2). During a period of 0-3 years after time 1, three of six hospitals merged their general and medical intensive care units (restructured). The other hospitals maintained their structure of the intensive care units (not restructured). Intensive care units in hospitals at one Norwegian hospital trust. The safety culture was measured with Hospital Survey on Patient Safety Culture. At times 1 and 2, 217/302 (72%) and 145/289 (50%) registered nurses participated. Restructuring was negatively associated with change in the safety culture, in particular, the dimensions of the safety culture within the unit level. The dimensions most vulnerable for restructuring were manager expectations and actions promoting safety, teamwork within hospital units and staffing. In this study, the restructuring of intensive care units was associated with a negative impact on the safety culture. When restructuring, the management should be particularly aware of changes in the safety culture dimensions manager expectations and actions promoting safety, teamwork within hospital units and staffing. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Public perception of drinking water safety in South Africa 2002–2009: a repeated cross-sectional study

Science.gov (United States)

2012-01-01

Background In low and middle income countries, public perceptions of drinking water safety are relevant to promotion of household water treatment and to household choices over drinking water sources. However, most studies of this topic have been cross-sectional and not considered temporal variation in drinking water safety perceptions. The objective of this study is to explore trends in perceived drinking water safety in South Africa and its association with disease outbreaks, water supply and household characteristics. Methods This repeated cross-sectional study draws on General Household Surveys from 2002–2009, a series of annual nationally representative surveys of South African households, which include a question about perceived drinking water safety. Trends in responses to this question were examined from 2002–2009 in relation to reported cholera cases. The relationship between perceived drinking water safety and organoleptic qualities of drinking water, supply characteristics, and socio-economic and demographic household characteristics was explored in 2002 and 2008 using hierarchical stepwise logistic regression. Results The results suggest that perceived drinking water safety has remained relatively stable over time in South Africa, once the expansion of improved supplies is controlled for. A large cholera outbreak in 2000–02 had no apparent effect on public perception of drinking water safety in 2002. Perceived drinking water safety is primarily related to water taste, odour, and clarity rather than socio-economic or demographic characteristics. Conclusion This suggests that household perceptions of drinking water safety in South Africa follow similar patterns to those observed in studies in developed countries. The stability over time in public perception of drinking water safety is particularly surprising, given the large cholera outbreak that took place at the start of this period. PMID:22834485

Public perception of drinking water safety in South Africa 2002–2009: a repeated cross-sectional study

Directory of Open Access Journals (Sweden)

Wright Jim A

2012-07-01

Full Text Available Abstract Background In low and middle income countries, public perceptions of drinking water safety are relevant to promotion of household water treatment and to household choices over drinking water sources. However, most studies of this topic have been cross-sectional and not considered temporal variation in drinking water safety perceptions. The objective of this study is to explore trends in perceived drinking water safety in South Africa and its association with disease outbreaks, water supply and household characteristics. Methods This repeated cross-sectional study draws on General Household Surveys from 2002–2009, a series of annual nationally representative surveys of South African households, which include a question about perceived drinking water safety. Trends in responses to this question were examined from 2002–2009 in relation to reported cholera cases. The relationship between perceived drinking water safety and organoleptic qualities of drinking water, supply characteristics, and socio-economic and demographic household characteristics was explored in 2002 and 2008 using hierarchical stepwise logistic regression. Results The results suggest that perceived drinking water safety has remained relatively stable over time in South Africa, once the expansion of improved supplies is controlled for. A large cholera outbreak in 2000–02 had no apparent effect on public perception of drinking water safety in 2002. Perceived drinking water safety is primarily related to water taste, odour, and clarity rather than socio-economic or demographic characteristics. Conclusion This suggests that household perceptions of drinking water safety in South Africa follow similar patterns to those observed in studies in developed countries. The stability over time in public perception of drinking water safety is particularly surprising, given the large cholera outbreak that took place at the start of this period.

Neonatal Safety of Elective Family-Centered Caesarean Sections: A Cohort Study

Directory of Open Access Journals (Sweden)

Ilona C. Narayen

2018-02-01

Full Text Available BackgroundAlthough little data are available concerning safety for newborns, family-centered caesarean sections (FCS are increasingly implemented. With FCS mothers can see the delivery of their baby, followed by direct skin-to-skin contact. We evaluated the safety for newborns born with FCS in the Leiden University Medical Center (LUMC, where FCS was implemented in June 2014 for singleton pregnancies with a gestational age (GA ≥38 weeks and without increased risks for respiratory morbidity.MethodsThe incidence of respiratory pathology, unplanned admission, and hypothermia in infants born after FCS in LUMC were retrospectively reviewed and compared with a historical cohort of standard elective cesarean sections (CS.ResultsFrom June 2014 to November 2015, 92 FCS were performed and compared to 71 standard CS in 2013. Incidence of respiratory morbidity, hypothermia, temperatures at arrival at the department, GA, and birth weight were comparable (ns. Unplanned admission occurred more often after FCS when compared to standard CS (21 vs 7%; p = 0.03, probably due to peripheral oxygen saturation (SpO2 monitoring. There was no increase in respiratory pathology (8 vs 6%, ns. One-third of the babies were separated from their mother during or after FCS.ConclusionUnplanned neonatal admissions after elective CS increased after implementing FCS, without an increase in respiratory morbidity or hypothermia. SpO2 monitoring might have a contribution. Separation from the mother occurred often.

Meteorology/Oceanography Help - Naval Oceanography Portal

Science.gov (United States)

section Advanced Search... Sections Home Time Earth Orientation Astronomy Meteorology Oceanography Ice You are here: Home › Help › Meteorology/Oceanography Help USNO Logo USNO Info Meteorology/Oceanography Help Send an e-mail regarding meteorology or oceanography products. Privacy Advisory Your E-Mail

Exploring the relationship between quality of management and safety climate in a large scale Danish cross‐sectional study

DEFF Research Database (Denmark)

Sønderstrup-Andersen, Hans H. K.; Carlsen, Kathrine; Kines, Pete

2011-01-01

. In addition, we consider the impact of age, gender, education, job type and seniority as well as company size and industrial sector on the rating of safety climate. Predictors of safety climate ratings are analysed by use of multiple regression analysis. Our results show that the leadership style measured...... and transformational leadership and safety climate, and to explore how safety climate is affected by a number of socio-demographic factors and within different industries and company sizes. The analyses are based on data from a recent Danish work environment cross-sectional study including 3681 employees from a wide...... range of industries and who report that safety climate is relevant for their job. We use two safety climate items, (one regarding management safety empowerment; one regarding co-workers’ safety priority), one question about transactional leadership and two scales concerning transformational leadership...

Cancer symptom awareness and barriers to medical help seeking in Scottish adolescents: a cross-sectional study.

Science.gov (United States)

Hubbard, Gill; Macmillan, Iona; Canny, Anne; Forbat, Liz; Neal, Richard D; O'Carroll, Ronan E; Haw, Sally; Kyle, Richard G

2014-10-29

Initiatives to promote early diagnosis include raising public awareness of signs and symptoms of cancer and addressing barriers to seeking medical help about cancer. Awareness of signs and symptoms of cancer and emotional barriers, such as fear, worry, and embarrassment, strongly influence help seeking behaviour. Whether anxiety influences seeking medical help about cancer is not known. The purpose of this study about adolescents was to examine: 1) the relationship between contextual factors and awareness of signs and symptoms of cancer and barriers (including emotional barriers) to seeking medical help, and 2) associations between anxiety and endorsed barriers to seeking medical help. Interpretation of data is informed by the common sense model of the self-regulation of health and illness. A cross-sectional study of 2,173 Scottish adolescents (age 12/13 years) using the Cancer Awareness Measure. Socio-demographic questions were also included. Descriptive statistics were calculated and two Poisson regression models were built to determine independent predictors of: 1) the number of cancer warning signs recognized, and; 2) number of barriers to help seeking endorsed. Analysis identified that knowing someone with cancer was a significant independent predictor of recognising more cancer warning signs whereas Black and Minority Ethnic status was a significant independent predictor of recognising fewer cancer warning signs. Emotional barriers were the most commonly endorsed, followed by family, service and practical barriers. Over two thirds of adolescents were 'worried about what the doctor would find' and over half were 'scared'. Higher anxiety scores, knowing more cancer warning signs and female gender were significant independent predictors of barriers to help seeking. Improving cancer awareness and help seeking behaviour during adolescence may contribute to early presentation. Contextual factors (for example, ethnicity, gender, knowing someone with cancer), and

Factors associated with help-seeking behaviors in Mexican older individuals with depressive symptoms: a cross-sectional study.

Science.gov (United States)

Pérez-Zepeda, Mario Ulises; Arango-Lopera, Victoria Eugenia; Wagner, Fernando A; Gallo, Joseph J; Sánchez-García, Sergio; Juárez-Cedillo, Teresa; García-Peña, Carmen

2013-12-01

Depression in the older individuals is associated with multiple adverse outcomes, such as high health service utilization rates, low pharmacological compliance, and synergistic interactions with other comorbidities. Moreover, the help-seeking process, which usually starts with the feeling "that something is wrong" and ends with appropriate medical care, is influenced by several factors. The aim of this study was to explore factors associated with the pathway of help seeking among older adults with depressive symptoms. A cross-sectional study of 60-year or older community dwelling individuals belonging to the largest health and social security system in Mexico was carried out. A standardized interview explored the process of seeking health care in four dimensions: depressive symptoms, help seeking, help acquisition, and specialized mental health. A total of 2322 individuals were studied; from these, 67.14% (n = 1559) were women, and the mean age was 73.18 years (SD = 7.02); 57.9% had symptoms of depression; 337 (25.1%) participants sought help, and 271 (80.4%) received help; and 103 (38%) received specialized mental health care. In the stepwise model for not seeking help (χ(2) = 81.66, p depression is not a disease belief were also significant. Appropriate mental health care is rather complex and is influenced by several factors. The main factors associated with help seeking were gender, education level, recent health service use, and the belief that depression is not a disease. Detection of subjects with these characteristics could improve care of the older individuals with depressive symptoms. Copyright © 2013 John Wiley & Sons, Ltd.

Factors associated with help-seeking behaviors in Mexican elderly individuals with depressive symptoms: a cross-sectional study

Science.gov (United States)

Pérez-Zepeda, Mario Ulises; Arango-Lopera, Victoria Eugenia; Wagner, Fernando A.; Gallo, Joseph J.; Sánchez-García, Sergio; Juárez-Cedillo, Teresa; García-Peña, Carmen

2013-01-01

Objective Depression in the elderly is associated with multiple adverse outcomes, such as high health service utilization rates, low pharmacological compliance, and synergistic interactions with other comorbidities. Moreover, the help seeking process, which usually starts with the feeling “that something is wrong” and ends with appropriate medical care, is influenced by several factors. The aim of this study was to explore factors associated with the pathway of help seeking among older adults with depressive symptoms. Methods A cross-sectional study of 60-year or older of community dwelling elderly belonging to the largest health and social security system in Mexico was done. A standardized interview explored the process of seeking health care in four dimensions: depressive symptoms, help seeking, help acquisition and specialized mental health. Results A total of 2,322 individuals were studied; from these, 67.14% (n=1,559) were women, and the mean age was 73.18 years (SD=7.02) 57.9% had symptoms of depression, 337 (25.1%) participants sought help, and 271 (80.4%) received help and 103 (38%) received specialized mental health care. In the stepwise model for not seeking help (χ2=81.66, pdepression as a disease belief were also significant. Conclusions Appropriate mental health care is rather complex and is influenced by several factors. The main factors associated with help seeking were gender, education level, recent health service use, and the belief that depression is not a disease. Detection of subjects with these characteristics could improve care of elderly with depressive symptoms. PMID:23585359

Therapeutic results and safety of postoperative radiotherapy for keloid after repeated Cesarean section in immediate postpartum period

International Nuclear Information System (INIS)

Kim Ju Ree; Lee, Sang Hoon

2012-01-01

To evaluate the effectiveness and safety of postoperative radiotherapy for the treatment of keloid scars administered immediately after Cesarean section. A total of 26 postpartum patients with confirmed keloids resulting from previous Cesarean sections received either 12 or 15 Gy radiotherapy. The radiotherapy was divided into three 6 MeV electron beam fractions administered during the postpartum period immediately following the fi nal Cesarean section. To evaluate ovarian safety, designated doses of radiation were estimated at the calculated depth of the ovaries using a solid plate phantom and an ionization chamber with the same lead cutout as was used for the treatment of Cesarean section operative scars and a tissue equivalent bolus. In total, the control rate was 77% (20 patients), while six (23%) developed focally elevated keloids (ranging from 0.5 to 2 cm in length) in the middle of the primary abdominal scar. Five patients experienced mild hyperpigmentation. Nonetheless, most patients (96%) were satisfied with the treatment results. The estimated percentage of the applied radiation doses that reached the calculated depth of the ovaries ranged from 0.0033% to 0.0062%. When administered during the immediate postpartum period, postoperative electron beam radiotherapy for repeated Cesarean section scars is generally safe and produces good cosmetic results with minimal toxicity.

Therapeutic results and safety of postoperative radiotherapy for keloid after repeated Cesarean section in immediate postpartum period

Energy Technology Data Exchange (ETDEWEB)

Kim Ju Ree; Lee, Sang Hoon [Cheil General Hospital and Women' s Healthcare Center, Kwandong University College of Medicine, Seoul (Korea, Republic of)

2012-06-15

To evaluate the effectiveness and safety of postoperative radiotherapy for the treatment of keloid scars administered immediately after Cesarean section. A total of 26 postpartum patients with confirmed keloids resulting from previous Cesarean sections received either 12 or 15 Gy radiotherapy. The radiotherapy was divided into three 6 MeV electron beam fractions administered during the postpartum period immediately following the fi nal Cesarean section. To evaluate ovarian safety, designated doses of radiation were estimated at the calculated depth of the ovaries using a solid plate phantom and an ionization chamber with the same lead cutout as was used for the treatment of Cesarean section operative scars and a tissue equivalent bolus. In total, the control rate was 77% (20 patients), while six (23%) developed focally elevated keloids (ranging from 0.5 to 2 cm in length) in the middle of the primary abdominal scar. Five patients experienced mild hyperpigmentation. Nonetheless, most patients (96%) were satisfied with the treatment results. The estimated percentage of the applied radiation doses that reached the calculated depth of the ovaries ranged from 0.0033% to 0.0062%. When administered during the immediate postpartum period, postoperative electron beam radiotherapy for repeated Cesarean section scars is generally safe and produces good cosmetic results with minimal toxicity.

The operating organization for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2001-01-01

This Safety Guide was prepared under the IAEA programme for safety standards for nuclear power plants. The present publication is a revision of the IAEA Safety Guide on Management of Nuclear Power Plants for Safe Operation issued in 1984. It supplements Section 2 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation. Nuclear power technology is different from the customary technology of power generation from fossil fuel and by hydroelectric means. One major difference between the management of nuclear power plants and that of conventional generating plants is the emphasis that should be placed on nuclear safety, quality assurance, the management of radioactive waste and radiological protection, and the accompanying national regulatory requirements. This Safety Guide highlights the important elements of effective management in relation to these aspects of safety. The attention to be paid to safety requires that the management recognize that personnel involved in the nuclear power programme should understand, respond effectively to, and continuously search for ways to enhance safety in the light of any additional requirements socially and legally demanded of nuclear energy. This will help to ensure that safety policies that result in the safe operation of nuclear power plants are implemented and that margins of safety are always maintained. The structure of the organization, management standards and administrative controls should be such that there is a high degree of assurance that safety policies and decisions are implemented, safety is continuously enhanced and a strong safety culture is promoted and supported. The objective of this publication is to guide Member States in setting up an operating organization which facilitates the safe operation of nuclear power plants to a high level internationally. The second objective is to provide guidance on the most important organizational elements in order to contribute to a strong safety

The operating organization for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2005-01-01

This Safety Guide was prepared under the IAEA programme for safety standards for nuclear power plants. The present publication is a revision of the IAEA Safety Guide on Management of Nuclear Power Plants for Safe Operation issued in 1984. It supplements Section 2 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation. Nuclear power technology is different from the customary technology of power generation from fossil fuel and by hydroelectric means. One major difference between the management of nuclear power plants and that of conventional generating plants is the emphasis that should be placed on nuclear safety, quality assurance, the management of radioactive waste and radiological protection, and the accompanying national regulatory requirements. This Safety Guide highlights the important elements of effective management in relation to these aspects of safety. The attention to be paid to safety requires that the management recognize that personnel involved in the nuclear power programme should understand, respond effectively to, and continuously search for ways to enhance safety in the light of any additional requirements socially and legally demanded of nuclear energy. This will help to ensure that safety policies that result in the safe operation of nuclear power plants are implemented and that margins of safety are always maintained. The structure of the organization, management standards and administrative controls should be such that there is a high degree of assurance that safety policies and decisions are implemented, safety is continuously enhanced and a strong safety culture is promoted and supported. The objective of this publication is to guide Member States in setting up an operating organization which facilitates the safe operation of nuclear power plants to a high level internationally. The second objective is to provide guidance on the most important organizational elements in order to contribute to a strong safety

The operating organization for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2004-01-01

This Safety Guide was prepared under the IAEA programme for safety standards for nuclear power plants. The present publication is a revision of the IAEA Safety Guide on Management of Nuclear Power Plants for Safe Operation issued in 1984. It supplements Section 2 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation. Nuclear power technology is different from the customary technology of power generation from fossil fuel and by hydroelectric means. One major difference between the management of nuclear power plants and that of conventional generating plants is the emphasis that should be placed on nuclear safety, quality assurance, the management of radioactive waste and radiological protection, and the accompanying national regulatory requirements. This Safety Guide highlights the important elements of effective management in relation to these aspects of safety. The attention to be paid to safety requires that the management recognize that personnel involved in the nuclear power programme should understand, respond effectively to, and continuously search for ways to enhance safety in the light of any additional requirements socially and legally demanded of nuclear energy. This will help to ensure that safety policies that result in the safe operation of nuclear power plants are implemented and that margins of safety are always maintained. The structure of the organization, management standards and administrative controls should be such that there is a high degree of assurance that safety policies and decisions are implemented, safety is continuously enhanced and a strong safety culture is promoted and supported. The objective of this publication is to guide Member States in setting up an operating organization which facilitates the safe operation of nuclear power plants to a high level internationally. The second objective is to provide guidance on the most important organizational elements in order to contribute to a strong safety

Driver characteristics associated with child safety seat usage in Malaysia: a cross-sectional study.

Science.gov (United States)

Kulanthayan, S; Razak, Ahmad; Schenk, Ellen

2010-03-01

The rapidly motorizing environment in Malaysia has made child occupant safety a current public health concern. The usage of child safety seats (CSS) is a widely regarded intervention to enhance child occupant safety, yet no study has been conducted on CSS in Malaysia. This study aims to determine the CSS usage rates in Malaysia and to assess driver characteristics that are associated with CSS usage. Nine variables - urban versus rural study location, age, gender, marital status, educational status, monthly family income, number of children present in the vehicle, distance traveled to the study location, and attitude - were examined through a cross-sectional study of interviewing drivers of 230 vehicles transporting at least one child safety in Malaysia. The results indicate that interventional efforts should focus on educational programs geared toward drivers that are less educated or extended family members who inconsistently transport young children. Furthermore, any educational efforts could be strongly enhanced by legislation mandating the use of CSS. Every effort should be made to thoroughly assess the effectiveness of any educational or legislative activities that are implemented. Copyright 2009 Elsevier Ltd. All rights reserved.

Safety and effectiveness considerations for clinical studies of visual prosthetic devices

Science.gov (United States)

Cohen, Ethan D.

2007-03-01

With the advent of new designs of visual prostheses for the blind, FDA is faced with developing guidance for evaluating their engineering, safety and patient performance. Visual prostheses are considered significant risk medical devices, and their use in human clinical trials must be approved by FDA under an investigation device exemption (IDE). This paper contains a series of test topics and design issues that sponsors should consider in order to assess the safety and efficacy of their device. The IDE application includes a series of pre-clinical and clinical data sections. The pre-clinical section documents laboratory, animal and bench top performance tests of visual prostheses safety and reliability to support a human clinical trial. The materials used in constructing the implant should be biocompatible, sterile, corrosion resistant, and able to withstand any forces exerted on it during normal patient use. The clinical data section is composed of items related to patient-related evaluation of device performance. This section documents the implantation procedure, trial design, statistical analysis and how visual performance is assessed. Similar to cochlear implants, a visual prosthesis is expected to last in the body for many years, and good pre-clinical and clinical testing will help ensure its safety, durability and effectiveness.

Patient safety climate profiles across time: Strength and level of safety climate associated with a quality improvement program in Switzerland—A cross-sectional survey study

Science.gov (United States)

Mascherek, Anna C.

2017-01-01

Safety Climate has been acknowledged as an unspecific factor influencing patient safety. However, studies rarely provide in-depth analysis of climate data. As a helpful approach, the concept of “climate strength” has been proposed. In the present study we tested the hypotheses that even if safety climate remains stable on mean-level across time, differences might be evident in strength or shape. The data of two hospitals participating in a large national quality improvement program were analysed for differences in climate profiles at two measurement occasions. We analysed differences on mean-level, differences in percent problematic response, agreement within groups, and frequency histograms in two large hospitals in Switzerland at two measurement occasions (2013 and 2015) applying the Safety Climate Survey. In total, survey responses of 1193 individuals were included in the analyses. Overall, small but significant differences on mean-level of safety climate emerged for some subgroups. Also, although agreement was strong at both time-points within groups, tendencies of divergence or consensus were present in both hospitals. Depending on subgroup and analyses chosen, differences were more or less pronounced. The present study illustrated that taking several measures into account and describing safety climate from different perspectives is necessary in order to fully understand differences and trends within groups and to develop interventions addressing the needs of different groups more precisely. PMID:28753633

Method of calculating the safety factor profile on the HT-7 tokamak

International Nuclear Information System (INIS)

Zhang Xianmei; Lu Yuancheng; Wan Baonian

2001-01-01

A method of calculating the safety factor profile on the HT-7 tokamak has been described. It is derived from Maxwell's equations, among which the authors mainly use two of them: one is the magnetic field diffusion equation, and the other is Ampere's Law. This method can be also used to evaluate the safety factor on other devices with a circular cross sections. It is helpful to the study of the plasma MHD behavior on the HT-7 tokamak

Factors Associated with Help Seeking Behavior of Turkish Women with Urinary Incontinence; A Single Center Cross-Sectional Study

Directory of Open Access Journals (Sweden)

Seyhan Sönmez

2017-12-01

Full Text Available Objectives: The aim of this study was to determine the patient and UI-related factors affecting help seeking behavior of Turkish women with undiagnosed urinary incontinence Methods: This cross-sectional study was conducted on 490 female patients aged > 18 years old and were seen in general gynecology outpatients’ clinic of Denizli State Hospital. According to referral complaint and results of UDI-6 questionnaire, the participants were classified into 3 groups: Group A: Help seeker patient, Group B: Non help seeker patient and Group C: Continent patient. Results: Overall UI prevelance was 24%. Nearly two thirds ( 67% of the UI patients do not complaint about their UI symptoms unless they were asked specifically about UI. Consultation rate increased with age, duration of incontinence, menopause and the severity of UI. After logistic regression analyses, only increasing age, UDI-6 score and severity (SSS were found to be associated independently with help seeking behavior. Conclusions: This study showed that, older, more bothered and severe UI patients visit physician and seek medical help. Still nearly half of women who are suffering from clinically significant UI remain undiagnosed and untreated. Regardless the visiting reason if its asked specifically for UI symptoms by using simple questionnaires, we can reveal and diagnose this patients’ group that is suffering from UI but yet keeps it disguise . Keywords: Urinary incontinence, help seeking behavior, undiagnosed urinary incontinence

Road Infrastructure Safety Management in Poland

Science.gov (United States)

Budzynski, Marcin; Jamroz, Kazimierz; Kustra, Wojciech; Michalski, Lech; Gaca, Stanislaw

2017-10-01

stretch, road section, junction, etc.). The objective of the methods is to help road authorities to take rational decisions in the area of road safety and road infrastructure safety and understand the consequences occurring in the particular phases of road life cycle. To help with assessing the impact of a road project on the safety of related roads, a method was developed for long-term forecasts of accidents and accident cost estimation as well as a risk classification to identify risks that are not acceptable risks. With regard to road safety audits and road safety inspection, a set of principles was developed to identify risks and the basic classification of mistakes and omissions. This work has added to the Polish experience of preparing and implementing such tools within the competent road authorities.

Environmental, health, and safety issues of sodium-sulfur batteries for electric and hybrid vehicles. Volume 1, Cell and battery safety

Energy Technology Data Exchange (ETDEWEB)

Ohi, J M

1992-09-01

This report is the first of four volumes that identify and assess the environmental, health, and safety issues involved in using sodium-sulfur (Na/S) battery technology as the energy source in electric and hybrid vehicles that may affect the commercialization of Na/S batteries. This and the other reports on recycling, shipping, and vehicle safety are intended to help the Electric and Hybrid Propulsion Division of the Office of Transportation Technologies in the US Department of Energy (DOE/EHP) determine the direction of its research, development, and demonstration (RD&D) program for Na/S battery technology. The reports review the status of Na/S battery RD&D and identify potential hazards and risks that may require additional research or that may affect the design and use of Na/S batteries. This volume covers cell design and engineering as the basis of safety for Na/S batteries and describes and assesses the potential chemical, electrical, and thermal hazards and risks of Na/S cells and batteries as well as the RD&D performed, under way, or to address these hazards and risks. The report is based on a review of the literature and on discussions with experts at DOE, national laboratories and agencies, universities, and private industry. Subsequent volumes will address environmental, health, and safety issues involved in shipping cells and batteries, using batteries to propel electric vehicles, and recycling and disposing of spent batteries. The remainder of this volume is divided into two major sections on safety at the cell and battery levels. The section on Na/S cells describes major component and potential failure modes, design, life testing and failure testing, thermal cycling, and the safety status of Na/S cells. The section on batteries describes battery design, testing, and safety status. Additional EH&S information on Na/S batteries is provided in the appendices.

Improving safety on rural local and tribal roads safety toolkit.

Science.gov (United States)

2014-08-01

Rural roadway safety is an important issue for communities throughout the country and presents a challenge for state, local, and Tribal agencies. The Improving Safety on Rural Local and Tribal Roads Safety Toolkit was created to help rural local ...

Strengthening leadership as a catalyst for enhanced patient safety culture: a repeated cross-sectional experimental study.

Science.gov (United States)

Kristensen, Solvejg; Christensen, Karl Bang; Jaquet, Annette; Møller Beck, Carsten; Sabroe, Svend; Bartels, Paul; Mainz, Jan

2016-05-13

Current literature emphasises that clinical leaders are in a position to enable a culture of safety, and that the safety culture is a performance mediator with the potential to influence patient outcomes. This paper aims to investigate staff's perceptions of patient safety culture in a Danish psychiatric department before and after a leadership intervention. A repeated cross-sectional experimental study by design was applied. In 2 surveys, healthcare staff were asked about their perceptions of the patient safety culture using the 7 patient safety culture dimensions in the Safety Attitudes Questionnaire. To broaden knowledge and strengthen leadership skills, a multicomponent programme consisting of academic input, exercises, reflections and discussions, networking, and action learning was implemented among the clinical area level leaders. In total, 358 and 325 staff members participated before and after the intervention, respectively. 19 of the staff members were clinical area level leaders. In both surveys, the response rate was >75%. The proportion of frontline staff with positive attitudes improved by ≥5% for 5 of the 7 patient safety culture dimensions over time. 6 patient safety culture dimensions became more positive (increase in mean) (pculture are remarkable, and imply that strengthening the leadership can act as a significant catalyst for patient safety culture improvement. Further studies using a longitudinal study design are recommended to investigate the mechanism behind leadership's influence on patient safety culture, sustainability of improvements over time, and the association of change in the patient safety culture measures with change in psychiatric patient safety outcomes. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Development of a Safety Management Web Tool for Horse Stables.

Science.gov (United States)

Leppälä, Jarkko; Kolstrup, Christina Lunner; Pinzke, Stefan; Rautiainen, Risto; Saastamoinen, Markku; Särkijärvi, Susanna

2015-11-12

Managing a horse stable involves risks, which can have serious consequences for the stable, employees, clients, visitors and horses. Existing industrial or farm production risk management tools are not directly applicable to horse stables and they need to be adapted for use by managers of different types of stables. As a part of the InnoEquine project, an innovative web tool, InnoHorse, was developed to support horse stable managers in business, safety, pasture and manure management. A literature review, empirical horse stable case studies, expert panel workshops and stakeholder interviews were carried out to support the design. The InnoHorse web tool includes a safety section containing a horse stable safety map, stable safety checklists, and examples of good practices in stable safety, horse handling and rescue planning. This new horse stable safety management tool can also help in organizing work processes in horse stables in general.

Patient safety culture in out-of-hours primary care services in the Netherlands: a cross-sectional survey.

Science.gov (United States)

Smits, Marleen; Keizer, Ellen; Giesen, Paul; Deilkås, Ellen Catharina Tveter; Hofoss, Dag; Bondevik, Gunnar Tschudi

2018-03-01

To examine patient safety culture in Dutch out-of-hours primary care using the safety attitudes questionnaire (SAQ) which includes five factors: teamwork climate, safety climate, job satisfaction, perceptions of management and communication openness. Cross-sectional observational study using an anonymous web-survey. Setting Sixteen out-of-hours general practitioner (GP) cooperatives and two call centers in the Netherlands. Subjects Primary healthcare providers in out-of-hours services. Main outcome measures Mean scores on patient safety culture factors; association between patient safety culture and profession, gender, age, and working experience. Overall response rate was 43%. A total of 784 respondents were included; mainly GPs (N = 470) and triage nurses (N = 189). The healthcare providers were most positive about teamwork climate and job satisfaction, and less about communication openness and safety climate. The largest variation between clinics was found on safety climate; the lowest on teamwork climate. Triage nurses scored significantly higher than GPs on each of the five patient safety factors. Older healthcare providers scored significantly higher than younger on safety climate and perceptions of management. More working experience was positively related to higher teamwork climate and communication openness. Gender was not associated with any of the patient safety factors. Our study showed that healthcare providers perceive patient safety culture in Dutch GP cooperatives positively, but there are differences related to the respondents' profession, age and working experience. Recommendations for future studies are to examine reasons for these differences, to examine the effects of interventions to improve safety culture and to make international comparisons of safety culture. Key Points Creating a positive patient safety culture is assumed to be a prerequisite for quality and safety. We found that: • healthcare providers in Dutch GP cooperatives

Triangulating case-finding tools for patient safety surveillance: a cross-sectional case study of puncture/laceration.

Science.gov (United States)

Taylor, Jennifer A; Gerwin, Daniel; Morlock, Laura; Miller, Marlene R

2011-12-01

To evaluate the need for triangulating case-finding tools in patient safety surveillance. This study applied four case-finding tools to error-associated patient safety events to identify and characterise the spectrum of events captured by these tools, using puncture or laceration as an example for in-depth analysis. Retrospective hospital discharge data were collected for calendar year 2005 (n=48,418) from a large, urban medical centre in the USA. The study design was cross-sectional and used data linkage to identify the cases captured by each of four case-finding tools. Three case-finding tools (International Classification of Diseases external (E) and nature (N) of injury codes, Patient Safety Indicators (PSI)) were applied to the administrative discharge data to identify potential patient safety events. The fourth tool was Patient Safety Net, a web-based voluntary patient safety event reporting system. The degree of mutual exclusion among detection methods was substantial. For example, when linking puncture or laceration on unique identifiers, out of 447 potential events, 118 were identical between PSI and E-codes, 152 were identical between N-codes and E-codes and 188 were identical between PSI and N-codes. Only 100 events that were identified by PSI, E-codes and N-codes were identical. Triangulation of multiple tools through data linkage captures potential patient safety events most comprehensively. Existing detection tools target patient safety domains differently, and consequently capture different occurrences, necessitating the integration of data from a combination of tools to fully estimate the total burden.

CSRL-V ENDF/B-V 227-group neutron cross-section library and its application to thermal-reactor and criticality safety benchmarks

International Nuclear Information System (INIS)

Ford, W.E. III; Diggs, B.R.; Knight, J.R.; Greene, N.M.; Petrie, L.M.; Webster, C.C.; Westfall, R.M.; Wright, R.Q.; Williams, M.L.

1982-01-01

Characteristics and contents of the CSRL-V (Criticality Safety Reference Library based on ENDF/B-V data) 227-neutron-group AMPX master and pointwise cross-section libraries are described. Results obtained in using CSRL-V to calculate performance parameters of selected thermal reactor and criticality safety benchmarks are discussed

Electronic Health Record-Related Safety Concerns: A Cross-Sectional Survey of Electronic Health Record Users

Science.gov (United States)

Pajunen, Tuuli; Saranto, Kaija; Lehtonen, Lasse

2016-01-01

Background The rapid expansion in the use of electronic health records (EHR) has increased the number of medical errors originating in health information systems (HIS). The sociotechnical approach helps in understanding risks in the development, implementation, and use of EHR and health information technology (HIT) while accounting for complex interactions of technology within the health care system. Objective This study addresses two important questions: (1) “which of the common EHR error types are associated with perceived high- and extreme-risk severity ratings among EHR users?”, and (2) “which variables are associated with high- and extreme-risk severity ratings?” Methods This study was a quantitative, non-experimental, descriptive study of EHR users. We conducted a cross-sectional web-based questionnaire study at the largest hospital district in Finland. Statistical tests included the reliability of the summative scales tested with Cronbach’s alpha. Logistic regression served to assess the association of the independent variables to each of the eight risk factors examined. Results A total of 2864 eligible respondents provided the final data. Almost half of the respondents reported a high level of risk related to the error type “extended EHR unavailability”. The lowest overall risk level was associated with “selecting incorrectly from a list of items”. In multivariate analyses, profession and clinical unit proved to be the strongest predictors for high perceived risk. Physicians perceived risk levels to be the highest (Prisk levels (PeLearning courses on EHR-use was associated with lower risk for some of the risk factors. Conclusions Based on a large number of Finnish EHR users in hospitals, this study indicates that HIT safety hazards should be taken very seriously, particularly in operating rooms, procedure units, emergency departments, and intensive care units/critical care units. Health care organizations should use proactive and

OSART Works to Help Member States

International Nuclear Information System (INIS)

Kaiser, Peter

2013-01-01

Full text: Nuclear safety is a never ending pursuit for improvement, and one of the more prominent IAEA efforts that help Member States achieve higher levels of safety is the Operational Safety Review Team (OSART) programme. In OSART missions, the IAEA coordinates internationally-based teams of experts who conduct reviews of operational safety performance at nuclear power plants. The IAEA on 14 June 2013 marked the 30th anniversary of OSART. In 1983, the Agency conducted its first OSART mission to the Kori Nuclear Power Plant in the Republic of Korea, and it conducted a total of 174 OSART missions over the following 30 years. The reviews have been done in 34 nations at 103 nuclear sites. (author)

Prevalence and predictors of help-seeking for women exposed to spousal violence in India - a cross-sectional study.

Science.gov (United States)

Leonardsson, Malin; San Sebastian, Miguel

2017-11-03

Spousal violence against women is prevalent in India (29%). Studies from various countries have shown that few women exposed to intimate partner violence or spousal violence seek help, especially in low-income countries. The objective of this study was to estimate the prevalence and predictors of help-seeking among women in India who have experienced various types of spousal violence. Cross-sectional data on 19,125 married, separated, divorced or widowed women in India who had experienced physical or sexual violence at the hands of their husbands were obtained from the India National Family Health Survey III 2005-2006. Bivariate and multivariate logistic regression analyses were carried out. Less than one fourth (23.7%) of married, separated, divorced or widowed women in India who had experienced some form of physical or sexual spousal violence had sought help, but only 1% had sought help from formal institutions. Help-seeking was most prevalent in women who had been exposed to a combination of physical, sexual and emotional abuse (48.8%) and the least prevalent in women who had experienced sexual violence only (1.5%). Experience of severe violence and violence resulting in injury were the strongest predictors of help-seeking. Having education, being Christian or an acknowledged adherent of another minority religion - mainly Buddhism and Sikhism (Islam not included), getting married after the age of 21 and living in the South region were also associated with seeking help. Women in the North and Northeast regions were less likely to seek help, as were women with children and women who thought that a husband could be justified in hitting his wife. Very few Indian women who experience spousal violence seek help. The characteristics of the violence are the strongest predictors of help-seeking, but sociodemographic factors are also influential. We recommend efforts to ensure educational attainment for girls, prevention of child marriages, and that police officers and

Motivational Maturity and Helping Behavior

Science.gov (United States)

Haymes, Michael; Green, Logan

1977-01-01

Maturity in conative development (type of motivation included in Maslow's needs hierarchy) was found to be predictive of helping behavior in middle class white male college students. The effects of safety and esteem needs were compared, and the acceptance of responsibility was also investigated. (GDC)

Patient Safety Culture in Intensive Care Units from the Perspective of Nurses: A Cross-Sectional Study.

Science.gov (United States)

Farzi, Sedigheh; Moladoost, Azam; Bahrami, Masoud; Farzi, Saba; Etminani, Reza

2017-01-01

One of the goals of nursing is providing safe care, prevention of injury, and health promotion of patients. Patient safety in intensive care units is threatened for various reasons. This study aimed to survey patient safety culture from the perspective of nurses in intensive care units. This cross-sectional study was conducted in 2016. Sampling was done using the convenience method. The sample consisted of 367 nurses working in intensive care units of teaching hospitals affiliated to Isfahan University of Medical Sciences. Data collection was performed using a two-part questionnaire that included demographic and hospital survey on Patient Safety Culture (HSOPSC) questionnaire. Data analysis was done using descriptive statistics (mean and standard deviation). Among the 12 dimensions of safety culture, the nurses assigned the highest score to "team work within units" (97.3%) and "Organizational learning-continuous improvement" (84%). They assigned the least score to "handoffs and transitions"(21.1%), "non-punitive response to errors" (24.7%), "Staffing" (35.6%), "Communication openness" (47.5%), and "Teamwork across units" (49.4%). The patient safety culture dimensions have low levels that require adequate attention and essential measures of health care centers including facilitating teamwork, providing adequate staff, and developing a checklist of handoffs and transitions. Furthermore, to increase reporting error and to promote a patient safety culture in intensive care units, some strategies should be adopted including a system-based approach to deal with the error.

Fieldcrest Cannon, Inc. Advanced Technical Preparation. Statistical Process Control (SPC). Safety Section: Modules 1-3. Instructor Book.

