Issues of Safety and Security: New Challenging to Malaysia Tourism Industry

OpenAIRE

Mohd Ayob Norizawati; Masron Tarmiji

2014-01-01

The safety and security issues nowadays become one of the forces causing changes in tourism industry in era of millennium. The main concern of this issues more focus on crime rates, terrorism, food safety, health issues and natural disaster. This topic gained the popularity in tourism research after 9/11 tragedy and since then the academicians and practitioners started seeking the best solution in ways to mitigate these negative impacts. For Malaysia, the image as safety and secure destinatio...

Radiation Safety in Industrial Radiography. Specific Safety Guide (Spanish Edition); Seguridad radiologica en la radiografia industrial

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-12-15

This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography.

Shelf life and safety concerns of bakery products--a review.

Science.gov (United States)

Smith, James P; Daifas, Daphne Phillips; El-Khoury, Wassim; Koukoutsis, John; El-Khoury, Anis

2004-01-01

Bakery products are an important part of a balanced diet and, today, a wide variety of such products can be found on supermarket shelves. This includes unsweetened goods (bread, rolls, buns, crumpets, muffins and bagels), sweet goods (pancakes, doughnuts, waffles and cookies) and filled goods (fruit and meat pies, sausage rolls, pastries, sandwiches, cream cakes, pizza and quiche). However, bakery products, like many processed foods, are subject to physical, chemical and microbiological spoilage. While physical and chemical spoilage limits the shelf life of low and intermediate moisture bakery products, microbiological spoilage by bacteria, yeast and molds is the concern in high moisture products i.e., products with a water activity (a(w)) > 0.85. Furthermore, several bakery products also have been implicated infoodborne illnesses involving Salmonella spp., Listeria monoctyogenes and Bacillus cereus, while Clostridium botulinum is a concern in high moisture bakery products packaged under modified atmospheres. This extensive review is divided into two parts. Part I focuses on the spoilage concerns of low, intermediate and high moisture bakery products while Part II focuses on the safety concerns of high moisture bakery products only. In both parts, traditional and novel methods of food preservation that can be used by the bakery industry to extend the shelf life and enhance the safety of products are discussed in detail.

Radiation Safety in Industrial Radiography. Specific Safety Guide (Spanish Edition)

International Nuclear Information System (INIS)

2013-01-01

This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography

Radiation Safety in Industrial Radiography. Specific Safety Guide (French Edition)

International Nuclear Information System (INIS)

2013-01-01

This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in … shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography

Radiation Safety in Industrial Radiography. Specific Safety Guide (Arabic Edition)

International Nuclear Information System (INIS)

2012-01-01

This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in shielded facilities that have effective engineering controls and outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography.

Shoe concerns and foot problems of wearers of safety footwear.

Science.gov (United States)

Marr, S J; Quine, S

1993-05-01

In Australia workers in many industries are required to wear safety footwear (footwear incorporating a steel toe cap). An investigation of the problems reported by 321 workers (70 per cent male) employed in a broad range of work activities and required to wear safety footwear was conducted in 1990 and 1991. Respondents were interviewed by a professionally trained podiatrist using a structured questionnaire followed by a foot examination. An extremely high percentage (91 per cent) of subjects reported one or more foot problems (which were verified by the podiatrist), and most considered that the safety footwear either caused the problem or adversely affected an existing foot condition. The main shoe concerns reported were excessive heat (65 per cent of all respondents), inflexible soles (52 per cent), weight (48 per cent) and pressure from steel toe cap (47 per cent). Certain gender differences were identified. General recommendations are made.

Reviewing industrial safety in nuclear power plants

International Nuclear Information System (INIS)

1990-02-01

This document contains guidance and reference materials for Operational Safety Review Team (OSART) experts, in addition to the OSART Guidelines (TECDOC-449), for use in the review of industrial safety activities at nuclear power plants. It sets out objectives for an excellent industrial safety programme, and suggests investigations which should be made in evaluating industrial safety programmes. The attributes of an excellent industrial safety programme are listed as examples for comparison. Practical hints for reviewing industrial safety are discussed, so that the necessary information can be obtained effectively through a review of documents and records, discussions with counterparts, and field observations. There are several annexes. These deal with major features of industrial safety programmes such as safety committees, reporting and investigation systems and first aid and medical facilities. They include some examples which are considered commendable. The document should be taken into account not only when reviewing management, organization and administration but also in the review of related areas, such as maintenance and operations, so that all aspects of industrial safety in an operating nuclear power plant are covered

Control of Industrial Safety Based on Dynamic Characteristics of a Safety Budget-Industrial Accident Rate Model in Republic of Korea.

Science.gov (United States)

Choi, Gi Heung; Loh, Byoung Gook

2017-06-01

Despite the recent efforts to prevent industrial accidents in the Republic of Korea, the industrial accident rate has not improved much. Industrial safety policies and safety management are also known to be inefficient. This study focused on dynamic characteristics of industrial safety systems and their effects on safety performance in the Republic of Korea. Such dynamic characteristics are particularly important for restructuring of the industrial safety system. The effects of damping and elastic characteristics of the industrial safety system model on safety performance were examined and feedback control performance was explained in view of cost and benefit. The implications on safety policies of restructuring the industrial safety system were also explored. A strong correlation between the safety budget and the industrial accident rate enabled modeling of an industrial safety system with these variables as the input and the output, respectively. A more effective and efficient industrial safety system could be realized by having weaker elastic characteristics and stronger damping characteristics in it. A substantial decrease in total social cost is expected as the industrial safety system is restructured accordingly. A simple feedback control with proportional-integral action is effective in prevention of industrial accidents. Securing a lower level of elastic industrial accident-driving energy appears to have dominant effects on the control performance compared with the damping effort to dissipate such energy. More attention needs to be directed towards physical and social feedbacks that have prolonged cumulative effects. Suggestions for further improvement of the safety system including physical and social feedbacks are also made.

Safety culture in industrial radiography facility

International Nuclear Information System (INIS)

Vincent-Furo, Evelyn

2015-02-01

This project reviewed published IAEA materials and other documents on safety culture with specific references to industrial radiography. Safety culture requires all duties important to safety to be carried out correctly, with alertness, due thought and full knowledge, sound judgment and a proper sense of accountability. The development and maintenance of safety culture in an operating organization has to cover management systems, policies, responsibilities, procedures and organizational arrangements. The essence is to control radiation hazard, optimize radiation protection to prevent or reduce exposures and mitigate the consequences of accidents and incidents. To achieve a high degree of safety culture appropriate national and international infrastructure should exist to ensure effective training of workers and management system that supports commitment to safety culture at all level of the organization; management, managers and workforce. The result of the review revealed that all accidents in industrial radiography facilities were due to poor safety culture practices including inadequate regulatory control oversight. Some recommendations are provided and if implemented could improve safety culture leading to good safety performance which will significantly reduce accidents and their consequences in industrial radiography. These examples call for a review of safety culture in Industrial radiography. (au)

The safety concept of the Federal Government concerning waste management

International Nuclear Information System (INIS)

Pfaffelhuber, J.K.

1976-01-01

The safety concept of the FRG concerning waste management is based on the ultimate aim of having in operation until 1985 nuclear power plants with a capacity of approx. 45,000 MWe, i.e. 50 nuclear power plants with an annual fuel consumption of 1,500 tons. A critical survey shows that there is still a great number of questions to be solved, concerning the fuel cycle in particular in terms of industrial standards, and that various problems ought to be the subject of R and D activities. Activities in the field of waste management so far are concerned only with project studies and details of project definition studies. On the one hand, the principles of the safety concept for waste management are to make possible and to guarantee the operation of nuclear facilities, and on the other hand, they are to subject those facilities which serve the purpose of waste disposal to similar safety regulations as the nuclear power plants are subjected to. The integrated waste disposal system of the Federal government for CWRs until the mid eighties is described. R+D activities are still necessary, in particular concerning reprocessing techniques, techniques in the reprocessing of Pu, the conditioning of highly active wastes, testing final storage techniques, and in the field of retention of gaseous radioactive nuclides (iodine, krypton, tritium) and of safeguarding waste disposal parks against terrorists and sabotage. The legal basis for the protection of the citizen is the Atomic Energy Act and its ordinances, EURATOM basic standards, and ICRP recommendations, some of which were tightened up for the FRG. Some recommendations of the Strahlenschutzkommision - radiation exposure, storage and separation of 85 Kr, 129 J, 131 J, and 133 Xe - are dealt with in detail. (HPH/LN) [de

Occupational health concerns in the welding industry.

Science.gov (United States)

Korczynski, R E

2000-12-01

The Workplace Safety and Health Branch initiated a proactive study in the welding industry in Manitoba. Eight welding companies participated in this study. Health concerns raised by welders were welders' flash, sore/red/teary eyes, headaches, nosebleeds, and a black mucous discharge from their nasal membrane. Most welders expressed concern regarding excessive smoke levels in the workplace and inadequate ventilation. Types of welding identified were MIG mild steel, MIG stainless steel, and TIG aluminum. Monitoring involved an assessment of noise levels, fume composition, and carbon monoxide and ozone concentrations. Metal analyses were according to National Institute for Occupational Safety and Health (NIOSH) Method 7300. Noise dosimeters used were the Quest model 100 and Micro 14 & 15. Carbon monoxide was monitored using the Gastech Model 4700 and ozone using the AID Portable Ozone Meter Model 560. In Manitoba, a hearing conservation program is required when the equivalent sound exposure level (normalized Lex 8-hr) exceeds 80 dBA-weighted. The American Conference of Governmental Industrial Hygienists' threshold limit value-time weighted average (ACGIH TLV-TWA) for iron is 5.0 mg/m3, manganese is 0.2 mg/m3, carbon monoxide is 25 ppm, and ozone is 0.05 ppm (heavy work), 0.08 ppm (moderate work), and 0.1 ppm (light work). Welders' personal exposures to manganese ranged from 0.01-4.93 mg/m3 (N = 42; AM = 0.5; GM = 0.2; SD +/- 0.9; GSD +/- 3.2) and to iron ranged from 0.04-16.29 mg/m3 (N = 42; AM = 3.0; GM = 1.4; SD +/- 3.5; GSD +/- 2.5). Noise exposures ranged from 79-98 dBA (N = 44; AM = 88.9; GM = 88.8; SD +/- 4.2; GSD +/- 1.0). Carbon monoxide levels were less than 5.0 ppm (at source) and ozone levels varied from 0.4-0.6 ppm (at source). Ventilation upgrades in the workplace were required in most welding shops. Only 7 percent of the welders wore respiratory protection. A hearing conservation program and hearing protection were required at all monitored workplaces.

Posiva's application for a decision in principle concerning a disposal facility for spent nuclear fuel. STUK's statement and preliminary safety appraisal

International Nuclear Information System (INIS)

Ruokola, E.

2000-03-01

In May 1999, Posiva Ltd submitted to the Government an application, pursuant to the Nuclear Energy Act, for a Decision in Principle on a disposal facility for spent nuclear fuel from the Finnish nuclear power plants. The Ministry of Trade and Industry requested the Radiation and Nuclear Safety Authority (STUK) to draw up a preliminary safety appraisal concerning the proposed disposal facility. In the beginning of this report, STUK's statement to the Ministry and Industry concerning the proposed disposal facility is given. In that statement, STUK concludes that the Decision in Principle is currently justified from the standpoint of safety. The statement is followed by a safety appraisal, where STUK deems, how the proposed disposal concept, site and facility comply with the safety requirements included in the Government's Decision (478/1999). STUK's preliminary safety appraisal was supported by contributions from a number of outside experts. A collective opinion by an international group of ten distinguished experts is appended to this report. (orig.)

Leadership for safety: industrial experience.

Science.gov (United States)

Flin, R; Yule, S

2004-12-01

The importance of leadership for effective safety management has been the focus of research attention in industry for a number of years, especially in energy and manufacturing sectors. In contrast, very little research into leadership and safety has been carried out in medical settings. A selective review of the industrial safety literature for leadership research with possible application in health care was undertaken. Emerging findings show the importance of participative, transformational styles for safety performance at all levels of management. Transactional styles with attention to monitoring and reinforcement of workers' safety behaviours have been shown to be effective at the supervisory level. Middle managers need to be involved in safety and foster open communication, while ensuring compliance with safety systems. They should allow supervisors a degree of autonomy for safety initiatives. Senior managers have a prime influence on the organisation's safety culture. They need to continuously demonstrate a visible commitment to safety, best indicated by the time they devote to safety matters.

Industrial safety: its structuring and content

International Nuclear Information System (INIS)

Munoz, A.; Rodriguez, J.; Martinez-Val, J.M.

1999-01-01

Industrial development has led to an on-going increase in productivity, but the concept of safety has also become highly relevant. In this article, the authors address the structuring and content of industrial safety which involves laying down essential safety requirements, both in manufacturing and processes and in products. (Author)

Safety concerns in composite manufacturing and machining

Science.gov (United States)

Asmatulu, Eylem; Alonayni, Abdullah; Alamir, Mohammed

2018-03-01

Because of the superior properties, composites have been used in many industrial applications, including aerospace, wind turbines, ships, cars, fishing rods, storage tanks, swimming pool panels, and baseball bats. Each application may require different combinations of reinforcements and matrices, which make the manufacturing safety even more challenging while working on these substances. In this study, safety issues in composite manufacturing and machining were investigated in detail, and latest developments were provided for workers. The materials most frequently used in composite manufacturing, such as matrix (polyester, vinylester, phenolic, epoxies, methyl ethyl ketone peroxide, benzoil peroxide, hardeners, and solvents), and reinforcement materials (carbon, glass and Kevlar fibers, honeycomb and foams) can be highly toxic to human body. These materials can also be very toxic to the environment when dumped out uncontrollably, creating major future health and environmental concerns. Throughout the manufacturing process, workers inhale vapors of the liquid matrix, hardeners and solvents / thinners, as well as reinforcement materials (chopped fibers and particles) in airborne. Milling, cutting and machining of the composites can further increase the toxic inhalations of airborne composite particles, resulting in major rashes, irritation, skin disorders, coughing, severe eye and lung injury and other serious illnesses. The major portions of these hazardous materials can be controlled using appropriate personal protective equipment for the chemicals and materials used in composite manufacturing and machining. This study provides best possible safety practices utilized in composite manufacturing facilities for workers, engineers and other participants.

Using agro-industrial wastes for the cultivation of microalgae and duckweeds: Contamination risks and biomass safety concerns.

Science.gov (United States)

Markou, Giorgos; Wang, Liang; Ye, Jianfeng; Unc, Adrian

2018-04-17

Aquatic organisms, such as microalgae (Chlorella, Arthrospira (Spirulina), Tetrasselmis, Dunalliela etc.) and duckweed (Lemna spp., Wolffia spp. etc.) are a potential source for the production of protein-rich biomass and for numerous other high-value compounds (fatty acids, pigments, vitamins etc.). Their cultivation using agro-industrial wastes and wastewater (WaW) is of particular interest in the context of a circular economy, not only for recycling valuable nutrients but also for reducing the requirements for fresh water for the production of biomass. Recovery and recycling of nutrients is an unavoidable long-term approach for securing future food and feed production. Agro-industrial WaW are rich in nutrients and have been widely considered as a potential nutrient source for the cultivation of microalgae/duckweed. However, they commonly contain various hazardous contaminants, which could potentially taint the produced biomass, raising various concerns about the safety of their consumption. Herein, an overview of the most important contaminants, including heavy metals and metalloids, pathogens (bacteria, viruses, parasites etc.), and xenobiotics (hormones, antibiotics, parasiticides etc.) is given. It is concluded that pretreatment and processing of WaW is a requisite step for the removal of several contaminants. Among the various technologies, anaerobic digestion (AD) is widely used in practice and offers a technologically mature approach for WaW treatment. During AD, various organic and biological contaminants are significantly removed. Further removal of contaminants could be achieved by post-treatment and processing of digestates (solid/liquid separation, dilution etc.) to further decrease the concentration of contaminants. Moreover, during cultivation an additional removal may occur through various mechanisms, such as precipitation, degradation, and biotransformation. Since many jurisdictions regulate the presence of various contaminants in feed or food

A pattern of contractor selection for oil and gas industries in a safety approach using ANP-DEMATEL in a Grey environment.

Science.gov (United States)

Gharedaghi, Gholamreza; Omidvari, Manouchehr

2018-01-11

Contractor selection is one of the major concerns of industry managers such as those in the oil industry. The objective of this study was to determine a contractor selection pattern for oil and gas industries in a safety approach. Assessment of contractors based on specific criteria and ultimately selecting an eligible contractor preserves the organizational resources. Due to the safety risks involved in the oil industry, one of the major criteria of contractor selection considered by managers today is safety. The results indicated that the most important safety criterion of contractor selection was safety records and safety investments. This represented the industry's risks and the impact of safety training and investment on the performance of other sectors and the overall organization. The output of this model could be useful in the safety risk assessment process in the oil industry and other industries.

An analysis of electronic health record-related patient safety concerns

Science.gov (United States)

Meeks, Derek W; Smith, Michael W; Taylor, Lesley; Sittig, Dean F; Scott, Jean M; Singh, Hardeep

2014-01-01

Objective A recent Institute of Medicine report called for attention to safety issues related to electronic health records (EHRs). We analyzed EHR-related safety concerns reported within a large, integrated healthcare system. Methods The Informatics Patient Safety Office of the Veterans Health Administration (VA) maintains a non-punitive, voluntary reporting system to collect and investigate EHR-related safety concerns (ie, adverse events, potential events, and near misses). We analyzed completed investigations using an eight-dimension sociotechnical conceptual model that accounted for both technical and non-technical dimensions of safety. Using the framework analysis approach to qualitative data, we identified emergent and recurring safety concerns common to multiple reports. Results We extracted 100 consecutive, unique, closed investigations between August 2009 and May 2013 from 344 reported incidents. Seventy-four involved unsafe technology and 25 involved unsafe use of technology. A majority (70%) involved two or more model dimensions. Most often, non-technical dimensions such as workflow, policies, and personnel interacted in a complex fashion with technical dimensions such as software/hardware, content, and user interface to produce safety concerns. Most (94%) safety concerns related to either unmet data-display needs in the EHR (ie, displayed information available to the end user failed to reduce uncertainty or led to increased potential for patient harm), software upgrades or modifications, data transmission between components of the EHR, or ‘hidden dependencies’ within the EHR. Discussion EHR-related safety concerns involving both unsafe technology and unsafe use of technology persist long after ‘go-live’ and despite the sophisticated EHR infrastructure represented in our data source. Currently, few healthcare institutions have reporting and analysis capabilities similar to the VA. Conclusions Because EHR-related safety concerns have complex

Probabilistic safety assessment in the chemical and nuclear industries

CERN Document Server

Fullwood, Ralph R

2000-01-01

Probabilistic Safety Analysis (PSA) determines the probability and consequences of accidents, hence, the risk. This subject concerns policy makers, regulators, designers, educators and engineers working to achieve maximum safety with operational efficiency. Risk is analyzed using methods for achieving reliability in the space program. The first major application was to the nuclear power industry, followed by applications to the chemical industry. It has also been applied to space, aviation, defense, ground, and water transportation. This book is unique in its treatment of chemical and nuclear risk. Problems are included at the end of many chapters, and answers are in the back of the book. Computer files are provided (via the internet), containing reliability data, a calculator that determines failure rate and uncertainty based on field experience, pipe break calculator, event tree calculator, FTAP and associated programs for fault tree analysis, and a units conversion code. It contains 540 references and many...

Industrial hazard and safety handbook

CERN Document Server

King, Ralph W

1979-01-01

Industrial Hazard and Safety Handbook (Revised Impression) describes and exposes the main hazards found in industry, with emphasis on how these hazards arise, are ignored, are identified, are eliminated, or are controlled. These hazard conditions can be due to human stresses (for example, insomnia), unsatisfactory working environments, as well as secret industrial processes. The book reviews the cost of accidents, human factors, inspections, insurance, legal aspects, planning for major emergencies, organization, and safety measures. The text discusses regulations, codes of practice, site layou

Industrial safety, origins and current situation

International Nuclear Information System (INIS)

Gil Sarralbo, J. F.

2011-01-01

Basic Introduction to Industrial Safety, purpose and expected outcome. Concepts and fundamental principles that support it. Brief overview of its evolution over the course of history. The current legal basis in Spain for Industrial Safety. (Author) 4 refs.

Chinese consumers concerns about food safety: Case of Tianjin

NARCIS (Netherlands)

Zhang XiaoYong, Xiaoyong

2005-01-01

The objective of this study is to gain an insight to Chinese consumers' knowledge and concerns over food safety from a case study in Tianjin city. The results indicate that Chinese consumers are very much concerned about food safety, particularly with regard to vegetables and dairy products. Chinese

Learning from safety in other industries

NARCIS (Netherlands)

Terwel, K.C.; Zwaard, W

2012-01-01

The Dutch building industry has been shocked by some major structural accidents during the last 10 years with buildings during construction as well as with delivered buildings. Several initiatives were started to improve the safety. In other industries the safety awareness seemed to be more

Safety studies concerning nuclear power reactors

International Nuclear Information System (INIS)

Bailly, Jean; Pelce, Jacques

1980-01-01

The safety of nuclear installations poses different technical problems, whether concerning pressurized water reactors or fast reactors. But investigating methods are closely related and concern, on the one hand, the behavior of shields placed between fuel and outside and, on the other, analysis of accidents. The article is therefore in two parts based on the same plan. Concerning light water reactors, the programme of studies undertaken in France accounts for the research carried out in countries where collaboration agreements exist. Concerning fast reactors, France has the initiative of their studies owing to her technical advance, which explains the great importance of the programmes under way [fr

Safety indicators for the peat industry

Energy Technology Data Exchange (ETDEWEB)

Berezhnoy, S A; Sedov, Yu I; Yenoshevskiy, B A

1981-01-01

Members of the inter-institutional department of 'Labor Protection' of the KPI, in cooperation with members of the peat industry, have developed safety indicators for the peat industry in accordance with the requirements of GOST 12.4.026-76 SSBT, and established the range and order for their use. The safety indicators for the peat industry are divided into four groups (prohibiting, warning, regulating, and indicating), depending on the function.

School Safety Concerns All Students.

Science.gov (United States)

Henderson, Megan

1999-01-01

Suggests that school safety is an issue that concerns all students. Discusses how the staff of the Rockwood South (Missouri) "RAMpage" covered the shootings at Columbine High School in a 14-page issue and in follow-up issues. Suggests that the student newspaper covered the controversial topic in an appropriate, tasteful manner. (RS)

Implementation of the safety assessment in the practice of industrial radiography

International Nuclear Information System (INIS)

Alfonso Pallarés, C.; Pérez Reyes, Y.

2015-01-01

The CNSN as regulatory authority has regulatory control processes based on regulations, permits, inspections and limitation to ensure the supervision and control of the practice of industrial radiography. On the other hand in the light of the new regulations approved and being implemented such as: Resolution 334/2011 CITMA 'Regulation on Notification and authorization of practices and activities associated with the use of ionizing radiation sources' and Resolution 17 / 2012, Security Guide: Security Assessment Practices and Activities associated with the use of ionizing radiation (recommendatory), it is necessary for compliance with regulatory requirements concerning the safety assessment. Since 2009 it has been applied this experience in different medical practices and industry, providing a systematic and consistent basis, to the safety assessment of all facilities and activities, which has helped increase the confidence that has been achieved an adequate level of security. The work was able to identify that there is a group of barriers operating in the risk reduction in various accident sequences and therefore have a relative importance in risk reduction, recommendations in this regard to improve the program management of safety in the practice of industrial radiography. [es

Safety considerations concerning light water reactors in Sweden

International Nuclear Information System (INIS)

Nilsson, T.

1977-01-01

In 1975 the Swedish Nuclear Power Inspectorate was commissioned by the Government to perform a Reactor Safety Study concerning commercial light water reactors. The study will contain an account of: - rules and regulations for reactor designs; - operation experience of the Swedish nuclear power plants with international comparisons; - the development of reactor designs during the last 10 years; - demands and conditions for inspection and inspection methods; - nuclear power plant operation organization; - training of operators; and - the results of research into nuclear safety. The study is scheduled for completion by July 1st, 1977, however, this paper gives a summary of the results of the Reactor Safety Study already available. The paper contains detailed statistics concerning safety related occurrences and reactor scrams in Sweden from July 1st, 1974 until the beginning of 1977

Advances in industrial ergonomics and safety I

Energy Technology Data Exchange (ETDEWEB)

Mital, A. (ed.) (University of Cincinnati, Cincinnati, OH (USA). Dept. of Mechanical and Industrial Engineering, Ergonomics Research Lab.)

1989-01-01

125 papers are presented under the session headings: industrial ergonomics - programs and applications; applied work physiology; occupational biomechanics; engineering anthropometry; work and protective clothing; hand tools; human-computer interface; theory and practice of industrial safety; human perception and performance; human strengths; industrial noise and vibration; machine guarding and industrial machine safety; manual materials handling; modelling for safety and health; occupational injuries and health problems; policies and standards; quality control and inspection; rehabilitation and designing for the disabled; work duration and fatigue; and work and work place design. Includes papers on static and dynamic back strength of underground coal miners, and slip and fall accidents during equipment maintenance in the surface mining industry.

Do Online Bicycle Routing Portals Adequately Address Prevalent Safety Concerns?

Directory of Open Access Journals (Sweden)

Martin Loidl

2018-03-01

Full Text Available Safety concerns are among the most prevalent deterrents for bicycling. The provision of adequate bicycling infrastructure is considered as one of the most efficient means to increase cycling safety. However, limited public funding does not always allow agencies to implement cycling infrastructure improvements at the desirable level. Thus, bicycle trip planners can at least partly alleviate the lack of adequate infrastructure by recommending optimal routes in terms of safety. The presented study provides a systematic review of 35 bicycle routing applications and analyses to which degree they promote safe bicycling. The results show that most trip planners lack corresponding routing options and therefore do not sufficiently address safety concerns of bicyclists. Based on these findings, we developed recommendations on how to better address bicycling safety in routing portals. We suggest employing current communication technology and analysis to consider safety concerns more explicitly.

Work health and safety in cotton ginning industry: a survey of practices in australia

International Nuclear Information System (INIS)

Soomro, N.

2015-01-01

This survey focuses on the WH and S (Work Health and Safety) practices in Australia and relates them with those in Pakistan. It also highlights the planned areas of work required on WH and S in cotton ginning industry of Pakistan. This article is one a series of research studies that will inform a broader approach development. The aim of the survey was to design a standardized health and safety Act for cotton ginning industry of Pakistan and to help ginners meet their due industry obligations under the model WH and S Act. The first component of the research study survey was to review the relevant Australian work and safety model as this provides a framework to protect the health, safety and welfare of all employees at work and of other people who might be affected by the job. The second aspect of the research study survey concerned site visits to cotton gins with the support of Australian Centre for Agricultural Health and Safety, Moree, NSW. During these visits the existing ginning process in terms of WH and S were reviewed. Informal interviews were also conducted with Gin Managers and Ginning Experts regarding WH and S in the Australian cotton ginning industry. (author)

Aviation safety : FAA and DOD response to similar safety concerns

Science.gov (United States)

2002-01-01

Report to the Honorable Norman Y. Mineta, Secretary of Transportation, and the Honorable Donald H. Rumsfeld, Secretary of Defense. : Safety of aircraft is a paramount concern in both civilian and military aviation. The Federal Aviation Administration...

IRSN research programs concerning reactor safety

International Nuclear Information System (INIS)

Bardelay, J.

2005-01-01

This paper is made up of 3 parts. The first part briefly presents the missions of IRSN (French research institute on nuclear safety), the second part reviews the research works currently led by IRSN in the following fields : -) the assessment of safety computer codes, -) thermohydraulics, -) reactor ageing, -) reactivity accidents, -) loss of coolant, -) reactor pool dewatering, -) core meltdown, -) vapor explosion, and -) fission product release. In the third part, IRSN is shown to give a major importance to experimental programs led on research or test reactors for collecting valid data because of the complexity of the physical processes that are involved. IRSN plans to develop a research program concerning the safety of high or very high temperature reactors. (A.C.)

The development of safety criteria for use in the nuclear industry

International Nuclear Information System (INIS)

Higson, D.J.

1978-01-01

Limits to routine radiation exposure have been laid down in the health regulations of industrial nations and provide a basis for the safe operation of nuclear power stations, uranium mines and other nuclear installations. However, these limits do not take account of the possibility of accidents, which may also be a major concern in the sitting and design of plants. In this paper specific limits to fatal accident frequencies are recommended. An indication of the required level of safety has been derived from the records of other industries and human activities which are already regarded as safe

Evaluation of food safety management systems in Serbian dairy industry

Directory of Open Access Journals (Sweden)

Igor Tomašević

2016-01-01

Full Text Available This paper reports incentives, costs, difficulties and benefits of food safety management systems implementation in the Serbian dairy industry. The survey involved 27 food business operators with the national milk and dairy market share of 65 %. Almost two thirds of the assessed dairy producers (70.4 % claimed that they had a fully operational and certified HACCP system in place, while 29.6 % implemented HACCP, but had no third party certification. ISO 22000 was implemented and certified in 29.6 % of the companies, while only 11.1 % had implemented and certified IFS standard. The most important incentive for implementing food safety management systems for Serbian dairy producers was to increase and improve safety and quality of dairy products. The cost of product investigation/analysis and hiring external consultants were related to the initial set-up of food safety management system with the greatest importance. Serbian dairy industry was not greatly concerned by the financial side of implementing food safety management systems due to the fact that majority of prerequisite programmes were in place and regularly used by almost 100 % of the producers surveyed. The presence of competency gap between the generic knowledge for manufacturing food products and the knowledge necessary to develop and implement food safety management systems was confirmed, despite the fact that 58.8 % of Serbian dairy managers had university level of education. Our study brings about the innovation emphasizing the attitudes and the motivation of the food production staff as the most important barrier for the development and implementation of HACCP. The most important identified benefit was increased safety of dairy products with the mean rank scores of 6.85. The increased customer confidence and working discipline of staff employed in food processing were also found as important benefits of implementing/operating HACCP. The study shows that the level of HACCP

Safe or sorry: Feds criminalize safety breaches, while industry record improves with time

Energy Technology Data Exchange (ETDEWEB)

Collison, M.

2004-05-01

An overview of safety conditions in Canada's oilpatch is provided, inclusive of a review of historical developments of safety practices by the industry itself, and evolving safety legislation by the provincial and federal governments. The general picture that emerges is that while great strides have been made in legislation, training and safety practices, incidents still occur; employees are still injured and sometimes die. In 2003, for example, there were almost 156,000 work-related injuries reported; of these more than 39,000 were serious enough for the worker to miss work beyond the day of the accident. Nearly 52,000 of the injured workers were inexperienced. There were 127 workplace fatalities; of these eight workers were under the age of 25. Vehicle collisions were the source of the greatest number of accidents; 25 per cent of all work-related deaths were due to traffic trauma. The oil and gas industry spawns an incredible range of hazards; everything from bear maulings and badger holes to sour gas leaks, people falling or equipment falling on them, or workers getting caught in moving equipment parts. The federal and provincial governments are major actors in the field of occupational safety, while the industry provides industry-recommended practices through the Petroleum Safety Council. The Council has also developed a basic safety awareness training package to provide smaller companies with effective training tools, and special programs targeted to the needs of new workers and international employees, in an effort to bridge differences in cultural attitudes towards the work environment. English language competence of newcomers to Canada is an area of special concern to the industry, along with a wide variety of safety training programs run by the Petroleum Industry Training Service. The Work Safe Alberta Information Sharing Network (www.worksafely.org) is another useful tool in gaining access to safety consultants, safety e-tools, and safety related

Issues of Safety and Security: New Challenging to Malaysia Tourism Industry

Directory of Open Access Journals (Sweden)

Mohd Ayob Norizawati

2014-01-01

Full Text Available The safety and security issues nowadays become one of the forces causing changes in tourism industry in era of millennium. The main concern of this issues more focus on crime rates, terrorism, food safety, health issues and natural disaster. This topic gained the popularity in tourism research after 9/11 tragedy and since then the academicians and practitioners started seeking the best solution in ways to mitigate these negative impacts. For Malaysia, the image as safety and secure destination was tarnished a few years lately and new unfortunates incident in this year bring more damage to Malaysia image. Healthy issues, terrorism, Lahad Datu intrusion, repeated kidnapping and shooting in Sabah, twin airlines incident, riot and illegal demonstration and false reporting by international media brings new challenging to Malaysia. Although some incident may be had short-term impact to Malaysia tourism industry, but it’s still gave the big impact to Malaysia branding process. Many travellers and Malaysian itself still believe that Malaysia is a one of safer destination and country to visit and stayed in, but more outstanding efforts was require to make sure Malaysia tourism industry was capable to recover from this negative impact as soon as possible.

Health and safety record of the nuclear industry

International Nuclear Information System (INIS)

Carter, M.W.; Carruthers, E.; Button, J.C.E.

1975-09-01

This paper examines the claim of the nuclear industry to have an excellent safety record, in terms of health and accident records of workers in the industry. It does not consider accidents which have not resulted in harm to the workers' health. The nuclear industry is considered to include all work with ionising radiations and radioactive materials, in education, research, medicine and industry. Since 'safety' is not an absolute concept, comparisons are made with the published records of other industries, and a study is made of the performance of the nuclear industry in relation to its own safety criteria. Data are presented on the radiation exposure of nuclear workers in Europe, America, India and Australia, in relation to the internationally recommended limits, and there is some discussion of the risks involved in these limits. The death rate in parts of the nuclear industry in America, the United Kingdom, and Australia is presented and compared with the death rate for other industries in those countries, and a listing is made of deaths caused by radiation in the period 1945 to 1968. Injury rates for the US and Australian nuclear industries are also compared with the injury rates for other industries in these countries. Consideration is given to the safety record of individual components of the nuclear industry (using the wide definition of this industry given above), special attention being given to health records of uranium miners, plutonium workers and radiologists. Although there are difficulties in obtaining sufficiently detailed information of this kind it is considered that the data presented, relative to any reasonable standard, demonstrate that the nuclear industry has a safety record to be proud of. (author)

Safety management in the industry

International Nuclear Information System (INIS)

Jaecklin, A.

1996-01-01

The safety management in the industry is characterised by the large number of processes and the materials used in them. Correspondingly large are the legal regulations. Through the thickets of today's controls, the industry moves inside a relatively tight network of technical regulations. The experience of environmental audits and industrial damage, however, shows that the greatest deficit lies in the organisational methods and less on the technical side. For the overcoming of risks one needs to recognise the weaknesses of a careful analysis. To this belongs the estimation of how far a possible scenario can be taken. The estimation of the possibilities of occurrence, however, comes up against particular problems in the industry, as the human factor in relationship with danger potentialities is very difficult to evaluate. Actual basic data or statistics are missing. This lack can only be made good with the building up of a safety management. The fundamental principles of such a management can be taken from the environmental management and especially from the standard for environmental management ISO 14001. Here it is important that safety management is integrated into the process-oriented business processes and thus becomes a part of the company culture. (author) 11 figs., tabs., 11 refs

Development of safety analysis technology for integral reactor; evaluation on safety concerns of integral reactor

Energy Technology Data Exchange (ETDEWEB)

Kim, Hee Chul; Kim, Woong Sik; Lee, J. H. [Korea Institute of Nuclear Safety, Taejeon (Korea)

2002-03-01

The Nuclear Desalination Plant (NDP) is being developed to produce electricity and fresh water, and is expected to locate near population zone. In the aspect of safety, it is required to protect the public and environment from the possible releases of fission products and to prevent the fresh water from the contamination of radioactivity. Thus, in this study, the safety characteristics of the integral reactor adopting passive and inherent safety features significantly different from existing nuclear power plants were investigated. Also, safety requirements applicable to the NDP were analyzed based on the regulatory requirements for current light water reactor and advanced reactor designs, and user requirements for small-medium size reactors. Based on these analyses, some safety concerns to be considered in the design stage have been identified and discussed. They include the use of proven technology for new safety features, systematic event classification and selection, strengthening containment function, and the safety impacts on desalination-related systems. The study presents the general safety requirements applicable to licensing of an integral reactor and suggests additional regulatory requirements, which need to be developed, based on the direction to resolution of the safety concerns. The efforts to identify and technically resolve the safety concerns in the design stage will provide the early confidence of SMART safety and the technical basis to evaluate the safety to designers and reviewers in the future. Suggestion on the development of additional regulatory requirements will contribute for the regulator to taking actions for licensing of an integral reactor. 66 refs., 5 figs., 24 tabs. (Author)

Environmental concerns gaining importance in industry operations

International Nuclear Information System (INIS)

Anon.

1992-01-01

This paper reports that environmental concerns have leapt to the forefront of industry's concerns in operating in Latin America. The United Nations Conference on Environment and Development in Rio de Janeiro June 3-14 focused a strong world spotlight on the region's environmental and commercial resources. Protection of the region's rain forests, which accounts for a huge share of the world's total, is emerging as an especially contentious issue. Ecuador's Oriente region may well prove the litmus test of how or whether oil and gas companies are able to operate in Latin American rain forests. Controversy over industry operations in the Oriente have heated to the point that environmentalist and native groups have routinely picketed company offices in Quito and used mass fundraiser mailings in North America

Nuclear Safety R and D Programs and trend in the U. S. Utility Industry

International Nuclear Information System (INIS)

Kim, Jong Hyun

1992-01-01

First of all, the deterministic approach to safety analysis, which had dominated safety research in the earlier years, has given much ground to probabilistic approach. Secondly, human factors analysis has become an important part of safety research. Third, safety research relevant to reliability, or safety combined with reliability, are gradually taking place of purely safety-oriented or stand-alone safety research. More and more nuclear utilities in the U. S. are integrating safety with reliability. This evolution is in part due to the successful completion of major safety testing and analyses of deterministic nature, and partially due to the utility industry's desire to harvest synergistic nature, and partially due to the utility industry's desire to harvest synergistic results by combining safety with reliability, as the utility industry is more and more concerned about reducing operation and maintenance costs by enhancing reliability while maintaining plant safety. Nuclear safety is a complex and comprehensive concept, defying a simple categorization or interpretation. Thus, research and development in nuclear safety is necessarily diverse, and the program areas and trend presented in this paper are not meant to be all inclusive. For instance, there are some other active areas that were not mentioned, such as seismic risk assessment program and others. Nuclear safety research and development activities have undergone a perceptible shift of emphasis in recent years. They have become more focused and product-oriented. Also, except for the severe accident analysis, the emphasis on prevention and mitigation of accident, rather than analyzing the consequences of accident, is very much in evidence; that is, reliability-based technologies using PIRA methodology, and upgrading of instrumentation and control technologies are in the main stream of activities

Mothers' Concerns for Personal Safety and Privacy While Breastfeeding: An Unexplored Phenomenon.

Science.gov (United States)

Rosen-Carole, Casey; Allen, Katherine; Fagnano, Maria; Dozier, Ann; Halterman, Jill

2018-04-01

Preliminary qualitative research in upstate NY shows new mothers are worried about safety while breastfeeding. Little is known regarding prevalence of these concerns and their effect on breastfeeding outcomes. (1) Determine frequency of breastfeeding safety and privacy concerns; (2) Explore their association with breastfeeding outcomes. Mothers were surveyed immediately and 1-month postpartum about breastfeeding goals; both surveys addressed privacy and safety concerns at home, work, and in public. Outcome data included breastfeeding intent, exclusivity, and duration. Breastfeeding/non-breastfeeding mothers were compared using Chi-square and multivariate analyses. A total of 279 women enrolled. Of these 82.8% initiated breastfeeding; at 1-month 72% provided any breast milk, and 44% were exclusively breastfeeding. About 99% felt safe breastfeeding at home; 25% reported privacy concerns; and 5% felt "vulnerable or unsafe" while breastfeeding. At 1-month, 49% agreed there was a safe place to breastfeed/express milk at work (20% unsure). Non-breastfeeding mothers expressed more safety concerns outside home/at work: 18% breastfeeding versus 28% non-breastfeeding outside home; 27% breastfeeding versus 40% non-breastfeeding at work. Nearly 54% who reported feeling vulnerable/unsafe with breastfeeding initiated breastfeeding, compared with 86% not reporting this concern (p = 0.008). Fewer women initiating breastfeeding reported vulnerability/safety (3% breastfeeding versus 14% non-breastfeeding, p = 0.008) or privacy (22% breastfeeding versus 40% non-breastfeeding, p = 0.19) concerns. Associations held after controlling for age, race, parity, insurance, geography, and marital-status. Significant associations between initiation, privacy, and safety concerns did not extend to duration or exclusivity. Many breastfeeding women reported safety and privacy concerns, especially outside the home and at work, which may influence breastfeeding initiation. Further study

Posiva's application for a decision in principle concerning a disposal facility for spent nuclear fuel. STUK's statement and preliminary safety appraisal

Energy Technology Data Exchange (ETDEWEB)

Ruokola, E. [ed.

2000-03-01

In May 1999, Posiva Ltd submitted to the Government an application, pursuant to the Nuclear Energy Act, for a Decision in Principle on a disposal facility for spent nuclear fuel from the Finnish nuclear power plants. The Ministry of Trade and Industry requested the Radiation and Nuclear Safety Authority (STUK) to draw up a preliminary safety appraisal concerning the proposed disposal facility. In the beginning of this report, STUK's statement to the Ministry and Industry concerning the proposed disposal facility is given. In that statement, STUK concludes that the Decision in Principle is currently justified from the standpoint of safety. The statement is followed by a safety appraisal, where STUK deems, how the proposed disposal concept, site and facility comply with the safety requirements included in the Government's Decision (478/1999). STUK's preliminary safety appraisal was supported by contributions from a number of outside experts. A collective opinion by an international group of ten distinguished experts is appended to this report. (orig.)

Pre-Exposure Prophylaxis for HIV Prevention: Safety Concerns.

Science.gov (United States)

Tetteh, Raymond A; Yankey, Barbara A; Nartey, Edmund T; Lartey, Margaret; Leufkens, Hubert G M; Dodoo, Alexander N O

2017-04-01

Available evidence supports the efficacy of pre-exposure prophylaxis (PrEP) in decreasing the incidence of human immunodeficiency virus (HIV) infection among high-risk individuals, especially when used in combination with other behavioural preventive methods. Safety concerns about PrEP present challenges in the implementation and use of PrEP. The aim of this review is to discuss safety concerns observed in completed clinical trials on the use of PrEP. We performed a literature search on PrEP in PubMed, global advocacy for HIV prevention (Aids Vaccine Advocacy Coalition) database, clinical trials registry " http://www.clinicaltrials.gov " and scholar.google, using combination search terms 'pre-exposure prophylaxis', 'safety concerns in the use of pre-exposure prophylaxis', 'truvada use as PrEP', 'guidelines for PrEP use', 'HIV pre-exposure prophylaxis' and 'tenofovir' to identify clinical trials and literature on PrEP. We present findings associated with safety issues on the use of PrEP based on a review of 11 clinical trials on PrEP with results on safety and efficacy as at April 2016. We also reviewed findings from routine real-life practice reports. The pharmacological intervention for PrEP was tenofovir disoproxil fumarate/emtricitabine in a combined form as Truvada ® or tenofovir as a single entity. Both products are efficacious for PrEP and seem to have a good safety profile. Regular monitoring is recommended to prevent long-term toxic effects. The main adverse effects observed with PrEP are gastrointestinal related; basically mild to moderate nausea, vomiting and diarrhea. Other adverse drug effects worth monitoring are liver enzymes, renal function and bone mineral density. PrEP as an intervention to reduce HIV transmission appears to have a safe benefit-risk profile in clinical trials. It is recommended for widespread use but adherence monitoring and real-world safety surveillance are critical in the post-marketing phase to ensure that the benefits

Radiation Safety in Industrial Radiography. Specific Safety Guide (French Edition); Surete radiologique en radiographie industrielle

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-05-15

This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in Horizontal-Ellipsis shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography.

