Nuclear criticality safety. Chapter 0530 of AEC manual

International Nuclear Information System (INIS)

2006-01-01

The programme objectives of this chapter of the U.S. Atomic Energy Commission manual on nuclear criticality safety are to protect the health and safety of the public and of the government and contractor personnel working in plants that handle fissionable material and to protect public and private property from the consequences of a criticality accident occurring in AEC-owned plants and other AEC-contracted activities involving fissionable materials

Health and Safety Procedures Manual for hazardous waste sites

Energy Technology Data Exchange (ETDEWEB)

Thate, J.E.

1992-09-01

The Oak Ridge National Laboratory Chemical Assessments Team (ORNL/CAT) has developed this Health and Safety Procedures Manual for the guidance, instruction, and protection of ORNL/CAT personnel expected to be involved in hazardous waste site assessments and remedial actions. This manual addresses general and site-specific concerns for protecting personnel, the general public, and the environment from any possible hazardous exposures. The components of this manual include: medical surveillance, guidance for determination and monitoring of hazards, personnel and training requirements, protective clothing and equipment requirements, procedures for controlling work functions, procedures for handling emergency response situations, decontamination procedures for personnel and equipment, associated legal requirements, and safe drilling practices.

Principles and Practices of Occupational Safety and Health: Student Manual: Booklet One.

Science.gov (United States)

Occupational Safety and Health Administration, Washington, DC.

The manual is the first of six student manuals for use in a course on occupational health and safety for supervisory personnel. The manual contains lessons 1-3 of the 15 consecutively-numbered lessons, each of which contains study questions (and answers) interwoven with the text and review questions at the end of each section. Lesson 1 (three…

Principles and Practices of Occupational Safety and Health: Student Manual: Booklet Five.

Science.gov (United States)

Occupational Safety and Health Administration, Washington, DC.

The manual is the fifth of six student manuals for use in a course on occupational health and safety for supervisory personnel. The manual contains lessons 14 and 15 of the 15 consecutively-numbered lessons, each of which contains study questions (and answers) interwoven with the text and review questions at the end of each section. Lesson 14…

Principles and Practices of Occupational Safety and Health: Administrator's Manual.

Science.gov (United States)

Occupational Safety and Health Administration, Washington, DC.

The manual guides an instructor in conducting a training course for first-line supervisors to familiarize them with six aspects relating to the Occupational Safety and Health Act of 1970: (1) requirements of the Act, (2) compliance with its standards, (3) identification of health and safety hazards, (4) correction of adverse conditions, (5) record…

Manual on quality assurance for computer software related to the safety of nuclear power plants

International Nuclear Information System (INIS)

1988-01-01

The objective of the Manual is to provide guidance in the assurance of quality of specification, design, maintenance and use of computer software related to items and activities important to safety (hereinafter referred to as safety related) in nuclear power plants. This guidance is consistent with, and supplements, the requirements and recommendations of Quality Assurance for Safety in Nuclear Power Plants: A Code of Practice, 50-C-QA, and related Safety Guides on quality assurance for nuclear power plants. Annex A identifies the IAEA documents referenced in the Manual. The Manual is intended to be of use to all those who, in any way, are involved with software for safety related applications for nuclear power plants, including auditors who may be called upon to audit management systems and product software. Figs

Occupational safety manual. 4. rev. ed.

International Nuclear Information System (INIS)

Skiba, R.

1979-01-01

With the rapid technical development and increasing life expectancy, protection against occupational hazards has become a central economic and social problem. Consultants and others responsible for occupational safety should not only be interested in their work but also have sufficient basic knowledge. The complex subject is presented in a simplified and easily comprehensible manner, with particular regard to the practical side. The book is at the same time a textbook for basic training and a reference manual for the working practice. (orig./HP) [de

Helicopter Operations and Personnel Safety (Helirescue Manual). Fourth Edition.

Science.gov (United States)

Dalle-Molle, John

The illustrated manual includes information on various aspects of helicopter rescue missions, including mission management roles for key personnel, safety rules around helicopters, requests for helicopter support, sample military air support forms, selection of landing zones, helicopter evacuations, rescuer delivery, passenger unloading, crash…

Federal Radiological Monitoring and Assessment Center Health and Safety Manual

Energy Technology Data Exchange (ETDEWEB)

FRMAC Health and Safety Working Group

2012-03-20

This manual is a tool to provide information to all responders and emergency planners and is suggested as a starting point for all organizations that provide personnel/assets for radiological emergency response. It defines the safety requirements for the protection of all emergency responders. The intent is to comply with appropriate regulations or provide an equal level of protection when the situation makes it necessary to deviate. In the event a situation arises which is not addressed in the manual, an appropriate management-level expert will define alternate requirements based on the specifics of the emergency situation. This manual is not intended to pertain to the general public.

Manual on maintenance of systems and components important to safety

International Nuclear Information System (INIS)

1986-01-01

The Manual should serve as guidance at the plant management level for the maintenance of systems and components important to safety. It includes a detailed description of management systems, administrative controls and procedures. The Annexes contain examples of documents and practices adopted by Operating Organizations of some Member States. It is not the intention of this Manual to address the technical problem of how to maintain a particular component but rather to cover the programmatic aspects of maintenance. It also contains some aspects of surveillance and verification activities. The Manual makes only general statements about radiation protection provisions in connection with maintenance; detailed guidance can be found in other IAEA documents

Highway Safety Manual applied in Missouri - freeway/software : research summary.

Science.gov (United States)

2016-03-01

AASHTOs Highway Safety Manual (HSM) : includes models for freeway segments, speedchange : lanes (transitional area between mainline : and ramps), ramps, and interchange terminals. : These predictive models for freeway : interchanges need to be cal...

A feasibility study for Arizona's roadway safety management process using the Highway Safety Manual and SafetyAnalyst : final report.

Science.gov (United States)

2016-07-01

To enable implementation of the American Association of State Highway Transportation (AASHTO) Highway Safety Manual using : SaftetyAnalyst (an AASHTOWare software product), the Arizona Department of Transportation (ADOT) studied the data assessment :...

Environment, safety and health progress assessment manual

International Nuclear Information System (INIS)

1992-12-01

On June 27, 1989, the Secretary of Energy announced a 10-Point Initiative to strengthen environment, safety, and health (ES ampersand H) programs, and waste management activities at DOE production, research, and testing facilities. One of the points involved conducting dent Tiger Team Assessments of DOE operating facilities. The Office of Special independent Projects (OSP), EH-5, in the Office of the Assistant Secretary for Environment, Safety and Health, EH-1, was assigned the responsibility to conduct the Tiger Team Assessments. Through June 1992, a total of 35 Tiger Team Assessments were completed. The Secretary directed that Corrective Action Plans be developed and implemented to address the concerns identified by the Tiger Teams. In March 1991, the Secretary approved a plan for assessments that are ''more focused, concentrating on ES ampersand H management, ES ampersand H corrective actions, self-assessment programs, and root-cause related issues.'' In July 1991, the Secretary approved the initiation of ES ampersand H Progress Assessments, as a followup to the Tiger Team Assessments, and in the continuing effort to institutionalize the self-assessment process and line management accountability in the ES ampersand H areas. This manual documents the processes to be used to perform the ES ampersand H Progress Assessments. It was developed based upon the lessons learned from Tiger Team Assessments, the two pilot Progress Assessments, and Progress Assessments that have been completed. The manual will be updated periodically to reflect lessons learned or changes in policy

Program desk manual for occupational safety and health -- U.S. Department of Energy Richland Operations, Office of Environment Safety and Health

International Nuclear Information System (INIS)

Musen, L.G.

1998-01-01

The format of this manual is designed to make this valuable information easily accessible to the user as well as enjoyable to read. Each chapter contains common information such as Purpose, Scope, Policy and References, as well as information unique to the topic at hand. This manual can also be provided on a CD or Hanford Internet. Major topics include: Organization and program for operational safety; Occupational medicine; Construction and demolition; Material handling and storage; Hoisting and rigging; Explosives; Chemical hazards; Gas cylinders; Electrical; Boiler and pressure vessels; Industrial fire protection; Industrial hygiene; and Safety inspection checklist

Program desk manual for occupational safety and health -- U.S. Department of Energy Richland Operations, Office of Environment Safety and Health

Energy Technology Data Exchange (ETDEWEB)

Musen, L.G.

1998-08-27

The format of this manual is designed to make this valuable information easily accessible to the user as well as enjoyable to read. Each chapter contains common information such as Purpose, Scope, Policy and References, as well as information unique to the topic at hand. This manual can also be provided on a CD or Hanford Internet. Major topics include: Organization and program for operational safety; Occupational medicine; Construction and demolition; Material handling and storage; Hoisting and rigging; Explosives; Chemical hazards; Gas cylinders; Electrical; Boiler and pressure vessels; Industrial fire protection; Industrial hygiene; and Safety inspection checklist.

Environment, safety and health progress assessment manual

International Nuclear Information System (INIS)

1992-12-01

On June 27, 1989, the Secretary of Energy announced a 1O-Point Initiative to strengthen environment,safety, and health (ES ampersand H) programs, and waste management activities at involved conducting DOE production, research, and testing facilities. One of the points independent Tiger Team Assessments of DOE operating facilities. The Office of Special Projects (OSP), EH-5, in the Office of the Assistant Secretary for Environment, Safety and Health, EH-1, was assigned the responsibility to conduct the Tiger Team Assessments. Through June 1992, a total of 35 Tiger Team Assessments were completed. The Secretary directed that Corrective Action Plans be developed and implemented to address the concerns identified by the Tiger Teams. In March 1991, the Secretary approved a plan for assessments that are ''more focused, concentrating on ES ampersand H management, ES ampersand H corrective actions, self-assessment programs, and root-cause related issues.'' In July 1991, the Secretary approved the initiation of ES ampersand H Progress Assessments, as a followup to the Tiger Team Assessments, and in the continuing effort to institutionalize the self-assessment process and line management accountability in the ES ampersand H areas. This volume contains appendices to the Environment, Safety and Health Progress Assessment Manual

Fire and blast safety manual for fuel element manufacture

International Nuclear Information System (INIS)

Ensinger, U.; Koehler, B.; Mester, W.; Riotte, H.G.; Sehrbrock, H.W.

1988-01-01

The manual aims to enable people involved in the planning, operation, supervision, licensing or appraisal of fuel element factories to make a quick and accurate assessment of blast safety. In Part A, technical plant principles are shown, and a summary lists the flammable materials and ignition sources to be found in fuel element factories, together with theoretical details of what happens during a fire or a blast. Part B comprises a list of possible fires and explosions in fuel element factories and ways of preventing them. Typical fire and explosion scenarios are analysed more closely on the basis of experiments. Part B also contains a list and an assessment of actual fires and explosions which have occurred in fuel element factories. Part C contains safety measures to protect against fire and explosion, in-built fire safety, fire safety in plant design, explosion protection and measures to protect people from radiation and other hazards when fighting fires. A distinction is drawn between UO 2 , MOX and HTR fuel elements. (orig./DG) [de

Unique safety manual for experimental personnel

International Nuclear Information System (INIS)

Busick, D.D.; Warren, G.J.

1979-01-01

Within a few months of the discovery of x-rays the first radiation injuries were reported (ta71). During the past thirty years both the number and complexity of x-ray analytical units have increased markedly. The world-wide number of incidents leading to severe injury has also increased. For analytical x-ray machines the need for engineered and administrative safeguards has long been recognized. At Stanford Synchrotron Radiation Laboratory (SSRL) the personnel protection system has been carefully designed to maximize safety and minimize experimental interference. However, all possible experimental configurations cannot be anticipated and some interference is to be expected. There are means by which safeguards can be substituted as long as these substitutions do not degrade the existing degree of safety. any substitutions must be evaluated by the Radiation Safety Committee, the SSRL staff and Operational Health Physics. Some studies have indicated that between fifty and ninety percent of serious radiation accidents are directly related to human errors, i.e., ignoring administrative proccedures, by-passing engineered safeguards or by inadequate training. Lindell has estimated the annual probability of serious injury to be about 1:100 per macchine. No matter what the real probability of serious injury is the personnel protection system should reduce this risk to a value that approaches zero. It is hoped that this manual will bring into sharper focus some of the more serious results of unnecessary risk taking. We also hope that it will convey the very real necessity for safeguards which may at times appear to be arbitrary and unnecessary impediments to experimental purposes

University building safety index measurement using risk and implementation matrix

Science.gov (United States)

Rahman, A.; Arumsari, F.; Maryani, A.

2018-04-01

Many high rise building constructed in several universities in Indonesia. The high-rise building management must provide the safety planning and proper safety equipment in each part of the building. Unfortunately, most of the university in Indonesia have not been applying safety policy yet and less awareness on treating safety facilities. Several fire accidents in university showed that some significant risk should be managed by the building management. This research developed a framework for measuring the high rise building safety index in university The framework is not only assessed the risk magnitude but also designed modular building safety checklist for measuring the safety implementation level. The safety checklist has been developed for 8 types of the university rooms, i.e.: office, classroom, 4 type of laboratories, canteen, and library. University building safety index determined using risk-implementation matrix by measuring the risk magnitude and assessing the safety implementation level. Building Safety Index measurement has been applied in 4 high rise buildings in ITS Campus. The building assessment showed that the rectorate building in secure condition and chemical department building in beware condition. While the library and administration center building was in less secure condition.

Vault Safety and Inventory System users manual, PRIME 2350. Revision 1

International Nuclear Information System (INIS)

Downey, N.J.

1994-01-01

This revision is issued to request review of the attached document: VSIS User Manual, PRIME 2350, which provides user information for the operation of the VSIS (Vault Safety and Inventory System). It describes operational aspects of Prime 2350 minicomputer and vault data acquisition equipment. It also describes the User's Main Menu and menu functions, including REPORTS. Also, system procedures for the Prime 2350 minicomputer are covered

Vault Safety and Inventory System users manual, PRIME 2350. Revision 1

Energy Technology Data Exchange (ETDEWEB)

Downey, N.J.

1994-12-14

This revision is issued to request review of the attached document: VSIS User Manual, PRIME 2350, which provides user information for the operation of the VSIS (Vault Safety and Inventory System). It describes operational aspects of Prime 2350 minicomputer and vault data acquisition equipment. It also describes the User`s Main Menu and menu functions, including REPORTS. Also, system procedures for the Prime 2350 minicomputer are covered.

Safety handling manual for high dose rate remote afterloading system

International Nuclear Information System (INIS)

1999-01-01

This manual is mainly for safety handling of 192 Ir-RALS (remote afterloading system) of high dose rate and followings were presented: Procedure and document format for the RALS therapy and for handling of its radiation source with the purpose of prevention of human errors and unexpected accidents, Procedure for preventing errors occurring in the treatment schedule and operation, and Procedure and format necessary for newly introducing the system into a facility. Consistency was intended in the description with the quality assurance guideline for therapy with small sealed radiation sources made by JASTRO (Japan Society for Therapeutic Radiology and Oncology). Use of the old type 60 Co-RALS was pointed out to be a serious problem remained and its safety handling procedure was also presented. (K.H.)

Manual on radiological safety in uranium and thorium mines and mills

International Nuclear Information System (INIS)

1976-01-01

The manual describes the personnel radiation hazards in uranium and thorium mines and mills. Measures which should be taken in order to protect the workers are outlined. The problems of air born radioactivity, external radiation, surface contamination and radioactive waste are treated. Safety standards in relation to the above mentioned subjects are given. An outline is given for monitoring programme. Monitoring methods, control methods and means of medical control are given

Manual on oil-gas industry waste utilization radioecological safety

International Nuclear Information System (INIS)

Kudryashev, V.A.; Lukashenko, S.N.; Tuleushev, A.Zh.; Marabaev, Zh.N.; Pasysaev, V.A.; Kayukov, P.G.; Kozhakhmetov, N.B.; Shevtsov, S.P.

2003-01-01

The development of a new document - 'Manual on radio-ecologically safe utilization of waste from oil-and-gas production' is carried out. This document regulates the whole cycle of environment protection measures at waste utilization for the named industry in Kazakhstan and is aimed on lowering the radiation risks and assurance of radioecological safety both at present and for the future. The document presents a set regulations necessary for radioactive wastes handling in the oil-gas industry. The normative document was agreed in both the Ministry of Health of the Republic of Kazakhstan (RK) and Ministry of Environment Protection of RK

Peace Corps Aquaculture Training Manual. Training Manual T0057.

Science.gov (United States)

Peace Corps, Washington, DC. Information Collection and Exchange Div.

This Peace Corps training manual was developed from two existing manuals to provide a comprehensive training program in fish production for Peace Corps volunteers. The manual encompasses the essential elements of the University of Oklahoma program that has been training volunteers in aquaculture for 25 years. The 22 chapters of the manual are…

The Effectiveness and Safety of Manual Therapy on Pain and Disability in Older Persons With Chronic Low Back Pain: A Systematic Review.

Science.gov (United States)

de Luca, Katie E; Fang, Sheng Hung; Ong, Justin; Shin, Ki-Soo; Woods, Samuel; Tuchin, Peter J

2017-09-01

The aim of this study was to perform a systematic review of the literature of the effectiveness and safety of manual therapy interventions on pain and disability in older persons with chronic low back pain (LBP). A literature search of 4 electronic databases was performed (PubMed, EMBASE, OVID, and CINAHL). Inclusion criteria included randomized controlled trials of manual therapy interventions on older persons who had chronic LBP. Effectiveness was determined by extracting and examining outcomes for pain and disability, with safety determined by the report of adverse events. The PEDro scale was used for quality assessment of eligible studies. The search identified 405 articles, and 38 full-text articles were assessed. Four studies met the inclusion criteria. All trials were of good methodologic quality and had a low risk of bias. The included studies provided moderate evidence supporting the use of manual therapy to reduce pain levels and alleviate disability. A limited number of studies have investigated the effectiveness and safety of manual therapy in the management of older people with chronic LBP. The current evidence to make firm clinical recommendations is limited. Research with appropriately designed trials to investigate the effectiveness and safety of manual therapy interventions in older persons with chronic LBP is required. Copyright © 2017. Published by Elsevier Inc.

MORT User's Manual for use with the Management Oversight and Risk Tree analytical logic diagram. [Contains a list of System Safety Development Center publications

Energy Technology Data Exchange (ETDEWEB)

Knox, N.W.; Eicher, R.W.

1992-02-01

This report contains the User's Manual for MORT (Management Oversight and Risk Tree), a logic diagram in the form of a work sheet'' that illustrates a long series of interrelated questions. MORT is a comprehensive analytical procedure that provides a disciplined method for determining the causes and contributing factors of major accidents. Alternatively, it serves as a tool to evaluate the quality of an existing system. While similar in many respects to fault tree analysis, MORT is more generalized and presents over 1,500 specific elements of an ideal universal'' management program for optimizing environment, safety and health, and other programs. This User's Manual is intended to be used with the MORT diagram dated February 1992.

Biosafety Manual

Energy Technology Data Exchange (ETDEWEB)

King, Bruce W.

2010-05-18

Work with or potential exposure to biological materials in the course of performing research or other work activities at Lawrence Berkeley National Laboratory (LBNL) must be conducted in a safe, ethical, environmentally sound, and compliant manner. Work must be conducted in accordance with established biosafety standards, the principles and functions of Integrated Safety Management (ISM), this Biosafety Manual, Chapter 26 (Biosafety) of the Health and Safety Manual (PUB-3000), and applicable standards and LBNL policies. The purpose of the Biosafety Program is to protect workers, the public, agriculture, and the environment from exposure to biological agents or materials that may cause disease or other detrimental effects in humans, animals, or plants. This manual provides workers; line management; Environment, Health, and Safety (EH&S) Division staff; Institutional Biosafety Committee (IBC) members; and others with a comprehensive overview of biosafety principles, requirements from biosafety standards, and measures needed to control biological risks in work activities and facilities at LBNL.

A proposed power assisted system of manual wheelchair based on universal design for eldery

Science.gov (United States)

Susmartini, Susy; Pryadhitama, Ilham; Herdiman, Lobes; Wahyufitriani, Cindy

2017-11-01

Difficulties in walking is high percentage case in the limitations mobility of the elderly. An assisted technology commonly used to help the elderly who have walking difficulty is a manual wheelchair. However, the elderly frequently experiences difficulties in operating manual wheelchair due to gradually degradation of their physical condition. Preliminary study results showed that the average grip strength of the hands of seven elderly subjects was 13.8 ± 6.96 kg and the value is relatively weak. In addition, the mean maximum speed of 7 elderly subjects when doing to round the wheelchair is 0.6 ± 0.2m / s. This value is only 56.4% compared with an average speed of 20-23-year age group (8 males), which is 1.1 ± 0.1 m / s. This shows that the elderly who have walking difficulty have low grip strength and speed in operating a wheelchair. On the other hand, manual wheelchairs suffer an inadequate technology solution to solve the problem. Therefore, an assistive technology is proposed to create mobility aid to accommodate the elderly needs. One approach used is Universal Design. This paper proposes a system of intervention in the manual wheelchair through the 7 principles of Universal Design approach. The preliminary principle has not been able to accommodate the needs of the elderly will become a reference in the proposed design of this study.

University Safety Culture: A Work-in-Progress?

Science.gov (United States)

Lyons, Michael

2016-01-01

Safety management systems in Australian higher education organisations are under-researched. Limited workplace safety information can be found in the various reports on university human resources benchmarking programs, and typically they show only descriptive statistics. With the commencement of new consultation-focused regulations applying to…

A university contribution to reactor safety

International Nuclear Information System (INIS)

Hall, W.B.

1980-01-01

The total UK university effort available for research specifically directed towards reactor safety is certainly small in comparison with that in industry. To be worth while, the work should complement that in the industry, and ways in which this can, and in some cases does, happen, will be discussed. There is, however, another reason for university involvement: the need for an informed body of opinion on matters of reactor safety outside the industry. Without this it is difficult for the public and its representatives to assure themselves that the depth and scope of safety analysis is commensurate with the seriousness of the problem, and that the best available data and techniques are being used. An independent inspectorate is an essential element in this philosophy, but in addition there is much to be said for exposing the arguments to scrutiny by the widest possible range of informed critics. Such people will be much more effective if they are themselves involved in real problems in the field. In a university, this involvement is probably best achieved through research; as mentioned above, the type of research should preferably complement that being carried out in the industry. The current situation, and the future, are discussed. (author)

School Survey on Crime and Safety (SSOCS) 2000 Public-Use Data Files, User's Manual, and Detailed Data Documentation. [CD-ROM].

Science.gov (United States)

National Center for Education Statistics (ED), Washington, DC.

This CD-ROM contains the raw, public-use data from the 2000 School Survey on Crime and Safety (SSOCS) along with a User's Manual and Detailed Data Documentation. The data are provided in SAS, SPSS, STATA, and ASCII formats. The User's Manual and the Detailed Data Documentation are provided as .pdf files. (Author)

PC based manual and safety logic card test setup for 235 MWe PHWRs

International Nuclear Information System (INIS)

Chandgadkar, G.M.; Kohli, A.K.; Agarwal, R.G.; Chandra, Rajesh

1992-01-01

Fuel handling controls for 235 MWe PHWR make use of Manual and Logic cards (MLCs) for providing safety interlocks. These cards consist of various type of logic blocks. By connecting these logic blocks all the safety interlocks required for fuel handling controls have been provided. Previously trouble shooting of these cards was done by means of logic probe. Since the method was manual, it was laborious and time consuming. PC based test setup has overcome this drawback and detects the fault at the component level within few seconds. It also gives printout of status of faulty MLC cards. Here motherboard has been designed having slots for insertion of MLC cards. The input/output connection of these cards are coming to two 50 pin FRC connectors. PC communicates through 144 line digital input/output card with MLC card under test. Software is user friendly and outputs suitable input patterns to the card under test and checks for output pattern. It compares this output pattern with compare pattern and detects the fault and displays the symptoms. This system is currently in use at test facility for fuelling machine for 235 MWe PHWR reactor at Refuelling Technology Division, Hall-7. This test setup has been proposed for use at NAPP and future reactors. (author). 4 figs., 1 annexure

Manual on safety aspects of the design and equipment of hot laboratories. 1981 ed

International Nuclear Information System (INIS)

1981-01-01

This manual covers the general principles of planning and design of areas inside laboratories according to the varying potential radiation and contamination hazards; enclosures for radioactive material containment; viewing and lighting systems and various types of manipulators; transfer and transport of radioactive materials within the laboratories; air cleaning and ventilation systems, with particular reference to IAEA Safety Series No.17; techniques for controlling air pollution from the operation of nuclear facilities; various radioactive waste disposal systems; criticality control; fire protection; personnel monitoring, including changing-room monitoring and protective clothing; standardization and automation; and administrative controls. Although alpha, beta, gamma technologies have developed separately, equipment used in radioactive work is common to many operations. There is a step change in technology between work with uranium and plutonium and between work with plutonium and other transuranics; with plutonium one enters the field of alpha, beta, gamma technology. This manual reports the basic requirements and gives reference to more sophisticated techniques available. It is not concerned with work on a commercial scale. Other publications of interest in this context, for instance IAEA Safety Series No.39, are referenced for more detailed information.

Radiological Safety Analysis Computer (RSAC) Program Version 7.0 Users’ Manual

Energy Technology Data Exchange (ETDEWEB)

Dr. Bradley J Schrader

2009-03-01

The Radiological Safety Analysis Computer (RSAC) Program Version 7.0 (RSAC-7) is the newest version of the RSAC legacy code. It calculates the consequences of a release of radionuclides to the atmosphere. A user can generate a fission product inventory from either reactor operating history or a nuclear criticality event. RSAC-7 models the effects of high-efficiency particulate air filters or other cleanup systems and calculates the decay and ingrowth during transport through processes, facilities, and the environment. Doses are calculated for inhalation, air immersion, ground surface, ingestion, and cloud gamma pathways. RSAC-7 can be used as a tool to evaluate accident conditions in emergency response scenarios, radiological sabotage events and to evaluate safety basis accident consequences. This users’ manual contains the mathematical models and operating instructions for RSAC-7. Instructions, screens, and examples are provided to guide the user through the functions provided by RSAC-7. This program was designed for users who are familiar with radiological dose assessment methods.

Radiological Safety Analysis Computer (RSAC) Program Version 7.2 Users’ Manual

Energy Technology Data Exchange (ETDEWEB)

Dr. Bradley J Schrader

2010-10-01

The Radiological Safety Analysis Computer (RSAC) Program Version 7.2 (RSAC-7) is the newest version of the RSAC legacy code. It calculates the consequences of a release of radionuclides to the atmosphere. A user can generate a fission product inventory from either reactor operating history or a nuclear criticality event. RSAC-7 models the effects of high-efficiency particulate air filters or other cleanup systems and calculates the decay and ingrowth during transport through processes, facilities, and the environment. Doses are calculated for inhalation, air immersion, ground surface, ingestion, and cloud gamma pathways. RSAC-7 can be used as a tool to evaluate accident conditions in emergency response scenarios, radiological sabotage events and to evaluate safety basis accident consequences. This users’ manual contains the mathematical models and operating instructions for RSAC-7. Instructions, screens, and examples are provided to guide the user through the functions provided by RSAC-7. This program was designed for users who are familiar with radiological dose assessment methods.

Radiological Safety Analysis Computer (RSAC) Program Version 7.0 Users Manual

International Nuclear Information System (INIS)

Schrader, Bradley J.

2009-01-01

The Radiological Safety Analysis Computer (RSAC) Program Version 7.0 (RSAC-7) is the newest version of the RSAC legacy code. It calculates the consequences of a release of radionuclides to the atmosphere. A user can generate a fission product inventory from either reactor operating history or a nuclear criticality event. RSAC-7 models the effects of high-efficiency particulate air filters or other cleanup systems and calculates the decay and ingrowth during transport through processes, facilities, and the environment. Doses are calculated for inhalation, air immersion, ground surface, ingestion, and cloud gamma pathways. RSAC-7 can be used as a tool to evaluate accident conditions in emergency response scenarios, radiological sabotage events and to evaluate safety basis accident consequences. This users manual contains the mathematical models and operating instructions for RSAC-7. Instructions, screens, and examples are provided to guide the user through the functions provided by RSAC-7. This program was designed for users who are familiar with radiological dose assessment methods

Towards a radiation safety culture at Universidad Nacional de Colombia

International Nuclear Information System (INIS)

Poveda, Jairo F.; Munera, Hector A.

2008-01-01

Full text: During the 20th century, nuclear and radiation techniques for research, teaching, and medical and engineering practice slowly appeared at the National University of Colombia, mainly at the Bogota, Medellin and Manizales branches. Each individual laboratory or researcher obtained the license for the use of the radioactive source, or radiation emitting apparatus. However, the University as a whole does not have as yet a Radiation Safety Manual, nor an inventory of laboratories using radiation. From the viewpoint of radiation safety and culture, this situation is undesirable, and may easily lead to inappropriate waste management practices, including the possibility of orphan sources (one such source has been already found). As part of the program of environmental management of dangerous wastes promoted by the National Division of Laboratories of our University, an office of radiation safety was created in the year 2006. This paper describes the situation that was found, the activities that have been carried out, some of the difficulties that we have met, and the plans that we have to help shape a safety culture at our institution. Currently we are pursuing an inventory of laboratories using radioactive sources and radiation emitting apparatuses, starting with the branches in Bogota and Manizales which are perceived as the most urgent to deal with. Fortunately, the branch in Medellin has been for about a decade under the care of a former radiation safety officer of our national Institute of Nuclear Affairs, who presently teaches there. During 2006 and 2007, 13 laboratories using radioactive sources were visited in the Bogota branch. Safety procedures and waste handling protocols were checked, safety manuals prepared and/or revised, and recommendations for safety culture provided. During 2008 we will visit Manizales, and will continue visiting a number of X-ray machines used in the Bogota branch for engineering, veterinary, and diagnostic, and surgery medical

[Current state of measures to deal with natural disasters at public universities].

Science.gov (United States)

Hirouchi, Tomoko; Tanka, Mamoru; Shimada, Ikuko; Yoshimoto, Yoshinobu; Sato, Atsushi

2012-03-01

The responsibility of a university after a large-scale, natural disaster is to secure the safety of students' and local residents' lives. The present study investigated the current state of measures at public universities to deal with natural disasters in coordination with the local community. A survey was administered at 77 public universities in Japan from March 25 to May 10, 2011. The survey included questions on the existence of local disaster evacuation sites, a disaster manual, disaster equipment storage, emergency drinking water, and food storage. A total of 51% of universities had designated local evacuation sites. Based on responses for the remaining questions, universities with and without the designated disaster response solutions accounted for 42% and 57%, respectively, for disaster manuals; 55% and 33%, respectively, for disaster equipment; 32% and 13%, respectively, for disaster drinking water storage; and 26% and 7%, respectively, for emergency food storage. A majority of public universities have not created disaster manuals, regardless of whether they have a local evacuation site. The survey results also indicated that most universities have no storage of disaster equipment or emergency supplies.

EXPERIENCE NETWORKING UNIVERSITY OF EDUCATION TRAINING MASTERS SAFETY OF LIFE

Directory of Open Access Journals (Sweden)

Elvira Mikhailovna Rebko

2016-02-01

Full Text Available The article discloses experience networking of universities (Herzen State Pedagogical University and Sakhalin State University in the development and implementation of joint training programs for master’s education in the field of life safety «Social security in the urban environment». The novelty of the work is to create a schematic design of basic educational training program for master’s education in the mode of networking, and to identify effective instructional techniques and conditions of networking.Purpose – present the results of the joint development of a network of the basic educational program (BEP, to identify the stages of networking, to design a generalized scheme of development and implementation of a network of educational training program for master’s education in the field of life safety.Results generalized model of networking partner institutions to develop and implement the basic educational program master.Practical implications: the education process for Master of Education in the field of health and safety in Herzen State Pedagogical University and Sakhalin State University.

Evaluation of fire safety measures at local universities in Kenya with ...

African Journals Online (AJOL)

This study establishes fire safety measures in place in local universities in Kenya, and ... fire suppression systems, fire detection and alarm systems and fire Hydrants. ... response backed by university management endorsement and support. The Directorate of occupational safety and health services should also make the ...

Propensity scores-potential outcomes framework to incorporate severity probabilities in the highway safety manual crash prediction algorithm.

Science.gov (United States)

Sasidharan, Lekshmi; Donnell, Eric T

2014-10-01

Accurate estimation of the expected number of crashes at different severity levels for entities with and without countermeasures plays a vital role in selecting countermeasures in the framework of the safety management process. The current practice is to use the American Association of State Highway and Transportation Officials' Highway Safety Manual crash prediction algorithms, which combine safety performance functions and crash modification factors, to estimate the effects of safety countermeasures on different highway and street facility types. Many of these crash prediction algorithms are based solely on crash frequency, or assume that severity outcomes are unchanged when planning for, or implementing, safety countermeasures. Failing to account for the uncertainty associated with crash severity outcomes, and assuming crash severity distributions remain unchanged in safety performance evaluations, limits the utility of the Highway Safety Manual crash prediction algorithms in assessing the effect of safety countermeasures on crash severity. This study demonstrates the application of a propensity scores-potential outcomes framework to estimate the probability distribution for the occurrence of different crash severity levels by accounting for the uncertainties associated with them. The probability of fatal and severe injury crash occurrence at lighted and unlighted intersections is estimated in this paper using data from Minnesota. The results show that the expected probability of occurrence of fatal and severe injury crashes at a lighted intersection was 1 in 35 crashes and the estimated risk ratio indicates that the respective probabilities at an unlighted intersection was 1.14 times higher compared to lighted intersections. The results from the potential outcomes-propensity scores framework are compared to results obtained from traditional binary logit models, without application of propensity scores matching. Traditional binary logit analysis suggests that

New highway accident location manual for Missouri.

Science.gov (United States)

2013-12-01

The Missouri HAL manual is used to identify, analyze, and correct high crash locations, and has not been updated since : 1999. This new edition brings the manual up to date, while incorporating the methodology of the national Highway Safety : Manual ...

Safety climate in university and college laboratories: impact of organizational and individual factors.

Science.gov (United States)

Wu, Tsung-Chih; Liu, Chi-Wei; Lu, Mu-Chen

2007-01-01

Universities and colleges serve to be institutions of education excellence; however, problems in the areas of occupational safety may undermine such goals. Occupational safety must be the concern of every employee in the organization, regardless of job position. Safety climate surveys have been suggested as important tools for measuring the effectiveness and improvement direction of safety programs. Thus, this study aims to investigate the influence of organizational and individual factors on safety climate in university and college laboratories. Employees at 100 universities and colleges in Taiwan were mailed a self-administered questionnaire survey; the response rate was 78%. Multivariate analysis of variance revealed that organizational category of ownership, the presence of a safety manager and safety committee, gender, age, title, accident experience, and safety training significantly affected the climate. Among them, accident experience and safety training affected the climate with practical significance. The authors recommend that managers should address important factors affecting safety issues and then create a positive climate by enforcing continuous improvements.

Cleaning capacity promoted by motor-driven or manual instrumentation using ProTaper Universal system: Histological analysis

OpenAIRE

da Frota, Matheus Franco; Filho, Idomeo Bonetti; Berbert, F?bio Luiz Camargo Villela; Sponchiado, Emilio Carlos; Marques, Andr? Augusto Franco; Garcia, Lucas da Fonseca Roberti

2013-01-01

Aim: The aim of this study was to assess the cleaning capacity of the Protaper system using motor-driven or manual instrumentation. Materials and Methods: Ten mandibular molars were randomly separated into 2 groups (n = 5) according to the type of instrumentation performed, as follows: Group 1 - instrumentation with rotary nickel-titanium (Ni-Ti) files using ProTaper Universal System (Dentsply/Maillefer); and, Group 2 - instrumentation with Ni-Ti hand files using ProTaper Universal (Den...

Cleaning capacity promoted by motor-driven or manual instrumentation using ProTaper Universal system: Histological analysis.

Science.gov (United States)

da Frota, Matheus Franco; Filho, Idomeo Bonetti; Berbert, Fábio Luiz Camargo Villela; Sponchiado, Emilio Carlos; Marques, André Augusto Franco; Garcia, Lucas da Fonseca Roberti

2013-01-01

The aim of this study was to assess the cleaning capacity of the Protaper system using motor-driven or manual instrumentation. Ten mandibular molars were randomly separated into 2 groups (n = 5) according to the type of instrumentation performed, as follows: Group 1 - instrumentation with rotary nickel-titanium (Ni-Ti) files using ProTaper Universal System (Dentsply/Maillefer); and, Group 2 - instrumentation with Ni-Ti hand files using ProTaper Universal (Dentsply-Maillefer). Afterwards, the teeth were sectioned transversely and submitted to histotechnical processing to obtain histological sections for microscopic evaluation. The images were analyzed by the Corel Photo-Paint X5 program (Corel Corporation) using an integration grid superimposed on the image. Statistical analysis (U-Mann-Whitney - P < 0.05) demonstrated that G1 presented higher cleaning capacity when compared to G2. The rotary technique presented better cleaning results in the apical third of the root canal system when compared to the manual technique.

Safety leadership in the teaching laboratories of electrical and electronic engineering departments at Taiwanese Universities.

Science.gov (United States)

Wu, Tsung-Chih

2008-01-01

Safety has always been one of the principal goals in teaching laboratories. Laboratories cannot serve their educational purpose when accidents occur. The leadership of department heads has a major impact on laboratory safety, so this study discusses the factors affecting safety leadership in teaching laboratories. This study uses a mail survey to explore the perceived safety leadership in electrical and electronic engineering departments at Taiwanese universities. An exploratory factor analysis shows that there are three main components of safety leadership, as measured on a safety leadership scale: safety controlling, safety coaching, and safety caring. The descriptive statistics also reveals that among faculty, the perception of department heads' safety leadership is in general positive. A two-way MANOVA shows that there are interaction effects on safety leadership between university size and instructor age; there are also interaction effects between presence of a safety committee and faculty gender and faculty age. It is therefore necessary to assess organizational factors when determining whether individual factors are the cause of differing perceptions among faculty members. The author also presents advice on improving safety leadership for department heads at small universities and at universities without safety committees.

Manual therapy in the treatment of patients with hemophilia B and inhibitor.

Science.gov (United States)

Cuesta-Barriuso, Rubén; Trelles-Martínez, Roberto O

2018-01-22

The main clinical manifestations of hemophilia are muscle and joint bleeding. Recurrent bleeding leads to a degenerative process known as hemophilic arthropathy. The development of inhibitors (antibodies against FVIII/FIX concentrates) is the main complication in the treatment of hemophilia. The objective was to assess the safety and efficacy of manual therapy treatment in a patient with hemophilia and inhibitor. A 26-year-old patient with hemophilia B and inhibitor received physiotherapy treatment based on manual therapy for 3 months, with a frequency of 2 sessions per week. The joint status was evaluated using the Hemophilia Joint Health Score; pain was assessed with the Visual Analog Scale; and the range of movement was evaluated using a universal goniometer. The patient developed no joint bleeding in the knees or ankles as a result of the physiotherapy treatment. Following treatment, improvements were noted in the range of movement of knees and ankles, the perception of pain in both knees, and ankle functionality. Until now, manual therapy using joint traction was contraindicated in patients with hemophilia and inhibitor, as it was feared to cause possible joint bleeding. This is the first case study to address the safety and efficacy of manual therapy in a patient with hemophilia and an inhibitor. The results of this study may help to establish which manual therapy treatments are indicated in patients with hemophilic arthropathy and inhibitors. Thus, a physiotherapy program based on manual therapy may be safe in patients with hemophilia and inhibitor and such therapy may improve joint condition, pain, and joint range of motion in patients with hemophilia and inhibitor. Randomized clinical trials are needed to confirm the results of this case study.

Operating manual for the Bulk Shielding Reactor

International Nuclear Information System (INIS)

1983-04-01

The BSR is a pool-type reactor. It has the capabilities of continuous operation at a power level of 2 MW or at any desired lower power level. This manual presents descriptive and operational information. The reactor and its auxillary facilities are described from physical and operational viewpoints. Detailed operating procedures are included which are applicable from source-level startup to full-power operation. Also included are procedures relative to the safety of personnel and equipment in the areas of experiments, radiation and contamination control, emergency actions, and general safety. This manual supercedes all previous operating manuals for the BSR

Operating manual for the Bulk Shielding Reactor

International Nuclear Information System (INIS)

1987-03-01

The BSR is a pool-type reactor. It has the capabilities of continuous operation at a power level of 2 MW or at any desired lower power level. This manual presents descriptive and operational information. The reactor and its auxiliary facilities are described from physical and operational viewpoints. Detailed operating procedures are included which are applicable from source-level startup to full-power operation. Also included are procedures relative to the safety of personnel and equipment in the areas of experiments, radiation and contamination control, emergency actions, and general safety. This manual supersedes all previous operating manuals for the BSR

Operating manual for the Bulk Shielding Reactor

Energy Technology Data Exchange (ETDEWEB)

1987-03-01

The BSR is a pool-type reactor. It has the capabilities of continuous operation at a power level of 2 MW or at any desired lower power level. This manual presents descriptive and operational information. The reactor and its auxiliary facilities are described from physical and operational viewpoints. Detailed operating procedures are included which are applicable from source-level startup to full-power operation. Also included are procedures relative to the safety of personnel and equipment in the areas of experiments, radiation and contamination control, emergency actions, and general safety. This manual supersedes all previous operating manuals for the BSR.

Operating manual for the Bulk Shielding Reactor

Energy Technology Data Exchange (ETDEWEB)

1983-04-01

The BSR is a pool-type reactor. It has the capabilities of continuous operation at a power level of 2 MW or at any desired lower power level. This manual presents descriptive and operational information. The reactor and its auxillary facilities are described from physical and operational viewpoints. Detailed operating procedures are included which are applicable from source-level startup to full-power operation. Also included are procedures relative to the safety of personnel and equipment in the areas of experiments, radiation and contamination control, emergency actions, and general safety. This manual supercedes all previous operating manuals for the BSR.

Fire Protection Program Manual

Energy Technology Data Exchange (ETDEWEB)

Sharry, J A

2012-05-18

This manual documents the Lawrence Livermore National Laboratory (LLNL) Fire Protection Program. Department of Energy (DOE) Orders 420.1B, Facility Safety, requires LLNL to have a comprehensive and effective fire protection program that protects LLNL personnel and property, the public and the environment. The manual provides LLNL and its facilities with general information and guidance for meeting DOE 420.1B requirements. The recommended readers for this manual are: fire protection officers, fire protection engineers, fire fighters, facility managers, directorage assurance managers, facility coordinators, and ES and H team members.

chemical safety in laboratories of african universities

African Journals Online (AJOL)

unesco

Universities in Africa are in need of chemical safety and security facilities, ... In March 2009, fifty one 4th year undergraduate students (graduating class) of .... manufacturing industries, and many of them are concerned primarily ... advancement of chemistry world wide to do their best both to push the African chemistry.

The Radiological Safety Analysis Computer Program (RSAC-5) user's manual

International Nuclear Information System (INIS)

Wenzel, D.R.

1994-02-01

The Radiological Safety Analysis Computer Program (RSAC-5) calculates the consequences of the release of radionuclides to the atmosphere. Using a personal computer, a user can generate a fission product inventory from either reactor operating history or nuclear criticalities. RSAC-5 models the effects of high-efficiency particulate air filters or other cleanup systems and calculates decay and ingrowth during transport through processes, facilities, and the environment. Doses are calculated through the inhalation, immersion, ground surface, and ingestion pathways. RSAC+, a menu-driven companion program to RSAC-5, assists users in creating and running RSAC-5 input files. This user's manual contains the mathematical models and operating instructions for RSAC-5 and RSAC+. Instructions, screens, and examples are provided to guide the user through the functions provided by RSAC-5 and RSAC+. These programs are designed for users who are familiar with radiological dose assessment methods

Radiological control manual. Revision 1

Energy Technology Data Exchange (ETDEWEB)

Kloepping, R.

1996-05-01

This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPP and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP.

Radiological control manual. Revision 1

International Nuclear Information System (INIS)

Kloepping, R.

1996-05-01

This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPP and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP

Oil Spill Response Manual

NARCIS (Netherlands)

Marieke Zeinstra; Sandra Heins; Wierd Koops

2014-01-01

A two year programme has been carried out by the NHL University of Applied Sciences together with private companies in the field of oil and chemical spill response to finalize these manuals on oil and chemical spill response. These manuals give a good overview of all aspects of oil and chemical

Fuel Element Technical Manual

Energy Technology Data Exchange (ETDEWEB)

Burley, H.H. [ed.

1956-08-01

It is the purpose of the Fuel Element Technical Manual to Provide a single document describing the fabrication processes used in the manufacture of the fuel element as well as the technical bases for these processes. The manual will be instrumental in the indoctrination of personnel new to the field and will provide a single data reference for all personnel involved in the design or manufacture of the fuel element. The material contained in this manual was assembled by members of the Engineering Department and the Manufacturing Department at the Hanford Atomic Products Operation between the dates October, 1955 and June, 1956. Arrangement of the manual. The manual is divided into six parts: Part I--introduction; Part II--technical bases; Part III--process; Part IV--plant and equipment; Part V--process control and improvement; and VI--safety.

Accident Prevention: A Workers' Education Manual.

Science.gov (United States)

International Labour Office, Geneva (Switzerland).

Devoted to providing industrial workers with a greater knowledge of precautionary measures undertaken and enforced by industries for the protection of workers, this safety education manual contains 14 lessons ranging from "The Problems of Accidents during Work" to "Trade Unions and Workers and Industrial Safety." Fire protection, safety equipment…

Education of radiation safety specialists at Faculty of Medicine of Vilnius University

International Nuclear Information System (INIS)

Urbelis, A.; Surkiene, G.

2004-01-01

Vilnius University is the first institution of higher education in Lithuania that began to teach students on radiation safety. The special course of radiation hygiene was delivered to students in 1962-1992. In 1992 it was introduced residency of radiation hygiene and graduated students qualified for title of radiation hygiene specialist. The residency lasted one year and included six cycles: fundamentals of nuclear physics, statistics and noninfectious epidemiology, radiobiology, radiological research methods, controls of radiation safety and hygienic analysis of radiation safety. From 1994 Vilnius University has been educating and training professionals of public health. The specialists of radiation safety aren't been training as isolated branch. All courses is divided into two parts. The first one is included into bachelor, the second part - into master study. The bachelor study consists of 2 credits (16 hours for lectures and 32 hours for practical studies). The future bachelors study introduction of radiation safety, elements of nuclear physics, dose limit values, fundamentals of radiological protection, natural radiation. The master study consists of 2 credits (8 hours for lectures and 48 hours for practical studies). The future masters study specific problems of radiation safety in medicine and industry, the safety problems of nuclear power - stations, the problems of radioactive wastes, radiation biology, radiation risk. Radiation safety study model in Faculty of medicine of Vilnius University differs from study model in most European countries as it makes great play of radiation safety while usual model includes radiation safety as insignificant part of environmental health. (author)

National Ignition Facility Project Site Safety Program

International Nuclear Information System (INIS)

Dun, C

2003-01-01

This Safety Program for the National Ignition Facility (NIF) presents safety protocols and requirements that management and workers shall follow to assure a safe and healthful work environment during activities performed on the NIF Project site. The NIF Project Site Safety Program (NPSSP) requires that activities at the NIF Project site be performed in accordance with the ''LLNL ES and H Manual'' and the augmented set of controls and processes described in this NIF Project Site Safety Program. Specifically, this document: (1) Defines the fundamental NIF site safety philosophy. (2) Defines the areas covered by this safety program (see Appendix B). (3) Identifies management roles and responsibilities. (4) Defines core safety management processes. (5) Identifies NIF site-specific safety requirements. This NPSSP sets forth the responsibilities, requirements, rules, policies, and regulations for workers involved in work activities performed on the NIF Project site. Workers are required to implement measures to create a universal awareness that promotes safe practice at the work site and will achieve NIF management objectives in preventing accidents and illnesses. ES and H requirements are consistent with the ''LLNL ES and H Manual''. This NPSSP and implementing procedures (e.g., Management Walkabout, special work procedures, etc.,) are a comprehensive safety program that applies to NIF workers on the NIF Project site. The NIF Project site includes the B581/B681 site and support areas shown in Appendix B

Is Our Safety and Security Guaranteed on University of Cape Coast Campus? Undergraduates Students' Perceptions

Science.gov (United States)

Owusu, G. A.; Akoto, J. S.; Abnory, M. M.

