Safety factors for neutron fluences in NPP safety assessment

International Nuclear Information System (INIS)

Demekhin, V.L.; Bukanov, V.N.; Il'kovich, V.V.; Pugach, A.M.

2016-01-01

In accordance with global practice and a number of existing regulations, the use of conservative approach is required for the calculations related to nuclear safety assessment of NPP. It implies the need to consider the determination of neutron fluence errors that is rather complicated. It is proposed to carry out the consideration by the way of multiplying the neutron fluences obtained with transport calculations by safety factors. The safety factor values are calculated by the developed technique based on the theory of errors, features of the neutron transport calculation code and the results obtained with the code. It is shown that the safety factor value is equal 1.18 with the confidence level of not less than 0.95 for the majority of VVER-1000 reactor places where neutron fluences are determined by MCPV code, and its maximum value is 1.25

Biological and haematological safety profile of oral amodiaquine ...

African Journals Online (AJOL)

Biological and haematological safety profile of oral amodiaquine and chloroquine in healthy volunteers with or without Plasmodium falciparum infection in northeast Tanzania. JJ Massaga, JP Lusingu, R Makunde, HM Malebo, MM Chile, JA Akida, MM Lemnge, AM Rønn, TG Theander, IC Bygbjerg, AY Kitua ...

14 CFR 29.303 - Factor of safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Factor of safety. 29.303 Section 29.303... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Strength Requirements General § 29.303 Factor of safety. Unless otherwise provided, a factor of safety of 1.5 must be used. This factor applies to external and inertia...

14 CFR 27.303 - Factor of safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Factor of safety. 27.303 Section 27.303... STANDARDS: NORMAL CATEGORY ROTORCRAFT Strength Requirements General § 27.303 Factor of safety. Unless otherwise provided, a factor of safety of 1.5 must be used. This factor applies to external and inertia...

Safety and Tolerability Profile of Artemisinin-Based Antimalarial ...

African Journals Online (AJOL)

The WHO in 2001 advocated artemisinin- based antimalarial combination therapy (ACT), which was adopted by Nigeria in 2005. The objective of this study was to characterize the safety and tolerability profile of the ACTs in adult patients with uncomplicated malaria. A descriptive longitudinal study was conducted in the ...

14 CFR 23.303 - Factor of safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Factor of safety. 23.303 Section 23.303... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Structure General § 23.303 Factor of safety. Unless otherwise provided, a factor of safety of 1.5 must be used. ...

Partial Safety Factors for Rubble Mound Breakwaters

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard; Burcharth, H. F.; Christiani, E.

1995-01-01

On the basis of the failure modes formulated in the various subtasks calibration of partial safety factors are described in this paper. The partial safety factors can be used to design breakwaters under quite different design conditions, namely probabilities of failure from 0.01 to 0.4, design...... lifetimes from 20 to 100 years and different qualities of wave data. A code of practice where safety is taken into account using partial safety factors is called a level I code. The partial safety factors are calibrated using First Order Reliability Methods (FORM, see Madsen et al. [1]) where...... in section 3. First Order Reliability Methods are described in section 4, and in section 5 it is shown how partial safety factors can be introduced and calibrated. The format of a code for design and analysis of rubble mound breakwaters is discussed in section 6. The mathematical formulation of the limit...

14 CFR 25.303 - Factor of safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Factor of safety. 25.303 Section 25.303... STANDARDS: TRANSPORT CATEGORY AIRPLANES Structure General § 25.303 Factor of safety. Unless otherwise specified, a factor of safety of 1.5 must be applied to the prescribed limit load which are considered...

A hierarchical factor analysis of a safety culture survey.

Science.gov (United States)

Frazier, Christopher B; Ludwig, Timothy D; Whitaker, Brian; Roberts, D Steve

2013-06-01

Recent reviews of safety culture measures have revealed a host of potential factors that could make up a safety culture (Flin, Mearns, O'Connor, & Bryden, 2000; Guldenmund, 2000). However, there is still little consensus regarding what the core factors of safety culture are. The purpose of the current research was to determine the core factors, as well as the structure of those factors that make up a safety culture, and establish which factors add meaningful value by factor analyzing a widely used safety culture survey. A 92-item survey was constructed by subject matter experts and was administered to 25,574 workers across five multi-national organizations in five different industries. Exploratory and hierarchical confirmatory factor analyses were conducted revealing four second-order factors of a Safety Culture consisting of Management Concern, Personal Responsibility for Safety, Peer Support for Safety, and Safety Management Systems. Additionally, a total of 12 first-order factors were found: three on Management Concern, three on Personal Responsibility, two on Peer Support, and four on Safety Management Systems. The resulting safety culture model addresses gaps in the literature by indentifying the core constructs which make up a safety culture. This clarification of the major factors emerging in the measurement of safety cultures should impact the industry through a more accurate description, measurement, and tracking of safety cultures to reduce loss due to injury. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

Finite element analysis in defining the optimal shape and safety factor of retentive clasp arms of removable partial denture

Directory of Open Access Journals (Sweden)

Šćepanović Miodrag

2013-01-01

Full Text Available Bacground/Aim. Retentive force of removable partial denture (RPD directly depends on elastic force of stretched retentive clasp arms (RCAs. During deflection RCA must have even stress distribution. Safety factor is the concept which can be applied in estimating durability and functionality of RCAs. This study was based on analyzing properties of clasps designed by conventional clasp wax profiles and defining the optimal shapes of RCAs for stress distribution and safety factor aspects. Methods. Computer-aided-design (CAD models of RCAs with simulated properties of materials used for fabrication of RPD cobalt-chromium-molybdenum (CoCrMo alloy, commercially pure titanium (CPTi and polyacetale were analyzed. Results. The research showed that geometrics of Rapidflex profiles from the BIOS concept are defined for designing and modeling RCAs from CoCrMo alloys. I-Bar and Bonihard clasps made from CPTi might have the same design as Co- CrMo clasp only by safety factor aspect, but it is obvious that CPTi are much more flexible, so their shape must be more massive. Polyacetale clasps should not be fabricated by BIOS concept for CoCrMo alloy. A proof for that is the low value of safety factor. Conclusion. The BIOS concept should be used only for RCAs made of CoCrMo alloy and different wax profiles should be used for fabricating clasps of other investigated materials. The contribution of this study may be the improvement of present systems for defining the clasps shapes made from CoCrMo alloys. The more significant application is possibility of creating new concepts in defining shapes of RCA made from CPTi and polyacetale.

Organizational factors in nuclear safety

International Nuclear Information System (INIS)

Wilpert, Bernhard

2000-01-01

The overall picture of factors which contributed to the event presents a panorama of a NPP where organizational and managerial characteristics were intricately intertwined and emerged as crucial for a general deterioration of the plant's capabilities to continually correct its deficiencies and optimize its operations. In the following author shall attempt to first cover various important efforts to modeling organizational factors relevant to safety. The second part of my presentation will offer an attempt towards an integrative model. The third part concludes with an agenda for research and practice. Most of the twelve different approaches above attempt to consider safety relevant organizational factors by way of pragmatic classifications. Together with their sub-categories we can count close to 160 different factors on various levels of abstraction. This is tantamount to say that most approaches lack systematic theoretical underpinnings. Thus then arises the question whether we need to develop a generic model, which promises to encompass these three major approaches altogether. Practical issues emerge particularly in the domain of organizational development, i.e. the goal oriented efforts to change the structures and the functioning of nuclear operations in such a way that the desired outputs in terms safety and reliability result in a sustained fashion. Again, these practical concerns are intimately related to developments and advances in theory and methodology. Only a close cooperation among scientists from various disciplines and of practitioners holds the promise of adequately understanding and use of organizational factors in future improving the safety record of nuclear industry worldwide. (S.Y.)

Human factors in nuclear safety oversight

International Nuclear Information System (INIS)

Taylor, K.

1989-01-01

The mission of the nuclear safety oversight function at the Savannah River Plant is to enhance the process and nuclear safety of site facilities. One of the major goals surrounding this mission is the reduction of human error. It is for this reason that several human factors engineers are assigned to the Operations assessment Group of the Facility Safety Evaluation Section (FSES). The initial task of the human factors contingent was the design and implementation of a site wide root cause analysis program. The intent of this system is to determine the most prevalent sources of human error in facility operations and to assist in determining where the limited human factors resources should be focused. In this paper the strategy used to educate the organization about the field of human factors is described. Creating an awareness of the importance of human factors engineering in all facets of design, operation, and maintenance is considered to be an important step in reducing the rate of human error

Motivation factors of surgical profile nurses work

OpenAIRE

Namajuškaitė, Vaida

2006-01-01

The aim of the study – investigate the motivation factors of surgical profile nurses work. The objectives of the study: 1. To investigate of satisfaction with work, to identify the motivation positive factors, emotional exhaustion of nurses, which are working in the surgical profile departments and operating-theaters. 2. To investigate negative factors (emotional exhaustion, salary, nursing load). 3. To give the offers for the main problems solutions. Hypothesis – the nurses m...

[Safety profile of zolpidem: two studies of 3805 patients by Swiss practitioners].

Science.gov (United States)

Ganzoni, E; Gugger, M

1999-06-24

Evaluation and treatment of insomnia are frequent procedures in the physician's everyday practice, since many patients seek medical treatment for this condition. Knowledge of pharmacological therapeutical alternatives is therefore decisive, in order to identify the most efficaceous and safe therapy for the patient among the available hypnotics. The short-acting hypnotic zolpidem has been investigated in Switzerland in two multicenter safety studies in ambulatory practice. In the first study 8.9% (n = 125 of 1,972 treated patients), and in the second 7.2% of the patients (n = 175 of 1,833 treated patients) reported an adverse event. The most frequent events were related to the central nervous system (CNS) (somnolence, headache, confusion, vertigo); gastrointestinal and cutaneous symptoms were the most frequent non CNS-dependent effects. New, unknown or serious adverse events were not found and no specific risk factor or population at risk was identified. The safety profile of zolpidem is consistent with its known pharmacological properties, the results of previous clinical trials and the international experience obtained in large patients groups.

Safety Profile of Cough and Cold Medication Use in Pediatrics.

Science.gov (United States)

Green, Jody L; Wang, George Sam; Reynolds, Kate M; Banner, William; Bond, G Randall; Kauffman, Ralph E; Palmer, Robert B; Paul, Ian M; Dart, Richard C

2017-06-01

The safety of cough and cold medication (CCM) use in children has been questioned. We describe the safety profile of CCMs in children pediatric (75.5%), and single-ingredient (77.5%) formulations were most commonly involved. AEs occurring in >20% of all cases included tachycardia, somnolence, hallucinations, ataxia, mydriasis, and agitation. Twenty cases (0.6%) resulted in death; most were in children pediatric liquid formulations were the most commonly reported products. These characteristics present an opportunity for targeted prevention efforts. Copyright © 2017 by the American Academy of Pediatrics.

Safety of Factor XIII Concentrate: Analysis of More than 20 Years of Pharmacovigilance Data

Science.gov (United States)

Solomon, Cristina; Korte, Wolfgang; Fries, Dietmar; Pendrak, Inna; Joch, Christine; Gröner, Albrecht; Birschmann, Ingvild

2016-01-01

Background Plasma-derived factor XIII (FXIII) concentrate is an effective treatment for FXIII deficiency. We describe adverse drug reactions (ADRs) reported during pharmacovigilance monitoring of Fibrogammin®/Corifact® and review published safety data. Methods Postmarketing safety reports recorded by CSL Behring from June 1993 to September 2013 were analyzed. Clinical studies published during the same period were also reviewed. Results Commercial data indicated that 1,653,450,333 IU FXIII concentrate were distributed over the review period, equivalent to 1,181,036 doses for a 70 kg patient. 75 cases were reported (one/15,700 standard doses or 22,046,000 IU). Reports of special interest included 12 cases of possible hypersensitivity reactions (one/98,400 doses or 137,787,500 IU), 7 with possible thromboembolic events (one/168,700 doses or 236,207,200 IU), 5 of possible inhibitor development (one/236,200 doses or 330,690,100 IU), and 20 of possible pathogen transmission (one/59,100 doses or 82,672,500 IU). 19 pathogen transmission cases involved viral infection; 4 could not be analyzed due to insufficient data, but for all others a causal relationship to the product was assessed as unlikely. A review of published literature revealed a similar safety profile. Conclusion Assessment of ADRs demonstrated that FXIII concentrate carries a low risk of ADRs across various clinical situations, suggesting a favorable safety profile. PMID:27781024

Prediction of safety critical software operational reliability from test reliability using testing environment factors

International Nuclear Information System (INIS)

Jung, Hoan Sung; Seong, Poong Hyun

1999-01-01

It has been a critical issue to predict the safety critical software reliability in nuclear engineering area. For many years, many researches have focused on the quantification of software reliability and there have been many models developed to quantify software reliability. Most software reliability models estimate the reliability with the failure data collected during the test assuming that the test environments well represent the operation profile. User's interest is however on the operational reliability rather than on the test reliability. The experiences show that the operational reliability is higher than the test reliability. With the assumption that the difference in reliability results from the change of environment, from testing to operation, testing environment factors comprising the aging factor and the coverage factor are developed in this paper and used to predict the ultimate operational reliability with the failure data in testing phase. It is by incorporating test environments applied beyond the operational profile into testing environment factors. The application results show that the proposed method can estimate the operational reliability accurately. (Author). 14 refs., 1 tab., 1 fig

Experimental validation of a Lyapunov-based controller for the plasma safety factor and plasma pressure in the TCV tokamak

Science.gov (United States)

Mavkov, B.; Witrant, E.; Prieur, C.; Maljaars, E.; Felici, F.; Sauter, O.; the TCV-Team

2018-05-01

In this paper, model-based closed-loop algorithms are derived for distributed control of the inverse of the safety factor profile and the plasma pressure parameter β of the TCV tokamak. The simultaneous control of the two plasma quantities is performed by combining two different control methods. The control design of the plasma safety factor is based on an infinite-dimensional setting using Lyapunov analysis for partial differential equations, while the control of the plasma pressure parameter is designed using control techniques for single-input and single-output systems. The performance and robustness of the proposed controller is analyzed in simulations using the fast plasma transport simulator RAPTOR. The control is then implemented and tested in experiments in TCV L-mode discharges using the RAPTOR model predicted estimates for the q-profile. The distributed control in TCV is performed using one co-current and one counter-current electron cyclotron heating actuation.

Organizational factors influencing improvements in safety

International Nuclear Information System (INIS)

Marcus, A.; Nichols, M.L.; Olson, J.; Osborn, R.; Thurber, J.

1992-01-01

Research reported here seeks to identify the key organizational factors that influence safety-related performance indicators in nuclear power plants over time. It builds upon organizational factors identified in NUREG/CR-5437, and begins to develop a theory of safety-related performance and performance improvement based on economic and behavioral theories of the firm. Central to the theory are concepts of past performance, problem recognition, resource availability, resource allocation, and business strategies that focus attention. Variables which reflect those concepts are combined in statistical models and tested for their ability to explain scrams, safety system actuations, significant events, safety system failures, radiation exposure, and critical hours. Results show the performance indicators differ with respect to the sets of variables which serve as the best predictors of future performance, and past performance is the most consistent predictor of future performance

Importance of human factors on nuclear installations safety

International Nuclear Information System (INIS)

Caruso, G.J.

1990-01-01

Actually, installations safety and, in particular the nuclear installations infer a strong incidence in human factors related to the design and operation of such installations. In general, the experience aims to that the most important accidents have happened as result of the components' failures combination and human failures in the operation of safety systems. Human factors in the nuclear installations may be divided into two areas: economy and human reliability. Human factors treatments for the safety evaluation of the nuclear installations allow to diagnose the weak points of man-machine interaction. (Author) [es

The role of psychological factors in workplace safety.

Science.gov (United States)

Kotzé, Martina; Steyn, Leon

2013-01-01

Workplace safety researchers and practitioners generally agree that it is necessary to understand the psychological factors that influence people's workplace safety behaviour. Yet, the search for reliable individual differences regarding psychological factors associated with workplace safety has lead to sparse results and inconclusive findings. The aim of this study was to investigate whether there are differences between the psychological factors, cognitive ability, personality and work-wellness of employees involved in workplace incidents and accidents and/or driver vehicle accidents and those who are not. The study population (N = 279) consisted of employees employed at an electricity supply organisation in South Africa. Mann-Whitney U-test and one-way ANOVA were conducted to determine the differences in the respective psychological factors between the groups. These results showed that cognitive ability did not seem to play a role in workplace incident/accident involvement, including driver vehicle accidents, while the wellness factors burnout and sense of coherence, as well as certain personality traits, namely conscientiousness, pragmatic and gregariousness play a statistically significant role in individuals' involvement in workplace incidents/accidents/driver vehicle accidents. Safety practitioners, managers and human resource specialists should take cognisance of the role of specifically work-wellness in workplace safety behaviour, as management can influence these negative states that are often caused by continuously stressful situations, and subsequently enhance work place safety.

Development of the safety evaluation system in the respects of organizational factors and workers' consciousness. Pt. 1. Study of validities of functions for necessary evaluation and results obtained

International Nuclear Information System (INIS)

Takano, Kenichi; Tsuge, Tadafumi; Hasegawa, Naoko; Hirose, Ayako; Sasou, Kunihide

2002-01-01

CRIEPI decided to develop the safety evaluation system to investigate the safety level of the industrial sites due to questionnaires of organizational climate, safety managements, and workers' safety consciousness to workers. This report describes the questionnaire survey to apply to the domestic nuclear power plant for using obtained results as a fundamental data in order to construct the safety evaluation system. This system will be used for promoting safety culture in organizations of nuclear power plants. The questionnaire survey was conducted to 14 nuclear power stations for understanding the present status relating to safety issues. This questionnaire involves 122 items classified into following three categories: (1) safety awareness and behavior of plant personnel; (2) safety management; (3) organizational climate, based on the model considering contributing factor groups to safety culture. Obtained results were analyzed by statistical method to prepare functions of evaluation. Additionally, by applying a multivariate analysis, it was possible to extract several crucial factors influencing safety performance and to find a comprehensive safety indicator representing total organizational safety level. Significant relations were identified between accident rates (both labor accidents and facility failures) and above comprehensive safety indicator. Next, 122 questionnaire items were classified into 20 major safety factors to grasp the safety profiles of each site. This profile is considered as indicating the features of each site and also indicating the direction of progress for improvement of safety situation in the site. These findings can be reflected in developing the safety evaluation system, by confirming the validity of the evaluation method and giving specific functions. (author)

Human factors in safety and business management.

Science.gov (United States)

Vogt, Joachim; Leonhardt, Jorg; Koper, Birgit; Pennig, Stefan

2010-02-01

Human factors in safety is concerned with all those factors that influence people and their behaviour in safety-critical situations. In aviation these are, for example, environmental factors in the cockpit, organisational factors such as shift work, human characteristics such as ability and motivation of staff. Careful consideration of human factors is necessary to improve health and safety at work by optimising the interaction of humans with their technical and social (team, supervisor) work environment. This provides considerable benefits for business by increasing efficiency and by preventing incidents/accidents. The aim of this paper is to suggest management tools for this purpose. Management tools such as balanced scorecards (BSC) are widespread instruments and also well known in aviation organisations. Only a few aviation organisations utilise management tools for human factors although they are the most important conditions in the safety management systems of aviation organisations. One reason for this is that human factors are difficult to measure and therefore also difficult to manage. Studies in other domains, such as workplace health promotion, indicate that BSC-based tools are useful for human factor management. Their mission is to develop a set of indicators that are sensitive to organisational performance and help identify driving forces as well as bottlenecks. Another tool presented in this paper is the Human Resources Performance Model (HPM). HPM facilitates the integrative assessment of human factors programmes on the basis of a systematic performance analysis of the whole system. Cause-effect relationships between system elements are defined in process models in a first step and validated empirically in a second step. Thus, a specific representation of the performance processes is developed, which ranges from individual behaviour to system performance. HPM is more analytic than BSC-based tools because HPM also asks why a certain factor is

Bicycling to school improves the cardiometabolic risk factor profile

DEFF Research Database (Denmark)

Ostergaard, Lars; Børrestad, Line A B; Tarp, Jakob

2012-01-01

To investigate whether bicycling to school improves cardiometabolic risk factor profile and cardiorespiratory fitness among children.......To investigate whether bicycling to school improves cardiometabolic risk factor profile and cardiorespiratory fitness among children....

Assessment of oral safety profile of aqueous extract blend of three ...

African Journals Online (AJOL)

... did not reveal any pathological changes attributable to treatment with the spice blend extract. Conclusions: These findings indicate that oral consumption of a spice blend of garlic, ginger and cayenne pepper in humans may be safe. Keywords: Spice blend, Toxicity, Histology, Marker enzymes, Medicinal, Safety profile ...

Organizational factors affecting safety implementation in food companies in Thailand.

Science.gov (United States)

Chinda, Thanwadee

2014-01-01

Thai food industry employs a massive number of skilled and unskilled workers. This may result in an industry with high incidences and accident rates. To improve safety and reduce the accident figures, this paper investigates factors influencing safety implementation in small, medium, and large food companies in Thailand. Five factors, i.e., management commitment, stakeholders' role, safety information and communication, supportive environment, and risk, are found important in helping to improve safety implementation. The statistical analyses also reveal that small, medium, and large food companies hold similar opinions on the risk factor, but bear different perceptions on the other 4 factors. It is also found that to improve safety implementation, the perceptions of safety goals, communication, feedback, safety resources, and supervision should be aligned in small, medium, and large companies.

A pedestal temperature model with self-consistent calculation of safety factor and magnetic shear

International Nuclear Information System (INIS)

Onjun, T; Siriburanon, T; Onjun, O

2008-01-01

A pedestal model based on theory-motivated models for the pedestal width and the pedestal pressure gradient is developed for the temperature at the top of the H-mode pedestal. The pedestal width model based on magnetic shear and flow shear stabilization is used in this study, where the pedestal pressure gradient is assumed to be limited by first stability of infinite n ballooning mode instability. This pedestal model is implemented in the 1.5D BALDUR integrated predictive modeling code, where the safety factor and magnetic shear are solved self-consistently in both core and pedestal regions. With the self-consistently approach for calculating safety factor and magnetic shear, the effect of bootstrap current can be correctly included in the pedestal model. The pedestal model is used to provide the boundary conditions in the simulations and the Multi-mode core transport model is used to describe the core transport. This new integrated modeling procedure of the BALDUR code is used to predict the temperature and density profiles of 26 H-mode discharges. Simulations are carried out for 13 discharges in the Joint European Torus and 13 discharges in the DIII-D tokamak. The average root-mean-square deviation between experimental data and the predicted profiles of the temperature and the density, normalized by their central values, is found to be about 14%

Determination of engineering safety factor -routine in Hungary (a methodology for the normal operation local power engineering safety factors)

International Nuclear Information System (INIS)

Szecsenyi, Z.; Korpas, L.; Bona, G.; Kereszturi, A.

2010-01-01

From the late nineties Paks Nuclear Power Plant-in collaboration with KFKI Atomic Energy Research Institute (KFKI AEKI)- is developing a system for determining the normal operation local power engineering safety factors. The system is based on a Monte Carlo sampling of the uncertain model input parameters. Additionally, the comparison of the calculation to the in-core measurements plays essential role for determining some important input parameters. By using new fuel types and the corresponding more recent detailed technological data, the applied method is being improved from time to time. Presently, the actually used and authorized engineering safety factors at Paks NPP are determined by using this method. In the paper, the system.s main properties are described (not going beyond the possible extent). The main points are as follows:-Mathematical definition of the engineering safety factor;-Sources of the uncertainties;-Input error propagation method constituting the basis of the system;-Flow-chart of the subsequent steps of the determination Finally, in the paper the engineering safety factors values of some selected parameters are presented as examples for demonstration of the capability of the method. (Authors)

New engineering safety factors for Loviisa NPP core calculations

Energy Technology Data Exchange (ETDEWEB)

Kuopanportti, Jaakko; Saarinen, Simo; Lahtinen, Tuukka; Ekstroem, Karoliina [Fortum Power and Heat Ltd., Fortum (Finland)

2017-09-15

In Loviisa NPP, there are two limiting thermal margins called the enthalpy rise margin and the linear heat rate margin that are monitored during normal operation. Engineering safety factors are applied in determination of both of these factors. The factors take into account the effect of various manufacturing tolerances, impact of the irradiation and simulation uncertainties on the local heat rate and on the enthalpy of the coolant. The engineering factors were re-evaluated during 2015 and the factors were approved by the Finnish radiation and nuclear safety authority in 2016. The re-evaluation was performed by considering all of the identified phenomena that affect the local heat rate or the enthalpy of the coolant. This paper summarizes the work that was performed during the re-evaluation of the engineering safety factors and presents the results for each uncertainty component. The new engineering safety factors are 1.115 for the linear heat rate and 1.100 for the enthalpy rise margin when the old factors were 1.12 and 1.16, respectively. The new factors improve the fuel economy by about 1%.

Patient safety climate profiles across time: Strength and level of safety climate associated with a quality improvement program in Switzerland—A cross-sectional survey study

Science.gov (United States)

Mascherek, Anna C.

2017-01-01

Safety Climate has been acknowledged as an unspecific factor influencing patient safety. However, studies rarely provide in-depth analysis of climate data. As a helpful approach, the concept of “climate strength” has been proposed. In the present study we tested the hypotheses that even if safety climate remains stable on mean-level across time, differences might be evident in strength or shape. The data of two hospitals participating in a large national quality improvement program were analysed for differences in climate profiles at two measurement occasions. We analysed differences on mean-level, differences in percent problematic response, agreement within groups, and frequency histograms in two large hospitals in Switzerland at two measurement occasions (2013 and 2015) applying the Safety Climate Survey. In total, survey responses of 1193 individuals were included in the analyses. Overall, small but significant differences on mean-level of safety climate emerged for some subgroups. Also, although agreement was strong at both time-points within groups, tendencies of divergence or consensus were present in both hospitals. Depending on subgroup and analyses chosen, differences were more or less pronounced. The present study illustrated that taking several measures into account and describing safety climate from different perspectives is necessary in order to fully understand differences and trends within groups and to develop interventions addressing the needs of different groups more precisely. PMID:28753633

ASSESSMENT OF RELATED ANAMNESTIC AND CLINICAL FACTORS ON EFFICACY AND SAFETY OF ANTI-HELICOBACTER PYLORI THERAPY

Directory of Open Access Journals (Sweden)

D. N. Andreev

2016-01-01

Full Text Available The article presents the results of a prospective clinical study in which 100 patients with H. pylori-associated peptic ulcer disease of stomach/duodenum were examined. The aim of the study was to assess the effect of concomitant anamnestic and clinical factors on the efficacy and safety of eradication therapy (ET. Type 2 diabetes mellitus is a factor that significantly reduces the efficiency of ET with OR 0.21 (95% CI 0,06-0,69, p = 0,0102. Using a macrolide antibiotics prior to ET during the previous 12 months is associated with a reduction in the effectiveness of H. pylori eradication with OR 0.27 (95% CI 0,08-0,90, p = 0,0342. Despite the lack of statistical significance observed negative effect on the efficiency of ET factors such as smoking and increased BMI. Smoking, female gender, age over 50 years and the presence of type 2 diabetes mellitus had no significant impact on the safety profile of ET. 

The PIANC Safety Factor System for Breakwaters

DEFF Research Database (Denmark)

Burcharth, H. F.

2000-01-01

The paper presents a summary of the recommendations for implementation of safety in breakwater designs given by the PIANC PTC IT Working Group No 12 on Analysis of Rubble Mound Breakwaters with Vertical and Inclined Concrete Walls. The working groups developed for the most important failure modes...... a system of partial safety factors which facilitate design to any target safety level....

Analysis of factors influencing safety management for metro construction in China.

Science.gov (United States)

Yu, Q Z; Ding, L Y; Zhou, C; Luo, H B

2014-07-01

With the rapid development of urbanization in China, the number and size of metro construction projects are increasing quickly. At the same time, and increasing number of accidents in metro construction make it a disturbing focus of social attention. In order to improve safety management in metro construction, an investigation of the participants' perspectives on safety factors in China metro construction has been conducted to identify the key safety factors, and their ranking consistency among the main participants, including clients, consultants, designers, contractors and supervisors. The result of factor analysis indicates that there are five key factors which influence the safety of metro construction including safety attitude, construction site safety, government supervision, market restrictions and task unpredictability. In addition, ANOVA and Spearman rank correlation coefficients were performed to test the consistency of the means rating and the ranking of safety factors. The results indicated that the main participants have significant disagreement about the importance of safety factors on more than half of the items. Suggestions and recommendations on practical countermeasures to improve metro construction safety management in China are proposed. Copyright © 2013 Elsevier Ltd. All rights reserved.

Demonstration of Risk Profiling for promoting safety in SME´s

DEFF Research Database (Denmark)

Jørgensen, Kirsten; Duijm, Nijs Jan; Troen, Hanne

2011-01-01

Purpose – The purpose of this paper is to identify and assess the risks and potential risks that may lead to accidents. It aims to look at how to improve risk assessment within SMEs for the benefit of all staff. Design/methodology/approach – The research included results from a Dutch project which...... identifies accident risks and safety barriers that are presented in a huge database and risk calculator. The method was first to develop a simple way of accessing this enormous amount of data, second, to develop a tool to observe risks and safety barriers in SMEs and to investigate the usefulness...... of the developed tools in real life, third, to collect data on risks and safety barriers in SMEs for two occupations by following 20 people for three days each and to create a risk profile for each occupations. Findings – The result is a simple way to go through all types of risks for accidents – a tool for risk...

mathematical models for prediction of safety factors for a simply

African Journals Online (AJOL)

HOD

Keywords: reliability, code calibration, load factor, safety factor, design, steel beam. 1. INTRODUCTION ... safety factors for the design of a simply supported steel beam using regression .... 5 design criteria for a solid timber portal frame.

SafetyNet. Human factors safety training on the Internet

DEFF Research Database (Denmark)

Hauland, G.; Pedrali, M.

2002-01-01

This report describes user requirements to an Internet based distance learning system of human factors training, i.e. the SafetyNet prototype, within the aviation (pilots and air traffic control), maritime and medical domains. User requirements totraining have been elicited through 19 semi...

Failure and factors of safety in piping system design

International Nuclear Information System (INIS)

Antaki, G.A.

1993-01-01

An important body of test and performance data on the behavior of piping systems has led to an ongoing reassessment of the code stress allowables and their safety margin. The codes stress allowables, and their factors of safety, are developed from limits on the incipient yield (for ductile materials), or incipient rupture (for brittle materials), of a test specimen loaded in simple tension. In this paper, we examine the failure theories introduced in the B31 and ASME III codes for piping and their inherent approximations compared to textbook failure theories. We summarize the evolution of factors of safety in ASME and B31 and point out that, for piping systems, it is appropriate to reconsider the concept and definition of factors of safety

Neural network evaluation of tokamak current profiles for real time control

Science.gov (United States)

Wróblewski, Dariusz

1997-02-01

Active feedback control of the current profile, requiring real-time determination of the current profile parameters, is envisioned for tokamaks operating in enhanced confinement regimes. The distribution of toroidal current in a tokamak is now routinely evaluated based on external (magnetic probes, flux loops) and internal (motional Stark effect) measurements of the poloidal magnetic field. However, the analysis involves reconstruction of magnetohydrodynamic equilibrium and is too intensive computationally to be performed in real time. In the present study, a neural network is used to provide a mapping from the magnetic measurements (internal and external) to selected parameters of the safety factor profile. The single-pass, feedforward calculation of output of a trained neural network is very fast, making this approach particularly suitable for real-time applications. The network was trained on a large set of simulated equilibrium data for the DIII-D tokamak. The database encompasses a large variety of current profiles including the hollow current profiles important for reversed central shear operation. The parameters of safety factor profile (a quantity related to the current profile through the magnetic field tilt angle) estimated by the neural network include central safety factor, q0, minimum value of q, qmin, and the location of qmin. Very good performance of the trained neural network both for simulated test data and for experimental datais demonstrated.

Neural network evaluation of tokamak current profiles for real time control

International Nuclear Information System (INIS)

Wroblewski, D.

1997-01-01

Active feedback control of the current profile, requiring real-time determination of the current profile parameters, is envisioned for tokamaks operating in enhanced confinement regimes. The distribution of toroidal current in a tokamak is now routinely evaluated based on external (magnetic probes, flux loops) and internal (motional Stark effect) measurements of the poloidal magnetic field. However, the analysis involves reconstruction of magnetohydrodynamic equilibrium and is too intensive computationally to be performed in real time. In the present study, a neural network is used to provide a mapping from the magnetic measurements (internal and external) to selected parameters of the safety factor profile. The single-pass, feedforward calculation of output of a trained neural network is very fast, making this approach particularly suitable for real-time applications. The network was trained on a large set of simulated equilibrium data for the DIII-D tokamak. The database encompasses a large variety of current profiles including the hollow current profiles important for reversed central shear operation. The parameters of safety factor profile (a quantity related to the current profile through the magnetic field tilt angle) estimated by the neural network include central safety factor, q 0 , minimum value of q, q min , and the location of q min . Very good performance of the trained neural network both for simulated test data and for experimental datais demonstrated. copyright 1997 American Institute of Physics

Study on possibility of plasma current profile determination using an analytical model of tokamak equilibrium

International Nuclear Information System (INIS)

Moriyama, Shin-ichi; Hiraki, Naoji

1996-01-01

The possibility of determining the current profile of tokamak plasma from the external magnetic measurements alone is investigated using an analytical model of tokamak equilibrium. The model, which is based on an approximate solution of the Grad-Shafranov equation, can set a plasma current profile expressed with four free parameters of the total plasma current, the poloidal beta, the plasma internal inductance and the axial safety factor. The analysis done with this model indicates that, for a D-shaped plasma, the boundary poloidal magnetic field prescribing the external magnetic field distribution is dependent on the axial safety factor in spite of keeping the boundary safety factor and the plasma internal inductance constant. This suggests that the plasma current profile is reversely determined from the external magnetic analysis. The possibility and the limitation of current profile determination are discussed through this analytical result. (author)

76 FR 35130 - Pipeline Safety: Control Room Management/Human Factors

Science.gov (United States)

2011-06-16

...: Control Room Management/Human Factors AGENCY: Pipeline and Hazardous Materials Safety Administration... the Control Room Management/Human Factors regulations in order to realize the safety benefits sooner... FR 5536). By this amendment to the Control Room Management/Human Factors (CRM) rule, an operator must...

Safety of recombinant human platelet-derived growth factor-BB in Augment® Bone Graft

Directory of Open Access Journals (Sweden)

Luis A Solchaga

2012-12-01

Full Text Available This article discusses nonclinical and clinical data regarding the safety of recombinant human platelet-derived growth factor-BB as a component of the Augment® Bone Graft (Augment. Augment is a bone graft substitute intended to be used as an alternative to autologous bone graft in the fusion of hindfoot and ankle joints. Nonclinical studies included assessment of the pharmacokinetic profile of intravenously administered recombinant human platelet-derived growth factor-BB in rat and dog, effects of intravenous administration of recombinant human platelet-derived growth factor-BB in a reproductive and development toxicity study in rats, and chronic toxicity and carcinogenicity of Augment in a 12-month implantation model. These studies showed that systemic exposure was brief and clearance was rapid. No signs of toxicity, carcinogenicity, or tumor promotion were observed even with doses far exceeding the maximum clinical dose. Results of clinical trials (605 participants and commercial use of recombinant human platelet-derived growth factor-BB containing products indicate that these products are not associated with increased incidence of adverse events or cancer. The safety data presented provide evidence that recombinant human platelet-derived growth factor-BB is a safe therapeutic when used in combination products as a single administration during surgical procedures for bone repair and fusion. There is no evidence associating use of recombinant human platelet-derived growth factor-BB in Augment with chronic toxicity, carcinogenicity, or tumor promotion.

Nuclear safety regulation on nuclear safety equipment activities in relation to human and organizational factors

International Nuclear Information System (INIS)

Li Tianshu

2013-01-01

Based on years of knowledge in nuclear safety supervision and experience of investigating and dealing with violation events in repair welding of DFHM, this paper analyzes major faults in manufacturing and maintaining activities of nuclear safety equipment in relation to human and organizational factors. It could be deducted that human and organizational factors has definitely become key features in the development of nuclear energy and technology. Some feasible measures to reinforce supervision on nuclear safety equipment activities have also been proposed. (author)

Partial Safety Factors and Target Reliability Level in Danish Structural Codes

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard; Hansen, J. O.; Nielsen, T. A.

2001-01-01

The partial safety factors in the newly revised Danish structural codes have been derived using a reliability-based calibration. The calibrated partial safety factors result in the same average reliability level as in the previous codes, but a much more uniform reliability level has been obtained....... The paper describes the code format, the stochastic models and the resulting optimised partial safety factors....

Safety against formation of through cracks of profiled fibre-reinforced cement sheets for roofing

DEFF Research Database (Denmark)

Hansen, Klavs Feilberg; Stang, Birgitte Friis Dela

2009-01-01

  Loads due to wind, snow or traffic on a roof determine the requirements to the strength and stiffness properties of profiled sheets for roofing. Apart from these loads, locked-in stresses can occur due to differences in temperature and moisture strains in the profiled sheets and the wooden laths...... supporting the sheets. These tensile and compressive stresses are induced in the sheets if they are firmly fastened to the laths with fastening screws. The purpose of this investigation was to analyse the safety of the profiled sheets in transmitting these loads without the formation of through cracks...

Factors Contribute to Safety Culture in the Manufacturing Industry in Malaysia

OpenAIRE

Ong Choon Hee

2014-01-01

The purpose of this paper is to explain the role of safety culture in the manufacturing industry in Malaysia and identify factors contribute to safety culture. It is suggested in this study that leadership support, management commitment and safety management system are important factors that contribute to safety culture. This study also provides theoretical implications to guide future research and offers practical implications to the managers in the development of safety culture. Given that ...

Neural network evaluation of tokamak current profiles for real time control (abstract)

Science.gov (United States)

Wróblewski, Dariusz

1997-01-01

Active feedback control of the current profile, requiring real-time determination of the current profile parameters, is envisioned for tokamaks operating in enhanced confinement regimes. The distribution of toroidal current in a tokamak is now routinely evaluated based on external (magnetic probes, flux loops) and internal (motional Stark effect) measurements of the poloidal magnetic field. However, the analysis involves reconstruction of magnetohydrodynamic equilibrium and is too intensive computationally to be performed in real time. In the present study, a neural network is used to provide a mapping from the magnetic measurements (internal and external) to selected parameters of the safety factor profile. The single-pass, feedforward calculation of output of a trained neural network is very fast, making this approach particularly suitable for real-time applications. The network was trained on a large set of simulated equilibrium data for the DIII-D tokamak. The database encompasses a large variety of current profiles including the hollow current profiles important for reversed central shear operation. The parameters of safety factor profile (a quantity related to the current profile through the magnetic field tilt angle) estimated by the neural network include central safety factor, q0, minimum value of q, qmin, and the location of qmin. Very good performance of the trained neural network both for simulated test data and for experimental data is demonstrated.

Neural network evaluation of tokamak current profiles for real time control (abstract)

International Nuclear Information System (INIS)

Wroblewski, D.

1997-01-01

Active feedback control of the current profile, requiring real-time determination of the current profile parameters, is envisioned for tokamaks operating in enhanced confinement regimes. The distribution of toroidal current in a tokamak is now routinely evaluated based on external (magnetic probes, flux loops) and internal (motional Stark effect) measurements of the poloidal magnetic field. However, the analysis involves reconstruction of magnetohydrodynamic equilibrium and is too intensive computationally to be performed in real time. In the present study, a neural network is used to provide a mapping from the magnetic measurements (internal and external) to selected parameters of the safety factor profile. The single-pass, feedforward calculation of output of a trained neural network is very fast, making this approach particularly suitable for real-time applications. The network was trained on a large set of simulated equilibrium data for the DIII-D tokamak. The database encompasses a large variety of current profiles including the hollow current profiles important for reversed central shear operation. The parameters of safety factor profile (a quantity related to the current profile through the magnetic field tilt angle) estimated by the neural network include central safety factor, q 0 , minimum value of q, q min , and the location of q min . Very good performance of the trained neural network both for simulated test data and for experimental data is demonstrated. copyright 1997 American Institute of Physics

The importance of Pharmacovigilance for the drug safety: Focus on cardiovascular profile of incretin-based therapy.

Science.gov (United States)

Sportiello, Liberata; Rafaniello, Concetta; Scavone, Cristina; Vitale, Cristiana; Rossi, Francesco; Capuano, Annalisa

2016-01-01

With the recent introduction of the new European Pharmacovigilance legislation, all new drugs must be carefully monitored after admission on the European market, in order to assess the long safety profile. Currently, special attention is given to several hypoglycemic agents with recent market approval (agonists of glucagon-like peptide-1 [GLP-1] receptor and dipeptidyl peptidase 4 inhibitors [DPP-4i]), which act through the potentiation of incretin hormone signaling. Their inclusion in European additional monitoring is also due to safety problems, which seem to characterize their pharmacological class. In fact, these drugs initially showed a good tolerability profile with mainly gastrointestinal adverse events, low risk of hypoglycemia and minor effects on body weight. But, new concerns such as infections, pancreatitis, pancreatic cancer and above all cardiovascular events (especially risk of heart failure requiring hospitalization) are now arising. In this review, we highlighted aspects of the new Pharmacovigilance European dispositions, and then we investigated the tolerability profile of incretin-based therapies, in particular DPP-4 inhibitors. Notably, we focused our attention on new safety concerns, which are emerging mostly in the post-marketing period, as the cardiovascular risk profile. Evidence in literature and opinions of regulatory agencies (e.g., European Medicines Agency and Food and Drug Administration) about risks of incretin-based therapies are yet controversial, and there are many open questions in particular on cancer and cardiovascular effects. Thus, it is important to continue to monitor closely the use of these drugs in clinical practice to improve the knowledge on their long-term safety and their place in diabetes therapy. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Assessment of the factors with significant influence on safety culture

International Nuclear Information System (INIS)

Farcasiu, M.; Nitoi, M.

2013-01-01

In this paper, a qualitative and a quantitative evaluation of the factors with significant impact on safety culture were performed. These techniques were established and applied in accordance with IAEA standards. In order to show the applicability and opportunity of the methodology a specific case study was prepared: safety culture evaluation for INR Pitesti. The qualitative evaluation was performed using specific developed questionnaires. Through analysis of the completed questionnaires was established the development stage of safety culture at INR. The quantitative evaluation was performed using a guide to rate the influence factors. For each factor was identified the influence (negative or positive) and ranking score was estimated using scoring criteria. The results have emphasized safety culture stages. The paper demonstrates the fact that using both quantitative and qualitative assessment techniques, a practical value of the safety culture concept is given. (authors)

Improving Safety through Human Factors Engineering.

Science.gov (United States)

Siewert, Bettina; Hochman, Mary G

2015-10-01

Human factors engineering (HFE) focuses on the design and analysis of interactive systems that involve people, technical equipment, and work environment. HFE is informed by knowledge of human characteristics. It complements existing patient safety efforts by specifically taking into consideration that, as humans, frontline staff will inevitably make mistakes. Therefore, the systems with which they interact should be designed for the anticipation and mitigation of human errors. The goal of HFE is to optimize the interaction of humans with their work environment and technical equipment to maximize safety and efficiency. Special safeguards include usability testing, standardization of processes, and use of checklists and forcing functions. However, the effectiveness of the safety program and resiliency of the organization depend on timely reporting of all safety events independent of patient harm, including perceived potential risks, bad outcomes that occur even when proper protocols have been followed, and episodes of "improvisation" when formal guidelines are found not to exist. Therefore, an institution must adopt a robust culture of safety, where the focus is shifted from blaming individuals for errors to preventing future errors, and where barriers to speaking up-including barriers introduced by steep authority gradients-are minimized. This requires creation of formal guidelines to address safety concerns, establishment of unified teams with open communication and shared responsibility for patient safety, and education of managers and senior physicians to perceive the reporting of safety concerns as a benefit rather than a threat. © RSNA, 2015.

Design of Vertical Wall Caisson Breakwaters using Partial Safety Factors

DEFF Research Database (Denmark)

Burcharth, H. F.; Sørensen, John Dalsgaard

1999-01-01

The paper presents a new system for implementation of target reliability in caisson breakwater designs by means of partial safety factors. The development of the system is explained, and tables of partial safety factors are presented for important overall stability failure modes related to caisson...

Factors that influence an elemental depth concentration profile

International Nuclear Information System (INIS)

McHugh, J.A.

1975-01-01

The use of secondary ion mass spectrometry in concentration profiling is discussed. Two classes of factors that influence an elemental concentration profile are instrumental effects and ion-matrix effects. Instrumental factors that must be considered are: (1) uniformity of the primary ion current density, (2) constancy of the primary ion current, (3) redeposition, (4) memory, (5) primary ion beam tailing and the nonfocused component, (6) chemical purity of the primary ion beam, and (7) residual gas impurities. Factors which can be classified as ion matrix effects are: (1) the mean escape depth of secondary ions, (2) recoil implantation, (3) molecular ion interferences, (4) primary ion beam induced diffusion of matrix species, (5) nonuniform sputter removal of matrix layers, and (6) implanted primary ion chemical and lattice damage effects

Modelling of safety barriers including human and organisational factors to improve process safety

DEFF Research Database (Denmark)

Markert, Frank; Duijm, Nijs Jan; Thommesen, Jacob

2013-01-01

It is believed that traditional safety management needs to be improved on the aspect of preparedness for coping with expected and unexpected deviations, avoiding an overly optimistic reliance on safety systems. Remembering recent major accidents, such as the Deep Water Horizon, the Texas City....... A valuable approach is the inclusion of human and organisational factors into the simulation of the reliability of the technical system using event trees and fault trees and the concept of safety barriers. This has been demonstrated e.g. in the former European research project ARAMIS (Accidental Risk...

Human factor in the problem of Russian nuclear industry safety

International Nuclear Information System (INIS)

Abramova, V.

2002-01-01

The approach to human factor definition, considered in the paper, consists of recognition of as many as possible factors for developing a complete list of factors, which have influence on mistakes or successful work of NPP personnel. Safety culture is considered as the main factor. The enhancement in nuclear power industry includes an optimization of organizational structures and development of personnel safety attitudes. The organizational factors, as possible root causes for human errors, need to be identified, assessed and improved. The organizational activities taken in Russia are presented

Confounding factors and genetic polymorphism in the evaluation of individual steroid profiling

Science.gov (United States)

Kuuranne, Tiia; Saugy, Martial; Baume, Norbert

2014-01-01

In the fight against doping, steroid profiling is a powerful tool to detect drug misuse with endogenous anabolic androgenic steroids. To establish sensitive and reliable models, the factors influencing profiling should be recognised. We performed an extensive literature review of the multiple factors that could influence the quantitative levels and ratios of endogenous steroids in urine matrix. For a comprehensive and scientific evaluation of the urinary steroid profile, it is necessary to define the target analytes as well as testosterone metabolism. The two main confounding factors, that is, endogenous and exogenous factors, are detailed to show the complex process of quantifying the steroid profile within WADA-accredited laboratories. Technical aspects are also discussed as they could have a significant impact on the steroid profile, and thus the steroid module of the athlete biological passport (ABP). The different factors impacting the major components of the steroid profile must be understood to ensure scientifically sound interpretation through the Bayesian model of the ABP. Not only should the statistical data be considered but also the experts in the field must be consulted for successful implementation of the steroidal module. PMID:24764553

Reliability Analysis and Calibration of Partial Safety Factors for Redundant Structures

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard

1998-01-01

Redundancy is important to include in the design and analysis of structural systems. In most codes of practice redundancy is not directly taken into account. In the paper various definitions of a deterministic and reliability based redundancy measure are reviewed. It is described how reundancy can...... be included in the safety system and how partial safety factors can be calibrated. An example is presented illustrating how redundancy is taken into account in the safety system in e.g. the Danish codes. The example shows how partial safety factors can be calibrated to comply with the safety level...

Modifying locally the safety profile to improve the confinement of magnetic field lines in tokamak plasmas

International Nuclear Information System (INIS)

Constantinescu, D.; Firpo, M.-C.

2012-01-01

Using Hamiltonian models for the magnetic field lines, we propose a methodology to improve their confinement through the creation of transport barriers. A local modification of the safety profile creating a low-shear zone is shown to be sufficient to locally enhance drastically the regularity of the magnetic field lines without requesting a reversed shear. The optimal benefits of low-shear are obtained when the value q 0 of the safety profile in the low-shear zone is sufficiently far from the main resonance values m/n with low m and n, in the case of large enough values of those (m, n) mode amplitudes. A practical implementation in tokamak plasmas should involve electron cyclotron current drive to locally modify the magnetic shear. (paper)

Patient safety - the role of human factors and systems engineering.

Science.gov (United States)

Carayon, Pascale; Wood, Kenneth E

2010-01-01

Patient safety is a global challenge that requires knowledge and skills in multiple areas, including human factors and systems engineering. In this chapter, numerous conceptual approaches and methods for analyzing, preventing and mitigating medical errors are described. Given the complexity of healthcare work systems and processes, we emphasize the need for increasing partnerships between the health sciences and human factors and systems engineering to improve patient safety. Those partnerships will be able to develop and implement the system redesigns that are necessary to improve healthcare work systems and processes for patient safety.

