A study on the establishment of safety assessment guidelines of commercial grade item dedication in digitalized safety systems

International Nuclear Information System (INIS)

Hwang, H. S.; Kim, B. R.; Oh, S. H.

1999-01-01

Because of obsolescing the components used in safety related systems of nuclear power plants, decreasing the number of suppliers qualified for the nuclear QA program and increasing maintenance costs of them, utilities have been considering to use commercial grade digital computers as an alternative for resolving such issues. However, commercial digital computers use the embedded pre-existing software, including operating system software, which are not developed by using nuclear grade QA program. Thus, it is necessary for utilities to establish processes for dedicating digital commercial grade items. A regulatory body also needs guidance to evaluate the digital commercial products properly. This paper surveyed the regulations and their regulatory guides, which establish the requirements for commercial grade items dedication, industry standards and guidances applicable to safety related systems. This paper provides some guidelines to be applied in evaluating the safety of digital upgrades and new digital plant protection systems in Korea

78 FR 46560 - Pipeline Safety: Class Location Requirements

Science.gov (United States)

2013-08-01

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... class location requirements for gas transmission pipelines. Section 5 of the Pipeline Safety, Regulatory... and, with respect to gas transmission pipeline facilities, whether applying IMP requirements to...

Initial Q-list for the prospective Yucca Mountain repository based on items important to safety and waste isolation

International Nuclear Information System (INIS)

Laub, T.W.; Jardine, L.J.

1987-01-01

A method for identifying items important to safety based on a probabilistic risk assessment approach was developed and implemented for the conceptual design of the Yucca Mountain repository. No items were classified as important to safety; however, six items were classified as potentially important to safety. These were the shipping cask, the cranes and the truck or rail-care vehicle stops in the cask receiving and preparation area, the hot cell structure of the waste packaging hot cells, the cranes in the waste packaging hot cells, and the waste-handling building fire protection system. In addition, a method for identifying items important to waste isolation was developed and implemented. Two hydrogeologic units of the Yucca Mountain site were classified as important to waste isolation: the Calico Hills nonwelded zeolitic unit and the Calico Hills nonwelded vitric unit. The preliminary Q-list for the Yucca Mountain repository is comprised of the two units of the site classified as important to waste isolation and contains no items important to safety

Initial Q-list for the prospective Yucca Mountain repository based on items important to safety and waste isolation

International Nuclear Information System (INIS)

Laub, T.W.; Jardine, L.J.

1987-01-01

A method for identifying items important to safety based on a probabilistic risk assessment approach was developed and implemented for the conceptual design of the Yucca Mountain repository. No items were classified as important to safety; however, six items were classified as potentially important to safety. These were the shipping cask, the cranes and the truck or rail-car vehicle stops in the cask receiving and preparation area, the hot cell structure of the waste packaging hot cells, the cranes in the waste packaging hot cells, and the waste-handling building fire protection system. In addition, a method for identifying items important to waste isolation was developed and implemented. Two hydrogeologic units of the Yucca Mountain site were classified as important to waste isolation: the Calico Hills nonwelded zeolitic unit and the Calico Hills nonwelded vitric unit. The preliminary Q-list for the Yucca Mountain repository is comprised of the two units of the site classified as important to waste isolation and contains no items important to safety

Laser Safety Inspection Criteria

International Nuclear Information System (INIS)

Barat, K

2005-01-01

A responsibility of the Laser Safety Officer (LSO) is to perform laser safety audits. The American National Standard Z136.1 Safe use of Lasers references this requirement in several sections: (1) Section 1.3.2 LSO Specific Responsibilities states under Hazard Evaluation, ''The LSO shall be responsible for hazards evaluation of laser work areas''; (2) Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''; and (3) Appendix D, under Survey and Inspections, it states, ''the LSO will survey by inspection, as considered necessary, all areas where laser equipment is used''. Therefore, for facilities using Class 3B and or Class 4 lasers, audits for laser safety compliance are expected to be conducted. The composition, frequency and rigueur of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms. In many institutions, a sole Laser Safety Officer (LSO) or a number of Deputy LSO's perform these audits. For that matter, there are institutions that request users to perform a self-assessment audit. Many items on the common audit list and the associated findings are subjective because they are based on the experience and interest of the LSO or auditor in particular items on the checklist. Beam block usage is an example; to one set of eyes a particular arrangement might be completely adequate, while to another the installation may be inadequate. In order to provide more consistency, the National Ignition Facility Directorate at Lawrence Livermore National Laboratory (NIF-LLNL) has established criteria for a number of items found on the typical laser safety audit form. These criteria are distributed to laser users, and they serve two broad purposes: first, it gives the user an expectation of what will be reviewed by an auditor, and second, it is an

Benchmarking road safety performance: Identifying a meaningful reference (best-in-class).

Science.gov (United States)

Chen, Faan; Wu, Jiaorong; Chen, Xiaohong; Wang, Jianjun; Wang, Di

2016-01-01

For road safety improvement, comparing and benchmarking performance are widely advocated as the emerging and preferred approaches. However, there is currently no universally agreed upon approach for the process of road safety benchmarking, and performing the practice successfully is by no means easy. This is especially true for the two core activities of which: (1) developing a set of road safety performance indicators (SPIs) and combining them into a composite index; and (2) identifying a meaningful reference (best-in-class), one which has already obtained outstanding road safety practices. To this end, a scientific technique that can combine the multi-dimensional safety performance indicators (SPIs) into an overall index, and subsequently can identify the 'best-in-class' is urgently required. In this paper, the Entropy-embedded RSR (Rank-sum ratio), an innovative, scientific and systematic methodology is investigated with the aim of conducting the above two core tasks in an integrative and concise procedure, more specifically in a 'one-stop' way. Using a combination of results from other methods (e.g. the SUNflower approach) and other measures (e.g. Human Development Index) as a relevant reference, a given set of European countries are robustly ranked and grouped into several classes based on the composite Road Safety Index. Within each class the 'best-in-class' is then identified. By benchmarking road safety performance, the results serve to promote best practice, encourage the adoption of successful road safety strategies and measures and, more importantly, inspire the kind of political leadership needed to create a road transport system that maximizes safety. Copyright © 2015 Elsevier Ltd. All rights reserved.

Application of the Commercial Grade Item (CGI) Dedication Process for Procurement of Nuclear Safety Related Items at Nuclear Power Plant Krsko (NEK)

International Nuclear Information System (INIS)

Heruc, Z.; Pozar, J.

1998-01-01

CGI procurement is a process whereby parts are brought without imposing Appendix B Quality Assurance requirements on the supplier, and than dedicated for use in safety-related applications. The dedication process involves 1) based upon required safety function, an engineering evaluation to identify critical characteristic of the item and specification of acceptance criteria; and 2) quality control activities to ensure the item(s) supplied meets the acceptance criteria specified. CGI Dedication supports the supply of certified components/parts for the plant operation in an environment where the number of nuclear qualified suppliers diminishes. It requires a more active role of the plant personnel, therefore presenting an additional burden on human resources, but at the same time increases the technical KNOW-HOW and improves the confidence of test and inspection data presented in the certificates. Very often it is also cost beneficial. This paper is a continuation to last year presentation of the introduction of this method into NEK's procurement process and presents the current approach and some practical examples. (author)

Design review report for modifications to RMCS safety class equipment

International Nuclear Information System (INIS)

Corbett, J.E.

1997-01-01

This report documents the completion of the formal design review for modifications to the Rotary Mode Core Sampling (RMCS) safety class equipment. These modifications are intended to support core sampling operations in waste tanks requiring flammable gas controls. The objective of this review was to approve the Engineering Change Notices affecting safety class equipment used in the RMCS system. The conclusion reached by the review committee was that these changes are acceptable

Design review report for modifications to RMCS safety class equipment

Energy Technology Data Exchange (ETDEWEB)

Corbett, J.E.

1997-05-30

This report documents the completion of the formal design review for modifications to the Rotary Mode Core Sampling (RMCS) safety class equipment. These modifications are intended to support core sampling operations in waste tanks requiring flammable gas controls. The objective of this review was to approve the Engineering Change Notices affecting safety class equipment used in the RMCS system. The conclusion reached by the review committee was that these changes are acceptable.

Value of preapproval safety data in predicting postapproval hepatic safety and assessing the legitimacy of class warning.

Science.gov (United States)

Lin, Yeong-Liang; Wu, Ya-Chi; Gau, Churn-Shiouh; Lin, Min-Shung

2012-02-01

The objective of this study was to systematically evaluate whether preapproval safety data for nonhepatotoxic drugs and hepatotoxic drugs can be compared to improve preapproval prediction of postapproval hepatic safety and to assess the legitimacy of applying class warnings. Drugs within a therapeutic class that included at least one drug that had been withdrawn from the market because of liver toxicity or had a warning of potential liver toxicity issued by major regulatory agencies, and at least one drug free from such regulatory action, were identified and divided into two groups: drugs with and drugs without regulatory action. Preapproval clinical data [including the elevation rates of alanine aminotransferse (ALT) and withdrawal due to liver toxicity, the number of patients with combined elevation of ALT and bilirubin, and liver failure] and nonclinical data (including chemical structures, metabolic pathways, and other significant findings in animal studies) were compared between the two groups. Six drug classes were assessed in this study: thiazolidinediones, cyclooxygenase-2 inhibitors, fluoroquinolones, catechol-O-methyltransferase (COMT) inhibitors, leukotriene receptor inhibitors, and endothelin receptor antagonists. In two classes (COMT inhibitors and endothelin receptor antagonists), drugs with regulatory action had significantly higher rates of ALT elevation of more than threefold and greater numbers of patients with combined elevation of ALT and bilirubin than drugs without regulatory action. Drugs with regulatory action also had chemical structures or metabolic pathways associated with the toxicity. The legitimacy of class warnings was refuted in all six classes of drugs. Preapproval safety data may help predict postapproval hepatic safety and can be used to assess the legitimacy of applying class warnings.

Structural evaluation of safety class components to natural phenomena loadings

International Nuclear Information System (INIS)

Conrads, T.J.

1989-01-01

This paper addresses the efforts completed at the US Department of Energy Hanford Site near Richland, Washington, to qualify structurally a number of existing safety class components in the Plutonium Finishing Plant complex. Design, fabrication, and installation of the facility occurred in the 1950s and 1960s and were based on the Uniform Building Code criteria for wind and earthquake loads. Recently the buildings were qualified to site-specific wind and seismic hazards. The methodology employed to qualify seismically the safety class components is discussed

Review of design criteria and safety analysis of safety class electric building for fuel test loop

Energy Technology Data Exchange (ETDEWEB)

Kim, J. Y.

1998-02-01

Steady state fuel test loop will be equipped in HANARO to obtain the development and betterment of advanced fuel and materials through the irradiation tests. HANARO fuel test loop was designed for CANDU and PWR fuel testing. Safety related system of Fuel Test Loop such as emergency cooling water system, component cooling water system, safety ventilation system, high energy line break mitigation system and remote control room was required 1E class electric supply to meet the safety operation in accordance with related code. Therefore, FTL electric building was designed to construction and install the related equipment based on seismic category I. The objective of this study is to review the design criteria and analysis the safety function of safety class electric building for fuel test loop, and this results will become guidance for the irradiation testing in future. (author). 10 refs., 6 tabs., 30 figs.

[The safety data sheets of the paint and coatings sector: analysis of the items of most interest to health and safety in the workplace].

Science.gov (United States)

Boniardi, Luca; Canti, Zulejka; Cantoni, Susanna; Fustinoni, Silvia

2014-07-15

The interlinked REACH-CLP regulations promote the sharing of knowledge regarding the risks and hazards of chemicals throughout the supply chain. The safety data sheet (SDS) is the main instrument to achieve this goal. to study 100 SDS of paints and coatings sector in order to highlight major criticisms related to health and safety of workers. Using the criteria prescribed by Regulation 453/2010/EC and preparing a suitable check list, some items of the sections 1 "Identification of the substance/mixture and of the company", 2 "Hazards identification", 3 "Composition/information on ingredients", the first part of section 7 "Precautions for safe handling", sections 8 "Exposure controls/personal protection" and 16 "Other information", were therefore evaluated for their appropriateness. Seven SDS were written in a foreign language and were excluded from further analysis. Of the remaining 93 SDS, only 23% had a proportion of adequate items greater than 80%, 49 % had adequate items between 60 and 80%, and 28% had less than 60% adequate items. The most critical sections were those relating to workers' safe handling and exposure controls and protection. In conclusion, from the analysis of SDS we found high percentages of inadequacy, especially in sections 7 and 8, the most relevant for the protection of the health and safety of workers.

Discussion map and cooking classes: testing the effectiveness of teaching food safety to immigrants and refugees.

Science.gov (United States)

Gold, Abby; Yu, Nan; Buro, Brandy; Garden-Robinson, Julie

2014-01-01

To evaluate the effectiveness of a food safety map as an educational method with English language learners. English language learner community members (n = 73) were assigned randomly to participate in 1 of 3 experimental conditions: food safety map, cooking class, and control. Participants in the food safety map and cooking class conditions completed a pre-education demographic and cooking history questionnaire, a post-education knowledge and intention questionnaire, and a 2-week post-cooking and food safety habits assessment. Participants in the control group received no educational training but completed the pre- and 2-week post-education assessments. The cooking class and the map class were both effective in increasing food safety knowledge. Specifically, by comparing with the control group, they significantly increased participants' knowledge of safely cooking large meat (χ² [df = 2, n = 66] = 40.87; P effects on boosting food safety behavioral intention (measured right after the class). The data collected 2 weeks after the classes suggested that individuals who took the classes followed the suggested food behaviors more closely than those in the control group (P < .01). The food safety map is simple to use and prepare, beneficial for oral and visual learners, and inexpensive. Compared with a food safety cooking class, the map produces similar learning and behavioral outcomes. Copyright © 2014 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Research and design of hanger and support series of nuclear safety class process piping

International Nuclear Information System (INIS)

Mao Chengzhang; Shi Jiemin

1995-12-01

Hangers and supports of nuclear safety class piping are an important part of primary system piping in a nuclear power plant. They will directly affect the reliability of operation, the period at construction and the investment for a nuclear power plant. It is an absolutely necessary job for Pakistan Chashma Nuclear Power Plant Project to research and design a series of piping supports in accordance with ASME-III NF. It is also an important designing for developing nuclear power plant later in China. After working over two years, a series of piping supports of nuclear safety class which have 57 types and more than 2460 specifications have been designed. This series is perfect, and can satisfy the requirements of piping final designing for nuclear power plant. This series of hangers and supports is mainly used in the process piping of nuclear safety class 1,2,3. They can also be used in other piping of nuclear safety class and piping with aseismic requirement of non-nuclear safety class

Project W-030 safety class upgrade summary report

International Nuclear Information System (INIS)

Kriskovich, J.R.

1998-01-01

This document presents a summary of safety class criteria for the 241-AY/AZ Tank Farm primary ventilation system upgrade under Project W-030, and recommends acceptance of the system as constructed, based on a review of supporting documentation

Product Engineering Class in the Software Safety Risk Taxonomy for Building Safety-Critical Systems

Science.gov (United States)

Hill, Janice; Victor, Daniel

2008-01-01

When software safety requirements are imposed on legacy safety-critical systems, retrospective safety cases need to be formulated as part of recertifying the systems for further use and risks must be documented and managed to give confidence for reusing the systems. The SEJ Software Development Risk Taxonomy [4] focuses on general software development issues. It does not, however, cover all the safety risks. The Software Safety Risk Taxonomy [8] was developed which provides a construct for eliciting and categorizing software safety risks in a straightforward manner. In this paper, we present extended work on the taxonomy for safety that incorporates the additional issues inherent in the development and maintenance of safety-critical systems with software. An instrument called a Software Safety Risk Taxonomy Based Questionnaire (TBQ) is generated containing questions addressing each safety attribute in the Software Safety Risk Taxonomy. Software safety risks are surfaced using the new TBQ and then analyzed. In this paper we give the definitions for the specialized Product Engineering Class within the Software Safety Risk Taxonomy. At the end of the paper, we present the tool known as the 'Legacy Systems Risk Database Tool' that is used to collect and analyze the data required to show traceability to a particular safety standard

Aging evaluation methodology of periodic safety review in Korea

International Nuclear Information System (INIS)

Park, Heung-Bae; Jung, Sung-Gyu; Jin, Tae-Eun; Jeong, Ill-Seok

2002-01-01

In Korea plant lifetime management (PLIM) study for Kori Unit 1 has been performed since 1993. Meanwhile, periodic safety review (PSR) for all operating nuclear power plants (NPPs) has been started with Kori Unit 1 since 2000 per IAEA recommendation. The evaluation period is 10 years, and safety (evaluation) factors are 11 per IAEA guidelines as represented in table 1. The relationship between PSR factors and PLIM is also represented. Among these factors evaluation of 'management of aging' is one of the most important and difficult factor. This factor is related to 'actual condition of the NPP', 'use of experience from other nuclear NPPs and of research findings', and 'management of aging'. The object of 'management of aging' is to obtain plant safety through identifying actual condition of system, structure and components (SSCs) and evaluating aging phenomena and residual life of SSCs using operating experience and research findings. The paper describes the scope and procedure of valuation of 'management of aging', such as, screening criteria of SSCs, Code and Standards, evaluation of SSCs and safety issues as represented. Evaluating SSCs are determined using final safety analysis report (FSAR) and power unit maintenance system for Nuclear Ver. III (PUMAS/N-III). The screening criteria of SSCs are safety-related items (quality class Q), safety-impact items (quality class T), backfitting rule items (fire protection (10CFR50.48), environmental qualification (10CFR50.49), pressurized thermal shock (10CFR50.61), anticipated transient without scram (10CFR50.62), and station blackout (10CFR50.63)) and regulating authority requiring items[1∼3]. The purpose of review of Code and Standards is identifying actual condition of the NPP and evaluating aging management using effective Code and Standards corresponding to reactor facilities. Code and Standards is composed of regulating laws, FSAR items, administrative actions, regulating actions, agreement items, and other

Creation and Support of the State of Psychological Safety of Pupils of Cadet Classes

Directory of Open Access Journals (Sweden)

Baeva I.A.,

2017-01-01

Full Text Available The author's approach to the support of psychological safety in the educational process. As cadet classes make high demands to the capabilities and resources of the child, the task of tracking these educational programs in terms of psychological safety of children is particularly relevant. The study tested the assumption that the program support the state of psychological safety, implementing a risk-resource approach and aimed at updating / generation components of psychological safety (satisfaction, protection, reference, subjective well-being of the child in the Cadet educational environment, activity, will be effective when accompanied by cadet training programs. Testing of the developed program was carried out with students of third cadet classes (53 people in the experimental group and 26 in the control group. components and criteria of psychological safety of the younger schoolboy were determined on the basis of theoretical analysis. The methods of interrogation (questioning, testing, projective method examined the children, parents and teachers in the cadet classes to identify the initial and final levels of psychological safety of younger students. Statistical analysis were used cluster and discriminant analysis, chi-square test for contingency tables, sign test G. The article describes the features of the program, aimed at the formation and maintenance of psychological safety of younger pupils, pupils of cadet classes. The efficiency of it on all the selected criteria with a level of significance of not more than p <0,005. Ideas forming program can be used in the practice of psychological work in schools, as well as for further research of psychological safety of children in the educational environment of schools of different types and species.

Cold Vacuum Drying Safety Class Instrumentation and Control System Design Description

International Nuclear Information System (INIS)

WHITEHURST, R.

1999-01-01

This document describes the Cold Vacuum Drying Facility (CVDF) Safety Class Instrumentation and Control system (SCIC). The SCIC provides safety functions and features to protect the environment, off-site and on-site personnel and equipment. The function of the SCIC is to provide automatic trip features, valve interlocks, alarms, indication and control for the cold vacuum drying process

Safety learning from drugs of the same class

DEFF Research Database (Denmark)

Stefansdottir, G; Knol, M J; Arnardottir, A H

2012-01-01

This study was aimed at assessing the extent of safety learning from data pertaining to other drugs of the same class. We studied drug classes for which the first and second drugs were centrally registered in the European Union from 1995 to 2008. We assessed whether adverse drug reactions (ADRs......) associated with one of the drugs also appeared in the Summary of Product Characteristics (SPC) of the other drug, either initially or during the postmarketing phase. We identified 977 ADRs from 19 drug pairs, of which 393 ADRs (40.2%) were listed in the SPCs of both drugs of a pair. Of these 393 that were...... present in both SPCs of a drug pair, 241 (61.3%) were present when the drug entered the market and 152 (30.7%) appeared in the postmarketing phase. The mention of ADRs in the SPCs of both same-class drugs in the postmarketing phase was associated with type A ADRs, marketing in the same regulator country...

Analysis on typical illegal events for nuclear safety class 1 valve

International Nuclear Information System (INIS)

Tian Dongqing; Gao Runsheng; Jiao Dianhui; Yang Lili; Chen Peng

2014-01-01

Illegal welding events of nuclear safety class l valve forging occurred to the manufacturer, while the valve was returned to be repaired. Illegal nondestructive test event of nuclear safety class valve occurred also to the manufacturer in the manufacturing process. The two events have resulted in quality incipient fault for the installed valves and the valves in the manufacturing process. It was reflected that operation of the factory quality assurance system isn't activated, and nuclear power engineering and operating company have insufficient supervision. The event-related parties should strengthen quality management and process control, get rid of the quality incipient fault, and experience feedback should be done well to guarantee quality of equipment in nuclear power plant. (authors)

The Designing Bus for Nuclear Safety Class Controller

Energy Technology Data Exchange (ETDEWEB)

Lee, Dongil; Lee, Myeongkyun; Yun, Donghwa [PONUTech Co,. Ltd., Research Institute, Ulsan (Korea, Republic of); Ryoo, Kwangki [Hanbat National Univ., Daejeon (Korea, Republic of)

2013-10-15

EtherCAT (Ethernet for Control Automation Technology) is based on the IEEE 802.3 standard as one of the communication which is the I/O (Input/Output), sensors and communication function of PLC (Programmable Logic Controller) in industry and factory environment use is increasing. The Nuclear Safety Class Controller implemented by the EtherCAT applied bus can be shown the improving performance of data transmission in the controller.

The Designing Bus for Nuclear Safety Class Controller

International Nuclear Information System (INIS)

Lee, Dongil; Lee, Myeongkyun; Yun, Donghwa; Ryoo, Kwangki

2013-01-01

EtherCAT (Ethernet for Control Automation Technology) is based on the IEEE 802.3 standard as one of the communication which is the I/O (Input/Output), sensors and communication function of PLC (Programmable Logic Controller) in industry and factory environment use is increasing. The Nuclear Safety Class Controller implemented by the EtherCAT applied bus can be shown the improving performance of data transmission in the controller

Interaction analysis method for the Hanford Waste Vitrification Plant

International Nuclear Information System (INIS)

Grant, P.R.; Deshotels, R.L.; Van Katwijk, C.

1993-01-01

In order to anticipate potential problems as early as possible during the design effort, a method for interaction analysis was developed to meet the specific hazards of the Hanford Waste Vitrification Plant (HWVP). The requirement for interaction analysis is given in DOE Order 6430.1B and DOE-STD-1021-92. The purpose of the interaction analysis is to ensure that non-safety class items will not fail in a manner that will adversely affect the ability of any safety class item to perform its safety function. In the HWVP there are few structures, equipment, or controls that are safety class (those with a direct safety function, i.e., confinement of waste). In addition to damage due to failure of non-safety class items as a result of natural phenomena, threats to HWVP safety class items include the following: room flooding from firewater, leakage of chemically reactive liquids, high-pressure gas impingement from leaking piping, rocket-type impact from broken pressurized gas cylinders, loss of control of mobile equipment, cryogenic liquid spill, fire, and smoke. The time needed to perform the interaction analysis is minimized by consolidating safety class items into segregated areas. Each area containing safety class items is evaluated, and any potential threat to the safety functions is noted. After relocation of safety class items is considered, items that pose a threat are generally upgraded to eliminate the threat to the safety class items. Upgraded items are designed to not fail under the conditions being evaluated. Upgrading is the preferred option when relocation is not possible. Other options are to provide barriers, design the safety class item not to be damaged by failed items, or rely on redundancy and isolation from local threats. The upgraded features of non-safety class items are designed to the same quality standards as the safety class items

Development of standards and investigation of safety examination items for advancement of safety regulation of fast breeder reactor

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

The purposes of this study are to prepare the fuel technical standard and the structure and materials standard of fast breeder reactors (FBRs), and to develop the requirements in a reactor establishment permission. The objects of this study are mainly the Monju high performance core and a demonstration FBR. In JFY 2012, the following results were obtained. As for the fuel technical standard, the fuel technical standard adapting the examination of integrity of the FBR fuels was prepared based on the information and data obtained in this study. As for the structure and material standard, the investigation of the revised parts of the standard was carried out. And as for the examination of the safety requirements, safety evaluation items for the future FBR plant and the fission products to be considered in a reactor establishment permission were investigated and examined. (author)

Spare Items validation

International Nuclear Information System (INIS)

Fernandez Carratala, L.

1998-01-01

There is an increasing difficulty for purchasing safety related spare items, with certifications by manufacturers for maintaining the original qualifications of the equipment of destination. The main reasons are, on the top of the logical evolution of technology, applied to the new manufactured components, the quitting of nuclear specific production lines and the evolution of manufacturers quality systems, originally based on nuclear codes and standards, to conventional industry standards. To face this problem, for many years different Dedication processes have been implemented to verify whether a commercial grade element is acceptable to be used in safety related applications. In the same way, due to our particular position regarding the spare part supplies, mainly from markets others than the american, C.N. Trillo has developed a methodology called Spare Items Validation. This methodology, which is originally based on dedication processes, is not a single process but a group of coordinated processes involving engineering, quality and management activities. These are to be performed on the spare item itself, its design control, its fabrication and its supply for allowing its use in destinations with specific requirements. The scope of application is not only focussed on safety related items, but also to complex design, high cost or plant reliability related components. The implementation in C.N. Trillo has been mainly curried out by merging, modifying and making the most of processes and activities which were already being performed in the company. (Author)

Fatigue check of nuclear safety class 1 reactor coolant pipe

International Nuclear Information System (INIS)

Wang Qing; Fang Yonggang; Chu Qibao; Xu Yu; Li Hailong

2015-01-01

Fatigue and thermal ratcheting analyses of nuclear safety Class 1 reactor coolant pipe in a nuclear power plant were independently carried out in this paper. The software used for calculation is ROCOCO, which is based on RCC-M code. The difference of nuclear safety Class 1 pipe fatigue evaluation between RCC-M code and ASME code was compared. The main aspects of comparison include the calculation scoping of fatigue design, the calculation method of primary plus secondary stress intensity, the elastic-plastic correction coefficient calculation, and the dynamic load combination method etc. By correcting inconsistent algorithm of ASME code within ROCOCO, the fatigue usage factor and thermal ratcheting design margin of 65 mm and 55 mm wall thickness of the pipe were obtained. The results show that the minimum wall thickness of the pipe must exceed 55 mm and the design value of the thermal ratcheting of 55 mm wall thickness reaches 95% of the allowable value. (authors)

Dedication for Safety-Related Fuses used in Class-1E Power System

International Nuclear Information System (INIS)

Hong, Younghee

2014-01-01

The safety-related fuses used in class-1E power system provide overcurrent protection for electrical system and isolate the class 1E circuit from a fault or overload condition. These days, the number of nuclear grade suppliers has been reduced. Accordingly, commercial grade, instead of safety-related, fuses are procured and used in the utilities through the dedication process. Therefore, this paper introduces the commercial grade fuse dedication process/engineering and how to assure the quality requirements with this process and engineering. The fuses used in class-1E power system are to protect overcurrent and to isolate fault. Therefore the fuse for acceptance in order to improve the quality and reliability for commercial grade fuses shall be dedicated. The fuse resistance value may be useful as an indicator of acceptance. The current carrying capacity test can change the fuse performance properties. Therefore these critical characteristics are needed for additional review and analysis with fuse manufactures

Sources of interference in item and associative recognition memory.

Science.gov (United States)

Osth, Adam F; Dennis, Simon

2015-04-01

A powerful theoretical framework for exploring recognition memory is the global matching framework, in which a cue's memory strength reflects the similarity of the retrieval cues being matched against the contents of memory simultaneously. Contributions at retrieval can be categorized as matches and mismatches to the item and context cues, including the self match (match on item and context), item noise (match on context, mismatch on item), context noise (match on item, mismatch on context), and background noise (mismatch on item and context). We present a model that directly parameterizes the matches and mismatches to the item and context cues, which enables estimation of the magnitude of each interference contribution (item noise, context noise, and background noise). The model was fit within a hierarchical Bayesian framework to 10 recognition memory datasets that use manipulations of strength, list length, list strength, word frequency, study-test delay, and stimulus class in item and associative recognition. Estimates of the model parameters revealed at most a small contribution of item noise that varies by stimulus class, with virtually no item noise for single words and scenes. Despite the unpopularity of background noise in recognition memory models, background noise estimates dominated at retrieval across nearly all stimulus classes with the exception of high frequency words, which exhibited equivalent levels of context noise and background noise. These parameter estimates suggest that the majority of interference in recognition memory stems from experiences acquired before the learning episode. (c) 2015 APA, all rights reserved).

Critical Characteristics of Radiation Detection System Components to be Dedicated for use in Safety Class and Safety Significant System

International Nuclear Information System (INIS)

DAVIS, S.J.

2000-01-01

This document identifies critical characteristics of components to be dedicated for use in Safety Significant (SS) Systems, Structures, or Components (SSCs). This document identifies the requirements for the components of the common, radiation area, monitor alarm in the WESF pool cell. These are procured as Commercial Grade Items (CGI), with the qualification testing and formal dedication to be performed at the Waste Encapsulation Storage Facility (WESF) for use in safety significant systems. System modifications are to be performed in accordance with the approved design. Components for this change are commercially available and interchangeable with the existing alarm configuration This document focuses on the operational requirements for alarm, declaration of the safety classification, identification of critical characteristics, and interpretation of requirements for procurement. Critical characteristics are identified herein and must be verified, followed by formal dedication, prior to the components being used in safety related applications

Science Library of Test Items. Volume Eighteen. A Collection of Multiple Choice Test Items Relating Mainly to Chemistry.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

Science Library of Test Items. Volume Seventeen. A Collection of Multiple Choice Test Items Relating Mainly to Biology.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

Science Library of Test Items. Volume Nineteen. A Collection of Multiple Choice Test Items Relating Mainly to Geology.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

A Framework for Seismic Design of Items in Safety-Critical Facilities for Implementing a Risk-Informed Defense-in-Depth-Based Concept

Directory of Open Access Journals (Sweden)

Tatsuya Itoi

2017-05-01

Full Text Available Recently, especially after the 2011 off the Pacific coast of Tohoku earthquake and the Fukushima Daiichi nuclear power plant accident, the need for treating residual risks and cliff-edge effects in safety-critical facilities has been widely recognized as an extremely important issue. In this article, the sophistication of seismic designs in safety-critical facilities is discussed from the viewpoint of mitigating the consequences of accidents, such as the avoidance of cliff-edge effects. For this purpose, the implementation of a risk-informed defense-in-depth-based framework is proposed in this study. A basic framework that utilizes diversity in the dynamic characteristics of items and also provides additional seismic margin to items important for safety when needed is proposed to prevent common cause failure and to avoid cliff-edge effects as far as practicable. The proposed method is demonstrated to be effective using an example calculation.

Science Library of Test Items. Volume Twenty-Two. A Collection of Multiple Choice Test Items Relating Mainly to Skills.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

Science Library of Test Items. Volume Twenty. A Collection of Multiple Choice Test Items Relating Mainly to Physics, 1.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

Procedure for getting safety classed concrete structures approved by Finnish Radiation and Nuclear Safety Authority

International Nuclear Information System (INIS)

Halme, Ville-Juhani

2015-01-01

Posiva is preparing geological final disposal in the Finnish bedrock in Olkiluoto, Eurajoki. The final disposal facility includes encapsulation plant and underground repository. Most of the main civil structures are concrete structures. STUK is the supervising authority in civil structures. The National Building Code of Finland and STUK's Regulatory Guide on nuclear safety (YVL) are the most important instructions when constructing concrete structures into nuclear installation. Posiva has classified concrete structures in two classes according STUK's YVL-guidance: EYT (non-nuclear) and Safety Class 3 (SC 3, nuclear safety significance). When building SC 3 concrete structures, specific protocol must be followed. Protocol includes planned routines for design, construction, supervision, quality control (QC) and quality assurance (QA) activities. Documents relating concrete structures must be approved by Posiva and STUK before construction work. After structures have been designed and actual building is ongoing, there are two main steps. Before concreting, readiness inspection for concreting must be arranged. Readiness inspection will be arranged according to a specific plan and the date must be informed to STUK. After establishing readiness for concreting, casting work can begin. Once concrete structures are done, inspected and approved, final documentation according to a quality control plan will be reviewed by Posiva. After Posiva's approval, final documentation will be sent for STUK's approval. In the end STUK will give the permission for commissioning of the concrete structures after approved commissioning inspection. The document is made up of an abstract and a poster

General mixture item response models with different item response structures: Exposition with an application to Likert scales.

Science.gov (United States)

Tijmstra, Jesper; Bolsinova, Maria; Jeon, Minjeong

2018-01-10

This article proposes a general mixture item response theory (IRT) framework that allows for classes of persons to differ with respect to the type of processes underlying the item responses. Through the use of mixture models, nonnested IRT models with different structures can be estimated for different classes, and class membership can be estimated for each person in the sample. If researchers are able to provide competing measurement models, this mixture IRT framework may help them deal with some violations of measurement invariance. To illustrate this approach, we consider a two-class mixture model, where a person's responses to Likert-scale items containing a neutral middle category are either modeled using a generalized partial credit model, or through an IRTree model. In the first model, the middle category ("neither agree nor disagree") is taken to be qualitatively similar to the other categories, and is taken to provide information about the person's endorsement. In the second model, the middle category is taken to be qualitatively different and to reflect a nonresponse choice, which is modeled using an additional latent variable that captures a person's willingness to respond. The mixture model is studied using simulation studies and is applied to an empirical example.

Cold Vacuum Drying Safety Class Instrumentation and Control System Design Description SYS 93-2

International Nuclear Information System (INIS)

WHITEHURST, R.

1999-01-01

This document describes the Cold Vacuum Drying Facility (CVDF) Safety Class Instrumentation and Control system (SCIC). The SCIC provides safety functions and features to protect the environment, off-site and on-site personnel and equipment. The function of the SCIC is to provide automatic trip features, valve interlocks, alarms, indication and control for the cold vacuum drying process

Commercial grade item (CGI) dedication of MDR relays for nuclear safety related applications

Science.gov (United States)

Das, Ranjit K.; Julka, Anil; Modi, Govind

1994-08-01

MDR relays manufactured by Potter & Brumfield (P&B) have been used in various safety related applications in commercial nuclear power plants. These include emergency safety features (ESF) actuation systems, emergency core cooling systems (ECCS) actuation, and reactor protection systems. The MDR relays manufactured prior to May 1990 showed signs of generic failure due to corrosion and outgassing of coil varnish. P&B has made design changes to correct these problems in relays manufactured after May 1990. However, P&B does not manufacture the relays under any 10CFR50 Appendix B quality assurance (QA) program. They manufacture the relays under their commercial QA program and supply these as commercial grade items. This necessitates CGI Dedication of these relays for use in nuclear-safety-related applications. This paper presents a CGI dedication program that has been used to dedicate the MDR relays manufactured after been used to dedicate the MDR relays manufactured after May 1990. The program is in compliance with current Nuclear Regulatory Commission (NRC) and Electric Power Research Institute (EPRI) guidelines and applicable industry standards; it specifies the critical characteristics of the relays, provides the tests and analysis required to verify the critical characteristics, the acceptance criteria for the test results, performs source verification to quality P&B for its control of the critical characteristics, and provides documentation. The program provides reasonable assurance that the new MDR relays will perform their intended safety functions.

41 CFR 101-26.605 - Items other than petroleum products and electronic items available from the Defense Logistics...

Science.gov (United States)

2010-07-01

... petroleum products and electronic items available from the Defense Logistics Agency. 101-26.605 Section 101... available from the Defense Logistics Agency. Agencies required to use GSA supply sources should also use... Logistics Agency, the catalog will contain only those items in Federal supply classification classes which...

Science Library of Test Items. Volume Twenty-One. A Collection of Multiple Choice Test Items Relating Mainly to Physics, 2.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

QA in the procurement of items and services

International Nuclear Information System (INIS)

Wilhelm, H.

1980-01-01

Procurement of items and services is one of the important elements during the design and construction of Nuclear Power Plants. The purchaser has to establish and implement controls over the procurement process to ensure that the quality criteria, quality level and other quality requirements specified for the particuliar item or service are taken into account. The effect on safety of an error in service or the malfunction of an item is the most important factor to be considered in determining the extent of quality assurance efforts. A typical example of a procurement process will be demonstrated for safety related mechanical components. (orig./RW)

Binary classification of items of interest in a repeatable process

Science.gov (United States)

Abell, Jeffrey A.; Spicer, John Patrick; Wincek, Michael Anthony; Wang, Hui; Chakraborty, Debejyo

2014-06-24

A system includes host and learning machines in electrical communication with sensors positioned with respect to an item of interest, e.g., a weld, and memory. The host executes instructions from memory to predict a binary quality status of the item. The learning machine receives signals from the sensor(s), identifies candidate features, and extracts features from the candidates that are more predictive of the binary quality status relative to other candidate features. The learning machine maps the extracted features to a dimensional space that includes most of the items from a passing binary class and excludes all or most of the items from a failing binary class. The host also compares the received signals for a subsequent item of interest to the dimensional space to thereby predict, in real time, the binary quality status of the subsequent item of interest.

Safety quality classification test of the sealed neutron sources used in start-up neutron source rods for Qinshan Nuclear Power Plant

International Nuclear Information System (INIS)

Yao Chunbing; Guo Gang; Chao Jinglan; Duan Liming

1992-01-01

According to the regulations listed in the GB4075, the safety quality classification tests have been carried out for the neutron sources. The test items include temperature, external pressure, impact, vibration and puncture, Two dummy sealed sources are used for each test item. The testing equipment used have been examined and verified to be qualified by the measuring department which is admitted by the National standard Bureau. The leak rate of each tested sample is measured by UL-100 Helium Leak Detector (its minimum detectable leak rate is 1 x 10 -10 Pa·m 3 ·s -1 ). The samples with leak rate less than 1.33 x 10 -8 Pa·m 3 ·s -1 are considered up to the standard. The test results show the safety quality classification class of the neutron sources have reached the class of GB/E66545 which exceeds the preset class

Technical Evaluation for the Determination of CGI Designation for Safety Class Items Incorporated in Hose-in-Hose Transfer Line Assemblies

International Nuclear Information System (INIS)

BUCHANAN, J.R.

2000-01-01

The purpose of this technical evaluation is to determine whether the secondary hoses are to be categorized as Commercial Grade Items (CGI) or Engineered Equipment. This determination will identify whether or not use of the CGI Dedication process is appropriate

Editorial Changes and Item Performance: Implications for Calibration and Pretesting

Directory of Open Access Journals (Sweden)

Heather Stoffel

2014-11-01

Full Text Available Previous research on the impact of text and formatting changes on test-item performance has produced mixed results. This matter is important because it is generally acknowledged that any change to an item requires that it be recalibrated. The present study investigated the effects of seven classes of stylistic changes on item difficulty, discrimination, and response time for a subset of 65 items that make up a standardized test for physician licensure completed by 31,918 examinees in 2012. One of two versions of each item (original or revised was randomly assigned to examinees such that each examinee saw only two experimental items, with each item being administered to approximately 480 examinees. The stylistic changes had little or no effect on item difficulty or discrimination; however, one class of edits -' changing an item from an open lead-in (incomplete statement to a closed lead-in (direct question -' did result in slightly longer response times. Data for nonnative speakers of English were analyzed separately with nearly identical results. These findings have implications for the conventional practice of repretesting (or recalibrating items that have been subjected to minor editorial changes.

40 CFR 2.207 - Class determinations.

Science.gov (United States)

2010-07-01

... Confidentiality of Business Information § 2.207 Class determinations. (a) The General Counsel may make and issue a... items of business information; (2) One or more characteristics common to all such items of information... § 2.204(b)(1), § 2.204(d), § 2.205(d), or § 2.206. However, the existence of a class determination...

Functional verification of a safety class controller for NPPs using a UVM register Model

Energy Technology Data Exchange (ETDEWEB)

Kim, Kyu Chull [Dept. of Applied Computer Engineering, Dankook University, Cheonan (Korea, Republic of)

2014-06-15

A highly reliable safety class controller for NPPs (Nuclear Power Plants) is mandatory as even a minor malfunction can lead to disastrous consequences for people, the environment or the facility. In order to enhance the reliability of a safety class digital controller for NPPs, we employed a diversity approach, in which a PLC-type controller and a PLD-type controller are to be operated in parallel. We built and used structured testbenches based on the classes supported by UVM for functional verification of the PLD-type controller designed for NPPs. We incorporated a UVM register model into the testbenches in order to increase the controllability and the observability of the DUT(Device Under Test). With the increased testability, we could easily verify the datapaths between I/O ports and the register sets of the DUT, otherwise we had to perform black box tests for the datapaths, which is very cumbersome and time consuming. We were also able to perform constrained random verification very easily and systematically. From the study, we confirmed the various advantages of using the UVM register model in verification such as scalability, reusability and interoperability, and set some design guidelines for verification of the NPP controllers.

Negative affect impairs associative memory but not item memory.

Science.gov (United States)

Bisby, James A; Burgess, Neil

2013-12-17

The formation of associations between items and their context has been proposed to rely on mechanisms distinct from those supporting memory for a single item. Although emotional experiences can profoundly affect memory, our understanding of how it interacts with different aspects of memory remains unclear. We performed three experiments to examine the effects of emotion on memory for items and their associations. By presenting neutral and negative items with background contexts, Experiment 1 demonstrated that item memory was facilitated by emotional affect, whereas memory for an associated context was reduced. In Experiment 2, arousal was manipulated independently of the memoranda, by a threat of shock, whereby encoding trials occurred under conditions of threat or safety. Memory for context was equally impaired by the presence of negative affect, whether induced by threat of shock or a negative item, relative to retrieval of the context of a neutral item in safety. In Experiment 3, participants were presented with neutral and negative items as paired associates, including all combinations of neutral and negative items. The results showed both above effects: compared to a neutral item, memory for the associate of a negative item (a second item here, context in Experiments 1 and 2) is impaired, whereas retrieval of the item itself is enhanced. Our findings suggest that negative affect impairs associative memory while recognition of a negative item is enhanced. They support dual-processing models in which negative affect or stress impairs hippocampal-dependent associative memory while the storage of negative sensory/perceptual representations is spared or even strengthened.

Quality assurance in the procurement of items and services for nuclear power plants

International Nuclear Information System (INIS)

1979-01-01

This Safety Guide was prepared as part of the Agency's programme, referred to as the NUSS programme, for establishing Codes of Practice and Safety Guides relating to nuclear power plants. It supplements the Agency's Code of Practice on Quality Assurance for Safety in Nuclear Power Plants (Safety Series No.50-C-QA), which states requirements for the control of procurement of items and services which are important to the safety of nuclear power plants, for the purpose of achieving quality. The establishment and implementation of controls over the procurement process provide a basis for establishing an appropriate level of confidence that the activities undertaken during procurement of items and services have been performed in accordance with the principles of quality assurance expressed in the Code, and that the required quality of items and services has been achieved. The purchaser, in establishing control over procurement, shall ensure that the quality criteria, quality level, and other quality requirements specified for the particular item or service are taken into account

Introducing Laboratory Safety.