Science.gov (United States)

Averitt, Sallie D.

These three modules, which were developed for use by instructors in a manufacturing firm's advanced technical preparation program, contain the materials required to present the safety section of the plant's adult-oriented, job-specific competency-based training program. The 3 modules contain 12 lessons on the following topics: lockout/tagout…

Occupational safety and health aspects of corporate social responsibility (CSR) in Japanese companies listed on the Tokyo Stock Exchange (TSE) first section.

Science.gov (United States)

Kawashita, Futoshi; Taniyama, Yukari; Hwi, Song You; Fujisaki, Takeshi; Kameda, Takashi; Mori, Koji

2005-11-01

Recently, corporate social responsibility (CSR) is becoming widely recognized as an issue for Japanese companies. Corporate responsibility for employees is considered important by various stakeholders, and occupational safety and health is regarded as one of these responsibilities. The present authors examined this issue from the viewpoint of corporate management by analysis of statements found in CSR-related reports. For companies listed on the First Section of the Tokyo Stock Exchange (TSE), we searched for CSR-related reports, and titles and contents, based on two established guidelines: the GRI Sustainability Reporting Guidelines 2002 as the international reference and the Environmental Reporting Guidelines of the Ministry of the Environment, Government of Japan, as the domestic reference. Corporations that published CSR reports were 26.3% (416/1,581) of the total, and large differences were recognized by type of industry. Comparing the numbers of pages for various contents, more concern was shown about the environment than about social activity, indicating the environment to be the main issue of CSR in Japan. In the items included in the guidelines, many matters about occupational accidents were mentioned, but it was found that statements regarding HIV/AIDS, which is not of such strong social concern in Japan, and statements regarding the costs of safety that are difficult to calculate were few. However, statements regarding mental health, which is of high interest socially, were many, even though this issue is not included in the two guidelines used. In revising the guidelines, these matters should be reviewed. In the future, continuance of analysis of CSR-related reports with regard to changes and comparisons with overseas reports will help improve occupational safety and health.

Patient safety and quality improvement education: a cross-sectional study of medical students’ preferences and attitudes

Directory of Open Access Journals (Sweden)

Teigland Claire L

2013-02-01

Full Text Available Abstract Background Recent educational initiatives by both the World Health Organization and the American Association of Medical Colleges have endorsed integrating teaching of patient safety and quality improvement (QI to medical students. Curriculum development should take into account learners’ attitudes and preferences. We surveyed students to assess preferences and attitudes about QI and patient safety education. Methods An electronic survey was developed through focus groups, literature review, and local expert opinion and distributed via email to all medical students at a single medical school in the spring of 2012. Results A greater proportion of students reported previous exposure to patient safety than to quality improvement topics (79% vs. 47%. More than 80% of students thought patient safety was of the same or greater importance than basic science or clinical skills whereas quality improvement was rated as the same or more important by about 70% of students. Students rated real life examples of quality improvement projects and participation in these projects with actual patients as potentially the most helpful (mean scores 4.2/5 and 3.9/5 respectively. For learning about patient safety, real life examples of mistakes were again rated most highly (mean scores 4.5/5 for MD presented mistakes and 4.1/5 for patient presented mistakes. Students rated QI as very important to their future career regardless of intended specialty (mean score 4.5/5. Conclusions Teaching of patient safety and quality improvement to medical students will be best received if it is integrated into clinical education rather than solely taught in pre-clinical lectures or through independent computer modules. Students recognize that these topics are important to their careers as future physicians regardless of intended specialty.

Use of a Computerized Tool (ORAM) to Help Manage Outage Safety and Risk at NPP Krsko

International Nuclear Information System (INIS)

Spiler, J.; Basic, I.; Vrbanic, I.; Fifnja, I.; Kastelan, M.; Dagan, W. J.; Shanley, L. B.; Naum, T. J.

1998-01-01

Outage Risk Assessment and Management (ORAM) is a computerized methodology developed by the U.S. Electric Power Research Institute (EPRI) to help Nuclear Power Plant personnel manage the risk and safety associated with refueling and forced plant outages. Today, over 60 plants including NPP Krsko are using ORAM during the preparation and performance of plant outages. In fact, many plants are attributing much of the reductions in the duration of refueling outages to the use of ORAM. The success of the ORAM methodology is the capability to provide plant and management personnel with understandable results from both deterministic evaluations of plant safety and quantitative risk assessments. The Nuklearna Elektrarna Krsko (NEK) use of ORAM involves both of these approaches. The deterministic portion of ORAM is used to model the NPP Krsko Shutdown Technical Specifications and administrative considerations. The probabilistic portion of ORAM uses industry and NEK specific initiating events and other risk elements pertaining to shutdown to derive a quantitative risk assessment for various end states, including core damage and RCS boiling. This paper expands on the value of each approach and demonstrates the benefits of combining these elements in the decision-making process. Another key advantage of ORAM is the ability to apply the methodology to specific outages. Since no outage is identical, this provides tremendous benefits to plant personnel for managing the safety and risk of a particular outage. ORAM does this ba organizing all of the various plant configurations and equipment unavailability windows into numerous plant states. Furthermore, ORAM evaluations can be a utomated b y interfacing with outage scheduling software programs such as Primavera. For each plant state, the deterministic and the probabilistic logic evaluations are applied. This paper will demonstrate the ORAM evaluation for an actual NPP Krsko outage. (author)

Safety assessment and verification for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2001-01-01

verification' are used differently in different countries. The way that these terms have been used in this Safety Guide is explained in Section 2. The term 'design' as used here includes the specifications for the safe operation and management of the plant. This Safety Guide identifies the key recommendations for carrying out the safety assessment and the independent verification. It provides detailed guidance in support of IAEA, Safety of Nuclear Power Plants: Design, Safety Standards Series No. NS-R-1 (2000), particularly in the area of safety analysis. However, this does not include all the technical details which are available and reference is made to other IAEA publications on specific design issues and safety analysis methods. Specific deterministic or probabilistic safety targets or radiological limits can vary in different countries and are the responsibility of the regulatory body. This Safety Guide provides some references to targets and limits established by international organizations. Operators, and sometimes designers, may also set their own safety targets which may be more stringent than those set by the regulator or may address different aspects of safety. In some countries operators are expected to do this as part of their 'ownership' of the entire safety case. This Safety Guide does not include specific recommendations for the safety assessment of those plant systems for which dedicated Safety Guides exist. Section 2 defines the terms 'safety assessment', 'safety analysis' and 'independent verification' and outlines their relationship. Section 3 gives the key recommendations for the safety assessment of the principal and plant design requirements. Section 4 gives the key recommendations for safety analysis. It describes the identification of postulated initiating events (PIEs), which are used throughout the safety assessment including the safety analysis, the deterministic transient analysis and severe accident analysis, and the probabilistic safety analysis

Patient safety culture in intensive care units from the perspective of nurses: A cross-sectional study

Directory of Open Access Journals (Sweden)

Sedigheh Farzi

2017-01-01

Full Text Available Background: One of the goals of nursing is providing safe care, prevention of injury, and health promotion of patients. Patient safety in intensive care units is threatened for various reasons. This study aimed to survey patient safety culture from the perspective of nurses in intensive care units. Materials and Methods: This cross-sectional study was conducted in 2016. Sampling was done using the convenience method. The sample consisted of 367 nurses working in intensive care units of teaching hospitals affiliated to Isfahan University of Medical Sciences. Data collection was performed using a two-part questionnaire that included demographic and hospital survey on Patient Safety Culture (HSOPSC questionnaire. Data analysis was done using descriptive statistics (mean and standard deviation. Results: Among the 12 dimensions of safety culture, the nurses assigned the highest score to “team work within units” (97.3% and “Organizational learning-continuous improvement” (84%. They assigned the least score to “handoffs and transitions”(21.1%, “non-punitive response to errors” (24.7%, “Staffing” (35.6%, “Communication openness” (47.5%, and “Teamwork across units” (49.4%. Conclusions: The patient safety culture dimensions have low levels that require adequate attention and essential measures of health care centers including facilitating teamwork, providing adequate staff, and developing a checklist of handoffs and transitions. Furthermore, to increase reporting error and to promote a patient safety culture in intensive care units, some strategies should be adopted including a system-based approach to deal with the error.

Tips to Help You Get Active

Science.gov (United States)

... A Step in the Right Direction Tips to Help You Get Active View or Print All Sections ... and quality of life. Being more active may help you manage your weight. Starting Physical Activity Healthy ...

Developing patient safety in dentistry.

Science.gov (United States)

Pemberton, M N

2014-10-01

Patient safety has always been important and is a source of public concern. Recent high profile scandals and subsequent reports, such as the Francis report into the failings at Mid Staffordshire, have raised those concerns even higher. Mortality and significant morbidity associated with the practice of medicine has led to many strategies to help improve patient safety, however, with its lack of associated mortality and lower associated morbidity, dentistry has been slower at systematically considering how patient safety can be improved. Recently, several organisations, researchers and clinicians have discussed the need for a patient safety culture in dentistry. Strategies are available to help improve patient safety in healthcare and deserve further consideration in dentistry.

Present activity in ASME Section XI regarding risk-informed maintenance

International Nuclear Information System (INIS)

Hedden, Owen; Chockie, Alan

2005-01-01

Since 1996 Section XI of the ASME Boiler and Pressure Vessel Code has actively incorporated risk-informed concepts. The risk-informed process provides a framework for allocating inspection resources in a cost-effective manner and helps focus inspections where most critical for plant safety. Based on the success of the risk-informed ISI piping applications at US and non-US plants, Section XI has refined existing Code Cases and expanded the use of the risk-informed process to a variety of high-risk components and systems. The risk informed approach started in the area of inspection and is now being expanded to other plant maintenance activities. This article summarizes the Section XI actions and the continued development of the risk-informed process to improve nuclear plant maintenance. (author)

A cross-sectional study to identify organisational processes associated with nurse-reported quality and patient safety

Science.gov (United States)

Tvedt, Christine; Sjetne, Ingeborg Strømseng; Helgeland, Jon; Bukholm, Geir

2012-01-01

Objectives The purpose of this study was to identify organisational processes and structures that are associated with nurse-reported patient safety and quality of nursing. Design This is an observational cross-sectional study using survey methods. Setting Respondents from 31 Norwegian hospitals with more than 85 beds were included in the survey. Participants All registered nurses working in direct patient care in a position of 20% or more were invited to answer the survey. In this study, 3618 nurses from surgical and medical wards responded (response rate 58.9). Nurses' practice environment was defined as organisational processes and measured by the Nursing Work Index Revised and items from Hospital Survey on Patient Safety Culture. Outcome measures Nurses' assessments of patient safety, quality of nursing, confidence in how their patients manage after discharge and frequency of adverse events were used as outcome measures. Results Quality system, nurse–physician relation, patient safety management and staff adequacy were process measures associated with nurse-reported work-related and patient-related outcomes, but we found no associations with nurse participation, education and career and ward leadership. Most organisational structures were non-significant in the multilevel model except for nurses’ affiliations to medical department and hospital type. Conclusions Organisational structures may have minor impact on how nurses perceive work-related and patient-related outcomes, but the findings in this study indicate that there is a considerable potential to address organisational design in improvement of patient safety and quality of care. PMID:23263021

Patient safety in practical nurses' education: A cross-sectional survey of newly registered practical nurses in Canada.

Science.gov (United States)

VanDenKerkhof, Elizabeth; Sears, Nancy; Edge, Dana S; Tregunno, Deborah; Ginsburg, Liane

2017-04-01

Practical nurses have experienced an increasing scope of practice, including an expectation to care for complex patients and function on interdisciplinary teams. Little is known about the degree to which patient safety principles are addressed in practical nursing education. To examine self-reported patient safety competencies of practical nurses. A cross-sectional online survey (July 2014) and face-to-face interviews (June 2015). Ontario, Canada. Survey participants were practical nurses newly registered with the College of Nurses of Ontario between January 2012 and December 2013. Interview participants were faculty and students in a practical nursing program in Ontario. Survey respondents completed the Health Professional Education in Patient Safety Survey online. Self-reported competencies in various patient safety domains were compared between classroom and clinical settings. Faculty members were interviewed about educational preparation of practical nurses and students were interviewed to provide insight into interpretation of survey questions. The survey response rate was 28.4% (n=1104/3883). Mean domain scores indicated a high level of confidence in patient safety competence (Nurses of Ontario >2years and in those who obtained their education outside of Canada. Faculty believed their approach to teaching and learning instilled a deep understanding of the limits to practical nurse autonomous practice. Practical nurses were confident in what they learned about patient safety in their educational programs. The high degree of patient safety competence may be a true reflection of practical nurses understanding of, and comfort with, the limits of their knowledge and, ultimately, the limits of their individual autonomous practice. Further exploration as to whether the questionnaire requires additional modification for use with practical nurse populations is warranted. However, this study provides the first examination of practical nurses' perspectives and

Farm Health and Safety

Science.gov (United States)

... the United States. Farms have many health and safety hazards, including Chemicals and pesticides Machinery, tools and ... inspection and maintenance can help prevent accidents. Using safety gloves, goggles and other protective equipment can also ...

Predicting help-seeking behavior: The impact of knowing someone close who has sought help.

Science.gov (United States)

Disabato, David J; Short, Jerome L; Lameira, Diane M; Bagley, Karen D; Wong, Stephanie J

2018-02-15

This study sought to replicate and extend research on social facilitators of college student's help seeking for psychological problems. We collected data on 420 ethnically diverse college students at a large public university (September 2008-May 2010). Students completed a cross-sectional online survey. We found that students who were aware of close others' (eg, family, friends) help seeking were two times more likely to have sought formal (eg, psychologist) and informal (eg, clergy) help themselves. Tests of moderation revealed the incremental effect (ie, controlling for help-seeking attitudes, internalizing symptoms, cultural demographics) of close others' formal help seeking was strong and significant for men (R 2 = 0.112), while it was negligible and nonsignificant for women (R 2 = .002). We discuss the importance for students-particularly men-to learn about close others' help seeking for facilitating their own help seeking during times of distress.

Safety training for working youth: Methods used versus methods wanted.

Science.gov (United States)

Zierold, Kristina M

2016-04-07

Safety training is promoted as a tool to prevent workplace injury; however, little is known about the safety training experiences young workers get on-the-job. Furthermore, nothing is known about what methods they think would be the most helpful for learning about safe work practices. To compare safety training methods teens get on the job to those safety training methods teens think would be the best for learning workplace safety, focusing on age differences. A cross-sectional survey was administered to students in two large high schools in spring 2011. Seventy percent of working youth received safety training. The top training methods that youth reported getting at work were safety videos (42%), safety lectures (25%), and safety posters/signs (22%). In comparison to the safety training methods used, the top methods youth wanted included videos (54%), hands-on (47%), and on-the-job demonstrations (34%). This study demonstrated that there were differences in training methods that youth wanted by age; with older youth seemingly wanting more independent methods of training and younger teens wanting more involvement. Results indicate that youth want methods of safety training that are different from what they are getting on the job. The differences in methods wanted by age may aid in developing training programs appropriate for the developmental level of working youth.

Reasons for quitting cigarette smoking and electronic cigarette use for cessation help.

Science.gov (United States)

Pokhrel, Pallav; Herzog, Thaddeus A

2015-03-01

Despite the lack of clarity regarding their safety and efficacy as smoking cessation aids, electronic cigarettes (e-cigarettes) are commonly used to quit smoking. Currently, little is understood about why smokers may use e-cigarettes for help with smoking cessation compared with other, proven cessation aids. This study aimed to determine the reasons for wanting to quit cigarettes that are associated with the use of e-cigarettes for cessation help versus the use of conventional nicotine replacement therapy (NRT) products (e.g., gums). Cross-sectional, self-report data were obtained from 1,988 multiethnic current daily smokers (M age = 45.1, SD = 13.0; 51.3% women) who had made an average of 8.5 (SD = 18.7) lifetime quit attempts but were not currently engaged in a cessation attempt. Reasons for wanting to quit smoking were assessed by using the Reasons for Quitting scale. Path analyses suggested that among reasons for quitting cigarettes, "immediate reinforcement"-a measure of wanting to quit cigarettes for extrinsic reasons such as bad smell, costliness and untidiness-was significantly associated with having tried e-cigarettes for cessation help, and "concerns about health" was associated with having tried NRT-only use. E-cigarettes appear to provide an alternative "smoking" experience to individuals who wish to quit cigarette smoking because of the immediate, undesirable consequences of tobacco smoking (e.g., smell, ash, litter) rather than concerns about health. Provided that the safety of e-cigarette use is ensured, e-cigarettes may be effectively used to reduce tobacco exposure among smokers who may not want to quit cigarettes for intrinsic motivation. (c) 2015 APA, all rights reserved).

ITER-FEAT safety

International Nuclear Information System (INIS)

Gordon, C.W.; Bartels, H.-W.; Honda, T.; Raeder, J.; Topilski, L.; Iseli, M.; Moshonas, K.; Taylor, N.; Gulden, W.; Kolbasov, B.; Inabe, T.; Tada, E.

2001-01-01

Safety has been an integral part of the design process for ITER since the Conceptual Design Activities of the project. The safety approach adopted in the ITER-FEAT design and the complementary assessments underway, to be documented in the Generic Site Safety Report (GSSR), are expected to help demonstrate the attractiveness of fusion and thereby set a good precedent for future fusion power reactors. The assessments address ITER's radiological hazards taking into account fusion's favourable safety characteristics. The expectation that ITER will need regulatory approval has influenced the entire safety design and assessment approach. This paper summarises the ITER-FEAT safety approach and assessments underway. (author)

Radiation safety

International Nuclear Information System (INIS)

1996-04-01

Most of the ionizing radiation that people are exposed to in day-to-day activities comes from natural, rather than manmade, sources. The health effects of radiation - both natural and artificial - are relatively well understood and can be effectively minimized through careful safety measures and practices. The IAEA, together with other international and expert organizations, is helping to promote and institute Basic Safety Standards on an international basis to ensure that radiation sources and radioactive materials are managed for both maximum safety and human benefit

Small business owners' health and safety intentions: A cross-sectional survey

Directory of Open Access Journals (Sweden)

Li Shelby

2005-10-01

Full Text Available Abstract Background Little is known about the variables underlying small business owners' behavioural intentions toward workplace health and safety. This project explores the relationship between three mediating variables (Attitude Toward Safety, Subjective Norm and Perceived Behavioural Control and owners' Intentions Toward Safety, following the Theory of Planned Behaviour. We also investigate the role of beliefs underlying each mediating variable. Methods Seven hundred businesses (5–50 employees were randomly selected from 4084 eligible companies in a manufacturing business database (SIC codes 24 to 39. The 348 respondents are on average 51 yrs of age, 86% male, 96% white and have 2 to 4 years of post-secondary school. Results All three mediator variables are significantly correlated with Intentions Toward Safety; Attitude Toward Safety shows the strongest correlation, which is confirmed by path analysis. Owners with higher attitudes toward safety have a higher probability of believing that improving workplace health and safety will make employees' healthier and happier, show that they care, increase employee productivity, lower workers' compensation costs, increase product quality and lower costs. Conclusion These results suggest that interventions aimed at increasing owners' health and safety intentions (and thus, behaviours should focus on demonstrating positive employee health and product quality outcomes.

The association of patient safety climate and nurse-related organizational factors with selected patient outcomes: a cross-sectional survey.

Science.gov (United States)

Ausserhofer, Dietmar; Schubert, Maria; Desmedt, Mario; Blegen, Mary A; De Geest, Sabina; Schwendimann, René

2013-02-01

Patient safety climate (PSC) is an important work environment factor determining patient safety and quality of care in healthcare organizations. Few studies have investigated the relationship between PSC and patient outcomes, considering possible confounding effects of other nurse-related organizational factors. The purpose of this study was to explore the relationship between PSC and patient outcomes in Swiss acute care hospitals, adjusting for major organizational variables. This is a sub-study of the Swiss arm of the multicenter-cross sectional RN4CAST (Nurse Forecasting: Human Resources Planning in Nursing) study. We utilized data from 1630 registered nurses (RNs) working in 132 surgical, medical and mixed surgical-medical units within 35 Swiss acute care hospitals. PSC was measured with the 9-item Safety Organizing Scale. Other organizational variables measured with established instruments included the quality of the nurse practice environment, implicit rationing of nursing care, nurse staffing, and skill mix levels. We performed multilevel multivariate logistic regression to explore relationships between seven patient outcomes (nurse-reported medication errors, pressure ulcers, patient falls, urinary tract infection, bloodstream infection, pneumonia; and patient satisfaction) and PSC. In none of our regression models was PSC a significant predictor for any of the seven patient outcomes. From our nurse-related organizational variables, the most robust predictor was implicit rationing of nursing care. After controlling for major organizational variables and hierarchical data structure, higher levels of implicit rationing of nursing care resulted in significant decrease in the odds of patient satisfaction (OR=0.276, 95%CI=0.113-0.675) and significant increase in the odds of nurse reported medication errors (OR=2.513, 95%CI=1.118-5.653), bloodstream infections (OR=3.011, 95%CI=1.429-6.347), and pneumonia (OR=2.672, 95%CI=1.117-6.395). We failed to confirm our

The Forest Service Safety Survey: results from an employee-wide safety attitude survey

Science.gov (United States)

Vanessa R. Lane; Ken Cordell; Stanley J. Zarnoch; Gary T. Green; Neelam Poudyal; Susan Fox

2014-01-01

The Forest Service, U.S. Department of Agriculture launched a Safety Journey in 2011 aimed at elevating safety consciousness and practice in the Agency. All employees were required to attend an engagement session during the year to introduce them to the Safety Journey. In September, a survey was launched to help Forest Service leadership better understand employee...

Safety advice sheets

CERN Multimedia

HSE Unit

2013-01-01

You never know when you might be faced with questions such as: when/how should I dispose of a gas canister? Where can I find an inspection report? How should I handle/store/dispose of a chemical substance…?   The SI section of the DGS/SEE Group is primarily responsible for safety inspections, evaluating the safety conditions of equipment items, premises and facilities. On top of this core task, it also regularly issues “Safety Advice Sheets” on various topics, designed to be of assistance to users but also to recall and reinforce safety rules and procedures. These clear and concise sheets, complete with illustrations, are easy to display in the appropriate areas. The following safety advice sheets have been issued so far: Other sheets will be published shortly. Suggestions are welcome and should be sent to the SI section of the DGS/SEE Group. Please send enquiries to general-safety-visits.service@cern.ch.

Validation of Nuclear Criticality Safety Software and 27 energy group ENDF/B-IV cross sections

International Nuclear Information System (INIS)

Lee, B.L. Jr.

1994-08-01

The validation documented in this report is based on calculations that were executed during June through August 1992, and was completed in June 1993. The statistical analyses in Appendix C and Appendix D were completed in October 1993. This validation gives Portsmouth NCS personnel a basis for performing computerized KENO V.a calculations using the Martin Marietta Nuclear Criticality Safety Software. The first portion of the document outlines basic information in regard to validation of NCSS using ENDF/B-IV 27-group cross sections on the IBM 3090 at ORNL. A basic discussion of the NCSS system is provided, some discussion on the validation database and validation in general. Then follows a detailed description of the statistical analysis which was applied. The results of this validation indicate that the NCSS software may be used with confidence for criticality calculations at the Portsmouth Gaseous Diffusion Plant. When the validation results are treated as a single group, there is 95% confidence that 99.9% of future calculations of similar critical systems will have a calculated K eff > 0.9616. Based on this result the Portsmouth Nuclear Criticality Safety Department has adopted the calculational acceptance criteria that a k eff + 2σ ≤ 0.95 is safety subcritical. The validation of NCSS on the IBM 3090 at ORNL was extended to include NCSS on the IBM 3090 at K-25

Diabetes: How and RDN Can Help with Diabetes

Science.gov (United States)

... that your daily cup (or three!) provides some health benefits. How an RDN Can Help with Diabetes Maintaining ... Keep Your Picnic Safe Food Safety Tips for Outdoor Dining Keep Your Picnic Safe Dads and Breast- ...

Perceptions of patient safety culture among healthcare employees in tertiary hospitals of Heilongjiang province in northern China: a cross-sectional study.

Science.gov (United States)

Li, Ying; Zhao, Yanming; Hao, Yanhua; Jiao, Mingli; Ma, Hongkun; Teng, Baijun; Yang, Kai; Sun, Tongbo; Wu, Qunhong; Qiao, Hong

2018-04-19

Assessing the patient safety culture is necessary for improving patient safety. Research on patient safety culture has attracted considerable attention. Currently, there is little research on patient safety culture in China generally, and in Heilongjiang in northern China specifically. The aim of the study is to explore the perception of healthcare employees about patient safety culture and to determine whether perception differs per sex, age, profession, years of experience, education level and marital status. Cross-sectional study. Thirteen tertiary hospitals in Heilongjiang, northern China. About 1024 healthcare employees. The perception of healthcare employees was measured using the safety attitude questionnaire, which include six dimensions. Higher scores represented more positive attitudes. An analysis of variance was used to compare socio-demographic differences per position, marital status and education; t-tests were used for sex, age and experience. A total of 1024 (85.33%) valid questionnaires were returned. The mean score of the six dimensions was 73.74/100; work conditions (80.19) had the highest score of all the dimensions, and safety climate (70.48) had the lowest. Across distinct dimensions, there were significant differences in perceptions of patient safety culture per sex, age, years of experience, position, marital status and education level (P culture among healthcare employees and identifying dimensions that require improvement. Interventions aimed at specific socio-demographic groups are necessary to improve patient safety culture.

Safety indicators: an efficient tool for a better safety

International Nuclear Information System (INIS)

Aufort, P.; Lars, R.

1993-01-01

Safety indicators based on the examination of the Operating Technical Specifications have been defined with the aim of following the in-operation safety level of French nuclear power plants. These safety indicators are operation feedback tools which permit the a posteriori justification and the adjustment of actual procedures. They would allow detection of an abnormal unavailability occurrence rate or a situation revealing a potential safety problem. So, data acquisition, processing, analysis and display software allowing trend analysis of these indicators has been developed so far as: a reflexion tool for the power plant operators about the safety instructions and the adjustment of preventive maintenance, and a help for decision making at a national level for the examination and the improvement of Operating Technical Specifications. This paper presents the objectives of these safety indicators, the processing tool associated, the preliminary results obtained and more elaborate processing of these indicators. These safety indicators may be very useful in framing probabilistic safety assessments. (author)

Influence of parental perception of school safety and gender on children's physical activity in Mexico: A cross sectional study.

Science.gov (United States)

Hutchens, Amy; Soltero, Erica G; Barquera, Simón; Lévesque, Lucie; Jauregui, Edtna; López Y Taylor, Juan; Lee, Rebecca E

2016-01-01

This cross sectional study aims to determine the effects of gender and parental perception of safety at school on children's physical activity (PA) levels. Parents of school aged Mexican children residing in Guadalajara, Mexico City, and Puerto Vallarta, completed surveys about their children's PA measures. The physical activity indicators were evaluated using linear and logistical regression models. Analysis did not indicate that gender moderated the relationship between parental perception of safety and PA measures, but significant gender issues exist with girls participating less than boys in the three measures of PA in this study (p<0.001). Results suggest the need for additional interventions promoting physical activity in girls in Mexico.

Standard Review Plan for the review of safety analysis reports for nuclear power plants, Revision No. 7 to Section 9

International Nuclear Information System (INIS)

1978-03-01

Revision No. 1 to Section 9 of the Standard Review Plan incorporates changes that have been developed since the original issuance in September 1975, many of which are editorial in nature, to reflect current staff practice in the review of safety analysis reports for nuclear power plants

Safety campaigns. TIS Launches New Safety Information Campaign

CERN Multimedia

2001-01-01

Need to start a new installation and worried about safety aspects? Or are you newly responsible for safety matters in a CERN building? Perhaps you're simply interested in how to make the working environment safer for yourself and your colleagues. Whatever the case, a new information campaign launched by TIS this week can help. The most visible aspects of the new campaign will be posters distributed around the Laboratory treating a different subject each month. The Web site - http://safety.cern.ch/ - which provides all safety related information. But these are not the only aspects of the new campaign. Members of the TIS/GS group, whose contact details can be found on the safety web site, are available to give information and advice on a one-to-one basis at any time. The campaign's launch has been timed to coincide with European Safety Week, organized by the European Agency for Safety and Health at Work and the subject treated in the first posters is safety inspection. This particular topic only concerns thos...

A Guide to Laser Safety

Energy Technology Data Exchange (ETDEWEB)

Davies, W M

1998-09-01

In one of the few volumes dedicated to laser safety to appear since the 'bible' of Sliney and Wolbarsht, Roy Henderson sets out to provide the reader with a practical account of both the philosophy and practice across contemporary application of lasers. The book is split into three sections. The first section is essentially a non-mathematical review of lasers, optical hazards and laser safety. It is intended as an easily digestible introduction to the subject, conveying the primary concepts of laser safety without the camouflage of equations. This piece of text is manifestly readable by all who have interest in the topic. The second section introduces more meat onto the bones introduced in the first section and some of the practical mathematics necessary to determine optical irradiance in simple laser beams. The book is not intended as a scientific treatise and rigorous treatment of laser physics is left (for the better) to other texts. Laser hazard assessment and safety management are covered in sufficient detail to allow the reader to understand what precautions are necessary to mitigate the risks of laser use. The final section takes a brief look at laser safety in a number of specific industrial applications. These include industrial processing, medicine, telecommunications and entertainment. These should be taken in the context of the second section and are not stand-alone text. With few typographical errors, and packed with practical hints, this book serves as an excellent text for any educational course on laser safety and provides a quick and easy reference for laser safety officers. (book review: A Roy Henderson - ISBN: 0 412 72940 7)

Food and drinking water safety: Can risk assessment help us to get our priorities right?

International Nuclear Information System (INIS)

Denner, W.H.B.

1992-01-01

responsibility for controlling food-related risks today and to ask whether a more formalized approach to risk assessment could help to get priorities right. Food safety is not a new subject and it is worth examining history first before going on to look at some current issues and then attempting to draw some more general conclusions

Food and drinking water safety: Can risk assessment help us to get our priorities right?

Energy Technology Data Exchange (ETDEWEB)

Denner, W H.B. [Ministry of Agriculture, Fisheries and Food, London (United Kingdom)

1992-07-01

responsibility for controlling food-related risks today and to ask whether a more formalized approach to risk assessment could help to get priorities right. Food safety is not a new subject and it is worth examining history first before going on to look at some current issues and then attempting to draw some more general conclusions.

Validation of nuclear criticality safety software and 27 energy group ENDF/B-IV cross sections. Revision 1

International Nuclear Information System (INIS)

Lee, B.L. Jr.; D'Aquila, D.M.

1996-01-01

The original validation report, POEF-T-3636, was documented in August 1994. The document was based on calculations that were executed during June through August 1992. The statistical analyses in Appendix C and Appendix D were completed in October 1993. This revision is written to clarify the margin of safety being used at Portsmouth for nuclear criticality safety calculations. This validation gives Portsmouth NCS personnel a basis for performing computerized KENO V.a calculations using the Lockheed Martin Nuclear Criticality Safety Software. The first portion of the document outlines basic information in regard to validation of NCSS using ENDF/B-IV 27-group cross sections on the IBM3090 at ORNL. A basic discussion of the NCSS system is provided, some discussion on the validation database and validation in general. Then follows a detailed description of the statistical analysis which was applied. The results of this validation indicate that the NCSS software may be used with confidence for criticality calculations at the Portsmouth Gaseous Diffusion Plant. For calculations of Portsmouth systems using the specified codes and systems covered by this validation, a maximum k eff including 2σ of 0.9605 or lower shall be considered as subcritical to ensure a calculational margin of safety of 0.02. The validation of NCSS on the IBM 3090 at ORNL was extended to include NCSS on the IBM 3090 at K-25

7 CFR 1724.55 - Dam safety.

Science.gov (United States)

2010-01-01

... 7 Agriculture 11 2010-01-01 2010-01-01 false Dam safety. 1724.55 Section 1724.55 Agriculture... § 1724.55 Dam safety. (a) The provisions of this section apply only to RUS financed electric system... for Dam Safety,”(Guidelines), as applicable. A dam, as more fully defined in the Guidelines, is...

14 CFR 1274.934 - Safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Safety. 1274.934 Section 1274.934... FIRMS Other Provisions and Special Conditions § 1274.934 Safety. Safety July 2002 NASA's safety priority... shall act responsibly in matters of safety and shall take all reasonable safety measures in performing...

Nurse Level of Education, Quality of Care and Patient Safety in the Medical and Surgical Wards in Malaysian Private Hospitals: A Cross-sectional Study.

Science.gov (United States)

Abdul Rahman, Hamzah; Jarrar, Mu'taman; Don, Mohammad Sobri

2015-04-23

Nursing knowledge and skills are required to sustain quality of care and patient safety. The numbers of nurses with Bachelor degrees in Malaysia are very limited. This study aims to predict the impact of nurse level of education on quality of care and patient safety in the medical and surgical wards in Malaysian private hospitals. A cross-sectional survey by questionnaire was conducted. A total 652 nurses working in the medical and surgical wards in 12 private hospitals were participated in the study. Multistage stratified simple random sampling performed to invite nurses working in small size (less than 100 beds), medium size (100-199 beds) and large size (over than 200) hospitals to participate in the study. This allowed nurses from all shifts to participate in this study. Nurses with higher education were not significantly associated with both quality of care and patient safety. However, a total 355 (60.9%) of respondents participated in this study were working in teaching hospitals. Teaching hospitals offer training for all newly appointed staff. They also provide general orientation programs and training to outline the policies, procedures of the nurses' roles and responsibilities. This made the variances between the Bachelor and Diploma nurses not significantly associated with the outcomes of care. Nursing educational level was not associated with the outcomes of care in Malaysian private hospitals. However, training programs and the general nursing orientation programs for nurses in Malaysia can help to upgrade the Diploma-level nurses. Training programs can increase their self confidence, knowledge, critical thinking ability and improve their interpersonal skills. So, it can be concluded that better education and training for a medical and surgical wards' nurses is required for satisfying client expectations and sustaining the outcomes of patient care.

9 CFR 113.39 - Cat safety tests.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Cat safety tests. 113.39 Section 113... Procedures § 113.39 Cat safety tests. The safety tests provided in this section shall be conducted when... recommended for use in cats. (a) The cat safety test provided in this paragraph shall be used when the Master...

Mental and Emotional Self-Help Technology Apps: Cross-Sectional Study of Theory, Technology, and Mental Health Behaviors.

Science.gov (United States)

Crookston, Benjamin T; West, Joshua H; Hall, P Cougar; Dahle, Kaitana Martinez; Heaton, Thomas L; Beck, Robin N; Muralidharan, Chandni

2017-10-17

Mental and emotional self-help apps have emerged as potential mental illness prevention and treatment tools. The health behavior theory mechanisms by which these apps influence mental health-related behavior change have not been thoroughly examined. The objective of this study was to examine the association between theoretical behavior change mechanisms and use of mental and emotional self-help apps and whether the use of such apps is associated with mental health behaviors. This study utilized a cross-sectional survey of 150 users of mental or emotional health apps in the past 6 months. Survey questions included theory-based items, app engagement and likeability items, and behavior change items. Stata version 14 was used to calculate all statistics. Descriptive statistics were calculated for each of the demographic, theory, engagement, and behavior variables. Multiple regression analysis was used to identify factors associated with reported changes in theory and separately for reported changes in actual behavior after controlling for potentially confounding variables. Participants reported that app use increased their motivation, desire to set goals, confidence, control, and intentions to be mentally and emotionally healthy. Engagement (Ptheory items, whereas perceived behavior change was positively associated with theory (Ptheory items. Future efforts should consider the value of impacting key theoretical constructs when designing mental and emotional health apps. As apps are evaluated and additional theory-based apps are created, cost-effective self-help apps may become common preventative and treatment tools in the mental health field. ©Benjamin T Crookston, Joshua H West, P Cougar Hall, Kaitana Martinez Dahle, Thomas L Heaton, Robin N Beck, Chandni Muralidharan. Originally published in JMIR Mental Health (http://mental.jmir.org), 17.10.2017.

Partial Safety Factors for Rubble Mound Breakwaters

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard; Burcharth, H. F.; Christiani, E.

1995-01-01

On the basis of the failure modes formulated in the various subtasks calibration of partial safety factors are described in this paper. The partial safety factors can be used to design breakwaters under quite different design conditions, namely probabilities of failure from 0.01 to 0.4, design...... lifetimes from 20 to 100 years and different qualities of wave data. A code of practice where safety is taken into account using partial safety factors is called a level I code. The partial safety factors are calibrated using First Order Reliability Methods (FORM, see Madsen et al. [1]) where...... in section 3. First Order Reliability Methods are described in section 4, and in section 5 it is shown how partial safety factors can be introduced and calibrated. The format of a code for design and analysis of rubble mound breakwaters is discussed in section 6. The mathematical formulation of the limit...

Trends in non-help-seeking for mental disorders in Germany between 1997-1999 and 2009-2012: a repeated cross-sectional study.

Science.gov (United States)

Brandstetter, Susanne; Dodoo-Schittko, Frank; Speerforck, Sven; Apfelbacher, Christian; Grabe, Hans-Jörgen; Jacobi, Frank; Hapke, Ulfert; Schomerus, Georg; Baumeister, Sebastian E

2017-08-01

This study sought to examine trends in non-help-seeking for mental disorders among persons with a prevalent mental disorder (12-month prevalence) in Germany between 1997-1999 and 2009-2012. We examined data from 1909 persons aged 18-65 years who participated in two independent, repeated cross-sectional surveys (German National Interview and Examination Study 1997-1999, German Health Interview and Examination Survey for Adults 2009-2012) conducted 12 years apart. Prevalent mental disorders (12-month prevalence) were determined using the Composite International Diagnostic Interview, which included information on lifetime help-seeking for mental health problems. Correlates of self-reported help-seeking were analyzed according to Andersen's Behavioral Model. Multivariable Poisson regression models were used to assess time trends in the directly standardized and model-adjusted prevalence of non-help-seeking across strata of socio-economic and clinical variables. The proportion of people with a prevalent mental disorder who have never sought help in their lifetime decreased significantly from 62% (95% CI 58.7-64.7) to 57% (95% CI 52.2-60.9) between 1997-1999 and 2009-2012 in adults aged 18-65 years in Germany. Downward trends in non-help-seeking occurred in all investigated strata and reached statistical significance in women, in people who were living alone, people with medium educational level, people living in middle-sized communities, people with non-statutory health insurance, smokers, and people with co-existing somatic conditions. Despite a downward trend over the course of 12 years, a large proportion of people suffering from mental disorders are still not seeking treatment in Germany. Further efforts to increase uptake of help-seeking for mental disorders in hard-to-reach groups are warranted to continue this trend.

