2011 Annual Criticality Safety Program Performance Summary

Energy Technology Data Exchange (ETDEWEB)

Andrea Hoffman

2011-12-01

The 2011 review of the INL Criticality Safety Program has determined that the program is robust and effective. The review was prepared for, and fulfills Contract Data Requirements List (CDRL) item H.20, 'Annual Criticality Safety Program performance summary that includes the status of assessments, issues, corrective actions, infractions, requirements management, training, and programmatic support.' This performance summary addresses the status of these important elements of the INL Criticality Safety Program. Assessments - Assessments in 2011 were planned and scheduled. The scheduled assessments included a Criticality Safety Program Effectiveness Review, Criticality Control Area Inspections, a Protection of Controlled Unclassified Information Inspection, an Assessment of Criticality Safety SQA, and this management assessment of the Criticality Safety Program. All of the assessments were completed with the exception of the 'Effectiveness Review' for SSPSF, which was delayed due to emerging work. Although minor issues were identified in the assessments, no issues or combination of issues indicated that the INL Criticality Safety Program was ineffective. The identification of issues demonstrates the importance of an assessment program to the overall health and effectiveness of the INL Criticality Safety Program. Issues and Corrective Actions - There are relatively few criticality safety related issues in the Laboratory ICAMS system. Most were identified by Criticality Safety Program assessments. No issues indicate ineffectiveness in the INL Criticality Safety Program. All of the issues are being worked and there are no imminent criticality concerns. Infractions - There was one criticality safety related violation in 2011. On January 18, 2011, it was discovered that a fuel plate bundle in the Nuclear Materials Inspection and Storage (NMIS) facility exceeded the fissionable mass limit, resulting in a technical safety requirement (TSR) violation. The

10 CFR 70.62 - Safety program and integrated safety analysis.

Science.gov (United States)

2010-01-01

...; (iv) Potential accident sequences caused by process deviations or other events internal to the... have experience in nuclear criticality safety, radiation safety, fire safety, and chemical process... this safety program; namely, process safety information, integrated safety analysis, and management...

A Laboratory Safety Program at Delaware.

Science.gov (United States)

Whitmyre, George; Sandler, Stanley I.

1986-01-01

Describes a laboratory safety program at the University of Delaware. Includes a history of the program's development, along with standard safety training and inspections now being implemented. Outlines a two-day laboratory safety course given to all graduate students and staff in chemical engineering. (TW)

Big data for risk analysis: The future of safe railways

Energy Technology Data Exchange (ETDEWEB)

Figueres Esteban, M.

2016-07-01

New technology brings ever more data to support decision-making for intelligent transport systems. Big Data is no longer a futuristic challenge, it is happening right now: modern railway systems have countless sources of data providing a massive quantity of diverse information on every aspect of operations such as train position and speed, brake applications, passenger numbers, status of the signaling system or reported incidents.The traditional approaches to safety management on the railways have relied on static data sources to populate traditional safety tools such as bow-tie models and fault trees. The Big Data Risk Analysis (BDRA) program for Railways at the University of Huddersfield is investigating how the many Big Data sources from the railway can be combined in a meaningful way to provide a better understanding about the GB railway systems and the environment within which they operate.Moving to BDRA is not simply a matter of scaling-up existing analysis techniques. BDRA has to coordinate and combine a wide range of sources with different types of data and accuracy, and that is not straight-forward. BDRA is structured around three components: data, ontology and visualisation. Each of these components is critical to support the overall framework. This paper describes how these three components are used to get safety knowledge from two data sources by means of ontologies from text documents. This is a part of the ongoing BDRA research that is looking at integrating many large and varied data sources to support railway safety and decision-makers. (Author)

77 FR 70409 - System Safety Program

Science.gov (United States)

2012-11-26

...-0060, Notice No. 2] 2130-AC31 System Safety Program AGENCY: Federal Railroad Administration (FRA... rulemaking (NPRM) published on September 7, 2012, FRA proposed regulations to require commuter and intercity passenger railroads to develop and implement a system safety program (SSP) to improve the safety of their...

Krsko NPP Periodic Safety Review program

International Nuclear Information System (INIS)

Basic, I.; Spiler, J.; Novsak, M.

2001-01-01

The need for conducting a Periodic Safety Review for the Krsko NPP has been clearly recognized both by the NEK and the regulator (SNSA). The PSR would be highly desirable both in the light of current trends in safety oversight practices and because of many benefits it is capable to provide. On January 11, 2001 the SNSA issued a decision requesting the Krsko NPP to prepare a program and determine a schedule for the implementation of the program for 'Periodic Safety Review of NPP Krsko'. The program, which is required to be in accordance with the IAEA safety philosophy and with the EU practice, was submitted for the approval to the SNSA by the end of March 2001. The paper summarizes Krsko NPP Periodic Safety Review Program [1] including implemented SNSA and IAEA Expert Mission comments.(author)

Aviation Safety/Automation Program Conference

Science.gov (United States)

Morello, Samuel A. (Compiler)

1990-01-01

The Aviation Safety/Automation Program Conference - 1989 was sponsored by the NASA Langley Research Center on 11 to 12 October 1989. The conference, held at the Sheraton Beach Inn and Conference Center, Virginia Beach, Virginia, was chaired by Samuel A. Morello. The primary objective of the conference was to ensure effective communication and technology transfer by providing a forum for technical interchange of current operational problems and program results to date. The Aviation Safety/Automation Program has as its primary goal to improve the safety of the national airspace system through the development and integration of human-centered automation technologies for aircraft crews and air traffic controllers.

AEC controlled area safety program

Energy Technology Data Exchange (ETDEWEB)

Hendricks, D W [Nevada Operations Office, Atomic Energy Commission, Las Vegas, NV (United States)

1969-07-01

The detonation of underground nuclear explosives and the subsequent data recovery efforts require a comprehensive pre- and post-detonation safety program for workers within the controlled area. The general personnel monitoring and environmental surveillance program at the Nevada Test Site are presented. Some of the more unusual health-physics aspects involved in the operation of this program are also discussed. The application of experience gained at the Nevada Test Site is illustrated by description of the on-site operational and safety programs established for Project Gasbuggy. (author)

AEC controlled area safety program

International Nuclear Information System (INIS)

Hendricks, D.W.

1969-01-01

The detonation of underground nuclear explosives and the subsequent data recovery efforts require a comprehensive pre- and post-detonation safety program for workers within the controlled area. The general personnel monitoring and environmental surveillance program at the Nevada Test Site are presented. Some of the more unusual health-physics aspects involved in the operation of this program are also discussed. The application of experience gained at the Nevada Test Site is illustrated by description of the on-site operational and safety programs established for Project Gasbuggy. (author)

Fusion safety program plan

International Nuclear Information System (INIS)

Crocker, J.G.; Holland, D.F.; Herring, J.S.

1980-09-01

The program plan consists of research that has been divided into 13 different areas. These areas focus on the radioactive inventories that are expected in fusion reactors, the energy sources potentially available to release a portion of these inventories, and analysis and design techniques to assess and ensure that the safety risks associated with operation of magnetic fusion facilities are acceptably low. The document presents both long-term program requirements that must be fulfilled as part of the commercialization of fusion power and a five-year plan for each of the 13 different program areas. Also presented is a general discussion of magnetic fusion reactor safety, a method for establishing priorities in the program, and specific priority ratings for each task in the five-year plan

Highway Safety Program Manual: Volume 8: Alcohol in Relation to Highway Safety.

Science.gov (United States)

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 8 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on alcohol in relation to highway safety. The purpose and objectives of the alcohol program are outlined. Federal authority in the area of highway safety and general policies regarding…

Implementation of a Radiological Safety Coach program

Energy Technology Data Exchange (ETDEWEB)

Konzen, K.K. [Safe Sites of Colorado, Golden, CO (United States). Rocky Flats Environmental Technology Site; Langsted, J.M. [M.H. Chew and Associates, Golden, CO (United States)

1998-02-01

The Safe Sites of Colorado Radiological Safety program has implemented a Safety Coach position, responsible for mentoring workers and line management by providing effective on-the-job radiological skills training and explanation of the rational for radiological safety requirements. This position is significantly different from a traditional classroom instructor or a facility health physicist, and provides workers with a level of radiological safety guidance not routinely provided by typical training programs. Implementation of this position presents a challenge in providing effective instruction, requiring rapport with the radiological worker not typically developed in the routine radiological training environment. The value of this unique training is discussed in perspective with cost-savings through better radiological control. Measures of success were developed to quantify program performance and providing a realistic picture of the benefits of providing one-on-one or small group training. This paper provides a description of the unique features of the program, measures of success for the program, a formula for implementing this program at other facilities, and a strong argument for the success (or failure) of the program in a time of increased radiological safety emphasis and reduced radiological safety budgets.

Implementation of a Radiological Safety Coach program

International Nuclear Information System (INIS)

Konzen, K.K.

1998-01-01

The Safe Sites of Colorado Radiological Safety program has implemented a Safety Coach position, responsible for mentoring workers and line management by providing effective on-the-job radiological skills training and explanation of the rational for radiological safety requirements. This position is significantly different from a traditional classroom instructor or a facility health physicist, and provides workers with a level of radiological safety guidance not routinely provided by typical training programs. Implementation of this position presents a challenge in providing effective instruction, requiring rapport with the radiological worker not typically developed in the routine radiological training environment. The value of this unique training is discussed in perspective with cost-savings through better radiological control. Measures of success were developed to quantify program performance and providing a realistic picture of the benefits of providing one-on-one or small group training. This paper provides a description of the unique features of the program, measures of success for the program, a formula for implementing this program at other facilities, and a strong argument for the success (or failure) of the program in a time of increased radiological safety emphasis and reduced radiological safety budgets

Public Health Service Safety Program

Energy Technology Data Exchange (ETDEWEB)

McBride, J R [Southwestern Radiological Health Laboratory, Las Vegas, NV (United States)

1969-07-01

Off-Site Radiological Safety Programs conducted on past Plowshare experimental projects by the Southwestern Radiological Health Laboratory for the AEC will be presented. Emphasis will be placed on the evaluation of the potential radiation hazard to off-site residents, the development of an appropriate safety plan, pre- and post-shot surveillance activities, and the necessity for a comprehensive and continuing community relations program. In consideration of the possible wide use of nuclear explosives in industrial applications, a new approach to off-site radiological safety will be discussed. (author)

Public Health Service Safety Program

International Nuclear Information System (INIS)

McBride, J.R.

1969-01-01

Off-Site Radiological Safety Programs conducted on past Plowshare experimental projects by the Southwestern Radiological Health Laboratory for the AEC will be presented. Emphasis will be placed on the evaluation of the potential radiation hazard to off-site residents, the development of an appropriate safety plan, pre- and post-shot surveillance activities, and the necessity for a comprehensive and continuing community relations program. In consideration of the possible wide use of nuclear explosives in industrial applications, a new approach to off-site radiological safety will be discussed. (author)

The BigBOSS Experiment

Energy Technology Data Exchange (ETDEWEB)

Schelgel, D.; Abdalla, F.; Abraham, T.; Ahn, C.; Allende Prieto, C.; Annis, J.; Aubourg, E.; Azzaro, M.; Bailey, S.; Baltay, C.; Baugh, C.; /APC, Paris /Brookhaven /IRFU, Saclay /Marseille, CPPM /Marseille, CPT /Durham U. / /IEU, Seoul /Fermilab /IAA, Granada /IAC, La Laguna

2011-01-01

BigBOSS will obtain observational constraints that will bear on three of the four 'science frontier' questions identified by the Astro2010 Cosmology and Fundamental Phyics Panel of the Decadal Survey: Why is the universe accelerating; what is dark matter and what are the properties of neutrinos? Indeed, the BigBOSS project was recommended for substantial immediate R and D support the PASAG report. The second highest ground-based priority from the Astro2010 Decadal Survey was the creation of a funding line within the NSF to support a 'Mid-Scale Innovations' program, and it used BigBOSS as a 'compelling' example for support. This choice was the result of the Decadal Survey's Program Priorization panels reviewing 29 mid-scale projects and recommending BigBOSS 'very highly'.

The Design of Intelligent Repair Welding Mechanism and Relative Control System of Big Gear

Directory of Open Access Journals (Sweden)

Hong-Yu LIU

2014-10-01

Full Text Available Effective repair of worn big gear has large influence on ensuring safety production and enhancing economic benefits. A kind of intelligent repair welding method was put forward mainly aimed at the big gear restriction conditions of high production cost, long production cycle and high- intensity artificial repair welding work. Big gear repair welding mechanism was designed in this paper. The work principle and part selection of big gear repair welding mechanism was introduced. The three dimensional mode of big gear repair welding mechanism was constructed by Pro/E three dimensional design software. Three dimensional motions can be realized by motor controlling ball screw. According to involute gear feature, the complicated curve motion on curved gear surface can be transformed to linear motion by orientation. By this way, the repair welding on worn gear area can be realized. In the design of big gear repair welding mechanism control system, Siemens S7-200 series hardware was chosen. Siemens STEP7 programming software was chosen as system design tool. The entire repair welding process was simulated by experiment simulation. It provides a kind of practical and feasible method for the intelligent repair welding of big worn gear.

NASA Aviation Safety Program Systems Analysis/Program Assessment Metrics Review

Science.gov (United States)

Louis, Garrick E.; Anderson, Katherine; Ahmad, Tisan; Bouabid, Ali; Siriwardana, Maya; Guilbaud, Patrick

2003-01-01

The goal of this project is to evaluate the metrics and processes used by NASA's Aviation Safety Program in assessing technologies that contribute to NASA's aviation safety goals. There were three objectives for reaching this goal. First, NASA's main objectives for aviation safety were documented and their consistency was checked against the main objectives of the Aviation Safety Program. Next, the metrics used for technology investment by the Program Assessment function of AvSP were evaluated. Finally, other metrics that could be used by the Program Assessment Team (PAT) were identified and evaluated. This investigation revealed that the objectives are in fact consistent across organizational levels at NASA and with the FAA. Some of the major issues discussed in this study which should be further investigated, are the removal of the Cost and Return-on-Investment metrics, the lack of the metrics to measure the balance of investment and technology, the interdependencies between some of the metric risk driver categories, and the conflict between 'fatal accident rate' and 'accident rate' in the language of the Aviation Safety goal as stated in different sources.

Determination of Safety Performance Grade of NPP Using Integrated Safety Performance Assessment (ISPA) Program

International Nuclear Information System (INIS)

Chung, Dae Wook

2011-01-01

Since the beginning of 2000, the safety regulation of nuclear power plant (NPP) has been challenged to be conducted more reasonable, effective and efficient way using risk and performance information. In the United States, USNRC established Reactor Oversight Process (ROP) in 2000 for improving the effectiveness of safety regulation of operating NPPs. The main idea of ROP is to classify the NPPs into 5 categories based on the results of safety performance assessment and to conduct graded regulatory programs according to categorization, which might be interpreted as 'Graded Regulation'. However, the classification of safety performance categories is highly comprehensive and sensitive process so that safety performance assessment program should be prepared in integrated, objective and quantitative manner. Furthermore, the results of assessment should characterize and categorize the actual level of safety performance of specific NPP, integrating all the substantial elements for assessing the safety performance. In consideration of particular regulatory environment in Korea, the integrated safety performance assessment (ISPA) program is being under development for the use in the determination of safety performance grade (SPG) of a NPP. The ISPA program consists of 6 individual assessment programs (4 quantitative and 2 qualitative) which cover the overall safety performance of NPP. Some of the assessment programs which are already implemented are used directly or modified for incorporating risk aspects. The others which are not existing regulatory programs are newly developed. Eventually, all the assessment results from individual assessment programs are produced and integrated to determine the safety performance grade of a specific NPP

Pressure Safety Program Implementation at ORNL

Energy Technology Data Exchange (ETDEWEB)

Lower, Mark [ORNL; Etheridge, Tom [ORNL; Oland, C. Barry [XCEL Engineering, Inc.

2013-01-01

The Oak Ridge National Laboratory (ORNL) is a US Department of Energy (DOE) facility that is managed by UT-Battelle, LLC. In February 2006, DOE promulgated worker safety and health regulations to govern contractor activities at DOE sites. These regulations, which are provided in 10 CFR 851, Worker Safety and Health Program, establish requirements for worker safety and health program that reduce or prevent occupational injuries, illnesses, and accidental losses by providing DOE contractors and their workers with safe and healthful workplaces at DOE sites. The regulations state that contractors must achieve compliance no later than May 25, 2007. According to 10 CFR 851, Subpart C, Specific Program Requirements, contractors must have a structured approach to their worker safety and health programs that at a minimum includes provisions for pressure safety. In implementing the structured approach for pressure safety, contractors must establish safety policies and procedures to ensure that pressure systems are designed, fabricated, tested, inspected, maintained, repaired, and operated by trained, qualified personnel in accordance with applicable sound engineering principles. In addition, contractors must ensure that all pressure vessels, boilers, air receivers, and supporting piping systems conform to (1) applicable American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (2004) Sections I through XII, including applicable code cases; (2) applicable ASME B31 piping codes; and (3) the strictest applicable state and local codes. When national consensus codes are not applicable because of pressure range, vessel geometry, use of special materials, etc., contractors must implement measures to provide equivalent protection and ensure a level of safety greater than or equal to the level of protection afforded by the ASME or applicable state or local codes. This report documents the work performed to address legacy pressure vessel deficiencies and comply

WE-H-BRB-00: Big Data in Radiation Oncology

Energy Technology Data Exchange (ETDEWEB)

NONE

2016-06-15

Big Data in Radiation Oncology: (1) Overview of the NIH 2015 Big Data Workshop, (2) Where do we stand in the applications of big data in radiation oncology?, and (3) Learning Health Systems for Radiation Oncology: Needs and Challenges for Future Success The overriding goal of this trio panel of presentations is to improve awareness of the wide ranging opportunities for big data impact on patient quality care and enhancing potential for research and collaboration opportunities with NIH and a host of new big data initiatives. This presentation will also summarize the Big Data workshop that was held at the NIH Campus on August 13–14, 2015 and sponsored by AAPM, ASTRO, and NIH. The workshop included discussion of current Big Data cancer registry initiatives, safety and incident reporting systems, and other strategies that will have the greatest impact on radiation oncology research, quality assurance, safety, and outcomes analysis. Learning Objectives: To discuss current and future sources of big data for use in radiation oncology research To optimize our current data collection by adopting new strategies from outside radiation oncology To determine what new knowledge big data can provide for clinical decision support for personalized medicine L. Xing, NIH/NCI Google Inc.

WE-H-BRB-00: Big Data in Radiation Oncology

International Nuclear Information System (INIS)

2016-01-01

Big Data in Radiation Oncology: (1) Overview of the NIH 2015 Big Data Workshop, (2) Where do we stand in the applications of big data in radiation oncology?, and (3) Learning Health Systems for Radiation Oncology: Needs and Challenges for Future Success The overriding goal of this trio panel of presentations is to improve awareness of the wide ranging opportunities for big data impact on patient quality care and enhancing potential for research and collaboration opportunities with NIH and a host of new big data initiatives. This presentation will also summarize the Big Data workshop that was held at the NIH Campus on August 13–14, 2015 and sponsored by AAPM, ASTRO, and NIH. The workshop included discussion of current Big Data cancer registry initiatives, safety and incident reporting systems, and other strategies that will have the greatest impact on radiation oncology research, quality assurance, safety, and outcomes analysis. Learning Objectives: To discuss current and future sources of big data for use in radiation oncology research To optimize our current data collection by adopting new strategies from outside radiation oncology To determine what new knowledge big data can provide for clinical decision support for personalized medicine L. Xing, NIH/NCI Google Inc.

Traffic information computing platform for big data

Energy Technology Data Exchange (ETDEWEB)

Duan, Zongtao, E-mail: ztduan@chd.edu.cn; Li, Ying, E-mail: ztduan@chd.edu.cn; Zheng, Xibin, E-mail: ztduan@chd.edu.cn; Liu, Yan, E-mail: ztduan@chd.edu.cn; Dai, Jiting, E-mail: ztduan@chd.edu.cn; Kang, Jun, E-mail: ztduan@chd.edu.cn [Chang' an University School of Information Engineering, Xi' an, China and Shaanxi Engineering and Technical Research Center for Road and Traffic Detection, Xi' an (China)

2014-10-06

Big data environment create data conditions for improving the quality of traffic information service. The target of this article is to construct a traffic information computing platform for big data environment. Through in-depth analysis the connotation and technology characteristics of big data and traffic information service, a distributed traffic atomic information computing platform architecture is proposed. Under the big data environment, this type of traffic atomic information computing architecture helps to guarantee the traffic safety and efficient operation, more intelligent and personalized traffic information service can be used for the traffic information users.

Traffic information computing platform for big data

International Nuclear Information System (INIS)

Duan, Zongtao; Li, Ying; Zheng, Xibin; Liu, Yan; Dai, Jiting; Kang, Jun

2014-01-01

Big data environment create data conditions for improving the quality of traffic information service. The target of this article is to construct a traffic information computing platform for big data environment. Through in-depth analysis the connotation and technology characteristics of big data and traffic information service, a distributed traffic atomic information computing platform architecture is proposed. Under the big data environment, this type of traffic atomic information computing architecture helps to guarantee the traffic safety and efficient operation, more intelligent and personalized traffic information service can be used for the traffic information users

National Ignition Facility Project Site Safety Program

International Nuclear Information System (INIS)

Dun, C

2003-01-01

This Safety Program for the National Ignition Facility (NIF) presents safety protocols and requirements that management and workers shall follow to assure a safe and healthful work environment during activities performed on the NIF Project site. The NIF Project Site Safety Program (NPSSP) requires that activities at the NIF Project site be performed in accordance with the ''LLNL ES and H Manual'' and the augmented set of controls and processes described in this NIF Project Site Safety Program. Specifically, this document: (1) Defines the fundamental NIF site safety philosophy. (2) Defines the areas covered by this safety program (see Appendix B). (3) Identifies management roles and responsibilities. (4) Defines core safety management processes. (5) Identifies NIF site-specific safety requirements. This NPSSP sets forth the responsibilities, requirements, rules, policies, and regulations for workers involved in work activities performed on the NIF Project site. Workers are required to implement measures to create a universal awareness that promotes safe practice at the work site and will achieve NIF management objectives in preventing accidents and illnesses. ES and H requirements are consistent with the ''LLNL ES and H Manual''. This NPSSP and implementing procedures (e.g., Management Walkabout, special work procedures, etc.,) are a comprehensive safety program that applies to NIF workers on the NIF Project site. The NIF Project site includes the B581/B681 site and support areas shown in Appendix B

Fusion safety program Annual report, Fiscal year 1995

International Nuclear Information System (INIS)

Longhurst, G.R.; Cadwallader, L.C.; Carmack, W.J.

1995-12-01

This report summarizes the major activities of the Fusion Safety Program in FY-95. The Idaho National Engineering Laboratory (INEL) is the designated lead laboratory, and Lockheed Idaho Technologies Company is the prime contractor for this program. The Fusion Safety Program was initiated in 1979. Activities are conducted at the INEL, at other DOE laboratories, and at other institutions. Among the technical areas covered in this report are tritium safety, beryllium safety, chemical reactions and activation product release, safety aspects of fusion magnet systems, plasma disruptions, risk assessment failure rate database development, and safety code development and application to fusion safety issues. Most of this work has been done in support of the International Thermonuclear Experimental Reactor (ITER). Also included in the report are summaries of the safety and environmental studies performed by the Fusion Safety Program for the Tokamak Physics Experiment and the Tokamak Fusion Test Reactor and the technical support for commercial fusion facility conceptual design studies. A final activity described is work to develop DOE Technical Standards for Safety of Fusion Test Facilities

Gap Analysis Approach for Construction Safety Program Improvement

Directory of Open Access Journals (Sweden)

Thanet Aksorn

2007-06-01

Full Text Available To improve construction site safety, emphasis has been placed on the implementation of safety programs. In order to successfully gain from safety programs, factors that affect their improvement need to be studied. Sixteen critical success factors of safety programs were identified from safety literature, and these were validated by safety experts. This study was undertaken by surveying 70 respondents from medium- and large-scale construction projects. It explored the importance and the actual status of critical success factors (CSFs. Gap analysis was used to examine the differences between the importance of these CSFs and their actual status. This study found that the most critical problems characterized by the largest gaps were management support, appropriate supervision, sufficient resource allocation, teamwork, and effective enforcement. Raising these priority factors to satisfactory levels would lead to successful safety programs, thereby minimizing accidents.

Health, safety and environmental research program

International Nuclear Information System (INIS)

Dinner, P.J.

1983-01-01

This report outlines the Health, Safety and Environmental Research Program being undertaken by the CFFTP. The Program objectives, relationship to other CFFTP programs, implementation plans and expected outputs are stated. Opportunities to build upon the knowledge and experience gained in safely managing tritium in the CANDU program, by addressing generic questions pertinent to tritium safety for fusion facilities, are identified. These opportunities exist across a broad spectrum of issues covering the anticipated behaviour of tritium in fusion facilities, the surrounding environment and in man

Seismic safety margins research program overview

International Nuclear Information System (INIS)

Tokarz, F.J.; Smith, P.D.

1978-01-01

A multiyear seismic research program has been initiated at the Lawrence Livermore Laboratory. This program, the Seismic Safety Margins Research Program (SSMRP) is funded by the U.S. Nuclear Regulatory Commission, Office of Nuclear Regulatory Research. The program is designed to develop a probabilistic systems methodology for determining the seismic safety margins of nuclear power plants. Phase I, extending some 22 months, began in July 1978 at a funding level of approximately $4.3 million. Here we present an overview of the SSMRP. Included are discussions on the program objective, the approach to meet the program goal and objectives, end products, the probabilistic systems methodology, and planned activities for Phase I

Nuclear Criticality Safety Department Qualification Program

International Nuclear Information System (INIS)

Carroll, K.J.; Taylor, R.G.; Worley, C.A.

1996-01-01

The Nuclear Criticality Safety Department (NCSD) is committed to developing and maintaining a staff of highly qualified personnel to meet the current and anticipated needs in Nuclear Criticality Safety (NCS) at the Oak Ridge Y-12 Plant. This document defines the Qualification Program to address the NCSD technical and managerial qualification as required by the Y-1 2 Training Implementation Matrix (TIM). This Qualification Program is in compliance with DOE Order 5480.20A and applicable Lockheed Martin Energy Systems, Inc. (LMES) and Y-1 2 Plant procedures. It is implemented through a combination of WES plant-wide training courses and professional nuclear criticality safety training provided within the department. This document supersedes Y/DD-694, Revision 2, 2/27/96, Qualification Program, Nuclear Criticality Safety Department There are no backfit requirements associated with revisions to this document

National HTGR safety program

International Nuclear Information System (INIS)

Davis, D.E.; Kelley, A.P. Jr.

1982-01-01

This paper presents an overview of the National HTGR Program in the US with emphasis on the safety and licensing strategy being pursued. This strategy centers upon the development of an integrated approach to organizing and classifying the functions needed to produce safe and economical nuclear power production. At the highest level, four plant goals are defined - Normal Operation, Core and Plant Protection, Containment Integrity and Emergency Preparedness. The HTGR features which support the attainment of each goal are described and finally a brief summary is provided of the current status of the principal safety development program supporting the validation of the four plant goals

BigDansing

KAUST Repository

Khayyat, Zuhair

2015-06-02

Data cleansing approaches have usually focused on detecting and fixing errors with little attention to scaling to big datasets. This presents a serious impediment since data cleansing often involves costly computations such as enumerating pairs of tuples, handling inequality joins, and dealing with user-defined functions. In this paper, we present BigDansing, a Big Data Cleansing system to tackle efficiency, scalability, and ease-of-use issues in data cleansing. The system can run on top of most common general purpose data processing platforms, ranging from DBMSs to MapReduce-like frameworks. A user-friendly programming interface allows users to express data quality rules both declaratively and procedurally, with no requirement of being aware of the underlying distributed platform. BigDansing takes these rules into a series of transformations that enable distributed computations and several optimizations, such as shared scans and specialized joins operators. Experimental results on both synthetic and real datasets show that BigDansing outperforms existing baseline systems up to more than two orders of magnitude without sacrificing the quality provided by the repair algorithms.

Big data analytics to improve cardiovascular care: promise and challenges.

Science.gov (United States)

Rumsfeld, John S; Joynt, Karen E; Maddox, Thomas M

2016-06-01

The potential for big data analytics to improve cardiovascular quality of care and patient outcomes is tremendous. However, the application of big data in health care is at a nascent stage, and the evidence to date demonstrating that big data analytics will improve care and outcomes is scant. This Review provides an overview of the data sources and methods that comprise big data analytics, and describes eight areas of application of big data analytics to improve cardiovascular care, including predictive modelling for risk and resource use, population management, drug and medical device safety surveillance, disease and treatment heterogeneity, precision medicine and clinical decision support, quality of care and performance measurement, and public health and research applications. We also delineate the important challenges for big data applications in cardiovascular care, including the need for evidence of effectiveness and safety, the methodological issues such as data quality and validation, and the critical importance of clinical integration and proof of clinical utility. If big data analytics are shown to improve quality of care and patient outcomes, and can be successfully implemented in cardiovascular practice, big data will fulfil its potential as an important component of a learning health-care system.

Effective safety training program design

International Nuclear Information System (INIS)

Chilton, D.A.; Lombardo, G.J.; Pater, R.F.

1991-01-01

Changes in the oil industry require new strategies to reduce costs and retain valuable employees. Training is a potentially powerful tool for changing the culture of an organization, resulting in improved safety awareness, lower-risk behaviors and ultimately, statistical improvements. Too often, safety training falters, especially when applied to pervasive, long-standing problems. Stepping, Handling and Lifting injuries (SHL) more commonly known as back injuries and slips, trips and falls have plagued mankind throughout the ages. They are also a major problem throughout the petroleum industry. Although not as widely publicized as other immediately-fatal accidents, injuries from stepping, materials handling, and lifting are among the leading causes of employee suffering, lost time and diminished productivity throughout the industry. Traditional approaches have not turned the tide of these widespread injuries. a systematic safety training program, developed by Anadrill Schlumberger with the input of new training technology, has the potential to simultaneously reduce costs, preserve employee safety, and increase morale. This paper: reviews the components of an example safety training program, and illustrates how a systematic approach to safety training can make a positive impact on Stepping, Handling and Lifting injuries

The Department of Energy nuclear criticality safety program

International Nuclear Information System (INIS)

Felty, J.R.

2004-01-01

This paper broadly covers key events and activities from which the Department of Energy Nuclear Criticality Safety Program (NCSP) evolved. The NCSP maintains fundamental infrastructure that supports operational criticality safety programs. This infrastructure includes continued development and maintenance of key calculational tools, differential and integral data measurements, benchmark compilation, development of training resources, hands-on training, and web-based systems to enhance information preservation and dissemination. The NCSP was initiated in response to Defense Nuclear Facilities Safety Board Recommendation 97-2, Criticality Safety, and evolved from a predecessor program, the Nuclear Criticality Predictability Program, that was initiated in response to Defense Nuclear Facilities Safety Board Recommendation 93-2, The Need for Critical Experiment Capability. This paper also discusses the role Dr. Sol Pearlstein played in helping the Department of Energy lay the foundation for a robust and enduring criticality safety infrastructure.

DOE Defense Program (DP) safety programs. Final report, Task 003

International Nuclear Information System (INIS)

1998-01-01

The overall objective of the work on Task 003 of Subcontract 9-X52-W7423-1 was to provide LANL with support to the DOE Defense Program (DP) Safety Programs. The effort included the identification of appropriate safety requirements, the refinement of a DP-specific Safety Analysis Report (SAR) Format and Content Guide (FCG) and Comprehensive Review Plan (CRP), incorporation of graded approach instructions into the guidance, and the development of a safety analysis methodologies document. All tasks which were assigned under this Task Order were completed. Descriptions of the objectives of each task and effort performed to complete each objective is provided here

Safety program considerations for space nuclear reactor systems

International Nuclear Information System (INIS)

Cropp, L.O.

1984-08-01

This report discusses the necessity for in-depth safety program planning for space nuclear reactor systems. The objectives of the safety program and a proposed task structure is presented for meeting those objectives. A proposed working relationship between the design and independent safety groups is suggested. Examples of safety-related design philosophies are given

Fusion Safety Program annual report, fiscal year 1994

International Nuclear Information System (INIS)

Longhurst, G.R.; Cadwallader, L.C.; Dolan, T.J.; Herring, J.S.; McCarthy, K.A.; Merrill, B.J.; Motloch, C.G.; Petti, D.A.

1995-03-01

This report summarizes the major activities of the Fusion Safety Program in fiscal year 1994. The Idaho National Engineering Laboratory (INEL) is the designated lead laboratory and Lockheed Idaho Technologies Company is the prime contractor for this program. The Fusion Safety Program was initiated in 1979. Activities are conducted at the INEL, at other DOE laboratories, and at other institutions, including the University of Wisconsin. The technical areas covered in this report include tritium safety, beryllium safety, chemical reactions and activation product release, safety aspects of fusion magnet systems, plasma disruptions, risk assessment failure rate data base development, and thermalhydraulics code development and their application to fusion safety issues. Much of this work has been done in support of the International Thermonuclear Experimental Reactor (ITER). Also included in the report are summaries of the safety and environmental studies performed by the Fusion Safety Program for the Tokamak Physics Experiment and the Tokamak Fusion Test Reactor and of the technical support for commercial fusion facility conceptual design studies. A major activity this year has been work to develop a DOE Technical Standard for the safety of fusion test facilities

USNRC HTGR safety research program overview

International Nuclear Information System (INIS)

Foulds, R.B.

1982-01-01

An overview is given of current activities and planned research efforts of the US Nuclear Regulatory Commission (NRC) HTGR Safety Program. On-going research at Brookhaven National Laboratory, Oak Ridge National Laboratory, Los Alamos National Laboratory, and Pacific Northwest Laboratory are outlined. Tables include: HTGR Safety Issues, Program Tasks, HTGR Computer Code Library, and Milestones for Long Range Research Plan

ATLAS program for advanced thermal-hydraulic safety research

International Nuclear Information System (INIS)

Song, Chul-Hwa; Choi, Ki-Yong; Kang, Kyoung-Ho

2015-01-01

Highlights: • Major achievements of the ATLAS program are highlighted in conjunction with both developing advanced light water reactor technologies and enhancing the nuclear safety. • The ATLAS data was shown to be useful for the development and licensing of new reactors and safety analysis codes, and also for nuclear safety enhancement through domestic and international cooperative programs. • A future plan for the ATLAS testing is introduced, covering recently emerging safety issues and some generic thermal-hydraulic concerns. - Abstract: This paper highlights the major achievements of the ATLAS program, which is an integral effect test program for both developing advanced light water reactor technologies and contributing to enhancing nuclear safety. The ATLAS program is closely related with the development of the APR1400 and APR"+ reactors, and the SPACE code, which is a best-estimate system-scale code for a safety analysis of nuclear reactors. The multiple roles of ATLAS testing are emphasized in very close conjunction with the development, licensing, and commercial deployment of these reactors and their safety analysis codes. The role of ATLAS for nuclear safety enhancement is also introduced by taking some examples of its contributions to voluntarily lead to multi-body cooperative programs such as domestic and international standard problems. Finally, a future plan for the utilization of ATLAS testing is introduced, which aims at tackling recently emerging safety issues such as a prolonged station blackout accident and medium-size break LOCA, and some generic thermal-hydraulic concerns as to how to figure out multi-dimensional phenomena and the scaling issue.

Implementation of radiation safety program in a medical institution

International Nuclear Information System (INIS)

Palanca, Elena D.

1999-01-01

A medical institution that utilizes radiation for the diagnosis and treatment of diseases of malignancies develops and implements a radiation safety program to keep occupational exposures of radiation workers and exposures of non-radiation workers and the public to the achievable and a more achievable minimum, to optimize the use of radiation, and to prevent misadministration. The hospital radiation safety program is established by a core medical radiation committee composed of trained radiation safety officers and head of authorized users of radioactive materials and radiation machines from the different departments. The radiation safety program sets up procedural guidelines of the safe use of radioactive material and of radiation equipment. It offers regular training to radiation workers and radiation safety awareness courses to hospital staff. The program has a comprehensive radiation safety information system or radsis that circularizes the radiation safety program in the hospital. The radsis keeps the drafted and updated records of safety guides and policies, radioactive material and equipment inventory, personnel dosimetry reports, administrative, regulatory and licensing activity document, laboratory procedures, emergency procedures, quality assurance and quality control program process, physics and dosimetry procedures and reports, personnel and hospital staff training program. The medical radiation protection committee is tasked to oversee the actual implementation of the radiation safety guidelines in the different radiation facilities in the hospital, to review personnel exposures, incident reports and ALARA actions, operating procedures, facility inspections and audit reports, to evaluate the existing radiation safety procedures, to make necessary changes to these procedures, and make modifications of course content of the training program. The effective implementation of the radiation safety program provides increased confidence that the physician and

The radiation safety self-assessment program of Ontario Hydro

International Nuclear Information System (INIS)

Armitage, G.; Chase, W.J.

1987-01-01

Ontario Hydro has developed a self-assessment program to ensure that high quality in its radiation safety program is maintained. The self-assessment program has three major components: routine ongoing assessment, accident/incident investigation, and detailed assessments of particular radiation safety subsystems or of the total radiation safety program. The operation of each of these components is described

Using Contemporary Leadership Skills in Medication Safety Programs.

Science.gov (United States)

Hertig, John B; Hultgren, Kyle E; Weber, Robert J

2016-04-01

The discipline of studying medication errors and implementing medication safety programs in hospitals dates to the 1970s. These initial programs to prevent errors focused only on pharmacy operation changes - and not the broad medication use system. In the late 1990s, research showed that faulty systems, and not faulty people, are responsible for errors and require a multidisciplinary approach. The 2013 ASHP Statement on the Role of the Medication Safety Leader recommended that medication safety leaders be integrated team members rather than a single point of contact. Successful medication safety programs must employ a new approach - one that embraces the skills of all health care team members and positions many leaders to improve safety. This approach requires a new set of leadership skills based on contemporary management principles, including followership, team-building, tracking and assessing progress, storytelling and communication, and cultivating innovation, all of which promote transformational change. The application of these skills in developing or changing a medication safety program is reviewed in this article.

Big Java late objects

CERN Document Server

Horstmann, Cay S

2012-01-01

Big Java: Late Objects is a comprehensive introduction to Java and computer programming, which focuses on the principles of programming, software engineering, and effective learning. It is designed for a two-semester first course in programming for computer science students.

Nursing Knowledge: Big Data Science-Implications for Nurse Leaders.

Science.gov (United States)

Westra, Bonnie L; Clancy, Thomas R; Sensmeier, Joyce; Warren, Judith J; Weaver, Charlotte; Delaney, Connie W

2015-01-01

The integration of Big Data from electronic health records and other information systems within and across health care enterprises provides an opportunity to develop actionable predictive models that can increase the confidence of nursing leaders' decisions to improve patient outcomes and safety and control costs. As health care shifts to the community, mobile health applications add to the Big Data available. There is an evolving national action plan that includes nursing data in Big Data science, spearheaded by the University of Minnesota School of Nursing. For the past 3 years, diverse stakeholders from practice, industry, education, research, and professional organizations have collaborated through the "Nursing Knowledge: Big Data Science" conferences to create and act on recommendations for inclusion of nursing data, integrated with patient-generated, interprofessional, and contextual data. It is critical for nursing leaders to understand the value of Big Data science and the ways to standardize data and workflow processes to take advantage of newer cutting edge analytics to support analytic methods to control costs and improve patient quality and safety.

Nuclear safety training program (NSTP) for dismantling

International Nuclear Information System (INIS)

Cretskens, Pieter; Lenie, Koen; Mulier, Guido

2014-01-01

European Control Services (GDF Suez) has developed and is still developing specific training programs for the dismantling and decontamination of nuclear installations. The main topic in these programs is nuclear safety culture. We therefore do not focus on technical training but on developing the right human behavior to work in a 'safety culture' environment. The vision and techniques behind these programs have already been tested in different environments: for example the dismantling of the BN MOX Plant in Dessel (Belgium), Nuclear Safety Culture Training for Electrabel NPP Doel..., but also in the non-nuclear industry. The expertise to do so was found in combining the know-how of the Training and the Nuclear Department of ECS. In training, ECS is one of the main providers of education in risky tasks, like elevation and manipulation of charges, working in confined spaces... but it does also develop training on demand to improve safety in a certain topic. Radiation Protection is the core business in the Nuclear Department with a presence on most of the nuclear sites in Belgium. Combining these two domains in a nuclear safety training program, NSTP, is an important stage in a dismantling project due to specific contamination, technical and other risks. It increases the level of safety and leads to a harmonization of different working cultures. The modular training program makes it possible to evaluate constantly as well as in group or individually. (authors)

Medication safety programs in primary care: a scoping review.