Science.gov (United States)

DeLorenzo, Ronald

1985-01-01

Presents a simple, 10-item quiz designed to make students aware that they must learn laboratory safety. The items include questions on acid/base accidents, several types of fire extinguishers, and safety glassses. Answers and some explanations are included. (DH)

Suspect/Counterfeit Items Information Guide for Subcontractors/Suppliers

Energy Technology Data Exchange (ETDEWEB)

Tessmar, Nancy D. [Los Alamos National Laboratory; Salazar, Michael J. [Los Alamos National Laboratory

2012-09-18

Counterfeiting of industrial and commercial grade items is an international problem that places worker safety, program objectives, expensive equipment, and security at risk. In order to prevent the introduction of Suspect/Counterfeit Items (S/CI), this information sheet is being made available as a guide to assist in the implementation of S/CI awareness and controls, in conjunction with subcontractor's/supplier's quality assurance programs. When it comes to counterfeit goods, including industrial materials, items, and equipment, no market is immune. Some manufactures have been known to misrepresent their products and intentionally use inferior materials and processes to manufacture substandard items, whose properties can significantly cart from established standards and specifications. These substandard items termed by the Department of Energy (DOE) as S/CI, pose immediate and potential threats to the safety of DOE and contractor workers, the public, and the environment. Failure of certain systems and processes caused by an S/CI could also have national security implications at Los Alamos National Laboratory (LANL). Nuclear Safety Rules (federal Laws), DOE Orders, and other regulations set forth requirements for DOE contractors to implement effective controls to assure that items and services meet specified requirements. This includes techniques to implement and thereby minimizing the potential threat of entry of S/CI to LANL. As a qualified supplier of goods or services to the LANL, your company will be required to establish and maintain effective controls to prevent the introduction of S/CI to LANL. This will require that your company warrant that all items (including their subassemblies, components, and parts) sold to LANL are genuine (i.e. not counterfeit), new, and unused, and conform to the requirements of the LANL purchase orders/contracts unless otherwise approved in writing to the Los Alamos National Security (LANS) contract administrator

Investigating the Impact of Item Parameter Drift for Item Response Theory Models with Mixture Distributions

Directory of Open Access Journals (Sweden)

Yoon Soo ePark

2016-02-01

Full Text Available This study investigates the impact of item parameter drift (IPD on parameter and ability estimation when the underlying measurement model fits a mixture distribution, thereby violating the item invariance property of unidimensional item response theory (IRT models. An empirical study was conducted to demonstrate the occurrence of both IPD and an underlying mixture distribution using real-world data. Twenty-one trended anchor items from the 1999, 2003, and 2007 administrations of Trends in International Mathematics and Science Study (TIMSS were analyzed using unidimensional and mixture IRT models. TIMSS treats trended anchor items as invariant over testing administrations and uses pre-calibrated item parameters based on unidimensional IRT. However, empirical results showed evidence of two latent subgroups with IPD. Results showed changes in the distribution of examinee ability between latent classes over the three administrations. A simulation study was conducted to examine the impact of IPD on the estimation of ability and item parameters, when data have underlying mixture distributions. Simulations used data generated from a mixture IRT model and estimated using unidimensional IRT. Results showed that data reflecting IPD using mixture IRT model led to IPD in the unidimensional IRT model. Changes in the distribution of examinee ability also affected item parameters. Moreover, drift with respect to item discrimination and distribution of examinee ability affected estimates of examinee ability. These findings demonstrate the need to caution and evaluate IPD using a mixture IRT framework to understand its effect on item parameters and examinee ability.

Investigating the Impact of Item Parameter Drift for Item Response Theory Models with Mixture Distributions.

Science.gov (United States)

Park, Yoon Soo; Lee, Young-Sun; Xing, Kuan

2016-01-01

This study investigates the impact of item parameter drift (IPD) on parameter and ability estimation when the underlying measurement model fits a mixture distribution, thereby violating the item invariance property of unidimensional item response theory (IRT) models. An empirical study was conducted to demonstrate the occurrence of both IPD and an underlying mixture distribution using real-world data. Twenty-one trended anchor items from the 1999, 2003, and 2007 administrations of Trends in International Mathematics and Science Study (TIMSS) were analyzed using unidimensional and mixture IRT models. TIMSS treats trended anchor items as invariant over testing administrations and uses pre-calibrated item parameters based on unidimensional IRT. However, empirical results showed evidence of two latent subgroups with IPD. Results also showed changes in the distribution of examinee ability between latent classes over the three administrations. A simulation study was conducted to examine the impact of IPD on the estimation of ability and item parameters, when data have underlying mixture distributions. Simulations used data generated from a mixture IRT model and estimated using unidimensional IRT. Results showed that data reflecting IPD using mixture IRT model led to IPD in the unidimensional IRT model. Changes in the distribution of examinee ability also affected item parameters. Moreover, drift with respect to item discrimination and distribution of examinee ability affected estimates of examinee ability. These findings demonstrate the need to caution and evaluate IPD using a mixture IRT framework to understand its effects on item parameters and examinee ability.

Research on the evaluation model of the software reliability in nuclear safety class digital instrumentation and control system

International Nuclear Information System (INIS)

Liu Ying; Yang Ming; Li Fengjun; Ma Zhanguo; Zeng Hai

2014-01-01

In order to analyze the software reliability (SR) in nuclear safety class digital instrumentation and control system (D-I and C), firstly, the international software design standards were analyzed, the standards' framework was built, and we found that the D-I and C software standards should follow the NUREG-0800 BTP7-14, according to the NRC NUREG-0800 review of requirements. Secondly, the quantitative evaluation model of SR using Bayesian Belief Network and thirteen sub-model frameworks were established. Thirdly, each sub-models and the weight of corresponding indexes in the evaluation model were analyzed. Finally, the safety case was introduced. The models lay a foundation for review and quantitative evaluation on the SR in nuclear safety class D-I and C. (authors)

Development of a Microsoft Excel tool for one-parameter Rasch model of continuous items: an application to a safety attitude survey.

Science.gov (United States)

Chien, Tsair-Wei; Shao, Yang; Kuo, Shu-Chun

2017-01-10

Many continuous item responses (CIRs) are encountered in healthcare settings, but no one uses item response theory's (IRT) probabilistic modeling to present graphical presentations for interpreting CIR results. A computer module that is programmed to deal with CIRs is required. To present a computer module, validate it, and verify its usefulness in dealing with CIR data, and then to apply the model to real healthcare data in order to show how the CIR that can be applied to healthcare settings with an example regarding a safety attitude survey. Using Microsoft Excel VBA (Visual Basic for Applications), we designed a computer module that minimizes the residuals and calculates model's expected scores according to person responses across items. Rasch models based on a Wright map and on KIDMAP were demonstrated to interpret results of the safety attitude survey. The author-made CIR module yielded OUTFIT mean square (MNSQ) and person measures equivalent to those yielded by professional Rasch Winsteps software. The probabilistic modeling of the CIR module provides messages that are much more valuable to users and show the CIR advantage over classic test theory. Because of advances in computer technology, healthcare users who are familiar to MS Excel can easily apply the study CIR module to deal with continuous variables to benefit comparisons of data with a logistic distribution and model fit statistics.

Is there an agreement among the items of the Korean physical therapist licensing examination, learning objectives of class subjects, and physical therapists' job descriptions?

Science.gov (United States)

Kang, Min-Hyeok; Kwon, Oh-Yun; Kim, Yong-Wook; Kim, Ji-Won; Kim, Tae-Ho; Oh, Tae-Young; Weon, Jong-Hyuk; Lee, Tae-Sik; Oh, Jae-Seop

2016-01-01

To determine the agreement among the items of the Korean physical therapist licensing examination, learning objectives of class subjects, and physical therapists' job descriptions. The main tasks of physical therapists were classified, and university courses related to the main tasks were also classified. Frequency analysis was used to determine the proportions of credits for the classified courses out of the total credits of major subjects, exam items related to the classified courses out of the total number of exam items, and universities that offer courses related to the Korean physical therapist licensing examination among the surveyed universities. The proportions of credits for clinical decision making and physical therapy diagnosis-related courses out of the total number credits for major subjects at universities were relatively low (2.06% and 2.58%, respectively). Although the main tasks of physical therapists are related to diagnosis and evaluation, the proportion of physiotherapy intervention-related items (35%) was higher than that of examination and evaluation-related items (25%) on the Korean physical therapist licensing examination. The percentages of universities that offer physical therapy diagnosis and clinical decision making-related courses were 58.62% and 68.97%, respectively. Both the proportion of physiotherapy diagnosis and evaluation-related items on the Korean physical therapist licensing examination, and the number of subjects related to clinical decision making and physical therapy diagnosis in the physical therapy curriculum, should be increased to ensure that the examination items and physical therapy curriculum reflect the practical tasks of physical therapists.

Managing suspect and counterfeit items in the nuclear industry

International Nuclear Information System (INIS)

2000-08-01

Some manufacturers and suppliers use inferior materials and processes to make substandard supplies whose properties can vary significantly from established standards and specifications. Other suppliers distribute items that they know do not meet the purchase requirements or provide documentation that misrepresent actual conformance to established specifications and standards. These substandard supplies, or suspect/counterfeit items (S/CIs), pose potential threats to the safety of workers, the public and the environment and may also have a detrimental effect on security and operations at nuclear facilities. Nuclear facilities often procure and use commercial-grade items and the quality assurance policies/procedures and procurement methods are not always properly applied to avoid the entry of S/Cls into those facilities. This publication offers practical guidance on how to apply existing quality assurance programmes to effectively prevent the procurement and use of S/Cls. In particular, it provides a practical method of applying the requirements and guidance contained in the IAEA Safety Series 50-C/SG-Q: Code and Safety Guides on Quality Assurance for Safety in Nuclear Power Plants and other Nuclear Installations (1996), to the S/CIs issue

Development of a Microsoft Excel tool for one-parameter Rasch model of continuous items: an application to a safety attitude survey

Directory of Open Access Journals (Sweden)

Tsair-Wei Chien

2017-01-01

Full Text Available Abstract Background Many continuous item responses (CIRs are encountered in healthcare settings, but no one uses item response theory’s (IRT probabilistic modeling to present graphical presentations for interpreting CIR results. A computer module that is programmed to deal with CIRs is required. To present a computer module, validate it, and verify its usefulness in dealing with CIR data, and then to apply the model to real healthcare data in order to show how the CIR that can be applied to healthcare settings with an example regarding a safety attitude survey. Methods Using Microsoft Excel VBA (Visual Basic for Applications, we designed a computer module that minimizes the residuals and calculates model’s expected scores according to person responses across items. Rasch models based on a Wright map and on KIDMAP were demonstrated to interpret results of the safety attitude survey. Results The author-made CIR module yielded OUTFIT mean square (MNSQ and person measures equivalent to those yielded by professional Rasch Winsteps software. The probabilistic modeling of the CIR module provides messages that are much more valuable to users and show the CIR advantage over classic test theory. Conclusions Because of advances in computer technology, healthcare users who are familiar to MS Excel can easily apply the study CIR module to deal with continuous variables to benefit comparisons of data with a logistic distribution and model fit statistics.

Study on safety classifications of software used in nuclear power plants and distinct applications of verification and validation activities in each class

International Nuclear Information System (INIS)

Kim, B. R.; Oh, S. H.; Hwang, H. S.; Kim, D. I.

2000-01-01

This paper describes the safety classification regarding instrumentation and control (I and C) systems and their software used in nuclear power plants, provides regulatory positions for software important to safety, and proposes verification and validation (V and V) activities applied differently in software classes which are important elements in ensuring software quality assurance. In other word, the I and C systems important to safety are classified into IC-1, IC-2, IC-3, and Non-IC and their software are classified into safety-critical, safety-related, and non-safety software. Based upon these safety classifications, the extent of software V and V activities in each class is differentiated each other. In addition, the paper presents that the software for use in I and C systems important to safety is divided into newly-developed and previously-developed software in terms of design and implementation, and provides the regulatory positions on each type of software

Closeout of IE Bulletin 84-02: Failures of General Electric Type HFA relays in use in Class 1E safety systems

International Nuclear Information System (INIS)

Foley, W.J.; Dean, R.S.; Hennick, A.

1991-01-01

Documentation is provided in this report to close IE Bulletin 84--02 regarding the failure of General Electric Type HFA relays in Class 1E safety systems. The relay failures were due to aging of coil wire insulation and nylon or Lexan spools under certain environmental conditions. The bulletin was issued to nuclear power reactor licensees and holders of construction permits to provide assurance that the manufacturer's recommendations for corrective actions would be implemented. The bulletin required four specific actions, plus a review of the general concerns of the bulletin even though some facilities had different relays from those of bulletin concern. Evaluation of utility responses, NRC/Region inspection reports, and regional telephone calls has resulted in bulletin closeout of 116 (98%) of the 118 facilities to which the bulletin was issued for action. Facilities which were shut down or had construction halted indefinitely or permanently when the report was issued are not included in this review. A follow-up item is proposed in Appendix C for the two facilities with open status. Background information is supplied in the Introduction and Appendix A

Varying levels of difficulty index of skills-test items randomly selected by examinees on the Korean emergency medical technician licensing examination.

Science.gov (United States)

Koh, Bongyeun; Hong, Sunggi; Kim, Soon-Sim; Hyun, Jin-Sook; Baek, Milye; Moon, Jundong; Kwon, Hayran; Kim, Gyoungyong; Min, Seonggi; Kang, Gu-Hyun

2016-01-01

The goal of this study was to characterize the difficulty index of the items in the skills test components of the class I and II Korean emergency medical technician licensing examination (KEMTLE), which requires examinees to select items randomly. The results of 1,309 class I KEMTLE examinations and 1,801 class II KEMTLE examinations in 2013 were subjected to analysis. Items from the basic and advanced skills test sections of the KEMTLE were compared to determine whether some were significantly more difficult than others. In the class I KEMTLE, all 4 of the items on the basic skills test showed significant variation in difficulty index (P<0.01), as well as 4 of the 5 items on the advanced skills test (P<0.05). In the class II KEMTLE, 4 of the 5 items on the basic skills test showed significantly different difficulty index (P<0.01), as well as all 3 of the advanced skills test items (P<0.01). In the skills test components of the class I and II KEMTLE, the procedure in which examinees randomly select questions should be revised to require examinees to respond to a set of fixed items in order to improve the reliability of the national licensing examination.

Varying levels of difficulty index of skills-test items randomly selected by examinees on the Korean emergency medical technician licensing examination

Directory of Open Access Journals (Sweden)

Bongyeun Koh

2016-01-01

Full Text Available Purpose: The goal of this study was to characterize the difficulty index of the items in the skills test components of the class I and II Korean emergency medical technician licensing examination (KEMTLE, which requires examinees to select items randomly. Methods: The results of 1,309 class I KEMTLE examinations and 1,801 class II KEMTLE examinations in 2013 were subjected to analysis. Items from the basic and advanced skills test sections of the KEMTLE were compared to determine whether some were significantly more difficult than others. Results: In the class I KEMTLE, all 4 of the items on the basic skills test showed significant variation in difficulty index (P<0.01, as well as 4 of the 5 items on the advanced skills test (P<0.05. In the class II KEMTLE, 4 of the 5 items on the basic skills test showed significantly different difficulty index (P<0.01, as well as all 3 of the advanced skills test items (P<0.01. Conclusion: In the skills test components of the class I and II KEMTLE, the procedure in which examinees randomly select questions should be revised to require examinees to respond to a set of fixed items in order to improve the reliability of the national licensing examination.

Probable variations of a passive safety containment for a 1700 MWe class PWR with passive safety systems

International Nuclear Information System (INIS)

Sato, Takashi; Fujiki, Yasunobu; Oikawa, Hirohide; Ofstun, Richard P.

2009-01-01

The paper presents probable variations of a passive safety containment for a PWR. The passive safety containment is named Mark P containment tentatively. It is a pressure suppression type containment for a large scale PWR with a BWR type passive containment cooling system (PCCS). More than 3-day grace period can be achieved even for a 1700 MWe class large scale PWR owing to the PCCS. The containment is a reinforced concrete containment vessel (RCCV). The design pressure of the RCCV can be low owing to the suppression pool (S/P) and no prestressed tendon is necessary. It is a single barrier CV that can withstand a large airplane crash by itself. This simple configuration results in good economy and short construction term. The BWR type passive safety systems also include the Passive Cooling and Depressurization System (PCDS). The PCDS has 3-day grace period for the SBO induced by a giant earthquake and can practically eliminate the residual risk of a giant earthquake beyond the design basis earthquake of Ss. It also has a safety function to automatically depressurize the primary system at accidents such as SGTR and eliminate the need for operator actions. It is a large 1700 MWe passive safety PWR that has more than 3-day grace period for extremely severe natural disasters including a giant earthquake, a mega hurricane, tsunami and so on; no containment failure at a SA establishing a no evacuation plant; protection for a large airplane crash with the RCCV single barrier; good economy and short construction term. (author)

Occupational safety motivation

DEFF Research Database (Denmark)

Pedersen, Louise; Kines, Pete

2010-01-01

Background: Motivation is one of the most important factors for safety behaviour and for implementing change in general. However, theoretical and psychometric studies of safety performance have traditionally treated safety motivation, safety compliance and safety participation unidimensionally....... At the same time many motivation questionnaire items are seldom founded on theory and/or do not account for the theories’ ontological and epistemological differences, e.g. of how knowledge, attitude and action are related. Present questionnaire items tap into occupational safety motivation in asking whether...... or not respondents ‘are’ motivated and whether they feel that safety is important or worthwhile. Another important aspect is ‘what’ motivates workers to comply to and participate in safety. The aim of this article is to introduce a new theory-based occupational safety motivation scale which is validated...

Seismic analysis of safety class 1 incinerator glovebox in building 232-Z 200 W Area

International Nuclear Information System (INIS)

Ocoma, E.C.

1994-09-01

This report documents the seismic evaluation for the existing safety class 1 incinerator glovebox in 232Z Building. The glovebox is no longer in use and most of the internal mechanical equipment have been removed. However, the insulation firebricks are still in the glovebox for proper disposal

Safety climate in Swiss hospital units: Swiss version of the Safety Climate Survey

Science.gov (United States)

Gehring, Katrin; Mascherek, Anna C.; Bezzola, Paula

2015-01-01

Abstract Rationale, aims and objectives Safety climate measurements are a broadly used element of improvement initiatives. In order to provide a sound and easy‐to‐administer instrument for the use in Swiss hospitals, we translated the Safety Climate Survey into German and French. Methods After translating the Safety Climate Survey into French and German, a cross‐sectional survey study was conducted with health care professionals (HCPs) in operating room (OR) teams and on OR‐related wards in 10 Swiss hospitals. Validity of the instrument was examined by means of Cronbach's alpha and missing rates of the single items. Item‐descriptive statistics group differences and percentage of ‘problematic responses’ (PPR) were calculated. Results 3153 HCPs completed the survey (response rate: 63.4%). 1308 individuals were excluded from the analyses because of a profession other than doctor or nurse or invalid answers (n = 1845; nurses = 1321, doctors = 523). Internal consistency of the translated Safety Climate Survey was good (Cronbach's alpha G erman = 0.86; Cronbach's alpha F rench = 0.84). Missing rates at item level were rather low (0.23–4.3%). We found significant group differences in safety climate values regarding profession, managerial function, work area and time spent in direct patient care. At item level, 14 out of 21 items showed a PPR higher than 10%. Conclusions Results indicate that the French and German translations of the Safety Climate Survey might be a useful measurement instrument for safety climate in Swiss hospital units. Analyses at item level allow for differentiating facets of safety climate into more positive and critical safety climate aspects. PMID:25656302

Conceptual design report for environmental, safety and health phase III FY-91 line item

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-09-01

The Mound Facility (Mound), located in Miamisburg, Ohio, is a Department of Energy (DOE) development and production facility performing support work for DOE`s weapons and energy-related programs. EG&G Mound Applied Technologies (EG&G) is the Operating Contractor (OC) for this Government-Owned, Contractor-Operated (GOCO) facility. The work performed at Mound emphasizes nuclear energy and explosives technology. Mound is currently implementing an Environmental, Safety, and Health (ES&H) Program designed to protect its employees, the public, and the environment from adverse effects caused by the facility`s activities. Design has been completed, and construction is in progress for Phase I of this multiphase program. Phase II has been submitted for fiscal year (FY) 89 funding and Phase IV is being submitted as an FY 92 line item. This Conceptual Design Report (CDR) addresses Phase III of the ES&H program.

Informatization of items quality control for NI in nuclear power plant

International Nuclear Information System (INIS)

Zhang Jiankui; Zang Baiqi

2010-01-01

Design ideas, implementation methods and some key techniques for item quality control of NI in nuclear power plant are illustrated in this article according to item quality management mode. The item quality control method can improve the quality of NI, ensure the safety and lower the construction and operation cost of nuclear power plant. (authors)

Predicting the decision to pursue mediation in civil disputes: a hierarchical classes analysis.

Science.gov (United States)

Reich, Warren A; Kressel, Kenneth; Scanlon, Kathleen M; Weiner, Gary A

2007-11-01

Clients (N = 185) involved in civil court cases completed the CPR Institute's Mediation Screen, which is designed to assist in making a decision about pursuing mediation. The authors modeled data using hierarchical classes analysis (HICLAS), a clustering algorithm that places clients into 1 set of classes and CPRMS items into another set of classes. HICLAS then links the sets of classes so that any class of clients can be identified in terms of the classes of items they endorsed. HICLAS-derived item classes reflected 2 underlying themes: (a) suitability of the dispute for a problem-solving process and (b) potential benefits of mediation. All clients who perceived that mediation would be beneficial also believed that the context of their conflict was favorable to mediation; however, not all clients who saw a favorable context believed they would benefit from mediation. The majority of clients who agreed to pursue mediation endorsed items reflecting both contextual suitability and perceived benefits of mediation.

Method to classify the safety class of Structure, System and Components in a Defueled Condition of Nuclear Power Plant

Energy Technology Data Exchange (ETDEWEB)

Kim, Dong-Hak; Jeon, Dang-Hee [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

During pre-decommissioning phase, licensing and engineering work need to change the design basis of the plant such as safety analysis report, downgrade of systems, technical specifications and program and procedures to change of NPP condition from in an operation condition to in a defueled condition. The many systems to need to operate in an operational condition will not be operated during in a defueled condition and the function of systems will be changed from in an operation condition to in a defueled condition. So a downgrade of systems may be needed and reclassifying the safety class of structure, system and component (SSC) may be conducted. By the reclassification of SSC, activity related with quality assurance and maintenance of SSC is affected. In this paper, the method to reclassify SSC in a defueled condition is studied. The many systems to need to operate in an operational condition will not be operated during in a defueled condition and the function of systems will be changed from in an operation condition to in a defueled condition. The operation of NPP during a defueled condition need to conduct licensing and engineering work need to change the design basis of the plant optimize by downgrading systems and reclassifying the safety class of SSC. In this paper, the method to reclassify safety class for a defueled condition is studied.

Development of nuclear safety class filter elements with long life and high quality

International Nuclear Information System (INIS)

Zhang Jinghua

2009-04-01

This paper describes the development on nuclear safety class filter elements with long life and high quality used for collecting radioactive contaminants, fragments of resin and impurities in primary systems of NPPs. The filter elements made of glass fibre elements are used for PWR, and of paper elements are used for PHWR. During the research, a series of tests for optimization were performed for selection of filter material and the improvement of binder. The flow rate and comprehensive performance have been measured in simulated conditions. The result shows that the application requirements for operational NPPs can be met, and the reliability and safety of the frame are also be verified. The comprehensive performance of the filter elements is equivalent to that of oversea similar products. The products have been used in NPPs in operation. (authors)

Discussion on the safety classification of nuclear safety mechanical equipment

International Nuclear Information System (INIS)

Shen Wei

2010-01-01

The purpose and definition of the equipment safety classification in nuclear plant are introduced. The differences of several safety classification criterions are compared, and the object of safety classification is determined. According to the regulation, the definition and category of the safety functions are represented. The safety classification method, safety classification process, safety class interface, and the requirement for the safety class mechanical equipment are explored. At last, the relation of the safety classification between the mechanical and electrical equipment is presented, and the relation of the safety classification between mechanical equipment and system is also presented. (author)

The Development of the Safety Related Valve Class 1E Electrical Motor, the Target and the Results

International Nuclear Information System (INIS)

Saban, I.; Grgic, D.; Fancev, T.; Flegar, Lj.; Novosel, N.

1996-01-01

The development of the safety related valves class 1E electric motor is described. The design implemented in order to satisfy the 1E requirements, and a way in which related 1E standards are addressed, are shown. The development was realized in three stages. In the first stage eight motorettes were made and the insulation system was tested. In the second stage the motor was produced in accordance with producer's prototype QA program. In the third stage part of the testing of the produced motor was made. The results of the testing, finished until now, show that produced motor, as well as similarly produced motors, is able to perform its safety function in the design bases accident conditions as requested by class 1E requirements. The rest of the testing (LOCA test) can be made on the same or similar motor in the future. (author)

Using Reversed MFCC and IT-EM for Automatic Speaker Verification

Directory of Open Access Journals (Sweden)

Sheeraz Memon

2012-01-01

Full Text Available This paper proposes text independent automatic speaker verification system using IMFCC (Inverse/ Reverse Mel Frequency Coefficients and IT-EM (Information Theoretic Expectation Maximization. To perform speaker verification, feature extraction using Mel scale has been widely applied and has established better results. The IMFCC is based on inverse Mel-scale. The IMFCC effectively captures information available at the high frequency formants which is ignored by the MFCC. In this paper the fusion of MFCC and IMFCC at input level is proposed. GMMs (Gaussian Mixture Models based on EM (Expectation Maximization have been widely used for classification of text independent verification. However EM comes across the convergence issue. In this paper we use our proposed IT-EM which has faster convergence, to train speaker models. IT-EM uses information theory principles such as PDE (Parzen Density Estimation and KL (Kullback-Leibler divergence measure. IT-EM acclimatizes the weights, means and covariances, like EM. However, IT-EM process is not performed on feature vector sets but on a set of centroids obtained using IT (Information Theoretic metric. The IT-EM process at once diminishes divergence measure between PDE estimates of features distribution within a given class and the centroids distribution within the same class. The feature level fusion and IT-EM is tested for the task of speaker verification using NIST2001 and NIST2004. The experimental evaluation validates that MFCC/IMFCC has better results than the conventional delta/MFCC feature set. The MFCC/IMFCC feature vector size is also much smaller than the delta MFCC thus reducing the computational burden as well. IT-EM method also showed faster convergence, than the conventional EM method, and thus it leads to higher speaker recognition scores.

Counterfeit and Fraudulent Items - Mitigating the risk

International Nuclear Information System (INIS)

Tannenbaum, Marc

2011-01-01

This presentation (slides) provides an overview of the industry's challenges and activities. Firstly, it outlines the differences between counterfeit, fraudulent, suspect, and also substandard items. Notice is given that items could be found not to meet the standard, but the difference in the intent to deceive with counterfeit and fraudulent items is the critical element. Examples from other industries are used which also rely heavily on the assurance of quality for safety. It also informs that EPRI has just completed a report in October 2009 in coordination with other US government agencies and industry organizations; this report, entitled Counterfeit, Substandard and Fraudulent Items, number 1019163, is available for free on the EPRI web site. As a follow-up to this report, EPRI is developing a CFSI Database; any country interested in a collaborative agreement is invited to use and contribute to the database information. Finally, it stresses the importance of the oversight of contractors, training to raise the awareness of the employees and the inspectors, and having a response plan for identified items

Multilevel Higher-Order Item Response Theory Models

Science.gov (United States)

Huang, Hung-Yu; Wang, Wen-Chung

2014-01-01

In the social sciences, latent traits often have a hierarchical structure, and data can be sampled from multiple levels. Both hierarchical latent traits and multilevel data can occur simultaneously. In this study, we developed a general class of item response theory models to accommodate both hierarchical latent traits and multilevel data. The…

Seismic qualification of safety class components in non-reactor nuclear facilities at Hanford site

International Nuclear Information System (INIS)

Ocoma, E.C.

1989-01-01

This paper presents the methods used during the walkdowns to compile as-built structural information to seismically qualify or verify the seismic adequacy of safety class components in the Plutonium Finishing Plant complex. The Plutonium finishing Plant is a non-reactor nuclear facility built during the 1950's and was designed to the Uniform Building Code criteria for both seismic and wind events. This facility is located at the US Department of Energy Hanford Site near Richland, Washington

Nuclear safety review for qualification of class 1E motor inside containment for nuclear power stations

International Nuclear Information System (INIS)

Li Shixin; Wu Qi; Zhang Yunbo; Wu Caixia

2013-01-01

In nuclear power plants with pressurized water reactors, the review for class 1E motor inside containment qualification process and documents is an important aspect of nuclear safety equipment review, and the reviewers should make evaluations for the qualification test results in terms of the compliance with standard and regulation, and the consistency with inside containment environment. Firstly, this paper introduces the qualification test of class 1E motor inside containment for nuclear power generating stations, such as aging test and design-basis-event test. Second, there is a discussion about typical problems of review. At last, comparison of IEEE334 with RCC-E is conducted and explored. (authors)

Design Review Report for formal review of safety class features of exhauster system for rotary mode core sampling

International Nuclear Information System (INIS)

JANICEK, G.P.

2000-01-01

Report documenting Formal Design Review conducted on portable exhausters used to support rotary mode core sampling of Hanford underground radioactive waste tanks with focus on Safety Class design features and control requirements for flammable gas environment operation and air discharge permitting compliance

Design Review Report for formal review of safety class features of exhauster system for rotary mode core sampling

Energy Technology Data Exchange (ETDEWEB)

JANICEK, G.P.

2000-06-08

Report documenting Formal Design Review conducted on portable exhausters used to support rotary mode core sampling of Hanford underground radioactive waste tanks with focus on Safety Class design features and control requirements for flammable gas environment operation and air discharge permitting compliance.

Quality assurance in the manufacture of items for nuclear power plants

International Nuclear Information System (INIS)

1981-01-01

This Safety Guide provides requirements and recommendations related to the establishment and implementation of a quality assurance programme for those organizations involved in the manufacture of items affecting the safety of nuclear power plants. The quality-assurance-related functions of a manufacturer may include activities such as designing, purchasing, fabricating, handling, shipping, storing, cleaning, inspecting, testing, modifying, repairing and maintaining. It is not the aim of the present Guide, which supplements the above-mentioned Code of Practice, to provide rules related to the quality assurance programme for the design of items. Manufacturers that generate designs shall follow the requirements and recommendations contained in the Safety Guide on Quality Assurance in the Design of Nuclear Power Plants (IAEA Safety Series No. 50-SG-QA6). All these publications form part of the Agency's programme, referred to as the NUSS programme, for establishing Codes of Practice and Safety Guides relating to land-based stationary thermal neutron power plants. A Provisional List of NUSS Programme Titles will be found at the end of this publication

Laser Safety Inspection Criteria

International Nuclear Information System (INIS)

Barat, K.

2005-01-01

A responsibility of the Laser Safety Officer (LSO) is to perform laser audits. The American National Standard Z136.1 Safe Use of Lasers references this requirement through several sections. One such reference is Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''. The composition, frequency and rigor of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms It is common for audit findings from one inspector or inspection to the next to vary even when reviewing the same material. How often has one heard a comment, ''well this area has been inspected several times over the years and no one ever said this or that was a problem before''. A great number of audit items, and therefore findings, are subjective because they are based on the experience and interest of the auditor to particular items on the checklist. Beam block usage, to one set of eyes might be completely adequate, while to another, inadequate. In order to provide consistency, the Laser Safety Office of the National Ignition Facility Directorate has established criteria for a number of items found on the typical laser safety audit form. The criteria are distributed to laser users. It serves two broad purposes; first, it gives the user an expectation of what will be reviewed by an auditor. Second, it is an opportunity to explain audit items to the laser user and thus the reasons for some of these items, such as labelling of beam blocks

17 CFR 229.1207 - (Item 1207) Delivery commitments.

Science.gov (United States)

2010-04-01

... information required by this Item: (1) In a form understandable to investors; and (2) Based upon the facts and... subject to priorities or curtailments which may affect quantities delivered to certain classes of... factors beyond the registrant's control that may affect the registrant's ability to meet its contractual...

Analysis of Critical Characteristics for Safety Graded Personnel Computers in the KNICS Architecture

International Nuclear Information System (INIS)

Lee, Hyun Chul; Lee, Dong Young

2009-01-01

Critical characteristics analysis of a safety related item is to identify characteristics to be verified to replace an original item with the dedicated item. It is sure that the dedicated item meeting critical characteristics would perform its intended safety function instead of the specified item. KNICS project developed two safety systems: IDiPS RPS (Reactor Protection System) and IDiPS ESF-CCS (Engineered Safety Features-Component Control System). Two safety systems of IDiPS are equipped with personnel computers, so-called COMs (Cabinet Operator Modules), in their cabinets. The personnel computers, COMs, are responsible for safety system monitoring, testing, and maintaining. Even though two safety systems are safety critical system, the personnel computers of two systems, i.e. COMs, are not graded as safety-graded items. Regulation requirements are expected to be strengthened, and the functions of the personnel computer may be enhanced to include safety-related functions and safety functions, it would be necessary that the grade of the personnel computers is adjusted to a higher level, the safety grade. To try to upgrade a non safety system, i.e. COMs, to a safety system, its safety functions and requirements, i.e. critical characteristics, must be identified and verified. This paper describes the process of the identification of critical characteristics and the results of analysis

49 CFR 375.207 - What items must be in my advertisements?

Science.gov (United States)

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false What items must be in my advertisements? 375.207 Section 375.207 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS TRANSPORTATION OF HOUSEHOLD GOODS IN INTERSTATE...

Plutonium Finishing Plant (PFP) Criticality Alarm System Commercial Grade Item (CGI) Critical Characteristics

International Nuclear Information System (INIS)

WHITE, W.F.

1999-01-01

This document specifies the critical characteristics for Commercial Grade Items (CGI) procured for PFP's criticality alarm system as required by HNF-PRO-268 and HNF-PRO-1819. These are the minimum specifications that the equipment must meet in order to properly perform its safety function. There may be several manufacturers or models that meet the critical characteristics for any one item. PFP's Criticality Alarm System includes the nine criticality alarm system panels and their associated hardware. This includes all parts up to the first breaker in the electrical distribution system. Specific system boundaries and justifications are contained in HNF-SD-CP-SDD-003, ''Definition and Means of Maintaining the Criticality Detectors and Alarms Portion of the PFP Safety Envelope.'' The procurement requirements associated with the system necessitates procurement of some system equipment as Commercial Grade Items in accordance with HNF-PRO-268, ''Control of Purchased Items and Services.''

Comprehensive Lifecycle for Assuring System Safety

Science.gov (United States)

Knight, John C.; Rowanhill, Jonathan C.

2017-01-01

CLASS is a novel approach to the enhancement of system safety in which the system safety case becomes the focus of safety engineering throughout the system lifecycle. CLASS also expands the role of the safety case across all phases of the system's lifetime, from concept formation to decommissioning. As CLASS has been developed, the concept has been generalized to a more comprehensive notion of assurance becoming the driving goal, where safety is an important special case. This report summarizes major aspects of CLASS and contains a bibliography of papers that provide additional details.

Item-focussed Trees for the Identification of Items in Differential Item Functioning.

Science.gov (United States)

Tutz, Gerhard; Berger, Moritz

2016-09-01

A novel method for the identification of differential item functioning (DIF) by means of recursive partitioning techniques is proposed. We assume an extension of the Rasch model that allows for DIF being induced by an arbitrary number of covariates for each item. Recursive partitioning on the item level results in one tree for each item and leads to simultaneous selection of items and variables that induce DIF. For each item, it is possible to detect groups of subjects with different item difficulties, defined by combinations of characteristics that are not pre-specified. The way a DIF item is determined by covariates is visualized in a small tree and therefore easily accessible. An algorithm is proposed that is based on permutation tests. Various simulation studies, including the comparison with traditional approaches to identify items with DIF, show the applicability and the competitive performance of the method. Two applications illustrate the usefulness and the advantages of the new method.

The safety of risk or the risk of safety?

NARCIS (Netherlands)

Suddle, S.I.; Waarts, P.H.

2003-01-01

Safety is nowadays one of the main items on the agenda during the planning, realisation and management of most large-scale projects, particularly in infrastructure and building projects in intensively used areas such as multiple use of land projects. It is vital that safety aspects are properly

NFC based Equipment Qualification Management (NEQM) system preventing counterfeit and fraudulent item

Energy Technology Data Exchange (ETDEWEB)

Chang, C.K., E-mail: ckchang@kings.ac.kr [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of); Lee, K.J., E-mail: klee@khu.ac.kr [Kyung Hee Univ., Seoul (Korea, Republic of)

2014-07-01

Qualification of equipment essential to safety in nuclear power plants (NPPs) ensures its capability to perform designated safety functions on demand under postulated service conditions. However, a number of incidents identified by the NRC since 1980s catalysed the US nuclear industry to adopt standard precautions to guard against counterfeit items. The purpose of this paper is to suggest the NFC (Near Field Communication) based equipment qualification management system preventing counterfeit and fraudulent items. The NEQM (NFC based Equipment Qualification Management) system work with the support of legacy systems such as PMS (Procurement Management System) and FMS (Facility management System). (author)

NFC based Equipment Qualification Management (NEQM) system preventing counterfeit and fraudulent item

International Nuclear Information System (INIS)

Chang, C.K.; Lee, K.J.

2014-01-01

Qualification of equipment essential to safety in nuclear power plants (NPPs) ensures its capability to perform designated safety functions on demand under postulated service conditions. However, a number of incidents identified by the NRC since 1980s catalysed the US nuclear industry to adopt standard precautions to guard against counterfeit items. The purpose of this paper is to suggest the NFC (Near Field Communication) based equipment qualification management system preventing counterfeit and fraudulent items. The NEQM (NFC based Equipment Qualification Management) system work with the support of legacy systems such as PMS (Procurement Management System) and FMS (Facility management System). (author)

Use of commercial grade item dedication to reduce procurement costs

International Nuclear Information System (INIS)

Rosch, F.

1995-01-01

In the mid-1980s, the Nuclear Regulatory Industry (NRC) began inspecting utility practices of procuring and dedicating commercial grade items intended for plant safety-related applications. As a result of the industry efforts to address NRC concerns, nuclear utilities have enhanced existing programs and procedures for dedication of commercial grade items. Though these programs were originally enhanced to meet NRC concerns, utilities have discovered that the dedication of commercial grade items can also reduce overall procurement costs. This paper will discuss the enhancement of utility dedication programs and demonstrates how utilities have utilized them to reduce procurement costs

Computing replenishment cycle policy parameters for a perishable item

NARCIS (Netherlands)

Rossi, R.; Tarim, S.A.; Hnich, B.; Prestwich, S.

2010-01-01

In many industrial environments there is a significant class of problems for which the perishable nature of the inventory cannot be ignored in developing replenishment order plans. Food is the most salient example of a perishable inventory item. In this work, we consider the periodic-review,

Surveillance of items important to safety in nuclear power plants

International Nuclear Information System (INIS)

1990-01-01

The Guide was prepared as part of the IAEA's programme, referred to as the NUSS Programme, for establishing Codes and Safety Guides relating to nuclear power plants. THe Guide supplements the Code on the Safety of Nuclear Power Plants: Operation, IAEA Safety Series No. 50-C-O(Rev.1). The operating organization has overall responsibility for the safe operation of the nuclear power plant. Therefore, it shall ensure that adequate surveillance activities are carried out in order to verify that the plant is operated within the prescribed operational limits and conditions, and to detect in time any deterioration of structures, systems and components as well as any adverse trend that could lead to an unsafe condition. These activities can be classified as: Monitoring plant parameters and system status; Checking and calibrating instrumentation; Testing and inspecting structures, systems and components. This Safety Guide provides guidance and recommendations on surveillance activities to ensure that structures, systems and components important to safety are available to perform their functions in accordance with design intent and assumptions

The Dif Identification in Constructed Response Items Using Partial Credit Model

Directory of Open Access Journals (Sweden)

Heri Retnawati

2017-10-01

Full Text Available The study was to identify the load, the type and the significance of differential item functioning (DIF in constructed response item using the partial credit model (PCM. The data in the study were the students’ instruments and the students’ responses toward the PISA-like test items that had been completed by 386 ninth grade students and 460 tenth grade students who had been about 15 years old in the Province of Yogyakarta Special Region in Indonesia. The analysis toward the item characteristics through the student categorization based on their class was conducted toward the PCM using CONQUEST software. Furthermore, by applying these items characteristics, the researcher draw the category response function (CRF graphic in order to identify whether the type of DIF content had been in uniform or non-uniform. The significance of DIF was identified by comparing the discrepancy between the difficulty level parameter and the error in the CONQUEST output results. The results of the analysis showed that from 18 items that had been analyzed there were 4 items which had not been identified load DIF, there were 5 items that had been identified containing DIF but not statistically significant and there were 9 items that had been identified containing DIF significantly. The causes of items containing DIF were discussed.

Use of other industry standards to facilitate the procurement and dedication of commercial-grade items

International Nuclear Information System (INIS)

Beard, R.L.; Rosch, F.C.; Sanwarwalla, M.H.; Tjernlund, R.M.

1994-01-01

Nuclear utilities are embarking on innovative approaches for reducing costs in all aspects of engineering, operation, maintenance, and procurement to produce power cheaply and efficiently and remain competitive with other power producers. In the area of procurement, utilities are increasingly obtaining commercial-grade items for use in safety-related applications. This trend is occurring because of lack of suppliers capable or willing to meet 10 CFR 21 and 10 CFR 50 App. B requirements and because of the absence of original equipment suppliers or the spiraling cost associated with procuring items' basic components safety-related from original suppliers. Utilities have been looking at ways to reduce procurement costs. One promising means to reduce costs is to utilize information provided in other nonnuclear industry standards regarding the specification, control, manufacture, and acceptance of the critical characteristics required of the item to perform its design function. A task force was instituted under the sponsorship of the Electric Power Research Institute to investigate the feasibility of using items manufactured to other industry standards in nuclear safety-related applications. This investigation looked at a broad spectrum of available industry standards pertaining to the design, function, manufacture, and testing of items and determined that some standards are more useful than others. This paper discusses the results of this investigation and how credit from the controls exercised for items manufactured to certain existing industry standards can be taken to minimize dedication costs

Item validity vs. item discrimination index: a redundancy?

Science.gov (United States)

Panjaitan, R. L.; Irawati, R.; Sujana, A.; Hanifah, N.; Djuanda, D.

2018-03-01

In several literatures about evaluation and test analysis, it is common to find that there are calculations of item validity as well as item discrimination index (D) with different formula for each. Meanwhile, other resources said that item discrimination index could be obtained by calculating the correlation between the testee’s score in a particular item and the testee’s score on the overall test, which is actually the same concept as item validity. Some research reports, especially undergraduate theses tend to include both item validity and item discrimination index in the instrument analysis. It seems that these concepts might overlap for both reflect the test quality on measuring the examinees’ ability. In this paper, examples of some results of data processing on item validity and item discrimination index were compared. It would be discussed whether item validity and item discrimination index can be represented by one of them only or it should be better to present both calculations for simple test analysis, especially in undergraduate theses where test analyses were included.

Systems analysis determining critical items, critical assembly processes, primary failure modes and corrective actions on ASST magnets

International Nuclear Information System (INIS)

Arden, C.S.

1993-04-01

During the assembly process through the completion of the Accelerator Surface String Test (ASST) phase one test, Magnet Systems Division Reliability Engineering has tracked all the known discrepancies utilizing the Failure Reporting, Analysis and Corrective Action System (FRACAS) and data base. This paper discusses the critical items, critical assembly processes, primary failure modes and corrective actions (lessons learned) based on actual data for the ASST magnets. The ASST magnets include seven Brookhaven Lab Dipoles (DCA-207 through 213), fourteen Fermi Lab Dipoles (DCA-310 through 323) and five Lawrence Berkeley Lab Quadrupoles (QCC-402 through 406). Between all the ASST magnets built there were one hundred eighty six (186) class one discrepancies reported out of approximately eleven hundred total discrepancy reports. The class one or critical discrepancies are defined as form, fit, function, safety or reliability problem. Each and every ASST magnet is considered a success, as they all achieved the quench performance requirements and were capable of being incorporated into the string test. This paper also discuss some specific magnet discrepancies, including failure cause(s), corrective action and possible open issues

Systems analysis determining critical items, critical assembly processes, primary failure modes and corrective actions on ASST magnets

International Nuclear Information System (INIS)

Arden, C.S.

1994-01-01

During the assembly process through the completion of the Accelerator Surface String Test (ASST) phase one test, Magnet Systems Division Reliability Engineering has tracked all the known discrepancies utilizing the Failure Reporting, Analysis and Corrective Action System (FRACAS) and data base. This paper discusses the critical items, critical assembly processes, primary failure modes and corrective actions (lessons learned) based on actual data for the ASST magnets. The ASST magnets include seven Brookhaven Lab Dipoles (DCA-207 through 213), fourteen Fermi Lab Dipoles (DCA-310 through 323) and five Lawrence Berkeley Lab Quadrupoles (QCC-402 through 406). Between all the ASST magnets built there were one hundred eighty six (186) class one discrepancies reported out of approximately eleven hundred total discrepancy reports. The class one or critical discrepancies are defined as form, fit, function, safety or reliability problem. Each and every ASST magnet is considered a success, as they all achieved the quench performance requirements and were capable of being incorporated into the string test. This paper will also discuss some specific magnet discrepancies, including failure cause(s), corrective action and possible open issues

Knowledge and practices about hospital waste disposal and universal safety precautions in class IV employee.

Science.gov (United States)

Megha, Khobragade; Daksha, Pandit

2013-01-01

Norms and guidelines are formed for safe disposal of hospital waste but question is whether these guidelines are being followed and if so, to what extent. Hence, this study was conducted with objective to study the knowledge and practices about hospital waste disposal and universal safety precautions in class IV employee and to study its relationship with education, occupation and training. A cross-sectional study was carried out in a teaching hospital in Mumbai using semi-structured questionnaire in which Class IV employee were included. Questionnaire was filled by face to face interview. Data were analyzed using SPSS. 48.7% Class IV employee were not trained. More than 40% were following correct practices about disinfection of infectious waste. None of the respondents were using protective footwear while handling hospital waste. Only 25.5% were vaccinated for hepatitis B. 16% had done HIV testing due to contact with blood, body fluid, needle stick injury. Knowledge and practices about hospital waste disposal and universal precaution were statistically significant in trained respondents. Training of employees should be given top priority; those already in service should be given on the job training at the earliest.

