WorldWideScience

Sample records for safety health es

  1. Hanford Site Environment Safety and Health (ES and H) FY 1999 and FY 2000 Execution Commitment Summary

    Energy Technology Data Exchange (ETDEWEB)

    REEP, I.E.

    1999-12-01

    All sites in the U.S. Department of Energy (DOE) Complex prepare this report annually for the DOE Office of Environment, Safety and Health (EH). The purpose of this report is to provide a summary of the previous and current year's Environment, Safety and Health (ES&H) execution commitments and the S&H resources that support these activities. The fiscal year (FY) 1999 and 2000 information (Sieracki 1999) and data contained in the ''Hanford Site Environment, Safety and Health Fiscal Year 2001 Budget-Risk Management Summary'' (RL 1999) were the basis for preparing this report. Fiscal year 2000 finding of Office of Environmental Management (EM) and Office of Nuclear Energy, Science and Technology (NE) activities is based on the President's budget of $1,065.1 million and $28.0 million, plus $2.7 million carryover finding, respectively, as of October 31, 1999. Any funding changes as a result of the Congressional appropriation process will be reflected in the Fiscal Year 2002 ES&H Budget-Risk Management Summary to be issued in May 2000. This report provides the end-of-year status of FY 1999 ES&H execution commitments, including actual S&H expenditures, and describes planned FY 2000 ES&H execution commitments and the S&H resources needed to support those activities. This requirement is included in the ES&H ''Guidance for FY200l Budget Formulations and Execution'' (DOE 1999).

  2. Richland Operations (DOE-RL) Environmental Safety Health (ES and H) FY 2000 and FY 2001 Execution Commitment Summary

    Energy Technology Data Exchange (ETDEWEB)

    REEP, I.E.

    2000-12-01

    All sites in the U.S. Department of Energy (DOE) Complex prepare this report annually for the DOE Office of Environment, Safety and Health (EH). The purpose of this report is to provide a summary of the previous and current year's Environment, Safety and Health (ES&H) execution commitments and the Safety and Health (S&H) resources that support these activities. The fiscal year (FY) 2000 and 2001 information and data contained in the Richland Operations Environment, Safefy and Health Fiscal Year 2002 Budget-Risk Management Summary (RL 2000a) were the basis for preparing this report. Fiscal year 2001 activities are based on the President's Amended Congressional Budget Request of $689.6 million for funding Ofice of Environmental Management (EM) $44.0 million for Fast Flux Test Facility standby less $7.0 million in anticipated DOE, Headquarters holdbacks for Office of Nuclear Energy, Science and Technology (NE); and $55.3 million for Safeguards and Security (SAS). Any funding changes as a result of the Congressional appropriation process will be reflected in the Fiscal Year 2003 ES&H Budget-Risk Management Summary to be issued in May 2001. This report provides the end-of-year status of FY 2000 ES&H execution commitments, including actual S&H expenditures, and describes planned FY 2001 ES&H execution commitments and the S&H resources needed to support those activities. This requirement is included in the ES&H guidance contained in the FY 2002 Field Budget Call (DOE 2000).

  3. Guidance for implementing an environmental, safety and health assurance program. Volume 2. A model plan for environmental, safety and health staff audits and appraisals

    International Nuclear Information System (INIS)

    Ellingson, A.C.

    1980-09-01

    This is 1 of 15 documents designed to illustrate how an Environmental, Safety and Health (ES and H) Assurance Program may be implemented. The generic definition of ES and H Assurance Programs is given in a companion document entitled An Environmental, Safety and Health Assurance Program Standard. This document is concerned with ES and H audit and appraisal activities of an ES and H Staff Organization as they might be performed in an institution whose ES and H program is based upon the ES and H Assurance Program Standard. An annotated model plan for ES and H Staff audits and appraisals is presented and discussed

  4. Environment, safety and health progress assessment manual

    International Nuclear Information System (INIS)

    1992-12-01

    On June 27, 1989, the Secretary of Energy announced a 1O-Point Initiative to strengthen environment,safety, and health (ES ampersand H) programs, and waste management activities at involved conducting DOE production, research, and testing facilities. One of the points independent Tiger Team Assessments of DOE operating facilities. The Office of Special Projects (OSP), EH-5, in the Office of the Assistant Secretary for Environment, Safety and Health, EH-1, was assigned the responsibility to conduct the Tiger Team Assessments. Through June 1992, a total of 35 Tiger Team Assessments were completed. The Secretary directed that Corrective Action Plans be developed and implemented to address the concerns identified by the Tiger Teams. In March 1991, the Secretary approved a plan for assessments that are ''more focused, concentrating on ES ampersand H management, ES ampersand H corrective actions, self-assessment programs, and root-cause related issues.'' In July 1991, the Secretary approved the initiation of ES ampersand H Progress Assessments, as a followup to the Tiger Team Assessments, and in the continuing effort to institutionalize the self-assessment process and line management accountability in the ES ampersand H areas. This volume contains appendices to the Environment, Safety and Health Progress Assessment Manual

  5. Guidance for implementing an environmental, safety, and health-assurance program. Volume 15. A model plan for line organization environmental, safety, and health-assurance programs

    Energy Technology Data Exchange (ETDEWEB)

    Ellingson, A.C.; Trauth, C.A. Jr.

    1982-01-01

    This is 1 of 15 documents designed to illustrate how an Environmental, Safety and Health (ES and H) Assurance Program may be implemented. The generic definition of ES and H Assurance Programs is given in a companion document entitled An Environmental, Safety and Health Assurance Program Standard. This particular document presents a model operational-level ES and H Assurance Program that may be used as a guide by an operational-level organization in developing its own plan. The model presented here reflects the guidance given in the total series of 15 documents.

  6. Guidance for implementing an environmental, safety, and health assurance program. Volume 10. Model guidlines for line organization environmental, safety and health audits and appraisals

    International Nuclear Information System (INIS)

    Ellingson, A.C.

    1981-10-01

    This is 1 of 15 documents designed to illustrate how an Environmental, Safety and Health (ES and H) Assurance Program may be implemented. The generic definition of ES and H Assurance Programs is given in a companion document entitled An Environmental, Safety and Health Assurance Program Standard. The Standard specifies that the operational level of an institution must have an internal assurance function, and this document provides guidance for the audit/appraisal portion of the operational level's ES and H program. The appendixes include an ES and H audit checklist, a sample element rating guide, and a sample audit plan for working level line organization internal audits

  7. Environment, Safety, and Health Self-Assessment Report, Fiscal Year 2008

    Energy Technology Data Exchange (ETDEWEB)

    Chernowski, John

    2009-02-27

    Lawrence Berkeley National Laboratory's Environment, Safety, and Health (ES&H) Self-Assessment Program ensures that Integrated Safety Management (ISM) is implemented institutionally and by all divisions. The Self-Assessment Program, managed by the Office of Contract Assurance (OCA), provides for an internal evaluation of all ES&H programs and systems at LBNL. The functions of the program are to ensure that work is conducted safely, and with minimal negative impact to workers, the public, and the environment. The Self-Assessment Program is also the mechanism used to institute continuous improvements to the Laboratory's ES&H programs. The program is described in LBNL/PUB 5344, Environment, Safety, and Health Self-Assessment Program and is composed of four distinct assessments: the Division Self-Assessment, the Management of Environment, Safety, and Health (MESH) review, ES&H Technical Assurance, and the Appendix B Self-Assessment. The Division Self-Assessment uses the five core functions and seven guiding principles of ISM as the basis of evaluation. Metrics are created to measure performance in fulfilling ISM core functions and guiding principles, as well as promoting compliance with applicable regulations. The five core functions of ISM are as follows: (1) Define the Scope of Work; (2) Identify and Analyze Hazards; (3) Control the Hazards; (4) Perform the Work; and (5) Feedback and Improvement. The seven guiding principles of ISM are as follows: (1) Line Management Responsibility for ES&H; (2) Clear Roles and Responsibilities; (3) Competence Commensurate with Responsibilities; (4) Balanced Priorities; (5) Identification of ES&H Standards and Requirements; (6) Hazard Controls Tailored to the Work Performed; and (7) Operations Authorization. Performance indicators are developed by consensus with OCA, representatives from each division, and Environment, Health, and Safety (EH&S) Division program managers. Line management of each division performs the

  8. Environment, safety and health progress assessment manual

    International Nuclear Information System (INIS)

    1992-12-01

    On June 27, 1989, the Secretary of Energy announced a 10-Point Initiative to strengthen environment, safety, and health (ES ampersand H) programs, and waste management activities at DOE production, research, and testing facilities. One of the points involved conducting dent Tiger Team Assessments of DOE operating facilities. The Office of Special independent Projects (OSP), EH-5, in the Office of the Assistant Secretary for Environment, Safety and Health, EH-1, was assigned the responsibility to conduct the Tiger Team Assessments. Through June 1992, a total of 35 Tiger Team Assessments were completed. The Secretary directed that Corrective Action Plans be developed and implemented to address the concerns identified by the Tiger Teams. In March 1991, the Secretary approved a plan for assessments that are ''more focused, concentrating on ES ampersand H management, ES ampersand H corrective actions, self-assessment programs, and root-cause related issues.'' In July 1991, the Secretary approved the initiation of ES ampersand H Progress Assessments, as a followup to the Tiger Team Assessments, and in the continuing effort to institutionalize the self-assessment process and line management accountability in the ES ampersand H areas. This manual documents the processes to be used to perform the ES ampersand H Progress Assessments. It was developed based upon the lessons learned from Tiger Team Assessments, the two pilot Progress Assessments, and Progress Assessments that have been completed. The manual will be updated periodically to reflect lessons learned or changes in policy

  9. Environment, Safety, and Health (ES&H) self-assessment guide

    Energy Technology Data Exchange (ETDEWEB)

    Reese, R.T.; Golden, N.L.; Romero, J.R.; Yesner, S.

    1997-06-01

    This document has been prepared as a guide for conducting self-assessments of ES&H functional programs and organizational (line) implementation of these programs. This guide is intended for use by individuals and/or teams involved in or familiar with ES&H programs and line operations (e.g., the {open_quotes}self{close_quotes}in self-assessment). Essential elements of the self-assessment process are described including: schedule and priorities, scope and approach, assessment criteria (e.g., performance objectives and measures), information gathering and analysis techniques, and documentation of planning efforts and results. The appendices in this guide include: (1) an assessment prioritization process, (2) generic performance objectives for line implementation and for ES&H functional programs, (3) sources for ES&H assessment information, (4) systemic factors (developed for SNL`s root cause analysis program), (5) Lockheed Martin audit questions for management systems, compliance and validation, and specific areas and concerns, (6) DOE facility representatives checklist, and (7) assessment tools and resources developed at SNL and other DOE/Lockheed Martin sites. This document is a product of the efforts associated with the SNL ES&H Oversight Pilot Project conducted from June 1995 to January 1997. This Pilot was part of the overall initiative by DOE to reduce burdensome agency oversight by placing greater reliance on contractor self-assessment.

  10. UMTRA project office federal employee occupational safety and health program plan

    International Nuclear Information System (INIS)

    1994-06-01

    This document establishes the Federal Employee Occupational Safety and Health (FEOSH) Program for the US Department of Energy (DOE) Uranium Mill Tailings Remedial Action (UMTRA) Project Office. This program will ensure compliance with applicable requirements of DOE Order 3790.1B and DOE Albuquerque Operations Office (AL) Order 3790.lA. FEOSH Program responsibilities delegated by the DOE-AL to the UMTRA Project Office by AL Order 3790.1A also are assigned. The UMTRA Project Office has developed the UMTRA Project Environmental, Safety, and Health (ES ampersand H) Plan (DOE, 1992), which establishes the basic programmatic ES ampersand H requirements for all participants on the UMTRA Project. The ES ampersand H plan is designed primarily to cover remedial action activities at UMTRA sites and defines the ES ampersand H responsibilities of both the UMTRA Project Office and its contractors. The UMTRA FEOSH Program described herein is a subset of the overall UMTRA ES ampersand H program and covers only federal employees working on the UMTRA Project

  11. Hanford Site Environmental Safety and Health Fiscal Year 2001 Budget-Risk management summary

    Energy Technology Data Exchange (ETDEWEB)

    REEP, I.E.

    1999-05-12

    The Hanford Site Environment, Safety and Health (ES&H) Budget-Risk Management Summary report is prepared to support the annual request to sites in the U.S. Department of Energy (DOE) Complex by DOE, Headquarters. The request requires sites to provide supplementary crosscutting information related to ES&H activities and the ES&H resources that support these activities. The report includes the following: (1) A summary status of fiscal year (FY) 1999 ES&H performance and ES&H execution commitments; (2)Status and plans of Hanford Site Office of Environmental Management (EM) cleanup activities; (3) Safety and health (S&H) risk management issues and compliance vulnerabilities of FY 2001 Target Case and Below Target Case funding of EM cleanup activities; (4) S&H resource planning and crosscutting information for FY 1999 to 2001; and (5) Description of indirect-funded S&H activities.

  12. Environment, Safety and Health Progress Assessment of the Hanford Site

    International Nuclear Information System (INIS)

    1992-05-01

    This report documents the result of the US Department of Energy (DOE) Environment, Safety and Health (ES ampersand H) Progress Assessment of the Hanford Site, in Richland, Washington. The assessment, which was conducted from May 11 through May 22, 1992, included a selective-review of the ES ampersand H management systems and programs of the responsible DOE Headquarters Program Offices the DOE Richland Field Office, and the site contractors. The ES ampersand H Progress Assessments are part of the Secretary of Energy's continuing effort to institutionalize line management accountability and the self-assessment process throughout DOE and its contractor organizations. The purpose of the Hanford Site ES ampersand H Progress Assessment is to provide the Secretary with an independent assessment of the adequacy and effectiveness of the DOE and contractor management structures, resources, and systems to address ES ampersand H problems and requirements. They are not intended to be comprehensive compliance assessments of ES ampersand H activities. The point of reference for assessing programs at the Hanford Site was, for the most part, the Tiger Team Assessment of the Hanford Site, which was conducted from May 21 through July 18, 1990. A summary of issues and progress in the areas of environment, safety and health, and management is included

  13. Environmental, Safety, and Health Plan for the remedial investigation/feasibility study at Oak Ridge National Laboratory, Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    1993-05-01

    This Environmental, Safety, and Health (ES ampersand H) Plan presents the concepts and methodologies to be followed during the remedial investigation/feasibility study (RI/FS) for Oak Ridge National Laboratory (ORNL) to protect the health and safety of employees, the public, and the environment. This ES ampersand H Plan acts as a management extension for ORNL and Martin Marietta Energy Systems, Inc. (Energy Systems) to direct and control implementation of the project ES ampersand H program. The subsections that follow describe the program philosophy, requirements, quality assurance measures, and methods for applying the ES ampersand H program to individual waste area grouping (WAG) remedial investigations. Hazardous work permits (HWPs) will be used to provide task-specific health and safety requirements

  14. Environment, safety, and health manual, closeout report

    International Nuclear Information System (INIS)

    1975-12-01

    A coordination draft of the Environment, Safety, and Health (ES and H) manual was submitted on 2 September 1975. Comments provided by Operational Safety personnel were being incorporated by a task team when the effort was terminated on 31 October 1975. This report documents the development history of the manual and provides a status of the manual up to the time the efforts were discontinued. Also discussed are issues which effect completion of the manual. Additionally a plan for completion of the manual is suggested

  15. UMTRA Project: Environment, Safety, and Health Plan

    International Nuclear Information System (INIS)

    1995-02-01

    The US Department of Energy has prepared this UMTRA Project Environment, Safety, and Health (ES and H) Plan to establish the policy, implementing requirements, and guidance for the UMTRA Project. The requirements and guidance identified in this plan are designed to provide technical direction to UMTRA Project contractors to assist in the development and implementation of their ES and H plans and programs for UMTRA Project work activities. Specific requirements set forth in this UMTRA Project ES and H Plan are intended to provide uniformity to the UMTRA Project's ES and H programs for processing sites, disposal sites, and vicinity properties. In all cases, this UMTRA Project ES and H Plan is intended to be consistent with applicable standards and regulations and to provide guidance that is generic in nature and will allow for contractors' evaluation of site or contract-specific ES and H conditions. This plan specifies the basic ES and H requirements applicable to UMTRA Project ES and H programs and delineates responsibilities for carrying out this plan. DOE and contractor ES and H personnel are expected to exercise professional judgment and apply a graded approach when interpreting these guidelines, based on the risk of operations

  16. Environment, Safety and Health progress assessment of the Idaho National Engineering Laboratory (INEL)

    International Nuclear Information System (INIS)

    1993-08-01

    The ES ampersand H Progress Assessments are part of the Department's continuous improvement process throughout DOE and its contractor organizations. The purpose of the INEL ES ampersand H Progress Assessment is to provide the Department with concise independent information on the following: (1) change in culture and attitude related to ES ampersand H activities; (2) progress and effectiveness of the ES ampersand H corrective actions resulting from previous Tiger Team Assessments; (3) adequacy and effectiveness of the ES ampersand H self-assessment programs of the DOE line organizations and the site management and operating contractor; and (4) effectiveness of DOE and contractor management structures, resources, and systems to effectively address ES ampersand H problems. It is not intended that this Progress Assessment be a comprehensive compliance assessments of ES ampersand H activities. The points of reference for assessing programs at the INEL were, for the most part, the 1991 INEL Tiger Team Assessment, the INEL Corrective Action Plan, and recent appraisals and self-assessments of INEL. Horizontal and vertical reviews of the following programmatic areas were conducted: Management: Corrective action program; self-assessment; oversight; directives, policies, and procedures; human resources management; and planning, budgeting, and resource allocation. Environment: Air quality management, surface water management, groundwater protection, and environmental radiation. Safety and Health: Construction safety, worker safety and OSHA, maintenance, packaging and transportation, site/facility safety review, and industrial hygiene

  17. US Department of Energy Environment, Safety and Health Progress Assessment of the Nevada Test Site

    Energy Technology Data Exchange (ETDEWEB)

    1992-08-01

    This report documents the result of the US Department of Energy (DOE) Environment, Safety, and Health (ES&H) Progress Assessment of the Nevada Test Site (NTS), Nye County, Nevada. The assessment, which was conducted from July 20 through August 4, 1992, included a selective review of the ES&H management systems and progress of the responsible DOE Headquarters Program Offices; the DOE Nevada Field Office (NV); and the site contractors. The ES&H Progress Assessments are part of the Secretary of Energy`s continuing effort to institutionalize line management accountability and the self-assessment process throughout DOE and its contractor organizations. This report presents a summary of issues and progress in the areas of environment, safety and health, and management.

  18. US Department of Energy Environment, Safety and Health Progress Assessment of the Nevada Test Site

    International Nuclear Information System (INIS)

    1992-08-01

    This report documents the result of the US Department of Energy (DOE) Environment, Safety, and Health (ES ampersand H) Progress Assessment of the Nevada Test Site (NTS), Nye County, Nevada. The assessment, which was conducted from July 20 through August 4, 1992, included a selective review of the ES ampersand H management systems and progress of the responsible DOE Headquarters Program Offices; the DOE Nevada Field Office (NV); and the site contractors. The ES ampersand H Progress Assessments are part of the Secretary of Energy's continuing effort to institutionalize line management accountability and the self-assessment process throughout DOE and its contractor organizations. This report presents a summary of issues and progress in the areas of environment, safety and health, and management

  19. Environment, safety and health, management and organization compliance assessment, West Valley Demonstration Program, West Valley, New York

    International Nuclear Information System (INIS)

    1989-08-01

    An Environment, Safety and Health ''Tiger Team'' Assessment was conducted at the West Valley Demonstration Project. The Tiger Team was chartered to conduct an onsite, independent assessment of WVDP's environment, safety and health (ES ampersand H) programs to assure compliance with applicable Federal and State laws, regulations, and standards, and Department of Energy Orders. The objective is to provide to the Secretary of Energy the following information: current ES ampersand H compliance status of each facility; specific noncompliance items; ''root causes'' for noncompliance items; evaluation of the adequacy of ES ampersand H organization and resources (DOE and contractor) and needed modifications; and where warranted, recommendations for addressing identified problem areas

  20. Environmental, Safety, and Health Plan for the remedial investigation/feasibility study at Oak Ridge National Laboratory, Oak Ridge, Tennessee. Revision 1, Environmental Restoration Program

    Energy Technology Data Exchange (ETDEWEB)

    Davis, C. M.; El-Messidi, O. E.; Cowser, D. K.; Kannard, J. R.; Carvin, R. T.; Will, III, A. S.; Clark, Jr., C.; Garland, S. B.

    1993-05-01

    This Environmental, Safety, and Health (ES&H) Plan presents the concepts and methodologies to be followed during the remedial investigation/feasibility study (RI/FS) for Oak Ridge National Laboratory (ORNL) to protect the health and safety of employees, the public, and the environment. This ES&H Plan acts as a management extension for ORNL and Martin Marietta Energy Systems, Inc. (Energy Systems) to direct and control implementation of the project ES&H program. The subsections that follow describe the program philosophy, requirements, quality assurance measures, and methods for applying the ES&H program to individual waste area grouping (WAG) remedial investigations. Hazardous work permits (HWPs) will be used to provide task-specific health and safety requirements.

  1. Safety Analysis Report for Packaging, Y-12 National Security Complex, Model ES-3100 Package with Bulk HEU Contents

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, James [Y-12 National Security Complex, Oak Ridge, TN (United States); Goins, Monty [Y-12 National Security Complex, Oak Ridge, TN (United States); Paul, Pran [Y-12 National Security Complex, Oak Ridge, TN (United States); Wilkinson, Alan [Y-12 National Security Complex, Oak Ridge, TN (United States); Wilson, David [Y-12 National Security Complex, Oak Ridge, TN (United States)

    2015-09-03

    This safety analysis report for packaging (SARP) presents the results of the safety analysis prepared in support of the Consolidated Nuclear Security, LLC (CNS) request for licensing of the Model ES-3100 package with bulk highly enriched uranium (HEU) contents and issuance of a Type B(U) Fissile Material Certificate of Compliance. This SARP, published in the format specified in the Nuclear Regulatory Commission (NRC) Regulatory Guide 7.9 and using information provided in UCID-21218 and NRC Regulatory Guide 7.10, demonstrates that the Y-12 National Security Complex (Y-12) ES-3100 package with bulk HEU contents meets the established NRC regulations for packaging, preparation for shipment, and transportation of radioactive materials given in Title 10, Part 71, of the Code of Federal Regulations (CFR) [10 CFR 71] as well as U.S. Department of Transportation (DOT) regulations for packaging and shipment of hazardous materials given in Title 49 CFR. To protect the health and safety of the public, shipments of adioactive materials are made in packaging that is designed, fabricated, assembled, tested, procured, used, maintained, and repaired in accordance with the provisions cited above. Safety requirements addressed by the regulations that must be met when transporting radioactive materials are containment of radioactive materials, radiation shielding, and assurance of nuclear subcriticality.

  2. Analysis of environment, safety, and health (ES{ampersand}H) management systems for Department of Energy (DOE) Defense Programs (DP) facilities

    Energy Technology Data Exchange (ETDEWEB)

    Neglia, A. V., LLNL

    1998-03-01

    The purpose of this paper is to provide a summary analysis and comparison of various environment, safety, and health (ES&H) management systems required of, or suggested for use by, the Departrnent of Energy Defense Programs` sites. The summary analysis is provided by means of a comparison matrix, a set of Vean diagrams that highlights the focus of the systems, and an `End Gate` filter diagram that integrates the three Vean diagrams. It is intended that this paper will act as a starting point for implementing a particular system or in establishing a comprehensive site-wide integrated ES&H management system. Obviously, the source documents for each system would need to be reviewed to assure proper implementation of a particular system. The matrix compares nine ES&H management systems against a list of elements generated by identifying the unique elements of all the systems. To simplify the matrix, the elements are listed by means of a brief title. An explanation of the matrix elements is provided in Attachment 2 entitled, `Description of System Elements.` The elements are categorized under the Total Quality Management (TQM) `Plan, Do, Check, Act` framework with the added category of `Policy`. (The TQM concept is explained in the `DOE Quality Management implementation Guidelines,` July 1997 (DOE/QM- 0008)). The matrix provides a series of columns and rows to compare the unique elements found in each of the management systems. A `V` is marked if the element is explicitly identified as part of the particular ES&H management system. An `X` is marked if the element is not found in the particular ES&H management system, or if it is considered to be inadequately addressed. A `?` is marked if incorporation of the element is not clear. Attachment I provides additional background information which explains the justification for the marks in the matrix cells. Through the Vean diagrams and the `End Gate` filter in Section 3, the paper attempts to pictorially display the focus of

  3. Specification Section 01065S ES&H for Service Contracts

    Energy Technology Data Exchange (ETDEWEB)

    Kirsch, Greg C. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

    2014-07-01

    Section Includes: Requirements and guidelines in performance of work concerning protection of environment and property, and the safety and health of Contractors, Sandia National Laboratories (SNL) and Department of Energy (DOE) employees, visitors to SNL, and members of the public. This Section is applicable only to Service Contracts that do not involve construction or construction-like activities. Construction and construction-like activities are covered by Section 01065, Environment, Safety and Health (ES&H) for Construction Contracts. The entire ES&H program shall focus on safe-by-design intent, understanding the technical basis for the work, identifying and controlling energy sources, unacceptable consequences, risk assessments, and positive verification.

  4. Environmental, Safety, and Health Plan for the remedial investigation of the liquid low-level waste tanks at Oak Ridge National Laboratory, Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    1991-09-01

    The Environmental, Safety, and Health (ES ampersand H) Plan presents the concepts and methodologies to be used during the Oak Ridge National Laboratory (ORNL) RI/FS project to protect the health and safety of employees, the public, and the environment. The ES ampersand H Plan acts as a management extension for ORNL and Energy Systems to direct and control implementation of the project ES ampersand H program. This report describes the program philosophy, requirements, quality assurance measures, and methods for applying the ES ampersand H program to individual task remedial investigations, project facilities, and other major tasks assigned to the project

  5. Oak Ridge National Laboratory Environmenal, Safety, and Health Management Plan

    International Nuclear Information System (INIS)

    1991-12-01

    The 1990 Tiger Team Appraisal of Oak Ridge National Laboratory (ORNL) revealed that neither Martin Marietta Energy Systems, Inc. (Energy Systems) nor ORNL had a strategic plan for Environmental, Safety, and Health (ES ampersand H) activities. There were no detailed plans describing ORNL's mission, objectives, and strategies for ES ampersand H activities. A number of plans do exist that cover various aspects of ES ampersand H. Their scope ranges from multiyear program plans to annual audit schedules to compliance plans to action plans from specific audits. However, there is not a single document that identifies the plans and the objectives they are to address. This document describes the strategic plan for ORNL and provides the linkage among existing plans. It gives a brief description of the organization and management of ES ampersand H activities at ORNL. The plan identifies the general strategies to be taken by ORNL, using the overall guidance from Energy Systems in its corporate ES ampersand H Strategic Plan. It also identifies more detailed plans for implementation of these strategies, where appropriate

  6. Environment, safety and health progress assessment of the Fernald Environmental Management Project (FEMP)

    International Nuclear Information System (INIS)

    1991-11-01

    This report documents the results of the Environment, Safety, and Health (ES ampersand H) Progress Assessment of the Fernald Environmental Management Project (FEMP), Fernald, Ohio, conducted from October 15 through October 25, 1991. The Secretary of Energy directed that small, focused, ES ampersand H Progress Assessments be performed as part of the continuing effort to institutionalize line management accountability and the self-assessment process in the areas of ES ampersand H. The FEMP assessment is the pilot assessment for this new program. The objectives for the FEMP ES ampersand H Progress Assessment were to assess: (1) how the FEMP has progressed since the 1989 Tiger Assessment; (2) how effectively the FEMP has corrected specific deficiencies and associated root causes identified by that team; and (3) whether the current organization, resources, and systems are sufficient to proactively manage ES ampersand H issues

  7. Environment, safety and health progress assessment of the Fernald Environmental Management Project (FEMP)

    Energy Technology Data Exchange (ETDEWEB)

    1991-11-01

    This report documents the results of the Environment, Safety, and Health (ES&H) Progress Assessment of the Fernald Environmental Management Project (FEMP), Fernald, Ohio, conducted from October 15 through October 25, 1991. The Secretary of Energy directed that small, focused, ES&H Progress Assessments be performed as part of the continuing effort to institutionalize line management accountability and the self-assessment process in the areas of ES&H. The FEMP assessment is the pilot assessment for this new program. The objectives for the FEMP ES&H Progress Assessment were to assess: (1) how the FEMP has progressed since the 1989 Tiger Assessment; (2) how effectively the FEMP has corrected specific deficiencies and associated root causes identified by that team; and (3) whether the current organization, resources, and systems are sufficient to proactively manage ES&H issues.

  8. NIF special equipment construction health and safety plan

    Energy Technology Data Exchange (ETDEWEB)

    Sawicki, R.H.

    1997-07-28

    The purpose of this plan is to identify how the construction and deployment activities of the National Ignition Facility (NIF) Special Equipment (SE) will be safely executed. This plan includes an identification of (1) the safety-related responsibilities of the SE people and their interaction with other organizations involved; (2) safety related requirements, policies, and documentation; (3) a list of the potential hazards unique to SE systems and the mechanisms that will be implemented to control them to acceptable levels; (4) a summary of Environmental Safety and Health (ES&H) training requirements; and (5) requirements of contractor safety plans that will be developed and used by all SE contractors participating in site activities. This plan is a subsidiary document to the NIF Construction Safety Program (CSP) and is intended to compliment the requirements stated therein with additional details specific to the safety needs of the SE construction-related activities. If a conflict arises between these two documents, the CSP will supersede. It is important to note that this plan does not list all of the potential hazards and their controls because the design and safety analysis process is still ongoing. Additional safety issues win be addressed in the Final Safety Analysis Report, Operational Safety Procedures (OSPs), and other plans and procedures as described in Section 3.0 of this plan.

  9. NIF special equipment construction health and safety plan

    International Nuclear Information System (INIS)

    Sawicki, R.H.

    1997-01-01

    The purpose of this plan is to identify how the construction and deployment activities of the National Ignition Facility (NIF) Special Equipment (SE) will be safely executed. This plan includes an identification of (1) the safety-related responsibilities of the SE people and their interaction with other organizations involved; (2) safety related requirements, policies, and documentation; (3) a list of the potential hazards unique to SE systems and the mechanisms that will be implemented to control them to acceptable levels; (4) a summary of Environmental Safety and Health (ES ampersand H) training requirements; and (5) requirements of contractor safety plans that will be developed and used by all SE contractors participating in site activities. This plan is a subsidiary document to the NIF Construction Safety Program (CSP) and is intended to compliment the requirements stated therein with additional details specific to the safety needs of the SE construction-related activities. If a conflict arises between these two documents, the CSP will supersede. It is important to note that this plan does not list all of the potential hazards and their controls because the design and safety analysis process is still ongoing. Additional safety issues win be addressed in the Final Safety Analysis Report, Operational Safety Procedures (OSPs), and other plans and procedures as described in Section 3.0 of this plan

  10. Environment, safety and health compliance assessment, Feed Materials Production Center, Fernald, Ohio

    Energy Technology Data Exchange (ETDEWEB)

    1989-09-01

    The Secretary of Energy established independent Tiger Teams to conduct environment, safety, and health (ES H) compliance assessments at US Department of Energy (DOE) facilities. This report presents the assessment of the Feed Materials Production Center (FMPC) at Fernald, Ohio. The purpose of the assessment at FMPC is to provide the Secretary with information regarding current ES H compliance status, specific ES H noncompliance items, evaluation of the adequacy of the ES H organizations and resources (DOE and contractor), and root causes for noncompliance items. Areas reviewed included performance under Federal, state, and local agreements and permits; compliance with Federal, state and DOE orders and requirements; adequacy of operations and other site activities, such as training, procedures, document control, quality assurance, and emergency preparedness; and management and staff, including resources, planning, and interactions with outside agencies.

  11. In Situ Vitrification Engineering-Scale Test ES-INEL-4, ES-INEL-5, ES-INEL-6, and ES-INEL-7 Test Plan

    International Nuclear Information System (INIS)

    Weidner, J.R.; Stoots, P.R.

    1990-10-01

    The In Situ Vitrification Engineering-Scale Tests ES-4, ES-5, ES-6, and ES-7 Product Characterization Test Plan describes the methods and procedures to be used or the physical and chemical characterization of the solid product(s) resulting from the Idaho National Engineering Laboratory engineering scale in situ vitrification tests ES-4, ES-5, ES-6, and ES-7. The goals of this Test Plan are to insure that the product characterization results are sufficient to meet the data needs of the In Situ Vitrification Program and are technically and legally defensible. Important issues addressed by the test plan include sampling and analysis strategy, sampling procedures, laboratory analysis, sample control and document management, equipment, data reporting and validation, quality assurance, specific routine procedures to assess data representativeness, safety and training program, and data management. 9 refs., 1 fig., 3 tabs

  12. Environmental Management Waste Management Facility (EMWMF) Site-Specific Health and Safety Plan, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    Flynn, N.C. Bechtel Jacobs

    2008-04-21

    The Bechtel Jacobs Company LLC (BJC) policy is to provide a safe and healthy workplace for all employees and subcontractors. The implementation of this policy requires that operations of the Environmental Management Waste Management Facility (EMWMF), located one-half mile west of the U.S. Department of Energy (DOE) Y-12 National Security Complex, be guided by an overall plan and consistent proactive approach to environment, safety and health (ES&H) issues. The BJC governing document for worker safety and health, BJC/OR-1745, 'Worker Safety and Health Program', describes the key elements of the BJC Safety and Industrial Hygiene (IH) programs, which includes the requirement for development and implementation of a site-specific Health and Safety Plan (HASP) where required by regulation (refer also to BJC-EH-1012, 'Development and Approval of Safety and Health Plans'). BJC/OR-1745, 'Worker Safety and Health Program', implements the requirements for worker protection contained in Title 10 Code of Federal Regulations (CFR) Part 851. The EMWMF site-specific HASP requirements identifies safe operating procedures, work controls, personal protective equipment, roles and responsibilities, potential site hazards and control measures, site access requirements, frequency and types of monitoring, site work areas, decontamination procedures, and outlines emergency response actions. This HASP will be available on site for use by all workers, management and supervisors, oversight personnel and visitors. All EMWMF assigned personnel will be briefed on the contents of this HASP and will be required to follow the procedures and protocols as specified. The policies and procedures referenced in this HASP apply to all EMWMF operations activities. In addition the HASP establishes ES&H criteria for the day-to-day activities to prevent or minimize any adverse effect on the environment and personnel safety and health and to meet standards that define acceptable

  13. Measuring and improving patient safety through health information technology: The Health IT Safety Framework.

    Science.gov (United States)

    Singh, Hardeep; Sittig, Dean F

    2016-04-01

    Health information technology (health IT) has potential to improve patient safety but its implementation and use has led to unintended consequences and new safety concerns. A key challenge to improving safety in health IT-enabled healthcare systems is to develop valid, feasible strategies to measure safety concerns at the intersection of health IT and patient safety. In response to the fundamental conceptual and methodological gaps related to both defining and measuring health IT-related patient safety, we propose a new framework, the Health IT Safety (HITS) measurement framework, to provide a conceptual foundation for health IT-related patient safety measurement, monitoring, and improvement. The HITS framework follows both Continuous Quality Improvement (CQI) and sociotechnical approaches and calls for new measures and measurement activities to address safety concerns in three related domains: 1) concerns that are unique and specific to technology (e.g., to address unsafe health IT related to unavailable or malfunctioning hardware or software); 2) concerns created by the failure to use health IT appropriately or by misuse of health IT (e.g. to reduce nuisance alerts in the electronic health record (EHR)), and 3) the use of health IT to monitor risks, health care processes and outcomes and identify potential safety concerns before they can harm patients (e.g. use EHR-based algorithms to identify patients at risk for medication errors or care delays). The framework proposes to integrate both retrospective and prospective measurement of HIT safety with an organization's existing clinical risk management and safety programs. It aims to facilitate organizational learning, comprehensive 360 degree assessment of HIT safety that includes vendor involvement, refinement of measurement tools and strategies, and shared responsibility to identify problems and implement solutions. A long term framework goal is to enable rigorous measurement that helps achieve the safety

  14. National ignition facility environment, safety, and health management plan

    International Nuclear Information System (INIS)

    1995-11-01

    The ES ampersand H Management Plan describes all of the environmental, safety, and health evaluations and reviews that must be carried out in support of the implementation of the National Ignition Facility (NIF) Project. It describes the policy, organizational responsibilities and interfaces, activities, and ES ampersand H documents that will be prepared by the Laboratory Project Office for the DOE. The only activity not described is the preparation of the NIF Project Specific Assessment (PSA), which is to be incorporated into the Programmatic Environmental Impact Statement for Stockpile Stewardship and Management (PEIS). This PSA is being prepared by Argonne National Laboratory (ANL) with input from the Laboratory participants. As the independent NEPA document preparers ANL is directly contracted by the DOE, and its deliverables and schedule are agreed to separately with DOE/OAK

  15. Health and safety manual

    International Nuclear Information System (INIS)

    1980-02-01

    The manual consists of the following chapters: general policies and administration; the Environmental Health and Safety Department; the Medical Services Department: biological hazards; chemical safety; confined space entry; cryogenic safety; electrical safety; emergency plans; engineering and construction; evacuations, trenching, and shoring; fire safety; gases, flammable and compressed; guarding, mechanical; ladders and scaffolds, work surfaces; laser safety; materials handling and storage; noise; personal protective equipment; pressure safety; radiation safety, ionizing and non-ionizing; sanitation; seismic safety; training, environmental health and safety; tools, power and hand-operated; traffic and transportation; and warning signs and devices

  16. Environment, Safety and Health Progress Assessment of the Argonne Illinois Site

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    This report documents the results of the US Department of Energy (DOE) Environment, Safety and Health (ES&H) Progress Assessment of the Argonne Illinois Site (AIS), near Chicago, Illinois, conducted from October 25 through November 9, 1993. During the Progress Assessment, activities included a selective review of the ES&H management systems and programs with principal focus on the DOE Office of Energy Research (ER); CH, which includes the Argonne Area Office; the University of Chicago; and the contractor`s organization responsible for operation of Argonne National Laboratory (ANL). The ES&H Progress Assessments are part of DOE`s continuing effort to institutionalize line management accountability and the self-assessment process throughout DOE and its contractor organizations. The purpose of the AIS ES&H Progress Assessment was to provide the Secretary of Energy, senior DOE managers, and contractor management with concise independent information on the following: change in culture and attitude related to ES&H activities; progress and effectiveness of the ES&H corrective actions resulting from the previous Tiger Team Assessment; adequacy and effectiveness of the ES&H self-assessment process of the DOE line organizations, the site management, and the operating contractor; and effectiveness of DOE and contractor management structures, resources, and systems to effectively address ES&H problems and new ES&H initiatives.

  17. Environment, Safety and Health Progress Assessment of the Argonne Illinois Site

    International Nuclear Information System (INIS)

    1993-11-01

    This report documents the results of the US Department of Energy (DOE) Environment, Safety and Health (ES ampersand H) Progress Assessment of the Argonne Illinois Site (AIS), near Chicago, Illinois, conducted from October 25 through November 9, 1993. During the Progress Assessment, activities included a selective review of the ES ampersand H management systems and programs with principal focus on the DOE Office of Energy Research (ER); CH, which includes the Argonne Area Office; the University of Chicago; and the contractor's organization responsible for operation of Argonne National Laboratory (ANL). The ES ampersand H Progress Assessments are part of DOE's continuing effort to institutionalize line management accountability and the self-assessment process throughout DOE and its contractor organizations. The purpose of the AIS ES ampersand H Progress Assessment was to provide the Secretary of Energy, senior DOE managers, and contractor management with concise independent information on the following: change in culture and attitude related to ES ampersand H activities; progress and effectiveness of the ES ampersand H corrective actions resulting from the previous Tiger Team Assessment; adequacy and effectiveness of the ES ampersand H self-assessment process of the DOE line organizations, the site management, and the operating contractor; and effectiveness of DOE and contractor management structures, resources, and systems to effectively address ES ampersand H problems and new ES ampersand H initiatives

  18. Environment, safety, and health regulatory implementation plan

    International Nuclear Information System (INIS)

    1993-01-01

    To identify, document, and maintain the Uranium Mill Tailings Remedial Action (UMTRA) Project's environment, safety, and health (ES ampersand H) regulatory requirements, the US Department of Energy (DOE) UMTRA Project Office tasked the Technical Assistance Contractor (TAC) to develop a regulatory operating envelope for the UMTRA Project. The system selected for managing the UMTRA regulatory operating envelope data bass is based on the Integrated Project Control/Regulatory Compliance System (IPC/RCS) developed by WASTREN, Inc. (WASTREN, 1993). The IPC/RCS is a tool used for identifying regulatory and institutional requirements and indexing them to hardware, personnel, and program systems on a project. The IPC/RCS will be customized for the UMTRA Project surface remedial action and groundwater restoration programs. The purpose of this plan is to establish the process for implementing and maintaining the UMTRA Project's regulatory operating envelope, which involves identifying all applicable regulatory and institutional requirements and determining compliance status. The plan describes how the Project will identify ES ampersand H regulatory requirements, analyze applicability to the UMTRA Project, and evaluate UMTRA Project compliance status

  19. Health and safety education for joint occupational health and safety committees

    Directory of Open Access Journals (Sweden)

    Myriam Mahecha Angulo

    2015-09-01

    Full Text Available Objective: To build a proposal to develop the educational process in health and safety joint committees aimed at safety and health at work (copasst. Methodology: Qualitative, descriptive study in which an in-depth interview to 32 copasst assets was made. Each interview was transcribed and interpreted by applying check with participants, finding meaningful statements, organizing groups of subjects, exhaustive description and validation with participants. The information was placed in the categories planning, organization, development, evaluation and feedback, emerging the following categories: responsible for processes management; planning, place and frequency of educational sessions; topics; format of sessions; involving/ development of sessions; understanding of the issues; applicability to daily life and work environment; applicability to personal/professional life and to the organization. Results: From emerging categories and according to the conceptual framework on adult health education and health and safety for workers, a participatory methodology for the development of educational processes with copasst was built. Conclusions: According to the statement by the members of the copasst, educational processes in health and safety, as they are developed at present, preclude them from achieving necessary competences to perform its functions, thus they are irrelevant.

  20. Environment, safety and health

    International Nuclear Information System (INIS)

    Luzianovich, L.Ch.; Fardeau, J.C.; Darras, M.

    2000-01-01

    Environment, safety and health were the three topics discussed by the WOC 8 working group of the worldwide gas congress. Environment protection has become a major preoccupation and constraint for natural gas industry at the dawn of the new millennium. It is closely linked with the safety of installation and with the health of workmen who exploit or use natural gas energy: methane emissions, health and safety in gas industry, environment management and evaluation. (J.S.)

  1. The Role of OSHA in Safety and Health. Module SH-02. Safety and Health.

    Science.gov (United States)

    Center for Occupational Research and Development, Inc., Waco, TX.

    This student module on the role of OSHA (Occupational Safety and Health Act) in Safety and Health is one of 50 modules concerned with job safety and health. This module looks at the OSHA Act, its aims, and the rights and responsibilities of employers and workers under the Act. Following the introduction, 16 objectives (each keyed to a page in the…

  2. Nuclear health and safety

    International Nuclear Information System (INIS)

    1991-04-01

    Numerous environmental, safety, and health problems found at other Department of Energy (DOE) defense nuclear facilities precipitated a review of these conditions at DOE's contractor-operated Pantex Plant, where our nation's nuclear weapons are assembled. This book focuses the review on examining key safety and health problems at Pantex and determining the need for external safety oversight of the plant

  3. Environmental, safety, and health engineering

    International Nuclear Information System (INIS)

    Woodside, G.; Kocurek, D.

    1997-01-01

    A complete guide to environmental, safety, and health engineering, including an overview of EPA and OSHA regulations; principles of environmental engineering, including pollution prevention, waste and wastewater treatment and disposal, environmental statistics, air emissions and abatement engineering, and hazardous waste storage and containment; principles of safety engineering, including safety management, equipment safety, fire and life safety, process and system safety, confined space safety, and construction safety; and principles of industrial hygiene/occupational health engineering including chemical hazard assessment, personal protective equipment, industrial ventilation, ionizing and nonionizing radiation, noise, and ergonomics

  4. Girlfriends' Health and Safety Tips

    Science.gov (United States)

    ... in Women? Women's Safety and Health Issues at Work Health Equity Girlfriends' Health and Safety Tips Recommend on Facebook Tweet Share Compartir Having friends is an important part of life. Celebrate female friendship and support your girlfriends by ...

  5. Health, Safety, and Environment Division

    Energy Technology Data Exchange (ETDEWEB)

    Wade, C [comp.

    1992-01-01

    The primary responsibility of the Health, Safety, and Environmental (HSE) Division at the Los Alamos National Laboratory is to provide comprehensive occupational health and safety programs, waste processing, and environmental protection. These activities are designed to protect the worker, the public, and the environment. Meeting these responsibilities requires expertise in many disciplines, including radiation protection, industrial hygiene, safety, occupational medicine, environmental science and engineering, analytical chemistry, epidemiology, and waste management. New and challenging health, safety, and environmental problems occasionally arise from the diverse research and development work of the Laboratory, and research programs in HSE Division often stem from these applied needs. These programs continue but are also extended, as needed, to study specific problems for the Department of Energy. The results of these programs help develop better practices in occupational health and safety, radiation protection, and environmental science.

  6. Nuclear health and safety

    International Nuclear Information System (INIS)

    1990-04-01

    This report summarizes the responsiveness of DOE and contractors to findings contained in DOE technical safety appraisals and environmental surveys. These appraisals and surveys have been done at DOE facilities and sites to find out the extent of the environmental, safety, and health problems and to prioritize them for corrective action. As of January 1990, DOE computer data showed over 1,700 safety and health problems and almost 1,300 environmental problems. The majority of these problems, however, have not yet been corrected. GAO also looked at the extent to which DOE has developed a computerized tracking system to monitor the status of its environmental, safety, and health problems. GAO found that the computer system lacks important information, such as various field office and independent appraisals. Inclusion of this information would provide a more complete picture of the problems at the site

  7. Pesticide Health and Safety Information

    Science.gov (United States)

    Animal Health Safe Use Practices Pest Control Food Safety Low Risk Pesticides Integrated Pest Management directed by the product label. Pesticides may be ingested if stored improperly in food or beverage ; Environment Human Health Animal Health Safe Use Practices Food Safety Environment Air Water Soil Wildlife

  8. DOE standard: Integration of environment, safety, and health into facility disposition activities. Volume 2: Appendices

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    This volume contains the appendices that provide additional environment, safety, and health (ES and H) information to complement Volume 1 of this Standard. Appendix A provides a set of candidate DOE ES and H directives and external regulations, organized by hazard types that may be used to identify potentially applicable directives to a specific facility disposition activity. Appendix B offers examples and lessons learned that illustrate implementation of ES and H approaches discussed in Section 3 of Volume 1. Appendix C contains ISMS performance expectations to guide a project team in developing and implementing an effective ISMS and in developing specific performance criteria for use in facility disposition. Appendix D provides guidance for identifying potential Applicable or Relevant and Appropriate Requirements (ARARs) when decommissioning facilities fall under the Comprehensive Environmental Response, Compensation, Liability Act (CERCLA) process. Appendix E discusses ES and H considerations for dispositioning facilities by privatization. Appendix F is an overview of the WSS process. Appendix G provides a copy of two DOE Office of Nuclear Safety Policy and Standards memoranda that form the bases for some of the guidance discussed within the Standard. Appendix H gives information on available hazard analysis techniques and references. Appendix I provides a supplemental discussion to Sections 3.3.4, Hazard Baseline Documentation, and 3.3.6, Environmental Permits. Appendix J presents a sample readiness evaluation checklist.