2016-01-01

In higher education like other institutions, safety and security of persons particularly students resident on university campuses remain topical. The limited research conducted on the experiences of university students in Ghana reflects paucity of literature on safety and security on university campuses in Ghana where such issues have been…

TA-55 change control manual

International Nuclear Information System (INIS)

Blum, T.W.; Selvage, R.D.; Courtney, K.H.

1997-11-01

This manual is the guide for initiating change at the Plutonium Facility, which handles the processing of plutonium as well as research on plutonium metallurgy. It describes the change and work control processes employed at TA-55 to ensure that all proposed changes are properly identified, reviewed, approved, implemented, tested, and documented so that operations are maintained within the approved safety envelope. All Laboratory groups, their contractors, and subcontractors doing work at TA-55 follow requirements set forth herein. This manual applies to all new and modified processes and experiments inside the TA-55 Plutonium Facility; general plant project (GPP) and line item funded construction projects at TA-55; temporary and permanent changes that directly or indirectly affect structures, systems, or components (SSCs) as described in the safety analysis, including Facility Control System (FCS) software; and major modifications to procedures. This manual does not apply to maintenance performed on process equipment or facility SSCs or the replacement of SSCs or equipment with documented approved equivalents

EXPERIENCE NETWORKING UNIVERSITY OF EDUCATION TRAINING MASTERS SAFETY OF LIFE

OpenAIRE

Elvira Mikhailovna Rebko

2016-01-01

The article discloses experience networking of universities (Herzen State Pedagogical University and Sakhalin State University) in the development and implementation of joint training programs for master’s education in the field of life safety «Social security in the urban environment». The novelty of the work is to create a schematic design of basic educational training program for master’s education in the mode of networking, and to identify effective instructional techniques and conditions...

Manual for Cyclic Triaxial Test

DEFF Research Database (Denmark)

Shajarati, Amir; Sørensen, Kris Wessel; Nielsen, Søren Kjær

This manual describes the different steps that is included in the procedure for conducting a cyclic triaxial test at the geotechnical Laboratory at Aalborg University. Furthermore it contains a chapter concerning some of the background theory for the static triaxial tests. The cyclic/dynamic tria......This manual describes the different steps that is included in the procedure for conducting a cyclic triaxial test at the geotechnical Laboratory at Aalborg University. Furthermore it contains a chapter concerning some of the background theory for the static triaxial tests. The cyclic...

Speaking up behaviors and safety climate in an Austrian university hospital.

Science.gov (United States)

Schwappach, David; Sendlhofer, Gerald; Häsler, Lynn; Gombotz, Veronika; Leitgeb, Karina; Hoffmann, Magdalena; Jantscher, Lydia; Brunner, Gernot

2018-04-26

To analyze speaking up behavior and safety climate with a validated questionnaire for the first time in an Austrian university hospital. Survey amongst healthcare workers (HCW). Data were analyzed using descriptive statistics, Cronbach's alpha was calculated as a measure of internal consistencies of scales. Analysis of variance and t-tests were used. The survey was conducted in 2017. About 2.149 HCW from three departments were asked to participate. To measure speaking up behavior and safety climate. To explore psychological safety, encouraging environment and resignation towards speaking up. About 859 evaluable questionnaires were returned (response rate: 40%). More than 50% of responders perceived specific concerns about patient safety within the last 4 weeks and observed a potential error or noticed rule violations. For the different items, between 16% and 42% of HCW reported that they remained silent though concerns for safety. In contrast, between 96% and 98% answered that they did speak up in certain situations. The psychological safety for speaking up was lower for HCW with a managerial function (P speak up (P speaking up behaviors for the first time in an Austrian university hospital. Only moderately frequent concerns were in conflict with frequent speaking up behaviors. These results clearly show that a paradigm shift is needed to increase speaking up culture.

Requirements to be met by the operation manual

International Nuclear Information System (INIS)

1981-03-01

The rule applies to the contents and the lay-out of the operating manual for stationary nuclear power plants. The draft contains: 1. General requirement to be met by the contents of the operating manual. The operating manual to be arranged in 4 parts (part 1: internal rules and regulations; part 2: operation overall plant; part 3: incidents; part 4: operation systems). Safety specifications to be included in the manual, the exemption being the system of technical documentation. 2. General requirements to be met by the lay-out of the operating manual. Comprehensibility; legibility; structure and subdivisions; arrangement of the instructions and design of the manuals cover. 3. Requirements to be met by part 1. Defining the various internal rules and regulations (personnel management); rules and regulations concerning inspections and shift work; maintenance and repair; radiation protection; guard duty and admission; alarm; fire protection; first aid. 4. Requirements to be met by part 2. Provisions and operational limitations; limit values important from the point of view of safety; normal operation; anomalous operation; in-service inspections. 6. Requirements to be met by part 3. 7. Annex: Rules, regulations and stipulations mentioned in the rule draft. (orig.)

Efficacy and Safety of Manual Partial Red Cell Exchange in the Management of Severe Complications of Sickle Cell Disease in a Developing Country

Directory of Open Access Journals (Sweden)

B. F. Faye

2017-01-01

Full Text Available Introduction. The realization of red cell exchange (RCE in Africa faces the lack of blood, transfusion safety, and equipment. We evaluated its efficacy and safety in severe complications of sickle cell disease. Patients and Method. Manual partial RCE was performed among sickle cell patients who had severe complications. Efficacy was evaluated by clinical evolution, blood count, and electrophoresis of hemoglobin. Safety was evaluated on adverse effects, infections, and alloimmunization. Results. We performed 166 partial RCE among 44 patients including 41 homozygous (SS and 2 heterozygous composites SC and 1 S/β0-thalassemia. The mean age was 27.9 years. The sex ratio was 1.58. The regression of symptoms was complete in 100% of persistent vasoocclusive crisis and acute chest syndrome, 56.7% of intermittent priapism, and 30% of stroke. It was partial in 100% of leg ulcers and null in acute priapism. The mean variations of hemoglobin and hematocrit rate after one procedure were, respectively, +1.4 g/dL and +4.4%. That of hemoglobin S after 2 consecutive RCE was −60%. Neither alloimmunization nor viral seroconversion was observed. Conclusion. This work shows the feasibility of manual partial RCE in a low-resource setting and its efficacy and safety during complications of SCD outside of acute priapism.

Efficacy and Safety of Manual Partial Red Cell Exchange in the Management of Severe Complications of Sickle Cell Disease in a Developing Country

Science.gov (United States)

Sow, D.; Seck, M.; Dieng, N.; Toure, S. A.; Gadji, M.; Senghor, A. B.; Gueye, Y. B.; Sy, D.; Sall, A.; Dieye, T. N.; Toure, A. O.; Diop, S.

2017-01-01

Introduction The realization of red cell exchange (RCE) in Africa faces the lack of blood, transfusion safety, and equipment. We evaluated its efficacy and safety in severe complications of sickle cell disease. Patients and Method Manual partial RCE was performed among sickle cell patients who had severe complications. Efficacy was evaluated by clinical evolution, blood count, and electrophoresis of hemoglobin. Safety was evaluated on adverse effects, infections, and alloimmunization. Results We performed 166 partial RCE among 44 patients including 41 homozygous (SS) and 2 heterozygous composites SC and 1 S/β0-thalassemia. The mean age was 27.9 years. The sex ratio was 1.58. The regression of symptoms was complete in 100% of persistent vasoocclusive crisis and acute chest syndrome, 56.7% of intermittent priapism, and 30% of stroke. It was partial in 100% of leg ulcers and null in acute priapism. The mean variations of hemoglobin and hematocrit rate after one procedure were, respectively, +1.4 g/dL and +4.4%. That of hemoglobin S after 2 consecutive RCE was −60%. Neither alloimmunization nor viral seroconversion was observed. Conclusion This work shows the feasibility of manual partial RCE in a low-resource setting and its efficacy and safety during complications of SCD outside of acute priapism. PMID:28584527

Spent Nuclear Fuel Project Cold Vacuum Drying Facility Operations Manual

International Nuclear Information System (INIS)

IRWIN, J.J.

1999-01-01

This document provides the Operations Manual for the Cold Vacuum Drying Facility (CVDF). The Manual was developed in conjunction with HNF-553, Spent Nuclear Fuel Project Final Safety Analysis Report Annex B--Cold Vacuum Drying Facility. The HNF-SD-SNF-DRD-002, 1999, (Cold Vacuum Drying Facility Design Requirements), Rev. 4. and the CVDF Final Design Report. The Operations Manual contains general descriptions of all the process, safety and facility systems in the CVDF, a general CVD operations sequence and references to the CVDF System Design Descriptions (SDDs). This manual has been developed for the SNFP Operations Organization and shall be updated, expanded, and revised in accordance with future design, construction and startup phases of the CVDF until the CVDF final ORR is approved

Microbial ecology laboratory procedures manual NASA/MSFC

Science.gov (United States)

Huff, Timothy L.

1990-01-01

An essential part of the efficient operation of any microbiology laboratory involved in sample analysis is a standard procedures manual. The purpose of this manual is to provide concise and well defined instructions on routine technical procedures involving sample analysis and methods for monitoring and maintaining quality control within the laboratory. Of equal importance is the safe operation of the laboratory. This manual outlines detailed procedures to be followed in the microbial ecology laboratory to assure safety, analytical control, and validity of results.

THE CONCEPT OF MANUAL SKILL EDUCATION IN STOMATOLOGY AT “APOLLONIA” UNIVERSITY OF IASI

Directory of Open Access Journals (Sweden)

V. BURLUI

2013-03-01

Full Text Available In the usual university curricula of stomatology, the aspects related to the education and preservation of manual skills are not thoroughly and sufficiently studied, which explains the theme of the present study, dedicated to the reorganization of the curricula content of the disciplines involved in the development of practical competences in the field. Each student possesses a certain individual manual skill, understood by the teacher only superficially, which is also the case of his natural aptitudes and deficiencies. That is why, the training developed during student years should be prolongued along the whole professional career of the stomatologist, which requires changing of one’s usual attitude versus his own performances, along with a conscious and continuous education for maintaining and developing the expected practical competences. Special attention should be paid to avoiding physical and psychic fatigue, by a corresponding dosage of the intensity of one’s activity, along with a suitable prophylaxy of occupational pathology by practising of relaxation exercises adapted to such a specific profession. An important premise of the implementation of the concept of manual skill refers to the fact that instrumentalized parctising of dental medicine, always influenced by the continuous technological development, assumes the utilization of a large range of medical apparata and devices, in the absence of which stomatology would be a wholly different thing. Organization of an ergonomic stomatological system represents another important objective of the program of skill education as, in itself, it does not cover the shortcomings of a disordered activity. Essential in such situations is the sequential knowledge of the execution times for the various restorative dental, endodontic, periodontal, surgical, prosthetic procedures, on categories of age, the realization of which maintains the manual skills, by their execution on electro-mechanical and

Relating safety, productivity and company type for motor-manual logging operations in the Italian Alps.

Science.gov (United States)

Montorselli, Niccolò Brachetti; Lombardini, Carolina; Magagnotti, Natascia; Marchi, Enrico; Neri, Francesco; Picchi, Gianni; Spinelli, Raffaele

2010-11-01

The study compared the performance of four different logging crews with respect to productivity, organization and safety. To this purpose, the authors developed a data collection method capable of providing a quantitative analysis of risk-taking behavior. Four crews were tested under the same working conditions, representative of close-to-nature alpine forestry. Motor-manual working methods were applied, since these methods are still prevalent in the specific study area, despite the growing popularity of mechanical processors. Crews from public companies showed a significantly lower frequency of risk-taking behavior. The best safety performance was offered by the only (public) crew that had been administered formal safety training. The study seems to deny the common prejudice that safety practice is inversely proportional to productivity. Instead, productivity is increased by introducing more efficient working methods and equipment. The quantitative analysis of risk-taking behavior developed in this study can be applied to a number of industrial fields besides forestry. Characterizing risk-taking behavior for a given case may eventually lead to the development of custom-made training programmes, which may address problem areas while avoiding that the message is weakened by the inclusion of redundant information. In the specific case of logging crews in the central Alps, the study suggests that current training courses may be weak on ergonomics, and advocates a staged training programme, focusing first on accident reduction and then expanding to the prevention of chronic illness. 2010 Elsevier Ltd. All rights reserved.

Health and Safety Audit Design Manual

Energy Technology Data Exchange (ETDEWEB)

Ternes, Mark P. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Langley, Brandon R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Accawi, Gina K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Malhotra, Mini [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-10-01

The Health and Safety Audit is an electronic audit tool developed by the Oak Ridge National Laboratory to assist in the identification and selection of health and safety measures when a home is being weatherized (i.e., receiving home energy upgrades), especially as part of the US Department of Energy (DOE) Weatherization Assistance Program, or during home energy-efficiency retrofit or remodeling jobs. The audit is specifically applicable to existing single-family homes (including mobile homes), and is generally applicable to individual dwelling units in low-rise multifamily buildings. The health and safety issues covered in the audit are grouped in nine categories: mold and moisture, lead, radon, asbestos, formaldehyde and volatile organic compounds (VOCs), combustion, pest infestation, safety, and ventilation. Development of the audit was supported by the US Department of Housing and Urban Development Office of Healthy Homes and Lead Hazard Control and the DOE Weatherization Assistance Program.

Spent Nuclear Fuel (SNF) Cold Vacuum Drying (CVD) Facility Operations Manual

Energy Technology Data Exchange (ETDEWEB)

IRWIN, J.J.

1999-07-02

This document provides the Operations Manual for the Cold Vacuum Drying Facility (CVDF). The Manual was developed in conjunction with HNF-553, Spent Nuclear Fuel Project Final Safety Analysis Report Annex B--Cold Vacuum Drying Facility. The HNF-SD-SNF-DRD-002, 1999, Cold Vacuum Drying Facility Design Requirements, Rev. 4, and the CVDF Final Design Report. The Operations Manual contains general descriptions of all the process, safety and facility systems in the CVDF, a general CVD operations sequence and references to the CVDF System Design Descriptions (SDDs). This manual has been developed for the SNFP Operations Organization and shall be updated, expanded, and revised in accordance with future design, construction and startup phases of the CVDF until the CVDF final ORR is approved.

Universal Fast Breeder Reactor Subassembly Counter manual

International Nuclear Information System (INIS)

Menlove, H.O.; Eccleston, G.W.; Swansen, J.E.; Goris, P.; Abedin-Zadeh, R.; Ramalho, A.

1984-08-01

A neutron coincidence counter has been designed for the measurement of fast breeder reactor fuel assemblies. This assay system can accommodate the full range of geometries and masses found in fast breeder subassemblies under IAEA safeguards. The system's high-performance capability accommodates high plutonium loadings of up to 16 kg. This manual describes the system and its operation and gives performance and calibration parameters for typical applications

Spent nuclear fuel project cold vacuum drying facility operations manual

International Nuclear Information System (INIS)

IRWIN, J.J.

1999-01-01

This document provides the Operations Manual for the Cold Vacuum Drying Facility (CVDF). The Manual was developed in conjunction with HNF-SD-SNF-SAR-002, Safety Analysis Report for the Cold Vacuum Drying Facility, Phase 2, Supporting Installation of Processing Systems (Garvin 1998) and, the HNF-SD-SNF-DRD-002, 1997, Cold Vacuum Drying Facility Design Requirements, Rev. 3a. The Operations Manual contains general descriptions of all the process, safety and facility systems in the CVDF, a general CVD operations sequence, and has been developed for the SNFP Operations Organization and shall be updated, expanded, and revised in accordance with future design, construction and startup phases of the CVDF until the CVDF final ORR is approved

Mort User's Manual: For use with the Management Oversight and Risk Tree analytical logic diagram

Energy Technology Data Exchange (ETDEWEB)

Knox, N.W.; Eicher, R.W.

1992-02-01

This report contains the User's Manual for MORT (Management Oversight and Risk Tree), a logic diagram in the form of a work sheet'' that illustrates a long series of interrelated questions. MORT is a comprehensive analytical procedure that provides a disciplined method for determining the causes and contributing factors of major accidents. Alternatively, it serves as a tool to evaluate the quality of an existing system. While similar in many respects to fault tree analysis, MORT is more generalized and presents over 1500 specific elements of an ideal universal'' management program for optimizing environment, safety and health, and other programs. This User's Manual is intended to be used with the MORT diagram dated February 1992.

L-059: EPR-First responders: Radiological emergency manual for first responders

International Nuclear Information System (INIS)

2011-01-01

This conference is an emergency manual review about the first responders knowledge. The IAEA safety standard manuals, the medical gestion, the security forces and the fast communications are very important in a radiological emergency

Universal Fast Breeder Reactor Subassembly Counter manual

Energy Technology Data Exchange (ETDEWEB)

Menlove, H.O.; Eccleston, G.W.; Swansen, J.E.; Goris, P.; Abedin-Zadeh, R.; Ramalho, A.

1984-08-01

A neutron coincidence counter has been designed for the measurement of fast breeder reactor fuel assemblies. This assay system can accommodate the full range of geometries and masses found in fast breeder subassemblies under IAEA safeguards. The system's high-performance capability accommodates high plutonium loadings of up to 16 kg. This manual describes the system and its operation and gives performance and calibration parameters for typical applications.

Spent Nuclear Fuel (SNF) Cold Vacuum Drying (CVD) Facility Operations Manual; FINAL

International Nuclear Information System (INIS)

IRWIN, J.J.

1999-01-01

This document provides the Operations Manual for the Cold Vacuum Drying Facility (CVDF). The Manual was developed in conjunction with HNF-553, Spent Nuclear Fuel Project Final Safety Analysis Report Annex B-Cold Vacuum Drying Facility. The HNF-SD-SNF-DRD-002, 1999, Cold Vacuum Drying Facility Design Requirements, Rev. 4, and the CVDF Final Design Report. The Operations Manual contains general descriptions of all the process, safety and facility systems in the CVDF, a general CVD operations sequence and references to the CVDF System Design Descriptions (SDDs). This manual has been developed for the SNFP Operations Organization and shall be updated, expanded, and revised in accordance with future design, construction and startup phases of the CVDF until the CVDF final ORR is approved

WAM-E user's manual

International Nuclear Information System (INIS)

Rayes, L.G.; Riley, J.E.

1986-07-01

The WAM-E series of mainframe computer codes have been developed to efficiently analyze the large binary models (e.g., fault trees) used to represent the logic relationships within and between the systems of a nuclear power plant or other large, multisystem entity. These codes have found wide application in reliability and safety studies of nuclear power plant systems. There are now nine codes in the WAM-E series, with six (WAMBAM/WAMTAP, WAMCUT, WAMCUT-II, WAMFM, WAMMRG, and SPASM) classified as Type A Production codes and the other three (WAMFTP, WAMTOP, and WAMCONV) classified as Research codes. This document serves as a combined User's Guide, Programmer's Manual, and Theory Reference for the codes, with emphasis on the Production codes. To that end, the manual is divided into four parts: Part I, Introduction; Part II, Theory and Numerics; Part III, WAM-E User's Guide; and Part IV, WAMMRG Programmer's Manual

ETAP user's manual

International Nuclear Information System (INIS)

Watanabe, Norio; Higuchi, Suminori.

1990-11-01

The event tree analysis technique has been used in Probabilistic Safety Assessment for LWRs to delineate various accident scenarios leading to core melt or containment failure and to evaluate their frequencies. This technique often requires manual preparation of event trees with iterative process and time-consuming work in data handling. For the purpose of reducing manual efforts in event tree analysis, we developed a new software package named ETAP (Event Tree Analysis Supporting Program) for event tree analysis. ETAP is an interactive PC-based program which has the ability to construct, update, document, and quantify event trees. Because of its fast running capability to quantify event trees, use of the EATP program can make it easy to perform the sensitivity studies on a variety of system/containment performance issues. This report provides a user's manual for ETAP, which describes the structure, installation, and use of EATP. This software runs on NEC/PC-9800 or compatible PCs that have a 640 KB memory and MS-DOS 2.11 or higher. (author)

OSH technical reference manual

Energy Technology Data Exchange (ETDEWEB)

1993-11-01

In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

Are Manual Typewriters Becoming Obsolete?

Science.gov (United States)

Johnston, Jean

1976-01-01

A University of Akron survey of the Akron area revealed that the general trend is for large companies to use manual typewriters in their business offices. Implications for typewriting instruction are discussed. (JT)

Regulations and Procedures Manual

Energy Technology Data Exchange (ETDEWEB)

Young, Lydia J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2011-07-25

The purpose of the Regulations and Procedures Manual (RPM) is to provide LBNL personnel with a reference to University and Lawrence Berkeley National Laboratory (LBNL or Laboratory) policies and regulations by outlining normal practices and answering most policy questions that arise in the day-to-day operations of Laboratory organizations. Much of the information in this manual has been condensed from detail provided in LBNL procedure manuals, Department of Energy (DOE) directives, and Contract DE-AC02-05CH11231. This manual is not intended, however, to replace any of those documents. RPM sections on personnel apply only to employees who are not represented by unions. Personnel policies pertaining to employees represented by unions may be found in their labor agreements. Questions concerning policy interpretation should be directed to the LBNL organization responsible for the particular policy. A link to the Managers Responsible for RPM Sections is available on the RPM home page. If it is not clear which organization is responsible for a policy, please contact Requirements Manager Lydia Young or the RPM Editor.

Regulations and Procedures Manual

Energy Technology Data Exchange (ETDEWEB)

Young, Lydia [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2010-09-30

The purpose of the Regulations and Procedures Manual (RPM) is to provide Laboratory personnel with a reference to University and Lawrence Berkeley National Laboratory policies and regulations by outlining the normal practices and answering most policy questions that arise in the day-to-day operations of Laboratory departments. Much of the information in this manual has been condensed from detail provided in Laboratory procedure manuals, Department of Energy (DOE) directives, and Contract DE-AC02-05CH11231. This manual is not intended, however, to replace any of those documents. The sections on personnel apply only to employees who are not represented by unions. Personnel policies pertaining to employees represented by unions may be found in their labor agreements. Questions concerning policy interpretation should be directed to the department responsible for the particular policy. A link to the Managers Responsible for RPM Sections is available on the RPM home page. If it is not clear which department should be called, please contact the Associate Laboratory Director of Operations.

Manual on industrial radiography

International Nuclear Information System (INIS)

1981-08-01

This manual is intended as a source of educational material to personnel seeking certification as industrial radiographers, and as a guide and reference text for educational organizations that are providng courses in industrial radiography. It covers the basic principles of x-ray and gamma radiation, radiation safety, films and film processing, welding, casting and forging, aircraft structures and components, radiographic techniques, and records

Food Safety Education for Students and Workers in School Gardens and University Farms

Science.gov (United States)

Dzubak, John; Shaw, Angela; Strohbehn, Catherine; Naeve, Linda

2016-01-01

The number of school gardens and university farms is increasing in the United States. Produce grown in these venues is often sampled in the classroom or incorporated into the food chain. Food safety education for students and workers is needed to ensure that produce is safe. Two 1-hr food safety curricula were developed to inform K-12 students and…

Methane measurements manual; Handbok metanmaetningar

Energy Technology Data Exchange (ETDEWEB)

Holmgren, Magnus Andreas (SP Technical research institute of Sweden, Boraas (Sweden))

2011-02-15

Emissions to air in different parts of the system may arise in biogas plants, where there is biological treatment of organic matter by anaerobic degradation, and during upgrading of biogas to vehicle fuel. There are mainly four reasons why these emissions must be minimized. These are safety, greenhouse gas emissions, economy and smell. This manual gathers experience of several years of work with measurement of methane emissions from biogas and upgrading facilities. This work has been done mainly in the context of Swedish Waste Management's system of voluntary commitment. The purpose of this manual is to standardize methods and procedures when methane measurements are carried out so that the results are comparable between different providers. The main target group of the manual is measurement consultants performing such measurements. Calculation template in Excel is part of the manual, which further contributes to the measurements evaluated in a standardized way. The manual contains several examples which have been calculated in the accompanying Excel template. The handbook also contains a chapter mainly intended for facility staff, in which implementation of accurate leak detection is described, and where there are hints of a system of so-called intermediate inspections to detect leaks in time

A systematic approach for safety evidence collection in the safety-critical domain

NARCIS (Netherlands)

Lin, H.; Wu, Ji; Yuan, C.; Luo, Y.; Brand, van den M.G.J.; Engelen, L.J.P.

2015-01-01

In order to show that the required safety objectives are met, it is necessary to collect safety evidence in the form of consistent and complete data. However, manual safety evidence collection is usually tedious and time-consuming, due to a large number of artifacts and implicit relations between

Safety considerations of new critical assembly for the Research Reactor Institute, Kyoto University

International Nuclear Information System (INIS)

Umeda, Iwao; Matsuoka, Naomi; Harada, Yoshihiko; Miyamoto, Keiji; Kanazawa, Takashi

1975-01-01

The new critical assembly type of nuclear reactor having three cores for the first time in the world was completed successfully at the Research Reactor Institute of Kyoto University in autumn of 1974. It is called KUCA (Kyoto University Critical Assembly). Safety of the critical assembly was considered sufficiently in consequence of discussions between the researchers of the institute and the design group of our company, and then many bright ideas were created through the discussions. This paper is described the new safety design of main equipments - oil pressure type center core drive mechanism, removable water overflow mechanism, core division mechanism, control rod drive mechansim, protection instrumentation system and interlock key system - for the critical assembly. (author)

14 CFR 135.23 - Manual contents.

Science.gov (United States)

2010-01-01

... AND ON DEMAND OPERATIONS AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT General § 135.23 Manual... this section, to assist each crewmember and person performing or directly supervising the following job... Analysis establishing runway safety margins at destination airports, taking into account the following...

Modern design and safety analysis of the University of Florida Training Reactor

International Nuclear Information System (INIS)

Jordan, K.A.; Springfels, D.; Schubring, D.

2015-01-01

Highlights: • A new safety analysis of the University of Florida Training Reactor is presented. • This analysis uses modern codes and replaces the NRC approved analysis from 1982. • Reduction in engineering margin confirms that the UFTR is a negligible risk reactor. • Safety systems are not required to ensure that safety limits are not breached. • Negligible risk reactors are ideal for testing digital I&C equipment. - Abstract: A comprehensive series of neutronics and thermal hydraulics analyses were conducted to demonstrate the University of Florida Training Reactor (UFTR), an ARGONAUT type research reactor, as a negligible risk reactor that does not require safety-related systems or components to prevent breach of a safety limit. These analyses show that there is no credible UFTR accident that would result in major fuel damage or risk to public health and safety. The analysis was based on two limiting scenarios, whose extremity bound all other accidents of consequence: (1) the large step insertion of positive reactivity and (2) the release of fission products due to mechanical damage to a spent fuel plate. The maximum step insertion of positive reactivity was modeled using PARET/ANL software and shows a maximum peak fuel temperature of 283.2 °C, which is significantly below the failure limit of 530 °C. The exposure to the staff and general public was calculated for the worst-case fission product release scenario using the ORIGEN-S and COMPLY codes and was shown to be 6.5% of the annual limit. Impacts on reactor operations and an Instrumentation & Control System (I&C) upgrade are discussed

Modern design and safety analysis of the University of Florida Training Reactor

Energy Technology Data Exchange (ETDEWEB)

Jordan, K.A., E-mail: kjordan@ufl.edu [University of Florida, 106 UFTR Bldg., PO Box 116400, Gainesville, FL 32611-6400 (United States); Springfels, D., E-mail: dspringfels@ufl.edu [University of Florida, 106 UFTR Bldg., PO Box 116400, Gainesville, FL 32611-6400 (United States); Schubring, D., E-mail: dlschubring@ufl.edu [University of Florida, 202 Nuclear Science Building, PO Box 118300, Gainesville, FL 32611-8300 (United States)

2015-05-15

Highlights: • A new safety analysis of the University of Florida Training Reactor is presented. • This analysis uses modern codes and replaces the NRC approved analysis from 1982. • Reduction in engineering margin confirms that the UFTR is a negligible risk reactor. • Safety systems are not required to ensure that safety limits are not breached. • Negligible risk reactors are ideal for testing digital I&C equipment. - Abstract: A comprehensive series of neutronics and thermal hydraulics analyses were conducted to demonstrate the University of Florida Training Reactor (UFTR), an ARGONAUT type research reactor, as a negligible risk reactor that does not require safety-related systems or components to prevent breach of a safety limit. These analyses show that there is no credible UFTR accident that would result in major fuel damage or risk to public health and safety. The analysis was based on two limiting scenarios, whose extremity bound all other accidents of consequence: (1) the large step insertion of positive reactivity and (2) the release of fission products due to mechanical damage to a spent fuel plate. The maximum step insertion of positive reactivity was modeled using PARET/ANL software and shows a maximum peak fuel temperature of 283.2 °C, which is significantly below the failure limit of 530 °C. The exposure to the staff and general public was calculated for the worst-case fission product release scenario using the ORIGEN-S and COMPLY codes and was shown to be 6.5% of the annual limit. Impacts on reactor operations and an Instrumentation & Control System (I&C) upgrade are discussed.

Considerations to improve the safety of cervical spine manual therapy.

Science.gov (United States)

Hutting, Nathan; Kerry, Roger; Coppieters, Michel W; Scholten-Peeters, Gwendolijne G M

2018-02-01

Manipulation and mobilisation of the cervical spine are well established interventions in the management of patients with headache and/or neck pain. However, their benefits are accompanied by potential, yet rare risks in terms of serious adverse events, including neurovascular insult to the brain. A recent international framework for risk assessment and management offers directions in the mitigation of this risk by facilitating sound clinical reasoning. The aim of this article is to critically reflect on and summarize the current knowledge about cervical spine manual therapy and to provide guidance for clinical reasoning for cervical spine manual therapy. Copyright © 2017 Elsevier Ltd. All rights reserved.

H. W. Laboratory manual: 100 Area section

Energy Technology Data Exchange (ETDEWEB)

1950-07-01

The purpose of this manual is to present a Hazard Breakdown of all jobs normally encountered in the laboratory work of the three sections comprising the Analytic Section, Metallurgy and Control Division of the Technical Department. A Hazard Breakdown is a careful analysis of any job in which the source of possible dangers is clearly indicated for each particular step. The analysis is prepared by individuals who are thoroughly familiar with the specific job or procedure. It is felt that if the hazards herein outlined are recognized by the Laboratory personnel and the suggested safety cautions followed, the chance for injury will be minimized and the worker will become generally more safety conscious. The manual, which is prefaced by the general safety rules applying to all the laboratories, is divided into three main sections, one for each of the three sections into which the Laboratories Division is divided. These sections are as follows: Section 1 -- 200 Area Control; Section 2 -- 100 Area Control; Section 3 -- 300 Area Control, Essential Materials, and Methods Improvement.

Assessing the Food Safety Knowledge of University of Maine Students

Science.gov (United States)

Ferk, Chelsea C.; Calder, Beth L.; Camire, Mary Ellen

2016-01-01

Foodborne illness is a global public health issue. Young adults may work in foodservice while they are university students, and their habits may later shape the practices and well-being of their children. The objective of this study was to establish baseline data and assess the food safety knowledge of 18- to 26-year-old Univ. of Maine students.…

Manual on quality assurance for the survey, evaluation and confirmation of nuclear power plant sites

International Nuclear Information System (INIS)

1987-04-01

The present Manual on Quality Assurance for the Survey, Evaluation and Confirmation of Nuclear Power Plant Sites contains supporting material and illustrates examples for implementing the requirements contained in the Code of Practice on Quality Assurance for Safety in Nuclear Power Plants to the activities of survey, evaluation and confirmation of nuclear power plant sites. At the same time the Code of Practice for Safety in Nuclear Power Plant Siting, and Safety Guides in the siting series contain requirements and recommendations to implement a quality assurance programme in selected activities of the siting process. This manual is intended to provide guidance and illustrate examples on this implementation. During preparation and reviews of this Manual it was found out that the methodology of implementation of the quality assurance programme in siting activities is still under development. For these reasons it was considered appropriate to publish this Manual as a temporary publication for trial use

Naturalistic driving observations of manual and visual-manual interactions with navigation systems and mobile phones while driving.

NARCIS (Netherlands)

Christoph, M. Nes, N. van & Knapper, A.

2014-01-01

This paper discusses a naturalistic driving study on the use of mobile phones and navigation systems while driving. Manual interactions with these devices while driving can cause distraction from the driving task and reduce traffic safety. In this study 21 subjects were observed for 5 weeks. Their

Spent Nuclear Fuel (SNF) Project Cold Vacuum Drying (CVD) Facility Operations Manual

Energy Technology Data Exchange (ETDEWEB)

IRWIN, J.J.

2000-02-03

This document provides the Operations Manual for the Cold Vacuum Drying Facility (CVDF). The Manual was developed in conjunction with HNF-SD-SNF-SAR-002, Safety Analysis Report for the Cold Vacuum Drying Facility, Phase 2, Supporting Installation of the Processing Systems (Garvin 1998) and, the HNF-SD-SNF-DRD-002, 1997, Cold Vacuum Drying Facility Design Requirements, Rev. 3a. The Operations Manual contains general descriptions of all the process, safety and facility systems in the CVDF, a general CVD operations sequence, and has been developed for the spent nuclear fuel project (SNFP) Operations Organization and shall be updated, expanded, and revised in accordance with future design, construction and startup phases of the CVDF until the CVDF final ORR is approved.

Spent Nuclear Fuel (SNF) Project Cold Vacuum Drying (CVD) Facility Operations Manual

International Nuclear Information System (INIS)

IRWIN, J.J.

2000-01-01

This document provides the Operations Manual for the Cold Vacuum Drying Facility (CVDF). The Manual was developed in conjunction with HNF-SD-SNF-SAR-002, Safety Analysis Report for the Cold Vacuum Drying Facility, Phase 2, Supporting Installation of the Processing Systems (Garvin 1998) and, the HNF-SD-SNF-DRD-002, 1997, Cold Vacuum Drying Facility Design Requirements, Rev. 3a. The Operations Manual contains general descriptions of all the process, safety and facility systems in the CVDF, a general CVD operations sequence, and has been developed for the spent nuclear fuel project (SNFP) Operations Organization and shall be updated, expanded, and revised in accordance with future design, construction and startup phases of the CVDF until the CVDF final ORR is approved

Nuclear criticality safety program at the University of Tennessee-Knoxville

International Nuclear Information System (INIS)

Basoglu, B.; Bentley, C.; Brewer, R.; Dunn, M.; Haught, C.; Plaster, M.; Wilkinson, A.; Dodds, H.; Elliott, E.; Waddell, W.

1993-01-01

This paper presents an overview of the nuclear criticality safety (NCS) educational program at the University of Tennessee-Knoxville. The program is an academic specialization for nuclear engineering graduate students pursuing either the MS or PhD degree and includes special NCS courses and NCS research projects. Both the courses and the research projects serve as partial fulfillment of the requirements for the degree being pursued

Integration of a browser based operator manual in the system environment of a process computer system

International Nuclear Information System (INIS)

Weber, Andreas; Erfle, Robert; Feinkohl, Dirk

2012-01-01

The integration of a browser based operator manual in the system environment of a process computer system is an optimization of the operating procedure in the control room and a safety enhancement due to faster and error-free access to the manual contents. Several requirements by the authorities have to be fulfilled: the operating manual has to be available as hard copy, the format has to be true to original, protection against manipulation has to be provided, the manual content of the browser-based version and the hard copy have to identical, and the display presentation has to be consistent with ergonomic principals. The integration of the on-line manual in the surveillance process computer system provides the operator with the relevant comments to the surveillance signal. The described integration of the on-line manual is an optimization of the operator's everyday job with respect to ergonomics and safety (human performance).

[Drug supply chain safety in hospitals: current data and experience of the Grenoble university hospital].

Science.gov (United States)

Bedouch, P; Baudrant, M; Detavernier, M; Rey, C; Brudieu, E; Foroni, L; Allenet, B; Calop, J

2009-01-01

Drug supply chain safety has become a priority for public health which implies a collective process. This process associates all health professionals including the pharmacist who plays a major role. The objective of this present paper is to describe the several approaches proven effective in the reduction of drug-related problem in hospital, illustrated by the Grenoble University Hospital experience. The pharmacist gets involved first in the general strategy of hospital drug supply chain, second by his direct implication in clinical activities. The general strategy of drug supply chain combines risk management, coordination of the Pharmacy and Therapeutics Committee, selection and purchase of drugs and organisation of drug supply chain. Computer management of drug supply chain is a major evolution. Nominative drug delivering has to be a prior objective and its implementation modalities have to be defined: centralized or decentralized in wards, manual or automated. Also, new technologies allow the automation of overall drug distribution from central pharmacy and the implementation of automated drug dispensing systems into wards. The development of centralised drug preparation allows a safe compounding of high risk drugs, like cytotoxic drugs. The pharmacist should develop his clinical activities with patients and other health care professionals in order to optimise clinical decisions (medication review, drug order analysis) and patients follow-up (therapeutic monitoring, patient education, discharge consultation).

Construction safety program for the National Ignition Facility, Appendix B

Energy Technology Data Exchange (ETDEWEB)

Cerruti, S.J.

1997-06-26

This Appendix contains material from the LLNL Health and Safety Manual as listed below. For sections not included in this list, please refer to the Manual itself. The areas covered are: asbestos, lead, fire prevention, lockout, and tag program confined space traffic safety.

Construction safety program for the National Ignition Facility, Appendix B

International Nuclear Information System (INIS)

Cerruti, S.J.

1997-01-01

This Appendix contains material from the LLNL Health and Safety Manual as listed below. For sections not included in this list, please refer to the Manual itself. The areas covered are: asbestos, lead, fire prevention, lockout, and tag program confined space traffic safety

Safety Evaluation Report related to the renewal of the operating license for the research reactor at Pennsylvania State University

International Nuclear Information System (INIS)

1986-01-01

This Safety Evaluation Report for the application filed by the Pennsylvania State University for a renewal of Operating License R-2 to continue to operate the Pennsylvania State University Breazeale Reactor (PSBR) has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is located on the campus in University Park, Pennsylvania. On the basis of its technical review, the staff concludes that the reactor facility can continue to be operated by the university without endangering the health and safety of the public or the environment

S-HAL : safety handbook for locals.

Science.gov (United States)

2014-01-01

The Safety Handbook for Locals (S-HAL) is intended to be a comprehensive : traffic safety resource for all local communities in Missouri, be it cities or : counties. The S-HAL mirrors the national Highway Safety Manual (HSM) : (AASHTO, 2010) in using...

Food safety knowledge and hygiene practices among veterinary medicine students at Trakia University, Bulgaria.

Science.gov (United States)

Stratev, Deyan; Odeyemi, Olumide A; Pavlov, Alexander; Kyuchukova, Ralica; Fatehi, Foad; Bamidele, Florence A

The results from the first survey on food safety knowledge, attitudes and hygiene practices (KAP) among veterinary medicine students in Bulgaria are reported in this study. It was designed and conducted from September to December 2015 using structured questionnaires on food safety knowledge, attitudes and practices. Data were collected from 100 undergraduate veterinary medicine students from the Trakia University, Bulgaria. It was observed that the age and the gender did not affect food safety knowledge, attitudes and practices. There was no significant difference (p>0.05) on food safety knowledge and practices among students based on the years of study. A high level of food safety knowledge was observed among the participants (85.06%), however, the practice of food safety was above average (65.28%) while attitude toward food safety was high (70%). Although there was a significant awareness of food safety knowledge among respondents, there is a need for improvement on food safety practices, interventions on food safety and foodborne diseases. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Manual for environmental radiological surveillance

International Nuclear Information System (INIS)

Sumiya, Shuichi; Matsuura, Kenichi; Nakano, Masanao; Takeyasu, Masanori; Morisawa, Masato; Onuma, Toshimitsu; Fujita, Hiroki; Mizutani, Tomoko; Watanabe, Hajime; Sugai, Masamitsu

2010-03-01

Environmental radiation monitoring around the Tokai Reprocessing Plant has been conducted by the Nuclear Fuel Cycle Engineering Laboratories, based on 'Safety Regulations for the Reprocessing Plant of JAEA, Chapter IV - Environmental monitoring' and Environmental Radiation Monitoring Program decided by the Ibaraki prefectural government. The radiation monitoring installations and equipments were also prepared for emergency. This manual describes; (1) the installations of radiological measurement, (2) the installations of meteorological observation, and (3) environmental data processing system for executing the terrestrial environmental monitoring by Environmental Protection Section, Radiation Protection Department. The environmental monitoring has been operated through the manual published in 1993 (PNC TN8520 93-001). Then the whole articles were revised because the partially of installations and equipments having been updated in recent years. (author)

Manual vs. computer-assisted sperm analysis: can CASA replace manual assessment of human semen in clinical practice?

Science.gov (United States)

Talarczyk-Desole, Joanna; Berger, Anna; Taszarek-Hauke, Grażyna; Hauke, Jan; Pawelczyk, Leszek; Jedrzejczak, Piotr

2017-01-01

The aim of the study was to check the quality of computer-assisted sperm analysis (CASA) system in comparison to the reference manual method as well as standardization of the computer-assisted semen assessment. The study was conducted between January and June 2015 at the Andrology Laboratory of the Division of Infertility and Reproductive Endocrinology, Poznań University of Medical Sciences, Poland. The study group consisted of 230 men who gave sperm samples for the first time in our center as part of an infertility investigation. The samples underwent manual and computer-assisted assessment of concentration, motility and morphology. A total of 184 samples were examined twice: manually, according to the 2010 WHO recommendations, and with CASA, using the program set-tings provided by the manufacturer. Additionally, 46 samples underwent two manual analyses and two computer-assisted analyses. The p-value of p CASA and manually. In the group of patients where all analyses with each method were performed twice on the same sample we found no significant differences between both assessments of the same probe, neither in the samples analyzed manually nor with CASA, although standard deviation was higher in the CASA group. Our results suggest that computer-assisted sperm analysis requires further improvement for a wider application in clinical practice.

Ergonomics intervention in manual handling of oxygen

Directory of Open Access Journals (Sweden)

M Motamedzadeh

2013-05-01

Conclusion: With the implementation of ergonomic intervention is casting unit, the risk of exposure to musculoskeletal disorders caused by manual handling of oxygen cylinders was eliminated and safety of employees against the risk of explosion of the cylinders in comparison with before the intervention was improved.

Road safety audits: The way forward

CSIR Research Space (South Africa)

Labuschagne, FJJ

2010-08-01

Full Text Available The South African Road Safety Manual (SARSM) was published in 1999 and includes guidelines on road safety audits (RSA). The development of SARSM was a proactive process for improving the road environment with respect to road safety but was never...

Laboratory Safety Manual for Alabama Schools. Bulletin 1975. No. 20.

Science.gov (United States)

Alabama State Dept. of Education, Montgomery.

This document presents the Alabama State Department of Education guidelines for science laboratory safety, equipment, storage, chemical safety, rocket safety, electrical safety, safety with radioisotopes, and safety with biologicals. Also included is a brief bibliography, a teacher's checklist, a listing of laser facts and regulations, and a…

Study on attitudes of students of Islamic Azad University Tehran Medical Branch toward food safety, 2016.

Science.gov (United States)

Miri, Ali; Poursadeghiyan, Mohsen; Baneshi, Mohammad Mehdi; Biglari, Hamed; Yari, Ahmad Reza; Khammar, Alireza

2017-05-01

Given the importance of high-quality healthy food for humans, contamination control is the most important concern for healthy staff. To determine the attitudes of students at Islamic Azad University (Tehran Medical Branch) toward food safety. This cross-sectional and analytic-descriptive study was conducted on 326 students of Azad University of Medical Sciences in 2016. A self-made questionnaire consisting of 40 questions was used. The reliability of the questionnaire was confirmed using internal consistency method (Cronbach's alpha coefficient of 0.80). After collecting data, we use descriptive statistical indexes (mean and standard deviation) among demographic variables and the level of knowledge to describe and analyze the data. The participants' attitudes and operation are measured by Spearman tests, and the analytical results are given using SPSS version 20. According to the findings, 55.3, 30 and 14.7 percent of students had high, moderate and low attitude scores toward food safety, respectively. In addition, male and female students had equal attitudes toward food safety, and no significant relationship between sex and attitude was observed a significant difference (p>0.05), but between educational levels (p=0.008) and ages (p=0.001) of students significance was a positive correlation. Due to the low attitudes score of about half of the students of Islamic Azad University Tehran Medical Branch toward food safety, it can be claimed, food safety training in this community is required.

Right Of Way Pest Control. Manual 88.

Science.gov (United States)

Missouri Univ., Columbia. Agricultural Experiment Station.

This training manual provides information needed to meet the minimum EPA standards for certification as a commercial applicator of pesticides in the right-of-way pest control category. The text discusses types of vegetation, the nature of herbicides, application methods, use for specific situations, and safety precautions. (CS)

Waste Management Technical Manual

Energy Technology Data Exchange (ETDEWEB)

Buckingham, J.S. [ed.

1967-08-31

This Manual has been prepared to provide a documented compendium of the technical bases and general physical features of Isochem Incorporated`s Waste Management Program. The manual is intended to be used as a means of training and as a reference handbook for use by personnel responsible for executing the Waste Management Program. The material in this manual was assembled by members of Isochem`s Chemical Processing Division, Battelle Northwest Laboratory, and Hanford Engineering Services between September 1965 and March 1967. The manual is divided into the following parts: Introduction, contains a summary of the overall Waste Management Program. It is written to provide the reader with a synoptic view and as an aid in understanding the subsequent parts; Feed Material, contains detailed discussion of the type and sources of feed material used in the Waste Management Program, including a chapter on nuclear reactions and the formation of fission products; Waste Fractionization Plant Processing, contains detailed discussions of the processes used in the Waste Fractionization Plant with supporting data and documentation of the technology employed; Waste Fractionization Plant Product and Waste Effluent Handling, contains detailed discussions of the methods of handling the product and waste material generated by the Waste Fractionization Plant; Plant and Equipment, describes the layout of the Waste Management facilities, arrangement of equipment, and individual equipment pieces; Process Control, describes the instruments and analytical methods used for process control; and Safety describes process hazards and the methods used to safeguard against them.

