Regulatory supervision of safety indicators; experience with radiation safety indicators in Dukovany nuclear power plant performance

International Nuclear Information System (INIS)

Urbancik, L.; Kulich, V.

2004-01-01

The State Office for Nuclear Safety uses three sets of indicators describing the following aspects of a favourable nuclear power plant operation: smooth operation in normal circumstances, low risk to the population, and operation with a positive safety attitude. These are three safety-related areas for assessment. Each area has its own set of indicators. Overall operational safety performance indicators were identified for each attribute. From this point, a level of strategic indicators was developed, and finally, a set of specific indicators was set up. While neither the overall indicators nor the strategic indicators are directly measurable, the specific indicators are directly measurable and are targeted during inspection. (author)

Metrics derived from fish assemblages as indicators of environmental degradation in Cerrado streams

Directory of Open Access Journals (Sweden)

Milton P. Ávila

2018-04-01

Full Text Available ABSTRACT The development of effective monitoring tools depends on finding sensitive metrics that are capable of detecting the most important environmental impacts at a given region. We assessed if metrics derived from stream fish assemblages reflect physical habitat degradation and changes in land cover. We sampled the ichthyofauna and environmental characteristics of 16 stream sites of first and second order in the Upper Tocantins River basin. The streams were classified according to their environmental characteristics into reference (n = 5, intermediate (n = 4, and impacted (n = 7. A total of 4,079 individuals in five orders, 12 families, and 30 species were collected. Of the 20 metrics tested, eight were non-collinear and were tested for their performance in discriminating among groups of streams. Three metrics were sensitive to the gradient of degradation: Berger-Parker dominance index, percentage of characiform fish, and percentage of rheophilic individuals. Some commonly used metrics did not reflect the disturbances and many others were redundant with those that did. These results indicate that the metrics derived from fish assemblages may be informative for identifying the conservation status of streams, with the potential to be used in biomonitoring.

Beyond metrics? Utilizing ‘soft intelligence’ for healthcare quality and safety

OpenAIRE

Martin, Graham P.; McKee, Lorna; Dixon-Woods, Mary

2015-01-01

Formal metrics for monitoring the quality and safety of healthcare have a valuable role, but may not, by themselves, yield full insight into the range of fallibilities in organizations. ‘Soft intelligence’ is usefully understood as the processes and behaviours associated with seeking and interpreting soft data—of the kind that evade easy capture, straightforward classification and simple quantification—to produce forms of knowledge that can provide the basis for intervention. With the aim of ...

Development of safety performance indicators for HANARO

International Nuclear Information System (INIS)

Wu, Jong-Sup; Jung, Hoan-Sung; Ahn, Guk-Hoon; Lee, Kye-Hong; Lim, In-Cheol

2007-01-01

The nuclear facilities need an extensive basis for ensuring their safety. An operating organization should conduct its operation and utilization important to the safety in accordance with approved procedures and regulations. The general aims of a management system for nuclear facilities are to improve the safety performance through a planning, control and supervision of safety related activities and to foster a strong safety culture. The effectiveness of a management system can be monitored and measured to confirm the ability of its processes to achieve the intended safety performance by an assessment of the operational performance. The Operational Safety Performance Indicators, also known as SPI, help an organization define and measure a progress with regard to safety activity goals. The elements of a SPI are quantifiable measurements that reflect the critical success factors of an organizational safety. Since 1995, efforts have been directed towards the elaboration of a framework for the establishment of an operational safety performance indicator program in nuclear power plants (NPP). IAEA-TECDOC-1141, 'Operational safety performance indicators for NPP' attempted to provide a frame work for an identification of performance indicators which have a relationship to the desired safety attributes, and therefore, to a safe plant operation. Three key attributes of a smooth operation, an operation with a low risk, and an operation with a positive safety attitude, were recommended, which are associated with a safe operation. Because these attributes cannot be directly measured, an indicator structure is expanded further until a level of easily quantifiable or directly measurable indicators is identified. The intention of this approach is to use quantitative information provided by the specific indicators and to analyze performance trends relative to established goals. The safety activities in HANARO have been continuously conducted to enhance its safe operation. HANARO

Indicators to monitor NPP operational safety performance

International Nuclear Information System (INIS)

Gomez-Cobo, Ana

2002-01-01

Since December 1995 the IAEA activities on safety performance indicators focused on the elaboration of a framework for the establishment of an operational safety performance indicator programme. The development of this framework began with the consideration of the concept of NPP operational safety performance and the identification of operational safety attributes. For each operational safety attribute, overall indicators, envisioned as providing an overall evaluation of relevant aspects of safety performance, were established. Associated with each overall indicator is a level of strategic indicators intended to provide a bridge from overall to specific indicators. Finally each strategic indicator was supported by a set of specific indicators, which represent quantifiable measures of performance. The programme development was enhanced by pilot plant studies, conducted over a 15 month period from January 1998 to March 1999. The result of all this work is compiled in the IAEA-TECDOC-1141, to be published shortly. This paper presents a summary of this IAEA TECDOC. It describes the operational safety performance indicator framework proposed and discusses the results of and lessons learned from the pilot studies. Despite the efforts described, it is clear that additional research is still necessary in areas such as plant-specific adaptation of proposed frameworks in order to suit individual data collection systems and plant characteristics, indicator selection, indicator definition, goal setting, action thresholds, analysis of trends, indicator display systems, analysis of overall safety performance (i.e., aggregation or combination of indicators), safety culture indicators, qualitative indicators, and use of additional indicators to address issues such as industrial safety attitude and performance, staff welfare, and environmental compliance. This is the rationale for a new IAEA Coordinated Research Project on 'Development and application of indicators to monitor NPP

Selecting landscape metrics as indicators of spatial heterogeneity-A comparison among Greek landscapes

Science.gov (United States)

Plexida, Sofia G.; Sfougaris, Athanassios I.; Ispikoudis, Ioannis P.; Papanastasis, Vasilios P.

2014-02-01

This paper investigates the spatial heterogeneity of three landscapes along an altitudinal gradient and different human land use. The main aim was the identification of appropriate landscape indicators using different extents. ASTER image was used to create a land cover map consisting of three landscapes which differed in altitude and land use. A number of landscape metrics quantifying patch complexity, configuration, diversity and connectivity were derived from the thematic map at the landscape level. There were significant differences among the three landscapes regarding these four aspects of landscape heterogeneity. The analysis revealed a specific pattern of land use where lowlands are being increasingly utilized by humans (percentage of agricultural land = 65.84%) characterized by physical connectedness (high values of Patch Cohesion Index) and relatively simple geometries (low values of fractal dimension index). The landscape pattern of uplands was found to be highly diverse based upon the Shannon Diversity index. After selecting the scale (600 ha) where metrics values stabilized, it was shown that metrics were more correlated at the small scale of 60 ha. From the original 24 metrics, 14 individual metrics with high Spearman correlation coefficient and Variance Inflation Factor criterion were eliminated, leaving 10 representative metrics for subsequent analysis. Data reduction analysis showed that Patch Density, Area-Weighted Mean Fractal Dimension Index and Patch Cohesion Index are suitable to describe landscape patterns irrespective of the scale. A systematic screening of these metrics could enhance a deeper understanding of the results obtained by them and contribute to a sustainable landscape management of Mediterranean landscapes.

The challenge of defining risk-based metrics to improve food safety: inputs from the BASELINE project.

Science.gov (United States)

Manfreda, Gerardo; De Cesare, Alessandra

2014-08-01

In 2002, the Regulation (EC) 178 of the European Parliament and of the Council states that, in order to achieve the general objective of a high level of protection of human health and life, food law shall be based on risk analysis. However, the Commission Regulation No 2073/2005 on microbiological criteria for foodstuffs requires that food business operators ensure that foodstuffs comply with the relevant microbiological criteria. Such criteria define the acceptability of a product, a batch of foodstuffs or a process, based on the absence, presence or number of micro-organisms, and/or on the quantity of their toxins/metabolites, per unit(s) of mass, volume, area or batch. The same Regulation describes a food safety criterion as a mean to define the acceptability of a product or a batch of foodstuff applicable to products placed on the market; moreover, it states a process hygiene criterion as a mean indicating the acceptable functioning of the production process. Both food safety criteria and process hygiene criteria are not based on risk analysis. On the contrary, the metrics formulated by the Codex Alimentarius Commission in 2004, named Food Safety Objective (FSO) and Performance Objective (PO), are risk-based and fit the indications of Regulation 178/2002. The main aims of this review are to illustrate the key differences between microbiological criteria and the risk-based metrics defined by the Codex Alimentarius Commission and to explore the opportunity and also the possibility to implement future European Regulations including PO and FSO as supporting parameters to microbiological criteria. This review clarifies also the implications of defining an appropriate level of human protection, how to establish FSO and PO and how to implement them in practice linked to each other through quantitative risk assessment models. The contents of this review should clarify the context for application of the results collected during the EU funded project named BASELINE (www

Safety performance indicators. Topical issues paper no. 5

International Nuclear Information System (INIS)

Dahlgren, K.; Lederman, L.; Szikszai, T.; Palomo, J.

2001-01-01

Since its creation the nuclear industry has been struggling with the question of how safe is safe enough. Safety is a common goal to all involved in the design, operation and regulation of a nuclear installation. As a concept safety is not easy to define. However, there is a general understanding of what attributes a nuclear power plant should have in order to operate safely. The challenge lies in measuring the attributes. The new competitive open electricity market, in many countries throughout the world, is increasing the economic pressure on operators to lower operating costs without jeopardizing safety. Challenges are occurring at a rate that is unprecedented in the nuclear industry: competitiveness; downsizing; ageing; policy changes; reorganization; restructuring; mergers; globalization; and takeovers demand increasing attention to the management of safety. There are various means to measure safety performance, some of which are more qualitative in nature and others which through quantitative measures provide the means by which to evaluate performance trends with clear ties to safety. According to their use, indicators are generally considered in two groups: leading or proactive and lagging or reactive indicators. Leading indicators are most useful as a precursor to safety degradation for early management reaction. Lagging indicators are most commonly used to drive plant performance, to monitor and for benchmarking against similar plants. The actual values of the indicators are not intended to be direct measures of safety, although safety performance can be inferred from the results achieved. Each plant needs to determine which indicators best serve its needs. Selected indicators should not be static, but should be adapted to the conditions and performance of the plant, considering the cost-benefit of maintaining each individual indicator. It should be recognized that while indicators provide valuable information in the effective management of plant safety

Safety culture management and quantitative indicator evaluation

International Nuclear Information System (INIS)

Mandula, J.

2002-01-01

This report discuses a relationship between safety culture and evaluation of quantitative indicators. It shows how a systematic use of generally shared operational safety indicators may contribute to formation and reinforcement of safety culture characteristics in routine plant operation. The report also briefly describes the system of operational safety indicators used at the Dukovany plant. It is a PC database application enabling an effective work with the indicators and providing all users with an efficient tool for making synoptic overviews of indicator values in their links and hierarchical structure. Using color coding, the system allows quick indicator evaluation against predefined limits considering indicator value trends. The system, which has resulted from several-year development, was completely established at the plant during the years 2001 and 2002. (author)

A systems approach to risk management through leading safety indicators

International Nuclear Information System (INIS)

Leveson, Nancy

2015-01-01

The goal of leading indicators for safety is to identify the potential for an accident before it occurs. Past efforts have focused on identifying general leading indicators, such as maintenance backlog, that apply widely in an industry or even across industries. Other recommendations produce more system-specific leading indicators, but start from system hazard analysis and thus are limited by the causes considered by the traditional hazard analysis techniques. Most rely on quantitative metrics, often based on probabilistic risk assessments. This paper describes a new and different approach to identifying system-specific leading indicators and provides guidance in designing a risk management structure to generate, monitor and use the results. The approach is based on the STAMP (System-Theoretic Accident Model and Processes) model of accident causation and tools that have been designed to build on that model. STAMP extends current accident causality to include more complex causes than simply component failures and chains of failure events or deviations from operational expectations. It incorporates basic principles of systems thinking and is based on systems theory rather than traditional reliability theory. - Highlights: • Much effort has gone into developing leading indicators with only limited success. • A systems-theoretic, assumption-based approach may be more successful. • Leading indicators are warning signals of an assumption’s changing vulnerability. • Heuristic biases can be controlled by using plausibility rather than likelihood

Safety indicators for the peat industry

Energy Technology Data Exchange (ETDEWEB)

Berezhnoy, S A; Sedov, Yu I; Yenoshevskiy, B A

1981-01-01

Members of the inter-institutional department of 'Labor Protection' of the KPI, in cooperation with members of the peat industry, have developed safety indicators for the peat industry in accordance with the requirements of GOST 12.4.026-76 SSBT, and established the range and order for their use. The safety indicators for the peat industry are divided into four groups (prohibiting, warning, regulating, and indicating), depending on the function.

Development of safety performance indicators in Japan

International Nuclear Information System (INIS)

Ohashi, H.; Tamao, S.; Tanaka, J.; Sawayama, T.

2001-01-01

For the purpose of safety regulations of operating nuclear power stations in Japan, the regulatory authorities utilize two types of regulations. One is the direct regulation, such as periodical inspection to inspect the function and performance of equipment important to safety, and the other is the audit type regulation such as preservation inspection to audit the compliance with the safety preservation rules. As performance indicators are expected to be an effective tool to evaluate the activities by audit type regulations, NUPEC is studying a comprehensive set of operational performance indicators to meet the effective evaluation method for the safety preservation activities in the audit type regulations under the frame of current safety regulation system. The study includes the establishment of comprehensive operational performance indicators applicable in Japan, the effective application of performance indicators to the current Japanese regulation, the clarification of the applicable scope of utilization, the possibility of applying the performance indicators. This report describes the present status of our performance indicator studies. After the completion of these studies the regulatory authorities will evaluate if and how the new set of comprehensive performance indicators could be introduced to Japanese regulatory scheme. (author)

A review of the trunk surface metrics used as Scoliosis and other deformities evaluation indices

Directory of Open Access Journals (Sweden)

Aggouris Costas

2010-06-01

Full Text Available Abstract Background Although scoliosis is characterized by lateral deviation of the spine, a 3D deformation actually is responsible for geometric and morphologic changes in the trunk and rib cage. In a vast related medical literature, one can find quite a few scoliosis evaluation indices, which are based on back surface data and are generally measured along three planes. Regardless the large number of such indices, the literature is lacking a coherent presentation of the underlying metrics, the involved anatomic surface landmarks, the definition of planes and the definition of the related body axes. In addition, the long list of proposed scoliotic indices is rarely presented in cross-reference to each other. This creates a possibility of misunderstandings and sometimes irrational or even wrong use of these indices by the medical society. Materials and methods It is hoped that the current work contributes in clearing up the issue and gives rise to innovative ideas on how to assess the surface metrics in scoliosis. In particular, this paper presents a thorough study on the scoliosis evaluation indices, proposed by the medical society. Results More specifically, the referred indices are classified, according to the type of asymmetry they measure, according to the plane they refer to, according to the importance, and relevance or the level of scientific consensus they enjoy. Conclusions Surface metrics have very little correlation to Cobb angle measurements. Indices measured on different planes do not correlate to each other. Different indices exhibit quite diverging characteristics in terms of observer-induced errors, accuracy, sensitivity and specificity. Complicated positioning of the patient and ambiguous anatomical landmarks are the major error sources, which cause observer variations. Principles that should be followed when an index is proposed are presented.

Scale-Adjusted Metrics for Predicting the Evolution of Urban Indicators and Quantifying the Performance of Cities.

Directory of Open Access Journals (Sweden)

Luiz G A Alves

Full Text Available More than a half of world population is now living in cities and this number is expected to be two-thirds by 2050. Fostered by the relevancy of a scientific characterization of cities and for the availability of an unprecedented amount of data, academics have recently immersed in this topic and one of the most striking and universal finding was the discovery of robust allometric scaling laws between several urban indicators and the population size. Despite that, most governmental reports and several academic works still ignore these nonlinearities by often analyzing the raw or the per capita value of urban indicators, a practice that actually makes the urban metrics biased towards small or large cities depending on whether we have super or sublinear allometries. By following the ideas of Bettencourt et al. [PLoS ONE 5 (2010 e13541], we account for this bias by evaluating the difference between the actual value of an urban indicator and the value expected by the allometry with the population size. We show that this scale-adjusted metric provides a more appropriate/informative summary of the evolution of urban indicators and reveals patterns that do not appear in the evolution of per capita values of indicators obtained from Brazilian cities. We also show that these scale-adjusted metrics are strongly correlated with their past values by a linear correspondence and that they also display crosscorrelations among themselves. Simple linear models account for 31%-97% of the observed variance in data and correctly reproduce the average of the scale-adjusted metric when grouping the cities in above and below the allometric laws. We further employ these models to forecast future values of urban indicators and, by visualizing the predicted changes, we verify the emergence of spatial clusters characterized by regions of the Brazilian territory where we expect an increase or a decrease in the values of urban indicators.

geo-scientific indicators for safety

International Nuclear Information System (INIS)

Andersson, J.; Bruno, G.; Deguchi, A.; Fein, E.; Larue, P.J.; Lei, S.; Leung, H.; Norris, S.; Violette, S.; Wollrath, J.

2007-01-01

Working Group A was continuation of Working Group B of AMIGO-1, but participants explored more deeply the issues surrounding geo-scientific indicators for safety. The following outcomes were expected. - List different geo-scientific arguments or indicators for safety (with motivation) for various host rocks and sites. Consider dividing the arguments into those that support isolation or retention and discuss their applicability for different time frames. - What actual measurable field evidence supports these arguments/indicators? - What kind of field evidence would go counter to these safety arguments? - What key messages are the most promising in terms of scientific credibility to contribute to the safety case? Possibly examine the same message but in terms of potential ease of communication. The session started with two introductory presentations: - Following the presentations, in discussion the Working Group listed: - Safety Functions where geo-scientific support is needed; - Commonly used chains of argument for supporting these safety functions; - Whether the applicability of the arguments are host rock or site specific and how they apply for different time frames; - Field evidence or other issues that would go counter to the safety arguments; - Key messages most promising in terms of scientific credibility to contribute to the safety case. Overall it was concluded by the Working Group that: - The most important argument is to present a clear understanding of past geological evolution at the particular site, consistent with the global understanding of geological evolution. Efforts should be made to achieve a broad consensus on this from many independent experts. - The supporting arguments are seldom based on a single piece of evidence. It is the chain of arguments rather than individual arguments that is important. - We are primarily interested in 'reasonable' predictability of the geological system. We recognize that most geological systems evolve with time

Metrics design for safety assessment

NARCIS (Netherlands)

Luo, Yaping; van den Brand, M.G.J.

2016-01-01

Context:In the safety domain, safety assessment is used to show that safety-critical systems meet the required safety objectives. This process is also referred to as safety assurance and certification. During this procedure, safety standards are used as development guidelines to keep the risk at an

Development and use of safety indicators at STUK

International Nuclear Information System (INIS)

Tiipana, P.

2001-01-01

This paper gives an outline of the development and use of STUK's indicator system at the department of Nuclear Reactor Regulation (YTO) in the Radiation and Nuclear Safety Authority, STUK. Indicators used at YTO are measures related to the safety of nuclear installations and regulatory activities. Indicators are numbers, ratios, percentages and amounts of interested matters that are for suitable for regulatory purposes, that is assessment and trending of the safety of nuclear installations and regulatory activities. STUK's indicator system is divided into two main areas: safety of nuclear facilities and regulatory activities. Safety of nuclear facilities is divided into 3 areas based on the concept of defence in de safety and quality culture, operational events and physical barriers. Regulatory activities are divided into 3 areas: working processes, resource management and regeneration and ability to work. These areas are measured using several indicators. At the moment some of indicators are included in YTO's management system to measure whether or not internally set goals are achieved. (author)

Safety indicators as a tool for operational safety evaluation of nuclear power plants

International Nuclear Information System (INIS)

Araujo, Jefferson Borges; Melo, Paulo Fernando Ferreira Frutuoso e; Schirru, Roberto

2009-01-01

Performance indicators have found a wide use in the conventional and nuclear industries. For the conventional industry, the goal is to optimize production, reducing loss of time with accidents, human error and equipment downtimes. In the nuclear industry, nuclear safety is an additional goal. This paper presents a general methodology to the establishment, selection and use of safety indicators for a two loop PWR plant, as Angra 1. The use of performance indicators is not new. The NRC has its own methodology and the IAEA presents methodology suggestions, but there is no detailed documentation about indicators selection, criteria and bases used. Additionally, only the NRC methodology performs a limited integrated evaluation. The study performed identifies areas considered critical for the plant operational safety. For each of these areas, strategic sub-areas are defined. For each strategic sub-area, specific safety indicators are defined. These proposed Safety Indicators are based on the contribution to risk considering a quantitative risk analysis. For each safety indicator, a goal, a bounded interval and proper bases are developed, to allow for a clear and comprehensive individual behavior evaluation. On the establishment of the intervals and boundaries, a probabilistic safety study, operational experience, international and national standards and technical specifications were used. Additionally, an integrated evaluation of the indicators, using expert systems, was done to obtain an overview of the plant general safety. This evaluation uses well-defined and clear rules and weights for each indicator to be considered. These rules were implemented by means of a computational language, on a friendly interface, so that it is possible to obtain a quick response about operational safety. This methodology can be used to identify situations where the plant safety is challenged, by giving a general overview of the plant operational condition. Additionally, this study can

Safety performance indicators for the road network.

NARCIS (Netherlands)

Weijermars, W. Gitelman, V. Papadimitriou, E. Lima De & Azevedo, C.

2010-01-01

Within the 6th FP European project SafetyNet, a team has worked on the development of Safety Performance Indicators (SPIs) on seven road safety related areas. These SPIs reflect the operational conditions of the road traffic system that influence the system's safety performance. SPIs were developed

Operational Safety Performance Indicators and Balanced Scorecard in HANARO

International Nuclear Information System (INIS)

Wu, Jong-Sup; Jung, Hoan-Sung; Ahn, Guk-Hoon; Lee, Kye-Hong; Lim, In-Cheol; Kim, Hark-Rho

2007-01-01

Research reactors need an extensive basis for ensuring their safety. The importance of a safety management in nuclear facilities and activities has been emphasized. The safety activities in HANARO have been continuously conducted to enhance its safe operation. Last year, HANARO prepared two indicator sets to measure and assess the safety status of the reactor's operation and utilization. One is Safety Performance Indicators (SPI) and the other is Balanced Scorecard (BSC). Through reviewing these indicators, we can obtain the following information; - Plant safety status - Safety parameter trends - Safety information, for example, reactor operation status and radiation safety HANARO will continuously pursue the trends of SPI and BSC

Development of Safety Culture Indicators for HANARO

International Nuclear Information System (INIS)

Wu, Jong-Sup; Lee, Kye-Hong

2007-01-01

Safety culture is more important than a technical matter for the management of nuclear facilities. Some of the accidents that have occurred recently in nuclear plants are important as a social problem besides a technical problem. That's why the management of nuclear plants has been focused on the safety culture to improve confidence of nuclear facilities. As for a safety culture, there are difficulties in that a tangible result does not come out clearly in spite of an effort for a long time. Some IAEA guides and reports about a safety culture and its evaluation method for nuclear power plants (NPP) were published after the Chernobyl accident. Until now there is no tool to evaluate a safety culture of for research reactors. HANARO developed its own safety culture indicators based on the IAEA's documents. The purpose of the development of the safety culture indicators is to evaluate and enhance the safety attitude in HANARO

Food safety performance indicators to benchmark food safety output of food safety management systems.

Science.gov (United States)

Jacxsens, L; Uyttendaele, M; Devlieghere, F; Rovira, J; Gomez, S Oses; Luning, P A

2010-07-31

There is a need to measure the food safety performance in the agri-food chain without performing actual microbiological analysis. A food safety performance diagnosis, based on seven indicators and corresponding assessment grids have been developed and validated in nine European food businesses. Validation was conducted on the basis of an extensive microbiological assessment scheme (MAS). The assumption behind the food safety performance diagnosis is that food businesses which evaluate the performance of their food safety management system in a more structured way and according to very strict and specific criteria will have a better insight in their actual microbiological food safety performance, because food safety problems will be more systematically detected. The diagnosis can be a useful tool to have a first indication about the microbiological performance of a food safety management system present in a food business. Moreover, the diagnosis can be used in quantitative studies to get insight in the effect of interventions on sector or governmental level. Copyright 2010 Elsevier B.V. All rights reserved.

Next-Generation Metrics: Responsible Metrics & Evaluation for Open Science

Energy Technology Data Exchange (ETDEWEB)

Wilsdon, J.; Bar-Ilan, J.; Peters, I.; Wouters, P.

2016-07-01

Metrics evoke a mixed reaction from the research community. A commitment to using data to inform decisions makes some enthusiastic about the prospect of granular, real-time analysis o of research and its wider impacts. Yet we only have to look at the blunt use of metrics such as journal impact factors, h-indices and grant income targets, to be reminded of the pitfalls. Some of the most precious qualities of academic culture resist simple quantification, and individual indicators often struggle to do justice to the richness and plurality of research. Too often, poorly designed evaluation criteria are “dominating minds, distorting behaviour and determining careers (Lawrence, 2007).” Metrics hold real power: they are constitutive of values, identities and livelihoods. How to exercise that power to more positive ends has been the focus of several recent and complementary initiatives, including the San Francisco Declaration on Research Assessment (DORA1), the Leiden Manifesto2 and The Metric Tide3 (a UK government review of the role of metrics in research management and assessment). Building on these initiatives, the European Commission, under its new Open Science Policy Platform4, is now looking to develop a framework for responsible metrics for research management and evaluation, which can be incorporated into the successor framework to Horizon 2020. (Author)

Use of social media in health promotion: purposes, key performance indicators, and evaluation metrics.

Science.gov (United States)

Neiger, Brad L; Thackeray, Rosemary; Van Wagenen, Sarah A; Hanson, Carl L; West, Joshua H; Barnes, Michael D; Fagen, Michael C

2012-03-01

Despite the expanding use of social media, little has been published about its appropriate role in health promotion, and even less has been written about evaluation. The purpose of this article is threefold: (a) outline purposes for social media in health promotion, (b) identify potential key performance indicators associated with these purposes, and (c) propose evaluation metrics for social media related to the key performance indicators. Process evaluation is presented in this article as an overarching evaluation strategy for social media.

Management and organizational indicators of process safety

International Nuclear Information System (INIS)

Van Hemel, S.B.; Connelly, E.M.; Haas, P.M.

1991-01-01

This study is part of a Nuclear Regulatory Commission research element on organizational factors in plant safety under the Human Factors research program. This paper reports that the study investigated the chemical industry, to find leading management or organizational tools which could be useful for the NRC. After collecting information form a variety of information sources, the authors concentrated our study on two types of indicators currently in use: the first is audit- or review-based, and concentrates on programmatic factors; the second, based on frequent behavioral observations, concentrates on the management of individual worker behaviors. The authors analyzed data on the relationships between the leading indictors and direct indictors such as accident and injury rates in three case studies, to determine whether sufficient evidence of validity and utility exists to justify consideration of these indicators as public safety indicators. This paper states that on the basis of statistical associations and other evidence, the authors concluded that the two indicator types have promise for use as plant safety performance indicators, and that further development and testing of the candidate indicators should be performed

Food safety performance indicators to benchmark food safety output of food safety management systems

NARCIS (Netherlands)

Jacxsens, L.; Uyttendaele, M.; Devlieghere, F.; Rovira, J.; Oses Gomez, S.; Luning, P.A.

2010-01-01

There is a need to measure the food safety performance in the agri-food chain without performing actual microbiological analysis. A food safety performance diagnosis, based on seven indicators and corresponding assessment grids have been developed and validated in nine European food businesses.

Socio-Technical Security Metrics (Dagstuhl Seminar 14491)

NARCIS (Netherlands)

Gollmann, Dieter; Herley, Cormac; Koenig, Vincent; Pieters, Wolter; Sasse, Martina Angela

2015-01-01

This report documents the program and the outcomes of Dagstuhl Seminar 14491 "Socio-Technical Security Metrics". In the domain of safety, metrics inform many decisions, from the height of new dikes to the design of nuclear plants. We can state, for example, that the dikes should be high enough to

A comparison of leading and lagging indicators of safety in naval aviation.

Science.gov (United States)

O'Connor, Paul; Cowan, Shawn; Alton, Jeffrey

2010-07-01

The purpose of this paper is to examine the results of two different methods of identifying human factors safety concerns in U.S. Naval aviation. In both studies, the information was collected using the Department of Defense Human Factors Analysis and Classification System (DoD-HFACS). In the first study, aviation mishap data (a lagging indictor) was obtained on 47 F/A-18 and 16 H-60 mishaps. In the second study, the responses of 68 squadrons to a survey regarding the human factors issues that they considered to be of the greatest safety concern were examined (a leading indicator). First study results revealed that skill-based errors were the most commonly cited factors for both F/A-18 and H-60 mishaps (70.2% and 81.3%, respectively). More specifically, the most commonly used nanocodes were 'over control/ under control' (27.7% and 56.3%, respectively), 'breakdown in visual scan' (27.7% and 12.5%, respectively), and 'procedural errors' (23.4% and 37.6%, respectively). The second study identified that the main concern of F/A-18 and H-60 aviators was workload and operational tempo (identified by 85% of squadrons). It can be concluded that the nanocodes that were most commonly used to classify the causes of past mishaps were not identified as major concerns by the squadrons who responded to the survey. The findings from these studies emphasize the importance of examining a number of performance metrics to ensure that effective measures are being taken to improve safety.

48 CFR 611.002-70 - Metric system implementation.

Science.gov (United States)

2010-10-01

... with security, operations, economic, technical, logistical, training and safety requirements. (3) The... total cost of the retrofit, including redesign costs, exceeds $50,000; (ii) Metric is not the accepted... office with an explanation for the disapproval. (7) The in-house operating metric costs shall be...

Improvement programme of safety performance indicators (SPIs) in Korea

International Nuclear Information System (INIS)

Lee, S.Y.

2001-01-01

KINS has developed and used Safety Performance Indicators (SPIs), which are count based and composed of 10 indicators in 8 areas, to monitor the trend of performance of NPPs in Korea since 1997. However, the limited usage of SPIs and the increasing worldwide interest on SPIs became the motivation of the SPI improvement programme in Korea. Korea is planning to establish plant performance evaluation programme through analysis of SPI and result of inspection. The SPI improvement programme is a part of the plant performance evaluation programme and includes study on performance evaluation areas, indicator categories, selection and development of indicators, redefinition of indicators and introduction of graphical display system. The selected performance evaluation areas are general performance, reactor safety and radiation safety. Each area will have categories as sub-areas and a total of six categories are selected. One or two indicators for each category are determined or will be developed to make a set of Safety Performance Indicators. Also, a graphic display system will be introduced to extend the usage of SPIs. (author)

Assessment of multi-version NPP I and C systems safety. Metric-based approach, technique and tool

International Nuclear Information System (INIS)

Kharchenko, Vyacheslav; Volkovoy, Andrey; Bakhmach, Eugenii; Siora, Alexander; Duzhyi, Vyacheslav

2011-01-01

The challenges related to problem of assessment of actual diversity level and evaluation of diversity-oriented NPP I and C systems safety are analyzed. There are risks of inaccurate assessment and problems of insufficient decreasing probability of CCFs. CCF probability of safety-critical systems may be essentially decreased due to application of several different types of diversity (multi-diversity). Different diversity types of FPGA-based NPP I and C systems, general approach and stages of diversity and safety assessment as a whole are described. Objectives of the report are: (a) analysis of the challenges caused by use of diversity approach in NPP I and C systems in context of FPGA and other modern technologies application; (b) development of multi-version NPP I and C systems assessment technique and tool based on check-list and metric-oriented approach; (c) case-study of the technique: assessment of multi-version FPGA-based NPP I and C developed by use of Radiy TM Platform. (author)

A concept of safety indicator system for nuclear power plants

International Nuclear Information System (INIS)

Lehtinen, E.

1995-12-01

The fundamental principle in the safety technology of nuclear power is embodied in the strategy of defence in depth. The defence lines of the strategy, completed with a PSA logic model and structure, are considered to provide an appropriate framework for identification and structuring of the operational safety performance areas for nuclear power plants. Once these areas are identified the safety indicators can be defined. Based on this approach a concept of safety indicator system was outlined. About one hundred indicator specifications have been collected, refined and related to the performance areas. The specifications enable the utilities and authorities to check the coverage of their indicators set from the operational safety point of view and select or refine indicators for testing and routine use. Finally various statistical approaches and methods for using indicators in performance evaluation are presented. (orig.) (16 refs., 2 figs., 2 tabs.)

Let's Make Metric Ice Cream

Science.gov (United States)

Zimmerman, Marianna

1975-01-01

Describes a classroom activity which involved sixth grade students in a learning situation including making ice cream, safety procedures in a science laboratory, calibrating a thermometer, using metric units of volume and mass. (EB)

Safety system function trend indicator: Theory and test application

International Nuclear Information System (INIS)

Azarm, M.A.; Carbonaro, J.F.; Boccio, J.L.; Vesely, W.E.

1989-01-01

The purpose of this paper is to summarize research conducted on the development and validation of quantitative indicators of safety performance. This work, performed under the Risk-Based Performance Indicator (RBPI) Project, FIN A-3295, for the Office of Research (RES), is considered part of NRC's Performance Indicator Program which is being coordinated through the Office for the Analysis and Evaluation of Operational Data (AEOD). The program originally focused on risk-based indicators at high levels of safety indices (e.g., core-damage frequency, functional unavailabilities, and sequence monitoring). The program was then redirected towards a more amenable goal, safety system unavailability indicators, mainly due to the lack of PRA models and plant data. In that regard, BNL published a technical report that introduced the concept of cycle-based indicators and also described various alternatives of monitoring safety system unavailabilities. Further simplification of these indicators was requested by NRC to facilitate their applications to all plants in a timely manner. This resulted in the development of Safety System Function Trend (SSFT) indicators which minimize the need for detailed system model as well as component history. The theoretical bases for these indicators were developed through various simulation studies to determine the ease of detecting a trend and/or unacceptable performance. These indicators, along with several other indicators, were then generated and compared using plant data as a part of a test application. The SSFT indicators, specifically, were constructed for a total of eight plants, consisting of two systems per plant. Emphasis was placed on examining relative changes, as well as the indicator's actual level. Both the trend and actual indicator level were found to be important in identifying plants with potential problems

Processes on Uncontrolled Aerodromes and Safety Indicators - Part II

Directory of Open Access Journals (Sweden)

Vladimír Plos

2014-01-01

Full Text Available This article follows on the Part I, where the basic processes on uncontrolled aerodromes were introduced. The uncontrolled aerodromes face with the growing traffic and from that result the higher workload on AFIS officer. This means a higher potential for dangerous situations.The article describes some models of sub-processes and creates several safety indicators related to the operation at uncontrolled aerodromes. Thanks to monitoring and evaluation of safety indicators can be adopted targeted safety measures and thus increase safety on small uncontrolled aerodromes.

Development of safety performance indicators of regulatory interest (SAFPER) in Pakistan

International Nuclear Information System (INIS)

Khatoon, Abida

2002-01-01

Safety performance indicators provide a very useful tool for monitoring operational safety of a nuclear power plant. Utilities in many countries have developed plant specific indicators for the assessment of their performance and safety. Regulators can make use of some of these indicators for their regulatory assessment. In addition to these regulatory bodies in some countries have also developed programs for the formulation of safety performance indicators which are used in monitoring operational safety and regulatory decision making. Realizing its usefulness Directorate of Nuclear Safety and Radiation Protection (DNSRP-the regulatory body in Pakistan) has also initiated a country specific program for the development of Safety Performance Indicators (SAFPER) based on data provided by the utility and that collected during the course of regulatory inspections. Selected areas of NPP operation to be monitored are: - Significant events; - Safety systems performance; - Barriers integrity; - Environment protection; - Workers radiation safety; and - Emergency Preparedness. One of the objectives of this program is also to monitor the effectiveness of DNSRP regulatory activities. IAEA framework is taken as one of the bases for our program. Safety performance will be assessed on the basis of Performance Indicators and inspection findings. DNSRP program as shown in Appendix includes the indicators in use and under development. It is felt that the term Safety Performance Indicators may be termed as 'SAFPER Indicators' to be used by the Regulators, as it is clear from this presentation that utility safety performance indicators together with the regulatory effectiveness indicators constitute the measure for the adequate safety to the public and the environment. Additional research is still necessary for: - indicator definition for the proposed and under developed indicators; - data collection systems; - thresholds; - trend analysis; - goal setting (benefit from the trend can be

Measurable Control System Security through Ideal Driven Technical Metrics

Energy Technology Data Exchange (ETDEWEB)

Miles McQueen; Wayne Boyer; Sean McBride; Marie Farrar; Zachary Tudor

2008-01-01

The Department of Homeland Security National Cyber Security Division supported development of a small set of security ideals as a framework to establish measurable control systems security. Based on these ideals, a draft set of proposed technical metrics was developed to allow control systems owner-operators to track improvements or degradations in their individual control systems security posture. The technical metrics development effort included review and evaluation of over thirty metrics-related documents. On the bases of complexity, ambiguity, or misleading and distorting effects the metrics identified during the reviews were determined to be weaker than necessary to aid defense against the myriad threats posed by cyber-terrorism to human safety, as well as to economic prosperity. Using the results of our metrics review and the set of security ideals as a starting point for metrics development, we identified thirteen potential technical metrics - with at least one metric supporting each ideal. Two case study applications of the ideals and thirteen metrics to control systems were then performed to establish potential difficulties in applying both the ideals and the metrics. The case studies resulted in no changes to the ideals, and only a few deletions and refinements to the thirteen potential metrics. This led to a final proposed set of ten core technical metrics. To further validate the security ideals, the modifications made to the original thirteen potential metrics, and the final proposed set of ten core metrics, seven separate control systems security assessments performed over the past three years were reviewed for findings and recommended mitigations. These findings and mitigations were then mapped to the security ideals and metrics to assess gaps in their coverage. The mappings indicated that there are no gaps in the security ideals and that the ten core technical metrics provide significant coverage of standard security issues with 87% coverage. Based

Airport Ground Operations Risks and Establishment of the Safety Indicators

Directory of Open Access Journals (Sweden)

Slobodan Stojić

2016-07-01

Full Text Available This paper brings a relatively new approach to air transport safety. This approach introduces the safety indicators whose application’s primer goal is to reduce the number of aviation safety events and to search for their causes. These causes are defined as factors contributing to safety event realisation. These are supposed to be adequately identified and then prevented or at least mitigated. Defined safety indicators are focused on airport processes and subjects.

Operational safety performance indicator system at the Dukovany Nuclear Power Plant - Experience with indicator aggregation

International Nuclear Information System (INIS)

Mandula, J.

2001-01-01

The operational safety performance indicators serve as an important tool of performance monitoring and management at the Dukovany NPP. A software-supported system has been developed, which has included: data collection, central data storage, graphic output production and periodical report generation. Analyses of performance indicator trends together with evaluation in respect of annually updated target values and acceptance criteria are used for operational safety reviews forming an integral part of continual self-assessment process. This contribution has been focused on experience obtained during development of the operational safety assessment model using indicator aggregation. It summarises problems that had to be paid specific attention in the development process. Thanks to their solution, the model has become a synoptic monitor and a useful tool for operational safety assessment. (author)

A road safety performance indicator for vehicle fleet compatibility.

NARCIS (Netherlands)

Christoph, M. Vis, M.A. Rackliff, L. & Stipdonk, H.

2013-01-01

This paper discusses the development and the application of a safety performance indicator which measures the intrinsic safety of a country's vehicle fleet related to fleet composition. The indicator takes into account both the ‘relative severity’ of individual collisions between different vehicle

Critical review of safety performance metrics

NARCIS (Netherlands)

Karanikas, Nektarios

2016-01-01

Various tools for safety performance measurement have been introduced in order to fulfil the need for safety monitoring in organisations, which is tightly related to their overall performance and achievement of their business goals. Such tools include accident rates, benchmarking, safety culture and

Indicators to monitor NPP safety performance. Working material

International Nuclear Information System (INIS)

1997-01-01

Numerical indicators to monitor safety status and overall safety performance of nuclear power plants (NPPs) are used by operators and some regulators worldwide. During the last few years, the IAEA, through Technical Committee Meetings and Consultants' Meetings has worked on this area. This report presents a framework for nuclear power plant safety performance indicators that was developed during two consultant meetings held at the IAEA headquarters in Vienna in December 1995 and November 1996. Annex 2 on risk based indicators was prepared during a consultants' meeting held in Vienna in July 1996. An additional outcome from these activities, was the recommendation that the IAEA conduce pilot exercises at several nuclear power plants that might be interested to participate, in order to test the validity of the concept and its usefulness. 6 figs

Safety functions and safety function indicators - key elements in SKB'S methodology for assessing long-term safety of a KBS-3 repository

International Nuclear Information System (INIS)

Hedin, A.

2008-01-01

The application of so called safety function indicators in SKB safety assessment of a KBS-3 repository for spent nuclear fuel is presented. Isolation and retardation are the two main safety functions of the KBS-3 concept. In order to quantitatively evaluate safety on a sub-system level, these functions need to be differentiated, associated with quantitative measures and, where possible, with quantitative criteria relating to the fulfillment of the safety functions. A safety function is defined as a role through which a repository component contributes to safety. A safety function indicator is a measurable or calculable property of a repository component that allows quantitative evaluation of a safety function. A safety function indicator criterion is a quantitative limit such that if the criterion is fulfilled, the corresponding safety function is upheld. The safety functions and their associated indicators and criteria developed for the KBS-3 repository are primarily related to the isolating potential and to physical states of the canister and the clay buffer surrounding the canister. They are thus not directly related to release rates of radionuclides. The paper also describes how the concepts introduced i) aid in focussing the assessment on critical, safety related issues, ii) provide a framework for the accounting of safety throughout the different time frames of the assessment and iii) provide key information in the selection of scenarios for the safety assessment. (author)

Operational safety performance indicators for nuclear power plants

International Nuclear Information System (INIS)

2000-05-01

Since the late 1980s, the IAEA has been actively sponsoring work in the area of indicators to monitor nuclear power plant (NPP) operational safety performance. The early activities were mainly focused on exchanging ideas and good practices in the development and use of these indicators at nuclear power plants. Since 1995 efforts have been directed towards the elaboration of a framework for the establishment of an operational safety performance indicator programme. The result of this work, compiled in this publication, is intended to assist NPPs in developing and implementing a monitoring programme, without overlooking the critical aspects related to operational safety performance. The framework proposed in this report was presented at two IAEA workshops on operational safety performance indicators held in Ljubljana, Slovenia, in September 1998 and at the Daya Bay NPP, Szenzhen, China, in December 1998. During these two workshops, the participants discussed and brainstormed on the indicator framework presented. These working sessions provided very useful insights and ideas which where used for the enhancement of the framework proposed. The IAEA is acknowledging the support and contribution of all the participants in these two activities. The programme development was enhanced by pilot plant studies. Four plants from different countries with different designs participated in this study with the objective of testing the applicability, usefulness and viability of this approach

A road safety performance indicator for vehicle fleet compatibility.

Science.gov (United States)

Christoph, Michiel; Vis, Martijn Alexander; Rackliff, Lucy; Stipdonk, Henk

2013-11-01

This paper discusses the development and the application of a safety performance indicator which measures the intrinsic safety of a country's vehicle fleet related to fleet composition. The indicator takes into account both the 'relative severity' of individual collisions between different vehicle types, and the share of those vehicle types within a country's fleet. The relative severity is a measure for the personal damage that can be expected from a collision between two vehicles of any type, relative to that of a collision between passenger cars. It is shown how this number can be calculated using vehicle mass only. A sensitivity analysis is performed to study the dependence of the indicator on parameter values and basic assumptions made. The indicator is easy to apply and satisfies the requirements for appropriate safety performance indicators. It was developed in such a way that it specifically scores the intrinsic safety of a fleet due to its composition, without being influenced by other factors, like helmet wearing. For the sake of simplicity, and since the required data is available throughout Europe, the indicator was applied to the relative share of three of the main vehicle types: passenger cars, heavy goods vehicles and motorcycles. Using the vehicle fleet data from 13EU Member States and Norway, the indicator was used to rank the countries' safety performance. The UK was found to perform best in terms of its fleet composition (value is 1.07), while Greece has the worst performance with the highest indicator value (1.41). Copyright © 2013 Elsevier Ltd. All rights reserved.

Socio-technical security metrics

NARCIS (Netherlands)

Gollmann, D.; Herley, C.; Koenig, V.; Pieters, W.; Sasse, M.A.

2015-01-01

Report from Dagstuhl seminar 14491. This report documents the program and the outcomes of Dagstuhl Seminar 14491 “Socio-Technical Security Metrics”. In the domain of safety, metrics inform many decisions, from the height of new dikes to the design of nuclear plants. We can state, for example, that

The spin project: safety and performance indicators in different time frames

International Nuclear Information System (INIS)

Storck, R.; Becker, D.A.

2002-01-01

Safety and performance indicators have been under discussion for many years in several countries and international organisations. If those indicators refer to the long term safety of the total disposal system, they are often called safety indicators. If they refer to the performance of subsystems or the total system from a more technical point of view, they are sometimes called performance indicators. The need for indicators other than dose rates derives e.g. from the long time frames involved in safety assessments of waste disposal systems and the increasing uncertainty in dose rate calculations over time due to uncertainty in evolution of the surface environment and of behaviour of man. Before introducing additional indicators into a safety case of a potential repository site, the applicability and usefulness of different indicators have to be investigated and evaluated. The systematic analysis and testing of safety and performance indicators for use in different time horizons after closure of the disposal facility is the task of the SPIN project. This is done by re-calculating four recent studies concerning repository projects in granite formations. (authors)

The safety indicators program in Taiwan, China : a six-year trend

International Nuclear Information System (INIS)

Hsu, Mingte

1998-01-01

This paper presents data on the current operating status and the safety indicators (SI) of the six nuclear power units in Taiwan. Analysis of the data collected in a six-year period has been made to obtain trends for each safety indicator. An overview of the trends of the plant operational data during the same period are also provided and discussed. On the whole, the trends of safety indicators are improving during the observed period 1991-1996. The plant operational data have depicted coherent improvement with the safety indicator trends. This result supports the premise that improvements in safety performance and in operational reliability are correspondingly inter-dependent. Both the safety indicators quarterly report and the annual report are available to the public. The public can also approach this information from the AEC's World Wide Web site (http://www.aec.gov.tw). (author)

Measuring safety in aviation : empirical results about the relation between safety outcomes and safety management system processes, operational activities and demographic data

NARCIS (Netherlands)

Kaspers, Steffen; Karanikas, Nektarios; Piric, Selma; van Aalst, Robbert; de Boer, Robert Jan; Roelen, Alfred

2017-01-01

A literature review conducted as part of a research project named “Measuring Safety in Aviation – Developing Metrics for Safety Management Systems” revealed several challenges regarding the safety metrics used in aviation. One of the conclusions was that there is limited empirical evidence about the

Risk-based safety performance indicators for nuclear power plants

International Nuclear Information System (INIS)

Chakraborty, S.; Prohaska, G.; Flodin, Y.; Grint, G.; Habermacher, H.; Hallman, A.; Isasia, R.; Melendez, E.; Verduras, E.; Karsa, Z.; Khatib-Rahbar, M.; Koeberlein, K.; Schwaeger, C.; Matahri, N.; Moravcik, I.; Tkac, M.; Preston, J.

2003-01-01

In a Concerted Action (CA), sponsored by the European Commission within its 5th Framework Program, a consortium of eleven partners from eight countries has reviewed and evaluated the application of Safety Performance Indicators (SPIs), which - in combination with other tools - can be used to monitor and improve the safety of nuclear power plants. The project was aimed at identification of methods that can be used in a risk-informed regulatory system and environment, and to exploit PSA techniques for the development and use of meaningful additional/alternative SPIs. The CA included the review of existing indicator systems, and the collection of information on the experience from indicator systems by means of a specific questionnaire. One of the most important and challenging issues for nuclear plant owners and/or regulators is to recognize early signs of deterioration in safety performance, caused by influences from management, organization and safety culture (MOSC), before actual events and/or mishaps take place. Most of the existing SPIs as proposed by various organizations are considered as 'lagging' indicators, that is, they are expected to show an impact only when a downward trend has already started. Furthermore, most of the available indicators are at a relatively high level, such that they will not provide useful information on fundamental weaknesses causing the problem in the first place. Regulators' and utilities' views on the use of a Safety Performance Indicator System have also been a part of the development of the CA. (author)

Contribution to a quantitative assessment model for reliability-based metrics of electronic and programmable safety-related functions

International Nuclear Information System (INIS)

Hamidi, K.