  9. DOE standard: Integration of environment, safety, and health into facility disposition activities. Volume 2: Appendices

    International Nuclear Information System (INIS)

    1998-05-01

    This volume contains the appendices that provide additional environment, safety, and health (ES and H) information to complement Volume 1 of this Standard. Appendix A provides a set of candidate DOE ES and H directives and external regulations, organized by hazard types that may be used to identify potentially applicable directives to a specific facility disposition activity. Appendix B offers examples and lessons learned that illustrate implementation of ES and H approaches discussed in Section 3 of Volume 1. Appendix C contains ISMS performance expectations to guide a project team in developing and implementing an effective ISMS and in developing specific performance criteria for use in facility disposition. Appendix D provides guidance for identifying potential Applicable or Relevant and Appropriate Requirements (ARARs) when decommissioning facilities fall under the Comprehensive Environmental Response, Compensation, Liability Act (CERCLA) process. Appendix E discusses ES and H considerations for dispositioning facilities by privatization. Appendix F is an overview of the WSS process. Appendix G provides a copy of two DOE Office of Nuclear Safety Policy and Standards memoranda that form the bases for some of the guidance discussed within the Standard. Appendix H gives information on available hazard analysis techniques and references. Appendix I provides a supplemental discussion to Sections 3.3.4, Hazard Baseline Documentation, and 3.3.6, Environmental Permits. Appendix J presents a sample readiness evaluation checklist

  10. Occupational Safety and Health Administration

    Science.gov (United States)

    ... Twitter Instagram RSS Subscribe Occupational Safety and Health Administration English | Spanish MENU OSHA English | Spanish Search A ... STATES DEPARTMENT OF LABOR Occupational Safety and Health Administration 200 Constitution Ave., NW, Washington, DC 20210 800- ...

  11. Systems engineered health and safety criteria for safety analysis reports

    International Nuclear Information System (INIS)

    Beitel, G.A.; Morcos, N.

    1993-01-01

    The world of safety analysis is filled with ambiguous words: codes and standards, consequences and risks, hazard and accident, and health and safety. These words have been subject to disparate interpretations by safety analysis report (SAR) writers, readers, and users. open-quotes Principal health and safety criteriaclose quotes has been one of the most frequently misused phrases; rarely is it used consistently or effectively. This paper offers an easily understood definition for open-quotes principal health and safety criteriaclose quotes and uses systems engineering to convert an otherwise mysterious topic into the primary means of producing an integrated SAR. This paper is based on SARs being written for environmental restoration and waste management activities for the U.S. Department of Energy (DOE). Requirements for these SARs are prescribed in DOE Order 5480-23, open-quotes Nuclear Safety Analysis Reports.close quotes

  12. Safety and health annual report 1996

    International Nuclear Information System (INIS)

    1997-01-01

    The 1996 report on the Health and Safety performance of the nuclear fuel cycle company BNFL at its sites in the United Kingdom demonstrates a continuing improvement. The site locations and developments are briefly described and international developments in subsidiary organisations noted. Other sections of the report cover health and safety policy, radiological and industrial safety, emergency planning, incidents, occupational health services, compensation scheme developments, transport, putting radiation in perspective, and safety and health research. Data are provided on: radioactive discharges; industrial safety of BNFL and contractors' employees; radiation dose summaries for BNFL and contractors' employees. There is evidence of the expected plateauing out of doses to BNFL employees at a level less than or similar to background radiation. (UK)

  13. Diabetes Health Information Technology Innovation to Improve Quality of Life for Health Plan Members in Urban Safety Net

    Science.gov (United States)

    Ratanawongsa, Neda; Handley, Margaret A.; Sarkar, Urmimala; Quan, Judy; Pfeifer, Kelly; Soria, Catalina; Schillinger, Dean

    2014-01-01

    Safety net systems need innovative diabetes self-management programs for linguistically diverse patients. A low-income government-sponsored managed care plan implemented a 27-week automated telephone self-management support (ATSM) / health coaching intervention for English, Spanish-, and Cantonese-speaking members from four publicly-funded clinics in a practice-based research network. Compared to waitlist, immediate intervention participants had greater 6-month improvements in overall diabetes self-care behaviors (standardized effect size [ES] 0.29, pimproving patient-reported self-management and may also improve some outcomes. PMID:24594561

  14. Environment, Health, and Safety - Construction Subcontractors Documents |

    Science.gov (United States)

    NREL Environment, Health, and Safety - Construction Subcontractors Documents Environment Environment, Health and Safety (EH&S) requirements are understood by construction subcontractors and with these requirements before submitting proposals and/or environment, health and safety plans for the

  15. Farm Health and Safety

    Science.gov (United States)

    ... the United States. Farms have many health and safety hazards, including Chemicals and pesticides Machinery, tools and ... inspection and maintenance can help prevent accidents. Using safety gloves, goggles and other protective equipment can also ...

  16. National Institute for Occupational Safety and Health

    Science.gov (United States)

    ... Submit Search The CDC The National Institute for Occupational Safety and Health (NIOSH) Note: Javascript is disabled or is not ... and Events NIOSH Contact Information Related Federal Agencies Occupational Safety and Health Administration Mine Safety and Health Administration Follow NIOSH ...

  17. Zagazig Journal of Occupational Health and Safety

    African Journals Online (AJOL)

    Zagazig Journal of Occupational Health and Safety is aimed at physicians and researchers in the wide-ranging discipline of occupational and environmental health and safety. The field is devoted to the diagnosis, prevention, management and scientific analysis of occupational , environmental and safety health problems; ...

  18. 76 FR 71345 - Patient Safety Organizations: Voluntary Relinquishment From Child Health Patient Safety...

    Science.gov (United States)

    2011-11-17

    ... Organizations: Voluntary Relinquishment From Child Health Patient Safety Organization, Inc. AGENCY: Agency for... notification of voluntary relinquishment from Child Health Patient Safety Organization, Inc. of its status as a Patient Safety Organization (PSO). The Patient Safety and Quality Improvement Act of 2005 (Patient Safety...

  19. Occuptional Health and Safety and Employer Motivation

    DEFF Research Database (Denmark)

    Jensen, Per Langå

    2004-01-01

    It is often argued and supported by a number of case studies that investment in human factors and occupational health and safety can pay. But any employer has a number of possible in-vestments, and many of these may have a larger marginal utility than health and safety. In addition it is often...... difficult to calculate the exact pay off for human factors and health and safety – how to calculate higher motivation for instance. The economic benefit as a possible driving force for improvement of occupational health and safety is likely to exist but it must be considered a relatively weak force. Another...... important driving force for improvements in health and safety. No employer likes to be ‘branded’ as immoral, manifested in fines by the labour inspectors or media attention to an unsafe conduct. Strategies to im-prove health and safety therefore need to focus on the legitimacy as the probably strongest...

  20. Occupational Health and Safety and Employer Motivation

    DEFF Research Database (Denmark)

    Hasle, Peter; Jensen, Per Langå

    2004-01-01

    It is often argued and supported by a number of case studies that investment in human factors and occupational health and safety can pay. But any employer has a number of possible in-vestments, and many of these may have a larger marginal utility than health and safety. In addition it is often...... difficult to calculate the exact pay off for human factors and health and safety – how to calculate higher motivation for instance. The economic benefit as a possible driving force for improvement of occupational health and safety is likely to exist but it must be considered a relatively weak force. Another...... important driving force for improvements in health and safety. No employer likes to be ‘branded’ as immoral, manifested in fines by the labour inspectors or media attention to an unsafe conduct. Strategies to im-prove health and safety therefore need to focus on the legitimacy as the probably strongest...

  1. Industrial Student Apprenticeship: Understanding Health and Safety

    Science.gov (United States)

    Simanjuntak, M. V.; Abdullah, A. G.; Puspita, R. H.; Mahdan, D.; Kamaludin, M.

    2018-02-01

    The level of accident in industry is very high caused by lack of knowledge and awareness of workers toward the health and safety. Health and Safety are efforts to create a comfortable and productive atmosphere to accomplish a purpose or goal as maximum risk in the workplace. Vocational Education students must conduct training on business and industry, prior to that they should have a clear understanding on occupational health and safety. The purpose of this research is to analyze the understanding, preparation, and implementation of work health and safety of the students. Method used is descriptive method and data are collected using instrument, observation and interview. The result of study is conclusion of understanding occupational health and safety of vocational education students.

  2. 20 CFR 401.160 - Health or safety.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Health or safety. 401.160 Section 401.160... INFORMATION Disclosure of Official Records and Information § 401.160 Health or safety. The Privacy Act allows us to disclose information in compelling circumstances where an individual's health or safety is...

  3. Plutonium working group report on environmental, safety and health vulnerabilities associated with the Department's plutonium storage. Volume 2, Appendix B, Part 2: Hanford site assessment team report

    International Nuclear Information System (INIS)

    1994-09-01

    The Hanford Site Self Assessment of Plutonium Environmental Safety and Health (ES and H) Vulnerabilities was conducted in accordance with the US Department of Energy (DOE) Secretary's directive of February 1994. The implementation plans to carry out this directive are contained in the Project Plan and the Assessment Plan. For this assessment, vulnerabilities are defined as conditions or weaknesses that may lead to unnecessary or increased radiation exposure of the workers, release of radioactive materials to the environment, or radiation exposure of the public. The purpose for the Assessment is to evaluate environmental, safety and health vulnerabilities from plutonium operations and storage activities. Acts of sabotage or diversion of plutonium which obviously may have ES and H implications are excluded from this study because separate DOE programs evaluate those issues on a continuing basis. Security and safeguards activities which may have negative impacts on safety are included in the evaluation

  4. Occupational Safety and Health Curriculum Manual.

    Science.gov (United States)

    Gourley, Frank A., Jr., Comp.

    With the enactment of the Occupational Safety and Health Act of 1970, the need for manpower development in the field of industrial safety and hygiene has resulted in the development of a broad based program in Occupational Safety and Health. The manual provides information to administrators and instructors on a program of study in this field for…

  5. 77 FR 40622 - Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety...

    Science.gov (United States)

    2012-07-10

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety and Health (MSHRAC, NIOSH..., oxygen supply partnership, safety culture, occupational health and safety management systems, preventing...

  6. The occupational health and safety of flight attendants.

    Science.gov (United States)

    Griffiths, Robin F; Powell, David M C

    2012-05-01

    In order to perform safety-critical roles in emergency situations, flight attendants should meet minimum health standards and not be impaired by factors such as fatigue. In addition, the unique occupational and environmental characteristics of flight attendant employment may have consequential occupational health and safety implications, including radiation exposure, cancer, mental ill-health, musculoskeletal injury, reproductive disorders, and symptoms from cabin air contamination. The respective roles of governments and employers in managing these are controversial. A structured literature review was undertaken to identify key themes for promoting a future agenda for flight attendant health and safety. Recommendations include breast cancer health promotion, implementation of Fatigue Risk Management Systems, standardization of data collection on radiation exposure and health outcomes, and more coordinated approaches to occupational health and safety risk management. Research is ongoing into cabin air contamination incidents, cancer, and fatigue as health and safety concerns. Concerns are raised that statutory medical certification for flight attendants will not benefit either flight safety or occupational health.

  7. Environment, safety and Health Progress Assessment of the Rocky Flats Plant

    International Nuclear Information System (INIS)

    1993-05-01

    This report documents the result of the US Department of Energy's (DOE) Environment, Safety and Health (ES ampersand H) Progress Assessment of the DOE Rocky Flats Plant (RFP) in Golden, Colorado. The assessment, which was conducted during the period of May 17 through May 28, 1993, included a selective review of the ES ampersand H management systems and programs of the responsible DOE Headquarters Program Offices (Defense Programs (DP) and Environmental Restoration and Waste Management (EM)), the DOE Rocky Flats Office (RFO), and the site contractor, EG ampersand G Rocky Flats, Inc. (EG ampersand G). Despite the near constant state of flux under which RFP has been required to operate, the Progress Assessment Team has concluded that significant progress has been made in correcting the deficiencies identified in the 1989 Assessment and in responding responsibly to regulations, and DOE directives and guidance that have been issued since that time. The Team concluded that the improvements have been concentrated in the activities associated with plutonium facilities and in regulatory driven programs. Much remains to be done with respect to implementing on a sitewide basis those management systems that anchor an organization's pursuit of continuous ES ampersand H improvement. Furthermore the Team concluded that the pace of improvement has been constrained by a combination of factors that have limited the site's ability to manage change in the pursuit of sitewide ES ampersand H excellence

  8. Health and safety of the older worker.

    Science.gov (United States)

    Farrow, A; Reynolds, F

    2012-01-01

    In the UK, increasing numbers of paid employees are over 60 years with further increases expected as the state pension age rises. Some concern surrounds possible increased work-related illness and accidents for people working beyond the age of 60. To identify the available evidence for health and safety risks of workers over age 60 years with respect to factors associated with injuries and accidents. Databases searched included PUBMED, OSHUpdate, National Institute for Occupational Safety and Health (NIOSHTIC-2), SafetyLit, the UK The Health and Safety Executive (HSELINE) and the Canadian Centre for Occupational Health and Safety until December 2009. Inclusion criteria were workers aged over 60 years. Findings were grouped into occupational accidents and injuries and individual and workplace factors that may have influenced risk of injury to the over-60s. Very little direct evidence was found concerning safety practices and health risks of workers over age 60. Some safety risks were associated with specific physical declines such as age-related hearing loss. Overall, these workers had fewer accidents and injuries but these were more likely to be serious or fatal when they occurred. There was no strong evidence that work patterns, including shift work or overtime, affected safety. Protective, compensatory strategies or experience may maintain safe working practices. Implications for health and safety risks cannot be assessed without longitudinal research on workforces with substantial numbers of workers over age 60 in order to address the healthy worker effect.

  9. 10 CFR 851.23 - Safety and health standards.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and..., “Marine Terminals.” (6) Title 29 CFR, Part 1918, “Safety and Health Regulations for Longshoring.” (7...

  10. UMTRA Project environmental, health, and safety plan

    International Nuclear Information System (INIS)

    1989-02-01

    The basic health and safety requirements established in this plan are designed to provide guidelines to be applied at all Uranium Mill Tailings Remedial Action (UMTRA) Project sites. Specific restrictions are given where necessary. However, an attempt has been made to provide guidelines which are generic in nature, and will allow for evaluation of site-specific conditions. Health and safety personnel are expected to exercise professional judgment when interpreting these guidelines to ensure the health and safety of project personnel and the general population. This UMTRA Project Environmental, Health, and Safety (EH ampersand S) Plan specifies the basic Federal health and safety standards and special DOE requirements applicable to this program. In addition, responsibilities in carrying out this plan are delineated. Some guidance on program requirements and radiation control and monitoring is also included. An Environmental, Health, and Safety Plan shall be developed as part of the remedial action plan for each mill site and associated disposal site. Special conditions at the site which may present potential health hazards will be described, and special areas that should should be addressed by the Remedial Action Contractor (RAC) will be indicated. Site-specific EH ampersand S concerns will be addressed by special contract conditions in RAC subcontracts. 2 tabs

  11. Health and safety annual report 1992

    International Nuclear Information System (INIS)

    1993-01-01

    BNFL operates 6 sites in the United Kingdom concerned with the nuclear fuel cycle. The annual report on occupational health and safety gives information on all aspects of health and safety within BNFL with special reference to radiation doses received by the workforce and radiation protection measures taken by the company. BNFL's safety policy is set out. Radiation doses to all workers have remained low. Other industrial accidents are also listed and its safety measures for transport, radioactive effluents and in the event of an incident, are mentioned briefly. (UK)

  12. Agricultural Health and Safety

    Science.gov (United States)

    ... that occur while living, working, or visiting agricultural work environments (primarily farms) are considered agricultural injuries, whether or ... of Labor's Occupational Safety & Health Administration (OSHA) supports safe and healthful working conditions by setting and enforcing standards and by ...

  13. Conceptual design report for environmental, safety and health phase III FY-91 line item

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-09-01

    The Mound Facility (Mound), located in Miamisburg, Ohio, is a Department of Energy (DOE) development and production facility performing support work for DOE`s weapons and energy-related programs. EG&G Mound Applied Technologies (EG&G) is the Operating Contractor (OC) for this Government-Owned, Contractor-Operated (GOCO) facility. The work performed at Mound emphasizes nuclear energy and explosives technology. Mound is currently implementing an Environmental, Safety, and Health (ES&H) Program designed to protect its employees, the public, and the environment from adverse effects caused by the facility`s activities. Design has been completed, and construction is in progress for Phase I of this multiphase program. Phase II has been submitted for fiscal year (FY) 89 funding and Phase IV is being submitted as an FY 92 line item. This Conceptual Design Report (CDR) addresses Phase III of the ES&H program.

  14. Plutonium working group report on environmental, safety and health vulnerabilities associated with the Department's plutonium storage. Volume 2, Appendix B, Part 3: Los Alamos National Laboratory site assessment team report

    International Nuclear Information System (INIS)

    1994-09-01

    Environmental safety and health (ES and H) vulnerabilities are defined as conditions or weaknesses that may lead to unnecessary or increased radiation exposure of the workers, release of radioactive materials to the environment, or radiation exposure of the public. In response to the initiative by the Secretary of Energy, Los Alamos National Laboratory (LANL) has performed a self assessment of the ES and H vulnerabilities of plutonium inventories at the laboratory. The objective of this site-specific self assessment is to identify and report ES and H vulnerabilities associated with the storage, handling, and processing of plutonium and maintenance of plutonium-contaminated facilities. This self-assessment of ES and H vulnerabilities and validation by a peer group is not another compliance audit or fault-finding exercise. It has a fact finding mission to develop a database of potential environment, safety, and health vulnerabilities that may lead to unnecessary or increased radiation exposure of the workers, release of radioactive materials to the environment, or radiation exposure of the public

  15. Construction safety program for the National Ignition Facility

    International Nuclear Information System (INIS)

    Cerruti, S.J.

    1997-01-01

    The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF. During this period, all workers are required to implement measures to create a universal awareness which promotes safe practice at the work site, and which will achieve NIF's management objectives in preventing accidents and illnesses. Construction safety for NIF is predicated on everyone performing their jobs in a manner which prevents job-related disabling injuries and illnesses. The CSP outlines the minimum environment, safety, and health (ES ampersand H) standards, LLNL policies and the Construction Industry Institute (CII) Zero Injury Techniques requirements that all workers at the NIF construction site shall adhere to during the construction period of NIF. It identifies the safety requirements which the NIF organizational Elements, construction contractors and construction subcontractors must include in their safety plans for the construction period of NIF, and presents safety protocols and guidelines which workers shall follow to assure a safe and healthful work environment. The CSP also identifies the ES ampersand H responsibilities of LLNL employees, non-LLNL employees, construction contractors, construction subcontractors, and various levels of management within the NIF Program at LLNL. In addition, the CSP contains the responsibilities and functions of ES ampersand H support organizations and administrative groups, and describes their interactions with the NIF Program

  16. Construction safety program for the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Cerruti, S.J.

    1997-01-01

    The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF. During this period, all workers are required to implement measures to create a universal awareness which promotes safe practice at the work site, and which will achieve NIF`s management objectives in preventing accidents and illnesses. Construction safety for NIF is predicated on everyone performing their jobs in a manner which prevents job-related disabling injuries and illnesses. The CSP outlines the minimum environment, safety, and health (ES&H) standards, LLNL policies and the Construction Industry Institute (CII) Zero Injury Techniques requirements that all workers at the NIF construction site shall adhere to during the construction period of NIF. It identifies the safety requirements which the NIF organizational Elements, construction contractors and construction subcontractors must include in their safety plans for the construction period of NIF, and presents safety protocols and guidelines which workers shall follow to assure a safe and healthful work environment. The CSP also identifies the ES&H responsibilities of LLNL employees, non-LLNL employees, construction contractors, construction subcontractors, and various levels of management within the NIF Program at LLNL. In addition, the CSP contains the responsibilities and functions of ES&H support organizations and administrative groups, and describes their interactions with the NIF Program.

  17. Advancing perinatal patient safety through application of safety science principles using health IT.

    Science.gov (United States)

    Webb, Jennifer; Sorensen, Asta; Sommerness, Samantha; Lasater, Beth; Mistry, Kamila; Kahwati, Leila

    2017-12-19

    The use of health information technology (IT) has been shown to promote patient safety in Labor and Delivery (L&D) units. The use of health IT to apply safety science principles (e.g., standardization) to L&D unit processes may further advance perinatal safety. Semi-structured interviews were conducted with L&D units participating in the Agency for Healthcare Research and Quality's (AHRQ's) Safety Program for Perinatal Care (SPPC) to assess units' experience with program implementation. Analysis of interview transcripts was used to characterize the process and experience of using health IT for applying safety science principles to L&D unit processes. Forty-six L&D units from 10 states completed participation in SPPC program implementation; thirty-two (70%) reported the use of health IT as an enabling strategy for their local implementation. Health IT was used to improve standardization of processes, use of independent checks, and to facilitate learning from defects. L&D units standardized care processes through use of electronic health record (EHR)-based order sets and use of smart pumps and other technology to improve medication safety. Units also standardized EHR documentation, particularly related to electronic fetal monitoring (EFM) and shoulder dystocia. Cognitive aids and tools were integrated into EHR and care workflows to create independent checks such as checklists, risk assessments, and communication handoff tools. Units also used data from EHRs to monitor processes of care to learn from defects. Units experienced several challenges incorporating health IT, including obtaining organization approval, working with their busy IT departments, and retrieving standardized data from health IT systems. Use of health IT played an integral part in the planning and implementation of SPPC for participating L&D units. Use of health IT is an encouraging approach for incorporating safety science principles into care to improve perinatal safety and should be incorporated

  18. Anthropology in Agricultural Health and Safety Research and Intervention.

    Science.gov (United States)

    Arcury, Thomas

    2017-01-01

    Agriculture remains a dangerous industry, even as agricultural science and technology continue to advance. Research that goes beyond technological changes to address safety culture and policy are needed to improve health and safety in agriculture. In this commentary, I consider the potential for anthropology to contribute to agricultural health and safety research by addressing three aims: (1) I briefly consider what the articles in this issue of the Journal of Agromedicine say about anthropologists in agricultural health and safety; (2) I discuss what anthropologists can add to agricultural health and safety research; and (3) I examine ways in which anthropologists can participate in agricultural health and safety research. In using their traditions of rigorous field research to understand how those working in agriculture perceive and interpret factors affecting occupational health and safety (their "emic" perspective), and translating this perspective to improve the understanding of occupational health professionals and policy makers (an "etic" perspective), anthropologists can expose myths that limit improvements in agricultural health and safety. Addressing significant questions, working with the most vulnerable agricultural communities, and being outside establishment agriculture provide anthropologists with the opportunity to improve health and safety policy and regulation in agriculture.

  19. [Transfer of the AGnES concept to the regular German health-care system: legal evaluation, reimbursement, qualification].

    Science.gov (United States)

    van den Berg, N; Kleinke, S; Heymann, R; Oppermann, R F; Jakobi, B; Hoffmann, W

    2010-05-01

    According to an amendment of German social security legislation, the AGnES concept of delegation of certain tasks of medical care, especially house calls, by general practitioners (GPs) to qualified practice employees (AGnES employees), will be transferred into the regular German health care system from January 2009 onward. The concept was developed to support GPs in regions with imminent gaps in primary care. Patient data, the specifically delegated and all other activities carried out by the AGnES employees in the AGnES projects were digitally documented. Additionally, the participating GPs, AGnES employees and patients underwent a set of standardised interviews. A curriculum to qualify the AGnES employees and to define the requirements needed was developed. A legal assessment of all delegated activities was carried out, and an economical model to calculate the necessary allowance was calculated. In seven model projects in four federal states in Germany, 11,228 house calls were carried out involving 1,424, mostly multimorbid, patients (mean age: 78.6 years). A modular structured curriculum, considering the basic education and acquired competences, was developed. It allows for an individual qualification of the AGnES employees. The result of the legal assessment was the central relevance of the qualification of the practice employees according to the AGnES curriculum as the essential condition for carrying out the entire range of activities of the AGnES concept. The economic model revealed euro 21.58 for a house call by an AGnES employee. The underlying model referred to underserved regions. A successful transfer of the AGnES concept with a high standard of quality into regular health-care depends on several factors. Of particular importance is the specific qualification of the practice employees, which is a central legal condition for the delegation of medical tasks from GPs to AGnEs employees. A second determining factor is also an adequate reimbursement within

  20. Travelers' Health: Injuries and Safety

    Science.gov (United States)

    ... Safety Road Safety - 8 Steps MERS Health Advisory poster MERS Pictogram CDC Guide for Healthy Travel Website ... possible, fly on larger planes (>30 seats), in good weather, during the daylight hours, and with experienced ...

  1. 77 FR 11120 - Patient Safety Organizations: Voluntary Relinquishment From UAB Health System Patient Safety...

    Science.gov (United States)

    2012-02-24

    ... Organizations: Voluntary Relinquishment From UAB Health System Patient Safety Organization AGENCY: Agency for... notification of voluntary relinquishment from the UAB Health System Patient Safety Organization of its status as a Patient Safety Organization (PSO). The Patient Safety and Quality Improvement Act of 2005...

  2. Center for Maritime Safety and Health Studies

    Data.gov (United States)

    Federal Laboratory Consortium — Established in November 2015, the Center for Maritime Safety and Health Studies (CMSHS) promotes safety and health for all maritime workers, including those employed...

  3. 77 FR 27776 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

    Science.gov (United States)

    2012-05-11

    ... Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH) In... Services Office, CDC, pursuant to Public Law 92-463. Purpose: The Safety and Occupational Health Study... standard grants review and funding cycles pertaining to research issues in occupational safety and health...

  4. 76 FR 18220 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

    Science.gov (United States)

    2011-04-01

    ... Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH) In... Services Office, CDC, pursuant to Public Law 92-463. Purpose: The Safety and Occupational Health Study... standard grants review and funding cycles pertaining to research issues in occupational safety and health...

  5. 78 FR 40743 - Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety...

    Science.gov (United States)

    2013-07-08

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety and Health (MSHRAC, NIOSH... Director, NIOSH, on priorities in mine safety and health research, including grants and contracts for such...

  6. Child Safety: MedlinePlus Health Topic

    Science.gov (United States)

    ... injuries in children (Medical Encyclopedia) Also in Spanish Topic Image MedlinePlus Email Updates Get Child Safety updates ... safety Preventing head injuries in children Related Health Topics Infant and Newborn Care Internet Safety Motor Vehicle ...

  7. 29 CFR 1925.2 - Safety and health standards.

    Science.gov (United States)

    2010-07-01

    .... Every contractor and subcontractor shall comply with the safety and health standards published in 41 CFR... 29 Labor 7 2010-07-01 2010-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR...

  8. 32 CFR 989.27 - Occupational safety and health.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Occupational safety and health. 989.27 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.27 Occupational safety and health. Assess direct and indirect impacts of proposed actions on the safety and health of Air Force employees and...

  9. 75 FR 12554 - Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety...

    Science.gov (United States)

    2010-03-16

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety and Health (MSHRAC, NIOSH... priorities in mine safety and health research, including grants and contracts for such research, 30 U.S.C...

  10. 75 FR 26266 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

    Science.gov (United States)

    2010-05-11

    ... Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH) In...) Public Law 92-463. Purpose: The Safety and Occupational Health Study Section will review, discuss, and... cycles pertaining to research issues in occupational safety and health, and allied areas. It is the...

  11. Environmental, health, and safety by design

    International Nuclear Information System (INIS)

    Soklow, R.G.

    1999-01-01

    Solar Turbines Incorporated created a self-directed work team, the Safety and Environmental Awareness (SEA) Team that initiated a company wide effort to raise employee awareness to promote integrating responsible environmental, health, and safety practices into product design, manufacturing, and services. Environmental, health, and safety issues influence how all businesses operate around the world. Companies choose to operate in an environmentally responsible manner because it not only benefits employees and the communities where they live, it also benefits the business when superior performance results in a competitive advantage. Solar surveyed gas turbines users to identify their top environmental and safety concerns and issues. The authors asked about various environmental and safety aspects of their equipment. Results from the survey has helped engineering and design focus efforts so that future products and product improvements assist customers in meeting their regulatory obligations and social responsibilities. Air pollution has historically been one of the most important environmental issues facing customers, because pollutant emissions greatly influence equipment choices and operation flexibility. There are other environmental, health and safety issues: sustainable fire suppression choices, start systems, hazardous materials use and ability to recycle materials, package accessibility, noise and product take back issues

  12. Permanent Commission for Health and Safety

    CERN Multimedia

    Association du personnel

    2007-01-01

    The mandate of the Staff Association's permanent commission for Health and Safety is to examine all aspects of health and safety related to the working environment at CERN. In no way does it wish to be a substitute for the official bodies that are responsible for these matters. The Commission's aim is to formulate remarks on and make proposals about these questions to the relevant bodies and the CERN Management. Its main focus is the safety of the CERN staff but it is also concerned with the safety of the installations and of the CERN environment. The Commission reports to the Staff Council and the Executive Committee of the Staff Association.

  13. Coal Mine Health and Safety Regulation 2006 under the Coal Mine Health and Safety Act 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-12-22

    The aim of the Act is to secure the health, safety and welfare of people in connection with coal operations (which include all places of work where coal is mined and certain other places). The Regulation contains provisions about the following matters: (a) places of work to which the Act does not apply, (b) duties relating to health, welfare and safety at coal operations, including the following: (i) the nomination of the operator of a coal operation and the provision of health and safety information for incoming operators, (ii) the contents of health and safety management systems for coal operations, (iii) major hazards and the contents of major hazard management plans for coal operations, (iv) duties relating to contractors, (v) the contents of management structures and emergency management systems for coal operations, escape and rescue plans and fire fighting plans and high risk activities, (c) notifications, including (i) notification of incidents, (ii) inquiries, (iii) notification of other matters to the Chief Inspector), (d) aspects of safety at coal operations, including the following: (i) controlled materials, plants and practices, (ii) coal dust explosion prevention and suppression, (iii) ventilation at coal operations, (iv) escape from coal operations, (v) the operation of transport at coal operations, (vi) surveys and certified plans, (vii) employment at coal operations, (e) the licensing of certain activities, (f) competence standards, (g) the Coal Competence Board, (h) check inspectors, (i) exemptions from provisions of this Regulation, (j) the following miscellaneous matters concerning coal mine health and safety: (i) the keeping of records and reporting, (ii) penalties, the review of decisions by the Administrative Decisions Tribunal, fees and charges, consultation, information and other miscellaneous matters, (k) savings and transitional provisions.

  14. Environment, health and safety guiding principles

    International Nuclear Information System (INIS)

    1997-06-01

    The Canadian Energy Pipeline Association (CEPA) has taken a leadership role in promoting responsible planning, management and work practices that meet the pipeline industry's environment, health and safety objectives. This brochure contains CEPA's environment, health and safety statement. It lists the guiding principles developed and endorsed by CEPA and its member companies in support of protecting the environment and the health and safety of its employees and the public. The 11 CEPA member companies are: Alberta Natural Gas Company Ltd., ATCO Gas Services Ltd., Foothills Pipe Lines Ltd., Interprovincial Pipe Line Inc., NOVA Gas Transmission Limited, TransGas Limited, Trans Mountain Pipe Line Company Ltd., Trans-Northern Pipelines Inc., Trans Quebec and Maritimes Pipeline Inc., and Westcoast Energy Inc

  15. Stepping Up Occupational Safety and Health Through Employee Participation.

    Science.gov (United States)

    Vaughan, Gary R.

    1986-01-01

    The effectiveness of the Occupational Safety and Health Act of 1970 is examined, and it is suggested that employee participation could help improve occupational safety and health in the future, through safety committees, safety circles, safety teams, and individual participation. (MSE)

  16. Health and Safety Audit Design Manual

    Energy Technology Data Exchange (ETDEWEB)

    Ternes, Mark P. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Langley, Brandon R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Accawi, Gina K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Malhotra, Mini [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-10-01

    The Health and Safety Audit is an electronic audit tool developed by the Oak Ridge National Laboratory to assist in the identification and selection of health and safety measures when a home is being weatherized (i.e., receiving home energy upgrades), especially as part of the US Department of Energy (DOE) Weatherization Assistance Program, or during home energy-efficiency retrofit or remodeling jobs. The audit is specifically applicable to existing single-family homes (including mobile homes), and is generally applicable to individual dwelling units in low-rise multifamily buildings. The health and safety issues covered in the audit are grouped in nine categories: mold and moisture, lead, radon, asbestos, formaldehyde and volatile organic compounds (VOCs), combustion, pest infestation, safety, and ventilation. Development of the audit was supported by the US Department of Housing and Urban Development Office of Healthy Homes and Lead Hazard Control and the DOE Weatherization Assistance Program.

  17. Health and Safety First

    CERN Document Server

    2013-01-01

    At CERN, health and safety underpin everything we do. We have strict operational procedures in place, as well as health, safety and environment (HSE) requirements to make our working environment as safe as possible. It’s everyone’s responsibility to follow these procedures and requirements to keep ourselves, and our colleagues, safe. We have a very good safety and operational record at CERN stretching back almost 60 years, but there is never room for complacency.   With this very much in mind, we have developed a robust plan for implementation if something unforeseen goes wrong.  Because however careful we all are, accidents do happen, and the mark of any organisation that aspires to be among the best in the world is how quickly and efficiently it acts when they do. A small team made up of people from several departments at CERN has produced a strategic crisis management plan that we can put into action should a major incident occur.  This plan focuses on...

  18. Health, Safety, and Environment Division annual report, 1988

    International Nuclear Information System (INIS)

    Rosenthal, M.A.

    1989-10-01

    The primary responsibility of the Health, Safety, and Environment (HSE) Division at the Los Alamos National Laboratory is to provide comprehensive occupational health and safety programs, waste processing, and environmental protection. These activities are designed to protect the worker, the public, and the environment. Many disciplines are required to meet the responsibilities, including radiation protection, industrial hygiene, safety, occupational medicine, environmental science, epidemiology, and waste management. New and challenging health and safety problems occasionally arise from the diverse research and development work of the Laboratory. Research programs in HSE Division often stem from these applied needs. These programs continue but are also extended, as needed, to study specific problems for the Department of Energy and to help develop better occupational health and safety practices. 52 refs

  19. Tank farm health and safety plan. Revision 2

    International Nuclear Information System (INIS)

    Mickle, G.D.

    1995-01-01

    This Tank Farm Health and Safety Plan (HASP) for the conduct of all operations and work activities at the Hanford Site 200 Area Tank Farms is provided in order to minimize health and safety risks to workers and other onsite personnel. The HASP accomplishes this objective by establishing requirements, providing general guidelines, and conveying farm and facility-specific hazard communication information. The HASP, in conjunction with the job-specific information required by the HASP, is provided also as a reference for use during the planning of work activities at the tank farms. This HASP applies to Westinghouse Hanford Company (WHC), other prime contractors to the U.S. Department of Energy (DOE), and subcontractors to WHC who may be involved in tank farm work activities. This plan is intended to be both a requirements document and a useful reference to aid tank farm workers in understanding the safety and health issues that are encountered in routine and nonroutine work activities. The HASP defines the health and safety responsibilities of personnel working at the tank farms. It has been prepared in recognition of and is consistent with National Institute of Safety and Health (NIOSH), and Occupational Safety and Health Administration (OSHA)/Unlimited State Coast Guard (USCG)/U.S. Environmental Protection Agency (EPA), Occupational Safety and Health Guidance Manual for Hazardous Waste Site Activities (NIOSH 1985); WHC-CM-4-3, Industrial Safety Manual, Volume 4, open-quotes Health and Safety Programs for Hazardous Waste Operations;close quotes 29 CFR 1910.120, Hazardous Waste Operations and Emergency Response; WHC-CM-1-1, Management Policies; and WHC-CM-1-3, Management Requirements and Procedures. When differences in governing regulations or policies exist, the more stringent requirements shall apply until the discrepancy can be resolved

  20. Tank farm health and safety plan. Revision 2

    Energy Technology Data Exchange (ETDEWEB)

    Mickle, G.D.

    1995-03-29

    This Tank Farm Health and Safety Plan (HASP) for the conduct of all operations and work activities at the Hanford Site 200 Area Tank Farms is provided in order to minimize health and safety risks to workers and other onsite personnel. The HASP accomplishes this objective by establishing requirements, providing general guidelines, and conveying farm and facility-specific hazard communication information. The HASP, in conjunction with the job-specific information required by the HASP, is provided also as a reference for use during the planning of work activities at the tank farms. This HASP applies to Westinghouse Hanford Company (WHC), other prime contractors to the U.S. Department of Energy (DOE), and subcontractors to WHC who may be involved in tank farm work activities. This plan is intended to be both a requirements document and a useful reference to aid tank farm workers in understanding the safety and health issues that are encountered in routine and nonroutine work activities. The HASP defines the health and safety responsibilities of personnel working at the tank farms. It has been prepared in recognition of and is consistent with National Institute of Safety and Health (NIOSH), and Occupational Safety and Health Administration (OSHA)/Unlimited State Coast Guard (USCG)/U.S. Environmental Protection Agency (EPA), Occupational Safety and Health Guidance Manual for Hazardous Waste Site Activities (NIOSH 1985); WHC-CM-4-3, Industrial Safety Manual, Volume 4, {open_quotes}Health and Safety Programs for Hazardous Waste Operations;{close_quotes} 29 CFR 1910.120, Hazardous Waste Operations and Emergency Response; WHC-CM-1-1, Management Policies; and WHC-CM-1-3, Management Requirements and Procedures. When differences in governing regulations or policies exist, the more stringent requirements shall apply until the discrepancy can be resolved.

  1. National Ignition Facility Project Site Safety Program

    International Nuclear Information System (INIS)

    Dun, C

    2003-01-01

    This Safety Program for the National Ignition Facility (NIF) presents safety protocols and requirements that management and workers shall follow to assure a safe and healthful work environment during activities performed on the NIF Project site. The NIF Project Site Safety Program (NPSSP) requires that activities at the NIF Project site be performed in accordance with the ''LLNL ES and H Manual'' and the augmented set of controls and processes described in this NIF Project Site Safety Program. Specifically, this document: (1) Defines the fundamental NIF site safety philosophy. (2) Defines the areas covered by this safety program (see Appendix B). (3) Identifies management roles and responsibilities. (4) Defines core safety management processes. (5) Identifies NIF site-specific safety requirements. This NPSSP sets forth the responsibilities, requirements, rules, policies, and regulations for workers involved in work activities performed on the NIF Project site. Workers are required to implement measures to create a universal awareness that promotes safe practice at the work site and will achieve NIF management objectives in preventing accidents and illnesses. ES and H requirements are consistent with the ''LLNL ES and H Manual''. This NPSSP and implementing procedures (e.g., Management Walkabout, special work procedures, etc.,) are a comprehensive safety program that applies to NIF workers on the NIF Project site. The NIF Project site includes the B581/B681 site and support areas shown in Appendix B

  2. Plutonium working group report on environmental, safety and health vulnerabilities associated with the Department's plutonium storage. Volume II, part 2: Hanford working group assessment team report

    International Nuclear Information System (INIS)

    1994-09-01

    In a memorandum dated January 24, 1994, the Secretary of Energy initiated a department-wide assessment of current plutonium-related safety and environmental vulnerabilities at Department of Energy (DOE) nuclear facilities. In a March 15, 1994 memorandum, the Secretary directed the Office of Environment, Safety and Health (ES ampersand H) to take the lead in coordinating this assessment, which will help to establish the plutonium portion of the foundation for decision making related to the ES ampersand H aspects of national surplus fissile material disposition efforts. This DOE-wide plutonium vulnerability assessment is intended to provide the information base needed to identify and prioritize interim corrective actions for the safe management of these materials

  3. Oswer integrated health and safety standard operating practices. Directive

    International Nuclear Information System (INIS)

    1993-02-01

    The directive implements the OSWER (Office of Solid Waste and Emergency Response) Integrated Health and Safety Standards Operating Practices in conjunction with the OSHA (Occupational Safety and Health Act) Worker Protection Standards, replacing the OSWER Integrated Health and Safety Policy

  4. Recent Cases: Administrative Law--Occupational Safety and Health Act

    Science.gov (United States)

    Harvard Law Review, 1976

    1976-01-01

    Implications of the Occupational Safety and Health Act of 1970 are described in two cases: Brennan v. Occupational Safety and Health Review Commission (Underhill Construction Corp.), and Anning-Johnson Co. v. United States Occupational Safety and Health Review Commission. (LBH)

  5. Improving safety culture through the health and safety organization: a case study.

    Science.gov (United States)

    Nielsen, Kent J

    2014-02-01

    International research indicates that internal health and safety organizations (HSO) and health and safety committees (HSC) do not have the intended impact on companies' safety performance. The aim of this case study at an industrial plant was to test whether the HSO can improve company safety culture by creating more and better safety-related interactions both within the HSO and between HSO members and the shop-floor. A quasi-experimental single case study design based on action research with both quantitative and qualitative measures was used. Based on baseline mapping of safety culture and the efficiency of the HSO three developmental processes were started aimed at the HSC, the whole HSO, and the safety representatives, respectively. Results at follow-up indicated a marked improvement in HSO performance, interaction patterns concerning safety, safety culture indicators, and a changed trend in injury rates. These improvements are interpreted as cultural change because an organizational double-loop learning process leading to modification of the basic assumptions could be identified. The study provides evidence that the HSO can improve company safety culture by focusing on safety-related interactions. © 2013. Published by Elsevier Ltd and National Safety Council.

  6. Steel Erection Safety. Module SH-39. Safety and Health.

    Science.gov (United States)

    Center for Occupational Research and Development, Inc., Waco, TX.

    This student module on steel erection safety is one of 50 modules concerned with job safety and health. This module identifies typical jobsite hazards encountered by steel erectors, as well as providing safe job procedures for general and specific construction activities. Following the introduction, 11 objectives (each keyed to a page in the text)…

  7. 78 FR 54923 - Federal Advisory Council on Occupational Safety and Health

    Science.gov (United States)

    2013-09-06

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2013-0013] Federal Advisory Council on Occupational Safety and Health AGENCY: Occupational Safety and Health... Occupational Safety and Health (FACOSH). SUMMARY: The Assistant Secretary of Labor for Occupational Safety and...

  8. Building trust and confidence in laboratory ES and H policy and practices

    Energy Technology Data Exchange (ETDEWEB)

    Graf, J.

    2000-08-01

    This report describes a successful pilot event among LANL employees that can see as a model for employee involvement and community input. The conference was designed to begin building trust and confidence in Laboratory policy and practices in the area of Environment, Safety, and Health (ES and H). It represents a concrete step toward fostering better relationships among Lab employees and creating a new, innovative approach to communication that can also be used to build trust in the larger community. Based on the proven methods of the National Issues Forums and the Jefferson Center Citizen Jury Process, this conference enabled management to learn more about the thoughts and advice of LANL employees, During the course of the day, a random sample of Lab employees representing the LANL workforce learned about issues of health, safety and the environment, and some of the options available to increase trustworthiness in these areas. These Employee Advisors then discussed the options at some length and presented recommendations to senior Lab managers in the role of Decision Makers. At the end of the day, the participants offered their reflections and discussed what they learned during the conference, and Decision Makers responded to what they heard. The most common view expressed by the Employee Advisors was that a bottom-up approach was necessary to develop more relevant ES and H policies. They were unanimous in their desire for more employee inclusion into the decision making process. All Employee Advisors were in support of a Lab wide survey to determine employee concerns about ES and H issues. After listening to the deliberation, the Decision Makers responded with several commitments. The most significant was the pledge to meet with Employee Advisors by the end of February to discuss the status of their recommendations on ES and H policy and practices. The ensuing follow-up meeting explored employee concerns in greater depth resulting in forward-looking action steps

  9. Health and Safety annual report 1993

    International Nuclear Information System (INIS)

    1994-01-01

    In the 1993 Health and Safety Report for BNFL, data showing improvements in radiological and conventional safety are given. Other aspects discussed are emergency planning, the level of incidents, occupational health services, litigation and the compensation scheme, the transport of radioactive materials, research covering transgenerational epidemiology, mortality and cancer studies, genetics and radiobiology, and dosimetry, and finally a summary of radioactive discharges and environmental data. (UK)

  10. Safety and Health in Nuclear Malaysia workplace

    International Nuclear Information System (INIS)

    Wo, Y.M.

    2013-01-01

    Safety and health at work place is essential to ensure the health of their workers as required under the Occupational Safety and Health Act 1994 (Act 514). In Malaysian Nuclear Agency, each building / block was appointed with one/ two supervisors, known as Area Supervisor to ensure the safety of buildings / blocks. The area supervisor will conduct periodic bimonthly inspections of the building / block under their supervision. This paper presents the results of the inspection of 80 supervisors over 45 buildings / blocks at the Malaysian Nuclear Agency for the first six months of the year 2013. (author)

  11. Occupational Safety and Health in Peru.

    Science.gov (United States)

    Cruz, Ismael; Huerta-Mercado, Raul

    2015-01-01

    Peru is a country located on the Pacific coast of South America with a population of more than 30 million inhabitants. In the past 10 years, Peru has had a steady economic growth. Peru is predominantly an extractive industry country, but the manufacturing and construction sectors are booming. It is in this context that regulations have been implemented to protect the safety and health of workers. One of the most important regulations is the Law on Safety and Health at Work, which has been recently promulgated. Regulations are complemented by training and education in occupational safety and health. The measures are yet to be fully implemented thus a positive effect in reducing accidents and occupational diseases at work has not yet been seen. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

  12. 75 FR 44967 - National Institute for Occupational Safety and Health

    Science.gov (United States)

    2010-07-30

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institute for Occupational Safety and Health... Occupational Safety and Health (NIOSH), Department of Health and Human Services (HHS). ACTION: Notice. SUMMARY... Occupational Safety and Health (NIOSH), 4676 Columbia Parkway, MS C-46, Cincinnati, OH 45226, Telephone 877-222...

  13. Electrical safety in health care area

    International Nuclear Information System (INIS)

    Amer, G.M.

    2011-01-01

    An electrical safety in health care area is necessary to protect patients and staff from potential electrical hazards.Functional, accurate and safe clinical equipment is an essential requirement in the provision of health services. Well-maintained equipment will give clinicians greater confidence in the reliability of its performance and contribute to a high standard of client care. Clinical equipment, like all health services, requires annual or periodic servicing of medical equipment. In addition to planned servicing and preventative maintenance, there may be the unexpected failure of medical (and other) equipment, necessitating repair. In general, clinical equipment that has an electrical power source and has direct contact with the client must be serviced as a first priority. In this presentation, a review of the main concepts related to the electrical safety in health area,theinternational standard, the distribution of electric power in hospital and protection against shockwill be introduced. Protection system in hospital will be presented in its two ways: inpower distribution in hospitaland inbiomedical equipment design,finally the optimum maintenance technology and safety tests in health care areawill presented also.

  14. Plutonium working group report on environmental, safety and health vulnerabilities associated with the Department's plutonium storage. Volume II, part 1: Rocky Flats working group assessment team report

    International Nuclear Information System (INIS)

    1994-09-01

    The objective of the Plutonium Environment, Safety, and Health (ES ampersand H) Vulnerability Assessment Project was to conduct a comprehensive assessment of the ES ampersand H vulnerabilities arising from the Department of Energy (DOE) storage and handling of its current plutonium holdings. The purpose of this assessment was to identify and prioritize ES ampersand H vulnerabilities that could lead to unnecessary or increased radiation exposure of workers, release of radioactive materials to the environment, or radiation exposure of the public. The results will serve as an information base for identifying interim corrective actions and options for the safe management of fissile materials

  15. One health and food safety

    DEFF Research Database (Denmark)

    Wielinga, Peter; Schlundt, Jørgen

    2014-01-01

    Many, if not most, of all important zoonoses relate in some way to animals in the food production chain. Therefore food becomes an important vehicle for many zoonotic pathogens. One of the major issues in food safety over the latest decades has been the lack of cross-sectoral collaboration across...... the food production chain. Major food safety events have been significantly affected by the lack of collaboration between the animal health, the food control, and the human health sector. One Health formulates clearly both the need for, and the benefit of cross-sectoral collaboration. Here we will focus...... on the human health risk related to zoonotic microorganisms present both in food animals and food derived from these animals, and typically transmitted to humans through food. Some diseases have global epidemic- or pandemic-potential, resulting in dramatic action from international organizations and national...

  16. Environment, Safety & Health at SLAC

    Science.gov (United States)

    and safety of our staff, the community, and the environment as we carry out our scientific mission. We integral to each job. As stewards of our land, SLAC also seeks to minimize pollution to our environment and to protect our resources and biota. See the SLAC Environment, Safety and Health Policy for more

  17. Occupational health and safety: Designing and building with MACBETH a value risk-matrix for evaluating health and safety risks

    Science.gov (United States)

    Lopes, D. F.; Oliveira, M. D.; Costa, C. A. Bana e.