Application of condition-based HRA method for a manual actuation of the safety features in a nuclear power Plant

International Nuclear Information System (INIS)

Kang, Hyun Gook; Jang, Seung-Cheol

2006-01-01

A practical approach to develop a more realistic fault-tree model with a consideration of various conditions endured by a human operator is proposed. In safety-critical systems, the generation failure of an actuation signal is caused by the concurrent failures of the automated systems and an operator action. These two sources of safety signals are complicatedly correlated. The failures of sensors or automated systems will cause a lack of necessary information for a human operator and result in error-forcing contexts such as the loss of corresponding alarms and indications. It is well known that the error-forcing contexts largely affect the operator's performance. An automated system which consists of multiple processing channels and complex components is also affected by the availability of the sensors. This paper proposes a condition-based human reliability assessment (CBHRA) method in order to address these complicated conditions in a practical way. We apply the CBHRA method to the manual actuation of the safety features such as a reactor trip and auxiliary feedwater actuation in Korean Standard Nuclear Power Plants. Even the human error probability of each given condition is simply assumed, the application results prove that the CBHRA effectively accommodates the complicated error-forcing contexts into the fault trees

EFFECT OF A ROAD SAFETY EDUCATION INTERVENTION ON ROAD SAFETY KNOWLEDGE OF UNIVERSITY DRIVERS IN IBADAN, NIGERIA.

Science.gov (United States)

Olumide, A O; Owoaje, E T

2016-06-01

It is essential for drivers employed in the formal sector to have good knowledge of road safety in order to safeguard their lives and those of the staff they are employed to drive. The study was conducted to determine the effect of a road safety education intervention on road safety knowledge of drivers employed in the University of Ibadan, Nigeria. A quasi-experimental study of 98 intervention and 78 control drivers selected using a cluster sampling technique was conducted. The intervention comprised a two-day training on road safety and first aid. The drivers' knowledge of road safety was measured at baseline, immediately and 4-months post-intervention. Aggregate scores of road safety knowledge were computed giving minimum and maximum obtainable scores of 0 and 16 respectively. Change in mean scores over the three measurement periods was assessed using Repeated Measures Analysis of Variance (ANOVA). Independent t-test was used to compare the scores between intervention and control drivers at each of the assessment periods. Twenty-nine drivers did not complete the study (attrition rate = 16.5%). At baseline, mean road safety knowledge scores for the intervention and control drivers were 12.7±2.2 and 12.9± 2.3 (p = 0.510) respectively. Immediately and four months post intervention, the scores of the intervention drivers were 13.8±1.9 and 12.8±1.6; while scores for the controls were 13.3±2.0 and 13.2±1.8. Repeated measures ANOVA revealed that the increase in knowledge over the three assessment periods was not statistically significant. The intervention resulted in an initial increase in road safety knowledge of the intervention drivers. However, this was not sustained to the forth month post-intervention. This finding suggests periodic refresher trainings to sustain the knowledge acquired.

The environmental survey manual

International Nuclear Information System (INIS)

1987-08-01

The purpose of this manual is to provide guidance to the Survey and Sampling and Analysis teams that conduct the one-time Environmental Survey of the major US Department of Energy (DOE) operating facilities. This manual includes a discussion of DOE's policy on environmental issues, a review of statutory guidance as it applies to the Survey, the procedures and protocols to be used by the Survey teams, criteria for the use of the Survey teams in evaluating existing environmental data for the Survey effort, generic technical checklists used in every Survey, health and safety guidelines for the personnel conducting the Survey, including the identification of potential hazards, prescribed protective equipment, and emergency procedures, the required formats for the Survey reports, guidance on identifying environmental problems that need immediate attention by the Operations Office responsible for the particular facility, and procedures and protocols for the conduct of sampling and analysis

General Mechanical Repair. Minor Automotive Maintenance, Small Engine [Repair, and] Welding: Student Manual.

Science.gov (United States)

Hamlin, Larry

This document is a student manual for a general mechanical repair course. Following a list of common essential elements of trade and industrial education, the manual is divided into three sections. The first section, on minor automotive maintenance, contains 13 units: automotive shop safety; engine principles; fuel system operation and repair;…

Applicator Training Manual for: Agricultural Animal Pest Control.

Science.gov (United States)

Christensen, Christian M.

This manual discusses pesticide safety and environmental considerations, pesticide toxicity, residue potential, pesticide formulations, and application techniques. In addition, descriptions of, and methods for controlling insects and related pests that attack cattle, sheep and goats, swine, horses and other equines, and poultry are given. These…

Light Water Reactor Generic Safety Issues Database (LWRGSIDB). User's manual

International Nuclear Information System (INIS)

1999-01-01

The IAEA Conference on 'The Safety of Nuclear Power: Strategy for the Future' in 1991 was a milestone in nuclear safety. The objective of this conference was to review nuclear power safety issues for which achieving international consensus would be desirable, to address concerns on nuclear safety and to formulate recommendations for future actions by national and international authorities to advance nuclear safety to the highest level. Two of the important items addressed by this conference were ensuring and enhancing safety of operating plants and treatment of nuclear power plants built to earlier safety standards. Some of the publications related to these two items that have been issued subsequent to this conference are: A Common Basis for Judging the Safety of Nuclear Power Plants Built to Earlier Standards, INSAG-8 (1995), the IAEA Safety Guide 50-SG-O12, Periodic Safety Review of Operational Nuclear Power Plants (1994) and IAEA Safety Reports Series No. 12, Evaluation of the Safety of Operating Nuclear Power Plants Built to Earlier Standards: A Common Basis for Judgement (1998). Some of the findings of the 1991 conference have not yet been fully addressed. An IAEA Symposium on Reviewing the Safety of Existing Nuclear Power Plants in 1996 showed that there is an urgent need for operating organizations and national authorities to review those operating nuclear power plants which do not reach the high safety levels of the vast majority of plants and to undertake improvements with assistance from the international community if required. Safety reviews of operating nuclear power plants take on added importance in the context of the Convention on Nuclear Safety and its implementation. In order to perform safety reviews and to reassess the safety of operating nuclear power plants in a uniform manner, it is imperative to have an internationally accepted reference. Existing guidance needs to be complemented by a list of safety issues which have been encountered and

Training Psychiatry Residents in Psychotherapy: The Role of Manualized Treatments.

Science.gov (United States)

Pagano, Joshua; Kyle, Brandon N; Johnson, Toni L; Saeed, Sy Atezaz

2017-06-01

Evidence-based treatment and manualized psychotherapy have a recent but rich history. As interest and research have progressed, defining the role of treatment manuals in resident training and clinical practice has become more important. Although there is not a universal definition of treatment manual, most clinicians and researchers agree that treatment manuals are an essential piece of evidence-based therapy, and that despite several limitations, they offer advantages in training residents in psychotherapy. Requirements for resident training in psychotherapy have changed over the years, and treatment manuals offer a simple and straightforward way to meet training requirements. In a search limited to only depression, two treatment manuals emerged with the support of research regarding both clinical practice and resident training. In looking toward the future, it will be important for clinicians to remain updated on further advances in evidence based manualized treatment as a tool for training residents in psychotherapy, including recent developments in online and smartphone based treatments.

Safety in Academic Chemistry Laboratories: Volume 1. Accident Prevention for College and University Students, 7th Edition.

Science.gov (United States)

American Chemical Society, Washington, DC.

This book contains volume 1 of 2 and describes safety guidelines for academic chemistry laboratories to prevent accidents for college and university students. Contents include: (1) "Your Responsibility for Accident Prevention"; (2) "Guide to Chemical Hazards"; (3) "Recommended Laboratory Techniques"; and (4) "Safety Equipment and Emergency…

Time Based Workload Analysis Method for Safety-Related Operator Actions in Safety Analysis

Energy Technology Data Exchange (ETDEWEB)

Kim, Yun Goo; Oh, Eung Se [Korea Hydro and Nuclear Power Co., Daejeon (Korea, Republic of)

2016-05-15

During the design basis event, the safety system performs safety functions to mitigate the event. The most of safety system is actuated by automatic system however, there are operator manual actions that are needed for the plant safety. These operator actions are classified as important human actions in human factors engineering design. The human factors engineering analysis and evaluation is needed for these important human actions to assure that operator successfully perform their tasks for plant safety and operational goals. The work load analysis is one of the required analysis for the important human actions.

Time Based Workload Analysis Method for Safety-Related Operator Actions in Safety Analysis

International Nuclear Information System (INIS)

Kim, Yun Goo; Oh, Eung Se

2016-01-01

During the design basis event, the safety system performs safety functions to mitigate the event. The most of safety system is actuated by automatic system however, there are operator manual actions that are needed for the plant safety. These operator actions are classified as important human actions in human factors engineering design. The human factors engineering analysis and evaluation is needed for these important human actions to assure that operator successfully perform their tasks for plant safety and operational goals. The work load analysis is one of the required analysis for the important human actions.

Large Hadron Collider manual

CERN Document Server

Lavender, Gemma

2018-01-01

What is the universe made of? How did it start? This Manual tells the story of how physicists are seeking answers to these questions using the world’s largest particle smasher – the Large Hadron Collider – at the CERN laboratory on the Franco-Swiss border. Beginning with the first tentative steps taken to build the machine, the digestible text, supported by color photographs of the hardware involved, along with annotated schematic diagrams of the physics experiments, covers the particle accelerator’s greatest discoveries – from both the perspective of the writer and the scientists who work there. The Large Hadron Collider Manual is a full, comprehensive guide to the most famous, record-breaking physics experiment in the world, which continues to capture the public imagination as it provides new insight into the fundamental laws of nature.

Procedures manual for the Oak Ridge Electron Linear Accelerator

International Nuclear Information System (INIS)

Todd, H.A.

1979-01-01

The Procedures Manual for the Oak Ridge Electron Linear Accelerator contains specific information pertaining to operation and safety of the facility. Items such as the interlock system, radiation monitoring, emergency procedures, night shift and weekend operation, and maintenance are discussed in detail

Manual on quality assurance programme auditing

International Nuclear Information System (INIS)

1984-01-01

The objective of this Manual is to provide guidance and illustrative examples of the methodology and techniques of internal and external audits that are consistent with the requirements and recommendations of the Code and the Safety Guide. The methodology and techniques are based on the practices of Member States having considerable experience in auditing QA programmes. This Manual is directed primarily towards QA programme auditors and managers and presents methods and techniques considered appropriate for the preparation and performance of audits and the evaluation of results. Its scope includes the techniques and methods used to carry out QA programme audits variously described as 'System', 'Product' and 'Process' audits. The techniques and methods described here may be used as one approach to the evaluation of suppliers' QA capabilities as defined in 50-SG-QA10. Although the Manual is primarily directed towards purchasers and suppliers, it is also relevant to regulatory organizations, such as government offices responsible for quality assurance, which carry out external audits independent of purchasers and suppliers. In such cases similar methods, procedures and techniques may be used

Safety management systems and their role in achieving high standards of operational safety

International Nuclear Information System (INIS)

Coulston, D.J.; Baylis, C.C.

2000-01-01

Achieving high standards of operational safety requires a robust management framework that is visible to all personnel with responsibility for its implementation. The structure of the management framework must ensure that all processes used to manage safety interlink in a logical and coherent manner, that is, they form a management system that leads to continuous improvement in safety performance. This Paper describes BNFL's safety management system (SMS). The SMS has management processes grouped within 5 main elements: 1. Policy, 2. Organisation, 3. Planning and Implementation, 4. Measuring and Reviewing Performance, 5. Audit. These elements reflect the overall process of setting safety objective (from Policy), measuring success and reviewing the performance. Effective implementation of the SMS requires senior managers to demonstrate leadership through their commitment and accountability. However, the SMS as a whole reflects that every employee at every level within BNFL is responsible for safety of operations under their control. The SMS therefore promotes a proactive safety culture and safe operations. The system is formally documented in the Company's Environmental, Health and Safety (EHS) Manual. Within in BNFL Group, the Company structures enables the Manual to provide overall SMS guidance and co-ordination to its range of nuclear businesses. Each business develops the SMS to be appropriate at all levels of its organisation, but ensuring that each level is consistent with the higher level. The Paper concludes with a summary of BNFL's safety performance. (author)

Quality assurance program manual for nuclear power plants. Volume I. Policies

International Nuclear Information System (INIS)

1976-01-01

The Consumers Power Company Quality Assurance Program Manual for Nuclear Power Plants consists of policies and procedures which comply with current NRC regulatory requirements and industry codes and standards in effect during the design, procurement, construction, testing, operation, refueling, maintenance, repair and modification activities associated with nuclear power plants. Specific NRC and industry documents that contain the requirements, including the issue dates in effect, are identified in each nuclear power plant's Safety Analysis Report. The requirements established by these documents form the basis for the Consumer Power Quality Assurance Program, which is implemented to control those structures, systems, components and operational safety actions listed in each nuclear power plant's Quality List (Q-List). As additional and revised requirements are issued by the NRC and professional organizations involved in nuclear activities, they will be reviewed for their impact on this manual, and changes will be made where considered necessary. CP Co 1--Consumers Power Company QA Program Topical Report is Volume I of this manual and contains Quality Assurance Program Policies applicable during all phases of nuclear power plant design, construction and operation

Functional safety measurement in the automotive domain : adaptation of PSM

NARCIS (Netherlands)

Luo, Y.; Stelma, J.; Brand, van den M.G.J.

2015-01-01

In the safety domain, safety standards are used as a development guideline to keep the risk at an acceptable level. Safety of the safety-critical systems can be assessed according to those safety standards. This assessment process is called safety assurance. Due to the manual work, the safety

SRL process hazards review manual

International Nuclear Information System (INIS)

1980-08-01

The principal objective of the Process Hazards Management Program is to provide a regular, systematic review of each process at the Savannah River Laboratory (SRL) to eliminate injuries and to minimize property damage resulting from process hazards of catastrophic potential. Management effort is directed, through the Du Pont Safety Program, toward those controls and practices that ensure this objective. The Process Hazards Management Program provides an additional dimension to further ensure the health and safety of employees and the public. Du Pont has concluded that an organized approach is essential to obtain an effective and efficient process hazards review. The intent of this manual is to provide guidance in creating such an organized approach to performing process hazards reviews on a continuing basis

A Waiter's Work Manual at Restaurang Käringsund

OpenAIRE

Riska, Cassandra

2010-01-01

This work is written as a final thesis in Vaasa University of Applied Sciences. The thesis’ purpose is to create a work manual for the waiters at Restaurang Käringsund on the Åland Islands. The theory part in the thesis brings up issues on what a work manual is, its purpose, outcome and content. Furthermore the case company is presented in the theory: history, operation, organisation and visions and goals. Mostly literary sources are used while they are considered as most reliable in comparis...

Optoelectronics circuits manual

CERN Document Server

Marston, R M

1999-01-01

This manual is a useful single-volume guide specifically aimed at the practical design engineer, technician, and experimenter, as well as the electronics student and amateur. It deals with the subject in an easy to read, down to earth, and non-mathematical yet comprehensive manner, explaining the basic principles and characteristics of the best known devices, and presenting the reader with many practical applications and over 200 circuits. Most of the ICs and other devices used are inexpensive and readily available types, with universally recognised type numbers.The second edition

Motorcycle Safety Education Programs: Report of a Survey of State Departments of Education and of Colleges and Universities.

Science.gov (United States)

American Driver and Traffic Safety Education Association, Washington, DC.

A survey of State departments of education and colleges and universities, conducted by the Motorcycle Industry Council Safety and Education Foundation, revealed the need for more teacher education programs, instructional materials, and organized workshops that promote motorcycle safety education. The primary interest indicated by State departments…

Accelerator safety program at the Lawrence Livermore Laboratory

International Nuclear Information System (INIS)

Graham, C.L.

1976-01-01

A proposed accelerator safety standard for the Lawrence Livermore Laboratory (LLL) is given. All accelerators will comply with this standard when it is included in the LLL Health and Safety Manual. The radiation alarm and radiation safety system for a radiography facility are also described

Assessment of Patient Safety Friendly Hospital Initiative in Three Hospitals Affiliated to Tehran University of Medical Sciences

Directory of Open Access Journals (Sweden)

Firoozeh Bairami

2016-01-01

Full Text Available Introduction: The aim of this study was to assess the status of patient safety in three hospitals, affiliated to Tehran University of Medical Sciences, based on the critical standards of Patient Safety Friendly Hospital Initiative (PSFHI. Materials and Methods:In this cross-sectional study, conducted in 2014, we used PSFHI assessment tool to evaluate the status of patient safety in three hospitals, affiliated to Tehran University of Medical Sciences; these general referral hospitals were selected purposefully. PSFHI assessment tool is comprised of 140 patient safety standards in five domains, categorized in 24 sub-domains. The five major domains include leadership and management, patient and public involvement, safe evidence-based clinical practices, safe environment, and lifelong learning. Results: All three hospitals met more than 70% of the critical standards. The highest score in critical standards (> 80% was related to the domain of leadership and management in all hospitals. The average score in the domain of safe evidence-based clinical practices was 70% in the studied hospitals. Finally, all the hospitals met 50% of the critical standards in the domains of patient and public involvement and safe environment. Conclusion: Based on the findings, PSFHI is a suitable program for meeting patient safety goals. The selected hospitals in this survey all had a high managerial commitment to patient safety; therefore, they could obtain high scores on critical standards.

Hanford Waste Vitrification Plant technical manual

Energy Technology Data Exchange (ETDEWEB)

Larson, D.E. [ed.; Watrous, R.A.; Kruger, O.L. [and others

1996-03-01

A key element of the Hanford waste management strategy is the construction of a new facility, the Hanford Waste Vitrification Plant (HWVP), to vitrify existing and future liquid high-level waste produced by defense activities at the Hanford Site. The HWVP mission is to vitrify pretreated waste in borosilicate glass, cast the glass into stainless steel canisters, and store the canisters at the Hanford Site until they are shipped to a federal geological repository. The HWVP Technical Manual (Manual) documents the technical bases of the current HWVP process and provides a physical description of the related equipment and the plant. The immediate purpose of the document is to provide the technical bases for preparation of project baseline documents that will be used to direct the Title 1 and Title 2 design by the A/E, Fluor. The content of the Manual is organized in the following manner. Chapter 1.0 contains the background and context within which the HWVP was designed. Chapter 2.0 describes the site, plant, equipment and supporting services and provides the context for application of the process information in the Manual. Chapter 3.0 provides plant feed and product requirements, which are primary process bases for plant operation. Chapter 4.0 summarizes the technology for each plant process. Chapter 5.0 describes the engineering principles for designing major types of HWVP equipment. Chapter 6.0 describes the general safety aspects of the plant and process to assist in safe and prudent facility operation. Chapter 7.0 includes a description of the waste form qualification program and data. Chapter 8.0 indicates the current status of quality assurance requirements for the Manual. The Appendices provide data that are too extensive to be placed in the main text, such as extensive tables and sets of figures. The Manual is a revision of the 1987 version.

Hanford Waste Vitrification Plant technical manual

International Nuclear Information System (INIS)

Larson, D.E.; Watrous, R.A.; Kruger, O.L.

1996-03-01

A key element of the Hanford waste management strategy is the construction of a new facility, the Hanford Waste Vitrification Plant (HWVP), to vitrify existing and future liquid high-level waste produced by defense activities at the Hanford Site. The HWVP mission is to vitrify pretreated waste in borosilicate glass, cast the glass into stainless steel canisters, and store the canisters at the Hanford Site until they are shipped to a federal geological repository. The HWVP Technical Manual (Manual) documents the technical bases of the current HWVP process and provides a physical description of the related equipment and the plant. The immediate purpose of the document is to provide the technical bases for preparation of project baseline documents that will be used to direct the Title 1 and Title 2 design by the A/E, Fluor. The content of the Manual is organized in the following manner. Chapter 1.0 contains the background and context within which the HWVP was designed. Chapter 2.0 describes the site, plant, equipment and supporting services and provides the context for application of the process information in the Manual. Chapter 3.0 provides plant feed and product requirements, which are primary process bases for plant operation. Chapter 4.0 summarizes the technology for each plant process. Chapter 5.0 describes the engineering principles for designing major types of HWVP equipment. Chapter 6.0 describes the general safety aspects of the plant and process to assist in safe and prudent facility operation. Chapter 7.0 includes a description of the waste form qualification program and data. Chapter 8.0 indicates the current status of quality assurance requirements for the Manual. The Appendices provide data that are too extensive to be placed in the main text, such as extensive tables and sets of figures. The Manual is a revision of the 1987 version

Operating Manual of Helium Refrigerator (Rev. 2)

Energy Technology Data Exchange (ETDEWEB)

Song, K.M.; Son, S.H.; Kim, K.S.; Lee, S.K.; Kim, M.S. [Korea Electric Power Research Institute, Taejon (Korea)

2002-07-01

A helium refrigerator was installed as a supplier of 20K cold helium to the cryogenic distillation system of WTRF pilot plant. The operating procedures of the helium refrigerator, helium compressor and auxiliary apparatus are described for the safety and efficient operation in this manual. The function of the helium refrigerator is to remove the impurities from the compressed helium of about 250psig, to cool down the helium from ambient temperature to 20K through the heat exchanger and expansion engine and to transfer the cold helium to the cryogenic distillation system. For the smoothly operation of helium refrigerator, the preparation, the start-up, the cool-down and the shut-down of the helium refrigerator are described in this operating manual. (author). 3 refs., 14 tabs.

ARDS User Manual

Science.gov (United States)

Fleming, David P.

2001-01-01

Personal computers (PCs) are now used extensively for engineering analysis. their capability exceeds that of mainframe computers of only a few years ago. Programs originally written for mainframes have been ported to PCs to make their use easier. One of these programs is ARDS (Analysis of Rotor Dynamic Systems) which was developed at Arizona State University (ASU) by Nelson et al. to quickly and accurately analyze rotor steady state and transient response using the method of component mode synthesis. The original ARDS program was ported to the PC in 1995. Several extensions were made at ASU to increase the capability of mainframe ARDS. These extensions have also been incorporated into the PC version of ARDS. Each mainframe extension had its own user manual generally covering only that extension. Thus to exploit the full capability of ARDS required a large set of user manuals. Moreover, necessary changes and enhancements for PC ARDS were undocumented. The present document is intended to remedy those problems by combining all pertinent information needed for the use of PC ARDS into one volume.

Health physics manual of good practices for accelerator facilities

International Nuclear Information System (INIS)

Casey, W.R.; Miller, A.J.; McCaslin, J.B.; Coulson, L.V.

1988-04-01

It is hoped that this manual will serve both as a teaching aid as well as a useful adjunct for program development. In the context of application, this manual addresses good practices that should be observed by management, staff, and designers since the achievement of a good radiation program indeed involves a combined effort. Ultimately, radiation safety and good work practices become the personal responsibility of the individual. The practices presented in this manual are not to be construed as mandatory rather they are to be used as appropriate for the specific case in the interest of radiation safety. As experience is accrued and new data obtained in the application of this document, ONS will update the guidance to assure that at any given time the guidance reflects optimum performance consistent with current technology and practice.The intent of this guide therefore is to: define common health physics problems at accelerators; recommend suitable methods of identifying, evaluating, and managing accelerator health physics problems; set out the established safety practices at DOE accelerators that have been arrived at by consensus and, where consensus has not yet been reached, give examples of safe practices; introduce the technical literature in the accelerator health physics field; and supplement the regulatory documents listed in Appendix D. Many accelerator health physics problems are no different than those at other kinds of facilities, e.g., ALARA philosophy, instrument calibration, etc. These problems are touched on very lightly or not at all. Similarly, this document does not cover other hazards such as electrical shock, toxic materials, etc. This does not in any way imply that these problems are not serious. 160 refs

Safety Precautions. Child Health and Safety Series (Module I).

Science.gov (United States)

Iscoe, Louise; And Others

This manual for parents and child care personnel in day care homes and centers provides guidelines and information on indoor and outdoor safety precautions, emergency preparation and first aid. Contents focus on monitoring arrivals and departures, prevention of suffocation and strangulation, control of pets and other animals, preventing and…

Building a capacity building manual

CSIR Research Space (South Africa)

Clinton, DD

2010-02-01

Full Text Available Organizations 2010 Building a capacity building manual Daniel D. Clinton, Jr., P.E., F.NSPE Chair, WFEO Capacity Building Committee Dr Andrew Cleland, FIPENZ, Chief Executive, IPENZ, NZ Eng David Botha, FSAICE, Executive Director, SAICE, SA Dawit... 2010 Tertiary level University curricula Coaches and mentors Facilities EXCeeD Remuneration of Academics Experiential training Outreach to Students Students chapters Young members forum World Federation of Engineering Organizations 2010 Post...

Sandia SWiFT Wind Turbine Manual.

Energy Technology Data Exchange (ETDEWEB)

White, Jonathan; LeBlanc, Bruce Philip; Berg, Jonathan Charles; Bryant, Joshua; Johnson, Wesley D.; Paquette, Joshua

2016-01-01

The Scaled Wind Farm Technology (SWiFT) facility, operated by Sandia National Laboratories for the U.S. Department of Energy's Wind and Water Power Program, is a wind energy research site with multiple wind turbines scaled for the experimental study of wake dynamics, advanced rotor development, turbine control, and advanced sensing for production-scale wind farms. The SWiFT site currently includes three variable-speed, pitch-regulated, three-bladed wind turbines. The six volumes of this manual provide a detailed description of the SWiFT wind turbines, including their operation and user interfaces, electrical and mechanical systems, assembly and commissioning procedures, and safety systems. Further dissemination only as authorized to U.S. Government agencies and their contractors; other requests shall be approved by the originating facility or higher DOE programmatic authority. 111 UNCLASSIFIED UNLIMITED RELEASE Sandia SWiFT Wind Turbine Manual (SAND2016-0746 ) approved by: Department Manager SWiFT Site Lead Dave Minster (6121) Date Jonathan White (6121) Date SWiFT Site Supervisor Dave Mitchell (6121) Date Note: Document revision logs are found after the title page of each volume of this manual. iv

Safety syringes and anti-needlestick devices in orthopaedic surgery.

Science.gov (United States)

Sibbitt, Wilmer L; Band, Philip A; Kettwich, Lawrence G; Sibbitt, Cristina R; Sibbitt, Lori J; Bankhurst, Arthur D

2011-09-07

The American Academy of Orthopaedic Surgery (AAOS), The Joint Commission, the Occupational Safety and Health Administration (OSHA), and the Needlestick Safety and Prevention Act encourage the integration of safety-engineered devices to prevent needlestick injuries to health-care workers and patients. We hypothesized that safety syringes and needles could be used in outpatient orthopaedic injection and aspiration procedures. The study investigated the orthopaedic uses and procedural idiosyncrasies of safety-engineered devices, including (1) four safety needles (Eclipse, SafetyGlide, SurGuard, and Magellan), (2) a mechanical safety syringe (RPD), (3) two automatic retractable syringes (Integra, VanishPoint), (4) three manual retractable syringes (Procedur-SF, Baksnap, Invirosnap), and (5) three shielded syringes (Safety-Lok, Monoject, and Digitally Activated Shielded [DAS] Syringe). The devices were first tested ex vivo, and then 1300 devices were used for 425 subjects undergoing outpatient arthrocentesis, intra-articular injections, local anesthesia, aspiration biopsy, and ultrasound-guided procedures. During the clinical observation, there were no accidental needlesticks (0 needlesticks per 1300 devices). Safety needles could be successfully used on a Luer syringe but were limited to ≤1.5 in (≤3.81 cm) in length and the shield could interfere with sonography. The mechanical safety syringes functioned well in all orthopaedic procedures. Automatic retractable syringes were too small for arthrocentesis of the knee, and the plunger blew out and prematurely collapsed with high-pressure injections. The manual retractable syringes and shielded syringes could be used with conventional needles for most orthopaedic procedures. The most effective and reliable safety devices for orthopaedic syringe procedures are shielded safety needles, mechanical syringes, manual retractable syringes, and shielded syringes, but not automatic retractable syringes. Even when adopting

Logic and discrete mathematics a concise introduction : solutions manual

CERN Document Server

Conradie, Willem; Robinson, Claudette

2015-01-01

Solutions manual to accompany Logic and Discrete Mathematics: A Concise Introduction This book features a unique combination of comprehensive coverage of logic with a solid exposition of the most important fields of discrete mathematics, presenting material that has been tested and refined by the authors in university courses taught over more than a decade. Written in a clear and reader-friendly style, each section ends with an extensive set of exercises, most of them provided with complete solutions which are available in this accompanying solutions manual.

Program Management System manual

International Nuclear Information System (INIS)

1986-01-01

The Program Management System (PMS), as detailed in this manual, consists of all the plans, policies, procedure, systems, and processes that, taken together, serve as a mechanism for managing the various subprograms and program elements in a cohesive, cost-effective manner. The PMS is consistent with the requirements of the Nuclear Waste Policy Act of 1982 and the ''Mission Plan for the Civilian Radioactive Waste Management Program'' (DOE/RW-0005). It is based on, but goes beyond, the Department of Energy (DOE) management policies and procedures applicable to all DOE programs by adapting these directives to the specific needs of the Civilian Radioactive Waste Management program. This PMS Manual describes the hierarchy of plans required to develop and maintain the cost, schedule, and technical baselines at the various organizational levels of the Civilian Radioactive Waste Management Program. It also establishes the management policies and procedures used in the implementation of the Program. These include requirements for internal reports, data, and other information; systems engineering management; regulatory compliance; safety; quality assurance; and institutional affairs. Although expanded versions of many of these plans, policies, and procedures are found in separate documents, they are an integral part of this manual. The PMS provides the basis for the effective management that is needed to ensure that the Civilian Radioactive Waste Management Program fulfills the mandate of the Nuclear Waste Policy Act of 1982. 5 figs., 2 tabs

Introduction to the Social Sciences: Teacher's Manual.

Science.gov (United States)

Blum, Mark E.; Spangehl, Stephen D.

A competency-based, introductory social science course for college students is described. Objectives of the manual are twofold--first, to present the complete set of materials which have served as the basis of a one semester social sciences course at the University of Louisville over three years, and, second, to offer suggestions regarding…

Safety Management System in Croatia Control Ltd.

OpenAIRE

Pavlin, Stanislav; Sorić, Vedran; Bilać, Dragan; Dimnik, Igor; Galić, Daniel

2009-01-01

International Civil Aviation Organization and other international aviation organizations regulate the safety in civil aviation. In the recent years the International Civil Aviation Organization has introduced the concept of the safety management system through several documents among which the most important is the 2006 Safety Management Manual. It treats the safety management system in all the segments of civil aviation, from carriers, aerodromes and air traffic control to design, constructi...

Quality assurance manual for the development of digital systems

International Nuclear Information System (INIS)

Lee, Cheol Kwon; Kwon, Kee Choon; You, Young Eun; Kim, Kwan Hyun; Park, Jung Woo; Park, Chan Seok

2001-12-01

A digital safety system is being developed by three companies under the Korea Nuclear I and C System R and D Program. This Quality Assurance Manual (QAM) is written to ensure the safety and reliability of the system and to meet the regulatory requirements associated with quality assurance. This QAM describes eighteen elements of quality assurance criteria required for the development of the system, which are coincident with the criteria specified in Nuclear Energy Laws and Enforcement Regulations of Nuclear Energy Laws and 10CFR50 Appendix B. This QAM is submitted to the regulatory body with other documents related to the quality assurance activities performed during the system development. And its safety, validity and fulfillment are reviewed and audited in the review process of topical report of the digital safety system

Safety Evaluation Report related to the renewal of the operating license for the research reactor at Purdue University: Docket No. 50-182

International Nuclear Information System (INIS)

1988-04-01

This Safety Evaluation Report for the application filed by Purdue University for a renewal of Operating License R-87 to continue to operate a research reactor has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is owned by Purdue University and is located on the campus in West Lafayette, Indiana. On the basis of its technical review, the staff concludes that the reactor facility can continue to be operated by the university without endangering the health and safety of the public or the enviroment

Status of School Safety and Security among Elementary Schools in the Fifth Class Municipality

Directory of Open Access Journals (Sweden)

Cresente E. Glariana

2015-12-01

Full Text Available This study attempted to determine the status of school safety and security in terms of the school sites, school playground, school canteen services, water safety, fire safety, campus security, building security, and sanitary facilities situation in eight (8 elementary schools in Libertad town. The descriptive survey was used to find out the status of school safety and security in the elementary schools of Libertad, Misamis Oriental. A checklist on the standards of facilities as implemented by the Department of Education was used to gather the data. Checklist was based from the 2010 Educational Facilities Manual. Evaluation based on the checklist showed that some of standards on 2010 Educational Facilities Manual were not observed. The schools have not complied with the requirements and specifications. The evaluation showed further that most of the schools did not comply within the standards set by the 2010 Educational Facilities Manual. School authorities may review the standards in the 2010 Educational Facilities Manual. The school should try to meet the standard to ensure safety and security of the pupils. Action plan may be prepared to be implemented in case of emergency.

Manual on Safety Aspects of the Design and Equipment of Hot Laboratories

International Nuclear Information System (INIS)

1969-01-01

With the development of atomic energy application and research, hot laboratories are now being constructed in a number of countries. The present publication describes and discusses experience in several countries in designing equipment for these laboratories. The safe handling of highly radioactive substances is the main purpose of hot laboratory design and equipment. The manual aims at helping those persons, particularly in the developing countries, who plan to design and construct a new hot laboratory or modify an existing one. It does not deal in great detail with the engineering design of protective and handling equipment; these matters can be found in the comprehensive list of references. The manual itself covers only basic ideas and different approaches in the design of laboratory building, hot cells, shielded and glove boxes, fume cupboards, and handling and viewing equipment. Systems for transferring materials and main services are also discussed.

A survey of the safety conditions of student housings: A case study in a type one university in Shiraz, Iran

Directory of Open Access Journals (Sweden)

Mehdi Jahangiri

2017-01-01

Full Text Available Objectives: This study aimed to investigate the extent of implementation of safety measures in 14 student housings in one of the largest universities in Fars province, Shiraz, Iran. Method: A cross-sectional study was conducted in 14 student housings of one of the largest universities, located in Shiraz, Iran. Audit checklists were completed and rated thought field inspection and interview. Safety Requirement Index (SRI was then used to evaluate the safety of student housings. SRI was graded on five scales (0-19%: very poor (unsafe; 20-39%: poor (relatively unsafe; 40-59%: moderate; 60-79%: good (relatively safe: and 80-100%: excellent (safe. Results: The mean SRI score was 71.01±15.46%. The highest and lowest level of SRI was 94.11±6.60% for dimensions of public health (and 47.70±18.42% for elevator safety. Conclusion: None of the studied housings was completely safe in all dimensions. Most of the studied housings were categorized as safe in the dimensions of public health and ventilation and air-conditioning systems; relatively safe in the dimensions of electrical, building, fire and kitchen safety; and moderate in the elevator safety and emergency response. Establishment of safety management system is necessary to promote safety in the studied housings. The results of this study indicated the need to inform the authorities about the safety priorities in housings, to promote the safety conditions. The results could also be used to raise awareness regarding their role and responsibilities about the safety of housings.

Surface Moisture Measurement System Operation and Maintenance Manual

International Nuclear Information System (INIS)

Ritter, G.A.; Pearce, K.L.; Stokes, T.L.

1995-12-01

This operations and maintenance manual addresses deployment, equipment and field hazards, operating instructions, calibration verification, removal, maintenance, and other pertinent information necessary to safely operate and store the Surface Moisture Measurement System (SMMS) and Liquid Observation Well Moisture Measurement System (LOWMMS). These systems were developed primarily in support of Tank Waste Remediation System (TWRS) Safety Programs for moisture measurement in organic and ferrocyanide watch list tanks

Occupational safety and health in the Universities: fulfilling the fundamental requirement of OSHA and AELA

International Nuclear Information System (INIS)

Ismail Bahari

2000-01-01

This paper discusses the result of a survey among the universities to looks at whether such basic similarities in requirements by both Acts actually help in fulfilling and integrating the fundamental requirement of OSHA, Malaysian Occupational Safety and Health Act and AELA, Malaysian Atomic Energy Licensing Act especially through self-regulation

A manual for local government financial management in Zambia

NARCIS (Netherlands)

A. Chitembo (Andrew)

2002-01-01

textabstractThis manual, supported by the School of the Built Environment at Copperbelt University and the Institute for Housing and Urban Development Studies, The Netherlands, aims to bring together various aspects of Public Finance covered in the various workshops and seminars conducted by SINPA.

Differences in participation based on self-esteem in power and manual wheelchair users on a university campus: a pilot study.

Science.gov (United States)

Rice, Ian M; Wong, Alex W K; Salentine, Benjamin A; Rice, Laura A

2015-03-01

To examine the relationship of self-esteem and wheelchair type with participation of young adult manual and power wheelchair users with diverse physical disabilities. Cross-sectional survey study. Large University Campus. A convenience sample of college students (N = 39) with self-reported physical disabilities who are full time wheelchair users (>40 per week) and are two or more years post illness or injury. Not applicable. The Rosenberg Self-Esteem Scale was used to measure self-esteem, and the Craig Handicap Assessment and Reporting Technique was used to measure participation. Self-esteem correlated highly with cognitive independence (CI) (r = 0.58), mobility (r = 0.67) and social integration (SI) (r = 0.52). Use of manual wheelchair was significantly related to higher levels of CI and mobility while longer use of any wheelchair (power or manual) was significantly associated with higher levels of mobility and SI. In addition higher self-esteem independently predicted a significant proportion of the variance in CI, mobility and SI, while type of wheelchair predicted a significant proportion of the variance in CI (p self-esteem was found to be the strongest predictor of participation in a population of young adults with mobility limitations. Better understanding of the factors influencing participation may help to facilitate new interventions to minimize the disparities between persons with disabilities and their able bodied peers. Implication for Rehabilitation A total of 46.8% of wheelchair users report the desire for increased community participant but face significant barriers. The type of wheelchair has been identified as having a large impact on participation. This study found self-esteem to be the strongest predictor of participation, which is notable because self-esteem is a characteristic that is potentially modifiable with treatment.

Safety evaluation report related to the renewal of the operating license for the University of New Mexico Research Reactor (Docket No. 50-252)

International Nuclear Information System (INIS)

1987-03-01

This Safety Evaluation Report for the application filed by the University of New Mexico (UNM) for renewal of Operating License No. R-102 to continue to operate its research reactor has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is located on the campus of the University of New Mexico in Albuquerque, New Mexico. The staff concludes that the reactor can continue to be operated by the University of New Mexico without endangering the health and safety of the public. 7 refs., 7 figs., 2 tabs

Student manual, Book 2: Orientation to occupational safety compliance in DOE

Energy Technology Data Exchange (ETDEWEB)

Colley, D.L.

1993-10-01

This is a student hand-book an Occupational Safety Compliance in DOE. Topics include the following: Electrical; materials handling & storage; inspection responsibilities & procedures; general environmental controls; confined space entry; lockout/tagout; office safety, ergonomics & human factors; medical & first aid, access to records; construction safety; injury/illness reporting system; and accident investigation procedures.

Auditors of the Managerial University: Neo-Liberal Business Advisers or Paternal Controllers?

Science.gov (United States)

Reid, Ian C.

2009-01-01

Universities are increasingly being seen as commercial enterprises, and are represented as particular types of business entities in manuals provided to university managers. Critical discourse analysis is employed in this paper to construct an analytical framework for the study of managerial advice, which is then used to examine the manual provided…

Building Fire Safety Audit at Faculty X, University of Indonesia, Year 2006

Directory of Open Access Journals (Sweden)

Fatma Lestari

2010-10-01

Full Text Available Fire may cause loss of life, material and valuable assets. The objective of this study is to conduct audit for fire safety and emergency response in the building at Faculty X, University of Indonesia, Depok. The audit results on the building fire safety facilities including emergency response and preparedness are then compared to the Building Code Australia (BCA and Indonesian regulation on the building fire safety (Kep.MenPU.No 10 and 11/KPTS/2000. The building selected are Building A, B, C, D, F and G. Building classification for A, B, D, F and G are classified as Class 5, while Building C is classified as Class 9b. Variable which are evaluated including emergency exit, building structure, fire alarm and detector, communication and fire warning system, evacuation procedure, portable fire extinguishers, hydrant, sprinkler, and emergency response preparedness. Results suggested that emergency exit is locked, and this is not comply to the regulation. Building structure has been complied to the regulation since it was made of concrete. Fire detector and alarm only provided in Building G, while other building is not available. There is no evacuation procedure available. Portable fire extinguisher has been available in all the building. Hydrant an sprinkler only available in building G. There is no emergency response preparedness in this faculty. In conclusion, the fire safety facilities in this faculty need to be improved.

Student manual, Book 2: Orientation to occupational safety compliance in DOE

International Nuclear Information System (INIS)

Colley, D.L.

1993-01-01

This is a student hand-book an Occupational Safety Compliance in DOE. Topics include the following: Electrical; materials handling ampersand storage; inspection responsibilities ampersand procedures; general environmental controls; confined space entry; lockout/tagout; office safety, ergonomics ampersand human factors; medical ampersand first aid, access to records; construction safety; injury/illness reporting system; and accident investigation procedures

Orientation to occupational safety compliance in DOE: Student manual, Book 1

International Nuclear Information System (INIS)

1993-01-01

The purpose of this document is to present Federal safety and health program requirements, provide an overview of DOE Safety and Health Programs, and to present information on the changes presently underway in the Department of Energy regarding safety and health. Public Law 91--596, Executive Order 12196,29 CFR 1960 and various related DOE Orders will be presented

Tritium radioluminescent devices, Health and Safety Manual

Energy Technology Data Exchange (ETDEWEB)

Traub, R.J.; Jensen, G.A.

1995-06-01

This document consolidates available information on the properties of tritium, including its environmental chemistry, its health physics, and safe practices in using tritium-activated RL lighting. It also summarizes relevant government regulations on RL lighting. Chapters are divided into a single-column part, which provides an overview of the topic for readers simply requiring guidance on the safety of tritium RL lighting, and a dual-column part for readers requiring more technical and detailed information.

Tritium radioluminescent devices, Health and Safety Manual

International Nuclear Information System (INIS)

Traub, R.J.; Jensen, G.A.

1995-06-01

This document consolidates available information on the properties of tritium, including its environmental chemistry, its health physics, and safe practices in using tritium-activated RL lighting. It also summarizes relevant government regulations on RL lighting. Chapters are divided into a single-column part, which provides an overview of the topic for readers simply requiring guidance on the safety of tritium RL lighting, and a dual-column part for readers requiring more technical and detailed information

Strong-back safety latch

International Nuclear Information System (INIS)

DeSantis, G.N.

1995-01-01

The calculation decides the integrity of the safety latch that will hold the strong-back to the pump during lifting. The safety latch will be welded to the strong-back and will latch to a 1.5-in. dia cantilever rod welded to the pump baseplate. The static and dynamic analysis shows that the safety latch will hold the strong-back to the pump if the friction clamps fail and the pump become free from the strong-back. Thus, the safety latch will meet the requirements of the Lifting and Rigging Manual for under the hook lifting for static loading; it can withstand shock loads from the strong-back falling 0.25 inch

TASS code topical report. V.1 TASS code technical manual

International Nuclear Information System (INIS)

Sim, Suk K.; Chang, W. P.; Kim, K. D.; Kim, H. C.; Yoon, H. Y.

1997-02-01

TASS 1.0 code has been developed at KAERI for the initial and reload non-LOCA safety analysis for the operating PWRs as well as the PWRs under construction in Korea. TASS code will replace various vendor's non-LOCA safety analysis codes currently used for the Westinghouse and ABB-CE type PWRs in Korea. This can be achieved through TASS code input modifications specific to each reactor type. The TASS code can be run interactively through the keyboard operation. A simimodular configuration used in developing the TASS code enables the user easily implement new models. TASS code has been programmed using FORTRAN77 which makes it easy to install and port for different computer environments. The TASS code can be utilized for the steady state simulation as well as the non-LOCA transient simulations such as power excursions, reactor coolant pump trips, load rejections, loss of feedwater, steam line breaks, steam generator tube ruptures, rod withdrawal and drop, and anticipated transients without scram (ATWS). The malfunctions of the control systems, components, operator actions and the transients caused by the malfunctions can be easily simulated using the TASS code. This technical report describes the TASS 1.0 code models including reactor thermal hydraulic, reactor core and control models. This TASS code models including reactor thermal hydraulic, reactor core and control models. This TASS code technical manual has been prepared as a part of the TASS code manual which includes TASS code user's manual and TASS code validation report, and will be submitted to the regulatory body as a TASS code topical report for a licensing non-LOCA safety analysis for the Westinghouse and ABB-CE type PWRs operating and under construction in Korea. (author). 42 refs., 29 tabs., 32 figs

Knowledge and attitude towards health and food safety among students of Tabriz University of Medical Sciences, Tabriz, Iran

Directory of Open Access Journals (Sweden)

Parvin Dehghan

2017-06-01

Full Text Available Introduction: Health and food safety is one of the most important issues of nutrition science. The present study aims to examine the knowledge and attitude towards health and food safety among students of Tabriz University of Medical Sciences, Tabriz, Iran. Methods: This study was conducted through cross-sectional approach on 300 students of Tabriz University of Medical Sciences who were selected through stratified random sampling method, using a validated and reliable researcher-made questionnaire. Data were analyzed by SPSS.Results: More than 50% of students had high attitude and knowledge towards health and food safety and washing hands before cooking. Further, more than 60% of students had low attitude on other related items such as unimportance of food additives in food safety. Besides, more than 50% of students had low knowledge about best temperature to store cooked food which is between 5 to 65 °C and the most appropriate plastic containers to keep food healthy. About 87.3% of students had good knowledge about diseases that could be transmitted through food. That there was a significant relationship between students' attitude and taking courses related to health and food safety (P = 0.010. There was also a significant relationship between students' knowledge and their college (P = 0.001 and major (P = 0.020. Conclusion: Results obtained revealed that students from some colleges and some majors had low knowledge of health and food safety. It is therefore necessary to hold training programs through workshops or to include courses in the curriculum of majors that lack such credits.

Nuclear safety chains

International Nuclear Information System (INIS)

Robbins, M.C.; Eames, G.F.; Mayell, J.R.

1981-01-01

An original scheme has been developed for expressing the complex interrelationships associated with the engineered safeguards provided for a nuclear power station. This management tool, based upon network diagrams called Nuclear Safety Chains, looks at the function required of a particular item of safety plant, defines all of the vital supplies and support features necessary for successful operation, and expresses them in visual form, to facilitate analysis and optimisation for operations and maintenance staff. The safety chains are confined to manual schemes at present, although they are designed to be compatible with modern computer techniques. Their usefulness with any routine maintenance planning application on high technology plant is already being appreciated. (author)

Manualization of Occupational Therapy Interventions: Illustrations from the Pressure Ulcer Prevention Research Program

Science.gov (United States)

Blanche, Erna Imperatore; Fogelberg, Donald; Diaz, Jesus; Carlson, Mike; Clark, Florence

2011-01-01

The manualization of a complex occupational therapy intervention is a crucial step in ensuring treatment fidelity for both clinical application and research purposes. Towards this latter end, intervention manuals are essential for assuring trustworthiness and replicability of randomized controlled trials (RCT’s) that aim to provide evidence of the effectiveness of occupational therapy. In this paper, literature on the process of intervention manualization is reviewed. The prescribed steps are then illustrated through our experience in implementing the University of Southern California/Rancho Los Amigos National Rehabilitation Center’s collaborative Pressure Ulcer Prevention Project (PUPP). In this research program, qualitative research provided the initial foundation for manualization of a multifaceted occupational therapy intervention designed to reduce incidence of medically serious pressure ulcers in people with SCI. PMID:22214116

Integration of a browser based operator manual in the system environment of a process computer system; Integration eines browserbasierten Betriebshandbuchs in die Systemumgebung einer Prozessrechneranlage

Energy Technology Data Exchange (ETDEWEB)

Weber, Andreas [Westinghouse Electric Germany GmbH (Germany); Erfle, Robert [DOSCO GmbH, Heidelberg (Germany); Feinkohl, Dirk [E.ON Kernkraft GmbH (Germany). Kernkraftwerk Unterweser

2012-11-01

The integration of a browser based operator manual in the system environment of a process computer system is an optimization of the operating procedure in the control room and a safety enhancement due to faster and error-free access to the manual contents. Several requirements by the authorities have to be fulfilled: the operating manual has to be available as hard copy, the format has to be true to original, protection against manipulation has to be provided, the manual content of the browser-based version and the hard copy have to identical, and the display presentation has to be consistent with ergonomic principals. The integration of the on-line manual in the surveillance process computer system provides the operator with the relevant comments to the surveillance signal. The described integration of the on-line manual is an optimization of the operator's everyday job with respect to ergonomics and safety (human performance).

