Feasibility, Safety, and Efficacy of an Alternative Schedule of Sunitinib for the Treatment of Patients with Metastatic Renal Cell Carcinoma: A Retrospective Study.

Science.gov (United States)

Buti, Sebastiano; Donini, Maddalena; Bersanelli, Melissa; Gattara, Alessia; Leonardi, Francesco; Passalacqua, Rodolfo

2017-12-01

Standard treatment with sunitinib for patients with metastatic renal cancer provides an 'on-off' schedule (daily administration of a 50-mg capsule for 4 weeks, followed by a 2-week break; consecutive 6-week cycles). We developed an alternative intermittent schedule to reduce the toxicity and symptoms of tumor regrowth during the rest period and to allow prolonged continuation of therapy, maintaining dose intensity. The objective of this study was to provide a retrospective evaluation of the feasibility, safety, and efficacy of an alternative schedule of sunitinib in patients who did not tolerate classical treatment. Patients treated with the classical schedule with at least grade 2 toxicity or recurrence of symptoms during the rest period were switched to an alternative schedule (the same daily dose 5 consecutive days per week for 5 weeks and then the same daily dose on days 1, 3, and 5 in the sixth week; consecutive 6-week cycles). Twenty-five patients were enrolled. The median time from sunitinib initiation to schedule switch was 2.9 months. After the switch, the median therapy duration was 9.2 months. Rate of delay, corrected by cycle number, was 10% for both schedules. After the switch, 48.7% of patients obtained a toxicity reduction (hypertension -82%, stomatitis -71%, cutaneous toxicity -69%). A reduction in 'on-off symptoms' (-86%) was achieved. Overall response rate was 40% and the disease control rate was 80%. Median progression-free survival was 16.4 months and median overall survival was 41.3 months. Despite the small sample size and retrospective nature, we demonstrated the feasibility, safety, and efficacy of the alternative schedule, allowing prolonged treatment and better quality of life.

Project on Alternative Systems Study - PASS. Final report

International Nuclear Information System (INIS)

1992-10-01

Alternative repository systems for deep disposal of spent fuel and different types of canisters are studied regarding technical aspects in Project on Alternative System Study (PASS). The objective is to present a ranking of repository systems as well as of canister types for each system. The studies and compared systems are: KBS-3, Medium Long Tunnels (MLH), Long tunnels (VLH) and Deep Boreholes (VDH). For KBS-3 and MLH five canister types are compared (copper/steel, copper/lead, copper (HIP), steel/lead and steel), for VLH two types (copper/steel and steel), and for VDH three types (titanium/concrete with non-consolidated fuel assemblies, titanium/concrete with consolidated assemblies and copper (HIP) with non-consolidated assemblies). The comparison is separated into three sub-comparisons (Technology, Long-term performance and safety, and Costs), which eventually are merged into one ranking. With respect to canister alternatives the result is that the copper/steel canister is ranked first for KBS-3, MLH and VLH, while the titanium/concrete canister is ranked first for VDH (non-consolidated as well as consolidated assemblies. With these canister alternatives the merged ranking of repository systems results in placing KBS-3 slightly in front of MLH. VLH comes thereafter and VDH last. (32 refs.)

Safety relief valve alternate analysis method

International Nuclear Information System (INIS)

Adams, R.H.; Javid, A.; Khatua, T.P.

1981-01-01

An experimental test program was started in the United States in 1976 to define and quantify Safety Relief Valve (SRV) phenomena in General Electric Mark I Suppression Chambers. The testing considered several discharged devices and was used to correlate SRV load prediction models. The program was funded by utilities with Mark I containments and has resulted in a detailed SRV load definition as a portion of the Mark I containment program Load Definition Report (LDR). The (USNRC) has reviewed and approved the LDR SRV load definition. In addition, the USNRC has permitted calibration of structural models used for predicting torus response to SRV loads. Model calibration is subject to confirmatory in-plant testing. The SRV methodology given in the LDR requires that transient dynamic pressures be applied to a torus structural model that includes a fluid added mass matrix. Preliminary evaluations of torus response have indicated order of magnitude conservatisms, with respect to test results, which could result in unrealistic containment modifications. In addition, structural response trends observed in full-scale tests between cold pipe, first valve actuation and hot pipe, subsequent valve actuation conditions have not been duplicated using current analysis methods. It was suggested by others that an energy approach using current fluid models be utilized to define loads. An alternate SRV analysis method is defined to correct suppression chamber structural response to a level that permits economical but conservative design. Simple analogs are developed for the purpose of correcting the analytical response obtained from LDR analysis methods. Analogs evaluated considered forced vibration and free vibration structural response. The corrected response correlated well with in-plant test response. The correlation of the analytical model at test conditions permits application of the alternate analysis method at design conditions. (orig./HP)

Independent safety organization

International Nuclear Information System (INIS)

Kato, W.Y.; Weinstock, E.V.; Carew, J.F.; Cerbone, R.J.; Guppy, J.G.; Hall, R.E.; Taylor, J.H.

1985-01-01

Brookhaven National Laboratory has conducted a study on the need and feasibility of an independent organization to investigate significant safety events for the Office for Analysis and Evaluation of Operational Data, USNRC. The study consists of three parts: the need for an independent organization to investigate significant safety events, alternative organizations to conduct investigations, and legislative requirements. The determination of need was investigated by reviewing current NRC investigation practices, comparing aviation and nuclear industry practices, and interviewing a spectrum of representatives from the nuclear industry, the regulatory agency, and the public sector. The advantages and disadvantages of alternative independent organizations were studied, namely, an Office of Nuclear Safety headed by a director reporting to the Executive Director for Operations (EDO) of NRC; an Office of Nuclear Safety headed by a director reporting to the NRC Commissioners; a multi-member NTSB-type Nuclear Safety Board independent of the NRC. The costs associated with operating a Nuclear Safety Board were also included in the study. The legislative requirements, both new authority and changes to the existing NRC legislative authority, were studied. 134 references

Alternative biosphere modeling for safety assessment of HLW disposal taking account of geosphere-biosphere interface of marine environment

International Nuclear Information System (INIS)

Kato, Tomoko; Ishiguro, Katsuhiko; Naito, Morimasa; Ikeda, Takao; Little, Richard

2001-03-01

In the safety assessment of a high-level radioactive waste (HLW) disposal system, it is required to estimate radiological impacts on future human beings arising from potential radionuclide releases from a deep repository into the surface environment. In order to estimated the impacts, a biosphere model is developed by reasonably assuming radionuclide migration processes in the surface environment and relevant human lifestyles. It is important to modify the present biosphere models or to develop alternative biosphere models applying the biosphere models according to quality and quantify of the information acquired through the siting process for constructing the repository. In this study, alternative biosphere models were developed taking geosphere-biosphere interface of marine environment into account. Moreover, the flux to dose conversion factors calculated by these alternative biosphere models was compared with those by the present basic biosphere models. (author)

Safety and Efficacy of transarterial nephrectomy as an alternative to surgical nephrectomy

International Nuclear Information System (INIS)

Cho, Jooae; Shin, Ji Hoon; Yoon, Hyun Ki; Ko, Gi Young; Gwon, Dong Il; Ko, Heung Kyu; Kim, Jin Hyoung; Sung, Kyu Bo

2014-01-01

To evaluate the safety and efficacy of transarterial nephrectomy, i.e., complete renal artery embolization, as an alternative to surgical nephrectomy. This retrospective study included 11 patients who underwent transarterial nephrectomy due to a high risk of surgical nephrectomy or their refusal to undergo surgery during the period from April 2002 to February 2013. Medical records and radiographic images were reviewed retrospectively to collect information regarding underlying etiologies, clinical presentations and embolization outcomes. The underlying etiologies for transarterial nephrectomy included recurrent hematuria (chronic transplant rejection [n = 3], arteriovenous malformation or fistula [n = 3], angiomyolipoma [n = 1], or end-stage renal disease [n = 1]), inoperable renal or ureteral injury (n = 2), and ectopic kidney with urinary incontinence (n 1). The technical success rate was 100%, while clinical success was achieved in eight patients (72.7%). Subsequent surgical nephrectomy was required for three patients due to an incomplete nephrectomy effect (n = 2) or necrotic pyelonephritis (n = 1). Procedure-related complications were post-infarction syndrome in one patient and necrotic pyelonephritis in another patient. Of four patients with follow-up CT, four showed renal atrophy and two showed partial renal enhancement. No patient developed a procedure-related hypertension. Transarterial nephrectomy may be a safe and effective alternative to surgical nephrectomy in patients with high operative risks.

Safety and Efficacy of transarterial nephrectomy as an alternative to surgical nephrectomy

Energy Technology Data Exchange (ETDEWEB)

Cho, Jooae; Shin, Ji Hoon; Yoon, Hyun Ki; Ko, Gi Young; Gwon, Dong Il; Ko, Heung Kyu; Kim, Jin Hyoung; Sung, Kyu Bo [Dept. of Radiology and Research Institute of Radiology, Asan Medical Center, University of Ulsan College of Medicine, Seoul (Korea, Republic of)

2014-08-15

To evaluate the safety and efficacy of transarterial nephrectomy, i.e., complete renal artery embolization, as an alternative to surgical nephrectomy. This retrospective study included 11 patients who underwent transarterial nephrectomy due to a high risk of surgical nephrectomy or their refusal to undergo surgery during the period from April 2002 to February 2013. Medical records and radiographic images were reviewed retrospectively to collect information regarding underlying etiologies, clinical presentations and embolization outcomes. The underlying etiologies for transarterial nephrectomy included recurrent hematuria (chronic transplant rejection [n = 3], arteriovenous malformation or fistula [n = 3], angiomyolipoma [n = 1], or end-stage renal disease [n = 1]), inoperable renal or ureteral injury (n = 2), and ectopic kidney with urinary incontinence (n 1). The technical success rate was 100%, while clinical success was achieved in eight patients (72.7%). Subsequent surgical nephrectomy was required for three patients due to an incomplete nephrectomy effect (n = 2) or necrotic pyelonephritis (n = 1). Procedure-related complications were post-infarction syndrome in one patient and necrotic pyelonephritis in another patient. Of four patients with follow-up CT, four showed renal atrophy and two showed partial renal enhancement. No patient developed a procedure-related hypertension. Transarterial nephrectomy may be a safe and effective alternative to surgical nephrectomy in patients with high operative risks.

A tiered approach to the use of alternatives to animal testing for the safety assessment of cosmetics: skin irritation.

Science.gov (United States)

Macfarlane, Martin; Jones, Penny; Goebel, Carsten; Dufour, Eric; Rowland, Joanna; Araki, Daisuke; Costabel-Farkas, Margit; Hewitt, Nicola J; Hibatallah, Jalila; Kirst, Annette; McNamee, Pauline; Schellauf, Florian; Scheel, Julia

2009-07-01

Evaluation of the skin irritancy and corrosivity potential of an ingredient is a necessity in the safety assessment of cosmetic ingredients. To date, there are two formally validated alternatives to the rabbit Draize test for skin corrosivity in place, namely the rat skin transcutaneous electrical resistance (TER) assay and the Human Skin Model Test using EpiSkin, EpiDerm and SkinEthic reconstructed human epidermal equivalents. For skin irritation, EpiSkin, EpiDerm and SkinEthic are validated as stand-alone test replacements for the rabbit Draize test. Data from these tests are rarely considered in isolation and are evaluated in combination with other factors to establish the overall irritating or corrosive potential of an ingredient. In light of the deadlines established in the Cosmetics Directive for cessation of animal testing for cosmetic ingredients, a COLIPA scientific meeting was held in Brussels on 30th January, 2008 to review the use of alternative approaches and to set up a decision tree approach for their integration into tiered testing strategies for hazard and safety assessment of cosmetic ingredients and their use in products. In conclusion, the safety assessments for skin irritation/corrosion of new chemicals for use in cosmetics can be confidently accomplished using exclusively alternative methods.

Comparative health and safety assessment of alternative future electrical-generation systems

International Nuclear Information System (INIS)

Habegger, L.J.; Gasper, J.R.; Brown, C.D.

1980-01-01

The report is an analysis of health and safety risks of seven alternative electrical generation systems, all of which have potential for commercial availability in the post-2000 timeframe. The systems are compared on the basis of expected public and occupational deaths and lost workdays per year associated with 1000 MWe average unit generation. Risks and their uncertainties are estimated for all phases of the energy production cycle, including fuel and raw material extraction and processing, direct and indirect component manufacture, on-site construction, and system operation and maintenance. Also discussed is the potential significance of related major health and safety issues that remain largely unquantifiable. The technologies include: the SPS; a low-Btu coal gasification system with an open-cycle gas turbine combined with a steam topping cycle (CG/CC); a light water fission reactor system without fuel reprocessing (LWR); a liquid metal fast breeder fission reactor system (LMFBR); a central station terrestrial photovoltaic system (CTPV); and a first generation fusion system with magnetic confinement. For comparison with the baseload technologies, risk from a decentralized roof-top photovoltaic system with 6 kWe peak capacity and battery storage (DTPV) was also evaluated

Promotion of alternative-sized personal protective equipment.

Science.gov (United States)

Flynn, Michael A; Keller, Brenna; DeLaney, Sheli C

2017-12-01

With more diversity in the workforce, companies are producing PPE such as hard hats, safety glasses, coveralls, foot protection, and safety harnesses for a larger range of body shapes and sizes. However, gray literature reports suggest that barriers exist to getting alternate sized PPE from the manufacturer to the workers who need it. The purpose of this study is to determine the extent to which alternative-sized PPE is marketed. A web-based review of seven major manufacturers of PPE was conducted to determine: (a) whether or not they offer alternative-sized products, (b) if these products are clearly labeled, and (c) if images used to display PPE are representative of a diverse workforce. Of the seven PPE manufacturers investigated, six had at least one product that was marketed as gender and/or size alternatives however, alternative sizes were more common for larger body types. Alternative-sized products rarely included size charts, and the models used to display PPE were overwhelmingly white males of average size. Despite the growing availability of alternative-sized PPE, it can be difficult to find these products, which suggests that they are rarely promoted or labeled as alternative-sized. Our study indicates that companies should expand their product lines and more aggressively market and promote these items. Guidance on how to properly fit their products would also be extremely helpful to the end-user. Manufacturers could improve the availability of alternative-sized PPE and increase their promotion of these products on their websites and in their catalogs. Individual companies and safety professionals may assist in this process by demonstrating demand for alternative-sized PPE. Published by Elsevier Ltd.

Nuclear proliferation and civilian nuclear power. Report of the Nonproliferation Alternative Systems Assessment Program. Volume VI. Safety and environmental considerations for licensing

International Nuclear Information System (INIS)

1980-06-01

This volume of the Nonproliferation Alternative Systems Assessment Program report addresses safety and environmental considerations in licensing the principal alternative nuclear reactors and fuel cycles in the United States for large-scale commercial nuclear power plants. In addition, this volume examines the safety and environmental considerations for licensing fuel service centers. These centers, which have been proposed for controlling sensitive fuel-cycle facilities and special nuclear materials, would contain a combination of such facilities as reprocessing plants, fabrication plants, and reactors. For this analysis, two fuel service center concepts were selected - one with power - generating capability and one without

Seal design alternatives study

International Nuclear Information System (INIS)

Van Sambeek, L.L.; Luo, D.D.; Lin, M.S.; Ostrowski, W.; Oyenuga, D.

1993-06-01

This report presents the results from a study of various sealing alternatives for the WIPP sealing system. Overall, the sealing system has the purpose of reducing to the extent possible the potential for fluids (either gas or liquid) from entering or leaving the repository. The sealing system is divided into three subsystems: drift and panel seals within the repository horizon, shaft seals in each of the four shafts, and borehole seals. Alternatives to the baseline configuration for the WIPP seal system design included evaluating different geometries and schedules for seal component installations and the use of different materials for seal components. Order-of-magnitude costs for the various alternatives were prepared as part of the study. Firm recommendations are not presented, but the advantages and disadvantages of the alternatives are discussed. Technical information deficiencies are identified and studies are outlined which can provide required information

Assessment of alternative disposal concepts

Energy Technology Data Exchange (ETDEWEB)

Autio, J.; Saanio, T.; Tolppanen, P. [Saanio and Riekkola Consulting Engineers, Helsinki (Finland); Raiko, H.; Vieno, T. [VTT Energy, Espoo (Finland); Salo, J.P. [Posiva Oy, Helsinki (Finland)

1996-12-01

Four alternative repository designs for the disposal of spent nuclear in the Finnish crystalline bedrock were assessed in the study. The alternatives were: (1) the basic KBS-3 design in which copper canisters are emplaced in vertical deposition holes bored in the floors of horizontal tunnels, (2) the KBS-3-2C design with two canisters in a deposition hole, (3) Short Horizontal Holes (SHH) in the side walls of the tunnels, and (4) the Medium Long Holes (MLH) concept in which approximately 25 canisters are emplaced in a horizontal deposition hole about 200 metres in length bored between central and side tunnels. In all the alternatives considered, the thickness of the layer of compacted bentonite between copper canister and bedrock is 35 cm. Two different copper canister designs were also assessed. Technical feasibility and flexibility, post-closure safety and repository cost were assessed for each of the alternative canister and repository designs. On the basis of this assessment it is recommended that further development and studies should focus on the vacuum- or inert gas-filled cast insert type copper canister and the basic KBS-3 type repository design with a single canister in a vertical deposition hole. The KBS-3 design is robust and flexible and provides excellent post-closure safety. The transfer, emplacement and sealing operations are technically uncomplicated. The alternative options assessed do not offer any significant benefits in safety or cost over the basic design, but they are technically more complex and also in some respects more vulnerable to malfunction during the emplacement of canisters and buffer, as well as common mode failures. (60 refs.).

Assessment of alternative disposal concepts

International Nuclear Information System (INIS)

Autio, J.; Saanio, T.; Tolppanen, P.; Raiko, H.; Vieno, T.; Salo, J.P.