    2015-05-01

    Risk matrices (RMs) are commonly used to evaluate health and safety risks. Nonetheless, they violate some theoretical principles that compromise their feasibility and use. This study describes how multiple criteria decision analysis methods have been used to improve the design and the deployment of RMs to evaluate health and safety risks at the Occupational Health and Safety Unit (OHSU) of the Regional Health Administration of Lisbon and Tagus Valley. ‘Value risk-matrices’ (VRMs) are built with the MACBETH approach in four modelling steps: a) structuring risk impacts, involving the construction of descriptors of impact that link risk events with health impacts and are informed by scientific evidence; b) generating a value measurement scale of risk impacts, by applying the MACBETH-Choquet procedure; c) building a system for eliciting subjective probabilities that makes use of a numerical probability scale that was constructed with MACBETH qualitative judgments on likelihood; d) and defining a classification colouring scheme for the VRM. A VRM built with OHSU members was implemented in a decision support system which will be used by OHSU members to evaluate health and safety risks and to identify risk mitigation actions.

  18. Measuring Best Practices for Workplace Safety, Health, and Well-Being: The Workplace Integrated Safety and Health Assessment.

    Science.gov (United States)

    Sorensen, Glorian; Sparer, Emily; Williams, Jessica A R; Gundersen, Daniel; Boden, Leslie I; Dennerlein, Jack T; Hashimoto, Dean; Katz, Jeffrey N; McLellan, Deborah L; Okechukwu, Cassandra A; Pronk, Nicolaas P; Revette, Anna; Wagner, Gregory R

    2018-05-01

    To present a measure of effective workplace organizational policies, programs, and practices that focuses on working conditions and organizational facilitators of worker safety, health and well-being: the workplace integrated safety and health (WISH) assessment. Development of this assessment used an iterative process involving a modified Delphi method, extensive literature reviews, and systematic cognitive testing. The assessment measures six core constructs identified as central to best practices for protecting and promoting worker safety, health and well-being: leadership commitment; participation; policies, programs, and practices that foster supportive working conditions; comprehensive and collaborative strategies; adherence to federal and state regulations and ethical norms; and data-driven change. The WISH Assessment holds promise as a tool that may inform organizational priority setting and guide research around causal pathways influencing implementation and outcomes related to these approaches.

  19. Does Employee Safety Matter for Patients Too? Employee Safety Climate and Patient Safety Culture in Health Care.

    Science.gov (United States)

    Mohr, David C; Eaton, Jennifer Lipkowitz; McPhaul, Kathleen M; Hodgson, Michael J

    2015-04-22

    We examined relationships between employee safety climate and patient safety culture. Because employee safety may be a precondition for the development of patient safety, we hypothesized that employee safety culture would be strongly and positively related to patient safety culture. An employee safety climate survey was administered in 2010 and assessed employees' views and experiences of safety for employees. The patient safety survey administered in 2011 assessed the safety culture for patients. We performed Pearson correlations and multiple regression analysis to examine the relationships between a composite measure of employee safety with subdimensions of patient safety culture. The regression models controlled for size, geographic characteristics, and teaching affiliation. Analyses were conducted at the group level using data from 132 medical centers. Higher employee safety climate composite scores were positively associated with all 9 patient safety culture measures examined. Standardized multivariate regression coefficients ranged from 0.44 to 0.64. Medical facilities where staff have more positive perceptions of health care workplace safety climate tended to have more positive assessments of patient safety culture. This suggests that patient safety culture and employee safety climate could be mutually reinforcing, such that investments and improvements in one domain positively impacts the other. Further research is needed to better understand the nexus between health care employee and patient safety to generalize and act upon findings.

  20. Health and safety annual report 1988

    International Nuclear Information System (INIS)

    1989-01-01

    This report on health and safety provides a review of the impact of the Comapny's activities on its workforce, the public and the environment. New sections include safety auditing, emergency planning and health and safety research. BNFL operates five sites in north west England and southern Scotland. The head office and Engineering Design Centre is at Risley, near Warrington. Fuel is manufactured at Springfields near Preston, uranium is enriched for modern nuclear power stations at Capenhurst near Chester and spent fuel is reprocessed at Sellafield. BNFL also operate Calder Hall (Sellafield) and Chapelcross (Scotland) power stations and a disposal site for low-level radioactive wastes at Drigg near Sellafield. Radiation sources and BNFL's radioactive discharge are first explained generally and then specifically for each BNFL site. Industrial and radiological safety within BNFL are described. (UK)

  1. Plutonium working group report on environmental, safety and health vulnerabilities associated with the Department's plutonium storage. Volume 2, Appendix B, Part 4: Savannah River Site site assessment team report

    International Nuclear Information System (INIS)

    1994-09-01

    The Plutonium Environmental, Safety, and Health (ES and H) Vulnerability Assessment is being conducted by the DOE Office of Environment, Safety, and Health (DOE-EH) to evaluate the ES and H vulnerabilities arising from the Department's storage and handling of its holdings of plutonium and other transuranic isotopes. This report on Savannah River Site (SRS) facilities and materials provides the results of a self-assessment for the purpose of identifying issues as potential vulnerabilities. The report provides data and analyses for the DOE-EH and independent Working Group Assessment Team, which will make the final determination as to ES and H vulnerabilities at SRS. The term ES and H vulnerabilities is defined for the purpose of this assessment to mean conditions that could lead to unnecessary or increased radiation exposure of workers, release of radioactive materials to the environment, or radiation exposure of the public. The self-assessment identifies and prioritizes candidate or potential vulnerabilities and issues for consideration by the Working Group Assessment Team, and will serve as an information base for identifying interim corrective actions and options for the safe management of fissile materials. It will also establish a foundation for decision making regarding the safe management and disposition of DOE plutonium

  2. Stennis Space Center observes 2009 Safety and Health Day

    Science.gov (United States)

    2009-01-01

    Sue Smith, a medical clinic employee at NASA's John C. Stennis Space Center, takes the temperature of colleague Karen Badon during 2009 Safety and Health Day activities Oct. 22. Safety Day activities included speakers, informational sessions and a number of displays on safety and health issues. Astronaut Dominic Gorie also visited the south Mississippi rocket engine testing facility during the day to address employees and present several Silver Snoopy awards for outstanding contributions to flight safety and mission success. The activities were part of an ongoing safety and health emphasis at Stennis.

  3. Occupational Safety and Health Programs in Career Education.

    Science.gov (United States)

    DiCarlo, Robert D.; And Others

    This resource guide was developed in response to the Occupational Safety and Health Act of 1970 and is intended to assist teachers in implementing courses in occupational safety and health as part of a career education program. The material is a synthesis of films, programed instruction, slides and narration, case studies, safety pamphlets,…

  4. The impact of health information technology on patient safety

    Directory of Open Access Journals (Sweden)

    Yasser K. Alotaibi

    2017-12-01

    Full Text Available Since the original Institute of Medicine (IOM report was published there has been an accelerated development and adoption of health information technology with varying degrees of evidence about the impact of health information technology on patient safety. This article is intended to review the current available scientific evidence on the impact of different health information technologies on improving patient safety outcomes. We conclude that health information technology improves patient’s safety by reducing medication errors, reducing adverse drug reactions, and improving compliance to practice guidelines. There should be no doubt that health information technology is an important tool for improving healthcare quality and safety. Healthcare organizations need to be selective in which technology to invest in, as literature shows that some technologies have limited evidence in improving patient safety outcomes.

  5. The impact of health information technology on patient safety.

    Science.gov (United States)

    Alotaibi, Yasser K; Federico, Frank

    2017-12-01

    Since the original Institute of Medicine (IOM) report was published there has been an accelerated development and adoption of health information technology with varying degrees of evidence about the impact of health information technology on patient safety.  This article is intended to review the current available scientific evidence on the impact of different health information technologies on improving patient safety outcomes. We conclude that health information technology improves patient's safety by reducing medication errors, reducing adverse drug reactions, and improving compliance to practice guidelines. There should be no doubt that health information technology is an important tool for improving healthcare quality and safety. Healthcare organizations need to be selective in which technology to invest in, as literature shows that some technologies have limited evidence in improving patient safety outcomes.

  6. 78 FR 64504 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

    Science.gov (United States)

    2013-10-29

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH or..., Number 177, Pages 56235-56236. Contact Person for More Information: Price Connor, Ph.D., NIOSH Health...

  7. 10 CFR 871.2 - Public health and safety exemption.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Public health and safety exemption. 871.2 Section 871.2 Energy DEPARTMENT OF ENERGY AIR TRANSPORTATION OF PLUTONIUM § 871.2 Public health and safety exemption... property damage, or other significant threat to the public health and safety. [42 FR 48332, Sept. 23, 1977...

  8. 76 FR 60535 - Federal Advisory Council on Occupational Safety and Health

    Science.gov (United States)

    2011-09-29

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA--2011-0116] Federal Advisory Council on Occupational Safety and Health AGENCY: Occupational Safety and Health... the Federal Advisory Council on Occupational Safety and Health (FACOSH) until October 31, 2011. DATES...

  9. Occupational safety and health in the United kingdom: securing future workplace health and wellbeing.

    Science.gov (United States)

    Harrison, John

    2012-01-01

    The industrial revolution that took place in the United Kingdom (UK) between 1760 and 1830 lead to profound social change, with rapid urbanisation associated with squalid living conditions and epidemics of infectious diseases. The next 150 yr or so saw the introduction of many specific acts of health and safety legislation. In 1974 new overarching primary legislation was introduced that would produce a step change in the evolution of health and safety enforcement. In 2004, a new strategy was launched designed to promote a vision embedding health and safety as a cornerstone of a civilised society and to achieve a record of workplace health and safety that leads the world. Good progress in controlling many safety hazards and improving occupational hygiene has been made. There has been a fall in numbers of a wide range of injuries and diseases or illnesses since 2000. The challenge will be to maintain these favourable trends and prepare for new and emerging diseases at a time when resources are diminishing. The importance of occupational health within the UK health and safety strategy has been recognised over the last decade. Occupational health is developing a new paradigm which combines classical health risk management with assessment of workability, rehabilitation back to work and promotion of health and wellbeing. There is an increasing recognition that being in supported employment is good for health and reduces health inequalities.

  10. 75 FR 52988 - National Advisory Committee on Occupational Safety and Health

    Science.gov (United States)

    2010-08-30

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0012] National Advisory Committee on Occupational Safety and Health AGENCY: Occupational Safety and Health... Occupational Safety and Health (NACOSH) will meet September 14 and 15, 2010, in Washington, DC. In conjunction...

  11. 48 CFR 1852.223-72 - Safety and Health (Short Form).

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Safety and Health (Short... and Clauses 1852.223-72 Safety and Health (Short Form). As prescribed in 1823.7001(e), insert the following clause: Safety and Health (Short Form) (APR 2002) (a) Safety is the freedom from those conditions...

  12. Workplace safety and health for the veterinary health care team.

    Science.gov (United States)

    Gibbins, John D; MacMahon, Kathleen

    2015-03-01

    Veterinary clinic employers have a legal and ethical responsibility to provide a safe and healthy workplace. Clinic members are responsible for consistently using safe practices and procedures set up by their employer. Development and implementation of a customized comprehensive workplace safety and health program is emphasized, including an infection control plan. Occupational safety and health regulations are reviewed. The hazards of sharps, animal bites and scratches, and drugs are discussed. Strategies to prevent or minimize adverse health effects and resources for training and education are provided. Published by Elsevier Inc.

  13. Safety and Health Division achievements during 40 years

    International Nuclear Information System (INIS)

    Noriah Mod Ali

    2012-01-01

    During her speech, presenter outlined several issues regarding on establishment of Safety and Health Division since 40 years. This division contain of 3 sub unit; Physical Safety Group, Medical Physic Group and Non-ionizing Radiation group (NIR). The objectives of this division to implement R and D activities and services regarding safety and radiological health also non-radiological to ensure public safety, environment and asset suit with obligations established by authorities, IAEA standards and regulations.(author)

  14. The Health and Safety Executive's regulatory framework for control of nuclear criticality safety

    International Nuclear Information System (INIS)

    Smith, K.; Simister, D.N.

    1991-01-01

    In the United Kingdom the Health and Safety at Work Act, 1974 is the main legal instrument under which risks to people from work activities are controlled. Certain sections of the Nuclear Installations Act, 1965 which deal with the licensing of nuclear sites and the regulatory control of risks arising from them, including the risk from accidental criticality, are relevant statutory provisions of the Health and Safety at Work Act. The responsibility for safety rests with the operator who has to make and implement arrangements to prevent accidental criticality. The adequacy of these arrangements must be demonstrated in a safety case to the regulatory authorities. Operators are encouraged to treat each plant on its own merits and develop the safety case accordingly. The Nuclear Installations Inspectorate (NII), for its part, assesses the adequacy of the operator's safety case against the industry's own standards and criteria, but more particularly against the NII's safety assessment principles and guides, and international standards. Risks should be made as low as reasonably practicable. Generally, the NII seeks improvements in safety using an enforcement policy which operates at a number of levels, ranging from persuasion through discussion to the ultimate deterrent of withdrawal of a site licence. This paper describes the role of the NII, which includes a specialist criticality expertise, within the Health and Safety Executive, in regulating the nuclear sites from the criticality safety viewpoint. (Author)

  15. Nuclear health and safety. Status of GAO's environmental, safety, and health recommendations to DOE

    International Nuclear Information System (INIS)

    England-Joseph, Judy; Bannerman, Carl J.; Fenzel, William F.; Brack, David L.; Harter, Frederick A.

    1990-04-01

    DOE's operations are carried out at many contractor-operated sites around the country, including major sites within the nuclear weapons complex that are involved in the production of nuclear material for weapons and naval fuel. At these sites DOE contractors routinely use and generate large quantities of a wide range of hazardous and radioactive materials. Because these materials require special handling by workers. Also pursuant to Mar. 15, 1989, request, we provided you a report entitled Nuclear Health and Safety: Need for Improved Responsiveness to Problems at DOE Sites (GAO/RCED-90-101, Mar. 28, 1990). to prevent exposure to themselves or releases into the environment, DOE's weapons complex, considered in its entirety, is among the potentially more dangerous industrial operations in the world. Over the last decade, at the request of the Congress, we have carried out a series of assessments and evaluations of various aspects of the complex. In over 60 reports and testimonies published since 1990, we have called attention to the mounting problems facing DOE's nuclear weapons complex. This body of work includes (1) identifying serious, costly, and widespread environmental, safety, and health problems at DOE facilities, (2) calling for outside independent oversight of DOE's nuclear operations, and (3) making recommendations to DOE to strengthen its oversight, providing more detailed information and plans to the Congress, and improving its management and accounting practices. In total, our reports and testimonies have included 54 recommendations to DOE, in addition to recommendations to the Congress, concerning environmental, safety, and health matters at the complex. We consider 23 of the 54 recommendations to be still open. The open recommendations call for improvements such as tighter program controls and clearer standards and policies related to environmental, safety, and health matters

  16. Workplace Safety and Health Topics: Safety & Prevention

    Science.gov (United States)

    ... 1, 2018 Content source: National Institute for Occupational Safety and Health Education and Information Division Email Recommend Tweet YouTube Instagram Listen Watch RSS ABOUT About CDC Jobs Funding LEGAL Policies Privacy FOIA No Fear Act OIG 1600 Clifton Road Atlanta , GA 30329-4027 USA 800-CDC-INFO ( ...

  17. Health, Safety, and Environment Division: Annual progress report 1987

    Energy Technology Data Exchange (ETDEWEB)

    Rosenthal, M.A. (comp.)

    1988-04-01

    The primary responsibility of the Health, Safety, and Environment (HSE) Division at the Los Alamos National Laboratory is to provide comprehensive occupational health and safety programs, waste processing, and environment protection. These activities are designed to protect the worker, the public, and the environment. Many disciplines are required to meet the responsibilities, including radiation protection, industrial hygiene, safety, occupational medicine, environmental science, epidemiology, and waste management. New and challenging health and safety problems arise occasionally from the diverse research and development work of the Laboratory. Research programs in HSE Division often stem from these applied needs. These programs continue but are also extended, as needed to study specific problems for the Department of Energy and to help develop better occupational health and safety practices.

  18. Health, Safety, and Environment Division: Annual progress report 1987

    International Nuclear Information System (INIS)

    Rosenthal, M.A.

    1988-04-01

    The primary responsibility of the Health, Safety, and Environment (HSE) Division at the Los Alamos National Laboratory is to provide comprehensive occupational health and safety programs, waste processing, and environment protection. These activities are designed to protect the worker, the public, and the environment. Many disciplines are required to meet the responsibilities, including radiation protection, industrial hygiene, safety, occupational medicine, environmental science, epidemiology, and waste management. New and challenging health and safety problems arise occasionally from the diverse research and development work of the Laboratory. Research programs in HSE Division often stem from these applied needs. These programs continue but are also extended, as needed to study specific problems for the Department of Energy and to help develop better occupational health and safety practices

  19. Occupational Safety and Health Management System (OSHMS)

    International Nuclear Information System (INIS)

    Shyen, A.K.S.; Mohd Khairul Hakimin; Manisah Saedon

    2011-01-01

    Safe work environment has always been one of the major concerns at workplace. For this, Occupational Safety and Health Act 1994 has been promulgated for all workplaces to ensure the Safety, Health and Welfare of its employees and any person at workplaces. Malaysian Nuclear Agency therefore has started the initiative to review and improve the current Occupational Safety and Health Management System (OSHMS) by going for OHSAS 18001:2007 and MS 1722 standards certification. This would also help in our preparation to bid as the TSO (Technical Support Organization) for the NPP (Nuclear Power Plant) when it is established. With a developed and well maintained OSHMS, it helps to create a safe working condition and thus enhancing the productivity, quality and good morale. Ultimately, this will lead to a greater organization profit. However, successful OSHMS requires full commitment and support from all level of the organization to work hand in hand in implementing the safety and health policy. Therefore it is essential for all to acknowledge the progress of the implementation and be part of it. (author)

  20. Patient safety goals for the proposed Federal Health Information Technology Safety Center.

    Science.gov (United States)

    Sittig, Dean F; Classen, David C; Singh, Hardeep

    2015-03-01

    The Office of the National Coordinator for Health Information Technology is expected to oversee creation of a Health Information Technology (HIT) Safety Center. While its functions are still being defined, the center is envisioned as a public-private entity focusing on promotion of HIT related patient safety. We propose that the HIT Safety Center leverages its unique position to work with key administrative and policy stakeholders, healthcare organizations (HCOs), and HIT vendors to achieve four goals: (1) facilitate creation of a nationwide 'post-marketing' surveillance system to monitor HIT related safety events; (2) develop methods and governance structures to support investigation of major HIT related safety events; (3) create the infrastructure and methods needed to carry out random assessments of HIT related safety in complex HCOs; and (4) advocate for HIT safety with government and private entities. The convening ability of a federally supported HIT Safety Center could be critically important to our transformation to a safe and effective HIT enabled healthcare system. © The Author 2014. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  1. Surgical Safety Training of World Health Organization Initiatives.

    Science.gov (United States)

    Davis, Christopher R; Bates, Anthony S; Toll, Edward C; Cole, Matthew; Smith, Frank C T; Stark, Michael

    2014-01-01

    Undergraduate training in surgical safety is essential to maximize patient safety. This national review quantified undergraduate surgical safety training. Training of 2 international safety initiatives was quantified: (1) World Health Organization (WHO) "Guidelines for Safe Surgery" and (2) Department of Health (DoH) "Principles of the Productive Operating Theatre." Also, 13 additional safety skills were quantified. Data were analyzed using Mann-Whitney U tests. In all, 23 universities entered the study (71.9% response). Safety skills from WHO and DoH documents were formally taught in 4 UK medical schools (17.4%). Individual components of the documents were taught more frequently (47.6%). Half (50.9%) of the additional safety skills identified were taught. Surgical societies supplemented safety training, although the total amount of training provided was less than that in university curricula (P < .0001). Surgical safety training is inadequate in UK medical schools. To protect patients and maximize safety, a national undergraduate safety curriculum is recommended. © 2013 by the American College of Medical Quality.

  2. The President's Report on Occupational Safety and Health.

    Science.gov (United States)

    Department of Health, Education, and Welfare, Washington, DC.

    This report describes what has been done to implement the Occupational Safety and Health Act of 1970 during its first year of operation. The report examines the responsibilities of the Department of Labor for setting safety and health standards and also explores the activities of the Department of Health, Education, and Welfare in research and…

  3. Public Health Service Safety Program

    Energy Technology Data Exchange (ETDEWEB)

    McBride, J R [Southwestern Radiological Health Laboratory, Las Vegas, NV (United States)

    1969-07-01

    Off-Site Radiological Safety Programs conducted on past Plowshare experimental projects by the Southwestern Radiological Health Laboratory for the AEC will be presented. Emphasis will be placed on the evaluation of the potential radiation hazard to off-site residents, the development of an appropriate safety plan, pre- and post-shot surveillance activities, and the necessity for a comprehensive and continuing community relations program. In consideration of the possible wide use of nuclear explosives in industrial applications, a new approach to off-site radiological safety will be discussed. (author)

  4. Public Health Service Safety Program

    International Nuclear Information System (INIS)

    McBride, J.R.

    1969-01-01

    Off-Site Radiological Safety Programs conducted on past Plowshare experimental projects by the Southwestern Radiological Health Laboratory for the AEC will be presented. Emphasis will be placed on the evaluation of the potential radiation hazard to off-site residents, the development of an appropriate safety plan, pre- and post-shot surveillance activities, and the necessity for a comprehensive and continuing community relations program. In consideration of the possible wide use of nuclear explosives in industrial applications, a new approach to off-site radiological safety will be discussed. (author)

  5. eLCOSH : Electronic Library of Construction Occupational Safety and Health

    Science.gov (United States)

    Occupational Safety & Health Administration (OSHA) about Preventing Hearing Loss Caused by Chemical 2006 that drew attention to the safety of miners, hazard detecti... OSHA Safety and Health Information , 199... CDC study of occupational respiratory health analyzes rates of worker deaths from asthma by

  6. "Sitting in different chairs:" roles of the community health workers in the Poder es Salud/Power for Health Project.

    Science.gov (United States)

    Farquhar, S A; Wiggins, N; Michael, Y L; Luhr, G; Jordan, J; Lopez, A

    2008-07-01

    Evaluations of Community Health Worker programs consistently document improvements in health, yet few articles clearly describe the roles of Community Health Workers (CHWs) from the CHWs' perspective. This article presents the CHWs' points of view regarding the various roles they played in a community-based participatory research (CBPR) project, Poder es Salud/Power for Health in Portland, Oregon, including their roles as community organizers and co-researchers. Authors draw from an analysis of transcript data from in-depth interviews conducted with CHWs to present a description of the strategies employed by the CHWs to build leadership skills and knowledge among community members. CHWs also discuss their own personal and professional development. The analysis of the interviews suggests that CHWs valued their multiple roles with Poder es Salud/Power for Health and their participation on the project's Steering Committee. Based on CHWs' descriptions of their work, this type of involvement appears to build the CHWs' leadership skills and sense of efficacy to create change in their communities. By serving as community organizers and participating as producers of research, rather than acting merely as a deliverer of the intervention activities, the CHWs were able to build skills that make them more successful as CHWs.

  7. Workplace Safety and Health Topics: Industries and Occupations

    Science.gov (United States)

    ... Submit Search The CDC The National Institute for Occupational Safety and Health (NIOSH) Note: Javascript is disabled or is not ... September 6, 2017 Content source: National Institute for Occupational Safety and Health Education and Information Division Email Recommend Tweet YouTube ...

  8. 77 FR 39743 - Federal Advisory Council on Occupational Safety and Health (FACOSH)

    Science.gov (United States)

    2012-07-05

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0022] Federal Advisory Council on Occupational Safety and Health (FACOSH) AGENCY: Occupational Safety and Health... Occupational Safety and Health (FACOSH). SUMMARY: The Assistant Secretary of Labor for Occupational Safety and...

  9. 76 FR 39902 - Federal Advisory Council on Occupational Safety and Health (FACOSH)

    Science.gov (United States)

    2011-07-07

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2011-0116] Federal Advisory Council on Occupational Safety and Health (FACOSH) AGENCY: Occupational Safety and Health... Occupational Safety and Health (FACOSH). SUMMARY: The Assistant Secretary of Labor for Occupational Safety and...

  10. Health and safety in the nuclear age

    International Nuclear Information System (INIS)

    1988-01-01

    In their Communication to the Council on the development of Community measures for the application of Chapter III of the Euratom Treaty - Health and safety (COM(86) 434 final) the Commission of the European Communities announced their intention to initiate a 'Standing Conference on Health and Safety in the Nuclear Age' in order to contribute to an increase of information on nuclear activities. Following this proposition, the Commission (Directorate-General for Employment, Social Affairs and Education, Health and Safety Directorate) organized the first meeting of this Standing Conference in Luxembourg on 5, 6 and 7 October 1987 with the theme 'Information for the public and the media on health protection and safety with regard to nuclear activities'. About 120 participants representing scientific experts, the media, the bodies concerned with environmental or consumer protection, the social partners and interested national and international organizations, took part in this conference. It was the first time at European Community level that a meeting allowed an exchange of positions on the health problems related to ionizing radiation by all the parties interested in this subject. The Commission was asked to pursue this dialogue in order to improve the perception of citizens of the Community of the potential risks and the methods of protection brought into force in the nuclear field

  11. 77 FR 22358 - Occupational Safety and Health Administration

    Science.gov (United States)

    2012-04-13

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration Preparations for the 23rd Session of the UN Sub-Committee of Experts on the Globally Harmonized System of Classification and...: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Notice of public meeting. SUMMARY: OSHA...

  12. 75 FR 13783 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH)

    Science.gov (United States)

    2010-03-23

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration Maritime Advisory Committee for Occupational Safety and Health (MACOSH) AGENCY: Occupational Safety and Health Administration (OSHA), Labor... Health (MACOSH) was established under Section 7 of the Occupational Safety and Health (OSH) Act of 1970...

  13. Directory of Academic Programs in Occupational Safety and Health.

    Science.gov (United States)

    Weis, William J., III; And Others

    This booklet describes academic program offerings in American colleges and universities in the area of occupational safety and health. Programs are divided into five major categories, corresponding to each of the core disciplines: (1) occupational safety and health/industrial hygiene, (2) occupational safety, (3) industrial hygiene, (4)…

  14. Health and safety plan for operations performed for the Environmental Restoration Program

    Energy Technology Data Exchange (ETDEWEB)

    Trippet, W.A. II (IT Corp., (United States)); Reneau, M.; Morton, S.L. (EG and G Idaho, Inc., Idaho Falls, ID (United States))

    1992-04-01

    This document constitutes the generic health and safety plan for the Environmental Restoration Program (ERP). It addresses the health and safety requirements of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA); Occupational Safety and Health Administration (OSHA) 29 CFR 1910.120 standard; and EG G Idaho, Inc. This plan is a guide to individuals who must complete a health and safety plan for a task performed for the EPR. It contains a task specific addendum that, when completed, specifically addresses task specific health and safety issues. This health and safety plan reduces the time it takes to write a task specific health and safety plan by providing discussions of requirements, guidance on where specific information is located, and specific topics in the Addendum that must be discussed at a task level. This format encourages a complete task specific health and safety plan and a standard for all health and safety plans written for ERP.

  15. Health and safety plan for operations performed for the Environmental Restoration Program

    International Nuclear Information System (INIS)

    Trippet, W.A. II; Reneau, M.; Morton, S.L.

    1992-04-01

    This document constitutes the generic health and safety plan for the Environmental Restoration Program (ERP). It addresses the health and safety requirements of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA); Occupational Safety and Health Administration (OSHA) 29 CFR 1910.120 standard; and EG ampersand G Idaho, Inc. This plan is a guide to individuals who must complete a health and safety plan for a task performed for the EPR. It contains a task specific addendum that, when completed, specifically addresses task specific health and safety issues. This health and safety plan reduces the time it takes to write a task specific health and safety plan by providing discussions of requirements, guidance on where specific information is located, and specific topics in the Addendum that must be discussed at a task level. This format encourages a complete task specific health and safety plan and a standard for all health and safety plans written for ERP

  16. Supporting Fernald Site Closure with Integrated Health and Safety Plans as Documented Safety Analyses

    International Nuclear Information System (INIS)

    Kohler, S.; Brown, T.; Fisk, P.; Krach, F.; Klein, B.

    2004-01-01

    At the Fernald Closure Project (FCP) near Cincinnati, Ohio, environmental restoration activities are supported by Documented Safety Analyses (DSAs) that combine the required project-specific Health and Safety Plans, Safety Basis Requirements (SBRs), and Process Requirements (PRs) into single Integrated Health and Safety Plans (I-HASPs). These integrated DSAs employ Integrated Safety Management methodology in support of simplified restoration and remediation activities that, so far, have resulted in the decontamination and demolition (D and D) of over 200 structures, including eight major nuclear production plants. There is one of twelve nuclear facilities still remaining (Silos containing uranium ore residues) with its own safety basis documentation. This paper presents the status of the FCP's safety basis documentation program, illustrating that all of the former nuclear facilities and activities have now replaced. Basis of Interim Operations (BIOs) with I-HASPs as their safety basis during the closure process

  17. 29 CFR 1926.2 - Variances from safety and health standards.

    Science.gov (United States)

    2010-07-01

    ... from safety and health standards. (a) Variances from standards which are, or may be, published in this... 29 Labor 8 2010-07-01 2010-07-01 false Variances from safety and health standards. 1926.2 Section 1926.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION...

  18. Occupational Safety and Health Program at the West Valley Demonstration Project

    International Nuclear Information System (INIS)

    L. M. Calderon

    1999-01-01

    The West Valley Nuclear Services Co. LLC (WVNS) is committed to provide a safe, clean, working environment for employees, and to implement U.S. Department of Energy (DOE) requirements affecting worker safety. The West Valley Demonstration Project (WVDP) Occupational Safety and Health Program is designed to protect the safety, health, and well-being of WVDP employees by identifying, evaluating, and controlling biological, chemical, and physical hazards in the work place. Hazards are controlled within the requirements set forth in the reference section at the end of this report. It is the intent of the WVDP Occupational Safety and Health Program to assure that each employee is provided with a safe and healthy work environment. This report shows the logical path toward ensuring employee safety in planning work at the WVDP. In general, planning work to be performed safely includes: combining requirements from specific programs such as occupational safety, industrial hygiene, radiological control, nuclear safety, fire safety, environmental protection, etc.; including WVDP employees in the safety decision-making processes; pre-planning using safety support re-sources; and integrating the safety processes into the work instructions. Safety management principles help to define the path forward for the WVDP Occupational Safety and Health Program. Roles, responsibilities, and authority of personnel stem from these ideals. WVNS and its subcontractors are guided by the following fundamental safety management principles: ''Protection of the environment, workers, and the public is the highest priority. The safety and well-being of our employees, the public, and the environment must never be compromised in the aggressive pursuit of results and accomplishment of work product. A graded approach to environment, safety, and health in design, construction, operation, maintenance, and deactivation is incorporated to ensure the protection of the workers, the public, and the environment

  19. DOE standard: Integration of environment, safety, and health into facility disposition activities. Volume 1 of 2: Technical standard

    International Nuclear Information System (INIS)

    1998-05-01

    This Department of Energy (DOE) technical standard (referred to as the Standard) provides guidance for integrating and enhancing worker, public, and environmental protection during facility disposition activities. It provides environment, safety, and health (ES and H) guidance to supplement the project management requirements and associated guidelines contained within DOE O 430.1A, Life-Cycle Asset Management (LCAM), and amplified within the corresponding implementation guides. In addition, the Standard is designed to support an Integrated Safety Management System (ISMS), consistent with the guiding principles and core functions contained in DOE P 450.4, Safety Management System Policy, and discussed in DOE G 450.4-1, Integrated Safety Management System Guide. The ISMS guiding principles represent the fundamental policies that guide the safe accomplishment of work and include: (1) line management responsibility for safety; (2) clear roles and responsibilities; (3) competence commensurate with responsibilities; (4) balanced priorities; (5) identification of safety standards and requirements; (6) hazard controls tailored to work being performed; and (7) operations authorization. This Standard specifically addresses the implementation of the above ISMS principles four through seven, as applied to facility disposition activities

  20. Occupational Safety & Health. Inspectors' Opinions on Improving OSHA Effectiveness. Fact Sheet for Subcommittee on Health and Safety, Committee on Education and Labor, House of Representatives.

    Science.gov (United States)

    General Accounting Office, Washington, DC. Div. of Human Resources.

    Questionnaires gathered opinions of all Occupational Safety and Health Administration (OSHA) field supervisors and a randomly selected sample of one-third of the compliance officers about OSHA's approach to improving workplace safety and health. Major topics addressed were enforcement, safety and health standards, education and training, employer…

  1. Health and safety in clinical laboratories in developing countries: safety considerations.

    Science.gov (United States)

    Ejilemele, A A; Ojule, A C

    2004-01-01

    Clinical laboratories are potentially hazardous work areas. Health and safety in clinical laboratories is becoming an increasingly important subject as a result of the emergence of highly infectious diseases such as hepatitis and HIV. This is even more so in developing countries where health and safety have traditionally been regarded as low priority issues, considering the more important health problems confronting the health authorities in these countries. We conducted a literature search using the medical subheadings titles on the INTERNET over a period of twenty years and summarized our findings. This article identifies hazards in the laboratories and highlights measures to make the laboratory a safer work place. It also emphasizes the mandatory obligations of employers and employees towards the attainment of acceptable safety standards in clinical laboratories in Third World countries in the face of the current HIV/AIDS epidemic in many of these developing countries especially in the sub-Saharan Africa while accommodating the increasing work load in these laboratories. Both the employer and the employee have major roles to play in the maintenance of a safe working environment. This can be achieved if measures discussed are incorporated into everyday laboratory practice.

  2. Keeping nurse researchers safe: workplace health and safety issues.

    Science.gov (United States)

    Barr, Jennieffer; Welch, Anthony

    2012-07-01

    This article is a report of a qualitative study of workplace health and safety issues in nursing research. Researcher health and safety have become increasing concerns as there is an increased amount of research undertaken in the community and yet there is a lack of appropriate guidelines on how to keep researchers safe when undertaking fieldwork. This study employed a descriptive qualitative approach, using different sources of data to find any references to researcher health and safety issues. A simple descriptive approach to inquiry was used for this study. Three approaches to data collection were used: interviews with 15 researchers, audits of 18 ethics applications, and exploration of the literature between 1992 and 2010 for examples of researcher safety issues. Data analysis from the three approaches identified participant comments, narrative descriptions or statements focused on researcher health and safety. Nurse researchers' health and safety may be at risk when conducting research in the community. Particular concern involves conducting sensitive research where researchers are physically at risk of being harmed, or being exposed to the development of somatic symptoms. Nurse researchers may perceive the level of risk of harm as lower than the actual or potential harm present in research. Nurse researchers do not consistently implement risk assessment before and during research. Researcher health and safety should be carefully considered at all stages of the research process. Research focusing on sensitive data and vulnerable populations need to consider risk minimization through strategies such as appropriate researcher preparation, safety during data collection, and debriefing if required. © 2012 Blackwell Publishing Ltd.

  3. Food Safety: MedlinePlus Health Topic

    Science.gov (United States)

    ... Food and Drug Administration) Also in Spanish Animal Cloning and Food Safety (Food and Drug Administration) Chemicals ... Bethesda, MD 20894 U.S. Department of Health and Human Services National Institutes of Health Page last updated ...

  4. Curriculum: Integrating Health and Safety Into Engineering Curricula.

    Science.gov (United States)

    Talty, John T.

    1985-01-01

    National Institute for Occupational Safety and Health instituted a project in 1980 to encourage engineering educators to focus on occupational safety and health issues in engineering curricula. Progress to date is outlined, considering specific results in curriculum development, engineering society interaction, and formation of a teaching…

  5. Impact of Construction Health & Safety Regulations on Project ...

    African Journals Online (AJOL)

    Impact of Construction Health & Safety Regulations on Project Parameters in Nigeria: Consultants and Contractors View. ... The study recommends that better attention is given to health and safety should as a project parameter and that related practice notes and guidelines should be evolved for all project stakeholders.

  6. 78 FR 21977 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH)

    Science.gov (United States)

    2013-04-12

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration Maritime Advisory Committee for Occupational Safety and Health (MACOSH) AGENCY: Occupational Safety and Health Administration (OSHA), Labor... Maritime Advisory Committee for Occupational Safety and Health. The Committee will better enable OSHA to...

  7. 75 FR 35090 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH)

    Science.gov (United States)

    2010-06-21

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration Maritime Advisory Committee for Occupational Safety and Health (MACOSH) AGENCY: Occupational Safety and Health Administration (OSHA), Labor... for Occupational Safety and Health (MACOSH or Committee) was established under Section 7 of the...

  8. Role and tasks of the Mine Safety and Health Administration

    Energy Technology Data Exchange (ETDEWEB)

    Bradecki, W. (Wyzszy Urzad Gorniczy, Katowice (Poland))

    1992-01-01

    Discusses the visit of 2 representatives of the Mine Safety and Health Administration and the West Mining Company from the United States to Poland in November 1991. During the visit, occupational safety in underground coal mines in Upper Silesia was evaluated. Selected aspects of experience and organization schemes of the Mine Safety and Health Administration are evaluated from the point of view of their use in Poland to increase occupational safety in coal mining. The following aspects are discussed: Mine Safety and Health Administration and its budget (US$ 186 million), personnel (2,700), research institutes that specialize in mine safety (the National Institute of Occupational Safety and Health, Bureau of Mines), natural hazards associated with mining, mine safety in underground and surface coal mines in the USA in relation to number of coal miners and coal output, job safety analysis as a key to the success of the MSHA, increased hazards in small mines (Pennsylvania, West Virginia, Virginia and Kentucky), problems of drug addiction and alcoholism among coal miners.

  9. Safety and health: Principles and practices in the laboratory

    International Nuclear Information System (INIS)

    Fakhrul Razi Ahmadun; Guan, Chuan Teong; Mohd Halim Shah Ismail

    2005-01-01

    Ignorance, carelessness or improper practices in the laboratory or the improper handling of hazardous or toxic materials may lead to work accidents and work-related ill-health. Laboratory users and administrators cannot afford to overlook these possible consequences due to the misconduct of laboratory practices and should decide how best to manage the health and safety aspects in the laboratory. This book has been written for safety representatives of colleges and universities, for lectures, teachers and students, and for researchers working in laboratories. It is also for everyone responsible for laboratory safety, laboratory accidents and their consequences. The emphasis is on hazards to health and safety, with the focus on the general hazards in the laboratory, how they arise and how to prevent, how to eliminate and control them. Special hazards will also be discussed such as radiation hazards and human factors. This book also provides information on governmental and non-governmental agencies and authorities, emergency contact numbers of relevant authorities, a list of Malaysia occupational safety and health related legislation and some useful occupational safety and health web sites. Readers will find that the information contained in this book will serve as the foundation for laboratory users safety policy. A set of Laboratory Safety Forms for a typical laboratory is also available in the appendix for reference. Laboratory users can use and adapt these forms for their own laboratory requirements. (author)

  10. 75 FR 62147 - Federal Advisory Council on Occupational Safety and Health (FACOSH)

    Science.gov (United States)

    2010-10-07

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0031] Federal Advisory Council on Occupational Safety and Health (FACOSH) AGENCY: Occupational Safety and Health... Advisory Council on Occupational Safety and Health (FACOSH) will meet October 21, 2010, in Washington, DC...

  11. 77 FR 22355 - Federal Advisory Council on Occupational Safety and Health (FACOSH)

    Science.gov (United States)

    2012-04-13

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0006] Federal Advisory Council on Occupational Safety and Health (FACOSH) AGENCY: Occupational Safety and Health... Federal Advisory Council on Occupational Safety and Health (FACOSH) will meet May 3, 2012, in Washington...

  12. 76 FR 71077 - Federal Advisory Council on Occupational Safety and Health (FACOSH)

    Science.gov (United States)

    2011-11-16

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2011-0192] Federal Advisory Council on Occupational Safety and Health (FACOSH) AGENCY: Occupational Safety and Health... Federal Advisory Council on Occupational Safety and Health (FACOSH) will meet Thursday, December 1, 2011...

  13. 77 FR 58174 - Federal Advisory Council on Occupational Safety and Health (FACOSH)

    Science.gov (United States)

    2012-09-19

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0006] Federal Advisory Council on Occupational Safety and Health (FACOSH) AGENCY: Occupational Safety and Health... Occupational Safety and Health (FACOSH) will meet October 18, 2012, in Washington, DC. DATES: FACOSH meeting...

  14. 78 FR 68865 - Federal Advisory Council on Occupational Safety and Health (FACOSH)

    Science.gov (United States)

    2013-11-15

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2013-0013] Federal Advisory Council on Occupational Safety and Health (FACOSH) AGENCY: Occupational Safety and Health... Occupational Safety and Health (FACOSH) will meet December 5, 2013, in Washington, DC. DATES: FACOSH meeting...

  15. 78 FR 30337 - Federal Advisory Council on Occupational Safety and Health (FACOSH)

    Science.gov (United States)

    2013-05-22

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2013-0013] Federal Advisory Council on Occupational Safety and Health (FACOSH) AGENCY: Occupational Safety and Health... Federal Advisory Council on Occupational Safety and Health (FACOSH) will meet on June 6, 2013, in...

  16. Design of an indicator for health and safety governance

    OpenAIRE

    Minguillón, Roberto F.; Yacuzzi, Enrique

    2009-01-01

    Occupational Health and Safety Governance (OHSG) is a branch of Corporate Governance by which the board directs and controls labor risks created by their own enterprise. The OHSG concept is relatively new; unlike Occupational Health and Safety Management, which is mostly related to the work of managerial ranks, OHSG deals with principles, the interests of stakeholders, and the work of directors. The paper defines the new concept, OHSG, develops an original health and safety indicator, and pre...

  17. ES-2 Dummy Biomechanical Responses.

    Science.gov (United States)

    Byrnes, Katie; Abramczyk, Joseph; Berliner, Jeff; Irwin, Annette; Jensen, Jack; Kowsika, Murthy; Mertz, Harold J; Rouhana, Stephen W; Scherer, Risa; Shi, Yibing; Sutterfield, Aleta; Xu, Lan; Tylko, Suzanne; Dalmotas, Dainius

    2002-11-01

    This technical paper presents the results of biomechanical testing conducted on the ES-2 dummy by the Occupant Safety Research Partnership and Transport Canada. The ES-2 is a production dummy, based on the EuroSID-1 dummy, that was modified to further improve testing capabilities as recommended by users of the EuroSID-1 dummy. Biomechanical response data were obtained by completing a series of drop, pendulum, and sled tests that are outlined in the International Organization of Standardization Technical Report 9790 that describes biofidelity requirements for the midsize adult male side impact dummy. A few of the biofidelity tests were conducted on both sides of the dummy to evaluate the symmetry of its responses. Full vehicle crash tests were conducted to verify if the changes in the EuroSID-1, resulting in the ES-2 design, did improve the dummy's testing capability. In addition to the biofidelity testing, the ES-2 dummy repeatability, reproducibility and durability are discussed. Finally, this technical paper will compare the biofidelity ratings of the current adult side impact dummies with the ES-2 dummy, which received an overall dummy biofidelity rating of 4.6.

  18. Handbook of laboratory health and safety measures

    International Nuclear Information System (INIS)

    Pal, S.B.

    1985-01-01

    The application of radioactive isotopes and various scientific instruments based on different ionizing and non-ionizing radiation have brought new safety problems to laboratory workers today. Therefore, there is a need to revise present knowledge of safety measures to deal with new hazards, thus broadening the outlook towards health and safety measures for contemporary laboratory staff. This handbook presents a series of articles on current knowledge regarding laboratory safety

  19. OSHA Training Programs. Module SH-48. Safety and Health.

    Science.gov (United States)

    Center for Occupational Research and Development, Inc., Waco, TX.

    This student module on OSHA (Occupational Safety and Health Act) training programs is one of 50 modules concerned with job safety and health. This module provides a list of OSHA training requirements and describes OSHA training programs and other safety organizations' programs. Following the introduction, 11 objectives (each keyed to a page in the…

  20. 48 CFR 352.223-70 - Safety and health.

    Science.gov (United States)

    2010-10-01

    ... laboratories; and other applicable occupational health and safety standards issued by OSHA and included in 29... Commission Standards and Regulations, pursuant to the Energy Reorganization Act of 1974 (42 U.S.C. 5801 et... health and safety operating procedures and practices for both personnel and facilities: (i) Biosafety in...

  1. Nature-Based Strategies for Improving Urban Health and Safety.

    Science.gov (United States)

    Kondo, Michelle C; South, Eugenia C; Branas, Charles C

    2015-10-01

    Place-based programs are being noticed as key opportunities to prevent disease and promote public health and safety for populations at-large. As one key type of place-based intervention, nature-based and green space strategies can play an especially large role in improving health and safety for dwellers in urban environments such as US legacy cities that lack nature and greenery. In this paper, we describe the current understanding of place-based influences on public health and safety. We focus on nonchemical environmental factors, many of which are related to urban abandonment and blight. We then review findings from studies of nature-based interventions regarding impacts on health, perceptions of safety, and crime. Based on our findings, we suggest that further research in this area will require (1) refined measures of green space, nature, and health and safety for cities, (2) interdisciplinary science and cross-sector policy collaboration, (3) observational studies as well as randomized controlled experiments and natural experiments using appropriate spatial counterfactuals and mixed methods, and (4) return-on-investment calculations of potential economic, social, and health costs and benefits of urban greening initiatives.

  2. The Danish patient safety experience: the Act on Patient Safety in the Danish Health care system

    DEFF Research Database (Denmark)

    Lundgaard, Mette; Rabøl, Louise; Jensen, Elisabeth Agnete Brøgger

    2005-01-01

    This paper describes the process that lead to the passing of the Act for Patient Safety in the Danisk health care sytem, the contents of the act and how the act is used in the Danish health care system. The act obligates frontline health care personnel to report adverse events, hospital owners...... to act on the reports and the National Board of Health to commuicate the learning nationally. The act protects health care providers from sanctions as a result of reporting. In January 2004, the Act on Patient Safety in the Danish health care system was put into force. In the first twelve months 5740...... adverse events were reported. the reports were analyzed locally (hospital and region), anonymized ad then sent to the National Board af Health. The Act on Patient Safety has driven the work with patient safety forward but there is room for improvement. Continuous and improved feedback from all parts...

  3. 76 FR 28816 - Federal Advisory Council on Occupational Safety and Health (FACOSH)

    Science.gov (United States)

    2011-05-18

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2011-0061] Federal Advisory Council on Occupational Safety and Health (FACOSH) AGENCY: Occupational Safety and Health... Advisory Council on Occupational Safety and Health (FACOSH) will meet June 7, 2011, in Washington, DC. On...

  4. Health and safety at DNE [Dounreay Nuclear Power Development Establishment

    International Nuclear Information System (INIS)

    Walford, J.G.; Tyler, G.R.

    1988-11-01

    This report reviews health and safety experience at the UKAEA's Dounreay Nuclear Power Development Establishment for 1986 and gives relevant data in the fields of health physics and general safety. It includes sections on: organization, policy and training; monitoring of the working environment; personnel monitoring; protection of the public; radiological incidents; and non-radiological health and safety. (author)

  5. Safety and health five-year plan, Fiscal years 1995--1999

    International Nuclear Information System (INIS)

    1994-10-01

    This report describes efforts by the Department of Energy (DOE) to size and allocate funding to safety and health activities that protect workers and the public from harm. Although it is well recognized that virtually every aspect of an operation has health and safety implications, this effort is directed at identifying planned efforts specifically directed at health and safety. The initial effort, to compile information for the period covering FY 1994--1998, served two primary needs: (1) to document what was actually taking place in the DOE Complex, from a budget and resource utilization standpoint (how the complex was reacting to the calls for greater protection for workers and the public); and (2) to embark on an effort to utilize forward-looking management plans to allocate resources to meet safety and health needs (to begin to be proactive). It was recognized that it would take several years to achieve full acceptance and implementation of a single, DOE-wide approach toward planning for safety and health, and to develop plans that emphasized the benefits from both risk management and accident prevention strategies. This report, describing safety and health plans and budgets for FY 1995, reflects the increasing acceptance of risk-based strategies in the development of safety and health plans. More operations are using the prioritization methodology recommended for the safety and health planning process, and more operations have begun to review planned expenditures of resources to better assure that resources are allocated to the highest risk reduction activities

  6. 21 CFR 25.16 - Public health and safety emergencies.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Public health and safety emergencies. 25.16... ENVIRONMENTAL IMPACT CONSIDERATIONS Agency Actions Requiring Environmental Consideration § 25.16 Public health... importance to the public health or safety, may make full adherence to the procedural provisions of NEPA and...