2005-10-01

The use of fault-tolerant EP architectures has induced growing constraints, whose influence on reliability-based performance metrics is no more negligible. To face up the growing influence of simultaneous failure, this thesis proposes, for safety-related functions, a new-trend assessment method of reliability, based on a better taking into account of time-aspect. This report introduces the concept of information and uses it to interpret the failure modes of safety-related function as the direct result of the initiation and propagation of erroneous information until the actuator-level. The main idea is to distinguish the apparition and disappearance of erroneous states, which could be defined as intrinsically dependent of HW-characteristic and maintenance policies, and their possible activation, constrained through architectural choices, leading to the failure of safety-related function. This approach is based on a low level on deterministic SED models of the architecture and use non homogeneous Markov chains to depict the time-evolution of probabilities of errors. (author)

Responses of aquatic macrophytes to anthropogenic pressures: comparison between macrophyte metrics and indices.

Science.gov (United States)

Camargo, Julio A

2018-02-26

Macrophyte responses to anthropogenic pressures in two rivers of Central Spain were assessed to check if simple metrics can exhibit a greater discriminatory and explanatory power than complex indices at small spatial scales. Field surveys were undertaken during the summer of 2014 (Duraton River) and the spring of 2015 (Tajuña River). Aquatic macrophytes were sampled using a sampling square (45 × 45 cm). In the middle Duraton River, macrophytes responded positively to the presence of a hydropower dam and a small weir, with Myriophyllum spicatum and Potamogeton pectinatus being relatively favored. Index of Macrophytes (IM) was better than Macroscopic Aquatic Vegetation Index (MAVI) and Fluvial Macrophyte Index (FMI) in detecting these responses, showing positive and significant correlations with total coverage, species richness, and species diversity. In the upper Tajuña River, macrophytes responded both negatively and positively to the occurrence of a trout farm effluent and a small weir, with Leptodictyum riparium and Veronica anagallis-aquatica being relatively favored. Although IM, MAVI, and FMI detected both negative and positive responses, correlations of IM with total coverage, species richness, and species diversity were higher. Species evenness was not sensitive enough to detect either positive or negative responses of aquatic macrophytes along the study areas. Overall, traditional and simple metrics (species composition, total coverage, species richness, species diversity) exhibited a greater discriminatory and explanatory power than more recent and complex indices (IM, MAVI, FMI) when assessing responses of aquatic macrophytes to anthropogenic pressures at impacted specific sites.

Safety performance indicators used by the Russian Safety Regulatory Authority in its practical activities on nuclear power plant safety regulation

International Nuclear Information System (INIS)

Khazanov, A.L.

2005-01-01

The Sixth Department of the Nuclear, Industrial and Environmental Regulatory Authority of Russia, Scientific and Engineering Centre for Nuclear and Radiation Safety process, analyse and use the information on nuclear power plants (NPPs) operational experience or NPPs safety improvement. Safety performance indicators (SPIs), derived from processing of information on operational violations and analysis of annual NPP Safety Reports, are used as tools to determination of trends towards changing of characteristics of operational safety, to assess the effectiveness of corrective measures, to monitor and evaluate the current operational safety level of NPPs, to regulate NPP safety. This report includes a list of the basic SPIs, those used by the Russian safety regulatory authority in regulatory activity. Some of them are absent in list of IAEA-TECDOC-1141 ('Operational safety performance indicators for nuclear power plants'). (author)

Safety performance evaluation using proactive indicators in a selected industry

Directory of Open Access Journals (Sweden)

Abolfazl Barkhordari

2015-03-01

Full Text Available Background & Objectives: Quality and effectiveness of safety systems are critical factors in achieving their goals. This study was aimed to represent a method for performance evaluation of safety systems by proactive indicators using different updated models in the field of safety which will be tested in a selected industry. Methods: This study is a cross-sectional study. Proactive indicators used in this study were: Unsafe acts rate, Safety Climate, Accident Proneness, and Near-miss incident rate. The number of in 1473 safety climate questionnaires and 543 Accident Proneness questionnaires was completed. Results: The minimum and maximum safety climate score were 56.88 and 58.2, respectively, and the minimum and maximum scores of Accident Proneness were 98.2 and 140.7, respectively. The maximum number of Near-miss incident rate were 408 and the minimum of that was 196. The maximum number of unsafe acts rate was 43.8 percent and the minimum of that was 27.2 percent. In nine dimensions of Safety climate the eighth dimension (personal perception of risk with the score of 4.07 has the lowest score and the fourth (laws and safety regulations dimension with 8.05 has the highest score. According to expert opinions, the most important indicator in the assessment of safety performance was unsafe acts rate, while near-miss incident rate was the least important one. Conclusion: The results of this survey reveal that using proactive (Prospective indicators could be an appropriate method in organizations safety performance evaluation.

Road safety performance indicators for the interurban road network.

NARCIS (Netherlands)

Yannis, G. Weijermars, W.A.M. Gitelman, V. Vis, M. Chazirisa, A. Papadimitriou, E. & Lima Azevedo, C.

2013-01-01

Various road safety performance indicators (SPIs) have been proposed for different road safety research areas, mainly as regards driver behaviour (e.g. seat belt use, alcohol, drugs, etc.) and vehicles (e.g. passive safety); however, no SPIs for the road network and design have been developed. The

16 CFR 1511.8 - Metric references.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Metric references. 1511.8 Section 1511.8 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS... parentheses for convenience and information only. ...

Natural safety indicators and their application to repository safety cases

International Nuclear Information System (INIS)

Miller, B.

2002-01-01

Radiological dose and risk are the standard end-points calculated in all performance assessments. Their calculation requires, however, assumptions to be made for future human behaviour. To complement dose and risk, other safety indicators have been suggested which do not require such assumptions to be made. One proposed set of safety indicators are the concentrations and fluxes of naturally-occurring chemical species in the environment which may be compared with the performance assessment predictions of repository releases. Such comparisons can be valid because both the natural and repository species would occur in the same system and their transport behaviour would be controlled by exactly the same processes at the same rates. Although simple in concept, there is currently no consensus on the most appropriate comparisons to make or on the interpretation of such comparisons. A number of national and international research projects are evaluating this proposed approach, including an IAEA Co-ordinated Research Programme. These projects suggest that that the approach appears to be workable and that it may be a valuable component of a safety case, complementing the dose and risk presentations. Further work is, however, necessary to develop the approach to a level where it may be confidently applied in further performance assessments in a consistent and methodical manner. (author)

Performance indicators at Embalse NPP: PSA and safety system indicators based on PSA models

International Nuclear Information System (INIS)

Fornero, D.A.

2001-01-01

Several indicators have been implemented at Embalse NPP. The objective was selecting some representative parameters to evaluate the performance of both the plant and the personnel activities, important for safety. A first set of indicators was defined in accordance with plant technical staff criteria. A complementary set of them was addressed later based on WANO guidance. This report presents the set of indicators used at Embalse NPP, centering the description to related to safety systems performance indicators (SSPI). Some considerations are done about the calculation methods, the need for aligning and updating their values following Embalse Probabilistic Safety Assessment (PSA) development, and some pros and cons of using the PSA model for getting systems indicators. Owing to the fact that PSA ownership by utilities is also a subject of the meeting, some characteristics of the organization of the PSA Project are described at the beginning of the report. At Embalse NPP a Level 1 PSA has been developed under the responsibility of its own plant and with an important contribution from the IAEA. PSA was developed at the site, conducting this to a study strongly interactive with the station staff. (author)

Long term safety requirements and safety indicators for the assessment of underground radioactive waste repositories

International Nuclear Information System (INIS)

Vovk, Ivan

1998-01-01

This presentation defines: waste disposal, safety issues, risk estimation; describes the integrated waste disposal process including quality assurance program. Related to actinides inventory it shows the main results of calculated activity obtained by deterministic estimation. It includes the Radioactive Waste Safety Standards and requirements; features related to site, design and waste package characteristics, as technical long term safety criteria for radioactive waste disposal facilities. Fundamental concern regarding the safety of radioactive waste disposal systems is their radiological impact on human beings and the environment. Safety requirements and criteria for judging the level of safety of such systems have been developed and there is a consensus among the international community on their basis within the well-established system of radiological protection. So far, however, little experience has been gained in applying long term safety criteria to actual disposal systems; consequently, there is an international debate on the most appropriate nature and form of the criteria to be used, taking into account the uncertainties involved. Emerging from the debate is the increasing conviction that the combined use of a variety of indicators would be advantageous in addressing the issue of reasonable assurance in the different time frames involved and in supporting the safety case for any particular repository concept. Indicators including risk, dose, radionuclide concentration, transit time, toxicity indices, fluxes at different points within the system, and barrier performance have all been identified as potentially relevant. Dose and risk are the indicators generally seen as most fundamental, as they seek directly to describe the radiological impact of a disposal system, and these are the ones that have been incorporated into most national standards to date. There are, however, certain problems in applying them. Application of a variety of different indicators

Resources available for applying metrics in security and safety programming.

Science.gov (United States)

Luizzo, Anthony

2016-01-01

Incorporating metrics into security surveys has been championed as a better way of substantiating program-related effectiveness and expenditures. Although security surveys have been aroundfor well over 40 years, rarely, if ever, have metric-related strategies been part of the equation, the author says. In this article, he cites several published articles and research findings available to security professionals and their surveyors that may give them the expertise and confidence they need to make use of this valuable tool.

Leading and lagging indicators of occupational health and safety: The moderating role of safety leadership.

Science.gov (United States)

Sheehan, Cathy; Donohue, Ross; Shea, Tracey; Cooper, Brian; Cieri, Helen De

2016-07-01

In response to the call for empirical evidence of a connection between leading and lagging indicators of occupational health and safety (OHS), the first aim of the current research is to consider the association between leading and lagging indicators of OHS. Our second aim is to investigate the moderating effect of safety leadership on the association between leading and lagging indicators. Data were collected from 3578 employees nested within 66 workplaces. Multi-level modelling was used to test the two hypotheses. The results confirm an association between leading and lagging indicators of OHS as well as the moderating impact of middle management safety leadership on the direct association. The association between leading and lagging indicators provides OHS practitioners with useful information to substantiate efforts within organisations to move away from a traditional focus on lagging indicators towards a preventative focus on leading indicators. The research also highlights the important role played by middle managers and the value of OHS leadership development and investment at the middle management level. Copyright © 2016 Elsevier Ltd. All rights reserved.

Validation of risk-based performance indicators: Safety system function trends

International Nuclear Information System (INIS)

Boccio, J.L.; Vesely, W.E.; Azarm, M.A.; Carbonaro, J.F.; Usher, J.L.; Oden, N.

1989-10-01

This report describes and applies a process for validating a model for a risk-based performance indicator. The purpose of the risk-based indicator evaluated, Safety System Function Trend (SSFT), is to monitor the unavailability of selected safety systems. Interim validation of this indicator is based on three aspects: a theoretical basis, an empirical basis relying on statistical correlations, and case studies employing 25 plant years of historical data collected from five plants for a number of safety systems. Results using the SSFT model are encouraging. Application of the model through case studies dealing with the performance of important safety systems shows that statistically significant trends in, and levels of, system performance can be discerned which thereby can provide leading indications of degrading and/or improving performances. Methods for developing system performance tolerance bounds are discussed and applied to aid in the interpretation of the trends in this risk-based indicator. Some additional characteristics of the SSFT indicator, learned through the data-collection efforts and subsequent data analyses performed, are also discussed. The usefulness and practicality of other data sources for validation purposes are explored. Further validation of this indicator is noted. Also, additional research is underway in developing a more detailed estimator of system unavailability. 9 refs., 18 figs., 5 tabs

A proposal of safety indicators aggregation to assess the safety management effectiveness of nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Carvalho, Jose Antonio B.; Saldanha, Pedro L.C. [Comissao Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil). Coordenacao-Geral de Reatores e Ciclo Combustivel], e-mail: jantonio@cnen.gov.br, e-mail: saldanha@cnen.gov.br; Melo, Paulo F.F. Frutuoso e [Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear], e-mail: frutuoso@con.ufrj.br

2009-07-01

Safety management has changed with the evolution of management methods, named Quality Systems, moving from Quality Control, where the focus was the product, passing through Quality Assurance, which takes care of the whole manufacturing process and reaching the Total Quality Management, where policies and goals are established. Nowadays, there is a trend towards Management Systems, which integrate all different aspects related to the management of an organization (safety, environment, security, quality, costs and, etc), but it is necessary to have features to establish and assure that safety overrides the remaining aspects. The most usual way to reach this goal is to establish a policy where safety is a priority, but its implementation and the assessment of its effectiveness are no so simple. Nuclear power plants usually have over a hundred safety indicators in many processes dedicated to prevent and detect problems, although a lot of them do not evaluate these indicators in an integrated manner or point out degradation trends of organizational aspects, which can affect the plant safety. This work develops an aggregation of proactive and reactive safety indicators in order to evaluate the effectiveness of nuclear power plant safety management and to detect, at early stages, signs of process degradation or activities used to establish, maintain and assure safety conditions. The aggregation integrates indicators of the usual processes and is based on the manner the management activities have been developed in the last decades, that is: Planning, Doing, Checking and Acting - known as PDCA cycle - plus a fifth element related to the capability of those who perform safety activities. The proposed aggregation is in accordance to Brazilian standards and international recommendations and constitutes a friendly link between the top management level and the daily aspects of the organization. (author)

A proposal of safety indicators aggregation to assess the safety management effectiveness of nuclear power plants

International Nuclear Information System (INIS)

Carvalho, Jose Antonio B.; Saldanha, Pedro L.C.; Melo, Paulo F.F. Frutuoso e

2009-01-01

Safety management has changed with the evolution of management methods, named Quality Systems, moving from Quality Control, where the focus was the product, passing through Quality Assurance, which takes care of the whole manufacturing process and reaching the Total Quality Management, where policies and goals are established. Nowadays, there is a trend towards Management Systems, which integrate all different aspects related to the management of an organization (safety, environment, security, quality, costs and, etc), but it is necessary to have features to establish and assure that safety overrides the remaining aspects. The most usual way to reach this goal is to establish a policy where safety is a priority, but its implementation and the assessment of its effectiveness are no so simple. Nuclear power plants usually have over a hundred safety indicators in many processes dedicated to prevent and detect problems, although a lot of them do not evaluate these indicators in an integrated manner or point out degradation trends of organizational aspects, which can affect the plant safety. This work develops an aggregation of proactive and reactive safety indicators in order to evaluate the effectiveness of nuclear power plant safety management and to detect, at early stages, signs of process degradation or activities used to establish, maintain and assure safety conditions. The aggregation integrates indicators of the usual processes and is based on the manner the management activities have been developed in the last decades, that is: Planning, Doing, Checking and Acting - known as PDCA cycle - plus a fifth element related to the capability of those who perform safety activities. The proposed aggregation is in accordance to Brazilian standards and international recommendations and constitutes a friendly link between the top management level and the daily aspects of the organization. (author)

New safety performance indicators for safety assessment of radioactive waste disposal facilities. Cuban experience

International Nuclear Information System (INIS)

Peralta Vital, J.L.; Castillo, R.G.; Olivera, J.

2002-01-01

The paper shows the Cuban experience on implementing geological disposal of radioactive waste and the necessity for identifying new safety performance indicators for the safety assessment (SA) of radioactive waste disposal facilities. The selected indicator was the concentration of natural radioactive elements (U, Ra, Th, K) in the Cuban geologic environment. We have carried out a group of investigations, which have allowed characterising the concentration for the whole Country, creating a wide database where this indicator is associated with the lithology. The main lithologies in Cuba are: the sedimentary rocks (70 percent of national occurrence), which are present in the three regions (limestone and lutite), and finally the igneous and metamorphic rocks. The results show the concentrations ranges of the natural radionuclides associated fundamentally to the variation in the lithology and geographical area of the Country. In Cuba, the higher concentration (ppm) of Uranium and Radium are referenced to the Central region associated to Skarn, while for Thorium (ppm) and Potassium (%), in the East region the concentration peaks in Tuffs have been found. The concentrations ranges obtained are preliminary, they characterise the behaviour of this parameter for the Cuban geology, but they do not represent limits for safety assessment purposes yet. Also other factors should be taken into account as the assessment context, time scales and others assumptions before establishing the final concentration limits for the natural radionuclides as a radiological and nuclear safety performance indicator complementary to dose and risk for safety assessment for radiological and nuclear facilities. (author)

IAEA activities related to safety indicators, time frames and reference scenarios

International Nuclear Information System (INIS)

Batandjieva, B.; Hioki, K.; Metcalf, P.

2002-01-01

The fundamental principles for the safe management of radioactive waste have been agreed internationally and form the basis for the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management that entered into force in June 2001. Protection of human health and the environment and safety of facilities (including radioactive waste disposal facilities) are widely recognised principles to be followed and demonstrated in post-closure safety assessment of waste repositories. Dose and risk are at present internationally agreed safety criteria, used for judging the acceptability of such facilities. However, there have been a number of activities initiated and co-ordinated by the International Atomic Energy Agency (IAEA) which have provided an international forum for discussion and consensus building on the use safety indicators which are complementary to dose and risk. The Agency has been working on the definition of other safety indicators, such as flux, time, environmental concentration, etc.; the desired characteristics, and use of these indicators in different time frames. The IAEA has focused on safety indicators related to geological disposal, exploring their role in the development of a safety case, evaluating the advantages and disadvantages of using other safety indicators and how they complement the dose and risk indicators. The use of these indicators have been discussed also from regulatory perspective, mainly in terms of achieving reasonable assurance and confidence in safety assessments for waste repositories and decision making in the presence of uncertainty in the context of disposal of long-lived waste. Considerable effort has also been expended by the Agency on the development and application of principles for defining critical groups and biospheres for deep geological repositories. One of the important and successful IAEA programmes in this field is the Biosphere Modelling and Assessment (BIOMASS) project

Quantifying the Metrics That Characterize Safety Culture of Three Engineered Systems

International Nuclear Information System (INIS)

Tucker, Julie; Ernesti, Mary; Tokuhiro, Akira

2002-01-01

With potential energy shortages and increasing electricity demand, the nuclear energy option is being reconsidered in the United States. Public opinion will have a considerable voice in policy decisions that will 'road-map' the future of nuclear energy in this country. This report is an extension of the last author's work on the 'safety culture' associated with three engineered systems (automobiles, commercial airplanes, and nuclear power plants) in Japan and the United States. Safety culture, in brief is defined as a specifically developed culture based on societal and individual interpretations of the balance of real, perceived, and imagined risks versus the benefits drawn from utilizing a given engineered systems. The method of analysis is a modified scale analysis, with two fundamental Eigen-metrics, time- (t) and number-scales (N) that describe both engineered systems and human factors. The scale analysis approach is appropriate because human perception of risk, perception of benefit and level of (technological) acceptance are inherently subjective, therefore 'fuzzy' and rarely quantifiable in exact magnitude. Perception of risk, expressed in terms of the psychometric factors 'dread risk' and 'unknown risk', contains both time- and number-scale elements. Various engineering system accidents with fatalities, reported by mass media are characterized by t and N, and are presented in this work using the scale analysis method. We contend that level of acceptance infers a perception of benefit at least two orders larger magnitude than perception of risk. The 'amplification' influence of mass media is also deduced as being 100- to 1000-fold the actual number of fatalities/serious injuries in a nuclear-related accident. (authors)

Safety culture indicators for NPP: international trends and development status in Korea

International Nuclear Information System (INIS)

Choi, Y. S.; Ko, J. D.; Choi, K. S.; Jung, Y. H.

2004-01-01

Safety culture has been recognized as important to achieve high level of nuclear safety, as several recent events that have occurred in advanced countries were found to have important implications for safety culture. Under the recognition, implementation-focused and practical methods to foster safety culture have become necessary. Development of safety culture indicators for assessing the level of safety culture and identifying some deficiencies is being conducted. This paper examines the regulatory positions of major nuclear power countries on licensee's safety culture, introduces the development status of Korean Safety Culture Indicators and presents its future direction

Nuclear power indices and safety

International Nuclear Information System (INIS)

Bennet, L.L.; Fizher, D.; Nechaev, A.

1987-01-01

Problems discussed at the IAEA International Conference on nuclear power indices and safety held in Vienna from 28 September to 2 October, 1987 are considered. Representatives from 40 countries and 12 international organizations participated in the conference. It is marked that by the end of this century nuclear power plant capacities in developing countries will increase by more than twice. In developed countries increase of installed capacity by 65 % is forecasted. It is stressed that competently constructed and operated NPPs will be successfully competing with coal-fueled power plants in the majority of the world regions. Much attention was paid to reports on measures taken after Chernobyl' accident and its radiation effects on people helth. It is shown that parallel with fundamental theoretical studies on NPP safety as a complex engineering system much attention is paid to some problems of designing and operation of such facilities. Fuel cycle problems, radioactive waste and spent fuel storage and disposal in particular, are considered

[An approach to care indicators benchmarking. Learning to improve patient safety].

Science.gov (United States)

de Andrés Gimeno, B; Salazar de la Guerra, R M; Ferrer Arnedo, C; Revuelta Zamorano, M; Ayuso Murillo, D; González Soria, J

2014-01-01

Improvements in clinical safety can be achieved by promoting a safety culture, professional training, and learning through benchmarking. The aim of this study was to identify areas for improvement after analysing the safety indicators in two public Hospitals in North-West Madrid Region. Descriptive study performed during 2011 in Hospital Universitario Puerta de Hierro Majadahonda (HUPHM) and Hospital de Guadarrama (HG). The variables under study were 40 indicators on nursing care related to patient safety. Nineteen of them were defined in the SENECA project as care quality standards in order to improve patient safety in the hospitals. The data collected were clinical history, Madrid Health Service assessment reports, care procedures, and direct observation Within the 40 indicators: 22 of them were structured (procedures), HUPHM had 86%, and HG 95% 14 process indicators (training and protocols compliance) with similar results in both hospitals, apart from the care continuity reports and training in hand hygiene. The 4 results indicators (pressure ulcer, falls and pain) showed different results. The analysis of the indicators allowed the following actions to be taken: to identify improvements to be made in each hospital, to develop joint safety recommendations in nursing care protocols in prevention and treatment of chronic wound, to establish systematic pain assessments, and to prepare continuity care reports on all patients transferred from HUPHM to HG. Copyright © 2013 SECA. Published by Elsevier Espana. All rights reserved.

Comparative assessment of safety indicators for vehicle trajectories on the highway

NARCIS (Netherlands)

Mullakkal Babu, F.A.; Wang, M.; Farah, H.; van Arem, B.; Happee, R.

2017-01-01

Safety measurement and analysis have been a challenging and well-researched topic in transportation. Conventionally, surrogate safety measures have been used as safety indicators in simulation models for safety assessment, in control formulations for driver assistance systems, and in data analysis

Identifying the most significant indicators of the total road safety performance index.

Science.gov (United States)

Tešić, Milan; Hermans, Elke; Lipovac, Krsto; Pešić, Dalibor

2018-04-01

The review of the national and international literature dealing with the assessment of the road safety level has shown great efforts of the authors who tried to define the methodology for calculating the composite road safety index on a territory (region, state, etc.). The procedure for obtaining a road safety composite index of an area has been largely harmonized. The question that has not been fully resolved yet concerns the selection of indicators. There is a wide range of road safety indicators used to show a road safety situation on a territory. Road safety performance index (RSPI) obtained on the basis of a larger number of safety performance indicators (SPIs) enable decision makers to more precisely define the earlier goal- oriented actions. However, recording a broader comprehensive set of SPIs helps identify the strengths and weaknesses of a country's road safety system. Providing high quality national and international databases that would include comparable SPIs seems to be difficult since a larger number of countries dispose of a small number of identical indicators available for use. Therefore, there is a need for calculating a road safety performance index with a limited number of indicators (RSPI ln n ) which will provide a comparison of a sufficient quality, of as many countries as possible. The application of the Data Envelopment Analysis (DEA) method and correlative analysis has helped to check if the RSPI ln n is likely to be of sufficient quality. A strong correlation between the RSPI ln n and the RSPI has been identified using the proposed methodology. Based on this, the most contributing indicators and methodologies for gradual monitoring of SPIs, have been defined for each country analyzed. The indicator monitoring phases in the analyzed countries have been defined in the following way: Phase 1- the indicators relating to alcohol, speed and protective systems; Phase 2- the indicators relating to roads and Phase 3- the indicators relating to

Plant safety and performance indicators for regulatory use

International Nuclear Information System (INIS)

Ferjancic, M.; Nemec, T.; Cimesa, S.

2004-01-01

Slovenian Nuclear Safety Administration (SNSA) supervises nuclear and radiological safety of Krsko NPP. This SNSA supervision is performed through inspections, safety evaluations of plant modifications and event analyses as well as with the safety and performance indicators (SPI) which are a valuable data source for plant safety monitoring. In the past SNSA relied on the SPI provided by Krsko NPP and did not have a set of SPI which would be more appropriate for regulatory use. In 2003 SNSA started with preparation of a new set of SPI which would be more suitable for performing the regulatory oversight of the plant. New internal SNSA procedure which is under preparation will define use and evaluation of SPI and will include definitions for the proposed set of SPI. According to the evaluation of SPI values in comparison with the limiting values and/or trending, the procedure will define SNSA response and actions. (author)

DEVELOPING SAFETY INDICATORS ON THE BASIS OF THE ICAO RECOMMENDATIONS

Directory of Open Access Journals (Sweden)

V. D. Sharov

2014-01-01

Full Text Available The article offers direct use of the recommendations of SMM ICAO Doc.9859, 3rd ed. 2013, for calculation the target and alert levels of safety indicators. Examples of calculation based on data of 2011 and monitoring of the current indicators during 2012 are presented. Safety indicators for airlines in terms of “numbers of incidents per 1000 flight hours” could be calculated on the basis of the state values through the «coefficient of conformity».

Global Surgery System Strengthening: It Is All About the Right Metrics.

Science.gov (United States)

Watters, David A; Guest, Glenn D; Tangi, Viliami; Shrime, Mark G; Meara, John G

2018-04-01

Progress in achieving "universal access to safe, affordable surgery, and anesthesia care when needed" is dependent on consensus not only about the key messages but also on what metrics should be used to set goals and measure progress. The Lancet Commission on Global Surgery not only achieved consensus on key messages but also recommended 6 key metrics to inform national surgical plans and monitor scale-up toward 2030. These metrics measure access to surgery, as well as its timeliness, safety, and affordability: (1) Two-hour access to the 3 Bellwether procedures (cesarean delivery, emergency laparotomy, and management of an open fracture); (2) Surgeon, Anesthetist, and Obstetrician workforce >20/100,000; (3) Surgical volume of 5000 procedures/100,000; (4) Reporting of perioperative mortality rate; and (5 and 6) Risk rates of catastrophic expenditure and impoverishment when requiring surgery. This article discusses the definition, validity, feasibility, relevance, and progress with each of these metrics. The authors share their experience of introducing the metrics in the Pacific and sub-Saharan Africa. We identify appropriate messages for each potential stakeholder-the patients, practitioners, providers (health services and hospitals), public (community), politicians, policymakers, and payers. We discuss progress toward the metrics being included in core indicator lists by the World Health Organization and the World Bank and how they have been, or may be, used to inform National Surgical Plans in low- and middle-income countries to scale-up the delivery of safe, affordable, and timely surgical and anesthesia care to all who need it.

Standardised metrics for global surgical surveillance.

Science.gov (United States)

Weiser, Thomas G; Makary, Martin A; Haynes, Alex B; Dziekan, Gerald; Berry, William R; Gawande, Atul A

2009-09-26

Public health surveillance relies on standardised metrics to evaluate disease burden and health system performance. Such metrics have not been developed for surgical services despite increasing volume, substantial cost, and high rates of death and disability associated with surgery. The Safe Surgery Saves Lives initiative of WHO's Patient Safety Programme has developed standardised public health metrics for surgical care that are applicable worldwide. We assembled an international panel of experts to develop and define metrics for measuring the magnitude and effect of surgical care in a population, while taking into account economic feasibility and practicability. This panel recommended six measures for assessing surgical services at a national level: number of operating rooms, number of operations, number of accredited surgeons, number of accredited anaesthesia professionals, day-of-surgery death ratio, and postoperative in-hospital death ratio. We assessed the feasibility of gathering such statistics at eight diverse hospitals in eight countries and incorporated them into the WHO Guidelines for Safe Surgery, in which methods for data collection, analysis, and reporting are outlined.

Design of an indicator for health and safety governance

OpenAIRE

Minguillón, Roberto F.; Yacuzzi, Enrique

2009-01-01

Occupational Health and Safety Governance (OHSG) is a branch of Corporate Governance by which the board directs and controls labor risks created by their own enterprise. The OHSG concept is relatively new; unlike Occupational Health and Safety Management, which is mostly related to the work of managerial ranks, OHSG deals with principles, the interests of stakeholders, and the work of directors. The paper defines the new concept, OHSG, develops an original health and safety indicator, and pre...

Selection of indicators for continuous monitoring of patient safety: recommendations of the project 'safety improvement for patients in Europe'

DEFF Research Database (Denmark)

Kristensen, Solvejg; Mainz, Jan; Bartels, Paul

2009-01-01

such as culture, infections, surgical complications, medication errors, obstetrics, falls and specific diagnostic areas. CONCLUSION: The patient safety indicators recommended present a set of possible measures of patient safety. One of the future perspectives of implementing patient safety indicators...... for systematic monitoring is that it will be possible to continuously estimate the prevalence and incidence of patient safety quality problems. The lesson learnt from quality improvement is that it will pay off in terms of improving patient safety....

New method for distance-based close following safety indicator.

Science.gov (United States)

Sharizli, A A; Rahizar, R; Karim, M R; Saifizul, A A

2015-01-01

The increase in the number of fatalities caused by road accidents involving heavy vehicles every year has raised the level of concern and awareness on road safety in developing countries like Malaysia. Changes in the vehicle dynamic characteristics such as gross vehicle weight, travel speed, and vehicle classification will affect a heavy vehicle's braking performance and its ability to stop safely in emergency situations. As such, the aim of this study is to establish a more realistic new distance-based safety indicator called the minimum safe distance gap (MSDG), which incorporates vehicle classification (VC), speed, and gross vehicle weight (GVW). Commercial multibody dynamics simulation software was used to generate braking distance data for various heavy vehicle classes under various loads and speeds. By applying nonlinear regression analysis to the simulation results, a mathematical expression of MSDG has been established. The results show that MSDG is dynamically changed according to GVW, VC, and speed. It is envisaged that this new distance-based safety indicator would provide a more realistic depiction of the real traffic situation for safety analysis.

Geographical indications, food safety, and sustainability: conflicts and synergies

Directory of Open Access Journals (Sweden)

David A. Wirth

2017-01-01

Full Text Available This paper examines the legal and policy relationships amongst international standards for GIs, food safety requirements, and voluntary claims related to a food’s attributes. The paper addresses those relationships within the context of international trade agreements protecting GIs, such as the 1994 TRIPS Agreement, the EU-Canada Comprehensive Economic and Trade Agreement (CETA, and the chapter on intellectual property and geographical indications in the Transatlantic Trade and Investment Partnership (TTIP currently under negotiation. Trade agreements also discipline food safety measures and non-GI indications of quality or safety such as “organic” and “GMO-free.” Accordingly, the paper also considers the extent to which international trade agreements such as the WTO Agreements on the Application of Sanitary and Phytosanitary Standards (SPS Agreement and Technical Barriers to Trade (TBT might interact with the analysis.

Safety and performance indicators for the assessment of long-term safety of deep geological disposal of radioactive waste

International Nuclear Information System (INIS)

Hugi, M.; Schneider, J.W.; Dorp, F. van; Zuidema, P.

2005-01-01

The evaluation of the ability to isolate radioactive waste and the assessment of the long-term safety of a deep geological repository is usually done in terms of the calculated dose and/or risk for an average individual of the population which is potentially most affected by the potential impacts of the repository. At present, various countries and international organisations are developing so-called complementary indicators to supplement such calculations. These indicators are called ''safety indicators'' if they refer to the safety of the whole repository system; if they address the isolation capability of individual system components or the whole system from a more technical perspective, they are called ''performance indicators''. The need for complementary indicators follows from the long time frames which characterise the safety assessment of a geological repository, and the corresponding uncertainty of the calculated radiation dose. The main reason for these uncertainties is associated with the uncertain long-term prognosis of the surface environment and the related human behaviour. (orig.)

Safety and performance indicators for repositories in salt and clay formations

International Nuclear Information System (INIS)

Wolf, Jens; Ruebel, Andre; Noseck, Ulrich; Becker, Dirk

2008-07-01

The GRS (Gesellschaft fuer Reaktorsicherheit) study aims to the identification of suitable indicators for repositories in salt and clay formation. It is not intended to compare the two formations with respect to the safe disposal of radioactive waste. A first set of safety and performance indicators for both host rocks has been derived on the basis of results of the SPIN project. Reference values for the safety indicators have been determined. The suitability of the indicators and their significance for different time frames Is demonstrated by means of deterministic model calculations and external parameter variations of previous studies. The safety indicators considered in the report are the effective dose rate (Sv/a), the radiotoxicity concentration in the biosphere water (Sv/m 3 ) and the radiotoxicity flux from the geosphere (overlying rock) (Sv/a). The performance indicators considered in the study are the radiotoxicity inventory in different compartments (S), radiotoxicity fluxes from compartments and the integrated radiotoxicity fluxes from compartments (Sv).

Background metric in supergravity theories

International Nuclear Information System (INIS)

Yoneya, T.

1978-01-01

In supergravity theories, we investigate the conformal anomaly of the path-integral determinant and the problem of fermion zero modes in the presence of a nontrivial background metric. Except in SO(3) -invariant supergravity, there are nonvanishing conformal anomalies. As a consequence, amplitudes around the nontrivial background metric contain unpredictable arbitrariness. The fermion zero modes which are explicitly constructed for the Euclidean Schwarzschild metric are interpreted as an indication of the supersymmetric multiplet structure of a black hole. The degree of degeneracy of a black hole is 2/sup 4n/ in SO(n) supergravity

Use of metrics in an effective ALARA program

International Nuclear Information System (INIS)

Bates, B.B. Jr.

1996-01-01

ALARA radiological protection programs require metrics to meet their objectives. Sources of metrics include external dosimetry; internal dosimetry; radiological occurrences from the occurrence reporting an processing system (ORPS); and radiological incident reports (RIR). The sources themselves contain an abundance of specific open-quotes indicators.close quotes To choose the site-specific indicators that will be tracked and trended requires careful review. Justification is needed to defend the indicators selected and maybe even stronger justification is needed for those indicators that are available, but not chosen as a metric. Historically, the many different sources of information resided in a plethora of locations. Even the same type of metric had data located in different areas and could not be easily totaled for the entire Site. This required the end user to expend valuable time and effort to locate the data they needed. To address this problem, a central metrics database has been developed so that a customer can have all their questions addressed quickly and correctly. The database was developed in the beginning to answer some of the customer's most frequently asked questions. IL is now also a tool to communicate the status of the radiation protection program to facility managers. Finally, it also addresses requirements contained in the Rad Con manual and the 10CFR835 implementation guides. The database uses currently available, open-quotes user friendly,close quotes software and contains information from RIR's, ORPS, and external dosimetry records specific to ALARA performance indicators. The database is expandable to allow new metrics input. Specific reports have been developed to assist customers in their tracking and trending of ALARA metrics. These include quarterly performance indicator reports, monthly radiological incident reports, monthly external dose history and goals tracking reports, and the future use of performance indexing

Effects of Metric Change on Safety in the Workplace for Selected Occupations.

Science.gov (United States)

1982-04-21

to undertake certain types of research regarding the effects of metric con - version. Under the leadership of its research couiittee, the U.S. Metric...Service. At this time there was a growing concern about conditions in the nation’s workplaces -- from Colorado mines to New York City sweatshops ...incidence of worker injury within each occupation was also con - sidered in order to eliminate those occupations that, although they are hazardous

Radiological impacts analysis with use of new endpoint as complementary safety indicators

International Nuclear Information System (INIS)

Peralta Vital, J.L.; Gil Castillo, R.; Fleitas Estevez, G.G.; Olivera Acosta, J.

2015-01-01

The paper shows the new safety indicators on risk assessment (safety assessment) to radioactive waste environmental management implementation (concentrations and fluxes of naturally occurring radioactive materials (NORM)). The endpoint obtained, allow the best analysis of the radiological impact associated to radioactive waste isolation system. The common safety indicators for safety assessment purpose, dose and risk, are very time dependent, increasing the uncertainties in the results for long term assessment. The complementary and new proposed endpoints are more stable and they are not affected by changes in the critical group, pathways, etc. The NORM values on facility site were obtained as result of national surveys, the natural concentrations of U, Ra, Th, K has been associated with the variation of the lithologies in 3 geographical areas of the Country (Occidental, Central and Oriental). The results obtained are related with the safety assessment topics and allowed to apply the new complementary safety indicators, by comparisons between the natural concentrations and fluxes on site and its calculated values for the conceptual repository design. In order to normalize the concentration results, the analysis was realized adopting the criteria of the Repository Equivalent Rock Volume (RERV). The preliminary comparison showed that the calculated concentrations and fluxes in the Cuban conceptual radioactive waste repository are not higher than the natural values in the host rock. According to the application of new safety indicators, the reference disposal facility does not increase the natural activity concentration and fluxes in the environment. In order to implement these new safety indicator it has been used the current 226 Ra inventory of the Repository and the 226 Ra as natural concentration on the site. (authors)

IT Project Management Metrics

Directory of Open Access Journals (Sweden)

2007-01-01

Full Text Available Many software and IT projects fail in completing theirs objectives because different causes of which the management of the projects has a high weight. In order to have successfully projects, lessons learned have to be used, historical data to be collected and metrics and indicators have to be computed and used to compare them with past projects and avoid failure to happen. This paper presents some metrics that can be used for the IT project management.

Mass Customization Measurements Metrics

DEFF Research Database (Denmark)

Nielsen, Kjeld; Brunø, Thomas Ditlev; Jørgensen, Kaj Asbjørn

2014-01-01

A recent survey has indicated that 17 % of companies have ceased mass customizing less than 1 year after initiating the effort. This paper presents measurement for a company’s mass customization performance, utilizing metrics within the three fundamental capabilities: robust process design, choice...... navigation, and solution space development. A mass customizer when assessing performance with these metrics can identify within which areas improvement would increase competitiveness the most and enable more efficient transition to mass customization....

Application of patient safety indicators internationally: a pilot study among seven countries.

Science.gov (United States)

Drösler, Saskia E; Klazinga, Niek S; Romano, Patrick S; Tancredi, Daniel J; Gogorcena Aoiz, Maria A; Hewitt, Moira C; Scobie, Sarah; Soop, Michael; Wen, Eugene; Quan, Hude; Ghali, William A; Mattke, Soeren; Kelley, Edward

2009-08-01

To explore the potential for international comparison of patient safety as part of the Health Care Quality Indicators project of the Organization for Economic Co-operation and Development (OECD) by evaluating patient safety indicators originally published by the US Agency for Healthcare Research and Quality (AHRQ). A retrospective cross-sectional study. Acute care hospitals in the USA, UK, Sweden, Spain, Germany, Canada and Australia in 2004 and 2005/2006. Routine hospitalization-related administrative data from seven countries were analyzed. Using algorithms adapted to the diagnosis and procedure coding systems in place in each country, authorities in each of the participating countries reported summaries of the distribution of hospital-level and overall (national) rates for each AHRQ Patient Safety Indicator to the OECD project secretariat. Each country's vector of national indicator rates and the vector of American patient safety indicators rates published by AHRQ (and re-estimated as part of this study) were highly correlated (0.821-0.966). However, there was substantial systematic variation in rates across countries. This pilot study reveals that AHRQ Patient Safety Indicators can be applied to international hospital data. However, the analyses suggest that certain indicators (e.g. 'birth trauma', 'complications of anesthesia') may be too unreliable for international comparisons. Data quality varies across countries; undercoding may be a systematic problem in some countries. Efforts at international harmonization of hospital discharge data sets as well as improved accuracy of documentation should facilitate future comparative analyses of routine databases.

Application of patient safety indicators internationally: a pilot study among seven countries

NARCIS (Netherlands)

Drösler, Saskia E.; Klazinga, Niek S.; Romano, Patrick S.; Tancredi, Daniel J.; Gogorcena Aoiz, Maria A.; Hewitt, Moira C.; Scobie, Sarah; Soop, Michael; Wen, Eugene; Quan, Hude; Ghali, William A.; Mattke, Soeren; Kelley, Edward

2009-01-01

To explore the potential for international comparison of patient safety as part of the Health Care Quality Indicators project of the Organization for Economic Co-operation and Development (OECD) by evaluating patient safety indicators originally published by the US Agency for Healthcare Research and

Operational safety system performance alternative to the WANO's indicator

International Nuclear Information System (INIS)

Lyra, Moacir

2002-01-01

One of the operational safety performance indicators recommended by the World Association of Nuclear Operators (WANO) and adopted by Electronuclear is the reliability of the safety systems. The parameter selected to represent this indicator is the average unavailability of the trains of the concerned system. This parameter would be universally representative of the reliability for comparison purpose only if all nuclear power plants were designed within the same redundancy criteria. Considering the diversity of design criteria of the power plants in operation and based on a probabilistic approach, this paper proposes new performance indicators which are comparable regardless the redundancy criteria of the system. A case example applied to a system of the Angra 2 nuclear power plant shows that, even though with the plant in the infancy phase, the performance of the system in the period is very good. (author)

Practical application of decision support metrics for power plant risk-informed asset management

International Nuclear Information System (INIS)

Liming, James K.; Johnson, David H.; Kee, Ernest J.; Sun, Alice Y.; Young, Garry G.

2003-01-01

The objective of this paper is to provide electric utilities with a concept for developing and applying effective decision support metrics via integrated risk-informed asset management (RIAM) programs for power stations and generating companies. RIAM is a process by which analysts review historical performance and develop predictive logic models and data analyses to predict critical decision support figures-of-merit (or metrics) for generating station managers and electric utility company executives. These metrics include, but are not limited to, the following; profitability, net benefit, benefit-to-cost ratio, projected return on investment, projected revenue, projected costs, asset value, safety (catastrophic facility damage frequency and consequences, etc.), power production availability (capacity factor, etc.), efficiency (heat rate), and others. RIAM applies probabilistic safety assessment (PSA) techniques and generates predictions probabilistically so that metrics information can be supplied to managers in terms of probability distributions as well as point estimates. This enables the managers to apply the concept of 'confidence levels' in their critical decision-making processes. (author)

A multiple decision support metrics method for effective risk-informed asset management

International Nuclear Information System (INIS)

Liming, J.K.; Salter, J.E.

2004-01-01

The objective of this paper is to provide electric utilities with a concept for developing and applying effective decision support metrics via integrated risk-informed asset management (RIAM) programs for power stations and generating companies. RIAM is a process by which analysts review historical performance and develop predictive logic models and data analyses to predict critical decision support figures-of-merit (or metrics) for generating station managers and electric utility company executives. These metrics include, but are not limited to, the following: profitability, net benefit, benefit-to-cost ratio, projected return on investment, projected revenue, projected costs, asset value, safety (catastrophic facility damage frequency and consequences, etc.), power production availability (capacity factor, etc.), efficiency (heat rate), and others. RIAM applies probabilistic safety assessment (PSA) techniques and generates predictions in a probabilistic way so that metrics information can be supplied to managers in terms of probability distributions as well as point estimates. This enables the managers to apply the concept of 'confidence levels' in their critical decision-making processes. (authors)

A newly developed dispersal metric indicates the succession of benthic invertebrates in restored rivers.

Science.gov (United States)

Li, Fengqing; Sundermann, Andrea; Stoll, Stefan; Haase, Peter

2016-11-01

Dispersal capacity plays a fundamental role in the riverine benthic invertebrate colonization of new habitats that emerges following flash floods or restoration. However, an appropriate measure of dispersal capacity for benthic invertebrates is still lacking. The dispersal of benthic invertebrates occurs mainly during the aquatic (larval) and aerial (adult) life stages, and the dispersal of each stage can be further subdivided into active and passive modes. Based on these four possible dispersal modes, we first developed a metric (which is very similar to the well-known and widely used saprobic index) to estimate the dispersal capacity for 802 benthic invertebrate taxa by incorporating a weight for each mode. Second, we tested this metric using benthic invertebrate community data from a) 23 large restored river sites with substantial improvements of river bottom habitats dating back 1 to 10years, b) 23 unrestored sites very close to the restored sites, and c) 298 adjacent surrounding sites (mean±standard deviation: 13.0±9.5 per site) within a distance of up to 5km for each restored site in the low mountain and lowland areas of Germany. We hypothesize that our metric will reflect the temporal succession process of benthic invertebrate communities colonizing the restored sites, whereas no temporal changes are expected in the unrestored and surrounding sites. By applying our metric to these three river treatment categories, we found that the average dispersal capacity of benthic invertebrate communities in the restored sites significantly decreased in the early years following restoration, whereas there were no changes in either the unrestored or the surrounding sites. After all taxa had been divided into quartiles representing weak to strong dispersers, this pattern became even more obvious; strong dispersers colonized the restored sites during the first year after restoration and then significantly decreased over time, whereas weak dispersers continued to increase

Indicators of Nuclear safety and exploitation in ANAV

International Nuclear Information System (INIS)

Quintana Prieto, M.; Jorda Alcove, M.

2013-01-01

The use of indicators by ANAV plants, aims to be a tool to facilitate the assessment of the behaviour of the plants nuclear over a specific time period. The following are and are they explain those related to Nuclear safety and exploitation.

Analysis of international approaches which are used at development of theoperational safety performance indicators

International Nuclear Information System (INIS)

Lyigots'kij, O.Yi.; Nosovs'kij, A.V.; Chemeris, Yi.O.

2009-01-01

Description of international approaches and experience of the use of theoperational safety performance indicators system is provided for estimationof current status and making a decision on corrections in the operationpractice. The state of development of the operational safety performanceindicators system by the operating organization is overviewed. Thepossibility of application of international approaches during development ofthe integral safety performance indicators system is analyzed. Aims and tasksof future researches are formulated in relation to development of theintegral safety performance indicators system.

The use of safety indicators in the assessment of radioactive waste disposal

International Nuclear Information System (INIS)

Wingefors, S.; Westerlind, M.; Gera, F.

1999-01-01

The most widely used criteria for disposal are limits or constraints on individual dose or risk, and these have been introduced in most national legal frameworks. There is general agreement that future generations have the right to the same level of protection as the current generation. Even if quantitative criteria corresponding to the required level of protection can be (and have been) defined, it is a great challenge to demonstrate compliance with these criteria. The difficulties are to large extent due to the long time-scales needed to be considered in radioactive waste disposal. The future cannot be predicted in detail but instead different scenarios, with different probabilities of occurrence, must be assessed. Some parts of a disposal system can be predicted or analysed with high confidence for very long periods of time, e.g. geological formations, while for example the evolution of the biosphere, and in particular the society, become quite uncertain within less than one thousand years. Thus, there may be considerable uncertainty in doses (or risks) derived from the safety assessment of a repository. Due to these unavoidable uncertainties it is believed advantageous to use multiple approaches in the safety assessment and to identify different indicators for the repository safety ('multiple-lines-of-reasoning'). The most fundamental safety indicators are dose/risk but complementary indicators have been suggested, in particular flux and environmental concentration of radionuclides. This presentation is focussed on fluxes and concentrations as complementary safety indicators. Other safety indicators, e.g. transfer times, are mentioned only briefly

Effective use of metrics in an ALARA program

International Nuclear Information System (INIS)

Bates, B.B. Jr.

1996-01-01

ALARA radiological protection programs require metrics to meet their objectives. Sources of metrics include; external dosimetry; internal dosimetry; radiological occurrences from the occurrence reporting and processing system (ORPS); and radiological incident reports (RIR). The sources themselves contain an abundance of specific ''indicators''. To choose the site-specific indicators that will be tracked and trended requires careful review. This required the end users to expend valuable time and effort to locate the data they needed. To address this problem, a central metrics database has been developed so that customers can have all their questions addressed quickly and correctly. The database was developed in the beginning to answer some of the customer's most frequently asked questions. It is now also a tool to communicate the status of the radiation protection program to facility managers. Finally it also addresses requirements contained in the Rad Con manual and the 10CFR835 implementation guides. The database uses currently available, ''user friendly'', software and contains information from RIR's, ORPS, and external dosimetry records specific to ALARA performance indicators. The database is expandable to allow new metrics input. Specific reports have been developed to assist customers in their tracking and trending of ALARA metrics

Neurosurgical virtual reality simulation metrics to assess psychomotor skills during brain tumor resection.

Science.gov (United States)

Azarnoush, Hamed; Alzhrani, Gmaan; Winkler-Schwartz, Alexander; Alotaibi, Fahad; Gelinas-Phaneuf, Nicholas; Pazos, Valérie; Choudhury, Nusrat; Fares, Jawad; DiRaddo, Robert; Del Maestro, Rolando F

2015-05-01

Virtual reality simulator technology together with novel metrics could advance our understanding of expert neurosurgical performance and modify and improve resident training and assessment. This pilot study introduces innovative metrics that can be measured by the state-of-the-art simulator to assess performance. Such metrics cannot be measured in an operating room and have not been used previously to assess performance. Three sets of performance metrics were assessed utilizing the NeuroTouch platform in six scenarios with simulated brain tumors having different visual and tactile characteristics. Tier 1 metrics included percentage of brain tumor resected and volume of simulated "normal" brain tissue removed. Tier 2 metrics included instrument tip path length, time taken to resect the brain tumor, pedal activation frequency, and sum of applied forces. Tier 3 metrics included sum of forces applied to different tumor regions and the force bandwidth derived from the force histogram. The results outlined are from a novice resident in the second year of training and an expert neurosurgeon. The three tiers of metrics obtained from the NeuroTouch simulator do encompass the wide variability of technical performance observed during novice/expert resections of simulated brain tumors and can be employed to quantify the safety, quality, and efficiency of technical performance during simulated brain tumor resection. Tier 3 metrics derived from force pyramids and force histograms may be particularly useful in assessing simulated brain tumor resections. Our pilot study demonstrates that the safety, quality, and efficiency of novice and expert operators can be measured using metrics derived from the NeuroTouch platform, helping to understand how specific operator performance is dependent on both psychomotor ability and cognitive input during multiple virtual reality brain tumor resections.

