WorldWideScience

Sample records for safety factor sf

  1. Correlated physical and mental health summary scores for the SF-36 and SF-12 Health Survey, V.1

    Directory of Open Access Journals (Sweden)

    Cunningham William E

    2007-09-01

    Full Text Available Abstract Background The SF-36 and SF-12 summary scores were derived using an uncorrelated (orthogonal factor solution. We estimate SF-36 and SF-12 summary scores using a correlated (oblique physical and mental health factor model. Methods We administered the SF-36 to 7,093 patients who received medical care from an independent association of 48 physician groups in the western United States. Correlated physical health (PCSc and mental health (MCSc scores were constructed by multiplying each SF-36 scale z-score by its respective scoring coefficient from the obliquely rotated two factor solution. PCSc-12 and MCSc-12 scores were estimated using an approach similar to the one used to derive the original SF-12 summary scores. Results The estimated correlation between SF-36 PCSc and MCSc scores was 0.62. There were far fewer negative factor scoring coefficients for the oblique factor solution compared to the factor scoring coefficients produced by the standard orthogonal factor solution. Similar results were found for PCSc-12, and MCSc-12 summary scores. Conclusion Correlated physical and mental health summary scores for the SF-36 and SF-12 derived from an obliquely rotated factor solution should be used along with the uncorrelated summary scores. The new scoring algorithm can reduce inconsistent results between the SF-36 scale scores and physical and mental health summary scores reported in some prior studies. (Subscripts C = correlated and UC = uncorrelated

  2. The Human Splicing Factor ASF/SF2 can Specifically Recognize Pre-mRNA 5' Splice Sites

    Science.gov (United States)

    Zuo, Ping; Manley, James L.

    1994-04-01

    ASF/SF2 is a human protein previously shown to function in in vitro pre-mRNA splicing as an essential factor necessary for all splices and also as an alternative splicing factor, capable of switching selection of 5' splice sites. To begin to study the protein's mechanism of action, we have investigated the RNA binding properties of purified recombinant ASF/SF2. Using UV crosslinking and gel shift assays, we demonstrate that the RNA binding region of ASF/SF2 can interact with RNA in a sequence-specific manner, recognizing the 5' splice site in each of two different pre-mRNAs. Point mutations in the 5' splice site consensus can reduce binding by as much as a factor of 100, with the largest effects observed in competition assays. These findings support a model in which ASF/SF2 aids in the recognition of pre-mRNA 5' splice sites.

  3. Prenatal nicotinic exposure suppresses fetal adrenal steroidogenesis via steroidogenic factor 1 (SF-1) deacetylation

    Energy Technology Data Exchange (ETDEWEB)

    Yan, You-e [Department of Pharmacology, Basic Medical School of Wuhan University, Wuhan (China); Liu, Lian [Department of Pharmacology, Basic Medical School of Wuhan University, Wuhan (China); Department of Pharmacology, Medical School of Yangtze University, Jingzhou 434000 (China); Wang, Jian-fei; Liu, Fang; Li, Xiao-hai; Qin, Hai-quan [Department of Pharmacology, Basic Medical School of Wuhan University, Wuhan (China); Wang, Hui, E-mail: wanghui19@whu.edu.cn [Department of Pharmacology, Basic Medical School of Wuhan University, Wuhan (China); Hubei Provincial Key Laboratory of Developmentally Originated Disease, Wuhan 430071 (China)

    2014-06-15

    This study aimed to investigate the suppressive effect of nicotine on fetal adrenal steroidogenesis and to explore the potential role of epigenetic modification of steroidogenic factor-1 (SF-1) transcriptional activity in this process. Nicotine was intragastrically administered to pregnant rats and NCI-H295A cells were treated with nicotine or trichostatin A (TSA). The pathomorphology of fetal adrenals, steroid hormone levels, the expression of SF-1 and its target genes, and histone deacetylase (HDAC) mRNA were analyzed. Histone modification and DNA methylation of the SF-1 promoter region were assessed using chromatin immunoprecipitation (ChIP) and bisulfite sequencing PCR. The interaction between SF1 and its target genes was observed. Prenatal nicotinic exposure decreased fetal body weight, increased the IUGR rate and caused detrimental changes in fetal adrenal. In addition, the levels of corticosterone, the expression of SF-1 and its target genes were decreased while HDAC2 expression was enhanced. Nicotine treatment decreased histone H3K9 and H3K14 acetylation levels while there was no effect on the methylation frequency on the SF-1 promoter region. Furthermore, in nicotine-treated NCI-H295A cells, lower levels of steroidogenic synthesis, lower expression of SF-1 and its target genes were observed while the expression of HDACs was enhanced. The interaction between SF1 and StAR decreased with nicotine treatment. Nicotine treatment decreased histone H3K9 and H3K14 acetylation levels, and addition of TSA reversed the inhibition of nicotine-mediated SF-1 and its partial target genes. Thus, nicotine-mediated reduction of SF-1 expression resulted in an inhibitory effect on the expression of its target genes and steroid production via histone deacetylation. - Highlights: • Prenatal nicotine-exposed suppresses fetal adrenal steroidogenesis. • Nicotine-supressed fetal adrenal steroidogenesis is related to SF-1 deacetylation. • Prenatal nicotinic exposure decreased

  4. Prenatal nicotinic exposure suppresses fetal adrenal steroidogenesis via steroidogenic factor 1 (SF-1) deacetylation

    International Nuclear Information System (INIS)

    Yan, You-e; Liu, Lian; Wang, Jian-fei; Liu, Fang; Li, Xiao-hai; Qin, Hai-quan; Wang, Hui

    2014-01-01

    This study aimed to investigate the suppressive effect of nicotine on fetal adrenal steroidogenesis and to explore the potential role of epigenetic modification of steroidogenic factor-1 (SF-1) transcriptional activity in this process. Nicotine was intragastrically administered to pregnant rats and NCI-H295A cells were treated with nicotine or trichostatin A (TSA). The pathomorphology of fetal adrenals, steroid hormone levels, the expression of SF-1 and its target genes, and histone deacetylase (HDAC) mRNA were analyzed. Histone modification and DNA methylation of the SF-1 promoter region were assessed using chromatin immunoprecipitation (ChIP) and bisulfite sequencing PCR. The interaction between SF1 and its target genes was observed. Prenatal nicotinic exposure decreased fetal body weight, increased the IUGR rate and caused detrimental changes in fetal adrenal. In addition, the levels of corticosterone, the expression of SF-1 and its target genes were decreased while HDAC2 expression was enhanced. Nicotine treatment decreased histone H3K9 and H3K14 acetylation levels while there was no effect on the methylation frequency on the SF-1 promoter region. Furthermore, in nicotine-treated NCI-H295A cells, lower levels of steroidogenic synthesis, lower expression of SF-1 and its target genes were observed while the expression of HDACs was enhanced. The interaction between SF1 and StAR decreased with nicotine treatment. Nicotine treatment decreased histone H3K9 and H3K14 acetylation levels, and addition of TSA reversed the inhibition of nicotine-mediated SF-1 and its partial target genes. Thus, nicotine-mediated reduction of SF-1 expression resulted in an inhibitory effect on the expression of its target genes and steroid production via histone deacetylation. - Highlights: • Prenatal nicotine-exposed suppresses fetal adrenal steroidogenesis. • Nicotine-supressed fetal adrenal steroidogenesis is related to SF-1 deacetylation. • Prenatal nicotinic exposure decreased

  5. Safety Test Report for the PWR S/F Dry Storage System

    Energy Technology Data Exchange (ETDEWEB)

    Seo, K. S.; Lee, J. H.; Koo, K. H.; Lee, J. C.; Choi, W. S.; Bang, K. S.; Park, H. Y.; Jang, S. Y

    2008-10-15

    This is contract report conducted by KAERI under the contract with NETEC for safety test for the PWR S/F dry storage system. Leak Test was performed after drop test and turn-over test, the measured leakage rate was lower than allowable leakage rate. It is revealed that the containment integrity of the dry storage system is maintained. In the seismic test, the moving of the model was measured at SRTH seismic response of 0.4 g and 0.8 g. Therefore the seismic test results can be used fully to the test data for verification of the seismic analysis. In the thermal test, the direction of the inlet and outlet of the air has no effect on the heat transfer performance. The passive heat removal system of the horizontal storage module was designed well.

  6. The Norwegian Computerized Adaptive Test of Personality Disorder-Static Form (CAT-PD-SF): Reliability, Factor Structure, and Relationships With Personality Functioning.

    Science.gov (United States)

    Thimm, Jens C

    2017-12-01

    The Computerized Adaptive Test of Personality Disorder-Static Form (CAT-PD-SF) is a self-report inventory developed to assess pathological personality traits. The current study explored the reliability and higher order factor structure of the Norwegian version of the CAT-PD-SF and the relationships between the CAT-PD traits and domains of personality functioning in an undergraduate student sample ( N = 375). In addition to the CAT-PD-SF, the short form of the Severity Indices of Personality Problems and the Brief Symptom Inventory were administered. The results showed that the Norwegian CAT-PD-SF has good score reliability. Factor analysis of the CAT-PD-SF scales indicated five superordinate factors that correspond to the trait domains of the alternative DSM-5 model for personality disorders. The CAT-PD traits were highly predictive of impaired personality functioning after controlling for psychological distress. It is concluded that the CAT-PD-SF is a promising tool for the assessment of personality disorder traits.

  7. RRM domain of Arabidopsis splicing factor SF1 is important for pre-mRNA splicing of a specific set of genes

    KAUST Repository

    Lee, Keh Chien

    2017-04-11

    The RNA recognition motif of Arabidopsis splicing factor SF1 affects the alternative splicing of FLOWERING LOCUS M pre-mRNA and a heat shock transcription factor HsfA2 pre-mRNA. Splicing factor 1 (SF1) plays a crucial role in 3\\' splice site recognition by binding directly to the intron branch point. Although plant SF1 proteins possess an RNA recognition motif (RRM) domain that is absent in its fungal and metazoan counterparts, the role of the RRM domain in SF1 function has not been characterized. Here, we show that the RRM domain differentially affects the full function of the Arabidopsis thaliana AtSF1 protein under different experimental conditions. For example, the deletion of RRM domain influences AtSF1-mediated control of flowering time, but not the abscisic acid sensitivity response during seed germination. The alternative splicing of FLOWERING LOCUS M (FLM) pre-mRNA is involved in flowering time control. We found that the RRM domain of AtSF1 protein alters the production of alternatively spliced FLM-β transcripts. We also found that the RRM domain affects the alternative splicing of a heat shock transcription factor HsfA2 pre-mRNA, thereby mediating the heat stress response. Taken together, our results suggest the importance of RRM domain for AtSF1-mediated alternative splicing of a subset of genes involved in the regulation of flowering and adaptation to heat stress.

  8. The Iranian version of 12-item Short Form Health Survey (SF-12: factor structure, internal consistency and construct validity

    Directory of Open Access Journals (Sweden)

    Mousavi Sayed

    2009-09-01

    Full Text Available Abstract Background The 12-item Short Form Health Survey (SF-12 as a shorter alternative of the SF-36 is largely used in health outcomes surveys. The aim of this study was to validate the SF-12 in Iran. Methods A random sample of the general population aged 15 years and over living in Tehran, Iran completed the SF-12. Reliability was estimated using internal consistency and validity was assessed using known groups comparison and convergent validity. In addition, the factor structure of the questionnaire was extracted by performing both exploratory factor analysis (EFA and confirmatory factor analysis (CFA. Results: In all, 5587 individuals were studied (2721 male and 2866 female. The mean age and formal education of the respondents were 35.1 (SD = 15.4 and 10.2 (SD = 4.4 years respectively. The results showed satisfactory internal consistency for both summary measures, that are the Physical Component Summary (PCS and the Mental Component Summary (MCS; Cronbach's α for PCS-12 and MCS-12 was 0.73 and 0.72, respectively. Known-groups comparison showed that the SF-12 discriminated well between men and women and those who differed in age and educational status (P Conclusion In general the findings suggest that the SF-12 is a reliable and valid measure of health related quality of life among Iranian population. However, further studies are needed to establish stronger psychometric properties for this alternative form of the SF-36 Health Survey in Iran.

  9. The Iranian version of 12-item Short Form Health Survey (SF-12): factor structure, internal consistency and construct validity.

    Science.gov (United States)

    Montazeri, Ali; Vahdaninia, Mariam; Mousavi, Sayed Javad; Omidvari, Speideh

    2009-09-16

    The 12-item Short Form Health Survey (SF-12) as a shorter alternative of the SF-36 is largely used in health outcomes surveys. The aim of this study was to validate the SF-12 in Iran. A random sample of the general population aged 15 years and over living in Tehran, Iran completed the SF-12. Reliability was estimated using internal consistency and validity was assessed using known groups comparison and convergent validity. In addition, the factor structure of the questionnaire was extracted by performing both exploratory factor analysis (EFA) and confirmatory factor analysis (CFA). In all, 5587 individuals were studied (2721 male and 2866 female). The mean age and formal education of the respondents were 35.1 (SD = 15.4) and 10.2 (SD = 4.4) years respectively. The results showed satisfactory internal consistency for both summary measures, that are the Physical Component Summary (PCS) and the Mental Component Summary (MCS); Cronbach's alpha for PCS-12 and MCS-12 was 0.73 and 0.72, respectively. Known-groups comparison showed that the SF-12 discriminated well between men and women and those who differed in age and educational status (P < 0.001). In addition, correlations between the SF-12 scales and single items showed that the physical functioning, role physical, bodily pain and general health subscales correlated higher with the PCS-12 score, while the vitality, social functioning, role emotional and mental health subscales more correlated with the MCS-12 score lending support to its good convergent validity. Finally the principal component analysis indicated a two-factor structure (physical and mental health) that jointly accounted for 57.8% of the variance. The confirmatory factory analysis also indicated a good fit to the data for the two-latent structure (physical and mental health). In general the findings suggest that the SF-12 is a reliable and valid measure of health related quality of life among Iranian population. However, further studies are needed to

  10. What factors influence the health status of patients with rheumatoid arthritis measured by the SF-12v2 Health Survey and the Health Assessment Questionnaire?

    DEFF Research Database (Denmark)

    Linde, Louise; Sørensen, Jan; Østergaard, Mikkel

    2009-01-01

    OBJECTIVE: The Health Assessment Questionnaire Disability Index (HAQ) is a widely used outcome measure in rheumatoid arthritis (RA), whereas the SF-12v2 Health Survey (SF-12) was introduced recently. We investigated how the HAQ and SF-12 were associated with socio-demographic, lifestyle, and dise...... to differences in demographic, lifestyle, and disease- and treatment-related factors than the SF-12. The established clinical value and feasibility of the HAQ highlights its advantages over the SF-12 in describing health status in RA.......OBJECTIVE: The Health Assessment Questionnaire Disability Index (HAQ) is a widely used outcome measure in rheumatoid arthritis (RA), whereas the SF-12v2 Health Survey (SF-12) was introduced recently. We investigated how the HAQ and SF-12 were associated with socio-demographic, lifestyle......, and disease- and treatment-related factors in patients with RA. METHODS: In RA patients from 11 Danish centers, clinical and patient-reported data, including the HAQ and SF-12, were collected. Three multiple linear regression models were estimated, with the HAQ, SF-12 physical component score (PCS), and SF-12...

  11. C/EBPβ (CCAAT/enhancer-binding protein β) mediates progesterone production through transcriptional regulation in co-operation with SF-1 (steroidogenic factor-1).

    Science.gov (United States)

    Mizutani, Tetsuya; Ju, Yunfeng; Imamichi, Yoshitaka; Osaki, Tsukasa; Yazawa, Takashi; Kawabe, Shinya; Ishikane, Shin; Matsumura, Takehiro; Kanno, Masafumi; Kamiki, Yasue; Kimura, Kohei; Minamino, Naoto; Miyamoto, Kaoru

    2014-06-15

    The transcription factor SF-1 (steroidogenic factor-1) is a master regulator of steroidogenesis. Previously, we have found that SF-1 induces the differentiation of mesenchymal stem cells into steroidogenic cells. To elucidate the molecular mechanisms of SF-1-mediated functions, we attempted to identify protein components of the SF-1 nuclear protein complex in differentiated cells. SF-1 immunoaffinity chromatography followed by MS/MS analysis was performed, and 24 proteins were identified. Among these proteins, we focused on C/EBPβ (CCAAT/enhancer-binding protein β), which is an essential transcription factor for ovulation and luteinization, as the transcriptional mechanisms of C/EBPβ working together with SF-1 are poorly understood. C/EBPβ knockdown attenuated cAMP-induced progesterone production in granulosa tumour-derived KGN cells by altering STAR (steroidogenic acute regulatory protein), CYP11A1 (cytochrome P450, family 11, subfamily A, polypeptide 1) and HSD3B2 (hydroxy-δ-5-steroid dehydrogenase, 3β- and steroid δ-isomerase 2) expression. EMSA and ChIP assays revealed novel C/EBPβ-binding sites in the upstream regions of the HSD3B2 and CYP11A1 genes. These interactions were enhanced by cAMP stimulation. Luciferase assays showed that C/EBPβ-responsive regions were found in each promoter and C/EBPβ is involved in the cAMP-induced transcriptional activity of these genes together with SF-1. These results indicate that C/EBPβ is an important mediator of progesterone production by working together with SF-1, especially under tropic hormone-stimulated conditions.

  12. The relationship between SF-6D utility scores and lifestyle factors across three life stages: evidence from the Australian Longitudinal Study on Women's Health.

    Science.gov (United States)

    Kanesarajah, Jeeva; Waller, Michael; Whitty, Jennifer A; Mishra, Gita D

    2017-06-01

    To investigate how SF-6D utility scores change with age between generations of women and to quantify the relationship of SF-6D with lifestyle factors across life stages. Up to seven waves of self-reported, longitudinal data were drawn for the 1973-1978 (young, N = 13772), 1946-1951 (mid-age, N = 12792), 1921-1926 (older, N = 9972) cohorts from the Australian Longitudinal Study on Women's Health. Mixed effects models were employed for analysis. Young and mid-age women had similar average SF-6D scores at baseline (0.63-0.64), which remained consistent over the 16-year period. However, older women had lower scores at baseline at 0.57 which steadily declined over 15 years. Across cohorts, low education attainment, greater difficulty in managing income, obesity, physical inactivity, heavy smoking, no alcohol consumption, and increasing stress levels were associated with lower SF-6D scores. The magnitude of effect varied between cohorts. SF-6D scores were lower amongst young women with high-risk drinking behaviours than low-risk drinkers. Mid-age women, who were underweight, never married, or underwent surgical menopause also reported lower SF-6D scores. Older women who lived in remote areas, who were ex-smokers, or were underweight, reported lower SF-6D scores. The SF-6D utility score is sensitive to differences in lifestyle factors across adult life stages. Gradual loss of physical functioning may explain the steady decline in health for older women. Key factors associated with SF-6D include physical activity, body mass index, menopause status, smoking, alcohol use, and stress. Factors associated with poorer SF-6D scores vary in type and magnitude at different life stages.

  13. The RNA splicing factor ASF/SF2 inhibits human topoisomerase I mediated DNA relaxation

    DEFF Research Database (Denmark)

    Andersen, Félicie Faucon; Tange, Thomas Ø.; Sinnathamby, Thayaline

    2002-01-01

    Human topoisomerase I interacts with and phosphorylates the SR-family of RNA splicing factors, including ASF/SF2, and has been suggested to play an important role in the regulation of RNA splicing. Here we present evidence to support the theory that the regulation can go the other way around...

  14. Analysis of factors affecting baseline SF-36 Mental Component Summary in Adult Spinal Deformity and its impact on surgical outcomes.

    Science.gov (United States)

    Mmopelwa, Tiro; Ayhan, Selim; Yuksel, Selcen; Nabiyev, Vugar; Niyazi, Asli; Pellise, Ferran; Alanay, Ahmet; Sanchez Perez Grueso, Francisco Javier; Kleinstuck, Frank; Obeid, Ibrahim; Acaroglu, Emre

    2018-03-01

    To identify the factors that affect SF-36 mental component summary (MCS) in patients with adult spinal deformity (ASD) at the time of presentation, and to analyse the effect of SF-36 MCS on clinical outcomes in surgically treated patients. Prospectively collected data from a multicentric ASD database was analysed for baseline parameters. Then, the same database for surgically treated patients with a minimum of 1-year follow-up was analysed to see the effect of baseline SF-36 MCS on treatment results. A clinically useful SF-36 MCS was determined by ROC Curve analysis. A total of 229 patients with the baseline parameters were analysed. A strong correlation between SF-36 MCS and SRS-22, ODI, gender, and diagnosis were found (p baseline SF-36 MCS (p baseline SF-36 MCS in an ASD population are other HRQOL parameters such as SRS-22 and ODI as well as the baseline thoracic kyphosis and gender. This study has also demonstrated that baseline SF-36 MCS does not necessarily have any effect on the treatment results by surgery as assessed by SRS-22 or ODI. Level III, prognostic study. Copyright © 2018 Turkish Association of Orthopaedics and Traumatology. Production and hosting by Elsevier B.V. All rights reserved.

  15. Genome-wide identification of SF1 and SF2 helicases from archaea.

    Science.gov (United States)

    Chamieh, Hala; Ibrahim, Hiba; Kozah, Juliana

    2016-01-15

    Archaea microorganisms have long been used as model organisms for the study of protein molecular machines. Archaeal proteins are particularly appealing to study since archaea, even though prokaryotic, possess eukaryotic-like cellular processes. Super Family I (SF1) and Super Family II (SF2) helicase families have been studied in many model organisms, little is known about their presence and distribution in archaea. We performed an exhaustive search of homologs of SF1 and SF2 helicase proteins in 95 complete archaeal genomes. In the present study, we identified the complete sets of SF1 and SF2 helicases in archaea. Comparative analysis between archaea, human and the bacteria E. coli SF1 and SF2 helicases, resulted in the identification of seven helicase families conserved among representatives of the domains of life. This analysis suggests that these helicase families are highly conserved throughout evolution. We highlight the conserved motifs of each family and characteristic domains of the detected families. Distribution of SF1/SF2 families show that Ski2-like, Lhr, Sfth and Rad3-like helicases are ubiquitous among archaeal genomes while the other families are specific to certain archaeal groups. We also report the presence of a novel SF2 helicase specific to archaea domain named Archaea Specific Helicase (ASH). Phylogenetic analysis indicated that ASH has evolved in Euryarchaeota and is evolutionary related to the Ski2-like family with specific characteristic domains. Our study provides the first exhaustive analysis of SF1 and SF2 helicases from archaea. It expands the variety of SF1 and SF2 archaeal helicases known to exist to date and provides a starting point for new biochemical and genetic studies needed to validate their biological functions. Copyright © 2015 Elsevier B.V. All rights reserved.

  16. Sf29 Gene of Spodoptera frugiperda Multiple Nucleopolyhedrovirus Is a Viral Factor That Determines the Number of Virions in Occlusion Bodies▿

    Science.gov (United States)

    Simón, Oihane; Williams, Trevor; Asensio, Aaron C.; Ros, Sarhay; Gaya, Andrea; Caballero, Primitivo; Possee, Robert D.

    2008-01-01

    The genome of Spodoptera frugiperda multiple nucleopolyhedrovirus (NPV) was inserted into a bacmid (Sfbac) and used to produce a mutant lacking open reading frame 29 (Sf29null). Sf29null bacmid DNA was able to generate an infection in S. frugiperda. Approximately six times less DNA was present in occlusion bodies (OBs) produced by the Sf29null bacmid in comparison to viruses containing this gene. This reduction in DNA content was consistent with fewer virus particles being packaged within Sf29null bacmid OBs, as determined by fractionation of dissolved polyhedra and comparison of occlusion-derived virus (ODV) infectivity in cell culture. DNA from Sfbac, Sf29null, or Sf29null-repair, in which the gene deletion had been repaired, were equally infectious when used to transfect S. frugiperda. All three viruses produced similar numbers of OBs, although those from Sf29null were 10-fold less infectious than viruses with the gene. Insects infected with Sf29null bacmid died ∼24 h later than positive controls, consistent with the reduced virus particle content of Sf29null OBs. Transcripts from Sf29 were detected in infected insects 12 h prior to those from the polyhedrin gene. Homologs to Sf29 were present in other group II NPVs, and similar sequences were present in entomopoxviruses. Analysis of the Sf29 predicted protein sequence revealed signal peptide and transmembrane domains, but the presence of 12 potential N-glycosylation sites suggest that it is not an ODV envelope protein. Other motifs, including zinc-binding and threonine-rich regions, suggest degradation and adhesion functions. We conclude that Sf29 is a viral factor that determines the number of ODVs occluded in each OB. PMID:18550678

  17. Cavern disposal concepts for HLW/SF: assuring operational practicality and safety with maximum programme flexibility

    International Nuclear Information System (INIS)

    McKinley, Ian G.; Apted, Mick; Umeki, Hiroyuki; Kawamura, Hideki

    2008-01-01

    Most conventional engineered barrier system (EBS) designs for HLW/SF repositories are based on concepts developed in the 1970s and 1980s that assured feasibility with high margins of safety, in order to convince national decision makers to proceed with geological disposal despite technological uncertainties. In the interval since the advent of such 'feasibility designs', significant progress has been made in reducing technological uncertainties, which has lead to a growing awareness of other, equally important uncertainties in operational implementation and challenges regarding social acceptance in many new, emerging national repository programs. As indicated by the NUMO repository concept catalogue study (NUMO, 2004), there are advantages in reassessing how previous designs can be modified and optimised in the light of improved system understanding, allowing a robust EBS to be flexibly implemented to meet nation-specific and site-specific conditions. Full-scale emplacement demonstrations, particularly those carried out underground, have highlighted many of the practical issues to be addressed; e.g., handling of compacted bentonite in humid conditions, use of concrete for support infrastructure, remote handling of heavy radioactive packages in confined conditions, quality inspection, monitoring / ease of retrieval of emplaced packages and institutional control. The CAvern REtrievable (CARE) concept reduces or avoids such issues by emplacement of HLW or SF within multi-purpose transportation / storage / disposal casks in large ventilated caverns at a depth of several hundred metres. The facility allows the caverns to serve as inspectable stores for an extended period of time (up to a few hundred years) until a decision is made to close them. At this point the caverns are backfilled and sealed as a final repository, effectively with the same safety case components as conventional 'feasibility designs'. In terms of operational practicality an d safety, the CARE

  18. Dielectric properties for SF6 and SF6 mixtures predicted from basic data

    International Nuclear Information System (INIS)

    Kline, L.E.; Davies, D.K.; Chen, C.L.; Chantry, P.J.

    1979-01-01

    We have calculated α and eta, the ionization and attachment coefficients, and (E/N) *, the limiting breakdown electric-field--to--gas-density ratio, in SF 6 and SF 6 mixtures by numerically solving the Boltzmann equation for the electron energy distribution. The calculations require a knowledge of several electron collision cross sections. Published momentum transfer and ionization cross sections for SF 6 were used. We measured various attachment cross sections for SF 6 using electron-beam techniques with mass spectrometric ion detection. We determined a total cross section for electronic excitation of SF 6 by comparing the predicted values of α, eta, and (E/N) * with our measured values obtained from spatial current growth experiments in SF 6 in uniform fields over an extended range of E/N. With this self-consistent set of SF 6 cross sections, together with published He and N 2 cross sections, it was then possible to predict the dielectric properties of SF 6 -He and SF 6 -N 2 mixtures. Published experimental values of α for the SF 6 -He mixtures lie between the values of α calculated with and without ionization of SF 6 by excited He atoms. Published experimental values of (E/N) * agree with our calculations to within 5% in both the SF 6 -He and the SF 6 -N 2 mixtures

  19. The "11K" gene family members sf68, sf95 and sf138 modulate transmissibility and insecticidal properties of Spodoptera frugiperda multiple nucleopolyhedrovirus.

    Science.gov (United States)

    Beperet, Inés; Simón, Oihane; Williams, Trevor; López-Ferber, Miguel; Caballero, Primitivo

    2015-05-01

    The "11K" gene family is notable for having homologs in both baculoviruses and entomopoxviruses and is classified as either type 145 or type 150, according to their similarity with the ac145 or ac150 genes of Autographa californica multiple nucleopolyhedrovirus (AcMNPV). One homolog of ac145 (sf138) and two homologs of ac150 (sf68 and sf95) are present in Spodoptera frugiperda multiple nucleopolyhedrovirus (SfMNPV). Recombinant bacmids lacking sf68, sf95 or sf138 (Sf68null, Sf95null and Sf138null, respectively) and the respective repair bacmids were generated from a bacmid comprising the complete virus genome. Occlusion bodies (OBs) of the Sf138null virus were ∼15-fold less orally infective to insects, which was attributed to a 100-fold reduction in ODV infectious titer. Inoculation of insects with Sf138null OBs in mixtures with an optical brightener failed to restore the pathogenicity of Sf138null OBs to that of the parental virus, indicating that the effects of sf138 deletion on OB pathogenicity were unlikely to involve an interaction with the gut peritrophic matrix. In contrast, deletion of sf68 and sf95 resulted in a slower speed-of-kill by 9h, and a concurrent increase in the yield of OBs. Phylogenetic analysis indicated that sf68 and sf95 were not generated after a duplication event of an ancestral gene homologous to the ac150 gene. We conclude that type 145 genes modulate the primary infection process of the virus, whereas type 150 genes appear to have a role in spreading systemic infection within the insect. Copyright © 2015 Elsevier Inc. All rights reserved.

  20. SF12: Stata module to alidate sf12 input and calculate sf12 version 2 t scores

    DEFF Research Database (Denmark)

    2015-01-01

    sf12 takes 12 variables in correct order (i1 i2a i2b i3a i3b i4a i4b i5 i6a i6b i6c i7), validate the variables with respect to sf12 requirements. Only rows that are correct are used for calculating the sf12 t scores....

  1. Safety demonstration test (SR-3/S1C-3/S2C-3/SF-2) plan using the HTTR. Contract research

    International Nuclear Information System (INIS)

    Nakagawa, Shigeaki; Sakaba, Nariaki; Takamatsu, Kuniyoshi; Takada, Eiji; Tochio, Daisuke; Ohwada, Hiroyuki

    2005-03-01

    Safety demonstration tests using the HTTR are to be conducted from the FY2002 to verify the inherent safety features and to improve the safety design and evaluation technologies for HTGRs, as well as to contribute to not only the commercial HTGRs but also the research and development for the VHTR that is one of the Generation IV reactor candidates. This paper describes the reactivity insertion test (SR-3), the coolant flow reduction test by tripping of gas circulators (S1C-3, S2C-3), and the partial flow loss of coolant test (SF-2) planned in March 2005 with their detailed test method, procedure and results of pre-test analysis. From the analytical results, it was verified that the negative reactivity feedback effect of the core brings the reactor power safely to a stable level without a reactor scram. (author)

  2. Dielectric properties for SF6 and SF6 mixtures predicted from basic data

    International Nuclear Information System (INIS)

    Kline, L.E.; Davies, D.K.; Chen, C.L.; Chantry, P.J.

    1978-01-01

    α and eta, the ionization and attachment coefficients, and (E/N)*, the limiting breakdown electric field-to-gas density ratio, in SF 6 and SF 6 mixtures were calculated by numerically solving the Boltzmann equation for the electron energy distribution. The calculations require a knowledge of several electron collision cross sections. Published momentum transfer and ionization cross sections for SF 6 were used. Various attachment cross sections for SF 6 were measured by using electron beam techniques with mass spectrometric ion detection. A total cross section for electronic excitation of SF 6 was determined by comparing the predicted values of α, eta, and (E/N)* with measured values obtained from spatial current growth experiments in SF 6 in uniform fields over an extended range of E/N. With this self-consistent set of SF 6 cross sections, together with published He cross sections, it was then possible to predict the dielectric properties of SF 6 --He mixtures. Published experimental values of α for these mixtures lie between the values of α calculated with and without ionization of SF 6 by excited He atoms. Published experimental values of (E/N)* agree with the calculations to within 5%. 11 figures

  3. Broad horizons SETI, SF and education

    Science.gov (United States)

    Griffiths, Martin

    2004-04-01

    Science fiction (SF) is often perceived as a ‘fringe’ form of entertainment that excites the socially challenged. This misperception detracts from the critical, scientific and interpretive nature of the genre which can be directed into science teaching at school and university levels as an innovative way of exploring the cultural background, politics, leitmotif and themes of society, science and their operation. One example is the ‘alien’ theme in SF; it is perceptually one of the driving factors in the search for extraterrestrial intelligence (SETI). Such a topic can become an introduction to current technology, the motives and politics of science and the sociological implications inherent in a confrontation with the ideal of man's uniqueness in the cosmos. When applied to the SETI, SF engenders a constructive convergence in studies such as biological determinism, the evolution of life, communication, interstellar travel and methods of contact, thus enriching the consideration of possible life in the cosmos. Adopting elements of SF in lifelong learning therefore enables informed, imaginative reflection and debate that educates, trains and instructs, broadening the potential of students and their future roles by invoking an analysis of vital public, scientific and humanistic fields.

  4. Characterization of an Sf-rhabdovirus-negative Spodoptera frugiperda cell line as an alternative host for recombinant protein production in the baculovirus-insect cell system.

    Science.gov (United States)

    Maghodia, Ajay B; Geisler, Christoph; Jarvis, Donald L

    2016-06-01

    Cell lines derived from the fall armyworm, Spodoptera frugiperda (Sf), are widely used as hosts for recombinant protein production in the baculovirus-insect cell system (BICS). However, it was recently discovered that these cell lines are contaminated with a virus, now known as Sf-rhabdovirus [1]. The detection of this adventitious agent raised a potential safety issue that could adversely impact the BICS as a commercial recombinant protein production platform. Thus, we examined the properties of Sf-RVN, an Sf-rhabdovirus-negative Sf cell line, as a potential alternative host. Nested RT-PCR assays showed Sf-RVN cells had no detectable Sf-rhabdovirus over the course of 60 passages in continuous culture. The general properties of Sf-RVN cells, including their average growth rates, diameters, morphologies, and viabilities after baculovirus infection, were virtually identical to those of Sf9 cells. Baculovirus-infected Sf-RVN and Sf9 cells produced equivalent levels of three recombinant proteins, including an intracellular prokaryotic protein and two secreted eukaryotic glycoproteins, and provided similar N-glycosylation patterns. In fact, except for the absence of Sf-rhabdovirus, the only difference between Sf-RVN and Sf9 cells was SF-RVN produced higher levels of infectious baculovirus progeny. These results show Sf-RVN cells can be used as improved, alternative hosts to circumvent the potential safety hazard associated with the use of Sf-rhabdovirus-contaminated Sf cells for recombinant protein manufacturing with the BICS. Copyright © 2016 Elsevier Inc. All rights reserved.

  5. Genistein promotes DNA demethylation of the steroidogenic factor 1 (SF-1) promoter in endometrial stromal cells

    International Nuclear Information System (INIS)

    Matsukura, Hiroshi; Aisaki, Ken-ichi; Igarashi, Katsuhide; Matsushima, Yuko; Kanno, Jun; Muramatsu, Masaaki; Sudo, Katsuko; Sato, Noriko

    2011-01-01

    Highlights: → Genistein (GEN) is a phytoestrogen found in soy products. → GEN demethylated/unsilenced the steroidogenic factor 1 gene in endometrial tissue. → GEN thus altered mRNA expression in uteri of ovariectomized (OVX) mice. → A high-resolution melting assay was used to screen for epigenetic change. → We isolated an endometrial cell clone that was epigenetically modulated by GEN. -- Abstract: It has recently been demonstrated that genistein (GEN), a phytoestrogen in soy products, is an epigenetic modulator in various types of cells; but its effect on endometrium has not yet been determined. We investigated the effects of GEN on mouse uterine cells, in vivo and in vitro. Oral administration of GEN for 1 week induced mild proliferation of the endometrium in ovariectomized (OVX) mice, which was accompanied by the induction of steroidogenic factor 1 (SF-1) gene expression. GEN administration induced demethylation of multiple CpG sites in the SF-1 promoter; these sites are extensively methylated and thus silenced in normal endometrium. The GEN-mediated promoter demethylation occurred predominantly on the luminal side, as opposed to myometrium side, indicating that the epigenetic change was mainly shown in regenerated cells. Primary cultures of endometrial stromal cell colonies were screened for GEN-mediated alterations of DNA methylation by a high-resolution melting (HRM) method. One out of 20 colony-forming cell clones showed GEN-induced demethylation of SF-1. This clone exhibited a high proliferation capacity with continuous colony formation activity through multiple serial clonings. We propose that only a portion of endometrial cells are capable of receiving epigenetic modulation by GEN.

  6. Genistein promotes DNA demethylation of the steroidogenic factor 1 (SF-1) promoter in endometrial stromal cells

    Energy Technology Data Exchange (ETDEWEB)

    Matsukura, Hiroshi, E-mail: hmatsukura.epi@mri.tmd.ac.jp [Department of Molecular Epidemiology, Medical Research Institute, Tokyo Medical and Dental University, 2-3-10 Kanda-surugadai, Chiyoda-ku, Tokyo 101-0062 (Japan); Aisaki, Ken-ichi; Igarashi, Katsuhide; Matsushima, Yuko; Kanno, Jun [Division of Cellular and Molecular Toxicology, National Institute of Health Sciences, 1-18-1 Kamiyoga, Setagaya-ku, Tokyo 158-8501 (Japan); Muramatsu, Masaaki [Department of Molecular Epidemiology, Medical Research Institute, Tokyo Medical and Dental University, 2-3-10 Kanda-surugadai, Chiyoda-ku, Tokyo 101-0062 (Japan); Sudo, Katsuko [Department of Molecular Epidemiology, Medical Research Institute, Tokyo Medical and Dental University, 2-3-10 Kanda-surugadai, Chiyoda-ku, Tokyo 101-0062 (Japan); Animal Research Center, Tokyo Medical University, 6-1-1 Shinjuku, Shinjuku-ku, Tokyo 160-8402 (Japan); Sato, Noriko, E-mail: nsato.epi@tmd.ac.jp [Department of Molecular Epidemiology, Medical Research Institute, Tokyo Medical and Dental University, 2-3-10 Kanda-surugadai, Chiyoda-ku, Tokyo 101-0062 (Japan)

    2011-08-26

    Highlights: {yields} Genistein (GEN) is a phytoestrogen found in soy products. {yields} GEN demethylated/unsilenced the steroidogenic factor 1 gene in endometrial tissue. {yields} GEN thus altered mRNA expression in uteri of ovariectomized (OVX) mice. {yields} A high-resolution melting assay was used to screen for epigenetic change. {yields} We isolated an endometrial cell clone that was epigenetically modulated by GEN. -- Abstract: It has recently been demonstrated that genistein (GEN), a phytoestrogen in soy products, is an epigenetic modulator in various types of cells; but its effect on endometrium has not yet been determined. We investigated the effects of GEN on mouse uterine cells, in vivo and in vitro. Oral administration of GEN for 1 week induced mild proliferation of the endometrium in ovariectomized (OVX) mice, which was accompanied by the induction of steroidogenic factor 1 (SF-1) gene expression. GEN administration induced demethylation of multiple CpG sites in the SF-1 promoter; these sites are extensively methylated and thus silenced in normal endometrium. The GEN-mediated promoter demethylation occurred predominantly on the luminal side, as opposed to myometrium side, indicating that the epigenetic change was mainly shown in regenerated cells. Primary cultures of endometrial stromal cell colonies were screened for GEN-mediated alterations of DNA methylation by a high-resolution melting (HRM) method. One out of 20 colony-forming cell clones showed GEN-induced demethylation of SF-1. This clone exhibited a high proliferation capacity with continuous colony formation activity through multiple serial clonings. We propose that only a portion of endometrial cells are capable of receiving epigenetic modulation by GEN.

  7. SF6 and the greenhouse effect

    International Nuclear Information System (INIS)

    Gjaerde, Anne Cathrine; Rein, Asgaut; Hegerberg, Rolf; Kulsetaas, John

    1997-01-01

    The gas SF 6 (sulfur hexafluoride) is much used as an insulation medium in electric switchgear and breakers. However, there has been some recent concern about the possible contribution of SF 6 to the global greenhouse effect. This report presents some collected facts about SF 6 emission. The concentration of SF 6 in the atmosphere is very low and will probably remain so until the end of the next century. Hence the contribution of SF 6 to the greenhouse effect is negligible. Most of the SF 6 emission comes from the magnesium and aluminium industries. In 1993, SF 6 emission from switchgear in the Norwegian distribution grid corresponded to only 0.2 per million of the CO 2 emission in Norway. But the quantity of SF 6 accumulated in electric switchgear is considerable. However, losing it to the atmosphere can be avoided by using recirculation or destruction systems for SF 6 in connection with maintenance and replacement of components. Norwegian climate policy aims at taking measures against SF 6 and other climate gases on a par with CO 2 . Taxation measures have been suggested for SF 6 . Atmospheric SF 6 does not influence the ozone layer. 3 refs., 8 figs

  8. Male Role Norms Inventory-Short Form (MRNI-SF): development, confirmatory factor analytic investigation of structure, and measurement invariance across gender.

    Science.gov (United States)

    Levant, Ronald F; Hall, Rosalie J; Rankin, Thomas J

    2013-04-01

    The current study reports the development from the Male Role Norms Inventory-Revised (MRNI-R; Levant, Rankin, Williams, Hasan, & Smalley, 2010) of the 21-item MRNI-Short Form (MRNI-SF). Confirmatory factor analysis of MRNI-SF responses from a sample of 1,017 undergraduate participants (549 men, 468 women) indicated that the best fitting "bifactor" model incorporated the hypothesized 7-factor structure while explicitly modeling an additional, general traditional masculinity ideology factor. Specifically, each item-level indicator loaded on 2 factors: a general traditional masculinity ideology factor and a specific factor corresponding to 1 of the 7 hypothesized traditional masculinity ideology norms. The bifactor model was assessed for measurement invariance across gender groups, with findings of full configural invariance and partial metric invariance, such that factor loadings were equivalent across the gender groups for the 7 specific factors but not for the general traditional masculinity ideology factor. Theoretical explanations for this latter result include the potential that men's sense of self or identity may be engaged when responding to questions asking to what extent they agree or disagree with normative statements about their behavior, a possibility that could be investigated in future research by examining the associations of the general and specific factors with measures of masculine identity. Additional exploratory invariance analyses demonstrated latent mean differences between men and women on 4 of the 8 factors, and equivocal results for invariance of item intercepts, item uniquenesses, and factor variances-covariances.

  9. Design of an artificial intelligence system for safety function maintenance

    International Nuclear Information System (INIS)

    Sharma, D.D.; Miller, D.W.; Chandrasekaran, B.

    1985-01-01

    The safety function (SF) maintenance concept provides a systematic approach to mitigate the consequences of an unforeseen event. Safety functions are a set of actions for mitigating or limiting consequences of a safety threatening event. The current approach to SF maintenance of selecting a success path (SP) from a library of predefined SPs is inadequate because it includes only anticipated modes of challenging an SF. To cover all possible modes of challenging an SF, the library of success paths would be extremely large and difficult to implement on any existing computer. In this paper the authors describe a method based on artificial intelligence (AI) theory of planning to synthesize an SP using available resources to satisfy a hierarchy of safety goals. The method has been applied to SF maintenance of a boiling water reactor (BWR) using data from the Perry nuclear power plant

  10. Psychological factors related to physical, social, and mental dimensions of the SF-36: a population-based study of middle-aged women and men

    Directory of Open Access Journals (Sweden)

    Evalill Nilsson

    2010-10-01

    Full Text Available Evalill Nilsson1, Margareta Kristenson21Department of Social and Welfare Studies, Linköping University, Linköping, Sweden; 2Department of Medicine and Health, Division of Community Medicine/Social Medicine and Public Health Sciences, Linköping University, Linköping, SwedenBackground: Measures of health-related quality of life (HRQoL are increasingly used as patient-reported outcome measures in routine health care. Research on determinants and correlates of HRQoL has, therefore, grown in importance. Earlier studies have generally been patient-based and few of them have examined differences between women and men. The aim of this study was to explore the relationship between psychological factors and physical, social, and mental dimensions of HRQoL, as measured by the Medical Outcome Study Short Form-36 Health Survey (SF-36, in a normal population and to see if observed relations were the same for women and men.Methods: Relations between scale scores for the eight scales of SF-36 and scale scores for Self-esteem, Sense of Coherence, Perceived Control, Depressed Mood (CES-D, and Cynicism were assessed through partial correlation and multiple linear regression analyses on a sample of 505 women and 502 men (aged 45–69 years, stratified for sex and adjusted for effects of age, presence of disease, back pain, lifestyle, and social support.Results: All psychological factors tested, except Cynicism, were significantly correlated to all scales of the SF-36 for women and men (Pearson product-moment partial correlation coefficient, |r| = 0.11–0.63 and |r| = 0.11–0.60, respectively. The addition of psychological factors into regression models resulted in significant total explained variance (R2 changes in all scales of the SF-36 for both sexes. Any discrepancies between women and men pertained more to the strength of relationships rather than the significance of different psychological factors.Conclusion: In this population-based study

  11. Human Factors and Safety Culture in Maritime Safety (revised

    Directory of Open Access Journals (Sweden)

    Heinz Peter Berg

    2013-09-01

    Full Text Available As in every industry at risk, the human and organizational factors constitute the main stakes for maritime safety. Furthermore, several events at sea have been used to develop appropriate risk models. The investigation on maritime accidents is, nowadays, a very important tool to identify the problems related to human factor and can support accident prevention and the improvement of maritime safety. Part of this investigation should in future also be near misses. Operation of ships is full of regulations, instructions and guidelines also addressing human factors and safety culture to enhance safety. However, even though the roots of a safety culture have been established, there are still serious barriers to the breakthrough of the safety management. One of the most common deficiencies in the case of maritime transport is the respective monitoring and documentation usually lacking of adequacy and excellence. Nonetheless, the maritime area can be exemplified from other industries where activities are ongoing to foster and enhance safety culture.

  12. Incremental Validity of the Trait Emotional Intelligence Questionnaire-Short Form (TEIQue-SF).

    Science.gov (United States)

    Siegling, A B; Vesely, Ashley K; Petrides, K V; Saklofske, Donald H

    2015-01-01

    This study examined the incremental validity of the adult short form of the Trait Emotional Intelligence Questionnaire (TEIQue-SF) in predicting 7 construct-relevant criteria beyond the variance explained by the Five-factor model and coping strategies. Additionally, the relative contributions of the questionnaire's 4 subscales were assessed. Two samples of Canadian university students completed the TEIQue-SF, along with measures of the Big Five, coping strategies (Sample 1 only), and emotion-laden criteria. The TEIQue-SF showed consistent incremental effects beyond the Big Five or the Big Five and coping strategies, predicting all 7 criteria examined across the 2 samples. Furthermore, 2 of the 4 TEIQue-SF subscales accounted for the measure's incremental validity. Although the findings provide good support for the validity and utility of the TEIQue-SF, directions for further research are emphasized.

  13. Construct validation of SF-36 Malay version among type 2 diabetes mellitus patients

    Science.gov (United States)

    Yap, Bee Wah; Jannoo, Zeinab; Razali, Nornadiah Mohd; Ghani, Nor Azura Md.; Lazim, Mohamad Alias

    2015-02-01

    The Short Form 36 (SF-36) is one of the most widely used generic health status measure. This study used the SF-36 Health Survey instrument to investigate the functional health and well-being of Malay Type 2 Diabetes Mellitus patients in Malaysia. The survey was carried out in three local hospitals in Selangor. The method of questionnaire administration was both self-administered and interviewer administered. A total of 354 questionnaires was returned, but only 295 questionnaires with no missing data were analyzed. Confirmatory Factor Analysis (CFA) was used to confirm the first-order and third-order CFA models. The higher order analyses included a third-order CFA models with two second-order factors (physical and mental component) and three second-order factors (physical, general well-being and mental health) and both showed satisfactory model fit indices. This study confirmed the multidimensional factor structure of the SF-36.

  14. [Survey on the applicability of SF-36 version-2 (SF-36v2) in assessment quality of life among urban residents in Chengdu city].

    Science.gov (United States)

    Zhao, Longchao; Liu, Zhijun; He, Yan; Li, Ningxiu; Liu, Danping

    2014-05-01

    To explore the psychometric performances and applicability of SF-36v2 in assessment quality of life among urban residents in Chengdu. During Oct. to Dec., 2012, 2 186 adult urban residents with clear mind and well self-express were recruited in the study by multistage stratified cluster sampling method in Chengdu urban area. The survey questionnaires included general health condition and quality of life, which was adopted the SF-36v2. Internal consistency reliability, test-retest reliability and construct validity were all analyzed as indicators of the psychometric performance. The survey released 2 186 questionnaires, with 2 182 ones returned and 2 178(99.8%) met the data standard. The scores of 8 scales in SF-36v2, including physical function (PF), role-physical (RP), bodily pain (BP), general health (GH), vitality (VT), social function (SF), role-emotion (RE) and mental health (MH), were 89.15 ± 17.56, 85.18 ± 22.52, 76.64 ± 17.80, 64.13 ± 19.56, 70.39 ± 17.31, 86.43 ± 17.35, 87.79 ± 19.24 and 80.61 ± 13.49, respectively; the floor effects were 0.28%, 0.41%, 0.23%, 0.28%, 0.09%, 0.05%, 0.14% and 0.23%, respectively; and the ceiling effects were 51.38%, 60.60%, 58.08%, 0.83%, 2.94%, 50.32%, 64.00% and 3.95%, respectively. The item-convergent validities were all achieved the standard (r = 0.40) except the item MH5 (Have you been happy?), and the total scaling success rate of item-convergent validity was 97.14%. The scales' success rates of item-discriminant validities for the SF, VT and MH scales were 93.75%, 56.25% and 97.50% respectively, while the rates of others were 100.00% and the total success rate was 96.43%. The internal reliability ranged from 0.724 to 0.974 across all the scales, except for SF (r = 0.603) and VT (r = 0.697). The two-week test-retest reliability ranged from 0.610 to 0.845. Within factor analysis, two common factors were confirmed, separately representing physical health and mental health, altogether contributing 64.4% of the

  15. Are decisions using cost-utility analyses robust to choice of SF-36/SF-12 preference-based algorithm?

    Directory of Open Access Journals (Sweden)

    Walton Surrey M

    2005-03-01

    Full Text Available Abstract Background Cost utility analysis (CUA using SF-36/SF-12 data has been facilitated by the development of several preference-based algorithms. The purpose of this study was to illustrate how decision-making could be affected by the choice of preference-based algorithms for the SF-36 and SF-12, and provide some guidance on selecting an appropriate algorithm. Methods Two sets of data were used: (1 a clinical trial of adult asthma patients; and (2 a longitudinal study of post-stroke patients. Incremental costs were assumed to be $2000 per year over standard treatment, and QALY gains realized over a 1-year period. Ten published algorithms were identified, denoted by first author: Brazier (SF-36, Brazier (SF-12, Shmueli, Fryback, Lundberg, Nichol, Franks (3 algorithms, and Lawrence. Incremental cost-utility ratios (ICURs for each algorithm, stated in dollars per quality-adjusted life year ($/QALY, were ranked and compared between datasets. Results In the asthma patients, estimated ICURs ranged from Lawrence's SF-12 algorithm at $30,769/QALY (95% CI: 26,316 to 36,697 to Brazier's SF-36 algorithm at $63,492/QALY (95% CI: 48,780 to 83,333. ICURs for the stroke cohort varied slightly more dramatically. The MEPS-based algorithm by Franks et al. provided the lowest ICUR at $27,972/QALY (95% CI: 20,942 to 41,667. The Fryback and Shmueli algorithms provided ICURs that were greater than $50,000/QALY and did not have confidence intervals that overlapped with most of the other algorithms. The ICUR-based ranking of algorithms was strongly correlated between the asthma and stroke datasets (r = 0.60. Conclusion SF-36/SF-12 preference-based algorithms produced a wide range of ICURs that could potentially lead to different reimbursement decisions. Brazier's SF-36 and SF-12 algorithms have a strong methodological and theoretical basis and tended to generate relatively higher ICUR estimates, considerations that support a preference for these algorithms over the

  16. Functional characterization of Bombyx mori nucleopolyhedrovirus late gene transcription and genome replication factors in the non-permissive insect cell line SF-21

    International Nuclear Information System (INIS)

    Berretta, Marcelo F.; Deshpande, Mandar; Crouch, Erin A.; Passarelli, A. Lorena

    2006-01-01

    We compared the abilities of late gene transcription and DNA replication machineries of the baculoviruses Autographa californica nucleopolyhedrovirus (AcMNPV) and Bombyx mori NPV (BmNPV) in SF-21 cells, an insect-derived cell line permissive for AcMNPV infection. It has been well established that 19 AcMNPV late expression factors (lefs) stimulate substantial levels of late gene promoter activity in SF-21 cells. Thus, we constructed a set of clones containing the BmNPV homologs of the AcMNPV lefs under control of the constitutive Drosophila heat shock 70 protein promoter and tested their ability to activate an AcMNPV late promoter-reporter gene cassette in SF-21 cells. We tested the potential of individual or predicted functional groups of BmNPV lefs to successfully replace the corresponding AcMNPV gene(s) in transient late gene expression assays. We found that most, but not all, BmNPV lefs were able to either fully or partially substitute for the corresponding AcMNPV homolog in the context of the remaining AcMNPV lefs with the exception of BmNPV p143, ie-2, and p35. BmNPV p143 was unable to support late gene expression or be imported into the nucleus of cells in the presence of the AcMNPV or the BmNPV LEF-3, a P143 nuclear shuttling factor. Our results suggest that host-specific factors may affect the function of homologous proteins

  17. Steroidogenic factor-1 (SF-1 gene mutation as a frequent cause of primary amenorrhea in 46,XY female adolescents with low testosterone concentration

    Directory of Open Access Journals (Sweden)

    Servant Nadège

    2010-03-01

    Full Text Available Abstract Background Primary amenorrhea due to 46,XY disorders of sex differentiation (DSD is a frequent reason for consultation in endocrine and gynecology clinics. Among the genetic causes of low-testosterone primary amenorrhea due to 46,XY DSD, SRY gene is reported to be frequently involved, but other genes, such as SF1 and WT1, have never been studied for their prevalence. Methods We directly sequenced SRY, SF1 and WT1 genes in 15 adolescent girls with primary amenorrhea, low testosterone concentration, and XY karyotype, to determine the prevalence of mutations. We also analyzed the LH receptor gene in patients with high LH and normal FSH concentrations. Results Among the 15 adolescents with primary amenorrhea and low testosterone concentration, we identified two new SRY mutations, five new SF1 mutations and one new LH receptor gene mutation. Our study confirms the 10-15% prevalence of SRY mutations and shows the high prevalence (33% of SF1 abnormalities in primary amenorrhea due to 46,XY DSD with low plasma testosterone concentration. Conclusions The genetic analysis of low-testosterone primary amenorrhea is complex as several factors may be involved. This work underlines the need to systematically analyze the SF1 sequence in girls with primary amenorrhea due to 46,XY DSD and low testosterone, as well as in newborns with 46,XY DSD.

  18. ARCPHdb: A comprehensive protein database for SF1 and SF2 helicase from archaea.

    Science.gov (United States)

    Moukhtar, Mirna; Chaar, Wafi; Abdel-Razzak, Ziad; Khalil, Mohamad; Taha, Samir; Chamieh, Hala

    2017-01-01

    Superfamily 1 and Superfamily 2 helicases, two of the largest helicase protein families, play vital roles in many biological processes including replication, transcription and translation. Study of helicase proteins in the model microorganisms of archaea have largely contributed to the understanding of their function, architecture and assembly. Based on a large phylogenomics approach, we have identified and classified all SF1 and SF2 protein families in ninety five sequenced archaea genomes. Here we developed an online webserver linked to a specialized protein database named ARCPHdb to provide access for SF1 and SF2 helicase families from archaea. ARCPHdb was implemented using MySQL relational database. Web interfaces were developed using Netbeans. Data were stored according to UniProt accession numbers, NCBI Ref Seq ID, PDB IDs and Entrez Databases. A user-friendly interactive web interface has been developed to browse, search and download archaeal helicase protein sequences, their available 3D structure models, and related documentation available in the literature provided by ARCPHdb. The database provides direct links to matching external databases. The ARCPHdb is the first online database to compile all protein information on SF1 and SF2 helicase from archaea in one platform. This database provides essential resource information for all researchers interested in the field. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. The Arabidopsis splicing factors, AtU2AF65, AtU2AF35, and AtSF1 shuttle between nuclei and cytoplasms

    KAUST Repository

    Park, Hyo-Young

    2017-04-21

    The Arabidopsis splicing factors, AtU2AF65, AtU2AF35, and AtSF1 shuttle between nuclei and cytoplasms. These proteins also move rapidly and continuously in the nuclei, and their movements are affected by ATP depletion. The U2AF65 proteins are splicing factors that interact with SF1 and U2AF35 proteins to promote U2snRNP for the recognition of the pre-mRNA 3\\' splice site during early spliceosome assembly. We have determined the subcellular localization and movement of these proteins\\' Arabidopsis homologs. It was found that Arabidopsis U2AF65 homologs, AtU2AF65a, and AtU2AF65b proteins interact with AtU2AF35a and AtU2AF35b, which are Arabidopsis U2AF35 homologs. We have examined the mobility of these proteins including AtSF1 using fluorescence recovery after photobleaching and fluorescence loss in photobleaching analyses. These proteins displayed dynamic movements in nuclei and their movements were affected by ATP depletion. We have also demonstrated that these proteins shuttle between nuclei and cytoplasms, suggesting that they may also function in cytoplasm. These results indicate that such splicing factors show very similar characteristics to their human counterparts, suggesting evolutionary conservation.

  20. The Arabidopsis splicing factors, AtU2AF65, AtU2AF35, and AtSF1 shuttle between nuclei and cytoplasms

    KAUST Repository

    Park, Hyo-Young; Lee, Keh Chien; Jang, Yun Hee; Kim, SoonKap; Thu, May Phyo; Lee, Jeong Hwan; Kim, Jeong-Kook

    2017-01-01

    The Arabidopsis splicing factors, AtU2AF65, AtU2AF35, and AtSF1 shuttle between nuclei and cytoplasms. These proteins also move rapidly and continuously in the nuclei, and their movements are affected by ATP depletion. The U2AF65 proteins are splicing factors that interact with SF1 and U2AF35 proteins to promote U2snRNP for the recognition of the pre-mRNA 3' splice site during early spliceosome assembly. We have determined the subcellular localization and movement of these proteins' Arabidopsis homologs. It was found that Arabidopsis U2AF65 homologs, AtU2AF65a, and AtU2AF65b proteins interact with AtU2AF35a and AtU2AF35b, which are Arabidopsis U2AF35 homologs. We have examined the mobility of these proteins including AtSF1 using fluorescence recovery after photobleaching and fluorescence loss in photobleaching analyses. These proteins displayed dynamic movements in nuclei and their movements were affected by ATP depletion. We have also demonstrated that these proteins shuttle between nuclei and cytoplasms, suggesting that they may also function in cytoplasm. These results indicate that such splicing factors show very similar characteristics to their human counterparts, suggesting evolutionary conservation.

  1. Preliminary comparison of MP sparking characteristics for SF6 insulating gas mixtures and pure SF6

    International Nuclear Information System (INIS)

    Lindgren, R.; Wegner, H.E.

    1978-01-01

    Operation of the Brookhaven MP-7 tandem Van de Graaff accelerator with pure SF 6 insulating gas is described. Sparking and terminal voltage were monitored and are compared for operation with a mixture of SF 6 , N 2 , CO 2 and O 2 . The accelerator was found to be more difficult to operate with pure SF 6

  2. 14 CFR 31.25 - Factor of safety.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Factor of safety. 31.25 Section 31.25... STANDARDS: MANNED FREE BALLOONS Strength Requirements § 31.25 Factor of safety. (a) Except as specified in paragraphs (b) and (c) of this section, the factor of safety is 1.5. (b) A factor of safety of at least five...

  3. Associations of SF-36 mental health functioning and work and family related factors with intentions to retire early among employees.

    Science.gov (United States)

    Harkonmäki, K; Rahkonen, O; Martikainen, P; Silventoinen, K; Lahelma, E

    2006-08-01

    To examine the associations of mental health functioning (SF-36) and work and family related psychosocial factors with intentions to retire early. Cross sectional survey data (n = 5037) from the Helsinki Health Study occupational cohort in 2001 and 2002 were used. Intentions to retire early were inquired with a question: "Have you considered retiring before normal retirement age?" Mental health functioning was measured by the Short Form 36 (SF-36) mental component summary (MCS). Work and family related psychosocial factors included job demands and job control, procedural and relational justice, conflicts between work and family, and social network size. Multinomial regression models were used to analyse the data. Poor mental health functioning, unfavourable psychosocial working conditions, and conflicts between work and family were individually related to intentions to retire early. After adjustments for all work and family related factors the odds ratio for low mental health functioning was halved (from OR = 6.05 to 3.67), but nevertheless the association between poor mental health functioning and strong intentions to retire early remained strong. These findings highlight not only the importance of low mental health and unfavourable working conditions but also the simultaneous impact of conflicts between work and family to employees' intentions to retire early.

  4. Safety factors for neutron fluences in NPP safety assessment

    International Nuclear Information System (INIS)

    Demekhin, V.L.; Bukanov, V.N.; Il'kovich, V.V.; Pugach, A.M.

    2016-01-01

    In accordance with global practice and a number of existing regulations, the use of conservative approach is required for the calculations related to nuclear safety assessment of NPP. It implies the need to consider the determination of neutron fluence errors that is rather complicated. It is proposed to carry out the consideration by the way of multiplying the neutron fluences obtained with transport calculations by safety factors. The safety factor values are calculated by the developed technique based on the theory of errors, features of the neutron transport calculation code and the results obtained with the code. It is shown that the safety factor value is equal 1.18 with the confidence level of not less than 0.95 for the majority of VVER-1000 reactor places where neutron fluences are determined by MCPV code, and its maximum value is 1.25

  5. 14 CFR 29.303 - Factor of safety.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Factor of safety. 29.303 Section 29.303... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Strength Requirements General § 29.303 Factor of safety. Unless otherwise provided, a factor of safety of 1.5 must be used. This factor applies to external and inertia...

  6. 14 CFR 27.303 - Factor of safety.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Factor of safety. 27.303 Section 27.303... STANDARDS: NORMAL CATEGORY ROTORCRAFT Strength Requirements General § 27.303 Factor of safety. Unless otherwise provided, a factor of safety of 1.5 must be used. This factor applies to external and inertia...

  7. HGF/SF increases number of skin melanocytes but does not alter quality or quantity of follicular melanogenesis.

    Directory of Open Access Journals (Sweden)

    Agnieszka Wolnicka-Glubisz

    Full Text Available Melanins are an important factor determining the vulnerability of mammalian skin to UV radiation and thus to UV-induced skin cancers. Transgenic mice overexpressing hepatocyte growth factor/scatter factor (HGF/SF have extra-follicular dermal melanocytes, notably in the papillary upper dermis, and are susceptible to UV-induced melanoma. Pigmented HGF/SF neonatal mice are more susceptible than albino HGF/SF animals to UVA -induced melanoma, indicating an involvement of melanin in melanoma formation. This raises the question of the effect of transgenic HGF/SF on melanization. We developed a methodology to accurately quantitate both the production of melanin and the efficiency of melanogenesis in normal, and HGF/SF transgenic mice in vivo. Skin and hair shafts of 5 day old and adult (3 week old C57BL/6-HGF/SF and corresponding C57BL/6 wild type mice were investigated by electron paramagnetic resonance spectroscopy (EPR to quantitate melanin, by transmission electron microscopy (TEM for the presence of melanosomes, and by standard histology and by Western blotting and zymography to determine the expression and activity of melanogenesis-related proteins. Eumelanin but no phaeomelanin was detected in transgenic C57BL/6-HGF and C57BL/6 wild type mice. Transgenic HGF/SF overexpression did not change the type of melanin produced in the skin or hair, did not affect the terminal content of melanin production in standard samples of hair and did not influence hair cycle/morphogenesis-related changes in skin thickness. No melanocytes were found in the epidermis and no melanosomes were found in epidermal keratinocytes. HGF/SF transgenic mice thus lack the epidermal melanin UV-protection found in constitutively dark human skin. We conclude that melanocytes in the HGF/SF transgenic mouse, particularly in the papillary dermis, are vulnerable to UVA which interacts with eumelanin but not phaeomelanin to induce melanoma.

  8. Photodegradation of SF6 on polyisoprene surface: Implication on elimination of toxic byproducts

    International Nuclear Information System (INIS)

    Song Xiaoxiao; Liu Xingang; Ye Zhaolian; He Jincong; Zhang Renxi; Hou, Huiqi

    2009-01-01

    Photodegradation of SF 6 was performed on the surface of polyisoprene (PI) based on a brand new mechanism of 'controlled release of radicals'. Effective decomposition of SF 6 (60% of SF 6 was degraded in 4 h) was achieved due to the highly reductive radicals (mainly allylic radicals and excited C=C bond) which were generated from the photolysis of PI. No toxic fluoride was detected by FT-IR. The PI irradiated for 200 h in SF 6 circumstance was examined by XPS to be doped with fluorine and sulfur. Fouling due to photoinitiated polymerization on UV lamp was avoided because the radicals were released slowly. Photolysis of SF 6 in pure argon with the presence of irradiated PI showed kinetics of pseudo-first-order reaction and the degradation rate constant was 5.16 x 10 -5 s -1 . Factors which may affect the photolysis process such as introduction of O 2 and H 2 O were also examined.

  9. 14 CFR 23.303 - Factor of safety.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Factor of safety. 23.303 Section 23.303... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Structure General § 23.303 Factor of safety. Unless otherwise provided, a factor of safety of 1.5 must be used. ...

  10. Factors of influence upon the SF-36-based health related quality of life of patients following surgery for petroclival and lateral posterior surface of pyramid meningiomas.

    Science.gov (United States)

    Pintea, B; Kandenwein, J A; Lorenzen, H; Boström, J P; Daher, F; Velazquez, V; Kristof, R A

    2018-03-01

    To describe the patient's self assessed health related quality of life (saHRQoL) based upon the medical outcome study 36-item short form health survey (SF-36) as well as the factors of influence upon the saHRQoL following surgery for petroclival (PCM) and lateral posterior surface of the pyramid (LPPM) meningiomas. In a series of 78 patients operated consecutively for PCM (n = 46) or LPPM (n = 32) the preoperative, intraoperative and postoperative data were collected retrospectively. The saHRQoL was obtained by mailing the SF-36 questionnaire to the patients. The SF-36 data of the whole patients group was compared with a healthy population. The SF-36 data of the PCM- and LPPM were compared to each other. The influence of pre-, intra- and postoperative findings upon the SF-36 was assessed by uni- and multifactorial analysis. 58 (69%) out of the 78 patients answered the SF-36 questionnaire at a median postoperative follow-up of 59 months. The patients, who answered the SF-36 questionnaire, had a significant lower perioperative complication rate than those who did not (46% vs. 75%, p = 0.019). The saHRQoL of the LPPM and PCM was reduced on several sub-scales, when compared to the German reference population. The outcome of PCM is, assessed by saHRQoL as well as by conventional neurosurgical grading scales, inferior to that of LPPM. The saHRQoL of LPPM correlated in the uni- and multivariate analysis with the early postoperative KPI on the sub-scales SF1 (physical functioning) and SF5 (vitality). Accordingly, the sub-scale SF2 (role-physical) of PCM correlated with the change of the KPI from preoperative to the last follow up. The saHRQoL of the evaluable patients was lower than that of the normal population. The saHRQoL score of PCM-patients was lower than that of LPPM-patients. For the future the saHRQol should be assessed routinely; It reflects the patients' perspective upon postoperative outcome and enables the comparison with other treatment modalities

  11. Partial Safety Factors for Rubble Mound Breakwaters

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Burcharth, H. F.; Christiani, E.

    1995-01-01

    On the basis of the failure modes formulated in the various subtasks calibration of partial safety factors are described in this paper. The partial safety factors can be used to design breakwaters under quite different design conditions, namely probabilities of failure from 0.01 to 0.4, design...... lifetimes from 20 to 100 years and different qualities of wave data. A code of practice where safety is taken into account using partial safety factors is called a level I code. The partial safety factors are calibrated using First Order Reliability Methods (FORM, see Madsen et al. [1]) where...... in section 3. First Order Reliability Methods are described in section 4, and in section 5 it is shown how partial safety factors can be introduced and calibrated. The format of a code for design and analysis of rubble mound breakwaters is discussed in section 6. The mathematical formulation of the limit...

  12. Decomposition of Potent Greenhouse Gases SF6, CF4 and SF5CF3 by Dielectric Barrier Discharge

    International Nuclear Information System (INIS)

    Zhang Renxi; Wang Jingting; Cao Xu; Hou Huiqi

    2016-01-01

    For their distinguished global warming potential (GWP100) and long atmosphere lifespan, CF 4 , SF 6 and SF 5 CF 3 were significant in the field of greenhouse gas research. The details of discharging character and the optimal parameter were discussed by using a Dielectric Barrier Discharge (DBD) reactor to decompose these potent greenhouse gases in this work. The results showed that SF 6 could be decomposed by 92% under the conditions of 5 min resident time and 3000 V applied voltage with the partial pressure of 2.0 kPa, 28.2 kPa, and 1.8 kPa for SF 6 , air and water vapor, respectively. 0.4 kPa CF 4 could be decomposed by 98.2% for 4 min resident time with 30 kPa Ar added. The decomposition of SF 5 CF 3 was much more effective than that of SF 6 and CF 4 and moreover, 1.3 kPa SF 5 CF 3 , discharged with 30 kPa O 2 , Ar and air, could not be detected when the resident time was 80 s, 40 s, and 120 s, respectively. All the results indicated that DBD was a feasible technique for the abatement of potent greenhouse gases. (paper)

  13. 14 CFR 25.303 - Factor of safety.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Factor of safety. 25.303 Section 25.303... STANDARDS: TRANSPORT CATEGORY AIRPLANES Structure General § 25.303 Factor of safety. Unless otherwise specified, a factor of safety of 1.5 must be applied to the prescribed limit load which are considered...

  14. Electron Transport Coefficients and Effective Ionization Coefficients in SF6-O2 and SF6-Air Mixtures Using Boltzmann Analysis

    Science.gov (United States)

    Wei, Linsheng; Xu, Min; Yuan, Dingkun; Zhang, Yafang; Hu, Zhaoji; Tan, Zhihong

    2014-10-01

    The electron drift velocity, electron energy distribution function (EEDF), density-normalized effective ionization coefficient and density-normalized longitudinal diffusion velocity are calculated in SF6-O2 and SF6-Air mixtures. The experimental results from a pulsed Townsend discharge are plotted for comparison with the numerical results. The reduced field strength varies from 40 Td to 500 Td (1 Townsend=10-17 V·cm2) and the SF6 concentration ranges from 10% to 100%. A Boltzmann equation associated with the two-term spherical harmonic expansion approximation is utilized to gain the swarm parameters in steady-state Townsend. Results show that the accuracy of the Boltzmann solution with a two-term expansion in calculating the electron drift velocity, electron energy distribution function, and density-normalized effective ionization coefficient is acceptable. The effective ionization coefficient presents a distinct relationship with the SF6 content in the mixtures. Moreover, the E/Ncr values in SF6-Air mixtures are higher than those in SF6-O2 mixtures and the calculated value E/Ncr in SF6-O2 and SF6-Air mixtures is lower than the measured value in SF6-N2. Parametric studies conducted on these parameters using the Boltzmann analysis offer substantial insight into the plasma physics, as well as a basis to explore the ozone generation process.

  15. A hierarchical factor analysis of a safety culture survey.

    Science.gov (United States)

    Frazier, Christopher B; Ludwig, Timothy D; Whitaker, Brian; Roberts, D Steve

    2013-06-01

    Recent reviews of safety culture measures have revealed a host of potential factors that could make up a safety culture (Flin, Mearns, O'Connor, & Bryden, 2000; Guldenmund, 2000). However, there is still little consensus regarding what the core factors of safety culture are. The purpose of the current research was to determine the core factors, as well as the structure of those factors that make up a safety culture, and establish which factors add meaningful value by factor analyzing a widely used safety culture survey. A 92-item survey was constructed by subject matter experts and was administered to 25,574 workers across five multi-national organizations in five different industries. Exploratory and hierarchical confirmatory factor analyses were conducted revealing four second-order factors of a Safety Culture consisting of Management Concern, Personal Responsibility for Safety, Peer Support for Safety, and Safety Management Systems. Additionally, a total of 12 first-order factors were found: three on Management Concern, three on Personal Responsibility, two on Peer Support, and four on Safety Management Systems. The resulting safety culture model addresses gaps in the literature by indentifying the core constructs which make up a safety culture. This clarification of the major factors emerging in the measurement of safety cultures should impact the industry through a more accurate description, measurement, and tracking of safety cultures to reduce loss due to injury. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

  16. EPA's SF6 Emission Reduction Partnership: Maximizing the Benefits of SF6 Emission Reductions for Electric Utilities

    National Research Council Canada - National Science Library

    Blackman, Jerome; Kantamaneni, Ravi

    2004-01-01

    .... Under ideal conditions, SF6 would remain contained within transmission equipment. In reality, however, SF6 is inadvertently emitted into the atmosphere as leaks develop during various stages of the equipment's life cycle...