  7. Health IT for Patient Safety and Improving the Safety of Health IT.

    Science.gov (United States)

    Magrabi, Farah; Ong, Mei-Sing; Coiera, Enrico

    2016-01-01

    Alongside their benefits health IT applications can pose new risks to patient safety. Problems with IT have been linked to many different types of clinical errors including prescribing and administration of medications; as well as wrong-patient, wrong-site errors, and delays in procedures. There is also growing concern about the risks of data breach and cyber-security. IT-related clinical errors have their origins in processes undertaken to design, build, implement and use software systems in a broader sociotechnical context. Safety can be improved with greater standardization of clinical software and by improving the quality of processes at different points in the technology life cycle, spanning design, build, implementation and use in clinical settings. Oversight processes can be set up at a regional or national level to ensure that clinical software systems meet specific standards. Certification and regulation are two mechanisms to improve oversight. In the absence of clear standards, guidelines are useful to promote safe design and implementation practices. Processes to identify and mitigate hazards can be formalised via a safety management system. Minimizing new patient safety risks is critical to realizing the benefits of IT.

  8. The occupational safety of health professionals working at community and family health centers.

    Science.gov (United States)

    Ozturk, Havva; Babacan, Elif

    2014-10-01

    Healthcare professionals encounter many medical risks while providing healthcare services to individuals and the community. Thus, occupational safety studies are very important in health care organizations. They involve studies performed to establish legal, technical, and medical measures that must be taken to prevent employees from sustaining physical or mental damage because of work hazards. This study was conducted to determine if the occupational safety of health personnel at community and family health centers (CHC and FHC) has been achieved. The population of this cross-sectional study comprised 507 nurses, 199 physicians, and 237 other medical personnel working at a total of 18 family health centers (FHC) and community health centers (CHC) in Trabzon, Turkey. The sample consisted of a total of 418 nurses, 156 physicians, and 123 other medical personnel. Sampling method was not used, and the researchers tried to reach the whole population. Data were gathered with the Occupational Safety Scale (OSS) and a questionnaire regarding demographic characteristics and occupational safety. According to the evaluations of all the medical personnel, the mean ± SD of total score of the OSS was 3.57 ± 0.98; of the OSS's subscales, the mean ± SD of the health screening and registry systems was 2.76 ± 1.44, of occupational diseases and problems was 3.04 ± 1.3 and critical fields control was 3.12 ± 1.62. In addition, occupational safety was found more insufficient by nurses (F = 14.18; P occupational safety to be insufficient as related to protective and supportive activities.

  9. Machine and Woodworking Tool Safety. Module SH-24. Safety and Health.

    Science.gov (United States)

    Center for Occupational Research and Development, Inc., Waco, TX.

    This student module on machine and woodworking tool safety is one of 50 modules concerned with job safety and health. This module discusses specific practices and precautions concerned with the efficient operation and use of most machine and woodworking tools in use today. Following the introduction, 13 objectives (each keyed to a page in the…

  10. To Your Health: NLM update transcript - Gun safety strategies

    Science.gov (United States)

    ... transcript040918.html To Your Health: NLM update Transcript Gun safety strategies : 04/09/2018 To use the ... on weekly topics. An evidence-based, public health gun safety strategy that is consistent with second amendment ...

  11. Occupational Safety and Health in Venezuela.

    Science.gov (United States)

    Caraballo-Arias, Yohama

    2015-01-01

    Venezuela has pioneered a preventive-focused and comprehensive movement for Occupational Safety and Health (OSH) in Latin America. However, despite being an oil-rich country, it has some of the lowest salaries for their workers and highest levels of hyperinflation, devaluation, crime, and violence of the world. Review the current status and challenges on relevant aspects of OSH in Venezuela. Review of literature and documents from national governments, UN agencies, NGOs, and the Venezuelan government concerning OSH and related topics since 1986. Reformed in 2005, the Organic Law on Prevention, Conditions and Environment (LOPCYMAT) was a fundamental moment of change for OSH. Factors which have impacted OSH the strongest are (i) the creation of the National Institute of Occupational Safety and Health (INPSASEL) and (ii) the socioeconomic crisis Venezuela is going through. Venezuela's laws are innovative and yet non-compliance is enormous. Almost half of the population works in the informal sector. Following the International Labor Office projections, 5 people die per day in Venezuela due to occupational accidents or diseases, making health and safety at work a luxury rather than a right. The quality of life for the average worker has deteriorated, affecting not only health but the overall well-being of all Venezuelans. The political and socio-economic situation has led to a mass exodus of more than 1.6 million highly qualified and talented professionals. Many statistics concerning OSH are not updated and are unreliable regarding occupational accidents and diseases. There is a substantial difference between what is written to protect individual Venezuelans in the workplace and the reality of workplace conditions. Substantial governmental actions are needed in the immediate future to improve occupational safety and health of Venezuelan workers. Copyright © 2015 The Author. Published by Elsevier Inc. All rights reserved.

  12. Telecommuting: Occupational health considerations for employee health and safety.

    Science.gov (United States)

    Healy, M L

    2000-06-01

    1. Information technology has moved "work" out of a centralized location. Employees who telecommute pose significant challenges and considerations for the practice of occupational health nursing. 2. Employer and employee benefits associated with telecommuting are reportedly associated with high levels of job satisfaction. However, the occupational health and safety risks of this new work environment need to be fully assessed and understood. 3. The ergonomic controls to minimize the risk of repetitive motion injuries are the same for both office and home locations. Additional attention need to be paid to implementing risk controls for other physical hazards and psychosocial considerations, as well as personal safety and security issues. 4. The scope of occupational health nursing practice needs to remain dynamic, recognizing the impact new technologies have on the workplace, to continue to meet the needs of the changing workplace.

  13. 76 FR 32374 - National Advisory Committee on Occupational Safety and Health (NACOSH)

    Science.gov (United States)

    2011-06-06

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2011-0065] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... on Occupational Safety and Health (NACOSH) and NACOSH subgroups. SUMMARY: The National Advisory...

  14. 75 FR 28659 - National Advisory Committee on Occupational Safety and Health (NACOSH)

    Science.gov (United States)

    2010-05-21

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0012] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... on Occupational Safety and Health (NACOSH). SUMMARY: The National Advisory Committee on Occupational...

  15. 75 FR 2890 - OSHA Listens: Occupational Safety and Health Administration Stakeholder Meeting

    Science.gov (United States)

    2010-01-19

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0004] OSHA Listens: Occupational Safety and Health Administration Stakeholder Meeting AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Notice of public meeting. SUMMARY: The Occupational Safety...

  16. 75 FR 78775 - National Advisory Committee on Occupational Safety and Health (NACOSH)

    Science.gov (United States)

    2010-12-16

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0012] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... on Occupational Safety and Health (NACOSH) and NACOSH subgroup meetings. SUMMARY: The National...

  17. 75 FR 56549 - National Institute for Occupational Safety and Health (NIOSH), Safety and Occupational Health...

    Science.gov (United States)

    2010-09-16

    ... Suites Hotel, 1900 Diagonal Road, Alexandria, Virginia, 22314, Telephone (703) 684-5900, Fax (703) 684... conduct of Study Section business and for the study section to consider safety and occupational health...

  18. Worksite health and safety climate: scale development and effects of a health promotion intervention.

    Science.gov (United States)

    Basen-Engquist, K; Hudmon, K S; Tripp, M; Chamberlain, R

    1998-01-01

    Environmental influences on health and health behavior have an important place in research on worksite health promotion. We tested the validity and internal consistency of a new measure of organizational health and safety climate that was used in a large randomized trial of a worksite cancer prevention program (the Working Well Trial). The resulting scales then were applied to assess intervention effects. This study uses data from a subset of 40 worksites in the Working Well Trial. Employees at 20 natural gas pipeline worksite and 20 rural electrical cooperatives completed a cross-sectional questionnaire at baseline and 3-year follow-up. A factor analysis of this self-report instrument produced a two-factor solution. The resulting health and safety climate scales had good internal consistency (Cronbach's alpha = 0.74 and 0.82, respectively) and concurrent validity. The health climate scale was correlated more highly with organizational measures that were indicative of a supportive health climate than those indicating supportive safety climate, while the reverse was true of the safety climate scale. Changes in health climate were associated with the number of smoking and smokeless tobacco programs offered at the worksites at the time of the 3-year follow-up (r = 0.46 and 0.42, respectively). The scales were not correlated with most employee health behaviors. The health climate scores increased at intervention worksites, compared with scores at control worksites (F[1,36] = 7.57, P = 0.009). The health and safety climate scales developed for this study provide useful instruments for measuring organizational change related to worksite health promotion activities. The Working Well Intervention resulted in a significant improvement in worksite health climate.

  19. Linking Environmental Sustainability, Health, and Safety Data in Health Care: A Research Roadmap.

    Science.gov (United States)

    Kaplan, Susan B; Forst, Linda

    2017-08-01

    Limited but growing evidence demonstrates that environmental sustainability in the health-care sector can improve worker and patient health and safety. Yet these connections are not appreciated or understood by decision makers in health-care organizations or oversight agencies. Several studies demonstrate improvements in quality of care, staff satisfaction, and work productivity related to environmental improvements in the health-care sector. A pilot study conducted by the authors found that already-collected data could be used to evaluate impacts of environmental sustainability initiatives on worker and patient health and safety, yet few hospitals do so. Future research should include a policy analysis of laws that could drive efforts to integrate these areas, elucidation of organizational models that promote sharing of environmental and health and safety data, and development of tools and methods to enable systematic linkage and evaluation of these data to expand the evidence base and improve the hospital environment.

  20. 75 FR 28661 - National Advisory Committee on Occupational Safety and Health (NACOSH)

    Science.gov (United States)

    2010-05-21

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0012] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... Committee on Occupational Safety and Health (NACOSH). SUMMARY: The Assistant Secretary of Labor for...

  1. 76 FR 60085 - National Advisory Committee on Occupational Safety and Health (NACOSH)

    Science.gov (United States)

    2011-09-28

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2011-0065] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... Assistant Secretary of Labor for Occupational Safety and Health requests nominations for membership on...

  2. 77 FR 46126 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH)

    Science.gov (United States)

    2012-08-02

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0003] Maritime Advisory Committee for Occupational Safety and Health (MACOSH) AGENCY: Occupational Safety and... Advisory Committee for Occupational Safety and Health. SUMMARY: OSHA invites interested persons to submit...

  3. 76 FR 73689 - National Advisory Committee on Occupational Safety and Health (NACOSH)

    Science.gov (United States)

    2011-11-29

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2011-0065] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... on Occupational Safety and Health (NACOSH) and NACOSH Work Groups. SUMMARY: The National Advisory...

  4. 77 FR 64549 - National Advisory Committee on Occupational Safety and Health (NACOSH)

    Science.gov (United States)

    2012-10-22

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0019] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... on Occupational Safety and Health (NACOSH) and a NACOSH Work Group. SUMMARY: NACOSH will meet...

  5. 76 FR 54806 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH)

    Science.gov (United States)

    2011-09-02

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2011-0007] Maritime Advisory Committee for Occupational Safety and Health (MACOSH) AGENCY: Occupational Safety and... Committee for Occupational Safety and Health (MACOSH) was established under Section 7 of the Occupational...

  6. 77 FR 43616 - National Advisory Committee on Occupational Safety and Health (NACOSH)

    Science.gov (United States)

    2012-07-25

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0019] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... Assistant Secretary of Labor for Occupational Safety and Health requests nominations for membership on...

  7. Opportunities for health and safety professionals in environmental restoration work

    International Nuclear Information System (INIS)

    Norris, A.E.

    1991-01-01

    The safety of workers in waste management and in environmental restoration work is regulated in large part by the Occupational Safety and Health Administration (OSHA). Many of the OSHA rules are given in Part 1910, Occupational Safety and Health Standards, of Title 29 of the Code of Federal Regulations (CFR). Section 120 of 29 CFR 1910 specifically addresses hazardous waste operations and emergency response operations. The remainder of this discussion focuses on clean-up operations. The purpose of this paper is to review areas of employment opportunity in environmental restoration work for health and safety professionals. Safety and health risk analyses are mentioned as one area of opportunity, and these analyses are required by the standards. Site safety and health supervisors will be needed during field operations. Those who enjoy teaching might consider helping to meet the training needs that are mandated. Finally, engineering help both to separate workers from hazards and to improve personal protective equipment, when it must be worn, would benefit those actively involved in environmental restoration activities

  8. 76 FR 12963 - Request for Information (NOT-ES-11-007): Needs and Approaches for Assessing the Human Health...

    Science.gov (United States)

    2011-03-09

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Request for Information (NOT-ES-11-007): Needs and Approaches for Assessing the Human Health Impacts of Exposure to Mixtures AGENCY: National Institutes of... analyzes its findings to assess potential hazards to human health from exposure to environmental substances...

  9. 77 FR 58488 - Hawaii State Plan for Occupational Safety and Health

    Science.gov (United States)

    2012-09-21

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration 29 CFR Part 1952 [Docket ID. OSHA 2012-0029] RIN 1218-AC78 Hawaii State Plan for Occupational Safety and Health AGENCY: Occupational... announces the Occupational Safety and Health Administration's (OSHA) decision to modify the Hawaii State...

  10. Safety and Health Topics: Asbestos

    Science.gov (United States)

    ... Safety and Health Program Recommendations It's the Law Poster REGULATIONS Law and Regulations Standard Interpretations Training Requirements ... page requires that javascript be enabled for some elements to function correctly. Please contact the OSHA Directorate ...

  11. How Productive Is Workplace Health and Safety?

    DEFF Research Database (Denmark)

    Buhai, I. Sebastian; Cottini, Elena; Westergaard-Nielsen, Niels

    2017-01-01

    In this paper, we investigate the causal impact of workplace health and safety practices on firm performance, using Danish longitudinal matched employer–employee data merged with unique cross-sectional representative firm survey data on work environment conditions. We estimate standard production...... functions, augmented with workplace environment indicators, addressing both time-invariant and time-varying potentially relevant unobservables in the production process. We find positive and large productivity effects of improved physical dimensions of the health and safety environment, specifically...

  12. 77 FR 31398 - National Advisory Committee on Occupational Safety and Health (NACOSH)

    Science.gov (United States)

    2012-05-25

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0019] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... on Occupational Safety and Health (NACOSH) and NACOSH Work Groups. SUMMARY: NACOSH will meet June 20...

  13. 77 FR 33495 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH)

    Science.gov (United States)

    2012-06-06

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0003] Maritime Advisory Committee for Occupational Safety and Health (MACOSH) AGENCY: Occupational Safety and..., Docket No. OSHA- 2012-0003, U.S. Department of Labor, Occupational Safety and Health Administration, Room...

  14. 76 FR 18798 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH)

    Science.gov (United States)

    2011-04-05

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No OSHA-2011-0007] Maritime Advisory Committee for Occupational Safety and Health (MACOSH) AGENCY: Occupational Safety and.... MACOSH will contribute to OSHA's performance of the duties imposed by the Occupational Safety and Health...

  15. 77 FR 5577 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH)

    Science.gov (United States)

    2012-02-03

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0003] Maritime Advisory Committee for Occupational Safety and Health (MACOSH) AGENCY: Occupational Safety and..., Docket No. OSHA- 2012-0003, U.S. Department of Labor, Occupational Safety and Health Administration, Room...

  16. Occupational Safety And Health (Osh From Islamic Perspective: A Conceptual Study

    Directory of Open Access Journals (Sweden)

    Afifah Binti Ismail

    2018-05-01

    Full Text Available ABSTRACT This paper illustrates occupational safety and health (OSH based on Islamic perspective in human resource management. This paper has been written based on the following objectives; ato state the duty of employer to provide safety workplace and to concern on employee health; bto list out the management system of OSH based on Islamic perspective as preventive measure. A purely qualitative approach of literature review was done and Islamic OSH is derived from Islamic principles which are guide by Al-Quran and sunnah. The responsibility to preserve safety and health of employee does not only relies to the employer solely but involved all workers, the government and the authority bodies as the runner for the Occupational safety and Health Act  OSHA 1994, Islamic order’s and policy to be implemented in the organization. The Occupational Safety and Health Master Plan (OSHMP 2020 is a tremendous incentive by the Ministry of Human Resource to cope and minimize the number of accident and injuries in Malaysia.   Keywords: Islamic occupational safety and health, employee safety and health, Islamic management system of OSH

  17. 29 CFR 1960.11 - Evaluation of occupational safety and health performance.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Evaluation of occupational safety and health performance. 1960.11 Section 1960.11 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... AND HEALTH PROGRAMS AND RELATED MATTERS Administration § 1960.11 Evaluation of occupational safety and...

  18. Organizational and methodological aspects for contemporary health and safety management system

    Directory of Open Access Journals (Sweden)

    Sugak Evgeny

    2017-01-01

    Full Text Available Industrial injuries and work-related disorders considerable lowering we are facing in developed countries may be due to switching to a new health and safety management system entitled “Occupational Safety and Health Management System”. The Russian Federation has prepared certain regulatory documents prescribing some suggestions regarding implementing the contemporary system for industrial injuries prevention based upon the methods for professional risks management. However, despite the efforts made by the Russian Government, reformation of the health and safety management system at various companies is being performed rather slowly that may be as well owing to poor competence of managers and specialists regarding contemporary labor safety model content, methodical and organizational novations in the sphere of occupational safety and health management.. The article refers to a number of principal issues distinguishing the new health and safety management system from conventional approach.

  19. Performance scorecard for occupational safety and health management systems

    Directory of Open Access Journals (Sweden)

    Hernâni Veloso Neto

    2012-06-01

    Full Text Available The pro-active and systematic search for best performances should be the two assumptions of any management system, so safety and health management in organizations must also be guided by these same precepts. However, the scientific production evidences that the performance evaluation processes in safety and health continue to be guided, in their essence, by intermittency, reactivity and negativity, which are not consistent with the assumptions referenced above. Therefore, it is essential that health and safety at work management systems (HSW MS are structured from an active and positive viewpoint, focusing on continuous improvement. This implies considering performance evaluation processes that incorporate, on the one hand, monitoring, measuring and verification procedures, and on the other hand, structured matrixes of results that capture the key factors of success, by mobilizing both reactive and proactive indicators. One of the instruments that can fulfill these precepts of health and safety performance evaluation is the SafetyCard, a performance scorecard for HSW MS that we developed and will seek to outline and demonstrate over this paper.

  20. Hawaii State Plan for Occupational Safety and Health. Final rule.

    Science.gov (United States)

    2012-09-21

    This document announces the Occupational Safety and Health Administration's (OSHA) decision to modify the Hawaii State Plan's ``final approval'' determination under Section 18(e) of the Occupational Safety and Health Act (the Act) and to transition to ``initial approval'' status. OSHA is reinstating concurrent federal enforcement authority over occupational safety and health issues in the private sector, which have been solely covered by the Hawaii State Plan since 1984.

  1. 29 CFR 1960.35 - National Institute for Occupational Safety and Health.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false National Institute for Occupational Safety and Health. 1960.35 Section 1960.35 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... § 1960.35 National Institute for Occupational Safety and Health. (a) The Director of the National...

  2. Safety Capital: The Management of Organizational Knowledge on Occupational Health and Safety

    Science.gov (United States)

    Nunez, Imanol; Villanueva, Mikel

    2011-01-01

    Purpose: The concept of Safety Capital was developed by analyzing the creation and composition of the Intellectual Capital embedded in Occupational Health and Safety (OHS) systems. The paper aims to address this relationship. Design/methodology/approach: By drawing a theoretical link for the relationship between OHS activities and intellectual…

  3. 78 FR 30937 - National Advisory Committee on Occupational Safety and Health (NACOSH)

    Science.gov (United States)

    2013-05-23

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2013-0015] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... meeting is open to the public. Section 7(a) of the Occupational Safety and Health Act of 1970 (OSH Act...

  4. The Occupational Safety and Health Act: Implications for School Administration.

    Science.gov (United States)

    Licht, Kenneth F.

    The Occupational Safety and Health Act (1970) concerns private schools but does not directly affect the operations of public schools or colleges. The intent, however, is to have the States develop and administer their own health and safety programs. Administrators should, therefore, initiate a comprehensive, districtwide safety education and…

  5. Health, safety and environmental issues in thin film manufacturing

    NARCIS (Netherlands)

    Alsema, E.A.; Baumann, A.E.; Hill, R.; Patterson, M.H.

    1997-01-01

    An investigation is made of Health, Safety and Environmental (HSE) aspects for the manufacturing, use and decommissioning of CdTe, CIS and a-Si modules. Issues regarding energy requirements, resource availability, emissions of toxic materials, occupational health and safety and module waste

  6. Occupational safety and health: progress toward the 1990 objectives for the nation.

    OpenAIRE

    Millar, J D; Myers, M L

    1983-01-01

    Occupational safety and health is 1 of 15 areas addressed in the Public Health Service's Objectives for the Nation. This area represents 104 million working men and women and the deaths, diseases, and injuries that result from exposures to hazards in their work environment. Characteristics of public health practice are compared with characteristics of occupational safety and health practice. The National Institute for Occupational Safety and Health (NIOSH), created by the Occupational Safety ...

  7. A Survey of Occupational Safety & Health Libraries in the United States.

    Science.gov (United States)

    Jensen, Karen S.

    There is very little published information available about occupational safety and health libraries. This study identified, described, and compared the occupational safety and health libraries in the United States. The questionnaire first filtered out those libraries that did not fit the definition of an occupational safety and health library;…

  8. 77 FR 62536 - National Advisory Committee on Occupational Safety and Health (NACOSH)

    Science.gov (United States)

    2012-10-15

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0019] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... Section 7(a) of the Occupational Safety and Health Act of 1970 (OSH Act) (29 U.S.C. 651, 656) to advise...

  9. Social media in health--what are the safety concerns for health consumers?

    Science.gov (United States)

    Lau, Annie Y S; Gabarron, Elia; Fernandez-Luque, Luis; Armayones, Manuel

    Recent literature has discussed the unintended consequences of clinical information technologies (IT) on patient safety, yet there has been little discussion about the safety concerns in the area of consumer health IT. This paper presents a range of safety concerns for consumers in social media, with a case study on YouTube. We conducted a scan of abstracts on 'quality criteria' related to YouTube. Five areas regarding the safety of YouTube for consumers were identified: (a) harmful health material targeted at consumers (such as inappropriate marketing of tobacco or direct-to-consumer drug advertising); (b) public display of unhealthy behaviour (such as people displaying self-injury behaviours or hurting others); (c) tainted public health messages (i.e. the rise of negative voices against public health messages); (d) psychological impact from accessing inappropriate, offensive or biased social media content; and (e) using social media to distort policy and research funding agendas. The examples presented should contribute to a better understanding about how to promote a safe consumption and production of social media for consumers, and an evidence-based approach to designing social media interventions for health. The potential harm associated with the use of unsafe social media content on the Internet is a major concern. More empirical and theoretical studies are needed to examine how social media influences consumer health decisions, behaviours and outcomes, and devise ways to deter the dissemination of harmful influences in social media.

  10. Functional safety of health information technology.

    LENUS (Irish Health Repository)

    Chadwick, Liam

    2012-03-01

    In an effort to improve patient safety and reduce adverse events, there has been a rapid growth in the utilisation of health information technology (HIT). However, little work has examined the safety of the HIT systems themselves, the methods used in their development or the potential errors they may introduce into existing systems. This article introduces the conventional safety-related systems development standard IEC 61508 to the medical domain. It is proposed that the techniques used in conventional safety-related systems development should be utilised by regulation bodies, healthcare organisations and HIT developers to provide an assurance of safety for HIT systems. In adopting the IEC 61508 methodology for HIT development and integration, inherent problems in the new systems can be identified and corrected during their development. Also, IEC 61508 should be used to develop a healthcare-specific standard to allow stakeholders to provide an assurance of a system\\'s safety.

  11. 29 CFR 1960.80 - Secretary's evaluations of agency occupational safety and health programs.

    Science.gov (United States)

    2010-07-01

    ... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.80 Secretary's evaluations of agency occupational safety and health... evaluating an agency's occupational safety and health program. To accomplish this, the Secretary shall...

  12. Work Health & Safety legislation; the fire engineer’s neglected duty?

    OpenAIRE

    P.A. (Tony) Enright

    2014-01-01

    Fire engineers are in general, aware of their duties under Building legislation. However, they are often unfamiliar of separate duties under Work Health and Safety legislation. This paper describes an Australian case-study, but one that is presented generally so as to have applicability in those other jurisdictions where similar Work Health and Safety obligations exist. As society becomes safer, Work Health and Safety has evolved from being solely about the employer–employee relationshi...

  13. A study for safety and health management problem of semiconductor industry in Taiwan.

    Science.gov (United States)

    Chao, Chin-Jung; Wang, Hui-Ming; Feng, Wen-Yang; Tseng, Feng-Yi

    2008-12-01

    The main purpose of this study is to discuss and explore the safety and health management in semiconductor industry. The researcher practically investigates and interviews the input, process and output of the safety and health management of semiconductor industry by using the questionnaires and the interview method which is developed according to the framework of the OHSAS 18001. The result shows that there are six important factors for the safety and health management in Taiwan semiconductor industry. 1. The company should make employee clearly understand the safety and health laws and standards. 2. The company should make the safety and health management policy known to the public. 3. The company should put emphasis on the pursuance of the safety and health management laws. 4. The company should prevent the accidents. 5. The safety and health message should be communicated sufficiently. 6. The company should consider safety and health norm completely.

  14. Integrating safety and health during deactiviation: With lessons learned from PUREX

    International Nuclear Information System (INIS)

    1995-01-01

    This report summarizes an integrated safety and health approach used during facility deactivation activities at the Department of Energy (DOE) Plutonium-Uranium Extraction (PUREX) Facility in Hanford, Washington. Resulting safety and health improvements and the potential, complex-wide application of this approach are discussed in this report through a description of its components and the impacts, or lessons-learned, of its use during the PUREX deactivation project. As a means of developing and implementing the integrated safety and health approach, the PUREX technical partnership was established in 1993 among the Office of Environment, Safety and Health's Office of Worker Health and Safety (EH-5); the Office of Environmental Management's Offices of Nuclear Material and Facility Stabilization (EM-60) and Compliance and Program Coordination (EM-20); the DOE Richland Operations Office; and the Westinghouse Hanford Company. It is believed that this report will provide guidance for instituting an integrated safety and health approach not only for deactivation activities, but for decommissioning and other clean-up activities as well. This confidence is based largely upon the rationality of the approach, often termed as common sense, and the measurable safety and health and project performance results that application of the approach produced during actual deactivation work at the PUREX Facility

  15. DOE'S award fees at Rocky Flats do not adequately reflect ES and H problems

    International Nuclear Information System (INIS)

    1989-10-01

    Despite the persistance of significant environmental, safety, and health problems at the Rocky Flats plant, it's contractor has received substantial monetary awards from the Department of Energy for operating the plant. During fiscal years 1986 through 1988, approximately $26.8 million was received in award fees - about 84 percent of the total award fees that were available under the contract with DOE. This report identified a number of problems that raise concerns about how the award process is being administered: significant ES and H deficiencies have been downplayed in the evaluation process; the process has placed more emphasis on production rather than on ES and H performance; and the evaluations have not been reviewed by DOE headquarters organizations that have important roles in the conduct of activities. This report recommends that DOE restructure its award fee process to provide a clear understanding to its contractors what they will be losing in award fees for certain types of ES and H problems

  16. Radiological Emergency Response Health and Safety Manual

    Energy Technology Data Exchange (ETDEWEB)

    D. R. Bowman

    2001-05-01

    This manual was created to provide health and safety (H&S) guidance for emergency response operations. The manual is organized in sections that define each aspect of H and S Management for emergency responses. The sections are as follows: Responsibilities; Health Physics; Industrial Hygiene; Safety; Environmental Compliance; Medical; and Record Maintenance. Each section gives guidance on the types of training expected for managers and responders, safety processes and procedures to be followed when performing work, and what is expected of managers and participants. Also included are generic forms that will be used to facilitate or document activities during an emergency response. These ensure consistency in creating useful real-time and archival records and help to prevent the loss or omission of information.

  17. Integrating Occupational Health and Safety into TAFE Courses: Curriculum Topics.

    Science.gov (United States)

    Hall, Bob; Mageean, Pauline

    This guide is designed to help technical and further education (TAFE) curriculum writers in Australia integrate safety education into vocational education courses. It provides a general overview of occupational health and safety from the perspective of TAFE trade training and a brief summary of the major health and safety issues that might be…

  18. Evaluating Performance of Safety Management and Occupational Health Using Total Quality Safety Management Model (TQSM

    Directory of Open Access Journals (Sweden)

    E Mohammadfam

    2015-11-01

    Full Text Available Introduction: All organizations, whether public or private, necessitate performance evaluation systems in regard with growth, stability, and development in the competitive fields. One of the existing models for performance evaluation of occupational health and safety management is Total Quality Safety Management model (TQSM. Therefore, the present study aimed to evaluate performance of safety management and occupational health utilizing TQSM model. Methods: In this descriptive-analytic study, the population consisted of 16 individuals, including managers, supervisors, and members of technical protection and work health committee. Then the participants were asked to respond to TQSM questionnaire before and after the implementation of Occupational Health & Safety Advisory Services 18001 (OHSAS18001. Ultimately, the level of each program as well as the TQSM status were determined before and after the implementation of OHSAS18001. Results: The study results showed that the scores obtained by the company before OHSAS 18001’s implementation, was 43.7 out of 312. After implementing OHSAS 18001 in the company and receiving the related certificate, the total score of safety program that company could obtain was 127.12 out of 312 demonstrating a rise of 83.42 scores (26.8%. The paired t-test revealed that mean difference of TQSM scores before and after OHSAS 18001 implementation was proved to be significant (p> 0.05. Conclusion: The study findings demonstrated that TQSM can be regarded as an appropriate model in order to monitor the performance of safety management system and occupational health, since it possesses the ability to quantitatively evaluate the system performance.

  19. 29 CFR 1960.79 - Self-evaluations of occupational safety and health programs.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Self-evaluations of occupational safety and health programs. 1960.79 Section 1960.79 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs...

  20. Simplifying documentation while approaching site closure: integrated health and safety plans as documented safety analysis

    International Nuclear Information System (INIS)

    Brown, Tulanda

    2003-01-01

    At the Fernald Closure Project (FCP) near Cincinnati, Ohio, environmental restoration activities are supported by Documented Safety Analyses (DSAs) that combine the required project-specific Health and Safety Plans, Safety Basis Requirements (SBRs), and Process Requirements (PRs) into single Integrated Health and Safety Plans (I-HASPs). By isolating any remediation activities that deal with Enriched Restricted Materials, the SBRs and PRs assure that the hazard categories of former nuclear facilities undergoing remediation remain less than Nuclear. These integrated DSAs employ Integrated Safety Management methodology in support of simplified restoration and remediation activities that, so far, have resulted in the decontamination and demolition (D and D) of over 150 structures, including six major nuclear production plants. This paper presents the FCP method for maintaining safety basis documentation, using the D and D I-HASP as an example

  1. A new standard for multidisciplinary health and safety technicians

    International Nuclear Information System (INIS)

    Trinoskey, P.A.; Fry, L.A.; Egbert, W.F.

    2000-01-01

    Over the last two decades, a significant trend in health and safety has been toward greater specialization. However, compartmentalization of health and safety disciplines often leads to an inequity in resources, especially when appropriations overemphasize one risk to the detriment of others. For example, overemphasis on radiological safety can create an imbalance in overall worker protection. A multidisciplinary technical can help restore the balance and provide for a healthier and safer work environment. The key advantages of a multidisciplinary health and safety technician include: Broad coverage of the work area by one technician, More diverse use of the technician pool, Better coverage for off-shift or nonstandard hours, Balance of risks because all hazards are considered, Integrated emergency response, Ownership, Less time of identify the correct person with the requisite skills. We have developed a new standard that establishes the training and related qualifications for a multidisciplinary health and safety technician. The areas of training and qualification that are addressed include elements of industrial hygiene, industrial safety, fire protection, electrical safety, construction safety, and radiation safety. The initial core training program ensures that individuals are trained to the performance of requirements of the job. Initial training is in five areas: Fundamentals, Hazard recognition, Hazard assessment, Hazards controls, Hazards minimization. Core training is followed by formal qualification on specific tasks, including ventilation surveys, air monitoring, noise assessments, radiological monitoring, area inspections, work-area setups, and work coverage. The new standard addresses not only training topics and requirements, but also guidance to ensure that performance objectives are met. The standard applies to technicians, supervisors, technologists, and six specialty areas, including academic institutions and decontamination and decommissioning

  2. A new standard for multidisciplinary health and safety technicians

    Energy Technology Data Exchange (ETDEWEB)

    Trinoskey, P.A.; Fry, L.A. [Lawrence Livermore National Laboratory, Univ. of California, CA (United States); Egbert, W.F. [Lawrence Livermore National Laboratory, Allied Signal Technical Corporation (United States)

    2000-05-01

    Over the last two decades, a significant trend in health and safety has been toward greater specialization. However, compartmentalization of health and safety disciplines often leads to an inequity in resources, especially when appropriations overemphasize one risk to the detriment of others. For example, overemphasis on radiological safety can create an imbalance in overall worker protection. A multidisciplinary technical can help restore the balance and provide for a healthier and safer work environment. The key advantages of a multidisciplinary health and safety technician include: Broad coverage of the work area by one technician, More diverse use of the technician pool, Better coverage for off-shift or nonstandard hours, Balance of risks because all hazards are considered, Integrated emergency response, Ownership, Less time of identify the correct person with the requisite skills. We have developed a new standard that establishes the training and related qualifications for a multidisciplinary health and safety technician. The areas of training and qualification that are addressed include elements of industrial hygiene, industrial safety, fire protection, electrical safety, construction safety, and radiation safety. The initial core training program ensures that individuals are trained to the performance of requirements of the job. Initial training is in five areas: Fundamentals, Hazard recognition, Hazard assessment, Hazards controls, Hazards minimization. Core training is followed by formal qualification on specific tasks, including ventilation surveys, air monitoring, noise assessments, radiological monitoring, area inspections, work-area setups, and work coverage. The new standard addresses not only training topics and requirements, but also guidance to ensure that performance objectives are met. The standard applies to technicians, supervisors, technologists, and six specialty areas, including academic institutions and decontamination and decommissioning

  3. World Day for Safety and Health at Work

    CERN Multimedia

    2012-01-01

    27 April is World Day for Safety and Health at Work.   CERN’s health and safety teams look forward to seeing you at their stands in each of the three restaurants. This year, we cast the spotlight on two topics: • ergonomics • electrical hazards. Come and get tips that will help you to ensure your safety and to stay healthy and, you never know, you might be lucky enough to win a nice prize. Don't forget, Friday, 27 April 2012 from 11:30 a.m. to 2:30 p.m. in your nearest restaurant!

  4. [Concept analysis of a participatory approach to occupational safety and health].

    Science.gov (United States)

    Yoshikawa, Etsuko

    2013-01-01

    The purpose of this study was to analyze a participatory approach to occupational safety and health, and to examine the possibility of applying the concept to the practice and research of occupational safety and health. According to Rodger's method, descriptive data concerning antecedents, attributes and consequences were qualitatively analyzed. A total of 39 articles were selected for analysis. Attributes with a participatory approach were: "active involvement of both workers and employers", "focusing on action-oriented low-cost and multiple area improvements based on good practices", "the process of emphasis on consensus building", and "utilization of a local network". Antecedents of the participatory approach were classified as: "existing risks at the workplace", "difficulty of occupational safety and health activities", "characteristics of the workplace and workers", and "needs for the workplace". The derived consequences were: "promoting occupational safety and health activities", "emphasis of self-management", "creation of safety and healthy workplace", and "contributing to promotion of quality of life and productivity". A participatory approach in occupational safety and health is defined as, the process of emphasis on consensus building to promote occupational safety and health activities with emphasis on self-management, which focuses on action-oriented low-cost and multiple area improvements based on good practices with active involvement of both workers and employers through utilization of local networks. We recommend that the role of the occupational health professional be clarified and an evaluation framework be established for the participatory approach to promote occupational safety and health activities by involving both workers and employers.

  5. Health and Safety Management for Small-scale Methane Fermentation Facilities

    Science.gov (United States)

    Yamaoka, Masaru; Yuyama, Yoshito; Nakamura, Masato; Oritate, Fumiko

    In this study, we considered health and safety management for small-scale methane fermentation facilities that treat 2-5 ton of biomass daily based on several years operation experience with an approximate capacity of 5 t·d-1. We also took account of existing knowledge, related laws and regulations. There are no qualifications or licenses required for management and operation of small-scale methane fermentation facilities, even though rural sewerage facilities with a relative similar function are required to obtain a legitimate license. Therefore, there are wide variations in health and safety consciousness of the operators of small-scale methane fermentation facilities. The industrial safety and health laws are not applied to the operation of small-scale methane fermentation facilities. However, in order to safely operate a small-scale methane fermentation facility, the occupational safety and health management system that the law recommends should be applied. The aims of this paper are to clarify the risk factors in small-scale methane fermentation facilities and encourage planning, design and operation of facilities based on health and safety management.

  6. Status of occupational health and safety in Iran.

    Science.gov (United States)

    Vigeh, Mohsen; Mazaheri, Maria; Seyedaghamiri, Zahrabigom

    2011-12-01

    In recent decades, Iran has had a steadily growing economy with an annual rate of 6% on average. The country's economy is dominantly influenced by oil and natural gas production and related industries like petrochemicals and fertilizers. There are two million job units and sixteen million employees. The occupational health and safety (OHS) system is mainly regulated by two bodies: the Ministry of Health and Medical Education, responsible for occupational health services and legislations; and the Ministry of Labour and Social Affairs, which undertakes the enactment and enforcement of occupational safety legal issues. Inspectorates in each ministry carry out regular health and safety monitoring according to the OHS legislations. The most common occupational health disorders are musculoskeletal problems, respiratory diseases, noise induced hearing loss, and occupational injuries. Because the OHS is a complex system with overlapping responsibilities among the co-responders, its improvement needs well-organized collaboration among Iranian universities, industries, and governmental agencies, and reliable basic data. The present study takes a glance at the situation and activities of the Iranian OHS system.

  7. How good is BNFL's health and safety?

    International Nuclear Information System (INIS)

    Berry, R.J.; Coulston, D.J.

    1989-01-01

    A historical perspective of the development of health and safety philosophy and practice within the nuclear industry is followed by a description of the Company's safety management system. This involves three elements, policy, implementation and audit. Data given on discharges to the environment and occupational dose. (U.K.)

  8. Plutonium working group report on environmental, safety and health vulnerabilities associated with the department's plutonium storage. Volume II, part 9, Oak Ridge Site working group assessment team report

    International Nuclear Information System (INIS)

    1994-09-01

    The objective of the Plutonium Environmental Safety and Health (ES ampersand H) Vulnerability Assessment at the Oak Ridge (OR) Site was to conduct a comprehensive assessment of the ES ampersand H vulnerabilities arising from the storage and handling of its current plutonium holdings. The term open-quotes ES ampersand H Vulnerabilityclose quotes is defined for the purpose of this project to mean conditions or weaknesses that could lead to unnecessary or increased radiation exposure of workers, release of radioactive materials to the environment, or radiation exposure to the public. This assessment was intended to take a open-quotes snap-shotclose quotes of Oak Ridge National Laboratory (ORNL) and the Y-12 Plant's plutonium holdings and associated ES ampersand H vulnerabilities in the time frame of June 1 994. This vulnerability assessment process began with the OR Site Assessment Team (SAT) generating a self-assessment report including proposed vulnerabilities. The SAT identified 55 facilities which contain plutonium and other transuranics they considered might be in-scope for purposes of this study. The Working Group Assessment Team (WGAT), however, determined that 37 of the facilities actually contained only out-of-scope material (e.g., transuranic material not colocated with plutonium or transuranic (TRU) waste). The WGAT performed an independent assessment of the SATs report, conducted facility walkdowns, and reviewed reference documents such as Safety Analysis Reports (SARs), Operational Safety Requirements (OSRs), emergency preparedness plans, and procedures. The results of the WGAT review and open-quotes walkdownsclose quotes (a term as used here incorporating tours, document reviews, and detailed discussions with cognizant personnel) are discussed in Section 3.0. The ES ampersand H vulnerabilities that were identified are documented in Appendix A

  9. Environment, health and safety progress report 1997

    International Nuclear Information System (INIS)

    1998-01-01

    Imperial Oil is Canada's largest producer of crude oil and a major producer of natural gas. It is also the largest refiner and marketer of petroleum products, sold mainly under the Esso brand. Imperial Oil, in participation with Syncrude Canada, is also a major developer of the oil sands reserves in Cold Lake, Alberta. This review of environmental and health and safety performance in 1997 highlights the Company's comprehensive approach to risk management to reduce risk to safety, health and the environment. It is noted that in 1997, the Company's employee and contractor safety performance continued to be among the best in the industry. Potentially hazardous incidents decreased as a consequence of Imperial Oil's more stringent health and safety management system. Environmental compliance notifications fell by more than half in 1997. During the year there was a slight increase in hazardous wastes, due to the loss of outlets for recycling some materials. The National Pollutants Release Inventory indicates that Imperial has reduced emissions and offsite transfers by 25 per cent since 1993. Volatile organic compounds have been reduced by 60 per cent since 1993. According to the report all Imperial Oil facilities operate well within the guidelines for sulphur dioxide emissions. 1 tab., 10 figs

  10. Zagazig Journal of Occupational Health and Safety: About this journal

    African Journals Online (AJOL)

    Zagazig Journal of Occupational Health and Safety: About this journal. Journal Home > Zagazig Journal of Occupational Health and Safety: About this journal. Log in or Register to get access to full text downloads.

  11. Integrated environment, safety, and health management system description

    International Nuclear Information System (INIS)

    Zoghbi, J. G.

    2000-01-01

    The Integrated Environment, Safety, and Health Management System Description that is presented in this document describes the approach and management systems used to address integrated safety management within the Richland Environmental Restoration Project

  12. Environment, Health, and Safety | NREL

    Science.gov (United States)

    -Wide Environmental Assessment 2014 (DOE/EA-1914). Final EA and FONSI Appendices. Natural and Cultural property, and the environment. View the Environmental Stewardship, Health, Safety, and Quality Management Environmental Assessment 2014. Final EA and FONSI Appendices. Download the National Wind Technology Center Site

  13. Zagazig Journal of Occupational Health and Safety: Editorial Policies

    African Journals Online (AJOL)

    Focus and Scope. Zagazig Journal of Occupational Health and Safety is aimed at physicians and researchers in the wide-ranging discipline of occupational and ... The main objectives of Zagazig Journal of Occupational Health and Safety are to publish high quality scientific articles , to maximize the citation rate of the ...

  14. 48 CFR 923.7002 - Worker safety and health.

    Science.gov (United States)

    2010-10-01

    ... Information and Protection of Worker Safety and Health” or “952.223-77, Conditional Payment of Fee or Profit—Protection of Worker Safety and Health” implement the requirements of section 234C of the Atomic Energy Act... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Worker safety and health...

  15. Oak Ridge National Laboratory Health and Safety Long-Range Plan: Fiscal years 1989--1995

    Energy Technology Data Exchange (ETDEWEB)

    1989-06-01

    The health and safety of its personnel is the first concern of ORNL and its management. The ORNL Health and Safety Program has the responsibility for ensuring the health and safety of all individuals assigned to ORNL activities. This document outlines the principal aspects of the ORNL Health and Safety Long-Range Plan and provides a framework for management use in the future development of the health and safety program. Each section of this document is dedicated to one of the health and safety functions (i.e., health physics, industrial hygiene, occupational medicine, industrial safety, nuclear criticality safety, nuclear facility safety, transportation safety, fire protection, and emergency preparedness). Each section includes functional mission and objectives, program requirements and status, a summary of program needs, and program data and funding summary. Highlights of FY 1988 are included.

  16. Oak Ridge National Laboratory Health and Safety Long-Range Plan: Fiscal years 1989--1995

    International Nuclear Information System (INIS)

    1989-06-01

    The health and safety of its personnel is the first concern of ORNL and its management. The ORNL Health and Safety Program has the responsibility for ensuring the health and safety of all individuals assigned to ORNL activities. This document outlines the principal aspects of the ORNL Health and Safety Long-Range Plan and provides a framework for management use in the future development of the health and safety program. Each section of this document is dedicated to one of the health and safety functions (i.e., health physics, industrial hygiene, occupational medicine, industrial safety, nuclear criticality safety, nuclear facility safety, transportation safety, fire protection, and emergency preparedness). Each section includes functional mission and objectives, program requirements and status, a summary of program needs, and program data and funding summary. Highlights of FY 1988 are included

  17. THE SCHOOL HEALTH AND SAFETY PROGRAM.

    Science.gov (United States)

    1963

    INVOLVING INDIVIDUALS AS WELL AS ORGANIZATIONS, THE PROGRAM AIMED AT THE OPTIMUM HEALTH OF ALL CHILDREN, AND IMPROVEMENT OF HEALTH AND SAFETY STANDARDS WITHIN THE COMMUNITY. EACH OF THE CHILDREN WAS URGED TO HAVE A SUCCESSFUL VACCINATION FOR SMALL POX, THE DPT SERIES AND BOOSTER, THE POLIO SERIES, AND CORRECTIONS OF ALL DENTAL DEFECTS AND…

  18. Proceedings of The First National Seminar on Safety, Public Health and Environment

    International Nuclear Information System (INIS)

    Hiswara, Eri; Bunawas; Dumais, Johannes P.; Alatas, Zubaidah; Melyani

    2001-11-01

    The first national seminar of safety, public health and environment was held in 23-24 Oct 2001 at the center for research and development of radiation safety and nuclear biomedicine natural energy agency, Indonesia have presented 27 papers, about safety, public health and environment the proceedings is expected to give illustration of the research result on safety, health and environment. (PPIN)

  19. Safety and health in the petrochemical industry in Map Ta Phut, Thailand.

    Science.gov (United States)

    Langkulsen, Uma; Vichit-Vadakan, Nuntavarn; Taptagaporn, Sasitorn

    2011-01-01

    Petrochemical industries are known as sources of many toxic chemicals. Safety and health risks of the petrochemical workers employed at Map Ta Phut Industrial Estate, located in Rayong, Thailand, are potentially high. The research materials consisted of documents emanating from statutory reports on safety in working with toxic chemicals and the results of interviews by questionnaire among 457 petrochemical workers regarding occupational health and safety issues. Most of workers who were working with toxic chemicals had knowledge and awareness of health risks and chemical hazards at work. We found that safe behavior at work through read the safety information among operational workers less than non-operational workers around 10%. Most of workers had perceived occupational health and safety management in their companies. Some companies revealed that they had not been performing biological monitoring of blood or urine for their health examination reports and that workplace exposure monitoring had not correlated well with health examination of workers. Our study suggested that occupational health and safety for petrochemical industries requires standards and guidelines for workers' health surveillance aimed at protection of workers.

  20. United States import safety, environmental health, and food safety regulation in China.

    Science.gov (United States)

    Nyambok, Edward O; Kastner, Justin J

    2012-01-01

    China boasts a rapidly growing economy and is a leading food exporter. Since China has dominated world export markets in food, electronics, and toys, many safety concerns about Chinese exports have emerged. For example, many countries have had problems with Chinese food products and food-processing ingredients. Factors behind food safety and environmental health problems in China include poor industrial waste management, the use of counterfeit agricultural inputs, inadequate training of farmers on good farm management practices, and weak food safety laws and poor enforcement. In the face of rising import safety problems, the U.S. is now requiring certification of products and foreign importers, pursuing providing incentives to importers who uphold good safety practices, and considering publicizing the names of certified importers.

  1. Revised health and safety compliance model for the Ghanaian ...

    African Journals Online (AJOL)

    The construction industry in Ghana is faced with employees' negligence in obeying rules and regulations, and acts that conflict with health and safety. The purpose of the paper was to present the revised health and safety (H&S) compliance model for the construction industry based on a developed theoretical six factor ...