New Improved Nuclear Data for Nuclear Criticality and Safety

International Nuclear Information System (INIS)

Guber, Klaus H.; Leal, Luiz C.; Lampoudis, C.; Kopecky, S.; Schillebeeckx, P.; Emiliani, F.; Wynants, R.; Siegler, P.

2011-01-01

The Geel Electron Linear Accelerator (GELINA) was used to measure neutron total and capture cross sections of 182,183,184,186 W and 63,65 Cu in the energy range from 100 eV to ∼200 keV using the time-of-flight method. GELINA is the only high-power white neutron source with excellent timing resolution and ideally suited for these experiments. Concerns about the use of existing cross-section data in nuclear criticality calculations using Monte Carlo codes and benchmarks were a prime motivator for the new cross-section measurements. To support the Nuclear Criticality Safety Program, neutron cross-section measurements were initiated using GELINA at the EC-JRC-IRMM. Concerns about data deficiencies in some existing cross-section evaluations from libraries such as ENDF/B, JEFF, or JENDL for nuclear criticality calculations were the prime motivator for new cross-section measurements. Over the past years many troubles with existing nuclear data have emerged, such as problems related to proper normalization, neutron sensitivity backgrounds, poorly characterized samples, and use of improper pulse-height weighting functions. These deficiencies may occur in the resolved- and unresolved-resonance region and may lead to erroneous nuclear criticality calculations. An example is the use of the evaluated neutron cross-section data for tungsten in nuclear criticality safety calculations, which exhibit discrepancies in benchmark calculations and show the need for reliable covariance data. We measured the neutron total and capture cross sections of 182,183,184,186 W and 63,65 Cu in the neutron energy range from 100 eV to several hundred keV. This will help to improve the representation of the cross sections since most of the available evaluated data rely only on old measurements. Usually these measurements were done with poor experimental resolution or only over a very limited energy range, which is insufficient for the current application.

CSRL-V: processed ENDF/B-V 227-neutron-group and pointwise cross-section libraries for criticality safety, reactor, and shielding studies

International Nuclear Information System (INIS)

Ford, W.E. III; Diggs, B.R.; Petrie, L.M.; Webster, C.C.; Westfall, R.M.

1982-01-01

A P 3 227-neutron-group cross-section library has been processed for the subsequent generation of problem-dependent fine- or broad-group cross sections for a broad range of applications, including shipping cask calculations, general criticality safety analyses, and reactor core and shielding analyses. The energy group structure covers the range 10 -5 eV - 20 MeV, including 79 thermal groups below 3 eV. The 129-material library includes processed data for all materials in the ENDF/B-V General Purpose File, several data sets prepared from LENDL data, hydrogen with water- and polyethyelene-bound thermal kernels, deuterium with C 2 O-bound thermal kernels, carbon with a graphite thermal kernel, a special 1/V data set, and a dose factor data set. The library, which is in AMPX master format, is designated CSRL-V (Criticality Safety Reference Library based on ENDF/B-V data). Also included in CSRL-V is a pointwise total, fission, elastic scattering, and (n,γ) cross-section library containing data sets for all ENDF/B-V resonance materials. Data in the pointwise library were processed with the infinite dilute approximation at a temperature of 296 0 K

Safety assessment of emergency power systems for nuclear power plants

International Nuclear Information System (INIS)

1992-01-01

This publication is intended to assist the safety assessor within a regulatory body, or one working as a consultant, in assessing the safety of a given design of the emergency power systems (EPS) for a nuclear power plant. The present publication refers closely to the NUSS Safety Guide 50-SG-D7 (Rev. 1), Emergency Power Systems at Nuclear Power Plants. It covers therefore exactly the same technical subject as that Safety Guide. In view of its objective, however, it attempts to help in the evaluation of possible technical solutions which are intended to fulfill the safety requirements. Section 2 clarifies the scope further by giving an outline of the assessment steps in the licensing process. After a general outline of the assessment process in relation to the licensing of a nuclear power plant, the publication is divided into two parts. First, all safety issues are presented in the form of questions that have to be answered in order for the assessor to be confident of a safe design. The second part presents the same topics in tabulated form, listing the required documentation which the assessor has to consult and those international and national technical standards pertinent to the topics. An extensive reference list provides information on standards. 1 tab

Environmental, health, and safety issues of sodium-sulfur batteries for electric and hybrid vehicles

Energy Technology Data Exchange (ETDEWEB)

Ohi, J.M.

1992-09-01

This report is the first of four volumes that identify and assess the environmental, health, and safety issues involved in using sodium-sulfur (Na/S) battery technology as the energy source in electric and hybrid vehicles that may affect the commercialization of Na/S batteries. This and the other reports on recycling, shipping, and vehicle safety are intended to help the Electric and Hybrid Propulsion Division of the Office of Transportation Technologies in the US Department of Energy (DOE/EHP) determine the direction of its research, development, and demonstration (RD D) program for Na/S battery technology. The reports review the status of Na/S battery RD D and identify potential hazards and risks that may require additional research or that may affect the design and use of Na/S batteries. This volume covers cell design and engineering as the basis of safety for Na/S batteries and describes and assesses the potential chemical, electrical, and thermal hazards and risks of Na/S cells and batteries as well as the RD D performed, under way, or to address these hazards and risks. The report is based on a review of the literature and on discussions with experts at DOE, national laboratories and agencies, universities, and private industry. Subsequent volumes will address environmental, health, and safety issues involved in shipping cells and batteries, using batteries to propel electric vehicles, and recycling and disposing of spent batteries. The remainder of this volume is divided into two major sections on safety at the cell and battery levels. The section on Na/S cells describes major component and potential failure modes, design, life testing and failure testing, thermal cycling, and the safety status of Na/S cells. The section on batteries describes battery design, testing, and safety status. Additional EH S information on Na/S batteries is provided in the appendices.

14 CFR 31.25 - Factor of safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Factor of safety. 31.25 Section 31.25... STANDARDS: MANNED FREE BALLOONS Strength Requirements § 31.25 Factor of safety. (a) Except as specified in paragraphs (b) and (c) of this section, the factor of safety is 1.5. (b) A factor of safety of at least five...

A cross-sectional study to assess the patient safety culture in the Palestinian hospitals: a baseline assessment for quality improvement.

Science.gov (United States)

Elsous, Aymen; Akbari Sari, Ali; Rashidian, Arash; Aljeesh, Yousef; Radwan, Mahmoud; AbuZaydeh, Hatem

2016-12-01

To measure and establish a baseline assessment of the patient safety culture in the Palestinian hospitals. A cross-sectional descriptive study using the Arabic version of the Safety Attitude Questionnaire (Short Form 2006). A total of 339 nurses and physicians returned the questionnaire out of 370 achieving a response rate of 91.6%. Four public general hospitals in the Gaza Strip, Palestine. Nurses and physicians were randomly selected using a proportionate random sampling. Data analysis performed using Statistical Package for the Social Sciences software version 20, and p value less than 0.05 was statistically significant. Current status of patient safety culture among healthcare providers and percentage of positive attitudes. Male to female ratio was 2.16:1, and mean age was 36.5 ± 9.4 years. The mean score of Arabic Safety Attitude Questionnaire across the six dimensions on 100-point scale ranged between 68.5 for Job Satisfaction and 48.5 for Working Condition. The percentage of respondents holding a positive attitude was 34.5% for Teamwork Climate, 28.4% for Safety Climate, 40.7% for Stress Recognition, 48.8% for Job Satisfaction, 11.3% for Working Conditions and 42.8% for Perception of Management. Healthcare workers holding positive attitudes had better collaboration with co-workers than those without positive attitudes. Findings are useful to formulate a policy on patient safety culture and targeted a specific safety culture dimension to improve the safety of patients and improve the clinical outcomes within healthcare organisations.

Pursuing for the case of safety

Energy Technology Data Exchange (ETDEWEB)

Hansen, H; Salaber, A [Geco-Prakla, Paris (France); Myers, S [Sedco Forex, Montrouge (France); Redd, E [Sedco Forex, Aberdeen (United Kingdom); Shannon, R [Anadrill HSE, London (United Kingdom)

1993-01-01

Ever since the Piper Alpha disaster, safety has become one of the industry's hottest issues. Attention to safety leads to improved communication within organizations as well as between operators and contractors, and ultimately to more efficient operations. In this article descriptions are given of safety management systems, the safety-case philosophy and legislative changes hat are helping promote these new safety tools. 6 figs., 4 ills., 3 refs.

Pursuing for the case of safety

Energy Technology Data Exchange (ETDEWEB)

Hansen, H.; Salaber, A. (Geco-Prakla, Paris (France)); Myers, S. (Sedco Forex, Montrouge (France)); Redd, E. (Sedco Forex, Aberdeen (United Kingdom)); Shannon, R. (Anadrill HSE, London (United Kingdom))

1993-01-01

Ever since the Piper Alpha disaster, safety has become one of the industry's hottest issues. Attention to safety leads to improved communication within organizations as well as between operators and contractors, and ultimately to more efficient operations. In this article descriptions are given of safety management systems, the safety-case philosophy and legislative changes hat are helping promote these new safety tools. 6 figs., 4 ills., 3 refs.

Tools for road infrastructure safety management in poland

Directory of Open Access Journals (Sweden)

Kustra Wojciech

2017-01-01

Full Text Available Road safety can be improved by implementing principles of road safety infrastructure management (RIS on the network of European roads as adopted in the Directive. The document recommends that member states should use tried and tested tools for road safety management such as: road safety impact assessment (RIA, road safety audit (RSA, safety management on existing road networks including road safety ranking (RSM and road safety inspection (RSI. The objective of the methods is to help road authorities to take rational decisions in the area of road safety and road infrastructure safety and understand the consequences occurring in the particular phases of road life cycle. To help with assessing the impact of a road project on the safety of related roads, a method was developed for long-term forecasts of accidents and accident cost estimation as well as a risk classification to identify risks that are not acceptable risks. With regard to road safety audits and road safety inspection, a set of principles was developed to identify risks and the basic classification of mistakes and omissions.

Predictors of need for help with weight loss among overweight and obese men and women in the Netherlands: a cross-sectional study.

Science.gov (United States)

Bunt, S N W; Mérelle, S Y M; Steenhuis, I H M; Kroeze, W

2017-12-12

Need for help is perceived as an important first step towards weight related health-care use among overweight and obese individuals and several studies have reported gender as an important predisposing characteristic of need for help. Therefore, the goal of the current study is to gain insight into factors that might determine need for help for weight loss in men and women. In the current study, data from the Dutch cross-sectional survey Health Monitor 2012 was used. Overweight and obese men (N = 2218) and women (N = 2002) aged 19-64 years were selected for the current study. Potential predictors of need for help were age, ethnicity, marital status, educational level, perceived health, weight status, comorbidities, physical activity level, and income. Multiple logistic regression analyses were conducted separately among men and women to establish prediction models of need for help for weight loss. The mean age of the adult women in this study population was 47.7 years and 68% was medium educated, whereas the mean age of men was 49.0 years and 63.0% was medium educated. Of the respondents, 24.9% indicated they either felt a need for help for weight loss, 6.4% already received help and 68.7% felt no need for help. Women were more likely to indicate a need for help than men (OR = 2.17). Among both genders, need for help was significantly predicted by obesity (OR men  = 3.80, OR women  = 2.20) and "poor" perceived health (ORmen = 2.14, OR women  = 1.94). Besides, "unmarried" (OR men  = 1.57) and suffering from comorbidities (OR men  = 1.26) predicted need for help among men. Whereas among women, need for help was predicted by younger age (i.e. 19-34 years (OR women  = 2.07) and 35-49 years (OR women  = 1.35)). The current study revealed specific predictors of need for help for weight loss for men and women. Among men, the strongest predictors were obesity and poor perceived health, whereas among women need for help was

Safety first!

CERN Multimedia

2016-01-01

Among the many duties I assumed at the beginning of the year was the ultimate responsibility for Safety at CERN: the responsibility for the physical safety of the personnel, the responsibility for the safe operation of the facilities, and the responsibility to ensure that CERN acts in accordance with the highest standards of radiation and environmental protection.   The Safety Policy document drawn up in September 2014 is an excellent basis for the implementation of Safety in all areas of CERN’s work. I am happy to commit during my mandate to help meet its objectives, not least by ensuring the Organization makes available the necessary means to achieve its Safety objectives. One of the main objectives of the HSE (Occupational Health and Safety and Environmental Protection) unit in the coming months is to enhance the measures to minimise CERN’s impact on the environment. I believe CERN should become a role model for an environmentally-aware scientific research laboratory. Risk ...

H. W. Laboratory manual: 100 Area section

Energy Technology Data Exchange (ETDEWEB)

1950-07-01

The purpose of this manual is to present a Hazard Breakdown of all jobs normally encountered in the laboratory work of the three sections comprising the Analytic Section, Metallurgy and Control Division of the Technical Department. A Hazard Breakdown is a careful analysis of any job in which the source of possible dangers is clearly indicated for each particular step. The analysis is prepared by individuals who are thoroughly familiar with the specific job or procedure. It is felt that if the hazards herein outlined are recognized by the Laboratory personnel and the suggested safety cautions followed, the chance for injury will be minimized and the worker will become generally more safety conscious. The manual, which is prefaced by the general safety rules applying to all the laboratories, is divided into three main sections, one for each of the three sections into which the Laboratories Division is divided. These sections are as follows: Section 1 -- 200 Area Control; Section 2 -- 100 Area Control; Section 3 -- 300 Area Control, Essential Materials, and Methods Improvement.

14 CFR 1260.37 - Safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Safety. 1260.37 Section 1260.37 Aeronautics... Provisions § 1260.37 Safety. Safety October 2000 (a) The Recipient shall act responsibly in matters of safety and shall take all reasonable safety measures in performing under this grant or cooperative agreement...

Perceived organizational support for safety and employee safety voice: the mediating role of coworker support for safety.

Science.gov (United States)

Tucker, Sean; Chmiel, Nik; Turner, Nick; Hershcovis, M Sandy; Stride, Chris B

2008-10-01

In the present study, we modeled 2 sources of safety support (perceived organizational support for safety and perceived coworker support for safety) as predictors of employee safety voice, that is, speaking out in an attempt to change unsafe working conditions. Drawing on social exchange and social impact theories, we hypothesized and tested a mediated model predicting employee safety voice using a cross-sectional survey of urban bus drivers (n = 213) in the United Kingdom. Hierarchical regression analysis showed that perceived coworker support for safety fully mediated the relationship between perceived organizational support for safety and employee safety voice. This study adds to the employee voice literature by evaluating the important role that coworkers can play in encouraging others to speak out about safety issues. Implications for research and practice related to change-oriented safety communication are discussed.

Development and conceptual validation of a questionnaire to help contraceptive choice: CHLOE (Contraception: HeLping for wOmen's choicE).

Science.gov (United States)

Jamin, Christian Georges; Häusler, Gunther; Lobo Abascal, Paloma; Fiala, Christian; Lete Lasa, Luis Ignacio; Nappi, Rossella Elena; Micheletti, Marie-Christine; Fernández-Dorado, Ana; Pintiaux, Axelle; Chabbert-Buffet, Natalie

2017-08-01

The aim of this research was to develop a questionnaire to facilitate choice of the most appropriate contraceptive method for individual women. A literature review was conducted to identify key aspects influencing contraceptive choice and inform development of a questionnaire for online completion. Questionnaire development was overseen by a steering committee consisting of eight gynaecologists from across Europe. The initial draft underwent conceptual validation through cognitive debriefing interviews with six native English-speaking women. A qualitative content analysis was conducted to accurately identify potential issues and areas for questionnaire improvement. A revised version of the questionnaire then underwent face-to-face and online evaluation by 115 international gynaecologists/obstetricians with expertise in contraception, prior to development of a final version. The final conceptually validated Contraception: HeLping for wOmen's choicE (CHLOE) questionnaire takes ≤10 min to complete and includes three sections to elicit general information about the individual, the health conditions that might influence contraceptive choice, and the woman's needs and preferences that might influence contraceptive choice. The questionnaire captures the core aspects of personalisation, efficacy and safety, identified as key attributes influencing contraceptive choice, and consists of 24 closed-ended questions for online completion prior to a health care provider (HCP) consultation. The HCP receives a summary of the responses. The CHLOE questionnaire has been developed to help women choose the contraception that best suits their needs and situation while optimising the HCP's time.

Documentation of pediatric drug safety in manufacturers' product monographs: a cross-sectional evaluation of the canadian compendium of pharmaceuticals and specialities.

Science.gov (United States)

Uppal, Navjeet K; Dupuis, Lee L; Parshuram, Christopher S

2008-01-01

To describe the provision of pediatric drug safety information in a national formulary of manufacturers' drug product monographs. We performed a cross-sectional evaluation of comprehensive product monographs contained in the 2005 Canadian Compendium of Pharmaceuticals and Specialities (CPS). We abstracted data describing indications for prescription, statements about pediatric safety, available preparations, and provision of dosing guidelines. For each monograph we classified pediatric safety data as either present, present but limited or absent. We then described the pediatric safety data in CPS monographs for drugs listed in the published formulary of the Hospital for Sick Children, Toronto, Ontario, Canada. A total of 2232 product monographs were screened; 684 were excluded and 1548 (66%) were further analyzed. 1462 (94%) had indications that did not exclude children. Pediatric safety information was present in 592 (38%), present but limited in 148 (10%), and absent in 808 (52%) drug monographs. Safety statements were absent in 224 (14%) drug monographs that provided both dosing guidelines and formulations suitable for administration to children, and in 214 (52%) of 411 drugs in the pediatric hospital formulary. We evaluated a widely available national source of pediatric prescribing information. Safety data for children was not mentioned in more than half of the product monographs. Moreover, the provision of safety data was discordant with indications for prescription, the availability of pediatric formulations, and dosing guidelines within the monographs, and with inclusion in a pediatric hospital formulary. Our study suggests that the presentation of pediatric safety data in drug product monographs can be improved to better inform prescribing and to optimize pharmacotherapy in children.

Stepping Up Occupational Safety and Health Through Employee Participation.

Science.gov (United States)

Vaughan, Gary R.

1986-01-01

The effectiveness of the Occupational Safety and Health Act of 1970 is examined, and it is suggested that employee participation could help improve occupational safety and health in the future, through safety committees, safety circles, safety teams, and individual participation. (MSE)

14 CFR 417.109 - Ground safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Ground safety. 417.109 Section 417.109... TRANSPORTATION LICENSING LAUNCH SAFETY Launch Safety Responsibilities § 417.109 Ground safety. (a) Ground safety... 417.115(c), and subpart E of this part provide launch operator ground safety requirements. ...

Safety of Nuclear Power Plants: Commissioning and Operation

International Nuclear Information System (INIS)

2011-01-01

publication deals with the safe commissioning and operation of a nuclear power plant. It covers commissioning and operation up to the removal of nuclear fuel from the plant, including maintenance and modifications made throughout the lifetime of the plant. It covers the preparation for decommissioning but not the decommissioning phase itself. The publication also establishes additional requirements relating only to commissioning. Normal operation and anticipated operational occurrences as well as accident conditions are taken into account. This publication follows the relationship between principles and objectives for safety, and safety requirements and criteria. Section 2 elaborates on the safety objective and safety principles, which form the basis for deriving the safety requirements that must be met in the operation of a nuclear power plant. Sections 3-9 establish safety requirements under a series of individually numbered overarching requirements. Section 3 establishes the requirements to be applied for the management and organizational structure of the operating organization. Section 4 establishes the requirements for the management of operational safety, while Section 5 establishes the requirements for operational safety programmes. Section 6 establishes the requirements for plant commissioning. Section 7 establishes the requirements for plant operations. Section 8 establishes the requirements for maintenance, testing, surveillance and inspection. Section 9 establishes the requirements for preparation for decommissioning. The requirements are mainly applicable to water cooled reactors, but they may also be used as a basis for establishing specific requirements for other reactor designs.

Safety at your service

CERN Multimedia

Antonella Del Rosso

2014-01-01

You might think that only twelve people to man twelve different services, each needing several people could be a problem. Not for the DGS-SEE-SV Section! We can now reveal their magic formula.   From risk management to prevention and follow-up of accidents, from safety training to hunting for pollutants in buildings and providing safety input for calls for tenders, the DGS-SEE-SV’s services underpin virtually every aspect of CERN’s daily life. “The section was set up in 2011 to meet the Organization's needs more effectively", explains François Angerand, head of the DGS-SEE-SV section. "For some activities, such as providing safety input for calls for tenders, our Section acts as an interface between the Departments and all the other services of the HSE Unit. In other cases, we ourselves provide direct support to the Departments.” “Safety” is synonymous with “prevention”: the DGS-...

9 CFR 113.33 - Mouse safety tests.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Mouse safety tests. 113.33 Section 113.33 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... Procedures § 113.33 Mouse safety tests. One of the mouse safety tests provided in this section shall be...

Safety critical systems handbook a straightforward guide to functional safety : IEC 61508 (2010 edition) and related standards

CERN Document Server

Smith, David J

2010-01-01

Electrical, electronic and programmable electronic systems increasingly carry out safety functions to guard workers and the public against injury or death and the environment against pollution. The international functional safety standard IEC 61508 was revised in 2010, and this is the first comprehensive guide available to the revised standard. As functional safety is applicable to many industries, this book will have a wide readership beyond the chemical and process sector, including oil and gas, power generation, nuclear, aircraft, and automotive industries, plus project, instrumentation, design, and control engineers. * The only comprehensive guide to IEC 61508, updated to cover the 2010 amendments, that will ensure engineers are compliant with the latest process safety systems design and operation standards* Helps readers understand the process required to apply safety critical systems standards* Real-world approach helps users to interpret the standard, with case studies and best practice design examples...

Safety assessment for facilities and activities. General safety requirements. Pt. 4

International Nuclear Information System (INIS)

2009-01-01

) Facilities where the mining and processing of radioactive ores (such as ores of uranium and thorium) are carried out. 'Activities' includes: (a) production, use, import and export of radiation sources for industrial, research, medical and other purposes; (b) transport of radioactive material; (c) decommissioning and dismantling of facilities and the closure of repositories for radioactive waste; (d) close-out of facilities where the mining and processing of radioactive ore was carried out; (e) activities for radioactive waste management such as the discharge of effluents; (f) remediation of sites affected by residues from past activities. Safety assessment plays an important role throughout the lifetime of the facility or activity whenever decisions on safety issues are made by the designers, the constructors, the manufacturers, the operating organization or the regulatory body. Stages in the lifetime of a facility or activity where a safety assessment is carried out, updated and used by the designers, the operating organization and the regulatory body include: (a) site evaluation for the facility or activity; (b) development of the design; (c) construction of the facility or implementation of the activity; (d) commissioning of the facility or activity; (e) commencement of operation of the facility or conduct of the activity; (f) normal operation of the facility or normal conduct of the activity; (g) modification of the design or operation; (h) periodic safety reviews;(i) life extension of the facility beyond its original design life; (j) changes in ownership or management of the facility; (k) decommissioning and dismantling of a facility; (l) closure of a repository for the disposal of radioactive waste and the post-closure phase; (m) remediation of a site and release from regulatory control. The publication is structured as follows: An introduction is followed by Section 2 which provides the basis for requiring a safety assessment to be carried out, derived from the

Safety Assessment for Facilities and Activities. General Safety Requirements. Pt. 4

International Nuclear Information System (INIS)

2009-01-01

) Facilities where the mining and processing of radioactive ores (such as ores of uranium and thorium) are carried out. 'Activities' includes: (a) production, use, import and export of radiation sources for industrial, research, medical and other purposes; (b) transport of radioactive material; (c) decommissioning and dismantling of facilities and the closure of repositories for radioactive waste; (d) close-out of facilities where the mining and processing of radioactive ore was carried out; (e) activities for radioactive waste management such as the discharge of effluents; (f) remediation of sites affected by residues from past activities. Safety assessment plays an important role throughout the lifetime of the facility or activity whenever decisions on safety issues are made by the designers, the constructors, the manufacturers, the operating organization or the regulatory body. Stages in the lifetime of a facility or activity where a safety assessment is carried out, updated and used by the designers, the operating organization and the regulatory body include: (a) site evaluation for the facility or activity; (b) development of the design; (c) construction of the facility or implementation of the activity; (d) commissioning of the facility or activity; (e) commencement of operation of the facility or conduct of the activity; (f) normal operation of the facility or normal conduct of the activity; (g) modification of the design or operation; (h) periodic safety reviews; (i) life extension of the facility beyond its original design life; (j) changes in ownership or management of the facility; (k) decommissioning and dismantling of a facility; (l) closure of a repository for the disposal of radioactive waste and the post-closure phase; (m) remediation of a site and release from regulatory control. The publication is structured as follows: An introduction is followed by Section 2 which provides the basis for requiring a safety assessment to be carried out, derived from the

Safety Assessment for Facilities and Activities. General Safety Requirements. Pt. 4

International Nuclear Information System (INIS)

2010-01-01

) Facilities where the mining and processing of radioactive ores (such as ores of uranium and thorium) are carried out. 'Activities' includes: (a) production, use, import and export of radiation sources for industrial, research, medical and other purposes; (b) transport of radioactive material; (c) decommissioning and dismantling of facilities and the closure of repositories for radioactive waste; (d) close-out of facilities where the mining and processing of radioactive ore was carried out; (e) activities for radioactive waste management such as the discharge of effluents; (f) remediation of sites affected by residues from past activities. Safety assessment plays an important role throughout the lifetime of the facility or activity whenever decisions on safety issues are made by the designers, the constructors, the manufacturers, the operating organization or the regulatory body. Stages in the lifetime of a facility or activity where a safety assessment is carried out, updated and used by the designers, the operating organization and the regulatory body include: (a) site evaluation for the facility or activity; (b) development of the design; (c) construction of the facility or implementation of the activity; (d) commissioning of the facility or activity; (e) commencement of operation of the facility or conduct of the activity; (f) normal operation of the facility or normal conduct of the activity; (g) modification of the design or operation; (h) periodic safety reviews; (i) life extension of the facility beyond its original design life; (j) changes in ownership or management of the facility; (k) decommissioning and dismantling of a facility; (l) closure of a repository for the disposal of radioactive waste and the post-closure phase; (m) remediation of a site and release from regulatory control. The publication is structured as follows: An introduction is followed by Section 2 which provides the basis for requiring a safety assessment to be carried out, derived from the

Safety Assessment for Facilities and Activities. General Safety Requirements. Pt. 4

International Nuclear Information System (INIS)

2009-01-01

installed; (i) Facilities where the mining and processing of radioactive ores (such as ores of uranium and thorium) are carried out. 'Activities' includes: (a) production, use, import and export of radiation sources for industrial, research, medical and other purposes; (b) transport of radioactive material; (c) decommissioning and dismantling of facilities and the closure of repositories for radioactive waste; (d) close-out of facilities where the mining and processing of radioactive ore was carried out; (e) activities for radioactive waste management such as the discharge of effluents; (f) remediation of sites affected by residues from past activities. Safety assessment plays an important role throughout the lifetime of the facility or activity whenever decisions on safety issues are made by the designers, the constructors, the manufacturers, the operating organization or the regulatory body. Stages in the lifetime of a facility or activity where a safety assessment is carried out, updated and used by the designers, the operating organization and the regulatory body include: (a) site evaluation for the facility or activity; (b) development of the design; (c) construction of the facility or implementation of the activity; (d) commissioning of the facility or activity; (e) commencement of operation of the facility or conduct of the activity; (f) normal operation of the facility or normal conduct of the activity; (g) modification of the design or operation; (h) periodic safety reviews;(i) life extension of the facility beyond its original design life; (j) changes in ownership or management of the facility; (k) decommissioning and dismantling of a facility; (l) closure of a repository for the disposal of radioactive waste and the post-closure phase; (m) remediation of a site and release from regulatory control. The publication is structured as follows: An introduction is followed by Section 2 which provides the basis for requiring a safety assessment to be carried out, derived

14 CFR 417.107 - Flight safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Flight safety. 417.107 Section 417.107... TRANSPORTATION LICENSING LAUNCH SAFETY Launch Safety Responsibilities § 417.107 Flight safety. (a) Flight safety... safety system that satisfies subpart D of this part as follows, unless § 417.125 applies. (1) In the...

9 CFR 113.40 - Dog safety tests.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Dog safety tests. 113.40 Section 113... Procedures § 113.40 Dog safety tests. The safety tests provided in this section shall be conducted when... recommended for use in dogs. Serials which are not found to be satisfactory when tested pursuant to the...

Self-reported confidence in patient safety knowledge among Australian undergraduate nursing students: A multi-site cross-sectional survey study.

Science.gov (United States)

Usher, Kim; Woods, Cindy; Parmenter, Glenda; Hutchinson, Marie; Mannix, Judy; Power, Tamara; Chaboyer, Wendy; Latimer, Sharon; Mills, Jane; Siegloff, Lesley; Jackson, Debra

2017-06-01

Patient safety is critical to the provision of quality health care and thus is an essential component of nurse education. To describe first, second and third year Australian undergraduate nursing students' confidence in patient safety knowledge acquired in the classroom and clinical settings across the three years of the undergraduate nursing program. A cross-sectional online survey conducted in 2015. Seven Australian universities with campuses across three states (Queensland, New South Wales, South Australia). A total of 1319 Australian undergraduate nursing students. Participants were surveyed using the 31-item Health Professional Education in Patient Safety Survey (H-PEPSS). Descriptive statistics summarised the sample and survey responses. Paired t-tests, ANOVA and generalized-estimating-equations models were used to compare responses across learning settings (classroom and clinical), and year of nursing course. Participants were most confident in their learning of clinical safety skills and least confident in learning about the sociocultural dimensions of working in teams with other health professionals, managing safety risks and understanding human and environmental factors. Only 59% of students felt confident they could approach someone engaging in unsafe practice, 75% of students agreed it was difficult to question the decisions or actions of those with more authority, and 78% were concerned they would face disciplinary action if they made a serious error. One patient safety subscale, Recognising and responding to remove immediate safety risks, was rated significantly higher by third year nursing students than by first and second year students. Two broader aspects of patient safety scales, Consistency in how patient safety issues are dealt with by different preceptors, and System aspects of patient safety are well covered in our program, were rated significantly higher by first year nursing students than by second and third year students. One scale

Helping Nevada School Children Become Sun Smart

Centers for Disease Control (CDC) Podcasts

This podcast features Christine Thompson, Community Programs Manager at the Nevada Cancer Coalition, and author of a recent study detailing a school-based program to help Nevada school children establish healthy sun safety habits and decrease UV exposure. Christine answers questions about her research and what impact her what impact the program had on children's skin health.

Nurse perceptions of safety climate in Australian acute hospitals: a cross-sectional survey.

Science.gov (United States)

Soh, Sze-Ee; Morello, Renata; Rifat, Sheral; Brand, Caroline; Barker, Anna

2017-03-16

Objectives The aim of the present study was to explore nurse perceptions of safety climate in acute Australian hospitals. Methods Participants included 420 nurses who have worked on 24 acute wards from six Australian hospitals. The Safety Attitudes Questionnaire (SAQ) Short Form was used to quantify nurse perceptions of safety climate and benchmarked against international data. Generalised linear mixed models were used to explore factors that may influence safety climate. Results On average, 53.5% of nurses held positive attitudes towards job satisfaction followed by teamwork climate (50.5%). There was variability in SAQ domain scores across hospitals. The safety climate and perceptions of hospital management domains also varied across wards within a hospital. Nurses who had worked longer at a hospital were more likely to have poorer perceptions of hospital management (β=-5.2; P=0.014). Overall, nurse perceptions of safety climate appeared higher than international data. Conclusions The perceptions of nurses working in acute Victorian and New South Wales hospitals varied between hospitals as well as across wards within each hospital. This highlights the importance of surveying all hospital wards and examining the results at the ward level when implementing strategies to improve patient safety and the culture of safety in organisations. What is known about the topic? Prior studies in American nursing samples have shown that hospitals with higher levels of safety climate have a lower relative incidence of preventable patient complications and adverse events. Developing a culture of safety in hospitals may be useful in targeting efforts to improve patient safety. What does this paper add? This paper has shown that the perceptions of safety climate among nurses working in acute Australian hospitals varied between hospitals and across wards within a hospital. Only half the nurses also reported positive attitudes towards job satisfaction and teamwork climate. What are

Transient analysis for resolving safety issues

International Nuclear Information System (INIS)

Chao, J.; Layman, W.

1987-01-01

The Nuclear Safety Analysis Center (NSAC) has a Generic Safety Analysis Program to help resolve high priority generic safety issues. This paper describes several high priority safety issues considered at NSAC and how they were resolved by transient analysis using thermal hydraulics and neutronics codes. These issues are pressurized thermal shock (PTS), anticipated transients without scram (ATWS), steam generator tube rupture (SGTR), and reactivity transients in light of the Chernobyl accident

33 CFR 165.20 - Safety zones.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety zones. 165.20 Section 165... WATERWAYS SAFETY REGULATED NAVIGATION AREAS AND LIMITED ACCESS AREAS Safety Zones § 165.20 Safety zones. A Safety Zone is a water area, shore area, or water and shore area to which, for safety or environmental...

Safety on the Job. Some Guidelines for Working Safely. Instructor's Edition.

Science.gov (United States)

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This teacher's guide was developed to help teachers (especially in Oklahoma) promote safe practices on the job. As a supplement to existing programs in the requirements for job safety, this book can also promote same basic safety attitudes and help support basic safety concepts, with an emphasis on accident prevention. The guide contains eight…

49 CFR 229.109 - Safety valves.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Safety valves. 229.109 Section 229.109..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Steam Generators § 229.109 Safety valves. Every steam generator shall be equipped with at least two safety valves that have a...

Risks of drowning and safety concerns at the beaches of Karachi--perspective from lifeguards.

Science.gov (United States)

Shaikh, Masood Ali

2014-05-01

Going to beaches is a popular pastime for many people in Karachi. Lifeguards have been deployed on many beaches for the safety and protection of beachgoers. This cross-sectional survey was conducted to study the opinions and experiences of lifeguards posted at eight beaches of Karachi. Ignorance among beachgoers about how dangerous it could be at seaside, was reported by 19 (61.3%) out of 31 lifeguards interviewed. Lifeguards had to put up with verbal and physical abuse while discharging their duties, with verbal abuse being the universal experience. Improved record keeping of drowning and near-drowning data would help make better evidence-informed beach-safety decisions in Karachi for reducing the morbidity and mortality burden owing to drowning.

Student research activities in the Technology Assessments Section of the Health and Safety Research Division, Summer 1980

Energy Technology Data Exchange (ETDEWEB)

Chester, R.O.; Roberts, D.A.

1981-08-01

Reports summarizing activities of students assigned to the Technology Assessments Section of the Health and Safety Research Division for the summer 1980 are presented. Unless indicated otherwise, each report was written by the student whose work is being described. For each student, the student's supervisor, the name of the program under which the student was brought to ORNL, the academic level of the student, and the name of the ORNL project to which the student was assigned are tabulated. The reports are presented in alphabetical order of the students' last names.

Student research activities in the Technology Assessments Section of the Health and Safety Research Division, Summer 1980

International Nuclear Information System (INIS)

Chester, R.O.; Roberts, D.A.

1981-08-01

Reports summarizing activities of students assigned to the Technology Assessments Section of the Health and Safety Research Division for the summer 1980 are presented. Unless indicated otherwise, each report was written by the student whose work is being described. For each student, the student's supervisor, the name of the program under which the student was brought to ORNL, the academic level of the student, and the name of the ORNL project to which the student was assigned are tabulated. The reports are presented in alphabetical order of the students' last names

Occupational injuries and safety measures adopted by welding workers: a cross sectional study in South India

Directory of Open Access Journals (Sweden)

Bhumika.T.V.

2014-01-01

Full Text Available Background Welders have been identified as a high risk group according to ranking of occupations based on cost related injuries. Employment of safety measures and practices among welders are potential ways of preventing occupational injuries. Adherence to these precautions is nearly universal in the developed world but there is scarcity of information about the situation in developing world including India. Objectives 1 To estimate the prevalence of occupational injuries among welding workers in Udupi district; 2 To assess the perception towards occupational hazards and the safety measures adopted by the welders Material and Methods A cross- sectional study was conducted among 160 non- industrial welding workers in Udupi district. A pre-structured interviewer-administered questionnaire was used. Results The prevalence of occupational injuries was found to be 80%. Only 24.4% of the welders had undergone professional training. Though 95% of them were aware of the importance of personal protective equipments (PPE, only 37.5% of them were regularly using PPE. Majority (75% of them reported that welding profession was dangerous. Around 79% of the workers reported carelessness being the major cause of injury during work. Working hours of less than 8 hours in a day, reading of safety manual and maintenance of equipments were significantly positively associated with occupational injuries among welding workers. Conclusion Occupational injuries during welding are preventable. The level of experience, training and attitude while working can reduce the injuries to large extent.

Occupational injuries and safety measures adopted by welding workers: a cross sectional study in South India

Directory of Open Access Journals (Sweden)

Bhumika.T.V.

2014-09-01

Full Text Available Background Welders have been identified as a high risk group according to ranking of occupations based on cost related injuries. Employment of safety measures and practices among welders are potential ways of preventing occupational injuries. Adherence to these precautions is nearly universal in the developed world but there is scarcity of information about the situation in developing world including India. Objectives 1 To estimate the prevalence of occupational injuries among welding workers in Udupi district; 2 To assess the perception towards occupational hazards and the safety measures adopted by the welders Material and Methods A cross--‐ sectional study was conducted among 160 non--‐ industrial welding workers in Udupi district. A pre--‐structured interviewer--‐administered questionnaire was used. Results The prevalence of occupational injuries was found to be 80%. Only 24.4% of the welders had undergone professional training. Though 95% of them were aware of the importance of personal protective equipments (PPE, only 37.5% of them were regularly using PPE. Majority (75% of them reported that welding profession was dangerous. Around 79% of the workers reported carelessness being the major cause of injury during work. Working hours of less than 8 hours in a day, reading of safety manual and maintenance of equipments were significantly positively associated with occupational injuries among welding workers. Conclusion Occupational injuries during welding are preventable. The level of experience, training and attitude while working can reduce the injuries to large extent.

Transportation safety training

International Nuclear Information System (INIS)

Jones, E.