Science.gov (United States)

Khalil, Hanan; Shahid, Monica; Roughead, Libby

2017-10-01

Medication safety plays an essential role in all healthcare organizations; improving this area is paramount to quality and safety of any wider healthcare program. While several medication safety programs in the hospital setting have been described and the associated impact on patient safety evaluated, no systematic reviews have described the impact of medication safety programs in the primary care setting. A preliminary search of the literature demonstrated that no systematic reviews, meta-analysis or scoping reviews have reported on medication safety programs in primary care; instead they have focused on specific interventions such as medication reconciliation or computerized physician order entry. This scoping review sought to map the current medication safety programs used in primary care. The current scoping review sought to examine the characteristics of medication safety programs in the primary care setting and to map evidence on the outcome measures used to assess the effectiveness of medication safety programs in improving patient safety. The current review considered participants of any age and any condition using care obtained from any primary care services. We considered studies that focussed on the characteristics of medication safety programs and the outcome measures used to measure the effectiveness of these programs on patient safety in the primary care setting. The context of this review was primary care settings, primary healthcare organizations, general practitioner clinics, outpatient clinics and any other clinics that do not classify patients as inpatients. We considered all quantitative studied published in English. A three-step search strategy was utilized in this review. Data were extracted from the included studies to address the review question. The data extracted included type of medication safety program, author, country of origin, aims and purpose of the study, study population, method, comparator, context, main findings and outcome

Canadian hydrogen safety program

International Nuclear Information System (INIS)

MacIntyre, I.; Tchouvelev, A.V.; Hay, D.R.; Wong, J.; Grant, J.; Benard, P.

2007-01-01

The Canadian hydrogen safety program (CHSP) is a project initiative of the Codes and Standards Working Group of the Canadian transportation fuel cell alliance (CTFCA) that represents industry, academia, government, and regulators. The Program rationale, structure and contents contribute to acceptance of the products, services and systems of the Canadian Hydrogen Industry into the Canadian hydrogen stakeholder community. It facilitates trade through fair insurance policies and rates, effective and efficient regulatory approval procedures and accommodation of the interests of the general public. The Program integrates a consistent quantitative risk assessment methodology with experimental (destructive and non-destructive) failure rates and consequence-of-release data for key hydrogen components and systems into risk assessment of commercial application scenarios. Its current and past six projects include Intelligent Virtual Hydrogen Filling Station (IVHFS), Hydrogen clearance distances, comparative quantitative risk comparison of hydrogen and compressed natural gas (CNG) refuelling options; computational fluid dynamics (CFD) modeling validation, calibration and enhancement; enhancement of frequency and probability analysis, and Consequence analysis of key component failures of hydrogen systems; and fuel cell oxidant outlet hydrogen sensor project. The Program projects are tightly linked with the content of the International Energy Agency (IEA) Task 19 Hydrogen Safety. (author)

Big data in food safety; an overview

NARCIS (Netherlands)

Marvin, H.J.P.; Janssen, E.M.; Bouzembrak, Y.; Hendriksen, P.J.M.; Staats, M.

2017-01-01

Technology is now being developed that is able to handle vast amounts of structured and unstructured data from diverse sources and origins. These technologies are often referred to as big data, and opens new areas of research and applications that will have an increasing impact in all sectors of our

Big Data Knowledge in Global Health Education.

Science.gov (United States)

Olayinka, Olaniyi; Kekeh, Michele; Sheth-Chandra, Manasi; Akpinar-Elci, Muge

The ability to synthesize and analyze massive amounts of data is critical to the success of organizations, including those that involve global health. As countries become highly interconnected, increasing the risk for pandemics and outbreaks, the demand for big data is likely to increase. This requires a global health workforce that is trained in the effective use of big data. To assess implementation of big data training in global health, we conducted a pilot survey of members of the Consortium of Universities of Global Health. More than half the respondents did not have a big data training program at their institution. Additionally, the majority agreed that big data training programs will improve global health deliverables, among other favorable outcomes. Given the observed gap and benefits, global health educators may consider investing in big data training for students seeking a career in global health. Copyright © 2017 Icahn School of Medicine at Mount Sinai. Published by Elsevier Inc. All rights reserved.

Occupational Safety and Health Programs in Career Education.

Science.gov (United States)

DiCarlo, Robert D.; And Others

This resource guide was developed in response to the Occupational Safety and Health Act of 1970 and is intended to assist teachers in implementing courses in occupational safety and health as part of a career education program. The material is a synthesis of films, programed instruction, slides and narration, case studies, safety pamphlets,…

Sandia Laboratories environment and safety programs

International Nuclear Information System (INIS)

Zak, B.D.; McGrath, P.E.; Trauth, C.A. Jr.

1975-01-01

Sandia, one of ERDA's largest laboratories, is primarily known for its extensive work in the nuclear weapons field. In recent years, however, Sandia's role has expanded to embrace sizeable programs in the energy, resource recovery, and the environment and safety fields. In this latter area, Sandia has programs which address nuclear, fossil fuel, and general environment and safety issues. Here we survey ongoing activities and describe in more detail aa few projects of particular interest. These range from a study of the impact of sealed disposal of radioactive wastes, through reactor safety and fossil fuel plume chemistry, to investigations of the composition and dynamics of the stratosphere

OSHA Training Programs. Module SH-48. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on OSHA (Occupational Safety and Health Act) training programs is one of 50 modules concerned with job safety and health. This module provides a list of OSHA training requirements and describes OSHA training programs and other safety organizations' programs. Following the introduction, 11 objectives (each keyed to a page in the…

Fusion safety program annual report fiscal year 1997

International Nuclear Information System (INIS)

Longhurst, G.R.; Anderl, R.A.; Cadwallader, L.C.

1998-01-01

This report summarizes the major activities of the Fusion Safety Program in FY 1997. The Idaho National Engineering and Environmental Laboratory (INEEL) is the designated lead laboratory, and Lockheed Martin Idaho Technologies Company is the prime contractor for this program. The Fusion Safety Program was initiated in FY 1979 to perform research and develop data needed to ensure safety in fusion facilities. Activities include experiments, analysis, code development and application, and other forms of research. These activities are conducted at the INEEL, different DOE laboratories, and other institutions. The technical areas covered in this report include chemical reactions and activation product release, tritium safety, risk assessment failure rate database development, and safety code development and application to fusion safety issues. Most of this work has been done in support of the International Thermonuclear Experimental Reactor (ITER) project. Work done for ITER this year has focused on developing the needed information for the Non-site Specific Safety Report (NSSR-2)

Fusion safety program annual report fiscal year 1997

Energy Technology Data Exchange (ETDEWEB)

Longhurst, G.R.; Anderl, R.A.; Cadwallader, L.C. [and others

1998-01-01

This report summarizes the major activities of the Fusion Safety Program in FY 1997. The Idaho National Engineering and Environmental Laboratory (INEEL) is the designated lead laboratory, and Lockheed Martin Idaho Technologies Company is the prime contractor for this program. The Fusion Safety Program was initiated in FY 1979 to perform research and develop data needed to ensure safety in fusion facilities. Activities include experiments, analysis, code development and application, and other forms of research. These activities are conducted at the INEEL, different DOE laboratories, and other institutions. The technical areas covered in this report include chemical reactions and activation product release, tritium safety, risk assessment failure rate database development, and safety code development and application to fusion safety issues. Most of this work has been done in support of the International Thermonuclear Experimental Reactor (ITER) project. Work done for ITER this year has focused on developing the needed information for the Non-site Specific Safety Report (NSSR-2).

Fusion Safety Program Annual Report, Fiscal Year 1996

International Nuclear Information System (INIS)

Longhurst, G.R.; Anderl, R.A.; Cadwallader, L.C.

1996-12-01

This report summarizes the major activities of the Fusion Safety Program in FY 1996. The Idaho National Engineering Laboratory (INEL) is the designated lead laboratory, and Lockheed Martin Idaho Technologies Company is the prime contractor for this program. The Fusion Safety Program was initiated in 1979. The objective is to perform research and develop data needed to ensure safety in fusion facilities. Activities include experiments, analysis, code development and application, and other forms of research. These activities are conducted at the INEL, at other DOE laboratories, and at other institutions. Among the technical areas covered in this report are tritium safety, chemical reactions and activation product release, risk assessment failure rate database development, and safety code development and application to fusion safety issues. Most of this work has been done in support of the International Thermonuclear Experimental Reactor (ITER). Work done for ITER this year has focused on developing the needed information for the Non- Site- Specific Safety Report (NSSR-1). A final area of activity described is development of the new DOE Technical Standards for Safety of Magnetic Fusion Facilities

78 FR 43091 - Technical Operations Safety Action Program (T-SAP) and Air Traffic Safety Action Program (ATSAP)

Science.gov (United States)

2013-07-19

... Administration 14 CFR Part 193 [Docket No.: FAA-2013-0375] Technical Operations Safety Action Program (T-SAP) and... Disclosure. SUMMARY: The FAA is proposing that safety information provided to it under the T-SAP, established... to the FAA under the T-SAP and ATSAP, so the FAA can learn about and address aviation safety hazards...

75 FR 15484 - Railroad Safety Technology Program Grant Program

Science.gov (United States)

2010-03-29

... governments for projects that have a public benefit of improved railroad safety and efficiency. The program... State and local governments for projects * * * that have a public benefit of improved safety and network... minimum 20 percent grantee cost share (cash or in-kind) match requirement. DATES: FRA will begin accepting...

The ethics of biomedical big data

CERN Document Server

Mittelstadt, Brent Daniel

2016-01-01

This book presents cutting edge research on the new ethical challenges posed by biomedical Big Data technologies and practices. ‘Biomedical Big Data’ refers to the analysis of aggregated, very large datasets to improve medical knowledge and clinical care. The book describes the ethical problems posed by aggregation of biomedical datasets and re-use/re-purposing of data, in areas such as privacy, consent, professionalism, power relationships, and ethical governance of Big Data platforms. Approaches and methods are discussed that can be used to address these problems to achieve the appropriate balance between the social goods of biomedical Big Data research and the safety and privacy of individuals. Seventeen original contributions analyse the ethical, social and related policy implications of the analysis and curation of biomedical Big Data, written by leading experts in the areas of biomedical research, medical and technology ethics, privacy, governance and data protection. The book advances our understan...

Fast reactor safety program. Progress report, January-March 1980

International Nuclear Information System (INIS)

1980-05-01

The goal of the DOE LMFBR Safety Program is to provide a technology base fully responsive to safety considerations in the design, evaluation, licensing, and economic optimization of LMFBRs for electrical power generation. A strategy is presented that divides safety technology development into seven program elements, which have been used as the basis for the Work Breakdown Structure (WBS) for the Program. These elements include four lines of assurance (LOAs) involving core-related safety considerations, an element supporting non-core-related plant safety considerations, a safety R and D integration element, and an element for the development of test facilities and equipment to be used in Program experiments: LOA-1 (prevent accidents); LOA-2 (limit core damage); LOA-3 (maintain containment integrity); LOA-4 (attenuate radiological consequences); plant considerations; R and D integration; and facility development

Research program on regulatory safety research

International Nuclear Information System (INIS)

Mailaender, R.

2010-02-01

This paper elaborated for the Swiss Federal Office of Energy (SFOE) presents the synthesis report for 2009 made by the SFOE's program leader on the research program concerning regulatory nuclear safety research, as co-ordinated by the Swiss Nuclear Safety Inspectorate ENSI. Work carried out in various areas is reviewed, including that done on reactor safety, radiation protection and waste disposal as well as human aspects, organisation and safety culture. Work done concerning materials, pressure vessel integrity, transient analysis, the analysis of serious accidents in light-water reactors, fuel and material behaviour, melt cooling and concrete interaction is presented. OECD data bank topics are discussed. Transport and waste disposal research at the Mont Terri rock laboratory is looked at. Requirements placed on the personnel employed in nuclear power stations are examined and national and international co-operation is reviewed

High-heat tank safety issue resolution program plan

International Nuclear Information System (INIS)

Wang, O.S.

1993-12-01

The purpose of this program plan is to provide a guide for selecting corrective actions that will mitigate and/or remediate the high-heat waste tank safety issue for single-shell tank (SST) 241-C-106. This program plan also outlines the logic for selecting approaches and tasks to mitigate and resolve the high-heat safety issue. The identified safety issue for high-heat tank 241-C-106 involves the potential release of nuclear waste to the environment as the result of heat-induced structural damage to the tank's concrete, if forced cooling is interrupted for extended periods. Currently, forced ventilation with added water to promote thermal conductivity and evaporation cooling is used to cool the waste. At this time, the only viable solution identified to resolve this safety issue is the removal of heat generating waste in the tank. This solution is being aggressively pursued as the permanent solution to this safety issue and also to support the present waste retrieval plan. Tank 241-C-106 has been selected as the first SST for retrieval. The program plan has three parts. The first part establishes program objectives and defines safety issues, drivers, and resolution criteria and strategy. The second part evaluates the high-heat safety issue and its mitigation and remediation methods and alternatives according to resolution logic. The third part identifies major tasks and alternatives for mitigation and resolution of the safety issue. Selected tasks and best-estimate schedules are also summarized in the program plan

IRSN research programs concerning reactor safety

International Nuclear Information System (INIS)

Bardelay, J.

2005-01-01

This paper is made up of 3 parts. The first part briefly presents the missions of IRSN (French research institute on nuclear safety), the second part reviews the research works currently led by IRSN in the following fields : -) the assessment of safety computer codes, -) thermohydraulics, -) reactor ageing, -) reactivity accidents, -) loss of coolant, -) reactor pool dewatering, -) core meltdown, -) vapor explosion, and -) fission product release. In the third part, IRSN is shown to give a major importance to experimental programs led on research or test reactors for collecting valid data because of the complexity of the physical processes that are involved. IRSN plans to develop a research program concerning the safety of high or very high temperature reactors. (A.C.)

A Computer Program for Assessing Nuclear Safety Culture Impact

Energy Technology Data Exchange (ETDEWEB)

Han, Kiyoon; Jae, Moosung [Hanyang Univ., Seoul (Korea, Republic of)

2014-10-15

Through several accidents of NPP including the Fukushima Daiichi in 2011 and Chernobyl accidents in 1986, a lack of safety culture was pointed out as one of the root cause of these accidents. Due to its latent influences on safety performance, safety culture has become an important issue in safety researches. Most of the researches describe how to evaluate the state of the safety culture of the organization. However, they did not include a possibility that the accident occurs due to the lack of safety culture. Because of that, a methodology for evaluating the impact of the safety culture on NPP's safety is required. In this study, the methodology for assessing safety culture impact is suggested and a computer program is developed for its application. SCII model which is the new methodology for assessing safety culture impact quantitatively by using PSA model. The computer program is developed for its application. This program visualizes the SCIs and the SCIIs. It might contribute to comparing the level of the safety culture among NPPs as well as improving the management safety of NPP.

Nuclear criticality safety program at the Fuel Cycle Facility

International Nuclear Information System (INIS)

Lell, R.M.; Fujita, E.K.; Tracy, D.B.; Klann, R.T.; Imel, G.R.; Benedict, R.W.; Rigg, R.H.

1994-01-01

The Fuel Cycle Facility (FCF) is designed to demonstrate the feasibility of a novel commercial-scale remote pyrometallurgical process for metallic fuels from liquid metal-cooled reactors and to show closure of the Integral Fast Reactor (IFR) fuel cycle. Requirements for nuclear criticality safety impose the most restrictive of the various constraints on the operation of FCF. The upper limits on batch sizes and other important process parameters are determined principally by criticality safety considerations. To maintain an efficient operation within appropriate safety limits, it is necessary to formulate a nuclear criticality safety program that integrates equipment design, process development, process modeling, conduct of operations, a measurement program, adequate material control procedures, and nuclear criticality analysis. The nuclear criticality safety program for FCF reflects this integration, ensuring that the facility can be operated efficiently without compromising safety. The experience gained from the conduct of this program in the Fuel cycle Facility will be used to design and safely operate IFR facilities on a commercial scale. The key features of the nuclear criticality safety program are described. The relationship of these features to normal facility operation is also described

Research notes : are safety corridors really safe? Evaluation of the corridor safety improvement program.

Science.gov (United States)

1998-08-26

High accident frequencies on Oregons highway corridors are of concern to the Oregon Department of Transportation (ODOT). : ODOT adopted the Corridor Safety Improvement Program as part of an overall program of safety improvements using federal and ...

Summary of NRC LWR safety research programs on fuel behavior, metallurgy/materials and operational safety

International Nuclear Information System (INIS)

Bennett, G.L.

1979-09-01

The NRC light-water reactor safety-research program is part of the NRC regulatory program for ensuring the safety of nuclear power plants. This paper summarizes the results of NRC-sponsored research into fuel behavior, metallurgy and materials, and operational safety. The fuel behavior research program provides a detailed understanding of the response of nuclear fuel assemblies to postulated off-normal or accident conditions. Fuel behavior research includes studies of basic fuel rod properties, in-reactor tests, computer code development, fission product release and fuel meltdown. The metallurgy and materials research program provides independent confirmation of the safe design of reactor vessels and piping. This program includes studies on fracture mechanics, irradiation embrittlement, stress corrosion, crack growth, and nondestructive examination. The operational safety research provides direct assistance to NRC officials concerned with the operational and operational-safety aspects of nuclear power plants. The topics currently being addressed include qualification testing evaluation, fire protection, human factors, and noise diagnostics

AEC sets five year nuclear safety research program

International Nuclear Information System (INIS)

Anon.

1976-01-01

The research by the government for the establishment of means of judging the adequacy of safety measures incorporated in nuclear facilities, including setting safety standards and collecting documents of general criteria, and the research by the industry on safety measures and the promotion of safety-related technique are stated in the five year program for 1976-80 reported by subcommittees, Atomic Energy Commission (AEC). Four considerations on the research items incorporated in the program are 1) technical programs relating to the safety of nuclear facilities and the necessary criteria, 2) priority of the relevant items decided according to their impact on circumstances, urgency, the defence-indepth concept and so on, 3) consideration of all relevant data and documents collected, and research subjects necessary to quantify safety measurement, and 4) consideration of technological actualization, the capability of each research body, the budget and the time schedule. In addition, seven major themes decided on the basis of these points are 1) reactivity-initiated accident, 2) LOCA, 3) fuel behavior, 4) structural safety, 5) radioactive release, 6) statistical method of safety evaluation, and 7) seismic characteristics. The committee has deliberated the appropriate division of researches between the government and the industry. A set of tables showing the nuclear safety research plan for 1976-80 are attached. (Iwakiri, K.)

Directory of Academic Programs in Occupational Safety and Health.

Science.gov (United States)

Weis, William J., III; And Others

This booklet describes academic program offerings in American colleges and universities in the area of occupational safety and health. Programs are divided into five major categories, corresponding to each of the core disciplines: (1) occupational safety and health/industrial hygiene, (2) occupational safety, (3) industrial hygiene, (4)…

OPG waterways public safety program

Energy Technology Data Exchange (ETDEWEB)

Bennett, T [Ontario Power Generation Inc., Niagara Falls, ON (Canada)

2009-07-01

Ontario Power Generation (OPG) has 64 hydroelectric generating stations, 241 dams, and 109 dams in Ontario's registry with the International Commission on Large Dams (ICOLD). In 1986, it launched a formal dam safety program. This presentation addressed the importance of public safety around dams. The safety measures are timely because of increasing public interaction around dams; the public's unawareness of hazards; public interest in extreme sports; easier access by recreational vehicles; the perceived right of public to access sites; and the remote operation of hydroelectric stations. The presentation outlined the OPG managed system approach, with particular reference to governance; principles; standards and procedures; and aspects of implementation. Specific guidelines and governing documents for public safety around dams were identified, including guidelines for public safety of waterways; booms and buoys; audible warning devices and lights; public safety signage; fencing and barricades; and risk assessment for public safety around waterways. The presentation concluded with a discussion of audits and management reviews to determine if safety objectives and targets have been met. figs.

Fundamentals of a patient safety program

International Nuclear Information System (INIS)

Frush, Karen S.

2008-01-01

Thousands of people are injured or die from medical errors and adverse events each year, despite being cared for by hard-working, intelligent and well-intended health care professionals, working in the highly complex and high-risk environment of the American health care system. Patient safety leaders have described a need for health care organizations to make error prevention a major strategic objective while at the same time recognizing the importance of transforming the traditional health care culture. In response, comprehensive patient safety programs have been developed with the aim of reducing medical errors and adverse events and acting as a catalyst in the development of a culture of safety. Components of these programs are described, with an emphasis on strategies to improve pediatric patient safety. Physicians, as leaders of the health care team, have a unique opportunity to foster the culture and commitment required to address the underlying systems causes of medical error and harm. (orig.)

Fusion Safety Program annual report, fiscal year 1992

International Nuclear Information System (INIS)

Holland, D.F.; Cadwallader, L.C.; Herring, J.S.; Longhurst, G.R.; McCarthy, K.A.; Merrill, B.J.; Piet, S.J.

1993-01-01

This report summarizes the major activities of the Fusion Safety Program in fiscal year 1992. The Idaho National Engineering Laboratory (INEL) is the designated lead laboratory and EG ampersand G Idaho, Inc. is the prime contractor for this program. The Fusion Safety Program was initiated in 1979. Activities are conducted at the INEL and in participating organizations including the Westinghouse Hanford Company at the Hanford Engineering Development Laboratory, the Massachusetts Institute of Technology, and the University of Wisconsin. The technical areas covered in the report include tritium safety, activation product release, reactions involving beryllium, reactions involving lithium breeding materials, safety of fusion magnet systems, plasma disruptions, risk assessment failure rate data base, and computer code development for reactor transients. Also included in the report is a summary of the safety and environmental studies performed by the INEL for the Tokamak Physics Experiments and the Tokamak Fusion Test Reactor, the safety analysis for the International Thermonuclear Experimental Reactor design, and the technical support for the ARIES commercial reactor design study

49 CFR 659.19 - System safety program plan: contents.

Science.gov (United States)

2010-10-01

... implementation of the system safety program. (j) A description of the process used by the rail transit agency to... the rail transit agency to manage safety issues. (d) The process used to control changes to the system... hazard management program. (n) A description of the process used for facilities and equipment safety...

India's power program and its concern over environmental safety

International Nuclear Information System (INIS)

Prasad, G.E.; Mittra, J.

2001-01-01

India's need of electrical power is enormous and per capita consumption of power is to be increased at least by ten times to reach the level of world average. Thermal Power generation faces two fold problems. First, there is scarcity of good quality fuel and second, increasing environmental pollution. India's self reliant, three stage, 'closed-fuel-cycle' nuclear power program is promising better solution to the above problems. To ensure Radiation Protection and Safety of Radiation Sources, Indian Nuclear Power program emphasizes upon design and engineering safety by incorporating necessary safety features in the design, operational safety through structured training program and typically through software packages to handle rare unsafe events and regulation by complying safety directives. A health survey among the radiation workers indicates that there is no extra threat to the public from nuclear power program. Based on latest technology, as available in case of nuclear power option, it is quite possible to meet high energy requirement with least impact on the environment.. (authors)

Medical big data: promise and challenges.

Science.gov (United States)

Lee, Choong Ho; Yoon, Hyung-Jin

2017-03-01

The concept of big data, commonly characterized by volume, variety, velocity, and veracity, goes far beyond the data type and includes the aspects of data analysis, such as hypothesis-generating, rather than hypothesis-testing. Big data focuses on temporal stability of the association, rather than on causal relationship and underlying probability distribution assumptions are frequently not required. Medical big data as material to be analyzed has various features that are not only distinct from big data of other disciplines, but also distinct from traditional clinical epidemiology. Big data technology has many areas of application in healthcare, such as predictive modeling and clinical decision support, disease or safety surveillance, public health, and research. Big data analytics frequently exploits analytic methods developed in data mining, including classification, clustering, and regression. Medical big data analyses are complicated by many technical issues, such as missing values, curse of dimensionality, and bias control, and share the inherent limitations of observation study, namely the inability to test causality resulting from residual confounding and reverse causation. Recently, propensity score analysis and instrumental variable analysis have been introduced to overcome these limitations, and they have accomplished a great deal. Many challenges, such as the absence of evidence of practical benefits of big data, methodological issues including legal and ethical issues, and clinical integration and utility issues, must be overcome to realize the promise of medical big data as the fuel of a continuous learning healthcare system that will improve patient outcome and reduce waste in areas including nephrology.

Medical big data: promise and challenges

Directory of Open Access Journals (Sweden)

Choong Ho Lee

2017-03-01

Full Text Available The concept of big data, commonly characterized by volume, variety, velocity, and veracity, goes far beyond the data type and includes the aspects of data analysis, such as hypothesis-generating, rather than hypothesis-testing. Big data focuses on temporal stability of the association, rather than on causal relationship and underlying probability distribution assumptions are frequently not required. Medical big data as material to be analyzed has various features that are not only distinct from big data of other disciplines, but also distinct from traditional clinical epidemiology. Big data technology has many areas of application in healthcare, such as predictive modeling and clinical decision support, disease or safety surveillance, public health, and research. Big data analytics frequently exploits analytic methods developed in data mining, including classification, clustering, and regression. Medical big data analyses are complicated by many technical issues, such as missing values, curse of dimensionality, and bias control, and share the inherent limitations of observation study, namely the inability to test causality resulting from residual confounding and reverse causation. Recently, propensity score analysis and instrumental variable analysis have been introduced to overcome these limitations, and they have accomplished a great deal. Many challenges, such as the absence of evidence of practical benefits of big data, methodological issues including legal and ethical issues, and clinical integration and utility issues, must be overcome to realize the promise of medical big data as the fuel of a continuous learning healthcare system that will improve patient outcome and reduce waste in areas including nephrology.

Japan's international cooperation programs on seismic safety of nuclear power plants

International Nuclear Information System (INIS)

Sanada, Akira

1997-01-01

MITI is promoting many international cooperation programs on nuclear safety area. The seismic safety of nuclear power plants (NPPs) is a one of most important cooperation areas. Experts from MITI and related organization join the multilateral cooperation programs carried out by international organization such as IAEA, OECD/NEA etc. MITI is also promoting bilateral cooperation programs such as information exchange meetings, training programs and seminars on nuclear safety with several countries. Concerning to the cooperation programs on seismic safety of NPPs such as information exchange and training, MITI shall continue and expand these programs. (J.P.N.)

Safety Test Program Summary SNAP 19 Pioneer Heat Source Safety Program

Energy Technology Data Exchange (ETDEWEB)

None,

1971-07-01

Sixteen heat source assemblies have been tested in support of the SNAP 19 Pioneer Safety Test Program. Seven were subjected to simulated reentry heating in various plasma arc facilities followed by impact on earth or granite. Six assemblies were tested under abort accident conditions of overpressure, shrapnel impact, and solid and liquid propellant fires. Three capsules were hot impacted under Transit capsule impact conditions to verify comparability of test results between the two similar capsule designs, thus utilizing both Pioneer and Transit Safety Test results to support the Safety Analysis Report for Pioneer. The tests have shown the fuel is contained under all nominal accident environments with the exception of minor capsule cracks under severe impact and solid fire environments. No catastrophic capsule failures occurred in this test which would release large quantities of fuel. In no test was fuel visible to the eye following impact or fire. Breached capsules were defined as those which exhibit thoria contamination on its surface following a test, or one which exhibited visible cracks in the post test metallographic analyses.

Making big sense from big data in toxicology by read-across.

Science.gov (United States)

Hartung, Thomas

2016-01-01

Modern information technologies have made big data available in safety sciences, i.e., extremely large data sets that may be analyzed only computationally to reveal patterns, trends and associations. This happens by (1) compilation of large sets of existing data, e.g., as a result of the European REACH regulation, (2) the use of omics technologies and (3) systematic robotized testing in a high-throughput manner. All three approaches and some other high-content technologies leave us with big data--the challenge is now to make big sense of these data. Read-across, i.e., the local similarity-based intrapolation of properties, is gaining momentum with increasing data availability and consensus on how to process and report it. It is predominantly applied to in vivo test data as a gap-filling approach, but can similarly complement other incomplete datasets. Big data are first of all repositories for finding similar substances and ensure that the available data is fully exploited. High-content and high-throughput approaches similarly require focusing on clusters, in this case formed by underlying mechanisms such as pathways of toxicity. The closely connected properties, i.e., structural and biological similarity, create the confidence needed for predictions of toxic properties. Here, a new web-based tool under development called REACH-across, which aims to support and automate structure-based read-across, is presented among others.

The NASA Aviation Safety Program: Overview

Science.gov (United States)

Shin, Jaiwon

2000-01-01

In 1997, the United States set a national goal to reduce the fatal accident rate for aviation by 80% within ten years based on the recommendations by the Presidential Commission on Aviation Safety and Security. Achieving this goal will require the combined efforts of government, industry, and academia in the areas of technology research and development, implementation, and operations. To respond to the national goal, the National Aeronautics and Space Administration (NASA) has developed a program that will focus resources over a five year period on performing research and developing technologies that will enable improvements in many areas of aviation safety. The NASA Aviation Safety Program (AvSP) is organized into six research areas: Aviation System Modeling and Monitoring, System Wide Accident Prevention, Single Aircraft Accident Prevention, Weather Accident Prevention, Accident Mitigation, and Synthetic Vision. Specific project areas include Turbulence Detection and Mitigation, Aviation Weather Information, Weather Information Communications, Propulsion Systems Health Management, Control Upset Management, Human Error Modeling, Maintenance Human Factors, Fire Prevention, and Synthetic Vision Systems for Commercial, Business, and General Aviation aircraft. Research will be performed at all four NASA aeronautics centers and will be closely coordinated with Federal Aviation Administration (FAA) and other government agencies, industry, academia, as well as the aviation user community. This paper provides an overview of the NASA Aviation Safety Program goals, structure, and integration with the rest of the aviation community.

Progress and safety aspects in process heat utilization from nuclear systems

International Nuclear Information System (INIS)

Barnert, H.

1995-01-01

Report about the Status and the Progress in the Various Programs and Projects in the Federal Republic of Germany in Process Heat Utilization from the High Temperature Reactor and on Recent Changes of the Atomic Law in the Federal Republic of Germany with Big Influence on the Safety of Nuclear Energy Technology. (author)

German Light-Water-Reactor Safety-Research Program

International Nuclear Information System (INIS)

Seipel, H.G.; Lummerzheim, D.; Rittig, D.

1977-01-01

The Light-Water-Reactor Safety-Research Program, which is part of the energy program of the Federal Republic of Germany, is presented in this article. The program, for which the Federal Minister of Research and Technology of the Federal Republic of Germany is responsible, is subdivided into the following four main problem areas, which in turn are subdivided into projects: (1) improvement of the operational safety and reliability of systems and components (projects: quality assurance, component safety); (2) analysis of the consequences of accidents (projects: emergency core cooling, containment, external impacts, pressure-vessel failure, core meltdown); (3) analysis of radiation exposure during operation, accident, and decommissioning (project: fission-product transport and radiation exposure); and (4) analysis of the risk created by the operation of nuclear power plants (project: risk and reliability). Various problems, which are included in the above-mentioned projects, are concurrently studied within the Heiss-Dampf Reaktor experiments

76 FR 74723 - New Car Assessment Program (NCAP); Safety Labeling

Science.gov (United States)

2011-12-01

... [Docket No. NHTSA 2010-0025] RIN 2127-AK51 New Car Assessment Program (NCAP); Safety Labeling AGENCY... NHTSA's regulation on vehicle labeling of safety rating information to reflect the enhanced NCAP ratings... Traffic Safety Administration under the enhanced NCAP testing and rating program. * * * * * (e) * * * (4...

Safety guidance and inspection program for particle accelerator

Energy Technology Data Exchange (ETDEWEB)

Lee, Do Whey [Korea Institute of Nuclear Safety, Taejon (Korea, Republic of); Lee, Hee Seock; Yeo, In Whan [Pohang Accelerator Laboratory, Pohang (Korea, Republic of)] (and others)

2001-03-15

The inspection program and the safety guidance were developed to enhance the radiation protection for the use of particle accelerators. First the classification of particle accelerators was conducted to develop the safety inspection protocol efficiently. The status of particle accelerators which were operated at the inside and outside of the country, and their safety programs were surveyed. The characteristics of radiation production was researched for each type of particle accelerators. Two research teams were launched for industrial and research accelerators and for medical accelerators, respectively. In each stages of a design, a fabrication, an installation, a commissioning, and normal operation of accelerators, those safety inspection protocols were developed. Because all protocols resulted from employing safety experts, doing the questionnaire, and direct facility surveys, it can be applicable to present safety problem directly. The detail improvement concepts were proposed to revise the domestic safety rule. This results might also be useful as a practical guidance for the radiation safety officer of an accelerator facility, and as the detail standard for the governmental inspection authorities.

India's power programs and its concern over environmental safety

International Nuclear Information System (INIS)

Prasad, G.E.; Mittra, J.; Sarma, M.S.R.

2000-01-01

India's need for electrical power is enormous and per capita consumption of power is to be increased at least by 10 times to reach the level of the world average. Thermal power generation faces two-fold problems. First, there is scarcity of good quality fuel and second, increasing environmental pollution. India 's self reliant, . three stage, 'closed-fuel-cycle' nuclear power program is promising a better solution to the above problems. To ensure Radiation Protection and Safety of Radiation Sources, the Indian Nuclear Power program emphasizes upon design and engineering safety by incorporating' necessary safety features in the design, operational safety through a structured training program and typically through software packages to handle rare unsafe events and regulation by complying safety directives. A health survey among the radiation workers indicates that there is no extra threat to the public from the nuclear power program. Based on the latest technology, as available in case of the nuclear power option, it is quite possible to meet high energy requirements with least impact on the environment. (authors)

EPRI program in water reactor safety

International Nuclear Information System (INIS)

Loewenstein, W.B.; Gelhaus, F.; Gopalakrishnan, A.

1975-01-01

The basis for EPRI's water reactor safety program is twofold. First is compilation and development of fundamental background data necessary for quantified light-water reactor (LWR) safety assurance appraisals. Second is development of realistic and experimentally bench-marked analytical procedures. The results are expected either to confirm the safety margins in current operating parameters, and to identify overly conservative controls, or, in some cases, to provide a basis for improvements to further minimize uncertainties in expected performance. Achievement of these objectives requires the synthesis of related current and projected experimental-analytical projects toward establishment of an experimentally-based analysis for the assurance of safety for LWRs

Safety in the Chemical Laboratory: Safety in the Chemistry Laboratories: A Specific Program.

Science.gov (United States)

Corkern, Walter H.; Munchausen, Linda L.

1983-01-01

Describes a safety program adopted by Southeastern Louisiana University. Students are given detailed instructions on laboratory safety during the first laboratory period and a test which must be completely correct before they are allowed to return to the laboratory. Test questions, list of safety rules, and a laboratory accident report form are…

Big nuclear accidents

International Nuclear Information System (INIS)

Marshall, W.; Billingon, D.E.; Cameron, R.F.; Curl, S.J.

1983-09-01

Much of the debate on the safety of nuclear power focuses on the large number of fatalities that could, in theory, be caused by extremely unlikely but just imaginable reactor accidents. This, along with the nuclear industry's inappropriate use of vocabulary during public debate, has given the general public a distorted impression of the risks of nuclear power. The paper reviews the way in which the probability and consequences of big nuclear accidents have been presented in the past and makes recommendations for the future, including the presentation of the long-term consequences of such accidents in terms of 'loss of life expectancy', 'increased chance of fatal cancer' and 'equivalent pattern of compulsory cigarette smoking'. The paper presents mathematical arguments, which show the derivation and validity of the proposed methods of presenting the consequences of imaginable big nuclear accidents. (author)

HTGR safety research program

International Nuclear Information System (INIS)

Barsell, A.W.; Olsen, B.E.; Silady, F.A.

1981-01-01

An HTGR safety research program is being performed supporting and guided in priorities by the AIPA Probabilistic Risk Study. Analytical and experimental studies have been conducted in four general areas where modeling or data assumptions contribute to large uncertainties in the consequence assessments and thus, in the risk assessment for key core heat-up accident scenarios. Experimental data have been obtained on time-dependent release of fission products from the fuel particles, and plateout characteristics of condensible fission products in the primary circuit. Potential failure modes of primarily top head PCRV components as well as concrete degradation processes have been analyzed using a series of newly developed models and interlinked computer programs. Containment phenomena, including fission product deposition and potential flammability of liberated combustible gases have been studied analytically. Lastly, the behaviour of boron control material in the core and reactor subcriticality during core heatup have been examined analytically. Research in these areas has formed the basis for consequence updates in GA-A15000. Systematic derivation of future safety research priorities is also discussed. (author)

Big data analytics turning big data into big money

CERN Document Server

Ohlhorst, Frank J

2012-01-01

Unique insights to implement big data analytics and reap big returns to your bottom line Focusing on the business and financial value of big data analytics, respected technology journalist Frank J. Ohlhorst shares his insights on the newly emerging field of big data analytics in Big Data Analytics. This breakthrough book demonstrates the importance of analytics, defines the processes, highlights the tangible and intangible values and discusses how you can turn a business liability into actionable material that can be used to redefine markets, improve profits and identify new business opportuni

Analysis of School Food Safety Programs Based on HACCP Principles

Science.gov (United States)

Roberts, Kevin R.; Sauer, Kevin; Sneed, Jeannie; Kwon, Junehee; Olds, David; Cole, Kerri; Shanklin, Carol

2014-01-01

Purpose/Objectives: The purpose of this study was to determine how school districts have implemented food safety programs based on HACCP principles. Specific objectives included: (1) Evaluate how schools are implementing components of food safety programs; and (2) Determine foodservice employees food-handling practices related to food safety.…

Development of a safety communication and recognition program for construction.

Science.gov (United States)

Sparer, Emily H; Herrick, Robert F; Dennerlein, Jack T

2015-05-01

Leading-indicator-based (e.g., hazard recognition) incentive programs provide an alternative to controversial lagging-indicator-based (e.g., injury rates) programs. We designed a leading-indicator-based safety communication and recognition program that incentivized safe working conditions. The program was piloted for two months on a commercial construction worksite and then redesigned using qualitative interview and focus group data from management and workers. We then ran the redesigned program for six months on the same worksite. Foremen received detailed weekly feedback from safety inspections, and posters displayed worksite and subcontractor safety scores. In the final program design, the whole site, not individual subcontractors, was the unit of analysis and recognition. This received high levels of acceptance from workers, who noted increased levels of site unity and team-building. This pilot program showed that construction workers value solidarity with others on site, demonstrating the importance of health and safety programs that engage all workers through a reliable and consistent communication infrastructure. © The Author(s) 2015 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Fusion Safety Program. Annual report, FY 1982

International Nuclear Information System (INIS)

Crocker, J.G.; Cohen, S.

1983-07-01

The Fusion Safety Program major activities for Fiscal Year 1982 are summarized in this report. The program was started in FY-79, with the Idaho National Engineering Laboratory (INEL) designated as lead laboratory and EG and G Idaho, Inc., named as prime contractor to implement this role. The report contains four sections: EG and G Idaho, Inc., Activities at INEL includes major portions of papers dealing with ongoing work in tritium implantation experiments, tritium risk assessment, transient code development, heat transfer and fluid flow analysis, and high temperature oxidation and mobilization of structural material experiments. The section Outside Contracts includes studies of superconducting magnet safety conducted by Argonne National Laboratory, experiments concerning superconductor safety issues performed by the Francis Bitter Magnet Laboratory of the Massachusetts Institute of Technology (MIT) to verify analytical work, a continuation of safety and environmental studies by MIT, a summary of lithium safety experiments at Hanford Engineering Development Laboratory, and the results of tritium gas conversion to oxide experiments at Oak Ridge National Laboratory. A List of Publications and Proposed FY-83 Activities are also presented

Big nuclear accidents

International Nuclear Information System (INIS)

Marshall, W.

1983-01-01

Much of the debate on the safety of nuclear power focuses on the large number of fatalities that could, in theory, be caused by extremely unlikely but imaginable reactor accidents. This, along with the nuclear industry's inappropriate use of vocabulary during public debate, has given the general public a distorted impression of the safety of nuclear power. The way in which the probability and consequences of big nuclear accidents have been presented in the past is reviewed and recommendations for the future are made including the presentation of the long-term consequences of such accidents in terms of 'reduction in life expectancy', 'increased chance of fatal cancer' and the equivalent pattern of compulsory cigarette smoking. (author)

29 CFR 1960.12 - Dissemination of occupational safety and health program information.

Science.gov (United States)

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Dissemination of occupational safety and health program... OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Administration § 1960.12 Dissemination of occupational safety and health program information. (a) Copies of the Act, Executive Order 12196, program...