  2. 78 FR 11092 - Safety and Health Regulations for Construction

    Science.gov (United States)

    2013-02-15

    ... LABOR DEPARTMENT Occupational Safety and Health Administration 29 CFR Part 1926 Safety and Health Regulations for Construction CFR Correction In Title 29 of the Code of Federal Regulations, Part 1926, revised as of July 1, 2012, on page 225, in Sec. 1926.152, paragraph (c)(16) is added to read as follows: Sec...

  3. Environmental Safety and Health Analytical Laboratory, Pantex Plant, Amarillo, Texas. Final Environmental Assessment

    International Nuclear Information System (INIS)

    1995-06-01

    The US Department of Energy (DOE) has prepared an Environmental Assessment (EA) of the construction and operation of an Environmental Safety and Health (ES ampersand H) Analytical Laboratory and subsequent demolition of the existing Analytical Chemistry Laboratory building at Pantex Plant near Amarillo, Texas. In accordance with the Council on Environmental Quality requirements contained in 40 CFR 1500--1508.9, the Environmental Assessment examined the environmental impacts of the Proposed Action and discussed potential alternatives. Based on the analysis of impacts in the EA, conducting the proposed action, construction of an analytical laboratory and demolition of the existing facility, would not significantly effect the quality of the human environment within the meaning of the National Environmental Policy Act of 1969 (NEPA) and the Council on Environmental Quality regulations in 40 CFR 1508.18 and 1508.27

  4. Occupational exposure and health problems in small-scale industry workers in Dar es Salaam, Tanzania: a situation analysis.

    NARCIS (Netherlands)

    Rongo, L.M.B.; Barten, F.J.M.H.; Msamanga, G.I.; Heederik, D.; Dolmans, W.M.V.

    2004-01-01

    BACKGROUND: Workers in informal small-scale industries (SSI) in developing countries involved in welding, spray painting, woodwork and metalwork are exposed to various hazards with consequent risk to health. Aim To assess occupational exposure and health problems in SSI in Dar es Salaam, Tanzania.

  5. Translating Health Services Research into Practice in the Safety Net.

    Science.gov (United States)

    Moore, Susan L; Fischer, Ilana; Havranek, Edward P

    2016-02-01

    To summarize research relating to health services research translation in the safety net through analysis of the literature and case study of a safety net system. Literature review and key informant interviews at an integrated safety net hospital. This paper describes the results of a comprehensive literature review of translational science literature as applied to health care paired with qualitative analysis of five key informant interviews conducted with senior-level management at Denver Health and Hospital Authority. Results from the literature suggest that implementing innovation may be more difficult in the safety net due to multiple factors, including financial and organizational constraints. Results from key informant interviews confirmed the reality of financial barriers to innovation implementation but also implied that factors, including institutional respect for data, organizational attitudes, and leadership support, could compensate for disadvantages. Translating research into practice is of critical importance to safety net providers, which are under increased pressure to improve patient care and satisfaction. Results suggest that translational research done in the safety net can better illuminate the special challenges of this setting; more such research is needed. © Health Research and Educational Trust.

  6. 29 CFR 1960.12 - Dissemination of occupational safety and health program information.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Dissemination of occupational safety and health program... OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Administration § 1960.12 Dissemination of occupational safety and health program information. (a) Copies of the Act, Executive Order 12196, program...

  7. New Possibilities for development of the internal health and safety organisation

    DEFF Research Database (Denmark)

    Hasle, Peter; Jensen, Per Langå

    2004-01-01

    Research from several countries indicates that the internal health and safety organisation in most companies is placed in an appendix position. A possibility for developing a stronger and more effective health and safety organisation is to introduce learning. This approach has been applied...... in a Danish network project with eleven companies. The results indicate that health and safety managers and safety representatives have difficulties in fulfilling the role as change agents in mastering such a development project. Only three of the eleven companies turned out to be able to implement successful...

  8. Recognizing Job Health Hazards. Module SH-08. Safety and Health.

    Science.gov (United States)

    Center for Occupational Research and Development, Inc., Waco, TX.

    This student module on recognizing job health hazards is one of 50 modules concerned with job safety and health. This module presents the four general categories of environmental conditions or stresses: chemical, physical, biological, and ergonomic. Following the introduction, 14 objectives (each keyed to a page in the text) the student is…

  9. Occupational safety and health law handbook

    Energy Technology Data Exchange (ETDEWEB)

    Sarvadi, D.G. [ed.; Keller; Heckman

    1999-09-01

    This book reviews the regulations and standards governing the protection of employees in the workplace and provides insight into dealing with pertinent regulations and regulatory authorities. Written for safety professionals, industrial hygienists, human resource professionals, attorneys, and students, this companion to Government Institutes' best-selling ``Environmental Law Handbook'' offers the legal fundamentals behind occupational safety and health laws in one concise and authoritative volume. In 19 chapters, the authoring law firm of Keller and Heckman cover the OSHAct and its development; OSHA, NIOSH, and OSHRC; the roles played by other regulatory agencies; the OSHA rulemaking process; OSHA Standards and the General Duty Clause; record keeping and reporting; employers' and employees' rights; inspections; violations, penalties, and how to contest them; criminal prosecutions; state plans; industry-specific issues; OSHA reform; and international regulations and standards. This book references approximately 400 seminal OSHA legal decisions from the approximately 1,300 cases on record and includes coverage of Canadian and European Community regulations, making it the first comprehensive global overview of occupational safety and health law.

  10. 29 CFR 1912.5 - National Advisory Committee on Occupational Safety and Health.

    Science.gov (United States)

    2010-07-01

    ... Health. 1912.5 Section 1912.5 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND... Matters § 1912.5 National Advisory Committee on Occupational Safety and Health. (a) Section 7(a) of the Act established a National Advisory Committee on Occupational Safety and Health. The Committee is to...

  11. OCCUPATIONAL HEALTH AND SAFETY ACT NO.6331 AND TOXICOLOGY

    OpenAIRE

    AYAN, Burak

    2018-01-01

    Workers exposureto variety of hazardous chemicals related to the type of work carried out. Regulationsabout chemicals which may be unsafe for workers is regulated at theOccupational Health and Safety Act No.6331.In this review regulatory framework of occupational health and safety forchemicals are assessed in order for chemicals to be used properly andsafely. 

  12. Health and Safety Management Plan for the Plutonium Stabilization and Packaging System

    International Nuclear Information System (INIS)

    1996-01-01

    This Health and Safety Management Plan (HSMP) presents safety and health policies and a project health and safety organizational structure designed to minimize potential risks of harm to personnel performing activities associated with Plutonium Stabilization and Packaging System (Pu SPS). The objectives of the Pu SPS are to design, fabricate, install, and startup of a glovebox system for the safe repackaging of plutonium oxides and metals, with a requirement of a 50-year storage period. This HSMP is intended as an initial project health and safety submittal as part of a three phase effort to address health and safety issues related to personnel working the Pu SPS project. Phase 1 includes this HSMP and sets up the basic approach to health and safety on the project and addresses health and safety issues related to the engineering and design effort. Phase 2 will include the Site Specific Construction health and Safety Plan (SSCHSP). Phase 3 will include an additional addendum to this HSMP and address health and safety issues associated with the start up and on-site test phase of the project. This initial submittal of the HSMP is intended to address those activities anticipated to be performed during phase 1 of the project. This HSMP is intended to be a living document which shall be modified as information regarding the individual tasks associated with the project becomes available. These modifications will be in the form of addenda to be submitted prior to the initiation of each phase of the project. For additional work authorized under this project this HSMP will be modified as described in section 1.4

  13. Occupational safety and health management among five ASEAN countries: Thailand, Indonesia, Malaysia, Philippines, and Singapore.

    Science.gov (United States)

    Buranatrevedh, Surasak

    2015-03-01

    Occupational safety and health is one of important issues for workforce movement among ASEAN countries. The objective was to study laws, main agencies, and law enforcement regarding occupational safety and health in Thailand, Indonesia, Malaysia, Philippines, and Singapore. This documentary research covered laws, main agencies' duties, and occupational safety and health law enforcement in Thailand, Indonesia, Malaysia, Philippines, and Singapore. Thailand has its Occupational Safety, Health, and Work EnvironmentAct 2011. Its main agency was Department of Labor Protection and Welfare. Indonesia had WorkSafety Act (Law No. 1, 1970). Its main agency was Department of Manpower and Transmigration. Malaysia had Occupational Safety and Health Act (OSHA) 1994. Its main agency is the Department of Occupational Safety and Health. The Philippines has its Occupational Safety and Health Standards. Its main agency was Department ofLabor and Employment. Singapore has its Workplace Safety and Health Act 2006. Its main agency is Occupational Safety and Health Division. Occupational safety and health law enforcement among each county covers work environment surveillance, workers' health surveillance, advice about prevention and control of occupational health hazards, training and education of employers and employees, data systems, and research. Further in-depth surveys of occupational safety and health among each ASEAN county are needed to develop frameworks for occupational safety and health management for all ASEAN countries.

  14. Occupational Health and Safety Management and Turnover Intention in the Ghanaian Mining Sector.

    Science.gov (United States)

    Amponsah-Tawiah, Kwesi; Ntow, Michael Akomeah Ofori; Mensah, Justice

    2016-03-01

    The mining industry is considered as one of the most dangerous and hazardous industries and the need for effective and efficient occupational health and safety management is critical to safeguard workers and the industry. Despite the dangers and hazards present in the mining industry, only few studies have focused on how occupational health and safety and turnover intentions in the mines. The study suing a cross-sectional survey design collected quantitative data from the 255 mine workers that were conveniently sampled from the Ghanaian mining industry. The data collection tools were standardized questionnaires that measured occupational health and safety management and turnover intentions. These scales were also pretested before their usage in actual data collection. The correlation coefficient showed that a negative relationship existed between dimensions of occupational health and safety management and turnover intention; safety leadership (r = -0.33, p safety facilities and equipment (r = -0.32, p safety procedure (r = -0.27, p safety leadership and safety facility were significant predictors of turnover intention, (β = -0.28, p safety leadership in ensuring the effective formulation of policies and supervision of occupational health and safety at the workplace. The present study demonstrates that safety leadership is crucial in the administration of occupational health and safety and reducing turnover intention in organizations.

  15. Developing the health, safety and environment excellence instrument.

    Science.gov (United States)

    Mohammadfam, Iraj; Saraji, Gebraeil Nasl; Kianfar, Ali; Mahmoudi, Shahram

    2013-01-07

    Quality and efficiency are important issues in management systems. To increase quality, to reach best results, to move towards the continuous improvement of system and also to make the internal and external customers satisfied, it is necessary to consider the system performance measurement. In this study the Health, Safety and Environment Excellence Instrument was represented as a performance measurement tool for a wide range of health, safety and environment management systems. In this article the development of the instrument overall structure, its parts, and its test results in three organizations are presented. According to the results, the scores ranking was the managership organization, the manufacturing company and the powerhouse construction project, respectively. The results of the instrument test in three organizations show that, on the whole, the instrument has the ability to measure the performance of health, safety and environment management systems in a wide range of organizations.

  16. Implementing 10 CFR 830 at the FEMP Silos: Nuclear Health and Safety Plans as Documented Safety Analysis

    International Nuclear Information System (INIS)

    Fisk, Patricia; Rutherford, Lavon

    2003-01-01

    The objective of the Silos Project at the Fernald Closure Project (FCP) is to safely remediate high-grade uranium ore residues (Silos 1 and 2) and metal oxide residues (Silo 3). The evolution of Documented Safety Analyses (DSAs) for these facilities has reflected the changes in remediation processes. The final stage in silos DSAs is an interpretation of 10 CFR 830 Safe Harbor Requirements that combines a Health and Safety Plan with nuclear safety requirements. This paper will address the development of a Nuclear Health and Safety Plan, or N-HASP

  17. Twenty sixth DAE safety and occupational health professionals meet: cryogenic safety, electrical safety and ergonomics at work place

    International Nuclear Information System (INIS)

    2009-01-01

    This conference gathered knowledge in safety and occupational health hazards in various fields of nuclear science and technology like radiations, high voltages, ultra-low temperature, ultra-high magnetic fields, electrical breakdown, fire, ergonomics and cryogenic safety at work place. Papers relevant to INIS database are indexed separately

  18. Software for the occupational health and safety integrated management system

    International Nuclear Information System (INIS)

    Vătăsescu, Mihaela

    2015-01-01

    This paper intends to present the design and the production of a software for the Occupational Health and Safety Integrated Management System with the view to a rapid drawing up of the system documents in the field of occupational health and safety

  19. Software for the occupational health and safety integrated management system

    Energy Technology Data Exchange (ETDEWEB)

    Vătăsescu, Mihaela [University Politehnica Timisoara, Department of Engineering and Management, 5 Revolutiei street, 331128 Hunedoara (Romania)

    2015-03-10

    This paper intends to present the design and the production of a software for the Occupational Health and Safety Integrated Management System with the view to a rapid drawing up of the system documents in the field of occupational health and safety.

  20. Use of the Home Safety Self-Assessment Tool (HSSAT) within Community Health Education to Improve Home Safety.

    Science.gov (United States)

    Horowitz, Beverly P; Almonte, Tiffany; Vasil, Andrea

    2016-10-01

    This exploratory research examined the benefits of a health education program utilizing the Home Safety Self-Assessment Tool (HSSAT) to increase perceived knowledge of home safety, recognition of unsafe activities, ability to safely perform activities, and develop home safety plans of 47 older adults. Focus groups in two senior centers explored social workers' perspectives on use of the HSSAT in community practice. Results for the health education program found significant differences between reported knowledge of home safety (p = .02), ability to recognize unsafe activities (p = .01), safely perform activities (p = .04), and develop a safety plan (p = .002). Social workers identified home safety as a major concern and the HSSAT a promising assessment tool. Research has implications for reducing environmental fall risks.

  1. 77 FR 43090 - Safety and Occupational Health Study Section: Notice of Charter Renewal

    Science.gov (United States)

    2012-07-23

    ... Committee Act (Pub. L. 92-463) of October 6, 1972, that the Safety and Occupational Health Study Section... Secretary, Safety and Occupational Health Study Section, Department of Health and Human Services, 1600... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Safety and...

  2. 75 FR 42455 - Safety and Occupational Health Study Section: Notice of Charter Renewal

    Science.gov (United States)

    2010-07-21

    ... Committee Act (Pub. L. 92-463) of October 6, 1972, that the Safety and Occupational Health Study Section... Secretary, Safety and Occupational Health Study Section, Department of Health and Human Services, 1600... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Safety and...

  3. What is Clinical Safety in Electronic Health Care Record Systems?

    Science.gov (United States)

    Davies, George

    There is mounting public awareness of an increasing number of adverse clinical incidents within the National Health Service (NHS), but at the same time, large health care projects like the National Programme for IT (NPFIT) are claiming that safer care is one of the benefits of the project and that health software systems in particular have the potential to reduce the likelihood of accidental or unintentional harm to patients. This paper outlines the approach to clinical safety management taken by CSC, a major supplier to NPFIT; discusses acceptable levels of risk and clinical safety as an end-to-end concept; and touches on the future for clinical safety in health systems software.

  4. Occupational health and safety among commercial sex workers.

    Science.gov (United States)

    Ross, Michael W; Crisp, Beth R; Månsson, Sven-Axel; Hawkes, Sarah

    2012-03-01

    The concept of occupational health and safety (OHS) for commercial sex workers has rarely been investigated, perhaps because of the often informal nature of the workplace, the associated stigma, and the frequently illegal nature of the activity. We reviewed the literature on health, occupational risks, and safety among commercial sex workers. Cultural and local variations and commonalities were identified. Dimensions of OHS that emerged included legal and policing risks, risks associated with particular business settings such as streets and brothels, violence from clients, mental health risks and protective factors, alcohol and drug use, repetitive strain injuries, sexually transmissible infections, risks associated with particular classes of clients, issues associated with male and transgender commercial sex workers, and issues of risk reduction that in many cases are associated with lack of agency or control, stigma, and legal barriers. We further discuss the impact and potential of OHS interventions for commercial sex workers. The OHS of commercial sex workers covers a range of domains, some potentially modifiable by OHS programs and workplace safety interventions targeted at this population. We argue that commercial sex work should be considered as an occupation overdue for interventions to reduce workplace risks and enhance worker safety.

  5. Nature-based strategies for improving urban health and safety

    Science.gov (United States)

    Michelle C. Kondo; Eugenia C. South; Charles C. Branas

    2015-01-01

    Place-based programs are being noticed as key opportunities to prevent disease and promote public health and safety for populations at-large. As one key type of place-based intervention, nature-based and green space strategies can play an especially large role in improving health and safety for dwellers in urban environments such as US legacy cities that lack nature...

  6. 42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

  7. SCIENTIFIC SCHOOL DEPARTAMENT OF WORKPLACE SAFETY AND HEALTH

    Directory of Open Access Journals (Sweden)

    KAPLENKO G. G.

    2016-10-01

    Full Text Available Department “workplace safety and health and ergonomics” was created in 1971 at DECI. According to the Order of the State Committee of National Education of USSR on July 9, 1990 443 and by the decision of the Scientific Council of Institute on May 28, 1991 was reorganized into the Department of workplace safety and health. Over the 45 years of its existence the department has come a long way in the formation of educational and scientific potentsial

  8. Small business owners' health and safety intentions: A cross-sectional survey

    Directory of Open Access Journals (Sweden)

    Li Shelby

    2005-10-01

    Full Text Available Abstract Background Little is known about the variables underlying small business owners' behavioural intentions toward workplace health and safety. This project explores the relationship between three mediating variables (Attitude Toward Safety, Subjective Norm and Perceived Behavioural Control and owners' Intentions Toward Safety, following the Theory of Planned Behaviour. We also investigate the role of beliefs underlying each mediating variable. Methods Seven hundred businesses (5–50 employees were randomly selected from 4084 eligible companies in a manufacturing business database (SIC codes 24 to 39. The 348 respondents are on average 51 yrs of age, 86% male, 96% white and have 2 to 4 years of post-secondary school. Results All three mediator variables are significantly correlated with Intentions Toward Safety; Attitude Toward Safety shows the strongest correlation, which is confirmed by path analysis. Owners with higher attitudes toward safety have a higher probability of believing that improving workplace health and safety will make employees' healthier and happier, show that they care, increase employee productivity, lower workers' compensation costs, increase product quality and lower costs. Conclusion These results suggest that interventions aimed at increasing owners' health and safety intentions (and thus, behaviours should focus on demonstrating positive employee health and product quality outcomes.

  9. The Role of Labor-Management Committees in Safeguarding Worker Safety and Health.

    Science.gov (United States)

    Ruttenberg, Ruth

    There are thousands of labor-management committees for occupational safety and health in the United States. Most were established or activated after passage of the Occupational Safety and Health Act of 1970. Such committees can be an important tool when used as part of a comprehensive effort to achieve safety and health in the workplace. In the…

  10. 76 FR 74788 - Patient Safety Organizations: Voluntary Relinquishment From HealthWatch, Inc.

    Science.gov (United States)

    2011-12-01

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety... relinquishment from HealthWatch, Inc. of its status as a Patient Safety Organization (PSO). The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act), Public Law 109-41, 42 U.S.C. 299b-21--b-26...

  11. Training and qualification of health and safety technicians at a national laboratory

    International Nuclear Information System (INIS)

    Egbert, W.F.; Trinoskey, P.A.

    1994-10-01

    Over the last 30 years, Lawrence Livermore National Laboratory (LLNL) has successfully implemented the concept of a multi-disciplined technician. LLNL Health and Safety Technicians have responsibilities in industrial hygiene, industrial safety, health physics, as well as fire, explosive, and criticality safety. One of the major benefits to this approach is the cost-effective use of workers who display an ownership of health and safety issues which is sometimes lacking when responsibilities are divided. Although LLNL has always promoted the concept of a multi-discipline technician, this concept is gaining interest within the Department of Energy (DOE) community. In November 1992, individuals from Oak Ridge Institute of Science and Education (ORISE) and RUST Geotech, joined by LLNL established a committee to address the issues of Health and Safety Technicians. In 1993, the DOE Office of Environmental, Safety and Health, in response to the Defense Nuclear Facility Safety Board Recommendation 91-6, stated DOE projects, particularly environmental restoration, typically present hazards other than radiation such as chemicals, explosives, complex construction activities, etc., which require additional expertise by Radiological Control Technicians. They followed with a commitment that a training guide would be issued. The trend in the last two decades has been toward greater specialization in the areas of health and safety. In contrast, the LLNL has moved toward a generalist approach integrating the once separate functions of the industrial hygiene and health physics technician into one function

  12. The impact of health and safety committees. A study based on survey, interview, and Occupational Safety and Health Administration data.

    Science.gov (United States)

    Boden, L I; Hall, J A; Levenstein, C; Punnett, L

    1984-11-01

    In a study conducted to determine if the existence of a joint labor-management health and safety committee (HSC) was correlated with either the number of Occupational Safety and Health Administration (OSHA) complaints or hazardousness, as measured by OSHA serious citations, virtually no effect could be detected in a sample of 127 Massachusetts manufacturing firms. At a sample of 13 firms, interviews of HSC members were conducted. Committee attributes and perceptions about committee effectiveness were compared with the number of OSHA complaints and serious citations. There were fewer complaints and fewer serious citations at firms with HSCs that were perceived as effective. Results of the study suggest that the objective attributes of the committee may be less important to its success than the commitment of management and labor to solving workplace safety problems.

  13. 76 FR 41304 - Advisory Committee on Construction Safety and Health (ACCSH)

    Science.gov (United States)

    2011-07-13

    ... arising in the administration of the safety and health provisions under the Contract Work Hours and Safety....; Multilingual Issues, Diversity, Women in Construction-- 3:45 to 5 p.m. For additional information on ACCSH Work... and Health Act of 1970 (29 U.S.C. 656), Section 107 of the Contract Work Hours and Safety Standards...

  14. Safety and health practice among laboratory staff in Malaysian education sector

    Science.gov (United States)

    Husna Che Hassan, Nurul; Rasdan Ismail, Ahmad; Kamilah Makhtar, Nor; Azwadi Sulaiman, Muhammad; Syuhadah Subki, Noor; Adilah Hamzah, Noor

    2017-10-01

    Safety is the most important issue in industrial sector such as construction and manufacturing. Recently, the increasing number of accident cases reported involving school environment shows the important of safety issues in education sector. Safety awareness among staff in this sector is crucial in order to find out the method to prevent the accident occurred in future. This study was conducted to analyze the knowledge of laboratory staff in term of safety and health practice in laboratory. Survey questionnaires were distributing among 255 of staff laboratory from ten District Education Offices in Kelantan. Descriptive analysis shows that the understanding of safety and health practice are low while doing some job activities in laboratory. Furthermore, some of the staff also did not implemented safety practice that may contribute to unplanned event occur in laboratory. Suggestion that the staff at laboratory need to undergo on Occupational Safety and Health training to maintain and create safe environment in workplaces.

  15. Health, safety and the environment

    International Nuclear Information System (INIS)

    1991-01-01

    The central theme of this 1990 Annual Report from British Nuclear Fuels Limited (BNFL) is that the health and safety of the public and protection of the environment are of primary concern. The report describes the fuel cycle for the production of radioactive materials used by the United Kingdom nuclear industry. Radiation protection measures undertaken by BNFL are explained as is their environmental research programme. Detailed attention is paid to the monitoring of effluent discharges into the environment and arrangements for radioactive waste disposal. The work of each BNFL site is described. The report finishes with a description of its occupational safety measures. (UK)

  16. Perceived school safety is strongly associated with adolescent mental health problems.

    Science.gov (United States)

    Nijs, Miesje M; Bun, Clothilde J E; Tempelaar, Wanda M; de Wit, Niek J; Burger, Huibert; Plevier, Carolien M; Boks, Marco P M

    2014-02-01

    School environment is an important determinant of psychosocial function and may also be related to mental health. We therefore investigated whether perceived school safety, a simple measure of this environment, is related to mental health problems. In a population-based sample of 11,130 secondary school students, we analysed the relationship of perceived school safety with mental health problems using multiple logistic regression analyses to adjust for potential confounders. Mental health problems were defined using the clinical cut-off of the self-reported Strengths and Difficulties Questionnaire. School safety showed an exposure-response relationship with mental health problems after adjustment for confounders. Odds ratios increased from 2.48 ("sometimes unsafe") to 8.05 ("very often unsafe"). The association was strongest in girls and young and middle-aged adolescents. Irrespective of the causal background of this association, school safety deserves attention either as a risk factor or as an indicator of mental health problems.

  17. Teaching Safety and Health in the Workplace. An Instructor's Guide.

    Science.gov (United States)

    Occupational Safety and Health Administration, Washington, DC.

    The primary concern of the Occupational Safety and Health Act (OSHA) is to provide a safe and healthful workplace for every working man and woman in the nation. One way to help reduce the number of injuries and illnesses in the workplace is by training workers to be more aware of the job safety and health hazards and to teach them the methods of…

  18. [Implementation of a safety and health planning system in a teaching hospital].

    Science.gov (United States)

    Mariani, F; Bravi, C; Dolcetti, L; Moretto, A; Palermo, A; Ronchin, M; Tonelli, F; Carrer, P

    2007-01-01

    University Hospital "L. Sacco" had started in 2006 a two-year project in order to set up a "Health and Safety Management System (HSMS)" referring to the technical guideline OHSAS 18001:1999 and the UNI and INAIL "Guidelines for a health and safety management system at workplace". So far, the following operations had been implemented: Setting up of a specific Commission within the Risk Management Committee; Identification and appointment of Departmental Representatives of HSMS; Carrying out of a training course addressed to Workers Representatives for Safety and Departmental Representatives of HSMS; Development of an Integrated Informative System for Prevention and Safety; Auditors qualification; Inspection of the Occupational Health Unit and the Prevention and Safety Service: reporting of critical situations and monitoring solutions adopted. Short term objectives are: Self-evaluation through check-lists of each department; Sharing of the Improvement Plan among the departments of the hospital; Planning of Health and Safety training activities in the framework of the Hospital Training Plan; Safety audit.

  19. Safety for Compressed Gas and Air Equipment. Module SH-26. Safety and Health.

    Science.gov (United States)

    Center for Occupational Research and Development, Inc., Waco, TX.

    This student module on safety for compressed gas and air equipment is one of 50 modules concerned with job safety and health. This module presents technical data about commonly used gases and stresses the procedures necessary for safe handling of compressed gases. Following the introduction, 14 objectives (each keyed to a page in the text) the…

  20. Safety in Elevators and Grain Handling Facilities. Module SH-27. Safety and Health.

    Science.gov (United States)

    Center for Occupational Research and Development, Inc., Waco, TX.

    This student module on safety in elevators and grain handling facilities is one of 50 modules concerned with job safety and health. Following the introduction, 15 objectives (each keyed to a page in the text) the student is expected to accomplish are listed (e.g., Explain how explosion suppression works). Then each objective is taught in detail,…

  1. An airport occupational health and safety management system from the OHSAS 18001 perspective.

    Science.gov (United States)

    Dejanović, Dejana; Heleta, Milenko

    2016-09-01

    Occupational health and safety represents a set of technical, medical, legal, psychological, pedagogical and other measures with the aim to detect and eliminate hazards that threaten the lives and health of employees. These measures should be applied in a systematic way. Therefore, the aim of this study is to review occupational health and safety legislation in Serbia and the requirements that airports should fulfill for Occupational Health and Safety Assessment Series certification. Analyzing the specificity of airport activities and injuries as their outcomes, the article also proposes preventive measures for the health and safety of employees. Furthermore, the airport activities which are the most important from the standpoint of risks are defined, as the goals for occupational health and safety performance improvement.

  2. Health physics, safety and medical services report for 1989

    International Nuclear Information System (INIS)

    Burt, A.K.; Bird, R.W.

    1990-09-01

    The Health Physics, Safety and Medical Services Report for Harwell Laboratory for 1989 includes data on the monitoring of the working environment, personnel monitoring, radiological incidents, disposal of radioactive waste and protection of the public. Work on emergency planning, non-radiological health and safety, occupational hygiene, operations support is also discussed. Finally the medical services available and the medical examinations performed are described. (UK)

  3. 76 FR 73687 - Advisory Committee on Construction Safety and Health (ACCSH)

    Science.gov (United States)

    2011-11-29

    ... arising in the administration of the safety and health provisions under the Contract Work Hours and Safety... 10:10 a.m. to 12:10 p.m. Multilingual Issues, Diversity, Women in Construction 1 to 3 p.m. ACCSH Work... Health Act of 1970 (29 U.S.C. 656), Section 107 of the Contract Work Hours and Safety Standards Act...

  4. 29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

    Science.gov (United States)

    2010-07-01

    ... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal agency standards affecting occupational safety and health. (a) Where employees of different agencies...

  5. OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT WITH THE USE OF BRAINSTORMING METHOD

    Directory of Open Access Journals (Sweden)

    Artur Woźny

    2018-01-01

    Full Text Available Health and safety at work issue concerns every employer. Adjusting the work environment to legal requirements and standards is the key to creating health and safety culture. In every functioning OSH system there are various types of problems that employers face. The subject of the article is how to solve the problem of safety in production systems using the brainstorming method. The basic ele-ment of creating health and safety culture is an appropriate approach to occupational risk manage-ment. Risk assessment in the workplace should take place in teams as it is possible to reliably identi-fy hazards and accurately assess them.

  6. Training for an effective health and safety committee in a small business setting.

    Science.gov (United States)

    Crollard, Allison; Neitzel, Richard L; Dominguez, Carlos F; Seixas, Noah S

    2013-01-01

    Health and safety committees are often heralded as a key element of successful health and safety programs, and are thought to represent a means of engaging workers in health and safety efforts. While the understanding of the factors that make these committees effective is growing, there are few resources for how to assist committees in developing these characteristics. This paper describes one approach to creating and implementing a training intervention aimed at improving health and safety committee function at one multilingual worksite. Short-term impacts were evaluated via questionnaire and qualitative observations of committee function. Results indicated high satisfaction with the training as well as modest increases in participation, cooperation, role clarity, and comfort with health and safety skills among committee members. The committee also made considerable achievements in establishing new processes for effective function. Similar interventions may be useful in other workplaces to increase health and safety committee success.

  7. Regulatory role and approach of BARC Safety Council in safety and occupational health in BARC facilities

    International Nuclear Information System (INIS)

    Rajdeep; Jayarajan, K.; Taly, Y.K.

    2016-01-01

    Bhabha Atomic Research Centre is involved in multidisciplinary research and developmental activities, related to peaceful use of nuclear energy and its societal benefits. In order to achieve high level of performance of these facilities, the best efforts are made to maintain good health of the plant personnel and good working conditions. BARC Safety Council (BSC), which is the regulatory body for BARC facilities, regulates radiation safety, industrial safety and surveillance of occupational health, by implementing various rules and guidelines in BARC facilities. BARC Safety framework consists of various committees in a 3-tier system. The first tier is BSC, which is the apex body authorized for issuing directives, permissions, consents and authorizations. It is having responsibility of ensuring protection and safety of public, environment, personnel and facilities of BARC through enforcement of radiation protection and industrial safety programmes. Besides the 18 committees in 2"n"d tier, there are 6 other expert committees which assist in functioning of BSC. (author)

  8. Changing the internal health and safety organization through organizational learning and change management

    DEFF Research Database (Denmark)

    Hasle, Peter; Jensen, P.L.

    2006-01-01

    Research from several countries indicates that the internal health and safety organization is marginalized in most companies, and it is difficult for the professionals to secure a proper role in health and safety on the companies' present agenda. The goal of a Danish project involving a network...... of I I companies was to search for a solution to this problem. The health and safety managers and safety representatives played the role of "change agents" for local projects aiming to develop the health and safety organization. The study showed that 3 of the 11 companies proved to be able to implement...

  9. 75 FR 14471 - Advisory Committee on Construction Safety and Health (ACCSH)

    Science.gov (United States)

    2010-03-25

    ... and Health (ACCSH) and ACCSH Work Group meetings. SUMMARY: ACCSH will meet April 14 and 16, 2010, in... Safety and Health in the formulation of standards affecting the construction industry and on policy matters arising in the administration of the safety and health provisions of the Contract Work Hours and...

  10. Health, safety and environmental research program

    International Nuclear Information System (INIS)

    Dinner, P.J.

    1983-01-01

    This report outlines the Health, Safety and Environmental Research Program being undertaken by the CFFTP. The Program objectives, relationship to other CFFTP programs, implementation plans and expected outputs are stated. Opportunities to build upon the knowledge and experience gained in safely managing tritium in the CANDU program, by addressing generic questions pertinent to tritium safety for fusion facilities, are identified. These opportunities exist across a broad spectrum of issues covering the anticipated behaviour of tritium in fusion facilities, the surrounding environment and in man

  11. Research on Occupational Safety, Health Management and Risk Control Technology in Coal Mines.

    Science.gov (United States)

    Zhou, Lu-Jie; Cao, Qing-Gui; Yu, Kai; Wang, Lin-Lin; Wang, Hai-Bin

    2018-04-26

    This paper studies the occupational safety and health management methods as well as risk control technology associated with the coal mining industry, including daily management of occupational safety and health, identification and assessment of risks, early warning and dynamic monitoring of risks, etc.; also, a B/S mode software (Geting Coal Mine, Jining, Shandong, China), i.e., Coal Mine Occupational Safety and Health Management and Risk Control System, is developed to attain the aforementioned objectives, namely promoting the coal mine occupational safety and health management based on early warning and dynamic monitoring of risks. Furthermore, the practical effectiveness and the associated pattern for applying this software package to coal mining is analyzed. The study indicates that the presently developed coal mine occupational safety and health management and risk control technology and the associated software can support the occupational safety and health management efforts in coal mines in a standardized and effective manner. It can also control the accident risks scientifically and effectively; its effective implementation can further improve the coal mine occupational safety and health management mechanism, and further enhance the risk management approaches. Besides, its implementation indicates that the occupational safety and health management and risk control technology has been established based on a benign cycle involving dynamic feedback and scientific development, which can provide a reliable assurance to the safe operation of coal mines.

  12. Regulatory system reform of occupational health and safety in China.

    Science.gov (United States)

    Wu, Fenghong; Chi, Yan

    2015-01-01

    With the explosive economic growth and social development, China's regulatory system of occupational health and safety now faces more and more challenges. This article reviews the history of regulatory system of occupational health and safety in China, as well as the current reform of this regulatory system in the country. Comprehensive, a range of laws, regulations and standards that promulgated by Chinese government, duties and responsibilities of the regulatory departments are described. Problems of current regulatory system, the ongoing adjustments and changes for modifying and improving regulatory system are discussed. The aim of reform and the incentives to drive forward more health and safety conditions in workplaces are also outlined.

  13. HealthLines: Quick Tips for Seasonal Health, Safety and Fun... "Ah, when the sun beats down…"

    Science.gov (United States)

    ... Current Issue Past Issues HealthLines: Quick Tips for Seasonal Health, Safety and Fun Past Issues / Spring 2007 ... and protect against reflected UV radiation (from sand, water, or snow). UV radiation ... and stress fractures. Remember safety gear. Depending on the sport, ...

  14. Applying health education theory to patient safety programs: three case studies.

    Science.gov (United States)

    Gilkey, Melissa B; Earp, Jo Anne L; French, Elizabeth A

    2008-04-01

    Program planning for patient safety is challenging because intervention-oriented surveillance data are not yet widely available to those working in this nascent field. Even so, health educators are uniquely positioned to contribute to patient safety intervention efforts because their theoretical training provides them with a guide for designing and implementing prevention programs. This article demonstrates the utility of applying health education concepts from three prominent patient safety campaigns, including the concepts of risk perception, community participation, and social marketing. The application of these theoretical concepts to patient safety programs suggests that health educators possess a knowledge base and skill set highly relevant to patient safety and that their perspective should be increasingly brought to bear on the design and evaluation of interventions that aim to protect patients from preventable medical error.

  15. Safety Features of Material and Personnel Movement Devices. Module SH-25. Safety and Health.

    Science.gov (United States)

    Center for Occupational Research and Development, Inc., Waco, TX.

    This student module on safety features of material and personnel movement devices is one of 50 modules concerned with job safety and health. This module covers safe conditions and operating practices for conveyors, elevators, escalators, moving walks, manlifts, forklifts, and motorized hand trucks. Following the introduction, 10 objectives (each…

  16. EMPLOYEE PERCEPTIONS OF OCCUPATIONAL HEALTH AND SAFETY STANDARDS IN THE STEEL INDUSTRY

    Directory of Open Access Journals (Sweden)

    J. Mojapelo

    2016-07-01

    Full Text Available The inability to follow occupational health and safety standards typically resultsin accidents that place severe financial burdens on both employees as well asorganisations. The aim of this studyis to explore the perceptionsof employees inthe steel industry towards occupational health and safety standards in the steelindustry in South Africa. A survey was conducted in which a structuredquestionnaire was distributed to a purposive sample of 165 employees employedby a largesteel processing company in Gauteng Province. The collected data wereanalysed using SPSS (Version 22.0. A combination of descriptive statistics andanalysis of mean scores was applied to meet the aim of the study. The resultsreveal that employees in the steel industry perceived that occupational health andsafety standards were satisfactory in all seven occupational health and safetydimensions considered in this study. These are (1 information and training, (2health and safety awareness, (3 employee behaviour (4 role of the supervisor, (5health and safety reporting mechanisms, (6 workplace inspection, and (7workplace environment. Among these dimensions, safety awareness emerged asthe most important dimension to employees. The results may be utilised bymanagers in the steel industry to identify and direct their attention to the keyoccupational health and safety factors in their different contexts.

  17. Safety, Health, and Environmental Auditing A Practical Guide

    CERN Document Server

    Pain, Simon Watson

    2010-01-01

    A practical guide to environmental, safety, and occupational health audits. It allows organizations and business to avoid expensive external auditors and retain the knowledge and learning 'in-house'. It allows any competent manager or safety/environmental officer to undertake in-house audits in a competent and reproducible fashion.

  18. Building a safety culture in global health: lessons from Guatemala.

    Science.gov (United States)

    Rice, Henry E; Lou-Meda, Randall; Saxton, Anthony T; Johnston, Bria E; Ramirez, Carla C; Mendez, Sindy; Rice, Eli N; Aidar, Bernardo; Taicher, Brad; Baumgartner, Joy Noel; Milne, Judy; Frankel, Allan S; Sexton, J Bryan

    2018-01-01

    Programmes to modify the safety culture have led to lasting improvements in patient safety and quality of care in high-income settings around the world, although their use in low-income and middle-income countries (LMICs) has been limited. This analysis explores (1) how to measure the safety culture using a health culture survey in an LMIC and (2) how to use survey data to develop targeted safety initiatives using a paediatric nephrology unit in Guatemala as a field test case. We used the Safety, Communication, Operational Reliability, and Engagement survey to assess staff views towards 13 health climate and engagement domains. Domains with low scores included personal burnout, local leadership, teamwork and work-life balance. We held a series of debriefings to implement interventions targeted towards areas of need as defined by the survey. Programmes included the use of morning briefings, expansion of staff break resources and use of teamwork tools. Implementation challenges included the need for education of leadership, limited resources and hierarchical work relationships. This report can serve as an operational guide for providers in LMICs for use of a health culture survey to promote a strong safety culture and to guide their quality improvement and safety programmes.

  19. 75 FR 10629 - Federal Advisory Council on Occupational Safety and Health

    Science.gov (United States)

    2010-03-08

    ... Part III Department of Labor Occupational Safety and Health Administration Federal Advisory Council on Occupational Safety and Health; Notice #0;#0;Federal Register / Vol. 75, No. 44 / Monday, March 8, 2010 / Notices#0;#0; [[Page 10630

  20. An analysis of electronic health record-related patient safety incidents.

    Science.gov (United States)

    Palojoki, Sari; Mäkelä, Matti; Lehtonen, Lasse; Saranto, Kaija

    2017-06-01

    The aim of this study was to analyse electronic health record-related patient safety incidents in the patient safety incident reporting database in fully digital hospitals in Finland. We compare Finnish data to similar international data and discuss their content with regard to the literature. We analysed the types of electronic health record-related patient safety incidents that occurred at 23 hospitals during a 2-year period. A procedure of taxonomy mapping served to allow comparisons. This study represents a rare examination of patient safety risks in a fully digital environment. The proportion of electronic health record-related incidents was markedly higher in our study than in previous studies with similar data. Human-computer interaction problems were the most frequently reported. The results show the possibility of error arising from the complex interaction between clinicians and computers.

  1. Plutonium working group report on environmental, safety and health vulnerabilities associated with the department's plutonium storage. Volume II, Appendix B, Part 10: Sandia National Laboratories - New Mexico site assessment team report

    International Nuclear Information System (INIS)

    1994-09-01

    On March 15, 1994, Secretary O'Leary directed the Office of Environment, Safety and Health to conduct an environment, safety and health (ES ampersand H) vulnerability study of plutonium at DOE sites. This report presents Sandia National Laboratories'/New Mexico (SNL/NM) response to that request. Sandia National Laboratories (SNL) is a multi-program laboratory operated for United States Department of Energy(DOE) by Martin Marietta Corporation. The primary mission of Sandia is research and development of nuclear weapons systems for concept to retirement. The laboratory also has extensive programs in nuclear reactor safety, nuclear safeguards, energy research, and microelectronics. The facilities addressed in the SNL/NM Site Assessment include the Hot Cell Facility (HCF), the Annular Core Research Reactor (ACRR), and dedicated on-site nuclear material storage facilities. Also included in the assessment were sealed radiation sources that contain plutonium

  2. Training Course for Compliance Safety and Health Officers. Final Report.

    Science.gov (United States)

    McKnight, A. James; And Others

    The report describes revision of the Compliance Safety and Health Officers (CSHO) course for the Department of Labor, Occupational Safety and Health Administration (OSHA). The CSHO's job was analyzed in depth, in accord with OSHA standards, policies, and procedures. A listing of over 1,700 violations of OSHA standards was prepared, and specialists…

  3. Occupational Safety and Health Practices: An Alarming Call to Action

    Science.gov (United States)

    Threeton, Mark D.; Evanoski, Danielle C.

    2014-01-01

    In an effort to provide additional insight on providing a secure teaching and learning environment within schools, this study sought to: (1) explore the safety and health practices within Career and Technical Education (CTE); and (2) identify the perceived obstacles which appear to hinder implementation of health and safety programs. While it…

  4. Reducing health care hazards: lessons from the commercial aviation safety team.

    Science.gov (United States)

    Pronovost, Peter J; Goeschel, Christine A; Olsen, Kyle L; Pham, Julius C; Miller, Marlene R; Berenholtz, Sean M; Sexton, J Bryan; Marsteller, Jill A; Morlock, Laura L; Wu, Albert W; Loeb, Jerod M; Clancy, Carolyn M

    2009-01-01

    The movement to improve quality of care and patient safety has grown, but examples of measurable and sustained progress are rare. The slow progress made in health care contrasts with the success of aviation safety. After a tragic 1995 plane crash, the aviation industry and government created the Commercial Aviation Safety Team to reduce fatal accidents. This public-private partnership of safety officials and technical experts is responsible for the decreased average rate of fatal aviation accidents. We propose a similar partnership in the health care community to coordinate national efforts and move patient safety and quality forward.

  5. MP-Division health and safety reference handbook

    International Nuclear Information System (INIS)

    Putnam, T.M.

    1987-09-01

    This report presents the objectives, organization, policies, and essential rules and procedures that have been adopted by MP Division and that form the basis of the Health and Safety Program of the Clinton P. Anderson Meson Physics Facility (LAMPF). The facility includes the beam-delivery systems for the Los Alamos Neutron Scattering Center and the Weapons Neutron Research Facility (LANSCE/WNR). The program is designed not only to assure the health and safety of all personnel, including users, in their work at LAMPF, and of MP-Division staff in their work on the LANSCE/WNR beam lines, but also to protect the facility (buildings and equipment) and the environment. 33 refs., 18 figs., 2 tabs

  6. Applied Health Physics and Safety annual report for 1975

    International Nuclear Information System (INIS)

    1976-08-01

    This report describes and summarizes the activities of the applied sections and/or groups of the Health Physics Division. Projects and activities covered include personnel monitoring, environmental monitoring, radiation and safety surveys, and industrial safety

  7. Health innovation for patient safety improvement.

    Science.gov (United States)

    Sellappans, Renukha; Chua, Siew Siang; Tajuddin, Nur Amani Ahmad; Mei Lai, Pauline Siew

    2013-01-01

    Medication error has been identified as a major factor affecting patient safety. Many innovative efforts such as Computerised Physician Order Entry (CPOE), a Pharmacy Information System, automated dispensing machines and Point of Administration Systems have been carried out with the aim of improving medication safety. However, areas remain that require urgent attention. One main area will be the lack of continuity of care due to the breakdown of communication between multiple healthcare providers. Solutions may include consideration of "health smart cards" that carry vital patient medical information in the form of a "credit card" or use of the Malaysian identification card. However, costs and technical aspects associated with the implementation of this health smart card will be a significant barrier. Security and confidentiality, on the other hand, are expected to be of primary concern to patients. Challenges associated with the implementation of a health smart card might include physician buy-in for use in his or her everyday practice. Training and technical support should also be available to ensure the smooth implementation of this system. Despite these challenges, implementation of a health smart card moves us closer to seamless care in our country, thereby increasing the productivity and quality of healthcare.

  8. Health innovation for patient safety improvement

    Directory of Open Access Journals (Sweden)

    Renukha Sellappans

    2013-01-01

    Full Text Available Medication error has been identified as a major factor affecting patient safety. Many innovative efforts such as Computerised Physician Order Entry (CPOE, a Pharmacy Information System, automated dispensing machines and Point of Administration Systems have been carried out with the aim of improving medication safety. However, areas remain that require urgent attention. One main area will be the lack of continuity of care due to the breakdown of communication between multiple healthcare providers. Solutions may include consideration of “health smart cards” that carry vital patient medical information in the form of a “credit card” or use of the Malaysian identification card. However, costs and technical aspects associated with the implementation of this health smart card will be a significant barrier. Security and confidentiality, on the other hand, are expected to be of primary concern to patients. Challenges associated with the implementation of a health smart card might include physician buy-in for use in his or her everyday practice. Training and technical support should also be available to ensure the smooth implementation of this system. Despite these challenges, implementation of a health smart card moves us closer to seamless care in our country, thereby increasing the productivity and quality of healthcare.

  9. Industrial Safety and Applied Health Physics Division, annual report for 1982

    International Nuclear Information System (INIS)

    1983-12-01

    Activities during the past year are summarized for the Health Physics Department, the Environmental Management Department, and the Safety Department. The Health Physics Department conducts radiation and safety surveys, provides personnel monitoring services for both external and internal radiation, and procures, services, and calibrates appropriate portable and stationary health physics instruments. The Environmental Management Department insures that the activities of the various organizations within ORNL are carried out in a responsible and safe manner. This responsibility involves the measurement, field monitoring, and evaluation of the amounts of radionuclides and hazardous materials released to the environment and the control of hazardous materials used within ORNL. The department also collaborates in the design of ORNL Facilities to help reduce the level of materials released to the environment. The Safety Department is responsible for maintaining a high level of staff safety. This includes aspects of both operational and industrial safety and also coordinates the activities of the Director's Safety Review Committee

  10. Industrial Safety and Applied Health Physics Division, annual report for 1982

    Energy Technology Data Exchange (ETDEWEB)

    1983-12-01

    Activities during the past year are summarized for the Health Physics Department, the Environmental Management Department, and the Safety Department. The Health Physics Department conducts radiation and safety surveys, provides personnel monitoring services for both external and internal radiation, and procures, services, and calibrates appropriate portable and stationary health physics instruments. The Environmental Management Department insures that the activities of the various organizations within ORNL are carried out in a responsible and safe manner. This responsibility involves the measurement, field monitoring, and evaluation of the amounts of radionuclides and hazardous materials released to the environment and the control of hazardous materials used within ORNL. The department also collaborates in the design of ORNL Facilities to help reduce the level of materials released to the environment. The Safety Department is responsible for maintaining a high level of staff safety. This includes aspects of both operational and industrial safety and also coordinates the activities of the Director's Safety Review Committee. (ACR)

  11. Occupational health and safety in the Moroccan construction sites: preliminary diagnosis

    Science.gov (United States)

    Tarik, Bakeli; Adil, Hafidi Alaoui

    2018-05-01

    Managing occupational health and safety on Moroccan construction sector represents the first step for projects' success. In fact, by avoiding accidents, all the related direct and indirect costs and delays can be prevented. That leads to an important question always asked by any project manager: what are the factors responsible for accidents? How can they be avoided? Through this research, the aim is to go through these questions, to contribute in occupational health and safety principles understanding, to identify construction accidentology and risk management opportunities and to approach the case of Moroccan construction sites by an accurate diagnosis. The approach is to make researchers, managers, stakeholders and deciders aware about the criticality of construction sites health and safety situation. And, to do the first step for a scientific research project in relation with health and safety in the Moroccan construction sector. For this, the paper will study the related state of art namely about construction sites accidents causation, and will focus on Reason's `Swiss cheese' model and its utilization for Moroccan construction sites health and safety diagnosis. The research will end with an estimation of an accidents fatality rate in the Moroccan construction sector and a benchmarking with the international rates. Finally, conclusions will be presented about the necessity of Occupational Health and Safety Management System (OHSMS) implementation, which shall cover all risk levels, and insure, at the same time, that the necessary defenses against accidents are on place.