Safety Evaluation Report related to the renewal of the operating license for the research reactor at Michigan State University (Docket No. 50-294)

International Nuclear Information System (INIS)

1984-08-01

This Safety Evaluation Report for the application filed by the Michigan State University (MSU) for a renewal of operating license number R-114 to continue to operate the TRIGA Mark I research reactor has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is owned and operated by the Michigan State University and is located on the campus of Michigan State University in East Lansing, Ingham County, Michigan. The staff concludes that the TRIGA reactor facility can continue to be operated by MSU without endangering the health and safety of the public

Safety Evaluation Report related to the construction permit and operating license for the research reactor at the University of Texas (Docket No. 50-602)

International Nuclear Information System (INIS)

1985-05-01

This Safety Evaluation Report for the application filed by the University of Texas for a construction permit and operating license to construct and operate a TRIGA research reactor has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is owned and operated by the University of Texas and is located at the university's Balcones Research Center, about 7 miles (11.6 km) north of the main campus in Austin, Texas. The staff concludes that the TRIGA reactor facility can be constructed and operated by the University of Texas without endangering the health and safety of the public

University of New Mexico short course in nuclear criticality safety: Training for new NCS [nuclear criticality safety] specialists

International Nuclear Information System (INIS)

Busch, R.D.

1990-01-01

Since 1973, the University of New Mexico (UNM) has given ten short courses in nuclear criticality safety (NCS). Generally, thee have been given every other year, although in 1989 it was decided to offer the course on an annual basis. This decision was primarily based on the large demand for NCS specialists and a large turnover rate in the industry. The purpose of the course is to provide a 1-week overview of NCS. The typical student has been involved in NCS for <1 yr, although it many cases they have been associated with the nuclear industry in other capacities for many years. The short course is conducted at several levels. Carefully prepared lectures provide the information framework for selected topics. The following topics are covered in the course: basic reactor theory, criticality accidents and consequences, hand calculations, administration of a criticality safety program, regulators and their processes, computer methods and applications, experimental methods and correlations, overview of some process operations, and transportation and storage issues in NCS

HORECA. Hoger onderwijs reactor elementary core analysis system. User's manual

International Nuclear Information System (INIS)

Battum, E. van; Serov, I.V.

1993-07-01

HORECA is developed at IRI Delft for quick analysis of power distribution, burnup and safety for the HOR. It can be used for the manual search of a better loading of the reactor. HORECA is based on the Penn State Fuel Management Package and uses the MCRAC code included in this package as a calculation engine. (orig./HP)

Safety evaluation report related to the renewal of the operating license for the University of Virginia open-pool research reactor. Docket No. 50-062

International Nuclear Information System (INIS)

1982-09-01

This Safety Evaluation Report for the application filed by the University of Virginia for a renewal of Operating Licence R-66 to continue to operate a research reactor has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is owned by the University of Virginia and is located on the campus in Charlottesville, Virginia. Based on its technical review, the staff concludes that the reactor facility can continue to be operated by the University without endangering the health and safety of the public or endangering the environment

Fire Safety Trianing in Health Care Institutions.

Science.gov (United States)

American Hospital Association, Chicago, IL.

The manual details the procedures to be followed in developing and implementing a fire safety plan. The three main steps are first, to organize; second, to set up a procedure and put it in writing; and third, to train and drill employees and staff. Step 1 involves organizing a safety committee, appointing a fire marshall, and seeking help from…

Safety-evaluation report related to the renewal of the operating license for the Cornell University TRIGA Research Reactor. Docket No. 50-157

International Nuclear Information System (INIS)

1983-08-01

This Safety Evaluation Report for the application filed by the Cornell University for a renewal of Operating License R-80 to continue to operate a research reactor has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is owned and operated by Cornell University and is located on the Cornell campus in Ithaca, New York. The staff concludes that the TRIGA reactor facility can continue to be operated by Cornell without endangering the health and safety of the public

Improving Quality and Occupational Safety on Automated Casting Lines

Directory of Open Access Journals (Sweden)

Kukla S.

2017-09-01

Full Text Available The paper presents a practical example of improving quality and occupational safety on automated casting lines. Working conditions on the line of box moulding with horizontal mould split were analysed due to low degree of automation at the stage of cores or filters installation as well as spheroidizing mortar dosing. A simulation analysis was carried out, which was related to the grounds of introducing an automatic mortar dispenser to the mould. To carry out the research, a simulation model of a line in universal Arena software for modelling and simulation of manufacturing systems by Rockwell Software Inc. was created. A simulation experiment was carried out on a model in order to determine basic parameters of the working system. Organization and working conditions in other sections of the line were also analysed, paying particular attention to quality, ergonomics and occupational safety. Ergonomics analysis was carried out on manual cores installation workplace and filters installation workplace, and changes to these workplaces were suggested in order to eliminate actions being unnecessary and onerous for employees.

Manual on laboratory testing for uranium ore processing

International Nuclear Information System (INIS)

1990-01-01

Laboratory testing of uranium ores is an essential step in the economic evaluation of uranium occurrences and in the development of a project for the production of uranium concentrates. Although these tests represent only a small proportion of the total cost of a project, their proper planning, execution and interpretation are of crucial importance. The main purposes of this manual are to discuss the objectives of metallurgical laboratory ore testing, to show the specific role of these tests in the development of a project, and to provide practical instructions for performing the tests and for interpreting their results. Guidelines on the design of a metallurgical laboratory, on the equipment required to perform the tests and on laboratory safety are also given. This manual is part of a series of Technical Reports on uranium ore processing being prepared by the IAEA's Division of Nuclear Fuel Cycle and Waste Management. A report on the Significance of Mineralogy in the Development of Flowsheets for Processing Uranium Ores (Technical Reports Series No. 196, 1980) and an instruction manual on Methods for the Estimation of Uranium Ore Reserves (No. 255, 1985) have already been published. 17 refs, 40 figs, 17 tabs

Cycling in the African American Community : safety training guidelines and findings.

Science.gov (United States)

2013-08-01

This report is a program users manual for the Cycling in the African American Community (CAAC) safety training intervention. The CAAC safety training intervention was designed to nudge more African Americans, who are often beginning cyclists...

STARS software tool for analysis of reliability and safety

International Nuclear Information System (INIS)

Poucet, A.; Guagnini, E.

1989-01-01

This paper reports on the STARS (Software Tool for the Analysis of Reliability and Safety) project aims at developing an integrated set of Computer Aided Reliability Analysis tools for the various tasks involved in systems safety and reliability analysis including hazard identification, qualitative analysis, logic model construction and evaluation. The expert system technology offers the most promising perspective for developing a Computer Aided Reliability Analysis tool. Combined with graphics and analysis capabilities, it can provide a natural engineering oriented environment for computer assisted reliability and safety modelling and analysis. For hazard identification and fault tree construction, a frame/rule based expert system is used, in which the deductive (goal driven) reasoning and the heuristic, applied during manual fault tree construction, is modelled. Expert system can explain their reasoning so that the analyst can become aware of the why and the how results are being obtained. Hence, the learning aspect involved in manual reliability and safety analysis can be maintained and improved

Radiological safety aspects of the operation of neutron generators

International Nuclear Information System (INIS)

Boggs, R.F.

1976-01-01

The purpose of the manual is to provide some basic guidelines to persons with a minimum of training in radiological health or health physics, on some safety aspects of the operation of sealed-tube and Cockcroft-Walton type neutron generators. The manual does not state rules or regulations but presents a description of the most likely hazards. It is relevant to those relatively compact neutron generators which usually operate at less than 150-200 kV for the purpose of producing 14-MeV neutrons. The scope is limited to basic discussions of hazards and measurement techniques. Separate chapters are devoted to the characteristics and use of neutron generators; radiation hazards and safety considerations; radiation monitoring and interpretation of measurements; and requirements for an effective safety programme. Two appendices deal with non-radiation hazards and safety considerations, and with a neutron generator laboratory, respectively. An extensive list of bibliographic references is included

Manual Vacuum Aspiration In The Management Of Post Abortal ...

African Journals Online (AJOL)

Eleven (11) patients with tetanus were managed by uterine evacuation using the manual vacuum aspiration at the University of Port Harcourt Teaching Hospital, Nigeria over a period of ten years. Eight (8) of the patients had uterine evacuation while in coma, while three (3) were conscious but had spasm and features of ...

AN AUTOMATED IMPLEMENTATION OF INDIAN UNIVERSITY ADMISSION SYSTEM USING ARTIFICIAL NEURAL NETWORKS

Directory of Open Access Journals (Sweden)

B. Sankarasubramanian

2014-04-01

Full Text Available Indian University Admission is a complex phenomenon encompassing various factors both tangible and intangible. Apart from Merit - Caste, Community and Religion play a crucial role in getting admission to various courses offered by Universities. The Single Window Admission System followed by almost all Government Universities (for example: Anna University, Chennai is, so far, the best practice to offer Admission sought by student community. But, still, in Private Universities, the Admission process is done manually since number of students seeking a course is smaller in size. This manual process is fraught with some drawbacks: such as slower in time, cumbersome and costlier, bias by the Admission Officer, manual errors while processing, due to influence exercised by powerful people qualified students not getting their course of choice and unqualified students getting into their course of willingness and etc. This paper addresses these problems via neural network architecture based Admission system which will eliminate all the pitfalls and drawbacks inherent in the current system and offers a smooth, clearer, easier and cost effective way of student admission system implementation in Indian Universities.

Radiation monitoring programme in a university hot laboratory

International Nuclear Information System (INIS)

Tillander, M.; Heinonen, O.J.

1979-01-01

The Department of Radiochemistry in the University of Helsinki is the only institute teaching radiochemistry at the university level in Finland. The research programme of the Deparment must therefore include the uses of radiation and radionuclides in many branches of science. The students must receive adequate instruction in radiation protection for safe work in laboratories. This also has the educational benefit that the radiochemists will subsequently be able to observe the necessary safety precautions when employing ionizing radiation professionally. The Department of Radiochemistry consists of the following laboratories: a radiotracer laboratory, a neutron/electron and a gamma irradiation laboratory, an environmental low activity level laboratory, a whole-body counting laboratory, a reactor chemistry laboratory and a waste-treatment facility. The radiation protection organization of the Department is presented. Various methods of monitoring, including advantages and disadvantages are discussed. Emphasis is placed on the reactor chemistry laboratory where transuranic elements are utilized. These elements are highly radiotoxic and their monitoring in most cases requires destructive analysis. Different methods of determining external and internal doses are evaluated with regard to sensitivity and accuracy. Detection limits for radionuclides utilized in the laboratory are presented for different measurement systems, including non-destructive monitoring, spectrometry after chemical analysis, liquid scintillation counting and low-energy gamma spectrometry using a CsI-NaI scintillation detector. The guidelines laid down in the IAEA Safety Series Manuals are discussed in the light of practical experience. (author)

Safety evaluation report related to the renewal of the operating license for the Washington State University TRIGA reactor. Docket No. 50-27

International Nuclear Information System (INIS)

1982-05-01

This Safety Evaluation Report for the application filed by the Washington State University (WSU) for a renewal of operating license number R-76 to continue to operate a research reactor has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is owned and operated by the Washington State University and is located on the WSU campus in Pullman, Whitman County, Washington. The staff concludes that the TRIGA reactor facility can continue to be operated by WSU without endangering the health and safety of the public

Safety Evaluation Report related to renewal of the operating license for the CAVALIER Training Reactor at the University of Virginia (Docket No. 50-396)

International Nuclear Information System (INIS)

1985-05-01

This Safety Evaluation Report for the application filed by the University of Virginia for a renewal of Operating License R-123 to continue to operate the CAVALIER (Cooperatively Assembled Virginia Low Intensity Educational Reactor) has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is owned and operated by the University of Virginia and is located on the campus in Charlottesville, Virginia. Based on its technical review, the staff concludes that the reactor facility can continue to be operated by the university without endangering the health and safety of the public or the environment

Environmental contamination by cyclophosphamide preparation: Comparison of conventional manual production in biological safety cabinet and robot-assisted production by APOTECAchemo.

Science.gov (United States)

Schierl, Rudolf; Masini, Carla; Groeneveld, Svenja; Fischer, Elke; Böhlandt, Antje; Rosini, Valeria; Paolucci, Demis

2016-02-01

The aim of this study was to compare environmental contamination of cyclophosphamide (CP) during 1 week of drug compounding by conventional manual procedure in a biological safety cabinet (BSC) with laminar airflow and a new robotic drug preparation system (APOTECAchemo). During four consecutive days, similar numbers of infusion bags with cyclophosphamide were prepared with both techniques in a cross-over design. Wipe samples (49 for BSC, 50 for APOTECAchemo) were taken at several locations (gloves, infusion bags, trays, BSC-benches, floor) in the pharmacy and analyzed for CP concentrations by GC-MSMS (LOD 0.2 ng/sample). The detection rate was 70% in the BSC versus 15% in APOTECAchemo. During manual preparation of admixtures using BSC contamination with CP was below 0.001 ng/cm(2) at most locations, but significant on gloves (0.0004-0.0967 ng/cm(2)) and the majority (70%) of infusion bags (preparation by APOTECAchemo, gloves (1 of 8: 0.0007 ng/cm(2)) and infusion bags (3 of 20: 0.0005, 0.0019, 0.0094 ng/cm(2)) were considerably less contaminated. Residual contamination was found on the surfaces under the dosing device in the compounding area (0.0293-0.1603 ng/cm(2)) inside the robotic system. Compared to outcomes of other studies, our results underline good manufacturing procedures in this pharmacy with low contamination for both techniques (BSC and APOTECAchemo). Comparison of both preparation procedures validated that contamination of infusion bags was much lower by using the robotic system. © The Author(s) 2014.

Laboratory training manual on radioimmunoassay in animal reproduction

International Nuclear Information System (INIS)

1984-01-01

Reproduction must always be regarded as one of the major limiting factors in animal production and many of the modern methods for improving reproduction rely heavily on the ability to measure hormone levels in blood and milk. This has produced a world-wide demand for laboratory facilities to carry out hormone assays and the need for specialist training to allow these assays to be undertaken. The need to measure nanogram and picogram quantities and the use of radionuclides require a good deal of skill and care and this Manual has been prepared to aid training and provide the sort of information that rarely appears in scientific papers. It represents a further step in the Joint FAO/IAEA Division's series of Laboratory Training Manuals, and has been designed to aid training programmes of the type carried out during the Joint FAO/IAEA Interregional Training Course on Radioimmunoassay and its Application in Research on Animal Reproduction at Cornell University in July 1982. Many of the laboratory exercises described in this Manual are based on those conducted during the course

New control and safety rod unit for the training reactor of the Dresden Technical University

International Nuclear Information System (INIS)

Adam, E.; Schab, J.; Knorr, J.

1983-01-01

The extension of the experimental training of students at the training reactor AKR of the Dresden Technical University requires the reconstruction of the reactor with a new control and safety rod unit. The specific conditions at the AKR led to a new variant. Results of preliminary experiments, design and mode of operation of the first unit as well as hitherto gained operation experiences are presented. (author)

Safety analysis report 231-Z Building

Energy Technology Data Exchange (ETDEWEB)

Powers, C.S.

1989-03-01

This report provides an intensive review of the nuclear safety of the operation of the 231-Z Building. For background information complete descriptions of the floor plan, building services, alarm systems, and glove box systems are included in this report. In addition, references are included to The Plutonium Laboratory Radiation Work Procedures, Safety Guides, 231-Z Operating Procedures Manual and Nuclear Materials accountability Procedures. Engineered and administrative features contribute to the overall safety of personnel, the building, and environs. The consequences of credible incidents were considered and are discussed.

Food safety knowledge of undergraduate students at a Canadian university: results of an online survey

Directory of Open Access Journals (Sweden)

Sarah M. Courtney

2016-11-01

Full Text Available Abstract Background Foodborne diseases are an important public health issue, and young adults are an important demographic to target with food safety education. Our objective was to assess the food safety knowledge of undergraduate students at a Canadian university, to identify potential areas for such education. Methods In February 2015, we conducted an online survey of 485 undergraduate students at a university in Ontario, Canada. We assessed various food-related factors, including cooking frequency and prior food handling or preparation education. We then modeled the relationship between ‘overall knowledge score’ and the demographic and food skills/cooking experience predictors using multivariable log-binomial regression, to determine factors associated with relatively higher proportions of correct responses. Results Respondents were, on average, 20.5 years old, and the majority (64.8 % lived off campus. Students cooked from basic ingredients infrequently, with 3 in 4 doing so a few times a year to never. Students averaged 6.2 correct answers to the 11 knowledge questions. Adjusting for other important covariates, older age and being a current food handler were associated with relatively higher knowledge, whereas working/volunteering in a hospital and infrequent cooking were associated with relatively lower knowledge. Males in the Faculty of Science had relatively higher knowledge than females in the Faculty of Science, both of whom had relatively higher knowledge than all students in other Faculties. Among students who had never taken a food preparation course, knowledge increased with self-reported cooking ability; however, among students who had taken such a course, knowledge was highest among those with low self-reported cooking ability. Conclusions Consistent with other similar studies, students in Faculties outside of the Faculty of Science, younger students, and those who cook infrequently could benefit from food safety education

Food safety knowledge of undergraduate students at a Canadian university: results of an online survey.

Science.gov (United States)

Courtney, Sarah M; Majowicz, Shannon E; Dubin, Joel A

2016-11-09

Foodborne diseases are an important public health issue, and young adults are an important demographic to target with food safety education. Our objective was to assess the food safety knowledge of undergraduate students at a Canadian university, to identify potential areas for such education. In February 2015, we conducted an online survey of 485 undergraduate students at a university in Ontario, Canada. We assessed various food-related factors, including cooking frequency and prior food handling or preparation education. We then modeled the relationship between 'overall knowledge score' and the demographic and food skills/cooking experience predictors using multivariable log-binomial regression, to determine factors associated with relatively higher proportions of correct responses. Respondents were, on average, 20.5 years old, and the majority (64.8 %) lived off campus. Students cooked from basic ingredients infrequently, with 3 in 4 doing so a few times a year to never. Students averaged 6.2 correct answers to the 11 knowledge questions. Adjusting for other important covariates, older age and being a current food handler were associated with relatively higher knowledge, whereas working/volunteering in a hospital and infrequent cooking were associated with relatively lower knowledge. Males in the Faculty of Science had relatively higher knowledge than females in the Faculty of Science, both of whom had relatively higher knowledge than all students in other Faculties. Among students who had never taken a food preparation course, knowledge increased with self-reported cooking ability; however, among students who had taken such a course, knowledge was highest among those with low self-reported cooking ability. Consistent with other similar studies, students in Faculties outside of the Faculty of Science, younger students, and those who cook infrequently could benefit from food safety education. Supporting improved hand hygiene, in particular clarifying hand

The Alaska Commercial Fisheries Water Quality Sampling Methods and Procedures Manual

Energy Technology Data Exchange (ETDEWEB)

Folley, G.; Pearson, L.; Crosby, C. [Alaska Dept. of Environmental Conservation, Soldotna, AK (United States); DeCola, E.; Robertson, T. [Nuka Research and Planning Group, Seldovia, AK (United States)

2006-07-01

A comprehensive water quality sampling program was conducted in response to the oil spill that occurred when the M/V Selendang Ayu ship ran aground near a major fishing port at Unalaska Island, Alaska in December 2004. In particular, the sampling program focused on the threat of spilled oil to the local commercial fisheries resources. Spill scientists were unable to confidently model the movement of oil away from the wreck because of limited oceanographic data. In order to determine which fish species were at risk of oil contamination, a real-time assessment of how and where the oil was moving was needed, because the wreck became a continual source of oil release for several weeks after the initial grounding. The newly developed methods and procedures used to detect whole oil during the sampling program will be presented in the Alaska Commercial Fisheries Water Quality Sampling Methods and Procedures Manual which is currently under development. The purpose of the manual is to provide instructions to spill managers while they try to determine where spilled oil has or has not been encountered. The manual will include a meaningful data set that can be analyzed in real time to assess oil movement and concentration. Sections on oil properties and processes will be included along with scientific water quality sampling methods for whole and dissolved phase oil to assess potential contamination of commercial fishery resources and gear in Alaska waters during an oil spill. The manual will present a general discussion of factors that should be considered when designing a sampling program after a spill. In order to implement Alaska's improved seafood safety measures, the spatial scope of spilled oil must be known. A water quality sampling program can provide state and federal fishery managers and food safety inspectors with important information as they identify at-risk fisheries. 11 refs., 7 figs.

Manual Therapy

OpenAIRE

Hakgüder, Aral; Kokino, Siranuş

2002-01-01

Manual therapy has been used in the treatment of pain and dysfunction of spinal and peripheral joints for more than a hundred years. Manual medicine includes manipulation, mobilization, and postisometric relaxation techniques. The aim of manual therapy is to enhance restricted movement caused by blockage of joints keeping postural balance, restore function and maintain optimal body mechanics. Anatomic, biomechanical, and neurophysiological evaluations of the leucomotor system is essential for...

Design/CPN. A Reference Manual

DEFF Research Database (Denmark)

Jensen et. al, Kurt

/CPN WWW pages. To speed up the access to the Design/CPN manuals we recommend to keep a local copy - which may be shared by all users in your organisation. In this way you do not need to go via our WWW server each time you need to look in a manual. For some of the largest manuals, we also supply files......Note: The manuals are available as PDF files . There are two sets of manuals - one for the Unix platform and another for the Mac platform. Each set of manual consists of: Tutorial (for the Design/CPN editor and simulator) Reference Manual (for the Design/CPN editor and simulator) Programmer......'s Manual (with Design/OA functions and Charts) Occurrence Graph Manual (integrated tutorial and reference manual) OE/OS Graph Manual (integrated tutorial and reference manual) Other Manuals (e.g. a short overview of CPN ML).   The Tutorial, Reference Manual and Programmer's Manual are made for Design...

Ergonomic Interventions in Manual Handling of Carpets to the retail sellers in a textile company

Directory of Open Access Journals (Sweden)

E. Darvishi

2015-04-01

.Conclusion: By implementing ergonomics interventions in carpet delivery sites, the risk factors of MSDs, induced by manual carpet handling, were reduced and safety and ergonomic conditions of the retailers were improved, compared to the previous conditions.

CTF Theory Manual

Energy Technology Data Exchange (ETDEWEB)

Avramova, Maria N. [Pennsylvania State Univ., University Park, PA (United States); Salko, Robert K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2016-05-25

Coolant-Boiling in Rod Arrays|Two Fluids (COBRA-TF) is a thermal/ hydraulic (T/H) simulation code designed for light water reactor (LWR) vessel analysis. It uses a two-fluid, three-field (i.e. fluid film, fluid drops, and vapor) modeling approach. Both sub-channel and 3D Cartesian forms of 9 conservation equations are available for LWR modeling. The code was originally developed by Pacific Northwest Laboratory in 1980 and had been used and modified by several institutions over the last few decades. COBRA-TF also found use at the Pennsylvania State University (PSU) by the Reactor Dynamics and Fuel Management Group (RDFMG) and has been improved, updated, and subsequently re-branded as CTF. As part of the improvement process, it was necessary to generate sufficient documentation for the open-source code which had lacked such material upon being adopted by RDFMG. This document serves mainly as a theory manual for CTF, detailing the many two-phase heat transfer, drag, and important accident scenario models contained in the code as well as the numerical solution process utilized. Coding of the models is also discussed, all with consideration for updates that have been made when transitioning from COBRA-TF to CTF. Further documentation outside of this manual is also available at RDFMG which focus on code input deck generation and source code global variable and module listings.

Prospective Nonrandomized Trial of Manual Compression and Angio-Seal and Starclose Arterial Closure Devices in Common Femoral Punctures

International Nuclear Information System (INIS)

Ratnam, Lakshmi A.; Raja, Jowad; Munneke, Graham J.; Morgan, Robert A.; Belli, Anna-Maria

2007-01-01

We compared the use of manual compression and Angio-Seal and Starclose arterial closure devices to achieve hemostasis following common femoral artery (CFA) punctures in order to evaluate safety and efficacy. A prospective nonrandomized, single-center study was carried out on all patients undergoing CFA punctures over 1 year. Hemostasis was achieved using manual compression in 108 cases, Angio-Seal in 167 cases, and Starclose in 151 cases. Device-failure rates were low and not significantly different in the two groups (manual compression and closure devices; p = 0.8). There were significantly more Starclose (11.9%) patients compared to Angio-Seal (2.4%), with successful initial deployment subsequently requiring additional manual compression to achieve hemostasis (p < 0.0001). A significant number of very thin patients failed to achieve hemostasis (p = 0.014). Major complications were seen in 2.9% of Angio-Seal, 1.9% of Starclose, and 3.7% of manual compression patients, with no significant difference demonstrated; 4.7% of the major complications were seen in female patients compared to 1.3% in males (p = 0.0415). All three methods showed comparable safety and efficacy. Very thin patients are more likely to have failed hemostasis with the Starclose device, although this did not translate into an increased complication rate. There is a significant increased risk of major puncture-site complications in women with peripheral vascular disease

Safety Evaluation Report related to the renewal of the operating license for the training and research reactor at the University of Lowell (Docket No. 50-223)

International Nuclear Information System (INIS)

1985-11-01

This Safety Evaluation Report for the application filed by the University of Lowell (UL) for renewal of operating license number R-125 to continue to operate its research reactor has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is located on the North Campus of the University of Lowell in Lowell, Massachusetts. The staff concludes that the reactor can continue to be operated by the University of Lowell without endangering the health and safety of the public

Caltrans : construction manual

Science.gov (United States)

2009-08-01

Caltrans intends this manual as a resource for all personnel engaged in contract administration. The manual establishes policies and procedures for the construction phase of Caltrans projects. However, this manual is not a contract document. It impos...

Exploring older adults’ perceptions of a patient-centered education manual for hip fracture recovery: “everything in one place”

Directory of Open Access Journals (Sweden)

Tsui K

2015-11-01

Full Text Available Karen Tsui,1,2,* Lena Fleig,1,3,4,* Dolores P Langford,2,5 Pierre Guy,1,2,6 Valerie MacDonald,7,8 Maureen C Ashe1,31Centre for Hip Health and Mobility, The University of British Columbia, 2Vancouver Coastal Health, 3Department of Family Practice, The University of British Columbia, Vancouver, BC, Canada; 4Health Psychology, Freie Universität Berlin, Berlin, Germany; 5Department of Physical Therapy, The University of British Columbia, 6Department of Orthopaedics, 7School of Nursing, The University of British Columbia, Vancouver, 8Fraser Health Authority, Surrey, BC, Canada*These authors contributed equally to this workPurpose: To describe older adults’ perspectives on a new patient education manual for the recovery process after hip fracture.Materials and methods: The Fracture Recovery for Seniors at Home (FReSH Start manual is an evidence-based manual for older adults with fall-related hip fracture. The manual aims to support the transition from hospital to home by facilitating self-management of the recovery process. We enrolled 31 community-dwelling older adults with previous fall-related hip fracture and one family member. We collected data using a telephone-based questionnaire with eight five-point Likert items and four semi-structured open-ended questions to explore participants’ perceptions on the structure, content, and illustration of the manual. The questionnaire also asked participants to rate the overall utility (out of 10 points and length of the manual. We used content analysis to describe main themes from responses to the open-ended interview questions.Results: Participants’ ratings for structure, content, and illustrations ranged from 4 to 5 (agree to highly agree, and the median usefulness rating was 9 (10th percentile: 7, 90th percentile: 10. Main themes from the content analysis included: ease of use and presentation; health literacy; illustration utility; health care team delivery; general impression, information

78 FR 17212 - Patient Safety Organizations: Voluntary Relinquishment From Universal Safety Solution PSO

Science.gov (United States)

2013-03-20

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety... Research and Quality (AHRQ), HHS. ACTION: Notice of delisting. SUMMARY: The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act), Public Law 109-41, 42 U.S.C. 299b-21--b-26, provides for the...

Proposed quality assurance manual for the Office of Waste Isolation

International Nuclear Information System (INIS)

1977-01-01

The manual provides guidelines for assuring safe and reliable siting, design, procurement and construction, operation, and decommissioning of a radioactive waste repository. The organization of the program is given and the program itself is defined. The program includes the site evaluation, site selection, design, procurement, fabrication, installation, and testing of any system or component that is safety related. It also included all necessary documentation and auditing

Systematic safety evaluation of old nuclear power plants

International Nuclear Information System (INIS)

Dredemis, G.; Fourest, B.

1984-01-01

The French safety authorities have undertaken a systematic evaluation of the safety of old nuclear power plants. Apart from a complete revision of safety documents (safety analysis report, general operating rules, incident and accident procedures, internal emergency plan, quality organisation manual), this examination consisted of analysing the operating experience of systems frequently challenged and a systematic examination of the safety-related systems. This paper is based on an exercise at the Ardennes Nuclear Power Plant which has been in operation for 15 years. This paper also summarizes the main surveys and modifications relating to this power plant. (orig.)

MELCOR computer code manuals

Energy Technology Data Exchange (ETDEWEB)

Summers, R.M.; Cole, R.K. Jr.; Smith, R.C.; Stuart, D.S.; Thompson, S.L. [Sandia National Labs., Albuquerque, NM (United States); Hodge, S.A.; Hyman, C.R.; Sanders, R.L. [Oak Ridge National Lab., TN (United States)

1995-03-01

MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. MELCOR is being developed at Sandia National Laboratories for the U.S. Nuclear Regulatory Commission as a second-generation plant risk assessment tool and the successor to the Source Term Code Package. A broad spectrum of severe accident phenomena in both boiling and pressurized water reactors is treated in MELCOR in a unified framework. These include: thermal-hydraulic response in the reactor coolant system, reactor cavity, containment, and confinement buildings; core heatup, degradation, and relocation; core-concrete attack; hydrogen production, transport, and combustion; fission product release and transport; and the impact of engineered safety features on thermal-hydraulic and radionuclide behavior. Current uses of MELCOR include estimation of severe accident source terms and their sensitivities and uncertainties in a variety of applications. This publication of the MELCOR computer code manuals corresponds to MELCOR 1.8.3, released to users in August, 1994. Volume 1 contains a primer that describes MELCOR`s phenomenological scope, organization (by package), and documentation. The remainder of Volume 1 contains the MELCOR Users Guides, which provide the input instructions and guidelines for each package. Volume 2 contains the MELCOR Reference Manuals, which describe the phenomenological models that have been implemented in each package.

MELCOR computer code manuals

International Nuclear Information System (INIS)

Summers, R.M.; Cole, R.K. Jr.; Smith, R.C.; Stuart, D.S.; Thompson, S.L.; Hodge, S.A.; Hyman, C.R.; Sanders, R.L.

1995-03-01

MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. MELCOR is being developed at Sandia National Laboratories for the U.S. Nuclear Regulatory Commission as a second-generation plant risk assessment tool and the successor to the Source Term Code Package. A broad spectrum of severe accident phenomena in both boiling and pressurized water reactors is treated in MELCOR in a unified framework. These include: thermal-hydraulic response in the reactor coolant system, reactor cavity, containment, and confinement buildings; core heatup, degradation, and relocation; core-concrete attack; hydrogen production, transport, and combustion; fission product release and transport; and the impact of engineered safety features on thermal-hydraulic and radionuclide behavior. Current uses of MELCOR include estimation of severe accident source terms and their sensitivities and uncertainties in a variety of applications. This publication of the MELCOR computer code manuals corresponds to MELCOR 1.8.3, released to users in August, 1994. Volume 1 contains a primer that describes MELCOR's phenomenological scope, organization (by package), and documentation. The remainder of Volume 1 contains the MELCOR Users Guides, which provide the input instructions and guidelines for each package. Volume 2 contains the MELCOR Reference Manuals, which describe the phenomenological models that have been implemented in each package

Iowa Commercial Pesticide Applicator Manual, Category 1C: Agricultural Crop Disease Control. CS-11.

Science.gov (United States)

Nyvall, Robert F.; Ryan, Stephen O.

This manual provides information needed to meet specific standards for certification as a pesticide applicator. It summarizes the economically important diseases of field and forage crops such as corn, soybeans and alfalfa. Special attention is given to pesticide application methods and safety. (CS)

Safety evaluation report related to the renewal of the operating license for the Zero-Power Reactor at Cornell University, Docket No. 50-97

International Nuclear Information System (INIS)

1983-09-01

This Safety Evaluation Report for the application filed by Cornell University (CU) for a renewal of Operating License R-80 to continue to operate a zero-power reactor (ZPR) has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is owned and operated by Cornell University and is located on the Cornell campus in Ithaca, New York. The staff concludes that the ZPR facility can continue to be operated by CU without endangering the health and safety of the public

Assessment of Safety Condition in One of the Teaching Hospitals in Kermanshah (2015: A Case Study

Directory of Open Access Journals (Sweden)

Masod Ghanbari Kakavand

2016-09-01

Full Text Available Background & Aims of the Study: Many working conditions-related stress factors that can produce injuries and illnesses are important in hospital environments. So, the health and safety of nurses and patients from workplace-induced injuries and illnesses is important. In this study, we have assessed the safety condition of one of the teaching hospitals in Kermanshah (2015. Materials and Methods: This descriptive and cross-sectional study was conducted in one of the teaching hospital of Kermanshah University of medical sciences. For this aim a checklist was prepared based on the Occupational Safety and Health Administration's standards and Part 3 of the manual of National Building Regulations. These checklists comprised (The final checklist had 239 questions of 9 dimensions various sections of safety including; fire safety, building safety, electrical safety, emergency exit routes safety, heating and cooling equipment safety, operating room and laundry room and salty home safety. Eventually, using SPSS 16 and descriptive statistics, data were analyzed. Results: According to the results of this study, 66.6% of the units had poor safety and 33.4% of them were moderately safe. As well as, only ICU and CCU unit, heating and cooling equipment and operational room showed moderate compliance with safety requirements and other sections were poorly complied. Conclusion: The results of this study showed that safety conditions of hospital were not at favorable level. These poor safety statues can jeopardize patients and hospital personnel. Thus some interventions such as improvement of working conditions, compliance with safety acts and implementation of health, safety and environmental management system would be necessary.

Safety Evaluation Report related to the renewal of the operating license for the training and research reactor at the University of Michigan (Docket No. 50-2)

International Nuclear Information System (INIS)

1985-07-01

This Safety Evaluation Report for the application filed by the University of Michigan (UM) for renewal of the Ford Nuclear Reactor (FNR) operating license number R-28 to continue to operate its research reactor has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is located on the North Campus of the University of Michigan in Ann Arbor, Michigan. The staff concludes that the reactor can continue to be operated by the University of Michigan without endangering the health and safety of the public

How compliant are beverage employees to occupational health and safety regulations?

Directory of Open Access Journals (Sweden)

L. Chetty

2009-01-01

Full Text Available This observational study was undertaken to identify thehealth and safety violations of employees at a specific beverage manufac-turing company.  A  site inspection and observation of all employees employedat this specific beverage company was conducted by the researcher over 2 days. Employees were observed for 12 hours per day with the morningshift on Day 1 and the afternoon shift on Day 2. A  sample of conveniencewas used in that every employee who was present on those days was included. Descriptive statistics were used to analyze the data set. There were a total of 212 employees and 332 behaviours observed during thisstudy period. Unsafe handling and behaviour was observed in 55% of observations. Incorrect manual lifting techniques was the most frequent health and safety violation observed. In the 48 manual lifting behaviours observed, correct practice was observed in only three cases.  It is clear thatmore healthcare education and practical training is required in the area of manual lifting techniques. It is clear that more practical training is required in the area of manual handling.

Tools to prevent process safety events at university research facility - chemical risk assessment and experimental set-up risk assessment

DEFF Research Database (Denmark)

Jensen, Niels; Jørgensen, Sten Bay

2014-01-01

The article discusses the two forms developed to examine the hazards of the chemicals to be used in the experiments in the experimental setup in the Department of Chemical and Biochemical Engineering of the Technical University of Denmark. A system for the safety assessment of new experimental se...... setups in university research and teaching laboratories is presented. The significance of the forms for the effort of researchers in improving work with significant hazards is described....

Information Manual: Procedures, Planning Concepts, Subsystems. ABS Publication No. 3.

Science.gov (United States)

California Univ., Berkeley.

This report, the third in a series which presents the results of a systems analysis of the problem of providing science and engineering buildings at the university level, is a technical manual for using the Academic Building Systems (ABS) approach in programing, designing, and constructing such facilities. The document presents (1) planning…

Nuclear materials facility safety initiative

International Nuclear Information System (INIS)

Peddicord, K.L.; Nelson, P.; Roundhill, M.; Jardine, L.J.; Lazarev, L.; Moshkov, M.; Khromov, V.V.; Kruchkov, E.; Bolyatko, V.; Kazanskij, Yu.; Vorobeva, I.; Lash, T.R.; Newton, D.; Harris, B.

2000-01-01

Safety in any facility in the nuclear fuel cycle is a fundamental goal. However, it is recognized that, for example, should an accident occur in either the U.S. or Russia, the results could seriously delay joint activities to store and disposition weapons fissile materials in both countries. To address this, plans are underway jointly to develop a nuclear materials facility safety initiative. The focus of the initiative would be to share expertise which would lead in improvements in safety and safe practices in the nuclear fuel cycle.The program has two components. The first is a lab-to-lab initiative. The second involves university-to-university collaboration.The lab-to-lab and university-to-university programs will contribute to increased safety in facilities dealing with nuclear materials and related processes. These programs will support important bilateral initiatives, develop the next generation of scientists and engineers which will deal with these challenges, and foster the development of a safety culture

The computer code Eurdyn - 1 M. (Release 1) Part 2: User's Manual

International Nuclear Information System (INIS)

Donea, J.; Giuliani, S.

1979-01-01

This report is the user's manual for the computer code Eurdyn-1 M developed at the J.R.C. Ispra for use in containment and fuel subassembly analyses for fast reactor safety studies. The input data are defined and a test problem is presented to illustrate both the input and the output of results

Operational safety and reactor life improvements of Kyoto University Reactor

International Nuclear Information System (INIS)

Utsuro, M.; Fujita, Y.; Nishihara, H.

1990-01-01

Recent important experience in improving the operational safety and life of a reactor are described. The Kyoto University Reactor (KUR) is a 25-year-old 5 MW light water reactor provided with two thermal columns of graphite and heavy water as well as other kinds of experimental facilities. In the graphite thermal column, noticeable amounts of neutron irradiation effects had accumulated in the graphite blocks near the core. Before the possible release of the stored energy, all the graphite blocks in the column were successfully replaced with new blocks using the opportunity provided by the installation of a liquid deuterium cold neutron source in the column. At the same time, special seal mechanisms were provided for essential improvements to the problem of radioactive argon production in the column. In the heavy-water thermal column we have accomplished the successful repair of a slow leak of heavy water through a thin instrumentation tube failure. The repair work included the removal and reconstructions of the lead and graphite shielding layers and welding of the instrumentation tube under radiation fields. Several mechanical components in the reactor cooling system were also exchanged for new components with improved designs and materials. On-line data logging of almost all instrumentation signals is continuously performed with a high speed data analysis system to diagnose operational conditions of the reactor. Furthermore, through detailed investigations on critical components, operational safety during further extended reactor life will be supported by well scheduled maintenance programs

CSTEM User Manual

Science.gov (United States)

Hartle, M.; McKnight, R. L.

2000-01-01

This manual is a combination of a user manual, theory manual, and programmer manual. The reader is assumed to have some previous exposure to the finite element method. This manual is written with the idea that the CSTEM (Coupled Structural Thermal Electromagnetic-Computer Code) user needs to have a basic understanding of what the code is actually doing in order to properly use the code. For that reason, the underlying theory and methods used in the code are described to a basic level of detail. The manual gives an overview of the CSTEM code: how the code came into existence, a basic description of what the code does, and the order in which it happens (a flowchart). Appendices provide a listing and very brief description of every file used by the CSTEM code, including the type of file it is, what routine regularly accesses the file, and what routine opens the file, as well as special features included in CSTEM.

TAP 1, Training Program Manual

International Nuclear Information System (INIS)

1991-01-01

Training programs at DOE nuclear facilities should provide well-trained, qualified personnel to safely and efficiently operate the facilities in accordance with DOE requirements. A need has been identified for guidance regarding analysis, design, development, implementation, and evaluation of consistent and reliable performance-based training programs. Accreditation of training programs at Category A reactors and high-hazard and selected moderate-hazard nonreactor nuclear facilities will assure consistent, appropriate, and cost-effective training of personnel responsible for the operation, maintenance, and technical support of these facilities. Training programs that are designed and based on systematically determined job requirements, instead of subjective estimation of trainee needs, yield training activities that are consistent and develop or improve knowledge, skills, and abilities that can be directly related to the work setting. Because the training is job-related, the content of these programs more efficiently meets the needs of the employee. Besides a better trained work force, a greater level of operational reactor safety can be realized. This manual is intended to provide an overview of the accreditation process and a brief description of the elements necessary to construct and maintain training programs that are based on the requirements of the job. Two companion manuals provide additional information to assist contractors in their efforts to accredit training programs

Criteria for safety-related operator actions

International Nuclear Information System (INIS)

Gray, L.H.; Haas, P.M.

1983-01-01

The Safety-Related Operator Actions (SROA) Program was designed to provide information and data for use by NRC in assessing the performance of nuclear power plant (NPP) control room operators in responding to abnormal/emergency events. The primary effort involved collection and assessment of data from simulator training exercises and from historical records of abnormal/emergency events that have occurred in operating plants (field data). These data can be used to develop criteria for acceptability of the use of manual operator action for safety-related functions. Development of criteria for safety-related operator actions are considered

Why most Brand Manuals fail when it comes to defining Brand Colors

DEFF Research Database (Denmark)

Abildgaard, Michael

2016-01-01

From top class Universities and governmental organizations to high-end global brands and well-known local brands, a surprising consistency of inattentiveness has been published in these compa-nies’ prestigious Brand Manuals and Brand Guides. When it comes to providing technical guidance, defining...

Manual for guided home exercises for osteoarthritis of the knee

Directory of Open Access Journals (Sweden)

Nilza Aparecida de Almeida Carvalho

2010-06-01

Full Text Available INTRODUCTION: Physiotherapy is one of the most important components of therapy for osteoarthritis of the knee. The objective of this prospective case series was to assess the efficiency of a guidance manual for patients with osteoarthritis of the knee in relation to pain, range of movement , muscle strength and function, active goniometry, manual strength test and function. METHODS: Thirty-eight adults with osteoarthritis of the knee (> 45 years old who were referred to the physiotherapy service at the university hospital (Santa Casa de Misericórdia de São Paulo were studied. Patients received guidance for the practice of specific physical exercises and a manual with instructions on how to perform the exercises at home. They were evaluated for pain, range of movement, muscle strength and function. These evaluations were performed before they received the manual and three months later. Patients were seen monthly regarding improvements in their exercising abilities. RESULTS: The program was effective for improving muscle strength, controlling pain, maintaining range of movement of the knee joint, and reducing functional incapacity. DISCUSSION: A review of the literature showed that there are numerous clinical benefits to the regular practice of physical therapy exercises by patients with osteoarthritis of the knee(s in a program with appropriate guidance. This study shows that this guidance can be attained at home with the use of a proper manual. CONCLUSIONS: Even when performed at home without constant supervision, the use of the printed manual for orientation makes the exercises for osteoarthritis of the knee beneficial.

EMSL Operations Manual

Energy Technology Data Exchange (ETDEWEB)

Foster, Nancy S.

2009-06-18

This manual is a general resource tool to assist EMSL users and Laboratory staff within EMSL locate official policy, practice and subject matter experts. It is not intended to replace or amend any formal Battelle policy or practice. Users of this manual should rely only on Battelle’s Standard Based Management System (SBMS) for official policy. No contractual commitment or right of any kind is created by this manual. Battelle management reserves the right to alter, change, or delete any information contained within this manual without prior notice.

EMSL Operations Manual

Energy Technology Data Exchange (ETDEWEB)

Foster, Nancy S.

2009-03-25

This manual is a general resource tool to assist EMSL users and Laboratory staff within EMSL locate official policy, practice and subject matter experts. It is not intended to replace or amend any formal Battelle policy or practice. Users of this manual should rely only on Battelle’s Standard Based Management System (SBMS) for official policy. No contractual commitment or right of any kind is created by this manual. Battelle management reserves the right to alter, change, or delete any information contained within this manual without prior notice.

Knowledge of Health Volunteers in the Damavand District on Food Safety: A Study Based on the World Health Organization Manual

Directory of Open Access Journals (Sweden)

M Ghfari

2016-09-01

Full Text Available Introduction: Food borne illnesses are usually infectious or toxic in nature and caused by bacteria, viruses, parasites or chemical substances entering the body through contaminated food or water. Unsafe food causes more than 200 diseases - ranging from diarrhea to cancers. Food safety is a public health priority. The aim of present study was determine level of health communicators' knowledge about food safety in Damavand city that was performed according to the World Health Organization guide. Methods: This study is a descriptive analysis of the target a group of health Volunteers in Damavand depended to Shahid Beheshti University of Medical Sciences. 109 persons were enrolled with s awareness, scarification and consent of the census. Tools for data collection was a questionnaire consisting of 13 questions on demographic characteristics and 24 questions about food safety according to WHO’s guide. Data was analyzed with SPSS-18 software and statistical analysis includes one-way ANOVA, t-test and spearman correlation. Results: The mean age of participant was 44.75 ± 9.98 years. Average score of awareness of food safety was 35.87 ±6.22 and for awareness was 77 (71%. No significant relationships was observed between of awareness and marital status, age, education, occupation and education of wife was not significant relationships (p>0/05. Conclusion: In some safety food items the level of knowledge in some safety food items was good, in other one, such as food storage, transmission of microbes, cooking temperature for meat there was low awareness. In this respect, information, education programs to raise awareness of the health status for health volunteers is recommended

Guidance Manual for preparing Nuclear and Radiological Emergency Preparedness and Response Plan

Energy Technology Data Exchange (ETDEWEB)

Muhammed, Kabiru [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Jeong, Seung-Young [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2014-10-15

The Nuclear and Radiological Emergency Preparedness and Response Plan(NREPRP) describes the capabilities, responsibilities and authorities of government agencies and a conceptual basis for integrating the activities of these agencies to protect public health and safety. The NREPRP addresses issues related to actual or perceived radiation hazard requiring a national response in order to: i. Provide co-ordination of a response involving multi-jurisdictions or significant national responsibilities; or ii. Provide national support to state and local governments. The objective of this research is to establish Guidance Manual for preparing a timely, organized and coordinated emergency response plan for Authorities/agencies to promptly and adequately determine and take actions to protect members of the public and emergency workers. The manual will not provide sufficient details for an adequate response. This level of details is contained in standard operating procedures that are being developed based on the plan developed. Base on the data obtain from integrated planning levels and responsibility sharing, the legal document of major government agencies participating in NREPRP form the legal basis for the response plan. Also the following documents should be some international legal binding documents. Base on the international safety requirement and some countries well developed NREPRP, we have drafted a guidance manual for new comer countries for easy development of their countries NREPRP. Also we have taken in to consideration lessons learn from most accident especially Fukushima accident.