Loosely coupled class families

DEFF Research Database (Denmark)

Ernst, Erik

2001-01-01

are expressed using virtual classes seem to be very tightly coupled internally. While clients have achieved the freedom to dynamically use one or the other family, it seems that any given family contains a xed set of classes and we will need to create an entire family of its own just in order to replace one...... of the members with another class. This paper shows how to express class families in such a manner that the classes in these families can be used in many dierent combinations, still enabling family polymorphism and ensuring type safety....

Characteristics of the safety climate in teams with world-class safety ...

African Journals Online (AJOL)

interact to deliver a project successfully in terms of cost .... small-scale accidents occurring at high frequency and from diverse ... the team dynamics of role players in a construction project and .... modified safety pyramid to measure the impact of the safety climate ...... Methodological Centre for Vocational Education and.

Building a World-Class Safety Culture: The National Ignition Facility and the Control of Human and Organizational Error

International Nuclear Information System (INIS)

Bennett, C T; Stalnaker, G

2002-01-01

Accidents in complex systems send us signals. They may be harbingers of a catastrophe. Some even argue that a ''normal'' consequence of operations in a complex organization may not only be the goods it produces, but also accidents and--inevitably--catastrophes. We would like to tell you the story of a large, complex organization, whose history questions the argument ''that accidents just happen.'' Starting from a less than enviable safety record, the National Ignition Facility (NIF) has accumulated over 2.5 million safe hours. The story of NIF is still unfolding. The facility is still being constructed and commissioned. But the steps NIF has taken in achieving its safety record provide a principled blueprint that may be of value to others. Describing that principled blueprint is the purpose of this paper. The first part of this paper is a case study of NIF and its effort to achieve a world-class safety record. This case study will include a description of (1) NIF's complex systems, (2) NIF's early safety history, (3) factors that may have initiated its safety culture change, and (4) the evolution of its safety blueprint. In the last part of the paper, we will compare NIF's safety culture to what safety industry experts, psychologists, and sociologists say about how to shape a culture and control organizational error

Evaluation of temporary non-code repairs in safety class 3 piping systems

International Nuclear Information System (INIS)

Godha, P.C.; Kupinski, M.; Azevedo, N.F.

1996-01-01

Temporary non-ASME Code repairs in safety class 3 pipe and piping components are permissible during plant operation in accordance with Nuclear Regulatory Commission Generic Letter 90-05. However, regulatory acceptance of such repairs requires the licensee to undertake several timely actions. Consistent with the requirements of GL 90-05, this paper presents an overview of the detailed evaluation and relief request process. The technical criteria encompasses both ductile and brittle piping materials. It also lists appropriate evaluation methods that a utility engineer can select to perform a structural integrity assessment for design basis loading conditions to support the use of temporary non-Code repair for degraded piping components. Most use of temporary non-code repairs at a nuclear generating station is in the service water system which is an essential safety related system providing the ultimate heat sink for various plant systems. Depending on the plant siting, the service water system may use fresh water or salt water as the cooling medium. Various degradation mechanisms including general corrosion, erosion/corrosion, pitting, microbiological corrosion, galvanic corrosion, under-deposit corrosion or a combination thereof continually challenge the pressure boundary structural integrity. A good source for description of corrosion degradation in cooling water systems is provided in a cited reference

SERENITY in e-Business and Smart Item Scenarios

Science.gov (United States)

Benameur, Azzedine; Khoury, Paul El; Seguran, Magali; Sinha, Smriti Kumar

SERENITY Artefacts, like Class, Patterns, Implementations and Executable Components for Security & Dependability (S&D) in addition to Serenity Runtime Framework (SRF) are discussed in previous chapters. How to integrate these artefacts with applications in Serenity approach is discussed here with two scenarios. The e-Business scenario is a standard loan origination process in a bank. The Smart Item scenario is an Ambient intelligence case study where we take advantage of Smart Items to provide an electronic healthcare infrastructure for remote healthcare assistance. In both cases, we detail how the prototype implementations of the scenarios select proper executable components through Serenity Runtime Framework and then demonstrate how these executable components of the S&D Patterns are deployed.

Teaching Physical Geography with Toys, Household Items, and Food

Science.gov (United States)

Carnahan, Laura; Pankratz, Mary Jo; Alberts, Heike

2014-01-01

While many college physical geography instructors already use a wide variety of creative teaching approaches in their classes, others have not yet been exposed to teaching with toys, household items, or food. The goal in this article is to present some ideas for teaching college-level physical geography (weather/climate and geomorphology) for…

Procurement Engineering Process for Commercial Grade Item Dedication

International Nuclear Information System (INIS)

Park, Jong-Hyuck; Park, Jong-Eun; Kwak, Tack-Hun; Yoo, Keun-Bae; Lee, Sang-Guk; Hong, Sung-Yull

2006-01-01

Procurement Engineering Process for commercial grade item dedication plays an increasingly important role in operation management of Korea Nuclear Power Plants. The purpose of the Procurement Engineering Process is the provision and assurance of a high quality and quantity of spare, replacement, retrofit and new parts and equipment while maximizing plant availability, minimizing downtime due to parts unavailability and providing reasonable overall program and inventory cost. In this paper, we will review the overview requirements, responsibilities and the process for demonstrating with reasonable assurance that a procured item for potential nuclear safety related services or other essential plant service is adequate with reasonable assurance for its application. This paper does not cover the details of technical evaluation, selecting critical characteristics, selecting acceptance methods, performing failure modes and effects analysis, performing source surveillance, performing quality surveys, performing special tests and inspections, and the other aspects of effective Procurement Engineering and Commercial Grade Item Dedication. The main contribution of this paper is to provide the provision of an overview of Procurement Engineering Process for commercial grade item

Dimensions of Safety Climate among Iranian Nurses.

Science.gov (United States)

Konjin, Z Naghavi; Shokoohi, Y; Zarei, F; Rahimzadeh, M; Sarsangi, V

2015-10-01

Workplace safety has been a concern of workers and managers for decades. Measuring safety climate is crucial in improving safety performance. It is also a method of benchmarking safety perception. To develop and validate a psychometrics scale for measuring nurses' safety climate. Literature review, subject matter experts and nurse's judgment were used in items developing. Content validity and reliability for new tool were tested by content validity index (CVI) and test-retest analysis, respectively. Exploratory factor analysis (EFA) with varimax rotation was used to improve the interpretation of latent factors. A 40-item scale in 6 factors was developed, which could explain 55% of the observed variance. The 6 factors included employees' involvement in safety and management support, compliance with safety rules, safety training and accessibility to personal protective equipment, hindrance to safe work, safety communication and job pressure, and individual risk perception. The proposed scale can be used in identifying the needed areas to implement interventions in safety climate of nurses.

Progress report concerning safety research for nuclear reactor facilities

International Nuclear Information System (INIS)

1978-01-01

Examination and evaluation of safety research results for nuclear reactor facilities have been performed, as more than a year has elapsed since the plan had been initiated in April, 1976, by the special sub-committee for the safety of nuclear reactor facilities. The research is carried out by being divided roughly into 7 items, and seems to be steadily proceeding, though it does not yet reach the target. The above 7 items include researches for (1) criticality accident, (2) loss of coolant accident, (3) safety for light water reactor fuel, (4) construction safety for reactor facilities, (5) reduction of release of radioactive material, (6) safety evaluation based on the probability theory for reactor facilities, and (7) aseismatic measures for reactor facilities. With discussions on the progress and the results of the research this time, research on the behaviour on fuel in abnormal transients including in-core and out-core experiments has been added to the third item, deleting the power-cooling mismatch experiment in Nuclear Safety Research Reactor of JAERI. Also it has been decided to add two research to the seventh item, namely measured data collection, classification and analysis, and probability assessment of failures due to an earthquake. For these 7 items, the report describes the concrete contents of research to be performed in fiscal years of 1977 and 1978, by discussing on most rational and suitable contents conceivable at present. (Wakatsuki, Y.)

Verification of BGA type FPGA logic applied to a control equipment with Safety Class using the special socket

International Nuclear Information System (INIS)

Chung, YounHu; Yoo, Kwanwoo; Lee, Myeongkyun; Yun, Donghwa

2015-01-01

This article aims to provide the verification method for BGA-type FPGA of Programmable Logic Controller (PLC) developed as Safety Class. The logic of FPGA in the control device with Safety Class is the circuit to control overall logic of PLC. This device converts to the different module from the input signals for both digital and analogue of the equipment in the field and outputs their data. In addition, it should perform the logical controls such as backplane communication control and data communication. We suggest acquiring method of the data signal with efficient logic using the socket in this article. Proposed test socket is made by simpler process than former one, and the process is done in batches by which cost can be reduces, and the test socket can be quickly produced in response to any request. Also, it is possible to reduce the wear by reducing the contact force of the ball phenomenon. The structure on the basis of silicon can be reduced the modification, and it has excellent linearity. At the logic verification, the operation that state data block is designed in the FPGA could be easily confirmed by using a socket

Safety Assessment in Installation of Precast Concrete

Directory of Open Access Journals (Sweden)

Yashrri S.N.

2014-03-01

Full Text Available This study was carried out to identify the safety aspects and the level of safety during the installation process in construction sites. A questionnaire survey and interviews were done to provide data on safety requirements in precast concrete construction. All of the interviews and the research questionnaire survey were conducted among contractors that are registered as class 1 to class 7 with the Construction Industry Development Board (CIDB and class A to class G with Pusat Khidmat Kontraktor (PKK in Penang. Returned questionnaires were analysed with the use of simple percentages and the Likert Scale analysis method to identify safety aspects of precast construction. The results indicate that the safety aspect implemented by companies involved in the precast construction process is at a good level in the safety aspect during bracing, propping, welding and grouting processes and at a very good level of safety in general aspects and safety aspects during lifting processes.

Development of a Novel Nuclear Safety Culture Evaluation Method for an Operating Team Using Probabilistic Safety Analysis

Energy Technology Data Exchange (ETDEWEB)

Han, Sangmin; Lee, Seung Min; Seong, Poong Hyun [KAIST, Daejeon (Korea, Republic of)

2015-05-15

IAEA defined safety culture as follows: 'Safety Culture is that assembly of characteristics and attitudes in organizations and individuals which establishes that, as an overriding priority, nuclear plant safety issues receive the attention warranted by their significance'. Also, celebrated behavioral scientist, Cooper, defined safety culture as,'safety culture is that observable degree of effort by which all organizational members direct their attention and actions toward improving safety on a daily basis' with his internal psychological, situational, and behavioral context model. With these various definitions and criteria of safety culture, several safety culture assessment methods have been developed to improve and manage safety culture. To develop a new quantitative safety culture evaluation method for an operating team, we unified and redefined safety culture assessment items. Then we modeled a new safety culture evaluation by adopting level 1 PSA concept. Finally, we suggested the criteria to obtain nominal success probabilities of assessment items by using 'operational definition'. To validate the suggested evaluation method, we analyzed the collected audio-visual recording data collected from a full scope main control room simulator of a NPP in Korea.

Development of a Novel Nuclear Safety Culture Evaluation Method for an Operating Team Using Probabilistic Safety Analysis

International Nuclear Information System (INIS)

Han, Sangmin; Lee, Seung Min; Seong, Poong Hyun

2015-01-01

IAEA defined safety culture as follows: 'Safety Culture is that assembly of characteristics and attitudes in organizations and individuals which establishes that, as an overriding priority, nuclear plant safety issues receive the attention warranted by their significance'. Also, celebrated behavioral scientist, Cooper, defined safety culture as,'safety culture is that observable degree of effort by which all organizational members direct their attention and actions toward improving safety on a daily basis' with his internal psychological, situational, and behavioral context model. With these various definitions and criteria of safety culture, several safety culture assessment methods have been developed to improve and manage safety culture. To develop a new quantitative safety culture evaluation method for an operating team, we unified and redefined safety culture assessment items. Then we modeled a new safety culture evaluation by adopting level 1 PSA concept. Finally, we suggested the criteria to obtain nominal success probabilities of assessment items by using 'operational definition'. To validate the suggested evaluation method, we analyzed the collected audio-visual recording data collected from a full scope main control room simulator of a NPP in Korea

Using automatic item generation to create multiple-choice test items.

Science.gov (United States)

Gierl, Mark J; Lai, Hollis; Turner, Simon R

2012-08-01

Many tests of medical knowledge, from the undergraduate level to the level of certification and licensure, contain multiple-choice items. Although these are efficient in measuring examinees' knowledge and skills across diverse content areas, multiple-choice items are time-consuming and expensive to create. Changes in student assessment brought about by new forms of computer-based testing have created the demand for large numbers of multiple-choice items. Our current approaches to item development cannot meet this demand. We present a methodology for developing multiple-choice items based on automatic item generation (AIG) concepts and procedures. We describe a three-stage approach to AIG and we illustrate this approach by generating multiple-choice items for a medical licensure test in the content area of surgery. To generate multiple-choice items, our method requires a three-stage process. Firstly, a cognitive model is created by content specialists. Secondly, item models are developed using the content from the cognitive model. Thirdly, items are generated from the item models using computer software. Using this methodology, we generated 1248 multiple-choice items from one item model. Automatic item generation is a process that involves using models to generate items using computer technology. With our method, content specialists identify and structure the content for the test items, and computer technology systematically combines the content to generate new test items. By combining these outcomes, items can be generated automatically. © Blackwell Publishing Ltd 2012.

Deliberate ambiguity in a finite environment: The urban ecology of artificial items

Directory of Open Access Journals (Sweden)

Abraham Akkerman

2000-01-01

Full Text Available A distinction is made between visual declaration and virtual usage of artificial items within a physical environment, such as a street. Visual declaration is a formal pictorial designation, or a function, e.g. “decoration,” of an item, such as a “planter.” Virtual usage refers to the item when it is used in lieu of another item. The formal designation, “sitting,” customarily designated to an item such as “bench,” could also be a virtual usage of the item “planter.” The question asked is, “What is the relationship between items, given their formal, visual declaration and their informal, virtual, usage?” An artificial item, according to its visual declaration, is referred to as a ‘visual’ or ‘real item’. Each visual item has the property of being used as another item by virtue of its undeclared usage. Pending on the item's design and configuration, a visual item can be then substituted for another visual item. An artificial item, thus, attains deliberate ambiguity between its formal designation and its virtual usage. This ambiguity between visual declaration and virtual usage can be quantified. Within the full domain of n possible usages, this relationship can be conveniently presented in a nonnegative matrix. It is shown that the inverse of this matrix belongs to a class of well-known matrices. This being the case, the relationship between visual and virtual properties of items within the environment can be formalized. The formalization throws further light on the emerging opportunities in streetscape design.

Comparing safety climate in naval aviation and hospitals: implications for improving patient safety.

Science.gov (United States)

Singer, Sara J; Rosen, Amy; Zhao, Shibei; Ciavarelli, Anthony P; Gaba, David M

2010-01-01

Evidence of variation in safety climate suggests the need for improvement among at least some hospitals. However, comparisons only among hospitals may underestimate the improvement required. Comparison of hospitals with analogous industries may provide a broader perspective on the safety status of our nation's hospitals. The purpose of this study was to compare safety climate among hospital workers with personnel from naval aviation, an organization that operates with high reliability despite intrinsically hazardous conditions. We surveyed a random sample of health care workers in 67 U.S. hospitals and, for generalizability, 30 veterans affairs hospitals using questions comparable with those posed at approximately the same time (2007) to a census of personnel from 35 squadrons of U.S. naval aviators. We received 13,841 (41%) completed surveys in U.S. hospitals, 5,511 (50%) in veterans affairs hospitals, and 14,854 (82%) among naval aviators. We examined differences in respondents' perceptions of safety climate at their institution overall and for 16 individual items. Safety climate was three times better on average among naval aviators than among hospital personnel. Naval aviators perceived a safer climate (up to seven times safer) than hospital personnel with respect to each of the 16 survey items. Compared with hospital managers, naval commanders perceived climate more like frontline personnel did. When contrasting naval aviators with hospital personnel working in comparably hazardous areas, safety climate discrepancies increased rather than decreased. One individual hospital performed as well as naval aviation on average, and at least one hospital outperformed the Navy benchmark for all but three individual survey items. Results suggest that hospitals have not sufficiently created a uniform priority of safety. However, if each hospital performed as well as the top-performing hospital in each area measured, hospitals could achieve safety climate levels comparable

A Model Proposal and Implementation Concerning Occupational Health and Safety within the Framework of World Class Manufacturing

OpenAIRE

GÜMÜŞOĞLU, Şevkinaz; TEPEKULE, Esin Tuba

2017-01-01

The approach, which aims atbecoming the best in every application and operation realizing every strategythat it has at a perfect level, has been referred to as World ClassManufacturing (WCM).  The synergic effectof WCM inherent in application and strategies will be helpful in takingbusinesses’ strength to the desired level in the current competitiveenvironment. For businesses in applications of Occupational Health and Safety(OHS) to perform at the top level will contribute to become the best,...

Configuration control during maintenance of safety related equipment

International Nuclear Information System (INIS)

Irish, C.S.

2001-01-01

Possibly the most important aspect of performing maintenance of safety related equipment is maintaining the component's original design basis. Assuring that the repaired item will perform the same safety function within the original performance and equipment qualification parameters is commonly referred to as configuration control. Maintaining configuration control of a technologically current well documented item is easy. Unfortunately, this does not describe most safety related items requiring maintenance within the global nuclear industry. Items such as motors, transformers, metal clad switchgear (low and medium voltage circuit breakers), refrigeration compressors, and electronic components (i.e. circuit boards, power supplies, regulators, etc.) which routinely require repair have been in service for twenty plus years. As a result, finding replacement parts and or material to repair the items to the original condition is becoming more and more difficult. An added difficulty is the lack of original technical documentation available on the item which is being repaired. The lack of technical documentation makes it difficult to identify replacement material and parts when the original part or material is not available. The lack of documentation also makes it difficult to test the repaired item to make sure that the original configuration has been maintained after the repair. The presentation will discuss the details of repairing various items including motors, metal clad switchgear, refrigeration compressors and power supplies and the controls which are necessary to maintain the configuration of the original item. The discussion will include the Quality Assurance and engineering necessary to identify and evaluate replacement material and parts necessary to perform repairs on safety related equipment when the original material or part is not available. Examples of repairs which required different parts or materials than the original to be used in the repair will be

Configuration control during maintenance of safety related equipment

International Nuclear Information System (INIS)

Irish, C.S.

2003-01-01

Possibly the most important aspect of performing maintenance of safety related equipment is maintaining the component's original design basis. Assuring that the repaired item will perform the same safety function within the original performance and equipment qualification parameters is commonly referred to as configuration control. Maintaining configuration control of a technologically current well documented item is easy. Unfortunately, this does not describe most safety related items requiring maintenance within the global nuclear industry. Items such as motors, transformers, metal clad switchgear (low and medium voltage circuit breakers), refrigeration compressors, and electronic components (i.e. circuit boards, power supplies, regulators, etc.) which routinely require repair have been in service for twenty plus years. As a result, finding replacement parts and or material to repair the items to the original condition is becoming more and more difficult. An added difficulty is the lack of original technical documentation available on the item which is being repaired. The lack of technical documentation makes it difficult to identify replacement material and parts when the original part or material is not available. The lack of documentation also makes it difficult to test the repaired item to make sure that the original configuration has been maintained after the repair. The presentation will discuss the details of repairing various items including motors, metal clad switchgear, refrigeration compressors and power supplies and the controls which are necessary to maintain the configuration of the original item. The discussion will include the Quality Assurance and engineering necessary to identify and evaluate replacement material and parts necessary to perform repairs on safety related equipment when the original material or part is not available. Examples of repairs which required different parts or materials than the original to be used in the repair will be

Bugetul funcțional (Line - Item Budget) și metoda Buget Bază Zero ( Zero Base Budgeting - ZBB)

OpenAIRE

Dan Tudor LAZĂR; Adrian Mihai INCEU

2004-01-01

A line-item budget lists, in vertical columns, each of the revenue sources and each of the types – or classes – of items will purchase during the fiscal year. The line-item budget, which is the most widely used of all budgeting systems, offers many advantages. It is comparatively easy to prepare and doesn’t require sophisticated financial skills. Also, the line-item budget is straightforward, simple to administer and readily understood by everybody. Moreover, the simplicity of the system make...

Problems of safety and risk in physical education

Directory of Open Access Journals (Sweden)

Robert Podstawski

2015-10-01

Full Text Available Purpose: One of the methodology issues in Physical Education is providing children with safety. The purpose of this work is to present basic concepts of safety at Physical Education classes. Material & Methods: The issues connected with safety at classes of Physical Education have been discussed in the subsections, each of which focuses on different concepts such as: legal safety regulations, causes of hazards, theoretical models of preventing hazards at P.E. classes, nutrition programs related to exercise’s fulfillment, prevention of heat disorders and dehydration. Results: According to experts’ opinion, the causes of safety hazards at P.E. classes can be divided into three groups: caused by instructor, caused by a student, and finally hazards technical in nature. The number of accidents during P.E. classes is still substantial, and among most common hazards there are the following: fractures of upper and lower limbs, dislocations, contusions, tendonitis, muscle tear and cuts. Curiously, boys experience such injuries more frequently than girls. Conclusions: Even though safety rules at Physical Education classes are defined by specific regulations, children’s absolute safety is never guaranteed. In order to diminish the number of misadventures, instructor is obliged not only to adhere to the norms but also to teach children to safety rules.

Dimensions of Safety Climate among Iranian Nurses

Directory of Open Access Journals (Sweden)

Z Naghavi Konjin

2015-10-01

Full Text Available Background: Workplace safety has been a concern of workers and managers for decades. Measuring safety climate is crucial in improving safety performance. It is also a method of benchmarking safety perception. Objective: To develop and validate a psychometrics scale for measuring nurses' safety climate. Methods: Literature review, subject matter experts and nurse's judgment were used in items developing. Content validity and reliability for new tool were tested by content validity index (CVI and test-retest analysis, respectively. Exploratory factor analysis (EFA with varimax rotation was used to improve the interpretation of latent factors. Results: A 40-item scale in 6 factors was developed, which could explain 55% of the observed variance. The 6 factors included employees' involvement in safety and management support, compliance with safety rules, safety training and accessibility to personal protective equipment, hindrance to safe work, safety communication and job pressure, and individual risk perception. Conclusion: The proposed scale can be used in identifying the needed areas to implement interventions in safety climate of nurses.

Relationships amongst psychological determinants, risk behaviour, and road crashes of young adolescent pedestrians and cyclists : implications for road safety education programmes.

OpenAIRE

Twisk, D.A.M. Commandeur, J.J.F. Vlakveld, W.P. Shope, J.T. & Kok, G.

2015-01-01

Road safety education (RSE) assumes that psychological determinants predict risk behaviour, and subsequently that risky road behaviour predicts crash involvement. This study examined the validity of this assumption, by analysing these relationships in two age groups of teen cyclists and pedestrians: a younger age group (12 and 13 years old: n = 1372) and an older age group (14–16 years old: n = 938). A questionnaire was administered at school during regular class consisting of items on demogr...

Practice of radiation dose control for tech-modification items in Qinshan Nuclear Power Plant

International Nuclear Information System (INIS)

Zhang Yong; Chen Zhongyu; Xu Hongming; Fan Liguang; Jiang Jianqi; Bu Weidong

2006-01-01

In order to improve the safety and reliability of nuclear power plant operation, many tech-modifications related to system or equipment have been completed since operation in Qinshan NPP. this paper introduces radiation dose control for mainly tech-modifications items related to radiation, including radiation protection optimization measures and experience in aspects of item planning, program writing, process control, etc. (authors)

Workplace safety and health programs, practices, and conditions in auto collision repair businesses.

Science.gov (United States)

Brosseau, L M; Bejan, A; Parker, D L; Skan, M; Xi, M

2014-01-01

This article describes the results of a pre-intervention safety assessment conducted in 49 auto collision repair businesses and owners' commitments to specific improvements. A 92-item standardized audit tool employed interviews, record reviews, and observations to assess safety and health programs, training, and workplace conditions. Owners were asked to improve at least one-third of incorrect, deficient, or missing (not in compliance with regulations or not meeting best practice) items, of which a majority were critical or highly important for ensuring workplace safety. Two-thirds of all items were present, with the highest fraction related to electrical safety, machine safety, and lockout/tagout. One-half of shops did not have written safety programs and had not conducted recent training. Many had deficiencies in respiratory protection programs and practices. Thirteen businesses with a current or past relationship with a safety consultant had a significantly higher fraction of correct items, in particular related to safety programs, up-to-date training, paint booth and mixing room conditions, electrical safety, and respiratory protection. Owners selected an average of 58% of recommended improvements; they were most likely to select items related to employee Right-to-Know training, emergency exits, fire extinguishers, and respiratory protection. They were least likely to say they would improve written safety programs, stop routine spraying outside the booth, or provide adequate fire protection for spray areas outside the booth. These baseline results suggest that it may be possible to bring about workplace improvements using targeted assistance from occupational health and safety professionals.

The Role of Item Models in Automatic Item Generation

Science.gov (United States)

Gierl, Mark J.; Lai, Hollis

2012-01-01

Automatic item generation represents a relatively new but rapidly evolving research area where cognitive and psychometric theories are used to produce tests that include items generated using computer technology. Automatic item generation requires two steps. First, test development specialists create item models, which are comparable to templates…

Job Satisfaction among Health-Care Staff in Township Health Centers in Rural China: Results from a Latent Class Analysis.

Science.gov (United States)

Wang, Haipeng; Tang, Chengxiang; Zhao, Shichao; Meng, Qingyue; Liu, Xiaoyun

2017-09-22

Background : The lower job satisfaction of health-care staff will lead to more brain drain, worse work performance, and poorer health-care outcomes. The aim of this study was to identify patterns of job satisfaction among health-care staff in rural China, and to investigate the association between the latent clusters and health-care staff's personal and professional features; Methods : We selected 12 items of five-point Likert scale questions to measure job satisfaction. A latent-class analysis was performed to identify subgroups based on the items of job satisfaction; Results : Four latent classes of job satisfaction were identified: 8.9% had high job satisfaction, belonging to "satisfied class"; 38.2% had low job satisfaction, named as "unsatisfied class"; 30.5% were categorized into "unsatisfied class with the exception of interpersonal relationships"; 22.4% were identified as "pseudo-satisfied class", only satisfied with management-oriented items. Low job satisfaction was associated with specialty, training opportunity, and income inequality. Conclusions : The minority of health-care staff belong to the "satisfied class". Three among four subgroups are not satisfied with income, benefit, training, and career development. Targeting policy interventions should be implemented to improve the items of job satisfaction based on the patterns and health-care staff's features.

Learning Wellness: A Water Exercise Class in Zagreb, Croatia

Science.gov (United States)

Roberson, Donald N., Jr.

2007-01-01

The research reported in this article investigated the dynamics of a water exercise class with older adults in Zagreb, Croatia. It focused on 3 classes of older swimmers at a community exercise center. A total of 105 participants were asked to complete a short questionnaire. The questionnaire contained items on demographics, use of free time, and…

Assessing item fit for unidimensional item response theory models using residuals from estimated item response functions.

Science.gov (United States)

Haberman, Shelby J; Sinharay, Sandip; Chon, Kyong Hee

2013-07-01

Residual analysis (e.g. Hambleton & Swaminathan, Item response theory: principles and applications, Kluwer Academic, Boston, 1985; Hambleton, Swaminathan, & Rogers, Fundamentals of item response theory, Sage, Newbury Park, 1991) is a popular method to assess fit of item response theory (IRT) models. We suggest a form of residual analysis that may be applied to assess item fit for unidimensional IRT models. The residual analysis consists of a comparison of the maximum-likelihood estimate of the item characteristic curve with an alternative ratio estimate of the item characteristic curve. The large sample distribution of the residual is proved to be standardized normal when the IRT model fits the data. We compare the performance of our suggested residual to the standardized residual of Hambleton et al. (Fundamentals of item response theory, Sage, Newbury Park, 1991) in a detailed simulation study. We then calculate our suggested residuals using data from an operational test. The residuals appear to be useful in assessing the item fit for unidimensional IRT models.

Problems with the factor analysis of items: Solutions based on item response theory and item parcelling

Directory of Open Access Journals (Sweden)

Gideon P. De Bruin

2004-10-01

Full Text Available The factor analysis of items often produces spurious results in the sense that unidimensional scales appear multidimensional. This may be ascribed to failure in meeting the assumptions of linearity and normality on which factor analysis is based. Item response theory is explicitly designed for the modelling of the non-linear relations between ordinal variables and provides a strong alternative to the factor analysis of items. Items may also be combined in parcels that are more likely to satisfy the assumptions of factor analysis than do the items. The use of the Rasch rating scale model and the factor analysis of parcels is illustrated with data obtained with the Locus of Control Inventory. The results of these analyses are compared with the results obtained through the factor analysis of items. It is shown that the Rasch rating scale model and the factoring of parcels produce superior results to the factor analysis of items. Recommendations for the analysis of scales are made. Opsomming Die faktorontleding van items lewer dikwels misleidende resultate op, veral in die opsig dat eendimensionele skale as meerdimensioneel voorkom. Hierdie resultate kan dikwels daaraan toegeskryf word dat daar nie aan die aannames van lineariteit en normaliteit waarop faktorontleding berus, voldoen word nie. Itemresponsteorie, wat eksplisiet vir die modellering van die nie-liniêre verbande tussen ordinale items ontwerp is, bied ’n aantreklike alternatief vir die faktorontleding van items. Items kan ook in pakkies gegroepeer word wat meer waarskynlik aan die aannames van faktorontleding voldoen as individuele items. Die gebruik van die Rasch beoordelingskaalmodel en die faktorontleding van pakkies word aan die hand van data wat met die Lokus van Beheervraelys verkry is, gedemonstreer. Die resultate van hierdie ontledings word vergelyk met die resultate wat deur ‘n faktorontleding van die individuele items verkry is. Die resultate dui daarop dat die Rasch

The status of safety in the public high school chemistry laboratories in Mississippi

Science.gov (United States)

Lacy, Sarah Louise Trotman

Since laboratory-based science courses have become an essential element of any science curriculum and are required by the Mississippi Department of Education for graduation, the chemistry laboratories in the public high schools in Mississippi must be safe. The purpose of this study was to determine: the safety characteristics of a high school chemistry laboratory; the perceived safety characteristics of the chemistry laboratories in public high schools in Mississippi; the basic safety knowledge of chemistry teachers in public high schools in Mississippi, where chemistry teachers in Mississippi gain knowledge about laboratory safety and instruction; if public high school chemistry laboratories in Mississippi adhere to recommended class size, laboratory floor space per student, safety education, safety equipment, and chemical storage; and the relationship between teacher knowledge of chemistry laboratory safety and the safety status of the laboratory in which they teach. The survey instrument was composed of three parts. Part I Teacher Knowledge consisted of 23 questions concerning high school chemistry laboratory safety. Part II Chemistry Laboratory Safety Information consisted of 40 items divided into four areas of interest concerning safety in high school chemistry laboratories. Part III Demographics consisted of 11 questions relating to teacher certification, experience, education, and safety training. The survey was mailed to a designated chemistry teacher in every public high school in Mississippi. The responses to Part I of the survey indicated that the majority of the teachers have a good understanding of knowledge about chemistry laboratory safety but need more instruction on the requirements for a safe high school chemistry laboratory. Less than 50% of the responding teachers thought they had received adequate preparation from their college classes to conduct a safe chemistry laboratory. According to the responses of the teachers, most of their high school

New technologies for item monitoring

Energy Technology Data Exchange (ETDEWEB)

Abbott, J.A. [EG & G Energy Measurements, Albuquerque, NM (United States); Waddoups, I.G. [Sandia National Labs., Albuquerque, NM (United States)

1993-12-01

This report responds to the Department of Energy`s request that Sandia National Laboratories compare existing technologies against several advanced technologies as they apply to DOE needs to monitor the movement of material, weapons, or personnel for safety and security programs. The authors describe several material control systems, discuss their technologies, suggest possible applications, discuss assets and limitations, and project costs for each system. The following systems are described: WATCH system (Wireless Alarm Transmission of Container Handling); Tag system (an electrostatic proximity sensor); PANTRAK system (Personnel And Material Tracking); VRIS (Vault Remote Inventory System); VSIS (Vault Safety and Inventory System); AIMS (Authenticated Item Monitoring System); EIVS (Experimental Inventory Verification System); Metrox system (canister monitoring system); TCATS (Target Cueing And Tracking System); LGVSS (Light Grid Vault Surveillance System); CSS (Container Safeguards System); SAMMS (Security Alarm and Material Monitoring System); FOIDS (Fiber Optic Intelligence & Detection System); GRADS (Graded Radiation Detection System); and PINPAL (Physical Inventory Pallet).

New technologies for item monitoring

International Nuclear Information System (INIS)

Abbott, J.A.; Waddoups, I.G.

1993-12-01

This report responds to the Department of Energy's request that Sandia National Laboratories compare existing technologies against several advanced technologies as they apply to DOE needs to monitor the movement of material, weapons, or personnel for safety and security programs. The authors describe several material control systems, discuss their technologies, suggest possible applications, discuss assets and limitations, and project costs for each system. The following systems are described: WATCH system (Wireless Alarm Transmission of Container Handling); Tag system (an electrostatic proximity sensor); PANTRAK system (Personnel And Material Tracking); VRIS (Vault Remote Inventory System); VSIS (Vault Safety and Inventory System); AIMS (Authenticated Item Monitoring System); EIVS (Experimental Inventory Verification System); Metrox system (canister monitoring system); TCATS (Target Cueing And Tracking System); LGVSS (Light Grid Vault Surveillance System); CSS (Container Safeguards System); SAMMS (Security Alarm and Material Monitoring System); FOIDS (Fiber Optic Intelligence ampersand Detection System); GRADS (Graded Radiation Detection System); and PINPAL (Physical Inventory Pallet)

Managing nuclear safety at Point Lepreau

Energy Technology Data Exchange (ETDEWEB)

Paciga, J [New Brunswick Power, Point Lepreau NGS, PQ (Canada)

1997-12-01

Managing nuclear safety at Point Lepreau nuclear power plant is described, including technical issues (station aging, definition of the safe operating envelope, design configuration management, code validation, safety analysis and engineering standards); regulatory issues (action items, probabilistic safety assessment, event investigation, periodic safety review, prioritization of regulatory issues, cost benefit assessment); human performance issues (goals and measures, expectations and accountability, supervisory training, safety culture, configuration management, quality of operations and maintenance).

Managing nuclear safety at Point Lepreau

International Nuclear Information System (INIS)

Paciga, J.

1997-01-01

Managing nuclear safety at Point Lepreau nuclear power plant is described, including technical issues (station aging, definition of the safe operating envelope, design configuration management, code validation, safety analysis and engineering standards); regulatory issues (action items, probabilistic safety assessment, event investigation, periodic safety review, prioritization of regulatory issues, cost benefit assessment); human performance issues (goals and measures, expectations and accountability, supervisory training, safety culture, configuration management, quality of operations and maintenance)

Item information and discrimination functions for trinary PCM items

NARCIS (Netherlands)

Akkermans, Wies; Muraki, Eiji

1997-01-01

For trinary partial credit items the shape of the item information and the item discrimination function is examined in relation to the item parameters. In particular, it is shown that these functions are unimodal if δ2 – δ1 < 4 ln 2 and bimodal otherwise. The locations and values of the maxima are

Role of seismic PRA in seismic safety decisions of nuclear power plants

International Nuclear Information System (INIS)

Ravindra, M.K.; Kennedy, R.P.; Sues, R.H.

1985-01-01

This paper highlights the important roles that seismic probabilistic risk assessments (PRAs) can play in the seismic safety decisions of nuclear power plants. If a seismic PRA has been performed for a plant, its results can be utilized to evaluate the seismic capability beyond the safe shutdown event (SSE). Seismic fragilities of key structures and equipment, fragilities of dominant plant damage states and the frequencies of occurrence of these plant damage states are reviewed to establish the seismic safety of the plant beyond the SSE level. Guidelines for seismic margin reviews and upgrading may be developed by first identifying the generic classes of structures and equipment that have been shown to be dominant risk contributors in the completed seismic PRAs, studying the underlying causes for their contribution and examining why certain other items (e.g., piping) have not proved to be high-risk-contributors

Reusable libraries for safety-critical Java

DEFF Research Database (Denmark)

Rios Rivas, Juan Ricardo; Schoeberl, Martin

2014-01-01

The large collection of Java class libraries is a main factor of the success of Java. However, these libraries assume that a garbage-collected heap is used. Safety-critical Java uses scope-based memory areas instead of a garbage-collected heap. Therefore, the Java class libraries are problematic...... to use in safety-critical Java. We have identified common programming patterns in the Java class libraries that make them unsuitable for safety-critical Java. We propose ways to improve the libraries to avoid the impact of the identified problematic patterns. We illustrate these changes by implementing...

Item level diagnostics and model - data fit in item response theory ...

African Journals Online (AJOL)

Item response theory (IRT) is a framework for modeling and analyzing item response data. Item-level modeling gives IRT advantages over classical test theory. The fit of an item score pattern to an item response theory (IRT) models is a necessary condition that must be assessed for further use of item and models that best fit ...

Prerequisites of ideal safety-critical organizations

International Nuclear Information System (INIS)

Takeuchi, Michiru; Hikono, Masaru; Matsui, Yuko; Goto, Manabu; Sakuda, Hiroshi

2013-01-01

This study explores the prerequisites of ideal safety-critical organizations, marshalling arguments of 4 areas of organizational research on safety, each of which has overlap: a safety culture, high reliability organizations (HROs), organizational resilience, and leadership especially in safety-critical organizations. The approach taken in this study was to retrieve questionnaire items or items on checklists of the 4 research areas and use them as materials of abduction (as referred to in the KJ method). The results showed that the prerequisites of ideal safety-oriented organizations consist of 9 factors as follows: (1) The organization provides resources and infrastructure to ensure safety. (2) The organization has a sharable vision. (3) Management attaches importance to safety. (4) Employees openly communicate issues and share wide-ranging information with each other. (5) Adjustments and improvements are made as the organization's situation changes. (6) Learning activities from mistakes and failures are performed. (7) Management creates a positive work environment and promotes good relations in the workplace. (8) Workers have good relations in the workplace. (9) Employees have all the necessary requirements to undertake their own functions, and act conservatively. (author)

Development of the Consumer Refrigerator Safety Questionnaire: A Measure of Consumer Perceptions and Practices.

Science.gov (United States)

Cairnduff, Victoria; Dean, Moira; Koidis, Anastasios

2016-09-01

Food preparation and storage behaviors in the home deviating from the "best practice" food safety recommendations may result in foodborne illnesses. Currently, there are limited tools available to fully evaluate the consumer knowledge, perceptions, and behavior in the area of refrigerator safety. The current study aimed to develop a valid and reliable tool in the form of a questionnaire, the Consumer Refrigerator Safety Questionnaire (CRSQ), for assessing systematically all these aspects. Items relating to refrigerator safety knowledge (n =17), perceptions (n =46), and reported behavior (n =30) were developed and pilot tested by an expert reference group and various consumer groups to assess face and content validity (n =20), item difficulty and consistency (n =55), and construct validity (n =23). The findings showed that the CRSQ has acceptable face and content validity with acceptable levels of item difficulty. Item consistency was observed for 12 of 15 in refrigerator safety knowledge. Further, all 5 of the subscales of consumer perceptions of refrigerator safety practices relating to risk of developing foodborne disease showed acceptable internal consistency (Cronbach's α value > 0.8). Construct validity of the CRSQ was shown to be very good (P = 0.022). The CRSQ exhibited acceptable test-retest reliability at 14 days with the majority of knowledge items (93.3%) and reported behavior items (96.4%) having correlation coefficients of greater than 0.70. Overall, the CRSQ was deemed valid and reliable in assessing refrigerator safety knowledge and behavior; therefore, it has the potential for future use in identifying groups of individuals at increased risk of deviating from recommended refrigerator safety practices, as well as the assessment of refrigerator safety knowledge and behavior for use before and after an intervention.

Two-Year Follow-up of the Collision Auto Repair Safety Study (CARSS)

Science.gov (United States)

Bejan, Anca; Parker, David L.; Brosseau, Lisa M.; Xi, Min; Skan, Maryellen

2015-01-01

This paper presents an evaluation of the sustainability of health and safety improvements in small auto collision shops 1 year after the implementation of a year-long targeted intervention. During the first year (active phase), owners received quarterly phone calls, written reminders, safety newsletters, and access to online services and in-person assistance with creating safety programs and respirator fit testing. During the second year (passive phase), owners received up to three postcard reminders regarding the availability of free health and safety resources. Forty-five shops received an evaluation at baseline and at the end of the first year (Y1). Of these, 33 were evaluated at the end of the second year (Y2), using the same 92-item assessment tool. At Y1, investigators found that between 70 and 81% of the evaluated items were adequate in each business (mean = 73% items, SD = 11%). At Y2, between 63 and 89% of items were deemed adequate (mean = 73% items, SD = 9.5%). Three safety areas demonstrated statistically significant (P < 0.05) changes: compressed gasses (8% improvement), personal protective equipment (7% improvement), and respiratory protection (6% decline). The number of postcard reminders sent to each business did not affect the degree to which shops maintained safety improvements made during the first year of the intervention. However, businesses that received more postcards were more likely to request assistance services than those receiving fewer. PMID:25539646

The problem of maintenance of strength, lifetime and safety of the structural components operational NPP from items of a system approach

International Nuclear Information System (INIS)

Getman, A.F.

2005-01-01

The strength of the structural components and pipelines NPP determines largely their lifetime, radiation and nuclear safety. As shows world experience of operation NPP, in a series of cases during operation the local damages, breaks and destructions of elements of the equipment and pipelines emerge. These cases force maintaining organizations to execute on NPP large volumes of the control, repair and modernizing of the equipment and pipelines. These activities require large material inputs (net less than 50% of the cost of operation NPP), however not always are effective and in a series of cases do not allow to reach required of level reliability and safety. The reason of such condition of a problem is that the measures executed on NPP, developed on stretch of long time and under influence of the diverse factors. Besides until now there is no unified scientific methodology of a case study of maintenance of strength, lifetime and safety of the operational equipment and pipelines NPP. The application of a system approach to a problem of maintenance of strength, lifetime and safety of the equipment and pipelines operational NPP allows to consider a problem as a whole, from unified items, to define the most fast and effective paths it of the solution and to decide problems in as much as possible short times at minimum material inputs. The experience of practical application of a system approach at the solution of separate problems of operation NPP has allowed to develop a lot of effective new techniques, technologies and means, which application allows essentially to increase reliability and gamma percentage lifetime of elements NPP, to which they were applied. As an example in the report the outcomes of application of a system approach for maintenance of SG tubes integrity of reactors of a type WWER are adduced. The application of a system approach for all elements of the equipment and pipelines NPP will allow to increase it reliability and safety not less, than on 10

Research oil guidelines for safety review of category 2 waste disposal

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

Safety confirmation items and monitoring items for engineered barriers were compiled, considering the current technical status and monitoring plan for the simulated subsurface disposal and its test facilities. In order to develop the guidelines of the safety review for the disposal of LLW generated from RI facilities and research facilities, technical issues relating toxic substances were surveyed. (author)

Class 2 piping rules in elevated temperature applications compared with Class 1 prescriptions for LMFBRs

International Nuclear Information System (INIS)

Capello, R.; Stretti, G.; Cesari, F.G.

1989-01-01

An LMFBR plant has many piping systems subjected to elevated temperature (> 427 o C) which, depending on their function and safety criteria, are classified as of quality level 1 or 2. The design of class 1 and class 2 piping for elevated temperatures is performed in accordance with ASME CCN-47 and CCN-253 respectively. This paper discusses what level of knowledge and analysis is necessary, to apply the rules of class 2 (CCN-253) rather than those of class 1 (CCN-47) for the design analysis of piping systems. From the designer viewpoint the burden of verification is much greater in class 1 than in class 2. This paper also examines the reliability of class 2 rules for elevated temperature when used to obtain structural results and justify the design of class 1 systems. In fact it can be shown that in some cases it is possible to design class 1 piping systems using class 2 rules. (author)

Marginal Maximum Likelihood Estimation of Item Response Models in R

Directory of Open Access Journals (Sweden)

Matthew S. Johnson

2007-02-01

Full Text Available Item response theory (IRT models are a class of statistical models used by researchers to describe the response behaviors of individuals to a set of categorically scored items. The most common IRT models can be classified as generalized linear fixed- and/or mixed-effect models. Although IRT models appear most often in the psychological testing literature, researchers in other fields have successfully utilized IRT-like models in a wide variety of applications. This paper discusses the three major methods of estimation in IRT and develops R functions utilizing the built-in capabilities of the R environment to find the marginal maximum likelihood estimates of the generalized partial credit model. The currently available R packages ltm is also discussed.