Industrial Student Apprenticeship: Understanding Health and Safety

Science.gov (United States)

Simanjuntak, M. V.; Abdullah, A. G.; Puspita, R. H.; Mahdan, D.; Kamaludin, M.

2018-02-01

The level of accident in industry is very high caused by lack of knowledge and awareness of workers toward the health and safety. Health and Safety are efforts to create a comfortable and productive atmosphere to accomplish a purpose or goal as maximum risk in the workplace. Vocational Education students must conduct training on business and industry, prior to that they should have a clear understanding on occupational health and safety. The purpose of this research is to analyze the understanding, preparation, and implementation of work health and safety of the students. Method used is descriptive method and data are collected using instrument, observation and interview. The result of study is conclusion of understanding occupational health and safety of vocational education students.

10 CFR 34.42 - Radiation Safety Officer for industrial radiography.

Science.gov (United States)

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Radiation Safety Officer for industrial radiography. 34.42 Section 34.42 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION... Radiation Safety Officer for industrial radiography. The RSO shall ensure that radiation safety activities...

Safety management - policy, analysis and implementation

International Nuclear Information System (INIS)

Allen, F.R.

1993-01-01

The nuclear industry is moving towards a period of ever increasing emphasis on business performance and profitability. Safety has, of course, always been a major concern of management in the nuclear industry and elsewhere. The civil aviation industry , for example, has had a similar concern for safety. Other industry sectors are also developing safety management as a response to events within and outside their sectors. In this paper the way that the risk management process as a whole is being addressed is looked at. Can we use risk management, initially a safety-orientated tool, to improve business performance? (author)

Managing nuclear safety research facilities and capabilities in a changing nuclear industry: the contribution of the OECD/NEA

International Nuclear Information System (INIS)

Royen, J.

2000-01-01

Although the safety level of nuclear power plants in OECD countries is very satisfactory and the technologies basic to the resolution of safety issues have advanced considerably, continued nuclear safety research work is necessary to address many of the residual concerns, and it remains an important element in ensuring the safe operation of nuclear power plants. However, the funding levels of national Government safety research programmes have been reduced over recent years. There is concern about the ability of OECD Member countries to sustain an adequate level of nuclear safety research capability. The OECD/NEA has a key role to play in organizing reflection and exchange of information on the most efficient use of available technical resources, and in the international management of nuclear safety research facilities and capabilities in a changing nuclear industry. Possible initiatives are mentioned in the paper. (author)

Safety in construction industry - overview

International Nuclear Information System (INIS)

Chockalingam, S.; Nehru, R.M.; Ramprasad, K.; Sonawane, A.U.

2016-01-01

The construction industry plays an important role in the social and economic development in a country. Safety in the construction industry is considered a major issue in developed and developing countries. In urban sector of India increasing numbers of workers have taken up construction work as a means of immediate employment, which provides cash earnings at the end of the day. Being as unorganized sector, the fatal injuries in DAE unit for the construction industry (Nuclear Power Project including BHAVINI: 62.7% from 1999 to 2014) is higher than the category for all other units (UCIL:13.3%; ECIL:6.7%; NFC and ZC: 4%; HWP: 2.7%; IREL:2.7%; Nuclear Power Plant: 2.7% etc., from 1999 to 2014). A variety hazards exist in the construction site. The best way to protect workers against workers against hazards is to control problems at the source. The problem regarding construction industry is not that the hazards and risks are unknown, but it very difficult to accurately identify in a constantly changing work environment. To prevent hazards at work, all possible hazards that may be encountered should be identified in advance through Job Hazard Analysis (JHA). The present scenario has deduced a fact that efficient Safety Management Techniques (SMT) are (essential for today's construction companies and adaptation of legal requirements including regulatory requirements and proactive safety management techniques will help organizations in providing a better workplace to its employees and reduce the accidents. (author)

International antiterrorist conventions concerning the safety of air transport

Directory of Open Access Journals (Sweden)

Jacek BARCIK

2008-01-01

Full Text Available In this article the international law regulations are presented concerning the civilian safety of the air transport. The history concerning air terrorism and international antiterrorist conventions was described in detail, involving The Chicago Convention, The Tokyo Convention, The Hague Convention and Montreal Convention.

Using game theory to improve safety within chemical industrial parks

CERN Document Server

Reniers, Genserik

2013-01-01

Though the game-theoretic approach has been vastly studied and utilized in relation to economics of industrial organizations, it has hardly been used to tackle safety management in multi-plant chemical industrial settings. Using Game Theory for Improving Safety within Chemical Industrial Parks presents an in-depth discussion of game-theoretic modelling which may be applied to improve cross-company prevention and -safety management in a chemical industrial park.   By systematically analyzing game-theoretic models and approaches in relation to managing safety in chemical industrial parks, Using Game Theory for Improving Safety within Chemical Industrial Parks explores the ways game theory can predict the outcome of complex strategic investment decision making processes involving several adjacent chemical plants. A number of game-theoretic decision models are discussed to provide strategic tools for decision-making situations.   Offering clear and straightforward explanations of methodologies, Using Game Theor...

Radiation safety in nuclear industry in retrospect and perspective

International Nuclear Information System (INIS)

Pan Ziqiang

1993-01-01

More than 30 years have passed since the starting up of nuclear industry in China from the early 1950's. Over the past 30-odd years, nuclear industry has always kept a good record in China thanks to the policy of 'quality first, safety first' clearly put forward for nuclear industry from the outset and a lot of suitable effective measures taken over that period. Internationally, there is rapid progress in radiation protection and nuclear safety (hereafter refereed to as radiation safety) and a number of new concepts in the field of radiation protection have been advanced. Nuclear industry is developing based on the international standardization. To ensure the further development of nuclear utility, radiation safety needs to be further strengthened

Road safety and trade and industry.

OpenAIRE

2014-01-01

Trade and industry mostly experience the negative consequences of crashes, but sometimes the consequences are positive. The negative consequences of road traffic crashes include loss of personnel and damage to vehicles. Some other industries, such as damage repair companies, on the other hand, derive income from road crashes. Trade and industry can also be of importance for road safety. Particularly the transport sector, the car industry and insurers take several initiatives which for example...

Radiation protection and safety in industrial radiography

International Nuclear Information System (INIS)

1999-01-01

The use of ionizing radiation, particularly in medicine and industry, is growing throughout the world, with further expansion likely as technical developments result from research. One of the longest established applications of ionizing radiation is industrial radiography, which uses both X radiation and gamma radiation to investigate the integrity of equipment and structures. Industrial radiography is widespread in almost all Member States. It is indispensable to the quality assurance required in modern engineering practice and features in the work of multinational companies and small businesses alike. Industrial radiography is extremely versatile. The equipment required is relatively inexpensive and simple to operate. It may be highly portable and capable of being operated by a single worker in a wide range of different conditions, such as at remote construction sites, offshore locations and cross-country pipelines as well as in complex fabrication facilities. The associated hazards demand that safe working practices be developed in order to minimize the potential exposure of radiographers and other persons who may be in the vicinity of the work. The use of shielded enclosures (fixed facilities), with effective safety devices, significantly reduces any radiation exposures arising from the work. This Safety Report summarizes good and current state of the art practices in industrial radiography and provides technical advice on radiation protection and safety. It contains information for Regulatory Authorities, operating organizations, workers, equipment manufacturers and client organizations, with the intention of explaining their responsibilities and means to enhance radiation protection and safety in industrial radiography

Enhancing Safety Culture in Complex Nuclear Industry Projects

International Nuclear Information System (INIS)

Gotcheva, N.

2016-01-01

This paper presents an on-going research project “Management principles and safety culture in complex projects” (MAPS), supported by the Finnish Research Programme on Nuclear Power Plant Safety 2015-2018. The project aims at enhancing safety culture and nuclear safety by supporting high quality execution of complex projects in the nuclear industry. Safety-critical industries are facing new challenges, related to increased outsourcing and complexity in technology, work tasks and organizational structures (Milch and Laumann, 2016). In the nuclear industry, new build projects, as well as modernisation projects are temporary undertakings often carried out by networks of companies. Some companies may have little experience in the nuclear industry practices or consideration of specific national regulatory requirements. In large multinational subcontractor networks, the challenge for assuring nuclear safety arises partly from the need to ensure that safety and quality requirements are adequately understood and fulfilled by each partner. Deficient project management practices and unsatisfactory nuclear safety culture in project networks have been recognised as contributing factors to these challenges (INPO, 2010). Prior evidence indicated that many recent major projects have experienced schedule, quality and financial challenges both in the nuclear industry (STUK, 2011) and in the non-nuclear domain (Ahola et al., 2014; Brady and Davies, 2010). Since project delays and quality issues have been perceived mainly as economic problems, project management issues remain largely understudied in safety research. However, safety cannot be separated from other performance aspects if a systemic view is applied. Schedule and quality challenges may reflect deficiencies in coordination, knowledge and competence, distribution of roles and responsibilities or attitudes among the project participants. It is increasingly understood that the performance of the project network in all

Implementation of safety management systems in Hong Kong construction industry - A safety practitioner's perspective.

Science.gov (United States)

Yiu, Nicole S N; Sze, N N; Chan, Daniel W M

2018-02-01

In the 1980s, the safety management system (SMS) was introduced in the construction industry to mitigate against workplaces hazards, reduce the risk of injuries, and minimize property damage. Also, the Factories and Industrial Undertakings (Safety Management) Regulation was introduced on 24 November 1999 in Hong Kong to empower the mandatory implementation of a SMS in certain industries including building construction. Therefore, it is essential to evaluate the effectiveness of the SMS in improving construction safety and identify the factors that influence its implementation in Hong Kong. A review of the current state-of-the-practice helped to establish the critical success factors (CSFs), benefits, and difficulties of implementing the SMS in the construction industry, while structured interviews were used to establish the key factors of the SMS implementation. Results of the state-of-the-practice review and structured interviews indicated that visible senior commitment, in terms of manpower and cost allocation, and competency of safety manager as key drivers for the SMS implementation. More so, reduced accident rates and accident costs, improved organization framework, and increased safety audit ratings were identified as core benefits of implementing the SMS. Meanwhile, factors such as insufficient resources, tight working schedule, and high labor turnover rate were the key challenges to the effective SMS implementation in Hong Kong. The findings of the study were consistent and indicative of the future development of safety management practice and the sustainable safety improvement of Hong Kong construction industry in the long run. Copyright © 2018 National Safety Council and Elsevier Ltd. All rights reserved.

Advances in industrial ergonomics and safety II

Energy Technology Data Exchange (ETDEWEB)

Das, B [ed.; Technical University of Nova Scotia, Halifax, NS (Canada). Dept. of Industrial Engineering

1990-01-01

135 papers were presented at the conference in 20 sessions with the following headings: aging and industrial performance; back injury and rehabilitation; bioinstrumentation and electromyography; cumulative trauma disorders; engineering anthropometry; equipment design and ergonomics; human computer interaction; human performance and worker satisfaction; human strength and testing; industrial accidents and prevention; industrial biomechanics; injuries in health care; manual materials handling; noise and vibration effects; occupational health and safety; robotics and agricultural machinery safety; statistics and modelling in ergonomics; work environment; workplace safety analysis; and workstation design. Papers are included entitled: A model for analyzing mining machine illumination systems' by R.L. Unger, A.F. Glowacki and E.W. Rossi, 'Ergonomic design guidelines for underground coal mining equipment by E.J. Conway and R. Unger, and Hot work environment and human strain - a relation proposed by K. Bhattacharya and S. Raja.

Advances in industrial ergonomics and safety II

Energy Technology Data Exchange (ETDEWEB)

Das, B. (ed.) (Technical University of Nova Scotia, Halifax, NS (Canada). Dept. of Industrial Engineering)

1990-01-01

135 papers were presented at the conference in 20 sessions with the following headings: aging and industrial performance; back injury and rehabilitation; bioinstrumentation and electromyography; cumulative trauma disorders; engineering anthropometry; equipment design and ergonomics; human computer interaction; human performance and worker satisfaction; human strength and testing; industrial accidents and prevention; industrial biomechanics; injuries in health care; manual materials handling; noise and vibration effects; occupational health and safety; robotics and agricultural machinery safety; statistics and modelling in ergonomics; work environment; workplace safety analysis; and workstation design. Papers are included entitled: A model for analyzing mining machine illumination systems' by R.L. Unger, A.F. Glowacki and E.W. Rossi, 'Ergonomic design guidelines for underground coal mining equipment by E.J. Conway and R. Unger, and Hot work environment and human strain - a relation proposed by K. Bhattacharya and S. Raja.

Industrial Safety and Accidents Prevention

International Nuclear Information System (INIS)

Sajjad Akbar

2006-01-01

Accident Hazards, dangers, losses and risk are what we would to like to eliminate, minimize or avoid in industry. Modern industries have created many opportunities for these against which man's primitive instincts offer no protection. In today's complex industrial environment safety has become major preoccupation, especially after the realization that there is a clear economic incentive to do so. Industrial hazards may cause by human error or by physical or mechanical malfunction, it is very often possible to eliminate the worst consequences of human error by engineering modification. But the modification also needs checking very thoroughly to ensue that it has not introduced some new and unsuspected hazard. (author)

Research study about the establishment of safety culture. Effects of organizational factors in construction industry's safety indices

International Nuclear Information System (INIS)

Kojima, Mitsuhiro; Hirose, Humiko; Takano, Kenichi; Hasegawa, Naoko

1999-01-01

To find the relationships between safety related activities (such as safety patrol' or '4s/5s activities') and accidents rate in the workplace, questionnaires were sent to 965 construction companies and 120 answers were returned. In this questionnaire, safety activities, safety regulations and safety policies of the companies were asked and organizational climates, company policies, philosophies and the number of accidents in workplace were also asked. There seems some relationships between accidents rate and safety activities, safety regulations and safety policies in the companies, but the deviations between estimate values and observed values are so great that it seems impossible to estimate the accidents rate in the working place from the safety activities, safety regulations and safety policies of the companies. On the other hand, some characteristics of safety activities and organizational climates in the construction industry were identified using multi variants analysis. More detailed researches using sophisticated questionnaire will be conducted in the construction industry and petrochemical industry and relationships between the accidents rate and the safety activities will be compared between different industries. (author)

Safety concerns related to modular/prefabricated building construction.

Science.gov (United States)

Fard, Maryam Mirhadi; Terouhid, Seyyed Amin; Kibert, Charles J; Hakim, Hamed

2017-03-01

The US construction industry annually experiences a relatively high rate of fatalities and injuries; therefore, improving safety practices should be considered a top priority for this industry. Modular/prefabricated building construction is a construction strategy that involves manufacturing of the whole building or some of its components off-site. This research focuses on the safety performance of the modular/prefabricated building construction sector during both manufacturing and on-site processes. This safety evaluation can serve as the starting point for improving the safety performance of this sector. Research was conducted based on Occupational Safety and Health Administration investigated accidents. The study found 125 accidents related to modular/prefabricated building construction. The details of each accident were closely examined to identify the types of injury and underlying causes. Out of 125 accidents, there were 48 fatalities (38.4%), 63 hospitalized injuries (50.4%), and 14 non-hospitalized injuries (11.2%). It was found that, the most common type of injury in modular/prefabricated construction was 'fracture', and the most common cause of accidents was 'fall'. The most frequent cause of cause (underlying and root cause) was 'unstable structure'. In this research, the accidents were also examined in terms of corresponding location, occupation, equipment as well as activities during which the accidents occurred. For improving safety records of the modular/prefabricated construction sector, this study recommends that future research be conducted on stabilizing structures during their lifting, storing, and permanent installation, securing fall protection systems during on-site assembly of components while working from heights, and developing training programmes and standards focused on modular/prefabricated construction.

Development of Safety Kit for Industrial Radiography Application

International Nuclear Information System (INIS)

Mohd Noorul Ikhsan Ahmad; Amry Amin Abas

2011-01-01

A safety kit for industrial radiography has been developed. The safety kit that consist of a set of technical rod and various size of base that can be used in radiograph of pipe with diameter between half and one and half inch with utilization of collimator. With the kit, radiographers will not having anymore problem to use collimator in their work. The paper discuss about the technical measures of the safety kit and the importance of introducing it to the industry. (author)

Occupational safety in the petroleum industry

Energy Technology Data Exchange (ETDEWEB)

Elsner, W

1987-03-01

The original technique-oriented accident prevention today has grown to a comprehensive occupational workers protection system. Modern occupational safety requires latest strategies. Side by side with technical and organizational measures we see duties for all superiors directed to plant related occupational safety. These new principles of leadership on the basis of occupational safety policies from top management require equivalent tactics to cause change in behaviour of the employees. Such a not only formulated but also accepted safety strategy is extremely clear by its positive results in the petroleum industry.

Radiation safety in industrial applications of nuclear techniques

International Nuclear Information System (INIS)

Lam, E.S.

1981-01-01

The hazards associated with the use of industrial equipment is one of the undesirable by-products of advanced technology. The use of nuclear techniques is a good example. Due to the usefulness of such techniques, one may accept the risks involved if they can be brought down to manageable levels. Most of the nuclear techniques in use in industries in Malaysia require only minimal safety precautions as they make use of only small amounts of radioactive material. However, some large sources are also being used and safety precautions have to be strictly enforced. The management plays a critical role in these industries. The requirements for radiation safety include the monitoring of workers and work areas, the medical surveillance of workers and the provision of barriers and other safety precautions. The management should also look to the training of the workers and be prepared for any emergencies that may arise. (author)

Radiation safety in industrial applications of nuclear techniques

Energy Technology Data Exchange (ETDEWEB)

Lam, E S [Ministry of Health, Kuala Lumpur (Malaysia)

1981-01-01

The hazards associated with the use of industrial equipment is one of the undesirable by-products of advanced technology. The use of nuclear techniques is a good example. Due to the usefulness of such techniques, one may accept the risks involved if they can be brought down to manageable levels. Most of the nuclear techniques in use in industries in Malaysia require only minimal safety precautions as they make use of only small amounts of radioactive material. However, some large sources are also being used and safety precautions have to be strictly enforced. The management plays a critical role in these industries. The requirements for radiation safety include the monitoring of workers and work areas, the medical surveillance of workers and the provision of barriers and other safety precautions. The management should also look to the training of the workers and be prepared for any emergencies that may arise.

Operation safety of complex industrial systems

International Nuclear Information System (INIS)

Zwingelstein, G.

1999-01-01

Zero fault or zero risk is an unreachable goal in industrial activities like nuclear activities. However, methods and techniques exist to reduce the risks to the lowest possible and acceptable level. The operation safety consists in the recognition, evaluation, prediction, measurement and mastery of technological and human faults. This paper analyses each of these points successively: 1 - evolution of operation safety; 2 - definitions and basic concepts: failure, missions and functions of a system and of its components, basic concepts and operation safety; 3 - forecasting analysis of operation safety: reliability data, data-banks, precautions for the use of experience feedback data; realization of an operation safety study: management of operation safety, quality assurance, critical review and audit of operation safety studies; 6 - conclusions. (J.S.)

Pre-Exposure Prophylaxis for HIV Prevention : Safety Concerns

NARCIS (Netherlands)

Tetteh, Raymond A; Yankey, Barbara A; Nartey, Edmund T; Lartey, Margaret; Leufkens, Hubert G M; Dodoo, Alexander N O

Available evidence supports the efficacy of pre-exposure prophylaxis (PrEP) in decreasing the incidence of human immunodeficiency virus (HIV) infection among high-risk individuals, especially when used in combination with other behavioural preventive methods. Safety concerns about PrEP present

Occupational safety of different industrial sectors in Khartoum State, Sudan. Part 1: Safety performance evaluation.

Science.gov (United States)

Zaki, Gehan R; El-Marakby, Fadia A; H Deign El-Nor, Yasser; Nofal, Faten H; Zakaria, Adel M

2012-12-01

Safety performance evaluation enables decision makers improve safety acts. In Sudan, accident records, statistics, and safety performance were not evaluated before maintenance of accident records became mandatory in 2005. This study aimed at evaluating and comparing safety performance by accident records among different cities and industrial sectors in Khartoum state, Sudan, during the period from 2005 to 2007. This was a retrospective study, the sample in which represented all industrial enterprises in Khartoum state employing 50 workers or more. All industrial accident records of the Ministry of Manpower and Health and those of different enterprises during the period from 2005 to 2007 were reviewed. The safety performance indicators used within this study were the frequency-severity index (FSI) and fatal and disabling accident frequency rates (DAFR). In Khartoum city, the FSI [0.10 (0.17)] was lower than that in Bahari [0.11 (0.21)] and Omdurman [0.84 (0.34)]. It was the maximum in the chemical sector [0.33 (0.64)] and minimum in the metallurgic sector [0.09 (0.19)]. The highest DAFR was observed in Omdurman [5.6 (3.5)] and in the chemical sector [2.5 (4.0)]. The fatal accident frequency rate in the mechanical and electrical engineering industry was the highest [0.0 (0.69)]. Male workers who were older, divorced, and had lower levels of education had the lowest safety performance indicators. The safety performance of the industrial enterprises in Khartoum city was the best. The safety performance in the chemical sector was the worst with regard to FSI and DAFR. The age, sex, and educational level of injured workers greatly affect safety performance.

Role of industry in the environmental health and safety aspects of the developing Plowshare industry

Energy Technology Data Exchange (ETDEWEB)

Hilberry, N [University of Arizona (United States)

1969-07-01

lt is first pointed out that no person or organization has a more vital interest in the early establishment of an effective health and safety program within which commercial operations based on Plowshare technology can be carried on with assurance than does that facet of industry which is directly involved in the attempt to prove out these Plowshare applications. The formulation of such a code must be a matter of the highest priority to all concerned. To accomplish this task successfully, however, requires the exercise of a truly hard-nosed objectivity both on the part of the Governmental agencies who bear statutory responsibility for ensuring the public health and safety and also on that of the industrial groups who are trying to realize the significant economic potentials inherent in the Plowshare technology. While it is abundantly clear that achievement of a sound and reliable public health and safety code is imperative for both regulatory agencies and operating industry, it must also be recognized that both groups serve the inescapable additional responsibility of acting as the public's trustees to assure the healthy development of a new technology which may well prove to be of vital importance to the Nation. The basic nature of the joint operating procedure required in order to provide an effective way of fulfilling these common obligations is then examined. The discussion then turns to the present stage of the developmental progress of the potential Plowshare industry. Scientific breakthrough has long since been accomplished and scientific feasibility has been quite generally proven. For a number of important possible applications even technological feasibility has been established. In these cases the demonstration of economic feasibility and the attainment of public acceptance are the two factors that still remain to be achieved before a full-fledged if still infant industry becomes a reality. Industry alone is capable of determining economic feasibility. It

Role of industry in the environmental health and safety aspects of the developing Plowshare industry

International Nuclear Information System (INIS)

Hilberry, N.

1969-01-01

lt is first pointed out that no person or organization has a more vital interest in the early establishment of an effective health and safety program within which commercial operations based on Plowshare technology can be carried on with assurance than does that facet of industry which is directly involved in the attempt to prove out these Plowshare applications. The formulation of such a code must be a matter of the highest priority to all concerned. To accomplish this task successfully, however, requires the exercise of a truly hard-nosed objectivity both on the part of the Governmental agencies who bear statutory responsibility for ensuring the public health and safety and also on that of the industrial groups who are trying to realize the significant economic potentials inherent in the Plowshare technology. While it is abundantly clear that achievement of a sound and reliable public health and safety code is imperative for both regulatory agencies and operating industry, it must also be recognized that both groups serve the inescapable additional responsibility of acting as the public's trustees to assure the healthy development of a new technology which may well prove to be of vital importance to the Nation. The basic nature of the joint operating procedure required in order to provide an effective way of fulfilling these common obligations is then examined. The discussion then turns to the present stage of the developmental progress of the potential Plowshare industry. Scientific breakthrough has long since been accomplished and scientific feasibility has been quite generally proven. For a number of important possible applications even technological feasibility has been established. In these cases the demonstration of economic feasibility and the attainment of public acceptance are the two factors that still remain to be achieved before a full-fledged if still infant industry becomes a reality. Industry alone is capable of determining economic feasibility. It

Food safety concerns of fast food consumers in urban Ghana.

Science.gov (United States)

Omari, Rose; Frempong, Godfred

2016-03-01

In Ghana, out-of-home ready-to-eat foods including fast food generally have been associated with food safety problems. Notwithstanding, fast food production and consumption are increasing in Ghana and therefore this study sought to determine the food safety issues of importance to consumers and the extent to which they worry about them. First, through three focus group discussions on consumers' personal opinions about food safety issues, some emergent themes were obtained, which were used to construct an open-ended questionnaire administered face-to-face to 425 respondents systematically sampled from 20 fast food restaurants in Accra. Findings showed that most fast food consumers were concerned about food hazards such as pesticide residue in vegetables, excessive use of artificial flavour enhancers and colouring substances, bacterial contamination, migrated harmful substances from plastic packages, and general unhygienic conditions under which food is prepared and sold. Consumers also raised concerns about foodborne diseases such as cholera, typhoid, food poisoning, diarrhoea, bird flu and swine flu. The logistic regression model showed that being male increased the likelihood of worrying about general food safety issues and excessive use of flavour enhancers than in females while being youthful increased the likelihood of being worried about typhoid fever than in older consumers. These findings imply that consumers in urban Ghana are aware and concerned about current trends of food safety and foodborne disease challenges in the country. Therefore, efforts targeted at improving food safety and reducing incidences of foodborne diseases should not only focus on public awareness creation but should also design more comprehensive programmes to ensure the making of food safety rules and guidelines and enforcing compliance to facilitate availability and consumers' choice of safe foods. Copyright © 2015 Elsevier Ltd. All rights reserved.

FOOD SAFETY IN CATERING INDUSTRY

Directory of Open Access Journals (Sweden)

P. Cattaneo

2009-03-01

Full Text Available Catering industry plays a very important role in public health management, because about 30% of total daily meals are consumed in catering industry (restaurants, bar. In this work food safety was evaluated in 20 catering centres throughout microbiological analyses of different categories of meals. Results demonstrate that there was an important decrease of microbial contamination between 2006 and 2007, no pathogens were found in 217 samples examined: this was obtained by improving voluntary controls.

'Speaking up' about patient safety concerns and unprofessional behaviour among residents: validation of two scales.

Science.gov (United States)

Martinez, William; Etchegaray, Jason M; Thomas, Eric J; Hickson, Gerald B; Lehmann, Lisa Soleymani; Schleyer, Anneliese M; Best, Jennifer A; Shelburne, Julia T; May, Natalie B; Bell, Sigall K

2015-11-01

To develop and test the psychometric properties of two new survey scales aiming to measure the extent to which the clinical environment supports speaking up about (a) patient safety concerns and (b) unprofessional behaviour. Residents from six large US academic medical centres completed an anonymous, electronic survey containing questions regarding safety culture and speaking up about safety and professionalism concerns. Confirmatory factor analysis supported two separate, one-factor speaking up climates (SUCs) among residents; one focused on patient safety concerns (SUC-Safe scale) and the other focused on unprofessional behaviour (SUC-Prof scale). Both scales had good internal consistency (Cronbach's α>0.70) and were unique from validated safety and teamwork climate measures (rspeaking up behaviour about safety and professionalism concerns (r=0.21, pspeaking up behaviour among residents. These two scales may fill an existing gap in residency and safety culture assessments by measuring the openness of communication about safety and professionalism concerns, two important aspects of safety culture that are under-represented in existing metrics. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Correlation of Safety Culture Attributes in Construction Industry

Directory of Open Access Journals (Sweden)

Pervez Shaikh

2013-07-01

Full Text Available The importance of construction industry can not be overemphasized because it is one of the biggest contributors toward economic activities of a country. It employs a countable number of workforce and it is prone to accidents, incidents, hazards and disasters, therefore, the safety factor is equally important. The current research explores safety culture in the perspective of its important attributes. The EFQM (European Foundation for Quality Management is taken as the bases for finding the ways and means of safety culture improvement of the construction industry. The correlation of pattern of responses is found for every attribute of the safety culture and the interrelationships and strengths are worked out to detect the involvement of the attribute.

Food colors: Existing and emerging food safety concerns.

Science.gov (United States)

Oplatowska-Stachowiak, Michalina; Elliott, Christopher T

2017-02-11

Food colors are added to different types of commodities to increase their visual attractiveness or to compensate for natural color variations. The use of these additives is strictly regulated in the European Union, the United States, and many other countries worldwide. There is a growing concern about the safety of some commonly used legal food colorants and there is a trend to replace the synthetic forms with natural products. Additionally, a number of dyes with known or suspected genotoxic or carcinogenic properties have been shown to be added illegally to foods. Robust monitoring programs based on reliable detection methods are required to assure the food is free from harmful colors. The aim of this review is to present an up to date status of the various concerns arising from use of color additives in food. The most important food safety concerns in the field of food colors are lack of uniform regulation concerning legal food colors worldwide, possible link of artificial colors to hyperactive behavior, replacement of synthetic colors with natural ones, and the presence of harmful illegal dyes-both known but also new, emerging ones in food. The legal status of food color additives in the EU, United States, and worldwide is summarized. The reported negative health effects of both legal and illegal colors are presented. The European Rapid Alert System for Food and Feed notifications and US import alerts concerning food colors are analyzed and trends in fraudulent use of color additives identified. The detection methods for synthetic colors are also reviewed.

Human and Organisational Safety Barriers in the Oil & Gas Industry

International Nuclear Information System (INIS)

Nystad, E.; Szőke, I.

2016-01-01

The oil & gas industry is a safety-critical industry where errors or accidents may potentially have severe consequences. Offshore oil & gas installations are complex technical systems constructed to pump hydrocarbons from below the seabed, process them and pipe them to onshore refineries. Hydrocarbon leaks may lead to major accidents or have negative environmental impacts. The industry must therefore have a strong focus on safety. Safety barriers are devices put into place to prevent or reduce the effects of unwanted incidents. Technical barriers are one type of safety barrier, e.g., blow-out preventers to prevent uncontrolled release of hydrocarbons from a well. Human operators may also have an important function in maintaining safety. These human operators are part of a larger organisation consisting of different roles and responsibilities and with different mechanisms for ensuring safety. This paper will present two research projects from the Norwegian oil & gas industry that look at the role of humans and organisations as safety barriers. The first project used questionnaire data to investigate the use of mindful safety practices (safety-promoting work practices intended to prevent or interrupt unwanted events) and what contextual factors may affect employees’ willingness to use these safety practices. Among the findings was that employees’ willingness to use mindful safety practices was affected more by factors on a group level than factors at an individual or organisational level, and that the factors may differ depending on what is the object of a practice—the employee or other persons. It was also suggested that employees’ willingness to use mindful safety practices could be an indicator used in the assessment of the safety level on oil & gas installations. The second project is related to organisational safety barriers against major accidents. This project was based on a review of recent incidents in the Norwegian oil & gas industry, as well as

Safety Considerations in the Chemical Process Industries

Science.gov (United States)

Englund, Stanley M.

There is an increased emphasis on chemical process safety as a result of highly publicized accidents. Public awareness of these accidents has provided a driving force for industry to improve its safety record. There has been an increasing amount of government regulation.

Installation services in the lignite industry. Implementing health and safety; Montageeinsaetze in der Braunkohlenindustrie. Handlungsfeld fuer den Arbeitsschutz

Energy Technology Data Exchange (ETDEWEB)

Roskopf, Norbert [Roskopf Vulkanisation GmbH, Aachen (Germany)

2011-07-01

The increasing number of assignments of contractors in the lignite industry challenges both the client and the contractor with respect to health and safety. Additional endeavours have to be made concerning information, communication, coordination and assurance. Quantitative differences of occupational safety can be made up by operator support. The contractor himself is required to highly focus on health and safety issues. The European Agency for Safety and Health at Work (EU OSHA) and its campaign 'Healthy Workplaces - Safe Maintenance' currently raises the awareness of all parties being involved. More information can be found under http://hw.osha.europa.eu. (orig.)

On the future of safety in the manufacturing industry

OpenAIRE

Reniers, G.

2017-01-01

Abstract: This paper argues that a new paradigm is needed in the manufacturing industry to further substantially advance safety as part of the industry 4.0 concept. The different domains that need to be focused upon are Cluster-thinking and cooperation, High transparency and efficient inspections, Education and training, Security integration, and Safety innovation. Since society has fundamentally changed over the last two decades, revolutionizing safety via these domains is truly needed in th...

Multilevel model of safety climate for furniture industries.

Science.gov (United States)

Rodrigues, Matilde A; Arezes, Pedro M; Leão, Celina P

2015-01-01

Furniture companies can analyze their safety status using quantitative measures. However, the data needed are not always available and the number of accidents is under-reported. Safety climate scales may be an alternative. However, there are no validated Portuguese scales that account for the specific attributes of the furniture sector. The current study aims to develop and validate an instrument that uses a multilevel structure to measure the safety climate of the Portuguese furniture industry. The Safety Climate in Wood Industries (SCWI) model was developed and applied to the safety climate analysis using three different scales: organizational, group and individual. A multilevel exploratory factor analysis was performed to analyze the factorial structure. The studied companies' safety conditions were also analyzed. Different factorial structures were found between and within levels. In general, the results show the presence of a group-level safety climate. The scores of safety climates are directly and positively related to companies' safety conditions; the organizational scale is the one that best reflects the actual safety conditions. The SCWI instrument allows for the identification of different safety climates in groups that comprise the same furniture company and it seems to reflect those groups' safety conditions. The study also demonstrates the need for a multilevel analysis of the studied instrument.

Safety in construction industry

International Nuclear Information System (INIS)

Khan, A.M.

1979-01-01

Causative factors of accidents in construction industry in the context of experience of construction work of the Rajasthan Atomic Power Project are enumerated. The aspect of accident cost - direct and indirect - is discussed briefly. Setting up of a safety set-up at construction sites is emphasized and principles which should guide the accident prevention programme are spelt out. (M.G.B.)

THE INFLUENCE OF MEDIA EXPOSURE, SAFETY AND HEALTH CONCERNS, AND SELF-EFFICACY ON ENVIRONMENTAL ATTITUDES TOWARDS ELECTRONIC GREEN PRODUCTS

Directory of Open Access Journals (Sweden)

Iman Khalid A. Qader

2011-07-01

Full Text Available As the high-tech industry evolves at a rapid pace, vast amounts of hazardous materials are used in fuelling its global expansion. These rapid changes in production processes are significantly depleting natural resources. With the surge of popular interest and awareness pertaining to environmental issues, organisations may be in peril if consumers' attitudes towards their products are ignored. This study intends to understand consumers' environmental attitudes towards electronic green products and to identify the effect of three factors, namely, media exposure, safety and health concerns, and self- efficacy, on this attitude. Data were collected via a self-administered questionnaire among 170 respondents in a public university. The results of the study indicated that safety and health concerns as well as self-efficacy had significant positive impacts on consumers' environmental attitudes. Surprisingly, however, media exposure did not exhibit any significant influence on consumers' environmental attitude. It is recommended that campaign and awareness projects focus on safety and health issues. Additionally, media should play a more active role in increasing environmental awareness among consumers.

Nuclear Safety

International Nuclear Information System (INIS)

1978-09-01

In this short paper it has only been possible to deal in a rather general way with the standards of safety used in the UK nuclear industry. The record of the industry extending over at least twenty years is impressive and, indeed, unique. No other industry has been so painstaking in protection of its workers and in its avoidance of damage to the environment. Headings are: introduction; how a nuclear power station works; radiation and its effects (including reference to ICRP, the UK National Radiological Protection Board, and safety standards); typical radiation doses (natural radiation, therapy, nuclear power programme and other sources); safety of nuclear reactors - design; key questions (matters of concern which arise in the public mind); safety of operators; safety of people in the vicinity of a nuclear power station; safety of the general public; safety bodies. (U.K.)

Aviation Safety Concerns for the Future

Science.gov (United States)

Smith, Brian E.; Roelen, Alfred L. C.; den Hertog, Rudi

2016-01-01

The Future Aviation Safety Team (FAST) is a multidisciplinary international group of aviation professionals that was established to identify possible future aviation safety hazards. The principle was adopted that future hazards are undesirable consequences of changes, and a primary activity of FAST became identification and prioritization of possible future changes affecting aviation. Since 2004, FAST has been maintaining a catalogue of "Areas of Change" (AoC) that could potentially influence aviation safety. The horizon for such changes is between 5 to 20 years. In this context, changes must be understood as broadly as possible. An AoC is a description of the change, not an identification of the hazards that result from the change. An ex-post analysis of the AoCs identified in 2004 demonstrates that changes catalogued many years previous were directly implicated in the majority of fatal aviation accidents over the past ten years. This paper presents an overview of the current content of the AoC catalogue and a subsequent discussion of aviation safety concerns related to these possible changes. Interactions among these future changes may weaken critical functions that must be maintained to ensure safe operations. Safety assessments that do not appreciate or reflect the consequences of significant interaction complexity will not be fully informative and can lead to inappropriate trade-offs and increases in other risks. The FAST strongly encourages a system-wide approach to safety risk assessment across the global aviation system, not just within the domain for which future technologies or operational concepts are being considered. The FAST advocates the use of the "Areas of Change" concept, considering that several possible future phenomena may interact with a technology or operational concept under study producing unanticipated hazards.

Managing for safety and safety culture within the UK nuclear industry. A regulator's perspective

International Nuclear Information System (INIS)

Tyrer, M.J.

2002-01-01

This paper outlines the basis of the legal system for the regulation of health and safety at work within the United Kingdom (UK), and in particular, the regulation of the nuclear industry. The framework, formulated by the regulator, which has been published as a practical guide for directors, managers, health and safety professionals and employee representatives for the successful management of health and safety is explained. This guidance, however, concentrates, to a large extent, on management systems and only addresses in part the types of issues, such as behaviours, values, attitudes and beliefs which contribute to the safety culture of an organization. The regulator of the UK nuclear industry has considered research, and other work, carried out by several organizations in this area, notably the Advisory Committee on the Safety of Nuclear Installations (ACSNI) and the International Atomic Energy Agency (IAEA), and produced its own framework for managing for safety at nuclear installations. As a regulator, the Health and Safety Executive (HSE), and its inspectorate responsible for regulation of the nuclear industry, HM Nuclear Installations Inspectorate (HMNII), are not the appropriate organization to assess the safety culture of an organization, but positively encourage organizations to both carry out this assessment themselves and to monitor their performance. To this end, HSE has developed, and made available, the Health and Safety Climate Tool which is aimed at providing organizations with information which can be used as part of a continuous improvement process. (author)

High safety in the mining industry

Energy Technology Data Exchange (ETDEWEB)

1987-08-01

Presents an interview in question and answer format with the deputy chairman of Gosgortekhnadzor (Committee for Supervision of Industrial Work Safety and Mining Supervision) in which he discusses two recent fatal accidents in the Yasinovskaya-Glubokaya and Chaikino coal mines and identifies areas where safety needs to be improved (more automation, protective devices, ventilation etc.). Discusses the particular problems involved with deep mining (20% of mines are now deeper than 700 m and 27 mines are deeper than 1000 m), such as fires, dust, methane, rock falls, insufficient maintenance and strata control and poor ventilation. Confirms that a large number of accidents is due to poor organization and stresses the fact the coal industry must be subjected to perestroika (restructuring) as much as other areas of society.

Safety and security profiles of industry networks used in safety- critical applications

Directory of Open Access Journals (Sweden)

Mária FRANEKOVÁ

2008-01-01

Full Text Available The author describes the mechanisms of safety and security profiles of industry and communication networks used within safety – related applications in technological and information levels of process control recommended according to standards IEC 61784-3,4. Nowadays the number of vendors of the safety – related communication technologies who guarantees besides the standard communication, the communication amongst the safety – related equipment according to IEC 61508 is increasing. Also the number of safety – related products is increasing, e. g. safety Fieldbus, safety PLC, safety curtains, safety laser scanners, safety buttons, safety relays and other. According to world survey the safety Fieldbus denoted the highest growth from all manufactured safety products.The main part of this paper is the description of the safety-related Fieldbus communication system, which has to guaranty Safety Integrity Level.

Safety- and Risk Analysis Activities in Chemical Industry in Europe

International Nuclear Information System (INIS)

Kozine, Igor; Duijm, Nijs Jan; Lauridsen Kurt

2001-01-01

European and International mechanism of handling safety- and risk-related matters. So, the Organisation for Economic Co-operation and Development's (OECD) core objective on risk management is to support Member countries' efforts to develop national policies and actions, and, where appropriate, to develop and implement international risk management measures. In support of this objective, the OECD Risk Management Programme focuses on two areas: (1) developing methods and technical tools that can be used by OECD and Member countries to enhance their current risk management programmes; and (2) identifying specific chemical exposures of concern in Member countries and evaluating possible risk management opportunities. The current paper highlights the EU legislation on major accident hazards related to the chemical industry, differences in the national approaches to risk analyses in the process industry and European-scale activity in improving the understanding of the sources of uncertainty in risk assessments

Safety- and Risk Analysis Activities in Chemical Industry in Europe

Energy Technology Data Exchange (ETDEWEB)

Kozine, Igor; Duijm, Nijs Jan; Lauridsen Kurt [Risoe National Laboratory, Roskilde (Denmark). Systems Analysis Department

2001-07-01

. In this respect there is a European and International mechanism of handling safety- and risk-related matters. So, the Organisation for Economic Co-operation and Development's (OECD) core objective on risk management is to support Member countries' efforts to develop national policies and actions, and, where appropriate, to develop and implement international risk management measures. In support of this objective, the OECD Risk Management Programme focuses on two areas: (1) developing methods and technical tools that can be used by OECD and Member countries to enhance their current risk management programmes; and (2) identifying specific chemical exposures of concern in Member countries and evaluating possible risk management opportunities. The current paper highlights the EU legislation on major accident hazards related to the chemical industry, differences in the national approaches to risk analyses in the process industry and European-scale activity in improving the understanding of the sources of uncertainty in risk assessments.

The Safety Attitudes of Senior Managers in the Chinese Coal Industry

Directory of Open Access Journals (Sweden)

Jiangshi Zhang

2016-11-01

Full Text Available Introduction: Senior managers’ attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers′ attitudes towards safety in the Chinese coal industry. Method: We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions: Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5, and six were at a relatively high level (4.5 > mean > 4.0. Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers′ safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers′ unions not playing their role effectively. Practical Applications: We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry.

The Safety Attitudes of Senior Managers in the Chinese Coal Industry.

Science.gov (United States)

Zhang, Jiangshi; Chen, Na; Fu, Gui; Yan, Mingwei; Kim, Young-Chan

2016-11-17

Introduction: Senior managers' attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers' attitudes towards safety in the Chinese coal industry. Method : We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions : Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5), and six were at a relatively high level (4.5 > mean > 4.0). Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers' safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers' unions not playing their role effectively. Practical Applications : We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry.

The Safety Attitudes of Senior Managers in the Chinese Coal Industry

Science.gov (United States)

Zhang, Jiangshi; Chen, Na; Fu, Gui; Yan, Mingwei; Kim, Young-Chan

2016-01-01

Introduction: Senior managers’ attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers′ attitudes towards safety in the Chinese coal industry. Method: We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions: Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5), and six were at a relatively high level (4.5 > mean > 4.0). Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers′ safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers′ unions not playing their role effectively. Practical Applications: We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry. PMID:27869654

Further activities of safety culture toward nuclear transportation industry

International Nuclear Information System (INIS)

Machida, Y.; Shimakura, D.