Development of soil quality metrics using mycorrhizal fungi

Energy Technology Data Exchange (ETDEWEB)

Baar, J.

2010-07-01

Based on the Treaty on Biological Diversity of Rio de Janeiro in 1992 for maintaining and increasing biodiversity, several countries have started programmes monitoring soil quality and the above- and below ground biodiversity. Within the European Union, policy makers are working on legislation for soil protection and management. Therefore, indicators are needed to monitor the status of the soils and these indicators reflecting the soil quality, can be integrated in working standards or soil quality metrics. Soil micro-organisms, particularly arbuscular mycorrhizal fungi (AMF), are indicative of soil changes. These soil fungi live in symbiosis with the great majority of plants and are sensitive to changes in the physico-chemical conditions of the soil. The aim of this study was to investigate whether AMF are reliable and sensitive indicators for disturbances in the soils and can be used for the development of soil quality metrics. Also, it was studied whether soil quality metrics based on AMF meet requirements to applicability by users and policy makers. Ecological criterions were set for the development of soil quality metrics for different soils. Multiple root samples containing AMF from various locations in The Netherlands were analyzed. The results of the analyses were related to the defined criterions. This resulted in two soil quality metrics, one for sandy soils and a second one for clay soils, with six different categories ranging from very bad to very good. These soil quality metrics meet the majority of requirements for applicability and are potentially useful for the development of legislations for the protection of soil quality. (Author) 23 refs.

THE ROLE OF ARTICLE LEVEL METRICS IN SCIENTIFIC PUBLISHING

Directory of Open Access Journals (Sweden)

Vladimir TRAJKOVSKI

2016-04-01

Full Text Available Emerging metrics based on article-level does not exclude traditional metrics based on citations to the journal, but complements them. Article-level metrics (ALMs provide a wide range of metrics about the uptake of an individual journal article by the scientific community after publication. They include citations, statistics of usage, discussions in online comments and social media, social bookmarking, and recommendations. In this editorial, the role of article level metrics in publishing scientific papers has been described. Article-Level Metrics (ALMs are rapidly emerging as important tools to quantify how individual articles are being discussed, shared, and used. Data sources depend on the tool, but they include classic metrics indicators depending on citations, academic social networks (Mendeley, CiteULike, Delicious and social media (Facebook, Twitter, blogs, and Youtube. The most popular tools used to apply this new metrics are: Public Library of Science - Article-Level Metrics, Altmetric, Impactstory and Plum Analytics. Journal Impact Factor (JIF does not consider impact or influence beyond citations count as this count reflected only through Thomson Reuters’ Web of Science® database. JIF provides indicator related to the journal, but not related to a published paper. Thus, altmetrics now becomes an alternative metrics for performance assessment of individual scientists and their contributed scholarly publications. Macedonian scholarly publishers have to work on implementing of article level metrics in their e-journals. It is the way to increase their visibility and impact in the world of science.

Numerical indicators of nuclear power plant safety performance

International Nuclear Information System (INIS)

1991-04-01

The workshop was attended by representatives from twenty-two Member States operating nuclear power plants (NPP). The current status of the development and use of numerical indicators of NPP safety performance was presented. A consensus on the benefits of use of numerical indicators was reached. The Technical Committee Meeting reviewed the progress in the development and use of performance indicators and identified them as the most appropriate ones for international use. The purpose of this document is to summarize the discussions held and conclusions reached in both meetings. Lists of participants and all the papers of both meetings are presented

Safety indicators for the safety assessment of radioactive waste disposal. Sixth report of the Working Group on Principles and Criteria for Radioactive Waste Disposal

International Nuclear Information System (INIS)

2003-09-01

The report describes a few indicators that are considered to be the most promising for assessing the long term safety of disposal systems. The safety indicators that are discussed here may be applicable to a range of disposal systems for different waste types, including near surface disposal facilities for low level waste. The appropriateness of the different indicators may, however, vary depending on the characteristics of the waste, the facility and the assessment context. The focus of the report is thus on the use of time-scales of containment and transport, and radionuclide concentrations and fluxes, as indicators of disposal system safety, that may complement the more usual safety indicators of dose and risk. Summarised are the broad elements that a safety case for an underground radioactive waste disposal facility should possess and the role and use of performance and safety indicators within these elements. An overview of performance and safety indicators is given. The use is discussed of dose and risk as safety indicators and, in particular, problems that can arise in their use. Also presented are some specific indicators that have the potential to be used as complementary safety indicators. Discussed is also how fluxes of naturally occurring elements and radionuclides due to the operation of natural processes such as erosion and groundwater discharge may be quantified for comparison with fluxes of waste derived contaminants

International survey of living PSA and safety indicators

International Nuclear Information System (INIS)

Holmberg, J.; Laakso, K.; Lehtinen, E.; Bjoere, S.

1992-01-01

The report contains an international overview of applications of living probabilistic assessment and development of operational safety indicators. Features of an ideal living PSA tool are summarized as well as a limited survey of code systems for managing a living probabilistic safety assessment (living PSA) is included. The international survey is used as an input for planning and performance of related tasks within the nordic NKS/SIK-1 project conducted in 1990-93. The research notes are distributed to the Nordic organizations involved or interested in the subject. The report includes an overview and conclusions from technical reports and articles available and presentations and discussions related to development and use of above methods for the evaluation and management of the operational safety of nuclear power plants. A large part of this material is based on material collected and discussed in connection to international specialist meetings relating to the subject

A Framework Based on a Systems Approach to Developing Safety Indicators in Fish Farming

Directory of Open Access Journals (Sweden)

Siri Mariane Holen

2018-05-01

Full Text Available The fish farming industry is one of the industries in Norway with the highest occupational fatality and injury rate. Despite the serious health, safety, and environmental issues in the industry, little is done to measure changes in safety over time beyond the traditional Lost Time Injury (LTI registrations. In this article the objective is twofold; (i to propose a framework for developing safety indicators based on Systems-Theoretic Process Analysis (STPA, and (ii to apply the framework to find indicators relevant for hazards in operations where subcontractors participate. STPA uses a hierarchical portrayal of the system in focus, in contrast to sequential models, and views safety as a control problem. It is believed that a systemic approach to indicator development better captures the complex safety challenges in aquaculture. Thirteen indicators are identified within areas such as maintenance, training, and planning. The indicators identified may function as a basis for decisions and actions that must be undertaken to ensure safe operations.

Measures of agreement between computation and experiment:validation metrics.

Energy Technology Data Exchange (ETDEWEB)

Barone, Matthew Franklin; Oberkampf, William Louis

2005-08-01

With the increasing role of computational modeling in engineering design, performance estimation, and safety assessment, improved methods are needed for comparing computational results and experimental measurements. Traditional methods of graphically comparing computational and experimental results, though valuable, are essentially qualitative. Computable measures are needed that can quantitatively compare computational and experimental results over a range of input, or control, variables and sharpen assessment of computational accuracy. This type of measure has been recently referred to as a validation metric. We discuss various features that we believe should be incorporated in a validation metric and also features that should be excluded. We develop a new validation metric that is based on the statistical concept of confidence intervals. Using this fundamental concept, we construct two specific metrics: one that requires interpolation of experimental data and one that requires regression (curve fitting) of experimental data. We apply the metrics to three example problems: thermal decomposition of a polyurethane foam, a turbulent buoyant plume of helium, and compressibility effects on the growth rate of a turbulent free-shear layer. We discuss how the present metrics are easily interpretable for assessing computational model accuracy, as well as the impact of experimental measurement uncertainty on the accuracy assessment.

Comparison of Country Risk, Sustainability and Economic Safety Indices

Directory of Open Access Journals (Sweden)

Jelena Stankeviciene

2014-03-01

Full Text Available Country risk, sustainability an economic safety are becoming more important in the contemporary economic world. The aim of this paper is to present the importance of comparison formalisation of country risk, sustainability, and economic safety indices for strategic alignment. The work provides an analysis on the relationship between country risk, sustainability an economic safety in EU countries, based on statistical data. Investigations and calculations of rankings provided by Euromoney Country Risk Index, European Economic Sustainability Index as well as for Economic Security Index were made and the results of EU country ranking based on three criteria were provided. Furthermore, the data for the Baltic States was summarised and the corresponding index of consistency for random judgments was evaluated.

Indicators for monitoring of safety operation and condition of nuclear power stations

International Nuclear Information System (INIS)

Manova, D.

2001-01-01

A common goal of all employees in the nuclear power field is safety operation of nuclear power stations. The evaluation and control of NPP safety operation are a part of the elements of safety management. The present report is related only to a part of the total assessment and control of the plant safety operation, namely - the indicator system for monitoring of Kozloduy NPP operation and condition. (author)

A generalized framework for assessment of safety margins in nuclear power plants

International Nuclear Information System (INIS)

Gavrilas, M.; Youngblood, B.; Prelewicz, D.; Meyer, Jim

2004-01-01

The protection of public health and safety, and the environment from inadvertent releases of radioactive materials from nuclear power plants relies on the implementation of the defense-in-depth strategy. The term defense-in-depth evolved historically, and thus its application has not always been uniform. The use of the term in the context of the U.S. Nuclear Regulatory Commission (NRC) safety philosophy entails the reliance of a nuclear facility on successive compensatory measures in preventing accidents or mitigating damage caused by malfunctions, accidents, or naturally occurring events. The introduction of probabilistic risk analyses with NUREG-74/014 and subsequent evolution in risk assessment techniques, are leading to the implementation of risk informed regulation to ensure the safety of the public and the environment. Risk informed regulation minimizes the likelihood of overlooking potentially significant accident sequences while limiting unnecessary burdens imposed on licensees. The proposed framework merges fundamental elements of safety regulation: defense-in depth, safety margins and probabilistic risk. It formalizes the relationship between probabilistic risk assessment (PRA) methods and data, and deterministic analyses in a manner consistent with NRC's defense-in-depth philosophy. Succinctly put, the likelihood and consequences of accident scenarios are considered simultaneously and quantified by a plant safety metric. The integration of these fundamental elements into a practically applicable safety framework is consistent with the NRC policy statement on use of probabilistic risk assessment methods and the November 2002 Regulatory Guide on risk informed decisions on plant-specific changes to the licensing basis. Safety information resulting from the application of the framework supersedes traditional safety figures of merit. Safety quantifiers, referred herein as safety indices, expand on the qualifier outcomes that currently accompany fault tree

Large curvature and background scale independence in single-metric approximations to asymptotic safety

Energy Technology Data Exchange (ETDEWEB)

Morris, Tim R. [STAG Research Centre & Department of Physics and Astronomy, University of Southampton,Highfield, Southampton, SO17 1BJ (United Kingdom)

2016-11-25

In single-metric approximations to the exact renormalization group (RG) for quantum gravity, it has been not been clear how to treat the large curvature domain beyond the point where the effective cutoff scale k is less than the lowest eigenvalue of the appropriate modified Laplacian. We explain why this puzzle arises from background dependence, resulting in Wilsonian RG concepts being inapplicable. We show that when properly formulated over an ensemble of backgrounds, the Wilsonian RG can be restored. This in turn implies that solutions should be smooth and well defined no matter how large the curvature is taken. Even for the standard single-metric type approximation schemes, this construction can be rigorously derived by imposing a modified Ward identity (mWI) corresponding to rescaling the background metric by a constant factor. However compatibility in this approximation requires the space-time dimension to be six. Solving the mWI and flow equation simultaneously, new variables are then derived that are independent of overall background scale.

Bringing structure into road safety evaluation: a hierarchy of indicators

OpenAIRE

HERMANS, Elke; BRIJS, Tom; WETS, Geert; SHEN, Yongjun

2010-01-01

In recent years, there has been an explosion of interest in indicators in several domains. This reflects growing recognition of the important role indicators can play as a tool for enhancing the quality of decision making. Indicators express an aspect of a phenomenon in an understandable and relevant way and are useful in terms of monitoring, evaluation and communication. Like other policies, road safety policy could benefit from the use of indicators able to measure changes and progress towa...

Bringing structure into road safety evaluation: a hierarchy of indicators

OpenAIRE

HERMANS, Elke; BRIJS, Tom; WETS, Geert

2010-01-01

In recent years, there has been an explosion of interest in indicators in several domains. This reflects growing recognition of the important role indicators can play as a tool for enhancing the quality of decision making. Indicators express an aspect of a phenomenom in an understandable and relevant way and are useful in terms of monitoring, evaluation and communication. Like other policies, road safety policy could benefit from the use of indicators able to measure changes and progress towa...

Optimal safety levels via social indicators

International Nuclear Information System (INIS)

Lind, N.C.; Nathwani, J.S.

1992-01-01

In the management of natural or technological hazards in a society, the objective should be to serve the public interest in a rational manner. Decisions with regard to risk levels for the public - if they are to be defensible and self-consistent - require an integrated system of values that covers the entire range of hazards under public regulation. The process for setting risk levels (or safety goals) should ideally involve a thorough consideration of cost and benefit of all kinds, supported by explicit quantified comparison on a widely acceptable scale. The purpose of the paper is to show how quantitative criteria within the context of an appropriate framework can be used to guide risk management decisions. Social indicators are time series, statistics that reflect some aspect of the quality of life in a society or group of individuals. Development, validation, and use of social indicators is an important current research activity, as exemplified by journals such as Social Indicators Research. The basic objective is to provide quantitative measures for assessing the rationales and effectiveness of public decision-making. The concept is applicable to the nuclear industry

A study of leading indicators for occupational health and safety management systems in healthcare.

Science.gov (United States)

Almost, Joan M; VanDenKerkhof, Elizabeth G; Strahlendorf, Peter; Caicco Tett, Louise; Noonan, Joanna; Hayes, Thomas; Van Hulle, Henrietta; Adam, Ryan; Holden, Jeremy; Kent-Hillis, Tracy; McDonald, Mike; Paré, Geneviève C; Lachhar, Karanjit; Silva E Silva, Vanessa

2018-04-23

In Ontario, Canada, approximately $2.5 billion is spent yearly on occupational injuries in the healthcare sector. The healthcare sector has been ranked second highest for lost-time injury rates among 16 Ontario sectors since 2009 with female healthcare workers ranked the highest among all occupations for lost-time claims. There is a great deal of focus in Ontario's occupational health and safety system on compliance and fines, however despite this increased focus, the injury statistics are not significantly improving. One of the keys to changing this trend is the development of a culture of healthy and safe workplaces including the effective utilization of leading indicators within Occupational Health and Safety Management Systems (OHSMSs). In contrast to lagging indicators, which focus on outcomes retrospectively, a leading indicator is associated with proactive activities and consists of selected OHSMSs program elements. Using leading indicators to measure health and safety has been common practice in high-risk industries; however, this shift has not occurred in healthcare. The aim of this project is to conduct a longitudinal study implementing six elements of the Ontario Safety Association for Community and Healthcare (OSACH) system identified as leading indicators and evaluating the effectiveness of this intervention on improving selected health and safety workplace indicators. A quasi-experimental longitudinal research design will be used within two Ontario acute care hospitals. The first phase of the study will focus on assessing current OHSMSs using the leading indicators, determining potential facilitators and barriers to changing current OHSMSs, and identifying the leading indicators that could be added or changed to the existing OHSMS in place. Phase I will conclude with the development of an intervention designed to support optimizing current OHSMSs in participating hospitals based on identified gaps. Phase II will pilot test and evaluate the tailored

Proceedings of the specialist meeting on safety performance indicators

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-05-28

In 1998, the OECD/NEA committee on Nuclear Regulatory Activities (CNRA) initiated an activity with the objective of advancing the discussion on how to enhance and measure regulatory effectiveness in relation to nuclear installations. One of the outcome of this activity was to establish a Task group to develop internal (direct) performance indicators which would be used to monitor regulatory efficiency. On the initiative of the NEA/CSNI Working Group on Operating Experience the Spanish CSN hosted a workshop (Madrid, 2000) to review the state of the art on Safety Performance Indicators. This workshop, which was co-sponsored by the IAEA and WANO was attended by 73 participants from 19 countries, representing the industry, regulators, service companies as well as international organisations. The conclusions were: 1. there is considerable development effort on performance indicators in many countries; 2. utilities continue to rely on the WANO Performance indicators system which consists of indicators in 8 key areas and receives data from virtually all commercial NPP's in the world; 3. Regulators do not have a common set of performance indicators. This document gathers the 25 presentations given during this workshop. After this workshop, a joint CNRA/CSNI task group was launched in December 2000 to exchange information and develop external (indirect) indicators to measure regulatory effectiveness, i.e. impact on licensee's safety performance. These external indicators are, in other words, the traditional plant performance indicators (PI's). The task force consisted of regulators, organisations which have a performance indicators system in operation or under testing. The task force met in Paris on February 19-20, 2001 and the work performed by the group is summarized in a report (NEA-CSNI-R--2001-11) attached in appendix to these proceedings.

Proceedings of the specialist meeting on safety performance indicators

International Nuclear Information System (INIS)

2002-01-01

In 1998, the OECD/NEA committee on Nuclear Regulatory Activities (CNRA) initiated an activity with the objective of advancing the discussion on how to enhance and measure regulatory effectiveness in relation to nuclear installations. One of the outcome of this activity was to establish a Task group to develop internal (direct) performance indicators which would be used to monitor regulatory efficiency. On the initiative of the NEA/CSNI Working Group on Operating Experience the Spanish CSN hosted a workshop (Madrid, 2000) to review the state of the art on Safety Performance Indicators. This workshop, which was co-sponsored by the IAEA and WANO was attended by 73 participants from 19 countries, representing the industry, regulators, service companies as well as international organisations. The conclusions were: 1. there is considerable development effort on performance indicators in many countries; 2. utilities continue to rely on the WANO Performance indicators system which consists of indicators in 8 key areas and receives data from virtually all commercial NPP's in the world; 3. Regulators do not have a common set of performance indicators. This document gathers the 25 presentations given during this workshop. After this workshop, a joint CNRA/CSNI task group was launched in December 2000 to exchange information and develop external (indirect) indicators to measure regulatory effectiveness, i.e. impact on licensee's safety performance. These external indicators are, in other words, the traditional plant performance indicators (PI's). The task force consisted of regulators, organisations which have a performance indicators system in operation or under testing. The task force met in Paris on February 19-20, 2001 and the work performed by the group is summarized in a report (NEA-CSNI-R--2001-11) attached in appendix to these proceedings

Application of patient safety indicators internationally: a pilot study among seven countries

OpenAIRE

Drösler, Saskia E.; Klazinga, Niek S.; Romano, Patrick S.; Tancredi, Daniel J.; Gogorcena Aoiz, Maria A.; Hewitt, Moira C.; Scobie, Sarah; Soop, Michael; Wen, Eugene; Quan, Hude; Ghali, William A.; Mattke, Soeren; Kelley, Edward

2017-01-01

Objective To explore the potential for international comparison of patient safety as part of the Health Care Quality Indicators project of the Organization for Economic Co-operation and Development (OECD) by evaluating patient safety indicators originally published by the US Agency for Healthcare Research and Quality (AHRQ). Design A retrospective cross-sectional study. Setting Acute care hospitals in the USA, UK, Sweden, Spain, Germany, Canada and Australia in 2004 and 2005/2006. Data source...

Artificial neural network model for prediction of safety performance indicators goals in nuclear plants

Energy Technology Data Exchange (ETDEWEB)

Souto, Kelling C.; Nunes, Wallace W. [Instituto Federal de Educacao, Ciencia e Tecnologia do Rio de Janeiro, Nilopolis, RJ (Brazil). Lab. de Aplicacoes Computacionais; Machado, Marcelo D., E-mail: dornemd@eletronuclear.gov.b [ELETROBRAS Termonuclear S.A. (ELETRONUCLEAR), Rio de Janeiro, RJ (Brazil). Gerencia de Combustivel Nuclear - GCN.T

2011-07-01

Safety performance indicators have been developed to provide a quantitative indication of the performance and safety in various industry sectors. These indexes can provide assess to aspects ranging from production, design, and human performance up to management issues in accordance with policy, objectives and goals of the company. The use of safety performance indicators in nuclear power plants around the world is a reality. However, it is necessary to periodically set goal values. Such goals are targets relating to each of the indicators to be achieved by the plant over a predetermined period of operation. The current process of defining these goals is carried out by experts in a subjective way, based on actual data from the plant, and comparison with global indices. Artificial neural networks are computational techniques that present a mathematical model inspired by the neural structure of intelligent organisms that acquire knowledge through experience. This paper proposes an artificial neural network model aimed at predicting values of goals to be used in the evaluation of safety performance indicators for nuclear power plants. (author)

Artificial neural network model for prediction of safety performance indicators goals in nuclear plants

International Nuclear Information System (INIS)

Souto, Kelling C.; Nunes, Wallace W.; Machado, Marcelo D.

2011-01-01

Safety performance indicators have been developed to provide a quantitative indication of the performance and safety in various industry sectors. These indexes can provide assess to aspects ranging from production, design, and human performance up to management issues in accordance with policy, objectives and goals of the company. The use of safety performance indicators in nuclear power plants around the world is a reality. However, it is necessary to periodically set goal values. Such goals are targets relating to each of the indicators to be achieved by the plant over a predetermined period of operation. The current process of defining these goals is carried out by experts in a subjective way, based on actual data from the plant, and comparison with global indices. Artificial neural networks are computational techniques that present a mathematical model inspired by the neural structure of intelligent organisms that acquire knowledge through experience. This paper proposes an artificial neural network model aimed at predicting values of goals to be used in the evaluation of safety performance indicators for nuclear power plants. (author)

Leading safety performance indicators for resilience assessment of radiopharmaceuticals production process

International Nuclear Information System (INIS)

Grecco, Claudio H.S.; Santos, Isaac J.A.L.; Carvalho, Paulo V.R.

2011-01-01

Radiopharmaceuticals are radiation-emitting substances used in medicine for radiotherapy and imaging diagnosis. A Research Institute, located in Rio de Janeiro, produces three radiopharmaceuticals: the sodium iodate is used in the diagnosis of thyroid dysfunctions, the meta-iodo-benzyl guanidine is used in the diagnosis of cardiac diseases, and the fluorodeoxyglucose is used in diagnosis in cardiology, oncology, neurology and neuro psychiatry. This paper presents a leading safety performance indicators framework to assess the resilience of radiopharmaceuticals production processes. The organizations that use resilience indicators will be able to pro actively evaluate and manage safety. (author)

Leading safety performance indicators for resilience assessment of radiopharmaceuticals production process

Energy Technology Data Exchange (ETDEWEB)

Grecco, Claudio H.S.; Santos, Isaac J.A.L.; Carvalho, Paulo V.R., E-mail: grecco@ien.gov.b, E-mail: luquetti@ien.gov.b, E-mail: paulov@ien.gov.b [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Div. de Instrumentacao e Confiabilidade Humana; Vidal, Mario C.R., E-mail: mvidal@ergonomia.ufrj.b [Coordenacao dos Programas de Pos-Graduacao de Engenharia (PEP/COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia de Producao. Grupo de Ergonomia e Novas Tecnologias (GENTE)

2011-07-01

Radiopharmaceuticals are radiation-emitting substances used in medicine for radiotherapy and imaging diagnosis. A Research Institute, located in Rio de Janeiro, produces three radiopharmaceuticals: the sodium iodate is used in the diagnosis of thyroid dysfunctions, the meta-iodo-benzyl guanidine is used in the diagnosis of cardiac diseases, and the fluorodeoxyglucose is used in diagnosis in cardiology, oncology, neurology and neuro psychiatry. This paper presents a leading safety performance indicators framework to assess the resilience of radiopharmaceuticals production processes. The organizations that use resilience indicators will be able to pro actively evaluate and manage safety. (author)

Sensitivity analysis of model output - a step towards robust safety indicators?

International Nuclear Information System (INIS)

Broed, R.; Pereira, A.; Moberg, L.

2004-01-01

The protection of the environment from ionising radiation challenges the radioecological community with the issue of harmonising disparate safety indicators. These indicators should preferably cover the whole spectrum of model predictions on chemo-toxic and radiation impact of contaminants. In question is not only the protection of man and biota but also of abiotic systems. In many cases modelling will constitute the basis for an evaluation of potential impact. It is recognised that uncertainty and sensitivity analysis of model output will play an important role in the 'construction' of safety indicators that are robust, reliable and easy to explain to all groups of stakeholders including the general public. However, environmental models of transport of radionuclides have some extreme characteristics. They are, a) complex, b) non-linear, c) include a huge number of input parameters, d) input parameters are associated with large or very large uncertainties, e) parameters are often correlated to each other, f) uncertainties other than parameter-driven may be present in the modelling system, g) space variability and time-dependence of parameters are present, h) model predictions may cover geological time scales. Consequently, uncertainty and sensitivity analysis are non-trivial tasks, challenging the decision-maker when it comes to the interpretation of safety indicators or the application of regulatory criteria. In this work we use the IAEA model ISAM, to make a set of Monte Carlo calculations. The ISAM model includes several nuclides and decay chains, many compartments and variable parameters covering the range of nuclide migration pathways from the near field to the biosphere. The goal of our calculations is to make a global sensitivity analysis. After extracting the non-influential parameters, the M.C. calculations are repeated with those parameters frozen. Reducing the number of parameters to a few ones will simplify the interpretation of the results and the use

Sharp metric obstructions for quasi-Einstein metrics

Science.gov (United States)

Case, Jeffrey S.

2013-02-01

Using the tractor calculus to study smooth metric measure spaces, we adapt results of Gover and Nurowski to give sharp metric obstructions to the existence of quasi-Einstein metrics on suitably generic manifolds. We do this by introducing an analogue of the Weyl tractor W to the setting of smooth metric measure spaces. The obstructions we obtain can be realized as tensorial invariants which are polynomial in the Riemann curvature tensor and its divergence. By taking suitable limits of their tensorial forms, we then find obstructions to the existence of static potentials, generalizing to higher dimensions a result of Bartnik and Tod, and to the existence of potentials for gradient Ricci solitons.

Landscape pattern metrics and regional assessment

Science.gov (United States)

O'Neill, R. V.; Riitters, K.H.; Wickham, J.D.; Jones, K.B.

1999-01-01

The combination of remote imagery data, geographic information systems software, and landscape ecology theory provides a unique basis for monitoring and assessing large-scale ecological systems. The unique feature of the work has been the need to develop and interpret quantitative measures of spatial pattern-the landscape indices. This article reviews what is known about the statistical properties of these pattern metrics and suggests some additional metrics based on island biogeography, percolation theory, hierarchy theory, and economic geography. Assessment applications of this approach have required interpreting the pattern metrics in terms of specific environmental endpoints, such as wildlife and water quality, and research into how to represent synergystic effects of many overlapping sources of stress.

En route to Background Independence: Broken split-symmetry, and how to restore it with bi-metric average actions

International Nuclear Information System (INIS)

Becker, D.; Reuter, M.

2014-01-01

The most momentous requirement a quantum theory of gravity must satisfy is Background Independence, necessitating in particular an ab initio derivation of the arena all non-gravitational physics takes place in, namely spacetime. Using the background field technique, this requirement translates into the condition of an unbroken split-symmetry connecting the (quantized) metric fluctuations to the (classical) background metric. If the regularization scheme used violates split-symmetry during the quantization process it is mandatory to restore it in the end at the level of observable physics. In this paper we present a detailed investigation of split-symmetry breaking and restoration within the Effective Average Action (EAA) approach to Quantum Einstein Gravity (QEG) with a special emphasis on the Asymptotic Safety conjecture. In particular we demonstrate for the first time in a non-trivial setting that the two key requirements of Background Independence and Asymptotic Safety can be satisfied simultaneously. Carefully disentangling fluctuation and background fields, we employ a ‘bi-metric’ ansatz for the EAA and project the flow generated by its functional renormalization group equation on a truncated theory space spanned by two separate Einstein–Hilbert actions for the dynamical and the background metric, respectively. A new powerful method is used to derive the corresponding renormalization group (RG) equations for the Newton- and cosmological constant, both in the dynamical and the background sector. We classify and analyze their solutions in detail, determine their fixed point structure, and identify an attractor mechanism which turns out instrumental in the split-symmetry restoration. We show that there exists a subset of RG trajectories which are both asymptotically safe and split-symmetry restoring: In the ultraviolet they emanate from a non-Gaussian fixed point, and in the infrared they loose all symmetry violating contributions inflicted on them by the

$\\eta$-metric structures

OpenAIRE

Gaba, Yaé Ulrich

2017-01-01

In this paper, we discuss recent results about generalized metric spaces and fixed point theory. We introduce the notion of $\\eta$-cone metric spaces, give some topological properties and prove some fixed point theorems for contractive type maps on these spaces. In particular we show that theses $\\eta$-cone metric spaces are natural generalizations of both cone metric spaces and metric type spaces.

IDENTIFYING MARKETING EFFECTIVENESS METRICS (Case study: East Azerbaijan`s industrial units)

OpenAIRE

Faridyahyaie, Reza; Faryabi, Mohammad; Bodaghi Khajeh Noubar, Hossein

2012-01-01

The Paper attempts to identify marketing eff ectiveness metrics in industrial units. The metrics investigated in this study are completely applicable and comprehensive, and consequently they can evaluate marketing eff ectiveness in various industries. The metrics studied include: Market Share, Profitability, Sales Growth, Customer Numbers, Customer Satisfaction and Customer Loyalty. The findings indicate that these six metrics are impressive when measuring marketing effectiveness. Data was ge...

Study on the operational safety performance indicator of nuclear power plants in China

International Nuclear Information System (INIS)

Zhou Shirong

2005-01-01

The operational Safety Performance Indicator system (SPI) has been more and more regarded recently for their clear and effective characteristic in safety assessment for Nuclear Power Plants (NPPs). A large developing plan for NPPs construction is being discussed and considered in P.R. China. As one of important nuclear country, China expects to ensure the normal operation of NPPs and improve the safety level. National Nuclear Safety Administration (NNSA), National Nuclear Regulatory Agency of China, has put high attention on safety and SPI area, and many endeavours and attempts have been done or being carried out for an establishment of SPI system in China. NNSA intends to build an integrated SPI system to monitor all of the NPPs operation in China, based on the SPI system currently used in the world. NNSA believes that the SPI system will help to more effectively enforce the function of surveillance and management. The paper will introduces the status of study on the operational safety performance indicator of Nuclear Power Plants in China. (author)

Use of different exposure metrics for understanding multi-modal travel injury risk

Directory of Open Access Journals (Sweden)

S. Ilgin Guler

2016-08-01

Full Text Available The objective of this work is to identify characteristics of different metrics of exposure for quantifying multi-modal travel injury risk. First, a discussion on the use of time-based and trip-based metrics for road user exposure to injury risk, considering multiple travel modes, is presented. The main difference between a time-based and trip-based metric is argued to be that a time-based metric reflects the actual duration of time spent on the road exposed to the travel risks. This can be proven to be important when considering multiple modes since different modes typically different speeds and average travel distances. Next, the use of total number of trips, total time traveled, and mode share (time-based or trip-based is considered to compare the injury risk of a given mode at different locations. It is argued that using mode share the safety concept which focuses on absolute numbers can be generalized. Quantitative results are also obtained from combining travel survey data with police collision reports for ten counties in California. The data are aggregated for five modes: (i cars, (ii SUVs, (iii transit riders, (iv bicyclists, and (v pedestrians. These aggregated data are used to compare travel risk of different modes with time-based or trip-based exposure metrics. These quantitative results confirm the initial qualitative discussions. As the penetration of mobile probes for transportation data collection increases, the insights of this study can provide guidance on how to best utilize the added value of such data to better quantify travel injury risk, and improve safety.

What safety indicators for a storage in deep geologic deposit?

International Nuclear Information System (INIS)

Crouail, P.; Schneider, T.; Mure, J.M.; Voinis, S.

1999-01-01

Indicators must allow to discriminate and compare different options of facility conception and help the decision-makers in their choices. In the case of a deep storage, these indicators can also allow a comparison in terms of impact with other existing industrial systems (thermal or nuclear power plants, uranium ores) or even the natural radioactivity. Through Swedish and Canadian examples, the presentation makes an inventory of indicators that could be kept in a safety analysis of a deep storage. (N.C.)

The value of safety indicators

NARCIS (Netherlands)

Kampen, J. van; Beek, B.D. van der; Groeneweg, J.

2013-01-01

Organisations are looking for ways to gain insight into the level of safety in their company so that additional measures can be taken when necessary and the effectiveness of interventions can be measured. That said, measuring safety, health and the environment is not easy. A survey among members of

The value of safety indicators

NARCIS (Netherlands)

Kampen, J. van; Beek, D. van der; Groeneweg, J.

2014-01-01

Organizations are searching for ways to gain insight into the level of safety in their company so that additional measures can be taken when necessary, and so the effectiveness of interventions can be measured. That said, measuring safety, health, and the environment is not easy. A survey among

Assessment of six dissimilarity metrics for climate analogues

Science.gov (United States)

Grenier, Patrick; Parent, Annie-Claude; Huard, David; Anctil, François; Chaumont, Diane

2013-04-01

Spatial analogue techniques consist in identifying locations whose recent-past climate is similar in some aspects to the future climate anticipated at a reference location. When identifying analogues, one key step is the quantification of the dissimilarity between two climates separated in time and space, which involves the choice of a metric. In this communication, spatial analogues and their usefulness are briefly discussed. Next, six metrics are presented (the standardized Euclidean distance, the Kolmogorov-Smirnov statistic, the nearest-neighbor distance, the Zech-Aslan energy statistic, the Friedman-Rafsky runs statistic and the Kullback-Leibler divergence), along with a set of criteria used for their assessment. The related case study involves the use of numerical simulations performed with the Canadian Regional Climate Model (CRCM-v4.2.3), from which three annual indicators (total precipitation, heating degree-days and cooling degree-days) are calculated over 30-year periods (1971-2000 and 2041-2070). Results indicate that the six metrics identify comparable analogue regions at a relatively large scale, but best analogues may differ substantially. For best analogues, it is also shown that the uncertainty stemming from the metric choice does generally not exceed that stemming from the simulation or model choice. A synthesis of the advantages and drawbacks of each metric is finally presented, in which the Zech-Aslan energy statistic stands out as the most recommended metric for analogue studies, whereas the Friedman-Rafsky runs statistic is the least recommended, based on this case study.

A chief safety officer as the driver and guardian of a great safety rating.

Science.gov (United States)

Steck, Oliver; Zenker, Daniel; Beatty, Tom

2013-02-01

If the Pharmaceutical Industry were to align to broad metrics that objectively state each product's "Safety Rating" two things would happen. First, Life Sciences companies would refocus dramatically on safety (followed by outcomes). Second, companies that have the highest aggregate "Safety Rating" would enjoy a significant competitive advantage. To achieve and maintain a high safety rating, the role of Safety officer needs to be elevated to the C-Suite.

The Role of Geographical Indication in Supporting Food Safety: A not Taken for Granted Nexus

Science.gov (United States)

2014-01-01

The paper focuses on the role of geographical indication in supporting strategies of food safety. Starting from the distinction between generic and specific quality, the article analyses the main factors influencing food safety in cases of geographical indication products, by stressing the importance of traceability systems and biodiversity in securing generic and specific quality. In the second part, the paper investigates the coordination problems behind a designation of origin and conditions to foster an effective collective action, a prerequisite to grant food safety through geographical indications. PMID:27800417

AN ANALYSIS OF ACCIDENT TRENDS AND MODELING OF SAFETY INDICES IN AN INDIAN CONSTRUCTION ORGANIZATION

Directory of Open Access Journals (Sweden)

Sunku Venkata Siva Rajaprasad

2016-09-01

Full Text Available Construction industry has been recognized as a hazardous industry in many countries due to distinct nature of execution of works.The accident rate in construction sector is high all over the world due to dynamic nature of work activities. Occurrence of accidents and its severity in construction industry is several times higher than the manufacturing industries. The study was limited to a major construction organization in India to examine the trends in construction accidents for the period 2008-2014. In India, safety performance is gauged basing on safety indices; frequency, severity and incidence rates. It is not practicable to take decisions or to implement safety strategies on the basis of indices. The data used for this study was collected from a leading construction organization involved in execution of major construction activities all over India and abroad. The multiple regression method was adopted to model the pattern of safety indices wise .The pattern showed that significant relationships exist between the three safety indices and the related independent variables.

Road safety performance indicators for the interurban road network.

Science.gov (United States)

Yannis, George; Weijermars, Wendy; Gitelman, Victoria; Vis, Martijn; Chaziris, Antonis; Papadimitriou, Eleonora; Azevedo, Carlos Lima

2013-11-01

Various road safety performance indicators (SPIs) have been proposed for different road safety research areas, mainly as regards driver behaviour (e.g. seat belt use, alcohol, drugs, etc.) and vehicles (e.g. passive safety); however, no SPIs for the road network and design have been developed. The objective of this research is the development of an SPI for the road network, to be used as a benchmark for cross-region comparisons. The developed SPI essentially makes a comparison of the existing road network to the theoretically required one, defined as one which meets some minimum requirements with respect to road safety. This paper presents a theoretical concept for the determination of this SPI as well as a translation of this theory into a practical method. Also, the method is applied in a number of pilot countries namely the Netherlands, Portugal, Greece and Israel. The results show that the SPI could be efficiently calculated in all countries, despite some differences in the data sources. In general, the calculated overall SPI scores were realistic and ranged from 81 to 94%, with the exception of Greece where the SPI was relatively lower (67%). However, the SPI should be considered as a first attempt to determine the safety level of the road network. The proposed method has some limitations and could be further improved. The paper presents directions for further research to further develop the SPI. Copyright © 2012 Elsevier Ltd. All rights reserved.

Use of two population metrics clarifies biodiversity dynamics in large-scale monitoring: the case of trees in Japanese old-growth forests: the need for multiple population metrics in large-scale monitoring.

Science.gov (United States)

Ogawa, Mifuyu; Yamaura, Yuichi; Abe, Shin; Hoshino, Daisuke; Hoshizaki, Kazuhiko; Iida, Shigeo; Katsuki, Toshio; Masaki, Takashi; Niiyama, Kaoru; Saito, Satoshi; Sakai, Takeshi; Sugita, Hisashi; Tanouchi, Hiroyuki; Amano, Tatsuya; Taki, Hisatomo; Okabe, Kimiko

2011-07-01

Many indicators/indices provide information on whether the 2010 biodiversity target of reducing declines in biodiversity have been achieved. The strengths and limitations of the various measures used to assess the success of such measures are now being discussed. Biodiversity dynamics are often evaluated by a single biological population metric, such as the abundance of each species. Here we examined tree population dynamics of 52 families (192 species) at 11 research sites (three vegetation zones) of Japanese old-growth forests using two population metrics: number of stems and basal area. We calculated indices that track the rate of change in all species of tree by taking the geometric mean of changes in population metrics between the 1990s and the 2000s at the national level and at the levels of the vegetation zone and family. We specifically focused on whether indices based on these two metrics behaved similarly. The indices showed that (1) the number of stems declined, whereas basal area did not change at the national level and (2) the degree of change in the indices varied by vegetation zone and family. These results suggest that Japanese old-growth forests have not degraded and may even be developing in some vegetation zones, and indicate that the use of a single population metric (or indicator/index) may be insufficient to precisely understand the state of biodiversity. It is therefore important to incorporate more metrics into monitoring schemes to overcome the risk of misunderstanding or misrepresenting biodiversity dynamics.

Evaluating and Estimating the WCET Criticality Metric

DEFF Research Database (Denmark)

Jordan, Alexander

2014-01-01

a programmer (or compiler) from targeting optimizations the right way. A possible resort is to use a metric that targets WCET and which can be efficiently computed for all code parts of a program. Similar to dynamic profiling techniques, which execute code with input that is typically expected...... for the application, based on WCET analysis we can indicate how critical a code fragment is, in relation to the worst-case bound. Computing such a metric on top of static analysis, incurs a certain overhead though, which increases with the complexity of the underlying WCET analysis. We present our approach...... to estimate the Criticality metric, by relaxing the precision of WCET analysis. Through this, we can reduce analysis time by orders of magnitude, while only introducing minor error. To evaluate our estimation approach and share our garnered experience using the metric, we evaluate real-time programs, which...

The effect of Health, Safety and Environment Management System (HSE-MS on the improvement of safety performance indices in Urea and Ammonia Kermanshah Petrochemical Company

Directory of Open Access Journals (Sweden)

M. S. Poursoleiman

2015-09-01

Full Text Available Introduction: Work-related accidents may cause damage to people, environment and lead to waste of time and money. Health, Safety and Environment Management System has been developed in order to reduce accidents. This study aimed to investigate the effect of implementation of this system on reduction of the accidents and its consequences and also on the safety performance indices in Kermanshah Petrochemical Company. Material and Method: In this study, records of accidents were collected by OSHA incident report form 301 over 4 years. Following, the mean annual accidents and its consequences and safety performance indices were calculated and reported. Then, using statistical analysis, the impacts of two years implementation of this system on the accidents and its consequences and safety performance indices were evaluated. Result: The results showed that the implementation of HSE system was significantly correlated with Frequency Severity Indicator, Accident Severity Rate, lost days, minor accidents and total incidents (P-value 0.05. Conclusion: The implementation of Health, Safety and the Environment Management System caused a reduction in accidents and its consequences and most of the safety performance indices in the entire process cycle of Kermanshah Petrochemical Company. Overall, safety condition has been improved considerably.

One safety critical indicators model for regulatory actions on nuclear power plants based on a level 1 PSA

International Nuclear Information System (INIS)

Araujo, Jefferson Borges

2006-03-01

This study presents a general methodology to the establishment, selection and use of safety indicators for a two loop PWR plant, as Angra 1. The study performed identifies areas considered critical for the plant operational safety. For each of these areas, strategic sub-areas are defined. For each strategic sub-area, specific safety indicators are defined. These proposed Safety Indicators are based on the contribution to risk considering a quantitative risk analysis. For each safety indicator, a goal, a bounded interval and proper bases are developed, to allow for a clear and comprehensive individual behavior evaluation. Additionally, an integrated evaluation of the indicators, using expert systems, was done to obtain an overview of the plant general safety. This methodology can be used for identifying situations where the plant safety is challenged, by giving a general overview of the plant operational condition. Additionally, this study can also identify eventual room for improvements by generating suggestions and recommendations, as a complement for regulatory actions and inspections, focusing resources on eventual existing weaknesses, in order to increase or maintain a high pattern of operational safety. (author)

Software Quality Assurance Metrics

Science.gov (United States)

McRae, Kalindra A.

2004-01-01

Software Quality Assurance (SQA) is a planned and systematic set of activities that ensures conformance of software life cycle processes and products conform to requirements, standards and procedures. In software development, software quality means meeting requirements and a degree of excellence and refinement of a project or product. Software Quality is a set of attributes of a software product by which its quality is described and evaluated. The set of attributes includes functionality, reliability, usability, efficiency, maintainability, and portability. Software Metrics help us understand the technical process that is used to develop a product. The process is measured to improve it and the product is measured to increase quality throughout the life cycle of software. Software Metrics are measurements of the quality of software. Software is measured to indicate the quality of the product, to assess the productivity of the people who produce the product, to assess the benefits derived from new software engineering methods and tools, to form a baseline for estimation, and to help justify requests for new tools or additional training. Any part of the software development can be measured. If Software Metrics are implemented in software development, it can save time, money, and allow the organization to identify the caused of defects which have the greatest effect on software development. The summer of 2004, I worked with Cynthia Calhoun and Frank Robinson in the Software Assurance/Risk Management department. My task was to research and collect, compile, and analyze SQA Metrics that have been used in other projects that are not currently being used by the SA team and report them to the Software Assurance team to see if any metrics can be implemented in their software assurance life cycle process.

Integrated Metrics for Improving the Life Cycle Approach to Assessing Product System Sustainability

Directory of Open Access Journals (Sweden)

Wesley Ingwersen

2014-03-01

Full Text Available Life cycle approaches are critical for identifying and reducing environmental burdens of products. While these methods can indicate potential environmental impacts of a product, current Life Cycle Assessment (LCA methods fail to integrate the multiple impacts of a system into unified measures of social, economic or environmental performance related to sustainability. Integrated metrics that combine multiple aspects of system performance based on a common scientific or economic principle have proven to be valuable for sustainability evaluation. In this work, we propose methods of adapting four integrated metrics for use with LCAs of product systems: ecological footprint, emergy, green net value added, and Fisher information. These metrics provide information on the full product system in land, energy, monetary equivalents, and as a unitless information index; each bundled with one or more indicators for reporting. When used together and for relative comparison, integrated metrics provide a broader coverage of sustainability aspects from multiple theoretical perspectives that is more likely to illuminate potential issues than individual impact indicators. These integrated metrics are recommended for use in combination with traditional indicators used in LCA. Future work will test and demonstrate the value of using these integrated metrics and combinations to assess product system sustainability.

Effect of thematic map misclassification on landscape multi-metric assessment.

Science.gov (United States)

Kleindl, William J; Powell, Scott L; Hauer, F Richard

2015-06-01

Advancements in remote sensing and computational tools have increased our awareness of large-scale environmental problems, thereby creating a need for monitoring, assessment, and management at these scales. Over the last decade, several watershed and regional multi-metric indices have been developed to assist decision-makers with planning actions of these scales. However, these tools use remote-sensing products that are subject to land-cover misclassification, and these errors are rarely incorporated in the assessment results. Here, we examined the sensitivity of a landscape-scale multi-metric index (MMI) to error from thematic land-cover misclassification and the implications of this uncertainty for resource management decisions. Through a case study, we used a simplified floodplain MMI assessment tool, whose metrics were derived from Landsat thematic maps, to initially provide results that were naive to thematic misclassification error. Using a Monte Carlo simulation model, we then incorporated map misclassification error into our MMI, resulting in four important conclusions: (1) each metric had a different sensitivity to error; (2) within each metric, the bias between the error-naive metric scores and simulated scores that incorporate potential error varied in magnitude and direction depending on the underlying land cover at each assessment site; (3) collectively, when the metrics were combined into a multi-metric index, the effects were attenuated; and (4) the index bias indicated that our naive assessment model may overestimate floodplain condition of sites with limited human impacts and, to a lesser extent, either over- or underestimated floodplain condition of sites with mixed land use.

Relevance of metric-free interactions in flocking phenomena.

Science.gov (United States)

Ginelli, Francesco; Chaté, Hugues

2010-10-15

We show that the collective properties of self-propelled particles aligning with their topological (Voronoi) neighbors are qualitatively different from those of usual models where metric interaction ranges are used. This relevance of metric-free interactions, shown in a minimal setting, indicate that realistic models for the cohesive motion of cells, bird flocks, and fish schools may have to incorporate them, as suggested by recent observations.

A safety-critical decision support system evaluation using situation awareness and workload measures

International Nuclear Information System (INIS)

Naderpour, Mohsen; Lu, Jie; Zhang, Guangquan

2016-01-01

To ensure the safety of operations in safety-critical systems, it is necessary to maintain operators' situation awareness (SA) at a high level. A situation awareness support system (SASS) has therefore been developed to handle uncertain situations [1]. This paper aims to systematically evaluate the enhancement of SA in SASS by applying a multi-perspective approach. The approach consists of two SA metrics, SAGAT and SART, and one workload metric, NASA-TLX. The first two metrics are used for the direct objective and subjective measurement of SA, while the third is used to estimate operator workload. The approach is applied in a safety-critical environment called residue treater, located at a chemical plant in which a poor human-system interface reduced the operator's SA and caused one of the worst accidents in US history. A counterbalanced within-subjects experiment is performed using a virtual environment interface with and without the support of SASS. The results indicate that SASS improves operators' SA, and specifically has benefits for SA levels 2 and 3. In addition, it is concluded that SASS reduces operator workload, although further investigations in different environments with a larger number of participants have been suggested. - Highlights: • The suitability of a cognitive decision support system is investigated. • An evaluation approach considering situation awareness and workload measures is proposed. • A computerized system based on the proposed approach is implemented. • The implemented system is used in a safety-critical environment.

Evidence-based Metrics Toolkit for Measuring Safety and Efficiency in Human-Automation Systems

Data.gov (United States)

National Aeronautics and Space Administration — APRIL 2016 NOTE: Principal Investigator moved to Rice University in mid-2015. Project continues at Rice with the same title (Evidence-based Metrics Toolkit for...