  17. Intracellular distribution of TM4SF1 and internalization of TM4SF1-antibody complex in vascular endothelial cells

    International Nuclear Information System (INIS)

    Sciuto, Tracey E.; Merley, Anne; Lin, Chi-Iou; Richardson, Douglas; Liu, Yu; Li, Dan; Dvorak, Ann M.; Dvorak, Harold F.; Jaminet, Shou-Ching S.

    2015-01-01

    Transmembrane-4 L-six family member-1 (TM4SF1) is a small plasma membrane-associated glycoprotein that is highly and selectively expressed on the plasma membranes of tumor cells, cultured endothelial cells, and, in vivo, on tumor-associated endothelium. Immunofluorescence microscopy also demonstrated TM4SF1 in cytoplasm and, tentatively, within nuclei. With monoclonal antibody 8G4, and the finer resolution afforded by immuno-nanogold transmission electron microscopy, we now demonstrate TM4SF1 in uncoated cytoplasmic vesicles, nuclear pores and nucleoplasm. Because of its prominent surface location on tumor cells and tumor-associated endothelium, TM4SF1 has potential as a dual therapeutic target using an antibody drug conjugate (ADC) approach. For ADC to be successful, antibodies reacting with cell surface antigens must be internalized for delivery of associated toxins to intracellular targets. We now report that 8G4 is efficiently taken up into cultured endothelial cells by uncoated vesicles in a dynamin-dependent, clathrin-independent manner. It is then transported along microtubules through the cytoplasm and passes through nuclear pores into the nucleus. These findings validate TM4SF1 as an attractive candidate for cancer therapy with antibody-bound toxins that have the capacity to react with either cytoplasmic or nuclear targets in tumor cells or tumor-associated vascular endothelium. - Highlights: • Anti-TM4SF1 antibody 8G4 was efficiently taken up by cultured endothelial cells. • TM4SF1–8G4 internalization is dynamin-dependent but clathrin-independent. • TM4SF1–8G4 complexes internalize along microtubules to reach the perinuclear region. • Internalized TM4SF1–8G4 complexes pass through nuclear pores into the nucleus. • TM4SF1 is an attractive candidate for ADC cancer therapy

  18. Intracellular distribution of TM4SF1 and internalization of TM4SF1-antibody complex in vascular endothelial cells

    Energy Technology Data Exchange (ETDEWEB)

    Sciuto, Tracey E.; Merley, Anne; Lin, Chi-Iou [Center for Vascular Biology Research and Department of Pathology, Beth Israel Deaconess Medical Center and Harvard Medical School (United States); Richardson, Douglas [Department of Molecular and Cellular Biology, Harvard University (United States); Liu, Yu [Department of Pharmacology, Shanxi Medical University, Xinjiannanlu 56, Shanxi Province, Taiyuan 030001 (China); Li, Dan; Dvorak, Ann M. [Center for Vascular Biology Research and Department of Pathology, Beth Israel Deaconess Medical Center and Harvard Medical School (United States); Dvorak, Harold F., E-mail: hdvorak@bidmc.harvard.edu [Center for Vascular Biology Research and Department of Pathology, Beth Israel Deaconess Medical Center and Harvard Medical School (United States); Jaminet, Shou-Ching S., E-mail: sjaminet@bidmc.harvard.edu [Center for Vascular Biology Research and Department of Pathology, Beth Israel Deaconess Medical Center and Harvard Medical School (United States)

    2015-09-25

    Transmembrane-4 L-six family member-1 (TM4SF1) is a small plasma membrane-associated glycoprotein that is highly and selectively expressed on the plasma membranes of tumor cells, cultured endothelial cells, and, in vivo, on tumor-associated endothelium. Immunofluorescence microscopy also demonstrated TM4SF1 in cytoplasm and, tentatively, within nuclei. With monoclonal antibody 8G4, and the finer resolution afforded by immuno-nanogold transmission electron microscopy, we now demonstrate TM4SF1 in uncoated cytoplasmic vesicles, nuclear pores and nucleoplasm. Because of its prominent surface location on tumor cells and tumor-associated endothelium, TM4SF1 has potential as a dual therapeutic target using an antibody drug conjugate (ADC) approach. For ADC to be successful, antibodies reacting with cell surface antigens must be internalized for delivery of associated toxins to intracellular targets. We now report that 8G4 is efficiently taken up into cultured endothelial cells by uncoated vesicles in a dynamin-dependent, clathrin-independent manner. It is then transported along microtubules through the cytoplasm and passes through nuclear pores into the nucleus. These findings validate TM4SF1 as an attractive candidate for cancer therapy with antibody-bound toxins that have the capacity to react with either cytoplasmic or nuclear targets in tumor cells or tumor-associated vascular endothelium. - Highlights: • Anti-TM4SF1 antibody 8G4 was efficiently taken up by cultured endothelial cells. • TM4SF1–8G4 internalization is dynamin-dependent but clathrin-independent. • TM4SF1–8G4 complexes internalize along microtubules to reach the perinuclear region. • Internalized TM4SF1–8G4 complexes pass through nuclear pores into the nucleus. • TM4SF1 is an attractive candidate for ADC cancer therapy.

  19. Leak detection of SF6 gas pressure vessel safety devices at BARC-TIFR Pelletron accelerator

    International Nuclear Information System (INIS)

    Ninawe, N.G.; Sharma, S.C.; Nair, J.P.; Sparrow, H.; Bolar, P.C.; Gudekar, P.V.; Mahapatra, S.; Vishwakarma, R.S.; Ramjilal; Matkar, U.V.; Gore, J.A.; Gupta, A.K.

    2015-01-01

    Pelletron accelerator is in operation since last more than 26 years. To achieve desired voltage gradient SF6 gas of about 20 tons is used to have 75-80 psig pressure in main accelerator tank. During accelerator tank maintenance gas is transferred to four storage tanks, kept in open space in the vicinity of sea. Recently refurbishment and retrofitting of four storage tanks was carried out which includes the installation of new drift space, rupture disc assembly, relief valves and manual valves along with civil and painting work. All components to be installed were tested for high pressure. Helium gas sniffer technique was used to check micro leaks for new joints for all components before installing for storage tanks. Subsequently, the tanks were tested up to 90 psig SF6 gradually in succession. No pressure drop was observed in storage tanks. This work was carried out as per recommendation of the then particle accelerator committee (PASC). (author)

  20. Safety of Nuclear Power Plants: Design. Specific Safety Requirements

    International Nuclear Information System (INIS)

    2012-01-01

    On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

  1. An approach for Periodic Safety Review (PSR) of units 5 and 6 of Kozloduy NPP

    International Nuclear Information System (INIS)

    Kichev, Emil

    2014-01-01

    Periodic Safety Reviews (PSR) is complementary to the routine and special safety reviews and does not replaced them. It determines the level of compliance with current safety requirements and covers all safety aspects of NPP operation and all equipment (SSCs) on site. Three levels of importance are defined for the documents in PSR (towards higher conservatism): Bulgarian documents; IAEA documents; Documents of manufactures and suppliers of the equipment (SSCs). The scope and activities consists of four stages and includes 14 safety factors (SF). Cooperation with external companies and organizations in areas with proved experience is used.

  2. 48 CFR 53.232 - Contract financing (SF 1443).

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Contract financing (SF 1443). 53.232 Section 53.232 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION (CONTINUED) CLAUSES AND FORMS FORMS Prescription of Forms 53.232 Contract financing (SF 1443). SF 1443 (JUL...

  3. Quality of Life in rural and urban populations in Lebanon using SF-36 Health Survey

    Directory of Open Access Journals (Sweden)

    Retel-Rude Nathalie

    2003-08-01

    Full Text Available Abstract Background Measuring health status in a population is important for the evaluation of interventions and the prediction of health and social care needs. Quality of life (QoL studies are an essential complement to medical evaluation but most of the tools available in this area are in English. In order to evaluated QoL in rural and urban areas in Lebanon, the short form 36 health survey (SF-36 was adapted into Arabic. Methods SF-36 was administered in a cross-sectional study, to collect sociodemographic and environmental variables as well as self reported morbidity. We analysed a representative sample containing 1632 subjects, from whom we randomly picked 524 subjects aged 14 years and over. The translation, cultural adaptation and validation of the SF-36 followed the International Quality of Life Assessment methodology. Multivariate analysis (generalized linear model was performed to test the effect of habitat (rural on urban areas on all domains of the SF-36. Results The rate of missing data is very low (0.23% of items. Item level validation supported the assumptions underlying Likert scoring. SF-36 scale scores showed wide variability and acceptable internal consistency (Cronbach's alpha >0.70, factor analysis yielded patterns of factor correlation comparable to that found in the U.S.A and France. Patients resident in rural areas had higher vitality scores than those in urban areas. Older people reported more satisfaction with some domains of life than younger people, except for physical functioning. The QoL of women is poorer than men; certain symptoms and morbidity independently influence the domains of SF-36 in this population. Conclusion The results support the validity of the SF-36 Arabic version. Habitat has a minor influence on QoL, women had a poor QoL, and health problems had differential impact on QoL.

  4. Quality of Life in rural and urban populations in Lebanon using SF-36 Health Survey

    Science.gov (United States)

    Sabbah, Ibtissam; Drouby, Nabil; Sabbah, Sanaa; Retel-Rude, Nathalie; Mercier, Mariette

    2003-01-01

    Background Measuring health status in a population is important for the evaluation of interventions and the prediction of health and social care needs. Quality of life (QoL) studies are an essential complement to medical evaluation but most of the tools available in this area are in English. In order to evaluated QoL in rural and urban areas in Lebanon, the short form 36 health survey (SF-36) was adapted into Arabic. Methods SF-36 was administered in a cross-sectional study, to collect sociodemographic and environmental variables as well as self reported morbidity. We analysed a representative sample containing 1632 subjects, from whom we randomly picked 524 subjects aged 14 years and over. The translation, cultural adaptation and validation of the SF-36 followed the International Quality of Life Assessment methodology. Multivariate analysis (generalized linear model) was performed to test the effect of habitat (rural on urban areas) on all domains of the SF-36. Results The rate of missing data is very low (0.23% of items). Item level validation supported the assumptions underlying Likert scoring. SF-36 scale scores showed wide variability and acceptable internal consistency (Cronbach's alpha >0.70), factor analysis yielded patterns of factor correlation comparable to that found in the U.S.A and France. Patients resident in rural areas had higher vitality scores than those in urban areas. Older people reported more satisfaction with some domains of life than younger people, except for physical functioning. The QoL of women is poorer than men; certain symptoms and morbidity independently influence the domains of SF-36 in this population. Conclusion The results support the validity of the SF-36 Arabic version. Habitat has a minor influence on QoL, women had a poor QoL, and health problems had differential impact on QoL. PMID:12952543

  5. FOXL2 Is an Essential Activator of SF-1-Induced Transcriptional Regulation of Anti-Müllerian Hormone in Human Granulosa Cells.

    Directory of Open Access Journals (Sweden)

    Hanyong Jin

    Full Text Available Anti-Müllerian hormone (AMH is required for proper sexual differentiation by regulating the regression of the Müllerian ducts in males. Recent studies indicate that AMH could be an important factor for maintaining the ovarian reserve. However, the mechanisms of AMH regulation in the ovary are largely unknown. Here, we provide evidence that AMH is an ovarian target gene of steroidogenic factor-1 (SF-1, an orphan nuclear receptor required for proper follicle development. FOXL2 is an evolutionally conserved transcription factor, and its mutations cause blepharophimosis, ptosis, and epicanthus inversus syndrome (BPES, wherein affected females display eyelid defects and premature ovarian failure (POF. Notably, we found that functional FOXL2 is essential for SF-1-induced AMH regulation, via protein-protein interactions between FOXL2 and SF-1. A BPES-inducing mutant of FOXL2 (290-291delCA was unable to interact with SF-1 and failed to mediate the association between SF-1 and the AMH promoter. Therefore, this study identified a novel regulatory circuit for ovarian AMH production; specifically, through the coordinated interplay between FOXL2 and SF-1 that could control ovarian follicle development.

  6. Organizational factors in nuclear safety

    International Nuclear Information System (INIS)

    Wilpert, Bernhard

    2000-01-01

    The overall picture of factors which contributed to the event presents a panorama of a NPP where organizational and managerial characteristics were intricately intertwined and emerged as crucial for a general deterioration of the plant's capabilities to continually correct its deficiencies and optimize its operations. In the following author shall attempt to first cover various important efforts to modeling organizational factors relevant to safety. The second part of my presentation will offer an attempt towards an integrative model. The third part concludes with an agenda for research and practice. Most of the twelve different approaches above attempt to consider safety relevant organizational factors by way of pragmatic classifications. Together with their sub-categories we can count close to 160 different factors on various levels of abstraction. This is tantamount to say that most approaches lack systematic theoretical underpinnings. Thus then arises the question whether we need to develop a generic model, which promises to encompass these three major approaches altogether. Practical issues emerge particularly in the domain of organizational development, i.e. the goal oriented efforts to change the structures and the functioning of nuclear operations in such a way that the desired outputs in terms safety and reliability result in a sustained fashion. Again, these practical concerns are intimately related to developments and advances in theory and methodology. Only a close cooperation among scientists from various disciplines and of practitioners holds the promise of adequately understanding and use of organizational factors in future improving the safety record of nuclear industry worldwide. (S.Y.)

  7. Leptin and insulin engage specific PI3K subunits in hypothalamic SF1 neurons

    Directory of Open Access Journals (Sweden)

    Jong-Woo Sohn

    2016-08-01

    Full Text Available Objective: The ventromedial hypothalamic nucleus (VMH regulates energy balance and glucose homeostasis. Leptin and insulin exert metabolic effects via their cognate receptors expressed by the steroidogenic factor 1 (SF1 neurons within the VMH. However, detailed cellular mechanisms involved in the regulation of these neurons by leptin and insulin remain to be identified. Methods: We utilized genetically-modified mouse models and performed patch-clamp electrophysiology experiments to resolve this issue. Results: We identified distinct populations of leptin-activated and leptin-inhibited SF1 neurons. In contrast, insulin uniformly inhibited SF1 neurons. Notably, we found that leptin-activated, leptin-inhibited, and insulin-inhibited SF1 neurons are distinct subpopulations within the VMH. Leptin depolarization of SF1 neuron also required the PI3K p110β catalytic subunit. This effect was mediated by the putative transient receptor potential C (TRPC channel. On the other hand, hyperpolarizing responses of SF1 neurons by leptin and insulin required either of the p110α or p110β catalytic subunits, and were mediated by the putative ATP-sensitive K+ (KATP channel. Conclusions: Our results demonstrate that specific PI3K catalytic subunits are responsible for the acute effects of leptin and insulin on VMH SF1 neurons, and provide insights into the cellular mechanisms of leptin and insulin action on VMH SF1 neurons that regulate energy balance and glucose homeostasis. Author Video: Author Video Watch what authors say about their articles Keywords: Cellular mechanism, Conditional knockout mouse, Patch clamp technique, Functional heterogeneity, Homeostasis

  8. Human factors in nuclear safety oversight

    International Nuclear Information System (INIS)

    Taylor, K.

    1989-01-01

    The mission of the nuclear safety oversight function at the Savannah River Plant is to enhance the process and nuclear safety of site facilities. One of the major goals surrounding this mission is the reduction of human error. It is for this reason that several human factors engineers are assigned to the Operations assessment Group of the Facility Safety Evaluation Section (FSES). The initial task of the human factors contingent was the design and implementation of a site wide root cause analysis program. The intent of this system is to determine the most prevalent sources of human error in facility operations and to assist in determining where the limited human factors resources should be focused. In this paper the strategy used to educate the organization about the field of human factors is described. Creating an awareness of the importance of human factors engineering in all facets of design, operation, and maintenance is considered to be an important step in reducing the rate of human error

  9. A Comparison of SF-36 and SF-12 Composite Scores and Subsequent Hospitalization and Mortality Risks in Long-Term Dialysis Patients

    Science.gov (United States)

    Xu, Jianglin; Lin, Shu-Fang; Dean, Sandie Guerra; Lazarus, J. Michael; Hakim, Raymond M.

    2010-01-01

    Background and objectives: The Short Form 12 (SF-12) has not been validated for long-term dialysis patients. The study compared physical and mental component summary (PCS/MCS) scores from the SF-36 with those from the embedded SF-12 in a national cohort of dialysis patients. Design, setting, participants, & measurements: All 44,395 patients who had scorable SF-36 and SF-12 from January 1, 2006, to December 31, 2006, and were treated at Fresenius Medical Care, North America facilities were included. Death and first hospitalization were followed for up to 1 year from the date of survey. Correlation and agreement were obtained between PCS-36 and PCS-12 and MCS-36 and MCS-12; then Cox models were constructed to compare associated hazard ratios (HRs) between them. Results: Physical and mental dimensions both exhibited excellent intraclass correlation coefficients of 0.94. Each incremental point for both PCS-12 and PCS-36 was associated with a 2.4% lower adjusted HR of death and 0.4% decline in HR for first hospitalization (both P < 0.0001). Corresponding improvement in HR of death for each MCS point was 1.2% for MCS-12 and 1.3% for MCS-36, whereas both had similar 0.6% lower HR for hospitalization per point (all P < 0.0001). Conclusions: The use of the SF-12 alone or as part of a larger survey is valid in dialysis patients. Composite scores from the SF-12 and SF-36 have similar prognostic association with death and hospitalization risk. Prospective longitudinal studies of SF-12 surveys that consider responsiveness to specific clinical, situational, and interventional changes are needed in this population. PMID:20019120

  10. Measuring quality of life in patients with stress urinary incontinence: is the ICIQ-UI-SF adequate?

    Science.gov (United States)

    Kurzawa, Zuzanna; Sutherland, Jason M; Crump, Trafford; Liu, Guiping

    2018-05-08

    The International Consultation on Incontinence Questionnaire Short Form (ICIQ-UI-SF) is a widely used four-item patient-reported outcome (PRO) measure. Evaluations of this instrument are limited, restraining user's confidence in the instrument. This study conducts a comprehensive evaluation of the ICIQ-UI-SF on a sample of urological surgery patients in Canada. One hundred and seventy-seven surgical patients with stress urinary incontinence completed the ICIQ-UI-SF pre-operatively. Methods drawing from confirmatory factor analysis (CFA), measures of reliability, item response theory (IRT), and differential item functioning were applied. Ceiling effects were examined. Ceiling effects were identified. In the CFA, the factor loadings of items one and two differed significantly (p McDonald's coefficient (0.65). The IRT found the instrument does not discriminate between individuals with low incontinence-related quality of life. Due to low/moderate reliability, the ICIQ-UI-SF can be used as a complement to other data or used to report aggregated surgical outcomes among surgical patients. If the primary objective is to measure quality of life, other PROs should be considered.

  11. Safety of Nuclear Power Plants: Design. Specific Safety Requirements (Chinese Ed.)

    International Nuclear Information System (INIS)

    2012-01-01

    On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

  12. Safety of Nuclear Power Plants: Design. Specific Safety Requirements (French Ed.)

    International Nuclear Information System (INIS)

    2012-01-01

    On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

  13. Safety of Nuclear Power Plants: Design. Specific Safety Requirements (Arabic Ed.)

    International Nuclear Information System (INIS)

    2012-01-01

    On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

  14. Parametric investigation on the effect of nitrogen to reduce SF6 content in spark gap

    Science.gov (United States)

    Raj, Avinash; Khaidir, Nur; Ishak, Sanuri; Ghani, Basri Abdul; Chakrabarty, Chandan; Permal, Navitharshaani; Ahmad, Harizan

    2017-03-01

    Almost all the MV and HV switchgears used by power utilities for interrupting faults are Sulphur Hexaflouride SF6 gas circuit breakers as this gas has the best dielectric properties to quench the onset of an arc in the event of fault. However due to strong dissociating properties of this gas when in contact with air that can release fluorine into the atmosphere, the Kyoto protocol has mandated to reduce the usage of SF6 in the future. SF6 is a greenhouse gas and it's about 3000 more severe than CO2. And that's the reason for replacing this gas. A close match in the quenching properties to SF6 that is now being intensively researched is nitrogen N2. This gas is considered to be an inert gas, and its release into the atmosphere has no harmful effects (except for asphyxiation - which can be easily handled with awareness). As the need for a replacement of SF6 becomes critical in the near future, the urgency to find the right gas is immediate. Hence the proposed work in this paper is to make a comprehensive parametric investigation of N2 gas in vacuum spark-gap. The spark-gap is chosen due to flexibility in changing the gap distance and easily be housed in vacuum. The parameters to be investigated are pure N2 and N2/ SF6 mix. The settling-time of the electrical break-down voltage and current are measured using voltage probe and Pearson probe. This time is paramount as it determines the speed of breaking the circuit. A faster breaking time ensures the safety of other HV equipment in the circuit. A comparative study between the various parameters will be conducted to obtain the best recipe (gas mix and gap distance) that gives the shortest settling time the breakdown using N2/ SF6/Mixture gas was successfully conducted and a Paschen curve has been established.

  15. POD-1/Tcf21 overexpression reduces endogenous SF-1 and StAR expression in rat adrenal cells

    Directory of Open Access Journals (Sweden)

    M. M. França

    2015-12-01

    Full Text Available During gonad and adrenal development, the POD-1/capsulin/TCF21transcription factor negatively regulates SF-1/NR5A1expression, with higher SF-1 levels being associated with increased adrenal cell proliferation and tumorigenesis. In adrenocortical tumor cells, POD-1 binds to the SF-1 E-box promoter region, decreasing SF-1 expression. However, the modulation of SF-1 expression by POD-1 has not previously been described in normal adrenal cells. Here, we analyzed the basal expression of Pod-1 and Sf-1 in primary cultures of glomerulosa (G and fasciculata/reticularis (F/R cells isolated from male Sprague-Dawley rats, and investigated whether POD-1 overexpression modulates the expression of endogenous Sf-1 and its target genes in these cells. POD-1 overexpression, following the transfection of pCMVMycPod-1, significantly decreased the endogenous levels of Sf-1 mRNA and protein in F/R cells, but not in G cells, and also decreased the expression of the SF-1 target StAR in F/R cells. In G cells overexpressing POD-1, no modulation of the expression of SF-1 targets, StAR and CYP11B2, was observed. Our data showing that G and F/R cells respond differently to ectopic POD-1 expression emphasize the functional differences between the outer and inner zones of the adrenal cortex, and support the hypothesis that SF-1 is regulated by POD-1/Tcf21 in normal adrenocortical cells lacking the alterations in cellular physiology found in tumor cells.

  16. A novel method to decompose two potent greenhouse gases: Photoreduction of SF6 and SF5CF3 in the presence of propene

    International Nuclear Information System (INIS)

    Huang Li; Shen Yan; Dong Wenbo; Zhang Renxi; Zhang Jianliang; Hou Huiqi

    2008-01-01

    SF 5 CF 3 and SF 6 are the most effective greenhouse gases on a per molecule basis in the atmosphere. Original laboratory trial for photoreduction of them by use of propene as a reactant was performed to develop a novel technique to destroy them. The highly reductive radicals produced during the photolysis of propene at 184.9 nm, such as ·CH 3 , ·C 2 H 3 , and ·C 3 H 5 , could efficiently decompose SF 6 and SF 5 CF 3 to CH 4 , elemental sulfur and trace amounts of fluorinated organic compounds. It was further demonstrated that the destruction and removal efficiency (DRE) of SF 5 X (X represented F or CF 3 ) was highly dependent on the initial propene-to-SF 5 X ratio. The addition of certain amounts of oxygen and water vapor not only enhanced the DRE but avoided the generation of deposits. In both systems, employment nitrogen as dilution gas lessened the DRE slightly. Given the advantage of less toxic products, the technique might contribute to SF 5 X remediation

  17. Organizational factors influencing improvements in safety

    International Nuclear Information System (INIS)

    Marcus, A.; Nichols, M.L.; Olson, J.; Osborn, R.; Thurber, J.

    1992-01-01

    Research reported here seeks to identify the key organizational factors that influence safety-related performance indicators in nuclear power plants over time. It builds upon organizational factors identified in NUREG/CR-5437, and begins to develop a theory of safety-related performance and performance improvement based on economic and behavioral theories of the firm. Central to the theory are concepts of past performance, problem recognition, resource availability, resource allocation, and business strategies that focus attention. Variables which reflect those concepts are combined in statistical models and tested for their ability to explain scrams, safety system actuations, significant events, safety system failures, radiation exposure, and critical hours. Results show the performance indicators differ with respect to the sets of variables which serve as the best predictors of future performance, and past performance is the most consistent predictor of future performance

  18. Safety aspects of dry spent fuel storage and spent fuel management

    International Nuclear Information System (INIS)

    Botsch, W.; Smalian, S.; Hinterding, P.; Voelzke, H.; Wolff, D.; Kasparek, E.

    2014-01-01

    The storage of spent nuclear fuel (SF) and high-level radioactive waste (HLW) must conform to safety requirements. Safety aspects like safe enclosure of radioactive materials, safe removal of decay heat, nuclear criticality safety and avoidance of unnecessary radiation exposure must be achieved throughout the storage period. The implementation of these safety requirements can be achieved by dry storage of SF and HLW in casks as well as in other systems such as dry vault storage systems or spent fuel pools, where the latter is neither a dry nor a passive system. In Germany dual purpose casks for SF or HLW are used for safe transportation and interim storage. TUV and BAM, who work as independent experts for the competent authorities, present the storage licensing process including sites and casks and inform about spent nuclear fuel management and issues concerning dry storage of spent nuclear fuel, based on their long experience in these fields (authors)

  19. The sf32 unique gene of Spodoptera frugiperda multiple nucleopolyhedrovirus (SfMNPV is a non-essential gene that could be involved in nucleocapsid organization in occlusion-derived virions.

    Directory of Open Access Journals (Sweden)

    Inés Beperet

    Full Text Available A recombinant virus lacking the sf32 gene (Sf32null, unique to the Spodoptera frugiperda multiple nucleopolyhedrovirus (SfMNPV, was generated by homologous recombination from a bacmid comprising the complete viral genome (Sfbac. Transcriptional analysis revealed that sf32 is an early gene. Occlusion bodies (OBs of Sf32null contained 62% more genomic DNA than viruses containing the sf32 gene, Sfbac and Sf32null-repair, although Sf32null DNA was three-fold less infective when injected in vivo. Sf32null OBs were 18% larger in diameter and contained 17% more nucleocapsids within ODVs than those of Sfbac. No significant differences were detected in OB pathogenicity (50% lethal concentration, speed-of-kill or budded virus production in vivo. In contrast, the production of OBs/larva was reduced by 39% in insects infected by Sf32null compared to those infected by Sfbac. The SF32 predicted protein sequence showed homology (25% identity, 44% similarity to two adhesion proteins from Streptococcus pyogenes and a single N-mirystoylation site was predicted. We conclude that SF32 is a non-essential protein that could be involved in nucleocapsid organization during ODV assembly and occlusion, resulting in increased numbers of nucleocapsids within ODVs.

  20. Development of a Short Form of the Five-Factor Narcissism Inventory: the FFNI-SF.

    Science.gov (United States)

    Sherman, Emily D; Miller, Joshua D; Few, Lauren R; Campbell, W Keith; Widiger, Thomas A; Crego, Cristina; Lynam, Donald R

    2015-09-01

    The Five-Factor Narcissism Inventory (FFNI; Glover, Miller, Lynam, Crego, & Widiger, 2012) is a 148-item self-report inventory of 15 traits designed to assess the basic elements of narcissism from the perspective of a 5-factor model. The FFNI assesses both vulnerable (i.e., cynicism/distrust, need for admiration, reactive anger, and shame) and grandiose (i.e., acclaim seeking, arrogance, authoritativeness, entitlement, exhibitionism, exploitativeness, grandiose fantasies, indifference, lack of empathy, manipulativeness, and thrill seeking) variants of narcissism. The present study reports the development of a short-form version of the FFNI in 4 diverse samples (i.e., 2 undergraduate samples, a sample recruited from MTurk, and a clinical community sample) using item response theory. The validity of the resultant 60-item short form was compared against the validity of the full scale in the 4 samples at both the subscale level and the level of the grandiose and vulnerable composites. Results indicated that the 15 subscales remain relatively reliable, possess a factor structure identical to the structure of the long-form scales, and manifest correlational profiles highly similar to those of the long-form scales in relation to a variety of criterion measures, including basic personality dimensions, other measures of grandiose and vulnerable narcissism, and indicators of externalizing and internalizing psychopathology. Grandiose and vulnerable composites also behave almost identically across the short- and long-form versions. It is concluded that the FFNI-Short Form (FFNI-SF) offers a well-articulated assessment of the basic traits comprising grandiose and vulnerable narcissism, particularly when assessment time is limited. (c) 2015 APA, all rights reserved.

  1. Measuring health-related quality of life: psychometric evaluation of the Tunisian version of the SF-12 health survey.

    Science.gov (United States)

    Younsi, Moheddine; Chakroun, Mohamed

    2014-09-01

    The 12-item short-form health survey (SF-12) was developed as a shorter alternative to the SF-36 for use in large-scale studies as an applicable instrument for measuring health-related quality of life. The main purpose of this study was to evaluate the psychometric properties of the Tunisian version of the SF-12. A stratified representative sample (N = 3,582) of the general Tunisian population aged 18 years and over was interviewed. SF-12 summary scores were derived using the standard US algorithm. Factor analysis was used to confirm the hypothesized component structure of the SF-12 items. Reliability was estimated using internal consistency, and construct validity was investigated with "known groups" validity testing and via convergent and divergent validity. SF-12 summary scores distinguished well, and in the expected manner, between groups of respondents on the basis of gender, age, education and socioeconomic status, thus providing evidence of construct validity. Mean scores in the total sample were 50.11 (SD 8.53) for the physical component summary (PCS) score and 47.96 (SD 9.82) for the mental component summary (MCS) score. The results showed satisfactory internal consistency and acceptable convergent validity for both summary scores. Cronbach's α coefficient for PCS-12 and MCS-12 was 0.73 and 0.72, respectively. Known groups comparison showed that the SF-12 discriminated well between groups of respondents on the basis of gender, age, education and socioeconomic status. In addition, no floor or ceiling effects at baseline were observed. The PCA confirmed the two-factor structure of the SF-12 items. Items belonging to the physical component correlated more strongly with the PCS-12 than those with the MCS-12. Similarly, items belonging to the mental component correlated more strongly with the MCS-12 than those with the PCS-12. The findings suggest that the SF-12 appears to be a valid and reliable measure that can be used for measuring of population health

  2. Reliability and validity of 12-item Short-Form health survey (SF-12) for the health status of Chinese community elderly population in Xujiahui district of Shanghai.

    Science.gov (United States)

    Shou, Juan; Ren, Limin; Wang, Haitang; Yan, Fei; Cao, Xiaoyun; Wang, Hui; Wang, Zhiliang; Zhu, Shanzhu; Liu, Yao

    2016-04-01

    The 12-item Short-Form Health Survey (SF-12) is the abridged practical version of SF-36. This cross-sectional study was aimed to assess the reliability and validity of SF-12 for the health status of Chinese community elderly population. The Chinese community elderly people in Xujiahui district of Shanghai were investigated. The internal consistency reliability was assessed using Cronbach's alpha and split-half reliability coefficients. Construct validity was analyzed using exploratory factor analysis (EFA) and confirmatory factor analysis (CFA). Spearman's correlation coefficient (ρ) was used for the evaluation of criterion, convergent, and discriminant validity with Spearman's ρ ≥ 0.4 as satisfactory. Comparisons of the SF-12 summary scores among populations that differed in demographics were performed for discriminant validity. Total 1343 individuals aged ≥60 and reliability coefficient (0.812) reflected satisfactory internal consistency reliability of SF-12. EFA extracted a two-factor model (physical and mental health). About 60.7 % of the total variance was explained by the two factors. CFA showed that the two-factor solution provided a good fit to the data. Good convergent validity and discriminant validity of SF-12 were proved by the correction analyses (Spearman's ρ > 0.4) and the comparisons of the SF-12 summary scores among populations (P  0.4, P reliability and validity in measuring health status of Chinese community elderly population in Xujiahui district of Shanghai.

  3. Importance of human factors on nuclear installations safety

    International Nuclear Information System (INIS)

    Caruso, G.J.

    1990-01-01

    Actually, installations safety and, in particular the nuclear installations infer a strong incidence in human factors related to the design and operation of such installations. In general, the experience aims to that the most important accidents have happened as result of the components' failures combination and human failures in the operation of safety systems. Human factors in the nuclear installations may be divided into two areas: economy and human reliability. Human factors treatments for the safety evaluation of the nuclear installations allow to diagnose the weak points of man-machine interaction. (Author) [es

  4. Quantitative studies of transfer in vivo of low density, Sf 12-60, and Sf 60-400 lipoproteins between plasma and arterial intima in humans

    International Nuclear Information System (INIS)

    Shaikh, M.; Wootton, R.; Nordestgaard, B.G.; Baskerville, P.; Lumley, J.S.; La Ville, A.E.; Quiney, J.; Lewis, B.

    1991-01-01

    To assess the potential of various plasma lipoprotein classes to contribute to the lipid content of the arterial intima, influx and efflux of these plasma lipoprotein fractions into and from the intima of human carotid arteries were measured in vivo. While low density lipoprotein (LDL) is known to transfer from plasma into the arterial wall, there is less information on the atherogenic potential of lipoproteins of intermediate density (Sf 12-60) or of very low density (Sf 60-400). Aliquots of the same lipoprotein (LDL, Sf 12-60 lipoprotein particles, or Sf 60-400 lipoprotein particles) iodinated with iodine-125 and iodine-131 were injected intravenously 18-29 hours and 3-6 hours, respectively, before elective surgical removal of atheromatous arterial tissue, and the intimal clearance of lipoproteins, lipoprotein influx, and fractional loss of newly entered lipoproteins were calculated. Intimal clearance of Sf 60-400 particles was not detectable (less than 0.3 microliter x hr-1 x cm-2), whereas the average value for both LDL and Sf 12-60 lipoprotein particles was 0.9 microliter x hr-1 x cm-2. Since the fractional loss of newly entered LDL and Sf 12-60 lipoprotein particles was also similar, the results suggest similar modes of entry and exit for these two particles. However, due to lower plasma concentrations of Sf 12-60 lipoproteins as compared with LDL, the mass influx of cholesterol in the Sf 12-60 particles was on the order of one 10th of that in LDL, and that of apolipoprotein B was about one 20th

  5. The role of psychological factors in workplace safety.

    Science.gov (United States)

    Kotzé, Martina; Steyn, Leon

    2013-01-01

    Workplace safety researchers and practitioners generally agree that it is necessary to understand the psychological factors that influence people's workplace safety behaviour. Yet, the search for reliable individual differences regarding psychological factors associated with workplace safety has lead to sparse results and inconclusive findings. The aim of this study was to investigate whether there are differences between the psychological factors, cognitive ability, personality and work-wellness of employees involved in workplace incidents and accidents and/or driver vehicle accidents and those who are not. The study population (N = 279) consisted of employees employed at an electricity supply organisation in South Africa. Mann-Whitney U-test and one-way ANOVA were conducted to determine the differences in the respective psychological factors between the groups. These results showed that cognitive ability did not seem to play a role in workplace incident/accident involvement, including driver vehicle accidents, while the wellness factors burnout and sense of coherence, as well as certain personality traits, namely conscientiousness, pragmatic and gregariousness play a statistically significant role in individuals' involvement in workplace incidents/accidents/driver vehicle accidents. Safety practitioners, managers and human resource specialists should take cognisance of the role of specifically work-wellness in workplace safety behaviour, as management can influence these negative states that are often caused by continuously stressful situations, and subsequently enhance work place safety.

  6. Human factors in safety and business management.

    Science.gov (United States)

    Vogt, Joachim; Leonhardt, Jorg; Koper, Birgit; Pennig, Stefan

    2010-02-01

    Human factors in safety is concerned with all those factors that influence people and their behaviour in safety-critical situations. In aviation these are, for example, environmental factors in the cockpit, organisational factors such as shift work, human characteristics such as ability and motivation of staff. Careful consideration of human factors is necessary to improve health and safety at work by optimising the interaction of humans with their technical and social (team, supervisor) work environment. This provides considerable benefits for business by increasing efficiency and by preventing incidents/accidents. The aim of this paper is to suggest management tools for this purpose. Management tools such as balanced scorecards (BSC) are widespread instruments and also well known in aviation organisations. Only a few aviation organisations utilise management tools for human factors although they are the most important conditions in the safety management systems of aviation organisations. One reason for this is that human factors are difficult to measure and therefore also difficult to manage. Studies in other domains, such as workplace health promotion, indicate that BSC-based tools are useful for human factor management. Their mission is to develop a set of indicators that are sensitive to organisational performance and help identify driving forces as well as bottlenecks. Another tool presented in this paper is the Human Resources Performance Model (HPM). HPM facilitates the integrative assessment of human factors programmes on the basis of a systematic performance analysis of the whole system. Cause-effect relationships between system elements are defined in process models in a first step and validated empirically in a second step. Thus, a specific representation of the performance processes is developed, which ranges from individual behaviour to system performance. HPM is more analytic than BSC-based tools because HPM also asks why a certain factor is

  7. Supershort avalanche electron beam in SF6 and krypton

    Science.gov (United States)

    Zhang, Cheng; Tarasenko, Victor F.; Gu, Jianwei; Baksht, Evgeni Kh.; Beloplotov, Dmitry V.; Burachenko, Alexander G.; Yan, Ping; Lomaev, Mikhail I.; Shao, Tao

    2016-03-01

    Runaway electrons play an important role in the avalanche formation in nanosecond- and subnanosecond- pulse discharges. In this paper, characteristics of a supershort avalanche electron beam (SAEB) generated at the subnanosecond and nanosecond breakdown in sulfur hexafluoride (SF6 ) in an inhomogeneous electric field were studied. One pulser operated at negative polarity with voltage pulse amplitude of ˜130 kV and rise time of 0.3 ns. The other pulser operated at negative polarity with voltage pulse amplitude of 70 kV and rise time of ˜1.6 ns . SAEB parameters in SF6 are compared with those obtained in krypton (Kr), nitrogen (N2 ), air, and mixtures of SF6 with krypton or nitrogen. Experimental results showed that SAEB currents appeared during the rise-time of the voltage pulse for both pulsers. Moreover, amplitudes of the SAEB current in SF6 and Kr approximately ranged from several to tens of milliamps at atmospheric pressure, which were smaller than those in N2 and air (ranging from hundreds of milliamps to several amperes). Furthermore, the concentration of SF6 additive could significantly reduce the SAEB current in N2-SF6 mixture, but it slightly affected the SAEB current in Kr -SF6 mixture because of the atomic/molecular ionization cross section of the gas had a much greater impact on the SAEB current rather than the electronegativity.

  8. FFMPD scales: Comparisons with the FFM, PID-5, and CAT-PD-SF.

    Science.gov (United States)

    Crego, Cristina; Oltmanns, Joshua R; Widiger, Thomas A

    2018-01-01

    A series of 8 Five Factor Model Personality Disorder (FFMPD) scales have been developed to assess, from the perspective of the Five Factor Model (FFM), the maladaptive traits included within DSM-5 Section II personality disorders. An extensive body of FFMPD research has accumulated. However, for the most part, each study has been confined to the scales within 1 particular FFMPD Inventory. The current study considered 36 FFMPD scales, at least 1 from each of the 8 FFMPD inventories, including 8 scales considered to be from neuroticism, 8 from extraversion, 5 from openness, 8 from agreeableness, and 7 from conscientiousness. Their convergent, discriminant, and structural relationship with the FFM was considered, and compared with the structural relationship with the FFM obtained by the Personality Inventory for DSM-5 (PID-5) and the Computerized Adaptive Test-Personality Disorder-Static Form (CAT-PD-SF). Support for an FFM structure was obtained (albeit with agreeableness defining 1 factor and antagonism a separate factor). Similarities and differences across the FFMPD, PID-5, and CAT-PD-SF scales were highlighted. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  9. Genesis of a novel Shigella flexneri serotype by sequential infection of serotype-converting bacteriophages SfX and SfI

    Directory of Open Access Journals (Sweden)

    Sun Qiangzheng

    2011-12-01

    Full Text Available Abstract Background Shigella flexneri is the major pathogen causing bacillary dysentery. Fifteen serotypes have been recognized up to now. The genesis of new S. flexneri serotypes is commonly mediated by serotype-converting bacteriophages. Untypeable or novel serotypes from natural infections had been reported worldwide but have not been generated in laboratory. Results A new S. flexneri serotype-serotype 1 d was generated when a S. flexneri serotype Y strain (native LPS was sequentially infected with 2 serotype-converting bacteriophages, SfX first and then SfI. The new serotype 1 d strain agglutinated with both serotype X-specific anti-7;8 grouping serum and serotype 1a-specific anti- I typing serum, and differed from subserotypes 1a, 1b and 1c. Twenty four S. flexneri clinical isolates of serotype X were all converted to serotype 1 d by infection with phage SfI. PCR and sequencing revealed that SfI and SfX were integrated in tandem into the proA-yaiC region of the host chromosome. Conclusions These findings suggest a new S. flexneri serotype could be created in nature. Such a conversion may be constrained by susceptibility of a strain to infection by a given serotype-converting bacteriophage. This finding has significant implications in the emergence of new S. flexneri serotypes in nature.

  10. Organizational factors affecting safety implementation in food companies in Thailand.

    Science.gov (United States)

    Chinda, Thanwadee

    2014-01-01

    Thai food industry employs a massive number of skilled and unskilled workers. This may result in an industry with high incidences and accident rates. To improve safety and reduce the accident figures, this paper investigates factors influencing safety implementation in small, medium, and large food companies in Thailand. Five factors, i.e., management commitment, stakeholders' role, safety information and communication, supportive environment, and risk, are found important in helping to improve safety implementation. The statistical analyses also reveal that small, medium, and large food companies hold similar opinions on the risk factor, but bear different perceptions on the other 4 factors. It is also found that to improve safety implementation, the perceptions of safety goals, communication, feedback, safety resources, and supervision should be aligned in small, medium, and large companies.

  11. Measuring physical and mental health using the SF-12: implications for community surveys of mental health.

    Science.gov (United States)

    Windsor, Timothy D; Rodgers, Bryan; Butterworth, Peter; Anstey, Kaarin J; Jorm, Anthony F

    2006-09-01

    The effects of using different approaches to scoring the SF-12 summary scales of physical and mental health were examined with a view to informing the design and interpretation of community-based survey research. Data from a population-based study of 7485 participants in three cohorts aged 20-24, 40-44 and 60-64 years were used to examine relationships among measures of physical and mental health calculated from the same items using the SF-12 and RAND-12 approaches to scoring, and other measures of chronic physical conditions and psychological distress. A measure of physical health constructed using the RAND-12 scoring showed a monotonic negative association with psychological distress as measured by the Goldberg depression and anxiety scales. However, a non-monotonic association was evident in the relationship between SF-12 physical health scores and distress, with very high SF-12 physical health scores corresponding with high levels of distress. These relationships highlight difficulties in interpretation that can arise when using the SF-12 summary scales in some analytical contexts. It is recommended that community surveys that measure physical and mental functioning using the SF-12 items generate summary scores using the RAND-12 protocol in addition to the SF-12 approach. In general, researchers should be wary of using factor scores based on orthogonal rotation, which assumes that measures are uncorrelated, to represent constructs that have an actual association.

  12. Development of short-form and screening cutoff point of the Smartphone Addiction Inventory (SPAI-SF).

    Science.gov (United States)

    Lin, Yu-Hsuan; Pan, Yuan-Chien; Lin, Sheng-Hsuan; Chen, Sue-Huei

    2017-06-01

    Smartphone addiction is considered a form of technological addiction that has attracted increasing attention. The present study developed and validated the short-form Smartphone Addiction Inventory (SPAI-SF) and established cutoff point for screening smartphone addiction based on diagnostic criteria established by psychiatric interview. A total of 268 participants completed an online survey that collected demographic data, smartphone use behaviours, and responses to the 26-item SPAI. Each participant also completed a psychiatric interview. Confirmatory factor analysis (CFA) revealed that the 10-item SPAI-SF replicated the structure of original 26-item SPAI accurately, yielding a four-factor model consisting of compulsive behaviour, functional impairment, withdrawal, and tolerance. For maximal diagnostic accuracy, a cutoff point of 24/25 best discriminated cases of smartphone addiction from diagnostic negatives. The present findings suggest that both the 26-item SPAI and SPAI-SF manifest the four constructs of behavioural addiction and the characteristics of smartphone addiction. The cutoff point determined by psychiatrists' diagnostic interview will be useful for clinical screening and epidemiologic research. Copyright © 2016 John Wiley & Sons, Ltd.

  13. Prognose: SF den store vinder af kommunalvalget

    DEFF Research Database (Denmark)

    Thomsen, Søren Risbjerg

    2009-01-01

    KV-09: SF stormer ifølge Altinget.dks prognose ind i byråd og ikke mindst regionsråd ved valget til november, mens Radikale halveres.......KV-09: SF stormer ifølge Altinget.dks prognose ind i byråd og ikke mindst regionsråd ved valget til november, mens Radikale halveres....

  14. Determination of engineering safety factor -routine in Hungary (a methodology for the normal operation local power engineering safety factors)

    International Nuclear Information System (INIS)

    Szecsenyi, Z.; Korpas, L.; Bona, G.; Kereszturi, A.

    2010-01-01

    From the late nineties Paks Nuclear Power Plant-in collaboration with KFKI Atomic Energy Research Institute (KFKI AEKI)- is developing a system for determining the normal operation local power engineering safety factors. The system is based on a Monte Carlo sampling of the uncertain model input parameters. Additionally, the comparison of the calculation to the in-core measurements plays essential role for determining some important input parameters. By using new fuel types and the corresponding more recent detailed technological data, the applied method is being improved from time to time. Presently, the actually used and authorized engineering safety factors at Paks NPP are determined by using this method. In the paper, the system.s main properties are described (not going beyond the possible extent). The main points are as follows:-Mathematical definition of the engineering safety factor;-Sources of the uncertainties;-Input error propagation method constituting the basis of the system;-Flow-chart of the subsequent steps of the determination Finally, in the paper the engineering safety factors values of some selected parameters are presented as examples for demonstration of the capability of the method. (Authors)

  15. Development and validation of the alcohol Expectancy Questionnaire Short Form (EQ-SF).

    Science.gov (United States)

    Mezquita, Laura; Camacho, Laura; Suso-Ribera, Carlos; Ortet, Generós; Ibáñez, Manuel I

    2018-01-15

    Alcohol expectancies are proximal variables to alcohol use and misuse. In recent decades, different measures have been developed to assess this construct. One of the most frequently used and recommended instruments is the Expectancy Questionnaire (EQ; Leigh y Stacy, 1993). Our aim is to develop a short version of the EQ (EQ-SF) for suitable use in time-limited administrations. Two samples, adolescents (N = 514, 57.20% females) and adults (N = 548, 61.50% females), completed the EQ together with alcohol-use measures. Different item selection strategies were applied to select the 24 items. The EQ-SF structure was explored using confirmatory factor analysis, and measurement invariance was tested running a multi-group analysis comparing groups by sex and age. Reliability was tested using Cronbach's alpha and omega coefficients. Concurrent validity was investigated with regression analyses. The EQ-SF showed acceptable between-groups measurement invariance. Alphas and omegas ranged from .77 to .93. Positive expectancies predicted both alcohol use and alcohol-related problems. Negative expectancies predicted alcohol-related problems. Sex and age moderated these associations. Males with high positive alcohol expectancies showed higher alcohol consumption than females, while adults with high negative alcohol expectancies showed greater alcohol-related problems than adolescents. Different evidence on the validity and reliability of the EQ-SF suggest that it is a suitable instrument to assess alcohol expectancies in the Spanish population.

  16. New engineering safety factors for Loviisa NPP core calculations

    Energy Technology Data Exchange (ETDEWEB)

    Kuopanportti, Jaakko; Saarinen, Simo; Lahtinen, Tuukka; Ekstroem, Karoliina [Fortum Power and Heat Ltd., Fortum (Finland)

    2017-09-15

    In Loviisa NPP, there are two limiting thermal margins called the enthalpy rise margin and the linear heat rate margin that are monitored during normal operation. Engineering safety factors are applied in determination of both of these factors. The factors take into account the effect of various manufacturing tolerances, impact of the irradiation and simulation uncertainties on the local heat rate and on the enthalpy of the coolant. The engineering factors were re-evaluated during 2015 and the factors were approved by the Finnish radiation and nuclear safety authority in 2016. The re-evaluation was performed by considering all of the identified phenomena that affect the local heat rate or the enthalpy of the coolant. This paper summarizes the work that was performed during the re-evaluation of the engineering safety factors and presents the results for each uncertainty component. The new engineering safety factors are 1.115 for the linear heat rate and 1.100 for the enthalpy rise margin when the old factors were 1.12 and 1.16, respectively. The new factors improve the fuel economy by about 1%.

  17. Supershort avalanche electron beam in SF_{6} and krypton

    Directory of Open Access Journals (Sweden)

    Cheng Zhang (章程

    2016-03-01

    Full Text Available Runaway electrons play an important role in the avalanche formation in nanosecond- and subnanosecond- pulse discharges. In this paper, characteristics of a supershort avalanche electron beam (SAEB generated at the subnanosecond and nanosecond breakdown in sulfur hexafluoride (SF_{6} in an inhomogeneous electric field were studied. One pulser operated at negative polarity with voltage pulse amplitude of ∼130  kV and rise time of 0.3 ns. The other pulser operated at negative polarity with voltage pulse amplitude of 70 kV and rise time of ∼1.6  ns. SAEB parameters in SF_{6} are compared with those obtained in krypton (Kr, nitrogen (N_{2}, air, and mixtures of SF_{6} with krypton or nitrogen. Experimental results showed that SAEB currents appeared during the rise-time of the voltage pulse for both pulsers. Moreover, amplitudes of the SAEB current in SF_{6} and Kr approximately ranged from several to tens of milliamps at atmospheric pressure, which were smaller than those in N_{2} and air (ranging from hundreds of milliamps to several amperes. Furthermore, the concentration of SF_{6} additive could significantly reduce the SAEB current in N_{2}-SF_{6} mixture, but it slightly affected the SAEB current in Kr-SF_{6} mixture because of the atomic/molecular ionization cross section of the gas had a much greater impact on the SAEB current rather than the electronegativity.

  18. Normative data and discriminative properties of short form 36 (SF-36 in Turkish urban population

    Directory of Open Access Journals (Sweden)

    Akvardar Yildiz

    2006-10-01

    Full Text Available Abstract Background SF-36 has been both translated into different languages and adapted to different cultures to obtain comparable data on health status internationally. However there have been only a limited number of studies focused on the discriminative ability of SF-36 regarding social and disease status in developing countries. The aim of this study was to obtain population norms of the short form 36 (SF-36 health survey and the association of SF-36 domains with demographic and socioeconomic variables in an urban population in Turkey. Methods A cross-sectional study. Face to face interviews were carried out with a sample of households. The sample was systematically selected from two urban Health Districts in Izmir, Turkey. The study group consisted of 1,279 people selected from a study population of 46,290 people aged 18 and over. Results Internal consistencies of the scales were high, with the exception of mental health and vitality. Physical health scales were associated with both age and gender. On the other hand, mental health scales were less strongly associated with age and gender. Women reported poorer health compared to men in general. Social risk factors (employment status, lower education and economic strain were associated with worse health profiles. The SF-36 was found to be capable of discriminating disease status. Conclusion Our findings, cautiously generalisable to urban population, suggest that the SF-36 can be a valuable tool for studies on health outcomes in Turkish population. SF-36 may also be a promising measure for research on health inequalities in Turkey and other developing countries.

  19. SF-36 total score as a single measure of health-related quality of life: Scoping review.

    Science.gov (United States)

    Lins, Liliane; Carvalho, Fernando Martins

    2016-01-01

    According to the 36-Item Short Form Health Survey questionnaire developers, a global measure of health-related quality of life such as the "SF-36 Total/Global/Overall Score" cannot be generated from the questionnaire. However, studies keep on reporting such measure. This study aimed to evaluate the frequency and to describe some characteristics of articles reporting the SF-36 Total/Global/Overall Score in the scientific literature. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses method was adapted to a scoping review. We performed searches in PubMed, Web of Science, SCOPUS, BVS, and Cochrane Library databases for articles using such scores. We found 172 articles published between 1997 and 2015; 110 (64.0%) of them were published from 2010 onwards; 30.0% appeared in journals with Impact Factor 3.00 or greater. Overall, 129 (75.0%) out of the 172 studies did not specify the method for calculating the "SF-36 Total Score"; 13 studies did not specify their methods but referred to the SF-36 developers' studies or others; and 30 articles used different strategies for calculating such score, the most frequent being arithmetic averaging of the eight SF-36 domains scores. We concluded that the "SF-36 Total/Global/Overall Score" has been increasingly reported in the scientific literature. Researchers should be aware of this procedure and of its possible impacts upon human health.

  20. The PIANC Safety Factor System for Breakwaters

    DEFF Research Database (Denmark)

    Burcharth, H. F.

    2000-01-01

    The paper presents a summary of the recommendations for implementation of safety in breakwater designs given by the PIANC PTC IT Working Group No 12 on Analysis of Rubble Mound Breakwaters with Vertical and Inclined Concrete Walls. The working groups developed for the most important failure modes...... a system of partial safety factors which facilitate design to any target safety level....

  1. Theoretical and experimental studies of N and SF2 reaction

    International Nuclear Information System (INIS)

    Yu Shuqin; Zhou Xiaoguo

    2000-02-01

    In this paper, free radical reaction of N+SF 2 induced by dc discharge in N 2 and SF 6 system was examined. Although the NS + (m/z = 46) ion signals were detected, NS + is not the spectral carrier from obtained REMPI spectra analysis. Ab initio quantum calculation shows that NSF is the main product of N + SF 2 . It is confirmed from this calculation that NS + obtained in experiment was produced by multiphoton ionization and dissociation of NSF which is real product of N + SF 2 reaction. (author)

  2. Electron scattering cross sections for SF6 and SF5CF3 at intermediate and high energies (100-10000 eV)

    International Nuclear Information System (INIS)

    Limao-Vieira, P.; Blanco, F.; Oller, J.C.; Munoz, A.; Perez, J.M.; Vinodkumar, M.; Garcia, G.; Mason, N.J.

    2005-01-01

    A modified experimental apparatus with improved angular resolution and stability has been used to measure the total electron scattering cross sections for SF 6 and SF 5 CF 3 in the energy range of 100-5000 eV. A detailed analysis of the experimental error sources is provided. The experimental results are compared with integral elastic and inelastic cross sections calculated using the independent atom model approximation and a modified single-center additivity rule for electron energies ranging from 1 to 10,000 eV. The accuracy of these approximations method is discussed through a comparison with the experimental results. Previous cross-sectional data for SF 6 are compared with the present theoretical and experimental results. For SF 5 CF 3 , we present the first electron scattering cross-sectional data for the 100-10,000 eV energy range, as well as the first empirical determination of the molecular polarizability

  3. SfDredd, a Novel Initiator Caspase Possessing Activity on Effector Caspase Substrates in Spodoptera frugiperda.

    Science.gov (United States)

    Yang, Zhouning; Zhou, Ke; Liu, Hao; Wu, Andong; Mei, Long; Liu, Qingzhen

    2016-01-01

    Sf9, a cell line derived from Spodoptera frugiperda, is an ideal model organism for studying insect apoptosis. The first notable study that attempted to identify the apoptotic pathway in Sf9 was performed in 1997 and included the discovery of Sf-caspase-1, an effector caspase of Sf9. However, it was not until 2013 that the first initiator caspase in Sf9, SfDronc, was discovered, and the apoptotic pathway in Sf9 became clearer. In this study, we report another caspase of Sf9, SfDredd. SfDredd is highly similar to insect initiator caspase Dredd homologs. Experimentally, recombinant SfDredd underwent autocleavage and exhibited different efficiencies in cleavage of synthetic caspase substrates. This was attributed to its caspase activity for the predicted active site mutation blocked the above autocleavage and synthetic caspase substrates cleavage activity. SfDredd was capable of not only cleaving Sf-caspase-1 in vitro but also cleaving Sf-caspase-1 and inducing apoptosis when it was co-expressed with Sf-caspase-1 in Sf9 cells. The protein level of SfDredd was increased when Sf9 cells were treated by Actinomycin D, whereas silencing of SfDredd reduced apoptosis and Sf-caspase-1 cleavage induced by Actinomycin D treatment. These results clearly indicate that SfDredd functioned as an apoptotic initiator caspase. Apoptosis induced in Sf9 cells by overexpression of SfDredd alone was not as obvious as that induced by SfDronc alone, and the cleavage sites of Sf-caspase-1 for SfDredd and SfDronc are different. In addition, despite sharing a sequence homology with initiator caspases and possessing weak activity on initiator caspase substrates, SfDredd showed strong activity on effector caspase substrates, making it the only insect caspase reported so far functioning similar to human caspase-2 in this aspect. We believe that the discovery of SfDredd, and its different properties from SfDronc, will improve the understanding of apoptosis pathway in Sf9 cells.

  4. Analysis of factors influencing safety management for metro construction in China.

    Science.gov (United States)

    Yu, Q Z; Ding, L Y; Zhou, C; Luo, H B

    2014-07-01

    With the rapid development of urbanization in China, the number and size of metro construction projects are increasing quickly. At the same time, and increasing number of accidents in metro construction make it a disturbing focus of social attention. In order to improve safety management in metro construction, an investigation of the participants' perspectives on safety factors in China metro construction has been conducted to identify the key safety factors, and their ranking consistency among the main participants, including clients, consultants, designers, contractors and supervisors. The result of factor analysis indicates that there are five key factors which influence the safety of metro construction including safety attitude, construction site safety, government supervision, market restrictions and task unpredictability. In addition, ANOVA and Spearman rank correlation coefficients were performed to test the consistency of the means rating and the ranking of safety factors. The results indicated that the main participants have significant disagreement about the importance of safety factors on more than half of the items. Suggestions and recommendations on practical countermeasures to improve metro construction safety management in China are proposed. Copyright © 2013 Elsevier Ltd. All rights reserved.

  5. Safety of Nuclear Power Plants: Commissioning and Operation. Specific Safety Requirements

    International Nuclear Information System (INIS)

    2016-01-01

    This publication describes the requirements to be met to ensure the safe operation of nuclear power plants. It takes into account developments in areas such as long term operation of nuclear power plants, plant ageing, periodic safety review, probabilistic safety analysis and risk informed decision making processes. In addition, the requirements are governed by, and must apply, the safety objective and safety principles that are established in the IAEA Safety Standards Series No. SF-1, Fundamental Safety Principles. A review of Safety Requirements publications was commenced in 2011 following the accident in the Fukushima Daiichi nuclear power plant in Japan. The review revealed no significant areas of weakness and resulted in just a small set of amendments to strengthen the requirements and facilitate their implementation, which are contained in the present publication

  6. Stability of midazolam in syrspend SF and syrspend SF cherry.

    Science.gov (United States)

    Geiger, Christine M; Sorenson, Bridget; Whaley, Paul A

    2013-01-01

    Midazolam is a short-acting benzodiazepine central nervous system depressant available as an injection, tablet, or oral syrup. The need for alternative dosage form options for patients unable to take tablets and shortages of other forms of the drug have led compounding pharmacies to seek alternatives, mainly solutions and suspensions. Additionally, some patients are unable to use suspending agents containing alcohol or sorbitol. The objective of this study was to determine the stability of midazolam in sorbitol-free, alcohol-free SyrSpend SF and SyrSpend SF Cherry suspending agents. The studied samples were compounded into a 1-mg/mL suspension and stored in low-actinic plastic bottles at temperatures between 2 degrees C to 8 degrees C and at room temperature conditions. Six samples were assayed at each time point out to 58 days by a stability-indicating high-performance liquid chromatography method. The method was validated for its specificity through forced-degradation studies. The samples remained within 90% to 110% of the initial concentration throughout the course of the study. Based on the data collected, the beyond-use date of these preparations is at least 58 days when protected from light at both refrigerated and room temperature storage conditions.

  7. CF3SF5 : a ‘super’ greenhouse gas

    OpenAIRE

    Tuckett, R. P.

    2008-01-01

    One molecule of the anthropogenic pollutant trifluoromethyl sulphur pentafluoride (CF\\(_3\\)SF\\(_5\\)), an adduct of the CF\\(_3\\) and SF\\(_5\\) free radicals, causes more global warming than one molecule of any other greenhouse gas yet detected in the Earth’s atmosphere. That is, it has the highest per molecule radiative forcing of any greenhouse pollutant, and the value of its global warming potential is only exceeded by that of SF\\(_6\\). First, the greenhouse effect is described, the propertie...

  8. mathematical models for prediction of safety factors for a simply

    African Journals Online (AJOL)

    HOD

    Keywords: reliability, code calibration, load factor, safety factor, design, steel beam. 1. INTRODUCTION ... safety factors for the design of a simply supported steel beam using regression .... 5 design criteria for a solid timber portal frame.

  9. SafetyNet. Human factors safety training on the Internet

    DEFF Research Database (Denmark)

    Hauland, G.; Pedrali, M.

    2002-01-01

    This report describes user requirements to an Internet based distance learning system of human factors training, i.e. the SafetyNet prototype, within the aviation (pilots and air traffic control), maritime and medical domains. User requirements totraining have been elicited through 19 semi...

  10. Failure and factors of safety in piping system design

    International Nuclear Information System (INIS)

    Antaki, G.A.

    1993-01-01

    An important body of test and performance data on the behavior of piping systems has led to an ongoing reassessment of the code stress allowables and their safety margin. The codes stress allowables, and their factors of safety, are developed from limits on the incipient yield (for ductile materials), or incipient rupture (for brittle materials), of a test specimen loaded in simple tension. In this paper, we examine the failure theories introduced in the B31 and ASME III codes for piping and their inherent approximations compared to textbook failure theories. We summarize the evolution of factors of safety in ASME and B31 and point out that, for piping systems, it is appropriate to reconsider the concept and definition of factors of safety

  11. Safety Aspects of Long Term Spent Fuel Dry Storage

    International Nuclear Information System (INIS)

    Botsch, Wolfgang; Smalian, S.; Hinterding, P.; Drotleff, H.; Voelzke, H.; Wolff, D.; Kasparek, E.

    2014-01-01

    As a consequence of the lack of a final repository for spent nuclear fuel (SF) and high level waste (HLW), long term interim storage of SF and HLW will be necessary. As with the storage of all radioactive materials, the long term storage of SF and HLW must conform to safety requirements. Safety aspects such as safe enclosure of radioactive materials, safe removal of decay heat, sub-criticality and avoidance of unnecessary radiation exposure must be achieved throughout the complete storage period. The implementation of these safety requirements can be achieved by dry storage of SF and HLW in casks as well as in other systems such as dry vault storage systems or spent fuel pools, where the latter is neither a dry nor a passive system. After the events of Fukushima, the advantages of passively and inherently safe dry storage systems have become more obvious. In Germany, dry storage of SF in casks fulfils both transport and storage requirements. Mostly, storage facilities are designed as concrete buildings above the ground; one storage facility has also been built as a rock tunnel. In all these facilities the safe enclosure of radioactive materials in dry storage casks is achieved by a double-lid sealing system with surveillance of the sealing system. The safe removal of decay heat is ensured by the design of the storage containers and the storage facility, which also secures to reduce the radiation exposure to acceptable levels. TUV and BAM, who work as independent experts for the competent authorities, inform about spent fuel management and issues concerning dry storage of spent nuclear fuel, based on their long experience in these fields. All relevant safety issues such as safe enclosure, shielding, removal of decay heat and sub-criticality are checked and validated with state-of-the-art methods and computer codes before the license approval. In our presentation we discuss which of these aspects need to be examined closer for a long term interim storage. It is shown

  12. Lens subluxation after plasmin and SF6 injections in rabbit eyes.

    Directory of Open Access Journals (Sweden)

    Wei-Chi Wu

    Full Text Available To investigate the rate of lens subluxation following plasmin and/or SF6 injections in eyes, and whether a subsequent elevated level of vascular endothelial growth factor (VEGF and vitreous tap would aggravate subluxation.Four groups of rabbits were used. Group 1 received an intravitreal injection (IVI of plasmin and SF6 in the right eye; group 2 received an IVI of plasmin in the right eye; group 3 received an IVI of SF6 in the right eye; and group 4 received an IVI of balanced salt solution in the right eye. After treatment, IVIs of VEGF were given and vitreous tap was performed three times, followed by clinical observation of lens subluxation and scanning electronic microscope evaluation of the zonular fibers.After IVIs of plasmin and SF6, and VEGF and vitreous tap had been performed one to three times, lens subluxation was noted in 0%, 43%, 71%, 71%, and 86% of the eyes in group 1. After IVIs of plasmin, VEGF, and vitreous tap had been performed one to three times, lens subluxation was noted in 11%, 22%, 44%, 44%, and 67% of the eyes in group 2. The eyes in group 3 and 4 did not show signs of lens subluxation after VEGF IVIs and vitreous tap. Histology confirmed zonular fiber damage in the eyes treated with plasmin.The incidence of lens subluxation increased following plasmin injections in the eyes, and this was aggravated by the subsequent high VEGF level in the eyes and vitreous tapping. Zonular fibers were disrupted following plasmin treatment. These effects should be kept in mind when using plasmin enzymes in patients with vitreoretinal abnormalities.

  13. Why do festival goers drink? Assessment of drinking motives using the DMQ-R SF in a recreational setting.

    Science.gov (United States)

    Németh, Zsófia; Kuntsche, Emmanuel; Urbán, Róbert; Farkas, Judit; Demetrovics, Zsolt

    2011-01-01

    The aim of this study is to confirm the four-dimensional structure and other measurement properties of the Drinking Motives Questionnaire Revised Short Form (DMQ-R SF) among young Hungarian adults in a recreational setting. In a 'Health Tent' at Europe's biggest music and cultural festival, 390 attendees (mean age 23.6, SD = 4.4) completed the DMQ-R SF and answered other alcohol-related questions. Data were analysed by confirmatory factor analysis, repeated measures anova and structural equation modelling. The results confirmed the good measurement properties of the DMQ-R SF in terms of factor loadings, model fit and internal consistency. These statistics were similar for men and women. For both genders, social motives were the most frequently indicated motivational dimension, followed by coping, conformity and enhancement. Social motives were consistently related to drinking, and coping to alcohol-related problems. It seems that the DMQ-R SF is a useful instrument for measuring the motivation to engage in drinking in recreational settings, such as parties, clubs and festivals, where hard-to-reach target groups vulnerable to risky drinking behaviour are present, but time for filling out questionnaires is restricted. © 2010 Australasian Professional Society on Alcohol and other Drugs.

  14. Risbjerg: SF vandt valgkampen, NA og R tabte

    DEFF Research Database (Denmark)

    Thomsen, Søren Risbjerg

    2007-01-01

    ANALYSE: Endnu engang flyttede en valgkamp for alvor stemmer. SF gik undervejs 27 pct. frem, mens NA gik 34 pct. tilbage og R 26 pct. Udgivelsesdato: 25. november......ANALYSE: Endnu engang flyttede en valgkamp for alvor stemmer. SF gik undervejs 27 pct. frem, mens NA gik 34 pct. tilbage og R 26 pct. Udgivelsesdato: 25. november...

  15. IAEA safety glossary. Terminology used in nuclear safety and radiation protection, multilingual 2007 edition, including the IAEA safety fundamentals [no. SF-1

    International Nuclear Information System (INIS)

    2008-10-01

    The IAEA Safety Glossary defines and explains technical terms used in the IAEA Safety Standards and other safety related IAEA publications, and provides information on their usage.The publication is multilingual and covers the six official IAEA languages,, Arabic, Chinese, English, French, Russian and Spanish. It has been in use since April 2000. The 2007 Edition is a revised and updated version. The primary purpose of the publication is to harmonize terminology and usage in the IAEA Safety Standards. It is a source of information for users of the IAEA Safety Standards and other safety related IAEA publications and provides guidance for the drafters and reviewers of publications, including IAEA technical officers and consultants, and members of technical committees, advisory groups, working groups and bodies for the endorsement of safety standards

  16. Electron attachment to the SF{sub 6} molecule

    Energy Technology Data Exchange (ETDEWEB)

    Smirnov, B. M., E-mail: bmsmirnov@gmail.com; Kosarim, A. V. [Russian Academy of Sciences, Joint Institute for High Temperatures (Russian Federation)

    2015-09-15

    Various models for transition between electron and nuclear subsystems are compared in the case of electron attachment to the SF{sub 6} molecule. Experimental data, including the cross section of electron attachment to this molecule as a function of the electron energy and vibrational temperature, the rate constants of this process in swarm experiments, and the rates of the chemionization process involving Rydberg atoms and the SF{sub 6} molecule, are collected and treated. Based on the data and on the resonant character of electron capture into an autodetachment ion state in accordance with the Breit–Wigner formula, we find that intersection of the molecule and negative ion electron terms proceeds above the potential well bottom of the molecule with the barrier height 0.05–0.1 eV, and the transition between these electron terms has both the tunnel and abovebarrier character. The limit of small electron energies e for the electron attachment cross section at room vibrational temperature takes place at ε ≪ 2 meV, while in the range 2 meV ≪ ε ≪ 80 meV, the cross section is inversely proportional to ε. In considering the attachment process as a result of the interaction between the electron and vibrational degrees of freedom, we find the coupling factor f between them to be f = aT at low vibrational temperatures T with a ≈ 3 × 10{sup −4} K{sup −1}. The coupling factor is independent of the temperature at T > 400 K.

  17. 76 FR 35130 - Pipeline Safety: Control Room Management/Human Factors

    Science.gov (United States)

    2011-06-16

    ...: Control Room Management/Human Factors AGENCY: Pipeline and Hazardous Materials Safety Administration... the Control Room Management/Human Factors regulations in order to realize the safety benefits sooner... FR 5536). By this amendment to the Control Room Management/Human Factors (CRM) rule, an operator must...

  18. Two-temperature transport coefficients of SF6–N2 plasma

    International Nuclear Information System (INIS)

    Yang, Fei; Chen, Zhexin; Wu, Yi; Rong, Mingzhe; Wang, Chunlin; Guo, Anxiang; Liu, Zirui

    2015-01-01

    Sulfur hexafluoride (SF 6 ) is widely adopted in electric power industry, especially in high-voltage circuit breakers and gas-insulated switchgear. However, the use of SF 6 is limited by its high liquidation temperature and high global warming potential. Recently, research shows SF 6 –N 2 mixture, which shows environmental friendliness and good electrical properties, may be a feasible substitute for pure SF 6 . This paper is devoted to the calculation of and transport coefficients of SF 6 –N 2 mixture under both LTE (local thermodynamic equilibrium) and non-LTE condition. The two–temperature mass action law was used to determine the composition. The transport coefficients were calculated by classical Chapman–Enskog method simplified by Devoto. The thermophysical properties are presented for electron temperatures of 300–40 000 K, ratios of electron to heavy species temperature of 1–10 and N 2 mole fraction of 0%–100% at atmospheric pressure. The ionization processes under both LTE and non-LTE have been discussed. The results show that deviations from local thermodynamic equilibrium significantly affect the properties of SF 6 –N 2 plasma, especially before the plasma is fully ionized. The different influence of N 2 on properties for SF 6 –N 2 plasma in and out of LTE has been found. The results will serve as reliable reference data for computational simulation of the behavior of SF 6 –N 2 plasmas

  19. Emissions from SF6 appliances in Norway. Additional report No. 2

    International Nuclear Information System (INIS)

    Gjarede, Anne Cathrine

    1999-01-01

    The report presents facts regarding the Norwegian SF 6 emissions and the significance for the Norwegian climatic gas accounts in order to evaluate whether 12-24 kV SF 6 appliances are environmentally acceptable. Estimations show that emissions from such equipment contribute with about 0.2 % of the total Norwegian CO 2 emissions in 1993. The SF 6 which is stored in electric appliances, may either be recycled or decomposed to more environmentally acceptable end products. The report concludes that the contribution to the greenhouse effects from SF 6 appliances is minimal

  20. Nuclear safety regulation on nuclear safety equipment activities in relation to human and organizational factors

    International Nuclear Information System (INIS)

    Li Tianshu

    2013-01-01

    Based on years of knowledge in nuclear safety supervision and experience of investigating and dealing with violation events in repair welding of DFHM, this paper analyzes major faults in manufacturing and maintaining activities of nuclear safety equipment in relation to human and organizational factors. It could be deducted that human and organizational factors has definitely become key features in the development of nuclear energy and technology. Some feasible measures to reinforce supervision on nuclear safety equipment activities have also been proposed. (author)

  1. Smart SfM: Salinas Archaeological Museum

    Science.gov (United States)

    Inzerillo, L.