2004-01-01

On September 30, 1999, a criticality accident occurred at the uranium processing facility of the JCO Co. Ltd. (hereinafter referred to as ''JCO'') Tokai plant, located in Tokaimura, Ibaraki Prefecture. This was an unprecedented accident in Japan's history of peaceful use of nuclear power, resulting in three workers exposed to severe radiation, two of whom died, and the evacuation and enforced indoor confinement of local residents. Nuclear power suppliers must take personal responsibility for ensuring safety. In this connection, the electric power industry, heavy electric machinery manufacturers, fuel fabricators, and nuclear power research organizations gathered together to establish the Nuclear Safety Network (NSnet) in December 1999, based on the resolve to share and improve the level of the safety culture across the entire nuclear power industry and to assure that such an accident never occurs again. NSnet serves as a link between nuclear power enterprises, research organizations, and other bodies, based on the principles of equality and reciprocity. A variety of activities are pursued, such as diffusing a safety culture, implementing mutual evaluation among members, and exchanging safety-related information. Aiming to share and improve the safety culture throughout the entire nuclear power industry, NSnet thoroughly implements the principle of safety first, while at the same time making efforts to restore trust in nuclear power

A discussion of occupational health and safety management for the catering industry in China.

Science.gov (United States)

Qiang, Chen; Chow, Wan Ki

2007-01-01

The catering industry is developing rapidly in China. Statistics in 2002 indicated that there were over 3.5 million dining places in China, hiring over 18 million people. However, the accident rate was high. Occupational health and safety (OHS) has to be watched more carefully. It is proposed to develop an OHS management system for the catering industry and to integrate it with an ongoing management system by referring to OHSAS 18001:1999. The first step is risk identification and evaluating the major factors concerned by referring to the codes in China, the list of occupational diseases, operation rules, requirements of the law, and records of past incidents. The technological aspect has to be considered in working out the safety strategies. This includes technical measures in accident prevention at the workplace. The kitchen is the main area to be focused on. Methods for hazard identification and risk assessment of dangerous factors in kitchens are proposed in this paper.

Industrial Radiography Safety in Australia

International Nuclear Information System (INIS)

Hockings, Colin

2006-01-01

400 μSv average for industrial radiographers in a developed country such as the United Kingdom (NRPB 2005), it is less than that reported for a developing country such as Iran (AEOI 2004), which is 1650 μSv. Industrial radiography accidents most frequently occur with radiation devices using sealed sources such as iridium 192 and cobalt 60, and not with x-ray generators. In comparison to other countries, the safety record of industrial radiographers as judged by accident data and dose records, places Australia somewhere between that of an advanced country and a developing one. Many of the investigations into accidents in industrial radiography have revealed that their frequency and severity would have been reduced or even eliminated if the persons involved had been better prepared to use the equipment, and better prepared to deal with accident and incident situations. In Australia, there appears to be scope for improvement and standardisation of training in the use of industrial radiography equipment, and more importantly, in the training for response to possible accidents and incidents. A national standard for radiation safety training and assessment should be developed by a competent organisation such as the Australian Institute for Non-Destructive Testing. It should be incorporated into the Code of Practice or Safety Guide for industrial radiography and adopted by all jurisdictions. The use of a code of safe practice for industrial radiography should continue. The present NH and MRC code is in need of review. Such a review must result in a code and a guideline document which are readily useable by the industry, standardise training in radiation safety, ensure a high level of operational radiation safety and are available for adoption by the various Australian jurisdictions with minimal supplementary local requirements. Copyright (2006) The Australian Institute for Non-Destructive Testing

Driving and dementia: Efficient approach to driving safety concerns in family practice.

Science.gov (United States)

Lee, Linda; Molnar, Frank

2017-01-01

To provide primary care physicians with an approach to driving safety concerns when older persons present with memory difficulties. The approach is based on an accredited memory clinic training program developed by the Centre for Family Medicine Primary Care Collaborative Memory Clinic. One of the most challenging aspects of dementia care is the assessment of driving safety. Drivers with dementia are at higher risk of motor vehicle collisions, yet many drivers with mild dementia might be safely able to continue driving for several years. Because safe driving is dependent on multiple cognitive and functional skills, clinicians should carefully consider many factors when determining if cognitive concerns affect driving safety. Specific findings on corroborated history and office-based cognitive testing might aid in the physician's decisions to refer for comprehensive on-road driving evaluation and whether to notify transportation authorities in accordance with provincial reporting requirements. Sensitive communication and a person-centred approach are essential. Primary care physicians must consider many factors when determining if cognitive concerns might affect driving safety in older drivers. Copyright© the College of Family Physicians of Canada.

Risk management for industrial safety

International Nuclear Information System (INIS)

Novogno, A.

1989-01-01

The catastrophic accidents which have occurred in the last decade, in both developed and developing countries, have drawn the attention of decision-makers in the safety area to the urgent necessity to assess and manage risks from hazardous industrial activities which are concentrated in large industrialized areas. The aim of this paper is to review experience gained in conducting studies in the area of 'comparisons of risks in energy systems' and on the practical application of 'cost effectiveness of risk reduction analysis among different energy systems' (case studies). It is also the aim of the paper to discuss and propose a general framework for defining an 'integrated approach' to risk assessment and management in highly industrialized regions within a country. (author)

The electron accelerator in industry - safety aspects

International Nuclear Information System (INIS)

Kirthi, K.N.

1993-01-01

Electron beam accelerators are being used in increasing numbers in a variety of important applications. Commercial uses include radiography, food preservation, product sterilisation and radiation processing of materials. Since most of the industrial applications involve products, some that can be treated with electrons and others that require photons, electron accelerators serve this dual purpose economically. Although industrial accelerators are now regarded as standard products, finished installations show considerable diversity, reflecting the users, needs and planning. Because of the high radiation output, proper planning regarding safety is warranted. This paper discusses the hazards, safety and planning required during design and operation of the electron beam accelerators. (author). 4 refs., 1 fig

A Systematic Analysis of Functional Safety Certification Practices in Industrial Robot Software Development

Directory of Open Access Journals (Sweden)

Tong Xie

2017-01-01

Full Text Available For decades, industry robotics have delivered on the promise of speed, efficiency and productivity. The last several years have seen a sharp resurgence in the orders of industrial robots in China, and the areas addressed within industrial robotics has extended into safety-critical domains. However, safety standards have not yet been implemented widely in academia and engineering applications, particularly in robot software development. This paper presents a systematic analysis of functional safety certification practices in software development for the safety-critical software of industrial robots, to identify the safety certification practices used for the development of industrial robots in China and how these practices comply with the safety standard requirements. Reviewing from Chinese academic papers, our research shows that safety standards are barely used in software development of industrial robot. The majority of the papers propose various solutions to achieve safety, but only about two thirds of the papers refer to non-standardized approaches that mainly address the systematic level rather than the software development level. In addition, our research shows that with the development of artificial intelligent, an emerging field is still on the quest for standardized and suitable approaches to develop safety-critical software.

Application of VR and HF technologies for improving industrial safety

NARCIS (Netherlands)

Loupos, K.; Christopoulos, D.; Vezzadini, L.; Hoekstra, W.; Salem, W.; Chung, P.W.H.

2007-01-01

Safety in industrial environments can nowadays be regarded as an issue of major importance. Large amounts of money are spent by industries on this matter in order to improve safety in all levels, by reducing risks of causing damages to equipment, human injuries or even fatalities. Virtual Reality

Further activities of safety culture toward nuclear transportation industry

Energy Technology Data Exchange (ETDEWEB)

Machida, Y.; Shimakura, D. [NSnet, Tokyo (Japan)

2004-07-01

On September 30, 1999, a criticality accident occurred at the uranium processing facility of the JCO Co. Ltd. (hereinafter referred to as ''JCO'') Tokai plant, located in Tokaimura, Ibaraki Prefecture. This was an unprecedented accident in Japan's history of peaceful use of nuclear power, resulting in three workers exposed to severe radiation, two of whom died, and the evacuation and enforced indoor confinement of local residents. Nuclear power suppliers must take personal responsibility for ensuring safety. In this connection, the electric power industry, heavy electric machinery manufacturers, fuel fabricators, and nuclear power research organizations gathered together to establish the Nuclear Safety Network (NSnet) in December 1999, based on the resolve to share and improve the level of the safety culture across the entire nuclear power industry and to assure that such an accident never occurs again. NSnet serves as a link between nuclear power enterprises, research organizations, and other bodies, based on the principles of equality and reciprocity. A variety of activities are pursued, such as diffusing a safety culture, implementing mutual evaluation among members, and exchanging safety-related information. Aiming to share and improve the safety culture throughout the entire nuclear power industry, NSnet thoroughly implements the principle of safety first, while at the same time making efforts to restore trust in nuclear power.

Incorporating Workplace Injury to Measure the Safety Performance of Industrial Sectors in Taiwan

Directory of Open Access Journals (Sweden)

Li-Ting Yeh

2017-12-01

Full Text Available The severity of workplace injuries varies by industry. Information on workplace injuries can enable firms and governments to effectively improve their safety performance based on the specific contexts of each industry. Incorporating the three workplace injury rates (being wounded or ill, disability, and death, a data envelopment analysis (DEA model is developed to evaluate the safety performance of 17 industrial sectors in Taiwan. The results suggest that the Taiwanese government should pay particular attention to the mining and quarrying industry, which has the lowest safety performance. Additionally, the results provide abundant information for the Taiwanese government to design industry safety regulations in a way that may prompt firms to develop a sustainable economy by improving their health and safety practices and enhancing their overall safety performance.

EFFICIENCY OF FIRE-FIGHTING PROTECTION OBJECTS IN PROVISION OF FIRE SAFETY AT INDUSTRIAL ENTERPRISES

Directory of Open Access Journals (Sweden)

A. V. Zhovna

2008-01-01

Full Text Available The paper gives an analysis of economic results pertaining to organization of a system for fire-fighting protection of industrial enterprises in theRepublicofBelarus. Statistical data on operational conditions of technical means of fire-fighting protection, particularly, automatic systems for detection and extinguishing of fires, systems of internal fire-fighting water-supply.  Requirements and provisions  of normative and technical documents are thoroughly studied. Observance of these documents is to ensure the required level of  fire safety. On the basis of the obtained results concerning  economic analysis of efficiency optimization directions are defined for selection of technical means of fire-fighting protection at objects of industrial purpose.

Food safety issues and training methods for ready-to-eat foods in the grocery industry.

Science.gov (United States)

Binkley, Margaret; Ghiselli, Richard

2005-10-01

As Americans have become more pressed for time, the use of convenient, simplified meals become a way of life. One aspect of this trend, known as Home Meal Replacement (IIMR), has increased in sales since its inception. Between 1999 and 2001, the average annual expenditure per consumer rose 5.6 pereent, and $958 per person per year was spent in 2002. Along with this growth, food safety risks may have increased. The study reported here examined efforts being undertaken by grocery and convenience stores to control the wholesomeness of INR food items. After a convenience sample of 500 grocery store executives was identified, a 32-item questionnaire was developed and mailed to the executives. The results indicate that the industry has taken food safety seriously with only 10 pereent reporting that they have no food safety training. The executives cited employee turnover as a major concern in food safety today, along with lack of food safety knowledge of the consumer and improper holding temperatures.

Safety applications of computer based systems for the process industry

International Nuclear Information System (INIS)

Bologna, Sandro; Picciolo, Giovanni; Taylor, Robert

1997-11-01

Computer based systems, generally referred to as Programmable Electronic Systems (PESs) are being increasingly used in the process industry, also to perform safety functions. The process industry as they intend in this document includes, but is not limited to, chemicals, oil and gas production, oil refining and power generation. Starting in the early 1970's the wide application possibilities and the related development problems of such systems were recognized. Since then, many guidelines and standards have been developed to direct and regulate the application of computers to perform safety functions (EWICS-TC7, IEC, ISA). Lessons learnt in the last twenty years can be summarised as follows: safety is a cultural issue; safety is a management issue; safety is an engineering issue. In particular, safety systems can only be properly addressed in the overall system context. No single method can be considered sufficient to achieve the safety features required in many safety applications. Good safety engineering approach has to address not only hardware and software problems in isolation but also their interfaces and man-machine interface problems. Finally, the economic and industrial aspects of the safety applications and development of PESs in process plants are evidenced throughout all the Report. Scope of the Report is to contribute to the development of an adequate awareness of these problems and to illustrate technical solutions applied or being developed

Concern for older parts

International Nuclear Information System (INIS)

Titus, E.; Spink, T.; Cookson, B.; Tenera, L.P.

1992-01-01

For the last half decade, regulatory expectations of the procurement process for nuclear commercial-grade safety-related materials have increase. The changes have been driven by concern for fraudulent or misrepresented parts and the loss of original equipment manufacturers. The industry responded to these concerns by developing improved procurement programs that changed how parts were specified and received and provided for verification of attributes that were critical to the successful performance of safety functions(s). Like its counterparts, Duquesne Light Company (DLCo), Beaver Valley power station began applying these enhanced requirements to procurements initiated after January 1, 1990, in response to the Nuclear Management and Resources Council initiative on dedication. Procurements prior to this data were not subject to the new requirements

Operation safety of complex industrial systems. Main concepts

International Nuclear Information System (INIS)

Zwingelstein, G.

2009-01-01

Operation safety consists in knowing, evaluating, foreseeing, measuring and mastering the technological system and human failures in order to avoid their impacts on health and people's safety, on productivity, and on the environment, and to preserve the Earth's resources. This article recalls the main concepts of operation safety: 1 - evolutions in the domain; 2 - failures, missions and functions of a system and of its components: functional failure, missions and functions, industrial processes, notions of probability; 3 - basic concepts and operation safety: reliability, unreliability, failure density, failure rate, relations between them, availability, maintainability, safety. (J.S.)

Safety practices in Jordanian manufacturing enterprises within industrial estates.

Science.gov (United States)

Khrais, Samir; Al-Araidah, Omar; Aweisi, Assaf Mohammad; Elias, Fadia; Al-Ayyoub, Enas

2013-01-01

This paper investigates occupational health and safety practices in manufacturing enterprises within Jordanian industrial estates. Response rates were 21.9%, 58.6% and 70.8% for small, medium and large sized enterprises, respectively. Survey results show that most companies comply with state regulations, provide necessary facilities to enhance safety and provide several measures to limit and control hazards. On the negative side, little attention is given to safety training that might be due to the lack of related regulations and follow-up, financial limitations or lack of awareness on the importance of safety training. In addition, results show that ergonomic hazards, noise and hazardous chemicals are largely present. Accident statistics show that medium enterprises have the highest accident cases per enterprise, and chemical industries reported highest total number of accidents per enterprise. The outcomes of this study establish a base for appropriate safety recommendations to enhance the awareness and commitment of companies to appropriate safety rules.

Upgrading safety systems of industrial irradiation facilities

International Nuclear Information System (INIS)

Gomes, R.S.; Gomes, J.D.R.L.; Costa, E.L.C.; Costa, M.L.L.; Thomé, Z.D.

2017-01-01

The first industrial irradiation facility in operation in Brazil was designed in the 70s. Nowadays, twelve commercial and research facilities are in operation and two already decommissioned. Minor modifications and upgrades, as sensors replacement, have been introduced in these facilities, in order to reduce the technological gap in the control and safety systems. The safety systems are designed in agreement with the codes and standards at the time. Since then, new standards, codes and recommendations, as well as lessons learned from accidents, have been issued by various international committees or regulatory bodies. The rapid advance of the industry makes the safety equipment used in the original construction become obsolete. The decreasing demand for these older products means that they are no longer produced, which can make it impossible or costly to obtain spare parts and the expansion of legacy systems to include new features. This work aims to evaluate existing safety systems at Brazilian irradiation facilities, mainly the oldest facilities, taking into account the recommended IAEA's design requirements. Irrespective of the fact that during its operational period no event with victims have been recorded in Brazilian facilities, and that the regulatory inspections do not present any serious deviations regarding the safety procedures, it is necessary an assessment of safety system with the purpose of bringing their systems to 'the state of the art', avoiding their rapid obsolescence. This study has also taken into account the knowledge, concepts and solutions developed to upgrading safety system in irradiation facilities throughout the world. (author)

Upgrading safety systems of industrial irradiation facilities

Energy Technology Data Exchange (ETDEWEB)

Gomes, R.S.; Gomes, J.D.R.L.; Costa, E.L.C.; Costa, M.L.L., E-mail: rogeriog@cnen.gov.br, E-mail: jlopes@cnen.gov.br, E-mail: evaldo@cnen.gov.br, E-mail: mara@cnen.gov.br [Comissão Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil). Diretoria de Radioproteção e Segurança Nuclear; Thomé, Z.D., E-mail: zielithome@gmail.com [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil). Seção de Engenharia Nuclear

2017-07-01

The first industrial irradiation facility in operation in Brazil was designed in the 70s. Nowadays, twelve commercial and research facilities are in operation and two already decommissioned. Minor modifications and upgrades, as sensors replacement, have been introduced in these facilities, in order to reduce the technological gap in the control and safety systems. The safety systems are designed in agreement with the codes and standards at the time. Since then, new standards, codes and recommendations, as well as lessons learned from accidents, have been issued by various international committees or regulatory bodies. The rapid advance of the industry makes the safety equipment used in the original construction become obsolete. The decreasing demand for these older products means that they are no longer produced, which can make it impossible or costly to obtain spare parts and the expansion of legacy systems to include new features. This work aims to evaluate existing safety systems at Brazilian irradiation facilities, mainly the oldest facilities, taking into account the recommended IAEA's design requirements. Irrespective of the fact that during its operational period no event with victims have been recorded in Brazilian facilities, and that the regulatory inspections do not present any serious deviations regarding the safety procedures, it is necessary an assessment of safety system with the purpose of bringing their systems to 'the state of the art', avoiding their rapid obsolescence. This study has also taken into account the knowledge, concepts and solutions developed to upgrading safety system in irradiation facilities throughout the world. (author)

Forklift safety a practical guide to preventing powered industrial truck incidents and injuries

CERN Document Server

Swartz, George

1999-01-01

Written for the more than 1.5 million powered industrial truck operators and supervisors in general industry, as well as those in the construction and marine industries, this Second Edition provides an updated guide to training operators in safety and complying with OSHA's 1999 forklift standard. This edition of Forklift Safety includes a new chapter devoted to the new OSHA 1910.178 standard and new information regarding dock safety, narrow aisle trucks, off-dock incidents, tip-over safety, pallet safety, and carbon monoxide.

Safety of industrial irradiation plants

International Nuclear Information System (INIS)

1992-01-01

Radiation is nowadays used in many applications in industry and medicine; accidental exposure, however, can have grave consequences as large doses of radiation occur in the 600 accelerator or gamma source plants in use around the world. This film explains the operation of irradiation plants and the safety procedures that must be followed to prevent accidents and to ensure safe use

Psychometrics of the AAN Caregiver Driving Safety Questionnaire and contributors to caregiver concern about driving safety in older adults.

Science.gov (United States)

Carvalho, Janessa O; Springate, Beth; Bernier, Rachel A; Davis, Jennifer

2018-03-01

ABSTRACTBackground:The American Academy of Neurology (AAN) updated their practice parameters in the evaluation of driving risk in dementia and developed a Caregiver Driving Safety Questionnaire, detailed in their original manuscript (Iverson Gronseth, Reger, Classen, Dubinsky, & Rizzo, 2010). They described four factors associated with decreased driving ability in dementia patients: history of crashes or citations, informant-reported concerns, reduced mileage, and aggressive driving. An informant-reported AAN Caregiver Driving Safety Questionnaire was designed with these elements, and the current study was the first to explore the factor structure of this questionnaire. Additionally, we examined associations between these factors and cognitive and behavioral measures in patients with mild cognitive impairment or early Alzheimer's disease and their informants. Exploratory factor analysis revealed a four-component structure, consistent with the theory behind the AAN scale composition. These four factor scores also were significantly associated with performance on cognitive screening instruments and informant reported behavioral dysfunction. Regressions revealed that behavioral dysfunction predicted caregiver concerns about driving safety beyond objective patient cognitive dysfunction. In this first known quantitative exploration of the scale, our results support continued use of this scale in office driving safety assessments. Additionally, patient behavioral changes predicted caregiver concerns about driving safety over and above cognitive status, which suggests that caregivers may benefit from psychoeducation about cognitive factors that may negatively impact driving safety.

Design concepts and safety concerns of the small and medium size reactors (SMR)

International Nuclear Information System (INIS)

Seul, Kwang Won; Lee, Jae Hun; Kim, Hho Jung

1998-01-01

The small and medium size reactors (SMR) and interface facilities such as desalination plant are expected to be located near the population area because of restrictions in transporting the plant products such as fresh water to long distance area. To protect the public around the plant facility from the possible release of radioactive materials, the design development of the SMR is focusing on an enhancement of the safety and reliability as well as the economics. In this study, the major safety concepts of the SMR designs significantly different from the current PWR designs are investigated and the safety concerns applicable to the integrated SMR design of Korea (called SMART), were identified. Those safety issues include the use of proven technology, application of strengthening defense in depth, event categorization and selection, simplification of emergency planning, determination of accident source terms and so on. The efforts to resolve the safety concerns in the design stage will provide an improvement of the safety of the SMART design

Safety in times of crises - the importance of industrial emergency plans

International Nuclear Information System (INIS)

Rademacher, H.; Schulten, R.

1989-01-01

Technical and organizational precautions cannot always avoid everyday risks such as accidents, fire, explosions, and other critical situations which without appropriate countermeasures can easily develop into emergencies. While in recent years considerable efforts have been going into improving the technical safety of industrial plants particularly susceptible to accidents (e.g. the nuclear and chemical industry), organizational safety seems to have been neglected. An analysis of different accidents reveals human fallibility rather than technical failures to be causing damage in many cases. Industrial emergency plans are considered to be contributing to the improvement of organizational safety. (orig.) [de

Food Safety Practices in the Egg Products Industry.

Science.gov (United States)

Viator, Catherine L; Cates, Sheryl C; Karns, Shawn A; Muth, Mary K; Noyes, Gary

2016-07-01

We conducted a national census survey of egg product plants (n = 57) to obtain information on the technological and food safety practices of the egg products industry and to assess changes in these practices from 2004 to 2014. The questionnaire asked about operational and sanitation practices, microbiological testing practices, food safety training for employees, other food safety issues, and plant characteristics. The findings suggest that improvements were made in the industry's use of food safety technologies and practices between 2004 and 2014. The percentage of plants using advanced pasteurization technology and an integrated, computerized processing system increased by almost 30 percentage points. Over 90% of plants voluntarily use a written hazard analysis and critical control point (HACCP) plan to address food safety for at least one production step. Further, 90% of plants have management employees who are trained in a written HACCP plan. Most plants (93%) conduct voluntary microbiological testing. The percentage of plants conducting this testing on egg products before pasteurization has increased by almost 30 percentage points since 2004. The survey findings identify strengths and weaknesses in egg product plants' food safety practices and can be used to guide regulatory policymaking and to conduct required regulatory impact analysis of potential regulations.

Long-term criticality safety concerns associated with surplus fissile material disposition

International Nuclear Information System (INIS)

Choi, J.S.

1995-01-01

A substantial inventory of surplus fissile material would result from ongoing and planned dismantlement of US and Russian nuclear weapons. This surplus fissile material could be dispositioned by irradiation in nuclear reactors, and the resulting spent MOx fuel would be similar in radiation characteristics to regular LWR spent UO2 fuel. The surplus fissile material could also be immobilized into high-level waste forms, such as borosilicate glass, synroc, or metal-alloy matrix. The MOx spent fuel, or the immobilized waste forms, could then be directly disposed of in a geologic repository. Long-term criticality safety concerns arise because the fissile contents (i.e., Pu-239 and its decay daughter U-235) in these waste forms are higher than in LWR spent UO2 fuel. MOx spent fuel could contain 3 to 4 wt% of reactor-grade plutonium, compared to only 0.9 wt% of plutonium in LWR spent UO2 fuel. At some future time (tens of thousand of years), when the waste forms had deteriorated due to intruding groundwater, the water could mix with the long-lived fissile materials to form into a critical system. If the critical system is self-sustaining, somewhat like the natural-occurring reactor in OKLO, fission products produced could readily be available for dissolution and release out to the accessible environment, adversely affecting public health and safety. This paper will address ongoing activities to evaluate long-term criticality safety concerns associated with disposition of fissile material in a geologic setting. Issues to be addressed include the identification of a worst-case water-intrusion scenario and waste-form geometries which present the most concern for long-term criticality safety; and suggests of technical solutions for such concerns

77 FR 24722 - Draft Guidance for Industry: Safety of Nanomaterials in Cosmetic Products; Availability

Science.gov (United States)

2012-04-25

...] Draft Guidance for Industry: Safety of Nanomaterials in Cosmetic Products; Availability AGENCY: Food and... safety assessment of nanomaterials in cosmetic products. This guidance is intended to assist industry in... Cosmetic Products.'' The draft guidance is intended to assist industry in identifying the potential safety...

Industry Leader Perceptions of Workplace Safety

Science.gov (United States)

Dunlap, Erik Scott

2009-01-01

This study investigated the perceptions of workplace safety held by industry leaders who were near completion of a Master of Business Administration (MBA) degree. This was a qualitative study that utilized interpretivism as the theoretical framework. The study sought to answer four research questions. (1) How do participants conceptualize…

Safety and Health Perceptions in Work-related Transport Activities in Ghanaian Industries

Directory of Open Access Journals (Sweden)

Charles Atombo

2017-06-01

Conclusion: OSH culture is not fully complied in industries transport activities. This study, therefore, supports the use of safety seminars and training sessions for industry workers responsible for transport operations for better integration of safety standards.

Summary of Tiger Team Assessment and Technical Safety Appraisal recurring concerns in the Operations Area

International Nuclear Information System (INIS)

1993-01-01

Fourteen Tiger Team Assessment and eight Technical Safety Appraisal (TSA) final reports have been received and reviewed by the DOE Training Coordination Program during Fiscal Year 1992. These assessments and appraisals included both reactor and non-reactor nuclear facilities in their reports. The Tiger Team Assessments and TSA reports both used TSA performance objectives, and list ''concerns'' as a result of their findings. However, the TSA reports categorized concerns into the following functional areas: (1) Organization and Administration, (2) Radiation Protection, (3) Nuclear Criticality Safety, (4) Occupational Safety, (5) Engineering/Technical Support, (6) Emergency Preparedness, (7) Safety Assessments, (8) Quality Verification, (9) Fire Protection, (10) Environmental Protection, and (11) Energetic Materials Safety. Although these functional areas match most of the TSA performance objectives, not all of the TSA performance objectives are addressed. For example, the TSA reports did not include Training, Maintenance, and Operations as functional areas. Rather, they included concerns that related to these topics throughout the 11 functional areas identified above. For consistency, the Operations concerns that were identified in each of the TSA report functional areas have been included in this summary with the corresponding TSA performance objective

Companies closely concerned with the mining industry have a training requirement

International Nuclear Information System (INIS)

Grossekemper, H.J.; Schmidt, B.; Schulenberg, F.

1994-01-01

In view of the serious economic situation the future decisions are extremely difficult for some companies closely concerned with the mining industry. The required orientation of the company towards new markets and new products requires not less, but more training and rethinking in all company divisions: from business management via personnel management to plant organisation and from marketing via development to quality assurance. This is proved by practical examples. An analysis by the ''Training'' working group has produced valuable information on the actual training requirement in the North Rhine-Westphalian engineering industry. It has worked out the concrete situation of the companies closely concerned with the mining industry in North Rhine-Westphalia from the point of view of their own training requirements. It is now the task of each individual company to analyse and reflect its concrete situation against the mirror of the results and to base the specific training requirement on the company aim. (orig.)

Safety Climate of Commercial Vehicle Operation

Science.gov (United States)

2010-03-01

Enhancing the safety culture within trucking and motor coach industries has become a key area of concern given the potential impact it has on crashes and overall safety. Many organizations recognize that safety is compromised if the culture within th...

Safety Culture: A Requirement for New Business Models — Lessons Learned from Other High Risk Industries

International Nuclear Information System (INIS)

Kecklund, L.

2016-01-01

Technical development and changes on global markets affects all high risk industries creating opportunities as well as risks related to the achievement of safety and business goals. Changes in legal and regulatory frameworks as well as in market demands create a need for major changes. Several high risk industries are facing a situation where they have to develop new business models. Within the transportation domain, e.g., aviation and railways, there is a growing concern related to how the new business models may affects safety issues. New business models in aviation and railways include extensive use of outsourcing and subcontractors to reduce costs resulting in, e.g., negative changes in working conditions, work hours, employment conditions and high turnover rates. The energy sector also faces pressures to create new business models for transition to renewable energy production to comply with new legal and regulatory requirements and to make best use of new reactor designs. In addition, large scale phase out and decommissioning of nuclear facilities have to be managed by the nuclear industry. Some negative effects of new business models have already arisen within the transportation domain, e.g., the negative effects of extensive outsourcing and subcontractor use. In the railway domain the infrastructure manager is required by European and national regulations to assure that all subcontractors are working according to the requirements in the infrastructure managers SMS (Safety Management System). More than ten levels of subcontracts can be working in a major infrastructure project making the system highly complex and thus difficult to control. In the aviation domain, tightly coupled interacting computer networks supplying airport services, as well as air traffic control, are managed and maintained by several different companies creating numerous interfaces which must be managed by the SMS. There are examples where a business model with several low

LABOUR PROTECTION AND SAFETY IN THE BREWING INDUSTRY

Directory of Open Access Journals (Sweden)

Irina Melnik

2016-10-01

Full Text Available The article describes the quantification of the level of safety in the brewing industry, which allows determining the contribution of each employee to ensure healthy and safe working conditions. Factors have also been shown to affect the safety of each of the employees. Knowledge of the characteristics and limits of each of the factors makes it possible to secure workflow and solve potential problems early. Previously considered a comprehensive approach that allows full control of the security protecting the entire brewing industry. Efficient and safe work is possible only if the working environment at the workplace to meet all the requirements of international standards in the field of occupational safety and health. Therefore, each category from a number of activities, which can significantly reduce the level of injury, and ending with the characteristics of each of the factors for drawing up a plan to ensure the maximum protection of the company's employees, was discussed. Chemical, physical, biological and psychophysical factors may exist alone or in combination with each other. It is therefore important to identify in advance all of them and to take all measures relating to ensure safe working conditions in each of the processes. Separately considered optimal and allowable values of temperature, relative humidity and air velocity in the working area of industrial premises. The parameters were established for the purpose of continuous monitoring in order to ensure comfortable and safe work environment for each employee. In some cases it is necessary to consult with technicians to get the full picture of the possible threats posed by each type of equipment. Especially dangerous in terms of occupational safety and health in the brewing industry is a cooking workshop, where the air temperature in the working area is significantly increased, as well as the bottling plant (noisy.

A multi-agent safety response model in the construction industry.

Science.gov (United States)

Meliá, José L

2015-01-01

The construction industry is one of the sectors with the highest accident rates and the most serious accidents. A multi-agent safety response approach allows a useful diagnostic tool in order to understand factors affecting risk and accidents. The special features of the construction sector can influence the relationships among safety responses along the model of safety influences. The purpose of this paper is to test a model explaining risk and work-related accidents in the construction industry as a result of the safety responses of the organization, the supervisors, the co-workers and the worker. 374 construction employees belonging to 64 small Spanish construction companies working for two main companies participated in the study. Safety responses were measured using a 45-item Likert-type questionnaire. The structure of the measure was analyzed using factor analysis and the model of effects was tested using a structural equation model. Factor analysis clearly identifies the multi-agent safety dimensions hypothesized. The proposed safety response model of work-related accidents, involving construction specific results, showed a good fit. The multi-agent safety response approach to safety climate is a useful framework for the assessment of organizational and behavioral risks in construction.

Risk communication activities toward nuclear safety in Tokai: your safety is our safety

International Nuclear Information System (INIS)

Tsuchiya, T.

2007-01-01

As several decades have passed since the construction of nuclear power plants began, residents have become gradually less interested in nuclear safety. The Tokai criticality accident in 1909, however, had roused residents in Tokai-Mura to realize that they live with nuclear technology risks. To prepare a field of risk communication, the Tokai-Mura C 3 project began as a pilot research project supported by NISA. Alter the project ended, we are continuing risk. communication activities as a non-profit organisation. The most important activity of C 3 project is the citizen's inspection programme for nuclear related facilities. This programme was decided by participants who voluntarily applied to the project. The concept of the citizen's inspection programme is 'not the usual facility tours'. Participants are involved from the planning stage and continue to communicate with workers of the inspected nuclear facility. Since 2003, we have conducted six programmes for five nuclear related organisations. Participants evaluated that radiation protection measures were near good but there were some problems concerning the worker's safety and safety culture, and proposed a mixture of advice based on personal experience. Some advice was accepted and it did improve the facility's safety measures. Other suggestions were not agreed upon by nuclear organisations. The reason lies in the difference of concept between the nuclear expert's 'safety' and the citizen's 'safety'. Residents do not worry about radiation only, but also about the facility's safety as a whole including the worker's safety. They say, 'If the workers are not safe, you also are unable to protect us'. Although the disagreement remained, the participants and the nuclear industry learned much about each other. Participating citizens received a substantial amount of knowledge about the nuclear industry and its safety measures, and feel the credibility and openness of the nuclear industry. On the other hand, the nuclear

Usage of Safety Gloves in the Gold Mining Industry

CSIR Research Space (South Africa)

Scheepers, JCE

1978-10-01

Full Text Available The safety departments of 31 mines were visited, and the data obtained was used to determine to what extent safety gloves were being used in the gold mining industry. The frequency of occurrence of hand injuries amongst black workers of the gold...

Development and validation of a new safety climate scale for petrochemical industries.

Science.gov (United States)

Jafari, Mohammad Javad; Eskandari, Davood; Valipour, Firouz; Mehrabi, Yadollah; Charkhand, Hossein; Mirghotbi, Mostafa

2017-01-01

While a considerable body of research has studied safety climate and its role as a leading indicator of organizational safety, much of this work has been conducted with Western manufacturing samples. The current study puts emphasis on the cross-validation of a safety climate model in the non-Western industrial context of Iranian petrochemical industries. The current study was performed in one petrochemical company in Iran. The scale was developed through conducting a literature review followed by a qualitative study with expert participation. After performing a screening process, the initial number of items on the scale was reduced to 68. Ten dimensions (including management commitment, workers' empowerment, communication, blame culture, safety training, job satisfaction, interpersonal relationship, supervision, continuous improvement, and reward system) together with 37 items were extracted from the exploratory factor analysis (EFA) to measure safety climate. Acceptable ranges of internal consistency statistics for the sub-scales were observed. Confirmatory factor analysis (CFA) confirmed the construct validity of the developed safety climate scale for the petrochemical industry workers. The results of reliability showed that the Cronbach's alpha coefficient for the designed scale was 0.94. The ICC was obtained 0.92. This study created a valid and reliable scale for measuring safety climate in petrochemical industries.

Safety-Culture Exploration in Taiwan’s Metal Industries: Identifying the Workers’ Background Influence on Safety Climate

Directory of Open Access Journals (Sweden)

Shu-Chiang Lin

2017-10-01

Full Text Available The present study aims to assess the safety-climate level in Taiwan’s metal industries, as well as to identify the influence of workers’ backgrounds on the safety climate. An earlier report showed that a poor safety culture was related to the cause of accidents in Taiwan’s traditional manufacturing industries. This study surveyed a total of 839 workers who voluntarily participated and completed the safety-culture questionnaires. These workers were from a Taiwanese metal company and its five satellite companies. Three safety-climate factors, namely safety perception, safety communication and safety-management systems, were assessed. Confirmatory factor analysis (CFA was conducted by developing structural equation modeling to ensure the questionnaire’s validity. The influence of workers’ backgrounds on the safety climate was identified by using one-way ANOVA. The reliability result of the questionnaire was above the acceptable level. The overall safety-climate score was 4.22 out of a five-point scale for safety perception, 4.23 for safety-management systems and 3.97 for safety communication. The scores indicate a good level of safety climate, with room for improvement in safety communication. Additionally, the influence of workers’ backgrounds on the safety climate was confirmed. Based on the validity test, it was also found that the questionnaire could be improved by reconstructing its questions in its development process in order to increase the safety-climate model’s reliability and validity, as well as its model fit.

A study for safety and health management problem of semiconductor industry in Taiwan.

Science.gov (United States)

Chao, Chin-Jung; Wang, Hui-Ming; Feng, Wen-Yang; Tseng, Feng-Yi

2008-12-01

The main purpose of this study is to discuss and explore the safety and health management in semiconductor industry. The researcher practically investigates and interviews the input, process and output of the safety and health management of semiconductor industry by using the questionnaires and the interview method which is developed according to the framework of the OHSAS 18001. The result shows that there are six important factors for the safety and health management in Taiwan semiconductor industry. 1. The company should make employee clearly understand the safety and health laws and standards. 2. The company should make the safety and health management policy known to the public. 3. The company should put emphasis on the pursuance of the safety and health management laws. 4. The company should prevent the accidents. 5. The safety and health message should be communicated sufficiently. 6. The company should consider safety and health norm completely.

Industrial safety in a nuclear decommissioning environment observations and lessons learned

International Nuclear Information System (INIS)

Brevig, D.

2008-01-01

Decommissioning activities present unusual and unexpected workplace safety challenges that go far beyond the traditional experience of nuclear power plant managers. A blend of state-of-the-art safety program management tools along with new and practical applications are required to ensure high industrial safety performance. The demanding and rigorously applied nuclear safety engineering standards that are accepted as normal and routine in the operation of a nuclear power facility, should transform as an industrial safety standard during the non-operating period of decommissioning. In addition, historical measures of non-nuclear industrial safety injury rates would or should not be acceptable safety behaviors during a nuclear decommissioning project. When complex projects, such as the decommissioning of a nuclear generating facility are undertaken, the workforce brings experience, qualifications, and assumptions to the project. The overall multi-year general schedule is developed, with more schedule details, for example, for the nearest rolling 12-18 months. Methods are established for the selection of contractors to assist in areas that are not normal tasks for the facility workforce, whose normal activity is managing and operating a nuclear generating station. However, it is critical to manage those contractors to the agreed work scope to ensure success is maintained by both parties, e.g. the job gets done, on schedule, on budget, all parties are financially whole when the work is complete, and safely. The purpose of this paper is to provide a perspective of nuclear plant personal safety in the ever changing industrial environment created by the demolition of robust and often radiologically contaminated structures in a nuclear facility decommissioning project. (author)

Industrial safety in a nuclear decommissioning environment observations and lessons learned

Energy Technology Data Exchange (ETDEWEB)

Brevig, D. [Independent Consultant, San Clemente (United States)

2008-07-01

Decommissioning activities present unusual and unexpected workplace safety challenges that go far beyond the traditional experience of nuclear power plant managers. A blend of state-of-the-art safety program management tools along with new and practical applications are required to ensure high industrial safety performance. The demanding and rigorously applied nuclear safety engineering standards that are accepted as normal and routine in the operation of a nuclear power facility, should transform as an industrial safety standard during the non-operating period of decommissioning. In addition, historical measures of non-nuclear industrial safety injury rates would or should not be acceptable safety behaviors during a nuclear decommissioning project. When complex projects, such as the decommissioning of a nuclear generating facility are undertaken, the workforce brings experience, qualifications, and assumptions to the project. The overall multi-year general schedule is developed, with more schedule details, for example, for the nearest rolling 12-18 months. Methods are established for the selection of contractors to assist in areas that are not normal tasks for the facility workforce, whose normal activity is managing and operating a nuclear generating station. However, it is critical to manage those contractors to the agreed work scope to ensure success is maintained by both parties, e.g. the job gets done, on schedule, on budget, all parties are financially whole when the work is complete, and safely. The purpose of this paper is to provide a perspective of nuclear plant personal safety in the ever changing industrial environment created by the demolition of robust and often radiologically contaminated structures in a nuclear facility decommissioning project. (author)

Uncertainty in safety : new techniques for the assessment and optimisation of safety in process industry

NARCIS (Netherlands)

Rouvroye, J.L.; Nieuwenhuizen, J.K.; Brombacher, A.C.; Stavrianidis, P.; Spiker, R.Th.E.; Pyatt, D.W.

1995-01-01

At this moment there is no standardised method for the assessment for safety in the process industry. Many companies and institutes use qualitative techniques for safety analysis while other companies and institutes use quantitative techniques. The authors of this paper will compare different

Safety concerns and suggested design approaches to the HTGR Reformer process concept

Energy Technology Data Exchange (ETDEWEB)

Green, R.C.

1981-09-01

This report is a safety review of the High Temperature Gas-Cooled Reactor Reformer Application Study prepared by Gas-Cooled Reactor Associates (GCRA) of La Jolla, California. The objective of this review was to identify safety concerns and suggests design approaches to minimize risk in the High Temperature Gas-Cooled Reactor Reformer (HTGR-R) process concept.

Safety concerns and suggested design approaches to the HTGR Reformer process concept

International Nuclear Information System (INIS)

Green, R.C.

1981-09-01

This report is a safety review of the High Temperature Gas-Cooled Reactor Reformer Application Study prepared by Gas-Cooled Reactor Associates (GCRA) of La Jolla, California. The objective of this review was to identify safety concerns and suggests design approaches to minimize risk in the High Temperature Gas-Cooled Reactor Reformer (HTGR-R) process concept

Industrial hygiene, occupational safety and respiratory symptoms in the Pakistani cotton industry.

Science.gov (United States)

Khan, Abdul Wali; Moshammer, Hanns Michael; Kundi, Michael

2015-04-02

In the cotton industry of Pakistan, 15 million people are employed and exposed to cotton dust, toxic chemicals, noise and physical hazards. The aim of this study was to determine the prevalence of health symptoms, particularly respiratory symptoms, and to measure cotton dust and endotoxin levels in different textile factories of Faisalabad, Pakistan. A cross-sectional investigation was performed in a representative sample of 47 cotton factories in the Faisalabad region in Punjab, Pakistan. Respiratory symptoms of 800 workers were documented by questionnaire. Occupational safety in the factories was assessed by a trained expert following a checklist, and dust and endotoxin levels in different work areas were measured. Prevalence of respiratory disease symptoms (fever, shortness of breath, chest tightness and cough) was generally high and highest in the weaving section of the cotton industry (20-40% depending on symptoms). This section also displayed the poorest occupational safety ratings and the highest levels of inhalable cotton dust (mean±SD 4.6±2.5 vs 0.95±0.65 mg/m(3) in compact units). In contrast, endotoxin levels were highest in the spinning section (median 1521 EU/m(3)), where high humidity is maintained. There are still poor working conditions in the cotton industry in Pakistan where workers are exposed to different occupational hazards. More health symptoms were reported from small weaving factories (power looms). There is a dire need for improvements in occupational health and safety in this industrial sector with particular focus on power looms. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Radiation safety training for industrial irradiators: What are we trying to accomplish?

International Nuclear Information System (INIS)

Smith, M.A.

1998-01-01

Radiation safety training at an industrial irradiator facility takes a different approach than the traditional methods and topics used at other facilities. Where the more routine industrial radiation users focus on standard training topics of contamination control, area surveys, and the traditional dogma of time, distance, and shielding, radiation safety in an industrial irradiation facility must be centered on preventing accidents. Because the primary methods for accomplishing that goal are engineering approaches such as safety system interlocks, training provided to facility personnel should address system operation and emergency actions. This presents challenges in delivering radiation safety training to an audience of varied educational and technical background where little to no commercially available training material specific to this type of operation exists

List of reports from BMFT, CEA, EPRI, JSTA and USNRC concerning reactor safety research

International Nuclear Information System (INIS)

1982-02-01

This list reviews reports from the Federal Republic of Germany, from France from Japan and from the United States of America concerning special problems in the field of reactor safety research. According to the cooperation in the Gesellschaft fuer Reaktorsicherheit (GRS). The list pursues the following order: Country of origin, problem area concerned, according to the Reactor Safety Research Programm of the BMFT, reporting organization. The list of reports appears quarterly. (orig.) [de

Management of health, safety and environment in process industry

DEFF Research Database (Denmark)

Duijm, Nijs Jan; Fiévez, C.; Gerbec, M.