1996-12-01

Four alternative repository designs for the disposal of spent nuclear in the Finnish crystalline bedrock were assessed in the study. The alternatives were: (1) the basic KBS-3 design in which copper canisters are emplaced in vertical deposition holes bored in the floors of horizontal tunnels, (2) the KBS-3-2C design with two canisters in a deposition hole, (3) Short Horizontal Holes (SHH) in the side walls of the tunnels, and (4) the Medium Long Holes (MLH) concept in which approximately 25 canisters are emplaced in a horizontal deposition hole about 200 metres in length bored between central and side tunnels. In all the alternatives considered, the thickness of the layer of compacted bentonite between copper canister and bedrock is 35 cm. Two different copper canister designs were also assessed. Technical feasibility and flexibility, post-closure safety and repository cost were assessed for each of the alternative canister and repository designs. On the basis of this assessment it is recommended that further development and studies should focus on the vacuum- or inert gas-filled cast insert type copper canister and the basic KBS-3 type repository design with a single canister in a vertical deposition hole. The KBS-3 design is robust and flexible and provides excellent post-closure safety. The transfer, emplacement and sealing operations are technically uncomplicated. The alternative options assessed do not offer any significant benefits in safety or cost over the basic design, but they are technically more complex and also in some respects more vulnerable to malfunction during the emplacement of canisters and buffer, as well as common mode failures. (60 refs.)

Alternatives for radioactive waste management

International Nuclear Information System (INIS)

Bartlett, J.W.

1975-10-01

The safety aspects of waste management alternatives are emphasized. The options for waste management, their safety characteristics, and the methods that might be used to evaluate the options and their safety are outlined

Complementary and Alternative Medicine in the Pediatrics with Leukemia: A Narrative Review Study

Directory of Open Access Journals (Sweden)

Mojtaba Miladinia

2017-01-01

Full Text Available BackgroundFor using of complementary and alternative medicine methods (CAM in the leukemia pediatrics than other types of cancer, we have two great challenges; first challenge is their safety and risks and second challenge is study gaps in this field. Regarding to these challenges, this study is a narrative review of some CAM methods in the leukemia pediatrics from the perspective of their safety, risks and study gaps.Materials and MethodsIn this narrative review study searched both international electronic databases including ISI Web of science, PubMed, PsycINFO, CINAHL, ISC, Embase, Scopus, Google Scholar and also, Iranian electronic databases including Magiran, Medlib and SID. Also, searches were performed separately in the specialized journals in the field of leukemia pediatrics and complementary and alternative medicine research.ResultsMusic therapy, gentle yoga movements, gentle massage types are quite safe for leukemia pediatrics. But, use of heavy yoga movements, massages with deep pressure, acupressure and acupuncture can be dangerous for leukemia pediatrics (risks of bleeding and or infection. Also, this study showed that, the number of investigations about the use of CAM in the leukemia pediatrics is very limited; especially in the field of yoga and acupuncture.ConclusionThe results of this study can be a basis both for chose of safe CAM method in these children and a basis for future studies on the basis of identified study gaps in this review study.

Safety study application guide

International Nuclear Information System (INIS)

1993-07-01

Martin Marietta Energy Systems, Inc., (Energy Systems) is committed to performing and documenting safety analyses for facilities it manages for the Department of Energy (DOE). Included are analyses of existing facilities done under the aegis of the Safety Analysis Report Upgrade Program, and analyses of new and modified facilities. A graded approach is used wherein the level of analysis and documentation for each facility is commensurate with the magnitude of the hazard(s), the complexity of the facility and the stage of the facility life cycle. Safety analysis reports (SARs) for hazard Category 1 and 2 facilities are usually detailed and extensive because these categories are associated with public health and safety risk. SARs for Category 3 are normally much less extensive because the risk to public health and safety is slight. At Energy Systems, safety studies are the name given to SARs for Category 3 (formerly open-quotes lowclose quotes) facilities. Safety studies are the appropriate instrument when on-site risks are limited to irreversible consequences to a few people, and off-site consequences are limited to reversible consequences to a few people. This application guide provides detailed instructions for performing safety studies that meet the requirements of DOE Orders 5480.22, open-quotes Technical Safety Requirements,close quotes and 5480.23, open-quotes Nuclear Safety Analysis Reports.close quotes A seven-chapter format has been adopted for safety studies. This format allows for discussion of all the items required by DOE Order 5480.23 and for the discussions to be readily traceable to the listing in the order. The chapter titles are: (1) Introduction and Summary, (2) Site, (3) Facility Description, (4) Safety Basis, (5) Hazardous Material Management, (6) Management, Organization, and Institutional Safety Provisions, and (7) Accident Analysis

Nuclear proliferation and civilian nuclear power: report of the Nonproliferation Alternative Systems Assessment Program. Volume VI. Safety and environmental considerations for licensing

International Nuclear Information System (INIS)

1979-12-01

Volume 6 of the Nonproliferation Alternative Systems Assessment Program report addresses safety and environmental considerations in licensing the principal alternative nuclear reactors and fuel cycles in the United States for large-scale commercial nuclear power plants. In addition, this volume examines the safety and environmental considerations for licensing fuel service centers. These centers, which have been proposed for controlling sensitive fuel-cycle facilities and special nuclear materials, would contain a combination of such facilities as reprocessing plants, fabrication plants, and reactors. For this analysis, two fuel service center concepts were selected - one with power-generating capability and one without. This volume also provides estimates of the time required for development of large-scale commercial reactor systems to reach the construction permit application stage and for fuel-cycle facilities to reach the operating license application stage, which is a measure of the relative technical status of alternative nuclear systems

Alternative development and action plan for the atomic safety regulation instruments

International Nuclear Information System (INIS)

Kim, J. Y.; Ahn, S. K.; Ham, Y. S.

2004-01-01

The goal of this study to provide highly practical model to regulation agency. Since nuclear power safety regulation has different characteristics, compared to general regulation, it is important to have new point of view and approach. But application possibility for regulation that guarantees the 'perfect safety' is very low. Therefore, it is important establish nuclear power safety regulation that is realistic as well as safety securing. In order to establish high quality regulation, evaluation of existing regulation must be done first. Thus in this study, 6 standards to evaluate existing regulation are suggested. They are clearness, efficiency, flexibility, reliability, responsibility and political consideration. Also, strategies to complement the weak points of regulatory governance, regulatory sunset, regulatory map, regulatory negotiation, regulatory benefit cost analysis, etc. These strategies can be applied all in one regulation, and can strategically be selected for application. After analyzing the result if case analysis on nuclear furnace regulation for research study, agreement was made that it is most efficient to consider in the order if clearness reliability, flexibility, confidence, political consideration, administrative efficiency and economic efficiency

Acceptable risk in reactor safety studies

International Nuclear Information System (INIS)

Benjamin, J.R.; Shinozuka, M.; Shah, H.C.

1975-01-01

Acceptable risk is defined in terms of its five basic parameters: the hazard or problem; the probability of occurrence; the consequence; the possible alternative actions; and the value system of the community or the society. The problem of consistency in design at a site and between differing sites is discussed and solutions are suggested. Techniques for consistent deterministic and probabilistic setting limits and design standards are illustrated using data from AEC Reactor Safety Study, WASH-1400. The influence of level of consequence is discussed and a general methodology for decision analysis in resource allocation problem is briefly introduced and illustrated. The concept of acceptable risk is put in a quantitative format that can be used by engineers and planners. Bayesian statistical methods are introduced to develop the methodologies

Safety Management. An Introduction to a Frame of Reference Exemplified with Case Studies from Non-Nuclear Contexts

Energy Technology Data Exchange (ETDEWEB)

Svensson, Ola (Risk Analysis, Social and Decision Research Unit, Dept. of Psychology, Stockholm Univ., Stockholm (Sweden)); Salo, Ilkka (Dept. of Psychology, Lund Univ., Lund (Sweden))

2004-11-15

A systems perspective on safety management is introduced followed by two briefly presented case studies of safety management in non-nuclear contexts. The first study concerns a car manufacturer and the second study a road traffic tunnel system. The risks of a car accident in the first case study are evident. The great exposure generates many incidents and accidents. In the second study, the rather low traffic intensity through the tunnel produces few incidents and accidents and only a few fatal accidents over the years. Yet, the risk of the individual traveler is much greater in the tunnel than on the average road. The case studies are presented in a systems perspective with emphasis on information feedback about the risks of the systems. The first case study illustrates high quality safety management, while the second case study shows many weaknesses of the safety management in the tunnel system. Some differences in safety management between the case studies are noted. The last part of the study presents an organizational perspective on safety management and offers alternative theoretical perspectives on the concept of safety management. The report shows that further studies are needed both (1) to develop a frame of reference for describing safety management across industries and activities and (2) to collect data illustrating of good and poor safety management. Then, the results can be used to strengthen and/or improving safety management in the nuclear power industry and its regulators

Safety Management. An Introduction to a Frame of Reference Exemplified with Case Studies from Non-Nuclear Contexts

International Nuclear Information System (INIS)

Svensson, Ola; Salo, Ilkka

2004-11-01

A systems perspective on safety management is introduced followed by two briefly presented case studies of safety management in non-nuclear contexts. The first study concerns a car manufacturer and the second study a road traffic tunnel system. The risks of a car accident in the first case study are evident. The great exposure generates many incidents and accidents. In the second study, the rather low traffic intensity through the tunnel produces few incidents and accidents and only a few fatal accidents over the years. Yet, the risk of the individual traveler is much greater in the tunnel than on the average road. The case studies are presented in a systems perspective with emphasis on information feedback about the risks of the systems. The first case study illustrates high quality safety management, while the second case study shows many weaknesses of the safety management in the tunnel system. Some differences in safety management between the case studies are noted. The last part of the study presents an organizational perspective on safety management and offers alternative theoretical perspectives on the concept of safety management. The report shows that further studies are needed both (1) to develop a frame of reference for describing safety management across industries and activities and (2) to collect data illustrating of good and poor safety management. Then, the results can be used to strengthen and/or improving safety management in the nuclear power industry and its regulators

Alternating ibuprofen and acetaminophen in the treatment of febrile children: a pilot study [ISRCTN30487061

Directory of Open Access Journals (Sweden)

Sabra Ramzi

2006-03-01

Full Text Available Abstract Background Alternating ibuprofen and acetaminophen for the treatment of febrile children is a prevalent practice among physicians and parents, despite the lack of evidence on effectiveness or safety. This randomized, double-blind and placebo-controlled clinical trial aims at comparing the antipyretic effectiveness and safety of a single administration of alternating ibuprofen and acetaminophen doses to that of ibuprofen mono-therapy in febrile children. Methods Seventy febrile children were randomly allocated to receive either a single oral dose of 10 mg/kg ibuprofen and 15 mg/kg oral acetaminophen after 4 hours, or a similar dose of ibuprofen and placebo at 4 hours. Rectal temperature was measured at baseline, 4, 5, 6, 7 and 8 hours later. Endpoints included proportions of afebrile children at 6, 7 and 8 hours, maximum decline in temperature, time to recurrence of fever, and change in temperature from baseline at each time point. Intent-to-treat analysis was planned with statistical significance set at P Results A higher proportion of subjects in the intervention group (83.3% became afebrile at 6 hours than in the control group (57.6%; P = 0.018. This difference was accentuated at 7 and 8 hours (P Conclusion A single dose of alternating ibuprofen and acetaminophen appears to be a superior antipyretic regimen than ibuprofen mono-therapy. Further studies are needed to confirm these findings.

Improving safety culture through the health and safety organization: a case study.

Science.gov (United States)

Nielsen, Kent J

2014-02-01

International research indicates that internal health and safety organizations (HSO) and health and safety committees (HSC) do not have the intended impact on companies' safety performance. The aim of this case study at an industrial plant was to test whether the HSO can improve company safety culture by creating more and better safety-related interactions both within the HSO and between HSO members and the shop-floor. A quasi-experimental single case study design based on action research with both quantitative and qualitative measures was used. Based on baseline mapping of safety culture and the efficiency of the HSO three developmental processes were started aimed at the HSC, the whole HSO, and the safety representatives, respectively. Results at follow-up indicated a marked improvement in HSO performance, interaction patterns concerning safety, safety culture indicators, and a changed trend in injury rates. These improvements are interpreted as cultural change because an organizational double-loop learning process leading to modification of the basic assumptions could be identified. The study provides evidence that the HSO can improve company safety culture by focusing on safety-related interactions. © 2013. Published by Elsevier Ltd and National Safety Council.

Gas detection for alternate-fuel vehicle facilities.

Science.gov (United States)

Ferree, Steve

2003-05-01

Alternative fuel vehicles' safety is driven by local, state, and federal regulations in which fleet owners in key metropolitan [table: see text] areas convert much of their fleet to cleaner-burning fuels. Various alternative fuels are available to meet this requirement, each with its own advantages and requirements. This conversion to alternative fuels leads to special requirements for safety monitoring in the maintenance facilities and refueling stations. A comprehensive gas and flame monitoring system needs to meet the needs of both the user and the local fire marshal.

Study on the KALIMER safety approach

International Nuclear Information System (INIS)

Kim, Eui Kwang; Han, Do Hee; Kim, Young Cheol.

1997-01-01

This study describes KALIMER's safety approach, how to establish the safety criteria and temperature limit, how to define safety evaluation events, and some safety research and development needs items. It is recommended that the KALIMER's approach to safety use seven levels of safety design and a defense-in-depth design approach with particular emphasis on inherent passive features. In order to establish as set DBEs for KALIMER safety evaluation, the procedure is explained how to define safety evaluation events. Final selection is to be determined later with the final establishment of design concepts. On the basis of preliminary studies and evaluation of the plant safety related areas, the KALIMER and PRISM have following three main difference that may require special research and development for KALIMER. (author). 7 refs., 6 tabs., 6 figs

Alternative Education Completers: A Phenomenological Study

Science.gov (United States)

Murray, Becky L.; Holt, Carleton R.

2014-01-01

The purpose of this study was to explore the elements of the alternative education experience significant to successful completion of the program. This phenomenological paradigm provided the framework for all aspects of the qualitative study. Students, parents, administrators, and staff members of two alternative programs in the southeast Kansas…

Exploiting data from safety investigations and processes to assess performance of safety management aspects

NARCIS (Netherlands)

Karanikas, Nektarios

2016-01-01

This paper presents an alternative way to use records from safety investigations as a means to support the evaluation of safety management (SM) aspects. Datasets from safety investigation reports and progress records of an aviation organization were analyzed with the scope of assessing safety

The use of non-animal alternatives in the safety evaluations of cosmetics ingredients by the Scientific Committee on Consumer Safety (SCCS).

Science.gov (United States)

Vinardell, M P

2015-03-01

In Europe, the safety evaluation of cosmetics is based on the safety evaluation of each individual ingredient. Article 3 of the Cosmetics Regulation specifies that a cosmetic product made available on the market is to be safe for human health when used normally or under reasonably foreseeable conditions. For substances that cause some concern with respect to human health (e.g., colourants, preservatives, UV-filters), safety is evaluated at the Commission level by a scientific committee, presently called the Scientific Committee on Consumer Safety (SCCS). According to the Cosmetics Regulations, in the EU, the marketing of cosmetics products and their ingredients that have been tested on animals for most of their human health effects, including acute toxicity, is prohibited. Nevertheless, any study dating from before this prohibition took effect is accepted for the safety assessment of cosmetics ingredients. The in vitro methods reported in the dossiers submitted to the SCCS are here evaluated from the published reports issued by the scientific committee of the Directorate General of Health and Consumers (DG SANCO); responsible for the safety of cosmetics ingredients. The number of studies submitted to the SCCS that do not involve animals is still low and in general the safety of cosmetics ingredients is based on in vivo studies performed before the prohibition. Copyright © 2014 Elsevier Inc. All rights reserved.

75 FR 56015 - Vessel Inspection Alternatives

Science.gov (United States)

2010-09-15

... DEPARTMENT OF HOMELAND SECURITY Coast Guard 46 CFR Part 8 Vessel Inspection Alternatives CFR... Certificate; (ii) International Tonnage Certificate; (iii) Cargo Ship Safety Construction Certificate; (iv) Cargo Ship Safety Equipment Certificate; and (v) International Oil Pollution Prevention Certificate; and...

The procedure of alternative site selection within the report of the study group on the radioactive waste final repository selection process (AKEnd)

International Nuclear Information System (INIS)

Brenner, M.

2005-01-01

The paper discusses the results of the report of the study group on the radioactive waste final repository selection process with respect to the alternative site selection procedure. Key points of the report are the long-term safety, the alternativity of sites and the concept of one repository. The critique on this report is focussed on the topics site selection and licensing procedures, civil participation, the factor time and the question of cost

A tiered approach to the use of alternatives to animal testing for the safety assessment of cosmetics: eye irritation.

Science.gov (United States)

McNamee, Pauline; Hibatallah, Jalila; Costabel-Farkas, Margit; Goebel, Carsten; Araki, Daisuke; Dufour, Eric; Hewitt, Nicola J; Jones, Penny; Kirst, Annette; Le Varlet, Béatrice; Macfarlane, Martin; Marrec-Fairley, Monique; Rowland, Joanna; Schellauf, Florian; Scheel, Julia

2009-07-01

The need for alternative approaches to replace the in vivo rabbit Draize eye test for evaluation of eye irritation of cosmetic ingredients has been recognised by the cosmetics industry for many years. Extensive research has lead to the development of several assays, some of which have undergone formal validation. Even though, to date, no single in vitro assay has been validated as a full replacement for the rabbit Draize eye test, organotypic assays are accepted for specific and limited regulatory purposes. Although not formally validated, several other in vitro models have been used for over a decade by the cosmetics industry as valuable tools in a weight of evidence approach for the safety assessment of ingredients and finished products. In light of the deadlines established in the EU Cosmetics Directive for cessation of animal testing for cosmetic ingredients, a COLIPA scientific meeting was held in Brussels on 30th January, 2008 to review the use of alternative approaches and to set up a decision-tree approach for their integration into tiered testing strategies for hazard and safety assessment of cosmetic ingredients and their use in products. Furthermore, recommendations are given on how remaining data gaps and research needs can be addressed.

Review and analysis of potential safety impacts of and regulatory barriers to fuel efficiency technologies and alternative fuels in medium- and heavy-duty vehicles

Science.gov (United States)

2015-06-01

This report summarizes a safety analysis of medium- and heavy-duty vehicles (MD/HDVs) equipped with fuel efficiency (FE) technologies and/or using alternative fuels (natural gas-CNG and LNG, propane, biodiesel and power train electrification). The st...