Using existing questionnaires in latent class analysis: should we use summary scores or single items as input? A methodological study using a cohort of patients with low back pain

Directory of Open Access Journals (Sweden)

Nielsen AM

2016-04-01

Full Text Available Anne Molgaard Nielsen,1 Werner Vach,2 Peter Kent,1,3 Lise Hestbaek,1,4 Alice Kongsted1,4 1Department of Sports Science and Clinical Biomechanics, University of Southern Denmark, Odense, Denmark; 2Center for Medical Biometry and Medical Informatics, Medical Center, University of Freiburg, Freiburg, Germany; 3School of Physiotherapy and Exercise Science, Curtin University, Perth, Australia; 4Nordic Institute of Chiropractic and Clinical Biomechanics, University of Southern Denmark, Odense, Denmark Background: Latent class analysis (LCA is increasingly being used in health research, but optimal approaches to handling complex clinical data are unclear. One issue is that commonly used questionnaires are multidimensional, but expressed as summary scores. Using the example of low back pain (LBP, the aim of this study was to explore and descriptively compare the application of LCA when using questionnaire summary scores and when using single items to subgrouping of patients based on multidimensional data. Materials and methods: Baseline data from 928 LBP patients in an observational study were classified into four health domains (psychology, pain, activity, and participation using the World Health Organization’s International Classification of Functioning, Disability, and Health framework. LCA was performed within each health domain using the strategies of summary-score and single-item analyses. The resulting subgroups were descriptively compared using statistical measures and clinical interpretability. Results: For each health domain, the preferred model solution ranged from five to seven subgroups for the summary-score strategy and seven to eight subgroups for the single-item strategy. There was considerable overlap between the results of the two strategies, indicating that they were reflecting the same underlying data structure. However, in three of the four health domains, the single-item strategy resulted in a more nuanced description, in terms

A Bifactor Multidimensional Item Response Theory Model for Differential Item Functioning Analysis on Testlet-Based Items

Science.gov (United States)

Fukuhara, Hirotaka; Kamata, Akihito

2011-01-01

A differential item functioning (DIF) detection method for testlet-based data was proposed and evaluated in this study. The proposed DIF model is an extension of a bifactor multidimensional item response theory (MIRT) model for testlets. Unlike traditional item response theory (IRT) DIF models, the proposed model takes testlet effects into…

Self assessment of safety culture in HANARO using the code of conduct on the safety of research reactor by IAEA

International Nuclear Information System (INIS)

Lim, I.C.; Hwang, S.Y.; Woo, J.S.; Lee, M.; Jun, B.J.

2003-01-01

Full text: The safety culture in HANARO was self-assessed in accordance with the Code of Conduct on the Safety of Research Reactor drafted by IAEA. From 2002, IAEA has worked on the development of the Code of Conduct to achieve and maintain high level of nuclear safety in research reactors worldwide through the enhancement of national measures and international co-operation including, where appropriate, safety related technical cooperation. It defines the role of the state, the role of the regulatory body, the role of the operating organization and the role of the IAEA. As for the role of operating organization, the code specifies general requirements in assessment and verification of safety, financial and human resources, quality assurance, human factors, radiation protection and emergency preparedness. It also defines the role of operating organization for safety of research reactor in siting, design, operation, maintenance, modification and utilization as well. All of these items are the subjects for safety culture implementation, which means the Code could be a guideline for an operating organization to assess its safety culture. The self-assessment of safety culture in HANARO was made by using the sections of the Code describing the role of the operating organization for safety of research reactor. The major assessment items and the practices in HANARO for each items are as follow: The SAR of HANARO was reviewed by the regulatory body before the construction and the fuel loading of HANARO. Major design modifications and new installation of utilization facility needs the approval from regulatory body and safety assessment is a requirement for the approval. The Tech. Spec. for HANARO Operation specifies the analysis, surveillance, testing and inspection for HANARO operation. The reactor operation is mainly supported by the government and partly by nuclear R and D fund. The education and training of operation staff are one of major tasks of operating organization

Gender-Based Differential Item Performance in Mathematics Achievement Items.

Science.gov (United States)

Doolittle, Allen E.; Cleary, T. Anne

1987-01-01

Eight randomly equivalent samples of high school seniors were each given a unique form of the ACT Assessment Mathematics Usage Test (ACTM). Signed measures of differential item performance (DIP) were obtained for each item in the eight ACTM forms. DIP estimates were analyzed and a significant item category effect was found. (Author/LMO)

Development of a Quality and Safety Competency Curriculum for Radiation Oncology Residency: An International Delphi Study

International Nuclear Information System (INIS)

Adleman, Jenna; Gillan, Caitlin; Caissie, Amanda; Davis, Carol-Anne; Liszewski, Brian; McNiven, Andrea; Giuliani, Meredith

2017-01-01

Purpose: To develop an entry-to-practice quality and safety competency profile for radiation oncology residency. Methods and Materials: A comprehensive list of potential quality and safety competency items was generated from public and professional resources and interprofessional focus groups. Redundant or out-of-scope items were eliminated through investigator consensus. Remaining items were subjected to an international 2-round modified Delphi process involving experts in radiation oncology, radiation therapy, and medical physics. During Round 1, each item was scored independently on a 9-point Likert scale indicating appropriateness for inclusion in the competency profile. Items indistinctly ranked for inclusion or exclusion were re-evaluated through web conference discussion and reranked in Round 2. Results: An initial 1211 items were compiled from 32 international sources and distilled to 105 unique potential quality and safety competency items. Fifteen of the 50 invited experts participated in round 1: 10 radiation oncologists, 4 radiation therapists, and 1 medical physicist from 13 centers in 5 countries. Round 1 rankings resulted in 80 items included, 1 item excluded, and 24 items indeterminate. Two areas emerged more prominently within the latter group: change management and human factors. Web conference with 5 participants resulted in 9 of these 24 items edited for content or clarity. In Round 2, 12 participants rescored all indeterminate items resulting in 10 items ranked for inclusion. The final 90 enabling competency items were organized into thematic groups consisting of 18 key competencies under headings adapted from Deming's System of Profound Knowledge. Conclusions: This quality and safety competency profile may inform minimum training standards for radiation oncology residency programs.

Development of a Quality and Safety Competency Curriculum for Radiation Oncology Residency: An International Delphi Study

Energy Technology Data Exchange (ETDEWEB)

Adleman, Jenna [Department of Radiation Oncology, University of Toronto, Toronto, Ontario (Canada); Gillan, Caitlin [Department of Radiation Oncology, University of Toronto, Toronto, Ontario (Canada); Radiation Medicine Program, Princess Margaret Cancer Centre, Toronto, Ontario (Canada); Caissie, Amanda [Department of Radiation Oncology, Dalhousie University, Halifax, Nova Scotia (Canada); Saint John Regional Hospital, Saint John, New Brunswick (Canada); Davis, Carol-Anne [Department of Radiation Oncology, Dalhousie University, Halifax, Nova Scotia (Canada); Nova Scotia Cancer Centre, Halifax, Nova Scotia (Canada); Liszewski, Brian [Odette Cancer Centre, Sunnybrook Health Sciences Centre, Toronto, Ontario (Canada); McNiven, Andrea [Department of Radiation Oncology, University of Toronto, Toronto, Ontario (Canada); Radiation Medicine Program, Princess Margaret Cancer Centre, Toronto, Ontario (Canada); Giuliani, Meredith, E-mail: Meredith.Giuliani@rmp.uhn.ca [Department of Radiation Oncology, University of Toronto, Toronto, Ontario (Canada); Radiation Medicine Program, Princess Margaret Cancer Centre, Toronto, Ontario (Canada)

2017-06-01

Purpose: To develop an entry-to-practice quality and safety competency profile for radiation oncology residency. Methods and Materials: A comprehensive list of potential quality and safety competency items was generated from public and professional resources and interprofessional focus groups. Redundant or out-of-scope items were eliminated through investigator consensus. Remaining items were subjected to an international 2-round modified Delphi process involving experts in radiation oncology, radiation therapy, and medical physics. During Round 1, each item was scored independently on a 9-point Likert scale indicating appropriateness for inclusion in the competency profile. Items indistinctly ranked for inclusion or exclusion were re-evaluated through web conference discussion and reranked in Round 2. Results: An initial 1211 items were compiled from 32 international sources and distilled to 105 unique potential quality and safety competency items. Fifteen of the 50 invited experts participated in round 1: 10 radiation oncologists, 4 radiation therapists, and 1 medical physicist from 13 centers in 5 countries. Round 1 rankings resulted in 80 items included, 1 item excluded, and 24 items indeterminate. Two areas emerged more prominently within the latter group: change management and human factors. Web conference with 5 participants resulted in 9 of these 24 items edited for content or clarity. In Round 2, 12 participants rescored all indeterminate items resulting in 10 items ranked for inclusion. The final 90 enabling competency items were organized into thematic groups consisting of 18 key competencies under headings adapted from Deming's System of Profound Knowledge. Conclusions: This quality and safety competency profile may inform minimum training standards for radiation oncology residency programs.

The effectiveness of a bicycle safety program for improving safety-related knowledge and behavior in young elementary students.

Science.gov (United States)

McLaughlin, Karen A; Glang, Ann

2010-05-01

The purpose of this study was to evaluate the "Bike Smart" program, an eHealth software program that teaches bicycle safety behaviors to young children. Participants were 206 elementary students in grades kindergarten to 3. A random control design was employed to evaluate the program, with students assigned to either the treatment condition (Bike Smart) or the control condition (a video on childhood safety). Outcome measures included computer-based knowledge items (safety rules, helmet placement, hazard discrimination) and a behavioral measure of helmet placement. Results demonstrated that regardless of gender, cohort, and grade the participants in the treatment group showed greater gains than control participants in both the computer-presented knowledge items (p > .01) and the observational helmet measure (p > .05). Findings suggest that the Bike Smart program can be a low cost, effective component of safety training packages that include both skills-based and experiential training.

Latent Classes of Symptoms related to Clinically Depressed Mood in Adolescents.

Science.gov (United States)

Blom, Eva Henje; Forsman, Mats; Yang, Tony T; Serlachius, Eva; Larsson, Jan-Olov

2014-01-01

The diagnosis of major depressive disorder (MDD), according to the Diagnostic and Statistical Manual of Mental Disorders , is based only on adult symptomatology of depression and not adapted for age and gender. This may contribute to the low diagnostic specificity and validity of adolescent MDD. In this study, we investigated whether latent classes based on symptoms associated with depressed mood could be identified in a sample of adolescents seeking psychiatric care, regardless of traditionally defined diagnostic categories. Self-reports of the Strengths and Difficulties Questionnaire and the Development and Well-Being Assessment were collected consecutively from all new patients between the ages of 13 and 17 years at two psychiatric outpatient clinics in Stockholm, Sweden. Those who reported depressed mood at intake yielded a sample of 21 boys and 156 girls. Latent class analyses were performed for all screening items and for the depression-specific items of the Development and Well-Being Assessment. The symptoms that were reported in association with depressed mood differentiated the adolescents into two classes. One class had moderate emotional severity scores on the Strengths and Difficulties Questionnaire and mainly symptoms that were congruent with the Diagnostic and Statistical Manual of Mental Disorders criteria for MDD. The other class had higher emotional severity scores and similar symptoms to those reported in the first class. However, in addition, this group demonstrated more diverse symptomatology, including vegetative symptoms, suicidal ideation, anxiety, conduct problems, body dysmorphic symptoms, and deliberate vomiting. The classes predicted functional impairment in that the members of the second class showed more functional impairment. The relatively small sample size limited the generalizability of the results of this study, and the amount of items included in the analysis was restricted by the rules of latent class analysis. No conclusions

Evaluation of psychometric properties and differential item functioning of 8-item Child Perceptions Questionnaires using item response theory.

Science.gov (United States)

Yau, David T W; Wong, May C M; Lam, K F; McGrath, Colman

2015-08-19

Four-factor structure of the two 8-item short forms of Child Perceptions Questionnaire CPQ11-14 (RSF:8 and ISF:8) has been confirmed. However, the sum scores are typically reported in practice as a proxy of Oral health-related Quality of Life (OHRQoL), which implied a unidimensional structure. This study first assessed the unidimensionality of 8-item short forms of CPQ11-14. Item response theory (IRT) was employed to offer an alternative and complementary approach of validation and to overcome the limitations of classical test theory assumptions. A random sample of 649 12-year-old school children in Hong Kong was analyzed. Unidimensionality of the scale was tested by confirmatory factor analysis (CFA), principle component analysis (PCA) and local dependency (LD) statistic. Graded response model was fitted to the data. Contribution of each item to the scale was assessed by item information function (IIF). Reliability of the scale was assessed by test information function (TIF). Differential item functioning (DIF) across gender was identified by Wald test and expected score functions. Both CPQ11-14 RSF:8 and ISF:8 did not deviate much from the unidimensionality assumption. Results from CFA indicated acceptable fit of the one-factor model. PCA indicated that the first principle component explained >30 % of the total variation with high factor loadings for both RSF:8 and ISF:8. Almost all LD statistic items suggesting little contribution of information to the scale and item removal caused little practical impact. Comparing the TIFs, RSF:8 showed slightly better information than ISF:8. In addition to oral symptoms items, the item "Concerned with what other people think" demonstrated a uniform DIF (p Items related to oral symptoms were not informative to OHRQoL and deletion of these items is suggested. The impact of DIF across gender on the overall score was minimal. CPQ11-14 RSF:8 performed slightly better than ISF:8 in measurement precision. The 6-item short forms

Design and Evaluation of the Electronic Class Record for LPU-Laguna International School

OpenAIRE

RHOWEL M. DELLOSA

2014-01-01

- This study aimed to design, develop, deploy and evaluate an electronic class record (e-class record). Microsoft Excel is used to develop the electronic class record and several Microsoft Excel arithmetic operands and functions like VLOOKUP, IF, AVERAGE, COUNTIF are used. A worksheet template was developed to accept name of teacher, course code, course title, section, schedule, room, student number, student name, grade level, gender, date of each classes, base grade, test items a...

The safety and clinical outcomes of chemoembolization in child-pugh class C patients with hepatocellular carcinomas

Energy Technology Data Exchange (ETDEWEB)

Choi, Tae Won; Kim, Hyo Cheol; Lee, Jeong Hoon; Yu, Su Jong; Kang, Beom Sik; Hur, Sae Beom; Lee, Myung Su; Jae, Hwan Jun; Chung, Jin Wook [Seoul National University College of Medicine, Seoul National University Hospital, Seoul (Korea, Republic of)

2015-12-15

To evaluate the safety and clinical outcomes of chemoembolization in Child-Pugh class C patients with hepatocellular carcinomas (HCC). The study comprised 55 patients with HCC who were classified as Child-Pugh class C and who underwent initial chemoembolization between January 2003 and December 2012. Selective chemoembolization was performed in all technically feasible cases to minimize procedure-related complications. All adverse events within 30 days were recorded using the Common Terminology Criteria for Adverse Events (CTCAE). The tumor response to chemoembolization was evaluated using the modified Response Evaluation Criteria In Solid Tumors. Thirty (54.5%) patients were within the Milan criteria, and 25 (45.5%) were beyond. The mortality of study subjects at 30 days was 5.5%. Major complications were observed in five (9.1%) patients who were all beyond the Milan criteria: two hepatic failures, one hepatic encephalopathy, and two CTCAE grade 3 increases in aspartate aminotransferase/alanine aminotransferase abnormality. The mean length of hospitalization was 6.3 ± 8.3 days (standard deviation), and 18 (32.7%) patients were discharged on the next day after chemoembolization. The tumor responses of the patients who met the Milan criteria were significantly higher (p = 0.014) than those of the patients who did not. The overall median survival was 7.1 months (95% confidence interval: 4.4-9.8 months). Even in patients with Child-Pugh class C, chemoembolization can be performed safely with a selective technique in selected cases with a small tumor burden.

Results on safety research for five years (from fiscal year 1996 to 2000). A field of nuclear fuel cycle

International Nuclear Information System (INIS)

2001-10-01

This safety research carried out by the Japan Nuclear Cycle Development Institute (JNC) for five years ranged from fiscal year 1996 to 2000, was performed according to the safety research basic plan (from fiscal year 1996 to 2000) established on March, 1996 (revised again on May, 2000). This report was arranged on a field on nuclear fuel cycle (all subjects on fields of nuclear fuel facility, environmental radioactivity and radioactive wastes and a subject on nuclear fuel cycle in a field of seismic resistant and probabilistic safety assessment) by combining its research results for five years ranged from 1996 to 2000 fiscal year with general outlines on the safety research basic plan. Here were shown outlines on the safety research basic plan, aims and subjects on safety research at a field of nuclear fuel cycle, a list of survey sheets on safety research result, and survey sheets on safety research results. The survey sheets containing research field, title, organization, researcher name, researching period, names of cooperative organization, using facilities, research outline, research results, established contents, application, and research trends, are ranged to 21 items on nuclear fuel facility, 1 item on seismic resistance, 2 items on probabilistic safety assessment, 8 items on environmental radioactivity, and 20 items on radioactive wastes. (G.K.)

Safety level assessment in the production environment using Fuzzy logic

Directory of Open Access Journals (Sweden)

2012-05-01

Conclusion: The application of the proposed method can reveal which safety items and factors are most important in improving workers safety, and therefore decide where to concentrate resources in order to improve the safety of the work environment.

[Analysis of the current situation the oral medical interns' awareness on occupation safety behavior in college].

Science.gov (United States)

Hongyan, Song; Yu, Wang; Rongrong, He; Ying, Xu

2015-04-01

This study aims to determine the awareness oral medical interns about occupation safety protection of knowledge and to present a scientific basis for perfecting the occupation safety education system and standard protection behavior. A self-designed questionnaire that used a retrospective questionnaire survey on 425 stomatological interns, scoring, and statistical analysis of the survey were performed. The questionnaire included occupation safety prevention knowledge, behavior cognitive, and protective behavior, among others. The questionnaire recovery rate was 100%, and the average scores of the prevention knowledge and behavior cognitive were 4.55 ± 0.91 and 4.40 ± 1.05, respectively. More than 90% interns can conduct the conventional protection, and less than 40% can perform special protection. For the item "occupation safety protection knowledge", the scores of three grade III hospitals were higher than that of stomatological hospitals and second level of first-class hospitals; the difference was statistically significant (P safety protection knowledge, behavioral cognitive, and protection behavior. The average score was higher for than for boys in the three contents, and the average score of interns accepting pre-job training was higher than those rejected; the difference was statistically significant (P safety knowledge of oral medical interns is not sufficient, and the protective behavior is poor. Schools and hospitals should strengthen the intern occupation safety and protection education and improve the status of occupation safety behavior.

Commercial Grade Item (CGI) Dedication for Leak Detection Relays

International Nuclear Information System (INIS)

KOCH, M.R.; JOHNS, B.R.

1999-01-01

This Test Plan provides a test method to dedicate the leak detection relays used on the new Pumping and Instrumentation Control (PIC) skids. The new skids are fabricated on-site. The leak detection system is a safety class system per the Authorization Basis

Mechanical Property Characteristics of Butt-Fusion Joint of High Density Polyethylene Pipe for NPP Safety Class Application

International Nuclear Information System (INIS)

Oh, Youngjin; Kim, Kyoungsu; Lee, Seunggun; Park, Heungbae; Yu, Jeongho; Kim, Jongsung; Kim, Jeonghyun; Jang, Changheui; Choi, Sunwoong

2013-01-01

Several NPPs in United States replaced parts of sea water or raw water system pipes to HDPE (high density polyethylene) pipes, which have outstanding resistance for oxidation and seismic loading. ASME B and PV code committee developed Code Case N-755, which describes rules for the construction of Safety Class 3 polyethylene pressure piping components. Several NPP's in US proposed relief requests in order to apply Code Case N-755. Although US NRC permitted using Code Case N-755 and HDPE materials for Class 3 buried piping, their permission was limited to only 10 years because of several concerns for material performance of HDPE. US NRC's major concerns are about material properties and the quality of fusion zone of HDPE. In this study, material property tests for HDPE fusion zone are conducted with varying standard fusion procedures. Mechanical property tests for fused material for HDPE pipes were conducted. Fused material shows lower toughness than base material and fused material of lower fusion pressure shows higher toughness than that of higher fusion pressure

The patient safety climate in healthcare organizations (PSCHO) survey: Short-form development.

Science.gov (United States)

Benzer, Justin K; Meterko, Mark; Singer, Sara J

2017-08-01

Measures of safety climate are increasingly used to guide safety improvement initiatives. However, cost and respondent burden may limit the use of safety climate surveys. The purpose of this study was to develop a 15- to 20-item safety climate survey based on the Patient Safety Climate in Healthcare Organizations survey, a well-validated 38-item measure of safety climate. The Patient Safety Climate in Healthcare Organizations was administered to all senior managers, all physicians, and a 10% random sample of all other hospital personnel in 69 private sector hospitals and 30 Veterans Health Administration hospitals. Both samples were randomly divided into a derivation sample to identify a short-form subset and a confirmation sample to assess the psychometric properties of the proposed short form. The short form consists of 15 items represented 3 overarching domains in the long-form scale-organization, work unit, and interpersonal. The proposed short form efficiently captures 3 important sources of variance in safety climate: organizational, work-unit, and interpersonal. The short-form development process was a practical method that can be applied to other safety climate surveys. This safety climate short form may increase response rates in studies that involve busy clinicians or repeated measures. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

[Student Magazine of the ESL Classes of the International Ladies' Garment Workers' Union (ILGWU).

Science.gov (United States)

Alvarez, Manuel, Ed.; Zetino, Alfredo, Ed.

This student magazine created by the English-as-a-Second-Language (ESL) classes of the International Ladies' Garment Workers' Union (ILGWU) is a collection of personal opinions, reports, and creative writing with illustrations. Each item was written as a voluntary collaboration, homework, or classwork. Items include poems, letters, accounts of…

Automatic item generation implemented for measuring artistic judgment aptitude.

Science.gov (United States)

Bezruczko, Nikolaus

2014-01-01

Automatic item generation (AIG) is a broad class of methods that are being developed to address psychometric issues arising from internet and computer-based testing. In general, issues emphasize efficiency, validity, and diagnostic usefulness of large scale mental testing. Rapid prominence of AIG methods and their implicit perspective on mental testing is bringing painful scrutiny to many sacred psychometric assumptions. This report reviews basic AIG ideas, then presents conceptual foundations, image model development, and operational application to artistic judgment aptitude testing.

Aging techniques and qualified life for safety system components

International Nuclear Information System (INIS)

Weaver, W.W.

1980-01-01

Presently, the qualified life objective for Class IE safety system components in nuclear power plants is somewhat of a subjective engineering judgment. When the desired qualified life is ascertained, there are other choices that must be made (which may be influenced by the desired qualified life) such as selecting the aging procedure to use in the qualification process. Adding complexity to the situation is the fact that there are some limitations in aging techniques at the present time. This article presents (1) a discussion of the limitations in aging procedures, (2) the general philosophy of qualification, and (3) a proposed method for specifying a desired qualified life, which uses a probabilistic approach. The probabilistic approach proposed in item 3 can be applied to natural aging programs and eventually to accelerated aging once the present technical difficulties are overcome

AEC sets five year nuclear safety research program

International Nuclear Information System (INIS)

Anon.

1976-01-01

The research by the government for the establishment of means of judging the adequacy of safety measures incorporated in nuclear facilities, including setting safety standards and collecting documents of general criteria, and the research by the industry on safety measures and the promotion of safety-related technique are stated in the five year program for 1976-80 reported by subcommittees, Atomic Energy Commission (AEC). Four considerations on the research items incorporated in the program are 1) technical programs relating to the safety of nuclear facilities and the necessary criteria, 2) priority of the relevant items decided according to their impact on circumstances, urgency, the defence-indepth concept and so on, 3) consideration of all relevant data and documents collected, and research subjects necessary to quantify safety measurement, and 4) consideration of technological actualization, the capability of each research body, the budget and the time schedule. In addition, seven major themes decided on the basis of these points are 1) reactivity-initiated accident, 2) LOCA, 3) fuel behavior, 4) structural safety, 5) radioactive release, 6) statistical method of safety evaluation, and 7) seismic characteristics. The committee has deliberated the appropriate division of researches between the government and the industry. A set of tables showing the nuclear safety research plan for 1976-80 are attached. (Iwakiri, K.)

Characteristics of the safety climate in teams with world-class safety ...

African Journals Online (AJOL)

Accidents and incidents in the construction environment are not reduced or eliminated effectively, despite numerous efforts made to improve health and safety in the industry. An extensive field of research has been conducted on how teams in the construction environment interact to deliver a project successfully in terms of ...

[Development and validation of the Korean patient safety culture scale for nursing homes].

Science.gov (United States)

Yoon, Sook Hee; Kim, Byungsoo; Kim, Se Young

2013-06-01

The purpose of this study was to develop a tool to evaluate patient safety culture in nursing homes and to test its validity and reliability. A preliminary tool was developed through interviews with focus group, content validity tests, and a pilot study. A nationwide survey was conducted from February to April, 2011, using self-report questionnaires. Participants were 982 employees in nursing homes. Data were analyzed using Cronbach's alpha, item analysis, factor analysis, and multitrait/multi-Item analysis. From the results of the analysis, 27 final items were selected from 49 items on the preliminary tool. Items with low correlation with total scale were excluded. The 4 factors sorted by factor analysis contributed 63.4% of the variance in the total scale. The factors were labeled as leadership, organizational system, working attitude, management practice. Cronbach's alpha for internal consistency was .95 and the range for the 4 factors was from .86 to .93. The results of this study indicate that the Korean Patient Safety Culture Scale has reliability and validity and is suitable for evaluation of patient safety culture in Korean nursing homes.

Investigation of nuclear power safety objects

International Nuclear Information System (INIS)

2003-09-01

It is a report of ground and concept of nuclear safety objects and future issues in Japan, which has investigated by the Committee of Experts on Investigation of Nuclear Safety Objects in the Nuclear Safety Research Association. The report consisted of member of committee, main conclusions and five chapters. The first chapter contains construction of safety objects and range of object, the second chapter qualitative safety objects, the third chapter quantitative safety objects, the forth subsiding objects and the fifth other items under consideration. The qualitative safety objects on individual and society, the quantitative one on effects on health and social cost, aspect of safety objects, relation between radiation protection and safety objects, practical objective values and earthquake are stated. (S.Y.)

Stability of the Spanish version of the five-item Francis Scale of Attitude toward Christianity.

Science.gov (United States)

Miranda-Tapia, Giskar Alonso; Cogollo, Zuleima; Herazo, Edwin; Campo-Arias, Adalberto

2010-12-01

The aim of this study was to establish test-retest reliability of a Spanish version of the Francis Scale of Attitude toward Christianity (Campo-Arias, Oviedo, & Cogollo, 2009) among adolescent students in Cartagena, Colombia. A group of ninth grade students from two public schools in Colombia (N = 157) completed the five-item scale. Cronbach's alphas were .74 and .76 in the first and second administrations, respectively. Both Pearson's rho and intra-class correlation coefficient were .69. A Spanish translation of the 5-item scale had consistent stability over four weeks.

Safety advice sheets

CERN Multimedia

HSE Unit

2013-01-01

You never know when you might be faced with questions such as: when/how should I dispose of a gas canister? Where can I find an inspection report? How should I handle/store/dispose of a chemical substance…?   The SI section of the DGS/SEE Group is primarily responsible for safety inspections, evaluating the safety conditions of equipment items, premises and facilities. On top of this core task, it also regularly issues “Safety Advice Sheets” on various topics, designed to be of assistance to users but also to recall and reinforce safety rules and procedures. These clear and concise sheets, complete with illustrations, are easy to display in the appropriate areas. The following safety advice sheets have been issued so far: Other sheets will be published shortly. Suggestions are welcome and should be sent to the SI section of the DGS/SEE Group. Please send enquiries to general-safety-visits.service@cern.ch.

A Diagnostic Study of Pre-Service Teachers' Competency in Multiple-Choice Item Development

Science.gov (United States)

Asim, Alice E.; Ekuri, Emmanuel E.; Eni, Eni I.

2013-01-01

Large class size is an issue in testing at all levels of Education. As a panacea to this, multiple choice test formats has become very popular. This case study was designed to diagnose pre-service teachers' competency in constructing questions (IQT); direct questions (DQT); and best answer (BAT) varieties of multiple choice items. Subjects were 88…

Evaluation of item candidates for a diabetic retinopathy quality of life item bank.

Science.gov (United States)

Fenwick, Eva K; Pesudovs, Konrad; Khadka, Jyoti; Rees, Gwyn; Wong, Tien Y; Lamoureux, Ecosse L

2013-09-01

We are developing an item bank assessing the impact of diabetic retinopathy (DR) on quality of life (QoL) using a rigorous multi-staged process combining qualitative and quantitative methods. We describe here the first two qualitative phases: content development and item evaluation. After a comprehensive literature review, items were generated from four sources: (1) 34 previously validated patient-reported outcome measures; (2) five published qualitative articles; (3) eight focus groups and 18 semi-structured interviews with 57 DR patients; and (4) seven semi-structured interviews with diabetes or ophthalmic experts. Items were then evaluated during 3 stages, namely binning (grouping) and winnowing (reduction) based on key criteria and panel consensus; development of item stems and response options; and pre-testing of items via cognitive interviews with patients. The content development phase yielded 1,165 unique items across 7 QoL domains. After 3 sessions of binning and winnowing, items were reduced to a minimally representative set (n = 312) across 9 domains of QoL: visual symptoms; ocular surface symptoms; activity limitation; mobility; emotional; health concerns; social; convenience; and economic. After 8 cognitive interviews, 42 items were amended resulting in a final set of 314 items. We have employed a systematic approach to develop items for a DR-specific QoL item bank. The psychometric properties of the nine QoL subscales will be assessed using Rasch analysis. The resulting validated item bank will allow clinicians and researchers to better understand the QoL impact of DR and DR therapies from the patient's perspective.

Results on safety research for five years (from fiscal year 1996 to 2000). A field of power reactors

International Nuclear Information System (INIS)

2001-10-01

This safety research carried out by the Japan Nuclear Cycle Development Institute (JNC) for five years ranged from 1996 to 2000 fiscal year, was performed according to the safety research basic plan (from 1996 to 2000 fiscal year) established on March, 1996 (revised again on May, 2000). This report was arranged on a field on power reactors (all subjects on fields of advanced conversion reactor and a subject on power reactor in a field of seismic resistant and probability theoretical safety evaluation) by combining its research results for five years ranged from 1996 to 2000 fiscal year with general outlines on the safety research basic plan. Here were shown outlines on the safety research basic plan, aims and subjects on safety research at a field of power reactors, a list of survey sheets on safety research result, and survey sheets on safety research results. The survey sheets containing research field, title, organization, researcher name, researching period, names of cooperative organization, using facilities, research outline, research results, established contents, application, and research trends, are ranged to 5 items on advanced conversion reactor, 29 items on high breeder reactor, 1 item on seismic resistance, and 5 items on probability theoretical safety evaluation. (G.K.)

Walkdown procedure: Seismic adequacy review of safety class 3 ampersand 4 commodities in 2736-Z ampersand ZB buildings at PFP facility

International Nuclear Information System (INIS)

Ocoma, E.C.

1995-01-01

Seismic evaluation of existing safety class (SC) 3 and non-SC 4 commodities at the Plutonium Finishing Plant (PFP) is integrated into an area walkdown program. Field walkdowns of potential PFP seismic deficiencies associated with structural failure and falling will be performed using the DOE SQUG/EPRI methodology. Potential proximity interactions are also addressed. Objective of the walkdown is to qualify as much of the equipment as practical and to identify candidates for further evaluation

The role of attention in item-item binding in visual working memory.

Science.gov (United States)

Peterson, Dwight J; Naveh-Benjamin, Moshe

2017-09-01

An important yet unresolved question regarding visual working memory (VWM) relates to whether or not binding processes within VWM require additional attentional resources compared with processing solely the individual components comprising these bindings. Previous findings indicate that binding of surface features (e.g., colored shapes) within VWM is not demanding of resources beyond what is required for single features. However, it is possible that other types of binding, such as the binding of complex, distinct items (e.g., faces and scenes), in VWM may require additional resources. In 3 experiments, we examined VWM item-item binding performance under no load, articulatory suppression, and backward counting using a modified change detection task. Binding performance declined to a greater extent than single-item performance under higher compared with lower levels of concurrent load. The findings from each of these experiments indicate that processing item-item bindings within VWM requires a greater amount of attentional resources compared with single items. These findings also highlight an important distinction between the role of attention in item-item binding within VWM and previous studies of long-term memory (LTM) where declines in single-item and binding test performance are similar under divided attention. The current findings provide novel evidence that the specific type of binding is an important determining factor regarding whether or not VWM binding processes require attention. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Development and applications of a safety assessment system for promoting safety culture in nuclear power plants

International Nuclear Information System (INIS)

Takano, Ken-ichi; Hasegawa, Naoko; Hirose, Ayako; Hayase, Ken-ichi

2004-01-01

For past five years, CRIEPI has been continuing efforts to develop and make applications of a 'safety assessment system' which enable to measure the safety level of organization. This report describe about frame of the system, assessment results and its reliability, and relation between labor accident rate in the site and total safety index (TSI), which can be obtained by the principal factors analysis. The safety assessment in this report is based on questionnaire survey of employee. The format and concrete questionnaires were developed using existing literatures including organizational assessment tools. The tailored questionnaire format involved 124 questionnaire items. The assessment results could be considered as a well indicator of the safety level of organization, safety management, and safety awareness of employee. (author)

Nuclear safety chains

International Nuclear Information System (INIS)

Robbins, M.C.; Eames, G.F.; Mayell, J.R.

1981-01-01

An original scheme has been developed for expressing the complex interrelationships associated with the engineered safeguards provided for a nuclear power station. This management tool, based upon network diagrams called Nuclear Safety Chains, looks at the function required of a particular item of safety plant, defines all of the vital supplies and support features necessary for successful operation, and expresses them in visual form, to facilitate analysis and optimisation for operations and maintenance staff. The safety chains are confined to manual schemes at present, although they are designed to be compatible with modern computer techniques. Their usefulness with any routine maintenance planning application on high technology plant is already being appreciated. (author)

A Study on the Determination of Power Supply Class for HVAC System in KJRR

International Nuclear Information System (INIS)

Kim, Hagtae; Kim, Minjin; Suh, Yong-Suk; Kim, Jun-Yeon; Chae, Hee-Taek

2016-01-01

The purpose of this paper is to propose an appropriate electrical class, power supply class, and operation logic for the major equipment of the HVAC system such as a Confinement Isolation Damper (CID), Fission Molybdenum Isolation Damper (FID), Air Handling Unit (AHU), Air Cleaning Unit (ACU), and Contaminated Air Purification System (CAPS) in light of their functional requirements and importance. The classification for the overall HVAC system of the KJRR is a safety class NNS, Non-Seismic category, quality class S, and electrical class Non-1E. Exceptionally, the CID and FID are safety class 3, seismic category I, and quality class Q. The electrical class for the major equipment of the HVAC system should be determined considering the operation concept during Loss of Normal Electric Power (LOEP) regardless of the safety class. In this paper, the electrical and power supply class is determined and the operation logic is proposed for the major equipment of the HVAC system for the KJRR such as the CID, FID, CAPS, ACU, and AHU. The electrical class Non-1E is determined to implement a fail closed for the enhancement of safety. The power supply class is based on the functional requirements of each equipment. The CID, FID, CAPS, and ACU are Class III, but the AHU is Class IV by reflecting the importance and electrical load. After the recovery of the power supply, there is a difference in the operation concept for the HVAC system between the reactor building and fission molybdenum production building depending on the operator's residence time. The CID and CAPS are operated manually through procedures for checking the accident status, and the FID and ACU are operated automatically without special procedures

A Study on the Determination of Power Supply Class for HVAC System in KJRR

Energy Technology Data Exchange (ETDEWEB)

Kim, Hagtae; Kim, Minjin; Suh, Yong-Suk; Kim, Jun-Yeon; Chae, Hee-Taek [KAERI, Daejeon (Korea, Republic of)

2016-05-15

The purpose of this paper is to propose an appropriate electrical class, power supply class, and operation logic for the major equipment of the HVAC system such as a Confinement Isolation Damper (CID), Fission Molybdenum Isolation Damper (FID), Air Handling Unit (AHU), Air Cleaning Unit (ACU), and Contaminated Air Purification System (CAPS) in light of their functional requirements and importance. The classification for the overall HVAC system of the KJRR is a safety class NNS, Non-Seismic category, quality class S, and electrical class Non-1E. Exceptionally, the CID and FID are safety class 3, seismic category I, and quality class Q. The electrical class for the major equipment of the HVAC system should be determined considering the operation concept during Loss of Normal Electric Power (LOEP) regardless of the safety class. In this paper, the electrical and power supply class is determined and the operation logic is proposed for the major equipment of the HVAC system for the KJRR such as the CID, FID, CAPS, ACU, and AHU. The electrical class Non-1E is determined to implement a fail closed for the enhancement of safety. The power supply class is based on the functional requirements of each equipment. The CID, FID, CAPS, and ACU are Class III, but the AHU is Class IV by reflecting the importance and electrical load. After the recovery of the power supply, there is a difference in the operation concept for the HVAC system between the reactor building and fission molybdenum production building depending on the operator's residence time. The CID and CAPS are operated manually through procedures for checking the accident status, and the FID and ACU are operated automatically without special procedures.

Radiation Safety Management Guidelines for PET-CT: Focus on Behavior and Environment

International Nuclear Information System (INIS)

Jung, Jin Wook; Han, Eun Ok

2011-01-01

Our purpose is to specify behavior and environmental factors aimed at reducing the exposed dosage caused by PET-CT and to develop radiation safety management guidelines adequate for domestic circumstances. We have used a multistep-multimethod as the methodological approach to design and to carry out the research both in quality and quantity, including an analysis on previous studies, professional consultations and a survey. The survey includes responses from 139 practitioners in charged of 109 PET-CTs installed throughout Korea(reported by the Korean Society of Nuclear Medicine, 2010). The research use 156 questions using Cronbach's α (alpha) coefficients which were: 0.818 for 'the necessity of setting and installing the radiation protective environment'; 0.916 for 'the necessity of radiation protection', 'setting and installing the radiation protective environment'; and 0.885 for 'radiation protection'. The check list, derived from the radiation safety management guidelines focused on behavior and environment, was composed of 20 items for the radiation protective environment: including 5 items for the patient; 4 items for the guardian; 3 items for the radiologist; and 8 items applied to everyone involved; for a total of 26 items for the radiation protective behavior including: 12 items for the patient; 1 item for the guardian, 7 items for the radiologist; and 6 items applied to everyone involved. The specific check list is shown in (Table 5-6). Since our country has no safety management guidelines of its own to reduce the exposed dosage caused by PET-CTs, we believe the guidelines developed through this study means great deal to the field as it is not only appropriate for domestic circumstances, but also contains specific check lists for each target who may be exposed to radiation in regards to behavior and environment.

The Character Strengths of Class Clowns

Directory of Open Access Journals (Sweden)

Willibald F. Ruch

2014-09-01

Full Text Available Class clowns traditionally were studied as a type concept and identified via sociometric procedures. In the present study a variable-centered approach was favored and class clown behaviors were studied in the context of character strengths, orientations to happiness and satisfaction with life. A sample of 672 Swiss children and adolescents filled in an 18 item self-report instrument depicting class clown behaviors. A hierarchical model of class clown behaviors was developed distinguishing a general factor and the four positively correlated dimensions of identified as a class clown, comic talent, disruptive rule-breaker, and subversive joker. Analysis of the general factor showed that class clowns were primarily male, and tended to be seen as class clowns by the teacher. Analyses of the 24 character strengths of the VIA-Youth (Park & Peterson, 2006 showed that class clowns were high in humor and leadership, and low in strengths like prudence, self-regulation, modesty, honesty, fairness, perseverance, and love of learning. An inspection of signature strengths revealed that 75% of class clowns had humor as a signature strength. Furthermore, generally class clown behaviors were shown by students indulging in a life of pleasure, but low life of engagement. The four dimensions yielded different character strengths profiles. While all dimensions of class clowns behaviors were low in temperance strengths, the factors identified as the class clown and comic talent were correlated with leadership strengths and the two negative factors (disruptive rule-breaker, subversive joker were low in other directed strengths. The disruptive rule breaking class clown was additionally low in intellectual strengths. While humor predicted life satisfaction, class clowning tended to go along with diminished satisfaction with life. It is concluded that different types of class clowns need to be kept apart and need different attention by teachers.

The character strengths of class clowns.

Science.gov (United States)

Ruch, Willibald; Platt, Tracey; Hofmann, Jennifer

2014-01-01

Class clowns traditionally were studied as a type concept and identified via sociometric procedures. In the present study a variable-centered approach was favored and class clown behaviors were studied in the context of character strengths, orientations to happiness and satisfaction with life. A sample of 672 Swiss children and adolescents filled in an 18 item self-report instrument depicting class clown behaviors. A hierarchical model of class clown behaviors was developed distinguishing a general factor and the four positively correlated dimensions of "identified as a class clown," "comic talent," "disruptive rule-breaker," and "subversive joker." Analysis of the general factor showed that class clowns were primarily male, and tended to be seen as class clowns by the teacher. Analyses of the 24 character strengths of the VIA-Youth (Park and Peterson, 2006) showed that class clowns were high in humor and leadership, and low in strengths like prudence, self-regulation, modesty, honesty, fairness, perseverance, and love of learning. An inspection of signature strengths revealed that 75% of class clowns had humor as a signature strength. Furthermore, class clown behaviors were generally shown by students indulging in a life of pleasure, but low life of engagement. The four dimensions yielded different character strengths profiles. While all dimensions of class clowns behaviors were low in temperance strengths, the factors "identified as the class clown" and "comic talent" were correlated with leadership strengths and the two negative factors ("disruptive rule-breaker," "subversive joker") were low in other directed strengths. The disruptive rule breaking class clown was additionally low in intellectual strengths. While humor predicted life satisfaction, class clowning tended to go along with diminished satisfaction with life. It is concluded that different types of class clowns need to be kept apart and need different attention by teachers.

Comparison of Domestic Safety Review and European Union(EU) Stress Test After Nuclear Accident in Fukushima Daiichi NPPs

Energy Technology Data Exchange (ETDEWEB)

Kang, Hwa Sung; Kim, Jin Weon [Chosun University, Gwangju (Korea, Republic of)

2016-05-15

The European Union(EU) nuclear regulators group established stress test criteria and procedures, and utilities performed a self-review in accordance with those criteria and procedures. For Wolsung nuclear unit-1,the stress test was additionally conducted for deciding the continued operation of NPP, even though the safety review had been conducted after Fukushima NPP accident. Thus, this study is to compares the process, criteria, and results of the safety review performed in domestic NPPs and EU stress test performed in Cernavoda NPP. From the comparisons, the effectiveness and necessity of the stress test to decide the continued operation of NPPs is discussed. and the improvement items for safety enhancement are derived. The comparison showed that the process and review criteria of EU stress test was more systematic and specific than those used in domestic NPPs. But it was indicated that the improvement items resulted from the safety review performed in domestic NPPs are more comprehensive and powerful than EU stress tests (Cernavoda NPP) results. EU stress test for Cernavoda NPP evaluated in 3 fieldsand derived 13 design change items. The 50 improvement items derived from domestic safety review were including the contents of these 13 items.

The stress and strain analysis research of class 1 eqnipments

International Nuclear Information System (INIS)

Ye Yuanwu; Tang Long; Wang Yueying; Qi Min; Yu Huajin

2008-01-01

The class 1 equipment is very important in the nuclear device, in the design and testing process required to carry out their stress and strain analysis, so as to ensure their safety. There are two ways to get stress and strain analysis of the class 1 equipment, the theoretical and experimental methods. Through theoretical method can get the stress and strain of the class 1 equipment, so as to provide a basis for the design of the equipment; through the experimental method to verify the accuracy of the theoretical methods and provide a basis for the safety assessment of the equipment. The main ressel of CEFR (China Experimental Fast Reactor) is the class 1 equipment. In this paper, according to the stress and strain analysis research of CEFR main vessel, the theories and expperimental methods of nuclear class 1 equipments stress and strain analysis has been described. (authors)

Study on the KALIMER safety approach

International Nuclear Information System (INIS)

Kim, Eui Kwang; Han, Do Hee; Kim, Young Cheol.

1997-01-01

This study describes KALIMER's safety approach, how to establish the safety criteria and temperature limit, how to define safety evaluation events, and some safety research and development needs items. It is recommended that the KALIMER's approach to safety use seven levels of safety design and a defense-in-depth design approach with particular emphasis on inherent passive features. In order to establish as set DBEs for KALIMER safety evaluation, the procedure is explained how to define safety evaluation events. Final selection is to be determined later with the final establishment of design concepts. On the basis of preliminary studies and evaluation of the plant safety related areas, the KALIMER and PRISM have following three main difference that may require special research and development for KALIMER. (author). 7 refs., 6 tabs., 6 figs

Development and validation of safety climate scales for mobile remote workers using utility/electrical workers as exemplar.