Important LiDAR metrics for discriminating forest tree species in Central Europe

Science.gov (United States)

Shi, Yifang; Wang, Tiejun; Skidmore, Andrew K.; Heurich, Marco

2018-03-01

Numerous airborne LiDAR-derived metrics have been proposed for classifying tree species. Yet an in-depth ecological and biological understanding of the significance of these metrics for tree species mapping remains largely unexplored. In this paper, we evaluated the performance of 37 frequently used LiDAR metrics derived under leaf-on and leaf-off conditions, respectively, for discriminating six different tree species in a natural forest in Germany. We firstly assessed the correlation between these metrics. Then we applied a Random Forest algorithm to classify the tree species and evaluated the importance of the LiDAR metrics. Finally, we identified the most important LiDAR metrics and tested their robustness and transferability. Our results indicated that about 60% of LiDAR metrics were highly correlated to each other (|r| > 0.7). There was no statistically significant difference in tree species mapping accuracy between the use of leaf-on and leaf-off LiDAR metrics. However, combining leaf-on and leaf-off LiDAR metrics significantly increased the overall accuracy from 58.2% (leaf-on) and 62.0% (leaf-off) to 66.5% as well as the kappa coefficient from 0.47 (leaf-on) and 0.51 (leaf-off) to 0.58. Radiometric features, especially intensity related metrics, provided more consistent and significant contributions than geometric features for tree species discrimination. Specifically, the mean intensity of first-or-single returns as well as the mean value of echo width were identified as the most robust LiDAR metrics for tree species discrimination. These results indicate that metrics derived from airborne LiDAR data, especially radiometric metrics, can aid in discriminating tree species in a mixed temperate forest, and represent candidate metrics for tree species classification and monitoring in Central Europe.

Safety Metrics for Human-Computer Controlled Systems

Science.gov (United States)

Leveson, Nancy G; Hatanaka, Iwao

2000-01-01

The rapid growth of computer technology and innovation has played a significant role in the rise of computer automation of human tasks in modem production systems across all industries. Although the rationale for automation has been to eliminate "human error" or to relieve humans from manual repetitive tasks, various computer-related hazards and accidents have emerged as a direct result of increased system complexity attributed to computer automation. The risk assessment techniques utilized for electromechanical systems are not suitable for today's software-intensive systems or complex human-computer controlled systems.This thesis will propose a new systemic model-based framework for analyzing risk in safety-critical systems where both computers and humans are controlling safety-critical functions. A new systems accident model will be developed based upon modem systems theory and human cognitive processes to better characterize system accidents, the role of human operators, and the influence of software in its direct control of significant system functions Better risk assessments will then be achievable through the application of this new framework to complex human-computer controlled systems.

Accuracy and precision in the calculation of phenology metrics

DEFF Research Database (Denmark)

Ferreira, Ana Sofia; Visser, Andre; MacKenzie, Brian

2014-01-01

a phenology metric is first determined from a noise- and gap-free time series, and again once it has been modified. We show that precision is a greater concern than accuracy for many of these metrics, an important point that has been hereto overlooked in the literature. The variability in precision between...... phenology metrics is substantial, but it can be improved by the use of preprocessing techniques (e.g., gap-filling or smoothing). Furthermore, there are important differences in the inherent variability of the metrics that may be crucial in the interpretation of studies based upon them. Of the considered......Phytoplankton phenology (the timing of seasonal events) is a commonly used indicator for evaluating responses of marine ecosystems to climate change. However, phenological metrics are vulnerable to observation-(bloom amplitude, missing data, and observational noise) and analysis-related (temporal...

Semantic metrics

OpenAIRE

Hu, Bo; Kalfoglou, Yannis; Dupplaw, David; Alani, Harith; Lewis, Paul; Shadbolt, Nigel

2006-01-01

In the context of the Semantic Web, many ontology-related operations, e.g. ontology ranking, segmentation, alignment, articulation, reuse, evaluation, can be boiled down to one fundamental operation: computing the similarity and/or dissimilarity among ontological entities, and in some cases among ontologies themselves. In this paper, we review standard metrics for computing distance measures and we propose a series of semantic metrics. We give a formal account of semantic metrics drawn from a...

Metric modular spaces

CERN Document Server

Chistyakov, Vyacheslav

2015-01-01

Aimed toward researchers and graduate students familiar with elements of functional analysis, linear algebra, and general topology; this book contains a general study of modulars, modular spaces, and metric modular spaces. Modulars may be thought of as generalized velocity fields and serve two important purposes: generate metric spaces in a unified manner and provide a weaker convergence, the modular convergence, whose topology is non-metrizable in general. Metric modular spaces are extensions of metric spaces, metric linear spaces, and classical modular linear spaces. The topics covered include the classification of modulars, metrizability of modular spaces, modular transforms and duality between modular spaces, metric  and modular topologies. Applications illustrated in this book include: the description of superposition operators acting in modular spaces, the existence of regular selections of set-valued mappings, new interpretations of spaces of Lipschitzian and absolutely continuous mappings, the existe...

Energy-Based Metrics for Arthroscopic Skills Assessment.

Science.gov (United States)

Poursartip, Behnaz; LeBel, Marie-Eve; McCracken, Laura C; Escoto, Abelardo; Patel, Rajni V; Naish, Michael D; Trejos, Ana Luisa

2017-08-05

Minimally invasive skills assessment methods are essential in developing efficient surgical simulators and implementing consistent skills evaluation. Although numerous methods have been investigated in the literature, there is still a need to further improve the accuracy of surgical skills assessment. Energy expenditure can be an indication of motor skills proficiency. The goals of this study are to develop objective metrics based on energy expenditure, normalize these metrics, and investigate classifying trainees using these metrics. To this end, different forms of energy consisting of mechanical energy and work were considered and their values were divided by the related value of an ideal performance to develop normalized metrics. These metrics were used as inputs for various machine learning algorithms including support vector machines (SVM) and neural networks (NNs) for classification. The accuracy of the combination of the normalized energy-based metrics with these classifiers was evaluated through a leave-one-subject-out cross-validation. The proposed method was validated using 26 subjects at two experience levels (novices and experts) in three arthroscopic tasks. The results showed that there are statistically significant differences between novices and experts for almost all of the normalized energy-based metrics. The accuracy of classification using SVM and NN methods was between 70% and 95% for the various tasks. The results show that the normalized energy-based metrics and their combination with SVM and NN classifiers are capable of providing accurate classification of trainees. The assessment method proposed in this study can enhance surgical training by providing appropriate feedback to trainees about their level of expertise and can be used in the evaluation of proficiency.

Remote video auditing with real-time feedback in an academic surgical suite improves safety and efficiency metrics: a cluster randomised study.

Science.gov (United States)

Overdyk, Frank J; Dowling, Oonagh; Newman, Sheldon; Glatt, David; Chester, Michelle; Armellino, Donna; Cole, Brandon; Landis, Gregg S; Schoenfeld, David; DiCapua, John F

2016-12-01

Compliance with the surgical safety checklist during operative procedures has been shown to reduce inhospital mortality and complications but proper execution by the surgical team remains elusive. We evaluated the impact of remote video auditing with real-time provider feedback on checklist compliance during sign-in, time-out and sign-out and case turnover times. Prospective, cluster randomised study in a 23-operating room (OR) suite. Surgeons, anaesthesia providers, nurses and support staff. ORs were randomised to receive, or not receive, real-time feedback on safety checklist compliance and efficiency metrics via display boards and text messages, followed by a period during which all ORs received feedback. Checklist compliance (Pass/Fail) during sign-in, time-out and sign-out demonstrated by (1) use of checklist, (2) team attentiveness, (3) required duration, (4) proper sequence and duration of case turnover times. Sign-in, time-out and sign-out PASS rates increased from 25%, 16% and 32% during baseline phase (n=1886) to 64%, 84% and 68% for feedback ORs versus 40%, 77% and 51% for no-feedback ORs (pauditing with feedback improves surgical safety checklist compliance for all cases, and turnover time for scheduled cases, but not for unscheduled cases. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

The use of probabilistic safety assessment based maintenance indicators to increase the availability of safety related systems in nuclear power plants

International Nuclear Information System (INIS)

Kirchsteiger, C.

1991-04-01

This work describes the theoretical development of a Probabilistic Safety Assessment (PSA) based Performance Indicator (PI) model for a comprehensive Maintenance Efficiency Analysis (MEA) and its practical application to past operational history data of a certain Nuclear Power Plant. Plant specific equipment history and maintenance work order data have been collected and analysed using various advanced statistical procedures (nonparametric methods, multivariate analysis) in order to be able to estimate safety system related equipment and maintenance process trends. The main results of such a MEA case study are the trends in the (in)effectiveness of the performance of a selected safety system and its dominant maintenance related causes of its bad (good) equipment performance. Finally, the therefrom gained results are used to propose a new set of safety system based and maintenance related Performance Indicators, including suggestions for a corresponding plant specific maintenance data collection system. (author)

The profile of quantitative risk indicators in Krsko NPP

International Nuclear Information System (INIS)

Vrbanic, I.; Basic, I.; Bilic-Zabric, T.; Spiler, J.

2004-01-01

During the past decade strong initiative was observed which was aimed at incorporating information on risk into various aspects of operation of nuclear power plants. The initiative was observable in activities carried out by regulators as well as utilities and industry. It resulted in establishing the process, or procedure, which is often referred to as integrated decision making or risk informed decision making. In this process, engineering analyses and evaluations that are usually termed traditional and that rely on considerations of safety margins and defense in depth are supplemented by quantitative indicators of risk. Throughout the process, the plant risk was most commonly expressed in terms of likelihood of events involving damage to the reactor core and events with radiological releases to the environment. These became two commonly used quantitative indicators or metrics of plant risk (or, reciprocally, plant safety). They were evaluated for their magnitude (e.g. the expected number of events per specified time interval), as well as their profile (e.g. the types of contributing events). The information for quantitative risk indicators (to be used in risk informing process) is obtained from plant's probabilistic safety analyses or analyses of hazards. It is dependable on issues such as availability of input data or quality of model or analysis. Nuclear power plant Krsko has recently performed Periodic Safety Review, which was a good opportunity to evaluate and integrate the plant specific information on quantitative plant risk indicators and their profile. The paper discusses some aspects of quantitative plant risk profile and its perception.(author)

Toward risk assessment 2.0: Safety supervisory control and model-based hazard monitoring for risk-informed safety interventions

International Nuclear Information System (INIS)

Favarò, Francesca M.; Saleh, Joseph H.

2016-01-01

Probabilistic Risk Assessment (PRA) is a staple in the engineering risk community, and it has become to some extent synonymous with the entire quantitative risk assessment undertaking. Limitations of PRA continue to occupy researchers, and workarounds are often proposed. After a brief review of this literature, we propose to address some of PRA's limitations by developing a novel framework and analytical tools for model-based system safety, or safety supervisory control, to guide safety interventions and support a dynamic approach to risk assessment and accident prevention. Our work shifts the emphasis from the pervading probabilistic mindset in risk assessment toward the notions of danger indices and hazard temporal contingency. The framework and tools here developed are grounded in Control Theory and make use of the state-space formalism in modeling dynamical systems. We show that the use of state variables enables the definition of metrics for accident escalation, termed hazard levels or danger indices, which measure the “proximity” of the system state to adverse events, and we illustrate the development of such indices. Monitoring of the hazard levels provides diagnostic information to support both on-line and off-line safety interventions. For example, we show how the application of the proposed tools to a rejected takeoff scenario provides new insight to support pilots’ go/no-go decisions. Furthermore, we augment the traditional state-space equations with a hazard equation and use the latter to estimate the times at which critical thresholds for the hazard level are (b)reached. This estimation process provides important prognostic information and produces a proxy for a time-to-accident metric or advance notice for an impending adverse event. The ability to estimate these two hazard coordinates, danger index and time-to-accident, offers many possibilities for informing system control strategies and improving accident prevention and risk mitigation

Presenting Software Metrics Indicators- A Case Study

DEFF Research Database (Denmark)

Pantazos, Kostas; Shollo, Arisa; Staron, Miroslaw

2010-01-01

Industrial measurement systems in software projects can generate a large number of indicators (main measurements). Having a large number of indicators might result in failing to present an overview of the status of measured entities. In consequence, managers might experience problems when making...

Development of Behavioral Indicators of Competences for Safety Culture of Nuclear Power Plants: A Preliminary Study

International Nuclear Information System (INIS)

Moon, Kwangsu; Kim, Sa Kil; Oh, Yeon Ju; Shin, Youmin; Lee, Yong-Hee; Jang, Tong Il

2015-01-01

The term of safety competency in nuclear field was presented in the OECD/NEA workshop held in 1999. A model of the safety culture competencies in nuclear power plants was developed by KAERI (Korea Atomic Energy Research Institute). In general, a competency (competence) is defined as 'cluster of employee's attribute, knowledge, skill, ability or other characteristic that contributes to successful job performance'. We also defined safety culture competency as 'cluster of various internal characteristics (e.g., knowledge, skill, ability, motive, attitude and etc.) of employee that contribute to perform job safely and shape a healthy and strong safety culture.' By this definition, the safety culture competency is the broader construct including job competency. An employee having high level of safety culture competency shows extra discretionary effort to improve safety of peer, team and organization in addition to the individual's successful and safe job accomplishment. The behavioral indicators for each of the competencies are focal points of conversations on progress and are monitored continuously by self-assessment and managers or supervisors' intervention. Deficiencies in any of these indicators can point to coaching, training or other learning opportunities that employees may be required in order to improve. The purpose of this study was to derive a model of safety competencies for improving safety culture of NPPs and develop a set of behavioral indicators of each competency. In addition, the method of measuring behavioral indicators was suggested. For the application of developed safety culture competences and behavioral indicators, the most suitable measuring method for behavioral indicators must be developed. In the case of behavioral observations, behavioral dimensions (frequency, persistence and latency), observation possibility, occurrence basis of behavior (daily job performance, situational dependent) are considered to

Development of Behavioral Indicators of Competences for Safety Culture of Nuclear Power Plants: A Preliminary Study

Energy Technology Data Exchange (ETDEWEB)

Moon, Kwangsu; Kim, Sa Kil; Oh, Yeon Ju; Shin, Youmin; Lee, Yong-Hee; Jang, Tong Il [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-10-15

The term of safety competency in nuclear field was presented in the OECD/NEA workshop held in 1999. A model of the safety culture competencies in nuclear power plants was developed by KAERI (Korea Atomic Energy Research Institute). In general, a competency (competence) is defined as 'cluster of employee's attribute, knowledge, skill, ability or other characteristic that contributes to successful job performance'. We also defined safety culture competency as 'cluster of various internal characteristics (e.g., knowledge, skill, ability, motive, attitude and etc.) of employee that contribute to perform job safely and shape a healthy and strong safety culture.' By this definition, the safety culture competency is the broader construct including job competency. An employee having high level of safety culture competency shows extra discretionary effort to improve safety of peer, team and organization in addition to the individual's successful and safe job accomplishment. The behavioral indicators for each of the competencies are focal points of conversations on progress and are monitored continuously by self-assessment and managers or supervisors' intervention. Deficiencies in any of these indicators can point to coaching, training or other learning opportunities that employees may be required in order to improve. The purpose of this study was to derive a model of safety competencies for improving safety culture of NPPs and develop a set of behavioral indicators of each competency. In addition, the method of measuring behavioral indicators was suggested. For the application of developed safety culture competences and behavioral indicators, the most suitable measuring method for behavioral indicators must be developed. In the case of behavioral observations, behavioral dimensions (frequency, persistence and latency), observation possibility, occurrence basis of behavior (daily job performance, situational dependent) are considered to

Baby universe metric equivalent to an interior black-hole metric

International Nuclear Information System (INIS)

Gonzalez-Diaz, P.F.

1991-01-01

It is shown that the maximally extended metric corresponding to a large wormhole is the unique possible wormhole metric whose baby universe sector is conformally equivalent ot the maximal inextendible Kruskal metric corresponding to the interior region of a Schwarzschild black hole whose gravitational radius is half the wormhole neck radius. The physical implications of this result in the black hole evaporation process are discussed. (orig.)

Selection and ranking of occupational safety indicators based on fuzzy AHP: A case study in road construction companies

Directory of Open Access Journals (Sweden)

Janackovic, Goran Lj.

2013-11-01

Full Text Available This paper presents the factors, performance, and indicators of occupational safety, as well as a method to select and rank occupational safety indicators based on the expert evaluation method and the fuzzy analytic hierarchy process (fuzzy AHP. A case study is done on road construction companies in Serbia. The key safety performance indicators for the road construction industry are identified and ranked according to the results of a survey that included experts who assessed occupational safety risks in these companies. The case study confirmed that organisational factors have a dominant effect on the quality of the occupational health and safety management system in Serbian road construction companies.

Assessing Software Quality Through Visualised Cohesion Metrics

Directory of Open Access Journals (Sweden)

Timothy Shih

2001-05-01

Full Text Available Cohesion is one of the most important factors for software quality as well as maintainability, reliability and reusability. Module cohesion is defined as a quality attribute that seeks for measuring the singleness of the purpose of a module. The module of poor quality can be a serious obstacle to the system quality. In order to design a good software quality, software managers and engineers need to introduce cohesion metrics to measure and produce desirable software. A highly cohesion software is thought to be a desirable constructing. In this paper, we propose a function-oriented cohesion metrics based on the analysis of live variables, live span and the visualization of processing element dependency graph. We give six typical cohesion examples to be measured as our experiments and justification. Therefore, a well-defined, well-normalized, well-visualized and well-experimented cohesion metrics is proposed to indicate and thus enhance software cohesion strength. Furthermore, this cohesion metrics can be easily incorporated with software CASE tool to help software engineers to improve software quality.

Patient safety in a service of medical physics. Key indicators

International Nuclear Information System (INIS)

Font Gomez, J. A.; Gandia Martinez, A.; Jimenez Albericio, F. J.; Andres Redondo, M. M.; Mengual Gil, M. A.

2013-01-01

The key indicators are those that endure over time to monitor the degree of compliance with the criteria in the processes that are considered key in the service. In the case of our service, define key indicators within the framework of ISO 9001 certification in the process of clinical dosimetry. All problems do not have same casuistry or not, have the same detrimental to the safety of the patient. We have prioritized some of the problems and opportunities for improvement have been found. Standard refers to the value of the indicator that we should or would like to achieve in such a way that if not achieved, action of improvement will be required. (Author)

Main indicators used in french PWR units for safety, operation and maintenance

International Nuclear Information System (INIS)

Guio, J.M. de

1990-01-01

The development of analyses aimed at improving nuclear plant operations through an optimum use of experience feedback naturally leads to the implementation of trend indicators in the fields of safety, operation and maintenance. This process, part of the more general framework of promoting safety culture, facilitates collective thinking on these matters at the local site level, and, at the national level, allows a clearer definition of the main lines of strategy and helps coordinate the resulting actions

Properties of C-metric spaces

Science.gov (United States)

Croitoru, Anca; Apreutesei, Gabriela; Mastorakis, Nikos E.

2017-09-01

The subject of this paper belongs to the theory of approximate metrics [23]. An approximate metric on X is a real application defined on X × X that satisfies only a part of the metric axioms. In a recent paper [23], we introduced a new type of approximate metric, named C-metric, that is an application which satisfies only two metric axioms: symmetry and triangular inequality. The remarkable fact in a C-metric space is that a topological structure induced by the C-metric can be defined. The innovative idea of this paper is that we obtain some convergence properties of a C-metric space in the absence of a metric. In this paper we investigate C-metric spaces. The paper is divided into four sections. Section 1 is for Introduction. In Section 2 we recall some concepts and preliminary results. In Section 3 we present some properties of C-metric spaces, such as convergence properties, a canonical decomposition and a C-fixed point theorem. Finally, in Section 4 some conclusions are highlighted.

Learning Low-Dimensional Metrics

OpenAIRE

Jain, Lalit; Mason, Blake; Nowak, Robert

2017-01-01

This paper investigates the theoretical foundations of metric learning, focused on three key questions that are not fully addressed in prior work: 1) we consider learning general low-dimensional (low-rank) metrics as well as sparse metrics; 2) we develop upper and lower (minimax)bounds on the generalization error; 3) we quantify the sample complexity of metric learning in terms of the dimension of the feature space and the dimension/rank of the underlying metric;4) we also bound the accuracy ...

Evaluation of Vehicle-Based Crash Severity Metrics.

Science.gov (United States)

Tsoi, Ada H; Gabler, Hampton C

2015-01-01

Vehicle change in velocity (delta-v) is a widely used crash severity metric used to estimate occupant injury risk. Despite its widespread use, delta-v has several limitations. Of most concern, delta-v is a vehicle-based metric which does not consider the crash pulse or the performance of occupant restraints, e.g. seatbelts and airbags. Such criticisms have prompted the search for alternative impact severity metrics based upon vehicle kinematics. The purpose of this study was to assess the ability of the occupant impact velocity (OIV), acceleration severity index (ASI), vehicle pulse index (VPI), and maximum delta-v (delta-v) to predict serious injury in real world crashes. The study was based on the analysis of event data recorders (EDRs) downloaded from the National Automotive Sampling System / Crashworthiness Data System (NASS-CDS) 2000-2013 cases. All vehicles in the sample were GM passenger cars and light trucks involved in a frontal collision. Rollover crashes were excluded. Vehicles were restricted to single-event crashes that caused an airbag deployment. All EDR data were checked for a successful, completed recording of the event and that the crash pulse was complete. The maximum abbreviated injury scale (MAIS) was used to describe occupant injury outcome. Drivers were categorized into either non-seriously injured group (MAIS2-) or seriously injured group (MAIS3+), based on the severity of any injuries to the thorax, abdomen, and spine. ASI and OIV were calculated according to the Manual for Assessing Safety Hardware. VPI was calculated according to ISO/TR 12353-3, with vehicle-specific parameters determined from U.S. New Car Assessment Program crash tests. Using binary logistic regression, the cumulative probability of injury risk was determined for each metric and assessed for statistical significance, goodness-of-fit, and prediction accuracy. The dataset included 102,744 vehicles. A Wald chi-square test showed each vehicle-based crash severity metric

New risk metrics and mathematical tools for risk analysis: Current and future challenges

International Nuclear Information System (INIS)

Skandamis, Panagiotis N.; Andritsos, Nikolaos; Psomas, Antonios; Paramythiotis, Spyridon

2015-01-01

The current status of the food safety supply world wide, has led Food and Agriculture Organization (FAO) and World Health Organization (WHO) to establishing Risk Analysis as the single framework for building food safety control programs. A series of guidelines and reports that detail out the various steps in Risk Analysis, namely Risk Management, Risk Assessment and Risk Communication is available. The Risk Analysis approach enables integration between operational food management systems, such as Hazard Analysis Critical Control Points, public health and governmental decisions. To do that, a series of new Risk Metrics has been established as follows: i) the Appropriate Level of Protection (ALOP), which indicates the maximum numbers of illnesses in a population per annum, defined by quantitative risk assessments, and used to establish; ii) Food Safety Objective (FSO), which sets the maximum frequency and/or concentration of a hazard in a food at the time of consumption that provides or contributes to the ALOP. Given that ALOP is rather a metric of the public health tolerable burden (it addresses the total ‘failure’ that may be handled at a national level), it is difficult to be interpreted into control measures applied at the manufacturing level. Thus, a series of specific objectives and criteria for performance of individual processes and products have been established, all of them assisting in the achievement of FSO and hence, ALOP. In order to achieve FSO, tools quantifying the effect of processes and intrinsic properties of foods on survival and growth of pathogens are essential. In this context, predictive microbiology and risk assessment have offered an important assistance to Food Safety Management. Predictive modelling is the basis of exposure assessment and the development of stochastic and kinetic models, which are also available in the form of Web-based applications, e.g., COMBASE and Microbial Responses Viewer), or introduced into user

New risk metrics and mathematical tools for risk analysis: Current and future challenges

Energy Technology Data Exchange (ETDEWEB)

Skandamis, Panagiotis N., E-mail: pskan@aua.gr; Andritsos, Nikolaos, E-mail: pskan@aua.gr; Psomas, Antonios, E-mail: pskan@aua.gr; Paramythiotis, Spyridon, E-mail: pskan@aua.gr [Laboratory of Food Quality Control and Hygiene, Department of Food Science and Technology, Agricultural University of Athens, Iera Odos 75, 118 55, Athens (Greece)

2015-01-22

The current status of the food safety supply world wide, has led Food and Agriculture Organization (FAO) and World Health Organization (WHO) to establishing Risk Analysis as the single framework for building food safety control programs. A series of guidelines and reports that detail out the various steps in Risk Analysis, namely Risk Management, Risk Assessment and Risk Communication is available. The Risk Analysis approach enables integration between operational food management systems, such as Hazard Analysis Critical Control Points, public health and governmental decisions. To do that, a series of new Risk Metrics has been established as follows: i) the Appropriate Level of Protection (ALOP), which indicates the maximum numbers of illnesses in a population per annum, defined by quantitative risk assessments, and used to establish; ii) Food Safety Objective (FSO), which sets the maximum frequency and/or concentration of a hazard in a food at the time of consumption that provides or contributes to the ALOP. Given that ALOP is rather a metric of the public health tolerable burden (it addresses the total ‘failure’ that may be handled at a national level), it is difficult to be interpreted into control measures applied at the manufacturing level. Thus, a series of specific objectives and criteria for performance of individual processes and products have been established, all of them assisting in the achievement of FSO and hence, ALOP. In order to achieve FSO, tools quantifying the effect of processes and intrinsic properties of foods on survival and growth of pathogens are essential. In this context, predictive microbiology and risk assessment have offered an important assistance to Food Safety Management. Predictive modelling is the basis of exposure assessment and the development of stochastic and kinetic models, which are also available in the form of Web-based applications, e.g., COMBASE and Microbial Responses Viewer), or introduced into user

New risk metrics and mathematical tools for risk analysis: Current and future challenges

Science.gov (United States)

Skandamis, Panagiotis N.; Andritsos, Nikolaos; Psomas, Antonios; Paramythiotis, Spyridon

2015-01-01

The current status of the food safety supply world wide, has led Food and Agriculture Organization (FAO) and World Health Organization (WHO) to establishing Risk Analysis as the single framework for building food safety control programs. A series of guidelines and reports that detail out the various steps in Risk Analysis, namely Risk Management, Risk Assessment and Risk Communication is available. The Risk Analysis approach enables integration between operational food management systems, such as Hazard Analysis Critical Control Points, public health and governmental decisions. To do that, a series of new Risk Metrics has been established as follows: i) the Appropriate Level of Protection (ALOP), which indicates the maximum numbers of illnesses in a population per annum, defined by quantitative risk assessments, and used to establish; ii) Food Safety Objective (FSO), which sets the maximum frequency and/or concentration of a hazard in a food at the time of consumption that provides or contributes to the ALOP. Given that ALOP is rather a metric of the public health tolerable burden (it addresses the total `failure' that may be handled at a national level), it is difficult to be interpreted into control measures applied at the manufacturing level. Thus, a series of specific objectives and criteria for performance of individual processes and products have been established, all of them assisting in the achievement of FSO and hence, ALOP. In order to achieve FSO, tools quantifying the effect of processes and intrinsic properties of foods on survival and growth of pathogens are essential. In this context, predictive microbiology and risk assessment have offered an important assistance to Food Safety Management. Predictive modelling is the basis of exposure assessment and the development of stochastic and kinetic models, which are also available in the form of Web-based applications, e.g., COMBASE and Microbial Responses Viewer), or introduced into user-friendly softwares

Scalar-metric and scalar-metric-torsion gravitational theories

International Nuclear Information System (INIS)

Aldersley, S.J.

1977-01-01

The techniques of dimensional analysis and of the theory of tensorial concomitants are employed to study field equations in gravitational theories which incorporate scalar fields of the Brans-Dicke type. Within the context of scalar-metric gravitational theories, a uniqueness theorem for the geometric (or gravitational) part of the field equations is proven and a Lagrangian is determined which is uniquely specified by dimensional analysis. Within the context of scalar-metric-torsion gravitational theories a uniqueness theorem for field Lagrangians is presented and the corresponding Euler-Lagrange equations are given. Finally, an example of a scalar-metric-torsion theory is presented which is similar in many respects to the Brans-Dicke theory and the Einstein-Cartan theory

Metrics of quantum states

International Nuclear Information System (INIS)

Ma Zhihao; Chen Jingling

2011-01-01

In this work we study metrics of quantum states, which are natural generalizations of the usual trace metric and Bures metric. Some useful properties of the metrics are proved, such as the joint convexity and contractivity under quantum operations. Our result has a potential application in studying the geometry of quantum states as well as the entanglement detection.

Safety update on the use of recombinant activated factor VII in approved indications.

Science.gov (United States)

Neufeld, Ellis J; Négrier, Claude; Arkhammar, Per; Benchikh el Fegoun, Soraya; Simonsen, Mette Duelund; Rosholm, Anders; Seremetis, Stephanie

2015-06-01

This updated safety review summarises the large body of safety data available on the use of recombinant activated factor VII (rFVIIa) in approved indications: haemophilia with inhibitors, congenital factor VII (FVII) deficiency, acquired haemophilia and Glanzmann's thrombasthenia. Accumulated data up to 31 December 2013 from clinical trials as well as post-marketing data (registries, literature reports and spontaneous reports) were included. Overall, rFVIIa has shown a consistently favourable safety profile, with no unexpected safety concerns, in all approved indications. No confirmed cases of neutralising antibodies against rFVIIa have been reported in patients with congenital haemophilia, acquired haemophilia or Glanzmann's thrombasthenia. The favourable safety profile of rFVIIa can be attributed to the recombinant nature of rFVIIa and its localised mechanism of action at the site of vascular injury. Recombinant FVIIa activates factor X directly on the surface of activated platelets, which are present only at the site of injury, meaning that systemic activation of coagulation is avoided and the risk of thrombotic events (TEs) thus reduced. Nonetheless, close monitoring for signs and symptoms of TE is warranted in all patients treated with any pro-haemostatic agent, including rFVIIa, especially the elderly and any other patients with concomitant conditions and/or predisposing risk factors to thrombosis. Copyright © 2015 Elsevier Ltd. All rights reserved.

Applicability of Existing Objective Metrics of Perceptual Quality for Adaptive Video Streaming

DEFF Research Database (Denmark)

Søgaard, Jacob; Krasula, Lukás; Shahid, Muhammad

2016-01-01

Objective video quality metrics are designed to estimate the quality of experience of the end user. However, these objective metrics are usually validated with video streams degraded under common distortion types. In the presented work, we analyze the performance of published and known full......-reference and noreference quality metrics in estimating the perceived quality of adaptive bit-rate video streams knowingly out of scope. Experimental results indicate not surprisingly that state of the art objective quality metrics overlook the perceived degradations in the adaptive video streams and perform poorly...

METRIC context unit architecture

Energy Technology Data Exchange (ETDEWEB)

Simpson, R.O.

1988-01-01

METRIC is an architecture for a simple but powerful Reduced Instruction Set Computer (RISC). Its speed comes from the simultaneous processing of several instruction streams, with instructions from the various streams being dispatched into METRIC's execution pipeline as they become available for execution. The pipeline is thus kept full, with a mix of instructions for several contexts in execution at the same time. True parallel programming is supported within a single execution unit, the METRIC Context Unit. METRIC's architecture provides for expansion through the addition of multiple Context Units and of specialized Functional Units. The architecture thus spans a range of size and performance from a single-chip microcomputer up through large and powerful multiprocessors. This research concentrates on the specification of the METRIC Context Unit at the architectural level. Performance tradeoffs made during METRIC's design are discussed, and projections of METRIC's performance are made based on simulation studies.

State of the art metrics for aspect oriented programming

Science.gov (United States)

Ghareb, Mazen Ismaeel; Allen, Gary

2018-04-01

The quality evaluation of software, e.g., defect measurement, gains significance with higher use of software applications. Metric measurements are considered as the primary indicator of imperfection prediction and software maintenance in various empirical studies of software products. However, there is no agreement on which metrics are compelling quality indicators for novel development approaches such as Aspect Oriented Programming (AOP). AOP intends to enhance programming quality, by providing new and novel constructs for the development of systems, for example, point cuts, advice and inter-type relationships. Hence, it is not evident if quality pointers for AOP can be derived from direct expansions of traditional OO measurements. Then again, investigations of AOP do regularly depend on established coupling measurements. Notwithstanding the late reception of AOP in empirical studies, coupling measurements have been adopted as useful markers of flaw inclination in this context. In this paper we will investigate the state of the art metrics for measurement of Aspect Oriented systems development.

Comparing emergy accounting with well-known sustainability metrics: The case of Southern Cone Common Market, Mercosur

International Nuclear Information System (INIS)

Giannetti, B.F.; Almeida, C.M.V.B.; Bonilla, S.H.

2010-01-01

The quality and the power of human activities affect the external environment in different ways that can be measured and evaluated by means of several approaches and indicators. While the scientific community has been publishing several proposals for sustainable development indicators, there is still no consensus regarding the best approach to the use of these indicators and their reliability to measure sustainability. It is important, therefore, to question the effectiveness of sustainable development indicators in an effort to continue in the search for sustainability. This paper compares the results obtained with emergy accounting with five global Sustainability Metrics (SMs) proposed in the literature to verify if metrics are communicating coherent and similar information to guide decision makers towards sustainable development. Results obtained using emergy indices are discussed with the aid of emergy ternary diagrams. Metrics are confronted with emergy results, and the degree of variability among them is analyzed using a correlation matrix created for the Mercosur nations. The contrast of results clearly shows that metrics arrive at different interpretations about the sustainability of the nations studied, but also that some metrics may be grouped and used more prudently. Mercosur is presented as a case study to highlight and explain the discrepancies and similarities among Sustainability Metrics, and to expose the extent of emergy accounting.

Exposure data and risk indicators for safety performance assessment in Europe.

NARCIS (Netherlands)

Papadimitriou, E. Yannis, G. Bijleveld, F.D. & Cardoso, J.L.

2013-01-01

The objective of this paper is the analysis of the state-of-the-art in risk indicators and exposure data for safety performance assessment in Europe, in terms of data availability, collection methodologies and use. More specifically, the concepts of exposure and risk are explored, as well as the

Observable traces of non-metricity: New constraints on metric-affine gravity

Science.gov (United States)

Delhom-Latorre, Adrià; Olmo, Gonzalo J.; Ronco, Michele

2018-05-01

Relaxing the Riemannian condition to incorporate geometric quantities such as torsion and non-metricity may allow to explore new physics associated with defects in a hypothetical space-time microstructure. Here we show that non-metricity produces observable effects in quantum fields in the form of 4-fermion contact interactions, thereby allowing us to constrain the scale of non-metricity to be greater than 1 TeV by using results on Bahbah scattering. Our analysis is carried out in the framework of a wide class of theories of gravity in the metric-affine approach. The bound obtained represents an improvement of several orders of magnitude to previous experimental constraints.

Relationship between Journal-Ranking Metrics for a Multidisciplinary Set of Journals

Science.gov (United States)

Perera, Upeksha; Wijewickrema, Manjula

2018-01-01

Ranking of scholarly journals is important to many parties. Studying the relationships among various ranking metrics is key to understanding the significance of one metric based on another. This research investigates the relationship among four major journal-ranking indicators: the impact factor (IF), the Eigenfactor score (ES), the "h."…

The use of probabilistic safety assessment (PSA) based maintenance indicators to increase the availability of safety related systems in nuclear power plants

International Nuclear Information System (INIS)

Kirchsteiger, C.

1991-04-01

This work describes the theoretical development of a Probabilistic Safety Assessment (PSA) based Performance Indicator (PI) model for a comprehensive Maintenance Efficiency Analysis (MEA) and its practical application to past operational history data of a certain nuclear power plant. Plant specific equipment history and maintenance work on data have been collected and analysed using various advanced statistical procedures (nonparametric methods, multivariate analysis in order to be able to estimate safety system related equipment and maintenance process trends. The main results of such a MEA case study are the trends in the (in)effectiveness of the performance of a selected safety system and its dominant components as well as the detection of the dominant maintenance related causes of its bad (good) equipment performance. Finally, the therefrom gained results are used to propose a new set of safety system-based and maintenance-related performance indicators, including suggestions for a corresponding plant specific maintenance data collection system. (author)

Disturbance metrics predict a wetland Vegetation Index of Biotic Integrity

Science.gov (United States)

Stapanian, Martin A.; Mack, John; Adams, Jean V.; Gara, Brian; Micacchion, Mick

2013-01-01

Indices of biological integrity of wetlands based on vascular plants (VIBIs) have been developed in many areas in the USA. Knowledge of the best predictors of VIBIs would enable management agencies to make better decisions regarding mitigation site selection and performance monitoring criteria. We use a novel statistical technique to develop predictive models for an established index of wetland vegetation integrity (Ohio VIBI), using as independent variables 20 indices and metrics of habitat quality, wetland disturbance, and buffer area land use from 149 wetlands in Ohio, USA. For emergent and forest wetlands, predictive models explained 61% and 54% of the variability, respectively, in Ohio VIBI scores. In both cases the most important predictor of Ohio VIBI score was a metric that assessed habitat alteration and development in the wetland. Of secondary importance as a predictor was a metric that assessed microtopography, interspersion, and quality of vegetation communities in the wetland. Metrics and indices assessing disturbance and land use of the buffer area were generally poor predictors of Ohio VIBI scores. Our results suggest that vegetation integrity of emergent and forest wetlands could be most directly enhanced by minimizing substrate and habitat disturbance within the wetland. Such efforts could include reducing or eliminating any practices that disturb the soil profile, such as nutrient enrichment from adjacent farm land, mowing, grazing, or cutting or removing woody plants.

Safety Performance Indicator for alcohol in road accidents--international comparison, validity and data quality.

Science.gov (United States)

Assum, Terje; Sørensen, Michael

2010-03-01

Safety Performance Indicators, SPIs, are developed for various areas within road safety such as speed, car occupant protection, alcohol and drugs, vehicle safety, etc. SPIs can be used to indicate the road safety situation and to compare road safety performance between countries and over time and to understand the process leading to accidents, helping to select the measures to reduce them. This article describes an alcohol SPI defined as the percentage of fatalities resulting from accidents involving at least one driver impaired by alcohol. The calculation of the alcohol SPI for 26 European countries shows that the SPI varies from 4.4% in Bulgaria to 72.2% in Italy. These results raise the question if the results reflect the real situation or if there is a methodological explanation. To answer this question three different studies were carried out: comparison with other alcohol SPIs, in-depth studies of data quality in seven selected countries, and a study of correlations between the SPI and influencing factors. These studies indicate clearly that there is a need to improve quality of the data used for the alcohol SPI. Most importantly, the total number of drivers involved in fatal accidents, the number tested for alcohol and the number not tested, should be reported, in addition to the number of alcohol positive and negative drivers among those tested. Until these improvements are made, the validity of this SPI seems poor and comparison of the alcohol SPI results across countries should be made with caution. Copyright 2009 Elsevier Ltd. All rights reserved.

[Quality of care and safety indicators in anticoagulated patients with non-valvular auricular fibrillation and deep venous thromboembolic disease].

Science.gov (United States)

Ignacio, E; Mira, J J; Campos, F J; López de Sá, E; Lorenzo, A; Caballero, F

2018-03-19

To identify and prioritise indicators to assess the quality of care and safety of patients with non-valvular auricular fibrillation (NVAF) and deep vein thrombosis (DVT) treated with anticoagulants. Using the consensus conference technique, a group of professionals and clinical experts, the determining factors of the NVAF and DVT care process were identified, in order to define the quality and safety criteria. A proposal was made for indicators of quality and safety that were prioritised, taking into account a series of pre-established attributes. The selected indicators were classified into indicators of context, safety, action, and outcomes of the intervention in the patient. A set of 114 health care and safety quality indicators were identified, of which 35 were prioritised: 15 for NVAF and 20 for DVT. About half (49%) of the indicators (40% for NVAF and 55% for DVT) applied to patient safety, and 26% (33% for NVAF and 20% for DVT) to the outcomes of interventions in the patient. The present work presents a set of agreed indicators by a group of expert professionals that can contribute to the improvement of the quality of care of patients with NVAF and DVT treated with anticoagulants. Copyright © 2018 SECA. Publicado por Elsevier España, S.L.U. All rights reserved.

Key Performance Indicators in the Evaluation of the Quality of Radiation Safety Programs.

Science.gov (United States)

Schultz, Cheryl Culver; Shaffer, Sheila; Fink-Bennett, Darlene; Winokur, Kay

2016-08-01

Beaumont is a multiple hospital health care system with a centralized radiation safety department. The health system operates under a broad scope Nuclear Regulatory Commission license but also maintains several other limited use NRC licenses in off-site facilities and clinics. The hospital-based program is expansive including diagnostic radiology and nuclear medicine (molecular imaging), interventional radiology, a comprehensive cardiovascular program, multiple forms of radiation therapy (low dose rate brachytherapy, high dose rate brachytherapy, external beam radiotherapy, and gamma knife), and the Research Institute (including basic bench top, human and animal). Each year, in the annual report, data is analyzed and then tracked and trended. While any summary report will, by nature, include items such as the number of pieces of equipment, inspections performed, staff monitored and educated and other similar parameters, not all include an objective review of the quality and effectiveness of the program. Through objective numerical data Beaumont adopted seven key performance indicators. The assertion made is that key performance indicators can be used to establish benchmarks for evaluation and comparison of the effectiveness and quality of radiation safety programs. Based on over a decade of data collection, and adoption of key performance indicators, this paper demonstrates one way to establish objective benchmarking for radiation safety programs in the health care environment.

The effect of Health, Safety and Environment Management System (HSE-MS on the improvement of safety performance indices in Urea and Ammonia Kermanshah Petrochemical Company

Directory of Open Access Journals (Sweden)

M. S. Poursoleiman

2015-09-01

.Conclusion: The implementation of Health, Safety and the Environment Management System caused a reduction in accidents and its consequences and most of the safety performance indices in the entire process cycle of Kermanshah Petrochemical Company. Overall, safety condition has been improved considerably.

Indicators of the management for the continuous improvement of the radiological safety in a radioactive facility

International Nuclear Information System (INIS)

Amador B, Z. H.

2006-01-01

The use of safety indicators is common in the nuclear industry. In this work the implementation of indicators for the efficiency analysis of the radiological safety management system of a radioactive installation is presented. Through the same ones the occupational exposure, the training Y authorization of the personnel, the control of practices Y radioactive inventory, the results of the radiological surveillance, the occurrence of radiological events, the aptitude of the monitoring equipment, the management of the radioactive waste, the public exposure, the audits Y the costs of safety are evaluated. Its study is included in the periodic training of the workers. Without this interrelation it is not possible to maintain the optimization of the safety neither to achieve a continuous improvement. (Author)

The relative value of safety and performance indicators and qualitative arguments in different time frames

International Nuclear Information System (INIS)

Alonso, J.; Rohlig, K.J.; Batandjieva, B.; Griffault, L.; Regent, A.; Schneider, J.; Storck, R.; Umeki, H.

2002-01-01

Indicators complementary to dose or risk are of great importance for the provision of multiple lines of reasoning at different time frames and therefore for the building of confidence within a safety case and that regulations should acknowledge this fact. They are also of great value with regard to the understanding of the safety case by and the communication to different audiences. The relative value of such indicators changes with time. For longer timescales qualitative information becomes more important. The meaning of calculated dose or risk is different for different timescales (ranging from expected performance to illustration) but dose or risk remains a valuable and central information for any time considered in a Safety Assessment. Certain indicators (concentrations and fluxes) can provide information by avoiding certain uncertainties which increase remarkably with time (biosphere, dilution) but apart from that no generic opinion or recommendation can be derived since the value of specific indicators and the required degree of aggregation (over different nuclides or even of consequence and probability) strongly depends on the many parameter. (authors)

Metric diffusion along foliations

CERN Document Server

Walczak, Szymon M

2017-01-01

Up-to-date research in metric diffusion along compact foliations is presented in this book. Beginning with fundamentals from the optimal transportation theory and the theory of foliations; this book moves on to cover Wasserstein distance, Kantorovich Duality Theorem, and the metrization of the weak topology by the Wasserstein distance. Metric diffusion is defined, the topology of the metric space is studied and the limits of diffused metrics along compact foliations are discussed. Essentials on foliations, holonomy, heat diffusion, and compact foliations are detailed and vital technical lemmas are proved to aide understanding. Graduate students and researchers in geometry, topology and dynamics of foliations and laminations will find this supplement useful as it presents facts about the metric diffusion along non-compact foliation and provides a full description of the limit for metrics diffused along foliation with at least one compact leaf on the two dimensions.

MJO simulation in CMIP5 climate models: MJO skill metrics and process-oriented diagnosis

Science.gov (United States)

Ahn, Min-Seop; Kim, Daehyun; Sperber, Kenneth R.; Kang, In-Sik; Maloney, Eric; Waliser, Duane; Hendon, Harry

2017-12-01

The Madden-Julian Oscillation (MJO) simulation diagnostics developed by MJO Working Group and the process-oriented MJO simulation diagnostics developed by MJO Task Force are applied to 37 Coupled Model Intercomparison Project phase 5 (CMIP5) models in order to assess model skill in representing amplitude, period, and coherent eastward propagation of the MJO, and to establish a link between MJO simulation skill and parameterized physical processes. Process-oriented diagnostics include the Relative Humidity Composite based on Precipitation (RHCP), Normalized Gross Moist Stability (NGMS), and the Greenhouse Enhancement Factor (GEF). Numerous scalar metrics are developed to quantify the results. Most CMIP5 models underestimate MJO amplitude, especially when outgoing longwave radiation (OLR) is used in the evaluation, and exhibit too fast phase speed while lacking coherence between eastward propagation of precipitation/convection and the wind field. The RHCP-metric, indicative of the sensitivity of simulated convection to low-level environmental moisture, and the NGMS-metric, indicative of the efficiency of a convective atmosphere for exporting moist static energy out of the column, show robust correlations with a large number of MJO skill metrics. The GEF-metric, indicative of the strength of the column-integrated longwave radiative heating due to cloud-radiation interaction, is also correlated with the MJO skill metrics, but shows relatively lower correlations compared to the RHCP- and NGMS-metrics. Our results suggest that modifications to processes associated with moisture-convection coupling and the gross moist stability might be the most fruitful for improving simulations of the MJO. Though the GEF-metric exhibits lower correlations with the MJO skill metrics, the longwave radiation feedback is highly relevant for simulating the weak precipitation anomaly regime that may be important for the establishment of shallow convection and the transition to deep convection.

Fault Management Metrics

Science.gov (United States)

Johnson, Stephen B.; Ghoshal, Sudipto; Haste, Deepak; Moore, Craig

2017-01-01

This paper describes the theory and considerations in the application of metrics to measure the effectiveness of fault management. Fault management refers here to the operational aspect of system health management, and as such is considered as a meta-control loop that operates to preserve or maximize the system's ability to achieve its goals in the face of current or prospective failure. As a suite of control loops, the metrics to estimate and measure the effectiveness of fault management are similar to those of classical control loops in being divided into two major classes: state estimation, and state control. State estimation metrics can be classified into lower-level subdivisions for detection coverage, detection effectiveness, fault isolation and fault identification (diagnostics), and failure prognosis. State control metrics can be classified into response determination effectiveness and response effectiveness. These metrics are applied to each and every fault management control loop in the system, for each failure to which they apply, and probabilistically summed to determine the effectiveness of these fault management control loops to preserve the relevant system goals that they are intended to protect.

Completion of a Dislocated Metric Space

Directory of Open Access Journals (Sweden)

P. Sumati Kumari

2015-01-01

Full Text Available We provide a construction for the completion of a dislocated metric space (abbreviated d-metric space; we also prove that the completion of the metric associated with a d-metric coincides with the metric associated with the completion of the d-metric.

Canadian Association of Gastroenterology consensus guidelines on safety and quality indicators in endoscopy.