Safety Culture Perceptions in a Collegiate Aviation Program: A Systematic Assessment

OpenAIRE

Adjekum, Daniel Kwasi

2014-01-01

An assessment of the perceptions of respondents on the safety culture at an accredited Part 141 four year collegiate aviation program was conducted as part of the implementation of a safety management system (SMS). The Collegiate Aviation Program Safety Culture Assessment Survey (CAPSCAS), which was modified and revalidated from the existing Commercial Aviation Safety Survey (CASS), was used. Participants were drawn from flight students and certified flight instructors in the program. The sur...

Effective radiological safety program for electron linear accelerators

International Nuclear Information System (INIS)

Swanson, W.P.

1980-10-01

An outline is presented of some of the main elements of an electron accelerator radiological safety program. The discussion includes types of accelerator facilities, types of radiations to be anticipated, activity induced in components, air and water, and production of toxic gases. Concepts of radiation shielding design are briefly discussed and organizational aspects are considered as an integral part of the overall safety program

41 CFR 128-1.8006 - Seismic Safety Program requirements.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Seismic Safety Program requirements. 128-1.8006 Section 128-1.8006 Public Contracts and Property Management Federal Property Management Regulations System (Continued) DEPARTMENT OF JUSTICE 1-INTRODUCTION 1.80-Seismic Safety Program...

Fusion Safety Program annual report, Fiscal Year 1993

International Nuclear Information System (INIS)

Longhurst, G.R.; Cadwallader, L.C.; Dolan, T.J.; Herring, J.S.; McCarthy, K.A.; Merrill, B.J.; Motloch, C.G.; Petti, D.A.

1993-12-01

This report summarizes the major activities of the Fusion Safety Program in Fiscal Year 1993. The Idaho National Engineering Laboratory (INEL) has been designated by DOE as the lead laboratory for fusion safety, and EG ampersand G Idaho, Inc., is the prime contractor for INEL operations. The Fusion Safety Program was initiated in 1979. Activities are conducted at the INEL and in participating organizations, including universities and private companies. Technical areas covered in the report include tritium safety, beryllium safety, activation product release, reactions involving potential plasma-facing materials, safety of fusion magnet systems, plasma disruptions and edge physics modeling, risk assessment failure rates, computer codes for reactor transient analysis, and regulatory support. These areas include work completed in support of the International Thermonuclear Experimental Reactor (ITER). Also included in the report are summaries of the safety and environmental studies performed at the INEL for the Tokamak Physics Experiment and the Tokamak Fusion Test Reactor projects at the Princeton Plasma Physics Laboratory and a summary of the technical support for the ARIES/PULSAR commercial reactor design studies

LSVT LOUD and LSVT BIG: Behavioral Treatment Programs for Speech and Body Movement in Parkinson Disease

Directory of Open Access Journals (Sweden)

Cynthia Fox

2012-01-01

Full Text Available Recent advances in neuroscience have suggested that exercise-based behavioral treatments may improve function and possibly slow progression of motor symptoms in individuals with Parkinson disease (PD. The LSVT (Lee Silverman Voice Treatment Programs for individuals with PD have been developed and researched over the past 20 years beginning with a focus on the speech motor system (LSVT LOUD and more recently have been extended to address limb motor systems (LSVT BIG. The unique aspects of the LSVT Programs include the combination of (a an exclusive target on increasing amplitude (loudness in the speech motor system; bigger movements in the limb motor system, (b a focus on sensory recalibration to help patients recognize that movements with increased amplitude are within normal limits, even if they feel “too loud” or “too big,” and (c training self-cueing and attention to action to facilitate long-term maintenance of treatment outcomes. In addition, the intensive mode of delivery is consistent with principles that drive activity-dependent neuroplasticity and motor learning. The purpose of this paper is to provide an integrative discussion of the LSVT Programs including the rationale for their fundamentals, a summary of efficacy data, and a discussion of limitations and future directions for research.

The Big Sky inside

Science.gov (United States)

Adams, Earle; Ward, Tony J.; Vanek, Diana; Marra, Nancy; Hester, Carolyn; Knuth, Randy; Spangler, Todd; Jones, David; Henthorn, Melissa; Hammill, Brock; Smith, Paul; Salisbury, Rob; Reckin, Gene; Boulafentis, Johna

2009-01-01

The University of Montana (UM)-Missoula has implemented a problem-based program in which students perform scientific research focused on indoor air pollution. The Air Toxics Under the Big Sky program (Jones et al. 2007; Adams et al. 2008; Ward et al. 2008) provides a community-based framework for understanding the complex relationship between poor…

Implementation of a patient safety program at a tertiary health system: A longitudinal analysis of interventions and serious safety events.

Science.gov (United States)

Cropper, Douglas P; Harb, Nidal H; Said, Patricia A; Lemke, Jon H; Shammas, Nicolas W

2018-04-01

We hypothesize that implementation of a safety program based on high reliability organization principles will reduce serious safety events (SSE). The safety program focused on 7 essential elements: (a) safety rounding, (b) safety oversight teams, (c) safety huddles, (d) safety coaches, (e) good catches/safety heroes, (f) safety education, and (g) red rule. An educational curriculum was implemented focusing on changing high-risk behaviors and implementing critical safety policies. All unusual occurrences were captured in the Midas system and investigated by risk specialists, the safety officer, and the chief medical officer. A multidepartmental committee evaluated these events, and a root cause analysis (RCA) was performed. Events were tabulated and serious safety event (SSE) recorded and plotted over time. Safety success stories (SSSs) were also evaluated over time. A steady drop in SSEs was seen over 9 years. Also a rise in SSSs was evident, reflecting on staff engagement in the program. The parallel change in SSEs, SSSs, and the implementation of various safety interventions highly suggest that the program was successful in achieving its goals. A safety program based on high-reliability organization principles and made a core value of the institution can have a significant positive impact on reducing SSEs. © 2018 American Society for Healthcare Risk Management of the American Hospital Association.

MORT: a safety management program developed for ERDA

International Nuclear Information System (INIS)

1977-03-01

ERDA's System Safety Development Center (SSDC) is located at the Idaho National Engineering Laboratory under the EG and G Idaho, Inc., contract administered by the Idaho Operations Office. The SSDC performs a variety of tasks for ERDA's Division of Safety, Standards, and Compliance, for the purpose of improvement and application of safety program elements. Primary among these tasks are development and demonstration of new methodologies, training, consultation, and technical writing. This information package (ERDA 77-38) is an example of the later task, aimed at communicating to a general audience the nature and purpose of major features of the Management Oversight and Risk Tree (MORT) program. The SSDC also originates a guideline series of monographs (the ERDA 76-45 series) for individuals who desire more specific explanations of the MORT program

Nuclear Criticality Safety Organization qualification program. Revision 4

International Nuclear Information System (INIS)

Carroll, K.J.; Taylor, R.G.; Worley, C.A.

1997-01-01

The Nuclear Criticality Safety Organization (NCSO) is committed to developing and maintaining a staff of highly qualified personnel to meet the current and anticipated needs in Nuclear Criticality Safety (NCS) at the Oak Ridge Y-12 Plant. This document defines the Qualification Program to address the NCSO technical and managerial qualification as required by the Y-12 Training Implementation Matrix (TIM). It is implemented through a combination of LMES plant-wide training courses and professional nuclear criticality safety training provided within the organization. This Qualification Program is applicable to technical and managerial NCSO personnel, including temporary personnel, sub-contractors and/or LMES employees on loan to the NCSO, who perform the NCS tasks or serve NCS-related positions as defined in sections 5 and 6 of this program

Nuclear criticality safety specialist training and qualification programs

International Nuclear Information System (INIS)

Hopper, C.M.

1993-01-01

Since the beginning of the Nuclear Criticality Safety Division of the American Nuclear Society (ANS) in 1967, the nuclear criticality safety (NCS) community has sought to provide an exchange of information at a national level to facilitate the education and development of NCS specialists. In addition, individual criticality safety organizations within government contractor and licensed commercial nonreactor facilities have developed training and qualification programs for their NCS specialists. However, there has been substantial variability in the content and quality of these program requirements and personnel qualifications, at least as measured within the government contractor community. The purpose of this paper is to provide a brief, general history of staff training and to describe the current direction and focus of US DOE guidance for the content of training and qualification programs designed to develop NCS specialists

Engineering and Safety Partnership Enhances Safety of the Space Shuttle Program (SSP)

Science.gov (United States)

Duarte, Alberto

2007-01-01

Project Management must use the risk assessment documents (RADs) as tools to support their decision making process. Therefore, these documents have to be initiated, developed, and evolved parallel to the life of the project. Technical preparation and safety compliance of these documents require a great deal of resources. Updating these documents after-the-fact not only requires substantial increase in resources - Project Cost -, but this task is also not useful and perhaps an unnecessary expense. Hazard Reports (HRs), Failure Modes and Effects Analysis (FMEAs), Critical Item Lists (CILs), Risk Management process are, among others, within this category. A positive action resulting from a strong partnership between interested parties is one way to get these documents and related processes and requirements, released and updated in useful time. The Space Shuttle Program (SSP) at the Marshall Space Flight Center has implemented a process which is having positive results and gaining acceptance within the Agency. A hybrid Panel, with equal interest and responsibilities for the two larger organizations, Safety and Engineering, is the focal point of this process. Called the Marshall Safety and Engineering Review Panel (MSERP), its charter (Space Shuttle Program Directive 110 F, April 15, 2005), and its Operating Control Plan emphasizes the technical and safety responsibilities over the program risk documents: HRs; FMEA/CILs; Engineering Changes; anomalies/problem resolutions and corrective action implementations, and trend analysis. The MSERP has undertaken its responsibilities with objectivity, assertiveness, dedication, has operated with focus, and has shown significant results and promising perspectives. The MSERP has been deeply involved in propulsion systems and integration, real time technical issues and other relevant reviews, since its conception. These activities have transformed the propulsion MSERP in a truly participative and value added panel, making a

Big Opportunities and Big Concerns of Big Data in Education

Science.gov (United States)

Wang, Yinying

2016-01-01

Against the backdrop of the ever-increasing influx of big data, this article examines the opportunities and concerns over big data in education. Specifically, this article first introduces big data, followed by delineating the potential opportunities of using big data in education in two areas: learning analytics and educational policy. Then, the…

Japan`s international cooperation programs on seismic safety of nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Sanada, Akira [Agency of Natural Resources and Energy, Tokyo (Japan)

1997-03-01

MITI is promoting many international cooperation programs on nuclear safety area. The seismic safety of nuclear power plants (NPPs) is a one of most important cooperation areas. Experts from MITI and related organization join the multilateral cooperation programs carried out by international organization such as IAEA, OECD/NEA etc. MITI is also promoting bilateral cooperation programs such as information exchange meetings, training programs and seminars on nuclear safety with several countries. Concerning to the cooperation programs on seismic safety of NPPs such as information exchange and training, MITI shall continue and expand these programs. (J.P.N.)

Safety implications of standardized continuous quality improvement programs in community pharmacy.

Science.gov (United States)

Boyle, Todd A; Ho, Certina; Mackinnon, Neil J; Mahaffey, Thomas; Taylor, Jeffrey M

2013-06-01

Standardized continuous quality improvement (CQI) programs combine Web-based technologies and standardized improvement processes, tools, and expectations to enable quality-related events (QREs) occurring in individual pharmacies to be shared with pharmacies in other jurisdictions. Because standardized CQI programs are still new to community pharmacy, little is known about how they impact medication safety. This research identifies key aspects of medication safety that change as a result of implementing a standardized CQI program. Fifty-three community pharmacies in Nova Scotia, Canada, adopted the SafetyNET-Rx standardized CQI program in April 2010. The Institute for Safe Medication Practices (ISMP) Canada's Medication Safety Self-Assessment (MSSA) survey was administered to these pharmacies before and 1 year into their use of the SafetyNET-Rx program. The nonparametric Wilcoxon signed-rank test was used to explore where changes in patient safety occurred as a result of SafetyNETRx use. Significant improvements occurred with quality processes and risk management, staff competence, and education, and communication of drug orders and other information. Patient education, environmental factors, and the use of devices did not show statistically significant changes. As CQI programs are designed to share learning from QREs, it is reassuring to see that the largest improvements are related to quality processes, risk management, staff competence, and education.

Safety and economic impacts of photo radar program.

Science.gov (United States)

Chen, Greg

2005-12-01

Unsafe speed is one of the major traffic safety challenges facing motorized nations. In 2003, unsafe speed contributed to 31 percent of all fatal collisions, causing a loss of 13,380 lives in the United States alone. The economic impact of speeding is tremendous. According to NHTSA, the cost of unsafe speed related collisions to the American society exceeds 40 billion US dollars per year. In response, automated photo radar speed enforcement programs have been implemented in many countries. This study assesses the economic impacts of a large-scale photo radar program in British Columbia. The knowledge generated from this study could inform policy makers and project managers in making informed decisions with regard to this highly effective and efficient, yet very controversial program. This study establishes speed and safety effects of photo radar programs by summarizing two physical impact investigations in British Columbia. It then conducts a cost-benefit analysis to assess the program's economic impacts. The cost-benefit analysis takes into account both societal and funding agency's perspectives. It includes a comprehensive account of major impacts. It uses willingness to pay principle to value human lives saved and injuries avoided. It incorporates an extended sensitivity analysis to quantify the robustness of base case conclusions. The study reveals an annual net benefit of approximately 114 million in year 2001 Canadian dollars to British Columbians. The study also finds a net annual saving of over 38 million Canadian dollars for the Insurance Corporation of British Columbia (ICBC) that funded the program. These results are robust under almost all alternative scenarios tested. The only circumstance under which the net benefit of the program turns negative is when the real safety effects were one standard deviation below the estimated values, which is possible but highly unlikely. Automated photo radar traffic safety enforcement can be an effective and efficient

Developing an integrated dam safety program

International Nuclear Information System (INIS)

Nielsen, N. M.; Lampa, J.

1996-01-01

An effort has been made to demonstrate that dam safety is an integral part of asset management which, when properly done, ensures that all objectives relating to safety and compliance, profitability, stakeholders' expectations and customer satisfaction, are achieved. The means to achieving this integration of the dam safety program and the level of effort required for each core function have been identified using the risk management approach to pinpoint vulnerabilities, and subsequently to focus priorities. The process is considered appropriate for any combination of numbers, sizes and uses of dams, and is designed to prevent exposure to unacceptable risks. 5 refs., 1 tab

Big data in biomedicine.

Science.gov (United States)

Costa, Fabricio F

2014-04-01

The increasing availability and growth rate of biomedical information, also known as 'big data', provides an opportunity for future personalized medicine programs that will significantly improve patient care. Recent advances in information technology (IT) applied to biomedicine are changing the landscape of privacy and personal information, with patients getting more control of their health information. Conceivably, big data analytics is already impacting health decisions and patient care; however, specific challenges need to be addressed to integrate current discoveries into medical practice. In this article, I will discuss the major breakthroughs achieved in combining omics and clinical health data in terms of their application to personalized medicine. I will also review the challenges associated with using big data in biomedicine and translational science. Copyright © 2013 Elsevier Ltd. All rights reserved.

Scaling Big Data Cleansing

KAUST Repository

Khayyat, Zuhair

2017-01-01

on top of general-purpose distributed platforms. Its programming inter- face allows users to express data quality rules independently from the requirements of parallel and distributed environments. Without sacrificing their quality, BigDans- ing also

Research and development program in reactor safety for NUCLEBRAS

International Nuclear Information System (INIS)

Pinheiro, R.B.; Resende Lobo, A.A. de; Horta, J.A.L.; Avelar Esteves, F. de; Lepecki, W.P.S.; Mohr, K.; Selvatici, E.

1984-01-01

With technical assistance from the IAEA, it was established recently an analytical and experimental Research and Development Program for NUCLEBRAS in the area of reactor safety. The main objectives of this program is to make possible, with low investments, the active participation of NUCLEBRAS in international PWR safety research. The analytical and experimental activities of the program are described with some detail, and the main results achieved up to now are presented. (Author) [pt

The Nordic safety program on accident consequence assessment

International Nuclear Information System (INIS)

Tveten, U.

1988-01-01

One important part of Nordic cooperation is partially funded by the Nordic Council of Ministers, namely the work performed within the Nordic Safety Program (often referred to as the NKA projects). NKA is the Nordic abbreviation of the Nordic Liaison Committee on Atomic Energy. One program area in the present four-year period is concerned with problems related to reactor accident consequence assessment, and contains almost twenty projects covering a wide range of subjects. The author is program coordinator for this program area. The program will be completed in 1989. The program was strongly influenced by Chernobyl, and a number of new projects were included in the program in 1986. Involved in the program are these Nordic institutions: Riso National Laboratory (Denmark). Technical Research Centre of Finland. Finnish Centre for Radiation and Nuclear Safety. Finnish Meteorological Institute. Institute for Energy Technology (Norway). Agricultural University of Norway. Meteorological Institute of Norway. Studsvik Energiteknik AB (Sweden). National Defence Research Laboratory (Sweden)

Systems Analysis of NASA Aviation Safety Program: Final Report

Science.gov (United States)

Jones, Sharon M.; Reveley, Mary S.; Withrow, Colleen A.; Evans, Joni K.; Barr, Lawrence; Leone, Karen

2013-01-01

A three-month study (February to April 2010) of the NASA Aviation Safety (AvSafe) program was conducted. This study comprised three components: (1) a statistical analysis of currently available civilian subsonic aircraft data from the National Transportation Safety Board (NTSB), the Federal Aviation Administration (FAA), and the Aviation Safety Information Analysis and Sharing (ASIAS) system to identify any significant or overlooked aviation safety issues; (2) a high-level qualitative identification of future safety risks, with an assessment of the potential impact of the NASA AvSafe research on the National Airspace System (NAS) based on these risks; and (3) a detailed, top-down analysis of the NASA AvSafe program using an established and peer-reviewed systems analysis methodology. The statistical analysis identified the top aviation "tall poles" based on NTSB accident and FAA incident data from 1997 to 2006. A separate examination of medical helicopter accidents in the United States was also conducted. Multiple external sources were used to develop a compilation of ten "tall poles" in future safety issues/risks. The top-down analysis of the AvSafe was conducted by using a modification of the Gibson methodology. Of the 17 challenging safety issues that were identified, 11 were directly addressed by the AvSafe program research portfolio.

Management of radioactive material safety programs at medical facilities. Final report

International Nuclear Information System (INIS)

Camper, L.W.; Schlueter, J.; Woods, S.

1997-05-01

A Task Force, comprising eight US Nuclear Regulatory Commission and two Agreement State program staff members, developed the guidance contained in this report. This report describes a systematic approach for effectively managing radiation safety programs at medical facilities. This is accomplished by defining and emphasizing the roles of an institution's executive management, radiation safety committee, and radiation safety officer. Various aspects of program management are discussed and guidance is offered on selecting the radiation safety officer, determining adequate resources for the program, using such contractual services as consultants and service companies, conducting audits, and establishing the roles of authorized users and supervised individuals; NRC's reporting and notification requirements are discussed, and a general description is given of how NRC's licensing, inspection and enforcement programs work

29 CFR 1960.80 - Secretary's evaluations of agency occupational safety and health programs.

Science.gov (United States)

2010-07-01

... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.80 Secretary's evaluations of agency occupational safety and health... evaluating an agency's occupational safety and health program. To accomplish this, the Secretary shall...

Fusion Safety Program annual report: Fiscal year 1987

International Nuclear Information System (INIS)

Holland, D.F.; Herring, J.S.; Longhurst, G.R.; Lyon, R.E.; Merrill, B.J.; Piet, S.J.

1988-02-01

This report summarizes the Fusion Safety Program major activities in fiscal year 1987. The Idaho National Engineering Laboratory (INEL) is the designated lead laboraotry and EG and G Idaho, Inc., is the prime contractor for this program, which was initiated in 1979. Activities are conducted at the INEL and in participating laboratories including the Hanford Engineering Development Laboratory (HEDL), the Massachusetts Institute of Technology (MIT), and the University of Wisconsin. The technical areas covered in the report include tritium safety, activation product release, reactions involving lithium breeding materials, safety of fusion magnet systems, plasma disruptions, risk assessment methodology, computer codes development for reactor transients, and fusion waste management. Also included in the report is a summary of the safety and environmental analysis and conventional facilities design performed by INEL for the Compact Ignition Tokamak design project, the safety analysis and documentation performed for the Tokamak Ignition/Burn Experimental Reactor design, and the technical support provided to the Environmental Safety and Economics Committee (ESECOM). 42 refs., 17 figs., 4 tabs

High-heat tank safety issue resolution program plan. Revision 2

International Nuclear Information System (INIS)

Wang, O.S.

1994-12-01

The purpose of this program plan is to provide a guide for selecting corrective actions that will mitigate and/or remediate the high-heat waste tank safety issue for single-shell tank 241-C-106. The heat source of approximately 110,000 Btu/hr is the radioactive decay of the stored waste material (primarily 90 Sr) inadvertently transferred into the tank in the later 1960s. Currently, forced ventilation, with added water to promote thermal conductivity and evaporation cooling, is used for heat removal. The method is very effective and economical. At this time, the only viable solution identified to permanently resolve this safety issue is the removal of heat-generating waste in the tank. This solution is being aggressively pursued as the only remediation method to this safety issue, and tank 241-C-106 has been selected as the first single-shell tank for retrieval. The current cooling method and other alternatives are addressed in this program as means to mitigate this safety issue before retrieval. This program plan has three parts. The first part establishes program objectives and defines safety issue, drivers, and resolution criteria and strategy. The second part evaluates the high-heat safety issue and its mitigation and remediation methods and other alternatives according to resolution logic. The third part identifies major tasks and alternatives for mitigation and resolution of the safety issue. A table of best-estimate schedules for the key tasks is also included in this program plan

29 CFR 1960.79 - Self-evaluations of occupational safety and health programs.

Science.gov (United States)

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Self-evaluations of occupational safety and health programs. 1960.79 Section 1960.79 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs...

A program approach for site safety at oil spills

International Nuclear Information System (INIS)

Whipple, F.L.; Glenn, S.P.; Ocken, J.J.; Ott, G.L.

1993-01-01

When OSHA developed the hazardous waste operations (Hazwoper) regulations (29 CFR 1910.120) members of the response community envisioned a separation of oil and open-quotes hazmatclose quotes response operations. Organizations that deal with oil spills have had difficulty applying Hazwoper regulations to oil spill operations. This hinders meaningful implementation of the standard for their personnel. We should approach oil spills with the same degree of caution that is applied to hazmat response. Training frequently does not address the safety of oil spill response operations. Site-specific safety and health plans often are neglected or omitted. Certain oils expose workers to carcinogens, as well as chronic and acute hazards. Significant physical hazards are most important. In responding to oil spills, the hazards must be addressed. It is the authors' contention that a need exists for safety program at oil spill sites. Gone are the days of labor pool hires cleaning up spills in jeans and sneakers. The key to meaningful programs for oil spills requires application of controls focused on relevant safety risks rather than minimal chemical exposure hazards. Working with concerned reviewers from other agencies and organizations, the authors have developed a general safety and health program for oil spill response. It is intended to serve as the basis for organizations to customize their own written safety and health program (required by OSHA). It also provides a separate generic site safety plan for emergency phase oil spill operations (check-list) and long term post-emergency phase operations

Integrated program of using of Probabilistic Safety Analysis in Spain

International Nuclear Information System (INIS)

1998-01-01

Since 25 June 1986, when the CSN (Nuclear Safety Conseil) approve the Integrated Program of Probabilistic Safety Analysis, this program has articulated the main activities of CSN. This document summarize the activities developed during these years and reviews the Integrated programme

Construction safety program for the National Ignition Facility

International Nuclear Information System (INIS)

Cerruti, S.J.

1997-01-01

The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF. During this period, all workers are required to implement measures to create a universal awareness which promotes safe practice at the work site, and which will achieve NIF's management objectives in preventing accidents and illnesses. Construction safety for NIF is predicated on everyone performing their jobs in a manner which prevents job-related disabling injuries and illnesses. The CSP outlines the minimum environment, safety, and health (ES ampersand H) standards, LLNL policies and the Construction Industry Institute (CII) Zero Injury Techniques requirements that all workers at the NIF construction site shall adhere to during the construction period of NIF. It identifies the safety requirements which the NIF organizational Elements, construction contractors and construction subcontractors must include in their safety plans for the construction period of NIF, and presents safety protocols and guidelines which workers shall follow to assure a safe and healthful work environment. The CSP also identifies the ES ampersand H responsibilities of LLNL employees, non-LLNL employees, construction contractors, construction subcontractors, and various levels of management within the NIF Program at LLNL. In addition, the CSP contains the responsibilities and functions of ES ampersand H support organizations and administrative groups, and describes their interactions with the NIF Program

Construction safety program for the National Ignition Facility

Energy Technology Data Exchange (ETDEWEB)

Cerruti, S.J.

1997-01-01

The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF. During this period, all workers are required to implement measures to create a universal awareness which promotes safe practice at the work site, and which will achieve NIF`s management objectives in preventing accidents and illnesses. Construction safety for NIF is predicated on everyone performing their jobs in a manner which prevents job-related disabling injuries and illnesses. The CSP outlines the minimum environment, safety, and health (ES&H) standards, LLNL policies and the Construction Industry Institute (CII) Zero Injury Techniques requirements that all workers at the NIF construction site shall adhere to during the construction period of NIF. It identifies the safety requirements which the NIF organizational Elements, construction contractors and construction subcontractors must include in their safety plans for the construction period of NIF, and presents safety protocols and guidelines which workers shall follow to assure a safe and healthful work environment. The CSP also identifies the ES&H responsibilities of LLNL employees, non-LLNL employees, construction contractors, construction subcontractors, and various levels of management within the NIF Program at LLNL. In addition, the CSP contains the responsibilities and functions of ES&H support organizations and administrative groups, and describes their interactions with the NIF Program.

Management of radioactive material safety programs at medical facilities. Final report

Energy Technology Data Exchange (ETDEWEB)

Camper, L.W.; Schlueter, J.; Woods, S. [and others

1997-05-01

A Task Force, comprising eight US Nuclear Regulatory Commission and two Agreement State program staff members, developed the guidance contained in this report. This report describes a systematic approach for effectively managing radiation safety programs at medical facilities. This is accomplished by defining and emphasizing the roles of an institution`s executive management, radiation safety committee, and radiation safety officer. Various aspects of program management are discussed and guidance is offered on selecting the radiation safety officer, determining adequate resources for the program, using such contractual services as consultants and service companies, conducting audits, and establishing the roles of authorized users and supervised individuals; NRC`s reporting and notification requirements are discussed, and a general description is given of how NRC`s licensing, inspection and enforcement programs work.

Intelligent Test Mechanism Design of Worn Big Gear

Directory of Open Access Journals (Sweden)

Hong-Yu LIU

2014-10-01

Full Text Available With the continuous development of national economy, big gear was widely applied in metallurgy and mine domains. So, big gear plays an important role in above domains. In practical production, big gear abrasion and breach take place often. It affects normal production and causes unnecessary economic loss. A kind of intelligent test method was put forward on worn big gear mainly aimed at the big gear restriction conditions of high production cost, long production cycle and high- intensity artificial repair welding work. The measure equations transformations were made on involute straight gear. Original polar coordinate equations were transformed into rectangular coordinate equations. Big gear abrasion measure principle was introduced. Detection principle diagram was given. Detection route realization method was introduced. OADM12 laser sensor was selected. Detection on big gear abrasion area was realized by detection mechanism. Tested data of unworn gear and worn gear were led in designed calculation program written by Visual Basic language. Big gear abrasion quantity can be obtained. It provides a feasible method for intelligent test and intelligent repair welding on worn big gear.

Research program on regulatory safety research - Synthesis report 2008

International Nuclear Information System (INIS)

Mailaender, R

2009-06-01

This report for the Swiss Federal Office of Energy (SFOE) summarises the program's main points of interest, work done in the year 2008 and the results obtained. The main points of the research program, which is co-ordinated by the Swiss Federal Nuclear Safety Inspectorate ENSI, are discussed. Topics covered concern reactor safety as well as human, organisational and safety aspects. Work done in several areas concerning reactor safety and materials as well as interactions in severe accidents in light-water reactors is described. Radiation protection, the transport and disposal of radioactive wastes and safety culture are also looked at. Finally, national and international co-operation is briefly looked at and work to be done in 2009 is reviewed. The report is completed with a list of research and development projects co-ordinated by ENSI

Fast reactor test facilities in the US safety program

International Nuclear Information System (INIS)

Avery, R.; Dickerman, C.E.; Lennox, D.H.; Rose, D.

1979-01-01

The needs for safety information derivable from in-pile programs are reviewed, and the correlation made with existing and planned capability. In view of the current status of the U.S. breeder program, emphasis is given in the review to the impact of different fast breeder options on the required program and facilities. It is concluded that facility needs are somewhat independent of specific fast breeder concept, even though the relative emphasis on the various safety issues will differ. 8 refs

Extended burnup demonstration: reactor fuel program. Pre-irradiation characterization and summary of pre-program poolside examinations. Big Rock Point extended burnup fuel

International Nuclear Information System (INIS)

Exarhos, C.A.; Van Swam, L.F.; Wahlquist, F.P.

1981-12-01

This report is a resource document characterizing the 64 fuel rods being irradiated at the Big Rock Point reactor as part of the Extended Burnup Demonstration being sponsored jointly by the US Department of Energy, Consumers Power Company, Exxon Nuclear Company, and General Public Utilities. The program entails extending the exposure of standard BWR fuel to a discharge average of 38,000 MWD/MTU to demonstrate the feasibility of operating fuel of standard design to levels significantly above current limits. The fabrication characteristics of the Big Rock Point EBD fuel are presented along with measurement of rod length, rod diameter, pellet stack height, and fuel rod withdrawal force taken at poolside at burnups up to 26,200 MWD/MTU. A review of the fuel examination data indicates no performance characteristics which might restrict the continued irradiation of the fuel

Adapting bioinformatics curricula for big data

Science.gov (United States)

Greene, Anna C.; Giffin, Kristine A.; Greene, Casey S.

2016-01-01

Modern technologies are capable of generating enormous amounts of data that measure complex biological systems. Computational biologists and bioinformatics scientists are increasingly being asked to use these data to reveal key systems-level properties. We review the extent to which curricula are changing in the era of big data. We identify key competencies that scientists dealing with big data are expected to possess across fields, and we use this information to propose courses to meet these growing needs. While bioinformatics programs have traditionally trained students in data-intensive science, we identify areas of particular biological, computational and statistical emphasis important for this era that can be incorporated into existing curricula. For each area, we propose a course structured around these topics, which can be adapted in whole or in parts into existing curricula. In summary, specific challenges associated with big data provide an important opportunity to update existing curricula, but we do not foresee a wholesale redesign of bioinformatics training programs. PMID:25829469

A reliability program approach to operational safety

International Nuclear Information System (INIS)

Mueller, C.J.; Bezella, W.A.

1985-01-01

A Reliability Program (RP) model based on proven reliability techniques is being formulated for potential application in the nuclear power industry. Methods employed under NASA and military direction, commercial airline and related FAA programs were surveyed and a review of current nuclear risk-dominant issues conducted. The need for a reliability approach to address dependent system failures, operating and emergency procedures and human performance, and develop a plant-specific performance data base for safety decision making is demonstrated. Current research has concentrated on developing a Reliability Program approach for the operating phase of a nuclear plant's lifecycle. The approach incorporates performance monitoring and evaluation activities with dedicated tasks that integrate these activities with operation, surveillance, and maintenance of the plant. The detection, root-cause evaluation and before-the-fact correction of incipient or actual systems failures as a mechanism for maintaining plant safety is a major objective of the Reliability Program. (orig./HP)

Seismic safety margin assessment program (Annual safety research report, JFY 2010)

International Nuclear Information System (INIS)

Suzuki, Kenichi; Iijima, Toru; Inagaki, Masakatsu; Taoka, Hideto; Hidaka, Shinjiro

2011-01-01

Seismic capacity test data, analysis method and evaluation code provided by Seismic Safety Margin Assessment Program have been utilized for the support of seismic back-check evaluation of existing plants. The summary of the program in 2010 is as follows. 1. Component seismic capacity test and quantitative seismic capacity evaluation. Many seismic capacity tests of various snubbers were conducted and quantitative seismic capacities were evaluated. One of the emergency diesel generator partial-model seismic capacity tests was conducted and quantitative seismic capacity was evaluated. Some of the analytical evaluations of piping-system seismic capacities were conducted. 2. Analysis method for minute evaluation of component seismic response. The difference of seismic response of large components such as primary containment vessel and reactor pressure vessel when they were coupled with 3-dimensional FEM building model or 1-dimensional lumped mass building model, was quantitatively evaluated. 3. Evaluation code for quantitative evaluation of seismic safety margin of systems, structures and components. As the example, quantitative evaluation of seismic safety margin of systems, structures and components were conducted for the reference plant. (author)

Status report of the US Department of Energy's International Nuclear Safety Program

International Nuclear Information System (INIS)

1994-12-01

The US Department of Energy (DOE) implements the US Government's International Nuclear Safety Program to improve the level of safety at Soviet-designed nuclear power plants in Central and Eastern Europe, Russia, and Unkraine. The program is conducted consistent with guidance and policies established by the US Department of State (DOS) and the Agency for International Development and in close collaboration with the Nuclear Regulatory Commission. Some of the program elements were initiated in 1990 under a bilateral agreement with the former Soviet Union; however, most activities began after the Lisbon Nuclear Safety Initiative was announced by the DOS in 1992. Within DOE, the program is managed by the International Division of the Office of Nuclear Energy. The overall objective of the International Nuclear Safety Program is to make comprehensive improvements in the physical conditions of the power plants, plant operations, infrastructures, and safety cultures of countries operating Soviet-designed reactors. This status report summarizes the Internatioal Nuclear Safety Program's activities that have been completed as of September 1994 and discusses those activities currently in progress

Big Math for Little Kids

Science.gov (United States)

Greenes, Carole; Ginsburg, Herbert P.; Balfanz, Robert

2004-01-01

"Big Math for Little Kids," a comprehensive program for 4- and 5-year-olds, develops and expands on the mathematics that children know and are capable of doing. The program uses activities and stories to develop ideas about number, shape, pattern, logical reasoning, measurement, operations on numbers, and space. The activities introduce the…

NASA's Big Data Task Force

Science.gov (United States)

Holmes, C. P.; Kinter, J. L.; Beebe, R. F.; Feigelson, E.; Hurlburt, N. E.; Mentzel, C.; Smith, G.; Tino, C.; Walker, R. J.

2017-12-01

Two years ago NASA established the Ad Hoc Big Data Task Force (BDTF - https://science.nasa.gov/science-committee/subcommittees/big-data-task-force), an advisory working group with the NASA Advisory Council system. The scope of the Task Force included all NASA Big Data programs, projects, missions, and activities. The Task Force focused on such topics as exploring the existing and planned evolution of NASA's science data cyber-infrastructure that supports broad access to data repositories for NASA Science Mission Directorate missions; best practices within NASA, other Federal agencies, private industry and research institutions; and Federal initiatives related to big data and data access. The BDTF has completed its two-year term and produced several recommendations plus four white papers for NASA's Science Mission Directorate. This presentation will discuss the activities and results of the TF including summaries of key points from its focused study topics. The paper serves as an introduction to the papers following in this ESSI session.

Correlation between safety climate and contractor safety assessment programs in construction.

Science.gov (United States)

Sparer, Emily H; Murphy, Lauren A; Taylor, Kathryn M; Dennerlein, Jack T

2013-12-01

Contractor safety assessment programs (CSAPs) measure safety performance by integrating multiple data sources together; however, the relationship between these measures of safety performance and safety climate within the construction industry is unknown. Four hundred and one construction workers employed by 68 companies on 26 sites and 11 safety managers employed by 11 companies completed brief surveys containing a nine-item safety climate scale developed for the construction industry. CSAP scores from ConstructSecure, Inc., an online CSAP database, classified these 68 companies as high or low scorers, with the median score of the sample population as the threshold. Spearman rank correlations evaluated the association between the CSAP score and the safety climate score at the individual level, as well as with various grouping methodologies. In addition, Spearman correlations evaluated the comparison between manager-assessed safety climate and worker-assessed safety climate. There were no statistically significant differences between safety climate scores reported by workers in the high and low CSAP groups. There were, at best, weak correlations between workers' safety climate scores and the company CSAP scores, with marginal statistical significance with two groupings of the data. There were also no significant differences between the manager-assessed safety climate and the worker-assessed safety climate scores. A CSAP safety performance score does not appear to capture safety climate, as measured in this study. The nature of safety climate in construction is complex, which may be reflective of the challenges in measuring safety climate within this industry. Am. J. Ind. Med. 56:1463-1472, 2013. © 2013 Wiley Periodicals, Inc. © 2013 Wiley Periodicals, Inc.

Safety evaluation of large ventilation networks

International Nuclear Information System (INIS)

Barrocas, M.; Pruchon, P.; Robin, J.P.; Rouyer, J.L.; Salmon, P.

1981-01-01

For large ventilation networks, it is necessary to make a safety evaluation of their responses to perturbations such as blower failure, unexpected transfers, local pressurization. This evaluation is not easy to perform because of the many interrelationships between the different parts of the networks, interrelationships coming from the circulations of workers and matetials between cells and rooms and from the usefulness of air transfers through zones of different classifications. This evaluation is all the more necessary since new imperatives in energy savings push for minimizing the air flows, which tends to render the network more sensitive to perturbations. A program to evaluate safety has been developed by the Service de Protection Technique in cooperation with operators and designers of big nuclear facilities and the first applications presented here show the weak points of the installation studied from the safety view point

41 CFR 128-1.8009 - Review of Seismic Safety Program.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Review of Seismic Safety Program. 128-1.8009 Section 128-1.8009 Public Contracts and Property Management Federal Property Management Regulations System (Continued) DEPARTMENT OF JUSTICE 1-INTRODUCTION 1.80-Seismic Safety Program...

Probabilistic studies for a safety assurance program

International Nuclear Information System (INIS)

Iyer, S.S.; Davis, J.F.

1985-01-01

The adequate supply of energy is always a matter of concern for any country. Nuclear power has played, and will continue to play an important role in supplying this energy. However, safety in nuclear power production is a fundamental prerequisite in fulfilling this role. This paper outlines a program to ensure safe operation of a nuclear power plant utilizing the Probabilistic Safety Studies

Survey of Cyber Crime in Big Data

Science.gov (United States)

Rajeswari, C.; Soni, Krishna; Tandon, Rajat

2017-11-01

Big data is like performing computation operations and database operations for large amounts of data, automatically from the data possessor’s business. Since a critical strategic offer of big data access to information from numerous and various areas, security and protection will assume an imperative part in big data research and innovation. The limits of standard IT security practices are notable, with the goal that they can utilize programming sending to utilize programming designers to incorporate pernicious programming in a genuine and developing risk in applications and working frameworks, which are troublesome. The impact gets speedier than big data. In this way, one central issue is that security and protection innovation are sufficient to share controlled affirmation for countless direct get to. For powerful utilization of extensive information, it should be approved to get to the information of that space or whatever other area from a space. For a long time, dependable framework improvement has arranged a rich arrangement of demonstrated ideas of demonstrated security to bargain to a great extent with the decided adversaries, however this procedure has been to a great extent underestimated as “needless excess” and sellers In this discourse, essential talks will be examined for substantial information to exploit this develop security and protection innovation, while the rest of the exploration difficulties will be investigated.

Overview of the Nuclear Regulatory Commission's safety research program

International Nuclear Information System (INIS)

Beckjord, E.S.

1989-01-01

Accomplishments during 1988 of the Office of Nuclear Regulatory Research and the program of safety research are highlighted, and plans, expections, and needs of the next year and beyond are discussed. Topics discussed include: ECCS Appendix K Revision; pressurized thermal shock; NUREG-1150, or the PRA method performance document; resolution of station blackout; severe accident integration plan; nuclear safety research review committee; and program management

Guidance for implementing an environmental, safety, and health-assurance program. Volume 15. A model plan for line organization environmental, safety, and health-assurance programs

Energy Technology Data Exchange (ETDEWEB)

Ellingson, A.C.; Trauth, C.A. Jr.

1982-01-01

This is 1 of 15 documents designed to illustrate how an Environmental, Safety and Health (ES and H) Assurance Program may be implemented. The generic definition of ES and H Assurance Programs is given in a companion document entitled An Environmental, Safety and Health Assurance Program Standard. This particular document presents a model operational-level ES and H Assurance Program that may be used as a guide by an operational-level organization in developing its own plan. The model presented here reflects the guidance given in the total series of 15 documents.

Canadian Nuclear Safety Commission's intern program

International Nuclear Information System (INIS)

Gilmour, P.E.