    2017-08-01

    In these last years, there has been an increasing use of the Structure from Motion (SfM) techniques applied to Cultural Heritage. The accessibility of SfM software can be especially advantageous to users in non-technical fields or to those with limited resources. Thanks to SfM using, everyone can make with a digital camera a 3D model applied to an object of both Cultural Heritage, and physically Environment, and work arts, etc. One very interesting and useful application can be envisioned into museum collection digitalization. In the last years, a social experiment has been conducted involving young generation to live a social museum using their own camera to take pictures and videos. Students of university of Catania and Palermo were involved into a national event #digitalinvasion (2015-2016 editions) offering their personal contribution: they realized 3D models of the museums collection through the SfM techniques. In particular at the National Archaeological Museum Salinas in Palermo, it has been conducted an organized survey to recognize the most important part of the archaeological collection. It was a success: in both #digitalinvasion National Event 2015 and 2016 the young students of Engineering classes carried out, with Photoscan Agisoft, more than one hundred 3D models some of which realized by phone camera and some other by reflex camera and some other with compact camera too. The director of the museum has been very impressed from these results and now we are going to collaborate at a National project to use the young generation crowdsourcing to realize a semi-automated monitoring system at Salinas Archaeological Museum.

  2. SMART SfM: SALINAS ARCHAEOLOGICAL MUSEUM

    Directory of Open Access Journals (Sweden)

    L. Inzerillo

    2017-08-01

    Full Text Available In these last years, there has been an increasing use of the Structure from Motion (SfM techniques applied to Cultural Heritage. The accessibility of SfM software can be especially advantageous to users in non-technical fields or to those with limited resources. Thanks to SfM using, everyone can make with a digital camera a 3D model applied to an object of both Cultural Heritage, and physically Environment, and work arts, etc. One very interesting and useful application can be envisioned into museum collection digitalization. In the last years, a social experiment has been conducted involving young generation to live a social museum using their own camera to take pictures and videos. Students of university of Catania and Palermo were involved into a national event #digitalinvasion (2015-2016 editions offering their personal contribution: they realized 3D models of the museums collection through the SfM techniques. In particular at the National Archaeological Museum Salinas in Palermo, it has been conducted an organized survey to recognize the most important part of the archaeological collection. It was a success: in both #digitalinvasion National Event 2015 and 2016 the young students of Engineering classes carried out, with Photoscan Agisoft, more than one hundred 3D models some of which realized by phone camera and some other by reflex camera and some other with compact camera too. The director of the museum has been very impressed from these results and now we are going to collaborate at a National project to use the young generation crowdsourcing to realize a semi-automated monitoring system at Salinas Archaeological Museum.

  3. Hepatocyte growth factor/scatter factor-MET signaling in neural crest-derived melanocyte development.

    Science.gov (United States)

    Kos, L; Aronzon, A; Takayama, H; Maina, F; Ponzetto, C; Merlino, G; Pavan, W

    1999-02-01

    The mechanisms governing development of neural crest-derived melanocytes, and how alterations in these pathways lead to hypopigmentation disorders, are not completely understood. Hepatocyte growth factor/scatter factor (HGF/SF) signaling through the tyrosine-kinase receptor, MET, is capable of promoting the proliferation, increasing the motility, and maintaining high tyrosinase activity and melanin synthesis of melanocytes in vitro. In addition, transgenic mice that ubiquitously overexpress HGF/SF demonstrate hyperpigmentation in the skin and leptomenigenes and develop melanomas. To investigate whether HGF/ SF-MET signaling is involved in the development of neural crest-derived melanocytes, transgenic embryos, ubiquitously overexpressing HGF/SF, were analyzed. In HGF/SF transgenic embryos, the distribution of melanoblasts along the characteristic migratory pathway was not affected. However, additional ectopically localized melanoblasts were also observed in the dorsal root ganglia and neural tube, as early as 11.5 days post coitus (p.c.). We utilized an in vitro neural crest culture assay to further explore the role of HGF/SF-MET signaling in neural crest development. HGF/SF added to neural crest cultures increased melanoblast number, permitted differentiation into pigmented melanocytes, promoted melanoblast survival, and could replace mast-cell growth factor/Steel factor (MGF) in explant cultures. To examine whether HGF/SF-MET signaling is required for the proper development of melanocytes, embryos with a targeted Met null mutation (Met-/-) were analysed. In Met-/- embryos, melanoblast number and location were not overtly affected up to 14 days p.c. These results demonstrate that HGF/SF-MET signaling influences, but is not required for, the initial development of neural crest-derived melanocytes in vivo and in vitro.

  4. Electrochemical and Infrared Absorption Spectroscopy Detection of SF6 Decomposition Products

    Directory of Open Access Journals (Sweden)

    Ming Dong

    2017-11-01

    Full Text Available Sulfur hexafluoride (SF6 gas-insulated electrical equipment is widely used in high-voltage (HV and extra-high-voltage (EHV power systems. Partial discharge (PD and local heating can occur in the electrical equipment because of insulation faults, which results in SF6 decomposition and ultimately generates several types of decomposition products. These SF6 decomposition products can be qualitatively and quantitatively detected with relevant detection methods, and such detection contributes to diagnosing the internal faults and evaluating the security risks of the equipment. At present, multiple detection methods exist for analyzing the SF6 decomposition products, and electrochemical sensing (ES and infrared (IR spectroscopy are well suited for application in online detection. In this study, the combination of ES with IR spectroscopy is used to detect SF6 gas decomposition. First, the characteristics of these two detection methods are studied, and the data analysis matrix is established. Then, a qualitative and quantitative analysis ES-IR model is established by adopting a two-step approach. A SF6 decomposition detector is designed and manufactured by combining an electrochemical sensor and IR spectroscopy technology. The detector is used to detect SF6 gas decomposition and is verified to reliably and accurately detect the gas components and concentrations.

  5. Electrochemical and Infrared Absorption Spectroscopy Detection of SF6 Decomposition Products

    Science.gov (United States)

    Dong, Ming; Ren, Ming; Ye, Rixin

    2017-01-01

    Sulfur hexafluoride (SF6) gas-insulated electrical equipment is widely used in high-voltage (HV) and extra-high-voltage (EHV) power systems. Partial discharge (PD) and local heating can occur in the electrical equipment because of insulation faults, which results in SF6 decomposition and ultimately generates several types of decomposition products. These SF6 decomposition products can be qualitatively and quantitatively detected with relevant detection methods, and such detection contributes to diagnosing the internal faults and evaluating the security risks of the equipment. At present, multiple detection methods exist for analyzing the SF6 decomposition products, and electrochemical sensing (ES) and infrared (IR) spectroscopy are well suited for application in online detection. In this study, the combination of ES with IR spectroscopy is used to detect SF6 gas decomposition. First, the characteristics of these two detection methods are studied, and the data analysis matrix is established. Then, a qualitative and quantitative analysis ES-IR model is established by adopting a two-step approach. A SF6 decomposition detector is designed and manufactured by combining an electrochemical sensor and IR spectroscopy technology. The detector is used to detect SF6 gas decomposition and is verified to reliably and accurately detect the gas components and concentrations. PMID:29140268

  6. Quality of life in women with postmenopausal osteoporosis: correlation between QUALEFFO 41 and SF-36.

    Science.gov (United States)

    de Oliveira Ferreira, Néville; Arthuso, Michael; da Silva, Raimunda; Pedro, Adriana Orcesi; Pinto Neto, Aarão Mendes; Costa-Paiva, Lucia

    2009-01-20

    To evaluate quality of life (QoL) in women with postmenopausal osteoporosis, correlating the QUALEFFO 41 with the short-form health survey 36 (SF-36) and evaluated some factors that can influenced the QoL of women with osteoporosis. A cross-sectional study was conducted in 220 postmenopausal women (ages ranging from 55 to 80 years). Of the total number, 110 women had osteoporosis and 110 women did not have osteoporosis and these women were age-matched (+/-3 years). Two questionnaires were administered to all subjects for evaluation of QoL: the quality of life questionnaire of the European foundation for Osteoporosis 41 (QUALEFFO 41) and the short-form health survey 36 (SF-36). For data analysis, a significance level of 5% was set (posteoporosis had a worse QoL both in the QUALEFFO 41 and in the SF-36, in all domains studied. Data was adjusted for BMI, race, school education and use of HT (p25 and sedentary lifestyle. In contrast, paid work was associated with a better QoL (CI=95%). Women with osteoporosis had an impaired QoL, especially relating to the physical, psychological and social aspects. The factors associated with QoL were obesity, sedentary lifestyle and paid work.

  7. Safety of Nuclear Power Plants: Commissioning and Operation. Specific Safety Requirements (French Edition)

    International Nuclear Information System (INIS)

    2016-01-01

    This publication describes the requirements to be met to ensure the safe operation of nuclear power plants. It takes into account developments in areas such as long term operation of nuclear power plants, plant ageing, periodic safety review, probabilistic safety analysis and risk informed decision making processes. In addition, the requirements are governed by, and must apply, the safety objective and safety principles that are established in the IAEA Safety Standards Series No. SF-1, Fundamental Safety Principles. A review of Safety Requirements publications was commenced in 2011 following the accident in the Fukushima Daiichi nuclear power plant in Japan. The review revealed no significant areas of weakness and resulted in just a small set of amendments to strengthen the requirements and facilitate their implementation, which are contained in the present publication.

  8. SfDronc, an initiator caspase involved in apoptosis in the fall armyworm Spodoptera frugiperda.

    Science.gov (United States)

    Huang, Ning; Civciristov, Srgjan; Hawkins, Christine J; Clem, Rollie J

    2013-05-01

    Initiator caspases are the first caspases that are activated following an apoptotic stimulus, and are responsible for cleaving and activating downstream effector caspases, which directly cause apoptosis. We have cloned a cDNA encoding an ortholog of the initiator caspase Dronc in the lepidopteran insect Spodoptera frugiperda. The SfDronc cDNA encodes a predicted protein of 447 amino acids with a molecular weight of 51 kDa. Overexpression of SfDronc induced apoptosis in Sf9 cells, while partial silencing of SfDronc expression in Sf9 cells reduced apoptosis induced by baculovirus infection or by treatment with UV or actinomycin D. Recombinant SfDronc exhibited several expected biochemical characteristics of an apoptotic initiator caspase: 1) SfDronc efficiently cleaved synthetic initiator caspase substrates, but had very little activity against effector caspase substrates; 2) mutation of a predicted cleavage site at position D340 blocked autoprocessing of recombinant SfDronc and reduced enzyme activity by approximately 10-fold; 3) SfDronc cleaved the effector caspase Sf-caspase-1 at the expected cleavage site, resulting in Sf-caspase-1 activation; and 4) SfDronc was strongly inhibited by the baculovirus caspase inhibitor SpliP49, but not by the related protein AcP35. These results indicate that SfDronc is an initiator caspase involved in caspase-dependent apoptosis in S. frugiperda, and as such is likely to be responsible for the initiator caspase activity in S. frugiperda cells known as Sf-caspase-X. Copyright © 2013 Elsevier Ltd. All rights reserved.

  9. Activation of SF1 Neurons in the Ventromedial Hypothalamus by DREADD Technology Increases Insulin Sensitivity in Peripheral Tissues.

    Science.gov (United States)

    Coutinho, Eulalia A; Okamoto, Shiki; Ishikawa, Ayako Wendy; Yokota, Shigefumi; Wada, Nobuhiro; Hirabayashi, Takahiro; Saito, Kumiko; Sato, Tatsuya; Takagi, Kazuyo; Wang, Chen-Chi; Kobayashi, Kenta; Ogawa, Yoshihiro; Shioda, Seiji; Yoshimura, Yumiko; Minokoshi, Yasuhiko

    2017-09-01

    The ventromedial hypothalamus (VMH) regulates glucose and energy metabolism in mammals. Optogenetic stimulation of VMH neurons that express steroidogenic factor 1 (SF1) induces hyperglycemia. However, leptin acting via the VMH stimulates whole-body glucose utilization and insulin sensitivity in some peripheral tissues, and this effect of leptin appears to be mediated by SF1 neurons. We examined the effects of activation of SF1 neurons with DREADD (designer receptors exclusively activated by designer drugs) technology. Activation of SF1 neurons by an intraperitoneal injection of clozapine- N -oxide (CNO), a specific hM3Dq ligand, reduced food intake and increased energy expenditure in mice expressing hM3Dq in SF1 neurons. It also increased whole-body glucose utilization and glucose uptake in red-type skeletal muscle, heart, and interscapular brown adipose tissue, as well as glucose production and glycogen phosphorylase a activity in the liver, thereby maintaining blood glucose levels. During hyperinsulinemic-euglycemic clamp, such activation of SF1 neurons increased insulin-induced glucose uptake in the same peripheral tissues and tended to enhance insulin-induced suppression of glucose production by suppressing gluconeogenic gene expression and glycogen phosphorylase a activity in the liver. DREADD technology is thus an important tool for studies of the role of the brain in the regulation of insulin sensitivity in peripheral tissues. © 2017 by the American Diabetes Association.

  10. Fundamental Safety Principles

    International Nuclear Information System (INIS)

    Abdelmalik, W.E.Y.

    2011-01-01

    This work presents a summary of the IAEA Safety Standards Series publication No. SF-1 entitled F UDAMENTAL Safety PRINCIPLES p ublished on 2006. This publication states the fundamental safety objective and ten associated safety principles, and briefly describes their intent and purposes. Safety measures and security measures have in common the aim of protecting human life and health and the environment. These safety principles are: 1) Responsibility for safety, 2) Role of the government, 3) Leadership and management for safety, 4) Justification of facilities and activities, 5) Optimization of protection, 6) Limitation of risks to individuals, 7) Protection of present and future generations, 8) Prevention of accidents, 9)Emergency preparedness and response and 10) Protective action to reduce existing or unregulated radiation risks. The safety principles concern the security of facilities and activities to the extent that they apply to measures that contribute to both safety and security. Safety measures and security measures must be designed and implemented in an integrated manner so that security measures do not compromise safety and safety measures do not compromise security.

  11. National report of the Slovak Republic. Compiled in terms of the joint convention on the safety of spent fuel management and on the safety of radioactive waste management. April 2003

    International Nuclear Information System (INIS)

    Burclova, J.; Ivan, J.; Jurina, V.

    2003-04-01

    A brief national safety report of the Slovak Republic in 2003 is presented. A account of activities carried out by the Nuclear Regulatory Authority of the Slovak Republic (UJD) is presented. These activities are reported under the headings: (A) Introduction; (B) Policies and practices; (C) Scope of application; (D) Inventories and lists; (E) Legislation and regulation; (F) Other general safety provisions; (G) Safety of spent fuel management; (H) Safety of radioactive waste management; (I) Transboundary movement; (J) Disused sealed sources; (K) Planned activities to improve safety; (L) Annexes: (I and II) List of SF and RAW management nuclear facilities; (III) List of nuclear facilities subject to decommissioning; (IV) Inventory of stored SF (t HM); (V) Inventory of disposed of and stored RAW; (VI) List of selected national laws, regulations and guidelines; (VII) List of international expert reports and safety analysis reports; (VIII) List of authors

  12. National report of the Slovak Republic. Compiled in terms of the joint convention on the safety of spent fuel management and on the safety of radioactive waste management. April 2003

    Energy Technology Data Exchange (ETDEWEB)

    Burclova, J [Nuclear Regulatory Authority of the Slovak Republic, Bratislava (Slovakia); Ivan, J [Slovenske elektrarne, a.s., Bratislava (Slovakia); Jurina, V [Health Ministry of the Slovak Republic, Bratislava (Slovakia); and others

    2003-04-01

    A brief national safety report of the Slovak Republic in 2003 is presented. A account of activities carried out by the Nuclear Regulatory Authority of the Slovak Republic (UJD) is presented. These activities are reported under the headings: (A) Introduction; (B) Policies and practices; (C) Scope of application; (D) Inventories and lists; (E) Legislation and regulation; (F) Other general safety provisions; (G) Safety of spent fuel management; (H) Safety of radioactive waste management; (I) Transboundary movement; (J) Disused sealed sources; (K) Planned activities to improve safety; (L) Annexes: (I and II) List of SF and RAW management nuclear facilities; (III) List of nuclear facilities subject to decommissioning; (IV) Inventory of stored SF (t HM); (V) Inventory of disposed of and stored RAW; (VI) List of selected national laws, regulations and guidelines; (VII) List of international expert reports and safety analysis reports; (VIII) List of authors.

  13. Psychometric Evaluation of a Coping Strategies Inventory Short-Form (CSI-SF in the Jackson Heart Study Cohort

    Directory of Open Access Journals (Sweden)

    Herman Taylor

    2007-12-01

    Full Text Available This study sought to establish the psychometric properties of a Coping Strategies Inventory Short Form (CSISF by examining coping skills in the Jackson Heart Study cohort. We used exploratory and confirmatory factor analysis, Pearson’s correlation, and Cronbach Alpha to examine reliability and validity in the CSI-SF that solicited responses from 5302 African American men and women between the ages of 35 and 84. One item was dropped from the 16-item CSI-SF, making it a 15-item survey. No significant effects were found for age and gender, strengthening the generalizability of the CSI-SF. The internal consistency reliability analysis revealed reliability between alpha = 0.58-0.72 for all of the scales, and all of the fit indices used to examine the CSI-SF provided support for its use as an adequate measure of coping. This study provides empirical support for utilizing this instrument in future efforts to understand the role of coping in moderating health outcomes.

  14. Partial Safety Factors and Target Reliability Level in Danish Structural Codes

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Hansen, J. O.; Nielsen, T. A.

    2001-01-01

    The partial safety factors in the newly revised Danish structural codes have been derived using a reliability-based calibration. The calibrated partial safety factors result in the same average reliability level as in the previous codes, but a much more uniform reliability level has been obtained....... The paper describes the code format, the stochastic models and the resulting optimised partial safety factors....

  15. Factors Contribute to Safety Culture in the Manufacturing Industry in Malaysia

    OpenAIRE

    Ong Choon Hee

    2014-01-01

    The purpose of this paper is to explain the role of safety culture in the manufacturing industry in Malaysia and identify factors contribute to safety culture. It is suggested in this study that leadership support, management commitment and safety management system are important factors that contribute to safety culture. This study also provides theoretical implications to guide future research and offers practical implications to the managers in the development of safety culture. Given that ...

  16. Quality of life among Iranian patients with beta-thalassemia major using the SF-36 questionnaire

    Directory of Open Access Journals (Sweden)

    Sezaneh Haghpanah

    Full Text Available CONTEXT AND OBJECTIVE Patients with beta-thalassemia major (β-TM experience physical, psychological and social problems that lead to decreased quality of life (QoL. The aim here was to measure health-related QoL and its determinants among patients with β-TM, using the Short Form-36 (SF-36 questionnaire. DESIGN AND SETTING Cross-sectional study at the Hematology Research Center of Shiraz University of Medical Sciences, in southern Iran. METHODS One hundred and one patients with β-TM were randomly selected. After the participants' demographics and disease characteristics had been recorded, they were asked to fill out the SF-36 questionnaire. The correlations of clinical and demographic factors with the QoL score were evaluated. RESULTS There were 44 men and 57 women of mean age 19.52 ± 4.3 years (range 12-38. On two scales, pain (P = 0.041 and emotional role (P = 0.009, the women showed significantly lower scores than the men. Lower income, poor compliance with iron-chelating therapy and presence of comorbidities were significantly correlated with lower SF-36 scores. These factors were also found to be determinants of worse SF-36 scores in multivariate analysis. CONCLUSIONS We showed that the presence of disease complications, poor compliance with iron-chelating therapy and poor economic status were predictors of worse QoL among patients with β-TM. Prevention and proper management of disease-related complications, increased knowledge among patients regarding the importance of managing comorbidities and greater compliance with iron-chelating therapy, along with psychosocial and financial support, could help these patients to cope better with this chronic disease state.

  17. Efficient removal of sulfur hexafluoride (SF6) through reacting with recycled electroplating sludge.

    Science.gov (United States)

    Zhang, Jia; Zhou, Ji Zhi; Liu, Qiang; Qian, Guangren; Xu, Zhi Ping

    2013-06-18

    This paper reports that recycled electroplating sludge is able to efficiently remove greenhouse gas sulfur hexafluoride (SF6). The removal process involves various reactions of SF6 with the recycled sludge. Remarkably, the sludge completely removed SF6 at a capacity of 1.10 mmol/g (SF6/sludge) at 600 °C. More importantly, the evolved gases were SO2, SiF4, and a limited amount of HF, with no toxic SOF4, SO2F2, or SF4 being detected. These generated gases can be readily captured and removed by NaOH solution. The reacted solids were further found to be various metal fluorides, thus revealing that SF6 removal takes place by reacting with various metal oxides and silicate in the sludge. Moreover, the kinetic investigation revealed that the SF6 reaction with the sludge is a first-order chemically controlled process. This research thus demonstrates that the waste electroplating sludge can be potentially used as an effective removal agent for one of the notorious greenhouse gases, SF6.

  18. Assessment of the factors with significant influence on safety culture

    International Nuclear Information System (INIS)

    Farcasiu, M.; Nitoi, M.

    2013-01-01

    In this paper, a qualitative and a quantitative evaluation of the factors with significant impact on safety culture were performed. These techniques were established and applied in accordance with IAEA standards. In order to show the applicability and opportunity of the methodology a specific case study was prepared: safety culture evaluation for INR Pitesti. The qualitative evaluation was performed using specific developed questionnaires. Through analysis of the completed questionnaires was established the development stage of safety culture at INR. The quantitative evaluation was performed using a guide to rate the influence factors. For each factor was identified the influence (negative or positive) and ranking score was estimated using scoring criteria. The results have emphasized safety culture stages. The paper demonstrates the fact that using both quantitative and qualitative assessment techniques, a practical value of the safety culture concept is given. (authors)

  19. Validation of the SF-6D Health State Utilities Measure in Lower Extremity Sarcoma

    Directory of Open Access Journals (Sweden)

    Kenneth R. Gundle

    2014-01-01

    Full Text Available Aim. Health state utilities measures are preference-weighted patient-reported outcome (PRO instruments that facilitate comparative effectiveness research. One such measure, the SF-6D, is generated from the Short Form 36 (SF-36. This report describes a psychometric evaluation of the SF-6D in a cross-sectional population of lower extremity sarcoma patients. Methods. Patients with lower extremity sarcoma from a prospective database who had completed the SF-36 and Toronto Extremity Salvage Score (TESS were eligible for inclusion. Computed SF-6D health states were given preference weights based on a prior valuation. The primary outcome was correlation between the SF-6D and TESS. Results. In 63 pairs of surveys in a lower extremity sarcoma population, the mean preference-weighted SF-6D score was 0.59 (95% CI 0.4–0.81. The distribution of SF-6D scores approximated a normal curve (skewness = 0.11. There was a positive correlation between the SF-6D and TESS (r=0.75, P<0.01. Respondents who reported walking aid use had lower SF-6D scores (0.53 versus 0.61, P=0.03. Five respondents underwent amputation, with lower SF-6D scores that approached significance (0.48 versus 0.6, P=0.06. Conclusions. The SF-6D health state utilities measure demonstrated convergent validity without evidence of ceiling or floor effects. The SF-6D is a health state utilities measure suitable for further research in sarcoma patients.

  20. Research on technology of online gas chromatograph for SF6 decomposition products

    Science.gov (United States)

    Li, L.; Fan, X. P.; Zhou, Y. Y.; Tang, N.; Zou, Z. L.; Liu, M. Z.; Huang, G. J.

    2017-12-01

    Sulfur hexafluoride (SF6) decomposition products were qualitatively and quantitatively analyzed by several gas chromatographs in the laboratory. Test conditions and methods were selected and optimized to minimize and eliminate the SF6’ influences on detection of other trace components. The effective separation and detection of selected characteristic gases were achieved. And by comparison among different types of gas chromatograph, it was found that GPTR-S101 can effectively separate and detect SF6 decomposition products and has best the best detection limit and sensitivity. On the basis of GPTR-S101, online gas chromatograph for SF6decomposition products (GPTR-S201) was developed. It lays the foundation for further online monitoring and diagnosis of SF6.

  1. TRAC-PF1/MOD 1 independent assessment: Semiscale MOD-2A feedwater-line break (S-SF-3) and steam-line break (S-SF-5) tests

    International Nuclear Information System (INIS)

    Dobranich, D.

    1985-11-01

    The TRAC-PF1/MOD1 independent assessment project at Sandia is part of an overall effort funded by the NRC to determine the ability of various systems codes to predict the detailed thermal/hydraulic response of LWRs during accident and off-normal conditions. As part of this effort, calculations for Semiscale Mod-2A test S-SF-3, a feedwater-line break test, and S-SF-5, a steam-line break test, were performed with TRAC-PF1/MOD1. Most aspects of both the S-SF-3 and S-SF-5 steady-state calculations were found to be in good agreement with data. However, the need for a better steam separator model was identified from the S-SF-3 calculation. Overall, the qualitative behavior of both transients was calculated reasonably well; however, there were some discrepancies in the prediction of the quantitative behavior. The results for the S-SF-3 transient calculation indicate that the primary-to-secondary heat transfer degradation began too early. This was possibly due to overprediction of entrainment in the steam generator boiler, leading to an incorrect calculation of the secondary-side fluid distribution during the steady state. However, there was insufficient data to verify this. Results for the S-SF-5 transient calculation indicate that the primary-side fluid temperature response to a steam-line break was in reasonable agreement with data but the pressure response did not coincide with the data. Uncertainties in the data are sufficient to prevent us from determining the exact cause of this discrepancy, but there is indirect evidence that the calculated rate of phase change in the pressurizer was incorrect. 16 refs., 73 figs., 13 tabs

  2. Study on SF6 trace experiment in Lianyungang Nuclear Power Plant

    International Nuclear Information System (INIS)

    Hu Erbang; Yan Jiangyu; Zhang Yongyi; Wen Lianzhong

    2001-01-01

    10 times SF 6 trace experiments were successfully performed in August 1997 on a very complex terrain of Lianyungang Nuclear Power Plant in order to obtain plume trajectory and diffusion parameters. SF 6 is released from the top of a tower of 100 m. The sample points are arranged not only on the sample lines but also on the areas near residences. About 50 samples are obtained in each SF 6 trace experiment. The samples of SF 6 are analysed by the GC-ECD method. The weather stability is 5 times C and D stabilities respectively if using P-G method or 10 times D stabilities if using ΔT-U method. A least-square method is adopted to obtain the diffusion parameters from diffusion equation. Meanwhile the effect on the diffusion parameters from sampling time is measured based on the above SF 6 trace experiment

  3. Pod-1/Capsulin shows a sex- and stage-dependent expression pattern in the mouse gonad development and represses expression of Ad4BP/SF-1.

    Science.gov (United States)

    Tamura, M; Kanno, Y; Chuma, S; Saito, T; Nakatsuji, N

    2001-04-01

    Mammalian sex-determination and differentiation are controlled by several genes, such as Sry, Sox-9, Dax-1 and Mullerian inhibiting substance (MIS), but their upstream and downstream genes are largely unknown. Ad4BP/SF-1, encoding a zinc finger transcription factor, plays important roles in gonadogenesis. Disruption of this gene caused disappearance of the urogenital system including the gonad. Ad4BP/SF-1, however, is also involved in the sex differentiation of the gonad at later stages, such as the regulation of steroid hormones and MIS. Pod-1/Capsulin, a member of basic helix-loop-helix transcription factors, is expressed in a pattern closely related but mostly complimentary to that of the Ad4BP/SF-1 expression in the developing gonad. In the co-transfection experiment using cultured cells, overexpression of Pod-1/Capsulin repressed expression of a reporter gene that carried the upstream regulatory region of the Ad4BP/SF-1 gene. Furthermore, forced expression of Pod-1/Capsulin repressed expression of Ad4BP/SF-1 in the Leydig cell-derived I-10 cells. These results suggest that Pod-1/Capsulin may play important roles in the development and sex differentiation of the mammalian gonad via transcriptional regulation of Ad4BP/SF-1.

  4. A meta-analytic review of measurement equivalence study findings of the SF-36® and SF-12® Health Surveys across electronic modes compared to paper administration.

    Science.gov (United States)

    White, Michelle K; Maher, Stephen M; Rizio, Avery A; Bjorner, Jakob B

    2018-04-16

    Patient-reported outcome (PRO) measures originally developed for paper administration are increasingly being administered electronically in clinical trials and other health research studies. Three published meta-analyses of measurement equivalence among paper and electronic modes aggregated findings across hundreds of PROs, but there has not been a similar meta-analysis that addresses a single PRO, partly because there are not enough published measurement equivalence studies using the same PRO. Because the SF-36 (R) Health Survey (SF-36) is a widely used PRO, the aim of this study was to conduct a meta-analysis of measurement equivalence studies of this survey. A literature search of several medical databases used search terms for variations of "SF-36" or "SF-12" and "equivalence" in the title or abstract of English language publications. The eight scale scores and two summary measures of the SF-36 and SF-12 were transformed to norm-based scores (NBS) using developer guidelines. A threshold of within ± 2 NBS points was set as the margin of equivalence. Comprehensive meta-analysis software was used. Twenty-five studies were included in the meta-analysis. Results indicated that mean differences across domains and summary scores ranged from 0.01 to 0.39 while estimates of agreement ranged from 0.76 to 0.91, all well within the equivalence threshold. Moderator analyses showed that time between administration, survey language, and type of electronic device did not influence equivalence. The results of the meta-analysis support equivalence of paper-based and electronic versions of the SF-36 and SF-12 across a variety of disease populations, countries, and electronic modes.

  5. Self-focusing in SF6

    International Nuclear Information System (INIS)

    Ackerhalt, J.R.; Galbraith, H.W.

    1981-01-01

    It is shown by explicit calculation of previously published quasicontinuum model that the molecular susceptibility rapidly approaches zero as higher excited states of the molecule become populated. Hence the overtones of the ν 3 -pumped mode are totally responsible for the self focusing effects in SF 6 . The ν 3 ladder contribution to the susceptibility is calculated. The vibrational model is a classical triply degenerate anharmonic oscillator in the Cartesian basis with the anharmonicity parameters chosen to be consistent with the latest spectroscopic analysis of the 3ν 3 overtone spectrum. The rotational structure is represented by a distribution of these oscillators where the distribution is chosen to correspond to the spectrum of the ν 3 fundamental. Good agreement is found with the 300 0 in self-focusing data of Nowak and Ham at CO 2 P(28), P(20) and P(10) in SF 6

  6. Wnt signaling in ovarian development inhibits Sf1 activation of Sox9 via the Tesco enhancer.

    Science.gov (United States)

    Bernard, Pascal; Ryan, Janelle; Sim, Helena; Czech, Daniel P; Sinclair, Andrew H; Koopman, Peter; Harley, Vincent R

    2012-02-01

    Genome analysis of patients with disorders of sex development, and gain- and loss-of-function studies in mice indicate that gonadal development is regulated by opposing signals. In females, the Wnt/β-catenin canonical pathway blocks testicular differentiation by repressing the expression of the Sertoli cell-specific gene Sox9 by an unknown mechanism. Using cell and embryonic gonad culture models, we show that activation of the Wnt/β-catenin pathway inhibits the expression of Sox9 and Amh, whereas mRNA and protein levels of Sry and steroidogenic factor 1 (Sf1), two key transcriptional regulators of Sox9, are not altered. Ectopic activation of Wnt/β-catenin signaling in male gonads led to a loss of Sf1 binding to the Tesco enhancer and absent Sox9 expression that we also observed in wild-type ovaries. Moreover, ectopic Wnt/β-catenin signaling induced the expression of the female somatic cell markers, Bmp2 and Rspo1, as a likely consequence of Sox9 loss. Wnt/β-catenin signaling in XY gonads did not, however, affect gene expression of the steroidogenic Leydig cell Sf1 target gene, Cyp11a1, or Sf1 binding to the Cyp11a1 promoter. Our data support a model in ovary development whereby activation of β-catenin prevents Sf1 binding to the Sox9 enhancer, thereby inhibiting Sox9 expression and Sertoli cell differentiation.

  7. Improving Safety through Human Factors Engineering.

    Science.gov (United States)

    Siewert, Bettina; Hochman, Mary G

    2015-10-01

    Human factors engineering (HFE) focuses on the design and analysis of interactive systems that involve people, technical equipment, and work environment. HFE is informed by knowledge of human characteristics. It complements existing patient safety efforts by specifically taking into consideration that, as humans, frontline staff will inevitably make mistakes. Therefore, the systems with which they interact should be designed for the anticipation and mitigation of human errors. The goal of HFE is to optimize the interaction of humans with their work environment and technical equipment to maximize safety and efficiency. Special safeguards include usability testing, standardization of processes, and use of checklists and forcing functions. However, the effectiveness of the safety program and resiliency of the organization depend on timely reporting of all safety events independent of patient harm, including perceived potential risks, bad outcomes that occur even when proper protocols have been followed, and episodes of "improvisation" when formal guidelines are found not to exist. Therefore, an institution must adopt a robust culture of safety, where the focus is shifted from blaming individuals for errors to preventing future errors, and where barriers to speaking up-including barriers introduced by steep authority gradients-are minimized. This requires creation of formal guidelines to address safety concerns, establishment of unified teams with open communication and shared responsibility for patient safety, and education of managers and senior physicians to perceive the reporting of safety concerns as a benefit rather than a threat. © RSNA, 2015.

  8. Short Form of Weinstein Noise Sensitivity Scale (NSS-SF): Reliability, Validity and Gender Invariance among Chinese Individuals.

    Science.gov (United States)

    Zhong, Tao; Chung, Pak-Kwong; Liu, Jing Dong

    2018-02-01

    Independent from noise exposure, noise sensitivity plays a pivotal role in people's noise annoyance perception and concomitant health deteriorations. The present study empirically investigated the psychometric properties of the Chinese version of the Weinstein Noise Sensitivity Scale-Short Form (CNSS-SF), the widely used inventory measuring individual differences in noise perception. In total, 373 Chinese participants (age = 21.41 ± 3.36) completed the online, anonymous questionnaire package. Examination of the CNSS-SF's reliability (internal consistency), factorial validity through validation and cross-validation, nomological validity and measurement invariance across gender groups were undertaken. The Cronbach alpha coefficients and composite reliabilities indicated sufficient reliability of the CNSS-SF. Two confirmatory factor analyses (CFA), in two randomly partitioned groups of participants, substantiated the factorial validity of the scale. The nomological validity of the scale was also corroborated by the significant positive association of its score with the trait anxiety score. Measurement invariance of the CNSS-SF was also found across genders via multi-group CFA. Though not without limitations, findings from the present research provide promising evidence for the utility of the scale in measuring noise sensitivity among the Chinese population. The availability of the CNSS-SF can promote research related to environmental noise and health in China, as well as facilitate cross-cultural comparisons. Copyright © 2018 The Editorial Board of Biomedical and Environmental Sciences. Published by China CDC. All rights reserved.

  9. Electrochemical and Infrared Absorption Spectroscopy Detection of SF6 Decomposition Products

    OpenAIRE

    Dong, Ming; Zhang, Chongxing; Ren, Ming; Albarracín, Ricardo; Ye, Rixin

    2017-01-01

    Sulfur hexafluoride (SF6) gas-insulated electrical equipment is widely used in high-voltage (HV) and extra-high-voltage (EHV) power systems. Partial discharge (PD) and local heating can occur in the electrical equipment because of insulation faults, which results in SF6 decomposition and ultimately generates several types of decomposition products. These SF6 decomposition products can be qualitatively and quantitatively detected with relevant detection methods, and such detection contributes ...

  10. Design of Vertical Wall Caisson Breakwaters using Partial Safety Factors

    DEFF Research Database (Denmark)

    Burcharth, H. F.; Sørensen, John Dalsgaard

    1999-01-01

    The paper presents a new system for implementation of target reliability in caisson breakwater designs by means of partial safety factors. The development of the system is explained, and tables of partial safety factors are presented for important overall stability failure modes related to caisson...

  11. Advances in high voltage insulation and arc interruption in SF6 and vacuum

    CERN Document Server

    Maller, V N

    1982-01-01

    Advances in High Voltage Insulation and Arc Interruption in SF6 and Vacuum deals with high voltage breakdown and arc extinction in sulfur hexafluoride (SF6) and high vacuum, with special emphasis on the application of these insulating media in high voltage power apparatus and devices. The design and developmental aspects of various high voltage power apparatus using SF6 and high vacuum are highlighted. This book is comprised of eight chapters and opens with a discussion on electrical discharges in SF6 and high vacuum, along with the properties and handling of SF6 gas. The following chapters fo

  12. The greenhouse gases HFCs, PFCs and SF{sub 6}, Danish consumption and emissions, 2007

    Energy Technology Data Exchange (ETDEWEB)

    Sander Poulsen, T.; Bode, I.

    2009-07-01

    The objective of this project was to determine the Danish consumption and actual emissions of HFCs, PFCs, and SF{sub 6} for 2007. Further, if methodology changes are made in connection to the work on 2007 data, the data for previous years are considered and updated accordingly. The emission calculation is made in accordance with the IPCC guidelines and following the method employed in previous year calculation. The methodology includes calculation of the actual emissions of HFCs, PFCs, and SF{sub 6}. In this calculation of actual emissions, the release from stock of greenhouse gases in products has been taken into account, and adjustments have been made for imports and exports of the greenhouse gases in products. Specific emission factors are presented. (ln)

  13. Psychometric Properties and Structural Validity of the Short Version of the Personality Beliefs Questionnaire (PBQ-SF

    Directory of Open Access Journals (Sweden)

    Rubén Darío Manrique Hernández

    2016-06-01

    Full Text Available The Personality Belief Questionnaire- Short Form (PBQ-SF is an assessment instrument of personality beliefs based on the cognitive theory that states that these are characterized by a specific pattern of dysfunctional thoughts. The objective of this study was to establish the psychometric properties and structural validity of the PBQ-SF questionnaire in Colombian adults from 18 to 35 years old. To carry out the above and with permission of the author the validation process was initiated following a thorough and rigorous process that led to a final version of the PBQ-SF applied to 1423 persons born in Colombia and living in nine Colombian cities. Analysis of internal consistency among the items (Cronbach´s alpha, confirmatory factor analysis and calculus of goodness of fit estimators were performed. It was found that the Internal consistency of the domains varied from 0,65 for avoidant disorder up to 0,83 for paranoid disorder.

  14. Camera system considerations for geomorphic applications of SfM photogrammetry

    Science.gov (United States)

    Mosbrucker, Adam; Major, Jon J.; Spicer, Kurt R.; Pitlick, John

    2017-01-01

    The availability of high-resolution, multi-temporal, remotely sensed topographic data is revolutionizing geomorphic analysis. Three-dimensional topographic point measurements acquired from structure-from-motion (SfM) photogrammetry have been shown to be highly accurate and cost-effective compared to laser-based alternatives in some environments. Use of consumer-grade digital cameras to generate terrain models and derivatives is becoming prevalent within the geomorphic community despite the details of these instruments being largely overlooked in current SfM literature. This article is protected by copyright. All rights reserved.A practical discussion of camera system selection, configuration, and image acquisition is presented. The hypothesis that optimizing source imagery can increase digital terrain model (DTM) accuracy is tested by evaluating accuracies of four SfM datasets conducted over multiple years of a gravel bed river floodplain using independent ground check points with the purpose of comparing morphological sediment budgets computed from SfM- and lidar-derived DTMs. Case study results are compared to existing SfM validation studies in an attempt to deconstruct the principle components of an SfM error budget. This article is protected by copyright. All rights reserved.Greater information capacity of source imagery was found to increase pixel matching quality, which produced 8 times greater point density and 6 times greater accuracy. When propagated through volumetric change analysis, individual DTM accuracy (6–37 cm) was sufficient to detect moderate geomorphic change (order 100,000 m3) on an unvegetated fluvial surface; change detection determined from repeat lidar and SfM surveys differed by about 10%. Simple camera selection criteria increased accuracy by 64%; configuration settings or image post-processing techniques increased point density by 5–25% and decreased processing time by 10–30%. This article is protected by copyright. All rights

  15. Transcriptomic analysis of short-fruit 1 (sf1) reveals new insights into the variation of fruit-related traits in Cucumis sativus.

    Science.gov (United States)

    Wang, Lina; Cao, Chenxing; Zheng, Shuangshuang; Zhang, Haiyang; Liu, Panjing; Ge, Qian; Li, Jinrui; Ren, Zhonghai

    2017-06-07

    Fruit size is an important quality trait in different market classes of Cucumis sativus L., an economically important vegetable cultivated worldwide, but the genetic and molecular mechanisms that control fruit size are largely unknown. In this study, we isolated a natural cucumber mutant, short fruit 1 (sf1), caused by a single recessive Mendelian factor, from the North China-type inbred line CNS2. In addition to significantly decreased fruit length, other fruit-related phenotypic variations were also observed in sf1 compared to the wild-type (WT) phenotype, indicating that sf1 might have pleiotropic effects. Microscopic imaging showed that fruit cell size in sf1 was much larger than that in WT, suggesting that the short fruit phenotype in sf1 is caused by decreased cell number. Fine mapping revealed that sf1 was localized to a 174.3 kb region on chromosome 6. Similarly, SNP association analysis of bulked segregant RNA-Seq data showed increased SNP frequency in the same region of chromosome 6. In addition, transcriptomic analysis revealed that sf1 might control fruit length through the fine-tuning of cytokinin and auxin signalling, gibberellin biosynthesis and signal transduction in cucumber fruits. Overall, our results provide important information for further study of fruit length and other fruit-related features in cucumber.

  16. Complete study demonstrating the absence of rhabdovirus in a distinct Sf9 cell line.

    Directory of Open Access Journals (Sweden)

    Yoshifumi Hashimoto

    Full Text Available A putative novel rhabdovirus (SfRV was previously identified in a Spodoptera frugiperda cell line (Sf9 cells [ATCC CRL-1711 lot 58078522] by next generation sequencing and extensive bioinformatic analysis. We performed an extensive analysis of our Sf9 cell bank (ATCC CRL-1711 lot 5814 [Sf9L5814] to determine whether this virus was already present in cells obtained from ATCC in 1987. Inverse PCR of DNA isolated from Sf9 L5814 cellular DNA revealed integration of SfRV sequences in the cellular genome. RT-PCR of total RNA showed a deletion of 320 nucleotides in the SfRV RNA that includes the transcriptional motifs for genes X and L. Concentrated cell culture supernatant was analyzed by sucrose density gradient centrifugation and revealed a single band at a density of 1.14 g/ml. This fraction was further analysed by electron microscopy and showed amorphous and particulate debris that did not resemble a rhabdovirus in morphology or size. SDS-PAGE analysis confirmed that the protein composition did not contain the typical five rhabdovirus structural proteins and LC-MS/MS analysis revealed primarily of exosomal marker proteins, the SfRV N protein, and truncated forms of SfRV N, P, and G proteins. The SfRV L gene fragment RNA sequence was recovered from the supernatant after ultracentrifugation of the 1.14 g/ml fraction treated with diethyl ether suggesting that the SfRV L gene fragment sequence is not associated with a diethyl ether resistant nucleocapsid. Interestingly, the 1.14 g/ml fraction was able to transfer baculovirus DNA into Sf9L5814 cells, consistent with the presence of functional exosomes. Our results demonstrate the absence of viral particles in ATCC CRL-1711 lot 5814 Sf9 cells in contrast to a previous study that suggested the presence of infectious rhabdoviral particles in Sf9 cells from a different lot. This study highlights how cell lines with different lineages may present different virosomes and therefore no general conclusions can

  17. The isotope separator on-line at the INS-SF cyclotron

    International Nuclear Information System (INIS)

    Yonehara, H.; Kawakami, H.; Tanaka, J.; Omata, K.; Shida, Y.

    1981-02-01

    The Isotope Separator On-Line at the SF Cyclotron has been improved. Some details of improvements are described on the target-ion source, rapid extraction with aluminized tape, tape transport system and data aquisition. The performance of the improved SF-ISOL is discussed. (author)

  18. Laser Spectroscopy on Ozone Destruction by SF6 Decomposed Products

    OpenAIRE

    北嶋, 巌; 村上, 和幸; 田中, 淳一; 岡井, 善四郎

    2002-01-01

    This paper reports on the identification of the SF6 decomposed products and the possibility of the ozone destruction by it. SF6 gas absorbs very strongly the 10.6μm P branch of C02 laser beam,so that the trace detection under ppb will be easily performed by the laser photo-acoustic method. We observed a new absorption spectra within the 9.6μm P branch resulted from the decomposed molecules after 2 hours 1 Hz-pulsed discharge of SF6 gas. As a resu1t ofthe gas chromatograph, it will be assumed ...

  19. Ground-based FTIR retrievals of SF6 on Reunion Island

    Directory of Open Access Journals (Sweden)

    M. Zhou

    2018-02-01

    Full Text Available SF6 total columns were successfully retrieved from FTIR (Fourier transform infrared measurements (Saint Denis and Maïdo on Reunion Island (21° S, 55° E between 2004 and 2016 using the SFIT4 algorithm: the retrieval strategy and the error budget were presented. The FTIR SF6 retrieval has independent information in only one individual layer, covering the whole of the troposphere and the lower stratosphere. The trend in SF6 was analysed based on the FTIR-retrieved dry-air column-averaged mole fractions (XSF6 on Reunion Island, the in situ measurements at America Samoa (SMO and the collocated satellite measurements (Michelson Interferometer for Passive Atmospheric Sounding, MIPAS, and Atmospheric Chemistry Experiment Fourier Transform Spectrometer, ACE-FTS in the southern tropics. The SF6 annual growth rate from FTIR retrievals is 0.265 ± 0.013 pptv year−1 for 2004–2016, which is slightly weaker than that from the SMO in situ measurements (0.285 ± 0.002 pptv year−1 for the same time period. The SF6 trend in the troposphere from MIPAS and ACE-FTS observations is also close to the ones from the FTIR retrievals and the SMO in situ measurements.

  20. Ground-based FTIR retrievals of SF6 on Reunion Island

    Science.gov (United States)

    Zhou, Minqiang; Langerock, Bavo; Vigouroux, Corinne; Wang, Pucai; Hermans, Christian; Stiller, Gabriele; Walker, Kaley A.; Dutton, Geoff; Mahieu, Emmanuel; De Mazière, Martine

    2018-02-01

    SF6 total columns were successfully retrieved from FTIR (Fourier transform infrared) measurements (Saint Denis and Maïdo) on Reunion Island (21° S, 55° E) between 2004 and 2016 using the SFIT4 algorithm: the retrieval strategy and the error budget were presented. The FTIR SF6 retrieval has independent information in only one individual layer, covering the whole of the troposphere and the lower stratosphere. The trend in SF6 was analysed based on the FTIR-retrieved dry-air column-averaged mole fractions (XSF6) on Reunion Island, the in situ measurements at America Samoa (SMO) and the collocated satellite measurements (Michelson Interferometer for Passive Atmospheric Sounding, MIPAS, and Atmospheric Chemistry Experiment Fourier Transform Spectrometer, ACE-FTS) in the southern tropics. The SF6 annual growth rate from FTIR retrievals is 0.265 ± 0.013 pptv year-1 for 2004-2016, which is slightly weaker than that from the SMO in situ measurements (0.285 ± 0.002 pptv year-1) for the same time period. The SF6 trend in the troposphere from MIPAS and ACE-FTS observations is also close to the ones from the FTIR retrievals and the SMO in situ measurements.

  1. Modelling of safety barriers including human and organisational factors to improve process safety

    DEFF Research Database (Denmark)

    Markert, Frank; Duijm, Nijs Jan; Thommesen, Jacob

    2013-01-01

    It is believed that traditional safety management needs to be improved on the aspect of preparedness for coping with expected and unexpected deviations, avoiding an overly optimistic reliance on safety systems. Remembering recent major accidents, such as the Deep Water Horizon, the Texas City....... A valuable approach is the inclusion of human and organisational factors into the simulation of the reliability of the technical system using event trees and fault trees and the concept of safety barriers. This has been demonstrated e.g. in the former European research project ARAMIS (Accidental Risk...

  2. Human factor in the problem of Russian nuclear industry safety

    International Nuclear Information System (INIS)

    Abramova, V.

    2002-01-01

    The approach to human factor definition, considered in the paper, consists of recognition of as many as possible factors for developing a complete list of factors, which have influence on mistakes or successful work of NPP personnel. Safety culture is considered as the main factor. The enhancement in nuclear power industry includes an optimization of organizational structures and development of personnel safety attitudes. The organizational factors, as possible root causes for human errors, need to be identified, assessed and improved. The organizational activities taken in Russia are presented

  3. German Translation and Validation of the Cognitive Style Questionnaire Short Form (CSQ-SF-D.

    Directory of Open Access Journals (Sweden)

    Quentin J M Huys

    Full Text Available The Cognitive Style Questionnaire is a valuable tool for the assessment of hopeless cognitive styles in depression research, with predictive power in longitudinal studies. However, it is very burdensome to administer. Even the short form is still long, and neither this nor the original version exist in validated German translations.The questionnaire was translated from English to German, back-translated and commented on by clinicians. The reliability, factor structure and external validity of an online form of the questionnaire were examined on 214 participants. External validity was measured on a subset of 90 subjects.The resulting CSQ-SF-D had good to excellent reliability, both across items and subscales, and similar external validity to the original English version. The internality subscale appeared less robust than other subscales. A detailed analysis of individual item performance suggests that stable results could be achieved with a very short form (CSQ-VSF-D including only 27 of the 72 items.The CSQ-SF-D is a validated and freely distributed translation of the CSQ-SF into German. This should make efficient assessment of cognitive style in German samples more accessible to researchers.

  4. Comprehensive Study of SF_6/O_2 Plasma Etching for Mc-Silicon Solar Cells

    International Nuclear Information System (INIS)

    Li Tao; Zhou Chun-Lan; Wang Wen-Jing

    2016-01-01

    The mask-free SF_6/O_2 plasma etching technique is used to produce surface texturization of mc-silicon solar cells for efficient light trapping in this work. The SEM images and mc-silicon etching rate show the influence of plasma power, SF_6/O_2 flow ratios and etching time on textured surface. With the acidic-texturing samples as a reference, the reflection and IQE spectra are obtained under different experimental conditions. The IQE spectrum measurement shows an evident increase in the visible and infrared responses. By using the optimized plasma power, SF_6/O_2 flow ratios and etching time, the optimal efficiency of 15.7% on 50 × 50 mm"2 reactive ion etching textured mc-silicon silicon solar cells is achieved, mostly due to the improvement in the short-circuit current density. The corresponding open-circuit voltage, short-circuit current density and fill factor are 611 mV, 33.6 mA/cm"2, 76.5%, respectively. It is believed that such a low-cost and high-performance texturization process is promising for large-scale industrial silicon solar cell manufacturing. (paper)

  5. Reliability Analysis and Calibration of Partial Safety Factors for Redundant Structures

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard

    1998-01-01

    Redundancy is important to include in the design and analysis of structural systems. In most codes of practice redundancy is not directly taken into account. In the paper various definitions of a deterministic and reliability based redundancy measure are reviewed. It is described how reundancy can...... be included in the safety system and how partial safety factors can be calibrated. An example is presented illustrating how redundancy is taken into account in the safety system in e.g. the Danish codes. The example shows how partial safety factors can be calibrated to comply with the safety level...

  6. The inertial attitude augmentation for ambiguity resolution in SF/SE-GNSS attitude determination.

    Science.gov (United States)

    Zhu, Jiancheng; Hu, Xiaoping; Zhang, Jingyu; Li, Tao; Wang, Jinling; Wu, Meiping

    2014-06-26

    The Unaided Single Frequency/Single Epoch Global Navigation Satellite System (SF/SE GNSS) model is the most challenging scenario for ambiguity resolution in the GNSS attitude determination application. To improve the performance of SF/SE-GNSS ambiguity resolution without excessive cost, the Micro-Electro-Mechanical System Inertial Measurement Unit (MEMS-IMU) is a proper choice for the auxiliary sensor that carries out the inertial attitude augmentation. Firstly, based on the SF/SE-GNSS compass model, the Inertial Derived Baseline Vector (IDBV) is defined to connect the MEMS-IMU attitude measurement with the SF/SE-GNSS ambiguity search space, and the mechanism of inertial attitude augmentation is revealed from the perspective of geometry. Then, through the quantitative description of model strength by Ambiguity Dilution of Precision (ADOP), two ADOPs are specified for the unaided SF/SE-GNSS compass model and its inertial attitude augmentation counterparts, respectively, and a sufficient condition is proposed for augmenting the SF/SE-GNSS model strength with inertial attitude measurement. Finally, in the framework of an integer aperture estimator with fixed failure rate, the performance of SF/SE-GNSS ambiguity resolution with inertial attitude augmentation is analyzed when the model strength is varying from strong to weak. The simulation results show that, in the SF/SE-GNSS attitude determination application, MEMS-IMU can satisfy the requirements of ambiguity resolution with inertial attitude augmentation.

  7. The Inertial Attitude Augmentation for Ambiguity Resolution in SF/SE-GNSS Attitude Determination

    Science.gov (United States)

    Zhu, Jiancheng; Hu, Xiaoping; Zhang, Jingyu; Li, Tao; Wang, Jinling; Wu, Meiping

    2014-01-01

    The Unaided Single Frequency/Single Epoch Global Navigation Satellite System (SF/SE GNSS) model is the most challenging scenario for ambiguity resolution in the GNSS attitude determination application. To improve the performance of SF/SE-GNSS ambiguity resolution without excessive cost, the Micro-Electro-Mechanical System Inertial Measurement Unit (MEMS-IMU) is a proper choice for the auxiliary sensor that carries out the inertial attitude augmentation. Firstly, based on the SF/SE-GNSS compass model, the Inertial Derived Baseline Vector (IDBV) is defined to connect the MEMS-IMU attitude measurement with the SF/SE-GNSS ambiguity search space, and the mechanism of inertial attitude augmentation is revealed from the perspective of geometry. Then, through the quantitative description of model strength by Ambiguity Dilution of Precision (ADOP), two ADOPs are specified for the unaided SF/SE-GNSS compass model and its inertial attitude augmentation counterparts, respectively, and a sufficient condition is proposed for augmenting the SF/SE-GNSS model strength with inertial attitude measurement. Finally, in the framework of an integer aperture estimator with fixed failure rate, the performance of SF/SE-GNSS ambiguity resolution with inertial attitude augmentation is analyzed when the model strength is varying from strong to weak. The simulation results show that, in the SF/SE-GNSS attitude determination application, MEMS-IMU can satisfy the requirements of ambiguity resolution with inertial attitude augmentation. PMID:24971472

  8. Unchained Melody: Revisiting the Estimation of SF-6D Values

    Science.gov (United States)

    Craig, Benjamin M.

    2015-01-01

    Purpose In the original SF-6D valuation study, the analytical design inherited conventions that detrimentally affected its ability to predict values on a quality-adjusted life year (QALY) scale. Our objective is to estimate UK values for SF-6D states using the original data and multi-attribute utility (MAU) regression after addressing its limitations and to compare the revised SF-6D and EQ-5D value predictions. Methods Using the unaltered data (611 respondents, 3503 SG responses), the parameters of the original MAU model were re-estimated under 3 alternative error specifications, known as the instant, episodic, and angular random utility models. Value predictions on a QALY scale were compared to EQ-5D3L predictions using the 1996 Health Survey for England. Results Contrary to the original results, the revised SF-6D value predictions range below 0 QALYs (i.e., worse than death) and agree largely with EQ-5D predictions after adjusting for scale. Although a QALY is defined as a year in optimal health, the SF-6D sets a higher standard for optimal health than the EQ-5D-3L; therefore, it has larger units on a QALY scale by construction (20.9% more). Conclusions Much of the debate in health valuation has focused on differences between preference elicitation tasks, sampling, and instruments. After correcting errant econometric practices and adjusting for differences in QALY scale between the EQ-5D and SF-6D values, the revised predictions demonstrate convergent validity, making them more suitable for UK economic evaluations compared to original estimates. PMID:26359242

  9. Crystal structure and functional characterization of SF216 from Shigella flexneri.

    Science.gov (United States)

    Kim, Ha-Neul; Seok, Seung-Hyeon; Lee, Yoo-Sup; Won, Hyung-Sik; Seo, Min-Duk

    2017-11-01

    Shigella flexneri is a Gram-negative anaerobic bacterium that causes highly infectious bacterial dysentery in humans. Here, we solved the crystal structure of SF216, a hypothetical protein from the S. flexneri 5a strain M90T, at 1.7 Å resolution. The crystal structure of SF216 represents a homotrimer stabilized by intersubunit interactions and ion-mediated electrostatic interactions. Each subunit consists of three β-strands and five α-helices with the β-β-β-α-α-α-α-α topology. Based on the structural information, we also demonstrate that SF216 shows weak ribonuclease activity by a fluorescence quenching assay. Furthermore, we identify potential druggable pockets (putative hot spots) on the surface of the SF216 structure by computational mapping. © 2017 Federation of European Biochemical Societies.

  10. Assessment of potential perturbations to Posiva's SF repository at Olkiluoto from the ONKALO Facility

    International Nuclear Information System (INIS)

    Alexander, W.R.; Neall, F.B.

    2007-06-01

    Although the site of the proposed spent fuel repository at Olkiluoto in southwest Finland has been extensively investigated over the last fifteen years, Posiva decided to construct a rock characterisation facility (RCF) at the site to collect more detailed information on the host rock. The data provided by the ONKALO RCF will support the detailed repository design and safety assessment (SA) and will allow construction and disposal methods to be tested under relevant in situ conditions. ONKALO has been so designed that it can act as access routes and auxiliary rooms for the SF repository and so may be in use for the entire operational phase of the repository (currently up to 100 years). Extensive experience from deep mining suggests that such an extended period of operation could have a major impact on both the host rock formation and any nearby facilities, such as the SF repository, and, consequently, Posiva decided to investigate potential perturbations to the repository caused by the existence of ONKALO. A preliminary assessment was carried out in 2003, before construction of the RCF began, and this was recently partially updated in early 2006. This current report represents the most recent update of these reports and has the primary aims of: checking if the previous reports have missed any essential issues; evaluating whether the identified issues have been treated in an appropriate manner; updating the reports in the light of new information. This is carried out based on data from ONKALO itself and on improved understanding of some of the perturbation mechanisms identified in the original studies along with a consideration of newly identified processes. This report differs from the previous studies in addressing the issues in a more SA-oriented manner (for example, focussing the examination of potential perturbations on a re-worked FEP list), allowing the work reported here to be more easily dovetailed with future SA studies on the Olkiluoto repository

  11. The DAPP-SF as a screener for personality disorder in a forensic setting.

    Science.gov (United States)

    Spaans, Marleen; Rinne, Thomas; de Beurs, Edwin; Spinhoven, Philip

    2015-01-01

    Studies on the Dimensional Assessment of Personality Pathology-Short Form (DAPP-SF) have shown its ability to identify treatment-seeking patients with personality disorders. This study focuses on its screening potential for personality disorder in 89 criminal suspects (77 men, 12 women; M age = 37.0 years) undergoing residential pretrial psychological assessments in a high-security setting. It was expected that Structured Interview for DSM-IV Personality (SIDP-IV) criteria met for personality disorder(s) would be associated with higher DAPP-SF scores. A floor effect was found in DAPP-SF scores: The forensic population reported less personality pathology than the general population. Only moderate associations between DAPP-SF and SIDP-IV outcome were found. Receiver operating characteristic analysis showed that some DAPP-SF subscales did not exceed chance level in their ability to screen for personality disorders. It is concluded that the DAPP-SF has limited usefulness as a screener for personality disorders in a forensic pretrial setting. Alternative forensic screening instruments are presented.

  12. Validation of the Internet Gaming Disorder Scale - Short-Form (IGDS9-SF) in an Italian-speaking sample.

    Science.gov (United States)

    Monacis, Lucia; Palo, Valeria de; Griffiths, Mark D; Sinatra, Maria

    2016-12-01

    Background and aims The inclusion of Internet Gaming Disorder (IGD) in Section III of the fifth edition of the Diagnostic and Statistical Manual of Mental Disorders has increased the interest of researchers in the development of new standardized psychometric tools for the assessment of such a disorder. To date, the nine-item Internet Gaming Disorder Scale - Short-Form (IGDS9-SF) has only been validated in English, Portuguese, and Slovenian languages. Therefore, the aim of this investigation was to examine the psychometric properties of the IGDS9-SF in an Italian-speaking sample. Methods A total of 757 participants were recruited to the present study. Confirmatory factor analysis and multi-group analyses were applied to assess the construct validity. Reliability analyses comprised the average variance extracted, the standard error of measurement, and the factor determinacy coefficient. Convergent and criterion validities were established through the associations with other related constructs. The receiver operating characteristic curve analysis was used to determine an empirical cut-off point. Results Findings confirmed the single-factor structure of the instrument, its measurement invariance at the configural level, and the convergent and criterion validities. Satisfactory levels of reliability and a cut-off point of 21 were obtained. Discussion and conclusions The present study provides validity evidence for the use of the Italian version of the IGDS9-SF and may foster research into gaming addiction in the Italian context.

  13. Alpha2delta-1 in SF1+ Neurons of the Ventromedial Hypothalamus Is an Essential Regulator of Glucose and Lipid Homeostasis

    Directory of Open Access Journals (Sweden)

    Jennifer A. Felsted

    2017-12-01

    Full Text Available Summary: The central mechanisms controlling glucose and lipid homeostasis are inadequately understood. We show that α2δ-1 is an essential regulator of glucose and lipid balance, acting in steroidogenic factor-1 (SF1 neurons of the ventromedial hypothalamus (VMH. These effects are body weight independent and involve regulation of SF1+ neuronal activity and sympathetic output to metabolic tissues. Accordingly, mice with α2δ-1 deletion in SF1 neurons exhibit glucose intolerance, altered lipolysis, and decreased cholesterol content in adipose tissue despite normal energy balance regulation. Profound reductions in the firing rate of SF1 neurons, decreased sympathetic output, and elevated circulating levels of serotonin are associated with these alterations. Normal calcium currents but reduced excitatory postsynaptic currents in mutant SF1 neurons implicate α2δ-1 in the promotion of excitatory synaptogenesis separate from its canonical role as a calcium channel subunit. Collectively, these findings identify an essential mechanism that regulates VMH neuronal activity and glycemic and lipid control and may be a target for tackling metabolic disease. : Felsted et al. show a required role of the calcium channel subunit and thrombospondin receptor α2δ-1 in regulating glucose and lipid homeostasis in the ventromedial hypothalamus (VMH. These effects are caused by regulation of SF1+ neuronal activity in the VMH through non-canonical mechanisms and concomitant influences on sympathetic output. Keywords: diabetes, VMH, hypothalamus, glucose, norepinephrine, serotonin, excitability, lipid, SF1

  14. Psychometric evaluation of the Mental Health Continuum-Short Form (MHC-SF) in Chinese adolescents - a methodological study.

    Science.gov (United States)

    Guo, Cheng; Tomson, Göran; Guo, Jizhi; Li, Xiangyun; Keller, Christina; Söderqvist, Fredrik

    2015-12-10

    In epidemiological surveillance of mental health there is good reason to also include scales that measure the presence of well-being rather than merely symptoms of ill health. The Mental Health Continuum-Short Form (MHC-SF) is a self-reported scale to measure emotional, psychological and social well-being and conduct categorical diagnosis of positive mental health. This particular instrument includes the three core components of the World Health Organization's definition of mental health and had previously not been psychometrically evaluated on adolescents in China. In total 5,399 students (51.1% female) from schools in the urban areas of Weifang in China were included in the study (mean age = 15.13, SD = 1.56). Participants completed a comprehensive questionnaire with several scales, among them the MHC-SF. Statistical analyses to evaluate reliability, structural validity, measurement invariance, presence of floor and ceiling effects and to some extent external validity of the MHC-SF were carried out. The Cronbach's α coefficients for sub-scales as well as the total scale were all above 0.80 indicating good reliability. Confirmative factor analysis confirmed the three-dimensional structure of the Chinese version of MHC-SF and supported the configural and metric invariance across gender and age. Noteworthy ceiling effects were observed for single items and sub-scales although not for the total scale. More importantly, observed floor effects were negligible. The stronger correlation found between MHC-SF and Minneapolis-Manchester Quality of Life Instrument (as measure of positive mental health) than between MHC-SF and Hospital Anxiety Depression Scale (as measure of mental illness and distress) yielded support for external validity. In conclusion, the main findings of this study are in line with studies from other countries that evaluated the psychometric properties of the MHC-SF and show that this instrument, that includes the three core components of the

  15. Patient safety - the role of human factors and systems engineering.

    Science.gov (United States)

    Carayon, Pascale; Wood, Kenneth E

    2010-01-01

    Patient safety is a global challenge that requires knowledge and skills in multiple areas, including human factors and systems engineering. In this chapter, numerous conceptual approaches and methods for analyzing, preventing and mitigating medical errors are described. Given the complexity of healthcare work systems and processes, we emphasize the need for increasing partnerships between the health sciences and human factors and systems engineering to improve patient safety. Those partnerships will be able to develop and implement the system redesigns that are necessary to improve healthcare work systems and processes for patient safety.

  16. Patient Safety: The Role of Human Factors and Systems Engineering

    Science.gov (United States)

    Carayon, Pascale; Wood, Kenneth E.

    2011-01-01

    Patient safety is a global challenge that requires knowledge and skills in multiple areas, including human factors and systems engineering. In this chapter, numerous conceptual approaches and methods for analyzing, preventing and mitigating medical errors are described. Given the complexity of healthcare work systems and processes, we emphasize the need for increasing partnerships between the health sciences and human factors and systems engineering to improve patient safety. Those partnerships will be able to develop and implement the system redesigns that are necessary to improve healthcare work systems and processes for patient safety. PMID:20543237

  17. An optical sensors for monitoring SF6 dissociation in a corona discharge

    International Nuclear Information System (INIS)

    Irawan, R.; Scelsi, G.B.; Woolsey, G.A.

    1999-01-01

    Sulphur hexafluoride (SF 6 ) is a chemically inert gas (Schumb, 1947) and has high dielectric strength, 3 times greater than air (Morrison and Robins, 1994). In high voltage systems, it is used both as a dielectric and an arc-quenching medium. An electrical breakdown event such as a partial discharge (corona) or arc will dissociate SF 6 into sulphur fluorides, sulphur and fluorine. In a contaminant-free environment, the dissociation products recombine back to SF 6 after extinction of the electrical discharge. Otherwise, some of the products will react with contaminants such as water vapour and oxygen, and with the metal surfaces and electrodes of the discharge chamber, to produce by-products including gaseous sulphur oxyfluorides and solid by-products (Van Brunt, 1985; Griffin et al, 1990 and Vukovic, 1997). As a consequence, a reduction in SF 6 concentration takes place, and the insulating efficiency of the system is degraded. If the SF 6 is not renewed, failure of the high voltage system is likely to eventually occur. One method of monitoring a system is to look for the presence of partial discharges, using techniques such as ultrasonic wave detection (Auckland et al, 1996) or fluorescent plastic fibre (Kurosawa et al., 1997). More directly, the integrity of the SF 6 may be examined using techniques such as mass spectrometry, gas chromatography-mass spectrometry and Fourier Transform Infra-Red Spectroscopy. Such techniques, however, are bulky and require gas samples to be extracted, and so they are unsuited to field use. Since SF 6 insulating systems involve high voltages and a high level of electromagnetic interference, direct in-situ optical monitoring appears to provide the best approach. This paper describes the development of such an optical sensing technique, specifically for continuous monitoring of SF 6 degradation in partial or corona discharges

  18. Implementation of a geological disposal facility (GDF) in the UK by the NDA Radioactive Waste Management Directorate (RWMD): the potential for interaction between the co-located ILW/LLW and HLW/SF components of a GDF - 16306

    International Nuclear Information System (INIS)

    Towler, George; Hicks, Tim; Watson, Sarah; Norris, Simon

    2009-01-01

    In June 2008 the UK government published a 'White Paper' as part of the 'Managing Radioactive Waste Safety' (MRWS) programme to provide a framework for managing higher activity radioactive wastes in the long-term through geological disposal. The White Paper identifies that there are benefits to disposing all of the UK's higher activity wastes (Low and Intermediate Level Waste (LLW and ILW), High Level Waste (HLW), Spent Fuel (SF), Uranium (U) and Plutonium (Pu)) at the same site, and this is currently the preferred option. It also notes that research will be required to support the detailed design and safety assessment in relation to any potentially detrimental interactions between the different modules. Different disposal system designs and associated Engineered Barrier Systems (EBS) will be required for these different waste types, i.e. ILW/LLW and HLW/SF. If declared as waste U would be disposed as ILW and Pu as HLW/SF. The Geological Disposal Facility (GDF) would therefore comprise two co-located modules (respectively for ILW/LLW and HLW/SF). This paper presents an overview of a study undertaken to assess the implications of co-location by identifying the key Thermo-Hydro-Mechanical-Chemical (THMC) interactions that might occur during both the operational and post-closure phases, and their consequences for GDF design, performance and safety. The MRWS programme is currently seeking expressions of interest from communities to host a GDF. Therefore, the study was required to consider a wide range of potential GDF host rocks and consistent, conceptual disposal system designs. Two example disposal concepts (i.e. combinations of host rock, GDF design including wasteform and layout, etc.) were carried forward for detailed assessment and a third for qualitative analysis. Dimensional and 1D analyses were used to identify the key interactions, and 3D models were used to investigate selected interactions in more detail. The results of this study show that it is possible

  19. Alpha2delta-1 in SF1+ Neurons of the Ventromedial Hypothalamus Is an Essential Regulator of Glucose and Lipid Homeostasis.

    Science.gov (United States)

    Felsted, Jennifer A; Chien, Cheng-Hao; Wang, Dongqing; Panessiti, Micaella; Ameroso, Dominique; Greenberg, Andrew; Feng, Guoping; Kong, Dong; Rios, Maribel

    2017-12-05

    The central mechanisms controlling glucose and lipid homeostasis are inadequately understood. We show that α2δ-1 is an essential regulator of glucose and lipid balance, acting in steroidogenic factor-1 (SF1) neurons of the ventromedial hypothalamus (VMH). These effects are body weight independent and involve regulation of SF1 + neuronal activity and sympathetic output to metabolic tissues. Accordingly, mice with α2δ-1 deletion in SF1 neurons exhibit glucose intolerance, altered lipolysis, and decreased cholesterol content in adipose tissue despite normal energy balance regulation. Profound reductions in the firing rate of SF1 neurons, decreased sympathetic output, and elevated circulating levels of serotonin are associated with these alterations. Normal calcium currents but reduced excitatory postsynaptic currents in mutant SF1 neurons implicate α2δ-1 in the promotion of excitatory synaptogenesis separate from its canonical role as a calcium channel subunit. Collectively, these findings identify an essential mechanism that regulates VMH neuronal activity and glycemic and lipid control and may be a target for tackling metabolic disease. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

  20. Single crystal X-ray structural features of aromatic compounds having a pentafluorosulfuranyl (SF5) functional group

    Czech Academy of Sciences Publication Activity Database

    Du, J.; Hua, G.; Beier, Petr; Slawin, A. M. Z.; Woollins, J. D.

    2017-01-01

    Roč. 28, č. 3 (2017), s. 723-733 ISSN 1040-0400 Institutional support: RVO:61388963 Keywords : pentafluorosulfuranyl (SF5) group * aromatic compounds * single crystal X-ray structure * intramolecular interactions * intermolecular interactions Subject RIV: CC - Organic Chemistry OBOR OECD: Organic chemistry Impact factor: 1.582, year: 2016

  1. Patient safety risk factors in minimally invasive surgery : A validation study

    NARCIS (Netherlands)

    Rodrigues, S.P.; Ter Kuile, M.; Dankelman, J.; Jansen, F.W.

    2012-01-01

    This study was conducted to adapt and validate a patient safety (PS) framework for minimally invasive surgery (MIS) as a first step in understanding the clinical relevance of various PS risk factors in MIS. Eight patient safety risk factor domains were identified using frameworks from a systems

  2. Two-temperature transport coefficients of SF{sub 6}–N{sub 2} plasma

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Fei; Chen, Zhexin; Wu, Yi, E-mail: wuyic51@mail.xjtu.edu.cn; Rong, Mingzhe; Wang, Chunlin [State Key Laboratory of Electrical Insulation and Power Equipment, School of Electrical Engineering, Xi' an Jiaotong University, Xi' an 710049 (China); Guo, Anxiang; Liu, Zirui [Electric Power Research Institute of State Grid Shaanxi Electric Power Company, Xian (China)

    2015-10-15

    Sulfur hexafluoride (SF{sub 6}) is widely adopted in electric power industry, especially in high-voltage circuit breakers and gas-insulated switchgear. However, the use of SF{sub 6} is limited by its high liquidation temperature and high global warming potential. Recently, research shows SF{sub 6}–N{sub 2} mixture, which shows environmental friendliness and good electrical properties, may be a feasible substitute for pure SF{sub 6}. This paper is devoted to the calculation of and transport coefficients of SF{sub 6}–N{sub 2} mixture under both LTE (local thermodynamic equilibrium) and non-LTE condition. The two–temperature mass action law was used to determine the composition. The transport coefficients were calculated by classical Chapman–Enskog method simplified by Devoto. The thermophysical properties are presented for electron temperatures of 300–40 000 K, ratios of electron to heavy species temperature of 1–10 and N{sub 2} mole fraction of 0%–100% at atmospheric pressure. The ionization processes under both LTE and non-LTE have been discussed. The results show that deviations from local thermodynamic equilibrium significantly affect the properties of SF{sub 6}–N{sub 2} plasma, especially before the plasma is fully ionized. The different influence of N{sub 2} on properties for SF{sub 6}–N{sub 2} plasma in and out of LTE has been found. The results will serve as reliable reference data for computational simulation of the behavior of SF{sub 6}–N{sub 2} plasmas.