1990-01-01

Over the past 25 years extensive federal legislation involving the handling and transport of hazardous materials/waste has been passed that has resulted in numerous overlapping regulations administered and enforced by different federal agencies. The handling and transport of hazardous materials/waste involves a significant number of workers who are subject to a varying degree of risk should an accident occur during handling or transport. Effective transportation training can help workers address these risks and mitigate them, and at the same time enable ORNL to comply with the federal regulations concerning the transport of hazardous materials/waste. This presentation will outline how the Environmental and Health Protection Division's Technical Resources and Training Section at the Oak Ridge National Laboratory, working with transportation and waste disposal personnel, have developed and implemented a comprehensive transportation safety training program to meet the needs of our workers while satisfying appropriate federal regulations. 8 refs., 3 tabs

29 CFR 1625.4 - Help wanted notices or advertisements.

Science.gov (United States)

2010-07-01

... 29 Labor 4 2010-07-01 2010-07-01 false Help wanted notices or advertisements. 1625.4 Section 1625.4 Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION AGE DISCRIMINATION IN EMPLOYMENT ACT Interpretations § 1625.4 Help wanted notices or advertisements. (a) Help wanted notices or advertisements may not contain...

49 CFR 238.230 - Safety appliances-new equipment.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Safety appliances-new equipment. 238.230 Section... I Passenger Equipment § 238.230 Safety appliances—new equipment. (a) Applicability. This section..., 2007, that is equipped with a safety appliance, required by the “manner of application” provisions in...

14 CFR 27.1413 - Safety belts.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Safety belts. 27.1413 Section 27.1413 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Equipment Safety Equipment § 27.1413 Safety belts. Each safety belt...

The perception of the patient safety climate by professionals of the emergency department.

Science.gov (United States)

Rigobello, Mayara Carvalho Godinho; Carvalho, Rhanna Emanuela Fontenele Lima de; Guerreiro, Juliana Magalhães; Motta, Ana Paula Gobbo; Atila, Elizabeth; Gimenes, Fernanda Raphael Escobar

2017-07-01

The aim of this study was to assess the patient safety climate from the perspective of healthcare professionals working in the emergency department of a hospital in Brazil. Emergency departments are complex and dynamic environments. They are prone to adverse events that compromise the quality of care provided and reveal the importance of patient safety culture and climate. This was a quantitative, descriptive, cross-sectional study. The Safety Attitudes Questionnaire (SAQ) - Short Form 2006 was used for data collection, validated and adapted into Portuguese. The study sample consisted of 125 participants. Most of the participants were female (57.6%) and had worked in emergency department for more than 10years (56.8%). Sixty-two participants (49.6%) were nursing professionals. The participants demonstrated satisfaction with their jobs and dissatisfaction with the actions of management with regard to safety issues. Participants' perceptions about the patient safety climate were found to be negative. Knowledge of professionals' perceptions of patient safety climate in the context of emergency care helps with assessments of the safety culture, contributes to improvement of health care, reduces adverse events, and can focus efforts to improve the quality of care provided to patients. Copyright © 2017 Elsevier Ltd. All rights reserved.

Management of safety and safety culture at the NPPs of Ukraine

International Nuclear Information System (INIS)

Koltakov, Vladimir

2002-01-01

The report contains general aspects of safety and safety culture. The brief description of operational characteristics and basic indexes of atomic power plants at the Ukraine are represented. The information referring to structure of NPPs of Operation organization license-holder, safety responsibility of both Regulatory and Utility Bodies also is given. The main part of the report include seven sections: 1. Practical application of safety management models; 2. erspective on the relationship between safety management and safety culture; 3. The role of leadership in achieving high standards of safety; 4. Current and future challengers that impact on safety culture and safety management (e.g. the impact of competition, changing, economic and political circumstances, workforce demographics, etc.); 5. Key lessons learned from major events; 6. Practical applications of safety culture concepts (e.g. learning organizations, training staff communications, etc.); 7. dvance in human performance. Some of the main pending safety and safety culture problems that are necessary to achieve in the near future are mentioned

10 CFR 830.202 - Safety basis.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Safety basis. 830.202 Section 830.202 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.202 Safety basis. (a) The contractor responsible for a hazard category 1, 2, or 3 DOE nuclear facility must establish and maintain the safety basis...

Voluntary Safety Management System in the Manufacturing Industry – To What Extent does OHSAS 18001 Certification Help?

Directory of Open Access Journals (Sweden)

Paas Õnnela

2015-11-01

Full Text Available Occupational risk prevention can be managed in several ways. Voluntary safety management standard OHSAS 18001 is a tool, which is considered to give contribution in effective risk management in the manufacturing industry. The current paper examines the benefits of OHSAS 18001 based on the statistical analysis. MISHA method is used for safety audit in 16 Estonian enterprises. The results demonstrate the objectives why companies implement or are willing to implement OHSAS 18001, bring out differences in safety activities for 3 types of companies and determine correlations among different safety activity areas. The information is valuable for enterprises that are willing to improve their safety activities via a voluntary safety management system.

9 CFR 113.38 - Guinea pig safety test.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Guinea pig safety test. 113.38 Section... Standard Procedures § 113.38 Guinea pig safety test. The guinea pig safety test provided in this section... be injected either intramuscularly or subcutaneously into each of two guinea pigs and the animals...

Influence of parental perception of school safety and gender on children’s physical activity in Mexico: A cross sectional study

Directory of Open Access Journals (Sweden)

Amy Hutchens

2016-01-01

Full Text Available Objective. This cross sectional study aims to determine the effects of gender and parental perception of safety at school on children’s physical activity (PA levels. Materials and methods. Parents of school aged Mexican children residing in Guadalajara, Mexico City, and Puerto Vallarta, completed surveys about their children’s PA measures. The physical activity indicators were evaluated using linear and logistical regression models. Results. Analysis did not indicate that gender moderated the relationship between parental perception of safety and PA measures, but significant gender issues exist with girls participating less than boys in the three measures of PA in this study (p<0.001. Conclusion. Results suggest the need for additional interventions promoting physical activity in girls in Mexico.

Operating experience: safety perspective

International Nuclear Information System (INIS)

Piplani, Vivek; Krishnamurthy, P.R.; Kumar, Neeraj; Upadhyay, Devendra

2015-01-01

Operating Experience (OE) provides valuable information for improving NPP safety. This may include events, precursors, deviations, deficiencies, problems, new insights to safety, good practices, lessons and corrective actions. As per INSAG-10, an OE program caters as a fundamental means for enhancing the defence-in-depth at NPPs and hence should be viewed as ‘Continuous Safety Performance Improvement Tool’. The ‘Convention on Nuclear Safety’ also recognizes the OE as a tool of high importance for enhancing the NPP safety and its Article 19 mandates each contracting party to establish an effective OE program at operating NPPs. The lessons drawn from major accidents at Three Mile Island, Chernobyl and Fukushima Daiichi NPPs had prompted nuclear stalwarts to change their safety perspective towards NPPs and to frame sound policies on issues like safety culture, severe accident prevention and mitigation. An effective OE program, besides correcting current/potential problems, help in proactively improving the NPP design, operating and maintenance procedures, practices, training, etc., and thus plays vital role in ensuring safe and efficient operation of NPPs. Further it enhances knowledge with regard to equipment operating characteristics, system performance trends and provides data for quantitative and qualitative safety analysis. Besides all above, an OE program inculcates a learning culture in the organisation and thus helps in continuously enhancing the expertise, technical competency and knowledge base of its staff. Nuclear and Radiation Facilities in India are regulated by Atomic Energy Regulatory Board (AERB). Operating Plants Safety Division (OPSD) of AERB is involved in managing operating experience activities. This paper provides insights about the operating experience program of OPSD, AERB (including its on-line data base namely OPSD STAR) and its utilisation in improving the regulations and safety at Indian NPPs/projects. (author)

25 CFR 103.2 - Who does the Program help?

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Who does the Program help? 103.2 Section 103.2 Indians... INTEREST SUBSIDY General Provisions § 103.2 Who does the Program help? The purpose of the Program is to... direct function of the Program is to help lenders reduce excessive risks on loans they make. That...

50 CFR 25.71 - Public safety.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Public safety. 25.71 Section 25.71... NATIONAL WILDLIFE REFUGE SYSTEM ADMINISTRATIVE PROVISIONS Safety Regulations § 25.71 Public safety. Persons using national wildlife refuges shall comply with the safety requirements which are established under...

[Patient safety culture in family and community medicine residents in Aragon].

Science.gov (United States)

Rodríguez-Cogollo, R; Paredes-Alvarado, I R; Galicia-Flores, T; Barrasa-Villar, J I; Castán-Ruiz, S

2014-01-01

having an appropriate patient safety culture is the first recommendation to improve it. The aim of this article is to determine the safety culture in family medicine residents and then to identify improvement strategies. an online cross-sectional survey of residents in family medicine teaching units of Aragon using the translated, validated and adapted to Spanish, Medical Office Survey on Patient Safety Culture (MOSPS) questionnaire. The results were grouped in 12-dimensional responses for analysis, and the mean value of each dimension was calculated. Perceptions were described by Percentages of Positive (PRP) and Negative Responses (PRN) to each dimension. positive results were seen in «the Patient Care Tracking/Follow-up». There were significant differences in the «Information Exchange With Other Settings», «Staff Training» and «Overall Perceptions of Patient Safety and Quality». Study participants viewed «Work Pressure and Pace» negatively. the institutions providing health services, as well as their staff, are increasingly aware of the importance of improving Patient Safety, and the results of this study allowed us to present information that helps identify weaknesses, and to design initiatives and strategies to improve care practices. Copyright © 2013 SECA. Published by Elsevier Espana. All rights reserved.

Relationships among Safety Climate, Safety Behavior, and Safety Outcomes for Ethnic Minority Construction Workers

Directory of Open Access Journals (Sweden)

Sainan Lyu

2018-03-01

Full Text Available In many countries, it is common practice to attract and employ ethnic minority (EM or migrant workers in the construction industry. This primarily occurs in order to alleviate the labor shortage caused by an aging workforce with a lack of new entrants. Statistics show that EM construction workers are more likely to have occupational fatal and nonfatal injuries than their local counterparts; however, the mechanism underlying accidents and injuries in this vulnerable population has been rarely examined. This study aims to investigate relationships among safety climate, safety behavior, and safety outcomes for EM construction workers. To this end, a theoretical research model was developed based on a comprehensive review of the current literature. In total, 289 valid questionnaires were collected face-to-face from 223 Nepalese construction workers and 56 Pakistani construction workers working on 15 construction sites in Hong Kong. Structural equation modelling was employed to validate the constructs and test the hypothesized model. Results show that there were significant positive relationships between safety climate and safety behaviors, and significant negative relationships between safety behaviors and safety outcomes for EM construction workers. This research contributes to the literature regarding EM workers by providing empirical evidence of the mechanisms by which safety climate affects safety behaviors and outcomes. It also provides insights in order to help the key stakeholders formulate safety strategies for EM workers in many areas where numerous EM workers are employed, such as in the U.S., the UK, Australia, Singapore, Malaysia, and the Middle East.

Relationships among Safety Climate, Safety Behavior, and Safety Outcomes for Ethnic Minority Construction Workers.

Science.gov (United States)

Lyu, Sainan; Hon, Carol K H; Chan, Albert P C; Wong, Francis K W; Javed, Arshad Ali

2018-03-09

In many countries, it is common practice to attract and employ ethnic minority (EM) or migrant workers in the construction industry. This primarily occurs in order to alleviate the labor shortage caused by an aging workforce with a lack of new entrants. Statistics show that EM construction workers are more likely to have occupational fatal and nonfatal injuries than their local counterparts; however, the mechanism underlying accidents and injuries in this vulnerable population has been rarely examined. This study aims to investigate relationships among safety climate, safety behavior, and safety outcomes for EM construction workers. To this end, a theoretical research model was developed based on a comprehensive review of the current literature. In total, 289 valid questionnaires were collected face-to-face from 223 Nepalese construction workers and 56 Pakistani construction workers working on 15 construction sites in Hong Kong. Structural equation modelling was employed to validate the constructs and test the hypothesized model. Results show that there were significant positive relationships between safety climate and safety behaviors, and significant negative relationships between safety behaviors and safety outcomes for EM construction workers. This research contributes to the literature regarding EM workers by providing empirical evidence of the mechanisms by which safety climate affects safety behaviors and outcomes. It also provides insights in order to help the key stakeholders formulate safety strategies for EM workers in many areas where numerous EM workers are employed, such as in the U.S., the UK, Australia, Singapore, Malaysia, and the Middle East.

49 CFR 238.103 - Fire safety.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Fire safety. 238.103 Section 238.103..., DEPARTMENT OF TRANSPORTATION PASSENGER EQUIPMENT SAFETY STANDARDS Safety Planning and General Requirements § 238.103 Fire safety. (a) Materials. (1) Materials used in constructing a passenger car or a cab of a...

20 CFR 638.803 - Safety.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Safety. 638.803 Section 638.803 Employees... THE JOB TRAINING PARTNERSHIP ACT Administrative Provisions § 638.803 Safety. (a) The Job Corps... shall be assigned to such jobs or training in accordance with appropriate health and safety practices...

Nuclear Safety Review 2013

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-07-15

The Nuclear Safety Review 2013 focuses on the dominant nuclear safety trends, issues and challenges in 2012. The Executive Overview provides crosscutting and worldwide nuclear safety information along with a summary of the major sections covered in this report. Sections A-E of this report cover improving radiation, transport and waste safety; strengthening safety in nuclear installations; improving regulatory infrastructure and effectiveness; enhancing emergency preparedness and response (EPR); and civil liability for nuclear damage. The Appendix provides details on the activities of the Commission on Safety Standards (CSS), and activities relevant to the IAEA Safety Standards. The world nuclear community has made noteworthy progress in strengthening nuclear safety in 2012, as promoted by the IAEA Action Plan on Nuclear Safety (hereinafter referred to as ''the Action Plan''). For example, an overwhelming majority of Member States with operating nuclear power plants (NPPs) have undertaken and essentially completed comprehensive safety reassessments ('stress tests') with the aim of evaluating the design and safety aspects of plant robustness to protect against extreme events, including: defence in depth, safety margins, cliff edge effects, multiple failures, and the prolonged loss of support systems. As a result, many have introduced additional safety measures including mitigation of station blackout. Moreover, the IAEA's peer review services and safety standards have been reviewed and strengthened where needed. Capacity building programmes have been built or improved, and EPR programmes have also been reviewed and improved. Furthermore, in 2012, the IAEA continued to share lessons learned from the Fukushima Daiichi accident with the nuclear community including through three international experts' meetings (IEMs) on reactor and spent fuel safety, communication in the event of a nuclear or radiological emergency, and protection against extreme earthquakes and tsunamis.

Nuclear Safety Review 2013

International Nuclear Information System (INIS)

2013-07-01

The Nuclear Safety Review 2013 focuses on the dominant nuclear safety trends, issues and challenges in 2012. The Executive Overview provides crosscutting and worldwide nuclear safety information along with a summary of the major sections covered in this report. Sections A-E of this report cover improving radiation, transport and waste safety; strengthening safety in nuclear installations; improving regulatory infrastructure and effectiveness; enhancing emergency preparedness and response (EPR); and civil liability for nuclear damage. The Appendix provides details on the activities of the Commission on Safety Standards (CSS), and activities relevant to the IAEA Safety Standards. The world nuclear community has made noteworthy progress in strengthening nuclear safety in 2012, as promoted by the IAEA Action Plan on Nuclear Safety (hereinafter referred to as ''the Action Plan''). For example, an overwhelming majority of Member States with operating nuclear power plants (NPPs) have undertaken and essentially completed comprehensive safety reassessments ('stress tests') with the aim of evaluating the design and safety aspects of plant robustness to protect against extreme events, including: defence in depth, safety margins, cliff edge effects, multiple failures, and the prolonged loss of support systems. As a result, many have introduced additional safety measures including mitigation of station blackout. Moreover, the IAEA's peer review services and safety standards have been reviewed and strengthened where needed. Capacity building programmes have been built or improved, and EPR programmes have also been reviewed and improved. Furthermore, in 2012, the IAEA continued to share lessons learned from the Fukushima Daiichi accident with the nuclear community including through three international experts' meetings (IEMs) on reactor and spent fuel safety, communication in the event of a nuclear or radiological emergency, and protection against extreme earthquakes and tsunamis

49 CFR 385.107 - The safety audit.

Science.gov (United States)

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false The safety audit. 385.107 Section 385.107 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES Safety Monitoring System for Mexico-Domicile...

ANALYSIS ON THE INFLUENCE OF ACCUMULATION EFFECT OF LANDSCAPE COLOR ON TRAFFIC SAFETY IN THE FOGGY SECTIONS OF EXPRESSWAYS

OpenAIRE

Xilei Li; Boming Tang; Qianghui Song

2017-01-01

The landscape color of expressways has a significant impact on a driver's visual response, thus affecting the incidence of expressways traffic accidents. Although this problem has been analyzed and discussed from different angles, there is rare quantitative analysis on the influence of accumulation effect of landscape color on the traffic safety in foggy sections of expressways. In this paper, the color combination and stroboflash of fog lamps on both sides of the road were designed from the ...

The IAEA programme on research reactor safety

International Nuclear Information System (INIS)

Abou Yehia, H.

2007-01-01

According to the research reactor database of IAEA (RRDB), 250 reactors are operating worldwide, 248 have been shut down and 170 have been decommissioned. Among the 248 reactors that do not run, some will resume their activities, others will be dismantled and the rest do not face a clear future. The analysis of reported incidents shows that the ageing process is a major cause of failures, more than two thirds of operating reactors are over 30 years old. It also appears that the lack of adequate regulations or safety standards for research reactors is an important issue concerning reactor safety particularly when reactors are facing re-starting or upgrading or modifications. The IAEA has launched a 4-axis program: 1) to set basic safety regulations and standards for research reactors, 2) to provide IAEA members with an efficient help for the application of these safety regulations to their reactors, 3) to foster international exchange of information on research reactor safety, and 4) to provide IAEA members with a help concerning safety issues linked to malicious acts or sabotage on research reactors

14 CFR 415.117 - Ground safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Ground safety. 415.117 Section 415.117... TRANSPORTATION LICENSING LAUNCH LICENSE Safety Review and Approval for Launch of an Expendable Launch Vehicle From a Non-Federal Launch Site § 415.117 Ground safety. (a) General. An applicant's safety review...

14 CFR 415.115 - Flight safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Flight safety. 415.115 Section 415.115... TRANSPORTATION LICENSING LAUNCH LICENSE Safety Review and Approval for Launch of an Expendable Launch Vehicle From a Non-Federal Launch Site § 415.115 Flight safety. (a) Flight safety analysis. An applicant's...

Sources of Safety Data and Statistical Strategies for Design and Analysis: Postmarket Surveillance.

Science.gov (United States)

Izem, Rima; Sanchez-Kam, Matilde; Ma, Haijun; Zink, Richard; Zhao, Yueqin

2018-03-01

Safety data are continuously evaluated throughout the life cycle of a medical product to accurately assess and characterize the risks associated with the product. The knowledge about a medical product's safety profile continually evolves as safety data accumulate. This paper discusses data sources and analysis considerations for safety signal detection after a medical product is approved for marketing. This manuscript is the second in a series of papers from the American Statistical Association Biopharmaceutical Section Safety Working Group. We share our recommendations for the statistical and graphical methodologies necessary to appropriately analyze, report, and interpret safety outcomes, and we discuss the advantages and disadvantages of safety data obtained from passive postmarketing surveillance systems compared to other sources. Signal detection has traditionally relied on spontaneous reporting databases that have been available worldwide for decades. However, current regulatory guidelines and ease of reporting have increased the size of these databases exponentially over the last few years. With such large databases, data-mining tools using disproportionality analysis and helpful graphics are often used to detect potential signals. Although the data sources have many limitations, analyses of these data have been successful at identifying safety signals postmarketing. Experience analyzing these dynamic data is useful in understanding the potential and limitations of analyses with new data sources such as social media, claims, or electronic medical records data.

Raising positive expectations helps patients with minor ailments: a cross-sectional study

NARCIS (Netherlands)

Fassaert, T.; van Dulmen, S.M.; Schellevis, F.G.; van der Jagt, L.; Bensing, J.M.

2008-01-01

Background. Consultations for minor ailments constitute a large part of the workload of general practitioners (GPs). As medical interventions are not always available, specific communication strategies, such as active listening and positive communication, might help GPs to handle these problems

Raising positive expectations helps patients with minor ailments: a cross-sectional study.

NARCIS (Netherlands)

Fassaert, T.; Dulmen, S. van; Schellevis, F.; Jagt, L. van der; Bensing, J.

2008-01-01

Background: Consultations for minor ailments constitute a large part of the workload of general practitioners (GPs). As medical interventions are not always available, specific communication strategies, such as active listening and positive communication, might help GPs to handle these problems

Patient safety climate and worker safety behaviours in acute hospitals in Scotland.

Science.gov (United States)

Agnew, Cakil; Flin, Rhona; Mearns, Kathryn

2013-06-01

To obtain a measure of hospital safety climate from a sample of National Health Service (NHS) acute hospitals in Scotland and to test whether these scores were associated with worker safety behaviors, and patient and worker injuries. Data were from 1,866 NHS clinical staff in six Scottish acute hospitals. A Scottish Hospital Safety Questionnaire measured hospital safety climate (Hospital Survey on Patient Safety Culture), worker safety behaviors, and worker and patient injuries. The associations between the hospital safety climate scores and the outcome measures (safety behaviors, worker and patient injury rates) were examined. Hospital safety climate scores were significantly correlated with clinical workers' safety behavior and patient and worker injury measures, although the effect sizes were smaller for the latter. Regression analyses revealed that perceptions of staffing levels and managerial commitment were significant predictors for all the safety outcome measures. Both patient-specific and more generic safety climate items were found to have significant impacts on safety outcome measures. This study demonstrated the influences of different aspects of hospital safety climate on both patient and worker safety outcomes. Moreover, it has been shown that in a hospital setting, a safety climate supporting safer patient care would also help to ensure worker safety. The Scottish Hospital Safety Questionnaire has proved to be a usable method of measuring both hospital safety climate as well as patient and worker safety outcomes. Copyright © 2013 National Safety Council and Elsevier Ltd. Published by Elsevier Ltd. All rights reserved.

Safety Education in Driving. 2nd Revision.

Science.gov (United States)

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Intended for driving instruction students, this publication contains instructional materials for safety education. It contains six sections on facts and figures; defensive driving; safety devices; restraints; emergency situations; and other highway users. Each section consists of reading material followed by an activity or activities. A total of…

21 CFR 610.11 - General safety.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 7 2010-04-01 2010-04-01 false General safety. 610.11 Section 610.11 Food and... GENERAL BIOLOGICAL PRODUCTS STANDARDS General Provisions § 610.11 General safety. A general safety test... for administration to humans. The general safety test is required in addition to other specific tests...

Defining safety culture and the nexus between safety goals and safety culture. 1. An Investigation Study on Practical Points of Safety Management

International Nuclear Information System (INIS)

Hasegawa, Naoko; Takano, Kenichi; Hirose, Ayako

2001-01-01

In a report after the Chernobyl accident, the International Atomic Energy Agency indicated the definition and the importance of safety culture and the ideal organizational state where safety culture pervades. However, the report did not mention practical approaches to enhance safety culture. In Japan, although there had been investigations that clarified the consciousness of employees and the organizational climate in the nuclear power and railway industries, organizational factors that clarified the level of organization safety and practical methods that spread safety culture in an organization had not been studied. The Central Research Institute of the Electric Power Industry conducted surveys of organizational culture for the construction, chemical, and manufacturing industries. The aim of our study was to clarify the organizational factors that influence safety in an organization expressed in employee safety consciousness, commitment to safety activities, rate of accidents, etc. If these areas were clarified, the level of organization safety might be evaluated, and practical ways could be suggested to enhance the safety culture. Consequently, a series of investigations was conducted to clarify relationships among organizational climate, employee consciousness, safety management and activities, and rate of accidents. The questionnaire surveys were conducted in 1998-1999. The subjects were (a) managers of the safety management sections in the head offices of the construction, chemical, and manufacturing industries; (b) responsible persons in factories of the chemical and manufacturing industries; and (c) general workers in factories of the chemical and manufacturing industries. The number of collected data was (a) managers in the head office: 48 from the construction industry and 58 from the chemical and manufacturing industries, (b) responsible persons in factories: 567, and (c) general workers: from 29 factories. Items in the questionnaires were selected from

16 CFR 1116.6 - Contents of section 37 reports.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Contents of section 37 reports. 1116.6 Section 1116.6 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT..., and the court in which the civil action was filed. (b) Optional information. A manufacturer furnishing...

An Integrated Safety Assessment Methodology for Generation IV Nuclear Systems

International Nuclear Information System (INIS)

Leahy, Timothy J.

2010-01-01

The Generation IV International Forum (GIF) Risk and Safety Working Group (RSWG) was created to develop an effective approach for the safety of Generation IV advanced nuclear energy systems. Early work of the RSWG focused on defining a safety philosophy founded on lessons learned from current and prior generations of nuclear technologies, and on identifying technology characteristics that may help achieve Generation IV safety goals. More recent RSWG work has focused on the definition of an integrated safety assessment methodology for evaluating the safety of Generation IV systems. The methodology, tentatively called ISAM, is an integrated 'toolkit' consisting of analytical techniques that are available and matched to appropriate stages of Generation IV system concept development. The integrated methodology is intended to yield safety-related insights that help actively drive the evolving design throughout the technology development cycle, potentially resulting in enhanced safety, reduced costs, and shortened development time.

Safety issues and their ranking for WWER-440 model 213 nuclear power plants. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

International Nuclear Information System (INIS)

1996-04-01

The objective of this report is to present a consolidated list of generic safety concerns, called safety issues, ranked according to their safety significance and the corrective measures to improve safety. It is intended for use as a reference to facilitate the development of plant specific safety improvement programmes and to serve as a basis for reviewing their implementation. Section 2 provides and overview of the impact of all relevant issues on the main safety functions and other aspects important to overall plant safety. Section 3 presents safety issues identified in design according to the structure described below. Section 4 presents the safety issues in the area of operation, according to the same structure except that no ranking is given. At the end of Section 2, Tables 1 and 2 present a summary of all safety issues in a tabular form. 138 refs, tabs

15 CFR 970.205 - Vessel safety.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Vessel safety. 970.205 Section 970.205... safety. In order to provide a basis for the necessary determinations with respect to the safety of life... Safety of Life at Sea, 1974 (SOLAS 74) possesses current valid SOLAS 74 certificates; (2) That any...

33 CFR 151.1512 - Vessel safety.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Vessel safety. 151.1512 Section... River § 151.1512 Vessel safety. Nothing in this subpart relieves the master of the responsibility for ensuring the safety and stability of the vessel or the safety of the crew and passengers, or any other...

36 CFR 1004.15 - Safety belts.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Safety belts. 1004.15 Section 1004.15 Parks, Forests, and Public Property PRESIDIO TRUST VEHICLES AND TRAFFIC SAFETY § 1004.15 Safety... administered by the Presidio Trust will have the safety belt or child restraint system properly fastened at all...

Helping hippocrates: a cross-functional approach to patient identification.

Science.gov (United States)

Greenly, Margaret A

2006-08-01

The Joint Commission on Accreditation of Healthcare Organizations National Patient Safety Goal 1, which requires the use of at least two patient identifiers, is the foundation for other patient safety goals. St. Francis Hospital involved staff and patients in the "Helping Hippocrates" Project, which used a "game" with staff and patients to ensure the accuracy of information on patients' identification (ID) bands. Members of all hospital departments assigned to a specific day were to compare the ID band with the patient census report and identify patients who had no ID band on their wrist and patients who had a band with inaccuracies. They were to also ask patients if the staff had checked the ID band before treatments or procedures. Also, the nurse manager was to select a patient to add to his or her own ID band a special band bearing the name Hippocrates. The department conducting the survey had to find Hippocrates. Internal data showed that patient identification errors declined from 8.2% to a sustained zero. Patient satisfaction data showed that since the inception of Helping Hippocrates, patients' perceptions of staffs compliance with ID verification showed steady improvement. Helping Hippocrates demonstrates the value of using an innovative problem-solving strategy that engages the entire organization.

33 CFR 147.847 - Safety Zone; BW PIONEER Floating Production, Storage, and Offloading System Safety Zone.

Science.gov (United States)

2010-07-01

... Production, Storage, and Offloading System Safety Zone. 147.847 Section 147.847 Navigation and Navigable... ZONES § 147.847 Safety Zone; BW PIONEER Floating Production, Storage, and Offloading System Safety Zone. (a) Description. The BW PIONEER, a Floating Production, Storage and Offloading (FPSO) system, is in...

33 CFR 159.95 - Safety.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety. 159.95 Section 159.95... SANITATION DEVICES Design, Construction, and Testing § 159.95 Safety. (a) Each device must— (1) Be free of... explosion or over pressurization as a result of an accumulation of gases; and (3) Meet all other safety...

Food safety objective: an integral part of food chain management

NARCIS (Netherlands)

Gorris, L.G.M.

2005-01-01

The concept of food safety objective has been proposed to provide a target for operational food safety management, leaving flexibility in the way equivalent food safety levels are achieved by different food chains. The concept helps to better relate operational food safety management to public

Template for safety reports with descriptive example

International Nuclear Information System (INIS)

1995-12-01

This report provides a template for future safety reports on long-term safety in support of important decisions and permit applications in connection with the construction of a deep repository system. The template aims at providing a uniform structure for describing long-term safety, after the repository has been closed and sealed. The availability of such a structure will simplify both preparation and review of the safety reports, and make it possible to follow how safety assessments are influenced by the progressively more detailed body of data that emerges. A separate section containing 'descriptive examples' has been appended to the template. This section illustrates what the different chapters of the template should contain. 279 refs

Template for safety reports with descriptive example

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-01

This report provides a template for future safety reports on long-term safety in support of important decisions and permit applications in connection with the construction of a deep repository system. The template aims at providing a uniform structure for describing long-term safety, after the repository has been closed and sealed. The availability of such a structure will simplify both preparation and review of the safety reports, and make it possible to follow how safety assessments are influenced by the progressively more detailed body of data that emerges. A separate section containing `descriptive examples` has been appended to the template. This section illustrates what the different chapters of the template should contain. 279 refs.

Transportation Safety Excellence in Operations Through Improved Transportation Safety Document

International Nuclear Information System (INIS)

Dr. Michael A. Lehto; MAL

2007-01-01

A recent accomplishment of the Idaho National Laboratory (INL) Materials and Fuels Complex (MFC) Nuclear Safety analysis group was to obtain DOE-ID approval for the inter-facility transfer of greater-than-Hazard-Category-3 quantity radioactive/fissionable waste in Department of Transportation (DOT) Type A drums at MFC. This accomplishment supported excellence in operations through safety analysis by better integrating nuclear safety requirements with waste requirements in the Transportation Safety Document (TSD); reducing container and transport costs; and making facility operations more efficient. The MFC TSD governs and controls the inter-facility transfer of greater-than-Hazard-Category-3 radioactive and/or fissionable materials in non-DOT approved containers. Previously, the TSD did not include the capability to transfer payloads of greater-than-Hazard-Category-3 radioactive and/or fissionable materials using DOT Type A drums. Previous practice was to package the waste materials to less-than-Hazard-Category-3 quantities when loading DOT Type A drums for transfer out of facilities to reduce facility waste accumulations. This practice allowed operations to proceed, but resulted in drums being loaded to less than the Waste Isolation Pilot Plant (WIPP) waste acceptance criteria (WAC) waste limits, which was not cost effective or operations friendly. An improved and revised safety analysis was used to gain DOE-ID approval for adding this container configuration to the MFC TSD safety basis. In the process of obtaining approval of the revised safety basis, safety analysis practices were used effectively to directly support excellence in operations. Several factors contributed to the success of MFC's effort to obtain approval for the use of DOT Type A drums, including two practices that could help in future safety basis changes at other facilities. (1) The process of incorporating the DOT Type A drums into the TSD at MFC helped to better integrate nuclear safety

Safety climate in OHSAS 18001-certified organisations: antecedents and consequences of safety behaviour.

Science.gov (United States)

Fernández-Muñiz, Beatriz; Montes-Peón, José Manuel; Vázquez-Ordás, Camilo José

2012-03-01

The occupational health and safety standard OHSAS 18001 has gained considerable acceptance worldwide, and firms from diverse sectors and of varying sizes have implemented it. Despite this, very few studies have analysed safety management or the safety climate in OHSAS 18001-certified organisations. The current work aims to analyse the safety climate in these organisations, identify its dimensions, and propose and test a structural equation model that will help determine the antecedents and consequences of employees' safety behaviour. For this purpose, the authors carry out an empirical study using a sample of 131 OHSAS 18001-certified organisations located in Spain. The results show that management's commitment, and particularly communication, have an effect on safety behaviour and on safety performance, employee satisfaction, and firm competitiveness. These findings are particularly important for management since they provide evidence about the factors that should be encouraged to reduce risks and improve performance in this type of organisation. Copyright © 2011 Elsevier Ltd. All rights reserved.

36 CFR 4.15 - Safety belts.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Safety belts. 4.15 Section 4... TRAFFIC SAFETY § 4.15 Safety belts. (a) Each operator and passenger occupying any seating position of a motor vehicle in a park area will have the safety belt or child restraint system properly fastened at...

40 CFR 243.201 - Safety.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Safety. 243.201 Section 243.201 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE STORAGE... Procedures § 243.201 Safety. ...

Behavior based safety

International Nuclear Information System (INIS)

Sudhikumaran, T.V.; Mehta, S.C.; Goyal, D.K.

2009-01-01

Behaviour Based Safety (popularly known as BBS) is a new methodology for achieving injury free work place and total Safety Culture. BBS is successfully being implemented and is being practiced as a work methodology for achieving a loss and injury free work environment and work practice. Through BBS, it was brought out that the root causes of all Industrial accidents some how originate from the 'at risk' behaviour of some individual or group of individuals at some level. The policy of NPCIL is to excel in the field of Industrial and Fire Safety in comparison to international standards. This article indents to bring out the various parameters helping in installing BBS programme at any plant. (author)

47 CFR 95.1125 - RF safety.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false RF safety. 95.1125 Section 95.1125 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PERSONAL RADIO SERVICES Wireless Medical Telemetry Service (WMTS) General Provisions § 95.1125 RF safety. Portable devices...

40 CFR 87.6 - Aircraft safety.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Aircraft safety. 87.6 Section 87.6... POLLUTION FROM AIRCRAFT AND AIRCRAFT ENGINES General Provisions § 87.6 Aircraft safety. The provisions of... met within the specified time without creating a safety hazard. ...

Benchmarking road safety performances of countries.

NARCIS (Netherlands)

Wegman, F.C.M. & Oppe, S.

2014-01-01

In order to obtain political interest in road safety problems and to learn from other countries’ ‘good practices’, it is often helpful to compare one’s own safety situation with that of other countries. In a number of projects tools have been developed for such comparisons. These tools range from

Crime, perceived safety, and physical activity: A meta-analysis.

Science.gov (United States)

Rees-Punia, Erika; Hathaway, Elizabeth D; Gay, Jennifer L

2018-06-01

Perceived safety from crime and objectively-measured crime rates may be associated with physical inactivity. The purpose of this meta-analysis is to estimate the odds of accumulating high levels of physical activity (PA) when the perception of safety from crime is high and when objectively-measured crime is high. Peer-reviewed studies were identified through PubMed, Web of Science, ProQuest Criminal Justice, and ScienceDirect from earliest record through 2016. Included studies measured total PA, leisure-time PA, or walking in addition to perceived safety from crime or objective measures of crime. Mean odds ratios were aggregated with random effects models, and meta-regression was used to examine effects of potential moderators: country, age, and crime/PA measure. Sixteen cross-sectional studies yielded sixteen effects for perceived safety from crime and four effects for objective crime. Those reporting feeling safe from crime had a 27% greater odds of achieving higher levels of physical activity (OR=1.27 [1.08, 1.49]), and those living in areas with higher objectively-measured crime had a 28% reduced odds of achieving higher levels of physical activity (OR=0.72 [0.61, 0.83]). Effects of perceived safety were highly heterogeneous (I 2 =94.09%), but explored moderators were not statistically significant, likely because of the small sample size. Despite the limited number of effects suitable for aggregation, the mean association between perceived safety and PA was significant. As it seems likely that perceived lack of safety from crime constrains PA behaviors, future research exploring moderators of this association may help guide public health recommendations and interventions. Copyright © 2017 Elsevier Inc. All rights reserved.

Fire safety of wood construction

Science.gov (United States)

Robert H. White; Mark A. Dietenberger

2010-01-01

Fire safety is an important concern in all types of construction. The high level of national concern for fire safety is reflected in limitations and design requirements in building codes. These code requirements and related fire performance data are discussed in the context of fire safety design and evaluation in the initial section of this chapter. Because basic data...

Help-Seeking After Domestic Violence: The Critical Role of Children.

Science.gov (United States)

Rasool, Shahana

2016-05-01

Limited knowledge is available on the conditions that contribute to women's help-seeking after domestic violence in South Africa. Qualitative research conducted with 17 abused women in shelters in South Africa indicate that the best interests of children are influential both in women's decisions to stay in abusive relationships and to seek help. The personal decisions of women to seek help are influenced by powerful social discourses on the best interests of the child. Policy and practice that advocate for the best interests of the child need to prioritize the safety of both mothers and their children in domestic violence situations. © The Author(s) 2015.