Washoe Tribe Alternative Energy Feasibility Study Final Report

Energy Technology Data Exchange (ETDEWEB)

Johnson, Jennifer [Washoe Tribe of NV and CA

2014-10-01

The Washoe Tribe of Nevada and California was awarded funding to complete the Washoe Tribe Alternative Energy Feasibility Study project. The main goal of the project was to complete an alternative energy feasibility study. This study was completed to evaluate “the potential for development of a variety of renewable energy projects and to conduct an alternative energy feasibility study that determines which alternative energy resources have the greatest economic opportunity for the Tribe, while respecting cultural and environmental values” (Baker-Tilly, 2014). The study concluded that distributed generation solar projects are the best option for renewable energy development and asset ownership for the Washoe Tribe. Concentrating solar projects, utility scale wind projects, geothermal, and biomass resource projects were also evaluated during the study and it was determined that these alternatives would not be feasible at this time.

RAMONA-4B development for SBWR safety studies

Energy Technology Data Exchange (ETDEWEB)

Rohatgi, U.S.; Aronson, A.L.; Cheng, H.S.; Khan, H.J.; Mallen, A.N.

1993-12-31

The Simplified Boiling Water Reactor (SBWR) is a revolutionary design of a boiling-water reactor. The reactor is based on passive safety systems such as natural circulation, gravity flow, pressurized gas, and condensation. SBWR has no active systems, and the flow in the vessel is by natural circulation. There is a large chimney section above the core to provide a buoyancy head for natural circulation. The reactor can be shut down by either of four systems; namely, scram, Fine Motion Control Rod Drive (FMCRD), Alternate Rod Insertion (ARI), and Standby Liquid Control System (SLCS). The safety injection is by gravity drain from the Gravity Driven Cooling System (GDCS) and Suppression Pool (SP). The heat sink is through two types of heat exchangers submerged in the tank of water. These heat exchangers are the Isolation Condenser (IC) and the Passive Containment Cooling System (PCCS). The RAMONA-4B code has been developed to simulate the normal operation, reactivity transients, and to address the instability issues for SBWR. The code has a three-dimensional neutron kinetics coupled to multiple parallel-channel thermal-hydraulics. The two-phase thermal hydraulics is based on a nonhomogeneous nonequilibrium drift-flux formulation. It employs an explicit integration to solve all state equations (except for neutron kinetics) in order to predict the instability without numerical damping. The objective of this project is to develop a Sun SPARC and IBM RISC 6000 based RAMONA-4B code for applications to SBWR safety analyses, in particular for stability and ATWS studies.

RAMONA-4B development for SBWR safety studies

International Nuclear Information System (INIS)

Rohatgi, U.S.; Aronson, A.L.; Cheng, H.S.; Khan, H.J.; Mallen, A.N.

1993-01-01

The Simplified Boiling Water Reactor (SBWR) is a revolutionary design of a boiling-water reactor. The reactor is based on passive safety systems such as natural circulation, gravity flow, pressurized gas, and condensation. SBWR has no active systems, and the flow in the vessel is by natural circulation. There is a large chimney section above the core to provide a buoyancy head for natural circulation. The reactor can be shut down by either of four systems; namely, scram, Fine Motion Control Rod Drive (FMCRD), Alternate Rod Insertion (ARI), and Standby Liquid Control System (SLCS). The safety injection is by gravity drain from the Gravity Driven Cooling System (GDCS) and Suppression Pool (SP). The heat sink is through two types of heat exchangers submerged in the tank of water. These heat exchangers are the Isolation Condenser (IC) and the Passive Containment Cooling System (PCCS). The RAMONA-4B code has been developed to simulate the normal operation, reactivity transients, and to address the instability issues for SBWR. The code has a three-dimensional neutron kinetics coupled to multiple parallel-channel thermal-hydraulics. The two-phase thermal hydraulics is based on a nonhomogeneous nonequilibrium drift-flux formulation. It employs an explicit integration to solve all state equations (except for neutron kinetics) in order to predict the instability without numerical damping. The objective of this project is to develop a Sun SPARC and IBM RISC 6000 based RAMONA-4B code for applications to SBWR safety analyses, in particular for stability and ATWS studies

System study of alternative waste management techniques: Final report

International Nuclear Information System (INIS)

1986-01-01

This report summarizes the important results achieved in conjunction with the Research and Development Priority ''Alternative Waste Management Techniques'' sponsored by the Federal Ministry of Research and Technology from 1981 to 1984. The subject of these studies was solely ''direct disposal'' of spent fuel elements. For this purpose a reference concept was selected from a variety of possible processes and engineered in detailed form by firms in the nuclear industry. Those who worked on the engineering concepts consider this waste management method technically feasible. Several disposal casks have been fabricated. The basic licensability of direct disposal can be evaluated on the basis of the documentation developed by the companies. The direct disposal method was compared with the ''integrated waste management concept'' using reference fuel cycles with respect to the following criteria: radiological safety and nuclear material safeguards and, in addition, economic and energy-policy aspects. It was found that with respect to radiological safety, including the long-term safety of the final repository, there are no significant differences between the two fuel cycles with and without reprocessing. With respect to the nuclear material safeguards of a final repository containing spent fuel elements, there are still a number of unanswered questions. From an economic standpoint, direct disposal will be more economical in the foreseeable future than integrated waste management. Quantification of the effects of one or the other waste management method on the national economy is not necessarily possible. Reprocessing is supported primarily by technological and energy-policy considerations. On the basis of the results, the conclusion is reached that reprocessing should be pursued further, but that at the same time direct disposal should be developed to the point of practical maturity

Nordic studies in reactor safety

International Nuclear Information System (INIS)

Pershagen, N.

1993-01-01

The Nordic Nuclear Safety Research Programme SIK programme in reactor safety is part of a major joint Nordic research effort in nuclear safety. The report summarizes the achievements of the SIK programme, which was carried out during 1990-1993 in collaboration between Nordic nuclear utilities, safety authorities, and research institutes. Three main projects were successfully completed dealing with: 1) development and application of a living PSA concept for monitoring the risk of core damage, and of safety indicators for early warning of possible safety problems; 2) review and intercomparison of severe accident codes, case studies of potential core melt accidents in nordic reactors, development of chemical models for the MAAP code, and outline of a system for computerized accident management support; 3) compilation of information about design and safety features of neighbouring reactors in Germany, Lithuania and Russia, and for naval reactors and nuclear submarines. The report reviews the state-of-the-art in each subject matter as an introduction to the individual project summaries. The main findings of each project are highlighted. The report also contains an overview of reactor safety research in the Nordic countries and a summary of fundamental reactor safety principles. (au) (69 refs.)

Complementary and Alternative Medicine

Science.gov (United States)

... therapies are often lacking; therefore, the safety and effectiveness of many CAM therapies are uncertain. The National Center for Complementary and Alternative Medicine (NCCAM) is sponsoring research designed to fill this ...

Energy conversion alternatives study

Science.gov (United States)

Shure, L. T.

1979-01-01

Comparison of coal based energy systems is given. Study identifies and compares various advanced energy conversion systems using coal or coal derived fuels for baselaoad electric power generation. Energy Conversion Alternatives Study (ECAS) reports provede government, industry, and general public with technically consistent basis for comparison of system's options of interest for fossilfired electric-utility application.

A study on the establishment of safety assessment guidelines of commercial grade item dedication in digitalized safety systems

International Nuclear Information System (INIS)

Hwang, H. S.; Kim, B. R.; Oh, S. H.

1999-01-01

Because of obsolescing the components used in safety related systems of nuclear power plants, decreasing the number of suppliers qualified for the nuclear QA program and increasing maintenance costs of them, utilities have been considering to use commercial grade digital computers as an alternative for resolving such issues. However, commercial digital computers use the embedded pre-existing software, including operating system software, which are not developed by using nuclear grade QA program. Thus, it is necessary for utilities to establish processes for dedicating digital commercial grade items. A regulatory body also needs guidance to evaluate the digital commercial products properly. This paper surveyed the regulations and their regulatory guides, which establish the requirements for commercial grade items dedication, industry standards and guidances applicable to safety related systems. This paper provides some guidelines to be applied in evaluating the safety of digital upgrades and new digital plant protection systems in Korea

A Study on the Allowable Safety Factor of Cut-Slopes for Nuclear Facilities

Energy Technology Data Exchange (ETDEWEB)

Kim, Myung Soo; Yee, Eric [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

2015-10-15

In this study, the issues of allowable safety factor design criteria for cut-slopes in nuclear facilities is derived through case analysis, a proposed construction work slope design criteria that provides relatively detailed conditions can be applied in case of the dry season and some unclear parts of slope design criteria be modified in case of the rainy season. This safety factor can be further subdivided into two; normal and earthquake factors, a factor of 1.5 is applied for normal conditions and a factor of 1.2 is applied for seismic conditions. This safety factor takes into consideration the effect of ground water and rainfall conditions. However, no criteria for the case of cut-slope in nuclear facilities and its response to seismic conditions is clearly defined, this can cause uncertainty in design. Therefore, this paper investigates the allowable safety factor for cut-slopes in nuclear facilities, reviews conditions of both local and international cut-slope models and finally suggests an alternative method of analysis. It is expected that the new design criteria adequately ensures the stability of the cut-slope to reflect clear conditions for both the supervising and design engineers.

Measuring Safety Culture on Ships Using Safety Climate: A Study among Indian Officers

Directory of Open Access Journals (Sweden)

Yogendra Bhattacharya

2015-12-01

Full Text Available Workplace safety continues to be an area of concern in the maritime industry due to the international nature of the operations. The effectiveness of extensive legislation to manage shipboard safety remains in doubt. The focus must therefore shift towards the human element - seafarers and their perceptions of safety. The study aims to understand the alignment that exists between safety culture and safety climate on board ships as perceived by seafarers. The underlying factors of safety climate were identified using factor analysis which isolated seven factors - Support on Safety, Organizational Support, Resource Availability, Work Environment, Job Demands, ‘Just’ Culture, and Safety Compliance. The perception of safety level of seafarers was found to be low indicating the existence of misalignments between safety culture values and the actual safety climate. The study also reveals that the safety perceptions of officers employed directly by ship owners and those by managers do not differ significantly, nor do they differ between senior and junior officers. A shift in perspective towards how seafarers themselves feel towards safety might provide more effective solutions – instead of relying on regulations - and indeed aid in reducing incidents on board. This paper details practical suggestions on how to identify the factors that contribute towards a better safety climate on board ships.

Safety-technical comparison of a hard-wired dynamic reactor protection system with a computerized alternative. Pt. 2

International Nuclear Information System (INIS)

Buettner, W.E.

1978-03-01

The investigation presented here compares a conventional hard-wired dynamic reactor protection system with a computerized alternative. For both systems the spurious trip probability is determined, i.e. the probability of a false release of one or more protection actions due to failures. The mean unavailability is also determined for those not distinctly safety-oriented protection actions of the computerized protection system which are released via the open circuit current principle. This is because system breakdowns prevent the release of those protection actions in case of demand. The advantages and disadvantages of either type of system are viewed against each other. (orig.) [de

Safety goals for commercial nuclear power plants

International Nuclear Information System (INIS)

Roe, J.W.

1988-01-01

In its official policy statement on safety goals for the operation of nuclear power plants, the Nuclear Regulatory Commission (NRC) set two qualitative goals, supported by two quantitative objectives. These goals are that (1) individual members of the public should be provided a level of protection from the consequences of nuclear power plant operation such that individuals bear no significant additional risk to life and health; and (2) societal risks to life and health from nuclear power plant operation should be comparable to or less than the risks of generating electricity by viable competing technologies and should not be a significant addition to other societal risks. As an alternative, this study proposes four quantitative safety goals for nuclear power plants. It begins with an analysis of the NRC's safety-goal development process, a key portion of which was devoted to delineating criteria for evaluating goal-development methods. Based on this analysis, recommendations for revision of the NRC's basic benchmarks for goal development are proposed. Using the revised criteria, NRC safety goals are evaluated, and the alternative safety goals are proposed. To further support these recommendations, both the NRC's goals and the proposed goals are compared with the results of three major probabilistic risk assessment studies. Finally, the potential impact of these recommendations on nuclear safety is described

National Environmental Policy Act Hazards Assessment for the TREAT Alternative

Energy Technology Data Exchange (ETDEWEB)

Christensen, Boyd D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Schafer, Annette L. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2014-02-01

This document provides an assessment of hazards as required by the National Environmental Policy Act for the alternative of restarting the reactor at the Transient Reactor Test (TREAT) facility by the Resumption of Transient Testing Program. Potential hazards have been identified and screening level calculations have been conducted to provide estimates of unmitigated dose consequences that could be incurred through this alternative. Consequences considered include those related to use of the TREAT Reactor, experiment assembly handling, and combined events involving both the reactor and experiments. In addition, potential safety structures, systems, and components for processes associated with operating TREAT and onsite handling of nuclear fuels and experiments are listed. If this alternative is selected, a safety basis will be prepared in accordance with 10 CFR 830, “Nuclear Safety Management,” Subpart B, “Safety Basis Requirements.”

National Environmental Policy Act Hazards Assessment for the TREAT Alternative

Energy Technology Data Exchange (ETDEWEB)

Boyd D. Christensen; Annette L. Schafer

2013-11-01

This document provides an assessment of hazards as required by the National Environmental Policy Act for the alternative of restarting the reactor at the Transient Reactor Test (TREAT) facility by the Resumption of Transient Testing Program. Potential hazards have been identified and screening level calculations have been conducted to provide estimates of unmitigated dose consequences that could be incurred through this alternative. Consequences considered include those related to use of the TREAT Reactor, experiment assembly handling, and combined events involving both the reactor and experiments. In addition, potential safety structures, systems, and components for processes associated with operating TREAT and onsite handling of nuclear fuels and experiments are listed. If this alternative is selected, a safety basis will be prepared in accordance with 10 CFR 830, “Nuclear Safety Management,” Subpart B, “Safety Basis Requirements.”

Prospects for alternative Fusion Fuels

International Nuclear Information System (INIS)

Glancy, J.

1986-01-01

The author has worked on three different magnetic confinement concepts for alternate fusion fueled reactors: tokamaks; tanden mirrors, and reversed field pinches. The focus of this article is on prospects for alternate fusion fuels as the author sees them relative to the other choices: increased numbers of coal plants, fission reactors, renewables, and D-T fusion. Discussion is limited on the consideration of alternate fusion fuels to the catalyzed deuterium-deuterium fuel cycle. Reasons for seeking an alternate energy source are cost, a more secure fuel supply, environmental impact and safety. The technical risks associated with development of fusion are examined briefly

Safety studies on Korean fusion DEMO plant using integrated safety assessment methodology

International Nuclear Information System (INIS)

Oh, Kyemin; Kang, Myoung-suk; Heo, Gyunyoung; Kim, Hyoung-chan

2014-01-01

Highlights: •The purpose of this paper is to suggest methodology that can investigate safety issues and provides a case study for Korean fusion DEMO plant. •The concepts of integrated safety assessment methodology (ISAM) that can be applied in addressing regulatory requirements and recognizing safety issues for K-DEMO were emphasized. •Phenomena identification and ranking table (PIRT) was proposed. It can recognize vulnerabilities of systems and identify the gaps in technical areas requiring additional researches. •This work is expected to contribute on the conceptual design of safety features for K-DEMO to design engineers and the guidance for regulatory requirements to licensers. -- Abstract: The purpose of this paper is to suggest methodology that can investigate safety issues and provides a case study for Korean fusion DEMO plant (K-DEMO) as a part of R and D program through the National Fusion Research Institute of Korea. Even though nuclear regulation and licensing framework is well setup due to the operating and design experience of Pressurized Water Reactors (PWRs) since 1970s, the regulatory authority of South Korea has concerns on the challenge of facing new nuclear facilities including K-DEMO due to the differences in systems, materials, and inherent safety feature from conventional PWRs. Even though the follow-up of the ITER license process facilitates to deal with significant safety issues of fusion facilities, a licensee as well as a licenser should identify the gaps between ITER and DEMO in terms of safety issues. First we reviewed the methods of conducting safety analysis for unprecedented nuclear facilities such as Generation IV reactors, particularly very high temperature reactor (VHTR), which is called as integrated safety assessment methodology (ISAM). Second, the analysis for the conceptual design of K-DEMO on the basis of ISAM was conducted. The ISAM consists of five analytical tools to develop the safety requirements from licensee

Safety studies on Korean fusion DEMO plant using integrated safety assessment methodology

Energy Technology Data Exchange (ETDEWEB)

Oh, Kyemin; Kang, Myoung-suk [Kyung Hee University, Youngin-si, Gyeonggi-do 446-701 (Korea, Republic of); Heo, Gyunyoung, E-mail: gheo@khu.ac.kr [Kyung Hee University, Youngin-si, Gyeonggi-do 446-701 (Korea, Republic of); Kim, Hyoung-chan [National Fusion Research Institute, Daejeon-si 305-333 (Korea, Republic of)

2014-10-15

Highlights: •The purpose of this paper is to suggest methodology that can investigate safety issues and provides a case study for Korean fusion DEMO plant. •The concepts of integrated safety assessment methodology (ISAM) that can be applied in addressing regulatory requirements and recognizing safety issues for K-DEMO were emphasized. •Phenomena identification and ranking table (PIRT) was proposed. It can recognize vulnerabilities of systems and identify the gaps in technical areas requiring additional researches. •This work is expected to contribute on the conceptual design of safety features for K-DEMO to design engineers and the guidance for regulatory requirements to licensers. -- Abstract: The purpose of this paper is to suggest methodology that can investigate safety issues and provides a case study for Korean fusion DEMO plant (K-DEMO) as a part of R and D program through the National Fusion Research Institute of Korea. Even though nuclear regulation and licensing framework is well setup due to the operating and design experience of Pressurized Water Reactors (PWRs) since 1970s, the regulatory authority of South Korea has concerns on the challenge of facing new nuclear facilities including K-DEMO due to the differences in systems, materials, and inherent safety feature from conventional PWRs. Even though the follow-up of the ITER license process facilitates to deal with significant safety issues of fusion facilities, a licensee as well as a licenser should identify the gaps between ITER and DEMO in terms of safety issues. First we reviewed the methods of conducting safety analysis for unprecedented nuclear facilities such as Generation IV reactors, particularly very high temperature reactor (VHTR), which is called as integrated safety assessment methodology (ISAM). Second, the analysis for the conceptual design of K-DEMO on the basis of ISAM was conducted. The ISAM consists of five analytical tools to develop the safety requirements from licensee

Assateague Island National Seashore alternative transportation systems planning study and business plan for alternative transportation

Science.gov (United States)

2012-08-31

The purpose of this study was to (1) study the potential expansion of existing alternative transportation systems (bicycle facilities) and development of new alternative transportation systems in and around the Maryland District of Assateague Island ...