  3. Marijuana Craving Questionnaire (MCQ-SF/Versão Brasil: validação semântica Marijuana Craving Questionnaire (MCQ-SF/Brazil Version: semantic validation

    Directory of Open Access Journals (Sweden)

    Rosemeri Siqueira Pedroso

    2009-01-01

    Full Text Available OBJETIVO: O objetivo deste estudo foi realizar tradução e adaptação transcultural do Marijuana Craving Questionnaire (MCQ-SF10, que avalia o craving por maconha em uma amostra brasileira. MÉTODO: O MCQ-SF foi traduzido do inglês para o português, aplicado em 10 sujeitos, submetido ao brainstorming num grupo de três indivíduos para reprodução individual e verbal, item a item. Realizou-se o back-translation, uma versão para o idioma de origem, a partir da primeira tradução e do brainstorming. Logo após, traduziu-se novamente para o português. Um comitê de juízes especialistas analisou todas as traduções. RESULTADOS: Após as considerações do comitê e um estudo-piloto com 30 sujeitos, a versão final do MCQ-SF/Versão Brasil foi construída. CONCLUSÃO: Os resultados demonstraram uma equivalência semântica satisfatória entre as versões. O MCQ-SF/Versão Brasil pode ser útil para avaliar o craving pela maconha nos dependentes dessa substância.OBJECTIVE: The aim of this study was to translate and adapt culturally the Marijuana Craving Questionnaire (MCQ-SF10 which evaluates the craving for marijuana in a Brazilian sample. METHOD: The Marijuana Craving Questionnaire (MCQ-SF was translated from English to Portuguese, administered to 10 subjects, submitted to a brainstorming in a group of three people for individual and verbal reproduction, item by item. Back-translation was executed, a translation for the original language, based on first translation and from brainstorming. Soon after, it was translated again into Portuguese. A committee of specialists analyzed all translations. RESULTS: After the committee considerations and a pilot study with 30 subjects, the final version of MCQ-SF/Versão Brasil was built. CONCLUSION: The results showed a satisfactory semantic equivalence between versions. The MCQ/Versão Brasil can be useful to evaluate the craving for marijuana on the dependents of this substance.

  4. Human factors and safety in emergency medicine

    Science.gov (United States)

    Schaefer, H. G.; Helmreich, R. L.; Scheidegger, D.

    1994-01-01

    A model based on an input process and outcome conceptualisation is suggested to address safety-relevant factors in emergency medicine. As shown in other dynamic and demanding environments, human factors play a decisive role in attaining high quality service. Attitudes held by health-care providers, organisational shells and work-cultural parameters determine communication, conflict resolution and workload distribution within and between teams. These factors should be taken into account to improve outcomes such as operational integrity, job satisfaction and morale.

  5. Effects of Yoga on Measures of Health-related Quality of Life from SF-36 and SF-12 Assessments: A Systematic Review and Meta-analysis

    Directory of Open Access Journals (Sweden)

    Gabriel Benavidez

    2017-12-01

    Full Text Available Objectives Yoga is commonly being adopted and prescribed with the intent to increase a participant’s health-related quality of life. In practice, the current gold-standard health-related quality of life measurement tool is the SF-36 and SF-12 assessments. Therefore, it is important for yoga scientists and practitioners to understand yoga’s effects on health-related quality of life when in fact a gold-standard assessment is implemented. The purpose of this study was to employ systematic review and meta-analytic techniques to examine the effect of yoga on measures of health-related quality of life measured using only the SF-36/12 assessments. Methods A current (January 2007 to December 2016 systematic review of the Pubmed database was conducted and included studies that used yoga as an intervention with outcomes measures of health-related quality of life measured by the SF-36/12. Ten different measures were extracted from studies including eight dimension scores (physical functioning, bodily pain, physical role function, general health, mental health, emotional role function, social function, and vitality and two summary scores (physical component and mental component. Ten different meta-analyses were performed using calculated standardized mean effect sizes and random effects models. Both moderator and sensitivity analyses were conducted. Results A total of 34 studies were included is the analyses with 185 independent effect sizes. Yoga intervention showed a significant positive effect on all ten measures of the SF-36/12. Effects ranged from 0.56 (0.39-0.73 to 0.28 (0.17-0.40. Yoga type (Hatha, Iyengar, Other moderated the effects of yoga intervention on the mental component (p=.021, with Hatha yielding the greatest effects (ES=1.63, 0.61-2.65. The sensitivity analysis showed little to no bias in mean effect size estimates. Conclusions The meta-analytic evidence clearly supports the small-to-medium positive effects of yoga on health

  6. Laser excitation of SF6: spectroscopy and coherent pulse propagation effects

    International Nuclear Information System (INIS)

    Cantrell, C.D.; Makarov, A.A.; Louisell, W.H.

    1978-01-01

    Recent theoretical studies of coherent propagation effects in SF 6 and other polyatomic molecules are summarized beginning with an account of relevant aspects of the high-resolution spectroscopy of the ν 3 band of SF 6 . A laser pulse propagating in a molecular gas can acquire new frequencies which were not initially present in the pulse, and, in fact, a wave is coherently generated at the frequency of every molecular transition accessible from the initial molecular energy levels. The possible consequences of coherent generation of sidebands for the multiple-photon excitation of SF 6 and other polyatomic molecules are discussed

  7. SF3B1-initiating mutations in MDS-RSs target lymphomyeloid hematopoietic stem cells.

    Science.gov (United States)

    Mortera-Blanco, Teresa; Dimitriou, Marios; Woll, Petter S; Karimi, Mohsen; Elvarsdottir, Edda; Conte, Simona; Tobiasson, Magnus; Jansson, Monika; Douagi, Iyadh; Moarii, Matahi; Saft, Leonie; Papaemmanuil, Elli; Jacobsen, Sten Eirik W; Hellström-Lindberg, Eva

    2017-08-17

    Mutations in the RNA splicing gene SF3B1 are found in >80% of patients with myelodysplastic syndrome with ring sideroblasts (MDS-RS). We investigated the origin of SF3B1 mutations within the bone marrow hematopoietic stem and progenitor cell compartments in patients with MDS-RS. Screening for recurrently mutated genes in the mononuclear cell fraction revealed mutations in SF3B1 in 39 of 40 cases (97.5%), combined with TET2 and DNMT3A in 11 (28%) and 6 (15%) patients, respectively. All recurrent mutations identified in mononuclear cells could be tracked back to the phenotypically defined hematopoietic stem cell (HSC) compartment in all investigated patients and were also present in downstream myeloid and erythroid progenitor cells. While in agreement with previous studies, little or no evidence for clonal ( SF3B1 mutation) involvement could be found in mature B cells, consistent involvement at the pro-B-cell progenitor stage was established, providing definitive evidence for SF3B1 mutations targeting lymphomyeloid HSCs and compatible with mutated SF3B1 negatively affecting lymphoid development. Assessment of stem cell function in vitro as well as in vivo established that only HSCs and not investigated progenitor populations could propagate the SF3B1 mutated clone. Upon transplantation into immune-deficient mice, SF3B1 mutated MDS-RS HSCs differentiated into characteristic ring sideroblasts, the hallmark of MDS-RS. Our findings provide evidence of a multipotent lymphomyeloid HSC origin of SF3B1 mutations in MDS-RS patients and provide a novel in vivo platform for mechanistically and therapeutically exploring SF3B1 mutated MDS-RS. © 2017 by The American Society of Hematology.

  8. To the problem of the statistical basis of evaluation of the mechanical safety factor

    International Nuclear Information System (INIS)

    Tsyganov, S.V.

    2009-01-01

    The methodology applied for the safety factor assessment of the WWER fuel cycles uses methods and terms of statistics. Value of the factor is calculated on the basis of estimation of probability to meet predefined limits. Such approach demands the special attention to the statistical properties of parameters of interest. Considering the mechanical constituents of the engineering factor it is assumed uncertainty factors of safety parameters are stochastic values. It characterized by probabilistic distributions that can be unknown. Traditionally in the safety factor assessment process the unknown parameters are estimated from the conservative points of view. This paper analyses how the refinement of the factors distribution parameters is important for the assessment of the mechanical safety factor. For the analysis the statistical approach is applied for modelling of different type of factor probabilistic distributions. It is shown the significant influence of the shape and parameters of distributions for some factors on the value of mechanical safety factor. (Authors)

  9. To the problem of the statistical basis of evaluation of the mechanical safety factor

    International Nuclear Information System (INIS)

    Tsyganov, S.

    2009-01-01

    The methodology applied for the safety factor assessment of the VVER fuel cycles uses methods and terms of statistics. Value of the factor is calculated on the basis of estimation of probability to meet predefined limits. Such approach demands the special attention to the statistical properties of parameters of interest. Considering the mechanical constituents of the engineering factor it is assumed uncertainty factors of safety parameters are stochastic values. It characterized by probabilistic distributions that can be unknown. Traditionally in the safety factor assessment process the unknown parameters are estimated from the conservative points of view. This paper analyses how the refinement of the factors distribution parameters is important for the assessment of the mechanical safety factor. For the analysis the statistical approach is applied for modelling of different type of factor probabilistic distributions. It is shown the significant influence of the shape and parameters of distributions for some factors on the value of mechanical safety factor. (author)

  10. A comparison between spectra of runaway electron beams in SF6 and air

    International Nuclear Information System (INIS)

    Zhang, Cheng; Wang, Ruexue; Yan, Ping; Shao, Tao; Tarasenko, Victor; Gu, Jianwei; Baksht, Evgenii

    2015-01-01

    Runaway electron (RAE) with extremely high-energy plays important role on the avalanche propagation, streamer formation, and ionization waves in nanosecond-pulse discharges. In this paper, the generation of a supershort avalanche electron beam (SAEB) in SF 6 and air in an inhomogeneous electric field is investigated. A VPG-30-200 generator with a pulse rise time of ∼1.6 ns and a full width at half maximum of 3–5 ns is used to produce RAE beams. The SAEBs in SF 6 and air are measured by using aluminum foils with different thicknesses. Furthermore, the SAEB spectra in SF 6 and air at pressures of 7.5 Torr, 75 Torr, and 750 Torr are compared. The results showed that amplitude of RAE beam current generated at the breakdown in SF 6 was approximately an order of magnitude less than that in air. The energy of SAEB in air was not smaller than that in SF 6 in nanosecond-pulse discharges under otherwise equal conditions. Moreover, the difference between the maximum energy of the electron distributions in air and SF 6 decreased when the rise time of the voltage pulse increased. It was because the difference between the breakdown voltages in air and SF 6 decreased when the rise time of the voltage pulse increased

  11. A comparison between spectra of runaway electron beams in SF6 and air

    Science.gov (United States)

    Zhang, Cheng; Tarasenko, Victor; Gu, Jianwei; Baksht, Evgenii; Wang, Ruexue; Yan, Ping; Shao, Tao

    2015-12-01

    Runaway electron (RAE) with extremely high-energy plays important role on the avalanche propagation, streamer formation, and ionization waves in nanosecond-pulse discharges. In this paper, the generation of a supershort avalanche electron beam (SAEB) in SF6 and air in an inhomogeneous electric field is investigated. A VPG-30-200 generator with a pulse rise time of ˜1.6 ns and a full width at half maximum of 3-5 ns is used to produce RAE beams. The SAEBs in SF6 and air are measured by using aluminum foils with different thicknesses. Furthermore, the SAEB spectra in SF6 and air at pressures of 7.5 Torr, 75 Torr, and 750 Torr are compared. The results showed that amplitude of RAE beam current generated at the breakdown in SF6 was approximately an order of magnitude less than that in air. The energy of SAEB in air was not smaller than that in SF6 in nanosecond-pulse discharges under otherwise equal conditions. Moreover, the difference between the maximum energy of the electron distributions in air and SF6 decreased when the rise time of the voltage pulse increased. It was because the difference between the breakdown voltages in air and SF6 decreased when the rise time of the voltage pulse increased.

  12. TM4SF1 Promotes Gemcitabine Resistance of Pancreatic Cancer In Vitro and In Vivo.

    Directory of Open Access Journals (Sweden)

    Jia Cao

    Full Text Available TM4SF1 is overexpressed in pancreatic ductal adenocarcinoma (PDAC and affects the development of this cancer. Also, multidrug resistance (MDR is generally associated with tumor chemoresistance in pancreatic cancer. However, the correlation between TM4SF1 and MDR remains unknown. This research aims to investigate the effect of TM4SF1 on gemcitabine resistance in PDAC and explore the possible molecular mechanism between TM4SF1 and MDR.The expression of TM4SF1 was evaluated in pancreatic cancer cell lines and human pancreatic duct epithelial (HPDE cell lines by quantitative RT-PCR. TM4SF1 siRNA transfection was carried out using Hiperfect transfection reagent to knock down TM4SF1. The transcripts were analyzed by quantitative RT-PCR, RT-PCR and western blotting for further study. The cell proliferation and apoptosis were obtained to investigate the sensitivity to gemcitabine of pancreatic cancer cells after silencing TM4SF1 in vitro. We demonstrated that cell signaling of TM4SF1 mediated chemoresistance in cancer cells by assessing the expression of multidrug resistance (MDR genes using quantitative RT-PCR. In vivo, we used orthotopic pancreatic tumor models to investigate the effect of proliferation after silencing TM4SF1 by a lentivirus-mediated shRNA in MIA PaCa-2 cell lines.The mRNA expression of TM4SF1 was higher in seven pancreatic cancer cell lines than in HPDE cell lines. In three gemcitabine-sensitive cell lines (L3.6pl, BxPC-3, SU86.86, the expression of TM4SF1 was lower than that in four gemcitabine-resistant cell lines (MIA PaCa-2, PANC-1, Hs766T, AsPC-1. We evaluated that TM4SF1 was a putative target for gemcitabine resistance in pancreatic cancer cells. Using AsPC-1, MIA PaCa-2 and PANC-1, we investigated that TM4SF1 silencing affected cell proliferation and increased the percentages of cell apoptosis mediated by treatment with gemcitabine compared with cells which were treated with negative control. This resistance was associated

  13. Validation of the Internet Gaming Disorder Scale – Short-Form (IGDS9-SF) in an Italian-speaking sample

    Science.gov (United States)

    Monacis, Lucia; de Palo, Valeria; Griffiths, Mark D.; Sinatra, Maria

    2016-01-01

    Background and aims The inclusion of Internet Gaming Disorder (IGD) in Section III of the fifth edition of the Diagnostic and Statistical Manual of Mental Disorders has increased the interest of researchers in the development of new standardized psychometric tools for the assessment of such a disorder. To date, the nine-item Internet Gaming Disorder Scale – Short-Form (IGDS9-SF) has only been validated in English, Portuguese, and Slovenian languages. Therefore, the aim of this investigation was to examine the psychometric properties of the IGDS9-SF in an Italian-speaking sample. Methods A total of 757 participants were recruited to the present study. Confirmatory factor analysis and multi-group analyses were applied to assess the construct validity. Reliability analyses comprised the average variance extracted, the standard error of measurement, and the factor determinacy coefficient. Convergent and criterion validities were established through the associations with other related constructs. The receiver operating characteristic curve analysis was used to determine an empirical cut-off point. Results Findings confirmed the single-factor structure of the instrument, its measurement invariance at the configural level, and the convergent and criterion validities. Satisfactory levels of reliability and a cut-off point of 21 were obtained. Discussion and conclusions The present study provides validity evidence for the use of the Italian version of the IGDS9-SF and may foster research into gaming addiction in the Italian context. PMID:27876422

  14. Factors impacting on the microbiological quality and safety of ...

    African Journals Online (AJOL)

    Problems with the safety and shelf life of export hake have been raised by the Namibian fishing industry. This prompted an investigation into the factors that may have an impact on the microbiological quality and safety of processed hake. Samples were collected along the processing line; the general microbiological quality ...

  15. Structural mechanical and antibacterial properties of HPMC/SF-AgNPs nanocomposite films

    Science.gov (United States)

    Harish, K. V.; Rao, B. Lakshmeesha; Asha, S.; Vipin, C.; Sangappa, Y.

    2018-04-01

    In the present study, Hydroxypropyl Methylcellulose (HPMC) pure and HPMC/SF-AgNPs biopolymer nanocomposite films were prepared by simple solution casting method. The prepared nanocomposite films were characterized using UV-Visible spectroscopy(UV-Vis), X-ray diffraction (XRD) measurements. The mechanical properties of HPMC/SF-AgNPs nanocomposites were found to be decrease with increase in the AgNP's concentrations. The HPMC/SF-AgNPs nanocomposites showed very good antibacterial activity against human pathogens P. aeruginosa, E.coli, and S.aureus.

  16. 78 FR 50079 - Information Collection Activities: Safety and Environmental Management Systems (SEMS); Proposed...

    Science.gov (United States)

    2013-08-16

    ... DEPARTMENT OF THE INTERIOR Bureau of Safety and Environmental Enforcement [Docket ID BSEE-2013-0005; OMB Control Number 1014-0017: 134E1700D2 EEEE500000 ET1SF0000.DAQ000] Information Collection Activities: Safety and Environmental Management Systems (SEMS); Proposed Collection; Comment Request...

  17. The 12-item medical outcomes study short form health survey version 2.0 (SF-12v2): a population-based validation study from Tehran, Iran.

    Science.gov (United States)

    Montazeri, Ali; Vahdaninia, Mariam; Mousavi, Sayed Javad; Asadi-Lari, Mohsen; Omidvari, Sepideh; Tavousi, Mahmoud

    2011-03-07

    The SF-12v2 is the improved version of the SF-12v1. This study aimed to validate the SF-12v2 in Iran. A random sample of the general population aged 18 years and over living in Tehran, Iran completed the instrument. Reliability was estimated using internal consistency and validity was assessed using known-groups comparison and convergent validity. In addition the factor structure of the questionnaire was extracted by performing both exploratory and confirmatory factor analyses (EFA and CFA). In all, 3685 individuals were studied (1887 male and 1798 female). Internal consistency for both summary measures was satisfactory. Cronbach's α for the Physical Component Summary (PCS-12) was 0.87 and for the Mental Component Summary (MCS-12) it was 0.82. Known-groups comparison showed that the SF-12v2 discriminated well between men and women and those who differed in age and educational status (P < 0.05). Furthermore, as hypothesized the physical functioning, role physical, bodily pain and general health subscales correlated higher with the PCS-12, while the vitality, social functioning, role emotional and mental health subscales correlated higher with the MCS-12. Finally the exploratory factor analysis indicated a two-factor structure (physical and mental health) that jointly accounted for 59.9% of the variance. The confirmatory factory analysis also indicated a good fit to the data for the two-latent structure (physical and mental health). Although the findings could not be generalized to the Iranian population, overall the findings suggest that the SF-12v2 is a reliable and valid measure of health related quality of life among Iranians and now could be used in future health outcome studies. However, further studies are recommended to establish its stability, responsiveness to change, and concurrent validity for this health survey in Iran.

  18. Evaluating the impact of grade crossing safety factors through signal detection theory

    Science.gov (United States)

    2012-10-22

    The purpose of this effort was to apply signal detection theory to descriptively model the impact : of five grade crossing safety factors to understand their effect on driver decision making. The : safety factors consisted of: improving commercial mo...

  19. The 12-item medical outcomes study short form health survey version 2.0 (SF-12v2: a population-based validation study from Tehran, Iran

    Directory of Open Access Journals (Sweden)

    Omidvari Sepideh

    2011-03-01

    Full Text Available Abstract Background The SF-12v2 is the improved version of the SF-12v1. This study aimed to validate the SF-12v2 in Iran. Methods A random sample of the general population aged 18 years and over living in Tehran, Iran completed the instrument. Reliability was estimated using internal consistency and validity was assessed using known-groups comparison and convergent validity. In addition the factor structure of the questionnaire was extracted by performing both exploratory and confirmatory factor analyses (EFA and CFA. Results In all, 3685 individuals were studied (1887male and 1798 female. Internal consistency for both summary measures was satisfactory. Cronbach's α for the Physical Component Summary (PCS-12 was 0.87 and for the Mental Component Summary (MCS-12 it was 0.82. Known-groups comparison showed that the SF-12v2 discriminated well between men and women and those who differed in age and educational status (P Conclusion Although the findings could not be generalized to the Iranian population, overall the findings suggest that the SF-12v2 is a reliable and valid measure of health related quality of life among Iranians and now could be used in future health outcome studies. However, further studies are recommended to establish its stability, responsiveness to change, and concurrent validity for this health survey in Iran.

  20. Studying the Relationship between Individual and Organizational Factors and Nurses' Perception of Patient Safety Culture

    Directory of Open Access Journals (Sweden)

    Farahnaz Abdolahzadeh

    2012-11-01

    Full Text Available Introduction: Safety culture is considered as an important factor in improving patient safety. Therefore, identifying individual and organizational factors affecting safety culture is crucial. This study was carried out to determine individual and organizational factors associated with nurses' perception of patient safety culture. Methods: The present descriptive study included 940 nurses working in four training hospitals affiliated with Urmia University of Medical Sciences (Iran. Data was collected through the self-report questionnaire of patient safety culture. Descriptive (number, percent, mean, and standard deviation and inferential (t-test and analysis of variance statistics were used to analyze the data in SPSS. Results: Nurses' perception of patient safety culture was significantly correlated with marital status, workplace, and overtime hours. Conclusion: The results of this study revealed that some individual and organizational factors can impact on nurses' perception of patient safety culture. Nursing authorities should thus pay more attention to factors which promote patient safety culture and ultimately the safety of provided services.

  1. Human factors in safety assessment. Safety culture assessment

    International Nuclear Information System (INIS)

    Zhang Li; Deng Zhiliang; Wang Yiqun; Huang Weigang

    1996-01-01

    This paper analyses the present conditions and problems in enterprises safety assessment, and introduces the characteristics and effects of safety culture. The authors think that safety culture must be used as a 'soul' to form the pattern of modern safety management. Furthermore, they propose that the human safety and synthetic safety management assessment in a system should be changed into safety culture assessment. Finally, the assessment indicators are discussed

  2. Human factors and systems engineering approach to patient safety for radiotherapy.

    Science.gov (United States)

    Rivera, A Joy; Karsh, Ben-Tzion

    2008-01-01

    The traditional approach to solving patient safety problems in healthcare is to blame the last person to touch the patient. But since the publication of To Err is Human, the call has been instead to use human factors and systems engineering methods and principles to solve patient safety problems. However, an understanding of the human factors and systems engineering is lacking, and confusion remains about what it means to apply their principles. This paper provides a primer on them and their applications to patient safety.

  3. Human Factors and Systems Engineering Approach to Patient Safety for Radiotherapy

    International Nuclear Information System (INIS)

    Rivera, A. Joy; Karsh, Ben-Tzion

    2008-01-01

    The traditional approach to solving patient safety problems in healthcare is to blame the last person to touch the patient. But since the publication of To Err is Human, the call has been instead to use human factors and systems engineering methods and principles to solve patient safety problems. However, an understanding of the human factors and systems engineering is lacking, and confusion remains about what it means to apply their principles. This paper provides a primer on them and their applications to patient safety

  4. Construct validity of SF-6D health state utility values in an employed population.

    Science.gov (United States)

    Baxter, Siyan; Sanderson, Kristy; Venn, Alison; Otahal, Petr; Palmer, Andrew J

    2015-04-01

    Health utility values permit cost utility analysis in workplace health promotion; however, utility measures of working populations have not been validated. To investigate construct validity of SF-6D health utility in a public service workforce. SF-12v2 Health Survey was administered to 3,408 randomly selected public service employees in Australia in 2010. SF-12 scores were converted to SF-6D health utility values. Associations and correlates of SF-6D with health, socio-demographic and work characteristics [comorbidities, body mass index (BMI), Kessler-10 psychological distress (K10), education, salary, effort-reward imbalance (ERI), absenteeism] were explored. Ceiling effects were analysed. Nationally representative employee SF-6D values from the Household, Income and Labour Dynamics in Australia (HILDA) survey (n = 11,234) were compared. All analyses were stratified by sex. Mean (SE) age was 45.7 (0.35) males; 44.5 (0.22) females. Females represented 72 % of the sample. Mean (SE) health utility 0.792 (0.004); 0.771 (0.003) was higher in males. SF-6D demonstrated both a significant inverse association (p negative correlations (female; male) with K10 (r = -0.63; r = -0.66), comorbidity count (r = -0.40; r = -0.33), ERI (r = -0.37; r = -0.34) and absenteeism (p imbalance and absenteeism are negatively associated with employee health. SF-6D is a valid measure of perceived health states in working populations.

  5. Safety of Nuclear Power Plants: Commissioning and Operation. Specific Safety Requirements

    International Nuclear Information System (INIS)

    2017-01-01

    This publication is a revision of IAEA Safety Standards Series No. NS-R-2, Safety of Nuclear Power Plants: Operation, and has been extended to cover the commissioning stage. It describes the requirements to be met to ensure the safe commissioning, operation, and transition from operation to decommissioning of nuclear power plants. Over recent years there have been developments in areas such as long term operation of nuclear power plants, plant ageing, periodic safety review, probabilistic safety analysis review and risk informed decision making processes. It became necessary to revise the IAEA’s Safety Requirements in these areas and to correct and/or improve the publication on the basis of feedback from its application by both the IAEA and its Member States. In addition, the requirements are governed by, and must apply, the safety objective and safety principles that are established in the IAEA Safety Standards Series No. SF-1, Fundamental Safety Principles. A review of Safety Requirements publications, initiated in 2011 following the accident in the Fukushima Daiichi nuclear power plant in Japan, revealed no significant areas of weakness but resulted in a small set of amendments to strengthen the requirements and facilitate their implementation. These are contained in the present publication.

  6. Present and future environmental ''problems'' with SF6 and other fluorinated gases

    International Nuclear Information System (INIS)

    Brunt, R.J. Van

    1996-01-01

    Sulfur hexafluoride (SF 6 ) is widely used as an insulating and arc interrupting gas in high-voltage systems and has found application in plasma processing of materials. However, SF 6 is known to decompose in electrical discharges to form toxic and corrosive gaseous compounds such as SOF 4 , SOF 2 , SO 2 F 2 , and HF. Of particular concern are the species S 2 F 10 and S 2 O 2 F 10 that are known to be highly toxic and to be formed in corona, spark, and arc discharges in high-pressure SF 6 . The conditions under which these byproducts are formed, the methods for removal, and the possible hazards that they present are reviewed. Sulfur hexafluoride is also an efficient absorber of infrared radiation and is estimated to have a global warning potential that is 2.5 x 10 4 times greater than that of CO 2 . Methods that have been proposed to control the use of SF 6 and reduce the rate of its release into the atmosphere will be examined. The advantages, disadvantages, and likely problems with finding technically feasible and environmentally acceptable replacements for SF 6 will be discussed

  7. Modelling of Safety Factors in the Design of GRP Composite Products

    DEFF Research Database (Denmark)

    Babu, B.J.C.; Prabhakaran, R.T. Durai; Lystrup, Aage

    2010-01-01

    as independent, while in real applications these factors may interact/influence each other. Following the concept developed by the authors, a simple graph theoretic model has been used to determine overall factor of safety. This is described with the help of an example and it has been demonstrated......An attempt has been made in this paper to arrive at the safety factor design of glass fibre reinforced polymer (GRP) composite products using graph theoretic model. In the conventional design and recommendations of the standards, these design factors affecting properties have been considered...

  8. Survey of factors associated with nurses' perception of patient safety.

    Science.gov (United States)

    Park, Sun A; Lee, Sui Jin; Choi, Go Un

    2011-01-01

    To describe the nurses' perception of hospital organization related to cultural issues on the safety of the patient and reporting medical errors. In addition, to identify factors associated with the safety of the patient and the nurse. A survey conducted during December 2008-Jannuary 2009, with 126 nurses using the Korean version of the AHRQ patient safety survey, a self-report 5-point Likert scale. Stata 10.0 was used for descriptive analysis, ANOVA (Analysis of variance) and logistic regression. National Cancer Center in Korea. The means for a working environment related to patient safety was 3.4 (±0.62). The associated factors of duration were at a present hospital, a special area, and direct contact with patients. Among organizational culture factors related to patient safety, the means were 3.81(±0.54) for the boss/manager's perception of patient safety and 3.37(±0.49) for the cooperation/collaboration between units. The frequent number of errors reported by nurses were 1~2(22.2%) times over the past 12 months. For incidence reporting, the items that the 'nurses perceived for communication among clinicians as fair' had a means of 3.23(±0.40) and the 'overall evaluation of patient safety was a good' 3.34(±0.73). The nurses' perception of cooperation and collaboration between units were associated with the direct contact between the patient and the nurse. The frequency of incidence reporting was associated with the duration of working hours at the present hospital and also their work experience. The nurses' perception of hospital environment, organizational culture, and incidence reporting was above average and mostly associated with organizational culture.

  9. The short form of the fear survey schedule for children-revised (FSSC-R-SF): an efficient, reliable, and valid scale for measuring fear in children and adolescents.

    Science.gov (United States)

    Muris, Peter; Ollendick, Thomas H; Roelofs, Jeffrey; Austin, Kristin

    2014-12-01

    The present study examined the psychometric properties of the Short Form of the Fear Survey Schedule for Children-Revised (FSSC-R-SF) in non-clinical and clinically referred children and adolescents from the Netherlands and the United States. Exploratory as well as confirmatory factor analyses of the FSSC-R-SF yielded support for the hypothesized five-factor structure representing fears in the domains of (1) failure and criticism, (2) the unknown, (3) animals, (4) danger and death, and (5) medical affairs. The FSSC-R-SF showed satisfactory reliability and was capable of assessing gender and age differences in youths' fears and fearfulness that have been documented in previous research. Further, the convergent validity of the scale was good as shown by substantial and meaningful correlations with the full-length FSSC-R and alternative childhood anxiety measures. Finally, support was found for the discriminant validity of the scale. That is, clinically referred children and adolescents exhibited higher scores on the FSSC-R-SF total scale and most subscales as compared to their non-clinical counterparts. Moreover, within the clinical sample, children and adolescents with a major anxiety disorder generally displayed higher FSSC-R-SF scores than youths without such a diagnosis. Altogether, these findings indicate that the FSSC-R-SF is a brief, reliable, and valid scale for assessing fear sensitivities in children and adolescents. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. The K-SF-42

    Directory of Open Access Journals (Sweden)

    Aurelio José Figueredo

    2017-02-01

    Full Text Available The purpose of the present article is to propose an alternative short form for the 199-item Arizona Life History Battery (ALHB, which we are calling the K-SF-42, as it contains 42 items as compared with the 20 items of the Mini-K, the short form that has been in greatest use for the past decade. These 42 items were selected from the ALHB, unlike those of the Mini-K, making direct comparisons of the relative psychometric performance of the two alternative short forms a valid and instructive exercise. A series of secondary data analyses were performed upon a recently completed five-nation cross-cultural survey, which was originally designed to assess the role of life history strategy in the etiology of interpersonal aggression. Only data from the ALHB that were collected in all five cross-cultural replications were used for the present analyses. The single immediate objective of this secondary data analysis was producing the K-SF-42 such that it would perform optimally across all five cultures sampled, and perhaps even generalize well to other modern industrial societies not currently sampled as a result of the geographic breadth of those included in the present study. A novel method, based on the use of the Cross-Sample Geometric Mean as a criterion for item selection, was used for generating such a cross-culturally valid short form.

  11. Ricostruzione di una scena urbana 3D utilizzando VisualSfM.

    Directory of Open Access Journals (Sweden)

    Laura Inzerillo

    2013-10-01

    Full Text Available Le tecniche di computer vision oggi danno la possibilità di costruire in maniera rapida e automatica modelli 3D dettagliati a partire da dataset fotografici. La comunità accademica ha visto una crescente attenzione alla ricostruzione 3D a scala urbana. Tra i vari strumenti oggi a disposizione spicca VisualSfM sviluppato dall’università di Washingthon e Google. Si tratta di una Interfaccia grafica open source strutturata in algoritmi dedicati alla tecnica di Structure from Motion (SfM. VisualSfM utilizza un estrattore di features chiamato SIFTGPU e un algoritmo di Bundle Adjustment Multicore. Inoltre è possibile ottenere una nuvola di punti densa utilizzando gli algoritmi CMVS/PMVS2. La finalità di questo studio è di verificare l’accuratezza metrica delle ricostruzioni attraverso l’utilizzo integrato di VisualSfM e CMVS/PMVS2. L’approccio quindi è stato testato su diversi dataset di una certa entità strutturati da collezioni fotografiche ragionate. 

  12. Complications among colorectal cancer survivors: SF-6D preference-weighted quality of life scores.

    Science.gov (United States)

    Hornbrook, Mark C; Wendel, Christopher S; Coons, Stephen Joel; Grant, Marcia; Herrinton, Lisa J; Mohler, M Jane; Baldwin, Carol M; McMullen, Carmit K; Green, Sylvan B; Altschuler, Andrea; Rawl, Susan M; Krouse, Robert S

    2011-03-01

    Societal preference-weighted health-related quality of life (HRQOL) scores enable comparing multidimensional health states across diseases and treatments for research and policy. To assess the effects of living with a permanent intestinal stoma, compared with a major bowel resection, among colorectal cancer (CRC) survivors. Cross-sectional multivariate linear regression analysis to explain preference-weighted HRQOL scores. In all, 640 CRC survivors (≥ 5 years) from 3 group model health maintenance organizations; ostomates and nonostomates with colorectal resections for CRC were matched on gender, age (± 5 years), time since diagnosis, and tumor site (rectum vs. colon). SF-6D scoring system was applied to Medical Outcomes Study Short Form-36 version 2 (SF-36v2); City of Hope Quality of Life-Ostomy; and Charlson-Deyo comorbidity index. Survey of CRC survivors linked to respondents' clinical data extracted from health maintenance organization files. Response rate was 52%. Ostomates and nonostomates had similar sociodemographic characteristics. Mean SF-6D score was 0.69 for ostomates, compared with 0.73 for nonostomates (P ostomy after other factors were taken into account. Surgical complications, comorbidities, and metastatic disease lowered the preference-weighted HRQOL of CRC survivors with and without ostomies. Further research to understand and reduce late complications from CRC surgeries as well as associated depression is warranted.

  13. A cross-cultural study of organizational factors on safety: Japanese vs. Taiwanese oil refinery plants.

    Science.gov (United States)

    Hsu, Shang Hwa; Lee, Chun-Chia; Wu, Muh-Cherng; Takano, Kenichi

    2008-01-01

    This study attempts to identify idiosyncrasies of organizational factors on safety and their influence mechanisms in Taiwan and Japan. Data were collected from employees of Taiwanese and Japanese oil refinery plants. Results show that organizational factors on safety differ in the two countries. Organizational characteristics in Taiwanese plants are highlighted as: higher level of management commitment to safety, harmonious interpersonal relationship, more emphasis on safety activities, higher devotion to supervision, and higher safety self-efficacy, as well as high quality of safety performance. Organizational characteristics in Japanese plants are highlighted as: higher level of employee empowerment and attitude towards continuous improvement, more emphasis on systematic safety management approach, efficient reporting system and teamwork, and high quality of safety performance. The casual relationships between organizational factors and workers' safety performance were investigated using structural equation modeling (SEM). Results indicate that the influence mechanisms of organizational factors in Taiwan and Japan are different. These findings provide insights into areas of safety improvement in emerging countries and developed countries respectively.

  14. Factor Analysis and Framework Development for Incorporating Public Trust on Nuclear Safety issues

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Seongkyung; Lee, Gyebong [The Myongji Univ., Seoul (Korea, Republic of); Lee, Gihyung; Lee, Gyehwi; Jeong, Jina [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2014-05-15

    The Korea Institute of Nuclear Safety (KINS), a regulatory expert organization in charge of nuclear safety in Korea, realized that a more fundamental and systematic analysis of activities is needed to actively meet the greater variety of concerns people have and increase the reliability of the results of regulation. Nuclear safety, a highly specialized field, has previously been discussed primarily from the viewpoint of the engineers who deal with the technology, but now 'public trust in nuclear safety' has to be viewed from the standpoint of the general public and from the socio-cultural perspective. Specific measures must be taken to examine which factors affect public trust and how we can secure and reproduce those factors to gain it. Also, an efficient system for incorporating public trust in nuclear safety must be established. In this study, various case studies were examined to identify the factors that affect public trust in nuclear safety. First, nuclear safety laws and information disclosure systems of major countries were examined by investigating data and conducting in-depth interviews. To explore a public framework concerning nuclear safety, big data of social media were analyzed. Also, Q methodology was used to analyze the risk schemata of the opinion leaders living in areas near nuclear power plants. Several surveys were conducted to analyze the amount of trust the public had in nuclear safety as well as their awareness of nuclear safety issues. Based on these analyses, factors affecting public trust in nuclear safety were extracted, and measures to build systems incorporating public trust in nuclear safety were proposed. This study addresses the public trust in nuclear safety on condition that the safety is ensured technically and mechanically.

  15. Factor Analysis and Framework Development for Incorporating Public Trust on Nuclear Safety issues

    International Nuclear Information System (INIS)

    Cho, Seongkyung; Lee, Gyebong; Lee, Gihyung; Lee, Gyehwi; Jeong, Jina

    2014-01-01

    The Korea Institute of Nuclear Safety (KINS), a regulatory expert organization in charge of nuclear safety in Korea, realized that a more fundamental and systematic analysis of activities is needed to actively meet the greater variety of concerns people have and increase the reliability of the results of regulation. Nuclear safety, a highly specialized field, has previously been discussed primarily from the viewpoint of the engineers who deal with the technology, but now 'public trust in nuclear safety' has to be viewed from the standpoint of the general public and from the socio-cultural perspective. Specific measures must be taken to examine which factors affect public trust and how we can secure and reproduce those factors to gain it. Also, an efficient system for incorporating public trust in nuclear safety must be established. In this study, various case studies were examined to identify the factors that affect public trust in nuclear safety. First, nuclear safety laws and information disclosure systems of major countries were examined by investigating data and conducting in-depth interviews. To explore a public framework concerning nuclear safety, big data of social media were analyzed. Also, Q methodology was used to analyze the risk schemata of the opinion leaders living in areas near nuclear power plants. Several surveys were conducted to analyze the amount of trust the public had in nuclear safety as well as their awareness of nuclear safety issues. Based on these analyses, factors affecting public trust in nuclear safety were extracted, and measures to build systems incorporating public trust in nuclear safety were proposed. This study addresses the public trust in nuclear safety on condition that the safety is ensured technically and mechanically

  16. SF6-alternative gases for application in gas-insulated switchgear

    Science.gov (United States)

    Li, Xingwen; Zhao, Hu; Murphy, Anthony B.

    2018-04-01

    The environmental problems caused by greenhouse gases have received unprecedented attention. Sulfur hexafluoride (SF6), which is the preferred gas for use in gas-insulated switchgear (circuit breakers, disconnect switches, etc. for high-voltage electrical circuits), has a very high global warming potential, and there is a large international effort to find alternative gases. Recently, this effort has made important progress, with promising alternative gases being identified and tested. An overview, in particular the current state of the art, of the study of SF6-alternative gases is presented in the paper. The review focuses on the application of the SF6-alternative gases in gas-insulated switchgear, with detailed analysis of calculations and measurements of their basic physical properties, dielectric strengths, and arc-quenching capabilities. Finally, a discussion of and perspectives on current research and future research directions are presented.

  17. Factors associated with the enactment of safety belt and motorcycle helmet laws.

    Science.gov (United States)

    Law, Teik Hua; Noland, Robert B; Evans, Andrew W

    2013-07-01

    It has been shown that road safety laws, such as motorcycle helmet and safety belt laws, have a significant effect in reducing road fatalities. Although an expanding body of literature has documented the effects of these laws on road safety, it remains unclear which factors influence the likelihood that these laws are enacted. This study attempts to identify the factors that influence the decision to enact safety belt and motorcycle helmet laws. Using panel data from 31 countries between 1963 and 2002, our results reveal that increased democracy, education level, per capita income, political stability, and more equitable income distribution within a country are associated with the enactment of road safety laws. © 2012 Society for Risk Analysis.

  18. Is there regional variation in the SF-36 scores of Canadian adults?

    Science.gov (United States)

    Hopman, Wilma M; Berger, Claudie; Joseph, Lawrence; Towheed, Tanveer; Anastassiades, Tassos; Tenenhouse, Alan; Poliquin, Suzette; Brown, Jacques P; Murray, Timothy M; Adachi, Jonathan D; Hanley, David A; Papadimitropoulos, Emmanuel A

    2002-01-01

    Canadian normative data for the Medical Outcomes Study 36-item short form (SF-36) have recently been published. However, there is evidence from other countries to suggest that regional variation in health-related quality of life (HRQOL) may exist. We therefore examined the SF-36 data from nine Canadian centres for evidence of systematic differences. Bayesian hierarchical modelling was used to compare the differences in the eight SF-36 domains and the two summary component scores within each of the age and gender strata across the nine sites. Five domains and the two summary component scores showed little clinically important variation. Other than a small number of exceptions, there was little overall evidence of HRQOL differences across most domains and across most sites. Our finding of only a few small differences suggests that there is no need to develop region-specific Canadian normative data for the SF-36 health survey.

  19. Refurbishment and retrofitting of SF6 gas storage tanks of the pelletron accelerator

    International Nuclear Information System (INIS)

    Reddy, G.R.; Datar, V.M.; Parulekar, Y.M.

    2015-01-01

    The BARC-TIFR Pelletron Accelerator Facility has completed more than twenty six years of successful round-the-clock operation, serving diverse users from institutions within and outside DAE. The main accelerating structure and associated subsystems are housed in the accelerator tank under SF 6 gas medium. During maintenance of the accelerator, the SF 6 gas present in the accelerator tank is transferred in the four storage tanks located on the terrace of the building open to outside environment. These four storage tanks (with ∼ 1/4th of the main tank volume each) are ∼ 4.27 m in diameter and ∼ 10 m in height each and are supported on RCC ring beams which are monolithically connected with the RCC structure below. Over the years, the anchor bolts and the base plates of support structure of storage tanks were found corroded and the foundation RCC ring beam indicated a few corrosion cracks. Health assessment of relevant structures and components were carried out. Considering the limitations of existing anchorage and also giving due considerations for reparability and replaceability, a new anchorage system was designed. The entire refurbishment and retrofitting works pertaining to the four SF 6 gas storage tanks was executed in a time bound manner to comply with the then PASC (Particle Accelerator Safety Committee) recommendations successfully, without disrupting the operations of the round-the-clock running Pelletron Accelerator facility. In addition, the thickness measurements for the storage tanks were performed. The relief valves and rupture disc assemblies across the storage tanks were replaced and reinstalled after introducing appropriate manual valves as suggested by the PASC. A new test set up was fabricated to perform pneumatic testing at the recommended pressure off-line for these relief valves and rupture disc assemblies prior to reinstallation. This paper describes the comprehensive rehabilitation and retrofitting procedures that were carried out at the

  20. A comparison between spectra of runaway electron beams in SF{sub 6} and air

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Cheng; Wang, Ruexue; Yan, Ping; Shao, Tao, E-mail: st@mail.iee.ac.cn [Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing 100190 (China); Key Laboratory of Power Electronics and Electric Drive, Chinese Academy of Sciences, Beijing 100190 (China); Tarasenko, Victor [Institute of High Current Electronics, 2/3 Akademichesky Ave., Tomsk 634055 (Russian Federation); National Research Tomsk State University, 36 Lenin Ave., Tomsk 634050 (Russian Federation); Gu, Jianwei [Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing 100190 (China); Baksht, Evgenii [Institute of High Current Electronics, 2/3 Akademichesky Ave., Tomsk 634055 (Russian Federation)

    2015-12-15

    Runaway electron (RAE) with extremely high-energy plays important role on the avalanche propagation, streamer formation, and ionization waves in nanosecond-pulse discharges. In this paper, the generation of a supershort avalanche electron beam (SAEB) in SF{sub 6} and air in an inhomogeneous electric field is investigated. A VPG-30-200 generator with a pulse rise time of ∼1.6 ns and a full width at half maximum of 3–5 ns is used to produce RAE beams. The SAEBs in SF{sub 6} and air are measured by using aluminum foils with different thicknesses. Furthermore, the SAEB spectra in SF{sub 6} and air at pressures of 7.5 Torr, 75 Torr, and 750 Torr are compared. The results showed that amplitude of RAE beam current generated at the breakdown in SF{sub 6} was approximately an order of magnitude less than that in air. The energy of SAEB in air was not smaller than that in SF{sub 6} in nanosecond-pulse discharges under otherwise equal conditions. Moreover, the difference between the maximum energy of the electron distributions in air and SF{sub 6} decreased when the rise time of the voltage pulse increased. It was because the difference between the breakdown voltages in air and SF{sub 6} decreased when the rise time of the voltage pulse increased.

  1. A Study on the Holding Capacity Safety Factors for Torpedo Anchors

    Directory of Open Access Journals (Sweden)

    Luís V. S. Sagrilo

    2012-01-01

    Full Text Available The use of powerful numerical tools based on the finite-element method has been improving the prediction of the holding capacity of fixed anchors employed by the offshore oil industry. One of the main achievements of these tools is the reduction of the uncertainty related to the holding capacity calculation of these anchors. Therefore, it is also possible to reduce the values of the associated design safety factors, which have been calibrated relying on models with higher uncertainty, without impairing the original level of structural safety. This paper presents a study on the calibration of reliability-based safety factors for the design of torpedo anchors considering the statistical model uncertainty evaluated using results from experimental tests and their correspondent finite-element-based numerical predictions. Both working stress design (WSD and load and resistance factors design (LRFD design methodologies are investigated. Considering the WSD design methodology, the single safety is considerably lower than the value typically employed in the design of torpedo anchors. Moreover, a LRFD design code format for torpedo anchors is more appropriate since it leads to designs having less-scattered safety levels around the target value.

  2. A quantitative assessment of organizational factors affecting safety using a system dynamics model

    International Nuclear Information System (INIS)

    Yoo, J. K.; Yoon, T. S.

    2003-01-01

    The purpose of this study is to develop a system dynamics model for the assessment of organizational and human factors in the nuclear power plant safety. Previous studies are classified into two major approaches. One is the engineering approach such as ergonomics and Probabilistic Safety Assessment (PSA). The other is socio-psychology one. Both have contributed to find organizational and human factors and increased nuclear safety However, since these approaches assume that the relationship among factors is independent they do not explain the interactions between factors or variables in NPP's. To overcome these restrictions, a system dynamics model, which can show causal relations between factors and quantify organizational and human factors, has been developed. Operating variables such as degree of leadership, adjustment of number of employee, and workload in each department, users can simulate various situations in nuclear power plants in the organization side. Through simulation, user can get an insight to improve safety in plants and to find managerial tools in the organization and human side

  3. The impact of SF3B1 mutations in CLL on the DNA-damage response

    DEFF Research Database (Denmark)

    Te Raa, G D; Derks, I A M; Navrkalova, V

    2015-01-01

    Mutations or deletions in TP53 or ATM are well-known determinants of poor prognosis in chronic lymphocytic leukemia (CLL), but only account for approximately 40% of chemo-resistant patients. Genome-wide sequencing has uncovered novel mutations in the splicing factor sf3b1, that were in part assoc...

  4. Electron-transport, ionization, attachment, and dissociation coefficients in SF6 and its mixtures

    International Nuclear Information System (INIS)

    Phelps, A.V.; Van Brunt, R.J.

    1988-01-01

    An improved set of electron-collision cross sections is derived for SF 6 and used to calculate transport, ionization, attachment, and dissociation coefficients for pure SF 6 and mixtures of SF 6 with N 2 , O 2 , and Ne. The SF 6 cross sections differ from previously published sets primarily at very low and high electron energies. At energies below 0.03 eV the attachment cross section is adjusted to fit recent electron swarm experiments, while the elastic momentum transfer cross section is increased to the theoretical limit. At high energies an allowance is made for the excitation of highly excited levels as observed in electron beam experiments. The cross-section sets used for the admixed gases have previously been published. Electron kinetic energy distributions computed from numerical solutions of the electron-transport (Boltzmann) equation using the two-term, spherical harmonic expansion approximation were used to obtain electron-transport and reaction coefficients as functions of E/N and the fractional concentration of SF 6 . Here E is the electric field strength and N is the gas number density. Attachment rate data for low concentrations of SF 6 in N 2 are used to test the attachment cross sections. Particular attention is given to the calculation of transport and reaction coefficients at the critical E/N = (E/N)/sub c/ at which the ionization and attachment rates are equal

  5. Comparison of Sulfur Hexafluoride (SF6) and Air Tamponade in Noniridectomized Descemet Membrane Endothelial Keratoplasty.

    Science.gov (United States)

    Einan-Lifshitz, Adi; Sorkin, Nir; Boutin, Tanguy; Showail, Mahmood; Borovik, Armand; Jamshidi, Farzad; Chan, Clara C; Rootman, David S

    2018-03-01

    To compare the efficacy and safety of 20% sulfur hexafluoride gas (SF6) and air tamponade in patients who underwent noniridectomized Descemet membrane endothelial keratoplasty (DMEK). A retrospective chart review of patients who underwent DMEK with either air or SF6 tamponade: 41 eyes received air tamponade (group 1) and 41 received SF6 tamponade (group 2). Best spectacle-corrected visual acuity, endothelial cell density, and complications including graft detachment and elevated intraocular pressure were compared. The mean follow-up time was 8 ± 4 months in group 1 and 3 ± 2 months in group 2. Mean best spectacle-corrected visual acuity improved from 1.12 ± 0.88 to 0.64 ± 0.78 logarithm of the minimum angle of resolution (logMAR) in group 1 (P = 0.009) and from 1.00 ± 0.78 to 0.62 ± 0.53 logMAR in group 2 (P = 0.006). The graft detachment rate was 39% (16 eyes) in group 1 and 42% (17 eyes) in group 2 (P = 0.822). The rate of graft detachment larger than one third of the graft area was 17% in group 1 and 20% in group 2 (P = 0.775). Rebubbling was performed in 26.8% and 20% of eyes in group 1 and 2, respectively (P = 0.43). Average endothelial cell loss was 32% in group 1 and 33% in group 2 (P = 0.83). In the immediate postoperative period, elevated intraocular pressure was observed in 2 eyes (5%) in group 1 and in 4 eyes (10%) in group 2 (P = 0.4). There was 1 primary graft failure in each group. Use of air with it being readily available and short acting is a good method of Descemet membrane tamponade in noniridectomized DMEK.

  6. Patient safety in the operating room: an intervention study on latent risk factors

    Directory of Open Access Journals (Sweden)

    van Beuzekom Martie

    2012-06-01

    Full Text Available Abstract Background Patient safety is one of the greatest challenges in healthcare. In the operating room errors are frequent and often consequential. This article describes an approach to a successful implementation of a patient safety program in the operating room, focussing on latent risk factors that influence patient safety. We performed an intervention to improve these latent risk factors (LRFs and increase awareness of patient safety issues amongst OR staff. Methods Latent risk factors were studied using a validated questionnaire applied to the OR staff before and after an intervention. A pre-test/post-test control group design with repeated measures was used to evaluate the effects of the interventions. The staff from one operating room of an university hospital acted as the intervention group. Controls consisted of the staff of the operating room in another university hospital. The outcomes were the changes in LRF scores, perceived incident rate, and changes in incident reports between pre- and post-intervention. Results Based on pre-test scores and participants’ key concerns about organizational factors affecting patient safety in their department the intervention focused on the following LRFs: Material Resources, Training and Staffing Recourses. After the intervention, the intervention operating room - compared to the control operating room - reported significantly fewer problems on Material Resources and Staffing Resources and a significantly lower score on perceived incident rate. The contribution of technical factors to incident causation decreased significantly in the intervention group after the intervention. Conclusion The change of state of latent risk factors can be measured using a patient safety questionnaire aimed at these factors. The change of the relevant risk factors (Material and Staffing resources concurred with a decrease in perceived and reported incident rates in the relevant categories. We conclude that

  7. Consensus achievement of leadership, organisational and individual factors that influence safety climate: Implications for nursing management.

    Science.gov (United States)

    Fischer, Shelly A; Jones, Jacqueline; Verran, Joyce A

    2018-01-01

    To validate a framework of factors that influence the relationship of transformational leadership and safety climate, and to enable testing of safety chain factors by generating hypotheses regarding their mediating and moderating effects. Understanding the patient safety chain and mechanisms by which leaders affect a strong climate of safety is essential to transformational leadership practice, education, and research. A systematic review of leadership and safety literature was used to develop an organising framework of factors proposed to influence the climate of safety. A panel of 25 international experts in leadership and safety engaged a three-round modified Delphi study with Likert-scored surveys. Eighty per cent of participating experts from six countries were retained to the final survey round. Consensus (>66% agreement) was achieved on 40 factors believed to influence safety climate in the acute care setting. Consensus regarding specific factors that play important roles in an organisation's climate of safety can be reached. Generally, the demonstration of leadership commitment to safety is key to cultivating a culture of patient safety. Transformational nurse leaders should consider and employ all three categories of factors in daily leadership activities and decision-making to drive a strong climate of patient safety. © 2017 John Wiley & Sons Ltd.

  8. 48 CFR 53.236-2 - Architect-engineer services (SF's 252 and 330).

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Architect-engineer... ACQUISITION REGULATION (CONTINUED) CLAUSES AND FORMS FORMS Prescription of Forms 53.236-2 Architect-engineer...-engineer and related services: (a) SF 252 (Rev. 10/83), Architect-Engineer Contract. SF 252 is prescribed...

  9. Alteration of the SETBP1 gene and splicing pathway genes SF3B1, U2AF1, and SRSF2 in childhood acute myeloid leukemia.

    Science.gov (United States)

    Choi, Hyun-Woo; Kim, Hye-Ran; Baek, Hee-Jo; Kook, Hoon; Cho, Duck; Shin, Jong-Hee; Suh, Soon-Pal; Ryang, Dong-Wook; Shin, Myung-Geun

    2015-01-01

    Recurrent somatic SET-binding protein 1 (SETBP1) and splicing pathway gene mutations have recently been found in atypical chronic myeloid leukemia and other hematologic malignancies. These mutations have been comprehensively analyzed in adult AML, but not in childhood AML. We investigated possible alteration of the SETBP1, splicing factor 3B subunit 1 (SF3B1), U2 small nuclear RNA auxiliary factor 1 (U2AF1), and serine/arginine-rich splicing factor 2 (SRSF2) genes in childhood AML. Cytogenetic and molecular analyses were performed to reveal chromosomal and genetic alterations. Sequence alterations in the SETBP1, SF3B1, U2AF1, and SRSF2 genes were examined by using direct sequencing in a cohort of 53 childhood AML patients. Childhood AML patients did not harbor any recurrent SETBP1 gene mutations, although our study did identify a synonymous mutation in one patient. None of the previously reported aberrations in the mutational hotspot of SF3B1, U2AF1, and SRSF2 were identified in any of the 53 patients. Alterations of the SETBP1 gene or SF3B1, U2AF1, and SRSF2 genes are not common genetic events in childhood AML, implying that the mutations are unlikely to exert a driver effect in myeloid leukemogenesis during childhood.

  10. Abnormal polarity effect in nanosecond-pulse breakdown of SF6 and nitrogen

    International Nuclear Information System (INIS)

    Shao, Tao; Tarasenko, Victor F.; Zhang, Cheng; Beloplotov, Dmitry S.; Yang, Wenjin; Lomaev, Mikhail I.; Zhou, Zhongsheng; Sorokin, Dmitry A.; Yan, Ping

    2014-01-01

    The breakdown of gas gaps in an inhomogeneous electric field at subnanosecond and nanosecond voltage pulse rise times are studied, and the famous polarity effect in point-to-plane gaps is investigated. It is shown that at a voltage pulse rise time of ∼0.5 ns, the inversion of polarity effect takes place not only in electronegative gases such as SF 6 , but also occurs in electropositive nitrogen. The inversion of polarity effect is related to a delay of electron emission from the plane cathode on arrival of the ionization wave front anode to the cathode. It is found that with a voltage pulse rise time of ∼0.5 ns, the inversion of polarity effect occurs at SF 6 and SF 6 –N 2 pressures of 0.25 MPa and lower, and with a voltage pulse rise time of 15 ns, at a SF 6 pressure lower than 0.12 MPa.

  11. An Efficient SF-ISF Approach for the Slepian-Wolf Source Coding Problem

    Directory of Open Access Journals (Sweden)

    Tu Zhenyu

    2005-01-01

    Full Text Available A simple but powerful scheme exploiting the binning concept for asymmetric lossless distributed source coding is proposed. The novelty in the proposed scheme is the introduction of a syndrome former (SF in the source encoder and an inverse syndrome former (ISF in the source decoder to efficiently exploit an existing linear channel code without the need to modify the code structure or the decoding strategy. For most channel codes, the construction of SF-ISF pairs is a light task. For parallelly and serially concatenated codes and particularly parallel and serial turbo codes where this appear less obvious, an efficient way for constructing linear complexity SF-ISF pairs is demonstrated. It is shown that the proposed SF-ISF approach is simple, provenly optimal, and generally applicable to any linear channel code. Simulation using conventional and asymmetric turbo codes demonstrates a compression rate that is only 0.06 bit/symbol from the theoretical limit, which is among the best results reported so far.

  12. Effects of the safety factor on ion temperature gradient modes

    International Nuclear Information System (INIS)

    Wang, A.K.; Dong, J.Q.; Sanuki, H.; Itoh, K.

    2003-01-01

    A model for the ion temperature gradient (ITG) driven instability is derived from Braginskii magnetohydrodynamic equations of ions. The safety factor q in a toroidal plasma is introduced into the model through the current density J parallel . The effects of q or J parallel on both the ITG instability in k perpendicular and k parallel spectra and the critical stability thresholds are studied. It is shown that the current density // J or the safety factor q plays an important role in stabilizing the ITG instability. (author)

  13. Relationship between organizational factors, safety culture and PSA in nuclear power plant operations

    International Nuclear Information System (INIS)

    Joksimovich, V.; Orvis, D.D.

    1997-01-01

    There are four nuclear safety imperatives or ''4Ms'': machine (hardware, design, QA/QC), milieux (operating conditions, environment, natural phenomena), man (human reliability) and management (organizational and management influences). Nuclear safety evaluations as well as evolution of its most powerful tool, Probabilistic Safety Assessment (PSA), followed chronologically the 4M constituents. The nuclear industry worldwide, and the nuclear safety regulators in particular, have been preoccupied with the first M almost to the point of obsession with belated and only intuitive interest in the third and fourth M (human dimension). Human factors or economics in the nuclear industry was an afterthought. Human reliability was essentially born in the aftermath of the Three Mile Island (TMI) accident. Impact of organizational factors on nuclear safety is only in the early stages of R and D. This paper describes some of the concepts being pursued by APG to link organizational factors and safety culture to Human Reliability Analysis (HRA) and to integrate such into probabilistic safety assessment (PSA), e.g. [APG, 1993]. (author). 11 refs, 4 figs, 1 tab

  14. Safety climate in university and college laboratories: impact of organizational and individual factors.

    Science.gov (United States)

    Wu, Tsung-Chih; Liu, Chi-Wei; Lu, Mu-Chen

    2007-01-01

    Universities and colleges serve to be institutions of education excellence; however, problems in the areas of occupational safety may undermine such goals. Occupational safety must be the concern of every employee in the organization, regardless of job position. Safety climate surveys have been suggested as important tools for measuring the effectiveness and improvement direction of safety programs. Thus, this study aims to investigate the influence of organizational and individual factors on safety climate in university and college laboratories. Employees at 100 universities and colleges in Taiwan were mailed a self-administered questionnaire survey; the response rate was 78%. Multivariate analysis of variance revealed that organizational category of ownership, the presence of a safety manager and safety committee, gender, age, title, accident experience, and safety training significantly affected the climate. Among them, accident experience and safety training affected the climate with practical significance. The authors recommend that managers should address important factors affecting safety issues and then create a positive climate by enforcing continuous improvements.

  15. Identification and Molecular Characterisation of a Novel Mu-Like Bacteriophage, SfMu, of Shigella flexneri.

    Directory of Open Access Journals (Sweden)

    Richa Jakhetia

    Full Text Available S. flexneri is the leading cause of bacillary dysentery in the developing countries. Several temperate phages originating from this host have been characterised. However, all S. flexneri phages known to date are lambdoid phages, which have the ability to confer the O-antigen modification of their host. In this study, we report the isolation and characterisation of a novel Mu-like phage from a serotype 4a strain of S. flexneri. The genome of phage SfMu is composed of 37,146 bp and is predicted to contain 55 open reading frames (orfs. Comparative genome analysis of phage SfMu with Mu and other Mu-like phages revealed that SfMu is closely related to phage Mu, sharing >90% identity with majority of its proteins. Moreover, investigation of phage SfMu receptor on the surface of the host cell revealed that the O-antigen of the host serves as the receptor for the adsorption of phage SfMu. This study also demonstrates pervasiveness of SfMu phage in S. flexneri, by identifying complete SfMu prophage strains of serotype X and Y, and remnants of SfMu in strains belonging to 4 other serotypes, thereby indicating that transposable phages in S. flexneri are not uncommon. The findings of this study contribute an advance in our current knowledge of S. flexneri phages and will also play a key role in understanding the evolution of S. flexneri.

  16. A report on human factors in nuclear safety

    International Nuclear Information System (INIS)

    1983-03-01

    Following the Three Mile Island incident of 1979, studies were undertaken by the Atomic Energy Control Board (AECB), in-house and through outside consultants, to address the role of human factors in the regulatory process. This report by the Advisory Committee on Nuclear Safety (ACNS) comments briefly on these studies and offers suggestions which would promote a more formal treatment of human factors by the AECB

  17. Classification analysis of organization factors related to system safety

    International Nuclear Information System (INIS)

    Liu Huizhen; Zhang Li; Zhang Yuling; Guan Shihua

    2009-01-01

    This paper analyzes the different types of organization factors which influence the system safety. The organization factor can be divided into the interior organization factor and exterior organization factor. The latter includes the factors of political, economical, technical, law, social culture and geographical, and the relationships among different interest groups. The former includes organization culture, communication, decision, training, process, supervision and management and organization structure. This paper focuses on the description of the organization factors. The classification analysis of the organization factors is the early work of quantitative analysis. (authors)

  18. Factors Associated with Health-Related Quality of Life in Korean Patients with Chronic Hepatitis C Infection Using the SF-36 and EQ-5D.

    Science.gov (United States)

    Jang, Eun Sun; Kim, Young Seok; Kim, Kyung-Ah; Lee, Youn Jae; Chung, Woo Jin; Kim, In Hee; Lee, Byung Seok; Jeong, Sook-Hyang

    2018-03-29

    This study aimed to describe the Health-related quality of life (HRQoL) outcomes for Korean chronic hepatitis C patients and to investigate the impact of patient and virus-related factors on HRQoL. HRQoL was assessed in 235 HCV-infected patients from 7 nationwide tertiary hospital, including those with liver cirrhosis and hepatocellular carcinoma (HCC), using the Shor-Form 36 (SF-36) version 2 and the European quality of life questionnaire-5 dimensions (EQ-5D-3L). The SF-36 physical (48.8±8.3) and mental (46.2±11.7) component summary scores of the HCV-infected patients were below normal limits. Of the eight domains, general health, vitality, and mental health tended to show low scores. Patients with decompensated cirrhosis had the lowest HRQoL, while HCC and chronic hepatitis patients had similar HRQoL results. The EQ-5D index was low (0.848±0.145) in the HCV infected patients. Multivariable analysis showed age ≤65 years, high monthly family income (>$2,641), low comorbidity score, and sustained virologic response (SVR) were independently associated with favorable HRQoL. HRQoL in Korean patients with chronic HCV infection was low and was affected by cirrhosis severity, SVR, and comorbidity as well as income, which had the strongest effect. Therefore, HRQoL may be improved by antiviral therapy with reasonable costs to prevent cirrhosis progression.

  19. SF6 laser remote sensing by CO2 laser DIAL lidar

    International Nuclear Information System (INIS)

    Parvin, P.; Basam, Z.; Zamanipour, Z.; Kariminezhad, H.; Boyook, N.; Borna, F.; Azari, T.; Eshragi, N.; Ataran, A.; Ghods Ahmad Zadeh, R.

    2004-01-01

    A DIAL system using tunable CO 2 laser has been demonstrated practically for remote sensing of SF 6 components in Mashad Shahid Motahhari Research Complex. Non toxic components of SF 6 as a rare isotope is studied to calibrate the lidar function in several conditions. The whole system enables us to detect ppm amounts of chemical gases as well as pollutants and poisonous species

  20. Mathematical models for prediction of safety factors for a simply ...

    African Journals Online (AJOL)

    From the results obtained, mathematical prediction models were developed using a least square regression analysis for bending, shear and deflection modes of failure considered in the study. The results showed that the safety factors for material, dead and live load are not unique, but they are influenced by safety index ...

  1. SF-1 (NR5A1) expression is stimulated by the PKA pathway and is essential for the PKA-induced activation of LIPE expression in Y-1 cells.

    Science.gov (United States)

    Kulcenty, K; Holysz, M; Trzeciak, W H

    2015-10-01

    In the adrenal cortex, corticotropin induces the expression of several genes encoding proteins involved in the synthesis and intracellular transport of steroid hormones via the protein kinase A (PKA) signalling pathway, and this process is mediated by steroidogenic factor-1 (SF-1). This study was designed to elucidate the influence of the PKA and PKC pathways on the expression of the SF-1 gene in mouse adrenocortical cells, line Y-1. It has also been attempted to answer the question whether or not SF-1 plays a role in the PKA-induced expression of LIPE gene encoding hormone-sensitive lipase/cholesteryl esterase, which supplies cholesterol for steroid hormone synthesis. In this study, we found that stimulation of the PKA pathway caused a significant increase in SF-1 expression, and that this effect was abolished by the PKA inhibitor, H89. Decreased SF-1 gene transcript levels were seen with the simultaneous activation of PKA and PKC, suggesting a possible interaction between the PKA and PKC pathways. It was also observed that SF-1 increased the transcriptional activity of the LIPE gene by interacting with the SF-1 response element located in promoter A. Moreover, transient silencing of SF-1 expression with specific siRNAs abolished PKA-stimulated transcription of the LIPE gene, indicating that SF-1 is an important regulator of LIPE expression in Y-1 cells and thus could play a role in the regulation of the cholesterol supply for adrenal steroidogenesis.

  2. Evaluation and cultural adaptation of a German version of the AIMS2-SF questionnaire (German AIMS2-SF).

    NARCIS (Netherlands)

    Rosemann, T.J.; Korner, T.; Wensing, M.J.P.; Schneider, A.; Szecsenyi, J.

    2005-01-01

    OBJECTIVES: The aim of the study was to examine the validity of a translated and culturally adapted version of the Arthritis Impact Measurement Scales 2, Short Form (AIMS2-SF) in patients suffering from osteoarthritis (OA) in primary care. METHODS: A structured procedure was used for the translation

  3. A quantitative assessment of organizational factors affecting safety using a system dynamics model

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, J. K. [Systemix Company, Seoul (Korea, Republic of); Yoon, T. S. [Korea Electric Power Research Institute (Korea, Republic of)

    2003-07-01

    The purpose of this study is to develop a system dynamics model for the assessment of organizational and human factors in the nuclear power plant safety. Previous studies are classified into two major approaches. One is the engineering approach such as ergonomics and Probabilistic Safety Assessment (PSA). The other is socio-psychology one. Both have contributed to find organizational and human factors and increased nuclear safety However, since these approaches assume that the relationship among factors is independent they do not explain the interactions between factors or variables in NPP's. To overcome these restrictions, a system dynamics model, which can show causal relations between factors and quantify organizational and human factors, has been developed. Operating variables such as degree of leadership, adjustment of number of employee, and workload in each department, users can simulate various situations in nuclear power plants in the organization side. Through simulation, user can get an insight to improve safety in plants and to find managerial tools in the organization and human side.

  4. Safety of Nuclear Power Plants: Commissioning and Operation. Specific Safety Requirements (Arabic Edition)

    International Nuclear Information System (INIS)

    2017-01-01

    This publication is a revision of IAEA Safety Standards Series No. NS-R-2, Safety of Nuclear Power Plants: Operation, and has been extended to cover the commissioning stage. It describes the requirements to be met to ensure the safe commissioning, operation, and transition from operation to decommissioning of nuclear power plants. Over recent years there have been developments in areas such as long term operation of nuclear power plants, plant ageing, periodic safety review, probabilistic safety analysis review and risk informed decision making processes. It became necessary to revise the IAEA’s Safety Requirements in these areas and to correct and/or improve the publication on the basis of feedback from its application by both the IAEA and its Member States. In addition, the requirements are governed by, and must apply, the safety objective and safety principles that are established in the IAEA Safety Standards Series No. SF-1, Fundamental Safety Principles. A review of Safety Requirements publications, initiated in 2011 following the accident in the Fukushima Daiichi nuclear power plant in Japan, revealed no significant areas of weakness but resulted in a small set of amendments to strengthen the requirements and facilitate their implementation. These are contained in the present publication.

  5. Measurement Development and Validation of the Family Supportive Supervisor Behavior Short-Form (FSSB-SF)

    Science.gov (United States)

    Hammer, Leslie B.; Kossek, Ellen Ernst; Bodner, Todd; Crain, Tori

    2013-01-01

    Recently, scholars have demonstrated the importance of Family Supportive Supervisor Behaviors (FSSB), defined as behaviors exhibited by supervisors that are supportive of employees’ family roles, in relation to health, well-being, and organizational outcomes. FSSB was originally conceptualized as a multidimensional, superordinate construct with four subordinate dimensions assessed with 14 items: emotional support, instrumental support, role modeling behaviors, and creative work-family management. Retaining one item from each dimension, two studies were conducted to support the development and use of a new FSSB-Short Form (FSSB-SF). Study 1 draws on the original data from the FSSB validation study of retail employees to determine if the results using the 14-item measure replicate with the shorter 4-item measure. Using data from a sample of 823 information technology professionals and their 219 supervisors, Study 2 extends the validation of the FSSB-SF to a new sample of professional workers and new outcome variables. Results from multilevel confirmatory factor analyses and multilevel regression analyses provide evidence of construct and criterion-related validity of the FSSB-SF, as it was significantly related to work-family conflict, job satisfaction, turnover intentions, control over work hours, obligation to work when sick, perceived stress, and reports of family time adequacy. We argue that it is important to develop parsimonious measures of work-family specific support to ensure supervisor support for work and family is mainstreamed into organizational research and practice. PMID:23730803

  6. Organizational factors and nuclear power plant safety

    International Nuclear Information System (INIS)

    Haber, S.B.

    1995-01-01

    There are many organizations in our society that depend on human performance to avoid incidents involving significant adverse consequences. As our culture and technology have become more sophisticated, the management of risk on a broad basis has become more and more critical. The safe operation of military facilities, chemical plants, airlines, and mass transit, to name a few, are substantially dependent on the performance of the organizations that operate those facilities. The nuclear power industry has, within the past 15 years, increased the attention given to the influence of human performance in the safe operation of nuclear power plants (NPP). While NPPs have been designed through engineering disciplines to intercept and mitigate events that could cause adverse consequences, it has been clear from various safety-related incidents that human performance also plays a dominant role in preventing accidents. Initial efforts following the 1979 Three Mile Island incident focused primarily on ergonomic factors (e.g., the best design of control rooms for maximum performance). Greater attention was subsequently directed towards cognitive processes involved in the use of NPP decision support systems and decision making in general, personnel functions such as selection systems, and the influence of work scheduling and planning on employees' performance. Although each of these approaches has contributed to increasing the safety of NPPS, during the last few years, there has been a growing awareness that particular attention must be paid to how organizational processes affect NPP personnel performance, and thus, plant safety. The direct importance of organizational factors on safety performance in the NPP has been well-documented in the reports on the Three Mile Island and Chernobyl accidents as well as numerous other events, especially as evaluated by the U.S. Nuclear Regulatory Commission (NRC)

  7. Safety review for human factors engineering and control rooms of nuclear power plants

    International Nuclear Information System (INIS)

    Yang Mengzhuo

    1998-01-01

    Safety review for human factors engineering and control rooms of nuclear power plants (NPP) is in a forward position of science and technology, which began at American TMI severe accident and had been implemented in China. The importance and the significance of the safety review are expounded, the requirements of its scope and profundity are explained in detail. In addition, the situation of the technical document system for nuclear safety regulation on human factors engineering and control rooms of NPP in China is introduced briefly, on which the safety review is based

  8. A Study on the Allowable Safety Factor of Cut-Slopes for Nuclear Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Myung Soo; Yee, Eric [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2015-10-15

    In this study, the issues of allowable safety factor design criteria for cut-slopes in nuclear facilities is derived through case analysis, a proposed construction work slope design criteria that provides relatively detailed conditions can be applied in case of the dry season and some unclear parts of slope design criteria be modified in case of the rainy season. This safety factor can be further subdivided into two; normal and earthquake factors, a factor of 1.5 is applied for normal conditions and a factor of 1.2 is applied for seismic conditions. This safety factor takes into consideration the effect of ground water and rainfall conditions. However, no criteria for the case of cut-slope in nuclear facilities and its response to seismic conditions is clearly defined, this can cause uncertainty in design. Therefore, this paper investigates the allowable safety factor for cut-slopes in nuclear facilities, reviews conditions of both local and international cut-slope models and finally suggests an alternative method of analysis. It is expected that the new design criteria adequately ensures the stability of the cut-slope to reflect clear conditions for both the supervising and design engineers.