Safety issues and their ranking for WWER-1000 model 320 nuclear power plants. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

International Nuclear Information System (INIS)

1996-03-01

The objective of this report is to present a consolidated list of safety deficiencies, called safety issues, ranked according to their safety significance and the corrective measures to improve overall safety. It is intended for use as a reference to facilitate the development of plant specific safety improvement programmes and to serve as a basis for reviewing their implementation. To the extent that information was made available to the IAEA, the country/plant specific status with respect to each safety issue is described. Section 2 provides an overview of the impact of the relevant issues on the main safety functions in different operational conditions and other aspects important to overall plant safety. A summary of the safety issues and their respective ranking is given in Tables 1 and 2 at the end of Section 2. Section 3 deals with individual safety issues identified in the design which are presented according to the structure below. Section 4 presents the safety issues related to operational safety according to a similar structure but without the ranking. 73 refs, 3 tabs

Safety issues and their ranking for WWER-1000 model 320 nuclear power plants. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

International Nuclear Information System (INIS)

1997-04-01

The objective of this report is to present a consolidated list of safety deficiencies, called safety issues, ranked according to their safety significance and the corrective measures to improve overall safety. It is intended for use as a reference to facilitate the development of plant specific safety improvement programmes and to serve as a basis for reviewing their implementation. To the extent that information was made available to the IAEA, the country/plant specific status with respect to each safety issue is described. Section 2 provides an overview of the impact of the relevant issues on the main safety functions in different operational conditions and other aspects important to overall plant safety. A summary of the safety issues and their respective ranking is given in Tables 1 and 2 at the end of Section 2. Section 3 deals with individual safety issues identified in the design which are presented according to the structure below. Section 4 presents the safety issues related to operational safety according to a similar structure but without the ranking

Shutdown Safety in NEK

International Nuclear Information System (INIS)

Gluhak, Mario; Senegovic, Marko

2014-01-01

Industry performance analysis since 2004 has revealed that 23% of the events reported to WANO occurred during outage periods. Given the fact that a plant is in the outage only 5 percent of the time, this emphasizes the importance of shutdown safety and measures station staffs undertake to maintain effective barriers to safety margins during the outage. Back in 1990s, the industry adopted guidance to meet safety requirements by focusing on safety functions. Both WANO and INPO released various documents, reports and guidelines to help accomplish those requirements. However, in the last decade inadequate 'defence in depth' has led to several events affecting shutdown safety and challenging one of the most important nuclear safety principles: 'The special characteristics of nuclear technology are taken into account in all decisions and actions. Reactivity control, continuity of core cooling, and integrity of fission product barriers are valued as essential, distinguishing attributes of nuclear station work environment'. NEK has recognized the importance of 'defence in depth'Industry performance analysis since 2004 has revealed that 23% of the events reported to WANO occurred during outage periods. Given the fact that a plant is in the outage only 5 percent of the time, this emphasizes the importance of shutdown safety and measures station staffs undertake to maintain effective barriers to safety margins during the outage. Back in 1990s, the industry adopted guidance to meet safety requirements by focusing on safety functions. Both WANO and INPO released various documents, reports and guidelines to help accomplish those requirements. However, in the last decade inadequate 'defence in depth' has led to several events affecting shutdown safety and challenging one of the most important nuclear safety principles: 'The special characteristics of nuclear technology are taken into account in all decisions and actions. Reactivity

Modifications to nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2004-01-01

This Safety Guide was prepared under the IAEA's programme for safety standards for nuclear power plants. It supplements Section 7 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation, which establishes the safety requirements for the modification of nuclear power plants. Reasons for carrying out modifications to nuclear power plants may include: (1) maintaining or strengthening existing safety provisions and thus maintaining consistency with or improving on the current design. (2) recovering from plant faults. (3) improving the thermal performance or increasing the power rating of the plant. (4) increasing the maintainability of the plant, reducing the radiation exposure of personnel or reducing the costs of plant maintenance. And (5) extending the design life of the plant. Most modifications, made on the basis of operating experience, are intended to improve on the design or to improve operational performance and flexibility. Some are rendered necessary by new regulatory requirements, ageing of the plant or obsolescence of equipment. However, the benefits of regularly updating the plant design can be jeopardized if modifications are not kept under rigorous control throughout the lifetime of the plant. The need to reduce costs and improve efficiency, in combination with changes to the structure of the electricity generation sector of the economy in many countries, has led many companies to make changes in the structure of the operating organization for nuclear power plants. Whatever the reason for such organizational changes, consideration should be given to the effects of those changes with the aim of ensuring that they would have no impacts that would compromise the safety of the plant. The objective of this Safety Guide is to provide guidance and recommendations on controlling activities relating to modifications at nuclear power plants in order to reduce risk and to ensure that the configuration of the plant is at all times under

Modifications to nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2007-01-01

This Safety Guide was prepared under the IAEA's programme for safety standards for nuclear power plants. It supplements Section 7 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation, which establishes the safety requirements for the modification of nuclear power plants. Reasons for carrying out modifications to nuclear power plants may include: (1) maintaining or strengthening existing safety provisions and thus maintaining consistency with or improving on the current design. (2) recovering from plant faults. (3) improving the thermal performance or increasing the power rating of the plant. (4) increasing the maintainability of the plant, reducing the radiation exposure of personnel or reducing the costs of plant maintenance. And (5) extending the design life of the plant. Most modifications, made on the basis of operating experience, are intended to improve on the design or to improve operational performance and flexibility. Some are rendered necessary by new regulatory requirements, ageing of the plant or obsolescence of equipment. However, the benefits of regularly updating the plant design can be jeopardized if modifications are not kept under rigorous control throughout the lifetime of the plant. The need to reduce costs and improve efficiency, in combination with changes to the structure of the electricity generation sector of the economy in many countries, has led many companies to make changes in the structure of the operating organization for nuclear power plants. Whatever the reason for such organizational changes, consideration should be given to the effects of those changes with the aim of ensuring that they would have no impacts that would compromise the safety of the plant. The objective of this Safety Guide is to provide guidance and recommendations on controlling activities relating to modifications at nuclear power plants in order to reduce risk and to ensure that the configuration of the plant is at all times under

Supplement to safety analysis report. 306-W building operations safety requirement

International Nuclear Information System (INIS)

Richey, C.R.

1979-08-01

The operations safety requirements (OSRs) presented in this report define the conditions, safe boundaries, and management control needed for safely conducting operations with radioactive materials in the Pacific Northwest Laboratory (PNL) 306-W building. The safety requirements are organized in five sections. Safety limits are safety-related process variables that are observable and measurable. Limiting conditions cover: equipment and technical conditions and characteristics of the facility and operations necessary for continued safe operation. Surveillance requirements prescribe the requirements for checking systems and components that are essential to safety. Equipment design controls require that changes to process equipment and systems be independently checked and approved to assure that the changes will have no adverse effect on safety. Administrative controls describe and discuss the organization and administrative systems and procedures to be used for safe operation of the facility. Details of the implementation of the operations safety requirements are prescribed by internal PNL documents such as criticality safety specifications and radiation work procedures

Educating future leaders in patient safety

Science.gov (United States)

Leotsakos, Agnès; Ardolino, Antonella; Cheung, Ronny; Zheng, Hao; Barraclough, Bruce; Walton, Merrilyn

2014-01-01

Education of health care professionals has given little attention to patient safety, resulting in limited understanding of the nature of risk in health care and the importance of strengthening systems. The World Health Organization developed the Patient Safety Curriculum Guide: Multiprofessional Edition to accelerate the incorporation of patient safety teaching into higher educational curricula. The World Health Organization Curriculum Guide uses a health system-focused, team-dependent approach, which impacts all health care professionals and students learning in an integrated way about how to operate within a culture of safety. The guide is pertinent in the context of global educational reforms and growing recognition of the need to introduce patient safety into health care professionals’ curricula. The guide helps to advance patient safety education worldwide in five ways. First, it addresses the variety of opportunities and contexts in which health care educators teach, and provides practical recommendations to learning. Second, it recommends shared learning by students of different professions, thus enhancing student capacity to work together effectively in multidisciplinary teams. Third, it provides guidance on a range of teaching methods and pedagogical activities to ensure that students understand that patient safety is a practical science teaching them to act in evidence-based ways to reduce patient risk. Fourth, it encourages supportive teaching and learning, emphasizing the need to establishing teaching environments in which students feel comfortable to learn and practice patient safety. Finally, it helps educators incorporate patient safety topics across all areas of clinical practice. PMID:25285012

Safety Psychology Applicating on Coal Mine Safety Management Based on Information System

Science.gov (United States)

Hou, Baoyue; Chen, Fei

In recent years, with the increase of intensity of coal mining, a great number of major accidents happen frequently, the reason mostly due to human factors, but human's unsafely behavior are affected by insecurity mental control. In order to reduce accidents, and to improve safety management, with the help of application security psychology, we analyse the cause of insecurity psychological factors from human perception, from personality development, from motivation incentive, from reward and punishment mechanism, and from security aspects of mental training , and put forward countermeasures to promote coal mine safety production,and to provide information for coal mining to improve the level of safety management.

46 CFR 197.326 - Oxygen safety.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Oxygen safety. 197.326 Section 197.326 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE OCCUPATIONAL SAFETY AND HEALTH STANDARDS GENERAL PROVISIONS Commercial Diving Operations Equipment § 197.326 Oxygen safety. (a) Equipment used with...

47 CFR 90.1335 - RF safety.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false RF safety. 90.1335 Section 90.1335 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND MOBILE RADIO SERVICES Wireless Broadband Services in the 3650-3700 MHz Band § 90.1335 RF safety...

29 CFR 1926.105 - Safety nets.

Science.gov (United States)

2010-07-01

... 29 Labor 8 2010-07-01 2010-07-01 false Safety nets. 1926.105 Section 1926.105 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Personal Protective and Life Saving Equipment § 1926.105...

Light water reactor safety

CERN Document Server

Pershagen, B

2013-01-01

This book describes the principles and practices of reactor safety as applied to the design, regulation and operation of light water reactors, combining a historical approach with an up-to-date account of the safety, technology and operating experience of both pressurized water reactors and boiling water reactors. The introductory chapters set out the basic facts upon which the safety of light water reactors depend. The central section is devoted to the methods and results of safety analysis. The accidents at Three Mile Island and Chernobyl are reviewed and their implications for light wate

Virtual Reality, Safety and Human Behaviour!

CERN Multimedia

CERN. Geneva

2018-01-01

The use of Virtual Reality (VR) environments opens the door to conduct hazard-free experiments aimed at understanding how people would behave in case of an emergency. The exploration of this systems would help to better design safety systems in complex scenarios to increase its safety robustness in case of unwanted events.

Challenges in promoting radiation safety culture

International Nuclear Information System (INIS)

Mod Ali, Noriah

2008-01-01

Safety has quickly become an industry performance measure, and the emphasis on its reliability has always been part of a strategic commitment. This paper presents an approach taken by Malaysian Nuclear Agency (Nuclear Malaysia) and authority to develop and implement safety culture for industries that uses radioactive material and radiation sources. Maintaining and improving safety culture is a continuous process. There is a need to establish a program to measure, review and audit health and safety performance against predetermined standards. Proper safety audit will help to identify the non-compliance of safety culture as well as the deviation of management, individual and policy level commitment; review of radiation protection program and activities should be preceded. (author)

Microbiological Food Safety Surveillance in China

Directory of Open Access Journals (Sweden)

Xiaoyan Pei

2015-08-01

Full Text Available Microbiological food safety surveillance is a system that collects data regarding food contamination by foodborne pathogens, parasites, viruses, and other harmful microbiological factors. It helps to understand the spectrum of food safety, timely detect food safety hazards, and provide relevant data for food safety supervision, risk assessment, and standards-setting. The study discusses the microbiological surveillance of food safety in China, and introduces the policies and history of the national microbiological surveillance system. In addition, the function and duties of different organizations and institutions are provided in this work, as well as the generation and content of the surveillance plan, quality control, database, and achievement of the microbiological surveillance of food safety in China.

Can microcredit help improve the health of poor women? Some findings from a cross-sectional study in Kerala, India.

Science.gov (United States)

Mohindra, Ks; Haddad, Slim; Narayana, D

2008-01-10

This study examines associations between female participation in a microcredit program in India, known as self help groups (SHGs), and women's health in the south Indian state of Kerala. Because SHGs do not have a formal health program, this provides a unique opportunity to assess whether SHG participation influences women's health via the social determinants of health. This cross-sectional study used special survey data collected in 2003 from one Panchayat (territorial decentralized unit). Information was collected on women's characteristics, health determinants (exclusion to health care, exposure to health risks, decision-making agency), and health achievements (self assessed health, markers of mental health). The study sample included 928 non elderly poor women. The primary finding is that compared to non-participants living in a household without a SHG member, the odds of facing exclusion is significantly lower among early joiners, women who were members for more than 2 years (OR = 0.58, CI = 0.41-0.80), late joiners, members for 2 years and less (OR = 0.60, CI = 0.39-0.94), and non-participants who live in a household with a SHG member (OR = 0.53, CI = 0.32-0.90). We also found that after controlling for key women's characteristics, early joiners of a SHG are less likely to report emotional stress and poor life satisfaction compared to non-members (OR = 0.52, CI = 0.30-0.93; OR = 0.32, CI = 0.14-0.71). No associations were found between SHG participation and self assessed health or exposure to health risks. The relationship between SHG participation and decision-making agency is unclear. Microcredit is not a panacea, but could help to improve the health of poor women by addressing certain issues relevant to the context. In Kerala, SHG participation can help protect poor women against exclusion to health care and possibly aid in promoting their mental health.

Tools to quantify safety culture

International Nuclear Information System (INIS)

Avella, B.

2011-01-01

This paper reviews the notion of safety culture and then describes some of the tools that can be used to assess it. Required characteristics to obtain reliable tools and techniques are provided, along with a short summary of the most common and important tools and techniques used to assess safety culture at the nuclear field is described. At the end of this paper, the reader will better understand the importance of the safety culture of the organization and will have requirements to help him in choosing reliable tools and techniques. Further, there will be recommendations on how best to follow-up after an assessment of safety culture. (author)

Analysis and design on airport safety information management system

Directory of Open Access Journals (Sweden)

Yan Lin

2017-01-01

Full Text Available Airport safety information management system is the foundation of implementing safety operation, risk control, safety performance monitor, and safety management decision for the airport. The paper puts forward the architecture of airport safety information management system based on B/S model, focuses on safety information processing flow, designs the functional modules and proposes the supporting conditions for system operation. The system construction is helpful to perfecting the long effect mechanism driven by safety information, continually increasing airport safety management level and control proficiency．

45 CFR 1310.21 - Safety education.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Safety education. 1310.21 Section 1310.21 Public... PROGRAM HEAD START TRANSPORTATION Special Requirements § 1310.21 Safety education. (a) Each agency must... children. The required transportation and pedestrian safety education of children and parents, except for...

47 CFR 101.1425 - RF safety.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false RF safety. 101.1425 Section 101.1425 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE... safety. MVDDS stations in the 12.2-12.7 GHz frequency band do not operate with output powers that equal...

14 CFR 31.63 - Safety belts.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Safety belts. 31.63 Section 31.63 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: MANNED FREE BALLOONS Design Construction § 31.63 Safety belts. (a) There must be a safety belt...

14 CFR 415.33 - Safety organization.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Safety organization. 415.33 Section 415.33....33 Safety organization. (a) An applicant shall maintain a safety organization and document it by... communication, both within the applicant's organization and between the applicant and any federal launch range...

View-CXS neutron and photon cross-sections viewer

International Nuclear Information System (INIS)

Subbaiah, K.V.; Sunil Sunny, C.

2004-01-01

A graphical user-friendly interface is developed in Visual Basic (VB)-6 to view the variation of neutron and photon interaction cross-sections of different isotopes as a function of energy. VB subroutines developed read the binary data files of cross-sections created in MCNP-ACE (Briesmeister, J.F., 1993. MCNP - a general purpose Monte Carlo N-Particle Transport code. Version 4A. LANL, USA), ANISN-DLC (Engle W.W. Jr., 1967, A User's Manual for ANISN, K-1693; ORNL, 1974. 100 group neutron cross section data based on ENDF/B-III. Oak Ridge National Laboratory, USA) and KENO-AMPX (Petrie, L.M., Landers, N.F., 1984 KENO-Va- An Improved Monte Carlo Criticality Program with Super Grouping. RSICC-CCC-548, USA) formats using LAHEY-77 Fortran Compiler. The information on isotopes present in each library will be displayed with the help of database files prepared using Micro-Soft ACESS. The cross-section data can be viewed in different presentation styles namely, line graphs, bar graphs, histograms etc., with different color and symbol options. The cross-section plots generated can be saved as Bit-Map file to embed in any other text files. This software enables inter comparison of cross-sections from different type of libraries for isotopes as well as mixtures. Provision is made to view the cross-sections for nuclear reactions such as (n,γ), (n,f), (n,α), etc. The software can be obtained from Radiation Safety Information and Computational Centre (RSICC), ORNL, USA with the code package identification number PSR-514. The software package needs a hard disk space of about 80 MB when installed and works in WINDOWS-95/98/2000 operating systems

The association between patient safety culture and burnout and sense of coherence: A cross-sectional study in restructured and not restructured intensive care units.

Science.gov (United States)

Vifladt, Anne; Simonsen, Bjoerg O; Lydersen, Stian; Farup, Per G

2016-10-01

To study the associations between registered nurses' (RNs) perception of the patient safety culture (safety culture) and burnout and sense of coherence, and to compare the burnout and sense of coherence in restructured and not restructured intensive care units (ICUs). Cross-sectional study. RNs employed at seven ICUs in six hospitals at a Norwegian Hospital Trust. One to four years before the study, three hospitals merged their general and medical ICUs into one general mixed ICU. The safety culture, burnout and sense of coherence were measured with the questionnaires Hospital Survey on Patient Safety Culture, Bergen Burnout Indicator and Sense of Coherence. Participant characteristics and working in restructured and not restructured ICUs were registered. In total, 143/289(49.5%) RNs participated. A positive safety culture was statistically significantly associated with a low score for burnout and a strong sense of coherence. No statistically significant differences were found in burnout and sense of coherence between RNs in the restructured and not restructured ICUs. In this study, a positive safety culture was associated with absence of burnout and high ability to cope with stressful situations. Burnout and sense of coherence were independent of the restructuring process. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

75 FR 56549 - National Institute for Occupational Safety and Health (NIOSH), Safety and Occupational Health...

Science.gov (United States)

2010-09-16

... Suites Hotel, 1900 Diagonal Road, Alexandria, Virginia, 22314, Telephone (703) 684-5900, Fax (703) 684... conduct of Study Section business and for the study section to consider safety and occupational health...

29 CFR 500.100 - Vehicle safety obligations.

Science.gov (United States)

2010-07-01

... safety standards. Prima facie evidence that safety standards have been met will be shown by the presence... 29 Labor 3 2010-07-01 2010-07-01 false Vehicle safety obligations. 500.100 Section 500.100 Labor... § 500.100 Vehicle safety obligations. (a) General obligations. Each farm labor contractor, agricultural...

21 CFR 315.6 - Evaluation of safety.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Evaluation of safety. 315.6 Section 315.6 Food and... USE DIAGNOSTIC RADIOPHARMACEUTICALS § 315.6 Evaluation of safety. (a) Factors considered in the safety...)(1) To establish the safety of a diagnostic radiopharmaceutical, FDA may require, among other...

International cooperation in nuclear safety

International Nuclear Information System (INIS)

Rosen, M.

1991-01-01

The mechanisms of international co-operations, co-ordinated by International Atomic Energy Agency, are presented. These co-operations are related to international safety standards, to the safety of the four hundred existing reactors in operation, to quick help and information in case of emergency, and to the already valid international conventions. The relation between atomic energy and environmental protection is also discussed briefly. (K.A.)

The evolution of cryogenic safety at Fermilab

International Nuclear Information System (INIS)

Stanek, R.; Kilmer, J.

1992-12-01

Over the past twenty-five years, Fermilab has been involved in cryogenic technology as it relates to pursuing experimentation in high energy physics. The Laboratory has instituted a strong cryogenic safety program and has maintained a very positive safety record. The solid commitment of management and the cryogenic community to incorporating safety into the system life cycle has led to policies that set requirements and help establish consistency for the purchase and installation of equipment and the safety analysis and documentation

The safety of the AGR

International Nuclear Information System (INIS)

Dale, G.C.; Bowerman, J.M.

1982-01-01

The publication is in 10 parts. Section 1 describes regulatory control of the nuclear industry in the UK and outlines the principal Acts of Parliament and international regulations currently in force in the licensing of nuclear power stations. Section 2 discusses the responsibilities laid on licensees of nuclear sites for ensuring the safety of their employees and members of the public. In Section 3, a comprehensive description of the Advanced Gas-cooled Reactor (AGR) system and its principal components is given. The safety features are described in Section 4. Radiological effects are described in Section 5. Section 6 explains how different types of radioactive wastes arise and describes their management and plans for their long-term disposal. Section 7 deals with the transportation of fuel and radioactive waste. Section 8 is devoted to fault conditions; the steps taken to ensure adequate protection against faults and the reliability of plant are described. Liaison with local communities is discussed in Section 9; the role of the Local Liaison Committees is described and details of emergency plans are given. The final section covers the decommissioning and dismantling of power stations after they have reached the end of their useful lives. (author)

47 CFR 101.1525 - RF safety.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false RF safety. 101.1525 Section 101.1525 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Service and Technical Rules for the 70/80/90 GHz Bands § 101.1525 RF safety. Licensees in the 70...

46 CFR 169.723 - Safety belts.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Safety belts. 169.723 Section 169.723 Shipping COAST... Control, Miscellaneous Systems, and Equipment § 169.723 Safety belts. Each vessel must carry a harness type safety belt conforming to Offshore Racing Council (ORC) standards for each person on watch or...

14 CFR 431.33 - Safety organization.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Safety organization. 431.33 Section 431.33... Launch and Reentry of a Reusable Launch Vehicle § 431.33 Safety organization. (a) An applicant shall maintain a safety organization and document it by identifying lines of communication and approval authority...

Radiation safety without borders initiative

International Nuclear Information System (INIS)

Dibblee, Martha; Dickson, Howard; Krieger, Ken; Lopez, Jose; Waite, David; Weaver, Ken

2008-01-01

The Radiation Safety Without Borders (RSWB) initiative provides peer support to radiation safety professionals in developing countries, which bolsters the country's infrastructure and may lead the way for IRPA Associate membership. The Health Physics Society (HPS) recognizes that many nations do not possess the infrastructure to adequately control and beneficially use ionizing radiation. In a substantial number of countries, organized radiation protection programs are minimal. The RSWB initiative relies on HPS volunteers to assist their counterparts in developing countries with emerging health physics and radiation safety programs, but whose resources are limited, to provide tools that promote and support infrastructure and help these professionals help themselves. RSWB experience to date has shown that by providing refurbished instruments, promoting visits to a HPS venue, or visiting a country just to look provide valuable technical and social infrastructure experiences often missing in the developing nation's cadre of radiation safety professionals. HPS/RSWB with the assistance of the International Atomic Energy Agency (IAEA) pairs chapters with a country, with the expectation that the country's professional radiation safety personnel will form a foreign HPS chapter, and the country eventually will become an IRPA Associate. Although still in its formative stage, RSWB nonetheless has gotten valuable information in spite of the small number of missions. The RSWB initiative continues to have significant beneficial impacts, including: Improving the radiation safety infrastructure of the countries that participate; Assisting those countries without professional radiation safety societies to form one; Strengthening the humanitarian efforts of the United States; Enhancing Homeland Security efforts through improved control of radioactive material internationally. Developing countries, including those in Latin America, underwritten by IAEA, may take advantage of resources

A compact fast-neutron producing target for high resolution cross section measurements

NARCIS (Netherlands)

Flaska, M.

2006-01-01

A proper knowledge of neutron cross sections is very important for the operation safety of various nuclear facilities. Reducing uncertainties in the neutron cross sections can lead to an enhanced safety of present and future nuclear power systems. Accurate neutron cross sections also play a relevant

The work environment and empowerment as predictors of patient safety culture in Turkey.

Science.gov (United States)

Dirik, Hasan Fehmi; Intepeler, Seyda Seren

2017-05-01

As scant research based information is available regarding the work environment, empowerment and patient safety culture, this study from a developing country (Turkey) in which health care institutions are in a state of transition, aimed to investigate further the relationships between these three variables. A cross-sectional descriptive design was employed. The sample comprised 274 nurse participants working in a university hospital located in Izmir (Turkey). In data evaluation, descriptive statistics and hierarchical regression analyses were applied. The work environment and structural empowerment were related to the patient safety culture and explained 55% of the variance in patient safety culture perceptions. 'Support for optimal patient care', 'nurse/physician relationships' and 'staff involvement in organisational affairs' were the significant predictors. An enhancement of the work environment and providing access to empowerment structures may help health care organisations improve the patient safety culture. In light of the findings, the following actions can be recommended to inform health care leaders: providing necessary resources for nursing practise, encouraging nurses' participation in decision-making, strengthening communication within the team and giving nurses the opportunities to cope with challenging work problems to learn and grow. © 2017 John Wiley & Sons Ltd.

40 CFR 240.209 - Safety.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Safety. 240.209 Section 240.209 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures § 240.209 Safety. ...

HELPFUL ASPECTS OF THE THERAPEUTIC RELATIONSHIP IN INTEGRATIVE PSYCHOTHERAPY

Directory of Open Access Journals (Sweden)

Karmen Urška Modic

2015-12-01

Full Text Available This article describes a qualitative study of helpful aspects of the therapeutic relationship in Integrative Psychotherapy. Participants of the study were sixteen clients who were in the process of Integrative Psychotherapy for at least a year. Participants were interviewed with the adapted version of the Change Interview (Elliott, 1999, which involves a semi-structured empathic exploration of the client's experience in therapy. The analysis of the clients’ experience of Integrative Psychotherapy revealed six categories of helpful aspects of therapeutic relationship: the therapist’s empathic attunement, the therapist’s acceptance, the match between the client and the therapist, feelings of trust and safety, feeling of connection, and experience of a new relational experience. Based on results of the research, we developed a model of the healing relationship in integrative psychotherapy. This model describes the interrelatedness of these six helpful aspects of the therapeutic relationship. The categories of empathic attunement and acceptance proved to be the most important categories relating to the therapist’s contribution to the healing therapeutic relationship. Clients described that the therapist’s empathic attunement and acceptance influenced the development of safety and trust, feelings of connection and promotion of new relational experiences. The results of this study are discussed in relation to the theories of Integrative Psychotherapy and research regarding the therapeutic relationship in psychotherapy.

Teaching Primary Science: How Research Helps

Science.gov (United States)

Harlen, Wynne

2010-01-01

The very first edition of "Primary Science Review" included an article entitled "Teaching primary science--how research can help" (Harlen, 1986), which announced that a section of the journal would be for reports of research and particularly for teachers reporting their classroom research. The intervening 24 years have seen…

Women Empowerment Through Self-Help Groups

NARCIS (Netherlands)

Alemu, Sintayehu Hailu; Kempen, Van Luuk; Ruben, Ruerd

2018-01-01

This paper deals with the impact of self-help groups (SHGs) in apple production on empowering women in the Chencha district of Southern Ethiopia. Impact is traced on the basis of a cross-sectional survey among SHG members and nonmembers, using propensity score matching. Apart from the attitudinal

First Aid and Safety

Science.gov (United States)

... Staying Safe Videos for Educators Search English Español First Aid & Safety Keeping your child safe is your top ... do in an emergency, how to stock a first-aid kit, where to call for help, and more. ...

Cancer symptom awareness and barriers to medical help seeking in Scottish adolescents: a cross-sectional study

OpenAIRE

Hubbard, Gill; Macmillan, Iona; Canny, Anne; Forbat, Liz; Neal, Richard D; O’Carroll, Ronan E; Haw, Sally; Kyle, Richard G

2014-01-01

Background Initiatives to promote early diagnosis include raising public awareness of signs and symptoms of cancer and addressing barriers to seeking medical help about cancer. Awareness of signs and symptoms of cancer and emotional barriers, such as, fear, worry, and embarrassment strongly influence help seeking behaviour. Whether anxiety influences seeking medical help about cancer is not known. The purpose of this study about adolescents was to examine: 1) the relationship between contextu...

29 CFR 1977.5 - Persons protected by section 11(c).

Science.gov (United States)

2010-07-01

... OCCUPATIONAL SAFETY AND HEALTH ACT OF 1970 General § 1977.5 Persons protected by section 11(c). (a) All employees are afforded the full protection of section 11(c). For purposes of the Act, an employee is defined... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION...

14 CFR 34.6 - Aircraft safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Aircraft safety. 34.6 Section 34.6... safety. (a) The provisions of this part will be revised if at any time the Administrator determines that an emission standard cannot be met within the specified time without creating a safety hazard. (b...

31 CFR 560.528 - Aircraft safety.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Aircraft safety. 560.528 Section 560..., Authorizations and Statements of Licensing Policy § 560.528 Aircraft safety. Specific licenses may be issued on a... the safety of civil aviation and safe operation of U.S.-origin commercial passenger aircraft. ...

Communication of geo-scientific safety arguments

International Nuclear Information System (INIS)

Flavelle, P.; Goodwin, B.; Jensen, M.; Linden, R.; Mazurek, M.; Srivastave, M.; Strom, A.; Sudicky, E.; Voinis, S.

2007-01-01

Working Group B addressed the communication of geo-scientific safety arguments through a discussion of practical experience as it related to the methods, types of information and specific arguments found to best communicate geo-scientific concepts and notions of safety with broad audiences including, colleagues, authorities and regulators, political decision makers, academics, and the general public. The following questions were suggested by the programme committee of the AMIGO-2 workshop for discussion by Working Group B with respect to the communication of geo-scientific information and safety arguments: - What is the place of geo-scientific arguments in relation to quantitative and qualitative topics like scenario and FEPs (features, events, processes) assessment, simulated repository evolution, calculated dose or risk impacts, engineering tests of materials, etc., when presenting a safety case to different audiences and with respect to the various stages of the repository programme? (see section 3). - Would we be better off focusing messages to the public on time scales of a few hundred years or a few generations? (see section 4). - How do you handle the fact that geoscience interpretations seldom are unique and data often are open to various interpretations? (see section 5). - How do you handle expert controversy on a specific topic? (see section 6). (authors)

Tank farms criticality safety manual

International Nuclear Information System (INIS)

FORT, L.A.

2003-01-01

This document defines the Tank Farms Contractor (TFC) criticality safety program, as required by Title 10 Code of Federal Regulations (CFR-), Subpart 830.204(b)(6), ''Documented Safety Analysis'' (10 CFR- 830.204 (b)(6)), and US Department of Energy (DOE) 0 420.1A, Facility Safety, Section 4.3, ''Criticality Safety.'' In addition, this document contains certain best management practices, adopted by TFC management based on successful Hanford Site facility practices. Requirements in this manual are based on the contractor requirements document (CRD) found in Attachment 2 of DOE 0 420.1A, Section 4.3, ''Nuclear Criticality Safety,'' and the cited revisions of applicable standards published jointly by the American National Standards Institute (ANSI) and the American Nuclear Society (ANS) as listed in Appendix A. As an informational device, requirements directly imposed by the CRD or ANSI/ANS Standards are shown in boldface. Requirements developed as best management practices through experience and maintained consistent with Hanford Site practice are shown in italics. Recommendations and explanatory material are provided in plain type

Radio-Isotopes Section, radiation Safety Division, Ministry Of The Environment, Israel: A General Review, And Future Developments

International Nuclear Information System (INIS)

Ben-Zion, S.

1999-01-01

The section of radio-isotopes in the Ministry Of Environment, is responsible for preventing environmental hazards fi.om radio-isotopes ''from cradle to grave's'. The management and the supervision of radioactive materials, includes about 350 institutes in Israel. We are dealing with the implementation and the enforcement of the environmental regulations and safety standards, and licensing for each institution and installation. Among our tasks are the following: Follow-up of the import, transportation and distribution, usage and storage and disposal of radio-isotopes, as well as legislation, risk-assessments, inspection, , and ''education'. We are also participating in committees / working groups discussing specific topics: Radioactive stores, Low RW disposal, Y2K, GIS, penalties charging, transportation and more

Archetypes for Organisational Safety

Science.gov (United States)

Marais, Karen; Leveson, Nancy G.

2003-01-01

We propose a framework using system dynamics to model the dynamic behavior of organizations in accident analysis. Most current accident analysis techniques are event-based and do not adequately capture the dynamic complexity and non-linear interactions that characterize accidents in complex systems. In this paper we propose a set of system safety archetypes that model common safety culture flaws in organizations, i.e., the dynamic behaviour of organizations that often leads to accidents. As accident analysis and investigation tools, the archetypes can be used to develop dynamic models that describe the systemic and organizational factors contributing to the accident. The archetypes help clarify why safety-related decisions do not always result in the desired behavior, and how independent decisions in different parts of the organization can combine to impact safety.

29 CFR 1926.21 - Safety training and education.

Science.gov (United States)

2010-07-01

... 29 Labor 8 2010-07-01 2010-07-01 false Safety training and education. 1926.21 Section 1926.21... Provisions § 1926.21 Safety training and education. (a) General requirements. The Secretary shall, pursuant to section 107(f) of the Act, establish and supervise programs for the education and training of...

Safety Bulletin 2014-1

CERN Multimedia

HSE Unit

2014-01-01

The HSE Unit would like to inform you that Safety Bulletin 2014-1 entitled “Call for help!” has just been released.   The Bulletin is available on EDMS under the following number: 1346313. We would like to remind you that HSE Safety Bulletins are published in English and French, and incorporate feedback from incidents/near misses/accidents that have occurred on the CERN site with the aim of improving prevention. We remain at your disposal in case you have further questions.

40 CFR 257.3-8 - Safety.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Safety. 257.3-8 Section 257.3-8... and Practices § 257.3-8 Safety. (a) Explosive gases. The concentration of explosive gases generated by... shall not pose a hazard to the safety of persons or property from fires. This may be accomplished...

LTE for public safety

CERN Document Server

Liebhart, Rainer; Wong, Curt; Merkel , Jürgen

2015-01-01

The aim of the book is to educate government agencies, operators, vendors and other regulatory institutions how LTE can be deployed to serve public safety market and offer regulatory / public safety features. It is written in such a way that it can be understood by both technical and non-technical personnel with just introductory knowledge in wireless communication. Some sections and chapters about public safety services offered by LTE network are intended to be understood by anyone with no knowledge in wireless communication.

International Aspects of Nuclear Safety

International Nuclear Information System (INIS)

Lash, T.R.

2000-01-01

Even though not all the world's nations have developed a nuclear power industry, nuclear safety is unquestionably an international issue. Perhaps the most compelling proof is the 1986 accident at Chornobyl nuclear power plant in what is now Ukraine. The U.S. Department of Energy conducts a comprehensive, cooperative effort to reduce risks at Soviet-designed nuclear power plants. In the host countries : Armenia, Ukraine, Russia, Bulgaria, the Czech Republic, Hungary, Lithuania, Slovakia, and Kazakhstan joint projects are correcting major safety deficiencies and establishing nuclear safety infrastructures that will be self-sustaining.The U.S. effort has six primary goals: 1. Operational Safety - Implement the basic elements of operational safety consistent with internationally accepted practices. 2. Training - Improve operator training to internationally accepted standards. 3. Safety Maintenance - Help establish technically effective maintenance programs that can ensure the reliability of safety-related equipment. 4. Safety Systems - Implement safety system improvements consistent with remaining plant lifetimes. 5. Safety Evaluations - Transfer the capability to conduct in-depth plant safety evaluations using internationally accepted methods. 6. Legal and Regulatory Capabilities - Facilitate host-country implementation of necessary laws and regulatory policies consistent with their international treaty obligations governing the safe use of nuclear power

76 FR 3908 - Safety and Occupational Health Study Section (SOHSS); National Institute for Occupational Safety...

Science.gov (United States)

2011-01-21

..., 2011 (Closed). Place: Embassy Suites Hotel, 1900 Diagonal Road, Alexandria, Virginia 22314, Telephone... address matters related to the conduct of Study Section business and for the study section to consider...

Hospital safety climate and safety behavior: A social exchange perspective.

Science.gov (United States)

Ancarani, Alessandro; Di Mauro, Carmela; Giammanco, Maria D

Safety climate is considered beneficial to the improvement of hospital safety outcomes. Nevertheless, the relations between two of its key constituents, namely those stemming from leader-subordinate relations and coworker support for safety, are still to be fully ascertained. This article uses the theoretical lens of Social Exchange Theory to study the joint impact of leader-member exchange in the safety sphere and coworker support for safety on safety-related behavior at the hospital ward level. Social exchange constructs are further related to the existence of a shame-/blame-free environment, seen as a potential antecedent of safety behavior. A cross-sectional study including 166 inpatients in hospital wards belonging to 10 public hospitals in Italy was undertaken to test the hypotheses developed. Hypothesized relations have been analyzed through a fully mediated multilevel structural equation model. This methodology allows studying behavior at the individual level, while keeping into account the heterogeneity among hospital specialties. Results suggest that the linkage between leader support for safety and individual safety behavior is mediated by coworker support on safety issues and by the creation of a shame-free environment. These findings call for the creation of a safety climate in which managerial efforts should be directed not only to the provision of new safety resources and the enforcement of safety rules but also to the encouragement of teamwork and freedom to report errors as ways to foster the capacity of the staff to communicate, share, and learn from each other.

The association between EMS workplace safety culture and safety outcomes.

Science.gov (United States)

Weaver, Matthew D; Wang, Henry E; Fairbanks, Rollin J; Patterson, Daniel

2012-01-01

Prior studies have highlighted wide variation in emergency medical services (EMS) workplace safety culture across agencies. To determine the association between EMS workplace safety culture scores and patient or provider safety outcomes. We administered a cross-sectional survey to EMS workers affiliated with a convenience sample of agencies. We recruited these agencies from a national EMS management organization. We used the EMS Safety Attitudes Questionnaire (EMS-SAQ) to measure workplace safety culture and the EMS Safety Inventory (EMS-SI), a tool developed to capture self-reported safety outcomes from EMS workers. The EMS-SAQ provides reliable and valid measures of six domains: safety climate, teamwork climate, perceptions of management, working conditions, stress recognition, and job satisfaction. A panel of medical directors, emergency medical technicians and paramedics, and occupational epidemiologists developed the EMS-SI to measure self-reported injury, medical errors and adverse events, and safety-compromising behaviors. We used hierarchical linear models to evaluate the association between EMS-SAQ scores and EMS-SI safety outcome measures. Sixteen percent of all respondents reported experiencing an injury in the past three months, four of every 10 respondents reported an error or adverse event (AE), and 89% reported safety-compromising behaviors. Respondents reporting injury scored lower on five of the six domains of safety culture. Respondents reporting an error or AE scored lower for four of the six domains, while respondents reporting safety-compromising behavior had lower safety culture scores for five of the six domains. Individual EMS worker perceptions of workplace safety culture are associated with composite measures of patient and provider safety outcomes. This study is preliminary evidence of the association between safety culture and patient or provider safety outcomes.

76 FR 52330 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2011-08-22

...). Place: Embassy Suites, 1900 Diagonal Road, Alexandria, Virginia 22314, Telephone: (703) 684-5900, Fax... convene to address matters related to the conduct of Study Section business and for the study section to...

77 FR 51810 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2012-08-27

...). Place: Embassy Suites, 1900 Diagonal Road, Alexandria, Virginia 22314, Telephone: (703) 684-5900, Fax... convene to address matters related to the conduct of Study Section business and for the study section to...

77 FR 4048 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2012-01-26

...). Place: Embassy Suites, 1900 Diagonal Road, Alexandria, Virginia 22314, Telephone: (703) 684-5900, Fax... convene to address matters related to the conduct of Study Section business and for the study section to...