Science.gov (United States)

Huang, Yueng-Hsiang; Zohar, Dov; Robertson, Michelle M; Garabet, Angela; Murphy, Lauren A; Lee, Jin

2013-10-01

The objective of this study was to develop and test the reliability and validity of a new scale designed for measuring safety climate among mobile remote workers, using utility/electrical workers as exemplar. The new scale employs perceived safety priority as the metric of safety climate and a multi-level framework, separating the measurement of organization- and group-level safety climate items into two sub-scales. The question of the emergence of shared perceptions among remote workers was also examined. For the initial survey development, several items were adopted from a generic safety climate scale and new industry-specific items were generated based on an extensive literature review, expert judgment, 15-day field observations, and 38 in-depth individual interviews with subject matter experts (i.e., utility industry electrical workers, trainers and supervisors of electrical workers). The items were revised after 45 cognitive interviews and a pre-test with 139 additional utility/electrical workers. The revised scale was subsequently implemented with a total of 2421 workers at two large US electric utility companies (1560 participants for the pilot company and 861 for the second company). Both exploratory (EFA) and confirmatory factor analyses (CFA) were adopted to finalize the items and to ensure construct validity. Reliability of the scale was tested based on Cronbach's α. Homogeneity tests examined whether utility/electrical workers' safety climate perceptions were shared within the same supervisor group. This was followed by an analysis of the criterion-related validity, which linked the safety climate scores to self-reports of safety behavior and injury outcomes (i.e., recordable incidents, missing days due to work-related injuries, vehicle accidents, and near misses). Six dimensions (Safety pro-activity, General training, Trucks and equipment, Field orientation, Financial Investment, and Schedule flexibility) with 29 items were extracted from the EFA to

Guidelines for the technical evaluation of replacement items in nuclear power plants (NCIG-11)

International Nuclear Information System (INIS)

Craig, W.E.; Fakhar, A.A.; Shulman, M.N.

1989-12-01

This document presents guidelines and supporting information for the technical evaluation of replacement items in nuclear power plants. These guidelines contain six major sections which provide the practical knowledge and a programmatic approach to determine the technical and quality requirements necessary to generate purchase documents to procure the proper replacement items. The technical evaluation methodology includes the following steps. (1) Identification of the need for a technical evaluation. (2) Component/part functional classification procedures. (3) Performance of a Failure Modes and Effects Analysis. (4) Selection of Critical Characteristics for Design Determination. (5) Performance of a ''Like-For-Like'' or ''Alternate'' item Evaluation. (6) Preparation of the Technical and Quality Requirements Specification. Work on this document was initiated in response to the increased emphasis by the utilities owning nuclear power plants and nuclear industry on procurement of replacement items for use in safety related applications at nuclear power plants. 20 refs., 9 figs., 14 tabs

[Validation of a questionnaire to evaluate patient safety in clinical laboratories].

Science.gov (United States)

Giménez Marín, Ángeles; Rivas-Ruiz, Francisco

2012-01-01

The aim of this study was to prepare, pilot and validate a questionnaire to evaluate patient safety in the specific context of clinical laboratories. A specific questionnaire on patient safety in the laboratory, with 62 items grouped into six areas, was developed, taking into consideration the diverse human and laboratory contextual factors which may contribute to producing errors. A pilot study of 30 interviews was carried out, including validity and reliability analyses using principal components factor analysis and Cronbach's alpha. Subsequently, 240 questionnaires were sent to 21 hospitals, followed by a test-retest of 41 questionnaires with the definitive version. The sample analyzed was composed of 225 questionnaires (an overall response rate of 80%). Of the 62 items initially assessed, 17 were eliminated due to non-compliance with the criteria established before the principal components factor analysis was performed. For the 45 remaining items, 12 components were identified, with an cumulative variance of 69.5%. In seven of the 10 components with two or more items, Cronbach's alpha was higher than 0.7. The questionnaire items assessed in the test-retest were found to be stable. We present the first questionnaire with sufficiently proven validity and reliability for evaluating patient safety in the specific context of clinical laboratories. This questionnaire provides a useful instrument to perform a subsequent macrostudy of hospital clinical laboratories in Spain. The questionnaire can also be used to monitor and promote commitment to patient safety within the search for continuous quality improvement. Copyright © 2011 SESPAS. Published by Elsevier Espana. All rights reserved.

Plutonium Finishing Plant (PFP) HVAC System Component Index; FINAL

International Nuclear Information System (INIS)

DICK, J.D.

1999-01-01

This document identities the components, design media, procedures and defines the critical characteristics of Commercial Grade Items necessary to ensure the HVAC system provides these functions. This document lists safety class (SC) and safety significant (SS) components for the Heating Ventilation Air Conditioning (HVAC) and specifies the critical characteristics for Commercial Grade Items (CGI), as required by HNF-PRO-268 and HNF-PRO-1819. These are the minimum specifications that the equipment must meet in order to properly perform its safety function. There may be several manufacturers or models that meet the critical characteristics for any one item

NFC based Inspection and Qualification Management (NIQM) System Preventing Counterfeit and Fraudulent Item

International Nuclear Information System (INIS)

Chang, Choong Koo; Kim, Young Joo

2013-01-01

Design, manufacturing, fabrication, transportation and installation of the devices and equipment for nuclear power plants shall be conducted under the thorough quality assurance program for the nuclear safety. However, from late in the 1980s, NRC began to issue a number of communications alerting licenses to issues involving counterfeit and fraudulent items. A number of incidents identified by the NRC in the 1980s and 1990s catalyzed the US nuclear industry to adopt standard precautions to guard against counterfeit items. The purpose of this paper is to develop the NFC (Near Field Communication) based Inspection and Qualification Management(NIQM) system preventing counterfeit and fraudulent items. NFC is one of the latest wireless communication technologies. As a short-range wireless connectivity technology, NFC offers safe-yet simple and intuitive-communication between electronic devices. As described above, NFC technology can be applied to the inspection and qualification management system very effectively to prevent counterfeit and fraudulent items. In addition, NIQM system can use existing data and information through the interface with legacy system

NFC based Inspection and Qualification Management (NIQM) System Preventing Counterfeit and Fraudulent Item

Energy Technology Data Exchange (ETDEWEB)

Chang, Choong Koo; Kim, Young Joo [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

2013-10-15

Design, manufacturing, fabrication, transportation and installation of the devices and equipment for nuclear power plants shall be conducted under the thorough quality assurance program for the nuclear safety. However, from late in the 1980s, NRC began to issue a number of communications alerting licenses to issues involving counterfeit and fraudulent items. A number of incidents identified by the NRC in the 1980s and 1990s catalyzed the US nuclear industry to adopt standard precautions to guard against counterfeit items. The purpose of this paper is to develop the NFC (Near Field Communication) based Inspection and Qualification Management(NIQM) system preventing counterfeit and fraudulent items. NFC is one of the latest wireless communication technologies. As a short-range wireless connectivity technology, NFC offers safe-yet simple and intuitive-communication between electronic devices. As described above, NFC technology can be applied to the inspection and qualification management system very effectively to prevent counterfeit and fraudulent items. In addition, NIQM system can use existing data and information through the interface with legacy system.

Verification of Safety Margins of Battery Banks Capacity of Class 1E DC System in a Nuclear Power Plant

International Nuclear Information System (INIS)

Lukman, Abdulrauf; Zhu, Oon-Pyo

2015-01-01

According to Ref 'Station blackout (SBO) is generally a plant condition with complete loss of all alternating current (AC) power from off-site sources, from the main generator and from standby AC power sources important to safety to the essential and nonessential switchgear buses. Direct current (DC) power supplies and uninterruptible AC power supplies may be available as long as batteries can supply the loads, alternate AC power supplies are available'. The above IAEA document indicated the importance of batteries during SBO. Prior to the Fukushima accident, most batteries might be designed with coping capability of four hours. However, the accident showed the need for the coping capability to be increased to at least eight hours. The purpose of this research is to verify the safety capacity margin of the nuclear qualified battery banks of class 1E DC system and test the response to SBO using the load profile of a Korean design nuclear power plant (NPP). The capacity margins of class 1E batteries of DC power system batteries in a nuclear power plant were determined using the load profile of the plant. It was observed that if appropriate manufacturer Kt data are not available, the accuracy of the battery capacity might not be accurately calculated. The result obtained shows that the batteries have the coping capability of two hours for channel A and B, and eight hours for channel C and D. Also capacity margin as show in figure show a reasonable margin for each batteries of the DC system

Fuel safety research 2001

Energy Technology Data Exchange (ETDEWEB)

Uetsuka, Hiroshi (ed.) [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

2002-11-01

The Fuel Safety Research Laboratory is in charge of research activity which covers almost research items related to fuel safety of water reactor in JAERI. Various types of experimental and analytical researches are being conducted by using some unique facilities such as the Nuclear Safety Research Reactor (NSRR), the Japan Material Testing Reactor (JMTR), the Japan Research Reactor 3 (JRR-3) and the Reactor Fuel Examination Facility (RFEF) of JAERI. The research to confirm the safety of high burn-up fuel and MOX fuel under accident conditions is the most important item among them. The laboratory consists of following five research groups corresponding to each research fields; Research group of fuel behavior under the reactivity initiated accident conditions (RIA group). Research group of fuel behavior under the loss-of-coolant accident conditions (LOCA group). Research group of fuel behavior under the normal operation conditions (JMTR/BOCA group). Research group of fuel behavior analysis (FEMAXI group). Research group of radionuclides release and transport behavior from irradiated fuel under severe accident conditions (VEGA group). The research conducted in the year 2001 produced many important data and information. They are, for example, the fuel behavior data under BWR power oscillation conditions in the NSRR, the data on failure-bearing capability of hydrided cladding under LOCA conditions and the FP release data at very high temperature in steam which simulate the reactor core condition during severe accidents. This report summarizes the outline of research activities and major outcomes of the research executed in 2001 in the Fuel Safety Research Laboratory. (author)

The development and validation of a psychological contract of safety scale.

Science.gov (United States)

Walker, Arlene

2010-08-01

This paper builds on previous research by the author and describes the development and validation of a new measure of the psychological contract of safety. The psychological contract of safety is defined as the beliefs of individuals about reciprocal safety obligations inferred from implicit and explicit promises. A psychological contract is established when an individual believes that perceived employer and employee safety obligations are contingent on each other. A pilot test of the measure is first undertaken with participants from three different occupations: nurses, construction workers, and meat processing workers (N=99). Item analysis is used to refine the measure and provide initial validation of the scale. A larger validation study is then conducted with a participant sample of health care workers (N=424) to further refine the measure and to determine the psychometric properties of the scale. Item and correlational analyses produced the final employer and employee obligations scales, consisting of 21 and 17 items, respectively. Factor analyses identified two underlying dimensions in each scale comparable to that previously established in the organizational literature. These transactional and relational-type obligations provided construct validity of the scale. Internal consistency ratings using Cronbach's alpha found the components of the psychological contract of safety measure to be reliable. The refined and validated psychological contract of safety measure will allow investigation of the positive and negative outcomes associated with fulfilment and breach of the psychological contract of safety in future research. 2010 Elsevier Ltd. All rights reserved.

Use of seismic experience data for technical evaluation of commercial grade replacement items

International Nuclear Information System (INIS)

Cushing, R.W.; Campbell, R.D.

1991-01-01

This paper reports that the purchase of commercial grade replacement items which are dedicated for use in nuclear safety related systems requires a technical evaluation for those items which cannot be purchased as like-for-like replacements. One of the requirements for performing a technical evaluation is verification of seismic adequacy. Studying the performance and failure modes of equipment which has been subjected to strong motion earthquakes has provided the industry with the ability to predict the behavior characteristics of many types of commonly replaced components and parts. The use of Seismic Experience Data has developed into an efficient means of satisfying the seismic adequacy requirement

76 FR 68376 - Recoupment of Nonrecurring Costs (NCs) on Sales of U.S. Items

Science.gov (United States)

2011-11-04

... amended, and section 9701 of title 31, United States Code (U.S.C.), for calculating and assessing NC... section of the economy; productivity; competition; jobs; the environment; public health or safety; or....) for calculating and assessing NC recoupment charges on sales of items developed for or by the...

Differential item functioning magnitude and impact measures from item response theory models.

Science.gov (United States)

Kleinman, Marjorie; Teresi, Jeanne A

2016-01-01

Measures of magnitude and impact of differential item functioning (DIF) at the item and scale level, respectively are presented and reviewed in this paper. Most measures are based on item response theory models. Magnitude refers to item level effect sizes, whereas impact refers to differences between groups at the scale score level. Reviewed are magnitude measures based on group differences in the expected item scores and impact measures based on differences in the expected scale scores. The similarities among these indices are demonstrated. Various software packages are described that provide magnitude and impact measures, and new software presented that computes all of the available statistics conveniently in one program with explanations of their relationships to one another.

Decree of the State Office for Nuclear Safety No. 147/1997 of 17 June 1997 specifying lists of selected nuclear-related items and dual-use nuclear-related items

International Nuclear Information System (INIS)

1997-01-01

The core of the Decree consists of 2 lists, viz (a) the List of Selected Items (selected nuclear-related materials, equipment and technologies) which are subject to control regimes during imports, exports and transit; and (b) the List of Dual-Use Items (dual-use nuclear-related materials, equipment and technologies) which are subject to control regimes during imports and exports. Both Lists are based on the IAEA document INFCIRC/254/Rev.2/Part 2/Mod.1. (P.A.)

ITEM LEVEL DIAGNOSTICS AND MODEL - DATA FIT IN ITEM ...

African Journals Online (AJOL)

Global Journal

Item response theory (IRT) is a framework for modeling and analyzing item response ... data. Though, there is an argument that the evaluation of fit in IRT modeling has been ... National Council on Measurement in Education ... model data fit should be based on three types of ... prediction should be assessed through the.

Development of a patient safety climate survey for Chinese hospitals: cross-national adaptation and psychometric evaluation.

Science.gov (United States)

Zhu, Junya; Li, Liping; Zhao, Hailei; Han, Guangshu; Wu, Albert W; Weingart, Saul N

2014-10-01

Existing patient safety climate instruments, most of which have been developed in the USA, may not accurately reflect the conditions in the healthcare systems of other countries. To develop and evaluate a patient safety climate instrument for healthcare workers in Chinese hospitals. Based on a review of existing instruments, expert panel review, focus groups and cognitive interviews, we developed items relevant to patient safety climate in Chinese hospitals. The draft instrument was distributed to 1700 hospital workers from 54 units in six hospitals in five Chinese cities between July and October 2011, and 1464 completed surveys were received. We performed exploratory and confirmatory factor analyses and estimated internal consistency reliability, within-unit agreement, between-unit variation, unit-mean reliability, correlation between multi-item composites, and association between the composites and two single items of perceived safety. The final instrument included 34 items organised into nine composites: institutional commitment to safety, unit management support for safety, organisational learning, safety system, adequacy of safety arrangements, error reporting, communication and peer support, teamwork and staffing. All composites had acceptable unit-mean reliabilities (≥0.74) and within-unit agreement (Rwg ≥0.71), and exhibited significant between-unit variation with intraclass correlation coefficients ranging from 9% to 21%. Internal consistency reliabilities ranged from 0.59 to 0.88 and were ≥0.70 for eight of the nine composites. Correlations between composites ranged from 0.27 to 0.73. All composites were positively and significantly associated with the two perceived safety items. The Chinese Hospital Survey on Patient Safety Climate demonstrates adequate dimensionality, reliability and validity. The integration of qualitative and quantitative methods is essential to produce an instrument that is culturally appropriate for Chinese hospitals

SAFETY ALERT: Electrical insulation defect on safety helmets

CERN Multimedia

HSE Unit

2013-01-01

Contrarily to the information provided until 31 May 2013, some “Euro Protection” safety helmets do not respect any of the requirements for electrical insulation.   This alert concerns the safety helmets identified under the following SCEM numbers: 50.43.30.050.4 white 50.43.30.060.2 yellow 50.43.30.070.0 blue This amounts up to several hundreds of helmets on the CERN site. People who need to wear an electrically insulated safety helmet for their activities, must from now on acquire a duly insulated item to be found on the CERN store under the following SCEM numbers: 50.43.30.210.6: Petzl Vertex ST Helmet (without vent) 50.43.30.300.1: IDRA Helmet with a visor for electrical work As for the people who do not need to wear an electrically insulated helmet for their activities, they can continue working with the aforementioned helmets. For your information, please take note of the maximum use limit of each helmet: “Euro Protection” Safety Helme...

A study of software safety analysis system for safety-critical software

International Nuclear Information System (INIS)

Chang, H. S.; Shin, H. K.; Chang, Y. W.; Jung, J. C.; Kim, J. H.; Han, H. H.; Son, H. S.

2004-01-01

The core factors and requirements for the safety-critical software traced and the methodology adopted in each stage of software life cycle are presented. In concept phase, Failure Modes and Effects Analysis (FMEA) for the system has been performed. The feasibility evaluation of selected safety parameter was performed and Preliminary Hazards Analysis list was prepared using HAZOP(Hazard and Operability) technique. And the check list for management control has been produced via walk-through technique. Based on the evaluation of the check list, activities to be performed in requirement phase have been determined. In the design phase, hazard analysis has been performed to check the safety capability of the system with regard to safety software algorithm using Fault Tree Analysis (FTA). In the test phase, the test items based on FMEA have been checked for fitness guided by an accident scenario. The pressurizer low pressure trip algorithm has been selected to apply FTA method to software safety analysis as a sample. By applying CASE tool, the requirements traceability of safety critical system has been enhanced during all of software life cycle phases

Patient safety climate and worker safety behaviours in acute hospitals in Scotland.

Science.gov (United States)

Agnew, Cakil; Flin, Rhona; Mearns, Kathryn

2013-06-01

To obtain a measure of hospital safety climate from a sample of National Health Service (NHS) acute hospitals in Scotland and to test whether these scores were associated with worker safety behaviors, and patient and worker injuries. Data were from 1,866 NHS clinical staff in six Scottish acute hospitals. A Scottish Hospital Safety Questionnaire measured hospital safety climate (Hospital Survey on Patient Safety Culture), worker safety behaviors, and worker and patient injuries. The associations between the hospital safety climate scores and the outcome measures (safety behaviors, worker and patient injury rates) were examined. Hospital safety climate scores were significantly correlated with clinical workers' safety behavior and patient and worker injury measures, although the effect sizes were smaller for the latter. Regression analyses revealed that perceptions of staffing levels and managerial commitment were significant predictors for all the safety outcome measures. Both patient-specific and more generic safety climate items were found to have significant impacts on safety outcome measures. This study demonstrated the influences of different aspects of hospital safety climate on both patient and worker safety outcomes. Moreover, it has been shown that in a hospital setting, a safety climate supporting safer patient care would also help to ensure worker safety. The Scottish Hospital Safety Questionnaire has proved to be a usable method of measuring both hospital safety climate as well as patient and worker safety outcomes. Copyright © 2013 National Safety Council and Elsevier Ltd. Published by Elsevier Ltd. All rights reserved.

Nuclear power plant systems, structures and components and their safety classification

International Nuclear Information System (INIS)

2000-01-01

The assurance of a nuclear power plant's safety is based on the reliable functioning of the plant as well as on its appropriate maintenance and operation. To ensure the reliability of operation, special attention shall be paid to the design, manufacturing, commissioning and operation of the plant and its components. To control these functions the nuclear power plant is divided into structural and functional entities, i.e. systems. A systems safety class is determined by its safety significance. Safety class specifies the procedures to be employed in plant design, construction, monitoring and operation. The classification document contains all documentation related to the classification of the nuclear power plant. The principles of safety classification and the procedures pertaining to the classification document are presented in this guide. In the Appendix of the guide, examples of systems most typical of each safety class are given to clarify the safety classification principles

A Measure of EFL Public Speaking Class Anxiety: Scale Development and Preliminary Validation and Reliability

Science.gov (United States)

Yaikhong, Kriangkrai; Usaha, Siriluck

2012-01-01

The present study contributes to developing a Public Speaking Class Anxiety Scale (PSCAS) to measure anxiety in the EFL public speaking class in the Thai context. Items were adopted from previous scales: Foreign Language Classroom Anxiety Scale (FLCAS) by Horwitz et al. (1986); Personal Report of Communication Apprehension (PRCA-24) and Personal…

Analyzing Multiple-Choice Questions by Model Analysis and Item Response Curves

Science.gov (United States)

Wattanakasiwich, P.; Ananta, S.

2010-07-01

In physics education research, the main goal is to improve physics teaching so that most students understand physics conceptually and be able to apply concepts in solving problems. Therefore many multiple-choice instruments were developed to probe students' conceptual understanding in various topics. Two techniques including model analysis and item response curves were used to analyze students' responses from Force and Motion Conceptual Evaluation (FMCE). For this study FMCE data from more than 1000 students at Chiang Mai University were collected over the past three years. With model analysis, we can obtain students' alternative knowledge and the probabilities for students to use such knowledge in a range of equivalent contexts. The model analysis consists of two algorithms—concentration factor and model estimation. This paper only presents results from using the model estimation algorithm to obtain a model plot. The plot helps to identify a class model state whether it is in the misconception region or not. Item response curve (IRC) derived from item response theory is a plot between percentages of students selecting a particular choice versus their total score. Pros and cons of both techniques are compared and discussed.

Exploring differential item functioning in the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC

Directory of Open Access Journals (Sweden)

Pollard Beth

2012-12-01

Full Text Available Abstract Background The Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC is a widely used patient reported outcome in osteoarthritis. An important, but frequently overlooked, aspect of validating health outcome measures is to establish if items exhibit differential item functioning (DIF. That is, if respondents have the same underlying level of an attribute, does the item give the same score in different subgroups or is it biased towards one subgroup or another. The aim of the study was to explore DIF in the Likert format WOMAC for the first time in a UK osteoarthritis population with respect to demographic, social, clinical and psychological factors. Methods The sample comprised a community sample of 763 people with osteoarthritis who participated in the Somerset and Avon Survey of Health. The WOMAC was explored for DIF by gender, age, social deprivation, social class, employment status, distress, body mass index and clinical factors. Ordinal regression models were used to identify DIF items. Results After adjusting for age, two items were identified for the physical functioning subscale as having DIF with age identified as the DIF factor for 2 items, gender for 1 item and body mass index for 1 item. For the WOMAC pain subscale, for people with hip osteoarthritis one item was identified with age-related DIF. The impact of the DIF items rarely had a significant effect on the conclusions of group comparisons. Conclusions Overall, the WOMAC performed well with only a small number of DIF items identified. However, as DIF items were identified in for the WOMAC physical functioning subscale it would be advisable to analyse data taking into account the possible impact of the DIF items when weight, gender or especially age effects, are the focus of interest in UK-based osteoarthritis studies. Similarly for the WOMAC pain subscale in people with hip osteoarthritis it would be worthwhile to analyse data taking into account the

Evolution of a Test Item

Science.gov (United States)

Spaan, Mary

2007-01-01

This article follows the development of test items (see "Language Assessment Quarterly", Volume 3 Issue 1, pp. 71-79 for the article "Test and Item Specifications Development"), beginning with a review of test and item specifications, then proceeding to writing and editing of items, pretesting and analysis, and finally selection of an item for a…

77 FR 37477 - Federal Motor Vehicle Safety Standards; Glazing Materials

Science.gov (United States)

2012-06-21

... items of glazing are also defined according to their construction characteristics. For example, item 1... a boil and a bake test to determine whether safety glazing can withstand exposure to high... (150[emsp14][deg]F) water for three minutes and then placed in boiling water for three hours. The bake...

Trends in pharmacy staff's perception of patient safety in Swedish community pharmacies after re-regulation of conditions.

Science.gov (United States)

Kälvemark Sporrong, Sofia; Nordén-Hägg, Annika

2014-10-01

All changes in the regulation of pharmacies have an impact on the work carried out in pharmacies and also on patient safety, regardless of whether this is the intention or not. To compare staff apprehension regarding some aspects of patient safety and quality in community pharmacies prior to and after the 2009 changes in regulation of the Swedish community pharmacy market. Questionnaires targeted at pharmacy staff before and after the changes in regulation (in 2008, 2011/12, and 2012/13 respectively) used four identical items, making comparisons of some aspects possible. All four items demonstrated a significant decrease in the first survey after the changes as compared to before. In the second survey significant differences were found on the two items representing safety climate whereas the items representing team climate and management showed no significant differences. The comparison carried out in this study indicates a negative effect in Swedish community pharmacies on safety and quality issues, as experienced by pharmacy staff. It is recommended that the possible effects of healthcare reforms are assessed before implementation, in order to counteract conceivable decline in factors including patient safety and working conditions.

Assessment of patient safety culture in primary care setting, Al-Mukala, Yemen.

Science.gov (United States)

Webair, Hana H; Al-Assani, Salwa S; Al-Haddad, Reema H; Al-Shaeeb, Wafa H; Bin Selm, Manal A; Alyamani, Abdulla S

2015-10-13

Patient safety culture in primary care is the first step to achieve high quality health care. This study aims to provide a baseline assessment of patient safety culture in primary care settings in Al-Mukala, Yemen as a first published study from a least developed country. A survey was conducted in primary healthcare centres and units in Al-Mukala District, Yemen. A comprehensive sample from the available 16 centres was included. An Arabic version of the Medical Office Survey on Patient Safety Culture was distributed to all health workers (110). Participants were physicians, nurses and administrative staff. The response rate from the participating centres was 71 %. (N = 78). The percent positive responses of the items is equal to the percentage of participants who answered positively. Composite scores were calculated by averaging the percent positive response on the items within a dimension. Positive safety culture was defined as 60 % or more positive responses on items or dimensions. Patient safety culture was perceived to be generally positive with the exception of the dimensions of 'Communication openness', 'Work pressure and pace' and 'Patient care tracking/follow-up', as the percent positive response of these dimensions were 58, 57, and 52 % respectively. Overall, positive rating on quality and patient safety were low (49 and 46 % respectively). Although patient safety culture in Al-Mukala primary care setting is generally positive, patient safety and quality rating were fairly low. Implementation of a safety and quality management system in Al-Mukala primary care setting are paramount. Further research is needed to confirm the applicability of the Medical Office Survey on Patient Safety Culture (MOSPSC) for Al-Mukala primary care.

Technical Issues and Proposes on the Legislation of Probabilistic Safety Assessment in Periodic Safety Review

International Nuclear Information System (INIS)

Hwang, Seok-Won; Jeon, Ho-Jun; Na, Jang-Hwan

2015-01-01

Korean Nuclear Power Plants have performed a comprehensive safety assessment reflecting design and procedure changes and using the latest technology every 10 years. In Korea, safety factors of PSR are revised to 14 by revision of IAEA Safety Guidelines in 2003. In the revised safety guidelines, safety analysis field was subdivided into deterministic safety analysis, PSA (Probabilistic safety analysis), and hazard analysis. The purpose to examine PSA as a safety factor on PSR is to make sure that PSA results and assumptions reflect the latest state of NPPs, validate the level of computer codes and analytical models, and evaluate the adequacy of PSA instructions. In addition, its purpose is to derive the plant design change, operating experience of other plants and safety enhancement items as well. In Korea, PSA is introduced as a new factor. Thus, the overall guideline development and long-term implementation strategy are needed. Today in Korea, full-power PSA model revision and low-power and shutdown (LPSD) PSA model development is being performed as a part of the post Fukushima action items for operating plants. The scope of the full-power PSA is internal/external level 1, 2 PSA. But in case of fire PSA, the scope is level 1 PSA using new method, NUREG/CR-6850. In case of LPSD PSA, level 1 PSA for all operating plants, and level 2 PSA for 2 demonstration plants are under development. The result of the LPSD PSA will be used as major input data for plant specific SAMG (Severe Accident Management Guideline). The scope of PSA currently being developed in Korea cannot fulfill 'All Mode, All Scope' requirements recommended in the IAEA Safety Guidelines. Besides the legislation of PSA, step-by-step development strategy for non-performed scopes such as level 3 PSA and new fire PSA is one of the urgent issues in Korea. This paper suggests technical issues and development strategies for each PSA technical elements.

Assessing the Safety Attitudes Questionnaire (SAQ), German language version in Swiss university hospitals--a validation study.

Science.gov (United States)

Zimmermann, Natalie; Küng, Kaspar; Sereika, Susan M; Engberg, Sandra; Sexton, Bryan; Schwendimann, René

2013-09-10

Improving patient safety has become a major focus of clinical care and research over the past two decades. An institution's patient safety climate represents an essential component of ensuring a safe environment and thereby can be vital to the prevention of adverse events. Covering six patient safety related factors, the Safety Attitudes Questionnaire (SAQ) is a validated and widely used instrument to measure the patient safety climate in clinical areas. The objective of this study was to assess the psychometric properties of the German language version of the SAQ. A survey was carried out in two University Hospitals in Switzerland in autumn 2009 where the SAQ was distributed to a sample of 406 nurses and physicians in medical and surgical wards. Following the American Educational Research Association guidelines, we tested the questionnaire validity by levels of evidence: content validity, internal structure and relations to other variables. Confirmatory factor analysis was used to examine factor structure. Cronbach's alphas and inter-item correlations were calculated to examine internal consistency reliability. A total of 319 questionnaires were completed representing an overall response rate of 78.6%. For three items, the item content validity index was <0.75. Confirmatory factor analysis showed acceptable model fit (RMSEA = 0.045; CFI = 0.944) for the six-factor model. Additional exploratory factor analysis could not identify a better factor model. SAQ factor scores showed positive correlations with the Safety Organizing Scale (r = .56-.72). The SAQ German version showed moderate to strong internal consistency reliability indices (Cronbach alpha = .65-.83). The German language version of the SAQ demonstrated acceptable to good psychometric properties and therefore shows promise to be a sound instrument to measure patient safety climate in Swiss hospital wards. However, the low item content validity and large number of missing responses for several items suggest

Extent of awareness and prevalence of adulteration in selected food items in rural Dehradun

Directory of Open Access Journals (Sweden)

Ashok Kumar Srivastava

2016-09-01

Full Text Available Background: Adulteration of food items is common phenomenon in India. It includes both willful adulteration to improve texture and quality of food items and supply of substandard food items. The usual outcomes is outbreak of food borne illness. Aims & Objectives: i To estimate the prevalence of food adulteration in selected food items ii the awareness of subjects regarding food adulteration act and iii their buying practices. Material and Methods: Samplesize:150 households was sampled, based on prevalence of adulteration to be around 50%, with 95% confidence interval and absolute allowable error of 10%. Sample household were drawn from the selected villages randomly. Pre-designed and pretested questionnaires was administered to fulfill the objectives and food items were tested using NICE food adulteration kit. Data were analyzed by numeral with percentage, Pearson’s correlation test and F test. Results: In 59.3% households, housewives purchased the food items for the house. The prevalence of adulteration ranged from 17.3% to 66.2% in selected food items. Loose product was purchased by 54.3%. The food labels on packed items was not read by 86.3%. Mean percentage of purity was highest among literates (57.3 ±12.3 than illiterates and those having primary education. Statistically significant F ratio was seen for mean percentage of purity and respondent’s literacy status. Conclusion: Adulterant is rampant in poor strata of  society due to consumer’s illiteracy and lack of awareness towards food safety rules.

Safety classification of nuclear power plant systems, structures and components

International Nuclear Information System (INIS)

1992-01-01

The Safety Classification principles used for the systems, structures and components of a nuclear power plant are detailed in the guide. For classification, the nuclear power plant is divided into structural and operational units called systems. Every structure and component under control is included into some system. The Safety Classes are 1, 2 and 3 and the Class EYT (non-nuclear). Instructions how to assign each system, structure and component to an appropriate safety class are given in the guide. The guide applies to new nuclear power plants and to the safety classification of systems, structures and components designed for the refitting of old nuclear power plants. The classification principles and procedures applying to the classification document are also given

Preliminary safety evaluation (PSE) for Sodium Storage Facility at the Fast Flux Test Facility

International Nuclear Information System (INIS)

Bowman, B.R.

1994-01-01

This evaluation was performed for the Sodium Storage Facility (SSF) which will be constructed at the Fast Flux Test Facility (FFTF) in the area adjacent to the South and West Dump Heat Exchanger (DHX) pits. The purpose of the facility is to allow unloading the sodium from the FFTF plant tanks and piping. The significant conclusion of this Preliminary Safety Evaluation (PSE) is that the only Safety Class 2 components are the four sodium storage tanks and their foundations. The building, because of its imminent risk to the tanks under an earthquake or high winds, will be Safety Class 3/2, which means the building has a Safety Class 3 function with the Safety Class 2 loads of seismic and wind factored into the design

Social class, income, education, area of residence and psychological distress: does social class have an independent effect on psychological distress in Antalya, Turkey?

Science.gov (United States)

Belek, I

2000-02-01

The aim of this study is to determine the separate effects of social class, income, education and area of residence on psychological distress. The study also assesses whether the association between prevalence of high score on the 12-item General Health Questionnaire (GHQ 12) and social class is independent of other variables. Psychological distress was assessed by means of the GHQ 12. The study covered 1,092 adults aged 15 years or more living in two different quarters of Antalya. Social class status was defined by occupational position, with income, education and area of residence treated as confounders. Chi-square and logistic regression analyses were used to evaluate the data. Large inequalities in psychological distress by all variables were observed. Psychological distress was significantly associated with class status, after adjusting for income, education, area of residence and other potential confounders (age, sex and marital status). Class inequalities in psychological distress were observed between blue-collar workers/unqualified employees and bourgeoisie. These findings support the view that the recent widening of inequalities among social classes in Turkey pose a substantial threat to health.

Instructional Topics in Educational Measurement (ITEMS) Module: Using Automated Processes to Generate Test Items

Science.gov (United States)

Gierl, Mark J.; Lai, Hollis

2013-01-01

Changes to the design and development of our educational assessments are resulting in the unprecedented demand for a large and continuous supply of content-specific test items. One way to address this growing demand is with automatic item generation (AIG). AIG is the process of using item models to generate test items with the aid of computer…

Safety Evaluation Report Restart of K-Reactor Savannah River Site

International Nuclear Information System (INIS)

1991-10-01

In April 1991, the Department of Energy (DOE) issued DOE/DP-0084T, ''Safety Evaluation Report Restart of K-Reactor Savannah River Site.'' The Safety Evaluation Report (SER) documents the results of DOE reviews and evaluations of the programmatic aspects of a large number of issues necessary to be satisfactorily addressed before restart. The issues were evaluated for compliance with the restart criteria included in the SER. The results of those evaluations determined that the restart criteria had been satisfied for some of the issues. However, for most of the issues at least part of the applicable restart criteria had not been found to be satisfied at the time the evaluations were prepared. For those issues, open or confirmatory items were identified that required resolution. In August 1991, DOE issued DOE/DP-0090T, ''Safety Evaluation Report Restart of K-Reactor Savannah River Site Supplement 1.'' That document was the first Supplement to the April 1991 SER, and documented the resolution of 62 of the open items identified in the SER. This document is the second Supplement to the April 1991 SER. This second SER Supplement documents the resolution of additional open times identified in the SER, and includes a complete list of all remaining SER open items. The resolution of those remaining open items will be documented in future SER Supplements. Resolution of all open items for an issue indicates that its associated restart criteria have been satisfied, and that DOE concludes that the programmatic aspects of the issue have been satisfactorily addressed

A 67-Item Stress Resilience item bank showing high content validity was developed in a psychosomatic sample.

Science.gov (United States)

Obbarius, Nina; Fischer, Felix; Obbarius, Alexander; Nolte, Sandra; Liegl, Gregor; Rose, Matthias

2018-04-10

To develop the first item bank to measure Stress Resilience (SR) in clinical populations. Qualitative item development resulted in an initial pool of 131 items covering a broad theoretical SR concept. These items were tested in n=521 patients at a psychosomatic outpatient clinic. Exploratory and Confirmatory Factor Analysis (CFA), as well as other state-of-the-art item analyses and IRT were used for item evaluation and calibration of the final item bank. Out of the initial item pool of 131 items, we excluded 64 items (54 factor loading .3, 2 non-discriminative Item Response Curves, 4 Differential Item Functioning). The final set of 67 items indicated sufficient model fit in CFA and IRT analyses. Additionally, a 10-item short form with high measurement precision (SE≤.32 in a theta range between -1.8 and +1.5) was derived. Both the SR item bank and the SR short form were highly correlated with an existing static legacy tool (Connor-Davidson Resilience Scale). The final SR item bank and 10-item short form showed good psychometric properties. When further validated, they will be ready to be used within a framework of Computer-Adaptive Tests for a comprehensive assessment of the Stress-Construct. Copyright © 2018. Published by Elsevier Inc.

Workforce perceptions of hospital safety culture: development and validation of the patient safety climate in healthcare organizations survey.

Science.gov (United States)

Singer, Sara; Meterko, Mark; Baker, Laurence; Gaba, David; Falwell, Alyson; Rosen, Amy

2007-10-01

To describe the development of an instrument for assessing workforce perceptions of hospital safety culture and to assess its reliability and validity. Primary data collected between March 2004 and May 2005. Personnel from 105 U.S. hospitals completed a 38-item paper and pencil survey. We received 21,496 completed questionnaires, representing a 51 percent response rate. Based on review of existing safety climate surveys, we developed a list of key topics pertinent to maintaining a culture of safety in high-reliability organizations. We developed a draft questionnaire to address these topics and pilot tested it in four preliminary studies of hospital personnel. We modified the questionnaire based on experience and respondent feedback, and distributed the revised version to 42,249 hospital workers. We randomly divided respondents into derivation and validation samples. We applied exploratory factor analysis to responses in the derivation sample. We used those results to create scales in the validation sample, which we subjected to multitrait analysis (MTA). We identified nine constructs, three organizational factors, two unit factors, three individual factors, and one additional factor. Constructs demonstrated substantial convergent and discriminant validity in the MTA. Cronbach's alpha coefficients ranged from 0.50 to 0.89. It is possible to measure key salient features of hospital safety climate using a valid and reliable 38-item survey and appropriate hospital sample sizes. This instrument may be used in further studies to better understand the impact of safety climate on patient safety outcomes.

Teoria da Resposta ao Item Teoria de la respuesta al item Item response theory

Directory of Open Access Journals (Sweden)

Eutalia Aparecida Candido de Araujo

2009-12-01

Full Text Available A preocupação com medidas de traços psicológicos é antiga, sendo que muitos estudos e propostas de métodos foram desenvolvidos no sentido de alcançar este objetivo. Entre os trabalhos propostos, destaca-se a Teoria da Resposta ao Item (TRI que, a princípio, veio completar limitações da Teoria Clássica de Medidas, empregada em larga escala até hoje na medida de traços psicológicos. O ponto principal da TRI é que ela leva em consideração o item particularmente, sem relevar os escores totais; portanto, as conclusões não dependem apenas do teste ou questionário, mas de cada item que o compõe. Este artigo propõe-se a apresentar esta Teoria que revolucionou a teoria de medidas.La preocupación con las medidas de los rasgos psicológicos es antigua y muchos estudios y propuestas de métodos fueron desarrollados para lograr este objetivo. Entre estas propuestas de trabajo se incluye la Teoría de la Respuesta al Ítem (TRI que, en principio, vino a completar las limitaciones de la Teoría Clásica de los Tests, ampliamente utilizada hasta hoy en la medida de los rasgos psicológicos. El punto principal de la TRI es que se tiene en cuenta el punto concreto, sin relevar las puntuaciones totales; por lo tanto, los resultados no sólo dependen de la prueba o cuestionario, sino que de cada ítem que lo compone. En este artículo se propone presentar la Teoría que revolucionó la teoría de medidas.The concern with measures of psychological traits is old and many studies and proposals of methods were developed to achieve this goal. Among these proposed methods highlights the Item Response Theory (IRT that, in principle, came to complete limitations of the Classical Test Theory, which is widely used until nowadays in the measurement of psychological traits. The main point of IRT is that it takes into account the item in particular, not relieving the total scores; therefore, the findings do not only depend on the test or questionnaire

Childhood road safety behaviors in China: a cross-sectional study of Guangzhou city.

Science.gov (United States)

Yu, Jie; Zou, Nan; Liu, Yue; Fu, Lianning; Liu, Liya; Yuan, Ann

2012-01-01

This article examines traffic safety behaviors for different types of road users among children aged 0 to 17 years in Guangzhou, China. A stratified cluster sample of 7034 children from pediatric clinics (816 children aged 0-2 years who are receiving vaccines), kindergartens (1148 children aged 3-5 years), primary schools (2410 children aged 6-11 years), and secondary schools (2660 children aged 12-17 years) was collected by self-reported questionnaire surveys. The respondents were instructed to respond to each behavior question, using response choices scoring from 0 to 3. An 18-item-weighted Road Safety Behavior Index (RSBI), including 5 items for walking, 7 items for cycling, 2 items for public transport, and 4 items for private motor vehicles, was developed to quantify the child road safety behaviors and further investigate their interrelations with the sociodemographic factors among different age groups and travel categories. A higher RSBI indicates a lower risk of childhood road safety. Results from statistical analysis indicate that (1) the effects of children's sociodemographic characteristics on the RSBIs differ greatly concerning each particular travel category; and (2) RSBIs are associated more with child-related characteristics than with parent-related characteristics as the age of the children's group increases. The research findings from analyzing the self-report questionnaires were further validated with field observational records, medical records, and police records. The article concludes with some recommendations for preventing the increasing toll of road traffic injury among Chinese children, which include (1) continuing educational efforts to increase knowledge of road safety and reduce traffic risk behaviors for children and their parents; (2) creating a safe and convenient environment for walking, cycling, and public transport travelers; and (3) promoting legislation and enforcement such as the mandatory usage of bicycle helmets and child

An Agenda for Research on Work and Class in the Post-socialist World

DEFF Research Database (Denmark)

Morris, Jeremy

2017-01-01

) greater confrontation of the one-sided discourse on class in these societies and the academy itself (a class blindness of research). 2) The value in studying postsocialist societies both comparatively to Global North and South, and as an intermediate positioning for worker exploitation and responses...... in global capitalism. 3) To achieve the first two agenda items a more grounded methodological approach proceeding from the lived experience of class and work is proposed. Current research on social networks, memory studies and personhood, the informal economy, deindustrialization, and the ‘domestication...

Safety guide on fire protection in nuclear power plants

International Nuclear Information System (INIS)

1976-01-01

The purpose of the Safety Guide is to give specific design and operational guidance for protection from fire and explosion in nuclear power plants, based on the general guidance given in the relevant sections of the 'Safety Code of Practice - Design' and the 'Safety Code of Practice - Operation' of the International Atomic Energy Agency. The guide will confine itself to fire protection of safety systems and items important to safety, leaving the non-safety matters of fire protection in nuclear power plants to be decided upon the basis of the various available national and international practices and regulations. (HP) [de

Computerized Adaptive Test (CAT) Applications and Item Response Theory Models for Polytomous Items

Science.gov (United States)

Aybek, Eren Can; Demirtasli, R. Nukhet

2017-01-01

This article aims to provide a theoretical framework for computerized adaptive tests (CAT) and item response theory models for polytomous items. Besides that, it aims to introduce the simulation and live CAT software to the related researchers. Computerized adaptive test algorithm, assumptions of item response theory models, nominal response…

Language-related differential item functioning between English and German PROMIS Depression items is negligible.

Science.gov (United States)

Fischer, H Felix; Wahl, Inka; Nolte, Sandra; Liegl, Gregor; Brähler, Elmar; Löwe, Bernd; Rose, Matthias

2017-12-01

To investigate differential item functioning (DIF) of PROMIS Depression items between US and German samples we compared data from the US PROMIS calibration sample (n = 780), a German general population survey (n = 2,500) and a German clinical sample (n = 621). DIF was assessed in an ordinal logistic regression framework, with 0.02 as criterion for R 2 -change and 0.096 for Raju's non-compensatory DIF. Item parameters were initially fixed to the PROMIS Depression metric; we used plausible values to account for uncertainty in depression estimates. Only four items showed DIF. Accounting for DIF led to negligible effects for the full item bank as well as a post hoc simulated computer-adaptive test (German general population sample was considerably lower compared to the US reference value of 50. Overall, we found little evidence for language DIF between US and German samples, which could be addressed by either replacing the DIF items by items not showing DIF or by scoring the short form in German samples with the corrected item parameters reported. Copyright © 2016 John Wiley & Sons, Ltd.

Diagnostics of transparent polymer coatings of metal items

Science.gov (United States)

Varepo, L. G.; Ermakova, I. N.; Nagornova, I. V.; Kondratov, A. P.

2017-08-01

The methods of visual and instrumental express diagnostics of safety critical defects and non-uniform thickness of transparent mono- and multilayer polyolefin surface coating of metal items are analyzed in the paper. The instrumental diagnostics method relates to colorimetric measuring based on effects, which appear in the polarized light for extrusion polymer coatings. A color coordinates dependence (in the color system CIE La*b*) on both HDPE / PVC coating thickness fluctuation values (from average ones) and coating interlayer or adhesion layer delaminating is shown. A variation of color characteristics in the polarized light at a liquid penetration into delaminated polymer layers is found. Measuring parameters and critical uncertainties are defined.

26 CFR 1.167(a)-12 - Depreciation based on class lives for property first placed in service before January 1, 1971.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 2 2010-04-01 2010-04-01 false Depreciation based on class lives for property... (CONTINUED) Itemized Deductions for Individuals and Corporations § 1.167(a)-12 Depreciation based on class... section provides an elective class life system for determining the reasonable allowance for depreciation...