2002-01-01

The Intern Program was introduced at the Canadian Nuclear Safety Commission, Canada's Nuclear Regulator in response to the current competitive market for engineers and scientists and the CNSC's aging workforce. It is an entry level staff development program designed to recruit and train new engineering and science graduates to eventually regulate Canada's nuclear industry. The program provides meaningful work experience and exposes the interns to the general work activities of the Commission. It also provides them with a broad awareness of the regulatory issues in which the CNSC is involved. The intern program is a two-year program focusing on the operational areas and, more specifically, on the generalist functions of project officers. (author)

Is big data risk assessment a novelty?

NARCIS (Netherlands)

Swuste, P.H.J.J.

2016-01-01

Objective: What metaphors, models and theories were developed in the safety science domain? And which research was based upon ‘big data’? Method: The study was confined to original articles and documents, written in English or Dutch from the period under consideration. Results and conclusions: From

Big Data: Are Biomedical and Health Informatics Training Programs Ready? Contribution of the IMIA Working Group for Health and Medical Informatics Education.

Science.gov (United States)

Otero, P; Hersh, W; Jai Ganesh, A U

2014-08-15

The growing volume and diversity of health and biomedical data indicate that the era of Big Data has arrived for healthcare. This has many implications for informatics, not only in terms of implementing and evaluating information systems, but also for the work and training of informatics researchers and professionals. This article addresses the question: What do biomedical and health informaticians working in analytics and Big Data need to know? We hypothesize a set of skills that we hope will be discussed among academic and other informaticians. The set of skills includes: Programming - especially with data-oriented tools, such as SQL and statistical programming languages; Statistics - working knowledge to apply tools and techniques; Domain knowledge - depending on one's area of work, bioscience or health care; and Communication - being able to understand needs of people and organizations, and articulate results back to them. Biomedical and health informatics educational programs must introduce concepts of analytics, Big Data, and the underlying skills to use and apply them into their curricula. The development of new coursework should focus on those who will become experts, with training aiming to provide skills in "deep analytical talent" as well as those who need knowledge to support such individuals.

High-temperature gas-cooled reactor safety-reliability program plan

Energy Technology Data Exchange (ETDEWEB)

1981-03-01

The purpose of this document is to present a safety plan as part of an overall program plan for the design and development of the High Temperature Gas-Cooled Reactor (HTGR). This plan is intended to establish a logical framework for identifying the technology necessary to demonstrate that the requisite degree of public risk safety can be achieved economically. This plan provides a coherent system safety approach together with goals and success criterion as part of a unifying strategy for licensing a lead reactor plant in the near term. It is intended to provide guidance to program participants involved in producing a technology base for the HTGR that is fully responsive to safety consideration in the design, evaluation, licensing, public acceptance, and economic optimization of reactor systems.

Area Safety Program for the tokamak fusion test reactor (TFTR)

International Nuclear Information System (INIS)

Rappe, G.M.

1984-10-01

Overall the Area Safety Program has proved to be a very successful operation. There is no doubt that a safety program organized through line management is the best way to involve all personnel. Naturally, when the program was first started, there was some criticism and a certain resistance on the part of a few individuals to fully participate. However, once the program was underway and it could be seen that it was working to everyone's advantage, this reluctance disappeared and a spirit of full cooperation is now enjoyed. It is very important that for this success to continue there must be a two way flow of information, both from the Area Safety Coordinators up through line management, and from senior management, with decisions and answers, back down through the management chain with the utmost dispatch. As with all programs, there is still room for improvement. This program has started a review cycle with a view to streamlining certain areas and possibly increasing its scope in others

Lessons learned from the safety assistance program for soviet-designed reactors

International Nuclear Information System (INIS)

Steinberg, N.

1999-01-01

Two examples of nuclear power situation were compared in this conference paper - the situation in Lithuania and the situation in the Ukraine. Based on the examples mentioned, author conclude that the effectiveness of the Multi-National Safety Assistance Program for Soviet -Designed Reactors in a given recipient country does not depend, in practice, on engineering issues. The principal aspects that determine this effectiveness are: first, the level of safety culture in the country, beginning at the Governmental level but also at the level of the senior managers of nuclear power. The other important factor which contributes is the availability of a well-developed national program for upgrading NPP safety. The economical well-being of nuclear power and of the country as a whole also has a major effect on the effectiveness of the western technical assistance programs that are trying to upgrade reactor safety in a particular recipient country. And finally, international community should have well coordinated and well substantiated safety assistance program for specific country

Reactor safety research program. A description of current and planned reactor safety research sponsored by the Nuclear Regulatory Commission's Division of Reactor Safety Research

International Nuclear Information System (INIS)

1975-06-01

The reactor safety research program, sponsored by the Nuclear Regulatory Commission's Division of Reactor Safety Research, is described in terms of its program objectives, current status, and future plans. Elements of safety research work applicable to water reactors, fast reactors, and gas cooled reactors are presented together with brief descriptions of current and planned test facilities. (U.S.)

WE-H-BRB-02: Where Do We Stand in the Applications of Big Data in Radiation Oncology?

International Nuclear Information System (INIS)

Xing, L.

2016-01-01

Big Data in Radiation Oncology: (1) Overview of the NIH 2015 Big Data Workshop, (2) Where do we stand in the applications of big data in radiation oncology?, and (3) Learning Health Systems for Radiation Oncology: Needs and Challenges for Future Success The overriding goal of this trio panel of presentations is to improve awareness of the wide ranging opportunities for big data impact on patient quality care and enhancing potential for research and collaboration opportunities with NIH and a host of new big data initiatives. This presentation will also summarize the Big Data workshop that was held at the NIH Campus on August 13–14, 2015 and sponsored by AAPM, ASTRO, and NIH. The workshop included discussion of current Big Data cancer registry initiatives, safety and incident reporting systems, and other strategies that will have the greatest impact on radiation oncology research, quality assurance, safety, and outcomes analysis. Learning Objectives: To discuss current and future sources of big data for use in radiation oncology research To optimize our current data collection by adopting new strategies from outside radiation oncology To determine what new knowledge big data can provide for clinical decision support for personalized medicine L. Xing, NIH/NCI Google Inc.

WE-H-BRB-02: Where Do We Stand in the Applications of Big Data in Radiation Oncology?

Energy Technology Data Exchange (ETDEWEB)

Xing, L. [Stanford University School of Medicine (United States)

2016-06-15

Big Data in Radiation Oncology: (1) Overview of the NIH 2015 Big Data Workshop, (2) Where do we stand in the applications of big data in radiation oncology?, and (3) Learning Health Systems for Radiation Oncology: Needs and Challenges for Future Success The overriding goal of this trio panel of presentations is to improve awareness of the wide ranging opportunities for big data impact on patient quality care and enhancing potential for research and collaboration opportunities with NIH and a host of new big data initiatives. This presentation will also summarize the Big Data workshop that was held at the NIH Campus on August 13–14, 2015 and sponsored by AAPM, ASTRO, and NIH. The workshop included discussion of current Big Data cancer registry initiatives, safety and incident reporting systems, and other strategies that will have the greatest impact on radiation oncology research, quality assurance, safety, and outcomes analysis. Learning Objectives: To discuss current and future sources of big data for use in radiation oncology research To optimize our current data collection by adopting new strategies from outside radiation oncology To determine what new knowledge big data can provide for clinical decision support for personalized medicine L. Xing, NIH/NCI Google Inc.

Determining Safety Inspection Thresholds for Employee Incentives Programs on Construction Sites.

Science.gov (United States)

Sparer, Emily; Dennerlein, Jack

2013-01-01

The goal of this project was to evaluate approaches of determining the numerical value of a safety inspection score that would activate a reward in an employee safety incentive program. Safety inspections are a reflection of the physical working conditions at a construction site and provide a safety score that can be used in incentive programs to reward workers. Yet it is unclear what level of safety should be used when implementing this kind of program. This study explored five ways of grouping safety inspection data collected during 19 months at Harvard University-owned construction projects. Each approach grouped the data by one of the following: owner, general contractor, project, trade, or subcontractor. The median value for each grouping provided the threshold score. These five approaches were then applied to data from a completed project in order to calculate the frequency and distribution of rewards in a monthly safety incentive program. The application of each approach was evaluated qualitatively for consistency, competitiveness, attainability, and fairness. The owner-specific approach resulted in a threshold score of 96.3% and met all of the qualitative evaluation goals. It had the most competitive reward distribution (only 1/3 of the project duration) yet it was also attainable. By treating all workers equally and maintaining the same value throughout the project duration, this approach was fair and consistent. The owner-based approach for threshold determination can be used by owners or general contractors when creating leading indicator incentives programs and by researchers in future studies on incentive program effectiveness.

MedWatch, the FDA Safety Information and Adverse Event Reporting Program

Science.gov (United States)

... Reporting Program MedWatch: The FDA Safety Information and Adverse Event Reporting Program Share Tweet Linkedin Pin it ... approved information that can help patients avoid serious adverse events. Potential Signals of Serious Risks/New Safety ...

78 FR 66987 - Railroad Safety Technology Program Grant Program

Science.gov (United States)

2013-11-07

... carriers, railroad suppliers, and State and local governments for projects that have a public benefit of... projects . . . that have a public benefit of improved safety and network efficiency.'' To be eligible for... million. This grant program has a maximum 80-percent Federal and minimum 20-percent grantee cost share...

Water reactor safety research program. A description of current and planned research

International Nuclear Information System (INIS)

1978-07-01

The U.S. Nuclear Regulatory Commission (NRC) sponsors confirmatory safety research on lightwater reactors in support of the NRC regulatory program. The principal responsibility of the NRC, as implemented through its regulatory program is to ensure that public health, public safety, and the environment are adequately protected. The NRC performs this function by defining conditions for the use of nuclear power and by ensuring through technical review, audit, and follow-up that these conditions are met. The NRC research program provides technical information, independent of the nuclear industry, to aid in discharging these regulatory responsibilities. The objectives of NRC's research program are the following: (1) to maintain a confirmatory research program that supports assurance of public health and safety, and public confidence in the regulatory program, (2) to provide objectively evaluated safety data and analytical methods that meet the needs of regulatory activities, (3) to provide better quantified estimates of the margins of safety for reactor systems, fuel cycle facilities, and transportation systems, (4) to establish a broad and coherent exchange of safety research information with other Federal agencies, industry, and foreign organization. Current and planned research toward these goals is described

Development of nuclear safety issues program

Energy Technology Data Exchange (ETDEWEB)

Cho, J. C.; Yoo, S. O.; Yoon, Y. K.; Kim, H. J.; Jeong, M. J.; Noh, K. W.; Kang, D. K

2006-12-15

The nuclear safety issues are defined as the cases which affect the design and operation safety of nuclear power plants and also require the resolution action. The nuclear safety issues program (NSIP) which deals with the overall procedural requirements for the nuclear safety issues management process is developed, in accordance with the request of the scientific resolution researches and the establishment/application of the nuclear safety issues management system for the nuclear power plants under design, construction or operation. The NSIP consists of the following 4 steps; - Step 1 : Collection of candidates for nuclear safety issues - Step 2 : Identification of nuclear safety issues - Step 3 : Categorization and resolution of nuclear safety issues - Step 4 : Implementation, verification and closure The NSIP will be applied to the management directives of KINS related to the nuclear safety issues. Through the identification of the nuclear safety issues which may be related to the potential for accident/incidents at operating nuclear power plants either directly or indirectly, followed by performance of regulatory researches to resolve the safety issues, it will be possible to prevent occurrence of accidents/incidents as well as to cope with unexpected accidents/incidents by analyzing the root causes timely and scientifically and by establishing the proper flow-up or remedied regulatory actions. Moreover, the identification and resolution of the safety issues related to the new nuclear power plants completed at the design stage are also expected to make the new reactor licensing reviews effective and efficient as well as to make the possibility of accidents/incidents occurrence minimize. Therefore, the NSIP developed in this study is expected to contribute for the enhancement of the safety of nuclear power plants.

Development of nuclear safety issues program

International Nuclear Information System (INIS)

Cho, J. C.; Yoo, S. O.; Yoon, Y. K.; Kim, H. J.; Jeong, M. J.; Noh, K. W.; Kang, D. K.

2006-12-01

The nuclear safety issues are defined as the cases which affect the design and operation safety of nuclear power plants and also require the resolution action. The nuclear safety issues program (NSIP) which deals with the overall procedural requirements for the nuclear safety issues management process is developed, in accordance with the request of the scientific resolution researches and the establishment/application of the nuclear safety issues management system for the nuclear power plants under design, construction or operation. The NSIP consists of the following 4 steps; - Step 1 : Collection of candidates for nuclear safety issues - Step 2 : Identification of nuclear safety issues - Step 3 : Categorization and resolution of nuclear safety issues - Step 4 : Implementation, verification and closure The NSIP will be applied to the management directives of KINS related to the nuclear safety issues. Through the identification of the nuclear safety issues which may be related to the potential for accident/incidents at operating nuclear power plants either directly or indirectly, followed by performance of regulatory researches to resolve the safety issues, it will be possible to prevent occurrence of accidents/incidents as well as to cope with unexpected accidents/incidents by analyzing the root causes timely and scientifically and by establishing the proper flow-up or remedied regulatory actions. Moreover, the identification and resolution of the safety issues related to the new nuclear power plants completed at the design stage are also expected to make the new reactor licensing reviews effective and efficient as well as to make the possibility of accidents/incidents occurrence minimize. Therefore, the NSIP developed in this study is expected to contribute for the enhancement of the safety of nuclear power plants

Electronuclear's safety culture assessment and enhancement program

International Nuclear Information System (INIS)

Selvatici, E.; Diaz-Francisco, J.M.; Diniz de Souza, V.

2002-01-01

The present paper describes the Eletronuclear's safety culture assessment and enhancement program. The program was launched by the company's top management one year after the creation of Eletronuclear in 1997, from the merging of two companies with different organizational cultures, the design and engineering company Nuclen and the nuclear directorate of the Utility Furnas, Operator of the Angra1 NPP. The program consisted of an assessment performed internally in 1999 with the support and advice of the IAEA. This assessment, performed with the help of a survey, pooled about 80% of the company's employees. The overall result of the assessment was that a satisfactory level of safety culture existed; however, a number of points with a considerable margin for improvement were also identified. These points were mostly related with behavioural matters such as motivation, stress in the workplace, view of mistakes, handling of conflicts, and last but not least a view by a considerable number of employees that a conflict between safety and production might exist. An Action Plan was established by the company managers to tackle these weak points. This Plan was issued as company guideline by the company's Directorate. The subsequent step was to detail and implement the different actions of the Plan, which is the phase that we are at present. In the detailing of the Action Plan, special care was taken to sum up efforts, avoiding duplication of work or competition with already existing programs. In this process it was identified that the company had a considerable number of initiatives directly related to organizational and safety culture improvement, already operational. These initiatives have been integrated in the detailed Action Plan. A new assessment, for checking the effectiveness of the undertaken actions, is planned for 2003. (author)

Applying health education theory to patient safety programs: three case studies.

Science.gov (United States)

Gilkey, Melissa B; Earp, Jo Anne L; French, Elizabeth A

2008-04-01

Program planning for patient safety is challenging because intervention-oriented surveillance data are not yet widely available to those working in this nascent field. Even so, health educators are uniquely positioned to contribute to patient safety intervention efforts because their theoretical training provides them with a guide for designing and implementing prevention programs. This article demonstrates the utility of applying health education concepts from three prominent patient safety campaigns, including the concepts of risk perception, community participation, and social marketing. The application of these theoretical concepts to patient safety programs suggests that health educators possess a knowledge base and skill set highly relevant to patient safety and that their perspective should be increasingly brought to bear on the design and evaluation of interventions that aim to protect patients from preventable medical error.

Effect of generic issues program on improving safety

International Nuclear Information System (INIS)

Fard, M. R.; Kauffman, J. V.

2010-01-01

The U.S. Nuclear Regulatory Commission (NRC) identifies (by its assessment of plant operation) certain issues involving public health and safety, the common defense and security, or the environment that could affect multiple entities under NRC jurisdiction. The Generic Issues Program (GIP) addresses the resolution of these Generic Issues (GIs). The resolution of these issues may involve new or revised rules, new or revised guidance, or revised interpretation of rules or guidance that affect nuclear power plant licensees, nuclear material certificate holders, or holders of other regulatory approvals. U.S. NRC provides information related to the past and ongoing GIP activities to the general public by the use of three main resources, namely NUREG-0933, 'Resolution of Generic Safety Issues, ' Generic Issues Management Control System (GIMCS), and GIP public web page. GIP information resources provide information such as historical information on resolved GIs, current status of the open GIs, policy documents, program procedures, GIP annual and quarterly reports and the process to contact GIP and propose a GI This paper provides an overview of the GIP and several examples of safety improvements resulting from the resolution of GIs. In addition, the paper provides a brief discussion of a few recent GIs to illustrate how the program functions to improve safety. (authors)

Development and implementation of a hospital-based patient safety program

International Nuclear Information System (INIS)

Frush, Karen S.; Alton, Michael; Frush, Donald P.

2006-01-01

Evidence from numerous studies indicates that large numbers of patients are harmed by medical errors while receiving health-care services in the United States today. The 1999 Institute of Medicine report on medical errors recommended that hospitals and health-care agencies ''establish safety programs to act as a catalyst for the development of a culture of safety'' [1]. In this article, we describe one approach to successful implementation of a hospital-based patient safety program. Although our experience at Duke University Health System will be used as an example, the needs, principles, and solutions can apply to a variety of other health-care practices. Key components include the development of safety teams, provision of tools that teams can use to support an environment of safety, and ongoing program modification to meet patient and staff needs and respond to changing priorities. By moving patient safety to the forefront of all that we do as health-care providers, we can continue to improve our delivery of health care to children and adults alike. This improvement is fostered when we enhance the culture of safety, develop a constant awareness of the possibility of human and system errors in the delivery of care, and establish additional safeguards to intercept medical errors in order to prevent harm to patients. (orig.)

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

Big Data-Survey

Directory of Open Access Journals (Sweden)

P.S.G. Aruna Sri

2016-03-01

Full Text Available Big data is the term for any gathering of information sets, so expensive and complex, that it gets to be hard to process for utilizing customary information handling applications. The difficulties incorporate investigation, catch, duration, inquiry, sharing, stockpiling, Exchange, perception, and protection infringement. To reduce spot business patterns, anticipate diseases, conflict etc., we require bigger data sets when compared with the smaller data sets. Enormous information is hard to work with utilizing most social database administration frameworks and desktop measurements and perception bundles, needing rather enormously parallel programming running on tens, hundreds, or even a large number of servers. In this paper there was an observation on Hadoop architecture, different tools used for big data and its security issues.

FMCSA safety program effectiveness measurement : Roadside Intervention Effectiveness Model, fiscal year 2010 : [analysis brief].

Science.gov (United States)

2014-11-01

Two of the Federal Motor Carrier Safety Administrations (FMCSAs) key safety programs are the Roadside Inspection and Traffic Enforcement programs. The Roadside Inspection program consists of roadside inspections performed by qualified safety in...

Big Data Risk Analysis for Rail Safety?

OpenAIRE

Van Gulijk, Coen; Hughes, Peter; Figueres-Esteban, Miguel; Dacre, Marcus; Harrison, Chris; HUD; RSSB

2015-01-01

Computer scientists believe that the enormous amounts of data in the internet will unchain a management revolution of uncanny proportions. Yet, to date, the potential benefit of this revolution is scantily investigated for safety and risk management. This paper gives a brief overview of a research programme that investigates how the new internet-driven data-revolution could benefit safety and risk management for railway safety in the UK. The paper gives a brief overview the current activities...

Management Oversight and Risk Tree (MORT): a new system safety program

International Nuclear Information System (INIS)

Clark, J.L.

Experiences of Aerojet Nuclear Company (ANC), in the development and implementation of a system safety program for ANC and for the Energy Research and Development Administration (ERDA) are discussed. Aerojet Nuclear is the prime operating contractor for ERDA, formerly AEC, at the Idaho National Engineering Laboratory. The ERDA sponsored ''MORT'' system safety program is described along with the process whereby formal system safety methods are incorporated into a stable organization. Specifically, a discussion is given of initial development of MORT; pilot program trials conducted at ANC; implementation methodology; and reaction of the ANC organization. (auth)

Large scale and big data processing and management

CERN Document Server

Sakr, Sherif

2014-01-01

Large Scale and Big Data: Processing and Management provides readers with a central source of reference on the data management techniques currently available for large-scale data processing. Presenting chapters written by leading researchers, academics, and practitioners, it addresses the fundamental challenges associated with Big Data processing tools and techniques across a range of computing environments.The book begins by discussing the basic concepts and tools of large-scale Big Data processing and cloud computing. It also provides an overview of different programming models and cloud-bas

FMCSA safety program effectiveness measurement : Roadside Intervention Effectiveness Model FY 2012, [analysis brief].

Science.gov (United States)

2016-02-01

Roadside Inspection and Traffic Enforcement are two of : the Federal Motor Carrier Safety Administrations : (FMCSAs) key safety programs. The Roadside : Inspection Program consists of roadside inspections : performed by qualified safety inspect...

Radiation safety program in a high dose rate brachytherapy facility

International Nuclear Information System (INIS)

Rodriguez, L.V.; Hermoso, T.M.; Solis, R.C.

2001-01-01

The use of remote afterloading equipment has been developed to improve radiation safety in the delivery of treatment in brachytherapy. Several accidents, however, have been reported involving high dose-rate brachytherapy system. These events, together with the desire to address the concerns of radiation workers, and the anticipated adoption of the International Basic Safety Standards for Protection Against Ionizing Radiation (IAEA, 1996), led to the development of the radiation safety program at the Department of Radiotherapy, Jose R. Reyes Memorial Medical Center and at the Division of Radiation Oncology, St. Luke's Medical Center. The radiation safety program covers five major aspects: quality control/quality assurance, radiation monitoring, preventive maintenance, administrative measures and quality audit. Measures for evaluation of effectiveness of the program include decreased unnecessary exposures of patients and staff, improved accuracy in treatment delivery and increased department efficiency due to the development of staff vigilance and decreased anxiety. The success in the implementation required the participation and cooperation of all the personnel involved in the procedures and strong management support. This paper will discuss the radiation safety program for a high dose rate brachytherapy facility developed at these two institutes which may serve as a guideline for other hospitals intending to install a similar facility. (author)

FMCSA safety program effectiveness measurement : roadside intervention effectiveness model FY 2011 : [analysis brief].

Science.gov (United States)

2015-06-01

Roadside Inspection and Traffic Enforcement are two of the Federal Motor Carrier Safety Administrations (FMCSAs) key safety programs. The Roadside Inspection program consists of roadside inspections performed by qualified safety inspectors. The...

Adapting bioinformatics curricula for big data.

Science.gov (United States)

Greene, Anna C; Giffin, Kristine A; Greene, Casey S; Moore, Jason H

2016-01-01

Modern technologies are capable of generating enormous amounts of data that measure complex biological systems. Computational biologists and bioinformatics scientists are increasingly being asked to use these data to reveal key systems-level properties. We review the extent to which curricula are changing in the era of big data. We identify key competencies that scientists dealing with big data are expected to possess across fields, and we use this information to propose courses to meet these growing needs. While bioinformatics programs have traditionally trained students in data-intensive science, we identify areas of particular biological, computational and statistical emphasis important for this era that can be incorporated into existing curricula. For each area, we propose a course structured around these topics, which can be adapted in whole or in parts into existing curricula. In summary, specific challenges associated with big data provide an important opportunity to update existing curricula, but we do not foresee a wholesale redesign of bioinformatics training programs. © The Author 2015. Published by Oxford University Press.

Occupational Safety and Health Program at the West Valley Demonstration Project

International Nuclear Information System (INIS)

L. M. Calderon

1999-01-01

The West Valley Nuclear Services Co. LLC (WVNS) is committed to provide a safe, clean, working environment for employees, and to implement U.S. Department of Energy (DOE) requirements affecting worker safety. The West Valley Demonstration Project (WVDP) Occupational Safety and Health Program is designed to protect the safety, health, and well-being of WVDP employees by identifying, evaluating, and controlling biological, chemical, and physical hazards in the work place. Hazards are controlled within the requirements set forth in the reference section at the end of this report. It is the intent of the WVDP Occupational Safety and Health Program to assure that each employee is provided with a safe and healthy work environment. This report shows the logical path toward ensuring employee safety in planning work at the WVDP. In general, planning work to be performed safely includes: combining requirements from specific programs such as occupational safety, industrial hygiene, radiological control, nuclear safety, fire safety, environmental protection, etc.; including WVDP employees in the safety decision-making processes; pre-planning using safety support re-sources; and integrating the safety processes into the work instructions. Safety management principles help to define the path forward for the WVDP Occupational Safety and Health Program. Roles, responsibilities, and authority of personnel stem from these ideals. WVNS and its subcontractors are guided by the following fundamental safety management principles: ''Protection of the environment, workers, and the public is the highest priority. The safety and well-being of our employees, the public, and the environment must never be compromised in the aggressive pursuit of results and accomplishment of work product. A graded approach to environment, safety, and health in design, construction, operation, maintenance, and deactivation is incorporated to ensure the protection of the workers, the public, and the environment

The effectiveness of a bicycle safety program for improving safety-related knowledge and behavior in young elementary students.

Science.gov (United States)

McLaughlin, Karen A; Glang, Ann

2010-05-01

The purpose of this study was to evaluate the "Bike Smart" program, an eHealth software program that teaches bicycle safety behaviors to young children. Participants were 206 elementary students in grades kindergarten to 3. A random control design was employed to evaluate the program, with students assigned to either the treatment condition (Bike Smart) or the control condition (a video on childhood safety). Outcome measures included computer-based knowledge items (safety rules, helmet placement, hazard discrimination) and a behavioral measure of helmet placement. Results demonstrated that regardless of gender, cohort, and grade the participants in the treatment group showed greater gains than control participants in both the computer-presented knowledge items (p > .01) and the observational helmet measure (p > .05). Findings suggest that the Bike Smart program can be a low cost, effective component of safety training packages that include both skills-based and experiential training.

Findings From the National Machine Guarding Program-A Small Business Intervention: Machine Safety.

Science.gov (United States)

Parker, David L; Yamin, Samuel C; Xi, Min; Brosseau, Lisa M; Gordon, Robert; Most, Ivan G; Stanley, Rodney

2016-09-01

The purpose of this nationwide intervention was to improve machine safety in small metal fabrication businesses (3 to 150 employees). The failure to implement machine safety programs related to guarding and lockout/tagout (LOTO) are frequent causes of Occupational Safety and Health Administration (OSHA) citations and may result in serious traumatic injury. Insurance safety consultants conducted a standardized evaluation of machine guarding, safety programs, and LOTO. Businesses received a baseline evaluation, two intervention visits, and a 12-month follow-up evaluation. The intervention was completed by 160 businesses. Adding a safety committee was associated with a 10% point increase in business-level machine scores (P increase in LOTO program scores (P < 0.0001). Insurance safety consultants proved effective at disseminating a machine safety and LOTO intervention via management-employee safety committees.

Analyzing Big Data in Psychology: A Split/Analyze/Meta-Analyze Approach

Directory of Open Access Journals (Sweden)

Mike W.-L. Cheung

2016-05-01

Full Text Available Big data is a field that has traditionally been dominated by disciplines such as computer science and business, where mainly data-driven analyses have been performed. Psychology, a discipline in which a strong emphasis is placed on behavioral theories and empirical research, has the potential to contribute greatly to the big data movement. However, one challenge to psychologists – and probably the most crucial one – is that most researchers may not have the necessary programming and computational skills to analyze big data. In this study we argue that psychologists can also conduct big data research and that, rather than trying to acquire new programming and computational skills, they should focus on their strengths, such as performing psychometric analyses and testing theories using multivariate analyses to explain phenomena. We propose a split/analyze/meta-analyze approach that allows psychologists to easily analyze big data. Two real datasets are used to demonstrate the proposed procedures in R. A new research agenda related to the analysis of big data in psychology is outlined at the end of the study.

Analyzing Big Data in Psychology: A Split/Analyze/Meta-Analyze Approach.

Science.gov (United States)

Cheung, Mike W-L; Jak, Suzanne

2016-01-01

Big data is a field that has traditionally been dominated by disciplines such as computer science and business, where mainly data-driven analyses have been performed. Psychology, a discipline in which a strong emphasis is placed on behavioral theories and empirical research, has the potential to contribute greatly to the big data movement. However, one challenge to psychologists-and probably the most crucial one-is that most researchers may not have the necessary programming and computational skills to analyze big data. In this study we argue that psychologists can also conduct big data research and that, rather than trying to acquire new programming and computational skills, they should focus on their strengths, such as performing psychometric analyses and testing theories using multivariate analyses to explain phenomena. We propose a split/analyze/meta-analyze approach that allows psychologists to easily analyze big data. Two real datasets are used to demonstrate the proposed procedures in R. A new research agenda related to the analysis of big data in psychology is outlined at the end of the study.

Epidemiology in the Era of Big Data

Science.gov (United States)

Mooney, Stephen J; Westreich, Daniel J; El-Sayed, Abdulrahman M

2015-01-01

Big Data has increasingly been promoted as a revolutionary development in the future of science, including epidemiology. However, the definition and implications of Big Data for epidemiology remain unclear. We here provide a working definition of Big Data predicated on the so-called ‘3 Vs’: variety, volume, and velocity. From this definition, we argue that Big Data has evolutionary and revolutionary implications for identifying and intervening on the determinants of population health. We suggest that as more sources of diverse data become publicly available, the ability to combine and refine these data to yield valid answers to epidemiologic questions will be invaluable. We conclude that, while epidemiology as practiced today will continue to be practiced in the Big Data future, a component of our field’s future value lies in integrating subject matter knowledge with increased technical savvy. Our training programs and our visions for future public health interventions should reflect this future. PMID:25756221

How Big Are "Martin's Big Words"? Thinking Big about the Future.

Science.gov (United States)

Gardner, Traci

"Martin's Big Words: The Life of Dr. Martin Luther King, Jr." tells of King's childhood determination to use "big words" through biographical information and quotations. In this lesson, students in grades 3 to 5 explore information on Dr. King to think about his "big" words, then they write about their own…

The Impact of a Patient Safety Program on Medical Error Reporting

Science.gov (United States)

2005-05-01

307 The Impact of a Patient Safety Program on Medical Error Reporting Donald R. Woolever Abstract Background: In response to the occurrence of...a sentinel event—a medical error with serious consequences—Eglin U.S. Air Force (USAF) Regional Hospital developed and implemented a patient safety...communication, teamwork, and reporting. Objective: To determine the impact of a patient safety program on patterns of medical error reporting. Methods: This

Big Data Provenance: Challenges, State of the Art and Opportunities.

Science.gov (United States)

Wang, Jianwu; Crawl, Daniel; Purawat, Shweta; Nguyen, Mai; Altintas, Ilkay

2015-01-01

Ability to track provenance is a key feature of scientific workflows to support data lineage and reproducibility. The challenges that are introduced by the volume, variety and velocity of Big Data, also pose related challenges for provenance and quality of Big Data, defined as veracity. The increasing size and variety of distributed Big Data provenance information bring new technical challenges and opportunities throughout the provenance lifecycle including recording, querying, sharing and utilization. This paper discusses the challenges and opportunities of Big Data provenance related to the veracity of the datasets themselves and the provenance of the analytical processes that analyze these datasets. It also explains our current efforts towards tracking and utilizing Big Data provenance using workflows as a programming model to analyze Big Data.

Processing Solutions for Big Data in Astronomy

Science.gov (United States)

Fillatre, L.; Lepiller, D.

2016-09-01

This paper gives a simple introduction to processing solutions applied to massive amounts of data. It proposes a general presentation of the Big Data paradigm. The Hadoop framework, which is considered as the pioneering processing solution for Big Data, is described together with YARN, the integrated Hadoop tool for resource allocation. This paper also presents the main tools for the management of both the storage (NoSQL solutions) and computing capacities (MapReduce parallel processing schema) of a cluster of machines. Finally, more recent processing solutions like Spark are discussed. Big Data frameworks are now able to run complex applications while keeping the programming simple and greatly improving the computing speed.

Commercial Crew Program Crew Safety Strategy

Science.gov (United States)

Vassberg, Nathan; Stover, Billy

2015-01-01

The purpose of this presentation is to explain to our international partners (ESA and JAXA) how NASA is implementing crew safety onto our commercial partners under the Commercial Crew Program. It will show them the overall strategy of 1) how crew safety boundaries have been established; 2) how Human Rating requirements have been flown down into programmatic requirements and over into contracts and partner requirements; 3) how CCP SMA has assessed CCP Certification and CoFR strategies against Shuttle baselines; 4) Discuss how Risk Based Assessment (RBA) and Shared Assurance is used to accomplish these strategies.

78 FR 14912 - International Aviation Safety Assessment (IASA) Program Change

Science.gov (United States)

2013-03-08

... Aviation Safety Assessment (IASA) Program Change AGENCY: Federal Aviation Administration (FAA), DOT. ACTION..., into the U.S., or codeshare with a U.S. air carrier, complies with international aviation safety... subject to that country's aviation safety oversight can serve the United States using its own aircraft or...

An overview of big data and data science education at South African universities

Directory of Open Access Journals (Sweden)

Eduan Kotzé

2016-02-01

Full Text Available Man and machine are generating data electronically at an astronomical speed and in such a way that society is experiencing cognitive challenges to analyse this data meaningfully. Big data firms, such as Google and Facebook, identified this problem several years ago and are continuously developing new technologies or improving existing technologies in order to facilitate the cognitive analysis process of these large data sets. The purpose of this article is to contribute to our theoretical understanding of the role that big data might play in creating new training opportunities for South African universities. The article investigates emerging literature on the characteristics and main components of big data, together with the Hadoop application stack as an example of big data technology. Due to the rapid development of big data technology, a paradigm shift of human resources is required to analyse these data sets; therefore, this study examines the state of big data teaching at South African universities. This article also provides an overview of possible big data sources for South African universities, as well as relevant big data skills that data scientists need. The study also investigates existing academic programs in South Africa, where the focus is on teaching advanced database systems. The study found that big data and data science topics are introduced to students on a postgraduate level, but that the scope is very limited. This article contributes by proposing important theoretical topics that could be introduced as part of the existing academic programs. More research is required, however, to expand these programs in order to meet the growing demand for data scientists with big data skills.

Nuclear power: safety and prospects

International Nuclear Information System (INIS)

Miniere, D.

2012-01-01

Despite the Fukushima accident new countries are willing to use nuclear power and as a nuclear accident somewhere is a nuclear accident everywhere, all countries are concerned with nuclear safety. A big association that would gather all the national Safety Authorities would be an efficient tool to promote and improve safety at the world scale and may be the unique available tool as no country would let a foreign authority to drive its own nuclear industry. An important lesson from Fukushima and Chernobyl accidents is that the signature of a big nuclear accident is not the number of casualties (it will always be limited) but the importance of the radioactive contamination. The question is how to make this long-term and long-range contamination impossible to happen, it is the mission of nuclear safety. (A.C.)

Evaluation of the Finnish nuclear safety research program 'SAFIR2010'

International Nuclear Information System (INIS)

2010-01-01

A panel of three members has been asked by the Ministry of Employment and the Economy (MEE) to evaluate SAFIR2010, the Finnish research program on nuclear power plant safety. The program was established for the period 2007-2010 to help maintain expertise in nuclear safety, to integrate young people into the research in order to help assure the future availability of expertise, and to support international collaborations. The program is directed by a Steering Group, appointed by MEE, with representatives from all organizations involved with nuclear safety in Finland. SAFIR2010 has consisted of approximately 30 projects from year to year that fall into eight subject areas: 1. Organization and human factors 2. Automation and control room 3. Fuel and reactor physics 4. Thermal hydraulics 5. Severe accidents 6. Structural safety of reactor circuit 7. Construction safety 8. Probabilistic safety analysis (PSA) For each of these areas there are Reference Groups that provide oversight of the projects within their jurisdiction. The panel carried out its evaluation by reviewing copies of relevant documents and, during a one-week period 17-22 January 2010, meeting with key individuals. The results of the panel are provided as general conclusions, responses to questions posed by MEE, challenges and recommendations and comments on specific projects in each subject area. The general conclusions reflect the panel's view that SAFIR2010 is meeting its objectives and carrying out quality research. The questions addressed are: (a.) Are the achieved results in balance with the funding? Are the results exploited efficiently in practice? (b.) How well does the expertise cover the field? Is the entire SAFIR2010 programme balanced to all different fields in nuclear safety? Does it raise efficiently new experts? (c.) Have the 2006 evaluation results been implemented successfully into SAFIR2010 program? (d.) Challenges and recommendations. In general the panel was very positive about SAFIR

Big Data, Big Problems: A Healthcare Perspective.

Science.gov (United States)

Househ, Mowafa S; Aldosari, Bakheet; Alanazi, Abdullah; Kushniruk, Andre W; Borycki, Elizabeth M

2017-01-01

Much has been written on the benefits of big data for healthcare such as improving patient outcomes, public health surveillance, and healthcare policy decisions. Over the past five years, Big Data, and the data sciences field in general, has been hyped as the "Holy Grail" for the healthcare industry promising a more efficient healthcare system with the promise of improved healthcare outcomes. However, more recently, healthcare researchers are exposing the potential and harmful effects Big Data can have on patient care associating it with increased medical costs, patient mortality, and misguided decision making by clinicians and healthcare policy makers. In this paper, we review the current Big Data trends with a specific focus on the inadvertent negative impacts that Big Data could have on healthcare, in general, and specifically, as it relates to patient and clinical care. Our study results show that although Big Data is built up to be as a the "Holy Grail" for healthcare, small data techniques using traditional statistical methods are, in many cases, more accurate and can lead to more improved healthcare outcomes than Big Data methods. In sum, Big Data for healthcare may cause more problems for the healthcare industry than solutions, and in short, when it comes to the use of data in healthcare, "size isn't everything."

Program of nuclear criticality safety experiment at JAERI

International Nuclear Information System (INIS)

Kobayashi, Iwao; Tachimori, Shoichi; Takeshita, Isao; Suzaki, Takenori; Ohnishi, Nobuaki

1983-11-01

JAERI is promoting the nuclear criticality safety research program, in which a new facility for criticality safety experiments (Criticality Safety Experimental Facility : CSEF) is to be built for the experiments with solution fuel. One of the experimental researches is to measure, collect and evaluate the experimental data needed for evaluation of criticality safety of the nuclear fuel cycle facilities. Another research area is a study of the phenomena themselves which are incidental to postulated critical accidents. Investigation of the scale and characteristics of the influences caused by the accident is also included in this research. The result of the conceptual design of CSEF is summarized in this report. (author)

Workplace safety and health programs, practices, and conditions in auto collision repair businesses.

Science.gov (United States)

Brosseau, L M; Bejan, A; Parker, D L; Skan, M; Xi, M

2014-01-01

This article describes the results of a pre-intervention safety assessment conducted in 49 auto collision repair businesses and owners' commitments to specific improvements. A 92-item standardized audit tool employed interviews, record reviews, and observations to assess safety and health programs, training, and workplace conditions. Owners were asked to improve at least one-third of incorrect, deficient, or missing (not in compliance with regulations or not meeting best practice) items, of which a majority were critical or highly important for ensuring workplace safety. Two-thirds of all items were present, with the highest fraction related to electrical safety, machine safety, and lockout/tagout. One-half of shops did not have written safety programs and had not conducted recent training. Many had deficiencies in respiratory protection programs and practices. Thirteen businesses with a current or past relationship with a safety consultant had a significantly higher fraction of correct items, in particular related to safety programs, up-to-date training, paint booth and mixing room conditions, electrical safety, and respiratory protection. Owners selected an average of 58% of recommended improvements; they were most likely to select items related to employee Right-to-Know training, emergency exits, fire extinguishers, and respiratory protection. They were least likely to say they would improve written safety programs, stop routine spraying outside the booth, or provide adequate fire protection for spray areas outside the booth. These baseline results suggest that it may be possible to bring about workplace improvements using targeted assistance from occupational health and safety professionals.

The BigBoss Experiment

Energy Technology Data Exchange (ETDEWEB)

Schelgel, D.; Abdalla, F.; Abraham, T.; Ahn, C.; Allende Prieto, C.; Annis, J.; Aubourg, E.; Azzaro, M.; Bailey, S.; Baltay, C.; Baugh, C.; Bebek, C.; Becerril, S.; Blanton, M.; Bolton, A.; Bromley, B.; Cahn, R.; Carton, P.-H.; Cervanted-Cota, J.L.; Chu, Y.; Cortes, M.; /APC, Paris /Brookhaven /IRFU, Saclay /Marseille, CPPM /Marseille, CPT /Durham U. / /IEU, Seoul /Fermilab /IAA, Granada /IAC, La Laguna / /IAC, Mexico / / /Madrid, IFT /Marseille, Lab. Astrophys. / / /New York U. /Valencia U.