Compensatory help-seeking in young and older adults: does seeking help, help?

Science.gov (United States)

Alea, Nicole; Cunningham, Walter R

2003-01-01

Asking other people for help is a compensatory behavior that may be useful across the life span to enhance functioning. Seventy-two older and younger men and women were either allowed to ask for help or were not allowed to ask for help while solving reasoning problems. Although the older adults answered fewer problems correctly, they did not seek additional help to compensate for their lower levels of performance. Younger adults sought more help. There were no age differences, however, in the types of help sought: indirect help (e.g., hints) was sought more often than direct help (e.g., asking for the answer). Exploratory analyses revealed that one's ability level was a better indicator than age of the utility of help-seeking. Findings are interpreted in the context of social and task-related influences on the use of help-seeking as a compensatory behavior across the life span.

Facts about Hospital Worker Safety

Science.gov (United States)

... statistics show that hospitals are still relatively hazardous workplaces, and they have much room to improve. OSHA has developed this factbook to help hospital safety managers and other stakeholders understand the challenges of worker ...

The Fukushima Daiichi Accident. Technical Volume 2/5. Safety Assessment

International Nuclear Information System (INIS)

2015-08-01

Technical Volume 1 of this report has described what happened during the accident at the Fukushima Daiichi nuclear power plant (NPP). This volume begins (Section 2.1) with a review of how the design basis of the site for external events was assessed initially and then reassessed over the life of the NPP. The section also describes the physical changes that were made to the units as a result. The remainder of the volume describes the treatment of beyond design basis events in the safety assessment of the site, the accident management provisions, the effectiveness of regulatory programmes, human and organizational factors and the safety culture, and the role of operating experience. Further background information is contained in three annexes included on the CD-ROM of this Technical Volume which describe analytical investigations of the accident along with information on topics such as system performance, defence in depth and severe accident phenomena. Section 2.2 provides an assessment of the systems that failed, resulting in a failure to maintain the fundamental safety functions in Units 1–3, which were in operation at the time of the tsunami and in which the reactor pressure vessels (RPV) and containment vessels failed. The section also describes Units 4-6, which were shut down at the time of the tsunami, and the site’s central spent fuel storage facility. Section 2.3 discusses the probabilistic and deterministic safety assessments of beyond design basis accidents (BDBAs) that had been performed for the plant and the insights from these assessments that had led to changes in the plant’s design. The section pays particular attention to the assessment of extreme natural hazards, such as the one which led to the total loss of AC power supply on the site. The additional loss of DC power supply in Units 1 and 2 played a key role in the progression of the accident because it impeded the diagnosis of plant conditions and made the operators unaware of the status of

14 CFR 23.303 - Factor of safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Factor of safety. 23.303 Section 23.303... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Structure General § 23.303 Factor of safety. Unless otherwise provided, a factor of safety of 1.5 must be used. ...

28 CFR 345.83 - Job safety training.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Job safety training. 345.83 Section 345... INDUSTRIES (FPI) INMATE WORK PROGRAMS FPI Inmate Training and Scholarship Programs § 345.83 Job safety training. FPI provides inmates with regular job safety training which is developed and scheduled in...

Official communication of the Safety Commission

CERN Multimedia

DG Unit

2009-01-01

The Prevention and Training section of the Safety Commission, would like to inform you that the new Safety Awareness course for newcomers will replace the welcome video in building 55 as of 2 April. The 3 levels (‘Safety at CERN’, ‘General Risks’ and ‘Specific Risks’) followed by 3 tests will determine access to CERN. Thanks to the SIR (Safety Information Registration, http://sir.cern.ch) application, it will be possible for you to follow the awareness course from your computer. For more information, go to the Safety Commission web site: http://safety-commission.web.cern.ch

Official communication of the Safety Commission

CERN Multimedia

DG Unit

2009-01-01

We, the Prevention and Training section of the Safety Commission, would like to inform you that the new Safety Awareness course for newcomers will replace the welcome video in building 55 as of the 2nd April. The 3 levels (‘Safety at CERN’, ‘General Risks’ and ‘Specific Risks’) followed by 3 tests will determine access to CERN. Thanks to the SIR (Safety Information Registration, http://sir.cern.ch) application, it will be possible for you to follow the awareness course from your computer. For more information, go to the Safety Commission web site: http://safety-commission.web.cern.ch

Health, Safety, and Environment Division

Energy Technology Data Exchange (ETDEWEB)

Wade, C [comp.

1992-01-01

The primary responsibility of the Health, Safety, and Environmental (HSE) Division at the Los Alamos National Laboratory is to provide comprehensive occupational health and safety programs, waste processing, and environmental protection. These activities are designed to protect the worker, the public, and the environment. Meeting these responsibilities requires expertise in many disciplines, including radiation protection, industrial hygiene, safety, occupational medicine, environmental science and engineering, analytical chemistry, epidemiology, and waste management. New and challenging health, safety, and environmental problems occasionally arise from the diverse research and development work of the Laboratory, and research programs in HSE Division often stem from these applied needs. These programs continue but are also extended, as needed, to study specific problems for the Department of Energy. The results of these programs help develop better practices in occupational health and safety, radiation protection, and environmental science.

Can microcredit help improve the health of poor women? Some findings from a cross-sectional study in Kerala, India

Directory of Open Access Journals (Sweden)

Haddad Slim

2008-01-01

Full Text Available Abstract Background This study examines associations between female participation in a microcredit program in India, known as self help groups (SHGs, and women's health in the south Indian state of Kerala. Because SHGs do not have a formal health program, this provides a unique opportunity to assess whether SHG participation influences women's health via the social determinants of health. Methods This cross-sectional study used special survey data collected in 2003 from one Panchayat (territorial decentralized unit. Information was collected on women's characteristics, health determinants (exclusion to health care, exposure to health risks, decision-making agency, and health achievements (self assessed health, markers of mental health. The study sample included 928 non elderly poor women. Results The primary finding is that compared to non-participants living in a household without a SHG member, the odds of facing exclusion is significantly lower among early joiners, women who were members for more than 2 years (OR = 0.58, CI = 0.41–0.80, late joiners, members for 2 years and less (OR = 0.60, CI = 0.39–0.94, and non-participants who live in a household with a SHG member (OR = 0.53, CI = 0.32–0.90. We also found that after controlling for key women's characteristics, early joiners of a SHG are less likely to report emotional stress and poor life satisfaction compared to non-members (OR = 0.52, CI = 0.30–0.93; OR = 0.32, CI = 0.14–0.71. No associations were found between SHG participation and self assessed health or exposure to health risks. The relationship between SHG participation and decision-making agency is unclear. Conclusion Microcredit is not a panacea, but could help to improve the health of poor women by addressing certain issues relevant to the context. In Kerala, SHG participation can help protect poor women against exclusion to health care and possibly aid in promoting their mental health.

Codeine use, dependence and help-seeking behaviour in the UK and Ireland: an online cross-sectional survey.

Science.gov (United States)

Kimergård, A; Foley, M; Davey, Z; Dunne, J; Drummond, C; Deluca, P

2017-09-01

Codeine misuse and dependence poses a clinical and public health challenge. However, little is known about dependence and treatment needs in the UK and Ireland. To characterize codeine use, dependence and help-seeking behaviour. An online cross-sectional survey advertised on Facebook, Twitter, health and drug websites and e-mail circulars. The survey collected data on demographics and codeine use amongst adults from the UK and Ireland. The Severity of Dependence Scale measured the level of codeine dependence. The sample of 316 respondents had a mean age of 35.3 years (SD = 12.3) and 67% were women. Of the 316 respondents, 54 scored ≥5 on the Severity of Dependence Scale indicating codeine dependence (17.1%). Our study found that codeine dependence is a problem with both prescribed and 'over-the-counter' codeine. Codeine dependence was associated with daily use of codeine, faking or exaggerating symptoms to get a prescription for codeine and 'pharmacy shopping' ( P addiction treatment demand through increased identification and referrals in primary care. © The Author 2017. Published by Oxford University Press on behalf of the Association of Physicians. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Occupational Safety and Health Management System (OSHMS)

International Nuclear Information System (INIS)

Shyen, A.K.S.; Mohd Khairul Hakimin; Manisah Saedon

2011-01-01

Safe work environment has always been one of the major concerns at workplace. For this, Occupational Safety and Health Act 1994 has been promulgated for all workplaces to ensure the Safety, Health and Welfare of its employees and any person at workplaces. Malaysian Nuclear Agency therefore has started the initiative to review and improve the current Occupational Safety and Health Management System (OSHMS) by going for OHSAS 18001:2007 and MS 1722 standards certification. This would also help in our preparation to bid as the TSO (Technical Support Organization) for the NPP (Nuclear Power Plant) when it is established. With a developed and well maintained OSHMS, it helps to create a safe working condition and thus enhancing the productivity, quality and good morale. Ultimately, this will lead to a greater organization profit. However, successful OSHMS requires full commitment and support from all level of the organization to work hand in hand in implementing the safety and health policy. Therefore it is essential for all to acknowledge the progress of the implementation and be part of it. (author)

French safety and criticality testing programmes

International Nuclear Information System (INIS)

Barbry, F.; Leclerc, J.; Manaranche, J.C.; Maubert, L.

1982-01-01

This article underlines the need to include experimental safety-criticality programmes in the French nuclear effort. The means and methods used at the Section of Experimental Nuclear Safety and Criticality Research, attached to the CEA Valduc Centre, are described. Three experimental programmes are presented: safety-criticality of the PWR fuel cycle, neutron poisoning of plutonium solutions by gadolinium and safety-criticality of slightly enriched and slightly moderated uranium oxide. Criticality accidents studies in solution are then described [fr

49 CFR 211.61 - Informal safety inquiries.

Science.gov (United States)

2010-10-01

... information on selected topics relating to railroad safety. A notice of each such inquiry will be published in... 49 Transportation 4 2010-10-01 2010-10-01 false Informal safety inquiries. 211.61 Section 211.61..., DEPARTMENT OF TRANSPORTATION RULES OF PRACTICE Miscellaneous Safety-Related Proceedings and Inquiries § 211...

46 CFR 62.35-10 - Flooding safety.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Flooding safety. 62.35-10 Section 62.35-10 Shipping... Requirements for Specific Types of Automated Vital Systems § 62.35-10 Flooding safety. (a) Automatic bilge.... (b) Remote controls for flooding safety equipment must remain functional under flooding conditions to...

30 CFR 56.4402 - Safety can use.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Safety can use. 56.4402 Section 56.4402 Mineral... and Combustible Liquids and Gases § 56.4402 Safety can use. Small quantities of flammable liquids drawn from storage shall be kept in safety cans labeled to indicate the contents. ...

30 CFR 57.4402 - Safety can use.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Safety can use. 57.4402 Section 57.4402 Mineral... Flammable and Combustible Liquids and Gases § 57.4402 Safety can use. Small quantities of flammable liquids drawn from storage shall be kept in safety cans labeled to indicate the contents. ...

20 CFR 401.160 - Health or safety.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Health or safety. 401.160 Section 401.160... INFORMATION Disclosure of Official Records and Information § 401.160 Health or safety. The Privacy Act allows us to disclose information in compelling circumstances where an individual's health or safety is...

45 CFR 1321.75 - Licenses and safety.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Licenses and safety. 1321.75 Section 1321.75... AND COMMUNITY PROGRAMS ON AGING Service Requirements § 1321.75 Licenses and safety. The State shall... that the facility complies with all applicable State and local health, fire, safety, building, zoning...

The International Technical Safety Forum

CERN Multimedia

CERN Bulletin

2010-01-01

The International Technical Safety Forum is a meeting of safety experts from several physics labs in Europe and the US. Since 1998 participants have been meeting every couple of years to discuss common challenges in safety matters. The Forum helps them define best practices and learn from the important lessons learned by others.   The Forum's participants in front of building 40. This year, the meeting took place at CERN from 12 to 16 April. “This year's meeting covered subjects ranging from communication and training in matters of safety, to cryogenic safety, emergency preparedness and risk analysis”, explains Ralf Trant, head of the CERN Safety Commission and organiser of this year’s Forum. Radiation protection issues are not discussed at the meeting since they involve different expertise. The goal of the Forum is to allow participants to share experience, learn lessons and acquire specific knowledge in a very open way. Round-table discussions, dedicated time for ...

Annual Safety Report 1981

International Nuclear Information System (INIS)

1982-09-01

A safety report from Section K (Nuclear Physics) of the Dutch National Institute for Nuclear and High Energy Physics is presented for 1981. The report begins with general matters concerning safety policy at NIKHEF, licences and expenditure. Works accidents (none of them radiological) are detailed and accident prevention considered. The measurement programme for neutron radiation in the vicinity of the accelerator is described and the results are discussed. The means and results of personnel dosimetry are also presented. The report is concluded with a list of publications concerning safety aspects at NIKHEF. (C.F.)

Raising positive expectations helps patients with minor ailments: A cross-sectional study

Directory of Open Access Journals (Sweden)

Schellevis François

2008-06-01

Full Text Available Abstract Background Consultations for minor ailments constitute a large part of the workload of general practitioners (GPs. As medical interventions are not always available, specific communication strategies, such as active listening and positive communication, might help GPs to handle these problems adequately. This study examines to what extent GPs display both strategies during consultations for minor ailments and investigates how each of these relate to the patients' perceived health, consultation frequency and medication adherence. Methods 524 videotaped consultations between Dutch GPs and patients aged 18 years or older were selected. All patients presented a minor ailment, and none of them suffered from a diagnosed chronic illness. The observation protocol included the validated Active Listening Observation Scale (ALOS-global, as well as three domains of positive communication, i.e. providing reassurance, a clear explanation, and a favourable prognosis. Patients completed several questionnaires before, immediately after, and two weeks after the consultation. These included measures for state anxiety (STAI, functional health status (COOP/WONCA charts and medication adherence (MAQ. Consultation frequency was available from an ongoing patient registration. Data were analysed using multivariate regression analyses. Results Reassurance was related to patients' better overall health. Providing a favourable prognosis was linked to patients feeling better, but only when accompanied by a clear explanation of the complaints. A clear explanation was also related to patients feeling better and less anxious, except when patients reported a low mood pre-visit. Active listening alone was positively associated with patients feeling worse. Among patients in a good mood state, active listening was associated with less adherence. Conclusion To some extent, it seems helpful when GPs are at the same time clear and optimistic about the nature and course of

Raising positive expectations helps patients with minor ailments: a cross-sectional study.

Science.gov (United States)

Fassaert, Thijs; van Dulmen, Sandra; Schellevis, François; van der Jagt, Liesbeth; Bensing, Jozien

2008-06-30

Consultations for minor ailments constitute a large part of the workload of general practitioners (GPs). As medical interventions are not always available, specific communication strategies, such as active listening and positive communication, might help GPs to handle these problems adequately. This study examines to what extent GPs display both strategies during consultations for minor ailments and investigates how each of these relate to the patients' perceived health, consultation frequency and medication adherence. 524 videotaped consultations between Dutch GPs and patients aged 18 years or older were selected. All patients presented a minor ailment, and none of them suffered from a diagnosed chronic illness. The observation protocol included the validated Active Listening Observation Scale (ALOS-global), as well as three domains of positive communication, i.e. providing reassurance, a clear explanation, and a favourable prognosis. Patients completed several questionnaires before, immediately after, and two weeks after the consultation. These included measures for state anxiety (STAI), functional health status (COOP/WONCA charts) and medication adherence (MAQ). Consultation frequency was available from an ongoing patient registration. Data were analysed using multivariate regression analyses. Reassurance was related to patients' better overall health. Providing a favourable prognosis was linked to patients feeling better, but only when accompanied by a clear explanation of the complaints. A clear explanation was also related to patients feeling better and less anxious, except when patients reported a low mood pre-visit. Active listening alone was positively associated with patients feeling worse. Among patients in a good mood state, active listening was associated with less adherence. To some extent, it seems helpful when GPs are at the same time clear and optimistic about the nature and course of minor ailments. Yet, it does not seem helpful always and in all

Reasons for quitting cigarette smoking and electronic cigarette use for cessation help

OpenAIRE

Pokhrel, Pallav; Herzog, Thaddeus A.

2014-01-01

Despite the lack of clarity regarding their safety and efficacy as smoking cessation aids, electronic or e-cigarettes are commonly used to quit smoking. Currently little is understood about why smokers may use e-cigarettes for help with smoking cessation compared to other, proven cessation aids. This study aimed to determine the reasons for wanting to quit cigarettes that are associated with the use of e-cigarettes for cessation help versus the use of conventional Nicotine Replacement Therapy...

Fire Safety Trianing in Health Care Institutions.

Science.gov (United States)

American Hospital Association, Chicago, IL.

The manual details the procedures to be followed in developing and implementing a fire safety plan. The three main steps are first, to organize; second, to set up a procedure and put it in writing; and third, to train and drill employees and staff. Step 1 involves organizing a safety committee, appointing a fire marshall, and seeking help from…

The Nordic programme for nuclear safety 1990-1993

International Nuclear Information System (INIS)

1992-08-01

The status report for the first half of the year 1992 of the Nordic programme for nuclear safety 1990-1993 contains summaries of the progress of the projects under the four sections of the programme. These sections are divided under the main headings of dealing with readiness in abnormal radiation situations, nuclear wastes and deposition, radioecology and reactor safety. The projects included in the first part concern radiation-spreading prognoses and consequences for the area, strategies and methods for measuring and management of exchange of data between decision-makers, evaluation and harmonizing of remedial measures, public information, Nordic exercises in readiness and the determination of radioactive contamination in the area. Projects under the second section concern exemptions from regulatory control of radioactive material, experiences of demolition of uranium cleaning systems, storing of information, handling of radioactive wastes from reactor accidents, transport etc., and geological and climatological processes of significance for long-term safety in a final storage system. The third section of the programme handles training and quality assurance methods, aquatic radioecology, agricultural and natural ecosystems. The fourth section treats data on the safety status of Greifswald I-IV, Leningrad I-IV, Ignalia I-II, ship reactors, Brunsbuettel, Kruemmel and Kola I-IV. The programme's total budget is presented. (AB)

Safety culture: personal considerations of an owner/operator

International Nuclear Information System (INIS)

Fuchs, H.

1994-01-01

Safety culture with nuclear energy is above all a people's business. This means that all you can do is attempting to create the type of ideal environment that helps all plant people to perform their safety-related tasks in an optimum way. This is a continuous challenge for all who are involved. In the last years the political environment has exhibited the most noteworthy shortcomings regarding safety culture. (author) figs

International cooperation for operating safety

International Nuclear Information System (INIS)

Dupuis, M.C.

1989-03-01

The international-cooperation organization in nuclear safety domain is discussed. The nuclear energy Direction Committee is helped by the Security Committee for Nuclear Power Plants in the cooperation between security organizations of member countries and in the safety and nuclear activity regulations. The importance of the cooperation between experts in human being and engine problems is underlined. The applied methods, exchange activities and activity analysis, and the cooperation of the Nuclear Energy Agency and international organizations is analysed [fr

Safety assessment for Generation IV nuclear systems

International Nuclear Information System (INIS)

Leahy, T.J.

2012-01-01

The Generation IV International Forum (GIF) Risk and Safety Working Group (RSWG) was created to develop an effective approach for the safety of Generation IV advanced nuclear energy systems. Recent RSWG work has focused on the definition of an integrated safety assessment methodology (ISAM) for evaluating the safety of Generation IV systems. ISAM is an integrated 'tool-kit' consisting of 5 analytical techniques that are available and matched to appropriate stages of Generation IV system concept development: 1) qualitative safety features review - QSR, 2) phenomena identification and ranking table - PIRT, 3) objective provision tree - OPT, 4) deterministic and phenomenological analyses - DPA, and 5) probabilistic safety analysis - PSA. The integrated methodology is intended to yield safety-related insights that help actively drive the evolving design throughout the technology development cycle, potentially resulting in enhanced safety, reduced costs, and shortened development time

47 CFR 27.52 - RF safety.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false RF safety. 27.52 Section 27.52 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES MISCELLANEOUS WIRELESS COMMUNICATIONS SERVICES Technical Standards § 27.52 RF safety. Licensees and manufacturers are subject to the...

Relationships between road safety, safety measures and external factors : a scan of the literature in view of model development and topics for further research.

NARCIS (Netherlands)

Churchill, T. & Norden, Y. van

2010-01-01

The purpose of this literature scan is to examine where literature on the effect of external factors and road safety measures on road safety exists and where it is lacking. This scan will help us to decide which factors to include in a comprehensive road safety model as SWOV is working on, and at

10 CFR 851.23 - Safety and health standards.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and..., “Marine Terminals.” (6) Title 29 CFR, Part 1918, “Safety and Health Regulations for Longshoring.” (7...

Radiation safety audit

International Nuclear Information System (INIS)

Kadadunna, K.P.I.K.; Mod Ali, Noriah

2008-01-01

Audit has been seen as one of the effective methods to ensure harmonization in radiation protection. A radiation safety audit is a formal safety performance examination of existing or future work activities by an independent team. Regular audit will assist the management in its mission to maintain the facilities environment that is inherently safe for its employees. The audits review the adequacy of facilities for the type of use, training, and competency of workers, supervision by authorized users, availability of survey instruments, security of radioactive materials, minimization of personnel exposure to radiation, safety equipment, and the required record keeping. All approved areas of use are included in these periodic audits. Any deficiency found in the audit shall be corrected as soon as possible after they are reported. Radiation safety audit is a proactive approach to improve radiation safety practices and identify and prevent any potential radiation accident. It is an excellent tool to identify potential problem to radiation users and to assure that safety measures to eliminate or reduce the problems are fully considered. Radiation safety audit will help to develop safety culture of the facility. It is intended to be the cornerstone of a safety program designed to aid the facility, staff and management in maintaining a safe environment in which activities are carried out. The initiative of this work is to evaluate the need of having a proper audit as one of the mechanism to manage the safety using ionizing radiation. This study is focused on the need of having a proper radiation safety audit to identify deviations and deficiencies of radiation protection programmes. It will be based on studies conducted on several institutes/radiation facilities in Malaysia in 2006. Steps will then be formulated towards strengthening radiation safety through proper audit. This will result in a better working situation and confidence in the radiation protection community

14 CFR 25.303 - Factor of safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Factor of safety. 25.303 Section 25.303... STANDARDS: TRANSPORT CATEGORY AIRPLANES Structure General § 25.303 Factor of safety. Unless otherwise specified, a factor of safety of 1.5 must be applied to the prescribed limit load which are considered...

14 CFR 29.303 - Factor of safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Factor of safety. 29.303 Section 29.303... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Strength Requirements General § 29.303 Factor of safety. Unless otherwise provided, a factor of safety of 1.5 must be used. This factor applies to external and inertia...

14 CFR 27.303 - Factor of safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Factor of safety. 27.303 Section 27.303... STANDARDS: NORMAL CATEGORY ROTORCRAFT Strength Requirements General § 27.303 Factor of safety. Unless otherwise provided, a factor of safety of 1.5 must be used. This factor applies to external and inertia...

49 CFR 238.229 - Safety appliances-general.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Safety appliances-general. 238.229 Section 238.229... Equipment § 238.229 Safety appliances—general. (a) Except as provided in this part, all passenger equipment continues to be subject to the safety appliance requirements contained in Federal statute at 49 U.S.C...

The impact of safety organizing, trusted leadership, and care pathways on reported medication errors in hospital nursing units.

Science.gov (United States)

Vogus, Timothy J; Sutcliffe, Kathleen M

2011-01-01

Prior research has found that safety organizing behaviors of registered nurses (RNs) positively impact patient safety. However, little research exists on the joint benefits of safety organizing and other contextual factors that help foster safety. Although we know that organizational practices often have more powerful effects when combined with other mutually reinforcing practices, little research exists on the joint benefits of safety organizing and other contextual factors believed to foster safety. Specifically, we examined the benefits of bundling safety organizing with leadership (trust in manager) and design (use of care pathways) factors on reported medication errors. A total of 1033 RNs and 78 nurse managers in 78 emergency, internal medicine, intensive care, and surgery nursing units in 10 acute-care hospitals in Indiana, Iowa, Maryland, Michigan, and Ohio who completed questionnaires between December 2003 and June 2004. Cross-sectional analysis of medication errors reported to the hospital incident reporting system for the 6 months after the administration of the survey linked to survey data on safety organizing, trust in manager, use of care pathways, and RN characteristics and staffing. Multilevel Poisson regression analyses indicated that the benefits of safety organizing on reported medication errors were amplified when paired with high levels of trust in manager or the use of care pathways. Safety organizing plays a key role in improving patient safety on hospital nursing units especially when bundled with other organizational components of a safety supportive system.

Clinical Trial Electronic Portals for Expedited Safety Reporting: Recommendations from the Clinical Trials Transformation Initiative Investigational New Drug Safety Advancement Project.

Science.gov (United States)

Perez, Raymond P; Finnigan, Shanda; Patel, Krupa; Whitney, Shanell; Forrest, Annemarie

2016-12-15

Use of electronic clinical trial portals has increased in recent years to assist with sponsor-investigator communication, safety reporting, and clinical trial management. Electronic portals can help reduce time and costs associated with processing paperwork and add security measures; however, there is a lack of information on clinical trial investigative staff's perceived challenges and benefits of using portals. The Clinical Trials Transformation Initiative (CTTI) sought to (1) identify challenges to investigator receipt and management of investigational new drug (IND) safety reports at oncologic investigative sites and coordinating centers and (2) facilitate adoption of best practices for communicating and managing IND safety reports using electronic portals. CTTI, a public-private partnership to improve the conduct of clinical trials, distributed surveys and conducted interviews in an opinion-gathering effort to record investigator and research staff views on electronic portals in the context of the new safety reporting requirements described in the US Food and Drug Administration's final rule (Code of Federal Regulations Title 21 Section 312). The project focused on receipt, management, and review of safety reports as opposed to the reporting of adverse events. The top challenge investigators and staff identified in using individual sponsor portals was remembering several complex individual passwords to access each site. Also, certain tasks are time-consuming (eg, downloading reports) due to slow sites or difficulties associated with particular operating systems or software. To improve user experiences, respondents suggested that portals function independently of browsers and operating systems, have intuitive interfaces with easy navigation, and incorporate additional features that would allow users to filter, search, and batch safety reports. Results indicate that an ideal system for sharing expedited IND safety information is through a central portal used by

OSART Independent Safety Culture Assessment (ISCA) Guidelines

International Nuclear Information System (INIS)

2016-01-01

Safety culture is understood as an important part of nuclear safety performance. This has been demonstrated by the analysis of significant events such as Chernobyl, Davis Besse, Vandellos II, Asco, Paks, Mihamma and Forsmark, among others. In order to enhance safety culture, one essential activity is to perform assessments. IAEA Safety Standard Series No. GS-R-3, The Management System for Facilitites and Activities, states requirements for continuous improvement of safety culture, of which self, peer and independent safety culture assessments constitute an essential part. In line with this requirement, the Independent Safety Culture Assessment (ISCA) module is offered as an add-on module to the IAEA Operational Safety Review Team (OSART) programme. The OSART programme provides advice and assistance to Member States to enhance the safety of nuclear power plants during commissioning and operation. By including the ISCA module in an OSART mission, the receiving organization benefits from the synergy between the technical and the safety culture aspects of the safety review. The joint operational safety and safety culture assessment provides the organization with the opportunity to better understand the interactions between technical, human, organizational and cultural aspects, helping the organization to take a systemic approach to safety through identifying actions that fully address the root causes of any identified issue. Safety culture assessments provide insight into the fundamental drivers that shape organizational patterns of behaviour, safety consciousness and safety performance. The complex nature of safety culture means that the analysis of the results of such assessments is not as straightforward as for other types of assessment. The benefits of the results of nuclear safety culture assessments are maximized only if appropriate tools and guidance for these assessments is used; hence, this comprehensive guideline has been developed. The methodology explained

Undergraduate baccalaureate nursing students' self-reported confidence in learning about patient safety in the classroom and clinical settings: an annual cross-sectional study (2010-2013).

Science.gov (United States)

Lukewich, Julia; Edge, Dana S; Tranmer, Joan; Raymond, June; Miron, Jennifer; Ginsburg, Liane; VanDenKerkhof, Elizabeth

2015-05-01

Given the increasing incidence of adverse events and medication errors in healthcare settings, a greater emphasis is being placed on the integration of patient safety competencies into health professional education. Nurses play an important role in preventing and minimizing harm in the healthcare setting. Although patient safety concepts are generally incorporated within many undergraduate nursing programs, the level of students' confidence in learning about patient safety remains unclear. Self-reported patient safety competence has been operationalized as confidence in learning about various dimensions of patient safety. The present study explores nursing students' self-reported confidence in learning about patient safety during their undergraduate baccalaureate nursing program. Cross-sectional study with a nested cohort component conducted annually from 2010 to 2013. Participants were recruited from one Canadian university with a four-year baccalaureate of nursing science program. All students enrolled in the program were eligible to participate. The Health Professional Education in Patient Safety Survey was administered annually. The Health Professional Education in Patient Safety Survey captures how the six dimensions of the Canadian Patient Safety Institute Safety Competencies Framework and broader patient safety issues are addressed in health professional education, as well as respondents' self-reported comfort in speaking up about patient safety issues. In general, nursing students were relatively confident in what they were learning about the clinical dimensions of patient safety, but they were less confident about the sociocultural aspects of patient safety. Confidence in what they were learning in the clinical setting about working in teams, managing adverse events and responding to adverse events declined in upper years. The majority of students did not feel comfortable speaking up about patient safety issues. The nested cohort analysis confirmed these

Integrating Occupational Health and Safety into TAFE Courses: Curriculum Topics.

Science.gov (United States)

Hall, Bob; Mageean, Pauline

This guide is designed to help technical and further education (TAFE) curriculum writers in Australia integrate safety education into vocational education courses. It provides a general overview of occupational health and safety from the perspective of TAFE trade training and a brief summary of the major health and safety issues that might be…

Core management and fuel handling for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2004-01-01

This Safety Guide supplements and elaborates upon the safety requirements for core management and fuel handling that are presented in Section 5 of the Safety Requirements publication on the operation of nuclear power plants. The present publication supersedes the IAEA Safety Guide on Safety Aspects of Core Management and Fuel Handling, issued in 1985 as Safety Series No. 50-SG-010. It is also related to the Safety Guide on the Operating Organization for Nuclear Power Plants, which identifies fuel management as one of the various functions to be performed by the operating organization. The purpose of this Safety Guide is to provide recommendations for core management and fuel handling at nuclear power plants on the basis of current international good practice. The present Safety Guide addresses those aspects of fuel management activities that are necessary in order to allow optimum reactor core operation without compromising the limits imposed by the design safety considerations relating to the nuclear fuel and the plant as a whole. In this publication, 'core management' refers to those activities that are associated with fuel management in the core and reactivity control, and 'fuel handling' refers to the movement, storage and control of fresh and irradiated fuel. Fuel management comprises both core management and fuel handling. This Safety Guide deals with fuel management for all types of land based stationary thermal neutron power plants. It describes the safety objectives of core management, the tasks that have to be accomplished to meet these objectives and the activities undertaken to perform those tasks. It also deals with the receipt of fresh fuel, storage and handling of fuel and other core components, the loading and unloading of fuel and core components, and the insertion and removal of other reactor materials. In addition, it deals with loading a transport container with irradiated fuel and its preparation for transport off the site. Transport

Core management and fuel handling for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2002-01-01

This Safety Guide supplements and elaborates upon the safety requirements for core management and fuel handling that are presented in Section 5 of the Safety Requirements publication on the operation of nuclear power plants. The present publication supersedes the IAEA Safety Guide on Safety Aspects of Core Management and Fuel Handling, issued in 1985 as Safety Series No. 50-SG-010. It is also related to the Safety Guide on the Operating Organization for Nuclear Power Plants, which identifies fuel management as one of the various functions to be performed by the operating organization. The purpose of this Safety Guide is to provide recommendations for core management and fuel handling at nuclear power plants on the basis of current international good practice. The present Safety Guide addresses those aspects of fuel management activities that are necessary in order to allow optimum reactor core operation without compromising the limits imposed by the design safety considerations relating to the nuclear fuel and the plant as a whole. In this publication, 'core management' refers to those activities that are associated with fuel management in the core and reactivity control, and 'fuel handling' refers to the movement, storage and control of fresh and irradiated fuel. Fuel management comprises both core management and fuel handling. This Safety Guide deals with fuel management for all types of land based stationary thermal neutron power plants. It describes the safety objectives of core management, the tasks that have to be accomplished to meet these objectives and the activities undertaken to perform those tasks. It also deals with the receipt of fresh fuel, storage and handling of fuel and other core components, the loading and unloading of fuel and core components, and the insertion and removal of other reactor materials. In addition, it deals with loading a transport container with irradiated fuel and its preparation for transport off the site. Transport

29 CFR 1912.5 - National Advisory Committee on Occupational Safety and Health.

Science.gov (United States)

2010-07-01

... Health. 1912.5 Section 1912.5 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND... Matters § 1912.5 National Advisory Committee on Occupational Safety and Health. (a) Section 7(a) of the Act established a National Advisory Committee on Occupational Safety and Health. The Committee is to...

Safety culture in nuclear installations. Guidance for the use in enhancement of safety culture

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-12-01

This guidance has been developed for use in the IAEA Safety Culture Services, which provides support to Member States in their efforts to develop a sound safety culture of their organizations. It will be of particular use in seminars and training workshops that are part of these services. Much of the information in this publication reflects the approach the IAEA has adopted to assist nuclear organizations in Member States in improving their safety culture. This guidance covers topics such as: what is culture, and in particular what is safety culture; what are the stages of development of safety culture, and how you can assess its development using employee surveys; what practices can be used to develop safety culture, and what indicators will help monitor progress. The symptoms of a weakening safety culture are described, as well as the lessons learned from organizations who have experienced safety culture problems. This guide also contains information on how to undertake the process of transforming the existing safety culture, and develop a learning culture in an organization that is based on continuous improvement. The relationship between quality and safety is discussed. The safety culture services offered by the IAEA are also described. The IAEA perspective of safety culture has expanded with time as its understanding of the complexities of the concept developed. The concept of safety culture was first introduced by the International Nuclear Safety Advisory Group formed by the IAEA. In their report (INSAG-4, 1991) they maintained that the establishment of a safety culture within an organization is one of the fundamental management principles necessary for the safe operation of a nuclear facility. The definition recognized that safety culture is both structural and attitudinal in nature and relates to the organization and its style, as well as to attitudes, approaches and the commitment of individuals at all levels in the organization. In the framework of the

Safety culture in nuclear installations. Guidance for the use in enhancement of safety culture

International Nuclear Information System (INIS)

2002-12-01

This guidance has been developed for use in the IAEA Safety Culture Services, which provides support to Member States in their efforts to develop a sound safety culture of their organizations. It will be of particular use in seminars and training workshops that are part of these services. Much of the information in this publication reflects the approach the IAEA has adopted to assist nuclear organizations in Member States in improving their safety culture. This guidance covers topics such as: what is culture, and in particular what is safety culture; what are the stages of development of safety culture, and how you can assess its development using employee surveys; what practices can be used to develop safety culture, and what indicators will help monitor progress. The symptoms of a weakening safety culture are described, as well as the lessons learned from organizations who have experienced safety culture problems. This guide also contains information on how to undertake the process of transforming the existing safety culture, and develop a learning culture in an organization that is based on continuous improvement. The relationship between quality and safety is discussed. The safety culture services offered by the IAEA are also described. The IAEA perspective of safety culture has expanded with time as its understanding of the complexities of the concept developed. The concept of safety culture was first introduced by the International Nuclear Safety Advisory Group formed by the IAEA. In their report (INSAG-4, 1991) they maintained that the establishment of a safety culture within an organization is one of the fundamental management principles necessary for the safe operation of a nuclear facility. The definition recognized that safety culture is both structural and attitudinal in nature and relates to the organization and its style, as well as to attitudes, approaches and the commitment of individuals at all levels in the organization. In the framework of the

Characteristics of unit-level patient safety culture in hospitals in Japan: a cross-sectional study.

Science.gov (United States)

Fujita, Shigeru; Seto, Kanako; Kitazawa, Takefumi; Matsumoto, Kunichika; Hasegawa, Tomonori

2014-10-22

Patient safety culture (PSC) has an important role in determining safety and quality in healthcare. Currently, little is known about the status of unit-level PSC in hospitals in Japan. To develop appropriate strategies, characteristics of unit-level PSC should be investigated. Work units may be classified according to the characteristics of PSC, and common problems and appropriate strategies may be identified for each work unit category. This study aimed to clarify the characteristics of unit-level PSC in hospitals in Japan. In 2012, a cross-sectional study was conducted at 18 hospitals in Japan. The Hospital Survey on Patient Safety Culture questionnaire, developed by the United States Agency for Healthcare Research and Quality, was distributed to all healthcare workers (n =12,076). Percent positive scores for 12 PSC sub-dimensions were calculated for each unit, and cluster analysis was used to categorise the units according to the percent positive scores. A generalised linear mixed model (GLMM) was used to analyse the results of the cluster analysis, and odds ratios (ORs) for categorisation as high-PSC units were calculated for each unit type. A total of 9,124 respondents (75.6%) completed the questionnaire, and valid data from 8,700 respondents (72.0%) were analysed. There were 440 units in the 18 hospitals. According to the percent positive scores for the 12 sub-dimensions, the 440 units were classified into 2 clusters: high-PSC units (n =184) and low-PSC units (n =256). Percent positive scores for all PSC sub-dimensions for high-PSC units were significantly higher than those for low-PSC units. The GLMM revealed that the combined unit type of 'Obstetrics and gynaecology ward, perinatal ward or neonatal intensive care unit' was significantly more likely to be categorised as high-PSC units (OR =9.7), and 'Long-term care ward' (OR =0.2), 'Rehabilitation unit' (OR =0.2) and 'Administration unit' (OR =0.3) were significantly less likely to be categorised as high

16 CFR 1116.3 - Persons who must report under section 37.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Persons who must report under section 37. 1116.3 Section 1116.3 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY... particular model of the product is the subject of at least 3 civil actions filed in Federal or State Court...

46 CFR 129.220 - Basic safety.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Basic safety. 129.220 Section 129.220 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS ELECTRICAL INSTALLATIONS General Requirements § 129.220 Basic safety. (a) Electrical equipment and installations must be suitable...

Knowledge is power: averting safety-compromising events in the OR.