2008-01-01

The present status of industrial HSE management in a number of EU member states is reviewed, with a focus on the integration of health, safety and environment in single management systems. The review provides insight into the standards and paradigms adopted by industry, and it identifies trends...

Responsibility for managing and legal consequences in the field of industrial safety

International Nuclear Information System (INIS)

Buedenbender, U.

1987-01-01

The object of industrial safety is to protect the aspirations, the life and the health of the employee from injury and by accident prevention in the field to combat dangers to life and health. The necessity for industrial safety is just as uncontentious as the objectives pursued by it. There is also a humanitarian connotation here since the health and welfare of employees are of central importance. In addition, economic aspects have to be taken into consideration, for industrial accidents mean unnecessary industrial costs which can have not insignificant economic consequences. Boards of directors, heads of various departments in the hierarchy, also the members of those departments must be absolutely clear as to what are the requirements for industrial safety in detail, what consequences arise for the introduction and organization of industrial processes right through the organization of the enterprise itself and how in this respect responsibilities are to be allocated to those affected. (orig.) [de

Questionnaire responses concerning safety issues in MR examination

International Nuclear Information System (INIS)

Yamaguchi-Sekino, Sachiko; Nakai, Toshiharu; Muranaka, Hiroyuki

2011-01-01

Recently, the rising numbers of medical implants and scanners with higher static magnetic field have increased safety concerns for magnetic resonance (MR) examination. To determine future safety focus, we distributed anonymous questionnaires to 3250 members of the Japanese Society for Magnetic Resonance in Medicine (JSMRM) and received 978 responses. Safety issues on the questionnaire concentrated on the handling of patients with implants (Q7-18, appendix), acoustic trauma due to scanning (Q19-21, appendix), and MR compatibility within the scanner room (Q22-25, appendix). Ninety-three percent of respondents indicated they had encountered cases with implants or medical materials of unknown MR compatibility; 21.7% reported heating problems and 15.0%, nerve stimulation problems, in patients with implants during MR examination. Although 88.7% of respondents recognized the term ''MR compatibility'', 68.2% indicated limited detailed understanding of the term. Eleven percent had had cases with suspected acoustic injury from MR scanner noise. Scanner noise levels were not clarified in any way in 37.4% cases, but 69.5% applied ear protection to patients. Labeling of ''MR compatibility'' of equipment brought into the MR scanner room was reported by 71.9%. More than 50% experienced MR compatibility issues related to equipment brought into the MR scanner room. With regard to safety issues on metallic objects which are implanted in MR workers, 88.1% indicated they would continue current operations even the implant is inside the body. Respondents identified lectures and seminars by professional societies, safety training by manufacturers, and information from the Internet and literature as the 3 main sources for up-dating safety information for MR examination. (author)

Industrial safety and fire protection during the construction phase

International Nuclear Information System (INIS)

Zimmer, K.

1977-01-01

The questions and problems of industrial safety and fire prevention have to be treated like the activities planning, developing, assembly, etc. This statement is illustrated by statistics of the fire insurance companies, from which it can be seen that the number of fire accidents has decreased but that the damage caused has greatly increased. The sooner the fire prevention and industrial safety measures are integrated in the planning phase, the better for the total costs. Preventive measures that possibly have to be introduced at a later stage are not only generally much more expensive but are also seldom as effective. (orig./HK) [de

Decommissioning of Medical, Industrial and Research Facilities. Safety Guide

International Nuclear Information System (INIS)

2010-01-01

Radioactive waste is produced in the generation of nuclear power and the use of radioactive materials in industry, research and medicine. The importance of the safe management of radioactive waste for the protection of human health and the environment has long been recognized, and considerable experience has been gained in this field. The IAEA's Radioactive Waste Safety Standards Programme aimed at establishing a coherent and comprehensive set of principles and requirements for the safe management of waste and formulating the guidelines necessary for their application. This is accomplished within the IAEA Safety Standards Series in an internally consistent set of publications that reflect an international consensus. The publications will provide Member States with a comprehensive series of internationally agreed publications to assist in the derivation of, and to complement, national criteria, standards and practices. The Safety Standards Series consists of three categories of publications: Safety Fundamentals, Safety Requirements and Safety Guides. With respect to the Radioactive Waste Safety Standards Programme, the set of publications is currently undergoing review to ensure a harmonized approach throughout the Safety Standards Series. This Safety Guide addresses the subject of decommissioning of medical, industrial and research facilities where radioactive materials and sources are produced, received, used and stored. It is intended to provide guidance to national authorities and operating organizations, particularly to those in developing countries (as such facilities are predominant in these countries), for the planning and safe management of the decommissioning of such facilities. The Safety Guide has been prepared through a series of Consultants meetings and a Technical Committee meeting

Decommissioning of medical, industrial and research facilities. Safety guide

International Nuclear Information System (INIS)

2005-01-01

Radioactive waste is produced in the generation of nuclear power and the use of radioactive materials in industry, research and medicine. The importance of the safe management of radioactive waste for the protection of human health and the environment has long been recognized, and considerable experience has been gained in this field. The IAEA's Radioactive Waste Safety Standards Programme aimed at establishing a coherent and comprehensive set of principles and requirements for the safe management of waste and formulating the guidelines necessary for their application. This is accomplished within the IAEA Safety Standards Series in an internally consistent set of publications that reflect an international consensus. The publications will provide Member States with a comprehensive series of internationally agreed publications to assist in the derivation of, and to complement, national criteria, standards and practices. The Safety Standards Series consists of three categories of publications: Safety Fundamentals, Safety Requirements and Safety Guides. With respect to the Radioactive Waste Safety Standards Programme, the set of publications is currently undergoing review to ensure a harmonized approach throughout the Safety Standards Series. This Safety Guide addresses the subject of decommissioning of medical, industrial and research facilities where radioactive materials and sources are produced, received, used and stored. It is intended to provide guidance to national authorities and operating organizations, particularly to those in developing countries (as such facilities are predominant in these countries), for the planning and safe management of the decommissioning of such facilities. The Safety Guide has been prepared through a series of Consultants meetings and a Technical Committee meeting

OCCUPATIONAL HEALTH AND SAFETY ISSUES IN VICTORIAN CONSTRUCTION INDUSTRY, AUSTRALIA

OpenAIRE

M. Asad, Abdurrahman

2010-01-01

The construction industry has one of the highest injury ratios of all Australian industries. Individuals employed on the construction industries find themselves confronted with dangerous and life-threatening work conditions. However, it appears that the trend in Occupational Health and Safety (OHS) performance of construction industry has improved consistently compared with the other industries. The enforcement of OHS law and regulation, and the outcome of authority function to assist and pro...

Social media in health--what are the safety concerns for health consumers?

Science.gov (United States)

Lau, Annie Y S; Gabarron, Elia; Fernandez-Luque, Luis; Armayones, Manuel

Recent literature has discussed the unintended consequences of clinical information technologies (IT) on patient safety, yet there has been little discussion about the safety concerns in the area of consumer health IT. This paper presents a range of safety concerns for consumers in social media, with a case study on YouTube. We conducted a scan of abstracts on 'quality criteria' related to YouTube. Five areas regarding the safety of YouTube for consumers were identified: (a) harmful health material targeted at consumers (such as inappropriate marketing of tobacco or direct-to-consumer drug advertising); (b) public display of unhealthy behaviour (such as people displaying self-injury behaviours or hurting others); (c) tainted public health messages (i.e. the rise of negative voices against public health messages); (d) psychological impact from accessing inappropriate, offensive or biased social media content; and (e) using social media to distort policy and research funding agendas. The examples presented should contribute to a better understanding about how to promote a safe consumption and production of social media for consumers, and an evidence-based approach to designing social media interventions for health. The potential harm associated with the use of unsafe social media content on the Internet is a major concern. More empirical and theoretical studies are needed to examine how social media influences consumer health decisions, behaviours and outcomes, and devise ways to deter the dissemination of harmful influences in social media.

Nuclear safety. ICFTU proposals for the international control of the nuclear energy industry

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-07-01

are strong proponents of its use and others have said that they are only prepared to accept its application if safety controls are substantially improved. All affiliates of the ICFTU are convinced that energy policy options must be widened through increased research and development of new and renewable sources and through extensive energy conservation measures. The environmental impact of all methods of energy generation must be assessed on the basis of the public availability of all relevant information. It is in this context, that whatever their views about the desirability or otherwise of nuclear power, all ICFTU affiliates recognise the immediate need to assure the highest possible level of safety for all nuclear plants and activities everywhere - for example to deal with radioactive wastes created over the last 30 years. Even if some countries opt out of nuclear power it is likely that many others will be committed to it for many years. Given the widespread effects of a catastrophic failure anywhere in the world we must therefore all be concerned to strengthen the international safety regime. Because of their historic role in campaigning for health and safety at work, unions are well placed to exercise an independent watchdog role - making use of the knowledge and skills of their members in the nuclear industry - and are also able to speak on behalf of a large membership which is representative representative of the wide public concern about nuclear safety. Immediately following the Chernobyl disaster, the ICFTU Executive Board adopted a resolution (reproduced as Appendix 2 to this document) calling for immediate steps to tighten up nuclear safety. In the light of subsequent developments, the Confederation has now given further detailed consideration to the whole question of nuclear safety and has decided to publish this report which contains detailed proposals for tighter international control of nuclear energy via the International Atomic Energy Agency (IAEA

Nuclear safety. ICFTU proposals for the international control of the nuclear energy industry

International Nuclear Information System (INIS)

1989-01-01

are strong proponents of its use and others have said that they are only prepared to accept its application if safety controls are substantially improved. All affiliates of the ICFTU are convinced that energy policy options must be widened through increased research and development of new and renewable sources and through extensive energy conservation measures. The environmental impact of all methods of energy generation must be assessed on the basis of the public availability of all relevant information. It is in this context, that whatever their views about the desirability or otherwise of nuclear power, all ICFTU affiliates recognise the immediate need to assure the highest possible level of safety for all nuclear plants and activities everywhere - for example to deal with radioactive wastes created over the last 30 years. Even if some countries opt out of nuclear power it is likely that many others will be committed to it for many years. Given the widespread effects of a catastrophic failure anywhere in the world we must therefore all be concerned to strengthen the international safety regime. Because of their historic role in campaigning for health and safety at work, unions are well placed to exercise an independent watchdog role - making use of the knowledge and skills of their members in the nuclear industry - and are also able to speak on behalf of a large membership which is representative representative of the wide public concern about nuclear safety. Immediately following the Chernobyl disaster, the ICFTU Executive Board adopted a resolution (reproduced as Appendix 2 to this document) calling for immediate steps to tighten up nuclear safety. In the light of subsequent developments, the Confederation has now given further detailed consideration to the whole question of nuclear safety and has decided to publish this report which contains detailed proposals for tighter international control of nuclear energy via the International Atomic Energy Agency (IAEA

Perceptions of safety in the workplace

International Nuclear Information System (INIS)

Voelz, G.L.

1980-01-01

The concept of safety in the workplace is changing. Safety First was a slogan generated at a time when life and limb were at significant risk in many industries. Now much more subtle effects, such as late health effects due to industrial exposure and trauma, including mental stress, have become a concern to the safety specialists. Despite the changes in the concepts of safety today, the principles of safety in the workplace remain the same. They are management leadership, procedures, safe work conditions, safety training for supervisors and employees, medical surveillance, and careful accident reporting, investigation and record keeping

Ecological safety of thermal power industry and investments

International Nuclear Information System (INIS)

Glebov, V.P.

1995-01-01

Evaluation of ecological safety of domestic fossil fuel thermal power industry is given in comparison with foreign one. Ways of solving ecological problems are considered. They are based on introduction of new technologies, providing decrease of ecological effect, on development of effective ash-and sulfur-trapping, nitrogen purification equipment, on production of ecologically improved fuel. The necessity of investments to power industry is noted

Behavioral Safety in the Food Services Industry: Challenges and Outcomes

Science.gov (United States)

Lebbon, Angela; Sigurdsson, Sigurdur Oli; Austin, John

2012-01-01

During the course of a 6-year behavioral safety consult at a food and drink industry site, data were collected on the number of Occupational Safety Health Administration (OSHA) recordable incidents, number of lost and restricted days, and number of peer safety observations. Employees were trained to identify safe and unsafe behavior, conduct peer…

LMFBR conceptual design study: an overview of environmental and safety concerns

International Nuclear Information System (INIS)

Brenchley, D.L.

1981-06-01

The US Department of Energy (DOE) initiated the Liquid Metal Fast Breeder (LMFBR) Conceptual Design Study (CDS) with the objective of maintaining a viable breeder option. The project is scheduled to be completed in FY-1981 but decisions regarding plant construction will be delayed until at least 1985. This report provides a review of the potential environmental and safety engineering concerns for the CDS and recommends specific action for the Environmental and Safety Engineering Division of DOE

LMFBR conceptual design study: an overview of environmental and safety concerns

Energy Technology Data Exchange (ETDEWEB)

Brenchley, D.L.

1981-06-01

The US Department of Energy (DOE) initiated the Liquid Metal Fast Breeder (LMFBR) Conceptual Design Study (CDS) with the objective of maintaining a viable breeder option. The project is scheduled to be completed in FY-1981 but decisions regarding plant construction will be delayed until at least 1985. This report provides a review of the potential environmental and safety engineering concerns for the CDS and recommends specific action for the Environmental and Safety Engineering Division of DOE.

Regulatory inspection practices for industrial safety (electrical, mechanical, material handling and conventional aspects)

International Nuclear Information System (INIS)

Agarwal, K.

2017-01-01

Regulatory Inspection (RI) of BARC facilities and projects are carried out under the guidance of BARC Safety Council (BSC) Secretariat. Basically facilities and projects have been divided into two board categories viz. radiological facilities and non-radiological facilities. The Rls of radiological facilities should be carried out under OPSRC and of non-radiological facilities under CFSRC. Periodicity of inspection shall be at least once in a year. The RI of projects is carried out under concerned DSRC. RI practices with industrial safety which includes electrical, mechanical, material handling and conventional aspect for these facilities starts with check lists. The inspection areas are prepared in the form of checklists which includes availability of approved documents, compliance status of previous RIT and various safety committee's recommendations, radiological status of facilities, prompt reporting of safety related unusual occurrences, major incident, site visit for verification of actual status of system/plant. The practices for inspection in the area of electrical safety shall include checking of maintenance procedure for all critical class IV system equipment's such as HT panel, LT panel, transformer and motors. Load testing of Class III system such as D.G. set etc. shall be carried out as technical specification surveillance schedule. Status of aviation lights, number of qualified staff, availability of qualified staff etc. shall be form of inspection

Safety program of the Oak Ridge National Laboratory: a different approach

International Nuclear Information System (INIS)

Burger, G.H.

1981-01-01

The uniqueness and therefore different approach to Oak Ridge National Laboratory's safety program is not a result of elimination of the usual industrial safety organization, but results from the three organizations which supplement it and the areas of safety concerns that they cover. While industrial safety is primarily concerned with day-to-day routine worker activities (wearing of safety glasses and hard hats, adherence to electrical safety work procedures, proper safety lockout and tagout of equipment for maintenance activities, etc.), the other organizations, the Office of Operational Safety, Division Safety Officers and Radiation Control Officers, and the Laboratory director's Review Committees, are concerned with themuch broader spectrum of the total work environment. These organizations are concerned not only with the day-to-day worker activities but the design and conduction of all operations from a process viewpoint. The emphasis of these groups is assuring first that operations, experiments, facilities, etc., are designed properly and then secondly operated properly to assure safety of the operators, Laboratory population, and the public. Responsibilities of the three safety organizations constituting operational or process safety are described and discussed

Preliminary study on improving safety culture in Malaysian nuclear industries

International Nuclear Information System (INIS)

Ibrahim, Sabariah Kader; Lee, Y. E.

2012-01-01

This paper presents preliminary study on safety culture and its implementation in Malaysian nuclear industries by realizing the importance of safety culture; identification of important safety culture attributes; safety culture assessment and the practices to incorporate the identified safety culture attributes in organization. The first section of this paper explains the terms and definitions related to safety culture. Second, for the realization of importance of safety culture in organization, the international operational experiences emphasizing the importance of safety culture are described. Third, important safety culture attributes which are frequently cited in literature are provided. Fourth, methods to assess safety culture in operating organization are described. Finally, the practices to enhance the safety culture in an organization are discussed

Preliminary study on improving safety culture in Malaysian nuclear industries

Energy Technology Data Exchange (ETDEWEB)

Ibrahim, Sabariah Kader [KAIST, Daejeon (Korea, Republic of); Lee, Y. E. [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2012-10-15

This paper presents preliminary study on safety culture and its implementation in Malaysian nuclear industries by realizing the importance of safety culture; identification of important safety culture attributes; safety culture assessment and the practices to incorporate the identified safety culture attributes in organization. The first section of this paper explains the terms and definitions related to safety culture. Second, for the realization of importance of safety culture in organization, the international operational experiences emphasizing the importance of safety culture are described. Third, important safety culture attributes which are frequently cited in literature are provided. Fourth, methods to assess safety culture in operating organization are described. Finally, the practices to enhance the safety culture in an organization are discussed.

Safety and health in the petrochemical industry in Map Ta Phut, Thailand.

Science.gov (United States)

Langkulsen, Uma; Vichit-Vadakan, Nuntavarn; Taptagaporn, Sasitorn

2011-01-01

Petrochemical industries are known as sources of many toxic chemicals. Safety and health risks of the petrochemical workers employed at Map Ta Phut Industrial Estate, located in Rayong, Thailand, are potentially high. The research materials consisted of documents emanating from statutory reports on safety in working with toxic chemicals and the results of interviews by questionnaire among 457 petrochemical workers regarding occupational health and safety issues. Most of workers who were working with toxic chemicals had knowledge and awareness of health risks and chemical hazards at work. We found that safe behavior at work through read the safety information among operational workers less than non-operational workers around 10%. Most of workers had perceived occupational health and safety management in their companies. Some companies revealed that they had not been performing biological monitoring of blood or urine for their health examination reports and that workplace exposure monitoring had not correlated well with health examination of workers. Our study suggested that occupational health and safety for petrochemical industries requires standards and guidelines for workers' health surveillance aimed at protection of workers.

Differing Perceptions Concerning Research Integrity Between Universities and Industry: A Qualitative Study.

Science.gov (United States)

Godecharle, Simon; Nemery, Benoit; Dierickx, Kris

2017-09-14

Despite the ever increasing collaboration between industry and universities, the previous empirical studies on research integrity and misconduct excluded participants of biomedical industry. Hence, there is a lack of empirical data on how research managers and biomedical researchers active in industry perceive the issues of research integrity and misconduct, and whether or not their perspectives differ from those of researchers and research managers active in universities. If various standards concerning research integrity and misconduct are upheld between industry and universities, this might undermine research collaborations. Therefore we performed a qualitative study by conducting 22 semi-structured interviews in order to investigate and compare the perspectives and attitudes concerning the issues of research integrity and misconduct of research managers and biomedical researchers active in industry and universities. Our study showed clear discrepancies between both groups. Diverse strategies in order to manage research misconduct and to stimulate research integrity were observed. Different definitions of research misconduct were given, indicating that similar actions are judged heterogeneously. There were also differences at an individual level, whether the interviewees were active in industry or universities. Overall, the management of research integrity proves to be a difficult exercise, due to many diverse perspectives on several essential elements connected to research integrity and misconduct. A management policy that is not in line with the vision of the biomedical researchers and research managers is at risk of being inefficient.

Safety Performance Index Industri Batik Tulis Berdasarkan Kriteria Majemuk

Directory of Open Access Journals (Sweden)

Nachnul Ansori

2015-12-01

Full Text Available Accident generally occurs due to the activities which is done in unsafe conditions or even unsafe behavior. These conditions can influence workers productivity. In batik industries, those workers use toxic material and work in non ergonomic atmosphere. Moreover, they also do not take care of the environment and do not use personal protective equipments (PPE. Workers at Madura batik SMEs have not fully realized the significance of occupational health and safety (OHS in their working areas. The aims of this research is to evaluate OHS performance based on the indicators of safety performance index (SPI, which is multicriteria, in that industri. The safety performance attributes were obtained from factor analysis from the previous study. The index is calculated based on the weighted evaluation results of critical behavior checklist (CBC, integrated with analytical hierarchy process (AHP. As the results, we should give priority to improve the knowledge and experience toward OHS of the workers and also improve the working environment of the Madura’s batik industries. Additionally, the performance of OHS in coloring process is also on the threshold of unsafe condition, further development on the coloring process is needed.

Safety climate and safety behaviors in the construction industry: The importance of co-workers commitment to safety.

Science.gov (United States)

Schwatka, Natalie V; Rosecrance, John C

2016-06-16

There is growing empirical evidence that as safety climate improves work site safety practice improve. Safety climate is often measured by asking workers about their perceptions of management commitment to safety. However, it is less common to include perceptions of their co-workers commitment to safety. While the involvement of management in safety is essential, working with co-workers who value and prioritize safety may be just as important. To evaluate a concept of safety climate that focuses on top management, supervisors and co-workers commitment to safety, which is relatively new and untested in the United States construction industry. Survey data was collected from a cohort of 300 unionized construction workers in the United States. The significance of direct and indirect (mediation) effects among safety climate and safety behavior factors were evaluated via structural equation modeling. Results indicated that safety climate was associated with safety behaviors on the job. More specifically, perceptions of co-workers commitment to safety was a mediator between both management commitment to safety climate factors and safety behaviors. These results support workplace health and safety interventions that build and sustain safety climate and a commitment to safety amongst work teams.

Project for the completion of a probabilistic safety analysis of an industrial irradiation

International Nuclear Information System (INIS)

Ferro, R.; Troncoso, M.

1995-01-01

The probabilistic safety analysis is a very valuable instrument in safety studies of facilities with potential risk for the personnel, population and environment. One of the possible field of use of PSA techniques in the safety studies for industrial irradiation where serious accidents have occurred. For this reason a project has been undertaken to carry out the PSA in the Irradiation Plant of Research Institute of the Food Industry, which complements the safety studies of this facility

Hazard and safety in the nuclear industry

International Nuclear Information System (INIS)

Tadmor, J.

1978-01-01

Although the number of victims in the nuclear industry has been extremely low as compared with the number of victims in other spheres of human activity society has been willing to put up with a high number of accidents resulting in few victims per accident but refuses to accept an extremely rare accident resulting in a high number of victims. The U.S. nuclear industry is spending almost 2000 dollars for each reduction of a man x rem unit and this investment raises the ''man-life value'' in the nuclear industry to 10 million dollars as compared with 10,000 to 20,000 dollars spent in other activities (roentgen, early cancer detection, etc.). To reduce the exaggerated burden placed on the nuclear industry the safety expenditures should be spread over a maximum possible range of human activities. (B.G.)

Maturing safety in the UK

International Nuclear Information System (INIS)

Debenham, A.; Kovan, D.

1994-01-01

AEA Technology provides UK nuclear industry with technical services and R+D support, concentrating on plant performance, safety and environmental issues. Today, safety has a new set of priorities, reflected by a more demanding regulatory regime which takes account of concerns such as human factors, severe accidents, risks during plant outages, the need for improving safety culture, etc

75 FR 14609 - Commercial Fishing Industry Vessel Safety Advisory Committee; Vacancies

Science.gov (United States)

2010-03-26

... which Chapter 45 of Title 46, U.S.C. applies and persons representing the marine insurance industry... Industry Vessel Safety Advisory Committee; Vacancies AGENCY: Coast Guard, DHS. ACTION: Request for applications. SUMMARY: The Coast Guard seeks applications for membership on the Commercial Fishing Industry...

"We can't get along without each other": Qualitative interviews with physicians about device industry representatives, conflict of interest and patient safety.

Directory of Open Access Journals (Sweden)

Anna R Gagliardi

Full Text Available Physician relationships with device industry representatives have not been previously assessed. This study explored interactions with device industry representatives among physicians who use implantable cardiovascular and orthopedic devices to identify whether conflict of interest (COI is a concern and how it is managed.A descriptive qualitative approach was used. Physicians who implant orthopedic and cardiovascular devices were identified in publicly available directories and web sites, and interviewed about their relationships with device industry representatives. Sampling was concurrent with data collection and analysis. Data were analyzed and discussed using constant comparative technique by all members of the research team.Twenty-two physicians (10 cardiovascular, 12 orthopedic were interviewed. Ten distinct representative roles were identified: purchasing, training, trouble-shooting, supplying devices, assisting with device assembly and insertion, supporting operating room staff, mitigating liability, conveying information about recalls, and providing direct and indirect financial support. Participants recognized the potential for COI but representatives were present for the majority of implantations. Participants revealed a tension between physicians and representatives that was characterized as "symbiotic", but required physicians to be vigilant about COI and patient safety, particularly because representatives varied regarding disclosure of device defects. They described a concurrent tension between hospitals, whose policies and business practices were focused on cost-control, and physicians who were required to comply with those policies and use particular devices despite concerns about their safety and effectiveness.Given the potential for COI and threats to patient safety, further research is needed to establish the clinical implications of the role of, and relationship with device industry representatives; and whether and how

Considerations concerning the reliability of reactor safety equipment

International Nuclear Information System (INIS)

Furet, J.; Guyot, Ch.

1967-01-01

A review is made of the circumstances which favor a good collection of maintenance data at the C.E.A. The large amount of data to be treated has made necessary the use of a computer for analyzing automatically the results collected. Here, only particular aspects of the reliability from the point of view of the electronics used for nuclear reactor control will be dealt with: sale and unsafe failures; probability of survival (in the case of reactor safety); availability. The general diagrams of the safety assemblies which have been drawn up for two types of reactor (power reactor and low power experimental reactor) are given. Results are presented of reliability analysis which could be applied to the use of functional modular elements, developed industrially in France. Improvement of this reliability appears to be fairly limited by an increase in the redundancy; on the other hand it is shown how it may be very markedly improved by the use of automatic tests with different frequencies for detecting unsafe failures rates of measurements for the sub-assemblies and for the logic sub-assemblies. Finally examples are given to show the incidence of the complexity and of the use of different technologies in reactor safety equipment on the reliability. (authors) [fr

Risk and safety in the nuclear industry and conventional norms of society

International Nuclear Information System (INIS)

Tadmor, J.

1977-01-01

The societal acceptance of various risks is analyzed and rules of risk acceptance as a function of different parameters (e. g., expected benefit, intensity of effect) are spelled out. The monetary value of a human life is estimated, based on investments in safety of different human activities. The acceptable risks and safety investments in different human activities are then compared with risks and safety investments of the nuclear industry. Safety investments required to reduce radioactivity releases and risks from nuclear power stations to ALAP (as low as practiable) levels are taken as a study case. It is found that risks in the nuclear industry are several orders of magnitude lower and safety investments per human life saved are several orders of magnitude higher, as compared with risks and safety investments in other human activities

Applying the behaviour grid for improving safety in industrial environments

NARCIS (Netherlands)

Boer, de J. (Johannes); Heylen, D. (Dirk); Teeuw, W.B. (Wouter)

2013-01-01

The Saxion University of Applied Sciences recently started its “Safety at Work” project. Its objective is to increase safety in the workplace by combining and applying state-of-the-art factors from Ambient Intelligence, Industrial & Product Design and Smart Materials [1].The human

Order no. 53/71 of 3 February 1971 - Approval of the General Regulations on Health and Safety at Work in Industrial Establishments

International Nuclear Information System (INIS)

1971-01-01

This Order approves the General Regulations for Health and Safety at Work in Industrial Establishments. Section V which concerns ionizing radiations lays down that radiation protection measures currently in force must be observed in all premises where radioactive substances are stored, handled or used and where devices producing ionizing radiations are operated. (NEA) [fr

Hydrogen Technologies Safety Guide

Energy Technology Data Exchange (ETDEWEB)

Rivkin, C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Burgess, R. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Buttner, W. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2015-01-01

The purpose of this guide is to provide basic background information on hydrogen technologies. It is intended to provide project developers, code officials, and other interested parties the background information to be able to put hydrogen safety in context. For example, code officials reviewing permit applications for hydrogen projects will get an understanding of the industrial history of hydrogen, basic safety concerns, and safety requirements.

Industrial safety and applied health physics. Annual report for 1977

International Nuclear Information System (INIS)

Auxier, J.A.; Davis, D.M.

1978-06-01

Progress is reported on the following: radiation monitoring with regard to personnel monitoring and health physics instrumentation; environs surveillance with regard to atmospheric monitoring, water monitoring, radiation background measurements, and soil and grass samples; radiation and safety surveys with regard to laboratory operations monitoring, radiation incidents, and laundry monitoring; industrial safety and special projects with regard to accident analysis, disabling injuries, and safety awards

A Program Applying Professional Safety Basics in Construction Projects

Directory of Open Access Journals (Sweden)

Entisar Kadhim Rasheed

2016-04-01

Full Text Available When industrial and constructional renaissance started in the world, the great interest was going on towards the equipment’s, which was the first mean for production. After industry was settled the interest was going on towards the men ship which manpower on which the production depends. It was approved that it represents the basic part in all of the processes and the protection of those individuals against dangers of these equipment’s, industry and its accidents was the basic things which was studied in many researches until it crystallized in general principles for all industries and other take care in each industry. The professional safety is concerned as restrict which aims to take care of humanitarian and material principles also to raise the production of these principles, in the aspect of safety, health and providing the suitable healthy condition to the worker so he can feel safety, confidence and sociological settle, this will increase the production. So In order to maintain the manpower of business risks and to enable them to fulfill their role better to increase production and improve the quality and maintain the machine and supporting the national economy and keep pace with industrial developments and technological came the idea of research to focus on the importance of studying the subject of occupational safety by conducting a field survey to see the reality of professional safety in the relevant departments and work sites and through a questionnaire on the subject and conduct personal interviews with those concerned in this area and to prepare a program for the application of professional safety for each resource (labor, machines, materials, money in construction sites and departments concerned.

Factors Contribute to Safety Culture in the Manufacturing Industry in Malaysia

OpenAIRE

Ong Choon Hee

2014-01-01

The purpose of this paper is to explain the role of safety culture in the manufacturing industry in Malaysia and identify factors contribute to safety culture. It is suggested in this study that leadership support, management commitment and safety management system are important factors that contribute to safety culture. This study also provides theoretical implications to guide future research and offers practical implications to the managers in the development of safety culture. Given that ...

Safety sans Frontières: An International Safety Culture Model.

Science.gov (United States)

Reader, Tom W; Noort, Mark C; Shorrock, Steven; Kirwan, Barry

2015-05-01

The management of safety culture in international and culturally diverse organizations is a concern for many high-risk industries. Yet, research has primarily developed models of safety culture within Western countries, and there is a need to extend investigations of safety culture to global environments. We examined (i) whether safety culture can be reliably measured within a single industry operating across different cultural environments, and (ii) if there is an association between safety culture and national culture. The psychometric properties of a safety culture model developed for the air traffic management (ATM) industry were examined in 17 European countries from four culturally distinct regions of Europe (North, East, South, West). Participants were ATM operational staff (n = 5,176) and management staff (n = 1,230). Through employing multigroup confirmatory factor analysis, good psychometric properties of the model were established. This demonstrates, for the first time, that when safety culture models are tailored to a specific industry, they can operate consistently across national boundaries and occupational groups. Additionally, safety culture scores at both regional and national levels were associated with country-level data on Hofstede's five national culture dimensions (collectivism, power distance, uncertainty avoidance, masculinity, and long-term orientation). MANOVAs indicated safety culture to be most positive in Northern Europe, less so in Western and Eastern Europe, and least positive in Southern Europe. This indicates that national cultural traits may influence the development of organizational safety culture, with significant implications for safety culture theory and practice. © 2015 Society for Risk Analysis.

Statement on safety requirements concerning the long-term operation of the Muehleberg nuclear power station

International Nuclear Information System (INIS)

2012-12-01

This report published by the Swiss Federal Nuclear Safety Inspectorate ENSI investigates the safety requirements with respect to the long-term operation of the Muehleberg nuclear power station in Switzerland. Relevant international requirements and Swiss legal stipulations concerning the long-term operation of the power station are stated. The management of aging processes is looked at. The regular verification of the integrity of various plant components such as containments, piping, steam generation system, etc. is looked at in detail. The state-of-the-art concerning deterministic accident analyses and refitting technology are discussed, as are automated safety systems. The applicable laws, decrees and guidelines are listed in appendices

Evaluation model for safety capacity of chemical industrial park based on acceptable regional risk

Institute of Scientific and Technical Information of China (English)

Guohua Chen; Shukun Wang; Xiaoqun Tan

2015-01-01

The paper defines the Safety Capacity of Chemical Industrial Park (SCCIP) from the perspective of acceptable regional risk. For the purpose of exploring the evaluation model for the SCCIP, a method based on quantitative risk assessment was adopted for evaluating transport risk and to confirm reasonable safety transport capacity of chemical industrial park, and then by combining with the safety storage capacity, a SCCIP evaluation model was put forward. The SCCIP was decided by the smaller one between the largest safety storage capacity and the maximum safety transport capacity, or else, the regional risk of the park will exceed the acceptable level. The developed method was applied to a chemical industrial park in Guangdong province to obtain the maximum safety transport capacity and the SCCIP. The results can be realized in the regional risk control of the park effectively.

Concerns for Skills Shortages in the 21st Century: A Review into the Construction Industry, Australia

Directory of Open Access Journals (Sweden)

Michelle Watson

2012-11-01

Full Text Available The Australian Construction Industry is now facing skills shortages in all trades. As an industry focused on the skill of its workforce, there is now concern the Australian standard in quality, workmanship, and productivity will inhibit both at national and international level.This research paper addresses the underlying, influential factors concerning skills shortages in the Australian construction industry. The influential factors addressed include funding, training statistics, employer expectations, financial limitations, Industrial Relations and immigration. Given the reference to skills shortages within the industry, and documented in related literature, if skills shortages are to continue to exist, their effect will impact upon the overall performance of construction companies throughout Australia.

Radiation safety in Australia's mineral sands industry

International Nuclear Information System (INIS)

Hughes, W.

1989-06-01

This brochure is part of a training package aiming to explain in simple terms what radiation is, how it affects people's lives and how, in the specific case of the mineral sand industry, the risk of ill-effects from low-level radioactivity could be effectively guarded against by simple and easily followed safety precautions. ills

Industry based performance indicators for nuclear power plants

International Nuclear Information System (INIS)

Connelly, E.M.; Van Hemel, S.B.; Haas, P.M.

1990-07-01

This report presents the results of the first phase of a two-phase study, performed with the goal of developing indirect (leading) indicators of nuclear power plant safety, using other industries as a model. It was hypothesized that other industries with similar public safety concerns could serve as analogs to the nuclear power industry. Many process industries have many more years of operating experience, and many more plants than the nuclear power industry, and thus should have accumulated much useful safety data. In Phase 1, the investigators screened a variety of potential industry analogs and chose the chemical/petrochemical manufacturing industry as the primary analog for further study. Information was gathered on safety programs and indicators in the chemical industry, as well as in the nuclear power industry. Frameworks were selected for the development of indicators which could be transferred from the chemical to the nuclear power environment, and candidate sets of direct and indirect safety indicators were developed. Estimates were made of the availability and quality of data in the chemical industry, and plans were developed for further investigating and testing these candidate indicators against safety data in both the chemical and nuclear power industries in Phase 2. 38 refs., 4 figs., 7 tabs

Organisation of work safety in the mining industry; Sicherheitsorganisation im Bergbau

Energy Technology Data Exchange (ETDEWEB)

Didier, V. [Bergbau-Berufsgenossenschaft, Bochum (Germany). Referat Unfallverhuetung

1999-10-07

The paper summarizes the main findings of a scientific study. Accident figures for the German mining industry indicate that, in comparison with other industries, there is still plenty of scope for increased prevention. However, the rapid development of safety technology alone is still yielding diminishing returns. The main route to increased safety in the mining industry is by way of improved safety management. Various methods are available for analyzing the efficiency of work-safety structures and procedures. Models for the classification of safety-relevant tasks are based on the legally appropriate and organisationally expedient allocation of responsibilities between management and safety experts. An important management tool in this respect is the hazard analysis procedure laid down in the European Union's Health and Safety at Work Act. Practical studies are used to illustrate that safety results can be improved through reorganisation without increasing prime costs. (orig.) [German] Der Beitrag fasst die wesentlichen Ergebnisse einer wissenschaftlichen Studie zusammen: Die Unfallentwicklung im deutschen Bergbau zeigt im Vergleich zu anderen Industriezweigen noch deutliche Reserven fuer die Praevention. Die Fortentwicklung der Sicherheitstechnik fuer sich allein liefert aber nur noch abnehmende Grenzertraege. Eine Strategie technischer und organisatorischer Einzeldirektiven reicht ebenfalls nicht aus. Der Weg zu besseren Sicherheitsresultaten im Bergbau fuehrt vor allem ueber optimierte Ablaeufe des Sicherheitsmanagements. Mit verschiedenen Methoden lassen sich Aufbau- und Ablauforganisation der Arbeitssicherheit auf ihre Effizienz untersuchen. Aus der juristisch implizierten und organisatorisch zweckmaessigen Aufgabenteilung zwischen Fuehrungskraeften und Sicherheitsexperten ergeben sich Zurodnungsmuster fuer sicherheitsrelevante Aufgaben. Ein wichtiges Fuehrungsinstrument sind Gefaehrdungsanalysen nach dem Arbeitsschutzrecht der Europaeischen Union. Anhand

Control of Industrial Safety Based on Dynamic Characteristics of a Safety Budget-Industrial Accident Rate Model in Republic of Korea

Directory of Open Access Journals (Sweden)

Gi Heung Choi

2017-06-01

Conclusion: A simple feedback control with proportional–integral action is effective in prevention of industrial accidents. Securing a lower level of elastic industrial accident-driving energy appears to have dominant effects on the control performance compared with the damping effort to dissipate such energy. More attention needs to be directed towards physical and social feedbacks that have prolonged cumulative effects. Suggestions for further improvement of the safety system including physical and social feedbacks are also made.

Nuclear safety. Concerns about the nuclear power reactors in Cuba

International Nuclear Information System (INIS)

Wells, Jim; Aloise, Gene; Flaherty, Thomas J.; Fitzgerald, Duane; Zavala, Mario; Hayward, Mary Alice

1992-09-01

the atmosphere, contains defective welds. Another said that reactor operator trainees have received training on inadequate reactor simulators. In contrast, a representative of the Cuban government told us that Cuba wants to build its reactor in accordance with safety standards. Also, according to information provided to us by a representative of the Russian government, Cuba's reactor has been constructed according to safety rules that take into account, among other things, the possible impacts of an earthquake. State Department, NRC, and DOE officials have expressed a number of concerns about the construction and operation of Cuba's nuclear power reactors. According to State Department officials, the United States maintains a comprehensive embargo on any U.S. transactions with Cuba and discourages other countries from providing assistance, except for safety purposes, to Cuba's nuclear power program. The United States would prefer that the construction of the reactors never be completed and wants Cuba to sign the Non-Proliferation Treaty or the Treaty of Tlatelolco, both of which bind signatories to blanket nonproliferation commitments for their entire nuclear program, before the United States considers reversing its policy of discouraging other countries from assisting Cuba with the construction of the reactors. The United States has asked Russia to cease providing any nuclear assistance until Cuba has signed either treaty. NRC officials are aware of, but could not verify, the Cuban emigres' allegations of safety deficiencies because available information was limited. They said, however, that if the allegations were true, the cited deficiencies could affect the safety of the reactors operation. In addition, they expressed concern about the ability of Cuba's industrial infrastructure to support the nuclear power reactors, the lack of a regulatory structure, the adequacy of training for reactor operators, the quality of the civil construction, and the design of the

Evaluation of safety practices and performance in a brewery industry ...

African Journals Online (AJOL)

Evaluation of safety practices and performance in a brewery industry in Nigeria between 2000 – 2007. ... Journal of Applied Sciences and Environmental Management ... The study revealed that a total of 156 accidents were prevented in the period of the safety programme which translates to an average of 19.45 per year.

Testing laboratories, its function in ensuring industrial safety

International Nuclear Information System (INIS)

Sanchez Fernandez, M.

2015-01-01

This article discusses and justifies the development of industrial laboratories (testing and calibration) in Spain, since its embryo, its creation and development, to the present day. Likewise, presents its interrelation with other agents, as well as the legislative and technical framework is application along to the years. Within this development of the sector, highlights the period of the conformity assessment, and consequently its relationship with Industrial safety. Finally, describes the organizational situation of the sector both nationally and internationally. (Author)

EMPLOYEE PERCEPTIONS OF OCCUPATIONAL HEALTH AND SAFETY STANDARDS IN THE STEEL INDUSTRY

Directory of Open Access Journals (Sweden)

J. Mojapelo

2016-07-01

Full Text Available The inability to follow occupational health and safety standards typically resultsin accidents that place severe financial burdens on both employees as well asorganisations. The aim of this studyis to explore the perceptionsof employees inthe steel industry towards occupational health and safety standards in the steelindustry in South Africa. A survey was conducted in which a structuredquestionnaire was distributed to a purposive sample of 165 employees employedby a largesteel processing company in Gauteng Province. The collected data wereanalysed using SPSS (Version 22.0. A combination of descriptive statistics andanalysis of mean scores was applied to meet the aim of the study. The resultsreveal that employees in the steel industry perceived that occupational health andsafety standards were satisfactory in all seven occupational health and safetydimensions considered in this study. These are (1 information and training, (2health and safety awareness, (3 employee behaviour (4 role of the supervisor, (5health and safety reporting mechanisms, (6 workplace inspection, and (7workplace environment. Among these dimensions, safety awareness emerged asthe most important dimension to employees. The results may be utilised bymanagers in the steel industry to identify and direct their attention to the keyoccupational health and safety factors in their different contexts.

Safety, economic incentives and insurance in the Norwegian petroleum industry

International Nuclear Information System (INIS)

Osmundsen, Petter; Aven, Terje; Erik Vinnem, Jan

2008-01-01

There is an increased use of key performance indicators and incentive schemes in the petroleum industry. Applying modern incentive theory, we explore what implications this management trend has for injury and major accident prevention efforts and safety. Can economic incentives be designed for accident prevention activities? In cases where this is not possible, what are the challenges for the safety efforts? In particular, how are safety efforts affected by enhanced economic incentives for other performance dimensions like production and rate of return? Can safety be neglected? What remedies are available?

The promotion of work safety. A continuous task for the Swiss gas industry

International Nuclear Information System (INIS)

Luescher, H.J.

1993-01-01

The modern Western European population values the work safety very highly because of ethical and economical reasons. In Switzerland too, safety at work is actively promoted. Based on national legislation and on the SGWA-Association Statutes, the Swiss Gas Industry, with great engagement, promotes the measures for accident prevention. Following a general introduction into the legislative basis, possible ways and means for the promotion of safety at work are described. Subsequently, the concrete activities of the Gas Supply Authorities and the SGWA are pointed out, followed by a description of the future work-safety programmes of the Swiss Gas Industry. (orig.) [de

Process Control Systems in the Chemical Industry: Safety vs. Security

Energy Technology Data Exchange (ETDEWEB)

Jeffrey Hahn; Thomas Anderson

2005-04-01

Traditionally, the primary focus of the chemical industry has been safety and productivity. However, recent threats to our nation’s critical infrastructure have prompted a tightening of security measures across many different industry sectors. Reducing vulnerabilities of control systems against physical and cyber attack is necessary to ensure the safety, security and effective functioning of these systems. The U.S. Department of Homeland Security has developed a strategy to secure these vulnerabilities. Crucial to this strategy is the Control Systems Security and Test Center (CSSTC) established to test and analyze control systems equipment. In addition, the CSSTC promotes a proactive, collaborative approach to increase industry's awareness of standards, products and processes that can enhance the security of control systems. This paper outlines measures that can be taken to enhance the cybersecurity of process control systems in the chemical sector.