Guidance Manual for preparing Nuclear and Radiological Emergency Preparedness and Response Plan

International Nuclear Information System (INIS)

Muhammed, Kabiru; Jeong, Seung-Young

2014-01-01

The Nuclear and Radiological Emergency Preparedness and Response Plan(NREPRP) describes the capabilities, responsibilities and authorities of government agencies and a conceptual basis for integrating the activities of these agencies to protect public health and safety. The NREPRP addresses issues related to actual or perceived radiation hazard requiring a national response in order to: i. Provide co-ordination of a response involving multi-jurisdictions or significant national responsibilities; or ii. Provide national support to state and local governments. The objective of this research is to establish Guidance Manual for preparing a timely, organized and coordinated emergency response plan for Authorities/agencies to promptly and adequately determine and take actions to protect members of the public and emergency workers. The manual will not provide sufficient details for an adequate response. This level of details is contained in standard operating procedures that are being developed based on the plan developed. Base on the data obtain from integrated planning levels and responsibility sharing, the legal document of major government agencies participating in NREPRP form the legal basis for the response plan. Also the following documents should be some international legal binding documents. Base on the international safety requirement and some countries well developed NREPRP, we have drafted a guidance manual for new comer countries for easy development of their countries NREPRP. Also we have taken in to consideration lessons learn from most accident especially Fukushima accident

User manual for Blossom statistical package for R

Science.gov (United States)

Talbert, Marian; Cade, Brian S.

2005-01-01

Blossom is an R package with functions for making statistical comparisons with distance-function based permutation tests developed by P.W. Mielke, Jr. and colleagues at Colorado State University (Mielke and Berry, 2001) and for testing parameters estimated in linear models with permutation procedures developed by B. S. Cade and colleagues at the Fort Collins Science Center, U.S. Geological Survey. This manual is intended to provide identical documentation of the statistical methods and interpretations as the manual by Cade and Richards (2005) does for the original Fortran program, but with changes made with respect to command inputs and outputs to reflect the new implementation as a package for R (R Development Core Team, 2012). This implementation in R has allowed for numerous improvements not supported by the Cade and Richards (2005) Fortran implementation, including use of categorical predictor variables in most routines.

Radiological survey activities: uranium mill tailings remedial action project procedures manual

International Nuclear Information System (INIS)

Little, C.A.; Berven, B.A.; Carter, T.E.

1986-07-01

The US Department of Energy (DOE) was assigned the responsibility for conducting remedial action at 24 sites, which are located in one eastern and nine western states. The DOE's responsibilities are being met through its Uranium Mill Tailings Remedial Action Project Office (UMTRA-PO) in Albuquerque, New Mexico. The purpose of this Procedures Manual is to provide a standardized set of procedures that document in an auditable manner the activities performed by the Radiological Survey Activities (RASA) group in the Dosimetry and Biophysical Transport Section (DABTS) of the Health and Safety Research Division (HASRD) at the Oak Ridge National Laboratory (ORNL), in its role as the Inclusion Survey Contractor (ISC). Members of the RASA group assigned to the UMTRA Project are headquartered in the ORNL/RASA office in Grand Junction, Colorado, and report to the ORNL/RASA Project Manager. The Procedures Manual ensures that the organizational, administrative, and technical activities of the RASA/UMTRA group conform properly to those of the ISC as described in the Vicinity Properties Management and Implementation Manual and the Summary Protocol. This manual also ensures that the techniques and procedures used by the RASA/UMTRA group and contractor personnel meet the requirements of applicable governmental, scientific, and industrial standards

Safety Evaluation Report related to the renewal of the operating license for the TRIGA training and research reactor at the University of Arizona (Docket No. 50-113)

International Nuclear Information System (INIS)

1990-05-01

This Safety Evaluation Report for the application filed by the University of Arizona for the renewal of Operating License R-52 to continue operating its research reactor at an increased operating power level has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is located on the University of Arizona campus in Tucson, Arizona. The staff concludes that the reactor can continue to be operated by the University of Arizona without endangering the health and safety of the public. 20 refs., 8 figs., 5 tabs

Energy Research and Development Administration, Division of Safety, Standards, and Compliance respirator manual

International Nuclear Information System (INIS)

Douglas, D.D.; Hack, A.L.; Held, B.J.; Revoir, W.H.

1976-05-01

The manual has been prepared to provide technical information for contractors of the Energy Research and Development Administration (ERDA) on the application of respiratory protective devices for protection against airborne contaminants, both radioactive and nonradioactive. The various elements of a respirator program including selection and maintenance of equipment and training of personnel are described to assist in establishing adequate programs

Energy Research and Development Administration, Division of Safety, Standards, and Compliance respirator manual

Energy Technology Data Exchange (ETDEWEB)

Douglas, D.D.; Hack, A.L.; Held, B.J.; Revoir, W.H.

1976-05-01

The manual has been prepared to provide technical information for contractors of the Energy Research and Development Administration (ERDA) on the application of respiratory protective devices for protection against airborne contaminants, both radioactive and nonradioactive. The various elements of a respirator program including selection and maintenance of equipment and training of personnel are described to assist in establishing adequate programs.

INTRA/Mod3.2. Manual and code description. Volume 2 - User's manual

International Nuclear Information System (INIS)

Andersson, Jenny; Edlund, O.; Hermann, J.; Johansson, Lise-Lotte

1999-01-01

The INTRA Manual consists of two volumes. Volume I of the manual is a thorough description of the code INTRA, the physical modelling of INTRA and the ruling numerics, and volume II, the User's Manual is an input description. This document, the User's Manual, Volume II, contains a detailed description of how to use INTRA, how to set up an input file, how to run INTRA and also post-processing

Documentation of Hanford Site independent review of the Hanford Waste Vitrification Plant Preliminary Safety Analysis Report

International Nuclear Information System (INIS)

Herborn, D.I.

1993-11-01

Westinghouse Hanford Company (WHC) is the Integrating Contractor for the Hanford Waste Vitrification Plant (HWVP) Project, and as such is responsible for preparation of the HWVP Preliminary Safety Analysis Report (PSAR). The HWVP PSAR was prepared pursuant to the requirements for safety analyses contained in US Department of Energy (DOE) Orders 4700.1, Project Management System (DOE 1987); 5480.5, Safety of Nuclear Facilities (DOE 1986a); 5481.lB, Safety Analysis and Review System (DOE 1986b) which was superseded by DOE order 5480-23, Nuclear Safety Analysis Reports, for nuclear facilities effective April 30, 1992 (DOE 1992); and 6430.lA, General Design Criteria (DOE 1989). The WHC procedures that, in large part, implement these DOE requirements are contained in WHC-CM-4-46, Nonreactor Facility Safety Analysis Manual. This manual describes the overall WHC safety analysis process in terms of requirements for safety analyses, responsibilities of the various contributing organizations, and required reviews and approvals

Safety evaluation report related to the renewal of the operating license for the research reactor at the University of Florida. Docket No. 50-83

International Nuclear Information System (INIS)

1982-05-01

This Safety Evaluation Report for the application filed by the University of Florida (UF) for a renewal of Operating License R-56 to continue to operate its Argonaut-type research reactor has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is owned and operated by the University of Florida and is located on the UF campus in Gainesville, Alachua County, Florida. The staff concludes that the reactor facility can continue to be operated by UF without endangering the health and safety of the public

Study Process Questionnaire Manual. Student Approaches to Learning and Studying.

Science.gov (United States)

Biggs, John B.

This manual describes the theory behind the Study Process Questionnaire (SPQ) and explains what the subscale and scale scores mean. The SPQ is a 42-item self-report questionnaire used in Australia to assess the extent to which a tertiary student at a college or university endorses different approaches to learning and the motives and strategies…

Structures manual

Science.gov (United States)

2001-01-01

This manual was written as a guide for use by design personnel in the Vermont Agency of Transportation Structures Section. This manual covers the design responsibilities of the Section. It does not cover other functions that are a part of the Structu...

Ciencias 2. Manual do Professor (Science Teacher's Manual).

Science.gov (United States)

Raposo, Lucilia

This is the teacher's manual for Ciencias 2, the second in a series of elementary science textbooks for Portuguese-speaking students. The student textbook contains 10 chapters and 57 activities. The teacher's manual presents an explanation of the educational goals and the organization of the content, Topics included are environment, the human,…

Manually Classifying User Search Queries on an Academic Library Web Site

Science.gov (United States)

Chapman, Suzanne; Desai, Shevon; Hagedorn, Kat; Varnum, Ken; Mishra, Sonali; Piacentine, Julie

2013-01-01

The University of Michigan Library wanted to learn more about the kinds of searches its users were conducting through the "one search" search box on the Library Web site. Library staff conducted two investigations. A preliminary investigation in 2011 involved the manual review of the 100 most frequently occurring queries conducted…

Radiological Control Manual

Energy Technology Data Exchange (ETDEWEB)

1993-04-01

This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records.

Radiological Control Manual

International Nuclear Information System (INIS)

1993-04-01

This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records

Egyptian Mythological Manuals

DEFF Research Database (Denmark)

Jørgensen, Jens Kristoffer Blach

From the hands of Greek mythographers a great number of myths have survived along with philosophical discussions of their meaning and relevance for the Greeks. It is little known that something similar existed in ancient Egypt where temple libraries and archives held scholarly literature used...... by the native priesthood, much of which has only been published in recent years. As part of this corpus of texts, the ancient Egyptian mythological manuals offer a unique perspective on how the Egyptian priesthood structured and interpreted Egyptian myths. The thesis looks at the different interpretative...... techniques used in the Tebtunis Mythological Manual (Second century CE) and the Mythological Manual of the Delta (Sixth century BCE) and the place of these manuals within the larger corpus of priestly scholarly literature from ancient Egypt. To organize the wealth of local myths the manuals use model...

Manual on brachytherapy. Incorporating: Applications guide, procedures guide, basics guide

International Nuclear Information System (INIS)

1996-01-01

This publication is part of practical radiation safety manual series for different fields of application aimed primarily at persons handling radiation sources on a daily routine basis, which could at same time be used by the competent authorities, supporting their efforts in the radiation protection training of workers or medical assistance personnel or helping on-site management to set up local radiation protection rules. It is dedicated to brachytherapy: its application and procedures guides

The environmental survey manual: Appendices E, F, G, H, I, J, and K

International Nuclear Information System (INIS)

1987-08-01

Appendices E, F, G, H, I, J and K of the Environmental Survey Manual address the following topics: Field Sampling Protocols and Guidance; Guidelines for Preparation of Quality Assurance Plans; Decontamination Guidance; Data Management and Analysis; Sample and Document Management; Health and Safety Guidance for Sampling and Analysis Teams; Documents for Sampling and Analysis Program

The relationship between manual handling performance and recent flying experience in air transport pilots.

Science.gov (United States)

Ebbatson, Matt; Harris, Don; Huddlestone, John; Sears, Rodney

2010-02-01

Modern jet transport aircraft are typically flown using the on-board automation by the pilot programming commands into the auto-flight systems. Anecdotal evidence exists suggesting that pilots of highly automated aircraft experience manual flying skills decay as a result of a lack of opportunity to practise hand-flying during line operations. The ability of a pilot to revert to basic manual control is essential, for example, in cases where the aircraft's automatic capability is diminished or when reconfiguring the automatics is an ineffective use of crew capacity. However, there is a paucity of objective data to substantiate this perceived threat to flight safety. Furthermore, traditional performance measurement techniques may lack the ability to identify subtle but significant differences in pilots' manual handling ability in large transport aircraft. This study examines the relationship between pilot manual handling performance and their recent flying experience using both traditional flight path tracking measures and frequency-based control strategy measures. Significant relationships are identified between pilots' very recent flying experience and their manual control strategy. Statement of Relevance: The study demonstrates a novel application of frequency analysis, which produces a broader and more sensitive analysis of pilot performance than has been offered in previous research. Additionally, the relationships that are found to exist between recent flying experience and manual flying performance will help to guide future pilot assessment and training.

Safety-evaluation report related to renewal of the operating license for the Texas A and M University Research Reactor. Docket No. 50-128, License R-83

International Nuclear Information System (INIS)

1983-03-01

This Safety Evaluation Report for the application filed by the Texas A and M University (Texas A and M) for a renewal of operating license number R-83 to continue to operate a research reactor has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is owned and operated by the Texas Engineering and Experiment Station of the Texas A and M University and is located on the campus in College Station, Brazos County, Texas. The staff concludes that the TRIGA reactor facility can continue to be operated by Texas A and M University without endangering the health and safety of the public

Electronic Commerce user manual

Energy Technology Data Exchange (ETDEWEB)

1992-04-10

This User Manual supports the Electronic Commerce Standard System. The Electronic Commerce Standard System is being developed for the Department of Defense of the Technology Information Systems Program at the Lawrence Livermore National Laboratory, operated by the University of California for the Department of Energy. The Electronic Commerce Standard System, or EC as it is known, provides the capability for organizations to conduct business electronically instead of through paper transactions. Electronic Commerce and Computer Aided Acquisition and Logistics Support, are two major projects under the DoD`s Corporate Information Management program, whose objective is to make DoD business transactions faster and less costly by using computer networks instead of paper forms and postage. EC runs on computers that use the UNIX operating system and provides a standard set of applications and tools that are bound together by a common command and menu system. These applications and tools may vary according to the requirements of the customer or location and may be customized to meet the specific needs of an organization. Local applications can be integrated into the menu system under the Special Databases & Applications option on the EC main menu. These local applications will be documented in the appendices of this manual. This integration capability provides users with a common environment of standard and customized applications.

Electronic Commerce user manual

Energy Technology Data Exchange (ETDEWEB)

1992-04-10

This User Manual supports the Electronic Commerce Standard System. The Electronic Commerce Standard System is being developed for the Department of Defense of the Technology Information Systems Program at the Lawrence Livermore National Laboratory, operated by the University of California for the Department of Energy. The Electronic Commerce Standard System, or EC as it is known, provides the capability for organizations to conduct business electronically instead of through paper transactions. Electronic Commerce and Computer Aided Acquisition and Logistics Support, are two major projects under the DoD's Corporate Information Management program, whose objective is to make DoD business transactions faster and less costly by using computer networks instead of paper forms and postage. EC runs on computers that use the UNIX operating system and provides a standard set of applications and tools that are bound together by a common command and menu system. These applications and tools may vary according to the requirements of the customer or location and may be customized to meet the specific needs of an organization. Local applications can be integrated into the menu system under the Special Databases Applications option on the EC main menu. These local applications will be documented in the appendices of this manual. This integration capability provides users with a common environment of standard and customized applications.

Food Safety Awareness and Opinions of the Nursing and Medical Students at Gaziantep University

Directory of Open Access Journals (Sweden)

Gulendam Karadag

2012-08-01

Full Text Available AIM: Food safety is defined as the prevention of any decay or contamination in food substances until they are ready for consumption. Foodborne diseases are a growing public health problem. Our research was conducted as a descriptive study to determine the food awareness and associated opinions of the students at the Faculty of Medicine and the Nursing Department of the Faculty of Medical Sciences at Gaziantep University. METHOD: The research was conducted with the students at the Faculty of Medicine and the Nursing Department of the Faculty of Medical Sciences at Gaziantep University between 8 March and 26 March 2010 and with 175 students who accepted to participate in the research. Verbal consent was obtained from the students before the initiation of the research. Data were collected by the researchers by face-to-face interview technique and by using a questionnaire of 20 questions which was prepared after a review of literature. Collected data were evaluated by using chi-square and student t-test analysis assessed by SPSS 11.0 program. RESULTS: Approximately 62.9% of the students were between 18-20 years of age. It was determined that 56.0% of the students were interested in food safety, 50.9% did not think that the food they consumed was safe, 41.7% paid attention to brand and nutrition values and whether the food is organic when they do food shopping. All students considered safety as a crucial factor in food consumption (100%, 60.0% paid attention to nutrition values, 58.3% paid attention to the expiry date and 41.8% paid attention to the brand on the package of food substances while shopping. Most of the students responded to the statement “food additives are carcinogen” as “yes” (70.9%; while 66.3% of the students responded as “I have no idea” to the statement “Additives with code E are not harmful to health”, and 55.4% of the students responded as “No” to the statement “all additives are harmful to human health�

Radiopharmaceuticals and hospital radiopharmacy practices: course manual for accreditation/certification of hospital radiopharmacists

International Nuclear Information System (INIS)

Ramamoorthy, N.; Shivarudrappa, V.; Bhelose, Amita A.

2000-02-01

This manual on hospital radiopharmaceuticals and hospital radiopharmacy practices contains information and recommendations that could be of use to hospital radiopharmacists while the main focus of the book is to impart adequate exposure to basics of radiopharmaceuticals and purity and safety aspects of formulations to be made in hospital radiopharmacy. Papers relevant to INIS are indexed separately

Safety Evaluation Report related to the renewal of the operating license for the research reactor at the University of Kansas (Docket No. 50-148)

International Nuclear Information System (INIS)

1984-05-01

This Safety Evaluation Report for the application filed by the University of Kansas (KU) for a renewal of Operating License R-78 to continue to operate the KU 250-kW open-pool training reactor has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is owned and operated by the University of Kansas and is located on the KU campus in Lawrence, Douglas County, Kansas. The staff concludes that the reactor facility can continue to be operated by KU without endangering the health and safety of the public. 17 references, 11 figures, 4 tables

Evaluation of Safety and Security by Using the Fuzzy Logic Methods in Islamic Azad University, Branch of Lahijan

Directory of Open Access Journals (Sweden)

Hedyeh Rastkar Komachali

2017-05-01

Full Text Available Safety assumes a critical part in the utilization of spots. Various spots can create issues in respect to people’s impression of safety. A few parameters influence the view of security and various scientists have dug into these parameters. In any case, large portions of these parameters are quantitative and hard to break down utilizing ordinary expository strategies. This paper at first recognizes the parameters that influence safety by utilizing a survey. These parameters incorporate the components of light, crowdedness, and scene. A short time later, these parameters are measured in three places inside the Islamic Azad University, Lahijan branch. An assessment of the security of these spots in view of the fluffy rationale framework takes after. Finally, we watched that after effects of the fluffy rationale examination demonstrated generous concurrence with the survey discoveries.

Influence of safeguards and fire protection on criticality safety

International Nuclear Information System (INIS)

Six, D.E.

1980-01-01

There are several positive influences of safeguards and fire protection on criticality safety. Experts in each discipline must be aware of regulations and requirements of the others and work together to ensure a fault-tree design. EG and G Idaho, Inc., routinely uses an Occupancy-Use Readiness Manual to consider all aspects of criticality safety, fire protection, and safeguards. The use of the analytical tree is described

Proceedings of the eighth European annual conference on human decision making and manual control

International Nuclear Information System (INIS)

Lind, M.; Hollnagel, E.

1989-01-01

The papers contributed at the eighth European annual conference on human decision making and manual control cover the subject areas of vehicle control, robotics, modeling, operator support and cognitive engineering, artificial intelligence and neural network. Some of the papers are relevant to power plant control and in this respect to nuclear safety. (AB)

Tank farm health and safety plan. Revision 2

International Nuclear Information System (INIS)

Mickle, G.D.

1995-01-01

This Tank Farm Health and Safety Plan (HASP) for the conduct of all operations and work activities at the Hanford Site 200 Area Tank Farms is provided in order to minimize health and safety risks to workers and other onsite personnel. The HASP accomplishes this objective by establishing requirements, providing general guidelines, and conveying farm and facility-specific hazard communication information. The HASP, in conjunction with the job-specific information required by the HASP, is provided also as a reference for use during the planning of work activities at the tank farms. This HASP applies to Westinghouse Hanford Company (WHC), other prime contractors to the U.S. Department of Energy (DOE), and subcontractors to WHC who may be involved in tank farm work activities. This plan is intended to be both a requirements document and a useful reference to aid tank farm workers in understanding the safety and health issues that are encountered in routine and nonroutine work activities. The HASP defines the health and safety responsibilities of personnel working at the tank farms. It has been prepared in recognition of and is consistent with National Institute of Safety and Health (NIOSH), and Occupational Safety and Health Administration (OSHA)/Unlimited State Coast Guard (USCG)/U.S. Environmental Protection Agency (EPA), Occupational Safety and Health Guidance Manual for Hazardous Waste Site Activities (NIOSH 1985); WHC-CM-4-3, Industrial Safety Manual, Volume 4, open-quotes Health and Safety Programs for Hazardous Waste Operations;close quotes 29 CFR 1910.120, Hazardous Waste Operations and Emergency Response; WHC-CM-1-1, Management Policies; and WHC-CM-1-3, Management Requirements and Procedures. When differences in governing regulations or policies exist, the more stringent requirements shall apply until the discrepancy can be resolved

Tank farm health and safety plan. Revision 2

Energy Technology Data Exchange (ETDEWEB)

Mickle, G.D.

1995-03-29

This Tank Farm Health and Safety Plan (HASP) for the conduct of all operations and work activities at the Hanford Site 200 Area Tank Farms is provided in order to minimize health and safety risks to workers and other onsite personnel. The HASP accomplishes this objective by establishing requirements, providing general guidelines, and conveying farm and facility-specific hazard communication information. The HASP, in conjunction with the job-specific information required by the HASP, is provided also as a reference for use during the planning of work activities at the tank farms. This HASP applies to Westinghouse Hanford Company (WHC), other prime contractors to the U.S. Department of Energy (DOE), and subcontractors to WHC who may be involved in tank farm work activities. This plan is intended to be both a requirements document and a useful reference to aid tank farm workers in understanding the safety and health issues that are encountered in routine and nonroutine work activities. The HASP defines the health and safety responsibilities of personnel working at the tank farms. It has been prepared in recognition of and is consistent with National Institute of Safety and Health (NIOSH), and Occupational Safety and Health Administration (OSHA)/Unlimited State Coast Guard (USCG)/U.S. Environmental Protection Agency (EPA), Occupational Safety and Health Guidance Manual for Hazardous Waste Site Activities (NIOSH 1985); WHC-CM-4-3, Industrial Safety Manual, Volume 4, {open_quotes}Health and Safety Programs for Hazardous Waste Operations;{close_quotes} 29 CFR 1910.120, Hazardous Waste Operations and Emergency Response; WHC-CM-1-1, Management Policies; and WHC-CM-1-3, Management Requirements and Procedures. When differences in governing regulations or policies exist, the more stringent requirements shall apply until the discrepancy can be resolved.

TAP 2, Performance-Based Training Manual

Energy Technology Data Exchange (ETDEWEB)

1991-07-01

Training programs at DOE nuclear facilities should provide well- trained, qualified personnel to safely and efficiently operate the facilities in accordance with DOE requirements. A need has been identified for guidance regarding analysis, design, development, implementation, and evaluation of consistent and reliable performance-based training programs. Accreditation of training programs at Category A reactors and high-hazard and selected moderate-hazard nonreactor facilities will assure consistent, appropriate, and cost-effective training of personnel responsible for the operation, maintenance, and technical support of these facilities. Training programs that are designed and based on systematically job requirements, instead of subjective estimation of trainee needs, yield training activities that are consistent and develop or improve knowledge, skills, and abilities that can be directly related to the work setting. Because the training is job-related, the content of these programs more efficiently and effectively meets the needs of the employee. Besides a better trained work force, a greater level of operational reactor safety can be realized. This manual is intended to provide an overview of the accreditation process and a brief description of the elements necessary to construct and maintain training programs that are based on the requirements of the job. Two comparison manuals provide additional information to assist contractors in their efforts to accredit training programs.

TAP 3, Training Program Support Manual

International Nuclear Information System (INIS)

1991-07-01

Training programs at DOE facilities should provide well-trained, qualified personnel to safely and efficiently operate the facilities in accordance with DOE requirements. A need has been identified for guidance regarding analysis, design, development, implementation, and evaluation of consistent and reliable performance-based training programs. Accreditation of training programs at Category A reactors and high-hazard and selected moderate-hazard nonreactor nuclear facilities will assure consistent, appropriate, and cost-effective training of personnel responsible for the operation, maintenance, and technical support of these facilities. Training programs that are designed and based on systematically determined job requirements, instead of subjective estimation of trainee needs, yield training activities that are consistent and develop or improve knowledge, skills, and abilities that can be directly related to the work setting. Because the training is job-related, the content of these programs more efficiently and effectively meets the needs of the employee. Besides a better trained work force, a greater level of operational reactor safety can be realized. This manual is intended to provide an overview of the accreditation process and a brief description of the elements necessary to construct and maintain training programs that are based on the requirements of the job. Two companion manuals provide additional information to assist contractors in their efforts to accredit training programs

TAP 2, Performance-Based Training Manual

International Nuclear Information System (INIS)

1991-07-01

Training programs at DOE nuclear facilities should provide well- trained, qualified personnel to safely and efficiently operate the facilities in accordance with DOE requirements. A need has been identified for guidance regarding analysis, design, development, implementation, and evaluation of consistent and reliable performance-based training programs. Accreditation of training programs at Category A reactors and high-hazard and selected moderate-hazard nonreactor facilities will assure consistent, appropriate, and cost-effective training of personnel responsible for the operation, maintenance, and technical support of these facilities. Training programs that are designed and based on systematically job requirements, instead of subjective estimation of trainee needs, yield training activities that are consistent and develop or improve knowledge, skills, and abilities that can be directly related to the work setting. Because the training is job-related, the content of these programs more efficiently and effectively meets the needs of the employee. Besides a better trained work force, a greater level of operational reactor safety can be realized. This manual is intended to provide an overview of the accreditation process and a brief description of the elements necessary to construct and maintain training programs that are based on the requirements of the job. Two comparison manuals provide additional information to assist contractors in their efforts to accredit training programs

INTRA/Mod3.2. Manual and code description. Volume 2 - User`s manual

Energy Technology Data Exchange (ETDEWEB)

Andersson, Jenny; Edlund, O.; Hermann, J.; Johansson, Lise-Lotte

1999-01-01

The INTRA Manual consists of two volumes. Volume I of the manual is a thorough description of the code INTRA, the physical modelling of INTRA and the ruling numerics, and volume II, the User`s Manual is an input description. This document, the User`s Manual, Volume II, contains a detailed description of how to use INTRA, how to set up an input file, how to run INTRA and also post-processing

Software quality assurance plans for safety-critical software

International Nuclear Information System (INIS)

Liddle, P.

2006-01-01

Application software is defined as safety-critical if a fault in the software could prevent the system components from performing their nuclear-safety functions. Therefore, for nuclear-safety systems, the AREVA TELEPERM R XS (TXS) system is classified 1E, as defined in the Inst. of Electrical and Electronics Engineers (IEEE) Std 603-1998. The application software is classified as Software Integrity Level (SIL)-4, as defined in IEEE Std 7-4.3.2-2003. The AREVA NP Inc. Software Program Manual (SPM) describes the measures taken to ensure that the TELEPERM XS application software attains a level of quality commensurate with its importance to safety. The manual also describes how TELEPERM XS correctly performs the required safety functions and conforms to established technical and documentation requirements, conventions, rules, and standards. The program manual covers the requirements definition, detailed design, integration, and test phases for the TELEPERM XS application software, and supporting software created by AREVA NP Inc. The SPM is required for all safety-related TELEPERM XS system applications. The program comprises several basic plans and practices: 1. A Software Quality-Assurance Plan (SQAP) that describes the processes necessary to ensure that the software attains a level of quality commensurate with its importance to safety function. 2. A Software Safety Plan (SSP) that identifies the process to reasonably ensure that safety-critical software performs as intended during all abnormal conditions and events, and does not introduce any new hazards that could jeopardize the health and safety of the public. 3. A Software Verification and Validation (V and V) Plan that describes the method of ensuring the software is in accordance with the requirements. 4. A Software Configuration Management Plan (SCMP) that describes the method of maintaining the software in an identifiable state at all times. 5. A Software Operations and Maintenance Plan (SO and MP) that

Camp Health Aide Manual = Manual para trabajadores de salud.

Science.gov (United States)

Robinson, June Grube; And Others

This bilingual manual serves as a textbook for migrant Camp Health Aides. Camp Health Aides are members of migrant labor camps enlisted to provide information about health and social services to migrant workers and their families. The manual is divided into 12 tabbed sections representing lessons. Teaching notes printed on contrasting paper…

Image-guided system versus manual marking for toric intraocular lens alignment in cataract surgery

NARCIS (Netherlands)

Webers, V.S.C.; Bauer, N.J.C.; Visser, N.; Berendschot, T.T.J.M.; van den Biggelaar, F.J.H.M.; Nuijts, R.M.M.A.

2017-01-01

Purpose To compare the accuracy of toric intraocular lens (IOL) alignment using the Verion Image-Guided System versus a conventional manual ink-marking procedure. Setting University Eye Clinic Maastricht, Maastricht, the Netherlands. Design Prospective randomized clinical trial. Methods Eyes with

HVAC system operation manual of IMEF

International Nuclear Information System (INIS)

Baek, Sang Yeol; Park, Dae Kyu; Ahn, Sang Bok; Ju, Yong Sun.

1997-06-01

This manual is operation procedures of the IMEF(Irradiated Material Examination Facility) HVAC(Heating, Ventilation and Air Conditioning) System. General operation procedures and test method of the IMEF HVAC system are described. The manual is as follows; 1. HVAC system operation manual 2. HVAC system management guide 3. HVAC system maintenance manual 4. HVAC system air velocity and flowrate measurement manual 5. HVAC system HEPA filter leak test manual 6. HVAC system charcoal filter leak test manual 7. HVAC system HEPA and charcoal filter exchange manual. (author). 8 tabs

Operation manual for the INEL on-line mass-separator facility

International Nuclear Information System (INIS)

Anderl, R.A.

1984-06-01

This report is an operation manual for an on-line mass-separator facility which is located in Building 661 at the Test Reactor Area of the Idaho National Engineering Laboratory. The facility provides mass-separated sources of short-lived fission-product radionuclides whose decay properties can be studied using a variety of nuclear spectroscopic techniques. This facility is unique in that it utilizes the gas-jet technique to transport fission products from a 252 Cf source located in a hot cell to the ion source of the mass separator. This document includes the following: (a) a detailed description of the facility, (b) identification of equipment hazards and safety controls, (c) detailed operating procedures for startup, continuous operation and shutdown, (d) operating procedures for the californium hot cell, and (e) an operator's manual for the automated moving tape collector/data acquisition system. 7 references, 16 figures, 8 tables

The Influence of Hand Immersion Duration on Manual Performance.

Science.gov (United States)

Ray, Matthew; Sanli, Elizabeth; Brown, Robert; Ennis, Kerri Ann; Carnahan, Heather

2017-08-01

To investigate the effect of hand immersion duration on manipulative ability and tactile sensitivity. Individuals in maritime settings often work with hands that have been immersed in water. Although research has shown that hand immersion duration differentially impacts skin adhesion and tactile sensitivity, the effect of hand immersion on manipulative ability has not been directly tested. Given how critical manipulative ability is for the safety and performance of those working at sea, the effect of hand immersion duration on manual performance was investigated. Tests of manipulative ability (Purdue Pegboard, Grooved Pegboard, reef knot untying) and tactile sensitivity (Touch-Test) were completed following no-exposure, short-exposure, and long-exposure hand immersions in thermoneutral water. Compared to the no immersion condition, the Purdue Pegboard performance was reduced in both immersion conditions (short exposure, -11%; long exposure, -8%). A performance decrement was only observed in the short exposure condition (+15% in time to complete task) for the reef knot untying task. There were no statistical differences in the Grooved Pegboard or Touch-Test scores between exposure conditions. Immersing the hands in water decreases manipulative ability except for when object properties reduce the slipperiness between the hand and object. Manual performance in a wet environment may be conserved by designing tools and objects with edges and textures that can offset the slipperiness of wet hands. To maintain safety, the time requirements for working with wet hands needs to be considered.

Safety evaluation report related to the renewal of the operating license for the Research Reactor at the State University of New York at Buffalo, Docket No. 50-57

International Nuclear Information System (INIS)

1983-05-01

This Safety Evaluation Report for the application filed by the State University of New York at Buffalo for a renewal of Operating License R-77 to continue to operate a research reactor has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is owned by the State University of New York and is located on the campus in Buffalo, New York. Based on its technical review, the staff concludes that the reactor facility can continue to be operated by the University without endangering the health and safety of the public or endangering the environment

Wind Turbine Generator System Safety and Function Test Report for the Southwest Windpower H40 Wind Turbine

Energy Technology Data Exchange (ETDEWEB)

van Dam, J.; Link, H.; Meadors, M.; Bianchi, J.

2002-06-01

The objective of this test was to evaluate the safety and function characteristics of the Whisper H40 wind turbine. The general requirements of wind turbine safety and function tests are defined in the IEC standard WT01. The testing was conducted in accordance with the National Wind Technology Center (NWTC) Quality Assurance System, including the NWTC Certification Team Certification Quality Manual and the NWTC Certification Team General Quality Manual for the Testing of Wind Turbines, as well as subordinate documents. This safety and function test was performed as part of the U.S. Department of Energy's Field Verification Program for small wind turbines.

Manual on gamma radiography. Incorporating: Applications guide, procedures guide, basics guide

International Nuclear Information System (INIS)

1996-01-01

This publication is part of practical radiation safety manual series for different fields of application aimed primarily at persons handling radiation sources on a daily routine basis, which could at same time be used by the competent authorities, supporting their efforts in the radiation protection training of workers or medical assistance personnel or helping on-site management to set up local radiation protection rules. It is dedicated to gamma radiography: its application and procedures guides

Manual on shielded enclosures. Incorporating: Applications guide, procedures guide, basics guide

International Nuclear Information System (INIS)

1996-01-01

This publication is part of practical radiation safety manual series for different fields of application aimed primarily at persons handling radiation sources on a daily routine basis, which could at same time be used by the competent authorities, supporting their efforts in the radiation protection training of workers or medical assistance personnel or helping on-site management to set up local radiation protection rules. It is dedicated to shielding enclosures: their application and procedures guides

Manual on nuclear gauges. Incorporating: Applications guide, procedures guide, basics guide

International Nuclear Information System (INIS)

1996-01-01

This publication is part of practical radiation safety manual series for different fields of application aimed primarily at persons handling radiation sources on a daily routine basis, which could at same time be used by the competent authorities, supporting their efforts in the radiation protection training of workers or medical assistance personnel or helping on-site management to set up local radiation protection rules. It is dedicated to nuclear gauges: their application and procedures guides

A Manual of Style.

Science.gov (United States)

Nebraska State Dept. of Education, Lincoln.

This "Manual of Style" is offered as a guide to assist Nebraska State employees in producing quality written communications and in presenting a consistently professional image of government documents. The manual is not designed to be all-inclusive. Sections of the manual discuss formatting documents, memorandums, letters, mailing…

[Manual handling of loads in the hotel trade: the experience of the ASL (Local Health Unit) Milan].

Science.gov (United States)

Fontani, S; Mercuri, Irene; Salicco, R; Veratti, Silvia; Sorrentino, L

2010-01-01

There are over 400 hotels in Milan with a guest capacity of about 62,000 and employing more than 10,000 workers. In 2008/09 the Occupational Health and Safety Service of A.S.L. Milano (Local Health Unit) carried out research into the hotel trade to ascertain the development of this commercial sector, also in view of EXPO 2015. The aim of the project was to improve hygiene and safety conditions and carry out preventive measures. A specific purpose was to study manual handling of loads and repetitive movements risk. The study covered 30 hotels and 7 temporary staff cooperatives. We acquired the Risk Evaluation Document, the Health Surveillance Programme and Registers of Labour Accidents to analyze manual handling of loads and repetitive movements. In the investigations and assessments on hotels we used currently available scientific tools--NIOSH Lifting Index, Push and Pulling Analysis, OC.R.A. Check-List--to study risks related to handling loads and upper limb mechanical overload, which revealed a specific occupational risk that requires a fresh approach to prevention and safety in the entire sector. Chambermaid: LI (Range): 0.57-2.75; Push and Pulling Actions: Fi 0.66-Fm 1.5 and Fi 0.76-Fm 1.33 respectively; OC.R.A. Check-List: 21. Porter: LI (Range): 0.77-3.75. Maintenance staff LI (Range): 0.57-2.75. The study highlighted the presence of risk due to manual handling of loads and repetitive movements in porters, maintenance personnel and particularly in chambermaids that up to now have been poorly assessed by safety experts. Analysis of the information contained in the registers of labour accidents suggests that a significant number of accidents can be related to muscular-skeletal disorders that affect especially cleaning, portering and kitchen staff

MARS CODE MANUAL VOLUME III - Programmer's Manual

International Nuclear Information System (INIS)

Chung, Bub Dong; Hwang, Moon Kyu; Jeong, Jae Jun; Kim, Kyung Doo; Bae, Sung Won; Lee, Young Jin; Lee, Won Jae

2010-02-01

Korea Advanced Energy Research Institute (KAERI) conceived and started the development of MARS code with the main objective of producing a state-of-the-art realistic thermal hydraulic systems analysis code with multi-dimensional analysis capability. MARS achieves this objective by very tightly integrating the one dimensional RELAP5/MOD3 with the multi-dimensional COBRA-TF codes. The method of integration of the two codes is based on the dynamic link library techniques, and the system pressure equation matrices of both codes are implicitly integrated and solved simultaneously. In addition, the Equation-Of-State (EOS) for the light water was unified by replacing the EOS of COBRA-TF by that of the RELAP5. This programmer's manual provides a complete list of overall information of code structure and input/output function of MARS. In addition, brief descriptions for each subroutine and major variables used in MARS are also included in this report, so that this report would be very useful for the code maintenance. The overall structure of the manual is modeled on the structure of the RELAP5 and as such the layout of the manual is very similar to that of the RELAP. This similitude to RELAP5 input is intentional as this input scheme will allow minimum modification between the inputs of RELAP5 and MARS3.1. MARS3.1 development team would like to express its appreciation to the RELAP5 Development Team and the USNRC for making this manual possible

Quality Manual

Science.gov (United States)

Koch, Michael

The quality manual is the “heart” of every management system related to quality. Quality assurance in analytical laboratories is most frequently linked with ISO/IEC 17025, which lists the standard requirements for a quality manual. In this chapter examples are used to demonstrate, how these requirements can be met. But, certainly, there are many other ways to do this.

Principal characteristics of good safety culture

Energy Technology Data Exchange (ETDEWEB)

Zhong, W [International Atomic Energy Agency, Vienna (Austria)

1997-09-01

The presentation briefly discusses the following aspects of safety culture: what is safety culture; universal features of safety culture; the main elements of safety culture; requirements at policy level; safety culture at government level, regulatory body, operators; requirements on managers.

Principal characteristics of good safety culture

International Nuclear Information System (INIS)

Zhong, W.

1997-01-01

The presentation briefly discusses the following aspects of safety culture: what is safety culture; universal features of safety culture; the main elements of safety culture; requirements at policy level; safety culture at government level, regulatory body, operators; requirements on managers

West Valley Reprocessing Plant. Safety analysis report, supplement 21

International Nuclear Information System (INIS)

1976-01-01

Supplement No. 21 contains responses to USNRC questions on quality assurance contained in USNRC letter to NFS dated January 22, 1976, revised pages for the safety analysis report, and Appendix IX ''Quality Assurance Manual--West Valley Construction Projects.''

Automating the Generation of Heterogeneous Aviation Safety Cases

Science.gov (United States)

Denney, Ewen W.; Pai, Ganesh J.; Pohl, Josef M.

2012-01-01

A safety case is a structured argument, supported by a body of evidence, which provides a convincing and valid justification that a system is acceptably safe for a given application in a given operating environment. This report describes the development of a fragment of a preliminary safety case for the Swift Unmanned Aircraft System. The construction of the safety case fragment consists of two parts: a manually constructed system-level case, and an automatically constructed lower-level case, generated from formal proof of safety-relevant correctness properties. We provide a detailed discussion of the safety considerations for the target system, emphasizing the heterogeneity of sources of safety-relevant information, and use a hazard analysis to derive safety requirements, including formal requirements. We evaluate the safety case using three classes of metrics for measuring degrees of coverage, automation, and understandability. We then present our preliminary conclusions and make suggestions for future work.

Development and design of a computer-assisted information management system for radiation safety management at the University of Washington

International Nuclear Information System (INIS)

Riches, C.G.; Riordan, F.J.; Robb, D.; Grieb, C.; Pence, G.; O'Brien, M.J.

1984-01-01

The Radiation Safety Office (RSO) at the University of Washington (UW) found that it needed a computerized information system to help manage the campus radiation safety program and to help provide the records necessary to show compliance with regulations and license requirements. The John L. Locke Computer Center at the UW had just developed the GLAMOR system to aid information entry and query for their computer when the RSO turned to them for assistance. The module that was developed provided a mechanism for controlling and monitoring radioactive materials on campus. This became one part of a multi-faceted system that registers users, employees, sealed sources and radiation-producing machines. The system is designed to be interactive, for immediate information recall, and powerful enough to provide routine and special reports on compliance status. The RSO information system is designed to be flexible and can easily incorporate additional features. Some future features include an interactive SNM control program, an interface to the information system currently being developed for the occupational safety and health program and an interface to the database provided by the commercial film badge service used by the University. Development of this program lead the RSO to appreciate the usefulness of having health physics professionals on the staff who were also knowledgeable about computers and who could develop programs and reports necessary to their activities

Physical hazard safety awareness among healthcare workers in Tanta university hospitals, Egypt.

Science.gov (United States)

El-Sallamy, Rania M; Kabbash, Ibrahim Ali; El-Fatah, Sanaa Abd; El-Feky, Asmaa

2017-05-17

Hospital workers are exposed to many occupational hazards that may threaten their health and safety. Physical hazards encountered in hospital working environment include temperature, illumination, noise, electrical injuries, and radiation. To assess the awareness of healthcare workers (HCWs) about physical hazards in Tanta university hospitals, this cross-sectional study included 401 HCWs (physicians, nurses, technicians, and workers) from seven departments (general surgery, orthopedics, radiology, ophthalmology, kitchen, incinerator, and laundry). Data were collected through interview questionnaire to assess six types of physical hazards (noise, electric hazards, temperature, radiation, fire, and lighting,). Most of the physicians (63.7%) were aware of the level of noise. All physicians, nurses, technicians, and majority of workers reported that hearing protective devices were not available, and all HCWs reported that periodic hearing examination was not performed. Most of the nurses (75.2%) and workers (68.5%) did not attended emergency training, and more than two thirds of all HCWs were not briefed about emergency evacuation. Most HCWs were not given appropriate radiation safety training before starting work (88% of workers, 73.7% of nurses, 65.7% of physicians, and 68.3% of technicians). The majority of physicians, nurses, and technicians (70.5, 65.4, and 53.7%) denied regular environmental monitoring for radiation level inside work place. Health education programs on health and safety issues regarding physical hazards should be mandatory to all healthcare workers to improve their awareness and protect them from undue exposures they may face due to lack of adequate awareness and knowledge. There is urgent need of expanding the occupational healthcare services in Egypt to cover all the employees as indicated by the international recommendations and the Egyptian Constitution, legislation, and community necessity.

Guidance for the application of an assessment methodology for innovative nuclear energy systems. INPRO manual - Safety of nuclear fuel cycle facilities. Vol. 9 of the final report of phase 1 of the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO)

International Nuclear Information System (INIS)

2008-11-01

The International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) was initiated in the year 2000, based on a resolution of the IAEA General Conference (GC(44)/RES/21). The main objectives of INPRO are (1) to help to ensure that nuclear energy is available to contribute in fulfilling energy needs in the 21st century in a sustainable manner, (2) to bring together both technology holders and technology users to consider jointly the international and national actions required to achieve desired innovations in nuclear reactors and fuel cycles; and (3) to create a forum to involve all relevant stakeholders that will have an impact on, draw from, and complement the activities of existing institutions, as well as ongoing initiatives at the national and international level. The INPRO manual is comprised of an overview volume (No. 1), and eight additional volumes covering the areas of economics (Volume 2), infrastructure (Volume 3), waste management (Volume 4), proliferation resistance (Volume 5), physical protection (Volume 6), environment (Volume 7), safety of nuclear reactors (Volume 8), and safety of nuclear fuel cycle facilities (laid out in this report) (Volume 9).This report elaborates on the guidance given in the INPRO report 'Methodology for the assessment of innovative nuclear reactors and fuel cycles', IAEA-TECDOC-1434, and the previous INPRO report 'Guidance for the evaluation for innovative nuclear reactors and fuel cycles', IAEA-TECDOC-1362 (2003), in the area of safety of nuclear reactors. The present version of this manual deals with safety issues related to design and operation of mining, milling, refining, conversion, enrichment, fuel fabrication, fuel storage and fuel reprocessing facilities. The INPRO Manual starts with an introduction in Chapter 1. Chapter 2 sets out the necessary input for an INPRO assessment of the safety of an innovative nuclear fuel cycle facility. This includes information on the design for the plant and the safety

SHARP User Manual

Energy Technology Data Exchange (ETDEWEB)

Yu, Y. Q. [Argonne National Lab. (ANL), Argonne, IL (United States); Shemon, E. R. [Argonne National Lab. (ANL), Argonne, IL (United States); Thomas, J. W. [Argonne National Lab. (ANL), Argonne, IL (United States); Mahadevan, Vijay S. [Argonne National Lab. (ANL), Argonne, IL (United States); Rahaman, Ronald O. [Argonne National Lab. (ANL), Argonne, IL (United States); Solberg, Jerome [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-03-31

SHARP is an advanced modeling and simulation toolkit for the analysis of nuclear reactors. It is comprised of several components including physical modeling tools, tools to integrate the physics codes for multi-physics analyses, and a set of tools to couple the codes within the MOAB framework. Physics modules currently include the neutronics code PROTEUS, the thermal-hydraulics code Nek5000, and the structural mechanics code Diablo. This manual focuses on performing multi-physics calculations with the SHARP ToolKit. Manuals for the three individual physics modules are available with the SHARP distribution to help the user to either carry out the primary multi-physics calculation with basic knowledge or perform further advanced development with in-depth knowledge of these codes. This manual provides step-by-step instructions on employing SHARP, including how to download and install the code, how to build the drivers for a test case, how to perform a calculation and how to visualize the results. Since SHARP has some specific library and environment dependencies, it is highly recommended that the user read this manual prior to installing SHARP. Verification tests cases are included to check proper installation of each module. It is suggested that the new user should first follow the step-by-step instructions provided for a test problem in this manual to understand the basic procedure of using SHARP before using SHARP for his/her own analysis. Both reference output and scripts are provided along with the test cases in order to verify correct installation and execution of the SHARP package. At the end of this manual, detailed instructions are provided on how to create a new test case so that user can perform novel multi-physics calculations with SHARP. Frequently asked questions are listed at the end of this manual to help the user to troubleshoot issues.