[Safety profile of zolpidem: two studies of 3805 patients by Swiss practitioners].

Science.gov (United States)

Ganzoni, E; Gugger, M

1999-06-24

Evaluation and treatment of insomnia are frequent procedures in the physician's everyday practice, since many patients seek medical treatment for this condition. Knowledge of pharmacological therapeutical alternatives is therefore decisive, in order to identify the most efficaceous and safe therapy for the patient among the available hypnotics. The short-acting hypnotic zolpidem has been investigated in Switzerland in two multicenter safety studies in ambulatory practice. In the first study 8.9% (n = 125 of 1,972 treated patients), and in the second 7.2% of the patients (n = 175 of 1,833 treated patients) reported an adverse event. The most frequent events were related to the central nervous system (CNS) (somnolence, headache, confusion, vertigo); gastrointestinal and cutaneous symptoms were the most frequent non CNS-dependent effects. New, unknown or serious adverse events were not found and no specific risk factor or population at risk was identified. The safety profile of zolpidem is consistent with its known pharmacological properties, the results of previous clinical trials and the international experience obtained in large patients groups.

Managing Safety and Operations: The Effect of Joint Management System Practices on Safety and Operational Outcomes.

Science.gov (United States)

Tompa, Emile; Robson, Lynda; Sarnocinska-Hart, Anna; Klassen, Robert; Shevchenko, Anton; Sharma, Sharvani; Hogg-Johnson, Sheilah; Amick, Benjamin C; Johnston, David A; Veltri, Anthony; Pagell, Mark

2016-03-01

The aim of this study was to determine whether management system practices directed at both occupational health and safety (OHS) and operations (joint management system [JMS] practices) result in better outcomes in both areas than in alternative practices. Separate regressions were estimated for OHS and operational outcomes using data from a survey along with administrative records on injuries and illnesses. Organizations with JMS practices had better operational and safety outcomes than organizations without these practices. They had similar OHS outcomes as those with operations-weak practices, and in some cases, better outcomes than organizations with safety-weak practices. They had similar operational outcomes as those with safety-weak practices, and better outcomes than those with operations-weak practices. Safety and operations appear complementary in organizations with JMS practices in that there is no penalty for either safety or operational outcomes.

78 FR 73471 - Refuge Alternatives for Underground Coal Mines

Science.gov (United States)

2013-12-06

... Refuge Alternatives for Underground Coal Mines AGENCY: Mine Safety and Health Administration, Labor... Agency's Request for Information (RFI) on Refuge Alternatives for Underground Coal Mines. This extension...), MSHA published a Request for Information on Refuge Alternatives for Underground Coal Mines. The RFI...

Railway safety climate: a study on organizational development.

Science.gov (United States)

Cheng, Yung-Hsiang

2017-09-07

The safety climate of an organization is considered a leading indicator of potential risk for railway organizations. This study adopts the perceptual measurement-individual attribute approach to investigate the safety climate of a railway organization. The railway safety climate attributes are evaluated from the perspective of railway system staff. We identify four safety climate dimensions from exploratory factor analysis, namely safety communication, safety training, safety management and subjectively evaluated safety performance. Analytical results indicate that the safety climate differs at vertical and horizontal organizational levels. This study contributes to the literature by providing empirical evidence of the multilevel safety climate in a railway organization, presents possible causes of the differences under various cultural contexts and differentiates between safety climate scales for diverse workgroups within the railway organization. This information can be used to improve the safety sustainability of railway organizations and to conduct safety supervisions for the government.

Examination of alternatives to upgrade fire safety in operating NPPs

International Nuclear Information System (INIS)

Park, J. H.; Jung, I. S.

2003-01-01

For the Kori unit 2,3,4, Younggwang 1,2 and Ulchin 1,2 fire protection vulnerabilities and further improvement items are investigated. The most major problem is that those plants do not have plant-specific Fire Hazard Analysis Report. To improve fire safety of those plants, their own Fire Hazard Analysis should be proceed at first. Then, according to results of Fire Hazard Analysis, fire protection improvement program should be implemented. For the assurance of long term fire safety, result of Fire Hazard Analysis should be incorporated in the FSAR and periodically reviewed the impact of design change to fire safety

78 FR 58264 - Refuge Alternatives for Underground Coal Mines

Science.gov (United States)

2013-09-23

... Refuge Alternatives for Underground Coal Mines AGENCY: Mine Safety and Health Administration, Labor... Agency's Request for Information (RFI) on Refuge Alternatives for Underground Coal Mines. This extension... Alternatives for Underground Coal Mines. The RFI comment period had been scheduled to close on October 7, 2013...

Demonstrating a correlation between the maturity of road safety practices and road safety incidents.

Science.gov (United States)

Amador, Luis; Willis, Christopher Joseph

2014-01-01

The objective of this study is to demonstrate a correlation between the maturity of a country's road safety practices and road safety incidents. Firstly, data on a number of road injuries and fatalities for 129 countries were extracted from the United Nations Global Status on Road Safety database. These data were subdivided according to road safety incident and accident causation factors and normalized based on vehicular fleet (per 1000 vehicles) and road network (per meter of paved road). Secondly, a road safety maturity model was developed based on an adaptation of the concept of process maturity modeling. The maturity of countries with respect to 10 road safety practices was determined through the identification of indicators recorded in the United Nations Global Status of Road Safety Database. Plots of normalized road safety performance of the 129 countries against their maturity scores for each road safety practice as well as an aggregation of the road safety practices were developed. An analysis of variance was done to determine the extent of the correlation between the road safety maturity of the countries and their performance. In addition, a full Bayesian analysis was done to confirm the correlation of each of the road safety practices with injuries and fatalities. Regression analysis for fatalities, injuries, and combined accidents identified maturity with respect to road safety practices associated with speed limits and use of alternative modes as being the most significant predictors of traffic fatalities. A full Bayesian regression confirms that there is a correlation between the maturity of road safety practices and road safety incidents. Road safety practices associated with enforcement of speed limits and promotion of alternative modes are the most significant road safety practices toward which mature countries have concentrated their efforts, resulting in a lower frequency of fatalities, injury rates, and property damage accidents. The authors

Evaluation of Flammable Gas Monitoring and Ventilation System Alternatives for Double-Contained Receiver Tanks

International Nuclear Information System (INIS)

GUSTAVSON, R.D.

1999-01-01

This study identifies possible flammable gas monitoring and ventilation system alternatives to ensure adequate removal of flammable gases from the Double-Contained Receiver Tank (DCRT) primary tanks during temporary storage of small amounts of waste. The study evaluates and compares these alternatives to support closure of the Flammable Gas Unreviewed Safety Question (USQ TF-96-04330)

Power plants and safety 1982

International Nuclear Information System (INIS)

1982-01-01

The papers of this volume deal with the whole range of safety issues from planning and construction to the operation of power plants, and discuss also issues like availability and safety of power plants, protective clothes and their incommodating effect, alternatives for rendering hot-water generators safe and the safety philosophy in steam turbine engineering. (HAG) [de

Safety assessment of complex engineered and natural systems: radioactive waste disposal

International Nuclear Information System (INIS)

McNeish, J.A.; Vallikat, V.; Atkins, J.; Balady, M.A.

1997-01-01

Evaluation of deep, geologic disposal of nuclear waste requires the probabilistic safety assessment of a complex system from the coupling of various processes and sub-systems, parameter and model uncertainties, spatial and temporal variabilities, and the multiplicity of designs and scenarios. Both the engineered and natural system are included in the evaluation. Each system has aspects with considerable uncertainty both in important parameters and in overall conceptual models. The study represented herein provides a probabilistic safety assessment of a potential respository system for multiple engineered barrier system (EBS) design and conceptual model configurations (CRWMS M and O, 1996a) and considers the effects of uncertainty on the overall results. The assessment is based on data and process models available at the time of the study and doesnt necessarily represent the current safety evaluation. In fact, the percolation flux through the repository system is now expected to be higher than the estimate used for this study. The potential effects of higher percolation fluxes are currently under study. The safety of the system was assessed for both 10,000 and 1,000,000 years. Use of alternative conceptual models also produced major improvement in safety. For example, use of a more realistic engineered system release model produced improvement of over an order of magnitude in safety. Alternative measurement locations for the safety assessment produced substantial increases in safety, through the results are based on uncertain dilution factors in the transporting groundwater. (Author)

Multilevel model of safety climate for furniture industries.

Science.gov (United States)

Rodrigues, Matilde A; Arezes, Pedro M; Leão, Celina P

2015-01-01

Furniture companies can analyze their safety status using quantitative measures. However, the data needed are not always available and the number of accidents is under-reported. Safety climate scales may be an alternative. However, there are no validated Portuguese scales that account for the specific attributes of the furniture sector. The current study aims to develop and validate an instrument that uses a multilevel structure to measure the safety climate of the Portuguese furniture industry. The Safety Climate in Wood Industries (SCWI) model was developed and applied to the safety climate analysis using three different scales: organizational, group and individual. A multilevel exploratory factor analysis was performed to analyze the factorial structure. The studied companies' safety conditions were also analyzed. Different factorial structures were found between and within levels. In general, the results show the presence of a group-level safety climate. The scores of safety climates are directly and positively related to companies' safety conditions; the organizational scale is the one that best reflects the actual safety conditions. The SCWI instrument allows for the identification of different safety climates in groups that comprise the same furniture company and it seems to reflect those groups' safety conditions. The study also demonstrates the need for a multilevel analysis of the studied instrument.

A study of alternative splicing in the pig

Directory of Open Access Journals (Sweden)

Jørgensen Claus B

2010-05-01

Full Text Available Abstract Background Since at least half of the genes in mammalian genomes are subjected to alternative splicing, alternative pre-mRNA splicing plays an important contribution to the complexity of the mammalian proteome. Expressed sequence tags (ESTs provide evidence of a great number of possible alternative isoforms. With the EST resource for the domestic pig now containing more than one million porcine ESTs, it is possible to identify alternative splice forms of the individual transcripts in this species from the EST data with some confidence. Results The pig EST data generated by the Sino-Danish Pig Genome project has been assembled with publicly available ESTs and made available in the PigEST database. Using the Distiller package 2,515 EST clusters with candidate alternative isoforms were identified in the EST data with high confidence. In agreement with general observations in human and mouse, we find putative splice variants in about 30% of the contigs with more than 50 ESTs. Based on the criteria that a minimum of two EST sequences confirmed each splice event, a list of 100 genes with the most distinct tissue-specific alternative splice events was generated from the list of candidates. To confirm the tissue specificity of the splice events, 10 genes with functional annotation were randomly selected from which 16 individual splice events were chosen for experimental verification by quantitative PCR (qPCR. Six genes were shown to have tissue specific alternatively spliced transcripts with expression patterns matching those of the EST data. The remaining four genes had tissue-restricted expression of alternative spliced transcripts. Five out of the 16 splice events that were experimentally verified were found to be putative pig specific. Conclusions In accordance with human and rodent studies we estimate that approximately 30% of the porcine genes undergo alternative splicing. We found a good correlation between EST predicted tissue

Technology, safety, and costs of decommissioning reference nuclear research and test reactors. Main report

International Nuclear Information System (INIS)

Konzek, G.J.; Ludwick, J.D.; Kennedy, W.E. Jr.; Smith, R.I.

1982-03-01

Safety and Cost Information is developed for the conceptual decommissioning of two representative licensed nuclear research and test reactors. Three decommissioning alternatives are studied to obtain comparisons between costs (in 1981 dollars), occupational radiation doses, potential radiation dose to the public, and other safety impacts. The alternatives considered are: DECON (immediate decontamination), SAFSTOR (safe storage followed by deferred decontamination), and ENTOMB (entombment). The study results are presented in two volumes. Volume 1 (Main Report) contains the results in summary form

Defining safety culture and the nexus between safety goals and safety culture. 1. An Investigation Study on Practical Points of Safety Management

International Nuclear Information System (INIS)

Hasegawa, Naoko; Takano, Kenichi; Hirose, Ayako

2001-01-01

In a report after the Chernobyl accident, the International Atomic Energy Agency indicated the definition and the importance of safety culture and the ideal organizational state where safety culture pervades. However, the report did not mention practical approaches to enhance safety culture. In Japan, although there had been investigations that clarified the consciousness of employees and the organizational climate in the nuclear power and railway industries, organizational factors that clarified the level of organization safety and practical methods that spread safety culture in an organization had not been studied. The Central Research Institute of the Electric Power Industry conducted surveys of organizational culture for the construction, chemical, and manufacturing industries. The aim of our study was to clarify the organizational factors that influence safety in an organization expressed in employee safety consciousness, commitment to safety activities, rate of accidents, etc. If these areas were clarified, the level of organization safety might be evaluated, and practical ways could be suggested to enhance the safety culture. Consequently, a series of investigations was conducted to clarify relationships among organizational climate, employee consciousness, safety management and activities, and rate of accidents. The questionnaire surveys were conducted in 1998-1999. The subjects were (a) managers of the safety management sections in the head offices of the construction, chemical, and manufacturing industries; (b) responsible persons in factories of the chemical and manufacturing industries; and (c) general workers in factories of the chemical and manufacturing industries. The number of collected data was (a) managers in the head office: 48 from the construction industry and 58 from the chemical and manufacturing industries, (b) responsible persons in factories: 567, and (c) general workers: from 29 factories. Items in the questionnaires were selected from

To dimension safety valves. Probabilist study

International Nuclear Information System (INIS)

Noel, Robert; Couvreur, Denis

1982-01-01

The gauge of safety valves of a steam pressure apparatus is usually determined according to an operating situation envelope which it is admitted covers all that can happen in reality. For the safety of the dryer-superheaters of turbines in nuclear power stations, Electricite de France and Alsthom-Atlantique made a reliability study; its method is exposed and the results are discussed. Such a study is heavy going and complex, but in return it permits a better quantitative understanding of the various dimension and operating parameters of an installation which condition its safety. It is therefore a source of progress [fr

Alternative Middle School Models: An Exploratory Study

Science.gov (United States)

Duffield, Stacy Kay

2018-01-01

A Midwestern state allocated grant funding to encourage more accessible alternative programming at the middle level. Seventeen schools were approved for this grant and used the funds to supplement the operation of a new or existing program. This study provides policymakers and educators with an overview of the various types of alternative middle…

Nuclear Safety. 1997

International Nuclear Information System (INIS)

1998-01-01

A quick review of the nuclear safety at EDF may be summarized as follows: - the nuclear safety at EDF maintains at a rather good standard; - none of the incidents that took place has had any direct impact upon safety; - the availability remained good; - initiation of the floor 4 reactor generation (N4 unit - 1450 MW) ensued without major difficulties (the Civaux 1 NPP has been coupled to the power network at 24 december 1997); - the analysis of the incidents interesting from the safety point of view presents many similarities with earlier ones. Significant progress has been recorded in promoting actively and directly a safe operation by making visible, evident and concrete the exertion of the nuclear operation responsibility and its control by the hierarchy. The report develops the following chapters and subjects: 1. An overview on 1997; 1.1. The technical issues of the nuclear sector; 1.2. General performances in safety; 1.3. The main incidents; 1.4. Wastes and radiation protection; 2. Nuclear safety management; 2.1. Dynamics and results; 2.2. Ameliorations to be consolidated; 3. Other important issues in safety; 3.1. Probabilistic safety studies; 3.2. Approach for safety re-evaluation; 3.3. The network safety; 3.4. Crisis management; 3.5. The Lifetime program; 3.6. PWR; 3.7. Documentation; 3.8. Competence; 4. Safety management in the future; 4.1. An open future; 4.2. The fast neutron NPP at Creys-Malville; 4.3. Stabilization of the PWR reference frame; 4.4. Implementing the EURATOM directive regarding the radiation protection standards; 4.5. Development of biomedical research and epidemiological studies; 4.6. New regulations concerning the liquid and gaseous effluents; 5. Visions of an open future; 5.1. Alternative views upon safety ay EDF; 5.2. Safety authority; 5.3. International considerations; 5.4. What happens abroad; 5.5. References from non-nuclear domain. Four appendices are added referring to policy of safety management, policy of human factors in NPPs

Technology, safety, and costs of decommissioning reference nuclear research and test reactors. Appendices

International Nuclear Information System (INIS)

Konzek, G.J.; Ludwick, J.D.; Kennedy, W.E. Jr.; Smith, R.I.

1982-03-01

Safety and Cost Information is developed for the conceptual decommissioning of two representative licensed nuclear research and test reactors. Three decommissioning alternatives are studied to obtain comparisons between costs (in 1981 dollars), occupational radiation doses, potential radiation dose to the public, and other safety impacts. The alternatives considered are: DECON (immediate decontamination), SAFSTOR (safe storage followed by deferred decontamination), and EMTOMB (entombment). The study results are presented in two volumes. Volume 2 (Appendices) contains the detailed data that support the results given in Volume 1, including unit-component data

Technology, safety, and costs of decommissioning reference nuclear research and test reactors. Appendices

Energy Technology Data Exchange (ETDEWEB)

Konzek, G.J.; Ludwick, J.D.; Kennedy, W.E. Jr.; Smith, R.I.

1982-03-01

Safety and Cost Information is developed for the conceptual decommissioning of two representative licensed nuclear research and test reactors. Three decommissioning alternatives are studied to obtain comparisons between costs (in 1981 dollars), occupational radiation doses, potential radiation dose to the public, and other safety impacts. The alternatives considered are: DECON (immediate decontamination), SAFSTOR (safe storage followed by deferred decontamination), and EMTOMB (entombment). The study results are presented in two volumes. Volume 2 (Appendices) contains the detailed data that support the results given in Volume 1, including unit-component data.

Model quality and safety studies

DEFF Research Database (Denmark)

Petersen, K.E.