Latent class analysis of diagnostic science assessment data using Bayesian networks

Science.gov (United States)

Steedle, Jeffrey Thomas

2008-10-01

Diagnostic science assessments seek to draw inferences about student understanding by eliciting evidence about the mental models that underlie students' reasoning about physical systems. Measurement techniques for analyzing data from such assessments embody one of two contrasting assessment programs: learning progressions and facet-based assessments. Learning progressions assume that students have coherent theories that they apply systematically across different problem contexts. In contrast, the facet approach makes no such assumption, so students should not be expected to reason systematically across different problem contexts. A systematic comparison of these two approaches is of great practical value to assessment programs such as the National Assessment of Educational Progress as they seek to incorporate small clusters of related items in their tests for the purpose of measuring depth of understanding. This dissertation describes an investigation comparing learning progression and facet models. Data comprised student responses to small clusters of multiple-choice diagnostic science items focusing on narrow aspects of understanding of Newtonian mechanics. Latent class analysis was employed using Bayesian networks in order to model the relationship between students' science understanding and item responses. Separate models reflecting the assumptions of the learning progression and facet approaches were fit to the data. The technical qualities of inferences about student understanding resulting from the two models were compared in order to determine if either modeling approach was more appropriate. Specifically, models were compared on model-data fit, diagnostic reliability, diagnostic certainty, and predictive accuracy. In addition, the effects of test length were evaluated for both models in order to inform the number of items required to obtain adequately reliable latent class diagnoses. Lastly, changes in student understanding over time were studied with a

Selecting Items for Criterion-Referenced Tests.

Science.gov (United States)

Mellenbergh, Gideon J.; van der Linden, Wim J.

1982-01-01

Three item selection methods for criterion-referenced tests are examined: the classical theory of item difficulty and item-test correlation; the latent trait theory of item characteristic curves; and a decision-theoretic approach for optimal item selection. Item contribution to the standardized expected utility of mastery testing is discussed. (CM)

Geriatric Anxiety Scale: item response theory analysis, differential item functioning, and creation of a ten-item short form (GAS-10).

Science.gov (United States)

Mueller, Anne E; Segal, Daniel L; Gavett, Brandon; Marty, Meghan A; Yochim, Brian; June, Andrea; Coolidge, Frederick L

2015-07-01

The Geriatric Anxiety Scale (GAS; Segal et al. (Segal, D. L., June, A., Payne, M., Coolidge, F. L. and Yochim, B. (2010). Journal of Anxiety Disorders, 24, 709-714. doi:10.1016/j.janxdis.2010.05.002) is a self-report measure of anxiety that was designed to address unique issues associated with anxiety assessment in older adults. This study is the first to use item response theory (IRT) to examine the psychometric properties of a measure of anxiety in older adults. A large sample of older adults (n = 581; mean age = 72.32 years, SD = 7.64 years, range = 60 to 96 years; 64% women; 88% European American) completed the GAS. IRT properties were examined. The presence of differential item functioning (DIF) or measurement bias by age and sex was assessed, and a ten-item short form of the GAS (called the GAS-10) was created. All GAS items had discrimination parameters of 1.07 or greater. Items from the somatic subscale tended to have lower discrimination parameters than items on the cognitive or affective subscales. Two items were flagged for DIF, but the impact of the DIF was negligible. Women scored significantly higher than men on the GAS and its subscales. Participants in the young-old group (60 to 79 years old) scored significantly higher on the cognitive subscale than participants in the old-old group (80 years old and older). Results from the IRT analyses indicated that the GAS and GAS-10 have strong psychometric properties among older adults. We conclude by discussing implications and future research directions.

Asymptotic Standard Errors for Item Response Theory True Score Equating of Polytomous Items

Science.gov (United States)

Cher Wong, Cheow

2015-01-01

Building on previous works by Lord and Ogasawara for dichotomous items, this article proposes an approach to derive the asymptotic standard errors of item response theory true score equating involving polytomous items, for equivalent and nonequivalent groups of examinees. This analytical approach could be used in place of empirical methods like…

MIMIC Methods for Assessing Differential Item Functioning in Polytomous Items

Science.gov (United States)

Wang, Wen-Chung; Shih, Ching-Lin

2010-01-01

Three multiple indicators-multiple causes (MIMIC) methods, namely, the standard MIMIC method (M-ST), the MIMIC method with scale purification (M-SP), and the MIMIC method with a pure anchor (M-PA), were developed to assess differential item functioning (DIF) in polytomous items. In a series of simulations, it appeared that all three methods…

Pengendalian Persediaan Primary Items dalam Logistik Konstruksi

Directory of Open Access Journals (Sweden)

Lady Lisya

2016-09-01

Full Text Available Construction logistics are activities that consist of ordering, storage and transportation of materials of construction projects. Storage material is logistics activity that ensure the availability of materials in project site. Generally, material storage activities have been conducted at the project site. Logistics construction is aimed to support the project activities that the completion schedule has been set. Construction logistics issues is determining the schedule of ordering materials so that the project can be implemented on schedule. The purpose of research is to determine the optimum ordering period for the primary items on the main building structure construction and designing inventory control cards as a mechanism for monitoring procurement of materials. This research has been obtained optimal ordering period for the primary items of main building structure with elements of the work using Fixed Period Requirement method. Inventories were already meet the material requirement of each period. Material management has been conducted based grouping approach as many as 31 groups. In addition, this research has proposed the inventory control cards as an instrument for material procurement monitoring. The implications of inventory control cards are coordinate contracting parties with vendors to plan the replenishment  of materials to meet the work schedule. Further research can be developed with other aspects such as integrated material order system between contractors and vendors to consider the safety stock. In addition, the information system for planning material is an important consideration for construction projects with large scale so that the companies can plan primary items inventory and other materials in the projects completion more easily, quickly and accurately.

Academic Performance in Human Anatomy and Physiology Classes: A 2-Yr Study of Academic Motivation and Grade Expectation

Science.gov (United States)

Sturges, Diana; Maurer, Trent W.; Allen, Deborah; Gatch, Delena Bell; Shankar, Padmini

2016-01-01

This project used a nonexperimental design with a convenience sample and studied the relationship between academic motivation, grade expectation, and academic performance in 1,210 students enrolled in undergraduate human anatomy and physiology (HAP) classes over a 2-yr period. A 42-item survey that included 28 items of the adapted academic…

Evaluation of Northwest University, Kano Post-UTME Test Items Using Item Response Theory

Science.gov (United States)

Bichi, Ado Abdu; Hafiz, Hadiza; Bello, Samira Abdullahi

2016-01-01

High-stakes testing is used for the purposes of providing results that have important consequences. Validity is the cornerstone upon which all measurement systems are built. This study applied the Item Response Theory principles to analyse Northwest University Kano Post-UTME Economics test items. The developed fifty (50) economics test items was…

[Patient safety culture in Family practice residents of Galicia].

Science.gov (United States)

Portela Romero, Manuel; Bugarín González, Rosendo; Rodríguez Calvo, María Sol

To determine the views held by Family practice (FP) residents on the different dimensions of patient safety, in order to identify potential areas for improvement. A cross-sectional study. Seven FP of Galicia teaching units. 182 FP residents who completed the Medical Office Survey on Patient Safety Culture questionnaire. The Medical Office Survey on Patient Safety Culture questionnaire was chosen because it is translated, validated, and adapted to the Spanish model of Primary Care. The results were grouped into 12 composites assessed by the mentioned questionnaire. The study variables were the socio-demographic dimensions of the questionnaire, as well as occupational/professional variables: age, gender, year of residence, and teaching unit of FP of Galicia. The "Organisational learning" and "Teamwork" items were considered strong areas. However, the "Patient safety and quality issues", "Information exchange with other settings", and "Work pressure and pace" items were considered areas with significant potential for improvement. First-year residents obtained the best results and the fourth-year ones the worst. The results may indicate the need to include basic knowledge on patient safety in the teaching process of FP residents in order to increase and consolidate the fragile patient safety culture described in this study. Copyright © 2016 Elsevier España, S.L.U. All rights reserved.

Using Differential Item Functioning Procedures to Explore Sources of Item Difficulty and Group Performance Characteristics.

Science.gov (United States)

Scheuneman, Janice Dowd; Gerritz, Kalle

1990-01-01

Differential item functioning (DIF) methodology for revealing sources of item difficulty and performance characteristics of different groups was explored. A total of 150 Scholastic Aptitude Test items and 132 Graduate Record Examination general test items were analyzed. DIF was evaluated for males and females and Blacks and Whites. (SLD)

40 CFR 82.70 - Nonessential Class II products and exceptions.

Science.gov (United States)

2010-07-01

... provide for motor vehicle safety in accordance with Federal Motor Vehicle Safety Standards until January 1... 21 CFR 2.125(e); (ii) Lubricants, coatings or cleaning fluids for electrical or electronic equipment...; (iii) Lubricants, coatings or cleaning fluids used for aircraft maintenance, which contain class II...

Preliminary safety analysis of the HTTR-IS nuclear hydrogen production system

International Nuclear Information System (INIS)

Sato, Hiroyuki; Ohashi, Hirofumi; Tazawa, Yujiro; Tachibana, Yukio; Sakaba, Nariaki

2010-06-01

Japan Atomic Energy Agency is planning to demonstrate hydrogen production by thermochemical water-splitting IS process utilizing heat from the high-temperature gas-cooled reactor HTTR (HTTR-IS system). The previous study identified that the HTTR modification due to the coupling of hydrogen production plant requires an additional safety review since the scenario and quantitative values of the evaluation items would be altered from the original HTTR safety review. Hence, preliminary safety analyses are conducted by using the system analysis code. Calculation results showed that evaluation items such as a coolant pressure, temperatures of heat transfer tubes at the pressure boundary, etc., did not exceed allowable values. Also, the peak fuel temperature did not exceed allowable value and therefore the reactor core was not damaged and cooled sufficiently. This report compiles calculation conditions, event scenarios and the calculation results of the preliminary safety analysis. (author)

78 FR 48294 - Amendment of Class E Airspace; Mason, TX

Science.gov (United States)

2013-08-08

...-1141; Airspace Docket No. 12-ASW-12] Amendment of Class E Airspace; Mason, TX AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: This action amends Class E airspace at Mason, TX... Approach Procedures at Mason County Airport. This action enhances the safety and management of Instrument...

Item Response Data Analysis Using Stata Item Response Theory Package

Science.gov (United States)

Yang, Ji Seung; Zheng, Xiaying

2018-01-01

The purpose of this article is to introduce and review the capability and performance of the Stata item response theory (IRT) package that is available from Stata v.14, 2015. Using a simulated data set and a publicly available item response data set extracted from Programme of International Student Assessment, we review the IRT package from…

Road safety issues for bus transport management.

Science.gov (United States)

Cafiso, Salvatore; Di Graziano, Alessandro; Pappalardo, Giuseppina

2013-11-01

Because of the low percentage of crashes involving buses and the assumption that public transport improves road safety by reducing vehicular traffic, public interest in bus safety is not as great as that in the safety of other types of vehicles. It is possible that less attention is paid to the significance of crashes involving buses because the safety level of bus systems is considered to be adequate. The purpose of this study was to evaluate the knowledge and perceptions of bus managers with respect to safety issues and the potential effectiveness of various technologies in achieving higher safety standards. Bus managers were asked to give their opinions on safety issues related to drivers (training, skills, performance evaluation and behaviour), vehicles (maintenance and advanced devices) and roads (road and traffic safety issues) in response to a research survey. Kendall's algorithm was used to evaluate the level of concordance. The results showed that the majority of the proposed items were considered to have great potential for improving bus safety. The data indicated that in the experience of the participants, passenger unloading and pedestrians crossing near bus stops are the most dangerous actions with respect to vulnerable users. The final results of the investigation showed that start inhibition, automatic door opening, and the materials and internal architecture of buses were considered the items most strongly related to bus passenger safety. Brake assistance and vehicle monitoring systems were also considered to be very effective. With the exception of driver assistance systems for passenger and pedestrian safety, the perceptions of the importance of other driver assistance systems for vehicle monitoring and bus safety were not unanimous among the bus company managers who participated in this survey. The study results showed that the introduction of new technologies is perceived as an important factor in improving bus safety, but a better understanding

Correlation between safety climate and contractor safety assessment programs in construction.

Science.gov (United States)

Sparer, Emily H; Murphy, Lauren A; Taylor, Kathryn M; Dennerlein, Jack T

2013-12-01

Contractor safety assessment programs (CSAPs) measure safety performance by integrating multiple data sources together; however, the relationship between these measures of safety performance and safety climate within the construction industry is unknown. Four hundred and one construction workers employed by 68 companies on 26 sites and 11 safety managers employed by 11 companies completed brief surveys containing a nine-item safety climate scale developed for the construction industry. CSAP scores from ConstructSecure, Inc., an online CSAP database, classified these 68 companies as high or low scorers, with the median score of the sample population as the threshold. Spearman rank correlations evaluated the association between the CSAP score and the safety climate score at the individual level, as well as with various grouping methodologies. In addition, Spearman correlations evaluated the comparison between manager-assessed safety climate and worker-assessed safety climate. There were no statistically significant differences between safety climate scores reported by workers in the high and low CSAP groups. There were, at best, weak correlations between workers' safety climate scores and the company CSAP scores, with marginal statistical significance with two groupings of the data. There were also no significant differences between the manager-assessed safety climate and the worker-assessed safety climate scores. A CSAP safety performance score does not appear to capture safety climate, as measured in this study. The nature of safety climate in construction is complex, which may be reflective of the challenges in measuring safety climate within this industry. Am. J. Ind. Med. 56:1463-1472, 2013. © 2013 Wiley Periodicals, Inc. © 2013 Wiley Periodicals, Inc.

Item Banking with Embedded Standards

Science.gov (United States)

MacCann, Robert G.; Stanley, Gordon

2009-01-01

An item banking method that does not use Item Response Theory (IRT) is described. This method provides a comparable grading system across schools that would be suitable for low-stakes testing. It uses the Angoff standard-setting method to obtain item ratings that are stored with each item. An example of such a grading system is given, showing how…

Optimum Safety Levels for Breakwaters

DEFF Research Database (Denmark)

Burcharth, H. F.; Sørensen, John Dalsgaard

2005-01-01

Optimum design safety levels for rock and cube armoured rubble mound breakwaters without superstructure are investigated by numerical simulations on the basis of minimization of the total costs over the service life of the structure, taking into account typical uncertainties related to wave...... statistics and structure response. The study comprises the influence of interest rate, service lifetime, downtime costs and damage accumulation. Design limit states and safety classes for breakwaters are discussed. The results indicate that optimum safety levels are somewhat higher than the safety levels...

Undergraduate Organic Chemistry Laboratory Safety

Science.gov (United States)

Luckenbaugh, Raymond W.

1996-11-01

Each organic chemistry student should become familiar with the educational and governmental laboratory safety requirements. One method for teaching laboratory safety is to assign each student to locate safety resources for a specific class laboratory experiment. The student should obtain toxicity and hazardous information for all chemicals used or produced during the assigned experiment. For example, what is the LD50 or LC50 for each chemical? Are there any specific hazards for these chemicals, carcinogen, mutagen, teratogen, neurotixin, chronic toxin, corrosive, flammable, or explosive agent? The school's "Chemical Hygiene Plan", "Prudent Practices for Handling Hazardous Chemicals in the Laboratory" (National Academy Press), and "Laboratory Standards, Part 1910 - Occupational Safety and Health Standards" (Fed. Register 1/31/90, 55, 3227-3335) should be reviewed for laboratory safety requirements for the assigned experiment. For example, what are the procedures for safe handling of vacuum systems, if a vacuum distillation is used in the assigned experiment? The literature survey must be submitted to the laboratory instructor one week prior to the laboratory session for review and approval. The student should then give a short presentation to the class on the chemicals' toxicity and hazards and describe the safety precautions that must be followed. This procedure gives the student first-hand knowledge on how to find and evaluate information to meet laboartory safety requirements.

Safety improvements of Temelin NPP

International Nuclear Information System (INIS)

Vita, J.

2000-01-01

A detailed overview is given of the efforts made to enhance the safety level of the plant considering recommendations of a number of assessment missions. A list is presented of 10 international missions of the IAEA at the Temelin plant, covering the period 1990 to 1998. For each mission the date and objective is given, the focus of the assessment is characterized, the international participation of experts is specified, and the main conclusions of the experts is reproduced. A commented list of 60 main design changes and safety improvements is also included, as they were implemented in the wake of various safety assessments. An overview of the Temelin safety improvement programme is attached, comprising brief descriptions of 30 planned improvement items together with the time schedules. (A.K.)

P2-19: The Effect of item Repetition on Item-Context Association Depends on the Prior Exposure of Items

Directory of Open Access Journals (Sweden)

Hongmi Lee

2012-10-01

Full Text Available Previous studies have reported conflicting findings on whether item repetition has beneficial or detrimental effects on source memory. To reconcile such contradictions, we investigated whether the degree of pre-exposure of items can be a potential modulating factor. The experimental procedures spanned two consecutive days. On Day 1, participants were exposed to a set of unfamiliar faces. On Day 2, the same faces presented on the previous day were used again in half of the participants, whereas novel faces were used for the other half. Day 2 procedures consisted of three successive phases: item repetition, source association, and source memory test. In the item repetition phase, half of the face stimuli were repeatedly presented while participants were making male/female judgments. During the source association phase, both the repeated and the unrepeated faces appeared in one of the four locations on the screen. Finally, participants were tested on the location in which a given face was presented during the previous phase and reported the confidence of their memory. Source memory accuracy was measured as the percentage of correct non-guess trials. As results, we found a significant interaction between prior exposure and repetition. Repetition impaired source memory when the items had been pre-exposed on Day 1, while it led to greater accuracy in novel ones. These results show that pre-experimental exposure can modulate the effects of repetition on associative binding between an item and its contextual information, suggesting that pre-existing representation and novelty signal interact to form new episodic memory.

Enhancement of Nuclear Safety in Korea: A Regulatory Perspective

International Nuclear Information System (INIS)

Chung, K.Y.

2016-01-01

In the aftermath of Fukushima Daiichi accident in 2011 Korean regulatory body immediately performed special inspections on nuclear power plants (NPPs) and a research reactor in Korea, and issued an enforcement order for the licensees to implement fifty Fukushima action items to address the safety issues identified by the inspections. Subsequently, the licensees have established the implementation plans for resolution of the action items. By the implementation of the action items, the possibility of severe accident due to the extreme hazards has been greatly reduced and the capabilities to mitigate the severe accident, should it occur, have been upgraded. To improve the consistency and predictability of the regulation on severe accidents, Nuclear Safety and Security Commission (NSSC) the regulatory body in Korea, is revising the regulatory framework for severe accidents. The new framework will require the licensee to enhance the capabilities for prevention and mitigation of severe accidents in view of the defence in depth principle, to assess the radiological effects from the severe accidents, and to improve current accident management procedures and guidelines necessary for the prevention and mitigation of severe accidents. This rulemaking also considers the safety principles provided by the IAEA Vienna Declaration in 2015, which require new NPPs to prevent large radioactive releases. (author)

The second periodic safety review report of Tokai Reprocessing Plant [JAEA-Technology--2016-007-PT1

International Nuclear Information System (INIS)

Shirai, Nobutoshi; Miura, Yasushi; Tachibana, Ikuya; Omori, Satoru; Wake, Junichi; Fukuda, Kazuhito; Nakano, Takafumi; Nagasato, Yoshihiko

2016-07-01

The periodic safety review of Tokai Reprocessing Plant (TRP) is an activity to confirm the application of the safety activity implementation and to give effective additional measures for the facility safety and the improvement of its reliability. We implemented 4 items as follows; (1) evaluation of safety activity implementation, (2) evaluation of status of safety activities reflecting the latest technical knowledges, (3) technical evaluation about aging degradation, and (4) planning measures about a 10-years-plan that the operator shall implement in order to keep the facility condition. We summarized this report as the result of research and evaluation of above 4 items as the second periodic safety review at TRP. About (1), we researched about the 8 items that are QA activities, operation management, maintenance management, etc. We confirmed the result that we are adequately expanding its safety activities by preparing the necessary documents and schemes, and so on. About (2), we researched them in view point of safety research results and technology development results and confirmed that we reflect latest knowledges into our facility and make efforts for improvement of safety and reliability. About (3), we can keep the safety of the facilities important to safety and the sea discharge line, under assumption of the present maintenance till the next aging evaluation, because no 'focuses for aging degradation' exist which we cannot deny the gap between the initial prediction and actual condition, by measurements and technical view. About (4), by the technical results of aging degradation evaluation, we found no additional safety plans into maintenance strategies. (author)

Assessing the safety attitudes questionnaire (SAQ), German language version in Swiss university hospitals - a validation study

Science.gov (United States)

2013-01-01

Background Improving patient safety has become a major focus of clinical care and research over the past two decades. An institution’s patient safety climate represents an essential component of ensuring a safe environment and thereby can be vital to the prevention of adverse events. Covering six patient safety related factors, the Safety Attitudes Questionnaire (SAQ) is a validated and widely used instrument to measure the patient safety climate in clinical areas. The objective of this study was to assess the psychometric properties of the German language version of the SAQ. Methods A survey was carried out in two University Hospitals in Switzerland in autumn 2009 where the SAQ was distributed to a sample of 406 nurses and physicians in medical and surgical wards. Following the American Educational Research Association guidelines, we tested the questionnaire validity by levels of evidence: content validity, internal structure and relations to other variables. Confirmatory factor analysis was used to examine factor structure. Cronbach’s alphas and inter-item correlations were calculated to examine internal consistency reliability. Results A total of 319 questionnaires were completed representing an overall response rate of 78.6%. For three items, the item content validity index was <0.75. Confirmatory factor analysis showed acceptable model fit (RMSEA = 0.045; CFI = 0.944) for the six-factor model. Additional exploratory factor analysis could not identify a better factor model. SAQ factor scores showed positive correlations with the Safety Organizing Scale (r = .56 - .72). The SAQ German version showed moderate to strong internal consistency reliability indices (Cronbach alpha = .65 - .83). Conclusions The German language version of the SAQ demonstrated acceptable to good psychometric properties and therefore shows promise to be a sound instrument to measure patient safety climate in Swiss hospital wards. However, the low item content validity and large number

Integration of radiation and physical safety in large radiator facilities

International Nuclear Information System (INIS)

Lima, P.P.M.; Benedito, A.M.; Lima, C.M.A.; Silva, F.C.A. da

2017-01-01

Growing international concern about radioactive sources after the Sept. 11, 2001 event has led to a strengthening of physical safety. There is evidence that the illicit use of radioactive sources is a real possibility and may result in harmful radiological consequences for the population and the environment. In Brazil there are about 2000 medical, industrial and research facilities with radioactive sources, of which 400 are Category 1 and 2 classified by the - International Atomic Energy Agency - AIEA, where large irradiators occupy a prominent position due to the very high cobalt-60 activities. The radiological safety is well established in these facilities, due to the intense work of the authorities in the Country. In the paper the main aspects on radiological and physical safety applied in the large radiators are presented, in order to integrate both concepts for the benefit of the safety as a whole. The research showed that the items related to radiation safety are well defined, for example, the tests on the access control devices to the irradiation room. On the other hand, items related to physical security, such as effective control of access to the company, use of safety cameras throughout the company, are not yet fully incorporated. Integration of radiation and physical safety is fundamental for total safety. The elaboration of a Brazilian regulation on the subject is of extreme importance

International movement on radiation safety related to the ICRP and the IAEA-RADWASS

International Nuclear Information System (INIS)

Kosako, Toshiso

1994-01-01

Nowadays discussion on Radiation Safety has a spread of world wide range. The main framework on radiation safety was constructed by ICRP (International Commission on Radiological Protection), which was established in 1928. This term of the committee was from June 1993 to May 1997 and the first plenary meeting was held at the Queen's hotel in Bournemouth of the United Kingdom on September 1993. The outline of this meeting, especially related items to the Committee 4, were summarized in this paper. The second point of our workshop considerations is radioactive waste problems, which are now under discussion in RADWASS (Radioactive Waste Safety Standards) project of IAEA (International Atomic Energy Agency). This IAEA-RADWASS will last nearly 10 years to cover whole subjects. These discussed items are arranged into various international standards; the safety fundamental, the safety standards, the safety guides and the safety practices. These systematic approach, if we could summarize, would be effective not only to the specialists but also to a general public to get an acceptance of radioactive waste problem. Here, this IAEA-RADWASS project is reviewed. (author)

75 FR 53876 - Proposed Establishment of Class E Airspace; Berryville, AR

Science.gov (United States)

2010-09-02

... Class E Airspace; Berryville, AR AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). SUMMARY: This action proposes to establish Class E airspace at Berryville, AR... SIAPs operations at Carroll County Airport, Berryville, AR. Controlled airspace is needed for the safety...

AERB information booklet: personal protective equipment- safety footwear

International Nuclear Information System (INIS)

1992-01-01

The main classes of safety footwear required for industrial operations in the units of Department of Atomic Energy are the following; leather safety boots and shoes, firemen's leather boots - Wellington type, electrical safety shoes, chemical safety shoes, shoes suitable for mining operations. The criteria to be adopted for selection of safety shoes for nuclear installations are given. (M.K.V.). 5 annexures, 1 appendix

The Use of Theatre Tours in Road Safety Education.

Science.gov (United States)

Powney, Janet; And Others

The Scottish Road Safety Campaign and the Road Safety Council of Wales have made a large investment in theater tours as a method of providing road safety education. This study aimed to evaluate the effectiveness of a road safety message delivered by a theater group, Road Safety Officers (RSOs), or, teachers for pupils in upper secondary classes.…

Job Satisfaction among Health-Care Staff in Township Health Centers in Rural China: Results from a Latent Class Analysis

Directory of Open Access Journals (Sweden)

Haipeng Wang

2017-09-01

Full Text Available Background: The lower job satisfaction of health-care staff will lead to more brain drain, worse work performance, and poorer health-care outcomes. The aim of this study was to identify patterns of job satisfaction among health-care staff in rural China, and to investigate the association between the latent clusters and health-care staff’s personal and professional features; Methods: We selected 12 items of five-point Likert scale questions to measure job satisfaction. A latent-class analysis was performed to identify subgroups based on the items of job satisfaction; Results: Four latent classes of job satisfaction were identified: 8.9% had high job satisfaction, belonging to “satisfied class”; 38.2% had low job satisfaction, named as “unsatisfied class”; 30.5% were categorized into “unsatisfied class with the exception of interpersonal relationships”; 22.4% were identified as “pseudo-satisfied class”, only satisfied with management-oriented items. Low job satisfaction was associated with specialty, training opportunity, and income inequality. Conclusions: The minority of health-care staff belong to the “satisfied class”. Three among four subgroups are not satisfied with income, benefit, training, and career development. Targeting policy interventions should be implemented to improve the items of job satisfaction based on the patterns and health-care staff’s features.

Evaluation on safety issues of SMART

International Nuclear Information System (INIS)

Kim, W. S.; Seol, K. W.; Yoon, Y. K.; Lee, J. H.

2001-01-01

Safety issues on the SMART were evaluated in the light of the compliance with the Ministerial Ordinance of Technical Requirements applying to Nuclear Installations, which was recently revised. Evaluation concludes that regulatory requirements associated with following items have to be developed as the licensing criteria for the SMART: (1) proving the safety of design or materials different form existing reactors; (2) coping with beyond design basis accidents; (3) rulemaking on the safety of reactor safeguard vessel ; (4) ensuring integrity of steam generator tubes; and (5) classifying equipment based on their safety significance. Appropriate actions including implementation of new requirements under development should be taken for safety issues such as diversity of reactivity control and in-service inspection of steam generator tubes that are not complied with the current Technical Requirements. Safety level of the SMART design will be evaluated further by the more detailed assessment according to the Technical Requirements, and additional safety issues will be identified and resolved, if it necessary

76 FR 53359 - Proposed Establishment of Class E Airspace; Nashville, AR

Science.gov (United States)

2011-08-26

...-0497; Airspace Docket No. 11-ASW-4] Proposed Establishment of Class E Airspace; Nashville, AR AGENCY... action proposes to establish Class E airspace at Nashville, AR. Controlled airspace is necessary to... approach procedures at Howard County Airport, Nashville, AR. Controlled airspace is needed for the safety...

77 FR 16783 - Proposed Amendment of Class E Airspace; Orlando, FL

Science.gov (United States)

2012-03-22

...-0503; Airspace Docket No. 11-ASO-19] Proposed Amendment of Class E Airspace; Orlando, FL AGENCY... action proposes to amend Class E Airspace at Orlando, FL, as new Standard Instrument Approach Procedures have been developed at Orlando Executive Airport. This action would enhance the safety and airspace...

The issues that class teachers encounter during application of science and technology teaching curriculum

Directory of Open Access Journals (Sweden)

Mustafa Ugras

2014-08-01

Full Text Available This study aimed at investigating the challenges class teachers face in the curriculum implementation and whether these challenges differ in relation to teachers’ gender, level of education, department they graduated from and teaching experience. For this purpose; a questionnaire was developed by the researcher. Items of the questionnaire were selected from the related literature and validated by a group of expert in the field. A pilot study was conducted to assess the clarity of the questionnaire items. The internal reliability of the final version of questionnaire was calculated by using Cronbach’s Alpha Formula and found be high (α=0.85. The participants of this research included 342 class teachers who were teaching 4th and 5th class in 57 different elementary schools in 2010-2011 academic years in Bingol and Diayrbakir cities. The results of the survey were considered by using SPSS packet program. In the analyzing of data obtained from this study, frequency, arithmetic average, t-test and variance analysis were used. From the obtained data, it was determined that the 4th and 5th class teachers encounter different problems in science and technology teaching program, especially in performance homework, sourcing and lesson time topics.

The predictive validity of safety climate.

Science.gov (United States)

Johnson, Stephen E

2007-01-01

Safety professionals have increasingly turned their attention to social science for insight into the causation of industrial accidents. One social construct, safety climate, has been examined by several researchers [Cooper, M. D., & Phillips, R. A. (2004). Exploratory analysis of the safety climate and safety behavior relationship. Journal of Safety Research, 35(5), 497-512; Gillen, M., Baltz, D., Gassel, M., Kirsch, L., & Vacarro, D. (2002). Perceived safety climate, job Demands, and coworker support among union and nonunion injured construction workers. Journal of Safety Research, 33(1), 33-51; Neal, A., & Griffin, M. A. (2002). Safety climate and safety behaviour. Australian Journal of Management, 27, 66-76; Zohar, D. (2000). A group-level model of safety climate: Testing the effect of group climate on microaccidents in manufacturing jobs. Journal of Applied Psychology, 85(4), 587-596; Zohar, D., & Luria, G. (2005). A multilevel model of safety climate: Cross-level relationships between organization and group-level climates. Journal of Applied Psychology, 90(4), 616-628] who have documented its importance as a factor explaining the variation of safety-related outcomes (e.g., behavior, accidents). Researchers have developed instruments for measuring safety climate and have established some degree of psychometric reliability and validity. The problem, however, is that predictive validity has not been firmly established, which reduces the credibility of safety climate as a meaningful social construct. The research described in this article addresses this problem and provides additional support for safety climate as a viable construct and as a predictive indicator of safety-related outcomes. This study used 292 employees at three locations of a heavy manufacturing organization to complete the 16 item Zohar Safety Climate Questionnaire (ZSCQ) [Zohar, D., & Luria, G. (2005). A multilevel model of safety climate: Cross-level relationships between organization and group

Adaption and validation of the Safety Attitudes Questionnaire for the Danish hospital setting

DEFF Research Database (Denmark)

Kristensen, Solvejg; Sabroe, Svend; Bartels, Paul

2015-01-01

PURPOSE: Measuring and developing a safe culture in health care is a focus point in creating highly reliable organizations being successful in avoiding patient safety incidents where these could normally be expected. Questionnaires can be used to capture a snapshot of an employee's perceptions...... of patient safety culture. A commonly used instrument to measure safety climate is the Safety Attitudes Questionnaire (SAQ). The purpose of this study was to adapt the SAQ for use in Danish hospitals, assess its construct validity and reliability, and present benchmark data. MATERIALS AND METHODS: The SAQ...... tested in a cross-sectional study. Goodness-of-fit indices from confirmatory factor analysis were reported along with inter-item correlations, Cronbach's alpha (α), and item and subscale scores. RESULTS: Participation was 73.2% (N=925) of invited health care workers. Goodness-of-fit indices from...

Methodology and Practical Tools for Enhancing an Accounting/Business Ethics Class

Science.gov (United States)

Kreissl, Laura Jean; Upshaw, Alice

2012-01-01

While many articles have argued the value and impact of ethics courses, few have discussed methodology and particularly the tools used in the implementation of accounting ethics classes. We address both of those items in this paper in hopes of helping other instructors in building or strengthening their courses. This paper describes the…

Seismic and environmental qualification of class IE equipment manufactured in Spain

International Nuclear Information System (INIS)

Gerini, P.; Lumbreras, A.; Naredo, F.

1978-01-01

Nuclear power plant instrumentation and control design is affected by several factors such as various plant operating conditions, transient response capability, safety requirements and changes in IEEE standards. Recent upgraded IEEE standards that call for Qualification of all Safety related I anc C equipment, namely IEEE 323 (Qualifying Class IE Electric Equipment for nuclear power generating stations) and its daughter Standard IEEE 344 (Recommended Practices for Seismic Qualification of Class IE Equipment for nuclear power generating stations) have been endorsed by the United States Nuclear Regulatory Commission through the issuance of corresponding Regulatory Guides. The author describes the Qualification requirements applicable to the Class IE I and C Components made in Spain for the different vintages of plants, and the programs implemented or plans established by Westinghouse to fulfill those requirements. (author)

World class manufacturing in metallurgical enterprise

OpenAIRE

B. Gajdzik

2013-01-01

World Class Manufacturing (WCM) assumes increase of efficiency of the company by elimination of all the losses, wastage and dangers of safety. In ArcelorMittal the concept of WCM is implemented in particular enterprises within the capital group. In this publication the activities conducted in some of those enterprises are described.

The Technical Quality of Test Items Generated Using a Systematic Approach to Item Writing.

Science.gov (United States)

Siskind, Theresa G.; Anderson, Lorin W.

The study was designed to examine the similarity of response options generated by different item writers using a systematic approach to item writing. The similarity of response options to student responses for the same item stems presented in an open-ended format was also examined. A non-systematic (subject matter expertise) approach and a…

75 FR 6592 - Proposed Amendment of Class E Airspace; Emmetsburg, IA

Science.gov (United States)

2010-02-10

...-1153; Airspace Docket No. 09-ACE-13] Proposed Amendment of Class E Airspace; Emmetsburg, IA AGENCY... action proposes to amend Class E airspace at Emmetsburg, IA. Additional controlled airspace is necessary..., Emmetsburg, IA. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules...

76 FR 3571 - Proposed Establishment of Class E Airspace; Kahului, HI

Science.gov (United States)

2011-01-20

...-1233; Airspace Docket No. 10-AWP-21] Proposed Establishment of Class E Airspace; Kahului, HI AGENCY... action proposes to establish Class E airspace at Kahului Airport, Kahului, HI. Controlled airspace is... procedures at Kahului Airport, Kahului, HI. The FAA is proposing this action to enhance the safety and...

75 FR 6594 - Proposed Amendment of Class E Airspace; Osceola, AR

Science.gov (United States)

2010-02-10

...-1183; Airspace Docket No. 09-ASW-38] Proposed Amendment of Class E Airspace; Osceola, AR AGENCY... action proposes to amend Class E airspace at Osceola, AR. Decommissioning of the Osceola non-directional beacon (NDB) at Osceola Municipal Airport, Osceola, AR, has made this action necessary for the safety and...

Adjustment of the Brazilian radioprotection standards to the safety principles of the International Atomic Energy Agency

International Nuclear Information System (INIS)

Pereira, Wagner de S.; Py Junior, Delcy de A.

2013-01-01

The International Atomic Energy Agency (IAEA) has a recommendation with 10 basic safety principles (Fundamental Safety Principles Safety Fundamentals series, number SF-1), which are: 1) Responsibility for safety; 2) Role for government; 3) Leadership and management for safety; 4) Justification of facilities and activities; 5) Optimization of protection; 6) Limitation of risk to individuals; 7) Protection of present and futures generations; 8) Prevention of accidents; 9) Emergency preparedness and response and 10) Protection actions to reduce existing or unregulated radiations risk. The aim of this study is to verify that the Brazilian standards of radiation protection meet the principles described above and how well suited to them. The analysis of the national radiation protection regulatory system, developed and deployed by the National Nuclear Energy Commission (CNEN), showed that out of the ten items, two are covered partially, the number 2 and 10. The others are fully met. The item 2 the fact that the regulatory body (CNEN) be stock controller of a large company in the sector put in check its independence as a regulatory body. In item 10 the Brazilian standard of radiation protection does not provide explicit resolution of environmental liabilities

VFR Class B Graphics - Aeronautical Information Services Digital Products

Data.gov (United States)

Department of Transportation — These graphics are designed to increase safety and aid pilots in gaining situational awareness within existing and redesigned Class B areas. The graphic provides an...

Development of a methodology for safety classification on a non-reactor nuclear facility illustrated using an specific example

International Nuclear Information System (INIS)

Scheuermann, F.; Lehradt, O.; Traichel, A.

2015-01-01

To realize the safety of personnel and environment systems and components of nuclear facilities are classified according to their potential danger into safety classes. Based on this classification different demands on the manufacturing quality result. The objective of this work is to present the standardized method developed by NUKEM Technologies Engineering Services for the categorization into the safety classes restricted to Non-reactor nuclear facilities (NRNF). Exemplary the methodology is used on the complex Russian normative system (four safety classes). For NRNF only the lower two safety classes are relevant. The classification into the lowest safety class 4 is accordingly if the maximum resulting dose following from clean-up actions in case of incidents/accidents remains below 20 mSv and the volume activity restrictions of set in NRB-99/2009 are met. The methodology is illustrated using an example. In short the methodology consists of: - Determination of the working time to remove consequences of incidents, - Calculation of the dose resulting from direct radiation and due to inhalation during these works. The application of this methodology avoids over-conservative approaches. As a result some previously higher classified equipment can be classified into the lower safety class.

Safety Education in the Elementary School. Fastback 170.

Science.gov (United States)

Wayne, Joseph E.

This pamphlet deals with incorporating effective safety education programs into the elementary school curriculum. Covered in a discussion of the scope and nature of the safety problem are classes of accidents (motor vehicle, home, work, and public accidents) and causes of accidents. Various functions of safety education in elementary schools are…

Development and Pilot Implementation of a Search Protocol to Improve Patient Safety on a Psychiatric Inpatient Unit.

Science.gov (United States)

Abela-Dimech, Frances; Johnston, Kim; Strudwick, Gillian

A mental health organization in Ontario, Canada, noted an increase in unsafe items entering locked inpatient units. The purpose of this project was to develop and implement a search protocol to improve patient, staff, and visitor safety by preventing unsafe items from entering a locked inpatient unit. Under the guidance of a clinical nurse specialist, an interprofessional team used the Failure Mode and Effects Analysis framework to identify what items were considered unsafe, how these unsafe items were entering the unit, and what strategies could be used to prevent these items from entering the unit. A standardized search protocol was identified as a strategy to prevent items from entering the unit. The standardized search protocol was developed and piloted on 1 unit. To support the search protocol, an interprofessional team created a poster using a mnemonic aid to educate patients, staff, and visitors about which items could not be brought onto the unit. Educational sessions on the search protocol were provided for staff. The difference between the number of incidents before and after the implementation of the search protocol was statistically significant. Safety on an inpatient unit was increased as incidents of unsafe items entering the unit decreased.

Standardization of Safety Checklists for Sport Fields in Schools

Directory of Open Access Journals (Sweden)

S. Arghami

2015-01-01

Full Text Available Introduction: Nowadays in all human societies, sport is considered as a human-training matter, which often occurs in sport fields. Many people, including students in schools, occasionally deal with these fields. Therefore, a standard tool is required to frequently inspection of sport fields. The aim of this study was to standardize checklists for sport fields in schools. .Material and Method: This study is a kind of tool and technique evaluation was done in Zanjan in 2013. The studied population included indoor and outdoor sport fields in governmental boys’ high schools in Zanjan city. The checklists’ items selected based on existing regulations, standards and relevant studies. Standardization of all tools was done applying the face and content validity and reliability tests. .Result: The primary checklist for outdoor sport fields in high schools, which considered by the expert panel, consisted of 75 items. Based on CVI (2 to 3.9 and CVR (.5 to .78, modifications were done and 6 more items were added. And the same process for the primary checklist for outdoor sports fields (85 items was repeated. Based on CVI (2 to 3.9 and CVR (.5 to .78, items increased to 92.  .Conclusion: The safety checklist for sport fields in schools are matched with the properties of them. The safety checklist developed in this study has an acceptable reliability and validity for useful applying in sport field inspections.

Generalizability theory and item response theory

NARCIS (Netherlands)

Glas, Cornelis A.W.; Eggen, T.J.H.M.; Veldkamp, B.P.

2012-01-01

Item response theory is usually applied to items with a selected-response format, such as multiple choice items, whereas generalizability theory is usually applied to constructed-response tasks assessed by raters. However, in many situations, raters may use rating scales consisting of items with a

76 FR 53353 - Proposed Amendment of Class E Airspace; Carroll, IA

Science.gov (United States)

2011-08-26

...-0845; Airspace Docket No. 11-ACE-19] Proposed Amendment of Class E Airspace; Carroll, IA AGENCY... action proposes to amend Class E airspace at Carroll, IA. Decommissioning of the Carroll non-directional beacon (NDB) at Arthur N. Neu Airport, Carroll, IA, has made this action necessary for the safety and...

75 FR 6595 - Proposed Amendment of Class E Airspace; Mapleton, IA

Science.gov (United States)

2010-02-10

...-1155; Airspace Docket No. 09-ACE-14] Proposed Amendment of Class E Airspace; Mapleton, IA AGENCY... action proposes to amend Class E airspace at Mapleton, IA. Additional controlled airspace is necessary to..., Mapleton, IA. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules...

76 FR 66870 - Proposed Amendment of Class E Airspace; Rugby, ND

Science.gov (United States)

2011-10-28

...-0433; Airspace Docket No. 11-AGL-12] Proposed Amendment of Class E Airspace; Rugby, ND AGENCY: Federal... proposes to amend Class E airspace at Rugby, ND. Decommissioning of the Rugby non-directional beacon (NDB) at Rugby Municipal Airport, Rugby, ND, has made this action necessary for the safety and management...

75 FR 43884 - Proposed Amendment of Class E Airspace; Searcy, AR

Science.gov (United States)

2010-07-27

...-1182; Airspace Docket No. 09-ASW-37] Proposed Amendment of Class E Airspace; Searcy, AR AGENCY: Federal... proposes to amend Class E airspace at Searcy, AR. Decommissioning of the Searcy non-directional beacon (NDB) at Searcy Municipal Airport, Searcy, AR, has made this action necessary for the safety and management...

Sharing the cost of redundant items

DEFF Research Database (Denmark)

Hougaard, Jens Leth; Moulin, Hervé

2014-01-01

We ask how to share the cost of finitely many public goods (items) among users with different needs: some smaller subsets of items are enough to serve the needs of each user, yet the cost of all items must be covered, even if this entails inefficiently paying for redundant items. Typical examples...... are network connectivity problems when an existing (possibly inefficient) network must be maintained. We axiomatize a family cost ratios based on simple liability indices, one for each agent and for each item, measuring the relative worth of this item across agents, and generating cost allocation rules...... additive in costs....

Plutonium finishing plant safety systems and equipment list

International Nuclear Information System (INIS)

Bergquist, G.G.

1995-01-01

The Safety Equipment List (SEL) supports Analysis Report (FSAR), WHC-SD-CP-SAR-021 and the Plutonium Finishing Plant Operational Safety Requirements (OSRs), WHC-SD-CP-OSR-010. The SEL is a breakdown and classification of all Safety Class 1, 2, and 3 equipment, components, or system at the Plutonium Finishing Plant complex

Safety functions and component classification for BWR, PWR and PTR

International Nuclear Information System (INIS)

1979-01-01

The Safety Guide forms part of the IAEA programme, referred to as the NUSS programme (Nuclear Safety Standards), for establishing Codes of Practice and Safety Guides relating to thermal neutron power plants. The present Safety Guide has the following chapters: safety functions, ranking of safety functions, assignment of safety class requirements. Design requirements for structural integrity of boundaries of fluid-retaining components are also discussed

Software Quality Assurance for Nuclear Safety Systems

International Nuclear Information System (INIS)

Sparkman, D R; Lagdon, R

2004-01-01

-critical software and applies the highest level of rigor for those systems. DOE has further defined a risk approach to nuclear safety system software consistent with the analyses required for operation of nuclear facilities. This requires the grading of software in terms of safety class and safety significant structures, systems and components (SSCs). Safety-class SSCs are related to public safety where as safety-significant SSCs are identified for specific aspects of defense-in-depth and worker safety. Industry standards do not directly categorize nuclear safety software and DOE sites are not consistent in their approach to nuclear safety software quality assurance. DOE is establishing a more detailed graded approach for software associated with safety class and safety significant systems. This paper presents the process and results that DOE utilized to develop a detailed classification scheme for nuclear safety software

Dissociating the neural correlates of intra-item and inter-item working-memory binding.