Patient Safety: The Role of Human Factors and Systems Engineering

Science.gov (United States)

Carayon, Pascale; Wood, Kenneth E.

2011-01-01

Patient safety is a global challenge that requires knowledge and skills in multiple areas, including human factors and systems engineering. In this chapter, numerous conceptual approaches and methods for analyzing, preventing and mitigating medical errors are described. Given the complexity of healthcare work systems and processes, we emphasize the need for increasing partnerships between the health sciences and human factors and systems engineering to improve patient safety. Those partnerships will be able to develop and implement the system redesigns that are necessary to improve healthcare work systems and processes for patient safety. PMID:20543237

Defining safety goals. 2. Basic Consideration on Defining Safety Goals

International Nuclear Information System (INIS)

Hakata, T.

2001-01-01

The purpose of this study is to develop basic safety goals that are rational and consistent for all nuclear facilities, including nuclear power plants and fuel cycle facilities. Basic safety goals (risk limits) by an index of radiation dose are discussed, which are based on health effects of detriment and fatality and risk levels presumably accepted by society. The contents of this paper are the personal opinions of the author. The desirable structure of safety goals is assumed to be 'basic safety goals plus specific safety goals (or supplemental safety goals) for each sort of facility, which reflects their characteristics'. The requisites of the basic safety goals must include (a) rational bases (scientific and social), (b) comprehensiveness (common to all sorts of nuclear facilities covering from normal to accidental conditions), and (c) applicability. To meet the requirements, the basic safety goals might have to be a risk profile expression by an index of radiation dose. The societal rationality is consideration of absolute risk levels (10 -6 or 10 -7 /yr) and/or relative risk factors (such as 0.1% of U.S. safety goals) that the general public accepts as tolerable. The following quantitative objectives are adopted in this study for protection of average individuals in the vicinity of a nuclear facility: 1. The additive annual radiation dose during normal operation must be -4 /yr (health detriment), 2x10 -6 /yr (latent cancer and severe hereditary effects), and 10 -7 /yr (acute fatality) from the statistics in Japan. The radiation effects on human beings are determined by recommendations of UNSCEAR (Ref. 1) and ICRP. The health effects considered are non-severe stochastic health detriment, i.e., detectable opacities of lens of eye (threshold 5 0.5 to 2 Sv), depression of hematopoiesis of bone marrow (0.5 Sv), and depression of reproductive capability (temporary sterility of testes ) (0.15 Sv). The LD 50/60 of acute fatality is ∼4 Sv, and fatalities by latent

Patient safety risk factors in minimally invasive surgery : A validation study

NARCIS (Netherlands)

Rodrigues, S.P.; Ter Kuile, M.; Dankelman, J.; Jansen, F.W.

2012-01-01

This study was conducted to adapt and validate a patient safety (PS) framework for minimally invasive surgery (MIS) as a first step in understanding the clinical relevance of various PS risk factors in MIS. Eight patient safety risk factor domains were identified using frameworks from a systems

Systematic review: cardiovascular safety profile of 5-HT(4) agonists developed for gastrointestinal disorders.

Science.gov (United States)

Tack, J; Camilleri, M; Chang, L; Chey, W D; Galligan, J J; Lacy, B E; Müller-Lissner, S; Quigley, E M M; Schuurkes, J; De Maeyer, J H; Stanghellini, V

2012-04-01

The nonselective 5-HT(4) receptor agonists, cisapride and tegaserod have been associated with cardiovascular adverse events (AEs). To perform a systematic review of the safety profile, particularly cardiovascular, of 5-HT(4) agonists developed for gastrointestinal disorders, and a nonsystematic summary of their pharmacology and clinical efficacy. Articles reporting data on cisapride, clebopride, prucalopride, mosapride, renzapride, tegaserod, TD-5108 (velusetrag) and ATI-7505 (naronapride) were identified through a systematic search of the Cochrane Library, Medline, Embase and Toxfile. Abstracts from UEGW 2006-2008 and DDW 2008-2010 were searched for these drug names, and pharmaceutical companies approached to provide unpublished data. Retrieved articles on pharmacokinetics, human pharmacodynamics and clinical data with these 5-HT(4) agonists, are reviewed and summarised nonsystematically. Articles relating to cardiac safety and tolerability of these agents, including any relevant case reports, are reported systematically. Two nonselective 5-HT(4) agonists had reports of cardiovascular AEs: cisapride (QT prolongation) and tegaserod (ischaemia). Interactions with, respectively, the hERG cardiac potassium channel and 5-HT(1) receptor subtypes have been suggested to account for these effects. No cardiovascular safety concerns were reported for the newer, selective 5-HT(4) agonists prucalopride, velusetrag, naronapride, or for nonselective 5-HT(4) agonists with no hERG or 5-HT(1) affinity (renzapride, clebopride, mosapride). 5-HT(4) agonists for GI disorders differ in chemical structure and selectivity for 5-HT(4) receptors. Selectivity for 5-HT(4) over non-5-HT(4) receptors may influence the agent's safety and overall risk-benefit profile. Based on available evidence, highly selective 5-HT(4) agonists may offer improved safety to treat patients with impaired GI motility. © 2012 Blackwell Publishing Ltd.

Systematic review: cardiovascular safety profile of 5-HT4 agonists developed for gastrointestinal disorders

Science.gov (United States)

Tack, J; Camilleri, M; Chang, L; Chey, W D; Galligan, J J; Lacy, B E; Müller-Lissner, S; Quigley, E M M; Schuurkes, J; Maeyer, J H; Stanghellini, V

2012-01-01

Summary Background The nonselective 5-HT4 receptor agonists, cisapride and tegaserod have been associated with cardiovascular adverse events (AEs). Aim To perform a systematic review of the safety profile, particularly cardiovascular, of 5-HT4 agonists developed for gastrointestinal disorders, and a nonsystematic summary of their pharmacology and clinical efficacy. Methods Articles reporting data on cisapride, clebopride, prucalopride, mosapride, renzapride, tegaserod, TD-5108 (velusetrag) and ATI-7505 (naronapride) were identified through a systematic search of the Cochrane Library, Medline, Embase and Toxfile. Abstracts from UEGW 2006–2008 and DDW 2008–2010 were searched for these drug names, and pharmaceutical companies approached to provide unpublished data. Results Retrieved articles on pharmacokinetics, human pharmacodynamics and clinical data with these 5-HT4 agonists, are reviewed and summarised nonsystematically. Articles relating to cardiac safety and tolerability of these agents, including any relevant case reports, are reported systematically. Two nonselective 5-HT4 agonists had reports of cardiovascular AEs: cisapride (QT prolongation) and tegaserod (ischaemia). Interactions with, respectively, the hERG cardiac potassium channel and 5-HT1 receptor subtypes have been suggested to account for these effects. No cardiovascular safety concerns were reported for the newer, selective 5-HT4 agonists prucalopride, velusetrag, naronapride, or for nonselective 5-HT4 agonists with no hERG or 5-HT1 affinity (renzapride, clebopride, mosapride). Conclusions 5-HT4 agonists for GI disorders differ in chemical structure and selectivity for 5-HT4 receptors. Selectivity for 5-HT4 over non-5-HT4 receptors may influence the agent's safety and overall risk–benefit profile. Based on available evidence, highly selective 5-HT4 agonists may offer improved safety to treat patients with impaired GI motility. PMID:22356640

Relative safety profiles of high dose statin regimens

Directory of Open Access Journals (Sweden)

Carlos Escobar

2008-06-01

Full Text Available Carlos Escobar, Rocio Echarri, Vivencio BarriosDepartment of Cardiology, Hospital Ramón y Cajal, Madrid, SpainAbstract: Recent clinical trials recommend achieving a low-density lipoprotein cholesterol level of <100 mg/dl in high-risk and <70 mg/dl in very high risk patients. To attain these goals, however, many patients will need statins at high doses. The most frequent side effects related to the use of statins, myopathy, rhabdomyolysis, and increased levels of transaminases, are unusual. Although low and moderate doses show a favourable profile, there is concern about the tolerability of higher doses. During recent years, numerous trials to analyze the efficacy and tolerability of high doses of statins have been published. This paper updates the published data on the safety of statins at high doses.Keywords: statins, high doses, tolerability, liver, muscle

Gadobutrol for contrast-enhanced magnetic resonance imaging in elderly patients: review of the safety profile from clinical trial, post-marketing surveillance, and pharmacovigilance data

International Nuclear Information System (INIS)

Endrikat, J.; Schwenke, C.; Prince, M.R.

2015-01-01

Aim: To assess the safety of gadobutrol administration in elderly patients (≥65 years) by comparing the incidence of adverse drug reactions (ADRs) following gadobutrol-enhanced magnetic resonance imaging (MRI) procedures in elderly patients with that in adults aged 18–64 years. Materials and methods: Safety data on gadobutrol administration from clinical trials, post-marketing surveillance (PMS) studies, and pharmacovigilance reports were collected in three databases. In each dataset, absolute and relative frequencies of ADRs between age groups were analysed, along with odds ratios and 95% confidence intervals. Logistic regression was used to identify significant influencing factors on ADRs in the PMS and pharmacovigilance data. Results: Rates of reported ADRs were lower in elderly patients versus adults aged <65 years due to a reduced incidence of non-serious ADRs; this was statistically significant for the clinical trials and pharmacovigilance populations, with a trend in the PMS database. Serious ADRs occurred infrequently in the clinical trials and PMS populations (too low for statistical comparison), and pharmacovigilance data demonstrated a low incidence (<0.005%) in both age groups. Conclusions: This evaluation involving three large databases demonstrated no greater incidence of ADRs following gadobutrol-enhanced MRI in elderly patients (≥65 years) compared with younger adults, with gadobutrol having a favourable safety profile in both age groups. -- Highlights: •First dedicated safety study of an extracellular contrast agent in the elderly. •Elderly patients experience fewer non-serious ADRs than younger adults. •Gadobutrol has a favourable safety profile in both age groups

Human factors and safety in emergency medicine

Science.gov (United States)

Schaefer, H. G.; Helmreich, R. L.; Scheidegger, D.

1994-01-01

A model based on an input process and outcome conceptualisation is suggested to address safety-relevant factors in emergency medicine. As shown in other dynamic and demanding environments, human factors play a decisive role in attaining high quality service. Attitudes held by health-care providers, organisational shells and work-cultural parameters determine communication, conflict resolution and workload distribution within and between teams. These factors should be taken into account to improve outcomes such as operational integrity, job satisfaction and morale.

To the problem of the statistical basis of evaluation of the mechanical safety factor

International Nuclear Information System (INIS)

Tsyganov, S.V.

2009-01-01

The methodology applied for the safety factor assessment of the WWER fuel cycles uses methods and terms of statistics. Value of the factor is calculated on the basis of estimation of probability to meet predefined limits. Such approach demands the special attention to the statistical properties of parameters of interest. Considering the mechanical constituents of the engineering factor it is assumed uncertainty factors of safety parameters are stochastic values. It characterized by probabilistic distributions that can be unknown. Traditionally in the safety factor assessment process the unknown parameters are estimated from the conservative points of view. This paper analyses how the refinement of the factors distribution parameters is important for the assessment of the mechanical safety factor. For the analysis the statistical approach is applied for modelling of different type of factor probabilistic distributions. It is shown the significant influence of the shape and parameters of distributions for some factors on the value of mechanical safety factor. (Authors)

To the problem of the statistical basis of evaluation of the mechanical safety factor

International Nuclear Information System (INIS)

Tsyganov, S.

2009-01-01

The methodology applied for the safety factor assessment of the VVER fuel cycles uses methods and terms of statistics. Value of the factor is calculated on the basis of estimation of probability to meet predefined limits. Such approach demands the special attention to the statistical properties of parameters of interest. Considering the mechanical constituents of the engineering factor it is assumed uncertainty factors of safety parameters are stochastic values. It characterized by probabilistic distributions that can be unknown. Traditionally in the safety factor assessment process the unknown parameters are estimated from the conservative points of view. This paper analyses how the refinement of the factors distribution parameters is important for the assessment of the mechanical safety factor. For the analysis the statistical approach is applied for modelling of different type of factor probabilistic distributions. It is shown the significant influence of the shape and parameters of distributions for some factors on the value of mechanical safety factor. (author)

New geometric design consistency model based on operating speed profiles for road safety evaluation.

Science.gov (United States)

Camacho-Torregrosa, Francisco J; Pérez-Zuriaga, Ana M; Campoy-Ungría, J Manuel; García-García, Alfredo

2013-12-01

To assist in the on-going effort to reduce road fatalities as much as possible, this paper presents a new methodology to evaluate road safety in both the design and redesign stages of two-lane rural highways. This methodology is based on the analysis of road geometric design consistency, a value which will be a surrogate measure of the safety level of the two-lane rural road segment. The consistency model presented in this paper is based on the consideration of continuous operating speed profiles. The models used for their construction were obtained by using an innovative GPS-data collection method that is based on continuous operating speed profiles recorded from individual drivers. This new methodology allowed the researchers to observe the actual behavior of drivers and to develop more accurate operating speed models than was previously possible with spot-speed data collection, thereby enabling a more accurate approximation to the real phenomenon and thus a better consistency measurement. Operating speed profiles were built for 33 Spanish two-lane rural road segments, and several consistency measurements based on the global and local operating speed were checked. The final consistency model takes into account not only the global dispersion of the operating speed, but also some indexes that consider both local speed decelerations and speeds over posted speeds as well. For the development of the consistency model, the crash frequency for each study site was considered, which allowed estimating the number of crashes on a road segment by means of the calculation of its geometric design consistency. Consequently, the presented consistency evaluation method is a promising innovative tool that can be used as a surrogate measure to estimate the safety of a road segment. Copyright © 2012 Elsevier Ltd. All rights reserved.

Factors impacting on the microbiological quality and safety of ...

African Journals Online (AJOL)

Problems with the safety and shelf life of export hake have been raised by the Namibian fishing industry. This prompted an investigation into the factors that may have an impact on the microbiological quality and safety of processed hake. Samples were collected along the processing line; the general microbiological quality ...

Inroads into Equestrian Safety: Rider-Reported Factors Contributing to Horse-Related Accidents and Near Misses on Australian Roads

Science.gov (United States)

Thompson, Kirrilly; Matthews, Chelsea

2015-01-01

Simple Summary Riding horses on roads can be dangerous, but little is known about accidents and near misses. To explore road safety issues amongst Australian equestrians, we conducted an online survey. More than half of all riders (52%) reported having experienced at least one accident or near miss in the 12 months prior to the survey, mostly attributed to speed. Whilst our findings confirmed factors identified overseas, we also identified issues around road rules, hand signals and road rage. This paper suggests strategies for improving the safety of horses, riders and other road users. Abstract Horse riding and horse-related interactions are inherently dangerous. When they occur on public roads, the risk profile of equestrian activities is complicated by interactions with other road users. Research has identified speed, proximity, visibility, conspicuity and mutual misunderstanding as factors contributing to accidents and near misses. However, little is known about their significance or incidence in Australia. To explore road safety issues amongst Australian equestrians, we conducted an online survey. More than half of all riders (52%) reported having experienced at least one accident or near miss in the 12 months prior to the survey. Whilst our findings confirm the factors identified overseas, we also identified issues around rider misunderstanding of road rules and driver misunderstanding of rider hand signals. Of particular concern, we also found reports of potentially dangerous rider-directed road rage. We identify several areas for potential safety intervention including (1) identifying equestrians as vulnerable road users and horses as sentient decision-making vehicles; (2) harmonising laws regarding passing horses; (3) mandating personal protective equipment; (4) improving road signage; (5) comprehensive data collection; (6) developing mutual understanding amongst road-users; (7) safer road design and alternative riding spaces; and (8) increasing investment

Safety and Efficacy Profile of Commercial Veterinary Vaccines against Rift Valley Fever: A Review Study

Directory of Open Access Journals (Sweden)

Moataz Alhaj

2016-01-01

Full Text Available Rift Valley Fever (RVF is an infectious illness with serious clinical manifestations and health consequences in humans as well as a wide range of domestic ruminants. This review provides significant information about the prevention options of RVF along with the safety-efficacy profile of commercial vaccines and some of RVF vaccination strategies. Information presented in this paper was obtained through a systematic investigation of published data about RVF vaccines. Like other viral diseases, the prevention of RVF relies heavily on immunization of susceptible herds with safe and cost-effective vaccine that is able to confer long-term protective immunity. Several strains of RVF vaccines have been developed and are available in commercial production including Formalin-Inactivated vaccine, live attenuated Smithburn vaccine, and the most recent Clone13. Although Formalin-Inactivated vaccine and live attenuated Smithburn vaccine are immunogenic and widely used in prevention programs, they proved to be accompanied by significant concerns. Despite Clone13 vaccine being suggested as safe in pregnant ewes and as highly immunogenic along with its potential for differentiating infected from vaccinated animals (DIVA, a recent study raised concerns about the safety of the vaccine during the first trimester of gestation. Accordingly, RVF vaccines that are currently available in the market to a significant extent do not fulfill the requirements of safety, potency, and DIVA. These adverse effects stressed the need for developing new vaccines with an excellent safety profile to bridge the gap in safety and immunity. Bringing RVF vaccine candidates to local markets besides the absence of validated serological test for DIVA remain the major challenges of RVF control.

Inroads into Equestrian Safety: Rider-Reported Factors Contributing to Horse-Related Accidents and Near Misses on Australian Roads

Directory of Open Access Journals (Sweden)

Kirrilly Thompson

2015-07-01

Full Text Available Horse riding and horse-related interactions are inherently dangerous. When they occur on public roads, the risk profile of equestrian activities is complicated by interactions with other road users. Research has identified speed, proximity, visibility, conspicuity and mutual misunderstanding as factors contributing to accidents and near misses. However, little is known about their significance or incidence in Australia. To explore road safety issues amongst Australian equestrians, we conducted an online survey. More than half of all riders (52% reported having experienced at least one accident or near miss in the 12 months prior to the survey. Whilst our findings confirm the factors identified overseas, we also identified issues around rider misunderstanding of road rules and driver misunderstanding of rider hand signals. Of particular concern, we also found reports of potentially dangerous rider-directed road rage. We identify several areas for potential safety intervention including (1 identifying equestrians as vulnerable road users and horses as sentient decision-making vehicles (2 harmonising laws regarding passing horses, (3 mandating personal protective equipment, (4 improving road signage, (5 comprehensive data collection, (6 developing mutual understanding amongst road-users, (7 safer road design and alternative riding spaces; and (8 increasing investment in horse-related safety initiatives.

Inroads into Equestrian Safety: Rider-Reported Factors Contributing to Horse-Related Accidents and Near Misses on Australian Roads.

Science.gov (United States)

Thompson, Kirrilly; Matthews, Chelsea

2015-07-22

Horse riding and horse-related interactions are inherently dangerous. When they occur on public roads, the risk profile of equestrian activities is complicated by interactions with other road users. Research has identified speed, proximity, visibility, conspicuity and mutual misunderstanding as factors contributing to accidents and near misses. However, little is known about their significance or incidence in Australia. To explore road safety issues amongst Australian equestrians, we conducted an online survey. More than half of all riders (52%) reported having experienced at least one accident or near miss in the 12 months prior to the survey. Whilst our findings confirm the factors identified overseas, we also identified issues around rider misunderstanding of road rules and driver misunderstanding of rider hand signals. Of particular concern, we also found reports of potentially dangerous rider-directed road rage. We identify several areas for potential safety intervention including (1) identifying equestrians as vulnerable road users and horses as sentient decision-making vehicles (2) harmonising laws regarding passing horses, (3) mandating personal protective equipment, (4) improving road signage, (5) comprehensive data collection, (6) developing mutual understanding amongst road-users, (7) safer road design and alternative riding spaces; and (8) increasing investment in horse-related safety initiatives.

Evaluating the impact of grade crossing safety factors through signal detection theory

Science.gov (United States)

2012-10-22

The purpose of this effort was to apply signal detection theory to descriptively model the impact : of five grade crossing safety factors to understand their effect on driver decision making. The : safety factors consisted of: improving commercial mo...

Safety profile and long-term engraftment of human CD31+ blood progenitors in bone tissue engineering.

Science.gov (United States)

Zigdon-Giladi, Hadar; Elimelech, Rina; Michaeli-Geller, Gal; Rudich, Utai; Machtei, Eli E

2017-07-01

Endothelial progenitor cells (EPCs) participate in angiogenesis and induce favorable micro-environments for tissue regeneration. The efficacy of EPCs in regenerative medicine is extensively studied; however, their safety profile remains unknown. Therefore, our aims were to evaluate the safety profile of human peripheral blood-derived EPCs (hEPCs) and to assess the long-term efficacy of hEPCs in bone tissue engineering. hEPCs were isolated from peripheral blood, cultured and characterized. β tricalcium phosphate scaffold (βTCP, control) or 10 6 hEPCs loaded onto βTCP were transplanted in a nude rat calvaria model. New bone formation and blood vessel density were analyzed using histomorphometry and micro-computed tomography (CT). Safety of hEPCs using karyotype analysis, tumorigenecity and biodistribution to target organs was evaluated. On the cellular level, hEPCs retained their karyotype during cell expansion (seven passages). Five months following local hEPC transplantation, on the tissue and organ level, no inflammatory reaction or dysplastic change was evident at the transplanted site or in distant organs. Direct engraftment was evident as CD31 human antigens were detected lining vessel walls in the transplanted site. In distant organs human antigens were absent, negating biodistribution. Bone area fraction and bone height were doubled by hEPC transplantation without affecting mineral density and bone architecture. Additionally, local transplantation of hEPCs increased blood vessel density by nine-fold. Local transplantation of hEPCs showed a positive safety profile. Furthermore, enhanced angiogenesis and osteogenesis without mineral density change was found. These results bring us one step closer to first-in-human trials using hEPCs for bone regeneration. Copyright © 2017 International Society for Cellular Therapy. Published by Elsevier Inc. All rights reserved.

Studying the Relationship between Individual and Organizational Factors and Nurses' Perception of Patient Safety Culture

Directory of Open Access Journals (Sweden)

Farahnaz Abdolahzadeh

2012-11-01

Full Text Available Introduction: Safety culture is considered as an important factor in improving patient safety. Therefore, identifying individual and organizational factors affecting safety culture is crucial. This study was carried out to determine individual and organizational factors associated with nurses' perception of patient safety culture. Methods: The present descriptive study included 940 nurses working in four training hospitals affiliated with Urmia University of Medical Sciences (Iran. Data was collected through the self-report questionnaire of patient safety culture. Descriptive (number, percent, mean, and standard deviation and inferential (t-test and analysis of variance statistics were used to analyze the data in SPSS. Results: Nurses' perception of patient safety culture was significantly correlated with marital status, workplace, and overtime hours. Conclusion: The results of this study revealed that some individual and organizational factors can impact on nurses' perception of patient safety culture. Nursing authorities should thus pay more attention to factors which promote patient safety culture and ultimately the safety of provided services.

Human factors in safety assessment. Safety culture assessment

International Nuclear Information System (INIS)

Zhang Li; Deng Zhiliang; Wang Yiqun; Huang Weigang

1996-01-01

This paper analyses the present conditions and problems in enterprises safety assessment, and introduces the characteristics and effects of safety culture. The authors think that safety culture must be used as a 'soul' to form the pattern of modern safety management. Furthermore, they propose that the human safety and synthetic safety management assessment in a system should be changed into safety culture assessment. Finally, the assessment indicators are discussed

Human factors and systems engineering approach to patient safety for radiotherapy.

Science.gov (United States)

Rivera, A Joy; Karsh, Ben-Tzion

2008-01-01

The traditional approach to solving patient safety problems in healthcare is to blame the last person to touch the patient. But since the publication of To Err is Human, the call has been instead to use human factors and systems engineering methods and principles to solve patient safety problems. However, an understanding of the human factors and systems engineering is lacking, and confusion remains about what it means to apply their principles. This paper provides a primer on them and their applications to patient safety.

Human Factors and Systems Engineering Approach to Patient Safety for Radiotherapy

International Nuclear Information System (INIS)

Rivera, A. Joy; Karsh, Ben-Tzion

2008-01-01

The traditional approach to solving patient safety problems in healthcare is to blame the last person to touch the patient. But since the publication of To Err is Human, the call has been instead to use human factors and systems engineering methods and principles to solve patient safety problems. However, an understanding of the human factors and systems engineering is lacking, and confusion remains about what it means to apply their principles. This paper provides a primer on them and their applications to patient safety

Modelling of Safety Factors in the Design of GRP Composite Products

DEFF Research Database (Denmark)

Babu, B.J.C.; Prabhakaran, R.T. Durai; Lystrup, Aage

2010-01-01

as independent, while in real applications these factors may interact/influence each other. Following the concept developed by the authors, a simple graph theoretic model has been used to determine overall factor of safety. This is described with the help of an example and it has been demonstrated......An attempt has been made in this paper to arrive at the safety factor design of glass fibre reinforced polymer (GRP) composite products using graph theoretic model. In the conventional design and recommendations of the standards, these design factors affecting properties have been considered...

Survey of factors associated with nurses' perception of patient safety.

Science.gov (United States)

Park, Sun A; Lee, Sui Jin; Choi, Go Un

2011-01-01

To describe the nurses' perception of hospital organization related to cultural issues on the safety of the patient and reporting medical errors. In addition, to identify factors associated with the safety of the patient and the nurse. A survey conducted during December 2008-Jannuary 2009, with 126 nurses using the Korean version of the AHRQ patient safety survey, a self-report 5-point Likert scale. Stata 10.0 was used for descriptive analysis, ANOVA (Analysis of variance) and logistic regression. National Cancer Center in Korea. The means for a working environment related to patient safety was 3.4 (±0.62). The associated factors of duration were at a present hospital, a special area, and direct contact with patients. Among organizational culture factors related to patient safety, the means were 3.81(±0.54) for the boss/manager's perception of patient safety and 3.37(±0.49) for the cooperation/collaboration between units. The frequent number of errors reported by nurses were 1~2(22.2%) times over the past 12 months. For incidence reporting, the items that the 'nurses perceived for communication among clinicians as fair' had a means of 3.23(±0.40) and the 'overall evaluation of patient safety was a good' 3.34(±0.73). The nurses' perception of cooperation and collaboration between units were associated with the direct contact between the patient and the nurse. The frequency of incidence reporting was associated with the duration of working hours at the present hospital and also their work experience. The nurses' perception of hospital environment, organizational culture, and incidence reporting was above average and mostly associated with organizational culture.

A cross-cultural study of organizational factors on safety: Japanese vs. Taiwanese oil refinery plants.

Science.gov (United States)

Hsu, Shang Hwa; Lee, Chun-Chia; Wu, Muh-Cherng; Takano, Kenichi

2008-01-01

This study attempts to identify idiosyncrasies of organizational factors on safety and their influence mechanisms in Taiwan and Japan. Data were collected from employees of Taiwanese and Japanese oil refinery plants. Results show that organizational factors on safety differ in the two countries. Organizational characteristics in Taiwanese plants are highlighted as: higher level of management commitment to safety, harmonious interpersonal relationship, more emphasis on safety activities, higher devotion to supervision, and higher safety self-efficacy, as well as high quality of safety performance. Organizational characteristics in Japanese plants are highlighted as: higher level of employee empowerment and attitude towards continuous improvement, more emphasis on systematic safety management approach, efficient reporting system and teamwork, and high quality of safety performance. The casual relationships between organizational factors and workers' safety performance were investigated using structural equation modeling (SEM). Results indicate that the influence mechanisms of organizational factors in Taiwan and Japan are different. These findings provide insights into areas of safety improvement in emerging countries and developed countries respectively.

Factor Analysis and Framework Development for Incorporating Public Trust on Nuclear Safety issues

Energy Technology Data Exchange (ETDEWEB)

Cho, Seongkyung; Lee, Gyebong [The Myongji Univ., Seoul (Korea, Republic of); Lee, Gihyung; Lee, Gyehwi; Jeong, Jina [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2014-05-15

The Korea Institute of Nuclear Safety (KINS), a regulatory expert organization in charge of nuclear safety in Korea, realized that a more fundamental and systematic analysis of activities is needed to actively meet the greater variety of concerns people have and increase the reliability of the results of regulation. Nuclear safety, a highly specialized field, has previously been discussed primarily from the viewpoint of the engineers who deal with the technology, but now 'public trust in nuclear safety' has to be viewed from the standpoint of the general public and from the socio-cultural perspective. Specific measures must be taken to examine which factors affect public trust and how we can secure and reproduce those factors to gain it. Also, an efficient system for incorporating public trust in nuclear safety must be established. In this study, various case studies were examined to identify the factors that affect public trust in nuclear safety. First, nuclear safety laws and information disclosure systems of major countries were examined by investigating data and conducting in-depth interviews. To explore a public framework concerning nuclear safety, big data of social media were analyzed. Also, Q methodology was used to analyze the risk schemata of the opinion leaders living in areas near nuclear power plants. Several surveys were conducted to analyze the amount of trust the public had in nuclear safety as well as their awareness of nuclear safety issues. Based on these analyses, factors affecting public trust in nuclear safety were extracted, and measures to build systems incorporating public trust in nuclear safety were proposed. This study addresses the public trust in nuclear safety on condition that the safety is ensured technically and mechanically.

Factor Analysis and Framework Development for Incorporating Public Trust on Nuclear Safety issues

International Nuclear Information System (INIS)

Cho, Seongkyung; Lee, Gyebong; Lee, Gihyung; Lee, Gyehwi; Jeong, Jina

2014-01-01

The Korea Institute of Nuclear Safety (KINS), a regulatory expert organization in charge of nuclear safety in Korea, realized that a more fundamental and systematic analysis of activities is needed to actively meet the greater variety of concerns people have and increase the reliability of the results of regulation. Nuclear safety, a highly specialized field, has previously been discussed primarily from the viewpoint of the engineers who deal with the technology, but now 'public trust in nuclear safety' has to be viewed from the standpoint of the general public and from the socio-cultural perspective. Specific measures must be taken to examine which factors affect public trust and how we can secure and reproduce those factors to gain it. Also, an efficient system for incorporating public trust in nuclear safety must be established. In this study, various case studies were examined to identify the factors that affect public trust in nuclear safety. First, nuclear safety laws and information disclosure systems of major countries were examined by investigating data and conducting in-depth interviews. To explore a public framework concerning nuclear safety, big data of social media were analyzed. Also, Q methodology was used to analyze the risk schemata of the opinion leaders living in areas near nuclear power plants. Several surveys were conducted to analyze the amount of trust the public had in nuclear safety as well as their awareness of nuclear safety issues. Based on these analyses, factors affecting public trust in nuclear safety were extracted, and measures to build systems incorporating public trust in nuclear safety were proposed. This study addresses the public trust in nuclear safety on condition that the safety is ensured technically and mechanically

Factors associated with the enactment of safety belt and motorcycle helmet laws.

Science.gov (United States)

Law, Teik Hua; Noland, Robert B; Evans, Andrew W

2013-07-01

It has been shown that road safety laws, such as motorcycle helmet and safety belt laws, have a significant effect in reducing road fatalities. Although an expanding body of literature has documented the effects of these laws on road safety, it remains unclear which factors influence the likelihood that these laws are enacted. This study attempts to identify the factors that influence the decision to enact safety belt and motorcycle helmet laws. Using panel data from 31 countries between 1963 and 2002, our results reveal that increased democracy, education level, per capita income, political stability, and more equitable income distribution within a country are associated with the enactment of road safety laws. © 2012 Society for Risk Analysis.

Toxicity and Safety Profiles of Methanolic Extract of Pistacia integerrima J. L. Stewart ex Brandis (PI for Wistar Rats

Directory of Open Access Journals (Sweden)

Gotmi Sharwan

2016-09-01

Full Text Available Objectives: The goals of this research were to evaluate acute (single-dose and sub-acute (repeated-dose toxicity profiles of methanolic extract of Pistacia integerrima J. L. Stewart ex Brandis (PI for Wistar rats and to assess the safety profile of PI by observing physiological changes, mortality, changes in body weight

A Study on the Holding Capacity Safety Factors for Torpedo Anchors

Directory of Open Access Journals (Sweden)

Luís V. S. Sagrilo

2012-01-01

Full Text Available The use of powerful numerical tools based on the finite-element method has been improving the prediction of the holding capacity of fixed anchors employed by the offshore oil industry. One of the main achievements of these tools is the reduction of the uncertainty related to the holding capacity calculation of these anchors. Therefore, it is also possible to reduce the values of the associated design safety factors, which have been calibrated relying on models with higher uncertainty, without impairing the original level of structural safety. This paper presents a study on the calibration of reliability-based safety factors for the design of torpedo anchors considering the statistical model uncertainty evaluated using results from experimental tests and their correspondent finite-element-based numerical predictions. Both working stress design (WSD and load and resistance factors design (LRFD design methodologies are investigated. Considering the WSD design methodology, the single safety is considerably lower than the value typically employed in the design of torpedo anchors. Moreover, a LRFD design code format for torpedo anchors is more appropriate since it leads to designs having less-scattered safety levels around the target value.

A quantitative assessment of organizational factors affecting safety using a system dynamics model

International Nuclear Information System (INIS)

Yoo, J. K.; Yoon, T. S.

2003-01-01

The purpose of this study is to develop a system dynamics model for the assessment of organizational and human factors in the nuclear power plant safety. Previous studies are classified into two major approaches. One is the engineering approach such as ergonomics and Probabilistic Safety Assessment (PSA). The other is socio-psychology one. Both have contributed to find organizational and human factors and increased nuclear safety However, since these approaches assume that the relationship among factors is independent they do not explain the interactions between factors or variables in NPP's. To overcome these restrictions, a system dynamics model, which can show causal relations between factors and quantify organizational and human factors, has been developed. Operating variables such as degree of leadership, adjustment of number of employee, and workload in each department, users can simulate various situations in nuclear power plants in the organization side. Through simulation, user can get an insight to improve safety in plants and to find managerial tools in the organization and human side

Safety profile of the 9-valent HPV vaccine

DEFF Research Database (Denmark)

Moreira, Edson D; Block, Stan L; Ferris, Daron G

2016-01-01

OBJECTIVES: The overall safety profile of the 9-valent human papillomavirus (9vHPV) vaccine was evaluated across 7 Phase III studies, conducted in males and females (nonpregnant at entry), 9 to 26 years of age. METHODS: Vaccination was administered as a 3-dose regimen at day 1, and months 2 and 6....... More than 15 000 subjects received ≥1 dose of 9vHPV vaccine. In 2 of the studies, >7000 control subjects received ≥1 dose of quadrivalent HPV (qHPV) vaccine. Serious and nonserious adverse events (AEs) and new medical conditions were recorded throughout the study. Subjects testing positive...... for pregnancy at day 1 were not vaccinated; those who became pregnant after day 1 were discontinued from further vaccination until resolution of the pregnancy. Pregnancies detected after study start (n = 2950) were followed to outcome. RESULTS: The most common AEs (≥5%) experienced by 9vHPV vaccine recipients...

Patient safety in the operating room: an intervention study on latent risk factors

Directory of Open Access Journals (Sweden)

van Beuzekom Martie

2012-06-01

Full Text Available Abstract Background Patient safety is one of the greatest challenges in healthcare. In the operating room errors are frequent and often consequential. This article describes an approach to a successful implementation of a patient safety program in the operating room, focussing on latent risk factors that influence patient safety. We performed an intervention to improve these latent risk factors (LRFs and increase awareness of patient safety issues amongst OR staff. Methods Latent risk factors were studied using a validated questionnaire applied to the OR staff before and after an intervention. A pre-test/post-test control group design with repeated measures was used to evaluate the effects of the interventions. The staff from one operating room of an university hospital acted as the intervention group. Controls consisted of the staff of the operating room in another university hospital. The outcomes were the changes in LRF scores, perceived incident rate, and changes in incident reports between pre- and post-intervention. Results Based on pre-test scores and participants’ key concerns about organizational factors affecting patient safety in their department the intervention focused on the following LRFs: Material Resources, Training and Staffing Recourses. After the intervention, the intervention operating room - compared to the control operating room - reported significantly fewer problems on Material Resources and Staffing Resources and a significantly lower score on perceived incident rate. The contribution of technical factors to incident causation decreased significantly in the intervention group after the intervention. Conclusion The change of state of latent risk factors can be measured using a patient safety questionnaire aimed at these factors. The change of the relevant risk factors (Material and Staffing resources concurred with a decrease in perceived and reported incident rates in the relevant categories. We conclude that

Consensus achievement of leadership, organisational and individual factors that influence safety climate: Implications for nursing management.

Science.gov (United States)

Fischer, Shelly A; Jones, Jacqueline; Verran, Joyce A

2018-01-01

To validate a framework of factors that influence the relationship of transformational leadership and safety climate, and to enable testing of safety chain factors by generating hypotheses regarding their mediating and moderating effects. Understanding the patient safety chain and mechanisms by which leaders affect a strong climate of safety is essential to transformational leadership practice, education, and research. A systematic review of leadership and safety literature was used to develop an organising framework of factors proposed to influence the climate of safety. A panel of 25 international experts in leadership and safety engaged a three-round modified Delphi study with Likert-scored surveys. Eighty per cent of participating experts from six countries were retained to the final survey round. Consensus (>66% agreement) was achieved on 40 factors believed to influence safety climate in the acute care setting. Consensus regarding specific factors that play important roles in an organisation's climate of safety can be reached. Generally, the demonstration of leadership commitment to safety is key to cultivating a culture of patient safety. Transformational nurse leaders should consider and employ all three categories of factors in daily leadership activities and decision-making to drive a strong climate of patient safety. © 2017 John Wiley & Sons Ltd.

Input-profile-based software failure probability quantification for safety signal generation systems

International Nuclear Information System (INIS)

Kang, Hyun Gook; Lim, Ho Gon; Lee, Ho Jung; Kim, Man Cheol; Jang, Seung Cheol

2009-01-01

The approaches for software failure probability estimation are mainly based on the results of testing. Test cases represent the inputs, which are encountered in an actual use. The test inputs for the safety-critical application such as a reactor protection system (RPS) of a nuclear power plant are the inputs which cause the activation of protective action such as a reactor trip. A digital system treats inputs from instrumentation sensors as discrete digital values by using an analog-to-digital converter. Input profile must be determined in consideration of these characteristics for effective software failure probability quantification. Another important characteristic of software testing is that we do not have to repeat the test for the same input value since the software response is deterministic for each specific digital input. With these considerations, we propose an effective software testing method for quantifying the failure probability. As an example application, the input profile of the digital RPS is developed based on the typical plant data. The proposed method in this study is expected to provide a simple but realistic mean to quantify the software failure probability based on input profile and system dynamics.

Effects of the safety factor on ion temperature gradient modes

International Nuclear Information System (INIS)

Wang, A.K.; Dong, J.Q.; Sanuki, H.; Itoh, K.

2003-01-01

A model for the ion temperature gradient (ITG) driven instability is derived from Braginskii magnetohydrodynamic equations of ions. The safety factor q in a toroidal plasma is introduced into the model through the current density J parallel . The effects of q or J parallel on both the ITG instability in k perpendicular and k parallel spectra and the critical stability thresholds are studied. It is shown that the current density // J or the safety factor q plays an important role in stabilizing the ITG instability. (author)

Relationship between organizational factors, safety culture and PSA in nuclear power plant operations

International Nuclear Information System (INIS)

Joksimovich, V.; Orvis, D.D.

1997-01-01

There are four nuclear safety imperatives or ''4Ms'': machine (hardware, design, QA/QC), milieux (operating conditions, environment, natural phenomena), man (human reliability) and management (organizational and management influences). Nuclear safety evaluations as well as evolution of its most powerful tool, Probabilistic Safety Assessment (PSA), followed chronologically the 4M constituents. The nuclear industry worldwide, and the nuclear safety regulators in particular, have been preoccupied with the first M almost to the point of obsession with belated and only intuitive interest in the third and fourth M (human dimension). Human factors or economics in the nuclear industry was an afterthought. Human reliability was essentially born in the aftermath of the Three Mile Island (TMI) accident. Impact of organizational factors on nuclear safety is only in the early stages of R and D. This paper describes some of the concepts being pursued by APG to link organizational factors and safety culture to Human Reliability Analysis (HRA) and to integrate such into probabilistic safety assessment (PSA), e.g. [APG, 1993]. (author). 11 refs, 4 figs, 1 tab

Survival-related profile, pathways, and transcription factors in ovarian cancer.

Directory of Open Access Journals (Sweden)

Anne P G Crijns

2009-02-01

Full Text Available BACKGROUND: Ovarian cancer has a poor prognosis due to advanced stage at presentation and either intrinsic or acquired resistance to classic cytotoxic drugs such as platinum and taxoids. Recent large clinical trials with different combinations and sequences of classic cytotoxic drugs indicate that further significant improvement in prognosis by this type of drugs is not to be expected. Currently a large number of drugs, targeting dysregulated molecular pathways in cancer cells have been developed and are introduced in the clinic. A major challenge is to identify those patients who will benefit from drugs targeting these specific dysregulated pathways.The aims of our study were (1 to develop a gene expression profile associated with overall survival in advanced stage serous ovarian cancer, (2 to assess the association of pathways and transcription factors with overall survival, and (3 to validate our identified profile and pathways/transcription factors in an independent set of ovarian cancers. METHODS AND FINDINGS: According to a randomized design, profiling of 157 advanced stage serous ovarian cancers was performed in duplicate using approximately 35,000 70-mer oligonucleotide microarrays. A continuous predictor of overall survival was built taking into account well-known issues in microarray analysis, such as multiple testing and overfitting. A functional class scoring analysis was utilized to assess pathways/transcription factors for their association with overall survival. The prognostic value of genes that constitute our overall survival profile was validated on a fully independent, publicly available dataset of 118 well-defined primary serous ovarian cancers. Furthermore, functional class scoring analysis was also performed on this independent dataset to assess the similarities with results from our own dataset. An 86-gene overall survival profile discriminated between patients with unfavorable and favorable prognosis (median survival, 19

Systematic review: cardiovascular safety profile of 5-HT4 agonists developed for gastrointestinal disorders

OpenAIRE

Tack, J; Camilleri, M; Chang, L; Chey, W D; Galligan, J J; Lacy, B E; Müller-Lissner, S; Quigley, E M M; Schuurkes, J; Maeyer, J H; Stanghellini, V

2012-01-01

Summary Background The nonselective 5-HT4 receptor agonists, cisapride and tegaserod have been associated with cardiovascular adverse events (AEs). Aim To perform a systematic review of the safety profile, particularly cardiovascular, of 5-HT4 agonists developed for gastrointestinal disorders, and a nonsystematic summary of their pharmacology and clinical efficacy. Methods Articles reporting data on cisapride, clebopride, prucalopride, mosapride, renzapride, tegaserod, TD-5108 (velusetrag) an...

Safety climate in university and college laboratories: impact of organizational and individual factors.

Science.gov (United States)

Wu, Tsung-Chih; Liu, Chi-Wei; Lu, Mu-Chen

2007-01-01

Universities and colleges serve to be institutions of education excellence; however, problems in the areas of occupational safety may undermine such goals. Occupational safety must be the concern of every employee in the organization, regardless of job position. Safety climate surveys have been suggested as important tools for measuring the effectiveness and improvement direction of safety programs. Thus, this study aims to investigate the influence of organizational and individual factors on safety climate in university and college laboratories. Employees at 100 universities and colleges in Taiwan were mailed a self-administered questionnaire survey; the response rate was 78%. Multivariate analysis of variance revealed that organizational category of ownership, the presence of a safety manager and safety committee, gender, age, title, accident experience, and safety training significantly affected the climate. Among them, accident experience and safety training affected the climate with practical significance. The authors recommend that managers should address important factors affecting safety issues and then create a positive climate by enforcing continuous improvements.

A report on human factors in nuclear safety

International Nuclear Information System (INIS)

1983-03-01

Following the Three Mile Island incident of 1979, studies were undertaken by the Atomic Energy Control Board (AECB), in-house and through outside consultants, to address the role of human factors in the regulatory process. This report by the Advisory Committee on Nuclear Safety (ACNS) comments briefly on these studies and offers suggestions which would promote a more formal treatment of human factors by the AECB

Classification analysis of organization factors related to system safety

International Nuclear Information System (INIS)

Liu Huizhen; Zhang Li; Zhang Yuling; Guan Shihua

2009-01-01

This paper analyzes the different types of organization factors which influence the system safety. The organization factor can be divided into the interior organization factor and exterior organization factor. The latter includes the factors of political, economical, technical, law, social culture and geographical, and the relationships among different interest groups. The former includes organization culture, communication, decision, training, process, supervision and management and organization structure. This paper focuses on the description of the organization factors. The classification analysis of the organization factors is the early work of quantitative analysis. (authors)

Mathematical models for prediction of safety factors for a simply ...

African Journals Online (AJOL)

From the results obtained, mathematical prediction models were developed using a least square regression analysis for bending, shear and deflection modes of failure considered in the study. The results showed that the safety factors for material, dead and live load are not unique, but they are influenced by safety index ...

A quantitative assessment of organizational factors affecting safety using a system dynamics model

Energy Technology Data Exchange (ETDEWEB)

Yoo, J. K. [Systemix Company, Seoul (Korea, Republic of); Yoon, T. S. [Korea Electric Power Research Institute (Korea, Republic of)

2003-07-01

The purpose of this study is to develop a system dynamics model for the assessment of organizational and human factors in the nuclear power plant safety. Previous studies are classified into two major approaches. One is the engineering approach such as ergonomics and Probabilistic Safety Assessment (PSA). The other is socio-psychology one. Both have contributed to find organizational and human factors and increased nuclear safety However, since these approaches assume that the relationship among factors is independent they do not explain the interactions between factors or variables in NPP's. To overcome these restrictions, a system dynamics model, which can show causal relations between factors and quantify organizational and human factors, has been developed. Operating variables such as degree of leadership, adjustment of number of employee, and workload in each department, users can simulate various situations in nuclear power plants in the organization side. Through simulation, user can get an insight to improve safety in plants and to find managerial tools in the organization and human side.

Safety of Abiraterone Acetate in Castration-resistant Prostate Cancer Patients With Concomitant Cardiovascular Risk Factors.

Science.gov (United States)

Procopio, Giuseppe; Grassi, Paolo; Testa, Isabella; Verzoni, Elena; Torri, Valter; Salvioni, Roberto; Valdagni, Riccardo; de Braud, Filippo

2015-10-01

The aim of this study was to evaluate the safety profile of abiraterone acetate (AA) in metastatic castration-resistant prostate cancer (mCRPC) men with cardiovascular comorbidity, as little conclusive safety data are available in this patient subset. A retrospective analysis of mCRPC patients with controlled cardiovascular comorbidities, receiving AA 1000 mg administered orally once daily and prednisone 5 mg twice daily, between April 2011 and July 2012, was performed. All clinical and instrumental variables and toxicity data were analyzed by descriptive statistics: mean, standard deviation, minimum and maximum values for continuous variables, and absolute and relative frequencies for categorical variables. A total of 51 mCRPC patients were evaluated. Metastatic sites included the bone (74%), lungs, and liver (26%). All patients were previously treated with at least 2 lines of hormone and 1 docetaxel-based chemotherapy. Preexisting cardiac risk factors included hypertension (41%), cardiac ischemia (12%), arrhythmias (6%), dislipidemia (18%), and hyperglycemia (30%). No grade 3-4 adverse events were observed. Grade 1-2 adverse events included fluid retention (18%), asthenia (15%), and hypertension (16%). Median progression-free survival was 5.1 months (95% confidence interval, 0.5-12). Prostate specific antigen assessment revealed a good overall disease control rate (64%). AA appears to be safe and well tolerated even in patients with cardiovascular comorbidities or with increased risk factors for cardiovascular diseases.

Organizational factors and nuclear power plant safety

International Nuclear Information System (INIS)

Haber, S.B.

1995-01-01

There are many organizations in our society that depend on human performance to avoid incidents involving significant adverse consequences. As our culture and technology have become more sophisticated, the management of risk on a broad basis has become more and more critical. The safe operation of military facilities, chemical plants, airlines, and mass transit, to name a few, are substantially dependent on the performance of the organizations that operate those facilities. The nuclear power industry has, within the past 15 years, increased the attention given to the influence of human performance in the safe operation of nuclear power plants (NPP). While NPPs have been designed through engineering disciplines to intercept and mitigate events that could cause adverse consequences, it has been clear from various safety-related incidents that human performance also plays a dominant role in preventing accidents. Initial efforts following the 1979 Three Mile Island incident focused primarily on ergonomic factors (e.g., the best design of control rooms for maximum performance). Greater attention was subsequently directed towards cognitive processes involved in the use of NPP decision support systems and decision making in general, personnel functions such as selection systems, and the influence of work scheduling and planning on employees' performance. Although each of these approaches has contributed to increasing the safety of NPPS, during the last few years, there has been a growing awareness that particular attention must be paid to how organizational processes affect NPP personnel performance, and thus, plant safety. The direct importance of organizational factors on safety performance in the NPP has been well-documented in the reports on the Three Mile Island and Chernobyl accidents as well as numerous other events, especially as evaluated by the U.S. Nuclear Regulatory Commission (NRC)

Safety review for human factors engineering and control rooms of nuclear power plants

International Nuclear Information System (INIS)

Yang Mengzhuo

1998-01-01

Safety review for human factors engineering and control rooms of nuclear power plants (NPP) is in a forward position of science and technology, which began at American TMI severe accident and had been implemented in China. The importance and the significance of the safety review are expounded, the requirements of its scope and profundity are explained in detail. In addition, the situation of the technical document system for nuclear safety regulation on human factors engineering and control rooms of NPP in China is introduced briefly, on which the safety review is based

A Study on the Allowable Safety Factor of Cut-Slopes for Nuclear Facilities

Energy Technology Data Exchange (ETDEWEB)

Kim, Myung Soo; Yee, Eric [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

2015-10-15

In this study, the issues of allowable safety factor design criteria for cut-slopes in nuclear facilities is derived through case analysis, a proposed construction work slope design criteria that provides relatively detailed conditions can be applied in case of the dry season and some unclear parts of slope design criteria be modified in case of the rainy season. This safety factor can be further subdivided into two; normal and earthquake factors, a factor of 1.5 is applied for normal conditions and a factor of 1.2 is applied for seismic conditions. This safety factor takes into consideration the effect of ground water and rainfall conditions. However, no criteria for the case of cut-slope in nuclear facilities and its response to seismic conditions is clearly defined, this can cause uncertainty in design. Therefore, this paper investigates the allowable safety factor for cut-slopes in nuclear facilities, reviews conditions of both local and international cut-slope models and finally suggests an alternative method of analysis. It is expected that the new design criteria adequately ensures the stability of the cut-slope to reflect clear conditions for both the supervising and design engineers.