1997-01-01

The paper describes the EC initiative on model quality assessment and emphasizes some of the problems encountered in the selection of data from field tests used in the evaluation process. Further, it discusses the impact of model uncertainties in safety studies of industrial plants. The model...... that most of these have never been through a procedure of evaluation, but nonetheless are used to assist in making decisions that may directly affect the safety of the public and the environment. As a major funder of European research on major industrial hazards, DGXII is conscious of the importance......-tain model is appropriate for use in solving a given problem. Further, the findings from the REDIPHEM project related to dense gas dispersion will be highlighted. Finally, the paper will discuss the need for model quality assessment in safety studies....

Evaluation of seven in vitro alternatives for ocular safety testing.

Science.gov (United States)

Bruner, L H; Kain, D J; Roberts, D A; Parker, R D

1991-07-01

Seven in vitro assays were evaluated to determine if any were useful as screening procedures in ocular safety assessment. Seventeen test materials (chemicals, household cleaners, hand soaps, dishwashing liquids, shampoos, and liquid laundry detergents) were tested in each assay. In vivo ocular irritation scores for the materials were obtained from existing rabbit low volume eye test (LVET) data. The seven assays evaluated included the silicon microphysiometer (SM), luminescent bacteria toxicity test (LBT), neutral red assay (NR), total protein assay (TP), Tetrahymena thermophila motility assay (TTMA), bovine eye/chorioallantoic membrane assay (BE/CAM), and the EYTEX system (ETS). For the seventeen materials used in this study there was a significant correlation between the in vivo irritant potential and in vitro data for all the tests except the EYTEX System (SM, r = -0.87; LBT, r = -0.91; NR, r = -0.85; TTMA, r = 0.78; TP, r = -0.86; ETS, r = 0.29). The irritation classifications provided by the BE/CAM also did not correspond with the actual in vivo irritancy potential of the test materials. The result of this study suggested it may be possible to classify materials into broad irritancy categories with some of the assays. This would allow their use as screens prior to limited in vivo confirmation in the ocular safety assessment process.

HTGR safety philosophy

Energy Technology Data Exchange (ETDEWEB)

Joksimovic, V.; Fisher, C. R. [General Atomic Co., San Diego, CA (USA)

1981-01-15

The accident at the Three Mile Island has focused public attention on reactor safety. Many public figures advocate a safer method of generating nuclear electricity for the second nuclear era in the U.S. The paper discusses the safety philosophy of a concept deemed suitable for this second nuclear era. The HTGR, in the course of its evolution, included safety as a significant determinant in design philosophy. This is particularly evident in the design features which provide inherent safety. Inherent features cause releases from a wide spectrum of accident conditions to be low. Engineered features supplement inherent features. The significance of HTGR safety features is quantified and order-of-magnitude type of comparisons are made with alternative ways of generating electricity.

HTGR safety philosophy

International Nuclear Information System (INIS)

Joksimovic, V.; Fisher, C.R.

1981-01-01

The accident at the Three Mile Island has focused public attention on reactor safety. Many public figures advocate a safer method of generating nuclear electricity for the second nuclear era in the U.S. The paper discusses the safety philosophy of a concept deemed suitable for this second nuclear era. The HTGR, in the course of its evolution, included safety as a significant determinant in design philosophy. This is particularly evident in the design features which provide inherent safety. Inherent features cause releases from a wide spectrum of accident conditions to be low. Engineered features supplement inherent features. The significance of HTGR safety features is quantified and order-of-magnitude type of comparisons are made with alternative ways of generating electricity. (author)

HTGR safety philosophy

International Nuclear Information System (INIS)

Joskimovic, V.; Fisher, C.R.

1980-08-01

The accident at the Three Mile Island has focused public attention on reactor safety. Many public figures advocate a safer method of generating nuclear electricity for the second nuclear era in the US. The paper discusses the safety philosophy of a concept deemed suitable for this second nuclear era. The HTGR, in the course of its evolution, included safety as a significant determinant in design philosophy. This is particularly evident in the design features which provide inherent safety. Inherent features cause releases from a wide spectrum of accident conditions to be low. Engineered features supplement inherent features. The significance of HTGR safety features is quantified and order-of-magnitude type of comparisons are made with alternative ways of generating electricity

77 FR 27776 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2012-05-11

... Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH) In... Services Office, CDC, pursuant to Public Law 92-463. Purpose: The Safety and Occupational Health Study... standard grants review and funding cycles pertaining to research issues in occupational safety and health...

76 FR 18220 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2011-04-01

... Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH) In... Services Office, CDC, pursuant to Public Law 92-463. Purpose: The Safety and Occupational Health Study... standard grants review and funding cycles pertaining to research issues in occupational safety and health...

Preliminary Study for Application of the New Safety Goal related with the Limitation of Cs-137 release

Energy Technology Data Exchange (ETDEWEB)

Seo, Mi Ro; Shin, Tae Young [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

In the New Safety Goal, it is clearly stated that the Probabilistic Safety Assessment (PSA) should be performed with the proper technical appropriateness, the detail, and the scope in accordance with the integrated risk assessment against the accident for the nuclear power plants. This requirement is known to be come from the provision for preventing the long term ground contamination due to the release of radioactive material. However, there were so many concerns that this goal is so severe that the current design, even in the case of the constructing nuclear power plants, cannot meet this criterion. Especially for the operating nuclear power plants, since there were no mitigation facilities against the severe accident at the design stages, the application of this new goal is known to be much severe that the constructing nuclear power plants and it is necessary to develop the alternative methods to strengthen the safety of the operating nuclear power plants. The purpose of this study is to review the new safety goal from the view point of severe accident analysis and probabilistic safety assessment, and to find the appropriate methods in order to meet that goal for the operating nuclear power plants. In order to strengthen the safety for domestic nuclear power plants, all of the domestic operating nuclear power plants are required to prepare the Accident Management Plan within 3 years. Also, this Accident Management Plan should meet the New Safety Goal including the requirement that the sum of the accident frequency that the release of the radioactive nuclide Cs- 137 to the environment exceeds the 100TBq should be less than 1.0E-6/RY. Since the operating nuclear power plants was not designed against the severe accident and they have the limited exclusive mitigation facilities, it is not easy to meet the New Safety Goal. So, it is necessary to develop the alternative methods to meet the New Safety Goal. In this study, the amount of Cs-137 released to the

Preliminary Study for Application of the New Safety Goal related with the Limitation of Cs-137 release

International Nuclear Information System (INIS)

Seo, Mi Ro; Shin, Tae Young

2016-01-01

In the New Safety Goal, it is clearly stated that the Probabilistic Safety Assessment (PSA) should be performed with the proper technical appropriateness, the detail, and the scope in accordance with the integrated risk assessment against the accident for the nuclear power plants. This requirement is known to be come from the provision for preventing the long term ground contamination due to the release of radioactive material. However, there were so many concerns that this goal is so severe that the current design, even in the case of the constructing nuclear power plants, cannot meet this criterion. Especially for the operating nuclear power plants, since there were no mitigation facilities against the severe accident at the design stages, the application of this new goal is known to be much severe that the constructing nuclear power plants and it is necessary to develop the alternative methods to strengthen the safety of the operating nuclear power plants. The purpose of this study is to review the new safety goal from the view point of severe accident analysis and probabilistic safety assessment, and to find the appropriate methods in order to meet that goal for the operating nuclear power plants. In order to strengthen the safety for domestic nuclear power plants, all of the domestic operating nuclear power plants are required to prepare the Accident Management Plan within 3 years. Also, this Accident Management Plan should meet the New Safety Goal including the requirement that the sum of the accident frequency that the release of the radioactive nuclide Cs- 137 to the environment exceeds the 100TBq should be less than 1.0E-6/RY. Since the operating nuclear power plants was not designed against the severe accident and they have the limited exclusive mitigation facilities, it is not easy to meet the New Safety Goal. So, it is necessary to develop the alternative methods to meet the New Safety Goal. In this study, the amount of Cs-137 released to the

Hypersensitivity reaction studies of a polyethoxylated castor oil-free, liposome-based alternative paclitaxel formulation.

Science.gov (United States)

Wang, Hongbo; Cheng, Guang; Du, Yuan; Ye, Liang; Chen, Wenzhong; Zhang, Leiming; Wang, Tian; Tian, Jingwei; Fu, Fenghua

2013-03-01

The commercial drug paclitaxel (Taxol) may introduce hypersensitivity reactions associated with the polyethoxylated castor oil-ethanol solvent. To overcome these problems, we developed a polyethoxylated castor oil-free, liposome-based alternative paclitaxel formulation, known as Lipusu. In this study, we performed in vitro and in vivo experiments to compare the safety profiles of Lipusu and Taxol, with special regard to hypersensitivity reactions. First, Swiss mice were used to determine the lethal dosages, and then to evaluate hypersensitivity reactions, followed by histopathological examination and enzyme-linked immunosorbent assays (ELISAs) of serum SC5b-9 and lung histamine. Additionally, healthy human serum was used to analyze in vitro complement activation. Finally, an MTT assay was used to determine the in vitro anti-proliferation activity. Our data clearly showed that Lipusu displayed a much higher safety margin and did not induce hypersensitivity or hypersensitivity-related lung lesions, which may be associated with the fact that Lipusu did not activate complement or increase histamine release in vivo. Moreover, Lipusu did not promote complement activation in healthy human serum in vitro, and demonstrated anti-proliferative activity against human cancer cells, similar to that of Taxol. Therefore, the improved formulation of paclitaxel, which exhibited a much better safety profile and comparable cytotoxic activity to Taxol, may bring a number of benefits to cancer patients.

Fusion reactor safety studies, FY 1977

International Nuclear Information System (INIS)

Darby, J.B. Jr.

1978-04-01

This report reviews the technical progress in the fusion reactor safety studies performed during FY 1977 in the Fusion Power Program at the Argonne National Laboratory. The subjects reported on include safety considerations of the vacuum vessel and first-wall design for the ANL/EPR, the thermal responses of a tokamak reactor first wall, the vacuum wall electrical resistive requirements in relationship to magnet safety, and a major effort is reported on considerations and experiments on air detritiation

75 FR 26266 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2010-05-11

... Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH) In...) Public Law 92-463. Purpose: The Safety and Occupational Health Study Section will review, discuss, and... cycles pertaining to research issues in occupational safety and health, and allied areas. It is the...

Adaptation of the ToxRTool to Assess the Reliability of Toxicology Studies Conducted with Genetically Modified Crops and Implications for Future Safety Testing.

Science.gov (United States)

Koch, Michael S; DeSesso, John M; Williams, Amy Lavin; Michalek, Suzanne; Hammond, Bruce

2016-01-01

To determine the reliability of food safety studies carried out in rodents with genetically modified (GM) crops, a Food Safety Study Reliability Tool (FSSRTool) was adapted from the European Centre for the Validation of Alternative Methods' (ECVAM) ToxRTool. Reliability was defined as the inherent quality of the study with regard to use of standardized testing methodology, full documentation of experimental procedures and results, and the plausibility of the findings. Codex guidelines for GM crop safety evaluations indicate toxicology studies are not needed when comparability of the GM crop to its conventional counterpart has been demonstrated. This guidance notwithstanding, animal feeding studies have routinely been conducted with GM crops, but their conclusions on safety are not always consistent. To accurately evaluate potential risks from GM crops, risk assessors need clearly interpretable results from reliable studies. The development of the FSSRTool, which provides the user with a means of assessing the reliability of a toxicology study to inform risk assessment, is discussed. Its application to the body of literature on GM crop food safety studies demonstrates that reliable studies report no toxicologically relevant differences between rodents fed GM crops or their non-GM comparators.

Observational Studies on Evaluating the Safety and Adverse Effects of Traditional Chinese Medicine

Directory of Open Access Journals (Sweden)

Jung-Nein Lai

2013-01-01

Full Text Available Background. This study aims to share our experiences when carrying out observational studies of traditional Chinese medicine (TCM. Methods. We have proactively monitored the safety profiles of Duhuo Jisheng Tang (DJT, Suan Zao Ren Tang (SZRT, and TMN-1. A list of adverse events (AEs, complete blood counts, and liver and kidney function tests were obtained from the participants during their scheduled hospital visits. Retrospective observational studies were conducted based on the reimbursement database of the National Health Insurance system, Taiwan, to explore the relationship between the use of TCM that have been adulterated by aristolochic acid and the risk from both nephrotoxins and carcinogens. Results. A total of 221, 287, and 203 AEs were detected after SZRT, DJT, and TMN-1 had been taken, respectively. Dizziness, headache, stomach ache, and diarrhea were judged to be probably related to SZRT treatment. Retrospective observational studies found an association between the consumption of aristolochic acid-containing Chinese formulae such as Mu Tong and an increased risk of CKD, ESRD, and urinary tract cancer. Conclusion. Prospective and retrospective observational studies seem to have specific advantages when investigating the safety and adverse effects of TCM therapies, as well as possibly other alternative/complementary therapies.

Observational Studies on Evaluating the Safety and Adverse Effects of Traditional Chinese Medicine

Science.gov (United States)

Tang, Jin-Ling; Wang, Jung-Der

2013-01-01

Background. This study aims to share our experiences when carrying out observational studies of traditional Chinese medicine (TCM). Methods. We have proactively monitored the safety profiles of Duhuo Jisheng Tang (DJT), Suan Zao Ren Tang (SZRT), and TMN-1. A list of adverse events (AEs), complete blood counts, and liver and kidney function tests were obtained from the participants during their scheduled hospital visits. Retrospective observational studies were conducted based on the reimbursement database of the National Health Insurance system, Taiwan, to explore the relationship between the use of TCM that have been adulterated by aristolochic acid and the risk from both nephrotoxins and carcinogens. Results. A total of 221, 287, and 203 AEs were detected after SZRT, DJT, and TMN-1 had been taken, respectively. Dizziness, headache, stomach ache, and diarrhea were judged to be probably related to SZRT treatment. Retrospective observational studies found an association between the consumption of aristolochic acid-containing Chinese formulae such as Mu Tong and an increased risk of CKD, ESRD, and urinary tract cancer. Conclusion. Prospective and retrospective observational studies seem to have specific advantages when investigating the safety and adverse effects of TCM therapies, as well as possibly other alternative/complementary therapies. PMID:24159351

30 CFR 250.1504 - May I use alternative training methods?

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false May I use alternative training methods? 250... Safety Training § 250.1504 May I use alternative training methods? You may use alternative training methods. These methods may include computer-based learning, films, or their equivalents. This training...

Safety assessment of ammonia as a transport fuel

Energy Technology Data Exchange (ETDEWEB)

Duijm, N.J.; Markert, F.; Lundtang paulsen, Jette

2005-02-01

This report describes the safety study performed as part of the EU supported project 'Ammonia Cracking for Clean Electric Power Technology' The study addresses the following activities: safety of operation of the ammonia-powered vehicle under normal and accident (collision) conditions, safety of transport of ammonia to the refuelling stations and safety of the activities at the refuelling station (unloading and refuelling). Comparisons are made between the safety of using ammonia and the safety of other existing or alternative fuels. The conclusion is that the hazards in relation to ammonia need to be controlled by a combination of technical and regulatory measures. The most important requirements are: - Advanced safety systems in the vehicle - Additional technical measures and regulations are required to avoid releases in maintenance workshops and unauthorised maintenance on the fuel system - Road transport of ammonia to refuelling stations in refrigerated form - Sufficient safety zones between refuelling stations and residential or otherwise public areas. When these measures are applied, the use of ammonia as a transport fuel wouldnt cause more risks than currently used fuels (using current practice). (au)

Alternative method of highway traffic safety analysis for developing countries using delphi technique and Bayesian network.

Science.gov (United States)

Mbakwe, Anthony C; Saka, Anthony A; Choi, Keechoo; Lee, Young-Jae

2016-08-01

Highway traffic accidents all over the world result in more than 1.3 million fatalities annually. An alarming number of these fatalities occurs in developing countries. There are many risk factors that are associated with frequent accidents, heavy loss of lives, and property damage in developing countries. Unfortunately, poor record keeping practices are very difficult obstacle to overcome in striving to obtain a near accurate casualty and safety data. In light of the fact that there are numerous accident causes, any attempts to curb the escalating death and injury rates in developing countries must include the identification of the primary accident causes. This paper, therefore, seeks to show that the Delphi Technique is a suitable alternative method that can be exploited in generating highway traffic accident data through which the major accident causes can be identified. In order to authenticate the technique used, Korea, a country that underwent similar problems when it was in its early stages of development in addition to the availability of excellent highway safety records in its database, is chosen and utilized for this purpose. Validation of the methodology confirms the technique is suitable for application in developing countries. Furthermore, the Delphi Technique, in combination with the Bayesian Network Model, is utilized in modeling highway traffic accidents and forecasting accident rates in the countries of research. Copyright © 2016 Elsevier Ltd. All rights reserved.

Searching for Methods on Evaluation Alternatives and Studying Decision Making System Regarding Enhancing Publicity of Nuclear Spent Fuel

International Nuclear Information System (INIS)

Cho, Seongkyung; Choi, Seungho; Kim, Hyerim; Song, Jiyeon; Lee, Yoonsup; Sohn, Seohyun

2013-01-01

This study was done in order to anticipate the aspect of publicity enhancement on nuclear spent fuel so that it can find the evaluation methods of alternative ways of management which could applied actually and make the decision making system of Publicity Enhancement Committee in advance. In Korea, the nuclear spent fuel is temporarily stored inside of the nuclear facility field, and it is expected that Gori nuclear facility is going to be saturated since 2016 but the solutions are still incomplete. The problem of management of nuclear spent fuel is an important issue in terms of not only the nuclear power policy but also of safe management of the already made nuclear spent fuel. This study has its meaning to draw the evaluation criteria of the management alternatives on nuclear spent fuel which can be applied in Korean case, and to find the necessity of verifying the evaluation of management alternatives through Publicity Enhancement because of different stands according to the interests. As a result, rather than technological engineering safety evaluation, qualitative analysis in terms of social costs, quantitative evaluation in terms of economic costs, this study advises the methods of public hearings and citizen juries which are effective, which makes it meaningful

Advancing Alternative Analysis: Integration of Decision Science.