  12. Integrating environment health and safety management at Petro-Canada

    International Nuclear Information System (INIS)

    Raymond, G.

    1993-01-01

    Petro-Canada has developed a tool to integrate, measure, and improve its management systems of environment, health, and safety (EH ampersand S). This tool, called the Total Loss Management System, is described in the areas of general management issues, policies and procedures, evaluations, organization, stewardship, issue management, and performance measures. Petro-Canada's policies on occupational health and safety are consistent with its environmental policy, being structured in the same way. An integrated audit system is used to cover health, safety, industrial hygiene, reliability, environment, and risk management. EH ampersand S matters are integrated at the corporate level in a separate department. Regional divisions review EH ampersand S performance every month, incidents are discussed, and preventive measures are taken as necessary. Regional performances are combined every quarter for ultimate presentation to the Petro-Canada board. New or emerging issues that may affect divisions are assigned an issue sponsor, a member of divisional management who makes sure the issue receives the resources necessary to study and define its impact. Examples of issues include soil contamination, process hazard management, and benzene exposure limits. Performance measures flow from the corporate environment and occupational health and safety policies, and come in two types: those that measure activities to improve performance and those that measure the outcome of the activities

  13. PUREX Deactivation Health and Safety documentation

    Energy Technology Data Exchange (ETDEWEB)

    Dodd, E.N. III

    1995-01-01

    The purpose of the PUREX Deactivation Project is to establish a passively safe and environmentally secure configuration of PUREX at the Hanford Site, and to preserve that configuration for a 10-year horizon. The 10-year horizon is used to predict future maintenance requirements and represents they typical time duration expended to define, authorize, and initiate the follow-on Decontamination and Decommissioning (D&D) activities. This document was prepared to increase attention to worker safety issues during the deactivation project and, as such, identifies the documentation and programs associated with PUREX Deactivation Health and Safety.

  14. 48 CFR 2052.235-71 - Safety, health, and fire protection.

    Science.gov (United States)

    2010-10-01

    ... extension of time or for compensation or damages by reason of, or in connection with, this type of work... performance of the work under this contract to protect the health and safety of its employees and of members... hazards to life and property. The contractor shall comply with all applicable health, safety, and fire...

  15. Principles and Practices of Occupational Safety and Health: Administrator's Manual.

    Science.gov (United States)

    Occupational Safety and Health Administration, Washington, DC.

    The manual guides an instructor in conducting a training course for first-line supervisors to familiarize them with six aspects relating to the Occupational Safety and Health Act of 1970: (1) requirements of the Act, (2) compliance with its standards, (3) identification of health and safety hazards, (4) correction of adverse conditions, (5) record…

  16. Health and Safety Legislation in Australia: Complexity for Training Remains

    Science.gov (United States)

    Bahn, Susanne; Barratt-Pugh, Llandis

    2014-01-01

    This paper presents the findings from a study that examined the impact of the National Occupational Health and Safety Strategy 2002-2012 and the harmonisation of the Work Health and Safety Act 2011 on Australian training design, delivery and outcomes. There has been a comparative reduction in work related injuries, fatalities and disease, and…

  17. Plutonium working group report on environmental, safety and health vulnerabilities associated with the Department's plutonium storage. Volume I: Summary

    International Nuclear Information System (INIS)

    1994-11-01

    At the conclusion of the Cold War, the Department of Energy (DOE) stopped plutonium processing for nuclear weapons production. Facilities used for that purpose now hold significant quantities of plutonium in various forms. Unless properly stored and handled, plutonium can present environment, safety and health (ES ampersand H) hazards. Improperly stored plutonium poses a variety of hazards. When containers or packaging fail to fully protect plutonium metal from exposure to air, oxidation can occur and cause packaging failures and personnel contamination. Contamination can also result when plutonium solutions leak from bottles, tanks or piping. Plutonium in the form of scrap or residues generated by weapons production are often very corrosive, chemically reactive and difficult to contain. Buildings and equipment that are aging, poorly maintained or of obsolete design contribute to the overall problem. Inadvertent accumulations of plutonium of any form in sufficient quantities within facilities can result in nuclear criticality events that could emit large amounts of radiation locally. Contamination events and precursors of criticality events are causing safety and health concerns for workers at the Department's plutonium facilities. Contamination events also potentially threaten the public and the surrounding environment

  18. Regulatory system reform of occupational health and safety in China

    Science.gov (United States)

    WU, Fenghong; CHI, Yan

    2015-01-01

    With the explosive economic growth and social development, China’s regulatory system of occupational health and safety now faces more and more challenges. This article reviews the history of regulatory system of occupational health and safety in China, as well as the current reform of this regulatory system in the country. Comprehensive, a range of laws, regulations and standards that promulgated by Chinese government, duties and responsibilities of the regulatory departments are described. Problems of current regulatory system, the ongoing adjustments and changes for modifying and improving regulatory system are discussed. The aim of reform and the incentives to drive forward more health and safety conditions in workplaces are also outlined. PMID:25843565

  19. Health and safety at the Whiteshell Nuclear Research Establishment

    International Nuclear Information System (INIS)

    LeNeveu, D.M.

    1982-04-01

    This report outlines the health and safety program at the Whiteshell Nuclear Research Establishment. It describes the procedures in place to ensure that a high standard of conventional industrial and radiation safety is maintained in the workplace

  20. The Agency's Health and Safety Measures

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1960-05-31

    The Agency's health and safety measures as approved by the Board of Governors on 31 March 1960 in implementation of Articles III. A. 6 and XII of the Statute of the Agency are reproduced in this document for the information of all Members.

  1. 5 CFR 5201.105 - Additional rules for Mine Safety and Health Administration employees.

    Science.gov (United States)

    2010-01-01

    ... for Mine Safety and Health Administration employees. The rules in this section apply to employees of... Mine Safety and Health Act. Example: A mine inspector who was a former employee of mining company X... Secretary of labor for Mine Safety and Health or the Assistant Secretary's designee may grant an employee a...

  2. Promoting health and safety for traveling and commuting employees.

    Science.gov (United States)

    Pochat-Debroux, Sophia

    2008-09-01

    In a society that relies on a growing market economy and free enterprise, Americans spend inordinate time commuting and traveling for work. Aircraft and private vehicles are the two primary modes of work-related travel, with each having its own inherit risks and hazards. Although much has been written about international travel health, little has been published about protecting the health and safety of workers during domestic business travel. The intent of this article is to highlight the statistics associated with domestic business travel and present sound rationale for an inclusive and comprehensive domestic travel health and safety program for employees.

  3. Technical Safety Appraisal of the Lawrence Livermore National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-01

    This report documents the results of the Technical Safety Appraisal (TSA) of the Lawrence Livermore National Laboratory (LLNL) (including the Site 300 area), Livermore, California, conducted from February 26 to April 5, 1990. The purpose of the assessment was to provide the Secretary of Energy with the status of Environment, Safety and Health (ES H) Programs at LLNL. LLNL is operated by the University of California for the Department of Energy (DOE), and is a multi-program, mission-oriented institution engaged in fundamental and applied research programs that require a multidisciplinary approach. 1 fig.

  4. Danger zone: Men, masculinity and occupational health and safety in high risk occupations.

    Science.gov (United States)

    Stergiou-Kita, Mary; Mansfield, Elizabeth; Bezo, Randy; Colantonio, Angela; Garritano, Enzo; Lafrance, Marc; Lewko, John; Mantis, Steve; Moody, Joel; Power, Nicole; Theberge, Nancy; Westwood, Eleanor; Travers, Krista

    2015-12-01

    The workplace is a key setting where gender issues and organizational structures may influence occupational health and safety practices. The enactment of dominant norms of masculinity in high risk occupations can be particularly problematic, as it exposes men to significant risks for injuries and fatalities. To encourage multi-disciplinary collaborations and advance knowledge in the intersecting areas of gender studies, men's health, work and workplace health and safety, a national network of thirteen researchers and health and safety stakeholders completed a critical literature review examining the intersection between masculinities and men's workplace health and safety in order to: (i) account for research previously undertaken in this area; (ii) identify themes that may inform our understanding of masculinity and workplace health and safety and; (iii) identify research and practice gaps in relation to men's workplace health and safety. In this paper we present key themes from this review. Recommendations are made regarding: (i) how to define gender; (ii) how to attend to and identify how masculinities may influence workers' identities, perceptions of occupational risks and how institutionalized practices can reinforce norms of masculinity; (iii) the importance of considering how masculinities may intersect with other variables (e.g. historical context, age, class, race, geographical location) and; (iv) the added significance of present-day labour market forces on men's occupational health and safety.

  5. Agricultural Health and Safety Survey in Friuli Venezia Giulia

    Directory of Open Access Journals (Sweden)

    Sirio Rossano Secondo Cividino

    2018-01-01

    Full Text Available The work in the agricultural sector has taken on a fundamental role in the last decades, due to the still too high rate of fatal injuries, workplace accidents, and dangerous occurrences reported each year. The average old age of agricultural machinery is one of the main issues at stake in Italy. Numerous safety problems stem from that; therefore, two surveys were conducted in two different periods, on current levels of work safety in agriculture in relation to agricultural machinery’s age and efficiency, and to show the levels of actual implementation of the Italian legislation on safety and health at work in the agricultural sector. The surveys were carried out, considering a sample of 161 farms located in the region Friuli Venezia Giulia (North-East of Italy. The research highlights the most significant difficulties the sample of farms considered have in enforcing the law. One hand, sanitary surveillance and workers’ information and training represent the main deficiencies and weakest points in family farms. Moreover, family farms do not generally provide the proper documentation concerning health and safety at workplaces, when they award the contract to other companies. On the other hand, lack of maintenance program for machinery and equipment, and of emergency plans and participation of workers’ health and safety representative, are the most common issues in farms with employees. Several difficulties are also evident in planning workers’ training programs. Furthermore, the company physician’s task is often limited to medical controls, so that he is not involved in risk assessment and training. Interviews in heterogeneous samples of farms have shown meaningful outcomes, which have subsequently been used to implement new databases and guidelines for Health and Safety Experts and courses in the field of Work Safety in agriculture. In conclusion, although the legislation making training courses for tractor operators and tractor

  6. Occupational health and safety services for immigrant workers in Japanese workplaces.

    Science.gov (United States)

    Uchino, Asuka; Muto, Takashi; Muto, Shigeki

    2010-01-01

    The objective of this study was to clarify the status of occupational health and safety services for immigrant workers, the barriers to employing immigrant workers and the needs of the managers in workplaces to keep immigrant workers healthy and safe. This study was a cross-sectional survey. We sent self-administered questionnaires to 126 workplaces in the western part of Shizuoka Prefecture, Japan in August 2006. The questionnaire included the characteristics of the workplace, barriers to employing immigrant workers, current actions to keep immigrant workers healthy and safe, the implementation rate of health checkups and important issues to keep immigrant workers healthy and safe. Implementation rates of health and safety education, creating job instruction manuals written in their native languages, creating safety signs written in their native languages, and the use of translators were 62.5%, 50.0%, 41.1% and 37.5%, respectively. Implementation rates of general health checkups, special health checkups and follow up after health checkups were 80.8%, 73.6% and 67.3%, respectively. The most important issue which the managers considered kept immigrant workers healthy and safe was health checkups (69.6%). In conclusion, several occupational health and safety services were conducted for immigrant workers without a margin to compare with Japanese workers.

  7. Health and safety plan for characterization sampling of ETR and MTR facilities

    International Nuclear Information System (INIS)

    Baxter, D.E.

    1994-10-01

    This health and safety plan establishes the procedures and requirements that will be used to minimize health and safety risks to persons performing Engineering Test Reactor and Materials Test Reactor characterization sampling activities, as required by the Occupational Safety and Health Administration standard, 29 CFR 1910.120. It contains information about the hazards involved in performing the tasks, and the specific actions and equipment that will be used to protect persons working at the site

  8. Proceedings of Twenty-Seventh Annual Institute on Mining Health, Safety and Research

    Energy Technology Data Exchange (ETDEWEB)

    Bockosh, G.R. [ed.] [Pittsburgh Research Center, US Dept. of Energy (United States); Langton, J. [ed.] [Mine Safety and Health Administration, US Dept. of Labor (United States); Karmis, M. [ed.] [Virginia Polytechnic Institute and State University. Dept. of Mining and Minerals Engineering, Blacksburg (United States)

    1996-12-31

    This Proceedings contains the presentations made during the program of the Twenty-Seventh Annual Institute on Mining Health, Safety and Research held at Virginia Polytechnic Institute and State University, Blacksburg, Virginia, on August 26-28, 1996. The Twenty-Seventh Annual Institute on Mining, Health, Safety and Research was the latest in a series of conferences held at Virginia Polytechnic Institute and State University, cosponsored by the Mine Safety and Health Administration, United States Department of Labor, and the Pittsburgh Research Center, United States Department of Energy (formerly part of the Bureau of Mines, U. S. Department of Interior). The Institute provides an information forum for mine operators, managers, superintendents, safety directors, engineers, inspectors, researchers, teachers, state agency officials, and others with a responsible interest in the important field of mining health, safety and research. In particular, the Institute is designed to help mine operating personnel gain a broader knowledge and understanding of the various aspects of mining health and safety, and to present them with methods of control and solutions developed through research. Selected papers have been processed separately for inclusion in the Energy Science and Technology database.

  9. 23 CFR 635.108 - Health and safety.

    Science.gov (United States)

    2010-04-01

    ... CONSTRUCTION AND MAINTENANCE Contract Procedures § 635.108 Health and safety. Contracts for projects shall... to protect property in connection with the performance of the work covered by the contract. ...

  10. Agricultural occupational health and safety perspectives among Latino-American youth.

    Science.gov (United States)

    Perla, M E; Iman, Esmeralda; Campos, Leticia; Perkins, Alexandra; Liebman, Amy K; Miller, Mary E; Beaudet, Nancy J; Karr, Catherine J

    2015-01-01

    Agricultural work is one of the most dangerous jobs for adolescents. Through a university-community partnership, the authors surveyed young primarily acculturated Latino-American farmworkers 14 to 18 years of age regarding their agricultural work experience. Topics included occupational health and safety education, work history, and information sources. The authors also evaluated the Rapid Clinical Assessment Tool (RCAT), a pictorial tool for identifying agricultural tasks to enhance discussion with clinical providers. One hundred forty youth with farmwork experience completed the survey; 6% reported a previous work-related injury or illness and 53% reported receiving some workplace health and safety training. Correct identification of legally restricted duties for youth varied but were generally low: participants identified working alone past 8 pm (57%), driving a forklift (56%), doing roofing work (39%), working in freezers (34%), and driving a delivery vehicle (30%). The Internet was identified as the most likely and reliable place youth would go to find information on workplace health and safety. Few (15%) reported clinician-initiated conversations on occupational health; however, a high proportion responded positively to questions regarding the usefulness of the RCAT for this purpose. This study highlights the need for workplace health and safety guidance for youth employed in agriculture. The results support Internet-based outreach and use of the RCAT to help facilitate occupational health discussions in clinical settings.

  11. Nanomaterials: new challenges in environmental health and safety

    International Nuclear Information System (INIS)

    Sun, Casper; Gallaghar, Robert G.

    2008-01-01

    A follow-up of the Nano-panel discussion in the 41 st Midyear Health Physics Society (HPS) meeting, Oakland CA, 'Accelerators and Nanoparticles' have been introduced to and discussed among participants, i.e., health physicists, especially within the topic that monitoring and measurement of nano-radioactive materials. It is documented clearly that the chemistry and physical mobility and optical properties, and the monitoring and protection requirements for nano-radioactive substances vary observed from collective experiences. Soon after nanocarbon-tube discovery and use of the innovated materials expand, as nanoscience and nanotechnogy, exponential globally and revolutionized in just about every industries, for examples, agricultural, chemical, biological, pharmaceutical, medical, electronic, green-energies. To produce individual desired benefits, the engineered tiny substances could add health risk inevitably to the workers and consumers. The environmental health and safety (EH and S) research budgets and awareness programs have been steady increased in according with National Nanotechnology Initiative (NNI) report. All nanoscale materials which they have virtually invisible and yet can penetrate and deposit on cell walls of living organs and tissues without being detected once inhaled or ingested in the body, the handling and application of these materials with associated hazard in terms of occupational and environment risk must be identified, investigated, and documented before any of damage or vulnerability revealed. In the other words, be prepared then sorry. Many common properties and risk issues are identical or very similar between radioactive and nanoscale materials. Both are exist naturally and will persist. What is and is not a problem, must be clearly understood to support operational and protection decision making. The safety data must be provided in Internet transparently and voluntarily. All nanomaterials should consider as hazard before proofed. The

  12. 75 FR 66797 - National Advisory Committee on Occupational Safety and Health (NACOSH), Charter Renewal

    Science.gov (United States)

    2010-10-29

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0012] National Advisory Committee on Occupational Safety and Health (NACOSH), Charter Renewal AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Notice of renewal of the NACOSH charter...

  13. An innovative approach to interdisciplinary occupational safety and health education.

    Science.gov (United States)

    Rosen, Mitchel A; Caravanos, Jack; Milek, Debra; Udasin, Iris

    2011-07-01

    The New York and New Jersey Education and Research Center (ERC) provides a range of graduate continuing education for occupational safety and health (OSH) professionals in training. A key element of the education is to provide interdisciplinary training to industrial hygienists, ergonomists, occupational medicine physicians and other health and safety trainees to prepare them for the collaboration required to solve the complex occupational health and safety problems they will face in their careers. This center has developed an innovative interdisciplinary training approach that provides an historical aspect, while allowing the graduate students to identify solutions to occupational issues from a multi-disciplinary approach. The ERC developed a tour that brings students to sites of historical and/or contemporary significance in the occupational safety and health and environmental fields. The ERC has conducted five tours, and has included 85 students and residents as participants. 80% of participants rated the tour as providing a high amount of OSH knowledge gained. 98% of the participants felt the goal of providing interdisciplinary education was achieved. This tour has been successful in bridging the OSH fields to better understand how occupational and environmental exposures have occurred, in order to prevent future exposures so that workplace conditions and health can be improved. Copyright © 2011 Wiley-Liss, Inc.

  14. Organisational learning and continuous improvement of health and safety in certified manufacturers

    DEFF Research Database (Denmark)

    Granerud, Lise; Rocha, Robson Sø

    2011-01-01

    and raise goals within health and safety on a continuous basis. The article examines how certified occupational and health management systems influence this process to evaluate how far they hinder or support learning. It presents a model with which it is possible to identify and analyse improvement......Certified management systems have increasingly been applied by firms in recent decades and now cover the management of health and safety, principally through the OHSAS 18001 standard. In order to become certified, firms must not only observe the relevant legislation, but also improve performance...... processes. The model is applied to five cases from a qualitative study of Danish manufacturers with certified health and safety management systems. The cases illustrate the wide variation in health and safety management among certified firms. Certification is found to support lower levels of continuous...

  15. Passenger safety, health, and comfort: a review.

    Science.gov (United States)

    Rayman, R B

    1997-05-01

    Since the birth of aviation medicine approximately 80 yrs ago, practitioners and scientists have given their attention primarily to flight deck crew, cabin crew, and ground support personnel. However, in more recent years we have broadened our horizons to include the safety, health, and comfort of passengers flying commercial aircraft. This will be even more compelling as more passengers take to the air in larger aircraft and flying longer hours to more distant destinations. Further, we can expect to see more older passengers because people in many countries are living longer, healthier lives. The author first discusses the stresses imposed by ordinary commercial flight upon travelers such as airport tumult, barometric pressure changes, immobility, jet lag, noise/ vibration, and radiation. Medical considerations are next addressed describing inflight illness and medical care capability aboard U.S. air carriers. Passenger safety, cabin air quality, and the preventive medicine aspects of air travel are next reviewed in the context of passenger safety, health, and comfort. Recommendations are addressed to regulator agencies, airlines aircraft manufacturers, and the aerospace medicine community.

  16. Occupational health and safety issues among nurses in the Philippines.

    Science.gov (United States)

    de Castro, A B; Cabrera, Suzanne L; Gee, Gilbert C; Fujishiro, Kaori; Tagalog, Eularito A

    2009-04-01

    Nursing is a hazardous occupation in the United States, but little is known about workplace health and safety issues facing the nursing work force in the Philippines. In this article, work-related problems among a sample of nurses in the Philippines are described. Cross-sectional data were collected through a self-administered survey during the Philippine Nurses Association 2007 convention. Measures included four categories: work-related demographics, occupational injury/illness, reporting behavior, and safety concerns. Approximately 40% of nurses had experienced at least one injury or illness in the past year, and 80% had experienced back pain. Most who had an injury did not report it. The top ranking concerns were stress and overwork. Filipino nurses encounter considerable health and safety concerns that are similar to those encountered by nurses in other countries. Future research should examine the work organization factors that contribute to these concerns and strengthen policies to promote health and safety.

  17. Occupational Health and Safety Issues Among Nurses in the Philippines

    Science.gov (United States)

    de Castro, A. B.; Cabrera, Suzanne L.; Gee, Gilbert C.; Fujishiro, Kaori; Tagalog, Eularito A.

    2009-01-01

    Nursing is a hazardous occupation in the United States, but little is known about workplace health and safety issues facing the nursing work force in the Philippines. In this article, work-related problems among a sample of nurses in the Philippines are described. Cross-sectional data were collected through a self-administered survey during the Philippine Nurses Association 2007 convention. Measures included four categories: work-related demographics, occupational injury/illness, reporting behavior, and safety concerns. Approximately 40% of nurses had experienced at least one injury or illness in the past year, and 80% had experienced back pain. Most who had an injury did not report it. The top ranking concerns were stress and overwork. Filipino nurses encounter considerable health and safety concerns that are similar to those encountered by nurses in other countries. Future research should examine the work organization factors that contribute to these concerns and strengthen policies to promote health and safety. PMID:19438081

  18. PUREX Deactivation Health and Safety documentation

    International Nuclear Information System (INIS)

    Dodd, E.N. III.

    1995-01-01

    The purpose of the PUREX Deactivation Project is to establish a passively safe and environmentally secure configuration of PUREX at the Hanford Site, and to preserve that configuration for a 10-year horizon. The 10-year horizon is used to predict future maintenance requirements and represents they typical time duration expended to define, authorize, and initiate the follow-on Decontamination and Decommissioning (D ampersand D) activities. This document was prepared to increase attention to worker safety issues during the deactivation project and, as such, identifies the documentation and programs associated with PUREX Deactivation Health and Safety

  19. Urban health in daily practice: livelihood, vulnerability and resilience in Dar es Salaam, Tanzania.

    Science.gov (United States)

    Obrist, Brigit

    2003-12-01

    Health is the core value and ultimate goal of health development, yet we know very little about health conceptions in everyday life. Inspired by investigations into lay health concepts in Europe, our study explores experiences and meanings of health in a strikingly different context, namely, in a low-income neighbourhood of an African city. Grounded in ethnographic research in Dar es Salaam, we introduce the concept of 'health practice' and examine health definitions, explanations, and activities of urban Swahili women. Our findings show that representations of health form a set of experiences, meanings and embodied practice centring on the links between body, mind, and living conditions. We suggest that 'livelihood', 'vulnerability' and 'resilience' best capture women's main concerns of health practice in such a setting. All women face an emotional burden of being exposed to urban afflictions and an intellectual and practical burden of overcoming them, but some meet this challenge more successfully than others do. This approach tips the balance towards a positive view of health that has been neglected in medical anthropology. It also opens new lines of inquiry in urban health research by consequently following a resource orientation that acknowledges women's struggle to stay healthy and directs attention to their agency.

  20. 78 FR 12065 - National Institute for Occupational Safety and Health Personal Protective Technology for...

    Science.gov (United States)

    2013-02-21

    ... Institute for Occupational Safety and Health Personal Protective Technology for Pesticide Handlers: Stakeholder Meeting AGENCY: The National Institute for Occupational Safety and Health (NIOSH) of the Centers...: Notice of public meeting. SUMMARY: The National Institute for Occupational Safety and Health (NIOSH) of...

  1. A model of Occupational Safety and Health Management System (OSHMS) for promoting and controlling health and safety in textile industry.

    Science.gov (United States)

    Manimaran, S; Rajalakshmi, R; Bhagyalakshmi, K

    2015-01-01

    The development of Occupational Safety and Health Management System in textile industry will rejuvenate the workers and energize the economy as a whole. In India, especially in Tamil Nadu, approximately 1371 textile business is running with the help of 38,461 workers under Ginning, Spinning, Weaving, Garment and Dyeing sectors. Textile industry of contributes to the growth of Indian economy but it fails to foster education and health as key components of human development and help new democracies. The present work attempts to measure and develop OSHMS which reduce the hazards and risk involved in textile industry. Among all other industries textile industry is affected by enormous hazards and risk because of negligence by management and Government. It is evident that managements are not abiding by law when an accident has occurred. Managements are easily deceiving workers and least bothered about the Quality of Work Life (QWL). A detailed analysis of factors promoting safety and health to the workers has been done by performing confirmatory factor analysis, evaluating Risk Priority Number and the framework of OHMS has been conceptualized using Structural Equation Model. The data have been collected using questionnaire and interview method. The study finds occupation health for worker in Textile industry is affected not only by safety measure but also by technology and management. The work shows that difficulty in identifying the cause and effect of hazards, the influence of management in controlling and promoting OSHMS under various dimensions. One startling fact is existence of very low and insignificance correlation between health factors and outcome.

  2. EFFICACY AND SAFETY OF THE INFLUENZA VACCINE AMONG CHILDREN WITH DIFFERENT HEALTH CONDITIONS

    OpenAIRE

    M.G. Galitskaya

    2007-01-01

    Efficacy and safety of vaccine «Grippol» among children with different health status was analyzed. The most efficacy of the influenza vaccine revealed in the group of children with compromised health status, as well as in the group of allergic children. The safety of influenza vaccination was confirmed in children with different health conditions.Key words: children, vaccination, influenza, efficacy, safety.

  3. The link between workforce health and safety and the health of the bottom line: tracking market performance of companies that nurture a "culture of health".

    Science.gov (United States)

    Fabius, Raymond; Thayer, R Dixon; Konicki, Doris L; Yarborough, Charles M; Peterson, Kent W; Isaac, Fikry; Loeppke, Ronald R; Eisenberg, Barry S; Dreger, Marianne

    2013-09-01

    To test the hypothesis that comprehensive efforts to reduce a workforce's health and safety risks can be associated with a company's stock market performance. Stock market performance of Corporate Health Achievement Award winners was tracked under four different scenarios using simulation and past market performance. A portfolio of companies recognized as award winning for their approach to the health and safety of their workforce outperformed the market. Evidence seems to support that building cultures of health and safety provides a competitive advantage in the marketplace. This research may have also identified an association between companies that focus on health and safety and companies that manage other aspects of their business equally well. Companies that build a culture of health by focusing on the well-being and safety of their workforce yield greater value for their investors.

  4. SRS ES ampersand H standards compliance program management plan

    International Nuclear Information System (INIS)

    Hearn, W.H.

    1993-01-01

    On March 8, 1990, the Defense Nuclear Facilities Safety Board (DNFSB) issued Recommendation 90-2 to the Secretary of Energy. This recommendation, based upon the DNFSB's initial review and evaluation of the content and implementation of standards relating to the design, construction, operations, and decommissioning of defense nuclear facilities of the Department of Energy (DOE), called for three actions: (1) identification of specific standards that apply to design, construction, operation and decommissioning of DOE facilities; (2) assessment of the adequacy of those standards for protecting public health and safety; and (3) determination of the extent to which they have and are being implemented. This document defines the elements of the SRS program required to support the HQ program in response to DNFSB Recommendation 90-2. The objective is to ensure a consistent approach for all sitewide ES and H Standards Compliance Program efforts that satisfied the intent of Recommendation 90-2 and the HQ 90-2 Implementation Plan in a cost-effective manner. The methodology and instructions for implementation of the SRS program are contained in the Standards Compliance Program Implementation Plan. The Management Plan shall be used in conjunction with the Implementation Plan

  5. Examining occupational health and safety vulnerability among Canadian workers with disabilities.

    Science.gov (United States)

    Breslin, F Curtis; Lay, A Morgan; Jetha, Arif; Smith, Peter

    2017-05-26

    To compare workers with and without disabilities on their reported workplace hazard exposure and the presence of occupational health and safety vulnerability factors. Working-aged adults in Ontario or British Columbia were recruited to participate in a cross-sectional survey (n = 1988). Self-reported measures included demographic factors, work-related variables, perceived level of activity limitation at work, and presence of work safety vulnerability factors utilizing a novel framework. Reporting a disability at work was significantly associated with greater hazard exposure than those without a disability. In addition, those reporting a disability at work were more likely to be employed in conditions where hazard exposure was combined with inadequate policies and procedures, or hazard exposures were combined with inadequate empowerment. Work safety vulnerability is one way that health inequalities can be perpetuated even among those with disabilities who have found work. Our results suggest that employers and policy makers need to focus on assessing and addressing hazard exposures and targeting occupational health and safety resources in the workplace in a way that includes workers with disabilities. Implications for Rehabilitation Workers with disabilities experience greater hazard exposure than those without a disability. Those with moderate and severe disabilities reported occupational health and safety vulnerability, suggesting that workplace accommodations should be available to a broader range of disability levels. It appears that, above and beyond standard safety procedures, providing workplace accommodations for people with disabilities may further reduce their hazard exposure and improve their safety.

  6. Health and safety record of the nuclear industry

    International Nuclear Information System (INIS)

    Carter, M.W.; Carruthers, E.; Button, J.C.E.

    1975-09-01

    This paper examines the claim of the nuclear industry to have an excellent safety record, in terms of health and accident records of workers in the industry. It does not consider accidents which have not resulted in harm to the workers' health. The nuclear industry is considered to include all work with ionising radiations and radioactive materials, in education, research, medicine and industry. Since 'safety' is not an absolute concept, comparisons are made with the published records of other industries, and a study is made of the performance of the nuclear industry in relation to its own safety criteria. Data are presented on the radiation exposure of nuclear workers in Europe, America, India and Australia, in relation to the internationally recommended limits, and there is some discussion of the risks involved in these limits. The death rate in parts of the nuclear industry in America, the United Kingdom, and Australia is presented and compared with the death rate for other industries in those countries, and a listing is made of deaths caused by radiation in the period 1945 to 1968. Injury rates for the US and Australian nuclear industries are also compared with the injury rates for other industries in these countries. Consideration is given to the safety record of individual components of the nuclear industry (using the wide definition of this industry given above), special attention being given to health records of uranium miners, plutonium workers and radiologists. Although there are difficulties in obtaining sufficiently detailed information of this kind it is considered that the data presented, relative to any reasonable standard, demonstrate that the nuclear industry has a safety record to be proud of. (author)

  7. Safety culture perceptions of pharmacists in Malaysian hospitals and health clinics: a multicentre assessment using the Safety Attitudes Questionnaire

    Science.gov (United States)

    Samsuri, Srima Elina; Pei Lin, Lua; Fahrni, Mathumalar Loganathan

    2015-01-01

    Objective To assess the safety attitudes of pharmacists, provide a profile of their domains of safety attitude and correlate their attitudes with self-reported rates of medication errors. Design A cross-sectional study utilising the Safety Attitudes Questionnaire (SAQ). Setting 3 public hospitals and 27 health clinics. Participants 117 pharmacists. Main outcome measure(s) Safety culture mean scores, variation in scores across working units and between hospitals versus health clinics, predictors of safety culture, and medication errors and their correlation. Results Response rate was 83.6% (117 valid questionnaires returned). Stress recognition (73.0±20.4) and working condition (54.8±17.4) received the highest and lowest mean scores, respectively. Pharmacists exhibited positive attitudes towards: stress recognition (58.1%), job satisfaction (46.2%), teamwork climate (38.5%), safety climate (33.3%), perception of management (29.9%) and working condition (15.4%). With the exception of stress recognition, those who worked in health clinics scored higher than those in hospitals (psafety culture. As perceptions improved, the number of medication errors reported decreased. Group-specific interventions that target specific domains are necessary to improve the safety culture. PMID:26610761

  8. Impact of organisational characteristics on health and safety ...

    African Journals Online (AJOL)

    The construction industry makes a contribution to occupational accidents and ill health records in Nigeria. This study was designed to evaluate the impact of organisational characteristics on health and safety (H&S) management practices of Nigerian small and medium-sized construction enterprises (SMEs). The study ...

  9. 29 CFR 1902.6 - Consultation with the National Institute for Occupational Safety and Health.

    Science.gov (United States)

    2010-07-01

    ... Safety and Health. 1902.6 Section 1902.6 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... Occupational Safety and Health. The Assistant Secretary will consult, as appropriate, with the Director of the National Institute for Occupational Safety and Health with regard to plans submitted by the States under...

  10. Occupational Safety and Health Act: A Responsibility for Science Teachers

    Science.gov (United States)

    Science Teacher, 1974

    1974-01-01

    Presents implications of the Occupational Safety and Health Act for science teachers both as workers and as they encourage, in students, the development of positive safety attitudes for future occupations. (PEB)

  11. Recommendations from the Health and Safety at Work Sub-Committee

    Science.gov (United States)

    Education in Science, 1976

    1976-01-01

    Provides additional recommendations as the Health and Safety at Work Act of 1974 applies to the storage of flammable liquids, provision of safety equipment, responsibility for technicians and faulty apparatus. (GS)

  12. Multidisciplinary training program to create new breed of radiation monitor: the health and safety technician

    International Nuclear Information System (INIS)

    Vance, W.F.

    1979-01-01

    A multidiscipline training program established to create a new monitor, theHealth and Safety Technician, is described. The training program includes instruction in fire safety, explosives safety, industrial hygiene, industrial safety, health physics, and general safety practices

  13. Work, obesity, and occupational safety and health.

    Science.gov (United States)

    Schulte, Paul A; Wagner, Gregory R; Ostry, Aleck; Blanciforti, Laura A; Cutlip, Robert G; Krajnak, Kristine M; Luster, Michael; Munson, Albert E; O'Callaghan, James P; Parks, Christine G; Simeonova, Petia P; Miller, Diane B

    2007-03-01

    There is increasing evidence that obesity and overweight may be related, in part, to adverse work conditions. In particular, the risk of obesity may increase in high-demand, low-control work environments, and for those who work long hours. In addition, obesity may modify the risk for vibration-induced injury and certain occupational musculoskeletal disorders. We hypothesized that obesity may also be a co-risk factor for the development of occupational asthma and cardiovascular disease that and it may modify the worker's response to occupational stress, immune response to chemical exposures, and risk of disease from occupational neurotoxins. We developed 5 conceptual models of the interrelationship of work, obesity, and occupational safety and health and highlighted the ethical, legal, and social issues related to fuller consideration of obesity's role in occupational health and safety.

  14. Biomonitoring at the UK Health and Safety Laboratory.

    Science.gov (United States)

    Cocker, J; Jones, K; Morton, J; Mason, H J

    2007-05-01

    The UK Health and Safety Laboratory (HSL) provides research and analytical support to the Health and Safety Executive, other Government Departments and employers. In the area of biomonitoring HSL conducts research studies and provides an analytical service for regular surveillance of worker exposure to hazardous substances. This paper gives brief examples of how data from such studies can be used to develop biological monitoring guidance values for isocyanates, polycyclic aromatic hydrocarbons and hexavalent chromium. In addition, a study of occupational exposure to copper chrome arsenic wood preservatives is briefly described to show how biological monitoring can be used for post-approval surveillance of a biocide.

  15. Mobile phones and health, stakeholder perspectives: occupational health and safety

    International Nuclear Information System (INIS)

    Benke, G.

    2001-01-01

    The use of mobile phones for business and social purposes has attracted concerns regarding possible health impacts. Their use in the workplace has potential for significant exposure. In this paper I outline the role of the occupational health and safety (OHS) professional and the way hazard, risk and dose are defined in the workplace. Also discussed are the other important aspects that need to be considered with exposure to radio-frequency radiation (RFR) from mobile phone exposure in the workplace and current concerns about the possible health effects from workplace exposure. Copyright (2001) Australasian Radiation Protection Society Inc

  16. Annual health, safety and environmental performance report for 1993

    Energy Technology Data Exchange (ETDEWEB)

    Gallapher, J D; Wright, M G

    1994-05-01

    This report summarizes the occupational health and safety and the environmental protection record of the operations of Atomic Energy of Canada Limited (AECL) during 1993. An introduction highlights the results and describes the facilities and organizational systems. Subsequent sections indicate the performance of the company with respect to personnel radiation exposures, occupational injuries, the handling of wastes, and the release of materials into the environment. Programs in health, safety and environmental protection are presented, along with site remediation and emergency preparedness practices. (author). 14 figs.

  17. Annual health, safety and environmental performance report for 1993

    International Nuclear Information System (INIS)

    Gallapher, J.D.; Wright, M.G.

    1994-05-01

    This report summarizes the occupational health and safety and the environmental protection record of the operations of Atomic Energy of Canada Limited (AECL) during 1993. An introduction highlights the results and describes the facilities and organizational systems. Subsequent sections indicate the performance of the company with respect to personnel radiation exposures, occupational injuries, the handling of wastes, and the release of materials into the environment. Programs in health, safety and environmental protection are presented, along with site remediation and emergency preparedness practices. (author). 14 figs

  18. Natural antioxidants in functional foods: from food safety to health benefits

    Directory of Open Access Journals (Sweden)

    Nieto, Susana

    2003-09-01

    Full Text Available Oxygen is essential for metabolism but it may be highly damaging for both organisms and foods unless properly controlled. Among uncontrolled detrimental processes lipid oxidation (or oxidative rancidity is one of the most relevant. Oxidative rancidity of foods is initiated by reactive oxygen species (ROS. ROS are also formed in living organisms as consequence of metabolic activity with potentially sided effects, though a certain physiological level of ROS is crucial for the regulation of cell functions. Oxidative stress is defined as a disturbance in the pro-oxidant/anti-oxidant balance and antioxidants of synthetic or natural origin may have an important role in the maintenance of this balance. Synthetic antioxidants are widely used in the food industry, however concerns about their safety have changed the interest to natural antioxidants which are presumed to be safe. Natural antioxidants such as tocopherols, ascorbic acid, rosemary extracts, lycopene and some flavonoids are now available to be added to foods in replacement of synthetic products. These antioxidants may reinforce the activity of the endogenous antioxidant systems providing extra protection against oxidative stress. Food preserved with added natural antioxidants can be considered as functional foods because these products can provide better health conditions to consumer.El oxígeno es un metabolito esencial para la vida. Sin embargo puede ser altamente dañino para el organismo y para los alimentos que consumimos si su actividad no es controlada. Uno de los efectos mas deteriorativos del oxígeno es la oxidación de los lípidos o rancidez oxidativa. Este es un proceso que en los alimentos es iniciado por las llamadas especies reactivas del oxígeno (ROS, las que también se pueden formar en los organismos vivos como consecuencia de la actividad metabólica de estos, con efectos graves para estos organismos. Ciertos procesos metabólicos requieren de la participación de los ROS

  19. Technical safety appraisal of the Idaho Chemical Processing Plant

    International Nuclear Information System (INIS)

    1992-05-01

    On June 27, 1989, Secretary of Energy, Admiral James D. Watkins, US Navy (Retired), announced a 10-point initiative to strengthen environment, safety, and health (ES ampersand H) programs and waste management operations in the Department of Energy (DOE). One of the initiatives involved conducting independent Tiger Team Assessments (TTA) at DOE operating facilities. A TTA of the Idaho National Engineering Laboratory (INEL) was performed during June and July 1991. Technical Safety Appraisals (TSA) were conducted in conjunction with the TTA as its Safety and Health portion. However, because of operational constraints the the Idaho Chemical Processing Plant (ICPP), operated for the DOE by Westinghouse Idaho Nuclear Company, Inc. (WINCO), was not included in the Safety and Health Subteam assessment at that time. This TSA, conducted April 12 - May 8, 1992, was performed by the DOE Office of Performance Assessment to complete the normal scope of the Safety and Health portion of the Tiger Team Assessment of the Idaho National Engineering Laboratory. The purpose of TSAs is to evaluate and strengthen DOE operations by verifying contractor compliance with DOE Orders, to assure that lessons learned from commercial operations are incorporated into facility operations, and to stimulate and encourage pursuit of excellence; thus, the appraisal addresses more issues than would be addressed in a strictly compliance-oriented appraisal. A total of 139 Performance Objectives have been addressed by this appraisal in 19 subject areas. These 19 areas are: organization and administration, quality verification, operations, maintenance, training and certification, auxiliary systems, emergency preparedness, technical support, packaging and transportation, nuclear criticality safety, safety/security interface, experimental activities, site/facility safety review, radiological protection, worker safety and health compliance, personnel protection, fire protection, medical services and natural

  20. Framework for Continuous Assessment and Improvement of Occupational Health and Safety Issues in Construction Companies

    OpenAIRE

    Mahmoudi, Shahram; Ghasemi, Fakhradin; Mohammadfam, Iraj; Soleimani, Esmaeil

    2014-01-01

    Background: Construction industry is among the most hazardous industries, and needs a comprehensive and simple-to-administer tool to continuously assess and promote its health and safety performance. Methods: Through the study of various standard systems (mainly Health, Safety, and Environment Management System; Occupational Health and Safety Assessment Series 180001; and British Standard, occupational health and safety management systems-Guide 8800), seven main elements were determined fo...

  1. Plutonium working group report on environmental, safety and health vulnerabilities associated with the Department's plutonium storage. Volume II, Appendix B, Part 8: Argonne National Laboratory - East and New Brunswick Laboratory site assessment team report

    International Nuclear Information System (INIS)

    1994-09-01

    The objective of the Plutonium ES ampersand H Vulnerability Assessment Project is to conduct a comprehensive assessment of the environmental, safety and health (ES ampersand H) vulnerabilities arising from the Department's storage and handling of Its current plutonium holdings. The term open-quote ES ampersand H vulnerabilitiesclose quotes is defined for the purpose of this project to mean conditions or weaknesses that could lead to unnecessary or increased radiation exposure of workers, release of radioactive materials to the environment, or radiation exposure of the public. The assessment will identify and prioritize ES ampersand H vulnerabilities, and will serve as an information base for identifying corrective actions and options for the safe management of fissile materials. The Argonne National Laboratory-East (ANL-E) Site Assessment Team (SAT) was formed from Department of Energy (DOE) Chicago Operations Office-Argonne Area Office Personnel, to conduct a self-assessment of the plutonium holdings and any associated ES ampersand H vulnerabilities at the ANL-E site

  2. Five Topics Health Care Simulation Can Address to Improve Patient Safety

    DEFF Research Database (Denmark)

    Sollid, Stephen J M; Dieckman, Peter; Aase, Karina

    2017-01-01

    OBJECTIVES: There is little knowledge about which elements of health care simulation are most effective in improving patient safety. When empirical evidence is lacking, a consensus statement can help define priorities in, for example, education and research. A consensus process was therefore...... initiated to define priorities in health care simulation that contribute the most to improve patient safety.  METHODS: An international group of experts took part in a 4-stage consensus process based on a modified nominal group technique. Stages 1 to 3 were based on electronic communication; stage 4 was a 2......-day consensus meeting at the Utstein Abbey in Norway. The goals of stage 4 were to agree on the top 5 topics in health care simulation that contribute the most to patient safety, identify the patient safety problems they relate to, and suggest solutions with implementation strategies...

  3. Increasing compliance with the World Health Organization Surgical Safety Checklist-A regional health system's experience.

    Science.gov (United States)

    Gitelis, Matthew E; Kaczynski, Adelaide; Shear, Torin; Deshur, Mark; Beig, Mohammad; Sefa, Meredith; Silverstein, Jonathan; Ujiki, Michael

    2017-07-01

    In 2009, NorthShore University HealthSystem adapted the World Health Organization Surgical Safety Checklist (SSC) at each of its 4 hospitals. Despite evidence that SSC reduces intraoperative mistakes and increase patient safety, compliance was found to be low with the paper form. In November 2013, NorthShore integrated the SSC into the electronic health record (EHR). The aim was to increase communication between operating room (OR) personnel and to encourage best practices during the natural workflow of surgeons, anesthesiologists, and nurses. The purpose of this study was to examine the impact of an electronic SSC on compliance and patient safety. An anonymous OR observer selected cases at random and evaluated the compliance rate before the rollout of the electronic SSC. In June 2014, an electronic audit was performed to assess the compliance rate. Random OR observations were also performed throughout the summer in 2014. Perioperative risk events, such as consent issues, incorrect counts, wrong site, and wrong procedure were compared before and after the electronic SSC rollout. A perception survey was also administered to NorthShore OR personnel. Compliance increased from 48% (n = 167) to 92% (n = 1,037; P World Health Organization SSC is a validated tool to increase patient safety and reduce intraoperative complications. The electronic SSC has demonstrated an increased compliance rate, a reduced number of risk events, and most OR personnel believe it will have a positive impact on patient safety. Copyright © 2016 Elsevier Inc. All rights reserved.

  4. Environment Health & Safety Research Program. Organization and 1979-1980 Publications

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-01-01

    This document was prepared to assist readers in understanding the organization of Pacific Northwest Laboratory, and the organization and functions of the Environment, Health and Safety Research Program Office. Telephone numbers of the principal management staff are provided. Also included is a list of 1979 and 1980 publications reporting on work performed in the Environment, Health and Safety Research Program, as well as a list of papers submitted for publication.

  5. A model for managing cold-related health and safety risks at workplaces.

    Science.gov (United States)

    Risikko, Tanja; Mäkinen, Tiina M; Påsche, Arvid; Toivonen, Liisa; Hassi, Juhani

    2003-05-01

    Cold conditions increase health and safety risks at work in several ways. The effects of cold have not been sufficiently taken into consideration in occupational safety and health practices. A systematic model and methods were developed for managing cold-related health and safety risks at workplaces. The development work was performed, in a context-bound manner, in pilot industries and workplaces. The model can be integrated into the company's occupational health and safety management system, such as OHSAS 18001. The cold risks are identified and assessed by using a checklist. The preventive measures are systematically planned in a written form specifically produced for cold workplaces. It includes the organisational and technical preventive measures, protective clothing and personal protective equipment, as well as training and information of the personnel. According to the model, all the workers, foremen, occupational safety personnel and occupational health care personnel are trained to recognise the cold risks and to conduct preventive actions. The developed model was evaluated in the context of cold outdoor (construction) and indoor work (fish processing), and by occupational health and safety professionals. According to the feedback, the model and methods were easy to use after a one-day introduction session. The continuum between the cold risk assessment and management worked well, although there was some overlap in the documentation. The cold risk management model and its methods form an essential part of ISO CD 15743 Strategy for risk assessment, management and work practice in cold environments.

  6. A Systematic Review of Community Health Workers' Role in Occupational Safety and Health Research.

    Science.gov (United States)

    Swanberg, Jennifer E; Nichols, Helen M; Clouser, Jessica M; Check, Pietra; Edwards, Lori; Bush, Ashley M; Padilla, Yancy; Betz, Gail

    2018-03-03

    We systematically reviewed the literature to describe how community health workers (CHWs) are involved in occupational health and safety research and to identify areas for future research and research practice strategies. We searched five electronic databases from July 2015 through July 2016. Inclusion criteria were as follows: (1) study took place in the United States, (2) published as a full peer-review manuscript in English, (3) conducted occupational health and safety research, and (4) CHWs were involved in the research. The majority of 17 included studies took place in the agriculture industry (76%). CHWs were often involved in study implementation/design and research participant contact. Rationale for CHW involvement in research was due to local connections/acceptance, existing knowledge/skills, communication ability, and access to participants. Barriers to CHW involvement in research included competing demands on CHWs, recruitment and training difficulties, problems about research rigor and issues with proper data collection. Involving CHWs in occupational health and safety research has potential for improving inclusion of diverse, vulnerable and geographically isolated populations. Further research is needed to assess the challenges and opportunities of involving CHWs in this research and to develop evidence-based training strategies to teach CHWs to be lay-health researchers.