2012-06-07

BigBOSS is a Stage IV ground-based dark energy experiment to study baryon acoustic oscillations (BAO) and the growth of structure with a wide-area galaxy and quasar redshift survey over 14,000 square degrees. It has been conditionally accepted by NOAO in response to a call for major new instrumentation and a high-impact science program for the 4-m Mayall telescope at Kitt Peak. The BigBOSS instrument is a robotically-actuated, fiber-fed spectrograph capable of taking 5000 simultaneous spectra over a wavelength range from 340 nm to 1060 nm, with a resolution R = {lambda}/{Delta}{lambda} = 3000-4800. Using data from imaging surveys that are already underway, spectroscopic targets are selected that trace the underlying dark matter distribution. In particular, targets include luminous red galaxies (LRGs) up to z = 1.0, extending the BOSS LRG survey in both redshift and survey area. To probe the universe out to even higher redshift, BigBOSS will target bright [OII] emission line galaxies (ELGs) up to z = 1.7. In total, 20 million galaxy redshifts are obtained to measure the BAO feature, trace the matter power spectrum at smaller scales, and detect redshift space distortions. BigBOSS will provide additional constraints on early dark energy and on the curvature of the universe by measuring the Ly-alpha forest in the spectra of over 600,000 2.2 < z < 3.5 quasars. BigBOSS galaxy BAO measurements combined with an analysis of the broadband power, including the Ly-alpha forest in BigBOSS quasar spectra, achieves a FOM of 395 with Planck plus Stage III priors. This FOM is based on conservative assumptions for the analysis of broad band power (k{sub max} = 0.15), and could grow to over 600 if current work allows us to push the analysis to higher wave numbers (k{sub max} = 0.3). BigBOSS will also place constraints on theories of modified gravity and inflation, and will measure the sum of neutrino masses to 0.024 eV accuracy.

Sanitation & Safety for Child Feeding Programs.

Science.gov (United States)

Florida State Dept. of Health and Rehabilitative Services, Tallahassee.

In the interest of promoting good health, sanitation, and safety practices in the operation of child feeding programs, this bulletin discusses practices in personal grooming and wearing apparel; the purchasing, storage, handling, and serving of food; sanitizing equipment and utensils; procedures to follow in case of a food poisoning outbreak; some…

Safety Critical Java for Robotics Programming

DEFF Research Database (Denmark)

Thomsen, Bent; Luckow, Kasper Søe; Bøgholm, Thomas

2015-01-01

This paper introduces Safety Critical Java (SCJ) and argues its readiness for robotics programming. We give an overview of the work done at Aalborg University and elsewhere on SCJl, some of its implementations in the form of the JOP, FijiVM and HVM and some of the tools, especially WCA, Teta...

National Machine Guarding Program: Part 2. Safety management in small metal fabrication enterprises.

Science.gov (United States)

Parker, David L; Yamin, Samuel C; Brosseau, Lisa M; Xi, Min; Gordon, Robert; Most, Ivan G; Stanley, Rodney

2015-11-01

Small manufacturing businesses often lack important safety programs. Many reasons have been set forth on why this has remained a persistent problem. The National Machine Guarding Program (NMGP) was a nationwide intervention conducted in partnership with two workers' compensation insurers. Insurance safety consultants collected baseline data in 221 business using a 33-question safety management audit. Audits were completed during an interview with the business owner or manager. Most measures of safety management improved with an increasing number of employees. This trend was particularly strong for lockout/tagout. However, size was only significant for businesses without a safety committee. Establishments with a safety committee scored higher (55% vs. 36%) on the safety management audit compared with those lacking a committee (P < 0.0001). Critical safety management programs were frequently absent. A safety committee appears to be a more important factor than business size in accounting for differences in outcome measures. © 2015 The Authors. American Journal of Industrial Medicine Published by Wiley Periodicals, Inc.

Multidisciplinary training program to create new breed of radiation monitor: the health and safety technician

International Nuclear Information System (INIS)

Vance, W.F.

1979-01-01

A multidiscipline training program established to create a new monitor, theHealth and Safety Technician, is described. The training program includes instruction in fire safety, explosives safety, industrial hygiene, industrial safety, health physics, and general safety practices

Big Surveys, Big Data Centres

Science.gov (United States)

Schade, D.

2016-06-01

Well-designed astronomical surveys are powerful and have consistently been keystones of scientific progress. The Byurakan Surveys using a Schmidt telescope with an objective prism produced a list of about 3000 UV-excess Markarian galaxies but these objects have stimulated an enormous amount of further study and appear in over 16,000 publications. The CFHT Legacy Surveys used a wide-field imager to cover thousands of square degrees and those surveys are mentioned in over 1100 publications since 2002. Both ground and space-based astronomy have been increasing their investments in survey work. Survey instrumentation strives toward fair samples and large sky coverage and therefore strives to produce massive datasets. Thus we are faced with the "big data" problem in astronomy. Survey datasets require specialized approaches to data management. Big data places additional challenging requirements for data management. If the term "big data" is defined as data collections that are too large to move then there are profound implications for the infrastructure that supports big data science. The current model of data centres is obsolete. In the era of big data the central problem is how to create architectures that effectively manage the relationship between data collections, networks, processing capabilities, and software, given the science requirements of the projects that need to be executed. A stand alone data silo cannot support big data science. I'll describe the current efforts of the Canadian community to deal with this situation and our successes and failures. I'll talk about how we are planning in the next decade to try to create a workable and adaptable solution to support big data science.

Recht voor big data, big data voor recht

NARCIS (Netherlands)

Lafarre, Anne

Big data is een niet meer weg te denken fenomeen in onze maatschappij. Het is de hype cycle voorbij en de eerste implementaties van big data-technieken worden uitgevoerd. Maar wat is nu precies big data? Wat houden de vijf V's in die vaak genoemd worden in relatie tot big data? Ter inleiding van

Environment Health & Safety Research Program. Organization and 1979-1980 Publications

Energy Technology Data Exchange (ETDEWEB)

None

1981-01-01

This document was prepared to assist readers in understanding the organization of Pacific Northwest Laboratory, and the organization and functions of the Environment, Health and Safety Research Program Office. Telephone numbers of the principal management staff are provided. Also included is a list of 1979 and 1980 publications reporting on work performed in the Environment, Health and Safety Research Program, as well as a list of papers submitted for publication.

Fusion-Reactor-Safety Research Program. Annual report, Fiscal Year 1981

International Nuclear Information System (INIS)

Crocker, J.G.; Cohen, S.

1982-07-01

The report contains four sections: Outside Contracts includes the continuation of the General Atomic Co. low-activation materials safety study, water-cooled transport activation products study by Pacific Northwest Laboratory (PNL), studies of superconducting magnet safety conducted by Argonne National Laboratory (ANL) coupled with a new experimental superconducting magnet study program by Massachusetts Institute of Technology (MIT) to verify analytical work, a continuation of safety methodology work by MIT, portions of papers on lithium safety studies conducted at Hanford Engineering Development Laboratory (HEDL), and a new program to study tritium gas conversion to tritiated water at Oak Ridge National Laboratory (ORNL). The section EG and G idaho, Inc., Activities at INEL includes adaptations of papers of ongoing work in transient code development, tritium systems risk assessment, heat transfer activities, and a summary of a workshop on safety in design. A List of Publications and Proposed FY-82 Activities are also presented

NASA's aviation safety research and technology program

Science.gov (United States)

Fichtl, G. H.

1977-01-01

Aviation safety is challenged by the practical necessity of compromising inherent factors of design, environment, and operation. If accidents are to be avoided these factors must be controlled to a degree not often required by other transport modes. The operational problems which challenge safety seem to occur most often in the interfaces within and between the design, the environment, and operations where mismatches occur due to ignorance or lack of sufficient understanding of these interactions. Under this report the following topics are summarized: (1) The nature of operating problems, (2) NASA aviation safety research, (3) clear air turbulence characterization and prediction, (4) CAT detection, (5) Measurement of Atmospheric Turbulence (MAT) Program, (6) Lightning, (7) Thunderstorm gust fronts, (8) Aircraft ground operating problems, (9) Aircraft fire technology, (10) Crashworthiness research, (11) Aircraft wake vortex hazard research, and (12) Aviation safety reporting system.

An evaluation of an airline cabin safety education program for elementary school children.

Science.gov (United States)

Liao, Meng-Yuan

2014-04-01

The knowledge, attitude, and behavior intentions of elementary school students about airline cabin safety before and after they took a specially designed safety education course were examined. A safety education program was designed for school-age children based on the cabin safety briefings airlines given to their passengers, as well as on lessons learned from emergency evacuations. The course is presented in three modes: a lecture, a demonstration, and then a film. A two-step survey was used for this empirical study: an illustrated multiple-choice questionnaire before the program, and, upon completion, the same questionnaire to assess its effectiveness. Before the program, there were significant differences in knowledge and attitude based on school locations and the frequency that students had traveled by air. After the course, students showed significant improvement in safety knowledge, attitude, and their behavior intention toward safety. Demographic factors, such as gender and grade, also affected the effectiveness of safety education. The study also showed that having the instructor directly interact with students by lecturing is far more effective than presenting the information using only video media. A long-term evaluation, the effectiveness of the program, using TV or video accessible on the Internet to deliver a cabin safety program, and a control group to eliminate potential extraneous factors are suggested for future studies. Copyright © 2013 Elsevier Ltd. All rights reserved.

Chronic beryllium disease prevention program; worker safety and health program. Final rule.

Science.gov (United States)

2006-02-09

The Department of Energy (DOE) is today publishing a final rule to implement the statutory mandate of section 3173 of the Bob Stump National Defense Authorization Act (NDAA) for Fiscal Year 2003 to establish worker safety and health regulations to govern contractor activities at DOE sites. This program codifies and enhances the worker protection program in operation when the NDAA was enacted.

Price-Anderson Nuclear Safety Enforcement Program. 1997 annual report

International Nuclear Information System (INIS)

1998-01-01

This report summarizes activities in the Department of Energy's Price-Anderson Amendments Act (PAAA) Enforcement Program in calendar year 1997 and highlights improvements planned for 1998. The DOE Enforcement Program involves the Office of Enforcement and Investigation in the DOE Headquarters Office of Environment, Safety and Health, as well as numerous PAAA Coordinators and technical advisors in DOE Field and Program Offices. The DOE Enforcement Program issued 13 Notices of Violation (NOV's) in 1997 for cases involving significant or potentially significant nuclear safety violations. Six of these included civil penalties totaling $440,000. Highlights of these actions include: (1) Brookhaven National Laboratory Radiological Control Violations / Associated Universities, Inc.; (2) Bioassay Program Violations at Mound / EG ampersand G, Inc.; (3) Savannah River Crane Operator Uptake / Westinghouse Savannah River Company; (4) Waste Calciner Worker Uptake / Lockheed-Martin Idaho Technologies Company; and (5) Reactor Scram and Records Destruction at Sandia / Sandia Corporation (Lockheed-Martin). Sandia / Sandia Corporation (Lockheed-Martin)

Evaluating the effectiveness of a logger safety training program.

Science.gov (United States)

Bell, Jennifer L; Grushecky, Shawn T

2006-01-01

Logger safety training programs are rarely, if ever, evaluated as to their effectiveness in reducing injuries. Workers' compensation claim rates were used to evaluate the effectiveness of a logger safety training program, the West Virginia Loggers' Safety Initiative (LSI). There was no claim rate decline detected in the majority (67%) of companies that participated in all 4 years of the LSI. Furthermore, their rate did not differ from the rest of the WV logging industry that did not participate in the LSI. Worker turnover was significantly related to claim rates; companies with higher turnover of employees had higher claim rates. Companies using feller bunchers to harvest trees at least part of the time had a significantly lower claim rate than companies not using them. Companies that had more inspections per year had lower claim rates. High injury rates persist even in companies that receive safety training; high employee turnover may affect the efficacy of training programs. The logging industry should be encouraged to facilitate the mechanization of logging tasks, to address barriers to employee retention, and to increase the number of in-the-field performance monitoring inspections. Impact on industry There are many states whose logger safety programs include only about 4-8 hours of safe work practices training. These states may look to West Virginia's expanded training program (the LSI) as a model for their own programs. However, the LSI training may not be reaching loggers due to the delay in administering training to new employees and high levels of employee turnover. Regardless of training status, loggers' claim rates decline significantly the longer they work for a company. It may be that high injury rates in the state of West Virginia would be best addressed by finding ways to encourage and facilitate companies to become more mechanized in their harvesting practices, and to increase employee tenure. Increasing the number of yearly performance inspections

Commentary: Epidemiology in the era of big data.

Science.gov (United States)

Mooney, Stephen J; Westreich, Daniel J; El-Sayed, Abdulrahman M

2015-05-01

Big Data has increasingly been promoted as a revolutionary development in the future of science, including epidemiology. However, the definition and implications of Big Data for epidemiology remain unclear. We here provide a working definition of Big Data predicated on the so-called "three V's": variety, volume, and velocity. From this definition, we argue that Big Data has evolutionary and revolutionary implications for identifying and intervening on the determinants of population health. We suggest that as more sources of diverse data become publicly available, the ability to combine and refine these data to yield valid answers to epidemiologic questions will be invaluable. We conclude that while epidemiology as practiced today will continue to be practiced in the Big Data future, a component of our field's future value lies in integrating subject matter knowledge with increased technical savvy. Our training programs and our visions for future public health interventions should reflect this future.

OPG - Waterways public safety program

Energy Technology Data Exchange (ETDEWEB)

Bennett, Tony [Ontario Power Generation (Canada)

2011-07-01

Ontario Power Generation (OPG) operates 65 hydroelectric generating stations in Ontario and has 241 dams. Security around dams is an important matter to minimize exposure of the public to hazards and to prevent an uncontrolled release of water and also to be prepared in case of failure. The purpose of this presentation is to describe the waterways public safety program developed by OPG in association with the Ontario Waterpower Associattion, the Canadian Dam Association and the Ontario Ministry of Natural Resoruces. This program takes a managed system approach with continuous review to address specific and changing conditions of sites. Policies, accountability mechanisms and assessments are first planned, and then implemented, every day functioning is monitored, corrective actions are developed on the basis of issues and reports are compiled for planning of new improvements. This research program provided OPG with new methods for preventing accidents more efficiently.

THE SCHOOL HEALTH AND SAFETY PROGRAM.

Science.gov (United States)

1963

INVOLVING INDIVIDUALS AS WELL AS ORGANIZATIONS, THE PROGRAM AIMED AT THE OPTIMUM HEALTH OF ALL CHILDREN, AND IMPROVEMENT OF HEALTH AND SAFETY STANDARDS WITHIN THE COMMUNITY. EACH OF THE CHILDREN WAS URGED TO HAVE A SUCCESSFUL VACCINATION FOR SMALL POX, THE DPT SERIES AND BOOSTER, THE POLIO SERIES, AND CORRECTIONS OF ALL DENTAL DEFECTS AND…

The USERDA transport R and D program for environment and safety

International Nuclear Information System (INIS)

Sisler, J.A.

1976-01-01

This paper describes the U.S. Energy Research and Development Administration's (ERDA) transportation environment and safety research and development program for energy fuels and wastes, including background, current activities, and future plans. It will serve as an overview and integrating factor for the several related technical papers to be presented at this meeting which will enlarge on the detail of specific projects. The transportation R and D program provides for the environmental and safety review of transport systems and procedures; standards development; and package, vehicle, and systems testing for nuclear materials transport. A primary output of the program is the collection, processing, and dissemination of transport environment and safety data, shipment statistics, and technical information. Special transport projects which do not easily fit elsewhere in ERDA are usually done as a part of this program. (author)

A Proposed Concentration Curriculum Design for Big Data Analytics for Information Systems Students

Science.gov (United States)

Molluzzo, John C.; Lawler, James P.

2015-01-01

Big Data is becoming a critical component of the Information Systems curriculum. Educators are enhancing gradually the concentration curriculum for Big Data in schools of computer science and information systems. This paper proposes a creative curriculum design for Big Data Analytics for a program at a major metropolitan university. The design…

Assessment of elementary school safety restraint programs.

Science.gov (United States)

1985-06-01

The purpose of this research was to identify elementary school (K-6) safety belt : education programs in use in the United States, to review their development, and : to make administrative and impact assessments of their use in selected States. : Six...

77 FR 3784 - Recreational Boating Safety Projects, Programs and Activities Funded Under Provisions of the...

Science.gov (United States)

2012-01-25

... program which provides full marketing, media, public information, and program strategy support to the... Wear, Vessel Safety Check Program (VSC), Boating Safety Education Courses, Propeller Strike Avoidance, Carbon Monoxide Poisoning Awareness and Education, and other recreational boating safety issues on an as...

Application of quality assurance program to safety related aging equipment or components

International Nuclear Information System (INIS)

Papaiya, N.C.

1990-01-01

This paper addresses how quality assurance programs and their criteria are applied to safety related and aging equipment or components used in commercial nuclear plant applications. The QA Programs referred to are 10CFR50 Appendix B and EPRI NP-5652. The QA programs as applicable are applied to equipment/component aging qualification, preventive maintenance, surveillance testing and procurement engineering. The intent of this paper is not the technical issues, methods and research of aging. The paper addresses QA program's application to age-related equipment or components in safety related applications. Quality Assurance Program 10CFR50 Appendix B applies to all safety related aging components or equipment related to the qualification program and associated preventive maintenance and surveillance testing programs. Quality Assurance involvement with procurement engineering for age-related commercial grade items supports EPRI NP-5652 and assures that the dedicated OGI is equal to the item purchased as a basic component to 10CFR50 Appendix B requirements

Clinton P. Anderson Meson Physics Facility and its operational safety program

International Nuclear Information System (INIS)

Putnam, T.M.

1975-01-01

The Clinton P. Anderson Meson Physics Facility (LAMPF) at the Los Alamos Scientific Laboratory consists of/ (1) a medium-energy, high-intensity linear proton accelerator; (2) experimental areas designed to support a multidisciplined program of research and practical applications; and (3) support facilities for accelerator operations and the experimental program. The high-intensity primary and secondary beams at LAMPF and the varied research program create many interesting and challenging problems for the Health Physics staff. A brief overview of LAMPF is presented, and the Operational Safety Program is discussed, with emphasis on the radiological safety and health physics aspects

Revised GCFR safety program plan

International Nuclear Information System (INIS)

Kelley, A.P.; Boyack, B.E.; Torri, A.

1980-05-01

This paper presents a summary of the recently revised gas-cooled fast breeder reactor (GCFR) safety program plan. The activities under this plan are organized to support six lines of protection (LOPs) for protection of the public from postulated GCFR accidents. Each LOP provides an independent, sequential, quantifiable risk barrier between the public and the radiological hazards associated with postulated GCFR accidents. To implement a quantitative risk-based approach in identifying the important technology requirements for each LOP, frequency and consequence-limiting goals are allocated to each. To ensure that all necessary tasks are covered to achieve these goals, the program plan is broken into a work breakdown structure (WBS). Finally, the means by which the plan is being implemented are discussed

Challenges and potential solutions for big data implementations in developing countries.

Science.gov (United States)

Luna, D; Mayan, J C; García, M J; Almerares, A A; Househ, M

2014-08-15

The volume of data, the velocity with which they are generated, and their variety and lack of structure hinder their use. This creates the need to change the way information is captured, stored, processed, and analyzed, leading to the paradigm shift called Big Data. To describe the challenges and possible solutions for developing countries when implementing Big Data projects in the health sector. A non-systematic review of the literature was performed in PubMed and Google Scholar. The following keywords were used: "big data", "developing countries", "data mining", "health information systems", and "computing methodologies". A thematic review of selected articles was performed. There are challenges when implementing any Big Data program including exponential growth of data, special infrastructure needs, need for a trained workforce, need to agree on interoperability standards, privacy and security issues, and the need to include people, processes, and policies to ensure their adoption. Developing countries have particular characteristics that hinder further development of these projects. The advent of Big Data promises great opportunities for the healthcare field. In this article, we attempt to describe the challenges developing countries would face and enumerate the options to be used to achieve successful implementations of Big Data programs.

Big Data Components for Business Process Optimization

Directory of Open Access Journals (Sweden)

Mircea Raducu TRIFU

2016-01-01

Full Text Available In these days, more and more people talk about Big Data, Hadoop, noSQL and so on, but very few technical people have the necessary expertise and knowledge to work with those concepts and technologies. The present issue explains one of the concept that stand behind two of those keywords, and this is the map reduce concept. MapReduce model is the one that makes the Big Data and Hadoop so powerful, fast, and diverse for business process optimization. MapReduce is a programming model with an implementation built to process and generate large data sets. In addition, it is presented the benefits of integrating Hadoop in the context of Business Intelligence and Data Warehousing applications. The concepts and technologies behind big data let organizations to reach a variety of objectives. Like other new information technologies, the main important objective of big data technology is to bring dramatic cost reduction.

Thermonuclear generation program: risks and safety

International Nuclear Information System (INIS)

Goes, Alexandre Gromann de Araujo

1999-01-01

This work deals with the fundamental concepts of risk and safety related to nuclear power generation. In the first chapter, a general evaluation of the various systems for energy generation and their environmental impacts is made. Some definitions for safety and risk are suggested, based on the already existing regulatory processes and also on the current tendencies of risk management. Aspects regarding the safety culture are commented. The International Nuclear Event Scale (INES), a coherent and clear mechanism of communication between nuclear specialists and the general public, is analyzed. The second chapter examines the thermonuclear generation program in Brazil and the role of the National Nuclear Energy Commission. The third chapter presents national and international scenarios in terms of safety and risks, available policies and the main obstacles for future development of nuclear energy and nuclear engineering, and strategies are proposed. In the last chapter, comments about possible trends and recommendations related to practical risk management procedures, taking into account rational criteria for resources distribution and risk reduction are made, envisaging a closer integration between nuclear specialists and the society as a whole, thus decreasing the conflicts in a democratic decision-making process

Alberta Environment's weir safety program : options for rehabilitation to improve public safety : a case study of the Calgary weir

Energy Technology Data Exchange (ETDEWEB)

Blakely, D [Alberta Environment, Edmonton, AB (Canada)

2009-07-01

Alberta Environment Water Management Operations (WMO) owns and operates 46 dams and 800 kilometres of canals in Alberta. The WMO consists of 120 staff and several contract operators to take care of this infrastructure. Most of the infrastructure supplies water for irrigation use, which adds 5 billion dollars to the provincial economy annually. Other water uses include stock watering, domestic use, municipal use, recreational use and habitat. Alberta Environment's weir safety program was also discussed along with options for rehabilitation to improve public safety. A case study of Calgary's Weir Dam on the Bow River was highlighted. A brief history of the dam was offered and safety programs around provincially-owned weirs were discussed. Photographs were included to illustrate some of the additional safety measures at the Calgary weir, such as suspended safety buoys upstream of the boom directing paddlers to the portage trail, and signage on the river that can be activated when the boom is out. Typical river users on the Calgary Bow River and safety history at the Calgary Weir were discussed along with other topics such as the Calgary Bow River weir project criteria; project design progress; pre-feasibility options; scale modelling; final design analysis; construction funding; and proposed changes to the safety program for the new weir configuration. figs.

Prioritization of R and D programs on probabilistic reactor safety

International Nuclear Information System (INIS)

Husseiny, A.A.

1982-01-01

An interactive computer code based on the multiattribute utility theory has been developed with graphic capabilities to use in selection of probabilistic reactor safety RandD programs. Utility values and proper graphic representation are made through lottery games on the computer terminal. The code is applied to prioritize a set of RandD programs on LWR safety based on attributes including regulatory issues, institutional issues and operation problems. The methodology is described here in detail with its applications. Some of the input includes statistical distributions and subjective judgments on institutional issues. The flexibility of the approach provides a tool for decision makers whether on individual or group level to assess LWR safety priorities and continuously update their strategies

Home safe home: Evaluation of a childhood home safety program.

Science.gov (United States)

Stewart, Tanya Charyk; Clark, Andrew; Gilliland, Jason; Miller, Michael R; Edwards, Jane; Haidar, Tania; Batey, Brandon; Vogt, Kelly N; Parry, Neil G; Fraser, Douglas D; Merritt, Neil

2016-09-01

The London Health Sciences Centre Home Safety Program (HSP) provides safety devices, education, a safety video, and home safety checklist to all first-time parents for the reduction of childhood home injuries. The objective of this study was to evaluate the HSP for the prevention of home injuries in children up to 2 years of age. A program evaluation was performed with follow-up survey, along with an interrupted time series analysis of emergency department (ED) visits for home injuries 5 years before (2007-2013) and 2 years after (2013-2015) implementation. Spatial analysis of ED visits was undertaken to assess differences in home injury rates by dissemination areas controlling differences in socioeconomic status (i.e., income, education, and lone-parent status) at the neighborhood level. A total of 3,458 first-time parents participated in the HSP (a 74% compliance rate). Of these, 20% (n = 696) of parents responded to our questionnaire, with 94% reporting the program to be useful (median, 6; interquartile range, 2 on a 7-point Likert scale) and 81% learning new strategies for preventing home injuries. The median age of the respondent's babies were 12 months (interquartile range, 1). The home safety check list was used by 87% of respondents to identify hazards in their home, with 95% taking action to minimize the risk. The time series analysis demonstrated a significant decline in ED visits for home injuries in toddlers younger than2 years of age after HSP implementation. The declines in ED visits for home injuries remained significant over and above each socioeconomic status covariate. Removing hazards, supervision, and installing safety devices are key facilitators in the reduction of home injuries. Parents found the HSP useful to identify hazards, learn new strategies, build confidence, and provide safety products. Initial finding suggests that the program is effective in reducing home injuries in children up to 2 years of age. Therapeutic/care management study

National machine guarding program: Part 2. Safety management in small metal fabrication enterprises

Science.gov (United States)

Yamin, Samuel C.; Brosseau, Lisa M.; Xi, Min; Gordon, Robert; Most, Ivan G.; Stanley, Rodney

2015-01-01

Background Small manufacturing businesses often lack important safety programs. Many reasons have been set forth on why this has remained a persistent problem. Methods The National Machine Guarding Program (NMGP) was a nationwide intervention conducted in partnership with two workers' compensation insurers. Insurance safety consultants collected baseline data in 221 business using a 33‐question safety management audit. Audits were completed during an interview with the business owner or manager. Results Most measures of safety management improved with an increasing number of employees. This trend was particularly strong for lockout/tagout. However, size was only significant for businesses without a safety committee. Establishments with a safety committee scored higher (55% vs. 36%) on the safety management audit compared with those lacking a committee (P management programs were frequently absent. A safety committee appears to be a more important factor than business size in accounting for differences in outcome measures. Am. J. Ind. Med. 58:1184–1193, 2015. © 2015 The Authors. American Journal of Industrial Medicine Published by Wiley Periodicals, Inc. PMID:26345591

Software analysis by simulation for nuclear plant availability and safety goals

International Nuclear Information System (INIS)

Lapassat, A.M.; Segalard, J.; Salichon, M.; Le Meur, M.; Boulc'h, J.

1988-01-01

The microprocessors utilisation for monitoring protection and safety of nuclear reactor has become reality in the eighties. The authorities responsible for reactor safety systems have considered the necessity of the correct functioning of reactor control systems. The problems take off, when analysis of software, has led us in a first time to develop a completely software tool of verification and validation of programs and specifications. The CEA (French Atomic Energie Commission) responsible of reliable distributed techniques of nuclear plant discusses in this paper the software test and simulation tools used to analyse real-time software. The tool O.S.T. make part of a big program of help for the conception and the evaluation for the systems' fault tolerance which the European ESPRIT SMART no. 1609 (System Measurement and Architecture Technique) will be the kernel [fr

General aviation crash safety program at Langley Research Center

Science.gov (United States)

Thomson, R. G.

1976-01-01

The purpose of the crash safety program is to support development of the technology to define and demonstrate new structural concepts for improved crash safety and occupant survivability in general aviation aircraft. The program involves three basic areas of research: full-scale crash simulation testing, nonlinear structural analyses necessary to predict failure modes and collapse mechanisms of the vehicle, and evaluation of energy absorption concepts for specific component design. Both analytical and experimental methods are being used to develop expertise in these areas. Analyses include both simplified procedures for estimating energy absorption capabilities and more complex computer programs for analysis of general airframe response. Full-scale tests of typical structures as well as tests on structural components are being used to verify the analyses and to demonstrate improved design concepts.

From Big Data to Smart Data for Pharmacovigilance: The Role of Healthcare Databases and Other Emerging Sources.

Science.gov (United States)

Trifirò, Gianluca; Sultana, Janet; Bate, Andrew

2018-02-01

In the last decade 'big data' has become a buzzword used in several industrial sectors, including but not limited to telephony, finance and healthcare. Despite its popularity, it is not always clear what big data refers to exactly. Big data has become a very popular topic in healthcare, where the term primarily refers to the vast and growing volumes of computerized medical information available in the form of electronic health records, administrative or health claims data, disease and drug monitoring registries and so on. This kind of data is generally collected routinely during administrative processes and clinical practice by different healthcare professionals: from doctors recording their patients' medical history, drug prescriptions or medical claims to pharmacists registering dispensed prescriptions. For a long time, this data accumulated without its value being fully recognized and leveraged. Today big data has an important place in healthcare, including in pharmacovigilance. The expanding role of big data in pharmacovigilance includes signal detection, substantiation and validation of drug or vaccine safety signals, and increasingly new sources of information such as social media are also being considered. The aim of the present paper is to discuss the uses of big data for drug safety post-marketing assessment.

Scaling Big Data Cleansing

KAUST Repository

Khayyat, Zuhair

2017-07-31

Data cleansing approaches have usually focused on detecting and fixing errors with little attention to big data scaling. This presents a serious impediment since identify- ing and repairing dirty data often involves processing huge input datasets, handling sophisticated error discovery approaches and managing huge arbitrary errors. With large datasets, error detection becomes overly expensive and complicated especially when considering user-defined functions. Furthermore, a distinctive algorithm is de- sired to optimize inequality joins in sophisticated error discovery rather than na ̈ıvely parallelizing them. Also, when repairing large errors, their skewed distribution may obstruct effective error repairs. In this dissertation, I present solutions to overcome the above three problems in scaling data cleansing. First, I present BigDansing as a general system to tackle efficiency, scalability, and ease-of-use issues in data cleansing for Big Data. It automatically parallelizes the user’s code on top of general-purpose distributed platforms. Its programming inter- face allows users to express data quality rules independently from the requirements of parallel and distributed environments. Without sacrificing their quality, BigDans- ing also enables parallel execution of serial repair algorithms by exploiting the graph representation of discovered errors. The experimental results show that BigDansing outperforms existing baselines up to more than two orders of magnitude. Although BigDansing scales cleansing jobs, it still lacks the ability to handle sophisticated error discovery requiring inequality joins. Therefore, I developed IEJoin as an algorithm for fast inequality joins. It is based on sorted arrays and space efficient bit-arrays to reduce the problem’s search space. By comparing IEJoin against well- known optimizations, I show that it is more scalable, and several orders of magnitude faster. BigDansing depends on vertex-centric graph systems, i.e., Pregel

Steering with big words: articulating ideographs in research programs

NARCIS (Netherlands)

Bos, Colette; Walhout, Bart; Walhout, Bart; Peine, Alexander; van Lente, Harro

2014-01-01

Nowadays, science should address societal challenges, such as ‘sustainability’, or ‘responsible research and innovation’. This emerging form of steering toward broad and generic goals involves the use of ‘big words’: encompassing concepts that are uncontested themselves, but that allow for multiple

Fusion Safety Program annual report, fiscal year 1984

International Nuclear Information System (INIS)

Crocker, J.G.; Holland, D.F.

1985-06-01

This report summarizes the Fusion Safety Program major activities in fiscal year 1984. The Idaho National Engineering Laboratory (INEL) is the designated lead laboratory and EG and G Idaho, Inc., is the prime contractor for this program, which was initiated in 1979. A report section titled ''Activities at the INEL'' includes progress reports on the tritium implantation experiment, tritium blanket permeation, volatilization of reactor alloys, plasma disruptions, a comparative blanket safety assessment, transient code development, and a discussion of the INEL's participation in the Tokamak Fusion Core Experiment (TFCX) design study. The report section titled ''Outside Contracts'' includes progress reports on tritium conversion by the Oak Ridge National Laboratory (ORNL), lithium-lead reactions by the Hanford Engineering Development Laboratory (HEDL) and the University of Wisconsin, magnet safety by the Francis Bitter Magnet Laboratory of the Massachusetts Institute of Technology (MIT) and Argonne National Laboratory (ANL), risk assessment by MIT, tritium retention by the University of Virginia, and activation product release by GA Technologies. A list of publications produced during the year and brief descriptions of activities planned for FY-1985 are also included

Risks due to fires at Big Rock Point

International Nuclear Information System (INIS)

Brinsfield, W.A.; Blanchard, D.P.

1983-01-01

The unique and older designs of the Big Rock Point nuclear plant is such that fires contribute significantly to the probability of core damage predicted in the probabilistic risk assessment performed for this plant. The methodology employed to determine this contribution reflects the unique, as constructed, plant design, while systematically and logically addressing the true effect of fires on the operation of the plant and the safety of the public. As a result of the methodology utilized in the PRA, recommendations are made which minimize the risk of core damage due to fires. Included in these recommendations is a proposal for equipment and controls to be included on the Big Rock Point alternate shutdown panel

Construction safety program for the National Ignition Facility, Appendix B

Energy Technology Data Exchange (ETDEWEB)

Cerruti, S.J.

1997-06-26

This Appendix contains material from the LLNL Health and Safety Manual as listed below. For sections not included in this list, please refer to the Manual itself. The areas covered are: asbestos, lead, fire prevention, lockout, and tag program confined space traffic safety.

Construction safety program for the National Ignition Facility, Appendix B

International Nuclear Information System (INIS)

Cerruti, S.J.

1997-01-01

This Appendix contains material from the LLNL Health and Safety Manual as listed below. For sections not included in this list, please refer to the Manual itself. The areas covered are: asbestos, lead, fire prevention, lockout, and tag program confined space traffic safety

BigOP: Generating Comprehensive Big Data Workloads as a Benchmarking Framework

OpenAIRE

Zhu, Yuqing; Zhan, Jianfeng; Weng, Chuliang; Nambiar, Raghunath; Zhang, Jinchao; Chen, Xingzhen; Wang, Lei

2014-01-01

Big Data is considered proprietary asset of companies, organizations, and even nations. Turning big data into real treasure requires the support of big data systems. A variety of commercial and open source products have been unleashed for big data storage and processing. While big data users are facing the choice of which system best suits their needs, big data system developers are facing the question of how to evaluate their systems with regard to general big data processing needs. System b...

Tank waste remediation system nuclear criticality safety program management review

International Nuclear Information System (INIS)

BRADY RAAP, M.C.

1999-01-01

This document provides the results of an internal management review of the Tank Waste Remediation System (TWRS) criticality safety program, performed in advance of the DOE/RL assessment for closure of the TWRS Nuclear Criticality Safety Issue, March 1994. Resolution of the safety issue was identified as Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement) Milestone M-40-12, due September 1999

How Big Is Too Big?

Science.gov (United States)

Cibes, Margaret; Greenwood, James

2016-01-01

Media Clips appears in every issue of Mathematics Teacher, offering readers contemporary, authentic applications of quantitative reasoning based on print or electronic media. This issue features "How Big is Too Big?" (Margaret Cibes and James Greenwood) in which students are asked to analyze the data and tables provided and answer a…

Integrating R and Hadoop for Big Data Analysis

Directory of Open Access Journals (Sweden)

Bogdan Oancea

2014-06-01

Full Text Available Analyzing and working with big data could be very difficult using classical means like relational database management systems or desktop software packages for statistics and visualization. Instead, big data requires large clusters with hundreds or even thousands of computing nodes. Official statistics is increasingly considering big data for deriving new statistics because big data sources could produce more relevant and timely statistics than traditional sources. One of the software tools successfully and wide spread used for storage and processing of big data sets on clusters of commodity hardware is Hadoop. Hadoop framework contains libraries, a distributed file-system (HDFS, a resource-management platform and implements a version of the MapReduce programming model for large scale data processing. In this paper we investigate the possibilities of integrating Hadoop with R which is a popular software used for statistical computing and data visualization. We present three ways of integrating them: R with Streaming, Rhipe and RHadoop and we emphasize the advantages and disadvantages of each solution.

Nuclear reactor safety program in US department of energy and future perspectives

International Nuclear Information System (INIS)

Song, Y.T.

1988-01-01

The US Department of Energy (DOE) establishes policy, issues orders, and assures compliance with requirements. The contractors who design, construct, modify, operate, maintain and decommission DOE reactors, set forth the assessment of the safety of cognizant reactors and implement DOE orders. Teams of experts in the Department, through scheduled and unscheduled review programs, reassess the safety of reactors in every phases of their lives. As new technology develops, the safety programs are reevaluated and policies are modified to accommodate these new technologies. The diagnostic capabilities of the computer using multiple alarms to enhance detection of defects and control of a reactor have been greatly utilized in reactor operating systems. The Application of artificial intelligence technologies for diagnostic and even for the decision making process in the event of reactor accidents would be one of the future trends in reactor safety programs

Prioritization of tasks in the draft LWR safety technology program plan. Final report

International Nuclear Information System (INIS)

Lim, E.Y.; Miller, W.J.; Parkinson, W.J.; Ritzman, R.L.; vonHerrmann, J.L.; Wood, P.J.

1980-05-01

The purpose of this report is to describe both the approach taken and the results produced in the SAI effort to prioritize the tasks in the Sandia draft LWR Safety Technology Program Plan. This work used the description of important safety issues developed in the Reactor Safety Study (2) to quantify the effect of safety improvements resulting from a research and development program on the risk from nuclear power plants. Costs of implementation of these safety improvements were also estimated to allow a presentation of the final results in a value (i.e., risk reduction) vs. impact (i.e., implementation costs) matrix

A genetic algorithm-based job scheduling model for big data analytics.

Science.gov (United States)

Lu, Qinghua; Li, Shanshan; Zhang, Weishan; Zhang, Lei

Big data analytics (BDA) applications are a new category of software applications that process large amounts of data using scalable parallel processing infrastructure to obtain hidden value. Hadoop is the most mature open-source big data analytics framework, which implements the MapReduce programming model to process big data with MapReduce jobs. Big data analytics jobs are often continuous and not mutually separated. The existing work mainly focuses on executing jobs in sequence, which are often inefficient and consume high energy. In this paper, we propose a genetic algorithm-based job scheduling model for big data analytics applications to improve the efficiency of big data analytics. To implement the job scheduling model, we leverage an estimation module to predict the performance of clusters when executing analytics jobs. We have evaluated the proposed job scheduling model in terms of feasibility and accuracy.

Fusion Safety Program annual report, fiscal year 1985

International Nuclear Information System (INIS)

Holland, D.F.; Merrill, B.J.; Herring, J.S.; Piet, S.J.; Longhurst, G.R.

1987-02-01

The Fusion Safety Program (FSP) has supported magnetic fusion technology for seven years, and this is the seventh annual report issued by the FSP. Program focus is identification of the magnitude and distribution of radioactive inventories in fusion reactors, and research and analysis of postulated accident scenarios that could cause the release of a portion of these inventories. Research results are used to develop improved designs that can reduce the probability and magnitude of such releases and thus improve the overall safety of fusion reactors. During FY-1985, research activities continued and participation continued on the Ignition Systems Project (ISP). This report presents the significant results of EGandG Idaho, Inc., activities and those from outside contracts, and includes a list of publications produced during the year, and activities planned for FY-1986

Getting started with Greenplum for big data analytics

CERN Document Server

Gollapudi, Sunila

2013-01-01

Standard tutorial-based approach.""Getting Started with Greenplum for Big Data"" Analytics is great for data scientists and data analysts with a basic knowledge of Data Warehousing and Business Intelligence platforms who are new to Big Data and who are looking to get a good grounding in how to use the Greenplum Platform. It's assumed that you will have some experience with database design and programming as well as be familiar with analytics tools like R and Weka.

ASSESSMENT OF FOOD SAFETY PRACTICES AMONG CASSAVA ...

African Journals Online (AJOL)

Philips Olusola

public policies on food safety management. ... in the contemporary world and a significant factor in the reduction of productivity. There is some .... adduced to the views of the majority who considered food safety practices a big ..... Contingency.

Fusion Safety Program annual report: Fiscal year 1986

International Nuclear Information System (INIS)

Holland, D.F.; Merrill, B.J.; Herring, J.S.; Piet, S.J.; Longhurst, G.R.