SHARP User Manual

International Nuclear Information System (INIS)

Yu, Y. Q.; Shemon, E. R.; Thomas, J. W.; Mahadevan, Vijay S.; Rahaman, Ronald O.; Solberg, Jerome

2016-01-01

SHARP is an advanced modeling and simulation toolkit for the analysis of nuclear reactors. It is comprised of several components including physical modeling tools, tools to integrate the physics codes for multi-physics analyses, and a set of tools to couple the codes within the MOAB framework. Physics modules currently include the neutronics code PROTEUS, the thermal-hydraulics code Nek5000, and the structural mechanics code Diablo. This manual focuses on performing multi-physics calculations with the SHARP ToolKit. Manuals for the three individual physics modules are available with the SHARP distribution to help the user to either carry out the primary multi-physics calculation with basic knowledge or perform further advanced development with in-depth knowledge of these codes. This manual provides step-by-step instructions on employing SHARP, including how to download and install the code, how to build the drivers for a test case, how to perform a calculation and how to visualize the results. Since SHARP has some specific library and environment dependencies, it is highly recommended that the user read this manual prior to installing SHARP. Verification tests cases are included to check proper installation of each module. It is suggested that the new user should first follow the step-by-step instructions provided for a test problem in this manual to understand the basic procedure of using SHARP before using SHARP for his/her own analysis. Both reference output and scripts are provided along with the test cases in order to verify correct installation and execution of the SHARP package. At the end of this manual, detailed instructions are provided on how to create a new test case so that user can perform novel multi-physics calculations with SHARP. Frequently asked questions are listed at the end of this manual to help the user to troubleshoot issues.

Wearing ambidextrous vinyl gloves does not impair manual dexterity.

Science.gov (United States)

Drabek, Tomas; Boucek, Charles D; Buffington, Charles W

2013-01-01

Universal precautions mandate that health care workers wear gloves to prevent the unintended spread of bloodborne pathogens. Gloves may affect manual dexterity, generally delaying task completion. Our previous study showed that wearing the wrong size latex surgical glove degraded manual dexterity. The use of non-sterile and non-latex gloves may limit certain risks and be more cost-effective. However, such gloves may produce different results. We hypothesized that ambidextrous vinyl examination gloves would degrade manual dexterity compared with bare hands. We studied 20 random subjects from a medical environment. Subjects performed a standard battery of Grooved Pegboard tasks while bare-handed, wearing ambidextrous non-sterile vinyl gloves that were their preferred size, a size too small, and a size too large. The order was randomized with a Latin Square design to minimize the effects of time, boredom, and fatigue on the subjects. Subjects were also invited to comment on the fit of different size gloves. Wearing vinyl gloves of both the preferred size and a size up or down failed to affect manual dexterity vs. bare hands on time to insert pegs, and pegs dropped during insertion or removal. In contrast, the time to remove pegs was reduced by wearing preferred size vinyl gloves compared with performing the task with bare hands (Pgloves that were too small caused significant hand discomfort. Vinyl gloves surprisingly do not degrade manual dexterity even when worn in ill-fitting sizes. Wearing a preferred size vinyl glove vs. bare hands may improve dexterity in selected tasks. Choosing a comfortable, large size seems the best strategy when the preferred size is unavailable. Thinner vinyl gloves may improve grip and may not degrade touch as much as latex surgical gloves and may thus represent a reasonable choice for selected tasks.

Quality management manual for production of high quality cassava flour

DEFF Research Database (Denmark)

Dziedzoave, Nanam Tay; Abass, Adebayo Busura; Amoa-Awua, Wisdom K.

The high quality cassava flour (HQCF) industry has just started to evolve in Africa and elsewhere. The sustainability of the growing industry, the profitability of small- and medium-scale enterprises (SMEs) that are active in the industry and good-health of consumers can best be guaranteed through...... the adoption of proper quality and food safety procedures. Cassava processing enterprises involved in the productionof HQCF must therefore be commited to the quality and food safety of the HQCF. They must have the right technology, appropriate processing machhinery, standard testing instruments...... and the necessary technical expertise. This quality manual was therefore developed to guide small- to medium-scale cassava in the design and implematation of Hazard Analysis Critical Control Point (HACCP) system and Good manufacturing Practices (GMP) plans for HQCF production. It describes the HQCF production...

Periodic safety review of the HTR-10 safety analysis

International Nuclear Information System (INIS)

Chen Fubing; Zheng Yanhua; Shi Lei; Li Fu

2015-01-01

Designed by the Institute of Nuclear and New Energy Technology (INET) of Tsinghua University, the 10 MW High Temperature Gas-cooled Reactor-Test Module (HTR-10) is the first modular High Temperature Gas-cooled Reactor (HTGR) in China. According to the nuclear safety regulations of China, the periodic safety review (PSR) of the HTR-10 was initiated by INET after approved by the National Nuclear Safety Administration (NNSA) of China. Safety analysis of the HTR-10 is one of the key safety factors of the PSR. In this paper, the main contents in the review of safety analysis are summarized; meanwhile, the internal evaluation on the review results is presented by INET. (authors)

Radiation safety

International Nuclear Information System (INIS)

Van Riessen, A.

2002-01-01

Full text: Experience has shown that modem, fully enclosed, XRF and XRD units are generally safe. This experience may lead to complacency and ultimately a lowering of standards which may lead to accidents. Maintaining awareness of radiation safety issues is thus an important role for all radiation safety officers. With the ongoing progress in technology, a greater number of radiation workers are more likely to use a range of instruments/techniques - eg portable XRF, neutron beam analysis, and synchrotron radiation analysis. The source for each of these types of analyses is different and necessitates an understanding of the associated dangers as well as use of specific radiation badges. The trend of 'suitcase science' is resulting in scientists receiving doses from a range of instruments and facilities with no coordinated approach to obtain an integrated dose reading for an individual. This aspect of radiation safety needs urgent attention. Within Australia a divide is springing up between those who work on Commonwealth property and those who work on State property. For example a university staff member may operate irradiating equipment on a University campus and then go to a CSIRO laboratory to operate similar equipment. While at the University State regulations apply and while at CSIRO Commonwealth regulations apply. Does this individual require two badges? Is there a need to obtain two licences? The application of two sets of regulations causes unnecessary confusion and increases the workload of radiation safety officers. Radiation safety officers need to introduce risk management strategies to ensure that both existing and new procedures result in risk minimisation. A component of this strategy includes ongoing education and revising of regulations. AXAA may choose to contribute to both of these activities as a service to its members as well as raising the level of radiation safety for all radiation workers. Copyright (2002) Australian X-ray Analytical

Evaluation of manual and automatic manually triggered ventilation performance and ergonomics using a simulation model.

Science.gov (United States)

Marjanovic, Nicolas; Le Floch, Soizig; Jaffrelot, Morgan; L'Her, Erwan

2014-05-01

In the absence of endotracheal intubation, the manual bag-valve-mask (BVM) is the most frequently used ventilation technique during resuscitation. The efficiency of other devices has been poorly studied. The bench-test study described here was designed to evaluate the effectiveness of an automatic, manually triggered system, and to compare it with manual BVM ventilation. A respiratory system bench model was assembled using a lung simulator connected to a manikin to simulate a patient with unprotected airways. Fifty health-care providers from different professional groups (emergency physicians, residents, advanced paramedics, nurses, and paramedics; n = 10 per group) evaluated manual BVM ventilation, and compared it with an automatic manually triggered device (EasyCPR). Three pathological situations were simulated (restrictive, obstructive, normal). Standard ventilation parameters were recorded; the ergonomics of the system were assessed by the health-care professionals using a standard numerical scale once the recordings were completed. The tidal volume fell within the standard range (400-600 mL) for 25.6% of breaths (0.6-45 breaths) using manual BVM ventilation, and for 28.6% of breaths (0.3-80 breaths) using the automatic manually triggered device (EasyCPR) (P < .0002). Peak inspiratory airway pressure was lower using the automatic manually triggered device (EasyCPR) (10.6 ± 5 vs 15.9 ± 10 cm H2O, P < .001). The ventilation rate fell consistently within the guidelines, in the case of the automatic manually triggered device (EasyCPR) only (10.3 ± 2 vs 17.6 ± 6, P < .001). Significant pulmonary overdistention was observed when using the manual BVM device during the normal and obstructive sequences. The nurses and paramedics considered the ergonomics of the automatic manually triggered device (EasyCPR) to be better than those of the manual device. The use of an automatic manually triggered device may improve ventilation efficiency and decrease the risk of

Study of Occupational Safety and Health Audit on Facilities at Ungku Omar College, Universiti Kebangsaan Malaysia (UKM): A Preliminary Analysis

Science.gov (United States)

Ariffin, Kadir; Ahmad, Shaharuddin; Aiyub, Kadaruddin; Awang, Azhan; Aziz, Azmi; Mohamad, Lukman Z.; Mamat, Samsu Adabi

2010-01-01

Occupational safety and health (OSH) in Universiti Kebangsaan Malaysia (UKM) is being considered as an important program to measure employee and student welfare and well-being. During academic session, apart from attending lectures, laboratory works, tutorial and library search, majority of students spend most of their time in residential…

Effect of Surgical Safety Checklist on Mortality of Surgical Patients in the α University Hospitals

Directory of Open Access Journals (Sweden)

R. Mohebbifar

2014-01-01

Full Text Available Background & Aims: Patient safety is one of the indicators of risk management in clinical governance system. Surgical care is one of the most sophisticated medical care in the hospitals. So it is not surprising that nearly half of the adverse events, 66% were related to surgery. Pre-flight aircraft Inspection model is starting point for designing surgical safety checklist that use for audit procedure. The aim of this study is to evaluate the effect of the use of surgical safety checklist on surgical patients mortality and complications. Materials and Methods: This is a prospective descriptive study. This study was conducted in 2012 in the North West of Iran. The population consisted of patients who had undergoing surgery in α university of medical science`s hospital which have surgical department. In this study, 1125 patients underwent surgery within 3 months were studied. Data collection tool was designed based on WHO model and Surgcical Care and Outcomes Assessment Program(SCOAP. Data analysis was performed using the SPSS-20 statistical software and logistic regression analysis was used to calculate P values for each comparison. Results: No significant differences between patients in the two periods (before and after There was. All complications rate reduced from 11 percent to 4 percent after the intervention by checklist (p<0.001. In the all hospitals mortality rate was decreased from 3.44% to 1.3% (p <0.003. Overall rate of surgical site infection and unplanned return to the operating room was reduced (p<0.001 and p<0.046. Conclusion: Many people every year due to lack of safety in hospitals, lose their lives. Despite the risks, such as leaving surgery sets in patient body and wrong surgery is due to lack of proper safety programs during surgery. By using safety checklist in all hospitals mortality rate and complications was reduced but this reduction was extremely in α3 hospital (from 5.2% to 1.48%.

SERA: Simulation Environment for Radiotherapy Applications - Users Manual Version 1CO

International Nuclear Information System (INIS)

Venhuizen, James Robert; Wessol, Daniel Edward; Wemple, Charles Alan; Wheeler, Floyd J; Harkin, G. J.; Frandsen, M. W.; Albright, C. L.; Cohen, M.T.; Rossmeier, M.; Cogliati, J.J.

2002-01-01

This document is the user manual for the Simulation Environment for Radiotherapy Applications (SERA) software program developed for boron-neutron capture therapy (BNCT) patient treatment planning by researchers at the Idaho National Engineering and Environmental Laboratory (INEEL) and students and faculty at Montana State University (MSU) Computer Science Department. This manual corresponds to the final release of the program, Version 1C0, developed to run under the RedHat Linux Operating System (version 7.2 or newer) or the Solaris Operating System (version 2.6 or newer). SERA is a suite of command line or interactively launched software modules, including graphical, geometric reconstruction, and execution interface modules for developing BNCT treatment plans. The program allows the user to develop geometric models of the patient as derived from Computed Tomography (CT) and Magnetic Resonance Imaging (MRI) images, perform dose computation for these geometric models, and display the computed doses on overlays of the original images as three dimensional representations. This manual provides a guide to the practical use of SERA, but is not an exhaustive treatment of each feature of the code

SERA: Simulation Environment for Radiotherapy Applications - Users Manual Version 1CO

Energy Technology Data Exchange (ETDEWEB)

Venhuizen, James Robert; Wessol, Daniel Edward; Wemple, Charles Alan; Wheeler, Floyd J; Harkin, G. J.; Frandsen, M. W.; Albright, C. L.; Cohen, M.T.; Rossmeier, M.; Cogliati, J.J.

2002-06-01

This document is the user manual for the Simulation Environment for Radiotherapy Applications (SERA) software program developed for boron-neutron capture therapy (BNCT) patient treatment planning by researchers at the Idaho National Engineering and Environmental Laboratory (INEEL) and students and faculty at Montana State University (MSU) Computer Science Department. This manual corresponds to the final release of the program, Version 1C0, developed to run under the RedHat Linux Operating System (version 7.2 or newer) or the Solaris™ Operating System (version 2.6 or newer). SERA is a suite of command line or interactively launched software modules, including graphical, geometric reconstruction, and execution interface modules for developing BNCT treatment plans. The program allows the user to develop geometric models of the patient as derived from Computed Tomography (CT) and Magnetic Resonance Imaging (MRI) images, perform dose computation for these geometric models, and display the computed doses on overlays of the original images as three dimensional representations. This manual provides a guide to the practical use of SERA, but is not an exhaustive treatment of each feature of the code.

A Comparison of the mechanical engineering and safety engineering student’s ICT attitudes at the Obuda University

Directory of Open Access Journals (Sweden)

Kiss Gabor

2016-01-01

Full Text Available Communication and technology are critical to education. However, using technology in education is not an easy task as communication barriers emerge. The aim of this research is to analyze the ICT attitudes from different faculties at the Obuda University that is between the mechanical engineering students and safety engineering students from the Donát Bánki Mechanical Safety Engineer Faculty. The students from these two groups will use different ICT tool at work after their graduation; the mechanical engineering students will work mostly with designer ICT tools, the safety engineering students will use security systems. It would be important to know whether instructors, when using ICT, have to follow different teaching methods and approaches in these two different groups or not. We measured the ICT attitude with a tool consisting of 23 items (Likert scaled. We worked with 361 students. The data analysis was performed with SPSS software using descriptive statistics and Mann-Whitney test. The results show both groups having the same positive ICT attitude however with one difference.

The Manual Work Instability Scale: development and validation.

Science.gov (United States)

Gilworth, G; Smyth, M G; Smith, J; Tennant, A

2016-06-01

Increasing awareness of the burden of absenteeism and reduced performance at work highlights the importance of early identification of individuals experiencing work instability (WI), a mismatch between functional and cognitive abilities and job demands. To develop and validate a screening questionnaire to measure WI in manual workers. Questionnaire items were generated via qualitative interviews with manual workers and a draft survey instrument was completed by workers in a variety of fields. Rasch analysis was used interactively to assess the psychometric aspects of the emerging scale, including unidimensionality and absence of item bias (differential item functioning). A total of 17 qualitative interviews generated 110 potential items for the questionnaire. The item set resolved to a 25-item scale, which satisfied model expectations (item residual mean = -0.13, SD = 1.04; person residual mean = -0.29, SD = 0.75), had good reliability (alpha = 0.86) and strict unidimensionality (t-test 7.5% confidence interval 3.8-11.2). The Manual Work Instability Scale is a short psychometrically robust questionnaire based on the concept of WI, which incorporates both musculoskeletal symptoms and relevant psychosocial factors. It may prove effective in screening and identifying WI in workers in predominantly physical occupations. © The Author 2016. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Preparation, review, and approval of implementation plans for nuclear safety requirements

International Nuclear Information System (INIS)

1994-10-01

This standard describes an acceptable method to prepare, review, and approve implementation plans for DOE Nuclear Safety requirements. DOE requirements are identified in DOE Rules, Orders, Notices, Immediate Action Directives, and Manuals

VIPRE-01: a thermal-hydraulic code for reactor cores. Volume 3: programmer's manual (Revision 2)

International Nuclear Information System (INIS)

Stewart, C.W.; Koontz, A.S.; Cuta, J.M.; Montgomery, S.D.

1985-07-01

The VIPRE thermal-hydraulic computer code for PWR and BWR core analysis has undergone a detailed design review by a committee of experts. A new version of the code, incorporating the committee's recommendations, has been submitted for NRC review and issuance of a safety evaluation report. The changes in the programmers's manual are given

CRISP instrument manual

International Nuclear Information System (INIS)

Bucknall, D.G.; Langridge, Sean

1997-05-01

This document is a user manual for CRISP, one of the two neutron reflectomers at ISIS. CRISP is highly automated allowing precision reproducible measurements. The manual provides detailed instructions for the setting-up and running of the instrument and advice on data analysis. (UK)

Assessing the Safety Attitudes Questionnaire (SAQ), German language version in Swiss university hospitals--a validation study.

Science.gov (United States)

Zimmermann, Natalie; Küng, Kaspar; Sereika, Susan M; Engberg, Sandra; Sexton, Bryan; Schwendimann, René

2013-09-10

Improving patient safety has become a major focus of clinical care and research over the past two decades. An institution's patient safety climate represents an essential component of ensuring a safe environment and thereby can be vital to the prevention of adverse events. Covering six patient safety related factors, the Safety Attitudes Questionnaire (SAQ) is a validated and widely used instrument to measure the patient safety climate in clinical areas. The objective of this study was to assess the psychometric properties of the German language version of the SAQ. A survey was carried out in two University Hospitals in Switzerland in autumn 2009 where the SAQ was distributed to a sample of 406 nurses and physicians in medical and surgical wards. Following the American Educational Research Association guidelines, we tested the questionnaire validity by levels of evidence: content validity, internal structure and relations to other variables. Confirmatory factor analysis was used to examine factor structure. Cronbach's alphas and inter-item correlations were calculated to examine internal consistency reliability. A total of 319 questionnaires were completed representing an overall response rate of 78.6%. For three items, the item content validity index was <0.75. Confirmatory factor analysis showed acceptable model fit (RMSEA = 0.045; CFI = 0.944) for the six-factor model. Additional exploratory factor analysis could not identify a better factor model. SAQ factor scores showed positive correlations with the Safety Organizing Scale (r = .56-.72). The SAQ German version showed moderate to strong internal consistency reliability indices (Cronbach alpha = .65-.83). The German language version of the SAQ demonstrated acceptable to good psychometric properties and therefore shows promise to be a sound instrument to measure patient safety climate in Swiss hospital wards. However, the low item content validity and large number of missing responses for several items suggest

Salinas : theory manual.

Energy Technology Data Exchange (ETDEWEB)

Walsh, Timothy Francis; Reese, Garth M.; Bhardwaj, Manoj Kumar

2004-08-01

This manual describes the theory behind many of the constructs in Salinas. For a more detailed description of how to use Salinas , we refer the reader to Salinas, User's Notes. Many of the constructs in Salinas are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Salinas are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programer-notes manual, the user's notes and of course the material in the open literature.

PCs The Missing Manual

CERN Document Server

Karp, David

2005-01-01

Your vacuum comes with one. Even your blender comes with one. But your PC--something that costs a whole lot more and is likely to be used daily and for tasks of far greater importance and complexity--doesn't come with a printed manual. Thankfully, that's not a problem any longer: PCs: The Missing Manual explains everything you need to know about PCs, both inside and out, and how to keep them running smoothly and working the way you want them to work. A complete PC manual for both beginners and power users, PCs: The Missing Manual has something for everyone. PC novices will appreciate the una

Safety evaluation report related to the renewal of the operating license for the training and research reactor at the University of Maryland (Docket No. 50-166)

International Nuclear Information System (INIS)

1984-03-01

This Safety Evaluation Report for the application filed by the University of Maryland (UMD) for a renewal of operating license R-70 to continue to operate a training and research reactor facility has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is owned and operated by the University of Maryland and is located at a site in College Park, Prince Georges County, Maryland. The staff concludes that this training reactor facility can continue to be operated by UMD without endangering the health and safety of the public

Handbook of laboratory techniques; Manual de tecnicas de laboratorio

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-07-01

The Nuclear Regulatory Authority in Argentina have laboratories of support to regulations functions on radiological and nuclear safety, safeguards and physical protection, that have a surface of 2950 m{sup 2} in the Ezeiza Atomic Center. The manual describes in seven chapters the different techniques developed and applied in the laboratories along four decades of existence. The chapter 1: Dedicated to the treatment of environmental samples, described the procedures associated with the different types of samples: deposits, waters, sediments, vegetables, milk, fish and diet. The chapter 2: Details 48 radiochemical techniques associated to the measurements of americium 241, carbon 16, strontium 90, iodine 129, plutonium, radium 226, radon, uranium, nickel and actinides. The chapter 3: Describes the measurements techniques of alpha and gamma spectrometry. The different techniques of biological and physical dosimetry are described in the chapters 5 and 6 respectively. The final chapter is dedicated the techniques of external and internal contamination. It s important to emphasize that this manual contains the standardized technologies that the Nuclear Regulatory Authority of Argentina submits regularly to international comparisons.

MRI-guided percutaneous cryoablation of renal tumors: Use of external manual displacement of adjacent bowel loops

International Nuclear Information System (INIS)

Tuncali, Kemal; Morrison, Paul R.; Tatli, Servet; Silverman, Stuart G.

2006-01-01

Purpose: We sought to investigate retrospectively the safety and effectiveness of using external hand compression to displace adjacent bowel loops during MRI-guided percutaneous cryoablation of renal tumors. Materials and methods: Fourteen patients (six women, eight men; mean age: 72 years) with 15 renal tumors (mean diameter: 2.4 cm; range: 1.4-4.6 cm) adjacent to bowel were treated with MRI-guided percutaneous cryoablation during which bowel was displaced manually. Bowel loop of concern was ascending colon (n 5), descending colon (n = 8), descending colon and small bowel (n = 1), ascending colon and small bowel (n = 1). To analyze effectiveness of the maneuver, mean distance between tumor margin and bowel before and after the maneuver were compared and analyzed using paired Student's t-test. Minimum distance between iceball edge and adjacent bowel with external manual displacement during freezing was also measured. Safety was assessed by analyzing post-procedural MR imaging for adjacent bowel wall thickening and focal fluid collections as well as patients' clinical and imaging follow-up. Results: Mean distance between tumor margin and closest adjacent bowel increased from 0.8 cm (range: 0-2 cm) before external manual compression to 2.6 cm (range: 1.6-4.1 cm) with manual displacement (p < 0.01). Mean minimum distance between iceball edge and closest adjacent bowel during the procedures was 1.6 cm (range: 0.5-3.5 cm). No evidence of bowel injury was encountered. Twelve of 15 tumors had follow-up (mean: 10 months) that showed no tumor recurrence. Conclusion: MRI-guided percutaneous cryoablation of renal tumors adjacent to bowel can be done safely and effectively using external hand compression to displace bowel loops

Advances in industrial ergonomics and safety I

Energy Technology Data Exchange (ETDEWEB)

Mital, A. (ed.) (University of Cincinnati, Cincinnati, OH (USA). Dept. of Mechanical and Industrial Engineering, Ergonomics Research Lab.)

1989-01-01

125 papers are presented under the session headings: industrial ergonomics - programs and applications; applied work physiology; occupational biomechanics; engineering anthropometry; work and protective clothing; hand tools; human-computer interface; theory and practice of industrial safety; human perception and performance; human strengths; industrial noise and vibration; machine guarding and industrial machine safety; manual materials handling; modelling for safety and health; occupational injuries and health problems; policies and standards; quality control and inspection; rehabilitation and designing for the disabled; work duration and fatigue; and work and work place design. Includes papers on static and dynamic back strength of underground coal miners, and slip and fall accidents during equipment maintenance in the surface mining industry.

Safety in the Chemical Laboratory: Safety in the Chemistry Laboratories: A Specific Program.

Science.gov (United States)

Corkern, Walter H.; Munchausen, Linda L.

1983-01-01

Describes a safety program adopted by Southeastern Louisiana University. Students are given detailed instructions on laboratory safety during the first laboratory period and a test which must be completely correct before they are allowed to return to the laboratory. Test questions, list of safety rules, and a laboratory accident report form are…

Design and installation manual for thermal energy storage

Energy Technology Data Exchange (ETDEWEB)

Cole, R L; Nield, K J; Rohde, R R; Wolosewicz, R M [eds.

1979-02-01

The purpose for this manual is to provide information on the design and installation of thermal energy storage in solar heating systems. It is intended for contractors, installers, solar system designers, engineers, architects, and manufacturers who intend to enter the solar energy business. The reader should have general knowledge of how solar heating systems operate and knowledge of construction methods and building codes. Knowledge of solar analysis methods such as f-chart, SOLCOST, DOE-1, or TRNSYS would be helpful. The information contained in the manual includes sizing storage, choosing a location for the storage device, and insulation requirements. Both air-based and liquid-based systems are covered with topics on designing rock beds, tank types, pump and fan selection, installation, costs, and operation and maintenance. Topics relevant to heating domestic water include safety, single- and dual-tank systems, domestic water heating with air- and liquid-based space heating system, and stand-alone domestic hot water systems. Several appendices present common problems with storage systems and their solutions, heat transfer fluid properties, heat exchanger sizing, and sample specifications for heat exchangers, wooden rock bins, steel tanks, concrete tanks, and fiberglass-reinforced plastic tanks.

Safety and environmental health handbook

Science.gov (United States)

,

1989-01-01

This Safety Handbook (445-1-H.) supplements the Geological Survey Safety Management Program objectives set forth in Survey Manual 445.1. Specifically, it provides a compact source of basic information to assist management and employees in preventing motor vehicle accidents, personal injuries, occupational diseases, fire, and other property damage or loss. All work situations incidental to the Geological Survey cannot be discussed in a handbook, and such complete coverage is not intended in this document. However, a wide range of subjects are covered in which a "common sense" approach to safety has been expressed. These subjects have been organized such that Chapters 1-5 address administrative issues, Chapters 6-12 address activities usually conducted within a facility, and Chapters 13-20 address field activities. No information contained in the Handbook is intended to alter any provision of any Federal law or executive order, Department of the Interior or Survey directive, or collective bargaining agreement. Questions or suggestions regarding the content of the Safety Handbook may be directed to the Survey Safety Manager, Administrative Division, Office of Facilities and Management Services, National Center, Reston, Virginia, Mail Stop 246. The previous edition of the Safety Handbook is superseded.

Nevada Test Site Radiological Control Manual, Revision 1

International Nuclear Information System (INIS)

2010-01-01

Management. The NTS has been the primary location for testing nuclear explosives in the continental United States since 1951. The topographical and geological characteristics of the NTS afford some protection to the inhabitants of the surrounding areas from potential radiation exposure as a result of release of radioactivity or contamination from nuclear testing operations. Historically, testing programs at the NTS have included atmospheric testing in the 1950s and early 1960s; underground testing in drilled, vertical holes and horizontal tunnels; earth-cratering experiments; and open air nuclear reactor and engine testing. Current activities include operating low-level radioactive and mixed waste disposal facilities for United States defense-generated waste, assembly and execution of subcritical experiments, assembly/disassembly of special experiments, the storage and use of special nuclear materials, performing criticality experiments, emergency responder training, surface cleanup and site characterization of contaminated land areas, environmental activity by the University system, and nonnuclear test operations, such as controlled spills of hazardous materials at the Hazardous Materials Spill Center. Currently, the major potential for occupational radiation exposure is associated with the burial of low-level radioactive waste and the handling of radioactive sources. Remediation of contaminated land areas may also result in radiological exposures. The Tenant Organizations (TOs) that are responsible for conducting operations, according to this manual, include National Security Technologies, LLC (NSTec), Defense Threat Reduction Agency, Desert Research Institute, Lawrence Livermore National Laboratory, Los Alamos National Laboratory, Navarro Nevada Environmental Services, LLC, Sandia National Laboratories, and WSI. These organizations operate under this manual only when they are performing activities under the purview of NNSA/NSO. To ensure that the appropriate procedures

Knowledge, attitude and practice of aspects of laboratory safety in Pathology Laboratories at the University of Port Harcourt Teaching Hospital, Nigeria.

Science.gov (United States)

Ejilemele, A A; Ojule, A C

2005-12-01

To assess current knowledge, attitudes and practice of aspects of laboratory safety in pathology laboratories at the University of Port Harcourt Teaching Hospital in view of perceived inadequacies in safety practices in clinical laboratories in developing countries. Sixty (60) self- administered questionnaires were distributed to all cadres of staff in four (4) different laboratories (Chemical Pathology, Haematology, Blood bank and Medical Microbiology) at the Hospital. Gross deficiencies were found in the knowledge, attitudes and practice of laboratory safety by laboratory staff in areas of use of personal protective equipment, specimen collection and processing, centrifuge--related hazards, infective hazards waste disposal and provision and use of First Aid Kits. Issues pertaining to laboratory safety are not yet given adequate attention by both employers and employees in developing countries in this ear of resurgence of diseases such as HIV/AIDS and Hepatitis Band C, is emphasized.

Applicability of EPRI Decommissioning Pre-Planning Manual to International Decommissioning Projects

International Nuclear Information System (INIS)

Lessard, Leo; Kay, Jim; Lefrancois, Donald; Furr, Richard; Lucas, Matthieu; Schauer, Konrad

2016-01-01

Industry models for planning the efficient decommissioning of a nuclear power plant continue to evolve. Effective planning is a key to cost control, a critical aspect of decommissioning. In 2001, the Electric Power Research Institute (EPRI) published the 'Decommissioning Pre-Planning Manual', referred to as the 'Manual'. The goal of the Manual was to develop a framework for use in pre-planning the decommissioning of a nuclear power plant. The original research was based on information collected during the active decommissioning of power reactors in New England, and the ongoing decommissioning planning of another reactor still in operation. The research team identified thirty-two (32) major Decommissioning Tasks that support the strategic and tactical planning that can be conducted in advance of plant shutdown. The Decommissioning Tasks were organized in a logical sequence of execution, and sorted in common discipline groupings. Owners of U.S. nuclear plants that have shut down prematurely during the past 5 years have found the EPRI Decommissioning Pre-Planning Manual useful in developing their transition plans from an operating to shutdown facility. Concurrently, during the past 15 years, the IAEA has published numerous technical and safety reports on nuclear reactor decommissioning planning and execution. IAEA's goal is to provide its global members with useful and timely guidance for the planning and execution of nuclear decommissioning projects. This information has been used extensively by international nuclear plant operators. One of the key objectives will be to develop a road-map linking the 32 EPRI Decommissioning Tasks with the comparable (or equivalent) topics covered in the IAEA library of decommissioning knowledge. The logical and convenient structure of the Manual will be cross-referenced to the IAEA topics to aid in organizing the development of decommissioning plans. The road-map will serve to provide a basis for improved

Aquifer thermal energy storage reference manual: seasonal thermal energy storage program

Energy Technology Data Exchange (ETDEWEB)

Prater, L.S.

1980-01-01

This is the reference manual of the Seasonal Thermal Energy Storage (STES) Program, and is the primary document for the transfer of technical information of the STES Program. It has been issued in preliminary form and will be updated periodically to include more technical data and results of research. As the program progresses and new technical data become available, sections of the manual will be revised to incorporate these data. This primary document contains summaries of: the TRW, incorporated demonstration project at Behtel, Alaska, Dames and Moore demonstration project at Stony Brook, New York, and the University of Minnesota demonstration project at Minneapolis-St. Paul, Minnesota; the technical support programs including legal/institutional assessment; economic assessment; environmental assessment; field test facilities; a compendia of existing information; numerical simulation; and non-aquifer STES concepts. (LCL)

Radiological safety problems in intracavitary brachytherapy using the manual afterloading in Venezuela

International Nuclear Information System (INIS)

Lea, D.; Gonzales, E.; Gallardo, J.; Diaz, M.

1996-01-01

In three venezuelan public hospitals it was detected radioactive contamination for Cs-137 during inspection with the wipe test technique in areas where is applied intracavitary brachytherapy using manual afterloading. This caused a condition of great stress in the personal engaged the treatments. In each Cs-137 source in these hospitals was tested leakage. The source plastic holder was analysed. The authors were able to demonstrate: a) The radioactive contamination found in the treatment area had its origin in the Cs-137 capsule corrosion and b) The corrosion in the source capsule was produced by the radiolytic degradation of the PVC tube used as source-holder in the intracavitary treatments. (authors). 3 refs., 1 tab

Nuclear and related techniques in parasitology: A laboratory manual

Energy Technology Data Exchange (ETDEWEB)

Hayunga, E.G.; Stek, M. Jr. (eds.)

1986-01-01

The course, entitled ''Atomic Energy Applications in Parasitology'', was offered by the Division of Tropical Public Health, Department of Preventive Medicine, and Biometrics, Uniformed Services University of the Health Sciences, Bethesda, Maryland. It was an intensive 3-week endeavor during which students attended lectures and acquired practical hands-on experience with the most recent laboratory tools. The course began with an exhaustive introduction to radiation physics, then encompassed a variety of practical applications including irradiation attenuation, radioisotope labeling, tracer techniques and radioimmunoassays. This laboratory manual was written by the faculty in an attempt to document the learning experience of the training course and to provide a detailed description of state-of-the-art technology with up-to-date references. Clearly, the manual has value as a historical document. However, the chapters were written with the explicit intention that they be useful to future investigators who wish to apply these methods to their particular research problem.

Requirement analysis of the safety-critical software implementation for the nuclear power plant

International Nuclear Information System (INIS)

Chang, Hoon Seon; Jung, Jae Cheon; Kim, Jae Hack; Nam, Sang Ku; Kim, Hang Bae

2005-01-01

The safety critical software shall be implemented under the strict regulation and standards along with hardware qualification. In general, the safety critical software has been implemented using functional block language (FBL) and structured language like C in the real project. Software design shall comply with such characteristics as; modularity, simplicity, minimizing the use of sub-routine, and excluding the interrupt logic. To meet these prerequisites, we used the computer-aided software engineering (CASE) tool to substantiate the requirements traceability matrix that were manually developed using Word processors or Spreadsheets. And the coding standard and manual have been developed to confirm the quality of software development process, such as; readability, consistency, and maintainability in compliance with NUREG/CR-6463. System level preliminary hazard analysis (PHA) is performed by analyzing preliminary safety analysis report (PSAR) and FMEA document. The modularity concept is effectively implemented for the overall module configurations and functions using RTP software development tool. The response time imposed on the basis of the deterministic structure of the safety-critical software was measured

Eco-Innovation Manual

DEFF Research Database (Denmark)

O'Hare, Jamie Alexander; McAloone, Tim C.; Pigosso, Daniela Cristina Antelmi

Aim of this manual is to introduce a methodology for the implementation of eco‐innovation within small and medium sized companies in developing and emerging economies. The intended audience of this manual is organizations that provide professional services to guide and support manufacturing compa...... companies to improve their sustainability performance....

A practical due diligence strategy for managing the safety of contractors

International Nuclear Information System (INIS)

Catton, C.

1998-01-01

Ontario Hydro's Fossil Business has developed and implemented a practical program to ensure that the due diligence requirements for contractors are met, particularly in the health and safety area. Companies in the power generation business are hiring contractors to protect their competitive potential by having them perform specialty work outside the core business of generating electricity. The reasons behind this trend, and the need for companies to develop comprehensive contractor safety management systems to avoid legislative liability and cost overruns, and to have contractors work safely, are examined. The main elements of Ontario Hydro's Fossil Business Contractor Safety Management Program (contractor safety policy, contractor safety manual, contractor safety training, and a contractor safety performance database) are discussed. 2 figs., 2 appendices

Writing Performance Goals: Strategy and Prototypes. A Manual for Vocational and Technical Educators.

Science.gov (United States)

McGraw-Hill Book Co., New York, NY. Gregg Div.

The result of a cooperative project of the Center for Vocational and Technical Education at the Ohio State University and the McGraw-Hill Book Company, this manual was prepared to develop prototypes of performance goals for use by curriculum specialists and developers of instructional materials in vocational and technical education and to provide…

Safety in offshore engineering an academic course covering safety in offshore wind

NARCIS (Netherlands)

Cerda Salzmann, D.J.

2011-01-01

Offshore projects are known for their challenging conditions, generally leading to high risks. Therefore no offshore project can go without a continuous and extensive assessment on safety issues. The Delft University of Technology is currently developing a course "Safety in Offshore Engineering"

Quality management for nuclear power plant operation: A manual

International Nuclear Information System (INIS)

1990-01-01

The experience from well operated nuclear power plants shows that achievement of safe, reliable and economic performance is closely related to a strong commitment and involvement by the management personnel. A system of controls is necessary to ensure that satisfactory quality in operation is achieved and maintained over the long term. The key to achieving and assuring quality lies in the ability of management to define performance objectives and to ensure that significant safety and reliability problems are prevented or detected early and resolved. This Manual has been developed by the IAEA to assist plant managers in fulfilling their responsibility with regard to the control and direction of quality and of quality assurance activities in nuclear power plant operation. It emphasizes quality objectives for nuclear power plant operation and indicates the way in which a quality system based on quality assurance principles as established in the IAEA NUSS documents can be used by managers to accomplish these objectives. Since the Manual is mainly directed at management personnel, it is presented in the form of short highlighted practices complemented by typical examples of forms and procedures. Since not all the activities under the heading of quality in operation could be covered in a single document, the activities selected for this Manual comprise those where it was felt that practical advice is generally needed. A pragmatic document useful for direct application by plant managers was the envisaged objective

NS [Nuclear Safety] update. Current safety and security activities and developments taking place in the Department of Nuclear Safety and Security. Issue no. 3, April 2007

International Nuclear Information System (INIS)

2007-04-01

This newsletter reports on the manual for first responders to a radiological emergency, the IAEA's testing laboratory for radiation measurement, monitoring and protection, which is the first UN laboratory accredited to the international standard ISO17025, and the International Conference on Lessons Learned fro the Decommissioning of Nuclear Facilities and the Safe Termination of Nuclear Activities. The IAEA, in recognition of this critical need, has developed a Manual for First Responders to a Radiological Emergency with the objective to provide practical guidance for those responding within the first few hours of a radiological emergency. This guidance document is co-sponsored by the Comite technique international de prevention et d'extinction du feu (CTIF), the Pan American Health Organization (PAHO) and the World Health Organization (WHO). The Manual for First Responders provides guidance in the form of action guides, instructions, and supporting data that can be easily applied by a State to build a basic capability to respond to a radiological emergency. The guidance also contains practical procedures and tools on the response to a radiological emergency again easily and quickly adaptable by Member States to prepare first responders to respond adequately to a radiological emergency. The Manual can be used for training purposes at the preparedness stage as well as during the response. The Policy and Programme Support Section (PPSS) within the Division of Radiation, Transport and Waste Security (NSRW) has been operating, for many years, a laboratory (the Testing Laboratory) for radiation safety monitoring of individuals and workplaces. The establishment of a quality management system, as required in the International Basic Safety Standards (the BSS), started in 2000 to cover all measurement methods of the laboratory. This system is based on the international standard ISO17025 (General requirements for the competence of testing and calibration laboratories). PPSS

Materials Handling. Module SH-01. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on materials handling is one of 50 modules concerned with job safety and health. It presents the procedures for safe materials handling. Discussed are manual handling methods (lifting and carrying by hand) and mechanical lifting (lifting by powered trucks, cranes or conveyors). Following the introduction, 15 objectives (each…

INES: The International Nuclear and Radiological Event Scale User's Manual. 2008 Edition (Spanish Edition)

International Nuclear Information System (INIS)

2010-11-01

INES, the International Nuclear and Radiological Event Scale, was developed in 1990 by experts convened by the IAEA and the OECD Nuclear Energy Agency with the aim of communicating the safety significance of events. This edition of the INES User?s Manual is designed to facilitate the task of those who are required to rate the safety significance of events using the scale. It includes additional guidance and clarifications, and provides examples and comments on the continued use of INES. With this new edition, it is anticipated that INES will be widely used by Member States and become the worldwide scale for putting into proper perspective the safety significance of any event associated with the transport, storage and use of radioactive material and radiation sources, whether or not the event occurs at a facility.

INES: The International Nuclear and Radiological Event Scale User's Manual. 2008 Edition (Chinese Edition)

International Nuclear Information System (INIS)

2012-01-01

INES, the International Nuclear and Radiological Event Scale, was developed in 1990 by experts convened by the IAEA and the OECD Nuclear Energy Agency with the aim of communicating the safety significance of events. This edition of the INES User's Manual is designed to facilitate the task of those who are required to rate the safety significance of events using the scale. It includes additional guidance and clarifications, and provides examples and comments on the continued use of INES. With this new edition, it is anticipated that INES will be widely used by Member States and become the worldwide scale for putting into proper perspective the safety significance of any event associated with the transport, storage and use of radioactive material and radiation sources, whether or not the event occurs at a facility.

Active versus passive adverse event reporting after pediatric chiropractic manual therapy: study protocol for a cluster randomized controlled trial.

Science.gov (United States)

Pohlman, Katherine A; Carroll, Linda; Tsuyuki, Ross T; Hartling, Lisa; Vohra, Sunita

2017-12-01

Patient safety performance can be assessed with several systems, including passive and active surveillance. Passive surveillance systems provide opportunity for health care personnel to confidentially and voluntarily report incidents, including adverse events, occurring in their work environment. Active surveillance systems systematically monitor patient encounters to seek detailed information about adverse events that occur in work environments; unlike passive surveillance, active surveillance allows for collection of both numerator (number of adverse events) and denominator (number of patients seen) data. Chiropractic manual therapy is commonly used in both adults and children, yet few studies have been done to evaluate the safety of chiropractic manual therapy for children. In an attempt to evaluate this, this study will compare adverse event reporting in passive versus active surveillance systems after chiropractic manual therapy in the pediatric population. This cluster randomized controlled trial aims to enroll 70 physicians of chiropractic (unit of randomization) to either passive or active surveillance system to report adverse events that occur after treatment for 60 consecutive pediatric (13 years of age and younger) patient visits (unit of analysis). A modified enrollment process with a two-phase consent procedure will be implemented to maintain provider blinding and minimize dropouts. The first phase of consent is for the provider to confirm their interest in a trial investigating the safety of chiropractic manual therapy. The second phase ensures that they understand the specific requirements for the group to which they were randomized. Percentages, incidence estimates, and 95% confidence intervals will be used to describe the count of reported adverse events in each group. The primary outcome will be the number and quality of the adverse event reports in the active versus the passive surveillance group. With 80% power and 5% one-sided significance

Manual of use and accounting of radioactive material and procedures of radiological protection for nuclear medicine

International Nuclear Information System (INIS)

Chavez, Miguel

1997-03-01

This manual of use and accounting of material radioactive and procedures of radiological safety tries to facilitate workings of protection of material radioactive in services of medicine nuclear, during diagnosis (examinations with x-rays, or those that are made in nuclear medicine), or during the processing of diseases, mainly of the carcinomas (x-ray)

FINAS. Example manual. 2

International Nuclear Information System (INIS)

Iwata, Koji; Tsukimori, Kazuyuki; Ueno, Mutsuo

2003-12-01

FINAS is a general purpose structural analysis computer program which was developed by Japan Nuclear Cycle Development Institute for the analysis of static, dynamic and thermal responses of elastic and inelastic structures by the finite element method. This manual contains typical analysis examples that illustrate applications of FINAS to a variety of structural engineering problems. The first part of this manual presents fundamental examples in which numerical solutions by FINAS are compared with some analytical reference solutions, and the second part of this manual presents more complex examples intended for practical application. All the input data images and principal results for each problem are included in this manual for beginners' convenience. All the analyses are performed by using the FINAS Version 13.0. (author)

Survey Procedures Manual for the Environmental Survey and Site Assessment Program (ESSAP). Revision 10

International Nuclear Information System (INIS)

2000-01-01

The Environmental Survey and Site Assessment Program (ESSAP) of the Oak Ridge Institute for Science and Education (ORISE) conducts radiological survey activities under a contract with the U. S. Department of Energy (DOE) and for the U.S. Nuclear Regulatory Commission (NRC). ORISE and its programs are operated by Oak Ridge Associated Universities (ORAU) through a contract with DOE. The purpose of this Procedures Manual is to provide a standardized set of procedures that document activities of the program in an auditable manner. These procedures are applicable to both DOE and NRC operations. Procedures presented in this manual are limited to those associated with site survey activities

Reliability and Maintainability Model (RAM): User and Maintenance Manual. Part 2; Improved Supportability Analysis

Science.gov (United States)

Ebeling, Charles E.

1996-01-01

This report documents the procedures for utilizing and maintaining the Reliability & Maintainability Model (RAM) developed by the University of Dayton for the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC). The purpose of the grant is to provide support to NASA in establishing operational and support parameters and costs of proposed space systems. As part of this research objective, the model described here was developed. This Manual updates and supersedes the 1995 RAM User and Maintenance Manual. Changes and enhancements from the 1995 version of the model are primarily a result of the addition of more recent aircraft and shuttle R&M data.

The FLP microsatellite platform flight operations manual

CERN Document Server

2016-01-01

This book represents the Flight Operations Manual for a reusable microsatellite platform – the “Future Low-cost Platform” (FLP), developed at the University of Stuttgart, Germany. It provides a basic insight on the onboard software functions, the core data handling system and on the power, communications, attitude control and thermal subsystem of the platform. Onboard failure detection, isolation and recovery functions are treated in detail. The platform is suited for satellites in the 50-150 kg class and is baseline of the microsatellite “Flying Laptop” from the University. The book covers the essential information for ground operators to controls an FLP-based satellite applying international command and control standards (CCSDS and ECSS PUS). Furthermore it provides an overview on the Flight Control Center in Stuttgart and on the link to the German Space Agency DLR Ground Station which is used for early mission phases. Flight procedure and mission planning chapters complement the book. .

Manual on high energy teletherapy. Incorporating: Applications guide, procedures guide, basics guide

International Nuclear Information System (INIS)

1996-01-01

This publication is part of practical radiation safety manual series for different fields of application aimed primarily at persons handling radiation sources on a daily routine basis, which could at same time be used by the competent authorities, supporting their efforts in the radiation protection training of workers or medical assistance personnel or helping on-site management to set up local radiation protection rules. It is dedicated to high energy radiotherapy: its application and procedures guides

Safety Evaluation Report related to the renewal of the operating license for the TRIGA training and research reactor at the University of Utah (Docket No. 50-407)

International Nuclear Information System (INIS)

1985-03-01

This Safety Evaluation Report for the application filed by the University of Utah (UU) for a renewal of operating license R-126 to continue to operate a training and research reactor facility has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is owned and operated by the University of Utah and is located on its campus in Salt Lake City, Salt Lake County, Utah. The staff concludes that this training reactor facility can continue to be operated by UU without endangering the health and safety of the public

Colonising Safety : creating risk through the enforcement of biomedical constructions of safety.

NARCIS (Netherlands)

Kadetz, P.