  7. Sanitation health risk and safety planning in urban residential ...

    African Journals Online (AJOL)

    The aim of this review paper was to determine the best sanitation health risk and safety planning approach for sustainable management of urban environment. This was achieved by reviewing the concept of sanitation safety planning as a tool. The review adopted exploratory research approach and used secondary data ...

  8. Health and safety of older nurses.

    Science.gov (United States)

    Letvak, Susan

    2005-01-01

    The nursing workforce is aging at an unprecedented rate yet little is known about the health and safety of older registered nurses (RNs). The survey reported here examined the relationships between demographic variables, job attributes (job satisfaction, control over practice, and job demands) and the physical and mental health and job-related injuries and health disorders of 308 nurses over the age of 50. Findings indicate that nurses with higher job satisfaction, higher control over practice, and lower job demands experienced increased physical health. Increasing age was positively correlated with mental health. Almost a quarter of older RNs experienced a job-related injury within the past 5 years, and over a third experienced job-related health problems. Nurses with higher job demands and those employed in hospital settings were more likely to have an injury. Overall, older RNs reported higher levels of physical and mental health than the national norm. Efforts must be made to keep older RNs healthy so we can retain them in the workforce.

  9. Management capacity to promote nurse workplace health and safety.

    Science.gov (United States)

    Fang, Yaxuan; McDonald, Tracey

    2018-04-01

    To investigate regarding workplace health and safety factors, and to identify strategies to preserve and promote a healthy nursing workplace. Data collected using the Delphi technique with input from 41 key informants across four participant categories drawn from a Chinese university and four hospitals were thematically analysed. Most respondents agreed on the importance of nurses' health and safety, and that nurse managers should act to protect nurses, but not enough on workplace safety. Hospital policies, staff disempowerment, workload and workplace conflicts are major obstacles. The reality of Chinese nurses' workplaces is that health and safety risks abound and relate to socio-cultural expectations of women. Self-management of risks is neccessary, gaps exist in understanding of workplace risks among different nursing groups and their perceptions of the professional status, and the value of nurses' contribution to ongoing risks in the hospital workplace. The Chinese hospital system must make these changes to produce a safer working environment for nurses. This research, based in China, presents an instructive tale for all countries that need support on the types and amounts of management for nurses working at the clinical interface, and on the consequences of management neglect of relevant policies and procedures. © 2017 John Wiley & Sons Ltd.

  10. Usability Methods for Ensuring Health Information Technology Safety: Evidence-Based Approaches. Contribution of the IMIA Working Group Health Informatics for Patient Safety.

    Science.gov (United States)

    Borycki, E; Kushniruk, A; Nohr, C; Takeda, H; Kuwata, S; Carvalho, C; Bainbridge, M; Kannry, J

    2013-01-01

    Issues related to lack of system usability and potential safety hazards continue to be reported in the health information technology (HIT) literature. Usability engineering methods are increasingly used to ensure improved system usability and they are also beginning to be applied more widely for ensuring the safety of HIT applications. These methods are being used in the design and implementation of many HIT systems. In this paper we describe evidence-based approaches to applying usability engineering methods. A multi-phased approach to ensuring system usability and safety in healthcare is described. Usability inspection methods are first described including the development of evidence-based safety heuristics for HIT. Laboratory-based usability testing is then conducted under artificial conditions to test if a system has any base level usability problems that need to be corrected. Usability problems that are detected are corrected and then a new phase is initiated where the system is tested under more realistic conditions using clinical simulations. This phase may involve testing the system with simulated patients. Finally, an additional phase may be conducted, involving a naturalistic study of system use under real-world clinical conditions. The methods described have been employed in the analysis of the usability and safety of a wide range of HIT applications, including electronic health record systems, decision support systems and consumer health applications. It has been found that at least usability inspection and usability testing should be applied prior to the widespread release of HIT. However, wherever possible, additional layers of testing involving clinical simulations and a naturalistic evaluation will likely detect usability and safety issues that may not otherwise be detected prior to widespread system release. The framework presented in the paper can be applied in order to develop more usable and safer HIT, based on multiple layers of evidence.

  11. Evaluation of health and safety impacts of defense high-level waste in geologic repositories

    International Nuclear Information System (INIS)

    Smith, E.D.; Kocher, D.C.; Witherspoon, J.P.

    1985-02-01

    Pursuant to the requirement of the Nuclear Waste Policy Act of 1982 that the President evaluate the use of commercial high-level waste repositories for the disposal of defense high-level wastes, a comparative assessment has been performed of the potential health and safety impacts of disposal of defense wastes in commercial or defense-only repositories. Simplified models were used to make quantitative estimates of both long- and short-term health and safety impacts of several options for defense high-level waste disposal. The results indicate that potential health and safety impacts are not likely to vary significantly among the different disposal options for defense wastes. Estimated long-term health and safety impacts from all defense-waste disposal options are somewhat less than those from commercial waste disposal, while short-term health and safety impacts appear to be insensitive to the differences between defense and commercial wastes. In all cases, potential health and safety impacts are small because of the need to meet stringent standards promulgated by the US Environmental Protection Agency and the US Nuclear Regulatory Commission. We conclude that health and safety impacts should not be a significant factor in the choice of a disposal option for defense high-level wastes. 20 references, 14 tables

  12. 76 FR 1460 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH); Committee Reestablishment

    Science.gov (United States)

    2011-01-10

    ... duties imposed by the Occupational Safety and Health (OSH) Act of 1970 (29 U.S.C. 655, 656). Authority to...(b) of the Occupational Safety and Health Act of 1970 (29 U.S.C. 655(b)(1), 656(b)), the Federal... DEPARTMENT OF LABOR Occupational Safety and Health Administration Maritime Advisory Committee for...

  13. 29 CFR 2200.108 - Official Seal of the Occupational Safety and Health Review Commission.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Official Seal of the Occupational Safety and Health Review... Occupational Safety and Health Review Commission. The seal of the Commission shall consist of: A gold eagle... background, encircled by a white band edged in black and inscribed “Occupational Safety and Health Review...

  14. The impact of eHealth on the quality and safety of health care: a systematic overview.

    Science.gov (United States)

    Black, Ashly D; Car, Josip; Pagliari, Claudia; Anandan, Chantelle; Cresswell, Kathrin; Bokun, Tomislav; McKinstry, Brian; Procter, Rob; Majeed, Azeem; Sheikh, Aziz

    2011-01-18

    There is considerable international interest in exploiting the potential of digital solutions to enhance the quality and safety of health care. Implementations of transformative eHealth technologies are underway globally, often at very considerable cost. In order to assess the impact of eHealth solutions on the quality and safety of health care, and to inform policy decisions on eHealth deployments, we undertook a systematic review of systematic reviews assessing the effectiveness and consequences of various eHealth technologies on the quality and safety of care. We developed novel search strategies, conceptual maps of health care quality, safety, and eHealth interventions, and then systematically identified, scrutinised, and synthesised the systematic review literature. Major biomedical databases were searched to identify systematic reviews published between 1997 and 2010. Related theoretical, methodological, and technical material was also reviewed. We identified 53 systematic reviews that focused on assessing the impact of eHealth interventions on the quality and/or safety of health care and 55 supplementary systematic reviews providing relevant supportive information. This systematic review literature was found to be generally of substandard quality with regards to methodology, reporting, and utility. We thematically categorised eHealth technologies into three main areas: (1) storing, managing, and transmission of data; (2) clinical decision support; and (3) facilitating care from a distance. We found that despite support from policymakers, there was relatively little empirical evidence to substantiate many of the claims made in relation to these technologies. Whether the success of those relatively few solutions identified to improve quality and safety would continue if these were deployed beyond the contexts in which they were originally developed, has yet to be established. Importantly, best practice guidelines in effective development and deployment

  15. The impact of eHealth on the quality and safety of health care: a systematic overview.

    Directory of Open Access Journals (Sweden)

    Ashly D Black

    Full Text Available BACKGROUND: There is considerable international interest in exploiting the potential of digital solutions to enhance the quality and safety of health care. Implementations of transformative eHealth technologies are underway globally, often at very considerable cost. In order to assess the impact of eHealth solutions on the quality and safety of health care, and to inform policy decisions on eHealth deployments, we undertook a systematic review of systematic reviews assessing the effectiveness and consequences of various eHealth technologies on the quality and safety of care. METHODS AND FINDINGS: We developed novel search strategies, conceptual maps of health care quality, safety, and eHealth interventions, and then systematically identified, scrutinised, and synthesised the systematic review literature. Major biomedical databases were searched to identify systematic reviews published between 1997 and 2010. Related theoretical, methodological, and technical material was also reviewed. We identified 53 systematic reviews that focused on assessing the impact of eHealth interventions on the quality and/or safety of health care and 55 supplementary systematic reviews providing relevant supportive information. This systematic review literature was found to be generally of substandard quality with regards to methodology, reporting, and utility. We thematically categorised eHealth technologies into three main areas: (1 storing, managing, and transmission of data; (2 clinical decision support; and (3 facilitating care from a distance. We found that despite support from policymakers, there was relatively little empirical evidence to substantiate many of the claims made in relation to these technologies. Whether the success of those relatively few solutions identified to improve quality and safety would continue if these were deployed beyond the contexts in which they were originally developed, has yet to be established. Importantly, best practice

  16. Environment, Safety, Health and Waste Management Plan

    International Nuclear Information System (INIS)

    1988-01-01

    The mission of the Feed Materials Production Center (FMPC) is the production of high qaulity uranium metal for use by the US Department of Energy (DOE) in Defense Programs. In order to accomplish this mission and to maintain the FMPC as a viable facility in the DOE production complex, the facility must be brought into full compliance with all federal and state regulations and industry standards for environmental protection and worker safety. Where past practices have resulted in environmental insult, a comprehensive program of remediation must be implemented. The purpose of this combined Environment, Safety, Health and Waste Management Plan is to provide a road map for achieving needed improvements. The plan is structured to provide a comprehensive projection from the current fiscal year (FY) through FY 1994 of the programs, projects and funding required to achieve compliance. To do this, the plan is subdivided into chapters which discuss the applicable regulations;project schedules and funding requirements;details of the various programs for environment, safety, health and waste management;details of the ongoing National Environmental Policy Act (NEPA);the quality assurance program and the environmental monitoring program. 14 refs., 30 figs., 29 tabs

  17. Ecological Issues Related to Children's Health and Safety

    Science.gov (United States)

    Aldridge, Jerry; Kohler, Maxie

    2009-01-01

    Issues concerning the health and safety of children and youth occur at multiple levels. Bronfenbrenner (1995) proposed an ecological systems approach in which multiple systems interact to enhance or diminish children's development. The same systems are at work in health promotion. The authors present and review articles that reflect the multiple…

  18. EM Health and Safety Plan Guidelines

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-01

    This document contains information about the Health and Safety Plan Guidelines. Topics discussed include: Regulatory framework; key personnel; hazard assessment; training requirements; personal protective equipment; extreme temperature disorders or conditions; medical surveillance; exposure monitoring/air sampling; site control; decontamination; emergency response/contingency plan; emergency action plan; confined space entry; and spill containment.

  19. Utilization of mathematics amongst healthcare students towards problem solving during their occupational safety health internship

    Science.gov (United States)

    Umasenan a/l Thanikasalam

    2017-05-01

    Occupational safety health is a multidisciplinary discipline concentrating on the safety, health and welfare of workers in the working place. Healthcare Students undergoing Occupational Safety Health internships are required to apply mathematical in areas such as safety legislation, safety behavior, ergonomics, chemical safety, OSH practices, industrial hygiene, risk management and safety health practices as problem solving. The aim of this paper is to investigate the level of mathematics and logic utilization from these students during their internship looking at areas of Hazard identification, Determining the population exposed to the hazard, Assessing the risk of the exposure to the hazards and Taking preventive and control. A total of 142 returning healthcare students from their Occupational Safety Health, internship were given a questionnaire to measure their perceptions towards mathematical and logic utilization. The overall results indicated a strong positive skewed result towards the use of Mathematics during their internship. The findings showed that mathematics were well delivered by the students during their internship. Mathematics could not be separated from OSH practice as a needed precision in quantifying safety, health an d welfare of workers in addition to empiricism.

  20. Leveraging best practices to promote health, safety, sustainability, and stewardship.

    Science.gov (United States)

    Weiss, Marjorie D

    2013-08-01

    Strategically leveraging health and safety initiatives with sustainability and stewardship helps organizations improve profitability and positively impact team member and customer attachment to the organization. Collective efficacy enhances the triple bottom line: healthy people, healthy planet, and healthy profits. The HS(3)™ Best Practice Exchanges group demonstrated that collective efficacy can leverage the social cohesion, communication channels, and activities within workplaces to promote a healthy, sustainable work culture. This in turn (1) protects the health and safety of workers, (2) preserves the natural environment, and (3) increases attachment to the organization. Community-based participatory research using the Attach21 survey assessed the progress of these companies in their efforts to integrate health, safety, sustainability, and stewardship. Monthly Best Practice Exchanges promoted collective efficacy by providing support, encouragement, and motivation to share and adopt new ideas. Copyright 2013, SLACK Incorporated.

  1. Safety culture perceptions of pharmacists in Malaysian hospitals and health clinics: a multicentre assessment using the Safety Attitudes Questionnaire.

    Science.gov (United States)

    Samsuri, Srima Elina; Pei Lin, Lua; Fahrni, Mathumalar Loganathan

    2015-11-26

    To assess the safety attitudes of pharmacists, provide a profile of their domains of safety attitude and correlate their attitudes with self-reported rates of medication errors. A cross-sectional study utilising the Safety Attitudes Questionnaire (SAQ). 3 public hospitals and 27 health clinics. 117 pharmacists. Safety culture mean scores, variation in scores across working units and between hospitals versus health clinics, predictors of safety culture, and medication errors and their correlation. Response rate was 83.6% (117 valid questionnaires returned). Stress recognition (73.0±20.4) and working condition (54.8±17.4) received the highest and lowest mean scores, respectively. Pharmacists exhibited positive attitudes towards: stress recognition (58.1%), job satisfaction (46.2%), teamwork climate (38.5%), safety climate (33.3%), perception of management (29.9%) and working condition (15.4%). With the exception of stress recognition, those who worked in health clinics scored higher than those in hospitals (pculture. As perceptions improved, the number of medication errors reported decreased. Group-specific interventions that target specific domains are necessary to improve the safety culture. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  2. CONFORMITY TO OCCUPATIONAL SAFETY AND HEALTH REGULATIONS IN MALAYSIAN SMALL AND MEDIUM ENTERPRISES

    OpenAIRE

    Baba Md Deros; Ahmad Rasdan Ismail; Jaharah A. Ghani; Mohd Yusri Mohd Yusof

    2014-01-01

    Regulation on occupational safety and health in Malaysia had evolved from the prescriptive factory and machinery act to a self-regulated occupational safety and health act. However, from the authors’ observation the high standards of occupational safety and health culture that surpass the legal requirement were not widely practiced by Small and Medium Enterprises (SMEs). The two main objectives of this study are: First, first, to identify and determine the level of conformity and second...

  3. Plutonium working group report on environmental, safety and health vulnerabilities associated with the department's plutonium storage. Volume II, Appendix B, Part 9: Oak Ridge site site team report

    International Nuclear Information System (INIS)

    1994-09-01

    This report provides the input to and results of the Department of Energy (DOE) - Oak Ridge Operations (ORO) DOE Plutonium Environment, Safety and Health (ES ampersand H) Vulnerability Assessment (VA) self-assessment performed by the Site Assessment Team (SAT) for the Oak Ridge National Laboratory (ORNL or X-10) and the Oak Ridge Y-12 Plant (Y-12) sites that are managed by Martin Marietta Energy Systems, Inc. (MMES). As initiated (March 15, 1994) by the Secretary of Energy, the objective of the VA is to identify and rank-order DOE-ES ampersand H vulnerabilities associated for the purpose of decision making on the interim safe management and ultimate disposition of fissile materials. This assessment is directed at plutonium and other co-located transuranics in various forms

  4. Occupational safety and health in the food and drink industries.

    OpenAIRE

    Tomoda S

    1993-01-01

    Chapter 5 examines "Safety and health issues in respect of women workers in the food and drink industries". The paper provides information on the impact of technological progress in the sector; identifies the general hazards encountered; describes the injuries and diseases suffered by workers and concentrates on the most common approaches adopted for their prevention; and concludes by emphasizing the importance of adopting a tripartite approach to the solution of safety and health problems.

  5. Foundational workplace safety and health competencies for the emerging workforce☆

    Science.gov (United States)

    Okun, Andrea H.; Guerin, Rebecca J.; Schulte, Paul A.

    2016-01-01

    Introduction Young workers (aged 15–24) suffer disproportionately from workplace injuries, with a nonfatal injury rate estimated to be two times higher than among workers age 25 or over. These workers make up approximately 9% of the U.S. workforce and studies have shown that nearly 80% of high school students work at some point during high school. Although young worker injuries are a pressing public health problem, the critical knowledge and skills needed to prepare youth for safe and healthy work are missing from most frameworks used to prepare the emerging U.S. workforce. Methods A framework of foundational workplace safety and health knowledge and skills (the NIOSH 8 Core Competencies)was developed based on the Health Belief Model (HBM). Results The proposed NIOSH Core Competencies utilize the HBM to provide a framework for foundational workplace safety and health knowledge and skills. An examination of how these competencies and the HBM apply to actions that workers take to protect themselves is provided. The social and physical environments that influence these actions are also discussed. Conclusions The NIOSH 8 Core Competencies, grounded in one of the most widely used health behavior theories, fill a critical gap in preparing the emerging U.S. workforce to be cognizant of workplace risks. Practical applications Integration of the NIOSH 8 Core Competencies into school curricula is one way to ensure that every young person has the foundational workplace safety and health knowledge and skills to participate in, and benefit from, safe and healthy work. National Safety Council and Elsevier Ltd. All rights reserved. PMID:27846998

  6. Information Management of Health and Safety at the Tarkwa Mine of ...

    African Journals Online (AJOL)

    The Tarkwa Mine (TM) of Goldfields Ghana Limited (GGL) undertakes open pit mining operations with gold recovery by heap leach technology. As a mine, it is susceptible to health and safety risks in its operations. In spite of health and safety policy and regulations put in place at the TM, there have been reported cases of ...

  7. Handbook of laboratory health and safety measures

    International Nuclear Information System (INIS)

    Pal, S.B.

    1985-01-01

    Eighteen chapters deal with all kinds of possible health and safety hazards, chemical, physical and biological, arising in laboratories. Two chapters, on X-ray hazards - diagnostic and therapeutic, and radiation protection in radionuclide investigations, respectively are indexed separately. (U.K.)

  8. Improving health care quality and safety: the role of collective learning

    Directory of Open Access Journals (Sweden)

    Singer SJ

    2015-11-01

    Full Text Available Sara J Singer,1–4 Justin K Benzer,4–6 Sami U Hamdan4,6 1Department of Health Policy and Management, Harvard T.H. Chan School of Public Health, Boston, MA, USA; 2Department of Medicine, Harvard Medical School, Boston, MA, USA; 3Mongan Institute for Health Policy, Massachusetts General Hospital, Boston, MA, USA; 4Center for Healthcare Organization and Implementation Research, VA Boston Healthcare System, Boston, MA, USA; 5VISN 17 Center of Excellence for Research on Returning War Veterans, Waco, TX, USA; 6Department of Health Policy and Management, Boston University School of Public Health, Boston, MA, USA Abstract: Despite decades of effort to improve quality and safety in health care, this goal feels increasingly elusive. Successful examples of improvement are infrequently replicated. This scoping review synthesizes 76 empirical or conceptual studies (out of 1208 originally screened addressing learning in quality or safety improvement, that were published in selected health care and management journals between January 2000 and December 2014 to deepen understanding of the role that collective learning plays in quality and safety improvement. We categorize learning activities using a theoretical model that shows how leadership and environmental factors support collective learning processes and practices, and in turn team and organizational improvement outcomes. By focusing on quality and safety improvement, our review elaborates the premise of learning theory that leadership, environment, and processes combine to create conditions that promote learning. Specifically, we found that learning for quality and safety improvement includes experimentation (including deliberate experimentation, improvisation, learning from failures, exploration, and exploitation, internal and external knowledge acquisition, performance monitoring and comparison, and training. Supportive learning environments are characterized by team characteristics like psychological

  9. 77 FR 72998 - Policy Statement on Occupational Safety and Health Standards for Aircraft Cabin Crewmembers

    Science.gov (United States)

    2012-12-07

    ... [Docket No.: FAA-2012-0953] Policy Statement on Occupational Safety and Health Standards for Aircraft... regarding the regulation of some occupational safety and health conditions affecting cabin crewmembers on aircraft by the Occupational Safety and Health Administration (OSHA). This policy statement will enhance...

  10. Data Analysis of Occupational Health and Safety Management and Total Quality Management Systems

    Directory of Open Access Journals (Sweden)

    Ahmet Yakut

    2013-01-01

    Full Text Available In our study, Total Quality Management, Occupational Health and Safety on the effects of the construction industry, building sites of Istanbul evaluated with the results of the survey of 25 firms. For Occupational Health and Safety program, walked healthy, active employees in her role increased and will increase the importance of education. Due to non-implementation of the OHS system in our country enough, work-related accidents and deaths and injuries resulting from these accidents is very high. Firms as a result of the analysis, an effective health and safety management system needs to be able to fulfill their responsibilities. This system is designated as OHSAS 18001 Occupational Health and Safety Management System and the construction industry can be regarded as the imperatives.

  11. Integrated Approaches to Occupational Health and Safety: A Systematic Review.

    Science.gov (United States)

    Cooklin, A; Joss, N; Husser, E; Oldenburg, B

    2017-09-01

    The study objective was to conduct a systematic review of the effectiveness of integrated workplace interventions that combine health promotion with occupational health and safety. Electronic databases (n = 8), including PsychInfo and MEDLINE, were systematically searched. Studies included were those that reported on workplace interventions that met the consensus definition of an "integrated approach," published in English, in the scientific literature since 1990. Data extracted were occupation, worksite, country, sample size, intervention targets, follow-up period, and results reported. Quality was assessed according to American College of Occupational and Environmental Medicine Practice Guidelines. Heterogeneity precluded formal meta-analyses. Results were classified according to the outcome(s) assessed into five categories (health promotion, injury prevention, occupational health and safety management, psychosocial, and return-on-investment). Narrative synthesis of outcomes was performed. A total of 31 eligible studies were identified; 23 (74%) were (quasi-)experimental trials. Effective interventions were most of those aimed at improving employee physical or mental health. Less consistent results were reported from integrated interventions targeting occupational health and safety management, injury prevention, or organizational cost savings. Integrated approaches have been posed as comprehensive solutions to complex issues. Empirical evidence, while still emerging, provides some support for this. Continuing investment in, and evaluation of, integrated approaches are worthwhile.

  12. Working Safety in Confined Spaces. Module SH-32. Safety and Health.

    Science.gov (United States)

    Center for Occupational Research and Development, Inc., Waco, TX.

    This student module on working safely in confined spaces in one of 50 modules concerned with job safety and health. This module explains how to recognize potential hazards in confined spaces, how to deal with these hazards, and how planning can prevent accidents. Following the introduction, 17 objectives (each keyed to a page in the text) the…

  13. 76 FR 28790 - Board of Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH)

    Science.gov (United States)

    2011-05-18

    ... Hearing Loss Prevention; Personal Protective Technologies; Health Hazard Evaluations; Construction Safety... Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH) In accordance with... relating to occupational safety and health and to mine health. The Board of Scientific Counselors shall...

  14. 77 FR 75600 - Policy Statement on Occupational Safety and Health Standards for Aircraft Cabin Crewmembers...

    Science.gov (United States)

    2012-12-21

    ... [Docket No. FAA-2012-0953] Policy Statement on Occupational Safety and Health Standards for Aircraft Cabin... announced a proposed policy statement regarding the regulation of some occupational safety and health conditions affecting cabin crewmembers on aircraft by the Occupational Safety and Health Administration. The...

  15. The level of perceived quality and safety of health services by recipients. Recommendations and inter- ventions for health care policies

    Directory of Open Access Journals (Sweden)

    Foteini Koulouri

    2017-06-01

    Full Text Available In recent years, the importance of the quality in health sector is more and more acknowledged. In broader terms the literature on quality in health care contributed to this, and stressed the importance of meeting the needs of the service recipient. Safety and quality in health care constitute a multi-dimensional parameter and involve many factors and various resources. Safety is positively associated to the quality, as the existence of the one ensures the improvement of the other. Thus, there is a great effort to create a framework, through guidelines and instructions that could contribute to the protection and development of quality and safety. It is important that this framework includes many features that have been expressed as requests by the patients themselves and which can contribute to the development of realistic and effective recommendations for improvement. Greek reality reveals certain gaps in safety and quality of services delivered, so the main attention has to be focused on developing an integral national health policy; the development of guidelines and the appropriate evaluation of their implementation could be a first effective approach. Formulating an institutional framework about safety and quality in health sector should be incorporated in the culture of all health organizations. To this end, the involvement of health professionals is a vital and strategic point. Health care practitioners should incorporate safety and quality culture in their daily routine and health managers should enact efficient ways of evaluation and control mechanisms in order to achieve better outcomes. Motivation to this direction and active participation should be encouraged with positive approaches, away from any kind of sanction. Any mistakes, adverse effects and deviations should be identified, reported, analyzed and formulate the base of the corrective action. In conclusion, safety and quality in health sector are essential and strongly associated

  16. Identifying research priorities for patient safety in mental health: an international expert Delphi study

    Science.gov (United States)

    Murray, Kevin; Thibaut, Bethan; Ramtale, Sonny Christian; Adam, Sheila; Darzi, Ara; Archer, Stephanie

    2018-01-01

    Objective Physical healthcare has dominated the patient safety field; research in mental healthcare is not as extensive but findings from physical healthcare cannot be applied to mental healthcare because it delivers specialised care that faces unique challenges. Therefore, a clearer focus and recognition of patient safety in mental health as a distinct research area is still needed. The study aim is to identify future research priorities in the field of patient safety in mental health. Design Semistructured interviews were conducted with the experts to ascertain their views on research priorities in patient safety in mental health. A three-round online Delphi study was used to ascertain consensus on 117 research priority statements. Setting and participants Academic and service user experts from the USA, UK, Switzerland, Netherlands, Ireland, Denmark, Finland, Germany, Sweden, Australia, New Zealand and Singapore were included. Main outcome measures Agreement in research priorities on a five-point scale. Results Seventy-nine statements achieved consensus (>70%). Three out of the top six research priorities were patient driven; experts agreed that understanding the patient perspective on safety planning, on self-harm and on medication was important. Conclusions This is the first international Delphi study to identify research priorities in safety in the mental field as determined by expert academic and service user perspectives. A reasonable consensus was obtained from international perspectives on future research priorities in patient safety in mental health; however, the patient perspective on their mental healthcare is a priority. The research agenda for patient safety in mental health identified here should be informed by patient safety science more broadly and used to further establish this area as a priority in its own right. The safety of mental health patients must have parity with that of physical health patients to achieve this. PMID:29502096

  17. Developing an action-based health and safety training project in southern China.

    Science.gov (United States)

    Szudy, Betty; O'Rourke, Dara; Brown, Garrett D

    2003-01-01

    A project brought together international footwear manufacturers, labor rights groups, local contract factories, and occupational health professionals to strengthen factory health and safety programs in southern China. Steps involved in the two-year project, including needs assessment, interviews and focus groups with workers and supervisors; design and development of a participatory workshop; development of plant-wide health and safety committees in three footwear factories; and evaluation project impact, are discussed. The project significantly increased occupational safety and health knowledge, and hazards in the factories were identified and corrected. Successes and challenges faced by three functioning worker-management health and safety committees are discussed. Key elements to create effective programs with meaningful participation by workers include: 1) developing clear guidelines that enable multi-stakeholder groups to collaborate; 2) obtaining top-level management support; 3) building workers' knowledge and capacity to fully participate; 4) involving local labor rights groups and occupational professionals in support and technical assistance; and 5) connecting project goals to larger issues within a country and the global economy.

  18. Comparison of AIHA ISO 9001-based occupational health and safety management system guidance document with a manufacturer's occupational health and safety assessment instrument.

    Science.gov (United States)

    Dyjack, D T; Levine, S P; Holtshouser, J L; Schork, M A

    1998-06-01

    Numerous manufacturing and service organizations have integrated or are considering integration of their respective occupational health and safety management and audit systems into the International Organization for Standardization-based (ISO) audit-driven Quality Management Systems (ISO 9000) or Environmental Management Systems (ISO 14000) models. Companies considering one of these options will likely need to identify and evaluate several key factors before embarking on such efforts. The purpose of this article is to identify and address the key factors through a case study approach. Qualitative and quantitative comparisons of the key features of the American Industrial Hygiene Association ISO-9001 harmonized Occupational Health and Safety Management System with The Goodyear Tire & Rubber Co. management and audit system were conducted. The comparisons showed that the two management systems and their respective audit protocols, although structured differently, were not substantially statistically dissimilar in content. The authors recommend that future studies continue to evaluate the advantages and disadvantages of various audit protocols. Ideally, these studies would identify those audit outcome measures that can be reliably correlated with health and safety performance.

  19. An Evaluation Tool for Agricultural Health and Safety Mobile Applications.

    Science.gov (United States)

    Reyes, Iris; Ellis, Tammy; Yoder, Aaron; Keifer, Matthew C

    2016-01-01

    As the use of mobile devices and their software applications, or apps, becomes ubiquitous, use amongst agricultural working populations is expanding as well. The smart device paired with a well-designed app has potential for improving workplace health and safety in the hands of those who can act upon the information provided. Many apps designed to assess workplace hazards and implementation of worker protections already exist. However, the abundance and diversity of such applications also presents challenges regarding evaluation practices and assignation of value. This is particularly true in the agricultural workspace, as there is currently little information on the value of these apps for agricultural safety and health. This project proposes a framework for developing and evaluating apps that have potential usefulness in agricultural health and safety. The evaluation framework is easily transferable, with little modification for evaluation of apps in several agriculture-specific areas.

  20. Integrated occupational safety and health management solutions and industrial cases

    CERN Document Server

    Häkkinen, Kari; Niskanen, Toivo

    2015-01-01

    Maximizing reader insights into a new movement toward leadership approaches that are collaborated and shared,  and which views Occupational Safety and Health (OSH) and performance excellence within the wider examination of leadership relationships and practices, this book argues that these relationships and processes are so central to the establishment of OSH functioning that studying them warrants a broad, cross-disciplinary, multiple method analysis. Exploring the complexity of leadership by the impact that contexts (e.g., national and organizational culture) may have on leaders, this book discusses the related literature, then moves forward to show how a more comprehensive practical approach to Occupational Safety and Health and performance excellence can function on levels pertaining to events, individuals, groups, and organizations. This book proposes that greater clarity in understanding leadership in Occupational Safety and Health and performance excellence can be developed from addressing two fundame...

  1. 77 FR 66639 - Advisory Committee on Construction Safety and Health (ACCSH)

    Science.gov (United States)

    2012-11-06

    ... Contract Work Hours and Safety Standards Act (Construction Safety Act) (40 U.S.C. 3701 et seq.) and the.../Women in Construction: 2:15 to 4:15 p.m. The following ACCSH Work Groups will meet November 28, 2012... Occupational Safety and Health Act of 1970 (29 U.S.C. 656), Section 107 of the Contract Work Hours and Safety...

  2. Occupational Health and Safety and Organizational Commitment: Evidence from the Ghanaian Mining Industry.

    Science.gov (United States)

    Amponsah-Tawiah, Kwesi; Mensah, Justice

    2016-09-01

    This study seeks to examine the relationship and impact of occupational health and safety on employees' organizational commitment in Ghana's mining industry. The study explores occupational health and safety and the different dimensions of organizational commitment. A cross-sectional survey design was used for this study. The respondents were selected based on simple random sampling. Out of 400 questionnaires administered, 370 were returned (77.3% male and 22.7% female) and used for the study. Correlation and multiple regression analysis were used to determine the relationship and impact between the variables. The findings of this study revealed positive and significant relationship between occupational health and safety management, and affective, normative, and continuance commitment. Additionally, the results revealed the significant impact of occupational health and safety on affective, normative, and continuance commitment. Management within the mining sector of Ghana must recognize the fact that workers who feel healthy and safe in the performance of their duties, develop emotional attachment and have a sense of obligation to their organization and are most likely committed to the organization. Employees do not just become committed to the organization; rather, they expect management to first think about their health and safety needs by instituting good and sound policy measures. Thus, management should invest in the protection of employees' health and safety in organizations.

  3. Health, hygiene and safety in the workplace and the MARS interview

    CERN Multimedia

    François Angerand

    2012-01-01

    The MARS exercise provides a unique opportunity for exchange between staff members and their supervisors.  It is also an opportunity to review workplace health, hygiene and safety issues, and in particular to identify occupational risks to which the staff member may be exposed. That information can also be used to identify and arrange for safety training, and to agree on the personal protective equipment that may be required.   CERN's Medical Service can use the identified occupational risks to verify that the state of health of each member of the personnel is compatible with the work assigned, which is one of the Service's responsibilities. Part 4 of the 2012 MARS form ("Aspects related to health, safety and working conditions") will therefore have a new box, which should be checked to confirm that the staff member and the supervisor have identified occupational risks using form OHS 0-0-3. The safety courses should be listed under "Development...

  4. An Investigation of Health and Safety Measures in a Hydroelectric Power Plant.

    Science.gov (United States)

    Acakpovi, Amevi; Dzamikumah, Lucky

    2016-12-01

    Occupational risk management is known as a catalyst in generating superior returns for all stakeholders on a sustainable basis. A number of companies in Ghana implemented health and safety measures adopted from international companies to ensure the safety of their employees. However, there exist great threats to employees' safety in these companies. The purpose of this paper is to investigate the level of compliance of Occupational Health and Safety management systems and standards set by international and local legislation in power producing companies in Ghana. The methodology is conducted by administering questionnaires and in-depth interviews as measuring instruments. A random sampling technique was applied to 60 respondents; only 50 respondents returned their responses. The questionnaire was developed from a literature review and contained questions and items relevant to the initial research problem. A factor analysis was also carried out to investigate the influence of some variables on safety in general. Results showed that the significant factors that influence the safety of employees at the hydroelectric power plant stations are: lack of training and supervision, non-observance of safe work procedures, lack of management commitment, and lack of periodical check on machine operations. The study pointed out the safety loopholes and therefore helped improve the health and safety measures of employees in the selected company by providing effective recommendations. The implementation of the proposed recommendations in this paper, would lead to the prevention of work-related injuries and illnesses of employees as well as property damage and incidents in hydroelectric power plants. The recommendations may equally be considered as benchmark for the Safety and Health Management System with international standards.

  5. 78 FR 11651 - Board of Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH)

    Science.gov (United States)

    2013-02-19

    ... Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH) In accordance with..., research, experiments, and demonstrations relating to occupational safety and health and to mine health... Occupational Safety and Health on research and prevention programs. Specifically, the Board shall provide...

  6. 77 FR 47850 - Board of Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH)

    Science.gov (United States)

    2012-08-10

    ... Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH) In accordance with..., research, experiments, and demonstrations relating to occupational safety and health and to mine health... Occupational Safety and Health on research and prevention programs. Specifically, the Board shall provide...

  7. Introduction to good practice in health, environment and safety management in enterprises

    NARCIS (Netherlands)

    Baranski, B.; Zwetsloot, G.

    2000-01-01

    Purpose of this paper, presented on the fifth annual meeting of the Baltic Sea Network on Occupational Health and Safety (Berlin, 18-19 November 1999), is to outline conceptual models of good practice (GP) in Health, Environment and Safety Management in Enterprises (HESME), present major components

  8. Developing and Testing the Health Care Safety Hotline: A Prototype Consumer Reporting System for Patient Safety Events.

    Science.gov (United States)

    Schneider, Eric C; Ridgely, M Susan; Quigley, Denise D; Hunter, Lauren E; Leuschner, Kristin J; Weingart, Saul N; Weissman, Joel S; Zimmer, Karen P; Giannini, Robert C

    2017-06-01

    This article describes the design, development, and testing of the Health Care Safety Hotline, a prototype consumer reporting system for patient safety events. The prototype was designed and developed with ongoing review by a technical expert panel and feedback obtained during a public comment period. Two health care delivery organizations in one metropolitan area collaborated with the researchers to demonstrate and evaluate the system. The prototype was deployed and elicited information from patients, family members, and caregivers through a website or an 800 phone number. The reports were considered useful and had little overlap with information received by the health care organizations through their usual risk management, customer service, and patient safety monitoring systems. However, the frequency of reporting was lower than anticipated, suggesting that further refinements, including efforts to raise awareness by actively soliciting reports from subjects, might be necessary to substantially increase the volume of useful reports. It is possible that a single technology platform could be built to meet a variety of different patient safety objectives, but it may not be possible to achieve several objectives simultaneously through a single consumer reporting system while also establishing trust with patients, caregivers, and providers.

  9. 48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

    Science.gov (United States)

    2010-10-01

    ... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

  10. Scientific Approach for Optimising Performance, Health and Safety in High-Altitude Observatories

    Science.gov (United States)

    Böcker, Michael; Vogy, Joachim; Nolle-Gösser, Tanja

    2008-09-01

    The ESO coordinated study “Optimising Performance, Health and Safety in High-Altitude Observatories” is based on a psychological approach using a questionnaire for data collection and assessment of high-altitude effects. During 2007 and 2008, data from 28 staff and visitors involved in APEX and ALMA were collected and analysed and the first results of the study are summarised. While there is a lot of information about biomedical changes at high altitude, relatively few studies have focussed on psychological changes, for example with respect to performance of mental tasks, safety consciousness and emotions. Both, biomedical and psychological changes are relevant factors in occupational safety and health. The results of the questionnaire on safety, health and performance issues demonstrate that the working conditions at high altitude are less detrimental than expected.

  11. European and International Standards on health and safety in welding

    International Nuclear Information System (INIS)

    Howe, A

    2009-01-01

    A number of European and International Standards on health and safety in welding have been published in recent years and work on several more is nearing completion. These standards have been prepared jointly by the International Standards Organization (ISO) and the European Committee for Standardization (CEN). The standards development work has mostly been led by CEN/TC 121/SC 9, with excellent technical input from experts within Europe; but work on the revision of published standards, which has recently gathered pace, is now being carried out by ISO/TC 44/SC 9, with greater international involvement. This paper gives an overview of the various standards that have been published, are being revised or are under development in this field of health and safety in welding, seeking to (i) increase international awareness of published standards, (ii) encourage wider participation in health and safety in welding standards work and (iii) obtain feedback and solicit comments on standards that are currently under development or revision. Such an initiative is particularly timely because work is currently in progress on the revision of one of the more important standards in this field, namely EN ISO 10882:2001 Health and safety in welding and allied processes- Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles.

  12. PERCEPTION OF BUILDING CONSTRUCTION WORKERS TOWARDS SAFETY, HEALTH AND ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    C.R. CHE HASSAN

    2007-12-01

    Full Text Available The construction industry is known as one of the most hazardous activities. Therefore, safety on the job site is an important aspect with respect to the overall safety in construction. This paper assesses the safety level perception of the construction building workers towards safety, health and environment on a construction job site in Kuala Lumpur, Malaysia. The above study was carried out by choosing 5 selected large building construction projects and 5 small building construction projects respectively in and around Kuala Lumpur area. In the present study, an exhaustive survey was carried out in these 10 project site areas using a standard checklist and a detailed developed questionnaire. The checklist comprised 17 divisions of safety measurements which are considered and perceived to be important from the safety point of view and was assessed based on the score obtained. The questionnaire comprised the general information with 36 safety attitude statements on a 1-5 Likert scale which was distributed to 100 construction workers. The results of the checklist show the difference of safety levels between the large and small projects. The study revealed that the large projects shown a high and consistent level in safety while the small projects shown a low and varied safety levels. The relationship between the factors can be obtained from the questionnaire. They are organizational commitment, factor influencing communication among workmates, worker related factors, personal role and supervisors’ role factors, obstacles to safety and safe behavior factors and management commitment at all levels in line with the management structure and risk taking behavioral factors. The findings of the present study revealed invaluable indications to the construction managers especially in improving the construction workers’ attitude towards safety, health and environment and hence good safety culture in the building construction industries.

  13. Plutonium working group report on environmental, safety and health vulnerabilities associated with the department`s plutonium storage. Volume II, Appendix B, Part 9: Oak Ridge site site team report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    This report provides the input to and results of the Department of Energy (DOE) - Oak Ridge Operations (ORO) DOE Plutonium Environment, Safety and Health (ES & H) Vulnerability Assessment (VA) self-assessment performed by the Site Assessment Team (SAT) for the Oak Ridge National Laboratory (ORNL or X-10) and the Oak Ridge Y-12 Plant (Y-12) sites that are managed by Martin Marietta Energy Systems, Inc. (MMES). As initiated (March 15, 1994) by the Secretary of Energy, the objective of the VA is to identify and rank-order DOE-ES&H vulnerabilities associated for the purpose of decision making on the interim safe management and ultimate disposition of fissile materials. This assessment is directed at plutonium and other co-located transuranics in various forms.

  14. 78 FR 51729 - Board of Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH)

    Science.gov (United States)

    2013-08-21

    ... Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH) In accordance with... demonstrations relating to occupational safety and health and to mine health. The Board of Scientific Counselors shall provide guidance to the Director, National Institute for Occupational Safety and Health on...

  15. Getting home safe and sound: occupational safety and health administration at 38.

    Science.gov (United States)

    Silverstein, Michael

    2008-03-01

    The Occupational Safety and Health Act of 1970 (OSHAct) declared that every worker is entitled to safe and healthful working conditions, and that employers are responsible for work being free from all recognized hazards. Thirty-eight years after these assurances, however, it is difficult to find anyone who believes the promise of the OSHAct has been met. The persistence of preventable, life-threatening hazards at work is a failure to keep a national promise. I review the history of the Occupational Safety and Health Administration and propose measures to better ensure that those who go to work every day return home safe and sound. These measures fall into 6 areas: leverage and accountability, safety and health systems, employee rights, equal protection, framing, and infrastructure.

  16. Industrial safety and applied health physics. Annual report for 1977

    International Nuclear Information System (INIS)

    Auxier, J.A.; Davis, D.M.

    1978-06-01

    Progress is reported on the following: radiation monitoring with regard to personnel monitoring and health physics instrumentation; environs surveillance with regard to atmospheric monitoring, water monitoring, radiation background measurements, and soil and grass samples; radiation and safety surveys with regard to laboratory operations monitoring, radiation incidents, and laundry monitoring; industrial safety and special projects with regard to accident analysis, disabling injuries, and safety awards

  17. Occupational Safety and Health Measures in Micro-scale Enterprises (MSEs) in Shiraz, Iran

    Science.gov (United States)

    Jahangiri, Mehdi; Rostamabadi, Akbar; Malekzadeh, Gholamreza; Sadi, Amin Fahandej; Hamzavi, Golnar; Rasooli, Javad; Momeni, Zahra; Ghaem, Haleh

    2016-01-01

    Objectives: This study aimed to determine the extent of implementation of occupational safety and health measures in micro-scale enterprises (MSEs) and to assess the prevalence of occupational injuries and accidents and its relationship with occupational safety and health measures provided in the MSEs. Method: A cross-sectional study was conducted among 595 of MSEs. An index called the Safety and Health Requirement Index (SHRI) was created and used to calculate the percentage of provided occupational safety and health measures. The relationship between the SHRI and the occurrence of occupational accidents and injuries was investigated with the independent samples t-test and one-way ANOVA. Results: The mean SHRI score was 60.43%, which was categorized into moderate level. Of the 30.9% of enterprises that had experienced accidents and injuries, the most common types of injuries were musculoskeletal disorders and cuts, and the least common types were pulmonary and hearing problems. Results of one-way ANOVA revealed a statistically significant relationship between the mean SHRI score and industrial branch, enterprise size, and type of accident and injury. The independent samples t-test showed that the occurrence of occupational accidents and injuries was not significantly influenced by provided health and safety measures in MSEs. Conclusion: Given the high percentage of enterprises with very poor to poor levels for the SHRI and the high prevalence of occupational accidents and injuries among the studied MSEs, feasible protective strategies and job safety training programs are required to promote occupational health and safety in the studied MSEs. PMID:27010083

  18. Occupational Safety and Health Measures in Micro-scale Enterprises (MSEs) in Shiraz, Iran.

    Science.gov (United States)

    Jahangiri, Mehdi; Rostamabadi, Akbar; Malekzadeh, Gholamreza; Sadi, Amin Fahandej; Hamzavi, Golnar; Rasooli, Javad; Momeni, Zahra; Ghaem, Haleh

    2016-05-25

    This study aimed to determine the extent of implementation of occupational safety and health measures in micro-scale enterprises (MSEs) and to assess the prevalence of occupational injuries and accidents and its relationship with occupational safety and health measures provided in the MSEs. A cross-sectional study was conducted among 595 of MSEs. An index called the Safety and Health Requirement Index (SHRI) was created and used to calculate the percentage of provided occupational safety and health measures. The relationship between the SHRI and the occurrence of occupational accidents and injuries was investigated with the independent samples t-test and one-way ANOVA. The mean SHRI score was 60.43%, which was categorized into moderate level. Of the 30.9% of enterprises that had experienced accidents and injuries, the most common types of injuries were musculoskeletal disorders and cuts, and the least common types were pulmonary and hearing problems. Results of one-way ANOVA revealed a statistically significant relationship between the mean SHRI score and industrial branch, enterprise size, and type of accident and injury. The independent samples t-test showed that the occurrence of occupational accidents and injuries was not significantly influenced by provided health and safety measures in MSEs. Given the high percentage of enterprises with very poor to poor levels for the SHRI and the high prevalence of occupational accidents and injuries among the studied MSEs, feasible protective strategies and job safety training programs are required to promote occupational health and safety in the studied MSEs.

  19. Factors impacting perceived safety among staff working on mental health wards.

    Science.gov (United States)

    Haines, Alina; Brown, Andrew; McCabe, Rhiannah; Rogerson, Michelle; Whittington, Richard

    2017-09-01

    Safety at work is a core issue for mental health staff working on in-patient units. At present, there is a limited theoretical base regarding which factors may affect staff perceptions of safety. This study attempted to identify which factors affect perceived staff safety working on in-patient mental health wards. A cross-sectional design was employed across 101 forensic and non-forensic mental health wards, over seven National Health Service trusts nationally. Measures included an online staff survey, Ward Features Checklist and recorded incident data. Data were analysed using categorical principal components analysis and ordinal regression. Perceptions of staff safety were increased by ward brightness, higher number of patient beds, lower staff to patient ratios, less dayroom space and more urban views. The findings from this study do not represent common-sense assumptions. Results are discussed in the context of the literature and may have implications for current initiatives aimed at managing in-patient violence and aggression. None. © The Royal College of Psychiatrists 2017. This is an open access article distributed under the terms of the Creative Commons Attribution (CC BY) license.

  20. 20 CFR 726.203 - Federal Coal Mine Health and Safety Act endorsement.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Federal Coal Mine Health and Safety Act endorsement. 726.203 Section 726.203 Employees' Benefits EMPLOYMENT STANDARDS ADMINISTRATION, DEPARTMENT OF LABOR FEDERAL COAL MINE HEALTH AND SAFETY ACT OF 1969, AS AMENDED BLACK LUNG BENEFITS; REQUIREMENTS FOR...

  1. Proposed amendments to the Accord Acts to incorporate an offshore occupational health and safety regime

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-04-15

    The Canada Atlantic Accords signed in 1985 with Newfoundland and Labrador and in 1986 with Nova Scotia facilitate the orderly development of petroleum resources in Canada's Atlantic offshore area. These accords established the Canada-Newfoundland and Labrador Offshore Petroleum Board and the Canada-Nova Scotia Offshore Petroleum Board and made them responsible, on behalf of the federal government and the respective provincial government, for the joint management of petroleum resources in the offshore area. While the federal and provincial governments are responsible for establishing the regime for operational safety and occupational health and safety to be administered by the 2 boards, there is no division of responsibilities between the provincial occupational health and safety regime and the Accord Acts. There is agreement amongst governments that the accord acts should be amended to clarify responsibilities and vest sole authority for occupational health and safety in the accord acts. This document outlined the policy intent of the proposed amendments to the Accord Acts to ground an occupational health and safety regime for the east coast offshore areas in legislation. The document discussed legislation to be amended; governance; and provisions of the occupational health and safety regime. General matters such as the application of the policy, allocation of responsibility and interpretation were also discussed. The general duties of the operators were identified along with specific duties of operators; duties related to transportation; occupational health and safety policy; health and safety management system; codes of practice; notification of accidents; duties of employers; and occupational health and safety program. Compliance and enforcement provisions were also summarized.