1987-06-01

This report summarizes the Fusion Safety Program's (FSP) major activities in fiscal year 1986. The Idaho National Engineering Laboratory (INEL) is the designated lead laboratory, and EG and G Idaho, Inc., is the prime contractor for FSP, which was initiated in 1979. Activities are conducted at the INEL and in participating facilities, including the Hanford Engineering Development Laboratory (HEDL), the Massachusetts Institute of Technology (MIT), and the University of Wisconsin. The technical areas covered in this report include tritium safety, activation product release, reactions involving lithium breeding materials, safety of fusion magnet systems, plasma disruption, risk assessment methodology, and computer code development for reactor transients. Contributions to the Technical Planning Activity (TPA) and the ''white paper'' study by the Environmental, Safety,and Economics Committee (ESECOM) are summarized. The report also includes a summary of the safety and environmental analysis and documentation performed by the INEL for the Compact Ignition Tokamak (CIT) design project

Really big numbers

CERN Document Server

Schwartz, Richard Evan

2014-01-01

In the American Mathematical Society's first-ever book for kids (and kids at heart), mathematician and author Richard Evan Schwartz leads math lovers of all ages on an innovative and strikingly illustrated journey through the infinite number system. By means of engaging, imaginative visuals and endearing narration, Schwartz manages the monumental task of presenting the complex concept of Big Numbers in fresh and relatable ways. The book begins with small, easily observable numbers before building up to truly gigantic ones, like a nonillion, a tredecillion, a googol, and even ones too huge for names! Any person, regardless of age, can benefit from reading this book. Readers will find themselves returning to its pages for a very long time, perpetually learning from and growing with the narrative as their knowledge deepens. Really Big Numbers is a wonderful enrichment for any math education program and is enthusiastically recommended to every teacher, parent and grandparent, student, child, or other individual i...

Training and qualification program for nuclear criticality safety technical staff. Revision 1

International Nuclear Information System (INIS)

Taylor, R.G.; Worley, C.A.

1997-01-01

A training and qualification program for nuclear criticality safety technical staff personnel has been developed and implemented. All personnel who are to perform nuclear criticality safety technical work are required to participate in the program. The program includes both general nuclear criticality safety and plant specific knowledge components. Advantage can be taken of previous experience for that knowledge which is portable such as performance of computer calculations. Candidates step through a structured process which exposes them to basic background information, general plant information, and plant specific information which they need to safely and competently perform their jobs. Extensive documentation is generated to demonstrate that candidates have met the standards established for qualification

Safety analysis report upgrade program at the Plutonium Facility, Los Alamos National Laboratory

International Nuclear Information System (INIS)

Pan, P.Y.

1993-01-01

Plutonium research and development activities have resided at the Los Alamos National Laboratory (LANL) since 1943. The function of the Plutonium Facility (PF-4) has been to perform basic special nuclear materials research and development and to support national defense and energy programs. The original Final Safety Analysis Report (FSAR) for PF-4 was approved by DOE in 1978. This FSAR analyzed design-basis and bounding accidents. In 1986, DOE/AL published DOE/AL Order 5481.1B, ''Safety Analysis and Review System'', as a requirement for preparation and review of safety analyses. To meet the new DOE requirements, the Facilities Management Group of the Nuclear Material Technology Division submitted a draft FSAR to DOE for approval in April 1991. This draft FSAR analyzed the new configurations and used a limited-scope probabilistic risk analysis for accident analysis. During the DOE review of the draft FSAR, DOE Order 5480.23 ''Nuclear Safety Analysis Reports'', was promulgated and was later officially released in April 1992. The new order significantly expands the scope, preparation, and maintenance efforts beyond those required in DOE/AL Order 5481.1B by requiring: description of institutional and human-factor safety programs; clear definitions of all facility-specific safety commitments; more comprehensive and detailed hazard assessment; use of new safety analysis methods; and annual updates of FSARs. This paper describes the safety analysis report (SAR) upgrade program at the Plutonium Facility in LANL. The SAR upgrade program is established to meet the requirements in DOE Order 5480.23. Described in this paper are the SAR background, authorization basis for operations, hazard classification, and technical program elements

ERC Safety and Hygiene Programs functional organization structure and mission statement

International Nuclear Information System (INIS)

Coleman, S.R.

2000-01-01

This document provides a description of the functions, structure, commitments, and goals of the Environmental Restoration Contractor Safety and Hygiene Program. The current structure of the ERC Safety and Hygiene organization is described herein

European passive plant program preliminary safety analyses to support system design

International Nuclear Information System (INIS)

Saiu, Gianfranco; Barucca, Luciana; King, K.J.

1999-01-01

In 1994, a group of European Utilities, together with Westinghouse and its Industrial Partner GENESI (an Italian consortium including ANSALDO and FIAT), initiated a program designated EPP (European Passive Plant) to evaluate Westinghouse Passive Nuclear Plant Technology for application in Europe. In the Phase 1 of the European Passive Plant Program which was completed in 1996, a 1000 MWe passive plant reference design (EP1000) was established which conforms to the European Utility Requirements (EUR) and is expected to meet the European Safety Authorities requirements. Phase 2 of the program was initiated in 1997 with the objective of developing the Nuclear Island design details and performing supporting analyses to start development of Safety Case Report (SCR) for submittal to European Licensing Authorities. The first part of Phase 2, 'Design Definition' phase (Phase 2A) was completed at the end of 1998, the main efforts being design definition of key systems and structures, development of the Nuclear Island layout, and performing preliminary safety analyses to support design efforts. Incorporation of the EUR has been a key design requirement for the EP1000 form the beginning of the program. Detailed design solutions to meet the EUR have been defined and the safety approach has also been developed based on the EUR guidelines. The present paper describes the EP1000 approach to safety analysis and, in particular, to the Design Extension Conditions that, according to the EUR, represent the preferred method for giving consideration to the Complex Sequences and Severe Accidents at the design stage without including them in the design bases conditions. Preliminary results of some DEC analyses and an overview of the probabilistic safety assessment (PSA) are also presented. (author)

Food Safety Program in Asian Countries.

Science.gov (United States)

Yamaguchi, Ryuji; Hwang, Lucy Sun

2015-01-01

By using the ILSI network in Asia, we are holding a session focused on food safety programs in several Asian areas. In view of the external environment, it is expected to impact the global food system in the near future, including the rapid increase in food demand and in public health services due to population growth, as well as the threats to biosecurity and food safety due to the rapid globalization of the food trade. Facilitating effective information sharing holds promise for the activation of the food industry. At this session, Prof. Hwang shares the current situation of Food Safety and Sanitation Regulations in Taiwan. Dr. Liu provides a talk on the role of risk assessment in food regulatory control focused on aluminum-containing food additives in China. After the JECFA evaluation of aluminum-containing food additives in 2011, each country has carried out risk assessment based on dietary intake surveys. Ms. Chan reports on the activities of a working group on Food Standards Harmonization in ASEAN. She also explains that the ILSI Southeast Asia Region has actively supported the various ASEAN Working Groups in utilizing science to harmonize food standards. Prof. Park provides current research activities in Korea focused on the effect of climate change on food safety. Climate change is generally seen as having a negative impact on food security, particularly in developing countries. We use these four presentations as a springboard to vigorous discussion on issues related to Food Safety in Asia.

Nursing Needs Big Data and Big Data Needs Nursing.

Science.gov (United States)

Brennan, Patricia Flatley; Bakken, Suzanne

2015-09-01

Contemporary big data initiatives in health care will benefit from greater integration with nursing science and nursing practice; in turn, nursing science and nursing practice has much to gain from the data science initiatives. Big data arises secondary to scholarly inquiry (e.g., -omics) and everyday observations like cardiac flow sensors or Twitter feeds. Data science methods that are emerging ensure that these data be leveraged to improve patient care. Big data encompasses data that exceed human comprehension, that exist at a volume unmanageable by standard computer systems, that arrive at a velocity not under the control of the investigator and possess a level of imprecision not found in traditional inquiry. Data science methods are emerging to manage and gain insights from big data. The primary methods included investigation of emerging federal big data initiatives, and exploration of exemplars from nursing informatics research to benchmark where nursing is already poised to participate in the big data revolution. We provide observations and reflections on experiences in the emerging big data initiatives. Existing approaches to large data set analysis provide a necessary but not sufficient foundation for nursing to participate in the big data revolution. Nursing's Social Policy Statement guides a principled, ethical perspective on big data and data science. There are implications for basic and advanced practice clinical nurses in practice, for the nurse scientist who collaborates with data scientists, and for the nurse data scientist. Big data and data science has the potential to provide greater richness in understanding patient phenomena and in tailoring interventional strategies that are personalized to the patient. © 2015 Sigma Theta Tau International.

14 CFR 91.25 - Aviation Safety Reporting Program: Prohibition against use of reports for enforcement purposes.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Aviation Safety Reporting Program... GENERAL OPERATING AND FLIGHT RULES General § 91.25 Aviation Safety Reporting Program: Prohibition against... to the National Aeronautics and Space Administration under the Aviation Safety Reporting Program (or...

Overview of a radiation safety program in a district style medical environment

International Nuclear Information System (INIS)

Wilson, G.

2006-01-01

This paper provides an overview of the eight components of a radiation safety program in a large health care facility spread out over several campuses in a large geographic area in Nova Scotia. The main focus is based on those areas that are regulated by the Canadian Nuclear Safety Commission and generally encompass nuclear medicine and radiation therapy operations. X-ray operations are regulated provincially, but the general operational principles of an effective radiation safety program can be applied in all these areas. The main components covered include the set up of an organizational structure that operates separately from individual departments, general items expected from reports to corporate management or regulators, and some examples of the front-line expectations for those in individual departments. The review is not all encompassing, but should give organizations some insight of the magnitude of a radiation safety program in a district style environment. (author)

National machine guarding program: Part 2. Safety management in small metal fabrication enterprises

OpenAIRE

Parker, David L.; Yamin, Samuel C.; Brosseau, Lisa M.; Xi, Min; Gordon, Robert; Most, Ivan G.; Stanley, Rodney

2015-01-01

Background Small manufacturing businesses often lack important safety programs. Many reasons have been set forth on why this has remained a persistent problem. Methods The National Machine Guarding Program (NMGP) was a nationwide intervention conducted in partnership with two workers' compensation insurers. Insurance safety consultants collected baseline data in 221 business using a 33?question safety management audit. Audits were completed during an interview with the business owner or manag...

BIG Data - BIG Gains? Understanding the Link Between Big Data Analytics and Innovation

OpenAIRE

Niebel, Thomas; Rasel, Fabienne; Viete, Steffen

2017-01-01

This paper analyzes the relationship between firms’ use of big data analytics and their innovative performance for product innovations. Since big data technologies provide new data information practices, they create new decision-making possibilities, which firms can use to realize innovations. Applying German firm-level data we find suggestive evidence that big data analytics matters for the likelihood of becoming a product innovator as well as the market success of the firms’ product innovat...

The Role Of Quality Assurance Program For Safety Operation Of Nuclear Installations

International Nuclear Information System (INIS)

Harjanto, N.T.; Purwadi, K.P.; Boru, D.S.; Farida; Suharni

2000-01-01

Nuclear installations expose potential hazard of radiation, therefore in their construction, operation and maintenance, it is necessary to consider safety aspect, in which the safety requirements which has been determined must be met. One of the requirements that is absolutely needed is quality assurance, which covers arrangement of quality assurance program, organization and administration of the implementation of quality assurance, and supervision. Quality Assurance program is a guideline containing quality policies and basic determination on the realization of activities that effect the quality of equipment's and items used in the operation of nuclear installations in order that the operation of nuclear installation can run safety and in accordance with their design aims and operation limits. Quality Assurance Program includes document control, design control, supply control, control of equipment s and items, operation/process control, inspection and control of equipment test, and control of nonconformance and corrections. General system of nuclear installation operation is equipped with safety and supporting systems. These systems must apply the quality assurance program that cover control of activities in the systems. In the implementation of the quality assurance program, it is necessary to establish procedures, work guidelines/instructions, and quality recording that constitutes documents of quality system 2 nd , 3 th , and 4 th level after the quality assurance program. To ensure the effectivity and to prove whether the realization of the program has been pursuant to the determined requirements, an internal audit must be conducted accordingly

Networking for big data

CERN Document Server

Yu, Shui; Misic, Jelena; Shen, Xuemin (Sherman)

2015-01-01

Networking for Big Data supplies an unprecedented look at cutting-edge research on the networking and communication aspects of Big Data. Starting with a comprehensive introduction to Big Data and its networking issues, it offers deep technical coverage of both theory and applications.The book is divided into four sections: introduction to Big Data, networking theory and design for Big Data, networking security for Big Data, and platforms and systems for Big Data applications. Focusing on key networking issues in Big Data, the book explains network design and implementation for Big Data. It exa

Global fluctuation spectra in big-crunch-big-bang string vacua

International Nuclear Information System (INIS)

Craps, Ben; Ovrut, Burt A.

2004-01-01

We study big-crunch-big-bang cosmologies that correspond to exact world-sheet superconformal field theories of type II strings. The string theory spacetime contains a big crunch and a big bang cosmology, as well as additional 'whisker' asymptotic and intermediate regions. Within the context of free string theory, we compute, unambiguously, the scalar fluctuation spectrum in all regions of spacetime. Generically, the big crunch fluctuation spectrum is altered while passing through the bounce singularity. The change in the spectrum is characterized by a function Δ, which is momentum and time dependent. We compute Δ explicitly and demonstrate that it arises from the whisker regions. The whiskers are also shown to lead to 'entanglement' entropy in the big bang region. Finally, in the Milne orbifold limit of our superconformal vacua, we show that Δ→1 and, hence, the fluctuation spectrum is unaltered by the big-crunch-big-bang singularity. We comment on, but do not attempt to resolve, subtleties related to gravitational back reaction and light winding modes when interactions are taken into account

Research program on nuclear technology and nuclear safety

International Nuclear Information System (INIS)

Dreier, J.

2010-04-01

This paper elaborated for the Swiss Federal Office of Energy (SFOE) presents the synthesis report for 2009 made by the SFOE's program leader on the research program concerning nuclear technology and nuclear safety. Work carried out, knowledge gained and results obtained in the various areas are reported on. These include projects carried out in the Laboratory for Reactor Physics and System Behaviour LRS, the LTH Thermohydraulics Laboratory, the Laboratory for Nuclear Materials LNM, the Laboratory for Final Storage Safety LES and the Laboratory for Energy Systems Analysis LEA of the Paul Scherrer Institute PSI. Work done in 2009 and results obtained are reported on, including research on transients in Swiss reactors, risk and human reliability. Work on the 'Proteus' research reactor is reported on, as is work done on component safety. International co-operation in the area of serious accidents and the disposal of nuclear wastes is reported on. Future concepts for reactors and plant life management are discussed. The energy business in general is also discussed. Finally, national and international co-operation is noted and work to be done in 2010 is reviewed

Observed Food Safety Practices in the Summer Food Service Program

Science.gov (United States)

Patten, Emily Vaterlaus; Alcorn, Michelle; Watkins, Tracee; Cole, Kerri; Paez, Paola

2017-01-01

Purpose/Objectives: The purpose of this exploratory, observational study was three-fold: 1) Determine current food safety practices at Summer Food Service Program (SFSP) sites; 2) Identify types of food served at the sites and collect associated temperatures; and 3) Establish recommendations for food safety training in the SFSP.…

Joint FAM/Line Management Assessment Report on LLNL Machine Guarding Safety Program

Energy Technology Data Exchange (ETDEWEB)

Armstrong, J. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-07-19

The LLNL Safety Program for Machine Guarding is implemented to comply with requirements in the ES&H Manual Document 11.2, "Hazards-General and Miscellaneous," Section 13 Machine Guarding (Rev 18, issued Dec. 15, 2015). The primary goal of this LLNL Safety Program is to ensure that LLNL operations involving machine guarding are managed so that workers, equipment and government property are adequately protected. This means that all such operations are planned and approved using the Integrated Safety Management System to provide the most cost effective and safest means available to support the LLNL mission.

75 FR 44051 - Resolicitation of Applications for the Railroad Safety Technology Program Grant Program (RS-TEC...

Science.gov (United States)

2010-07-27

... have a public benefit of improved railroad safety and efficiency. The program makes available $50... projects * * * that have a public benefit of improved safety and network efficiency.'' To be eligible for... percent grantee, cost share (cash or in-kind) requirement. Applications that do not clearly indicate at...

Big Argumentation?

Directory of Open Access Journals (Sweden)

Daniel Faltesek

2013-08-01

Full Text Available Big Data is nothing new. Public concern regarding the mass diffusion of data has appeared repeatedly with computing innovations, in the formation before Big Data it was most recently referred to as the information explosion. In this essay, I argue that the appeal of Big Data is not a function of computational power, but of a synergistic relationship between aesthetic order and a politics evacuated of a meaningful public deliberation. Understanding, and challenging, Big Data requires an attention to the aesthetics of data visualization and the ways in which those aesthetics would seem to depoliticize information. The conclusion proposes an alternative argumentative aesthetic as the appropriate response to the depoliticization posed by the popular imaginary of Big Data.

Job schedulers for Big data processing in Hadoop environment: testing real-life schedulers using benchmark programs

Directory of Open Access Journals (Sweden)

Mohd Usama

2017-11-01

Full Text Available At present, big data is very popular, because it has proved to be much successful in many fields such as social media, E-commerce transactions, etc. Big data describes the tools and technologies needed to capture, manage, store, distribute, and analyze petabyte or larger-sized datasets having different structures with high speed. Big data can be structured, unstructured, or semi structured. Hadoop is an open source framework that is used to process large amounts of data in an inexpensive and efficient way, and job scheduling is a key factor for achieving high performance in big data processing. This paper gives an overview of big data and highlights the problems and challenges in big data. It then highlights Hadoop Distributed File System (HDFS, Hadoop MapReduce, and various parameters that affect the performance of job scheduling algorithms in big data such as Job Tracker, Task Tracker, Name Node, Data Node, etc. The primary purpose of this paper is to present a comparative study of job scheduling algorithms along with their experimental results in Hadoop environment. In addition, this paper describes the advantages, disadvantages, features, and drawbacks of various Hadoop job schedulers such as FIFO, Fair, capacity, Deadline Constraints, Delay, LATE, Resource Aware, etc, and provides a comparative study among these schedulers.

Urban Big Data and Sustainable Development Goals: Challenges and Opportunities

Directory of Open Access Journals (Sweden)

Ali Kharrazi

2016-12-01

Full Text Available Cities are perhaps one of the most challenging and yet enabling arenas for sustainable development goals. The Sustainable Development Goals (SDGs emphasize the need to monitor each goal through objective targets and indicators based on common denominators in the ability of countries to collect and maintain relevant standardized data. While this approach is aimed at harmonizing the SDGs at the national level, it presents unique challenges and opportunities for the development of innovative urban-level metrics through big data innovations. In this article, we make the case for advancing more innovative targets and indicators relevant to the SDGs through the emergence of urban big data. We believe that urban policy-makers are faced with unique opportunities to develop, experiment, and advance big data practices relevant to sustainable development. This can be achieved by situating the application of big data innovations through developing mayoral institutions for the governance of urban big data, advancing the culture and common skill sets for applying urban big data, and investing in specialized research and education programs.

Program plan for evaluation of the Ferrocyanide Waste Tank safety issue at the Hanford Site

International Nuclear Information System (INIS)

Borsheim, G.L.; Meacham, J.E.; Cash, R.J.; Dukelow, G.T.

1994-03-01

This document describes the background, priorities, strategy and logic, and task descriptions for the Ferrocyanide Waste Tank Safety Program. The Ferrocyanide Safety Program was established in 1990 to provide resolution of a major safety issue identified for 24 high-level radioactive waste tanks at the Hanford Site

Software programming languages for use in developing safety systems of nuclear power plant

Energy Technology Data Exchange (ETDEWEB)

Lee, Jang Soo

1997-07-01

This report provides guidance to a verifier on reviewing of programs for safety systems written in the high level languages, such as Ada, C, and C++. The focus of the report is on programming, not design, requirements engineering, or testing. We have defined the attributes, for example, reliability, robustness, traceability, and maintainability, which largely define a general quality of software related to safety. Although an extensive revision to the standard of Ada occurred in 1995, current compiler implementations are insufficiently mature to be considered for safety systems. The discussion on C program emphasized the problem in memory allocation and deallocation, pointers, control flow, and software interface. (author). 26 refs.

30 CFR 77.1708 - Safety program; instruction of persons employed at the mine.

Science.gov (United States)

2010-07-01

... at the mine. 77.1708 Section 77.1708 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES Miscellaneous § 77.1708 Safety program; instruction of persons...

A peer-to-peer traffic safety campaign program.

Science.gov (United States)

2014-06-01

The purpose of this project was to implement a peer-to-peer drivers safety program designed for high school students. : This project builds upon an effective peer-to-peer outreach effort in Texas entitled Teens in the Driver Seat (TDS), the : nati...

Construction safety program for the National Ignition Facility

Energy Technology Data Exchange (ETDEWEB)

Cerruti, S.J.

1997-06-26

The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF.

Construction safety program for the National Ignition Facility

International Nuclear Information System (INIS)

Cerruti, S.J.

1997-01-01

The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF

An Introduction of Behavior-Based Safety Program in Nuclear Power Plants

International Nuclear Information System (INIS)

Lee, Yong Hee; Lim, Hyeon Kyo

2011-01-01

There are many methods and approaches for a human error assessment that is valuable for investigating the causes of undesirable events and counter-plans to prevent their recurrence in the nuclear power plants (NPPs). There is behavior-based safety refers to the process of using a proactive approach to safety and health management. It either focuses on risk of behaviors that can lead to an injury, or on safe behaviors that can contribute to injury prevention. Early applications of behavior based safety included the construction and manufacturing industries, but today behavior based safety is applied to a wide variety of industries and service lines. This behavior based safety program can offer a set of significant human error countermeasures to be considered for human error in NPPs as well as other fields of industry. The current methods for the human error prevention in NPPs are several techniques such as Self-Check, Peer Check, Concurrent Verification, 3-way Communication, etc. However, it is not enough to grasp the whole human error problems in operations because the things are needed in fields are a behavior technique not a simple knowledge. Therefore, we applied a behavior based safety program on the current methods

Quarterly report on the Ferrocyanide Safety Program for the period ending, March 31, 1995

International Nuclear Information System (INIS)

Cash, R.J.; Meacham, J.E.; Dukelow, G.T.

1995-04-01

This quarterly report provides a status of the activities underway on the Ferrocyanide Safety Issue at the Hanford Site, including actions in response to Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 90-7 (FR 1990). In March 1991, a DNFSB implementation plan (Cash 1991) responding to the six parts of Recommendation 90-7 was prepared and sent to the DNFSB. A Ferrocyanide Safety Program Plan addressing the total Ferrocyanide Safety Program, including the six parts of DNFSB Recommendation 90-7, was released in October 1994 (DOE 1994b). Activities in the program plan are underway or have been completed, and the status of each is described in Sections 2.0 and 3.0 of this report

Mark I containment, short term program. Safety evaluation report

International Nuclear Information System (INIS)

1977-12-01

Presented is a Safety Evaluation Report (SER) prepared by the Office of Nuclear Reactor Regulation addressing the Short Term Program (STP) reassessment of the containment systems of operating Boiler Water Reactor (BWR) facilities with the Mark I containment system design. The information presented in this SER establishes the basis for the NRC staff's conclusion that licensed Mark I BWR facilities can continue to operate safely, without undue risk to the health and safety of the public, during an interim period of approximately two years while a methodical, comprehensive Long Term Program (LTP) is conducted. This SER also provides one of the basic foundations for the NRC staff review of the Mark I containment systems for facilities not yet licensed for operation

A practical guide to big data research in psychology.

Science.gov (United States)

Chen, Eric Evan; Wojcik, Sean P

2016-12-01

The massive volume of data that now covers a wide variety of human behaviors offers researchers in psychology an unprecedented opportunity to conduct innovative theory- and data-driven field research. This article is a practical guide to conducting big data research, covering data management, acquisition, processing, and analytics (including key supervised and unsupervised learning data mining methods). It is accompanied by walkthrough tutorials on data acquisition, text analysis with latent Dirichlet allocation topic modeling, and classification with support vector machines. Big data practitioners in academia, industry, and the community have built a comprehensive base of tools and knowledge that makes big data research accessible to researchers in a broad range of fields. However, big data research does require knowledge of software programming and a different analytical mindset. For those willing to acquire the requisite skills, innovative analyses of unexpected or previously untapped data sources can offer fresh ways to develop, test, and extend theories. When conducted with care and respect, big data research can become an essential complement to traditional research. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

WE-H-BRB-01: Overview of the ASTRO-NIH-AAPM 2015 Workshop On Exploring Opportunities for Radiation Oncology in the Era of Big Data

Energy Technology Data Exchange (ETDEWEB)

Benedict, S. [University of California Davis Medical Center (United States)

2016-06-15

Big Data in Radiation Oncology: (1) Overview of the NIH 2015 Big Data Workshop, (2) Where do we stand in the applications of big data in radiation oncology?, and (3) Learning Health Systems for Radiation Oncology: Needs and Challenges for Future Success The overriding goal of this trio panel of presentations is to improve awareness of the wide ranging opportunities for big data impact on patient quality care and enhancing potential for research and collaboration opportunities with NIH and a host of new big data initiatives. This presentation will also summarize the Big Data workshop that was held at the NIH Campus on August 13–14, 2015 and sponsored by AAPM, ASTRO, and NIH. The workshop included discussion of current Big Data cancer registry initiatives, safety and incident reporting systems, and other strategies that will have the greatest impact on radiation oncology research, quality assurance, safety, and outcomes analysis. Learning Objectives: To discuss current and future sources of big data for use in radiation oncology research To optimize our current data collection by adopting new strategies from outside radiation oncology To determine what new knowledge big data can provide for clinical decision support for personalized medicine L. Xing, NIH/NCI Google Inc.

WE-H-BRB-01: Overview of the ASTRO-NIH-AAPM 2015 Workshop On Exploring Opportunities for Radiation Oncology in the Era of Big Data

International Nuclear Information System (INIS)

Benedict, S.

2016-01-01

Big Data in Radiation Oncology: (1) Overview of the NIH 2015 Big Data Workshop, (2) Where do we stand in the applications of big data in radiation oncology?, and (3) Learning Health Systems for Radiation Oncology: Needs and Challenges for Future Success The overriding goal of this trio panel of presentations is to improve awareness of the wide ranging opportunities for big data impact on patient quality care and enhancing potential for research and collaboration opportunities with NIH and a host of new big data initiatives. This presentation will also summarize the Big Data workshop that was held at the NIH Campus on August 13–14, 2015 and sponsored by AAPM, ASTRO, and NIH. The workshop included discussion of current Big Data cancer registry initiatives, safety and incident reporting systems, and other strategies that will have the greatest impact on radiation oncology research, quality assurance, safety, and outcomes analysis. Learning Objectives: To discuss current and future sources of big data for use in radiation oncology research To optimize our current data collection by adopting new strategies from outside radiation oncology To determine what new knowledge big data can provide for clinical decision support for personalized medicine L. Xing, NIH/NCI Google Inc.

Privacy Protection Method in the Era of Cloud Computing and Big Data

Directory of Open Access Journals (Sweden)

Liu Ying

2015-01-01

Full Text Available Cloud Computing has become the academic and industrial hotspot in China in recent years. Cloud Computing can help business clients manage finance more conveniently and efficiently. It can also reduce the protection of privacy. In addition, its inherent deficiencies also hinder its application in the privacy protection, such as safety, different criteria, etc. This paper analyzes the application of cloud computing and big data in privacy protection and the existing problems, and therefore puts forward ways to promote the privacy protection in the era of cloud computing and big data.

Analyzing and strengthening the vaccine safety program in Manitoba.

Science.gov (United States)

Montalban, J M; Ogbuneke, C; Hilderman, T

2014-12-04

The emergence of a novel influenza A virus in 2009 and the rapid introduction of new pandemic vaccines prompted an analysis of the current state of the adverse events following immunization (AEFI) surveillance response in several provinces. To highlight aspects of the situational analysis of the Manitoba Health, Healthy Living and Seniors (MHHLS's) AEFI surveillance system and to demonstrate how common business techniques could be usefully applied to a provincial vaccine safety monitoring program. Situational analysis of the AEFI surveillance system in Manitoba was developed through a strengths-weaknesses-opportunities-threats (SWOT) analysis and informed by the National Immunization Strategy vaccine safety priorities. Strategy formulation was developed by applying the threats-opportunities-weaknesses-strengths (TOWS) matrix. Thirteen strategies were formulated that use strengths to either take advantage of opportunities or avoid threats, that exploit opportunities to overcome weaknesses, or that rectify weaknesses to circumvent threats. These strategies entailed the development of various tools and resources, most of which are either actively underway or completed. The SWOT analysis and the TOWS matrix enabled MHHLS to enhance the capacity of its vaccine safety program.

Big data

DEFF Research Database (Denmark)

Madsen, Anders Koed; Flyverbom, Mikkel; Hilbert, Martin

2016-01-01

is to outline a research agenda that can be used to raise a broader set of sociological and practice-oriented questions about the increasing datafication of international relations and politics. First, it proposes a way of conceptualizing big data that is broad enough to open fruitful investigations......The claim that big data can revolutionize strategy and governance in the context of international relations is increasingly hard to ignore. Scholars of international political sociology have mainly discussed this development through the themes of security and surveillance. The aim of this paper...... into the emerging use of big data in these contexts. This conceptualization includes the identification of three moments contained in any big data practice. Second, it suggests a research agenda built around a set of subthemes that each deserve dedicated scrutiny when studying the interplay between big data...

Forget the hype or reality. Big data presents new opportunities in Earth Science.

Science.gov (United States)

Lee, T. J.

2015-12-01

Earth science is arguably one of the most mature science discipline which constantly acquires, curates, and utilizes a large volume of data with diverse variety. We deal with big data before there is big data. For example, while developing the EOS program in the 1980s, the EOS data and information system (EOSDIS) was developed to manage the vast amount of data acquired by the EOS fleet of satellites. EOSDIS continues to be a shining example of modern science data systems in the past two decades. With the explosion of internet, the usage of social media, and the provision of sensors everywhere, the big data era has bring new challenges. First, Goggle developed the search algorithm and a distributed data management system. The open source communities quickly followed up and developed Hadoop file system to facility the map reduce workloads. The internet continues to generate tens of petabytes of data every day. There is a significant shortage of algorithms and knowledgeable manpower to mine the data. In response, the federal government developed the big data programs that fund research and development projects and training programs to tackle these new challenges. Meanwhile, comparatively to the internet data explosion, Earth science big data problem has become quite small. Nevertheless, the big data era presents an opportunity for Earth science to evolve. We learned about the MapReduce algorithms, in memory data mining, machine learning, graph analysis, and semantic web technologies. How do we apply these new technologies to our discipline and bring the hype to Earth? In this talk, I will discuss how we might want to apply some of the big data technologies to our discipline and solve many of our challenging problems. More importantly, I will propose new Earth science data system architecture to enable new type of scientific inquires.

The Nordic program for nuclear safety 1990-1993

International Nuclear Information System (INIS)

1991-02-01

The status of ongoing projects under The Nordic Program for Nuclear Safety (NKS) 1990-1993, and the economy of the programme is presented. A review of projects, projects managers and coordinators, and a list of members of NKS and associated members is included. (CLS)

Big data computing

CERN Document Server

Akerkar, Rajendra

2013-01-01

Due to market forces and technological evolution, Big Data computing is developing at an increasing rate. A wide variety of novel approaches and tools have emerged to tackle the challenges of Big Data, creating both more opportunities and more challenges for students and professionals in the field of data computation and analysis. Presenting a mix of industry cases and theory, Big Data Computing discusses the technical and practical issues related to Big Data in intelligent information management. Emphasizing the adoption and diffusion of Big Data tools and technologies in industry, the book i

From big bang to big crunch and beyond

International Nuclear Information System (INIS)

Elitzur, Shmuel; Rabinovici, Eliezer; Giveon, Amit; Kutasov, David

2002-01-01

We study a quotient Conformal Field Theory, which describes a 3+1 dimensional cosmological spacetime. Part of this spacetime is the Nappi-Witten (NW) universe, which starts at a 'big bang' singularity, expands and then contracts to a 'big crunch' singularity at a finite time. The gauged WZW model contains a number of copies of the NW spacetime, with each copy connected to the preceding one and to the next one at the respective big bang/big crunch singularities. The sequence of NW spacetimes is further connected at the singularities to a series of non-compact static regions with closed timelike curves. These regions contain boundaries, on which the observables of the theory live. This suggests a holographic interpretation of the physics. (author)

BIG data - BIG gains? Empirical evidence on the link between big data analytics and innovation

OpenAIRE

Niebel, Thomas; Rasel, Fabienne; Viete, Steffen

2017-01-01

This paper analyzes the relationship between firms’ use of big data analytics and their innovative performance in terms of product innovations. Since big data technologies provide new data information practices, they create novel decision-making possibilities, which are widely believed to support firms’ innovation process. Applying German firm-level data within a knowledge production function framework we find suggestive evidence that big data analytics is a relevant determinant for the likel...

Nuclear reactor safety program in U.S. Department of Energy and future perspectives

International Nuclear Information System (INIS)

Song, Y.T.

1987-01-01

The U.S. Department of Energy (DOE) establishes policy, issues orders, and assures compliance with requirements. The contractors who design, construct, modify, operate, maintain and decommission DOE reactors, set forth the assessment of the safety of cognizant reactors and impliment DOE orders. Teams of experts in the Depatment, through scheduled and unscheduled review programs, reassess the safety of reactors in every phases of their lives. As new technology develops, the safety programs are reevaluated and policies are modified to accommodate these new technologies. The diagnostic capabilities of the computer using multiple alarms to enhance detection of defects and control of a reactor have been greatly utilized in reactor operating systems. The application of artificial intelligence (AI) technologies for diagnostic and even for the decision making process in the event of reactor accidents would be one of the future trends in reactor safety programs. (author)

Identifying the Critical Factors Affecting Safety Program Performance for Construction Projects within Pakistan Construction Industry

Directory of Open Access Journals (Sweden)

Zubair Ahmed Memon

2013-04-01

Full Text Available Many studies have shown that the construction industry one of the most hazardous industries with its high rates of fatalities and injuries and high financial losses incurred through work related accident. To reduce or overcome the safety issues on construction sites, different safety programs are introduced by construction firms. A questionnaire survey study was conducted to highlight the influence of the Construction Safety Factors on safety program implementation. The input from the questionnaire survey was analyzed by using AIM (Average Index Method and rank correlation test was conducted between different groups of respondents to measure the association between different groups of respondent. The finding of this study highlighted that management support is the critical factor for implementing the safety program on projects. From statistical test, it is concluded that all respondent groups were strongly in the favor of management support factor as CSF (Critical Success Factor. The findings of this study were validated on selected case studies. Results of the case studies will help to know the effect of the factors on implementing safety programs during the execution stage.

Price-Anderson Nuclear Safety Enforcement Program. 1996 Annual report

International Nuclear Information System (INIS)

1996-01-01

This first annual report on DOE's Price Anderson Amendments Act enforcement program covers the activities, accomplishments, and planning for calendar year 1996. It also includes the infrastructure development activities of 1995. It encompasses the activities of the headquarters' Office of Enforcement in the Office of Environment, Safety and Health (EH) and Investigation and the coordinators and technical advisors in DOE's Field and Program Offices and other EH Offices. This report includes an overview of the enforcement program; noncompliances, investigations, and enforcement actions; summary of significant enforcement actions; examples where enforcement action was deferred; and changes and improvements to the program

Liquefied Gaseous Fuels Safety and Environmental Control Assessment Program: second status report

Energy Technology Data Exchange (ETDEWEB)

1980-10-01

The Assistant Secretary for Environment has responsibility for identifying, characterizing, and ameliorating the environmental, health, and safety issues and public concerns associated with commercial operation of specific energy systems. The need for developing a safety and environmental control assessment for liquefied gaseous fuels was identified by the Environmental and Safety Engineering Division as a result of discussions with various governmental, industry, and academic persons having expertise with respect to the particular materials involved: liquefied natural gas, liquefied petroleum gas, hydrogen, and anhydrous ammonia. This document is arranged in three volumes and reports on progress in the Liquefied Gaseous Fuels (LGF) Safety and Environmental Control Assessment Program made in Fiscal Year (FY)-1979 and early FY-1980. Volume 1 (Executive Summary) describes the background, purpose and organization of the LGF Program and contains summaries of the 25 reports presented in Volumes 2 and 3. Annotated bibliographies on Liquefied Natural Gas (LNG) Safety and Environmental Control Research and on Fire Safety and Hazards of Liquefied Petroleum Gas (LPG) are included in Volume 1.

Radiation safety and protection in US dental hygiene programs

International Nuclear Information System (INIS)

Farman, A.G.; Hunter, N.; Grammer, S.

1986-01-01

A survey of radiation safety and protection measures used by programs teaching dental hygiene indicated some areas for concern. No barriers or radiation shieldings were used between operator and patient in four programs. Radiation monitoring devices were not worn by faculty operators in 16% of the programs. Fewer than half of the programs used thyroid shields for patients on a routine basis. Insufficient filtration for the kilovolt peak employed was used by 14% of the programs, and for 19% more the filtration was unknown or unspecified. Three programs used closed cones. Rectangular collimation was not used at all by 63% of the programs, and only 20% used E speed film routinely. Quality assurance for equipment maintenance and for film processing were in place at only 54% and 49% of the programs, respectively

Alberta Environment's weir safety program : options for rehabilitation to improve public safety : a case study of the Calgary weir

Energy Technology Data Exchange (ETDEWEB)

Blakely, D. [Alberta Environment, Edmonton, AB (Canada)

2009-07-01

Alberta Environment Water Management Operations (WMO) owns and operates 46 dams and 800 kilometres of canals in Alberta. The WMO consists of 120 staff and several contract operators to take care of this infrastructure. Most of the infrastructure supplies water for irrigation use, which adds 5 billion dollars to the provincial economy annually. Other water uses include stock watering, domestic use, municipal use, recreational use and habitat. Alberta Environment's weir safety program was also discussed along with options for rehabilitation to improve public safety. A case study of Calgary's Weir Dam on the Bow River was highlighted. A brief history of the dam was offered and safety programs around provincially-owned weirs were discussed. Photographs were included to illustrate some of the additional safety measures at the Calgary weir, such as suspended safety buoys upstream of the boom directing paddlers to the portage trail, and signage on the river that can be activated when the boom is out. Typical river users on the Calgary Bow River and safety history at the Calgary Weir were discussed along with other topics such as the Calgary Bow River weir project criteria; project design progress; pre-feasibility options; scale modelling; final design analysis; construction funding; and proposed changes to the safety program for the new weir configuration. figs.

Bohunice Nuclear Power Plant Safety Upgrading Program

International Nuclear Information System (INIS)

Toth, A.; Fagula, L.

1996-01-01

Bohunice nuclear Power Plant generation represents almost 50% of the Slovak republic electric power production. Due to such high level of commitment to nuclear power in the power generation system, a special attention is given to safe and reliable operation of NPPs. Safety upgrading and operational reliability improvement of Bohunice V-1 NPP was carried out by the Bohunice staff continuously since the plant commissioning. In the 1990 - 1993 period extensive projects were realised. As a result of 'Small Reconstruction of the Bohunice V-1 NPP', the standards of both the nuclear safety and operational reliability have been significantly improved. The implementation of another modifications that will take place gradually during extended refuelling outages and overhauls in the course of 1996 through 1999, is referred to as the Gradual Reconstruction of the Bohunice V-1 Plant. The general goal of the V-1 NPP safety upgrading is the achievement of internationally acceptable level of nuclear safety. Extensive and financially demanding modification process of Bohunice V-2 NPP is likely to be implemented after a completion of the Gradual Reconstruction of the Bohunice V-1 NPP, since the year 1999. With this in mind, a first draft of the strategy of the Bohunice V-2 NPP upgrading program based on Probabilistic Safety assessment consideration was developed. A number of actions with a general effect on Bohunice site safety is evident. All these activities are aimed at reaching the essential objective of Bohunice NPP Management - to ensure a safe, reliable and effective electric energy and heat generation at the Bohunice site. (author)

UMTRA project office federal employee occupational safety and health program plan

International Nuclear Information System (INIS)

1994-06-01

This document establishes the Federal Employee Occupational Safety and Health (FEOSH) Program for the US Department of Energy (DOE) Uranium Mill Tailings Remedial Action (UMTRA) Project Office. This program will ensure compliance with applicable requirements of DOE Order 3790.1B and DOE Albuquerque Operations Office (AL) Order 3790.lA. FEOSH Program responsibilities delegated by the DOE-AL to the UMTRA Project Office by AL Order 3790.1A also are assigned. The UMTRA Project Office has developed the UMTRA Project Environmental, Safety, and Health (ES ampersand H) Plan (DOE, 1992), which establishes the basic programmatic ES ampersand H requirements for all participants on the UMTRA Project. The ES ampersand H plan is designed primarily to cover remedial action activities at UMTRA sites and defines the ES ampersand H responsibilities of both the UMTRA Project Office and its contractors. The UMTRA FEOSH Program described herein is a subset of the overall UMTRA ES ampersand H program and covers only federal employees working on the UMTRA Project

A summary description of the flammable gas tank safety program

International Nuclear Information System (INIS)

Johnson, G.D.; Sherwood, D.J.