  9. 75 FR 5536 - Pipeline Safety: Control Room Management/Human Factors, Correction

    Science.gov (United States)

    2010-02-03

    ... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Parts...: Control Room Management/Human Factors, Correction AGENCY: Pipeline and Hazardous Materials Safety... following correcting amendments: PART 192--TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM...

  10. Development of safety factors to be used for evaluation of cracked nuclear components

    International Nuclear Information System (INIS)

    Brickstad, B.; Bergman, M.

    1996-10-01

    A modified concept for safety evaluation is introduced which separately accounts for the failure mechanisms fracture and plastic collapse. For application on nuclear components a set of safety factors are also proposed that retain the safety margins expressed in ASME, section III and XI. By performing comparative studies of the acceptance levels for surface cracks in pipes and a pressure vessel, it is shown that some of the anomalies connected with the old safety procedures are removed. It is the authors belief that the outlined safety evaluation procedure has the capability of treating cracks in a consistent way and that the procedure together with the proposed safety factors fulfill the basic safety requirements for nuclear components. Hopefully, it is possible in the near future to develop a probabilistic safety assessment procedure in Sweden, which enables a systematic treatment of uncertainties in the involved data. 14 refs

  11. Validade concorrente da versão Brasileira do SRS-22r com o Br-SF-36 Concurrent validity of the Brazilian version of SRS-22r with Br-SF-36

    Directory of Open Access Journals (Sweden)

    Giselle C. L. Rosanova

    2010-04-01

    Full Text Available CONTEXTUALIZAÇÃO: A validade concorrente, relevante na adaptação transcultural, refere-se à relação entre o desempenho do instrumento de interesse e o desempenho de instrumento semelhante com validade conhecida. OBJETIVO: Realizar a validação concorrente da versão brasileira do questionário revisado da Scoliosis Research Society (Br-SRS-22r com a versão brasileira do Short Form-36 (Br-SF-36. MÉTODOS: Foram selecionados 54 pacientes com escoliose idiopática com média de 19,9 anos (±7,7 e curvaturas com média de 31,6° (±20,5° graus Cobb, variando entre 10º e 92º. Os questionários tiveram seus resultados convertidos em escores, e a análise estatística correlacionou os domínios concorrentes utilizando o cálculo de coeficiente de Spearman. RESULTADOS: Os domínios de melhor correlação foram função do Br-SRS-22r com função física do Br-SF-36 (r=0,83 e dor do Br-SRS-22r com dor do Br-SF-36 (r=0,86. Entretanto, os domínios autoimagem e satisfação com o tratamento do Br-SRS-22r apresentaram baixa correlação com seus domínios concorrentes do Br-SF-36. DISCUSSÃO: Houve uma correlação satisfatória entre os questionários, sendo que as melhores correlações indicam maior semelhança nos parâmetros avaliados entre os respectivos instrumentos. As melhores correlações foram as dos domínios função e dor, não ocorrendo em saúde mental, possivelmente devido às dificuldades de interpretação de suas questões no Br-SF-36. Para os domínios autoimagem e satisfação com o tratamento do Br-SRS-22r, a correlação é pouco satisfatória por não serem especificamente abordados pelo SF-36. CONCLUSÃO: A versão brasileira do SRS-22r apresentou resultados satisfatórios para a validação concorrente com o Br-SF-36, sendo considerada válida para a versão adaptada à cultura brasileira.BACKGROUND: An important parameter in cross-cultural adaptations, and concurrent validity are the relationships between the

  12. Functionality of road safety devices – identification and analysis of factors

    Directory of Open Access Journals (Sweden)

    Jeliński Łukasz

    2017-01-01

    Full Text Available Road safety devices are designed to protect road users from the risk of injury or death. The principal type of restraint is the safety barrier. Deployed on sites with the highest risk of run-off-road accidents, safety barriers are mostly found on bridges, flyovers, central reservations, and on road edges which have fixed obstacles next to them. If properly designed and installed, safety barriers just as other road safety devices, should meet a number of functional features. This report analyses factors which may deteriorate functionality, ways to prevent this from happening and the thresholds for loss of road safety device functionality.

  13. Effect of the percentage of SF sub 6 (100%-10%-5%) on the decomposition of SF sub 6 -N sub 2 mixtures under negative dc coronas in the presence of water vapour or oxygen

    CERN Document Server

    Díaz, J; Casanovas, J

    2003-01-01

    Low SF sub 6 content SF sub 6 -N sub 2 mixtures have recently been proposed as a replacement for pure SF sub 6 in the insulation of gas insulated lines (GIL). Among the areas of investigation of such gas mixtures, their electrical decomposition under corona discharges must be studied considering the possible occurrence of such stress in GIL. This paper presents data concerning the decomposition of high-pressure SF sub 6 -N sub 2 (5 : 95) mixtures (400 kPa) submitted to negative dc coronas in the absence or presence of 0.3% H sub 2 O or 0.3% O sub 2. The chemical stability of these mixtures is compared with that of SF sub 6 -N sub 2 (10 : 90) mixtures or undiluted SF sub 6 investigated in the same conditions in a previous paper. The corona discharges were generated with a point-to-plane set-up and the gaseous by-products were assayed by gas chromatography at the end of each run carried out over a range of transported charge covering 0-13 C. The following by-products were detected and assayed: SOF sub 4 , SO su...

  14. The evolution of Sf. Gheorghe (Danube asymmetric deltaic lobe

    Directory of Open Access Journals (Sweden)

    Alfred VESPREMEANU-STROE

    2014-11-01

    Full Text Available The wave asymmetric Sf. Gheorghe lobe is the only active in the Danube delta where river mouth bar (and the associated barrier islands and spits continuously deployed a cyclic development for almost two millennia. During first stage, the Sf. Gheorghe distributary had a small discharge (with an order of magnitude lower than present which after that experienced a rapid increase in consequence of the successive avulsions of Împuţita (southern distributary of Sulina arm and Dunavăţ distributaries. Our morphological analyses together with the newly obtained chronology, revealed the multiple ridgesets structure of Sf. Gheorghe deltaic lobe. In fact, all ridgesets (10 follow a common morphodynamic pattern characterized by the cyclic succession of three stages: i subaqueous mouth bar development, ii barrier island emergence, iii barrier spit phase with several secondary spits derived from an updrift trunk ridge. The size of each ridgeset increased exponentially with every new cycle due to the constant lengthening of the coastline as the downdrift side of the lobe advances seaward through a series of progressively larger similar quadrilaterals, yielding to a constant enlargment of the delta front size. 

  15. [The Steel factor].

    Science.gov (United States)

    Cáceres-Cortés, J R

    1997-01-01

    Mice bearing mutations at either of two loci, dominant White spotting(W) or Steel(Sl), exhibit development defects in hematopoietic, melanocytic and germ cells. Genetics studies have shown that the SI locus encodes the Steel factor (SF), which is the ligand for the tyrosine kinase receptor c-kit, the product of the W locus. SF is synthesized in membrane-bound form and can be processed to produce a soluble form. Cell-cell interaction is important in the production of normal blood cells in vivo and in vitro and in the cellular expansion of leukemic cells. We discuss here how SF decreases the requirements in cell interaction for blast colony formation in acute myeloblastic leukemia (AML) and the presence of membrane-bound SF possibly contributes to the density-dependent growth of the AML blasts. We explain that SF is mainly a survival factor for hematopoietic cells, of little proliferative effect, which maintains CD34+ hematopoietic cells in an undifferentiated state. These properties would potentially allow the maintenance of hematopoietic cells in culture for the purpose of marrow purging or gene therapy. The activation of the c-kit signal transduction pathway may play a significant role in the development of many types of non-hematological malignancies by disrupting normal cell-cell interactions and allowing the growth of cancer cell populations. In summary, the properties of the SF indicate it has a role for survival signals during the process of normal differentiation, AML proliferation and in the maintenance of many c-kit+ tumors.

  16. Requirements to amend the main influence factors on the safety culture after fukushima accident

    International Nuclear Information System (INIS)

    Farcasiu, M.; Nitoi, M.

    2015-01-01

    The paper presents a general model that provides a framework for the safety culture assessment, creating the possibility to identify factors that can significantly influence the safety culture. The main safety culture influence factors (SCIF) used by model are the following: regulatory environment, organizational environment, worker characteristics, socio-political environment, national culture, organization history, business and technological characteristics. After the analysis of the deficiencies and weaknesses of SCIFc in evolution of the Fukushima accident, some issues that may become necessities and requirements to change and improve both the safety culture and safety of the nuclear installations were highlighted. For each influence factor were identified some requirements to amend. The results will emphasize the necesity of the human - technology - organization system assessment. Hence it was demonstrated that the safety culture results from the interaction of individuals with technology and with the organization. (authors)

  17. Micro computer aided beam transport for the SF cyclotron

    International Nuclear Information System (INIS)

    Honma, Toshihiro; Yamazaki, Tsutomu.

    1984-01-01

    An improvement of the beam transport system for the SF cyclotron is described. The system was designed to handle on-line alignment of the beam extracted from the SF cyclotron onto the optical axis of the transport line. It also enables to measure the beam emittance. The measurement of the emittance parameters is in particular necessary to calculate the beam optics. The calculation has been modified to become easy to handle. With the help of the computer-aided on-line beam profile measurement system, the operation of the beam transport system is very subservient to shorten the beam-tuning time and to improve the beam-transmission efficiency and the quality. (author)

  18. Low energy electron attachment to SF6 in N2, Ar, and Xe buffer gases

    International Nuclear Information System (INIS)

    Hunter, S.R.; Carter, J.G.; Christophorou, L.G.

    1989-01-01

    The electron attachment rate constants k/sub a/ for SF 6 have been measured in dilute mixtures of SF 6 in high pressure (>1 atm) N 2 , Ar, and Xe buffer gases at room temperature (T≅300 K) over a wide E/N range (electric field strength to gas number density ratio), corresponding to mean electron energies from near thermal electron energies (≅0.04 eV) to ≅4.3 eV. Particular attention has been paid to the effects of space charge distortion, molecular impurities, and changes in the electron energy distribution function on the measured electron attachment rate constant values at the lower E/N values in these mixtures. The present measured thermal electron attachment rate constants in SF 6 /N 2 and SF 6 /Xe gas mixtures are in excellent agreement with recent accurate measurements of these parameters in several SF 6 /buffer gas mixtures. At higher values, the present SF 6 /N 2 measurements are in fair agreement with previous measurements, while no previous measurements using Ar and Xe buffer gases have been published. These measurements have been used in numerical two term, spherical harmonic Boltzmann equation analyses of the electron motion in these gas mixtures to obtain the low energy ( 6 . The present derived electron attachment cross sections are compared with recently measured and derived nondissociative and dissociative electron attachment cross sections for SF 6

  19. Research on review technology for three key safety factors of periodic safety review (PSR) and its application to Qinshan Nuclear Power Plant

    International Nuclear Information System (INIS)

    Xu Shoulv; Yao Weida; Dou Yikang; Lin Shaoxuan; Cao Yenan; Zhou Quanfu; Zheng Jiong; Zhang Ming

    2009-04-01

    In 2001, after 10 years' operation, Qinshan Nuclear Power Plant (Q1) started to carry out periodic safety review (PSR) based on a nuclear safety guideline, Periodic Safety Review for Operational Nuclear Power Plants (HAF0312), issued by National Nuclear Safety Administration of China (NNSA). Entrusted by the owner of Q1, Shanghai Nuclear Engineering Research and Design Institute (SNERDI) implemented reviews of three key safety factors including safety analysis, equipment qualification and ageing. PSR was a challenging work in China at that time and through three years' research and practice, SNERDI summarized a systematic achievement for the review including review methodology, scoping, review contents and implementation steps, etc.. During the process of review for the three safety factors, totally 148 review reports and 341 recommendations for corrections were submitted to Q1. These reports and recommendations have provided guidance for correction actions as follow-up of PSR. This paper focuses on technical aspects to carry out PSR for the above-mentioned three safety factors, including review scoping, contents, methodology and main steps. The review technology and relevant experience can be taken for reference for other NPPs to carry out PSR. (authors)

  20. Modeling the factors affecting unsafe behavior in the construction industry from safety supervisors' perspective.

    Science.gov (United States)

    Khosravi, Yahya; Asilian-Mahabadi, Hassan; Hajizadeh, Ebrahim; Hassanzadeh-Rangi, Narmin; Bastani, Hamid; Khavanin, Ali; Mortazavi, Seyed Bagher

    2014-01-01

    There can be little doubt that the construction is the most hazardous industry in the worldwide. This study was designed to modeling the factors affecting unsafe behavior from the perspective of safety supervisors. The qualitative research was conducted to extract a conceptual model. A structural model was then developed based on a questionnaire survey (n=266) by two stage Structural Equation Model (SEM) approach. An excellent confirmed 12-factors structure explained about 62% of variances unsafe behavior in the construction industry. A good fit structural model indicated that safety climate factors were positively correlated with safety individual factors (Pconstruction workers' engagement in safe or unsafe behavior. In order to improve construction safety performance, more focus on the workplace condition is required.

  1. Human and organization factors: engineering operating safety into offshore structures

    International Nuclear Information System (INIS)

    Bea, Robert G.

    1998-01-01

    History indicates clearly that the safety of offshore structures is determined primarily by the humans and organizations responsible for these structures during their design, construction, operation, maintenance, and decommissioning. If the safety of offshore structures is to be preserved and improved, then attention of engineers should focus on to how to improve the reliability of the offshore structure 'system,' including the people that come into contact with the structure during its life-cycle. This article reviews and discusss concepts and engineering approaches that can be used in such efforts. Two specific human factor issues are addressed: (1) real-time management of safety during operations, and (2) development of a Safety Management Assessment System to help improve the safety of offshore structures

  2. Influence of organizational factors on safety

    International Nuclear Information System (INIS)

    Haber, S.B.; Metlay, D.S.; Crouch, D.A.

    1990-01-01

    There is a need for a better understanding of exactly how organizational management factors at a nuclear power plant (NPP) affect plant safety performance, either directly or indirectly, and how these factors might be observed, measured, and evaluated. The purpose of this research project is to respond to that need by developing a general methodology for characterizing these organizational and management factors, systematically collecting information on their status and integrating that information into various types of evaluative activities. Research to date has included the development of the Nuclear Organization and Management Analysis Concept (NOMAC) of a NPP, the identification of key organizational and management factors, and the identification of the methods for systematically measuring and analyzing the influence of these factors on performance. Most recently, two field studies, one at a fossil fuel plant and the other at a NPP, were conducted using the developed methodology. Results are presented from both studies highlighting the acceptability, practicality, and usefulness of the methods used to assess the influence of various organizational and management factors including culture, communication, decision-making, standardization, and oversight. 6 refs., 3 figs., 1 tab

  3. The Relationship Between Antecedent and Consequence Factors with Safety Behaviour in PT.X

    OpenAIRE

    Fitriani, Apris; Nawawiwetu, Erwin Dyah

    2017-01-01

    Background : Safety behaviour is an act worker to minimize the possibility of accidents in workplace. Based on the Antecedents-Behaviour-Consequence (ABC) theory, safety behaviour of worker related with the antecedent and consequence factors. Purpose : The purpose of this research was to study the association between antecedent and consequence factors with safety behaviour of workers in Ring Frame Unit Spinning II PT. X. Methods : This was an observational descriptive research with cross sect...

  4. A research framework of organizational factors on safety in the Republic of Korea

    International Nuclear Information System (INIS)

    Kwang Seok Lee

    1997-01-01

    Korean nuclear society is yet unfamiliar with the topic, 'organizational factors on safety', while having shown lots of accomplishments in the area of physical and human factors on safety. However, recent large-scale accidents in other technological areas illustrate the importance of managing organization factors on safety. Recently Korea Atomic Energy Research Institute (KAERI) started paying attention to this topic and is trying to establish a future research framework of organizational factors on safety. This paper tries to explain overall direction of the framework. Our framework, as managing organizational factors on safety, considers two kinds of areas: design of management systems, which implies a feed-forward system including organizational models; and operation of those systems, which implies a feedback system including management information and implementation systems. Our framework also considers the evolution stage of a management system. Management systems evolve from visibility stage to optimization stage. To optimize a management system, we should be able to control the system. To control the system, we should be able to see how the system is going. In addition, this paper tries to share some experience of KAERI on how organizational structure and culture affects organizational performance in R and D perspective. (author). 2 refs, 1 fig

  5. Human and organizational factors in nuclear safety

    International Nuclear Information System (INIS)

    Garcia, A.; Barrientos, M.; Gil, B.

    2015-01-01

    Nuclear installations are socio technical systems where human and organizational factors, in both utilities and regulators, have a significant impact on safety. Three Mile Island (TMI) accident, original of several initiatives in the human factors field, nevertheless became a lost opportunity to timely acquire lessons related to the upper tiers of the system. Nowadays, Spanish nuclear installations have integrated in their processes specialists and activities in human and organizational factors, promoted by the licensees After many years of hard work, Spanish installations have achieved a better position to face new challenges, such as those posed by Fukushima. With this experience, only technology-centered action plan would not be acceptable, turning this accident in yet another lost opportunity. (Author)

  6. Organisational factors. Their definition and influence on nuclear safety. Final report

    International Nuclear Information System (INIS)

    Baumont, G.; Wahlstroem, B.; Sola, R.; Williams, J.; Frischknecht, A.; Wilpert, B.; Rollenhagen, C.

    2000-12-01

    The importance of organisational factors in the operational safety and efficiency of nuclear power plants (NPP) has been recognised by many organisations around the world. Despite this recognition, however, there are as yet very few methods by which organisational factors can be systematically assessed and improved. The majority of research efforts applied so far have tended to be modest and scattered. The ORFA project was created as a remedy to these problems. The objective of the project is to create a better understanding of how organisation and management factors influence nuclear safety. A key scientific objective of the project is to identify components of a theoretical framework, which would help in understanding the relationships between organisational factors and nuclear safety. Three work packages were planned. First, a review of literature listed out the identified factors and methods for assessing them. Then, a draft version of the present report was prepared to clarify the environment context and the main issues of the topics. This draft was discussed at the ORFA seminar in Madrid 21-22 October 1999. During the seminar views and comments were collected on preliminary results of the project. Finally, this information has been integrated in the present and other reports and will be used to give further guidance to the European Commission in the development of forthcoming research programmes in the field. The project has addressed nuclear safety taking a broad perspective, which reflected and took into account the views of senior NPP management and regulators. The questions discussed during the project have been: how can organisational factors be included in safety assessments, how can good and bad operational practices be identified, which methods can be used for detecting weak signals of deteriorating performance, how should incidents be analysed with respect to organisational factors to give the largest learning benefit, how can data on organisational

  7. Organizational factors influencing improvements in safety

    International Nuclear Information System (INIS)

    Marcus, A.; Nichols, M.L.; Olson, J.; Osborn, R.; Thurber, J.

    1991-01-01

    Results of conceptual and empirical research conducted by this research team, and published in NUREG-CR 5437, suggested that processes of organizational problem solving and learning provide a promising area for understanding improvement in safety-related performance in nuclear power plants. In this paper the authors describe the way in which they have built upon that work and gone much further in empirically examining a range of potentially important organizational factors related to safety. The paper describes (1) overall trends in plant performance over time on the Nuclear Regulatory Commission performance indicators, (2) the major elements in the conceptual framework guiding the current work, which seeks among other things to explain those trends, (3) the specific variables used as measures of the central concepts, (4) the results to date of the quantitative empirical work and qualitative work in progress, and (5) conclusions from the research

  8. Assessment of health-related quality of life in spine treatment: conversion from SF-36 to VR-12.

    Science.gov (United States)

    Gornet, Matthew F; Copay, Anne G; Sorensen, Katrine M; Schranck, Francine W

    2018-02-28

    Health-related quality-of-life outcomes have been collected with the Medical Outcomes Study (MOS) Short Form 36 (SF-36) survey. Boston University School of Public Health has developed algorithms for the conversion of SF-36 to Veterans RAND 12-Item Health Survey (VR-12) Physical Component Summary (PCS) and Mental Component Summary (MCS) scores. The purpose of the present study is to investigate the conversion of the SF-36 to VR-12 PCS and MCS scores. Preoperative and postoperative SF-36 were collected from patients who underwent lumbar or cervical surgery from a single surgeon between August 1998 and January 2013. Short Form 36 PCS and MCS scores were calculated following their original instructions. The SF-36 answers were then converted to VR-12 PCS and MCS scores following the algorithm provided by the Boston University School of Public Health. The mean score, preoperative to postoperative change, and proportions of patients who reach the minimum detectable change were compared between SF-36 and VR-12. A total of 1,968 patients (1,559 lumbar and 409 cervical) had completed preoperative and postoperative SF-36. The values of the SF-36 and VR-12 mean scores were extremely similar, with score differences ranging from 0.77 to 1.82. The preoperative to postoperative improvement was highly significant (p36 and VR-12 scores. The mean change scores were similar, with a difference of up to 0.93 for PCS and up to 0.37 for MCS. Minimum detectable change (MDC) values were almost identical for SF-36 and VR-12, with a difference of 0.12 for PCS and up to 0.41 for MCS. The proportions of patients whose change in score reached MDC were also nearly identical for SF-36 and VR-12. About 90% of the patients above SF-36 MDC were also above VR-12 MDC. The converted VR-12 scores, similar to the SF-36 scores, detect a significant postoperative improvement in PCS and MCS scores. The calculated MDC values and the proportions of patients whose score improvement reach MDC are similar for

  9. Discussion on the Safety Factors of Slopes Recommended for Small Dams

    Directory of Open Access Journals (Sweden)

    Jan Vrubel

    2017-01-01

    Full Text Available The design and assessment of the slope stability of small embankment dams is usually not carried out using slope stability calculations but rather by the comparison of proposed or existing dam slopes with those recommended by technical standards or guidelines. Practical experience shows that in many cases the slopes of small dams are steeper than those recommended. However, most of such steeper slopes at existing dams do not exhibit any visible signs of instability, defects or sliding. For the dam owner and also for dam stability engineers, the safety of the slope, expressed e.g. via a factor of safety, is crucial. The aim of this study is to evaluate the safety margin provided by recommended slopes. The factor of safety was evaluated for several dam shape and layout variants via the shear strength reduction method using PLAXIS software. The study covers various dam geometries, dam core and shoulder positions and parameter values of utilised soils. Three load cases were considered: one with a steady state seepage condition and two with different reservoir water level drawdown velocities – standard and critical. As numerous older small dams lack a drainage system, variants with and without a toe drain were assessed. Calculated factors of safety were compared with required values specified by national standards and guidelines.

  10. Negative corona current pulses in argon and in mixture argon with SF6

    International Nuclear Information System (INIS)

    Zahoranova, A.; Zahoran, M.; Bucek, A.; Cernak, M.; Bosko, J.

    2004-01-01

    Waveforms of the first negative current pulses in a short negative point-to plane gap in pure argon and argon with SF 6 admixture have been investigated with a nanosecond time resolution at a gas pressure 50 kPa as a function of applied gap voltage and content of SF 6 in the mixture. We have made an attempt to explain the differences in the discharge development in pure argon and in argon with admixture of SF 6 based on the observed changes of the pulse shape. The experimental results obtained will be discussed in context with existing computer simulation models (Authors)

  11. A study of the valence shell photoelectron and photoabsorption spectra of CF3SF5

    International Nuclear Information System (INIS)

    Holland, D M P; Shaw, D A; Walker, I C; McEwen, I J; Apra, E; Guest, M F

    2005-01-01

    The outer valence shell photoelectron spectrum of CF 3 SF 5 has been studied experimentally and theoretically. Synchrotron radiation has been used to record angle-resolved outer valence shell photoelectron spectra of CF 3 SF 5 in the photon energy range 18-60 eV. These spectra have allowed photoelectron asymmetry parameters and branching ratios to be derived. The Outer Valence Green's Function approach has been employed to calculate the molecular orbital configuration and associated binding energies. A charge distribution analysis has also been obtained. Assignments have been proposed for the peaks observed in the photoelectron spectrum. The absolute photoabsorption cross section of CF 3 SF 5 has been measured from threshold to 40 eV, and strongly resembles that of SF 6 . Assignments, involving intravalence transitions, have been proposed for some of the principal features appearing in the photoabsorption spectrum of CF 3 SF 5

  12. Identifying the Critical Factors Affecting Safety Program Performance for Construction Projects within Pakistan Construction Industry

    Directory of Open Access Journals (Sweden)

    Zubair Ahmed Memon

    2013-04-01

    Full Text Available Many studies have shown that the construction industry one of the most hazardous industries with its high rates of fatalities and injuries and high financial losses incurred through work related accident. To reduce or overcome the safety issues on construction sites, different safety programs are introduced by construction firms. A questionnaire survey study was conducted to highlight the influence of the Construction Safety Factors on safety program implementation. The input from the questionnaire survey was analyzed by using AIM (Average Index Method and rank correlation test was conducted between different groups of respondents to measure the association between different groups of respondent. The finding of this study highlighted that management support is the critical factor for implementing the safety program on projects. From statistical test, it is concluded that all respondent groups were strongly in the favor of management support factor as CSF (Critical Success Factor. The findings of this study were validated on selected case studies. Results of the case studies will help to know the effect of the factors on implementing safety programs during the execution stage.

  13. A quantitative assessment of organizational factors affecting safety using system dynamics model

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Jae Kook; Ahn, Nam Sung [Korea Electric Power Research Institute, Taejon (Korea, Republic of); Jae, Moo Sung [Hanyang Univ., Seoul (Korea, Republic of)

    2004-02-01

    The purpose of this study is to develop a system dynamics model for the assessment of the organizational and human factors in a nuclear power plant which contribute to nuclear safety. Previous studies can be classified into two major approaches. One is the engineering approach using tools such as ergonomics and Probability Safety Assessment (PSA). The other is the socio-psychology approach. Both have contributed to find organizational and human factors and to present guidelines to lessen human error in plants. However, since these approaches assume that the relationship among factors is independent they do not explain the interactions among the factors or variables in nuclear power plants. To overcome these restrictions, a system dynamics model, which can show cause and effect relationships among factors and quantify the organizational and human factors, has been developed. Handling variables such as the degree of leadership, the number of employees, and workload in each department, users can simulate various situations in nuclear power plant organization. Through simulation, users can get insights to improve safety in plants and to find managerial tools in both organizational and human factors.

  14. A quantitative assessment of organizational factors affecting safety using system dynamics model

    International Nuclear Information System (INIS)

    Yu, Jae Kook; Ahn, Nam Sung; Jae, Moo Sung

    2004-01-01

    The purpose of this study is to develop a system dynamics model for the assessment of the organizational and human factors in a nuclear power plant which contribute to nuclear safety. Previous studies can be classified into two major approaches. One is the engineering approach using tools such as ergonomics and Probability Safety Assessment (PSA). The other is the socio-psychology approach. Both have contributed to find organizational and human factors and to present guidelines to lessen human error in plants. However, since these approaches assume that the relationship among factors is independent they do not explain the interactions among the factors or variables in nuclear power plants. To overcome these restrictions, a system dynamics model, which can show cause and effect relationships among factors and quantify the organizational and human factors, has been developed. Handling variables such as the degree of leadership, the number of employees, and workload in each department, users can simulate various situations in nuclear power plant organization. Through simulation, users can get insights to improve safety in plants and to find managerial tools in both organizational and human factors

  15. A COMPREHENSIVE STUDY ON APOPTOSIS INDUCTION BY AZADIRACHTIN IN Spodoptera frugiperda CULTURED CELL LINE Sf9.

    Science.gov (United States)

    Shu, Benshui; Wang, Wenxiang; Hu, Qingbo; Huang, Jingfei; Hu, Meiying; Zhong, Guohua

    2015-07-01

    The induction of apoptosis by azadirachtin, a well-known botanical tetranortriterpenoid isolated from the neem tree (Azadirachta indica A. Juss) and other members of the Meliaceae, was investigated in Spodoptera frugiperda cultured cell line (Sf9). Morphological changes in Sf9 cells treated by various concentrations of azadirachtin were observed at different times under light microscopy. Morphological and biochemical analysis indicated that Sf9 cells treated by 1.5 μg/mL azadirachtin showed typical morphological changes, which were indicative of apoptosis and a clear DNA ladder. The flow cytometry analysis showed the apoptosis rate reached a maximum value of 32.66% at 24 h with 1.5 μg/mL azadirachtin in Sf9 cells. The inhibition of Sf9 cell proliferation suggested that the effect of azadirachtin was dose dependent and the EC50 at 48 and 72 h was 2.727 × 10(-6) and 6.348 × 10(-9) μg/mL, respectively. The treatment of azadirachtin in Sf9 cells could significantly increase the activity of Sf caspase-1, but showed no effect on the activity of Topo I, suggesting that the apoptosis induced by azadirachtinin Sf9 cells is through caspase-dependent pathway. These results provided not only a series of morphological, biochemical, and toxicological comprehensive evidences for induction of apoptosis by azadirachtin, but also a reference model for screening insect cell apoptosis inducers from natural compounds. © 2015 Wiley Periodicals, Inc.

  16. RRM domain of Arabidopsis splicing factor SF1 is important for pre-mRNA splicing of a specific set of genes

    KAUST Repository

    Lee, Keh Chien; Jang, Yun Hee; Kim, SoonKap; Park, Hyo-Young; Thu, May Phyo; Lee, Jeong Hwan; Kim, Jeong-Kook

    2017-01-01

    , but not the abscisic acid sensitivity response during seed germination. The alternative splicing of FLOWERING LOCUS M (FLM) pre-mRNA is involved in flowering time control. We found that the RRM domain of AtSF1 protein alters the production of alternatively spliced FLM

  17. Mechanism for negative corona current pulse in CO sub 2 -SF sub 6 mixtures

    CERN Document Server

    Zahoranova, A; Simor, M; Cernak, M

    2003-01-01

    Current waveforms of first negative corona pulses have been measured in CO sub 2 -SF sub 6 mixtures over a pressure range extending from 6.65 to 50 kPa and various overvoltages. Effects of changing cathode secondary electron emission were studied using a copper cathode coated by CuI and graphite. For a given set of experimental conditions it is concluded that in the mixtures containing up to 30% of SF sub 6 the negative corona pulse is associated with the formation of a cathode-directed streamer-like ionizing wave in the immediate vicinity of the cathode. This is in contrast to the discharge behaviour in air-SF sub 6 and N sub 2 -SF sub 6 mixtures, where in similar conditions the discharge develops according to a multi-avalanche Townsend mechanism. (rapid communication)

  18. Key Factors Affecting Construction Safety Performance in Developing Countries: Evidence from Cambodia

    Directory of Open Access Journals (Sweden)

    Serdar Durdyev

    2017-12-01

    Full Text Available Although proper safety management in construction is of utmost importance; anecdotal evidence suggests that safety is not adequately considered in many developing countries. This paper considers the key variables affecting construction safety performance in Cambodia. Using an empirical questionnaire survey targeting local construction professionals, respondents were invited to rate the level of importance of 30 variables identified from the seminal literature. The data set was subjected to factor analysis. Correlations between the variables show that five key factors underlie the challenges facing the local industry; management and organisation, resources, site management, cosmetic and workforce. It is found that the forefront construction professionals (top management and government authorities should take more responsibilities for further improvements in safety performance on project sites. Findings and recommendations of this study may be useful to construction professional who are seeking ways to improve safety records in developing countries.

  19. Psychometric properties of the Bulgarian translation of noise sensitivity scale short form (NSS-SF): implementation in the field of noise control.

    Science.gov (United States)

    Dzhambov, Angel M; Dimitrova, Donka D

    2014-01-01

    The Noise Sensitivity Scale Short Form (NSS-SF), developed in English as a more practical form of the classical Weinstein NSS, has not to date been validated in other cultures, and its validity and reliability have not yet been confirmed. This study aimed to validate NSS-SF in Bulgarian and to demonstrate its applicability. The study comprised test-retest (n = 115) and a field-testing (n = 71) of the newly validated scale. Its construct validity was examined with confirmatory factor analysis, and very good model-fit was observed. Temporal stability was assessed in a test-retest (r = 0.990), convergent validity was examined with single-item susceptibility to the noise scale (r = 0.906) and discriminant validity was confirmed with single-item noise annoyance scale (r = 0.718). The lowest observed McDonald's omega across the studies was 0.923. The cross-cultural validation of NSS-SF was successful but it proved to be somewhat problematic with respect to its annoyance-based items.

  20. Dynamics of infrared multiphonon dissociation of SF6 by molecular beam method

    International Nuclear Information System (INIS)

    Grant, E.R.; Coggiola, M.J.; Lee, Y.T.; Schulz, P.A.; Shen, Y.R.

    1977-01-01

    A crossed molecular beam apparatus has been adapted to study the dynamics of excitation and dissociation of polyatomic molecules in intense IR laser fields. Initial experiments have involved the study of the dissociation of SF 6 by CO 2 laser radiation at 10.6 μm. A molecular beam of SF 6 was formed by supersonic expansion using three stages of differential pumping. A grating tuned pulsed CO 2 TEA laser was used as the excitation source. The laser beam was focused by a 25 cm focal length ZnSe lens, and crossed the molecular beam near its focal point. The fragments produced by multiphonon dissociation of SF 6 within the small interaction region were detected as a function of recoil angle and velocity. (Auth.)

  1. Nuclear safety and human factors: the French factory of expertise

    International Nuclear Information System (INIS)

    Rolina, G.

    2009-01-01

    The French regulation of the nuclear safety is based on the maintaining of a deep technical dialogue between the nuclear safety authority, the I.R.S.N. (Institute of radiation protection and nuclear safety) and the nuclear operators. This type of risk management is called 'french coking' by the Anglo-Saxons, followers of stricter regulatory approach, more readable by the civil society. This technical dialogue is not without quality, especially in the field of human and organizational factors where it allows to improve the know how situation that stays incomplete. (N.C.)

  2. Safer electronic health records safety assurance factors for EHR resilience

    CERN Document Server

    Sittig, Dean F

    2015-01-01

    This important volume provide a one-stop resource on the SAFER Guides along with the guides themselves and information on their use, development, and evaluation. The Safety Assurance Factors for EHR Resilience (SAFER) guides, developed by the editors of this book, identify recommended practices to optimize the safety and safe use of electronic health records (EHRs). These guides are designed to help organizations self-assess the safety and effectiveness of their EHR implementations, identify specific areas of vulnerability, and change their cultures and practices to mitigate risks.This book pr

  3. Workers’ Age and the Impact of Psychological Factors on the Perception of Safety at Construction Sites

    Directory of Open Access Journals (Sweden)

    Muhammad Dawood Idrees

    2017-05-01

    Full Text Available The safety of construction workers is always a major concern at construction sites as the construction industry is inherently dangerous with many factors influencing worker safety. Several studies concluded that psychological factors such as workload, organizational relationships, mental stress, job security, and job satisfaction have significant effects on workers’ safety. However, research on psychological factors that are characteristic of different age groups have been limited. The aim of this study was to examine the impact of psychological factors on the perception of worker safety for two different age groups. After an extensive literature review, different psychological factors were identified, and a hypothetical research model was developed based on psychological factors that could affect workers’ perception of safety. A survey instrument was developed, and data were collected from seven different construction sites in Pakistan. Structural equation modeling (SEM was employed to test the hypothetical model for both age groups. The results revealed that workload and job satisfaction are significantly dominant factors on workers’ perception of safety in older workers, whereas organizational relationships, mental stress, and job security are dominant factors for younger workers at construction sites.

  4. Breakdown characteristics of SF6/N2 in severely non-uniform electric fields at low temperatures

    Science.gov (United States)

    Wang, Y.; Gao, Z. W.; Li, G. X.; Zhu, X. C.; Yu, C. L.; Liang, J. Q.; Li, L.

    2018-01-01

    SF6 has good electrical insulating properties, which is widely used as an insulating medium of GIS, GIL and other electrical equipment. However, the reliability of electrical equipments´ insulated gas is greatly challenged in cold areas, since SF6 more readily liquefies. To solve the problem, SF6 can be mixed with N2 to maintain the insulating properties, and reduce its liquefaction temperature. Such practice has certain application prospect. In this paper, a breakdown experimental platform was built to study the insulating property of SF6/N2 at low temperature, wherein the temperature of the platform can be adjusted. A severely non-uniform electric field was generated by a rod-plate electrode. The breakdown characteristics of SF6/N2 with different mixing proportions at low pressures and low temperatures were measured. The result showed that the mixed gas was not liquefied within the temperature range. Temperature had insignificant influence on the insulating property thereof. The result in the paper has certain guiding significance for applying SF6/N2 mixed gas in high latitude areas.

  5. Psychometric validation of the SF-36® Health Survey in ulcerative colitis: results from a systematic literature review.

    Science.gov (United States)

    Yarlas, Aaron; Bayliss, Martha; Cappelleri, Joseph C; Maher, Stephen; Bushmakin, Andrew G; Chen, Lea Ann; Manuchehri, Alireza; Healey, Paul

    2018-02-01

    To conduct a systematic literature review of the reliability, construct validity, and responsiveness of the SF-36 ® Health Survey (SF-36) in patients with ulcerative colitis (UC). We performed a systematic search of electronic medical databases to identify published peer-reviewed studies which reported scores from the eight scales and/or two summary measures of the SF-36 collected from adult patients with UC. Study findings relevant to reliability, construct validity, and responsiveness were reviewed. Data were extracted and summarized from 43 articles meeting inclusion criteria. Convergent validity was supported by findings that 83% (197/236) of correlations between SF-36 scales and measures of disease symptoms, disease activity, and functioning exceeded the prespecified threshold (r ≥ |0.40|). Known-groups validity was supported by findings of clinically meaningful differences in SF-36 scores between subgroups of patients when classified by disease activity (i.e., active versus inactive), symptom status, and comorbidity status. Responsiveness was supported by findings of clinically meaningful changes in SF-36 scores following treatment in non-comparative trials, and by meaningfully larger improvements in SF-36 scores in treatment arms relative to controls in randomized controlled trials. The sole study of SF-36 reliability found evidence supporting internal consistency (Cronbach's α ≥ 0.70) for all SF-36 scales and test-retest reliability (intraclass correlation coefficient ≥0.70) for six of eight scales. Evidence from this systematic literature review indicates that the SF-36 is reliable, valid, and responsive when used with UC patients, supporting the inclusion of the SF-36 as an endpoint in clinical trials for this patient population.

  6. Prediction on dielectric strength and boiling point of gaseous molecules for replacement of SF6.

    Science.gov (United States)

    Yu, Xiaojuan; Hou, Hua; Wang, Baoshan

    2017-04-15

    Developing the environment-friendly insulation gases to replace sulfur hexafluoride (SF 6 ) has attracted considerable experimental and theoretical attentions but without success. A computational methodology was presented herein for prediction on dielectric strength and boiling point of arbitrary gaseous molecules in the purpose of molecular design and screening. New structure-activity relationship (SAR) models have been established by combining the density-dependent properties of the electrostatic potential surface, including surface area and the statistical variance of the surface potentials, with the molecular properties including polarizability, electronegativity, and hardness. All the descriptors in the SAR models were calculated using density functional theory. The substitution effect of SF 6 by various functional groups was studied systematically. It was found that CF 3 is the most effective functional group to improve the dielectric strength due to the large surface area and polarizability. However, all the substitutes exhibit higher boiling points than SF 6 because the molecular hardness decreases. The balance between E r and T b could be achieved by minimizing the local polarity of the molecules. SF 5 CN and SF 5 CFO were found to be the potent candidates to replace SF 6 in view of their large dielectric strengths and low boiling points. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

  7. Impact of Geotechnical Factors on the Safety of Low Embankment Dams From the Perspective of Technical and Safety Supervision

    Directory of Open Access Journals (Sweden)

    Kasana Andrej

    2015-03-01

    Full Text Available Our research deals with a broad spectrum of problems concerning the variability of geotechnical factors and their influence on the safety of the biggest group of dam constructions in Slovakia, i.e., low earthfill dams. Its specific aim is the observation of their risk factors by using our experience and knowledge gained while working in the sector of technical and safety supervision. To achieve the aims of a research thesis, we analyzed 39 low earthfill dams. We performed observations and documented their conditions with the aim of clarifying the risk factors. After an analysis of the information materials that characterize dams and after a statistical analysis of the measurement results in situ, including measurements from technical and safety supervision databases, we performed an analysis by using mathematical modeling to evaluate the safety of the dam constructions. Out of the total number of 39 dam constructions, an analysis of the stability of the dam slopes was performed on 37 dams, and deformation problems were analyzed on 28 of the dams. Filtration problems were analyzed at 26 dams, and a complete evaluation of the intensity of filtration movements was performed on 19 of the constructions.

  8. Relationships between road safety, safety measures and external factors : a scan of the literature in view of model development and topics for further research.

    NARCIS (Netherlands)

    Churchill, T. & Norden, Y. van

    2010-01-01

    The purpose of this literature scan is to examine where literature on the effect of external factors and road safety measures on road safety exists and where it is lacking. This scan will help us to decide which factors to include in a comprehensive road safety model as SWOV is working on, and at

  9. Development of a draft of human factors safety review procedures for the Korean Next Generation Reactor

    International Nuclear Information System (INIS)

    Lee, Jung Woon; Moon, B. S.; Park, J. C.; Lee, Y. H.; Oh, I. S.; Lee, H. C.

    2000-02-01

    In this study, a draft of Human Factors Engineering (HFE) Safety Review Procedures (SRP) was developed for the safety review of KNGR based on HFE Safety and Regulatory Requirements and Guidelines (SRRG). This draft includes acceptance criteria, review procedure, and evaluation findings for the areas of review including HFE program management, human factors analyses, human factors design, and HFE verification and validation, based on section 15.1 'human factors engineering design process' and 15.2 'control room human factors engineering' of KNGR specific safety requirements and chapter 15 'human factors engineering' of KNGR safety regulatory guides. For the effective review, human factors concerns or issues related to advanced HSI design that have been reported so far should be extensively examined. In this study, a total of 384 human factors issues related to the advanced HSI design were collected through our review of a total of 145 documents. A summary of each issue was described and the issues were identified by specific features of HSI design. These results were implemented into a database system

  10. The role of engineering judgement, safety culture, and organizational factors in risk assessment

    International Nuclear Information System (INIS)

    Muzumdar, Ajit; Professor, Visiting

    1996-01-01

    This paper reviews the role of engineering judgement, safety culture, and organizational factors in risk assessment by examining the reasons for human-based error. The need for more emphasis on producing engineers with good engineering judgement is described. The progress in quantifying the role of safety culture and organizational factors in risk assessment studies is summarized

  11. IRSN-ANCCLI partnership. Organizational and human factors in nuclear safety - April 2014

    International Nuclear Information System (INIS)

    Jeffroy, Francois; Garron, Joel; Mercel, Philippe; Compagnat, Gilles; Gaucher, Eric; Gaillard, Pierre; Fanchini, Henri; Jacquemont, Vincent

    2013-06-01

    The contributions (Power Point presentations) of this seminar first address the history of the taking into account of organizational and human factors until the Fukushima accident (history of their taking into account in nuclear safety expertise in France, history of the development of policy of organizational and human factors by an operator). The next contributions discuss the main issues regarding these factors after Fukushima: report by a work-group, work performed by the the Comite d'Orientation sur les Facteurs Sociaux, Organisationnels et Humains (Committee of orientation on social, organizational and human factors). The third session addresses the implication of stakeholders in expertise on these factors: analysis of organizational and human factors by a local information commission or by a CHSCT (committee of hygiene, safety and working conditions)

  12. Patient and carer identified factors which contribute to safety incidents in primary care: a qualitative study.

    Science.gov (United States)

    Hernan, Andrea L; Giles, Sally J; Fuller, Jeffrey; Johnson, Julie K; Walker, Christine; Dunbar, James A

    2015-09-01

    Patients can have an important role in reducing harm in primary-care settings. Learning from patient experience and feedback could improve patient safety. Evidence that captures patients' views of the various contributory factors to creating safe primary care is largely absent. The aim of this study was to address this evidence gap. Four focus groups and eight semistructured interviews were conducted with 34 patients and carers from south-east Australia. Participants were asked to describe their experiences of primary care. Audio recordings were transcribed verbatim and specific factors that contribute to safety incidents were identified in the analysis using the Yorkshire Contributory Factors Framework (YCFF). Other factors emerging from the data were also ascertained and added to the analytical framework. Thirteen factors that contribute to safety incidents in primary care were ascertained. Five unique factors for the primary-care setting were discovered in conjunction with eight factors present in the YCFF from hospital settings. The five unique primary care contributing factors to safety incidents represented a range of levels within the primary-care system from local working conditions to the upstream organisational level and the external policy context. The 13 factors included communication, access, patient factors, external policy context, dignity and respect, primary-secondary interface, continuity of care, task performance, task characteristics, time in the consultation, safety culture, team factors and the physical environment. Patient and carer feedback of this type could help primary-care professionals better understand and identify potential safety concerns and make appropriate service improvements. The comprehensive range of factors identified provides the groundwork for developing tools that systematically capture the multiple contributory factors to patient safety. Published by the BMJ Publishing Group Limited. For permission to use (where not

  13. Evaluation of stratospheric age of air from CF4, C2F6, C3F8, CHF3, HFC-125, HFC-227ea and SF6; implications for the calculations of halocarbon lifetimes, fractional release factors and ozone depletion potentials

    Science.gov (United States)

    Leedham Elvidge, Emma; Bönisch, Harald; Brenninkmeijer, Carl A. M.; Engel, Andreas; Fraser, Paul J.; Gallacher, Eileen; Langenfelds, Ray; Mühle, Jens; Oram, David E.; Ray, Eric A.; Ridley, Anna R.; Röckmann, Thomas; Sturges, William T.; Weiss, Ray F.; Laube, Johannes C.

    2018-03-01

    In a changing climate, potential stratospheric circulation changes require long-term monitoring. Stratospheric trace gas measurements are often used as a proxy for stratospheric circulation changes via the mean age of air values derived from them. In this study, we investigated five potential age of air tracers - the perfluorocarbons CF4, C2F6 and C3F8 and the hydrofluorocarbons CHF3 (HFC-23) and HFC-125 - and compare them to the traditional tracer SF6 and a (relatively) shorter-lived species, HFC-227ea. A detailed uncertainty analysis was performed on mean ages derived from these new tracers to allow us to confidently compare their efficacy as age tracers to the existing tracer, SF6. Our results showed that uncertainties associated with the mean age derived from these new age tracers are similar to those derived from SF6, suggesting that these alternative compounds are suitable in this respect for use as age tracers. Independent verification of the suitability of these age tracers is provided by a comparison between samples analysed at the University of East Anglia and the Scripps Institution of Oceanography. All five tracers give younger mean ages than SF6, a discrepancy that increases with increasing mean age. Our findings qualitatively support recent work that suggests that the stratospheric lifetime of SF6 is significantly less than the previous estimate of 3200 years. The impact of these younger mean ages on three policy-relevant parameters - stratospheric lifetimes, fractional release factors (FRFs) and ozone depletion potentials - is investigated in combination with a recently improved methodology to calculate FRFs. Updates to previous estimations for these parameters are provided.

  14. Snit: SF frem, NA og EL under spærregrænsen

    DEFF Research Database (Denmark)

    Thomsen, Søren Risbjerg

    2008-01-01

    NYHED: SF fortsætter fremgangen, mens såvel NA som EL er røget under spærregrænsen i det nye vejede snit af meningsmålinger. Udgivelsesdato: 6. januar......NYHED: SF fortsætter fremgangen, mens såvel NA som EL er røget under spærregrænsen i det nye vejede snit af meningsmålinger. Udgivelsesdato: 6. januar...

  15. Impact of demographic factors on employees perceptions on health and safety management in the Greek Ministries

    Directory of Open Access Journals (Sweden)

    Pavlopoulou Georgia

    2016-10-01

    Full Text Available The purpose of the present study was to investigate the impact of selected demographic factors on perceptions of office workers regarding the management of health and safety in the office work place. For the data collection it was used a scale validated with a sample of 155 office employees. The final sample of the study was 301 subjects from three large Ministries in the Athens region of Greece, selected randomly. Exploratory factor analysis revealed four factors. A further comparison of the health and safety scale factors toward gender, marital status, working hours, monitoring or not seminars related to workplace safety and involvement or not in accidents in the office revealed that: (a The male employees had more positive perceptions than their female counterparts (t = 2.62, p <0.010. (b Positive perceptions showed and those who had attended seminars on safety and those who were not involved in office accidents (t = 2.16, p <0.032 and t = -2.19, p <0.033, respectively. (c It was also founded that men had more positive perceptions than women in the factor workplace environmental conditions (t = 2.40, p <0.018, while employees who had attended seminars on safety had a higher score on the factor health and safety issues in the office in comparison with their colleagues who did not, (t = 2.17, p <0.031. (d Employees who were involved in office accidents rated higher the questions of the factor health and safety issues in the office (t = -2.52, p <0. 015 and lower the factor workplace environmental conditions (t = -2.07, p = .043. It is concluded that despite the differences in the rating health and safety scale, in relation to selected variables, perceptions of employees regarding the management health and safety in the office work are positive.

  16. Statistical Hot Channel Factors and Safety Limit CHFR/OFIR

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Byeonghee; Park, Suki [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    The fuel integrity of research reactors are usually judged by comparing the critical heat flux ratio (CHFR) and the maximum fuel temperature (MFT) with the safety limits. Onset of flow instability ratio (OFIR) can also be used for the examination with CHFR. Hot channel factors (HCFs) are incorporated when calculating the CHFR/OFIR and MFT, to consider the uncertainties of fuel properties and thermo-hydraulic variables affecting them. The HCFs and safety limit CHFR is sometimes estimated to include too much conservatism, deteriorating the design flexibilities and operating margins. In this paper, a statistical estimation of HCFs and the safety limit CHFR/OFIR is presented by a random sampling of uncertainty parameters. A 15MW pool type research reactor is selected as the sample reactor for the estimation. The HCFs and the safety limit CHFR/OFIR of a 15MW pool type research reactor are evaluated statistically. The parameters affecting the HCF and the safety limit CHFR/OFIR are listed and their uncertainties are estimated. The relevant parameter uncertainties are sampled randomly and the HCFs and the safety limits are evaluated from them. The HCFs and the safety limit CHFR/OFIR with 95% probability are smaller than those estimated deterministically because the statistical evaluation convolute the correlation uncertainties and the other uncertainties in probabilistic way, whereas the deterministic evaluation simply multiply them.

  17. Patient Safety Culture Survey in Pediatric Complex Care Settings: A Factor Analysis.

    Science.gov (United States)

    Hessels, Amanda J; Murray, Meghan; Cohen, Bevin; Larson, Elaine L

    2017-04-19

    Children with complex medical needs are increasing in number and demanding the services of pediatric long-term care facilities (pLTC), which require a focus on patient safety culture (PSC). However, no tool to measure PSC has been tested in this unique hybrid acute care-residential setting. The objective of this study was to evaluate the psychometric properties of the Nursing Home Survey on Patient Safety Culture tool slightly modified for use in the pLTC setting. Factor analyses were performed on data collected from 239 staff at 3 pLTC in 2012. Items were screened by principal axis factoring, and the original structure was tested using confirmatory factor analysis. Exploratory factor analysis was conducted to identify the best model fit for the pLTC data, and factor reliability was assessed by Cronbach alpha. The extracted, rotated factor solution suggested items in 4 (staffing, nonpunitive response to mistakes, communication openness, and organizational learning) of the original 12 dimensions may not be a good fit for this population. Nevertheless, in the pLTC setting, both the original and the modified factor solutions demonstrated similar reliabilities to the published consistencies of the survey when tested in adult nursing homes and the items factored nearly identically as theorized. This study demonstrates that the Nursing Home Survey on Patient Safety Culture with minimal modification may be an appropriate instrument to measure PSC in pLTC settings. Additional psychometric testing is recommended to further validate the use of this instrument in this setting, including examining the relationship to safety outcomes. Increased use will yield data for benchmarking purposes across these specialized settings to inform frontline workers and organizational leaders of areas of strength and opportunity for improvement.

  18. Using partial safety factors in wind turbine design and testing

    Energy Technology Data Exchange (ETDEWEB)

    Musial, W.D. [National Renewable Energy Lab., Golden, CO (United States)

    1997-12-31

    This paper describes the relationship between wind turbine design and testing in terms of the certification process. An overview of the current status of international certification is given along with a description of limit-state design basics. Wind turbine rotor blades are used to illustrate the principles discussed. These concepts are related to both International Electrotechnical Commission and Germanischer Lloyd design standards, and are covered using schematic representations of statistical load and material strength distributions. Wherever possible, interpretations of the partial safety factors are given with descriptions of their intended meaning. Under some circumstances, the authors` interpretations may be subjective. Next, the test-load factors are described in concept and then related to the design factors. Using technical arguments, it is shown that some of the design factors for both load and materials must be used in the test loading, but some should not be used. In addition, some test factors not used in the design may be necessary for an accurate test of the design. The results show that if the design assumptions do not clearly state the effects and uncertainties that are covered by the design`s partial safety factors, outside parties such as test labs or certification agencies could impose their own meaning on these factors.

  19. Prescribing safety, negotiating expertise. Building of nuclear safety human factors expertise

    International Nuclear Information System (INIS)

    Rolina, Gregory

    2008-01-01

    This Ph.D thesis is dedicated to a specific type of expertise, the safety of nuclear installations in the field of human and organisational factors. Empirical work is at the foundation of this thesis: the monitoring of experts 'in action', allowed a detailed reconstruction of three cases they were examining. The analysis, at the core of which lies the definition of what an efficient expertise can be, emphasizes the incompleteness of the knowledge that links together the nuclear facilities' organisational characteristics and their safety. This leads us to identify the expert's three ranges of actions (rhetorical, cognitive, operative). Defined from objectives and constraints likely to influence the expert's behaviour, those three ranges each require specific skills. A conception of expertise based on these ranges seems adaptable to other sectors and allows an enrichment of models of expertise cited in literature. Historical elements from French institutions of nuclear safety are also called upon to take into consideration some of the determinants of the expertise; its efficiency relies on the upholding of a continuous dialogue between the regulators (the experts and the control authority) and the regulated (the operators). This type of historically inherited regulation makes up a specificity of the French system of external control of nuclear risks. (author) [fr

  20. Screening test of relays used under pressurized sulfur hexafluoride (SF6)

    International Nuclear Information System (INIS)

    Kutsukake, Kenichi; Matsuda, Makoto; Hanashima, Susumu; Obara, Kenjiro

    2008-01-01

    Many measurement and control devices inside of a high voltage terminal of the JAEA-Tokai tandem accelerator are operated under pressurized sulfur hexafluoride gas (SF 6 ) of 0.5 MPa. This screening test has been carried out to select a relay, which is usable under the pressurized SF 6 for turn on and off a large current of the devices, from commercial relays used in the atmospheric condition. Four kinds of relays were tested: electromechanical relay (EMR), magnet contactor (MAG), solid-state relay (SSR) and hybrid relay (HYB). Temperature and appearance changes of the relay were collected as measurement items. In addition, a reason of contact trouble of the relays was considered from the results of qualitative elementary analysis and observation of the contact surface using the EDS (energy-dispersive X-ray spectroscopy) and the SEM (scanning electron microscope). As a result, the EMR and the MAG showed irregular contact in spite of input voltage and electric current had fed to an operational coil of the relay normally. It is caused by the sulfide or fluoride compounds, which were formed by chemical reaction between metals and sulfur or hydrogen fluoride due to dissociation of SF 6 in electric arcs. On the other hand, the performance of the SSR and the HYB is better than the EMR and the MAG, and it was found that these relays are available in the pressurized SF 6 of 0.5MPa in spite of the standard specification. (author)

  1. PROMIS PF CAT Outperforms the ODI and SF-36 Physical Function Domain in Spine Patients.

    Science.gov (United States)

    Brodke, Darrel S; Goz, Vadim; Voss, Maren W; Lawrence, Brandon D; Spiker, William Ryan; Hung, Man

    2017-06-15

    The Oswestry Disability Index v2.0 (ODI), SF36 Physical Function Domain (SF-36 PFD), and PROMIS Physical Function CAT v1.2 (PF CAT) questionnaires were prospectively collected from 1607 patients complaining of back or leg pain, visiting a university-based spine clinic. All questionnaires were collected electronically, using a tablet computer. The aim of this study was to compare the psychometric properties of the PROMIS PF CAT with the ODI and SF36 Physical Function Domain in the same patient population. Evidence-based decision-making is improved by using high-quality patient-reported outcomes measures. Prior studies have revealed the shortcomings of the ODI and SF36, commonly used in spine patients. The PROMIS Network has developed measures with excellent psychometric properties. The Physical Function domain, delivered by Computerized Adaptive Testing (PF CAT), performs well in the spine patient population, though to-date direct comparisons with common measures have not been performed. Standard Rasch analysis was performed to directly compare the psychometrics of the PF CAT, ODI, and SF36 PFD. Spearman correlations were computed to examine the correlations of the three instruments. Time required for administration was also recorded. One thousand six hundred seven patients were administered all assessments. The time required to answer all items in the PF CAT, ODI, and SF-36 PFD was 44, 169, and 99 seconds. The ceiling and floor effects were excellent for the PF CAT (0.81%, 3.86%), while the ceiling effects were marginal and floor effects quite poor for the ODI (6.91% and 44.24%) and SF-36 PFD (5.97% and 23.65%). All instruments significantly correlated with each other. The PROMIS PF CAT outperforms the ODI and SF-36 PFD in the spine patient population and is highly correlated. It has better coverage, while taking less time to administer with fewer questions to answer. 2.

  2. Implication of human factors in terms of safety

    International Nuclear Information System (INIS)

    Furuta, Kazuo

    2001-01-01

    A critical accident of JCO occurred on September 30, 1999 gave a large impact not only to common society but also to nuclear energy field. This accident occurred by direct reason perfectly out of forecasting of the participants of nuclear energy, where a company made up a guideline violating from business allowance and safety rule and workmen also operated under a procedure out of the guideline. After the accident, a number of countermeasures on equipments, rules, and regulations were carried out, but discussion on software such as their operating methods, concrete regulation on business and authority of operators, and training of specialists seems to be much late. Safety is a problem on a complex system, containing not only hardware but also software such as human, organization, society, and so on. Then, here was discussed on a problem directly faced by conventional safety, engineering centering at hardware through thinking of a problem on human factors. (G.K.)

  3. Method of calculating the safety factor profile on the HT-7 tokamak

    International Nuclear Information System (INIS)

    Zhang Xianmei; Lu Yuancheng; Wan Baonian

    2001-01-01

    A method of calculating the safety factor profile on the HT-7 tokamak has been described. It is derived from Maxwell's equations, among which the authors mainly use two of them: one is the magnetic field diffusion equation, and the other is Ampere's Law. This method can be also used to evaluate the safety factor on other devices with a circular cross sections. It is helpful to the study of the plasma MHD behavior on the HT-7 tokamak

  4. Organizational safety factors research lessons learned

    International Nuclear Information System (INIS)

    Ryan, T.G.

    1995-01-01

    This Paper reports lessons learned and state of knowledge gained from an organizational factors research activity involving commercial nuclear power plants in the United States, through the end of 1991, as seen by the scientists immediately involved in the research. Lessons learned information was gathered from the research teams and individuals using a question and answer format. The following five questions were submitted to each team and individual: (1) What organizational factors appear to influence safety performance in some systematic way, (2) Should organizational factors research focus at the plant level, or should it extend beyond the plant level to the parent company, rate setting commissions, regulatory agencies, (3) How important is having direct access to plants for doing organizational factors research, (4) What lessons have been learned to date as the result of doing organizational factors research in a nuclear regulatory setting, and (5) What organizational research topics and issues should be pursued in the future? Conclusions based on the responses provided for this report are that organizational factors research can be conducted in a regulatory setting and produce useful results. Technologies pioneered in other academic, commercial, and military settings can be adopted for use in a nuclear regulatory setting. The future success of such research depends upon the cooperation of regulators, contractors, and the nuclear industry

  5. Development of a draft of human factors safety review procedures for the Korean next generation reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Moon, B. S.; Park, J. C.; Lee, Y. H.; Oh, I. S.; Lee, H. C. [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2000-02-01

    In this study, a draft of human factors engineering (HFE) safety review procedures (SRP) was developed for the safety review of KNGR based on HFE Safety and Regulatory Requirements and Guidelines (SRRG). This draft includes acceptance criteria, review procedure, and evaluation findings for the areas of review including HFE Program Management, Human Factors Analyses, Human Factors Design, and HFE Verification and Validation, based on Section 15.1 'Human Factors Engineering Design Process' and 15.2 'Control Room Human Factors Engineering' of KNGR Specific Safety Requirements and Chapter 15 'Human Factors Engineering' of KNGR Safety Regulatory Guides. For the effective review, human factors concerns or issues related to advanced HSI design that have been reported so far should be extensively examined. In this study, a total of 384 human factors issues related to the advanced HSI design were collected through our review of a total of 145 documents. A summary of each issue was described and the issues were identified by specific features of HSI design. These results were implemented into a database system. 8 refs., 2 figs. (Author)

  6. Safety update on the use of recombinant activated factor VII in approved indications.

    Science.gov (United States)

    Neufeld, Ellis J; Négrier, Claude; Arkhammar, Per; Benchikh el Fegoun, Soraya; Simonsen, Mette Duelund; Rosholm, Anders; Seremetis, Stephanie

    2015-06-01

    This updated safety review summarises the large body of safety data available on the use of recombinant activated factor VII (rFVIIa) in approved indications: haemophilia with inhibitors, congenital factor VII (FVII) deficiency, acquired haemophilia and Glanzmann's thrombasthenia. Accumulated data up to 31 December 2013 from clinical trials as well as post-marketing data (registries, literature reports and spontaneous reports) were included. Overall, rFVIIa has shown a consistently favourable safety profile, with no unexpected safety concerns, in all approved indications. No confirmed cases of neutralising antibodies against rFVIIa have been reported in patients with congenital haemophilia, acquired haemophilia or Glanzmann's thrombasthenia. The favourable safety profile of rFVIIa can be attributed to the recombinant nature of rFVIIa and its localised mechanism of action at the site of vascular injury. Recombinant FVIIa activates factor X directly on the surface of activated platelets, which are present only at the site of injury, meaning that systemic activation of coagulation is avoided and the risk of thrombotic events (TEs) thus reduced. Nonetheless, close monitoring for signs and symptoms of TE is warranted in all patients treated with any pro-haemostatic agent, including rFVIIa, especially the elderly and any other patients with concomitant conditions and/or predisposing risk factors to thrombosis. Copyright © 2015 Elsevier Ltd. All rights reserved.

  7. SF Bay Water Quality Improvement Fund: Projects and Accomplishments

    Science.gov (United States)

    San Francisco Bay Water Quality Improvement Fund (SFBWQIF) projects listed here are part of an EPA competitive grant program to improve SF Bay water quality focused on restoring impaired waters and enhancing aquatic resources.

  8. Avulsion research using flume experiments and highly accurate and temporal-rich SfM datasets

    Science.gov (United States)

    Javernick, L.; Bertoldi, W.; Vitti, A.

    2017-12-01

    SfM's ability to produce high-quality, large-scale digital elevation models (DEMs) of complicated and rapidly evolving systems has made it a valuable technique for low-budget researchers and practitioners. While SfM has provided valuable datasets that capture single-flood event DEMs, there is an increasing scientific need to capture higher temporal resolution datasets that can quantify the evolutionary processes instead of pre- and post-flood snapshots. However, flood events' dangerous field conditions and image matching challenges (e.g. wind, rain) prevent quality SfM-image acquisition. Conversely, flume experiments offer opportunities to document flood events, but achieving consistent and accurate DEMs to detect subtle changes in dry and inundated areas remains a challenge for SfM (e.g. parabolic error signatures).This research aimed at investigating the impact of naturally occurring and manipulated avulsions on braided river morphology and on the encroachment of floodplain vegetation, using laboratory experiments. This required DEMs with millimeter accuracy and precision and at a temporal resolution to capture the processes. SfM was chosen as it offered the most practical method. Through redundant local network design and a meticulous ground control point (GCP) survey with a Leica Total Station in red laser configuration (reported 2 mm accuracy), the SfM residual errors compared to separate ground truthing data produced mean errors of 1.5 mm (accuracy) and standard deviations of 1.4 mm (precision) without parabolic error signatures. Lighting conditions in the flume were limited to uniform, oblique, and filtered LED strips, which removed glint and thus improved bed elevation mean errors to 4 mm, but errors were further reduced by means of an open source software for refraction correction. The obtained datasets have provided the ability to quantify how small flood events with avulsion can have similar morphologic and vegetation impacts as large flood events

  9. Psychometric Evaluation of the Hypogonadism Impact of Symptoms Questionnaire Short Form (HIS-Q-SF).

    Science.gov (United States)

    Gelhorn, Heather L; Roberts, Laurie J; Khandelwal, Nikhil; Revicki, Dennis A; DeRogatis, Leonard R; Dobs, Adrian; Hepp, Zsolt; Miller, Michael G

    2017-08-01

    The Hypogonadism Impact of Symptoms Questionnaire Short Form (HIS-Q-SF) is a patient-reported outcome measurement designed to evaluate the symptoms of hypogonadism. The HIS-Q-SF is an abbreviated version including17 items from the original 28-item HIS-Q. To conduct item analyses and reduction, evaluate the psychometric properties of the HIS-Q-SF, and provide guidance on score interpretation. A 12-week observational longitudinal study of hypogonadal men was conducted as part of the original HIS-Q psychometric evaluation. Participants completed the original HIS-Q every 2 weeks. Blood samples were collected to evaluate testosterone levels. Participants completed the Aging Male's Symptoms Scale, the International Index of Erectile Function, the Short Form-12, and the PROMIS Sexual Activity, Satisfaction with Sex Life, Sleep Disturbance, and Applied Cognition Scales (baseline and weeks 6 and 12). Clinicians completed the Clinical Global Impression of Severity and Change scales and a clinical form. Item performance was evaluated using descriptive statistics and Rasch analyses. Reliability (internal consistency and test-retest), validity (concurrent and know groups), and responsiveness were assessed. One hundred seventy-seven men participated (mean age = 54.1 years, range = 23-83). Similar to the full HIS-Q, the final abbreviated HIS-Q-SF instrument includes five domains (sexual, energy, sleep, cognition, and mood) with two sexual subdomains (libido and sexual function). For key domains, test-retest reliability was very good, and construct validity was good for all domains. Known-groups validity was demonstrated for all domain scores, subdomain scores, and total score based on the Clinical Global Impression-Severity. All domains and subdomains were responsive to change based on patient-rated anchor questions. The HIS-Q-SF could be a useful tool in clinical practice, epidemiologic studies, and other academic research settings. Careful consideration was given to the

  10. The human factors and the safety of experimentation reactors

    International Nuclear Information System (INIS)

    Jeffroy, F.; Delaporte-Normier, M.L.

    2007-01-01

    Inside IRSN (Institute for Radiological protection and Nuclear Safety), the mission of the Human Factors Group is to assess the way operators of nuclear installations take into account the risks related to human activities. In the last few years, IRSN has been involved in the safety analysis of different installations where Cea develops research programs, in particular experimental reactors. The first part of this article presents the methodology used by IRSN to evaluate how operators take into account risks related to human activities. This methodology is made up of 4 steps: 1) the identification of the human activities that convey a risk for the installation nuclear safety (safety-sensitive activities), for instance in the case of the Masurca reactor, it has been shown that errors made during the manufacturing of fuel tubes can lead to a criticality accident; 2) listing all the dispositions or arrangements taken to make human safety-sensitive activities more reliable; 3) checking the efficiency of such dispositions or arrangements; and 4) assessing the ability of the operators to generate the adequate dispositions or arrangements. The second part highlights the necessity to develop inside these research installations an organisation that facilitates cooperation between experimenters and operators

  11. Application of factor analysis in psychological diagnostics (sample: study of students’ social safety

    Directory of Open Access Journals (Sweden)

    Pavel Aleksandrovich Kislyakov

    2015-10-01

    Our recommendations for the use of factor analysis, with necessary restrictions and clear reasons of a possible ambiguity of solutions, will be useful to everyone interested in mastering an adequate mathematical tool for solving problems pertaining to the humanities, in particular, those of practical psychology. As a practical example is presented the research of the psychological factors which provide students’ social safety. With the help of the factor analysis relevant personal and professional qualities of a teacher were revealed which are the subjective factors of students’ social safety, namely: social anticipation, socio-psychological stress resistance, social tolerance, professional orientation, responsibility, communication skills.

  12. Verification of Overall Safety Factors In Deterministic Design Of Model Tested Breakwaters

    DEFF Research Database (Denmark)

    Burcharth, H. F.

    2001-01-01

    The paper deals with concepts of safety implementation in design. An overall safety factor concept is evaluated on the basis of a reliability analysis of a model tested rubble mound breakwater with monolithic super structure. Also discussed are design load identification and failure mode limit...

  13. Evaluación del estado de salud con la Encuesta SF-36: resultados preliminares en México Health status evaluation with the SF-36 Survey: preliminary results in Mexico

    Directory of Open Access Journals (Sweden)

    Miguel A. Zúniga

    1999-03-01

    Full Text Available Objetivo. Establecer, con la Encuesta SF-36, un perfil multidimensional del estado de salud de una población del sureste de México y analizar las propiedades psicométricas de una traducción de la Encuesta SF-36 autorizada por el Proyecto Internacional de Evaluación de la Calidad de Vida. Material y métodos. La SF-36 se aplicó a 257 participantes voluntarios de una clínica médica y a un grupo control de una institución pública gubernamental. Se utilizó, sin modificar, la metodología de construcción de las escalas de salud propuestas por los autores de la encuesta. Se analizó psicométricamente la validez y la confiabilidad de la adaptación de la SF-36 para su uso en México. Resultados. Se construyeron ocho escalas o conceptos de salud relacionados con función física, rol físico, dolor corporal, salud general, vitalidad, función social, rol emocional y salud mental. En los participantes de los servicios médicos la escala con más bajo promedio fue la de salud general (63, y la más alta, la de rol físico (89. En la población control la escala con promedio más alto fue función física (94.6, y la más baja, salud general (73. La comparación de promedios de escalas en ambos grupos de participantes mostró diferencias estadísticamente significativas en función física, rol físico, dolor corporal, salud general y vitalidad. Conclusiones. Con base en los resultados de la evaluación psicométrica, la SF-36 muestra que es consistente con todos los supuestos de validez y confiabilidad en forma satisfactoria, aunque la traducción de ciertas preguntas se examinará en profundidad para determinar modificaciones subsecuentes.Objective. To establish a multidimensional profile of the health status in a population of southeastern Mexico and analyze the psychometric properties of a translation of the SF-36 survey authorized by the International Quality of Life Assessment Project. Material and methods. The SF-36 was administered to

  14. The balance between safety and productivity and its relationship with human factors and safety awareness and communication in aircraft manufacturing

    NARCIS (Netherlands)

    Karanikas, N.; Melis, Damien Jose; Kourousis, Kyriakos

    2017-01-01

    Background: This paper presents the findings of a pilot research survey which assessed the degree of balance between safety and productivity, and its relationship with awareness and communication of human factors and safety rules in the aircraft manufacturing environment. Methods: The study was

  15. Identification of road user related risk factors, Deliverable 5.1 of the H2020 project SafetyCube (Safety CaUsation, Benefits and Efficiency).

    NARCIS (Netherlands)

    Filtness, A. & Papadimitriou, E. (Eds.) Leskovšek, B. Focant, N. Martensen, H. Sgarra, V. Usami, D.S. Soteropoulos, A. Stadlbauer, S. Theofilatos, A. Yannis, G. Ziakopoulos, A. Diamandouros, K. Durso, C. Goldenbeld, C. Loenis, B. Schermers, G. Petegem, J.-H. van Elvik, R. Hesjevoll, I.S. Quigley, C. & Papazikou, E.

    2017-01-01

    The present Deliverable (D5.1) describes the identification and evaluation of infrastructure related risk factors. It outlines the results of Task 5.1 of WP5 of SafetyCube, which aimed to identify and evaluate infrastructure related risk factors and related road safety problems by (i) presenting a

  16. Ion and electron swarm studies of relevance to plasma processing: positive ion-molecule and electron-molecule studies of SF6 and derivatives

    International Nuclear Information System (INIS)

    Atterbury, C.; Kennedy, R.A.; Critchley, A.D.J.; Mayhew, C.A.