75 FR 5536 - Pipeline Safety: Control Room Management/Human Factors, Correction

Science.gov (United States)

2010-02-03

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Parts...: Control Room Management/Human Factors, Correction AGENCY: Pipeline and Hazardous Materials Safety... following correcting amendments: PART 192--TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM...

Development of safety factors to be used for evaluation of cracked nuclear components

International Nuclear Information System (INIS)

Brickstad, B.; Bergman, M.

1996-10-01

A modified concept for safety evaluation is introduced which separately accounts for the failure mechanisms fracture and plastic collapse. For application on nuclear components a set of safety factors are also proposed that retain the safety margins expressed in ASME, section III and XI. By performing comparative studies of the acceptance levels for surface cracks in pipes and a pressure vessel, it is shown that some of the anomalies connected with the old safety procedures are removed. It is the authors belief that the outlined safety evaluation procedure has the capability of treating cracks in a consistent way and that the procedure together with the proposed safety factors fulfill the basic safety requirements for nuclear components. Hopefully, it is possible in the near future to develop a probabilistic safety assessment procedure in Sweden, which enables a systematic treatment of uncertainties in the involved data. 14 refs

Functionality of road safety devices – identification and analysis of factors

Directory of Open Access Journals (Sweden)

Jeliński Łukasz

2017-01-01

Full Text Available Road safety devices are designed to protect road users from the risk of injury or death. The principal type of restraint is the safety barrier. Deployed on sites with the highest risk of run-off-road accidents, safety barriers are mostly found on bridges, flyovers, central reservations, and on road edges which have fixed obstacles next to them. If properly designed and installed, safety barriers just as other road safety devices, should meet a number of functional features. This report analyses factors which may deteriorate functionality, ways to prevent this from happening and the thresholds for loss of road safety device functionality.

Risk Factor Profile in Parkinson's Disease Subtype with REM Sleep Behavior Disorder.

Science.gov (United States)

Jacobs, Marie L; Dauvilliers, Yves; St Louis, Erik K; McCarter, Stuart J; Romenets, Silvia Rios; Pelletier, Amélie; Cherif, Mahmoud; Gagnon, Jean-François; Postuma, Ronald B

2016-01-01

Numerous large-scale studies have found diverse risk factors for Parkinson's disease (PD), including caffeine non-use, non-smoking, head injury, pesticide exposure, and family history. These studies assessed risk factors for PD overall; however, PD is a heterogeneous condition. One of the strongest identifiers of prognosis and disease subtype is the co-occurrence of rapid eye movement sleep behavior disorder (RBD).In previous studies, idiopathic RBD was associated with a different risk factor profile from PD and dementia with Lewy bodies, suggesting that the PD-RBD subtype may also have a different risk factor profile. To define risk factors for PD in patients with or without associated RBD. In a questionnaire, we assessed risk factors for PD, including demographic, medical, environmental, and lifestyle variables of 189 PD patients with or without associated polysomnography-confirmed RBD. The risk profile of patients with vs. without RBD was assessed with logistic regression, adjusting for age, sex, and disease duration. PD-RBD patients were more likely to have been a welder (OR = 3.11 (1.05-9.223), and to have been regular smokers (OR = 1.96 (1.04-3.68)). There were no differences in use of caffeine or alcohol, other occupations, pesticide exposure, rural living, or well water use. Patients with RBD had a higher prevalence of the combined family history of both dementia and parkinsonism (13.3% vs. 5.5% , OR = 3.28 (1.07-10.0). The RBD-specific subtype of PD may also have a different risk factor profile.

Requirements to amend the main influence factors on the safety culture after fukushima accident

International Nuclear Information System (INIS)

Farcasiu, M.; Nitoi, M.

2015-01-01

The paper presents a general model that provides a framework for the safety culture assessment, creating the possibility to identify factors that can significantly influence the safety culture. The main safety culture influence factors (SCIF) used by model are the following: regulatory environment, organizational environment, worker characteristics, socio-political environment, national culture, organization history, business and technological characteristics. After the analysis of the deficiencies and weaknesses of SCIFc in evolution of the Fukushima accident, some issues that may become necessities and requirements to change and improve both the safety culture and safety of the nuclear installations were highlighted. For each influence factor were identified some requirements to amend. The results will emphasize the necesity of the human - technology - organization system assessment. Hence it was demonstrated that the safety culture results from the interaction of individuals with technology and with the organization. (authors)

Research on review technology for three key safety factors of periodic safety review (PSR) and its application to Qinshan Nuclear Power Plant

International Nuclear Information System (INIS)

Xu Shoulv; Yao Weida; Dou Yikang; Lin Shaoxuan; Cao Yenan; Zhou Quanfu; Zheng Jiong; Zhang Ming

2009-04-01

In 2001, after 10 years' operation, Qinshan Nuclear Power Plant (Q1) started to carry out periodic safety review (PSR) based on a nuclear safety guideline, Periodic Safety Review for Operational Nuclear Power Plants (HAF0312), issued by National Nuclear Safety Administration of China (NNSA). Entrusted by the owner of Q1, Shanghai Nuclear Engineering Research and Design Institute (SNERDI) implemented reviews of three key safety factors including safety analysis, equipment qualification and ageing. PSR was a challenging work in China at that time and through three years' research and practice, SNERDI summarized a systematic achievement for the review including review methodology, scoping, review contents and implementation steps, etc.. During the process of review for the three safety factors, totally 148 review reports and 341 recommendations for corrections were submitted to Q1. These reports and recommendations have provided guidance for correction actions as follow-up of PSR. This paper focuses on technical aspects to carry out PSR for the above-mentioned three safety factors, including review scoping, contents, methodology and main steps. The review technology and relevant experience can be taken for reference for other NPPs to carry out PSR. (authors)

Modeling the factors affecting unsafe behavior in the construction industry from safety supervisors' perspective.

Science.gov (United States)

Khosravi, Yahya; Asilian-Mahabadi, Hassan; Hajizadeh, Ebrahim; Hassanzadeh-Rangi, Narmin; Bastani, Hamid; Khavanin, Ali; Mortazavi, Seyed Bagher

2014-01-01

There can be little doubt that the construction is the most hazardous industry in the worldwide. This study was designed to modeling the factors affecting unsafe behavior from the perspective of safety supervisors. The qualitative research was conducted to extract a conceptual model. A structural model was then developed based on a questionnaire survey (n=266) by two stage Structural Equation Model (SEM) approach. An excellent confirmed 12-factors structure explained about 62% of variances unsafe behavior in the construction industry. A good fit structural model indicated that safety climate factors were positively correlated with safety individual factors (Pconstruction workers' engagement in safe or unsafe behavior. In order to improve construction safety performance, more focus on the workplace condition is required.

Human and organization factors: engineering operating safety into offshore structures

International Nuclear Information System (INIS)

Bea, Robert G.

1998-01-01

History indicates clearly that the safety of offshore structures is determined primarily by the humans and organizations responsible for these structures during their design, construction, operation, maintenance, and decommissioning. If the safety of offshore structures is to be preserved and improved, then attention of engineers should focus on to how to improve the reliability of the offshore structure 'system,' including the people that come into contact with the structure during its life-cycle. This article reviews and discusss concepts and engineering approaches that can be used in such efforts. Two specific human factor issues are addressed: (1) real-time management of safety during operations, and (2) development of a Safety Management Assessment System to help improve the safety of offshore structures

Influence of organizational factors on safety

International Nuclear Information System (INIS)

Haber, S.B.; Metlay, D.S.; Crouch, D.A.

1990-01-01

There is a need for a better understanding of exactly how organizational management factors at a nuclear power plant (NPP) affect plant safety performance, either directly or indirectly, and how these factors might be observed, measured, and evaluated. The purpose of this research project is to respond to that need by developing a general methodology for characterizing these organizational and management factors, systematically collecting information on their status and integrating that information into various types of evaluative activities. Research to date has included the development of the Nuclear Organization and Management Analysis Concept (NOMAC) of a NPP, the identification of key organizational and management factors, and the identification of the methods for systematically measuring and analyzing the influence of these factors on performance. Most recently, two field studies, one at a fossil fuel plant and the other at a NPP, were conducted using the developed methodology. Results are presented from both studies highlighting the acceptability, practicality, and usefulness of the methods used to assess the influence of various organizational and management factors including culture, communication, decision-making, standardization, and oversight. 6 refs., 3 figs., 1 tab

The Relationship Between Antecedent and Consequence Factors with Safety Behaviour in PT.X

OpenAIRE

Fitriani, Apris; Nawawiwetu, Erwin Dyah

2017-01-01

Background : Safety behaviour is an act worker to minimize the possibility of accidents in workplace. Based on the Antecedents-Behaviour-Consequence (ABC) theory, safety behaviour of worker related with the antecedent and consequence factors. Purpose : The purpose of this research was to study the association between antecedent and consequence factors with safety behaviour of workers in Ring Frame Unit Spinning II PT. X. Methods : This was an observational descriptive research with cross sect...

A research framework of organizational factors on safety in the Republic of Korea

International Nuclear Information System (INIS)

Kwang Seok Lee

1997-01-01

Korean nuclear society is yet unfamiliar with the topic, 'organizational factors on safety', while having shown lots of accomplishments in the area of physical and human factors on safety. However, recent large-scale accidents in other technological areas illustrate the importance of managing organization factors on safety. Recently Korea Atomic Energy Research Institute (KAERI) started paying attention to this topic and is trying to establish a future research framework of organizational factors on safety. This paper tries to explain overall direction of the framework. Our framework, as managing organizational factors on safety, considers two kinds of areas: design of management systems, which implies a feed-forward system including organizational models; and operation of those systems, which implies a feedback system including management information and implementation systems. Our framework also considers the evolution stage of a management system. Management systems evolve from visibility stage to optimization stage. To optimize a management system, we should be able to control the system. To control the system, we should be able to see how the system is going. In addition, this paper tries to share some experience of KAERI on how organizational structure and culture affects organizational performance in R and D perspective. (author). 2 refs, 1 fig

Anxiety and Mood Clinical Profile following Sport-related Concussion: From Risk Factors to Treatment.

Science.gov (United States)

Sandel, Natalie; Reynolds, Erin; Cohen, Paul E; Gillie, Brandon L; Kontos, Anthony P

2017-08-01

Conceptual models for assessing and treating sport-related concussion (SRC) have evolved from a homogenous approach to include different clinical profiles that reflect the heterogeneous nature of this injury and its effects. There are six identified clinical profiles, or subtypes from SRC, and one such clinical profile is the anxiety/mood profile. Athletes with this profile experience predominant emotional disturbance and anxiety following SRC. The purpose of this targeted review was to present an overview of the empirical evidence to support factors contributing to the anxiety/mood profile, along with methods of evaluation and treatment of this clinical profile following SRC. We discuss the potential underlying mechanisms and risk factors for this clinical profile, describe comprehensive assessments to evaluate concussed athletes with an anxiety/mood clinical profile, and explore behavioral and other interventions for treating these athletes. Although there is limited, but growing empirical evidence for the anxiety/mood clinical profile following SRC, understanding this clinical profile is germane for clinicians who are treating athletes with emotional sequelae after SRC.

Human and organizational factors in nuclear safety

International Nuclear Information System (INIS)

Garcia, A.; Barrientos, M.; Gil, B.

2015-01-01

Nuclear installations are socio technical systems where human and organizational factors, in both utilities and regulators, have a significant impact on safety. Three Mile Island (TMI) accident, original of several initiatives in the human factors field, nevertheless became a lost opportunity to timely acquire lessons related to the upper tiers of the system. Nowadays, Spanish nuclear installations have integrated in their processes specialists and activities in human and organizational factors, promoted by the licensees After many years of hard work, Spanish installations have achieved a better position to face new challenges, such as those posed by Fukushima. With this experience, only technology-centered action plan would not be acceptable, turning this accident in yet another lost opportunity. (Author)

Risk Factors and Bacterial Profile of Suspected Neonatal ...

African Journals Online (AJOL)

Neonatal septicaemia is a common cause of morbidity and mortality in developing countries and a major health concern. The aim of this study is to evaluate the bacterial profile, antibiotics susceptibility pattern and associated risk factors of suspected septicaemia in neonates in this locality. Five hundred and forty seven ...

Organisational factors. Their definition and influence on nuclear safety. Final report

International Nuclear Information System (INIS)

Baumont, G.; Wahlstroem, B.; Sola, R.; Williams, J.; Frischknecht, A.; Wilpert, B.; Rollenhagen, C.

2000-12-01

The importance of organisational factors in the operational safety and efficiency of nuclear power plants (NPP) has been recognised by many organisations around the world. Despite this recognition, however, there are as yet very few methods by which organisational factors can be systematically assessed and improved. The majority of research efforts applied so far have tended to be modest and scattered. The ORFA project was created as a remedy to these problems. The objective of the project is to create a better understanding of how organisation and management factors influence nuclear safety. A key scientific objective of the project is to identify components of a theoretical framework, which would help in understanding the relationships between organisational factors and nuclear safety. Three work packages were planned. First, a review of literature listed out the identified factors and methods for assessing them. Then, a draft version of the present report was prepared to clarify the environment context and the main issues of the topics. This draft was discussed at the ORFA seminar in Madrid 21-22 October 1999. During the seminar views and comments were collected on preliminary results of the project. Finally, this information has been integrated in the present and other reports and will be used to give further guidance to the European Commission in the development of forthcoming research programmes in the field. The project has addressed nuclear safety taking a broad perspective, which reflected and took into account the views of senior NPP management and regulators. The questions discussed during the project have been: how can organisational factors be included in safety assessments, how can good and bad operational practices be identified, which methods can be used for detecting weak signals of deteriorating performance, how should incidents be analysed with respect to organisational factors to give the largest learning benefit, how can data on organisational

Organizational factors influencing improvements in safety

International Nuclear Information System (INIS)

Marcus, A.; Nichols, M.L.; Olson, J.; Osborn, R.; Thurber, J.

1991-01-01

Results of conceptual and empirical research conducted by this research team, and published in NUREG-CR 5437, suggested that processes of organizational problem solving and learning provide a promising area for understanding improvement in safety-related performance in nuclear power plants. In this paper the authors describe the way in which they have built upon that work and gone much further in empirically examining a range of potentially important organizational factors related to safety. The paper describes (1) overall trends in plant performance over time on the Nuclear Regulatory Commission performance indicators, (2) the major elements in the conceptual framework guiding the current work, which seeks among other things to explain those trends, (3) the specific variables used as measures of the central concepts, (4) the results to date of the quantitative empirical work and qualitative work in progress, and (5) conclusions from the research

Discussion on the Safety Factors of Slopes Recommended for Small Dams

Directory of Open Access Journals (Sweden)

Jan Vrubel

2017-01-01

Full Text Available The design and assessment of the slope stability of small embankment dams is usually not carried out using slope stability calculations but rather by the comparison of proposed or existing dam slopes with those recommended by technical standards or guidelines. Practical experience shows that in many cases the slopes of small dams are steeper than those recommended. However, most of such steeper slopes at existing dams do not exhibit any visible signs of instability, defects or sliding. For the dam owner and also for dam stability engineers, the safety of the slope, expressed e.g. via a factor of safety, is crucial. The aim of this study is to evaluate the safety margin provided by recommended slopes. The factor of safety was evaluated for several dam shape and layout variants via the shear strength reduction method using PLAXIS software. The study covers various dam geometries, dam core and shoulder positions and parameter values of utilised soils. Three load cases were considered: one with a steady state seepage condition and two with different reservoir water level drawdown velocities – standard and critical. As numerous older small dams lack a drainage system, variants with and without a toe drain were assessed. Calculated factors of safety were compared with required values specified by national standards and guidelines.

Identifying the Critical Factors Affecting Safety Program Performance for Construction Projects within Pakistan Construction Industry

Directory of Open Access Journals (Sweden)

Zubair Ahmed Memon

2013-04-01

Full Text Available Many studies have shown that the construction industry one of the most hazardous industries with its high rates of fatalities and injuries and high financial losses incurred through work related accident. To reduce or overcome the safety issues on construction sites, different safety programs are introduced by construction firms. A questionnaire survey study was conducted to highlight the influence of the Construction Safety Factors on safety program implementation. The input from the questionnaire survey was analyzed by using AIM (Average Index Method and rank correlation test was conducted between different groups of respondents to measure the association between different groups of respondent. The finding of this study highlighted that management support is the critical factor for implementing the safety program on projects. From statistical test, it is concluded that all respondent groups were strongly in the favor of management support factor as CSF (Critical Success Factor. The findings of this study were validated on selected case studies. Results of the case studies will help to know the effect of the factors on implementing safety programs during the execution stage.

A quantitative assessment of organizational factors affecting safety using system dynamics model

Energy Technology Data Exchange (ETDEWEB)

Yu, Jae Kook; Ahn, Nam Sung [Korea Electric Power Research Institute, Taejon (Korea, Republic of); Jae, Moo Sung [Hanyang Univ., Seoul (Korea, Republic of)

2004-02-01

The purpose of this study is to develop a system dynamics model for the assessment of the organizational and human factors in a nuclear power plant which contribute to nuclear safety. Previous studies can be classified into two major approaches. One is the engineering approach using tools such as ergonomics and Probability Safety Assessment (PSA). The other is the socio-psychology approach. Both have contributed to find organizational and human factors and to present guidelines to lessen human error in plants. However, since these approaches assume that the relationship among factors is independent they do not explain the interactions among the factors or variables in nuclear power plants. To overcome these restrictions, a system dynamics model, which can show cause and effect relationships among factors and quantify the organizational and human factors, has been developed. Handling variables such as the degree of leadership, the number of employees, and workload in each department, users can simulate various situations in nuclear power plant organization. Through simulation, users can get insights to improve safety in plants and to find managerial tools in both organizational and human factors.

A quantitative assessment of organizational factors affecting safety using system dynamics model

International Nuclear Information System (INIS)

Yu, Jae Kook; Ahn, Nam Sung; Jae, Moo Sung

2004-01-01

The purpose of this study is to develop a system dynamics model for the assessment of the organizational and human factors in a nuclear power plant which contribute to nuclear safety. Previous studies can be classified into two major approaches. One is the engineering approach using tools such as ergonomics and Probability Safety Assessment (PSA). The other is the socio-psychology approach. Both have contributed to find organizational and human factors and to present guidelines to lessen human error in plants. However, since these approaches assume that the relationship among factors is independent they do not explain the interactions among the factors or variables in nuclear power plants. To overcome these restrictions, a system dynamics model, which can show cause and effect relationships among factors and quantify the organizational and human factors, has been developed. Handling variables such as the degree of leadership, the number of employees, and workload in each department, users can simulate various situations in nuclear power plant organization. Through simulation, users can get insights to improve safety in plants and to find managerial tools in both organizational and human factors

Key Factors Affecting Construction Safety Performance in Developing Countries: Evidence from Cambodia

Directory of Open Access Journals (Sweden)

Serdar Durdyev

2017-12-01

Full Text Available Although proper safety management in construction is of utmost importance; anecdotal evidence suggests that safety is not adequately considered in many developing countries. This paper considers the key variables affecting construction safety performance in Cambodia. Using an empirical questionnaire survey targeting local construction professionals, respondents were invited to rate the level of importance of 30 variables identified from the seminal literature. The data set was subjected to factor analysis. Correlations between the variables show that five key factors underlie the challenges facing the local industry; management and organisation, resources, site management, cosmetic and workforce. It is found that the forefront construction professionals (top management and government authorities should take more responsibilities for further improvements in safety performance on project sites. Findings and recommendations of this study may be useful to construction professional who are seeking ways to improve safety records in developing countries.

Nuclear safety and human factors: the French factory of expertise

International Nuclear Information System (INIS)

Rolina, G.

2009-01-01

The French regulation of the nuclear safety is based on the maintaining of a deep technical dialogue between the nuclear safety authority, the I.R.S.N. (Institute of radiation protection and nuclear safety) and the nuclear operators. This type of risk management is called 'french coking' by the Anglo-Saxons, followers of stricter regulatory approach, more readable by the civil society. This technical dialogue is not without quality, especially in the field of human and organizational factors where it allows to improve the know how situation that stays incomplete. (N.C.)

Safer electronic health records safety assurance factors for EHR resilience

CERN Document Server

Sittig, Dean F

2015-01-01

This important volume provide a one-stop resource on the SAFER Guides along with the guides themselves and information on their use, development, and evaluation. The Safety Assurance Factors for EHR Resilience (SAFER) guides, developed by the editors of this book, identify recommended practices to optimize the safety and safe use of electronic health records (EHRs). These guides are designed to help organizations self-assess the safety and effectiveness of their EHR implementations, identify specific areas of vulnerability, and change their cultures and practices to mitigate risks.This book pr

Workers’ Age and the Impact of Psychological Factors on the Perception of Safety at Construction Sites

Directory of Open Access Journals (Sweden)

Muhammad Dawood Idrees

2017-05-01

Full Text Available The safety of construction workers is always a major concern at construction sites as the construction industry is inherently dangerous with many factors influencing worker safety. Several studies concluded that psychological factors such as workload, organizational relationships, mental stress, job security, and job satisfaction have significant effects on workers’ safety. However, research on psychological factors that are characteristic of different age groups have been limited. The aim of this study was to examine the impact of psychological factors on the perception of worker safety for two different age groups. After an extensive literature review, different psychological factors were identified, and a hypothetical research model was developed based on psychological factors that could affect workers’ perception of safety. A survey instrument was developed, and data were collected from seven different construction sites in Pakistan. Structural equation modeling (SEM was employed to test the hypothetical model for both age groups. The results revealed that workload and job satisfaction are significantly dominant factors on workers’ perception of safety in older workers, whereas organizational relationships, mental stress, and job security are dominant factors for younger workers at construction sites.

Five-Factor Model personality profiles of drug users

Directory of Open Access Journals (Sweden)

Crum Rosa M

2008-04-01

Full Text Available Abstract Background Personality traits are considered risk factors for drug use, and, in turn, the psychoactive substances impact individuals' traits. Furthermore, there is increasing interest in developing treatment approaches that match an individual's personality profile. To advance our knowledge of the role of individual differences in drug use, the present study compares the personality profile of tobacco, marijuana, cocaine, and heroin users and non-users using the wide spectrum Five-Factor Model (FFM of personality in a diverse community sample. Method Participants (N = 1,102; mean age = 57 were part of the Epidemiologic Catchment Area (ECA program in Baltimore, MD, USA. The sample was drawn from a community with a wide range of socio-economic conditions. Personality traits were assessed with the Revised NEO Personality Inventory (NEO-PI-R, and psychoactive substance use was assessed with systematic interview. Results Compared to never smokers, current cigarette smokers score lower on Conscientiousness and higher on Neuroticism. Similar, but more extreme, is the profile of cocaine/heroin users, which score very high on Neuroticism, especially Vulnerability, and very low on Conscientiousness, particularly Competence, Achievement-Striving, and Deliberation. By contrast, marijuana users score high on Openness to Experience, average on Neuroticism, but low on Agreeableness and Conscientiousness. Conclusion In addition to confirming high levels of negative affect and impulsive traits, this study highlights the links between drug use and low Conscientiousness. These links provide insight into the etiology of drug use and have implications for public health interventions.

Faraday rotation measurements on JET, and the change in the safety factor profile during a sawtooth collapse

International Nuclear Information System (INIS)

O'Rourke, J.; Lazzaro, E.

1990-01-01

Abel-inversion of Faraday rotation measurements on JET has shown that in the current flat-top of sawtoothing discharges the axial safety factor, q o , remains significantly below unity (0.75±0.15) throughout the sawtooth period. In this paper we address two limitations of the Abel-inversion technique, namely the dependence of the results on the assumed flux surface geometry (especially the elongation of the flux surfaces near the magnetic axis, κ o ) and their lack of sensitivity to small changes in the poloidal magnetic field. Assumptions about the flux surface geometry have been verified by comparing Faraday rotation measurements along nearly orthogonal chords, and by a self-consistent identification of the plasma equilibirum. The sensitivity to small changes in the poloidal field, such as those which occur during sawtooth instabilities, has been increased by Abel-inverting the changes in the Faraday rotation signals rather than the signals themselves. (author) 2 refs., 3 figs

Impact of Geotechnical Factors on the Safety of Low Embankment Dams From the Perspective of Technical and Safety Supervision

Directory of Open Access Journals (Sweden)

Kasana Andrej

2015-03-01

Full Text Available Our research deals with a broad spectrum of problems concerning the variability of geotechnical factors and their influence on the safety of the biggest group of dam constructions in Slovakia, i.e., low earthfill dams. Its specific aim is the observation of their risk factors by using our experience and knowledge gained while working in the sector of technical and safety supervision. To achieve the aims of a research thesis, we analyzed 39 low earthfill dams. We performed observations and documented their conditions with the aim of clarifying the risk factors. After an analysis of the information materials that characterize dams and after a statistical analysis of the measurement results in situ, including measurements from technical and safety supervision databases, we performed an analysis by using mathematical modeling to evaluate the safety of the dam constructions. Out of the total number of 39 dam constructions, an analysis of the stability of the dam slopes was performed on 37 dams, and deformation problems were analyzed on 28 of the dams. Filtration problems were analyzed at 26 dams, and a complete evaluation of the intensity of filtration movements was performed on 19 of the constructions.

Relationships between road safety, safety measures and external factors : a scan of the literature in view of model development and topics for further research.

NARCIS (Netherlands)

Churchill, T. & Norden, Y. van

2010-01-01

The purpose of this literature scan is to examine where literature on the effect of external factors and road safety measures on road safety exists and where it is lacking. This scan will help us to decide which factors to include in a comprehensive road safety model as SWOV is working on, and at

Development of a draft of human factors safety review procedures for the Korean Next Generation Reactor

International Nuclear Information System (INIS)

Lee, Jung Woon; Moon, B. S.; Park, J. C.; Lee, Y. H.; Oh, I. S.; Lee, H. C.

2000-02-01

In this study, a draft of Human Factors Engineering (HFE) Safety Review Procedures (SRP) was developed for the safety review of KNGR based on HFE Safety and Regulatory Requirements and Guidelines (SRRG). This draft includes acceptance criteria, review procedure, and evaluation findings for the areas of review including HFE program management, human factors analyses, human factors design, and HFE verification and validation, based on section 15.1 'human factors engineering design process' and 15.2 'control room human factors engineering' of KNGR specific safety requirements and chapter 15 'human factors engineering' of KNGR safety regulatory guides. For the effective review, human factors concerns or issues related to advanced HSI design that have been reported so far should be extensively examined. In this study, a total of 384 human factors issues related to the advanced HSI design were collected through our review of a total of 145 documents. A summary of each issue was described and the issues were identified by specific features of HSI design. These results were implemented into a database system

The role of engineering judgement, safety culture, and organizational factors in risk assessment

International Nuclear Information System (INIS)

Muzumdar, Ajit; Professor, Visiting

1996-01-01

This paper reviews the role of engineering judgement, safety culture, and organizational factors in risk assessment by examining the reasons for human-based error. The need for more emphasis on producing engineers with good engineering judgement is described. The progress in quantifying the role of safety culture and organizational factors in risk assessment studies is summarized

IRSN-ANCCLI partnership. Organizational and human factors in nuclear safety - April 2014

International Nuclear Information System (INIS)

Jeffroy, Francois; Garron, Joel; Mercel, Philippe; Compagnat, Gilles; Gaucher, Eric; Gaillard, Pierre; Fanchini, Henri; Jacquemont, Vincent

2013-06-01

The contributions (Power Point presentations) of this seminar first address the history of the taking into account of organizational and human factors until the Fukushima accident (history of their taking into account in nuclear safety expertise in France, history of the development of policy of organizational and human factors by an operator). The next contributions discuss the main issues regarding these factors after Fukushima: report by a work-group, work performed by the the Comite d'Orientation sur les Facteurs Sociaux, Organisationnels et Humains (Committee of orientation on social, organizational and human factors). The third session addresses the implication of stakeholders in expertise on these factors: analysis of organizational and human factors by a local information commission or by a CHSCT (committee of hygiene, safety and working conditions)

Patient and carer identified factors which contribute to safety incidents in primary care: a qualitative study.

Science.gov (United States)

Hernan, Andrea L; Giles, Sally J; Fuller, Jeffrey; Johnson, Julie K; Walker, Christine; Dunbar, James A

2015-09-01

Patients can have an important role in reducing harm in primary-care settings. Learning from patient experience and feedback could improve patient safety. Evidence that captures patients' views of the various contributory factors to creating safe primary care is largely absent. The aim of this study was to address this evidence gap. Four focus groups and eight semistructured interviews were conducted with 34 patients and carers from south-east Australia. Participants were asked to describe their experiences of primary care. Audio recordings were transcribed verbatim and specific factors that contribute to safety incidents were identified in the analysis using the Yorkshire Contributory Factors Framework (YCFF). Other factors emerging from the data were also ascertained and added to the analytical framework. Thirteen factors that contribute to safety incidents in primary care were ascertained. Five unique factors for the primary-care setting were discovered in conjunction with eight factors present in the YCFF from hospital settings. The five unique primary care contributing factors to safety incidents represented a range of levels within the primary-care system from local working conditions to the upstream organisational level and the external policy context. The 13 factors included communication, access, patient factors, external policy context, dignity and respect, primary-secondary interface, continuity of care, task performance, task characteristics, time in the consultation, safety culture, team factors and the physical environment. Patient and carer feedback of this type could help primary-care professionals better understand and identify potential safety concerns and make appropriate service improvements. The comprehensive range of factors identified provides the groundwork for developing tools that systematically capture the multiple contributory factors to patient safety. Published by the BMJ Publishing Group Limited. For permission to use (where not

Impact of demographic factors on employees perceptions on health and safety management in the Greek Ministries

Directory of Open Access Journals (Sweden)

Pavlopoulou Georgia

2016-10-01

Full Text Available The purpose of the present study was to investigate the impact of selected demographic factors on perceptions of office workers regarding the management of health and safety in the office work place. For the data collection it was used a scale validated with a sample of 155 office employees. The final sample of the study was 301 subjects from three large Ministries in the Athens region of Greece, selected randomly. Exploratory factor analysis revealed four factors. A further comparison of the health and safety scale factors toward gender, marital status, working hours, monitoring or not seminars related to workplace safety and involvement or not in accidents in the office revealed that: (a The male employees had more positive perceptions than their female counterparts (t = 2.62, p <0.010. (b Positive perceptions showed and those who had attended seminars on safety and those who were not involved in office accidents (t = 2.16, p <0.032 and t = -2.19, p <0.033, respectively. (c It was also founded that men had more positive perceptions than women in the factor workplace environmental conditions (t = 2.40, p <0.018, while employees who had attended seminars on safety had a higher score on the factor health and safety issues in the office in comparison with their colleagues who did not, (t = 2.17, p <0.031. (d Employees who were involved in office accidents rated higher the questions of the factor health and safety issues in the office (t = -2.52, p <0. 015 and lower the factor workplace environmental conditions (t = -2.07, p = .043. It is concluded that despite the differences in the rating health and safety scale, in relation to selected variables, perceptions of employees regarding the management health and safety in the office work are positive.

Statistical Hot Channel Factors and Safety Limit CHFR/OFIR

Energy Technology Data Exchange (ETDEWEB)

Lee, Byeonghee; Park, Suki [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

The fuel integrity of research reactors are usually judged by comparing the critical heat flux ratio (CHFR) and the maximum fuel temperature (MFT) with the safety limits. Onset of flow instability ratio (OFIR) can also be used for the examination with CHFR. Hot channel factors (HCFs) are incorporated when calculating the CHFR/OFIR and MFT, to consider the uncertainties of fuel properties and thermo-hydraulic variables affecting them. The HCFs and safety limit CHFR is sometimes estimated to include too much conservatism, deteriorating the design flexibilities and operating margins. In this paper, a statistical estimation of HCFs and the safety limit CHFR/OFIR is presented by a random sampling of uncertainty parameters. A 15MW pool type research reactor is selected as the sample reactor for the estimation. The HCFs and the safety limit CHFR/OFIR of a 15MW pool type research reactor are evaluated statistically. The parameters affecting the HCF and the safety limit CHFR/OFIR are listed and their uncertainties are estimated. The relevant parameter uncertainties are sampled randomly and the HCFs and the safety limits are evaluated from them. The HCFs and the safety limit CHFR/OFIR with 95% probability are smaller than those estimated deterministically because the statistical evaluation convolute the correlation uncertainties and the other uncertainties in probabilistic way, whereas the deterministic evaluation simply multiply them.

Patient Safety Culture Survey in Pediatric Complex Care Settings: A Factor Analysis.

Science.gov (United States)

Hessels, Amanda J; Murray, Meghan; Cohen, Bevin; Larson, Elaine L

2017-04-19

Children with complex medical needs are increasing in number and demanding the services of pediatric long-term care facilities (pLTC), which require a focus on patient safety culture (PSC). However, no tool to measure PSC has been tested in this unique hybrid acute care-residential setting. The objective of this study was to evaluate the psychometric properties of the Nursing Home Survey on Patient Safety Culture tool slightly modified for use in the pLTC setting. Factor analyses were performed on data collected from 239 staff at 3 pLTC in 2012. Items were screened by principal axis factoring, and the original structure was tested using confirmatory factor analysis. Exploratory factor analysis was conducted to identify the best model fit for the pLTC data, and factor reliability was assessed by Cronbach alpha. The extracted, rotated factor solution suggested items in 4 (staffing, nonpunitive response to mistakes, communication openness, and organizational learning) of the original 12 dimensions may not be a good fit for this population. Nevertheless, in the pLTC setting, both the original and the modified factor solutions demonstrated similar reliabilities to the published consistencies of the survey when tested in adult nursing homes and the items factored nearly identically as theorized. This study demonstrates that the Nursing Home Survey on Patient Safety Culture with minimal modification may be an appropriate instrument to measure PSC in pLTC settings. Additional psychometric testing is recommended to further validate the use of this instrument in this setting, including examining the relationship to safety outcomes. Increased use will yield data for benchmarking purposes across these specialized settings to inform frontline workers and organizational leaders of areas of strength and opportunity for improvement.

Using partial safety factors in wind turbine design and testing

Energy Technology Data Exchange (ETDEWEB)

Musial, W.D. [National Renewable Energy Lab., Golden, CO (United States)

1997-12-31

This paper describes the relationship between wind turbine design and testing in terms of the certification process. An overview of the current status of international certification is given along with a description of limit-state design basics. Wind turbine rotor blades are used to illustrate the principles discussed. These concepts are related to both International Electrotechnical Commission and Germanischer Lloyd design standards, and are covered using schematic representations of statistical load and material strength distributions. Wherever possible, interpretations of the partial safety factors are given with descriptions of their intended meaning. Under some circumstances, the authors` interpretations may be subjective. Next, the test-load factors are described in concept and then related to the design factors. Using technical arguments, it is shown that some of the design factors for both load and materials must be used in the test loading, but some should not be used. In addition, some test factors not used in the design may be necessary for an accurate test of the design. The results show that if the design assumptions do not clearly state the effects and uncertainties that are covered by the design`s partial safety factors, outside parties such as test labs or certification agencies could impose their own meaning on these factors.

Prescribing safety, negotiating expertise. Building of nuclear safety human factors expertise

International Nuclear Information System (INIS)

Rolina, Gregory

2008-01-01

This Ph.D thesis is dedicated to a specific type of expertise, the safety of nuclear installations in the field of human and organisational factors. Empirical work is at the foundation of this thesis: the monitoring of experts 'in action', allowed a detailed reconstruction of three cases they were examining. The analysis, at the core of which lies the definition of what an efficient expertise can be, emphasizes the incompleteness of the knowledge that links together the nuclear facilities' organisational characteristics and their safety. This leads us to identify the expert's three ranges of actions (rhetorical, cognitive, operative). Defined from objectives and constraints likely to influence the expert's behaviour, those three ranges each require specific skills. A conception of expertise based on these ranges seems adaptable to other sectors and allows an enrichment of models of expertise cited in literature. Historical elements from French institutions of nuclear safety are also called upon to take into consideration some of the determinants of the expertise; its efficiency relies on the upholding of a continuous dialogue between the regulators (the experts and the control authority) and the regulated (the operators). This type of historically inherited regulation makes up a specificity of the French system of external control of nuclear risks. (author) [fr

Correction of X-ray diffraction profiles in linear-type PSPC by position factor

International Nuclear Information System (INIS)

Takahashi, Toshio

1992-01-01

PSPC (Position Sensitive Proportional Counter) makes it possible to obtain one-dimentional diffraction profiles without mechanical scanning. In a linear-type PSPC, the obtained profiles need correcting, because the position factor influences the intensity of the diffracted X-ray beam and the counting rate at each position on PSPC. The distances from the specimen are not the same at the center and at the edge of the detector, and the intensity decreases at the edge because of radiation and absorption. The counting rate varies with the incident angle of the diffracted beam at each position on PSPC. The position factor f i at channel i of the multichannel-analyser is given by f i = cos 4 α i ·exp{-μR(1/cosα i -1)} where R is the distance between the specimen and the center of PSPC, μ is the linear absorption coefficient and α i is the incident angle of the diffracted beam at channel i. The background profiles of silica gel powder were measured with CrKα and CuKα. The parameters of the model function were fitted to the profiles by the non-linear least squares method. The agreement between these parameters and the calculated values shows that the position factor can correct the measured profiles properly. (author)

Implication of human factors in terms of safety

International Nuclear Information System (INIS)

Furuta, Kazuo

2001-01-01

A critical accident of JCO occurred on September 30, 1999 gave a large impact not only to common society but also to nuclear energy field. This accident occurred by direct reason perfectly out of forecasting of the participants of nuclear energy, where a company made up a guideline violating from business allowance and safety rule and workmen also operated under a procedure out of the guideline. After the accident, a number of countermeasures on equipments, rules, and regulations were carried out, but discussion on software such as their operating methods, concrete regulation on business and authority of operators, and training of specialists seems to be much late. Safety is a problem on a complex system, containing not only hardware but also software such as human, organization, society, and so on. Then, here was discussed on a problem directly faced by conventional safety, engineering centering at hardware through thinking of a problem on human factors. (G.K.)

Organizational safety factors research lessons learned

International Nuclear Information System (INIS)

Ryan, T.G.

1995-01-01

This Paper reports lessons learned and state of knowledge gained from an organizational factors research activity involving commercial nuclear power plants in the United States, through the end of 1991, as seen by the scientists immediately involved in the research. Lessons learned information was gathered from the research teams and individuals using a question and answer format. The following five questions were submitted to each team and individual: (1) What organizational factors appear to influence safety performance in some systematic way, (2) Should organizational factors research focus at the plant level, or should it extend beyond the plant level to the parent company, rate setting commissions, regulatory agencies, (3) How important is having direct access to plants for doing organizational factors research, (4) What lessons have been learned to date as the result of doing organizational factors research in a nuclear regulatory setting, and (5) What organizational research topics and issues should be pursued in the future? Conclusions based on the responses provided for this report are that organizational factors research can be conducted in a regulatory setting and produce useful results. Technologies pioneered in other academic, commercial, and military settings can be adopted for use in a nuclear regulatory setting. The future success of such research depends upon the cooperation of regulators, contractors, and the nuclear industry

Safety profile of solid lipid nanoparticles loaded with rosmarinic acid for oral use: in vitro and animal approaches.

Science.gov (United States)

Madureira, Ana Raquel; Nunes, Sara; Campos, Débora A; Fernandes, João C; Marques, Cláudia; Zuzarte, Monica; Gullón, Beatriz; Rodríguez-Alcalá, Luís M; Calhau, Conceição; Sarmento, Bruno; Gomes, Ana Maria; Pintado, Maria Manuela; Reis, Flávio

2016-01-01

Rosmarinic acid (RA) possesses several protective bioactivities that have attracted increasing interest by nutraceutical/pharmaceutical industries. Considering the reduced bioavailability after oral use, effective (and safe) delivery systems are crucial to protect RA from gastrointestinal degradation. This study aims to characterize the safety profile of solid lipid nanoparticles produced with Witepsol and Carnauba waxes and loaded with RA, using in vitro and in vivo approaches, focused on genotoxicity and cytotoxicity assays, redox status markers, hematological and biochemical profile, liver and kidney function, gut bacterial microbiota, and fecal fatty acids composition. Free RA and sage extract, empty nanoparticles, or nanoparticles loaded with RA or sage extract (0.15 and 1.5 mg/mL) were evaluated for cell (lymphocytes) viability, necrosis and apoptosis, and antioxidant/prooxidant effects upon DNA. Wistar rats were orally treated for 14 days with vehicle (control) and with Witepsol or Carnauba nanoparticles loaded with RA at 1 and 10 mg/kg body weight/d. Blood, urine, feces, and several tissues were collected for analysis. Free and loaded RA, at 0.15 mg/mL, presented a safe profile, while genotoxic potential was found for the higher dose (1.5 mg/mL), mainly by necrosis. Our data suggest that both types of nanoparticles are safe when loaded with moderate concentrations of RA, without in vitro genotoxicity and cytotoxicity and with an in vivo safety profile in rats orally treated, thus opening new avenues for use in nutraceutical applications.

Development of a draft of human factors safety review procedures for the Korean next generation reactor

Energy Technology Data Exchange (ETDEWEB)

Lee, Jung Woon; Moon, B. S.; Park, J. C.; Lee, Y. H.; Oh, I. S.; Lee, H. C. [Korea Atomic Energy Research Institute, Taejeon (Korea)

2000-02-01

In this study, a draft of human factors engineering (HFE) safety review procedures (SRP) was developed for the safety review of KNGR based on HFE Safety and Regulatory Requirements and Guidelines (SRRG). This draft includes acceptance criteria, review procedure, and evaluation findings for the areas of review including HFE Program Management, Human Factors Analyses, Human Factors Design, and HFE Verification and Validation, based on Section 15.1 'Human Factors Engineering Design Process' and 15.2 'Control Room Human Factors Engineering' of KNGR Specific Safety Requirements and Chapter 15 'Human Factors Engineering' of KNGR Safety Regulatory Guides. For the effective review, human factors concerns or issues related to advanced HSI design that have been reported so far should be extensively examined. In this study, a total of 384 human factors issues related to the advanced HSI design were collected through our review of a total of 145 documents. A summary of each issue was described and the issues were identified by specific features of HSI design. These results were implemented into a database system. 8 refs., 2 figs. (Author)

Safety assessment of genetically modified rice expressing human serum albumin from urine metabonomics and fecal bacterial profile.

Science.gov (United States)

Qi, Xiaozhe; Chen, Siyuan; Sheng, Yao; Guo, Mingzhang; Liu, Yifei; He, Xiaoyun; Huang, Kunlun; Xu, Wentao

2015-02-01

The genetically modified (GM) rice expressing human serum albumin (HSA) is used for non-food purposes; however, its food safety assessment should be conducted due to the probability of accidental mixture with conventional food. In this research, Sprague Dawley rats were fed diets containing 50% (wt/wt) GM rice expressing HSA or non-GM rice for 90 days. Urine metabolites were detected by (1)H NMR to examine the changes of the metabolites in the dynamic process of metabolism. Fecal bacterial profiles were detected by denaturing gradient gel electrophoresis to reflect intestinal health. Additionally, short chain fatty acids and fecal enzymes were investigated. The results showed that compared with rats fed the non-GM rice, some significant differences were observed in rats fed with the GM rice; however, these changes were not significantly different from the control diet group. Additionally, the gut microbiota was associated with blood indexes and urine metabolites. In conclusion, the GM rice diet is as safe as the traditional daily diet. Furthermore, urine metabonomics and fecal bacterial profiles provide a non-invasive food safety assessment rat model for genetically modified crops that are used for non-food/feed purposes. Fecal bacterial profiles have the potential for predicting the change of blood indexes in future. Copyright © 2014 Elsevier Ltd. All rights reserved.

Central safety factor and β _N control on NSTX-U via beam power and plasma boundary shape modification, using TRANSP for closed loop simulations

Energy Technology Data Exchange (ETDEWEB)

Boyer, M. D.; Andre, R.; Gates, D. A.; Gerhardt, S.; Goumiri, I. R.; Menard, J.

2015-04-24

The high-performance operational goals of NSTX-U will require development of advanced feedback control algorithms, including control of ßN and the safety factor profile. In this work, a novel approach to simultaneously controlling ßN and the value of the safety factor on the magnetic axis, q0, through manipulation of the plasma boundary shape and total beam power, is proposed. Simulations of the proposed scheme show promising results and motivate future experimental implementation and eventual integration into a more complex current profile control scheme planned to include actuation of individual beam powers, density, and loop voltage. As part of this work, a flexible framework for closed loop simulations within the high-fidelity code TRANSP was developed. The framework, used here to identify control-design-oriented models and to tune and test the proposed controller, exploits many of the predictive capabilities of TRANSP and provides a means for performing control calculations based on user-supplied data (controller matrices, target waveforms, etc.). The flexible framework should enable high-fidelity testing of a variety of control algorithms, thereby reducing the amount of expensive experimental time needed to implement new control algorithms on NSTX-U and other devices.

The human factors and the safety of experimentation reactors

International Nuclear Information System (INIS)

Jeffroy, F.; Delaporte-Normier, M.L.

2007-01-01

Inside IRSN (Institute for Radiological protection and Nuclear Safety), the mission of the Human Factors Group is to assess the way operators of nuclear installations take into account the risks related to human activities. In the last few years, IRSN has been involved in the safety analysis of different installations where Cea develops research programs, in particular experimental reactors. The first part of this article presents the methodology used by IRSN to evaluate how operators take into account risks related to human activities. This methodology is made up of 4 steps: 1) the identification of the human activities that convey a risk for the installation nuclear safety (safety-sensitive activities), for instance in the case of the Masurca reactor, it has been shown that errors made during the manufacturing of fuel tubes can lead to a criticality accident; 2) listing all the dispositions or arrangements taken to make human safety-sensitive activities more reliable; 3) checking the efficiency of such dispositions or arrangements; and 4) assessing the ability of the operators to generate the adequate dispositions or arrangements. The second part highlights the necessity to develop inside these research installations an organisation that facilitates cooperation between experimenters and operators

Application of factor analysis in psychological diagnostics (sample: study of students’ social safety

Directory of Open Access Journals (Sweden)

Pavel Aleksandrovich Kislyakov

2015-10-01

Our recommendations for the use of factor analysis, with necessary restrictions and clear reasons of a possible ambiguity of solutions, will be useful to everyone interested in mastering an adequate mathematical tool for solving problems pertaining to the humanities, in particular, those of practical psychology. As a practical example is presented the research of the psychological factors which provide students’ social safety. With the help of the factor analysis relevant personal and professional qualities of a teacher were revealed which are the subjective factors of students’ social safety, namely: social anticipation, socio-psychological stress resistance, social tolerance, professional orientation, responsibility, communication skills.

Verification of Overall Safety Factors In Deterministic Design Of Model Tested Breakwaters

DEFF Research Database (Denmark)

Burcharth, H. F.

2001-01-01

The paper deals with concepts of safety implementation in design. An overall safety factor concept is evaluated on the basis of a reliability analysis of a model tested rubble mound breakwater with monolithic super structure. Also discussed are design load identification and failure mode limit...

The balance between safety and productivity and its relationship with human factors and safety awareness and communication in aircraft manufacturing

NARCIS (Netherlands)

Karanikas, N.; Melis, Damien Jose; Kourousis, Kyriakos

2017-01-01

Background: This paper presents the findings of a pilot research survey which assessed the degree of balance between safety and productivity, and its relationship with awareness and communication of human factors and safety rules in the aircraft manufacturing environment. Methods: The study was

Identification of road user related risk factors, Deliverable 5.1 of the H2020 project SafetyCube (Safety CaUsation, Benefits and Efficiency).

NARCIS (Netherlands)

Filtness, A. & Papadimitriou, E. (Eds.) Leskovšek, B. Focant, N. Martensen, H. Sgarra, V. Usami, D.S. Soteropoulos, A. Stadlbauer, S. Theofilatos, A. Yannis, G. Ziakopoulos, A. Diamandouros, K. Durso, C. Goldenbeld, C. Loenis, B. Schermers, G. Petegem, J.-H. van Elvik, R. Hesjevoll, I.S. Quigley, C. & Papazikou, E.