1994-10-01

Radioactive liquid waste may produce hydrogen as result of the interaction of gamma radiation and water. If the waste contains organic chelating agents, additional hydrogen as well as nitrous oxide and ammonia may be produced by thermal and radiolytic decomposition of these organics. Several high-level radioactive liquid waste storage tanks, located underground at the Hanford Site in Washington State, are on a Flammable Gas Watch List. Some contain waste that produces and retains gases until large quantities of gas are released rapidly to the tank vapor space. Tanks nearly-filled to capacity have relatively little vapor space; therefore if the waste suddenly releases a large amount of hydrogen and nitrous oxide, a flammable gas mixture could result. The most notable example of a Hanford waste tank with a flammable gas problem is tank 241-SY-101. Upon occasion waste stored in this tank has released enough flammable gas to burn if an ignition source had been present inside of the tank. Several, other Hanford waste tanks exhibit similar behavior although to a lesser magnitude. Because this behavior was hot adequately-addressed in safety analysis reports for the Hanford Tank Farms, an unreviewed safety question was declared, and in 1990 the Flammable Gas Tank Safety Program was established to address this problem. The purposes of the program are a follows: (1) Provide safety documents to fill gaps in the safety analysis reports, and (2) Resolve the safety issue by acquiring knowledge about gas retention and release from radioactive liquid waste and developing mitigation technology. This document provides the general logic and work activities required to resolve the unreviewed safety question and the safety issue of flammable gas mixtures in radioactive liquid waste storage tanks

Technical specification optimization program - engineered safety features

International Nuclear Information System (INIS)

Andre, G.R.; Jansen, R.L.

1986-01-01

The Westinghouse Technical Specification Program (TOP) was designed to evaluate on a quantitative basis revisions to Nuclear Power Plant Technical Specifications. The revisions are directed at simplifying plant operation, and reducing unnecessary transients, shutdowns, and manpower requirements. In conjunction with the Westinghouse Owners Group, Westinghouse initiated a program to develop a methodology to justify Technical Specification revisions; particularly revisions related to testing and maintenance requirements on plant operation for instrumentation systems. The methodology was originally developed and applied to the reactor trip features of the reactor protection system (RPS). The current study further refined the methodology and applied it to the engineered safety features of the RPS

IMPLEMENTATION OF A SAFETY PROGRAM FOR THE WORK ACCIDENTS’ CONTROL. A CASE STUDY IN THE CHEMICAL INDUSTRY

Directory of Open Access Journals (Sweden)

Edison Cesar de Faria Nogueira

2015-03-01

Full Text Available This article presents a case study related to the implementation of a Work Safety Program in a chemical industry, based on the Process Safety Program, PSP, of a huge energy company. The research was applied, exploratory, qualitative and with and data collection method through documentary and bibliographical research. There will be presented the main practices adopted in order to make the Safety Program a reality inside a chemical industry, its results and contributions for its better development. This paper proposes the implementation of a Safety Program must be preceded by a diagnosis of occupational safety and health management system and with constant critical analysis in order to make the necessary adjustments.

The Role and Quality of Software Safety in the NASA Constellation Program

Science.gov (United States)

Layman, Lucas; Basili, Victor R.; Zelkowitz, Marvin V.

2010-01-01

In this study, we examine software safety risk in the early design phase of the NASA Constellation spaceflight program. Obtaining an accurate, program-wide picture of software safety risk is difficult across multiple, independently-developing systems. We leverage one source of safety information, hazard analysis, to provide NASA quality assurance managers with information regarding the ongoing state of software safety across the program. The goal of this research is two-fold: 1) to quantify the relative importance of software with respect to system safety; and 2) to quantify the level of risk presented by software in the hazard analysis. We examined 154 hazard reports created during the preliminary design phase of three major flight hardware systems within the Constellation program. To quantify the importance of software, we collected metrics based on the number of software-related causes and controls of hazardous conditions. To quantify the level of risk presented by software, we created a metric scheme to measure the specificity of these software causes. We found that from 49-70% of hazardous conditions in the three systems could be caused by software or software was involved in the prevention of the hazardous condition. We also found that 12-17% of the 2013 hazard causes involved software, and that 23-29% of all causes had a software control. Furthermore, 10-12% of all controls were software-based. There is potential for inaccuracy in these counts, however, as software causes are not consistently scoped, and the presence of software in a cause or control is not always clear. The application of our software specificity metrics also identified risks in the hazard reporting process. In particular, we found a number of traceability risks in the hazard reports may impede verification of software and system safety.

Evaluation of the League General Insurance Company child safety seat distribution program

Science.gov (United States)

1982-05-01

This report presents an evaluation of the child safety seat distribution initiated by the League General Insurance Company in June 1979. The program provides child safety seats as a benefit under the company's auto insurance policies to policy-holder...

The Big Fish Down Under: Examining Moderators of the "Big-Fish-Little-Pond" Effect for Australia's High Achievers

Science.gov (United States)

Seaton, Marjorie; Marsh, Herbert W.; Yeung, Alexander Seeshing; Craven, Rhonda

2011-01-01

Big-fish-little-pond effect (BFLPE) research has demonstrated that academic self-concept is negatively affected by attending high-ability schools. This article examines data from large, representative samples of 15-year-olds from each Australian state, based on the three Program for International Student Assessment (PISA) databases that focus on…

Analyzing and strengthening the vaccine safety program in Manitoba

Science.gov (United States)

Montalban, JM; Ogbuneke, C; Hilderman, T

2014-01-01

Background: The emergence of a novel influenza A virus in 2009 and the rapid introduction of new pandemic vaccines prompted an analysis of the current state of the adverse events following immunization (AEFI) surveillance response in several provinces. Objectives To highlight aspects of the situational analysis of the Manitoba Health, Healthy Living and Seniors (MHHLS’s) AEFI surveillance system and to demonstrate how common business techniques could be usefully applied to a provincial vaccine safety monitoring program. Method Situational analysis of the AEFI surveillance system in Manitoba was developed through a strengths-weaknesses-opportunities-threats (SWOT) analysis and informed by the National Immunization Strategy vaccine safety priorities. Strategy formulation was developed by applying the threats-opportunities-weaknesses-strengths (TOWS) matrix. Results Thirteen strategies were formulated that use strengths to either take advantage of opportunities or avoid threats, that exploit opportunities to overcome weaknesses, or that rectify weaknesses to circumvent threats. These strategies entailed the development of various tools and resources, most of which are either actively underway or completed. Conclusion The SWOT analysis and the TOWS matrix enabled MHHLS to enhance the capacity of its vaccine safety program. PMID:29769910

[Evaluating training programs on occupational health and safety: questionnaire development].

Science.gov (United States)

Zhou, Xiao-Yan; Wang, Zhi-Ming; Wang, Mian-Zhen

2006-03-01

To develop a questionnaire to evaluate the quality of training programs on occupational health and safety. A questionnaire comprising five subscales and 21 items was developed. The reliability and validity of the questionnaire was tested. Final validation of the questionnaire was undertaken in 700 workers in an oil refining company. The Cronbach's alpha coefficients of the five subscales ranged from 0.6194 to 0.6611. The subscale-scale Pearson correlation coefficients ranged from 0.568 to 0.834 . The theta coefficients of the five subscales were greater than 0.7. The factor loadings of the five subscales in the principal component analysis ranged from 0.731 to 0.855. Use of the questionnaire in the 700 workers produced a good discriminability, with excellent, good, fair and poor comprising 22.2%, 31.2%, 32.4% and 14.1 respectively. Given the fact that 18.7% of workers had never been trained and 29.7% of workers got one-off training only, the training program scored an average of 57.2. The questionnaire is suitable to be used in evaluating the quality of training programs on occupational health and safety. The oil refining company needs to improve training for their workers on occupational health and safety.

Benchmarking Big Data Systems and the BigData Top100 List.

Science.gov (United States)

Baru, Chaitanya; Bhandarkar, Milind; Nambiar, Raghunath; Poess, Meikel; Rabl, Tilmann

2013-03-01

"Big data" has become a major force of innovation across enterprises of all sizes. New platforms with increasingly more features for managing big datasets are being announced almost on a weekly basis. Yet, there is currently a lack of any means of comparability among such platforms. While the performance of traditional database systems is well understood and measured by long-established institutions such as the Transaction Processing Performance Council (TCP), there is neither a clear definition of the performance of big data systems nor a generally agreed upon metric for comparing these systems. In this article, we describe a community-based effort for defining a big data benchmark. Over the past year, a Big Data Benchmarking Community has become established in order to fill this void. The effort focuses on defining an end-to-end application-layer benchmark for measuring the performance of big data applications, with the ability to easily adapt the benchmark specification to evolving challenges in the big data space. This article describes the efforts that have been undertaken thus far toward the definition of a BigData Top100 List. While highlighting the major technical as well as organizational challenges, through this article, we also solicit community input into this process.

Quality and Safety Assurance - Priority Task at Nuclear Power Projects Implementation

International Nuclear Information System (INIS)

Nenkova, B.; Manchev, B.; Tomov, E.

2010-01-01

safety standards at implementation of complex energy projects. Experience is shared on the basis of implementation of the Units 5 and 6 Modernization Program of Kozloduy NPP and the project 'Construction of Belene NPP'. Examples are given related to the definite quality improvement goals achievement in case of participation of big multinational and international companies.(author).

Fusion Reactor Safety Research program. Annual report, FY-80

International Nuclear Information System (INIS)

Crocker, J.G.; Cohen, S.

1981-06-01

The report is in three sections. Outside contracts includes a report of newly-started study at the General Atomic Company to consider safety implications of low-activation materials, portions of two papers from ongoing work at PNL and ANL, reports of the lithium spill work at HEDL, the LITFIRE code development at MIT, and risk assessment at MIT, all of which are an expansion of FY-79 outside contracts. EG and G Activities includes adaptations of four papers of ongoing work in transient code development, tritium system risk assessment, heat transfer and fluid flow analysis, and fusion safety data base. Program Plan Development includes the Executive Summary of the Plan, which was completed in FY-80, and is accompanied by a list of publications and a brief outline of proposed FY-81 activities to be based on the Program Plan

From Safety Critical Java Programs to Timed Process Models

DEFF Research Database (Denmark)

Thomsen, Bent; Luckow, Kasper Søe; Thomsen, Lone Leth

2015-01-01

frameworks, we have in recent years pursued an agenda of translating hard-real-time embedded safety critical programs written in the Safety Critical Java Profile [33] into networks of timed automata [4] and subjecting those to automated analysis using the UPPAAL model checker [10]. Several tools have been...... built and the tools have been used to analyse a number of systems for properties such as worst case execution time, schedulability and energy optimization [12–14,19,34,36,38]. In this paper we will elaborate on the theoretical underpinning of the translation from Java programs to timed automata models...... and briefly summarize some of the results based on this translation. Furthermore, we discuss future work, especially relations to the work in [16,24] as Java recently has adopted first class higher order functions in the form of lambda abstractions....

A Study of the Application of Big Data in a Rural Comprehensive Information Service

Directory of Open Access Journals (Sweden)

Leifeng Guo

2015-05-01

Full Text Available Big data has attracted extensive interest due to its potential tremendous social and scientific value. Researchers are also trying to extract potential value from agriculture big data. This paper presents a study of information services based on big data from the perspective of a rural comprehensive information service. First, we introduce the background of the rural comprehensive information service, and then we present in detail the National Rural Comprehensive Information Service Platform (NRCISP, which is supported by the national science and technology support program. Next, we discuss big data in the NRCISP according to data characteristics, data sources, and data processing. Finally, we discuss a service model and services based on big data in the NRCISP.

Big data, big knowledge: big data for personalized healthcare.

Science.gov (United States)

Viceconti, Marco; Hunter, Peter; Hose, Rod

2015-07-01

The idea that the purely phenomenological knowledge that we can extract by analyzing large amounts of data can be useful in healthcare seems to contradict the desire of VPH researchers to build detailed mechanistic models for individual patients. But in practice no model is ever entirely phenomenological or entirely mechanistic. We propose in this position paper that big data analytics can be successfully combined with VPH technologies to produce robust and effective in silico medicine solutions. In order to do this, big data technologies must be further developed to cope with some specific requirements that emerge from this application. Such requirements are: working with sensitive data; analytics of complex and heterogeneous data spaces, including nontextual information; distributed data management under security and performance constraints; specialized analytics to integrate bioinformatics and systems biology information with clinical observations at tissue, organ and organisms scales; and specialized analytics to define the "physiological envelope" during the daily life of each patient. These domain-specific requirements suggest a need for targeted funding, in which big data technologies for in silico medicine becomes the research priority.

BigDataBench: a Big Data Benchmark Suite from Internet Services

OpenAIRE

Wang, Lei; Zhan, Jianfeng; Luo, Chunjie; Zhu, Yuqing; Yang, Qiang; He, Yongqiang; Gao, Wanling; Jia, Zhen; Shi, Yingjie; Zhang, Shujie; Zheng, Chen; Lu, Gang; Zhan, Kent; Li, Xiaona; Qiu, Bizhu

2014-01-01

As architecture, systems, and data management communities pay greater attention to innovative big data systems and architectures, the pressure of benchmarking and evaluating these systems rises. Considering the broad use of big data systems, big data benchmarks must include diversity of data and workloads. Most of the state-of-the-art big data benchmarking efforts target evaluating specific types of applications or system software stacks, and hence they are not qualified for serving the purpo...

Conociendo Big Data

Directory of Open Access Journals (Sweden)

Juan José Camargo-Vega

2014-12-01

Full Text Available Teniendo en cuenta la importancia que ha adquirido el término Big Data, la presente investigación buscó estudiar y analizar de manera exhaustiva el estado del arte del Big Data; además, y como segundo objetivo, analizó las características, las herramientas, las tecnologías, los modelos y los estándares relacionados con Big Data, y por último buscó identificar las características más relevantes en la gestión de Big Data, para que con ello se pueda conocer todo lo concerniente al tema central de la investigación.La metodología utilizada incluyó revisar el estado del arte de Big Data y enseñar su situación actual; conocer las tecnologías de Big Data; presentar algunas de las bases de datos NoSQL, que son las que permiten procesar datos con formatos no estructurados, y mostrar los modelos de datos y las tecnologías de análisis de ellos, para terminar con algunos beneficios de Big Data.El diseño metodológico usado para la investigación fue no experimental, pues no se manipulan variables, y de tipo exploratorio, debido a que con esta investigación se empieza a conocer el ambiente del Big Data.

Safety analysis report for packaging (onsite) transuranic performance demonstration program sample packaging

International Nuclear Information System (INIS)

Mccoy, J.C.

1997-01-01

The Transuranic Performance Demonstration Program (TPDP) sample packaging is used to transport highway route controlled quantities of weapons grade (WG) plutonium samples from the Plutonium Finishing Plant (PFP) to the Waste Receiving and Processing (WRAP) facility and back. The purpose of these shipments is to test the nondestructive assay equipment in the WRAP facility as part of the Nondestructive Waste Assay PDP. The PDP is part of the U. S. Department of Energy (DOE) National TRU Program managed by the U. S. Department of Energy, Carlsbad Area Office, Carlsbad, New Mexico. Details of this program are found in CAO-94-1045, Performance Demonstration Program Plan for Nondestructive Assay for the TRU Waste Characterization Program (CAO 1994); INEL-96/0129, Design of Benign Matrix Drums for the Non-Destructive Assay Performance Demonstration Program for the National TRU Program (INEL 1996a); and INEL-96/0245, Design of Phase 1 Radioactive Working Reference Materials for the Nondestructive Assay Performance Demonstration Program for the National TRU Program (INEL 1996b). Other program documentation is maintained by the national TRU program and each DOE site participating in the program. This safety analysis report for packaging (SARP) provides the analyses and evaluations necessary to demonstrate that the TRU PDP sample packaging meets the onsite transportation safety requirements of WHC-CM-2-14, Hazardous Material Packaging and Shipping, for an onsite Transportation Hazard Indicator (THI) 2 packaging. This SARP, however, does not include evaluation of any operations within the PFP or WRAP facilities, including handling, maintenance, storage, or operating requirements, except as they apply directly to transportation between the gate of PFP and the gate of the WRAP facility. All other activities are subject to the requirements of the facility safety analysis reports (FSAR) of the PFP or WRAP facility and requirements of the PDP

DOE high-level waste tank safety program Final report, Task 002

International Nuclear Information System (INIS)

1998-01-01

The overall objective of the work on Task 002 was to provide LANL with support to the DOE High-Level Waste Tank Safety program. The objective of the work was to develop safety documentation in support of the unsafe tank mitigation activities at Hanford. The work includes the development of safety assessment and an environmental assessment. All tasks which were assigned under this Task Order were completed. Descriptions of the objectives of each task and effort performed to complete each objective are provided. The two tasks were: Task 2.1--safety assessment for instrumentation insertion; and Task 2.2--environmental assessment

Seismic Safety Margins Research Program: a concluding look

International Nuclear Information System (INIS)

Cummings, G.E.

1984-01-01

The Seismic Safety Margins Research Program (SSMRP) was started in 1978 with the goal of developing tools and data bases to compute the probability of earthquake - caused radioactive release from commercial nuclear power plants. These tools and data bases were to help NRC to assess seismic safety at nuclear plants. The methodology to be used was finalized in 1982 and applied to the Zion Nuclear Power Station. The SSMRP will be completed this year with the development of a more simplified method of analysis and a demonstration of its use on Zion. This simplified method is also being applied to a boiling-water-reactor, LaSalle

Quarterly report on the Ferrocyanide Safety Program for the period ending June 30, 1995

International Nuclear Information System (INIS)

Meacham, J.E.; Cash, R.J.; Dukelow, G.T.

1995-07-01

This is the seventeenth quarterly report on the progress of activities addressing the Ferrocyanide Safety Issue associated with Hanford Site high-level radioactive waste tanks. Progress in the Ferrocyanide Safety Program is reviewed, including work addressing the six pans of Defense Nuclear Facilities Safety Board Recommendation 90-7 (FR 1990). All work activities are described in the revised program plan (DOE 1994b), and this report follows the same format presented there. A summary of the key events occurring this quarter is presented

Job schedulers for Big data processing in Hadoop environment: testing real-life schedulers using benchmark programs

OpenAIRE

Mohd Usama; Mengchen Liu; Min Chen

2017-01-01

At present, big data is very popular, because it has proved to be much successful in many fields such as social media, E-commerce transactions, etc. Big data describes the tools and technologies needed to capture, manage, store, distribute, and analyze petabyte or larger-sized datasets having different structures with high speed. Big data can be structured, unstructured, or semi structured. Hadoop is an open source framework that is used to process large amounts of data in an inexpensive and ...

Liquefied gaseous fuels safety and environmental control assessment program: third status report

Energy Technology Data Exchange (ETDEWEB)

1982-03-01

This Status Report contains contributions from all contractors currently participating in the DOE Liquefied Gaseous Fuels (LG) Safety and Environmental Control Assessment Program and is presented in two principal sections. Section I is an Executive Summary of work done by all program participants. Section II is a presentation of fourteen individual reports (A through N) on specific LGF Program activities. The emphasis of Section II is on research conducted by Lawrence Livermore National Laboratory (Reports A through M). Report N, an annotated bibliography of literature related to LNG safety and environmental control, was prepared by Pacific Northwest Laboratory (PNL) as part of its LGF Safety Studies Project. Other organizations who contributed to this Status Report are Aerojet Energy Conversion Company; Applied Technology Corporation; Arthur D. Little, Incorporated; C/sub v/ International, Incorporated; Institute of Gas Technology; and Massachusetts Institute of Technology. Separate abstracts have been prepared for Reports A through N for inclusion in the Energy Data Base.

EUMENES, a computer software for managing the radiation safety program information at an institutional level

International Nuclear Information System (INIS)

Hernandez Saiz, Alejandro; Cornejo Diaz, Nestor; Valdes Ramos, Maryzury; Martinez Gonzalez, Alina; Gonzalez Rodriguez, Niurka; Vergara Gil, Alex

2008-01-01

The correct application of national and international regulations in the field of Radiological Safety requires the implementation of Radiation Safety Programs appropriate to the developed practice. These Programs demand the preparation and keeping of an important number of records and data, the compliance with working schedules, systematic quality controls, audits, delivery of information to the Regulatory Authority, the execution of radiological assessments, etc. Therefore, it is unquestionable the necessity and importance of having a computer tool to support the management of the information related to the Radiation Safety Program in any institution. The present work describes a computer program that allows the efficient management of these data. Its design was based on the IAEA International Basic Safety Standards recommendations and on the requirements of the Cuban national standards, with the objective of being flexible enough to be applied in most of the institutions using ionizing radiations. The most important records of Radiation Safety Programs were incorporated and reports can be generated by the users. An additional tools-module allows the user to access to a radionuclide data library, and to carry out different calculations of interest in radiological protection. The program has been developed in Borland Delphi and manages Microsoft Access databases. It is a user friendly code that aims to support the optimization of Radiation Safety Programs. The program contributes to save resources and time, as the generated information is electronically kept and transmitted. The code has different security access levels according to the user responsibility at the institution and also provides for the analysis of the introduced data, in a quick and efficient way, as well as to notice deadlines, the exceeding of reference levels and situations that require attention. (author)

Development of computer program for safety of nuclear power plant against tsunami

International Nuclear Information System (INIS)

Jin, S. B.; Choi, K. R.; Lee, S. K.; Cho, Y. S.

2001-01-01

The main objective of this study is the development of a computer program to check the safety of nuclear power plants along the coastline of the Korean Peninsula. The computer program describes the propagation and associated run-up process of tsunamis by solving linear and nonlinear shallow-water equations with finite difference methods. The computer program has been applied to several ideal and simplified problems. Obtained numerical solutions are compared to existing and available solutions and measurements. A very good agreement between numerical solutions and existing measurement is observed. The computer program developed in this study can be to check the safety analysis of nuclear power plants against tsunamis. The program can also be used to study the propagation of tsunamis for a long distance, and associated run-up and run-down process along a shoreline. Furthermore, the computer program can be used to provide the proper design criteria of coastal facilities and structures

The association between event learning and continuous quality improvement programs and culture of patient safety.

Science.gov (United States)

Mazur, Lukasz; Chera, Bhishamjit; Mosaly, Prithima; Taylor, Kinley; Tracton, Gregg; Johnson, Kendra; Comitz, Elizabeth; Adams, Robert; Pooya, Pegah; Ivy, Julie; Rockwell, John; Marks, Lawrence B

2015-01-01

To present our approach and results from our quality and safety program and to report their possible impact on our culture of patient safety. We created an event learning system (termed a "good catch" program) and encouraged staff to report any quality or safety concerns in real time. Events were analyzed to assess the utility of safety barriers. A formal continuous quality improvement program was created to address these reported events and make improvements. Data on perceptions of the culture of patient safety were collected using the Agency for Health Care Research and Quality survey administered before, during, and after the initiatives. Of 560 good catches reported, 367 could be ascribed to a specific step on our process map. The calculated utility of safety barriers was highest for those embedded into the pretreatment quality assurance checks performed by physicists and dosimetrists (utility score 0.53; 93 of 174) and routine checks done by therapists on the initial day of therapy. Therapists and physicists reported the highest number of good catches (24% each). Sixty-four percent of events were caused by performance issues (eg, not following standardized processes, including suboptimal communications). Of 31 initiated formal improvement events, 26 were successfully implemented and sustained, 4 were discontinued, and 1 was not implemented. Most of the continuous quality improvement program was conducted by nurses (14) and therapists (7). Percentages of positive responses in the patient safety culture survey appear to have increased on all dimensions (p continuous quality improvement programs can be successfully implemented and that there are contemporaneous improvements in the culture of safety. Copyright © 2015 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.

Nuclear data needs within the U. S. Nuclear Criticality Safety program

International Nuclear Information System (INIS)

McKnight, R.D.; Dunn, M.E.; Little, R.C.; Felty, J.R.; McKamy, J.N.

2008-01-01

This paper will present the nuclear data needs currently identified within the US Nuclear Criticality Safety Program (NCSP). It will identify the priority data needs; it will describe the process of prioritizing those needs; and it will provide brief examples of recent data advances which have successfully addressed some of the priority criticality safety data needs.

Characterizing Big Data Management

Directory of Open Access Journals (Sweden)

Rogério Rossi

2015-06-01

Full Text Available Big data management is a reality for an increasing number of organizations in many areas and represents a set of challenges involving big data modeling, storage and retrieval, analysis and visualization. However, technological resources, people and processes are crucial to facilitate the management of big data in any kind of organization, allowing information and knowledge from a large volume of data to support decision-making. Big data management can be supported by these three dimensions: technology, people and processes. Hence, this article discusses these dimensions: the technological dimension that is related to storage, analytics and visualization of big data; the human aspects of big data; and, in addition, the process management dimension that involves in a technological and business approach the aspects of big data management.

Big science

CERN Multimedia

Nadis, S

2003-01-01

" "Big science" is moving into astronomy, bringing large experimental teams, multi-year research projects, and big budgets. If this is the wave of the future, why are some astronomers bucking the trend?" (2 pages).

Food Safety Programs Based on HACCP Principles in School Nutrition Programs: Implementation Status and Factors Related to Implementation

Science.gov (United States)

Stinson, Wendy Bounds; Carr, Deborah; Nettles, Mary Frances; Johnson, James T.

2011-01-01

Purpose/Objectives: The objectives of this study were to assess the extent to which school nutrition (SN) programs have implemented food safety programs based on Hazard Analysis and Critical Control Point (HACCP) principles, as well as factors, barriers, and practices related to implementation of these programs. Methods: An online survey was…

Risk Perceptions That Effect Behavior and Attitudes in Safety Programs

Science.gov (United States)

2004-01-01

Turner, B.A. (1978), Man-made Disasters. London, Wykeham. Van Manen , Max. 1990. Reasearching lived experience: Human Science for an Action Sensitive Pedagogy. New York: State University of New York. ...question guided the study: (1) what factors determine a successful safety program? METHOD In my approach I used Phenomenological inquiry...method employed tried to capture the “essence” of lived experiences, which may have an impact on aviation safety. In Max Van Manen’s book

Space Nuclear Safety Program. Progress report, March 1984

International Nuclear Information System (INIS)

Zocher, R.W.; George, T.G.

1985-08-01

This technical monthly report covers studies related to the use of 238 PuO 2 in radioisotope power systems carried out for the Office of Special Nuclear Projects of the US Department of Energy by Los Alamos Laboratory. They are divided into: general-purpose heat source, lightweight radioisotope heater unit, and safety technology program. 43 figs., 2 tabs

Big bang and big crunch in matrix string theory

OpenAIRE

Bedford, J; Papageorgakis, C; Rodríguez-Gómez, D; Ward, J

2007-01-01

Following the holographic description of linear dilaton null Cosmologies with a Big Bang in terms of Matrix String Theory put forward by Craps, Sethi and Verlinde, we propose an extended background describing a Universe including both Big Bang and Big Crunch singularities. This belongs to a class of exact string backgrounds and is perturbative in the string coupling far away from the singularities, both of which can be resolved using Matrix String Theory. We provide a simple theory capable of...

Safety program of the Oak Ridge National Laboratory: a different approach

International Nuclear Information System (INIS)

Burger, G.H.

1981-01-01

The uniqueness and therefore different approach to Oak Ridge National Laboratory's safety program is not a result of elimination of the usual industrial safety organization, but results from the three organizations which supplement it and the areas of safety concerns that they cover. While industrial safety is primarily concerned with day-to-day routine worker activities (wearing of safety glasses and hard hats, adherence to electrical safety work procedures, proper safety lockout and tagout of equipment for maintenance activities, etc.), the other organizations, the Office of Operational Safety, Division Safety Officers and Radiation Control Officers, and the Laboratory director's Review Committees, are concerned with themuch broader spectrum of the total work environment. These organizations are concerned not only with the day-to-day worker activities but the design and conduction of all operations from a process viewpoint. The emphasis of these groups is assuring first that operations, experiments, facilities, etc., are designed properly and then secondly operated properly to assure safety of the operators, Laboratory population, and the public. Responsibilities of the three safety organizations constituting operational or process safety are described and discussed

Bliver big data til big business?

DEFF Research Database (Denmark)

Ritter, Thomas

2015-01-01

Danmark har en digital infrastruktur, en registreringskultur og it-kompetente medarbejdere og kunder, som muliggør en førerposition, men kun hvis virksomhederne gør sig klar til næste big data-bølge.......Danmark har en digital infrastruktur, en registreringskultur og it-kompetente medarbejdere og kunder, som muliggør en førerposition, men kun hvis virksomhederne gør sig klar til næste big data-bølge....

Big data uncertainties.

Science.gov (United States)

Maugis, Pierre-André G

2018-07-01

Big data-the idea that an always-larger volume of information is being constantly recorded-suggests that new problems can now be subjected to scientific scrutiny. However, can classical statistical methods be used directly on big data? We analyze the problem by looking at two known pitfalls of big datasets. First, that they are biased, in the sense that they do not offer a complete view of the populations under consideration. Second, that they present a weak but pervasive level of dependence between all their components. In both cases we observe that the uncertainty of the conclusion obtained by statistical methods is increased when used on big data, either because of a systematic error (bias), or because of a larger degree of randomness (increased variance). We argue that the key challenge raised by big data is not only how to use big data to tackle new problems, but to develop tools and methods able to rigorously articulate the new risks therein. Copyright © 2016. Published by Elsevier Ltd.

Uranium Mill Tailings Remedial Action Project Safety Advancement Field Effort (SAFE) Program

Energy Technology Data Exchange (ETDEWEB)

1994-02-01

In 1992, the Uranium Mill Tailings Remedial Action (UMTRA) Project experienced several health and safety related incidents at active remediation project sites. As a result, the U.S. Department of Energy (DOE) directed the Technical Assistance Contractor (TAC) to establish a program increasing the DOE`s overall presence at operational remediation sites to identify and minimize risks in operations to the fullest extent possible (Attachments A and B). In response, the TAC, in cooperation with the DOE and the Remedial Action Contractor (RAC), developed the Safety Advancement Field Effort (SAFE) Program.

Uranium Mill Tailings Remedial Action Project Safety Advancement Field Effort (SAFE) Program

International Nuclear Information System (INIS)

1994-02-01

In 1992, the Uranium Mill Tailings Remedial Action (UMTRA) Project experienced several health and safety related incidents at active remediation project sites. As a result, the U.S. Department of Energy (DOE) directed the Technical Assistance Contractor (TAC) to establish a program increasing the DOE's overall presence at operational remediation sites to identify and minimize risks in operations to the fullest extent possible (Attachments A and B). In response, the TAC, in cooperation with the DOE and the Remedial Action Contractor (RAC), developed the Safety Advancement Field Effort (SAFE) Program

Electrical Safety Program: Nonelectrical Crafts at LANL, Live #12175

Energy Technology Data Exchange (ETDEWEB)

Glass, George [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-12-22

Los Alamos National Laboratory (LANL) and the federal government require those working with or near electrical equipment to be trained on electrical hazards and how to avoid them. Although you might not be trained to work on electrical systems, your understanding of electricity, how it can hurt you, and what precautions to take when working near electricity could save you or others from injury or death. This course, Electrical Safety Program: Nonelectrical Crafts at LANL (12175), provides knowledge of basic electrical concepts, such as current, voltage, and resistance, and their relationship to each other. You will learn how to apply these concepts to safe work practices while learning about the dangers of electricity—and associated hazards—that you may encounter on the job. The course also discusses what you can do to prevent electrical accidents and what you should do in the event of an electrical emergency. The LANL Electrical Safety Program is defined by LANL Procedure (P) 101-13. An electrical safety officer (ESO) is well versed in this document and should be consulted regarding electrical questions. Appointed by the responsible line manager (RLM), ESOs can tell you if a piece of equipment or an operation is safe or how to make it safe.

Waste isolation safety assessment program

International Nuclear Information System (INIS)

Brandstetter, A.; Harwell, M.A.

1979-05-01

Associated with commercial nuclear power production in the United States is the generation of potentially hazardous radioactive wastes. The Department of Energy (DOE), through the National Waste Terminal Storage (NWTS) Program, is seeking to develop nuclear waste isolation systems in geologic formations that will preclude contact with the biosphere of waste radionuclides in concentrations which are sufficient to cause deleterious impact on humans or their environments. Comprehensive analyses of specific isolation systems are needed to assess the expectations of meeting that objective. The Waste Isolation Safety Assessment Program (WISAP) has been established at the Pacific Northwest Laboratory (operated by Battelle Memorial Institute) for developing the capability of making those analyses. Among the analyses required for isolation system evaluation is the detailed assessment of the post-closure performance of nuclear waste repositories in geologic formations. This assessment is essential, since it is concerned with aspects of the nuclear power program which previously have not been addressed. Specifically, the nature of the isolation systems (e.g., involving breach scenarios and transport through the geosphere), and the time-scales necessary for isolation, dictate the development, demonstration and application of novel assessment capabilities. The assessment methodology needs to be thorough, flexible, objective, and scientifically defensible. Further, the data utilized must be accurate, documented, reproducible, and based on sound scientific principles

System safety program plan for the Isotope Brayton Ground Demonstration System (phase I)

International Nuclear Information System (INIS)

1976-01-01

The safety engineering effort to be undertaken in achieving an acceptable level of safety in the Brayton Isotope Power System (BIPS) development program is discussed. The safety organizational relationships, the methods to be used, the tasks to be completed, and the documentation to be published are described. The plan will be updated periodically as the need arises

Big data science: A literature review of nursing research exemplars.

Science.gov (United States)

Westra, Bonnie L; Sylvia, Martha; Weinfurter, Elizabeth F; Pruinelli, Lisiane; Park, Jung In; Dodd, Dianna; Keenan, Gail M; Senk, Patricia; Richesson, Rachel L; Baukner, Vicki; Cruz, Christopher; Gao, Grace; Whittenburg, Luann; Delaney, Connie W

Big data and cutting-edge analytic methods in nursing research challenge nurse scientists to extend the data sources and analytic methods used for discovering and translating knowledge. The purpose of this study was to identify, analyze, and synthesize exemplars of big data nursing research applied to practice and disseminated in key nursing informatics, general biomedical informatics, and nursing research journals. A literature review of studies published between 2009 and 2015. There were 650 journal articles identified in 17 key nursing informatics, general biomedical informatics, and nursing research journals in the Web of Science database. After screening for inclusion and exclusion criteria, 17 studies published in 18 articles were identified as big data nursing research applied to practice. Nurses clearly are beginning to conduct big data research applied to practice. These studies represent multiple data sources and settings. Although numerous analytic methods were used, the fundamental issue remains to define the types of analyses consistent with big data analytic methods. There are needs to increase the visibility of big data and data science research conducted by nurse scientists, further examine the use of state of the science in data analytics, and continue to expand the availability and use of a variety of scientific, governmental, and industry data resources. A major implication of this literature review is whether nursing faculty and preparation of future scientists (PhD programs) are prepared for big data and data science. Copyright © 2016 Elsevier Inc. All rights reserved.

Development of a safety and regulation systems simulation program II

International Nuclear Information System (INIS)

1985-05-01

This report describes the development of a safety and regulation systems simulation program under contract to the Atomic Energy Control Board of Canada. A systems logic interaction simulation (SLISIM) program was developed for the AECB's HP-1000 computer which operates in the interactive simulation (INSIM) program environment. The SLISIM program simulates the spatial neutron dynamics, the regulation of the reactor power and in this version the CANDU-PHW 600 MW(e) computerized shutdown systems' trip parameters. The modular concept and interactive capability of the INSIM environment provides the user with considerable flexibility of the setup and control of the simulation

Nuclear criticality safety program at the University of Tennessee-Knoxville

International Nuclear Information System (INIS)

Basoglu, B.; Bentley, C.; Brewer, R.; Dunn, M.; Haught, C.; Plaster, M.; Wilkinson, A.; Dodds, H.; Elliott, E.; Waddell, W.

1993-01-01

This paper presents an overview of the nuclear criticality safety (NCS) educational program at the University of Tennessee-Knoxville. The program is an academic specialization for nuclear engineering graduate students pursuing either the MS or PhD degree and includes special NCS courses and NCS research projects. Both the courses and the research projects serve as partial fulfillment of the requirements for the degree being pursued

The Nordic nuclear safety program 1994-1997. Project handbook

International Nuclear Information System (INIS)

1997-06-01

This is a new revision of the handbook for administrators of the Nordic reactor safety program NKS. The most important administrative functions in project management are described, which should secure a uniform management approach in all the projects. The description of the organizational scheme of the NKS and distribution of responsibilities is followed by examples of various administrative routines and document forms. In the annex the names and addresses of the staff involved in administration of the NKS program are listed. (EG)

HARNESSING BIG DATA VOLUMES

Directory of Open Access Journals (Sweden)

Bogdan DINU

2014-04-01

Full Text Available Big Data can revolutionize humanity. Hidden within the huge amounts and variety of the data we are creating we may find information, facts, social insights and benchmarks that were once virtually impossible to find or were simply inexistent. Large volumes of data allow organizations to tap in real time the full potential of all the internal or external information they possess. Big data calls for quick decisions and innovative ways to assist customers and the society as a whole. Big data platforms and product portfolio will help customers harness to the full the value of big data volumes. This paper deals with technical and technological issues related to handling big data volumes in the Big Data environment.

Big bang and big crunch in matrix string theory

International Nuclear Information System (INIS)

Bedford, J.; Ward, J.; Papageorgakis, C.; Rodriguez-Gomez, D.

2007-01-01

Following the holographic description of linear dilaton null cosmologies with a big bang in terms of matrix string theory put forward by Craps, Sethi, and Verlinde, we propose an extended background describing a universe including both big bang and big crunch singularities. This belongs to a class of exact string backgrounds and is perturbative in the string coupling far away from the singularities, both of which can be resolved using matrix string theory. We provide a simple theory capable of describing the complete evolution of this closed universe

Big data a primer

CERN Document Server

Bhuyan, Prachet; Chenthati, Deepak

2015-01-01

This book is a collection of chapters written by experts on various aspects of big data. The book aims to explain what big data is and how it is stored and used. The book starts from  the fundamentals and builds up from there. It is intended to serve as a review of the state-of-the-practice in the field of big data handling. The traditional framework of relational databases can no longer provide appropriate solutions for handling big data and making it available and useful to users scattered around the globe. The study of big data covers a wide range of issues including management of heterogeneous data, big data frameworks, change management, finding patterns in data usage and evolution, data as a service, service-generated data, service management, privacy and security. All of these aspects are touched upon in this book. It also discusses big data applications in different domains. The book will prove useful to students, researchers, and practicing database and networking engineers.

An augmented audit program for assuring radiation safety during radiographic examination operations

International Nuclear Information System (INIS)

Jervey, R.A. Jr.; Papin, P.J.

1993-01-01

Auditing a gamma radiography program is required as part of the authorizing license. Checklists and cursory reviews are the typical approach to addressing program requirements. A more proactive approach is recommended. The audit program described was prepared for a specific set of operating conditions but can be applied to any given program. Improvements in the effectiveness of the radiography safety program can be made with additional examination and emphasis on direct observation of licensed activities

75 FR 5244 - Pipeline Safety: Integrity Management Program for Gas Distribution Pipelines; Correction

Science.gov (United States)

2010-02-02

... Management Program for Gas Distribution Pipelines; Correction AGENCY: Pipeline and Hazardous Materials Safety... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... Regulations to require operators of gas distribution pipelines to develop and implement integrity management...

Preliminary Performance Analysis Program Development for Safety System with Safeguard Vessel

International Nuclear Information System (INIS)

Kang, Han-Ok; Lee, Jun; Park, Cheon-Tae; Yoon, Ju-Hyeon; Park, Keun-Bae

2007-01-01

SMART is an advanced modular integral type pressurized water reactor for a seawater desalination and an electricity production. Major components of the reactor coolant system such as the pressurizer, Reactor Coolant Pump (RCP), and steam generators are located inside the reactor vessel. The SMART can fundamentally eliminate the possibility of large break loss of coolant accidents (LBLOCAs), improve the natural circulation capability, and better accommodate and thus enhance a resistance to a wide range of transients and accidents. The safety goals of the SMART are enhanced through highly reliable safety systems such as the passive residual heat removal system (PRHRS) and the safeguard vessel coupled with the passive safety injection feature. The safeguard vessel is a steel-made, leak-tight pressure vessel housing the RPV, SIT, and the associated valves and pipelines. A primary function of the safeguard vessel is to confine any radioactive release from the primary circuit within the vessel under DBAs related to loss of the integrity of the primary system. A preliminary performance analysis program for a safety system using the safeguard vessel is developed in this study. The developed program is composed of several subroutines for the reactor coolant system, passive safety injection system, safeguard vessel including the pressure suppression pool, and PRHRS. A small break loss of coolant accident at the upper part of a reactor is analyzed and the results are discussed

Microsoft big data solutions

CERN Document Server

Jorgensen, Adam; Welch, John; Clark, Dan; Price, Christopher; Mitchell, Brian

2014-01-01

Tap the power of Big Data with Microsoft technologies Big Data is here, and Microsoft's new Big Data platform is a valuable tool to help your company get the very most out of it. This timely book shows you how to use HDInsight along with HortonWorks Data Platform for Windows to store, manage, analyze, and share Big Data throughout the enterprise. Focusing primarily on Microsoft and HortonWorks technologies but also covering open source tools, Microsoft Big Data Solutions explains best practices, covers on-premises and cloud-based solutions, and features valuable case studies. Best of all,

Corporate Social Responsibility programs of Big Food in Australia: a content analysis of industry documents.