    2002-01-01

    Many sequential and parallel chemical reactions involving charged species occur in a plasma. Data needed to model plasma's chemical and physical environment includes cross-section, rate coefficients, and product ion distribution of electron-molecule and ion-molecule processes. Such reactions are studied by our group away from the complexity of the plasma environment, with experimental techniques that allow us to concentrate on a single process, where usually only one or two species are involved. A molecule commonly used in plasma etching applications is SF 6 1,2 . We have performed a series of positive ion-molecule and electron attachment studies on SF 6 and related molecules, including SeF 6 , TeF 6 (i.e. XF 6 molecules), SF 5 CF 3 and SF 5 Cl (i.e. SF 5 X molecules) 3- (. The studies of ion reactions with and electron attachment to SF 6 and physically similar molecules are of value when seeking to understand the ion and electron chemistry occurring in SF 6 containing plasma. The result of these studies are presented in this poster. Ion-molecule reactions. Rate coefficients and ion product branching ratios have been determined with the Selected Ion Flow Tube (SIFT) at room temperature (300 K) for reactions of SF 5 X with the following twenty-two cations; Ne + , F + , Ar + , N 2 + , N + , CO + , CO 2 + , O + , N 2 O + , O 2 + , SF 4 + , CF 2 + , SF + , SF 2 + , NO 2 + , SF 5 + , NO + , CF + , CF 3 + , SF 3 + , and H 3 O + (listed in order of decreasing recombination energy). SF 2 + , NO 2 + , NO + , SF 3 + , and H 3 O + are found to be unreacted with both SF 5 CF 3 and SF 5 Cl. The majority of the other reactions proceed with rate coefficients that are close to the capture value. Those found to occur at rates significantly less than the capture mechanism value re the reactions of O 2 + , SF + , SF 5 + , and CF 3 + with SF 5 CF 3 , and SF 4 + and SF 5 + with SF 5 Cl. Several distinction processes are observed among the large number of reactions studied, including

  17. Partial safety factors for berthing velocity and loads on marine structures

    NARCIS (Netherlands)

    Roubos, A.A.; Peters, D.J.; Groenewegen, Leon; Steenbergen, R.

    2018-01-01

    Design methods for marine structures have evolved into load and resistance factor design, however existing partial safety factors related to berthing velocity and loads have not been verified and validated by measurement campaigns. In this study, field observations of modern seagoing vessels

  18. Attentional selection of relative SF mediates global versus local processing: evidence from EEG.

    Science.gov (United States)

    Flevaris, Anastasia V; Bentin, Shlomo; Robertson, Lynn C

    2011-06-13

    Previous research on functional hemispheric differences in visual processing has associated global perception with low spatial frequency (LSF) processing biases of the right hemisphere (RH) and local perception with high spatial frequency (HSF) processing biases of the left hemisphere (LH). The Double Filtering by Frequency (DFF) theory expanded this hypothesis by proposing that visual attention selects and is directed to relatively LSFs by the RH and relatively HSFs by the LH, suggesting a direct causal relationship between SF selection and global versus local perception. We tested this idea in the current experiment by comparing activity in the EEG recorded at posterior right and posterior left hemisphere sites while participants' attention was directed to global or local levels of processing after selection of relatively LSFs versus HSFs in a previous stimulus. Hemispheric asymmetry in the alpha band (8-12 Hz) during preparation for global versus local processing was modulated by the selected SF. In contrast, preparatory activity associated with selection of SF was not modulated by the previously attended level (global/local). These results support the DFF theory that top-down attentional selection of SF mediates global and local processing.

  19. M4SF-17LL010302072: The Roles of Diffusion and Corrosion in Radionuclide Retardation

    Energy Technology Data Exchange (ETDEWEB)

    Zavarin, Mavrik [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Balboni, E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Atkins-Duffin, Cindy [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-09-21

    This progress report (Level 4 Milestone Number M4SF-17LL010302072) summarizes research conducted at Lawrence Livermore National Laboratory (LLNL) within the Crystalline Disposal R&D Activity Number M4SF-17LL01030207 and Crystalline International Collaborations Activity Number M4SF-17LL01030208. The focus of this research is the interaction of radionuclides with Engineered Barrier System (EBS) and host rock materials at various physicochemical conditions relevant to subsurface repository environments. They include both chemical and physical processes such as solubility, sorption, and diffusion.

  20. Validation and comparison of EuroQoL-5 dimension (EQ-5D) and Short Form-6 dimension (SF-6D) among stable angina patients.

    Science.gov (United States)

    Wu, Jing; Han, Yuerong; Zhao, Fei-Li; Zhou, Jin; Chen, Zhijun; Sun, He

    2014-10-25

    Several preference-based health-related quality of life (HRQoL) instruments have been published and widely used in different populations. However no consensus has emerged regarding the most appropriate instrument in therapeutic area of stable angina. This study compared and validated the psychometric properties of two generic preference-based instruments, the EQ-5D and SF-6D, among Chinese stable angina patients. Convergent validity of the EQ-5D and SF-6D was examined with eight a priori hypotheses from stable angina patients in conjunction with Seattle Angina Questionnaire (SAQ). Responsiveness was compared using the effect size (ES), relative efficiency (RE) and receiver operating characteristic (ROC) curves. Agreement between the EQ-5D and SF-6D was tested using intra-class correlation coefficient (ICC) and Bland-Altman plot. Factors affecting utility difference were explored with multiple linear regression analysis. In 411 patients (mean age 68.08 ± 11.35), mean utility scores (SD) were 0.78 (0.15) for the EQ-5D and 0.68 (0.12) for the SF-6D. Validity was demonstrated by the moderate to strong correlation coefficients (Range: 0.368-0.594, Pstable-angina-specific health status than the EQ-5D (ES: 0.426 to 1.126). RE suggested that the SF-6D (RE: 44.8 to 177.8%) was more efficient than the EQ-5D except for physical function. Poor agreement between them was observed with ICC (0.448, Pstable angina patients. The SF-6D may be a more effective tool with lower ceiling effect and greater sensitivity. Further study is needed to compare other properties, such as reliability and longitudinal response.

  1. Construct Validity of the SF-12v2 for the Homeless Population with Mental Illness: An Instrument to Measure Self-Reported Mental and Physical Health.

    Science.gov (United States)

    Chum, Antony; Skosireva, Anna; Tobon, Juliana; Hwang, Stephen

    2016-01-01

    Self-reported health measures are important indicators used by clinicians and researchers for the evaluation of health interventions, outcome assessment of clinical studies, and identification of health needs to improve resource allocation. However, the application of self-reported health measures relies on developing reliable and valid instruments that are suitable across diverse populations. The main objective of this study is to evaluate the construct validity of the SF-12v.2, an instrument for measuring self-rated physical and mental health, for homeless adults with mental illness. Various interventions have been aimed at improving the health of homeless people with mental illness, and the development of valid instruments to evaluate these interventions is imperative. We measured self-rated mental and physical health from a quota sample of 575 homeless people with mental illness using the SF-12v2, EQ-5D, Colorado Symptoms Index, and physical/mental health visual analogue scales. We examined the construct validity of the SF-12v2 through confirmatory factor analyses (CFA), and using ANOVA/correlation analyses to compare the SF-12v2 to the other instruments to ascertain discriminant/convergent validity. Our CFA showed that the measurement properties of the original SF-12v2 model had a mediocre fit with our empirical data (χ2 = 193.6, df = 43, p physical and mental health status for a homeless population with mental illness.

  2. Effectively Coping With Task Stress: A Study of the Validity of the Trait Emotional Intelligence Questionnaire-Short Form (TEIQue-SF).

    Science.gov (United States)

    O'Connor, Peter; Nguyen, Jessica; Anglim, Jeromy

    2017-01-01

    In this study, we investigated the validity of the Trait Emotional Intelligence Questionnaire-Short Form (TEIQue-SF; Petrides, 2009) in the context of task-induced stress. We used a total sample of 225 volunteers to investigate (a) the incremental validity of the TEIQue-SF over other predictors of coping with task-induced stress, and (b) the construct validity of the TEIQue-SF by examining the mechanisms via which scores from the TEIQue-SF predict coping outcomes. Results demonstrated that the TEIQue-SF possessed incremental validity over the Big Five personality traits in the prediction of emotion-focused coping. Results also provided support for the construct validity of the TEIQue-SF by demonstrating that this measure predicted adaptive coping via emotion-focused channels. Specifically, results showed that, following a task stressor, the TEIQue-SF predicted low negative affect and high task performance via high levels of emotion-focused coping. Consistent with the purported theoretical nature of the trait emotional intelligence (EI) construct, trait EI as assessed by the TEIQue-SF primarily enhances affect and performance in stressful situations by regulating negative emotions.

  3. Factors impacting perceived safety among staff working on mental health wards.

    Science.gov (United States)

    Haines, Alina; Brown, Andrew; McCabe, Rhiannah; Rogerson, Michelle; Whittington, Richard

    2017-09-01

    Safety at work is a core issue for mental health staff working on in-patient units. At present, there is a limited theoretical base regarding which factors may affect staff perceptions of safety. This study attempted to identify which factors affect perceived staff safety working on in-patient mental health wards. A cross-sectional design was employed across 101 forensic and non-forensic mental health wards, over seven National Health Service trusts nationally. Measures included an online staff survey, Ward Features Checklist and recorded incident data. Data were analysed using categorical principal components analysis and ordinal regression. Perceptions of staff safety were increased by ward brightness, higher number of patient beds, lower staff to patient ratios, less dayroom space and more urban views. The findings from this study do not represent common-sense assumptions. Results are discussed in the context of the literature and may have implications for current initiatives aimed at managing in-patient violence and aggression. None. © The Royal College of Psychiatrists 2017. This is an open access article distributed under the terms of the Creative Commons Attribution (CC BY) license.

  4. Magnitude and meaningfulness of change in SF-36 scores in four types of orthopedic surgery

    Directory of Open Access Journals (Sweden)

    Buchbinder Rachelle

    2008-07-01

    Full Text Available Abstract Background The Medical Outcomes General Health Survey (SF-36 is a widely used health status measure; however, limited evidence is available for its performance in orthopedic settings. The aim of this study was to examine the magnitude and meaningfulness of change and sensitivity of SF-36 subscales following orthopedic surgery. Methods Longitudinal data on outcomes of total hip replacement (THR, n = 255, total knee replacement (TKR, n = 103, arthroscopic partial meniscectomy (APM, n = 74 and anterior cruciate ligament reconstruction (ACL, n = 62 were used to estimate the effect sizes (ES, magnitude of change and minimal detectable change (sensitivity at the group and individual level. To provide context for interpreting the magnitude of changes in SF-36 scores, we also compared patients' scores with age and sex-matched population norms. The studies were conducted in Sweden. Follow-up was five years in THR and TKR studies, two years in ACL, and three months in APM. Results On average, large effect sizes (ES≥0.80 were found after orthopedic surgery in SF-36 subscales measuring physical aspects (physical functioning, role physical, and bodily pain. Small (0.20–0.49 to moderate (0.50–0.79 effect sizes were found in subscales measuring mental and social aspects (role emotional, vitality, social functioning, and mental health. General health scores remained relatively unchanged during the follow-up. Despite improvements, post-surgery mean scores of patients were still below the age and sex matched population norms on physical subscales. Patients' scores on mental and social subscales approached population norms following the surgery. At the individual level, scores of a large proportion of patients were affected by floor or ceiling effects on several subscales and the sensitivity to individual change was very low. Conclusion Large to moderate meaningful changes in group scores were observed in all SF-36 subscales except General Health

  5. M4SF-17LL010301071: Thermodynamic Database Development

    Energy Technology Data Exchange (ETDEWEB)

    Zavarin, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). Glenn T. Seaborg Institute, Physical & Life Sciences; Wolery, T. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). Akima Infrastructure Services, LLC

    2017-09-05

    This progress report (Level 4 Milestone Number M4SF-17LL010301071) summarizes research conducted at Lawrence Livermore National Laboratory (LLNL) within the Argillite Disposal R&D Work Package Number M4SF-17LL01030107. The DR Argillite Disposal R&D control account is focused on the evaluation of important processes in the analysis of disposal design concepts and related materials for nuclear fuel disposal in clay-bearing repository media. The objectives of this work package are to develop model tools for evaluating impacts of THMC process on long-term disposal of spent fuel in argillite rocks, and to establish the scientific basis for high thermal limits. This work is contributing to the GDSA model activities to identify gaps, develop process models, provide parameter feeds and support requirements providing the capability for a robust repository performance assessment model by 2020.

  6. Human Factors in Fire Safety Management and Prevention

    Directory of Open Access Journals (Sweden)

    M.A. Othuman Mydin

    2014-07-01

    Full Text Available Fire protection is the study and practice of mitigating the unwanted effects of potentially destructive fires. It involves the study of the behavior, compartmentalization, and investigation of fire and its related emergencies, as well as the research and development, production, testing and application of mitigating systems. Problems still occurred despite of the adequate fire safety systems installed. For most people in high-risk buildings, not all accidents were caused by them. They were more likely to be the victims of a fire that occurred. Besides damaging their properties and belongings, some people were burned to death for not knowing what to do if fire happens in their place. This paper will present the human factors in fire safety management and prevention system.

  7. 75 FR 76481 - Notice of Intent To Prepare Environmental Impact Statement for the HOPE SF Development at Alice...

    Science.gov (United States)

    2010-12-08

    ... Environmental Impact Statement for the HOPE SF Development at Alice Griffith Public Housing Development, San... Housing as part of its HOPE SF development program. Funding for the project may include HUD funds from... revitalization program under HOPE SF (Cal 118). The proposed development would be located on approximately 20 net...

  8. Catquest-9SF questionnaire: validation of Malay and Chinese-language versions using Rasch analysis.

    Science.gov (United States)

    Adnan, Tassha Hilda; Mohamed Apandi, Mokhlisoh; Kamaruddin, Haireen; Salowi, Mohamad Aziz; Law, Kian Boon; Haniff, Jamaiyah; Goh, Pik Pin

    2018-01-05

    Catquest questionnaire was originally developed in Swedish to measure patients' self-assessed visual function to evaluate the benefit of cataract surgery. The result of the Rasch analysis leading to the creation of the nine-item short form of Catquest, (Catquest-9SF), and it had been translated and validated in English. The aim is therefore to evaluate the translated Catquest-9SF questionnaire in Malay and Chinese (Mandarin) language version for measuring patient-reported visual function among cataract population in Malaysia. The English version of Catquest-9SF questionnaire was translated and back translated into Malay and Chinese languages. The Malay and Chinese translated versions were self-administered by 236 and 202 pre-operative patients drawn from a cataract surgery waiting list, respectively. The translated Catquest-9SF data and its four response options were assessed for fit to the Rasch model. The Catquest-9SF performed well in the Malay and Chinese translated versions fulfilling all criteria for valid measurement, as demonstrated by Rasch analysis. Both versions of questionnaire had ordered response thresholds, with a good person separation (Malay 2.84; and Chinese 2.59) and patient separation reliability (Malay 0.89; Chinese 0.87). Targeting was 0.30 and -0.11 logits in Malay and Chinese versions respectively, indicating that the item difficulty was well suited to the visual abilities of the patients. All items fit a single overall construct (Malay infit range 0.85-1.26, outfit range 0.73-1.13; Chinese infit range 0.80-1.51, outfit range 0.71-1.36), unidimensional by principal components analysis, and was free of Differential Item Functioning (DIF). These results support the good overall functioning of the Catquest-9SF in patients with cataract. The translated questionnaire to Malay and Chinese-language versions are reliable and valid in measuring visual disability outcomes in the Malaysian cataract population.

  9. Vip3Aa induces apoptosis in cultured Spodoptera frugiperda (Sf9) cells.

    Science.gov (United States)

    Jiang, Kun; Mei, Si-Qi; Wang, Ting-Ting; Pan, Jin-Hua; Chen, Yue-Hua; Cai, Jun

    2016-09-15

    The vegetative insecticidal proteins (Vip) secreted by many Bacillus thuringiensis strains during their vegetative growth stage are regarded as second generation insecticidal proteins, as they share no sequence or structural homology with known crystal insecticidal proteins (Cry) and have a broad insecticidal spectrum. Compared with insecticidal crystal proteins (ICPs), the insecticidal mechanisms of Vips have been little studied. Here we investigated the mechanism responsible for Vip3Aa toxicity in cultured insect cells. Using, flow cytometry analyzes, TUNEL staining and DNA fragmentation assays, we show that Vip3Aa can induce apoptosis in Spodoptera frugiperda (Sf9) cells and cause cells to arrest at the G2/M phase. We also show that Vip3Aa can disrupt mitochondrial membrane potential (ΔΨm), leading to the activation of Sf-caspase-1, suggesting that a mitochondrial mediated and caspase dependent pathway may be involved in Vip3Aa-induced apoptosis in Sf9 cells. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. National report of the Slovak Republic. Compiled in terms of the joint convention on the safety of spent fuel management and on the safety of radioactive waste management. 2005

    International Nuclear Information System (INIS)

    Hekel, P.; Ivan, J.; Lukacovic, K.; Parimucha, F.; Suss, J; Tomek, J.; Jurina, V.; Kobzova, D.; Konecny, L.; Homola, J.; Zavazanova, A.; Metke, E.; Turner, M.; Vaclav, J.; Ziakova, M.; Pospisil, M.; Petrik, T.

    2005-09-01

    The National Report (Compiled in terms of the Joint Convention - September 2005) contains information how each of the obligations of the Joint Convention have been implemented. A account of activities carried out by the Nuclear Regulatory Authority of the Slovak Republic (UJD) and other Slovak organisations are presented. These activities are reported under the headings: (A) Introduction; (B) Spent fuel and radioactive waste management; C) Scope of application; (D) Inventories and lists; (E) Legislation and regulation; (F) Other general safety provisions; (G) Safety of spent fuel management; (H) Safety of RAW management; (I) Transboundary movement of SF and RAW; (J) Disused sealed sources; (K) planned activiries to improve safety; (L) Annexes

  11. Partial Safety Factors for Fatigue Design of Wind Turbine Blades

    DEFF Research Database (Denmark)

    Toft, Henrik Stensgaard; Sørensen, John Dalsgaard

    2010-01-01

    In the present paper calibration of partial safety factors for fatigue design of wind turbine blades is considered. The stochastic models for the physical uncertainties on the material properties are based on constant amplitude fatigue tests and the uncertainty on Miners rule for linear damage...... accumulation is determined from variable amplitude fatigue tests with the Wisper and Wisperx spectra. The statistical uncertainty for the assessment of the fatigue loads is also investigated. The partial safety factors are calibrated for design load case 1.2 in IEC 61400-1. The fatigue loads are determined...... from rainflow-counting of simulated time series for a 5MW reference wind turbine [1]. A possible influence of a complex stress state in the blade is not taken into account and only longitudinal stresses are considered....

  12. Study on safety educations against individual causal factors of unsafe acts and specification of target trainees

    International Nuclear Information System (INIS)

    Hirose, Ayako; Takeda, Daisuke

    2016-01-01

    Many accidents and incidents are caused by unsafe acts. It is important to reduce these unsafe acts for preventing the accidents. The countermeasures for each causal factor behind unsafe acts are needed, however, comparing with improvement of facilities, workers-oriented measures such as safety educations are not sufficient. Then the purposes of this study are as follows: 1) to investigate the individual factors which have great impact of unsafe acts and the existing safety educations which aim to mitigate the impact of these factors, 2) to specify the target trainees to perform these safety educations. To identify common factors that affect unsafe act significantly, a web survey was conducted to 500 workers who have regularly carried out accident prediction training (i.e. Kiken-Yochi training). They were asked the situation which they were apt to act unsafely by free description. As the result, the following three main factors were extracted: impatience, overconfidence, and bothersome. Also, it was found that there were few existing safety educations which aim to mitigate the impact of these factors except for overconfidence. To specify the target trainees to perform safety educations which aim to mitigate the impact of these three factors, another web survey was conducted to 200 personnel in charge of safety at the workplace. They were asked the features of workers who tended to act unsafely by age group. The relationship between the factor that need to mitigate and the trainee who need to receive the education were clarified from the survey. (author)

  13. A dispersion safety factor for LNG vapor clouds

    Energy Technology Data Exchange (ETDEWEB)

    Vílchez, Juan A. [TIPs – Trámites, Informes y Proyectos, SL, Llenguadoc 10, 08030 Barcelona (Spain); Villafañe, Diana [Centre d’Estudis del Risc Tecnològic (CERTEC), Universitat Politècnica de Catalunya, Diagonal 647, 08028 Barcelona, Catalonia (Spain); Casal, Joaquim, E-mail: joaquim.casal@upc.edu [Centre d’Estudis del Risc Tecnològic (CERTEC), Universitat Politècnica de Catalunya, Diagonal 647, 08028 Barcelona, Catalonia (Spain)

    2013-02-15

    Highlights: ► We proposed a new parameter: the dispersion safety factor (DSF). ► DSF is the ratio between the distance reached by the LFL and that reached by the visible cloud. ► The results for the DSF agree well with the evidence from large scale experiments. ► Two expressions have been proposed to calculate DSF as a function of H{sub R}. ► The DSF may help in indicating the danger of ignition of a LNG vapor cloud. -- Abstract: The growing importance of liquefied natural gas (LNG) to global energy demand has increased interest in the possible hazards associated with its storage and transportation. Concerning the event of an LNG spill, a study was performed on the relationship between the distance at which the lower flammability limit (LFL) concentration occurs and that corresponding to the visible contour of LNG vapor clouds. A parameter called the dispersion safety factor (DSF) has been defined as the ratio between these two lengths, and two expressions are proposed to estimate it. During an emergency, the DSF can be a helpful parameter to indicate the danger of cloud ignition and flash fire.

  14. A dispersion safety factor for LNG vapor clouds

    International Nuclear Information System (INIS)

    Vílchez, Juan A.; Villafañe, Diana; Casal, Joaquim

    2013-01-01

    Highlights: ► We proposed a new parameter: the dispersion safety factor (DSF). ► DSF is the ratio between the distance reached by the LFL and that reached by the visible cloud. ► The results for the DSF agree well with the evidence from large scale experiments. ► Two expressions have been proposed to calculate DSF as a function of H R . ► The DSF may help in indicating the danger of ignition of a LNG vapor cloud. -- Abstract: The growing importance of liquefied natural gas (LNG) to global energy demand has increased interest in the possible hazards associated with its storage and transportation. Concerning the event of an LNG spill, a study was performed on the relationship between the distance at which the lower flammability limit (LFL) concentration occurs and that corresponding to the visible contour of LNG vapor clouds. A parameter called the dispersion safety factor (DSF) has been defined as the ratio between these two lengths, and two expressions are proposed to estimate it. During an emergency, the DSF can be a helpful parameter to indicate the danger of cloud ignition and flash fire

  15. Factors affecting the utilization of safety devices by commercial ...

    African Journals Online (AJOL)

    Background: Motorcycle crashes are common causes of morbidity and mortality for both riders and passengers. To prevent and reduce the severity of injuries sustained through road traffic accidents (RTA) many countries enforce the use of safety devices while riding. Certain factors including non-enforcement of the existing ...

  16. Magnitude and meaningfulness of change in SF-36 scores in four types of orthopedic surgery

    DEFF Research Database (Denmark)

    Busija, Lucy; Osborne, Richard H; Nilsdotter, Anna

    2008-01-01

    BACKGROUND: The Medical Outcomes General Health Survey (SF-36) is a widely used health status measure; however, limited evidence is available for its performance in orthopedic settings. The aim of this study was to examine the magnitude and meaningfulness of change and sensitivity of SF-36...

  17. Analysis of Traffic Safety Factors at Level Rail-Road Crossings

    Directory of Open Access Journals (Sweden)

    Tomislav Mlinarić

    2012-10-01

    Full Text Available The paper analyses the main factors of traffic safety andreliabilityat level crossings. The number and causes of accidentsare stated, that result from ignorance, insufficient training ofthe traffic participants, their ilnsponsibility and insufficient orincomplete legislation, as well as from insufficiently professionaland scientifically not serious enough approach to solvingthis cardinal problem in road and railway traffic. Based on theanalysis the causes are determined and solutions proposed, aswell as more efficient methods to improve safety and reduce thenumber of traffic accidents at level crossings.

  18. Scattering factor evaluation for internal dose assessment due to 60Co

    International Nuclear Information System (INIS)

    Gautam, Y.P.; Kumar, A.; Sharma, S.; Sharma, A.K.; Dube, B.; Hegde, A.G.

    2008-01-01

    Guidelines for the assessment of internal doses from monitoring suggest default measurement of uncertainties (i.e. lognormal scattering factor, SF) to be used for different types of monitoring data. In this paper, SF values have been evaluated for internal contamination due to 60 Co in two cases using whole body counting data. SF values of 1.04 and 1.03 were obtained for case I and II respectively while SF value of 1.03 was obtained using bioassay data for case I. SF evaluated is in good agreement with the default values given by IDEAS guidelines. (author)

  19. Measurement of Safety Factor Using Hall Probes on CASTOR Tokamak

    Czech Academy of Sciences Publication Activity Database

    Kovařík, Karel; Ďuran, Ivan; Bolshakova, I.; Holyaka, R.; Erashok, V.

    2006-01-01

    Roč. 56, suppl.B (2006), s. 104-110 ISSN 0011-4626. [Symposium on Plasma Physics and Technology/22nd./. Praha, 26.6.2006-29.6.2006] R&D Projects: GA AV ČR(CZ) KJB100430504 Institutional research plan: CEZ:AV0Z20430508 Keywords : Plasma * tokamak * safety factor * hall probe Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 0.568, year: 2006

  20. Stability of regularly prescribed oral liquids formulated with SyrSpend® SF.

    Science.gov (United States)

    Uriel, M; Gómez-Rincón, C; Marro, D

    2018-04-02

    The purpose of this research was to evaluate the stability of 12 oral liquid formulations frequently compounded in hospital and community settings formulated in a specific vehicle: SyrSpend® SF. The stability of melatonin, glycopyrrolate, ciclosporin, chloral hydrate, flecainide acetate, tiagabine HCl, labetalol HCl, ciprofloxacin HCl, spironolactone/hydrochlorothiazide, hydrocortisone, itraconazole and celecoxib in SyrSpend SF PH4 (liquid) was investigated at 0, 30, 60 and 90 days and stored at both controlled room temperature and refrigerated. Itraconazole samples were also investigated at 15 and 45 days. No change in odor, color or appearance was observed in the formulations during the test period. Based on the results, a beyond-use date of 30 days can be assigned to tiagabine HCl 1.0 mg/ml in SyrSpend SF when stored at controlled room temperature, and 90 days under refrigeration, improving stability data previously published using other vehicles. A beyond-use date of 60 days can be assigned to chloral hydrate 100.0 mg/ml. In this case, stability is not enhanced by refrigeration. With the rest of the formulations, less than 10% API loss occurred over 90 days at either controlled room temperature or under refrigeration. Including for example itraconazole 20.0 mg/ml, thus providing extended stability compared to simple syrup and other oral liquid vehicles. The findings of this study show that SyrSpend SF is an appropriate suspending vehicle to be used for personalized formulations of the APIs studied here.

  1. Overview of the fundamental safety principles

    International Nuclear Information System (INIS)

    Chishinga, Milton Mulenga

    2015-02-01

    The primary objective of this work was to provide an overview of the International Atomic Energy (IAEA) document; 'Fundamental Safety principles, SF.1'. The document outlines ten (10) fundamental principles which provide the basis for an effective the radiation protection framework. The document is the topmost in the hierarchy of the IAEA Safety Standards Series. These principles are the foundation of the nuclear safety put stringent obligations on Parties under the Convention on Nuclear Safety. The fundamental safety objective is to protect people and the environment from harmful effects of ionizing radiation. The fundamental Safety objective of protecting people individually and collectively and the environment has to be achieved without unduly limiting the operation of facilities or the conduct of activities that give rise to risks. The thematic areas covered are; responsibility for safety, role of government, leadership and management for safety, justification of facilities and activities, optimization of protection, limitation of risks to individuals, protection of present and future generations, prevention of accidents, emergency preparedness and response and protective actions to reduce existing or unregulated radiation risks. Appropriate recommendations have been provided for effective application of the principles by Governments, Regulatory Bodies and Operating Organizations of facilities and Nuclear Installations the give rise to radiation risks. (au)

  2. On applying safety archetypes to the Fukushima accident to identify nonlinear influencing factors

    Energy Technology Data Exchange (ETDEWEB)

    Sousa, A.L., E-mail: alsousa@cnen.gov.br [Comissao Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil); Ribeiro, A.C.O., E-mail: antonio.ribeiro@bayer.com [Bayer Crop Science Brasil S.A., Belford Roxo, RJ (Brazil); Duarte, J.P., E-mail: julianapduarte@poli.ufrj.br [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola Politecnica. Departamento de Engenharia Nuclear; Frutuoso e Melo, P.F., E-mail: frutuoso@nuclear.ufrj.br [Coordenacao dos Programas de Pos-Graduacao em Engenharia (COOPE/UFRJ), RJ (Brazil). Programa de Engenharia Nuclear

    2013-07-01

    Nuclear power plants are typically characterized as high reliable organizations. In other words, they are organizations defined as relatively error free over a long period of time. Another relevant characteristic of the nuclear industry is that safety efforts are credited to design. However, major accidents, like the Fukushima accident, have shown that new tools are needed to identify latent deficiencies and help improve their safety level. Safety archetypes proposed elsewhere (e. g., safety issues stalled in the face of technological advances and eroding safety) consonant with International Atomic Energy Agency (IAEA) efforts are used to examine different aspects of accidents in a systemic perspective of the interaction between individuals, technology and organizational factors. Safety archetypes can help consider nonlinear interactions. Effects are rarely proportional to causes and what happens locally in a system (near the current operating point) often does not apply to distant regions (other system states), so that one has to consider the so-called nonlinear interactions. This is the case, for instance, with human probability failure estimates and safety level identification. In this paper, we discuss the Fukushima accident in order to show how archetypes can highlight nonlinear interactions of factors that influenced it and how to maintain safety levels in order to prevent other accidents. The initial evaluation of the set of archetypes suggested in the literature showed that at least four of them are applicable to the Fukushima accident, as is inferred from official reports on the accident. These are: complacency (that is, the effects of complacency on safety), decreased safety awareness, fixing on symptoms and not the real causes and eroding safety. (author)

  3. On applying safety archetypes to the Fukushima accident to identify nonlinear influencing factors

    International Nuclear Information System (INIS)

    Sousa, A.L.; Ribeiro, A.C.O.; Duarte, J.P.; Frutuoso e Melo, P.F.

    2013-01-01

    Nuclear power plants are typically characterized as high reliable organizations. In other words, they are organizations defined as relatively error free over a long period of time. Another relevant characteristic of the nuclear industry is that safety efforts are credited to design. However, major accidents, like the Fukushima accident, have shown that new tools are needed to identify latent deficiencies and help improve their safety level. Safety archetypes proposed elsewhere (e. g., safety issues stalled in the face of technological advances and eroding safety) consonant with International Atomic Energy Agency (IAEA) efforts are used to examine different aspects of accidents in a systemic perspective of the interaction between individuals, technology and organizational factors. Safety archetypes can help consider nonlinear interactions. Effects are rarely proportional to causes and what happens locally in a system (near the current operating point) often does not apply to distant regions (other system states), so that one has to consider the so-called nonlinear interactions. This is the case, for instance, with human probability failure estimates and safety level identification. In this paper, we discuss the Fukushima accident in order to show how archetypes can highlight nonlinear interactions of factors that influenced it and how to maintain safety levels in order to prevent other accidents. The initial evaluation of the set of archetypes suggested in the literature showed that at least four of them are applicable to the Fukushima accident, as is inferred from official reports on the accident. These are: complacency (that is, the effects of complacency on safety), decreased safety awareness, fixing on symptoms and not the real causes and eroding safety. (author)

  4. Northeast Cooperative Research Study Fleet (SF) Program Biological Sampling Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Northeast Cooperative Research Study Fleet (SF) Program partners with a subset of commercial fishermen to collect high quality, high resolution, haul by haul...

  5. Factors Affecting the Behavior of Engineering Students toward Safety Practices in the Machine Shop

    Directory of Open Access Journals (Sweden)

    Jessie Kristian M. Neria

    2015-08-01

    Full Text Available This study aimed to determine the factors that affect the behavior of engineering student toward safety practices in the machine shop. Descriptive type of research was utilized in the study. Results showed that most of the engineering students clearly understand the signage shown in the machine shop. Students are aware that they should not leave the machines unattended. Most of the engineering students handle and use the machine properly. The respondents have an average extent of safety practices in the machine shop which means that they are applying safety practices in their every activity in machine shop. There is strong relationship between the safety practices and the factors affecting behavior in terms of signage, reminder of teacher and rules and regulation.

  6. Transport mechanisms for synoptic, seasonal and interannual SF6 variations and "age" of air in troposphere

    Directory of Open Access Journals (Sweden)

    K. Miyazaki

    2009-02-01

    Full Text Available We use an atmospheric general circulation model (AGCM driven chemistry-transport model (ACTM to simulate the evolution of sulfur hexafluoride (SF6 in the troposphere. The model results are compared with continuous measurements at 6 sites over 71° N–90° S. These comparisons demonstrate that the ACTM simulations lie within the measurement uncertainty over the analysis period (1999–2006 and capture salient features of synoptic, seasonal and interannual SF6 variability. To understand transport timescales of SF6 within the troposphere, transport times of air parcels from the surface to different regions of the troposphere ("age" are estimated from a simulation of an idealized tracer. The age estimation error and its sensitivity to the selection of reanalysis meteorology for ACTM nudging or the tracer transport by deep cumulus convection as represented in the model are discussed. Monthly-mean, 2-box model exchange times (τex are calculated from both the observed and simulated SF6 time series at the 6 observing sites and show favorable agreement, suggesting that the ACTM adequately represents large-scale interhemispheric transport. The simulated SF6 variability is further investigated through decomposition of the mixing ratio time-tendency into advective, convective, and vertical diffusive components. The transport component analysis illustrates the role of each process in SF6 synoptic variability at the site level and provides insight into the seasonality of τex.

  7. Analysis of the gene coding for steroidogenic factor 1 (SF1, NR5A1) in a cohort of 50 Egyptian patients with 46,XY disorders of sex development.

    Science.gov (United States)

    Tantawy, Sally; Mazen, Inas; Soliman, Hala; Anwar, Ghada; Atef, Abeer; El-Gammal, Mona; El-Kotoury, Ahmed; Mekkawy, Mona; Torky, Ahmad; Rudolf, Agnes; Schrumpf, Pamela; Grüters, Annette; Krude, Heiko; Dumargne, Marie-Charlotte; Astudillo, Rebekka; Bashamboo, Anu; Biebermann, Heike; Köhler, Birgit

    2014-05-01

    Steroidogenic factor 1 (SF1, NR5A1) is a key transcriptional regulator of genes involved in the hypothalamic-pituitary-gonadal axis. Recently, SF1 mutations were found to be a frequent cause of 46,XY disorders of sex development (DSD) in humans. We investigate the frequency of NR5A1 mutations in an Egyptian cohort of XY DSD. Clinical assessment, endocrine evaluation and genetic analysis of 50 Egyptian XY DSD patients (without adrenal insufficiency) with a wide phenotypic spectrum. Molecular analysis of NR5A1 gene by direct sequencing followed by in vitro functional analysis of the two novel missense mutations detected. Three novel heterozygous mutations of the coding region in patients with hypospadias were detected. p.Glu121AlafsX25 results in severely truncated protein, p.Arg62Cys lies in DNA-binding zinc finger, whereas p.Ala154Thr lies in the hinge region of SF1 protein. Transactivation assays using reporter constructs carrying promoters of anti-Müllerian hormone (AMH), CYP11A1 and TESCO core enhancer of Sox9 showed that p.Ala154Thr and p.Arg62Cys mutations result in aberrant biological activity of NR5A1. A total of 17 patients (34%) harboured the p.Gly146Ala polymorphism. We identified two novel NR5A1 mutations showing impaired function in 23 Egyptian XY DSD patients with hypospadias (8.5%). This is the first study searching for NR5A1 mutations in oriental patients from the Middle East and Arab region with XY DSD and no adrenal insufficiency, revealing a frequency similar to that in European patients (6.5-15%). We recommend screening of NR5A1 in patients with hypospadias and gonadal dysgenesis. Yearly follow-ups of gonadal function and early cryoconservation of sperms should be performed in XY DSD patients with NR5A1 mutations given the risk of future fertility problems due to early gonadal failure.

  8. The modelling influence of water content to mechanical parameter of soil in analysis of slope stability

    Science.gov (United States)

    Gusman, M.; Nazki, A.; Putra, R. R.

    2018-04-01

    One of the parameters in slope stability analysis is the shear strength of the soil. Changes in soil shear strength characteristics lead to a decrease in safety factors on the slopes. This study aims to see the effect of increased moisture content on soil mechanical parameters. The case study study was conducted on the slopes of Sitinjau Lauik Kota Padang. The research method was done by laboratory analysis and simple liniear regression analysis and multiple. Based on the test soil results show that the increase in soil water content causes a decrease in cohesion values and internal shear angle. The relationship of moisture content to cohesion is described in equation Y = 55.713-0,6X with R2 = 0.842. While the relationship of water content to shear angle in soil is described in the equation Y = 38.878-0.258X with R2 = 0.915. From several simulations of soil water level improvement, calculation of safety factor (SF) of slope. The calculation results show that the increase of groundwater content is very significant affect the safety factor (SF) slope. SF slope values are in safe condition when moisture content is 50% and when it reaches maximum water content 73.74% slope safety factor value potentially for landslide.

  9. 77 FR 26025 - Notice of Intent To Prepare a Environmental Impact Statement (EIS) for the HOPE SF Development at...

    Science.gov (United States)

    2012-05-02

    ... a Environmental Impact Statement (EIS) for the HOPE SF Development at Potrero Terrace and Potrero... Statement (EIR/EIS) for the HOPE SF Development at the Potrero Terrace and Potrero Annex Public Housing Development (Potrero HOPE SF Master Plan Project). The EIR/EIS will be a joint National Environmental Policy...

  10. Electrospun nanofibrous SF/P(LLA-CL) membrane: a potential substratum for endothelial keratoplasty.

    Science.gov (United States)

    Chen, Junzhao; Yan, Chenxi; Zhu, Mengyu; Yao, Qinke; Shao, Chunyi; Lu, Wenjuan; Wang, Jing; Mo, Xiumei; Gu, Ping; Fu, Yao; Fan, Xianqun

    2015-01-01

    Cornea transplant technology has progressed markedly in recent decades, allowing surgeons to replace diseased corneal endothelium by a thin lamellar structure. A thin, transparent, biocompatible, tissue-engineered substratum with corneal endothelial cells for endothelial keratoplasty is currently of interest. Electrospinning a nanofibrous structure can simulate the extracellular matrix and have beneficial effects for cell culture. Silk fibroin (SF) has good biocompatibility but poor mechanical properties, while poly(L-lactic acid-co-ε-caprolactone) (P(LLA-CL)) has good mechanical properties but poor biocompatibility. Blending SF with P(LLA-CL) can maintain the advantages of both these materials and overcome their disadvantages. Blended electrospun nanofibrous membranes may be suitable for regeneration of the corneal endothelium. The aim of this study was to produce a tissue-engineered construct suitable for endothelial keratoplasty. Five scaffolds containing different SF:P(LLA-CL) blended ratios (100:0, 75:25, 50:50, 25:75, 0:100) were manufactured. A human corneal endothelial (B4G12) cell line was cultured on the membranes. Light transmission, speed of cell adherence, cell viability (live-dead test), cell proliferation (Ki-67, BrdU staining), and cell monolayer formation were detected on membranes with the different blended ratios, and expression of some functional genes was also detected by real-time polymerase chain reaction. Different blended ratios of scaffolds had different light transmittance properties. The 25:75 blended ratio membrane had the best transmittance among these scaffolds. All electrospun nanofibrous membranes showed improved speed of cell adherence when compared with the control group, especially when the P(LLA-CL) ratio increased. The 25:75 blended ratio membranes also had the highest cell proliferation. B4G12 cells could form a monolayer on all scaffolds, and most functional genes were also stably expressed on all scaffolds. Only two genes

  11. Streptococcus iniae SF1: complete genome sequence, proteomic profile, and immunoprotective antigens.

    Directory of Open Access Journals (Sweden)

    Bao-cun Zhang

    Full Text Available Streptococcus iniae is a Gram-positive bacterium that is reckoned one of the most severe aquaculture pathogens. It has a broad host range among farmed marine and freshwater fish and can also cause zoonotic infection in humans. Here we report for the first time the complete genome sequence as well as the host factor-induced proteomic profile of a pathogenic S. iniae strain, SF1, a serotype I isolate from diseased fish. SF1 possesses a single chromosome of 2,149,844 base pairs, which contains 2,125 predicted protein coding sequences (CDS, 12 rRNA genes, and 45 tRNA genes. Among the protein-encoding CDS are genes involved in resource acquisition and utilization, signal sensing and transduction, carbohydrate metabolism, and defense against host immune response. Potential virulence genes include those encoding adhesins, autolysins, toxins, exoenzymes, and proteases. In addition, two putative prophages and a CRISPR-Cas system were found in the genome, the latter containing a CRISPR locus and four cas genes. Proteomic analysis detected 21 secreted proteins whose expressions were induced by host serum. Five of the serum-responsive proteins were subjected to immunoprotective analysis, which revealed that two of the proteins were highly protective against lethal S. iniae challenge when used as purified recombinant subunit vaccines. Taken together, these results provide an important molecular basis for future study of S. iniae in various aspects, in particular those related to pathogenesis and disease control.

  12. Streptococcus iniae SF1: Complete Genome Sequence, Proteomic Profile, and Immunoprotective Antigens

    Science.gov (United States)

    Zhang, Bao-cun; Zhang, Jian; Sun, Li

    2014-01-01

    Streptococcus iniae is a Gram-positive bacterium that is reckoned one of the most severe aquaculture pathogens. It has a broad host range among farmed marine and freshwater fish and can also cause zoonotic infection in humans. Here we report for the first time the complete genome sequence as well as the host factor-induced proteomic profile of a pathogenic S. iniae strain, SF1, a serotype I isolate from diseased fish. SF1 possesses a single chromosome of 2,149,844 base pairs, which contains 2,125 predicted protein coding sequences (CDS), 12 rRNA genes, and 45 tRNA genes. Among the protein-encoding CDS are genes involved in resource acquisition and utilization, signal sensing and transduction, carbohydrate metabolism, and defense against host immune response. Potential virulence genes include those encoding adhesins, autolysins, toxins, exoenzymes, and proteases. In addition, two putative prophages and a CRISPR-Cas system were found in the genome, the latter containing a CRISPR locus and four cas genes. Proteomic analysis detected 21 secreted proteins whose expressions were induced by host serum. Five of the serum-responsive proteins were subjected to immunoprotective analysis, which revealed that two of the proteins were highly protective against lethal S. iniae challenge when used as purified recombinant subunit vaccines. Taken together, these results provide an important molecular basis for future study of S. iniae in various aspects, in particular those related to pathogenesis and disease control. PMID:24621602

  13. [Human factors and crisis resource management: improving patient safety].

    Science.gov (United States)

    Rall, M; Oberfrank, S

    2013-10-01

    A continuing high number of patients suffer harm from medical treatment. In 60-70% of the cases the sources of harm can be attributed to the field of human factors (HFs) and teamwork; nevertheless, those topics are still neither part of medical education nor of basic and advanced training even though it has been known for many years and it has meanwhile also been demonstrated for surgical specialties that training in human factors and teamwork considerably reduces surgical mortality.Besides the medical field, the concept of crisis resource management (CRM) has already proven its worth in many other industries by improving teamwork and reducing errors in the domain of human factors. One of the best ways to learn about CRM and HFs is realistic simulation team training with well-trained instructors in CRM and HF. The educational concept of the HOTT (hand over team training) courses for trauma room training offered by the DGU integrates these elements based on the current state of science. It is time to establish such training for all medical teams in emergency medicine and operative care. Accompanying safety measures, such as the development of a positive culture of safety in every department and the use of effective critical incident reporting systems (CIRs) should be pursued.

  14. Structure from Motion (SfM) photogrammetry applied to historical imagery: plug & play?

    Science.gov (United States)

    Bakker, Maarten; Lane, Stuart N.

    2017-04-01

    The development of Structure from Motion (SfM) photogrammetry has led to a vast increase and expansion of geomorphological applications. Highly detailed Digital Elevation Models (DEMs) can be efficiently generated from a variety of platforms that cover a large range of spatial scales. For the application of DEMs in geomorphic change analysis, precision and spatial resolution are not of sole importance, but also their accuracy, temporal resolution and temporal coverage. The use of archival imagery may substantially lengthen temporal coverage, allowing quantification of annual to decadal scale landform change. Whilst archival photogrammetry is not new, a question arises as to how applicable SfM methods are as a more cost-effective and straightforward alternative to the conventional approach. Here, we studied a relatively extreme case where we applied SfM techniques to archival aerial imagery, to investigate the decadal evolution of a low relief braided river. The Borgne is an Alpine river in south-west Switzerland which is strongly affected by flow abstraction for hydropower, allowing the fairly straightforward application of photogrammetry on the near-dry river bed. For 8 sets of scanned historical aerial images in the period 1959-2005 we performed Ground Control Point (GCP) assisted bundle adjustment using both classical archival digital photogrammetry (used as a reference dataset) and SfM based photogrammetry. For the SfM method, no further data were used to constrain camera or exterior orientation parameters a priori, but instead we used these for a posteriori verification. The resulting densified point clouds were registered onto a reference surface based on stable areas, allowing the correction for any systematic error in DEMs that may arise from (random) error in the bundle adjustment. The obtained results show that the quality of the SfM based bundle adjustment is similar to that of the classical photogrammetric approach. Next to image scale, the quality is

  15. SF6 ventilation study at Agnew Lake Mines, Ontario

    International Nuclear Information System (INIS)

    1979-03-01

    In September 1978, James F. MacLaren Limited was awarded a contract by the Canada Centre for Mineral and Energy Technology (CANMET) to undertake a ventilation study at an underground uranium mine using sulphur hexafluoride (SF 6 ) as a tracer gas. The mine selected for the study was that of Agnew Lake Mines Limited in Northern Ontario. This is a relatively new mine with the combined mine/mill facilities first operational in mid-1977. Uranium is recovered from broken ore by in-situ leaching. The ventilation study was divided into two phases. A laboratory study was undertaken to develop a practical sampling technique, provide an evaluation of the logistics of long range sample transport and develop a laboratory analytical technique. Field programmes demonstrated the SF 6 tracer gas technique for mine ventilation trouble-shooting with the intent of providing information which will lead to more efficient use of existing mine ventilation capacity. This report outlines the findings of the laboratory study and the two field programmes

  16. Predicting SF-6D utility scores from the Oswestry disability index and numeric rating scales for back and leg pain.

    Science.gov (United States)

    Carreon, Leah Y; Glassman, Steven D; McDonough, Christine M; Rampersaud, Raja; Berven, Sigurd; Shainline, Michael

    2009-09-01

    Cross-sectional cohort. The purpose of this study is to provide a model to allow estimation of utility from the Short Form (SF)-6D using data from the Oswestry Disability Index (ODI), Back Pain Numeric Rating Scale (BPNRS), and the Leg Pain Numeric Rating Scale (LPNRS). Cost-utility analysis provides important information about the relative value of interventions and requires a measure of utility not often available from clinical trial data. The ODI and numeric rating scales for back (BPNRS) and leg pain (LPNRS), are widely used disease-specific measures for health-related quality of life in patients with lumbar degenerative disorders. The purpose of this study is to provide a model to allow estimation of utility from the SF-6D using data from the ODI, BPNRS, and the LPNRS. SF-36, ODI, BPNRS, and LPNRS were prospectively collected before surgery, at 12 and 24 months after surgery in 2640 patients undergoing lumbar fusion for degenerative disorders. Spearman correlation coefficients for paired observations from multiple time points between ODI, BPNRS, and LPNRS, and SF-6D utility scores were determined. Regression modeling was done to compute the SF-6D score from the ODI, BPNRS, and LPNRS. Using a separate, independent dataset of 2174 patients in which actual SF-6D and ODI scores were available, the SF-6D was estimated for each subject and compared to their actual SF-6D. In the development sample, the mean age was 52.5 +/- 15 years and 34% were male. In the validation sample, the mean age was 52.9 +/- 14.2 years and 44% were male. Correlations between the SF-6D and the ODI, BPNRS, and LPNRS were statistically significant (P < 0.0001) with correlation coefficients of 0.82, 0.78, and 0.72, respectively. The regression equation using ODI, BPNRS,and LPNRS to predict SF-6D had an R of 0.69 and a root mean square error of 0.076. The model using ODI alone had an R of 0.67 and a root mean square error of 0.078. The correlation coefficient between the observed and estimated

  17. Assessment of NPP safety taking into account seismic and engineering-geological factors

    International Nuclear Information System (INIS)

    Yakovlev, E.A.

    1990-01-01

    Consideration is given to the problem of probabilistic analysis of NPP safety with account of risk of destructive effect of earthquakes and the danger of accidental geological processes (diapirism, karst etc.) under NPP operation. It is shown that account of seismic and engineering-geological (engineering-seismological) risk factors in probabilistic analysis of safety enables to perform anticipatory analysis of behaviour of principle plant objects and to improve safety of their operation by revealing the most unstable elements of geotechnical system forming the main contribution to the total NPP risk

  18. Two-temperature thermodynamic and transport properties of SF6–Cu plasmas

    International Nuclear Information System (INIS)

    Wu, Yi; Chen, Zhexin; Yang, Fei; Rong, Mingzhe; Sun, Hao; Cressault, Yann; Murphy, Anthony B; Guo, Anxiang; Liu, Zirui

    2015-01-01

    SF 6 and Cu are widely adopted in electrical equipment as a dielectric medium and for conductive components, respectively. SF 6 –Cu plasmas are frequently formed, particularly in high-voltage circuit breaker arcs and fault current arcs, due to erosion of the Cu components. In this paper, calculated values of the thermodynamic and transport properties of plasmas in SF 6 –Cu mixtures are presented for both thermal equilibrium and non-equilibrium conditions. The composition is determined by the two-temperature Saha equation and Guldberg–Waage equation in the form derived by van de Sanden. The composition and the thermodynamic properties are evaluated through a classical statistical mechanics approach. For the transport coefficients, the simplified Chapman–Enskog method developed by Devoto, which decouples the electrons and heavy species, has been applied using the most recent collision integrals. The thermodynamic and transport properties are calculated for different electron temperatures (300–40 000 K), ratios of electron to heavy-species temperature (1–10), pressures (0.1–10 atm) and copper molar proportions (0–50%). It is found that deviations from thermal equilibrium strongly affect the thermodynamic and transport properties of the SF 6 –Cu plasmas. Further, the presence of copper has different effects on some of the properties for plasmas in and out of thermal equilibrium. The main reason for these changes is that dissociation reactions are delayed for non-thermal equilibrium plasmas, which in turn influences the ionization reactions that occur. (paper)

  19. Impact of 10% SF6 Gas Compared to 100% Air Tamponade in Descemet's Membrane Endothelial Keratoplasty.

    Science.gov (United States)

    Rickmann, Annekatrin; Szurman, Peter; Jung, Sacha; Boden, Karl Thomas; Wahl, Silke; Haus, Arno; Boden, Katrin; Januschowski, Kai

    2018-04-01

    To compare the clinical outcomes following Descemet's membrane endothelial keratoplasty (DMEK) with 100% air tamponade versus 10% sulfur hexafluoride (SF 6 ) tamponade. Retrospective analysis of 108 consecutive DMEK cases subdivided by anterior chamber tamponade with 54 eyes receiving 10% SF 6 and 54 eyes receiving 100% air injection. A post-hoc matched analysis revealed no statistically significant differences between the groups. The main outcome measurements were the complication rate, including intra- and postoperative complications and graft detachment rate requiring re-bubbling. Clinical outcome included best-corrected visual acuity (BCVA), endothelial cell count (ECC), and central corneal thickness (CCT) measured 1, 3, and 6 months after DMEK surgery. The graft detachment rate with consecutive re-bubbling was 18.5% in the air group and 22.2% in the SF 6 group (p = 0.2). Remaining small peripheral graft detachments with a clear cornea occurred more often in the 100% air group (air: 22.2%; 12/54, 6/12 inferior compared to SF 6 : 7.4%; 4/54, 2/4 inferior; p = 0.06). The primary graft failure rate was comparable between the two groups. No complete graft detachment occurred. Outcome results for BCVA, ECC, and CCT at all follow-up time points were comparable between the two groups. The clinical outcomes (including re-bubbling rate, primary graft failure rate, and endothelial cell loss) were comparable with 100% air versus 10% SF 6 tamponade, whereas other studies suggest that a higher SF 6 concentration (20%) may result in a lower re-bubbling rate.

  20. Passive Q-switching in CW-CO2 laser with SF6 as an intracavity saturable absorber

    International Nuclear Information System (INIS)

    Al-Hawat, Sh.

    2007-10-01

    A passive Q-switching was applied to a tunable CW CO 2 laser with output power about 3.5 W using SF 6 as a saturable absorber inside the cavity. The Q-Switching phenomenon was studied ( pulse shape, pulse duration, repetition rate and conditions of its generation ) at the spectral lines of 10P(10), 10P(26), 10P(28) and 10P(30) from the branch of 10P of CO 2 laser. These lines had a weak absorption in relation to other lines of this branch, under SF 6 pressure till 0.5 mbar. To control the behaviour of such phenomenon, the gases He and Xe were added separately to SF 6 . It was observed that the Q-switching phenomenon was depended on the added gas pressure of Xe and He, through the repetitive rate of pulses , duration and energy of generated laser pulse. A computational program was written to calculate the Q-switching pulses parameters under similar conditions as those applied in the case of SF 6 +He mixture. A comparison was made with the experimental data , not so big discrepancies were observed between them. In addition to that, absorption coefficients of SF 6 were determined in two cases: the first one when the absorption cell was located outside the laser cavity, and the second one when the cell was located inside the cavity. On the basis of obtained coefficients the absorption cross sections of SF 6 were found and compared with NIST database.(author)

  1. Gonadal expression of Sf1 and aromatase during sex determination in the red-eared slider turtle (Trachemys scripta), a reptile with temperature-dependent sex determination.

    Science.gov (United States)

    Ramsey, Mary; Shoemaker, Christina; Crews, David

    2007-12-01

    Many egg-laying reptiles have temperature-dependent sex determination (TSD), where the offspring sex is determined by incubation temperature during a temperature-sensitive period (TSP) in the middle third of development. The underlying mechanism transducing a temperature cue into an ovary or testis is unknown, but it is known that steroid hormones play an important role. During the TSP, exogenous application of estrogen can override a temperature cue and produce females, while blocking the activity of aromatase (Cyp19a1), the enzyme that converts testosterone to estradiol, produces males from a female-biased temperature. The production of estrogen is a key step in ovarian differentiation for many vertebrates, including TSD reptiles, and temperature-based differences in aromatase expression during the TSP may be a critical step in ovarian determination. Steroidogenic factor-1 (Sf1) is a key gene in vertebrate sex determination and regulates many steroidogenic enzymes, including aromatase. We find that Sf1 and aromatase are differentially expressed during sex determination in the red-eared slider turtle, Trachemys scripta elegans. Sf1 is expressed at higher levels during testis development while aromatase expression increases during ovary determination. We also assayed Sf1 and aromatase response to sex-reversing treatments via temperature or the modulation of estrogen availability. Sf1 expression was redirected to low-level female-specific patterns with feminizing temperature shift or exogenous estradiol application and redirected to more intense male-specific patterns with male-producing temperature shift or inhibition of aromatase activity. Conversely, aromatase expression was redirected to more intense female-specific patterns with female-producing treatment and redirected toward diffuse low-level male-specific patterns with masculinizing sex reversal. Our data do not lend support to a role for Sf1 in the regulation of aromatase expression during slider turtle sex

  2. Research on Safety Factor of Dam Slope of High Embankment Dam under Seismic Condition

    Directory of Open Access Journals (Sweden)

    Li Bin

    2015-01-01

    Full Text Available With the constant development of construction technology of embankment dam, the constructed embankment dam becomes higher and higher, and the embankment dam with its height over 200m will always adopt the current design criteria of embankment dam only suitable for the construction of embankment dam lower than 200m in height. So the design criteria of high embankment dam shall be improved. We shall calculate the stability and safety factors of dam slope of high embankment dam under different dam height, slope ratio and different seismic intensity based on ratio of safety margin, and clarify the change rules of stability and safety factors of dam slope of high embankment dam with its height over 200m. We calculate the ratio of safety margin of traditional and reliable method by taking the stable, allowable and reliability index 4.2 of dam slope of high embankment dam with its height over 200m as the standard value, and conduct linear regression for both. As a result, the conditions, where 1.3 is considered as the stability and safety factors of dam slope of high embankment dam with its height over 200m under seismic condition and 4.2 as the allowable and reliability index, are under the same risk control level.

  3. Objective Provision Trees of Reactivity Control Safety Function for Sodium-Cooled Fast Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Bongsuk; Yang, Huichang [TUEV Rheinland Korea Ltd., Seoul (Korea, Republic of); Suh, Namduk [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2014-05-15

    The purpose of this OPT is first to assure the DiD design during the licensing of Sf, but it will also contribute in evaluating the completeness of regulatory requirements under development by Korea Institute of Nuclear Safety (KINS). Based on the definition of Defense-in-Depth (DiD) levels and safety functions for KALIMER Sodium-Cooled Fast Reactor (SFR), suggested in the reference and, Objective Provision Trees (OPTs) of reactivity control function for level 1, 2, 3 and 4 DiD were developed and suggested in this paper. The challenges and mechanisms and provisions were briefly explained in this paper. Comparing the mechanisms and provisions with the requirements will contribute in identifying the missing requirements. Since the design of Prototype Gen-IV Sf (PGSFR) is not mature yet, the OPT is developed for KALIMER design. Developed level 1 to 4 OPTs in this study can be used for the identification of potential design vulnerabilities. When detailed identification of provisions in terms of design features were achieved through the next step of this study, it can contribute to the establishment of defense-in-depth evaluation frame for the regulatory reviews for the licensing process. In the next stage of this study, other safety function will be researched and findings can be suggested as recommendations for the safety improvement.

  4. Objective Provision Trees of Reactivity Control Safety Function for Sodium-Cooled Fast Reactor

    International Nuclear Information System (INIS)

    Kang, Bongsuk; Yang, Huichang; Suh, Namduk

    2014-01-01

    The purpose of this OPT is first to assure the DiD design during the licensing of Sf, but it will also contribute in evaluating the completeness of regulatory requirements under development by Korea Institute of Nuclear Safety (KINS). Based on the definition of Defense-in-Depth (DiD) levels and safety functions for KALIMER Sodium-Cooled Fast Reactor (SFR), suggested in the reference and, Objective Provision Trees (OPTs) of reactivity control function for level 1, 2, 3 and 4 DiD were developed and suggested in this paper. The challenges and mechanisms and provisions were briefly explained in this paper. Comparing the mechanisms and provisions with the requirements will contribute in identifying the missing requirements. Since the design of Prototype Gen-IV Sf (PGSFR) is not mature yet, the OPT is developed for KALIMER design. Developed level 1 to 4 OPTs in this study can be used for the identification of potential design vulnerabilities. When detailed identification of provisions in terms of design features were achieved through the next step of this study, it can contribute to the establishment of defense-in-depth evaluation frame for the regulatory reviews for the licensing process. In the next stage of this study, other safety function will be researched and findings can be suggested as recommendations for the safety improvement

  5. Cloning and Characterization of Sf9 Cell Lamin and the Lamin Conformational Changes during Autographa californica multiple nucleopolyhedrovirus Infection

    Directory of Open Access Journals (Sweden)

    Wenqiang Wei

    2016-05-01

    Full Text Available At present, the details of lamina alterations after baculovirus infection remain elusive. In this study, a lamin gene in the Sf9 cell line of Spodoptera frugiperda was cloned. The open reading frame (orf of the Sf9 lamin was 1860 bp and encoded a protein with a molecular weight of 70 kDa. A transfection assay with a red fluorescence protein (rfp-lamin fusion protein indicated that Sf9 lamin was localized in the nuclear rim. Transmission electron microscopy observations indicated that Autographa californica multiple nucleopolyhedrovirus (AcMNPV nucleocapsids may pass through the nuclear envelope. Immunofluorescence assay indicated that the lamina showed a ruffled staining pattern with the formation of invaginations in the Sf9 cells infected with AcMNPV, while it was evenly distributed at the nuclear periphery of mock-infected cells. Western blotting results indicated that the total amount of lamin in the baculovirus-infected Sf9 cells was significantly decreased compared with the mock-infected cells. These results imply that AcMNPV infection induces structural and biochemical rearrangements of lamina of Sf9 cells.

  6. S-F graphic representation analysis of photoelectric facula focometer poroo-plate glass

    Science.gov (United States)

    Tong, Yilin; Han, Xuecai

    2016-10-01

    Optical system focal length is usually based on the magnification method with focal length measurement poroo-plate glass is used as base element measuring focal length of focometer. On the basis of using analysis of magnification method to measure the accuracy of optical lens focal length, an expression between the ruling span of poroo-plate glass and the focal length of measured optical system was deduced, an efficient method to work out S-F graph with AUTOCAD was developed, the selecting principle of focometer parameter was analyzed, and Applied examples for designing poroo-plate glass in S-F figure was obtained.

  7. Modification in existing SF6 gas handling system at 14UD BARC-TIFR Pelletron Accelerator, Mumbai

    International Nuclear Information System (INIS)

    Ninawe, N.G.; Gupta, S.K.; Ramjilal; Sparrow, Hillary; Sharma, S.C.; Bhagwat, P.V.; Salvi, S.B.

    2003-01-01

    BARC-TIFR 14 UD Pelletron Accelerator facility at TIFR, Mumbai is operational since inception 1989. The accelerator is housed inside a pressure vessel of 6 metre diameter, 25 metre long and 525m 3 volume. The accelerator tank is pressurized with SF 6 at 80 to 100 psig in order to achieve 14MV. The inventory of SF 6 gas is about 18,000 Kg (approximately) at 80 psig. SF 6 gas can be transported from Accelerator tank to storage tank using gas handling system, which consists of oil free compressor, vacuum pump, dust filters, oil filters, dryers etc

  8. Central nervous system-specific knockout of steroidogenic factor 1 results in increased anxiety-like behavior.

    Science.gov (United States)

    Zhao, Liping; Kim, Ki Woo; Ikeda, Yayoi; Anderson, Kimberly K; Beck, Laurel; Chase, Stephanie; Tobet, Stuart A; Parker, Keith L

    2008-06-01

    Steroidogenic factor 1 (SF-1) plays key roles in adrenal and gonadal development, expression of pituitary gonadotropins, and development of the ventromedial hypothalamic nucleus (VMH). If kept alive by adrenal transplants, global knockout (KO) mice lacking SF-1 exhibit delayed-onset obesity and decreased locomotor activity. To define specific roles of SF-1 in the VMH, we used the Cre-loxP system to inactivate SF-1 in a central nervous system (CNS)-specific manner. These mice largely recapitulated the VMH structural defect seen in mice lacking SF-1 in all tissues. In multiple behavioral tests, mice with CNS-specific KO of SF-1 had significantly more anxiety-like behavior than wild-type littermates. The CNS-specific SF-1 KO mice had diminished expression or altered distribution in the mediobasal hypothalamus of several genes whose expression has been linked to stress and anxiety-like behavior, including brain-derived neurotrophic factor, the type 2 receptor for CRH (Crhr2), and Ucn 3. Moreover, transfection and EMSAs support a direct role of SF-1 in Crhr2 regulation. These findings reveal important roles of SF-1 in the hypothalamic expression of key regulators of anxiety-like behavior, providing a plausible molecular basis for the behavioral effect of CNS-specific KO of this nuclear receptor.

  9. The SF-8 Spanish Version for Health-Related Quality of Life Assessment: Psychometric Study with IRT and CFA Models.

    Science.gov (United States)

    Tomás, José M; Galiana, Laura; Fernández, Irene

    2018-03-22

    The aim of current research is to analyze the psychometric properties of the Spanish version of the SF-8, overcoming previous shortcomings. A double line of analyses was used: competitive structural equations models to establish factorial validity, and Item Response theory to analyze item psychometric characteristics and information. 593 people aged 60 years or older, attending long life learning programs at the University were surveyed. Their age ranged from 60 to 92 years old. 67.6% were women. The survey included scales on personality dimensions, attitudes, perceptions, and behaviors related to aging. Competitive confirmatory models pointed out two-factors (physical and mental health) as the best representation of the data: χ2(13) = 72.37 (p < .01); CFI = .99; TLI = .98; RMSEA = .08 (.06, .10). Item 5 was removed because of unreliability and cross-loading. Graded response models showed appropriate fit for two-parameter logistic model both the physical and the mental dimensions. Item Information Curves and Test Information Functions pointed out that the SF-8 was more informative for low levels of health. The Spanish SF-8 has adequate psychometric properties, being better represented by two dimensions, once Item 5 is removed. Gathering evidence on patient-reported outcome measures is of crucial importance, as this type of measurement instruments are increasingly used in clinical arena.

  10. A computerized adaptive version of the SF-36 is feasible for clinic and Internet administration in adults with HIV.

    Science.gov (United States)

    Turner-Bowker, Diane M; Saris-Baglama, Renee N; DeRosa, Michael A; Giovannetti, Erin R; Jensen, Roxanne E; Wu, Albert W

    2012-01-01

    DYNHA SF-36 is a computerized adaptive test version of the SF-36 Health Survey. The feasibility of administering a modified DYNHA SF-36 to adults with HIV was evaluated with Johns Hopkins University Moore (HIV) Clinic patients (N=100) and Internet consumer health panel members (N=101). Participants completed the DYNHA SF-36, modified to capture seven health domains [(physical function (PF), role function (RF, without physical or emotional attribution), bodily pain (BP), general health, vitality (VT), social function (SF), mental health (MH)], and scored to produce two summary components [Physical Component Summary (PCS), Mental Component Summary (MCS)]. Item-response theory-based response consistency, precision, mean scores, and discriminant validity were examined. A higher percentage of Internet participants responded consistently to the DYNHA SF-36. For each domain, three standard deviations were covered with five items (90% reliability); however, RF and SF scores were less precise at the upper end of measurement (better functioning). Mean scores were slightly higher for the Internet sample, with the exception of VT and MCS. Clinic and Internet participants reporting an AIDS diagnosis had significantly lower mean PCS and PF scores than those without a diagnosis. Additionally, significantly lower RF and BP scores were found for Internet participants reporting an AIDS diagnosis. The measure was well accepted by the majority of participants, although Internet respondents provided lower ratings for the tool's usefulness. The DYNHA SF-36 has promise for measuring the impact of HIV and its treatment in both the clinic setting and through telemonitoring.

  11. Human TM9SF4 Is a New Gene Down-Regulated by Hypoxia and Involved in Cell Adhesion of Leukemic Cells.

    Directory of Open Access Journals (Sweden)

    Rosa Paolillo

    Full Text Available The transmembrane 9 superfamily protein member 4, TM9SF4, belongs to the TM9SF family of proteins highly conserved through evolution. TM9SF4 homologs, previously identified in many different species, were mainly involved in cellular adhesion, innate immunity and phagocytosis. In human, the function and biological significance of TM9SF4 are currently under investigation. However, TM9SF4 was found overexpressed in human metastatic melanoma and in a small subset of acute myeloid leukemia (AMLs and myelodysplastic syndromes, consistent with an oncogenic function of this gene.In this study, we first analyzed the expression and regulation of TM9SF4 in normal and leukemic cells and identified TM9SF4 as a gene highly expressed in human quiescent CD34+ hematopoietic progenitor cells (HPCs, regulated during monocytic and granulocytic differentiation of HPCs, both lineages giving rise to mature myeloid cells involved in adhesion, phagocytosis and immunity. Then, we found that TM9SF4 is markedly overexpressed in leukemic cells and in AMLs, particularly in M2, M3 and M4 AMLs (i.e., in AMLs characterized by the presence of a more or less differentiated granulocytic progeny, as compared to normal CD34+ HPCs. Proliferation and differentiation of HPCs occurs in hypoxia, a physiological condition in bone marrow, but also a crucial component of cancer microenvironment. Here, we investigated the impact of hypoxia on TM9SF4 expression in leukemic cells and identified TM9SF4 as a direct target of HIF-1α, downregulated in these cells by hypoxia. Then, we found that the hypoxia-mediated downregulation of TM9SF4 expression is associated with a decrease of cell adhesion of leukemic cells to fibronectin, thus demonstrating that human TM9SF4 is a new molecule involved in leukemic cell adhesion.Altogether, our study reports for the first time the expression of TM9SF4 at the level of normal and leukemic hematopoietic cells and its marked expression at the level of AMLs

  12. Human factors evaluation of man-machine interface for periodic safety review of nuclear power plants

    International Nuclear Information System (INIS)

    Lee, Yong Hee; Lee, Jung Woon; Park, Jae Chang; Hwang, In Koo; Lee, Hyun Cheol; Jang, Tong Il; Ku, Jin Young; Kim, Soo Jin

    2004-12-01

    This report describes the research results of human factors assessment on the MMI(Man Machine Interface) equipment as part of Periodic Safety Review(PSR) of Nuclear Power Plants(NPPs). As MMI is a key factor among human factors to be reviewed in PSR, we reviewed the MMI components of nuclear power plants in aspect of human factors engineering. The availability, suitability, and effectiveness of the MMI devices were chosen to be reviewed. The MMI devices were investigated through the review of design documents related to the MMI, survey of control panels, evaluation of experts, and experimental assessment. Checklists were used to perform this assessment and record the review results. The items mentioned by the expert comments to review in detail in relation with task procedures were tested by experiments with operators' participation. For some questionable issues arisen during this MMI review, operator workload and possibility of errors in operator actions were analysed. The reviewed MMI devices contain MCR(Main Control Room), SPDS(Safety Parameter Display System), RSP(Remote Shutdown Panel), and the selected LCBs(Local Control Boards) importantly related to safety. As results of the assessments, any significant problem challenging the safety was not found on human factors in the MMI devices. However, several small items to be changed and improved in suitability of MMI devices were discovered. An action plan is recommended to accommodate the suggestions and review comments. It will enhance the plant safety on MMI area

  13. Simplified probabilistic approach to determine safety factors in deterministic flaw acceptance criteria

    International Nuclear Information System (INIS)

    Barthelet, B.; Ardillon, E.

    1997-01-01

    The flaw acceptance rules in nuclear components rely on deterministic criteria supposed to ensure the safe operating of plants. The interest of having a reliable method of evaluating the safety margins and the integrity of components led Electricite de France to launch a study to link safety factors with requested reliability. A simplified analytical probabilistic approach is developed to analyse the failure risk in Fracture Mechanics. Assuming lognormal distributions of the main random variables, it is possible considering a simple Linear Elastic Fracture Mechanics model, to determine the failure probability as a function of mean values and logarithmic standard deviations. The 'design' failure point can be analytically calculated. Partial safety factors on the main variables (stress, crack size, material toughness) are obtained in relation with reliability target values. The approach is generalized to elastic plastic Fracture Mechanics (piping) by fitting J as a power law function of stress, crack size and yield strength. The simplified approach is validated by detailed probabilistic computations with PROBAN computer program. Assuming reasonable coefficients of variations (logarithmic standard deviations), the method helps to calibrate safety factors for different components taking into account reliability target values in normal, emergency and faulted conditions. Statistical data for the mechanical properties of the main basic materials complement the study. The work involves laboratory results and manufacture data. The results of this study are discussed within a working group of the French in service inspection code RSE-M. (authors)

  14. Scoring Mental Health Quality of Life With the SF-36 in Patients With and Without Diabetes Foot Complications.

    Science.gov (United States)

    Ahn, Junho; Del Core, Michael A; Wukich, Dane K; Liu, George T; Lalli, Trapper; VanPelt, Michael D; La Fontaine, Javier; Lavery, Lawrence A; Raspovic, Katherine M

    2018-03-01

    The aim of this study was to examine if using orthogonal and oblique factor analysis detect changes in health-related quality of life differently in diabetic patients on the Short Form-36 (SF-36) survey. A total of 155 patients had diabetic foot complications (DFC), and 145 patients had no DFCs. The SF-36 Physical Component Summary (PCS) and Mental Component Summary (MCS) scores were calculated using scoring coefficients determined by orthogonal and oblique rotation principle component analyses of the subscales. The DFC group had lower orthogonal ( P < .00001) and oblique PCS scores ( P < .00001). However, despite lower Mental Health subscale scores in the patients with DFCs, orthogonal MCS scores ( P = .156) did not differ. In contrast, the oblique MCS scores reflected the difference in the Mental Health subscale ( P = .0005). Orthogonal and oblique PCS scores did not differ significantly. However, orthogonal MCS scores were significantly higher than oblique MCS scores in those with DFCs ( P = .0004) and without DFCs ( P = .005). The shorter, 12-item SF-12 survey demonstrated similar results. Poorer physical function leads to higher orthogonal MCS scores than if determined by oblique scoring coefficients since Physical Function, Bodily Pain, and General Health are weighted more negatively in orthogonal coefficients when calculating the MCS score. Oblique scoring coefficients may address this issue, but further study is necessary to confirm whether oblique MCS scores accurately represent the mental health of patients with diabetic foot disease.

  15. The human factor in the organisation and regulation of nuclear safety

    International Nuclear Information System (INIS)

    Bordes, F.; Savagner, J.-M.; Snanoudj, G.

    1981-10-01

    The TMI accident has brought to light the importance of the human factor in the safe operation of complex installations such as nuclear power plants. On this basis, the paper outlines the institutional framework for nuclear safety in France and reports on EDF practices in human resources management as well as in the improvement of working premises (control rooms) to optimize human behaviour in accident conditions. Finally, the interaction of labour laws on nuclear law in connection with safety is described. (NEA) [fr

  16. Antimicrobial and antioxidant surface modification toward a new silk-fibroin (SF)-L-Cysteine material for skin disease management

    Science.gov (United States)

    Nogueira, Frederico; Granadeiro, Luíza; Mouro, Claudia; Gouveia, Isabel C.