2017-01-01

The present Deliverable (D5.1) describes the identification and evaluation of infrastructure related risk factors. It outlines the results of Task 5.1 of WP5 of SafetyCube, which aimed to identify and evaluate infrastructure related risk factors and related road safety problems by (i) presenting a

Appreciating Complexity in Adolescent Self-Harm Risk Factors: Psychological Profiling in a Longitudinal Community Sample.

Science.gov (United States)

Stanford, Sarah; Jones, Michael P; Hudson, Jennifer L

2018-05-01

Past research identifies a number of risk factors for adolescent self-harm, but often fails to account for overlap between these factors. This study investigated the underlying, broader concepts by identifying different psychological profiles among adolescents. We then compared new self-harm rates over a six-month period across different psychological profiles. Australian high school students (n = 326, 68.1% female) completed a questionnaire including a broad range of psychological and socioenvironmental risk and protective factors. Non-hierarchical cluster analysis produced six groups with different psychological profiles at baseline and rate of new self-harm at follow-up. The lowest rate was 1.4% in a group that appeared psychologically healthy; the highest rate was 37.5% in a group that displayed numerous psychological difficulties. Four groups with average self-harm had varied psychological profiles including low impulsivity, anxiety, impulsivity, and poor use of positive coping strategies. Identifying multiple profiles with distinct psychological characteristics can improve detection, guide prevention, and tailor treatment.

Partial safety factors for berthing velocity and loads on marine structures

NARCIS (Netherlands)

Roubos, A.A.; Peters, D.J.; Groenewegen, Leon; Steenbergen, R.

2018-01-01

Design methods for marine structures have evolved into load and resistance factor design, however existing partial safety factors related to berthing velocity and loads have not been verified and validated by measurement campaigns. In this study, field observations of modern seagoing vessels

Algorithm Validation of the Current Profile Reconstruction of EAST Based on Polarimeter/Interferometer

International Nuclear Information System (INIS)

Qian Jinping; Ren Qilong; Wan Baonian; Liu Haiqin; Zeng Long; Luo Zhengping; Chen Dalong; Shi Tonghui; Sun Youwen; Shen Biao; Xiao Bingjia; Lao, L. L.; Hanada, K.

2015-01-01

The method of plasma current profile reconstruction using the polarimeter/interferometer (POINT) data from a simulated equilibrium is explored and validated. It is shown that the safety factor (q) profile can be generally reconstructed from the external magnetic and POINT data. The reconstructed q profile is found to reasonably agree with the initial equilibriums. Comparisons of reconstructed q and density profiles using the magnetic data and the POINT data with 3%, 5% and 10% random errors are investigated. The result shows that the POINT data could be used to a reasonably accurate determination of the q profile. (fusion engineering)

Safety of PEGylated recombinant human full-length coagulation factor VIII (BAX 855) in the overall context of PEG and PEG conjugates.

Science.gov (United States)

Stidl, R; Fuchs, S; Bossard, M; Siekmann, J; Turecek, P L; Putz, M

2016-01-01

BAX 855 is a PEGylated human full-length recombinant factor VIII (rFVIII) based on licensed rFVIII (ADVATE). The applied PEGylation technology has been optimized to retain functionality of the FVIII molecule, improve its pharmacokinetic properties and allow less frequent injections while maintaining efficacy. The aim of this study was to confirm that the excellent safety profile of ADVATE remains unchanged after PEGylation. Non-clinical safety studies with BAX 855 and its respective unbound polyethylene glycol (PEG) were conducted in several species. The distribution of a single dose of radiolabelled BAX 855 was further investigated in rats. Publically available safety data on PEG alone and PEGylated biomolecules were summarized and reviewed for specific safety findings attributable to PEG or PEGylated biopharmaceuticals. Safety pharmacology studies in rabbits and macaques and repeated dose toxicity studies in rats and macaques identified no safety issues. Results of a distribution study in rats administered radiolabelled BAX 855 showed that radioactivity was completely excreted; urine was the major elimination route. A 28-day study in rats dosed with the unbound PEG constituent (PEG2ru20KCOOH) of BAX 855 showed no adverse or non-adverse effects. Safety data for PEG and PEG-protein conjugates indicate no safety concerns associated with PEG at clinically relevant dose levels. Although vacuolation of certain cell types has been reported in mammals, no such vacuolation was observed with BAX 855 or with the unbound PEG constituent. Non-clinical safety evaluation of PEG and BAX 855 identified no safety signals; the compound is now in clinical development for the treatment of patients with haemophilia A. © 2015 Baxalta Innovations GmbH. Haemophilia Published by John Wiley & Sons Ltd.

Reporting and understanding the safety and adverse effect profile of mobile apps for psychosocial interventions: An update.

Science.gov (United States)

Naeem, Farooq; Gire, Nadeem; Xiang, Shuo; Yang, Megan; Syed, Yumeen; Shokraneh, Farhad; Adams, Clive; Farooq, Saeed

2016-06-22

Recent years have seen a rapidly increasing trend towards the delivery of health technology through mobile devices. Smartphones and tablet devices are thus becoming increasingly popular for accessing information and a wide range of services, including health care services. Modern mobile apps can be used for a variety of reasons, ranging from education for the patients and assistance to clinicians to delivery of interventions. Mobile phone apps have also been established to benefit patients in a scope of interventions across numerous medical specialties and treatment modalities. Medical apps have their advantages and disadvantages. It is important that clinicians have access to knowledge to make decisions regarding the use of medical apps on the basis of risk-benefit ratio. Mobile apps that deliver psycho social interventions offer unique challenges and opportunities. A number of reviews have highlighted the potential use of such apps. There is a need to describe, report and study their side effects too. The adverse effects associated with these apps can broadly be divided into: (1) those resulting from the security and safety concerns; (2) those arising from the use of a particular psycho social intervention; and (3) those due to the interaction with digital technology. There is a need to refine and reconsider the safety and adverse effects in this area. The safety profile of a mobile PSI app should describe its safety profile in: (1) privacy and security; (2) adverse effects of psychotherapy; and (3) adverse effects unique to the use of apps and the internet. This is, however, a very new area and further research and reporting is required to inform clinical decision making.

Efficacy, safety and pharmacokinetics of a new high-purity factor X concentrate in women and girls with hereditary factor X deficiency.

Science.gov (United States)

Kulkarni, R; James, A H; Norton, M; Shapiro, A

2018-05-01

Essentials Plasma-derived factor X concentrate (pdFX) is used to treat hereditary factor X deficiency. pdFX pharmacokinetics, safety and efficacy were assessed in factor X-deficient women/girls. Treatment success rate was 98%; only 6 adverse events in 2 subjects were possibly pdFX related. On-demand pdFX 25 IU kg -1 was effective and safe in women/girls with factor X deficiency. Background A high-purity, plasma-derived factor X concentrate (pdFX) has been approved for the treatment of hereditary FX deficiency, an autosomal recessive disorder. Objective To perform post hoc assessments of pdFX pharmacokinetics, safety and efficacy in women and girls with hereditary FX deficiency. Patients/Methods Subjects aged ≥ 12 years with moderate/severe FX deficiency (plasma FX activity of girls (aged 14-58 years [median, 25.5 years]) received 267 pdFX infusions. Mean monthly infusions per subject were higher among women and girls (2.48) than among men and boys (1.62). In women and girls, 132 assessable bleeding episodes (61 heavy menstrual bleeds, 47 joint bleeds, 15 muscle bleeds, and nine other bleeds) were treated with pdFX, with a 98% treatment success rate versus 100% in men and boys. Mean pdFX incremental recovery was similar in the two groups (2.05 IU dL -1 versus 1.91 IU dL -1 per IU kg -1 ), as was the mean half-life (29.3 h versus 29.5 h). Of 142 adverse events in women and girls, headache was the most common (12 events in six subjects). Six events (two infusion-site erythema, two fatigue, one back pain, one infusion-site pain) in two subjects were considered to be possibly pdFX-related. Following the trial, pdFX was used to successfully maintain hemostasis in two subjects undergoing obstetric delivery. Conclusions pdFX was well tolerated and effective in women and girls with FX deficiency. Although women and girls had different bleeding symptoms and sites than men and boys, their pdFX pharmacokinetic profile was comparable. © 2018 The Authors. Journal of

Factors impacting perceived safety among staff working on mental health wards.

Science.gov (United States)

Haines, Alina; Brown, Andrew; McCabe, Rhiannah; Rogerson, Michelle; Whittington, Richard

2017-09-01

Safety at work is a core issue for mental health staff working on in-patient units. At present, there is a limited theoretical base regarding which factors may affect staff perceptions of safety. This study attempted to identify which factors affect perceived staff safety working on in-patient mental health wards. A cross-sectional design was employed across 101 forensic and non-forensic mental health wards, over seven National Health Service trusts nationally. Measures included an online staff survey, Ward Features Checklist and recorded incident data. Data were analysed using categorical principal components analysis and ordinal regression. Perceptions of staff safety were increased by ward brightness, higher number of patient beds, lower staff to patient ratios, less dayroom space and more urban views. The findings from this study do not represent common-sense assumptions. Results are discussed in the context of the literature and may have implications for current initiatives aimed at managing in-patient violence and aggression. None. © The Royal College of Psychiatrists 2017. This is an open access article distributed under the terms of the Creative Commons Attribution (CC BY) license.

Human Factors in Fire Safety Management and Prevention

Directory of Open Access Journals (Sweden)

M.A. Othuman Mydin

2014-07-01

Full Text Available Fire protection is the study and practice of mitigating the unwanted effects of potentially destructive fires. It involves the study of the behavior, compartmentalization, and investigation of fire and its related emergencies, as well as the research and development, production, testing and application of mitigating systems. Problems still occurred despite of the adequate fire safety systems installed. For most people in high-risk buildings, not all accidents were caused by them. They were more likely to be the victims of a fire that occurred. Besides damaging their properties and belongings, some people were burned to death for not knowing what to do if fire happens in their place. This paper will present the human factors in fire safety management and prevention system.

Profile and Risk Factor Analysis of Unintentional Injuries in Children.

Science.gov (United States)

Bhamkar, Rahul; Seth, Bageshree; Setia, Maninder Singh

2016-10-01

To study the profile and various risk factors associated with unintentional injuries in children. The study is a cross sectional analysis of data collected from 351 children presenting with unintentional injury to a tertiary care hospital in Navi Mumbai, India. Data were collected about variables based on Haddon Phase Factor Matrix - host, environment and agent factors. Proportions for categorical variables across various groups were compared using Chi square test or Fisher's exact test. Logistic regression model was used to evaluate the factors. Falls (36 %) were the most common injuries followed by bites (23 %). Majority of children were school going children (38 %) followed by preschool children (29 %). Forty-seven percent were from lower socioeconomic class. Commonest place of injury was home (48 %) and the commonest time was evening (49 %). Though there was male predominance in injuries, the difference across gender did not vary significantly (p = 0.15). Poisonings were significantly more common in infants and toddlers and in rural population (p risk of bites compared to urban (p Profile of injuries varies widely as per the variations in agent, host and environmental factors. Socio-environmental, economic conditions and infancy-toddler age groups are predisposing risk factors for bites and poisoning. Although rural areas and lower socioeconomic class population are more vulnerable to serious types of injuries, they still lack essential basic medical care.

Identifying at-risk profiles and protective factors for problem gambling: A longitudinal study across adolescence and early adulthood.

Science.gov (United States)

Allami, Youssef; Vitaro, Frank; Brendgen, Mara; Carbonneau, René; Tremblay, Richard E

2018-05-01

Past studies have identified various risk and protective factors for problem gambling (PG). However, no study has examined the interplay between these factors using a combination of person-centered and variable-centered approaches embedded within a longitudinal design. The present study aimed to (a) identify distinct profiles in early adolescence based on a set of risk factors commonly associated with PG (impulsivity, depression, anxiety, drug-alcohol use, aggressiveness, and antisociality), (b) explore the difference in reported gambling problems between these profiles during midadolescence and early adulthood, and (c) identify family- and peer-related variables that could operate as protective or compensatory factors in this context. Two samples were used: (a) a population sample (N = 1,033) living in low socioeconomic-status neighborhoods and (b) a population sample (N = 3,017) representative of students attending Quebec schools. Latent profile analyses were conducted to identify at-risk profiles based on individual risk factors measured at age 12 years. Negative binomial regression models were estimated to compare profiles in terms of their reported gambling problems at ages 16 and 23. Finally, family- and peer-related variables measured at age 14 were included to test their protective or compensatory role with respect to the link between at-risk profiles and gambling problems. Four profiles were identified: well-adjusted, internalizing, externalizing, and comorbid. Compared to the well-adjusted profile, the externalizing and comorbid profiles reported more gambling problems at ages 16 and 23, but the internalizing profile did not differ significantly. Various protective and compensatory factors emerged for each profile at both time points. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Partial Safety Factors for Fatigue Design of Wind Turbine Blades

DEFF Research Database (Denmark)

Toft, Henrik Stensgaard; Sørensen, John Dalsgaard

2010-01-01

In the present paper calibration of partial safety factors for fatigue design of wind turbine blades is considered. The stochastic models for the physical uncertainties on the material properties are based on constant amplitude fatigue tests and the uncertainty on Miners rule for linear damage...... accumulation is determined from variable amplitude fatigue tests with the Wisper and Wisperx spectra. The statistical uncertainty for the assessment of the fatigue loads is also investigated. The partial safety factors are calibrated for design load case 1.2 in IEC 61400-1. The fatigue loads are determined...... from rainflow-counting of simulated time series for a 5MW reference wind turbine [1]. A possible influence of a complex stress state in the blade is not taken into account and only longitudinal stresses are considered....

Efficacy and safety of adalimumab in ankylosing spondylitis

Directory of Open Access Journals (Sweden)

Mounach A

2014-08-01

Full Text Available Aziza Mounach, Abdellah El MaghraouiRheumatology Department, Military Hospital Mohammed V, Rabat, MoroccoAbstract: Ankylosing spondylitis (AS is the most common and most severe subtype of spondyloarthritis. It also may be an outcome of any of the other spondyloarthritis subtypes. AS preferentially affects the sacroiliac joints and the tip of the column, with a tendency to later ankylosis. Peripheral joints, enthesis, and other extra-articular involvement may be observed. Tumor necrosis factor (TNF inhibitors are now well-established, effective drugs in the treatment of AS symptoms. Adalimumab, which is a fully human monoclonal antibody that binds to and neutralizes TNF, has demonstrated efficacy in treating AS symptoms, including axial involvement, peripheral arthritis, enthesitis, uveitis, gut involvement, and psoriasis. Furthermore, adalimumab has showed an overall acceptable safety profile. In this paper, we review the efficacy and safety profile of adalimumab in the treatment of AS, and discuss its differences from the other anti-TNF drugs reported in the literature.Keywords: ankylosing spondylitis, spondyloarthritis, adalimumab, tumor necrosis factor-α

Study on safety educations against individual causal factors of unsafe acts and specification of target trainees

International Nuclear Information System (INIS)

Hirose, Ayako; Takeda, Daisuke

2016-01-01

Many accidents and incidents are caused by unsafe acts. It is important to reduce these unsafe acts for preventing the accidents. The countermeasures for each causal factor behind unsafe acts are needed, however, comparing with improvement of facilities, workers-oriented measures such as safety educations are not sufficient. Then the purposes of this study are as follows: 1) to investigate the individual factors which have great impact of unsafe acts and the existing safety educations which aim to mitigate the impact of these factors, 2) to specify the target trainees to perform these safety educations. To identify common factors that affect unsafe act significantly, a web survey was conducted to 500 workers who have regularly carried out accident prediction training (i.e. Kiken-Yochi training). They were asked the situation which they were apt to act unsafely by free description. As the result, the following three main factors were extracted: impatience, overconfidence, and bothersome. Also, it was found that there were few existing safety educations which aim to mitigate the impact of these factors except for overconfidence. To specify the target trainees to perform safety educations which aim to mitigate the impact of these three factors, another web survey was conducted to 200 personnel in charge of safety at the workplace. They were asked the features of workers who tended to act unsafely by age group. The relationship between the factor that need to mitigate and the trainee who need to receive the education were clarified from the survey. (author)

Profile of coronary heart disease risk factors in first-year university ...

African Journals Online (AJOL)

There is substantial evidence that coronary heart disease risk factors are present in people of all ages. The extent to which the problem exists in university students in South Africa has not been confirmed in the literature and needs further investigation. The aim of the study was to profile the coronary heart disease risk factors ...

The effects of the non-contingent presentation of safety signals on the elimination of safety behaviors: An experimental comparison between individuals with low and high obsessive-compulsive profiles.

Science.gov (United States)

Angelakis, Ioannis; Austin, Jennifer L

2018-06-01

Safety behaviors, defined as engagement in avoidance within safe environments, are a key symptom of obsessive-compulsive and related disorders. They may interfere with daily functioning and as such their emission should be reduced. The purpose of the current study is to investigate the effects of the non-contingent presentation of safety signals (cues produced by safety behaviors) on reducing safety behaviors in participants self-reporting low and high OCD profiles. In total, 32 participants were asked to play a game to gain points and avoid their loss. After having developed avoidance behavior, evidenced by maintaining all of their earned points, they were exposed to safe environments where no point loss was programmed. In Test 1, safety cues (blue bar) were produced contingent on performing safety behaviors. In Test 2, safety cues were presented continuously without any response requirement. Findings demonstrated that high OCD group displayed higher rates of safety behaviors than low OCD group. However, exposure to the non-contingent presentation of safety signals eliminated their emission in both groups. Future studies need to evaluate the effects of different non-contingent schedules on the suppression of safety behaviors. These findings contribute to the literature by demonstrating that non-contingent introduction of safety signals eliminated safety behaviors completely, even in high OCD participants, who performed safety behavior at higher rates. Such a treatment protocol may ameliorate exposure therapy in which response prevention constitutes a key element and is generally associated with increased drop-out rates. Copyright © 2017 Elsevier Ltd. All rights reserved.

A dispersion safety factor for LNG vapor clouds

Energy Technology Data Exchange (ETDEWEB)

Vílchez, Juan A. [TIPs – Trámites, Informes y Proyectos, SL, Llenguadoc 10, 08030 Barcelona (Spain); Villafañe, Diana [Centre d’Estudis del Risc Tecnològic (CERTEC), Universitat Politècnica de Catalunya, Diagonal 647, 08028 Barcelona, Catalonia (Spain); Casal, Joaquim, E-mail: joaquim.casal@upc.edu [Centre d’Estudis del Risc Tecnològic (CERTEC), Universitat Politècnica de Catalunya, Diagonal 647, 08028 Barcelona, Catalonia (Spain)

2013-02-15

Highlights: ► We proposed a new parameter: the dispersion safety factor (DSF). ► DSF is the ratio between the distance reached by the LFL and that reached by the visible cloud. ► The results for the DSF agree well with the evidence from large scale experiments. ► Two expressions have been proposed to calculate DSF as a function of H{sub R}. ► The DSF may help in indicating the danger of ignition of a LNG vapor cloud. -- Abstract: The growing importance of liquefied natural gas (LNG) to global energy demand has increased interest in the possible hazards associated with its storage and transportation. Concerning the event of an LNG spill, a study was performed on the relationship between the distance at which the lower flammability limit (LFL) concentration occurs and that corresponding to the visible contour of LNG vapor clouds. A parameter called the dispersion safety factor (DSF) has been defined as the ratio between these two lengths, and two expressions are proposed to estimate it. During an emergency, the DSF can be a helpful parameter to indicate the danger of cloud ignition and flash fire.

A dispersion safety factor for LNG vapor clouds

International Nuclear Information System (INIS)

Vílchez, Juan A.; Villafañe, Diana; Casal, Joaquim

2013-01-01

Highlights: ► We proposed a new parameter: the dispersion safety factor (DSF). ► DSF is the ratio between the distance reached by the LFL and that reached by the visible cloud. ► The results for the DSF agree well with the evidence from large scale experiments. ► Two expressions have been proposed to calculate DSF as a function of H R . ► The DSF may help in indicating the danger of ignition of a LNG vapor cloud. -- Abstract: The growing importance of liquefied natural gas (LNG) to global energy demand has increased interest in the possible hazards associated with its storage and transportation. Concerning the event of an LNG spill, a study was performed on the relationship between the distance at which the lower flammability limit (LFL) concentration occurs and that corresponding to the visible contour of LNG vapor clouds. A parameter called the dispersion safety factor (DSF) has been defined as the ratio between these two lengths, and two expressions are proposed to estimate it. During an emergency, the DSF can be a helpful parameter to indicate the danger of cloud ignition and flash fire

Factors affecting the utilization of safety devices by commercial ...

African Journals Online (AJOL)

Background: Motorcycle crashes are common causes of morbidity and mortality for both riders and passengers. To prevent and reduce the severity of injuries sustained through road traffic accidents (RTA) many countries enforce the use of safety devices while riding. Certain factors including non-enforcement of the existing ...

Time trends in osteoporosis risk factor profiles

DEFF Research Database (Denmark)

Holm, Jakob Præst; Hyldstrup, Lars; Jensen, Jens-Erik Beck

2016-01-01

The aim of this article was to identify prevalent osteoporosis risk factors, medications and comorbidities associated with bone mineral density (BMD). Furthermore to evaluate changes in risk factor profiles over 12 years. 6285 women consecutively referred to an osteoporosis specialist clinic were...... was established in a real-life setting. The prevalence of osteoporosis and proportion of patient's having comorbidity's associated with osteoporosis were increasing during the inclusion period (start 23.8 %, end 29.7 %). Increasing age (OR = 1.05), current smoking (OR = 1.18), estrogen deficiency (OR = 1.......7), hyperthyroidism (OR = 1.5), previous major osteoporotic fracture (OR = 1.7), former osteoporosis treatment (OR = 3.5), higher BMI (OR = 0.87), use of calcium supplementation (OR = 1.2), high exercise level (OR = 0.7), and use of thiazide diuretics (OR = 0.7) were identified as predictors of osteoporosis by DXA...

Analysis of Traffic Safety Factors at Level Rail-Road Crossings

Directory of Open Access Journals (Sweden)

Tomislav Mlinarić

2012-10-01

Full Text Available The paper analyses the main factors of traffic safety andreliabilityat level crossings. The number and causes of accidentsare stated, that result from ignorance, insufficient training ofthe traffic participants, their ilnsponsibility and insufficient orincomplete legislation, as well as from insufficiently professionaland scientifically not serious enough approach to solvingthis cardinal problem in road and railway traffic. Based on theanalysis the causes are determined and solutions proposed, aswell as more efficient methods to improve safety and reduce thenumber of traffic accidents at level crossings.

Measurement of Safety Factor Using Hall Probes on CASTOR Tokamak

Czech Academy of Sciences Publication Activity Database

Kovařík, Karel; Ďuran, Ivan; Bolshakova, I.; Holyaka, R.; Erashok, V.

2006-01-01

Roč. 56, suppl.B (2006), s. 104-110 ISSN 0011-4626. [Symposium on Plasma Physics and Technology/22nd./. Praha, 26.6.2006-29.6.2006] R&D Projects: GA AV ČR(CZ) KJB100430504 Institutional research plan: CEZ:AV0Z20430508 Keywords : Plasma * tokamak * safety factor * hall probe Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 0.568, year: 2006

On applying safety archetypes to the Fukushima accident to identify nonlinear influencing factors

Energy Technology Data Exchange (ETDEWEB)

Sousa, A.L., E-mail: alsousa@cnen.gov.br [Comissao Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil); Ribeiro, A.C.O., E-mail: antonio.ribeiro@bayer.com [Bayer Crop Science Brasil S.A., Belford Roxo, RJ (Brazil); Duarte, J.P., E-mail: julianapduarte@poli.ufrj.br [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola Politecnica. Departamento de Engenharia Nuclear; Frutuoso e Melo, P.F., E-mail: frutuoso@nuclear.ufrj.br [Coordenacao dos Programas de Pos-Graduacao em Engenharia (COOPE/UFRJ), RJ (Brazil). Programa de Engenharia Nuclear

2013-07-01

Nuclear power plants are typically characterized as high reliable organizations. In other words, they are organizations defined as relatively error free over a long period of time. Another relevant characteristic of the nuclear industry is that safety efforts are credited to design. However, major accidents, like the Fukushima accident, have shown that new tools are needed to identify latent deficiencies and help improve their safety level. Safety archetypes proposed elsewhere (e. g., safety issues stalled in the face of technological advances and eroding safety) consonant with International Atomic Energy Agency (IAEA) efforts are used to examine different aspects of accidents in a systemic perspective of the interaction between individuals, technology and organizational factors. Safety archetypes can help consider nonlinear interactions. Effects are rarely proportional to causes and what happens locally in a system (near the current operating point) often does not apply to distant regions (other system states), so that one has to consider the so-called nonlinear interactions. This is the case, for instance, with human probability failure estimates and safety level identification. In this paper, we discuss the Fukushima accident in order to show how archetypes can highlight nonlinear interactions of factors that influenced it and how to maintain safety levels in order to prevent other accidents. The initial evaluation of the set of archetypes suggested in the literature showed that at least four of them are applicable to the Fukushima accident, as is inferred from official reports on the accident. These are: complacency (that is, the effects of complacency on safety), decreased safety awareness, fixing on symptoms and not the real causes and eroding safety. (author)

On applying safety archetypes to the Fukushima accident to identify nonlinear influencing factors

International Nuclear Information System (INIS)

Sousa, A.L.; Ribeiro, A.C.O.; Duarte, J.P.; Frutuoso e Melo, P.F.

2013-01-01

Nuclear power plants are typically characterized as high reliable organizations. In other words, they are organizations defined as relatively error free over a long period of time. Another relevant characteristic of the nuclear industry is that safety efforts are credited to design. However, major accidents, like the Fukushima accident, have shown that new tools are needed to identify latent deficiencies and help improve their safety level. Safety archetypes proposed elsewhere (e. g., safety issues stalled in the face of technological advances and eroding safety) consonant with International Atomic Energy Agency (IAEA) efforts are used to examine different aspects of accidents in a systemic perspective of the interaction between individuals, technology and organizational factors. Safety archetypes can help consider nonlinear interactions. Effects are rarely proportional to causes and what happens locally in a system (near the current operating point) often does not apply to distant regions (other system states), so that one has to consider the so-called nonlinear interactions. This is the case, for instance, with human probability failure estimates and safety level identification. In this paper, we discuss the Fukushima accident in order to show how archetypes can highlight nonlinear interactions of factors that influenced it and how to maintain safety levels in order to prevent other accidents. The initial evaluation of the set of archetypes suggested in the literature showed that at least four of them are applicable to the Fukushima accident, as is inferred from official reports on the accident. These are: complacency (that is, the effects of complacency on safety), decreased safety awareness, fixing on symptoms and not the real causes and eroding safety. (author)

Factors Affecting the Behavior of Engineering Students toward Safety Practices in the Machine Shop

Directory of Open Access Journals (Sweden)

Jessie Kristian M. Neria

2015-08-01

Full Text Available This study aimed to determine the factors that affect the behavior of engineering student toward safety practices in the machine shop. Descriptive type of research was utilized in the study. Results showed that most of the engineering students clearly understand the signage shown in the machine shop. Students are aware that they should not leave the machines unattended. Most of the engineering students handle and use the machine properly. The respondents have an average extent of safety practices in the machine shop which means that they are applying safety practices in their every activity in machine shop. There is strong relationship between the safety practices and the factors affecting behavior in terms of signage, reminder of teacher and rules and regulation.

Beam-scanning system for determination of beam profiles and form factors in merged-beam experiments

International Nuclear Information System (INIS)

Keyser, C.J.; Froelich, H.R.; Mitchell, J.B.A.; McGowan, J.W.

1979-01-01

A beam-scanning system for a merged electron-ion beam experiment is described. This system is used to determine the horizontal and vertical beam profiles and the form factors at three different locations along the axis of the beams. Design details of the wedge-shaped scanners and the electronic circuit for obtaining beam profiles and form factors are described. The form factor derivation for merged beams is given and an expression in terms of measured quantities is derived. (author)

Optimized profiles for improved confinement and stability in the Dill-D tokamak

International Nuclear Information System (INIS)

Taylor, T.S.; St John, H.; Turnbull, A.D.

1994-01-01

Simultaneous achievement of high energy confinement, τ E , and high plasma beta, β, leads to an economically attractive compact tokamak fusion reactor. High confinement enhancement, H τ E /τ E -ITER89P 4, and high normalized beta β N β/(I/aB) = 6%-m-T/MA. have been obtained in DIII-D experimental discharges. These improved confinement and/or improved stability limits are observed in several DIII-D high performance operational regimes: VH-mode, high l i H-mode, second stable core, and high beta poloidal. We have identified several important features of the improved performance in these discharges: details of the plasma shape, toroidal rotation or ExB flow profile, q profile and current density profile, and pressure profile. From our improved physics understanding of these enhanced performance regimes, we have developed operational scenarios which maintain the essential features of the improved confinement and which increase the stability limits using localized current profile control. The stability limit is increased by modifying the interior safety factor profile to be nonmonotonic with high central q, while maintaining the edge current density consistent with the improved transport regimes and the high edge bootstrap current. We have calculated high beta equilibria with β N 6.5, stable to ideal n=1 kinks and stable to ideal ballooning modes. The safety factor at the 95% flux surface is 6, the central q value is 3.9 and the minimum in q is 2.6. The current density profile is maintained by the natural profile of the bootstrap current, and a modest amount of electron cyclotron current drive. (Author)

Optimized profiles for improved confinement and stability in the DIII-D tokamak

International Nuclear Information System (INIS)

Taylor, T.S.; St. John, H.; Turnbull, A.D.

1995-02-01

Simultaneous achievement of high energy confinement, τ E , and high plasma beta, β, leads to an economically attractive compact tokamak fusion reactor. High confinement enhancement, H = τ E /τ E-ITER89P = 4, and high normalized beta β N = β/(I/aB) = 6%-m-T/MA, have been obtained in DIII-D experimental discharges. These improved confinement and/or improved stability limits are observed in several DIII-D high performance operational regimes: VH-mode, high ell i H-mode, second stable core, and high beta poloidal. The authors have identified several important features of the improved performance in these discharges: details of the plasma shape, toroidal rotation or ExB flow profile, q profile and current density profile, and pressure profile. From the improved physics understanding of these enhanced performance regimes, they have developed operational scenarios which maintain the essential features of the improved confinement and which increase the stability limits using localized current profile control. The stability limit is increased by modifying the interior safety factor profile to be nonmonotonic with high central q, while maintaining the edge current density consistent with the improved transport regimes and the high edge bootstrap current. They have calculated high beta equilibria with β N = 6.5, stable to ideal n = 1 kinks and stable to ideal ballooning modes. The safety factor at the 95% flux surface is 6, the central q value is 3.9 and the minimum in q is 2.6. The current density profile is maintained by the natural profile of the bootstrap current, and a modest amount of electron cyclotron current drive

Postauthorization safety surveillance of ADVATE [antihaemophilic factor (recombinant), plasma/albumin-free method] demonstrates efficacy, safety and low-risk for immunogenicity in routine clinical practice.

Science.gov (United States)

Oldenburg, J; Goudemand, J; Valentino, L; Richards, M; Luu, H; Kriukov, A; Gajek, H; Spotts, G; Ewenstein, B

2010-11-01

  Postauthorization safety surveillance of factor VIII (FVIII) concentrates is essential for assessing rare adverse event incidence. We determined safety and efficacy of ADVATE [antihaemophilic factor (recombinant), plasma/albumin-free method, (rAHF-PFM)] during routine clinical practice. Subjects with differing haemophilia A severities and medical histories were monitored during 12 months of prophylactic and/or on-demand therapy. Among 408 evaluable subjects, 386 (95%) received excellent/good efficacy ratings for all on-demand assessments; the corresponding number for subjects with previous FVIII inhibitors was 36/41 (88%). Among 276 evaluable subjects receiving prophylaxis continuously in the study, 255 (92%) had excellent/good ratings for all prophylactic assessments; the corresponding number for subjects with previous FVIII inhibitors was 41/46 (89%). Efficacy of surgical prophylaxis was excellent/good in 16/16 evaluable procedures. Among previously treated patients (PTPs) with >50 exposure days (EDs) and FVIII≤2%, three (0.75%) developed low-titre inhibitors. Two of these subjects had a positive inhibitor history; thus, the incidence of de novo inhibitor formation in PTPs with FVIII≤2% and no inhibitor history was 1/348 (0.29%; 95% CI, 0.01-1.59%). A PTP with moderate haemophilia developed a low-titre inhibitor. High-titre inhibitors were reported in a PTP with mild disease (following surgery), a previously untreated patient (PUP) with moderate disease (following surgery) and a PUP with severe disease. The favourable benefit/risk profile of rAHF-PFM previously documented in prospective clinical trials has been extended to include a broader range of haemophilia patients, many of whom would have been ineligible for registration studies. © 2010 Blackwell Publishing Ltd.

Wellness Centers in Slovenia: Tourists’ Profiles and Motivational Factors

Directory of Open Access Journals (Sweden)

Milica Rančić

2014-04-01

Full Text Available Wellness and spa tourism has increasingly become an important economic and marketing strategy for hoteliers, resorts and tourist destinations to attract tourist visitations. Deep understanding of consumer profiles and their key motivations within this context is vital in order to sustain the growth of wellness and spa tourism business. This paper presents an exploratory study that seeks to understand the spa and wellness tourists’ motivation during their visits to spa and wellness service centers in Slovenia. The purpose of this research is to examine the characteristics of a healthy-living market segment and its motivational behavior to wellness facilities in Slovenia. The paper provides the broad understanding of wellness and spa tourists’ profiles in Slovenia and the key motivation factors

Safety profiles of Tripterygium wilfordii Hook F: a systematic review and meta-analysis

Directory of Open Access Journals (Sweden)

Chi Zhang

2016-11-01

Full Text Available Objective: Tripterygium wilfordii Hook F (TwHF is a widely used and effective treatment for inflammatory diseases. There have been concerns about its toxicity but no adequate synthesis of the evidence for adverse events (AEs. We aimed to undertake a clinically informative, systematic safety profile of TwHF.Methods: We undertook a systematic review and meta-analysis of experimental studies and observational studies. We searched electronic databases and conference abstracts. Safety outcomes were rates of common AEs. Results: We screened 4,137 abstracts for eligibility and included 594 studies in the analysis. The overall incidence of AEs was 26.7% (95% CI 24.8%, 28.8% in 23,256 TwHF users. The estimates did vary markedly when stratified by specific study types. The incidence of gastrointestinal symptoms, adverse reproductive outcomes, adverse skin reactions, hematologic events and cardiovascular events were 13.3% (95%CI 11.9%, 14.9%, 11.7% (95% CI 10.3%, 13.3%, 7.8% (95%CI 6.3%-9.5%, 6.5% (95%CI 5.7%-7.4% and 4.9% (95%CI 1.6%, 14.3%, respectively. The prevalence of irregular menstruation (IM was increased in patients taking TwHF compared with those given control (odds ratio [OR] 4.65, 95% CI 3.08 to 7.03. TwHF use has lower risk of weight gain (OR 0.12 [95%CI 0.04 to 0.39] and hair loss (OR 0.37 [95% CI 0.18 to 0.78]. Furthermore, long-term aspirin use (> 6 months has a higher AEs incidence (31.0% [95% CI 24.5%-38.5%].Conclusion: Our findings suggest that more than one in four patients who were taking TwHF had experienced AEs. A clear need exists for improved understanding of contributing risk factors, as well as of prevention and management strategies to improve patients' tolerance for TwHF.

[Human factors and crisis resource management: improving patient safety].

Science.gov (United States)

Rall, M; Oberfrank, S

2013-10-01

A continuing high number of patients suffer harm from medical treatment. In 60-70% of the cases the sources of harm can be attributed to the field of human factors (HFs) and teamwork; nevertheless, those topics are still neither part of medical education nor of basic and advanced training even though it has been known for many years and it has meanwhile also been demonstrated for surgical specialties that training in human factors and teamwork considerably reduces surgical mortality.Besides the medical field, the concept of crisis resource management (CRM) has already proven its worth in many other industries by improving teamwork and reducing errors in the domain of human factors. One of the best ways to learn about CRM and HFs is realistic simulation team training with well-trained instructors in CRM and HF. The educational concept of the HOTT (hand over team training) courses for trauma room training offered by the DGU integrates these elements based on the current state of science. It is time to establish such training for all medical teams in emergency medicine and operative care. Accompanying safety measures, such as the development of a positive culture of safety in every department and the use of effective critical incident reporting systems (CIRs) should be pursued.

Genomic and Metabolomic Profile Associated to Clustering of Cardio-Metabolic Risk Factors.

Science.gov (United States)

Marrachelli, Vannina G; Rentero, Pilar; Mansego, María L; Morales, Jose Manuel; Galan, Inma; Pardo-Tendero, Mercedes; Martinez, Fernando; Martin-Escudero, Juan Carlos; Briongos, Laisa; Chaves, Felipe Javier; Redon, Josep; Monleon, Daniel

2016-01-01

To identify metabolomic and genomic markers associated with the presence of clustering of cardiometabolic risk factors (CMRFs) from a general population. One thousand five hundred and two subjects, Caucasian, > 18 years, representative of the general population, were included. Blood pressure measurement, anthropometric parameters and metabolic markers were measured. Subjects were grouped according the number of CMRFs (Group 1: profile was assessed by 1H NMR spectra using a Brucker Advance DRX 600 spectrometer. From the total population, 1217 (mean age 54±19, 50.6% men) with high genotyping call rate were analysed. A differential metabolomic profile, which included products from mitochondrial metabolism, extra mitochondrial metabolism, branched amino acids and fatty acid signals were observed among the three groups. The comparison of metabolomic patterns between subjects of Groups 1 to 3 for each of the genotypes associated to those subjects with three or more CMRFs revealed two SNPs, the rs174577_AA of FADS2 gene and the rs3803_TT of GATA2 transcription factor gene, with minimal or no statistically significant differences. Subjects with and without three or more CMRFs who shared the same genotype and metabolomic profile differed in the pattern of CMRFS cluster. Subjects of Group 3 and the AA genotype of the rs174577 had a lower prevalence of hypertension compared to the CC and CT genotype. In contrast, subjects of Group 3 and the TT genotype of the rs3803 polymorphism had a lower prevalence of T2DM, although they were predominantly males and had higher values of plasma creatinine. The results of the present study add information to the metabolomics profile and to the potential impact of genetic factors on the variants of clustering of cardiometabolic risk factors.

Integration profile and safety of an adenovirus hybrid-vector utilizing hyperactive sleeping beauty transposase for somatic integration.

Directory of Open Access Journals (Sweden)

Wenli Zhang

Full Text Available We recently developed adenovirus/transposase hybrid-vectors utilizing the previously described hyperactive Sleeping Beauty (SB transposase HSB5 for somatic integration and we could show stabilized transgene expression in mice and a canine model for hemophilia B. However, the safety profile of these hybrid-vectors with respect to vector dose and genotoxicity remains to be investigated. Herein, we evaluated this hybrid-vector system in C57Bl/6 mice with escalating vector dose settings. We found that in all mice which received the hyperactive SB transposase, transgene expression levels were stabilized in a dose-dependent manner and that the highest vector dose was accompanied by fatalities in mice. To analyze potential genotoxic side-effects due to somatic integration into host chromosomes, we performed a genome-wide integration site analysis using linker-mediated PCR (LM-PCR and linear amplification-mediated PCR (LAM-PCR. Analysis of genomic DNA samples obtained from HSB5 treated female and male mice revealed a total of 1327 unique transposition events. Overall the chromosomal distribution pattern was close-to-random and we observed a random integration profile with respect to integration into gene and non-gene areas. Notably, when using the LM-PCR protocol, 27 extra-chromosomal integration events were identified, most likely caused by transposon excision and subsequent transposition into the delivered adenoviral vector genome. In total, this study provides a careful evaluation of the safety profile of adenovirus/Sleeping Beauty transposase hybrid-vectors. The obtained information will be useful when designing future preclinical studies utilizing hybrid-vectors in small and large animal models.

Assessment of NPP safety taking into account seismic and engineering-geological factors

International Nuclear Information System (INIS)

Yakovlev, E.A.

1990-01-01

Consideration is given to the problem of probabilistic analysis of NPP safety with account of risk of destructive effect of earthquakes and the danger of accidental geological processes (diapirism, karst etc.) under NPP operation. It is shown that account of seismic and engineering-geological (engineering-seismological) risk factors in probabilistic analysis of safety enables to perform anticipatory analysis of behaviour of principle plant objects and to improve safety of their operation by revealing the most unstable elements of geotechnical system forming the main contribution to the total NPP risk

Safety, Efficacy, and Patient Acceptability of Everolimus in the Treatment of Breast Cancer.

Science.gov (United States)

Lousberg, Laurence; Jerusalem, Guy

2016-01-01

Everolimus combined with exemestane is an important treatment option for patients suffering from estrogen receptor-positive, human epidermal growth factor receptor 2-negative, advanced breast cancer (ABC) who have been previously treated with a nonsteroidal aromatase inhibitor (NSAI). After presentation of phase III registration trial BOLERO-2, several phase IIIb trials have been started to evaluate this regimen in a more real-world setting. Here, we review the efficacy and safety data published or presented at selected international meetings. These studies confirmed the outcome observed in the BOLERO-2 trial. Patient acceptance rate is also discussed by focusing on the permanent everolimus discontinuation rate in these trials. Factors influencing the safety profile are also reported, including the impact of age. The optimal sequence of combined therapy approaches associating targeted and endocrine therapy (ET) has yet to be determined as new treatment options such as cyclin-dependent kinase inhibitors become available. However, everolimus-exemestane remains an important treatment option with a major impact on progression-free survival (PFS) and an acceptable safety profile.

Research on Safety Factor of Dam Slope of High Embankment Dam under Seismic Condition

Directory of Open Access Journals (Sweden)

Li Bin

2015-01-01

Full Text Available With the constant development of construction technology of embankment dam, the constructed embankment dam becomes higher and higher, and the embankment dam with its height over 200m will always adopt the current design criteria of embankment dam only suitable for the construction of embankment dam lower than 200m in height. So the design criteria of high embankment dam shall be improved. We shall calculate the stability and safety factors of dam slope of high embankment dam under different dam height, slope ratio and different seismic intensity based on ratio of safety margin, and clarify the change rules of stability and safety factors of dam slope of high embankment dam with its height over 200m. We calculate the ratio of safety margin of traditional and reliable method by taking the stable, allowable and reliability index 4.2 of dam slope of high embankment dam with its height over 200m as the standard value, and conduct linear regression for both. As a result, the conditions, where 1.3 is considered as the stability and safety factors of dam slope of high embankment dam with its height over 200m under seismic condition and 4.2 as the allowable and reliability index, are under the same risk control level.

Power profiling of Cholesky and QR factorizations on distributed memory systems

KAUST Repository

Bosilca, George; Ltaief, Hatem; Dongarra, Jack

2012-01-01

with a dynamic distributed scheduler (DAGuE) to leverage distributed memory systems. We present performance results (Gflop/s) as well as the power profile (Watts) of two common dense factorizations needed to solve linear systems of equations, namely

Gadobutrol for contrast-enhanced magnetic resonance imaging in elderly patients: review of the safety profile from clinical trial, post-marketing surveillance, and pharmacovigilance data.

Science.gov (United States)

Endrikat, J; Schwenke, C; Prince, M R

2015-07-01

To assess the safety of gadobutrol administration in elderly patients (≥65 years) by comparing the incidence of adverse drug reactions (ADRs) following gadobutrol-enhanced magnetic resonance imaging (MRI) procedures in elderly patients with that in adults aged 18-64 years. Safety data on gadobutrol administration from clinical trials, post-marketing surveillance (PMS) studies, and pharmacovigilance reports were collected in three databases. In each dataset, absolute and relative frequencies of ADRs between age groups were analysed, along with odds ratios and 95% confidence intervals. Logistic regression was used to identify significant influencing factors on ADRs in the PMS and pharmacovigilance data. Rates of reported ADRs were lower in elderly patients versus adults aged statistically significant for the clinical trials and pharmacovigilance populations, with a trend in the PMS database. Serious ADRs occurred infrequently in the clinical trials and PMS populations (too low for statistical comparison), and pharmacovigilance data demonstrated a low incidence (<0.005%) in both age groups. This evaluation involving three large databases demonstrated no greater incidence of ADRs following gadobutrol-enhanced MRI in elderly patients (≥65 years) compared with younger adults, with gadobutrol having a favourable safety profile in both age groups. Copyright © 2015 The Royal College of Radiologists. All rights reserved.

Human factors evaluation of man-machine interface for periodic safety review of nuclear power plants

International Nuclear Information System (INIS)

Lee, Yong Hee; Lee, Jung Woon; Park, Jae Chang; Hwang, In Koo; Lee, Hyun Cheol; Jang, Tong Il; Ku, Jin Young; Kim, Soo Jin

2004-12-01

This report describes the research results of human factors assessment on the MMI(Man Machine Interface) equipment as part of Periodic Safety Review(PSR) of Nuclear Power Plants(NPPs). As MMI is a key factor among human factors to be reviewed in PSR, we reviewed the MMI components of nuclear power plants in aspect of human factors engineering. The availability, suitability, and effectiveness of the MMI devices were chosen to be reviewed. The MMI devices were investigated through the review of design documents related to the MMI, survey of control panels, evaluation of experts, and experimental assessment. Checklists were used to perform this assessment and record the review results. The items mentioned by the expert comments to review in detail in relation with task procedures were tested by experiments with operators' participation. For some questionable issues arisen during this MMI review, operator workload and possibility of errors in operator actions were analysed. The reviewed MMI devices contain MCR(Main Control Room), SPDS(Safety Parameter Display System), RSP(Remote Shutdown Panel), and the selected LCBs(Local Control Boards) importantly related to safety. As results of the assessments, any significant problem challenging the safety was not found on human factors in the MMI devices. However, several small items to be changed and improved in suitability of MMI devices were discovered. An action plan is recommended to accommodate the suggestions and review comments. It will enhance the plant safety on MMI area

Simplified probabilistic approach to determine safety factors in deterministic flaw acceptance criteria

International Nuclear Information System (INIS)

Barthelet, B.; Ardillon, E.

1997-01-01

The flaw acceptance rules in nuclear components rely on deterministic criteria supposed to ensure the safe operating of plants. The interest of having a reliable method of evaluating the safety margins and the integrity of components led Electricite de France to launch a study to link safety factors with requested reliability. A simplified analytical probabilistic approach is developed to analyse the failure risk in Fracture Mechanics. Assuming lognormal distributions of the main random variables, it is possible considering a simple Linear Elastic Fracture Mechanics model, to determine the failure probability as a function of mean values and logarithmic standard deviations. The 'design' failure point can be analytically calculated. Partial safety factors on the main variables (stress, crack size, material toughness) are obtained in relation with reliability target values. The approach is generalized to elastic plastic Fracture Mechanics (piping) by fitting J as a power law function of stress, crack size and yield strength. The simplified approach is validated by detailed probabilistic computations with PROBAN computer program. Assuming reasonable coefficients of variations (logarithmic standard deviations), the method helps to calibrate safety factors for different components taking into account reliability target values in normal, emergency and faulted conditions. Statistical data for the mechanical properties of the main basic materials complement the study. The work involves laboratory results and manufacture data. The results of this study are discussed within a working group of the French in service inspection code RSE-M. (authors)

Safety Profile of the Newest Antiepileptic Drugs: A Curated Literature Review.

Science.gov (United States)

Palleria, Caterina; Cozza, Giuseppe; Khengar, Rajeshree; Libri, Vincenzo; De Sarro, Giovambattista

2017-01-01

Despite the introduction of new antiepileptic drugs (AEDs), the quality of life and therapeutic response for patients with epilepsy remain unsatisfactory. In addition, whilst several antiepileptic drugs (AEDs) have been approved and consequently marketed in recent years, little is known about their long-term safety and tolerability. Availability of the newest AEDs, characterized by improved pharmacokinetic profiles, has positively impacted the treatment approach for patients with partial seizures in clinical practice. However, the main cause of treatment failure is still poor patient compliance due to the occurrence of adverse drug reactions (ADRs) that lead to treatment withdrawal in about 25% of cases before achieving maximal efficacy, and is associated with increasing health care costs. In this Review, we conducted an online database search using Medline, PubMed, Embase, and the Cochrane Online Library to review the available studies highlighting the clinical relevance of side effects, pharmacological interactions, safety and tolerability of the newest AEDs: Brivaracetam (BRV), Cannabidiol (CBD), Eslicarbazepine acetate (ESL), Lacosamide (LCM), and Perampanel (PER). The principal benefit of the newest AEDs, in addition to reduced frequency and seizure severity, is the low number and severity of ADRs reported compared to more historic drugs. Early detection of ADRs could lead to an improvement in patients' quality of life, therefore it is important to monitor ADRs and to adequately perform post marketing surveillance in the clinical practice setting. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

The human factor in the organisation and regulation of nuclear safety

International Nuclear Information System (INIS)

Bordes, F.; Savagner, J.-M.; Snanoudj, G.