Science.gov (United States)

Richards, Zoe; Thomas, Samantha L; Randle, Melanie; Pettigrew, Simone

2015-12-01

To examine Corporate Social Responsibility (CSR) tactics by identifying the key characteristics of CSR strategies as described in the corporate documents of selected 'Big Food' companies. A mixed methods content analysis was used to analyse the information contained on Australian Big Food company websites. Data sources included company CSR reports and web-based content that related to CSR initiatives employed in Australia. A total of 256 CSR activities were identified across six organisations. Of these, the majority related to the categories of environment (30.5%), responsibility to consumers (25.0%) or community (19.5%). Big Food companies appear to be using CSR activities to: 1) build brand image through initiatives associated with the environment and responsibility to consumers; 2) target parents and children through community activities; and 3) align themselves with respected organisations and events in an effort to transfer their positive image attributes to their own brands. Results highlight the type of CSR strategies Big Food companies are employing. These findings serve as a guide to mapping and monitoring CSR as a specific form of marketing. © 2015 Public Health Association of Australia.

Summary big data

CERN Document Server

2014-01-01

This work offers a summary of Cukier the book: "Big Data: A Revolution That Will Transform How we Live, Work, and Think" by Viktor Mayer-Schonberg and Kenneth. Summary of the ideas in Viktor Mayer-Schonberg's and Kenneth Cukier's book: " Big Data " explains that big data is where we use huge quantities of data to make better predictions based on the fact we identify patters in the data rather than trying to understand the underlying causes in more detail. This summary highlights that big data will be a source of new economic value and innovation in the future. Moreover, it shows that it will

Measurement of the neutron spectrum of the Big Ten critical assembly by lithium-6 spectrometry

International Nuclear Information System (INIS)

De Leeuw-Gierts, G.; De Leeuw, S.; Hansen, G.E.; Helmick, H.H.

1979-01-01

The central neutron-flux spectrum of the Los Alamos Scientific Laboratory's critical assembly, Big Ten, was measured with a 6 Li spectrometer and techniques developed at the Centre d'Etude de L'Energie Nucleaire, Mol, as part of an experimental program to establish the characteristics of Big Ten

Measurement of the neutron spectrum of the Big Ten critical assembly by lithium-6 spectrometry

International Nuclear Information System (INIS)

Leeuw-Gierts, G. de; Leeuw, S. de

1980-01-01

The central neutron-flux spectrum of the Los Alamos Scientific Laboratory's critical assembly, Big Ten, was measured with a 6 Li spectrometer and techniques developed at the Centre d'Etude de l'Energie Nucleaire, Mol, as part of an experimental program to establish the characteristics of Big Ten

Big Data and Intelligence: Applications, Human Capital, and Education

Directory of Open Access Journals (Sweden)

Michael Landon-Murray

2016-06-01

Full Text Available The potential for big data to contribute to the US intelligence mission goes beyond bulk collection, social media and counterterrorism. Applications will speak to a range of issues of major concern to intelligence agencies, from military operations to climate change to cyber security. There are challenges too: procurement lags, data stovepiping, separating signal from noise, sources and methods, a range of normative issues, and central to managing these challenges, human capital. These potential applications and challenges are discussed and a closer look at what data scientists do in the Intelligence Community (IC is offered. Effectively filling the ranks of the IC’s data science workforce will depend on the provision of well-trained data scientists from the higher education system. Program offerings at America’s top fifty universities will thus be surveyed (just a few years ago there were reportedly no degrees in data science. One Master’s program that has melded data science with intelligence is examined as well as a university big data research center focused on security and intelligence. This discussion goes a long way to clarify the prospective uses of data science in intelligence while probing perhaps the key challenge to optimal application of big data in the IC.

Workshop on Program for Elimination of Requirements Marginal to Safety: Proceedings

International Nuclear Information System (INIS)

Dey, M.

1993-09-01

These are the proceedings of the Public Workshop on the US Nuclear Regulatory Commission's Program for Elimination of Requirements Marginal to Safety. The workshop was held at the Holiday Inn, Bethesda, on April 27 and 28, 1993. The purpose of the workshop was to provide an opportunity for public and industry input to the program. The workshop addressed the institutionalization of the program to review regulations with the purpose of eliminating those that are marginal. The objective is to avoid the dilution of safety efforts. One session was devoted to discussion of the framework for a performance-based regulatory approach. In addition, panelists and attendees discussed scope, schedules and status of specific regulatory items: containment leakage testing requirements, fire protection requirements, requirements for environmental qualification of electrical equipment, requests for information under 10CFR50.54(f), requirements for combustible gas control systems, and quality assurance requirements

Workshop on Program for Elimination of Requirements Marginal to Safety: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Dey, M. [Nuclear Regulatory Commission, Washington, DC (United States). Div. of Safety Issue Resolution; Arsenault, F.; Patterson, M.; Gaal, M. [SCIENTECH, Inc., Rockville, MD (United States)

1993-09-01

These are the proceedings of the Public Workshop on the US Nuclear Regulatory Commission`s Program for Elimination of Requirements Marginal to Safety. The workshop was held at the Holiday Inn, Bethesda, on April 27 and 28, 1993. The purpose of the workshop was to provide an opportunity for public and industry input to the program. The workshop addressed the institutionalization of the program to review regulations with the purpose of eliminating those that are marginal. The objective is to avoid the dilution of safety efforts. One session was devoted to discussion of the framework for a performance-based regulatory approach. In addition, panelists and attendees discussed scope, schedules and status of specific regulatory items: containment leakage testing requirements, fire protection requirements, requirements for environmental qualification of electrical equipment, requests for information under 10CFR50.54(f), requirements for combustible gas control systems, and quality assurance requirements.

Fusion Safety Program annual report, fiscal year 1983

International Nuclear Information System (INIS)

Crocker, J.G.; Holland, D.F.

1984-07-01

The Fusion Safety Program major activities for Fiscal Year 1983 are summarized in this report. The program was initiated in FY 1979, with the Idaho National Engineering Laboratory (INEL) designated lead laboratory, and EG and G Idaho, inc., named as prime contractor to implement this role. The report contains four sections: EG and G Idaho, Inc., activities at the INEL includes progress reports and portions of papers on the tritium implantation experiment, tritium control systems, tritium release from solid breeding blankets, plasma disruptions, risk assessment, transient code development, data base development, and a discussion of participation in the blanket comparison and selection study. The section outside contracts includes progress reports and portions of papers on lithium-lead reactions by Hanford Engineering Development Laboratory (HEDL) and the University of Wisconsin, magnet safety by the Francis Bitter Magnet Laboratory of the Massachusetts Institute of Technology (MIT) and Argonne National Laboratory (ANL), risk assessment by the University of California at Los Angeles (UCLA) and MIT, tritium retention by the University of Virginia, and effects of plasma disruptions by MIT. A list of publications and planned fiscal year 1984 activities are also included

Quarterly report on the ferrocyanide safety program for the period ending December 31, 1994

International Nuclear Information System (INIS)

Meacham, J.E.; Cash, R.J.; Dukelow, G.T.

1995-01-01

This is the fifteenth quarterly report on the progress of active addressing the Ferrocyanide Safety Issue associated with Hanford Site high-level radioactive waste tanks. Progress in the Ferrocyanide Safety Program is reviewed, including work addressing the six parts of Defense Nuclear Facilities Safety Board Recommendation 90-7 (FR 1990). All work activities are described in the revised program plan (DOE 1994b), and this report follows the same format presented there. A summary of the key events occurring this quarter is presented in Section 1.2. More detailed discussions of progress are located in Sections 2.0 through 4.0. 60 refs

Quarterly report on the Ferrocyanide Safety Program for the period ending September 30, 1995

International Nuclear Information System (INIS)

Meacham, J.E.; Cash, R.J.; Dukelow, G.T.

1995-10-01

This is the eighteenth quarterly report on the progress of activities addressing the Ferrocyanide Safety Issue associated with Hanford Site high-level radioactive waste tanks. Progress in the Ferrocyanide Safety Program is reviewed, including work addressing the six parts of Defense Nuclear Facilities Safety Board Recommendation 90-7 (FR 1990). All work activities are described in the revised program plan (DOE 1994b), and this report follows the same format presented there. A summary of the key events occurring this quarter is presented in Section 1.2. More detailed discussions of progress are located in Sections 2.0 through 4.0

Development of Safety Significance Evaluation Program for Accidents and Events in NPPs

International Nuclear Information System (INIS)

Yang, Hui Chang; Hong, Seok Jin; Cho, Nam Chul; Chung, Dae Wook; Lee, Chang Joo

2010-01-01

To evaluate the significance in terms of safety for the accidents and events occurred in nuclear power plants using probabilistic safety assessment techniques can provide useful insights to the regulator. Based on the quantified risk information of accident or event occurred, regulators can decide which regulatory areas should be focused than the others. To support these regulatory analysis activities, KINS-ASP program was developed. KINS-ASP program can supports the risk increase due to the occurred accidents or events by providing the graphic interfaces and linked quantification engines for the PSA experts and non- PSA acquainted regulators both

Bridging the Divide between Safety and Risk Management for your Project or Program

Science.gov (United States)

Lutomski, Mike

2005-01-01

This presentation will bridge the divide between these separate but overlapping disciplines and help explain how to use Risk Management as an effective management decision support tool that includes safety. Risk Management is an over arching communication tool used by management to prioritize and effectively mitigate potential problems before they concur. Risk Management encompasses every kind of potential problem that can occur on a program or project. Some of these are safety issues such as hazards that have a specific likelihood and consequence that need to be controlled and included to show an integrated picture of accepted) mitigated, and residual risk. Integrating safety and other assurance disciplines is paramount to accurately representing a program s or projects risk posture. Risk is made up of several components such as technical) cost, schedule, or supportability. Safety should also be a consideration for every risk. The safety component can also have an impact on the technical, cost, and schedule aspect of a given risk. The current formats used for communication of safety and risk issues are not consistent or integrated. The presentation will explore the history of these disciplines, current work to integrate them, and suggestions for integration for the future.

Seismic safety margin research program. Program plan, Revision II

International Nuclear Information System (INIS)

Smith, P.D.; Tokarz, F.J.; Bernreuter, D.L.; Cummings, G.E.; Chou, C.K.; Vagliente, V.N.; Johnson, J.J.; Dong, R.G.

1978-01-01

The document has been prepared pursuant to the second meeting of the Senior Research Review Group of the Seismic Safety Margin Research Program (SSMRP), which was held on June 15, 16, 1978. The major portion of the material contained in the document is descriptions of specific subtasks to be performed on the SSMRP. This is preceded by a brief discussion of the objective of the SSMRP and the approach to be used. Specific subtasks to be performed in Phase I of the SSMRP are as follows: (1) plant/site selection, (2) seismic input, (3) soil structure interaction, (4) structural building response, (5) structural sub-system response, (6) fragility, (7) system analysis, and (8) Phase II task definition

A randomized, controlled intervention of machine guarding and related safety programs in small metal-fabrication businesses.

Science.gov (United States)

Parker, David L; Brosseau, Lisa M; Samant, Yogindra; Xi, Min; Pan, Wei; Haugan, David

2009-01-01

Metal fabrication employs an estimated 3.1 million workers in the United States. The absence of machine guarding and related programs such as lockout/tagout may result in serious injury or death. The purpose of this study was to improve machine-related safety in small metal-fabrication businesses. We used a randomized trial with two groups: management only and management-employee. We evaluated businesses for the adequacy of machine guarding (machine scorecard) and related safety programs (safety audit). We provided all businesses with a report outlining deficiencies and prioritizing their remediation. In addition, the management-employee group received four one-hour interactive training sessions from a peer educator. We evaluated 40 metal-fabrication businesses at baseline and 37 (93%) one year later. Of the three nonparticipants, two had gone out of business. More than 40% of devices required for adequate guarding were missing or inadequate, and 35% of required safety programs and practices were absent at baseline. Both measures improved significantly during the course of the intervention. No significant differences in changes occurred between the two intervention groups. Machine-guarding practices and programs improved by up to 13% and safety audit scores by up to 23%. Businesses that added safety committees or those that started with the lowest baseline measures showed the greatest improvements. Simple and easy-to-use assessment tools allowed businesses to significantly improve their safety practices, and safety committees facilitated this process.

FAA National Aviation Safety Inspection Program. Annual Report FY90

Science.gov (United States)

1991-06-01

This report was undertaken to document, analyze, and place : into national perspective the findings from the 1990 National : Aviation Safety Inspection Program (NASIP). This report is the : fifth in a series of annual reports covering the results of ...

Risk Management: Earning Recognition with an Automated Safety Program

Science.gov (United States)

Lansberry, Linden; Strasburger, Tom

2012-01-01

Risk management is a huge task that requires diligent oversight to avoid penalties, fines, or lawsuits. Add in the burden of limited resources that schools face today, and the challenge of meeting the required training, reporting, compliance, and other administrative issues associated with a safety program is almost insurmountable. Despite an…

Health and safety plan for operations performed for the Environmental Restoration Program

Energy Technology Data Exchange (ETDEWEB)

Trippet, W.A. II (IT Corp., (United States)); Reneau, M.; Morton, S.L. (EG and G Idaho, Inc., Idaho Falls, ID (United States))

1992-04-01

This document constitutes the generic health and safety plan for the Environmental Restoration Program (ERP). It addresses the health and safety requirements of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA); Occupational Safety and Health Administration (OSHA) 29 CFR 1910.120 standard; and EG G Idaho, Inc. This plan is a guide to individuals who must complete a health and safety plan for a task performed for the EPR. It contains a task specific addendum that, when completed, specifically addresses task specific health and safety issues. This health and safety plan reduces the time it takes to write a task specific health and safety plan by providing discussions of requirements, guidance on where specific information is located, and specific topics in the Addendum that must be discussed at a task level. This format encourages a complete task specific health and safety plan and a standard for all health and safety plans written for ERP.

Health and safety plan for operations performed for the Environmental Restoration Program

International Nuclear Information System (INIS)

Trippet, W.A. II; Reneau, M.; Morton, S.L.

1992-04-01

This document constitutes the generic health and safety plan for the Environmental Restoration Program (ERP). It addresses the health and safety requirements of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA); Occupational Safety and Health Administration (OSHA) 29 CFR 1910.120 standard; and EG ampersand G Idaho, Inc. This plan is a guide to individuals who must complete a health and safety plan for a task performed for the EPR. It contains a task specific addendum that, when completed, specifically addresses task specific health and safety issues. This health and safety plan reduces the time it takes to write a task specific health and safety plan by providing discussions of requirements, guidance on where specific information is located, and specific topics in the Addendum that must be discussed at a task level. This format encourages a complete task specific health and safety plan and a standard for all health and safety plans written for ERP

Key Performance Indicators in the Evaluation of the Quality of Radiation Safety Programs.

Science.gov (United States)

Schultz, Cheryl Culver; Shaffer, Sheila; Fink-Bennett, Darlene; Winokur, Kay

2016-08-01

Beaumont is a multiple hospital health care system with a centralized radiation safety department. The health system operates under a broad scope Nuclear Regulatory Commission license but also maintains several other limited use NRC licenses in off-site facilities and clinics. The hospital-based program is expansive including diagnostic radiology and nuclear medicine (molecular imaging), interventional radiology, a comprehensive cardiovascular program, multiple forms of radiation therapy (low dose rate brachytherapy, high dose rate brachytherapy, external beam radiotherapy, and gamma knife), and the Research Institute (including basic bench top, human and animal). Each year, in the annual report, data is analyzed and then tracked and trended. While any summary report will, by nature, include items such as the number of pieces of equipment, inspections performed, staff monitored and educated and other similar parameters, not all include an objective review of the quality and effectiveness of the program. Through objective numerical data Beaumont adopted seven key performance indicators. The assertion made is that key performance indicators can be used to establish benchmarks for evaluation and comparison of the effectiveness and quality of radiation safety programs. Based on over a decade of data collection, and adoption of key performance indicators, this paper demonstrates one way to establish objective benchmarking for radiation safety programs in the health care environment.

Collaborative Approaches Needed to Close the Big Data Skills Gap

Directory of Open Access Journals (Sweden)

Steven Miller

2014-04-01

Full Text Available The big data and analytics talent discussion has largely focused on a single role – the data scientist. However, the need is much broader than data scientists. Data has become a strategic business asset. Every professional occupation must adapt to this new mindset. Universities in partnership with industry must move quickly to ensure that the graduates they produce have the required skills for the age of big data. Existing curricula should be reviewed and adapted to ensure relevance. New curricula and degree programs are needed to meet the needs of industry.

Nuclear Data Activities in Support of the DOE Nuclear Criticality Safety Program

International Nuclear Information System (INIS)

Westfall, R.M.; McKnight, R.D.

2005-01-01

The DOE Nuclear Criticality Safety Program (NCSP) provides the technical infrastructure maintenance for those technologies applied in the evaluation and performance of safe fissionable-material operations in the DOE complex. These technologies include an Analytical Methods element for neutron transport as well as the development of sensitivity/uncertainty methods, the performance of Critical Experiments, evaluation and qualification of experiments as Benchmarks, and a comprehensive Nuclear Data program coordinated by the NCSP Nuclear Data Advisory Group (NDAG).The NDAG gathers and evaluates differential and integral nuclear data, identifies deficiencies, and recommends priorities on meeting DOE criticality safety needs to the NCSP Criticality Safety Support Group (CSSG). Then the NDAG identifies the required resources and unique capabilities for meeting these needs, not only for performing measurements but also for data evaluation with nuclear model codes as well as for data processing for criticality safety applications. The NDAG coordinates effort with the leadership of the National Nuclear Data Center, the Cross Section Evaluation Working Group (CSEWG), and the Working Party on International Evaluation Cooperation (WPEC) of the OECD/NEA Nuclear Science Committee. The overall objective is to expedite the issuance of new data and methods to the DOE criticality safety user. This paper describes these activities in detail, with examples based upon special studies being performed in support of criticality safety for a variety of DOE operations

Radiation safety program in high dose rate brachytherapy facility at INHS Asvini

Directory of Open Access Journals (Sweden)

Kirti Tyagi

2014-01-01

Full Text Available Brachytherapy concerns primarily the use of radioactive sealed sources which are inserted into catheters or applicators and placed directly into tissue either inside or very close to the target volume. The use of radiation in treatment of patients involves both benefits and risks. It has been reported that early radiation workers had developed radiation induced cancers. These incidents lead to continuous work for the improvement of radiation safety of patients and personnel The use of remote afterloading equipment has been developed to improve radiation safety in the delivery of treatment in brachytherapy. The widespread adoption of high dose rate brachytherapy needs appropriate quality assurance measures to minimize the risks to both patients and medical staff. The radiation safety program covers five major aspects: quality control, quality assurance, radiation monitoring, preventive maintenance, administrative measures and quality audit. This paper will discuss the radiation safety program developedfor a high dose rate brachytherapy facility at our centre which may serve as a guideline for other centres intending to install a similar facility.

Guidance for implementing an environmental, safety and health assurance program. Volume 2. A model plan for environmental, safety and health staff audits and appraisals

International Nuclear Information System (INIS)

Ellingson, A.C.

1980-09-01

This is 1 of 15 documents designed to illustrate how an Environmental, Safety and Health (ES and H) Assurance Program may be implemented. The generic definition of ES and H Assurance Programs is given in a companion document entitled An Environmental, Safety and Health Assurance Program Standard. This document is concerned with ES and H audit and appraisal activities of an ES and H Staff Organization as they might be performed in an institution whose ES and H program is based upon the ES and H Assurance Program Standard. An annotated model plan for ES and H Staff audits and appraisals is presented and discussed

Comparing Occupational Health and Safety Management System Programming with Injury Rates in Poultry Production.

Science.gov (United States)

Autenrieth, Daniel A; Brazile, William J; Douphrate, David I; Román-Muñiz, Ivette N; Reynolds, Stephen J

2016-01-01

Effective methods to reduce work-related injuries and illnesses in animal production agriculture are sorely needed. One approach that may be helpful for agriculture producers is the adoption of occupational health and safety management systems. In this replication study, the authors compared the injury rates on 32 poultry growing operations with the level of occupational health and safety management system programming at each farm. Overall correlations between injury rates and programming level were determined, as were correlations between individual management system subcomponents to ascertain which parts might be the most useful for poultry producers. It was found that, in general, higher levels of occupational health and safety management system programming were associated with lower rates of workplace injuries and illnesses, and that Management Leadership was the system subcomponent with the strongest correlation. The strength and significance of the observed associations were greater on poultry farms with more complete management system assessments. These findings are similar to those from a previous study of the dairy production industry, suggesting that occupational health and safety management systems may hold promise as a comprehensive way for producers to improve occupational health and safety performance. Further research is needed to determine the effectiveness of such systems to reduce farm work injuries and illnesses. These results are timely given the increasing focus on occupational safety and health management systems.

Critical experiments facility and criticality safety programs at JAERI

International Nuclear Information System (INIS)

Kobayashi, Iwao; Tachimori, Shoichi; Takeshita, Isao; Suzaki, Takenori; Miyoshi, Yoshinori; Nomura, Yasushi

1985-10-01

The nuclear criticality safety is becoming a key point in Japan in the safety considerations for nuclear installations outside reactors such as spent fuel reprocessing facilities, plutonium fuel fabrication facilities, large scale hot alboratories, and so on. Especially a large scale spent fuel reprocessing facility is being designed and would be constructed in near future, therefore extensive experimental studies are needed for compilation of our own technical standards and also for verification of safety in a potential criticality accident to obtain public acceptance. Japan Atomic Energy Research Institute is proceeding a construction program of a new criticality safety experimental facility where criticality data can be obtained for such solution fuels as mainly handled in a reprocessing facility and also chemical process experiments can be performed to investigate abnormal phenomena, e.g. plutonium behavior in solvent extraction process by using pulsed colums. In FY 1985 detail design of the facility will be completed and licensing review by the government would start in FY 1986. Experiments would start in FY 1990. Research subjects and main specifications of the facility are described. (author)

Sun Safety at Work Canada: a multiple case-study protocol to develop sun safety and heat protection programs and policies for outdoor workers.

Science.gov (United States)

Kramer, Desre M; Tenkate, Thomas; Strahlendorf, Peter; Kushner, Rivka; Gardner, Audrey; Holness, D Linn

2015-07-10

CAREX Canada has identified solar ultraviolet radiation (UV) as the second most prominent carcinogenic exposure in Canada, and over 75 % of Canadian outdoor workers fall within the highest exposure category. Heat stress also presents an important public health issue, particularly for outdoor workers. The most serious form of heat stress is heat stroke, which can cause irreversible damage to the heart, lungs, kidneys, and liver. Although the need for sun and heat protection has been identified, there is no Canada-wide heat and sun safety program for outdoor workers. Further, no prevention programs have addressed both skin cancer prevention and heat stress in an integrated approach. The aim of this partnered study is to evaluate whether a multi-implementation, multi-evaluation approach can help develop sustainable workplace-specific programs, policies, and procedures to increase the use of UV safety and heat protection. This 2-year study is a theory-driven, multi-site, non-randomized study design with a cross-case analysis of 13 workplaces across four provinces in Canada. The first phase of the study includes the development of workplace-specific programs with the support of the intensive engagement of knowledge brokers. There will be a three-points-in-time evaluation with process and impact components involving the occupational health and safety (OHS) director, management, and workers with the goal of measuring changes in workplace policies, procedures, and practices. It will use mixed methods involving semi-structured key informant interviews, focus groups, surveys, site observations, and UV dosimetry assessment. Using the findings from phase I, in phase 2, a web-based, interactive, intervention planning tool for workplaces will be developed, as will the intensive engagement of intermediaries such as industry decision-makers to link to policymakers about the importance of heat and sun safety for outdoor workers. Solar UV and heat are both health and safety hazards

Reliability and safety program plan outline for the operational phase of a waste isolation facility

International Nuclear Information System (INIS)

Ammer, H.G.; Wood, D.E.

1977-01-01

A Reliability and Safety Program plan outline has been prepared for the operational phase of a Waste Isolation Facility. The program includes major functions of risk assessment, technical support activities, quality assurance, operational safety, configuration monitoring, reliability analysis and support and coordination meetings. Detailed activity or task descriptions are included for each function. Activities are time-phased and presented in the PERT format for scheduling and interactions. Task descriptions include manloading, travel, and computer time estimates to provide data for future costing. The program outlined here will be used to provide guidance from a reliability and safety standpoint to design, procurement, construction, and operation of repositories for nuclear waste. These repositories are to be constructed under the National Waste Terminal Storage program under the direction of the Office of Waste Isolation, Union Carbide Corp. Nuclear Division

The Pennsylvania certified safety committee program: an evaluation of participation and effects on work injury rates.

Science.gov (United States)

Liu, Hangsheng; Burns, Rachel M; Schaefer, Agnes G; Ruder, Teague; Nelson, Christopher; Haviland, Amelia M; Gray, Wayne B; Mendeloff, John

2010-08-01

Since 1994, Pennsylvania, like several other states, has provided a 5% discount on workers' compensation insurance premiums for firms with a certified joint labor management safety committee. This study explored the factors affecting program participation and evaluated the effect of this program on work injuries. Using Pennsylvania unemployment insurance data (1996-2006), workers' compensation data (1998-2005), and the safety committee audit data (1999-2007), we conducted propensity score matching and regression analysis on the program's impact on injury rates. Larger firms, firms with higher injury rates, firms in high risk industries, and firms without labor unions were more likely to join the safety committee program and less likely to drop out of the program. The injury rates of participants did not decline more than the rates for non-participants; however, rates at participant firms with good compliance dropped more than the rates at participant firms with poor compliance. Firm size and prior injury rates are key predictors of program participation. Firms that complied with the requirement to train their safety committee members did experience reductions in injuries, but non-compliance with that and other requirements was so widespread that no overall impact of the program could be detected. Copyright 2010 Wiley-Liss, Inc.

Big Data en surveillance, deel 1 : Definities en discussies omtrent Big Data

NARCIS (Netherlands)

Timan, Tjerk

2016-01-01

Naar aanleiding van een (vrij kort) college over surveillance en Big Data, werd me gevraagd iets dieper in te gaan op het thema, definities en verschillende vraagstukken die te maken hebben met big data. In dit eerste deel zal ik proberen e.e.a. uiteen te zetten betreft Big Data theorie en

Characterizing Big Data Management

OpenAIRE

Rogério Rossi; Kechi Hirama

2015-01-01

Big data management is a reality for an increasing number of organizations in many areas and represents a set of challenges involving big data modeling, storage and retrieval, analysis and visualization. However, technological resources, people and processes are crucial to facilitate the management of big data in any kind of organization, allowing information and knowledge from a large volume of data to support decision-making. Big data management can be supported by these three dimensions: t...

ORNL Nuclear Safety Research and Development Program Bimonthly Report for July-August 1968

Energy Technology Data Exchange (ETDEWEB)

Cottrell, W.B.

2001-08-17

The accomplishments during the months of July and August in the research and development program under way at ORNL as part of the U.S. Atomic Energy Commission's Nuclear Safety Program are summarized, Included in this report are work on various chemical reactions, as well as the release, characterization, and transport of fission products in containment systems under various accident conditions and on problems associated with the removal of these fission products from gas streams. Although most of this work is in general support of water-cooled power reactor technology, including LOFT and CSE programs, the work reflects the current safety problems, such as measurements of the prompt fuel element failure phenomena and the efficacy of containment spray and pool-suppression systems for fission-product removal. Several projects are also conducted in support of the high-temperature gas-cooled reactor (HTGR). Other major projects include fuel-transport safety investigations, a series of discussion papers on various aspects of water-reactor technology, antiseismic design of nuclear facilities, and studies of primary piping and steel, pressure-vessel technology. Experimental work relative to pressure-vessel technology includes investigations of the attachment of nozzles to shells and the implementation of joint AEX-PVFX programs on heavy-section steel technology and nuclear piping, pumps, and valves. Several of the projects are directly related to another major undertaking; namely, the AEC's standards program, which entails development of engineering safeguards and the establishment of codes and standards for government-owned or -sponsored reactor facilities. Another task, CHORD-S, is concerned with the establishment of computer programs for the evaluation of reactor design data, The recent activities of the NSIC and the Nuclear Safety journal in behalf of the nuclear community are also discussed.

Safety approach and R and D program for future french sodium-cooled fast reactors

International Nuclear Information System (INIS)

Beils, Stephane; Carluec, Bernard; Devictor, Nicolas; Fiorini, Gian Luigi; Sauvage, Jean Francois

2011-01-01

This paper presents briefly the safety approach as well as the R and D program that is underway to support the deployment of future French Sodium-Cooled fast Reactors (SFRs): A) Safety objectives and principles for future reactors. The content of the first section reflects the works of AREVA, CEA, and EDF concerning the safety orientations for the future reactors. The availability of such orientations and requirements for the SFRs has to allow introducing and managing the process that will lead to the detailed definition of the safety approach, to the selection of the corresponding safety options, and to the identification and motivation of the supporting R and D. B) Strategy and roadmap in support of the R and D for future SFRs. This section describes the R and D program led jointly by CEA, EDF, and AREVA, which has been developed with the objectives to be able to preliminarily define, by 2012, the safety orientations for the future SFRs, and to deduce from them the characteristics of the ASTRID prototype. (author)

United States program for the safety assessment of geologic disposal of commercial radioactive wastes

International Nuclear Information System (INIS)

Claiborne, H.C.

1977-01-01

The safe disposal of commercial radioactive wastes in deep geologic formations is the goal of the National Waste Terminal Storage (NWTS) Program. A comprehensive safety assessment program has been established which will proceed on a schedule consistent with the start-up of two waste repositories in late 1985. Safety assessment begins with selection of a disposal site; that is, all geologic and hydrologic factors must indicate long-term stability of the formation and prospective isolation of wastes from circulating around waters for hundreds of thousands of years. The long-term stability of each site must be demonstrated by sophisticated rock mechanics analyses. To help provide answers on the mechanism and consequences of an unlikely breach in the integrity of the repository, a Waste Isolation Safety Assessment Program (WISAP) is being sponsored at the Battelle Pacific Northwest Laboratories. Methods and data necessary to characterize the safety of generic geological waste disposal concepts, which are to be applied in the assessment of specific sties, will be developed. Other long-term safety-related studies that complement WISAP are in progress, for example, borehole plugging, salt dissolutioning, and salt transport in vertical boreholes. Requirements for licensing are in the process of being formulated by the NRC

FMCSA safety program effectiveness measurement : roadside intervention effectiveness model FY 2013 : analysis brief.

Science.gov (United States)

2017-08-01

The Roadside Inspection and Traffic Enforcement programs are two of FMCSAs most powerful safety tools. By continually examining the results of these programs, FMCSA can ensure that they are being executed effectively and are producing the desired ...

Big Data in der Cloud

DEFF Research Database (Denmark)

Leimbach, Timo; Bachlechner, Daniel

2014-01-01

Technology assessment of big data, in particular cloud based big data services, for the Office for Technology Assessment at the German federal parliament (Bundestag)......Technology assessment of big data, in particular cloud based big data services, for the Office for Technology Assessment at the German federal parliament (Bundestag)...

Big Data is invading big places as CERN

CERN Multimedia

CERN. Geneva

2017-01-01

Big Data technologies are becoming more popular with the constant grow of data generation in different fields such as social networks, internet of things and laboratories like CERN. How is CERN making use of such technologies? How machine learning is applied at CERN with Big Data technologies? How much data we move and how it is analyzed? All these questions will be answered during the talk.

The big bang

International Nuclear Information System (INIS)

Chown, Marcus.

1987-01-01

The paper concerns the 'Big Bang' theory of the creation of the Universe 15 thousand million years ago, and traces events which physicists predict occurred soon after the creation. Unified theory of the moment of creation, evidence of an expanding Universe, the X-boson -the particle produced very soon after the big bang and which vanished from the Universe one-hundredth of a second after the big bang, and the fate of the Universe, are all discussed. (U.K.)

Radiologic safety program for ionizing radiation facilities in Parana, Brazil

International Nuclear Information System (INIS)

Schmidt, M.F.S.; Tilly Junior, J.G.

1997-01-01

A radiologic safety program for inspection, licensing and control of the use of ionizing radiation in medical, industrial and research facilities in Parana, Brazil is presented. The program includes stages such as: 1- division into implementation phases considering the activity development for each area; 2-use of the existing structure to implement and to improve services. The development of the program will permit to evaluate the improvement reached and to correct operational strategic. As a result, a quality enhancement at the services performed, a reduction for radiation dose exposure and a faster response for emergency situations will be expected

Introducing Public Libraries to The Big Read: Final Report on the Audio Guide Distribution

Science.gov (United States)

Sloan, Kay; Randall, Michelle

2009-01-01

In July 2008, over 14,000 public libraries throughout the U.S. received, free of charge, a set of fourteen Audio Guides introducing them to The Big Read. Since 2007, when the National Endowment for the Arts and the Institute of Museum and Library Services, in partnership with Arts Midwest, debuted The Big Read, the program has awarded grants to…

Big Bear Exploration Ltd. 1998 annual report

International Nuclear Information System (INIS)

1999-01-01

During the first quarter of 1998 Big Bear completed a purchase of additional assets in the Rainbow Lake area of Alberta in which light oil purchase was financed with new equity and bank debt. The business plan was to immediately exploit these light oil assets, the result of which would be increased reserves, production and cash flow. Although drilling results in the first quarter on the Rainbow Lake properties was mixed, oil prices started to free fall and drilling costs were much higher than expected. As a result, the company completed a reduced program which resulted in less incremental loss and cash flow than it budgeted for. On April 29, 1998, Big Bear entered into agreement with Belco Oil and Gas Corp. and Moan Investments Ltd. for the issuance of convertible preferred shares at a gross value of $15,750,000, which shares were eventually converted at 70 cents per share to common equity. As a result of the continued plunge in oil prices, the lending value of the company's assets continued to fall, requiring it to take action in order to meet its financial commitments. Late in the third quarter Big Bear issued equity for proceeds of $11,032,000 which further reduced the company's debt. Although the company has been extremely active in identifying and pursuing acquisition opportunities, it became evident that Belco Oil and Gas Corp. and Big Bear did nor share common criteria for acquisitions, which resulted in the restructuring of their relationship in the fourth quarter. With the future of oil prices in question, Big Bear decided that it would change its focus to that of natural gas and would refocus ts efforts to acquire natural gas assets to fuel its growth. The purchase of Blue Range put Big Bear in a difficult position in terms of the latter's growth. In summary, what started as a difficult year ended in disappointment

Small Big Data Congress 2017

NARCIS (Netherlands)

Doorn, J.

2017-01-01

TNO, in collaboration with the Big Data Value Center, presents the fourth Small Big Data Congress! Our congress aims at providing an overview of practical and innovative applications based on big data. Do you want to know what is happening in applied research with big data? And what can already be

Big data opportunities and challenges

CERN Document Server

2014-01-01

This ebook aims to give practical guidance for all those who want to understand big data better and learn how to make the most of it. Topics range from big data analysis, mobile big data and managing unstructured data to technologies, governance and intellectual property and security issues surrounding big data.

Insights from the U.S. department of Energy plant safety evaluation program of VVER and RBMK reactors

International Nuclear Information System (INIS)

Petri, M.C.; Binder, J.L.; Pasedag, W.F.

2001-01-01

Throughout the years 1990 the U.S. Department of Energy has worked build capability in countries of the former Soviet Union to assess the safety of their VVER and RBMK reactors. Through this Plant Safety Evaluation Program, deterministic and probabilistic analyses have been used to provide a documented plant risk profile to support safe plant operation and to set priorities for safety upgrades. Work has been sponsored at thirteen nuclear power plant sites in eight countries. The Plant Safety Evaluation Program has resulted in immediate and long-term safety benefits for the Soviet-designed nuclear plants. (author)

Reactor dosimetry calibrations in the Big Ten critical assembly

International Nuclear Information System (INIS)

Barr, D.W.; Hansen, G.E.

1977-01-01

Eleven irradiations of foil packs located in the central region of Big Ten were made for the Interlaboratory Reaction Rate Program. Each irradiation was at a nominal 10 15 fluence and the principal fluence monitor was the National Bureau of Standards' double fission chamber containing 235 U and 238 U deposits and located at the center of Big Ten. Secondary monitors consisted of three external fission chambers and two internal foil sets containing Au, In, and Al. Activities of one set were counted at the LASL and the other at the Hanford Engineering Developement Laboratory. The uncertainty in relative fluence for each irradiation was +-0.3%

Big Data and Neuroimaging.

Science.gov (United States)

Webb-Vargas, Yenny; Chen, Shaojie; Fisher, Aaron; Mejia, Amanda; Xu, Yuting; Crainiceanu, Ciprian; Caffo, Brian; Lindquist, Martin A

2017-12-01

Big Data are of increasing importance in a variety of areas, especially in the biosciences. There is an emerging critical need for Big Data tools and methods, because of the potential impact of advancements in these areas. Importantly, statisticians and statistical thinking have a major role to play in creating meaningful progress in this arena. We would like to emphasize this point in this special issue, as it highlights both the dramatic need for statistical input for Big Data analysis and for a greater number of statisticians working on Big Data problems. We use the field of statistical neuroimaging to demonstrate these points. As such, this paper covers several applications and novel methodological developments of Big Data tools applied to neuroimaging data.

Assessment of Native Languages for Food Safety Training Programs for Meat Industry Employees

Science.gov (United States)

Olsen, Sherrlyn S.; Cordray, Joseph C.; Sapp, Stephen; Sebranek, Joseph G.; Anderson, Barbara; Wenger, Matt

2012-01-01

Challenges arise when teaching food safety to culturally diverse employees working in meatpacking and food manufacturing industries. A food safety training program was developed in English, translated into Spanish, and administered to 1,265 adult learners. Assessments were conducted by comparing scores before and immediately following training.…

Big Data; A Management Revolution : The emerging role of big data in businesses

OpenAIRE

Blasiak, Kevin

2014-01-01

Big data is a term that was coined in 2012 and has since then emerged to one of the top trends in business and technology. Big data is an agglomeration of different technologies resulting in data processing capabilities that have been unreached before. Big data is generally characterized by 4 factors. Volume, velocity and variety. These three factors distinct it from the traditional data use. The possibilities to utilize this technology are vast. Big data technology has touch points in differ...

Implementing the Comprehensive Unit-Based Safety Program (CUSP) to Improve Patient Safety in an Academic Primary Care Practice.

Science.gov (United States)

Pitts, Samantha I; Maruthur, Nisa M; Luu, Ngoc-Phuong; Curreri, Kimberly; Grimes, Renee; Nigrin, Candace; Sateia, Heather F; Sawyer, Melinda D; Pronovost, Peter J; Clark, Jeanne M; Peairs, Kimberly S

2017-11-01

While there is growing awareness of the risk of harm in ambulatory health care, most patient safety efforts have focused on the inpatient setting. The Comprehensive Unit-based Safety Program (CUSP) has been an integral part of highly successful safety efforts in inpatient settings. In 2014 CUSP was implemented in an academic primary care practice. As part of CUSP implementation, staff and clinicians underwent training on the science of safety and completed a two-question safety assessment survey to identify safety concerns in the practice. The concerns identified by team members were used to select two initial safety priorities. The impact of CUSP on safety climate and teamwork was assessed through a pre-post comparison of results on the validated Safety Attitudes Questionnaire. Ninety-six percent of staff completed science of safety training as part of CUSP implementation, and 100% of staff completed the two-question safety assessment. The most frequently identified safety concerns were related to medications (n = 11, 28.2), diagnostic testing (n = 9, 25), and communication (n = 5, 14). The CUSP team initially prioritized communication and infection control, which led to standardization of work flows within the practice. Six months following CUSP implementation, large but nonstatistically significant increases were found for the percentage of survey respondents who reported knowledge of the proper channels for questions about patient safety, felt encouraged to report safety concerns, and believed that the work setting made it easy to learn from the errors of others. CUSP is a promising tool to improve safety climate and to identify and address safety concerns within ambulatory health care. Copyright © 2017 The Joint Commission. Published by Elsevier Inc. All rights reserved.