Science.gov (United States)

Armstrong, David; Barkun, Alan; Bridges, Ron; Carter, Rose; de Gara, Chris; Dube, Catherine; Enns, Robert; Hollingworth, Roger; Macintosh, Donald; Borgaonkar, Mark; Forget, Sylviane; Leontiadis, Grigorios; Meddings, Jonathan; Cotton, Peter; Kuipers, Ernst J

2012-01-01

Increasing use of gastrointestinal endoscopy, particularly for colorectal cancer screening, and increasing emphasis on health care quality, highlight the need for clearly defined, evidence-based processes to support quality improvement in endoscopy. To identify processes and indicators of quality and safety relevant to high-quality endoscopy service delivery. A multidisciplinary group of 35 voting participants developed recommendation statements and performance indicators. Systematic literature searches generated 50 initial statements that were revised iteratively following a modified Delphi approach using a web-based evaluation and voting tool. Statement development and evidence evaluation followed the AGREE (Appraisal of Guidelines, REsearch and Evaluation) and GRADE (Grading of Recommendations, Assessment, Development and Evaluation) guidelines. At the consensus conference, participants voted anonymously on all statements using a 6-point scale. Subsequent web-based voting evaluated recommendations for specific, individual quality indicators, safety indicators and mandatory endoscopy reporting fields. Consensus was defined a priori as agreement by 80% of participants. Consensus was reached on 23 recommendation statements addressing the following: ethics (statement 1: agreement 100%), facility standards and policies (statements 2 to 9: 90% to 100%), quality assurance (statements 10 to 13: 94% to 100%), training, education, competency and privileges (statements 14 to 19: 97% to 100%), endoscopy reporting standards (statements 20 and 21: 97% to 100%) and patient perceptions (statements 22 and 23: 100%). Additionally, 18 quality indicators (agreement 83% to 100%), 20 safety indicators (agreement 77% to 100%) and 23 recommended endoscopy-reporting elements (agreement 91% to 100%) were identified. The consensus process identified a clear need for high-quality clinical and outcomes research to support quality improvement in the delivery of endoscopy services. The

Summary report on the use of plant safety performance indicators

International Nuclear Information System (INIS)

2001-09-01

In 1998, the OECD/NEA committee on Nuclear Regulatory Activities (CNRA) initiated an activity with the objective of advancing the discussion on how to enhance and measure regulatory effectiveness in relation to nuclear installations. One of the outcome of this activity was to establish a Task group to develop internal (direct) performance indicators which would be used to monitor regulatory efficiency. In parallel, a joint CNRA/CSNI group was launched in December 2000 to exchange information and develop external (indirect) indicators to measure regulatory effectiveness, i.e. impact on licensee's safety performance. These external indicators are, in other words, the traditional plant performance indicators (PI's) and these are the ones that this report deals with. This report presents the work performed by the joint CNRA/CSNI task group mentioned above. It provides a summary of the sets of PI's being used by different regulatory bodies and WANO, it describes the national practices on the use of PI's and proposes a set of PI's that could be used nationally describing regulatory effectiveness and also as a basis for an international system. The task force consisted of regulators, organisations which have a performance indicators system in operation or under testing. The task force met in Paris on February 19-20, 2001. Each participant provided a brief description of the PI System at his organisation and its usage. The group identified a list of PI's that are recommended to be used nationally by regulators. This paper has been elaborated based on the information exchanged and discussions held in the February meeting. The participating countries (Spain, Finland, US, Sweden) and WANO were asked to provide an overview of systems in use. The presently used Performance Indicators were reviewed in a three steps process. 1. First indicators used in at least two agencies were identified. 2. The second step was to identify the most used indicators. 3. The third step was to

Metrics with vanishing quantum corrections

International Nuclear Information System (INIS)

Coley, A A; Hervik, S; Gibbons, G W; Pope, C N

2008-01-01

We investigate solutions of the classical Einstein or supergravity equations that solve any set of quantum corrected Einstein equations in which the Einstein tensor plus a multiple of the metric is equated to a symmetric conserved tensor T μν (g αβ , ∂ τ g αβ , ∂ τ ∂ σ g αβ , ...,) constructed from sums of terms, the involving contractions of the metric and powers of arbitrary covariant derivatives of the curvature tensor. A classical solution, such as an Einstein metric, is called universal if, when evaluated on that Einstein metric, T μν is a multiple of the metric. A Ricci flat classical solution is called strongly universal if, when evaluated on that Ricci flat metric, T μν vanishes. It is well known that pp-waves in four spacetime dimensions are strongly universal. We focus attention on a natural generalization; Einstein metrics with holonomy Sim(n - 2) in which all scalar invariants are zero or constant. In four dimensions we demonstrate that the generalized Ghanam-Thompson metric is weakly universal and that the Goldberg-Kerr metric is strongly universal; indeed, we show that universality extends to all four-dimensional Sim(2) Einstein metrics. We also discuss generalizations to higher dimensions

Measurement tools and process indicators of patient safety culture in primary care. A mixed methods study by the LINNEAUS collaboration on patient safety in primary care

Science.gov (United States)

Parker, Dianne; Wensing, Michel; Esmail, Aneez; Valderas, Jose M

2015-01-01

ABSTRACT Background: There is little guidance available to healthcare practitioners about what tools they might use to assess the patient safety culture. Objective: To identify useful tools for assessing patient safety culture in primary care organizations in Europe; to identify those aspects of performance that should be assessed when investigating the relationship between safety culture and performance in primary care. Methods: Two consensus-based studies were carried out, in which subject matter experts and primary healthcare professionals from several EU states rated (a) the applicability to their healthcare system of several existing safety culture assessment tools and (b) the appropriateness and usefulness of a range of potential indicators of a positive patient safety culture to primary care settings. The safety culture tools were field-tested in four countries to ascertain any challenges and issues arising when used in primary care. Results: The two existing tools that received the most favourable ratings were the Manchester patient safety framework (MaPsAF primary care version) and the Agency for healthcare research and quality survey (medical office version). Several potential safety culture process indicators were identified. The one that emerged as offering the best combination of appropriateness and usefulness related to the collection of data on adverse patient events. Conclusion: Two tools, one quantitative and one qualitative, were identified as applicable and useful in assessing patient safety culture in primary care settings in Europe. Safety culture indicators in primary care should focus on the processes rather than the outcomes of care. PMID:26339832

Remarks on G-Metric Spaces

Directory of Open Access Journals (Sweden)

Bessem Samet

2013-01-01

Full Text Available In 2005, Mustafa and Sims (2006 introduced and studied a new class of generalized metric spaces, which are called G-metric spaces, as a generalization of metric spaces. We establish some useful propositions to show that many fixed point theorems on (nonsymmetric G-metric spaces given recently by many authors follow directly from well-known theorems on metric spaces. Our technique can be easily extended to other results as shown in application.

Safety considerations in providing allergen immunotherapy in the office.

Science.gov (United States)

Mattos, Jose L; Lee, Stella

2016-06-01

This review highlights the risks of allergy immunotherapy, methods to improve the quality and safety of allergy treatment, the current status of allergy quality metrics, and the future of quality measurement. In the current healthcare environment, the emphasis on outcomes measurement is increasing, and providers must be better equipped in the development, measurement, and reporting of safety and quality measures. Immunotherapy offers the only potential cure for allergic disease and asthma. Although well tolerated and effective, immunotherapy can be associated with serious consequence, including anaphylaxis and death. Many predisposing factors and errors that lead to serious systemic reactions are preventable, and the evaluation and implementation of quality measures are crucial to developing a safe immunotherapy practice. Although quality metrics for immunotherapy are in their infancy, they will become increasingly sophisticated, and providers will face increased pressure to deliver safe, high-quality, patient-centered, evidence-based, and efficient allergy care. The establishment of safety in the allergy office involves recognition of potential risk factors for anaphylaxis, the development and measurement of quality metrics, and changing systems-wide practices if needed. Quality improvement is a continuous process, and although national allergy-specific quality metrics do not yet exist, they are in development.

Experiences with Software Quality Metrics in the EMI Middleware

CERN Multimedia

CERN. Geneva

2012-01-01

The EMI Quality Model has been created to define, and later review, the EMI (European Middleware Initiative) software product and process quality. A quality model is based on a set of software quality metrics and helps to set clear and measurable quality goals for software products and processes. The EMI Quality Model follows the ISO/IEC 9126 Software Engineering – Product Quality to identify a set of characteristics that need to be present in the EMI software. For each software characteristic, such as portability, maintainability, compliance, etc, a set of associated metrics and KPIs (Key Performance Indicators) are identified. This article presents how the EMI Quality Model and the EMI Metrics have been defined in the context of the software quality assurance activities carried out in EMI. It also describes the measurement plan and presents some of the metrics reports that have been produced for the EMI releases and updates. It also covers which tools and techniques can be used by any software project t...

Metric-adjusted skew information

DEFF Research Database (Denmark)

Liang, Cai; Hansen, Frank

2010-01-01

on a bipartite system and proved superadditivity of the Wigner-Yanase-Dyson skew informations for such states. We extend this result to the general metric-adjusted skew information. We finally show that a recently introduced extension to parameter values 1 ...We give a truly elementary proof of the convexity of metric-adjusted skew information following an idea of Effros. We extend earlier results of weak forms of superadditivity to general metric-adjusted skew information. Recently, Luo and Zhang introduced the notion of semi-quantum states...... of (unbounded) metric-adjusted skew information....

A guide to phylogenetic metrics for conservation, community ecology and macroecology

Science.gov (United States)

Cadotte, Marc W.; Carvalho, Silvia B.; Davies, T. Jonathan; Ferrier, Simon; Fritz, Susanne A.; Grenyer, Rich; Helmus, Matthew R.; Jin, Lanna S.; Mooers, Arne O.; Pavoine, Sandrine; Purschke, Oliver; Redding, David W.; Rosauer, Dan F.; Winter, Marten; Mazel, Florent

2016-01-01

ABSTRACT The use of phylogenies in ecology is increasingly common and has broadened our understanding of biological diversity. Ecological sub‐disciplines, particularly conservation, community ecology and macroecology, all recognize the value of evolutionary relationships but the resulting development of phylogenetic approaches has led to a proliferation of phylogenetic diversity metrics. The use of many metrics across the sub‐disciplines hampers potential meta‐analyses, syntheses, and generalizations of existing results. Further, there is no guide for selecting the appropriate metric for a given question, and different metrics are frequently used to address similar questions. To improve the choice, application, and interpretation of phylo‐diversity metrics, we organize existing metrics by expanding on a unifying framework for phylogenetic information. Generally, questions about phylogenetic relationships within or between assemblages tend to ask three types of question: how much; how different; or how regular? We show that these questions reflect three dimensions of a phylogenetic tree: richness, divergence, and regularity. We classify 70 existing phylo‐diversity metrics based on their mathematical form within these three dimensions and identify ‘anchor’ representatives: for α‐diversity metrics these are PD (Faith's phylogenetic diversity), MPD (mean pairwise distance), and VPD (variation of pairwise distances). By analysing mathematical formulae and using simulations, we use this framework to identify metrics that mix dimensions, and we provide a guide to choosing and using the most appropriate metrics. We show that metric choice requires connecting the research question with the correct dimension of the framework and that there are logical approaches to selecting and interpreting metrics. The guide outlined herein will help researchers navigate the current jungle of indices. PMID:26785932

A general theory of multimetric indices and their properties

Science.gov (United States)

Schoolmaster, Donald R.; Grace, James B.; Schweiger, E. William

2012-01-01

1. Stewardship of biological and ecological resources requires the ability to make integrative assessments of ecological integrity. One of the emerging methods for making such integrative assessments is multimetric indices (MMIs). These indices synthesize data, often from multiple levels of biological organization, with the goal of deriving a single index that reflects the overall effects of human disturbance. Despite the widespread use of MMIs, there is uncertainty about why this approach can be effective. An understanding of MMIs requires a quantitative theory that illustrates how the properties of candidate metrics relates to MMIs generated from those metrics. 2. We present the initial basis for such a theory by deriving the general mathematical characteristics of MMIs assembled from metrics. We then use the theory to derive quantitative answers to the following questions: Is there an optimal number of metrics to comprise an index? How does covariance among metrics affect the performance of the index derived from those metrics? And what are the criteria to decide whether a given metric will improve the performance of an index? 3. We find that the optimal number of metrics to be included in an index depends on the theoretical distribution of signal of the disturbance gradient contained in each metric. For example, if the rank-ordered parameters of a metric-disturbance regression can be described by a monotonically decreasing function, then an optimum number of metrics exists and can often be derived analytically. We derive the conditions by which adding a given metric can be expected to improve an index. 4. We find that the criterion defining such conditions depends nonlinearly of the signal of the disturbance gradient, the noise (error) of the metric and the correlation of the metric errors. Importantly, we find that correlation among metric errors increases the signal required for the metric to improve the index. 5. The theoretical framework presented in this

Software metrics: Software quality metrics for distributed systems. [reliability engineering

Science.gov (United States)

Post, J. V.

1981-01-01

Software quality metrics was extended to cover distributed computer systems. Emphasis is placed on studying embedded computer systems and on viewing them within a system life cycle. The hierarchy of quality factors, criteria, and metrics was maintained. New software quality factors were added, including survivability, expandability, and evolvability.

Benchmarking Global Food Safety Performances: The Era of Risk Intelligence.

Science.gov (United States)

Valleé, Jean-Charles Le; Charlebois, Sylvain

2015-10-01

Food safety data segmentation and limitations hamper the world's ability to select, build up, monitor, and evaluate food safety performance. Currently, there is no metric that captures the entire food safety system, and performance data are not collected strategically on a global scale. Therefore, food safety benchmarking is essential not only to help monitor ongoing performance but also to inform continued food safety system design, adoption, and implementation toward more efficient and effective food safety preparedness, responsiveness, and accountability. This comparative study identifies and evaluates common elements among global food safety systems. It provides an overall world ranking of food safety performance for 17 Organisation for Economic Co-Operation and Development (OECD) countries, illustrated by 10 indicators organized across three food safety risk governance domains: risk assessment (chemical risks, microbial risks, and national reporting on food consumption), risk management (national food safety capacities, food recalls, food traceability, and radionuclides standards), and risk communication (allergenic risks, labeling, and public trust). Results show all countries have very high food safety standards, but Canada and Ireland, followed by France, earned excellent grades relative to their peers. However, any subsequent global ranking study should consider the development of survey instruments to gather adequate and comparable national evidence on food safety.

Application of proximal surrogate indicators for safety evaluation: A review of recent developments and research needs

Directory of Open Access Journals (Sweden)

S.M. Sohel Mahmud

2017-12-01

Full Text Available Although there have been a number of recent reviews on the use of traffic conflict techniques (TCTs, none have focused on the use of proximal surrogate indicators. This paper comprehensively reviews the development and application of proximal surrogate safety indicators to address this gap. There is a particular focus on more recent advancements in the application of such indicators. For each of the main indicators reviewed, the paper provides a synthesis of the main guiding principles, as well as the most prominent features, including critical or threshold values used in the past. In addition, the main advantages and disadvantages of the reviewed indicators are highlighted. Finally, a number of research gaps are identified together with recommendations for potentially useful avenues of future research. Keywords: Safety evaluation, Traffic conflict, Surrogate, Proximal, Indicators

The metric system: An introduction

Science.gov (United States)

Lumley, Susan M.

On 13 Jul. 1992, Deputy Director Duane Sewell restated the Laboratory's policy on conversion to the metric system which was established in 1974. Sewell's memo announced the Laboratory's intention to continue metric conversion on a reasonable and cost effective basis. Copies of the 1974 and 1992 Administrative Memos are contained in the Appendix. There are three primary reasons behind the Laboratory's conversion to the metric system. First, Public Law 100-418, passed in 1988, states that by the end of fiscal year 1992 the Federal Government must begin using metric units in grants, procurements, and other business transactions. Second, on 25 Jul. 1991, President George Bush signed Executive Order 12770 which urged Federal agencies to expedite conversion to metric units. Third, the contract between the University of California and the Department of Energy calls for the Laboratory to convert to the metric system. Thus, conversion to the metric system is a legal requirement and a contractual mandate with the University of California. Public Law 100-418 and Executive Order 12770 are discussed in more detail later in this section, but first they examine the reasons behind the nation's conversion to the metric system. The second part of this report is on applying the metric system.

The metric system: An introduction

Energy Technology Data Exchange (ETDEWEB)

Lumley, S.M.

1995-05-01

On July 13, 1992, Deputy Director Duane Sewell restated the Laboratory`s policy on conversion to the metric system which was established in 1974. Sewell`s memo announced the Laboratory`s intention to continue metric conversion on a reasonable and cost effective basis. Copies of the 1974 and 1992 Administrative Memos are contained in the Appendix. There are three primary reasons behind the Laboratory`s conversion to the metric system. First, Public Law 100-418, passed in 1988, states that by the end of fiscal year 1992 the Federal Government must begin using metric units in grants, procurements, and other business transactions. Second, on July 25, 1991, President George Bush signed Executive Order 12770 which urged Federal agencies to expedite conversion to metric units. Third, the contract between the University of California and the Department of Energy calls for the Laboratory to convert to the metric system. Thus, conversion to the metric system is a legal requirement and a contractual mandate with the University of California. Public Law 100-418 and Executive Order 12770 are discussed in more detail later in this section, but first they examine the reasons behind the nation`s conversion to the metric system. The second part of this report is on applying the metric system.

Contrasting Various Metrics for Measuring Tropical Cyclone Activity

Directory of Open Access Journals (Sweden)

Jia-Yuh Yu Ping-Gin Chiu

2012-01-01

Full Text Available Popular metrics used for measuring the tropical cyclone (TC activity, including NTC (number of tropical cyclones, TCD (tropical cyclone days, ACE (accumulated cyclone energy, PDI (power dissipation index, along with two newly proposed indices: RACE (revised accumulated cyclone energy and RPDI (revised power dissipation index, are compared using the JTWC (Joint Typhoon Warning Center best-track data of TC over the western North Pacific basin. Our study shows that, while the above metrics have demonstrated various degrees of discrepancies, but in practical terms, they are all able to produce meaningful temporal and spatial changes in response to climate variability. Compared with the conventional ACE and PDI, RACE and RPDI seem to provide a more precise estimate of the total TC activity, especially in projecting the upswing trend of TC activity over the past few decades, simply because of a better approach in estimating TC wind energy. However, we would argue that there is still no need to find a ¡§universal¡¨ or ¡§best¡¨ metric for TC activity because different metrics are designed to stratify different aspects of TC activity, and whether the selected metric is appropriate or not should be determined solely by the purpose of study. Except for magnitude difference, the analysis results seem insensitive to the choice of the best-track datasets.

Attack-Resistant Trust Metrics

Science.gov (United States)

Levien, Raph

The Internet is an amazingly powerful tool for connecting people together, unmatched in human history. Yet, with that power comes great potential for spam and abuse. Trust metrics are an attempt to compute the set of which people are trustworthy and which are likely attackers. This chapter presents two specific trust metrics developed and deployed on the Advogato Website, which is a community blog for free software developers. This real-world experience demonstrates that the trust metrics fulfilled their goals, but that for good results, it is important to match the assumptions of the abstract trust metric computation to the real-world implementation.

Toward a better comprehension of Lean metrics for research and product development management

DEFF Research Database (Denmark)

da Costa, Janaina Mascarenhas Hornos; Oehmen, Josef; Rebentisch, Eric

2014-01-01

This paper presents a compilation and empirical survey-based evaluation of the metrics most commonly used by program managers during product development management. This work is part of a bigger project of MIT, PMI and INCOSE. Three methodological procedures were applied: systematic literature...... review, focus-group discussions, and survey. The survey results indicate the metrics considered to be the most and least useful for managing lean engineering programs, and reveals a shift of interest towards qualitative metrics, especially the ones that address the achievement of stakeholder values......, and the absence of useful metrics regarding the lean principles People and Pull....

Symmetries of the dual metrics

International Nuclear Information System (INIS)

Baleanu, D.

1998-01-01

The geometric duality between the metric g μν and a Killing tensor K μν is studied. The conditions were found when the symmetries of the metric g μν and the dual metric K μν are the same. Dual spinning space was constructed without introduction of torsion. The general results are applied to the case of Kerr-Newmann metric

[A set of quality and safety indicators for hospitals of the "Agencia Valenciana de Salud"].

Science.gov (United States)

Nebot-Marzal, C M; Mira-Solves, J J; Guilabert-Mora, M; Pérez-Jover, V; Pablo-Comeche, D; Quirós-Morató, T; Cuesta Peredo, D

2014-01-01

To prepare a set of quality and safety indicators for Hospitals of the «Agencia Valenciana de Salud». The qualitative technique Metaplan® was applied in order to gather proposals on sustainability and nursing. The catalogue of the «Spanish Society of Quality in Healthcare» was adopted as a starting point for clinical indicators. Using the Delphi technique, 207 professionals were invited to participate in the selecting the most reliable and feasible indicators. Lastly, the resulting proposal was validated with the managers of 12 hospitals, taking into account the variability, objectivity, feasibility, reliability and sensitivity, of the indicators. Participation rates varied between 66.67% and 80.71%. Of the 159 initial indicators, 68 were prioritized and selected (21 economic or management indicators, 22 nursing indicators, and 25 clinical or hospital indicators). Three of them were common to all three categories and two did not match the specified criteria during the validation phase, thus obtaining a final catalogue of 63 indicators. A set of quality and safety indicators for Hospitals was prepared. They are currently being monitored using the hospital information systems. Copyright © 2013 SECA. Published by Elsevier Espana. All rights reserved.

Metric-based approach and tool for modeling the I and C system using Markov chains

International Nuclear Information System (INIS)

Butenko, Valentyna; Kharchenko, Vyacheslav; Odarushchenko, Elena; Butenko, Dmitriy

2015-01-01

Markov's chains (MC) are well-know and widely applied in dependability and performability analysis of safety-critical systems, because of the flexible representation of system components dependencies and synchronization. There are few radblocks for greater application of the MC: accounting the additional system components increases the model state-space and complicates analysis; the non-numerically sophisticated user may find it difficult to decide between the variety of numerical methods to determine the most suitable and accurate for their application. Thus obtaining the high accurate and trusted modeling results becomes a nontrivial task. In this paper, we present the metric-based approach for selection of the applicable solution approach, based on the analysis of MCs stiffness, decomposability, sparsity and fragmentedness. Using this selection procedure the modeler can provide the verification of earlier obtained results. The presented approach was implemented in utility MSMC, which supports the MC construction, metric-based analysis, recommendations shaping and model solution. The model can be exported to the wall-known off-the-shelf mathematical packages for verification. The paper presents the case study of the industrial NPP I and C system, manufactured by RPC Radiy. The paper shows an application of metric-based approach and MSMC fool for dependability and safety analysis of RTS, and procedure of results verification. (author)

Test and Evaluation Metrics of Crew Decision-Making And Aircraft Attitude and Energy State Awareness

Science.gov (United States)

Bailey, Randall E.; Ellis, Kyle K. E.; Stephens, Chad L.

2013-01-01

NASA has established a technical challenge, under the Aviation Safety Program, Vehicle Systems Safety Technologies project, to improve crew decision-making and response in complex situations. The specific objective of this challenge is to develop data and technologies which may increase a pilot's (crew's) ability to avoid, detect, and recover from adverse events that could otherwise result in accidents/incidents. Within this technical challenge, a cooperative industry-government research program has been established to develop innovative flight deck-based counter-measures that can improve the crew's ability to avoid, detect, mitigate, and recover from unsafe loss-of-aircraft state awareness - specifically, the loss of attitude awareness (i.e., Spatial Disorientation, SD) or the loss-of-energy state awareness (LESA). A critical component of this research is to develop specific and quantifiable metrics which identify decision-making and the decision-making influences during simulation and flight testing. This paper reviews existing metrics and methods for SD testing and criteria for establishing visual dominance. The development of Crew State Monitoring technologies - eye tracking and other psychophysiological - are also discussed as well as emerging new metrics for identifying channelized attention and excessive pilot workload, both of which have been shown to contribute to SD/LESA accidents or incidents.

Metrics for measuring distances in configuration spaces

International Nuclear Information System (INIS)

Sadeghi, Ali; Ghasemi, S. Alireza; Schaefer, Bastian; Mohr, Stephan; Goedecker, Stefan; Lill, Markus A.

2013-01-01

In order to characterize molecular structures we introduce configurational fingerprint vectors which are counterparts of quantities used experimentally to identify structures. The Euclidean distance between the configurational fingerprint vectors satisfies the properties of a metric and can therefore safely be used to measure dissimilarities between configurations in the high dimensional configuration space. In particular we show that these metrics are a perfect and computationally cheap replacement for the root-mean-square distance (RMSD) when one has to decide whether two noise contaminated configurations are identical or not. We introduce a Monte Carlo approach to obtain the global minimum of the RMSD between configurations, which is obtained from a global minimization over all translations, rotations, and permutations of atomic indices

Resilience-based performance metrics for water resources management under uncertainty

Science.gov (United States)

Roach, Tom; Kapelan, Zoran; Ledbetter, Ralph

2018-06-01

This paper aims to develop new, resilience type metrics for long-term water resources management under uncertain climate change and population growth. Resilience is defined here as the ability of a water resources management system to 'bounce back', i.e. absorb and then recover from a water deficit event, restoring the normal system operation. Ten alternative metrics are proposed and analysed addressing a range of different resilience aspects including duration, magnitude, frequency and volume of related water deficit events. The metrics were analysed on a real-world case study of the Bristol Water supply system in the UK and compared with current practice. The analyses included an examination of metrics' sensitivity and correlation, as well as a detailed examination into the behaviour of metrics during water deficit periods. The results obtained suggest that multiple metrics which cover different aspects of resilience should be used simultaneously when assessing the resilience of a water resources management system, leading to a more complete understanding of resilience compared with current practice approaches. It was also observed that calculating the total duration of a water deficit period provided a clearer and more consistent indication of system performance compared to splitting the deficit periods into the time to reach and time to recover from the worst deficit events.

Overview of journal metrics

Directory of Open Access Journals (Sweden)

Kihong Kim

2018-02-01

Full Text Available Various kinds of metrics used for the quantitative evaluation of scholarly journals are reviewed. The impact factor and related metrics including the immediacy index and the aggregate impact factor, which are provided by the Journal Citation Reports, are explained in detail. The Eigenfactor score and the article influence score are also reviewed. In addition, journal metrics such as CiteScore, Source Normalized Impact per Paper, SCImago Journal Rank, h-index, and g-index are discussed. Limitations and problems that these metrics have are pointed out. We should be cautious to rely on those quantitative measures too much when we evaluate journals or researchers.

Serious injuries: an additional indicator to fatalities for road safety benchmarking.

Science.gov (United States)

Shen, Yongjun; Hermans, Elke; Bao, Qiong; Brijs, Tom; Wets, Geert

2015-01-01

Almost all of the current road safety benchmarking studies focus entirely on fatalities, which, however, represent only one measure of the magnitude of the road safety problem. The main objective of this article was to investigate the possibility of including the number of serious injuries in addition to the number of fatalities for road safety benchmarking and to further illuminate its impact on the countries' rankings. We introduced the technique of data envelopment analysis (DEA) to the road safety domain and developed a DEA-based road safety model (DEA-RS) in this study. Moreover, we outlined different types of possible weight restrictions and adopted 2 of them to indicate the relationship between road fatalities and serious injuries for the sake of rational benchmarking. One was a relative weight restriction based on the information of their shadow price, and the other was a virtual weight restriction using a priori knowledge about the importance level of these 2 aspects. By computing the most optimal road safety risk scores of 10 European countries based on the different models, we found that United Kingdom was the only best-performing country no matter which model was utilized. However, countries such as The Netherlands, Sweden, and Switzerland were no longer best-performing when the serious injuries were integrated. On the contrary, Spain, which ranked almost at the bottom among all of the countries when only the number of road fatalities was considered, became a relatively well-performing country when integrating its number of serious injuries in the evaluation. In general, no matter whether the country's road safety ranking was improved or deteriorated, most of the countries achieved a higher risk score when the number of serious injuries was included, which implied that compared to the road fatalities, more policy attention has to be paid to improve the situation of serious injuries in most countries. Given the importance of considering the serious

Implementation of an indicator-based safety management system for the EnKK NPP's

International Nuclear Information System (INIS)

Bassing, G.; Nasellu, M.; Ritter, J.

2004-01-01

This presentation at the Eurosafe Berlin 2004 will give an overview of the activities on safety management of EnBW Kernkraft GmbH taken up with a notifiable event in August 2001 at KKP 2 nuclear site. After this event EnBW announced the development and introduction of an indicator-based safety management system (SMS) at all sites of its nuclear power plants. A SMS team with members from all NPP sites was built which had to analyse all processes based on the DIN EN ISO 9000 philosophy and to control them by indicators. The regulatory authorities and their experts would accompany this process in a suitable fashion and monitor and review it after its introduction. This presentation shows the process during the development of the system, the status of its introduction and the general involvement of the regulator. (orig.)

Application of non-dose/risk indicators for confidence-building in the H12 safety assessment

International Nuclear Information System (INIS)

Miyahara, K.; Makino, H.; Takasu, A.; Naito, M.; Umeke, H.; Wakasugi, K.; Ishiguro, K.

2002-01-01

In the H12 study, non-dose/risk safety indicators have also been considered with a view to increasing confidence in the safety assessment. The H12 safety assessment considers system evolution for a range of scenarios; not only normal groundwater scenarios but also isolation failure scenarios due to unlikely natural disruptive events. The calculated nuclide concentrations and fluxes in the surface environment for the reference groundwater scenario were compared with measurements of naturally occurring nuclides. This comparison indicated that the concentration and fluxes of radionuclides released from the repository would be several orders of magnitude lower than those of natural radionuclides. There may exist cases, such as some natural disruptive events, where the likelihood of occurrence is extremely low and the 'Reference Biosphere' approach is difficult to be applied for biosphere modelling. The use of qualitative assessment to allow comparison with naturally occurring nuclides based on observations of natural systems may play a role in supporting the robustness of the system concept. These examples suggest that relevant application of these non-dose/risk indicators supports a more robust case. An advantage to applying such indicators is that both technical and non-technical audiences can judge the relative, long-term impact of a deep geological repository. (author)

Using community-level metrics to monitor the effects of marine protected areas on biodiversity.

Science.gov (United States)

Soykan, Candan U; Lewison, Rebecca L

2015-06-01

Marine protected areas (MPAs) are used to protect species, communities, and their associated habitats, among other goals. Measuring MPA efficacy can be challenging, however, particularly when considering responses at the community level. We gathered 36 abundance and 14 biomass data sets on fish assemblages and used meta-analysis to evaluate the ability of 22 distinct community diversity metrics to detect differences in community structure between MPAs and nearby control sites. We also considered the effects of 6 covariates-MPA size and age, MPA size and age interaction, latitude, total species richness, and level of protection-on each metric. Some common metrics, such as species richness and Shannon diversity, did not differ consistently between MPA and control sites, whereas other metrics, such as total abundance and biomass, were consistently different across studies. Metric responses derived from the biomass data sets were more consistent than those based on the abundance data sets, suggesting that community-level biomass differs more predictably than abundance between MPA and control sites. Covariate analyses indicated that level of protection, latitude, MPA size, and the interaction between MPA size and age affect metric performance. These results highlight a handful of metrics, several of which are little known, that could be used to meet the increasing demand for community-level indicators of MPA effectiveness. © 2015 Society for Conservation Biology.

Exploring the state of health and safety management system performance measurement in mining organizations.

Science.gov (United States)

Haas, Emily Joy; Yorio, Patrick

2016-03-01

Complex arguments continue to be articulated regarding the theoretical foundation of health and safety management system (HSMS) performance measurement. The culmination of these efforts has begun to enhance a collective understanding. Despite this enhanced theoretical understanding, however, there are still continuing debates and little consensus. The goal of the current research effort was to empirically explore common methods to HSMS performance measurement in mining organizations. The purpose was to determine if value and insight could be added into the ongoing approaches of the best ways to engage in health and safety performance measurement. Nine site-level health and safety management professionals were provided with 133 practices corresponding to 20 HSMS elements, each fitting into the plan, do, check, act phases common to most HSMS. Participants were asked to supply detailed information as to how they (1) assess the performance of each practice in their organization, or (2) would assess each practice if it were an identified strategic imperative. Qualitative content analysis indicated that the approximately 1200 responses provided could be described and categorized into interventions , organizational performance , and worker performance . A discussion of how these categories relate to existing indicator frameworks is provided. The analysis also revealed divergence in two important measurement issues; (1) quantitative vs qualitative measurement and reporting; and (2) the primary use of objective or subjective metrics. In lieu of these findings we ultimately recommend a balanced measurement and reporting approach within the three metric categories and conclude with suggestions for future research.

Holographic Spherically Symmetric Metrics

Science.gov (United States)

Petri, Michael

The holographic principle (HP) conjectures, that the maximum number of degrees of freedom of any realistic physical system is proportional to the system's boundary area. The HP has its roots in the study of black holes. It has recently been applied to cosmological solutions. In this article we apply the HP to spherically symmetric static space-times. We find that any regular spherically symmetric object saturating the HP is subject to tight constraints on the (interior) metric, energy-density, temperature and entropy-density. Whenever gravity can be described by a metric theory, gravity is macroscopically scale invariant and the laws of thermodynamics hold locally and globally, the (interior) metric of a regular holographic object is uniquely determined up to a constant factor and the interior matter-state must follow well defined scaling relations. When the metric theory of gravity is general relativity, the interior matter has an overall string equation of state (EOS) and a unique total energy-density. Thus the holographic metric derived in this article can serve as simple interior 4D realization of Mathur's string fuzzball proposal. Some properties of the holographic metric and its possible experimental verification are discussed. The geodesics of the holographic metric describe an isotropically expanding (or contracting) universe with a nearly homogeneous matter-distribution within the local Hubble volume. Due to the overall string EOS the active gravitational mass-density is zero, resulting in a coasting expansion with Ht = 1, which is compatible with the recent GRB-data.

Equilibrium thermodynamics and neutrino decoupling in quasi-metric cosmology

Science.gov (United States)

Østvang, Dag

2018-05-01

The laws of thermodynamics in the expanding universe are formulated within the quasi-metric framework. The quasi-metric cosmic expansion does not directly influence momenta of material particles, so the expansion directly cools null particles only (e.g., photons). Therefore, said laws differ substantially from their counterparts in standard cosmology. Consequently, all non-null neutrino mass eigenstates are predicted to have the same energy today as they had just after neutrino decoupling in the early universe. This indicates that the predicted relic neutrino background is strongly inconsistent with detection rates measured in solar neutrino detectors (Borexino in particular). Thus quasi-metric cosmology is in violent conflict with experiment unless some exotic property of neutrinos makes the relic neutrino background essentially undetectable (e.g., if all massive mass eigenstates decay into "invisible" particles over cosmic time scales). But in absence of hard evidence in favour of the necessary exotic neutrino physics needed to resolve said conflict, the current status of quasi-metric relativity has been changed to non-viable.

Operational safety performance indicator system - a management tool for the self assessment of safety and reliability of nuclear power plants

International Nuclear Information System (INIS)

Anil Kumar; Mandowara, S.L.; Mittal, S.

2006-01-01

Operational Safety Performance Indicator system is one of the self assessment tools for station management to monitor safety and reliability of nuclear power plants. It provides information to station management about the performance of various areas of the plants by means of different colours of relevant performance indicators. Such systems have been implemented at many nuclear power plants in the world and have been considered as strength during WANO Peer Review. IAEA had a Coordinated Research Programme (CRP) on this with several countries participating including India. In NPCIL this system has been implemented in KAPS about a year back and found very useful in identifying areas which needs to be given more attention. Based on the KAPS feedback Implementation of this system has been taken up in RAPS-3 and 4 and KGS-l and 2. (author)

Metrics for value creation in a sustainable knowledge society

Energy Technology Data Exchange (ETDEWEB)

Huovila, P., Email: pekka.huovila@vtt.fi

2012-06-15

This paper highlights the need to create potential value metrics for sustainable neighbourhoods, capable of working simultaneously at a variety of spatial scales for different stakeholders (multi-scalar reciprocity), moving from top-down imposed metrics towards bottom-up formulated ones. Metrics for Value Creation should be constituted using different approaches. One dimension is the built environment, where the present rating schemes focus on the environmental impact of the use of buildings, namely energy use. Another dimension is the corporate aspect, where triple bottom line reporting also emphasises environmental and social issues, but the discursive civic square environment risks domination by economic sustainability of the production and growth-oriented business environment. The third dimension is the city itself with its social networks, concerning indicators for employment and crime, for example. The fourth dimension aims to measure the quality of life of individual citizens, which is not easy to define. At present, all four approaches are used separately without interoperability between the systems. Current environmental rating schemes, such as BREEAM, CASBEE, Green Star, HQE, LEED, PromisE, etc. are able to structure the processes of setting objectives, monitoring the process and assessing the state of buildings by some simple indicators. Mostly they focus on resource use and environmental impacts, but also cover some performance parameters, such as indoor environmental quality or aspects of accessibility. However, they are not contributing to the objectives of value creation in a knowledge society. This paper discusses major limitations of current sustainability indicator sets and rating tools. Finally, it describes a new approach to value metrics for sustainable neighbourhoods, using the LivingLab approach. This is a user-centric multidisciplinary research approach and a user community-driven innovation based on real-life experiments. The benefits of

Complexity Management Using Metrics for Trajectory Flexibility Preservation and Constraint Minimization

Science.gov (United States)

Idris, Husni; Shen, Ni; Wing, David J.

2011-01-01

The growing demand for air travel is increasing the need for mitigating air traffic congestion and complexity problems, which are already at high levels. At the same time new surveillance, navigation, and communication technologies are enabling major transformations in the air traffic management system, including net-based information sharing and collaboration, performance-based access to airspace resources, and trajectory-based rather than clearance-based operations. The new system will feature different schemes for allocating tasks and responsibilities between the ground and airborne agents and between the human and automation, with potential capacity and cost benefits. Therefore, complexity management requires new metrics and methods that can support these new schemes. This paper presents metrics and methods for preserving trajectory flexibility that have been proposed to support a trajectory-based approach for complexity management by airborne or ground-based systems. It presents extensions to these metrics as well as to the initial research conducted to investigate the hypothesis that using these metrics to guide user and service provider actions will naturally mitigate traffic complexity. The analysis showed promising results in that: (1) Trajectory flexibility preservation mitigated traffic complexity as indicated by inducing self-organization in the traffic patterns and lowering traffic complexity indicators such as dynamic density and traffic entropy. (2)Trajectory flexibility preservation reduced the potential for secondary conflicts in separation assurance. (3) Trajectory flexibility metrics showed potential application to support user and service provider negotiations for minimizing the constraints imposed on trajectories without jeopardizing their objectives.

The relationship between settlement population size and sustainable development measured by two sustainability metrics

International Nuclear Information System (INIS)

O'Regan, Bernadette; Morrissey, John; Foley, Walter; Moles, Richard

2009-01-01

This paper reports on a study of the relative sustainability of 79 Irish villages, towns and a small city (collectively called 'settlements') classified by population size. Quantitative data on more than 300 economic, social and environmental attributes of each settlement were assembled into a database. Two aggregated metrics were selected to model the relative sustainability of settlements: Ecological Footprint (EF) and Sustainable Development Index (SDI). Subsequently these were aggregated to create a single Combined Sustainable Development Index. Creation of this database meant that metric calculations did not rely on proxies, and were therefore considered to be robust. Methods employed provided values for indicators at various stages of the aggregation process. This allowed both the first reported empirical analysis of the relationship between settlement sustainability and population size, and the elucidation of information provided at different stages of aggregation. At the highest level of aggregation, settlement sustainability increased with population size, but important differences amongst individual settlements were masked by aggregation. EF and SDI metrics ranked settlements in differing orders of relative sustainability. Aggregation of indicators to provide Ecological Footprint values was found to be especially problematic, and this metric was inadequately sensitive to distinguish amongst the relative sustainability achieved by all settlements. Many authors have argued that, for policy makers to be able to inform planning decisions using sustainability indicators, it is necessary that they adopt a toolkit of aggregated indicators. Here it is argued that to interpret correctly each aggregated metric value, policy makers also require a hierarchy of disaggregated component indicator values, each explained fully. Possible implications for urban planning are briefly reviewed

Metric regularity and subdifferential calculus

International Nuclear Information System (INIS)

Ioffe, A D

2000-01-01

The theory of metric regularity is an extension of two classical results: the Lyusternik tangent space theorem and the Graves surjection theorem. Developments in non-smooth analysis in the 1980s and 1990s paved the way for a number of far-reaching extensions of these results. It was also well understood that the phenomena behind the results are of metric origin, not connected with any linear structure. At the same time it became clear that some basic hypotheses of the subdifferential calculus are closely connected with the metric regularity of certain set-valued maps. The survey is devoted to the metric theory of metric regularity and its connection with subdifferential calculus in Banach spaces

Context-dependent ATC complexity metric

NARCIS (Netherlands)

Mercado Velasco, G.A.; Borst, C.

2015-01-01

Several studies have investigated Air Traffic Control (ATC) complexity metrics in a search for a metric that could best capture workload. These studies have shown how daunting the search for a universal workload metric (one that could be applied in different contexts: sectors, traffic patterns,

DLA Energy Biofuel Feedstock Metrics Study

Science.gov (United States)

2012-12-11

moderately/highly in- vasive  Metric 2: Genetically modified organism ( GMO ) hazard, Yes/No and Hazard Category  Metric 3: Species hybridization...4– biofuel distribution Stage # 5– biofuel use Metric 1: State inva- siveness ranking Yes Minimal Minimal No No Metric 2: GMO hazard Yes...may utilize GMO microbial or microalgae species across the applicable biofuel life cycles (stages 1–3). The following consequence Metrics 4–6 then

Reliability of TMS metrics in patients with chronic incomplete spinal cord injury.

Science.gov (United States)

Potter-Baker, K A; Janini, D P; Frost, F S; Chabra, P; Varnerin, N; Cunningham, D A; Sankarasubramanian, V; Plow, E B

2016-11-01

Test-retest reliability analysis in individuals with chronic incomplete spinal cord injury (iSCI). The purpose of this study was to examine the reliability of neurophysiological metrics acquired with transcranial magnetic stimulation (TMS) in individuals with chronic incomplete tetraplegia. Cleveland Clinic Foundation, Cleveland, Ohio, USA. TMS metrics of corticospinal excitability, output, inhibition and motor map distribution were collected in muscles with a higher MRC grade and muscles with a lower MRC grade on the more affected side of the body. Metrics denoting upper limb function were also collected. All metrics were collected at two sessions separated by a minimum of two weeks. Reliability between sessions was determined using Spearman's correlation coefficients and concordance correlation coefficients (CCCs). We found that TMS metrics that were acquired in higher MRC grade muscles were approximately two times more reliable than those collected in lower MRC grade muscles. TMS metrics of motor map output, however, demonstrated poor reliability regardless of muscle choice (P=0.34; CCC=0.51). Correlation analysis indicated that patients with more baseline impairment and/or those in a more chronic phase of iSCI demonstrated greater variability of metrics. In iSCI, reliability of TMS metrics varies depending on the muscle grade of the tested muscle. Variability is also influenced by factors such as baseline motor function and time post SCI. Future studies that use TMS metrics in longitudinal study designs to understand functional recovery should be cautious as choice of muscle and clinical characteristics can influence reliability.

Flightdeck Automation Problems (FLAP) Model for Safety Technology Portfolio Assessment

Science.gov (United States)

Ancel, Ersin; Shih, Ann T.

2014-01-01

NASA's Aviation Safety Program (AvSP) develops and advances methodologies and technologies to improve air transportation safety. The Safety Analysis and Integration Team (SAIT) conducts a safety technology portfolio assessment (PA) to analyze the program content, to examine the benefits and risks of products with respect to program goals, and to support programmatic decision making. The PA process includes systematic identification of current and future safety risks as well as tracking several quantitative and qualitative metrics to ensure the program goals are addressing prominent safety risks accurately and effectively. One of the metrics within the PA process involves using quantitative aviation safety models to gauge the impact of the safety products. This paper demonstrates the role of aviation safety modeling by providing model outputs and evaluating a sample of portfolio elements using the Flightdeck Automation Problems (FLAP) model. The model enables not only ranking of the quantitative relative risk reduction impact of all portfolio elements, but also highlighting the areas with high potential impact via sensitivity and gap analyses in support of the program office. Although the model outputs are preliminary and products are notional, the process shown in this paper is essential to a comprehensive PA of NASA's safety products in the current program and future programs/projects.

Symmetries of Taub-NUT dual metrics

International Nuclear Information System (INIS)

Baleanu, D.; Codoban, S.

1998-01-01

Recently geometric duality was analyzed for a metric which admits Killing tensors. An interesting example arises when the manifold has Killing-Yano tensors. The symmetries of the dual metrics in the case of Taub-NUT metric are investigated. Generic and non-generic symmetries of dual Taub-NUT metric are analyzed

Metric learning

CERN Document Server

Bellet, Aurelien; Sebban, Marc

2015-01-01

Similarity between objects plays an important role in both human cognitive processes and artificial systems for recognition and categorization. How to appropriately measure such similarities for a given task is crucial to the performance of many machine learning, pattern recognition and data mining methods. This book is devoted to metric learning, a set of techniques to automatically learn similarity and distance functions from data that has attracted a lot of interest in machine learning and related fields in the past ten years. In this book, we provide a thorough review of the metric learnin

Technical Privacy Metrics: a Systematic Survey

OpenAIRE

Wagner, Isabel; Eckhoff, David

2018-01-01

The file attached to this record is the author's final peer reviewed version The goal of privacy metrics is to measure the degree of privacy enjoyed by users in a system and the amount of protection offered by privacy-enhancing technologies. In this way, privacy metrics contribute to improving user privacy in the digital world. The diversity and complexity of privacy metrics in the literature makes an informed choice of metrics challenging. As a result, instead of using existing metrics, n...

Quality Metrics in Neonatal and Pediatric Critical Care Transport: A National Delphi Project.

Science.gov (United States)

Schwartz, Hamilton P; Bigham, Michael T; Schoettker, Pamela J; Meyer, Keith; Trautman, Michael S; Insoft, Robert M

2015-10-01

The transport of neonatal and pediatric patients to tertiary care facilities for specialized care demands monitoring the quality of care delivered during transport and its impact on patient outcomes. In 2011, pediatric transport teams in Ohio met to identify quality indicators permitting comparisons among programs. However, no set of national consensus quality metrics exists for benchmarking transport teams. The aim of this project was to achieve national consensus on appropriate neonatal and pediatric transport quality metrics. Modified Delphi technique. The first round of consensus determination was via electronic mail survey, followed by rounds of consensus determination in-person at the American Academy of Pediatrics Section on Transport Medicine's 2012 Quality Metrics Summit. All attendees of the American Academy of Pediatrics Section on Transport Medicine Quality Metrics Summit, conducted on October 21-23, 2012, in New Orleans, LA, were eligible to participate. Candidate quality metrics were identified through literature review and those metrics currently tracked by participating programs. Participants were asked in a series of rounds to identify "very important" quality metrics for transport. It was determined a priori that consensus on a metric's importance was achieved when at least 70% of respondents were in agreement. This is consistent with other Delphi studies. Eighty-two candidate metrics were considered initially. Ultimately, 12 metrics achieved consensus as "very important" to transport. These include metrics related to airway management, team mobilization time, patient and crew injuries, and adverse patient care events. Definitions were assigned to the 12 metrics to facilitate uniform data tracking among programs. The authors succeeded in achieving consensus among a diverse group of national transport experts on 12 core neonatal and pediatric transport quality metrics. We propose that transport teams across the country use these metrics to

On Information Metrics for Spatial Coding.

Science.gov (United States)

Souza, Bryan C; Pavão, Rodrigo; Belchior, Hindiael; Tort, Adriano B L

2018-04-01

The hippocampal formation is involved in navigation, and its neuronal activity exhibits a variety of spatial correlates (e.g., place cells, grid cells). The quantification of the information encoded by spikes has been standard procedure to identify which cells have spatial correlates. For place cells, most of the established metrics derive from Shannon's mutual information (Shannon, 1948), and convey information rate in bits/s or bits/spike (Skaggs et al., 1993, 1996). Despite their widespread use, the performance of these metrics in relation to the original mutual information metric has never been investigated. In this work, using simulated and real data, we find that the current information metrics correlate less with the accuracy of spatial decoding than the original mutual information metric. We also find that the top informative cells may differ among metrics, and show a surrogate-based normalization that yields comparable spatial information estimates. Since different information metrics may identify different neuronal populations, we discuss current and alternative definitions of spatially informative cells, which affect the metric choice. Copyright © 2018 IBRO. Published by Elsevier Ltd. All rights reserved.

Evaluation Metrics for Simulations of Tropical South America

Science.gov (United States)

Gallup, S.; Baker, I. T.; Denning, A. S.; Cheeseman, M.; Haynes, K. D.; Phillips, M.

2017-12-01

The evergreen broadleaf forest of the Amazon Basin is the largest rainforest on earth, and has teleconnections to global climate and carbon cycle characteristics. This region defies simple characterization, spanning large gradients in total rainfall and seasonal variability. Broadly, the region can be thought of as trending from light-limited in its wettest areas to water-limited near the ecotone, with individual landscapes possibly exhibiting the characteristics of either (or both) limitations during an annual cycle. A basin-scale classification of mean behavior has been elusive, and ecosystem response to seasonal cycles and anomalous drought events has resulted in some disagreement in the literature, to say the least. However, new observational platforms and instruments make characterization of the heterogeneity and variability more feasible.To evaluate simulations of ecophysiological function, we develop metrics that correlate various observational products with meteorological variables such as precipitation and radiation. Observations include eddy covariance fluxes, Solar Induced Fluorescence (SIF, from GOME2 and OCO2), biomass and vegetation indices. We find that the modest correlation between SIF and precipitation decreases with increasing annual precipitation, although the relationship is not consistent between products. Biomass increases with increasing precipitation. Although vegetation indices are generally correlated with biomass and precipitation, they can saturate or experience retrieval issues during cloudy periods.Using these observational products and relationships, we develop a set of model evaluation metrics. These metrics are designed to call attention to models that get "the right answer only if it's for the right reason," and provide an opportunity for more critical evaluation of model physics. These metrics represent a testbed that can be applied to multiple models as a means to evaluate their performance in tropical South America.