  2. A health and safety primer for the practicing health physicist

    International Nuclear Information System (INIS)

    Hylko, J.M.; Bradshaw, M.C.; Ross, L.E.; Brennan, M.J.; Pomatto, C.B.; Shelly, F.C.

    1996-01-01

    Environmental restoration (ER) is the process of removing a facility from service, the demolition of structures the identification and disposal of all hazardous and radioactive wastes, the decontamination of equipment and materials, and the restoration of a site for unrestricted use. The number of ER projects encompassing hazardous, industrial, and radiological conditions is expected to increase in response to various program requirements or mission changes. As a result, the practicing health physicist (HP) may have to address unique health and safety (H and S) issues beyond those of performing routine radiological activities. These unique H and S issues could include, but are not limited to the razing of buildings, the removal of radioactive materials and hazardous chemicals, below-grade excavation, confined space entry, storing flammable or combustible liquids, monitoring exposure to hazardous substances, contacting energized systems (e.g., electricity, hydraulics), noise abatement, the nullification of manufacturer warranties, and the operation and movement of heavy equipment. The purpose of this paper is to educate the practicing HP about these issues by reviewing specific regulations governing all H and S activities, and to provide an example of a site-specific H and S primer (e.g., Health and Safety Plan [HASP]). This primer advices the practicing HP about sound H and S principles, furnishes basic strategies for performing a hazard assessment/job safety analysis (HA/JSA) that can be applied to any ER project, and describes various engineering and administrative controls to mitigate hazardous exposures to ER personnel. In addition, 26 inspection checklist topics are available from the primary author to evaluate the adequacy of the engineering and administrative controls, or to necessitate the use of personal protective equipment (PPE) thereby mitigating the corresponding hazard. (author)

  3. Towards an occupational safety and health culture

    NARCIS (Netherlands)

    Zwetsloot, G.I.J.M.; Steijger, N.

    2014-01-01

    Occupational safety and health (OSH) is a highly regulated area that appears to be based on rational planning and logical management approaches, e.g. OSM Management Systems: employers and employees of organisations should be aware of OSH risks, assess these risks systematically, provide the

  4. Health and safety implications of occupational exposure to engineered nanomaterials.

    Science.gov (United States)

    Stebounova, Larissa V; Morgan, Hallie; Grassian, Vicki H; Brenner, Sara

    2012-01-01

    The rapid growth and commercialization of nanotechnology are currently outpacing health and safety recommendations for engineered nanomaterials. As the production and use of nanomaterials increase, so does the possibility that there will be exposure of workers and the public to these materials. This review provides a summary of current research and regulatory efforts related to occupational exposure and medical surveillance for the nanotechnology workforce, focusing on the most prevalent industrial nanomaterials currently moving through the research, development, and manufacturing pipelines. Their applications and usage precedes a discussion of occupational health and safety efforts, including exposure assessment, occupational health surveillance, and regulatory considerations for these nanomaterials. Copyright © 2011 Wiley Periodicals, Inc.

  5. Encyclopaedic complex of the safety and health protection at the work

    International Nuclear Information System (INIS)

    Anon

    2006-01-01

    This is the encyclopaedia of the safety and health protection at the work. The complex area of the safety and health protection at the work is for the aim of composition of the encyclopaedic composite book latticed into 27 thematic bounded units. The present division enables fast orientation with possibility to focus the attention on observed specific area of work safety. The structure of subject words in thematic units follows the goal totally to cover the actual file of knowledge in relevant area, at which come out form relevant terms, too. The Chapter XXIV deals with ionising and not-ionising radiation

  6. Health and safety annual report 1989

    International Nuclear Information System (INIS)

    1989-01-01

    This 1989 annual report on Health and Safety in BNFL is intended to give the public a general review of the impact of the Company's activities on its workforce, the public and the environment. The activities at Sellafield, Springfields, Chapelcross, Drigg and Capenhurst are outlined, together with sections on medical services and transport, and radiation monitoring of workforce and the environment. (author)

  7. Promoting Occupational Safety and Health for Cambodian Entertainment Sector Workers.

    Science.gov (United States)

    Hsu, Lee-Nah; Howard, Richard; Torriente, Anna Maria; Por, Chuong

    2016-08-01

    Cambodia has developed booming textile, garment, tourism, and entertainment service industries since the mid-1990s. The 2007 global financial crisis pushed many garment workers, who lost their jobs, into the entertainment sector. Entertainment workers are typically engaged informally by their employers and are subjected to long working hours, sexual harassment, and violence. Many who sell beverages are forced into excessive alcohol consumption as part of their work. Many are also expected by their employers and clients to provide sexual services. To address unsafe and unhealthy working conditions for these workers, an innovative occupational safety and health regulation was adopted in 2014. This first-of-its-kind occupational safety and health regulation was developed jointly by the Cambodian Ministry of Labour and Vocational Training and employers' and workers' organizations in the entertainment sector. The implementation of this regulation can also be a viable contribution of occupational safety and health to HIV interventions for these workers. © The Author(s) 2016.

  8. Integrated Environment and Safety and Health Management System (ISMS) Implementation Project Plan

    Energy Technology Data Exchange (ETDEWEB)

    MITCHELL, R.L.

    2000-01-10

    The Integrated Environment, Safety and Health Management System (ISMS) Implementation Project Plan serves as the project document to guide the Fluor Hanford, Inc (FHI) and Major Subcontractor (MSC) participants through the steps necessary to complete the integration of environment, safety, and health into management and work practices at all levels.

  9. Integrated Environment and Safety and Health Management System (ISMS) Implementation Project Plan

    International Nuclear Information System (INIS)

    MITCHELL, R.L.

    2000-01-01

    The Integrated Environment, Safety and Health Management System (ISMS) Implementation Project Plan serves as the project document to guide the Fluor Hanford, Inc (FHI) and Major Subcontractor (MSC) participants through the steps necessary to complete the integration of environment, safety, and health into management and work practices at all levels

  10. Health Information Technology in Healthcare Quality and Patient Safety: Literature Review.

    Science.gov (United States)

    Feldman, Sue S; Buchalter, Scott; Hayes, Leslie W

    2018-06-04

    The area of healthcare quality and patient safety is starting to use health information technology to prevent reportable events, identify them before they become issues, and act on events that are thought to be unavoidable. As healthcare organizations begin to explore the use of health information technology in this realm, it is often unclear where fiscal and human efforts should be focused. The purpose of this study was to provide a foundation for understanding where to focus health information technology fiscal and human resources as well as expectations for the use of health information technology in healthcare quality and patient safety. A literature review was conducted to identify peer-reviewed publications reporting on the actual use of health information technology in healthcare quality and patient safety. Inductive thematic analysis with open coding was used to categorize a total of 41 studies. Three pre-set categories were used: prevention, identification, and action. Three additional categories were formed through coding: challenges, outcomes, and location. This study identifies five main categories across seven study settings. A majority of the studies used health IT for identification and prevention of healthcare quality and patient safety issues. In this realm, alerts, clinical decision support, and customized health IT solutions were most often implemented. Implementation, interface design, and culture were most often noted as challenges. This study provides valuable information as organizations determine where they stand to get the most "bang for their buck" relative to health IT for quality and patient safety. Knowing what implementations are being effectivity used by other organizations helps with fiscal and human resource planning as well as managing expectations relative to cost, scope, and outcomes. The findings from this scan of the literature suggest that having organizational champion leaders that can shepherd implementation, impact culture

  11. Occupational health and safety surveillance and research using workers' compensation data.

    Science.gov (United States)

    Utterback, David F; Schnorr, Teresa M; Silverstein, Barbara A; Spieler, Emily A; Leamon, Tom B; Amick, Benjamin C

    2012-02-01

    Examine uses of US workers' compensation (WC) data for occupational safety and health purposes. This article is a summary of the proceedings from an invitational workshop held in September 2009 to discuss the use of WC data for occupational safety and health prevention purposes. Workers' compensation data systems, although limited in many ways, contain information such as medical treatments, their costs and outcomes, and disability causes that are unavailable from national occupational surveillance sources. Despite their limitations, WC records are collected in a manner consistent with many occupational health and safety surveillance needs. Reports are available on the use of WC data for surveillance and research purposes such as estimating the frequency, magnitude, severity, and cost of compensated injuries. Inconsistencies in WC data can limit generalization of research results.

  12. Development of a health and safety manual for emergency response operations

    International Nuclear Information System (INIS)

    Riland, C.A.; Junio, S.S.

    2000-01-01

    The Federal Radiological Monitoring and Assessment Center (FRMAC) Health and Safety Manual, which has been under development by a multi-agency group, is nearing completion and publication. The manual applies to offsite monitoring during a radiological accident or incident. Though written for multi-agency offsite monitoring activities (FRMAC), the manual is generic in nature and should be readily adaptable for other emergency response operations. Health and safety issues for emergency response situations often differ from those of normal operations. Examples of these differences and methodologies to address these issues are discussed. Challenges in manual development, including lack of regulatory and guidance documentation, are also discussed. One overriding principle in the Health and Safety Manual development is the overall reduction of risk, not just dose. The manual is broken into several chapters, which include Overview of Responsibities, Health Physics, Industrial Hygiene and Safey, Medical, and Environmental Compliance and Records. Included is a series of appendices, which presents additional information on forms and plans for default scenarios

  13. Injection Safety among Primary Health Care Workers in Jazan Region, Saudi Arabia

    Directory of Open Access Journals (Sweden)

    AA Ismail

    2014-07-01

    Full Text Available Background: Occupational exposure to percutaneous injuries is a substantial source of infections with blood-borne pathogens among health-care workers. Few studies evaluated injection safety practices in Saudi Arabia. Objective: To examine the structure and process of injection safety at primary health care level in Jazan health district, to evaluate knowledge, attitudes, and practices of primary health care physicians and nurses towards injection safety, and to determine the incidence of needle stick injuries among health care workers in Jazan region, Saudi Arabia. Methods: A cross-sectional study was conducted in Jazan primary health care centers (PHCCs, Saudi Arabia from September 2011 to March 2012. Data were collected using an observational checklist and data collection sheet. Jazan city health district was chosen at random from the 14 health sectors in Jazan region. All the 33 (10 urban, and 23 rural PHCCs of Jazan city were included in this study to get the predetermined sample size of health care workers. 200 health care workers (HCWs were recruited (29% physicians, and 71% nurses. Results: Syringes in the PHCCs were disposable (100%, individually packed (92%, and available at all volumes (98%. Methods of safe disposal of needles and sharps were also operated through contracting with professional companies in 84.8% of instances. Urban PHCCs had more posts for injection safety promotion than rural centers (p=0.02. Continuous Medical Education (CME programs on infection control were present in only 60% of PHCCs. At least 95% of HCWs in Jazan believed that sharp objects should be kept in a puncture-proof container, kept in a closed container, or disposed by a professional company. More than 80% of HCWs washed their hands by soap and water and cleaned them by alcohol before giving injection, and also got the three doses of hepatitis B vaccine.The rate of needle stick injury in the past year was 14%, without a significant difference between

  14. Estudio de la Gestión de la Seguridad y Salud en el sector construcción valenciano = Study of Safety and Health Management in the construction sector of Valencia

    Directory of Open Access Journals (Sweden)

    José Luis Fuentes-Barguesa

    2015-12-01

    Full Text Available La construcción es un sector que presenta un alto nivel de siniestrabilidad debido a sus características propias (alto componente de mano de obra y que se desarrolla al aire libre y por sus características organizativas, como los ritmos de trabajo, las metodologías de ejecución y la elevada subcontratación. La gestión de la Seguridad y Salud es un factor determinante a la hora de obtener mejoras en la ejecución de los trabajos y menores tasas de accidentes. En este trabajo se realiza un estudio del nivel actual de gestión de la seguridad y salud en el sector construcción en Valencia (España a partir de una encuesta realizada a técnicos con experiencia en el sector. Los principales resultados obtenidos son que el tamaño de la empresa es un factor clave para la seguridad y salud, tanto en los aspectos de formación como en la gestión de la documentación de Seguridad y Salud. Los resultados muestran también cómo a pesar del tiempo transcurrido desde las últimas aportaciones normativas, tales como el Libro de Subcontratación o el Registro de Empresas Acreditadas, las empresas tienen un alto desconocimiento de la misma. Abstract Construction is a sector with a high accident rate due to its own characteristics (high component of labor and develops outdoor and its organizational characteristics as working patterns, methods of implementation and higher outsourcing. Management of Health and Safety is a determining factor in obtaining best execution of work and lower rates of accidents. This paper presents a study of the current level of Health and Safety Management in the construction sector in Valencia (Spain from a survey of a group of technicians with experience in the sector. The main results are the size of the company is an important key to health and safety, both in terms of training as in the management of documentation. It also reflects how, despite the time elapsed since the latest regulations, such as the Book of Outsourcing

  15. Bechtel Hanford, Inc./ERC team health and safety plan Environmental Restoration Disposal Facility operations

    International Nuclear Information System (INIS)

    Turney, S.R.

    1996-02-01

    A comprehensive safety and health program is essential for reducing work-related injuries and illnesses while maintaining a safe and health work environment. This document establishes Bechtel Hanford, Inc. (BHI)/Environmental Restoration Contractor (ERC) team requirements, policies, and procedures and provides preliminary guidance to the Environmental Restoration Disposal Facility (ERDF) subcontractor for use in preparing essential safety and health documents. This health and safety plan (HASP) defines potential safety and health issues associated with operating and maintaining the ERDF. A site-specific HASP shall be developed by the ERDF subcontractor and shall be implemented before operations and maintenance work can proceed. An activity hazard analysis (AHA) shall also be developed to provide procedures to identify, assess, and control hazards or potential incidents associated with specific operations and maintenance activities

  16. Requirements for an ES and H assurance program at the working levels of organization

    International Nuclear Information System (INIS)

    Tierney, M.S.; Ellingson, A.C.

    1979-07-01

    Means by which the disciplines of quality assurance (QA), reliability (R), and human factors (HF) might be used to the advantage of Environment, Safety, and Health (ES and H) programs are being investigated. A generalized model assurance program, based on QA, R, and HF principles but specifically tailored to ES and H program needs, has been developed. Current studies address implementation of the model assurance program at the working levels of organization. It appears that the only way practicability at the working level can be determined is by the case study method. The present study represents a first step in the application of such a procedure. An attempt was made to approach the question of practicability by first constructing a generic ES and H assurance plan for working-level organizations that is based upon the more widely-applied model plan and studies mentioned earlier. Then the elements of this generic working-level plan were compared with the practices of an existing R and D organization at Sandia Laboratories, Albuquerque. Some of the necessary steps were taken to convert these practices to those required by the generic plan in order to gain a measure of the feasibility, cost, and some of the possible benefits of such a conversion. Partial results of one case study are presented, and some generalizations that emerge regarding the structure of an idealized working-level ES and H plan are made

  17. Factors shaping effective utilization of health information technology in urban safety-net clinics.

    Science.gov (United States)

    George, Sheba; Garth, Belinda; Fish, Allison; Baker, Richard

    2013-09-01

    Urban safety-net clinics are considered prime targets for the adoption of health information technology innovations; however, little is known about their utilization in such safety-net settings. Current scholarship provides limited guidance on the implementation of health information technology into safety-net settings as it typically assumes that adopting institutions have sufficient basic resources. This study addresses this gap by exploring the unique challenges urban resource-poor safety-net clinics must consider when adopting and utilizing health information technology. In-depth interviews (N = 15) were used with key stakeholders (clinic chief executive officers, medical directors, nursing directors, chief financial officers, and information technology directors) from staff at four clinics to explore (a) nonhealth information technology-related clinic needs, (b) how health information technology may provide solutions, and (c) perceptions of and experiences with health information technology. Participants identified several challenges, some of which appear amenable to health information technology solutions. Also identified were requirements for effective utilization of health information technology including physical infrastructural improvements, funding for equipment/training, creation of user groups to share health information technology knowledge/experiences, and specially tailored electronic billing guidelines. We found that despite the potential benefit that can be derived from health information technologies, the unplanned and uninformed introduction of these tools into these settings might actually create more problems than are solved. From these data, we were able to identify a set of factors that should be considered when integrating health information technology into the existing workflows of low-resourced urban safety-net clinics in order to maximize their utilization and enhance the quality of health care in such settings.

  18. Occupational safety and health education and training for underserved populations.

    Science.gov (United States)

    O'Connor, Tom; Flynn, Michael; Weinstock, Deborah; Zanoni, Joseph

    2014-01-01

    This article presents an analysis of the essential elements of effective occupational safety and health education and training programs targeting underserved communities. While not an exhaustive review of the literature on occupational safety and health training, the paper provides a guide for practitioners and researchers to the key factors they should consider in the design and implementation of training programs for underserved communities. It also addresses issues of evaluation of such programs, with specific emphasis on considerations for programs involving low-literacy and limited-English-speaking workers.

  19. Forest management practices and the occupational safety and health administration logging standard

    Science.gov (United States)

    John R. Myers; David Elton Fosbroke

    1995-01-01

    The Occupational Safety and Health Administration (OSHA) has established safety and health regulations for the logging industry. These new regulations move beyond the prior OSHA pulpwood harvesting standard by including sawtimber harvesting operations. Because logging is a major tool used by forest managers to meet silvicultural goals, managers must be aware of what...

  20. Aviation’s Normal Operations Safety Audit: a safety management and educational tool for health care? Results of a small-scale trial

    Directory of Open Access Journals (Sweden)

    Bennett SA

    2017-08-01

    Full Text Available Simon A Bennett Civil Safety and Security Unit, School of Business, University of Leicester, Leicester, UK Background: A National Health Service (NHS contingent liability for medical error claims of over £26 billion. Objectives: To evaluate the safety management and educational benefits of adapting aviation’s Normal Operations Safety Audit (NOSA to health care. Methods: In vivo research, a NOSA was performed by medical students at an English NHS Trust. After receiving training from the author, the students spent 6 days gathering data under his supervision. Results: The data revealed a threat-rich environment, where errors – some consequential – were made (359 threats and 86 errors were recorded over 2 weeks. The students claimed that the exercise improved their observational, investigative, communication, teamworking and other nontechnical skills. Conclusion: NOSA is potentially an effective safety management and educational tool for health care. It is suggested that 1 the UK General Medical Council mandates that all medical students perform a NOSA in fulfillment of their degree; 2 the participating NHS Trusts be encouraged to act on students’ findings; and 3 the UK Department of Health adopts NOSA as a cornerstone risk assessment and management tool. Keywords: aviation, safety audit, health care, management benefits, educational benefits

  1. Leadership and occupational safety and health (OSH): an expert analysis

    NARCIS (Netherlands)

    Elsler, D.; Flintrop, J.; Kaluza, S.; Hauke, A.; Starren, A.; Drupsteen, L.; Bell, N.

    2012-01-01

    In EU legislation as well as in scientific literature ever more attention is being paid to the important role of leadership in the improvement of Occupational Safety and Health (OSH). Improving the safety behaviour of employees requires understanding of the good leadership practices that can help

  2. 76 FR 7853 - Patient Safety Organizations: Voluntary Delisting From HealthDataPSO

    Science.gov (United States)

    2011-02-11

    ... Medical Error Management, LLC, of its status as a Patient Safety Organization (PSO). The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act), Public Law 109-41, 42 U.S.C. 299b-21--b-26... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety...

  3. Health physics and safety in JAERI, No.17

    International Nuclear Information System (INIS)

    1975-09-01

    In the annual report No.17 (fiscal 1974), the activities of health physics and safety in the Tokyo Office, Tokai Research Establishment, Takasaki Radiation Chemistry Research Establishment, and Oarai Research Establishment are described. (auth.)

  4. Health physics and safety in JAERI, No. 18

    International Nuclear Information System (INIS)

    1976-10-01

    In the annual report No.18 (fiscal 1975), the activities of health physics and safety in the Tokyo Office, Tokai Research Establishment, Takasaki Radiation Chemistry Research Establishment, and Oarai Research Establishment are described. (auth.)

  5. Toward improved construction health, safety, and ergonomics in ...

    African Journals Online (AJOL)

    involved in architectural CPD programmes take 'upstream design ownership' and use the model as a ... health and safety (H&S), inclusive of construction ergonomics, the responsibility for ...... Santiago, Chile, 18-20 January. Rotterdam: CIB ...

  6. A Global Perspective on Vaccine Safety and Public Health: The Global Advisory Committee on Vaccine Safety

    Science.gov (United States)

    Folb, Peter I.; Bernatowska, Ewa; Chen, Robert; Clemens, John; Dodoo, Alex N. O.; Ellenberg, Susan S.; Farrington, C. Patrick; John, T. Jacob; Lambert, Paul-Henri; MacDonald, Noni E.; Miller, Elizabeth; Salisbury, David; Schmitt, Heinz-J.; Siegrist, Claire-Anne; Wimalaratne, Omala

    2004-01-01

    Established in 1999, the Global Advisory Committee on Vaccine Safety advises the World Health Organization (WHO) on vaccine-related safety issues and enables WHO to respond promptly, efficiently, and with scientific rigor to issues of vaccine safety with potential global importance. The committee also assesses the implications of vaccine safety for practice worldwide and for WHO policies. We describe the principles on which the committee was established, its modus operandi, and the scope of the work undertaken, both present and future. We highlight its recent recommendations on major issues, including the purported link between the measles–mumps–rubella vaccine and autism and the safety of the mumps, influenza, yellow fever, BCG, and smallpox vaccines as well as that of thiomersal-containing vaccines. PMID:15514229

  7. Health and safety information program for hazardous materials

    International Nuclear Information System (INIS)

    O'Brien, M.P.; Fallon, N.J.; Kuehner, A.V.

    1979-01-01

    The system is used as a management tool in several safety and health programs. It is used to: trace the use of hazardous materials and to determine monitoring needs; inform the occupational physician of the potential health problems associated with materials ordered by a given individual; inform the fire and rescue group of hazardous materials in a given building; provide waste disposal recommendations to the hazardous waste management group; assist the hazardous materials shipping coordinator in identifying materials which are regulated by the Department of Transportation; and guide management decisions in the area of recognizing and rectifying unsafe conditions. The information system has been expanded from a manual effort to provide a brief description of health hazards of chemicals used at the lab to a computerized health and safety information system which serves the needs of all personnel who may encounter the material in the course of their work. The system has been designed to provide information needed to control the potential problems associated with a hazardous material up to the time that it is consumed in a given operation or is sent to the waste disposal facility

  8. Health Courts” and Accountability for Patient Safety

    Science.gov (United States)

    Mello, Michelle M; Studdert, David M; Kachalia, Allen B; Brennan, Troyen A

    2006-01-01

    Proposals that medical malpractice claims be removed from the tort system and processed in an alternative system, known as administrative compensation or ‘health courts,’ attract considerable policy interest during malpractice ‘crises,’ including the current one. This article describes current proposals for the design of a health court system and the system's advantages for improving patient safety. Among these advantages are the cultivation of a culture of transparency regarding medical errors and the creation of mechanisms to gather and analyze data on medical injuries. The article discusses the experiences of foreign countries with administrative compensation systems for medical injury, including their use of claims data for research on patient safety; choices regarding the compensation system's relationship to physician disciplinary processes; and the proposed system's possible limitations. PMID:16953807

  9. Effect of Occupational Health and Safety Management System on Work-Related Accident Rate and Differences of Occupational Health and Safety Management System Awareness between Managers in South Korea's Construction Industry

    OpenAIRE

    Yoon, Seok J.; Lin, Hsing K.; Chen, Gang; Yi, Shinjea; Choi, Jeawook; Rui, Zhenhua

    2013-01-01

    Background: The study was conducted to investigate the current status of the occupational health and safety management system (OHSMS) in the construction industry and the effect of OHSMS on accident rates. Differences of awareness levels on safety issues among site general managers and occupational health and safety (OHS) managers are identified through surveys. Methods: The accident rates for the OHSMS-certified construction companies from 2006 to 2011, when the construction OHSMS became ...

  10. The impact of green stormwater infrastructure installation on surrounding health and safety

    Science.gov (United States)

    Michelle C. Kondo; Sarah C. Low; Jason Henning; Charles C. Branas

    2015-01-01

    We investigated the health and safety effects of urban green stormwater infrastructure (GSI) installments. We conducted a difference-in-differences analysis of the effects of GSI installments on health (e.g., blood pressure, cholesterol and stress levels) and safety (e.g., felonies, nuisance and property crimes, narcotics crimes) outcomes from 2000 to 2012 in...

  11. [Disclosing the work processes of the community health agents on the Family Health Strategy in Vitória (ES, Brazil)].

    Science.gov (United States)

    Galavote, Heletícia Scabelo; do Prado, Thiago Nascimento; Maciel, Ethel Leonor Noia; de Cássia Duarte Lima, Rita

    2011-01-01

    The community health agent (CHA) has a singular role as a "link" between the community and the health service. The main purpose of this descriptive/qualitative study is to evaluate the production of the CHA work processes in the Family Health Strategy in the county of Vitória (ES, Brazil). The research was developed in the health region of Maruípe, a district in the county of Vitória. The researchers invited 14 CHAs to use a half structured interview based on a guide script containing 24 questions. The process of work in health was considered as "a prevention and promotion of health", and the domiciliary visits were considered as being an everyday basic activity. The CHAs withhold several interpretations concerning to the work process and associated to the concept of unit the team has. It is also possible to notice a kind of idealism of the competences concerning to the CHA work, thus, causing a feeling of impotence and limitation when facing the challenges imposed by it. It is possible to conclude that the CHA needs tools and abilities that overcome their technical knowledge in order to act in a social scope and also to deal with the health needs of each user.

  12. Natural(es) remisión de V. ciencias natural(es).

    OpenAIRE

    2011-01-01

    [ES] Definición del término Natural(es) remisión de V. ciencias natural(es). en el diccionario Dicter. [EN] Definition of the word Natural(es) remisión de V. ciencias natural(es). in the dictionary Dicter.

  13. Self arrangements in occupational safety and health management

    International Nuclear Information System (INIS)

    Ismail Bahari

    2002-01-01

    The book is written with the awareness of safe work culture where success does not lie to compliance with the law only. Instead it is more of an excellent management based on the principle of self organization. Self arrangements in the management of occupational safety and health do not rest on the shoulders of the employer or the safety management and safety communities, but are committed together with the leadership of the employer. Self arrangements will be more meaningful and successful if those involved have knowledge about the philosophy and principles of why and how this management is done, and so the method can be practiced and eventually cultivated as a working system. (author)

  14. Adult Learning in Health and Safety: Some Issues and Approaches.

    Science.gov (United States)

    O Fathaigh, Mairtin

    This document, which was developed for presentation at a seminar on adult learning and safety, examines approaches to occupational safety and health (OSH) learning/training in the workplace. Section 1 examines selected factors affecting adults' learning in workplace OSH programs. The principal dimensions along which individual adult learners will…

  15. A LITERATURE REVIEW ON GLOBAL OCCUPATIONAL SAFETY AND HEALTH PRACTICE & ACCIDENTS SEVERITY

    Directory of Open Access Journals (Sweden)

    Kassu Jilcha

    2016-06-01

    Full Text Available This literature review focuses on researches undertaken since 1980s onwards. The purpose of the study is to identify existing gaps on workplace safety and health management and propose future research areas. The review adds value to existing electronic database through integration of researches' results. To identify existing gaps, a systematic literature review approach has been used. The reviews were undertaken through keywords and safety related topics. In the literature, various characteristics of workplace safety and health problems were found emanating from the lack of operational activities of the employees, internal working environment and external environment those impose hazards on employee temporarily, permanently and on working environments. The integration of multidisciplinary approaches and collaborative model of hub and peripheral industries to protect workplace safety hazards to develop multilevel model has been undermined in many researches. The other face of finding is that knowledge transfer mechanism and industrial topology factors are left. Some researches finding showed that they have focused on single problems related to health and health factors leaving universal improving workplace safety. In general, this literature reviews compare various studies output based on their research method and findings to fills gap and add value to a body of knowledge.

  16. 78 FR 24751 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

    Science.gov (United States)

    2013-04-26

    ... 14, 2013 (Closed) Place: Embassy Suites, 1900 Diagonal Road, Alexandria, Virginia 22314, Telephone... business and for the study section to consider safety and occupational health-related grant applications...

  17. Financial Considerations for Health and Safety in the Australian Dairy Industry.

    Science.gov (United States)

    Lower, Tony; Pollock, Kirrily

    2017-01-01

    This study aimed to quantify the burden of fatal and workers' compensation-related injuries on the dairy sector in Australia and to assess current financial inputs for work health and safety actions. The first and second phases entailed a review of the financial costs associated with fatal (2001-2013) and workers' compensation cases (2008-2009 to 2012-2013). The third element was a case-study approach focusing on actual production and cost data from a small sample of dairy farms (n = 6) to ascertain an estimate for current financial inputs to work health and safety. The estimated financial impact was approximately AUD$12.4 million each year, comprising AUD$6.8 million for fatalities and AUD$5.6 million for compensable injuries. All sample businesses were investing in health and safety initiatives; however, this was modest and on average represented 0.4% of total expenditure (AUD$4,472) or financial case to increase strategic investments into work health and safety by dairy farmers in Australia. Increased investment has the potential to not only minimize the burden of injury and costs to dairy farmers, but will also significantly reduce the devastating impacts that these incidents have on individuals, their families and communities.

  18. Occupational safety and health textbook for radiological personnel employed in structural material testing

    International Nuclear Information System (INIS)

    Abraham, J.

    1981-01-01

    The comprehensive textbook for X-ray and radiological testing personnel includes requirements and rules of occupational safety and health on the basis of Hungarian and international (mainly German) literature. In the chapter Fundamentals, X-ray and radioactive radiations, their measurements and biological effects, doses etc are described. In the chapter Occupational safety and health, the jobs representing radiation hazards are listed and safety regulations for them are reported. Finally, information for prevention and first aid is presented. Control questions are added to each part. The Appendix contains safety standards and regulations, information on legal aspects of safety and radiation protection as well as recommendations. (Sz.J.)

  19. National Resource Center for Health and Safety in Child Care and Early Education

    Science.gov (United States)

    ... National Resource Center for Health and Safety in Child Care and Early Education (NRC) at the University of Colorado College of ... National Resource Center for Health and Safety in Child Care and Early Education Email: info@NRCKids.org Please read our disclaimer ...

  20. Farmworkers at the border: a bilingual initiative for occupational health and safety.

    Science.gov (United States)

    Acosta, Martha Soledad Vela; Sechrest, Lee; Chen, Mei-Kuang

    2009-01-01

    Bilingual and bicultural occupational health and safety interventions for Hispanic farmworkers are extremely rare and, because of language barriers and cultural differences, issues important to their health and safety on the job remain unaddressed. We designed, conducted, and assessed the first bilingual occupational health and safety education program for farmworkers attending High School Equivalency Programs (HEPs). We took an interdisciplinary participatory approach by integrating educators and researchers with a community advisory board to guide development, evaluation, and implementation of Work Safely-Trabaje con Cuidado Curriculum (Curriculum), a bilingual occupational health and safety curriculum. We created a quasi-experimental design using mixed-method evaluation (quantitative and qualitative elements) via pre- and posttest comparisons, follow-up surveys, and focus groups assessing the Curriculum effect on knowledge, safety risk perception (SRP), and safety behavior. Focus groups and follow-up surveys reflected success and acceptance of the Curriculum among participating farmworkers under the study's logic model. Completion of the Curriculum resulted in statistically significant improvements in the combined score of knowledge and SRP at the posttest (p = 0.001) and follow-up survey (p = 0.02) in the intervention group. After completing this study, the Curriculum was permanently adopted by the two high school equivalency sites involved. The participatory approach resulted in integration of community and applied research partnership. The potential to expand use of this Curriculum by other HEP sites can further assess effectiveness and external validity among underserved minority groups.

  1. Jefferson Proving Ground, South of the Firing Line Health and Safety Plan, Volume 4

    National Research Council Canada - National Science Library

    1992-01-01

    .... The purpose of this Site Health and Safety Plan (SHSP) is to assign SECD personnel health and safety responsibilities, to prescribe mandatory operating procedures, and to establish personal-protective-equipment (PPE...

  2. Assessment of occupational health and safety hazard exposures among working college students.

    Science.gov (United States)

    Balanay, Jo Anne G; Adesina, Adepeju; Kearney, Gregory D; Richards, Stephanie L

    2014-01-01

    Adolescents and young adults have higher injury rates than their adult counterparts in similar jobs. This study used the working college student population to assess health and safety hazards in the workplace, characterize related occupational diseases and injuries, and describe worker health/safety activities provided by employers. College students (≥17 years old) were assessed via online surveys about work history, workplace exposure to hazards, occupational diseases/injuries, and workplace health/safety activities. Approximately half (51%) of participants (n = 1,147) were currently employed at the time of the survey or had been employed while enrolled in college. Restaurants (other than fast food) were the most frequently reported work setting. The most reported workplace hazards included noise exposure and contact with hot liquids/surfaces. Twenty percent of working students experienced injury at work; some injuries were severe enough to limit students' normal activities for >3 days (30%) or require medical attention (44%). Men had significantly higher prevalence of injuries (P = 0.05) and near-misses (P safety training and half were given personal protective equipment (PPE) by their employers. Risk reduction from workplace injuries and illnesses among working college students may be achieved by implementing occupational health and safety (OHS) strategies including incorporation of OHS in the college curriculum, promotion of OHS by university/college student health services, and improving awareness of OHS online resources among college students, employers, and educators. © 2013 Wiley Periodicals, Inc.

  3. 48 CFR 952.223-71 - Integration of environment, safety, and health into work planning and execution.

    Science.gov (United States)

    2010-10-01

    ..., safety, and health into work planning and execution. 952.223-71 Section 952.223-71 Federal Acquisition... Provisions and Clauses 952.223-71 Integration of environment, safety, and health into work planning and... safety and health standards applicable to the work conditions of contractor and subcontractor employees...

  4. 78 FR 78362 - National Institute for Occupational Safety and Health Personal; Notice of public meeting in...

    Science.gov (United States)

    2013-12-26

    ... Institute for Occupational Safety and Health Personal; Notice of public meeting in Endicott, New York AGENCY: The National Institute for Occupational Safety and Health (NIOSH) of the Centers for Disease Control.... SUMMARY: The National Institute for Occupational Safety and Health (NIOSH) of the Centers for Disease...

  5. 76 FR 40733 - National Institute for Occupational Safety and Health, (NIOSH), World Trade Center Health Program...

    Science.gov (United States)

    2011-07-11

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention National Institute for Occupational Safety and Health, (NIOSH), World Trade Center Health Program Science/Technical Advisory Committee (WTCHP-STAC) Correction: This notice was published in the Federal Register on June 23...

  6. A generic standard for assessing and managing activities with significant risk to health and safety

    International Nuclear Information System (INIS)

    Wilde, T.S.; Sandquist, G.M.

    2005-01-01

    Some operations and activities in industry, business, and government can present an unacceptable risk to health and safety if not performed according to established safety practices and documented procedures. The nuclear industry has extensive experience and commitment to assessing and controlling such risks. This paper provides a generic standard based upon DOE Standard DOE-STD-3007- 93, Nov 1993, Change Notice No. 1, Sep 1998. This generic standard can be used to assess practices and procedures employed by any industrial and government entity to ensure that an acceptable level of safety and control prevail for such operations. When any activity and operation is determined to involve significant risk to health and safety to workers or the public, the organization should adopt and establish an appropriate standard and methodology to ensure that adequate health and safety prevail. This paper uses DOE experience and standards to address activities with recognized potential for impact upon health and safety. Existing and future assessments of health and safety issues can be compared and evaluated against this generic standard for insuring that proper planning, analysis, review, and approval have been made. (authors)

  7. [B-BS and occupational health and safety management systems].

    Science.gov (United States)

    Bacchetta, Adriano Paolo

    2010-01-01

    The objective of a SGSL is the "prevention" agreement as approach of "pro-active" toward the safety at work through the construction of an integrated managerial system in synergic an dynamic way with the business organization, according to continuous improvement principles. Nevertheless the adoption of a SGSL, not could guarantee by itself the obtainment of the full effectiveness than projected and every individual's adhesion to it, must guarantee it's personal involvement in proactive way, so that to succeed to actual really how much hypothesized to systemic level to increase the safety in firm. The objective of a behavioral safety process that comes to be integrated in a SGSL, it has the purpose to succeed in implementing in firm a process of cultural change that raises the workers social group fundamental safety value, producing an ample and full involvement of all in the activities of safety at work development. SGSL = Occupational Health and Safety Management System.

  8. Comparing Occupational Health and Safety Management System Programming with Injury Rates in Poultry Production.

    Science.gov (United States)

    Autenrieth, Daniel A; Brazile, William J; Douphrate, David I; Román-Muñiz, Ivette N; Reynolds, Stephen J

    2016-01-01

    Effective methods to reduce work-related injuries and illnesses in animal production agriculture are sorely needed. One approach that may be helpful for agriculture producers is the adoption of occupational health and safety management systems. In this replication study, the authors compared the injury rates on 32 poultry growing operations with the level of occupational health and safety management system programming at each farm. Overall correlations between injury rates and programming level were determined, as were correlations between individual management system subcomponents to ascertain which parts might be the most useful for poultry producers. It was found that, in general, higher levels of occupational health and safety management system programming were associated with lower rates of workplace injuries and illnesses, and that Management Leadership was the system subcomponent with the strongest correlation. The strength and significance of the observed associations were greater on poultry farms with more complete management system assessments. These findings are similar to those from a previous study of the dairy production industry, suggesting that occupational health and safety management systems may hold promise as a comprehensive way for producers to improve occupational health and safety performance. Further research is needed to determine the effectiveness of such systems to reduce farm work injuries and illnesses. These results are timely given the increasing focus on occupational safety and health management systems.

  9. Kaizen: ergonomics approach to occupational health and safety.

    Science.gov (United States)

    Kumashiro, Masaharu

    2011-12-01

    Kaizen (work improvement) is the forte of Japanese industry. Kaizen activities were born in the early 20th century under the name efficiency research. These activities were the beginning of industrial engineering (IE). Later on people began to rethink the single-minded devotion to improving productivity. Then the job re-design concept was developed. The main target of kaizen in the area of occupational health and safety in Japanese manufacturing is the improvement of inadequate working posture followed by the improvement of work for transporting and lifting heavy objects. Unfortunately, the kaizen activities undertaken by most Japanese companies are still focused on improving productivity and quality. The know-how for promoting kaizen activities that integrate the three aspects of IE, occupational health, and ergonomics is not being accumulated, however. In particular, the IE techniques should be incorporated into kaizen activities aimed at occupational safety and health, and the quantitative assessment of workload is required. In addition, it is important for on-the-job kaizen training in the ERGOMA Approach for production supervisors, who are the main advocates of IE kaizen.

  10. An analysis of electronic health record-related patient safety concerns

    Science.gov (United States)

    Meeks, Derek W; Smith, Michael W; Taylor, Lesley; Sittig, Dean F; Scott, Jean M; Singh, Hardeep

    2014-01-01

    Objective A recent Institute of Medicine report called for attention to safety issues related to electronic health records (EHRs). We analyzed EHR-related safety concerns reported within a large, integrated healthcare system. Methods The Informatics Patient Safety Office of the Veterans Health Administration (VA) maintains a non-punitive, voluntary reporting system to collect and investigate EHR-related safety concerns (ie, adverse events, potential events, and near misses). We analyzed completed investigations using an eight-dimension sociotechnical conceptual model that accounted for both technical and non-technical dimensions of safety. Using the framework analysis approach to qualitative data, we identified emergent and recurring safety concerns common to multiple reports. Results We extracted 100 consecutive, unique, closed investigations between August 2009 and May 2013 from 344 reported incidents. Seventy-four involved unsafe technology and 25 involved unsafe use of technology. A majority (70%) involved two or more model dimensions. Most often, non-technical dimensions such as workflow, policies, and personnel interacted in a complex fashion with technical dimensions such as software/hardware, content, and user interface to produce safety concerns. Most (94%) safety concerns related to either unmet data-display needs in the EHR (ie, displayed information available to the end user failed to reduce uncertainty or led to increased potential for patient harm), software upgrades or modifications, data transmission between components of the EHR, or ‘hidden dependencies’ within the EHR. Discussion EHR-related safety concerns involving both unsafe technology and unsafe use of technology persist long after ‘go-live’ and despite the sophisticated EHR infrastructure represented in our data source. Currently, few healthcare institutions have reporting and analysis capabilities similar to the VA. Conclusions Because EHR-related safety concerns have complex

  11. Managing health and safety risks: Implications for tailoring health and safety management system practices.

    Science.gov (United States)

    Willmer, D R; Haas, E J

    2016-01-01

    As national and international health and safety management system (HSMS) standards are voluntarily accepted or regulated into practice, organizations are making an effort to modify and integrate strategic elements of a connected management system into their daily risk management practices. In high-risk industries such as mining, that effort takes on added importance. The mining industry has long recognized the importance of a more integrated approach to recognizing and responding to site-specific risks, encouraging the adoption of a risk-based management framework. Recently, the U.S. National Mining Association led the development of an industry-specific HSMS built on the strategic frameworks of ANSI: Z10, OHSAS 18001, The American Chemistry Council's Responsible Care, and ILO-OSH 2001. All of these standards provide strategic guidance and focus on how to incorporate a plan-do-check-act cycle into the identification, management and evaluation of worksite risks. This paper details an exploratory study into whether practices associated with executing a risk-based management framework are visible through the actions of an organization's site-level management of health and safety risks. The results of this study show ways that site-level leaders manage day-to-day risk at their operations that can be characterized according to practices associated with a risk-based management framework. Having tangible operational examples of day-to-day risk management can serve as a starting point for evaluating field-level risk assessment efforts and their alignment to overall company efforts at effective risk mitigation through a HSMS or other processes.

  12. MP-Division health and safety reference handbook. [Contains glossary

    Energy Technology Data Exchange (ETDEWEB)

    Putnam, T.M.

    1987-09-01

    This report presents the objectives, organization, policies, and essential rules and procedures that have been adopted by MP Division and that form the basis of the Health and Safety Program of the Clinton P. Anderson Meson Physics Facility (LAMPF). The facility includes the beam-delivery systems for the Los Alamos Neutron Scattering Center and the Weapons Neutron Research Facility (LANSCE/WNR). The program is designed not only to assure the health and safety of all personnel, including users, in their work at LAMPF, and of MP-Division staff in their work on the LANSCE/WNR beam lines, but also to protect the facility (buildings and equipment) and the environment. 33 refs., 18 figs., 2 tabs.

  13. Whistleblowing on health, welfare and safety: the UK experience.

    Science.gov (United States)

    Vinten, Gerald; Gavin, Thomas A

    2005-01-01

    This article takes a look at how whistleblowing has changed over the last 25 years highlighting some well-known cases and focusing on the areas of health and safety, health services and social services. The article also covers government legislation and the lead taken by professional bodies to encourage and support whistleblowers.

  14. Advancing the framework for considering the effects of climate change on worker safety and health.

    Science.gov (United States)

    Schulte, P A; Bhattacharya, A; Butler, C R; Chun, H K; Jacklitsch, B; Jacobs, T; Kiefer, M; Lincoln, J; Pendergrass, S; Shire, J; Watson, J; Wagner, G R

    2016-11-01

    In 2009, a preliminary framework for how climate change could affect worker safety and health was described. That framework was based on a literature search from 1988-2008 that supported seven categories of climate-related occupational hazards: (1) increased ambient temperature; (2) air pollution; (3) ultraviolet radiation exposure; (4) extreme weather; (5) vector-borne diseases and expanded habitats; (6) industrial transitions and emerging industries; and (7) changes in the built environment. This article reviews the published literature from 2008-2014 in each of the seven categories. Additionally, three new topics related to occupational safety and health are considered: mental health effects, economic burden, and potential worker safety and health impacts associated with the nascent field of climate intervention (geoengineering). Beyond updating the literature, this article also identifies key priorities for action to better characterize and understand how occupational safety and health may be associated with climate change events and ensure that worker health and safety issues are anticipated, recognized, evaluated, and mitigated. These key priorities include research, surveillance, risk assessment, risk management, and policy development. Strong evidence indicates that climate change will continue to present occupational safety and health hazards, and this framework may be a useful tool for preventing adverse effects to workers.

  15. 48 CFR 970.5223-1 - Integration of environment, safety, and health into work planning and execution.

    Science.gov (United States)

    2010-10-01

    ..., safety, and health into work planning and execution. 970.5223-1 Section 970.5223-1 Federal Acquisition... Integration of environment, safety, and health into work planning and execution. As prescribed in 970.2303-3(b), insert the following clause: Integration of Environment, Safety, and Health Into Work Planning and...

  16. 48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

    Science.gov (United States)

    2010-10-01

    ... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

  17. Assessment of Health, Safety and Environmental Risks of Zahedan City Gasoline Stations

    Directory of Open Access Journals (Sweden)

    S. Y. Far

    2018-04-01

    Full Text Available The purpose of this study was to assess the risk and determine the health, safety and environmental status of fuel stations in Zahedan. In this study, failure mode and effects analysis (FMEA method was used for risk assessment in accordance with the HSE guidelines, national and international standards and laws. In this cross-sectional study, 2 governmental stations and 6 active private stations were evaluated after the necessary coordination with the relevant units. As a result of risk assessment, 27 health risks, 55 safety risks and 22 environmental risks were identified. From among all the identified risks, 67 risks had a Risk Priority Number (RPN of less than 91, 31 risks had an RPN ranging between 91 and 201, and 6 risks had an RPN of over 201. The findings of the study indicated that compliance with the HSE requirements was 51.85%, in the area of health, 47.57% in the area of safety and 27.45% in the environmental area. Overall compliance with the HSE requirements was 42.54%. In order to distribute fuel considering health, reducing risk and increasing compliance with the requirements for safety improvement, health and environmental conditions of fuel supplies are essential.

  18. Using systematic review in occupational safety and health.

    Science.gov (United States)

    Howard, John; Piacentino, John; MacMahon, Kathleen; Schulte, Paul

    2017-11-01

    Evaluation of scientific evidence is critical in developing recommendations to reduce risk. Healthcare was the first scientific field to employ a systematic review approach for synthesizing research findings to support evidence-based decision-making and it is still the largest producer and consumer of systematic reviews. Systematic reviews in the field of occupational safety and health are being conducted, but more widespread use and adoption would strengthen assessments. In 2016, NIOSH asked RAND to develop a framework for applying the traditional systematic review elements to the field of occupational safety and health. This paper describes how essential systematic review elements can be adapted for use in occupational systematic reviews to enhance their scientific quality, objectivity, transparency, reliability, utility, and acceptability. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

  19. Proactive safety management in health care : towards a broader view of risk analysis, error recovery, and safety culture

    NARCIS (Netherlands)

    Habraken, M.M.P.

    2010-01-01

    Medical errors occur frequently. The harm and additional costs associated with those errors ask for effective safety management. According to the objective of minimal patient harm, safety management in health care should be proactive; that is, risks should be anticipated and reduced before patients

  20. Organized labor and the origins of the Occupational Safety and Health Act.

    Science.gov (United States)

    Asher, Robert

    2014-11-01

    New Solutions is republishing this 1991 article by Robert Asher, which reviews the history of organized labor's efforts in the United States to secure health and safety protections for workers. The 1877 passage of the Massachusetts factory inspection law and the implementation of primitive industrial safety inspection systems in many states paralleled labor action for improved measures to protect workers' health and safety. In the early 1900s labor was focusing on workers' compensation laws. The New Deal expanded the federal government's role in worker protection, supported at least by the Congress of Industrial Organizations (CIO), but challenged by industry and many members of the U.S. Congress. The American Federation of Labor (AFL) and the CIO backed opposing legal and inspection strategies in the late 1940s and through the 1950s. Still, by the late 1960s, several unions were able to help craft the Occupational Safety and Health Act of 1970 and secure new federal protections for U.S. workers.