A health and safety survey of Irish funeral industry workers.

LENUS (Irish Health Repository)

Kelly, N

2012-02-01

BACKGROUND: Those handling deceased individuals, including the funeral industry, face a variety of health and safety hazards including occupationally acquired infectious disease. AIMS: To identify the knowledge, attitudes and beliefs of Irish funeral industry workers towards occupational hazards and infectious disease in 2009. METHODS: The sample analysed consisted of all listed member premises of the Irish Association of Funeral Directors as at 1 July 2009. A postal survey was sent to each premises in July 2009, with two rounds of follow-up reviews sent to non-responders. Four main areas were covered--occupational hazards, embalming, industry expertise and demographics. The quantitative and qualitative results were analysed to assess knowledge, attitudes and beliefs. Data collection was completed on 31 December 2009. RESULTS: Two hundred and thirty listed member premises were contacted. Twenty-two were unsuitable for the survey. One hundred and thirty-eight valid replies were received from 130 premises, representing a premises response rate of 63% (130\\/208). Seventy-three premises (56%) identified themselves as embalmers. Embalmers had variable vaccine uptake and variable knowledge, attitude and beliefs towards embalming those with blood-borne viruses. Fifteen per cent of respondents reported a work-related injury, back injury being the most common. Splash and sharps injuries were reported as a work-related injury, and infections believed to be work related were also reported. CONCLUSIONS: This study demonstrates widespread occupational health concerns among this professional group. It confirms the need for occupational health advice and services. There is also a strong desire for regulation of this profession in Ireland.

Safety concerns us all

CERN Multimedia

SC/GS/S

2004-01-01

In spite of periodic safety inspections, risks can never be entirely excluded. The Safety Commission invites you to inform your supervisor or Territorial Safety Officer (TSO) of any hazardous situations you may be aware of. Actions to be taken following the fall of two windowpanes A few weeks ago, a windowpane fell from the third floor of an office building, causing minor damage to a car parked outside. No one was hurt in the incident. The putty holding the window in place had gradually deteriorated over time, and strong winds undoubtedly triggered the incident. A few weeks later, a sudden draft caused a window on the fifth floor of the same building to shatter and fall to the ground below. No one was hurt and there was no material damage. The incident was caused by a fan set into the opening window: as the window slammed shut, the weight of the fan caused the glass to break. What can we do to improve safety? examine the windows of our offices and workshops and report any problems or faults, such as dam...

Improvement And Development Of The Motivation System In The Occupational And Industrial Safety Field

Science.gov (United States)

Pavlov, Arkhip; Gavrilov, Dmitrij

2017-11-01

This paper discusses one of the main problems in labour and industrial management in the occupational and industrial safety field - motivation to work safely. The problem is complex and should be solved by a set of measures, where the assignment of responsibility to employees for the results of their work is absent, including in the field of labour protection and industrial safety. In accordance with the obligatory management principles, employees' work resolves to the strict implementation of the actions prescribed by the regulations. The responsibility for the negative result rests with the person who enacted or instructs employees. Thus, the employee is practically exempt from responsibility for the final result. One of the possible solutions to this problem is to put an assignment of responsibility on the employees for the results of their activities also in the occupational and industrial safety field. This is illustrated by the experience of other states, particularly of Australia. In conclusion suggestions for improvement and development of the motivation system in the field of occupational and industrial safety.

Improvement And Development Of The Motivation System In The Occupational And Industrial Safety Field

Directory of Open Access Journals (Sweden)

Pavlov Arkhip

2017-01-01

Full Text Available This paper discusses one of the main problems in labour and industrial management in the occupational and industrial safety field - motivation to work safely. The problem is complex and should be solved by a set of measures, where the assignment of responsibility to employees for the results of their work is absent, including in the field of labour protection and industrial safety. In accordance with the obligatory management principles, employees' work resolves to the strict implementation of the actions prescribed by the regulations. The responsibility for the negative result rests with the person who enacted or instructs employees. Thus, the employee is practically exempt from responsibility for the final result. One of the possible solutions to this problem is to put an assignment of responsibility on the employees for the results of their activities also in the occupational and industrial safety field. This is illustrated by the experience of other states, particularly of Australia. In conclusion suggestions for improvement and development of the motivation system in the field of occupational and industrial safety.

Promoting safety culture in radiation industry through radiation audit

International Nuclear Information System (INIS)

Noriah, M.A.

2007-01-01

This paper illustrates the Malaysian experience in implementing and promoting effective radiation safety program. Current management practice demands that an organization inculcate culture of safety in preventing radiation hazard. The aforementioned objectives of radiation protection can only be met when it is implemented and evaluated continuously. Commitment from the workforce to treat safety as a priority and the ability to turn a requirement into a practical language is also important to implement radiation safety policy efficiently. Maintaining and improving safety culture is a continuous process. There is a need to establish a program to measure, review and audit health and safety performance against predetermined standards. This program is known as radiation safety audit and is able to reveal where and when action is needed to make improvements to the systems of controls. A structured and proper radiation self-auditing system is seen as the sole requirement to meet the current and future needs in sustainability of radiation safety. As a result safety culture, which has been a vital element on safety in many industries can be improved and promote changes, leading to good safety performance and excellence. (author)

Study of whole effluent acute toxicity test (Daphnia magna as an evaluation of Ministry of Environment and Forestry Decree No. 3 In 2014 concerning industrial performance rank in environmental management

Directory of Open Access Journals (Sweden)

Rohmah Neng

2018-01-01

Full Text Available Only 15% of the industries in Citarum Watershed, specifically in Bandung Regency, West Bandung Regency, Sumedang Regency, Bandung City and Cimahi City, are registered as PROPER industries. They must comply to indicators as set in the Minister of Environment and Forestry Decree No. 3 In 2014 concerning Industrial Performance Rank in Environmental Management, as a requirement to apply for PROPER. Wastewater treatment and management, referencing to Minister of Environment and Forestry Decree No. 5 In 2014 concerning Wastewater Effluent Standards, must be performed to be registered as PROPER industries. Conducting only physical-chemical parameter monitoring of wastewater is insufficient to determine the safety of wastewater discharged into the river, therefore additional toxicity tests involving bioindicator are required to determine acute toxicity characteristic of wastewater. The acute toxicity test quantifies LC50 value based on death response of bioindicators from certain dosage. Daphnia magna was used as bioindicator in the toxicity test and probit software for analysis. In 2015-2016, the number of industries that discharged wastewater exceeding the standard was found greater in non-PROPER industries than in PROPER industries. Based on the toxicity level, both PROPER and non-PROPER industries have toxic properties, however PROPER industries of 2015-2016 is more toxic with LC5096 value reaching 2.79%.

Sustainability in the UK construction minerals industry

OpenAIRE

Mitchell, Clive

2015-01-01

Sustainability in the UK construction minerals industry Clive Mitchell, Industrial Minerals Specialist, British Geological Survey, Nottingham, UK Email: Sustainability is not just about environmental protection it also concerns biodiversity, community relations, competence, employment, geodiversity, health and safety, resource efficiency, restoration and stakeholder accountability. The UK construction minerals industry aims to supply essential materials in a sustainabl...

An overview of applications and radiation safety aspects of linear accelerators in Brazilian industry

International Nuclear Information System (INIS)

Lourenco, M.J.M.; Silva, F.C.A. da

2002-01-01

This work presents a brief description of the situation of Brazilian Regulatory Authority about safety control on Industrial Linear Accelerators Installations. It shows the national regulatory infrastructure responsible for radiation safety inspections, the regulation infrastructure, the national inventory of industrial installations, the national system of inspection and enforcement and the national system for qualifying the radiation protection officer. Some results of regulatory safety inspections are also showed in this work. (author)

Safety, training focus of combined organization

Energy Technology Data Exchange (ETDEWEB)

Toop, L.

2006-03-15

This article presented details of Enform, a company that coordinates safety programs and training for new employees in the oil and gas industry. Enform was created when the Petroleum Industry Training Services merged with the Canadian Petroleum Safety Council. The aim of Enform is to ensure continuous improvements in health and safety within the industry by reducing working injuries and promoting health and safety practices. The companies merged to eliminate duplication of services and allow associates further opportunities for advanced training. In 2005, Enform trained an estimated 155,000 students, and a number of new courses were introduced and updated. A franchise program was extended and a training council was formed to offer direction and guidance to the oil industry. Enform focuses on sharing information among companies, as well as working to harmonize safety regulations across provincial borders. A task force was recently created by the company with a specific focus on drug and alcohol abuse. Other concerns include driver safety and driver interactions with wildlife. Enform is mainly focused on the traditional oil industry, and has had little entry into the oil sands industry. It was concluded that increased activity in the oil and gas industry will remain Enform's biggest challenge in the next few years. Plans for Enform's increased involvement in the offshore oil and gas industry were also discussed. 4 figs.

Survey of Safety Climate in a Petrochemical Industry in Mahshahr

Directory of Open Access Journals (Sweden)

Y. Shokoohi

2012-07-01

Results and Discussion: Average score of the industry's safety climate was obtained 5.9. Of 17 studied dimensions, 9 dimensions were weak (score less than 6. Lowest score were related to Event & Accident and Change management dimensions. Highest score were related to Individual priorities and need for safety (8.65. Generally relationship between individual variables (ages, work experience, education and safety climate were not significant (P>0.05. Conclusion: Generally one can conclude that individual variables such as age, education and experience have not significant effect on safety climate. It seems that top management forms the organizational climate and consequently safety climate. It reaffirms the basic principle of senior management commitment to safety and its role in preventing accidents. Thus safety climate can be used as a good method for assessing Occupational Health and Safety Management Performance.

Industrial Personal Computer based Display for Nuclear Safety System

International Nuclear Information System (INIS)

Kim, Ji Hyeon; Kim, Aram; Jo, Jung Hee; Kim, Ki Beom; Cheon, Sung Hyun; Cho, Joo Hyun; Sohn, Se Do; Baek, Seung Min

2014-01-01

The safety display of nuclear system has been classified as important to safety (SIL:Safety Integrity Level 3). These days the regulatory agencies are imposing more strict safety requirements for digital safety display system. To satisfy these requirements, it is necessary to develop a safety-critical (SIL 4) grade safety display system. This paper proposes industrial personal computer based safety display system with safety grade operating system and safety grade display methods. The description consists of three parts, the background, the safety requirements and the proposed safety display system design. The hardware platform is designed using commercially available off-the-shelf processor board with back plane bus. The operating system is customized for nuclear safety display application. The display unit is designed adopting two improvement features, i.e., one is to provide two separate processors for main computer and display device using serial communication, and the other is to use Digital Visual Interface between main computer and display device. In this case the main computer uses minimized graphic functions for safety display. The display design is at the conceptual phase, and there are several open areas to be concreted for a solid system. The main purpose of this paper is to describe and suggest a methodology to develop a safety-critical display system and the descriptions are focused on the safety requirement point of view

Industrial Personal Computer based Display for Nuclear Safety System

Energy Technology Data Exchange (ETDEWEB)

Kim, Ji Hyeon; Kim, Aram; Jo, Jung Hee; Kim, Ki Beom; Cheon, Sung Hyun; Cho, Joo Hyun; Sohn, Se Do; Baek, Seung Min [KEPCO, Youngin (Korea, Republic of)

2014-08-15

The safety display of nuclear system has been classified as important to safety (SIL:Safety Integrity Level 3). These days the regulatory agencies are imposing more strict safety requirements for digital safety display system. To satisfy these requirements, it is necessary to develop a safety-critical (SIL 4) grade safety display system. This paper proposes industrial personal computer based safety display system with safety grade operating system and safety grade display methods. The description consists of three parts, the background, the safety requirements and the proposed safety display system design. The hardware platform is designed using commercially available off-the-shelf processor board with back plane bus. The operating system is customized for nuclear safety display application. The display unit is designed adopting two improvement features, i.e., one is to provide two separate processors for main computer and display device using serial communication, and the other is to use Digital Visual Interface between main computer and display device. In this case the main computer uses minimized graphic functions for safety display. The display design is at the conceptual phase, and there are several open areas to be concreted for a solid system. The main purpose of this paper is to describe and suggest a methodology to develop a safety-critical display system and the descriptions are focused on the safety requirement point of view.

Design of safety mechanism for an industrial manipulator based on passive compliance

International Nuclear Information System (INIS)

Kim, Hwi Su; Park, Jung Jun; Song, Jae Bok; Kyung, Jin Ho

2010-01-01

In recent years, collision safety between humans and robots has drawn much attention since human-robot cooperation is increasingly needed in various fields. Since positioning accuracy and collision safety are both important, an industrial manipulator should maintain very high stiffness for positioning accuracy in a normal situation, but exhibit very low stiffness when subjected to a collision force greater than the tolerance for human injury. To satisfy these requirements, we proposed in our previous research a safety mechanism composed of a linear spring and a double-slider mechanism for a service robot with a small payload. We modified this device to meet more stringent requirements for an industrial manipulator which usually has a payload higher than a service robot. Several experiments on static and dynamic collisions showed high stiffness of the safety mechanism in response to an external torque that was less than a predetermined threshold torque, but low stiffness that enabled absorption of the collision force when the external torque exceeded the threshold. Thus, positioning accuracy and collision safety were improved using the proposed design. Furthermore, a new safety criterion is suggested to verify the collision safety of a manipulator that uses the proposed safety mechanism

Engineering Hematopoietic Cells for Cancer Immunotherapy: Strategies to Address Safety and Toxicity Concerns.

Science.gov (United States)

Resetca, Diana; Neschadim, Anton; Medin, Jeffrey A

2016-09-01

Advances in cancer immunotherapies utilizing engineered hematopoietic cells have recently generated significant clinical successes. Of great promise are immunotherapies based on chimeric antigen receptor-engineered T (CAR-T) cells that are targeted toward malignant cells expressing defined tumor-associated antigens. CAR-T cells harness the effector function of the adaptive arm of the immune system and redirect it against cancer cells, overcoming the major challenges of immunotherapy, such as breaking tolerance to self-antigens and beating cancer immune system-evasion mechanisms. In early clinical trials, CAR-T cell-based therapies achieved complete and durable responses in a significant proportion of patients. Despite clinical successes and given the side effect profiles of immunotherapies based on engineered cells, potential concerns with the safety and toxicity of various therapeutic modalities remain. We discuss the concerns associated with the safety and stability of the gene delivery vehicles for cell engineering and with toxicities due to off-target and on-target, off-tumor effector functions of the engineered cells. We then overview the various strategies aimed at improving the safety of and resolving toxicities associated with cell-based immunotherapies. Integrating failsafe switches based on different suicide gene therapy systems into engineered cells engenders promising strategies toward ensuring the safety of cancer immunotherapies in the clinic.

MANAGEMENT PROCESS OF HEALTH AND SAFETY RISK IN THE NIGERIA CONSTRUCTION INDUSTRY

OpenAIRE

Akwu, Ifeoma Claris

2017-01-01

The study examined the state of health and safety risk management practices in the building sector of the construction industry with the objective to examine the health and safety risk management processes adopted by the construction industry in Nigeria; the study adopted the survey and case study research design. It employed the use of Delphi’s technique in the distribution of questionnaire and made use of chi-square analytical technique for the analysis of gathered data. The findings reveal...

LABOUR PROTECTION AND INDUSTRIAL SAFETY IN UKRAINE: PROBLEMS OF TRANSITION PERIOD AND PERSPECTIVE WAYS OF DEVELOPMENT

Directory of Open Access Journals (Sweden)

A. P. BOCHKOVSKY

2016-12-01

Full Text Available Based on comparative analysis of the industrial accident causes in Ukraine and EU countries this article establishes that the main accident reasons are organizational ones (50 to 70% of the total number of cases, however such indicators as the registered in Ukraine fatal cases frequency coefficient (per 1 thousand of employees and the fatal accidents-total accidents number ratio are greater than the similar indicators in Europe by about 2- and 100-fold, respectively. It is noted that the issues of improving the work safety in Ukraine towards the association with the European Union should be considered in the context of two main planes, which are associated with changes in the legislative and educational systems. Within this article, the authors analyse the main inter-sectoral and sectoral regulatory legal acts on labour protection, in particular in the field of providing for fire, explosion and electrical safety, and relevant documents relating to the creation and maintenance of a comfortable environment at work. Based on the conducted analysis, the problems of adapting the national legislation in the field of labour protection and industrial safety to the legal framework of EU, the problems concerning the unsystematic character and selective approach to the implementation of appropriate changes, and potential hazards that can occur at all stages of the life cycle of technical systems in the event of their introduction are determined. The main differences in the systematic approach to the professional training of students in higher educational institutions (HEI of Ukraine and EU countries (Poland, for example in the field of labour protection and industrial safety are singled out. It is noted that in the Republic of Poland numbering the population correlative with Ukraine the quantity of special educational institutions preparing specialists in the field of labour protection in relation to the total number of higher educational establishment is

Safety Criteria for the Private Spaceflight Industry

Science.gov (United States)

Quinn, Andy; Maropoulos, Paul

2010-09-01

The Federal Aviation Administration(FAA) Office of Commercial Space Transportation(AST) has set specific rules and generic guidelines to cover experimental and operational flights by industry forerunners such as Virgin Galactic and XCOR. One such guideline Advisory Circular(AC) 437.55-1[1] contains exemplar hazard analyses for spacecraft designers and operators to follow under an experimental permit. The FAA’s rules and guidelines have also been ratified in a report to the United States Congress, Analysis of Human Space Flight Safety[2] which cites that the industry is too immature and has ‘insufficient data’ to be proscriptive and that ‘defining a minimum set of criteria for human spaceflight service providers is potentially problematic’ in order not to ‘stifle the emerging industry’. The authors of this paper acknowledge the immaturity of the industry and discuss the problematic issues that Design Organisations and Operators now face.

Implications of passive safety based on historical industrial experience

International Nuclear Information System (INIS)

Forsberg, C.W.

1988-01-01

In the past decade, there have been multiple proposals for applying different technologies to achieve passively safe light water reactors (LWRs). A key question for all such concepts is, ''What are the gains in safety, costs, and reliability for passive safety systems.'' Using several types of historical data, estimates have been made of gains from passive safety and operating systems, which are independent of technology. Proposals for passive safety in reactors usually have three characteristics: (1) Passive systems with no moving mechanical parts, (2) systems with far fewer components and (3) more stringent design criteria for safety-related and process systems. Each characteristic reduces the potential for an accident and may increase plant reliability. This paper addresses gains from items (1) and (2). Passive systems often allow adoption of more rigorous design criteria which would be either impossible or economically unfeasible for active systems. This important characteristic of passive safety systems cannot be easily addressed using historical industrial experience

A Nuclear Safety System based on Industrial Computer

International Nuclear Information System (INIS)

Kim, Ji Hyeon; Oh, Do Young; Lee, Nam Hoon; Kim, Chang Ho; Kim, Jae Hack

2011-01-01

The Plant Protection System(PPS), a nuclear safety Instrumentation and Control (I and C) system for Nuclear Power Plants(NPPs), generates reactor trip on abnormal reactor condition. The Core Protection Calculator System (CPCS) is a safety system that generates and transmits the channel trip signal to the PPS on an abnormal condition. Currently, these systems are designed on the Programmable Logic Controller(PLC) based system and it is necessary to consider a new system platform to adapt simpler system configuration and improved software development process. The CPCS was the first implementation using a micro computer in a nuclear power plant safety protection system in 1980 which have been deployed in Ulchin units 3,4,5,6 and Younggwang units 3,4,5,6. The CPCS software was developed in the Concurrent Micro5 minicomputer using assembly language and embedded into the Concurrent 3205 computer. Following the micro computer based CPCS, PLC based Common-Q platform has been used for the ShinKori/ShinWolsong units 1,2 PPS and CPCS, and the POSAFE-Q PLC platform is used for the ShinUlchin units 1,2 PPS and CPCS. In developing the next generation safety system platform, several factors (e.g., hardware/software reliability, flexibility, licensibility and industrial support) can be considered. This paper suggests an Industrial Computer(IC) based protection system that can be developed with improved flexibility without losing system reliability. The IC based system has the advantage of a simple system configuration with optimized processor boards because of improved processor performance and unlimited interoperability between the target system and development system that use commercial CASE tools. This paper presents the background to selecting the IC based system with a case study design of the CPCS. Eventually, this kind of platform can be used for nuclear power plant safety systems like the PPS, CPCS, Qualified Indication and Alarm . Pami(QIAS-P), and Engineering Safety

A Nuclear Safety System based on Industrial Computer

Energy Technology Data Exchange (ETDEWEB)

Kim, Ji Hyeon; Oh, Do Young; Lee, Nam Hoon; Kim, Chang Ho; Kim, Jae Hack [Korea Electric Power Corporation Engineering and Construction, Daejeon (Korea, Republic of)

2011-05-15

The Plant Protection System(PPS), a nuclear safety Instrumentation and Control (I and C) system for Nuclear Power Plants(NPPs), generates reactor trip on abnormal reactor condition. The Core Protection Calculator System (CPCS) is a safety system that generates and transmits the channel trip signal to the PPS on an abnormal condition. Currently, these systems are designed on the Programmable Logic Controller(PLC) based system and it is necessary to consider a new system platform to adapt simpler system configuration and improved software development process. The CPCS was the first implementation using a micro computer in a nuclear power plant safety protection system in 1980 which have been deployed in Ulchin units 3,4,5,6 and Younggwang units 3,4,5,6. The CPCS software was developed in the Concurrent Micro5 minicomputer using assembly language and embedded into the Concurrent 3205 computer. Following the micro computer based CPCS, PLC based Common-Q platform has been used for the ShinKori/ShinWolsong units 1,2 PPS and CPCS, and the POSAFE-Q PLC platform is used for the ShinUlchin units 1,2 PPS and CPCS. In developing the next generation safety system platform, several factors (e.g., hardware/software reliability, flexibility, licensibility and industrial support) can be considered. This paper suggests an Industrial Computer(IC) based protection system that can be developed with improved flexibility without losing system reliability. The IC based system has the advantage of a simple system configuration with optimized processor boards because of improved processor performance and unlimited interoperability between the target system and development system that use commercial CASE tools. This paper presents the background to selecting the IC based system with a case study design of the CPCS. Eventually, this kind of platform can be used for nuclear power plant safety systems like the PPS, CPCS, Qualified Indication and Alarm . Pami(QIAS-P), and Engineering Safety

Impact of individual resilience and safety climate on safety performance and psychological stress of construction workers: A case study of the Ontario construction industry.

Science.gov (United States)

Chen, Yuting; McCabe, Brenda; Hyatt, Douglas

2017-06-01

The construction industry has hit a plateau in terms of safety performance. Safety climate is regarded as a leading indicator of safety performance; however, relatively little safety climate research has been done in the Canadian construction industry. Safety climate may be geographically sensitive, thus it is necessary to examine how the construct of safety climate is defined and used to improve safety performance in different regions. On the other hand, more and more attention has been paid to job related stress in the construction industry. Previous research proposed that individual resilience may be associated with a better safety performance and may help employees manage stress. Unfortunately, few empirical research studies have examined this hypothesis. This paper aims to examine the role of safety climate and individual resilience in safety performance and job stress in the Canadian construction industry. The research was based on 837 surveys collected in Ontario between June 2015 and June 2016. Structural equation modeling (SEM) techniques were used to explore the impact of individual resilience and safety climate on physical safety outcomes and on psychological stress among construction workers. The results show that safety climate not only affected construction workers' safety performance but also indirectly affected their psychological stress. In addition, it was found that individual resilience had a direct negative impact on psychological stress but had no impact on physical safety outcomes. These findings highlight the roles of both organizational and individual factors in individual safety performance and in psychological well-being. Construction organizations need to not only monitor employees' safety performance, but also to assess their employees' psychological well-being. Promoting a positive safety climate together with developing training programs focusing on improving employees' psychological health - especially post-trauma psychological

Safety concerns for superconducting magnets of upcoming fusion experiments

International Nuclear Information System (INIS)

Turner, L.R.

1983-01-01

-Several fusion experiments being constructed (Tore Supra) or contemplated (DCT 8, Alcator DCT) feature superconducting coils. These coils introduce the following safety concerns: 1. Internally Cooled Conductor (ICC). ICC's are found to be highly stable against short heat pulses, even when the coolant is stagnant or moving at low steady-state velocity. However, a large heat pulse is certain to quench the conductor. Thus, determining the stability limits is vital. 2. Helium II Cooling. Helium II has both unique advantages as a coolant and unique safety problems. 3. Shorted Turns. In magnets with shorts from operational accidents, the current can switch back and forth between the short and the shorted turns, as those alternatively go normal and superconducting. 4. Hybrid Superconducting-Normal Conducting Coil System. The possibility of unequal currents in the different magnets and thus of unexpected forces on the superconducting magnets is much greater than for an all-superconducting system. Analysis of these problems are presented

The Impact of Occupational Safety on Logistics and Automation in Industrial Plants

OpenAIRE

Botti, Lucia

2017-01-01

Research on workplace health and safety analyses the integration of work practices with safety, health and wealth of people at work. The aim of occupational safety is to realize a safe and health work environment, eliminating or reducing the risks for workers' safety and health. The objective of this thesis is the study, integration, development and application of innovative approaches and models for decision-making support in the context of occupational safety in industrial plants and lo...

Multilevel Safety Climate and Safety Performance in the Construction Industry: Development and Validation of a Top-Down Mechanism

Directory of Open Access Journals (Sweden)

Ran Gao

2016-11-01

Full Text Available The character of construction projects exposes front-line workers to dangers and accidents. Safety climate has been confirmed to be a predictor of safety performance in the construction industry. This study aims to explore the underlying mechanisms of the relationship between multilevel safety climate and safety performance. An integrated model was developed to study how particular safety climate factors of one level affect those of other levels, and then affect safety performance from the top down. A questionnaire survey was administered on six construction sites in Vietnam. A total of 1030 valid questionnaires were collected from this survey. Approximately half of the data were used to conduct exploratory factor analysis (EFA and the remaining data were submitted to structural equation modeling (SEM. Top management commitment (TMC and supervisors’ expectation (SE were identified as factors to represent organizational safety climate (OSC and supervisor safety climate (SSC, respectively, and coworkers’ caring and communication (CCC and coworkers’ role models (CRM were identified as factors to denote coworker safety climate (CSC. SEM results show that OSC factor is positively related to SSC factor and CSC factors significantly. SSC factor could partially mediate the relationship between OSC factor and CSC factors, as well as the relationship between OSC factor and safety performance. CSC factors partially mediate the relationship between OSC factor and safety performance, and the relationship between SSC factor and safety performance. The findings imply that a positive safety culture should be established both at the organizational level and the group level. Efforts from all top management, supervisors, and coworkers should be provided to improve safety performance in the construction industry.

Multilevel Safety Climate and Safety Performance in the Construction Industry: Development and Validation of a Top-Down Mechanism.

Science.gov (United States)

Gao, Ran; Chan, Albert P C; Utama, Wahyudi P; Zahoor, Hafiz

2016-11-08

The character of construction projects exposes front-line workers to dangers and accidents. Safety climate has been confirmed to be a predictor of safety performance in the construction industry. This study aims to explore the underlying mechanisms of the relationship between multilevel safety climate and safety performance. An integrated model was developed to study how particular safety climate factors of one level affect those of other levels, and then affect safety performance from the top down. A questionnaire survey was administered on six construction sites in Vietnam. A total of 1030 valid questionnaires were collected from this survey. Approximately half of the data were used to conduct exploratory factor analysis (EFA) and the remaining data were submitted to structural equation modeling (SEM). Top management commitment (TMC) and supervisors' expectation (SE) were identified as factors to represent organizational safety climate (OSC) and supervisor safety climate (SSC), respectively, and coworkers' caring and communication (CCC) and coworkers' role models (CRM) were identified as factors to denote coworker safety climate (CSC). SEM results show that OSC factor is positively related to SSC factor and CSC factors significantly. SSC factor could partially mediate the relationship between OSC factor and CSC factors, as well as the relationship between OSC factor and safety performance. CSC factors partially mediate the relationship between OSC factor and safety performance, and the relationship between SSC factor and safety performance. The findings imply that a positive safety culture should be established both at the organizational level and the group level. Efforts from all top management, supervisors, and coworkers should be provided to improve safety performance in the construction industry.

Software Reliability Issues Concerning Large and Safety Critical Software Systems

Science.gov (United States)

Kamel, Khaled; Brown, Barbara

1996-01-01

This research was undertaken to provide NASA with a survey of state-of-the-art techniques using in industrial and academia to provide safe, reliable, and maintainable software to drive large systems. Such systems must match the complexity and strict safety requirements of NASA's shuttle system. In particular, the Launch Processing System (LPS) is being considered for replacement. The LPS is responsible for monitoring and commanding the shuttle during test, repair, and launch phases. NASA built this system in the 1970's using mostly hardware techniques to provide for increased reliability, but it did so often using custom-built equipment, which has not been able to keep up with current technologies. This report surveys the major techniques used in industry and academia to ensure reliability in large and critical computer systems.

Safety Politics and Risk Perceptions in Malaysian Industry

DEFF Research Database (Denmark)

Wangel, Arne

Abstract The book deals with the analysis of work hazards and safety in industrial enterprises in Peninsular Malaysia, Southeast Asia. It traces the development of this theme of conflict within the context constituted by state, labour market and labour-management relations in Malaysia. The book...... and safety, when compared with the influence of local conditions? What kind of process develops, as local theory about work hazards are formed among workers. And, which are the opportunities for changing working environment institutions in Malaysia? The first part of the book discusses traditions...... by the state from Burawoy, Beronius, and Adesina about production politics and social relations in the labour process provides an integrated perspective on individual risk perceptions, safety practices in enterprises, and government regulation. The empirical data were collected during the period 1989...

Argentine regulatory experience concerning radiation protection in industrial gammagraphy

International Nuclear Information System (INIS)

Ermacora, Marcela G.

2005-01-01

Industrial gammagraphy has always been responsible for the highest rates of radiological incidents in almost every part of the world. This is mainly due to the high activities of the radioactive sources used, which are constantly transported in the equipment that contains them between the storage and the areas of work, and is also due to workload pressures which may induce to negligence in following the operational procedures, if a strong Safety Culture does not exist. The purpose of this paper is to present the main aspects of the Argentine Regulations relating to radiation protection to control this practice and to contribute in this way to reduce the associated risks. In addition, some incidents occurred in Argentina during the latest years, the causes that led to those events and their relation to the in observance of the regulations in force, their consequences and the measures taken to repair them are described. Finally, the importance of the role that education and training has in the strengthening of Safety Culture, key element of all undertaking, is highlighted. (author) [es

Reporter Concerns in 300 Mode-Related Incident Reports from NASA's Aviation Safety Reporting System

Science.gov (United States)

McGreevy, Michael W.

1996-01-01

A model has been developed which represents prominent reporter concerns expressed in the narratives of 300 mode-related incident reports from NASA's Aviation Safety Reporting System (ASRS). The model objectively quantifies the structure of concerns which persist across situations and reporters. These concerns are described and illustrated using verbatim sentences from the original narratives. Report accession numbers are included with each sentence so that concerns can be traced back to the original reports. The results also include an inventory of mode names mentioned in the narratives, and a comparison of individual and joint concerns. The method is based on a proximity-weighted co-occurrence metric and object-oriented complexity reduction.

List of reports concerning reactor safety research from BMFT, CEA, EPRI, JSTA, and USNRC

International Nuclear Information System (INIS)

1982-12-01

This list reviews reports from the Federal Republic of Germany, from France, from Japan and from the United States of America concerning special problems in the field of Reactor Safety Research. According to the cooperation of the Bundesminister fuer Forschung und Technologie (BMFT) with the Commissariat a l'Energie Atomique (CEA), the Japan Science and Technologie Agency (JSTA), the Electric Power Research Institute (EPRI) and the United States Nuclear Regulatory Commission, these Reports are available in the Gesellschaft fuer Reaktorsicherheit (GRS). The list pursues the following order: Country of origin, problem area concerned, according to the Reactor Safety Research Programm of the BMFT, reporting organization. The list of reports appears quarterly. (orig./HP) [de

Instilling safety culture in the passenger rail transport industry within the South African context

Directory of Open Access Journals (Sweden)

Khulumane (John Maluleke

2013-07-01

Full Text Available South Africa has two major rail operators that constitute the rail transport industry. These are Transnet Freight Rail (TFR, which operates freight and the Passenger Rail Agency of South Africa (PRASA. Although the Railway Safety Regulator (2011:29 reported the year on year declining trend of collisions, the main concern is that the costs incurred for each year’s incidents is escalating. This article is concerned with the declining safety standards of these operators as evidenced by 742 collisions recorded during the 2011/2012 financial year for both operators. The focus is mainly on collisions during the movement of rolling stock within the PRASA environment. The analysis of the occurrences is narrowed down, with the emphasis on the province of Gauteng. In the analysis of the causes of these collisions, the problems that led to the root causes of these collisions is reported. Of critical importance is that every transport operator is faced with the challenges of how to effectively respond to the basic transport needs and requirements of the travelling public. The transport users’ need is to travel between the two geographical points. During the journey between these geographical points, the operator has safety and security requirements and must provide a reliable, accessible and affordable transport system. As the travelling public becomes more affluent, the transport needs become open ended and require much more rational public choices. The rail transport system remains a vital or indispensable business sector of the economy. By investing in new technology, rolling stock and infrastructure, we woud see an increase in innovation, competitiveness, and an elevated standard of living.

Safety culture in the Finnish and Swedish nuclear industries - history and present

Energy Technology Data Exchange (ETDEWEB)

Reiman, T.; Pietikaeinen, E. (Technical Research Centre of Finland, VTT (Finland)); Kahlbom, U. (RiskPilot AB (Sweden)); Rollenhagen, C. (Royal Institute of Technology (KTH) (Sweden))

2010-03-15

The report presents results from an interview study that examined the characteristics of the Nordic nuclear branch safety culture. The study also tested the theoretical model of safety culture developed by the authors. The interview data was collected in Sweden (n = 14) and Finland (n = 16). Interviewees represented the major actors in the nuclear field (regulators, power companies, expert organizations, waste management organizations). The study gave insight into the nature of safety culture in the nuclear industry. It provided an overview on the variety of factors that people in the industry consider important for safety. The respondents rather coherently saw such psychological states as motivation, mindfulness, sense of control, understanding of hazards and safety and sense of responsibility as important for nuclear safety. Some of the respondents described a certain Nordic orientation towards safety. One characteristic was a sense of personal responsibility for safety. However, there was no clear agreement on the existence of a shared Nordic nuclear safety culture. Sweden and Finland were seen different for example in the way the co-operation between plants and nuclear safety authorities was arranged and re-search activities organized. There were also perceived differences in the way everyday activities like decision making were carried out in the organizations. There are multiple explanations for the differences. The industry in Sweden has been driven by the strong supplier. In Finland the regulator's role in shaping the culture has been more active. Other factors creating differences are e.g. national culture and company culture and the type of the power plant. Co-operation between Nordic nuclear power organizations was viewed valuable yet challenging from safety point of view. The report concludes that a good safety culture requires a deep and wide under-standing of nuclear safety including the various accident mechanisms of the power plants as well as

Safety culture in the Finnish and Swedish nuclear industries - history and present

International Nuclear Information System (INIS)

Reiman, T.; Pietikaeinen, E.; Kahlbom, U.; Rollenhagen, C.

2010-03-01

The report presents results from an interview study that examined the characteristics of the Nordic nuclear branch safety culture. The study also tested the theoretical model of safety culture developed by the authors. The interview data was collected in Sweden (n = 14) and Finland (n = 16). Interviewees represented the major actors in the nuclear field (regulators, power companies, expert organizations, waste management organizations). The study gave insight into the nature of safety culture in the nuclear industry. It provided an overview on the variety of factors that people in the industry consider important for safety. The respondents rather coherently saw such psychological states as motivation, mindfulness, sense of control, understanding of hazards and safety and sense of responsibility as important for nuclear safety. Some of the respondents described a certain Nordic orientation towards safety. One characteristic was a sense of personal responsibility for safety. However, there was no clear agreement on the existence of a shared Nordic nuclear safety culture. Sweden and Finland were seen different for example in the way the co-operation between plants and nuclear safety authorities was arranged and re-search activities organized. There were also perceived differences in the way everyday activities like decision making were carried out in the organizations. There are multiple explanations for the differences. The industry in Sweden has been driven by the strong supplier. In Finland the regulator's role in shaping the culture has been more active. Other factors creating differences are e.g. national culture and company culture and the type of the power plant. Co-operation between Nordic nuclear power organizations was viewed valuable yet challenging from safety point of view. The report concludes that a good safety culture requires a deep and wide under-standing of nuclear safety including the various accident mechanisms of the power plants as well as a

Transactions of the Twentieth Water Reactor Safety Information Meeting

International Nuclear Information System (INIS)

Weiss, A.J.

1992-10-01

This report contains summaries of papers on reactor safety research to be presented at the 20th Water Reactor Safety Information Meeting at the Bethesda Marriott Hotel in Bethesda, Maryland, October 21--23, 1992. The summaries briefly describe the programs and results of nuclear safety research sponsored by the Office of Nuclear Regulatory Research, USNRC. Summaries of invited papers concerning nuclear safety issues from US government laboratories, the electric utilities, the Electric Power Research Institute (EPRI), the nuclear industry, and from foreign governments and industry are also included

Modernization of safety system for the radiation facility for industrial sterilization

International Nuclear Information System (INIS)

Drndarevic, V.; Djuric, D.; Koturovic, A.; Arandjelovic, M.; Mikic, R.

1995-01-01

Modernization of the existing safety system of the radiation facility for industrial sterilization at the Vinca Institute of nuclear science is done. In order to improve radiation safety of the facility, the latest recommendations and requirements of IAEA have been implemented. Concept and design of the modernized system are presented. The new elements of the safety system are described and the improvements achieved by means of this modernization are pointed out. (author)

Risk and safety in the nuclear industry and conventional norms of society

International Nuclear Information System (INIS)

Tadmor, J.

In the present study the societal acceptance of various risks is analyzed and rules of risk acceptance as a function of different parameters are spelled out. The monetary value of a human life is estimated, based on investments in safety of different human activities. The acceptable risks and safety investments in different human activities are then compared with risks and safety investments of the nuclear industry. Safety investments required to reduce the radioactivity releases and risks from nuclear power stations to ALAP levels are taken as a study case. It is found that risks in the nuclear industry are several orders of magnitude lower and safety investments per human life saved are several orders of magnitude higher, as compared with risks and safety investments in other human activities. It is also shown that the incremental safety investments needed to further reduce the radiation doses in the environment during normal and continuous operation of nuclear plants are extravagantly high as compared to safety investments in other human activities and in other facets of human life. Considering that there is a limit to the economic means available, societal expenditures for reducing risks should by spread, as much as possible, over all human activities to get the maximum return from investments. (B.G.)

Industrial high pressure applications. Processes, equipment and safety

Energy Technology Data Exchange (ETDEWEB)

Eggers, Rudolf (ed.) [Technische Univ. Hamburg-Harburg, Hamburg (Germany). Inst. fuer Thermische Verfahrenstechnik

2012-07-01

Industrial high pressure processes open the door to many reactions that are not possible under 'normal' conditions. These are to be found in such different areas as polymerization, catalytic reactions, separations, oil and gas recovery, food processing, biocatalysis and more. The most famous high pressure process is the so-called Haber-Bosch process used for fertilizers and which was awarded a Nobel prize. Following an introduction on historical development, the current state, and future trends, this timely and comprehensive publication goes on to describe different industrial processes, including methanol and other catalytic syntheses, polymerization and renewable energy processes, before covering safety and equipment issues. With its excellent choice of industrial contributions, this handbook offers high quality information not found elsewhere, making it invaluable reading for a broad and interdisciplinary audience.

Data Mining Mining Data: MSHA Enforcement Efforts, Underground Coal Mine Safety, and New Health Implications

OpenAIRE

Kniesner, Thomas J.; Leeth, John D.

2003-01-01

Studies of industrial safety regulations, OSHA in particular, often find little effect on worker safety. Critics of the regulatory approach argue that safety standards have little to do with industrial injuries, and defenders of the regulatory approach cite infrequent inspections and low penalties for violating safety standards. We use recently assembled data from the Mine Safety and Health Administration (MSHA) concerning underground coal mine production, safety regulatory activities, and wo...

Basic legal provisions concerning the activities of industrial security personnel

International Nuclear Information System (INIS)

Eberstein, H.H.

1980-01-01

The author confines himself to sabotage and espionage. Necessary counter-measures are determined by the respective type of activities. Sect. 618 of the German Civil Code and Sect. 120 a of the Industrial Code give basic legal provisions for the protection of industrial personnel. The legal position held by owner or occupant forms the legal basis for 'vulnerable point protection'. The owner's rights are assigned to the industrial police and are exercised in correspondence with the service or employment contract set up according to Sect. 611 and the following sections of the German Civil Code. Outside guards work according to the performance contract given int the Sections 675, 611, 631 of the German Civil Code. The security personnel has the common right of self-help: self-defence, civil rights concerning the state of national emergency and self-defence under criminal law, rights derived from ownership and property. The author critically argues views held by Mr. Hoffmann-Riem who thinks that police powers have been assigned to private persons. He definitely answers in the negative to the execution of, or encroachment on, sovereign (police) powers by industrial security personnel. A special legal regulation is not necessary, since private protection in form of professional selfdefence is admissible under the law in force. (HSCH) [de

Safety assessments and public concern for genetically modified food products: the American view.

Science.gov (United States)

Harlander, Susan K

2002-01-01

In the relatively short time since their commercial introduction in 1996, genetically modified (GM) crops have been rapidly adopted in the United States GM crops are regulated through a coordinated framework developed in 1992 and administered by three agencies-the US Department of Agriculture (USDA) that ensures the products are safe to grow, the Environmental Protection Agency (EPA) that ensures the products are safe for the environment, and the Food and Drug Administration (FDA) that ensures the products are safe to eat. Rigorous food and environmental safety assessments must be completed before GM crops can be commercialized. Fifty-one products have been reviewed by the FDA, including several varieties of corn, soybeans, canola, cotton, rice, sugar beets, potatoes, tomatoes, squash, papaya, and flax. Because FDA considers these crops "substantially equivalent" to their conventional counterparts, no special labeling is required for GM crops in the United States and they are managed as commodities with no segregation or identity preservation. GM crops have thus made their way through commodity distribution channels into thousands of ingredients used in processed foods. It has been estimated that 70% to 85% of processed foods on supermarket shelves in the United States today contain one or more ingredients potentially derived from GM crops. The food industry and retail industry have been monitoring the opinions of their consumers on the GM issue for the past several years. Numerous independent groups have also surveyed consumer concerns about GM foods. The results of these surveys are shared and discussed here.

Guideline for examination concerning the evaluation of safety in light water power reactor installations

International Nuclear Information System (INIS)

1978-01-01

This guideline was drawn up as the guide for examination when the safety evaluation of nuclear reactors is carried out at the time of approving the installation of light water power reactors. Accordingly in case of the examination of safety, it must be confirmed that the contents of application are in conformity with this guideline. If they are in conformity, it is judged that the safety evaluation of the policy in the basic design of a reactor facility is adequate, and also that the evaluation concerning the separation from the public in surroundings is adequate as the condition of location of the reactor facility. This guideline is concerned with light water power reactors now in use, but the basic concept may be the reference for the examination of the other types of reactors. If such a case occurs that the safety evaluation does not conform to this guideline, it is not excluded when the appropriate reason is clarified. The purpose of safety evaluation, the scope to be evaluated, the selection of the events to be evaluated, the criteria for judgement, the matters taken into consideration at the time of analysis, the concrete events of abnormal transient change and accident in operation, and the concrete events of serious accident and hypothetic accident are stipulated. The explanation and two appendices are attached. (Kako, I.)