Science.gov (United States)

Catalano, Kathleen

2008-12-01

Surgical procedures can be unpredictable, and safety-compromising events can jeopardize patient safety. Perioperative nurses should be watchful for factors that can contribute to safety-compromising events, as well as the errors that can follow, and know how to avert them if possible. Knowledge is power and increased awareness of patient safety issues and the resources that are available to both health care practitioners and consumers can help perioperative nurses ward off patient safety problems before they occur.

Research and technology in the Federal Motor Carrier Safety Administration

Science.gov (United States)

2002-01-01

As the Federal Government's chief commercial vehicle safety agency, the Federal Motor Carrier Safety Administration's (FMCSA), Office of Research and Technology (R&T) focuses on saving lives and reducing injuries by helping to prevent crashes involvi...

ANALYSIS ON THE INFLUENCE OF ACCUMULATION EFFECT OF LANDSCAPE COLOR ON TRAFFIC SAFETY IN THE FOGGY SECTIONS OF EXPRESSWAYS

Directory of Open Access Journals (Sweden)

Xilei Li

2017-10-01

Full Text Available The landscape color of expressways has a significant impact on a driver's visual response, thus affecting the incidence of expressways traffic accidents. Although this problem has been analyzed and discussed from different angles, there is rare quantitative analysis on the influence of accumulation effect of landscape color on the traffic safety in foggy sections of expressways. In this paper, the color combination and stroboflash of fog lamps on both sides of the road were designed from the perspective of the color research of road landscapes, and the cumulative effect of colors and stroboflash of fog lamps on the drivers’ mind was also studied. Then the interactive cumulative model based on landscape color and driving time in heavy-fog environment was established. Finally, multi-group of fog-lamp colors and spacing experiment program allowing a visibility of 200–500m in fog environments was designed by using Tobii eye-movement instrument and the UC-win/Road simulation software. According to the program, simulations were performed on several drivers to test the influence of road-landscape colors in foggy environments on the drivers' visual psychology. The results of the simulation experiment showed that the colors and stroboflash of fog lamps on both sides of the road have a positive effect on the drivers’ safety when the visibility range is 200–500m, and the driving speed is less than 70 km/h, in addition, the red and yellow were found to have the largest influence among all the studied colors. These results show that it is necessary to design landscape colors in the foggy sections of expressways.

Steam Pressure-Reducing Station Safety and Energy Efficiency Improvement Project

Energy Technology Data Exchange (ETDEWEB)

Lower, Mark D [ORNL; Christopher, Timothy W [ORNL; Oland, C Barry [ORNL

2011-06-01

The Facilities and Operations (F&O) Directorate is sponsoring a continuous process improvement (CPI) program. Its purpose is to stimulate, promote, and sustain a culture of improvement throughout all levels of the organization. The CPI program ensures that a scientific and repeatable process exists for improving the delivery of F&O products and services in support of Oak Ridge National Laboratory (ORNL) Management Systems. Strategic objectives of the CPI program include achieving excellence in laboratory operations in the areas of safety, health, and the environment. Identifying and promoting opportunities for achieving the following critical outcomes are important business goals of the CPI program: improved safety performance; process focused on consumer needs; modern and secure campus; flexibility to respond to changing laboratory needs; bench strength for the future; and elimination of legacy issues. The Steam Pressure-Reducing Station (SPRS) Safety and Energy Efficiency Improvement Project, which is under the CPI program, focuses on maintaining and upgrading SPRSs that are part of the ORNL steam distribution network. This steam pipe network transports steam produced at the ORNL steam plant to many buildings in the main campus site. The SPRS Safety and Energy Efficiency Improvement Project promotes excellence in laboratory operations by (1) improving personnel safety, (2) decreasing fuel consumption through improved steam system energy efficiency, and (3) achieving compliance with applicable worker health and safety requirements. The SPRS Safety and Energy Efficiency Improvement Project being performed by F&O is helping ORNL improve both energy efficiency and worker safety by modifying, maintaining, and repairing SPRSs. Since work began in 2006, numerous energy-wasting steam leaks have been eliminated, heat losses from uninsulated steam pipe surfaces have been reduced, and deficient pressure retaining components have been replaced. These improvements helped ORNL

Reactor safety research - results and perspectives

International Nuclear Information System (INIS)

Banaschik, M.

1989-01-01

The work performed so far is an essential contribution to the determination of the safety margins of nuclear facilities and their systems and to the further development of safety engineering. The further development of safety engineering involves a shift of emphasis in reactor safety research towards event sequences beyond the design basis. The aim of this shift in emphasis is the further development of the preventive level. This is based on the fact that the conservative design of the operating and safety systems involves and essential safety potential. The R and D work is intended to help develop accident management measures and to take the plant back into the safe state even after severe accidents. In this context, it is necessary to make full use of the safety margins of the plant and to include the operating systems for coping with accidents. As a result of the aims, the research work approaches operating and plant-specific processes. (orig./DG) [de

Elevating standards, improving safety.

Science.gov (United States)

Clarke, Richard

2014-08-01

In our latest 'technical guidance' article, Richard Clarke, sales and marketing director at one of the UK's leading lift and escalator specialists, Schindler, examines some of the key issues surrounding the specification, maintenance, and operation of lifts in hospitals to help ensure the highest standards of safety and reliability.

33 CFR 147.801 - Boxer Platform safety zone.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Boxer Platform safety zone. 147.801 Section 147.801 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES SAFETY ZONES § 147.801 Boxer Platform safety zone. (a...

Helping Nevada School Children Become Sun Smart

Centers for Disease Control (CDC) Podcasts

2017-11-28

This podcast features Christine Thompson, Community Programs Manager at the Nevada Cancer Coalition, and author of a recent study detailing a school-based program to help Nevada school children establish healthy sun safety habits and decrease UV exposure. Christine answers questions about her research and what impact her what impact the program had on children’s skin health.  Created: 11/28/2017 by Preventing Chronic Disease (PCD), National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 11/28/2017.

Patient involvement in blood transfusion safety: patients' and healthcare professionals' perspective.

Science.gov (United States)

Davis, R; Murphy, M F; Sud, A; Noel, S; Moss, R; Asgheddi, M; Abdur-Rahman, I; Vincent, C

2012-08-01

Blood transfusion is one of the major areas where serious clinical consequences, even death, related to patient misidentification can occur. In the UK, healthcare professional compliance with pre-transfusion checking procedures which help to prevent misidentification errors is poor. Involving patients at a number of stages in the transfusion pathway could help prevent the occurrence of these incidents. To investigate patients' willingness to be involved and healthcare professionals' willingness to support patient involvement in pre-transfusion checking behaviours. A cross-sectional design was employed assessing willingness to participate in pre-transfusion checking behaviours (patient survey) and willingness to support patient involvement (healthcare professional survey) on a scale of 1-7. One hundred and ten patients who had received a transfusion aged between 18 and 93 (60 male) and 123 healthcare professionals (doctors, nurses and midwives) involved in giving blood transfusions to patients. Mean scores for patients' willingness to participate in safety-relevant transfusion behaviours and healthcare professionals' willingness to support patient involvement ranged from 4.96-6.27 to 4.53-6.66, respectively. Both groups perceived it most acceptable for patients to help prevent errors or omissions relating to their hospital identification wristband. Neither prior experience of receiving a blood transfusion nor professional role of healthcare staff had an effect on attitudes towards patient participation. Overall, both patients and healthcare professionals view patient involvement in transfusion-related behaviours quite favourably and appear in agreement regarding the behaviours patients should adopt an active role in. Further work is needed to determine the effectiveness of this approach to improve transfusion safety. © 2012 The Authors. Transfusion Medicine © 2012 British Blood Transfusion Society.

40 CFR 258.10 - Airport safety.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Airport safety. 258.10 Section 258.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES CRITERIA FOR MUNICIPAL SOLID WASTE LANDFILLS Location Restrictions § 258.10 Airport safety. (a) Owners or operators of new...

Development and application of an integrated evaluation framework for preventive safety applications

NARCIS (Netherlands)

Scholliers, J.; Joshi, S.; Gemou, M.; Hendriks, F.; Ljung Aust, M.; Luoma, J.; Netto, M.; Engstrom, J.; Leanderson Olsson, S.; Kutzner, R.; Tango, F.; Amditis, A.J.; Blosseville, J.M.; Bekiaris, E.

2011-01-01

Preventive safety functions help drivers avoid or mitigate accidents. No quantitative methods have been available to evaluate the safety impact of these systems. This paper describes a framework for the assessment of preventive and active safety functions, which integrates procedures for technical

Compilation of nuclear safety criteria potential application to DOE nonreactor facilities

International Nuclear Information System (INIS)

1992-03-01

This bibliographic document compiles nuclear safety criteria applied to the various areas of nuclear safety addressed in a Safety Analysis Report for a nonreactor nuclear facility (NNF). The criteria listed are derived from federal regulations, Nuclear Regulatory Commission (NRC) guides and publications, DOE and DOE contractor publications, and industry codes and standards. The titles of the chapters and sections of Regulatory Guide 3.26, ''Standard Format and Content of Safety Analysis Reports for Fuel Reprocessing Plants'' were used to format the chapters and sections of this compilation. In each section the criteria are compiled in four groups, namely: (1) Code of Federal Regulations, (2) USNRC Regulatory Guides, (3) Codes and Standards, and (4) Supplementary Information

Safety and Waste Management for SAM Pathogen Methods

Science.gov (United States)

The General Safety and Waste Management page offers section-specific safety and waste management details for the pathogens included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Safety and Waste Management for SAM Biotoxin Methods

Science.gov (United States)

The General Safety and Waste Management page offers section-specific safety and waste management details for the biotoxins included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

29 CFR 1925.2 - Safety and health standards.

Science.gov (United States)

2010-07-01

.... Every contractor and subcontractor shall comply with the safety and health standards published in 41 CFR... 29 Labor 7 2010-07-01 2010-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR...

32 CFR 989.27 - Occupational safety and health.

Science.gov (United States)

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Occupational safety and health. 989.27 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.27 Occupational safety and health. Assess direct and indirect impacts of proposed actions on the safety and health of Air Force employees and...

49 CFR 385.313 - Who will conduct the safety audit?

Science.gov (United States)

2010-10-01

... FITNESS PROCEDURES New Entrant Safety Assurance Program § 385.313 Who will conduct the safety audit? An individual certified under the FMCSA regulations to perform safety audits will conduct the safety audit. ... 49 Transportation 5 2010-10-01 2010-10-01 false Who will conduct the safety audit? 385.313 Section...

safety of carbon fibre reinforced plastic hollow sections in compression

African Journals Online (AJOL)

ADMINUSER

2014-01-06

Jan 6, 2014 ... Steel hollow sections were also designed using the same method. This serves as a basis of ..... used for the numerical analysis and design of circular and rectangular model sections. The software was used to analyse failure ...

Patient Safety Culture Status From The Perspective Medical Staff Of Yasuj Hospitals In 2015

Directory of Open Access Journals (Sweden)

M Rezaean

2016-01-01

atmosphere. By the same token, increasing the number of workers in administrative sections, a large amount of work, decreasing work time and creating a reporting system may help improve the safety and patient safety culture. .

The relationship between organizational leadership for safety and learning from patient safety events.

Science.gov (United States)

Ginsburg, Liane R; Chuang, You-Ta; Berta, Whitney Blair; Norton, Peter G; Ng, Peggy; Tregunno, Deborah; Richardson, Julia

2010-06-01

To examine the relationship between organizational leadership for patient safety and five types of learning from patient safety events (PSEs). Forty-nine general acute care hospitals in Ontario, Canada. A nonexperimental design using cross-sectional surveys of hospital patient safety officers (PSOs) and patient care managers (PCMs). PSOs provided data on organization-level learning from (a) minor events, (b) moderate events, (c) major near misses, (d) major event analysis, and (e) major event dissemination/communication. PCMs provided data on organizational leadership (formal and informal) for patient safety. Hospitals were the unit of analysis. Seemingly unrelated regression was used to examine the influence of formal and informal leadership for safety on the five types of learning from PSEs. The interaction between leadership and hospital size was also examined. Formal organizational leadership for patient safety is an important predictor of learning from minor, moderate, and major near-miss events, and major event dissemination. This relationship is significantly stronger for small hospitals (learning from safety events. Formal leadership support for safety is of particular importance in small organizations where the economic burden of safety programs is disproportionately large and formal leadership is closer to the front lines.

Probabilistic safety analysis procedures guide, Sections 8-12. Volume 2, Rev. 1

International Nuclear Information System (INIS)

McCann, M.; Reed, J.; Ruger, C.; Shiu, K.; Teichmann, T.; Unione, A.; Youngblood, R.

1985-08-01

A procedures guide for the performance of probabilistic safety assessment has been prepared for interim use in the Nuclear Regulatory Commission programs. It will be revised as comments are received, and as experience is gained from its use. The probabilistic safety assessment studies performed are intended to produce probabilistic predictive models that can be used and extended by the utilities and by NRC to sharpen the focus of inquiries into a range of issues affecting reactor safety. The first volume of the guide describes the determination of the probability (per year) of core damage resulting from accident initiators internal to the plant (i.e., intrinsic to plant operation) and from loss of off-site electric power. The scope includes human reliability analysis, a determination of the importance of various core damage accident sequences, and an explicit treatment and display of uncertainties for key accident sequences. This second volume deals with the treatment of the so-called external events including seismic disturbances, fires, floods, etc. Ultimately, the guide will be augmented to include the plant-specific analysis of in-plant processes (i.e., containment performance). This guide provides the structure of a probabilistic safety study to be performed, and indicates what products of the study are valuable for regulatory decision making. For internal events, methodology is treated in the guide only to the extent necessary to indicate the range of methods which is acceptable; ample reference is given to alternative methodologies which may be utilized in the performance of the study. For external events, more explicit guidance is given

Safety and Waste Management for SAM Chemistry Methods

Science.gov (United States)

The General Safety and Waste Management page offers section-specific safety and waste management details for the chemical analytes included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Safety and Waste Management for SAM Radiochemical Methods

Science.gov (United States)

The General Safety and Waste Management page offers section-specific safety and waste management details for the radiochemical analytes included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Architecture Level Safety Analyses for Safety-Critical Systems

Directory of Open Access Journals (Sweden)

K. S. Kushal

2017-01-01

Full Text Available The dependency of complex embedded Safety-Critical Systems across Avionics and Aerospace domains on their underlying software and hardware components has gradually increased with progression in time. Such application domain systems are developed based on a complex integrated architecture, which is modular in nature. Engineering practices assured with system safety standards to manage the failure, faulty, and unsafe operational conditions are very much necessary. System safety analyses involve the analysis of complex software architecture of the system, a major aspect in leading to fatal consequences in the behaviour of Safety-Critical Systems, and provide high reliability and dependability factors during their development. In this paper, we propose an architecture fault modeling and the safety analyses approach that will aid in identifying and eliminating the design flaws. The formal foundations of SAE Architecture Analysis & Design Language (AADL augmented with the Error Model Annex (EMV are discussed. The fault propagation, failure behaviour, and the composite behaviour of the design flaws/failures are considered for architecture safety analysis. The illustration of the proposed approach is validated by implementing the Speed Control Unit of Power-Boat Autopilot (PBA system. The Error Model Annex (EMV is guided with the pattern of consideration and inclusion of probable failure scenarios and propagation of fault conditions in the Speed Control Unit of Power-Boat Autopilot (PBA. This helps in validating the system architecture with the detection of the error event in the model and its impact in the operational environment. This also provides an insight of the certification impact that these exceptional conditions pose at various criticality levels and design assurance levels and its implications in verifying and validating the designs.

Plant air systems safety study: Portsmouth Gaseous Diffusion Plant

International Nuclear Information System (INIS)

1982-05-01

The Portsmouth Gaseous Diffusion Plant Air System facilities and operations are reviewed for potential safety problems not covered by standard industrial safety procedures. Information is presented under the following section headings: facility and process description (general); air plant equipment; air distribution system; safety systems; accident analysis; plant air system safety overview; and conclusion

Technical Support Section Instrument Support Program for nuclear and nonnuclear facilities with safety requirements

International Nuclear Information System (INIS)

Adkisson, B.P.; Allison, K.L.

1995-01-01

This document describes requirements, procedures, and supervisory responsibilities of the Oak Ridge National Laboratory (ORNL) Instrumentation and Controls (I ampersand C) Division's Technical Support Section (TSS) for instrument surveillance and maintenance in nonreactor nuclear facilities having identified Operational Safety Requirements (OSRs) or Limiting Conditions Document (LCDs). Implementation of requirements comply with the requirements of U.S. Department of Energy (DOE) Orders 5480.5, 5480.22, and 5481.1B; Martin Marietta Energy Systems, Inc. (Energy Systems), Policy Procedure ESS-FS-201; and ORNL SPP X-ESH-15. OSRs and LCDs constitute an agreement or contract between DOE and the facility operating management regarding the safe operation of the facility. One basic difference between OSRs and LCDs is that violation of an OSR is considered a Category II occurrence, whereas violation of an LCD requirement is considered a Category III occurrence (see Energy Systems Standard ESS-OP-301 and ORNL SPP X-GP-13). OSRs are required for high- and moderate-hazard nuclear facilities, whereas the less-rigorous LCDs are required for low-hazard nuclear facilities and selected open-quotes generally acceptedclose quotes operations. Hazard classifications are determined through a hazard screening process, which each division conducts for its facilities

[Relationship between job satisfaction and patient safety culture].

Science.gov (United States)

Merino-Plaza, María José; Carrera-Hueso, Francisco Javier; Roca-Castelló, María Rosa; Morro-Martín, María Dolores; Martínez-Asensi, Amparo; Fikri-Benbrahim, Narjis

2017-05-19

To evaluate the relationship between safety culture and job satisfaction in a medium-stay hospital, showing the relationships between the dimensions that define both constructs and identifying the dimensions with the greatest impact on both variables. Cross-sectional study conducted in 2015, using the Basque Health Service Job Satisfaction Survey and the Spanish version of the «Hospital Survey on Patient Safety» questionnaire (Agency for Healthcare Research and Quality). Result Variables: high job satisfaction and high degree of perceived security (score ≥75th percentile). Predictor variables: socio-demographic characteristics and perception of the evaluated dimensions. The association between variables was quantified by adjusted odds ratio (OR) and the 95% confidence interval. The mean job satisfaction was 7.21 (standard deviation [SD]: 2.01) and the mean of perceived safety was 7.48 (SD=1.98). The 75th percentile of the distribution in both cases was 9. The socio-demographic variables had little significance, while a positive perception of many of the considered dimensions, was associated with high perception of the result variables. In the data analysis were obtained multiple significant correlations and cross-relations between the dimensions that define both constructs, as well as between the degree of satisfaction of the dimensions considered and the outcome variables. The results obtained evidenced the relationship between job satisfaction and safety culture and quantify the association degree between the studied variables. The adjusted OR identifies the variables most strongly associated with the effect and helps to select improvement areas. Copyright © 2017 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

Laser Safety Inspection Criteria

International Nuclear Information System (INIS)

Barat, K

2005-01-01

A responsibility of the Laser Safety Officer (LSO) is to perform laser safety audits. The American National Standard Z136.1 Safe use of Lasers references this requirement in several sections: (1) Section 1.3.2 LSO Specific Responsibilities states under Hazard Evaluation, ''The LSO shall be responsible for hazards evaluation of laser work areas''; (2) Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''; and (3) Appendix D, under Survey and Inspections, it states, ''the LSO will survey by inspection, as considered necessary, all areas where laser equipment is used''. Therefore, for facilities using Class 3B and or Class 4 lasers, audits for laser safety compliance are expected to be conducted. The composition, frequency and rigueur of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms. In many institutions, a sole Laser Safety Officer (LSO) or a number of Deputy LSO's perform these audits. For that matter, there are institutions that request users to perform a self-assessment audit. Many items on the common audit list and the associated findings are subjective because they are based on the experience and interest of the LSO or auditor in particular items on the checklist. Beam block usage is an example; to one set of eyes a particular arrangement might be completely adequate, while to another the installation may be inadequate. In order to provide more consistency, the National Ignition Facility Directorate at Lawrence Livermore National Laboratory (NIF-LLNL) has established criteria for a number of items found on the typical laser safety audit form. These criteria are distributed to laser users, and they serve two broad purposes: first, it gives the user an expectation of what will be reviewed by an auditor, and second, it is an

46 CFR 176.910 - Passenger Ship Safety Certificate.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Passenger Ship Safety Certificate. 176.910 Section 176... 100 GROSS TONS) INSPECTION AND CERTIFICATION International Convention for Safety of Life at Sea, 1974, as Amended (SOLAS) § 176.910 Passenger Ship Safety Certificate. (a) A vessel, which carries more than...

Cultural Humility and Hospital Safety Culture.

Science.gov (United States)

Hook, Joshua N; Boan, David; Davis, Don E; Aten, Jamie D; Ruiz, John M; Maryon, Thomas

2016-12-01

Hospital safety culture is an integral part of providing high quality care for patients, as well as promoting a safe and healthy environment for healthcare workers. In this article, we explore the extent to which cultural humility, which involves openness to cultural diverse individuals and groups, is related to hospital safety culture. A sample of 2011 hospital employees from four hospitals completed measures of organizational cultural humility and hospital safety culture. Higher perceptions of organizational cultural humility were associated with higher levels of general perceptions of hospital safety, as well as more positive ratings on non-punitive response to error (i.e., mistakes of staff are not held against them), handoffs and transitions, and organizational learning. The cultural humility of one's organization may be an important factor to help improve hospital safety culture. We conclude by discussing potential directions for future research.

The role of cross-sectional geometry, curvature, and limb posture in maintaining equal safety factors: a computed tomography study.

Science.gov (United States)

Brassey, Charlotte A; Kitchener, Andrew C; Withers, Philip J; Manning, Phillip L; Sellers, William I

2013-03-01

The limb bones of an elephant are considered to experience similar peak locomotory stresses as a shrew. "Safety factors" are maintained across the entire range of body masses through a combination of robusticity of long bones, postural variation, and modification of gait. The relative contributions of these variables remain uncertain. To test the role of shape change, we undertook X-ray tomographic scans of the leg bones of 60 species of mammals and birds, and extracted geometric properties. The maximum resistible forces the bones could withstand before yield under compressive, bending, and torsional loads were calculated using standard engineering equations incorporating curvature. Positive allometric scaling of cross-sectional properties with body mass was insufficient to prevent negative allometry of bending (F(b) ) and torsional maximum force (F(t) ) (and hence decreasing safety factors) in mammalian (femur F(b) ∞M(b) (0.76) , F(t) ∞M(b) (0.80) ; tibia F(b) ∞M(b) (0.80) , F(t) ∞M(b) (0.76) ) and avian hindlimbs (tibiotarsus F(b) ∞M(b) (0.88) , F(t) ∞M(b) (0.89) ) with the exception of avian femoral F(b) and F(t) . The minimum angle from horizontal a bone must be held while maintaining a given safety factor under combined compressive and bending loads increases with M(b) , with the exception of the avian femur. Postural erectness is shown as an effective means of achieving stress similarity in mammals. The scaling behavior of the avian femur is discussed in light of unusual posture and kinematics. Copyright © 2013 Wiley Periodicals, Inc.

Safety parameter display system: an operator support system for enhancement of safety in Indian PHWRs

International Nuclear Information System (INIS)

Subramaniam, K.; Biswas, T.

1994-01-01

Ensuring operational safety in nuclear power plants is important as operator errors are observed to contribute significantly to the occurrence of accidents. Computerized operator support systems, which process and structure information, can help operators during both normal and transient conditions, and thereby enhance safety and aid effective response to emergency conditions. An important operator aid being developed and described in this paper, is the safety parameter display system (SPDS). The SPDS is an event-independent, symptom-based operator aid for safety monitoring. Knowledge-based systems can provide operators with an improved quality of information. An information processing model of a knowledge based operator support system (KBOSS) developed for emergency conditions using an expert system shell is also presented. The paper concludes with a discussion of the design issues involved in the use of a knowledge based systems for real time safety monitoring and fault diagnosis. (author). 8 refs., 4 figs., 1 tab

Criticality safety evaluations - a open-quotes stalking horseclose quotes for integrated safety assessment

International Nuclear Information System (INIS)

Williams, R.A.

1995-01-01

The Columbia Fuel Fabrication Facility of the Westinghouse Commercial Nuclear Fuel Division manufactures low-enriched uranium fuel and associated components for use in commercial pressurized water power reactors. To support development of a comprehensive integrated safety assessment (ISA) for the facility, as well as to address increasing U.S. Nuclear Regulatory Commission (NRC) expectations regarding such a facility's criticality safety assessments, a project is under way to complete criticality safety evaluations (CSEs) of all plant systems used in processing nuclear materials. Each CSE is made up of seven sections, prepared by a multidisciplinary team of process engineers, systems engineers, safety engineers, maintenance representatives, and operators. This paper provides a cursory outline of the type of information presented in a CSE

Safety assessment for TA-48 radiochemical operations

International Nuclear Information System (INIS)

1994-08-01

The purpose of this report is to document an assessment performed to evaluate the safety of the radiochemical operations conducted at the Los Alamos National Laboratory operations area designated as TA-48. This Safety Assessment for the TA-48 radiochemical operations was prepared to fulfill the requirements of US Department of Energy (DOE) Order 5481.1B, ''Safety Analysis and Review System.'' The area designated as TA-48 is operated by the Chemical Science and Technology (CST) Division and is involved with radiochemical operations associated with nuclear weapons testing, evaluation of samples collected from a variety of environmental sources, and nuclear medicine activities. This report documents a systematic evaluation of the hazards associated with the radiochemical operations that are conducted at TA-48. The accident analyses are limited to evaluation of the expected consequences associated with a few bounding accident scenarios that are selected as part of the hazard analysis. Section 2 of this report presents an executive summary and conclusions, Section 3 presents pertinent information concerning the TA-48 site and surrounding area, Section 4 presents a description of the TA-48 radiochemical operations, and Section 5 presents a description of the individual facilities. Section 6 of the report presents an evaluation of the hazards that are associated with the TA-48 operations and Section 7 presents a detailed analysis of selected accident scenarios

Specification Section 01065S ES&H for Service Contracts

Energy Technology Data Exchange (ETDEWEB)

Kirsch, Greg C. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

2014-07-01

Section Includes: Requirements and guidelines in performance of work concerning protection of environment and property, and the safety and health of Contractors, Sandia National Laboratories (SNL) and Department of Energy (DOE) employees, visitors to SNL, and members of the public. This Section is applicable only to Service Contracts that do not involve construction or construction-like activities. Construction and construction-like activities are covered by Section 01065, Environment, Safety and Health (ES&H) for Construction Contracts. The entire ES&H program shall focus on safe-by-design intent, understanding the technical basis for the work, identifying and controlling energy sources, unacceptable consequences, risk assessments, and positive verification.

14 CFR 417.103 - Safety organization.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Safety organization. 417.103 Section 417... organization. (a) A launch operator must maintain and document a safety organization. A launch operator must... within the launch operator's organization and between the launch operator and any federal launch range or...

MedWatch, the FDA Safety Information and Adverse Event Reporting Program

Science.gov (United States)

... Reporting Program MedWatch: The FDA Safety Information and Adverse Event Reporting Program Share Tweet Linkedin Pin it ... approved information that can help patients avoid serious adverse events. Potential Signals of Serious Risks/New Safety ...

16 CFR 1115.8 - Compliance with product safety standards.

Science.gov (United States)

2010-01-01

... applicable mandatory consumer product safety standards and to report to the Commission any products which do.... 1115.8 Section 1115.8 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SUBSTANTIAL PRODUCT HAZARD REPORTS General Interpretation § 1115.8 Compliance with...

47 CFR 80.1109 - Distress, urgency, and safety communications.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Distress, urgency, and safety communications. 80.1109 Section 80.1109 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Global Maritime Distress and Safety System (GMDSS...

Management of safety culture

International Nuclear Information System (INIS)

Kavsek, D.

2004-01-01

The strengthening of safety culture in an organization has become an increasingly important issue for nuclear industry. A high level of safety performance is essential for business success in intensely competitive global environment. This presentation offers a discussion of some principles and activities used in enhancing safety performance and appropriate safety behaviour at the Krsko NPP. Over the years a number of events have occurred in nuclear industry that have involved problems in human performance. A review of these and other significant events has identified recurring weaknesses in plant safety culture and policy. Focusing attention on the strengthening of relevant processes can help plants avoid similar undesirable events. The policy of the Krsko NPP is that all employees concerned shall constantly be alert to opportunities to reduce risks to the lowest practicable level and to achieve excellence in plant safety. The most important objective is to protect individuals, society and the environment by establishing and maintaining an effective defense against radiological hazard in the nuclear power plant. It is achieved through the use of reliable structures, components, systems, and procedures, as well as plant personnel committed to a strong safety culture. The elements of safety culture include both organizational and individual aspects. Elements commonly included at the organizational level are senior management commitment to safety, organizational effectiveness, effective communication, organizational learning, and a culture that encourages identification and resolution of safety issues. Elements identified at the individual level include personal accountability, a questioning attitude, communication, procedural adherence, etc.(author)

Planning for Campus Safety

Science.gov (United States)

Dessoff, Alan

2009-01-01

From natural disasters to criminal violence, facilities officers are often called on to address campus safety and security issues beyond their usual responsibilities. Their experiences in coping with unanticipated events have produced a catalogue of lessons learned that can help them and their peers at other institutions who might face the same…

Unresolved safety issues: where do we go from here

International Nuclear Information System (INIS)

Aycock, M.B.

1980-01-01

Section 210 of the Energy reorganization Act of 1974, as amended requires the NRC to develop a program for resolving Unresolved Safety Issues related to nuclear power plants. Seventeen Unresolved Safety Issues were identified by the NRC in 1978 and by early 1979 the NRC Unresolved Safety Issues Program was quickly becoming a well defined and manageable effort. Although, the Three Mile Island accident caused the momentum developed in early 1979 to be lost, efforts on ongoing generic tasks were continued by a special NRC Task Force established in June 1979. The momentum that was lost must be regained, however, if the Congressional mandate in Section 210 is to be met. With increased industry involvement and the marriage of the Unresolved Safety Issues Program with the improved and broader safety program development, audit and evaluation activities of the new NRR Division of Safety Technology, this should be possible

Microbiological safety cabinets, cytotoxic safety cabinets. Choice and use

International Nuclear Information System (INIS)

Balty, I.; Belhanini, B.; Clermont, H.; Cornu, J.C.; Jacquet, M.A.; Texte, J.C.

2003-01-01

Drawn up by a working group composed of prevention professionals, manufacturers and control bodies, this guide is intended to help those responsible for safety in laboratories choose and acquire materials responding to the intended protection objectives. It provides recommendations for the commissioning and control of these materials as well as for their use. After a description of the operational characteristics of safety cabinets, this guide looks at the important points to be taken into account when ordering, accepting and commissioning equipment adapted to precise needs. It also covers verification of correct operation and provides a number of common sense rules relative to precautions for use. Material cleaning and decontamination is described briefly on account of the very specialized character of this activity. Detailed information relative to this subject should be sought in the literature. (authors)

Safety class methodology

International Nuclear Information System (INIS)

Donner, E.B.; Low, J.M.; Lux, C.R.

1992-01-01

DOE Order 6430.1A, General Design Criteria (GDC), requires that DOE facilities be evaluated with respect to ''safety class items.'' Although the GDC defines safety class items, it does not provide a methodology for selecting safety class items. The methodology described in this paper was developed to assure that Safety Class Items at the Savannah River Site (SRS) are selected in a consistent and technically defensible manner. Safety class items are those in the highest of four categories determined to be of special importance to nuclear safety and, merit appropriately higher-quality design, fabrication, and industrial test standards and codes. The identification of safety class items is approached using a cascading strategy that begins at the 'safety function' level (i.e., a cooling function, ventilation function, etc.) and proceeds down to the system, component, or structure level. Thus, the items that are required to support a safety function are SCls. The basic steps in this procedure apply to the determination of SCls for both new project activities, and for operating facilities. The GDC lists six characteristics of SCls to be considered as a starting point for safety item classification. They are as follows: 1. Those items whose failure would produce exposure consequences that would exceed the guidelines in Section 1300-1.4, ''Guidance on Limiting Exposure of the Public,'' at the site boundary or nearest point of public access 2. Those items required to maintain operating parameters within the safety limits specified in the Operational Safety Requirements during normal operations and anticipated operational occurrences. 3. Those items required for nuclear criticality safety. 4. Those items required to monitor the release of radioactive material to the environment during and after a Design Basis Accident. Those items required to achieve, and maintain the facility in a safe shutdown condition 6. Those items that control Safety Class Item listed above

46 CFR 61.40-6 - Periodic safety tests.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Periodic safety tests. 61.40-6 Section 61.40-6 Shipping... INSPECTIONS Design Verification and Periodic Testing of Vital System Automation § 61.40-6 Periodic safety tests. (a) Periodic Safety tests must demonstrate the proper operation of the primary and alternate...

30 CFR 250.511 - Traveling-block safety device.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Traveling-block safety device. 250.511 Section... Traveling-block safety device. All units being used for well-completion operations that have both a traveling block and a crown block must be equipped with a safety device that is designed to prevent the...

Safety measures for integrity test apparatus for IS process. Sulfuric acid decomposition section

International Nuclear Information System (INIS)

Noguchi, Hiroki; Kubo, Shinji; Iwatsuki, Jin; Onuki, Kaoru

2013-07-01

Hazardous substances such as sulfuric acid, sulfur dioxide and hydrogen iodide acid are employed in thermochemical Iodine-Sulfur (IS) process. It is necessary to take safety measure against workers and external environments to study experimentally on IS process. Presently we have been conducting to verify the soundness of main components made of engineering material in actual corrosive condition. An integrity test apparatus for the components of sulfuric acid decomposition was set up. We will use the hazardous substances such as sulfuric acid and sulfur dioxide and perform the experiment in pressurized condition in this integrity test. Safety measures for the test apparatus, operation and abnormal situation were considered prior to starting the test. This report summarized the consideration results for the safety measures on the integrity test apparatus for the components of sulfuric acid decomposition. (author)

JSD1000: multi-group cross section sets for shielding materials

International Nuclear Information System (INIS)

Yamano, Naoki

1984-03-01

A multi-group cross section library for shielding safety analysis has been produced by using ENDF/B-IV. The library consists of ultra-fine group cross sections, fine-group cross sections, secondary gamma-ray production cross sections and effective macroscopic cross sections for typical shielding materials. Temperature dependent data at 300, 560 and 900 K have been also provided. Angular distributions of the group to group transfer cross section are defined by a new method of ''Direct Angular Representation'' (DAR) instead of the method of finite Legendre expansion. The library designated JSD1000 are stored in a direct access data base named DATA-POOL and data manipulations are available by using the DATA-POOL access package. The 3824 neutron group data of the ultra-fine group cross sections and the 100 neutron, 20 photon group cross sections are applicable to shielding safety analyses of nuclear facilities. This report provides detailed specifications and the access method for the JSD1000 library. (author)

A Tool for Assessment of Animal Health Laboratory Safety and Biosecurity: The Safety Module of the Food and Agriculture Organization’s Laboratory Mapping Tool

Directory of Open Access Journals (Sweden)

Beatrice Mouillé

2018-03-01

Full Text Available The Laboratory Management Tool (LMT is a standardized spreadsheet-based assessment tool developed to help support national, regional, and global efforts to maintain an effective network of animal health and veterinary public health laboratories. The safety and biosecurity module of the LMT (LMT-S includes 98 measures covering administrative, operational, engineering, and personal protective equipment practices used to provide laboratory safety and biosecurity. Performance aspects of laboratory infrastructure and technical compliance considered fundamental for ensuring that a laboratory is able to appropriately function in a safe and biosecure manner are systematically queried and scored for compliance on a four-point scale providing for a semi-quantitative assessment. Data collected is used to generate graphs and tables mapping levels of compliance with international standards and good practices, as well as for documenting progress over time. The LMT-S was employed by trained auditors in 34 laboratories located in 19 countries between 2015 and 2017. The tool is intended to help standardize animal health laboratory assessments, document compliance with recognized laboratory safety and biosecurity measures, serve as a self-help and training tool, and assist global laboratory development efforts by providing an accurate measurement of laboratory safety and biosecurity at local, national, and regional levels.

Learning from error: leading a culture of safety.

Science.gov (United States)

Gibson, Russell; Armstrong, Alexander; Till, Alex; McKimm, Judy

2017-07-02

A recent shift towards more collective leadership in the NHS can help to achieve a culture of safety, particularly through encouraging frontline staff to participate and take responsibility for improving safety through learning from error and near misses. Leaders must ensure that they provide psychological safety, organizational fairness and learning systems for staff to feel confident in raising concerns, that they have the autonomy and skills to lead continual improvement, and that they have responsibility for spreading this learning within and across organizations.

14 CFR 33.75 - Safety analysis.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Safety analysis. 33.75 Section 33.75... STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.75 Safety analysis. (a... consequences of all failures that can reasonably be expected to occur. This analysis will take into account, if...

14 CFR 35.15 - Safety analysis.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Safety analysis. 35.15 Section 35.15... STANDARDS: PROPELLERS Design and Construction § 35.15 Safety analysis. (a)(1) The applicant must analyze the.... This analysis will take into account, if applicable: (i) The propeller system in a typical installation...

49 CFR 238.429 - Safety appliances.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Safety appliances. 238.429 Section 238.429... Equipment § 238.429 Safety appliances. (a) Couplers. (1) The leading and the trailing ends of a semi... appliance mechanical strength and fasteners. (1) All handrails, handholds, and sill steps shall be made of 1...