2013-01-01

In the normative health care discourse, safety is represented as a concept that is at once universal, irrefutable, and inherently beneficent. Yet, research at local levels in the Philippines challenges these assumptions embedded in the biomedical construction of safety. This article examines how the

Manual hyperinflation in airway clearance in pediatric patients: a systematic review

Science.gov (United States)

de Godoy, Vanessa Cristina Waetge Pires; Zanetti, Nathalia Mendonça; Johnston, Cíntia

2013-01-01

Objective To perform an assessment of the available literature on manual hyperinflation as a respiratory physical therapy technique used in pediatric patients, with the main outcome of achieving airway clearance. Methods We reviewed articles included in the Lilacs (Latin American and Caribbean Literature on Health Sciences/Literatura Latino Americana e do Caribe em Ciências da Saúde), Cochrane Library, Medline (via Virtual Health Library and PubMed), SciELO (Scientific Electronic Library), and PEDro (Physiotherapy Evidence Database) databases from 2002 to 2013 using the following search terms: "physiotherapy (techniques)", "respiratory therapy", "intensive care", and "airway clearance". The selected studies were classified according to the level of evidence and grades of recommendation (method of the Oxford Centre for Evidence-Based Medicine) by two examiners, while a third examiner repeated the search and analysis and checked the classification of the articles. Results Three articles were included for analysis, comprising 250 children (aged 0 to 16 years). The main diagnoses were acute respiratory failure, recovery following heart congenital disease and upper abdominal surgery, bone marrow transplantation, asthma, tracheal reconstruction, brain injury, airway injury, and heterogeneous lung diseases. The studies were classified as having a level of evidence 2C and grade of recommendation C. Conclusions Manual hyperinflation appeared useful for airway clearance in the investigated population, although the evidence available in the literature remains insufficient. Therefore, controlled randomized studies are needed to establish the safety and efficacy of manual hyperinflation in pediatric patients. However, manual hyperinflation must be performed by trained physical therapists only. PMID:24213091

Examples for simple solutions in using manual ultrasonic testing with partial mechanisation

International Nuclear Information System (INIS)

Prestel, W.; Meyer, H.J.; Weiss, M.

1989-01-01

Fully automatic ultrasonic testing regarding test technique, manipulation and evaluation can only be used economically if one is either testing large number of parts or if manual testing of safety-related components is impossible because of inaccessibility, e.g.: for primary circuit components of nuclear powerstations. The described examples (multi-layer ceramic condensers, turbine rotors, cast steel components, central holes in forged shafts, weld seams and piston bolts) show that by individually designed and, where necessary, computer-aided part-mechanisation, ultrasonic testing is able to combine high probability of finding faults in the interests of the greatest possible operating safety and the requirement for the description or documentation of the fault suitable for the required case with the necessity for economical testing. (orig./MM) [de

Nevada National Security Site Radiological Control Manual

International Nuclear Information System (INIS)

2012-01-01

This document supersedes DOE/NV/25946--801, 'Nevada Test Site Radiological Control Manual,' Revision 1 issued in February 2010. Brief Description of Revision: A complete revision to reflect a recent change in name for the NTS; changes in name for some tenant organizations; and to update references to current DOE policies, orders, and guidance documents. Article 237.2 was deleted. Appendix 3B was updated. Article 411.2 was modified. Article 422 was re-written to reflect the wording of DOE O 458.1. Article 431.6.d was modified. The glossary was updated. This manual contains the radiological control requirements to be used for all radiological activities conducted by programs under the purview of the U.S. Department of Energy (DOE) and the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO). Compliance with these requirements will ensure compliance with Title 10 Code of Federal Regulations (CFR) Part 835, 'Occupational Radiation Protection.' Programs covered by this manual are located at the Nevada National Security Site (NNSS); Nellis Air Force Base and North Las Vegas, Nevada; Santa Barbara and Livermore, California; and Andrews Air Force Base, Maryland. In addition, fieldwork by NNSA/NSO at other locations is covered by this manual. Current activities at NNSS include operating low-level radioactive and mixed waste disposal facilities for United States defense-generated waste, assembly and execution of subcritical experiments, assembly/disassembly of special experiments, the storage and use of special nuclear materials, performing criticality experiments, emergency responder training, surface cleanup and site characterization of contaminated land areas, environmental activity by the University system, and nonnuclear test operations, such as controlled spills of hazardous materials at the Hazardous Materials Spill Center. Currently, the major potential for occupational radiation exposure is associated with the burial of

Nevada National Security Site Radiological Control Manual

Energy Technology Data Exchange (ETDEWEB)

Radiological Control Managers’ Council

2012-03-26

This document supersedes DOE/NV/25946--801, 'Nevada Test Site Radiological Control Manual,' Revision 1 issued in February 2010. Brief Description of Revision: A complete revision to reflect a recent change in name for the NTS; changes in name for some tenant organizations; and to update references to current DOE policies, orders, and guidance documents. Article 237.2 was deleted. Appendix 3B was updated. Article 411.2 was modified. Article 422 was re-written to reflect the wording of DOE O 458.1. Article 431.6.d was modified. The glossary was updated. This manual contains the radiological control requirements to be used for all radiological activities conducted by programs under the purview of the U.S. Department of Energy (DOE) and the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO). Compliance with these requirements will ensure compliance with Title 10 Code of Federal Regulations (CFR) Part 835, 'Occupational Radiation Protection.' Programs covered by this manual are located at the Nevada National Security Site (NNSS); Nellis Air Force Base and North Las Vegas, Nevada; Santa Barbara and Livermore, California; and Andrews Air Force Base, Maryland. In addition, fieldwork by NNSA/NSO at other locations is covered by this manual. Current activities at NNSS include operating low-level radioactive and mixed waste disposal facilities for United States defense-generated waste, assembly and execution of subcritical experiments, assembly/disassembly of special experiments, the storage and use of special nuclear materials, performing criticality experiments, emergency responder training, surface cleanup and site characterization of contaminated land areas, environmental activity by the University system, and nonnuclear test operations, such as controlled spills of hazardous materials at the Hazardous Materials Spill Center. Currently, the major potential for occupational radiation exposure is associated with the burial of

Risk monitor - a tool for operational safety assessment risk monitor - user's manual

International Nuclear Information System (INIS)

Hari Prasad, M.; Vinod, Gopika; Saraf, R.K.; Ghosh, A.K.

2006-06-01

Probabilistic Safety Assessment has become a key tool as on today to identify and understand Nuclear Power Plant vulnerabilities. As a result of the availability of these PSA studies, there is a desire to use them to enhance plant safety and to operate the nuclear stations in the most efficient manner. Risk Monitor is a PC based tool, which computes the real time safety level and assists plant personnel to manage day-to-day activities. Risk Monitor is a PC based user friendly software tool used for modification and re-analysis of a nuclear Power plant. Operation of Risk Monitor is based on PSA methods for assisting in day to day applications. Risk Monitoring programs can assess the risk profile and are used to optimize the operation of Nuclear Power Plants with respect to a minimum risk level over the operating time. This report presents the background activities of Risk Monitor, its application areas and the step by step procedure for the user.to interact with the software. This software can be used with the PSA model of any Nuclear Power Plant. (author)

Software safety analysis practice in installation phase

Energy Technology Data Exchange (ETDEWEB)

Huang, H. W.; Chen, M. H.; Shyu, S. S., E-mail: hwhwang@iner.gov.t [Institute of Nuclear Energy Research, No. 1000 Wenhua Road, Chiaan Village, Longtan Township, 32546 Taoyuan County, Taiwan (China)

2010-10-15

This work performed a software safety analysis in the installation phase of the Lung men nuclear power plant in Taiwan, under the cooperation of Institute of Nuclear Energy Research and Tpc. The US Nuclear Regulatory Commission requests licensee to perform software safety analysis and software verification and validation in each phase of software development life cycle with Branch Technical Position 7-14. In this work, 37 safety grade digital instrumentation and control systems were analyzed by failure mode and effects analysis, which is suggested by IEEE standard 7-4.3.2-2003. During the installation phase, skew tests for safety grade network and point to point tests were performed. The failure mode and effects analysis showed all the single failure modes can be resolved by the redundant means. Most of the common mode failures can be resolved by operator manual actions. (Author)

Software safety analysis practice in installation phase

International Nuclear Information System (INIS)

Huang, H. W.; Chen, M. H.; Shyu, S. S.

2010-10-01

This work performed a software safety analysis in the installation phase of the Lung men nuclear power plant in Taiwan, under the cooperation of Institute of Nuclear Energy Research and Tpc. The US Nuclear Regulatory Commission requests licensee to perform software safety analysis and software verification and validation in each phase of software development life cycle with Branch Technical Position 7-14. In this work, 37 safety grade digital instrumentation and control systems were analyzed by failure mode and effects analysis, which is suggested by IEEE standard 7-4.3.2-2003. During the installation phase, skew tests for safety grade network and point to point tests were performed. The failure mode and effects analysis showed all the single failure modes can be resolved by the redundant means. Most of the common mode failures can be resolved by operator manual actions. (Author)

SRC-I demonstration plant analytical laboratory methods manual. Final technical report

Energy Technology Data Exchange (ETDEWEB)

Klusaritz, M.L.; Tewari, K.C.; Tiedge, W.F.; Skinner, R.W.; Znaimer, S.

1983-03-01

This manual is a compilation of analytical procedures required for operation of a Solvent-Refined Coal (SRC-I) demonstration or commercial plant. Each method reproduced in full includes a detailed procedure, a list of equipment and reagents, safety precautions, and, where possible, a precision statement. Procedures for the laboratory's environmental and industrial hygiene modules are not included. Required American Society for Testing and Materials (ASTM) methods are cited, and ICRC's suggested modifications to these methods for handling coal-derived products are provided.

Fire safety in dental clinics: Basics for dentists and dental students

Directory of Open Access Journals (Sweden)

Kalyana Chakravarthy Pentapati

2015-01-01

Full Text Available Fire safety is essential component and requirement in health care sector. It includes components like emergency exits, manual call outs, different types of fire extinguishers, safe assembly area, fire hydrant system with water sprinkler systems etc. We attempt to provide some basics about fire and fire safety that are prerequisite for safe working environment in dental clinics along with some recommendations that can be incorporated in the curriculum.

ACT Plan: Technical Manual. 2013/2014

Science.gov (United States)

ACT, Inc., 2013

2013-01-01

This manual contains information about the American College Test (ACT) Plan® program. The principal focus of this manual is to document the Plan program's technical adequacy in light of its intended purposes. This manual supersedes the 2011 edition. The content of this manual responds to requirements of the testing industry as established in the…

Safety evaluation report related to the renewal of the operating license for the research reactor at North Carolina State University

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-04-01

This safety evaluation report (SER) summarizes the findings of a safety review conducted by the staff of the U.S. Nuclear Regulatory Commission (NRC), Office of Nuclear Reactor Regulation (NRR). The staff conducted this review in response to a timely application filed by North Carolina State University (the licensee or NCSU) for a 20-year renewal of Facility Operating License R-120 to continue to operate the NCSU PULSTAR research reactor. The facility is located in the Burlington Engineering Laboratory complex on the NCSU campus in Raleigh, North Carolina. In its safety review, the staff considered information submitted by the licensee (including past operating history recorded in the licensee`s annual reports to the NRC), as well as inspection reports prepared by NRC Region H personnel and first-hand observations. On the basis of this review, the staff concludes that NCSU can continue to operate the PULSTAR research reactor, in accordance with its application, without endangering the health and safety of the public. 16 refs., 31 figs., 7 tabs.

Safety evaluation report related to the renewal of the operating license for the research reactor at North Carolina State University

International Nuclear Information System (INIS)

1997-04-01

This safety evaluation report (SER) summarizes the findings of a safety review conducted by the staff of the U.S. Nuclear Regulatory Commission (NRC), Office of Nuclear Reactor Regulation (NRR). The staff conducted this review in response to a timely application filed by North Carolina State University (the licensee or NCSU) for a 20-year renewal of Facility Operating License R-120 to continue to operate the NCSU PULSTAR research reactor. The facility is located in the Burlington Engineering Laboratory complex on the NCSU campus in Raleigh, North Carolina. In its safety review, the staff considered information submitted by the licensee (including past operating history recorded in the licensee's annual reports to the NRC), as well as inspection reports prepared by NRC Region H personnel and first-hand observations. On the basis of this review, the staff concludes that NCSU can continue to operate the PULSTAR research reactor, in accordance with its application, without endangering the health and safety of the public. 16 refs., 31 figs., 7 tabs

Ionising radiation safety training in the Australian Defence Organisation (ADO)

International Nuclear Information System (INIS)

Jenks, G.J.; O'Donovan, E.J.B.; Wood, W.B.

1998-01-01

Training personnel in ionising radiation safety within the Australian Defence Organisation (ADO) requires addressing some unique features of an organisation employing both military and civilian personnel. Activities may include those of a civil nature (such as industrial and medical radiography), specific military requirements (for training and emergency response) and scientific research and development. Some personnel may be assigned to full-time duties associated with radiation. However, most are designated as radiation protection officers as a secondary duty. A further complication is that most military personnel are subjected to postings at regular intervals. The ADO's Directorate of Defence Occupational Health and Safety has established an Ionising Radiation Safety Subcommittee to monitor not only the adequacy of the internal Ionising Radiation Safety Manual but also the training requirements. A Training Course, responding to these requirements, has been developed to emphasize, basic radiation theory and protection, operation of radiation monitors available in the ADO, an understanding of the Ionising Radiation Safety Manual, day-to-day radiation safety in units and establishments, and appropriate responses to radiation accidents and emergencies. In addition, students are briefed on a limited number of peripheral topics and participate in some site visits. Currently, two Courses are held annually, each with about twenty students. Most of the material is presented by ADO personnel with external contractor support. The three Courses held to date have proved successful, both for the students and the ADO generally. To seek national accreditation of the course through the Australian National Training Authority, as a first step, competency standards have been proposed. (authors)

IS MANUAL THERAPY A RATIONAL APPROACH TO IMPROVING HEALTH-RELATED QUALITY OF LIFE IN PEOPLE WITH ARTHRITIS?

Science.gov (United States)

Cameron, Melainie

2002-01-01

Background: People with arthritic disease are advised to participate in gentle exercise on a regular basis, and pursue long-term medication regimes. Alternative therapies are also used by people with arthritis, and may sometimes be recommended by rheumatologists and other medical personnel. Alternative therapies may be divided into two types: active therapies, in which the patient takes a driving role, and passive therapies, in which the therapy cannot proceed unless driven by a therapist. Objective: To review the effectiveness of manual therapy in improving the health-related quality of life (HRQOL) of people with two common arthritis conditions: Osteoarthritis and rheumatoid arthritis. Discussion: Massage, and other passive (practitioner-driven) manual therapies, have been anecdotally reported to improve health-related quality of life (HRQOL) in people with arthritis. Many manual therapists consult with patients who have arthritic diseases, receive referrals from rheumatologists, and consider the arthritic diseases to be within their field of practise. Although there is empirical evidence that manual therapy with some types of arthritis is beneficial, the level of effectiveness however is under-researched. Medical authorities are reluctant to endorse manual therapies for arthritis due to a lack of scientific evidence demonstrating efficacy, safety, and cost effectiveness. PMID:17987169

Assessing the safety attitudes questionnaire (SAQ), German language version in Swiss university hospitals - a validation study

Science.gov (United States)

2013-01-01

Background Improving patient safety has become a major focus of clinical care and research over the past two decades. An institution’s patient safety climate represents an essential component of ensuring a safe environment and thereby can be vital to the prevention of adverse events. Covering six patient safety related factors, the Safety Attitudes Questionnaire (SAQ) is a validated and widely used instrument to measure the patient safety climate in clinical areas. The objective of this study was to assess the psychometric properties of the German language version of the SAQ. Methods A survey was carried out in two University Hospitals in Switzerland in autumn 2009 where the SAQ was distributed to a sample of 406 nurses and physicians in medical and surgical wards. Following the American Educational Research Association guidelines, we tested the questionnaire validity by levels of evidence: content validity, internal structure and relations to other variables. Confirmatory factor analysis was used to examine factor structure. Cronbach’s alphas and inter-item correlations were calculated to examine internal consistency reliability. Results A total of 319 questionnaires were completed representing an overall response rate of 78.6%. For three items, the item content validity index was <0.75. Confirmatory factor analysis showed acceptable model fit (RMSEA = 0.045; CFI = 0.944) for the six-factor model. Additional exploratory factor analysis could not identify a better factor model. SAQ factor scores showed positive correlations with the Safety Organizing Scale (r = .56 - .72). The SAQ German version showed moderate to strong internal consistency reliability indices (Cronbach alpha = .65 - .83). Conclusions The German language version of the SAQ demonstrated acceptable to good psychometric properties and therefore shows promise to be a sound instrument to measure patient safety climate in Swiss hospital wards. However, the low item content validity and large number

Manual of radioisotope production

International Nuclear Information System (INIS)

1966-01-01

The Manual of Radioisotope Production has been compiled primarily to help small reactor establishments which need a modest programme of radioisotope production for local requirements. It is not comprehensive, but gives guidance on essential preliminary considerations and problems that may be met in the early stages of production. References are included as an aid to the reader who wishes to seek further in the extensive literature on the subject. In preparing the Manual, which is in two parts, the Agency consulted several Member States which already have long experience in radioisotope production. An attempt has been made to condense this experience, firstly, by setting out the technical and economic considerations which govern the planning and execution of an isotope programme and, secondly, by providing experimental details of isotope production processes. Part I covers topics common to all radioisotope processing, namely, laboratory design, handling and dispensing of radioactive solutions, quality control, measurement and radiological safety. Part II contains information on the fifteen radioisotopes in most common use. These are bromine-82, cobalt-58, chromium-51, copper-64, fluorine-18, gold-198, iodine-131, iron-59, magnesium-28, potassium-42, sodium-24, phosphorus-32, sulphur-35, yttrium-90 and zinc-65. Their nuclear properties are described, references to typical applications are given and published methods of production are reviewed; also included are descriptions in detail of the production processes used at several national atomic energy organizations. No attempt has been made to distinguish the best values for nuclear data or to comment on the relative merits of production processes. Each process is presented essentially as it was described by the contributor on the understanding that critical comparisons are not necessary for processes which have been well tried in practical production for many years. The information is presented as a guide to enable

Two phase heuristic algorithm for the university course timetabling

African Journals Online (AJOL)

Mgina

Department of Mathematics, Box 35062, University of Dar es salaam, Tanzania ... and rooms to a number of timeslots over a planning horizon, normally a week, while ... Solutions have been generated which greatly outperform the manually ...

GRACE manual

International Nuclear Information System (INIS)

Ishikawa, T.; Kawabata, S.; Shimizu, Y.; Kaneko, T.; Kato, K.; Tanaka, H.

1993-02-01

This manual is composed of three kinds of objects, theoretical background for calculating the cross section of elementary process, usage and technical details of the GRACE system. Throughout this manual we take the tree level process e + e - → W + W - γ as an example, including the e ± -scalar boson interactions. The real FORTRAN source code for this process is attached in the relevant sections as well as the results of calculation, which might be a great help for understanding the practical use of the system. (J.P.N.)

Wet--But Safe. A Classroom Course in Water Safety and Survival.

Science.gov (United States)

Michigan State Dept. of Natural Resources, Lansing.

This manual is designed for use in elementary school systems that do not have a swimming pool available. It contains eight classroom sessions and provides a core of information in basic water safety, water survival, and water rescue. (JD)

EML procedures manual

International Nuclear Information System (INIS)

Volchok, H.L.; de Planque, G.

1982-01-01

This manual contains the procedures that are used currently by the Environmental Measurements Laboratory of the US Department of Energy. In addition a number of analytical methods from other laboratories have been included. These were tested for reliability at the Battelle, Pacific Northwest Laboratory under contract with the Division of Biomedical and Environmental Research of the AEC. These methods are clearly distinguished. The manual is prepared in loose leaf form to facilitate revision of the procedures and inclusion of additional procedures or data sheets. Anyone receiving the manual through EML should receive this additional material automatically. The contents are as follows: (1) general; (2) sampling; (3) field measurements; (4) general analytical chemistry; (5) chemical procedures; (6) data section; (7) specifications

Partners Plus: Families and Caregivers in Partnerships. A Family-Centered Guide to Respite Care. Trainer's Workshop Manual [and] Community Planning Manual [and] A Family Manual [and] Caregiver Manual.

Science.gov (United States)

Ownby, Lisa L.; Hooke, Amanda C.; Moore, Dee Wylie; Garland, Corinne W.; Frank, Adrienne

Four manuals on implementing the Partners Respite Model, which provides respite care for children with disabilities or chronic illnesses, comprise this document. The Community Planning Manual offers a step-by-step guide to replication of the Partners Respite Model and is divided into sections on developing the Partners program, implementing the…

Operator's Manual for SHEBA Powered Tether Balloon System

Science.gov (United States)

Lappen, Cara-Lyn; Randall, David A.

1998-01-01

The Surface Heat and Energy Budget of the Arctic (SHEBA) was an intensive field project which took place in the Arctic Ocean from October 1997 through October 1998. Its purpose was to measure as many facets of the Arctic environment as possible so that we would be able to better understand the interaction between the ice, atmosphere, and ocean and their interactions with global climate. One aspect of the atmospheric field component was launching tethered balloons to monitor the profiles of temperature, wind, pressure, and humidity, as well as examine the vertical structure of cloud droplet sizes and distributions. The tethered balloon that we used was one specially designed for use in freezing climates by SPEC Corporation in Boulder, Colorado. A special winch that was able to withstand Arctic temperature and weather became necessary when the testing of simple winch systems used in warmer climates failed under these extreme conditions. The purpose of this manual is to acquaint any new user to the powered tethered balloon system deployed at the The Surface Heat and Energy Budget of the Arctic (SHEBA ice camp. It includes a description of the preparations necessary to get ready for a launch, the mechanics of the actual launch, and an account of the proper procedure for taking down the equipment when finished. It will also include tips on how to minimize potential equipment failures, some trouble shooting, and some safety ideas. This manual is designed so that new operators can use the system with minimal previous training. At the end of this manual, the reader will find a quick checklist.

Kansas State University Libraries' OCR Labeling Project.

Science.gov (United States)

Thierer, Joyce; Bower, Merry

This publication describes the planning and implementation of an optical character recognition (OCR) labeling project, the first stage of Kansas State University (KSU) Libraries' program of conversion from a manual to an automated circulation system. It is noted that a telephone survey of libraries with automated circulation systems and…

Laboratory training manual on the use of nuclear techniques in pesticide research

International Nuclear Information System (INIS)

1983-01-01

This is a laboratory training manual on the use of nuclear techniques, and in particular radioisotopes in pesticide research. It is designed to give the scientists involved in pesticide research the basic terms and principles for understanding ionizing radiation: detection and measurement its hazards and safety measures, and some of the more common applications. Laboratory exercises representing the types of experiments that are valuable in pesticide research programmes and field tests which demonstrate the use of radiolabelled pesticides are included

The ISIS Open GENIE user manual

International Nuclear Information System (INIS)

Akeroyd, F.A.; Ashworth, R.L.; Campbell, S.I.; Johnston, S.D.; Martin, J.M.; Moreton-Smith, C.M.; Sivia, D.S.

2000-01-01

This manual should enable you to become familiar with Open GENIE quickly and easily. It therefore complements the Open GENIE Reference Manual which should be used to understand the full meaning of Open GENIE commands. The reference manual is accessible on the ISIS web server at: http://www.isis.rl.ac.uk/GENIEReferenceManual/ and the user manual is planned to be accessible by January '98 at http://www.isis.rl.ac.ukIGENIEUserManual/. The Open GENIE User Manual is separated into two parts: Part A. The User Manual. An introduction to the use of Open GENIE. Part B. The Installation Guide. General information on how to install and run Open GENIE. Assuming that you are new to Open GENIE and have just downloaded a copy you will need to consult the Installation Guide to get Open GENIE installed on your machine. After this we recommend you experiment with some of the example files to get an idea of the capabilities of Open GENIE. For further information, comments, additions of routines that you feel should be included, please contact us at genie at isise.rl.ac.uk

The operation and maintenance manual

International Nuclear Information System (INIS)

Stoll, A.; Krotil, H.; Klein, W.

1976-01-01

The operating manual is one of many technical documents which the nuclear power plant operator needs for ensuring safe operation. For the operating staff, however, there is only one document, namely the operating manual. The operating manual is an essential element in bringing man and machine in harmony. This is necessary for safe and, as far as possible, uninterrupted operation of the power plant. The operating manual is the only document containing binding instructions for plant operation. All the tasks of plant operation which are carried out by plant staff are described in the operating manual in a form which is as clear and comprehensible as possible. A considerable number of these tasks can only be carried out by man, namely: 1) tasks concerning operational organization, 2) all non-automated areas of plant operation. (orig./TK) [de

Consensus statement: patient safety, healthcare-associated infections and hospital environmental surfaces.

Science.gov (United States)

Roques, Christine; Al Mousa, Haifaa; Duse, Adriano; Gallagher, Rose; Koburger, Torsten; Lingaas, Egil; Petrosillo, Nicola; Škrlin, Jasenka

2015-01-01

Healthcare-associated infections have serious implications for both patients and hospitals. Environmental surface contamination is the key to transmission of nosocomial pathogens. Routine manual cleaning and disinfection eliminates visible soil and reduces environmental bioburden and risk of transmission, but may not address some surface contamination. Automated area decontamination technologies achieve more consistent and pervasive disinfection than manual methods, but it is challenging to demonstrate their efficacy within a randomized trial of the multiple interventions required to reduce healthcare-associated infection rates. Until data from multicenter observational studies are available, automated area decontamination technologies should be an adjunct to manual cleaning and disinfection within a total, multi-layered system and risk-based approach designed to control environmental pathogens and promote patient safety.

Importance of the documentation of the manual of quality and procedures handbook in the nuclear technology center

International Nuclear Information System (INIS)

Domech More, J.; Bolanos Hernandez, R.; Quitero Rosello, R.; Fernandez Rondon, M.; Milian Lorenzo, D.; Rodriguez Gual, M.

1997-01-01

In the present work is presented the methodology used for the elaboration of manual of quality of the Nuclear Technology Center and the technical Procedures Handbook for the execution of Preliminary Safety report of the Juragua Nuclear Power Plant, as well as the importance that has this documentation for the work of the center

Quality assurance program manual for nuclear power plants. Volume I. Policies

International Nuclear Information System (INIS)

1975-01-01

Policies and procedures are presented which comply with current NRC regulatory requirements and industry codes and standards in effect during the design, procurement, construction, testing, operation, refueling, maintenance, repair and modification activities associated with nuclear power plants. Specific NRC and industry documents that contain the requirements, including the issue dates in effect, are identified in each nuclear power plant's Safety Analysis Report. The requirements established by these documents form the basis for the Consumers Power Quality Assurance Program, which is implemented to control those structures, systems, components and operational safety actions listed in each nuclear power plant's Quality List (Q-List). As additional and revised requirements are issued by the NRC and professional organizations involved in nuclear activities, they will be reviewed for their impact on this manual, and changes will be made where considered necessary

ARS-Media for excel instruction manual

Science.gov (United States)

ARS-Media for Excel Instruction Manual is the instruction manual that explains how to use the Excel spreadsheet ARS-Media for Excel application. ARS-Media for Excel Instruction Manual is provided as a pdf file....

Software safety analysis application in installation phase

International Nuclear Information System (INIS)

Huang, H. W.; Yih, S.; Wang, L. H.; Liao, B. C.; Lin, J. M.; Kao, T. M.

2010-01-01

This work performed a software safety analysis (SSA) in the installation phase of the Lungmen nuclear power plant (LMNPP) in Taiwan, under the cooperation of INER and TPC. The US Nuclear Regulatory Commission (USNRC) requests licensee to perform software safety analysis (SSA) and software verification and validation (SV and V) in each phase of software development life cycle with Branch Technical Position (BTP) 7-14. In this work, 37 safety grade digital instrumentation and control (I and C) systems were analyzed by Failure Mode and Effects Analysis (FMEA), which is suggested by IEEE Standard 7-4.3.2-2003. During the installation phase, skew tests for safety grade network and point to point tests were performed. The FMEA showed all the single failure modes can be resolved by the redundant means. Most of the common mode failures can be resolved by operator manual actions. (authors)

SSC-K code users manual (rev.1)

International Nuclear Information System (INIS)

Kwon, Y. M.; Lee, Y. B.; Chang, W. P.; Hahn, D.

2002-01-01

The Supper System Code of KAERI (SSC-K) is a best-estimate system code for analyzing a variety of off-normal or accidents in the heat transport system of a pool type LMR design. It is being developed at Korea Atomic Energy Research Institution (KAERI) on the basis of SSC-L, originally developed at BNL to analyze loop-type LMR transients. SSC-K can handle both designs of loop and pool type LMRs. SSC-K contains detailed mechanistic models of transient thermal, hydraulic, neutronic, and mechanical phenomena to describe the response of the reactor core, coolant, fuel elements, and structures to accident conditions. This report provides a revised User's Manual (rev.1) of the SSC-K computer code, focusing on phenomenological model descriptions for new thermal, hydraulic, neutronic, and mechanical modules. A comprehensive description of the models for pool-type reactor is given in Chapters 2 and 3; the steady-state plant characterization, prior to the initiation of transient is described in Chapter 2 and their transient counterparts are discussed in Chapter 3. Discussions on the intermediate heat exchanger (IHX) and the electromagnetic (EM) pump are described in Chapter 4 and 5, respectively. A model of passive safety decay heat removal system (PSDRS) is discussed in Chapter 6, and models for various reactivity feedback effects are discussed in Chapter 7. In Chapter 8, constitutive laws and correlations required to execute the SSC-K are described. New models developed for SSC-K rev.1 are two dimensional hot pool model in Chapter 9, and long term cooling model in Chapter 10. Finally, a brief description of MINET code adopted to simulate BOP is presented in Chapter 11. Based on test runs for typical LMFBR accident analyses, it was found that the present version of SSC-K would be used for the safety analysis of KALIMER. However, the further validation of SSC-K is required for real applications. It is noted that the user's manual of SSC-K will be revised later with the

A Laboratory Safety Program at Delaware.

Science.gov (United States)

Whitmyre, George; Sandler, Stanley I.

1986-01-01

Describes a laboratory safety program at the University of Delaware. Includes a history of the program's development, along with standard safety training and inspections now being implemented. Outlines a two-day laboratory safety course given to all graduate students and staff in chemical engineering. (TW)

Salinas : theory manual.

Energy Technology Data Exchange (ETDEWEB)

Walsh, Timothy Francis; Reese, Garth M.; Bhardwaj, Manoj Kumar

2011-11-01

Salinas provides a massively parallel implementation of structural dynamics finite element analysis, required for high fidelity, validated models used in modal, vibration, static and shock analysis of structural systems. This manual describes the theory behind many of the constructs in Salinas. For a more detailed description of how to use Salinas, we refer the reader to Salinas, User's Notes. Many of the constructs in Salinas are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Salinas are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programmer notes manual, the user's notes and of course the material in the open literature.

Surgical Safety Training of World Health Organization Initiatives.

Science.gov (United States)

Davis, Christopher R; Bates, Anthony S; Toll, Edward C; Cole, Matthew; Smith, Frank C T; Stark, Michael

2014-01-01

Undergraduate training in surgical safety is essential to maximize patient safety. This national review quantified undergraduate surgical safety training. Training of 2 international safety initiatives was quantified: (1) World Health Organization (WHO) "Guidelines for Safe Surgery" and (2) Department of Health (DoH) "Principles of the Productive Operating Theatre." Also, 13 additional safety skills were quantified. Data were analyzed using Mann-Whitney U tests. In all, 23 universities entered the study (71.9% response). Safety skills from WHO and DoH documents were formally taught in 4 UK medical schools (17.4%). Individual components of the documents were taught more frequently (47.6%). Half (50.9%) of the additional safety skills identified were taught. Surgical societies supplemented safety training, although the total amount of training provided was less than that in university curricula (P < .0001). Surgical safety training is inadequate in UK medical schools. To protect patients and maximize safety, a national undergraduate safety curriculum is recommended. © 2013 by the American College of Medical Quality.

TJ-II Library Manual (Version 2)

International Nuclear Information System (INIS)

Tribaldos, V.; Milligen, B. Ph. van; Lopez-Fraguas, A.

2001-01-01

This is a manual of use of the TJ2 Numerical Library that has been developed for making numerical computations of different TJ-II configurations. This manual is a new version of the earlier manual CIEMAT report 806. (Author)

Global Communication with Icons : Hotel Safety as an Environmental Context

OpenAIRE

Heimbürger, Anneli; Khanom, Sukanya

2015-01-01

Icons are small signs with fixed meanings. Icons are usually context specific. For example in the context of a hotel, the client can often find icons in hotel room books and safety guides. Scandic Hotel chain, for example, currently provides the manual for its safety system in 14 languages. There are at least two major shortcomings of this system: (1) in emergency or panic situations, it is very difficult to find your own language from the leaflet, and (2) there are no Asian ...

[Does annual simulation training influence the safety climate of a university hospital? : Prospective 5‑year investigation using dimensions of the safety attitude questionnaire].

Science.gov (United States)

St Pierre, M; Gall, C; Breuer, G; Schüttler, J

2017-12-01

Simulation-based training with a focus on non-technical skills can have a positive influence on safety relevant attitudes of participants. If an organization succeeds in training sufficient staff, it may experience a positive change in the safety climate. As the effects of a single training are of a transient nature, annual training sessions may lead to an incremental improvement of safety relevant attitudes of employees over time. In spring 2012 the Department of Anesthesia at the University Hospital of Erlangen established an annual simulation-based training for staff members (e.g. consultants, trainee anesthetists and nurse anesthetists). The study aimed to test whether an annual simulation-based training would result in an incremental longitudinal improvement in attitudes towards teamwork, safety and stress recognition. A survey comprising three domains (teamwork climate, safety climate and stress recognition) of the safety attitudes questionnaire (SAQ) and items addressing briefing and speaking up was distributed to all participants in an annual in-house simulation training. Participants filled out the questionnaire in the morning of each training day. The attitudes were measured before the first training series in 2012, 6 months after the first training and then every year (2013-2016). Participants generated a personalized identification code which allowed individuals to be anonymously tracked over time. Results of the 5‑point Likert scale were transformed to a 100-point scale. Results were calculated at the group level and at the individual level. Univariable linear regression was used to calculate mean changes per year. Over a period of 5 years (2012-2016) a total of 255 individuals completed the questionnaire. Each year, 14-20% of all nurse anesthetists and 81-90% of all anesthetists participated in the simulation-based training. As a result of annual staff turnover 16-24% of participants were new staff members. A personalized code allowed the

Joint FAM/Line Management Assessment Report on LLNL Machine Guarding Safety Program

Energy Technology Data Exchange (ETDEWEB)

Armstrong, J. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-07-19

The LLNL Safety Program for Machine Guarding is implemented to comply with requirements in the ES&H Manual Document 11.2, "Hazards-General and Miscellaneous," Section 13 Machine Guarding (Rev 18, issued Dec. 15, 2015). The primary goal of this LLNL Safety Program is to ensure that LLNL operations involving machine guarding are managed so that workers, equipment and government property are adequately protected. This means that all such operations are planned and approved using the Integrated Safety Management System to provide the most cost effective and safest means available to support the LLNL mission.

Safety in laboratories: Indian scenario.

Science.gov (United States)

Mustafa, Ajaz; Farooq, A Jan; Qadri, Gj; S A, Tabish

2008-07-01

Health and safety in clinical laboratories is becoming an increasingly important subject as a result of emergence of highly infectious diseases such as Hepatitis and HIV. A cross sectional study was carried out to study the safety measures being adopted in clinical laboratories of India. Heads of laboratories of teaching hospitals of India were subjected to a standardized, pretested questionnaire. Response rate was 44.8%. only 60% of laboratories had person in-charge of safety in laboratory. Seventy three percent of laboratories had safety education program regarding hazards. In 91% of laboratories staff is using protective clothing while working in laboratories. Hazardous material regulations are followed in 78% of laboratories. Regular health check ups are carried among laboratory staff in 43.4% of laboratories.Safety manual is available in 56.5% of laboratories. 73.9% of laboratories are equipped with fire extinguishers. Fume cupboards are provided in 34.7% of laboratories and they are regularly checked in 87.5% of these laboratories. In 78.26% of laboratories suitable measures are taken to minimize formation of aerosols.In 95.6% of laboratories waste is disposed off as per bio-medical waste management handling rules. Laboratory of one private medical college was accredited with NABL and safety parameters were better in that laboratory. Installing safety engineered devices apparently contributes to significant decrease in injuries in laboratories; laboratory safety has to be a part of overall quality assurance programme in hospitals. Accreditation has to be made necessary for all laboratories.

Manual on quality assurance for installation and commissioning of instrumentation, control and electrical equipment in nuclear power plants

International Nuclear Information System (INIS)

1989-01-01

The present Manual on Quality Assurance (QA) for Installation and Commissioning of Instrumentation, Control and Electrical (ICE) Equipment of Nuclear Power Plants contains supporting material and illustrative examples for implementing basic requirements of the quality assurance programme in procurement, receiving, installation and commissioning of this equipment. The Manual on Quality Assurance for Installation and Commissioning of ICE Equipment is designed to supplement and be consistent with the Guidebook as well as with the IAEA Code and Safety Guides on Quality Assurance. It is intended for the use of managerial staff and QA personnel of nuclear power plant owners or the organizations respectively responsible for the legal, technical, administrative and financial aspects of a nuclear power plant. The information provided in the Manual will also be useful to the inspection staff of the regulatory organization in the planning and performance of regulatory inspections at nuclear power plants

Ionising radiation safety training in the Australian defence organisation (ADO)

International Nuclear Information System (INIS)

Jenks, G.J.; O'Donovan, E.J.B.; Wood, W.B.

1996-01-01

Full text: Training personnel in ionising radiation safety within the Australian Defence Organisation (ADO) requires addressing some unique features of an organisation employing both military and civilian personnel. Activities may include those of a civil nature (such as industrial and medical radiography), specific military requirements (for training and emergency response) and scientific research and development. Some personnel may be assigned to full-time duties associated with radiation, while others may be designated as radiation protection officers in remote units with few duties to perform in this role. A further complication is that most military personnel are subjected to postings at regular intervals. The ADO's Directorate of Defence Occupational Health and Safety has established an Ionising Radiation Safety Subcommittee to monitor not only the adequacy of the internal Ionising Radiation Safety Manual but also the training requirements. A training course, responding to these requirements, has been developed to emphasise: basic radiation theory and protection; operation of radiation monitors available in the ADO; an understanding of the Safety Manual; day-to-day radiation safety in units and establishments; and appropriate responses to radiation accidents and emergencies. In addition, students are briefed on a limited number of peripheral topics and participate in some site visits. Currently, two Courses are held annually, each with about twenty students. Most of the material is presented by ADO personnel with external contractor support. The three Courses held to date have proved sufficiently successful, both for the students and the ADO generally, to seek national accreditation through the Australian National Training Authority and, as a first step, competency standards have been identified

GERTS GQ User's Manual.

Science.gov (United States)

Akiba, Y.; And Others

This user's manual for the simulation program Graphical Evaluation and Review Technique (GERT) GQ contains sections on nodes, branches, program input description and format, and program output, as well as examples. Also included is a programmer's manual which contains information on scheduling, subroutine descriptions, COMMON Variables, and…

Application of Safety Instrumented System (SIS) approach in older nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Nasimi, Elnara; Gabbar, Hossam A., E-mail: hossam.gabbar@uoit.ca

2016-05-15

Highlights: • Study Safety Instrumented System (SIS) design for older nuclear power plant. • Apply SIS on Reheater Drains (RD) system. • Apply IEC 61508/61511 to design safety system. • Evaluate risk reduction based on proposed SIS design. - Abstract: In order to remain economically effective and financially profitable, the modern industries have to take their safety culture to a higher level and consider production losses in addition to simple accident prevention techniques. Ideally, compliance with safety requirements start during early design stages, but in some older facilities provisions for Safety Instrumented Systems (SIS) may not have been originally included. In this paper, a case study of a Reheater Drains (RD) system is used to illustrate such an example. Frequent failures of tank level controller lead to transients where the operation of shutting down RD pumps requires operators to manually isolate the quenching water and to close the main steam admission valves. Water in this system is at saturation temperature for the reheater steam side pressure, and any manual operation of the system is highly undesirable due to hazards of working with wet steam at approximately 758 kPa(g) pressure, preheated to 237 °C. Additionally, losses of inventory are highly undesirable as well and challenge other systems in the plant. In this paper, it is suggested that RD system can benefit from installation of an independent SIS system in order to address current challenges. This idea is being explored using IEC 61508 framework for “Functional safety of electrical/electronic/programmable electronic safety-related systems” to provide assurance that the SIS will offer the necessary risk reduction required to achieve required safety for the equipment.

Nuclear electronics laboratory manual

International Nuclear Information System (INIS)

1984-05-01

The Nuclear Electronics Laboratory Manual is a joint product of several electronics experts who have been associated with IAEA activity in this field for many years. The manual does not include experiments of a basic nature, such as characteristics of different active electronics components. It starts by introducing small electronics blocks, employing one or more active components. The most demanding exercises instruct a student in the design and construction of complete circuits, as used in commercial nuclear instruments. It is expected that a student who completes all the experiments in the manual should be in a position to design nuclear electronics units and also to understand the functions of advanced commercial instruments which need to be repaired or maintained. The future tasks of nuclear electronics engineers will be increasingly oriented towards designing and building the interfaces between a nuclear experiment and a computer. The manual pays tribute to this development by introducing a number of experiments which illustrate the principles and the technology of interfacing

Application of a Pod Exercise to University Education Programs

Directory of Open Access Journals (Sweden)

Kristen Dietz

2016-12-01

Full Text Available This paper offers a novel method and subsequent partnership to engage and teach university students. Prior to 11 September 2001 or 9/11, much of the public safety readiness responsibility was limited to a few government officials. Today, public safety is much more widely managed. For this effort, we developed a strategic partnership between state and local government and Purdue University that provides an improved environment for learning and for public health and safety. By using an exercise deployment Strategic National Stockpile (SNS in a Point of Distribution (POD exercise, our efforts with partnering between state and local government and the university provide benefits and opportunities to each. Simultaneously, we tested a full scale POD mass prophylaxis response to an anthrax attack through teaching and training university students who also gain valuable internship-like experience. The ongoing relationship between government and the university's student talent can benefit all in developing paths for future research and data analysis expected of academia and of improving public safety and responsiveness of government.

Car safety seat usage and selection among families attending University Hospital Limerick

LENUS (Irish Health Repository)

Scully, P

2016-05-01

The safest way for children to travel within a car is by provision of a weight-appropriate safety-seat. To investigate this, we conducted a cross-sectional study of adult parents who had children under 12 years, and collected information related to: car use, safety-seat legislation, and type of safety-seat employed. Data were reviewed on 120 children from 60 respondents. Ninety-eight (81.7%) children were transported daily by car. Forty-eight (81.4%) respondents were aware that current safety-seat legislation is based on the weight of the child. One hundred and seven (89.9%) children were restrained during travel using a car safety-seat. One hundred and two (96.2%) safety seats were newly purchased, installed in 82.3% (88) cases by family members with installation instructions fully read in 58 (55.2%) cases. Ninety-nine (83.2%) children were restrained using an appropriate safety-seat for their weight. The results show that four out of five families are employing the most appropriate safety-seat for their child, so providing an effective mechanism to reduce car-related injury. However, the majority of safety-seats are installed by family members, which may have child safety consequences.

14 CFR 121.141 - Airplane flight manual.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Airplane flight manual. 121.141 Section 121... REQUIREMENTS: DOMESTIC, FLAG, AND SUPPLEMENTAL OPERATIONS Manual Requirements § 121.141 Airplane flight manual. (a) Each certificate holder shall keep a current approved airplane flight manual for each type of...

The CAIN computer code for the generation of MABEL input data sets: a user's manual

International Nuclear Information System (INIS)

Tilley, D.R.

1983-03-01

CAIN is an interactive FORTRAN computer code designed to overcome the substantial effort involved in manually creating the thermal-hydraulics input data required by MABEL-2. CAIN achieves this by processing output from either of the whole-core codes, RELAP or TRAC, interpolating where necessary, and by scanning RELAP/TRAC output in order to generate additional information. This user's manual describes the actions required in order to create RELAP/TRAC data sets from magnetic tape, to create the other input data sets required by CAIN, and to operate the interactive command procedure for the execution of CAIN. In addition, the CAIN code is described in detail. This programme of work is part of the Nuclear Installations Inspectorate (NII)'s contribution to the United Kingdom Atomic Energy Authority's independent safety assessment of pressurized water reactors. (author)

Safety review and approval process for the TFTR

International Nuclear Information System (INIS)

Levine, J.D.; Howe, H.J.; Howe, K.E.

1983-01-01

The design, construction, and operation of the Tokamak Fusion Test Reactor (TFTR) has undergone an extensive safety and enviromental analysis involving Princeton Plasma Physics Laboratory (PPPL), the U.S. Department of Energy (DOE), the Ebasco/Grumman Industrial Subcontractor Team, and other organizations. This analysis, which is continuing during the TFTR operational phase, has been facilitated by the preparation, review and approval of several documents, including an Environmental Statement (Draft and Final), a Preliminary Safety Analysis Report (PSAR), a Final Safety Analysis Report (FSAR), Operations Safety Requirements (OSRs) and Safety Requirements (SRs), and various Operating and Maintenance Manuals. Through TFTR Safety Group participation in formal system design evaluations, change control boards, and reviews of project procurement and installation documentation, the TFTR Management Configuration Control System assures that all aspects of the project, including proposed design, installation and operational changes, receive prompt and thorough safety analyses. These efforts will continue as the TFTR Program moves into the neutral beam and D-T operational phases. The safety review and approval experience that has been acquired on the TFTR Project should serve as a foundation for similar efforts on future fusion devices

Experimental study on the safety of Kyoto University Research Reactor at natural circulation cooling mode

International Nuclear Information System (INIS)

Zhang, Jian; Shen, Xiuzhong; Fujihara, Yasuyuki; Sano, Tadafumi; Yamamoto, Toshihiro; Nakajima, Ken

2015-01-01

Highlights: • The natural circulation cooling capacity of Kyoto University Research Reactor (KUR) was experimentally investigated. • The distributions of the outlet temperature of the fuel elements under natural circulation operations were measured. • The average temperature rise and the average natural circulation flow velocity in core were calculated. • The safety of KUR under all of the normal operations with natural circulation cooling mode has been analyzed. • The natural circulation flow after the reactor shutdown was confirmed. - Abstract: In this study, the natural circulation cooling capacity of Kyoto University Research Reactor (KUR) is experimentally investigated by measuring the inlet and outlet temperatures of the core under natural circulation operation at various thermal powers ranging from 10 kW to 100 kW and the shutdown state. In view of the uneven power distribution and the resultant inconsistent coolant outlet temperature in the core, eight measuring points located separately in the outlet of the fuel elements were chosen to investigate the distribution of the outlet temperature of the core. The natural circulation cooling capacity represented by the average natural circulation flow velocity in the core is calculated from the temperature difference between the outlet and inlet temperature of the core. The measured outlet temperature of the fuel elements shows a cross-sectional distribution agreeing with the distribution of the thermal output of the fuel elements in the core. Since the measured outlet temperatures decrease quickly in the flow direction in a small local region above the outlet of the core, the mixing of the hot water out of the core with the cold water around the core outlet is found to happen in the small region not more than 5 cm far from the core outlet. The natural circulation flow velocity in the core increases non-linearly with the thermal power. The safety of KUR has been analysed by conservatively estimating the

Quality manual for the Danish greenhouse gas inventory

DEFF Research Database (Denmark)

Nielsen, Ole-Kenneth; Plejdrup, Marlene Schmidt; Winther, Morten

The report outlines the quality work undertaken by the emission inventory group at the Department of Environmental Science, Aarhus University in connection with the preparation and reporting of the Danish greenhouse gas inventory. The report updates and expands on the first version of the quality...... manual published in 2005. The report fulfils the mandatory requirements for a quality assurance/quality control (QA/QC) plan as lined out in the UNFCCC reporting guidelines and the specifications related to reporting under the Kyoto Protocol. The report describes all elements of the internal QC...... procedures as well as the QA and verification activities carried out in connection with the Danish greenhouse gas inventory....