ED accreditation update. Physicians, medical staff may report safety concerns without fear of disciplinary action.

Science.gov (United States)

2007-11-01

Educating your staff about The Joint Commission's requirements for concerns about hospital safety and quality of care requires the ED manager to set a tone of openness and cooperation, while at the same time emphasizing your department's role in addressing such concerns: * The ED should be the first place that staff members communicate quality and safety concerns. It is only when a problem is not addressed that they should take the issue to hospital administration and, if necessary, The Joint Commission. * A single event should not trigger a report to The Joint Commission, unless it is unusually serious. Otherwise, only a series of events should trigger a report. * Reassure your staff that you care about what is reported and will act quickly on it. Educate your staff about the reporting forms, and follow up with random audits to ensure compliance.

Measuring safety climate in a nuclear power plant - an experience sharing

International Nuclear Information System (INIS)

Vincy, M.U.; Varshney, Aloke; Khot, Pankaj

2016-01-01

In this paper the author discusses the experience gained in safety climate measurement of an Indian nuclear power plant. Safety performance is increasingly part of an organization's sustainable development. Nuclear power stations are falling under the category 'high reliability' industries in the world as far as work safety is concerned. Both the research and the practical experience continually point to two underlying factors that drive safety outcomes: the quality of an organisation's leadership and the resulting culture. After years of development in safety technology and safety management system in the industry, management of nuclear industry world over has come to recognize that safety culture has to be addressed if high standards of health and safety are to be maintained. Therefore, nuclear industries in India have been carrying out measurement of safety climate for more than ten years. The objectives of the study are to examine people's values, attitude, perception, competencies, and patterns of behaviour that determine the commitment to, and effectiveness of health and safety management in the industry based on a questionnaires survey and their analysis

Industrial safety and applied health physics. Annual report for 1980

International Nuclear Information System (INIS)

1981-11-01

Information is reported in sections entitled: radiation monitoring; Environmental Management Program; radiation and safety surveys; industrial safety and special projects; Office of Operational Safety; and training, lectures, publications, and professional activities. There were no external or internal exposures to personnel which exceeded the standards for radiation protection as defined in DOE Manual Chapter 0524. Only 35 employees received whole body dose equivalents of 10 mSv (1 rem) or greater. There were no releases of gaseous waste from the Laboratory which were of a level that required an incident report to DOE. There were no releases of liquid radioactive waste from the Laboratory which were of a level that required an incident report to DOE. The quantity of those radionuclides of primary concern in the Clinch River, based on the concentration measured at White Oak Dam and the dilution afforded by the Clinch River, averaged 0.16 percent of the concentration guide. The average background level at the Perimeter Air Monitoring (PAM) stations during 1980 was 9.0 μrad/h (0.090 μGy/h). Soil samples were collected at all perimeter and remote monitoring stations and analyzed for eleven radionuclides including plutonium and uranium. Plutonium-239 content ranged from 0.37 Bq/kg (0.01 pCi/g) to 1.5 Bq/kg (0.04 pCi/g), and the uranium-235 content ranged from 0.7 Bq/kg (0.02 pCi/g) to 16 Bq/kg (0.43 pCi/g). Grass samples were collected at all perimeter and remote monitoring stations and analyzed for twelve radionuclides including plutonium and uranium. Plutonium-239 content ranged from 0.04 Bq/kg (0.001 pCi/g) to 0.07 Bq/kg (0.002 pCi/g), and the uranium-235 content ranged from 0.37 Bq/kg (0.01 pCi/g) to 12 Bq/kg

Validation of a pre-existing safety climate scale for the Turkish furniture manufacturing industry.

Science.gov (United States)

Akyuz, Kadri Cemil; Yildirim, Ibrahim; Gungor, Celal

2018-03-22

Understanding the safety climate level is essential to implement a proactive safety program. The objective of this study is to explore the possibility of having a safety climate scale for the Turkish furniture manufacturing industry since there has not been any scale available. The questionnaire recruited 783 subjects. Confirmatory factor analysis (CFA) tested a pre-existing safety scale's fit to the industry. The CFA indicated that the structures of the model present a non-satisfactory fit with the data (χ 2  = 2033.4, df = 314, p ≤ 0.001; root mean square error of approximation = 0.08, normed fit index = 0.65, Tucker-Lewis index = 0.65, comparative fit index = 0.69, parsimony goodness-of-fit index = 0.68). The results suggest that a new scale should be developed and validated to measure the safety climate level in the Turkish furniture manufacturing industry. Due to the hierarchical structure of organizations, future studies should consider a multilevel approach in their exploratory factor analyses while developing a new scale.

Summary of Tiger Team Assessment and Technical Safety Appraisal recurring concerns in the Maintenance Area

International Nuclear Information System (INIS)

1993-01-01

Tiger Team Assessments and Technical Safety Appraisals (TSA) were reviewed and evaluated for concerns in the Maintenance Area (MA). Two hundred and thirty one (231) maintenance concerns were identified by the Tiger Team Assessments and TSA reports. These recurring concerns appear below. A summary of the Noteworthy Practices that were identified and a compilation of the maintenance concerns for each performance objective that were not considered as recurring are also included. Where the Tiger Team Assessment and TSA identified the operating contractor or facility by name, the concern has been modified to remove the name while retaining the intent of the comment

Genetically modified foods: safety, risks and public concerns-a review.

Science.gov (United States)

Bawa, A S; Anilakumar, K R

2013-12-01

Genetic modification is a special set of gene technology that alters the genetic machinery of such living organisms as animals, plants or microorganisms. Combining genes from different organisms is known as recombinant DNA technology and the resulting organism is said to be 'Genetically modified (GM)', 'Genetically engineered' or 'Transgenic'. The principal transgenic crops grown commercially in field are herbicide and insecticide resistant soybeans, corn, cotton and canola. Other crops grown commercially and/or field-tested are sweet potato resistant to a virus that could destroy most of the African harvest, rice with increased iron and vitamins that may alleviate chronic malnutrition in Asian countries and a variety of plants that are able to survive weather extremes. There are bananas that produce human vaccines against infectious diseases such as hepatitis B, fish that mature more quickly, fruit and nut trees that yield years earlier and plants that produce new plastics with unique properties. Technologies for genetically modifying foods offer dramatic promise for meeting some areas of greatest challenge for the 21st century. Like all new technologies, they also pose some risks, both known and unknown. Controversies and public concern surrounding GM foods and crops commonly focus on human and environmental safety, labelling and consumer choice, intellectual property rights, ethics, food security, poverty reduction and environmental conservation. With this new technology on gene manipulation what are the risks of "tampering with Mother Nature"?, what effects will this have on the environment?, what are the health concerns that consumers should be aware of? and is recombinant technology really beneficial? This review will also address some major concerns about the safety, environmental and ecological risks and health hazards involved with GM foods and recombinant technology.

SAFETY PERFORMANCE OF SUBCONTRACTORS IN THE PALESTINIAN CONSTRUCTION INDUSTRY

Directory of Open Access Journals (Sweden)

Adnan Enshassi

2008-06-01

Full Text Available Subcontractors perform most of the construction works and their effect on industry are apparent in different activities of construction. Therefore, subcontractors need more attention from government and contractors union. The aim of this paper is to identify, evaluate, and rank factors that influence safety performance of subcontractors in the Gaza Strip (Palestine according to their relative importance. The study concluded that reported accident rates will decrease among subcontractors and their workers if new workers are trained well in the work site and they are informed about dangerous places, and if a workable safety plan is well preplanned. The results also showed that reported accident rates increased among subcontractors when using old, unsafe equipment and due to the complexity or difficulty in the construction sites features. Owners and general contractors need to stipulate strict clauses for safety in the contract for improving safety record of subcontractors. Construction workers must receive proper job related safety and health training with a safety logbook. It is recommended that the subcontractors and workers should attend continuing safety programs on regular basis as part of their perquisite to work in construction sites.

Radiological safety in petroleum industry. Towards prevention culture

International Nuclear Information System (INIS)

Truppa, Walter A.

2007-01-01

Within the frame of regulatory control of industrial applications the audit of sealed and open radioactive sources in oil uses is one of the most relevant. The handling of radioactive sources, the requirement of procedures and training are just a few examples among all those that make up the radiological safety culture. A number of requirements divided into three main groups: operational safety at the storage area of radioactive sources, during transportation and during the applications (Cementation, well logging and use of radiotracers) are highlighted. Due to the great number of aspects that have to be taken in account as well as the interrelation of all control processes it is highly recommended that aspects of safety culture and quality should be considered and improvements regarding prevention, should be introduced so as to correct deviations that could arise in order to avoid radiological risk situations, emphasizing risk perception situations, attitude training, implementation of audit and level of safety in the facilities and control of duties, involving radiological material handling, described in the present work. (author) [es

Occupational safety and health in the food and drink industries.

OpenAIRE

Tomoda S

1993-01-01

Chapter 5 examines "Safety and health issues in respect of women workers in the food and drink industries". The paper provides information on the impact of technological progress in the sector; identifies the general hazards encountered; describes the injuries and diseases suffered by workers and concentrates on the most common approaches adopted for their prevention; and concludes by emphasizing the importance of adopting a tripartite approach to the solution of safety and health problems.

Quality and safety in Spain; La calidad y seguridad industrial en Espana

Energy Technology Data Exchange (ETDEWEB)

Prieto Barrio, J. M.; Martinez Martin, D. J.

2015-07-01

For three decades, and after the entry of Spain into the EU, it has been developed a regulatory, stable but evolving, framework that has allowed to create the conditions and structures to have stringent safety conditions of products and manufacturing facilities, as well as all the activities necessary for their certification and control. This development has been possible, among others, by the work of impulse and coordination of the Ministry of industry, Energy and Tourism, and particularly of the quality and Industrial safety sub directorate. On the other hand it has been developed a quality infrastructure that has, at the State level, with a standardisation (AENOR) entity and an accreditation body (ENAC) with recognized prestige around the world. In this article, in the first part, a list the regulations which apply to products and manufacturing facilities is shown, as well as explain the role played by standards and accreditation system in industrial safety and the factor of competitiveness that this entails for our industrial sector, and, in the second part, the institutional role of the Ministry and, the aforementioned Sub directorate, is described. The aim of the article is to be a descriptive reference of the current regulatory framework as well as the role of the State in this process. (Author)

Data Mining Mining Data: MSHA Enforcement Efforts, Underground Coal Mine Safety, and New Health Policy Implications

OpenAIRE

Thomas J. Kniesner; John D. Leeth

2003-01-01

Studies of industrial safety regulations, Occupational Safety and Health Administration (OSHA) in particular, often find little effect on worker safety. Critics of the regulatory approach argue that safety standards have little to do with industrial injuries and defenders of the regulatory approach cite infrequent inspections and low fines for violating safety standards. We use recently assembled data from the Mine Safety and Health Administration (MSHA) concerning underground coal mine produ...

Deeline and Fail: The ailing nuclear power industry

International Nuclear Information System (INIS)

Stoler, P.

1985-01-01

Peter Stoler, a Time correspondent, believes that if the government had regulated the nuclear power industry more strictly instead of being so friendly to it, the industry would be better off today. But Stoler thinks the dying industry can and should be saved. Better management, learning from foreign experience plus more governmental concern with safety are the main prescriptions. Most of the book contains a detailed history of the industry

Investigating ethnic minorities' perceptions of safety climate in the construction industry.

Science.gov (United States)

Chan, Albert P C; Wong, Francis K W; Hon, Carol K H; Lyu, Sainan; Javed, Arshad Ali

2017-12-01

An increasing number of ethnic minorities (EMs) have been employed in the construction industry to alleviate severe labor shortages in many countries. Unfortunately, statistics show that EMs have higher fatal and non-fatal occupational injury rates than their local counterparts. However, EMs are often underrepresented in safety climate (SC) research as they are difficult to reach and gauge their perception. A positive relationship has been widely found between SC and safety performance. Understanding the safety perceptions of EMs helps to reduce injuries and improve their safety performance. Based on a sample of 320 EMs from 20 companies in the construction industry, exploratory factor analysis (EFA) and confirmatory factor analysis (CFA) were used to identify the SC factors of EMs, and validate the extracted factors, respectively. Multivariate analysis of variance was undertaken to examine mean differences in perceptions of SC by personal characteristics. Three SC factors for EMs encapsulating 16 variables were identified through EFA. The hypothesized CFA model for a three-factor structure derived from EFA showed a satisfactory goodness-of-fit, composite reliability, and construct validity. Three SC factors were identified, namely: (a) safety management commitment, safety resources, and safety communication; (b) employee's involvement and workmate's influence; and (c) perception of safety rules, procedures and risks. The perceptions of SC differed significantly by nationality, marital status, the number of family members supported, and drinking habit. This study reveals the perception of EMs toward SC. The findings highlight the areas for safety improvement and provide leading indicators for safety performance of EMs. The findings are also enlightening for countries with a number of EMs, such as the United Sates, the United Kingdom, Australia, Singapore, and the Middle East. Copyright © 2017. Published by Elsevier Ltd.

A reasoned use of the notion of concernment: mobilizations about the nuclear industry

International Nuclear Information System (INIS)

Brunet, Ph.

2008-01-01

Discussing the mobilization of environmental associations from the sole sociological viewpoint of interest and calculations is no longer workable. Similarly, although the processual analysis of commitment has obvious heuristic virtues, it could be usefully completed to understand how it emerges and gets structured. This is why, in order to further develop this kind of analysis, we shall explore the processes leading to forms of organized commitment. To do so, Canguilhem's research about the epistemology of living organisms will be used. It shows that, when the resolution of problems between individuals and their milieu is attempted, it is always initiated by the former. By using the notion of 'concernment' and articulating it with those of environment and orientated behaviour, we intend to emphasize the singularity of the social dynamics that aim to solve the tensions inherent in environmental issues. Furthermore, through sociological analysis, one may get a glimpse of forms of similarity between 'concernment', commitment and cognitive mobilization. Our research is based on comparative data drawn from two surveys on the nuclear industry in France: one in Limousin concerning the uranium industry and another in La Hague, North Cotentin, dealing with radioactive waste. (author)

Physician attitudes towards pharmacological cognitive enhancement: safety concerns are paramount.

Directory of Open Access Journals (Sweden)

Opeyemi C Banjo

2010-12-01

Full Text Available The ethical dimensions of pharmacological cognitive enhancement have been widely discussed in academic circles and the popular media, but missing from the conversation have been the perspectives of physicians - key decision makers in the adoption of new technologies into medical practice. We queried primary care physicians in major urban centers in Canada and the United States with the aim of understanding their attitudes towards cognitive enhancement. Our primary hypothesis was that physicians would be more comfortable prescribing cognitive enhancers to older patients than to young adults. Physicians were presented with a hypothetical pharmaceutical cognitive enhancer that had been approved by the regulatory authorities for use in healthy adults, and was characterized as being safe, effective, and without significant adverse side effects. Respondents overwhelmingly reported increasing comfort with prescribing cognitive enhancers as the patient age increased from 25 to 65. When asked about their comfort with prescribing extant drugs that might be considered enhancements (sildenafil, modafinil, and methylphenidate or our hypothetical cognitive enhancer to a normal, healthy 40 year old, physicians were more comfortable prescribing sildenafil than any of the other three agents. When queried as to the reasons they answered as they did, the most prominent concerns physicians expressed were issues of safety that were not offset by the benefit afforded the individual, even in the face of explicit safety claims. Moreover, many physicians indicated that they viewed safety claims with considerable skepticism. It has become routine for safety to be raised and summarily dismissed as an issue in the debate over pharmacological cognitive enhancement; the observation that physicians were so skeptical in the face of explicit safety claims suggests that such a conclusion may be premature. Thus, physician attitudes suggest that greater weight be placed upon the

Computer-aided safety systems of industrial high energy objects

International Nuclear Information System (INIS)

Topolsky, N.G.; Gordeev, S.G.

1995-01-01

Modern objects of fuel and energy, chemical industries are characterized by high power consumption; by presence of large quantities of combustible and explosive substances used in technological processes; by advanced communications of submission systems of initial liquid and gasiform reagents, lubricants and coolants, the products of processing, and wastes of production; by advanced ventilation and pneumatic transport; and by complex control systems of energy, material and information flows. Such objects have advanced infrastructures, including a significant quantity of engineering buildings intended for storage, transportation, and processing of combustible liquids, gasiform fuels and materials, and firm materials. Examples of similar objects are nuclear and thermal power stations, chemical plants, machine-building factories, iron and steel industry enterprises, etc. Many tasks and functions characterizing the problem of fire safety of these objects can be accomplished only upon the development of special Computer-Aided Fire Safety Systems (CAFSS). The CAFSS for these objects are intended to reduce the hazard of disastrous accidents both causing fires and caused by them. The tasks of fire prevention and rescue work of large-scale industrial objects are analyzed within the bounds of the recommended conception. A functional structure of CAFSS with a list of the main subsystems forming a part of its composition has been proposed

Days on safety of industrial radiographic controls

International Nuclear Information System (INIS)

2008-01-01

This program is divided in three parts: the context and the regulations, the preparation and the implementation, the tools of prevention and the initiatives and the perspectives.In the first part devoted to the context and regulation are: the context by the Authority of nuclear safety (A.S.N.), the regulation referential, the transport of gamma-graphs; in the second part are the distribution of liabilities, materials and associated requirements, the feedback of incidents and exploitation of it, training and base requirements, works of S.F.R.P./C.O.F.R.E.N.D. and the A.S.N. position; the third part includes help to evaluation of risks at working places of industry radiologists, dosimetry study of a working place, guide to evaluate oneself; the fourth part devoted to the initiatives and the perspectives are: regional experiences charters of good practices in industry radiography, integration of works and deployment by the members of the C.O.F.R.E.N.D., perspectives in matter of prevention of occupational risks in the area of industry radiography. (N.C.)

Advanced korean industrial safety and health policy with risk assessment.

Science.gov (United States)

Kwon, Hyuckmyun; Cho, Jae Hyun; Moon, Il; Choi, Jaewook; Park, Dooyong; Lee, Youngsoon

2010-09-01

This article describes a systematic roadmap master plan for advanced industrial safety and health policy in Korea, with an emphasis on. Since Korean industries had first emergence of industrial safety and health policy in 1953, enormous efforts have been made on upgrading the relevant laws in order to reflect real situation of industrial work environment in accordance with rapid changes of Korean and global business over three decades. Nevertheless, current policy has major defects; too much techniques-based articles, diverged contents in less organization, combined enforcement and punishments and finally enforcing regulations full of commands and control. These deficiencies have make it difficult to accommodate changes of social, industrial and employment environment in customized fashion. The approach to the solution must be generic at the level of paradigm-shift rather than local modifications and enhancement. The basic idea is to establish a new system integrated with a risk assessment scheme, which encourages employers to apply to their work environment under comprehensive responsibility. The risk assessment scheme is designed to enable to inspect employers' compliances afterwards. A project comprises four yearly phases based on applying zones; initially designating and operating a specified risk zone, gradually expanding the special zones during a period of 3 years (2010-2012) and the final zone expanded to entire nation. In each phase, the intermediate version of the system is updated through a process of precise and unbiased validation in terms of its operability, feasibility and sustainability with building relevant infrastructures as needed.

Development of the safety evaluation system in the respects of organizational factors and workers' consciousness. Pt. 5. Application of the system for industries except electric power industry

International Nuclear Information System (INIS)

Hasegawa, Naoko; Hirose, Ayako; Hayase, Kenichi; Sasou Kunihide; Takano, Kenichi

2004-01-01

The purpose of our study is to develop a safety evaluation system which clarifies the safety level of an organization. As a basic method of evaluation using a questionnaire had been established, now that the generalization is needed for the system. Hence, this paper is intended to verify the applicability of the system for eight manufacture industries. The investigation using a questionnaire was conducted for 125 factories' workers. The following results were obtained: 1) The Comprehensive Safety Index (CSI) taking into account individual and organizational factors was identified using the principal component analysis. 2) Although the criterion-related validity of CSI was confirmed for some industries, ti will be necessary for the advancement of the system's reliability to compile more data into the system. 3) According to the result of investigations on safety management in secure companies and the causes of current industrial accidents, it was clarified that the CSI had the content validity. 4) It seemed possible to evaluate the safety level using two different industries' data if there were similarities between the industries in the score of the CSI and the aspects to which were attached importance for the improvement of the safety. (author)

Establish Central Kitchen under HACCP Control in Food and Beverage Industry to Ensure Food Safety and Hygiene

Directory of Open Access Journals (Sweden)

Cuihua Qi

2014-04-01

Full Text Available In recent years, food safety and hygiene have been a social problem. So, it is worth studying in-depth that how to control the safety and hygiene of food and beverage. This paper proposes to establish central kitchens under HACCP control to ensure food safety and hygiene in the food and beverage industry. Considering the practical difficulties in the application of HACCP, this paper introduces the establishment of dishes HACCP system with some examples to give the reference of the food and beverage industry. Central kitchens have many advantages while HACCP is the golden standard to ensure food safety and hygiene, hence, it will ensure food safety and hygiene if both can be combined with in the use of food and beverage industry.

Construction Safety And Health Factors At The Industry Level: The Case Of Singapore

Directory of Open Access Journals (Sweden)

Charles Y.J. Cheah

2007-12-01

Full Text Available The construction industry is one of the most hazardous industries due to the unique nature of its products and the processes involved. Recent occurrences of highly publicized construction site accidents in Singapore have highlighted the immediate needs for the local industry to address safety and attention at the industry level. The objective of this paper is to examine issues and critical factors affecting S&H standards in Singapore. Clearly, collective efforts should be pursued at the industry level as the country moves towards the ultimate safety management strategy of self-regulation. The findings also indicate that the challenge of making worksites safe should not be placed solely on the contractors but should be shared by all parties affecting the value chain of construction, including the developers, the consultants and the government. The factors identified through factor analysis may inform legislators and industry practitioners in terms of the sources of problems and help develop effective strategies for improvement. Some of the experiences mentioned in the paper could also be relevant to other countries facing similar circumstances.

Modeling the factors affecting unsafe behavior in the construction industry from safety supervisors' perspective.

Science.gov (United States)

Khosravi, Yahya; Asilian-Mahabadi, Hassan; Hajizadeh, Ebrahim; Hassanzadeh-Rangi, Narmin; Bastani, Hamid; Khavanin, Ali; Mortazavi, Seyed Bagher

2014-01-01

There can be little doubt that the construction is the most hazardous industry in the worldwide. This study was designed to modeling the factors affecting unsafe behavior from the perspective of safety supervisors. The qualitative research was conducted to extract a conceptual model. A structural model was then developed based on a questionnaire survey (n=266) by two stage Structural Equation Model (SEM) approach. An excellent confirmed 12-factors structure explained about 62% of variances unsafe behavior in the construction industry. A good fit structural model indicated that safety climate factors were positively correlated with safety individual factors (Pconstruction workers' engagement in safe or unsafe behavior. In order to improve construction safety performance, more focus on the workplace condition is required.

Ordinance of 14 March 1983 concerning the Federal Commission for the Safety of Nuclear Installations

International Nuclear Information System (INIS)

1983-01-01

The Frederal Council issued a new Ordinance concerning the Federal Commission for the Safety of Nuclear Installations. This Ordinance replaces an Ordinance of 13 June 1960 and takes into account the distribution of tasks decided several years ago between the Commission, which operates on a part-time basis, and the principal Division for the Safety of Nuclear Installations attached to the Federal Office of Energy. (NEA) [fr

Health and safety measures available for young labourers in the cottage industries of Karachi.

Science.gov (United States)

Baig, Lubna A; Rasheed, Shahida; Zameer, Mehvash; Zameer, Mehwash

2005-01-01

To determine the health problems faced by labourers, 18 years and under, working in the cottage industries of Karachi and know the safety measures available and utilized at these places. Cross-sectional study using two-stage cluster sampling. From February 2002 to March 2003, 95 cottage industries from 10 different locations of five districts of Karachi were included. All workers, 18 years and below, present were interviewed. The environmental and safety gadgets present at the industry were inspected by the surveyors and the manager was interviewed for presence of health and safety benefits for the workers. A total of 280 workers were interviewed, 26 (9.3%) children were between 9-12 years, 82 (29.3%) were between 13-15 and 172 (61.4%) were between 16-18 years of age. Health benefit was given to only one 13-year-old worker in silk industry; appropriate gadgets were absent in 93 (97.8%) industries, present only in 2 industries (one silk and one loom). First Aid box was present in only one loom industry. Two hundred and forty workers (85.7%) were unaware of the materials they were using. One hundred and ninety-three (69%) children were working in improper light, 199(71%) workers experienced high level of noise, 232(83%) were working in high temperature and 155(55.3%) were working with improper ventilation. Health problems faced included joint pains (n=64, 22.85%), backache (n=85, 30.35%), vertigo (n=48, 17.14%), numbness of fingers (n=77, 27.5%) and fatigue experienced by 143 (51.07%) children. The children and adolescents employed in cottage industry are suffering from health problems due to lack of knowledge on their part, and improper ergonomics, environmental and safety conditions at the workplace. The cottage industry should be regulated and brought under labour law. The health sector non-governmental organizations should make concerted efforts for the rehabilitation of this workforce by creating awareness and providing opportunities for education and

Manual on oil-gas industry waste utilization radioecological safety

International Nuclear Information System (INIS)

Kudryashev, V.A.; Lukashenko, S.N.; Tuleushev, A.Zh.; Marabaev, Zh.N.; Pasysaev, V.A.; Kayukov, P.G.; Kozhakhmetov, N.B.; Shevtsov, S.P.

2003-01-01

The development of a new document - 'Manual on radio-ecologically safe utilization of waste from oil-and-gas production' is carried out. This document regulates the whole cycle of environment protection measures at waste utilization for the named industry in Kazakhstan and is aimed on lowering the radiation risks and assurance of radioecological safety both at present and for the future. The document presents a set regulations necessary for radioactive wastes handling in the oil-gas industry. The normative document was agreed in both the Ministry of Health of the Republic of Kazakhstan (RK) and Ministry of Environment Protection of RK

Scale development of safety management system evaluation for the airline industry.

Science.gov (United States)

Chen, Ching-Fu; Chen, Shu-Chuan

2012-07-01

The airline industry relies on the implementation of Safety Management System (SMS) to integrate safety policies and augment safety performance at both organizational and individual levels. Although there are various degrees of SMS implementation in practice, a comprehensive scale measuring the essential dimensions of SMS is still lacking. This paper thus aims to develop an SMS measurement scale from the perspective of aviation experts and airline managers to evaluate the performance of company's safety management system, by adopting Schwab's (1980) three-stage scale development procedure. The results reveal a five-factor structure consisting of 23 items. The five factors include documentation and commands, safety promotion and training, executive management commitment, emergency preparedness and response plan and safety management policy. The implications of this SMS evaluation scale for practitioners and future research are discussed. Copyright © 2012 Elsevier Ltd. All rights reserved.

Teamwork and Safety in the Maritime Industry: A SWOT Approach

OpenAIRE

Vestad, Anne-Lise

2010-01-01

Abstract The past few decades the use of teams has increased, also in complex sociotechnical systems such as the maritime industry. Safety issues involve a wide range of elements, including human factors, and pose a number of challenges to organisations in the shipping industry. The primary aim of this study was to examine the Big Five of teamwork model and its ability to capture teamwork aspects of all kinds of teams, independent of team type, organisational level and domain. The collect...

A model of Occupational Safety and Health Management System (OSHMS) for promoting and controlling health and safety in textile industry.

Science.gov (United States)

Manimaran, S; Rajalakshmi, R; Bhagyalakshmi, K

2015-01-01

The development of Occupational Safety and Health Management System in textile industry will rejuvenate the workers and energize the economy as a whole. In India, especially in Tamil Nadu, approximately 1371 textile business is running with the help of 38,461 workers under Ginning, Spinning, Weaving, Garment and Dyeing sectors. Textile industry of contributes to the growth of Indian economy but it fails to foster education and health as key components of human development and help new democracies. The present work attempts to measure and develop OSHMS which reduce the hazards and risk involved in textile industry. Among all other industries textile industry is affected by enormous hazards and risk because of negligence by management and Government. It is evident that managements are not abiding by law when an accident has occurred. Managements are easily deceiving workers and least bothered about the Quality of Work Life (QWL). A detailed analysis of factors promoting safety and health to the workers has been done by performing confirmatory factor analysis, evaluating Risk Priority Number and the framework of OHMS has been conceptualized using Structural Equation Model. The data have been collected using questionnaire and interview method. The study finds occupation health for worker in Textile industry is affected not only by safety measure but also by technology and management. The work shows that difficulty in identifying the cause and effect of hazards, the influence of management in controlling and promoting OSHMS under various dimensions. One startling fact is existence of very low and insignificance correlation between health factors and outcome.

Links between operating experience feedback of industrial accidents and nuclear safety

International Nuclear Information System (INIS)

Eury, S.P.

2012-01-01

Since 1992, the bureau for analysis of industrial risks and pollutions (BARPI) collects, analyzes and publishes information on industrial accidents. The ARIA database lists over 40.000 accidents or incidents, most of which occurred in French classified facilities (ICPE). Events occurring in nuclear facilities are rarely reported in ARIA because they are reported in other databases. This paper describes the process of selection, characterization and review of these accidents, as well as the following consultation with industry trade groups. It is essential to publicize widely the lessons learned from analyzing industrial accidents. To this end, a web site (www.aria.developpement-durable.gouv.fr) gives free access to the accidents summaries, detailed sheets, studies, etc. to professionals and the general public. In addition, the accidents descriptions and characteristics serve as inputs to new regulation projects or risk analyses. Finally, the question of the links between operating experience feedback of industrial accidents and nuclear safety is explored: if the rigorous and well-documented methods of experience feedback in the nuclear field certainly set an example for other activities, nuclear safety can also benefit from inputs coming from the vast diversity of accidents arisen into industrial facilities because of common grounds. Among these common grounds we can find: -) the fuel cycle facilities use many chemicals and chemical processes that are also used by chemical industries; -) the problems resulting from the ageing of equipment affect both heavy and nuclear industries; -) the risk of hydrogen explosion; -) the risk of ammonia, ammonia is a gas used by nuclear power plants as an ingredient in the onsite production of mono-chloramine and ammonia is involved in numerous accidents in the industry: at least 900 entries can be found in the ARIA database. The paper is followed by the slides of the presentation

A reasoned use of the notion of concernment: mobilizations about the nuclear industry; De l'usage raisonne de la notion de concernement: mobilisations locales a propos de l'industrie nucleaire

Energy Technology Data Exchange (ETDEWEB)

Brunet, Ph. [Universite d' Evry Val d' Essonne, Centre Pierre Naville, TEPP/FR-CNRS 3126, 87 - Panazol (France)

2008-10-15

Discussing the mobilization of environmental associations from the sole sociological viewpoint of interest and calculations is no longer workable. Similarly, although the processual analysis of commitment has obvious heuristic virtues, it could be usefully completed to understand how it emerges and gets structured. This is why, in order to further develop this kind of analysis, we shall explore the processes leading to forms of organized commitment. To do so, Canguilhem's research about the epistemology of living organisms will be used. It shows that, when the resolution of problems between individuals and their milieu is attempted, it is always initiated by the former. By using the notion of 'concernment' and articulating it with those of environment and orientated behaviour, we intend to emphasize the singularity of the social dynamics that aim to solve the tensions inherent in environmental issues. Furthermore, through sociological analysis, one may get a glimpse of forms of similarity between 'concernment', commitment and cognitive mobilization. Our research is based on comparative data drawn from two surveys on the nuclear industry in France: one in Limousin concerning the uranium industry and another in La Hague, North Cotentin, dealing with radioactive waste. (author)

Advanced Korean Industrial Safety and Health Policy with Risk Assessment

Directory of Open Access Journals (Sweden)

Hyuckmyun Kwon

2010-09-01

Full Text Available This article describes a systematic roadmap master plan for advanced industrial safety and health policy in Korea, with an emphasis on. Since Korean industries had first emergence of industrial safety and health policy in 1953, enormous efforts have been made on upgrading the relevant laws in order to reflect real situation of industrial work environment in accordance with rapid changes of Korean and global business over three decades. Nevertheless, current policy has major defects; too much techniques-based articles, diverged contents in less organization, combined enforcement and punishments and finally enforcing regulations full of commands and control. These deficiencies have make it difficult to accommodate changes of social, industrial and employment environment in customized fashion. The approach to the solution must be generic at the level of paradigm- shift rather than local modifications and enhancement. The basic idea is to establish a new system integrated with a risk assessment scheme, which encourages employers to apply to their work environment under comprehensive responsibility. The risk assessment scheme is designed to enable to inspect employers’ compliances afterwards. A project comprises four yearly phases based on applying zones; initially designating and operating a specified risk zone, gradually expanding the special zones during a period of 3 years (2010-2012 and the final zone expanded to entire nation. In each phase, the intermediate version of the system is updated through a process of precise and unbiased validation in terms of its operability, feasibility and sustainability with building relevant infrastructures as needed.

Probabilistic analysis of safety in industrial irradiation plants

International Nuclear Information System (INIS)

Alderete, F.; Elechosa, C.

2006-01-01

The Argentinean Nuclear Regulatory Authority is carrying out the Probabilistic Safety Analysis (PSA) of the two industrial irradiation plants existent in the country. The objective of this presentation is to show from the regulatory point of view, the advantages of applying this tool, as well as the appeared difficulties; for it will be made a brief description of the facilities, of the method and of the normative one. Both plants are multipurpose facilities classified as 'industrial irradiator category IV' (panoramic irradiator with source deposited in pool). Basically, the execution of an APS consists of the following stages: 1. Identification of initiating events. 2. Modeling of Accidental Sequences (Event Trees). 3. Analysis of Systems (Fault trees). 4. Quantification of Accidental Sequences. The argentine normative doesn't demand to these facilities the realization of an APS, however the basic standard of Radiological Safety establishes that in the design of this type of facilities in the cases that is justified, should make sure that the annual probability of occurrence of an accidental sequence and the resulting dose in a person gives as result an radiological risk inferior to the risk limit adopted as acceptance criteria. On the other hand the design standard specifies for these irradiators it demands a maximum fault rate of 10 -2 for the related components with the systems of radiological safety. In our case, the possible initiating events have been identified that carried out to not wanted situations (about people exposure, radioactive contamination). Then, for each one of the significant initiating events, the corresponding accidental sequences were modeled and the safety systems that intervene in this sequences by means of fault trees were analyzed, for then to determine the fault probabilities of the same ones. At the moment they are completing these fault trees, but the difficulty resides in the impossibility of obtaining real data of the reliability

Safety Culture Development : The Gap Between Industry Guidelines and Literature, and the Differences Amongst Industry Sectors.

NARCIS (Netherlands)

Karanikas, Nektarios; Soltani, Pedram; de Boer, Robert J.; Roelen, Alfred L.C.; Arezes, Pedro

2016-01-01

Reason’s typology of safety culture (i.e. Just, Informative, Learning, Flexible and Reporting cultures) is widely used in the industry and academia. Through literature review we developed a framework including 36 markers that reflect the operationalization of Reason’s sub-cultures and general

Nanotechnology in food science: Functionality, applicability, and safety assessment

Directory of Open Access Journals (Sweden)

Xiaojia He

2016-10-01

Full Text Available Rapid development of nanotechnology is expected to transform many areas of food science and food industry with increasing investment and market share. In this article, current applications of nanotechnology in food systems are briefly reviewed. Functionality and applicability of food-related nanotechnology are highlighted in order to provide a comprehensive view on the development and safety assessment of nanotechnology in the food industry. While food nanotechnology offers great potential benefits, there are emerging concerns arising from its novel physicochemical properties. Therefore, the safety concerns and regulatory policies on its manufacturing, processing, packaging, and consumption are briefly addressed. At the end of this article, the perspectives of nanotechnology in active and intelligent packaging applications are highlighted.

Report on the handling of safety information concerning flammable gases and ferrocyanide at the Hanford waste tanks

International Nuclear Information System (INIS)

1990-07-01

This report discusses concerns safety issues, and management at Hanford Tank Farm. Concerns center on the issue of flammable gas generation which could ignite, and on possible exothermic reactions of ferrocyanide compounds which were added to single shell tanks in the 1950's. It is believed that information concerning these issues has been mis-handled and the problems poorly managed

Report on the handling of safety information concerning flammable gases and ferrocyanide at the Hanford waste tanks

Energy Technology Data Exchange (ETDEWEB)

1990-07-01

This report discusses concerns safety issues, and management at Hanford Tank Farm. Concerns center on the issue of flammable gas generation which could ignite, and on possible exothermic reactions of ferrocyanide compounds which were added to single shell tanks in the 1950's. It is believed that information concerning these issues has been mis-handled and the problems poorly managed. (CBS)

Genetics and Insurance in Australia: Concerns around a Self-Regulated Industry.

Science.gov (United States)

Newson, Ainsley J; Tiller, Jane; Keogh, Louise A; Otlowski, Margaret; Lacaze, Paul

2017-01-01

Regulating the use of genetic information in insurance is an issue of ongoing international debate. In Australia, providers of life and other mutually rated insurance products can request applicants to disclose all results from any genetic test. Insurers can then use this information to adjust premiums and make policy decisions. The Australian Financial Services Council (FSC; an industry body) developed and maintains the relevant industry standard, which was updated in late 2016. Aims/Objective: To review the 2016 FSC Standard in light of relevant research and determine the legitimacy of the Australian regulatory environment regarding use of genetic information by insurers. We identified five concerns arising from the 2016 FSC Standard: (1) use of results obtained from research; (2) the requirement for an applicant to disclose whether they are "considering" a genetic test; (3) failure to account for genome sequencing and other technology developments; (4) limited evidence regarding adverse selection; and (5) the inappropriateness of industry self-regulation. Industry self-regulation of the use of genetic information by life insurers, combined with a lack of government oversight, is inappropriate and threatens to impede the progress of genomic medicine in Australia. At this critical time, Australia requires closer government oversight of the use of genetic information in insurance. © 2017 S. Karger AG, Basel.

Health and safety annual report 1992

International Nuclear Information System (INIS)

1993-01-01

BNFL operates 6 sites in the United Kingdom concerned with the nuclear fuel cycle. The annual report on occupational health and safety gives information on all aspects of health and safety within BNFL with special reference to radiation doses received by the workforce and radiation protection measures taken by the company. BNFL's safety policy is set out. Radiation doses to all workers have remained low. Other industrial accidents are also listed and its safety measures for transport, radioactive effluents and in the event of an incident, are mentioned briefly. (UK)

Cooperative conflict and contested space: a case study of risk and safety in the steel industry.

OpenAIRE

2008-01-01

This dissertation is a journey into the world of risk and safety in the steel industry. The problem statement that is explored in this study relates to the nature of the relationship between safety performance and stakeholders in the steel industry, the nature of the relationships between different stakeholders and the way in which these relationships impact on risk management strategies. The author contends that safety is not a normative or procedural system within the workplace, but rather ...

Fisheries and aquaculture industries involvement to control product health and quality safety to satisfy consumer-driven objectives on retail markets in Europe.

Science.gov (United States)

Roth, Eva; Rosenthal, Harald

2006-01-01

Over the past years the export of agricultural and fishery products from developing countries has substantially increased to markets within the OECD. Retailers and importers are expanding their international operations to meet consumer demands for year-round delivery of products. Moreover, consumers have become increasingly concerned about the safety of food, including those derived from aquatic resources [FAO/NACA/WHO Joint Study Group, 1999. Report food safety issues associated with products from aquaculture. WHO Technical Report Series No 883: VII, pp. 1-55]. Governments and leading businesses are responding by imposing new safety regulations and standards to the international food system (e.g. HACCP, EUREP-GAP), product liability and labeling [Reilly, A., Howgate, P., Käferstein, F., 1997. Safety hazards and the application of HACCP in aquaculture. In: Proceedings of the Second International Conference on Fish Inspection and Quality Control: A Global Focus, Arlington, VA, 19-24 May 1996. Technomic Publishing, Lancaster, PA, pp. 353-373]. Initial concerns for imports of aquacultural products from developing to industrialized countries focussed on bacterial contamination [Buras, N. 1993. Microbial safety of produce from wastewater-fed aquaculture. In: Pullin, R.V.C., Rosenthal, H., MacLean, J.L.(Eds.), Proceedings of ICLARM Conferences, vol. 31, pp. 285-295]. Today, if trade opportunities are to be maintained, these countries must adapt to a full array of regulations and standards. This paper describes four scenarios in aquaculture and fishing product trade between developing countries and countries in the European Union.

Fisheries and aquaculture industries involvement to control product health and quality safety to satisfy consumer-driven objectives on retail markets in Europe

International Nuclear Information System (INIS)

Roth, Eva; Rosenthal, Harald

2006-01-01

Over the past years the export of agricultural and fishery products from developing countries has substantially increased to markets within the OECD. Retailers and importers are expanding their international operations to meet consumer demands for year-round delivery of products. Moreover, consumers have become increasingly concerned about the safety of food, including those derived from aquatic resources [FAO/NACA/WHO Joint Study Group, 1999. Report food safety issues associated with products from aquaculture. WHO Technical Report Series No 883: VII, pp. 1-55]. Governments and leading businesses are responding by imposing new safety regulations and standards to the international food system (e.g. HACCP, EUREP-GAP), product liability and labeling [Reilly, A., Howgate, P., Kaeferstein, F., 1997. Safety hazards and the application of HACCP in aquaculture. In: Proceedings of the Second International Conference on Fish Inspection and Quality Control: A Global Focus, Arlington, VA, 19-24 May 1996. Technomic Publishing, Lancaster, PA, pp. 353-373]. Initial concerns for imports of aquacultural products from developing to industrialized countries focussed on bacterial contamination [Buras, N. 1993. Microbial safety of produce from wastewater-fed aquaculture. In: Pullin, R.V.C., Rosenthal, H., MacLean, J.L.(Eds.), Proceedings of ICLARM Conferences, vol. 31, pp. 285-295]. Today, if trade opportunities are to be maintained, these countries must adapt to a full array of regulations and standards. This paper describes four scenarios in aquaculture and fishing product trade between developing countries and countries in the European Union

Fisheries and aquaculture industries involvement to control product health and quality safety to satisfy consumer-driven objectives on retail markets in Europe

Energy Technology Data Exchange (ETDEWEB)

Roth, Eva [University of South Denmark, Department of Environmental and Business Economics, Niels Bohrs vej 9, DK-6700 Esbjerg (Denmark); Institute for Marine Research, University Kiel, Duesternbrooker Weg 20, 24105 Kiel (Germany); Rosenthal, Harald [University of South Denmark, Department of Environmental and Business Economics, Niels Bohrs vej 9, DK-6700 Esbjerg (Denmark); Institute for Marine Research, University Kiel, Duesternbrooker Weg 20, 24105 Kiel (Germany)

2006-07-01

Over the past years the export of agricultural and fishery products from developing countries has substantially increased to markets within the OECD. Retailers and importers are expanding their international operations to meet consumer demands for year-round delivery of products. Moreover, consumers have become increasingly concerned about the safety of food, including those derived from aquatic resources [FAO/NACA/WHO Joint Study Group, 1999. Report food safety issues associated with products from aquaculture. WHO Technical Report Series No 883: VII, pp. 1-55]. Governments and leading businesses are responding by imposing new safety regulations and standards to the international food system (e.g. HACCP, EUREP-GAP), product liability and labeling [Reilly, A., Howgate, P., Kaeferstein, F., 1997. Safety hazards and the application of HACCP in aquaculture. In: Proceedings of the Second International Conference on Fish Inspection and Quality Control: A Global Focus, Arlington, VA, 19-24 May 1996. Technomic Publishing, Lancaster, PA, pp. 353-373]. Initial concerns for imports of aquacultural products from developing to industrialized countries focussed on bacterial contamination [Buras, N. 1993. Microbial safety of produce from wastewater-fed aquaculture. In: Pullin, R.V.C., Rosenthal, H., MacLean, J.L.(Eds.), Proceedings of ICLARM Conferences, vol. 31, pp. 285-295]. Today, if trade opportunities are to be maintained, these countries must adapt to a full array of regulations and standards. This paper describes four scenarios in aquaculture and fishing product trade between developing countries and countries in the European Union.