Science.gov (United States)

Malloy, Timothy F; Zaunbrecher, Virginia M; Batteate, Christina M; Blake, Ann; Carroll, William F; Corbett, Charles J; Hansen, Steffen Foss; Lempert, Robert J; Linkov, Igor; McFadden, Roger; Moran, Kelly D; Olivetti, Elsa; Ostrom, Nancy K; Romero, Michelle; Schoenung, Julie M; Seager, Thomas P; Sinsheimer, Peter; Thayer, Kristina A

2017-06-13

Decision analysis-a systematic approach to solving complex problems-offers tools and frameworks to support decision making that are increasingly being applied to environmental challenges. Alternatives analysis is a method used in regulation and product design to identify, compare, and evaluate the safety and viability of potential substitutes for hazardous chemicals. We assessed whether decision science may assist the alternatives analysis decision maker in comparing alternatives across a range of metrics. A workshop was convened that included representatives from government, academia, business, and civil society and included experts in toxicology, decision science, alternatives assessment, engineering, and law and policy. Participants were divided into two groups and were prompted with targeted questions. Throughout the workshop, the groups periodically came together in plenary sessions to reflect on other groups' findings. We concluded that the further incorporation of decision science into alternatives analysis would advance the ability of companies and regulators to select alternatives to harmful ingredients and would also advance the science of decision analysis. We advance four recommendations: a ) engaging the systematic development and evaluation of decision approaches and tools; b ) using case studies to advance the integration of decision analysis into alternatives analysis; c ) supporting transdisciplinary research; and d ) supporting education and outreach efforts. https://doi.org/10.1289/EHP483.

Center for Maritime Safety and Health Studies

Data.gov (United States)

Federal Laboratory Consortium — Established in November 2015, the Center for Maritime Safety and Health Studies (CMSHS) promotes safety and health for all maritime workers, including those employed...

Alternative approaches to providing engineering expertise on shift

International Nuclear Information System (INIS)

Olson, J.; Schreiber, R.E.; Melber, B.D.

1984-05-01

This report represents the conclusions of a project studying the role of engineering expertise on shift in nuclear power plants. Using the present shift technical advisor (STA) position as the base case, several alternatives are analyzed. On-shift alternatives included the STA, the SS (shift supervisor), and the SE (shift engineer). The SE is degreed, experienced, trained, and licensed as a Senior Reactor Operator. Some non-shift alternatives were also studied. These included a cadre of on-call engineers and specialists within continual contact and easy reach of the plant; a technical system of phone and data lines linking the plant with a facility similar to an on-site technical support center; and finally, an SPDS (safety parameter display system) to agument technical upgrading of operator aids presently available. Potential problems considered in the analysis of implementation of these alternatives included job content constraints, problems of crew acceptance, and problems of labor supply and retention. Of the considered alternatives, the SE and SS options appear superior to the current STA approach. The SE approach appears the easiest to implement and the most effective under varied plant conditions. The SE may also serve as liaison to off-site support facilities

Study on Fusion Safety Infrastructure using ISAM

International Nuclear Information System (INIS)

Oh, Kyemin; Kang, Myungsuk; Heo, Gyunyoung; Kim, Hyoungchan

2013-01-01

The regulation of nuclear facilities have checked and managed safety throughout the entire process from design, construction, operation and decommissioning. Also, the same meaning as the regulatory requirements and design requirements, it will be important indicators for detailed design of K-DEMO. K-DEMO has many uncertainties because it is in conceptual design phase. Also, there is no reference material because demonstration scale fusion power plants were not operated yet in overseas. So, hazard that threaten the integrity of K-DEMO have to be defined preferentially to define regulatory or design requirements. This study proposed method that educe regulatory or design requirements and introduce web-based cloud infrastructure to perform renewal and sharing of information related with safety that is required in the study rapidly as a part of the R and D program funded by National Fusion Research Institute of Korea (NFRI). We have been performing QSR and PIRT in accordance with development of fusion DEMO plant, and preparing OPT, PSA and DPA for regulation requirements. This study introduces our recent research activities about ISAM for fusion and CCI built for expert and extant safety related information. Unlike fission, nuclear fusion's safety goal is non-evacuation of the public during an accident. To satisfy this goal not only various safety issues should be analyzed, but safety objectives, regulatory requirements, and design variables should also be established in detailed design phase. The web-based cloud infrastructure proposed in this paper will be able to offer input data of future studies and, it is expected to contribute on general and technical safety principles for national fusion power plant technology plan

A total safety management model

International Nuclear Information System (INIS)

Obadia, I.J.; Vidal, M.C.R.; Melo, P.F.F.F.

2002-01-01

In nuclear organizations, quality and safety are inextricably linked. Therefore, the search for excellence means reaching excellence in nuclear safety. The International Atomic Energy Agency, IAEA, developed, after the Chernobyl accident, the organizational approach for improving nuclear safety based on the safety culture, which requires a framework necessary to provide modifications in personnel attitudes and behaviors in situations related to safety. This work presents a Total Safety Management Model, based on the Model of Excellence of the Brazilian Quality Award and on the safety culture approach, which represents an alternative to this framework. The Model is currently under validation at the Nuclear Engineering Institute, in Rio de Janeiro, Brazil, and the results of its initial safety culture self assessment are also presented and discussed. (author)

The first symposium of Research Center for Radiation Safety, NIRS. Perspective of future studies of radiation safety

International Nuclear Information System (INIS)

Shimo, Michikuni

2002-03-01

This paper summarizes presentations given in the title symposium, held at the Conference Room of National Institute of Radiological Sciences (NIRS) on November 29 and 30, 2001. Contained are Introductory remarks: Basic presentations concerning exposure dose in man; Environmental levels of radiation and radioactivity, environmental radon level and exposure dose, and radiation levels in the specific environment (like in the aircraft): Special lecture (biological effects given by space environment) concerning various needs for studies of radiation safety; Requirement for open investigations, from the view of utilization, research and development of atomic energy, from the clinical aspect, and from the epidemiological aspect: Special lecture (safety in utilization of atomic energy and radiation-Activities of Nuclear Safety Commission of Japan) concerning present state and perspective of studies of radiation safety; Safety of radiation and studies of biological effects of radiation-perspective, and radiation protection and radiation safety studies: Studies in the Research Center for Radiation Safety; Summary of studies in the center, studies of the biological effects of neutron beam, carcinogenesis by radiation and living environmental factors-complicated effects, and studies of hereditary effects: Panel discussion (future direction of studies of radiation safety for the purpose of the center's direction): and concluding remarks. (N.I.)

Hopewell Furnace NHS : alternative transportation study

Science.gov (United States)

2009-12-31

This study assesses the potential for an alternative transportation system (ATS) at Hopewell Furnace National Historic Site (NHS). The Volpe Center investigated internal circulation and potential partnerships with local historic, cultural, and recrea...

Researchers studying alternative to bladder removal for bladder cancer patients | Center for Cancer Research

Science.gov (United States)

A new phase I clinical trial conducted by researchers at the Center for Cancer Research (CCR) is evaluating the safety and tolerability, or the degree to which any side effects can be tolerated by patients, of a two-drug combination as a potential alternative to bladder removal for bladder cancer patients. The trial targets patients with non-muscle invasive bladder cancer (NMIBC) whose cancers have stopped responding to traditional therapies. Read more...

Lessons learned from measuring safety culture: an Australian case study.

Science.gov (United States)

Allen, Suellen; Chiarella, Mary; Homer, Caroline S E

2010-10-01

adverse events in maternity care are relatively common but often avoidable. International patient safety strategies advocate measuring safety culture as a strategy to improve patient safety. Evidence suggests it is necessary to fully understand the safety culture of an organisation to make improvements to patient safety. this paper reports a case study examining the safety culture in one maternity service in Australia and considers the benefits of using surveys and interviews to understand safety culture as an approach to identify possible strategies to improve patient safety in this setting. the study took place in one maternity service in two public hospitals in NSW, Australia. Concurrently, both hospitals were undergoing an organisational restructure which was part of a major health reform agenda. The priorities of the reform included improving the quality of care and patient safety; and, creating a more efficient health system by reducing administration inefficiencies and duplication. a descriptive case study using three approaches: the safety culture was identified to warrant improvement across all six safety culture domains. There was reduced infrastructure and capacity to support incident management activities required to improve safety, which was influenced by instability from the organisational restructure. There was a perceived lack of leadership at all levels to drive safety and quality and improving the safety culture was neither a key priority nor was it valued by the organisation. the safety culture was complex as was undertaking this study. We were unable to achieve a desired 60% response rate highlighting the limitations of using safety culture surveys in isolation as a strategy to improve safety culture. Qualitative interviews provided greater insight into the factors influencing the safety culture. The findings of this study provide evidence of the benefits of including qualitative methods with quantitative surveys when examining safety culture

78 FR 68783 - Refuge Alternatives for Underground Coal Mines

Science.gov (United States)

2013-11-15

... Alternatives for Underground Coal Mines AGENCY: Mine Safety and Health Administration, Labor. ACTION: Reopen... coal mines. The U.S. Court of Appeals for the District of Columbia Circuit remanded a training... for refuge alternatives in underground coal mines. On January 13, 2009, the United Mine Workers of...

Ranking of sabotage/tampering avoidance technology alternatives

Energy Technology Data Exchange (ETDEWEB)

Andrews, W.B.; Tabatabai, A.S.; Powers, T.B.; Daling, P.M.; Fecht, B.A.; Gore, B.F.; Overcast, T.D.; Rankin, W.R.; Schreiber, R.E.; Tawil, J.J.

1986-01-01

Pacific Northwest Laboratory conducted a study to evaluate alternatives to the design and operation of nuclear power plants, emphasizing a reduction of their vulnerability to sabotage. Estimates of core melt accident frequency during normal operations and from sabotage/tampering events were used to rank the alternatives. Core melt frequency for normal operations was estimated using sensitivity analysis of results of probabilistic risk assessments. Core melt frequency for sabotage/tampering was estimated by developing a model based on probabilistic risk analyses, historic data, engineering judgment, and safeguards analyses of plant locations where core melt events could be initiated. Results indicate the most effective alternatives focus on large areas of the plant, increase safety system redundancy, and reduce reliance on single locations for mitigation of transients. Less effective options focus on specific areas of the plant, reduce reliance on some plant areas for safe shutdown, and focus on less vulnerable targets.

Ranking of sabotage/tampering avoidance technology alternatives

International Nuclear Information System (INIS)

Andrews, W.B.; Tabatabai, A.S.; Powers, T.B.

1986-01-01

Pacific Northwest Laboratory conducted a study to evaluate alternatives to the design and operation of nuclear power plants, emphasizing a reduction of their vulnerability to sabotage. Estimates of core melt accident frequency during normal operations and from sabotage/tampering events were used to rank the alternatives. Core melt frequency for normal operations was estimated using sensitivity analysis of results of probabilistic risk assessments. Core melt frequency for sabotage/tampering was estimated by developing a model based on probabilistic risk analyses, historic data, engineering judgment, and safeguards analyses of plant locations where core melt events could be initiated. Results indicate the most effective alternatives focus on large areas of the plant, increase safety system redundancy, and reduce reliance on single locations for mitigation of transients. Less effective options focus on specific areas of the plant, reduce reliance on some plant areas for safe shutdown, and focus on less vulnerable targets

Nuclear reactor safety in the USA

International Nuclear Information System (INIS)

Vigil, J.C.

1983-01-01

Nuclear reactor safety in the USA has emphasized a defense-in-depth approach to protecting the public from reactor accidents. This approach was severely tested by the Three Mile Island accident and was found to be effective in safeguarding the public health and safety. However, the economic impact of the TMI accident was very large. Consequently, more attention is now being given to plant protection as well as public-health protection in reactor-safety studies. Sophisticated computer simulations at Los Alamos are making major contributions in this area. In terms of public risk, nuclear power plants compare favorably with other large-scale alternatives to electricity generation. Unfortunately, there is a large gulf between the real risks of nuclear power and the present public perception of these risks

Utilization of Alternative Medical Services In An Urban Centre Of ...

African Journals Online (AJOL)

Alasia Datonye

Safety of AT Use by Respondents. Out of the 312 ... target population, their behaviour and safety of practice .... herbs still being sold in soft drink/beer bottles or wrapped in torn old ... traditional and alternative medicine in the management of.

Operational safety system performance alternative to the WANO's indicator

International Nuclear Information System (INIS)

Lyra, Moacir

2002-01-01

One of the operational safety performance indicators recommended by the World Association of Nuclear Operators (WANO) and adopted by Electronuclear is the reliability of the safety systems. The parameter selected to represent this indicator is the average unavailability of the trains of the concerned system. This parameter would be universally representative of the reliability for comparison purpose only if all nuclear power plants were designed within the same redundancy criteria. Considering the diversity of design criteria of the power plants in operation and based on a probabilistic approach, this paper proposes new performance indicators which are comparable regardless the redundancy criteria of the system. A case example applied to a system of the Angra 2 nuclear power plant shows that, even though with the plant in the infancy phase, the performance of the system in the period is very good. (author)

A study of alternative refrigerants for the refrigeration and air conditioning sector in Mauritius

Science.gov (United States)

Dreepaul, R. K.

2017-11-01

The most frequently used refrigerants in the refrigeration and air conditioning (RAC) sector in Mauritius are currently hydrochlorofluorocarbons (HCFC) and hydrofluorocarbons (HFC). However, because of their strong influence on global warming and the impact of HCFCs on the ozone layer, refrigerants such as ammonia (NH3), carbon dioxide (CO2) and Hydrocarbons (HC), having minimal impact on the environment, are being considered. So far, HCs have only been safely used in domestic refrigeration. Ammonia has been used mainly for industrial refrigeration whereas CO2 is still under study. In this paper, a comparative study of the various feasible alternatives is presented in a survey that was undertaken with major stake holders in the field. The retrofitting possibility of existing equipment was assessed and safety issues associated with each refrigerant were analysed. The major setback of hydrocarbons as a widely accepted refrigerant is its flammability which was considered as a major safety hazard by the majority of respondents in the survey and the main advantages are the improved equipment coefficient of performance (COP) and better TEWI factor. This resulted in a 12 % drop in energy consumption. Despite the excellent thermodynamic properties of ammonia, its use has mainly been confined to industrial refrigeration due to its toxicity. In Mauritius, the performance of ammonia in air conditioning is being evaluated on a pilot basis. The major setback of carbon dioxide as a refrigerant is the high operating pressure which is considered a safety hazard. The high initial investment cost and the lack of qualified maintenance technician is also an issue. The use of CO2 is mainly being considered in the commercial refrigeration sector.

Angra-1 probabilistic safety study-phase B

International Nuclear Information System (INIS)

Fernandes Filho, T.L.; Gibelli, S.M.O.

1988-05-01

This study represents the Phase B of the Angra-1 Probabilistic Safety Study and is the the final report prepared for the IAEA under Research Contract No. 3423/R2/RB. The three main items covered in this report are the establishment of interim safety goals, analysis of Angra-1 operational experience and development of emergency procedures to address severe accidents. For establishment of interim safety goals a methodology for calculating consequences and risks associated to the Angra-1 operation was developed based on the available data and codes. The proposed safety goals refer to the individual risk of early fatality for people living in the vicinity of the plant, colective risk of cancer fatalities for people living near the plant, the propobability of core melt occurrence and the probability of dominant accident sequences. (author) [pt

Behavioral integrity for safety, priority of safety, psychological safety, and patient safety : a team-level study

NARCIS (Netherlands)

Leroy, H.; Dierynck, B.; Anseel, F.; Simons, T.; Halbesleben, J.R.; McCaughey, D.; Savage, G.T.; Sels, L.

2012-01-01

This article clarifies how leader behavioral integrity for safety helps solve follower's double bind between adhering to safety protocols and speaking up about mistakes against protocols. Path modeling of survey data in 54 nursing teams showed that head nurse behavioral integrity for safety

A study on safety climate at nuclear power plants

International Nuclear Information System (INIS)

Fukui, Hirokazu; Yoshida, Michio; Yoshiyama, Naohiro

2001-01-01

In the current study, we define safety climate as an organizational environment that induces members of the organization to give consideration to safety or take safety actions. It is of utmost importance that people holding managerial positions in an organization have a good understanding of the characteristics of the safety climate of the organization and implement safety promotion activities effectively. In the current research, we studied the rating scales and the characteristics of a safety climate. A survey was conducted, targeting technical engineers who belong to the three power stations of Kansai Electric Power Co., Inc. The questionnaire mainly consisted of questions concerning safety measures taken by individuals and questions concerning safety measures taken by the organization, to which the individuals belong. As a result of a factor analysis of the responses, we extracted five factors, namely, 'confidence in knowledge and skill', attitude of supervisors,' 'safety education in workplace', 'clarity of tasks' and 'safety confirmation/report'. In studying the rating scales of the safety climate, we selected five items from each of the above five factors, and used the total scores of the ratings of the five items as scores of each factor. Then, we examined the correlation between scores of personal factors and scores of organizational environment factors. We treated the scores of safety confirmation/report' and 'confidence in knowledge and skill', which are personal factors, as criterion variables, and the scores of 'attitude of supervisors', 'safety education in workplace' and 'clarity of tasks', which are organizational environment factors, as predictor variables. As a result, we found that levels of 'safety confirmation/report' and 'confidence in knowledge and skill' can be deduced from the scores of 'attitude of supervisors', 'safety education in workplace' and 'clarity of tasks.' Hence, we have decided to use these three organizational environment

Safety and sensory aspects of nitrite alternatives in meat curing

International Nuclear Information System (INIS)

Shahidi, F.; Pegg, R.B.

1991-01-01

The use of nitrite to cure meats (especially bacon) is viewed as undesirable, because it leads to the formation of carcinogenic nitrosamines. The amount of nitrite (10-40 ppm) associated with the cured colour and flavour is fairly harmless, and it is the larger amount, (100-200 ppm) added to preserve the meat, which is potentially harmful. This article reviews various preservatives which can be used in combination with low concentrations of nitrate. The authors consider that the use of lactate, of alternatively radiation sterilization, offers the best safe alternative to nitrate

Criticality safety basics, a study guide

Energy Technology Data Exchange (ETDEWEB)

V. L. Putman

1999-09-01

This document is a self-study and classroom guide, for criticality safety of activities with fissile materials outside nuclear reactors. This guide provides a basic overview of criticality safety and criticality accident prevention methods divided into three parts: theory, application, and history. Except for topic emphasis, theory and history information is general, while application information is specific to the Idaho National Engineering and Environmental Laboratory (INEEL). Information presented here should be useful to personnel who must know criticality safety basics to perform their assignments safely or to design critically safe equipment or operations. However, the guide's primary target audience is fissile material handler candidates.