Directory of Open Access Journals (Sweden)

Carinne Piekema

Full Text Available BACKGROUND: Integration of information streams into a unitary representation is an important task of our cognitive system. Within working memory, the medial temporal lobe (MTL has been conceptually linked to the maintenance of bound representations. In a previous fMRI study, we have shown that the MTL is indeed more active during working-memory maintenance of spatial associations as compared to non-spatial associations or single items. There are two explanations for this result, the mere presence of the spatial component activates the MTL, or the MTL is recruited to bind associations between neurally non-overlapping representations. METHODOLOGY/PRINCIPAL FINDINGS: The current fMRI study investigates this issue further by directly comparing intrinsic intra-item binding (object/colour, extrinsic intra-item binding (object/location, and inter-item binding (object/object. The three binding conditions resulted in differential activation of brain regions. Specifically, we show that the MTL is important for establishing extrinsic intra-item associations and inter-item associations, in line with the notion that binding of information processed in different brain regions depends on the MTL. CONCLUSIONS/SIGNIFICANCE: Our findings indicate that different forms of working-memory binding rely on specific neural structures. In addition, these results extend previous reports indicating that the MTL is implicated in working-memory maintenance, challenging the classic distinction between short-term and long-term memory systems.

Generalizability theory and item response theory

OpenAIRE

Glas, Cornelis A.W.; Eggen, T.J.H.M.; Veldkamp, B.P.

2012-01-01

Item response theory is usually applied to items with a selected-response format, such as multiple choice items, whereas generalizability theory is usually applied to constructed-response tasks assessed by raters. However, in many situations, raters may use rating scales consisting of items with a selected-response format. This chapter presents a short overview of how item response theory and generalizability theory were integrated to model such assessments. Further, the precision of the esti...

26 CFR 1.187-1 - Amortization of certain coal mine safety equipment.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 3 2010-04-01 2010-04-01 false Amortization of certain coal mine safety... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Itemized Deductions for Individuals and Corporations (continued) § 1.187-1 Amortization of certain coal mine safety equipment. (a) Allowance of deduction—(1) In...

The 12-item World Health Organization Disability Assessment Schedule II (WHO-DAS II: a nonparametric item response analysis

Directory of Open Access Journals (Sweden)

Fernandez Ana

2010-05-01

Full Text Available Abstract Background Previous studies have analyzed the psychometric properties of the World Health Organization Disability Assessment Schedule II (WHO-DAS II using classical omnibus measures of scale quality. These analyses are sample dependent and do not model item responses as a function of the underlying trait level. The main objective of this study was to examine the effectiveness of the WHO-DAS II items and their options in discriminating between changes in the underlying disability level by means of item response analyses. We also explored differential item functioning (DIF in men and women. Methods The participants were 3615 adult general practice patients from 17 regions of Spain, with a first diagnosed major depressive episode. The 12-item WHO-DAS II was administered by the general practitioners during the consultation. We used a non-parametric item response method (Kernel-Smoothing implemented with the TestGraf software to examine the effectiveness of each item (item characteristic curves and their options (option characteristic curves in discriminating between changes in the underliying disability level. We examined composite DIF to know whether women had a higher probability than men of endorsing each item. Results Item response analyses indicated that the twelve items forming the WHO-DAS II perform very well. All items were determined to provide good discrimination across varying standardized levels of the trait. The items also had option characteristic curves that showed good discrimination, given that each increasing option became more likely than the previous as a function of increasing trait level. No gender-related DIF was found on any of the items. Conclusions All WHO-DAS II items were very good at assessing overall disability. Our results supported the appropriateness of the weights assigned to response option categories and showed an absence of gender differences in item functioning.

Item Response Theory with Covariates (IRT-C): Assessing Item Recovery and Differential Item Functioning for the Three-Parameter Logistic Model

Science.gov (United States)

Tay, Louis; Huang, Qiming; Vermunt, Jeroen K.

2016-01-01

In large-scale testing, the use of multigroup approaches is limited for assessing differential item functioning (DIF) across multiple variables as DIF is examined for each variable separately. In contrast, the item response theory with covariate (IRT-C) procedure can be used to examine DIF across multiple variables (covariates) simultaneously. To…

The randomly renewed general item and the randomly inspected item with exponential life distribution

International Nuclear Information System (INIS)

Schneeweiss, W.G.

1979-01-01

For a randomly renewed item the probability distributions of the time to failure and of the duration of down time and the expectations of these random variables are determined. Moreover, it is shown that the same theory applies to randomly checked items with exponential probability distribution of life such as electronic items. The case of periodic renewals is treated as an example. (orig.) [de

World class manufacturing in metallurgical enterprise

Directory of Open Access Journals (Sweden)

B. Gajdzik

2013-01-01

Full Text Available World Class Manufacturing (WCM assumes increase of efficiency of the company by elimination of all the losses, wastage and dangers of safety. In ArcelorMittal the concept of WCM is implemented in particular enterprises within the capital group. In this publication the activities conducted in some of those enterprises are described.

Safety design philosophy of Mitsubishi PWRs

International Nuclear Information System (INIS)

Hakata, T.; Kitamura, T.

1993-01-01

The basic safety design philosophy of Mitsubishi pressurized water reactors (PWRs) is discussed and compared with the British PWR. PWR plants are designed in accordance with the Japanese regulatory guidelines which are similar to American and International Atomic Energy Agency (IAEA) safety criteria and are based on defence-in-depth principles. The high reliability of nuclear power plants is especially emphasized in Mitsubishi PWRs, and this has been demonstrated by the good operating experience of PWR plants in Japan. The safety system designs of six key items, which were discussed in the recent review of overseas designs by British utilities, are addressed to show the difference in the design philosophy between the United Kingdom and Japan. (Author)

K West integrated water treatment system subproject safety analysis document

International Nuclear Information System (INIS)

SEMMENS, L.S.

1999-01-01

This Accident Analysis evaluates unmitigated accident scenarios, and identifies Safety Significant and Safety Class structures, systems, and components for the K West Integrated Water Treatment System

K West integrated water treatment system subproject safety analysis document

Energy Technology Data Exchange (ETDEWEB)

SEMMENS, L.S.

1999-02-24

This Accident Analysis evaluates unmitigated accident scenarios, and identifies Safety Significant and Safety Class structures, systems, and components for the K West Integrated Water Treatment System.

Optimism about safety and group-serving interpretations of safety among pedestrians and cyclists in relation to road use in general and under low light conditions.

Science.gov (United States)

King, M J; Wood, J M; Lacherez, P F; Marszalek, R P

2012-01-01

Drivers are known to be optimistic about their risk of crash involvement, believing that they are less likely to be involved in a crash than other drivers. However, little comparative research has been conducted among other road users. In addition, optimism about crash risk is conceptualised as applying only to an individual's assessment of his or her personal risk of crash involvement. The possibility that the self-serving nature of optimism about safety might be generalised to the group-level as a cyclist or a pedestrian, i.e., becoming group-serving rather than self-serving, has been overlooked in relation to road safety. This study analysed a subset of data collected as part of a larger research project on the visibility of pedestrians, cyclists and road workers, focusing on a set of questionnaire items administered to 406 pedestrians, 838 cyclists and 622 drivers. The items related to safety in various scenarios involving drivers, pedestrians and cyclists, allowing predictions to be derived about group differences in agreement with items based on the assumption that the results would exhibit group-serving bias. Analysis of the responses indicated that specific hypotheses about group-serving interpretations of safety and responsibility were supported in 22 of the 26 comparisons. When the nine comparisons relevant to low lighting conditions were considered separately, seven were found to be supported. The findings of the research have implications for public education and for the likely acceptance of messages which are inconsistent with current assumptions and expectations of pedestrians and cyclists. They also suggest that research into group-serving interpretations of safety, even for temporary roles rather than enduring groups, could be fruitful. Further, there is an implication that gains in safety can be made by better educating road users about the limitations of their visibility and the ramifications of this for their own road safety, particularly in low

An Anesthesia Preinduction Checklist to Improve Information Exchange, Knowledge of Critical Information, Perception of Safety, and Possibly Perception of Teamwork in Anesthesia Teams.

Science.gov (United States)

Tscholl, David W; Weiss, Mona; Kolbe, Michaela; Staender, Sven; Seifert, Burkhardt; Landert, Daniel; Grande, Bastian; Spahn, Donat R; Noethiger, Christoph B

2015-10-01

An anesthesia preinduction checklist (APIC) to be performed before anesthesia induction was introduced and evaluated with respect to 5 team-level outcomes, each being a surrogate end point for patient safety: information exchange (the percentage of checklist items exchanged by a team, out of 12 total items); knowledge of critical information (the percentage of critical information items out of 5 total items such as allergies, reported as known by the members of a team); team members' perceptions of safety (the median scores given by the members of a team on a continuous rating scale); their perception of teamwork (the median scores given by the members of a team on a continuous rating scale); and clinical performance (the percentage of completed items out of 14 required tasks, e.g., suction device checked). A prospective interventional study comparing anesthesia teams using the APIC with a control group not using the APIC was performed using a multimethod design. Trained observers rated information exchange and clinical performance during on-site observations of anesthesia inductions. After the observations, each team member indicated the critical information items they knew and their perceptions of safety and teamwork. One hundred five teams using the APIC were compared with 100 teams not doing so. The medians of the team-level outcome scores in the APIC group versus the control group were as follows: information exchange: 100% vs 33% (P safety: 91% vs 84% (P improves information exchange, knowledge of critical information, and perception of safety in anesthesia teams-all parameters contributing to patient safety. There was a trend indicating improved perception of teamwork.

Development and validation of a new safety climate scale for petrochemical industries.

Science.gov (United States)

Jafari, Mohammad Javad; Eskandari, Davood; Valipour, Firouz; Mehrabi, Yadollah; Charkhand, Hossein; Mirghotbi, Mostafa

2017-01-01

While a considerable body of research has studied safety climate and its role as a leading indicator of organizational safety, much of this work has been conducted with Western manufacturing samples. The current study puts emphasis on the cross-validation of a safety climate model in the non-Western industrial context of Iranian petrochemical industries. The current study was performed in one petrochemical company in Iran. The scale was developed through conducting a literature review followed by a qualitative study with expert participation. After performing a screening process, the initial number of items on the scale was reduced to 68. Ten dimensions (including management commitment, workers' empowerment, communication, blame culture, safety training, job satisfaction, interpersonal relationship, supervision, continuous improvement, and reward system) together with 37 items were extracted from the exploratory factor analysis (EFA) to measure safety climate. Acceptable ranges of internal consistency statistics for the sub-scales were observed. Confirmatory factor analysis (CFA) confirmed the construct validity of the developed safety climate scale for the petrochemical industry workers. The results of reliability showed that the Cronbach's alpha coefficient for the designed scale was 0.94. The ICC was obtained 0.92. This study created a valid and reliable scale for measuring safety climate in petrochemical industries.

Prioritization of generic safety issues

International Nuclear Information System (INIS)

Emrit, R.; Minners, W.; VanderMolen, H.

1983-12-01

This report presents the priority rankings for generic safety issues related to nuclear power plants. The purpose of these rankings is to assist in the timely and efficient allocation of NRC resources for the resolution of those safety issues that have a significant potential for reducing risk. The report focuses on the prioritization of generic safety issues. Issues primarily concerned with the licensing process or environmental protection and not directly related to safety have been excluded from prioritization. The prioritized issues include: TMI Action Plan items under development; previously proposed issues covered by Task Action Plans, except issues designated at Unresolved Safety Issues (USIs) which had already been assigned high priority; and newly-proposed issues. Future supplements to this report will include the prioritization of additional issues. The safety priority rankings are HIGH, MEDIUM, LOW, and DROP and have been assigned on the basis of risk significance estimates, the ratio of risk to costs and other impacts estimated to result if resolutions of the safety issues were implemented, and the consideration of uncertainties and other quantitative or qualitative factors. To the extent practical, estimates are quantitative

New C$_{6}$D$_{6}$ detectors: reduced neutron sensitivity and improved safety

CERN Document Server

Mastinu, Pierfrancesco; Berthoumieux, Eric; Cano-Ott, Daniel; Gramegna, F; Guerrero, Carlos; Massimi, Cristian; Milazzo, Paolo Maria; Mingrone, Federica; Praena, Javier; Prete, G; García, Aczel Regino

2013-01-01

During the 2011 data measurement campaign at n_TOF, the liquid scintillator detectors developed at FZK-Karlsruhe (hereafter named K6D6, [1]) and used with success along 10 years have shown ageing problems, mainly related to liquid leakage. The mould used to produce the carbon fiber structure, containing the liquid and the detection elements, was not available anymore and the technician involved in its construction was retired. Once decided to proceed to the production of new detectors (L6D6 in the following) two major items have been identified: - The detector setup must be able to work in the new class A experimental area (safety requirements advise to avoid the use of the old K6D6 in this area). - If possible, it is useful to reduce the neutron sensitivity, with the aim to have a liquid scintillator detector with very low neutron sensitivity (improving the already high performing K6D6). [1] R.Plag et al., NIM A496 (2003) 425

The Positive Effect of Realia in EFL Classes

Directory of Open Access Journals (Sweden)

Emine Bala

2015-09-01

Full Text Available There are many ways generated by the linguists to teach the language items in EFL classroom; however, bringing ̳realia‘ into the classroom is one of the most effective ways to create an enjoyable class atmosphere and acquire the target language efficiently. Especially, low-level students may suffer from obtaining what teacher presents because they have no chance to synthesize what they learn in the class with real life situations. Using real objects and materials gives students opportunity to experience real life in the class atmosphere and this may facilitate and accelerate their learning process. Accordingly, using visuals stimulates students to maintain studying on the language because practicing the topic with visuals assists students to get involved in more powerful learning. This study illustrates an investigation based on a 20-question exam paper whether getting support from realia augments the students‘ success in the examination or not. Two elementary-level EFL classes took part in this project. Looking at the results, the students who were taught with realia showed more success compared to the others who were not taught with visuals during teaching.

Safety considerations and countermeasures against fire and explosion at an HTGR-hydrogen production system. Proposal of safety design concept

International Nuclear Information System (INIS)

Nishihara, T.; Hada, K.; Shibata, T.; Shiozawa, S.

1996-01-01

Establishment of safety design concept and countermeasures against fire and explosion accidents is among key safety-related issues in an HTGR-hydrogen production system. We propose the different safety design concepts depending upon the origin of fire and explosion which may happen in the HTGR-hydrogen production plant. Against fire and explosion originated outside the reactor building (R/B), namely in the area of hydrogen production plant, the safety design concept is primarily to take a safe distance for preventing the damage on safety-related items or a proof wall if necessary. Because the hydrogen production plant is designed in the same safety level as a conventional chemical plant. The safe distance is proposed to limit an incident overpressure to 10 kPa so as not to suffer any damage on the items and to limit a wall-averaged temperature of concrete structures of the R/B to 175degC according to the current regulation. On the other hand, against a potential possibility of explosion originated inside the R/B, the safety design concept is to minimize the possibility of explosion low enough to assume no occurrence inside the R/B. That is, the measure is to exclude a simultaneous failure of a secondary helium piping and an endothermic chemical reactor. Furthermore, in severe accident condition in which the explosion may be postulated a priori, an incidental overpressure of explosion inside the reactor containment vessel (C/V) should be limited so as not to fail the C/V through restricting the amount of combustible gas ingress into the C/V by means of a combination of C/V isolation valve installed in the helium piping and emergency shut off valve in the process feed gas line. (author)

Surgical Safety in Pediatrics: practical application of the Pediatric Surgical Safety Checklist

Directory of Open Access Journals (Sweden)

Maria Paula de Oliveira Pires

2015-12-01

Full Text Available Objectives: to assess the practical application of the Pediatric Surgical Safety Checklist on the preoperative period and to verify family satisfaction regarding the use of the material. Method: exploratory study that aimed to analyze the use of the checklist by children who underwent surgical interventions. The sample was constituted by 60 children (from preschoolers to teens and 60 family members. The variables related to demographic characterization, filling out the checklist, and family satisfaction, being evaluated through inferential and descriptive statistical analysis. Results: most children (71.7% were male, with a median age of 7.5 years. We identified the achievement of 65.3% of the checklist items, 30.0% were not filled due to non-performance of the team and 4.7% for children and family reasons. In the association analysis, we found that the removal of accessories item (p = 0.008 was the most checked by older children. Regarding satisfaction, the family members evaluated the material as great (63.3% and good (36.7% and believed that there was a reduction of the child's anxiety (83.3%. Conclusion: the use of the checklist in clinical practice can change health services regarding safety culture and promote customer satisfaction.

Item-level and subscale-level factoring of Biggs' Learning Process Questionnaire (LPQ) in a mainland Chinese sample.

Science.gov (United States)

Sachs, J; Gao, L

2000-09-01

The learning process questionnaire (LPQ) has been the source of intensive cross-cultural study. However, an item-level factor analysis of all the LPQ items simultaneously has never been reported. Rather, items within each subscale have been factor analysed to establish subscale unidimensionality and justify the use of composite subscale scores. It was of major interest to see if the six logically constructed items groups of the LPQ would be supported by empirical evidence. Additionally, it was of interest to compare the consistency of the reliability and correlational structure of the LPQ subscales in our study with those of previous cross-cultural studies. Confirmatory factor analysis was used to fit the six-factor item level model and to fit five representative subscale level factor models. A total of 1070 students between the ages of 15 to 18 years was drawn from a representative selection of 29 classes from within 15 secondary schools in Guangzhou, China. Males and females were almost equally represented. The six-factor item level model of the LPQ seemed to fit reasonably well, thus supporting the six dimensional structure of the LPQ and justifying the use of composite subscale scores for each LPQ dimension. However, the reliability of many of these subscales was low. Furthermore, only two subscale-level factor models showed marginally acceptable fit. Substantive considerations supported an oblique three-factor model. Because the LPQ subscales often show low internal consistency reliability, experimental and correlational studies that have used these subscales as dependent measures have been disappointing. It is suggested that some LPQ items should be revised and other items added to improve the inventory's overall psychometric properties.

17 CFR 260.7a-16 - Inclusion of items, differentiation between items and answers, omission of instructions.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Inclusion of items, differentiation between items and answers, omission of instructions. 260.7a-16 Section 260.7a-16 Commodity and... INDENTURE ACT OF 1939 Formal Requirements § 260.7a-16 Inclusion of items, differentiation between items and...

Managing changes of location classes of gas pipelines

Energy Technology Data Exchange (ETDEWEB)

Cunha, Sergio B; Sousa, Antonio Geraldo de [PETROBRAS Transporte S.A. (TRANSPETRO), Rio de Janeiro, RJ (Brazil)

2009-12-19

Most of the gas pipeline design codes utilize a class location system, where the design safety factor and the hydrostatic test factor are determined according to the population density in the vicinities of the pipeline route. Consequently, if an operator is requested or desires to maintain an existing gas pipeline in compliance with its design code, it will reduce the operational pressure or replace pipe sections to increase the wall thickness whenever a change in location class takes place. This article introduces an alternative methodology to deal with changes in location classes of gas pipelines. Initially, selected codes that utilize location class systems are reviewed. Afterwards, a model for the area affected by an ignition following a natural gas pipeline leak is described. Finally, a methodology to determine the MAOP and third part damage mitigation measures for gas transport pipelines that underwent changes in location class is presented. (author)

75 FR 68558 - Proposed Establishment of Class E Airspace; New Hampton, IA

Science.gov (United States)

2010-11-08

...-1035; Airspace Docket No. 10-ACE-12] Proposed Establishment of Class E Airspace; New Hampton, IA AGENCY... action proposes to establish Class E airspace at New Hampton, IA, to accommodate new Standard Instrument... Mercy Medical Center Heliport, New Hampton, IA. Controlled airspace is needed for the safety and...

The Effects of Test Length and Sample Size on Item Parameters in Item Response Theory

Science.gov (United States)

Sahin, Alper; Anil, Duygu

2017-01-01

This study investigates the effects of sample size and test length on item-parameter estimation in test development utilizing three unidimensional dichotomous models of item response theory (IRT). For this purpose, a real language test comprised of 50 items was administered to 6,288 students. Data from this test was used to obtain data sets of…

A guideline for comprehensive evaluation of a licensee's effort to cultivate safety culture

International Nuclear Information System (INIS)

Makino, Maomi; Ishii, Yoichi

2009-01-01

The nuclear industry in Japan had held excellent performance in safety in the world during 90's. However recent events stem from organizational factors and defects of safety culture are pointed out in their contexts. In order to reduce accidents caused by organizational factors, the Japanese Regulatory body NISA (Nuclear and Industrial Safety Agency) decided to evaluate a licensee's effort for the cultivation of safety culture, and to order all licensses to add the provision of cultivating safety culture to their safety preservation rules. The inspection for the new safety preservation rules started in December, 2007. For a measure of evaluation by resident inspectors, NISA and the Japan Nuclear Energy Safety Organization (JNES) prepared a guideline for the prevention of degradation of safety culture and organizational climate. In this guideline, 14 items were defined as the components of the safety culture or as the viewpoints to evaluate the effort made to prevent any degradation of safety culture and organizational climate in the daily safety preservation activities. The 14 items are also used to establish the method to comprehensively evaluate the effort to prevent degradation of safety culture and organizational climate. This method consists of 10 steps: two steps to taken prior to start of the evaluation, two steps to be taken during the evaluation period, 5 steps to be taken during a comprehensive evaluation period and a final step to be taken for comprehensive findings for safety culture. This paper mainly describes the viewpoints to evaluate comprehensively a licensee's effort for cultivation of safety culture. (author)

The power of language used in class

Directory of Open Access Journals (Sweden)

Mitrović Milica

2015-01-01

Full Text Available This article deals with the analysis of the language used in class by: (1 indicating the relevance of this type of analysis in the context of current research questions about the relations between language and education, (2 the analysis of the selected school classes and (3 by presenting methodological characteristics and possible research achievements of this form of analysis. Class language is here seen as one of school languages, and an item for the analysis of teaching and authentic evaluative information about education. Our research comprised the analyses of six classes in Belgrade elementary schools. The aim of the research was to identify and describe the language of the selected classes and to analyse the obtained information in the view of furthering language learning and learning by the use of language. Selected were three lessons in the first and three in the final classes, and planned so that pupils could be the main speakers (lesson repetition and elaboration. The analyses of the teaching contents were done, and the results showed that, compared to pupils, teachers do a major part of talking, that pupils usually give one word or short answers, that they communicate within uniform speech models and have no opportunity to develop a sense of ownership of the language of the lesson which is a precondition for further language learning and using language for school learning. The results also indicate certain contradictions in the identified language practice, which we deem important for further systematic research of language use and learning in our schools.

Safety Evaluation Report: Restart of K-Reactor, Savannah River Site

International Nuclear Information System (INIS)

1991-08-01

In April 1991, the Department of Energy (DOE) issued DOE/DP-0084T, ''Safety Evaluation Report Restart of K-Reactor Savannah River Site.'' The Safety Evaluation Report (SER) documents the results of DOE reviews and evaluations of the programmatic aspects of a large number of issues which need to be satisfactorily addressed before restart. The issues were evaluated for compliance with the restart criteria included in the SER. The results of those evaluations determined that the restart criteria had been satisfied for some of the issues. However, for most of the issues at least part of the applicable restart criteria had not been found to be satisfied a the time the evaluations were prepared. For those issues, open or confirmatory items were identified that required resolution. This document supplements the April 1991 SER. The SER Supplement documents the resolution of several of the open items identified in the SER. Only those issues (sections) for which at least one open item identified in the SER has now been closed are addressed in this Supplement. Additionally, some SER sections had no open items identified. Therefore, this Supplement does not include all sections that were addressed in the SER. If there are any open items remaining to be resolved for the sections included in this Supplement, that is so identified at the end of the section. The resolution of those remaining open times, and all remaining open items for those SER sections not included in this first Supplement, will be documented in future SER Supplements. Resolution of all open items for an issue indicates that its associated restart criteria have been satisfied, and that DOE concludes that the programmatic aspects of the issue have been satisfactorily addressed

Policy and procedures for classification of Class III groundwater at UMTRA Project sites

International Nuclear Information System (INIS)

1989-03-01

The US Environmental Protection Agency (EPA) has recently proposed groundwater regulations for the US Department of Energy's )DOE) Uranium Mill Tailings Remedial Action (UMTRA) Project. These regulations allow the application of supplemental standards at UMTRA Project sites in specific situations. The designation of groundwater as Class III permits the application of supplemental standards. This document discusses a final UMTRA Project policy and procedures for identifying Class III groundwater, including identification of a review area, definition of water quality, quantification of aquifer yield, and identification of methods reasonably employed for public water supply systems. These items, either individually or collectively, need to be investigated in order to determine if groundwaters at UMTRA Project sites are Class III. This document provides a framework for the DOE to determine Class III groundwaters

Interface management: Effective communication to improve process safety

International Nuclear Information System (INIS)

Kelly, Brian; Berger, Scott

2006-01-01

Failure to successfully communicate maintenance activities, abnormal conditions, emergency response procedures, process hazards, and hundreds of other items of critical information can lead to disaster, regardless of the thoroughness of the process safety management system. Therefore, a well-functioning process safety program depends on maintaining successful communication interfaces between each involved employee or stakeholder and the many other employees or stakeholders that person must interact with. The authors discuss a process to identify the critical 'Interfaces' between the many participants in a process safety management system, and then to establish a protocol for each critical interface

Type Classes for Lightweight Substructural Types

Directory of Open Access Journals (Sweden)

Edward Gan

2015-02-01

Full Text Available Linear and substructural types are powerful tools, but adding them to standard functional programming languages often means introducing extra annotations and typing machinery. We propose a lightweight substructural type system design that recasts the structural rules of weakening and contraction as type classes; we demonstrate this design in a prototype language, Clamp. Clamp supports polymorphic substructural types as well as an expressive system of mutable references. At the same time, it adds little additional overhead to a standard Damas-Hindley-Milner type system enriched with type classes. We have established type safety for the core model and implemented a type checker with type inference in Haskell.

Approximation Preserving Reductions among Item Pricing Problems

Science.gov (United States)

Hamane, Ryoso; Itoh, Toshiya; Tomita, Kouhei

When a store sells items to customers, the store wishes to determine the prices of the items to maximize its profit. Intuitively, if the store sells the items with low (resp. high) prices, the customers buy more (resp. less) items, which provides less profit to the store. So it would be hard for the store to decide the prices of items. Assume that the store has a set V of n items and there is a set E of m customers who wish to buy those items, and also assume that each item i ∈ V has the production cost di and each customer ej ∈ E has the valuation vj on the bundle ej ⊆ V of items. When the store sells an item i ∈ V at the price ri, the profit for the item i is pi = ri - di. The goal of the store is to decide the price of each item to maximize its total profit. We refer to this maximization problem as the item pricing problem. In most of the previous works, the item pricing problem was considered under the assumption that pi ≥ 0 for each i ∈ V, however, Balcan, et al. [In Proc. of WINE, LNCS 4858, 2007] introduced the notion of “loss-leader, ” and showed that the seller can get more total profit in the case that pi < 0 is allowed than in the case that pi < 0 is not allowed. In this paper, we derive approximation preserving reductions among several item pricing problems and show that all of them have algorithms with good approximation ratio.

Which Statistic Should Be Used to Detect Item Preknowledge When the Set of Compromised Items Is Known?

Science.gov (United States)

Sinharay, Sandip

2017-09-01

Benefiting from item preknowledge is a major type of fraudulent behavior during educational assessments. Belov suggested the posterior shift statistic for detection of item preknowledge and showed its performance to be better on average than that of seven other statistics for detection of item preknowledge for a known set of compromised items. Sinharay suggested a statistic based on the likelihood ratio test for detection of item preknowledge; the advantage of the statistic is that its null distribution is known. Results from simulated and real data and adaptive and nonadaptive tests are used to demonstrate that the Type I error rate and power of the statistic based on the likelihood ratio test are very similar to those of the posterior shift statistic. Thus, the statistic based on the likelihood ratio test appears promising in detecting item preknowledge when the set of compromised items is known.

An emotional functioning item bank of 24 items for computerized adaptive testing (CAT) was established

DEFF Research Database (Denmark)

Petersen, Morten Aa.; Gamper, Eva-Maria; Costantini, Anna

2016-01-01

of the widely used EORTC Quality of Life questionnaire (QLQ-C30). STUDY DESIGN AND SETTING: On the basis of literature search and evaluations by international samples of experts and cancer patients, 38 candidate items were developed. The psychometric properties of the items were evaluated in a large...... international sample of cancer patients. This included evaluations of dimensionality, item response theory (IRT) model fit, differential item functioning (DIF), and of measurement precision/statistical power. RESULTS: Responses were obtained from 1,023 cancer patients from four countries. The evaluations showed...... that 24 items could be included in a unidimensional IRT model. DIF did not seem to have any significant impact on the estimation of EF. Evaluations indicated that the CAT measure may reduce sample size requirements by up to 50% compared to the QLQ-C30 EF scale without reducing power. CONCLUSION...

Spent Nuclear Fuel (SNF) Project Safety Basis Implementation Strategy

International Nuclear Information System (INIS)

TRAWINSKI, B.J.

2000-01-01

The objective of the Safety Basis Implementation is to ensure that implementation of activities is accomplished in order to support readiness to move spent fuel from K West Basin. Activities may be performed directly by the Safety Basis Implementation Team or they may be performed by other organizations and tracked by the Team. This strategy will focus on five key elements, (1) Administration of Safety Basis Implementation (general items), (2) Implementing documents, (3) Implementing equipment (including verification of operability), (4) Training, (5) SNF Project Technical Requirements (STRS) database system

Factoring handedness data: I. Item analysis.

Science.gov (United States)

Messinger, H B; Messinger, M I

1995-12-01

Recently in this journal Peters and Murphy challenged the validity of factor analyses done on bimodal handedness data, suggesting instead that right- and left-handers be studied separately. But bimodality may be avoidable if attention is paid to Oldfield's questionnaire format and instructions for the subjects. Two characteristics appear crucial: a two-column LEFT-RIGHT format for the body of the instrument and what we call Oldfield's Admonition: not to indicate strong preference for handedness item, such as write, unless "... the preference is so strong that you would never try to use the other hand unless absolutely forced to...". Attaining unimodality of an item distribution would seem to overcome the objections of Peters and Murphy. In a 1984 survey in Boston we used Oldfield's ten-item questionnaire exactly as published. This produced unimodal item distributions. With reflection of the five-point item scale and a logarithmic transformation, we achieved a degree of normalization for the items. Two surveys elsewhere based on Oldfield's 20-item list but with changes in the questionnaire format and the instructions, yielded markedly different item distributions with peaks at each extreme and sometimes in the middle as well.

An Assessment of the Quality of Life of Patients With Class III Deformities Treated With Orthognathic Surgery.

Science.gov (United States)

Kilinc, Adnan; Ertas, Umit

2015-07-01

To evaluate quality of life (QoL) from a broad perspective by a comparison of Turkish patients undergoing orthognathic surgery to correct Angle Class III skeletal deformity with a control group composed of participants without dentofacial deformity using general health, generic oral health, and condition-specific QoL approaches. Thirty patients who underwent orthognathic surgery to correct Class III relations (monomaxillary and bimaxillary groups) and 30 participants with Class I skeletal structure and good dentofacial harmony (control group) were evaluated. Condition-specific QoL through a 22-item Orthognathic Quality of Life Questionnaire (OQLQ), generic oral health-related QoL through a 14-item Short-Form Oral Health Impact Profile (OHIP-14), and generic health-related QoL through a 36-item Short-Form Health Survey (SF-36) were assessed. When the groups were compared, OQLQ scores showed a significant difference in the oral function domain only in the bimaxillary group (P orthognathic surgical patients appeared to be similar to that of participants without dentofacial deformities. Oral health-related QoL of orthognathic surgical patients seemed moderately similar to that of participants without dentofacial deformities. The combined use of these methods is helpful for evaluating QoL from a larger perspective. Copyright © 2015 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

The Safety Attitudes Questionnaire: psychometric properties, benchmarking data, and emerging research

Directory of Open Access Journals (Sweden)

Boyden James

2006-04-01

Full Text Available Abstract Background There is widespread interest in measuring healthcare provider attitudes about issues relevant to patient safety (often called safety climate or safety culture. Here we report the psychometric properties, establish benchmarking data, and discuss emerging areas of research with the University of Texas Safety Attitudes Questionnaire. Methods Six cross-sectional surveys of health care providers (n = 10,843 in 203 clinical areas (including critical care units, operating rooms, inpatient settings, and ambulatory clinics in three countries (USA, UK, New Zealand. Multilevel factor analyses yielded results at the clinical area level and the respondent nested within clinical area level. We report scale reliability, floor/ceiling effects, item factor loadings, inter-factor correlations, and percentage of respondents who agree with each item and scale. Results A six factor model of provider attitudes fit to the data at both the clinical area and respondent nested within clinical area levels. The factors were: Teamwork Climate, Safety Climate, Perceptions of Management, Job Satisfaction, Working Conditions, and Stress Recognition. Scale reliability was 0.9. Provider attitudes varied greatly both within and among organizations. Results are presented to allow benchmarking among organizations and emerging research is discussed. Conclusion The Safety Attitudes Questionnaire demonstrated good psychometric properties. Healthcare organizations can use the survey to measure caregiver attitudes about six patient safety-related domains, to compare themselves with other organizations, to prompt interventions to improve safety attitudes and to measure the effectiveness of these interventions.

Item Modeling Concept Based on Multimedia Authoring

Directory of Open Access Journals (Sweden)

Janez Stergar

2008-09-01

Full Text Available In this paper a modern item design framework for computer based assessment based on Flash authoring environment will be introduced. Question design will be discussed as well as the multimedia authoring environment used for item modeling emphasized. Item type templates are a structured means of collecting and storing item information that can be used to improve the efficiency and security of the innovative item design process. Templates can modernize the item design, enhance and speed up the development process. Along with content creation, multimedia has vast potential for use in innovative testing. The introduced item design template is based on taxonomy of innovative items which have great potential for expanding the content areas and construct coverage of an assessment. The presented item design approach is based on GUI's – one for question design based on implemented item design templates and one for user interaction tracking/retrieval. The concept of user interfaces based on Flash technology will be discussed as well as implementation of the innovative approach of the item design forms with multimedia authoring. Also an innovative method for user interaction storage/retrieval based on PHP extending Flash capabilities in the proposed framework will be introduced.

The medial temporal lobes distinguish between within-item and item-context relations during autobiographical memory retrieval.

Science.gov (United States)

Sheldon, Signy; Levine, Brian

2015-12-01

During autobiographical memory retrieval, the medial temporal lobes (MTL) relate together multiple event elements, including object (within-item relations) and context (item-context relations) information, to create a cohesive memory. There is consistent support for a functional specialization within the MTL according to these relational processes, much of which comes from recognition memory experiments. In this study, we compared brain activation patterns associated with retrieving within-item relations (i.e., associating conceptual and sensory-perceptual object features) and item-context relations (i.e., spatial relations among objects) with respect to naturalistic autobiographical retrieval. We developed a novel paradigm that cued participants to retrieve information about past autobiographical events, non-episodic within-item relations, and non-episodic item-context relations with the perceptuomotor aspects of retrieval equated across these conditions. We used multivariate analysis techniques to extract common and distinct patterns of activity among these conditions within the MTL and across the whole brain, both in terms of spatial and temporal patterns of activity. The anterior MTL (perirhinal cortex and anterior hippocampus) was preferentially recruited for generating within-item relations later in retrieval whereas the posterior MTL (posterior parahippocampal cortex and posterior hippocampus) was preferentially recruited for generating item-context relations across the retrieval phase. These findings provide novel evidence for functional specialization within the MTL with respect to naturalistic memory retrieval. © 2015 Wiley Periodicals, Inc.

Using existing questionnaires in latent class analysis

DEFF Research Database (Denmark)

Nielsen, Anne Molgaard; Vach, Werner; Kent, Peter

2016-01-01

BACKGROUND: Latent class analysis (LCA) is increasingly being used in health research, but optimal approaches to handling complex clinical data are unclear. One issue is that commonly used questionnaires are multidimensional, but expressed as summary scores. Using the example of low back pain (LBP......), the aim of this study was to explore and descriptively compare the application of LCA when using questionnaire summary scores and when using single items to subgrouping of patients based on multidimensional data. MATERIALS AND METHODS: Baseline data from 928 LBP patients in an observational study were...

Differential item functioning of the patient-reported outcomes information system (PROMIS®) pain interference item bank by language (Spanish versus English).

Science.gov (United States)

Paz, Sylvia H; Spritzer, Karen L; Reise, Steven P; Hays, Ron D

2017-06-01

About 70% of Latinos, 5 years old or older, in the United States speak Spanish at home. Measurement equivalence of the PROMIS ® pain interference (PI) item bank by language of administration (English versus Spanish) has not been evaluated. A sample of 527 adult Spanish-speaking Latinos completed the Spanish version of the 41-item PROMIS ® pain interference item bank. We evaluate dimensionality, monotonicity and local independence of the Spanish-language items. Then we evaluate differential item functioning (DIF) using ordinal logistic regression with item response theory scores estimated from DIF-free "anchor" items. One of the 41 items in the Spanish version of the PROMIS ® PI item bank was identified as having significant uniform DIF. English- and Spanish-speaking subjects with the same level of pain interference responded differently to 1 of the 41 items in the PROMIS ® PI item bank. This item was not retained due to proprietary issues. The original English language item parameters can be used when estimating PROMIS ® PI scores.

77 FR 27666 - Proposed Amendment of Class E Airspace; Bar Harbor, ME

Science.gov (United States)

2012-05-11

...-1366; Airspace Docket No. 11-ANE-13] Proposed Amendment of Class E Airspace; Bar Harbor, ME AGENCY... action proposes to amend Class E Airspace at Bar Harbor, ME, as the Surry Non-Directional Radio Beacon... Hancock County-Bar Harbor Airport. This action would enhance the safety and airspace management of...

A strategy for optimizing item-pool management

NARCIS (Netherlands)

Ariel, A.; van der Linden, Willem J.; Veldkamp, Bernard P.

2006-01-01

Item-pool management requires a balancing act between the input of new items into the pool and the output of tests assembled from it. A strategy for optimizing item-pool management is presented that is based on the idea of a periodic update of an optimal blueprint for the item pool to tune item

Food safety issues and training methods for ready-to-eat foods in the grocery industry.

Science.gov (United States)

Binkley, Margaret; Ghiselli, Richard

2005-10-01

As Americans have become more pressed for time, the use of convenient, simplified meals become a way of life. One aspect of this trend, known as Home Meal Replacement (IIMR), has increased in sales since its inception. Between 1999 and 2001, the average annual expenditure per consumer rose 5.6 pereent, and $958 per person per year was spent in 2002. Along with this growth, food safety risks may have increased. The study reported here examined efforts being undertaken by grocery and convenience stores to control the wholesomeness of INR food items. After a convenience sample of 500 grocery store executives was identified, a 32-item questionnaire was developed and mailed to the executives. The results indicate that the industry has taken food safety seriously with only 10 pereent reporting that they have no food safety training. The executives cited employee turnover as a major concern in food safety today, along with lack of food safety knowledge of the consumer and improper holding temperatures.

RateMyProfessors.com versus formal in-class student evaluations of teaching

Directory of Open Access Journals (Sweden)

Theodore Coladarci

2007-05-01

Full Text Available Using data for 426 instructors at the University of Maine, we examined the relationship between RateMyProfessors.com (RMP indices and formal in-class student evaluations of teaching (SET. The two primary RMP indices correlate substantively and significantly with their respective SET items: RMP overall quality correlates r = .68 with SET item, Overall, how would you rate the instructor?; and RMP ease correlates r = .44 with SET item, How did the work load for this course compare to that of others of equal credit? Further, RMP overall quality and RMP ease each correlates with its corresponding SET factor derived from a principal components analysis of all 29 SET items: r = .57 and .51, respectively. While these RMP/SET correlations should give pause to those who are inclined to dismiss RMP indices as meaningless, the amount of variance left unexplained in SET criteria limits the utility of RMP. The ultimate implication of our results, we believe, is that higher education institutions should make their SET data publicly available online.

Safety integrity requirements for computer based I ampersand C systems

International Nuclear Information System (INIS)

Thuy, N.N.Q.; Ficheux-Vapne, F.

1997-01-01

In order to take into account increasingly demanding functional requirements, many instrumentation and control (I ampersand C) systems in nuclear power plants are implemented with computers. In order to ensure the required safety integrity of such equipment, i.e., to ensure that they satisfactorily perform the required safety functions under all stated conditions and within stated periods of time, requirements applicable to these equipment and to their life cycle need to be expressed and followed. On the other hand, the experience of the last years has led EDF (Electricite de France) and its partners to consider three classes of systems and equipment, according to their importance to safety. In the EPR project (European Pressurized water Reactor), these classes are labeled E1A, E1B and E2. The objective of this paper is to present the outline of the work currently done in the framework of the ETC-I (EPR Technical Code for I ampersand C) regarding safety integrity requirements applicable to each of the three classes. 4 refs., 2 figs

Intensive care unit nurses' perceptions of safety after a highly specific safety intervention.

Science.gov (United States)

Elder, N C; Brungs, S M; Nagy, M; Kudel, I; Render, M L

2008-02-01

It is unknown if successful changes in specific safety practices in the intensive care unit (ICU) generalize to broader concepts of patient safety by staff nurses. To explore perceptions of patient safety among nursing staff in ICUs following participation in a safety project that decreased hospital acquired infections. After implementation of practices that reduced catheter-related bloodstream infections in ICUs at four community hospitals, ICU nurses participated in focus groups to discuss patient safety. Audiotapes from the focus groups were transcribed, and two independent reviewers categorised the data which were triangulated with responses from selected questions of safety climate surveys and with the safety checklists used by management leadership on walk rounds. Thirty-three nurses attended eight focus groups; 92 nurses and managers completed safety climate surveys, and three separate leadership checklists were reviewed. In focus groups, nurses predominantly related patient safety to dangers in the physical environment (eg, bed rails, alarms, restraints, equipment, etc.) and to medication administration. These areas also represented 47% of checklist items from leadership walk rounds. Nurses most frequently mentioned self-initiated "double checking" as their main safety task. Focus-group participants and survey responses both noted inconsistency between management's verbal and written commitment compared with their day-to-day support of patient safety issues. ICU nurses who participated in a project to decrease hospital acquired infections did not generalize their experience to other aspects of patient safety or relate it to management's interest in patient safety. These findings are consistent with many adult learning theories, where self-initiated tasks, combined with immediate, but temporary problem-solving, are stronger learning forces than management-led activities with delayed feedback.

Development of safety evaluation guidelines for base-isolated buildings in Japan

International Nuclear Information System (INIS)

Aoyama, Hiroyuki

1989-01-01

This paper describes the safety evaluation guidelines and the review process for non-nuclear base-isolated buildings proposed for construction in Japan. The paper discusses the guidelines application for two types of soil: hard soil and intermediate soil (soft soil was excluded.); safety evaluation items included in the level C design review; and safety margin of base isolation. Lessons learned through these design review efforts have potential applicability to design of seismic base isolation for nuclear power plants

Item response theory - A first approach

Science.gov (United States)

Nunes, Sandra; Oliveira, Teresa; Oliveira, Amílcar

2017-07-01

The Item Response Theory (IRT) has become one of the most popular scoring frameworks for measurement data, frequently used in computerized adaptive testing, cognitively diagnostic assessment and test equating. According to Andrade et al. (2000), IRT can be defined as a set of mathematical models (Item Response Models - IRM) constructed to represent the probability of an individual giving the right answer to an item of a particular test. The number of Item Responsible Models available to measurement analysis has increased considerably in the last fifteen years due to increasing computer power and due to a demand for accuracy and more meaningful inferences grounded in complex data. The developments in modeling with Item Response Theory were related with developments in estimation theory, most remarkably Bayesian estimation with Markov chain Monte Carlo algorithms (Patz & Junker, 1999). The popularity of Item Response Theory has also implied numerous overviews in books and journals, and many connections between IRT and other statistical estimation procedures, such as factor analysis and structural equation modeling, have been made repeatedly (Van der Lindem & Hambleton, 1997). As stated before the Item Response Theory covers a variety of measurement models, ranging from basic one-dimensional models for dichotomously and polytomously scored items and their multidimensional analogues to models that incorporate information about cognitive sub-processes which influence the overall item response process. The aim of this work is to introduce the main concepts associated with one-dimensional models of Item Response Theory, to specify the logistic models with one, two and three parameters, to discuss some properties of these models and to present the main estimation procedures.

Management services, quality assurance, and safety

International Nuclear Information System (INIS)

Anon.

1987-01-01

Broad technical and administrative support for the programmatic research and development activities of the Fusion Energy Division is provided by the Management Services Section and by the division's quality assurance (QA) and safety programs. Support is provided through effective communication with division programmatic staff and through the coordination of resources from disciplines outside the division. The QA activity in the division emphasizes the development and documentation of a QA program that conforms to national standards, the review and approval of engineering documents, supplier surveillance, identification and documentation of nonconforming items, audits, and QA assessments/plans. The division's safety activities include a formal safety program, emergency planning activities, and environmental protection services. Efforts devoted to the removal of hazardous wastes from division facilities were expanded during 1986

The Divergent Meanings of Life Satisfaction: Item Response Modeling of the Satisfaction with Life Scale in Greenland and Norway

Science.gov (United States)

Vitterso, Joar; Biswas-Diener, Robert; Diener, Ed

2005-01-01

Cultural differences in response to the Satisfaction With Life Scale (SWLS) items is investigated. Data were fit to a mixed Rasch model in order to identify latent classes of participants in a combined sample of Norwegians (N = 461) and Greenlanders (N = 180). Initial analyses showed no mean difference in life satisfaction between the two…

Basic fracture toughness requirements for ferritic materials of nuclear class pressure retaining equipment in NPP

International Nuclear Information System (INIS)

Ning Dong; Yao Weida

2005-01-01

In this paper, theory basis on cold brittleness and anti-brittle fracture design of ferritic materials are introduced summarily and fracture toughness requirements for ferritic materials in ASME code for nuclear safety class pressure retaining equipment in NPP are summarized and evaluated. The results show that notch impact toughness requirements for materials relate to nuclear safety class of materials so as to ensure that brittle fracture of retaining pressure boundary in NPP can not occur. (authors)

The new M-class of Mercedes Benz; Die neue M-Klasse von Mercedes-Benz

Energy Technology Data Exchange (ETDEWEB)

Liebl, Johannes; Siebenpfeiffer, Wolfgang (eds.)