United States import safety, environmental health, and food safety regulation in China.

Science.gov (United States)

Nyambok, Edward O; Kastner, Justin J

2012-01-01

China boasts a rapidly growing economy and is a leading food exporter. Since China has dominated world export markets in food, electronics, and toys, many safety concerns about Chinese exports have emerged. For example, many countries have had problems with Chinese food products and food-processing ingredients. Factors behind food safety and environmental health problems in China include poor industrial waste management, the use of counterfeit agricultural inputs, inadequate training of farmers on good farm management practices, and weak food safety laws and poor enforcement. In the face of rising import safety problems, the U.S. is now requiring certification of products and foreign importers, pursuing providing incentives to importers who uphold good safety practices, and considering publicizing the names of certified importers.

Managing change in the nuclear industry: The effects on safety. INSAG-18. A report by the International Nuclear Safety Advisory Group

International Nuclear Information System (INIS)

2003-01-01

The nuclear industry is going through a period of unprecedented change. The changes arise from the political and business environment in which the industry must operate, and from within the industry itself as it strives to become more competitive. These pressures have already led to significant changes in how nuclear enterprises are organized. The changes can be expected to continue. It is absolutely essential that throughout the period of time that organizational changes are taking place, and after the changes have occurred, very high standards of safety are maintained by all the elements that make up the industry. Changes can be made effectively and safely, and gains in efficiency and competitiveness, as well as safety, can be realized if changes are introduced carefully and managed well. Experience has shown that this is not a simple matter to achieve. Nuclear installations are complex, and it is inherently demanding to foresee all the implications that a change may have on safety. However, experience has shown very clearly that many changes have a strong potential to affect both the safety that has been built into a design and in the safety culture of an organization. Hence failure to manage change well can significantly affect the likelihood of an accident, the degree to which the assets of the company are put at risk and the company's reputation. This INSAG report is directed at members of boards of directors and senior executives who are responsible for the overall safety of an installation, who make decisions for change and who implement these decisions. It is also written for senior regulators who, on behalf of the public, ensure that boards of directors and executives meet their responsibilities for safety. This report discusses how and why change can challenge the maintenance of a high level of safety, and what can be done to control that challenge and hence reap all the benefits of change. It draws an analogy between the well established principles for

A review on the benchmarking concept in Malaysian construction safety performance

Science.gov (United States)

Ishak, Nurfadzillah; Azizan, Muhammad Azizi

2018-02-01

Construction industry is one of the major industries that propels Malaysia's economy in highly contributes to our nation's GDP growth, yet the high fatality rates on construction sites have caused concern among safety practitioners and the stakeholders. Hence, there is a need of benchmarking in performance of Malaysia's construction industry especially in terms of safety. This concept can create a fertile ground for ideas, but only in a receptive environment, organization that share good practices and compare their safety performance against other benefit most to establish improvement in safety culture. This research was conducted to study the awareness important, evaluate current practice and improvement, and also identify the constraint in implement of benchmarking on safety performance in our industry. Additionally, interviews with construction professionals were come out with different views on this concept. Comparison has been done to show the different understanding of benchmarking approach and how safety performance can be benchmarked. But, it's viewed as one mission, which to evaluate objectives identified through benchmarking that will improve the organization's safety performance. Finally, the expected result from this research is to help Malaysia's construction industry implement best practice in safety performance management through the concept of benchmarking.

Human factor in the problem of Russian nuclear industry safety

International Nuclear Information System (INIS)

Abramova, V.

2002-01-01

The approach to human factor definition, considered in the paper, consists of recognition of as many as possible factors for developing a complete list of factors, which have influence on mistakes or successful work of NPP personnel. Safety culture is considered as the main factor. The enhancement in nuclear power industry includes an optimization of organizational structures and development of personnel safety attitudes. The organizational factors, as possible root causes for human errors, need to be identified, assessed and improved. The organizational activities taken in Russia are presented

77 FR 36606 - Pipeline Safety: Government/Industry Pipeline Research and Development Forum, Public Meeting

Science.gov (United States)

2012-06-19

...: Threat Prevention --Working Group 2: Leak Detection/Mitigation & Storage --Working Group 3: Anomaly... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket ID PHMSA-2012-0146] Pipeline Safety: Government/Industry Pipeline Research and Development Forum, Public...

Safety instrumented systems in the oil and gas industry : Concepts and methods for safety and reliability assessments in design and operation

Energy Technology Data Exchange (ETDEWEB)

Lundteigen, Mary Ann

2009-07-01

This thesis proposes new methods and gives new insight to safety and reliability assessments of safety instrumented systems (SISs). These systems play an important role in many industry sectors and are used to detect the onset of hazardous events and mitigate their consequences to humans, the environment, and material assets. The thesis focuses on SIS applications in the oil and gas industry. Here, the SIS must respond to hazardous events such as gas leakages, fires, and over pressurization. Because there are personnel onboard the oil and gas installations, the operations take place in a vulnerable marine environment, and substantial values are associated with the offshore facilities, the reliability of SIS is of great concern to the public, the authorities, and the plant owners. The objective of this project has been to identify some of the key factors that influence the SIS reliability, clarify their effects on reliability, and suggest means to improve the treatment of these factors in safety and reliability assessments in design and operation. The project builds on concepts, methods, and definitions in two key standards for SIS design, construction, and operation: IEC 61508 and IEC 61511. The main contributions from this project are: A product development model that integrates reliability, availability, maintainability, and safety (RAMS) requirements with product development. The contributions have been presented in ten articles, five published in international journals, two submitted for publication, and three presented at conferences and in conference proceedings. The contributions are also directed to the industry and the actors that are involved in SIS design, construction, and operation. Even if the oil and gas industry is the main focus area, the results may be relevant for other industry sectors as well. SIS manufacturers and SIS designers face a large number of requirements from authorities, oil companies, international standards, and so on. At the same

Advanced Manufacturing Systems in Food Processing and Packaging Industry

International Nuclear Information System (INIS)

Sani, Mohd Shafie; Aziz, Faieza Abdul

2013-01-01

In this paper, several advanced manufacturing systems in food processing and packaging industry are reviewed, including: biodegradable smart packaging and Nano composites, advanced automation control system consists of fieldbus technology, distributed control system and food safety inspection features. The main purpose of current technology in food processing and packaging industry is discussed due to major concern on efficiency of the plant process, productivity, quality, as well as safety. These application were chosen because they are robust, flexible, reconfigurable, preserve the quality of the food, and efficient.

Advanced Manufacturing Systems in Food Processing and Packaging Industry

Science.gov (United States)

Shafie Sani, Mohd; Aziz, Faieza Abdul

2013-06-01

In this paper, several advanced manufacturing systems in food processing and packaging industry are reviewed, including: biodegradable smart packaging and Nano composites, advanced automation control system consists of fieldbus technology, distributed control system and food safety inspection features. The main purpose of current technology in food processing and packaging industry is discussed due to major concern on efficiency of the plant process, productivity, quality, as well as safety. These application were chosen because they are robust, flexible, reconfigurable, preserve the quality of the food, and efficient.

Assessment of Native Languages for Food Safety Training Programs for Meat Industry Employees

Science.gov (United States)

Olsen, Sherrlyn S.; Cordray, Joseph C.; Sapp, Stephen; Sebranek, Joseph G.; Anderson, Barbara; Wenger, Matt

2012-01-01

Challenges arise when teaching food safety to culturally diverse employees working in meatpacking and food manufacturing industries. A food safety training program was developed in English, translated into Spanish, and administered to 1,265 adult learners. Assessments were conducted by comparing scores before and immediately following training.…

A hierarchical factor analysis of a safety culture survey.

Science.gov (United States)

Frazier, Christopher B; Ludwig, Timothy D; Whitaker, Brian; Roberts, D Steve

2013-06-01

Recent reviews of safety culture measures have revealed a host of potential factors that could make up a safety culture (Flin, Mearns, O'Connor, & Bryden, 2000; Guldenmund, 2000). However, there is still little consensus regarding what the core factors of safety culture are. The purpose of the current research was to determine the core factors, as well as the structure of those factors that make up a safety culture, and establish which factors add meaningful value by factor analyzing a widely used safety culture survey. A 92-item survey was constructed by subject matter experts and was administered to 25,574 workers across five multi-national organizations in five different industries. Exploratory and hierarchical confirmatory factor analyses were conducted revealing four second-order factors of a Safety Culture consisting of Management Concern, Personal Responsibility for Safety, Peer Support for Safety, and Safety Management Systems. Additionally, a total of 12 first-order factors were found: three on Management Concern, three on Personal Responsibility, two on Peer Support, and four on Safety Management Systems. The resulting safety culture model addresses gaps in the literature by indentifying the core constructs which make up a safety culture. This clarification of the major factors emerging in the measurement of safety cultures should impact the industry through a more accurate description, measurement, and tracking of safety cultures to reduce loss due to injury. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

Energy taxation in a small, open economy: Social efficiency gains versus industrial concerns

International Nuclear Information System (INIS)

Bjertnaes, Geir H.; Faehn, Taran

2008-01-01

Welfare analyses of energy taxes typically show that systems with uniform rates perform better than differentiated systems, especially if revenue can be recycled by cutting taxes that are more distortionary. However, in practical policy, efficiency gains must be traded off against industrial concerns. Presumably, energy-dependent industries of small, open economies will suffer relatively more if taxed. This computable general equilibrium (CGE) study examines the social costs of compensating the energy-intensive export industries in Norway for their profit losses from imposing the same electricity tax on all industries. The costs are surprisingly modest. This is explained by the role of the Nordic electricity market, which is still limited enough to respond to national energy tax reforms. Thus, an electricity price reduction partly neutralizes the direct impact of the tax on profits. In addition, we examine the effects of different compensation schemes and find significantly lower compensation costs when the scheme is designed to release productivity gains. (author)

Occupational Safety and Health Concerns in Logging: A Cross-Sectional Assessment in Virginia

Directory of Open Access Journals (Sweden)

Sunwook Kim

2017-11-01

Full Text Available Increased logging mechanization has helped improve logging safety and health, yet related safety risks and concerns are not well understood. A cross-sectional study was completed among Virginia loggers. Participants (n = 122 completed a self-administered questionnaire focusing on aspects of safety and health related to logging equipment. Respondents were at a high risk of workplace injuries, with reported career and 12-month injury prevalences of 51% and 14%, respectively. Further, nearly all (98% respondents reported experiencing musculoskeletal symptoms. Over half (57.4% of respondents reported symptoms related to diesel exhaust exposure in their career. Few (15.6%, however, perceived their jobs to be dangerous. Based on the opinions and suggestions of respondents, three priority areas were identified for interventions: struck-by/against hazards, situational awareness (SA during logging operations, and visibility hazards. To address these hazards, and to have a broader and more substantial positive impact on safety and health, we discuss the need for proactive approaches such as incorporating proximity technologies in a logging machine or personal equipment, and enhancing logging machine design to enhance safety, ergonomics, and SA.

Public meeting on radiation safety for industrial radiographerss: remarks, questions and answers at five NRC regional meetings

International Nuclear Information System (INIS)

1978-11-01

Over the past several years thenumber of radiation overexposures experienced in the radiography industry has been higher than for any other single group of NRC licensees. To inform radiography licensees of NRC's concern fo these recurring overexposure incidents, NRC staff representatives met with licensees in a series of five regional meetings. At these meetings the staff presented prepared remarks and answered questions on NRC regulations and operations. The main purposes of the meetings were to express NRC's concern for the high incidence of overexposures, and to open a line of communication between the NRC and radiography licensees in an effort to achieve the common goal of improved radiation safety. The remarks presented by the staff and subjects discussed at these meetings included: the purpose, scope, findings and goals of the NRC inspection program; ways and means of incorporating safety into radiography operations; and case histories of overexposure incidents, with highlights of the causes and possible preventions. At each of the regional meetings the staff received a request for a copy of the prepared remarks and a consolidation of the questions and answers that were discussed. This document includes that information, and a copy is being provided to each organizaion or firm attending the regional meetings. Requests for other copies should be made in accordance with the directions printed inside the front cover of this document

The Development of a Risk Management System in the Field of Industrial Safety in the Republic of Kazakhstan

Directory of Open Access Journals (Sweden)

Sergey S. Kudryavtsev

2018-03-01

Full Text Available Background: The purpose of the work is to develop a system that allows processing of information for analysis and industrial risk management, to monitor the level of industrial safety and to perform necessary measures aimed at the prevention of accidents, casualties, and development of professional diseases for effective management of industrial safety at hazardous industrial sites. Methods: Risk assessment of accidents and incidents is based on expert evaluations. Based on the lists of criteria parameters and their possible values, provided by the experts, a unified information and analytical database is compiled, which is included in the final interrogation questionnaires. Risk assessment of industrial injuries and occupational diseases is based on statistical methods. Results: The result of the research is the creation of Guidelines for risk management on hazardous industrial sites of the Republic of Kazakhstan. The Guidelines determine the directions and methods of complex assessment of the state of industrial safety and labor protection and they could be applied as methodological basis at the development of preventive measures for emergencies, casualties, and incidents at hazardous industrial sites. Conclusion: Implementation of the information-analytical system of risk level assessment allows to analyze the state of risk of a possible accident at industrial sites, make valid management decisions aimed at the prevention of emergencies, and monitor the effectiveness of accident prevention measures. Keywords: industrial safety, industrial trauma, professional sickness rate, risk assessment, risk management

Industrial Safety and Applied Health Physics Division, annual report for 1982

International Nuclear Information System (INIS)

1983-12-01

Activities during the past year are summarized for the Health Physics Department, the Environmental Management Department, and the Safety Department. The Health Physics Department conducts radiation and safety surveys, provides personnel monitoring services for both external and internal radiation, and procures, services, and calibrates appropriate portable and stationary health physics instruments. The Environmental Management Department insures that the activities of the various organizations within ORNL are carried out in a responsible and safe manner. This responsibility involves the measurement, field monitoring, and evaluation of the amounts of radionuclides and hazardous materials released to the environment and the control of hazardous materials used within ORNL. The department also collaborates in the design of ORNL Facilities to help reduce the level of materials released to the environment. The Safety Department is responsible for maintaining a high level of staff safety. This includes aspects of both operational and industrial safety and also coordinates the activities of the Director's Safety Review Committee

Industrial Safety and Applied Health Physics Division, annual report for 1982

Energy Technology Data Exchange (ETDEWEB)

1983-12-01

Activities during the past year are summarized for the Health Physics Department, the Environmental Management Department, and the Safety Department. The Health Physics Department conducts radiation and safety surveys, provides personnel monitoring services for both external and internal radiation, and procures, services, and calibrates appropriate portable and stationary health physics instruments. The Environmental Management Department insures that the activities of the various organizations within ORNL are carried out in a responsible and safe manner. This responsibility involves the measurement, field monitoring, and evaluation of the amounts of radionuclides and hazardous materials released to the environment and the control of hazardous materials used within ORNL. The department also collaborates in the design of ORNL Facilities to help reduce the level of materials released to the environment. The Safety Department is responsible for maintaining a high level of staff safety. This includes aspects of both operational and industrial safety and also coordinates the activities of the Director's Safety Review Committee. (ACR)

Quality management of personnel in the nuclear industry: the human factor

International Nuclear Information System (INIS)

Tyror, J.G.

1990-01-01

The importance of research into understanding how plant operators can affect plant performance and plant safety is stressed in this general overview of the topic presented as an introduction to the conference. Three main interests are mentioned. The first concerns the relationship between the quality audit and the more specific issue of quality management as addressed by the safety audit. The second is safety and the link between safety, quality management and people which is shown by analysis of accidents in the industry. The third concern is the extent to which human failures are attributable to management systems and procedures rather than individual failings. (UK)

The Development of a Risk Management System in the Field of Industrial Safety in the Republic of Kazakhstan

OpenAIRE

Sergey S. Kudryavtsev; Pavel V. Yemelin; Natalya K. Yemelina

2018-01-01

Background: The purpose of the work is to develop a system that allows processing of information for analysis and industrial risk management, to monitor the level of industrial safety and to perform necessary measures aimed at the prevention of accidents, casualties, and development of professional diseases for effective management of industrial safety at hazardous industrial sites. Methods: Risk assessment of accidents and incidents is based on expert evaluations. Based on the lists of crite...

Nanotechnology in food science: Functionality, applicability, and safety assessment.

Science.gov (United States)

He, Xiaojia; Hwang, Huey-Min

2016-10-01

Rapid development of nanotechnology is expected to transform many areas of food science and food industry with increasing investment and market share. In this article, current applications of nanotechnology in food systems are briefly reviewed. Functionality and applicability of food-related nanotechnology are highlighted in order to provide a comprehensive view on the development and safety assessment of nanotechnology in the food industry. While food nanotechnology offers great potential benefits, there are emerging concerns arising from its novel physicochemical properties. Therefore, the safety concerns and regulatory policies on its manufacturing, processing, packaging, and consumption are briefly addressed. At the end of this article, the perspectives of nanotechnology in active and intelligent packaging applications are highlighted. Copyright © 2016. Published by Elsevier B.V.

Effectiveness of video-assisted teaching program on safety measures followed by the employees working in the silica-based industry in Puducherry, India.

Science.gov (United States)

Nanthini, Thiruvengadam; Karunagari, Karaline

2016-01-01

Employees constitute a large and important sector of the world's population. The global labor force is about 2,600 million and 75% of this force is working in developing countries. Occupational health and safety (OHS) must be managed in every aspect of their work. Occupational safety and health (OSH), also commonly referred to as OHS or workplace health and safety (WHS) is an area concerned with the safety, health, and welfare of people engaged in any employment. The goal of OSH is to foster a safe and healthy work environment. The aim of this study is to evaluate the effectiveness of video-assisted teaching program on safety measures. A total of 105 employees were selected from M/s ACE Glass Containers Ltd. at Puducherry, India using the convenience sampling technique. Pretest was conducted using a self-administered questionnaire. Subsequent video-assisted teaching was conducted by the investigator after which posttest was conducted. Video-assisted teaching program was found to be effective in improving the knowledge, attitude, and practice of the subjects. Periodical reorientation on safety measures are needed for all the employees as it is essential for promoting the well-being of employees working in any industry.

Enacting laws concerning radiation safety management for students using X-rays and electron beams under 1 MeV

International Nuclear Information System (INIS)

Nishizawa, Kunihide; Shibata, Michihiro; Saze, Takuya

2004-01-01

Laws concerning radiation safety management were analyzed from the point of view of defining precisely what is meant by radiation and what is meant by the subject. There are no laws to protect students from radiation hazards when using X-rays and electron beams under 1 MeV for research and/or education. The Law concerning Technical Standards for Preventing Radiation Hazards gives the authorities the power to enact new rules and regulations that will protect the students. The Radiation Council must take charge for enactment of all laws regarding radiation safety management. (author)

Decree no. 81-730 of 30 July 1981 concerning the responsibilities of the Minister of Industry

International Nuclear Information System (INIS)

1981-01-01

This Decree, which determines the competence of the Minister of Industry, provides that he shall discharge the duties previously given to the Minister of Industry by Decree No. 78-593 of 16 May 1978, with the exception of the responsibilities transferred to the Minister for Research and Technology by Decree No. 81-723 of 28 July 1981. He determines, proposes and implements, in liaison with the Ministers concerned, the Government's policy in industrial development, energy and source materials. (NEA) [fr

OECD/NEA WGFCS Workshop: Safety Assessment of Fuel Cycle Facilities - Regulatory Approaches and Industry Perspectives

International Nuclear Information System (INIS)

2013-01-01

Nuclear fuel is produced, processed, and stored mainly in industrial-scale facilities. Uranium ores are processed and refined to produce a pure uranium salt stream, Uranium is converted and enriched, nuclear fuel is fabricated (U fuel and U/Pu fuel for the closed cycle option); and spent fuel is stored and reprocessed in some countries (close cycle option). Facilities dedicated to the research and development of new fuel or new processes are also considered as Fuel Cycle Facilities. The safety assessment of nuclear facilities has often been led by the methodology and techniques initially developed for Nuclear Power Plants. As FCFs cover a wide diversity of installations the various approaches of national regulators, and their technical support organizations, for the Safety Assessment of Fuel Cycle Facilities are also diverse, as are the approaches by their industries in providing safety justifications for their facilities. The objective of the Working Group on Fuel Cycle Safety is to advance the understanding for both regulators and operators of relevant aspects of nuclear fuel cycle safety in member countries. A large amount of experience is available in safety assessment of FCFs, which should be shared to develop ideas in this field. To contribute to this task, the Workshop on 'Safety Assessment of Fuel Cycle Facilities - Regulatory Approaches and Industry Perspectives' was held in Toronto, on 27 - 29 September 2011. The workshop was hosted by Canadian Nuclear Safety Commission. The current proceedings provide summary of the results of the workshop with the text of the papers given and presentations made

Safety and security of radioactive sources in industrial radiography in Bangladesh

Energy Technology Data Exchange (ETDEWEB)

Mollah, A. S.; Nazrul, M. Abdullah [Industrial Inspection Service Limited, Dhaka (Bangladesh)

2013-07-01

Malicious use of radioactive sources can involve dispersal of that material through an explosive device. There has been recognition of the threat posed by the potential malicious misuse of NDT radioactive source by terrorists. The dispersal of radioactive material using conventional explosives, referred to as a 'dirty bomb', could create considerable panic, disruption and area access denial in an urban environment. However, as it is still a relatively new topic among regulators, users, and transport and storage operators worldwide, international assistance and cooperation in developing the necessary regulatory and security infrastructure is required. The most important action in reducing the risk of radiological terrorism is to increase the security of radioactive sources. This paper presents safety and security considerations for the transport and site storage of the industrial radiography sources as per national regulations entitled 'Nuclear Safety and Radiation Control Rules-1997'.The main emphasis was put on the stages of some safety and security actions in order to prevent theft, sabotage or other malicious acts during the transport of the packages. As a conclusion it must be mentioned that both safety and security considerations are very important aspects that must be taking in account for the transport and site storage of radioactive sources used in the practice of industrial radiography. (authors)

Safety and security of radioactive sources in industrial radiography in Bangladesh

International Nuclear Information System (INIS)

Mollah, A. S.; Nazrul, M. Abdullah

2013-01-01

Malicious use of radioactive sources can involve dispersal of that material through an explosive device. There has been recognition of the threat posed by the potential malicious misuse of NDT radioactive source by terrorists. The dispersal of radioactive material using conventional explosives, referred to as a 'dirty bomb', could create considerable panic, disruption and area access denial in an urban environment. However, as it is still a relatively new topic among regulators, users, and transport and storage operators worldwide, international assistance and cooperation in developing the necessary regulatory and security infrastructure is required. The most important action in reducing the risk of radiological terrorism is to increase the security of radioactive sources. This paper presents safety and security considerations for the transport and site storage of the industrial radiography sources as per national regulations entitled 'Nuclear Safety and Radiation Control Rules-1997'.The main emphasis was put on the stages of some safety and security actions in order to prevent theft, sabotage or other malicious acts during the transport of the packages. As a conclusion it must be mentioned that both safety and security considerations are very important aspects that must be taking in account for the transport and site storage of radioactive sources used in the practice of industrial radiography. (authors)

ENSI’s synopsis concerning the enhancement of safety margins; Zusammenfassung des ENSI zur Erhöhung der Sicherheitsmargen

Energy Technology Data Exchange (ETDEWEB)

NONE

2015-06-15

This press release issued by the Swiss Federal Nuclear Safety Inspectorate ENSI discusses the results of its probabilistic safety analysis on the safety margins for Swiss nuclear power stations that was made after the Fukushima nuclear accident. External incidents such as earthquakes and flooding and their impact on the power stations are analysed by the ERSIM project concerning the enhancement of safety margins. Three shut-down scenarios are discussed. The safety margins with respect to earthquakes and flooding for all four nuclear power station sites are discussed in detail.

Government/Industry Partnership on the Security of Radioactive Sources

International Nuclear Information System (INIS)

Cefus, Greg; Colhoun, Stefan C.; Freier, Keith D.; Wright, Kyle A.; Herdes, Gregory A.

2006-01-01

In the past, industry radiation protection programs were built almost exclusively around radiation safety and the minimization of radiation dose exposure to employees. Over the last decade, and especially the last few years, the emphasis has shifted to include the physical security and enhanced control of radioactive materials. The threat of nuclear and radiological terrorism is a genuine international security concern. In May 2004, the U.S. Department of Energy/U.S. National Nuclear Security Administration unveiled the Global Threat Reduction Initiative (GTRI) to respond to a growing international concern for the proper control and security of radioactive and nuclear materials. An integral part of the GTRI, the International Radiological Threat Reduction (IRTR) Program, was established in February 2002, originally as a Task Force. The IRTR Program is foremost a government-to-government cooperative program with the mission to reduce the risk posed by vulnerable radioactive materials that could be used in a Radioactive Dispersal Device (RDD). However, governments alone cannot prevent the misuse and illicit trafficking of radioactive sources. By expanding the role of private industry as a partner, existing government regulatory infrastructures can be enhanced by formulating and adopting industry self-regulation and self-policing measures. There is international concern regarding the security and control of the vast number of well-logging sources used during oil exploration operations. The prevalence of these sources, coupled with their portability, is a legitimate security concern. The energy exploration industry has well established safety and security protocols and the IRTR Program seeks to build on this foundation. However, the IRTR Program does not have sufficient resources to address the issue without industry assistance, so it is looking to the oil and gas industry to help identify alternative means for accomplishing our mutual objectives. This paper describes

Factors to Consider When Balancing Campus Safety Concerns with Students' Civil Rights

Science.gov (United States)

Ingersoll, Julia S.

2017-01-01

On April 16, 2007, a student at Virginia Tech University, known to be mentally ill, went on a rampage shooting 49 people on campus before taking his own life. When it was over, 32 people were dead, and the concept of a safe campus was forever changed. The incident revealed the inherent conflicts between campus safety concerns and students' civil…

Rising to the challenge: addressing the concerns of people working in the sex industry.

Science.gov (United States)

Shaver, Frances M; Lewis, Jacqueline; Maticka-Tyndale, Eleanor

2011-02-01

In September 2010, three Canadian Criminal Code provisions related to prostitution were ruled unconstitutional because they increase the risk of harm to people working in the sex industry (PWSI). Using data from studies with PWSI and key informants conducted in several Canadian cities, we examine three domains related to worker health and safety: occupational health and safety, perceptions of and behaviors toward workers, and access to essential services. Addressing these issues necessitates moving beyond decriminalization. We conclude that using a harm reduction/labor rights framework would enhance our ability to address issues related to the physical, social, and mental well-being as well as rights of PWSI.

Safety climate mapping in a nuclear power plant - an experience sharing

International Nuclear Information System (INIS)

Vincy, M.U.; Varshney, Aloke; Khot, Pankaj

2016-01-01

In this paper the author discusses the experience gained in safety climate measurement of an Indian nuclear power plant. Safety performance is increasingly part of an organisation's sustainable development. Nuclear power stations are falling under the category 'high reliability' industries in the world as far as work safety is concerned. Both the research and the practical experience continually point to two underlying factors that drive safety outcomes: the quality of an organisation's leadership and the resulting culture. After years of development in safety technology and safety management system in the industry, management of nuclear industry world over has come to recognize that safety culture has to be addressed if high standards of health and safety are to be maintained. Therefore, nuclear industries in India have been carrying out measurement of safety climate for more than ten years. The objectives of the study are to examine people's values, attitude, perception, competencies, and patterns of behaviour that determine the commitment to, and effectiveness of health and safety management in the industry based on questionnaires survey and their analysis. A questionnaire, consists of 66 statements with 11 attributes, was designed to seek the views of managers, supervisors and front line workers on key aspects of the safety culture. Each of the discrete group was also classified according to their role in the organisation

Squale: evaluation criteria of functioning safety

International Nuclear Information System (INIS)

Deswarte, Y.; Kaaniche, M.; Benoit, P.

1998-05-01

The SQUALE (security, safety and quality evaluation for dependable systems) project is part of the ACTS (advanced communications, technologies and services) European program. Its aim is to develop confidence evaluation criteria to test the functioning safety of systems. All industrial sectors that use critical applications (nuclear, railway, aerospace..) are concerned. SQUALE evaluation criteria differ from the classical evaluation methods: they are independent of the application domains and industrial sectors, they take into account the overall functioning safety attributes, and they can progressively change according to the level of severity required. In order to validate the approach and to refine the criteria, a first experiment is in progress with the METEOR automatic underground railway and another will be carried out on a telecommunication system developed by Bouygues company. (J.S.)

Reactor safety research - visible demonstrations and credible computations

Energy Technology Data Exchange (ETDEWEB)

Loewenstein, W B; Divakaruni, S M

1985-11-01

EPRI has been conducting nuclear safety research for a number of years with the primary goal of assuring the safety and reliability of the nuclear plants. The visibility is emphasized by sponsoring or participating in large scale test demonstrations to credibly support the complex computations that are the basis for quantification of safety margins. Recognizing the success of the airline industry in receiving favorable public perception, the authors compare the design and operation practices of the airline industry with those of the nuclear industry practices to identify the elements contributing to public concerns and unfavorable perceptions. In this paper, authors emphasize the importance of proper communications of research results to the public in a manner that non-specialists understand. Further, EPRI supported research and results in the areas of source term, seismic and structural engineering research, analysis using probabilistic risk assessment (PRA), quantification of safety margins, digital technology development and implementation, and plant transient and performance evaluations are discussed in the paper. (orig./HP).

Reactor safety research - visible demonstrations and credible computations

International Nuclear Information System (INIS)

Loewenstein, W.B.; Divakaruni, S.M.

1985-01-01

EPRI has been conducting nuclear safety research for a number of years with the primary goal of assuring the safety and reliability of the nuclear plants. The visibility is emphasized by sponsoring or participating in large scale test demonstrations to credibly support the complex computations that are the basis for quantification of safety margins. Recognizing the success of the airline industry in receiving favorable public perception, the authors compare the design and operation practices of the airline industry with those of the nuclear industry practices to identify the elements contributing to public concerns and unfavorable perceptions. In this paper, authors emphasize the importance of proper communications of research results to the public in a manner that non-specialists understand. Further, EPRI supported research and results in the areas of source term, seismic and structural engineering research, analysis using probabilistic risk assessment (PRA), quantification of safety margins, digital technology development and implementation, and plant transient and performance evaluations are discussed in the paper. (orig./HP)

The root cause of patient safety concerns in an Internet pharmacy.

Science.gov (United States)

Montoya, Isaac D

2008-07-01

The Internet has become a revolutionary technology that affords worldwide opportunities never seen before. One such opportunity is the purchase of drugs over the Internet and the business of Internet pharmacies which has become prolific. Associated with this proliferation is the concern for patient safety. Numerous studies have shown that drugs purchased over the Internet come from pharmacies in a country other than the one where the patient resides and these pharmacies are not licensed, sometimes provide drugs without a prescription and that are not of the same composition as they should be, and do not provide adequate directions to the patient. In addition, the packaging of the drugs may be compromised resulting in altered medication. This paper examines the root cause of patient safety issues in Internet pharmacies. A review of the literature including the marketing literature was conducted. Healthcare marketing concepts guide business owners to identify patients' wants and distinguish them from their needs. Marketing principles detail aggressive marketing strategies within an organization's mission and in an ethical manner. Some Internet pharmacies misinterpret proven marketing principles and become overly aggressive in the market place focusing only on sales and profit rather than focusing on patient safety and long-term success of the Internet pharmacy.

IMPLEMENTATION OF A SAFETY PROGRAM FOR THE WORK ACCIDENTS’ CONTROL. A CASE STUDY IN THE CHEMICAL INDUSTRY

Directory of Open Access Journals (Sweden)

Edison Cesar de Faria Nogueira

2015-03-01

Full Text Available This article presents a case study related to the implementation of a Work Safety Program in a chemical industry, based on the Process Safety Program, PSP, of a huge energy company. The research was applied, exploratory, qualitative and with and data collection method through documentary and bibliographical research. There will be presented the main practices adopted in order to make the Safety Program a reality inside a chemical industry, its results and contributions for its better development. This paper proposes the implementation of a Safety Program must be preceded by a diagnosis of occupational safety and health management system and with constant critical analysis in order to make the necessary adjustments.

Safety performance evaluation using proactive indicators in a selected industry

Directory of Open Access Journals (Sweden)

Abolfazl Barkhordari

2015-03-01

Full Text Available Background & Objectives: Quality and effectiveness of safety systems are critical factors in achieving their goals. This study was aimed to represent a method for performance evaluation of safety systems by proactive indicators using different updated models in the field of safety which will be tested in a selected industry. Methods: This study is a cross-sectional study. Proactive indicators used in this study were: Unsafe acts rate, Safety Climate, Accident Proneness, and Near-miss incident rate. The number of in 1473 safety climate questionnaires and 543 Accident Proneness questionnaires was completed. Results: The minimum and maximum safety climate score were 56.88 and 58.2, respectively, and the minimum and maximum scores of Accident Proneness were 98.2 and 140.7, respectively. The maximum number of Near-miss incident rate were 408 and the minimum of that was 196. The maximum number of unsafe acts rate was 43.8 percent and the minimum of that was 27.2 percent. In nine dimensions of Safety climate the eighth dimension (personal perception of risk with the score of 4.07 has the lowest score and the fourth (laws and safety regulations dimension with 8.05 has the highest score. According to expert opinions, the most important indicator in the assessment of safety performance was unsafe acts rate, while near-miss incident rate was the least important one. Conclusion: The results of this survey reveal that using proactive (Prospective indicators could be an appropriate method in organizations safety performance evaluation.

Stress Tests Worldwide - IAEA Nuclear Safety Action Plan

International Nuclear Information System (INIS)

Lyons, J.E.

2012-01-01

The IAEA nuclear safety action plan relies on 11 important issues. 1) Safety assessments in light of the Fukushima accident: the IAEA secretariat will develop a methodology for stress tests against specific extreme natural hazards and will provide assistance for their implementation; 2) Strengthen existing IAEA peer reviews; 3) Emergency preparedness and response; 4) National Regulatory bodies in terms of independence and adequacy of human and financial resources; 5) The development of safety culture and scientific and technical capacity in Operating Organizations; 6) The upgrading of IAEA safety standards in a more efficient way; 7) A better implementation of relevant conventions concerning nuclear safety and nuclear accidents; 8) To provide a broad assistance on safety standard for countries embarking on a nuclear power program; 9) To facilitate the use of available information, expertise and techniques concerning radiation protection; 10) To enhance the transparency of nuclear industry; and 11) To promote the cooperation between member states in nuclear safety. (A.C.)

A Review of the Poultry Meat Production Industry for Food Safety in Indonesia

Science.gov (United States)

Wahyono, N. D.; Utami, M. M. D.

2018-01-01

Poultry meat is an indispensable source of animal protein in human growth and development, so it is in great demand by people all over the world. Poultry meat has several advantages, namely the quality of nutrition is good enough, delicious taste, relatively affordable price, easy to get and accepted all levels of society with diverse backgrounds. The era of globalization requires competitive products, such as chicken meat in Indonesia, the current chicken meat industry is not only based on high production capacity and decreased production costs but also chicken products are safe to eat. As a consequence of trade liberalization, the poultry industry faces the threat of competition with cheaper products with better quality. The food safety of chicken meat starts from the farm, processing process until consumed. Food safety is a requirement of food products that must be handled by involving government, industry and consumers.

Safety management: a few techniques and their application

International Nuclear Information System (INIS)

Soundararajan, S.

2016-01-01

Industrial safety practice has grown in its stature tremendously since the age of industrial revolution. A number of modern techniques are available to strengthen design safety features, to review operational safety, and to critically appraise and upgrade practices of occupational safety and health management. This talk focuses on three prominent yet simple techniques and their usefulness in the overall safety management of a workplace. Any industrial set-up undergoes different stages in its life cycle-conceptual design, actual design, construction, fabrication and installation, commissioning, operation, shutdown/re-start up and decommissioning. Checklist procedure is a safety tool that can be applied at any of these stages. Thus it is a quite useful technique in safety management and accident prevention. It can serve as a form of approval from one step to another in the course of any routine or specific task. Safety Audit or Safety Review is a critical safety management appraisal tool. It gives a reasonable indication of how well a company's safety programme works, how hazards are recognised, how well employees are motivated and so on. It gives a clear picture about where a company stands as far as framing and implementation of its SHE policy is concerned. Each of the above tools is complementing each other and required to be applied at appropriate juncture in sustaining good safety management system at the workplace

Transactions of the twenty-fifth water reactor safety information meeting

Energy Technology Data Exchange (ETDEWEB)

Monteleone, S. [comp.

1997-09-01

This report contains summaries of papers on reactor safety research to be presented at the 25th Water Reactor Safety Information Meeting at the Bethesda Marriott Hotel in Bethesda, Maryland, October 20--22, 1997. The summaries briefly describe the programs and results of nuclear safety research sponsored by the Office of Nuclear Regulatory Research, US NRC. Summaries of invited papers concerning nuclear safety issues from US government laboratories, the electric utilities, the nuclear industry, and from foreign governments and industry are also included. The summaries have been compiled in one report to provide a basis for meaningful discussion of information exchanged during the course of the meeting, and are given in order of their presentation in each session.

Transactions of the twenty-fifth water reactor safety information meeting

International Nuclear Information System (INIS)

Monteleone, S.

1997-09-01

This report contains summaries of papers on reactor safety research to be presented at the 25th Water Reactor Safety Information Meeting at the Bethesda Marriott Hotel in Bethesda, Maryland, October 20--22, 1997. The summaries briefly describe the programs and results of nuclear safety research sponsored by the Office of Nuclear Regulatory Research, US NRC. Summaries of invited papers concerning nuclear safety issues from US government laboratories, the electric utilities, the nuclear industry, and from foreign governments and industry are also included. The summaries have been compiled in one report to provide a basis for meaningful discussion of information exchanged during the course of the meeting, and are given in order of their presentation in each session

Institutional failure: are safety management systems the answer?

Energy Technology Data Exchange (ETDEWEB)

Waddington, J.G.; Lafortune, J.F. [International Safety Research, Ottawa, Ontario (Canada); Duffey, R.B. [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada)

2009-07-01

In spite of an overwhelming number of safety management programs, incidents and accidents that could seemingly, in hindsight, have been prevented, still occur. Institutional failure is seen as a major contributor in almost all cases. With the anticipated significant increase in the number of nuclear plants around the world, a drastic step in the way we manage safety is deemed essential to further reduce the currently already very low rate of accidents to levels that will not cause undue public concern and threaten the success of the nuclear 'renaissance'. To achieve this, many industries have already started implementing a Safety Management System (SMS) approach, aimed at harmonizing, rationalizing and integrating management processes, safety culture and operational risk assessment. This paper discusses the origins and the nature of SMS based in part on the experience of the aviation industry, and shows how SMS is poised to be the next generation in the way the nuclear industry manages safety. It also discusses the need for better direct measures of risk to demonstrate the success of SMS implementation. (author)

Institutional failure: are safety management systems the answer?

International Nuclear Information System (INIS)

Waddington, J.G.; Lafortune, J.F.; Duffey, R.B.

2009-01-01

In spite of an overwhelming number of safety management programs, incidents and accidents that could seemingly, in hindsight, have been prevented, still occur. Institutional failure is seen as a major contributor in almost all cases. With the anticipated significant increase in the number of nuclear plants around the world, a drastic step in the way we manage safety is deemed essential to further reduce the currently already very low rate of accidents to levels that will not cause undue public concern and threaten the success of the nuclear 'renaissance'. To achieve this, many industries have already started implementing a Safety Management System (SMS) approach, aimed at harmonizing, rationalizing and integrating management processes, safety culture and operational risk assessment. This paper discusses the origins and the nature of SMS based in part on the experience of the aviation industry, and shows how SMS is poised to be the next generation in the way the nuclear industry manages safety. It also discusses the need for better direct measures of risk to demonstrate the success of SMS implementation. (author)

Identifying the Critical Factors Affecting Safety Program Performance for Construction Projects within Pakistan Construction Industry

Directory of Open Access Journals (Sweden)

Zubair Ahmed Memon

2013-04-01

Full Text Available Many studies have shown that the construction industry one of the most hazardous industries with its high rates of fatalities and injuries and high financial losses incurred through work related accident. To reduce or overcome the safety issues on construction sites, different safety programs are introduced by construction firms. A questionnaire survey study was conducted to highlight the influence of the Construction Safety Factors on safety program implementation. The input from the questionnaire survey was analyzed by using AIM (Average Index Method and rank correlation test was conducted between different groups of respondents to measure the association between different groups of respondent. The finding of this study highlighted that management support is the critical factor for implementing the safety program on projects. From statistical test, it is concluded that all respondent groups were strongly in the favor of management support factor as CSF (Critical Success Factor. The findings of this study were validated on selected case studies. Results of the case studies will help to know the effect of the factors on implementing safety programs during the execution stage.

Examination on the actual situation of safety measures for the gas used in semiconductor industry of U. S. A. Amerika no handotai kogyoyo gas no anzen taisaku no jitsujo wo mite

Energy Technology Data Exchange (ETDEWEB)

Horiguchi, S [National Inst. of Materials and Chemical Research, Tsukuba (Japan)

1993-06-15

In compliance with the request of the Compressed Gas Safety Association of Japan, the visits to the Department of Transportation (DOT), the Occupational Safety and Health Administration, Department of Labor (OSHA), which are the apparatus of government, the Compressed Gas Association (CGA), the makers of gas used in the semiconductor industry, the makers of cylinder cabinet, and the semiconductor manufacturing factories run by Japanese were made by the present authors in order to examine the actual situations of the safety measure to the gas used in semiconductor industry of U.S.A. In this paper, the viewpoints as well as the actual situation relating to the safety measure to the compressed gas in said visited apparatus and enterprises are introduced. Especially, a number of points which should be referred to are indicated that recently in America, the control of the dangerous materials are regulated rigorously due to the environmental problems, and additionally the files of material safety data sheet based on Hazard communication of OSHA are ranged in the passageways for being read freely, the certain safety educations are given to the employees in offices and the visiting traders or marketers concerned as the duty. 1 fig., 2 tabs.

TMI 2 and safety culture. Lessons still to be learned

International Nuclear Information System (INIS)

Werdine, H.

1998-01-01

This paper will deal with some concerns related to the actual ''status-quo'' of the nuclear industry related to nuclear safety. It is well understood that incredible progresses have been made in this subject not only by the industries, but mainly by the International Organisations such as INPO, WANO, IAEA and others. Of course, there could be some misunderstanding and corrections here and there, and now I am talking about the WANO Mission last year in Chernobyl. But this subject is not the objective of my paper. This paper deals with a concern. I am worried with the actual status of a ''potential relative'' complacency with some very important safety principles that could be permeating throughout the nuclear industry. I will try to develop this idea and propose some actions to counteract the facts; what we did at Angra 1 and within ELETRONUCLEAR to face those challenges. (author)

Parental safety concerns--a barrier to sport and physical activity in children?

Science.gov (United States)

Boufous, Soufiane; Finch, Caroline; Bauman, Adrian

2004-10-01

To examine the extent to which parents and carers perceive injury and safety risks as serious enough to prevent or discourage their children, aged 5-12 years, from participating in sports/physical activity and to identify factors that influence these perceptions. An analysis of the 2001 New South Wales Child Health Survey. More than one-quarter of parents/ carers of active children aged 5-12 years reported discouraging or preventing children from playing a particular sport (34.7% for boys and 16.6% for girls) because of injury and safety concerns. In boys, the most frequently discouraged sport was rugby league (23.2%), followed by rugby union (7.5%) and Australian rules football (2.8%). Among girls, the most frequently discouraged activities were rollerblading (2.7%), rugby league (2.3%) and soccer (2.1%). Multivariate analysis shows that factors independently associated with parents' decision to prevent/discourage their child from engaging in sport/physical activity include their child's age and gender, language spoken at home, presence of disability, and the respondent's relation to the child. Efforts need to be made to modify some sports/ activities, such as football codes, in order to minimise injury and to ensure that children continue enjoying their favourite activity well into adulthood. Guidelines designed to promote physical activity among children and young adolescents need to take into account parental concerns regarding the associated risk of injury.