1981-10-01

The TMI accident has brought to light the importance of the human factor in the safe operation of complex installations such as nuclear power plants. On this basis, the paper outlines the institutional framework for nuclear safety in France and reports on EDF practices in human resources management as well as in the improvement of working premises (control rooms) to optimize human behaviour in accident conditions. Finally, the interaction of labour laws on nuclear law in connection with safety is described. (NEA) [fr

Evaluation of design safety factors for time-dependent buckling

International Nuclear Information System (INIS)

Stone, C.M.; Nickell, R.E.

1977-02-01

The ASME Boiler and Pressure Vessel Code rules concerning time-dependent (creep) buckling for Class 1 nuclear components have recently been changed. Previous requirements for a factor of ten on service life have been replaced with a factor of safety of 1.5 on loading for load-controlled buckling. This report examines the supposed equivalence of the two rules from the standpoint of materials behavior--specifically, the secondary creep strain rate exponent. The comparison is made using results obtained numerically for an axially-loaded, cylindrical shell with varying secondary creep exponents. A computationally efficient scheme for analyzing creep buckling problems is also presented

Long-term safety profile of belimumab plus standard therapy in patients with systemic lupus erythematosus.

Science.gov (United States)

Merrill, Joan T; Ginzler, Ellen M; Wallace, Daniel J; McKay, James D; Lisse, Jeffrey R; Aranow, Cynthia; Wellborne, Frank R; Burnette, Michael; Condemi, John; Zhong, Z John; Pineda, Lilia; Klein, Jerry; Freimuth, William W

2012-10-01

To evaluate the safety profile of long-term belimumab therapy combined with standard therapy for systemic lupus erythematosus (SLE) in patients with active disease. Patients who were randomized to receive intravenous placebo or belimumab 1, 4, or 10 mg/kg, plus standard therapy, and completed the initial 52-week double-blind treatment period were then allowed to enter a 24-week open-label extension phase. During the extension period, patients in the belimumab group either received the same dose or were switched to 10 mg/kg and patients in the placebo group were switched to belimumab 10 mg/kg. Patients who achieved a satisfactory response during the 24-week extension period were allowed to participate in the long-term continuation study of monthly belimumab 10 mg/kg. Adverse events (AEs) and abnormal laboratory results were analyzed per 100 patient-years in 1-year intervals. Of the 364 patients who completed the 52-week double-blind treatment period, 345 entered the 24-week extension, and 296 continued treatment with belimumab in the long-term continuation study. Safety data through 4 years of belimumab exposure (1,165 cumulative patient-years) are reported. Incidence rates of AEs, severe/serious AEs, infusion reactions, infections, malignancies, grades 3/4 laboratory abnormalities, and discontinuations due to AEs were stable or declined during 4-year belimumab exposure. The most common AEs included arthralgia, upper respiratory tract infection, headache, fatigue, and nausea. Serious infusion reactions were rare: only 1 occurred during the 4-year followup period. Rates of serious infection decreased from 5.9/100 patient-years to 3.4/100 patient-years, and no specific type of infection predominated. Belimumab added to standard therapy was generally well-tolerated over the 4-year treatment period in patients with SLE, which suggests that belimumab can be administered long term with an acceptable safety profile. Copyright © 2012 by the American College of Rheumatology.

Nonclinical Safety Assessment of Anti-Factor D: Key Strategies and Challenges for the Nonclinical Development of Intravitreal Biologics.

Science.gov (United States)

Bantseev, Vladimir; Erickson, Rebecca; Leipold, Douglas; Amaya, Caroline; Miller, Paul E; Booler, Helen; Thackaberry, Evan A

The nonclinical toxicology program described here was designed to characterize the safety profile of anti-factor D (AFD; FCFD4514S, lampalizumab) to support intravitreal (ITV) administration in patients with geographic atrophy (GA). The toxicity of AFD was assessed in a single-dose and 6-month repeat-dose study in monkeys at doses up to 10 mg/eye. Toxicity was assessed by clinical ophthalmic examinations, intraocular pressure measurements, ocular photography, electroretinography, fluorescein angiography, optical coherence tomography, and anatomic pathology. Systemic exposure to AFD generally increased with the increase in dose level. The increases in mean maximal concentration and area under the curve values were roughly dose proportional. No accumulation of AFD was observed following 10 doses, and drug exposures were not affected by anti-drug antibodies. AFD was locally and systemically well tolerated in monkeys following ITV doses of up to 10 mg/eye. Ocular effects associated with AFD were limited to transient, reversible, dose-related, aqueous cell responses and injection-related, mild, vitreal cell responses. In the 6-month repeat-dose study, 2 monkeys had a nonspecific immune response to AFD that resulted in severe ocular inflammation, attributed to administration of a heterologous (humanized) protein. The comprehensive toxicology program in monkeys described here was designed to evaluate the safety profile of AFD and to support multiple ITV injections in the clinic. Administration of a heterologous (humanized) protein presents a challenge, and immunogenicity in nonclinical species is not predictive of immunogenicity in humans. Taken together, the results of the nonclinical program described here support the use of AFD in patients with GA.

Proposal of criteria for evaluation of engineering safety factors of VVER core parameters

International Nuclear Information System (INIS)

Shishkov, L.; Tsyganov, S.; Dementiev, V.

2009-01-01

The paper states that the regulatory documentation, as a rule, do not give explicit recommendations on formation techniques of engineering safety factors for design limited parameters of normal operation (K eng ). The AER countries use different approaches to K eng evaluation (sometimes even one country in relation of various power units). The paper suggests the development of uniform rules to be used in calculation of engineering safety factor for all VVER reactors. The paper presents principal problems that must be solved in the course of the discussion, and in the form of an exercise suggests the way of their solution. (authors)

Proposal of criteria for evaluation of engineering safety factors of WWER core parameters

International Nuclear Information System (INIS)

Shishkov, L.; Tsyganov, S.; Dementiev, V.

2009-01-01

The paper states that the regulatory documentation, as a rule, do not give explicit recommendations on formation techniques of engineering safety factors for design limited parameters of normal operation. The AER countries use different approaches to evaluation (sometimes even one country in relation of various power units). The paper suggests the development of uniform rules to be used in calculation of engineering safety factor for all WWER reactors. The paper presents principal problems that must be solved in the course of the discussion, and in the form of an exercise suggests the way of their solution. (Authors)

Application of the AHP method to analyze the significance of the factors affecting road traffic safety

Directory of Open Access Journals (Sweden)

Justyna SORDYL

2015-06-01

Full Text Available Over the past twenty years, the number of vehicles registered in Poland has grown rapidly. At the same time, a relatively small increase in the length of the road network has been observed. As a result of the limited capacity of available infrastructure, it leads to significant congestion and to increase of the probability of road accidents. The overall level of road safety depends on many factors - the behavior of road users, infrastructure solutions and the development of automotive technology. Thus the detailed assessment of the importance of individual elements determining road safety is difficult. The starting point is to organize the factors by grouping them into categories which are components of the DVE system (driver - vehicle - environment. In this work, to analyze the importance of individual factors affecting road safety, the use of analytic hierarchy process method (AHP was proposed. It is one of the multi-criteria methods which allows us to perform hierarchical analysis of the decision process, by means of experts’ opinions. Usage of AHP method enabled us to evaluate and rank the factors affecting road safety. This work attempts to link the statistical data and surveys in significance analysis of the elements determining road safety.

Preparation of the requirements for the safety regulation related to human and organizational factors

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

The outline of the project in the current fiscal year is to investigate and analyze issues associated with Human and Organizational Factors involved in incidents of nuclear facilities, and to study and develop evaluation methods of these countermeasures. The guideline to evaluate licensee's safety culture and root cause analysis (RCA) had been developed for further improving safety on nuclear power plants at 2007. These guidelines have been used at regulatory inspection since that time. Based on experience of using these existing guidelines, some activities for improving guidelines are now under investigation; these are selecting candidate quantitative indicators for safety culture evaluation and researching good practices for RCA issues. JNES implemented human factor analysis about 18 domestic events including the Fukushima Dai-ichi nuclear power plant accident. (author)

75 FR 69912 - Pipeline Safety: Control Room Management/Human Factors

Science.gov (United States)

2010-11-16

... 192 and 195 [Docket ID PHMSA-2007-27954] RIN 2137-AE64 Pipeline Safety: Control Room Management/Human... Control Room Management/Human Factors rule at 49 CFR 192.631 and 195.446. The NPRM proposes to expedite... rule and to engage in open discussions with the agency at PHMSA's Control Room Management...

Cultural factors influencing safety need to be addressed in design and operation of technology.

Science.gov (United States)

Meshkati, N

1996-10-01

Cultural factors which influence aviation safety in aircraft design, air traffic control, and human factors training are examined. Analysis of the Avianca Flight 052 crash in New York in January, 1990, demonstrates the catastrosphic effects cultural factors can play. Cultural factors include attitude toward work and technology, organizational hierarchy, religion, and population stereotyping.

Factors that impact on the safety of patient handovers: An interview study

DEFF Research Database (Denmark)

Siemsen, Inger Margrete; Madsen, Marlene Dyrløv; Pedersen, Lene Funck

2012-01-01

Aims: Improvement of clinical handover is fundamental to meet the challenges of patient safety. The primary aim of this interview study is to explore healthcare professionals’ attitudes and experiences with critical episodes in patient handover in order to elucidate factors that impact on handover...... from ambulance to hospitals and within and between hospitals. The secondary aim is to identify possible solutions to optimise handovers, defined as “situations where the professional responsibility for some or all aspects of a patient’s diagnosis, treatment or care is transferred to another person...... on patient safety in handover situations: communication, information, organisation, infrastructure, professionalism, responsibility, team awareness, and culture. Conclusions: The eight factors identified indicate that handovers are complex situations. The organisation did not see patient handover...

Risk factors for fishermen's health and safety in Greece

DEFF Research Database (Denmark)

Frantzeskou, Elpida; Kastania, Anastasia N; Riza, Elena

2012-01-01

Background: This is, to the best of our knowledge, the first occupational health study in Greek fishing. Aim: The aim of the study is to determine the risks for health and safety in Greek fisheries workers by exploring their health status and the health risk factors present in their occupational...... injury, of which half caused more than one day absence, while 14% had a near drowning experience. The health risks factors studied include excessive weight, cardiovascular incidents and dermatological, musculoskeletal, respiratory, hearing, stress, and anxiety problems. The occupational health risk...... factors include alcohol, fatty food consumption, smoking, and lack of physical exercise. Conclusions: The health effects observed are causally related to diet, smoking, and exercise, which in turn relate to the specific working conditions and culture in small-scale fishing that need to be taken...

Hazard Management Dealt by Safety Professionals in Colleges: The Impact of Individual Factors

Directory of Open Access Journals (Sweden)

Tsung-Chih Wu

2016-12-01

Full Text Available Identifying, evaluating, and controlling workplace hazards are important functions of safety professionals (SPs. The purpose of this study was to investigate the content and frequency of hazard management dealt by safety professionals in colleges. The authors also explored the effects of organizational factors/individual factors on SPs’ perception of frequency of hazard management. The researchers conducted survey research to achieve the objective of this study. The researchers mailed questionnaires to 200 SPs in colleges after simple random sampling, then received a total of 144 valid responses (response rate = 72%. Exploratory factor analysis indicated that the hazard management scale (HMS extracted five factors, including physical hazards, biological hazards, social and psychological hazards, ergonomic hazards, and chemical hazards. Moreover, the top 10 hazards that the survey results identified that safety professionals were most likely to deal with (in order of most to least frequent were: organic solvents, illumination, other chemicals, machinery and equipment, fire and explosion, electricity, noise, specific chemicals, human error, and lifting/carrying. Finally, the results of one-way multivariate analysis of variance (MANOVA indicated there were four individual factors that impacted the perceived frequency of hazard management which were of statistical and practical significance: job tenure in the college of employment, type of certification, gender, and overall job tenure. SPs within colleges and industries can now discuss plans revolving around these five areas instead of having to deal with all of the separate hazards.

Stationary density profiles in the Alcator C-mod tokamak

International Nuclear Information System (INIS)

Kesner, J.; Ernst, D.; Hughes, J.; Mumgaard, R.; Shiraiwa, S.; Whyte, D.; Scott, S.

2012-01-01

In the absence of an internal particle source, plasma turbulence will impose an intrinsic relationship between an inwards pinch and an outwards diffusion resulting in a stationary density profile. The Alcator C-mod tokamak utilizes RF heating and current drive so that fueling only occurs in the vicinity of the separatrix. Discharges that transition from L-mode to I-mode are seen to maintain a self-similar stationary density profile as measured by Thomson scattering. For discharges with negative magnetic shear, an observed rise of the safety factor in the vicinity of the magnetic axis appears to be accompanied by a decrease of electron density, qualitatively consistent with the theoretical expectations.

The Effects of Occupational Health and Safety Risk Factors on Job Satisfaction in Hotel Enterprises

OpenAIRE

Gonca Kilic; Murat Selim Selvi

2009-01-01

Occupational health and safety risk factors can have direct or indirect effects on levels of organizational commitment, job satisfaction, and the job productivity of workers in service companies as well as other types of industries. In this paper, the effects of physical, biological, chemical and socio-psychological risk factors, related to occupational safety and health, encountered in hotel enterprises on job satisfaction were investigated. Questionnaire survey was conducted as a data colle...

Missing focus on Human Factors - organizational and cognitive ergonomics - in the safety management for the petroleum industry.

Science.gov (United States)

Johnsen, Stig O; Kilskar, Stine Skaufel; Fossum, Knut Robert

2017-08-01

More attention has recently been given to Human Factors in petroleum accident investigations. The Human Factors areas examined in this article are organizational, cognitive and physical ergonomics. A key question to be explored is as follows: To what degree are the petroleum industry and safety authorities in Norway focusing on these Human Factors areas from the design phase? To investigate this, we conducted an innovative exploratory study of the development of four control centres in Norwegian oil and gas industry in collaboration between users, management and Human Factors experts. We also performed a literature survey and discussion with the professional Human Factors network in Norway. We investigated the Human Factors focus, reasons for not considering Human Factors and consequences of missing Human Factors in safety management. The results revealed an immature focus and organization of Human Factors. Expertise on organizational ergonomics and cognitive ergonomics are missing from companies and safety authorities and are poorly prioritized during the development. The easy observable part of Human Factors (i.e. physical ergonomics) is often in focus. Poor focus on Human Factors in the design process creates demanding conditions for human operators and impact safety and resilience. There is lack of non-technical skills such as communication and decision-making. New technical equipment such as Closed Circuit Television is implemented without appropriate use of Human Factors standards. Human Factors expertise should be involved as early as possible in the responsible organizations. Verification and validation of Human Factors should be improved and performed from the start, by certified Human Factors experts in collaboration with the workforce. The authorities should check-back that the regulatory framework of Human Factors is communicated, understood and followed.

Current density profile inside q=1 on Tore Supra

International Nuclear Information System (INIS)

Joffrin, E.; Desgranges, C.; Sabot, R.; Dubois, M.A.

1995-01-01

The Tore Supra polarimeter used to measure the poloidal field distribution is described. The current density profiles are computed in two different ways using the interferometric and polarimetric data in conjunction with the magnetic data and the location of the inversion radius determined by the soft X-ray camera. The current density inside the q=1 surface is investigated for normal and monster sawteeth. Its variation are also measured by the polarimeter and compared with that predicted by the current diffusion equation assuming complete reconnection. Finally, the safety factor profile is compared with that obtained with the striation data of the pellet ablation. The results of the evolution of the q profile during sawteeth are in good agreement with those obtained in other devices. (author) 9 refs.; 4 figs

Assessment of Factors Associated with the Safety Depth of GV15 Yamen

Directory of Open Access Journals (Sweden)

Park Soo-Jung

2014-03-01

Full Text Available Objectives: Yamen is the fifteenth acupoint of the Governor Vessel Meridian (GV15. It is anatomically close to the medulla oblongata, so finding the safety depth of the acupoint is very important. However, few studies on the safety depth of GV15 have been done. Methods: This study tried to measure the safety depth of GV15 by using magnetic resonance imaging (MRI scans and to analyze the factors affecting the safety depth through multiple regression analyses. This study was carried out for patients who had a brain MRI scan while visiting Jeonju Wonkwang Hospital, Korea. The shortest distance between the glabella and the occipital protuberance (DGO, the horizontal distance between the glabella and the back of the head (DGB and the dangerous depth (DD were measured from the sagittal views of the MRI images. The DD is the horizontal distance from the skin’s surface at GV15 to the spinal dura mater. Results: The model suggested that the safety depth (SD was significantly associated with gender (β = 0.474, P < 0.0001, DGO (β = 0.272, P = 0.027, and BMI (β = 0.249, P = 0.005 and the combination of three variables can explain the SD, with R2 = 0.571 (Table 3 A longer SD was associated with males and with greater BMI and DGO. Conclusion: This study suggests that gender, BMI and DGO may be important factors when the SD of GV15 is considered clinically through a multiple regression analysis of GV15.

Safety profile of solid lipid nanoparticles loaded with rosmarinic acid for oral use: in vitro and animal approaches

Directory of Open Access Journals (Sweden)

Madureira AR

2016-08-01

Full Text Available Ana Raquel Madureira,1 Sara Nunes,2 Débora A Campos,1 João C Fernandes,2 Cláudia Marques,3 Monica Zuzarte,2 Beatriz Gullón,1 Luís M Rodríguez-Alcalá,1 Conceição Calhau,3,4 Bruno Sarmento,5–7 Ana Maria Gomes,1 Maria Manuela Pintado,1 Flávio Reis2 1Catholic University of Portugal, CBQF – Center for Biotechnology and Fine Chemistry – Associate Laboratory, Faculty of Biotechnology, Porto, Portugal; 2Laboratory of Pharmacology and Experimental Therapeutics, Institute for Biomedical Imaging and Life Sciences (IBILI, Faculty of Medicine, and CNC.IBILI Consortium, University of Coimbra, Coimbra, Portugal; 3Department of Biochemistry, Faculty of Medicine, University of Porto, Porto, Portugal; 4Center for Health Technology and Services Research (CINTESIS, Porto, Portugal; 5Department of Pharmaceutical Sciences, Institute of Health Sciences-North, CESPU, Gandra, Portugal; 6“I3S” Instituto de Investigação e Inovação em Saúde, University of Porto, Porto, Portugal; 7INEB, Institute of Biomedical Engineering, University of Porto, Porto, Portugal Abstract: Rosmarinic acid (RA possesses several protective bioactivities that have attracted increasing interest by nutraceutical/pharmaceutical industries. Considering the reduced bioavailability after oral use, effective (and safe delivery systems are crucial to protect RA from gastrointestinal degradation. This study aims to characterize the safety profile of solid lipid nanoparticles produced with Witepsol and Carnauba waxes and loaded with RA, using in vitro and in vivo approaches, focused on genotoxicity and cytotoxicity assays, redox status markers, hematological and biochemical profile, liver and kidney function, gut bacterial microbiota, and fecal fatty acids composition. Free RA and sage extract, empty nanoparticles, or nanoparticles loaded with RA or sage extract (0.15 and 1.5 mg/mL were evaluated for cell (lymphocytes viability, necrosis and apoptosis, and antioxidant

Preadipocyte factor-1 is associated with metabolic profile in severe obesity.

LENUS (Irish Health Repository)

O'Connell, J

2011-04-01

Dysfunctional adipose tissue has been proposed as a key pathological process linking obesity and metabolic disease. Preadipocyte factor-1 (Pref-1) has been shown to inhibit differentiation in adipocyte precursor cells and could thereby play a role in determining adipocyte size, adipose tissue functioning, and metabolic profile in obese individuals.

Edge gradient and safety factor effects on electrostatic turbulent transport in tokamaks

International Nuclear Information System (INIS)

Tan, Ing Hwie.

1992-05-01

Electrostatic turbulence and transport measurements are performed on the Tokapole-II tokamak at the University of Wisconsin-Madison, as the safety-factor and the edge equilibrium gradients and varied substantially. Tokapole-II is a poloidal divertor tokamak capable of operating at a wide range of safety factors due to its unique magnetic limiter configuration. It also has retractable material limiters in a large scrape-off region, which permits the study of edge boundary conditions like density and temperature gradients. The turbulence is independent of safety factor, but strongly sensitive to the local density gradient, which itself depends upon the limiter configuration. When a material limiter is inserted in a high discharge, the density gradient is increased locally together with a local increase of the turbulence. On the other hand, limiter insertion in low discharges did not increase the density gradient as much and the turbulence properties are unchanged with respect to the magnetic limiter case. It is conducted then, that electrostatic turbulence is caused by the density gradient. Although the electrostatic fluctuation driven transport is enhanced in the large density gradient case, it is in all cases to small to explain the observed energy confinement times. To explore instabilities with small wavelengths, a 0.5 mm diameter shperical Langmuir probe was constructed, and its power compared with the power measured by larger cylindrical probes

Road safety performance indicators : country profiles. SafetyNet, Building the European Road Safety Observatory, Workpackage 3, Deliverable 3.7b.

NARCIS (Netherlands)

Riguelle, F. Eksler, V. Holló, P. Morsink, P. Gent, A. van Gitelman, V. Assum, T. & Rackliff, L.

2009-01-01

The EC 6th Framework Integrated Project SafetyNet aims to accelerate the availability and use of harmonised road safety data in Europe. Having such data available throughout Europe would be tremendously beneficial for road safety, since it would enable the evaluation of road safety measures, the

Five factor model personality traits relate to adult attention-deficit/hyperactivity disorder but not to their distinct neurocognitive profiles.

Science.gov (United States)

Van Dijk, Fiona E; Mostert, Jeannette; Glennon, Jeffrey; Onnink, Marten; Dammers, Janneke; Vasquez, Alejandro Arias; Kan, Cornelis; Verkes, Robbert Jan; Hoogman, Martine; Franke, Barbara; Buitelaar, Jan K

2017-12-01

Deficits in multiple neuropsychological domains and specific personality profiles have been observed in attention-deficit/hyperactivity disorder (ADHD). In this study we investigated whether personality traits are related to neurocognitive profiles in adults with ADHD. Neuropsychological performance and Five Factor Model (FFM) personality traits were measured in adults with ADHD (n = 133) and healthy controls (n = 132). Three neuropsychological profiles, derived from previous community detection analyses, were investigated for personality trait differences. Irrespective of cognitive profile, participants with ADHD showed significantly higher Neuroticism and lower Extraversion, Agreeableness, and Conscientiousness than healthy controls. Only the FFM personality factor Openness differed significantly between the three profiles. Higher Openness was more common in those with aberrant attention and inhibition than those with increased delay discounting and atypical working memory / verbal fluency. The results suggest that the personality trait Openness, but not any other FFM factor, is linked to neurocognitive profiles in ADHD. ADHD symptoms rather than profiles of cognitive impairment have associations with personality traits. Copyright © 2017 Elsevier B.V. All rights reserved.

Enhanced Phosphoproteomic Profiling Workflow For Growth Factor Signaling Analysis

DEFF Research Database (Denmark)

Sylvester, Marc; Burbridge, Mike; Leclerc, Gregory

2010-01-01

Background Our understanding of complex signaling networks is still fragmentary. Isolated processes have been studied extensively but cross-talk is omnipresent and precludes intuitive predictions of signaling outcomes. The need for quantitative data on dynamic systems is apparent especially for our...... understanding of pathological processes. In our study we create and integrate data on phosphorylations that are initiated by several growth factor receptors. We present an approach for quantitative, time-resolved phosphoproteomic profiling that integrates the important contributions by phosphotyrosines. Methods...

Modeling of passengers' safety perception for buses on mountainous roads.

Science.gov (United States)

Khoo, Hooi Ling; Ahmed, Muaid

2018-04-01

This study had developed a passenger safety perception model specifically for buses taking into consideration the various factors, namely driver characteristics, environmental conditions, and bus characteristics using Bayesian Network. The behaviour of bus driver is observed through the bus motion profile, measured in longitudinal, lateral, and vertical accelerations. The road geometry is recorded using GPS and is computed with the aid of the Google map while the perceived bus safety is rated by the passengers in the bus in real time. A total of 13 variables were derived and used in the model development. The developed Bayesian Network model shows that the type of bus and the experience of the driver on the investigated route could have an influence on passenger's perception of their safety on buses. Road geometry is an indirect influencing factor through the driver's behavior. The findings of this model are useful for the authorities to structure an effective strategy to improve the level of perceived bus safety. A high level of bus safety will definitely boost passenger usage confidence which will subsequently increase ridership. Copyright © 2018 Elsevier Ltd. All rights reserved.

The impact of masculinity on safety oversights, safety priority and safety violations in two male-dominated occupations

DEFF Research Database (Denmark)

Nielsen, Kent; Hansen, Claus D.; Bloksgaard, Lotte

2015-01-01

Background Although men have a higher risk of occupational injuries than women the role of masculinity for organizational safety outcomes has only rarely been the object of research. Aim The current study investigated the association between masculinity and safety oversights, safety priority......-related context factors (safety leadership, commitment of the safety representative, and safety involvement) and three safety-related outcome factors (safety violations, safety oversights and safety priority) were administered twice 12 months apart to Danish ambulance workers (n = 1157) and slaughterhouse workers...

Integrated approach to knowledge acquisition and safety management of complex plants with emphasis on human factors

International Nuclear Information System (INIS)

Kosmowski, K.T.

1998-01-01

In this paper an integrated approach to the knowledge acquisition and safety management of complex industrial plants is proposed and outlined. The plant is considered within a man-technology-environment (MTE) system. The knowledge acquisition is aimed at the consequent reliability evaluation of human factor and probabilistic modeling of the plant. Properly structured initial knowledge is updated in life-time of the plant. The data and knowledge concerning the topology of safety related systems and their functions are created in a graphical CAD system and are object oriented. Safety oriented monitoring of the plant includes abnormal situations due to external and internal disturbances, failures of hard/software components and failures of human factor. The operation and safety related evidence is accumulated in special data bases. Data/knowledge bases are designed in such a way to support effectively the reliability and safety management of the plant. (author)

Human factors engineering design review acceptance criteria for the safety parameter display

International Nuclear Information System (INIS)

McGevna, V.; Peterson, L.R.

1981-01-01

This report contains human factors engineering design review acceptance criteria developed by the Human Factors Engineering Branch (HFEB) of the Nuclear Regulatory Commission (NRC) to use in evaluating designs of the Safety Parameter Display System (SPDS). These criteria were developed in response to the functional design criteria for the SPDS defined in NUREG-0696, Functional Criteria for Emergency Response Facilities. The purpose of this report is to identify design review acceptance criteria for the SPDS installed in the control room of a nuclear power plant. Use of computer driven cathode ray tube (CRT) displays is anticipated. General acceptance criteria for displays of plant safety status information by the SPDS are developed. In addition, specific SPDS review criteria corresponding to the SPDS functional criteria specified in NUREG-0696 are established

Human factors and fuzzy set theory for safety analysis

International Nuclear Information System (INIS)

Nishiwaki, Y.

1987-01-01

Human reliability and performance is affected by many factors: medical, physiological and psychological, etc. The uncertainty involved in human factors may not necessarily be probabilistic, but fuzzy. Therefore, it is important to develop a theory by which both the non-probabilistic uncertainties, or fuzziness, of human factors and the probabilistic properties of machines can be treated consistently. In reality, randomness and fuzziness are sometimes mixed. From the mathematical point of view, probabilistic measures may be considered a special case of fuzzy measures. Therefore, fuzzy set theory seems to be an effective tool for analysing man-machine systems. The concept 'failure possibility' based on fuzzy sets is suggested as an approach to safety analysis and fault diagnosis of a large complex system. Fuzzy measures and fuzzy integrals are introduced and their possible applications are also discussed. (author)

Probabilistic safety assessment model in consideration of human factors based on object-oriented bayesian networks

International Nuclear Information System (INIS)

Zhou Zhongbao; Zhou Jinglun; Sun Quan

2007-01-01

Effect of Human factors on system safety is increasingly serious, which is often ignored in traditional probabilistic safety assessment methods however. A new probabilistic safety assessment model based on object-oriented Bayesian networks is proposed in this paper. Human factors are integrated into the existed event sequence diagrams. Then the classes of the object-oriented Bayesian networks are constructed which are converted to latent Bayesian networks for inference. Finally, the inference results are integrated into event sequence diagrams for probabilistic safety assessment. The new method is applied to the accident of loss of coolant in a nuclear power plant. the results show that the model is not only applicable to real-time situation assessment, but also applicable to situation assessment based certain amount of information. The modeling complexity is kept down and the new method is appropriate to large complex systems due to the thoughts of object-oriented. (authors)

Universal analytical scattering form factor for shell-, core-shell, or homogeneous particles with continuously variable density profile shape.

Science.gov (United States)

Foster, Tobias

2011-09-01

A novel analytical and continuous density distribution function with a widely variable shape is reported and used to derive an analytical scattering form factor that allows us to universally describe the scattering from particles with the radial density profile of homogeneous spheres, shells, or core-shell particles. Composed by the sum of two Fermi-Dirac distribution functions, the shape of the density profile can be altered continuously from step-like via Gaussian-like or parabolic to asymptotically hyperbolic by varying a single "shape parameter", d. Using this density profile, the scattering form factor can be calculated numerically. An analytical form factor can be derived using an approximate expression for the original Fermi-Dirac distribution function. This approximation is accurate for sufficiently small rescaled shape parameters, d/R (R being the particle radius), up to values of d/R ≈ 0.1, and thus captures step-like, Gaussian-like, and parabolic as well as asymptotically hyperbolic profile shapes. It is expected that this form factor is particularly useful in a model-dependent analysis of small-angle scattering data since the applied continuous and analytical function for the particle density profile can be compared directly with the density profile extracted from the data by model-free approaches like the generalized inverse Fourier transform method. © 2011 American Chemical Society

Safety, reliability, risk management and human factors: an integrated engineering approach applied to nuclear facilities

International Nuclear Information System (INIS)

Vasconcelos, Vanderley de; Silva, Eliane Magalhaes Pereira da; Costa, Antonio Carlos Lopes da; Reis, Sergio Carneiro dos

2009-01-01

Nuclear energy has an important engineering legacy to share with the conventional industry. Much of the development of the tools related to safety, reliability, risk management, and human factors are associated with nuclear plant processes, mainly because the public concern about nuclear power generation. Despite the close association between these subjects, there are some important different approaches. The reliability engineering approach uses several techniques to minimize the component failures that cause the failure of the complex systems. These techniques include, for instance, redundancy, diversity, standby sparing, safety factors, and reliability centered maintenance. On the other hand system safety is primarily concerned with hazard management, that is, the identification, evaluation and control of hazards. Rather than just look at failure rates or engineering strengths, system safety would examine the interactions among system components. The events that cause accidents may be complex combinations of component failures, faulty maintenance, design errors, human actions, or actuation of instrumentation and control. Then, system safety deals with a broader spectrum of risk management, including: ergonomics, legal requirements, quality control, public acceptance, political considerations, and many other non-technical influences. Taking care of these subjects individually can compromise the completeness of the analysis and the measures associated with both risk reduction, and safety and reliability increasing. Analyzing together the engineering systems and controls of a nuclear facility, their management systems and operational procedures, and the human factors engineering, many benefits can be realized. This paper proposes an integration of these issues based on the application of systems theory. (author)

Safety, reliability, risk management and human factors: an integrated engineering approach applied to nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

Vasconcelos, Vanderley de; Silva, Eliane Magalhaes Pereira da; Costa, Antonio Carlos Lopes da; Reis, Sergio Carneiro dos [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)], e-mail: vasconv@cdtn.br, e-mail: silvaem@cdtn.br, e-mail: aclc@cdtn.br, e-mail: reissc@cdtn.br

2009-07-01

Nuclear energy has an important engineering legacy to share with the conventional industry. Much of the development of the tools related to safety, reliability, risk management, and human factors are associated with nuclear plant processes, mainly because the public concern about nuclear power generation. Despite the close association between these subjects, there are some important different approaches. The reliability engineering approach uses several techniques to minimize the component failures that cause the failure of the complex systems. These techniques include, for instance, redundancy, diversity, standby sparing, safety factors, and reliability centered maintenance. On the other hand system safety is primarily concerned with hazard management, that is, the identification, evaluation and control of hazards. Rather than just look at failure rates or engineering strengths, system safety would examine the interactions among system components. The events that cause accidents may be complex combinations of component failures, faulty maintenance, design errors, human actions, or actuation of instrumentation and control. Then, system safety deals with a broader spectrum of risk management, including: ergonomics, legal requirements, quality control, public acceptance, political considerations, and many other non-technical influences. Taking care of these subjects individually can compromise the completeness of the analysis and the measures associated with both risk reduction, and safety and reliability increasing. Analyzing together the engineering systems and controls of a nuclear facility, their management systems and operational procedures, and the human factors engineering, many benefits can be realized. This paper proposes an integration of these issues based on the application of systems theory. (author)

Understanding human and organisational factors - Nuclear safety and at-risk organisations

International Nuclear Information System (INIS)

Bernard, Benoit

2014-01-01

This book addresses human and organisational factors which are present at different moments of the lifetime of an at-risk installation (from design to dismantling). At-risk organisations are considered as firstly human systems, and the objective is then to highlight individual and collective mechanisms in these organisations. Several questions are addressed, notably the origins of at-risk behaviour, and the reasons of the repetition of errors by these organisations. A first chapter, while referring to examples, addresses the human dimension of safety: human and organisational factors as obstacles, normal accidents (Three Mile Island), accidents in high-reliability organisations (Chernobyl), identification of root causes (Tokai-mura), and social-technical approach to safety (Fukushima). By also referring to examples, the second chapter addresses how to analyse at-risk organisations: individual behaviours (case of naval and air transport accidents), team coordination (a fire, the Challenger accident), and organisational regulation (organisations forms and routines, explosion of BP Texas City, explosion of Columbia)

The Impact of Organizational Factors on Safety. The Perspective of Experts from the Spanish Nuclear Sector

International Nuclear Information System (INIS)

German, S.; Silla, I.; Navajas, J.

2014-01-01

Previous research supports the importance of organizational factors on safety in high reliability organizations. This study aims to determine the impact of those factors in the Spanish nuclear sector. Particularly, this study focuses on examining the role of performance indicators, organizational culture, organizational factors, and organizational context. With that purpose, an electronic survey addressed to experts from the Spanish nuclear sector was carried out. Results showed that performance indicators are well-known among industry experts and are perceived as useful for improving performance. Behavioural norms that influence safety and some relevant factors that promote problem identification were identified. Additionally, findings suggested that organizational context must be taken into account to better understand the role of organizational culture. Moreover, industry experts pointed out organizational factors to be improved: organizational communication processes within the organization, positive reinforcement, and field supervisors practices. Finally, findings supported the influence of organizational context on safety. It is noteworthy the role of the social impact of international events (e.g., Chernobyl...), the relationship with the regulator and the legislative and governmental framework. (Author)

Fusion integral experiments and analysis and the determination of design safety factors - I: Methodology

International Nuclear Information System (INIS)

Youssef, M.Z.; Kumar, A.; Abdou, M.A.; Oyama, Y.; Maekawa, H.

1995-01-01

The role of the neutronics experimentation and analysis in fusion neutronics research and development programs is discussed. A new methodology was developed to arrive at estimates to design safety factors based on the experimental and analytical results from design-oriented integral experiments. In this methodology, and for a particular nuclear response, R, a normalized density function (NDF) is constructed from the prediction uncertainties, and their associated standard deviations, as found in the various integral experiments where that response, R, is measured. Important statistical parameters are derived from the NDF, such as the global mean prediction uncertainty, and the possible spread around it. The method of deriving safety factors from many possible NDFs based on various calculational and measuring methods (among other variants) is also described. Associated with each safety factor is a confidence level, designers may choose to have, that the calculated response, R, will not exceed (or will not fall below) the actual measured value. An illustrative example is given on how to construct the NDFs. The methodology is applied in two areas, namely the line-integrated tritium production rate and bulk shielding integral experiments. Conditions under which these factors could be derived and the validity of the method are discussed. 72 refs., 17 figs., 4 tabs

Safety and Feasibility of Lin- Cells Administration to ALS Patients: A Novel View on Humoral Factors and miRNA Profiles

Directory of Open Access Journals (Sweden)

Anna Sobuś

2018-04-01

Full Text Available Therapeutic options for amyotrophic lateral sclerosis (ALS are still limited. Great hopes, however, are placed in growth factors that show neuroprotective abilities (e.g., nerve growth factor (NGF, brain-derived neurotrophic factor (BDNF, and vascular endothelial growth factor (VEGF and in the immune modulating features, in particular, the anti-inflammatory effects. In our study we aimed to investigate whether a bone marrow-derived lineage-negative (Lin- cells population, after autologous application into cerebrospinal fluid (CSF, is able to produce noticeable concentrations of trophic factors and inflammatory-related proteins and thus influence the clinical course of ALS. To our knowledge, the evaluation of Lin- cells transplantation for ALS treatment has not been previously reported. Early hematopoietic Lin- cells were isolated from twelve ALS patients’ bone marrow, and later, the suspension of cells was administered into the subarachnoid space by lumbar puncture. Concentrations of selected proteins in the CSF and plasma were quantified by multiplex fluorescent bead-based immunoassays at different timepoints post-transplantation. We also chose microRNAs (miRNAs related to muscle biology (miRNA-1, miRNA-133a, and miRNA-206 and angiogenesis and inflammation (miRNA-155 and miRNA-378 and tested, for the first time, their expression profiles in the CSF and plasma of ALS patients after Lin- cells transplantation. The injection of bone marrow cells resulted in decreased concentration of selected inflammatory proteins (C3 after Lin- cells injection, particularly in patients who had a better clinical outcome. Moreover, several analyzed miRNAs have changed expression levels in the CSF and plasma of ALS patients subsequent to Lin- cells administration. Interestingly, the expression of miR-206 increased in ALS patients, while miR-378 decreased both in the CSF and plasma one month after the cells’ injection. We propose that autologous lineage

Safety and Feasibility of Lin- Cells Administration to ALS Patients: A Novel View on Humoral Factors and miRNA Profiles.

Science.gov (United States)

Sobuś, Anna; Baumert, Bartłomiej; Litwińska, Zofia; Gołąb-Janowska, Monika; Stępniewski, Jacek; Kotowski, Maciej; Pius-Sadowska, Ewa; Kawa, Miłosz P; Gródecka-Szwajkiewicz, Dorota; Peregud-Pogorzelski, Jarosław; Dulak, Józef; Nowacki, Przemysław; Machaliński, Bogusław

2018-04-27

Therapeutic options for amyotrophic lateral sclerosis (ALS) are still limited. Great hopes, however, are placed in growth factors that show neuroprotective abilities (e.g., nerve growth factor (NGF), brain-derived neurotrophic factor (BDNF), and vascular endothelial growth factor (VEGF)) and in the immune modulating features, in particular, the anti-inflammatory effects. In our study we aimed to investigate whether a bone marrow-derived lineage-negative (Lin-) cells population, after autologous application into cerebrospinal fluid (CSF), is able to produce noticeable concentrations of trophic factors and inflammatory-related proteins and thus influence the clinical course of ALS. To our knowledge, the evaluation of Lin- cells transplantation for ALS treatment has not been previously reported. Early hematopoietic Lin- cells were isolated from twelve ALS patients’ bone marrow, and later, the suspension of cells was administered into the subarachnoid space by lumbar puncture. Concentrations of selected proteins in the CSF and plasma were quantified by multiplex fluorescent bead-based immunoassays at different timepoints post-transplantation. We also chose microRNAs (miRNAs) related to muscle biology (miRNA-1, miRNA-133a, and miRNA-206) and angiogenesis and inflammation (miRNA-155 and miRNA-378) and tested, for the first time, their expression profiles in the CSF and plasma of ALS patients after Lin- cells transplantation. The injection of bone marrow cells resulted in decreased concentration of selected inflammatory proteins (C3) after Lin- cells injection, particularly in patients who had a better clinical outcome. Moreover, several analyzed miRNAs have changed expression levels in the CSF and plasma of ALS patients subsequent to Lin- cells administration. Interestingly, the expression of miR-206 increased in ALS patients, while miR-378 decreased both in the CSF and plasma one month after the cells’ injection. We propose that autologous lineage-negative early

The PSA of safety-critical digital I and C system: the determination of important factors and sensitivity analysis

International Nuclear Information System (INIS)

Kang, H. G.; Sung, T. Y.; Eom, H. S.; Jeong, H. S.; Park, J. K.; Lee, K. Y.; Park, J. K.

2002-01-01

This report is prepared to suggest a practical Probabilistic Safety Assessment (PSA) methodology of safety-critical digital instrumentation and control (I and C) systems. Even though conventional probabilistic safety assessment methods are immature for applying to microprocessor-based digital systems, practical needs force to apply it because the result of probabilistic safety assessment plays very important role in proving the safety of a designed system. Microprocessors and software technologies make the digital system very complex and hard to analyze the safety of their applications. The aim of this is: (1) To summarize the factors which should be represented by the model for probabilistic safety assessment and to propose a standpoint of evaluation for digital systems. (2) To quantitatively presents the results of a mathematical case study which examines the analysis framework of the safety of digital systems in the context of the PSA. (3) To show the results of a sensitivity study for some critical factors

Factors influencing workers to follow food safety management systems in meat plants in Ontario, Canada.

Science.gov (United States)

Ball, Brita; Wilcock, Anne; Aung, May

2009-06-01

Small and medium sized food businesses have been slow to adopt food safety management systems (FSMSs) such as good manufacturing practices and Hazard Analysis Critical Control Point (HACCP). This study identifies factors influencing workers in their implementation of food safety practices in small and medium meat processing establishments in Ontario, Canada. A qualitative approach was used to explore in-plant factors that influence the implementation of FSMSs. Thirteen in-depth interviews in five meat plants and two focus group interviews were conducted. These generated 219 pages of verbatim transcripts which were analysed using NVivo 7 software. Main themes identified in the data related to production systems, organisational characteristics and employee characteristics. A socio-psychological model based on the theory of planned behaviour is proposed to describe how these themes and underlying sub-themes relate to FSMS implementation. Addressing the various factors that influence production workers is expected to enhance FSMS implementation and increase food safety.

Rationalization of safety factors for breakwater design in hurricane-prone areas

NARCIS (Netherlands)

Tsimopoulou, V.; Kanning, W.; Verhagen, H.J.; Vrijling, J.K.

2011-01-01

This paper presents the development of a semi-probabilistic method for armour layer design of rubble mound breakwaters, which is based on the use of safety factors. The objective is to introduce an approach that is both attractive to designers and sufficiently reliable when a high degree of

PSA methodology including new design, operational and safety factors, 'Level of recognition of phenomena with a presumed dominant influence upon operational safety' (failures of conventional as well as non-conventional passive components, dependent failures, influence of operator, fires and external threats, digital control, organizational factors)

International Nuclear Information System (INIS)

Jirsa, P.

2001-10-01

The document represents a specific type of discussion of existing methodologies for the creation and application of probabilistic safety assessment (PSA) in light of the EUR document summarizing requirements placed by Western European NPP operators on the future design of nuclear power plants. A partial goal of this discussion consists in mapping, from the PSA point of view, those selected design, operational and/or safety factors of future NPPs that may be entirely new or, at least, newly addressed. Therefore, the terms of reference for this stage were formulated as follows: Assess current level of knowledge and procedures in the analysis of factors and phenomena with a dominant influence upon operational safety of new generation reactors, especially in the following areas: (1) Phenomenology of failure types and mechanisms and reliability of conventional passive safety system components; (2) Phenomenology of failure types and mechanisms and reliability of non-conventional passive components of newly designed safety systems; (3) Phenomenology of types and mechanisms of dependent failures; (4) Human factor role in new generation reactors and its effect upon safety; (5) Fire safety and other external threats to new nuclear installations; (6) Reliability of the digital systems of the I and C system and their effect upon safety; and (7) Organizational factors in new nuclear installations. (P.A.)

JASPAR 2016: a major expansion and update of the open-access database of transcription factor binding profiles.

Science.gov (United States)

Mathelier, Anthony; Fornes, Oriol; Arenillas, David J; Chen, Chih-Yu; Denay, Grégoire; Lee, Jessica; Shi, Wenqiang; Shyr, Casper; Tan, Ge; Worsley-Hunt, Rebecca; Zhang, Allen W; Parcy, François; Lenhard, Boris; Sandelin, Albin; Wasserman, Wyeth W

2016-01-04

JASPAR (http://jaspar.genereg.net) is an open-access database storing curated, non-redundant transcription factor (TF) binding profiles representing transcription factor binding preferences as position frequency matrices for multiple species in six taxonomic groups. For this 2016 release, we expanded the JASPAR CORE collection with 494 new TF binding profiles (315 in vertebrates, 11 in nematodes, 3 in insects, 1 in fungi and 164 in plants) and updated 59 profiles (58 in vertebrates and 1 in fungi). The introduced profiles represent an 83% expansion and 10% update when compared to the previous release. We updated the structural annotation of the TF DNA binding domains (DBDs) following a published hierarchical structural classification. In addition, we introduced 130 transcription factor flexible models trained on ChIP-seq data for vertebrates, which capture dinucleotide dependencies within TF binding sites. This new JASPAR release is accompanied by a new web tool to infer JASPAR TF binding profiles recognized by a given TF protein sequence. Moreover, we provide the users with a Ruby module complementing the JASPAR API to ease programmatic access and use of the JASPAR collection of profiles. Finally, we provide the JASPAR2016 R/Bioconductor data package with the data of this release. © The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.

National plan to enhance aviation safety through human factors improvements

Science.gov (United States)

Foushee, Clay

1990-01-01

The purpose of this section of the plan is to establish a development and implementation strategy plan for improving safety and efficiency in the Air Traffic Control (ATC) system. These improvements will be achieved through the proper applications of human factors considerations to the present and future systems. The program will have four basic goals: (1) prepare for the future system through proper hiring and training; (2) develop a controller work station team concept (managing human errors); (3) understand and address the human factors implications of negative system results; and (4) define the proper division of responsibilities and interactions between the human and the machine in ATC systems. This plan addresses six program elements which together address the overall purpose. The six program elements are: (1) determine principles of human-centered automation that will enhance aviation safety and the efficiency of the air traffic controller; (2) provide new and/or enhanced methods and techniques to measure, assess, and improve human performance in the ATC environment; (3) determine system needs and methods for information transfer between and within controller teams and between controller teams and the cockpit; (4) determine how new controller work station technology can optimally be applied and integrated to enhance safety and efficiency; (5) assess training needs and develop improved techniques and strategies for selection, training, and evaluation of controllers; and (6) develop standards, methods, and procedures for the certification and validation of human engineering in the design, testing, and implementation of any hardware or software system element which affects information flow to or from the human.

Results of a phase I/II open-label, safety and efficacy trial of coagulation factor IX (recombinant), albumin fusion protein in haemophilia B patients.

Science.gov (United States)

Martinowitz, U; Lissitchkov, T; Lubetsky, A; Jotov, G; Barazani-Brutman, T; Voigt, C; Jacobs, I; Wuerfel, T; Santagostino, E

2015-11-01

rIX-FP is a coagulation factor IX (recombinant), albumin fusion protein with more than fivefold half-life prolongation over other standard factor IX (FIX) products available on the market. This prospective phase II, open-label study evaluated the safety and efficacy of rIX-FP for the prevention of bleeding episodes during weekly prophylaxis and assessed the haemostatic efficacy for on-demand treatment of bleeding episodes in previously treated patients with haemophilia B. The study consisted of a 10-14 day evaluation of rIX-FP pharmacokinetics (PK), and an 11 month safety and efficacy evaluation period with subjects receiving weekly prophylaxis treatment. Safety was evaluated by the occurrence of related adverse events, and immunogenic events, including development of inhibitors. Efficacy was evaluated by annualized spontaneous bleeding rate (AsBR), and the number of injections to achieve haemostasis. Seventeen subjects participated in the study, 13 received weekly prophylaxis and 4 received episodic treatment only. No inhibitors were detected in any subject. The mean and median AsBR were 1.25, and 1.13 respectively in the weekly prophylaxis arm. All bleeding episodes were treated with 1 or 2 injections of rIX-FP. Three prophylaxis subjects who were treated on demand prior to study entry had >85% reduction in AsBR compared to the bleeding rate prior to study entry. This study demonstrated the efficacy for weekly routine prophylaxis of rIX-FP to prevent spontaneous bleeding episodes and for the treatment of bleeding episodes. In addition no safety issues were detected during the study and an improved PK profile was demonstrated. © 2015 CSL Behring. Haemophilia published by John Wiley & Sons Ltd.