Generalized Painleve-Gullstrand metrics

Energy Technology Data Exchange (ETDEWEB)

Lin Chunyu [Department of Physics, National Cheng Kung University, Tainan 70101, Taiwan (China)], E-mail: l2891112@mail.ncku.edu.tw; Soo Chopin [Department of Physics, National Cheng Kung University, Tainan 70101, Taiwan (China)], E-mail: cpsoo@mail.ncku.edu.tw

2009-02-02

An obstruction to the implementation of spatially flat Painleve-Gullstrand (PG) slicings is demonstrated, and explicitly discussed for Reissner-Nordstroem and Schwarzschild-anti-deSitter spacetimes. Generalizations of PG slicings which are not spatially flat but which remain regular at the horizons are introduced. These metrics can be obtained from standard spherically symmetric metrics by physical Lorentz boosts. With these generalized PG metrics, problematic contributions to the imaginary part of the action in the Parikh-Wilczek derivation of Hawking radiation due to the obstruction can be avoided.

Project management metrics, KPIs, and dashboards a guide to measuring and monitoring project performance

CERN Document Server

Kerzner, Harold

2013-01-01

Today, with the growth of complex projects, stakeholder involvement in projects, advances in computer technology for dashboard designs, metrics, and key performance indicators for project management have become an important focus. This Second Edition of the bestselling book walks readers through everything from the basics of project management metrics and key performance indicators to establishing targets and using dashboards to monitor performance. The content is aligned with PMI's PMBOK Guide and stresses "value" as the main focal point.

Kerr metric in the deSitter background

International Nuclear Information System (INIS)

Vaidya, P.C.

1984-01-01

In addition to the Kerr metric with cosmological constant Λ several other metrics are presented giving a Kerr-like solution of Einstein's equations in the background of deSitter universe. A new metric of what may be termed as rotating deSitter space-time devoid of matter but containing null fluid with twisting null rays, has been presented. This metric reduces to the standard deSitter metric when the twist in the rays vanishes. Kerr metric in this background is the immediate generalization of Schwarzschild's exterior metric with cosmological constant. (author)

Kerr metric in cosmological background

Energy Technology Data Exchange (ETDEWEB)

Vaidya, P C [Gujarat Univ., Ahmedabad (India). Dept. of Mathematics

1977-06-01

A metric satisfying Einstein's equation is given which in the vicinity of the source reduces to the well-known Kerr metric and which at large distances reduces to the Robertson-Walker metric of a nomogeneous cosmological model. The radius of the event horizon of the Kerr black hole in the cosmological background is found out.

Culture of safety. Indicators of culture of safety. Stage of culture of safety. Optimization of radiating protection. Principle of precaution. Principle ALARA. Procedure ALARA

International Nuclear Information System (INIS)

Mursa, E.

2006-01-01

Object of research: is the theory and practice of optimization of radiating protection according to recommendations of the international organizations, realization of principle ALARA and maintenance of culture of safety (SC) on the nuclear power plant. The purpose of work - to consider the general aspects of realization of principle ALARA, conceptual bases of culture of safety, as principle of management, and practice of their introduction on the nuclear power plant. The work has the experts' report character in which the following questions are presented: The recommendations materials of the IAEA and other international organizations have been assembled, systematized and analyzed. The definitions, characteristics and universal SC features, and also indicators as a problem of parameters and quantitative SC measurements are described in details advanced. The ALARA principles - principle of precaution; not acceptance of zero risk; choice of a principle ALARA; model of acceptable radiation risk are described. The methodology of an estimation of culture of safety level and practical realization of the ALARA principle in separate organization is shown on a practical example. The SC general estimation at a national level in Republic of Moldova have been done. Taking into consideration that now Safety Culture politics are introduced only in relation to APS, in this paper the attempt of application of Safety Culture methodology to Radiological Objects have been made (Oncological Institute of the Republic of Moldova and Special Objects No.5101 and 5102 for a long time Storage of the Radioactive Waste). (authors)

Development of 4S and related technologies. (3) Statistical evaluation of safety performance of 4S on ULOF event

International Nuclear Information System (INIS)

Ishii, Kyoko; Matsumiya, Hisato; Horie, Hideki; Miyagi, Kazumi

2009-01-01

The purpose of this work is to evaluate quantitatively and statistically the safety performance of Super-Safe, Small, and Simple reactor (4S) by analyzing with ARGO code, a plant dynamics code for a sodium-cooled fast reactor. In this evaluation, an Anticipated Transient Without Scram (ATWS) is assumed, and an Unprotected Loss of Flow (ULOF) event is selected as a typical ATWS case. After a metric concerned with safety design is defined as performance factor a Phenomena Identification Ranking Table (PIRT) is produced in order to select the plausible phenomena that affect the metric. Then a sensitivity analysis is performed for the parameters related to the selected plausible phenomena. Finally the metric is evaluated with statistical methods whether it satisfies the given safety acceptance criteria. The result is as follows: The Cumulative Damage Fraction (CDF) for the cladding is defined as a metric, and the statistical estimation of the one-sided upper tolerance limit of 95 percent probability at a 95 percent confidence level in CDF is within the safety acceptance criterion; CDF < 0.1. The result shows that the 4S safety performance is acceptable in the ULOF event. (author)

Two classes of metric spaces

Directory of Open Access Journals (Sweden)

Isabel Garrido

2016-04-01

Full Text Available The class of metric spaces (X,d known as small-determined spaces, introduced by Garrido and Jaramillo, are properly defined by means of some type of real-valued Lipschitz functions on X. On the other hand, B-simple metric spaces introduced by Hejcman are defined in terms of some kind of bornologies of bounded subsets of X. In this note we present a common framework where both classes of metric spaces can be studied which allows us to see not only the relationships between them but also to obtain new internal characterizations of these metric properties.

Non-metric multidimensional performance indicator scaling reveals seasonal and team dissimilarity within the National Rugby League.

Science.gov (United States)

Woods, Carl T; Robertson, Sam; Sinclair, Wade H; Collier, Neil French

2018-04-01

Analysing the dissimilarity of seasonal and team profiles within elite sport may reveal the evolutionary dynamics of game-play, while highlighting the similarity of individual team profiles. This study analysed seasonal and team dissimilarity within the National Rugby League (NRL) between the 2005 to 2016 seasons. Longitudinal. Total seasonal values for 15 performance indicators were collected for every NRL team over the analysed period (n=190 observations). Non-metric multidimensional scaling was used to reveal seasonal and team dissimilarity. Compared to the 2005 to 2011 seasons, the 2012 to 2016 seasons were in a state of flux, with a relative dissimilarity in the positioning of team profiles on the ordination surface. There was an abrupt change in performance indicator characteristics following the 2012 season, with the 2014 season reflecting a large increase in the total count of 'all run metres' (d=1.21; 90% CI=0.56-1.83), 'kick return metres' (d=2.99; 90% CI=2.12-3.84) and decrease in 'missed tackles' (d=-2.43; 90% CI=-3.19 to -1.64) and 'tackle breaks' (d=-2.41; 90% CI=-3.17 to -1.62). Interpretation of team ordination plots showed that certain teams evolved in (dis)similar ways over the analysed period. It appears that NRL match-types evolved following the 2012 season and are in a current state of flux. The modification of coaching tactics and rule changes may have contributed to these observations. Coaches could use these results when designing prospective game strategies in the NRL. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

Safety- and performance indicators for a generic deep geological repository in clay

International Nuclear Information System (INIS)

Resele, G.; Niemeyer, M.; Wilhelm, St.; Heimer, St.; Mohlfeld, M.; Eilers, G.; Preuss, J.; Wollrath, J.

2010-01-01

Document available in extended abstract form only. As a first step of an impartial survey for an optimal site selection for a deep geological repository in Germany, potentially suitable regions shall be identified and localised according to their suitability. During the early phases of such a site selection procedure the information about the properties of the host rock and the geological situation at the potential sites is not very precise. As site investigation procedures are both expensive and time-consuming, it is essential to identify those properties of the geological barrier system that are most relevant for long-term safety. Furthermore, adequate indicators have to be chosen that allow a simple but efficient assessment of the suitability of the potential regions. Definition and application of 'exclusion criteria' based on single parameter values, e.g. the hydraulic conductivity of the host rock, is inadequate because the long-term safety depends on the interaction of many features and properties of the barrier system. In a research project, indicators have been developed which depend on the most relevant properties of the geological barriers and estimate the overall performance of a repository system. The application of these indicators on the barrier properties which have been found during the investigations of potential repository sites in clay located in Germany, Switzerland and France demonstrates how, for instance, an unfavourably high hydraulic permeability of the clay can be compensated by a large vertical extension of the clay layer and small hydraulic gradients. Other indicators evaluate the importance of hydraulic discontinuities and define the minimal requirements on technical barriers like seals and backfill of emplacement tunnels. When the information of the radionuclide inventory and the biosphere, especially the diluting aquifer is included, the indicators allow the estimation of the resulting dose which matches the result of a

Using Machine Learning for Risky Module Estimation of Safety-Critical Software

International Nuclear Information System (INIS)

Kim, Young Mi; Jeong, Choong Heui

2009-01-01

With the rapid development of digital computer and information processing technologies, nuclear I and C (Instrument and Control) system which needs safety critical function has adopted digital technologies. Software used in safety-critical system must have high dependability. Highly dependable software needs strict software testing and V and V activities. These days, regulatory demands for nuclear power plants are more and more increasing. But, human resources and time for regulation are limited. So, early software risky module prediction is very useful for software testing and regulation activities. Early estimation can be built from a collection of internal metrics during early development phase. Internal metrics are measures of a product derived from assessment of the product itself, and external metrics are measures of a product derived from assessment of the behavior of the systems. Internal metrics can be collected more easily and early than external metrics. In addition, internal metrics can be useful for estimating fault-prone software modules using machine learning. In this paper, we introduce current research status and techniques related to estimating risky software module using machine learning techniques. Section 2 describes the overview of the estimation model using machine learning and section 3 describes processes of the estimation model. Section 4 describes several estimation models using machine leanings. Section 5 concludes the paper

A Metric for Heterotic Moduli

Science.gov (United States)

Candelas, Philip; de la Ossa, Xenia; McOrist, Jock

2017-12-01

Heterotic vacua of string theory are realised, at large radius, by a compact threefold with vanishing first Chern class together with a choice of stable holomorphic vector bundle. These form a wide class of potentially realistic four-dimensional vacua of string theory. Despite all their phenomenological promise, there is little understanding of the metric on the moduli space of these. What is sought is the analogue of special geometry for these vacua. The metric on the moduli space is important in phenomenology as it normalises D-terms and Yukawa couplings. It is also of interest in mathematics, since it generalises the metric, first found by Kobayashi, on the space of gauge field connections, to a more general context. Here we construct this metric, correct to first order in {α^{\\backprime}}, in two ways: first by postulating a metric that is invariant under background gauge transformations of the gauge field, and also by dimensionally reducing heterotic supergravity. These methods agree and the resulting metric is Kähler, as is required by supersymmetry. Checking the metric is Kähler is intricate and the anomaly cancellation equation for the H field plays an essential role. The Kähler potential nevertheless takes a remarkably simple form: it is the Kähler potential of special geometry with the Kähler form replaced by the {α^{\\backprime}}-corrected hermitian form.

Analysis of Network Clustering Algorithms and Cluster Quality Metrics at Scale.

Science.gov (United States)

Emmons, Scott; Kobourov, Stephen; Gallant, Mike; Börner, Katy

2016-01-01

Notions of community quality underlie the clustering of networks. While studies surrounding network clustering are increasingly common, a precise understanding of the realtionship between different cluster quality metrics is unknown. In this paper, we examine the relationship between stand-alone cluster quality metrics and information recovery metrics through a rigorous analysis of four widely-used network clustering algorithms-Louvain, Infomap, label propagation, and smart local moving. We consider the stand-alone quality metrics of modularity, conductance, and coverage, and we consider the information recovery metrics of adjusted Rand score, normalized mutual information, and a variant of normalized mutual information used in previous work. Our study includes both synthetic graphs and empirical data sets of sizes varying from 1,000 to 1,000,000 nodes. We find significant differences among the results of the different cluster quality metrics. For example, clustering algorithms can return a value of 0.4 out of 1 on modularity but score 0 out of 1 on information recovery. We find conductance, though imperfect, to be the stand-alone quality metric that best indicates performance on the information recovery metrics. Additionally, our study shows that the variant of normalized mutual information used in previous work cannot be assumed to differ only slightly from traditional normalized mutual information. Smart local moving is the overall best performing algorithm in our study, but discrepancies between cluster evaluation metrics prevent us from declaring it an absolutely superior algorithm. Interestingly, Louvain performed better than Infomap in nearly all the tests in our study, contradicting the results of previous work in which Infomap was superior to Louvain. We find that although label propagation performs poorly when clusters are less clearly defined, it scales efficiently and accurately to large graphs with well-defined clusters.

Urban Landscape Metrics for Climate and Sustainability Assessments

Science.gov (United States)

Cochran, F. V.; Brunsell, N. A.

2014-12-01

To test metrics for rapid identification of urban classes and sustainable urban forms, we examine the configuration of urban landscapes using satellite remote sensing data. We adopt principles from landscape ecology and urban planning to evaluate urban heterogeneity and design themes that may constitute more sustainable urban forms, including compactness (connectivity), density, mixed land uses, diversity, and greening. Using 2-D wavelet and multi-resolution analysis, landscape metrics, and satellite-derived indices of vegetation fraction and impervious surface, the spatial variability of Landsat and MODIS data from metropolitan areas of Manaus and São Paulo, Brazil are investigated. Landscape metrics for density, connectivity, and diversity, like the Shannon Diversity Index, are used to assess the diversity of urban buildings, geographic extent, and connectedness. Rapid detection of urban classes for low density, medium density, high density, and tall building district at the 1-km scale are needed for use in climate models. If the complexity of finer-scale urban characteristics can be related to the neighborhood scale both climate and sustainability assessments may be more attainable across urban areas.

On characterizations of quasi-metric completeness

Energy Technology Data Exchange (ETDEWEB)

Dag, H.; Romaguera, S.; Tirado, P.

2017-07-01

Hu proved in [4] that a metric space (X, d) is complete if and only if for any closed subspace C of (X, d), every Banach contraction on C has fixed point. Since then several authors have investigated the problem of characterizing the metric completeness by means of fixed point theorems. Recently this problem has been studied in the more general context of quasi-metric spaces for different notions of completeness. Here we present a characterization of a kind of completeness for quasi-metric spaces by means of a quasi-metric versions of Hu’s theorem. (Author)

Designing Industrial Networks Using Ecological Food Web Metrics.

Science.gov (United States)

Layton, Astrid; Bras, Bert; Weissburg, Marc

2016-10-18

Biologically Inspired Design (biomimicry) and Industrial Ecology both look to natural systems to enhance the sustainability and performance of engineered products, systems and industries. Bioinspired design (BID) traditionally has focused on a unit operation and single product level. In contrast, this paper describes how principles of network organization derived from analysis of ecosystem properties can be applied to industrial system networks. Specifically, this paper examines the applicability of particular food web matrix properties as design rules for economically and biologically sustainable industrial networks, using an optimization model developed for a carpet recycling network. Carpet recycling network designs based on traditional cost and emissions based optimization are compared to designs obtained using optimizations based solely on ecological food web metrics. The analysis suggests that networks optimized using food web metrics also were superior from a traditional cost and emissions perspective; correlations between optimization using ecological metrics and traditional optimization ranged generally from 0.70 to 0.96, with flow-based metrics being superior to structural parameters. Four structural food parameters provided correlations nearly the same as that obtained using all structural parameters, but individual structural parameters provided much less satisfactory correlations. The analysis indicates that bioinspired design principles from ecosystems can lead to both environmentally and economically sustainable industrial resource networks, and represent guidelines for designing sustainable industry networks.

Social Media Metrics and Bibliometric Profiles of Neurosurgical Departments and Journals: Is There a Relationship?

Science.gov (United States)

Alotaibi, Naif M; Guha, Daipayan; Fallah, Aria; Aldakkan, Abdulrahman; Nassiri, Farshad; Badhiwala, Jetan H; Ibrahim, George M; Shamji, Mohammed F; Macdonald, R Loch; Lozano, Andres M

2016-06-01

Social media plays an increasingly important role in dissemination of knowledge and raising awareness of selected topics among the general public and the academic community. To investigate the relationship between social media metrics and academic indices of neurosurgical programs and journals. A 2-step online search was performed to identify official social media accounts of neurosurgical departments that were accredited by the Accreditation Council for Graduate Medical Education and the Royal College of Physicians and Surgeons of Canada. Dedicated neurosurgery and spine journals' social media accounts also were identified through an online search on SCImago Journal and Country Rank portal. Nonparametric tests were performed with bootstrapping to compare groups and to look for correlations between social media and academic metrics. We identified 36 social media accounts officially affiliated with academic neurosurgical institutions. These accounts represented 22 of 119 neurosurgical programs in North America (18.4%). The presence of a social media account for neurosurgical departments was associated with statistically significant higher values of academic impact metrics (P social media metrics for neurosurgical department accounts, however, did not correlate with any values of academic indices. For journals, there were 11 journals present on social media and had greater academic metrics compared with journals without social media presence (P Social media presence is associated with stronger academic bibliometrics profiles for both neurosurgical departments and journals. The impact of social media metrics on indices of scientific impact in neurosurgery is not known. Copyright © 2016 Elsevier Inc. All rights reserved.

Crowdsourcing metrics of digital collections

Directory of Open Access Journals (Sweden)

Tuula Pääkkönen

2015-12-01

Full Text Available In the National Library of Finland (NLF there are millions of digitized newspaper and journal pages, which are openly available via the public website  http://digi.kansalliskirjasto.fi. To serve users better, last year the front end was completely overhauled with its main aim in crowdsourcing features, e.g., by giving end-users the opportunity to create digital clippings and a personal scrapbook from the digital collections. But how can you know whether crowdsourcing has had an impact? How much crowdsourcing functionalities have been used so far? Did crowdsourcing work? In this paper the statistics and metrics of a recent crowdsourcing effort are analysed across the different digitized material types (newspapers, journals, ephemera. The subjects, categories and keywords given by the users are analysed to see which topics are the most appealing. Some notable public uses of the crowdsourced article clippings are highlighted. These metrics give us indications on how the end-users, based on their own interests, are investigating and using the digital collections. Therefore, the suggested metrics illustrate the versatility of the information needs of the users, varying from citizen science to research purposes. By analysing the user patterns, we can respond to the new needs of the users by making minor changes to accommodate the most active participants, while still making the service more approachable for those who are trying out the functionalities for the first time. Participation in the clippings and annotations can enrich the materials in unexpected ways and can possibly pave the way for opportunities of using crowdsourcing more also in research contexts. This creates more opportunities for the goals of open science since source data becomes ­available, making it possible for researchers to reach out to the general public for help. In the long term, utilizing, for example, text mining methods can allow these different end-user segments to

Engineering performance metrics

Science.gov (United States)

Delozier, R.; Snyder, N.

1993-03-01

Implementation of a Total Quality Management (TQM) approach to engineering work required the development of a system of metrics which would serve as a meaningful management tool for evaluating effectiveness in accomplishing project objectives and in achieving improved customer satisfaction. A team effort was chartered with the goal of developing a system of engineering performance metrics which would measure customer satisfaction, quality, cost effectiveness, and timeliness. The approach to developing this system involved normal systems design phases including, conceptual design, detailed design, implementation, and integration. The lessons teamed from this effort will be explored in this paper. These lessons learned may provide a starting point for other large engineering organizations seeking to institute a performance measurement system accomplishing project objectives and in achieving improved customer satisfaction. To facilitate this effort, a team was chartered to assist in the development of the metrics system. This team, consisting of customers and Engineering staff members, was utilized to ensure that the needs and views of the customers were considered in the development of performance measurements. The development of a system of metrics is no different than the development of any type of system. It includes the steps of defining performance measurement requirements, measurement process conceptual design, performance measurement and reporting system detailed design, and system implementation and integration.

MO-G-BRE-06: Metrics of Success: Measuring Participation and Attitudes Related to Near-Miss Incident Learning Systems

Energy Technology Data Exchange (ETDEWEB)

Nyflot, MJ; Kusano, AS; Zeng, J; Carlson, JC; Novak, A; Sponseller, P; Jordan, L; Kane, G; Ford, EC [University of Washington, Seattle, WA (United States)

2014-06-15

Purpose: Interest in incident learning systems (ILS) for improving safety and quality in radiation oncology is growing, as evidenced by the upcoming release of the national ILS. However, an institution implementing such a system would benefit from quantitative metrics to evaluate performance and impact. We developed metrics to measure volume of reporting, severity of reported incidents, and changes in staff attitudes over time from implementation of our institutional ILS. Methods: We analyzed 2023 incidents from our departmental ILS from 2/2012–2/2014. Incidents were prospectively assigned a near-miss severity index (NMSI) at multidisciplinary review to evaluate the potential for error ranging from 0 to 4 (no harm to critical). Total incidents reported, unique users reporting, and average NMSI were evaluated over time. Additionally, departmental safety attitudes were assessed through a 26 point survey adapted from the AHRQ Hospital Survey on Patient Safety Culture before, 12 months, and 24 months after implementation of the incident learning system. Results: Participation in the ILS increased as demonstrated by total reports (approximately 2.12 additional reports/month) and unique users reporting (0.51 additional users reporting/month). Also, the average NMSI of reports trended lower over time, significantly decreasing after 12 months of reporting (p<0.001) but with no significant change at months 18 or 24. In survey data significant improvements were noted in many dimensions, including perceived barriers to reporting incidents such as concern of embarrassment (37% to 18%; p=0.02) as well as knowledge of what incidents to report, how to report them, and confidence that these reports were used to improve safety processes. Conclusion: Over a two-year period, our departmental ILS was used more frequently, incidents became less severe, and staff confidence in the system improved. The metrics used here may be useful for other institutions seeking to create or evaluate

MO-G-BRE-06: Metrics of Success: Measuring Participation and Attitudes Related to Near-Miss Incident Learning Systems

International Nuclear Information System (INIS)

Nyflot, MJ; Kusano, AS; Zeng, J; Carlson, JC; Novak, A; Sponseller, P; Jordan, L; Kane, G; Ford, EC

2014-01-01

Purpose: Interest in incident learning systems (ILS) for improving safety and quality in radiation oncology is growing, as evidenced by the upcoming release of the national ILS. However, an institution implementing such a system would benefit from quantitative metrics to evaluate performance and impact. We developed metrics to measure volume of reporting, severity of reported incidents, and changes in staff attitudes over time from implementation of our institutional ILS. Methods: We analyzed 2023 incidents from our departmental ILS from 2/2012–2/2014. Incidents were prospectively assigned a near-miss severity index (NMSI) at multidisciplinary review to evaluate the potential for error ranging from 0 to 4 (no harm to critical). Total incidents reported, unique users reporting, and average NMSI were evaluated over time. Additionally, departmental safety attitudes were assessed through a 26 point survey adapted from the AHRQ Hospital Survey on Patient Safety Culture before, 12 months, and 24 months after implementation of the incident learning system. Results: Participation in the ILS increased as demonstrated by total reports (approximately 2.12 additional reports/month) and unique users reporting (0.51 additional users reporting/month). Also, the average NMSI of reports trended lower over time, significantly decreasing after 12 months of reporting (p<0.001) but with no significant change at months 18 or 24. In survey data significant improvements were noted in many dimensions, including perceived barriers to reporting incidents such as concern of embarrassment (37% to 18%; p=0.02) as well as knowledge of what incidents to report, how to report them, and confidence that these reports were used to improve safety processes. Conclusion: Over a two-year period, our departmental ILS was used more frequently, incidents became less severe, and staff confidence in the system improved. The metrics used here may be useful for other institutions seeking to create or evaluate

Brand metrics that matter

NARCIS (Netherlands)

Muntinga, D.; Bernritter, S.

2017-01-01

Het merk staat steeds meer centraal in de organisatie. Het is daarom essentieel om de gezondheid, prestaties en ontwikkelingen van het merk te meten. Het is echter een uitdaging om de juiste brand metrics te selecteren. Een enorme hoeveelheid metrics vraagt de aandacht van merkbeheerders. Maar welke

Privacy Metrics and Boundaries

NARCIS (Netherlands)

L-F. Pau (Louis-François)

2005-01-01

textabstractThis paper aims at defining a set of privacy metrics (quantitative and qualitative) in the case of the relation between a privacy protector ,and an information gatherer .The aims with such metrics are: -to allow to assess and compare different user scenarios and their differences; for

Performance indicators and combining assessments to evaluate the safety performance of licensees

International Nuclear Information System (INIS)

Aubrey, Richard; Van Binnebeek, J.J.; Warren, T.F.H.

1998-01-01

The CNRA believes that safety inspections are a major element in the regulatory authority's efforts to ensure the safe operation of nuclear facilities. Considering the importance of these issues, the Committee has established a special Working Group on Inspection Practices (WGIP). The purpose of WGIP, is to facilitate the exchange of information and experience related to regulatory safety inspections between CNRA Member countries. As a follow-up to the 1995 document on Compilation of Responses to a Questionnaire on the Evaluation of the Safety Performance of Licensees, WGIP members identified several issues where additional information would be useful in future meetings and discussions. The consensus of the Group was that performance indicators (PIs) and how assessments are combined were the two issues that should be addressed first. It was noted also that in addition to information in obtained through the questionnaire, results from the workshop in May 1996 may provide valuable input to the endeavour. This report summarises a review conducted of the PI-related information provided by the questionnaire, the workshop, and responses from WGIP members to a request for specific information not addressed previously

Nuclear safety: operational aspects. 1. Demonstrating the Link Between Safety Culture and Competitiveness

International Nuclear Information System (INIS)

Chakoff, H. Elliot; Slider, James E.

2001-01-01

by the inspectors and provided a wholly objective basis for evaluating performance. The follow-up study examined the long-term survivability of the 12 plants to determine the efficacy of the methodology in the presence of confounding factors, such as changes in the regulatory and economic environment. The current status of each plant was identified and compared to the status of that plant during the pilot study. For plants that shut down, we evaluated the factors that led to closure according to the methodology employed in the pilot study. Nonparametric statistical methods were employed to determine the difference in risk of early closure. Four of the 12 pilot plants closed during the 20-yr interval. The closures reflect a variety of factors, but those within the control of management predominate. Thus, Table I shows that plants identified as poorer performers experienced a 20-yr risk of early closure approximately ten times higher than plants identified as better performers. Given there was only a 5% chance that a plant identified as a better performer was actually a poorer performer, time has validated the metrics and methodology. During the past 20 yr, the industry has changed remarkably. The poor-performance risk factor has thinned the ranks of plants and operators such that the bulk of surviving plants are good performers. The poor-performance risk factor once dominated by regulatory considerations is now dominated by the influences of a Darwinian marketplace. Lessons learned in the development and followup of this methodology indicate that well-designed performance evaluation tools can provide insight into the business risk presented by a plant and establish a quantitative basis for control of safety culture and performance. (authors)

Advanced reactors: the case for metric design

International Nuclear Information System (INIS)

Ruby, L.

1986-01-01

The author argues that DOE should insist that all design specifications for advanced reactors be in the International System of Units (SI) in accordance with the Metric Conversion Act of 1975. Despite a lack of leadership from the federal government, industry has had to move toward conversion in order to compete on world markets. The US is the only major country without a scheduled conversion program. SI avoids the disadvantages of ambiguous names, non-coherent units, multiple units for the same quantity, multiple definitions, as well as barriers to international exchange and marketing and problems in comparing safety and code parameters. With a first step by DOE, the Nuclear Regulatory Commission should add the same requirements to reactor licensing guidelines. 4 references

Experiences with Software Quality Metrics in the EMI middleware

International Nuclear Information System (INIS)

Alandes, M; Meneses, D; Pucciani, G; Kenny, E M

2012-01-01

The EMI Quality Model has been created to define, and later review, the EMI (European Middleware Initiative) software product and process quality. A quality model is based on a set of software quality metrics and helps to set clear and measurable quality goals for software products and processes. The EMI Quality Model follows the ISO/IEC 9126 Software Engineering – Product Quality to identify a set of characteristics that need to be present in the EMI software. For each software characteristic, such as portability, maintainability, compliance, etc, a set of associated metrics and KPIs (Key Performance Indicators) are identified. This article presents how the EMI Quality Model and the EMI Metrics have been defined in the context of the software quality assurance activities carried out in EMI. It also describes the measurement plan and presents some of the metrics reports that have been produced for the EMI releases and updates. It also covers which tools and techniques can be used by any software project to extract “code metrics” on the status of the software products and “process metrics” related to the quality of the development and support process such as reaction time to critical bugs, requirements tracking and delays in product releases.

The Markov Latent Effects Approach to Safety and Decision -Making; TOPICAL

International Nuclear Information System (INIS)

COOPER, J. ARLIN

2001-01-01

The methodology in this report addresses the safety effects of organizational and operational factors that can be measured through ''inspection.'' The investigation grew out of a preponderance of evidence that the safety ''culture'' (attitude of employees and management toward safety) was frequently one of the major root causes behind accidents or safety-relevant failures. The approach is called ''Markov latent effects'' analysis. Since safety also depends on a multitude of factors that are best measured through well known risk analysis methods (e.g., fault trees, event trees, FMECA, physical response modeling, etc.), the Markov latent effects approach supplements conventional safety assessment and decision analysis methods. A top-down mathematical approach is developed for decomposing systems, for determining the most appropriate items to be measured, and for expressing the measurements as imprecise subjective metrics through possibilistic or fuzzy numbers. A mathematical model is developed that facilitates combining (aggregating) inputs into overall metrics and decision aids, also portraying the inherent uncertainty. A major goal of the modeling is to help convey the top-down system perspective. Metrics are weighted according to significance of the attribute with respect to subsystems and are aggregated nonlinearly. Since the accumulating effect responds less and less to additional contribution, it is termed ''soft'' mathematical aggregation, which is analogous to how humans frequently make decisions. Dependence among the contributing factors is accounted for by incorporating subjective metrics on commonality and by reducing the overall contribution of these combinations to the overall aggregation. Decisions derived from the results are facilitated in several ways. First, information is provided on input ''Importance'' and ''Sensitivity'' (both Primary and Secondary) in order to know where to place emphasis on investigation of root causes and in considering new

Using research metrics to evaluate the International Atomic Energy Agency guidelines on quality assurance for R&D

Energy Technology Data Exchange (ETDEWEB)

Bodnarczuk, M.

1994-06-01

The objective of the International Atomic Energy Agency (IAEA) Guidelines on Quality Assurance for R&D is to provide guidance for developing quality assurance (QA) programs for R&D work on items, services, and processes important to safety, and to support the siting, design, construction, commissioning, operation, and decommissioning of nuclear facilities. The standard approach to writing papers describing new quality guidelines documents is to present a descriptive overview of the contents of the document. I will depart from this approach. Instead, I will first discuss a conceptual framework of metrics for evaluating and improving basic and applied experimental science as well as the associated role that quality management should play in understanding and implementing these metrics. I will conclude by evaluating how well the IAEA document addresses the metrics from this conceptual framework and the broader principles of quality management.

Cyber threat metrics.

Energy Technology Data Exchange (ETDEWEB)

Frye, Jason Neal; Veitch, Cynthia K.; Mateski, Mark Elliot; Michalski, John T.; Harris, James Mark; Trevino, Cassandra M.; Maruoka, Scott

2012-03-01

Threats are generally much easier to list than to describe, and much easier to describe than to measure. As a result, many organizations list threats. Fewer describe them in useful terms, and still fewer measure them in meaningful ways. This is particularly true in the dynamic and nebulous domain of cyber threats - a domain that tends to resist easy measurement and, in some cases, appears to defy any measurement. We believe the problem is tractable. In this report we describe threat metrics and models for characterizing threats consistently and unambiguously. The purpose of this report is to support the Operational Threat Assessment (OTA) phase of risk and vulnerability assessment. To this end, we focus on the task of characterizing cyber threats using consistent threat metrics and models. In particular, we address threat metrics and models for describing malicious cyber threats to US FCEB agencies and systems.

Fixed point theory in metric type spaces

CERN Document Server

Agarwal, Ravi P; O’Regan, Donal; Roldán-López-de-Hierro, Antonio Francisco

2015-01-01

Written by a team of leading experts in the field, this volume presents a self-contained account of the theory, techniques and results in metric type spaces (in particular in G-metric spaces); that is, the text approaches this important area of fixed point analysis beginning from the basic ideas of metric space topology. The text is structured so that it leads the reader from preliminaries and historical notes on metric spaces (in particular G-metric spaces) and on mappings, to Banach type contraction theorems in metric type spaces, fixed point theory in partially ordered G-metric spaces, fixed point theory for expansive mappings in metric type spaces, generalizations, present results and techniques in a very general abstract setting and framework. Fixed point theory is one of the major research areas in nonlinear analysis. This is partly due to the fact that in many real world problems fixed point theory is the basic mathematical tool used to establish the existence of solutions to problems which arise natur...

Comparison of continuous versus categorical tumor measurement-based metrics to predict overall survival in cancer treatment trials

Science.gov (United States)

An, Ming-Wen; Mandrekar, Sumithra J.; Branda, Megan E.; Hillman, Shauna L.; Adjei, Alex A.; Pitot, Henry; Goldberg, Richard M.; Sargent, Daniel J.

2011-01-01

Purpose The categorical definition of response assessed via the Response Evaluation Criteria in Solid Tumors has documented limitations. We sought to identify alternative metrics for tumor response that improve prediction of overall survival. Experimental Design Individual patient data from three North Central Cancer Treatment Group trials (N0026, n=117; N9741, n=1109; N9841, n=332) were used. Continuous metrics of tumor size based on longitudinal tumor measurements were considered in addition to a trichotomized response (TriTR: Response vs. Stable vs. Progression). Cox proportional hazards models, adjusted for treatment arm and baseline tumor burden, were used to assess the impact of the metrics on subsequent overall survival, using a landmark analysis approach at 12-, 16- and 24-weeks post baseline. Model discrimination was evaluated using the concordance (c) index. Results The overall best response rates for the three trials were 26%, 45%, and 25% respectively. While nearly all metrics were statistically significantly associated with overall survival at the different landmark time points, the c-indices for the traditional response metrics ranged from 0.59-0.65; for the continuous metrics from 0.60-0.66 and for the TriTR metrics from 0.64-0.69. The c-indices for TriTR at 12-weeks were comparable to those at 16- and 24-weeks. Conclusions Continuous tumor-measurement-based metrics provided no predictive improvement over traditional response based metrics or TriTR; TriTR had better predictive ability than best TriTR or confirmed response. If confirmed, TriTR represents a promising endpoint for future Phase II trials. PMID:21880789

Deep Transfer Metric Learning.

Science.gov (United States)

Junlin Hu; Jiwen Lu; Yap-Peng Tan; Jie Zhou

2016-12-01

Conventional metric learning methods usually assume that the training and test samples are captured in similar scenarios so that their distributions are assumed to be the same. This assumption does not hold in many real visual recognition applications, especially when samples are captured across different data sets. In this paper, we propose a new deep transfer metric learning (DTML) method to learn a set of hierarchical nonlinear transformations for cross-domain visual recognition by transferring discriminative knowledge from the labeled source domain to the unlabeled target domain. Specifically, our DTML learns a deep metric network by maximizing the inter-class variations and minimizing the intra-class variations, and minimizing the distribution divergence between the source domain and the target domain at the top layer of the network. To better exploit the discriminative information from the source domain, we further develop a deeply supervised transfer metric learning (DSTML) method by including an additional objective on DTML, where the output of both the hidden layers and the top layer are optimized jointly. To preserve the local manifold of input data points in the metric space, we present two new methods, DTML with autoencoder regularization and DSTML with autoencoder regularization. Experimental results on face verification, person re-identification, and handwritten digit recognition validate the effectiveness of the proposed methods.

Energy functionals for Calabi-Yau metrics

International Nuclear Information System (INIS)

Headrick, M; Nassar, A

2013-01-01

We identify a set of ''energy'' functionals on the space of metrics in a given Kähler class on a Calabi-Yau manifold, which are bounded below and minimized uniquely on the Ricci-flat metric in that class. Using these functionals, we recast the problem of numerically solving the Einstein equation as an optimization problem. We apply this strategy, using the ''algebraic'' metrics (metrics for which the Kähler potential is given in terms of a polynomial in the projective coordinates), to the Fermat quartic and to a one-parameter family of quintics that includes the Fermat and conifold quintics. We show that this method yields approximations to the Ricci-flat metric that are exponentially accurate in the degree of the polynomial (except at the conifold point, where the convergence is polynomial), and therefore orders of magnitude more accurate than the balanced metrics, previously studied as approximations to the Ricci-flat metric. The method is relatively fast and easy to implement. On the theoretical side, we also show that the functionals can be used to give a heuristic proof of Yau's theorem

Scholarly metrics under the microscope from citation analysis to academic auditing

CERN Document Server

Sugimoto, Cassidy R

2015-01-01

Interest in bibliometrics the quantitative analysis of publications, authors, bibliographic references, and related concepts has never been greater, as universities, research councils, national governments, and corporations seek to identify robust indicators of research effectiveness. In Scholarly Metrics Under the Microscope, editors Blaise Cronin and Cassidy R. Sugimoto bring together and expertly annotate a wealth of previously published papers, harvested from a wide range of journals and disciplines, that provide critical commentary on the use of metrics, both established and emerging, to assess the quality of scholarship and the impact of research. The expansive overview and analysis presented in this remarkable volume will be welcomed by any scholar or researcher who seeks a deeper understanding of the role and significance of performance metrics in higher education, research evaluation, and science policy.

MO-A-16A-01: QA Procedures and Metrics: In Search of QA Usability

International Nuclear Information System (INIS)

Sathiaseelan, V; Thomadsen, B

2014-01-01

Radiation therapy has undergone considerable changes in the past two decades with a surge of new technology and treatment delivery methods. The complexity of radiation therapy treatments has increased and there has been increased awareness and publicity about the associated risks. In response, there has been proliferation of guidelines for medical physicists to adopt to ensure that treatments are delivered safely. Task Group recommendations are copious, and clinical physicists' hours are longer, stretched to various degrees between site planning and management, IT support, physics QA, and treatment planning responsibilities.Radiation oncology has many quality control practices in place to ensure the delivery of high-quality, safe treatments. Incident reporting systems have been developed to collect statistics about near miss events at many radiation oncology centers. However, tools are lacking to assess the impact of these various control measures. A recent effort to address this shortcoming is the work of Ford et al (2012) who recently published a methodology enumerating quality control quantification for measuring the effectiveness of safety barriers. Over 4000 near-miss incidents reported from 2 academic radiation oncology clinics were analyzed using quality control quantification, and a profile of the most effective quality control measures (metrics) was identified.There is a critical need to identify a QA metric to help the busy clinical physicists to focus their limited time and resources most effectively in order to minimize or eliminate errors in the radiation treatment delivery processes. In this symposium the usefulness of workflows and QA metrics to assure safe and high quality patient care will be explored.Two presentations will be given:Quality Metrics and Risk Management with High Risk Radiation Oncology ProceduresStrategies and metrics for quality management in the TG-100 Era Learning Objectives: Provide an overview and the need for QA usability

MO-A-16A-01: QA Procedures and Metrics: In Search of QA Usability

Energy Technology Data Exchange (ETDEWEB)

Sathiaseelan, V [Northwestern Memorial Hospital, Chicago, IL (United States); Thomadsen, B [University of Wisconsin, Madison, WI (United States)

2014-06-15

Radiation therapy has undergone considerable changes in the past two decades with a surge of new technology and treatment delivery methods. The complexity of radiation therapy treatments has increased and there has been increased awareness and publicity about the associated risks. In response, there has been proliferation of guidelines for medical physicists to adopt to ensure that treatments are delivered safely. Task Group recommendations are copious, and clinical physicists' hours are longer, stretched to various degrees between site planning and management, IT support, physics QA, and treatment planning responsibilities.Radiation oncology has many quality control practices in place to ensure the delivery of high-quality, safe treatments. Incident reporting systems have been developed to collect statistics about near miss events at many radiation oncology centers. However, tools are lacking to assess the impact of these various control measures. A recent effort to address this shortcoming is the work of Ford et al (2012) who recently published a methodology enumerating quality control quantification for measuring the effectiveness of safety barriers. Over 4000 near-miss incidents reported from 2 academic radiation oncology clinics were analyzed using quality control quantification, and a profile of the most effective quality control measures (metrics) was identified.There is a critical need to identify a QA metric to help the busy clinical physicists to focus their limited time and resources most effectively in order to minimize or eliminate errors in the radiation treatment delivery processes. In this symposium the usefulness of workflows and QA metrics to assure safe and high quality patient care will be explored.Two presentations will be given:Quality Metrics and Risk Management with High Risk Radiation Oncology ProceduresStrategies and metrics for quality management in the TG-100 Era Learning Objectives: Provide an overview and the need for QA usability

Measuring the impact of pharmacoepidemiologic research using altmetrics: A case study of a CNODES drug-safety article.

Science.gov (United States)

Gamble, J M; Traynor, Robyn L; Gruzd, Anatoliy; Mai, Philip; Dormuth, Colin R; Sketris, Ingrid S

2018-03-24

To provide an overview of altmetrics, including their potential benefits and limitations, how they may be obtained, and their role in assessing pharmacoepidemiologic research impact. Our review was informed by compiling relevant literature identified through searching multiple health research databases (PubMed, Embase, and CIHNAHL) and grey literature sources (websites, blogs, and reports). We demonstrate how pharmacoepidemiologists, in particular, may use altmetrics to understand scholarly impact and knowledge translation by providing a case study of a drug-safety study conducted by the Canadian Network of Observational Drug Effect Studies. A common approach to measuring research impact is the use of citation-based metrics, such as an article's citation count or a journal's impact factor. "Alternative" metrics, or altmetrics, are increasingly supported as a complementary measure of research uptake in the age of social media. Altmetrics are nontraditional indicators that capture a diverse set of traceable, online research-related artifacts including peer-reviewed publications and other research outputs (software, datasets, blogs, videos, posters, policy documents, presentations, social media posts, wiki entries, etc). Compared with traditional citation-based metrics, altmetrics take a more holistic view of research impact, attempting to capture the activity and engagement of both scholarly and nonscholarly communities. Despite the limited theoretical underpinnings, possible commercial influence, potential for gaming and manipulation, and numerous data quality-related issues, altmetrics are promising as a supplement to more traditional citation-based metrics because they can ingest and process a larger set of data points related to the flow and reach of scholarly communication from an expanded pool of stakeholders. Unlike citation-based metrics, altmetrics are not inherently rooted in the research publication process, which includes peer review; it is unclear to

Regge calculus from discontinuous metrics

International Nuclear Information System (INIS)

Khatsymovsky, V.M.

2003-01-01

Regge calculus is considered as a particular case of the more general system where the linklengths of any two neighbouring 4-tetrahedra do not necessarily coincide on their common face. This system is treated as that one described by metric discontinuous on the faces. In the superspace of all discontinuous metrics the Regge calculus metrics form some hypersurface defined by continuity conditions. Quantum theory of the discontinuous metric system is assumed to be fixed somehow in the form of quantum measure on (the space of functionals on) the superspace. The problem of reducing this measure to the Regge hypersurface is addressed. The quantum Regge calculus measure is defined from a discontinuous metric measure by inserting the δ-function-like phase factor. The requirement that continuity conditions be imposed in a 'face-independent' way fixes this factor uniquely. The term 'face-independent' means that this factor depends only on the (hyper)plane spanned by the face, not on it's form and size. This requirement seems to be natural from the viewpoint of existence of the well-defined continuum limit maximally free of lattice artefacts

Numerical Calabi-Yau metrics

International Nuclear Information System (INIS)

Douglas, Michael R.; Karp, Robert L.; Lukic, Sergio; Reinbacher, Rene

2008-01-01

We develop numerical methods for approximating Ricci flat metrics on Calabi-Yau hypersurfaces in projective spaces. Our approach is based on finding balanced metrics and builds on recent theoretical work by Donaldson. We illustrate our methods in detail for a one parameter family of quintics. We also suggest several ways to extend our results

Readmissions for Selected Infections Due to Medical Care: Expanding the Definition of a Patient Safety Indicator

National Research Council Canada - National Science Library

Gallagher, Brian; Cen, Liyi; Hannan, Edward L

2005-01-01

Objective: Evaluate the Agency for Healthcare Research and Quality's Patient Safety Indicator that identifies patients with selected infections that result from medical care during hospital inpatient treatment...

Societal impact metrics for non-patentable research in dentistry

Energy Technology Data Exchange (ETDEWEB)

Hicks, D.; Isett, K.; Melkers, J.; Song, L.; Trivedi, R.

2016-07-01

Indicators of research impact tend to revolve around patents, licenses and startups. However, much university research is non-patentable and therefore doesn’t register in those metrics. That does not mean such research lacks impact, just that it follows different pathways to use in society. Without the visibility of patents, license income and jobs created in startups, society risks ignoring or discounting the societal impact of such research and therefore of undervaluing the research itself. In order to make visible the importance of research advances underpinning broader societal advance, in this project we explore the possibility of developing metrics of research impact for research whose results are relevant to professional practice. (Author)

BMR: Benchmarking Metrics Recommender for Personnel issues in Software Development Projects

Directory of Open Access Journals (Sweden)

Angel Garcia-Crespo

2009-12-01

Full Text Available This paper presents an architecture which applies document similarity measures to the documentation produced during the phases of software development in order to generate recommendations of process and people metrics for similar projects. The application makes a judgment of similarity of the Service Provision Offer (SPO document of a new proposed project to a collection of Project History Documents (PHD, stored in a repository of unstructured texts. The process is carried out in three stages: firstly, clustering of the Offer document with the set of PHDs which are most similar to it; this provides the initial indication of whether similar previous projects exist, and signifies similarity. Secondly, determination of which PHD in the set is most comparable with the Offer document, based on various parameters: project effort, project duration (time, project resources (members/size of team, costs, and sector(s involved, indicating comparability of projects. The comparable parameters are extracted using the GATE Natural Language Processing architecture. Lastly, a recommendation of metrics for the new project is made, which is based on the transferability of the metrics of the most similar and comparable PHD extracted, here referred to as recommendation.

Metrics for Evaluation of Student Models

Science.gov (United States)

Pelanek, Radek

2015-01-01

Researchers use many different metrics for evaluation of performance of student models. The aim of this paper is to provide an overview of commonly used metrics, to discuss properties, advantages, and disadvantages of different metrics, to summarize current practice in educational data mining, and to provide guidance for evaluation of student…

Indicators of School Crime Safety, 2000.

Science.gov (United States)

Kaufman, Phillip; Chen, Xianglei; Choy, Susan P.; Ruddy, Sally A.; Miller, Amanda K.; Fleury, Jill K.; Chandler, Kathryn A.; Rand, Michael R.; Klaus, Patsy; Planty, Michael

Providing the latest data, this report on school safety presents a mixed picture: while overall crime has declined, violence, gangs, and drugs remain at some schools. Victimization at school declined from 1995-99, though rates for fighting and weapon threats remain steady. Students seem more secure, and gang activity decreased; however, in grades…

Road safety performance indicators : country profiles. SafetyNet, Building the European Road Safety Observatory, Workpackage 3, Deliverable 3.7b.

NARCIS (Netherlands)

Riguelle, F. Eksler, V. Holló, P. Morsink, P. Gent, A. van Gitelman, V. Assum, T. & Rackliff, L.

2009-01-01

The EC 6th Framework Integrated Project SafetyNet aims to accelerate the availability and use of harmonised road safety data in Europe. Having such data available throughout Europe would be tremendously beneficial for road safety, since it would enable the evaluation of road safety measures, the

Canadian Association of Gastroenterology Consensus Guidelines on Safety and Quality Indicators in Endoscopy

Directory of Open Access Journals (Sweden)

David Armstrong

2012-01-01

Full Text Available Several organizations worldwide have developed procedure-based guidelines and/or position statements regarding various aspects of quality and safety indicators, and credentialing for endoscopy. Although important, they do not specifically address patient needs or provide a framework for their adoption in the context of endoscopy services. The consensus guidelines reported in this article, however, aimed to identify processes and indicators relevant to the provision of high-quality endoscopy services that will support ongoing quality improvement across many jurisdictions, specifically in the areas of ethics, facility standards and policies, quality assurance, training and education, reporting standards and patient perceptions.

Research study about the establishment of safety culture. Effects of organizational factors in construction industry's safety indices

International Nuclear Information System (INIS)

Kojima, Mitsuhiro; Hirose, Humiko; Takano, Kenichi; Hasegawa, Naoko

1999-01-01

To find the relationships between safety related activities (such as safety patrol' or '4s/5s activities') and accidents rate in the workplace, questionnaires were sent to 965 construction companies and 120 answers were returned. In this questionnaire, safety activities, safety regulations and safety policies of the companies were asked and organizational climates, company policies, philosophies and the number of accidents in workplace were also asked. There seems some relationships between accidents rate and safety activities, safety regulations and safety policies in the companies, but the deviations between estimate values and observed values are so great that it seems impossible to estimate the accidents rate in the working place from the safety activities, safety regulations and safety policies of the companies. On the other hand, some characteristics of safety activities and organizational climates in the construction industry were identified using multi variants analysis. More detailed researches using sophisticated questionnaire will be conducted in the construction industry and petrochemical industry and relationships between the accidents rate and the safety activities will be compared between different industries. (author)

Do projections from bioclimatic envelope models and climate change metrics match?