Criticality safety basics, a study guide

International Nuclear Information System (INIS)

Putman, V.L.

1999-01-01

This document is a self-study and classroom guide, for criticality safety of activities with fissile materials outside nuclear reactors. This guide provides a basic overview of criticality safety and criticality accident prevention methods divided into three parts: theory, application, and history. Except for topic emphasis, theory and history information is general, while application information is specific to the Idaho National Engineering and Environmental Laboratory (INEEL). Information presented here should be useful to personnel who must know criticality safety basics to perform their assignments safely or to design critically safe equipment or operations. However, the guide's primary target audience is fissile material handler candidates

Aviation Fuel System Reliability and Fail-Safety Analysis. Promising Alternative Ways for Improving the Fuel System Reliability

Directory of Open Access Journals (Sweden)

I. S. Shumilov

2017-01-01

Full Text Available The paper deals with design requirements for an aviation fuel system (AFS, AFS basic design requirements, reliability, and design precautions to avoid AFS failure. Compares the reliability and fail-safety of AFS and aircraft hydraulic system (AHS, considers the promising alternative ways to raise reliability of fuel systems, as well as elaborates recommendations to improve reliability of the pipeline system components and pipeline systems, in general, based on the selection of design solutions.It is extremely advisable to design the AFS and AHS in accordance with Aviation Regulations АП25 and Accident Prevention Guidelines, ICAO (International Civil Aviation Association, which will reduce risk of emergency situations, and in some cases even avoid heavy disasters.ATS and AHS designs should be based on the uniform principles to ensure the highest reliability and safety. However, currently, this principle is not enough kept, and AFS looses in reliability and fail-safety as compared with AHS. When there are the examined failures (single and their combinations the guidelines to ensure the AFS efficiency should be the same as those of norm-adopted in the Regulations АП25 for AHS. This will significantly increase reliability and fail-safety of the fuel systems and aircraft flights, in general, despite a slight increase in AFS mass.The proposed improvements through the use of components redundancy of the fuel system will greatly raise reliability of the fuel system of a passenger aircraft, which will, without serious consequences for the flight, withstand up to 2 failures, its reliability and fail-safety design will be similar to those of the AHS, however, above improvement measures will lead to a slightly increasing total mass of the fuel system.It is advisable to set a second pump on the engine in parallel with the first one. It will run in case the first one fails for some reasons. The second pump, like the first pump, can be driven from the

78 FR 48591 - Refuge Alternatives for Underground Coal Mines

Science.gov (United States)

2013-08-08

... Administration 30 CFR Parts 7 and 75 Refuge Alternatives for Underground Coal Mines; Proposed Rules #0;#0;Federal... Underground Coal Mines AGENCY: Mine Safety and Health Administration, Labor. ACTION: Limited reopening of the... for miners to deploy and use refuge alternatives in underground coal mines. The U.S. Court of Appeals...

Safety certification of airborne software: An empirical study

International Nuclear Information System (INIS)

Dodd, Ian; Habli, Ibrahim

2012-01-01

Many safety-critical aircraft functions are software-enabled. Airborne software must be audited and approved by the aerospace certification authorities prior to deployment. The auditing process is time-consuming, and its outcome is unpredictable, due to the criticality and complex nature of airborne software. To ensure that the engineering of airborne software is systematically regulated and is auditable, certification authorities mandate compliance with safety standards that detail industrial best practice. This paper reviews existing practices in software safety certification. It also explores how software safety audits are performed in the civil aerospace domain. The paper then proposes a statistical method for supporting software safety audits by collecting and analysing data about the software throughout its lifecycle. This method is then empirically evaluated through an industrial case study based on data collected from 9 aerospace projects covering 58 software releases. The results of this case study show that our proposed method can help the certification authorities and the software and safety engineers to gain confidence in the certification readiness of airborne software and predict the likely outcome of the audits. The results also highlight some confidentiality issues concerning the management and retention of sensitive data generated from safety-critical projects.

Quality management of pharmacology and safety pharmacology studies

DEFF Research Database (Denmark)

Spindler, Per; Seiler, Jürg P

2002-01-01

to safety pharmacology studies, and, when indicated, to secondary pharmacodynamic studies, does not influence the scientific standards of studies. However, applying formal GLP standards will ensure the quality, reliability and integrity of studies, which reflect sound study management. It is important...... to encourage a positive attitude among researchers and academics towards these lines, whenever possible. GLP principles applied to the management of non-clinical safety studies are appropriate quality standards when studies are used in the context of protecting public health, and these quality standards...... of pharmacology studies (ICH S7A): primary pharmacodynamic, secondary pharmacodynamic and safety pharmacology studies, and guidance on the quality standards (expectations for GLP conformity) for these study types have been provided. Primary pharmacodynamic studies are the only study types that are fully exempt...

A study on safety climate at nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Fukui, Hirokazu [Institute of Nuclear Safety System Inc., Mihama, Fukui (Japan); Yoshida, Michio; Yoshiyama, Naohiro [Japan Institute for Group Dynamics, Fukuoka (Japan)

2001-09-01

In the current study, we define safety climate as an organizational environment that induces members of the organization to give consideration to safety or take safety actions. It is of utmost importance that people holding managerial positions in an organization have a good understanding of the characteristics of the safety climate of the organization and implement safety promotion activities effectively. In the current research, we studied the rating scales and the characteristics of a safety climate. A survey was conducted, targeting technical engineers who belong to the three power stations of Kansai Electric Power Co., Inc. The questionnaire mainly consisted of questions concerning safety measures taken by individuals and questions concerning safety measures taken by the organization, to which the individuals belong. As a result of a factor analysis of the responses, we extracted five factors, namely, 'confidence in knowledge and skill', attitude of supervisors,' 'safety education in workplace', 'clarity of tasks' and 'safety confirmation/report'. In studying the rating scales of the safety climate, we selected five items from each of the above five factors, and used the total scores of the ratings of the five items as scores of each factor. Then, we examined the correlation between scores of personal factors and scores of organizational environment factors. We treated the scores of safety confirmation/report' and 'confidence in knowledge and skill', which are personal factors, as criterion variables, and the scores of 'attitude of supervisors', 'safety education in workplace' and 'clarity of tasks', which are organizational environment factors, as predictor variables. As a result, we found that levels of 'safety confirmation/report' and 'confidence in knowledge and skill' can be deduced from the scores of 'attitude of supervisors', 'safety

Safety and efficacy of ofatumumab in relapsing-remitting multiple sclerosis

DEFF Research Database (Denmark)

Sorensen, Per S; Lisby, Steen; Grove, Richard

2014-01-01

OBJECTIVES: We present the first study to explore safety and efficacy of the human CD20 monoclonal antibody ofatumumab in relapsing-remitting multiple sclerosis (RRMS). METHODS: In this randomized, double-blind, placebo-controlled study, patients received 2 ofatumumab infusions (100 mg, 300 mg......, or 700 mg) or placebo 2 weeks apart. At week 24, patients received alternate treatment. Safety and efficacy were assessed. RESULTS: Thirty-eight patients were randomized (ofatumumab/placebo, n = 26; placebo/ofatumumab, n = 12) and analyzed; 36 completed the study. Two patients in the 300-mg group...

46 CFR 61.40-6 - Periodic safety tests.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Periodic safety tests. 61.40-6 Section 61.40-6 Shipping... INSPECTIONS Design Verification and Periodic Testing of Vital System Automation § 61.40-6 Periodic safety tests. (a) Periodic Safety tests must demonstrate the proper operation of the primary and alternate...

Study on 'Safety qualification of process computers used in safety systems of nuclear power plants'

International Nuclear Information System (INIS)

Bertsche, K.; Hoermann, E.

1991-01-01

The study aims at developing safety standards for hardware and software of computer systems which are increasingly used also for important safety systems in nuclear power plants. The survey of the present state-of-the-art of safety requirements and specifications for safety-relevant systems and, additionally, for process computer systems has been compiled from national and foreign rules. In the Federal Republic of Germany the KTA safety guides and the BMI/BMU safety criteria have to be observed. For the design of future computer-aided systems in nuclear power plants it will be necessary to apply the guidelines in [DIN-880] and [DKE-714] together with [DIN-192]. With the aid of a risk graph the various functions of a system, or of a subsystem, can be evaluated with regard to their significance for safety engineering. (orig./HP) [de

Environmental Regulation and Food Safety: Studies of Protection ...

International Development Research Centre (IDRC) Digital Library (Canada)

Environmental Regulation and Food Safety: Studies of Protection and Protectionism. Book cover Environmental Regulation and Food Safety: Studies of Protection and Protectionism. Directeur(s) : Veena Jha. Maison(s) d'édition : Edward Elgar, IDRC. 1 janvier 2006. ISBN : 184542512X. 250 pages. e-ISBN : 155250185X.

Effects of psychological stress test on the cardiac response of public safety workers: alternative parameters to autonomic balance

Science.gov (United States)

Huerta-Franco, M. R.; Vargas-Luna, F. M.; Delgadillo-Holtfort, I.

2015-01-01

It is well known that public safety workers (PSW) face many stressful situations that yield them as high-risk population for suffering chronic stress diseases. In this multidisciplinary research the cardiac response to induced psychological stress by a short duration Stroop test was evaluated in 20 female and 19 male PSW, in order to compare traditionally used cardiac response parameters with alternative ones. Electrocardiograms have been recorded using the Eindhoven electrodes configuration for 1 min before, 3 min during and 1 min after the test. Signals analysis has been performed for the heart rate and the power spectra of its variability and of the variability of the amplitude of the R-wave, i.e. the highest peak of the electrocardiographic signal periodic sequence. The results demonstrated that the traditional autonomic balance index shows no significant differences between stages. In contrast, the median of the area of the power spectrum of the R-wave amplitude variability in the frequency region dominated by the autonomous nervous system (0.04-to-0.4 Hz) is the more sensitive parameter. Moreover, this parameter allows to identify gender differences consistent with those encountered in other studies.

Effects of psychological stress test on the cardiac response of public safety workers: alternative parameters to autonomic balance

International Nuclear Information System (INIS)

Huerta-Franco, M R; Vargas-Luna, F M; Delgadillo-Holtfort, I

2015-01-01

It is well known that public safety workers (PSW) face many stressful situations that yield them as high-risk population for suffering chronic stress diseases. In this multidisciplinary research the cardiac response to induced psychological stress by a short duration Stroop test was evaluated in 20 female and 19 male PSW, in order to compare traditionally used cardiac response parameters with alternative ones. Electrocardiograms have been recorded using the Eindhoven electrodes configuration for 1 min before, 3 min during and 1 min after the test. Signals analysis has been performed for the heart rate and the power spectra of its variability and of the variability of the amplitude of the R-wave, i.e. the highest peak of the electrocardiographic signal periodic sequence. The results demonstrated that the traditional autonomic balance index shows no significant differences between stages. In contrast, the median of the area of the power spectrum of the R-wave amplitude variability in the frequency region dominated by the autonomous nervous system (0.04-to-0.4 Hz) is the more sensitive parameter. Moreover, this parameter allows to identify gender differences consistent with those encountered in other studies

Nitrogen-system safety study: Portsmouth Gaseous Diffusion Plant

International Nuclear Information System (INIS)

1982-07-01

The Department of Energy has primary responsibility for the safety of operations at DOE-owned nuclear facilities. The guidelines for the analysis of credible accidents are outlined in DOE Order 5481.1. DOE has requested that existing plant facilities and operations be reviewed for potential safety problems not covered by standard industrial safety procedures. This review is being conducted by investigating individual facilities and documenting the results in Safety Study Reports which will be compiled to form the Existing Plant Final Safety Analysis Report which is scheduled for completion in September, 1984. This Safety Study documents the review of the Plant Nitrogen System facilities and operations and consists of Section 4.0, Facility and Process Description, and Section 5.0, Accident Analysis, of the Final Safety Analysis Report format. The existing nitrogen system consists of a Superior Air Products Company Type D Nitrogen Plant, nitrogen storage facilities, vaporization facilities and a distribution system. The system is designed to generate and distribute nitrogen gas used in the cascade for seal feed, buffer systems, and for servicing equipment when exceptionally low dew points are required. Gaseous nitrogen is also distributed to various process auxiliary buildings. The average usage is approximately 130,000 standard cubic feet per day

On Safety Management. A Frame of Reference for Studies of Safety Management with Examples From Non-Nuclear Contexts of Relevance for Nuclear Safety

International Nuclear Information System (INIS)

Svensson, Ola; Salo, Ilkka; Allwin, Pernilla

2004-11-01

A good knowledge about safety management from risk technologies outside the area of nuclear power may contribute to both broaden the perspectives on safety management in general, and point at new opportunities for improving safety measures within the nuclear industry. First, a theoretical framework for the study of safety management in general is presented, followed by three case studies on safety management from different non-nuclear areas with potential relevance for nuclear safety. The chapters are written as separate reports and can be read independently of each other. The nuclear industry has a long experience about the management of risky activities, involving all the stages from planing to implementation, both on a more generalized level and in the specific branches of activities (management, administration, operation, maintenance, etc.). Here, safety management is a key concept related to these areas of activities. Outside the field of nuclear power there exist a number of different non-nuclear risk technologies, each one with their own specific needs and experiences about safety management. The differences between the areas consist partly of the different experiences caused by the different technologies. Besides using own experiences in safety practices within the own areas of activities, it may be profitable to take advantage in knowledge and experiences from one area and put it in practice in another area. In order to facilitate knowledge transfer from one technological area to another it may be possible to adapt a common theoretical model, for descriptions and explanations, to the different technologies. Such a model should admit that common denominators for safety management across the areas might be identified and described with common concepts. Systems theory gives the opportunity to not only create models that are descriptive for events within the limits of a given technology, but also to generate knowledge that can be transferred to other

Analysis of policy alternatives on the public acceptance of nuclear power plant in Korea

International Nuclear Information System (INIS)

Choi, Young-Sung; Lee, Byong-Whi

1995-01-01

Public acceptance has become an important factor in nuclear power program particularly after Chernobyl accident and recent rapid democratization in Korea. A method reflecting public opinions in order to improve public acceptance is to find out the public preference values for its policy alternatives. In this study, the conjoint analysis was applied to find out the quantitative values of public preferences for twelve policy alternatives to support communities surrounding nuclear power plants in Korea. To implement the analysis, questionnaires of trade-off matrix form were mailed to the science teachers of middle or high school through-out the country who had the experience of visiting nuclear power plant. The quantitative preference values for potential policy alternatives were estimated, which made it possible to forecast the effectiveness of each option. It was revealed that the improvement of reactor safety 100 times and the establishment of civilian monitoring system for nuclear safety would be two best options to improve public acceptance of nuclear power in Korea. (author)

Probabilistic safety analysis procedures guide

International Nuclear Information System (INIS)

Papazoglou, I.A.; Bari, R.A.; Buslik, A.J.

1984-01-01

A procedures guide for the performance of probabilistic safety assessment has been prepared for interim use in the Nuclear Regulatory Commission programs. The probabilistic safety assessment studies performed are intended to produce probabilistic predictive models that can be used and extended by the utilities and by NRC to sharpen the focus of inquiries into a range of tissues affecting reactor safety. This guide addresses the determination of the probability (per year) of core damage resulting from accident initiators internal to the plant and from loss of offsite electric power. The scope includes analyses of problem-solving (cognitive) human errors, a determination of importance of the various core damage accident sequences, and an explicit treatment and display of uncertainties for the key accident sequences. Ultimately, the guide will be augmented to include the plant-specific analysis of in-plant processes (i.e., containment performance) and the risk associated with external accident initiators, as consensus is developed regarding suitable methodologies in these areas. This guide provides the structure of a probabilistic safety study to be performed, and indicates what products of the study are essential for regulatory decision making. Methodology is treated in the guide only to the extent necessary to indicate the range of methods which is acceptable; ample reference is given to alternative methodologies which may be utilized in the performance of the study

Studying the Safety Impact of Autonomous Vehicles Using Simulation-Based Surrogate Safety Measures

Directory of Open Access Journals (Sweden)

Mark Mario Morando

2018-01-01

Full Text Available Autonomous vehicle (AV technology has advanced rapidly in recent years with some automated features already available in vehicles on the market. AVs are expected to reduce traffic crashes as the majority of crashes are related to driver errors, fatigue, alcohol, or drugs. However, very little research has been conducted to estimate the safety impact of AVs. This paper aims to investigate the safety impacts of AVs using a simulation-based surrogate safety measure approach. To this end, safety impacts are explored through the number of conflicts extracted from the VISSIM traffic microsimulator using the Surrogate Safety Assessment Model (SSAM. Behaviours of human-driven vehicles (HVs and AVs (level 4 automation are modelled within the VISSIM’s car-following model. The safety investigation is conducted for two case studies, that is, a signalised intersection and a roundabout, under various AV penetration rates. Results suggest that AVs improve safety significantly with high penetration rates, even when they travel with shorter headways to improve road capacity and reduce delay. For the signalised intersection, AVs reduce the number of conflicts by 20% to 65% with the AV penetration rates of between 50% and 100% (statistically significant at p<0.05. For the roundabout, the number of conflicts is reduced by 29% to 64% with the 100% AV penetration rate (statistically significant at p<0.05.

Contribution of operating feedback to probabilistic safety studies

International Nuclear Information System (INIS)

Guio, J.M. de; Lannoy, A.

1992-03-01

This paper presents the method used for PWR unit operation feedback analysis and its contribution to probabilistic safety studies. The targets were as follows: - use of failure data banks to assess reliability parameters, - use of event data banks to identify and quantify main system initiating events, - determination of a standard operating profile. These studies, performed in the context of nuclear power plant safety programs, prove useful not only to safety engineers but also to equipment experts, designers, operators and maintenance specialists. They constitute basic data for studies in all these areas or the departure point for new investigations. (authors). 3 figs., 3 tabs., 3 refs

Criticality safety studies at VTT Energy

International Nuclear Information System (INIS)

Roine, T.; Anttila, M.