Toroidal equilibrium and radial profiles from magnetic measurements in Extrap T1

International Nuclear Information System (INIS)

Brunsell, Per; Jin Li; Tennfors, Einar

1991-01-01

The toroidal equilibrium position in the Extrap T1 toroidal Z-pinch is studied by measuring the currents induced in the external octupole field rings. Radial profiles are obtained by an internal magnetic coil array. From the magnetic field, profiles of current density, plasma pressure, safety factor, resistivity and input power density are deduced. A polynomial model is developed to simulate the measured profiles. The classical ion heat conduction losses in Extrap discharges are calculated using this model and compared to the power input. for polynomials matched to magnetic field profiles measured in present experiments, these losses are small. By varying the coefficients of the polynomials, a region is found where the power input can balance the classical heat conduction losses at higher values of Θ and β o . (Author)

Human Factors Evaluation of Man-Machine Interface for Periodic Safety Review of Yonggwang Unit no. 1, 2

International Nuclear Information System (INIS)

Lee, Yong Hee; Lee, Jung Woon; Park, Jae Chang

2006-01-01

This report describes the research results of human factors assessment on the MMI(Man Machine Interface) equipment as part of Periodic Safety Review(PSR) of Yonggwang Unit no. 1, 2. As MMI is a key factor among human factors to be reviewed in PSR, we reviewed the MMI components of nuclear power plants in aspect of human factors engineering. The availability, suitability, and effectiveness of the MMI devices were chosen to be reviewed. The MMI devices were investigated through the review of design documents related to the MMI, survey of control panels, evaluation of experts, and experimental assessment. Checklists were used to perform this assessment and record the review results. The items mentioned by the expert comments to review in detail in relation with task procedures were tested by experiments with operators' participation. For some questionable issues arisen during this MMI review, operator workload and possibility of errors in operator actions were analysed. The reviewed MMI devices contain MCR(Main Control Room), SPDS(Safety Parameter Display System), RSP(Remote Shutdown Panel), and the selected LCBs(Local Control Boards) importantly related to safety. As results of the assessments, any significant problem challenging the safety was not found on human factors in the MMI devices. However, several small items to be changed and improved in suitability of MMI devices were discovered. An action plan is recommended to accommodate the suggestions and review comments. It will enhance the plant safety on MMI area

Human Factors Evaluation of Man-Machine Interface for Periodic Safety Review of Yonggwang Unit no. 1, 2

Energy Technology Data Exchange (ETDEWEB)

Lee, Yong Hee; Lee, Jung Woon; Park, Jae Chang (and others)

2006-01-15

This report describes the research results of human factors assessment on the MMI(Man Machine Interface) equipment as part of Periodic Safety Review(PSR) of Yonggwang Unit no. 1, 2. As MMI is a key factor among human factors to be reviewed in PSR, we reviewed the MMI components of nuclear power plants in aspect of human factors engineering. The availability, suitability, and effectiveness of the MMI devices were chosen to be reviewed. The MMI devices were investigated through the review of design documents related to the MMI, survey of control panels, evaluation of experts, and experimental assessment. Checklists were used to perform this assessment and record the review results. The items mentioned by the expert comments to review in detail in relation with task procedures were tested by experiments with operators' participation. For some questionable issues arisen during this MMI review, operator workload and possibility of errors in operator actions were analysed. The reviewed MMI devices contain MCR(Main Control Room), SPDS(Safety Parameter Display System), RSP(Remote Shutdown Panel), and the selected LCBs(Local Control Boards) importantly related to safety. As results of the assessments, any significant problem challenging the safety was not found on human factors in the MMI devices. However, several small items to be changed and improved in suitability of MMI devices were discovered. An action plan is recommended to accommodate the suggestions and review comments. It will enhance the plant safety on MMI area.

Risk Factors Profile of Shoulder Dystocia in Oman: A Case Control Study

OpenAIRE

Maha M. Al-Khaduri; Rania Mohammed Abudraz; Sayed G. Rizvi; Yahya M. Al-Farsi

2014-01-01

Objective: This study aimed to assess the risk factor profile of shoulder dystocia and associated neonatal complications in Oman, a developing Arab country. Methods: A retrospective case-control study was conducted among 111 cases with dystocia and 111 controls, identified during 1994-2006 period in a tertiary care hospital in Oman. Controls were randomly selected among women who did not have dystocia, and were matched to cases on the day of delivery. Data related to potential risk factor...

Optical escape factors for Doppler profiles in spherical, cylindrical and plane parallel geometries

International Nuclear Information System (INIS)

Otsuka, Masamoto.

1977-12-01

Optical escape factors for Doppler profiles in spherical, cylindrical and plane parallel geometries are tabulated over the range of optical depths from 10 -3 to 10 5 . Relations with the known formulae are discussed also. (auth.)

Defining safety culture and the nexus between safety goals and safety culture. 3. A Methodology for Identifying Deficiencies in Safety Culture

International Nuclear Information System (INIS)

Apostolakis, George; Weil, Rick

2001-01-01

At present, the drivers of performance problems at nuclear power plants (NPPs) are organizational in nature. Organizational deficiencies and other 'latent' conditions cause human errors, resulting in incidents that impact the performance of NPPs. Therefore, the human reliability community, regulators, and others concerned with NPP safety express the view that safety culture and organizational factors play an important role in plant safety. However, we have yet to identify one complete set of organizational factors, establish links between deficient safety culture and performance, or develop adequate tools to measure safety culture. This paper will contribute to the resolution of these issues. Safety culture is not a single factor but rather is a collection of several distinct factors. This paper asserts that in order to pro-actively manage safety culture at NPPs, leading indicators and appropriate measurements must be identified and developed. Central to this effort are the identification of the distinct factors comprising safety culture and the relationships between those factors and performance. We have identified several factors important to safety culture. We have developed a methodology that is a combination of traditional root-cause analysis and theories of human error, most notably Reason's theory of accident causation. In addition to this methodology's usefulness in identifying deficiencies in safety culture, it could also be used as a starting point to identify leading indicators of deteriorating safety performance. We have identified six organizational factors as being important: communication, formalization, goal prioritization, problem identification, roles and responsibilities, and technical knowledge. In addition, we have found that certain organizational factors, although pervasive throughout the organization, have a much greater influence on the successful outcome of particular tasks of work processes, rather than being equally important to all

HPV and high-risk gene expression profiles predict response to chemoradiotherapy in head and neck cancer, independent of clinical factors

International Nuclear Information System (INIS)

Jong, Monique C. de; Pramana, Jimmy; Knegjens, Joost L.; Balm, Alfons J.M.; Brekel, Michiel W.M. van den; Hauptmann, Michael; Begg, Adrian C.; Rasch, Coen R.N.

2010-01-01

Purpose: The purpose of this study was to combine gene expression profiles and clinical factors to provide a better prediction model of local control after chemoradiotherapy for advanced head and neck cancer. Material and methods: Gene expression data were available for a series of 92 advanced stage head and neck cancer patients treated with primary chemoradiotherapy. The effect of the Chung high-risk and Slebos HPV expression profiles on local control was analyzed in a model with age at diagnosis, gender, tumor site, tumor volume, T-stage and N-stage and HPV profile status. Results: Among 75 patients included in the study, the only factors significantly predicting local control were tumor site (oral cavity vs. Pharynx, hazard ratio 4.2 [95% CI 1.4-12.5]), Chung gene expression status (high vs. Low risk profile, hazard ratio 4.4 [95% CI 1.5-13.3]) and HPV profile (negative vs. Positive profile, hazard ratio 6.2 [95% CI 1.7-22.5]). Conclusions: Chung high-risk expression profile and a negative HPV expression profile were significantly associated with increased risk of local recurrence after chemoradiotherapy in advanced pharynx and oral cavity tumors, independent of clinical factors.

The consideration of the humane factor is essential in safety systems

International Nuclear Information System (INIS)

Parisot, F.

2010-01-01

In most risk analysis we consider that the staff fit perfectly the tasks to do in terms of training and competence but in fact a lot of factors intervene like the level of stress of the operator, the time available to identify the trouble or to take a decision, the relevance of the procedures, or the level of coordination and communication between the members of the staff. Different methods exist to assess the human factor, most have been designed to be used in the nuclear sector for instance: THERP (Technique for Human Error Rate Prediction) or OATS (Operation Action Tree) or SHARP (Systematic Human Action Reliability Procedure). These methods apply as early as the design stage of the engineered safety systems. Virtual reality has entered these methods because it allows operators to learn by making errors since errors in virtual reality have no consequences. Learning by making errors is an efficient method to get the operator used to accidental situations and as a consequence to reduce his level of stress. Some methods incorporate human elements into system safety analysis through the definition of performance shaping factors that describe the behaviour of operators in terms of physical and psychological abilities. (A.C.)

Meta-analysis of pemetrexed plus carboplatin doublet safety profile in first-line non-squamous non-small cell lung cancer studies.

Science.gov (United States)

Okamoto, Isamu; Schuette, Wolfgang H W; Stinchcombe, Thomas E; Rodrigues-Pereira, José; San Antonio, Belén; Chen, Jian; Liu, Jingyi; John, William J; Zinner, Ralph G

2017-05-01

This meta-analysis compared safety profiles (selected drug-related treatment-emergent adverse events [TEAEs]) of first-line pemetrexed plus carboplatin (PCb) area under the concentration-time curve 5 mg/min•mL (PCb5) or 6 mg/min•mL (PCb6), two widely used regimens in clinical practice for advanced non-squamous non-small cell lung cancer. All patients received pemetrexed 500 mg/m 2 every 21 days with either of two carboplatin doses for up to 4-6 cycles. Safety profiles of PCb doses were compared using three statistical analysis methods: frequency table analysis (FTA), generalized linear mixed effect model (GLMM), and the propensity score method. Efficacy outcomes of PCb5 and PCb6 regimens were summarized. A total of 486 patients mainly from the US, Europe, and East Asia were included in the analysis; 22% (n = 105) received PCb5 in one trial and 78% (n = 381) received PCb6 in four trials. The FTA comparison demonstrated that PCb5 vs PCb6 was associated with a statistically significantly lower incidence of TEAEs, including all-grade thrombocytopenia, anemia, fatigue, and vomiting, and grade 3/4 thrombocytopenia. In the GLMM analysis, PCb5 patients were numerically less likely to experience all-grade and grade 3/4 neutropenia, anemia, and thrombocytopenia. The propensity score regression analysis showed PCb5 group patients were significantly less likely than PCb6 group patients to experience all-grade hematologic TEAEs and grade 3/4 thrombocytopenia and anemia. After applying propensity score 1:1 matching, FTA analysis showed that the PCb5 group had significantly less all-grade and grade 3/4 hematologic toxicities. Overall efficacy outcomes, including overall survival, progression-free survival, and response rate, were similar between the two carboplatin doses. Acknowledging the limitations of this meta-analysis of five trials, heterogeneous in patient's characteristics and trial designs, the results show that the PCb5 regimen was generally associated

Effects of a Workplace Intervention Targeting Psychosocial Risk Factors on Safety and Health Outcomes

Science.gov (United States)

Hammer, Leslie B.; Truxillo, Donald M.; Bodner, Todd; Rineer, Jennifer; Pytlovany, Amy C.; Richman, Amy

2015-01-01

The goal of this study was to test the effectiveness of a workplace intervention targeting work-life stress and safety-related psychosocial risk factors on health and safety outcomes. Data were collected over time using a randomized control trial design with 264 construction workers employed in an urban municipal department. The intervention involved family- and safety-supportive supervisor behavior training (computer-based), followed by two weeks of behavior tracking and a four-hour, facilitated team effectiveness session including supervisors and employees. A significant positive intervention effect was found for an objective measure of blood pressure at the 12-month follow-up. However, no significant intervention results were found for self-reported general health, safety participation, or safety compliance. These findings suggest that an intervention focused on supervisor support training and a team effectiveness process for planning and problem solving should be further refined and utilized in order to improve employee health with additional research on the beneficial effects on worker safety. PMID:26557703

Effects of a Workplace Intervention Targeting Psychosocial Risk Factors on Safety and Health Outcomes

Directory of Open Access Journals (Sweden)

Leslie B. Hammer

2015-01-01

Full Text Available The goal of this study was to test the effectiveness of a workplace intervention targeting work-life stress and safety-related psychosocial risk factors on health and safety outcomes. Data were collected over time using a randomized control trial design with 264 construction workers employed in an urban municipal department. The intervention involved family- and safety-supportive supervisor behavior training (computer-based, followed by two weeks of behavior tracking and a four-hour, facilitated team effectiveness session including supervisors and employees. A significant positive intervention effect was found for an objective measure of blood pressure at the 12-month follow-up. However, no significant intervention results were found for self-reported general health, safety participation, or safety compliance. These findings suggest that an intervention focused on supervisor support training and a team effectiveness process for planning and problem solving should be further refined and utilized in order to improve employee health with additional research on the beneficial effects on worker safety.

Operation, Safety and Human: Critical Factors for the Success of Railway Transportation

NARCIS (Netherlands)

Rajabali Nejad, Mohammadreza; Martinetti, Alberto; van Dongen, Leonardus Adriana Maria

2016-01-01

This paper focuses on three categories of performance indicators for railway transportation: the excellence of operation, system safety and human factors. These are among the most critical indicators for delivering high quality services. This paper discusses the main issues, challenges and future

Advances in Predictive Toxicology for Discovery Safety through High Content Screening.

Science.gov (United States)

Persson, Mikael; Hornberg, Jorrit J

2016-12-19

High content screening enables parallel acquisition of multiple molecular and cellular readouts. In particular the predictive toxicology field has progressed from the advances in high content screening, as more refined end points that report on cellular health can be studied in combination, at the single cell level, and in relatively high throughput. Here, we discuss how high content screening has become an essential tool for Discovery Safety, the discipline that integrates safety and toxicology in the drug discovery process to identify and mitigate safety concerns with the aim to design drug candidates with a superior safety profile. In addition to customized mechanistic assays to evaluate target safety, routine screening assays can be applied to identify risk factors for frequently occurring organ toxicities. We discuss the current state of high content screening assays for hepatotoxicity, cardiotoxicity, neurotoxicity, nephrotoxicity, and genotoxicity, including recent developments and current advances.

JASPAR 2010: the greatly expanded open-access database of transcription factor binding profiles

Science.gov (United States)

Portales-Casamar, Elodie; Thongjuea, Supat; Kwon, Andrew T.; Arenillas, David; Zhao, Xiaobei; Valen, Eivind; Yusuf, Dimas; Lenhard, Boris; Wasserman, Wyeth W.; Sandelin, Albin

2010-01-01

JASPAR (http://jaspar.genereg.net) is the leading open-access database of matrix profiles describing the DNA-binding patterns of transcription factors (TFs) and other proteins interacting with DNA in a sequence-specific manner. Its fourth major release is the largest expansion of the core database to date: the database now holds 457 non-redundant, curated profiles. The new entries include the first batch of profiles derived from ChIP-seq and ChIP-chip whole-genome binding experiments, and 177 yeast TF binding profiles. The introduction of a yeast division brings the convenience of JASPAR to an active research community. As binding models are refined by newer data, the JASPAR database now uses versioning of matrices: in this release, 12% of the older models were updated to improved versions. Classification of TF families has been improved by adopting a new DNA-binding domain nomenclature. A curated catalog of mammalian TFs is provided, extending the use of the JASPAR profiles to additional TFs belonging to the same structural family. The changes in the database set the system ready for more rapid acquisition of new high-throughput data sources. Additionally, three new special collections provide matrix profile data produced by recent alternative high-throughput approaches. PMID:19906716

Risk factors for fishermen’s health and safety in Greece

DEFF Research Database (Denmark)

Frantzeskou, Elpida; Kastania, Anastasia N; Riza, Elena

2013-01-01

Aim: The aim of the study is to determine the risks for health and safety in Greek fisheries workers by exploring their health status and the health risk factors present in their occupational environment, thus providing a current baseline for further research in the future and for documentation....... The health risks factors studied include excessive weight, cardiovascular incidents and dermatological, musculoskeletal, respiratory, hearing, stress, and anxiety problems. The occupational health risk factors include alcohol, fatty food consumption, smoking, and lack of physical exercise. Conclusions......: The health effects observed are causally related to diet, smoking, and exercise, which in turn relate to the specific working conditions and culture in small-scale fishing that need to be taken into consideration in prevention programmes. The results are comparable withinternational fisheries experience...

Evaluation of intestinal phosphate binding to improve the safety profile of oral sodium phosphate bowel cleansing.

Directory of Open Access Journals (Sweden)

Stef Robijn

Full Text Available Prior to colonoscopy, bowel cleansing is performed for which frequently oral sodium phosphate (OSP is used. OSP results in significant hyperphosphatemia and cases of acute kidney injury (AKI referred to as acute phosphate nephropathy (APN; characterized by nephrocalcinosis are reported after OSP use, which led to a US-FDA warning. To improve the safety profile of OSP, it was evaluated whether the side-effects of OSP could be prevented with intestinal phosphate binders. Hereto a Wistar rat model of APN was developed. OSP administration (2 times 1.2 g phosphate by gavage with a 12h time interval induced bowel cleansing (severe diarrhea and significant hyperphosphatemia (21.79 ± 5.07 mg/dl 6h after the second OSP dose versus 8.44 ± 0.97 mg/dl at baseline. Concomitantly, serum PTH levels increased fivefold and FGF-23 levels showed a threefold increase, while serum calcium levels significantly decreased from 11.29 ± 0.53 mg/dl at baseline to 8.68 ± 0.79 mg/dl after OSP. OSP administration induced weaker NaPi-2a staining along the apical proximal tubular membrane. APN was induced: serum creatinine increased (1.5 times baseline and nephrocalcinosis developed (increased renal calcium and phosphate content and calcium phosphate deposits on Von Kossa stained kidney sections. Intestinal phosphate binding (lanthanum carbonate or aluminum hydroxide was not able to attenuate the OSP induced side-effects. In conclusion, a clinically relevant rat model of APN was developed. Animals showed increased serum phosphate levels similar to those reported in humans and developed APN. No evidence was found for an improved safety profile of OSP by using intestinal phosphate binders.

A Methodology To Incorporate The Safety Culture Into Probabilistic Safety Assessments

Energy Technology Data Exchange (ETDEWEB)

Park, Sunghyun; Kim, Namyeong; Jae, Moosung [Hanyang University, Seoul (Korea, Republic of)

2015-10-15

In order to incorporate organizational factors into PSA, a methodology needs to be developed. Using the AHP to weigh organizational factors as well as the SLIM to rate those factors, a methodology is introduced in this study. The safety issues related to nuclear safety culture have occurred increasingly. The quantification tool has to be developed in order to include the organizational factor into Probabilistic Safety Assessments. In this study, the state-of-the-art for the organizational evaluation methodologies has been surveyed. This study includes the research for organizational factors, maintenance process, maintenance process analysis models, a quantitative methodology using Analytic Hierarchy Process, Success Likelihood Index Methodology. The purpose of this study is to develop a methodology to incorporate the safety culture into PSA for obtaining more objective risk than before. The organizational factor considered in nuclear safety culture might affect the potential risk of human error and hardware-failure. The safety culture impact index to monitor the plant safety culture can be assessed by applying the developed methodology into a nuclear power plant.

A Methodology To Incorporate The Safety Culture Into Probabilistic Safety Assessments

International Nuclear Information System (INIS)

Park, Sunghyun; Kim, Namyeong; Jae, Moosung

2015-01-01

In order to incorporate organizational factors into PSA, a methodology needs to be developed. Using the AHP to weigh organizational factors as well as the SLIM to rate those factors, a methodology is introduced in this study. The safety issues related to nuclear safety culture have occurred increasingly. The quantification tool has to be developed in order to include the organizational factor into Probabilistic Safety Assessments. In this study, the state-of-the-art for the organizational evaluation methodologies has been surveyed. This study includes the research for organizational factors, maintenance process, maintenance process analysis models, a quantitative methodology using Analytic Hierarchy Process, Success Likelihood Index Methodology. The purpose of this study is to develop a methodology to incorporate the safety culture into PSA for obtaining more objective risk than before. The organizational factor considered in nuclear safety culture might affect the potential risk of human error and hardware-failure. The safety culture impact index to monitor the plant safety culture can be assessed by applying the developed methodology into a nuclear power plant

Refactoring Real-Time Java Profiles

DEFF Research Database (Denmark)

Søndergaard, Hans; Thomsen, Bent; Ravn, Anders Peter

2011-01-01

Just like other software, Java profiles benefits from refactoring when they have been used and have evolved for some time. This paper presents a refactoring of the Real-Time Specification for Java (RTSJ) and the Safety Critical Java (SCJ) profile (JSR-302). It highlights core concepts and makes...

Towards an Enhancement of Organizational Information Security through Threat Factor Profiling (TFP) Model

Science.gov (United States)

Sidi, Fatimah; Daud, Maslina; Ahmad, Sabariah; Zainuddin, Naqliyah; Anneisa Abdullah, Syafiqa; Jabar, Marzanah A.; Suriani Affendey, Lilly; Ishak, Iskandar; Sharef, Nurfadhlina Mohd; Zolkepli, Maslina; Nur Majdina Nordin, Fatin; Amat Sejani, Hashimah; Ramadzan Hairani, Saiful

2017-09-01

Information security has been identified by organizations as part of internal operations that need to be well implemented and protected. This is because each day the organizations face a high probability of increase of threats to their networks and services that will lead to information security issues. Thus, effective information security management is required in order to protect their information assets. Threat profiling is a method that can be used by an organization to address the security challenges. Threat profiling allows analysts to understand and organize intelligent information related to threat groups. This paper presents a comparative analysis that was conducted to study the existing threat profiling models. It was found that existing threat models were constructed based on specific objectives, thus each model is limited to only certain components or factors such as assets, threat sources, countermeasures, threat agents, threat outcomes and threat actors. It is suggested that threat profiling can be improved by the combination of components found in each existing threat profiling model/framework. The proposed model can be used by an organization in executing a proactive approach to incident management.

Patient safety: Safety culture and patient safety ethics

DEFF Research Database (Denmark)

Madsen, Marlene Dyrløv

2006-01-01

,demonstrating significant, consistent and sometimes large differences in terms of safety culture factors across the units participating in the survey. Paper 5 is the results of a study of the relation between safety culture, occupational health andpatient safety using a safety culture questionnaire survey......Patient safety - the prevention of medical error and adverse events - and the initiative of developing safety cultures to assure patients from harm have become one of the central concerns in quality improvement in healthcare both nationally andinternationally. This subject raises numerous...... challenging issues of systemic, organisational, cultural and ethical relevance, which this dissertation seeks to address through the application of different disciplinary approaches. The main focus of researchis safety culture; through empirical and theoretical studies to comprehend the phenomenon, address...

Defining the patient safety attitudes and influencing factors of health professionals working at maternity hospitals.

Science.gov (United States)

Tunçer Ünver, Gamze; Harmanci Seren, Arzu Kader

2018-02-27

To determine patient safety attitudes of midwives, nurses and physicians and to examine the difference or correlation in patient safety attitudes of midwives, nurses and physicians working in maternity hospitals. It has been suggested that it is necessary to define the factors affecting patient safety attitudes of health professionals working in maternity hospitals. A descriptive and correlational design was employed.The sample comprised 58 midwives, 134 nurses and 63 physicians (255) in two maternity hospitals in Istanbul, Turkey. The data were collected using an 'information form' and a 'Patient Safety Attitude Questionnaire'. The safety attitudes of participants were generally found to be negative. However, midwives had more positive patient safety attitudes and the age, unit, adequacy of patient safety training and the importance of patient safety were the most effective variables. As health professionals working in maternity hospitals generally have negative patient safety attitudes and because patient safety training provided better attitudes among the participants, these training programmes should be developed and implemented considering the differences among age groups and units. Health professionals have different views on the patient safety culture; therefore, training needs to involve everyone to create a shared vision for patient safety. © 2018 John Wiley & Sons Ltd.

Application of classification algorithms for analysis of road safety risk factor dependencies.

Science.gov (United States)

Kwon, Oh Hoon; Rhee, Wonjong; Yoon, Yoonjin

2015-02-01

Transportation continues to be an integral part of modern life, and the importance of road traffic safety cannot be overstated. Consequently, recent road traffic safety studies have focused on analysis of risk factors that impact fatality and injury level (severity) of traffic accidents. While some of the risk factors, such as drug use and drinking, are widely known to affect severity, an accurate modeling of their influences is still an open research topic. Furthermore, there are innumerable risk factors that are waiting to be discovered or analyzed. A promising approach is to investigate historical traffic accident data that have been collected in the past decades. This study inspects traffic accident reports that have been accumulated by the California Highway Patrol (CHP) since 1973 for which each accident report contains around 100 data fields. Among them, we investigate 25 fields between 2004 and 2010 that are most relevant to car accidents. Using two classification methods, the Naive Bayes classifier and the decision tree classifier, the relative importance of the data fields, i.e., risk factors, is revealed with respect to the resulting severity level. Performances of the classifiers are compared to each other and a binary logistic regression model is used as the basis for the comparisons. Some of the high-ranking risk factors are found to be strongly dependent on each other, and their incremental gains on estimating or modeling severity level are evaluated quantitatively. The analysis shows that only a handful of the risk factors in the data dominate the severity level and that dependency among the top risk factors is an imperative trait to consider for an accurate analysis. Copyright © 2014 Elsevier Ltd. All rights reserved.

Investigation of chronic efficacy and safety profile of two potential anti-inflammatory bipyrazole-based compounds in experimental animals

Directory of Open Access Journals (Sweden)

Domiati S

2018-04-01

Full Text Available Souraya Domiati,1 Mohammed Mehanna,2,3 Hanan Ragab,4 Hania Nakkash Chmaisse,1 Ahmed El Mallah5 1Department of Pharmacology and Therapeutics, Faculty of Pharmacy, Beirut Arab University, Beirut, Lebanon; 2Department of Pharmaceutical Technology, Faculty of Pharmacy, Beirut Arab University, Beirut, Lebanon; 3Department of Industrial Pharmacy, Faculty of Pharmacy, Alexandria University, Alexandria, Egypt; 4Department of Pharmaceutical Chemistry, Faculty of Pharmacy, Alexandria University, Alexandria, Egypt; 5Department of Pharmacology, Faculty of Pharmacy, Alexandria University, Alexandria, Egypt Purpose: Although nonsteroidal anti-inflammatory drugs are widely used to treat a variety of disorders, their administration is associated with gastrointestinal side effects, acute kidney injury and liver enzymes’ elevation. Accordingly, researchers are encouraged to create novel agents with better safety profile. The aim of the current study was to evaluate the chronic efficacy and safety profile of two compounds previously proven to have acceptable acute anti-inflammatory and analgesic activities.Materials and methods: Doses were determined through formalin-induced mice paw edema-based dose–response curves. Granuloma weight was used to assess the chronic effect of the investigated compounds as compared to the vehicle and diclofenac representing the positive and the negative controls, respectively. Mice kidneys, livers and stomachs were histologically examined. Moreover, troponin I, alanine aminotransferase, aspartate aminotransferase, serum creatinine and blood urea nitrogen levels were measured. Results: The results highlight that the granulomas and exudates developed in mice after 7 days of treatment, with compound I and compound II were significantly lower than that of the negative control group. Moreover, compound I showed significantly better anti-inflammatory effect than diclofenac. Troponin level was undetected in all groups. Histopathological

Nonclinical safety strategies for stem cell therapies

Energy Technology Data Exchange (ETDEWEB)

Sharpe, Michaela E., E-mail: michaela_sharpe@yahoo.com [Investigative Toxicology, Drug Safety Research and Development, Pfizer Ltd, Ramsgate Road, Sandwich, CT13 9NJ (United Kingdom); Morton, Daniel [Exploratory Drug Safety, Drug Safety Research and Development, Pfizer Inc, Cambridge, 02140 (United States); Rossi, Annamaria [Investigative Toxicology, Drug Safety Research and Development, Pfizer Ltd, Ramsgate Road, Sandwich, CT13 9NJ (United Kingdom)

2012-08-01

Recent breakthroughs in stem cell biology, especially the development of the induced pluripotent stem cell techniques, have generated tremendous enthusiasm and efforts to explore the therapeutic potential of stem cells in regenerative medicine. Stem cell therapies are being considered for the treatment of degenerative diseases, inflammatory conditions, cancer and repair of damaged tissue. The safety of a stem cell therapy depends on many factors including the type of cell therapy, the differentiation status and proliferation capacity of the cells, the route of administration, the intended clinical location, long term survival of the product and/or engraftment, the need for repeated administration, the disease to be treated and the age of the population. Understanding the product profile of the intended therapy is crucial to the development of the nonclinical safety study design.

Nonclinical safety strategies for stem cell therapies

International Nuclear Information System (INIS)

Sharpe, Michaela E.; Morton, Daniel; Rossi, Annamaria

2012-01-01

Recent breakthroughs in stem cell biology, especially the development of the induced pluripotent stem cell techniques, have generated tremendous enthusiasm and efforts to explore the therapeutic potential of stem cells in regenerative medicine. Stem cell therapies are being considered for the treatment of degenerative diseases, inflammatory conditions, cancer and repair of damaged tissue. The safety of a stem cell therapy depends on many factors including the type of cell therapy, the differentiation status and proliferation capacity of the cells, the route of administration, the intended clinical location, long term survival of the product and/or engraftment, the need for repeated administration, the disease to be treated and the age of the population. Understanding the product profile of the intended therapy is crucial to the development of the nonclinical safety study design.

Brief Talk about Lithium-ion Batteries’ Safety and Influencing Factors

Science.gov (United States)

Jin, Cheng

2017-12-01

A brief introduction of the development background, the concept, characteristic and advantages of lithium-ion battery was given. The typical fire accidents about lithium-ion battery in production process, the vehicle with new energy, portable electronic products were summarized. Some important factors for lithium-ion batteries’ safety were emphatically analyzed. Several constructive suggestions on improvement direction were given, meanwhile, we have a nice exception on the future of lithium-ion battery industry.

Emissions from laboratory combustion of wildland fuels: Emission factors and source profiles

Science.gov (United States)

L.-W. Anthony Chen; Hans Moosmuller; W. Patrick Arnott; Judith C. Chow; John G. Watson; Ronald A. Susott; Ronald E. Babbitt; Cyle E. Wold; Emily N. Lincoln; Wei Min Hao

2007-01-01

Combustion of wildland fuels represents a major source of particulate matter (PM) and light-absorbing elemental carbon (EC) on a national and global scale, but the emission factors and source profiles have not been well characterized with respect to different fuels and combustion phases. These uncertainties limit the accuracy of current emission inventories, smoke...

Raising the profile of worker safety: highlights of the 2013 North American Agricultural Safety Summit.

Science.gov (United States)

Nelson, William J; Heiberger, Scott; Lee, Barbara C

2014-01-01

The 2013 North American Agricultural Safety Summit, an unprecedented gathering of industry leaders and safety experts, was held September 25-27 in Minneapolis, MN. Hosted by the industry-led Agricultural Safety and Health Council of America (ASHCA), there were 250 attendees, 82 speakers, 76 abstracts with poster presentations, along with "best practices" videos, genius bars sessions, learning stations, exhibits, breakfast roundtable topics, and receptions. The event was a mix of knowledge, inspiration and networking to enable participants to influence the adoption of safety practices in their home/work settings. Given the agriculture industry's commitment to feed nine billion people, the projected world population by 2050, it is imperative that producers and agribusiness strive to do it safely, humanely and sustainably. Evaluation feedback was very positive, indicating ASHCA's original objectives for the Summit were achieved.

Partial safety factor calibration from stochastic finite element computation of welded joint with random geometries

International Nuclear Information System (INIS)

Schoefs, Franck; Chevreuil, Mathilde; Pasqualini, Olivier; Cazuguel, Mikaël

2016-01-01

Welded joints are used in various structures and infrastructures like bridges, ships and offshore structures, and are submitted to cyclic stresses. Their fatigue behaviour is an industrial key issue to deal with and still offers original research subjects. One of the available methods relies on the computing of the stress concentration factor. Even if some studies were previously driven to evaluate this factor onto some cases of welded structures, the shape of the weld joint is generally idealized through a deterministic parametric geometry. Previous experimental works however have shown that this shape plays a key role in the lifetime assessment. We propose in this paper a methodology for computing the stress concentration factor in presence of random geometries of welded joints. In view to make the results available by engineers, this method merges stochastic computation and semi-probabilistic analysis by computing partial safety factors with a dedicated method. - Highlights: • Numerical computation of stress concentration factor with random geometry of weld. • Real data are used for probabilistic modelling. • Identification of partial safety factor from SFEM computation in case of random geometries.

FATIGUE AS A HAZARDOUS FACTOR FOR FLIGHT SAFETY

Directory of Open Access Journals (Sweden)

M. Lushkin Alexander

2017-01-01

Full Text Available The main priority of any air company activity and the main condition for its development is the achievement of the highest flight safety level. Significant positive results in this area have been recently achieved, hence, the relative stagna- tion of indexes, reflecting the flight safety as a condition of air transport system, has been revealed. It has become evident that the present accident prevention philosophy seems to be exhausted, and at the current stage of development it doesn’t allow to make a breakthrough in the solution of all the problems, which air companies face in this respect. In the perspec- tive to find new ways to solve the existing tasks, in 2011, International Civil Aviation Organization Council adopted fatigue risk management international standards as an alternative for the traditional approach to managing crewmember fatigue by prescribing limits on maximum daily, monthly and yearly flight and duty hours. It’s a well-known fact that state of fatigue has a special place among the functional states, which are professionally significant for airmen work and which are the key link in “man-aircraft-environment” system.In this article, fatigue is considered to be a risk factor that contributes to the formation and development of crew violations and errors in the process of piloting the aircraft. We have analyzed the characteristics and reasons leading to in- flight fatigue and estimated its influence on crew performance, considering the interrelation between them. The article specifies the methods and techniques to measure pilots fatigue; besides it has been substantiated the necessity of fatigue risk management system development in airlines to effectively ensure the flight safety.

Efficacy and Safety Profile of Diclofenac/Cyclodextrin and Progesterone/Cyclodextrin Formulations: A Review of the Literature Data.

Science.gov (United States)

Scavone, Cristina; Bonagura, Angela Colomba; Fiorentino, Sonia; Cimmaruta, Daniela; Cenami, Rosina; Torella, Marco; Fossati, Tiziano; Rossi, Francesco

2016-06-01

According to health technology assessment, patients deserve the best medicine. The development of drugs associated with solubility enhancers, such as cyclodextrins, represents a measure taken in order to improve the management of patients. Different drugs, such as estradiol, testosterone, dexamethasone, opioids, non-steroidal anti-inflammatories (NSAIDs; i.e. diclofenac), and progesterone are associated with cyclodextrins. Products containing the association of diclofenac/cyclodextrins are available for subcutaneous, intramuscular, and intravenous administration in doses that range from 25 to 75 mg. Medicinal products containing the association of progesterone/cyclodextrins are indicated for intramuscular and subcutaneous injection at a dose equal to 25 mg. The effects of cyclodextrins have been discussed in the solubility profile and permeability through biological membranes of drug molecules. A literature search was performed in order to give an overview of the pharmacokinetic characteristics, and efficacy and safety profiles of diclofenac/hydroxypropyl-β-cyclodextrin (HPβCD) and progesterone/HPβCD associations. The results of more than 20 clinical studies were reviewed. It was suggested that the new diclofenac/HPβCD formulation gives a rapid and effective response to acute pain and, furthermore, has pharmacokinetic and efficacy/safety profiles comparable to other medicinal products not containing cyclodextrins. One of the principal aspects of these new diclofenac formulations is that in lowering the dose (lower than 50 mg) the drugs could be more tolerable, especially in patients with comorbid conditions. Moreover, results of studies investigating the characteristics of progesterone and cyclodextrins showed that the new formulation (progesterone/HPβCD 25 mg solution) has the same bioavailability as other products containing progesterone. It is more rapidly absorbed and allows the achievement of peak plasma concentrations in a shorter time. Finally, the

Safety climate and attitude as evaluation measures of organizational safety.

Science.gov (United States)

Isla Díaz, R; Díaz Cabrera, D

1997-09-01

The main aim of this research is to develop a set of evaluation measures for safety attitudes and safety climate. Specifically it is intended: (a) to test the instruments; (b) to identify the essential dimensions of the safety climate in the airport ground handling companies; (c) to assess the quality of the differences in the safety climate for each company and its relation to the accident rate; (d) to analyse the relationship between attitudes and safety climate; and (e) to evaluate the influences of situational and personal factors on both safety climate and attitude. The study sample consisted of 166 subjects from three airport companies. Specifically, this research was centered on ground handling departments. The factor analysis of the safety climate instrument resulted in six factors which explained 69.8% of the total variance. We found significant differences in safety attitudes and climate in relation to type of enterprise.

Predicting safety culture: the roles of employer, operations manager and safety professional.

Science.gov (United States)

Wu, Tsung-Chih; Lin, Chia-Hung; Shiau, Sen-Yu

2010-10-01

This study explores predictive factors in safety culture. In 2008, a sample 939 employees was drawn from 22 departments of a telecoms firm in five regions in central Taiwan. The sample completed a questionnaire containing four scales: the employer safety leadership scale, the operations manager safety leadership scale, the safety professional safety leadership scale, and the safety culture scale. The sample was then randomly split into two subsamples. One subsample was used for measures development, one for the empirical study. A stepwise regression analysis found four factors with a significant impact on safety culture (R²=0.337): safety informing by operations managers; safety caring by employers; and safety coordination and safety regulation by safety professionals. Safety informing by operations managers (ß=0.213) was by far the most significant predictive factor. The findings of this study provide a framework for promoting a positive safety culture at the group level. Crown Copyright © 2010. Published by Elsevier Ltd. All rights reserved.

Analysis of contributing factors associated to related patients safety incidents in Intensive Care Medicine.

Science.gov (United States)

Martín Delgado, M C; Merino de Cos, P; Sirgo Rodríguez, G; Álvarez Rodríguez, J; Gutiérrez Cía, I; Obón Azuara, B; Alonso Ovies, Á

2015-01-01

To explore contributing factors (CF) associated to related critical patients safety incidents. SYREC study pos hoc analysis. A total of 79 Intensive Care Departments were involved. The study sample consisted of 1.017 patients; 591 were affected by one or more incidents. The CF were categorized according to a proposed model by the National Patient Safety Agency from United Kingdom that was modified. Type, class and severity of the incidents was analyzed. A total 2,965 CF were reported (1,729 were associated to near miss and 1,236 to adverse events). The CF group more frequently reported were related patients factors. Individual factors were reported more frequently in near miss and task related CF in adverse events. CF were reported in all classes of incidents. The majority of CF were reported in the incidents classified such as less serious, even thought CF patients factors were associated to serious incidents. Individual factors were considered like avoidable and patients factors as unavoidable. The CF group more frequently reported were patient factors and was associated to more severe and unavoidable incidents. By contrast, individual factors were associated to less severe and avoidable incidents. In general, CF most frequently reported were associated to near miss. Copyright © 2014 Elsevier España, S.L.U. and SEMICYUC. All rights reserved.

Construction Safety And Health Factors At The Industry Level: The Case Of Singapore

Directory of Open Access Journals (Sweden)

Charles Y.J. Cheah

2007-12-01

Full Text Available The construction industry is one of the most hazardous industries due to the unique nature of its products and the processes involved. Recent occurrences of highly publicized construction site accidents in Singapore have highlighted the immediate needs for the local industry to address safety and attention at the industry level. The objective of this paper is to examine issues and critical factors affecting S&H standards in Singapore. Clearly, collective efforts should be pursued at the industry level as the country moves towards the ultimate safety management strategy of self-regulation. The findings also indicate that the challenge of making worksites safe should not be placed solely on the contractors but should be shared by all parties affecting the value chain of construction, including the developers, the consultants and the government. The factors identified through factor analysis may inform legislators and industry practitioners in terms of the sources of problems and help develop effective strategies for improvement. Some of the experiences mentioned in the paper could also be relevant to other countries facing similar circumstances.

GOLIMUMAB — A NEW TNF α-BLOCKER. THE REVIEW OF THE EFFICACY AND SAFETY EVALUATION RESULTS

Directory of Open Access Journals (Sweden)

R. V. Denisova

2012-01-01

Full Text Available The article represents the results of efficacy and safety evaluation of the human monoclonal antibodies — golimumab, according to the data of international multicenter randomized double-blind placebo-controlled trials, including patients with active stage of rheumatoid arthritis. It was shown, that golimumab was reliably more effective than placebo both when administered hypodermic and intravenous. The safety profile of golimumab is comparable to that of the other tumor necrosis factor alpha blockers. The review also contains information on the 3d phase of golimumab efficacy and safety research in patients with juvenile idiopathic arthritis.

Safety profile of the intravenous administration of brain-targeted stable nucleic acid lipid particles

Directory of Open Access Journals (Sweden)

Mariana Conceição

2016-03-01

Full Text Available In a clinical setting, where multiple administrations of the therapeutic agent are usually required to improve the therapeutic outcome, it is crucial to assess the immunogenicity of the administered nanoparticles. In this data work, we investigated the safety profile of the repeated intravenous administration of brain-targeted stable nucleic acid lipid particles (RVG-9r-targeted SNALPs. To evaluate local activation of the immune system, we performed analysis of mouse tissue homogenates and sections from cerebellum. To investigate peripheral activation of the immune system, we used serum of mice that were intravenously injected with RVG-9r-targeted SNALPs. These data are related and were discussed in the accompanying research article entitled “Intravenous administration of brain-targeted stable nucleic acid lipid particles alleviates Machado–Joseph disease neurological phenotype” (Conceição et al., in press [1].

Insight and Lessons Learned on Organizational Factors and Safety Culture from the Review of Human Error-related Events of NPPs in Korea

International Nuclear Information System (INIS)

Kim, Ji Tae; Lee, Dhong Hoon; Choi, Young Sung

2014-01-01

Event investigation is one of the key means of enhancing nuclear safety deriving effective measures and preventing recurrences. However, it is difficult to analyze organizational factors and safety culture. This paper tries to review human error-related events from perspectives of organizational factors and safety culture, and to derive insights and lessons learned in developing the regulatory infrastructure of plant oversight on safety culture

Insight and Lessons Learned on Organizational Factors and Safety Culture from the Review of Human Error-related Events of NPPs in Korea

Energy Technology Data Exchange (ETDEWEB)

Kim, Ji Tae; Lee, Dhong Hoon; Choi, Young Sung [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2014-08-15

Event investigation is one of the key means of enhancing nuclear safety deriving effective measures and preventing recurrences. However, it is difficult to analyze organizational factors and safety culture. This paper tries to review human error-related events from perspectives of organizational factors and safety culture, and to derive insights and lessons learned in developing the regulatory infrastructure of plant oversight on safety culture.

Studying wedge factors and beam profiles for physical and enhanced dynamic wedges

Directory of Open Access Journals (Sweden)

Ahmad Misbah

2010-01-01

Full Text Available This study was designed to investigate variation in Varian′s Physical and Enhanced Dynamic Wedge Factors (WF as a function of depth and field size. The profiles for physical wedges (PWs and enhanced dynamic wedges (EDWs were also measured using LDA-99 array and compared for confirmation of EDW angles at different depths and field sizes. WF measurements were performed in water phantom using cylindrical 0.66 cc ionization chamber. WF was measured by taking the ratio of wedge and open field ionization data. A normalized wedge factor (NWF was introduced to circumvent large differences between wedge factors for different wedge angles. A strong linear dependence of PW Factor (PWF with depth was observed. Maximum variation of 8.9% and 4.1% was observed for 60° PW with depth at 6 and 15 MV beams respectively. The variation in EDW Factor (EDWF with depth was almost negligible and less than two per cent. The highest variation in PWF as a function of field size was 4.1% and 3.4% for thicker wedge (60° at 6 and 15 MV beams respectively and decreases with decreasing wedge angle. EDWF shows strong field size dependence and significant variation was observed for all wedges at both photon energies. Differences in profiles between PW and EDW were observed on toe and heel sides. These differences were dominant for larger fields, shallow depths, thicker wedges and low energy beam. The study indicated that ignoring depth and field size dependence of WF may result in under/over dose to the patient especially doing manual point dose calculation.

Leadership and Management for Safety. General Safety Requirements

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factor, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations (registrants and licensees) and other organizations concerned with facilities and activities that give rise to radiation risks

[Role of some psycho-physiological factors on driving safety].

Science.gov (United States)

Bergomi, M; Vivoli, G; Rovesti, S; Bussetti, P; Ferrari, A; Vivoli, R

2010-01-01

Within a research project on the role played by human factors on road accidents, the aim of the present study is to evaluate, in young adults, the relationships between driver behaviour and personality factors as well as to assess the neuroendocrine correlates of psychological and behavioural factors investigated. Another aim is to estimate in what measure the performance levels are affected by demographic, psychological and chronobiological variables. It has been found a positive relation between highway code violations, extroversion trait of personality and Sensation Seeking scores, so confirming that this component of personality can affect risky behaviour. Furthermore the subjects more oriented to morningness chronotype were found to be prone to adopt safe driving behaviour. Regarding the relations of the neuroendocrine parameters and driving behaviour a positive correlation was observed between dopamine levels and frequency of driving violations while a negative relationship was found between adrenaline levels and frequency of driving errors. In conclusion the identification of psycho-physiological variables related to driving risky behaviour might be a useful instrument to design traffic safety programs tailored to high risk subjects.

Analysis on Pollution Factors in Asparagus Production and Research on Safety Production Technology

OpenAIRE

Ma, Liping; Hao, Bianqing; Qiao, Xiongwu

2013-01-01

Based on the analysis on the infection degree, infection law and influencing factors of the main diseases on asparagus and the analysis on the pollution factors in asparagus production such as blind pesticide use, atmospheric pollution and acid rain, the pollution of soil and fertilizer, this article proposes asparagus safety production technologies which include the selection of disease-resistant variety and suitable planting field, scientific and reasonable disease control, balanced fertili...

Modeling pedestrian crossing speed profiles considering speed change behavior for the safety assessment of signalized intersections.

Science.gov (United States)

Iryo-Asano, Miho; Alhajyaseen, Wael K M

2017-11-01

Pedestrian safety is one of the most challenging issues in road networks. Understanding how pedestrians maneuver across an intersection is the key to applying countermeasures against traffic crashes. It is known that the behaviors of pedestrians at signalized crosswalks are significantly different from those in ordinary walking spaces, and they are highly influenced by signal indication, potential conflicts with vehicles, and intersection geometries. One of the most important characteristics of pedestrian behavior at crosswalks is the possible sudden speed change while crossing. Such sudden behavioral change may not be expected by conflicting vehicles, which may lead to hazardous situations. This study aims to quantitatively model the sudden speed changes of pedestrians as they cross signalized crosswalks under uncongested conditions. Pedestrian speed profiles are collected from empirical data and speed change events are extracted assuming that the speed profiles are stepwise functions. The occurrence of speed change events is described by a discrete choice model as a function of the necessary walking speed to complete crossing before the red interval ends, current speed, and the presence of turning vehicles in the conflict area. The amount of speed change before and after the event is modeled using regression analysis. A Monte Carlo simulation is applied for the entire speed profile of the pedestrians. The results show that the model can represent the pedestrian travel time distribution more accurately than the constant speed model. Copyright © 2017 Elsevier Ltd. All rights reserved.

Human Factors engineering criteria and design for the Hanford Waste Vitrification Plant preliminary safety analysis report

International Nuclear Information System (INIS)

Wise, J.A.; Schur, A.; Stitzel, J.C.L.

1993-09-01

This report provides a rationale and systematic methodology for bringing Human Factors into the safety design and operations of the Hanford Waste Vitrification Plant (HWVP). Human Factors focuses on how people perform work with tools and machine systems in designed settings. When the design of machine systems and settings take into account the capabilities and limitations of the individuals who use them, human performance can be enhanced while protecting against susceptibility to human error. The inclusion of Human Factors in the safety design of the HWVP is an essential ingredient to safe operation of the facility. The HWVP is a new construction, nonreactor nuclear facility designed to process radioactive wastes held in underground storage tanks into glass logs for permanent disposal. Its design and mission offer new opposites for implementing Human Factors while requiring some means for ensuring that the Human Factors assessments are sound, comprehensive, and appropriately directed

Studies of safety and critical work situations in nuclear power plants: A human factors perspective

International Nuclear Information System (INIS)

Jacobsson Kecklund, L.

1998-05-01

The purpose of this thesis was to develop and apply different approaches for analyzing safety in critical work situations in real work settings in nuclear power plants, and also to identify safety enhancing measures by using the framework of interaction between human, organizational and technical subsystems. A Cognitive Psychology as well as a Stress Psychology framework was used. All studies were related to the annual outage operational state where the need for coping with many infrequent tasks, often carried out under high time pressure, puts great strain on the staff and organisation of the plant. In three studies the natural variations in the plant state, normal operation and annual outage operation, were used to explore human performance, work-related factors as well as coping and the operators' own resources and the relationship between them. In the annual outage condition high work demands, decreased sleepiness at night shift, more errors and less satisfaction with work performance quality was reported by maintenance as well as by control room operators. A relationship between high work demands and more organizational problems and reports of more frequent human errors and lower satisfactions with work performance quality was also identified in the annual outage condition. Moreover, a relationship between increased sleepiness during night shift, more frequent use of coping strategies and a higher frequency of human errors was reported. In two studies the Event and Barrier Function Model was applied to analyze the safety of barrier function systems inserted into work process sequences to protect the systems from the negative consequences of failures and errors. The model was also used to assess safety in relation to a technical and organizational change. The last study addressed changes in work performance and work-related factors in relation to a technical and organizational change of a safety significant work process involving increased automation and new

Lower hybrid wave accessibility as a means for current profile control

International Nuclear Information System (INIS)

Briffod, G.; Gormezano, C.; Parlange, F.; Van Houtte, D.

1986-01-01

Powerful ICRH experiments on JET and Neutral Beam Injection of various species on TFTR have recently confirmed the insensitivity of the temperature and safety factor profile shapes to the heating profile and the important role played by the sawtooth activity on the overall performances. In order to overcome these limitations, we propose in this paper, in a Tokamak operating at constant plasma current: to control the resistive part of the current by driving an H.F. current by Lower Hybrid Wave. To act on the current profile, with the constraint that q(o) > 1 by controlling the wave penetration. Constant plasma current Tokamak discharges in which a part of the current is driven by L.H.W. have been extensively studied on PETULA and this mode of operation has proven to be very efficient in stabilizing the sawtooth and M.H.D. activity

JASPAR 2014: an extensively expanded and updated open-access database of transcription factor binding profiles.