Rent-seeking mechanism for safety supervision in the Chinese coal industry based on a tripartite game model

International Nuclear Information System (INIS)

Chen, Hong; Feng, Qun; Cao, Jing

2014-01-01

There are extensive governmental rent-seeking activities in safety supervision of the Chinese coal industry. The rents come from industry safety barriers, low resource taxes, and privilege policies for coalmining enterprises. The rent-seeking mechanism was analyzed using a model comprising dynamic games with incomplete information. The equilibrium results indicate that the probability of national supervision is influenced by penalties and bribery: there is negative correlation with penalties and positive correlation with bribery. The rent-seeking probability of a governmental safety supervision department is influenced by several factors, and positively correlates with the cost of national supervision. The probability of bribery of coalmining enterprises is influenced by several factors, and positively correlates with wages of governmental departments and a reasonable rent-seeking range. Reversed rent-seeking reduces the probability of bribery, but it's not worth recommending. Some recommendations are proposed. - Highlights: • We analyze rent-seeking mechanism for safety supervision in the coal industry. • A dynamic game with incomplete information for Chinese coal industry is built. • Reversed rent-seeking is proposed as a new rent-seeking form. • We analyze the selection probability of the three participants. • We give some policies about how to enhance safety supervision

Evaluation of radiological safety conditions of panoramic portable irradiators of industrial radiography used in Brazil

International Nuclear Information System (INIS)

Aquino, Josilto Oliveira de

2003-08-01

In Brazil, the applications of ionizing radiation in industrial area are performed in about 900 installations, in which around 3000 radioactive sources are handled. Industrial radiography represents 14 % of this total, with 217 X rays equipment and 287 gamma radiography apparatus, according to a survey conducted in the present work. From these gamma apparatus, 90 % employ 192 Ir sources, followed by 60 Co and 75 Se, with 5 % each. The great majority of the 192 Ir apparatus have been in continuous usage in Brazil for more than 20 years, which means that they are old equipment. The totality of the 11 models of 192 Ir apparatus used in Brazil is imported from abroad. Those apparatus are portable, and almost all operate according to category II, i.e., the source assembly is mechanically projected out of the container. This last characteristic, besides the fact that the apparatus are already old-fashioned and worn-out, raises concerns about their radiological safety. The main objective of this work was to develop a specific methodology for inspection, testing and assessment of the radiological safety devices and state of maintenance of the 192 Ir apparatus. The idea is to prevent accidents, as physical failures can lead to overexposure of working staffs. In order to accomplish this, almost a hundred 192 Ir apparatus, from the 11 models used in Brazil, were studied. According to our results, almost 20 % of the 97 apparatus evaluated presented some kind of unsafe condition for proper operation, like poor state of maintenance and faults at the lock that retains the source at the secure position. From the 11 imported models of 192 Ir apparatus in use in Brazil, six models were already manufactured incorporating the safety devices specified by the first edition of the Standard ISO 3999, edited in 1977. However, five models do not comply even with this first edition of the Standard ISO 3999. Thus, they lack some important and basic safety devices. None of the 11 models comply

Presentations of the PTAC driving safety technology forum

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

Issues concerning road safety and driver training in relation to the petroleum industry were the focus of this conference. The results of a driving safety survey from the Petroleum Technology Alliance Canada were presented. High risk driver identification methods were discussed along with coaching case studies, including details of continuous and advanced driver training by various industry members. Road hazard analysis was discussed as an effective means of reducing vehicular incidents. The dangers posed by cell phones were reviewed, as well as issues concerning motor vehicle event data recorders and personal privacy. The safety aspects of global positioning system (GPS) enabled fleet management systems were evaluated. Tactical plans for Alberta's traffic collision fatality and injury reduction strategy were examined. An overview of the Schlumberger Canada Driving Program was presented. The systems and processes used within Halliburton Canada to reinforce safe driving behaviors were reviewed. Real time personnel monitoring was discussed, as well as various asset management technologies. It was suggested that new communications technologies for mobile resource management can improve oilfield fleet safety and productivity. The forum featured 12 presentations, of which 8 have been catalogued separately for inclusion in this database.

Systematic impact of institutional pressures on safety climate in the construction industry.

Science.gov (United States)

He, Qinghua; Dong, Shuang; Rose, Timothy; Li, Heng; Yin, Qin; Cao, Dongping

2016-08-01

This paper explores how three types of institutional pressure (i.e., coercive, mimetic and normative pressures) systematically impact on the safety climate of construction projects. These impacts are empirically tested by survey data collected from 186 questionnaires of construction companies operating in Shanghai, China. The results, obtained by partial least squares analysis, show that organizational management commitment to safety and employee involvement is positively related to all three institutional pressures, while the perception of responsibility for safety and health is significantly influenced by coercive and mimetic pressure. However, coercive and normative pressures have no significant effect on the applicability of safety rules and work practices, revealing the importance of external organizational pressures in improving project safety climate from a systematic view. The findings also provide insights into the use of institutional forces to facilitate the improvement of safety climate in the construction industry. Copyright © 2015 Elsevier Ltd. All rights reserved.

Application of the threshold of toxicological concern (TTC) to the safety evaluation of cosmetic ingredients

NARCIS (Netherlands)

Kroes, R.; Renwick, A.G.; Feron, V.; Galli, C.L.; Gibney, M.; Greim, H.; Guy, R.H.; Lhuguenot, J.C.; Sandt, J.J.M. van de

2007-01-01

The threshold of toxicological concern (TTC) has been used for the safety assessment of packaging migrants and flavouring agents that occur in food. The approach compares the estimated oral intake with a TTC value derived from chronic oral toxicity data for structurally-related compounds.

Pretreatment technologies for industrial effluents: Critical review on bioenergy production and environmental concerns.

Science.gov (United States)

Prabakar, Desika; Suvetha K, Subha; Manimudi, Varshini T; Mathimani, Thangavel; Kumar, Gopalakrishnan; Rene, Eldon R; Pugazhendhi, Arivalagan

2018-07-15

The implementation of different pretreatment techniques and technologies prior to effluent discharge is a direct result of the inefficiency of several existing wastewater treatment methods. A majority of the industrial sectors have known to cause severe negative effects on the environment. The five major polluting industries are the paper and pulp mills, coal manufacturing facilities, petrochemical, textile and the pharmaceutical sectors. Pretreatment methods have been widely used in order to lower the toxicity levels of effluents and comply with environmental standards. In this review, the possible environmental benefits and concerns of adopting different pretreatment technologies for renewable energy production and product/resource recovery has been reviewed and discussed. Copyright © 2018 Elsevier Ltd. All rights reserved.

Evaluating safety-critical organizations - emphasis on the nuclear industry

Energy Technology Data Exchange (ETDEWEB)

Reiman, Teemu; Oedewald, Pia (VTT, Technical Research Centre of Finland (Finland))

2009-04-15

An organizational evaluation plays a key role in the monitoring, as well as controlling and steering, of the organizational safety culture. If left unattended, organizations have a tendency to gradually drift into a condition where they have trouble identifying their vulnerabilities and mechanisms or practices that create or maintain these vulnerabilities. The aim of an organizational evaluation should be to promote increased understanding of the sociotechnical system and its changing vulnerabilities. Evaluation contributes to organizational development and management. Evaluations are used in various situations, but when the aim is to learn about possible new vulnerabilities, identify organizational reasons for problems, or prepare for future challenges, the organization is most open to genuine surprises and new findings. It is recommended that organizational evaluations should be conducted when - there are changes in the organizational structures - new tools are implemented - when the people report increased workplace stress or a decreased working climate - when incidents and near-misses increase - when work starts to become routine - when weak signals (such as employees voicing safety concerns or other worries, the organization 'feels' different, organizational climate has changed) are perceived. In organizations that already have a high safety level, safety managers work for their successors. This means that they seldom see the results of their successful efforts to improve safety. This is due to the fact that it takes time for the improvement to become noticeable in terms of increased measurable safety levels. The most challenging issue in an organizational evaluation is the definition of criteria for safety. We have adopted a system safety perspective and we state that an organization has a high potential for safety when - safety is genuinely valued and the members of the organization are motivated to put effort on achieving high levels of safety

Evaluating safety-critical organizations - emphasis on the nuclear industry

International Nuclear Information System (INIS)

Reiman, Teemu; Oedewald, Pia

2009-04-01

An organizational evaluation plays a key role in the monitoring, as well as controlling and steering, of the organizational safety culture. If left unattended, organizations have a tendency to gradually drift into a condition where they have trouble identifying their vulnerabilities and mechanisms or practices that create or maintain these vulnerabilities. The aim of an organizational evaluation should be to promote increased understanding of the sociotechnical system and its changing vulnerabilities. Evaluation contributes to organizational development and management. Evaluations are used in various situations, but when the aim is to learn about possible new vulnerabilities, identify organizational reasons for problems, or prepare for future challenges, the organization is most open to genuine surprises and new findings. It is recommended that organizational evaluations should be conducted when - there are changes in the organizational structures - new tools are implemented - when the people report increased workplace stress or a decreased working climate - when incidents and near-misses increase - when work starts to become routine - when weak signals (such as employees voicing safety concerns or other worries, the organization 'feels' different, organizational climate has changed) are perceived. In organizations that already have a high safety level, safety managers work for their successors. This means that they seldom see the results of their successful efforts to improve safety. This is due to the fact that it takes time for the improvement to become noticeable in terms of increased measurable safety levels. The most challenging issue in an organizational evaluation is the definition of criteria for safety. We have adopted a system safety perspective and we state that an organization has a high potential for safety when - safety is genuinely valued and the members of the organization are motivated to put effort on achieving high levels of safety - it is

The industry commitment to global transport safety standards

International Nuclear Information System (INIS)

Green, L.

2004-01-01

Standards and regulations have no intrinsic practical effect without taking into account those who are the object of such standards and regulations. Standards and regulations do not become operationally effective until they are implemented by the entities which are subject to them. Accordingly, there is a necessary synergy between the regulator and the regulated - the regulators whose task it is to make and enforce the rules for safe, efficient and reliable transport, and those whose job it is to transport within the rules. One has no full meaning without the other. Harmonisation issues which can impede efficient and timely implementation of regulations can occur at any stage of the process, starting with the timely publication of the IAEA Regulations, incorporation by the modal organisations, adoption by national competent authorities and finally, rendered operational by industrial transport organisations. Both, the regulator and the transporter, can be more effective in achieving their purposes when they co-operate in the interest of mutual understanding. PATRAM provides one excellent opportunity for such exchange between the regulator and the regulated - there are other important opportunities within the IAEA and international modal organisations. I suggest, however, that more could be done between the regulators and the regulated collectively to share real-life experiences with actually implementing the regulations and operating within them, and to draw appropriate lessons. In the case of the international transport safety regulatory regime, it is the nuclear transport industry, such as represented by the World Nuclear Transport Institute (WNTI), which is, of course, the object of transport safety standards and regulations. And as such, the nuclear transport industry is a principal stakeholder in the regime. Regulatory compliance is a cornerstone of the nuclear transport industry. The international nature of the fuel cycle mandates transnational movement of

The industry commitment to global transport safety standards

International Nuclear Information System (INIS)

Green, L.

2004-01-01

Standards and regulations have no intrinsic practical effect without taking into account those who are the object of such standards and regulations. Standards and regulations do not become operationally effective until they are implemented by the entities which are subject to them. Accordingly, there is a necessary synergy between the regulator and the regulated-the regulators whose task it is to make and enforce the rules for safe, efficient and reliable transport, and those whose job it is to transport within the rules. One has no full meaning without the other. Harmonisation issues which can impede efficient and timely implementation of regulations can occur at any stage of the process, starting with the timely publication of the IAEA regulations, incorporation by the modal organisations, adoption by national competent authorities and finally, rendered operational by industrial transport organisations. Both the regulator and the transporter can be more effective in achieving their purposes when they cooperate in the interest of mutual understanding. PATRAM provides one excellent opportunity for such exchange between the regulator and the regulated-there are other important opportunities within the IAEA and international modal organisations. It is suggested, however, that more could be done between the regulators and the regulated collectively to share real-life experiences with actually implementing the regulations and operating within them, and to draw appropriate lessons. In the case of the international transport safety regulatory regime, it is the nuclear transport industry, such as represented by the World Nuclear Transport Institute (WNTI), which is, of course, the object of transport safety standards and regulations. And as such, the nuclear transport industry is a principal stakeholder in the regime. Regulatory compliance is a cornerstone of the nuclear transport industry. The international nature of the fuel cycle mandates transnational movement of

The industry commitment to global transport safety standards

Energy Technology Data Exchange (ETDEWEB)

Green, L. [World Nuclear Transport Inst., London (United Kingdom)

2004-07-01

Standards and regulations have no intrinsic practical effect without taking into account those who are the object of such standards and regulations. Standards and regulations do not become operationally effective until they are implemented by the entities which are subject to them. Accordingly, there is a necessary synergy between the regulator and the regulated - the regulators whose task it is to make and enforce the rules for safe, efficient and reliable transport, and those whose job it is to transport within the rules. One has no full meaning without the other. Harmonisation issues which can impede efficient and timely implementation of regulations can occur at any stage of the process, starting with the timely publication of the IAEA Regulations, incorporation by the modal organisations, adoption by national competent authorities and finally, rendered operational by industrial transport organisations. Both, the regulator and the transporter, can be more effective in achieving their purposes when they co-operate in the interest of mutual understanding. PATRAM provides one excellent opportunity for such exchange between the regulator and the regulated - there are other important opportunities within the IAEA and international modal organisations. I suggest, however, that more could be done between the regulators and the regulated collectively to share real-life experiences with actually implementing the regulations and operating within them, and to draw appropriate lessons. In the case of the international transport safety regulatory regime, it is the nuclear transport industry, such as represented by the World Nuclear Transport Institute (WNTI), which is, of course, the object of transport safety standards and regulations. And as such, the nuclear transport industry is a principal stakeholder in the regime. Regulatory compliance is a cornerstone of the nuclear transport industry. The international nature of the fuel cycle mandates transnational movement of

e-Cluster Building and Using for Nuclear Industry Human Resources

International Nuclear Information System (INIS)

Hur, Jung Hoon; Suh, Jang Soo

2009-01-01

In line with its industry support policy, KHNP provides training courses for small and medium sized companies within the nuclear sector. The courses cover three main areas; technical development, market expansion and human resource and finance. They are provided in traditional classroom settings and on-line. Employees from small and medium sized companies can take any of the available courses according to company and individual training and development requirements. While the training and development opportunities serve a role in the growth and development of skills and capabilities industry-wide, KHNP also sees the involvement of a wide range of nuclear industry participants in the program as a means of developing a safety consensus that addresses both operational and social safety concerns. The purpose of this paper is to outline the successes of the KHNP industry training support program to date and to propose the development of an e-Cluster model. This model envisages the development of a nuclear industry. It will provide a means for sharing information and developing and maintaining industry-wide technical, management and safety standards

Safety culture: a comparative study of space, nuclear and oil-gas sectors

International Nuclear Information System (INIS)

Morais, David; Assis, Altair Souza de

2008-01-01

Full text:We access in this paper the safety culture methodology adopted by three different industrial sectors: Nuclear, space/aeronautics and oil-gas, in Brazil. In this work, It is evaluated the planning, training, personal monitoring and the interaction between the technical personal, such as engineers and physicists, with human ones, such social workers and physiologists, key factor to understand the efficacy of the local safety culture pattern. The research is made through the analysis of the relevant manuals and interviewing the safety, human areas personal, and regulatory managers, concerned with/related to safety/working with safety culture at the specific industrial sector. It is compared the efficacies and the official regulatory vision on the issue, for the different sectors, in order to detect confluences and divergences and, so, to propose a model that better treat the safety culture as a global industrial value. (author)

40 CFR Table 5 to Subpart Jj of... - List of VHAP of Potential Concern Identified by Industry

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 10 2010-07-01 2010-07-01 false List of VHAP of Potential Concern Identified by Industry 5 Table 5 to Subpart JJ of Part 63 Protection of Environment ENVIRONMENTAL PROTECTION.... 63, Subpt. JJ, Table 5 Table 5 to Subpart JJ of Part 63—List of VHAP of Potential Concern Identified...

Revolutionizing safety and security in the chemical and process industry: applying the CHESS concept

NARCIS (Netherlands)

Reniers, G.L.L.M.E.; Khakzad Rostami, N.

2017-01-01

This paper argues that a new concept, summarized as ‘CHESS’, should be used in the chemical industry to further substantially advance safety (where we use the term in a broad sense, that is, safety and physical security, amongst others). The different domains that need to be focused upon, and where

Evolution of Food Quality Demand in the Food Service Industry in China: The Case of Duck

OpenAIRE

Carnegie, Rachel Alison

2014-01-01

Booming economic growth and rising consumer incomes have impacted food preferences and purchasing behavior in China. At the same time, several internationally publicized food safety incidents, particularly in the animal husbandry sector, have heightened awareness of and concern for food safety and quality in meat and dairy. Rising quality demand and safety concerns have been studied at length in the food retail sector, but also appear to be important in the food service industry. This researc...

Ethical concerns and career satisfaction in obstetrics and gynecology: a review of recent findings from the Collaborative Ambulatory Research Network.

Science.gov (United States)

Farrow, Victoria A; Leddy, Meaghan A; Lawrence, Hal; Schulkin, Jay

2011-09-01

Obstetricians-gynecologists (ob-gyns) are frequently confronted with situations that have ethical implications (e.g., whether to accept gifts or samples from drug companies or disclosing medical errors to patients). Additionally, various factors, including specific job-related tasks, costs, and benefits, may impact ob-gyns' career satisfaction. Ethical concerns and career satisfaction can play a role in the quality of women's health care. This article summarizes the studies published between 2005 and 2009 by the Research Department of the American College of Obstetricians and Gynecologists, which encompass ethical concerns regarding interactions with pharmaceutical representatives and patient safety/medical error reporting, as well as ob-gyn career satisfaction. Additionally, a brief discussion regarding ethical concerns in the ob-gyn field, in general, highlights key topics for the last 30 years. Ethical dilemmas continue to be of concern for ob-gyns. Familiarity with guidelines on appropriate interactions with industry is associated with lower percentages of potentially problematic relationships with pharmaceutical industries. Physicians report that the expense of patient safety initiatives is one of the top barriers for improving patient safety, followed by fear of liability. Overall, respondents reported being satisfied with their careers. However, half of the respondents reported that they were extremely concerned about the impact of professional liability costs on the duration of their careers. Increased familiarity with guidelines may lead to a decreased ob-gyn reliance on pharmaceutical representatives and free samples, whereas specific and practical tools may help them implement patient safety techniques. The easing of malpractice insurance and threat of litigation may enhance career satisfaction among ob-gyns. This article will discuss related findings in recent years. Obstetricians & Gynecologists and Family Physicians. After the completing the CME

Managing change in the nuclear industry: The effects on safety. INSAG-18. A report by the International Nuclear Safety Advisory Group (Russian Edition)

International Nuclear Information System (INIS)

2015-01-01

The nuclear industry is going through a period of unprecedented change. The changes arise from the political and business environment in which the industry must operate, and from within the industry itself as it strives to become more competitive. These pressures have already led to significant changes in how nuclear enterprises are organized. The changes can be expected to continue. It is absolutely essential that throughout the period of time that organizational changes are taking place, and after the changes have occurred, very high standards of safety are maintained by all the elements that make up the industry. Changes can be made effectively and safely, and gains in efficiency and competitiveness, as well as safety, can be realized if changes are introduced carefully and managed well. Experience has shown that this is not a simple matter to achieve. Nuclear installations are complex, and it is inherently demanding to foresee all the implications that a change may have on safety. However, experience has shown very clearly that many changes have a strong potential to affect both the safety that has been built into a design and in the safety culture of an organization. Hence failure to manage change well can significantly affect the likelihood of an accident, the degree to which the assets of the company are put at risk and the company's reputation. This INSAG report is directed at members of boards of directors and senior executives who are responsible for the overall safety of an installation, who make decisions for change and who implement these decisions. It is also written for senior regulators who, on behalf of the public, ensure that boards of directors and executives meet their responsibilities for safety. This report discusses how and why change can challenge the maintenance of a high level of safety, and what can be done to control that challenge and hence reap all the benefits of change. It draws an analogy between the well established principles

Who was concerned about radiation, food safety, and natural disasters after the great East Japan earthquake and Fukushima catastrophe? A nationwide cross-sectional survey in 2012.

Science.gov (United States)

Sugimoto, Takashi; Shinozaki, Tomohiro; Naruse, Takashi; Miyamoto, Yuki

2014-01-01

Disaster-related concerns by sub-populations have not been clarified after the great East Japan earthquake and the Fukushima nuclear power plant incidents. This paper assesses who was concerned about radiation, food safety, and natural disasters among the general population in order to buffer such concerns effectively. The hypothesis that women, parents, and family caregivers were most concerned about radiation, food safety, and natural disaster was tested using a varying-intercept multivariable logistic regression with 5809 responses from a nationwide cross-sectional survey random-sampled in March 2012. Many people were at least occasionally concerned about radiation (53.5%), food safety (47.3%), and about natural disaster (69.5%). Women were more concerned than men about radiation (OR = 1.67; 95% CI = 1.35-2.06), food safety (1.70; 1.38-2.10), and natural disasters (1.74; 1.39-2.19). Parents and family care needs were not significant. Married couples were more concerned about radiation (1.53; 1.33-1.77), food safety (1.38; 1.20-1.59), and natural disasters (1.30; 1.12-1.52). Age, child-cohabitation, college-completion, retirement status, homemaker status, and the house-damage certificate of the last disaster were also associated with at least one concern. Participants from the Kanto region were more concerned about radiation (2.08; 1.58-2.74) and food safety (1.30; 1.07-1.59), which demonstrate similar positive associations to participants from Tohoku where a disaster relief act was invoked (3.36; 2.25-5.01 about radiation, 1.49; 1.08-2.06 about food safety). Sectioning the populations by gender and other demographics will clarify prospective targets for interventions, allow for a better understanding of post-disaster concerns, and help communicate relevant information effectively.

Who was concerned about radiation, food safety, and natural disasters after the great East Japan earthquake and Fukushima catastrophe? A nationwide cross-sectional survey in 2012.

Directory of Open Access Journals (Sweden)

Takashi Sugimoto

Full Text Available BACKGROUND: Disaster-related concerns by sub-populations have not been clarified after the great East Japan earthquake and the Fukushima nuclear power plant incidents. This paper assesses who was concerned about radiation, food safety, and natural disasters among the general population in order to buffer such concerns effectively. METHODS: The hypothesis that women, parents, and family caregivers were most concerned about radiation, food safety, and natural disaster was tested using a varying-intercept multivariable logistic regression with 5809 responses from a nationwide cross-sectional survey random-sampled in March 2012. RESULTS: Many people were at least occasionally concerned about radiation (53.5%, food safety (47.3%, and about natural disaster (69.5%. Women were more concerned than men about radiation (OR = 1.67; 95% CI = 1.35-2.06, food safety (1.70; 1.38-2.10, and natural disasters (1.74; 1.39-2.19. Parents and family care needs were not significant. Married couples were more concerned about radiation (1.53; 1.33-1.77, food safety (1.38; 1.20-1.59, and natural disasters (1.30; 1.12-1.52. Age, child-cohabitation, college-completion, retirement status, homemaker status, and the house-damage certificate of the last disaster were also associated with at least one concern. Participants from the Kanto region were more concerned about radiation (2.08; 1.58-2.74 and food safety (1.30; 1.07-1.59, which demonstrate similar positive associations to participants from Tohoku where a disaster relief act was invoked (3.36; 2.25-5.01 about radiation, 1.49; 1.08-2.06 about food safety. CONCLUSIONS: Sectioning the populations by gender and other demographics will clarify prospective targets for interventions, allow for a better understanding of post-disaster concerns, and help communicate relevant information effectively.

Radiological protection, safety and security issues in the industrial and medical applications of radiation sources

International Nuclear Information System (INIS)

Vaz, Pedro

2015-01-01

The use of radiation sources, namely radioactive sealed or unsealed sources and particle accelerators and beams is ubiquitous in the industrial and medical applications of ionizing radiation. Besides radiological protection of the workers, members of the public and patients in routine situations, the use of radiation sources involves several aspects associated to the mitigation of radiological or nuclear accidents and associated emergency situations. On the other hand, during the last decade security issues became burning issues due to the potential malevolent uses of radioactive sources for the perpetration of terrorist acts using RDD (Radiological Dispersal Devices), RED (Radiation Exposure Devices) or IND (Improvised Nuclear Devices). A stringent set of international legally and non-legally binding instruments, regulations, conventions and treaties regulate nowadays the use of radioactive sources. In this paper, a review of the radiological protection issues associated to the use of radiation sources in the industrial and medical applications of ionizing radiation is performed. The associated radiation safety issues and the prevention and mitigation of incidents and accidents are discussed. A comprehensive discussion of the security issues associated to the global use of radiation sources for the aforementioned applications and the inherent radiation detection requirements will be presented. Scientific, technical, legal, ethical, socio-economic issues are put forward and discussed. - Highlights: • The hazards associated to the use of radioactive sources must be taken into account. • Security issues are of paramount importance in the use of radioactive sources. • Radiation sources can be used to perpetrate terrorist acts (RDDs, INDs, REDs). • DSRS and orphan sources trigger radiological protection, safety and security concerns. • Regulatory control, from cradle to grave, of radioactive sources is mandatory.

New radiation protection concept as important safety factor of industrial radiography

International Nuclear Information System (INIS)

Pavlovic, R.; Pavlovic, S.

1998-01-01

Industrial radiography is a method for non destructive testing of homogeneity of various materials based on different absorption of radiation in different material. X and γ radiation are the most often used. Detrimental effects of radiation are observed since its discovery. In order to prevent harmful effects of radiation without unduly limitations of its use, International Commission on Radiological Protection in collaboration with International Atomic Energy Agency have developed International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources, Safety Series No 115, adopted in 1996. based on ICRP recommendations from 1991. Besides a lot of changes in radiation protection concept and philosophy, decrement of annual dose limits for occupational exposure from 50 to 20 mSv. (author)

Nuclear safety. Summary of the intermediate report of the special joint parliamentary committee on nuclear safety, present and future outlook of the nuclear industry

International Nuclear Information System (INIS)

Birraux, Claude; Bataille, Christian; Sido, Bruno

2011-09-01

Following the Fukushima events, the Parliamentary Office for Scientific and Technological Assessment (OPECST) was officially asked at the end of March 2011 - jointly by the National Assembly Bureau and by the Senate Committee on the economy, sustainable development, territorial and regional planning - to carry out a study on nuclear safety, and the present and future outlook of the nuclear industry. To carry out this study, seven members of the National Assembly economic affairs and sustainable development committees were also involved, as well as eight members of the Senate Committee on the economy, sustainable development, territorial and regional planning. The first part of this study, devoted to nuclear safety, was completed on 30 June 2011 by the publication of an intermediate report. This report assembles and summarises the information collected during six public hearings and seven trips to nuclear sites. France is one of the nuclear countries where the management of safety is both the most demanding and the most transparent. In this respect, the independence of the Safety Authority is the best guarantee of strictness in the safety field and the existence of pluralistic bodies, such as the Local Information Committees, is the best guarantee of the transparency of safety. But no country can pride itself on being totally safe from a natural disaster of an unexpected scale. The French nuclear industry must therefore ratchet up one more notch its investment in safety and strengthen the means of university research. It must imagine events of even greater intensity, cascading accidents, with interactions between neighbouring industrial sites. Investment must be made by placing safety requirements above any economic consideration and in strict compliance with the specifications of public authorities supervising safety. (authors)

77 FR 75439 - Guidances for Industry and Investigators on Safety Reporting Requirements for Investigational New...

Science.gov (United States)

2012-12-20

...] Guidances for Industry and Investigators on Safety Reporting Requirements for Investigational New Drug Applications and Bioavailability/Bioequivalence Studies, and a Small Entity Compliance Guide; Availability... Reporting Requirements for INDs and BA/BE Studies'' and ``Safety Reporting Requirements for INDs and BA/BE...

Application of elements of microbiological risk assessment in the food industry via a tiered approach

NARCIS (Netherlands)

Gerwen, van S.J.C.; Gorris, L.G.M.

2004-01-01

Food safety control is a matter for concern for all parts of the food supply chain, including governments that develop food safety policy, food industries that must control potential hazards, and consumers who need to keep to the intended use of the food. In the future, food safety policy may be set

Sustainable Development as Concern for Industrial Companies

DEFF Research Database (Denmark)

Bundgaard, Hans

Today, the industrial company has responsibilities towards the environment, the society, and the owners. From a theoretical base of social theory and social science, this industry research has considered the preconditions for a more proactive industrial response towards sustainability. A new conc...

NMC and A and nuclear criticality safety systems integration: A prospective way for enhancement of the nuclear industry facilities safety

International Nuclear Information System (INIS)

Ryazanov, Boris G.; Sviridov, Victor I.; Frolov, Vladimir V.; Shvedov, Maxim O.; Mclaughlin, Thomas P.; Pruvost, Norman L.

2003-01-01

A considerable body of data has now been acquired about the principles, parameters and consequences of nuclear (criticality) accidents at facilities of the atomic industry in Russia, the United States, Great Britain and Japan. The total number of such accidents stands at 22. Russian and US specialists have prepared a rather extensive survey and analysis of these accidents. The final and important section of this survey is the lessons implied by the results of analysis of these 22 accidents. Among these lessons is the necessity of unconditional enforcement of control over the movement and transformations of special nuclear materials (SNM), and in particular fissile materials, (those SNMs with criticality accident concerns) during production and processing. Inadequacies in such control have been among the causes of most of the accidents that have occurred. Nuclear materials control and accounting (MC and A) for the purpose of ensuring storage reliability and nonproliferation safeguards is a major task of nuclear facilities in any nation. MC and A systems use the latest techniques and hardware for periodic control of SNM in specifically organized material balance areas. Immediate checking, periodic inventory of SNM, and measurements of the parameters of SNM at key points are the main sources of data for these systems. Data about the presence and sites of location of SNM in material balance areas that are acquired in inventories can be used for objective assessment of the status of nuclear safety. On the other hand, the inventory itself involves performance of operations that are unlike routine process engineering, and require special consideration of nuclear safety. Use of the techniques and hardware of MC and A systems not only for purposes of storage reliability, but also to ensure nuclear safety, will reduce the risk of nuclear accidents. This paper gives a concise overview of nuclear accidents that have occurred due to inadequacies in MC and A, and demonstrates

The contribution of the industry sector to the construction of a European area of safety and radiation protection

International Nuclear Information System (INIS)

Zaiss, W.; Parker, G.; Glibert, M.

2010-01-01

The European Atomic Forum (FORATOM) is a trade association representing the European nuclear industry. Its main purpose is to promote the use of nuclear energy in Europe by representing the interests of this important and multi-faceted industrial sector. The European nuclear industry recognized that with the deregulation of the electricity market, diversity of national regulations could seriously distort competition. Therefore harmonizing regulatory practices is the best way of ensuring that the industry can evolve within a stable legal framework. In order to pool resources, the licensees launched mid 2005 ENISS (European Nuclear Installation Safety Standard Initiative) under the umbrella of FORATOM. The EU institutions have in recent years acknowledged nuclear energy as a key component of Europe's energy mix. Major European survey shows public acceptance of nuclear energy is on the increase. Support for discussion and debate on nuclear energy has been supported over the past few years by the European Union through the establishment of the European Nuclear Safety Regulators Group (ENSREG) and the European Nuclear Energy Forum (ENEF). FORATOM and ENISS have been a keen supporter and participant of the ENEF process. The European Nuclear Industry considers that the existing arrangements for ensuring nuclear safety in the EU under the guidance of international nuclear organisations, conventions and under the control of the national safety authorities have delivered excellent safety records. However, the industry has a role to play in the further harmonization processes and is therefore willing to contribute to the dialogue with all possible stakeholders. (author)

Misapplication of the IAEA 1996 basic safety standards to the minerals industry. Impact on the NORM and TENORM issues

Energy Technology Data Exchange (ETDEWEB)

Koperski, J. [Iluka Resources Limited, Capel (Australia)

2000-05-01

Mining and processing of minerals results in increased concentrations of the naturally occurring radioactive materials (NORM) in products and/or process wastes, relative to the source materials. The technologically enhanced naturally occurring radioactive material (TENORM) phenomenon may bring minerals industry operations into the ream of regulatory concern worldwide. The IAEA 1996 International Basic Safety Standards (BSS) have become the de facto blueprint for a number of national radiation safety regulations. But verbatim adoption of the BSS would clearly result in the great majority of minerals industry operations becoming, for the first time ever, subject to the provisions of radiation protection legislation. Consequently, notification, registration, licensing, occupational and environmental monitoring, statutory reporting, appointment of radiation safety staff etc. would be required. This would not only constitute a major culture shock' but would result in ongoing logistics and economic burden to the affected operations. In some cases it could spell their end. The commensurate demand on regulatory authorities would also emerge. The exemption criteria from the requirements of the BSS are very restrictive. They are not suitable for mining and processing of NORM/TENORM bearing minerals. The criteria have been expressed in terms of numerical exemption levels for hundreds of radionuclides, including all those that occur naturally. The levels specify both, the maximum exempted Activity Concentration and the maximum exempted total Activity of each radionuclide in the host material. Even if an operation could comply with the Activity Concentration criterion, due to the sheer mass of the minerals a non-compliance with the total Activity would always occur. The maximum exempted mass is of the order of single kilograms for wastes from petroleum and gas production, tin smelting and bauxite ore processing; for phosphate rock, fertilisers and most mineral sands

Misapplication of the IAEA 1996 basic safety standards to the minerals industry. Impact on the NORM and TENORM issues

International Nuclear Information System (INIS)

Koperski, J.

2000-01-01

Mining and processing of minerals results in increased concentrations of the naturally occurring radioactive materials (NORM) in products and/or process wastes, relative to the source materials. The technologically enhanced naturally occurring radioactive material (TENORM) phenomenon may bring minerals industry operations into the ream of regulatory concern worldwide. The IAEA 1996 International Basic Safety Standards (BSS) have become the de facto blueprint for a number of national radiation safety regulations. But verbatim adoption of the BSS would clearly result in the great majority of minerals industry operations becoming, for the first time ever, subject to the provisions of radiation protection legislation. Consequently, notification, registration, licensing, occupational and environmental monitoring, statutory reporting, appointment of radiation safety staff etc. would be required. This would not only constitute a major culture shock' but would result in ongoing logistics and economic burden to the affected operations. In some cases it could spell their end. The commensurate demand on regulatory authorities would also emerge. The exemption criteria from the requirements of the BSS are very restrictive. They are not suitable for mining and processing of NORM/TENORM bearing minerals. The criteria have been expressed in terms of numerical exemption levels for hundreds of radionuclides, including all those that occur naturally. The levels specify both, the maximum exempted Activity Concentration and the maximum exempted total Activity of each radionuclide in the host material. Even if an operation could comply with the Activity Concentration criterion, due to the sheer mass of the minerals a non-compliance with the total Activity would always occur. The maximum exempted mass is of the order of single kilograms for wastes from petroleum and gas production, tin smelting and bauxite ore processing; for phosphate rock, fertilisers and most mineral sands products

Preliminary results from the application of risk matrix method for safety assessment in industrial radiography

International Nuclear Information System (INIS)

Lopez G, A.; Cruz, D.; Truppa, W.; Aravena, M.; Tamayo, B.

2015-09-01

Although the uses of ionizing radiation in industry are subject to procedures that provide a high level of safety, experience has shown that equipment failure, human errors, or the combination of both that can trigger accidental exposures may occur. Traditionally, the radiation safety checks whether these industrial practices (industrial radiography, industrial irradiators, among others) are sufficiently safe to prevent similar accidental exposures already occurred, so that becomes dependent on the published information and not always answers questions like: What other events can occur, or what other risks are present? Taking into account the results achieved by the Foro Iberoamericano de Organismos Reguladores Radiologicos y Nucleares, its leading position in the use of techniques of risk analysis in radioactive facilities and the need to develop a proactive approach to the prevention of accidents arising from the use of ionizing radiations in the industry, it intends to apply the risk analysis technique known as Risk Matrix to a hypothetical reference entity for the region in which industrial radiography is performed. In this paper the results of the first stage of this study are shown, that is the identification of initiating events (IE) and barriers that help mitigate the consequences of such IE, so that can appreciate the applicability of this method to industrial radiography services, to reduce the risk to acceptable levels. The fundamental advantage associated with the application of this methodology is that can be applied by the professionals working in the service and identifies specific weaknesses that from the point of view of safety there, so they can be prioritized resources depending on risk reduction. (Author)

Transactions of the Twenty-First Water Reactor Safety Information Meeting

International Nuclear Information System (INIS)

Monteleone, S.

1993-10-01

This report contains summaries of papers on reactor safety research to be presented at the 21st Water Reactor Safety Information Meeting at the Bethesda Marriott Hotel, Bethesda, Maryland, October 25--27, 1993. The summaries briefly describe the programs and results of nuclear safety research sponsored by the Office of Nuclear Regulatory Research, US NRC. Summaries of invited papers concerning nuclear safety issues from US government laboratories, the electric utilities, the Electric Power Research Institute (EPRI), the nuclear industry, and from foreign governments and industry are also included. The summaries have been compiled in one report to provide a basis for meaningful discussion and information exchange during the course of the meeting and are given in the order of their presentation in each session

Transactions of the Twenty-First Water Reactor Safety Information Meeting

Energy Technology Data Exchange (ETDEWEB)

Monteleone, S. [comp.

1993-10-01

This report contains summaries of papers on reactor safety research to be presented at the 21st Water Reactor Safety Information Meeting at the Bethesda Marriott Hotel, Bethesda, Maryland, October 25--27, 1993. The summaries briefly describe the programs and results of nuclear safety research sponsored by the Office of Nuclear Regulatory Research, US NRC. Summaries of invited papers concerning nuclear safety issues from US government laboratories, the electric utilities, the Electric Power Research Institute (EPRI), the nuclear industry, and from foreign governments and industry are also included. The summaries have been compiled in one report to provide a basis for meaningful discussion and information exchange during the course of the meeting and are given in the order of their presentation in each session.

Transactions of the twenty-second water reactor safety information meeting

International Nuclear Information System (INIS)

1994-10-01

This report contains summaries of papers on reactor safety research to be presented at the 22nd Water Reactor Safety Information Meeting at the Bethesda Marriott Hotel, Bethesda, Maryland, October 24--26, 1994. The summaries briefly describe the programs and results of nuclear safety research sponsored by the Office of Nuclear Regulatory Research, US NRC. Summaries of invited papers concerning nuclear safety issues from US government laboratories, the electric utilities, the nuclear industry, and from foreign governments and industry are also included. The summaries have been compiled in one report to provide a basis for meaningful discussion and information exchange during the course of the meeting and are given in the order of their presentation in each session. Individual papers have been cataloged separately

Transactions of the nineteenth water reactor safety information meeting

International Nuclear Information System (INIS)

Weiss, A.J.

1991-10-01

This report contains summaries of papers on reactor safety research to be presented at the 19th Water Reactor Safety Information Meeting at the Bethesda Marriott Hotel in Bethesda, Maryland, October 28--30, 1991. The summaries briefly describe the programs and results of nuclear safety research sponsored by the Office of Nuclear Regulatory Research, USNRC. Summaries of invited papers concerning nuclear safety issues from US government laboratories, the electric utilities, the Electric Power Research Institute (EPRI), the nuclear industry, and from the governments and industry in Europe and Japan are also included. The summaries have been compiled in one report to provide a basis for meaningful discussion and information exchange during the course of the meeting, and are given in the order of their presentation in each session. The individual summaries have been cataloged separately

How to interpret safety critical failures in risk and reliability assessments

International Nuclear Information System (INIS)

Selvik, Jon Tømmerås; Signoret, Jean-Pierre

2017-01-01

Management of safety systems often receives high attention due to the potential for industrial accidents. In risk and reliability literature concerning such systems, and particularly concerning safety-instrumented systems, one frequently comes across the term ‘safety critical failure’. It is a term associated with the term ‘critical failure’, and it is often deduced that a safety critical failure refers to a failure occurring in a safety critical system. Although this is correct in some situations, it is not matching with for example the mathematical definition given in ISO/TR 12489:2013 on reliability modeling, where a clear distinction is made between ‘safe failures’ and ‘dangerous failures’. In this article, we show that different interpretations of the term ‘safety critical failure’ exist, and there is room for misinterpretations and misunderstandings regarding risk and reliability assessments where failure information linked to safety systems are used, and which could influence decision-making. The article gives some examples from the oil and gas industry, showing different possible interpretations of the term. In particular we discuss the link between criticality and failure. The article points in general to the importance of adequate risk communication when using the term, and gives some clarification on interpretation in risk and reliability assessments.

Health and safety aspects of textile workers from Solapur (India textile industries

Directory of Open Access Journals (Sweden)

Rahul B Hiremath

2014-12-01

Full Text Available Introduction: Textile sector in India plays an important role in the country's economy, providing employment to a significant population in rural and urban areas. Objectives: This paper focuses on health and safety aspects of textile workers in Solapur City (one of the key textile cluster in the state of Maharashtra, India. Methodology: A sample of 180 workers from the identified textile industries of Solapur city were assessed for their general physique, muscle tone, lung condition, and eyesight using different techniques. The study aimed at developing a framework for understanding risks to textile workers resulting from lack of health and safety standards in companies. Results: Findings showed that most of the workers have been affected by respiratory problems, increase in muscle tone, eye problems and musculoskeletal problem. It has been also observed that job security or regular work impacts positively to the worker’s long term body health. However, there is an immediate need to adopt and implement measures in accordance with Indian Factories Act (OHSAS 18001/ILO-OSH 2001 which includes directions and procedures in respect of industrial installations, work environment and occupational health and safety guidelines.

A study of ECPs (Employee Concerns Programs), a corporate allegation program at U.S. nuclear industries

International Nuclear Information System (INIS)

Tanabe, Tomoyuki; Suzuki, Tatsujiro

2004-01-01

Introduction of whistleblower protection system in the U.S. federal nuclear safety regulations has encouraged developments of ECPs (Employee Concerns Programs) as corporate allegation programs at utility companies in the U.S. It is found that as ECPs improve, fewer complainants are reported to the NRC each year. It seems that the introduction of whistleblower protection has had positive impacts on corporate compliance activities. In short, improved corporate compliance programs will be likely to contribute to more effective nuclear whistleblower protection system, as well as to enhance safety of nuclear power plants. (author)

Proceedings of the Seminar on Environmental and Radiation Safety Aspect at Non-nuclear Industry

International Nuclear Information System (INIS)

Mulyadi Rachmad; Muhammad Fathoni; Topo Suprihadi, PY.; Dumais, Johannes Robert; Eri Hiswara; Alatas, Zubaidah; Dahlan, Kgs.; Muhammad Isnaini

2003-03-01

The Seminar on Environmental and Radiation Safety Aspect at Non-nuclear Industry held on March 2003 in Jakarta. The purpose of this Seminar be able to information exchange among research workers in National Nuclear Energy Agency. The Seminar discussed about Science and Technology of Radiation Safety and Environment. There are 17 papers which have separated index. (PPIN)

Wireless Sensing Based on RFID and Capacitive Technologies for Safety in Marble Industry Process Control