DEFF Research Database (Denmark)

Garcia, Raquel A.; Cabeza, Mar; Altwegg, Res

2016-01-01

as indicators of the exposure of species to climate change. Here, we investigate whether these two approaches provide qualitatively similar indications about where biodiversity is potentially most exposed to climate change. Location: Sub-Saharan Africa. Methods: We compared a range of climate change metrics...... for sub-Saharan Africa with ensembles of bioclimatic envelope models for 2723 species of amphibians, snakes, mammals and birds. For each taxonomic group, we performed three comparisons between the two approaches: (1) is projected change in local climatic suitability (models) greater in grid cells...... between the two approaches was found for all taxonomic groups, although it was stronger for species with a narrower climatic envelope breadth. Main conclusions: For sub-Saharan African vertebrates, projected patterns of exposure to climate change given by climate change metrics alone were qualitatively...

Towards a meaningful metric for the quantification of GHG emissions of electric vehicles (EVs)

International Nuclear Information System (INIS)

Manjunath, Archana; Gross, George

2017-01-01

A key motivator for wider deployment of electric vehicles (EVs) – vehicles that are fully powered by battery charged from grid electricity – is to bring about environmental cleanliness. This goal is based on the fact that EVs produce zero tailpipe emissioon the associated carbon emissins. However, the generation and transmission of the charge electricity produce emissions that are not explicitly accounted by current measurement metrics for EV greenhouse gas (GHG) emissions and as such, the notion of environmental cleanliness of EVs becomes questionable. In this paper, we propose a comprehensive metric to quantify the actual environmental impacts of EVs. The new metric that we call the electric vehicle emissions index (EVEI) captures CO_2 emissions in the electricity production to consumption stages. Our metric is the first that provides transparency in the comparison of total emissions among various EV models, as well as in the side-by-side comparison of an EV with a gasoline vehicle (GV). Illustrative results indicate that the actual environmental impacts of an EV may show wide spatial variations and in some case, these impacts may be even greater than that of GV. Such insights that the EVEI provides may be useful in a wide range of applications, particularly in policy and incentive formulation. - Highlights: • We propose the Electric Vehicle Emission Index (EVEI) metric. • EVEI indicates the EV environmental impacts w.r.t gasoline vehicles (GVs). • Fuel economy and resource mix are the major contributors to emissions. • Results indicate EVs may prove to be dirtier than GVs in certain areas of usage. • Insights may prove to be valuable to policy and incentive formulation.

Safety indicators used to prove the role of natural barrier for Saligny near surface disposal system

International Nuclear Information System (INIS)

Niculae, Ortenzia; Durdun, I.; Ionita, Gh.

2007-01-01

Full text: The siting process for a near surface repository suitable for the radioactive waste resulted from Cernavoda NPP operation and decommissioning (low level radioactive waste with small amounts of long lived radionuclides) started in 1992 and it included the collection of data from specific field and laboratory works for each site selection stage as well as different safety performance evaluation. According to the IAEA standards (Safety Guide No.111-G-3.1, 1994), the purpose of the siting process is not to get the best solution but to find out 'an acceptable solution, with sufficient safety reserves'. Since 1996, detailed field and investigation works were performed in Saligny preferred site including an experimental area to test the improvement method proposed for the foundation ground of repository, as well as detailed performance assessments using specific computer codes. The paper presents the results of recent performance assessments for the natural barrier of disposal system. The calculations were done using HYDRUS 2D, FEHM and AMBER computer codes. The endpoint of the Safety Report for Siting a Near Surface Repository at Saligny Site [CITON and SCN, Safety Report for Siting a Near Surface Repository at Saligny Site, 2007, pages 8.2.1-1 to 8.2.1-22 and 8-63 to 8-70] was the assessment of safety indicators. Individual annual effective dose for exposed peoples (both workers and general public) was the main safety indicator. In the same document, the radionuclide concentration in the disposal system compartments has been evaluated, as supplementary safety indicator of repository barriers (especially to confirm the natural barrier performance). The results confirmed the performance of natural barrier: the maximum extension of H-3 and Co-60 contaminant plume after repository closure remains more above underground water level. In the aquifer, iodine concentration reaches a value of 10 -15 mol/l, at the same magnitude order with the admitted limit from CFR

Issues in Benchmark Metric Selection

Science.gov (United States)

Crolotte, Alain

It is true that a metric can influence a benchmark but will esoteric metrics create more problems than they will solve? We answer this question affirmatively by examining the case of the TPC-D metric which used the much debated geometric mean for the single-stream test. We will show how a simple choice influenced the benchmark and its conduct and, to some extent, DBMS development. After examining other alternatives our conclusion is that the “real” measure for a decision-support benchmark is the arithmetic mean.

Multi-metric model-based structural health monitoring

Science.gov (United States)

Jo, Hongki; Spencer, B. F.

2014-04-01

ABSTRACT The inspection and maintenance of bridges of all types is critical to the public safety and often critical to the economy of a region. Recent advanced sensor technologies provide accurate and easy-to-deploy means for structural health monitoring and, if the critical locations are known a priori, can be monitored by direct measurements. However, for today's complex civil infrastructure, the critical locations are numerous and often difficult to identify. This paper presents an innovative framework for structural monitoring at arbitrary locations on the structure combining computational models and limited physical sensor information. The use of multi-metric measurements is advocated to improve the accuracy of the approach. A numerical example is provided to illustrate the proposed hybrid monitoring framework, particularly focusing on fatigue life assessment of steel structures.

Establishing Quantitative Software Metrics in Department of the Navy Programs

Science.gov (United States)

2016-04-01

may indicate the use of design patterns. COUPLING This metric shows how the source code depends on the strength with which classes, methods, and...Testing Fundamentals. “Defect Density.” [Online]. Available: http://softwaretestingfundamentals.com/defect-density. 10. "Atomiq Code Similarity Finder

Robustness of climate metrics under climate policy ambiguity

International Nuclear Information System (INIS)

Ekholm, Tommi; Lindroos, Tomi J.; Savolainen, Ilkka

2013-01-01

Highlights: • We assess the economic impacts of using different climate metrics. • The setting is cost-efficient scenarios for three interpretations of the 2C target. • With each target setting, the optimal metric is different. • Therefore policy ambiguity prevents the selection of an optimal metric. • Robust metric values that perform well with multiple policy targets however exist. -- Abstract: A wide array of alternatives has been proposed as the common metrics with which to compare the climate impacts of different emission types. Different physical and economic metrics and their parameterizations give diverse weights between e.g. CH 4 and CO 2 , and fixing the metric from one perspective makes it sub-optimal from another. As the aims of global climate policy involve some degree of ambiguity, it is not possible to determine a metric that would be optimal and consistent with all policy aims. This paper evaluates the cost implications of using predetermined metrics in cost-efficient mitigation scenarios. Three formulations of the 2 °C target, including both deterministic and stochastic approaches, shared a wide range of metric values for CH 4 with which the mitigation costs are only slightly above the cost-optimal levels. Therefore, although ambiguity in current policy might prevent us from selecting an optimal metric, it can be possible to select robust metric values that perform well with multiple policy targets

Web metrics for library and information professionals

CERN Document Server

Stuart, David

2014-01-01

This is a practical guide to using web metrics to measure impact and demonstrate value. The web provides an opportunity to collect a host of different metrics, from those associated with social media accounts and websites to more traditional research outputs. This book is a clear guide for library and information professionals as to what web metrics are available and how to assess and use them to make informed decisions and demonstrate value. As individuals and organizations increasingly use the web in addition to traditional publishing avenues and formats, this book provides the tools to unlock web metrics and evaluate the impact of this content. The key topics covered include: bibliometrics, webometrics and web metrics; data collection tools; evaluating impact on the web; evaluating social media impact; investigating relationships between actors; exploring traditional publications in a new environment; web metrics and the web of data; the future of web metrics and the library and information professional.Th...

Partial rectangular metric spaces and fixed point theorems.

Science.gov (United States)

Shukla, Satish

2014-01-01

The purpose of this paper is to introduce the concept of partial rectangular metric spaces as a generalization of rectangular metric and partial metric spaces. Some properties of partial rectangular metric spaces and some fixed point results for quasitype contraction in partial rectangular metric spaces are proved. Some examples are given to illustrate the observed results.

Oculomotor Behavior Metrics Change According to Circadian Phase and Time Awake

Science.gov (United States)

Flynn-Evans, Erin E.; Tyson, Terence L.; Cravalho, Patrick; Feick, Nathan; Stone, Leland S.

2017-01-01

There is a need for non-invasive, objective measures to forecast performance impairment arising from sleep loss and circadian misalignment, particularly in safety-sensitive occupations. Eye-tracking devices have been used in some operational scenarios, but such devices typically focus on eyelid closures and slow rolling eye movements and are susceptible to the intrusion of head movement artifacts. We hypothesized that an expanded suite of oculomotor behavior metrics, collected during a visual tracking task, would change according to circadian phase and time awake, and could be used as a marker of performance impairment.

A Kerr-NUT metric

International Nuclear Information System (INIS)

Vaidya, P.C.; Patel, L.K.; Bhatt, P.V.

1976-01-01

Using Galilean time and retarded distance as coordinates the usual Kerr metric is expressed in form similar to the Newman-Unti-Tamburino (NUT) metric. The combined Kerr-NUT metric is then investigated. In addition to the Kerr and NUT solutions of Einstein's equations, three other types of solutions are derived. These are (i) the radiating Kerr solution, (ii) the radiating NUT solution satisfying Rsub(ik) = sigmaxisub(i)xisub(k), xisub(i)xisup(i) = 0, and (iii) the associated Kerr solution satisfying Rsub(ik) = 0. Solution (i) is distinct from and simpler than the one reported earlier by Vaidya and Patel (Phys. Rev.; D7:3590 (1973)). Solutions (ii) and (iii) gave line elements which have the axis of symmetry as a singular line. (author)

Daylight metrics and energy savings

Energy Technology Data Exchange (ETDEWEB)

Mardaljevic, John; Heschong, Lisa; Lee, Eleanor

2009-12-31

The drive towards sustainable, low-energy buildings has increased the need for simple, yet accurate methods to evaluate whether a daylit building meets minimum standards for energy and human comfort performance. Current metrics do not account for the temporal and spatial aspects of daylight, nor of occupants comfort or interventions. This paper reviews the historical basis of current compliance methods for achieving daylit buildings, proposes a technical basis for development of better metrics, and provides two case study examples to stimulate dialogue on how metrics can be applied in a practical, real-world context.

Enhanced Accident Tolerant LWR Fuels National Metrics Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Lori Braase

2013-01-01

Commercialization. The activities performed during the feasibility assessment phase include laboratory scale experiments; fuel performance code updates; and analytical assessment of economic, operational, safety, fuel cycle, and environmental impacts of the new concepts. The development and qualification stage will consist of fuel fabrication and large scale irradiation and safety basis testing, leading to qualification and ultimate NRC licensing of the new fuel. The commercialization phase initiates technology transfer to industry for implementation. Attributes for fuels with enhanced accident tolerance include improved reaction kinetics with steam and slower hydrogen generation rate, while maintaining acceptable cladding thermo-mechanical properties; fuel thermo-mechanical properties; fuel-clad interactions; and fission-product behavior. These attributes provide a qualitative guidance for parameters that must be considered in the development of fuels and cladding with enhanced accident tolerance. However, quantitative metrics must be developed for these attributes. To initiate the quantitative metrics development, a Light Water Reactor Enhanced Accident Tolerant Fuels Metrics Development Workshop was held October 10-11, 2012, in Germantown, Maryland. This document summarizes the structure and outcome of the two-day workshop. Questions regarding the content can be directed to Lori Braase, 208-526-7763, lori.braase@inl.gov.

Metrics for energy resilience

International Nuclear Information System (INIS)

Roege, Paul E.; Collier, Zachary A.; Mancillas, James; McDonagh, John A.; Linkov, Igor

2014-01-01

Energy lies at the backbone of any advanced society and constitutes an essential prerequisite for economic growth, social order and national defense. However there is an Achilles heel to today's energy and technology relationship; namely a precarious intimacy between energy and the fiscal, social, and technical systems it supports. Recently, widespread and persistent disruptions in energy systems have highlighted the extent of this dependence and the vulnerability of increasingly optimized systems to changing conditions. Resilience is an emerging concept that offers to reconcile considerations of performance under dynamic environments and across multiple time frames by supplementing traditionally static system performance measures to consider behaviors under changing conditions and complex interactions among physical, information and human domains. This paper identifies metrics useful to implement guidance for energy-related planning, design, investment, and operation. Recommendations are presented using a matrix format to provide a structured and comprehensive framework of metrics relevant to a system's energy resilience. The study synthesizes previously proposed metrics and emergent resilience literature to provide a multi-dimensional model intended for use by leaders and practitioners as they transform our energy posture from one of stasis and reaction to one that is proactive and which fosters sustainable growth. - Highlights: • Resilience is the ability of a system to recover from adversity. • There is a need for methods to quantify and measure system resilience. • We developed a matrix-based approach to generate energy resilience metrics. • These metrics can be used in energy planning, system design, and operations

Balanced metrics for vector bundles and polarised manifolds

DEFF Research Database (Denmark)

Garcia Fernandez, Mario; Ross, Julius

2012-01-01

leads to a Hermitian-Einstein metric on E and a constant scalar curvature Kähler metric in c_1(L). For special values of α, limits of balanced metrics are solutions of a system of coupled equations relating a Hermitian-Einstein metric on E and a Kähler metric in c1(L). For this, we compute the top two......We consider a notion of balanced metrics for triples (X, L, E) which depend on a parameter α, where X is smooth complex manifold with an ample line bundle L and E is a holomorphic vector bundle over X. For generic choice of α, we prove that the limit of a convergent sequence of balanced metrics...

Natural Elemental Concentrations and Fluxes: Their Use as Indicators of Repository Safety

Energy Technology Data Exchange (ETDEWEB)

Miller, Bill; Lind, Andy; Savage, Dave; Maul, Philip; Robinson, Peter [EnvirosQuantisci, Melton Mowbray (United Kingdom)

2002-03-01

The calculated post-closure performance of a radioactive waste repository is generally quantified in terms of radiological dose or risk to humans, with safety being determined by whether the calculated exposure values are consistent with predetermined target criteria which are deemed to represent acceptable radiological hazards. Despite their general acceptance, however, dose and risk are not perfect measures of repository safety because, in order to calculate them, gross assumptions must be made for future human behaviour patterns. Such predictions clearly become increasingly uncertain as forecasts are made further into the future. As a consequence, there has been a growing interest in developing other ways of assessing repository safety which do not require assumptions to be made for future human behaviour. One proposed assessment method is to use the distributions of naturally-occurring chemical species in the environment, expressed either as concentrations or fluxes of elements, radionuclides or radioactivity, as natural safety indicators which may be compared with the PA predictions of repository releases. Numerous comparisons are possible between the repository and natural systems. The primary objective is to use the natural system to provide context to the hazard presented by the repository releases. Put simply, if it can be demonstrated that the flux to the biosphere from the repository is not significant compared with the natural flux from the geosphere, then its radiological significance should not be of great or priority concern. Natural safety indicators may be quantified on a site specific basis, using information derived from a repository site characterisation programme, and can be compared to the outputs from the associated site specific PAs. Such calculations and comparisons may be very detailed and might examine, for example, the spatial and temporal variations in the distributions and fluxes of naturally-occurring chemical species arising from

Combining energy and power based safety metrics in controller design for domestic robots

NARCIS (Netherlands)

Tadele, T.S.; de Vries, Theodorus J.A.; Stramigioli, Stefano

This paper presents a general passivity based interaction controller design approach that utilizes a combined energy and power based safety norms to assert safety of domestic robots. Since these robots are expected to co-habit the same environment with a human user, analysing and ensuring their

National evaluation of multidisciplinary quality metrics for head and neck cancer.

Science.gov (United States)

Cramer, John D; Speedy, Sedona E; Ferris, Robert L; Rademaker, Alfred W; Patel, Urjeet A; Samant, Sandeep

2017-11-15

The National Quality Forum has endorsed quality-improvement measures for multiple cancer types that are being developed into actionable tools to improve cancer care. No nationally endorsed quality metrics currently exist for head and neck cancer. The authors identified patients with surgically treated, invasive, head and neck squamous cell carcinoma in the National Cancer Data Base from 2004 to 2014 and compared the rate of adherence to 5 different quality metrics and whether compliance with these quality metrics impacted overall survival. The metrics examined included negative surgical margins, neck dissection lymph node (LN) yield ≥ 18, appropriate adjuvant radiation, appropriate adjuvant chemoradiation, adjuvant therapy within 6 weeks, as well as overall quality. In total, 76,853 eligible patients were identified. There was substantial variability in patient-level adherence, which was 80% for negative surgical margins, 73.1% for neck dissection LN yield, 69% for adjuvant radiation, 42.6% for adjuvant chemoradiation, and 44.5% for adjuvant therapy within 6 weeks. Risk-adjusted Cox proportional-hazard models indicated that all metrics were associated with a reduced risk of death: negative margins (hazard ratio [HR] 0.73; 95% confidence interval [CI], 0.71-0.76), LN yield ≥ 18 (HR, 0.93; 95% CI, 0.89-0.96), adjuvant radiation (HR, 0.67; 95% CI, 0.64-0.70), adjuvant chemoradiation (HR, 0.84; 95% CI, 0.79-0.88), and adjuvant therapy ≤6 weeks (HR, 0.92; 95% CI, 0.89-0.96). Patients who received high-quality care had a 19% reduced adjusted hazard of mortality (HR, 0.81; 95% CI, 0.79-0.83). Five head and neck cancer quality metrics were identified that have substantial variability in adherence and meaningfully impact overall survival. These metrics are appropriate candidates for national adoption. Cancer 2017;123:4372-81. © 2017 American Cancer Society. © 2017 American Cancer Society.

The metrics of science and technology

CERN Document Server

Geisler, Eliezer

2000-01-01

Dr. Geisler's far-reaching, unique book provides an encyclopedic compilation of the key metrics to measure and evaluate the impact of science and technology on academia, industry, and government. Focusing on such items as economic measures, patents, peer review, and other criteria, and supported by an extensive review of the literature, Dr. Geisler gives a thorough analysis of the strengths and weaknesses inherent in metric design, and in the use of the specific metrics he cites. His book has already received prepublication attention, and will prove especially valuable for academics in technology management, engineering, and science policy; industrial R&D executives and policymakers; government science and technology policymakers; and scientists and managers in government research and technology institutions. Geisler maintains that the application of metrics to evaluate science and technology at all levels illustrates the variety of tools we currently possess. Each metric has its own unique strengths and...

Extending cosmology: the metric approach

OpenAIRE

Mendoza, S.

2012-01-01

Comment: 2012, Extending Cosmology: The Metric Approach, Open Questions in Cosmology; Review article for an Intech "Open questions in cosmology" book chapter (19 pages, 3 figures). Available from: http://www.intechopen.com/books/open-questions-in-cosmology/extending-cosmology-the-metric-approach

Metrics, Media and Advertisers: Discussing Relationship

Directory of Open Access Journals (Sweden)

Marco Aurelio de Souza Rodrigues

2014-11-01

Full Text Available This study investigates how Brazilian advertisers are adapting to new media and its attention metrics. In-depth interviews were conducted with advertisers in 2009 and 2011. In 2009, new media and its metrics were celebrated as innovations that would increase advertising campaigns overall efficiency. In 2011, this perception has changed: New media’s profusion of metrics, once seen as an advantage, started to compromise its ease of use and adoption. Among its findings, this study argues that there is an opportunity for media groups willing to shift from a product-focused strategy towards a customer-centric one, through the creation of new, simple and integrative metrics. 

Measuring Information Security: Guidelines to Build Metrics

Science.gov (United States)

von Faber, Eberhard

Measuring information security is a genuine interest of security managers. With metrics they can develop their security organization's visibility and standing within the enterprise or public authority as a whole. Organizations using information technology need to use security metrics. Despite the clear demands and advantages, security metrics are often poorly developed or ineffective parameters are collected and analysed. This paper describes best practices for the development of security metrics. First attention is drawn to motivation showing both requirements and benefits. The main body of this paper lists things which need to be observed (characteristic of metrics), things which can be measured (how measurements can be conducted) and steps for the development and implementation of metrics (procedures and planning). Analysis and communication is also key when using security metrics. Examples are also given in order to develop a better understanding. The author wants to resume, continue and develop the discussion about a topic which is or increasingly will be a critical factor of success for any security managers in larger organizations.

Active Metric Learning for Supervised Classification

OpenAIRE

Kumaran, Krishnan; Papageorgiou, Dimitri; Chang, Yutong; Li, Minhan; Takáč, Martin

2018-01-01

Clustering and classification critically rely on distance metrics that provide meaningful comparisons between data points. We present mixed-integer optimization approaches to find optimal distance metrics that generalize the Mahalanobis metric extensively studied in the literature. Additionally, we generalize and improve upon leading methods by removing reliance on pre-designated "target neighbors," "triplets," and "similarity pairs." Another salient feature of our method is its ability to en...

Do daily ward interviews improve measurement of hospital quality and safety indicators? A prospective observational study.

Science.gov (United States)

Sarkies, Mitchell N; Bowles, Kelly-Ann; Skinner, Elizabeth H; Haas, Romi; Mitchell, Deb; O'Brien, Lisa; May, Kerry; Ghaly, Marcelle; Ho, Melissa; Haines, Terry P

2016-10-01

The aim of this study was to determine if the addition of daily ward interview data improves the capture of hospital quality and safety indicators compared with incident reporting systems alone. An additional aim was to determine the potential characteristics influencing under-reporting of hospital quality and safety indicators in incident reporting systems. A prospective, observational study was performed at two tertiary metropolitan public hospitals. Research assistants from allied health backgrounds met daily with the nurse in charge of the ward and discussed the occurrence of any falls, pressure injuries and rapid response medical team calls. Data were collected from four general medical wards, four surgical wards, an orthopaedic, neurosciences, plastics, respiratory, renal, sub-acute and acute medical assessment unit. An estimated total of 303 falls, 221 pressure injuries and 884 rapid response medical team calls occurred between 15 wards across two hospitals, over a period of 6 months. Hospital incident reporting systems underestimated falls by 30.0%, pressure injuries by 59.3% and rapid response medical team calls by 17.0%. The use of ward interview data collection in addition to hospital incident reporting systems improved data capture of falls by 23.8% (n = 72), pressure injuries by 21.7% (n = 48) and rapid response medical team calls by 12.7% (n = 112). Falls events were significantly less likely to be reported if they occurred on a Monday (P = 0.04) and pressure injuries significantly more likely to be reported if they occurred on a Wednesday (P = 0.01). Hospital quality and safety indicators (falls, pressure injuries and rapid response medical team calls) were under-reported in incident reporting systems, with variability in under-reporting between wards and the day of event occurrence. The use of ward interview data collection in addition to hospital incident reporting systems improved reporting of hospital quality and safety

FACTORS AND METRICS THAT INFLUENCE FRANCHISEE PERFORMANCE: AN APPROACH BASED ON BRAZILIAN FRANCHISES

OpenAIRE

Aguiar, Helder de Souza; Consoni, Flavia

2017-01-01

The article searches to map the manager’s decisions in order to understand what has been the franchisor system for choose regarding to characteristics, and what the metrics has been adopted to measure the performance Though 15 interviews with Brazilian franchise there was confirmation that revenue is the main metric used by national franchises to measure performance, although other indicators are also used in a complementary way. In addition, two other factors were cited by the interviewees a...

Data-driven management using quantitative metric and automatic auditing program (QMAP) improves consistency of radiation oncology processes.

Science.gov (United States)

Yu, Naichang; Xia, Ping; Mastroianni, Anthony; Kolar, Matthew D; Chao, Samuel T; Greskovich, John F; Suh, John H

Process consistency in planning and delivery of radiation therapy is essential to maintain patient safety and treatment quality and efficiency. Ensuring the timely completion of each critical clinical task is one aspect of process consistency. The purpose of this work is to report our experience in implementing a quantitative metric and automatic auditing program (QMAP) with a goal of improving the timely completion of critical clinical tasks. Based on our clinical electronic medical records system, we developed a software program to automatically capture the completion timestamp of each critical clinical task while providing frequent alerts of potential delinquency. These alerts were directed to designated triage teams within a time window that would offer an opportunity to mitigate the potential for late completion. Since July 2011, 18 metrics were introduced in our clinical workflow. We compared the delinquency rates for 4 selected metrics before the implementation of the metric with the delinquency rate of 2016. One-tailed Student t test was used for statistical analysis RESULTS: With an average of 150 daily patients on treatment at our main campus, the late treatment plan completion rate and late weekly physics check were reduced from 18.2% and 8.9% in 2011 to 4.2% and 0.1% in 2016, respectively (P < .01). The late weekly on-treatment physician visit rate was reduced from 7.2% in 2012 to <1.6% in 2016. The yearly late cone beam computed tomography review rate was reduced from 1.6% in 2011 to <0.1% in 2016. QMAP is effective in reducing late completions of critical tasks, which can positively impact treatment quality and patient safety by reducing the potential for errors resulting from distractions, interruptions, and rush in completion of critical tasks. Copyright © 2016 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.

Wireless sensor network performance metrics for building applications

Energy Technology Data Exchange (ETDEWEB)

Jang, W.S. (Department of Civil Engineering Yeungnam University 214-1 Dae-Dong, Gyeongsan-Si Gyeongsangbuk-Do 712-749 South Korea); Healy, W.M. [Building and Fire Research Laboratory, 100 Bureau Drive, Gaithersburg, MD 20899-8632 (United States)

2010-06-15

Metrics are investigated to help assess the performance of wireless sensors in buildings. Wireless sensor networks present tremendous opportunities for energy savings and improvement in occupant comfort in buildings by making data about conditions and equipment more readily available. A key barrier to their adoption, however, is the uncertainty among users regarding the reliability of the wireless links through building construction. Tests were carried out that examined three performance metrics as a function of transmitter-receiver separation distance, transmitter power level, and obstruction type. These tests demonstrated, via the packet delivery rate, a clear transition from reliable to unreliable communications at different separation distances. While the packet delivery rate is difficult to measure in actual applications, the received signal strength indication correlated well with the drop in packet delivery rate in the relatively noise-free environment used in these tests. The concept of an equivalent distance was introduced to translate the range of reliability in open field operation to that seen in a typical building, thereby providing wireless system designers a rough estimate of the necessary spacing between sensor nodes in building applications. It is anticipated that the availability of straightforward metrics on the range of wireless sensors in buildings will enable more widespread sensing in buildings for improved control and fault detection. (author)

Citation metrics of excellence in sports biomechanics research.

Science.gov (United States)

Knudson, Duane

2017-11-13

This study extended research on key citation metrics of winners of two career scholar awards in sports biomechanics. Google Scholar (GS) was searched using Harzing's Publish or Perish software for the 13 most recent winners of the ISBS Geoffrey Dyson Award and the ASB Jim Hay Memorial Award. Returned records were corrected for author, and publications excluded for all but peer-reviewed journal articles, proceedings articles, chapters and books in English. These recent award winners had published about 150 publications that had been cited typically 4,082 and 6,648 times over a 26- and 28-year period before receiving these career awards for sports biomechanics research. Estimated median citations at time of their awards were 2,927 and 4,907 for the Dyson and Hay awards, respectively. Award winners had mean Hirsh indexes of 32-45 and mean h i of 19-28. Their mean g indexes (59-84) and their numerous citation classics (C > 100) indicated that they had many influential publications. The citation metrics of these scholars were outstanding and consistent with recent studies of top scholars in biomechanics and kinesiology/exercise science. Careful searching, cleaning and interpretation of several scholar-level citation metrics may provide useful confirmatory evidence for evaluations of awards committees.

Metrics for Polyphonic Sound Event Detection

Directory of Open Access Journals (Sweden)

Annamaria Mesaros

2016-05-01

Full Text Available This paper presents and discusses various metrics proposed for evaluation of polyphonic sound event detection systems used in realistic situations where there are typically multiple sound sources active simultaneously. The system output in this case contains overlapping events, marked as multiple sounds detected as being active at the same time. The polyphonic system output requires a suitable procedure for evaluation against a reference. Metrics from neighboring fields such as speech recognition and speaker diarization can be used, but they need to be partially redefined to deal with the overlapping events. We present a review of the most common metrics in the field and the way they are adapted and interpreted in the polyphonic case. We discuss segment-based and event-based definitions of each metric and explain the consequences of instance-based and class-based averaging using a case study. In parallel, we provide a toolbox containing implementations of presented metrics.

Robustness Metrics: Consolidating the multiple approaches to quantify Robustness

DEFF Research Database (Denmark)

Göhler, Simon Moritz; Eifler, Tobias; Howard, Thomas J.

2016-01-01

robustness metrics; 3) Functional expectancy and dispersion robustness metrics; and 4) Probability of conformance robustness metrics. The goal was to give a comprehensive overview of robustness metrics and guidance to scholars and practitioners to understand the different types of robustness metrics...

Common Metrics for Human-Robot Interaction

Science.gov (United States)

Steinfeld, Aaron; Lewis, Michael; Fong, Terrence; Scholtz, Jean; Schultz, Alan; Kaber, David; Goodrich, Michael

2006-01-01

This paper describes an effort to identify common metrics for task-oriented human-robot interaction (HRI). We begin by discussing the need for a toolkit of HRI metrics. We then describe the framework of our work and identify important biasing factors that must be taken into consideration. Finally, we present suggested common metrics for standardization and a case study. Preparation of a larger, more detailed toolkit is in progress.

Improving benchmarking by using an explicit framework for the development of composite indicators: an example using pediatric quality of care

Science.gov (United States)

2010-01-01

Background The measurement of healthcare provider performance is becoming more widespread. Physicians have been guarded about performance measurement, in part because the methodology for comparative measurement of care quality is underdeveloped. Comprehensive quality improvement will require comprehensive measurement, implying the aggregation of multiple quality metrics into composite indicators. Objective To present a conceptual framework to develop comprehensive, robust, and transparent composite indicators of pediatric care quality, and to highlight aspects specific to quality measurement in children. Methods We reviewed the scientific literature on composite indicator development, health systems, and quality measurement in the pediatric healthcare setting. Frameworks were selected for explicitness and applicability to a hospital-based measurement system. Results We synthesized various frameworks into a comprehensive model for the development of composite indicators of quality of care. Among its key premises, the model proposes identifying structural, process, and outcome metrics for each of the Institute of Medicine's six domains of quality (safety, effectiveness, efficiency, patient-centeredness, timeliness, and equity) and presents a step-by-step framework for embedding the quality of care measurement model into composite indicator development. Conclusions The framework presented offers researchers an explicit path to composite indicator development. Without a scientifically robust and comprehensive approach to measurement of the quality of healthcare, performance measurement will ultimately fail to achieve its quality improvement goals. PMID:20181129

The use of safety indicators, complementary to dose and risk, in the assessment of radioactive waste disposal

International Nuclear Information System (INIS)

Gera, F.; Vovk, I.; Wingefors, S.

1998-01-01

The use of safety indicators, other than dose and risk, to complement the safety assessment of disposal systems for radioactive waste, is not a new idea. Several possible approaches have been proposed through the years, including a discussion in an IAEA document of 1994. The present paper reviews critically the various proposed indicators, identifies the most promising ones and suggests a possible approach for the assessment of their viability. In particular it suggests that a Coordinated Research Project should be organized with the main objectives of assembling, reviewing and generating the necessary scientific information on natural values, particularly fluxes and concentrations of pollutants, and on their impacts on public health and environmental quality. (author)

Microbial quality of agricultural water in Central Florida

OpenAIRE

Topalcengiz, Zeynal; Strawn, Laura K.; Danyluk, Michelle D.

2017-01-01

The microbial quality of water that comes into the edible portion of produce is believed to directly relate to the safety of produce, and metrics describing indicator organisms are commonly used to ensure safety. The US FDA Produce Safety Rule (PSR) sets very specific microbiological water quality metrics for agricultural water that contacts the harvestable portion of produce. Validation of these metrics for agricultural water is essential for produce safety. Water samples (500 mL) from six a...

Narrowing the Gap Between QoS Metrics and Web QoE Using Above-the-fold Metrics

OpenAIRE

da Hora, Diego Neves; Asrese, Alemnew; Christophides, Vassilis; Teixeira, Renata; Rossi, Dario

2018-01-01

International audience; Page load time (PLT) is still the most common application Quality of Service (QoS) metric to estimate the Quality of Experience (QoE) of Web users. Yet, recent literature abounds with proposals for alternative metrics (e.g., Above The Fold, SpeedIndex and variants) that aim at better estimating user QoE. The main purpose of this work is thus to thoroughly investigate a mapping between established and recently proposed objective metrics and user QoE. We obtain ground tr...

Development of composite indicator of Ukraine’s international reserves adequacy

Directory of Open Access Journals (Sweden)

Mykhaylo Makarenko

2015-11-01

Full Text Available This paper develops an indicator for estimating international reserves adequacy in Ukraine taking into account its unique characteristics. The proposed indicator was constructed based on the modification of IMF adequacy metric by changing weighting coefficients of potential balance of payments vulnerabilities based on historical data for Ukraine and by the inclusion of import as an additional component. In comparison to the IMF metric our indicator implies greater international reserves. This is due to the fact that balance of payments of Ukraine is very sensitive to current account shocks such as worsening terms of trade so our indicator except import component has increased weighting coefficient of export earnings. Also, compared to the IMF metrics our indicator provides more weighting coefficients of the other portfolio liabilities and the money supply that represents the sensitivity to financial account shocks. Reduced weighting coefficient of the short-term debt could be explained by the partial refinancing of external debt. This new indicator suggests that the accumulated levels of reserves of Ukraine have been inadequate at 1 April 2015.

Is road safety management linked to road safety performance?

Science.gov (United States)

Papadimitriou, Eleonora; Yannis, George

2013-10-01

This research aims to explore the relationship between road safety management and road safety performance at country level. For that purpose, an appropriate theoretical framework is selected, namely the 'SUNflower' pyramid, which describes road safety management systems in terms of a five-level hierarchy: (i) structure and culture, (ii) programmes and measures, (iii) 'intermediate' outcomes'--safety performance indicators (SPIs), (iv) final outcomes--fatalities and injuries, and (v) social costs. For each layer of the pyramid, a composite indicator is implemented, on the basis of data for 30 European countries. Especially as regards road safety management indicators, these are estimated on the basis of Categorical Principal Component Analysis upon the responses of a dedicated road safety management questionnaire, jointly created and dispatched by the ETSC/PIN group and the 'DaCoTA' research project. Then, quasi-Poisson models and Beta regression models are developed for linking road safety management indicators and other indicators (i.e. background characteristics, SPIs) with road safety performance. In this context, different indicators of road safety performance are explored: mortality and fatality rates, percentage reduction in fatalities over a given period, a composite indicator of road safety final outcomes, and a composite indicator of 'intermediate' outcomes (SPIs). The results of the analyses suggest that road safety management can be described on the basis of three composite indicators: "vision and strategy", "budget, evaluation and reporting", and "measurement of road user attitudes and behaviours". Moreover, no direct statistical relationship could be established between road safety management indicators and final outcomes. However, a statistical relationship was found between road safety management and 'intermediate' outcomes, which were in turn found to affect 'final' outcomes, confirming the SUNflower approach on the consecutive effect of each layer

The Unfolding MD Simulations of Cyclophilin: Analyzed by Surface Contact Networks and Their Associated Metrics

Science.gov (United States)

Roy, Sourav; Basu, Sankar; Dasgupta, Dipak; Bhattacharyya, Dhananjay; Banerjee, Rahul

2015-01-01

Currently, considerable interest exists with regard to the dissociation of close packed aminoacids within proteins, in the course of unfolding, which could result in either wet or dry moltenglobules. The progressive disjuncture of residues constituting the hydrophobic core ofcyclophilin from L. donovani (LdCyp) has been studied during the thermal unfolding of the molecule, by molecular dynamics simulations. LdCyp has been represented as a surface contactnetwork (SCN) based on the surface complementarity (Sm) of interacting residues within themolecular interior. The application of Sm to side chain packing within proteins make it a very sensitive indicator of subtle perturbations in packing, in the thermal unfolding of the protein. Network based metrics have been defined to track the sequential changes in the disintegration ofthe SCN spanning the hydrophobic core of LdCyp and these metrics prove to be highly sensitive compared to traditional metrics in indicating the increased conformational (and dynamical) flexibility in the network. These metrics have been applied to suggest criteria distinguishing DMG, WMG and transition state ensembles and to identify key residues involved in crucial conformational/topological events during the unfolding process. PMID:26545107

Contribution to a quantitative assessment model for reliability-based metrics of electronic and programmable safety-related functions; Contribution a un modele d'evaluation quantitative des performances fiabilistes de fonctions electroniques et programmables dediees a la securite

Energy Technology Data Exchange (ETDEWEB)

Hamidi, K

2005-10-15

The use of fault-tolerant EP architectures has induced growing constraints, whose influence on reliability-based performance metrics is no more negligible. To face up the growing influence of simultaneous failure, this thesis proposes, for safety-related functions, a new-trend assessment method of reliability, based on a better taking into account of time-aspect. This report introduces the concept of information and uses it to interpret the failure modes of safety-related function as the direct result of the initiation and propagation of erroneous information until the actuator-level. The main idea is to distinguish the apparition and disappearance of erroneous states, which could be defined as intrinsically dependent of HW-characteristic and maintenance policies, and their possible activation, constrained through architectural choices, leading to the failure of safety-related function. This approach is based on a low level on deterministic SED models of the architecture and use non homogeneous Markov chains to depict the time-evolution of probabilities of errors. (author)

Factor structure of the Tomimatsu-Sato metrics

International Nuclear Information System (INIS)

Perjes, Z.

1989-02-01

Based on an earlier result stating that δ = 3 Tomimatsu-Sato (TS) metrics can be factored over the field of integers, an analogous representation for higher TS metrics was sought. It is shown that the factoring property of TS metrics follows from the structure of special Hankel determinants. A set of linear algebraic equations determining the factors was defined, and the factors of the first five TS metrics were tabulated, together with their primitive factors. (R.P.) 4 refs.; 2 tabs

Indicators for traffic safety assessment and prediction and their application in micro-simulation modelling : a study of urban and suburban intersections

OpenAIRE

Archer, Jeffery

2005-01-01

In order to achieve sustainable long-term transport infrastructure development, there is a growing need for fast, reliable and effective methods to evaluate and predict the impact of traffic safety measures. Recognising this need, and the need for an active traffic safety approach, this thesis focuses on traffic safety assessment and prediction based on the use of safety indicators that measure the spatial and/or temporal proximity of safety critical events. The main advantage of such measure...

Estimated work ability in warm outdoor environments depends on the chosen heat stress assessment metric

Science.gov (United States)

Bröde, Peter; Fiala, Dusan; Lemke, Bruno; Kjellstrom, Tord

2018-03-01

With a view to occupational effects of climate change, we performed a simulation study on the influence of different heat stress assessment metrics on estimated workability (WA) of labour in warm outdoor environments. Whole-day shifts with varying workloads were simulated using as input meteorological records for the hottest month from four cities with prevailing hot (Dallas, New Delhi) or warm-humid conditions (Managua, Osaka), respectively. In addition, we considered the effects of adaptive strategies like shielding against solar radiation and different work-rest schedules assuming an acclimated person wearing light work clothes (0.6 clo). We assessed WA according to Wet Bulb Globe Temperature (WBGT) by means of an empirical relation of worker performance from field studies (Hothaps), and as allowed work hours using safety threshold limits proposed by the corresponding standards. Using the physiological models Predicted Heat Strain (PHS) and Universal Thermal Climate Index (UTCI)-Fiala, we calculated WA as the percentage of working hours with body core temperature and cumulated sweat loss below standard limits (38 °C and 7.5% of body weight, respectively) recommended by ISO 7933 and below conservative (38 °C; 3%) and liberal (38.2 °C; 7.5%) limits in comparison. ANOVA results showed that the different metrics, workload, time of day and climate type determined the largest part of WA variance. WBGT-based metrics were highly correlated and indicated slightly more constrained WA for moderate workload, but were less restrictive with high workload and for afternoon work hours compared to PHS and UTCI-Fiala. Though PHS showed unrealistic dynamic responses to rest from work compared to UTCI-Fiala, differences in WA assessed by the physiological models largely depended on the applied limit criteria. In conclusion, our study showed that the choice of the heat stress assessment metric impacts notably on the estimated WA. Whereas PHS and UTCI-Fiala can account for

ST-intuitionistic fuzzy metric space with properties

Science.gov (United States)

Arora, Sahil; Kumar, Tanuj

2017-07-01

In this paper, we define ST-intuitionistic fuzzy metric space and the notion of convergence and completeness properties of cauchy sequences is studied. Further, we prove some properties of ST-intuitionistic fuzzy metric space. Finally, we introduce the concept of symmetric ST Intuitionistic Fuzzy metric space.

A Practitioners’ Perspective on Developmental Models, Metrics and Community

Directory of Open Access Journals (Sweden)

Chad Stewart

2009-12-01

Full Text Available This article builds on a paper by Stein and Heikkinen (2009, and suggestsways to expand and improve our measurement of the quality of the developmentalmodels, metrics and instruments and the results we get in collaborating with clients. Wesuggest that this dialogue needs to be about more than stage development measured by(even calibrated stage development-focused, linguistic-based, developmental psychologymetrics that produce lead indicators and are shown to be reliable and valid bypsychometric qualities alone. The article first provides a brief overview of ourbackground and biases, and an applied version of Ken Wilber’s Integral OperatingSystem that has provided increased development, client satisfaction, and contribution toour communities measured by verifiable, tangible results (as well as intangible resultssuch as increased ability to cope with complex surroundings, reduced stress and growthin developmental stages to better fit to the environment in which our clients wereengaged at that time. It then addresses four key points raised by Stein and Heikkinen(need for quality control, defining and deciding on appropriate metrics, building a systemto evaluate models and metrics, and clarifying and increasing the reliability and validityof the models and metrics we use by providing initial concrete steps to:• Adopt a systemic value-chain approach• Measure results in addition to language• Build on the evaluation system for instruments, models and metrics suggested byStein & Heikkinen• Clarify and improve the reliability and validity of the instruments, models andmetrics we useWe complete the article with an echoing call for the community of AppliedDevelopmental Theory suggested by Ross (2008 and Stein and Heikkinen, a briefdescription of that community (from our perspective, and a table that builds on Table 2proposed by Stein and Heikkinen.

Comparing alternative and traditional dissemination metrics in medical education.

Science.gov (United States)

Amath, Aysah; Ambacher, Kristin; Leddy, John J; Wood, Timothy J; Ramnanan, Christopher J

2017-09-01

The impact of academic scholarship has traditionally been measured using citation-based metrics. However, citations may not be the only measure of impact. In recent years, other platforms (e.g. Twitter) have provided new tools for promoting scholarship to both academic and non-academic audiences. Alternative metrics (altmetrics) can capture non-traditional dissemination data such as attention generated on social media platforms. The aims of this exploratory study were to characterise the relationships among altmetrics, access counts and citations in an international and pre-eminent medical education journal, and to clarify the roles of these metrics in assessing the impact of medical education academic scholarship. A database study was performed (September 2015) for all papers published in Medical Education in 2012 (n = 236) and 2013 (n = 246). Citation, altmetric and access (HTML views and PDF downloads) data were obtained from Scopus, the Altmetric Bookmarklet tool and the journal Medical Education, respectively. Pearson coefficients (r-values) between metrics of interest were then determined. Twitter and Mendeley (an academic bibliography tool) were the only altmetric-tracked platforms frequently (> 50%) utilised in the dissemination of articles. Altmetric scores (composite measures of all online attention) were driven by Twitter mentions. For short and full-length articles in 2012 and 2013, both access counts and citation counts were most strongly correlated with one another, as well as with Mendeley downloads. By comparison, Twitter metrics and altmetric scores demonstrated weak to moderate correlations with both access and citation counts. Whereas most altmetrics showed limited correlations with readership (access counts) and impact (citations), Mendeley downloads correlated strongly with both readership and impact indices for articles published in the journal Medical Education and may therefore have potential use that is complementary to that of citations in

Pragmatic security metrics applying metametrics to information security

CERN Document Server

Brotby, W Krag

2013-01-01

Other books on information security metrics discuss number theory and statistics in academic terms. Light on mathematics and heavy on utility, PRAGMATIC Security Metrics: Applying Metametrics to Information Security breaks the mold. This is the ultimate how-to-do-it guide for security metrics.Packed with time-saving tips, the book offers easy-to-follow guidance for those struggling with security metrics. Step by step, it clearly explains how to specify, develop, use, and maintain an information security measurement system (a comprehensive suite of metrics) to

Evaluation of the Quality of Occupational Health and Safety Management Systems Based on Key Performance Indicators in Certified Organizations.

Science.gov (United States)

Mohammadfam, Iraj; Kamalinia, Mojtaba; Momeni, Mansour; Golmohammadi, Rostam; Hamidi, Yadollah; Soltanian, Alireza

2017-06-01

Occupational Health and Safety Management Systems are becoming more widespread in organizations. Consequently, their effectiveness has become a core topic for researchers. This paper evaluates the performance of the Occupational Health and Safety Assessment Series 18001 specification in certified companies in Iran. The evaluation is based on a comparison of specific criteria and indictors related to occupational health and safety management practices in three certified and three noncertified companies. Findings indicate that the performance of certified companies with respect to occupational health and safety management practices is significantly better than that of noncertified companies. Occupational Health and Safety Assessment Series 18001-certified companies have a better level of occupational health and safety; this supports the argument that Occupational Health and Safety Management Systems play an important strategic role in health and safety in the workplace.

Defining a Progress Metric for CERT RMM Improvement

Science.gov (United States)

2017-09-14

REV-03.18.2016.0 Defining a Progress Metric for CERT-RMM Improvement Gregory Crabb Nader Mehravari David Tobar September 2017 TECHNICAL ...fendable resource allocation decisions. Technical metrics measure aspects of controls implemented through technology (systems, soft- ware, hardware...implementation metric would be the percentage of users who have received anti-phishing training . • Effectiveness/efficiency metrics measure whether

Metrical Phonology: German Sound System.

Science.gov (United States)

Tice, Bradley S.

Metrical phonology, a linguistic process of phonological stress assessment and diagrammatic simplification of sentence and word stress, is discussed as it is found in the English and German languages. The objective is to promote use of metrical phonology as a tool for enhancing instruction in stress patterns in words and sentences, particularly in…

Construction of Einstein-Sasaki metrics in D≥7

International Nuclear Information System (INIS)

Lue, H.; Pope, C. N.; Vazquez-Poritz, J. F.

2007-01-01

We construct explicit Einstein-Kaehler metrics in all even dimensions D=2n+4≥6, in terms of a 2n-dimensional Einstein-Kaehler base metric. These are cohomogeneity 2 metrics which have the new feature of including a NUT-type parameter, or gravomagnetic charge, in addition to..' in addition to mass and rotation parameters. Using a canonical construction, these metrics all yield Einstein-Sasaki metrics in dimensions D=2n+5≥7. As is commonly the case in this type of construction, for suitable choices of the free parameters the Einstein-Sasaki metrics can extend smoothly onto complete and nonsingular manifolds, even though the underlying Einstein-Kaehler metric has conical singularities. We discuss some explicit examples in the case of seven-dimensional Einstein-Sasaki spaces. These new spaces can provide supersymmetric backgrounds in M theory, which play a role in the AdS 4 /CFT 3 correspondence

National Metrical Types in Nineteenth Century Art Song

Directory of Open Access Journals (Sweden)

Leigh VanHandel

2010-01-01

Full Text Available William Rothstein’s article “National metrical types in music of the eighteenth and early nineteenth centuries” (2008 proposes a distinction between the metrical habits of 18th and early 19th century German music and those of Italian and French music of that period. Based on theoretical treatises and compositional practice, he outlines these national metrical types and discusses the characteristics of each type. This paper presents the results of a study designed to determine whether, and to what degree, Rothstein’s characterizations of national metrical types are present in 19th century French and German art song. Studying metrical habits in this genre may provide a lens into changing metrical conceptions of 19th century theorists and composers, as well as to the metrical habits and compositional style of individual 19th century French and German art song composers.

A Metric on Phylogenetic Tree Shapes.

Science.gov (United States)

Colijn, C; Plazzotta, G

2018-01-01

The shapes of evolutionary trees are influenced by the nature of the evolutionary process but comparisons of trees from different processes are hindered by the challenge of completely describing tree shape. We present a full characterization of the shapes of rooted branching trees in a form that lends itself to natural tree comparisons. We use this characterization to define a metric, in the sense of a true distance function, on tree shapes. The metric distinguishes trees from random models known to produce different tree shapes. It separates trees derived from tropical versus USA influenza A sequences, which reflect the differing epidemiology of tropical and seasonal flu. We describe several metrics based on the same core characterization, and illustrate how to extend the metric to incorporate trees' branch lengths or other features such as overall imbalance. Our approach allows us to construct addition and multiplication on trees, and to create a convex metric on tree shapes which formally allows computation of average tree shapes. © The Author(s) 2017. Published by Oxford University Press, on behalf of the Society of Systematic Biologists.