Science.gov (United States)

Mathelier, Anthony; Zhao, Xiaobei; Zhang, Allen W; Parcy, François; Worsley-Hunt, Rebecca; Arenillas, David J; Buchman, Sorana; Chen, Chih-yu; Chou, Alice; Ienasescu, Hans; Lim, Jonathan; Shyr, Casper; Tan, Ge; Zhou, Michelle; Lenhard, Boris; Sandelin, Albin; Wasserman, Wyeth W

2014-01-01

JASPAR (http://jaspar.genereg.net) is the largest open-access database of matrix-based nucleotide profiles describing the binding preference of transcription factors from multiple species. The fifth major release greatly expands the heart of JASPAR-the JASPAR CORE subcollection, which contains curated, non-redundant profiles-with 135 new curated profiles (74 in vertebrates, 8 in Drosophila melanogaster, 10 in Caenorhabditis elegans and 43 in Arabidopsis thaliana; a 30% increase in total) and 43 older updated profiles (36 in vertebrates, 3 in D. melanogaster and 4 in A. thaliana; a 9% update in total). The new and updated profiles are mainly derived from published chromatin immunoprecipitation-seq experimental datasets. In addition, the web interface has been enhanced with advanced capabilities in browsing, searching and subsetting. Finally, the new JASPAR release is accompanied by a new BioPython package, a new R tool package and a new R/Bioconductor data package to facilitate access for both manual and automated methods.

Human Factors Evaluation of Procedures for Periodic Safety Review of Yonggwang Unit no. 1, 2

Energy Technology Data Exchange (ETDEWEB)

Lee, Yong Hee; Lee, Jung Woon; Park, Jae Chang (and others)

2006-01-15

This report describes the results of human factors assessment on the plant operating procedures as part of Periodic Safety Review(PSR) of Yonggwang Nuclear Power Plant Unit no. 1, 2. The suitability of item and appropriateness of format and structure in the key operating procedures of nuclear power plants were investigated by the review of plant operating experiences and procedure documents, field survey, and experimental assessment on some part of procedures. A checklist was used to perform this assessment and record the review results. The reviewed procedures include EOP(Emergency Operating Procedures), GOP(General Operating Procedures), AOP(Abnormal Operating Procedures), and management procedures of some technical departments. As results of the assessments, any significant problem challenging the safety was not found on the human factors in the operating procedures. However, several small items to be changed and improved were discovered. An action plan is recommended to accommodate the suggestions and review comments. It will enhance the plant safety on the operating procedure.

Migration Factors in West African Immigrant Parents' Perceptions of Their Children's Neighborhood Safety.

Science.gov (United States)

Rasmussen, Andrew; Cissé, Aïcha; Han, Ying; Roubeni, Sonia

2018-02-12

Immigrants make up large proportions of many low-income neighborhoods, but have been largely ignored in the neighborhood safety literature. We examined perceived safety's association with migration using a six-item, child-specific measure of parents' perceptions of school-aged (5-12 years of age) children's safety in a sample of 93 West African immigrant parents in New York City. Aims of the study were (a) to identify pre-migration correlates (e.g., trauma in home countries), (b) to identify migration-related correlates (e.g., immigration status, time spent separated from children during migration), and (c) to identify pre-migration and migration correlates that accounted for variance after controlling for non-migration-related correlates (e.g., neighborhood crime, parents' psychological distress). In a linear regression model, children's safety was associated with borough of residence, greater English ability, less emotional distress, less parenting difficulty, and a history of child separation. Parents' and children's gender, parents' immigration status, and the number of contacts in the U.S. pre-migration and pre-migration trauma were not associated with children's safety. That child separation was positively associated with safety perceptions suggests that the processes that facilitate parent-child separation might be reconceptualized as strengths for transnational families. Integrating migration-related factors into the discussion of neighborhood safety for immigrant populations allows for more nuanced views of immigrant families' well-being in host countries. © Society for Community Research and Action 2018.

Factors influencing safety in a sample of marked pedestrian crossings selected for safety inspections in the city of Oslo.

Science.gov (United States)

Elvik, Rune; Sørensen, Michael W J; Nævestad, Tor-Olav

2013-10-01

This paper reports an analysis of factors influencing safety in a sample of marked pedestrian crossings in the city of Oslo, Norway. The sample consists of 159 marked pedestrian crossings where a total of 316 accidents were recorded during a period of five years. The crossings were selected for inspection because of they were, for various reasons, regarded as sub-standard. The sample of crossings is therefore not representative of all pedestrian crossings in Oslo. Factors influencing the number of accidents were studied by means of negative binomial regression. Factors that were studied included the volume of pedestrians and vehicles, the number of traffic lanes at the crossing, the location of the crossing (midblock or junction), the type of traffic control, the share of pedestrians using the crossing and the speed of approaching vehicles. The analysis confirmed the presence of a "safety-in-numbers" effect, meaning that an increase in the number of pedestrians is associated with a lower risk of accident for each pedestrian. Crossings located in four-leg junctions or roundabouts had more accidents than crossings located in three-leg junctions or on sections between junctions. A high share of pedestrians crossing the road outside the marked crossing was associated with a high number of accidents. Increased speed was associated with an increased number of accidents. Copyright © 2013 Elsevier Ltd. All rights reserved.

Off-axis current drive and real-time control of current profile in JT-60U

International Nuclear Information System (INIS)

Suzuki, T.; Ide, S.; Oikawa, T.; Fujita, T.; Ishikawa, M.; Seki, M.; Matsunaga, G.; Hatae, T.; Naito, O.; Hamamatsu, K.; Sueoka, M.; Hosoyama, H.; Nakazato, M.

2008-01-01

Aiming at optimization of current profile in high-β plasmas for higher confinement and stability, a real-time control system of the minimum of the safety factor (q min ) using the off-axis current drive has been developed. The off-axis current drive can raise the safety factor in the centre and help to avoid instability that limits the performance of the plasma. The system controls the injection power of lower-hybrid waves, and hence its off-axis driven current in order to control q min . The real-time control of q min is demonstrated in a high-β plasma, where q min follows the temporally changing reference q min,ref from 1.3 to 1.7. Applying the control to another high-β discharge (β N = 1.7, β p = 1.5) with m/n = 2/1 neo-classical tearing mode (NTM), q min was raised above 2 and the NTM was suppressed. The stored energy increased by 16% with the NTM suppressed, since the resonant rational surface was eliminated. For the future use for current profile control, current density profile for off-axis neutral beam current drive (NBCD) is for the first time measured, using the motional Stark effect diagnostic. Spatially localized NBCD profile was clearly observed at the normalized minor radius ρ of about 0.6-0.8. The location was also confirmed by multi-chordal neutron emission profile measurement. The total amount of the measured beam driven current was consistent with the theoretical calculation using the ACCOME code. The CD location in the calculation was inward shifted than the measurement

Safety climate and self-reported injury: assessing the mediating role of employee safety control.

Science.gov (United States)

Huang, Yueng-Hsiang; Ho, Michael; Smith, Gordon S; Chen, Peter Y

2006-05-01

To further reduce injuries in the workplace, companies have begun focusing on organizational factors which may contribute to workplace safety. Safety climate is an organizational factor commonly cited as a predictor of injury occurrence. Characterized by the shared perceptions of employees, safety climate can be viewed as a snapshot of the prevailing state of safety in the organization at a discrete point in time. However, few studies have elaborated plausible mechanisms through which safety climate likely influences injury occurrence. A mediating model is proposed to link safety climate (i.e., management commitment to safety, return-to-work policies, post-injury administration, and safety training) with self-reported injury through employees' perceived control on safety. Factorial evidence substantiated that management commitment to safety, return-to-work policies, post-injury administration, and safety training are important dimensions of safety climate. In addition, the data support that safety climate is a critical factor predicting the history of a self-reported occupational injury, and that employee safety control mediates the relationship between safety climate and occupational injury. These findings highlight the importance of incorporating organizational factors and workers' characteristics in efforts to improve organizational safety performance.

Establishment and prioritization of relevant factors to the safety of fuel cycle facilities non reactor through dynamics archetypes evaluation

International Nuclear Information System (INIS)

Sousa, Anna Leticia Barbosa de

2012-01-01

The present work aims to establish and prioritize factors that are important to the safety of nuclear fuel cycle facilities in order to model, analyze and design safety as a physical system, employing systemic models in an innovative way. This work takes into consideration the fact that models that use adaptations of methodologies for nuclear reactors will not properly work due to the specificities of fuel cycle facilities. Based on the fundamentals of the theory of systems, the four levels of system thinking, and the relationship of eight socio technical factors, a mental model has been developed for safety management in the nuclear fuel cycle context. From this conceptual model, safety archetypes were constructed in order to identify and highlight the processes of change and decision making that allow the system to migrate to a state of loss of safety. After that, stock and flow diagrams were created so that their behavior could be assessed by the system's dynamics. The results from the analysis using the model that simulates the dynamic behavior of the variables (socio technical factors) indicated, as expected, that the system's dynamics proved to be an appropriate and efficient tool for modeling fuel cycle safety as an emergent property. (author)

Prevalence of conventional risk factors and lipid profiles in patients with acute coronary syndrome and significant coronary disease

Directory of Open Access Journals (Sweden)

González-Pacheco H

2014-10-01

Full Text Available Héctor González-Pacheco,1 Jesús Vargas-Barrón,2 Maite Vallejo,2 Yigal Piña-Reyna,3 Alfredo Altamirano-Castillo,1 Pedro Sánchez-Tapia,1 Carlos Martínez-Sánchez1 1Coronary Care Unit, National Institute of Cardiology in Mexico City, Mexico City, Mexico; 2Department of Clinical Research, National Institute of Cardiology in Mexico City, Mexico City, Mexico; 3Catheterization Laboratory, National Institute of Cardiology in Mexico City, Mexico City, Mexico Background: Among patients with coronary artery disease (CAD, 80%–90% present at least one conventional risk factor. On the other hand, lipid profile modification after a cardiovascular event related to acute coronary syndrome (ACS has been recognized. The prevalence of conventional risk factors and the lipid profile at the time of admission in patients with ACS and significant CAD (stenosis ≥50% determined through coronary angiography is not well described. Methods: We studied 3,447 patients with a diagnosis of ACS and significant CAD with stenosis ≥50%, as shown on angiography. We recorded the presence of conventional risk factors, including smoking, hypertension, dyslipidemia, and diabetes. In addition, we analyzed the lipid profiles within the first 24 hours of admission. We analyzed the studied population and compared findings according to sex.Results: Most patients (81.7% were male. ST-elevation myocardial infarction was present in 51.3% of patients, and non-ST-elevation acute coronary syndrome was present in 48.7%. The most frequent risk factor was smoking, which was present in 68% of patients, followed by hypertension (57.8%, dyslipidemia (47.5%, and diabetes (37.7%. In women, the most frequent risk factors were hypertension, diabetes, and dyslipidemia, whereas in men, smoking was the most frequent. We identified at least one risk factor in 95.7% of all patients, two or three risk factors in 62%, and four risk factors in 8.6% of patients. The lipid profile analysis revealed that

Diagnostic development for current density profile control at KSTAR

Energy Technology Data Exchange (ETDEWEB)

Ko, J., E-mail: jinseok@nfri.re.kr [National Fusion Research Institute, Daejeon 34133 (Korea, Republic of); University of Science and Technology, Daejeon 34113 (Korea, Republic of); Chung, J. [National Fusion Research Institute, Daejeon 34133 (Korea, Republic of); Messmer, M.C.C. [Department of Applied Physics, Eindhoven University of Technology, Eindhoven (Netherlands)

2016-11-01

Highlights: • The motional Stark effect (MSE) diagnostic installed at KSTAR. • Engineering challenges and solutions on the design and fabrication of the front optics housing and filter modules. • Characterization of the bandpass filters and the responses to polarized light. - Abstract: The current density profile diagnostics are critical for the control of the steady-state burning plasma operations. A multi-channel motional Stark effect (MSE) diagnostic system has been implemented for the measurements of the internal magnetic field structures that constrain the magnetic equilibrium reconstruction to accurately produce the tokamak safety factor and current density profiles for the Korea Superconducting Tokamak Advanced Research (KSTAR). This work presents the design and fabrication of the front optics and the filter modules and the calibration activities for the MSE diagnostic at KSTAR.

Measuring Safety Culture on Ships Using Safety Climate: A Study among Indian Officers

Directory of Open Access Journals (Sweden)

Yogendra Bhattacharya

2015-12-01

Full Text Available Workplace safety continues to be an area of concern in the maritime industry due to the international nature of the operations. The effectiveness of extensive legislation to manage shipboard safety remains in doubt. The focus must therefore shift towards the human element - seafarers and their perceptions of safety. The study aims to understand the alignment that exists between safety culture and safety climate on board ships as perceived by seafarers. The underlying factors of safety climate were identified using factor analysis which isolated seven factors - Support on Safety, Organizational Support, Resource Availability, Work Environment, Job Demands, ‘Just’ Culture, and Safety Compliance. The perception of safety level of seafarers was found to be low indicating the existence of misalignments between safety culture values and the actual safety climate. The study also reveals that the safety perceptions of officers employed directly by ship owners and those by managers do not differ significantly, nor do they differ between senior and junior officers. A shift in perspective towards how seafarers themselves feel towards safety might provide more effective solutions – instead of relying on regulations - and indeed aid in reducing incidents on board. This paper details practical suggestions on how to identify the factors that contribute towards a better safety climate on board ships.

Infrastructural and Human Factors Affecting Safety Outcomes of Cyclists

Directory of Open Access Journals (Sweden)

Sergio Useche

2018-01-01

Full Text Available The increasing number of registered road crashes involving cyclists during the last decade and the high proportion of road crashes resulting in severe injuries and fatalities among cyclists constitutes a global issue for community health, urban development and sustainability. Nowadays, the incidence of many risk factors for road crashes of cyclists remains largely unexplained. Given the importance of this issue, the present study has been conducted with the aim of determining relationships between infrastructural, human factors and safety outcomes of cyclists. Objectives: This study aimed, first, to examine the relationship between key infrastructural and human factors present in cycling, bicycle-user characteristics and their self-reported experience with road crashes. And second, to determine whether a set of key infrastructural and human factors may predict their self-reported road crashes. Methods: For this cross-sectional study, a total of 1064 cyclists (38.8% women, 61.2% men; M = 32.8 years of age from 20 different countries across Europe, South America and North America, participated in an online survey composed of four sections: demographic data and cycling-related factors, human factors, perceptions on infrastructural factors and road crashes suffered. Results: The results of this study showed significant associations between human factors, infrastructural conditions and self-reported road crashes. Also, a logistic regression model found that self-reported road crashes of cyclists could be predicted through variables such as age, riding intensity, risky behaviours and problematic user/infrastructure interactions. Conclusions: The results of this study suggest that self-reported road crashes of cyclists are influenced by features related to the user and their interaction with infrastructural characteristics of the road.

Opportunities for improved diabetes care among patients of safety net practices: a safety net providers' strategic alliance study.

Science.gov (United States)

Reichsman, Ann; Werner, James; Cella, Peggi; Bobiak, Sarah; Stange, Kurt C

2009-01-01

To identify barriers and opportunities for quality diabetes care in safety net practices. In 3 federally qualified health centers and 1 free clinic, 19 primary care clinicians profiled patient and visit characteristics and quality of care measures for 181 consecutive visits by adult type 2 diabetic patients. Open-ended questions assessed patient and clinician perception of barriers to diabetes care and patient report of enabling factors. A multidisciplinary team identified themes from open-ended responses. Logistic regression analyses assessed the association of the identified barriers/enablers with 2 measures of quality care: glycosylated hemoglobin and prophylactic aspirin use. Ranked barriers noted by patients included adherence (40%), financial/insurance (23%), and psychosocial (13%) factors. Clinicians ranked systemic factors, including financial/ insurance (32%) and cultural/psychosocial (29%) factors, as important to adherence (29%) in determining quality diabetes care. Patients reported dietary and medical adherence (37%) and family/health care worker support (17%) as helpful factors. Among 175 patients with available data, glycosylated hemoglobin levels were associated with patient report of financial/insurance factors both as a barrier when visits and medications were unaffordable and as an opportunity when free or low-cost medications and services were provided. Patients' adherence with aspirin prophylaxis was strongly associated with African American race, prior prescription of aspirin and distribution of aspirin at the practice site (p<.001). Patients were less likely than clinicians to identify systemic and contextual factors contributing to poor diabetes care. From the front line's perspective, enabling patient self-management and systemic support is a target for improving diabetes care in safety net practices.

Food safety knowledge and practices of abattoir and butchery shops and the microbial profile of meat in Mekelle City, Ethiopia

Science.gov (United States)

Haileselassie, Mekonnen; Taddele, Habtamu; Adhana, Kelali; Kalayou, Shewit

2013-01-01

Objective To assess the food safety knowledge and practices in meat handling, and to determine microbial load and pathogenic organisms in meat at Mekelle city. Methods A descriptive survey design was used to answer questions concerning the current status of food hygiene and sanitation practiced in the abattoir and butcher shops. Workers from the abattoir and butcher shops were interviewed through a structured questionnaire to assess their food safety knowledge. Bacterial load was assessed by serial dilution method and the major bacterial pathogens were isolated by using standard procedures. Results 15.4% of the abattoir workers had no health certificate and there was no hot water, sterilizer and cooling facility in the abattoir. 11.3% of the butchers didn't use protective clothes. There was a food safety knowledge gap within the abattoir and butcher shop workers. The mean values of bacterial load of abattoir meat, butcher shops and street meat sale was found to be 1.1×105, 5.6×105 and 4.3×106 cfu/g, respectively. The major bacterial pathogens isolated were Escherichia coli, Staphylococcus aureus and Bacillus cereus. Conclusions The study revealed that there is a reasonable gap on food safety knowledge by abattoir and butcher shop workers. The microbial profile was also higher compared to standards set by World Health Organization. Due attention should be given by the government to improve the food safety knowledge and the quality standard of meat sold in the city. PMID:23646306

Investigation of occupational health and safety application using the internal and external factor assessment matrix: SWOT

Directory of Open Access Journals (Sweden)

2012-09-01

Material and Method: IIn this study, the threats, opportunities, weaknesses and strengths were evaluated by one of the tools named SWOT, in one of the assembly industries company in Iran, in order to controlling the operations in this company considering to safety and health standard (OHSAS18001. A comparison of the company’s performance in implementing the safety and health standards was done between years 1387 and 1388 contain in the Company considered, and weighted scoring weaknesses, strengths, threats and opportunities using the matrix of internal factors (strengths and weaknesses and external factors (treats and opportunities then, the importance of each factor were determined in the company’s implementation and enforcement of those standards. . Result: Focusing on the strengths and weaknesses, opportunities and threats, some strategies to improve the implementation were presented. Any points were weighted based on the most important weaknesses identified as the lack of monitoring contractors, lack of management commitment for implementation of OHSAS18001, no attempt to identify the risks of change, lack of training needs assessment, main strengths identified in the context of adequate budget health and safety, environmental efforts, identify risk for abnormal conditions, the most important threats for immediate delivery customer orders and the opportunity to support the safety and health plans, were determined. . Conclusion: Sum of the weighted scores in year 87 were obtained for the external factors (opportunities and threats, 2.16 and internal factors (strengths and weaknesses 1.66. Both of these scores were less than 2.5 (minimum amount of the acceptable rate so, the company has been poor performance in the implementation of this standard for the year 87 and a weak reaction in the use of opportunities and the minimize threats has. In case of internal factors, it was worse than external one and the situation was more bold of the weaknesses companies to

Coagulation Profile as a Risk Factor for 30-day Morbidity Following Cervical Laminectomy and Fusion.

Science.gov (United States)

Bronheim, Rachel S; Oermann, Eric K; Cho, Samuel K; Caridi, John M

2018-02-15

Retrospective analysis of prospectively collected data. The aim of this study was to determine the ability of abnormal coagulation profile to predict adverse events following posterior cervical laminectomy and fusion (PCLF). PCLF is an increasingly common procedure used to treat a variety of traumatic and degenerative spinal conditions. Abnormal coagulation profile is associated with postoperative adverse events, including blood transfusion. There is a paucity of literature that specifically addresses the relationship between coagulation profile and complications following PCLF. ACS-NSQIP was utilized to identify patients undergoing PCLF between 2006 and 2013. A total of 3546 patients met inclusion criteria. Multivariate analysis was utilized to identify associations between abnormal coagulation profile and postoperative complications. Membership in the low-platelet cohort was an independent risk factor for myocardial infarction (Odds Ratio (OR) = 5.4 [1.0, 29.1], P = 0.049) and bleeding transfusion (OR = 2.0 [1.2, 3.4], P = 0.011). Membership in the high international normalized ratio group was an independent risk factor for pneumonia (OR = 6.3 [2.5, 16.1], P 48 hours (OR = 6.5 [2.3, 18.4], P 48 hours (OR = 4.8 [1.9, 12.4], P = 0.001), cerebrovascular accident/stroke with neurological deficit (OR = 24.8 [2.9, 210.6], P = 0.003), bleeding transfusion (OR = 2.1 [1.1, 4.1], P = 0.032), reoperation (OR = 3.6 [1.4, 9.3], P = 0.008), and sepsis (OR = 3.4 [1.1, 10.4], P = 0.031). This is the first large study to document abnormal coagulation profile as an independent predictor of outcomes following PCLF. Abnormal coagulation profile represents a predictor of complications that can be medically mitigated, and is therefore a valuable parameter to assess preoperatively. Coagulation profile should continue to play a role in targeting patients for risk stratification, preoperative optimization, and

An Analysis of Trainers' Perspectives within an Ecological Framework: Factors that Influence Mine Safety Training Processes.

Science.gov (United States)

Haas, Emily J; Hoebbel, Cassandra L; Rost, Kristen A

2014-09-01

Satisfactory completion of mine safety training is a prerequisite for being hired and for continued employment in the coal industry. Although training includes content to develop skills in a variety of mineworker competencies, research and recommendations continue to specify that specific limitations in the self-escape portion of training still exist and that mineworkers need to be better prepared to respond to emergencies that could occur in their mine. Ecological models are often used to inform the development of health promotion programs but have not been widely applied to occupational health and safety training programs. Nine mine safety trainers participated in in-depth semi-structured interviews. A theoretical analysis of the interviews was completed via an ecological lens. Each level of the social ecological model was used to examine factors that could be addressed both during and after mine safety training. The analysis suggests that problems surrounding communication and collaboration, leadership development, and responsibility and accountability at different levels within the mining industry contribute to deficiencies in mineworkers' mastery and maintenance of skills. This study offers a new technique to identify limitations in safety training systems and processes. The analysis suggests that training should be developed and disseminated with consideration of various levels-individual, interpersonal, organizational, and community-to promote skills. If factors identified within and between levels are addressed, it may be easier to sustain mineworker competencies that are established during safety training.

Measurement of Food Safety Culture using Survey and Maturity Profiling Tools

OpenAIRE

Jespersen, Lone; Griffiths, Mansel; Maclaurin, Tanya; Chapman, Ben; Wallace, Carol A.

2016-01-01

Organizational culture is defined by dimensions and characteristics that can be used to measure food safety culture in food manufacturing through a food safety maturity model. Maturity models from quality, health care, and information technology have been used since early 1970 and this work presents a novel food safety culture maturity model with five capability areas and food safety pinpointed behaviours specific to functions and levels in a food manufacturing company. A survey tool linked t...

Safety and Efficacy of BAY 94-9027, a Prolonged-Half-Life Factor VIII

DEFF Research Database (Denmark)

Reding, M T; Ng, H J; Poulsen, Lone Hvitfeldt

2017-01-01

BACKGROUND: BAY 94-9027 is a B-domain-deleted prolonged-half-life recombinant factor VIII (FVIII) conjugates in a site-specific manner with polyethylene glycol. OBJECTIVE: Assess efficacy and safety of BAY 94-9027 for prophylaxis and treatment of bleeds in patients with severe hemophilia A PATIEN...

Safety assessment of human and organizational factors in French fuel cycle facilities

International Nuclear Information System (INIS)

Menuet, Lise; Beauquier, Sophie

2013-01-01

According to the French law, each nuclear facility has to provide a safety demonstration every ten years. The assessment of this demonstration supports the decision of the French Safety Authority regarding the authorisation of operating for the ten years to come. In addition, transversal topics, which are linked with safety performance, such as safety management, management of competencies, maintenance's policy are periodically evaluated. One aspect of these assessments relates to Human and Organizational Factors (HOF) and their contribution to safety. Our communication will describe the assessment of the HOF-related part, performed by the Institute for Radioprotection and Nuclear Safety Institute (IRSN) the Technical Support Organisation of the French Safety Authority). It will focus on the methodological framework, the tools which are developed and used for assessing the integration of HOF in safety demonstration, and the main difficulties of this kind of assessment. Each situation will be illustrated by concrete examples coming from safety assessments concerning fuel cycle's plants: Areva's plants dedicated to uranium conversion, uranium enrichment, fuel manufacturing, spent fuel reprocessing, treatment facilities and CEA's laboratories dedicated to research and development and to interim spent fuel storage. The methodological framework for assessing HOF currently implements three main steps which will be precisely described: - checking that the nuclear plant has made an exhaustive analysis of the risks linked with HOF. Regarding to HOF, the Licensee safety demonstration is based on the description of the main human activities which are considered as hazardous regarding safety. These activities are accomplished with a human contribution and they require a safe realisation. - assessing the human, organisational and technical barriers that the nuclear plant have planed in order to make the operations safe, to avoid, prevent or detect an

A predictable Java profile

DEFF Research Database (Denmark)

Bøgholm, Thomas; Hansen, Rene Rydhof; Ravn, Anders Peter

2009-01-01

A Java profile suitable for development of high integrity embedded systems is presented. It is based on event handlers which are grouped in missions and equipped with respectively private handler memory and shared mission memory. This is a result of our previous work on developing a Java profile......, and is directly inspired by interactions with the Open Group on their on-going work on a safety critical Java profile (JSR-302). The main contribution is an arrangement of the class hierarchy such that the proposal is a generalization of Real-Time Specification for Java (RTSJ). A further contribution...

Calibration of partial safety factors for wind turbine rotor blades against fatigue failure; Kalibrering af partielle sikkerhedsfaktorer for udmattelse af vindmoellerotorer

Energy Technology Data Exchange (ETDEWEB)

Christensen, C.J.; Ronold, K.O.; Thoegersen, M.L.

2000-08-01

The report describes a calibration of partial safety factors for wind turbine rotor blades subjected to fatigue loading in flapwise and edgewise bending. While earlier models - developed by the authors - dealt with such calibrations for site-specific individual turbines only, the calibration model applied herein covers an integrated analysis with different turbines on different sites and with different blade materials. The result is an optimized set of partial safety factors, i.e. a set of safety factors that lead to minimum deviation from the target reliability of the achieved reliabilities over the selected scope of turbines, sites and materials. The turbines included in the study cover rated powers of 450-600 kW. The result from the calibration are discussed in relation to the partial safety factors that are given in the Danish codes for design of glass fibre reinforced rotor blades (DS472 and DS456). (au)

Cardiovascular risk-benefit profile of sibutramine.

Science.gov (United States)

Scheen, A J

2010-01-01

Sibutramine is a combined norepinephrine and serotonin reuptake inhibitor used as an antiobesity agent to reduce appetite and promote weight loss in combination with diet and exercise. At a daily dose of 10-20 mg, it was initially considered to have a good safety profile, as it does not induce primary pulmonary hypertension or adverse effects on cardiac valves, in contrast to previous reports relating to some other antiobesity agents. However, it exerts disparate effects on cardiovascular risk factors. On the one hand, sibutramine may have antiatherogenic activities, as it improves insulin resistance, glucose metabolism, dyslipidemia, and inflammatory markers, with most of these effects resulting from weight loss rather than from an intrinsic effect of the drug. On the other hand, because of its specific mode of action, sibutramine exerts a peripheral sympathomimetic effect, which induces a moderate increase in heart rate and attenuates the reduction in BP attributable to weight loss or even slightly increases BP. It may also prolong the QT interval, an effect that could induce arrhythmias. Because of these complex effects, it is difficult to conclude what the final impact of sibutramine on cardiovascular outcomes might be. Sibutramine has been shown to exert favorable effects on some surrogate cardiovascular endpoints such as reduction of left ventricular hypertrophy and improvement of endothelial dysfunction. A good cardiovascular safety profile was demonstrated in numerous 1- to 2-year controlled trials, in both diabetic and nondiabetic well selected patients, as well as in several observational studies. However, since 2002, several cardiovascular adverse events (hypertension, tachycardia, arrhythmias, and myocardial infarction) have been reported in sibutramine-treated patients. This led to a contraindication of the use of this antiobesity agent in patients with established coronary heart disease, previous stroke, heart failure, or cardiac arrhythmias. SCOUT

An Analysis of Trainers' Perspectives within an Ecological Framework: Factors that Influence Mine Safety Training Processes

Directory of Open Access Journals (Sweden)

Emily J. Haas

2014-09-01

Conclusion: This study offers a new technique to identify limitations in safety training systems and processes. The analysis suggests that training should be developed and disseminated with consideration of various levels—individual, interpersonal, organizational, and community—to promote skills. If factors identified within and between levels are addressed, it may be easier to sustain mineworker competencies that are established during safety training.

Multilevel Safety Climate and Safety Performance in the Construction Industry: Development and Validation of a Top-Down Mechanism

Directory of Open Access Journals (Sweden)

Ran Gao

2016-11-01

Full Text Available The character of construction projects exposes front-line workers to dangers and accidents. Safety climate has been confirmed to be a predictor of safety performance in the construction industry. This study aims to explore the underlying mechanisms of the relationship between multilevel safety climate and safety performance. An integrated model was developed to study how particular safety climate factors of one level affect those of other levels, and then affect safety performance from the top down. A questionnaire survey was administered on six construction sites in Vietnam. A total of 1030 valid questionnaires were collected from this survey. Approximately half of the data were used to conduct exploratory factor analysis (EFA and the remaining data were submitted to structural equation modeling (SEM. Top management commitment (TMC and supervisors’ expectation (SE were identified as factors to represent organizational safety climate (OSC and supervisor safety climate (SSC, respectively, and coworkers’ caring and communication (CCC and coworkers’ role models (CRM were identified as factors to denote coworker safety climate (CSC. SEM results show that OSC factor is positively related to SSC factor and CSC factors significantly. SSC factor could partially mediate the relationship between OSC factor and CSC factors, as well as the relationship between OSC factor and safety performance. CSC factors partially mediate the relationship between OSC factor and safety performance, and the relationship between SSC factor and safety performance. The findings imply that a positive safety culture should be established both at the organizational level and the group level. Efforts from all top management, supervisors, and coworkers should be provided to improve safety performance in the construction industry.

Multilevel Safety Climate and Safety Performance in the Construction Industry: Development and Validation of a Top-Down Mechanism.

Science.gov (United States)

Gao, Ran; Chan, Albert P C; Utama, Wahyudi P; Zahoor, Hafiz

2016-11-08

The character of construction projects exposes front-line workers to dangers and accidents. Safety climate has been confirmed to be a predictor of safety performance in the construction industry. This study aims to explore the underlying mechanisms of the relationship between multilevel safety climate and safety performance. An integrated model was developed to study how particular safety climate factors of one level affect those of other levels, and then affect safety performance from the top down. A questionnaire survey was administered on six construction sites in Vietnam. A total of 1030 valid questionnaires were collected from this survey. Approximately half of the data were used to conduct exploratory factor analysis (EFA) and the remaining data were submitted to structural equation modeling (SEM). Top management commitment (TMC) and supervisors' expectation (SE) were identified as factors to represent organizational safety climate (OSC) and supervisor safety climate (SSC), respectively, and coworkers' caring and communication (CCC) and coworkers' role models (CRM) were identified as factors to denote coworker safety climate (CSC). SEM results show that OSC factor is positively related to SSC factor and CSC factors significantly. SSC factor could partially mediate the relationship between OSC factor and CSC factors, as well as the relationship between OSC factor and safety performance. CSC factors partially mediate the relationship between OSC factor and safety performance, and the relationship between SSC factor and safety performance. The findings imply that a positive safety culture should be established both at the organizational level and the group level. Efforts from all top management, supervisors, and coworkers should be provided to improve safety performance in the construction industry.

Changes in risk factor profile after ischemic stroke

DEFF Research Database (Denmark)

Hornnes, Nete

up 1 year after stroke. We constructed a baseline risk factor profile (RFP) of 6 variables: smoking, excessive drinking, physical inactivity, untreated hypertension, no cholesterol-lowering, and no antithrombotic treatment/warfarin at discharge from hospital. Each item was rated 0 or 1 giving...... a maximum score of 6 points. Mean baseline RFP-score was 1.6 Results. After 1 year we found a reduction in current smoking (p=0.008) and in excessive drinking (p=0.0001). There was no change in physical activity and in untreated hypertension. There was an increase in the proportion of patients on lipid......-lowering (p=0.011) and antithrombotic (p=0.0003) treatment yielding a reduction in RFP to 1.4 (phypertensive, and most patients with untreated hypertension and hypercholesterolemia remained untreated. By 1-year follow up 30 patients (9.4%) had had a non...

Safety climate and safety behaviors in the construction industry: The importance of co-workers commitment to safety.

Science.gov (United States)

Schwatka, Natalie V; Rosecrance, John C

2016-06-16

There is growing empirical evidence that as safety climate improves work site safety practice improve. Safety climate is often measured by asking workers about their perceptions of management commitment to safety. However, it is less common to include perceptions of their co-workers commitment to safety. While the involvement of management in safety is essential, working with co-workers who value and prioritize safety may be just as important. To evaluate a concept of safety climate that focuses on top management, supervisors and co-workers commitment to safety, which is relatively new and untested in the United States construction industry. Survey data was collected from a cohort of 300 unionized construction workers in the United States. The significance of direct and indirect (mediation) effects among safety climate and safety behavior factors were evaluated via structural equation modeling. Results indicated that safety climate was associated with safety behaviors on the job. More specifically, perceptions of co-workers commitment to safety was a mediator between both management commitment to safety climate factors and safety behaviors. These results support workplace health and safety interventions that build and sustain safety climate and a commitment to safety amongst work teams.

Dependence of the DIII-D beta limit on the current profile

Energy Technology Data Exchange (ETDEWEB)

Strait, E.J.; Chu, M.S.; Ferron, J.R.; Lao, L.L.; Osborne, T.H.; Taylor, T.S.; Turnbull, A.D. (General Atomics, San Diego, CA (United States)); Lazarus, E.A. (Oak Ridge National Lab., TN (United States))

1991-01-01

The maximum beta values achieved in DIII-D are not fully described by the simple scaling law [beta][sub max][proportional to]I/aB. There is, in addition, a dependence on the form of the current profile as parameterized by the safety factor q and internal inductance l[sub i]. The maximum experimentally achieved value of normalized beta [beta][sub N] = [beta]/(I/aB) varies from 3.5 at low safety factor q (q[sub 95]<3) to 5 at higher values of q. At low q, discharges are terminated by disruptions at high [beta][sub N] and at both the low and high l[sub i] boundaries of the stable range. These disruptions are attributed to external and global kink modes. At higher q, such disruptions are much less frequent, and beta is limited by slowly growing resistive modes, fishbones, and possibly by ballooning modes. At each value of q, the maximum beta tends to increase with internal inductance l[sub i]. A numerical study of kink mode stability has shown a similar trend for optimized pressure profiles. These observations have suggested a new scaling law for the operational beta limit: [beta][sub max]=4l[sub i](I/aB), which fits the DIII-D data well. (author) 13 refs., 4 figs.

Safety evaluation of zotepine for the treatment of schizophrenia.

Science.gov (United States)

Riedel, Michael; Musil, Richard; Seemüller, Florian; Spellmann, Ilja; Möller, Hans-Jürgen; Schennach-Wolff, Rebecca

2010-07-01

Atypical antipsychotics have become the first-line treatment for patients suffering from schizophrenia in the industrialized world. Given the frequent necessity of a life-long enduring antipsychotic treatment, the compounds' safety profile is of great importance for patients and caregivers. Zotepine is an antipsychotic with atypical properties and previous data have suggested a very favorable side effect profile. The aim of this review is to provide a broad knowledge base on the safety profile of zotepine deriving from currently available research results published in English medical databases. The focus of this research reports starts in the 1990s with zotepine's approval in Europe. This paper incorporates data on placebo-controlled studies of zotepine as well as studies with comparator compounds also beyond the diagnostic boarder of schizophrenia regarding zotepine's safety. The take home message of this safety evaluation of zotepine is that compared to typical compounds zotepine induces less extrapyramidal side effects; however, in terms of comparing zotepine's safety with other atypical antipsychotics more studies are needed to draw final conclusions.

Analysis of human factors effects on the safety of transporting radioactive waste materials: Technical report

Energy Technology Data Exchange (ETDEWEB)

Abkowitz, M.D.; Abkowitz, S.B.; Lepofsky, M.

1989-04-01

This report examines the extent of human factors effects on the safety of transporting radioactive waste materials. It is seen principally as a scoping effort, to establish whether there is a need for DOE to undertake a more formal approach to studying human factors in radioactive waste transport, and if so, logical directions for that program to follow. Human factors effects are evaluated on driving and loading/transfer operations only. Particular emphasis is placed on the driving function, examining the relationship between human error and safety as it relates to the impairment of driver performance. Although multi-modal in focus, the widespread availability of data and previous literature on truck operations resulted in a primary study focus on the trucking mode from the standpoint of policy development. In addition to the analysis of human factors accident statistics, the report provides relevant background material on several policies that have been instituted or are under consideration, directed at improving human reliability in the transport sector. On the basis of reported findings, preliminary policy areas are identified. 71 refs., 26 figs., 5 tabs.

Power profiling of Cholesky and QR factorizations on distributed memory systems

KAUST Repository

Bosilca, George

2012-08-30

This paper presents the power profile of two high performance dense linear algebra libraries on distributed memory systems, ScaLAPACK and DPLASMA. From the algorithmic perspective, their methodologies are opposite. The former is based on block algorithms and relies on multithreaded BLAS and a two-dimensional block cyclic data distribution to achieve high parallel performance. The latter is based on tile algorithms running on top of a tile data layout and uses fine-grained task parallelism combined with a dynamic distributed scheduler (DAGuE) to leverage distributed memory systems. We present performance results (Gflop/s) as well as the power profile (Watts) of two common dense factorizations needed to solve linear systems of equations, namely Cholesky and QR. The reported numbers show that DPLASMA surpasses ScaLAPACK not only in terms of performance (up to 2X speedup) but also in terms of energy efficiency (up to 62 %). © 2012 Springer-Verlag (outside the USA).

Performance of food safety management systems in poultry meat preparation processing plants in relation to Campylobacter spp. contamination.

Science.gov (United States)

Sampers, Imca; Jacxsens, Liesbeth; Luning, Pieternel A; Marcelis, Willem J; Dumoulin, Ann; Uyttendaele, Mieke

2010-08-01

A diagnostic instrument comprising a combined assessment of core control and assurance activities and a microbial assessment instrument were used to measure the performance of current food safety management systems (FSMSs) of two poultry meat preparation companies. The high risk status of the company's contextual factors, i.e., starting from raw materials (poultry carcasses) with possible high numbers and prevalence of pathogens such as Campylobacter spp., requires advanced core control and assurance activities in the FSMS to guarantee food safety. The level of the core FSMS activities differed between the companies, and this difference was reflected in overall microbial quality (mesophilic aerobic count), presence of hygiene indicators (Enterobacteriaceae, Staphylococcus aureus, and Escherichia coli), and contamination with pathogens such as Salmonella, Listeria monocytogenes, and Campylobacter spp. The food safety output expressed as a microbial safety profile was related to the variability in the prevalence and contamination levels of Campylobacter spp. in poultry meat preparations found in a Belgian nationwide study. Although a poultry meat processing company could have an advanced FSMS in place and a good microbial profile (i.e., lower prevalence of pathogens, lower microbial numbers, and less variability in microbial contamination), these positive factors might not guarantee pathogen-free products. Contamination could be attributed to the inability to apply effective interventions to reduce or eliminate pathogens in the production chain of (raw) poultry meat preparations.

Geometrical and profile effects on toroidicity and ellipticity induced Alfven eigenmodes

International Nuclear Information System (INIS)

Villard, L.; Fu, G.Y.

1992-04-01

The wave structures, eigenfrequencies and damping rates of toroidicity and ellipticity induced Alfven eigenmodes (TAE, EAE) of low toroidal mode numbers (n) are calculated in various axisymmetric ideal MHD equilibria with the global wave finite element code LION. The importance of safety factor (q) and density (ρ) profiles on continuum damping rates is analysed. For realistic profiles several continuum gaps exist in the plasma discharge. Frequency misalignment of these gaps yields continuum damping rates γ/ω of the order of a few percent. Finite β pol lowers the TAE eigenfrequency. For β values below the Troyon limit the TAE enters the continuum and can thus be stabilized. Finite elongation allows the EAE to exist but triangularity can have a stabilizing effect through coupling to the continuum. The localization of TAE and EAE eigenfunctions is found to increase with the shear and with n. Therefore large shear, through enhanced Landau and collisional damping, is a stabilizing factor for TAE and EAE modes. (author) 16 figs., 28 refs

Consideration of the FQPA Safety Factor and Other Uncertainty Factors in Cumulative Risk Assessment of Chemicals Sharing a Common Mechanism of Toxicity

Science.gov (United States)

This guidance document provides OPP's current thinking on application of the provision in FFDCA about an additional safety factor for the protection of infants and children in the context of cumulative risk assessments.

Insulin-Like Growth Factor-1 Inscribes a Gene Expression Profile for Angiogenic Factors and Cancer Progression in Breast Epithelial Cells

Directory of Open Access Journals (Sweden)

J.S. Oh

2002-01-01

Full Text Available Activation of the insulin-like growth factor-1 receptor (IGF-11R by IGF-1 is associated with the risk and progression of many types of cancer, although despite this it remains unclear how activated IGF-1 R contributes to cancer progression. In this study, gene expression changes elicited by IGF-1 were profiled in breast epithelial cells. We noted that many genes are functionally linked to cancer progression and angiogenesis. To validate some of the changes observed, the RNA and/or protein was confirmed for c-fos, cytochrome P4501Al, cytochrome P450 1131, interleukin-1 beta, fas ligand, vascular endothelial growth factor, and urokinase plasminogen activator. Nuclear proteins were also temporally monitored to address how gene expression changes were regulated. We found that IGF-1 stimulated the nuclear translocation of phosphorylated AKT, hypoxic-inducible factor-1 alpha, and phosphorylated cAMP-responsive element-binding protein, which correlated with temporal changes in gene expression. Next, the promoter regions of IGF-1-regulated genes were searched in silico. The promoters of genes that clustered together had similar regulatory regions. In summary, IGF-1 inscribes a gene expression profile relevant to cancer progression, and this study provides insight into the mechanism(s whereby some of these changes occur.

Efficacy and Safety Profile of Tricyclo-DNA Antisense Oligonucleotides in Duchenne Muscular Dystrophy Mouse Model

Directory of Open Access Journals (Sweden)

Karima Relizani

2017-09-01

Full Text Available Antisense oligonucleotides (AONs hold promise for therapeutic splice-switching correction in many genetic diseases. However, despite advances in AON chemistry and design, systemic use of AONs is limited due to poor tissue uptake and sufficient therapeutic efficacy is still difficult to achieve. A novel class of AONs made of tricyclo-DNA (tcDNA is considered very promising for the treatment of Duchenne muscular dystrophy (DMD, a neuromuscular disease typically caused by frameshifting deletions or nonsense mutations in the gene-encoding dystrophin and characterized by progressive muscle weakness, cardiomyopathy, and respiratory failure in addition to cognitive impairment. Herein, we report the efficacy and toxicology profile of a 13-mer tcDNA in mdx mice. We show that systemic delivery of 13-mer tcDNA allows restoration of dystrophin in skeletal muscles and to a lower extent in the brain, leading to muscle function improvement and correction of behavioral features linked to the emotional/cognitive deficiency. More importantly, tcDNA treatment was generally limited to minimal glomerular changes and few cell necroses in proximal tubules, with only slight variation in serum and urinary kidney toxicity biomarker levels. These results demonstrate an encouraging safety profile for tcDNA, albeit typical of phosphorothiate AONs, and confirm its therapeutic potential for the systemic treatment of DMD patients. Keywords: antisense oligonucleotides, Duchenne muscular dystrophy, preclinical, splice switching, tcDNA-AONs

Safety Profile of Eslicarbazepine Acetate as Add-On Therapy in Adults with Refractory Focal-Onset Seizures: From Clinical Studies to 6 Years of Post-Marketing Experience.

Science.gov (United States)

Gama, Helena; Vieira, Mariana; Costa, Raquel; Graça, Joana; Magalhães, Luís M; Soares-da-Silva, Patrício

2017-12-01

Eslicarbazepine acetate was first approved in the European Union in 2009 as adjunctive therapy in adults with partial-onset seizures with or without secondary generalization. The objective of this study was to review the safety profile of eslicarbazepine acetate analyzing the data from several clinical studies to 6 years of post-marketing surveillance. We used a post-hoc pooled safety analysis of four phase III, double-blind, randomized, placebo-controlled studies (BIA-2093-301, -302, -303, -304) of eslicarbazepine acetate as add-on therapy in adults. Safety data of eslicarbazepine acetate in special populations of patients aged ≥65 years with partial-onset seizures (BIA-2093-401) and subjects with moderate hepatic impairment (BIA-2093-111) and renal impairment (BIA-2093-112) are also considered. The incidences of treatment-emergent adverse events, treatment-emergent adverse events leading to discontinuation, and serious adverse events were analyzed. The global safety database of eslicarbazepine acetate was analyzed for all cases from post-marketing surveillance from 1 October, 2009 to 21 October, 2015. From a pooled analysis of four phase III studies, it was concluded that the incidence of treatment-emergent adverse events, treatment-emergent adverse events leading to discontinuation, and adverse drug reactions were dose dependent. Dizziness, somnolence, headache, and nausea were the most common treatment-emergent adverse events (≥10% of patients) and the majority were of mild-to-moderate intensity. No dose-dependent trend was observed for serious adverse events and individual serious adverse events were reported in less than 1% of patients. Hyponatremia was classified as a possibly related treatment-emergent adverse event in phase III studies (1.2%); however, after 6 years of post-marketing surveillance it represents the most frequently (10.2%) reported adverse drug reaction, with more than half of these cases occurring with eslicarbazepine acetate at

Real-Life Efficacy, Immunogenicity and Safety of Biosimilar Infliximab.

Science.gov (United States)

Vegh, Zsuzsanna; Kurti, Zsuzsanna; Lakatos, Peter L

2017-01-01

Recently, the use of biosimilar infliximab (IFX) in the treatment of inflammatory bowel diseases has become widespread in some European and non-European countries. Data on the efficacy, safety and immunogenicity from real-life cohorts are accumulating. The first reports showed similar outcomes in the induction and maintenance of remission, mucosal healing, safety and immunogenicity profile to the originator IFX. In the present review, we aimed to summarize the existing knowledge on the efficacy, safety and immunogenicity profile of biosimilar IFX reported from real-life cohorts. © 2017 S. Karger AG, Basel.

Time evolution of the energy confinement time, internal inductance and effective edge safety factor on IR-T1 tokamak

International Nuclear Information System (INIS)

Salar Elahi, A; Ghoranneviss, M

2010-01-01

An attempt is made to investigate the time evolution of the energy confinement time, internal inductance and effective edge safety factor on IR-T1 tokamak. For this purpose, four magnetic pickup coils were designed, constructed and installed on the outer surface of the IR-T1 and then the Shafranov parameter (asymmetry factor) was obtained from them. On the other hand, also a diamagnetic loop was designed and installed on IR-T1 and poloidal beta was determined from it. Therefore, the internal inductance and effective edge safety factor were measured. Also, the time evolution of the energy confinement time was measured using the diamagnetic loop. Experimental results on IR-T1 show that the maximum energy confinement time (which corresponds to minimum collisions, minimum microinstabilities and minimum transport) is at low values of the effective edge safety factor (2.5 eff (a) i <0.72). The results obtained are in agreement with those obtained with the theoretical approach [1-5].

Refresher training as an important factor affecting safety of atomic energy utilization facilities

International Nuclear Information System (INIS)

Kapralov, E.