What stage are low-income and middle-income countries (LMICs) at with patient safety curriculum implementation and what are the barriers to implementation? A two-stage cross-sectional study

Science.gov (United States)

Ginsburg, Liane R; Dhingra-Kumar, Neelam; Donaldson, Liam J

2017-01-01

Objectives The improvement of safety in healthcare worldwide depends in part on the knowledge, skills and attitudes of staff providing care. Greater patient safety content in health professional education and training programmes has been advocated internationally. While WHO Patient Safety Curriculum Guides (for Medical Schools and Multi-Professional Curricula) have been widely disseminated in low-income and middle-income countries (LMICs) over the last several years, little is known about patient safety curriculum implementation beyond high-income countries. The present study examines patient safety curriculum implementation in LMICs. Methods Two cross-sectional surveys were carried out. First, 88 technical officers in Ministries of Health and WHO country offices were surveyed to identify the pattern of patient safety curricula at country level. A second survey followed that gathered information from 71 people in a position to provide institution-level perspectives on patient safety curriculum implementation. Results The majority, 69% (30/44), of the countries were either considering whether to implement a patient safety curriculum or actively planning, rather than actually implementing, or embedding one. Most organisations recognised the need for patient safety education and training and felt a safety curriculum was compatible with the values of their organisation; however, important faculty-level barriers to patient safety curriculum implementation were identified. Key structural markers, such as dedicated financial resources and relevant assessment tools to evaluate trainees’ patient safety knowledge and skills, were in place in fewer than half of organisations studied. Conclusions Greater attention to patient safety curriculum implementation is needed. The barriers to patient safety curriculum implementation we identified in LMICs are not unique to these regions. We propose a framework to act as a global standard for patient safety curriculum implementation

Investigation on regulatory requirements for radiation safety management

International Nuclear Information System (INIS)

Han, Eun Ok; Choi, Yoon Seok; Cho, Dae Hyung

2013-01-01

NRC recognizes that efficient management of radiation safety plan is an important factor to achieve radiation safety service. In case of Korea, the contents to perform the actual radiation safety management are legally contained in radiation safety management reports based on the Nuclear Safety Act. It is to prioritize the importance of safety regulations in each sector in accordance with the current situation of radiation and radioactive isotopes-used industry and to provide a basis for deriving safety requirements and safety regulations system maintenance by the priority of radiation safety management regulations. It would be helpful to achieve regulations to conform to reality based on international standards if consistent safety requirements is developed for domestic users, national standards and international standards on the basis of the results of questions answered by radiation safety managers, who lead on-site radiation safety management, about the priority of important factors in radioactive sources use, sales, production, moving user companies, to check whether derived configuration requirements for radiation safety management are suitable for domestic status

Fusion Safety Program. Annual report, FY 1982

International Nuclear Information System (INIS)

Crocker, J.G.; Cohen, S.

1983-07-01

The Fusion Safety Program major activities for Fiscal Year 1982 are summarized in this report. The program was started in FY-79, with the Idaho National Engineering Laboratory (INEL) designated as lead laboratory and EG and G Idaho, Inc., named as prime contractor to implement this role. The report contains four sections: EG and G Idaho, Inc., Activities at INEL includes major portions of papers dealing with ongoing work in tritium implantation experiments, tritium risk assessment, transient code development, heat transfer and fluid flow analysis, and high temperature oxidation and mobilization of structural material experiments. The section Outside Contracts includes studies of superconducting magnet safety conducted by Argonne National Laboratory, experiments concerning superconductor safety issues performed by the Francis Bitter Magnet Laboratory of the Massachusetts Institute of Technology (MIT) to verify analytical work, a continuation of safety and environmental studies by MIT, a summary of lithium safety experiments at Hanford Engineering Development Laboratory, and the results of tritium gas conversion to oxide experiments at Oak Ridge National Laboratory. A List of Publications and Proposed FY-83 Activities are also presented

48 CFR 923.7002 - Worker safety and health.

Science.gov (United States)

2010-10-01

... Information and Protection of Worker Safety and Health” or “952.223-77, Conditional Payment of Fee or Profit—Protection of Worker Safety and Health” implement the requirements of section 234C of the Atomic Energy Act... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Worker safety and health...

21 CFR 312.88 - Safeguards for patient safety.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Safeguards for patient safety. 312.88 Section 312... Severely-debilitating Illnesses § 312.88 Safeguards for patient safety. All of the safeguards incorporated within parts 50, 56, 312, 314, and 600 of this chapter designed to ensure the safety of clinical testing...

30 CFR 250.611 - Traveling-block safety device.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Traveling-block safety device. 250.611 Section... Traveling-block safety device. After May 31, 1989, all units being used for well-workover operations which have both a traveling block and a crown block shall be equipped with a safety device which is designed...

A hybrid approach to quantify software reliability in nuclear safety systems

International Nuclear Information System (INIS)

Arun Babu, P.; Senthil Kumar, C.; Murali, N.

2012-01-01

Highlights: ► A novel method to quantify software reliability using software verification and mutation testing in nuclear safety systems. ► Contributing factors that influence software reliability estimate. ► Approach to help regulators verify the reliability of safety critical software system during software licensing process. -- Abstract: Technological advancements have led to the use of computer based systems in safety critical applications. As computer based systems are being introduced in nuclear power plants, effective and efficient methods are needed to ensure dependability and compliance to high reliability requirements of systems important to safety. Even after several years of research, quantification of software reliability remains controversial and unresolved issue. Also, existing approaches have assumptions and limitations, which are not acceptable for safety applications. This paper proposes a theoretical approach combining software verification and mutation testing to quantify the software reliability in nuclear safety systems. The theoretical results obtained suggest that the software reliability depends on three factors: the test adequacy, the amount of software verification carried out and the reusability of verified code in the software. The proposed approach may help regulators in licensing computer based safety systems in nuclear reactors.

LNG Safety Assessment Evaluation Methods

Energy Technology Data Exchange (ETDEWEB)

Muna, Alice Baca [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); LaFleur, Angela Christine [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-05-01

Sandia National Laboratories evaluated published safety assessment methods across a variety of industries including Liquefied Natural Gas (LNG), hydrogen, land and marine transportation, as well as the US Department of Defense (DOD). All the methods were evaluated for their potential applicability for use in the LNG railroad application. After reviewing the documents included in this report, as well as others not included because of repetition, the Department of Energy (DOE) Hydrogen Safety Plan Checklist is most suitable to be adapted to the LNG railroad application. This report was developed to survey industries related to rail transportation for methodologies and tools that can be used by the FRA to review and evaluate safety assessments submitted by the railroad industry as a part of their implementation plans for liquefied or compressed natural gas storage ( on-board or tender) and engine fueling delivery systems. The main sections of this report provide an overview of various methods found during this survey. In most cases, the reference document is quoted directly. The final section provides discussion and a recommendation for the most appropriate methodology that will allow efficient and consistent evaluations to be made. The DOE Hydrogen Safety Plan Checklist was then revised to adapt it as a methodology for the Federal Railroad Administration’s use in evaluating safety plans submitted by the railroad industry.

Indicators of safety culture - selection and utilization of leading safety performance indicators

Energy Technology Data Exchange (ETDEWEB)

Reiman, Teemu; Pietikaeinen, Elina (VTT, Technical Research Centre of Finland (Finland))

2010-03-15

performance indicators can help in reflecting on this model. Key questions to ask when selecting and utilizing safety performance indicators are 1) what is required from the nuclear power plant to perform safely and 2) what is required from the organization in order to be aware of its safety level and enhance its safety performance. The indicators should provide information on whether these requirements are met or not, where the organization should put more effort to meet the requirements and finally, does the organization have an accurate view on the requirements

Indicators of safety culture - selection and utilization of leading safety performance indicators

International Nuclear Information System (INIS)

Reiman, Teemu; Pietikaeinen, Elina

2010-03-01

performance indicators can help in reflecting on this model. Key questions to ask when selecting and utilizing safety performance indicators are 1) what is required from the nuclear power plant to perform safely and 2) what is required from the organization in order to be aware of its safety level and enhance its safety performance. The indicators should provide information on whether these requirements are met or not, where the organization should put more effort to meet the requirements and finally, does the organization have an accurate view on the requirements

Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management. Fourth National Report on Compliance with the Joint Convention Obligations. France

International Nuclear Information System (INIS)

2011-09-01

The Joint Convention on the Safety of Spent Fuel Management and the Safety of Radioactive Waste Management, hereinafter referred to as the 'Joint Convention', is the result of international discussions that followed the adoption of the Convention on Nuclear Safety, in 1994. France signed the Joint Convention at the General Conference of the International Atomic Energy Agency (IAEA) held on 29 September 1997, the very first day the Joint Convention was opened for signature. She approved it on 22 February 2000 and filed the corresponding instruments with the IAEA on 27 April 2000. The Joint Convention entered into force on 18 June 2001. For many years, France has been taking an active part in the pursuit of international actions to reinforce nuclear safety and considers the Joint Convention to be a key step in that direction. The fields covered by the Joint Convention have long been part of the French approach to nuclear safety. This report is the fourth of its kind. It is published in accordance with Article 32 of the Joint Convention and presents the measures taken by France to meet each of her obligations set out in the Convention. The facilities and radioactive materials covered by the Joint Convention are much diversified in nature and are controlled in France by different regulatory authorities (see Section E). Over and above a specific threshold of radioactive content, a facility is referred to as a 'basic nuclear facility' (installation nucleaire de base - INB) and placed under the control of the French Nuclear Safety Authority (Autorite de surete nucleaire - ASN). Below that threshold and provided that the facility involved falls under a category of the nomenclature of classified facilities for other purposes than their radioactive materials, any facility may be considered as a 'classified facility on environmental-protection grounds' (installation classee pour la protection de l'environnement - ICPE) and placed under the control of the Ministry for the

Childhood road safety behaviors in China: a cross-sectional study of Guangzhou city.

Science.gov (United States)

Yu, Jie; Zou, Nan; Liu, Yue; Fu, Lianning; Liu, Liya; Yuan, Ann

2012-01-01

This article examines traffic safety behaviors for different types of road users among children aged 0 to 17 years in Guangzhou, China. A stratified cluster sample of 7034 children from pediatric clinics (816 children aged 0-2 years who are receiving vaccines), kindergartens (1148 children aged 3-5 years), primary schools (2410 children aged 6-11 years), and secondary schools (2660 children aged 12-17 years) was collected by self-reported questionnaire surveys. The respondents were instructed to respond to each behavior question, using response choices scoring from 0 to 3. An 18-item-weighted Road Safety Behavior Index (RSBI), including 5 items for walking, 7 items for cycling, 2 items for public transport, and 4 items for private motor vehicles, was developed to quantify the child road safety behaviors and further investigate their interrelations with the sociodemographic factors among different age groups and travel categories. A higher RSBI indicates a lower risk of childhood road safety. Results from statistical analysis indicate that (1) the effects of children's sociodemographic characteristics on the RSBIs differ greatly concerning each particular travel category; and (2) RSBIs are associated more with child-related characteristics than with parent-related characteristics as the age of the children's group increases. The research findings from analyzing the self-report questionnaires were further validated with field observational records, medical records, and police records. The article concludes with some recommendations for preventing the increasing toll of road traffic injury among Chinese children, which include (1) continuing educational efforts to increase knowledge of road safety and reduce traffic risk behaviors for children and their parents; (2) creating a safe and convenient environment for walking, cycling, and public transport travelers; and (3) promoting legislation and enforcement such as the mandatory usage of bicycle helmets and child

78 FR 57903 - Aerospace Safety Advisory Panel; Charter Renewal

Science.gov (United States)

2013-09-20

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice: 13-116] Aerospace Safety Advisory Panel... and amendment of the charter of the Aerospace Safety Advisory Panel. SUMMARY: Pursuant to sections 14... determined that renewal and amendment of the charter of the Aerospace Safety Advisory Panel is in the public...

Nuclear safety organisation in France

International Nuclear Information System (INIS)

1979-12-01

This report outlines the public authorities responsible for the safety of nuclear installations in France. The composition and responsibilities of the Central Safety Service of Nuclear Installations within the Ministry of Industry, the Institute of Nuclear Protection and Safety within the CEA, the Central Service of Protection Against Ionising Radiation and the Interministerial Committee of Nuclear Safety are given. Other areas covered include the technical safety examination of large nuclear installations, the occurrence of accidents, treatment and control of release of radioactive wastes and decommissioning. The section on regulations covers the authorisation procedure, plant commissioning, release of radioactive effluents, surveillance and protection of workers exposed to ionising radiation. The situation is compared with the USA and the Federal Republic of Germany. A list of commercial nuclear installations in France is given

A formal safety analysis for PLC software-based safety critical system using Z

International Nuclear Information System (INIS)

Koh, Jung Soo

1997-02-01

This paper describes a formal safety analysis technique which is demonstrated by performing empirical formal safety analysis with the case study of beamline hutch door Interlock system that is developed by using PLC (Programmable Logic Controller) systems at the Pohang Accelerator Laboratory. In order to perform formal safety analysis, we have built the Z formal specifications representation from user requirement written in ambiguous natural language and target PLC ladder logic, respectively. We have also studied the effective method to express typical PLC timer component by using specific Z formal notation which is supported by temporal history. We present a formal proof technique specifying and verifying that the hazardous states are not introduced into ladder logic in the PLC-based safety critical system. And also, we have found that some errors or mismatches in user requirement and final implemented PLC ladder logic while analyzing the process of the consistency and completeness of Z translated formal specifications. In the case of relatively small systems like Beamline hutch door interlock system, a formal safety analysis including explicit proof is highly recommended so that the safety of PLC-based critical system may be enhanced and guaranteed. It also provides a helpful benefits enough to comprehend user requirement expressed by ambiguous natural language

Condition Help: A Patient- and Family-Initiated Rapid Response System.

Science.gov (United States)

Eden, Elizabeth L; Rack, Laurie L; Chen, Ling-Wan; Bump, Gregory M

2017-03-01

Rapid response teams (RRTs) help in delivering safe, timely care. Typically they are activated by clinicians using specific parameters. Allowing patients and families to activate RRTs is a novel intervention. The University of Pittsburgh Medical Center developed and implemented a patient- and family-initiated rapid response system called Condition Help (CH). When the CH system is activated, a patient care liaison or an on-duty administrator meets bedside with the unit charge nurse to address the patient's concerns. In this study, we collected demographic data, call reasons, call designations (safety or nonsafety), and outcome information for all CH calls made during the period January 2012 through June 2015. Two hundred forty patients/family members made 367 CH calls during the study period. Most calls were made by patients (76.8%) rather than family members (21.8%). Of the 240 patients, 43 (18%) made multiple calls; their calls accounted for 46.3% of all calls (170/367). Inadequate pain control was the reason for the call in most cases (48.2%), followed by dissatisfaction with staff (12.5%). The majority of calls involved nonsafety issues (83.4%) rather than safety issues (11.4%). In 41.4% of cases, a change in care was made. Patient- and family-initiated RRTs are designed to engage patients and families in providing safer care. In the CH system, safety issues are identified, but the majority of calls involve nonsafety issues. Journal of Hospital Medicine 2017;12:157-161. © 2017 Society of Hospital Medicine

Safety assessment principles for nuclear plants

International Nuclear Information System (INIS)

1992-01-01

The present Safety Assessment Principles result from the revision of those which were drawn up following a recommendation arising from the Sizewell-B enquiry. The principles presented here relate only to nuclear safety; there is a section on risks from normal operation and accident conditions and the standards against which those risks are assessed. A major part of the document deals with the principles that cover the design of nuclear plants. The revised Safety assessment principles are aimed primarily at the safety assessment of new nuclear plants but they will also be used in assessing existing plants. (UK)

Status and trends in IAEA safety standards

International Nuclear Information System (INIS)

Lipar, M.

2004-01-01

While safety is a national responsibility, international standards and approaches to safety promote consistency and facilitate international technical co-operation and trade, and help to provide assurance that nuclear and radiation related technologies are used safely. The standards also provide support for States in meeting their international obligations. One general international obligation is that a State must not pursue activities that cause damage in another State. More specific obligations on Contracting States are set out in international safety related conventions. The internationally agreed IAEA safety standards provide the basis for States to demonstrate that they are meeting these obligations. These standards are founded in the IAEA's Statute, which authorizes the Agency to establish standards of safety for nuclear and radiation related facilities and activities and to provide for their application. The safety standards reflect an international consensus on what constitutes a high level of safety for protecting people and the environment. (orig.) [de

14 CFR 125.211 - Seat and safety belts.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Seat and safety belts. 125.211 Section 125... Requirements § 125.211 Seat and safety belts. (a) No person may operate an airplane unless there are available... the airplane who is at least 2 years old; and (2) An approved safety belt for separate use by each...

Clear progress in nuclear safety worldwide: Convention on nuclear safety concludes

International Nuclear Information System (INIS)

2002-01-01

It has been concluded that a significant progress has been observed in a number of key areas, such as strengthened legislation, regulatory independence, the availability of financial resources, enhanced emergency preparedness and safety improvements at nuclear power plants built to earlier standards. The objective of the Convention is to achieve and maintain a high level of nuclear safety worldwide. During the two week Review Meeting, parties engaged in a 'peer review' process in which the National Reports from individual States were collectively examined and discussed, with written replies provided to all the questions raised. Clear improvement was noted in the quality of the National Reports, the number of questions and the openness and quality of discussion and answers. The Contracting Parties praised the IAEA's various safety review missions and services, which they use widely to help enhance the effectiveness of their national safety arrangements. Forty-six contracting parties participated at the Review Meeting with over 400 delegates attending, including many heads and senior officers from regulatory bodies and experts from industry. To date, the Convention has been signed by sixty-five States and ratified by fifty-four, representing 428 of the 448 nuclear power reactors worldwide

Criticality safety evaluations - a {open_quotes}stalking horse{close_quotes} for integrated safety assessment

Energy Technology Data Exchange (ETDEWEB)

Williams, R.A. [Westinghouse Electric Corp., Columbia, SC (United States)

1995-12-31

The Columbia Fuel Fabrication Facility of the Westinghouse Commercial Nuclear Fuel Division manufactures low-enriched uranium fuel and associated components for use in commercial pressurized water power reactors. To support development of a comprehensive integrated safety assessment (ISA) for the facility, as well as to address increasing U.S. Nuclear Regulatory Commission (NRC) expectations regarding such a facility`s criticality safety assessments, a project is under way to complete criticality safety evaluations (CSEs) of all plant systems used in processing nuclear materials. Each CSE is made up of seven sections, prepared by a multidisciplinary team of process engineers, systems engineers, safety engineers, maintenance representatives, and operators. This paper provides a cursory outline of the type of information presented in a CSE.

Safety culture in nuclear installations. Management of safety and safety culture in Indian NPPs

International Nuclear Information System (INIS)

Rawal, S.C.

2002-01-01

Nuclear Power Corporation Of India Ltd. (NPCIL) is a company owned by Government of India and is responsible for Design, Construction, Commissioning, Operation and Decommissioning of Nuclear Power plants in India. Presently, a total of 13 Nuclear power Stations are in operation with an installed capacity of 2620 MWe and 2 VVR type PWR Units of 1000 MWe capacity each, 2 PHWR type units of 500 MWe capacity each and 4 PHWR type 220 MWe capacity each are under construction. NPPs generation capacity has been increased from 70% to 85% in the span Of last 7 years with high level of safety standards. This could be achieved through Management commitment towards building a strong Safety Culture. Safety culture is that assembly of characteristics and attitudes in organisation and individuals which establishes that as an overriding priority nuclear plant safety issues receives the attention warranted by their significance. This definition of safety culture brings out two major components in its manifestation. The framework within which individuals within the organisation works.The attitude and response of individual towards the safety issues over productivity and economics in the organisational work practices. The two attributes of safety culture are built in and upgraded in each individuals through special training at the time of entry in the organisation and later through in built procedures in the work practices, motivation and encouragement for free participation of each individuals. Individuals are encouraged to participate in Quality circle teams at the sectional level and review of safety proposal originated by individuals in Station operation Review Committee at Station level, in addition to this to continuously enhance the safety culture, refresher training courses are being organised at regular intervals. The safety related proposals are categorised in to two namely: Proposals from Operating Plants, and Proposals from projects and Design. The concept of safety

Leadership and occupational safety and health (OSH): an expert analysis

NARCIS (Netherlands)

Elsler, D.; Flintrop, J.; Kaluza, S.; Hauke, A.; Starren, A.; Drupsteen, L.; Bell, N.

2012-01-01

In EU legislation as well as in scientific literature ever more attention is being paid to the important role of leadership in the improvement of Occupational Safety and Health (OSH). Improving the safety behaviour of employees requires understanding of the good leadership practices that can help

Inland Waterway Environmental Safety

Science.gov (United States)

Reshnyak, Valery; Sokolov, Sergey; Nyrkov, Anatoliy; Budnik, Vlad

2018-05-01

The article presents the results of development of the main components of the environmental safety when operating vessels on inland waterways, which include strategy selection ensuring the environmental safety of vessels, the selection and justification of a complex of environmental technical means, activities to ensure operation of vessels taking into account the environmental technical means. Measures to ensure environmental safety are developed on the basis of the principles aimed at ensuring environmental safety of vessels. They include the development of strategies for the use of environmental protection equipment, which are determined by the conditions for wastewater treatment of purified sewage and oily bilge water as well as technical characteristics of the vessels, the introduction of the process of the out-of-the-vessel processing of ship pollution as a technology for their movement. This must take into account the operating conditions of vessels on different sections of waterways. An algorithm of actions aimed at ensuring ecological safety of operated vessels is proposed.

Designing a Safety Reporting Smartphone Application to Improve Patient Safety After Total Hip Arthroplasty.

Science.gov (United States)

Krumsvik, Ole Andreas; Babic, Ankica

2017-01-01

This paper presents a safety reporting smartphone application which is expected to reduce the occurrence of postoperative adverse events after total hip arthroplasty (THA). A user-centered design approach was utilized to facilitate optimal user experience. Two main implemented functionalities capture patient pain levels and well-being, the two dimensions of patient status that are intuitive and commonly checked. For these and other functionalities, mobile technology could enable timely safety reporting and collection of patient data out of a hospital setting. The HCI expert, and healthcare professionals from the Haukeland University Hospital in Bergen have assessed the design with respect to the interaction flow, information content, and self-reporting functionalities. They have found it to be practical, intuitive, sufficient and simple for users. Patient self-reporting could help recognizing safety issues and adverse events.

IAEA code and safety guides on quality assurance

International Nuclear Information System (INIS)

Raisic, N.

1980-01-01

In the framework of its programme in safety standards development, the IAEA has recently published a Code of Practice on Quality Assurance for Safety in Nuclear Power Plants. The Code establishes minimum requirements for quality assurance which Member States should use in the context of their own nuclear safety requirements. A series of 10 Safety Guides which describe acceptable methods of implementing the requirements of specific sections of the Code are in preparation. (orig.)

Final Safety Analysis Document for Building 693 Chemical Waste Storage Building at Lawrence Livermore National Laboratory

International Nuclear Information System (INIS)

Salazar, R.J.; Lane, S.

1992-02-01

This Safety Analysis Document (SAD) for the Lawrence Livermore National Laboratory (LLNL) Building 693, Chemical Waste Storage Building (desipated as Building 693 Container Storage Unit in the Laboratory's RCRA Part B permit application), provides the necessary information and analyses to conclude that Building 693 can be operated at low risk without unduly endangering the safety of the building operating personnel or adversely affecting the public or the environment. This Building 693 SAD consists of eight sections and supporting appendices. Section 1 presents a summary of the facility designs and operations and Section 2 summarizes the safety analysis method and results. Section 3 describes the site, the facility desip, operations and management structure. Sections 4 and 5 present the safety analysis and operational safety requirements (OSRs). Section 6 reviews Hazardous Waste Management's (HWM) Quality Assurance (QA) program. Section 7 lists the references and background material used in the preparation of this report Section 8 lists acronyms, abbreviations and symbols. Appendices contain supporting analyses, definitions, and descriptions that are referenced in the body of this report

Radiation safety requirements for radionuclide laboratories

International Nuclear Information System (INIS)

1993-01-01

In accordance with the section 26 of the Finnish Radiation Act (592/91) the safety requirements to be taken into account in planning laboratories and other premises, which affect safety in the use of radioactive materials, are confirmed by the Finnish Centre for Radiation and Nuclear Safety. The guide specifies the requirements for laboratories and storage rooms in which radioactive materials are used or stored as unsealed sources. There are also some general instructions concerning work procedures in a radionuclide laboratory

Passive Safety Features for Small Modular Reactors

International Nuclear Information System (INIS)

Ingersoll, Daniel T.

2010-01-01

The rapid growth in the size and complexity of commercial nuclear power plants in the 1970s spawned an interest in smaller, simpler designs that are inherently or intrinsically safe through the use of passive design features. Several designs were developed, but none were ever built, although some of their passive safety features were incorporated into large commercial plant designs that are being planned or built today. In recent years, several reactor vendors are actively redeveloping small modular reactor (SMR) designs with even greater use of passive features. Several designs incorporate the ultimate in passive safety they completely eliminate specific accident initiators from the design. Other design features help to reduce the likelihood of an accident or help to mitigate the accidents consequences, should one occur. While some passive safety features are common to most SMR designs, irrespective of the coolant technology, other features are specific to water, gas, or liquid-metal cooled SMR designs. The extensive use of passive safety features in SMRs promise to make these plants highly robust, protecting both the general public and the owner/investor. Once demonstrated, these plants should allow nuclear power to be used confidently for a broader range of customers and applications than will be possible with large plants alone.

29 CFR 1977.3 - General requirements of section 11(c) of the Act.

Science.gov (United States)

2010-07-01

... WILLIAMS-STEIGER OCCUPATIONAL SAFETY AND HEALTH ACT OF 1970 General § 1977.3 General requirements of... 29 Labor 9 2010-07-01 2010-07-01 false General requirements of section 11(c) of the Act. 1977.3 Section 1977.3 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH...

Evaluation of seismic hazards for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2002-01-01

The main objective of this Safety Guide is to provide recommendations on how to determine the ground motion hazards for a plant at a particular site and the potential for surface faulting, which could affect the feasibility of construction and safe operation of a plant at that site. The guidelines and procedures presented in this Safety Guide can appropriately be used in evaluations of site suitability and seismic hazards for nuclear power plants in any seismotectonic environment. The probabilistic seismic hazard analysis recommended in this Safety Guide also addresses the needs for seismic hazard analysis of external event PSAs conducted for nuclear power plants. Many of the methods and processes described may also be applicable to nuclear facilities other than power plants. Other phenomena of permanent ground displacement (liquefaction, slope instability, subsidence and collapse) as well as the topic of seismically induced flooding are treated in Safety Guides relating to foundation safety and coastal flooding. Recommendations of a general nature are given in Section 2. Section 3 discusses the acquisition of a database containing the information needed to evaluate and address all hazards associated with earthquakes. Section 4 covers the use of this database for construction of a seismotectonic model. Sections 5 and 6 review ground motion hazards and evaluations of the potential for surface faulting, respectively. Section 7 addresses quality assurance in the evaluation of seismic hazards for nuclear power plants

Definition and Means of Maintaining the Criticality Prevention Design Features Portion of the PFP Safety Envelope

International Nuclear Information System (INIS)

RAMBLE, A.L.

2000-01-01

The purpose of this document is to record the technical evaluation of the Operational Safety Requirements described in the Plutonium Finishing Plant Final (PFP) Operational Safety Requirements, WHC-SD-CP-OSR-010. Rev. 0-N , Section 3.1.1, ''Criticality Prevention System.'' This document, with its appendices, provides the following: (1) The results of a review of Criticality Safety Analysis Reports (CSAR), later called Criticality Safety Evaluation Reports (CSER), and Criticality Prevention Specifications (CPS) to determine which equipment or components analyzed in the CSER or CPS are considered as one of the two unlikely, independent, and concurrent changes before a criticality accident is possible. (2) Evaluations of equipment or components to determine the safety boundary for the system (Section 4). (3) A list of essential drawings that show the safety system or component (Appendix A). (4) A list of the safety envelope (SE) equipment (Appendix B). (5) Functional requirements for the individual safety envelope equipment (Sections 3 and 4). (6) A list of the operational and surveillance procedures necessary to maintain the system equipment within the safety envelope (Section 5)

29 CFR 1977.22 - Employee refusal to comply with safety rules.

Science.gov (United States)

2010-07-01

... WILLIAMS-STEIGER OCCUPATIONAL SAFETY AND HEALTH ACT OF 1970 Some Specific Subjects § 1977.22 Employee refusal to comply with safety rules. Employees who refuse to comply with occupational safety and health... Section 1977.22 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH...

78 FR 46560 - Pipeline Safety: Class Location Requirements

Science.gov (United States)

2013-08-01

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... class location requirements for gas transmission pipelines. Section 5 of the Pipeline Safety, Regulatory... and, with respect to gas transmission pipeline facilities, whether applying IMP requirements to...

Helping Birmingham Families Early: The "Signs of Safety and Well-Being" Practice Framework

Science.gov (United States)

Stanley, Tony; Keenan, Karol; Roberts, Dawn; Moore, Richard

2018-01-01

Rising demand for early help services is currently taking place against a backdrop of closing or reduced services and shrinking public authority budgets across England. Complicating matters is the wide variety of service orientations and differences in assessments offered to vulnerable families. This can be confusing for them. Moreover, this is an…

Operational limits and conditions and operating procedures for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2005-01-01

This Safety Guide was prepared as part of the Agency's programme for establishing safety standards relating to nuclear power plants. The present Safety Guide supersedes the IAEA Safety Guide on Operational Limits and Conditions for Nuclear Power Plants which was issued in 1979 as Safety Series No. 50-SG-O3. For a nuclear power plant to be operated in a safe manner, the provisions made in the final design and subsequent modifications shall be reflected in limitations on plant operating parameters and in the requirements on plant equipment and personnel. Under the responsibility of the operating organization, these shall be developed during the design safety evaluation as a set of operational limits and conditions (OLCs). A major contribution to compliance with the OLCs is made by the development and utilization of operating procedures (OPs) that are consistent with and fully implement the OLCs. The requirements for the OLCs and OPs are established in Section 5 of the IAEA Safety Requirements publication Safety of Nuclear Power Plants: Operation, which this Safety Guide supplements. The purpose of this Safety Guide is to provide guidance on the development, content and implementation of OLCs and OPs. The Safety Guide is directed at both regulators and owners/operators. This Safety Guide covers the concept of OLCs, their content as applicable to land based stationary power plants with thermal neutron reactors, and the responsibilities of the operating organization regarding their establishment, modification, compliance and documentation. The OPs to support the implementation of the OLCs and to ensure their observance are also within the scope of this Safety Guide. The particular aspects of the procedures for maintenance, surveillance, in-service inspection and other safety related activities in connection with the safe operation of nuclear power plants are outside the scope of this Safety Guide but can be found in other IAEA Safety Guides. Section 2 indicates the

Operational limits and conditions and operating procedures for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2000-01-01

This Safety Guide was prepared as part of the Agency's programme for establishing safety standards relating to nuclear power plants. The present Safety Guide supersedes the IAEA Safety Guide on Operational Limits and Conditions for Nuclear Power Plants which was issued in 1979 as Safety Series No. 50-SG-O3. For a nuclear power plant to be operated in a safe manner, the provisions made in the final design and subsequent modifications shall be reflected in limitations on plant operating parameters and in the requirements on plant equipment and personnel. Under the responsibility of the operating organization, these shall be developed during the design safety evaluation as a set of operational limits and conditions (OLCs). A major contribution to compliance with the OLCs is made by the development and utilization of operating procedures (OPs) that are consistent with and fully implement the OLCs. The requirements for the OLCs and OPs are established in Section 5 of the IAEA Safety Requirements publication Safety of Nuclear Power Plants: Operation, which this Safety Guide supplements. The purpose of this Safety Guide is to provide guidance on the development, content and implementation of OLCs and OPs. The Safety Guide is directed at both regulators and owners/operators. This Safety Guide covers the concept of OLCs, their content as applicable to land based stationary power plants with thermal neutron reactors, and the responsibilities of the operating organization regarding their establishment, modification, compliance and documentation. The OPs to support the implementation of the OLCs and to ensure their observance are also within the scope of this Safety Guide. The particular aspects of the procedures for maintenance, surveillance, in-service inspection and other safety related activities in connection with the safe operation of nuclear power plants are outside the scope of this Safety Guide but can be found in other IAEA Safety Guides. Section 2 indicates the

78 FR 57320 - Food and Drug Administration Food Safety Modernization Act: Proposed Rules on Foreign Supplier...

Science.gov (United States)

2013-09-18

... help manage the safety of their global food supply chains. The purpose of these public meetings is to... submitting either electronic or written comments to FDA's Division of Dockets Management. ADDRESSES: See..., to better protect public health by helping to ensure the safety and security of the food supply. FSMA...

Researchers' Roles in Patient Safety Improvement.

Science.gov (United States)

Pietikäinen, Elina; Reiman, Teemu; Heikkilä, Jouko; Macchi, Luigi

2016-03-01

In this article, we explore how researchers can contribute to patient safety improvement. We aim to expand the instrumental role researchers have often occupied in relation to patient safety improvement. We reflect on our own improvement model and experiences as patient safety researchers in an ongoing Finnish multi-actor innovation project through self-reflective narration. Our own patient safety improvement model can be described as systemic. Based on the purpose of the innovation project, our improvement model, and the improvement models of the other actors in the project, we have carried out a wide range of activities. Our activities can be summarized in 8 overlapping patient safety improvement roles: modeler, influencer, supplier, producer, ideator, reflector, facilitator, and negotiator. When working side by side with "practice," researchers are offered and engage in several different activities. The way researchers contribute to patient safety improvement and balance between different roles depends on the purpose of the study, as well as on the underlying patient safety improvement models. Different patient safety research paradigms seem to emphasize different improvement roles, and thus, they also face different challenges. Open reflection on the underlying improvement models and roles can help researchers with different backgrounds-as well as other actors involved in patient safety improvement-in structuring their work and collaborating productively.

46 CFR 61.05-20 - Boiler safety valves.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Boiler safety valves. 61.05-20 Section 61.05-20 Shipping... INSPECTIONS Tests and Inspections of Boilers § 61.05-20 Boiler safety valves. Each safety valve for a drum, superheater, or reheater of a boiler shall be tested at the interval specified by table 61.05-10. [CGD 95-028...

Help Helps, but Only so Much: Research on Help Seeking with Intelligent Tutoring Systems

Science.gov (United States)

Aleven, Vincent; Roll, Ido; McLaren, Bruce M.; Koedinger, Kenneth R.

2016-01-01

Help seeking is an important process in self-regulated learning (SRL). It may influence learning with intelligent tutoring systems (ITSs), because many ITSs provide help, often at the student's request. The Help Tutor was a tutor agent that gave in-context, real-time feedback on students' help-seeking behavior, as they were learning with an ITS.…

The directive establishing a community framework for the nuclear safety of nuclear installations: the European Union approach to nuclear safety

International Nuclear Information System (INIS)

Garribba, M.; Chirtes, A.; Nauduzaite, M.

2009-01-01

This article aims at explaining the evolution leading to the adoption of the recent Council Directive 2009/71/EURATOM establishing a Community framework for the nuclear safety of nuclear installations adopted with the consent of all 27 members states following the overwhelming support of the European Parliament, that creates for the first time, a binding legal framework that brings legal certainty to European Union citizens and reinforces the role and independence of national regulators. The paper is divided into three sections. The first section addresses the competence of the European Atomic energy Community to legislate in the area of nuclear safety. It focuses on the 2002 landmark ruling of the European Court of justice that confirmed this competence by recognizing the intrinsic link between radiation protection and nuclear safety. The second part describes the history of the Nuclear safety directive from the initial 2003 European Commission proposal to today 's text in force. The third part is dedicated to a description of the content of the Directive and its implications on the further development of nuclear safety in the European Union. (N.C.)

Health, Safety, and Environment Division annual report, 1988

International Nuclear Information System (INIS)

Rosenthal, M.A.

1989-10-01

The primary responsibility of the Health, Safety, and Environment (HSE) Division at the Los Alamos National Laboratory is to provide comprehensive occupational health and safety programs, waste processing, and environmental protection. These activities are designed to protect the worker, the public, and the environment. Many disciplines are required to meet the responsibilities, including radiation protection, industrial hygiene, safety, occupational medicine, environmental science, epidemiology, and waste management. New and challenging health and safety problems occasionally arise from the diverse research and development work of the Laboratory. Research programs in HSE Division often stem from these applied needs. These programs continue but are also extended, as needed, to study specific problems for the Department of Energy and to help develop better occupational health and safety practices. 52 refs

Need for an "integrated safety assessment" of GMOs, linking food safety and environmental considerations.

Science.gov (United States)

Haslberger, Alexander G

2006-05-03

information. An integrated assessment might help to focus and save capacities in highly technical areas such as molecular characterization or profiling, which are often necessary for both assessments. In the area of establishing international standards for traded foods, such as for the newly created Standards in Trade and Development Facility (STDF), an integrated assessment might help in the consideration of important environmental aspects involved in health and food safety. Furthermore, an established integrated view on GMOs may create greater consumer confidence in the technology.

Dependency safety for Java - implementing failboxes

NARCIS (Netherlands)

Bosnacki, D.; van den Brand, M.G.J.; Denissen, P.E.J.G.; Huizing, C.; Jacobs, B.; Kuiper, R.; Wijs, A.J.; Wiłkowski, M.; Zhang, D.

2016-01-01

Exception mechanisms help to ensure that a program satisfies the important robustness criterion of dependency safety: if an operation fails, no code that depends on the operation's successful completion is executed anymore nor will wait for the completion. However, the exception handling mechanisms

Highlights of the IAEA scientific forum: Nuclear science: Physics helping the world

International Nuclear Information System (INIS)

Richter, B.

2005-01-01

The conclusions drawn at the Scientific Forum during the 49th regular Session of the IAEA General Conference entitled 'Nuclear Physics: Helping the World' are as follows. Physics is indeed helping the world and the IAEA, applications of nuclear are continuing to grow, nuclear power is likely to increase dramatically, work on 'Beyond Kyoto' should begin and nuclear should be part of any 'Clean Development Mechanism'. IAEA should look again at the role of R and D in safeguards, IAEA should look at safety issues in newly nuclear countries, internationalizing the fuel cycle is right IF one can do it

[Successful patient-activated help call for a doctor during in-hospital stay].

Science.gov (United States)

Hansen, Mette Mejlby; Hasselkvist, Birgith; Thordal, Sofie; Riiskjær, Erik; Kelsen, Jens

2014-09-29

Department of Medicine, Randers Regional Hospital, conducted a study of patient-activated help call, involving 1,050 patients with nearly 3,700 days in-hospital stay. Patients were encou-raged to bypass traditional clinical hierarchy of communication when they felt, that their concern was not met by the staff. Three help calls were related to the management of pain. In two cases it resulted in a surgical procedure. A survey including 104 patients revealed that one third reported that patient safety was improved by the initiative and nearly three quarters re-ported that they would be willing to activate the call.

46 CFR 62.35-15 - Fire safety.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Fire safety. 62.35-15 Section 62.35-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING VITAL SYSTEM AUTOMATION Requirements for Specific Types of Automated Vital Systems § 62.35-15 Fire safety. (a) All required fire pump...

Measuring enterprise proactiveness in managing occupational safety

DEFF Research Database (Denmark)

Sønderstrup-Andersen, Hans H. K.; Fløcke, Thomas; Mikkelsen, Kim Lyngby

2010-01-01

The aim of this paper is to communicate results, and lessons learned, from developing and applying a national questionnaire based survey for measuring the initiation of occupational safety activities in Danish enterprises and public institutions1. The survey is cross-sectional and it is part...... on the safety attitude index....