Knowledge and practices about hospital waste disposal and universal safety precautions in class IV employee.

Science.gov (United States)

Megha, Khobragade; Daksha, Pandit

2013-01-01

Norms and guidelines are formed for safe disposal of hospital waste but question is whether these guidelines are being followed and if so, to what extent. Hence, this study was conducted with objective to study the knowledge and practices about hospital waste disposal and universal safety precautions in class IV employee and to study its relationship with education, occupation and training. A cross-sectional study was carried out in a teaching hospital in Mumbai using semi-structured questionnaire in which Class IV employee were included. Questionnaire was filled by face to face interview. Data were analyzed using SPSS. 48.7% Class IV employee were not trained. More than 40% were following correct practices about disinfection of infectious waste. None of the respondents were using protective footwear while handling hospital waste. Only 25.5% were vaccinated for hepatitis B. 16% had done HIV testing due to contact with blood, body fluid, needle stick injury. Knowledge and practices about hospital waste disposal and universal precaution were statistically significant in trained respondents. Training of employees should be given top priority; those already in service should be given on the job training at the earliest.

EPICS: Allen-Bradley hardware reference manual

International Nuclear Information System (INIS)

Nawrocki, G.

1993-01-01

This manual covers the following hardware: Allen-Bradley 6008 -- SV VMEbus I/O scanner; Allen-Bradley universal I/O chassis 1771-A1B, -A2B, -A3B, and -A4B; Allen-Bradley power supply module 1771-P4S; Allen-Bradley 1771-ASB remote I/O adapter module; Allen-Bradley 1771-IFE analog input module; Allen-Bradley 1771-OFE analog output module; Allen-Bradley 1771-IG(D) TTL input module; Allen-Bradley 1771-OG(d) TTL output; Allen-Bradley 1771-IQ DC selectable input module; Allen-Bradley 1771-OW contact output module; Allen-Bradley 1771-IBD DC (10--30V) input module; Allen-Bradley 1771-OBD DC (10--60V) output module; Allen-Bradley 1771-IXE thermocouple/millivolt input module; and the Allen-Bradley 2705 RediPANEL push button module

Patient safety incident reports related to traditional Japanese Kampo medicines: medication errors and adverse drug events in a university hospital for a ten-year period.

Science.gov (United States)

Shimada, Yutaka; Fujimoto, Makoto; Nogami, Tatsuya; Watari, Hidetoshi; Kitahara, Hideyuki; Misawa, Hiroki; Kimbara, Yoshiyuki

2017-12-21

Kampo medicine is traditional Japanese medicine, which originated in ancient traditional Chinese medicine, but was introduced and developed uniquely in Japan. Today, Kampo medicines are integrated into the Japanese national health care system. Incident reporting systems are currently being widely used to collect information about patient safety incidents that occur in hospitals. However, no investigations have been conducted regarding patient safety incident reports related to Kampo medicines. The aim of this study was to survey and analyse incident reports related to Kampo medicines in a Japanese university hospital to improve future patient safety. We selected incident reports related to Kampo medicines filed in Toyama University Hospital from May 2007 to April 2017, and investigated them in terms of medication errors and adverse drug events. Out of 21,324 total incident reports filed in the 10-year survey period, we discovered 108 Kampo medicine-related incident reports. However, five cases were redundantly reported; thus, the number of actual incidents was 103. Of those, 99 incidents were classified as medication errors (77 administration errors, 15 dispensing errors, and 7 prescribing errors), and four were adverse drug events, namely Kampo medicine-induced interstitial pneumonia. The Kampo medicine (crude drug) that was thought to induce interstitial pneumonia in all four cases was Scutellariae Radix, which is consistent with past reports. According to the incident severity classification system recommended by the National University Hospital Council of Japan, of the 99 medication errors, 10 incidents were classified as level 0 (an error occurred, but the patient was not affected) and 89 incidents were level 1 (an error occurred that affected the patient, but did not cause harm). Of the four adverse drug events, two incidents were classified as level 2 (patient was transiently harmed, but required no treatment), and two incidents were level 3b (patient was

46 CFR 160.176-21 - User manuals.

Science.gov (United States)

2010-10-01

... 46 Shipping 6 2010-10-01 2010-10-01 false User manuals. 160.176-21 Section 160.176-21 Shipping...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Inflatable Lifejackets § 160.176-21 User manuals. (a) The manufacturer must develop a user's manual for each model of inflatable lifejacket. The content of the manual...

Safety assessment of high consequence robotics system

International Nuclear Information System (INIS)

Robinson, D.G.; Atcitty, C.B.

1996-01-01

This paper outlines the use of a failure modes and effects analysis for the safety assessment of a robotic system being developed at Sandia National Laboratories. The robotic system, the weigh and leak check system, is to replace a manual process for weight and leakage of nuclear materials at the DOE Pantex facility. Failure modes and effects analyses were completed for the robotics process to ensure that safety goals for the systems have been met. Due to the flexible nature of the robot configuration, traditional failure modes and effects analysis (FMEA) were not applicable. In addition, the primary focus of safety assessments of robotics systems has been the protection of personnel in the immediate area. In this application, the safety analysis must account for the sensitivities of the payload as well as traditional issues. A unique variation on the classical FMEA was developed that permits an organized and quite effective tool to be used to assure that safety was adequately considered during the development of the robotic system. The fundamental aspects of the approach are outlined in the paper

Development of a measure of safety climate

Directory of Open Access Journals (Sweden)

N. R. Barnes

1990-06-01

Full Text Available A measure of safety climate was developed to aid management in identifying safety problems and responding proactively to safety issues; to assess the general mood of the workforce to safety; and as a standard for comparison with other organizations. The measure of safety climate was based on items extracted from the Chamber of Mines "Loss Control" audit manual. Reliability analysis performed on the scale indicated consistently high reliability coefficients across three ethnic groups. Factor analysis gave support for the construct validity of the scale. Opsomming 'n Meting vir veiligheidsklimaat is ontwikkel ten einde bestuur in staat te stel om veiligheidsprobleme te identifiseer en om pro-aktiefop te tree; om die algemene gevoel van die werkskragte rakende veiligheid te bepaal en om 'n maatstaf vir vergelyking met ander organisasies daar te stel. 'n Betroubaarheidssanalise wat op die skaal uitgevoer is het daarop gedui dat daar konsekwent hoe betroubaarheidskoefisiënte vir drie etniese groepe verkry word. 'n Faktoranalise het die konstrukgeldigheid van die skaal bevestig. The author acknowledges the financial assistance provided by the Human Sciences Research Council for this research.

US Department of Energy radiological control manual

International Nuclear Information System (INIS)

1994-04-01

This manual establishes practices for the conduct of Department of Energy radiological control activities. The Manual states DOE's positions and views on the best courses of action currently available in the area of radiological controls. Accordingly, the provisions in the Manual should be viewed by contractors as an acceptable technique, method or solution for fulfilling their duties and responsibilities. This Manual shall be used by DOE in evaluating the performance of its contractors. This Manual is not a substitute for Regulations; it is intended to be consistent with all relevant statutory and regulatory requirements and shall be revised whenever necessary to ensure such consistency. Some of the Manual provisions, however, challenge the user to go well beyond minimum requirements. Following the course of action delineated in the Manual will result in achieving and surpassing related statutory or regulatory requirements

Difference between manual and digital measurements of dental arches of orthodontic patients.

Science.gov (United States)

Jiménez-Gayosso, Sandra Isabel; Lara-Carrillo, Edith; López-González, Saraí; Medina-Solís, Carlo Eduardo; Scougall-Vilchis, Rogelio José; Hernández-Martínez, César Tadeo; Colomé-Ruiz, Gabriel Eduardo; Escoffié-Ramirez, Mauricio

2018-06-01

The objective of this study was to compare the differences between the measurements performed manually to those obtained using a digital model scanner of patients with orthodontic treatment.A cross-sectional study was performed in a sample of 30 study models from patients with permanent dentition who attended a university clinic between January 2010 and December 2015. For the digital measurement, a Maestro 3D Ortho Studio scanner (Italy) was used and Mitutoyo electronic Vernier calipers (Kawasaki, Japan) were used for manual measurement. The outcome variables were the measurements for maxillary intercanine width, mandibular intercanine width, maxillary intermolar width, mandibular intermolar width, overjet, overbite, maxillary arch perimeter, mandibular arch perimeter, and palate height. The independent variables, besides age and sex, were a series of arc characteristics. The Student t test, paired Student t test, and Pearson correlation in SPSS version 19 were used for the analysis.Of the models, 60% were from women. Two of nine measurements for pre-treatment and 6 of 9 measurements for post-treatment showed a difference. The variables that were different between the manual and digital measurements in the pre-treatment were maxillary intermolar width and palate height (P manually and digitally showed certain similarities for both vertical and transverse measurements. There are many advantages offered to the orthodontist, such as easy storage; savings in time and space; facilitating the reproducibility of information; and conferring the security of not deteriorating over time. Its main disadvantage is the cost.

Technical Manual: 2002 Series GED Tests

Science.gov (United States)

Ezzelle, Carol; Setzer, J. Carl

2009-01-01

This manual was written to provide technical information regarding the 2002 Series GED (General Educational Development) Tests. Throughout this manual, documentation is provided regarding the development of the GED Tests, data collection activities, as well as reliability and validity evidence. The purpose of this manual is to provide evidence…

Technical Manual. The ACT®

Science.gov (United States)

ACT, Inc., 2014

2014-01-01

This manual contains technical information about the ACT® college readiness assessment. The principal purpose of this manual is to document the technical characteristics of the ACT in light of its intended purposes. ACT regularly conducts research as part of the ongoing formative evaluation of its programs. The research is intended to ensure that…

Using an online quiz-based reinforcement system to teach healthcare quality and patient safety and care transitions at the University of California.

Science.gov (United States)

Shaikh, Ulfat; Afsar-Manesh, Nasim; Amin, Alpesh N; Clay, Brian; Ranji, Sumant R

2017-10-01

Implementing quality improvement (QI) education during clinical training is challenging due to time constraints and inadequate faculty development in these areas. Quiz-based reinforcement systems show promise in fostering active engagement, collaboration, healthy competition and real-time formative feedback, although further research on their effectiveness is required. An online quiz-based reinforcement system to increase resident and faculty knowledge in QI, patient safety and care transitions. Experts in QI and educational assessment at the 5 University of California medical campuses developed a course comprised of 3 quizzes on Introduction to QI, Patient Safety and Care Transitions. Each quiz contained 20 questions and utilized an online educational quiz-based reinforcement system that leveraged spaced learning. Approximately 500 learners completed the course (completion rate 66-86%). Knowledge acquisition scores for all quizzes increased after completion: Introduction to QI (35-73%), Patient Safety (58-95%), and Care Transitions (66-90%). Learners reported that the quiz-based system was an effective teaching modality and preferred this type of education to classroom-based lectures. Suggestions for improvement included reducing frequency of presentation of questions and utilizing more questions that test learners on application of knowledge instead of knowledge acquisition. A multi-campus online quiz-based reinforcement system to train residents in QI, patient safety and care transitions was feasible, acceptable, and increased knowledge. The course may be best utilized to supplement classroom-based and experiential curricula, along with increased attention to optimizing frequency of presentation of questions and enhancing application skills. © The Author 2017. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

Marketing Research. Instructor's Manual.

Science.gov (United States)

Small Business Administration, Washington, DC.

Prepared for the Administrative Management Course Program, this instructor's manual was developed to serve small-business management needs. The sections of the manual are as follows: (1) Lesson Plan--an outline of material covered, which may be used as a teaching guide, presented in two columns: the presentation, and a step-by-step indication of…

Indoor Air Quality Manual.

Science.gov (United States)

Baldwin Union Free School District, NY.

This manual identifies ways to improve a school's indoor air quality (IAQ) and discusses practical actions that can be carried out by school staff in managing air quality. The manual includes discussions of the many sources contributing to school indoor air pollution and the preventive planning for each including renovation and repair work,…

25 CFR 175.5 - Operations manual.

Science.gov (United States)

2010-04-01

... Provisions § 175.5 Operations manual. (a) The Area Director shall establish an operations manual for the... Director shall amend the operations manual as needed. (b) The public shall be notified by the Area Director... shall be published in local newspaper(s) of general circulation, posted at the utility office(s), and...

AFM-CMM integrated instrument user manual

DEFF Research Database (Denmark)

Marinello, Francesco; Bariani, Paolo

This manual gives general important guidelines for a proper use of the integrated AFM-CMM instrument. More information can be collected reading: • N. Kofod Ph.D thesis [1]; • P. Bariani Ph.D thesis [2]; • Dualscope DME 95-200 operation manuals [3]; • SPIP help [4] • Stitching software user manual...

Manual for subject analysis

International Nuclear Information System (INIS)

2002-01-01

This document is one in a series of publications known as the ETDE/INIS Joint Reference Series and also constitutes a part of the ETDE Procedures Manual. It presents the rules, guidelines and procedures to be adopted by centers submitting input to the International Nuclear Information System (INIS) or the Energy Technology Data Exchange (ETDE). It is a manual for the subject analysis part of input preparation, meaning the selection, subject classification, abstracting and subject indexing of relevant publications, and is to be used in conjunction with the Thesauruses, Subject Categories documents and the documents providing guidelines for the preparation of abstracts. The concept and structure of the new manual are intended to describe in a logical and efficient sequence all the steps comprising the subject analysis of documents to be reported to INIS or ETDE. The manual includes new chapters on preparatory analysis, subject classification, abstracting and subject indexing, as well as rules, guidelines, procedures, examples and a special chapter on guidelines and examples for subject analysis in particular subject fields. (g.t.; a.n.)

Manual on therapeutic uses of iodine-131. Incorporating: Applications guide, procedures guide, basics guide

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

This publication is part of practical radiation safety manual series for different fields of application aimed primarily at persons handling radiation sources on a daily routine basis, which could at same time be used by the competent authorities, supporting their efforts in the radiation protection training of workers or medical assistance personnel or helping on-site management to set up local radiation protection rules. It is dedicated to therapeutic uses of Iodine-131: its application and procedures guides.

Manual on therapeutic uses of iodine-131. Incorporating: Applications guide, procedures guide, basics guide

International Nuclear Information System (INIS)

1996-01-01

This publication is part of practical radiation safety manual series for different fields of application aimed primarily at persons handling radiation sources on a daily routine basis, which could at same time be used by the competent authorities, supporting their efforts in the radiation protection training of workers or medical assistance personnel or helping on-site management to set up local radiation protection rules. It is dedicated to therapeutic uses of Iodine-131: its application and procedures guides

Advances in industrial ergonomics and safety II

Energy Technology Data Exchange (ETDEWEB)

Das, B [ed.; Technical University of Nova Scotia, Halifax, NS (Canada). Dept. of Industrial Engineering

1990-01-01

135 papers were presented at the conference in 20 sessions with the following headings: aging and industrial performance; back injury and rehabilitation; bioinstrumentation and electromyography; cumulative trauma disorders; engineering anthropometry; equipment design and ergonomics; human computer interaction; human performance and worker satisfaction; human strength and testing; industrial accidents and prevention; industrial biomechanics; injuries in health care; manual materials handling; noise and vibration effects; occupational health and safety; robotics and agricultural machinery safety; statistics and modelling in ergonomics; work environment; workplace safety analysis; and workstation design. Papers are included entitled: A model for analyzing mining machine illumination systems' by R.L. Unger, A.F. Glowacki and E.W. Rossi, 'Ergonomic design guidelines for underground coal mining equipment by E.J. Conway and R. Unger, and Hot work environment and human strain - a relation proposed by K. Bhattacharya and S. Raja.

Advances in industrial ergonomics and safety II

Energy Technology Data Exchange (ETDEWEB)

Das, B. (ed.) (Technical University of Nova Scotia, Halifax, NS (Canada). Dept. of Industrial Engineering)

1990-01-01

135 papers were presented at the conference in 20 sessions with the following headings: aging and industrial performance; back injury and rehabilitation; bioinstrumentation and electromyography; cumulative trauma disorders; engineering anthropometry; equipment design and ergonomics; human computer interaction; human performance and worker satisfaction; human strength and testing; industrial accidents and prevention; industrial biomechanics; injuries in health care; manual materials handling; noise and vibration effects; occupational health and safety; robotics and agricultural machinery safety; statistics and modelling in ergonomics; work environment; workplace safety analysis; and workstation design. Papers are included entitled: A model for analyzing mining machine illumination systems' by R.L. Unger, A.F. Glowacki and E.W. Rossi, 'Ergonomic design guidelines for underground coal mining equipment by E.J. Conway and R. Unger, and Hot work environment and human strain - a relation proposed by K. Bhattacharya and S. Raja.

Reconceptualising manual therapy skills in contemporary practice.

Science.gov (United States)

Rabey, Martin; Hall, Toby; Hebron, Clair; Palsson, Thorvaldur Skuli; Christensen, Steffan Wittrup; Moloney, Niamh

2017-06-01

With conflicting evidence regarding the effectiveness of manual therapy calls have arisen within some quarters of the physiotherapy profession challenging the continued use of manual skills for assessment and treatment. A reconceptualisation of the importance of manual examination findings is put forward, based upon a contemporary understanding of pain science, rather than considering these skills only in terms of how they should "guide" manual therapy interventions. The place for manual examination findings within complex, multidimensional presentations is considered using vignettes describing the presentations of five people with low back pain. As part of multidimensional, individualised management, the balance of evidence relating to the effectiveness, mechanisms of action and rationale for manual skills is discussed. It is concluded that if manual examination and therapeutic skills are used in a manner consistent with a contemporary understanding of pain science, multidimensional patient profiles and a person-centred approach, their selective and judicious use still has an important role. Copyright © 2017 Elsevier Ltd. All rights reserved.

Pressure Safety: Advanced Self-Study 30120

Energy Technology Data Exchange (ETDEWEB)

Glass, George [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-02-29

Pressure Safety Advance Self-Study (Course 30120) consists of an introduction, five modules, and a quiz. To receive credit in UTrain for completing this course, you must score 80% or better on the 15-question quiz (check UTrain). Directions for initiating the quiz are appended to the end of this training manual. This course contains several links to LANL websites. UTrain might not support active links, so please copy links into the address line in your browser.

Intermodal safety research needs report of the sixth workshop on national transportation problems

Energy Technology Data Exchange (ETDEWEB)

Warshawer, A.J. (ed.)

1976-04-01

This conference brought together DOT policymakers, university principal investigators and other professionals to consider the intermodal safety research requirements of the Department of Transportation. The objectives of the conference were: (1) to highlight safety problems and needed transportation safety research identified by DOT modal safety managers and to stimulate university or university/industry teams to respond with research proposals which emphasize multi-modal applicability and a system view; and (2) to provide a forum for university research groups to inform DOT safety managers of promising new directions in transportation safety research and new tools with which to address safety related problems. The conference addressed the research requirements for safety as identified by the Statement of National Transportation Policy and by the modal safety managers in three principal contexts, each a workshop panel: I, Inter-Institutional Problems of Transportation Safety. Problems were described as: Federal-State, local; Federal-Industry; Federal-Public, Consumer groups. II, Goal Setting and Planning for Transportation Safety Programs. Issues were: modifying risk behavior, safety as a social value, and involving citizens in development of standards as a way of increasing probability of achieving program objectives. III, DOT Information, Management, and Evaluation Systems Requirements. Needs were: data requirements and analytic tools for management of safety programs.

Major Lung Resections Using Manual Suturing Versus Staplers During Fiscal Crisis.

Science.gov (United States)

Potaris, Konstantinos; Kapetanakis, Emmanuil; Papamichail, Konstantinos; Midvighi, Elena; Verveniotis, Alexis; Parissis, Fotios; Apostolou, Demetrios; Tziortziotis, Vaios; Maimani, Spiridoula; Pouliara, Evangelia; Vogiatzis, Gregorios; Kakaris, Stamatis; Konstantinou, Marios

2015-07-27

AbstractObjective: During fiscal crisis there was a period of shortage of staplers in our hospital, which drove us to manual suturing of bronchi and pulmonary vessels during major lung resections. We present our experience during that period in comparison to a subsequent period when staplers became available again. A total of 256 lobectomies and 78 pneumonectomies were performed using manual suturing (group A), between September 2009 and September 2010, and compared regarding surgical outcome to 248 lobectomies and 60 pneumonectomies using staplers (group B), between September 2011 and September 2012. Although we did not observe statistically significant differences but only a trend towards less operative time, for both lobectomies (p=0.21) and pneumonectomies (p=0.31), we actually noted a 41 and 47 minutes saving of operative time using staplers (group B), in comparison to manual suturing (group A). We also observed a trend towards less morbidity rates in patients of group B, who underwent lobectomy (10.48%), and pneumonectomy (20%), versus patients of group A, who underwent lobectomy (15.62%), and pneumonectomy (30.76%); we did not observe any substantial differences in the other surgical outcome variables, and in patients' demographics comorbidities, and anatomic allocation of surgical procedures performed. The use of staplers offers safety with secure bronchial or vascular sealing, and saving of operative time. Their unavailability at an interval during fiscal crisis although it did not affect surgical outcome, revealed their usefulness and value.

Sedation and physiologic response to manual restraint after intranasal administration of midazolam in Hispaniolan Amazon parrots (Amazona ventralis).

Science.gov (United States)

Mans, Christoph; Guzman, David Sanchez-Migallon; Lahner, Lesanna L; Paul-Murphy, Joanne; Sladky, Kurt K

2012-09-01

Administration of intranasal midazolam (2 mg/kg) was evaluated for sedation and effects on cloacal temperature, respiratory rate, and heart rate in manually restrained Hispaniolan Amazon parrots (Amazona ventralis). Adult parrots (n=9) were administered either midazolam (2 mg/kg) or an equal volume of saline solution intranasally before a 15-minute manual restraint in a complete crossover study. Respiratory rate and sedation scores were recorded before and during capture and during and after 15 minutes of manual restraint. Heart rate and cloacal temperature were recorded during manual restraint. After restraint, the parrots received intranasal flumazenil (0.05 mg/kg) or an equal volume of saline solution, and the recovery time was recorded. In those birds that received midazolam, sedation was observed within 3 minutes of administration, and vocalization, flight, and defense responses were significantly reduced during capture. During manual restraint, the mean rate of cloacal temperature increase was significantly slower and remained significantly lower in birds that received midazolam compared with controls. Mean respiratory rates were significantly lower for up to 12 minutes in parrots that received midazolam compared with those receiving saline solution. Flumazenil antagonized the effects of midazolam within 10 minutes. No overt clinical adverse effects to intranasal midazolam and flumazenil administration were observed. Further studies on the safety of intranasal midazolam and flumazenil in this species are warranted.

Design and installation manual for thermal energy storage

Energy Technology Data Exchange (ETDEWEB)

Cole, R L; Nield, K J; Rohde, R R; Wolosewicz, R M

1980-01-01

The purpose of this manual is to provide information on the design and installation of thermal energy storage in active solar systems. It is intended for contractors, installers, solar system designers, engineers, architects, and manufacturers who intend to enter the solar energy business. The reader should have general knowledge of how solar heating and cooling systems operate and knowledge of construction methods and building codes. Knowledge of solar analysis methods such as f-Chart, SOLCOST, DOE-1, or TRNSYS would be helpful. The information contained in the manual includes sizing storage, choosing a location for the storage device, and insulation requirements. Both air-based and liquid-based systems are covered with topics on designing rock beds, tank types, pump and fan selection, installation, costs, and operation and maintenance. Topics relevant to latent heat storage include properties of phase-change materials, sizing the storage unit, insulating the storage unit, available systems, and cost. Topics relevant to heating domestic water include safety, single- and dual-tank systems, domestic water heating with air- and liquid-based space heating systems, and stand alone domestics hot water systems. Several appendices present common problems with storage systems and their solutions, heat transfer fluid properties, economic insulation thickness, heat exchanger sizing, and sample specifications for heat exchangers, wooden rock bins, steel tanks, concrete tanks, and fiberglass-reinforced plastic tanks.

Manual licensing procedure co-fermentation of manure. Guideline for the initiator; Handboek vergunningverlening co-vergisting van mest. Wegwijzer voor de initiatiefnemer

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-11-15

This manual helps licensers assess the opportunities and possible bottlenecks in applying for a license for a co-digester. The manual contains elaborate information on the safety of the co-digester, the influence on the environment, the smell, the noise and the transport movements. Moreover, the licensing procedure is explained [Dutch] Dit handboek helpt vergunningverleners bij het inschatten van de kansen en mogelijke knelpunten bij de aanvraag voor een co-vergister. Het handboek bevat uitgebreide informatie over de veiligheid van de co-vergister, de invloed op de omgeving, de geur, het geluid en transportbewegingen. Daarnaast komt de procedure rond de vergunningverlening aan bod.

Pesticide Applicator Training Manual, Category 2 - Forest Pest Control. A Training Program for the Certification of Commercial Pesticide Applicators.

Science.gov (United States)

Sinclair, W. A., Comp.

This manual provides information needed to meet specific standards for certification as a pesticide applicator. Each of the eight chapters deals with a different aspect of pesticide use. Chapter one discusses the problems of use as it relates to safety of humans and the environment. Chapter two is concerned with the identification and diagnosis of…

TRUBA User Manual

International Nuclear Information System (INIS)

Tereshchenko, M. A.; Castejon, F.; Cappa, A.

2008-01-01

The TRUBA (pipeline in Russian) code is a computational tool for studying the propagation of Gaussian-shaped microwave beams in a prescribed equilibrium plasma. This manual covers the basic material handed to use the implementation of TRUBA (version 3,4) interfaced with the numerical library of the TJ-II stellarator. The manual provides a concise theoretical background of the problem, specifications for setting up the input files and interpreting the output of the code, and some information useful in modifying TRUBA. (Author) 13 refs

TRUBA User Manual

Energy Technology Data Exchange (ETDEWEB)

Tereshchenko, M. A.; Castejon, F.; Cappa, A.

2008-04-25

The TRUBA (pipeline in Russian) code is a computational tool for studying the propagation of Gaussian-shaped microwave beams in a prescribed equilibrium plasma. This manual covers the basic material handed to use the implementation of TRUBA (version 3,4) interfaced with the numerical library of the TJ-II stellarator. The manual provides a concise theoretical background of the problem, specifications for setting up the input files and interpreting the output of the code, and some information useful in modifying TRUBA. (Author) 13 refs.

Motivation of employers to encourage their employees to use safety belts (phase 2).

Science.gov (United States)

1983-08-01

An employer manual is developed which offers guidelines for the elements of a successful safety bell program. The guidelines are based upon the model developed as a result of site visits to successful programs and synthesis of expert opinion. A needs...

Follow 1.1 - a program for visualization of Thermal-Hydraulic computer simulations. User's manual

International Nuclear Information System (INIS)

Hyvarinen, J.

1990-04-01

FOLLOW is a computer program designed to function as an analyst's aid when performing large thermalhydraulic and related safety calculations using the well known simulation codes RELAP5, MELCOR, SMABRE and TRAB. The code is a by-product of the effort to improve the analysis capabilities of the Finnish Centre for Radiation and Nuclear Safety (STUK). FOLLOW's most important application is as an on-line 'window' into the progress of the simulation calculation. The thermal-hydraulic analyses related to nuclear safety routinely require very long calculation times. FOLLOW provides a possibility to follow the course of the simulation and thus make observations of the results already during the simulation. FOLLOW's various outputs have been designed to mimic those available at nuclear power plant operators' console. Thus FOLLOW can also be used much like a nuclear power plant simulator. This manual describes the usages, features and input requirements of FOLLOW version 1.1, including a sample problem input and various outputs. (orig.)

Developing a Pupil Transportation Manual.

Science.gov (United States)

Douglas, Dave

1987-01-01

District-level pupil transportation manuals that contain clear, concise information about objectives, policies, and regulations are a must. These manuals should also specify procedures concerning evaluation processes, personnel recruitment and selection, and the driver training program. (MLH)

The Emerging Workforce of International University Student Workers: Injury Experience in an Australian University

Directory of Open Access Journals (Sweden)

Yahya Thamrin

2018-03-01

Full Text Available International university students are a growing section of the workforce and are thought to be at greater risk of injury. Qualitative studies have highlighted vulnerabilities, but there is a shortage of quantitative research exploring the injury experience and associated risk factors of this emerging issue. In this study, a total of 466 university student workers across a range of study programs in a single Australian university completed an online survey, with questions relating to their background, working experience, training and injury experience. Risk factors for injury were explored in a multivariate statistical model. More than half had not received any safety training before they started work, and 10% reported having had a work injury. About half of these injuries occurred after training. Statistically significant risk factors for injury included working more than 20 h per week (adjusted odds ratio 2.20 (95% CI 1.03–4.71 and lack of confidence in discussing safety issues (AOR 2.17; 95% CI 1.13–4.16. The findings suggest the need for a more engaging and effective approach to safety education and a limit on working hours. This situation is a moral challenge for universities, in that they are effectively sponsoring young workers in the community. It is recommended that longitudinal studies of international student workers be conducted.

Safety assessment of a robotic system handling nuclear material

International Nuclear Information System (INIS)

Atcitty, C.B.; Robinson, D.G.

1996-01-01

This paper outlines the use of a Failure Modes and Effects Analysis for the safety assessment of a robotic system being developed at Sandia National Laboratories. The robotic system, The Weigh and Leak Check System, is to replace a manual process at the Department of Energy facility at Pantex by which nuclear material is inspected for weight and leakage. Failure Modes and Effects Analyses were completed for the robotics process to ensure that safety goals for the system had been meet. These analyses showed that the risks to people and the internal and external environment were acceptable

Final Safety Analysis Report (FSAR) for Building 332, Increment III

Energy Technology Data Exchange (ETDEWEB)

Odell, B. N.; Toy, Jr., A. J.

1977-08-31

This Final Safety Analysis Report (FSAR) supplements the Preliminary Safety Analysis Report (PSAR), dated January 18, 1974, for Building 332, Increment III of the Plutonium Materials Engineering Facility located at the Lawrence Livermore Laboratory (LLL). The FSAR, in conjunction with the PSAR, shows that the completed increment provides facilities for safely conducting the operations as described. These documents satisfy the requirements of ERDA Manual Appendix 6101, Annex C, dated April 8, 1971. The format and content of this FSAR complies with the basic requirements of the letter of request from ERDA San to LLL, dated March 10, 1972. Included as appendices in support of th FSAR are the Building 332 Operational Safety Procedure and the LLL Disaster Control Plan.

Safety-evaluation report related to the renewal of the operating license for the research reactor at the Iowa State University (Docket No. 50-116)

International Nuclear Information System (INIS)

1983-09-01

This Safety Evaluation Report for the application filed by the Iowa State University (ISU) for a renewal of the Class 104 Operating License R-59 to continue to operate its Argonaut-type research reactor has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is owned and operated by the Iowa State University, and is located on the ISU campus in Ames, Story County, Iowa. The staff concludes that the reactor facility can continue to be operated by ISU without endangering the health and safety of the public. The principal matters reviewed are: design, testing, and performance of the reactor components and systems; the expected consequences of credible accidents; the licensee's management organization; the method used for the control of radiological effluents; the licensee's technical specifications; financial data and information; the physical protection program; procedures for training reactor operators; and emergency plans. 11 references, 15 figures, 13 tables

Improving operating room safety

Directory of Open Access Journals (Sweden)

Garrett Jill

2009-11-01

Full Text Available Abstract Despite the introduction of the Universal Protocol, patient safety in surgery remains a daily challenge in the operating room. This present study describes one community health system's efforts to improve operating room safety through human factors training and ultimately the development of a surgical checklist. Using a combination of formal training, local studies documenting operating room safety issues and peer to peer mentoring we were able to substantially change the culture of our operating room. Our efforts have prepared us for successfully implementing a standardized checklist to improve operating room safety throughout our entire system. Based on these findings we recommend a multimodal approach to improving operating room safety.

US Department of Energy Radiological Control Manual

International Nuclear Information System (INIS)

1992-06-01

This manual establishes practices for the conduct of radiological control activities. The Manual states DOE's positions and views on the best courses of action currently available in the area of radiological controls. Accordingly, the provisions in the Manual should be viewed by contractors as an acceptable technique, method or solution for fulfilling their duties and responsibilities. This Manual shall be used by DOE in evaluating the performance of its contractors. (VC)

Management of a comprehensive radiation safety program in a major American University and affiliated academic medical center

International Nuclear Information System (INIS)

Yoshizumi, T.T.; Reiman, R.E.; Vylet, V.; Clapp, J.R.; Thomann, W.R.; Lyles, K.W.

2000-01-01

Duke University, which operates under eight radiation licenses issued by the State of North Carolina, consists of a leading medical center including extensive inpatient and outpatient facilities, a medical school, biomedical research labs, and an academic campus including two major accelerator facilities. The Nuclear Medicine and Radiation Oncology departments handle over 40,000 diagnostic and therapeutic procedures annually, including approximately 160 radioiodine therapeutic cases. In biomedical research labs, about 300 professors are authorized to use radioactive materials. Over 2,000 radiation workers are identified on campus. Over the past two years, we have transformed the existing radiation safety program into a more responsive and more accountable one. Simultaneously, the institutional 'culture' changed, and the Radiation Safety Division came to be viewed as a helpful ally by investigators. The purpose of this paper is to present our experiences that have made this transformation possible. Our initiatives included; (a) defining short-term and long-term goals; (b) establishing a definitive chain of authority; (c) obtaining an external review by a consultant Health Physicist; (d) improving existing radiation safety programs; (e) reorganizing the Radiation Safety Division, with creation of multidisciplinary professional staff positions; (f) implementing campus-wide radiation safety training, (g) increasing technician positions; (h) establishing monthly medical center radiation safety executive meeting. As a result progress made at the Divisional level includes; (a) culture change by recruiting professionals with academic credentials and recent college graduates; (b) implementing weekly staff meetings and monthly quality assurance meetings; (c) achieving academic prominence by publishing and presenting papers in national meetings; (d) senior staff achieving faculty appointments with academic departments; (e) senior staff participating in graduate student

Safety criteria for the acquisition of meat in Brazilian University restaurants

Directory of Open Access Journals (Sweden)

Marizete Oliveira de Mesquita

2014-03-01

Full Text Available The present study's objective was to analyze the procedures aimed at guaranteeing sanitary conditions when acquiring meat. The study was conducted with university restaurants of the Federal Institutions of Higher Education (IFES located in the five regions of Brazil. Data were collected using a questionnaire and an evaluation list, which was available online to restaurant professionals. The results showed that restaurants chose one or two types of meat, the most frequent of which were beef and chicken. In restaurants managed by the IFES, the acquisition of raw material occurred by bidding. For vendor selection, the restaurants required product registration with the Inspection Service and requested regulation of the supplier by the Health Surveillance. Monitoring was carried out through a technical visit to the supplier and a review of the past records of the supplier. A higher percentage of restaurants in the Southeast region met appropriate sanitary and hygienic criteria for the receipt of meat, followed by the South, Midwest, Northeast and North. We conclude that restaurants meet most of the safety criteria set in the legislation. However, some weaknesses are evident in the physical and functional structure, the system of transportation of raw material and the records of control measures at the place of reception.

Safety analysis report for packaging: neutron shipping cask, model 4T

International Nuclear Information System (INIS)

Peterson, R.T.

1977-01-01

This Safety Analysis Report for Packaging demonstrates that the neutron shipping cask can safely transport, in solid or powder form, all isotopes of uranium, plutonium, americium, curium, berkelium, californium, einsteinium, and fermium. The cask and its contents are described. It also evaluates transport conditions, structural parameters (e.g., load resistance, pressure and impact effects, lifting and tiedown devices), and shielding. Finally, it discusses compliance with Chapter 0529 of the Energy Research and Development Administration Manual, Safety Standards for the Packaging of Fissile and Other Radioactive Materials

Remodeling Strategic Staff Safety and Security Risks Management in Nigerian Tertiary Institutions

Directory of Open Access Journals (Sweden)

Sunday S. AKPAN

2015-10-01

Full Text Available This paper examined safety and security risk management in tertiary institutions in Nigeria. The frequent attacks at workplace, especially schools, have placed safety and security in the front burner of discussion in both business and political circles. This therefore, forms the imperative for the conduct of this study. The work adopted a cross sectional survey research design and collected data from respondents who are security personnel of the University of Uyo. Analysis of data was done with simple percentage statistics while the research hypotheses were tested with mean and simple regression and correlation statistics. The findings of the study revealed that assassination, kidnappings and bombings were principal risk incidents threatening the safety and security of staff in University of Uyo. A significant positive relationship was found between the funding of security management and workers’ performance. It was discovered specifically that employment screening, regular training of security personnel, regular safety and security meetings and strategic security policy formation were the main strategies for managing safety and security in University of Uyo. The paper concluded that safety and security management and control involves every worker (management and staff of University of Uyo. It was recommended, among others, that management should be more committed to safety and security management in the University by means of making safety and security issues an integral part of University’s strategic plan and also by adopting the management line model – one form of management structure-where safety and security are located, with other general management responsibilities. This way, the resurgent cases of kidnapping, hired assassination, etc. would be reduced if not completely eradicated in the University.

75 FR 4134 - Pipeline Safety: Leak Detection on Hazardous Liquid Pipelines

Science.gov (United States)

2010-01-26

... safety study on pipeline Supervisory Control and Data Acquisition (SCADA) systems (NTSB/SS-05/02). The... indications of a leak on the SCADA interface was the impetus for this study. The NTSB examined 13 hazardous... pipelines, the line balance technique for leak detection can often be performed with manual calculations...

Reconceptualising manual therapy skills in contemporary practice

DEFF Research Database (Denmark)

Rabey, Martin; Hall, Toby; Hebron, Clair

2017-01-01

With conflicting evidence regarding the effectiveness of manual therapy calls have arisen within some quarters of the physiotherapy profession challenging the continued use of manual skills for assessment and treatment. A reconceptualisation of the importance of manual examination findings is put...

Using Pesticides: Commercial Applicator Manual, Texas. Agricultural Pest Control - Field Crop Pest Control, Fruit and Vegetable Pest Control, Weed and Brush Control.

Science.gov (United States)

Texas A and M Univ., College Station. Texas Agricultural Extension Service.

This document is designed to provide commercial pesticide applicators with practical information and regulations required by the Texas Department of Agriculture. The manual includes two major sections. The first section discusses labels and labeling, pesticides, aerial application, ground application, pesticide safety, pests and pest damage,…

Comparison of characteristics of femtosecond laser-assisted anterior capsulotomy versus manual continuous curvilinear capsulorrhexis: A meta-analysis of 5-year results.

Science.gov (United States)

Ali, Muhammad Hassaan; Ullah, Samee; Javaid, Usman; Javaid, Mamoona; Jamal, Samreen; Butt, Nadeem Hafeez

2017-10-01

To perform a meta-analysis on the precision and safety of femtosecond laser-assisted anterior capsulotomy versus conventional manual continuous curvilinear capsulorrhexis. This meta-analysis was conducted from February 2010 to November 2014. Literature search on PubMed, Google Scholar, ExcerptaMedica database and Cochrane Library was done to identify randomised controlled trials and case-control studies. SPSS 20 was used for data analysis. Of the 10 articles included, there were 3(30%) randomised controlled trials and 7(70%) non-randomised controlled trials. The meta-analysis was based on a total of 2,882eyes. Of them, 1,498(51.97%) underwent femtosecond laser-assisted capsulotomy and 1,384(48.02%) underwent manual continuous curvilinear capsulorrhexis. The diameter of the capsulotomy and the rates of anterior capsule tear showed no statistical difference between the femtosecond laser group and the manual capsulorrhexis group (p=0.29 and p=0.68). In terms of circularity of capsulotomy, femtosecond laser group had a more significant advantage than the manual capsulorrhexis group (pmanual continuous curvilinear capsulorrhexis.

Laser safety at high profile laser facilities

International Nuclear Information System (INIS)

Barat, K.

2010-01-01

Complete text of publication follows. Laser safety has been an active concern of laser users since the invention of the laser. Formal standards were developed in the early 1970's and still continue to be developed and refined. The goal of these standards is to give users guidance on the use of laser and consistent safety guidance and requirements for laser manufacturers. Laser safety in the typical research setting (government laboratory or university) is the greatest challenge to the laser user and laser safety officer. This is due to two factors. First, the very nature of research can put the user at risk; consider active manipulation of laser optics and beam paths, and user work with energized systems. Second, a laser safety culture that seems to accept laser injuries as part of the graduate student educational process. The fact is, laser safety at research settings, laboratories and universities still has long way to go. Major laser facilities have taken a more rigid and serious view of laser safety, its controls and procedures. Part of the rationale for this is that these facilities draw users from all around the world presenting the facility with a work force of users coming from a wide mix of laser safety cultures. Another factor is funding sources do not like bad publicity which can come from laser accidents and a poor safety record. The fact is that injuries, equipment damage and lost staff time slow down progress. Hence high profile/large laser projects need to adapt a higher safety regimen both from an engineering and administrative point of view. This presentation will discuss all these points and present examples. Acknowledgement. This work has been supported by the University of California, Director, Office of Science.

Behavior of Engineering Students in Kuwait University

OpenAIRE

M. A. Al-Ajmi; R. S. Al-Kandari

2015-01-01

This initial study is concerned with the behavior of engineering students in Kuwait University which became a concern due to the global issues of education in all levels. A survey has been conducted to identify academic and societal issues affecting the engineering student performance. The study is drawing major conclusions with regard to private tutoring and the online availability of textbooks’ solution manuals.

SACS2: Dynamic and Formal Safety Analysis Method for Complex Safety Critical System

International Nuclear Information System (INIS)

Koh, Kwang Yong; Seong, Poong Hyun

2009-01-01

Fault tree analysis (FTA) is one of the most widely used safety analysis technique in the development of safety critical systems. However, over the years, several drawbacks of the conventional FTA have become apparent. One major drawback is that conventional FTA uses only static gates and hence can not capture dynamic behaviors of the complex system precisely. Although several attempts such as dynamic fault tree (DFT), PANDORA, formal fault tree (FFT) and so on, have been made to overcome this problem, they can not still do absolute or actual time modeling because they adapt relative time concept and can capture only sequential behaviors of the system. Second drawback of conventional FTA is its lack of rigorous semantics. Because it is informal in nature, safety analysis results heavily depend on an analyst's ability and are error-prone. Finally reasoning process which is to check whether basic events really cause top events is done manually and hence very labor-intensive and timeconsuming for the complex systems. In this paper, we propose a new safety analysis method for complex safety critical system in qualitative manner. We introduce several temporal gates based on timed computational tree logic (TCTL) which can represent quantitative notion of time. Then, we translate the information of the fault trees into UPPAAL query language and the reasoning process is automatically done by UPPAAL which is the model checker for time critical system

Bioluminescent hydrocarbonclastic bacteria of the Niger Delta

African Journals Online (AJOL)

Administrator

2007-02-19

Feb 19, 2007 ... 1Health Safety and Environment Shell Petroleum Company of Nigeria, Port Harcourt, Nigeria. 2Department of Microbiology, Faculty of Science, University of Port Harcourt, ..... Bergey's The shorter Manual of Determinative.

Aircraft operations management manual

Science.gov (United States)

1992-01-01

The NASA aircraft operations program is a multifaceted, highly diverse entity that directly supports the agency mission in aeronautical research and development, space science and applications, space flight, astronaut readiness training, and related activities through research and development, program support, and mission management aircraft operations flights. Users of the program are interagency, inter-government, international, and the business community. This manual provides guidelines to establish policy for the management of NASA aircraft resources, aircraft operations, and related matters. This policy is an integral part of and must be followed when establishing field installation policy and procedures covering the management of NASA aircraft operations. Each operating location will develop appropriate local procedures that conform with the requirements of this handbook. This manual should be used in conjunction with other governing instructions, handbooks, and manuals.

OASIS User Manual

CERN Document Server

Bojtar, L

2009-01-01

The OASIS system has been operational for years now. After a long development the project has reached a state where the number of features it provides exceeds largely what most of its users knows about. The author felt it was time to write a user manual explaining all the functionality of the viewer application. This document is a user manual, concentrating on the functionality of the viewer from the user’s point of view. There are already documents available on the project’s web site about the technical aspects at http://project-oasis.web.cern.ch/project-oasis/presentations.htm . There was an attempt to produce a tutorial on the viewer, but it didn’t get much further than the table of contents, that however is well thought. The structure of this user manual follows the same principle, the basic and most often used features are grouped together. Advanced or less often used features are described in a separate chapter. There is a second organizational principle, features belong to different levels: chann...

Manually controlled neutron-activation system

International Nuclear Information System (INIS)

Johns, R.A.; Carothers, G.A.

1982-01-01

A manually controlled neutron activation system, the Manual Reactor Activation System, was designed and built and has been operating at one of the Savannah River Plant's production reactors. With this system, samples can be irradiated for up to 24 hours and pneumatically transferred to a shielded repository for decay until their activity is low enough for them to be handled at a radiobench. The Manual Reactor Activation System was built to provide neutron activation of solid waste forms for the Alternative Waste Forms Leach Testing Program. Neutron activation of the bulk sample prior to leaching permits sensitive multielement radiometric analyses of the leachates

Pesticide Safety for Non-Certified Mixers, Loaders and Applicators = Uso Seguro de Pesticidas para Mezcladores, Cargadores y Aplicadores no Certificados.

Science.gov (United States)

Poli, Bonnie; Fluker, Sam S.

Written in English and Spanish and completely illustrated, this manual provides basic safety information for pesticide workers. Mixers, loaders, and applicators work with pesticides at their greatest strength and have the highest risk of poisoning. Understanding the pesticide label is the first step to pesticide safety. The words…

The minimal manual: is less really more?

NARCIS (Netherlands)

Lazonder, Adrianus W.; van der Meij, Hans

1993-01-01

Carroll, Smith-Kerker, Ford and Mazur-Rimetz (The minimal manual, Human-Computer Interaction , 3, 123-153, 1987) have introduced the minimal manual as an alternative to standard self-instruction manuals. While their research indicates strong gains, only a few attempts have been made to validate

Improving patient safety via automated laboratory-based adverse event grading.

Science.gov (United States)

Niland, Joyce C; Stiller, Tracey; Neat, Jennifer; Londrc, Adina; Johnson, Dina; Pannoni, Susan

2012-01-01

The identification and grading of adverse events (AEs) during the conduct of clinical trials is a labor-intensive and error-prone process. This paper describes and evaluates a software tool developed by City of Hope to automate complex algorithms to assess laboratory results and identify and grade AEs. We compared AEs identified by the automated system with those previously assessed manually, to evaluate missed/misgraded AEs. We also conducted a prospective paired time assessment of automated versus manual AE assessment. We found a substantial improvement in accuracy/completeness with the automated grading tool, which identified an additional 17% of severe grade 3-4 AEs that had been missed/misgraded manually. The automated system also provided an average time saving of 5.5 min per treatment course. With 400 ongoing treatment trials at City of Hope and an average of 1800 laboratory results requiring assessment per study, the implications of these findings for patient safety are enormous.

Effectiveness of an automatic manual wheelchair braking system in the prevention of falls.

Science.gov (United States)