    2016-02-01

    A novel dressing material - silk fibroin fabric (SF)-L-Cysteine (L-Cys) - is here developed to be used as standard treatment for atopic dermatitis (AD), which combines comfort, thermic, and tensile strength properties of silk materials with antioxidant and antimicrobial effects of L-Cys. A careful understanding about the linking strategies is needed in order not to compromise the bioavailability of L-Cys and deplenish its bioactivity. Durability was also addressed through washing cycles and compared with hospital requirements, according to international Standard EN ISO 105-C06:2010. The present research also analyze the interactions between Staphylococcus aureus and SF-L-Cys under simulating conditions of AD and demonstrated the effectiveness of a double covalent grafting, with the importance of SF tyrosine (Tyr) covalent linkage with L-Cys (SF-g-L-Cys/Tyr-g-L-Cys) even after several washing cycles, twenty five, whereas for a disposable application a single covalent mechanism of grafting L-Cys proved to be sufficient (SF-g-L-Cys). Results showed effective antimicrobial activities exhibiting higher inhibition ratios of 98.65% for SF-g-L-Cys after 5 washing cycles, whereas 97.55% for SF-g-L-Cys/Tyr-g-L-Cys after 25 washing cycles, both at pH 9.5 grafting strategy. Furthermore, it is also reported a non-protumoral effect of L-Cys. A new advance is herein achieved at the world of medical antimicrobial textiles tailored to address wound moisture environment and exudate self-cleaning, which may open novel applications as complementary therapy for AD disease.

  17. TM6SF2 and MAC30, new enzyme homologues in sterol metabolism and common metabolic disease.

    Directory of Open Access Journals (Sweden)

    Luis eSanchez-Pulido

    2014-12-01

    Full Text Available Carriers of the Glu167Lys coding variant in the TM6SF2 gene have recently been identified as being more susceptible to non-alcoholic fatty liver disease (NAFLD, yet exhibit lower levels of circulating lipids and hence are protected against cardiovascular disease. Despite the physiological importance of these observations, the molecular function of TM6SF2 remains unknown, and no sequence similarity with functionally characterised proteins has been identified. In order to trace its evolutionary history and to identify functional domains, we embarked on a computational protein sequence analysis of TM6SF2. We identified a new domain, the EXPERA domain, which is conserved among TM6SF, MAC30/TMEM97 and EBP (D8,D7 sterol isomerase protein families. EBP mutations are the cause of chondrodysplasia punctata 2 X-linked dominant (CDPX2, also known as Conradi-Hünermann-Happle syndrome, a defective cholesterol biosynthesis disorder. Our analysis of evolutionary conservation among EXPERA domain-containing families and the previously suggested catalytic mechanism for the EBP enzyme, indicate that TM6SF and MAC30/TMEM97 families are both highly likely to possess, as for the EBP family, catalytic activity as sterol isomerases. This unexpected prediction of enzymatic functions for TM6SF and MAC30/TMEM97 is important because it now permits detailed experiments to investigate the function of these key proteins in various human pathologies, from cardiovascular disease to cancer.

  18. Validation of Catquest-9SF-A Visual Disability Instrument to Evaluate Patient Function After Corneal Transplantation.

    Science.gov (United States)

    Claesson, Margareta; Armitage, W John; Byström, Berit; Montan, Per; Samolov, Branka; Stenvi, Ulf; Lundström, Mats

    2017-09-01

    Catquest-9SF is a 9-item visual disability questionnaire developed for evaluating patient-reported outcome measures after cataract surgery. The aim of this study was to use Rasch analysis to determine the responsiveness of Catquest-9SF for corneal transplant patients. Patients who underwent corneal transplantation primarily to improve vision were included. One group (n = 199) completed the Catquest-9SF questionnaire before corneal transplantation and a second independent group (n = 199) completed the questionnaire 2 years after surgery. All patients were recorded in the Swedish Cornea Registry, which provided clinical and demographic data for the study. Winsteps software v.3.91.0 (Winsteps.com, Beaverton, OR) was used to assess the fit of the Catquest-9SF data to the Rasch model. Rasch analysis showed that Catquest-9SF applied to corneal transplant patients was unidimensional (infit range, 0.73-1.32; outfit range, 0.81-1.35), and therefore, measured a single underlying construct (visual disability). The Rasch model explained 68.5% of raw variance. The response categories of the 9-item questionnaire were ordered, and the category thresholds were well defined. Item difficulty matched the level of patients' ability (0.36 logit difference between the means). Precision in terms of person separation (3.09) and person reliability (0.91) was good. Differential item functioning was notable for only 1 item (satisfaction with vision), which had a differential item functioning contrast of 1.08 logit. Rasch analysis showed that Catquest-9SF is a valid instrument for measuring visual disability in patients who have undergone corneal transplantation primarily to improve vision.

  19. Effect of Fibroblast Growth Factor 2 on Equine Synovial Fluid Chondroprogenitor Expansion and Chondrogenesis

    OpenAIRE

    Bianchessi, Marta; Chen, Yuwen; Durgam, Sushmitha; Pondenis, Holly; Stewart, Matthew

    2015-01-01

    Mesenchymal stem cells have been identified in the synovial fluid of several species. This study was conducted to characterize chondroprogenitor (CP) cells in equine synovial fluid (SF) and to determine the effect of fibroblast growth factor 2 (FGF-2) on SF-CP monolayer proliferation and subsequent chondrogenesis. We hypothesized that FGF-2 would stimulate SF-CP proliferation and postexpansion chondrogenesis. SF aspirates were collected from adult equine joints. Colony-forming unit (CFU) assa...

  20. 78 FR 66972 - Submission for Review: Designation of Beneficiary: Civil Service Retirement System (CSRS), SF 2808

    Science.gov (United States)

    2013-11-07

    ... OFFICE OF PERSONNEL MANAGEMENT Submission for Review: Designation of Beneficiary: Civil Service Retirement System (CSRS), SF 2808 AGENCY: U.S. Office of Personnel Management. ACTION: 60-Day notice and... Retirement System, SF 2808. As required by the Paperwork Reduction Act of 1995 (Pub. L. 104-13, 44 U.S.C...

  1. Evaluation of design safety factors for time-dependent buckling

    International Nuclear Information System (INIS)

    Stone, C.M.; Nickell, R.E.

    1977-02-01

    The ASME Boiler and Pressure Vessel Code rules concerning time-dependent (creep) buckling for Class 1 nuclear components have recently been changed. Previous requirements for a factor of ten on service life have been replaced with a factor of safety of 1.5 on loading for load-controlled buckling. This report examines the supposed equivalence of the two rules from the standpoint of materials behavior--specifically, the secondary creep strain rate exponent. The comparison is made using results obtained numerically for an axially-loaded, cylindrical shell with varying secondary creep exponents. A computationally efficient scheme for analyzing creep buckling problems is also presented

  2. Full Genome Sequence and sfRNA Interferon Antagonist Activity of Zika Virus from Recife, Brazil.

    Directory of Open Access Journals (Sweden)

    Claire L Donald

    2016-10-01

    Full Text Available The outbreak of Zika virus (ZIKV in the Americas has transformed a previously obscure mosquito-transmitted arbovirus of the Flaviviridae family into a major public health concern. Little is currently known about the evolution and biology of ZIKV and the factors that contribute to the associated pathogenesis. Determining genomic sequences of clinical viral isolates and characterization of elements within these are an important prerequisite to advance our understanding of viral replicative processes and virus-host interactions.We obtained a ZIKV isolate from a patient who presented with classical ZIKV-associated symptoms, and used high throughput sequencing and other molecular biology approaches to determine its full genome sequence, including non-coding regions. Genome regions were characterized and compared to the sequences of other isolates where available. Furthermore, we identified a subgenomic flavivirus RNA (sfRNA in ZIKV-infected cells that has antagonist activity against RIG-I induced type I interferon induction, with a lesser effect on MDA-5 mediated action.The full-length genome sequence including non-coding regions of a South American ZIKV isolate from a patient with classical symptoms will support efforts to develop genetic tools for this virus. Detection of sfRNA that counteracts interferon responses is likely to be important for further understanding of pathogenesis and virus-host interactions.

  3. 48 CFR 53.301-1445 - SF 1445, Labor Standards Interview.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false SF 1445, Labor Standards Interview. 53.301-1445 Section 53.301-1445 Federal Acquisition Regulations System FEDERAL ACQUISITION... Interview. ER02JA97.021 [62 FR 255, Jan. 2, 1997] ...

  4. Evaluation of the Efficacy of the Mini Parasep SF Faecal Parasite ...

    African Journals Online (AJOL)

    Evaluation of the Efficacy of the Mini Parasep SF Faecal Parasite Concentrator; A New Technique against the Direct Smear and Formol Ether Concentration Technique for the Detection of Intestinal Parasites in Stool.

  5. A global model for SF6 plasmas coupling reaction kinetics in the gas phase and on the surface of the reactor walls

    International Nuclear Information System (INIS)

    Kokkoris, George; Panagiotopoulos, Apostolos; Gogolides, Evangelos; Goodyear, Andy; Cooke, Mike

    2009-01-01

    Gas phase and reactor wall-surface kinetics are coupled in a global model for SF 6 plasmas. A complete set of gas phase and surface reactions is formulated. The rate coefficients of the electron impact reactions are based on pertinent cross section data from the literature, which are integrated over a Druyvesteyn electron energy distribution function. The rate coefficients of the surface reactions are adjustable parameters and are calculated by fitting the model to experimental data from an inductively coupled plasma reactor, i.e. F atom density and pressure change after the ignition of the discharge. The model predicts that SF 6 , F, F 2 and SF 4 are the dominant neutral species while SF 5 + and F - are the dominant ions. The fit sheds light on the interaction between the gas phase and the reactor walls. A loss mechanism for SF x radicals by deposition of a fluoro-sulfur film on the reactor walls is needed to predict the experimental data. It is found that there is a net production of SF 5 , F 2 and SF 6 , and a net consumption of F, SF 3 and SF 4 on the reactor walls. Surface reactions as well as reactions between neutral species in the gas phase are found to be important sources and sinks of the neutral species.

  6. Amorphous hydrogenated carbon films treated by SF{sub 6} plasma

    Energy Technology Data Exchange (ETDEWEB)

    Marins, N M S; Mota, R P; Santos, D C R; Honda, R Y; Kayama, M E; Kostov, K G; Algatti, M A [Laboratorio de Plasma, Faculdade de Engenharia, UNESP, Av. Dr. Ariberto Pereira da Cunha-333, 12516-410, Guaratingueta, SP (Brazil); Cruz, N C; Rangel, E C, E-mail: nazir@feg.unesp.b [Laboratorio de Plasmas Tecnologicos, Unidade Diferenciada Sorocaba/Ipero, UNESP, Av. Tres de Marco-511, 18085-180, Sorocaba, SP (Brazil)

    2009-05-01

    This work was performed to verify the chemical structure, mechanical and hydrophilic properties of amorphous hydrogenated carbon films prepared by plasma enhanced chemical vapor deposition, using acetylene/argon mixture as monomer. Films were prepared in a cylindrical quartz reactor, fed by 13.56 MHz radiofrequency. The films were grown during 5 min, for power varying from 25 to 125 W at a fixed pressure of 9.5 Pa. After deposition, all samples were treated by SF{sub 6} plasma with the aim of changing their hydrophilic character. Film chemical structure investigated by Raman spectroscopy, revealed the increase of sp{sup 3} hybridized carbon bonds as the plasma power increases. Hardness measurements performed by the nanoindentation technique showed an improvement from 5 GPa to 14 GPa following the increase discharge power. The untreated films presented a hydrophilic character, which slightly diminished after SF{sub 6} plasma treatment.

  7. Estimating health state utility values for comorbid health conditions using SF-6D data.

    Science.gov (United States)

    Ara, Roberta; Brazier, John

    2011-01-01

    When health state utility values for comorbid health conditions are not available, data from cohorts with single conditions are used to estimate scores. The methods used can produce very different results and there is currently no consensus on which is the most appropriate approach. The objective of the current study was to compare the accuracy of five different methods within the same dataset. Data collected during five Welsh Health Surveys were subgrouped by health status. Mean short-form 6 dimension (SF-6D) scores for cohorts with a specific health condition were used to estimate mean SF-6D scores for cohorts with comorbid conditions using the additive, multiplicative, and minimum methods, the adjusted decrement estimator (ADE), and a linear regression model. The mean SF-6D for subgroups with comorbid health conditions ranged from 0.4648 to 0.6068. The linear model produced the most accurate scores for the comorbid health conditions with 88% of values accurate to within the minimum important difference for the SF-6D. The additive and minimum methods underestimated or overestimated the actual SF-6D scores respectively. The multiplicative and ADE methods both underestimated the majority of scores. However, both methods performed better when estimating scores smaller than 0.50. Although the range in actual health state utility values (HSUVs) was relatively small, our data covered the lower end of the index and the majority of previous research has involved actual HSUVs at the upper end of possible ranges. Although the linear model gave the most accurate results in our data, additional research is required to validate our findings. Copyright © 2011 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  8. Regulatory Activities on Civil Nuclear Safety Equipment in China

    International Nuclear Information System (INIS)

    Gaoshang, Lu; Choi, Kwang Sik

    2011-01-01

    It is stipulated in IAEA Fundamental Safety Principles (SF1) that the fundamental safety objective is to protect people and the environment from harmful effects of ionizing radiation. The fundamental safety objective applies for all facilities and activities and for all stages over the lifetime of a facility or radiation source, including planning, sitting, design, manufacturing, construction, commissioning and operation, as well as decommissioning and closure. So, according to the requirement, the related activities such as design, manufacturing, installation and non-destructive test that conducted on civil nuclear equipment should be well controlled by the vendors, the owner of the nuclear power plants and the regulatory body. To insure the quality of those equipment, Chinese government had taken a series of measures to regulate the related activities on them

  9. Convergent validity between SF-36 and WHOQOL-BREF in older adults

    Directory of Open Access Journals (Sweden)

    Paula Costa Castro

    2014-02-01

    Full Text Available OBJECTIVE : To compare the reliability and convergent validity of instruments assessing quality of life in Brazilian older adults. METHODS : Cross-sectional study of 278 literate, community-dwelling older adults attending a municipal university for the elderly in Sao Carlos, SP, Southeastern Brazil between 2006 and 2008. The Brazilian versions of the SF-36 and WHOQOL-BREF instruments to assess quality of life were compared. Cronbach’s alpha coefficient was used to estimate reliability and Pearson’s correlation for comparison between the two scales. RESULTS : Most of participants were women (87.8% with a mean age of 63.83±7.22 years. Both scales showed an acceptable internal consistency – WHOQOL-BREF Cronbach’s alpha was 0.832 and SF-36 was 0.868. There was a weak (r ≤ 0.6 correlation between the related fields in the two questionnaires. CONCLUSIONS : The SF-36 and WHOQOL-BREF are reliable instruments for clinical and research uses in Brazilian older women. To select one, researchers should consider which aspects of quality of life they aim to capture because of weak convergent validity signs. This study’s results indicate that WHOQOL-BREF may be more relevant to evaluate changes in the quality of life of older women because it prioritizes responses to the aging process and avoids focusing on impairment.

  10. Proposal of criteria for evaluation of engineering safety factors of VVER core parameters

    International Nuclear Information System (INIS)

    Shishkov, L.; Tsyganov, S.; Dementiev, V.

    2009-01-01

    The paper states that the regulatory documentation, as a rule, do not give explicit recommendations on formation techniques of engineering safety factors for design limited parameters of normal operation (K eng ). The AER countries use different approaches to K eng evaluation (sometimes even one country in relation of various power units). The paper suggests the development of uniform rules to be used in calculation of engineering safety factor for all VVER reactors. The paper presents principal problems that must be solved in the course of the discussion, and in the form of an exercise suggests the way of their solution. (authors)

  11. Proposal of criteria for evaluation of engineering safety factors of WWER core parameters

    International Nuclear Information System (INIS)

    Shishkov, L.; Tsyganov, S.; Dementiev, V.

    2009-01-01

    The paper states that the regulatory documentation, as a rule, do not give explicit recommendations on formation techniques of engineering safety factors for design limited parameters of normal operation. The AER countries use different approaches to evaluation (sometimes even one country in relation of various power units). The paper suggests the development of uniform rules to be used in calculation of engineering safety factor for all WWER reactors. The paper presents principal problems that must be solved in the course of the discussion, and in the form of an exercise suggests the way of their solution. (Authors)

  12. Exome-wide association study identifies a TM6SF2 variant that confers susceptibility to nonalcoholic fatty liver disease

    DEFF Research Database (Denmark)

    Kozlitina, Julia; Smagris, Eriks; Stender, Stefan

    2014-01-01

    Nonalcoholic fatty liver disease (NAFLD) is the most common form of liver disease. To elucidate the molecular basis of NAFLD, we performed an exome-wide association study of liver fat content. Three variants were associated with higher liver fat levels at the exome-wide significance level of 3.......6 × 10(-7): two in PNPLA3, an established locus for NAFLD, and one (encoding p.Glu167Lys) in TM6SF2, a gene of unknown function. The TM6SF2 variant encoding p.Glu167Lys was also associated with higher circulating levels of alanine transaminase, a marker of liver injury, and with lower levels of low...... knockdown of Tm6sf2 in mice increased liver triglyceride content by threefold and decreased very-low-density lipoprotein (VLDL) secretion by 50%. Taken together, these data indicate that TM6SF2 activity is required for normal VLDL secretion and that impaired TM6SF2 function causally contributes to NAFLD....

  13. Interlaboratory comparison of SF6-determinations used within the framework of tracer releases

    International Nuclear Information System (INIS)

    Vanderborght, B.

    1985-01-01

    An international intercomparison exercise, for determination of trace amounts of SF 6 in air was set up, to make interchange of experimental results or common tracer experiments possible between European laboratories. SCK, Belgium made 6 SF 6 samples in the 10 ppt to 10 ppb range. Samples were analyzed by CEN (F), CERL (UK), JRC (I), KEMA (NL), LHW (NL), NILU (N), APL (DK), WDB (FRG) and SCK (B). Very good agreement was obtained between SCK, CERL, APL and NILU. LHW and KEMA obtained systematically lower results than those four laboratories; the problem might originate in manufacturing of mother samples under high pressure. CEN and WDB work in a higher concentration range and their analysis of trace amounts is less accurate. JRC samples were contaminated and accuracy of their analysis cannot be evaluated. SF 6 samples in PVC plastic bags are not stable enough over long periods, especially with ambient temperature higher than 30 0 C. Transport of samples in plastic bags over long distances is not advisable when transport conditions cannot be well controlled

  14. Application of the AHP method to analyze the significance of the factors affecting road traffic safety

    Directory of Open Access Journals (Sweden)

    Justyna SORDYL

    2015-06-01

    Full Text Available Over the past twenty years, the number of vehicles registered in Poland has grown rapidly. At the same time, a relatively small increase in the length of the road network has been observed. As a result of the limited capacity of available infrastructure, it leads to significant congestion and to increase of the probability of road accidents. The overall level of road safety depends on many factors - the behavior of road users, infrastructure solutions and the development of automotive technology. Thus the detailed assessment of the importance of individual elements determining road safety is difficult. The starting point is to organize the factors by grouping them into categories which are components of the DVE system (driver - vehicle - environment. In this work, to analyze the importance of individual factors affecting road safety, the use of analytic hierarchy process method (AHP was proposed. It is one of the multi-criteria methods which allows us to perform hierarchical analysis of the decision process, by means of experts’ opinions. Usage of AHP method enabled us to evaluate and rank the factors affecting road safety. This work attempts to link the statistical data and surveys in significance analysis of the elements determining road safety.

  15. 48 CFR 53.235 - Research and Development Contracting (SF 298).

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Research and Development Contracting (SF 298). 53.235 Section 53.235 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION (CONTINUED) CLAUSES AND FORMS FORMS Prescription of Forms 53.235 Research and Development...

  16. Preparation of the requirements for the safety regulation related to human and organizational factors

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-15

    The outline of the project in the current fiscal year is to investigate and analyze issues associated with Human and Organizational Factors involved in incidents of nuclear facilities, and to study and develop evaluation methods of these countermeasures. The guideline to evaluate licensee's safety culture and root cause analysis (RCA) had been developed for further improving safety on nuclear power plants at 2007. These guidelines have been used at regulatory inspection since that time. Based on experience of using these existing guidelines, some activities for improving guidelines are now under investigation; these are selecting candidate quantitative indicators for safety culture evaluation and researching good practices for RCA issues. JNES implemented human factor analysis about 18 domestic events including the Fukushima Dai-ichi nuclear power plant accident. (author)

  17. Structural evolution of the P22-like phages: Comparison of Sf6 and P22 procapsid and virion architectures

    Energy Technology Data Exchange (ETDEWEB)

    Parent, Kristin N. [University of California, San Diego, Department of Chemistry and Biochemistry, La Jolla, CA 92093 (United States); Gilcrease, Eddie B. [University of Utah School of Medicine, Division of Microbiology and Immunology, Department of Pathology, Salt Lake City, UT 84112 (United States); Casjens, Sherwood R., E-mail: sherwood.casjens@path.utah.edu [University of Utah School of Medicine, Division of Microbiology and Immunology, Department of Pathology, Salt Lake City, UT 84112 (United States); Baker, Timothy S., E-mail: tsb@ucsd.edu [University of California, San Diego, Department of Chemistry and Biochemistry, La Jolla, CA 92093 (United States); University of California, San Diego, Division of Biological Sciences, La Jolla, CA 92093 (United States)

    2012-06-05

    Coat proteins of tailed, dsDNA phages and in herpesviruses include a conserved core similar to the bacteriophage HK97 subunit. This core is often embellished with other domains such as the telokin Ig-like domain of phage P22. Eighty-six P22-like phages and prophages with sequenced genomes share a similar set of virion assembly genes and, based on comparisons of twelve viral assembly proteins (structural and assembly/packaging chaperones), these phages are classified into three groups (P22-like, Sf6-like, and CUS-3-like). We used cryo-electron microscopy and 3D image reconstruction to determine the structures of Sf6 procapsids and virions ({approx} 7 A resolution), and the structure of the entire, asymmetric Sf6 virion (16-A resolution). The Sf6 coat protein is similar to that of P22 yet it has differences in the telokin domain and in its overall quaternary organization. Thermal stability and agarose gel experiments show that Sf6 virions are slightly less stable than those of P22. Finally, bacterial host outer membrane proteins A and C were identified in lipid vesicles that co-purify with Sf6 particles, but are not components of the capsid.

  18. 75 FR 69912 - Pipeline Safety: Control Room Management/Human Factors

    Science.gov (United States)

    2010-11-16

    ... 192 and 195 [Docket ID PHMSA-2007-27954] RIN 2137-AE64 Pipeline Safety: Control Room Management/Human... Control Room Management/Human Factors rule at 49 CFR 192.631 and 195.446. The NPRM proposes to expedite... rule and to engage in open discussions with the agency at PHMSA's Control Room Management...

  19. Mine detection using SF-GPR: A signal processing approach for resolution enhancement and clutter reduction

    DEFF Research Database (Denmark)

    Karlsen, Brian; Jakobsen, Kaj Bjarne; Larsen, Jan

    2001-01-01

    Proper clutter reduction is essential for Ground Penetrating Radar data since low signal-to-clutter ratio prevent correct detection of mine objects. A signal processing approach for resolution enhancement and clutter reduction used on Stepped-Frequency Ground Penetrating Radar (SF-GPR) data is pr....... The clutter reduction method is based on basis function decomposition of the SF-GPR time-series from which the clutter and the signal are separated....

  20. Breakdown Voltage of CF3CHCl2 gas an Alternative to SF6 Gas using HV Test and Bonding Energy Methods

    Science.gov (United States)

    Juliandhy, Tedy; Haryono, T.; Suharyanto; Perdana, Indra

    2018-04-01

    For more than two decades of Sulphur Hexafluoride (SF6) gases is used as a gas insulation in high voltage equipment especially in substations. In addition to getting an advantage as an insulating gas. SF6 gas is recognized as one of the greenhouse effect gases that cause global warming. Under the Kyoto Protocol, SF6 gas is one of those gases whose use is restricted and gradually reduced to the presence of a replacement gas for SF6 gas. One of the alternative gas alternatives which have the potential of replacing SF6 gas as an insulating gas in Gas Insulated Switchgear (GIS) equipment in the substation is Dichlorotrifluoroethane (CF3CHCl2) gas. The purpose of this paper is to enable a comparison of breakdown voltage with high voltage test and method of calculating Bonding energy to Dichlorotrifluoroethane gas as substitute gas for SF6 gas. At 0.1 bar gas pressure obtained an average breakdown voltage of 18.68 kV / mm at 25oC chamber temperature and has the highest breakdown voltage at 50oC with a breakdown voltage of 19.56 kV / mm. The CF3CHCl2 gas has great potential as an insulating gas because it has more insulation ability high of SF6 gas, and is part of the gas recommended under the Kyoto Protocol. Gas CF3CHCl2 has the capacity to double the value of electronegativity greater than SF6 gas as a major requirement of gas isolation and has a value of Global Warming Potential (GWP) and Ozone Depleting lower than from SF6 gas.

  1. SF3A1 and pancreatic cancer: new evidence for the association of the spliceosome and cancer.

    Science.gov (United States)

    Tian, Jing; Liu, Yaping; Zhu, Beibei; Tian, Yao; Zhong, Rong; Chen, Wei; Lu, Xinghua; Zou, Li; Shen, Na; Qian, Jiaming; Li, Hui; Miao, Xiaoping; Wang, Li

    2015-11-10

    A two-stage case-control study was conducted to examine the association between six candidate U2-depedent spliceosome genes (SRSF1, SRSF2, SF3A1, SF3B1, SF1 and PRPF40B) and pancreatic cancer (PC). Subjects with one or two T alleles at rs2074733 in SF3A1 had a lower risk of PC compared to those with two C alleles in combined two populations (OR: 0.59, 95% confidence interval: 0.48-0.73, False discovery rate (FDR)-P = 1.5E-05). Moreover, the presence of the higher-risk genotype at rs2074733 plus smoking or drinking had synergic effects on PC risk. These findings illustrate that RNA splicing-related genes appear to be associated with the occurrence of PC, and show synergic interactions with smoking and drinking in the additive model. In the future, our novel findings should be further confirmed by functional studies and independent large-scale population studies.

  2. Optimizing the switching time for 400 kV SF6 circuit breakers

    Science.gov (United States)

    Ciulica, D.

    2018-01-01

    This paper presents real-time voltage and current analysis for optimizing the wave switching point of the circuit breaker SF6. Circuit Breaker plays an important role in power systems. It provides protection for equipment in embedded stations in transport networks. SF6 Circuit Breaker is very important equipment in Power Systems, which is used for up to 400 kV due to its excellent performance. The controlled switching is used to eliminate transient modes and electrodynamic and dielectric charges in the network at manual switching of capacitor, shunt reactors and power transformers. These effects reduce the reliability and lifetime of the equipment installed on the network, or may lead to erroneous protection.

  3. Cultural factors influencing safety need to be addressed in design and operation of technology.

    Science.gov (United States)

    Meshkati, N

    1996-10-01

    Cultural factors which influence aviation safety in aircraft design, air traffic control, and human factors training are examined. Analysis of the Avianca Flight 052 crash in New York in January, 1990, demonstrates the catastrosphic effects cultural factors can play. Cultural factors include attitude toward work and technology, organizational hierarchy, religion, and population stereotyping.

  4. Factors that impact on the safety of patient handovers: An interview study

    DEFF Research Database (Denmark)

    Siemsen, Inger Margrete; Madsen, Marlene Dyrløv; Pedersen, Lene Funck

    2012-01-01

    Aims: Improvement of clinical handover is fundamental to meet the challenges of patient safety. The primary aim of this interview study is to explore healthcare professionals’ attitudes and experiences with critical episodes in patient handover in order to elucidate factors that impact on handover...... from ambulance to hospitals and within and between hospitals. The secondary aim is to identify possible solutions to optimise handovers, defined as “situations where the professional responsibility for some or all aspects of a patient’s diagnosis, treatment or care is transferred to another person...... on patient safety in handover situations: communication, information, organisation, infrastructure, professionalism, responsibility, team awareness, and culture. Conclusions: The eight factors identified indicate that handovers are complex situations. The organisation did not see patient handover...

  5. Understanding the relationship between the EQ-5D, SF-6D, HAQ and disease activity in inflammatory arthritis.

    LENUS (Irish Health Repository)

    Adams, Roisin

    2012-02-01

    BACKGROUND: The growth of economic analyses and in particular cost-utility analyses (CUA), which use the QALY as a measure of outcome, has heightened the interest in the methodologies used to calculate the QALY. The EQ-5D has produced quite different utility values from that of the SF-6D. This article seeks to understand these differences using a cohort of patients with inflammatory arthritis. OBJECTIVE: To examine the relationship between the disease-specific measure, Health Assessment Questionnaire (HAQ) disability index (DI) and the preference-based measures, SF-6D, EQ-5D and European League Against Arthritis (EULAR) Disease Activity Score (DAS) in patients with rheumatoid arthritis (RA) and psoriatic arthritis (PsA). METHODS: Patients with RA and PsA (n = 504) attending a tertiary rheumatology referral centre completed the HAQ, SF-6D and the EQ-5D before starting biological therapy and again 12 months later. The SF-36 was converted into a utility using the preference-based SF-6D. Clinical outcomes such as the DAS, joint counts and laboratory measures were also recorded. We calculated single index utility scores from the preference-based instruments using UK population norms. We used regression analysis to derive a mapping function and calculated utility scores from the HAQDI and the DAS 28. RESULTS: The mean utility observed at baseline for RA was 0.43 for the EQ-5D and 0.54 for the SF-6D and for PsA was 0.49 for the EQ-5D and 0.57 for the SF-6D. The utility gain demonstrated by the EQ-5D was over twice that of the SF-6D. The EQ-5D scored 17% of the RA group as less than 0 (state defined as worse than death); 7% of this group remained less than 0 at follow-up. The distribution of the utility estimates was similar for both RA and PsA. CONCLUSIONS: Our findings draw attention to the impact of states worse than death on the overall distribution for the EQ-5D derived utilities and how these impact on its use in practice. EQ-5D-derived QALY changes are over twice

  6. Risk factors for fishermen's health and safety in Greece

    DEFF Research Database (Denmark)

    Frantzeskou, Elpida; Kastania, Anastasia N; Riza, Elena

    2012-01-01

    Background: This is, to the best of our knowledge, the first occupational health study in Greek fishing. Aim: The aim of the study is to determine the risks for health and safety in Greek fisheries workers by exploring their health status and the health risk factors present in their occupational...... injury, of which half caused more than one day absence, while 14% had a near drowning experience. The health risks factors studied include excessive weight, cardiovascular incidents and dermatological, musculoskeletal, respiratory, hearing, stress, and anxiety problems. The occupational health risk...... factors include alcohol, fatty food consumption, smoking, and lack of physical exercise. Conclusions: The health effects observed are causally related to diet, smoking, and exercise, which in turn relate to the specific working conditions and culture in small-scale fishing that need to be taken...

  7. Risk factors for granuloma formation in children induced by tracheobronchial foreign bodies.

    Science.gov (United States)

    Huang, Zhenghua; Zhou, Ai; Zhang, Jianya; Xie, Lisheng; Li, Qi

    2015-12-01

    The aim of this study was to analyze the risk factors for granuloma formation caused by plant-based tracheobronchial foreign bodies in children, and investigate the underlying pathogenesis. In this retrospective analysis of 153 cases with tracheobronchial foreign bodies (peanuts and watermelon seeds), 35 cases of granuloma formation as granulation group (G), and 118 cases of no granuloma formation as non-granulation group (NG) were studied. Clinical data pertaining to sex (S), age (A), foreign body surface smoothness (SF), foreign body shape (SH), foreign body oil release state (O), the location of foreign bodies (L), and foreign body retention time (T) were collected for statistical analysis. Univariate analysis showed no significant difference between the two groups (G and NG) with respect to S, A, SH and L. Significant factors based on univariate analysis included SF, O and T. Multivariate logistic regression analysis revealed that SF and T were independent risk factors associated with development of granuloma. SF, O and T had relationship with the granuloma formation. Local trauma caused by an irregular and sharp foreign body, and extended period of time represent the main factors causing granuloma formation. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  8. Hazard Management Dealt by Safety Professionals in Colleges: The Impact of Individual Factors

    Directory of Open Access Journals (Sweden)

    Tsung-Chih Wu

    2016-12-01

    Full Text Available Identifying, evaluating, and controlling workplace hazards are important functions of safety professionals (SPs. The purpose of this study was to investigate the content and frequency of hazard management dealt by safety professionals in colleges. The authors also explored the effects of organizational factors/individual factors on SPs’ perception of frequency of hazard management. The researchers conducted survey research to achieve the objective of this study. The researchers mailed questionnaires to 200 SPs in colleges after simple random sampling, then received a total of 144 valid responses (response rate = 72%. Exploratory factor analysis indicated that the hazard management scale (HMS extracted five factors, including physical hazards, biological hazards, social and psychological hazards, ergonomic hazards, and chemical hazards. Moreover, the top 10 hazards that the survey results identified that safety professionals were most likely to deal with (in order of most to least frequent were: organic solvents, illumination, other chemicals, machinery and equipment, fire and explosion, electricity, noise, specific chemicals, human error, and lifting/carrying. Finally, the results of one-way multivariate analysis of variance (MANOVA indicated there were four individual factors that impacted the perceived frequency of hazard management which were of statistical and practical significance: job tenure in the college of employment, type of certification, gender, and overall job tenure. SPs within colleges and industries can now discuss plans revolving around these five areas instead of having to deal with all of the separate hazards.

  9. Heterologous overexpression of sfCherry fluorescent protein in Nannochloropsis salina

    Directory of Open Access Journals (Sweden)

    Nam Kyu Kang

    2015-12-01

    Full Text Available Oleaginous microalgae of the Nannochloropsis genus are considered excellent candidates for biofuels and value-added products owing to their high biomass productivity and lipid content. Here, we report the first overexpression and detection of a heterologous sfCherry fluorescent protein in Nannochloropsis salina in order to develop a transformation toolbox for future genetic improvements. Particle bombardment was employed for transformation, and expression of Shble under the control of TUB and UEP promoters, cloned from N. salina, was used to confer resistance to Zeocin antibiotics, resulting in 5.9 and 4.7 transformants per 108 cells, respectively. Stable integration of the markers into the genome was confirmed using a restriction enzyme site-directed amplification (RESDA PCR. The expression of sfCherry fluorescent protein was confirmed by Western blot analysis and confocal microscopy. These results suggest new possibilities of efficient genetic engineering of Nannochloropsis for the production of biofuels and other biochemicals.

  10. Ozone depleting substances and gases HFCs, PFCs and SF{sub 6}. Consumption and emissions 2003; Ozonlagsnedbrydende stoffer og drivhusgasserne HFC'er PFC'er og SF6. Forbrug og emissioner 2003

    Energy Technology Data Exchange (ETDEWEB)

    Sander Poulsen, T.

    2005-07-01

    The evaluation includes a calculation of actual emissions of HFCs, PFCs and SF{sub 6} in Denmark. In this calculation of actual emissions, the release from stock of greenhouse gases in products has been taken into account, and adjustments have been made for imports and exports of the greenhouse gases in products. The evaluation has partly been prepared to enable Denmark to fulfil its international obligations to provide information within this area, and partly to follow the trend in consumption and emissions of HFCs, PFCs and SF{sub 6}. (BA)

  11. The Effects of Occupational Health and Safety Risk Factors on Job Satisfaction in Hotel Enterprises

    OpenAIRE

    Gonca Kilic; Murat Selim Selvi

    2009-01-01

    Occupational health and safety risk factors can have direct or indirect effects on levels of organizational commitment, job satisfaction, and the job productivity of workers in service companies as well as other types of industries. In this paper, the effects of physical, biological, chemical and socio-psychological risk factors, related to occupational safety and health, encountered in hotel enterprises on job satisfaction were investigated. Questionnaire survey was conducted as a data colle...

  12. Analysis of SF and plasma cytokines provides insights into the mechanisms of inflammatory arthritis and may predict response to therapy.

    Science.gov (United States)

    Wright, Helen L; Bucknall, Roger C; Moots, Robert J; Edwards, Steven W

    2012-03-01

    Biologic drugs have revolutionized the care of RA, but are expensive and not universally effective. To further understand the inflammatory mechanisms underlying RA and identify potential biomarkers predicting response to therapy, we measured multiple cytokine concentrations in SF of patients with inflammatory arthritides (IAs) and, in a subset of patients with RA, correlated this with response to TNF-α inhibition. SF from 42 RA patients and 19 non-RA IA patients were analysed for 12 cytokines using a multiplex cytokine assay. Cytokines were also measured in the plasma of 16 RA patients before and following treatment with anti-TNF-α. Data were analysed using Mann-Whitney U-test, Spearman's rank correlation and cluster analysis with the Kruskal-Wallis test with Dunn's post-test analysis. RA SF contained significantly elevated levels of IL-1β, IL-1ra, IL-2, IL-4, IL-8, IL-10, IL-17, IFN-γ, G-CSF, GM-CSF and TNF-α compared with other IA SF. RA patients who did not respond to anti-TNF therapy had elevated IL-6 in their SF pre-therapy (P < 0.05), whereas responders had elevated IL-2 and G-CSF (P < 0.05). Plasma cytokine concentrations were not significantly modulated by TNF inhibitors, with the exception of IL-6, which decreased after 12 weeks (P < 0.05). Cytokine profiles in RA SF vary with treatment and response to therapy. Cytokine concentrations are significantly lower in plasma than in SF and relatively unchanged by TNF inhibitor therapy. Concentrations of IL-6, IL-2 and G-CSF in SF may predict response to TNF inhibitors.

  13. Missing focus on Human Factors - organizational and cognitive ergonomics - in the safety management for the petroleum industry.

    Science.gov (United States)

    Johnsen, Stig O; Kilskar, Stine Skaufel; Fossum, Knut Robert

    2017-08-01

    More attention has recently been given to Human Factors in petroleum accident investigations. The Human Factors areas examined in this article are organizational, cognitive and physical ergonomics. A key question to be explored is as follows: To what degree are the petroleum industry and safety authorities in Norway focusing on these Human Factors areas from the design phase? To investigate this, we conducted an innovative exploratory study of the development of four control centres in Norwegian oil and gas industry in collaboration between users, management and Human Factors experts. We also performed a literature survey and discussion with the professional Human Factors network in Norway. We investigated the Human Factors focus, reasons for not considering Human Factors and consequences of missing Human Factors in safety management. The results revealed an immature focus and organization of Human Factors. Expertise on organizational ergonomics and cognitive ergonomics are missing from companies and safety authorities and are poorly prioritized during the development. The easy observable part of Human Factors (i.e. physical ergonomics) is often in focus. Poor focus on Human Factors in the design process creates demanding conditions for human operators and impact safety and resilience. There is lack of non-technical skills such as communication and decision-making. New technical equipment such as Closed Circuit Television is implemented without appropriate use of Human Factors standards. Human Factors expertise should be involved as early as possible in the responsible organizations. Verification and validation of Human Factors should be improved and performed from the start, by certified Human Factors experts in collaboration with the workforce. The authorities should check-back that the regulatory framework of Human Factors is communicated, understood and followed.

  14. Assessment of Factors Associated with the Safety Depth of GV15 Yamen

    Directory of Open Access Journals (Sweden)

    Park Soo-Jung

    2014-03-01

    Full Text Available Objectives: Yamen is the fifteenth acupoint of the Governor Vessel Meridian (GV15. It is anatomically close to the medulla oblongata, so finding the safety depth of the acupoint is very important. However, few studies on the safety depth of GV15 have been done. Methods: This study tried to measure the safety depth of GV15 by using magnetic resonance imaging (MRI scans and to analyze the factors affecting the safety depth through multiple regression analyses. This study was carried out for patients who had a brain MRI scan while visiting Jeonju Wonkwang Hospital, Korea. The shortest distance between the glabella and the occipital protuberance (DGO, the horizontal distance between the glabella and the back of the head (DGB and the dangerous depth (DD were measured from the sagittal views of the MRI images. The DD is the horizontal distance from the skin’s surface at GV15 to the spinal dura mater. Results: The model suggested that the safety depth (SD was significantly associated with gender (β = 0.474, P < 0.0001, DGO (β = 0.272, P = 0.027, and BMI (β = 0.249, P = 0.005 and the combination of three variables can explain the SD, with R2 = 0.571 (Table 3 A longer SD was associated with males and with greater BMI and DGO. Conclusion: This study suggests that gender, BMI and DGO may be important factors when the SD of GV15 is considered clinically through a multiple regression analysis of GV15.

  15. Time-resolved output spectrum from a hydrogen fluoride laser using mixtures of SF6 and HI

    International Nuclear Information System (INIS)

    Greiner, N.R.

    1975-01-01

    The time-resolved spectrum from a transverse-discharge hydrogen fluoride (HF) laser using a mixture of SF 6 and HI is reported. Because this spectrum matches that from a high-pressure H 2 -F 2 laser, and because the SF 6 -HI mixture is chemically stable, this laser should be a suitable and convenient source for probing H 2 -F 2 amplifiers

  16. Edge gradient and safety factor effects on electrostatic turbulent transport in tokamaks

    International Nuclear Information System (INIS)

    Tan, Ing Hwie.

    1992-05-01

    Electrostatic turbulence and transport measurements are performed on the Tokapole-II tokamak at the University of Wisconsin-Madison, as the safety-factor and the edge equilibrium gradients and varied substantially. Tokapole-II is a poloidal divertor tokamak capable of operating at a wide range of safety factors due to its unique magnetic limiter configuration. It also has retractable material limiters in a large scrape-off region, which permits the study of edge boundary conditions like density and temperature gradients. The turbulence is independent of safety factor, but strongly sensitive to the local density gradient, which itself depends upon the limiter configuration. When a material limiter is inserted in a high discharge, the density gradient is increased locally together with a local increase of the turbulence. On the other hand, limiter insertion in low discharges did not increase the density gradient as much and the turbulence properties are unchanged with respect to the magnetic limiter case. It is conducted then, that electrostatic turbulence is caused by the density gradient. Although the electrostatic fluctuation driven transport is enhanced in the large density gradient case, it is in all cases to small to explain the observed energy confinement times. To explore instabilities with small wavelengths, a 0.5 mm diameter shperical Langmuir probe was constructed, and its power compared with the power measured by larger cylindrical probes

  17. The Personality Inventory for DSM-5 Short Form (PID-5-SF): psychometric properties and association with big five traits and pathological beliefs in a Norwegian population.

    Science.gov (United States)

    Thimm, Jens C; Jordan, Stian; Bach, Bo

    2016-12-07

    With the publication of the fifth edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5), an alternative model for personality disorders based on personality dysfunction and pathological personality traits was introduced. The Personality Inventory for DSM-5 (PID-5) is a 220-item self-report inventory designed to assess the personality traits of this model. Recently, a short 100-item version of the PID-5 (PID-5-SF) has been developed. The aim of this study was to investigate the score reliability and structure of the Norwegian PID-5-SF. Further, criterion validity with the five factor model of personality (FFM) and pathological personality beliefs was examined. A derivation sample of university students (N = 503) completed the PID-5, the Big Five Inventory (BFI), and the Personality Beliefs Questionnaire - Short Form (PBQ-SF), whereas a replication sample of 127 students completed the PID-5-SF along with the aforementioned measures. The short PID-5 showed overall good score reliability and structural validity. The associations with FFM traits and pathological personality beliefs were conceptually coherent and similar for the two forms of the PID-5. The results suggest that the Norwegian PID-5 short form is a reliable and efficient measure of the trait criterion of the alternative model for personality disorders in DSM-5.

  18. Stability of normative data for the SF-36: results of a three-year prospective study in middle-aged Canadians.

    Science.gov (United States)

    Hopman, Wilma M; Berger, Claudie; Joseph, Lawrence; Towheed, Tanveer; vandenKerkhof, Elizabeth; Anastassiades, Tassos; Cranney, Ann; Adachi, Jonathan D; Loannidis, George; Poliquin, Suzette; Brown, Jacques P; Murray, Timothy M; Hanley, David A; Papadimitropoulos, Emmanuel A; Tenenhouse, Alan

    2004-01-01

    The SF-36 is widely used to assess health-related quality of life (HRQOL), but with few longitudinal studies in healthy populations, it is difficult to quantify its natural history. This is important because any measure of change following an intervention may be confounded by natural changes in HRQOL. This paper assesses mean changes in SF-36 scores over a 3-year period in men and women between the ages of 40 and 59 years at baseline. Subjects were randomly selected from nine Canadian cities. Mean SF-36 changes over a 3-year period (1996/1997-1999/2000) were calculated for each gender within 5-year age categories. Multiple imputation was used to correct for potential bias due to missing data. The baseline cohort included 1,974 women and 975 men between 40 and 59 years. Mean changes in HRQOL tended to be small. Women demonstrated small average declines in 22 of the 32 age and domain groupings (4 age groups, 8 SF-36 domains) while men showed declines in 14/32. Most participants stayed within 10 points of their original baseline score. Mean SF-36 scores change only slightly over three years in middle-aged Canadians, although there is much individual variation. It may be necessary to adjust for the natural evolution of SF-36 scores when interpreting results from longitudinal studies.

  19. Thai SF-36 health survey: tests of data quality, scaling assumptions, reliability and validity in healthy men and women

    Directory of Open Access Journals (Sweden)

    Sleigh Adrian

    2008-07-01

    Full Text Available Abstract Background Since its translation to Thai in 2000, the SF-36 Health Survey has been used extensively in many different clinical settings in Thailand. Its popularity has increased despite the absence of published evidence that the translated instrument satisfies scoring assumptions, the psychometric properties required for valid interpretation of the SF-36 summated ratings scales. The purpose of this paper was to examine these properties and to report on the reliability and validity of the Thai SF-36 in a non-clinical general population. Methods 1345 distance-education university students who live in all areas of Thailand completed a questionnaire comprising the Thai SF-36 (Version 1. Median age was 31 years. Psychometric tests recommended by the International Quality of Life Assessment Project were used. Results Data quality was satisfactory: questionnaire completion rate was high (97.5% and missing data rates were low ( Conclusion The summated ratings method can be used for scoring the Thai SF-36. The instrument was found to be reliable and valid for use in a general non-clinical population. Version 2 of the SF-36 could improve ceiling and floor effects in the role functioning scales. Further work is warranted to refine items that measure the concepts of social functioning, vitality and mental health to improve the reliability and discriminant validity of these scales.

  20. Defining an EPOR- regulated transcriptome for primary progenitors, including Tnfr-sf13c as a novel mediator of EPO- dependent erythroblast formation.

    Directory of Open Access Journals (Sweden)

    Seema Singh

    Full Text Available Certain concepts concerning EPO/EPOR action modes have been challenged by in vivo studies: Bcl-x levels are elevated in maturing erythroblasts, but not in their progenitors; truncated EPOR alleles that lack a major p85/PI3K recruitment site nonetheless promote polycythemia; and Erk1 disruption unexpectedly bolsters erythropoiesis. To discover novel EPO/EPOR action routes, global transcriptome analyses presently are applied to interrogate EPO/EPOR effects on primary bone marrow-derived CFUe-like progenitors. Overall, 160 EPO/EPOR target transcripts were significantly modulated 2-to 21.8-fold. A unique set of EPO-regulated survival factors included Lyl1, Gas5, Pim3, Pim1, Bim, Trib3 and Serpina 3g. EPO/EPOR-modulated cell cycle mediators included Cdc25a, Btg3, Cyclin-d2, p27-kip1, Cyclin-g2 and CyclinB1-IP-1. EPO regulation of signal transduction factors was also interestingly complex. For example, not only Socs3 plus Socs2 but also Spred2, Spred1 and Eaf1 were EPO-induced as negative-feedback components. Socs2, plus five additional targets, further proved to comprise new EPOR/Jak2/Stat5 response genes (which are important for erythropoiesis during anemia. Among receptors, an atypical TNF-receptor Tnfr-sf13c was up-modulated >5-fold by EPO. Functionally, Tnfr-sf13c ligation proved to both promote proerythroblast survival, and substantially enhance erythroblast formation. The EPOR therefore engages a sophisticated set of transcriptome response circuits, with Tnfr-sf13c deployed as one novel positive regulator of proerythroblast formation.

  1. Effects of SF6 plasma treatment on the properties of InGaZnO thin films

    Science.gov (United States)

    Choi, Jinsung; Bae, Byung Seong; Yun, Eui-Jung

    2018-03-01

    The effects of sulfur hexafluoride (SF6) plasma on the properties of amorphous InGaZnO (a-IGZO) thin films were examined. The properties of the a-IGZO thin films were characterized by Hall effect measurement, dynamic secondary ion mass spectroscopy (SIMS), and X-ray photoelectron spectroscopy (XPS). The IGZO thin films treated with SF6 plasma before annealing had a very high resistance mainly owing to the inclusion of S into the film surface, as evidenced by SIMS profiles. On the other hand, the samples treated with SF6 plasma after annealing showed better electrical properties with a Hall mobility of 10 cm2/(V·s) than the untreated samples or the samples SF6 plasma-treated before annealing. This was attributed to the increase in the number of oxygen vacancy defects in the a-IGZO thin films owing to the enhanced out-diffusion of O to the ambient and the increase in the number of F-related donor defects originating from the incorporation of a much larger amount of F than of S into the film surface, which were confirmed by XPS and SIMS.

  2. The impact of masculinity on safety oversights, safety priority and safety violations in two male-dominated occupations

    DEFF Research Database (Denmark)

    Nielsen, Kent; Hansen, Claus D.; Bloksgaard, Lotte

    2015-01-01

    Background Although men have a higher risk of occupational injuries than women the role of masculinity for organizational safety outcomes has only rarely been the object of research. Aim The current study investigated the association between masculinity and safety oversights, safety priority......-related context factors (safety leadership, commitment of the safety representative, and safety involvement) and three safety-related outcome factors (safety violations, safety oversights and safety priority) were administered twice 12 months apart to Danish ambulance workers (n = 1157) and slaughterhouse workers...

  3. Integrated approach to knowledge acquisition and safety management of complex plants with emphasis on human factors

    International Nuclear Information System (INIS)

    Kosmowski, K.T.

    1998-01-01

    In this paper an integrated approach to the knowledge acquisition and safety management of complex industrial plants is proposed and outlined. The plant is considered within a man-technology-environment (MTE) system. The knowledge acquisition is aimed at the consequent reliability evaluation of human factor and probabilistic modeling of the plant. Properly structured initial knowledge is updated in life-time of the plant. The data and knowledge concerning the topology of safety related systems and their functions are created in a graphical CAD system and are object oriented. Safety oriented monitoring of the plant includes abnormal situations due to external and internal disturbances, failures of hard/software components and failures of human factor. The operation and safety related evidence is accumulated in special data bases. Data/knowledge bases are designed in such a way to support effectively the reliability and safety management of the plant. (author)

  4. Separation factor dependence upon cathode material for tritium separation from heavy water by electrolysis

    International Nuclear Information System (INIS)

    Ogata, Y.; Sakuma, Y.; Ohtani, N.; Kotaka, M.

    2002-01-01

    Using three cathode materials, i.e. carbon (C), stainless steel (SUS), and nickel (Ni), tritium was separated from heavy water by electrolysis, and the separation factors were compared. To separate hydrogen isotopes, heavy water was electrolyzed by an electrolysis device with a solid polymer electrode (SPE), which needed no electrolyte additives for electrolysis. The anode was made of 3 mm thickness of a sintered porous titanium plate covered with iridium oxide. The cathode was made of the same thickness of a sintered porous carbon, stainless steel, or nickel plate. Heavy water or light water spiked with tritiated water was electrolyzed 20 A x 60 min with the electrolysis cell temperature at 10, 20 or 30degC, and 15 A x 80 min at 5degC. The produced hydrogen and oxygen gases were recombined using a palladium catalyst with nitrogen gas as a carrier. The activities of the water in the electrolysis cell and of the recombined water were analyzed using a liquid scintillation counter. The apparent D-T separation factor (SF D/T ) and H-T separation factor (SF H/T ) were calculated as quotient the specific activity of the water in the cell divided by that of the recombined water. The electrolysis potential to keep the current 20 A was 2-3 V. The average yields of the recombined water were 95%. At the cell temperature of 20degC, SF D/T (C), SF D/T (SUS), and SF D/T (Ni) were 2.42, 2.17, and 2.05, respectively. At the same temperature, SF H/T (C), SF H/T (SUS), and SF H/T (Ni) were 12.5, 10.8, and 11.8, respectively. The SFs were in agreement with the results in other works. The SFs were changed with the cell temperature. (author)

  5. Leader propagation in uniform background fields in SF6

    International Nuclear Information System (INIS)

    Seeger, M; Niemeyer, L; Bujotzek, M

    2009-01-01

    The breakdown mechanism of compressed SF 6 in gas insulation is known to be controlled by stepped leader propagation. This process is still not well understood in uniform and weakly non-uniform background fields with small electrode protrusions, such as particles or surface roughness. In a previous publication an investigation of partial discharges and breakdown in uniform background fields that focused on streamer and leader inception mechanisms was presented (Seeger et al 2008 J. Phys. D: Appl. Phys. 41 185204). In this paper we present for the first time a physical leader propagation model that consistently describes the observed phenomena in uniform background fields in SF 6 . The model explains two different types of leader breakdown; these can be associated with the precursor and the stem mechanisms. It also yields the parameters of stepped leader propagation, which include step lengths, associated step charges, step times and fields and temperatures in the leader channel. Further, it explains the features of arrested leaders in uniform background fields. The model predicts the range of parameters under which arrested and breakdown leaders occur in good agreement with the experimental data.

  6. Human factors engineering design review acceptance criteria for the safety parameter display

    International Nuclear Information System (INIS)

    McGevna, V.; Peterson, L.R.

    1981-01-01

    This report contains human factors engineering design review acceptance criteria developed by the Human Factors Engineering Branch (HFEB) of the Nuclear Regulatory Commission (NRC) to use in evaluating designs of the Safety Parameter Display System (SPDS). These criteria were developed in response to the functional design criteria for the SPDS defined in NUREG-0696, Functional Criteria for Emergency Response Facilities. The purpose of this report is to identify design review acceptance criteria for the SPDS installed in the control room of a nuclear power plant. Use of computer driven cathode ray tube (CRT) displays is anticipated. General acceptance criteria for displays of plant safety status information by the SPDS are developed. In addition, specific SPDS review criteria corresponding to the SPDS functional criteria specified in NUREG-0696 are established

  7. Human factors and fuzzy set theory for safety analysis

    International Nuclear Information System (INIS)

    Nishiwaki, Y.

    1987-01-01

    Human reliability and performance is affected by many factors: medical, physiological and psychological, etc. The uncertainty involved in human factors may not necessarily be probabilistic, but fuzzy. Therefore, it is important to develop a theory by which both the non-probabilistic uncertainties, or fuzziness, of human factors and the probabilistic properties of machines can be treated consistently. In reality, randomness and fuzziness are sometimes mixed. From the mathematical point of view, probabilistic measures may be considered a special case of fuzzy measures. Therefore, fuzzy set theory seems to be an effective tool for analysing man-machine systems. The concept 'failure possibility' based on fuzzy sets is suggested as an approach to safety analysis and fault diagnosis of a large complex system. Fuzzy measures and fuzzy integrals are introduced and their possible applications are also discussed. (author)

  8. Probabilistic safety assessment model in consideration of human factors based on object-oriented bayesian networks

    International Nuclear Information System (INIS)

    Zhou Zhongbao; Zhou Jinglun; Sun Quan

    2007-01-01

    Effect of Human factors on system safety is increasingly serious, which is often ignored in traditional probabilistic safety assessment methods however. A new probabilistic safety assessment model based on object-oriented Bayesian networks is proposed in this paper. Human factors are integrated into the existed event sequence diagrams. Then the classes of the object-oriented Bayesian networks are constructed which are converted to latent Bayesian networks for inference. Finally, the inference results are integrated into event sequence diagrams for probabilistic safety assessment. The new method is applied to the accident of loss of coolant in a nuclear power plant. the results show that the model is not only applicable to real-time situation assessment, but also applicable to situation assessment based certain amount of information. The modeling complexity is kept down and the new method is appropriate to large complex systems due to the thoughts of object-oriented. (authors)

  9. Safety, reliability, risk management and human factors: an integrated engineering approach applied to nuclear facilities

    International Nuclear Information System (INIS)

    Vasconcelos, Vanderley de; Silva, Eliane Magalhaes Pereira da; Costa, Antonio Carlos Lopes da; Reis, Sergio Carneiro dos

    2009-01-01

    Nuclear energy has an important engineering legacy to share with the conventional industry. Much of the development of the tools related to safety, reliability, risk management, and human factors are associated with nuclear plant processes, mainly because the public concern about nuclear power generation. Despite the close association between these subjects, there are some important different approaches. The reliability engineering approach uses several techniques to minimize the component failures that cause the failure of the complex systems. These techniques include, for instance, redundancy, diversity, standby sparing, safety factors, and reliability centered maintenance. On the other hand system safety is primarily concerned with hazard management, that is, the identification, evaluation and control of hazards. Rather than just look at failure rates or engineering strengths, system safety would examine the interactions among system components. The events that cause accidents may be complex combinations of component failures, faulty maintenance, design errors, human actions, or actuation of instrumentation and control. Then, system safety deals with a broader spectrum of risk management, including: ergonomics, legal requirements, quality control, public acceptance, political considerations, and many other non-technical influences. Taking care of these subjects individually can compromise the completeness of the analysis and the measures associated with both risk reduction, and safety and reliability increasing. Analyzing together the engineering systems and controls of a nuclear facility, their management systems and operational procedures, and the human factors engineering, many benefits can be realized. This paper proposes an integration of these issues based on the application of systems theory. (author)

  10. Safety, reliability, risk management and human factors: an integrated engineering approach applied to nuclear facilities

    Energy Technology Data Exchange (ETDEWEB)

    Vasconcelos, Vanderley de; Silva, Eliane Magalhaes Pereira da; Costa, Antonio Carlos Lopes da; Reis, Sergio Carneiro dos [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)], e-mail: vasconv@cdtn.br, e-mail: silvaem@cdtn.br, e-mail: aclc@cdtn.br, e-mail: reissc@cdtn.br

    2009-07-01

    Nuclear energy has an important engineering legacy to share with the conventional industry. Much of the development of the tools related to safety, reliability, risk management, and human factors are associated with nuclear plant processes, mainly because the public concern about nuclear power generation. Despite the close association between these subjects, there are some important different approaches. The reliability engineering approach uses several techniques to minimize the component failures that cause the failure of the complex systems. These techniques include, for instance, redundancy, diversity, standby sparing, safety factors, and reliability centered maintenance. On the other hand system safety is primarily concerned with hazard management, that is, the identification, evaluation and control of hazards. Rather than just look at failure rates or engineering strengths, system safety would examine the interactions among system components. The events that cause accidents may be complex combinations of component failures, faulty maintenance, design errors, human actions, or actuation of instrumentation and control. Then, system safety deals with a broader spectrum of risk management, including: ergonomics, legal requirements, quality control, public acceptance, political considerations, and many other non-technical influences. Taking care of these subjects individually can compromise the completeness of the analysis and the measures associated with both risk reduction, and safety and reliability increasing. Analyzing together the engineering systems and controls of a nuclear facility, their management systems and operational procedures, and the human factors engineering, many benefits can be realized. This paper proposes an integration of these issues based on the application of systems theory. (author)

  11. Understanding human and organisational factors - Nuclear safety and at-risk organisations

    International Nuclear Information System (INIS)

    Bernard, Benoit

    2014-01-01

    This book addresses human and organisational factors which are present at different moments of the lifetime of an at-risk installation (from design to dismantling). At-risk organisations are considered as firstly human systems, and the objective is then to highlight individual and collective mechanisms in these organisations. Several questions are addressed, notably the origins of at-risk behaviour, and the reasons of the repetition of errors by these organisations. A first chapter, while referring to examples, addresses the human dimension of safety: human and organisational factors as obstacles, normal accidents (Three Mile Island), accidents in high-reliability organisations (Chernobyl), identification of root causes (Tokai-mura), and social-technical approach to safety (Fukushima). By also referring to examples, the second chapter addresses how to analyse at-risk organisations: individual behaviours (case of naval and air transport accidents), team coordination (a fire, the Challenger accident), and organisational regulation (organisations forms and routines, explosion of BP Texas City, explosion of Columbia)

  12. Lyapunov-based distributed control of the safety-factor profile in a tokamak plasma

    International Nuclear Information System (INIS)

    Bribiesca Argomedo, Federico; Witrant, Emmanuel; Prieur, Christophe; Brémond, Sylvain; Nouailletas, Rémy; Artaud, Jean-François

    2013-01-01

    A real-time model-based controller is developed for the tracking of the distributed safety-factor profile in a tokamak plasma. Using relevant physical models and simplifying assumptions, theoretical stability and robustness guarantees were obtained using a Lyapunov function. This approach considers the couplings between the poloidal flux diffusion equation, the time-varying temperature profiles and an independent total plasma current control. The actuator chosen for the safety-factor profile tracking is the lower hybrid current drive, although the results presented can be easily extended to any non-inductive current source. The performance and robustness of the proposed control law is evaluated with a physics-oriented simulation code on Tore Supra experimental test cases. (paper)

  13. The Impact of Organizational Factors on Safety. The Perspective of Experts from the Spanish Nuclear Sector

    International Nuclear Information System (INIS)

    German, S.; Silla, I.; Navajas, J.

    2014-01-01

    Previous research supports the importance of organizational factors on safety in high reliability organizations. This study aims to determine the impact of those factors in the Spanish nuclear sector. Particularly, this study focuses on examining the role of performance indicators, organizational culture, organizational factors, and organizational context. With that purpose, an electronic survey addressed to experts from the Spanish nuclear sector was carried out. Results showed that performance indicators are well-known among industry experts and are perceived as useful for improving performance. Behavioural norms that influence safety and some relevant factors that promote problem identification were identified. Additionally, findings suggested that organizational context must be taken into account to better understand the role of organizational culture. Moreover, industry experts pointed out organizational factors to be improved: organizational communication processes within the organization, positive reinforcement, and field supervisors practices. Finally, findings supported the influence of organizational context on safety. It is noteworthy the role of the social impact of international events (e.g., Chernobyl...), the relationship with the regulator and the legislative and governmental framework. (Author)

  14. Fusion integral experiments and analysis and the determination of design safety factors - I: Methodology

    International Nuclear Information System (INIS)

    Youssef, M.Z.; Kumar, A.; Abdou, M.A.; Oyama, Y.; Maekawa, H.

    1995-01-01

    The role of the neutronics experimentation and analysis in fusion neutronics research and development programs is discussed. A new methodology was developed to arrive at estimates to design safety factors based on the experimental and analytical results from design-oriented integral experiments. In this methodology, and for a particular nuclear response, R, a normalized density function (NDF) is constructed from the prediction uncertainties, and their associated standard deviations, as found in the various integral experiments where that response, R, is measured. Important statistical parameters are derived from the NDF, such as the global mean prediction uncertainty, and the possible spread around it. The method of deriving safety factors from many possible NDFs based on various calculational and measuring methods (among other variants) is also described. Associated with each safety factor is a confidence level, designers may choose to have, that the calculated response, R, will not exceed (or will not fall below) the actual measured value. An illustrative example is given on how to construct the NDFs. The methodology is applied in two areas, namely the line-integrated tritium production rate and bulk shielding integral experiments. Conditions under which these factors could be derived and the validity of the method are discussed. 72 refs., 17 figs., 4 tabs

  15. Electrospun nanofibrous SF/P(LLA-CL membrane: a potential substratum for endothelial keratoplasty

    Directory of Open Access Journals (Sweden)

    Chen JZ

    2015-05-01

    Full Text Available Junzhao Chen,1,* Chenxi Yan,1,* Mengyu Zhu,1,* Qinke Yao,1 Chunyi Shao,1 Wenjuan Lu,1 Jing Wang,2 Xiumei Mo,2 Ping Gu,1 Yao Fu,1 Xianqun Fan1 1Department of Ophthalmology, Ninth People’s Hospital, Shanghai Jiao Tong University School of Medicine, 2Biomaterials and Tissue Engineering Laboratory, College of Chemistry and Chemical Engineering and Biotechnology, Donghua University, Shanghai, People’s Republic of China *These authors contributed equally to this work Background: Cornea transplant technology has progressed markedly in recent decades, allowing surgeons to replace diseased corneal endothelium by a thin lamellar structure. A thin, transparent, biocompatible, tissue-engineered substratum with corneal endothelial cells for endothelial keratoplasty is currently of interest. Electrospinning a nanofibrous structure can simulate the extracellular matrix and have beneficial effects for cell culture. Silk fibroin (SF has good biocompatibility but poor mechanical properties, while poly(L-lactic acid-co-Ɛ-caprolactone (P(LLA-CL has good mechanical properties but poor biocompatibility. Blending SF with P(LLA-CL can maintain the advantages of both these materials and overcome their disadvantages. Blended electrospun nanofibrous membranes may be suitable for regeneration of the corneal endothelium. The aim of this study was to produce a tissue-engineered construct suitable for endothelial keratoplasty.Methods: Five scaffolds containing different SF:P(LLA-CL blended ratios (100:0, 75:25, 50:50, 25:75, 0:100 were manufactured. A human corneal endothelial (B4G12 cell line was cultured on the membranes. Light transmission, speed of cell adherence, cell viability (live-dead test, cell proliferation (Ki-67, BrdU staining, and cell monolayer formation were detected on membranes with the different blended ratios, and expression of some functional genes was also detected by real-time polymerase chain reaction.Results: Different blended ratios of scaffolds

  16. The PSA of safety-critical digital I and C system: the determination of important factors and sensitivity analysis

    International Nuclear Information System (INIS)

    Kang, H. G.; Sung, T. Y.; Eom, H. S.; Jeong, H. S.; Park, J. K.; Lee, K. Y.; Park, J. K.

    2002-01-01

    This report is prepared to suggest a practical Probabilistic Safety Assessment (PSA) methodology of safety-critical digital instrumentation and control (I and C) systems. Even though conventional probabilistic safety assessment methods are immature for applying to microprocessor-based digital systems, practical needs force to apply it because the result of probabilistic safety assessment plays very important role in proving the safety of a designed system. Microprocessors and software technologies make the digital system very complex and hard to analyze the safety of their applications. The aim of this is: (1) To summarize the factors which should be represented by the model for probabilistic safety assessment and to propose a standpoint of evaluation for digital systems. (2) To quantitatively presents the results of a mathematical case study which examines the analysis framework of the safety of digital systems in the context of the PSA. (3) To show the results of a sensitivity study for some critical factors

  17. Mechanical strength and hydrophobicity of cotton fabric after SF6 plasma treatment

    Science.gov (United States)

    Kamlangkla, K.; Paosawatyanyong, B.; Pavarajarn, V.; Hodak, Jose H.; Hodak, Satreerat K.

    2010-08-01

    Surface treatments to tailor fabric properties are in high demand by the modern garment industry. We studied the effect of radio-frequency inductively coupled SF plasma on the surface characteristics of cotton fabric. The duration of the treatment and the SF pressure were varied systematically. We measured the hydrophobicity of treated cotton as a function of storage time and washing cycles. We used the weight loss (%) along with the etching rate, the tensile strength, the morphology changes and the hydrophobicity of the fabric as observables after treatments with different plasma conditions. The weight loss remains below 1% but it significantly increases when the treatment time is longer than 5 min. Substantial changes in the surface morphology of the fiber are concomitant with the increased etching rate and increased weight loss with measurable consequences in their mechanical characteristics. The measured water absorption time reaches the maximum of 210 min when the SF pressure is higher than 0.3 Torr. The water contact angle ( 149°) and the absorption time (210 min) of cotton treated with extreme conditions appear to be durable as long as the fabric is not washed. X-ray photoelectron spectroscopy analysis reveals that the water absorption time of the fabric follows the same increasing trend as the fluorine/carbon ratio at the fabric surface and atom density of fluorine measured by Ar actinometer.

  18. Mechanical strength and hydrophobicity of cotton fabric after SF6 plasma treatment

    International Nuclear Information System (INIS)

    Kamlangkla, K.; Paosawatyanyong, B.; Pavarajarn, V.; Hodak, Jose H.; Hodak, Satreerat K.

    2010-01-01

    Surface treatments to tailor fabric properties are in high demand by the modern garment industry. We studied the effect of radio-frequency inductively coupled SF 6 plasma on the surface characteristics of cotton fabric. The duration of the treatment and the SF 6 pressure were varied systematically. We measured the hydrophobicity of treated cotton as a function of storage time and washing cycles. We used the weight loss (%) along with the etching rate, the tensile strength, the morphology changes and the hydrophobicity of the fabric as observables after treatments with different plasma conditions. The weight loss remains below 1% but it significantly increases when the treatment time is longer than 5 min. Substantial changes in the surface morphology of the fiber are concomitant with the increased etching rate and increased weight loss with measurable consequences in their mechanical characteristics. The measured water absorption time reaches the maximum of 210 min when the SF 6 pressure is higher than 0.3 Torr. The water contact angle (149 deg.) and the absorption time (210 min) of cotton treated with extreme conditions appear to be durable as long as the fabric is not washed. X-ray photoelectron spectroscopy analysis reveals that the water absorption time of the fabric follows the same increasing trend as the fluorine/carbon ratio at the fabric surface and atom density of fluorine measured by Ar actinometer.

  19. Factors influencing workers to follow food safety management systems in meat plants in Ontario, Canada.

    Science.gov (United States)

    Ball, Brita; Wilcock, Anne; Aung, May

    2009-06-01

    Small and medium sized food businesses have been slow to adopt food safety management systems (FSMSs) such as good manufacturing practices and Hazard Analysis Critical Control Point (HACCP). This study identifies factors influencing workers in their implementation of food safety practices in small and medium meat processing establishments in Ontario, Canada. A qualitative approach was used to explore in-plant factors that influence the implementation of FSMSs. Thirteen in-depth interviews in five meat plants and two focus group interviews were conducted. These generated 219 pages of verbatim transcripts which were analysed using NVivo 7 software. Main themes identified in the data related to production systems, organisational characteristics and employee characteristics. A socio-psychological model based on the theory of planned behaviour is proposed to describe how these themes and underlying sub-themes relate to FSMS implementation. Addressing the various factors that influence production workers is expected to enhance FSMS implementation and increase food safety.

  20. Function and horizontal transfer of the small terminase subunit of the tailed bacteriophage Sf6 DNA packaging nanomotor

    Science.gov (United States)

    Leavitt, Justin C.; Gilcrease, Eddie B.; Wilson, Kassandra; Casjens, Sherwood R.

    2013-01-01

    Bacteriophage Sf6 DNA packaging series initiate at many locations across a 2 kbp region. Our in vivo studies that show that Sf6 small terminase subunit (TerS) protein recognizes a specific packaging (pac) site near the center of this region, that this site lies within the portion of the Sf6 gene that encodes the DNA-binding domain of TerS protein, that this domain of the TerS protein is responsible for the imprecision in Sf6 packaging initiation, and that the DNA-binding domain of TerS must be covalently attached to the domain that interacts with the rest of the packaging motor. The TerS DNA-binding domain is self-contained in that it apparently does not interact closely with the rest of the motor and it binds to a recognition site that lies within the DNA that encodes the domain. This arrangement has allowed the horizontal exchange of terS genes among phages to be very successful. PMID:23562538

  1. Rationalization of safety factors for breakwater design in hurricane-prone areas

    NARCIS (Netherlands)

    Tsimopoulou, V.; Kanning, W.; Verhagen, H.J.; Vrijling, J.K.

    2011-01-01

    This paper presents the development of a semi-probabilistic method for armour layer design of rubble mound breakwaters, which is based on the use of safety factors. The objective is to introduce an approach that is both attractive to designers and sufficiently reliable when a high degree of

  2. PSA methodology including new design, operational and safety factors, 'Level of recognition of phenomena with a presumed dominant influence upon operational safety' (failures of conventional as well as non-conventional passive components, dependent failures, influence of operator, fires and external threats, digital control, organizational factors)

    International Nuclear Information System (INIS)

    Jirsa, P.

    2001-10-01

    The document represents a specific type of discussion of existing methodologies for the creation and application of probabilistic safety assessment (PSA) in light of the EUR document summarizing requirements placed by Western European NPP operators on the future design of nuclear power plants. A partial goal of this discussion consists in mapping, from the PSA point of view, those selected design, operational and/or safety factors of future NPPs that may be entirely new or, at least, newly addressed. Therefore, the terms of reference for this stage were formulated as follows: Assess current level of knowledge and procedures in the analysis of factors and phenomena with a dominant influence upon operational safety of new generation reactors, especially in the following areas: (1) Phenomenology of failure types and mechanisms and reliability of conventional passive safety system components; (2) Phenomenology of failure types and mechanisms and reliability of non-conventional passive components of newly designed safety systems; (3) Phenomenology of types and mechanisms of dependent failures; (4) Human factor role in new generation reactors and its effect upon safety; (5) Fire safety and other external threats to new nuclear installations; (6) Reliability of the digital systems of the I and C system and their effect upon safety; and (7) Organizational factors in new nuclear installations. (P.A.)

  3. Thai SF-36 health survey: tests of data quality, scaling assumptions, reliability and validity in healthy men and women.