Healthcare waste management practices and safety indicators in Nigeria.

Science.gov (United States)

Oyekale, Abayomi Samuel; Oyekale, Tolulope Olayemi

2017-09-25

Adequate management of healthcare waste (HCW) is a prerequisite for efficient delivery of healthcare services. In Nigeria, there are several constraints militating against proper management of HCW. This is raising some environmental concerns among stakeholders in the health sector. In this study, we analyzed the practices of HCW management and determinants of risky/safe indices of HCW disposal. The study used the 2013/2014 Service Delivery Indicator (SDI) data that were collected from 2480 healthcare facilities in Nigeria. Descriptive statistics, Principal Component Analysis (PCA) and Ordinary Least Square (OLS) regression were used to analyze the data. The results showed that 52.20% and 38.21% of the sampled healthcare facilities from Cross River and Bauchi states possessed guidelines for HCW management, respectively. Trainings on management of HCW were attended by 67.18% and 53.19% of the healthcare facilities from Cross River and Imo states, respectively. Also, 32.32% and 29.50% of healthcare facilities from rural and urban areas previously sent some of their staff members for trainings on HCW management, respectively. Sharp and non-sharp HCW were burnt in protected pits in 45.40% and 45.36% of all the sampled healthcare facilities, respectively. Incinerators were reported to be functional in only 2.06% of the total healthcare facilities. In Bauchi and Kebbi states, 23.58% and 21.05% of the healthcare facilities respectively burnt sharp HCW without any protection. Using PCA, computed risky indices for disposal of sharp HCW were highest in Bayelsa state (0.3070) and Kebbi state (0.2172), while indices of risky disposal of non-sharp HCW were highest in Bayelsa state (0.2868) and Osun state (0.2652). The OLS results showed that at 5% level of significance, possession of medical waste disposal guidelines, staff trainings on HCW management, traveling hours from the facilities to local headquarters and being located in rural areas significantly influenced indices of

Healthcare waste management practices and safety indicators in Nigeria

Directory of Open Access Journals (Sweden)

Abayomi Samuel Oyekale

2017-09-01

rural areas significantly influenced indices of risky/safe medical waste disposal (p < 0.05. Conclusion The study concluded that there was low compliance with standard HCW management. It was recommended that possession of HCW management guidelines, staff training on HCW disposal and provision of requisite equipment for proper treatment of HCW would promote environmental safety in HCW disposal.

Degraded visual environment image/video quality metrics

Science.gov (United States)

Baumgartner, Dustin D.; Brown, Jeremy B.; Jacobs, Eddie L.; Schachter, Bruce J.

2014-06-01

A number of image quality metrics (IQMs) and video quality metrics (VQMs) have been proposed in the literature for evaluating techniques and systems for mitigating degraded visual environments. Some require both pristine and corrupted imagery. Others require patterned target boards in the scene. None of these metrics relates well to the task of landing a helicopter in conditions such as a brownout dust cloud. We have developed and used a variety of IQMs and VQMs related to the pilot's ability to detect hazards in the scene and to maintain situational awareness. Some of these metrics can be made agnostic to sensor type. Not only are the metrics suitable for evaluating algorithm and sensor variation, they are also suitable for choosing the most cost effective solution to improve operating conditions in degraded visual environments.

A framework for quantification of groundwater dynamics - redundancy and transferability of hydro(geo-)logical metrics

Science.gov (United States)

Heudorfer, Benedikt; Haaf, Ezra; Barthel, Roland; Stahl, Kerstin

2017-04-01

A new framework for quantification of groundwater dynamics has been proposed in a companion study (Haaf et al., 2017). In this framework, a number of conceptual aspects of dynamics, such as seasonality, regularity, flashiness or inter-annual forcing, are described, which are then linked to quantitative metrics. Hereby, a large number of possible metrics are readily available from literature, such as Pardé Coefficients, Colwell's Predictability Indices or Base Flow Index. In the present work, we focus on finding multicollinearity and in consequence redundancy among the metrics representing different patterns of dynamics found in groundwater hydrographs. This is done also to verify the categories of dynamics aspects suggested by Haaf et al., 2017. To determine the optimal set of metrics we need to balance the desired minimum number of metrics and the desired maximum descriptive property of the metrics. To do this, a substantial number of candidate metrics are applied to a diverse set of groundwater hydrographs from France, Germany and Austria within the northern alpine and peri-alpine region. By applying Principle Component Analysis (PCA) to the correlation matrix of the metrics, we determine a limited number of relevant metrics that describe the majority of variation in the dataset. The resulting reduced set of metrics comprise an optimized set that can be used to describe the aspects of dynamics that were identified within the groundwater dynamics framework. For some aspects of dynamics a single significant metric could be attributed. Other aspects have a more fuzzy quality that can only be described by an ensemble of metrics and are re-evaluated. The PCA is furthermore applied to groups of groundwater hydrographs containing regimes of similar behaviour in order to explore transferability when applying the metric-based characterization framework to groups of hydrographs from diverse groundwater systems. In conclusion, we identify an optimal number of metrics

Determining supply chain safety stock level and location

Directory of Open Access Journals (Sweden)

Bahareh Amirjabbari

2014-01-01

Full Text Available Purpose: The lean methodology and its principles have widely been applied in supply chain management in recent decades. Manufacturers are one of the most important contributors in a supply chain and inventory plays a paramount role for them to become lean. Therefore, there should be appropriate management of inventory and all of its drivers in accordance with a lean strategy. Safety stock is one of the main drivers of inventory; it protects against increasing the stretch in the breaking points of the supply chain, which in turn can result in possible reduction of inventory. In this paper an optimization model and a simulation model are developed and applied in a real case to optimize the safety stock level with the objective of logistics cost minimization.Design/methodology/approach: In order to optimize the safety stock level while minimizing logistics costs, a nonlinear cost minimization safety stock model is developed in this paper and then it is applied in a real world manufacturing case company. A safety stock simulation model based on appropriate metrics in the case company’s supply chain performance is also provided.Findings: These models result in not only the optimum levels but also locations of safety stock within the supply chain.Originality/value: In this research, two models of cost minimization and simulation have been developed and also applied in a real case company to result in not only optimized levels but also optimized locations of safety stock across the whole supply chain. In addition, the appropriate supply chain performance measurement metrics have been introduced in this paper and the simulation model is developed based on those.

Climate Classification is an Important Factor in ­Assessing Hospital Performance Metrics

Science.gov (United States)

Boland, M. R.; Parhi, P.; Gentine, P.; Tatonetti, N. P.

2017-12-01

Context/Purpose: Climate is a known modulator of disease, but its impact on hospital performance metrics remains unstudied. Methods: We assess the relationship between Köppen-Geiger climate classification and hospital performance metrics, specifically 30-day mortality, as reported in Hospital Compare, and collected for the period July 2013 through June 2014 (7/1/2013 - 06/30/2014). A hospital-level multivariate linear regression analysis was performed while controlling for known socioeconomic factors to explore the relationship between all-cause mortality and climate. Hospital performance scores were obtained from 4,524 hospitals belonging to 15 distinct Köppen-Geiger climates and 2,373 unique counties. Results: Model results revealed that hospital performance metrics for mortality showed significant climate dependence (psocioeconomic factors. Interpretation: Currently, hospitals are reimbursed by Governmental agencies using 30-day mortality rates along with 30-day readmission rates. These metrics allow Government agencies to rank hospitals according to their `performance' along these metrics. Various socioeconomic factors are taken into consideration when determining individual hospitals performance. However, no climate-based adjustment is made within the existing framework. Our results indicate that climate-based variability in 30-day mortality rates does exist even after socioeconomic confounder adjustment. Use of standardized high-level climate classification systems (such as Koppen-Geiger) would be useful to incorporate in future metrics. Conclusion: Climate is a significant factor in evaluating hospital 30-day mortality rates. These results demonstrate that climate classification is an important factor when comparing hospital performance across the United States.

The Jacobi metric for timelike geodesics in static spacetimes

Science.gov (United States)

Gibbons, G. W.

2016-01-01

It is shown that the free motion of massive particles moving in static spacetimes is given by the geodesics of an energy-dependent Riemannian metric on the spatial sections analogous to Jacobi's metric in classical dynamics. In the massless limit Jacobi's metric coincides with the energy independent Fermat or optical metric. For stationary metrics, it is known that the motion of massless particles is given by the geodesics of an energy independent Finslerian metric of Randers type. The motion of massive particles is governed by neither a Riemannian nor a Finslerian metric. The properies of the Jacobi metric for massive particles moving outside the horizon of a Schwarschild black hole are described. By constrast with the massless case, the Gaussian curvature of the equatorial sections is not always negative.

Relaxed metrics and indistinguishability operators: the relationship

Energy Technology Data Exchange (ETDEWEB)

Martin, J.

2017-07-01

In 1982, the notion of indistinguishability operator was introduced by E. Trillas in order to fuzzify the crisp notion of equivalence relation (/cite{Trillas}). In the study of such a class of operators, an outstanding property must be pointed out. Concretely, there exists a duality relationship between indistinguishability operators and metrics. The aforesaid relationship was deeply studied by several authors that introduced a few techniques to generate metrics from indistinguishability operators and vice-versa (see, for instance, /cite{BaetsMesiar,BaetsMesiar2}). In the last years a new generalization of the metric notion has been introduced in the literature with the purpose of developing mathematical tools for quantitative models in Computer Science and Artificial Intelligence (/cite{BKMatthews,Ma}). The aforementioned generalized metrics are known as relaxed metrics. The main target of this talk is to present a study of the duality relationship between indistinguishability operators and relaxed metrics in such a way that the aforementioned classical techniques to generate both concepts, one from the other, can be extended to the new framework. (Author)

Contribution to a quantitative assessment model for reliability-based metrics of electronic and programmable safety-related functions; Contribution a un modele d'evaluation quantitative des performances fiabilistes de fonctions electroniques et programmables dediees a la securite

Energy Technology Data Exchange (ETDEWEB)

Hamidi, K

2005-10-15

The use of fault-tolerant EP architectures has induced growing constraints, whose influence on reliability-based performance metrics is no more negligible. To face up the growing influence of simultaneous failure, this thesis proposes, for safety-related functions, a new-trend assessment method of reliability, based on a better taking into account of time-aspect. This report introduces the concept of information and uses it to interpret the failure modes of safety-related function as the direct result of the initiation and propagation of erroneous information until the actuator-level. The main idea is to distinguish the apparition and disappearance of erroneous states, which could be defined as intrinsically dependent of HW-characteristic and maintenance policies, and their possible activation, constrained through architectural choices, leading to the failure of safety-related function. This approach is based on a low level on deterministic SED models of the architecture and use non homogeneous Markov chains to depict the time-evolution of probabilities of errors. (author)

Classification in medical images using adaptive metric k-NN

Science.gov (United States)

Chen, C.; Chernoff, K.; Karemore, G.; Lo, P.; Nielsen, M.; Lauze, F.

2010-03-01

The performance of the k-nearest neighborhoods (k-NN) classifier is highly dependent on the distance metric used to identify the k nearest neighbors of the query points. The standard Euclidean distance is commonly used in practice. This paper investigates the performance of k-NN classifier with respect to different adaptive metrics in the context of medical imaging. We propose using adaptive metrics such that the structure of the data is better described, introducing some unsupervised learning knowledge in k-NN. We investigated four different metrics are estimated: a theoretical metric based on the assumption that images are drawn from Brownian Image Model (BIM), the normalized metric based on variance of the data, the empirical metric is based on the empirical covariance matrix of the unlabeled data, and an optimized metric obtained by minimizing the classification error. The spectral structure of the empirical covariance also leads to Principal Component Analysis (PCA) performed on it which results the subspace metrics. The metrics are evaluated on two data sets: lateral X-rays of the lumbar aortic/spine region, where we use k-NN for performing abdominal aorta calcification detection; and mammograms, where we use k-NN for breast cancer risk assessment. The results show that appropriate choice of metric can improve classification.

Evaluating Modeled Impact Metrics for Human Health, Agriculture Growth, and Near-Term Climate

Science.gov (United States)

Seltzer, K. M.; Shindell, D. T.; Faluvegi, G.; Murray, L. T.

2017-12-01

Simulated metrics that assess impacts on human health, agriculture growth, and near-term climate were evaluated using ground-based and satellite observations. The NASA GISS ModelE2 and GEOS-Chem models were used to simulate the near-present chemistry of the atmosphere. A suite of simulations that varied by model, meteorology, horizontal resolution, emissions inventory, and emissions year were performed, enabling an analysis of metric sensitivities to various model components. All simulations utilized consistent anthropogenic global emissions inventories (ECLIPSE V5a or CEDS), and an evaluation of simulated results were carried out for 2004-2006 and 2009-2011 over the United States and 2014-2015 over China. Results for O3- and PM2.5-based metrics featured minor differences due to the model resolutions considered here (2.0° × 2.5° and 0.5° × 0.666°) and model, meteorology, and emissions inventory each played larger roles in variances. Surface metrics related to O3 were consistently high biased, though to varying degrees, demonstrating the need to evaluate particular modeling frameworks before O3 impacts are quantified. Surface metrics related to PM2.5 were diverse, indicating that a multimodel mean with robust results are valuable tools in predicting PM2.5-related impacts. Oftentimes, the configuration that captured the change of a metric best over time differed from the configuration that captured the magnitude of the same metric best, demonstrating the challenge in skillfully simulating impacts. These results highlight the strengths and weaknesses of these models in simulating impact metrics related to air quality and near-term climate. With such information, the reliability of historical and future simulations can be better understood.

Experiential space is hardly metric

Czech Academy of Sciences Publication Activity Database

Šikl, Radovan; Šimeček, Michal; Lukavský, Jiří

2008-01-01

Roč. 2008, č. 37 (2008), s. 58-58 ISSN 0301-0066. [European Conference on Visual Perception. 24.08-28.08.2008, Utrecht] R&D Projects: GA ČR GA406/07/1676 Institutional research plan: CEZ:AV0Z70250504 Keywords : visual space perception * metric and non-metric perceptual judgments * ecological validity Subject RIV: AN - Psychology

High resolution metric imaging payload

Science.gov (United States)

Delclaud, Y.

2017-11-01

Alcatel Space Industries has become Europe's leader in the field of high and very high resolution optical payloads, in the frame work of earth observation system able to provide military government with metric images from space. This leadership allowed ALCATEL to propose for the export market, within a French collaboration frame, a complete space based system for metric observation.

The Role and Quality of Software Safety in the NASA Constellation Program

Science.gov (United States)

Layman, Lucas; Basili, Victor R.; Zelkowitz, Marvin V.

2010-01-01

In this study, we examine software safety risk in the early design phase of the NASA Constellation spaceflight program. Obtaining an accurate, program-wide picture of software safety risk is difficult across multiple, independently-developing systems. We leverage one source of safety information, hazard analysis, to provide NASA quality assurance managers with information regarding the ongoing state of software safety across the program. The goal of this research is two-fold: 1) to quantify the relative importance of software with respect to system safety; and 2) to quantify the level of risk presented by software in the hazard analysis. We examined 154 hazard reports created during the preliminary design phase of three major flight hardware systems within the Constellation program. To quantify the importance of software, we collected metrics based on the number of software-related causes and controls of hazardous conditions. To quantify the level of risk presented by software, we created a metric scheme to measure the specificity of these software causes. We found that from 49-70% of hazardous conditions in the three systems could be caused by software or software was involved in the prevention of the hazardous condition. We also found that 12-17% of the 2013 hazard causes involved software, and that 23-29% of all causes had a software control. Furthermore, 10-12% of all controls were software-based. There is potential for inaccuracy in these counts, however, as software causes are not consistently scoped, and the presence of software in a cause or control is not always clear. The application of our software specificity metrics also identified risks in the hazard reporting process. In particular, we found a number of traceability risks in the hazard reports may impede verification of software and system safety.

Data Quality Indicators Composition and Calculus: Engineering and Information Systems Approaches

Directory of Open Access Journals (Sweden)

Leon REZNIK

2015-02-01

Full Text Available Big Data phenomenon is a result of novel technological developments in sensor, computer and communication technologies. Nowadays more and more data are produced by nanoscale photonic, optoelectronic and electronic devices. However, their quality characteristics could be very low. The paper proposes new methods of the data management with huge data amounts that is based on associating of data quality indicators with each data entity. To achieve this goal, one needs to define the composition of the data quality indicators and to develop their integration calculus. As data quality evaluation involves multi-disciplinary research, various metrics have been investigated. The paper describes two major approaches in assigning the data quality indicators and developing their integration calculus. The information systems approach employs traditional high-level metrics like data accuracy, consistency and completeness. The engineering approach utilizes signal characteristics processed with the probability based calculus. The data quality metrics composition and calculus are discussed. The tools developed to automate the metrics selection and calculus procedures are presented. The user- friendly interface examples are provided.

Indicators of Nuclear safety and exploitation in ANAV; Indicadores de Seguridad Nuclear y explotacion en ANAV

Energy Technology Data Exchange (ETDEWEB)

Quintana Prieto, M.; Jorda Alcove, M.

2013-07-01

The use of indicators by ANAV plants, aims to be a tool to facilitate the assessment of the behaviour of the plants nuclear over a specific time period. The following are and are they explain those related to Nuclear safety and exploitation.

Performance of different metrics proposed to CIE TC 1-91

Directory of Open Access Journals (Sweden)

Pramod Bhusal

2017-12-01

Full Text Available The main aim of the article is to find out the performance of different metrics proposed to CIE TC 1-91. Currently, six different indexes have been proposed to CIE TC 1-91: Colour Quality Scale (CQS, Feeling of Contrast Index (FCI, Memory colour rendering index (MCRI, Preference of skin (PS, Relative gamut area index (RGAI and Illuminating Engineering society Method for evaluating light source colour rendition (IES TM-30. The evaluation and analysis are based on previously conducted experiment in lighting booth. The analysis showed the area based metric FCI was good subjective preference indicator. The subjective preference was measured in terms of naturalness of objects, colourfulness of colour checker chart, and the visual appearance of the lit scene in the booth.

Automating the Generation of Heterogeneous Aviation Safety Cases

Science.gov (United States)

Denney, Ewen W.; Pai, Ganesh J.; Pohl, Josef M.

2012-01-01

A safety case is a structured argument, supported by a body of evidence, which provides a convincing and valid justification that a system is acceptably safe for a given application in a given operating environment. This report describes the development of a fragment of a preliminary safety case for the Swift Unmanned Aircraft System. The construction of the safety case fragment consists of two parts: a manually constructed system-level case, and an automatically constructed lower-level case, generated from formal proof of safety-relevant correctness properties. We provide a detailed discussion of the safety considerations for the target system, emphasizing the heterogeneity of sources of safety-relevant information, and use a hazard analysis to derive safety requirements, including formal requirements. We evaluate the safety case using three classes of metrics for measuring degrees of coverage, automation, and understandability. We then present our preliminary conclusions and make suggestions for future work.

Using Complexity Metrics With R-R Intervals and BPM Heart Rate Measures

DEFF Research Database (Denmark)

Wallot, Sebastian; Fusaroli, Riccardo; Tylén, Kristian

2013-01-01

Lately, growing attention in the health sciences has been paid to the dynamics of heart rate as indicator of impending failures and for prognoses. Likewise, in social and cognitive sciences, heart rate is increasingly employed as a measure of arousal, emotional engagement and as a marker of inter......Lately, growing attention in the health sciences has been paid to the dynamics of heart rate as indicator of impending failures and for prognoses. Likewise, in social and cognitive sciences, heart rate is increasingly employed as a measure of arousal, emotional engagement and as a marker...... of interpersonal coordination. However, there is no consensus about which measurements and analytical tools are most appropriate in mapping the temporal dynamics of heart rate and quite different metrics are reported in the literature. As complexity metrics of heart rate variability depend critically...

Smart Grid Status and Metrics Report Appendices

Energy Technology Data Exchange (ETDEWEB)

Balducci, Patrick J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Antonopoulos, Chrissi A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Clements, Samuel L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gorrissen, Willy J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kirkham, Harold [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ruiz, Kathleen A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Smith, David L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Weimar, Mark R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gardner, Chris [APQC, Houston, TX (United States); Varney, Jeff [APQC, Houston, TX (United States)

2014-07-01

A smart grid uses digital power control and communication technology to improve the reliability, security, flexibility, and efficiency of the electric system, from large generation through the delivery systems to electricity consumers and a growing number of distributed generation and storage resources. To convey progress made in achieving the vision of a smart grid, this report uses a set of six characteristics derived from the National Energy Technology Laboratory Modern Grid Strategy. The Smart Grid Status and Metrics Report defines and examines 21 metrics that collectively provide insight into the grid’s capacity to embody these characteristics. This appendix presents papers covering each of the 21 metrics identified in Section 2.1 of the Smart Grid Status and Metrics Report. These metric papers were prepared in advance of the main body of the report and collectively form its informational backbone.

Machine learning classifier using abnormal brain network topological metrics in major depressive disorder.

Science.gov (United States)

Guo, Hao; Cao, Xiaohua; Liu, Zhifen; Li, Haifang; Chen, Junjie; Zhang, Kerang

2012-12-05

Resting state functional brain networks have been widely studied in brain disease research. However, it is currently unclear whether abnormal resting state functional brain network metrics can be used with machine learning for the classification of brain diseases. Resting state functional brain networks were constructed for 28 healthy controls and 38 major depressive disorder patients by thresholding partial correlation matrices of 90 regions. Three nodal metrics were calculated using graph theory-based approaches. Nonparametric permutation tests were then used for group comparisons of topological metrics, which were used as classified features in six different algorithms. We used statistical significance as the threshold for selecting features and measured the accuracies of six classifiers with different number of features. A sensitivity analysis method was used to evaluate the importance of different features. The result indicated that some of the regions exhibited significantly abnormal nodal centralities, including the limbic system, basal ganglia, medial temporal, and prefrontal regions. Support vector machine with radial basis kernel function algorithm and neural network algorithm exhibited the highest average accuracy (79.27 and 78.22%, respectively) with 28 features (Pdisorder is associated with abnormal functional brain network topological metrics and statistically significant nodal metrics can be successfully used for feature selection in classification algorithms.

Exposure data and risk indicators for safety performance assessment in Europe.

Science.gov (United States)

Papadimitriou, Eleonora; Yannis, George; Bijleveld, Frits; Cardoso, João L

2013-11-01

The objective of this paper is the analysis of the state-of-the-art in risk indicators and exposure data for safety performance assessment in Europe, in terms of data availability, collection methodologies and use. More specifically, the concepts of exposure and risk are explored, as well as the theoretical properties of various exposure measures used in road safety research (e.g. vehicle- and person-kilometres of travel, vehicle fleet, road length, driver population, time spent in traffic, etc.). Moreover, the existing methods for collecting disaggregate exposure data for risk estimates at national level are presented and assessed, including survey methods (e.g. travel surveys, traffic counts) and databases (e.g. national registers). A detailed analysis of the availability and quality of existing risk exposure data is also carried out. More specifically, the results of a questionnaire survey in the European countries are presented, with detailed information on exposure measures available, their possible disaggregations (i.e. variables and values), their conformity to standard definitions and the characteristics of their national collection methods. Finally, the potential of international risk comparisons is investigated, mainly through the International Data Files with exposure data (e.g. Eurostat, IRTAD, ECMT, UNECE, IRF, etc.). The results of this review confirm that comparing risk rates at international level may be a complex task, as the availability and quality of exposure estimates in European countries varies significantly. The lack of a common framework for the collection and exploitation of exposure data limits significantly the comparability of the national data. On the other hand, the International Data Files containing exposure data provide useful statistics and estimates in a systematic way and are currently the only sources allowing international comparisons of road safety performance under certain conditions. Copyright © 2013 Elsevier Ltd. All

Implications of Metric Choice for Common Applications of Readmission Metrics

OpenAIRE

Davies, Sheryl; Saynina, Olga; Schultz, Ellen; McDonald, Kathryn M; Baker, Laurence C

2013-01-01

Objective. To quantify the differential impact on hospital performance of three readmission metrics: all-cause readmission (ACR), 3M Potential Preventable Readmission (PPR), and Centers for Medicare and Medicaid 30-day readmission (CMS).

Classifying indicators of quality: a collaboration between Dutch and English regulators.

Science.gov (United States)

Mears, Alex; Vesseur, Jan; Hamblin, Richard; Long, Paul; Den Ouden, Lya

2011-12-01

Many approaches to measuring quality in healthcare exist, generally employing indicators or metrics. While there are important differences, most of these approaches share three key areas of measurement: safety, effectiveness and patient experience. The European Partnership for Supervisory Organisations in Health Services and Social Care (EPSO) exists as a working group and discussion forum for European regulators. This group undertook to identify a common framework within which European approaches to indicators could be compared. A framework was developed to classify indicators, using four sets of criteria: conceptualization of quality, Donabedian definition (structure, process, outcome), data type (derivable, collectable from routine sources, special collections, samples) and data use (judgement (singular or part of framework) benchmarking, risk assessment). Indicators from English and Dutch hospital measurement programmes were put into the framework, showing areas of agreement and levels of comparability. In the first instance, results are only illustrative. The EPSO has been a powerful driver for undertaking cross-European research, and this project is the first of many to take advantage of the access to international expertize. It has shown that through development of a framework that deconstructs national indicators, commonalities can be identified. Future work will attempt to incorporate other nations' indicators, and attempt cross-national comparison.

TU-EF-BRD-02: Indicators and Technique Analysis

Energy Technology Data Exchange (ETDEWEB)

Carlone, M. [Princess Margaret Hospital (Canada)

2015-06-15

Research related to quality and safety has been a staple of medical physics academic activities for a long time. From very early on, medical physicists have developed new radiation measurement equipment and analysis techniques, created ever increasingly accurate dose calculation models, and have vastly improved imaging, planning, and delivery techniques. These and other areas of interest have improved the quality and safety of radiotherapy for our patients. With the advent of TG-100, quality and safety is an area that will garner even more research interest in the future. As medical physicists pursue quality and safety research in greater numbers, it is worthwhile to consider what actually constitutes research on quality and safety. For example, should the development of algorithms for real-time EPID-based in-vivo dosimetry be defined as “quality and safety” research? How about the clinical implementation of such as system? Surely the application of failure modes and effects analysis to a clinical process would be considered quality and safety research, but is this type of research that should be included in the medical physics peer-reviewed literature? The answers to such questions are of critical importance to set researchers in a direction that will provide the greatest benefit to our field and the patients we serve. The purpose of this symposium is to consider what constitutes research in the arena of quality and safety and differentiate it from other research directions. The key distinction here is developing the tool itself (e.g. algorithms for EPID dosimetry) vs. studying the impact of the tool with some quantitative metric. Only the latter would I call quality and safety research. Issues of ‘basic’ versus ‘applied’ quality and safety research will be covered as well as how the research results should be structured to provide increasing levels of support that a quality and safety intervention is effective and sustainable. Examples from existing

TU-EF-BRD-02: Indicators and Technique Analysis

International Nuclear Information System (INIS)

Carlone, M.

2015-01-01

Research related to quality and safety has been a staple of medical physics academic activities for a long time. From very early on, medical physicists have developed new radiation measurement equipment and analysis techniques, created ever increasingly accurate dose calculation models, and have vastly improved imaging, planning, and delivery techniques. These and other areas of interest have improved the quality and safety of radiotherapy for our patients. With the advent of TG-100, quality and safety is an area that will garner even more research interest in the future. As medical physicists pursue quality and safety research in greater numbers, it is worthwhile to consider what actually constitutes research on quality and safety. For example, should the development of algorithms for real-time EPID-based in-vivo dosimetry be defined as “quality and safety” research? How about the clinical implementation of such as system? Surely the application of failure modes and effects analysis to a clinical process would be considered quality and safety research, but is this type of research that should be included in the medical physics peer-reviewed literature? The answers to such questions are of critical importance to set researchers in a direction that will provide the greatest benefit to our field and the patients we serve. The purpose of this symposium is to consider what constitutes research in the arena of quality and safety and differentiate it from other research directions. The key distinction here is developing the tool itself (e.g. algorithms for EPID dosimetry) vs. studying the impact of the tool with some quantitative metric. Only the latter would I call quality and safety research. Issues of ‘basic’ versus ‘applied’ quality and safety research will be covered as well as how the research results should be structured to provide increasing levels of support that a quality and safety intervention is effective and sustainable. Examples from existing

Metrics for building performance assurance

Energy Technology Data Exchange (ETDEWEB)

Koles, G.; Hitchcock, R.; Sherman, M.

1996-07-01

This report documents part of the work performed in phase I of a Laboratory Directors Research and Development (LDRD) funded project entitled Building Performance Assurances (BPA). The focus of the BPA effort is to transform the way buildings are built and operated in order to improve building performance by facilitating or providing tools, infrastructure, and information. The efforts described herein focus on the development of metrics with which to evaluate building performance and for which information and optimization tools need to be developed. The classes of building performance metrics reviewed are (1) Building Services (2) First Costs, (3) Operating Costs, (4) Maintenance Costs, and (5) Energy and Environmental Factors. The first category defines the direct benefits associated with buildings; the next three are different kinds of costs associated with providing those benefits; the last category includes concerns that are broader than direct costs and benefits to the building owner and building occupants. The level of detail of the various issues reflect the current state of knowledge in those scientific areas and the ability of the to determine that state of knowledge, rather than directly reflecting the importance of these issues; it intentionally does not specifically focus on energy issues. The report describes work in progress and is intended as a resource and can be used to indicate the areas needing more investigation. Other reports on BPA activities are also available.

Prognostic Performance Metrics

Data.gov (United States)

National Aeronautics and Space Administration — This chapter presents several performance metrics for offline evaluation of prognostics algorithms. A brief overview of different methods employed for performance...

The use of uranium fluxes as safety indicators of radioactive waste repositories

International Nuclear Information System (INIS)

Miller, W.M.; Hooker, P.J.

2002-01-01

Natural analogues based on uranium deposits are commonly used to represent the long-term behaviour of radioactive waste repositories or the processes that influence their radioactive contents. The geochemical dispersion of naturally occurring uranium can also be used to model natural radioactivity fluxes in the vicinity of a planned repository. These fluxes can be estimated for erosional and groundwater discharge processes and compared with calculated future fluxes of radioactivity that would be released from a repository. The methodology is outlined and the benefits of the approach for supporting the derivation of a safety case for a repository are indicated. (author)

Adaptive metric kernel regression

DEFF Research Database (Denmark)

Goutte, Cyril; Larsen, Jan

2000-01-01

Kernel smoothing is a widely used non-parametric pattern recognition technique. By nature, it suffers from the curse of dimensionality and is usually difficult to apply to high input dimensions. In this contribution, we propose an algorithm that adapts the input metric used in multivariate...... regression by minimising a cross-validation estimate of the generalisation error. This allows to automatically adjust the importance of different dimensions. The improvement in terms of modelling performance is illustrated on a variable selection task where the adaptive metric kernel clearly outperforms...

Development of safety assessment of nuclear power plants using indicators; Ydinvoimalaitosten turvallisuuden arvioinnin kehittaeminen tunnuslukujen avulla

Energy Technology Data Exchange (ETDEWEB)

Tiippana, P.

1997-11-01

The study is based on an indicator system which is under development at the Radiation and Nuclear Safety Authority (STUK). The goal of this study was to define and develop both PSA-based indicators and indicators from failure statistics. As PSA-based indicators the possibility was studied to define and express the risk importance of exemptions from the Technical Specifications, failures, preventive maintenance and other disconnections of devices covered by the Technical Specifications, operating events covered by Guide YVL 1.5 and plant modifications. In this piece of research the applicability of plant specific living PSA-models used for calculation of indicators was examined. The research included both Loviisa and Olkiluoto nuclear power plants in Finland. 47 refs.

Principle of space existence and De Sitter metric

International Nuclear Information System (INIS)

Mal'tsev, V.K.

1990-01-01

The selection principle for the solutions of the Einstein equations suggested in a series of papers implies the existence of space (g ik ≠ 0) only in the presence of matter (T ik ≠0). This selection principle (principle of space existence, in the Markov terminology) implies, in the general case, the absence of the cosmological solution with the De Sitter metric. On the other hand, the De Sitter metric is necessary for describing both inflation and deflation periods of the Universe. It is shown that the De Sitter metric is also allowed by the selection principle under discussion if the metric experiences the evolution into the Friedmann metric

What can article-level metrics do for you?

Science.gov (United States)

Fenner, Martin

2013-10-01

Article-level metrics (ALMs) provide a wide range of metrics about the uptake of an individual journal article by the scientific community after publication. They include citations, usage statistics, discussions in online comments and social media, social bookmarking, and recommendations. In this essay, we describe why article-level metrics are an important extension of traditional citation-based journal metrics and provide a number of example from ALM data collected for PLOS Biology.

About the possibility of a generalized metric

International Nuclear Information System (INIS)

Lukacs, B.; Ladik, J.

1991-10-01

The metric (the structure of the space-time) may be dependent on the properties of the object measuring it. The case of size dependence of the metric was examined. For this dependence the simplest possible form of the metric tensor has been constructed which fulfils the following requirements: there be two extremal characteristic scales; the metric be unique and the usual between them; the change be sudden in the neighbourhood of these scales; the size of the human body appear as a parameter (postulated on the basis of some philosophical arguments). Estimates have been made for the two extremal length scales according to existing observations. (author) 19 refs

Adaptive Metric Kernel Regression

DEFF Research Database (Denmark)

Goutte, Cyril; Larsen, Jan

1998-01-01

Kernel smoothing is a widely used nonparametric pattern recognition technique. By nature, it suffers from the curse of dimensionality and is usually difficult to apply to high input dimensions. In this paper, we propose an algorithm that adapts the input metric used in multivariate regression...... by minimising a cross-validation estimate of the generalisation error. This allows one to automatically adjust the importance of different dimensions. The improvement in terms of modelling performance is illustrated on a variable selection task where the adaptive metric kernel clearly outperforms the standard...

Ideal Based Cyber Security Technical Metrics for Control Systems

Energy Technology Data Exchange (ETDEWEB)

W. F. Boyer; M. A. McQueen

2007-10-01

Much of the world's critical infrastructure is at risk from attack through electronic networks connected to control systems. Security metrics are important because they provide the basis for management decisions that affect the protection of the infrastructure. A cyber security technical metric is the security relevant output from an explicit mathematical model that makes use of objective measurements of a technical object. A specific set of technical security metrics are proposed for use by the operators of control systems. Our proposed metrics are based on seven security ideals associated with seven corresponding abstract dimensions of security. We have defined at least one metric for each of the seven ideals. Each metric is a measure of how nearly the associated ideal has been achieved. These seven ideals provide a useful structure for further metrics development. A case study shows how the proposed metrics can be applied to an operational control system.

Metrics to assess ecological condition, change, and impacts in sandy beach ecosystems.

Science.gov (United States)

Schlacher, Thomas A; Schoeman, David S; Jones, Alan R; Dugan, Jenifer E; Hubbard, David M; Defeo, Omar; Peterson, Charles H; Weston, Michael A; Maslo, Brooke; Olds, Andrew D; Scapini, Felicita; Nel, Ronel; Harris, Linda R; Lucrezi, Serena; Lastra, Mariano; Huijbers, Chantal M; Connolly, Rod M

2014-11-01

Complexity is increasingly the hallmark in environmental management practices of sandy shorelines. This arises primarily from meeting growing public demands (e.g., real estate, recreation) whilst reconciling economic demands with expectations of coastal users who have modern conservation ethics. Ideally, shoreline management is underpinned by empirical data, but selecting ecologically-meaningful metrics to accurately measure the condition of systems, and the ecological effects of human activities, is a complex task. Here we construct a framework for metric selection, considering six categories of issues that authorities commonly address: erosion; habitat loss; recreation; fishing; pollution (litter and chemical contaminants); and wildlife conservation. Possible metrics were scored in terms of their ability to reflect environmental change, and against criteria that are widely used for judging the performance of ecological indicators (i.e., sensitivity, practicability, costs, and public appeal). From this analysis, four types of broadly applicable metrics that also performed very well against the indicator criteria emerged: 1.) traits of bird populations and assemblages (e.g., abundance, diversity, distributions, habitat use); 2.) breeding/reproductive performance sensu lato (especially relevant for birds and turtles nesting on beaches and in dunes, but equally applicable to invertebrates and plants); 3.) population parameters and distributions of vertebrates associated primarily with dunes and the supralittoral beach zone (traditionally focused on birds and turtles, but expandable to mammals); 4.) compound measurements of the abundance/cover/biomass of biota (plants, invertebrates, vertebrates) at both the population and assemblage level. Local constraints (i.e., the absence of birds in highly degraded urban settings or lack of dunes on bluff-backed beaches) and particular issues may require alternatives. Metrics - if selected and applied correctly - provide

Characterising risk - aggregated metrics: radiation and noise

International Nuclear Information System (INIS)

Passchier, W.

1998-01-01

The characterisation of risk is an important phase in the risk assessment - risk management process. From the multitude of risk attributes a few have to be selected to obtain a risk characteristic or profile that is useful for risk management decisions and implementation of protective measures. One way to reduce the number of attributes is aggregation. In the field of radiation protection such an aggregated metric is firmly established: effective dose. For protection against environmental noise the Health Council of the Netherlands recently proposed a set of aggregated metrics for noise annoyance and sleep disturbance. The presentation will discuss similarities and differences between these two metrics and practical limitations. The effective dose has proven its usefulness in designing radiation protection measures, which are related to the level of risk associated with the radiation practice in question, given that implicit judgements on radiation induced health effects are accepted. However, as the metric does not take into account the nature of radiation practice, it is less useful in policy discussions on the benefits and harm of radiation practices. With respect to the noise exposure metric, only one effect is targeted (annoyance), and the differences between sources are explicitly taken into account. This should make the metric useful in policy discussions with respect to physical planning and siting problems. The metric proposed has only significance on a population level, and can not be used as a predictor for individual risk. (author)

Supplier selection using different metric functions

Directory of Open Access Journals (Sweden)

Omosigho S.E.

2015-01-01

Full Text Available Supplier selection is an important component of supply chain management in today’s global competitive environment. Hence, the evaluation and selection of suppliers have received considerable attention in the literature. Many attributes of suppliers, other than cost, are considered in the evaluation and selection process. Therefore, the process of evaluation and selection of suppliers is a multi-criteria decision making process. The methodology adopted to solve the supplier selection problem is intuitionistic fuzzy TOPSIS (Technique for Order Preference by Similarity to the Ideal Solution. Generally, TOPSIS is based on the concept of minimum distance from the positive ideal solution and maximum distance from the negative ideal solution. We examine the deficiencies of using only one metric function in TOPSIS and propose the use of spherical metric function in addition to the commonly used metric functions. For empirical supplier selection problems, more than one metric function should be used.

77 FR 12832 - Non-RTO/ISO Performance Metrics; Commission Staff Request Comments on Performance Metrics for...

Science.gov (United States)

2012-03-02

... Performance Metrics; Commission Staff Request Comments on Performance Metrics for Regions Outside of RTOs and... performance communicate about the benefits of RTOs and, where appropriate, (2) changes that need to be made to... common set of performance measures for markets both within and outside of ISOs/RTOs. As recommended by...

Regional Sustainability: The San Luis Basin Metrics Project

Science.gov (United States)

There are a number of established, scientifically supported metrics of sustainability. Many of the metrics are data intensive and require extensive effort to collect data and compute. Moreover, individual metrics may not capture all aspects of a system that are relevant to sust...

Idaho National Laboratory Integrated Safety Management System FY 2016 Effectiveness Review and Declaration Report

International Nuclear Information System (INIS)

Hunt, Farren J.

2016-01-01

Idaho National Laboratory's (INL's) Integrated Safety Management System (ISMS) effectiveness review of fiscal year (FY) 2016 shows that INL has integrated management programs and safety elements throughout the oversight and operational activities performed at INL. The significant maturity of Contractor Assurance System (CAS) processes, as demonstrated across INL's management systems and periodic reporting through the Management Review Meeting process, over the past two years has provided INL with current real-time understanding and knowledge pertaining to the health of the institution. INL's sustained excellence of the Integrated Safety and effective implementation of the Worker Safety and Health Program is also evidenced by other external validations and key indicators. In particular, external validations include VPP, ISO 14001, DOELAP accreditation, and key Laboratory level indicators such as ORPS (number, event frequency and severity); injury/illness indicators such as Days Away, Restricted and Transfer (DART) case rate, back & shoulder metric and open reporting indicators, demonstrate a continuous positive trend and therefore improved operational performance over the last few years. These indicators are also reflective of the Laboratory's overall organizational and safety culture improvement. Notably, there has also been a step change in ESH&Q Leadership actions that have been recognized both locally and complex-wide. Notwithstanding, Laboratory management continues to monitor and take action on lower level negative trends in numerous areas including: Conduct of Operations, Work Control, Work Site Analysis, Risk Assessment, LO/TO, Fire Protection, and Life Safety Systems, to mention a few. While the number of severe injury cases has decreased, as evidenced by the reduction in the DART case rate, the two hand injuries and the fire truck/ambulance accident were of particular concern. Aggressive actions continue in order to understand the causes and define actions

Idaho National Laboratory Integrated Safety Management System FY 2016 Effectiveness Review and Declaration Report

Energy Technology Data Exchange (ETDEWEB)

Hunt, Farren J. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-12-01

Idaho National Laboratory’s (INL’s) Integrated Safety Management System (ISMS) effectiveness review of fiscal year (FY) 2016 shows that INL has integrated management programs and safety elements throughout the oversight and operational activities performed at INL. The significant maturity of Contractor Assurance System (CAS) processes, as demonstrated across INL’s management systems and periodic reporting through the Management Review Meeting process, over the past two years has provided INL with current real-time understanding and knowledge pertaining to the health of the institution. INL’s sustained excellence of the Integrated Safety and effective implementation of the Worker Safety and Health Program is also evidenced by other external validations and key indicators. In particular, external validations include VPP, ISO 14001, DOELAP accreditation, and key Laboratory level indicators such as ORPS (number, event frequency and severity); injury/illness indicators such as Days Away, Restricted and Transfer (DART) case rate, back & shoulder metric and open reporting indicators, demonstrate a continuous positive trend and therefore improved operational performance over the last few years. These indicators are also reflective of the Laboratory’s overall organizational and safety culture improvement. Notably, there has also been a step change in ESH&Q Leadership actions that have been recognized both locally and complex-wide. Notwithstanding, Laboratory management continues to monitor and take action on lower level negative trends in numerous areas including: Conduct of Operations, Work Control, Work Site Analysis, Risk Assessment, LO/TO, Fire Protection, and Life Safety Systems, to mention a few. While the number of severe injury cases has decreased, as evidenced by the reduction in the DART case rate, the two hand injuries and the fire truck/ambulance accident were of particular concern. Aggressive actions continue in order to understand the causes and

Cosmological implications of modified gravity induced by quantum metric fluctuations

Energy Technology Data Exchange (ETDEWEB)

Liu, Xing [Sun Yat-Sen University, School of Physics, Guangzhou (China); Sun Yat-Sen University, Yat Sen School, Guangzhou (China); Harko, Tiberiu [Babes-Bolyai University, Department of Physics, Cluj-Napoca (Romania); University College London, Department of Mathematics, London (United Kingdom); Liang, Shi-Dong [Sun Yat-Sen University, School of Physics, Guangzhou (China); Sun Yat-Sen University, State Key Laboratory of Optoelectronic Material and Technology, Guangdong Province Key Laboratory of Display Material and Technology, School of Physics, Guangzhou (China)

2016-08-15

We investigate the cosmological implications of modified gravities induced by the quantum fluctuations of the gravitational metric. If the metric can be decomposed as the sum of the classical and of a fluctuating part, of quantum origin, then the corresponding Einstein quantum gravity generates at the classical level modified gravity models with a non-minimal coupling between geometry and matter. As a first step in our study, after assuming that the expectation value of the quantum correction can be generally expressed in terms of an arbitrary second order tensor constructed from the metric and from the thermodynamic quantities characterizing the matter content of the Universe, we derive the (classical) gravitational field equations in their general form. We analyze in detail the cosmological models obtained by assuming that the quantum correction tensor is given by the coupling of a scalar field and of a scalar function to the metric tensor, and by a term proportional to the matter energy-momentum tensor. For each considered model we obtain the gravitational field equations, and the generalized Friedmann equations for the case of a flat homogeneous and isotropic geometry. In some of these models the divergence of the matter energy-momentum tensor is non-zero, indicating a process of matter creation, which corresponds to an irreversible energy flow from the gravitational field to the matter fluid, and which is direct consequence of the non-minimal curvature-matter coupling. The cosmological evolution equations of these modified gravity models induced by the quantum fluctuations of the metric are investigated in detail by using both analytical and numerical methods, and it is shown that a large variety of cosmological models can be constructed, which, depending on the numerical values of the model parameters, can exhibit both accelerating and decelerating behaviors. (orig.)

Probabilistic metric spaces

CERN Document Server

Schweizer, B

2005-01-01

Topics include special classes of probabilistic metric spaces, topologies, and several related structures, such as probabilistic normed and inner-product spaces. 1983 edition, updated with 3 new appendixes. Includes 17 illustrations.

Domestic water service delivery indicators and frameworks for monitoring, evaluation, policy and planning: a review.

Science.gov (United States)

Kayser, Georgia L; Moriarty, Patrick; Fonseca, Catarina; Bartram, Jamie

2013-10-11

Monitoring of water services informs policy and planning for national governments and the international community. Currently, the international monitoring system measures the type of drinking water source that households use. There have been calls for improved monitoring systems over several decades, some advocating use of multiple indicators. We review the literature on water service indicators and frameworks with a view to informing debate on their relevance to national and international monitoring. We describe the evidence concerning the relevance of each identified indicator to public health, economic development and human rights. We analyze the benefits and challenges of using these indicators separately and combined in an index as tools for planning, monitoring, and evaluating water services. We find substantial evidence on the importance of each commonly recommended indicator--service type, safety, quantity, accessibility, reliability or continuity of service, equity, and affordability. Several frameworks have been proposed that give structure to the relationships among individual indicators and some combine multiple indicator scores into a single index but few have been rigorously tested. More research is needed to understand if employing a composite metric of indicators is advantageous and how each indicator might be scored and scaled.

Utility of ck metrics in predicting size of board-based software games

International Nuclear Information System (INIS)

Sabhat, N.; Azam, F.; Malik, A.A.

2017-01-01

Software size is one of the most important inputs of many software cost and effort estimation models. Early estimation of software plays an important role at the time of project inception. An accurate estimate of software size is, therefore, crucial for planning, managing, and controlling software development projects dealing with the development of software games. However, software size is unavailable during early phase of software development. This research determines the utility of CK (Chidamber and Kemerer) metrics, a well-known suite of object-oriented metrics, in estimating the size of software applications using the information from its UML (Unified Modeling Language) class diagram. This work focuses on a small subset dealing with board-based software games. Almost sixty games written using an object-oriented programming language are downloaded from open source repositories, analyzed and used to calibrate a regression-based size estimation model. Forward stepwise MLR (Multiple Linear Regression) is used for model fitting. The model thus obtained is assessed using a variety of accuracy measures such as MMRE (Mean Magnitude of Relative Error), Prediction of x(PRED(x)), MdMRE (Median of Relative Error) and validated using K-fold cross validation. The accuracy of this model is also compared with an existing model tailored for size estimation of board games. Based on a small subset of desktop games developed in various object-oriented languages, we obtained a model using CK metrics and forward stepwise multiple linear regression with reasonable estimation accuracy as indicated by the value of the coefficient of determination (R2 = 0.756).Comparison results indicate that the existing size estimation model outperforms the model derived using CK metrics in terms of accuracy of prediction. (author)

Metric solution of a spinning mass

International Nuclear Information System (INIS)

Sato, H.

1982-01-01

Studies on a particular class of asymptotically flat and stationary metric solutions called the Kerr-Tomimatsu-Sato class are reviewed about its derivation and properties. For a further study, an almost complete list of the papers worked on the Tomimatsu-Sato metrics is given. (Auth.)

Software architecture analysis tool : software architecture metrics collection

NARCIS (Netherlands)

Muskens, J.; Chaudron, M.R.V.; Westgeest, R.

2002-01-01

The Software Engineering discipline lacks the ability to evaluate software architectures. Here we describe a tool for software architecture analysis that is based on metrics. Metrics can be used to detect possible problems and bottlenecks in software architectures. Even though metrics do not give a

Generalized tolerance sensitivity and DEA metric sensitivity

OpenAIRE

Neralić, Luka; E. Wendell, Richard

2015-01-01

This paper considers the relationship between Tolerance sensitivity analysis in optimization and metric sensitivity analysis in Data Envelopment Analysis (DEA). Herein, we extend the results on the generalized Tolerance framework proposed by Wendell and Chen and show how this framework includes DEA metric sensitivity as a special case. Further, we note how recent results in Tolerance sensitivity suggest some possible extensions of the results in DEA metric sensitivity.