2011-12-15

The contribution under consideration presents the new M-class of Mercedes-Benz describing the following aspects: Design, positioning, design, interior equipment, motor/gear, consumption/emission, powertrain, chassis, NVH/comfort/aerodynamics, testing, integral safety, passive safety, driver assistance system.

Safety Precautions and Operating Procedures in an (A)BSL-4 Laboratory: 2. General Practices.

Science.gov (United States)

Mazur, Steven; Holbrook, Michael R; Burdette, Tracey; Joselyn, Nicole; Barr, Jason; Pusl, Daniela; Bollinger, Laura; Coe, Linda; Jahrling, Peter B; Lackemeyer, Matthew G; Wada, Jiro; Kuhn, Jens H; Janosko, Krisztina

2016-10-03

Work in a biosafety level 4 (BSL-4) containment laboratory requires time and great attention to detail. The same work that is done in a BSL-2 laboratory with non-high-consequence pathogens will take significantly longer in a BSL-4 setting. This increased time requirement is due to a multitude of factors that are aimed at protecting the researcher from laboratory-acquired infections, the work environment from potential contamination and the local community from possible release of high-consequence pathogens. Inside the laboratory, movement is restricted due to air hoses attached to the mandatory full-body safety suits. In addition, disinfection of every item that is removed from Class II biosafety cabinets (BSCs) is required. Laboratory specialists must be trained in the practices of the BSL-4 laboratory and must show high proficiency in the skills they are performing. The focus of this article is to outline proper procedures and techniques to ensure laboratory biosafety and experimental accuracy using a standard viral plaque assay as an example procedure. In particular, proper techniques to work safely in a BSL-4 environment when performing an experiment will be visually emphasized. These techniques include: setting up a Class II BSC for experiments, proper cleaning of the Class II BSC when finished working, waste management and safe disposal of waste generated inside a BSL-4 laboratory, and the removal of inactivated samples from inside a BSL-4 laboratory to the BSL-2 laboratory.

Setting safety stocks in multi-stage inventory systems under rolling horizon mathematical programming models

NARCIS (Netherlands)

Boulaksil, Y.; Fransoo, J.C.; van Halm, E.N.G.

2009-01-01

This paper considers the problem of determining safety stocks in multi-item multi-stage inventory systems that face demand uncertainties. Safety stocks are necessary to make the supply chain, which is driven by forecasts of customer orders, responsive to (demand) uncertainties and to achieve

Proposal for the classification of scenarios for deep geological repositories in probability classes

International Nuclear Information System (INIS)

Beuth, Thomas

2013-03-01

The provided report was elaborated in the framework of the project 3609R03210 ''Research and Development for Proof of the long-term Safety of Deep Geological Repositories''. It contains a proposal for a methodology that enables the assignment of developed scenarios in the frame of Safety Cases to defined probability classes. The assignment takes place indirectly through the categorization of the defining relevant factors (so-called FEP: Features, Events and Processes) of the respective scenarios also in probability classes. Therefore, decision trees and criteria were developed for the categorization of relevant factors in classes. Besides the description of the methodology another focal point of the work was the application of the method taking into account a defined scenario. By means of the scenario the different steps of the method and the decision criteria were documented, respectively. In addition, potential subjective influences along the path of decisions regarding the assignment of scenarios in probability classes were identified.

Investigating Separate and Concurrent Approaches for Item Parameter Drift in 3PL Item Response Theory Equating

Science.gov (United States)

Arce-Ferrer, Alvaro J.; Bulut, Okan

2017-01-01

This study examines separate and concurrent approaches to combine the detection of item parameter drift (IPD) and the estimation of scale transformation coefficients in the context of the common item nonequivalent groups design with the three-parameter item response theory equating. The study uses real and synthetic data sets to compare the two…

Identifying Country-Specific Cultures of Physics Education: A differential item functioning approach

Science.gov (United States)

Mesic, Vanes

2012-11-01

In international large-scale assessments of educational outcomes, student achievement is often represented by unidimensional constructs. This approach allows for drawing general conclusions about country rankings with respect to the given achievement measure, but it typically does not provide specific diagnostic information which is necessary for systematic comparisons and improvements of educational systems. Useful information could be obtained by exploring the differences in national profiles of student achievement between low-achieving and high-achieving countries. In this study, we aimed to identify the relative weaknesses and strengths of eighth graders' physics achievement in Bosnia and Herzegovina in comparison to the achievement of their peers from Slovenia. For this purpose, we ran a secondary analysis of Trends in International Mathematics and Science Study (TIMSS) 2007 data. The student sample consisted of 4,220 students from Bosnia and Herzegovina and 4,043 students from Slovenia. After analysing the cognitive demands of TIMSS 2007 physics items, the correspondent differential item functioning (DIF)/differential group functioning contrasts were estimated. Approximately 40% of items exhibited large DIF contrasts, indicating significant differences between cultures of physics education in Bosnia and Herzegovina and Slovenia. The relative strength of students from Bosnia and Herzegovina showed to be mainly associated with the topic area 'Electricity and magnetism'. Classes of items which required the knowledge of experimental method, counterintuitive thinking, proportional reasoning and/or the use of complex knowledge structures proved to be differentially easier for students from Slovenia. In the light of the presented results, the common practice of ranking countries with respect to universally established cognitive categories seems to be potentially misleading.

A theory-driven, longitudinal evaluation of the impact of team training on safety culture in 24 hospitals.

Science.gov (United States)

Jones, Katherine J; Skinner, Anne M; High, Robin; Reiter-Palmon, Roni

2013-05-01

Effective teamwork facilitates collective learning, which is integral to safety culture. There are no rigorous evaluations of the impact of team training on the four components of safety culture-reporting, just, flexible and learning cultures. We evaluated the impact of a year-long team training programme on safety culture in 24 hospitals using two theoretical frameworks. We used two quasi-experimental designs: a cross-sectional comparison of hospital survey on patient safety culture (HSOPS) results from an intervention group of 24 hospitals to a static group of 13 hospitals and a pre-post comparison of HSOPS results within intervention hospitals. Dependent variables were HSOPS items representing the four components of safety culture; independent variables were derived from items added to the HSOPS that measured the extent of team training, learning and transfer. We used a generalised linear mixed model approach to account for the correlated nature of the data. 59% of 2137 respondents from the intervention group reported receiving team training. Intervention group HSOPS scores were significantly higher than static group scores in three dimensions assessing the flexible and learning components of safety culture. The distribution of the adoption of team behaviours (transfer) varied in the intervention group from 2.8% to 31.0%. Adoption of team behaviours was significantly associated with odds of an individual reacting more positively at reassessment than baseline to nine items reflecting all four components of safety culture. Team training can result in transformational change in safety culture when the work environment supports the transfer of learning to new behaviour.

Analysis of differential item functioning in the depression item bank from the Patient Reported Outcome Measurement Information System (PROMIS: An item response theory approach

Directory of Open Access Journals (Sweden)

JOSEPH P. EIMICKE

2009-06-01

Full Text Available The aims of this paper are to present findings related to differential item functioning (DIF in the Patient Reported Outcome Measurement Information System (PROMIS depression item bank, and to discuss potential threats to the validity of results from studies of DIF. The 32 depression items studied were modified from several widely used instruments. DIF analyses of gender, age and education were performed using a sample of 735 individuals recruited by a survey polling firm. DIF hypotheses were generated by asking content experts to indicate whether or not they expected DIF to be present, and the direction of the DIF with respect to the studied comparison groups. Primary analyses were conducted using the graded item response model (for polytomous, ordered response category data with likelihood ratio tests of DIF, accompanied by magnitude measures. Sensitivity analyses were performed using other item response models and approaches to DIF detection. Despite some caveats, the items that are recommended for exclusion or for separate calibration were "I felt like crying" and "I had trouble enjoying things that I used to enjoy." The item, "I felt I had no energy," was also flagged as evidencing DIF, and recommended for additional review. On the one hand, false DIF detection (Type 1 error was controlled to the extent possible by ensuring model fit and purification. On the other hand, power for DIF detection might have been compromised by several factors, including sparse data and small sample sizes. Nonetheless, practical and not just statistical significance should be considered. In this case the overall magnitude and impact of DIF was small for the groups studied, although impact was relatively large for some individuals.

Social space and cultural class divisions: the forms of capital and contemporary lifestyle differentiation.

Science.gov (United States)

Flemmen, Magne; Jarness, Vegard; Rosenlund, Lennart

2018-03-01

In this article, we address whether and how contemporary social classes are marked by distinct lifestyles. We assess the model of the social space, a novel approach to class analysis pioneered by Bourdieu's Distinction. Although pivotal in Bourdieu's work, this model is too often overlooked in later research, making its contemporary relevance difficult to assess. We redress this by using the social space as a framework through which to study the cultural manifestation of class divisions in lifestyle differences in contemporary Norwegian society. Through a Multiple Correspondence Analysis (MCA) of unusually rich survey data, we reveal a structure strikingly similar to the model in Distinction, with a primary dimension of the volume of capital, and a secondary dimension of the composition of capital. While avoiding the substantialist fallacy of predefined notions of 'highbrow' and 'lowbrow' tastes, we explore how 168 lifestyle items map onto this social space. This reveals distinct classed lifestyles according to both dimensions of the social space. The lifestyles of the upper classes are distinctly demanding in terms of resources. Among those rich in economic capital, this manifests itself in a lifestyle which involves a quest for excitement, and which is bodily oriented and expensive. For their counterparts rich in cultural capital, a more ascetic and intellectually oriented lifestyle manifests itself, demanding of resources in the sense of requiring symbolic mastery, combining a taste for canonized, legitimate culture with more cosmopolitan and 'popular' items. In contrast to many studies' descriptions of the lower classes as 'disengaged' and 'inactive', we find evidence of distinct tastes on their part. Our analysis thus affirms the validity of Bourdieu's model of social class and the contention that classes tend to take the form of status groups. We challenge dominant positions in cultural stratification research, while questioning the aptness of the metaphor of

SNF fuel retrieval sub project safety analysis document

International Nuclear Information System (INIS)

BERGMANN, D.W.

1999-01-01

This safety analysis is for the SNF Fuel Retrieval (FRS) Sub Project. The FRS equipment will be added to K West and K East Basins to facilitate retrieval, cleaning and repackaging the spent nuclear fuel into Multi-Canister Overpack baskets. The document includes a hazard evaluation, identifies bounding accidents, documents analyses of the accidents and establishes safety class or safety significant equipment to mitigate accidents as needed

SNF fuel retrieval sub project safety analysis document

Energy Technology Data Exchange (ETDEWEB)

BERGMANN, D.W.

1999-02-24

This safety analysis is for the SNF Fuel Retrieval (FRS) Sub Project. The FRS equipment will be added to K West and K East Basins to facilitate retrieval, cleaning and repackaging the spent nuclear fuel into Multi-Canister Overpack baskets. The document includes a hazard evaluation, identifies bounding accidents, documents analyses of the accidents and establishes safety class or safety significant equipment to mitigate accidents as needed.

76 FR 60474 - Commercial Item Handbook

Science.gov (United States)

2011-09-29

... DEPARTMENT OF DEFENSE Defense Acquisition Regulations System Commercial Item Handbook AGENCY.... SUMMARY: DoD has updated its Commercial Item Handbook. The purpose of the Handbook is to help acquisition personnel develop sound business strategies for procuring commercial items. DoD is seeking industry input on...

Evidence for the safety assurance of the radiation associated equipments for stat-up check

International Nuclear Information System (INIS)

Takahashi, Yasuyuki; Igarashi, Hiroshi; Saito, Kyoko; Kawaharada, Yasuhiro; Hirano, Kunihiro; Murase, Kenya; Mochizuki, Teruhito

2008-01-01

Based on the new amendment of the Medical Service Law and the Pharmaceutical Affairs Law, the safety control for the medical equipments and devices was strengthened; and a radiological technologist should be stipulated as a safety control manager for the medical equipments and devices. Although it is thought that Start-up check is important for the safety assurance, the enforcement situation is not clear until now. In this report, on the occasion of the start-up of the new Law, questionnaire about the start up check (time and a check items) were investigated from 56 hospitals applying the visit interview. Modality by modality check up time was obtained from 261 institutions by the descriptive study paper type. Start-up check and arming up were applied for almost all modalities about 30 minutes before start of the clinical tests. The check up items for the medical equipments and devices depended on each hospital. Therefore, safety assurance should be established, cooperating with the medical equipment distributors, the hospital sharing the checked results for the patients' safety. (author)

Safety Basis Report

International Nuclear Information System (INIS)

R.J. Garrett

2002-01-01

As part of the internal Integrated Safety Management Assessment verification process, it was determined that there was a lack of documentation that summarizes the safety basis of the current Yucca Mountain Project (YMP) site characterization activities. It was noted that a safety basis would make it possible to establish a technically justifiable graded approach to the implementation of the requirements identified in the Standards/Requirements Identification Document. The Standards/Requirements Identification Documents commit a facility to compliance with specific requirements and, together with the hazard baseline documentation, provide a technical basis for ensuring that the public and workers are protected. This Safety Basis Report has been developed to establish and document the safety basis of the current site characterization activities, establish and document the hazard baseline, and provide the technical basis for identifying structures, systems, and components (SSCs) that perform functions necessary to protect the public, the worker, and the environment from hazards unique to the YMP site characterization activities. This technical basis for identifying SSCs serves as a grading process for the implementation of programs such as Conduct of Operations (DOE Order 5480.19) and the Suspect/Counterfeit Items Program. In addition, this report provides a consolidated summary of the hazards analyses processes developed to support the design, construction, and operation of the YMP site characterization facilities and, therefore, provides a tool for evaluating the safety impacts of changes to the design and operation of the YMP site characterization activities

Safety Basis Report

Energy Technology Data Exchange (ETDEWEB)

R.J. Garrett

2002-01-14

As part of the internal Integrated Safety Management Assessment verification process, it was determined that there was a lack of documentation that summarizes the safety basis of the current Yucca Mountain Project (YMP) site characterization activities. It was noted that a safety basis would make it possible to establish a technically justifiable graded approach to the implementation of the requirements identified in the Standards/Requirements Identification Document. The Standards/Requirements Identification Documents commit a facility to compliance with specific requirements and, together with the hazard baseline documentation, provide a technical basis for ensuring that the public and workers are protected. This Safety Basis Report has been developed to establish and document the safety basis of the current site characterization activities, establish and document the hazard baseline, and provide the technical basis for identifying structures, systems, and components (SSCs) that perform functions necessary to protect the public, the worker, and the environment from hazards unique to the YMP site characterization activities. This technical basis for identifying SSCs serves as a grading process for the implementation of programs such as Conduct of Operations (DOE Order 5480.19) and the Suspect/Counterfeit Items Program. In addition, this report provides a consolidated summary of the hazards analyses processes developed to support the design, construction, and operation of the YMP site characterization facilities and, therefore, provides a tool for evaluating the safety impacts of changes to the design and operation of the YMP site characterization activities.

Automated identification of retained surgical items in radiological images

Science.gov (United States)

Agam, Gady; Gan, Lin; Moric, Mario; Gluncic, Vicko

2015-03-01

Retained surgical items (RSIs) in patients is a major operating room (OR) patient safety concern. An RSI is any surgical tool, sponge, needle or other item inadvertently left in a patients body during the course of surgery. If left undetected, RSIs may lead to serious negative health consequences such as sepsis, internal bleeding, and even death. To help physicians efficiently and effectively detect RSIs, we are developing computer-aided detection (CADe) software for X-ray (XR) image analysis, utilizing large amounts of currently available image data to produce a clinically effective RSI detection system. Physician analysis of XRs for the purpose of RSI detection is a relatively lengthy process that may take up to 45 minutes to complete. It is also error prone due to the relatively low acuity of the human eye for RSIs in XR images. The system we are developing is based on computer vision and machine learning algorithms. We address the problem of low incidence by proposing synthesis algorithms. The CADe software we are developing may be integrated into a picture archiving and communication system (PACS), be implemented as a stand-alone software application, or be integrated into portable XR machine software through application programming interfaces. Preliminary experimental results on actual XR images demonstrate the effectiveness of the proposed approach.

Dynamic inventory rationing strategies for inventory systems with two demand classes, Poisson demand and backordering

NARCIS (Netherlands)

Teunter, Ruud H.; Haneveld, Willem K. Klein

2008-01-01

We study inventory systems with two demand classes (critical and non-critical), Poisson demand and backordering. We analyze dynamic rationing strategies where the number of items reserved for critical demand depends on the remaining time until the next order arrives. Different from results in the

Levels of safety

International Nuclear Information System (INIS)

Povyakalo, A.A.

1996-01-01

When speaking about danger of catastrophe, it is the first level of danger. Its absence is the first level of safety. When speaking about danger of danger of catastrophe, it is the second level of danger. Its absence is the second level of safety. The paper proposes the way to formalize these ideas and use formal models to construct the states-and-event scale for a given object. The proposed approach can be applied to objects of different nature. The states-and-events scale may be used for transformation of initial objectives state-and-transitions graph to reduce bad classes of states

Safety study application guide

International Nuclear Information System (INIS)

1993-07-01

Martin Marietta Energy Systems, Inc., (Energy Systems) is committed to performing and documenting safety analyses for facilities it manages for the Department of Energy (DOE). Included are analyses of existing facilities done under the aegis of the Safety Analysis Report Upgrade Program, and analyses of new and modified facilities. A graded approach is used wherein the level of analysis and documentation for each facility is commensurate with the magnitude of the hazard(s), the complexity of the facility and the stage of the facility life cycle. Safety analysis reports (SARs) for hazard Category 1 and 2 facilities are usually detailed and extensive because these categories are associated with public health and safety risk. SARs for Category 3 are normally much less extensive because the risk to public health and safety is slight. At Energy Systems, safety studies are the name given to SARs for Category 3 (formerly open-quotes lowclose quotes) facilities. Safety studies are the appropriate instrument when on-site risks are limited to irreversible consequences to a few people, and off-site consequences are limited to reversible consequences to a few people. This application guide provides detailed instructions for performing safety studies that meet the requirements of DOE Orders 5480.22, open-quotes Technical Safety Requirements,close quotes and 5480.23, open-quotes Nuclear Safety Analysis Reports.close quotes A seven-chapter format has been adopted for safety studies. This format allows for discussion of all the items required by DOE Order 5480.23 and for the discussions to be readily traceable to the listing in the order. The chapter titles are: (1) Introduction and Summary, (2) Site, (3) Facility Description, (4) Safety Basis, (5) Hazardous Material Management, (6) Management, Organization, and Institutional Safety Provisions, and (7) Accident Analysis

A prioritization of generic safety issues

International Nuclear Information System (INIS)

Emrit, R.; Riggs, R.; Milstead, W.; Pittman, J.

1991-07-01

This report presents the priority rankings for generic safety issues and related to nuclear power plants. The purpose of these rankings is to assist in the timely and efficient allocation of NRC resources for the resolution of those safety issues that have a significant potential for reducing risk. The report focuses on the prioritization of generic safety issues. Issues primarily concerned with the licensing process or environmental protection and not directly related to safety have been excluded from prioritization. The prioritized issues include: TMI Action Plan items under development; previously proposed issues covered by Task Action Plans, except issues designated as Un-resolved Safety Issues (USIs) which had already been assigned high priority; and newly-proposed issues. Future supplements to this report will include the prioritization of additional issues. The safety priority rankings are High, Medium, Low, and Drop and have been assigned on the basis of risk significance estimates, the ratio of risk to costs and other impacts estimated to result if resolutions of the safety issues were implemented, and the consideration of uncertainties and other quantitative or qualitative factors. To the extent practical, estimates are quantitative. 1310 refs

A root cause analysis project in a medication safety course.

Science.gov (United States)

Schafer, Jason J

2012-08-10

To develop, implement, and evaluate team-based root cause analysis projects as part of a required medication safety course for second-year pharmacy students. Lectures, in-class activities, and out-of-class reading assignments were used to develop students' medication safety skills and introduce them to the culture of medication safety. Students applied these skills within teams by evaluating cases of medication errors using root cause analyses. Teams also developed error prevention strategies and formally presented their findings. Student performance was assessed using a medication errors evaluation rubric. Of the 211 students who completed the course, the majority performed well on root cause analysis assignments and rated them favorably on course evaluations. Medication error evaluation and prevention was successfully introduced in a medication safety course using team-based root cause analysis projects.

Management of nanomaterials safety in research environment

Directory of Open Access Journals (Sweden)

Riediker Michael

2010-12-01

Full Text Available Abstract Despite numerous discussions, workshops, reviews and reports about responsible development of nanotechnology, information describing health and environmental risk of engineered nanoparticles or nanomaterials is severely lacking and thus insufficient for completing rigorous risk assessment on their use. However, since preliminary scientific evaluations indicate that there are reasonable suspicions that activities involving nanomaterials might have damaging effects on human health; the precautionary principle must be applied. Public and private institutions as well as industries have the duty to adopt preventive and protective measures proportionate to the risk intensity and the desired level of protection. In this work, we present a practical, 'user-friendly' procedure for a university-wide safety and health management of nanomaterials, developed as a multi-stakeholder effort (government, accident insurance, researchers and experts for occupational safety and health. The process starts using a schematic decision tree that allows classifying the nano laboratory into three hazard classes similar to a control banding approach (from Nano 3 - highest hazard to Nano1 - lowest hazard. Classifying laboratories into risk classes would require considering actual or potential exposure to the nanomaterial as well as statistical data on health effects of exposure. Due to the fact that these data (as well as exposure limits for each individual material are not available, risk classes could not be determined. For each hazard level we then provide a list of required risk mitigation measures (technical, organizational and personal. The target 'users' of this safety and health methodology are researchers and safety officers. They can rapidly access the precautionary hazard class of their activities and the corresponding adequate safety and health measures. We succeed in convincing scientist dealing with nano-activities that adequate safety measures and

Management of nanomaterials safety in research environment.

Science.gov (United States)

Groso, Amela; Petri-Fink, Alke; Magrez, Arnaud; Riediker, Michael; Meyer, Thierry

2010-12-10

Despite numerous discussions, workshops, reviews and reports about responsible development of nanotechnology, information describing health and environmental risk of engineered nanoparticles or nanomaterials is severely lacking and thus insufficient for completing rigorous risk assessment on their use. However, since preliminary scientific evaluations indicate that there are reasonable suspicions that activities involving nanomaterials might have damaging effects on human health; the precautionary principle must be applied. Public and private institutions as well as industries have the duty to adopt preventive and protective measures proportionate to the risk intensity and the desired level of protection. In this work, we present a practical, 'user-friendly' procedure for a university-wide safety and health management of nanomaterials, developed as a multi-stakeholder effort (government, accident insurance, researchers and experts for occupational safety and health). The process starts using a schematic decision tree that allows classifying the nano laboratory into three hazard classes similar to a control banding approach (from Nano 3--highest hazard to Nano1--lowest hazard). Classifying laboratories into risk classes would require considering actual or potential exposure to the nanomaterial as well as statistical data on health effects of exposure. Due to the fact that these data (as well as exposure limits for each individual material) are not available, risk classes could not be determined. For each hazard level we then provide a list of required risk mitigation measures (technical, organizational and personal). The target 'users' of this safety and health methodology are researchers and safety officers. They can rapidly access the precautionary hazard class of their activities and the corresponding adequate safety and health measures. We succeed in convincing scientist dealing with nano-activities that adequate safety measures and management are promoting

Core conversion effects on the safety analysis of research reactors

International Nuclear Information System (INIS)

Anoussis, J.N.; Chrysochoides, N.G.; Papastergiou, C.N.

1982-07-01

The safety related parameters of the 5 MW Democritus research reactor that will be affected by the scheduled core conversion to use LEU instead of HEU are considered. The analysis of the safety related items involved in such a core conversion, mainly the consequences due to MCA, DBA, etc., is of a general nature and can, therefore, be applied to other similar pool type reactors as well. (T.A.)

Item Analysis in Introductory Economics Testing.

Science.gov (United States)

Tinari, Frank D.

1979-01-01

Computerized analysis of multiple choice test items is explained. Examples of item analysis applications in the introductory economics course are discussed with respect to three objectives: to evaluate learning; to improve test items; and to help improve classroom instruction. Problems, costs and benefits of the procedures are identified. (JMD)

A review of the effects on IRT item parameter estimates with a focus on misbehaving common items in test equating

Directory of Open Access Journals (Sweden)

Michalis P Michaelides

2010-10-01

Full Text Available Many studies have investigated the topic of change or drift in item parameter estimates in the context of Item Response Theory. Content effects, such as instructional variation and curricular emphasis, as well as context effects, such as the wording, position, or exposure of an item have been found to impact item parameter estimates. The issue becomes more critical when items with estimates exhibiting differential behavior across test administrations are used as common for deriving equating transformations. This paper reviews the types of effects on IRT item parameter estimates and focuses on the impact of misbehaving or aberrant common items on equating transformations. Implications relating to test validity and the judgmental nature of the decision to keep or discard aberrant common items are discussed, with recommendations for future research into more informed and formal ways of dealing with misbehaving common items.

A Review of the Effects on IRT Item Parameter Estimates with a Focus on Misbehaving Common Items in Test Equating.

Science.gov (United States)

Michaelides, Michalis P

2010-01-01

Many studies have investigated the topic of change or drift in item parameter estimates in the context of item response theory (IRT). Content effects, such as instructional variation and curricular emphasis, as well as context effects, such as the wording, position, or exposure of an item have been found to impact item parameter estimates. The issue becomes more critical when items with estimates exhibiting differential behavior across test administrations are used as common for deriving equating transformations. This paper reviews the types of effects on IRT item parameter estimates and focuses on the impact of misbehaving or aberrant common items on equating transformations. Implications relating to test validity and the judgmental nature of the decision to keep or discard aberrant common items are discussed, with recommendations for future research into more informed and formal ways of dealing with misbehaving common items.

Safety investigation of 'Mutsu', the first nuclear ship in Japan (the correspondence to the guideline of safety design examination, etc.)

International Nuclear Information System (INIS)

1981-01-01

Japan Nuclear Ship Development Agency had made previously application for the permission of the alteration of the reactor installation in the nuclear ship Mutsu (the first of this kind in Japan), based on the overall safety investigation of the ship made by JNDA. Taking the opportunity of the governmental safety examination concerning the permission, the correspondence of the safety aspects of the n.s. Mutsu to the existing guidelines for the safety of nuclear reactor facilities was examined. These results to further enhance the safety of the n.s. Mutsu are described concerning the following matters: the safety design examination guideline for power-generating LWR facilities (58 items); the safety evaluation guideline for power-generating LWR facilities (the analysis of abnormal transients during operation and accidents); the safety countermeasures to be adopted in the reactor plant of the n.s. Mutsu from the situation of the TMI nuclear accident in U.S. (7 in design and 10 in operation management); the analysis simulating the TMI accident. (J.P.N.)

A Comparison of the 27-Item and 12-Item Intolerance of Uncertainty Scales

Science.gov (United States)

Khawaja, Nigar G.; Yu, Lai Ngo Heidi

2010-01-01

The 27-item Intolerance of Uncertainty Scale (IUS) has become one of the most frequently used measures of Intolerance of Uncertainty. More recently, an abridged, 12-item version of the IUS has been developed. The current research used clinical (n = 50) and non-clinical (n = 56) samples to examine and compare the psychometric properties of both…

Analysis and Design of Implementation of Class F Airspace in the Czech Republic

Directory of Open Access Journals (Sweden)

Filip Červený

2014-05-01

Full Text Available This article analyses the airspace of the Czech Republic and suggests the implementation of class F airspace in the Czech Republic for IFR flights at uncontrolled aerodromes. It also suggests procedures and technologies for increasing of safety when performing IFR flights at these aerodromes in class F airspace.

Maintenance, surveillance and in-service inspection in nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2002-01-01

Effective maintenance, surveillance and in-service inspection (MS and I) are essential for the safe operation of a nuclear power plant. The objective of this Safety Guide is to provide recommendations and guidance for MS and I activities to ensure that SSCs important to safety are available to perform their functions in accordance with the assumptions and intent of the design. This Safety Guide covers the organizational and procedural aspects of MS and I. However, it does not give detailed technical advice in relation to particular items of plant equipment, nor does it cover inspections made for and/or by the regulatory body. This Safety Guide provides recommendations and guidance for preventive and remedial measures, including testing, surveillance and in-service inspection, that are necessary to ensure that all plant structures, systems and components (SSCs) important to safety are capable of performing as intended. This Safety Guide covers measures for fulfilling the organizational and administrative requirements for: establishing and implementing schedules for preventive and predictive maintenance, repairing defective plant items, selecting and training personnel, providing related facilities and equipment, procuring stores and spare parts, and generating, collecting and retaining maintenance records for establishing and implementing an adequate feedback system for information on maintenance. MS and I should be subject to quality assurance in relation to all aspects important to safety. Quality assurance has been dealt with in detail in other IAEA safety standards and is covered here only in specific instances, for emphasis. In Section 2, a concept of MS and I is presented and the interrelationship between maintenance, surveillance and inspection is discussed. Section 3 concerns the functions and responsibilities of different organizations involved in MS and I activities. Section 4 provides recommendations and guidance on such organizational aspects as

Maintenance, surveillance and in-service inspection in nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2005-01-01

Effective maintenance, surveillance and in-service inspection (MS and I) are essential for the safe operation of a nuclear power plant. The objective of this Safety Guide is to provide recommendations and guidance for MS and I activities to ensure that SSCs important to safety are available to perform their functions in accordance with the assumptions and intent of the design. This Safety Guide covers the organizational and procedural aspects of MS and I. However, it does not give detailed technical advice in relation to particular items of plant equipment, nor does it cover inspections made for and/or by the regulatory body. This Safety Guide provides recommendations and guidance for preventive and remedial measures, including testing, surveillance and in-service inspection, that are necessary to ensure that all plant structures, systems and components (SSCs) important to safety are capable of performing as intended. This Safety Guide covers measures for fulfilling the organizational and administrative requirements for: establishing and implementing schedules for preventive and predictive maintenance, repairing defective plant items, selecting and training personnel, providing related facilities and equipment, procuring stores and spare parts, and generating, collecting and retaining maintenance records for establishing and implementing an adequate feedback system for information on maintenance. MS and I should be subject to quality assurance in relation to all aspects important to safety. Quality assurance has been dealt with in detail in other IAEA safety standards and is covered here only in specific instances, for emphasis. In Section 2, a concept of MS and I is presented and the interrelationship between maintenance, surveillance and inspection is discussed. Section 3 concerns the functions and responsibilities of different organizations involved in MS and I activities. Section 4 provides recommendations and guidance on such organizational aspects as

More is not Always Better: The Relation between Item Response and Item Response Time in Raven’s Matrices

Directory of Open Access Journals (Sweden)

Frank Goldhammer

2015-03-01

Full Text Available The role of response time in completing an item can have very different interpretations. Responding more slowly could be positively related to success as the item is answered more carefully. However, the association may be negative if working faster indicates higher ability. The objective of this study was to clarify the validity of each assumption for reasoning items considering the mode of processing. A total of 230 persons completed a computerized version of Raven’s Advanced Progressive Matrices test. Results revealed that response time overall had a negative effect. However, this effect was moderated by items and persons. For easy items and able persons the effect was strongly negative, for difficult items and less able persons it was less negative or even positive. The number of rules involved in a matrix problem proved to explain item difficulty significantly. Most importantly, a positive interaction effect between the number of rules and item response time indicated that the response time effect became less negative with an increasing number of rules. Moreover, exploratory analyses suggested that the error type influenced the response time effect.

Development of the safety PLC for plant protection system

Energy Technology Data Exchange (ETDEWEB)

Kim, Chang Hwoi; Lee, Dong Young [Korea Atomic Energy Research Institute, Taejeon (Korea, Republic of)

2005-11-15

The safety PLC (POSAFE-Q) is developing in the Korea Nuclear Instrumentation and Control System (KNICS) R and D project. The PLC satisfies Safety Class 1E, Quality Class 1, and Seismic Category I. The software such as RTOS and firmware are developed according to safety critical software life cycle. Especially, the formal method is applied to design SRS (Software Requirement Spec.) and SDS (Software Design Specification.) for error-free. The developed software according to software life cycle is verified by independent software V and V team. The overall response time from an input to the outputs shall be 50ms or less. The prototype for the POSAFE-Q was developed and functional testing and equipment qualification tests have been underway.

[Establish research model of post-marketing clinical safety evaluation for Chinese patent medicine].

Science.gov (United States)

Zheng, Wen-ke; Liu, Zhi; Lei, Xiang; Tian, Ran; Zheng, Rui; Li, Nan; Ren, Jing-tian; Du, Xiao-xi; Shang, Hong-cai

2015-09-01

The safety of Chinese patent medicine has become a focus of social. It is necessary to carry out work on post-marketing clinical safety evaluation for Chinese patent medicine. However, there have no criterions to guide the related research, it is urgent to set up a model and method to guide the practice for related research. According to a series of clinical research, we put forward some views, which contained clear and definite the objective and content of clinical safety evaluation, the work flow should be determined, make a list of items for safety evaluation project, and put forward the three level classification of risk control. We set up a model of post-marketing clinical safety evaluation for Chinese patent medicine. Based this model, the list of items can be used for ranking medicine risks, and then take steps for different risks, aims to lower the app:ds:risksrisk level. At last, the medicine can be managed by five steps in sequence. The five steps are, collect risk signal, risk recognition, risk assessment, risk management, and aftereffect assessment. We hope to provide new ideas for the future research.

Negative effects of item repetition on source memory.

Science.gov (United States)

Kim, Kyungmi; Yi, Do-Joon; Raye, Carol L; Johnson, Marcia K

2012-08-01

In the present study, we explored how item repetition affects source memory for new item-feature associations (picture-location or picture-color). We presented line drawings varying numbers of times in Phase 1. In Phase 2, each drawing was presented once with a critical new feature. In Phase 3, we tested memory for the new source feature of each item from Phase 2. Experiments 1 and 2 demonstrated and replicated the negative effects of item repetition on incidental source memory. Prior item repetition also had a negative effect on source memory when different source dimensions were used in Phases 1 and 2 (Experiment 3) and when participants were explicitly instructed to learn source information in Phase 2 (Experiments 4 and 5). Importantly, when the order between Phases 1 and 2 was reversed, such that item repetition occurred after the encoding of critical item-source combinations, item repetition no longer affected source memory (Experiment 6). Overall, our findings did not support predictions based on item predifferentiation, within-dimension source interference, or general interference from multiple traces of an item. Rather, the findings were consistent with the idea that prior item repetition reduces attention to subsequent presentations of the item, decreasing the likelihood that critical item-source associations will be encoded.

Safety culture in a pharmacy setting using a pharmacy survey on patient safety culture: a cross-sectional study in China.

Science.gov (United States)

Jia, P L; Zhang, L H; Zhang, M M; Zhang, L L; Zhang, C; Qin, S F; Li, X L; Liu, K X

2014-06-30

To explore the attitudes and perceptions of patient safety culture for pharmacy workers in China by using a Pharmacy Survey on Patient Safety Culture (PSOPSC), and to assess the psychometric properties of the translated Chinese language version of the PSOPSC. Cross-sectional study. Data were obtained from 20 hospital pharmacies in the southwest part of China. We performed χ(2) test to explore the differences on pharmacy staff in different hospital and qualification levels and countries towards patient safety culture. We also computed descriptive statistics, internal consistency coefficients and intersubscale correlation analysis, and then conducted an exploratory factor analysis. A test-retest was performed to assess reproducibility of the items. A total of 630 questionnaires were distributed of which 527 were responded to validly (response rate 84%). The positive response rate for each item ranged from 37% to 90%. The positive response rate on three dimensions ('Teamwork', 'Staff Training and Skills' and 'Staffing, Work Pressure and Pace') was higher than that of Agency for Healthcare Research and Quality (AHRQ) data (pculture at different hospital and qualification levels. The internal consistency of the total survey was comparatively satisfied (Cronbach's α=0.89). The results demonstrated that among the pharmacy staffs surveyed in China, there was a positive attitude towards patient safety culture in their organisations. Identifying perspectives of patient safety culture from pharmacists in different hospital and qualification levels are important, since this can help support decisions about action to improve safety culture in pharmacy settings. The Chinese translation of the PSOPSC questionnaire (V.2012) applied in our study is acceptable. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Belgian class II nuclear facilities such as irradiators and accelerators. Regulatory Body attention points and operating experience feedback

Energy Technology Data Exchange (ETDEWEB)

Minne, Etienne; Peters, Christelle; Mommaert, Chantal; Kennes, Christian; Cortenbosch, Geert; Schmitz, Frederic; Haesendonck, Michel van [Bel V, Brussels (Belgium); Carlier, Pascal; Schrayen, Virginie; Wertelaers, An [Federal Agency for Nuclear Control, Brussels (Belgium)

2016-11-15

The aim of this paper is to present the Regulatory Body attention points and the operating experience feedback from Belgian ''class IIA'' facilities such as industrial and research irradiators, bulk radionuclides producers and conditioners. Reinforcement of the nuclear safety and radiation protection has been promoted by the Federal Agency for Nuclear Control (FANC) since 2009. This paper is clearly a continuation of the former paper [1] presenting the evolution in the regulatory framework relative to the creation of Bel V, the subsidiary of the FANC, and to the new ''class IIA'' covering heavy installations such as those mentioned above. Some lessons learnt are extracted from the operating experience feedback based on the events declared to the authorities. Even though a real willingness to meet the new safety requirements is observed among the ''class IIA'' licensees, promoting the safety culture, the nuclear safety and radiation protection remains an endless challenge for the Regulatory Body.

Examination of the PROMIS upper extremity item bank.

Science.gov (United States)

Hung, Man; Voss, Maren W; Bounsanga, Jerry; Crum, Anthony B; Tyser, Andrew R

Clinical measurement. The psychometric properties of the PROMIS v1.2 UE item bank were tested on various samples prior to its release, but have not been fully evaluated among the orthopaedic population. This study assesses the performance of the UE item bank within the UE orthopaedic patient population. The UE item bank was administered to 1197 adult patients presenting to a tertiary orthopaedic clinic specializing in hand and UE conditions and was examined using traditional statistics and Rasch analysis. The UE item bank fits a unidimensional model (outfit MNSQ range from 0.64 to 1.70) and has adequate reliabilities (person = 0.84; item = 0.82) and local independence (item residual correlations range from -0.37 to 0.34). Only one item exhibits gender differential item functioning. Most items target low levels of function. The UE item bank is a useful clinical assessment tool. Additional items covering higher functions are needed to enhance validity. Supplemental testing is recommended for patients at higher levels of function until more high function UE items are developed. 2c. Copyright © 2016 Hanley & Belfus. Published by Elsevier Inc. All rights reserved.

Angra-1 probabilistic safety study-phase B

International Nuclear Information System (INIS)

Fernandes Filho, T.L.; Gibelli, S.M.O.

1988-05-01

This study represents the Phase B of the Angra-1 Probabilistic Safety Study and is the the final report prepared for the IAEA under Research Contract No. 3423/R2/RB. The three main items covered in this report are the establishment of interim safety goals, analysis of Angra-1 operational experience and development of emergency procedures to address severe accidents. For establishment of interim safety goals a methodology for calculating consequences and risks associated to the Angra-1 operation was developed based on the available data and codes. The proposed safety goals refer to the individual risk of early fatality for people living in the vicinity of the plant, colective risk of cancer fatalities for people living near the plant, the propobability of core melt occurrence and the probability of dominant accident sequences. (author) [pt

Psychometric Consequences of Subpopulation Item Parameter Drift

Science.gov (United States)

Huggins-Manley, Anne Corinne

2017-01-01

This study defines subpopulation item parameter drift (SIPD) as a change in item parameters over time that is dependent on subpopulations of examinees, and hypothesizes that the presence of SIPD in anchor items is associated with bias and/or lack of invariance in three psychometric outcomes. Results show that SIPD in anchor items is associated…

Location Indices for Ordinal Polytomous Items Based on Item Response Theory. Research Report. ETS RR-15-20

Science.gov (United States)

Ali, Usama S.; Chang, Hua-Hua; Anderson, Carolyn J.

2015-01-01

Polytomous items are typically described by multiple category-related parameters; situations, however, arise in which a single index is needed to describe an item's location along a latent trait continuum. Situations in which a single index would be needed include item selection in computerized adaptive testing or test assembly. Therefore single…

Safety methodology and risk targets

International Nuclear Information System (INIS)

Kazimi, M.S.

1983-01-01

In assessing the potential safety concerns of fusion, the experience from other energy sources lead to a variety of safety assessment approaches. The available approaches are: (1) The maximum possible accident approach; (2) The maximum credible accident approach; (3) The probabilistic total risk assessment. In the first approach, the mechanistic development of the events leading to the safety concern is ignored. Instead, the total radioactivity of the plant is assumed accessible to the public. Such an approach is obviously conservative and unrealistic. In the second approach a selection is made among the most severe of the possible accidents, and the progression of the accident is modeled as mechanistically as possible. In this case, the passive and active accident mitigation capabilities of the plant are taken into consideration. The result is expected to be that none or only a fraction of the total radioactivity can be released to the public. The adverse effect of this approach is to concentrate attention on a particular accident class, and perhaps not allow for other classes, a judgement that may later become undesirable. The probabilistic risk assessment requires the safety analysts to consider all classes of accidents and estimate both the probabilities of their occurrences and their consequences. Thus, the plant design in fact is subjected to a thorough investigation and the impact of alterations in design can be reflected in the total risk estimate. The disadvantage of this approach lies in the absence of well defined acceptable risk criteria as well as the large effect of public perception factors on the accepted risk. This paper will review the impact of application of these approaches in determination of the level of protection needed against activation product release to the atmosphere. (author)

Application of quality assurance program to safety related aging equipment or components

International Nuclear Information System (INIS)

Papaiya, N.C.

1990-01-01

This paper addresses how quality assurance programs and their criteria are applied to safety related and aging equipment or components used in commercial nuclear plant applications. The QA Programs referred to are 10CFR50 Appendix B and EPRI NP-5652. The QA programs as applicable are applied to equipment/component aging qualification, preventive maintenance, surveillance testing and procurement engineering. The intent of this paper is not the technical issues, methods and research of aging. The paper addresses QA program's application to age-related equipment or components in safety related applications. Quality Assurance Program 10CFR50 Appendix B applies to all safety related aging components or equipment related to the qualification program and associated preventive maintenance and surveillance testing programs. Quality Assurance involvement with procurement engineering for age-related commercial grade items supports EPRI NP-5652 and assures that the dedicated OGI is equal to the item purchased as a basic component to 10CFR50 Appendix B requirements

Few items in the thyroid-related quality of life instrument ThyPRO exhibited differential item functioning.

Science.gov (United States)

Watt, Torquil; Groenvold, Mogens; Hegedüs, Laszlo; Bonnema, Steen Joop; Rasmussen, Åse Krogh; Feldt-Rasmussen, Ulla; Bjorner, Jakob Bue

2014-02-01

To evaluate the extent of differential item functioning (DIF) within the thyroid-specific quality of life patient-reported outcome measure, ThyPRO, according to sex, age, education and thyroid diagnosis. A total of 838 patients with benign thyroid diseases completed the ThyPRO questionnaire (84 five-point items, 13 scales). Uniform and nonuniform DIF were investigated using ordinal logistic regression, testing for both statistical significance and magnitude (∆R(2) > 0.02). Scale level was estimated by the sum score, after purification. Twenty instances of DIF in 17 of the 84 items were found. Eight according to diagnosis, where the goiter scale was the one most affected, possibly due to differing perceptions in patients with auto-immune thyroid diseases compared to patients with simple goiter. Eight DIFs according to age were found, of which 5 were in positively worded items, which younger patients were more likely to endorse; one according to gender: women were more likely to report crying, and three according to educational level. The vast majority of DIF had only minor influence on the scale scores (0.1-2.3 points on the 0-100 scales), but two DIF corresponded to a difference of 4.6 and 9.8, respectively. Ordinal logistic regression identified DIF in 17 of 84 items. The potential impact of this on the present scales was low, but items displaying DIF could be avoided when developing abbreviated scales, where the potential impact of DIF (due to fewer items) will be larger.

Loglinear multidimensional IRT models for polytomously scired Items

NARCIS (Netherlands)

Kelderman, Henk

1988-01-01

A loglinear item response theory (IRT) model is proposed that relates polytomously scored item responses to a multidimensional latent space. Each item may have a different response function where each item response may be explained by one or more latent traits. Item response functions may follow a

75 FR 35516 - Pipeline Safety: Request for Special Permit