    Science.gov (United States)

    Lim, Lynette L-Y; Seubsman, Sam-Ang; Sleigh, Adrian

    2008-07-18

    Since its translation to Thai in 2000, the SF-36 Health Survey has been used extensively in many different clinical settings in Thailand. Its popularity has increased despite the absence of published evidence that the translated instrument satisfies scoring assumptions, the psychometric properties required for valid interpretation of the SF-36 summated ratings scales. The purpose of this paper was to examine these properties and to report on the reliability and validity of the Thai SF-36 in a non-clinical general population. 1345 distance-education university students who live in all areas of Thailand completed a questionnaire comprising the Thai SF-36 (Version 1). Median age was 31 years. Psychometric tests recommended by the International Quality of Life Assessment Project were used. Data quality was satisfactory: questionnaire completion rate was high (97.5%) and missing data rates were low (Vitality scale correlated better with the Mental Health scale than with itself, possibly because a healthy mental state is central to the concept of vitality in Thailand. The summated ratings method can be used for scoring the Thai SF-36. The instrument was found to be reliable and valid for use in a general non-clinical population. Version 2 of the SF-36 could improve ceiling and floor effects in the role functioning scales. Further work is warranted to refine items that measure the concepts of social functioning, vitality and mental health to improve the reliability and discriminant validity of these scales.

  4. Structure from Motion (SfM Photogrammetry with Drone Data: A Low Cost Method for Monitoring Greenhouse Gas Emissions from Forests in Developing Countries

    Directory of Open Access Journals (Sweden)

    Reason Mlambo

    2017-03-01

    Full Text Available Structure from Motion (SfM photogrammetry applied to photographs captured from Unmanned Aerial Vehicle (UAV platforms is increasingly being utilised for a wide range of applications including structural characterisation of forests. The aim of this study was to undertake a first evaluation of whether SfM from UAVs has potential as a low cost method for forest monitoring within developing countries in the context of Reducing Emissions from Deforestation and forest Degradation (REDD+. The project evaluated SfM horizontal and vertical accuracy for measuring the height of individual trees. Aerial image data were collected for two test sites; Meshaw (Devon, UK and Dryden (Scotland, UK using a Quest QPOD fixed wing UAV and DJI Phantom 2 quadcopter UAV, respectively. Comparisons were made between SfM and airborne LiDAR point clouds and surface models at the Meshaw site, while at Dryden, SfM tree heights were compared to ground measured tree heights. Results obtained showed a strong correlation between SfM and LiDAR digital surface models (R2 = 0.89 and canopy height models (R2 = 0.75. However, at Dryden, a poor correlation was observed between SfM tree heights and ground measured heights (R2 = 0.19. The poor results at Dryden were explained by the fact that the forest plot had a closed canopy structure such that SfM failed to generate enough below-canopy ground points. Finally, an evaluation of UAV surveying methods was also undertaken to determine their usefulness and cost-effectiveness for plot-level forest monitoring. The study concluded that although SfM from UAVs performs poorly in closed canopies, it can still provide a low cost solution in those developing countries where forests have sparse canopy cover (<50% with individual tree crowns and ground surfaces well-captured by SfM photogrammetry. Since more than half of the forest covered areas of the world have canopy cover <50%, we can conclude that SfM has enormous potential for forest mapping in

  5. National plan to enhance aviation safety through human factors improvements

    Science.gov (United States)

    Foushee, Clay

    1990-01-01

    The purpose of this section of the plan is to establish a development and implementation strategy plan for improving safety and efficiency in the Air Traffic Control (ATC) system. These improvements will be achieved through the proper applications of human factors considerations to the present and future systems. The program will have four basic goals: (1) prepare for the future system through proper hiring and training; (2) develop a controller work station team concept (managing human errors); (3) understand and address the human factors implications of negative system results; and (4) define the proper division of responsibilities and interactions between the human and the machine in ATC systems. This plan addresses six program elements which together address the overall purpose. The six program elements are: (1) determine principles of human-centered automation that will enhance aviation safety and the efficiency of the air traffic controller; (2) provide new and/or enhanced methods and techniques to measure, assess, and improve human performance in the ATC environment; (3) determine system needs and methods for information transfer between and within controller teams and between controller teams and the cockpit; (4) determine how new controller work station technology can optimally be applied and integrated to enhance safety and efficiency; (5) assess training needs and develop improved techniques and strategies for selection, training, and evaluation of controllers; and (6) develop standards, methods, and procedures for the certification and validation of human engineering in the design, testing, and implementation of any hardware or software system element which affects information flow to or from the human.

  6. Combination of classical test theory (CTT) and item response theory (IRT) analysis to study the psychometric properties of the French version of the Quality of Life Enjoyment and Satisfaction Questionnaire-Short Form (Q-LES-Q-SF).

    Science.gov (United States)

    Bourion-Bédès, Stéphanie; Schwan, Raymund; Epstein, Jonathan; Laprevote, Vincent; Bédès, Alex; Bonnet, Jean-Louis; Baumann, Cédric

    2015-02-01

    The study aimed to examine the construct validity and reliability of the Quality of Life Enjoyment and Satisfaction Questionnaire-Short Form (Q-LES-Q-SF) according to both classical test and item response theories. The psychometric properties of the French version of this instrument were investigated in a cross-sectional, multicenter study. A total of 124 outpatients with a substance dependence diagnosis participated in the study. Psychometric evaluation included descriptive analysis, internal consistency, test-retest reliability, and validity. The dimensionality of the instrument was explored using a combination of the classical test, confirmatory factor analysis (CFA), and an item response theory analysis, the Person Separation Index (PSI), in a complementary manner. The results of the Q-LES-Q-SF revealed that the questionnaire was easy to administer and the acceptability was good. The internal consistency and the test-retest reliability were 0.9 and 0.88, respectively. All items were significantly correlated with the total score and the SF-12 used in the study. The CFA with one factor model was good, and for the unidimensional construct, the PSI was found to be 0.902. The French version of the Q-LES-Q-SF yielded valid and reliable clinical assessments of the quality of life for future research and clinical practice involving French substance abusers. In response to recent questioning regarding the unidimensionality or bidimensionality of the instrument and according to the underlying theoretical unidimensional construct used for its development, this study suggests the Q-LES-Q-SF as a one-dimension questionnaire in French QoL studies.

  7. Human Factors Evaluation of Man-Machine Interface for Periodic Safety Review of Yonggwang Unit no. 1, 2

    International Nuclear Information System (INIS)

    Lee, Yong Hee; Lee, Jung Woon; Park, Jae Chang

    2006-01-01

    This report describes the research results of human factors assessment on the MMI(Man Machine Interface) equipment as part of Periodic Safety Review(PSR) of Yonggwang Unit no. 1, 2. As MMI is a key factor among human factors to be reviewed in PSR, we reviewed the MMI components of nuclear power plants in aspect of human factors engineering. The availability, suitability, and effectiveness of the MMI devices were chosen to be reviewed. The MMI devices were investigated through the review of design documents related to the MMI, survey of control panels, evaluation of experts, and experimental assessment. Checklists were used to perform this assessment and record the review results. The items mentioned by the expert comments to review in detail in relation with task procedures were tested by experiments with operators' participation. For some questionable issues arisen during this MMI review, operator workload and possibility of errors in operator actions were analysed. The reviewed MMI devices contain MCR(Main Control Room), SPDS(Safety Parameter Display System), RSP(Remote Shutdown Panel), and the selected LCBs(Local Control Boards) importantly related to safety. As results of the assessments, any significant problem challenging the safety was not found on human factors in the MMI devices. However, several small items to be changed and improved in suitability of MMI devices were discovered. An action plan is recommended to accommodate the suggestions and review comments. It will enhance the plant safety on MMI area

  8. Human Factors Evaluation of Man-Machine Interface for Periodic Safety Review of Yonggwang Unit no. 1, 2

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yong Hee; Lee, Jung Woon; Park, Jae Chang (and others)

    2006-01-15

    This report describes the research results of human factors assessment on the MMI(Man Machine Interface) equipment as part of Periodic Safety Review(PSR) of Yonggwang Unit no. 1, 2. As MMI is a key factor among human factors to be reviewed in PSR, we reviewed the MMI components of nuclear power plants in aspect of human factors engineering. The availability, suitability, and effectiveness of the MMI devices were chosen to be reviewed. The MMI devices were investigated through the review of design documents related to the MMI, survey of control panels, evaluation of experts, and experimental assessment. Checklists were used to perform this assessment and record the review results. The items mentioned by the expert comments to review in detail in relation with task procedures were tested by experiments with operators' participation. For some questionable issues arisen during this MMI review, operator workload and possibility of errors in operator actions were analysed. The reviewed MMI devices contain MCR(Main Control Room), SPDS(Safety Parameter Display System), RSP(Remote Shutdown Panel), and the selected LCBs(Local Control Boards) importantly related to safety. As results of the assessments, any significant problem challenging the safety was not found on human factors in the MMI devices. However, several small items to be changed and improved in suitability of MMI devices were discovered. An action plan is recommended to accommodate the suggestions and review comments. It will enhance the plant safety on MMI area.

  9. Molecular bonding in SF6 measured by elastic electron scattering

    International Nuclear Information System (INIS)

    Miller, J.D.; Fink, M.

    1992-01-01

    Elastic differential cross-section measurements of gaseous SF 6 were made with 30 keV electrons in the range of 0.25 bohrs -1 ≤s≤10 bohrs -1 . Structural parameters derived in this study closely matched those found in an earlier total (elastic plus inelastic) scattering investigation. Multiple-scattering effects were incorporated in the structural refinement. The discrepancies between the independent atom model and the measured differential cross section reproduce earlier total scattering results for momentum transfers of greater than 5 bohrs -1 . By extending the measurements to smaller s values, a closer examination of a Hartree--Fock calculation for SF 6 was possible. It was found that the difference curve obtained from the Hartree--Fock calculation matched the experimental data in this region. A more quantitative analysis was performed using the analytic expressions of Bonham and Fink to compute moments of the molecular charge distribution from the differential cross-section data. Comparison of these results with similar fits to the Hartree--Fock calculation confirmed the good agreement between the Hartree--Fock calculation and the current elastic data

  10. Steroidogenic factor 1 directs programs regulating diet-induced thermogenesis and leptin action in the ventral medial hypothalamic nucleus

    Science.gov (United States)

    The transcription factor steroidogenic factor 1 (SF-1) is exclusively expressed in the brain in the ventral medial hypothalamic nucleus (VMH) and is required for the development of this nucleus. However, the physiological importance of transcriptional programs regulated by SF-1 in the VMH is not wel...

  11. Characterization of nuclear materials by laser ablation ICP(SF)MS for nuclear forensic purposes

    International Nuclear Information System (INIS)

    Stefanka, Z.; Katona, R.; Varga, Z.

    2009-01-01

    Full text: The task of the categorization and characterization of nuclear materials of unknown origin has been delegated to the Institute of Isotopes of the Hungarian Academy of Sciences in 1996 by a governmental decree. Since the investigated materials are forensic evidences special attention was paid for minimizing the required sample amount. Therefore LA-ICP(SF)MS has been developed and also applied for the determination of isotopic composition, production date and the concentration of trace impurities. The LA-ICP(SF)MS methods were validated by inter-laboratory comparisons and were applied for analysis of uranium oxide pellets seized in Hungary. (author)

  12. Factors contributing to migraine headache surgery failure and success.

    Science.gov (United States)

    Larson, Kelsey; Lee, Michelle; Davis, Janine; Guyuron, Bahman

    2011-11-01

    The purpose of this study was to identify factors that contribute to migraine headache surgery failure and success. A retrospective chart review was conducted of patients who underwent surgery for migraine headaches performed by the senior author (B.G.) and had at least 11 months of follow-up. The study population included three groups: migraine surgery success, improvement, and failure. Thirty-six unique data points were collected for each patient. A total of 169 patients met inclusion criteria. Of these, 66 patients comprised the migraine surgery success group (S, complete elimination of migraine headaches); 67 comprised the migraine surgery improvement group (I, >50 percent reduction in migraine frequency, intensity, or duration); and 36 comprised the migraine surgery failure group (F, I, p=0.02), migraine frequency (SI, p=0.003; S>F, p=0.04), history of head or neck injury (SI, p=0.02), increased intraoperative bleeding (SF, p=0.0006; I>F, p=0.0004), site II (S>F, p=0.015), single operative site (SI, p=0.05; S>F, p=0.04). Factors associated with migraine surgery failure include increased intraoperative bleeding and surgery on fewer trigger sites. Factors associated with migraine surgery success are older age of migraine onset, higher rate of visual symptoms versus improvement group, surgery at site I or II, and deactivating all four operative sites. Risk, III.

  13. Comparison of AIMS2-SF, WOMAC, x-ray and a global physician assessment in order to approach quality of life in patients suffering from osteoarthritis

    Directory of Open Access Journals (Sweden)

    Szecsenyi Joachim

    2006-01-01

    Full Text Available Abstract Background Chronic diseases like osteoarthritis (OA substantially affect different dimensions of quality of life (QoL. The aim of the study was to reveal possible factors which mainly influence general practitioners (GPs assessment of patients' QoL. Methods 220 primary care patients with OA of the knee or the hip treated by their general practitioner for at least one year were included. All GPs were asked to assess patients' QoL based on the patients' history, actual examination and existing x-rays by means of a visual analog scale (VAS scale, resulting in values ranging from 0 to 10. Patients were asked to complete the McMaster Universities Osteoarthritis Index (WOMAC and the Arthritis Impact Measurement Scale2 Short Form (AIMS2-SF questionnaire. Results Significant correlations were revealed between "GP assessment" and the AIMS2-SF scales "physical" (rho = 0.495 and "symptom" (rho = 0.598 as well as to the "pain" scale of the WOMAC (rho = 0.557. A multivariate ordinal regression analysis revealed only the AIMS2-SF "symptom" scale (coefficient beta = 0.2588; p = 0.0267 and the x-ray grading according to Kellgren and Lawrence as significant influence variables (beta = 0.6395; p = 0.0004. Conclusion The results of the present study suggest that physicians' assessment of patients' QoL is mainly dominated by physical factors, namely pain and severity of x-ray findings. Our results suggest that socioeconomic and psychosocial factors, which are known to have substantial impact on QoL, are underestimated or missed. Moreover, the overestimation of x-ray findings, which are known to be less correlated to QoL, may cause over-treatment while important and promising targets to increase patients' QoL are missed.

  14. Defining safety culture and the nexus between safety goals and safety culture. 3. A Methodology for Identifying Deficiencies in Safety Culture

    International Nuclear Information System (INIS)

    Apostolakis, George; Weil, Rick

    2001-01-01

    At present, the drivers of performance problems at nuclear power plants (NPPs) are organizational in nature. Organizational deficiencies and other 'latent' conditions cause human errors, resulting in incidents that impact the performance of NPPs. Therefore, the human reliability community, regulators, and others concerned with NPP safety express the view that safety culture and organizational factors play an important role in plant safety. However, we have yet to identify one complete set of organizational factors, establish links between deficient safety culture and performance, or develop adequate tools to measure safety culture. This paper will contribute to the resolution of these issues. Safety culture is not a single factor but rather is a collection of several distinct factors. This paper asserts that in order to pro-actively manage safety culture at NPPs, leading indicators and appropriate measurements must be identified and developed. Central to this effort are the identification of the distinct factors comprising safety culture and the relationships between those factors and performance. We have identified several factors important to safety culture. We have developed a methodology that is a combination of traditional root-cause analysis and theories of human error, most notably Reason's theory of accident causation. In addition to this methodology's usefulness in identifying deficiencies in safety culture, it could also be used as a starting point to identify leading indicators of deteriorating safety performance. We have identified six organizational factors as being important: communication, formalization, goal prioritization, problem identification, roles and responsibilities, and technical knowledge. In addition, we have found that certain organizational factors, although pervasive throughout the organization, have a much greater influence on the successful outcome of particular tasks of work processes, rather than being equally important to all

  15. The consideration of the humane factor is essential in safety systems

    International Nuclear Information System (INIS)

    Parisot, F.

    2010-01-01

    In most risk analysis we consider that the staff fit perfectly the tasks to do in terms of training and competence but in fact a lot of factors intervene like the level of stress of the operator, the time available to identify the trouble or to take a decision, the relevance of the procedures, or the level of coordination and communication between the members of the staff. Different methods exist to assess the human factor, most have been designed to be used in the nuclear sector for instance: THERP (Technique for Human Error Rate Prediction) or OATS (Operation Action Tree) or SHARP (Systematic Human Action Reliability Procedure). These methods apply as early as the design stage of the engineered safety systems. Virtual reality has entered these methods because it allows operators to learn by making errors since errors in virtual reality have no consequences. Learning by making errors is an efficient method to get the operator used to accidental situations and as a consequence to reduce his level of stress. Some methods incorporate human elements into system safety analysis through the definition of performance shaping factors that describe the behaviour of operators in terms of physical and psychological abilities. (A.C.)

  16. SF Treg cells transcribing high levels of Bcl-2 and microRNA-21 demonstrate limited apoptosis in RA

    NARCIS (Netherlands)

    van der Geest, Kornelis S. M.; Smigielska, Katarzyna; Park, Ji-Ah; Abdulahad, Wayel H.; Kim, Hye-Won; Kroesen, Bart-Jan; van den Berg, Anke; Boots, Annemieke M. H.; Lee, Eun-Bong; Brouwer, Elisabeth

    Objective. The aim of this study was to investigate the turnover of Treg cells in the SF of RA patients. Methods. Treg cells were enumerated in peripheral blood and SF of RA patients and analysed by flow cytometry for expression of the proliferation marker Ki-67 and binding of the apoptosis marker

  17. Global distribution of mean age of stratospheric air from MIPAS SF6 measurements

    Directory of Open Access Journals (Sweden)

    H. Fischer

    2008-02-01

    Full Text Available Global distributions of profiles of sulphur hexafluoride (SF6 have been retrieved from limb emission spectra recorded by the Michelson Interferometer for Passive Atmospheric Sounding (MIPAS on Envisat covering the period September 2002 to March 2004. Individual SF6 profiles have a precision of 0.5 pptv below 25 km altitude and a vertical resolution of 4–6 km up to 35 km altitude. These data have been validated versus in situ observations obtained during balloon flights of a cryogenic whole-air sampler. For the tropical troposphere a trend of 0.230±0.008 pptv/yr has been derived from the MIPAS data, which is in excellent agreement with the trend from ground-based flask and in situ measurements from the National Oceanic and Atmospheric Administration Earth System Research Laboratory, Global Monitoring Division. For the data set currently available, based on at least three days of data per month, monthly 5° latitude mean values have a 1σ standard error of 1%. From the global SF6 distributions, global daily and monthly distributions of the apparent mean age of air are inferred by application of the tropical tropospheric trend derived from MIPAS data. The inferred mean ages are provided for the full globe up to 90° N/S, and have a 1σ standard error of 0.25 yr. They range between 0 (near the tropical tropopause and 7 years (except for situations of mesospheric intrusions and agree well with earlier observations. The seasonal variation of the mean age of stratospheric air indicates episodes of severe intrusion of mesospheric air during each Northern and Southern polar winter observed, long-lasting remnants of old, subsided polar winter air over the spring and summer poles, and a rather short period of mixing with midlatitude air and/or upward transport during fall in October/November (NH and April/May (SH, respectively, with small latitudinal gradients, immediately before the new polar vortex starts to form. The mean age distributions further

  18. Pharmacological Modulation of AMPAR Rescues Intellectual Disability-Like Phenotype in Tm4sf2−/y Mice

    KAUST Repository

    Murru, Luca

    2017-08-02

    Intellectual disability affects 2–3% of the world’s population and typically begins during childhood, causing impairments in social skills and cognitive abilities. Mutations in the TM4SF2 gene, which encodes the TSPAN7 protein, cause a severe form of intellectual disability, and currently, no therapy is able to ameliorate this cognitive impairment. We previously reported that, in cultured neurons, shRNA-mediated down-regulation of TSPAN7 affects AMPAR trafficking by enhancing PICK1–GluA2 interaction, thereby increasing the intracellular retention of AMPAR. Here, we found that loss of TSPAN7 function in mice causes alterations in hippocampal excitatory synapse structure and functionality as well as cognitive impairment. These changes occurred along with alterations in AMPAR expression levels. We also found that interfering with PICK1–GluA2 binding restored synaptic function in Tm4sf2−/y mice. Moreover, potentiation of AMPAR activity via the administration of the ampakine CX516 reverted the neurological phenotype observed in Tm4sf2−/y mice, suggesting that pharmacological modulation of AMPAR may represent a new approach for treating patients affected by TM4SF2 mutations and intellectual disability.

  19. Determining Health-Related Quality-of-Life Outcomes Using the SF-6D Following Total Hip Arthroplasty.

    Science.gov (United States)

    Elmallah, Randa K; Chughtai, Morad; Adib, Farshad; Bozic, Kevin J; Kurtz, Steven M; Mont, Michael A

    2017-03-15

    Following total hip arthroplasty, patients' perception of their postoperative improvement and health plays a large role in satisfaction with and success of the surgical procedure. The Short Form-6D (SF-6D) is a health-related quality-of-life measure that assigns numerical value to the perception of patients' own health. The purpose was to determine SF-6D values of patients after total hip arthroplasty, to determine whether score changes were clinically relevant, and to compare these with postoperative functional improvements. We evaluated 188 patients who underwent primary total hip arthroplasty at 7 institutions and who had a mean age of 69 years (range, 47 to 88 years) and a mean body mass index of 28.8 kg/m (range, 19.8 to 38.9 kg/m). The SF-6D values were obtained from patients' SF-36 scores, and clinical relevance of value changes was determined using effect size. Using previous research, effect sizes were considered small between 0.2 and 0.5, moderate between 0.6 to 0.8, and large at >0.8. Clinical correlation was assessed using the Lower-Extremity Activity Scale and Harris hip scores. Patients were assessed preoperatively and postoperatively at 6 months and 1, 2, 3, and 5 years. The SF-6D scores improved from preoperatively and achieved significance (p < 0.05) at all points. The effect size demonstrated good clinical relevance up to the latest follow-up: 1.27 at 6 months, 1.30 at 1 year, 1.07 at 2 years, 1.08 at 3 years, and 1.05 at 5 years. The Lower-Extremity Activity Scale improved at all follow-up points from preoperatively to 1.8 at 6 months, 2.0 at 1 year, 1.8 at 2 years, 1.5 at 3 years, and 1.6 points at 5 years. The Harris hip score improved to 38 points at 6 months, 40 points at 1 year, 38 points at 2 years, 39 points at 3 years, and 41 points at 5 years postoperatively. The improvements in the Lower-Extremity Activity Scale and the Harris hip score significantly positively correlated (p < 0.01) with the SF-6D scores at all time points. SF-6D scores

  20. Effects of a Workplace Intervention Targeting Psychosocial Risk Factors on Safety and Health Outcomes

    Science.gov (United States)

    Hammer, Leslie B.; Truxillo, Donald M.; Bodner, Todd; Rineer, Jennifer; Pytlovany, Amy C.; Richman, Amy

    2015-01-01

    The goal of this study was to test the effectiveness of a workplace intervention targeting work-life stress and safety-related psychosocial risk factors on health and safety outcomes. Data were collected over time using a randomized control trial design with 264 construction workers employed in an urban municipal department. The intervention involved family- and safety-supportive supervisor behavior training (computer-based), followed by two weeks of behavior tracking and a four-hour, facilitated team effectiveness session including supervisors and employees. A significant positive intervention effect was found for an objective measure of blood pressure at the 12-month follow-up. However, no significant intervention results were found for self-reported general health, safety participation, or safety compliance. These findings suggest that an intervention focused on supervisor support training and a team effectiveness process for planning and problem solving should be further refined and utilized in order to improve employee health with additional research on the beneficial effects on worker safety. PMID:26557703

  1. Effects of a Workplace Intervention Targeting Psychosocial Risk Factors on Safety and Health Outcomes

    Directory of Open Access Journals (Sweden)

    Leslie B. Hammer

    2015-01-01

    Full Text Available The goal of this study was to test the effectiveness of a workplace intervention targeting work-life stress and safety-related psychosocial risk factors on health and safety outcomes. Data were collected over time using a randomized control trial design with 264 construction workers employed in an urban municipal department. The intervention involved family- and safety-supportive supervisor behavior training (computer-based, followed by two weeks of behavior tracking and a four-hour, facilitated team effectiveness session including supervisors and employees. A significant positive intervention effect was found for an objective measure of blood pressure at the 12-month follow-up. However, no significant intervention results were found for self-reported general health, safety participation, or safety compliance. These findings suggest that an intervention focused on supervisor support training and a team effectiveness process for planning and problem solving should be further refined and utilized in order to improve employee health with additional research on the beneficial effects on worker safety.

  2. Operation, Safety and Human: Critical Factors for the Success of Railway Transportation

    NARCIS (Netherlands)

    Rajabali Nejad, Mohammadreza; Martinetti, Alberto; van Dongen, Leonardus Adriana Maria

    2016-01-01

    This paper focuses on three categories of performance indicators for railway transportation: the excellence of operation, system safety and human factors. These are among the most critical indicators for delivering high quality services. This paper discusses the main issues, challenges and future

  3. Translation, adaptation, validation and performance of the American Weight Efficacy Lifestyle Questionnaire Short Form (WEL-SF to a Norwegian version: a cross-sectional study

    Directory of Open Access Journals (Sweden)

    Tone N. Flølo

    2014-09-01

    Full Text Available Background. Researchers have emphasized a need to identify predictors that can explain the variability in weight management after bariatric surgery. Eating self-efficacy has demonstrated predictive impact on patients’ adherence to recommended eating habits following multidisciplinary treatment programs, but has to a limited extent been subject for research after bariatric surgery. Recently an American short form version (WEL-SF of the commonly used Weight Efficacy Lifestyle Questionnaire (WEL was available for research and clinical purposes.Objectives. We intended to translate and culturally adapt the WEL-SF to Norwegian conditions, and to evaluate the new versions’ psychometrical properties in a Norwegian population of morbidly obese patients eligible for bariatric surgery.Design. Cross-sectionalMethods. A total of 225 outpatients selected for Laparoscopic sleeve gastrectomy (LSG were recruited; 114 non-operated and 111 operated patients, respectively. The questionnaire was translated through forward and backward procedures. Structural properties were assessed performing principal component analysis (PCA, correlation and regression analysis were conducted to evaluate convergent validity and sensitivity, respectively. Data was assessed by mean, median, item response, missing values, floor- and ceiling effect, Cronbach’s alpha and alpha if item deleted.Results. The PCA resulted in one factor with eigenvalue > 1, explaining 63.0% of the variability. The WEL-SF sum scores were positively correlated with the Self-efficacy and quality of life instruments (p < 0.001. The WEL-SF was associated with body mass index (BMI (p < 0.001 and changes in BMI (p = 0.026. A very high item response was obtained with only one missing value (0.4%. The ceiling effect was in average 0.9 and 17.1% in the non-operated and operated sample, respectively. Strong internal consistency (r = 0.92 was obtained, and Cronbach’s alpha remained high (0.86–0.92 if single

  4. Risk factors for fishermen’s health and safety in Greece

    DEFF Research Database (Denmark)

    Frantzeskou, Elpida; Kastania, Anastasia N; Riza, Elena

    2013-01-01

    Aim: The aim of the study is to determine the risks for health and safety in Greek fisheries workers by exploring their health status and the health risk factors present in their occupational environment, thus providing a current baseline for further research in the future and for documentation....... The health risks factors studied include excessive weight, cardiovascular incidents and dermatological, musculoskeletal, respiratory, hearing, stress, and anxiety problems. The occupational health risk factors include alcohol, fatty food consumption, smoking, and lack of physical exercise. Conclusions......: The health effects observed are causally related to diet, smoking, and exercise, which in turn relate to the specific working conditions and culture in small-scale fishing that need to be taken into consideration in prevention programmes. The results are comparable withinternational fisheries experience...

  5. Emotional Responses to Suicidal Patients: Factor Structure, Construct, and Predictive Validity of the Therapist Response Questionnaire-Suicide Form

    Directory of Open Access Journals (Sweden)

    Shira Barzilay

    2018-04-01

    Full Text Available BackgroundMental health professionals have a pivotal role in suicide prevention. However, they also often have intense emotional responses, or countertransference, during encounters with suicidal patients. Previous studies of the Therapist Response Questionnaire-Suicide Form (TRQ-SF, a brief novel measure aimed at probing a distinct set of suicide-related emotional responses to patients found it to be predictive of near-term suicidal behavior among high suicide-risk inpatients. The purpose of this study was to validate the TRQ-SF in a general outpatient clinic setting.MethodsAdult psychiatric outpatients (N = 346 and their treating mental health professionals (N = 48 completed self-report assessments following their first clinic meeting. Clinician measures included the TRQ-SF, general emotional states and traits, therapeutic alliance, and assessment of patient suicide risk. Patient suicidal outcomes and symptom severity were assessed at intake and one-month follow-up. Following confirmatory factor analysis of the TRQ-SF, factor scores were examined for relationships with clinician and patient measures and suicidal outcomes.ResultsFactor analysis of the TRQ-SF confirmed three dimensions: (1 affiliation, (2 distress, and (3 hope. The three factors also loaded onto a single general factor of negative emotional response toward the patient that demonstrated good internal reliability. The TRQ-SF scores were associated with measures of clinician state anger and anxiety and therapeutic alliance, independently of clinician personality traits after controlling for the state- and patient-specific measures. The total score and three subscales were associated in both concurrent and predictive ways with patient suicidal outcomes, depression severity, and clinicians’ judgment of patient suicide risk, but not with global symptom severity, thus indicating specifically suicide-related responses.ConclusionThe TRQ-SF is a brief and reliable measure with a

  6. Emotional Responses to Suicidal Patients: Factor Structure, Construct, and Predictive Validity of the Therapist Response Questionnaire-Suicide Form.

    Science.gov (United States)

    Barzilay, Shira; Yaseen, Zimri S; Hawes, Mariah; Gorman, Bernard; Altman, Rachel; Foster, Adriana; Apter, Alan; Rosenfield, Paul; Galynker, Igor

    2018-01-01

    Mental health professionals have a pivotal role in suicide prevention. However, they also often have intense emotional responses, or countertransference, during encounters with suicidal patients. Previous studies of the Therapist Response Questionnaire-Suicide Form (TRQ-SF), a brief novel measure aimed at probing a distinct set of suicide-related emotional responses to patients found it to be predictive of near-term suicidal behavior among high suicide-risk inpatients. The purpose of this study was to validate the TRQ-SF in a general outpatient clinic setting. Adult psychiatric outpatients ( N  = 346) and their treating mental health professionals ( N  = 48) completed self-report assessments following their first clinic meeting. Clinician measures included the TRQ-SF, general emotional states and traits, therapeutic alliance, and assessment of patient suicide risk. Patient suicidal outcomes and symptom severity were assessed at intake and one-month follow-up. Following confirmatory factor analysis of the TRQ-SF, factor scores were examined for relationships with clinician and patient measures and suicidal outcomes. Factor analysis of the TRQ-SF confirmed three dimensions: (1) affiliation, (2) distress, and (3) hope. The three factors also loaded onto a single general factor of negative emotional response toward the patient that demonstrated good internal reliability. The TRQ-SF scores were associated with measures of clinician state anger and anxiety and therapeutic alliance, independently of clinician personality traits after controlling for the state- and patient-specific measures. The total score and three subscales were associated in both concurrent and predictive ways with patient suicidal outcomes, depression severity, and clinicians' judgment of patient suicide risk, but not with global symptom severity, thus indicating specifically suicide-related responses. The TRQ-SF is a brief and reliable measure with a 3-factor structure. It demonstrates

  7. BOREAS TGB-1 NSA SF6 Chamber Flux Data

    Science.gov (United States)

    Crill, Patrick; Varner, Ruth K.; Hall, Forrest G. (Editor); Conrad, Sara K. (Editor)

    2000-01-01

    The BOREAS TGB-1 team made several chamber and tower measurements of trace gases at sites in the BOREAS NSA. This data set contains sulfur hexafluoride (SF6) dark chamber flux measurements at the NSA-OJP and NSA-YJP sites from 16-May through 13-Sep-1994. Gas samples were extracted approximately every 7 days from dark chambers and analyzed at the NSA lab facility. The data are provided in tabular ASCII files.

  8. Abatement cost of SF6 emissions from medium voltage switchgear. Validation of recent studies for the European Commission

    Energy Technology Data Exchange (ETDEWEB)

    Benner, J.; Van Lieshout, M.; Croezen, H.

    2012-05-15

    Sulphur hexafluoride (SF6) is a gas with applications including use as an insulator and switching medium in medium voltage (MV) switchgear. While having certain unique properties, it is also a greenhouse gas, with a 22,800 times greater impact than CO2 and an atmospheric lifetime of over 3,000 years. Although the use of SF6 in MV switchgear can be avoided, according to recent studies for the European Commission, the abatement costs are high. This study validates the calculated cost levels as well as the general feasibility of determining a fixed cost figure for this purpose. This analysis yields a result which differs from the earlier studies, particularly with respect to the cost aspect, but also in other areas. CE Delft concludes that for the majority of applications cost-effective SF6-free options are available, leading to abatement costs for the use of SF6 in MV switchgear that range from - 40 to 0 euro/tCO2 eq., for all types of switchgear, with voltage levels below 25 kV and situated on relatively dry locations.

  9. Psychometric properties and structural validity of the short version of the personality beliefs questionnaire (PBQ-SF)

    OpenAIRE

    Manrique Hernández, Rubén Darío; Universidad San Buenaventura; Moratto Vasquez, Nadia Semenova; Universidad CES

    2015-01-01

    The Personality Belief Questionnaire- Short Form (PBQ-SF) is an assessment instrument of personality beliefs based on the cognitive theory that states that these are characterized by a specific pattern of dysfunctional thoughts. The objective of this study was to establish the psychometric properties and structural validity of the PBQ-SF questionnaire in Colombian adults from 18 to 35 years old. To carry out the above and with permission of the author the validation process was initiated foll...

  10. Measuring Disparities: Bias in the SF-36v2 among Spanish-speaking Medical Patients

    Science.gov (United States)

    Sudano, Joseph J.; Perzynski, Adam; Love, Thomas E.; Lewis, Steven A.; Murray, Patrick M.; Huber, Gail; Ruo, Bernice; Baker, David W.

    2011-01-01

    Background Many national surveys have found substantial differences in self-reported overall health (SROH) between Spanish-speaking Hispanics and other racial/ethnic groups. However, because cultural and language differences may create measurement bias, it is unclear whether observed differences in SROH reflect true differences in health. Objectives This study uses a cross-sectional survey to investigate psychometric properties of the SF-36v2 for subjects across four racial/ethnic and language groups. Multi-group latent variable modeling was used to test increasingly stringent criteria for measurement equivalence. Subjects Our sample (N = 1281) included 383 non-Hispanic whites, 368 non-Hispanic blacks, 206 Hispanics interviewed in English and 324 Hispanics interviewed in Spanish recruited from outpatient medical clinics in two large urban areas. Results We found weak factorial invariance across the four groups. However, there was no strong factorial invariance. The overall fit of the model was substantially worse (change in CFI > .02, RMSEA change > .003) after requiring equal intercepts across all groups. Further comparisons established that the equality constraints on the intercepts for Spanish-speaking Hispanics were responsible for the decrement to model fit. Conclusions Observed differences between SF-36v2 scores for Spanish speaking Hispanics are systematically biased relative to the other three groups. The lack of strong invariance suggests the need for caution when comparing SF-36v2 mean scores of Spanish-speaking Hispanics with those of other groups. However, measurement equivalence testing for this study supports correlational or multivariate latent variable analyses of SF-36v2 responses across all four subgroups, since these analyses require only weak factorial invariance. PMID:21430580

  11. Development and Examination of the Five-Factor Obsessive-Compulsive Inventory-Short Form.

    Science.gov (United States)

    Griffin, Sarah A; Suzuki, Takakuni; Lynam, Donald R; Crego, Cristina; Widiger, Thomas A; Miller, Joshua D; Samuel, Douglas B

    2018-01-01

    The Five-Factor Obsessive-Compulsive Inventory (FFOCI) is an assessment of obsessive-compulsive personality disorder (OCPD) that is based on the conceptual framework of the five-factor model (FFM) of personality. The FFOCI has 12 subscales that assess those five-factor model facets relevant to the description of OCPD. Research has suggested that the FFOCI scores relate robustly to existing measures of OCPD and relevant scales from general personality inventories. Nonetheless, the FFOCI's length-120 items-may limit its clinical utility. This study derived a 48-item FFOCI-Short Form (FFOCI-SF) from the original measure using item response theory methods. The FFOCI-SF scales successfully recreated the nomological network of the original measure and improved discriminant validity relative to the long form. These results support the use of the FFOCI-SF as a briefer measure of the lower-order traits associated with OCPD.

  12. A Methodology To Incorporate The Safety Culture Into Probabilistic Safety Assessments

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sunghyun; Kim, Namyeong; Jae, Moosung [Hanyang University, Seoul (Korea, Republic of)

    2015-10-15

    In order to incorporate organizational factors into PSA, a methodology needs to be developed. Using the AHP to weigh organizational factors as well as the SLIM to rate those factors, a methodology is introduced in this study. The safety issues related to nuclear safety culture have occurred increasingly. The quantification tool has to be developed in order to include the organizational factor into Probabilistic Safety Assessments. In this study, the state-of-the-art for the organizational evaluation methodologies has been surveyed. This study includes the research for organizational factors, maintenance process, maintenance process analysis models, a quantitative methodology using Analytic Hierarchy Process, Success Likelihood Index Methodology. The purpose of this study is to develop a methodology to incorporate the safety culture into PSA for obtaining more objective risk than before. The organizational factor considered in nuclear safety culture might affect the potential risk of human error and hardware-failure. The safety culture impact index to monitor the plant safety culture can be assessed by applying the developed methodology into a nuclear power plant.

  13. A Methodology To Incorporate The Safety Culture Into Probabilistic Safety Assessments

    International Nuclear Information System (INIS)

    Park, Sunghyun; Kim, Namyeong; Jae, Moosung

    2015-01-01

    In order to incorporate organizational factors into PSA, a methodology needs to be developed. Using the AHP to weigh organizational factors as well as the SLIM to rate those factors, a methodology is introduced in this study. The safety issues related to nuclear safety culture have occurred increasingly. The quantification tool has to be developed in order to include the organizational factor into Probabilistic Safety Assessments. In this study, the state-of-the-art for the organizational evaluation methodologies has been surveyed. This study includes the research for organizational factors, maintenance process, maintenance process analysis models, a quantitative methodology using Analytic Hierarchy Process, Success Likelihood Index Methodology. The purpose of this study is to develop a methodology to incorporate the safety culture into PSA for obtaining more objective risk than before. The organizational factor considered in nuclear safety culture might affect the potential risk of human error and hardware-failure. The safety culture impact index to monitor the plant safety culture can be assessed by applying the developed methodology into a nuclear power plant

  14. Diagnostic value of combined determination of serum AFP, CEA, CA199, SF levels in patients with primary hepatic carcinoma

    International Nuclear Information System (INIS)

    Wu Jiaming; Rui Zhilian

    2005-01-01

    Objective: To investigate the diagnostic value of combined detection of four tumor markers in patients with possible malignant change in liver disorders. Methods: Serum AFP, CEA, CA199 and SF levels were determined with chemiluminescence immunoassay (CLIA) in 49 patients with primary liver carcinoma, 7 patients with metastatic liver carcinoma, 40 patients with hepatic cirrhosis, 47 patients with HBV hepatitis and 30 controls. Results: The serum levels of AFP, CEA, SF in patients with primary hepatic cancer and serum levels of AFP, SF in patients with hepatic cirrhosis were all significantly higher than those in controls (P 0.05). Moreover, positive rate of combined determination of AFP, CEA, CA199, SF in patients with primary hepatic cancer was significantly higher than that in patients with metastatic liver cancer. Conclusion: With combined determination of these four tumor markers, the detection rate of primary hepatic carcinoma could be enhanced to above 95%. Also, differential diagnosis between primary and metastatic hepatic cancers could be facilitated. (authors)

  15. Detection on emamectin benzoate-induced apoptosis and DNA damage in Spodoptera frugiperda Sf-9 cell line.

    Science.gov (United States)

    Wu, Xiwei; Zhang, Lei; Yang, Chao; Zong, Mimi; Huang, Qingchun; Tao, Liming

    2016-01-01

    Emamectin benzoate (EMB), an important macrocyclic lactone insecticide that belongs to the avermectin family and possesses excellent potency in controlling pests, is non-carcinogenic and non-mutagenic conducted in rats and mice, but EMB-induced cytotoxicity and genotoxicity in arthropod insect have been seldom reported yet. In the present paper, we quantified the cytotoxicity of EMB through the detections on cell viability, DNA damage, and cell apoptosis in Spodoptera frugiperda Sf-9 cells in vitro. The results showed that EMB caused a concentration- and time-dependent reduction on the viability of Sf-9 cells, and the median inhibitory concentrations (IC50) were 3.34μM at 72h of exposure. The dual acridine orange/ethidium bromide staining showed that exposure to EMB induced a significant time- and concentration-dependent increase on cell apoptosis. The alkaline comet assay revealed that EMB induced significant increases on single-strand DNA breaks, and the percentage of γH2AX-positive cells represented a time- and concentration-dependent formation of DNA double-strand breaks in Sf-9 cells. Interestingly, the similar cytotoxic actions of EMB also went for the human cancerous HeLa cells as a control cell group. Data demonstrated the potential cytotoxic effect of EMB on Sf-9 cells that was significantly greater than the effect of hydrogen peroxide at the same concentrations. Copyright © 2015 Elsevier Inc. All rights reserved.

  16. The von Hippel-Lindau tumor suppressor gene inhibits hepatocyte growth factor/scatter factor-induced invasion and branching morphogenesis in renal carcinoma cells.

    Science.gov (United States)

    Koochekpour, S; Jeffers, M; Wang, P H; Gong, C; Taylor, G A; Roessler, L M; Stearman, R; Vasselli, J R; Stetler-Stevenson, W G; Kaelin, W G; Linehan, W M; Klausner, R D; Gnarra, J R; Vande Woude, G F

    1999-09-01

    Loss of function in the von Hippel-Lindau (VHL) tumor suppressor gene occurs in familial and most sporadic renal cell carcinomas (RCCs). VHL has been linked to the regulation of cell cycle cessation (G(0)) and to control of expression of various mRNAs such as for vascular endothelial growth factor. RCC cells express the Met receptor tyrosine kinase, and Met mediates invasion and branching morphogenesis in many cell types in response to hepatocyte growth factor/scatter factor (HGF/SF). We examined the HGF/SF responsiveness of RCC cells containing endogenous mutated (mut) forms of the VHL protein (VHL-negative RCC) with that of isogenic cells expressing exogenous wild-type (wt) VHL (VHL-positive RCC). We found that VHL-negative 786-0 and UOK-101 RCC cells were highly invasive through growth factor-reduced (GFR) Matrigel-coated filters and exhibited an extensive branching morphogenesis phenotype in response to HGF/SF in the three-dimensional (3D) GFR Matrigel cultures. In contrast, the phenotypes of A498 VHL-negative RCC cells were weaker, and isogenic RCC cells ectopically expressing wt VHL did not respond at all. We found that all VHL-negative RCC cells expressed reduced levels of tissue inhibitor of metalloproteinase 2 (TIMP-2) relative to the wt VHL-positive cells, implicating VHL in the regulation of this molecule. However, consistent with the more invasive phenotype of the 786-0 and UOK-101 VHL-negative RCC cells, the levels of TIMP-1 and TIMP-2 were reduced and levels of the matrix metalloproteinases 2 and 9 were elevated compared to the noninvasive VHL-positive RCC cells. Moreover, recombinant TIMPs completely blocked HGF/SF-mediated branching morphogenesis, while neutralizing antibodies to the TIMPs stimulated HGF/SF-mediated invasion in vitro. Thus, the loss of the VHL tumor suppressor gene is central to changes that control tissue invasiveness, and a more invasive phenotype requires additional genetic changes seen in some but not all RCC lines. These

  17. CuNi/Nb S-F hybrid heterostructures for investigation of induced magnetization in superconducting layer

    International Nuclear Information System (INIS)

    Khaydukov, Yu.; Kim, J.-H.; Logvenov, G.; Morari, R.; Babakova, E.; Sidorenko, A.

    2013-01-01

    The mutual influence of the magnetism and superconductivity in superconductor/ferromagnet (S/F) nano fabricated thin films hybrid heterostructures has been an exciting topic in solid-state physics during last decade. However, the interesting theoretical predictions still wait for unambiguous experimental verification. One of such effect is the so-called spin screening (often called inverse proximity effect), which designates a spin polarization in the superconducting layer close to the S/F interface. It is theoretically shown that a spin polarization develops in the S layer with direction opposite to the spin polarization of the conduction electrons in the F layer. If the thicknesses of the ferromagnetic and superconducting layers are small compared to the London penetration length, then the orbital effect, caused by Meissner screening currents of superconductor will be small compared to the spin effect due to spin polarization. The thickness of the spin polarized sub-layer is comparable to the coherence length ξ of the superconductor. Therefore an advanced technology should be used for fabrication of S/F nanostructures with thin superconducting layers. (authors)

  18. Verification of the sputter-generated {sup 32}SF{sub n}{sup −} (n = 1–6) anions by accelerator mass spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Mane, R.G.; Surendran, P. [Nuclear Physics Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Kumar, Sanjay [Physics Department, Agra College Agra, Agra 282002 (India); Nair, J.P.; Yadav, M.L. [Nuclear Physics Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Hemalatha, M. [UM-DAE Centre for Excellence in Basic Sciences, Mumbai 400098 (India); Thomas, R.G.; Mahata, K. [Nuclear Physics Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Kailas, S. [UM-DAE Centre for Excellence in Basic Sciences, Mumbai 400098 (India); Bhabha Atomic Research Centre, Trombay, Mumbai 400 085 (India); Gupta, A.K., E-mail: anit@tifr.res.in [Nuclear Physics Division, Bhabha Atomic Research Centre, Mumbai 400085 (India)

    2016-01-01

    Recently, we have performed systematic Secondary Ion Mass Spectrometry (SIMS) measurements at our ion source test set up and have demonstrated that gas phase {sup 32}SF{sub n}{sup −} (n = 1–6) anions for all size ‘n’ can be readily generated from a variety of surfaces undergoing Cs{sup +} ion sputtering in the presence of high purity SF{sub 6} gas by employing the gas spray-cesium sputter technique. In our SIMS measurements, the isotopic yield ratio {sup 34}SF{sub n}{sup −}/{sup 32}SF{sub n}{sup −} (n = 1–6) was found to be close to its natural abundance but not for all size ‘n’. In order to gain further insight into the constituents of these molecular anions, ultra sensitive Accelerator Mass Spectrometry (AMS) measurements were conducted with the most abundant {sup 32}SF{sub n}{sup −} (n = 1–6) anions, at BARC-TIFR 14 UD Pelletron accelerator. The results from these measurements are discussed in this paper.

  19. Patient safety: Safety culture and patient safety ethics

    DEFF Research Database (Denmark)

    Madsen, Marlene Dyrløv

    2006-01-01

    ,demonstrating significant, consistent and sometimes large differences in terms of safety culture factors across the units participating in the survey. Paper 5 is the results of a study of the relation between safety culture, occupational health andpatient safety using a safety culture questionnaire survey......Patient safety - the prevention of medical error and adverse events - and the initiative of developing safety cultures to assure patients from harm have become one of the central concerns in quality improvement in healthcare both nationally andinternationally. This subject raises numerous...... challenging issues of systemic, organisational, cultural and ethical relevance, which this dissertation seeks to address through the application of different disciplinary approaches. The main focus of researchis safety culture; through empirical and theoretical studies to comprehend the phenomenon, address...

  20. The reliability and validity of Chinese version of SF36 v2 in aging patients with chronic heart failure.

    Science.gov (United States)

    Dong, Aishu; Chen, Sisi; Zhu, Lianlian; Shi, Lingmin; Cai, Yueli; Zeng, Jingni; Guo, Wenjian

    2017-08-01

    Chronic heart failure (CHF), a major public health problem worldwide, seriously limits health-related quality of life (HRQOL). How to evaluate HRQOL in older patients with CHF remains a problem. To evaluate the reliability and validity of the Chinese version of the Medical Outcomes Study Short Form version 2 (SF-36v2) in CHF patients. From September 2012 to June 2014, we assessed QOL using the SF-36v2 in 171 aging participants with CHF in four cardiology departments. Convergent and discriminant validity, factorial validity, sensitivity among different NYHA classes and between different age groups, and reliability were determined using standard measurement methods. A total of 150 participants completed a structured questionnaire including general information and the Chinese SF-36v2; 132 questionnaires were considered valid, while 21 patients refused to take part. 25 of the 50 participants invited to complete the 2-week test-retest questionnaires returned completed questionnaires. The internal consistency reliability (Cronbach's α) of the total SF-36v2 was 0.92 (range 0.74-0.93). All hypothesized item-subscale correlations showed satisfactory convergent and discriminant validity. Sensitivity was measured in different NYHA classes and age groups. Comparison of different NYHA classes showed statistical significance, but there was no significant difference between age groups. We confirmed the SF-36v2 as a valid instrument for evaluating HRQOL Chinese CHF patients. Both reliability and validity were strongly satisfactory, but there was divergence in understanding subscales such as "social functioning" because of differing cultural background. The reliability, validity, and sensitivity of SF-36v2 in aging patients with CHF were acceptable.

  1. Defining the patient safety attitudes and influencing factors of health professionals working at maternity hospitals.

    Science.gov (United States)

    Tunçer Ünver, Gamze; Harmanci Seren, Arzu Kader

    2018-02-27

    To determine patient safety attitudes of midwives, nurses and physicians and to examine the difference or correlation in patient safety attitudes of midwives, nurses and physicians working in maternity hospitals. It has been suggested that it is necessary to define the factors affecting patient safety attitudes of health professionals working in maternity hospitals. A descriptive and correlational design was employed.The sample comprised 58 midwives, 134 nurses and 63 physicians (255) in two maternity hospitals in Istanbul, Turkey. The data were collected using an 'information form' and a 'Patient Safety Attitude Questionnaire'. The safety attitudes of participants were generally found to be negative. However, midwives had more positive patient safety attitudes and the age, unit, adequacy of patient safety training and the importance of patient safety were the most effective variables. As health professionals working in maternity hospitals generally have negative patient safety attitudes and because patient safety training provided better attitudes among the participants, these training programmes should be developed and implemented considering the differences among age groups and units. Health professionals have different views on the patient safety culture; therefore, training needs to involve everyone to create a shared vision for patient safety. © 2018 John Wiley & Sons Ltd.

  2. International OECD NEA Workshop: Implementation of the EGIRM methodology for presenting of national RW and SF management programmes - Workshop proceedings

    International Nuclear Information System (INIS)

    Froment, Ludovic; Volckaert, Geert; Garamszeghy, Mike; Lahodova, Zdena; Ilvonen, Mikko; Petry, Elodie; Matuzas, Vaidas; ); KUGEL, Karin; LaZaR, Istvan; Dionisi, Mario; Kinam, Kwon; De Nood, Michiel; Bennett, Peter; Vahr, Henning R.; Grzegrzolka, Andrzej; Madaj, Krzysztof; Virtopeanu, Cornelia Sabina; Samoylov, Andrey; Vedernikova, Marina; Garcia Neri, Emilio; Quiros Gracian, Maria; Gimholt, Eva; Hedberg, Bengt; Stein, Mario; Garrs, Gareth; James, Martin; Heath, Maurice; Lust, Merle; ); Zaccai, Henri; Ciambrella, Massimo; Kwong, Gloria; Lebedev, Vladimir; Smadja, Lisa; )

    2018-03-01

    The NEA, having developed the methodology with the purpose to harmonize the RW and SF inventories reporting within the presentation of the national RW/SF management strategies and disposal routes proposes wide discussion and practical application of the methodology. The methodology was presented by the EGIRM representatives to invited workshop participants. Four topical sessions were held: Session 1 - RW/SF inventory, management strategy and disposal routes - need to harmonise reporting and presenting. This session aimed at providing an understanding why the methodology development and other relevant activities were started and what is the status of international efforts. Reporting needs for the various international programmes and benefits of a common presentation format were discussed in the session. Session 2 - EGIRM methodology - history of development, background, EGIRM objectives, requirements to the methodology. This session aimed at providing an overview of the methodology development process, objectives achieved and requirements addressed. Session 3 - The methodology in details. This session focussed on all details of the developed methodology explaining the role of each element of the presenting scheme with wide provision of examples. Implementation of the methodology for reporting to different programmes were demonstrated. Session 4 - Practical exercises on the methodology application on prosed examples. This session focussed on practical exercises on the methodology application with examples of hypothetical and some national RW/SF inventories proposed by workshop organisers. This document gathers the available presentations given at this workshop: 1.1 - Review of existing programmes requiring/requesting national SF/RW inventory reporting; requirements to reports; supporting documents (NEA Secretariat, V. LEBEDEV); 1.2 - 'Status and Trends' initiative. Status of project and format of SF/RW inventory reporting (IAEA, M. LUST); 1.3 - Joint

  3. Application of classification algorithms for analysis of road safety risk factor dependencies.

    Science.gov (United States)

    Kwon, Oh Hoon; Rhee, Wonjong; Yoon, Yoonjin

    2015-02-01

    Transportation continues to be an integral part of modern life, and the importance of road traffic safety cannot be overstated. Consequently, recent road traffic safety studies have focused on analysis of risk factors that impact fatality and injury level (severity) of traffic accidents. While some of the risk factors, such as drug use and drinking, are widely known to affect severity, an accurate modeling of their influences is still an open research topic. Furthermore, there are innumerable risk factors that are waiting to be discovered or analyzed. A promising approach is to investigate historical traffic accident data that have been collected in the past decades. This study inspects traffic accident reports that have been accumulated by the California Highway Patrol (CHP) since 1973 for which each accident report contains around 100 data fields. Among them, we investigate 25 fields between 2004 and 2010 that are most relevant to car accidents. Using two classification methods, the Naive Bayes classifier and the decision tree classifier, the relative importance of the data fields, i.e., risk factors, is revealed with respect to the resulting severity level. Performances of the classifiers are compared to each other and a binary logistic regression model is used as the basis for the comparisons. Some of the high-ranking risk factors are found to be strongly dependent on each other, and their incremental gains on estimating or modeling severity level are evaluated quantitatively. The analysis shows that only a handful of the risk factors in the data dominate the severity level and that dependency among the top risk factors is an imperative trait to consider for an accurate analysis. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. A Novel Approach to Power Circuit Breaker Design for Replacement of SF6

    Directory of Open Access Journals (Sweden)

    D. J. Telfer

    2004-01-01

    Full Text Available This contribution explores the role of PTFE ablation in enhancing current interruption for various background gases in high voltage circuit breakers. An assessment of the current interruption capability has been made in terms of the arcing duration and the contact gap length at which critical arc extinction is achieved. These observations are supported by measurements of the magnitude of extinction and re-ignition voltage peaks. Most previous and other current experimental work on gas filled circuit breaker design follows conventional wisdom in investigating arcing behaviours at elevated gas pressures (usually up to 6 bar. But in this work we concentrate on the effects of using low gas pressures (less than 1 bar in the presence of a close-fitting shield of ablatant polymer material (PTFE that surrounds the electrode assembly of an experimental high power circuit breaker. We demonstrate that for several different gases, arc extinction capability compares well under these conditions with SF6, suggesting that SF6 could be replaced entirely in this novel system by more environmentally friendly gases. Moreover, the critical contact gap lengths at extinction are only slightly greater than when using SF6 at 6 bar. Weight loss measurements from the ablatant shield suggest that a chemical puffer action is the most likely mechanism for achieving the observed arc extinctions in this system.

  5. Mechanical strength and hydrophobicity of cotton fabric after SF{sub 6} plasma treatment

    Energy Technology Data Exchange (ETDEWEB)

    Kamlangkla, K. [Nanoscience and Nanotechnology Program, Center of Innovative Nanotechnology, Chulalongkorn University, Bangkok 10330 (Thailand); Paosawatyanyong, B. [Department of Physics, Faculty of Science, Chulalongkorn University, and ThEP Center, Commission on Higher Education, Bangkok 10330 (Thailand); Pavarajarn, V. [Department of Chemical Engineering, Faculty of Engineering, Chulalongkorn University, Bangkok 10330 (Thailand); Hodak, Jose H. [Department of Physics, Faculty of Science, Mahidol University, Bangkok 10400 (Thailand); Hodak, Satreerat K., E-mail: Satreerat.H@Chula.ac.th [Department of Physics, Faculty of Science, Chulalongkorn University, and ThEP Center, Commission on Higher Education, Bangkok 10330 (Thailand)

    2010-08-01

    Surface treatments to tailor fabric properties are in high demand by the modern garment industry. We studied the effect of radio-frequency inductively coupled SF{sub 6} plasma on the surface characteristics of cotton fabric. The duration of the treatment and the SF{sub 6} pressure were varied systematically. We measured the hydrophobicity of treated cotton as a function of storage time and washing cycles. We used the weight loss (%) along with the etching rate, the tensile strength, the morphology changes and the hydrophobicity of the fabric as observables after treatments with different plasma conditions. The weight loss remains below 1% but it significantly increases when the treatment time is longer than 5 min. Substantial changes in the surface morphology of the fiber are concomitant with the increased etching rate and increased weight loss with measurable consequences in their mechanical characteristics. The measured water absorption time reaches the maximum of 210 min when the SF{sub 6} pressure is higher than 0.3 Torr. The water contact angle (149 deg.) and the absorption time (210 min) of cotton treated with extreme conditions appear to be durable as long as the fabric is not washed. X-ray photoelectron spectroscopy analysis reveals that the water absorption time of the fabric follows the same increasing trend as the fluorine/carbon ratio at the fabric surface and atom density of fluorine measured by Ar actinometer.

  6. Brief Talk about Lithium-ion Batteries’ Safety and Influencing Factors

    Science.gov (United States)

    Jin, Cheng

    2017-12-01

    A brief introduction of the development background, the concept, characteristic and advantages of lithium-ion battery was given. The typical fire accidents about lithium-ion battery in production process, the vehicle with new energy, portable electronic products were summarized. Some important factors for lithium-ion batteries’ safety were emphatically analyzed. Several constructive suggestions on improvement direction were given, meanwhile, we have a nice exception on the future of lithium-ion battery industry.

  7. Partial safety factor calibration from stochastic finite element computation of welded joint with random geometries

    International Nuclear Information System (INIS)

    Schoefs, Franck; Chevreuil, Mathilde; Pasqualini, Olivier; Cazuguel, Mikaël

    2016-01-01

    Welded joints are used in various structures and infrastructures like bridges, ships and offshore structures, and are submitted to cyclic stresses. Their fatigue behaviour is an industrial key issue to deal with and still offers original research subjects. One of the available methods relies on the computing of the stress concentration factor. Even if some studies were previously driven to evaluate this factor onto some cases of welded structures, the shape of the weld joint is generally idealized through a deterministic parametric geometry. Previous experimental works however have shown that this shape plays a key role in the lifetime assessment. We propose in this paper a methodology for computing the stress concentration factor in presence of random geometries of welded joints. In view to make the results available by engineers, this method merges stochastic computation and semi-probabilistic analysis by computing partial safety factors with a dedicated method. - Highlights: • Numerical computation of stress concentration factor with random geometry of weld. • Real data are used for probabilistic modelling. • Identification of partial safety factor from SFEM computation in case of random geometries.

  8. FATIGUE AS A HAZARDOUS FACTOR FOR FLIGHT SAFETY

    Directory of Open Access Journals (Sweden)

    M. Lushkin Alexander

    2017-01-01

    Full Text Available The main priority of any air company activity and the main condition for its development is the achievement of the highest flight safety level. Significant positive results in this area have been recently achieved, hence, the relative stagna- tion of indexes, reflecting the flight safety as a condition of air transport system, has been revealed. It has become evident that the present accident prevention philosophy seems to be exhausted, and at the current stage of development it doesn’t allow to make a breakthrough in the solution of all the problems, which air companies face in this respect. In the perspec- tive to find new ways to solve the existing tasks, in 2011, International Civil Aviation Organization Council adopted fatigue risk management international standards as an alternative for the traditional approach to managing crewmember fatigue by prescribing limits on maximum daily, monthly and yearly flight and duty hours. It’s a well-known fact that state of fatigue has a special place among the functional states, which are professionally significant for airmen work and which are the key link in “man-aircraft-environment” system.In this article, fatigue is considered to be a risk factor that contributes to the formation and development of crew violations and errors in the process of piloting the aircraft. We have analyzed the characteristics and reasons leading to in- flight fatigue and estimated its influence on crew performance, considering the interrelation between them. The article specifies the methods and techniques to measure pilots fatigue; besides it has been substantiated the necessity of fatigue risk management system development in airlines to effectively ensure the flight safety.

  9. Safety climate and attitude as evaluation measures of organizational safety.

    Science.gov (United States)

    Isla Díaz, R; Díaz Cabrera, D

    1997-09-01

    The main aim of this research is to develop a set of evaluation measures for safety attitudes and safety climate. Specifically it is intended: (a) to test the instruments; (b) to identify the essential dimensions of the safety climate in the airport ground handling companies; (c) to assess the quality of the differences in the safety climate for each company and its relation to the accident rate; (d) to analyse the relationship between attitudes and safety climate; and (e) to evaluate the influences of situational and personal factors on both safety climate and attitude. The study sample consisted of 166 subjects from three airport companies. Specifically, this research was centered on ground handling departments. The factor analysis of the safety climate instrument resulted in six factors which explained 69.8% of the total variance. We found significant differences in safety attitudes and climate in relation to type of enterprise.

  10. Predicting safety culture: the roles of employer, operations manager and safety professional.

    Science.gov (United States)

    Wu, Tsung-Chih; Lin, Chia-Hung; Shiau, Sen-Yu

    2010-10-01

    This study explores predictive factors in safety culture. In 2008, a sample 939 employees was drawn from 22 departments of a telecoms firm in five regions in central Taiwan. The sample completed a questionnaire containing four scales: the employer safety leadership scale, the operations manager safety leadership scale, the safety professional safety leadership scale, and the safety culture scale. The sample was then randomly split into two subsamples. One subsample was used for measures development, one for the empirical study. A stepwise regression analysis found four factors with a significant impact on safety culture (R²=0.337): safety informing by operations managers; safety caring by employers; and safety coordination and safety regulation by safety professionals. Safety informing by operations managers (ß=0.213) was by far the most significant predictive factor. The findings of this study provide a framework for promoting a positive safety culture at the group level. Crown Copyright © 2010. Published by Elsevier Ltd. All rights reserved.

  11. 48 CFR 53.222 - Application of labor laws to Government acquisitions (SF's 308, 1093, 1413, 1444, 1445, 1446, WH...

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Application of labor laws... Prescription of Forms 53.222 Application of labor laws to Government acquisitions (SF's 308, 1093, 1413, 1444... application of labor laws: (a) [Reserved] (b) [Reserved] (c) SF 308 (DOL) (Rev. 5/85), Request for Wage...

  12. Analysis of contributing factors associated to related patients safety incidents in Intensive Care Medicine.

    Science.gov (United States)

    Martín Delgado, M C; Merino de Cos, P; Sirgo Rodríguez, G; Álvarez Rodríguez, J; Gutiérrez Cía, I; Obón Azuara, B; Alonso Ovies, Á

    2015-01-01

    To explore contributing factors (CF) associated to related critical patients safety incidents. SYREC study pos hoc analysis. A total of 79 Intensive Care Departments were involved. The study sample consisted of 1.017 patients; 591 were affected by one or more incidents. The CF were categorized according to a proposed model by the National Patient Safety Agency from United Kingdom that was modified. Type, class and severity of the incidents was analyzed. A total 2,965 CF were reported (1,729 were associated to near miss and 1,236 to adverse events). The CF group more frequently reported were related patients factors. Individual factors were reported more frequently in near miss and task related CF in adverse events. CF were reported in all classes of incidents. The majority of CF were reported in the incidents classified such as less serious, even thought CF patients factors were associated to serious incidents. Individual factors were considered like avoidable and patients factors as unavoidable. The CF group more frequently reported were patient factors and was associated to more severe and unavoidable incidents. By contrast, individual factors were associated to less severe and avoidable incidents. In general, CF most frequently reported were associated to near miss. Copyright © 2014 Elsevier España, S.L.U. and SEMICYUC. All rights reserved.

  13. Construction Safety And Health Factors At The Industry Level: The Case Of Singapore

    Directory of Open Access Journals (Sweden)

    Charles Y.J. Cheah

    2007-12-01

    Full Text Available The construction industry is one of the most hazardous industries due to the unique nature of its products and the processes involved. Recent occurrences of highly publicized construction site accidents in Singapore have highlighted the immediate needs for the local industry to address safety and attention at the industry level. The objective of this paper is to examine issues and critical factors affecting S&H standards in Singapore. Clearly, collective efforts should be pursued at the industry level as the country moves towards the ultimate safety management strategy of self-regulation. The findings also indicate that the challenge of making worksites safe should not be placed solely on the contractors but should be shared by all parties affecting the value chain of construction, including the developers, the consultants and the government. The factors identified through factor analysis may inform legislators and industry practitioners in terms of the sources of problems and help develop effective strategies for improvement. Some of the experiences mentioned in the paper could also be relevant to other countries facing similar circumstances.

  14. Inactivation of Tm6sf2, a Gene Defective in Fatty Liver Disease, Impairs Lipidation but Not Secretion of Very Low Density Lipoproteins.

    Science.gov (United States)

    Smagris, Eriks; Gilyard, Shenise; BasuRay, Soumik; Cohen, Jonathan C; Hobbs, Helen H

    2016-05-13

    A missense mutation (E167K) in TM6SF2 (transmembrane 6 superfamily member 2), a polytopic protein of unknown function, is associated with the full spectrum of fatty liver disease. To investigate the role of TM6SF2 in hepatic triglyceride (TG) metabolism, we inactivated the gene in mice. Chronic inactivation of Tm6sf2 in mice is associated with hepatic steatosis, hypocholesterolemia, and transaminitis, thus recapitulating the phenotype observed in humans. No dietary challenge was required to elicit the phenotype. Immunocytochemical and cell fractionation studies revealed that TM6SF2 was present in the endoplasmic reticulum and Golgi complex, whereas the excess neutral lipids in the Tm6sf2(-/-) mice were located in lipid droplets. Plasma VLDL-TG levels were reduced in the KO animals due to a 3-fold decrease in VLDL-TG secretion rate without any associated reduction in hepatic apoB secretion. Both VLDL particle size and plasma cholesterol levels were significantly reduced in KO mice. Despite levels of TM6SF2 protein being 10-fold higher in the small intestine than in the liver, dietary lipid absorption was only modestly reduced in the KO mice. Our data, taken together, reveal that TM6SF2 is required to mobilize neutral lipids for VLDL assembly but is not required for secretion of apoB-containing lipoproteins. Despite TM6SF2 being located in the endoplasmic reticulum and Golgi complex, the lipids that accumulate in its absence reside in lipid droplets. © 2016 by The American Society for Biochemistry and Molecular Biology, Inc.

  15. Insight and Lessons Learned on Organizational Factors and Safety Culture from the Review of Human Error-related Events of NPPs in Korea

    International Nuclear Information System (INIS)

    Kim, Ji Tae; Lee, Dhong Hoon; Choi, Young Sung

    2014-01-01

    Event investigation is one of the key means of enhancing nuclear safety deriving effective measures and preventing recurrences. However, it is difficult to analyze organizational factors and safety culture. This paper tries to review human error-related events from perspectives of organizational factors and safety culture, and to derive insights and lessons learned in developing the regulatory infrastructure of plant oversight on safety culture

  16. Insight and Lessons Learned on Organizational Factors and Safety Culture from the Review of Human Error-related Events of NPPs in Korea

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ji Tae; Lee, Dhong Hoon; Choi, Young Sung [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2014-08-15

    Event investigation is one of the key means of enhancing nuclear safety deriving effective measures and preventing recurrences. However, it is difficult to analyze organizational factors and safety culture. This paper tries to review human error-related events from perspectives of organizational factors and safety culture, and to derive insights and lessons learned in developing the regulatory infrastructure of plant oversight on safety culture.

  17. Elimination of particle effects in SF/sub 6/ insulated transmission systems. First quarterly report

    Energy Technology Data Exchange (ETDEWEB)

    Dale, S.J.

    1979-01-01

    The purpose of this program is to develop methods and equipment to eliminate the adverse effect of particle contamination in SF/sub 6/-insulated transmission (CGIT) systems, so that the excellent dielectric properties of SF/sub 6/ can be fully exploited. Presently, CGIT systems are operated at about 10% of the dielectric strength capability of the SF/sub 6/ gas. The program includes theoretical and experimental evaluation of concepts, optimization and verification studies in CGIT systems, and reliability analysis, documentation of designs and economic analysis. Progress is now being made on evaluating alternative conductor and sheath designs to minimize the effect of particles. Materials for solid insulation is being investigated for the same purpose; the effort is presently concentrated on obtaining reliable quantitative measurement techniques of electrostatic properties. Computer calculation of particle trap configurations are being made to determine the optimum trap configurations. A novel particle trapping technique is being using adhesive materials. Manufacture and field control technique studies has commenced with a study of mechanical vibration techniques. An experimental test chamber consisting of a 9 m (30 foot) long 145 kV bus has been designed. This system will be used in testing of particle control concepts and in migration and optimization studies.

  18. Particle contamination in gas-insulated systems: new control methods and optimum SF6/N2 mixtures

    International Nuclear Information System (INIS)

    Pace, M.O.; Adcock, J.L.; Christophorou, L.G.

    1984-01-01

    The feasibilities of two new separate techniques to control particle contamination in practical gas-insulated sytems were tested in a small-scale concentric cylinder geometry. In one technique an insulating coating was first formed on the particles in a contaminated system by low-pressure discharges in appropriate gases such as 1-C 3 F 6 and c-C 4 F 8 . When SF 6 was subsequently introduced into the same system at practical pressure as the operating insulation, the considerable harm ordinarily caused by particles was found to be eliminated. The nature of the coating formed also on the electrodes in this process was studied, with the conclusion that the observed benefits were primarily due to coating on particles, not on electrodes. In the second technique the particles, moved randomly by electrical stress, struck and adhered to the surface of a tacky insulating solid material; they were subsequently encapsulated in a melt-resolidify cycle without electrical stress. This trapping technique was also found to eliminate the harmful effects of particles in SF 6 at practical pressure. A technique for producing a trapping material with temperature characteristics appropriate for practical apparatus was devised. The effect of particle contamination on the dielectric strength of SF 6 /N 2 mixtures was studied as a function of total pressure and percentage of each gas. Optimum total pressure (approx. 6 atm) and optimum percentages (60% SF 6 /40% N 2 ) were observed in breakdown tests in particle-contaminated concentric cylinder geometry

  19. Hong Kong men with low incomes have worse health-related quality of life as judged by SF-36 scores.

    Science.gov (United States)

    Ko, G T C; Wai, H P S; Tsang, P C C; Chan, H C K

    2006-10-01

    To analyse the association between income and health-related quality of life using the Medical Outcome Study Short Form 36 (SF-36) Chinese version in Hong Kong Chinese working population. Cross-sectional observation study. A commercial company in Hong Kong. All clerical and administrative staff of a commercial company was invited to participate; 876 of the 1003 staff agreed. The subjects were categorised into three income groups according to monthly income in Hong Kong dollars (low, 10,000-25,000; high, >25,000). The mean age of the 288 men and 588 women was 34.9 (standard deviation, 7.9; median, 34.0; range, 18-71) years. SF-36 scores on health-related quality of life. The distribution of income was 30% in high-, 54.8% in middle-, and 15.2% in low-income groups. Women had similar SF-36 scores among different income groups. In men, for most variables there was a significant positive linear correlation between income and SF-36 scores. Low income is associated with a worse health-related quality of life in Hong Kong Chinese men.

  20. Abortive replication of Bombyx mori nucleopolyhedrovirus in Sf9 and High Five cells: Defective nuclear transport of the virions

    International Nuclear Information System (INIS)

    Katou, Yasuhiro; Ikeda, Motoko; Kobayashi, Michihiro

    2006-01-01

    Despite close genetic relationship, Bombyx mori nucleopolyhedrovirus (BmNPV) and Autographa californica multicapsid NPV (AcMNPV) display a distinct host range property. Here, BmNPV replication was examined in Sf9 and High Five cells that were nonproductive for BmNPV infection but supported high titers of AcMNPV replication. Recombinant BmNPV, vBm/gfp/lac, containing bm-ie1 promoter-driven egfp showed that few Sf9 and High Five cells infected with vBm/gfp/lac expressed EGFP, while large proportion of EGFP-expressing cells was observed when transfected with vBm/gfp/lac DNA. Immunocytochemical analysis showed that BmNPV was not imported into the nucleus of these two cell lines, while recombinant BmNPV, vBmΔ64/ac-gp64 possessing AcMNPV gp64 was imported into the nucleus, yielding progeny virions in High Five cells, but not Sf9 cells. These results indicate that the defective nuclear import of infected virions due to insufficient BmNPV GP64 function is involved in the restricted BmNPV replication in Sf9 and High Five cells