2005-01-01

Refresher training appears to be one of the most important factors, affecting safety of atomic energy utilization facilities. To provide up-to-date refresher training programs and courses TC NRS implements best training practice based on the actual and perspective Russian national and international norms, regulations, standards and recommendations. (author)

Personality factors and profiles in variants of irritable bowel syndrome

Institute of Scientific and Technical Information of China (English)

无

2007-01-01

AIM: To study the association between irritable bowel syndrome (IBS) variants (constipation, diarrhea, or both)and personality traits in non-psychiatric patients.METHODS: IBS was diagnosed using the Rome Ⅱ diagnostic criteria after exclusion of organic bowel pathology. The entry of each patient was confirmed following a psychiatric interview. Personality traits and the score of each factor were evaluated using the NEO Five Factor Inventory.RESULTS: One hundred and fifty patients were studied.The mean age (±SD) was 33.4 (±11.0) year (62% female). Subjects scored higher in neuroticism (26.25±7.80 vs 22.92±9.54, P ＜ 0.0005), openness (26.25±5.22 vs 27.94±4.87, P ＜ 0.0005) and conscientiousness (32.90 ±7.80 vs 31.62±5.64, P ＜ 0.01) compared to our general population derived from universities of Iran. Our studied population consisted of 71 patients with Diarrhea dominant-IBS, 33 with Constipation dominant-IBS and 46 with Altering type-IBS. Scores of conscientiousness and neuroticism were significantly higher in C-IBS compared to D-IBS and A-IBS (35.79±5.65 vs 31.95±6.80,P = 0.035 and 31.97±9.87, P = 0.043, respectively).Conscientiousness was the highest dimension of personality in each of the variants. Patients with C-IBS had almost similar personality profiles, composed of higher scores for neuroticism and conscientiousness, with low levels of agreeableness, openness and extraversion that were close to those of the general population.CONCLUSION: Differences were observed between IBS patients and the general population, as well as between IBS subtypes, in terms of personality factors.Patients with constipation-predominant IBS showed similar personality profiles. Patients with each subtype of IBS may benefit from psychological interventions, which can be focused considering the characteristics of each subtype.

Profile of drowning victims in a coastal community.

Science.gov (United States)

Nichter, M A; Everett, P B

1989-02-01

Accidental drowning accounts for 15% of all accidental deaths in Pinellas County, Florida, and this study was conducted to better understand the epidemiologic profile of the victim. The medical examiner's records of 230 drownings in Pinellas County from January 1, 1983, through December 31, 1987, were reviewed for demographic and epidemiologic data. Bodies of salt water were the most common drowning site (47%), followed by swimming pools (22%), lakes (11%), baths (7%), and canals (6%). The drowning incidence for males was more than three times that for females. Drowning was endemic among boys less than five years of age (30/100,000/year). Fifty-nine percent of young adult victims had detectable postmortem blood alcohol levels. Drowning rates were highest among children less than five years and adults more than 80 years. Epidemiologic profiles of populations at risk and contributing factors are described and public safety measures are suggested.

Coagulation Profile as a Risk Factor for 30-Day Morbidity and Mortality Following Posterior Lumbar Fusion.

Science.gov (United States)

Bronheim, Rachel S; Oermann, Eric K; Cho, Samuel K; Caridi, John M

2017-06-15

A retrospective cohort study. The aim of this study was to identify associations between abnormal coagulation profile and postoperative morbidity and mortality in patients undergoing posterior lumbar fusion (PLF). The literature suggests that abnormal coagulation profile is associated with postoperative complications, notably the need for blood transfusion. However, there is little research that directly addresses the influence of coagulation profile on postoperative complications following PLF. The American College of Surgeons National Surgical Quality Improvement Program database (ACS-NSQIP) was utilized to identify patients undergoing PLF between 2006 and 2013. Nine thousand two hundred ninety-five patients met inclusion criteria. Multivariate analysis was utilized to identify associations between abnormal coagulation profile and postoperative complications. Low platelet count was an independent risk factor for organ space surgical site infections (SSIs) [odds ratio (OR) = 6.0, P 48 hours (OR = 4.5, P = 0.002), Acute renal failure (OR = 5.8, P = 0.007), transfusion (OR = 1.6, P risk factor for ventilation >48 hours (OR = 5.6, P = 0.002), cerebrovascular accident (CVA)/stroke with neurological deficit (OR = 5.1, P = 0.011), cardiac arrest (OR = 5.4, P = 0.030), transfusion (OR = 1.5, P = 0.020), and death (OR = 4.5, P = 0.050). High International Normalized Ration (INR) was an independent risk factor for pneumonia (OR = 8.7, P = 0.001), pulmonary embolism (OR = 5.6, P = 0.021), deep venous thrombosis/Thrombophlebitis (OR = 4.8, P = 0.011), septic shock (OR = 8.4, P = 0.048), and death (OR = 9.8, P = 0.034). Bleeding disorder was an independent risk factor for organ space SSI (OR = 5.4, P = 0.01), pneumonia (OR = 3.0, P = 0.023), and sepsis (OR = 4.4, P profile was an independent predictor of morbidity and mortality in patients

Tolerability and safety aspects of mirtazapine.

Science.gov (United States)

Nutt, David J

2002-06-01

The tolerability and safety profile of the noradrenergic and specific serotonergic antidepressant (NaSSA) mirtazapine reflects its unique pharmacological profile. The 5-HT(2) blocking effect contributes towards its anxiolytic effects and benefits on sleep, as well as preventing the sexual dysfunction that may occur with non-specific stimulation of the serotonin system by drugs such as the selective serotonin reuptake inhibitors (SSRIs). In addition, 5-HT(3) blockade by mirtazapine helps to prevent nausea and vomiting. Weight gain is the most commonly reported side-effect of mirtazapine, although there is evidence to suggest that this is not a significant problem during long-term treatment. In conclusion, mirtazapine has a good tolerability and safety profile that demonstrates several benefits over other antidepressants. Copyright 2002 John Wiley & Sons, Ltd.

A development of an evaluation flow chart for seismic stability of rock slopes based on relations between safety factor and sliding failure

International Nuclear Information System (INIS)

Kawai, Tadashi; Ishimaru, Makoto

2010-01-01

Recently, it is necessary to assess quantitatively seismic safety of critical facilities against the earthquake- induced rock slope failure from the viewpoint of seismic PSA. Under these circumstances, it is needed to evaluate the seismic stability of surrounding slopes against extremely strong ground motions. In order to evaluate the seismic stability of surrounding slopes, the most conventional method is to compare safety factors on an expected sliding surface, which is calculated from the stability analysis based on the limit equilibrium concept, to a critical value which judges stability or instability. The method is very effective to examine whether or not the sliding surface is safe. However, it does not mean that the sliding surface falls whenever the safety factor becomes smaller than the critical value during an earthquake. Therefore the authors develop a new evaluation flow chart for the seismic stability of rock slopes based on relations between safety factor and sliding failure. Furthermore, the developed flow chart was validated by comparing two kinds of safety factors calculated from a centrifuge test result concerned with a rock slope. (author)

The effects of Ankaferd® Blood Stopper on transcription factors in HUVEC and the erythrocyte protein profile

Directory of Open Access Journals (Sweden)

Erkan Yılmaz

2011-12-01

Full Text Available Objective: Ankaferd® Blood Stopper (ABS is an herbal extract that has historically been used as a hemostatic agent in traditional Turkish medicine. ABS is comprised of a standardized herbal mixture of T. vulgaris, G. glabra, V. vinifera, A. officinarum, and U. dioica. ABS’s basic mechanism of action is the formation of an encapsulated protein web, which represents the focal point for vital erythrocyte masses. The hemostatic effects of ABS have been observed in vitro and in vivo. ABS was registered as a hemostatic agent for external hemorrhages and dental bleeding following phase I randomized, double-blind crossover placebo-controlled clinical research, and safety and efficacy reports. In terms of the potential use of ABS, transcription factors may be novel factors that play a role in the hemostatic and other pleiotropic effects of ABS. Materials and Methods: Hence, the present study aimed to investigate the effects of ABS on endothelium, and possible transcription factor changes in HUVEC (human umbilical vein endothelial cells and the erythrocyte membrane profile. ABS (5 μL and 50 μL was administered to HUVEC (in 75 cm2; ~75% fullness for 5 min and 15 min. Results: ABS caused significant increases in the level of activation of the following transcription factors; AP2, AR, CRE/ATF1, CREB, E2F1-5, E2F6, EGR, GATA, HNF-1, ISRE, Myc-Max, NF-1, NFkB, p53, PPAR, SMAD 2/3, SP1, TRE/AP1, and YY1. Following erythrocyte membrane isolation, protein complexes were undissolved, but denatured. The protein complex formed was resistant to heat and detergent. Trypsin and sonication were used in order to break this complex; the complex dissolved and erythrocyte membrane proteins were released in SDS-PAGE.Conclusion: ABS established a very fast and solid protein web, and increased the level of transcription factor activation. Therefore the cellular effects of ABS could be related to different intracellular biological pathways.

ORGANIZATIONAL CULTURE AS ONE OF THE MAIN FACTORS FOR THE SUCCESSFUL SAFETY MANAGEMENT

Directory of Open Access Journals (Sweden)

Snežana Živković

2016-05-01

Full Text Available The goal of this research is to establish the influence of organizational culture on the system of safety and health at work. The research sample included 556 respondents of various activities in Russia. Based on the results, it can be concluded that there is a statistically significant connection of the Attitude towards occupational safety with 5 out of 7 aspects of organizational culture, as well as with the general factor of Usefulness of the manner of management. In addition, there is a statistically significant connection to age, total years of service and qualifications. Through a comparative analysis of results acquired in the Republic of Serbia and Russia, differences in attitudes towards safety and health activities at work were acquired i.e. there is a difference between the average answers of respondents from Serbia and Russia in the Attitude towards occupational safety which is on average slightly more prominent in respondents from Serbia. In relation to organizational culture aspects, there are differences in Vision, Credibility, Feedback and recognition as well as Responsibility. Respondents from Serbia have higher average values on all these measures, but all the differences are small (all effect sizes are below 0.2.

Leadership and Management for Safety. General Safety Requirements (Arabic Edition)

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Leadership and Management for Safety. General Safety Requirements (Chinese Edition)

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Leadership and Management for Safety. General Safety Requirements (French Edition)

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Leadership and Management for Safety. General Safety Requirements (Spanish Edition)

International Nuclear Information System (INIS)

2017-01-01

his Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Identification and assessment of organisational factors related to the safety of NPPs - State-of-the-Art Report

International Nuclear Information System (INIS)

Baumont, Genevieve; Bourrier, Mathilde; Frischknecht, Albert; Schoenfeld, Isabelle; Weber, Mike J.

1999-01-01

The initiation of this State-of-the-Art Report (SOAR) on Organisational Factors Identification and Assessment comes from operating experience associated with a number of major events world-wide which caused power plants to be shutdown for a significant period of time. Root cause assessments of these events identified weaknesses in organisational factors as contributing to these events. There is general recognition that organisational factors need to be evaluated for their contribution to plant safety performance and risk to prevent their recurrence in events. There is a need to collect and analyse operational and event data from the nuclear environment to determine the safety and risk significance of organisational factors, to identify assessment methods for those factors, and to gain peer review of the results to ensure credibility and acceptability of these methods and possibly their measures. The SOAR presents a representative view of developments in this field and addresses the following topics: - identification of organisational factors; - identification of methods for the evaluation of organisational factors; - identification of methods for the evaluation of whole organisations; - identification of gaps in knowledge and needed research to evaluate adequately the influence of organisation and management on safety and risk. The workshop participants identified 12 organisational factors as important to assess in determining organisational safety performance. They are: external influences; goals and strategies; management functions and overview; resource allocation; human resource management; training; co-ordination of work; organisational knowledge; proceduralization; organisational culture; organisational learning; and communication. Different cultural backgrounds of participants using their own terminology sometimes made it difficult to have a common definition for certain factors. Some factors could be defined by consensus; other factors such as

Innovations in Post-Marketing Safety Research

NARCIS (Netherlands)

Stefánsdóttir, G.

2012-01-01

Safety surveillance is important during the entire life cycle of a drug. Pre-marketing trials have been shown to be ineffective in establishing the full safety profile of the drug, mainly due to their relatively small sample size and characteristics of the patients, which are usually younger and

Decommissioning: Regulatory activities and identification of key organizational and human factors safety issues

International Nuclear Information System (INIS)

Durbin, N.E.; Melber, B.D.; Lekberg, A.

2001-12-01

In the late 1990's the Swedish government decided to shut down Unit 1 of the Barsebaeck nuclear power plant. This report documents some of the efforts made by the Swedish Nuclear Power Inspectorate (SKI) to address human factors and organizational issues in nuclear safety during decommissioning of a nuclear facility. This report gives a brief review of the background to the decommissioning of Barsebaeck 1 and points out key safety issues that can arise during decommissioning. The main regulatory activities that were undertaken were requirements that the plant provide special safety reports on decommissioning focusing on first, the operation of both units until closure of Unit 1 and second, the operation of Unit 2 when Unit 1 was closed. In addition, SKI identified areas that might be affected by decommissioning and called these areas out for special attention. With regard to these areas of special attention, SKI required that the plant provide monthly reports on changing and emerging issues as well as self-assessments of the areas to be addressed in the special safety reports. Ten key safety issues were identified and evaluated with regard to different stages of decommissioning and with regard to the actions taken by Barsebaeck. Some key conclusions from SKI's experience in regulating a decommissioning nuclear power plant conclude the report

Safety culture management: The importance of organizational factors

International Nuclear Information System (INIS)

Haber, S.B.; Shurberg, D.A.; Jacobs, R.; Hofmann, D.

1995-01-01

The concept of safety culture has been used extensively to explain the underlying causes of performance based events, both positive and negative, across the nuclear industry. The work described in this paper represents several years of effort to identify, define and assess the organizational factors important to safe performance in nuclear power plants (NPPs). The research discussed in this paper is primarily conducted in support of the US Nuclear Regulatory Commission's (NRC) efforts in understanding the impact of organizational performance on safety. As a result of a series of research activities undertaken by numerous NRC contractors, a collection of organizational dimensions has been identified and defined. These dimensions represent what is believed to be a comprehensive taxonomy of organizational elements that relate to the safe operation of nuclear power plants. Techniques were also developed by which to measure these organizational dimensions, and include structured interview protocols, behavioral checklists, and behavioral anchored rating scales (BARS). Recent efforts have focused on devising a methodology for the extraction of information related to the identified organizational dimensions from existing NRC documentation. This type of effort would assess the applicability of the organizational dimensions to existing NRC inspection and evaluation reports, refine the organizational dimensions previously developed so they are more relevant to the task of retrospective analysis, and attempt to rate plants based on the review of existing NRC documentation using the techniques previously developed for the assessment of organizational dimensions

Safety and Pharmacokinetic Profiles of Repeated-Dose Micafungin in Children and Adolescents Treated for Invasive Candidiasis

Science.gov (United States)

Benjamin, Daniel K.; Deville, Jaime G.; Azie, Nkechi; Kovanda, Laura; Roy, Mike; Wu, Chunzhang; Arrieta, Antonio

2013-01-01

Background Micafungin is an echinocandin with proven efficacy against a broad range of fungal infections, including those caused by Candida species. Objective To evaluate the safety and pharmacokinetics of once-daily 3 mg/kg and 4.5 mg/kg micafungin in children with proven, probable, or suspected invasive candidiasis. Methods Micafungin safety and pharmacokinetics were assessed in two Phase I, open-label, repeat-dose trials. In Study 2101, children aged 2–16 years were grouped by weight to receive 3 mg/kg (≥25 kg) or 4.5 mg/kg (<25 kg) intravenous micafungin for 10–14 days. In Study 2102, children aged 4 months to <2 years received 4.5 mg/kg micafungin. Study protocols were otherwise identical. Results Safety was analyzed in seventy-eight and nine children in Studies 2101 and 2102, respectively. Although adverse events were experienced by most children (2101: n = 62; 2102: n = 9), micafungin-related adverse events were less common (2101: n = 28; 2102: n = 1), and the number of patients discontinuing due to adverse events was low (2101: n = 4; 2102: n = 1). The most common micafungin-related adverse events were infusion-associated symptoms, pyrexia, and hypomagnesemia (Study 2101), and liver function abnormalities (Study 2102). The micafungin pharmacokinetic profile was similar to that seen in other studies conducted in children, but different than that observed in adults. Conclusions In this small cohort of children, once-daily doses of 3 mg/kg and 4.5 mg/kg micafungin were well tolerated. Pharmacokinetic data will be combined in a population pharmacokinetic analysis to support U.S. dosing recommendations in children. PMID:23958810

Profile correction to electron temperature and enhancement factor in soft-x-ray pulse-height-analysis measurements in tokamaks

International Nuclear Information System (INIS)

Sesnic, S.; Diesso, M.; Hill, K.; Holland, A.; Pohl, F.

1988-01-01

Because soft-x-ray pulse-height-analysis spectra contain chordal information, the electron temperature and the radiation intensity (enhancement factor) measurements do not represent the local values. The correction factors for the electron temperature and the enhancement factor as a function of the temperature and density profile parameters and the energy are obtained. The spectrum distortion due to pulse pileup effects is also evaluated. A set of curves is given from which the distortion of the spectrum can be obtained if the electron temperature, the Be filter thickness, and the electronic parameters of the acquisition system are known. PG 1810,1812 ID 131801CON N X-ray diagnostics TT Profile correction to electron temperature and enhancement factor in soft-x-ray pulse-height-analysis measurements in tokamaks AU S. Sesnic, M. Diesso, K. Hill, and A. Holland LO Princeton University, Plasma Physics Laboratory, P.O. Box 451, Princeton, New Jersey 08543 AU F. Pohl LO Max-Planck Institut fuer Plasmaphysik, 8046-Garching, Federal Republic of Germany SD (Presented on 16 March 1988) AB Because soft-x-ray pulse-height-analysis spectra contain chordal information, the electron temperature and the radiation intensity (enhancement factor) measurements do not represent the local values. The correction factors for the electron temperature and the enhancement factor as a function of the temperature and density profile parameters and the energy are obtained. The spectrum distortion due to pulse pileup effects is also evaluated. A set of curves is given from which the distortion of the spectrum can be obtained if the electron tempe

Human factor as nuclear safety element

International Nuclear Information System (INIS)

Valeca, S.C.; Preda, M.; Valeca, M.; Ana, E. M.; Popescu, D.

2008-01-01

National nuclear power system is based on western technology, it covers almost 20% from national need and could be briefly described by: - Safety and economic performances of Cernavoda NPP Unit 1; - Reduced influence on environment, population and workers; - Excellent ranking (place 4) among CANDU units from all over the world. Also, the national nuclear power system plays a major role in Romanian power policy accomplishment: - Energy safety and independence assurance; - Decrease of production of greenhouse effect gases; - Preserve the stability and adequacy of energy cost. 'Nuclear Safety' concept covers all the activities resulting from nuclear fuel cycle. By taking into account the international experience, the related activities are estimated to last around 70 years in Romania: - 10 years for site description and selection, design, manufacturing and commissioning activities; - 40 years for Nuclear Power Plant operation, maintenance and modernization activities; - 20 years for preservation and decommissioning activities. The above mentioned activities requires human resources, qualified and specialized in the following areas: - research and development; - equipment design, manufacturing and operation; - components construction and assembly, operation and maintenance. (authors)

Safety-factor profile tailoring by improved electron cyclotron system for sawtooth control and reverse shear scenarios in ITER

International Nuclear Information System (INIS)

Zucca, C.; Sauter, O.; Fable, E.; Henderson, M. A.; Polevoi, A.; Farina, D.; Ramponi, G.; Saibene, G.; Zohm, H.

2008-01-01

The effect of the predicted local electron cyclotron current driven by the optimized electron cyclotron system on ITER is discussed. A design variant was recently proposed to enlarge the physics program covered by the upper and equatorial launchers. By extending the functionality range of the upper launcher, significant control capabilities of the sawtooth period can be obtained. The upper launcher improvement still allows enough margin to exceed the requirements for neoclassical tearing mode stabilization, for which it was originally designed. The analysis of the sawtooth control is carried on with the ASTRA transport code, coupled with the threshold model by Por-celli, to study the control capabilities of the improved upper launcher on the sawtooth instability. The simulations take into account the significant stabilizing effect of the fusion alpha particles. The sawtooth period can be increased by a factor of 1.5 with co-ECCD outside the q = 1 surface, and decreased by at least 30% with co-ECCD inside q = 1. The present ITER base-line design has the electron cyclotron launchers providing only co-ECCD. The variant for the equatorial launcher proposes the possibility to drive counter-ECCD with 1 of the 3 rows of mirrors: the counter-ECCD can then be balanced with co-ECCD and provide pure ECH with no net driven current. The difference between full co-ECCD off-axis using all 20MW from the equatorial launcher and 20MW co-ECCD driven by 2/3 from the equatorial launcher and 1/3 from the upper launcher is shown to be negligible. Cnt-ECCD also offers greater control of the plasma current density, therefore this analysis addresses the performance of the equatorial launcher to control the central q profile. The equatorial launcher is shown to control very efficiently the value of q 0.2 -q min in advanced scenarios, if one row provides counter-ECCD.

Investigation and identification of factors affecting migrating peasant workers' usage of safety footwear in the Chinese construction industry.

Science.gov (United States)

Suo, Qinghui; Zhang, Daming

2017-09-01

A sample of 300 migrating peasant workers from 15 Chinese building construction sites completed a demographic questionnaire to investigate the usage of safety footwear. The survey form was constructed based on the theory of planned behaviour, and a total of 12 questions focusing on the workers' past experience, attitudes, subjective norms and perceived behavioural control were included in the survey. It was found that 92% of the participants did not wear safety footwear while working on construction sites, although more than 91% of them believed that safety footwear would protect the foot from injury; none of the participants had been provided free safety footwear by their employer. Regression analysis shows that employers' attitude is the most important factor affecting their usage of safety footwear, 'providing free safety footwear' and 'comfortability of the safety footwear' ranking second and third respectively.

Real-time control of the current density and pressure profiles in Jet

International Nuclear Information System (INIS)

Mazon, D.; Moreau, D.; Litaudon, X.; Joffrin, E.; Laborde, L.; Zabeo, L.; Crisanti, F.; Riva, M.; Felton, R.; Murari, A.; Tala, T.

2003-01-01

In order to ultimately control internal transport barriers during advanced operation scenarios, new algorithms using a truncated singular value decomposition of a linearized model operator have been implemented in the JET real-time controller, with the potentiality of retaining the distributed nature of plasma parameter profiles. First experiments using the simplest, lumped-parameter, version of this technique have been dedicated to the feedback control of the current density profile in a negative shear plasma using three heating and current drive actuators, namely neutral beam injection (NBI), ion cyclotron resonant frequency heating (ICRH) and lower hybrid current drive (LHCD). Successful control of the safety factor profile has been achieved on the time scale of the current redistribution time, first during an extended preheat phase with only LHCD as actuator and, then, in quasi steady-state conditions during the main heating phase of a discharge, using the three heating and current drive actuators

Evolution of the electron temperature profile of ohmically heated plasmas in TFTR

International Nuclear Information System (INIS)

Taylor, G.; Efthimion, P.C.; Arunasalam, V.

1985-08-01

Blackbody electron cyclotron emission was used to ascertain and study the evolution and behavior of the electron temperature profile in ohmically heated plasmas in the Tokamak Fusion Test Reactor (TFTR). The emission was measured with absolutely calibrated millimeter wavelength radiometers. The temperature profile normalized to the central temperature and minor radius is observed to broaden substantially with decreasing limiter safety factor q/sub a/, and is insensitive to the plasma minor radius. Sawtooth activity was seen in the core of most TFTR discharges and appeared to be associated with a flattening of the electron temperature profile within the plasma core where q less than or equal to 1. Two types of sawtooth behavior were identified in large TFTR plasmas (minor radius, a less than or equal to 0.8 m) : a typically 35 to 40 msec period ''normal'' sawtooth, and a ''compound'' sawtooth with 70 to 80 msec period

Quality factors quantification/assurance for software related to safety in nuclear power plants

International Nuclear Information System (INIS)

Nunez McLeod, J.E.; Rivera, S.S.

1997-01-01

Quality assurance plan is needed to guarantee the software quality. The use of such a plan involves activities that should take place all along the life cycle, and which can be evaluated using the so called quality factors. This is due to the fact that the quality itself cannot be measured, but some of its manifestations can be used for this purpose. In the present work, a methodology to quantify a set of quality factors is proposed, for software based systems to be used in safety related areas in nuclear power plants. (author) [es

The influence of organisational and management factors on safety performance in NNPPS. Rand D project

International Nuclear Information System (INIS)

Cal, C. de la; Gil, B.; Sola, R.; Vaquero, C.; Garces, M. I.

2002-01-01

The direct influence of organisational and managerial factors on safety performance in nuclear power plants has been widely proved by two findings, the analysis of their operating experience and the differences in safety levels reached by similar installations. Specially, the study of majors accidents such as TMI-2 and Chernobyl have demonstrated that the technical deficiencies are not the only root causes, but there are a whole set of human, organisational, managerial and social factors which are the origin from most of these deficiencies. In recent years, this fact is emphasised with the nuclear industry involved a process of change. The deregulation of the electricity market, which has increased the economic pressures to the companies and has driven in many cases to restructures in ownership (mergers, acquisitions), downsizing processes and outsourcing parts of the work, jointly with the development of information technologies and computer networks and with a change in the regulatory and social climates are some of the nre factors affecting the performance of nuclear power plants that have addressed, even more, to the need of re-viewing and assessing the impact of organisational aspects on their safe performance. There have been international efforts to analyse the influence of organisational factors in the safety of nuclear power plants following different approaches. Research institutions, utilities and regulatory bodies. individually or in co-operation, have tried to develop practical tools for taking into account the organisation. According to these international efforts the Association of Spanish Utilities, UNESA, and the Spanish Nuclear Regulatory Body, CSN, have included in 1998, for the first time in their Co-ordinated Plan for Research, an innovative five years R and D project entitled Development of methods to evaluate and model the impact of organisation on nuclear poer plants safety whose main objectives are to analyse the impact of organisation and

Calibration of partial safety factors for wind turbine rotor blades against fatigue; Kalibrering af partielle sikkerhedsfaktorer for udmattelse af vindmoellerotorer. Bilagsrapport

Energy Technology Data Exchange (ETDEWEB)

Christensen, C.J.; Ronold, K.O.; Thoegersen, M.L.

2000-08-01

The report describes a calibration of partial safety factors for wind turbine rotor blades subjected to fatigue loading in flapwise and edgewise bending. While earlier models - developed by the authors - dealt with such calibrations for site-specific individual turbines only, the calibration model applied herein covers an integrated analysis with different turbines on different sites and with different blade materials. The result is an optimized set of partial safety factors, i.e. a set of safety factors that lead to minimum deviation from the target reliability of the achieved reliabilities over the selected scope of turbines, sites and materials. The turbines included in the study cover rated powers of 450-600 kW. (au)

The likelihood of achieving quantified road safety targets: a binary logistic regression model for possible factors.

Science.gov (United States)

Sze, N N; Wong, S C; Lee, C Y

2014-12-01

In past several decades, many countries have set quantified road safety targets to motivate transport authorities to develop systematic road safety strategies and measures and facilitate the achievement of continuous road safety improvement. Studies have been conducted to evaluate the association between the setting of quantified road safety targets and road fatality reduction, in both the short and long run, by comparing road fatalities before and after the implementation of a quantified road safety target. However, not much work has been done to evaluate whether the quantified road safety targets are actually achieved. In this study, we used a binary logistic regression model to examine the factors - including vehicle ownership, fatality rate, and national income, in addition to level of ambition and duration of target - that contribute to a target's success. We analyzed 55 quantified road safety targets set by 29 countries from 1981 to 2009, and the results indicate that targets that are in progress and with lower level of ambitions had a higher likelihood of eventually being achieved. Moreover, possible interaction effects on the association between level of ambition and the likelihood of success are also revealed. Copyright © 2014 Elsevier Ltd. All rights reserved.

Developing patient safety in dentistry.

Science.gov (United States)

Pemberton, M N

2014-10-01

Patient safety has always been important and is a source of public concern. Recent high profile scandals and subsequent reports, such as the Francis report into the failings at Mid Staffordshire, have raised those concerns even higher. Mortality and significant morbidity associated with the practice of medicine has led to many strategies to help improve patient safety, however, with its lack of associated mortality and lower associated morbidity, dentistry has been slower at systematically considering how patient safety can be improved. Recently, several organisations, researchers and clinicians have discussed the need for a patient safety culture in dentistry. Strategies are available to help improve patient safety in healthcare and deserve further consideration in dentistry.

BWR AXIAL PROFILE

International Nuclear Information System (INIS)

Huffer, J.

2004-01-01

The purpose of this calculation is to develop axial profiles for estimating the axial variation in burnup of a boiling water reactor (BWR) assembly spent nuclear fuel (SNF) given the average burnup of an assembly. A discharged fuel assembly typically exhibits higher burnup in the center and lower burnup at the ends of the assembly. Criticality safety analyses taking credit for SNF burnup must account for axially varying burnup relative to calculations based on uniformly distributed assembly average burnup due to the under-burned tips. Thus, accounting for axially varying burnup in criticality analyses is also referred to as accounting for the ''end effect'' reactivity. The magnitude of the reactivity change due to ''end effect'' is dependent on the initial assembly enrichment, the assembly average burnup, and the particular axial profile characterizing the burnup distribution. The set of bounding axial profiles should incorporate multiple BWR core designs and provide statistical confidence (95 percent confidence that 95 percent of the population is bound by the profile) that end nodes are conservatively represented. The profiles should also conserve the overall burnup of the fuel assembly. More background on BWR axial profiles is provided in Attachment I

On dependence of thermal transport on the safety factor q in tokamaks

International Nuclear Information System (INIS)

Hirose, A.; Singh, A.; Livingstone, S.; Liu, D.

2005-01-01

Mixing length estimates of the anomalous ion and electron thermal diffusivities caused by the ITG and ETG mode, respectively, have revealed that both diffusivities are proportional to the safety factor q. In the case of ITG mode, the maximum χ i occurs at long wavelengths where coupling to the ion acoustic mode is dominant while ETG driven χ e peaks at wavelengths comparable to the electron skin depth. (author)

Monitoring human and organizational factors influencing common-cause failures of safety-instrumented system during the operational phase

International Nuclear Information System (INIS)

Rahimi, Maryam; Rausand, Marvin

2013-01-01

Safety-instrumented systems (SISs) are important safety barriers in many technical systems in the process industry. Reliability requirements for SISs are specified as a safety integrity level (SIL) with reference to the standard IEC 61508. The SIS reliability is often threatened by common-cause failures (CCFs), and the beta-factor model is the most commonly used model for incorporating the effects of CCFs. In the design phase, the beta-factor, β, is determined by answering a set of questions that is given in part 6 of IEC 61508. During the operational phase, there are several factors that influence β, such that the actual β differs from what was predicted in the design phase, and therefore the required reliability may not be maintained. Among the factors influencing β in the operational phase are human and organizational factors (HOFs). A number of studies within industries that require highly reliable products have shown that HOFs have significant influence on CCFs and therefore on β in the operational phase, but this has been neglected in the process industry. HOFs are difficult to predict, and susceptible to be changed during the operational phase. Without proper management, changing HOFs may cause the SIS reliability to drift out of its required value. The aim of this article is to highlight the importance of HOFs in estimation of β for SISs, and also to propose a framework to follow the HOFs effects and to manage them such that the reliability requirement can be maintained

Research study about the establishment of safety culture. Effects of organizational factors in construction industry's safety indices

International Nuclear Information System (INIS)

Kojima, Mitsuhiro; Hirose, Humiko; Takano, Kenichi; Hasegawa, Naoko

1999-01-01

To find the relationships between safety related activities (such as safety patrol' or '4s/5s activities') and accidents rate in the workplace, questionnaires were sent to 965 construction companies and 120 answers were returned. In this questionnaire, safety activities, safety regulations and safety policies of the companies were asked and organizational climates, company policies, philosophies and the number of accidents in workplace were also asked. There seems some relationships between accidents rate and safety activities, safety regulations and safety policies in the companies, but the deviations between estimate values and observed values are so great that it seems impossible to estimate the accidents rate in the working place from the safety activities, safety regulations and safety policies of the companies. On the other hand, some characteristics of safety activities and organizational climates in the construction industry were identified using multi variants analysis. More detailed researches using sophisticated questionnaire will be conducted in the construction industry and petrochemical industry and relationships between the accidents rate and the safety activities will be compared between different industries. (author)

Case Study on Influence Factor Trend Analysis of the Accidents and Events of Nuclear Power Plants by applying Nuclear Safety Culture Framework

International Nuclear Information System (INIS)

Park, J. Y.; Park, Y. W.; Park, H.G.

2016-01-01

This study 1) established the standard based on frameworks of safety culture principles that show safety culture promotion goals, 2) analyzed the linkages with the frameworks that were established by analyzing each incident cause and weak point from selected 268 cases(rating over INES grade 1) among 4,088 cases (as of April 1, 2015). The 4,088 cases were selected as a result of database analysis from 702 accidents recorded in accident and rating evaluation reports that were published in the National Nuclear Safety Commission and overseas IRS (International Reporting System for operating Experience), and 3) finally conducted a trend analysis studies with these comprehensive results. From the investigations, followings were concluded. 1) In order to analyze the safety culture, analysis methodology is required. 2) Analytical methodology for building sustainable safety culture promoting a virtuous cycle system was developed 3) Among variety of process input data, 970 domestic and overseas incidents were selected as targets and 502 accidents were classified as safety culture related events by utilizing screen filter of IAEA GS-G-3.5 Appendix I and Framework (Nuclear Safety Culture Base Frame) developed by BEES, Inc. for safety culture analysis method. 4) As a result, complex safety culture influence factors for the one reason which was difficult to separate by conventional methods was able to be analyzed. 5) The cumulative data through the system was results of virtuous trend analysis rather than temporary results. Thus, it could be unique cultural factors of the domestic industry and could derive trend differences for domestic safety culture factors accordingly

Case Study on Influence Factor Trend Analysis of the Accidents and Events of Nuclear Power Plants by applying Nuclear Safety Culture Framework

Energy Technology Data Exchange (ETDEWEB)

Park, J. Y.; Park, Y. W.; Park, H.G. [KAIST, Daejeon (Korea, Republic of)

2016-05-15

This study 1) established the standard based on frameworks of safety culture principles that show safety culture promotion goals, 2) analyzed the linkages with the frameworks that were established by analyzing each incident cause and weak point from selected 268 cases(rating over INES grade 1) among 4,088 cases (as of April 1, 2015). The 4,088 cases were selected as a result of database analysis from 702 accidents recorded in accident and rating evaluation reports that were published in the National Nuclear Safety Commission and overseas IRS (International Reporting System for operating Experience), and 3) finally conducted a trend analysis studies with these comprehensive results. From the investigations, followings were concluded. 1) In order to analyze the safety culture, analysis methodology is required. 2) Analytical methodology for building sustainable safety culture promoting a virtuous cycle system was developed 3) Among variety of process input data, 970 domestic and overseas incidents were selected as targets and 502 accidents were classified as safety culture related events by utilizing screen filter of IAEA GS-G-3.5 Appendix I and Framework (Nuclear Safety Culture Base Frame) developed by BEES, Inc. for safety culture analysis method. 4) As a result, complex safety culture influence factors for the one reason which was difficult to separate by conventional methods was able to be analyzed. 5) The cumulative data through the system was results of virtuous trend analysis rather than temporary results. Thus, it could be unique cultural factors of the domestic industry and could derive trend differences for domestic safety culture factors accordingly.

Factors Influencing the Safety Behavior of German Equestrians: Attitudes towards Protective Equipment and Peer Behaviors

Directory of Open Access Journals (Sweden)

Christina-Maria Ikinger

2016-02-01

Full Text Available Human interactions with horses entail certain risks. Although the acceptance and use of protective gear is increasing, a high number of incidents and very low or inconsistent voluntary use of safety equipment are reported. While past studies have examined factors influencing the use of safety gear, they have explored neither their influence on the overall safety behavior, nor their relative influence in relation to each other. The aim of the present study is to fill this gap. We conducted an online survey with 2572 participants. By means of a subsequent multiple regression analysis, we explored 23 different variables in view of their influence on the protective behavior of equestrians. In total, we found 17 variables that exerted a significant influence. The results show that both having positive or negative attitudes towards safety products as well as the protective behavior of other horse owners or riding pupils from the stable have the strongest influence on the safety behavior of German equestrians. We consider such knowledge to be important for both scientists and practitioners, such as producers of protective gear or horse sport associations who might alter safety behavior in such a way that the number of horse-related injuries decreases in the long term.

Latent profiles of family background, personality and mental health factors and their association with behavioural addictions and substance use disorders in young Swiss men.

Science.gov (United States)

Marmet, Simon; Studer, Joseph; Rougemont-Bücking, Ansgar; Gmel, Gerhard

2018-05-04

Recent theories suggest that behavioural addictions and substance use disorders may be the result of the same underlying vulnerability. The present study investigates profiles of family background, personality and mental health factors and their associations with seven behavioural addictions (to the internet, gaming, smartphones, internet sex, gambling, exercise and work) and three substance use disorder scales (for alcohol, cannabis and tobacco). The sample consisted of 5287 young Swiss men (mean age = 25.42) from the Cohort Study on Substance Use Risk Factors (C-SURF). A latent profile analysis was performed on family background, personality and mental health factors. The derived profiles were compared with regards to means and prevalence rates of the behavioural addiction and substance use disorder scales. Seven latent profiles were identified, ranging from profiles with a positive family background, favourable personality patterns and low values on mental health scales to profiles with a negative family background, unfavourable personality pattern and high values on mental health scales. Addiction scale means, corresponding prevalence rates and the number of concurrent addictions were highest in profiles with high values on mental health scales and a personality pattern dominated by neuroticism. Overall, behavioural addictions and substance use disorders showed similar patterns across latent profiles. Patterns of family background, personality and mental health factors were associated with different levels of vulnerability to addictions. Behavioural addictions and substance use disorders may thus be the result of the same underlying vulnerabilities. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

Profiles of bullying victimization, discrimination, social support, and school safety: Links with Latino/a youth acculturation, gender, depressive symptoms, and cigarette use.

Science.gov (United States)

Lorenzo-Blanco, Elma I; Unger, Jennifer B; Oshri, Assaf; Baezconde-Garbanati, Lourdes; Soto, Daniel

2016-01-01

Latino/a youth are at risk for symptoms of depression and cigarette smoking but this risk varies by acculturation and gender. To understand why some youth are at greater risk than others, we identified profiles of diverse community experiences (perceived discrimination, bullying victimization, social support, perceived school safety) and examined associations between profiles of community experience and depressive symptoms, cigarette smoking, acculturation, and gender. Data came from Project Red (Reteniendo y Entendiendo Diversidad para Salud), a school-based longitudinal study of acculturation among 1,919 Latino/a adolescents (52% female; 84% 14 years old; 87% U.S. born). Latent profile analysis (LPA) revealed 4 distinct profiles of community experience that varied by gender and acculturation. Boys were overrepresented in profile groups with high perceived discrimination, some bullying, and lack of positive experiences, while girls were overrepresented in groups with high bullying victimization in the absence and presence of other community experiences. Youth low on both U.S. and Latino/a cultural orientation described high perceived discrimination and lacked positive experiences, and were predominantly male. Profiles characterized by high perceived discrimination and /or high bullying victimization in the absence of positive experiences had higher levels of depressive symptoms and higher risk of smoking, relative to the other groups. Findings suggest that acculturation comes with diverse community experiences that vary by gender and relate to smoking and depression risk. Results from this research can inform the development of tailored intervention and prevention strategies to reduce depression and/or smoking for Latino/a youth. (c) 2016 APA, all rights reserved).

The Sensitivity Analysis of Axial Pressure Tube Creep Profile for Dryout Power in PHWR

Energy Technology Data Exchange (ETDEWEB)

Ryu, Euiseung; Kim, Youngae [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

The Stern Laboratory performed the CHF tests with only one axial pressure tube creep profile per 3.3%, 5.1% peak crept channel and made CHF correlation including creep factor from the CHF test results. Wolsong nuclear power plants also have utilized the same CHF correlation derived by CNL. Pressure tube diameter creep rate is function of fast neutron, coolant temperature, and coolant pressure in a channel. It means that various axial pressure tube creep profiles exist in PHWR due to the history of operating conditions. Usually, CHF correlation is used during ROP(Regional Overpower Protection) Trip Setpoint Analysis or Safety Analysis in PHWR. The sensitivity analysis for CHF effects using various creep profiles is needed. This paper summarizes the comparison results of dryout power between CHF test creep profile and estimated creep profiles of Wolsong units. The effect of axial pressure tube creep profile for dryout power in fuel channel is evaluated by using Stern Lab. CHF test creep profile and 380 channel creep profiles of Wolsong. The dryout powers at 3.3% and 5.1% test conditions are slightly smaller when using 380 Wolsong channels creep profiles. These also show that the simulated dryout powers maintain consistency regardless of flow conditions.

A Comparative Study on Effective Factors in Patient Safety Culture from the Nursing Staff Points of View

Directory of Open Access Journals (Sweden)

Khalil Alimohammadzadeh

2017-04-01

Full Text Available Introduction: Patient safety and its requirements fulfillment are today one of the useful valuation indicators in healthcare organizations. Thus, patient safety culture and its promotion are referred to as one of the most important issues raised in the country. The present study aims to examine the effective factors (personal and organizational in patient safety culture from the point of view of nursing staff in Bahman and Parsian private hospitals. Method: The study has an analytical cross-sectional design and is an applied research. HSOPSC (with Cronbach’s alpha coefficient was 0.82 and researcher-devised questionnaires (with Cronbach’s Alpha equal to 0.912 were the only data collection tools. Statistical population includes nursing staff of Bahman and Parsian private hospitals in north-west Tehran. A sample consisting of 150 nurse shift supervisors and head nurses was selected from the population. Necessary data for completing questionnaires were collected by interview. Data were analyzed using SPSS16 software. Given the levels of measurement for the variables, valid measures of central tendency (mean, standard deviation, correlation tests, Chi-square, t- test, and ANOVA were used. Results: The findings showed us that such factors as organizational commitment, error reporting system, management support, reward system, and employee empowerment equipment distribution have important roles in patient safety. Their P-values are reported <0.001 for all of them. Patient safety was not significantly associated with age (P=0.964, educational level (P=0.154, and work experience (P=0.888 There is no low awareness about safety culture in any hospital and their mean awareness about patient safety culture was equal to 3.13 ±0.478 and 3.68 ±0.587 in Parsian and Bahman hospitals, respectively (P<0.001. Conclusion: Error reporting system and organizational commitment respectively have the most and the least effect on promoting patient safety culture

Monte Carlo study of thermal flux profiles and body correction factors for body protein measurements of obese subjects

International Nuclear Information System (INIS)

McGregor, B.J.; Allen, B.J.

1991-01-01

In previous calculations for total body nitrogen measurements of children, the anterior/posterior thermal neutron flux profile with depth was found to be fairly flat after an initial rise. However, for obese adults significant variations are found in the flux profile with the central flux value being as low as 20% of the peak value. The significance of these flux variations is examined. Correction factors are calculated for the varying attenuation of the nitrogen and hydrogen photons by a range of obese bodies. The calculations included the effect of the thermal flux profile as well as that of an outer layer of low nitrogen content adipose tissue. The bodies are assumed to have a homogeneous hydrogen content. A study of four obese body models with varying sex and fat content shows that the correction factors do not vary much between males and females. This is surprising since the female models are assumed to have a surface fat layer twice as thick as for the male models. The correction factors are found to be only slightly sensitive to the thermal flux variations with depth. 5 refs., 1 tab., 4 figs

Human factors experts beginning to focus on organizational factors in safety.

Science.gov (United States)

Westrum, R

1996-10-01

The role of organizational culture in aviation safety is explored. Information flow is used to demonstrate three ranges of climate within an organization. Organizations may be pathological in which information is hidden, bureaucratic in which information is ignored, or generative in which information is actively sought. The effects of organizational change on personnel are explored with emphasis on mergers between air carriers. The relationship between safety measures and economic pressures is discussed.

Psychosocial factors and safety behaviour as predictors of accidental work injuries in farming

DEFF Research Database (Denmark)

Glasscock, David John; Rasmussen, Kurt; Carstensen, Ole

2006-01-01

be a problem faced by farmers, there is a particular need to investigate the associations between farm accidents and work stressors and stress reactions. Using multivariate logistic regression analyses, this study aimed to uncover the best psychosocial predictors of injury, while controlling for exposure-related......, the relation with accidents occurred via an interaction with safety behaviour. The combination of high levels of stress symptoms and poor safety behaviour was associated with a particularly high accident risk.......Farming is one of the most hazardous occupations in terms of the incidence and seriousness of accidental injuries. Research with other occupational groups has drawn attention to the role of psychosocial factors and stress. Such research needs to be extended to agriculture. Since stress may...

Transcriptome Profiling of Pediatric Core Binding Factor AML.

Directory of Open Access Journals (Sweden)

Chih-Hao Hsu

Full Text Available The t(8;21 and Inv(16 translocations disrupt the normal function of core binding factors alpha (CBFA and beta (CBFB, respectively. These translocations represent two of the most common genomic abnormalities in acute myeloid leukemia (AML patients, occurring in approximately 25% pediatric and 15% of adult with this malignancy. Both translocations are associated with favorable clinical outcomes after intensive chemotherapy, and given the perceived mechanistic similarities, patients with these translocations are frequently referred to as having CBF-AML. It remains uncertain as to whether, collectively, these translocations are mechanistically the same or impact different pathways in subtle ways that have both biological and clinical significance. Therefore, we used transcriptome sequencing (RNA-seq to investigate the similarities and differences in genes and pathways between these subtypes of pediatric AMLs. Diagnostic RNA from patients with t(8;21 (N = 17, Inv(16 (N = 14, and normal karyotype (NK, N = 33 were subjected to RNA-seq. Analyses compared the transcriptomes across these three cytogenetic subtypes, using the NK cohort as the control. A total of 1291 genes in t(8;21 and 474 genes in Inv(16 were differentially expressed relative to the NK controls, with 198 genes differentially expressed in both subtypes. The majority of these genes (175/198; binomial test p-value < 10(-30 are consistent in expression changes among the two subtypes suggesting the expression profiles are more similar between the CBF cohorts than in the NK cohort. Our analysis also revealed alternative splicing events (ASEs differentially expressed across subtypes, with 337 t(8;21-specific and 407 Inv(16-specific ASEs detected, the majority of which were acetylated proteins (p = 1.5 x 10(-51 and p = 1.8 x 10(-54 for the two subsets. In addition to known fusions, we identified and verified 16 de novo fusions in 43 patients, including three fusions involving NUP98 in six

The 2002 Drigg post-closure safety case: implementation of a multiple factor safety case

International Nuclear Information System (INIS)

Lean, C.B.; Grimwood, P.D.; Watts, L.; Fowler, L.; Thomson, G.; Kelly, E.; Hodgkinson, D.

2004-01-01

British Nuclear Fuels plc (BNFL) owns and operates the Drigg disposal site, which is the UK's principal facility for the disposal of low level radioactive waste (LLW). Disposals are carried out under the terms of an authorization granted by the UK Environment Agency (the Agency). The Agency periodically reviews the authorization to take account of new information and any revisions to regulatory requirements. In September 2002 new Operational Environmental and Post-Closure Safety Cases (OESC and PCSC respectively) were submitted to the Agency to support the next authorization review. The OESC assesses radiological safety aspects up until closure of the site, including a post-operational management phase, whilst the PCSC considers the longer-term radiological safety. The Drigg disposal facility has been operational since 1959. For the first 3 decades of operations, disposals were solely by tumble tipping wastes into excavated trenches. This was phased out in favour of vault disposal and disposals to the trenches were completed in 1995. The first vault (Vault 8) commenced operations in 1988 and construction of future vaults is planned up to the estimated end of disposal operations in about 50 years time. This paper describes the main components of the 2002 Drigg PCSC and how they relate to each other. Central to the safety case is a systematic comprehensive post-closure radiological safety assessment (PCRSA). However, the importance of the more qualitative aspects of the safety case, including a demonstration of optimisation, is also highlighted. In addition, other confidence-building activities which are key to developing and presenting the safety case are discussed. (author)

Relationship between organizational justice and organizational safety climate: do fairness perceptions influence employee safety behaviour?

Science.gov (United States)

Gyekye, Seth Ayim; Haybatollahi, Mohammad

2014-01-01

This study investigated the relationships between organizational justice, organizational safety climate, job satisfaction, safety compliance and accident frequency. Ghanaian industrial workers participated in the study (N = 320). Safety climate and justice perceptions were assessed with Hayes, Parender, Smecko, et al.'s (1998) and Blader and Tyler's (2003) scales respectively. A median split was performed to dichotomize participants into 2 categories: workers with positive and workers with negative justice perceptions. Confirmatory factors analysis confirmed the 5-factor structure of the safety scale. Regression analyses and t tests indicated that workers with positive fairness perceptions had constructive perspectives regarding workplace safety, expressed greater job satisfaction, were more compliant with safety policies and registered lower accident rates. These findings provide evidence that the perceived level of fairness in an organization is closely associated with workplace safety perception and other organizational factors which are important for safety. The implications for safety research are discussed.

SURVEYS OF ORGANIZATIONAL CULTURE AND SAFETY CULTURE IN NUCLEAR POWER

International Nuclear Information System (INIS)

BROWN, B.S.

2000-01-01

The results of a survey of organizational culture at a nuclear power plant are summarized and compared with those of a similar survey which has been described in the literature on high-reliability organizations. A general-purpose cultural inventory showed a profile of organizational style similar to that reported in the literature; the factor structure for the styles was also similar to that of the plant previously described. A specialized scale designed to measure safety culture did not distinguish among groups within the organization that would be expected to differ

Time Based Workload Analysis Method for Safety-Related Operator Actions in Safety Analysis