1995-01-01

At VTT Energy a compact reactor physics calculation system is applied in many kind of problems. Generation of group constants for static and dynamic core calculations, flux and dose rate calculations as well as criticality safety studies are performed basically with the same codes. In the presentation a short overview of the wide variety of criticality safety problems analyzed at VTT Energy is given. The calculation system with some illustrative examples is also described. (12 refs., 1 tab.)

The German nuclear power plant safety study

International Nuclear Information System (INIS)

1979-01-01

With this study a new approach has been chosen, taking nuclear power plants as an example to assess and to describe the risks arising from the use of modern technology, including those hazards emanating from the rather hypothetical possibility of occurrence of very serious accidents. Following the definition of basic concepts and methods to be applied in risk assessment studied, as well as a brief account of the design and operating mode of nuclear power plants with PWRs', accidents and failures to be considered in a safety study are described. Using the course-of-event and fault tree analysis, the probability of fission product release as a consequence of failures in safety systems or of core meltdown is evaluated. Subsequently, the theoretical model for assessment of reactor accident consequences is presented, discussing such aspects as the dispersion of radioactivity in the atmosphere, the radiation dose model, safety and countermeasures, the model for the evaluation of health hazards as well as methods and calculations for estimating the reliability of risk assessments together with the remaining uncertainties. In an appendix to this study, the analyses presented in the study are discussed in the light of the TMI-2 event. This safety study showing the possibilities of detecting, keeping in check and minimizing harmful effects, can be regarded as a contribution to a better understanding of our modern, highly industrialised society, and eventually to an improvement of the quality of life. (GL) 891 GL/GL 892 MB [de

On Safety Management. A Frame of Reference for Studies of Safety Management with Examples From Non-Nuclear Contexts of Relevance for Nuclear Safety

Energy Technology Data Exchange (ETDEWEB)

Svensson, Ola; Salo, Ilkka; Allwin, Pernilla (Risk Analysis, Social and Decision Research Unit, Dept. of Psychology, Stockholm Univ., Stockholm (Sweden))

2004-11-15

A good knowledge about safety management from risk technologies outside the area of nuclear power may contribute to both broaden the perspectives on safety management in general, and point at new opportunities for improving safety measures within the nuclear industry. First, a theoretical framework for the study of safety management in general is presented, followed by three case studies on safety management from different non-nuclear areas with potential relevance for nuclear safety. The chapters are written as separate reports and can be read independently of each other. The nuclear industry has a long experience about the management of risky activities, involving all the stages from planing to implementation, both on a more generalized level and in the specific branches of activities (management, administration, operation, maintenance, etc.). Here, safety management is a key concept related to these areas of activities. Outside the field of nuclear power there exist a number of different non-nuclear risk technologies, each one with their own specific needs and experiences about safety management. The differences between the areas consist partly of the different experiences caused by the different technologies. Besides using own experiences in safety practices within the own areas of activities, it may be profitable to take advantage in knowledge and experiences from one area and put it in practice in another area. In order to facilitate knowledge transfer from one technological area to another it may be possible to adapt a common theoretical model, for descriptions and explanations, to the different technologies. Such a model should admit that common denominators for safety management across the areas might be identified and described with common concepts. Systems theory gives the opportunity to not only create models that are descriptive for events within the limits of a given technology, but also to generate knowledge that can be transferred to other

Safety Assessment for a KBS-3H spent nuclear fuel repository at Olkiluoto

International Nuclear Information System (INIS)

Smith, P.; Neall, F.; Snellman, M.; Pastina, B.; Hjerpe, T.; Nordman, H.; Johnson, L.

2007-12-01

The KBS-3 method, based on multiple barriers, is the proposed spent fuel disposal method both in Sweden and Finland. KBS-3H and KBS-3V are the two design alternatives of the KBS-3 spent fuel disposal method. Posiva and SKB have conducted a joint research, demonstration and development (RD and D) programme in 2002-2007 with the overall aim of establishing whether KBS-3H represents a feasible alternative to the reference alternative KBS-3V. The overall objectives of the present phase covering the period 2004-2007 have been to demonstrate that the horizontal deposition alternative is technically feasible and to demonstrate that it fulfils the same long-term safety requirements as KBS-3V. The safety studies conducted as part of this programme include a safety assessment of a preliminary design of a KBS-3H repository for spent nuclear fuel located about 400 m underground at the Olkiluoto site, which is the proposed site for a spent fuel repository in Finland. This safety assessment is summarised in the present report. The scientific basis of the safety assessment includes around 30 years of scientific R and D and technical development in the Swedish and Finnish KBS-3V programmes. Much of this scientific basis is directly applicable to KBS-3H. This has allowed the KBS-3H safety studies to focus on those issues that are unique to this design alternative, identified in a systematic difference analysis of KBS-3H and KBS-3V. This difference analysis has shown that the key differences in the evolution and performance of KBS-3H and KBS-3V relate mainly to the engineered barrier system and to the impact of local variations in the rate of groundwater inflow on buffer saturation along the KBS-3H deposition drifts. No features or processes specific to KBS-3H have been identified that could lead to a loss or substantial degradation of the safety functions of the engineered barriers over a million year time frame. Radionuclide release from the repository near field in the event of

NRC inspection alternatives. A study report

International Nuclear Information System (INIS)

Conver, S.K.; Legasey, E.E.; LeDoux, J.C.; Rehfuss, C.

1977-04-01

IE's efforts in pursuing various resident inspection concepts are consistent with the stated interests of the new Administration in improving federal oversight of the nuclear industry. Four alternative resident inspection concepts are described and evaluated vis-a-vis the current program. The concept of full-time onsite inspectors as a preferred alternative is discussed. The tasks necessary to implement this preferred alternative are described

The European Partnership for Alternative Approaches to Animal Testing (EPAA): promoting alternative methods in Europe and beyond.

Science.gov (United States)

Cozigou, Gwenole; Crozier, Jonathan; Hendriksen, Coenraad; Manou, Irene; Ramirez-Hernandez, Tzutzuy; Weissenhorn, Renate

2015-03-01

Here in we introduce the European Partnership for Alternative Approaches to Animal Testing (EPAA) and its activities, which are focused on international cooperation toward alternative methods. The EPAA is one of the leading organizations in Europe for the promotion of alternative approaches to animal testing. Its innovative public-private partnership structure enables a consensus-driven dialogue across 7 industry sectors to facilitate interaction between regulators and regulated stakeholders. Through a brief description of EPAA's activities and organizational structure, we first articulate the value of this collaboration; we then focus on 2 key projects driven by EPAA. The first project aims to address research gaps on stem cells for safety testing, whereas the second project strives for an approach toward demonstration of consistency in vaccine batch release testing. We highlight the growing need for harmonization of international acceptance and implementation of alternative approaches and for increased international collaboration to foster progress on nonanimal alternatives.

Preliminary study on improving safety culture in Malaysian nuclear industries

International Nuclear Information System (INIS)

Ibrahim, Sabariah Kader; Lee, Y. E.

2012-01-01

This paper presents preliminary study on safety culture and its implementation in Malaysian nuclear industries by realizing the importance of safety culture; identification of important safety culture attributes; safety culture assessment and the practices to incorporate the identified safety culture attributes in organization. The first section of this paper explains the terms and definitions related to safety culture. Second, for the realization of importance of safety culture in organization, the international operational experiences emphasizing the importance of safety culture are described. Third, important safety culture attributes which are frequently cited in literature are provided. Fourth, methods to assess safety culture in operating organization are described. Finally, the practices to enhance the safety culture in an organization are discussed

Preliminary study on improving safety culture in Malaysian nuclear industries

Energy Technology Data Exchange (ETDEWEB)

Ibrahim, Sabariah Kader [KAIST, Daejeon (Korea, Republic of); Lee, Y. E. [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2012-10-15

This paper presents preliminary study on safety culture and its implementation in Malaysian nuclear industries by realizing the importance of safety culture; identification of important safety culture attributes; safety culture assessment and the practices to incorporate the identified safety culture attributes in organization. The first section of this paper explains the terms and definitions related to safety culture. Second, for the realization of importance of safety culture in organization, the international operational experiences emphasizing the importance of safety culture are described. Third, important safety culture attributes which are frequently cited in literature are provided. Fourth, methods to assess safety culture in operating organization are described. Finally, the practices to enhance the safety culture in an organization are discussed.

Determination of performance criteria of safety systems in a nuclear power plant via simulated annealing optimization method

International Nuclear Information System (INIS)

Jung, Woo Sik

1993-02-01

This study presents and efficient methodology that derives design alternatives and performance criteria of safety functions/systems in commercial nuclear power plants. Determination of design alternatives and intermediate-level performance criteria is posed as a reliability allocation problem. The reliability allocation is performed for determination of reliabilities of safety functions/systems from top-level performance criteria. The reliability allocation is a very difficult multi objective optimization problem (MOP) as well as a global optimization problem with many local minima. The weighted Chebyshev norm (WCN) approach in combination with an improved Metropolis algorithm of simulated annealing is developed and applied to the reliability allocation problem. The hierarchy of probabilistic safety criteria (PSC) may consist of three levels, which ranges from the overall top level (e.g., core damage frequency, acute fatality and latent cancer fatality) through the interlnediate level (e.g., unavailiability of safety system/function) to the low level (e.g., unavailability of components, component specifications or human error). In order to determine design alternatives of safety functions/systems and the intermediate-level PSC, the reliability allocation is performed from the top-level PSC. The intermediated level corresponds to an objective space and the top level is related to a risk space. The reliability allocation is performed by means of a concept of two-tier noninferior solutions in the objective and risk spaces within the top-level PSC. In this study, two kinds of towtier noninferior solutions are defined: intolerable intermediate-level PSC and desirable design alternatives of safety functions/systems that are determined from Sets 1 and 2, respectively. Set 1 is obtained by maximizing simultaneously not only safety function/system unavailabilities but also risks. Set 1 reflects safety function/system unavailabilities in the worst case. Hence, the

Field study plan for alternate barriers

International Nuclear Information System (INIS)

Freeman, H.D.; Gee, G.W.; Relyea, J.F.

1989-05-01

Pacific Northwest Laboratory (PNL) is providing technical assistance in selecting, designing, evaluating, and demonstrating protective barriers. As part of this technical assistance effort, asphalt, clay, and chemical grout will be evaluated for use as alternate barriers. The purpose of the subsurface layer is to reduce the likelihood that extreme events (i.e., 100-year maximum storms, etc.) will cause significant drainage through the barrier. The tests on alternate barriers will include laboratory and field analysis of the subsurface layer performance. This field test plan outlines the activities required to test and design subsurface moisture barriers. The test plan covers activities completed in FY 1988 and planned through FY 1992 and includes a field-scale test of one or more of the alternate barriers to demonstrate full-scale application techniques and to provide performance data on a larger scale. Tests on asphalt, clay, and chemical grout were initiated in FY 1988 in small (30.5 cm diameter) tube-layer lysimeters. The parameters used for testing the materials were different for each one. The tests had to take into account the differences in material characteristics and response to change in conditions, as well as information provided by previous studies. 33 refs., 8 figs., 1 tab

Review of studies on criticality safety evaluation and criticality experiment methods

International Nuclear Information System (INIS)

Naito, Yoshitaka; Yamamoto, Toshihiro; Misawa, Tsuyoshi; Yamane, Yuichi

2013-01-01

Since the early 1960s, many studies on criticality safety evaluation have been conducted in Japan. Computer code systems were developed initially by employing finite difference methods, and more recently by using Monte Carlo methods. Criticality experiments have also been carried out in many laboratories in Japan as well as overseas. By effectively using these study results, the Japanese Criticality Safety Handbook was published in 1988, almost the intermediate point of the last 50 years. An increased interest has been shown in criticality safety studies, and a Working Party on Nuclear Criticality Safety (WPNCS) was set up by the Nuclear Science Committee of Organisation Economic Co-operation and Development in 1997. WPNCS has several task forces in charge of each of the International Criticality Safety Benchmark Evaluation Program (ICSBEP), Subcritical Measurement, Experimental Needs, Burn-up Credit Studies and Minimum Critical Values. Criticality safety studies in Japan have been carried out in cooperation with WPNCS. This paper describes criticality safety study activities in Japan along with the contents of the Japanese Criticality Safety Handbook and the tasks of WPNCS. (author)

Food safety in an organic perspective

OpenAIRE

Kristensen, Erik Steen; Alrøe, Hugo Fjelsted; Hansen, Birgitte

2002-01-01

The holistic perspective of organic farming implies a broader conception of food safety that includes both product safety and agri-food system safety. The credibility of organic food can only be maintained if the organic agri-food system is developed in correspondence with the basic organic principles. In this way it will be possible to show the whole organic agri-food system as a safer alternative to conventional farming. Thereby trust will be supported in organic foods despite the sparse (a...

On safety management and nuclear safety - A frame of reference for studies of safety management with examples from non-nuclear contects of relevance for nuclear safety

International Nuclear Information System (INIS)

Svenson, O.; Allwin, P.; Salo, I.

2004-03-01

The report includes three case studies of safety management. The studies are presented as chapters, but are written in a format that makes them easy to read separately. Two of the studies cover regulators (the Swedish Civil Aviation Safety Authority, Luftfartsinspektionen) and the Norwegian Petroleum Directorate) and one a regulated activity/industry (a car manufacturer, Volvo Car). The introduction outlines a living system framework and relates this to concepts used in organizational management. The report concludes with some findings with potential relevance for safety management in the nuclear power domain. In the next phase of the work, the regulated counterparts of the regulators here will be investigated in addition to a fourth case study of a regulated activity/industry. (au)

A study of passive safety conditions for fast reactor core

International Nuclear Information System (INIS)

Shimizu, Akinao

1991-01-01

A study has been made for passive safety conditions of fast reactor cores. Objective of the study is to develop a concept of a core with passive safety as well as a simple safety philosophy. A simple safety philosophy, which is wore easy to explain to the public, is needed to enhance the public acceptance for nuclear reactors. The present paper describes a conceptual plan of the study including the definition of the problem a method of approach and identification of tasks to be solved

Study of industry safety management

International Nuclear Information System (INIS)

Park, Pil Su

1987-06-01

This book deals with general remarks, industrial accidents, statistics of industrial accidents, unsafe actions, making machinery and facilities safe, safe activities, having working environment safe, survey of industrial accidents and analysis of causes, system of safety management and operations, safety management planning, safety education, human engineering such as human-machines system, system safety, and costs of disaster losses. It lastly adds individual protective equipment and working clothes including protect equipment for eyes, face, hands, arms and feet.

Safety Culture Enhancement Project. Final Report. A Field Study on Approaches to Enhancement of Safety Culture

Energy Technology Data Exchange (ETDEWEB)

Lowe, Andrew; Hayward, Brent (Dedale Asia Pacific, Albert Park VIC 3206 (Australia))

2006-08-15

This report documents a study with the objective of enhancing safety culture in the Swedish nuclear power industry. A primary objective of this study was to ensure that the latest thinking on human factors principles was being recognised and applied by nuclear power operators as a means of ensuring optimal safety performance. The initial phase of the project was conducted as a pilot study, involving the senior management group at one Swedish nuclear power-producing site. The pilot study enabled the project methodology to be validated after which it was repeated at other Swedish nuclear power industry sites, providing a broad-ranging analysis of opportunities across the industry to enhance safety culture. The introduction to this report contains an overview of safety culture, explains the background to the project and sets out the project rationale and objectives. The methodology used for understanding and analysing the important safety culture issues at each nuclear power site is then described. This section begins with a summary of the processes used in the information gathering and data analysis stage. The six components of the Management Workshops conducted at each site are then described. These workshops used a series of presentations, interactive events and group exercises to: (a) provide feedback to site managers on the safety culture and safety leadership issues identified at their site, and (b) stimulate further safety thinking and provide 'take-away' information and leadership strategies that could be applied to promote safety culture improvements. Section 3, project Findings, contains the main observations and output from the project. These include: - a brief overview of aspects of the local industry operating context that impinge on safety culture; - a summary of strengths or positive attributes observed within the safety culture of the Swedish nuclear industry; - a set of identified opportunities for further improvement; - the aggregated

The use of alternative therapies in the Saskatchewan stroke rehabilitation population

Directory of Open Access Journals (Sweden)

Jefromova Ludmilla

2002-07-01

Full Text Available Abstract Background Many patients use alternative therapies. The purpose of this study was to determine the percentage of stroke rehabilitation patients in Saskatchewan using alternative therapies, whether patients found these therapies effective in alleviating stroke-related symptoms, how often those patients who used alternative therapies discuss this fact with their primary care doctor and the main reason why patients might not do so. Methods Telephone questionnaire surveys were conducted with 117 patients who had suffered a stroke and undergone inpatient or outpatient rehabilitation at Saskatoon City Hospital. Results The study revealed that 26.5% of 117 stroke rehabilitation patients visited alternative practitioners at least once or used some form of unconventional therapy. Only 16.1% of patients found that alternative therapy made them feel much better. Of those who used alternative therapy, 61.3% did not discuss this fact with their primary physician. Many of the respondents (47.3% who did not inform their physician stated that they did not see the necessity of talking about these treatments and 21.1% did not discuss the issue with their physician because they felt that he or she might disapprove of alternative therapies. Conclusion A relatively small percentage of stroke patients found alternative therapies beneficial. Doctors should be aware that a significant number of patients will try alternative treatment without discussion with their primary care physician or specialist. The current study suggests that after completing routine questioning, doctors should also ask their patients about their use of alternative therapies and, when appropriate, review issues of safety and efficacy.

Injection safety practices among nursing staff of mission hospitals in ...

African Journals Online (AJOL)

Vincent E. Omorogbe, Vivian O. Omuemu, Alphonsus R. Isara ... practice of injection safety by nurses in mission hospitals in Benin City, Nigeria. Materials and Methods: A descriptive cross-sectional study was carried out. .... alternatives, reuse of injection equipment, self ... health facilities in rendering healthcare services.

Probabilistic studies for a safety assurance program

International Nuclear Information System (INIS)

Iyer, S.S.; Davis, J.F.

1985-01-01

The adequate supply of energy is always a matter of concern for any country. Nuclear power has played, and will continue to play an important role in supplying this energy. However, safety in nuclear power production is a fundamental prerequisite in fulfilling this role. This paper outlines a program to ensure safe operation of a nuclear power plant utilizing the Probabilistic Safety Studies

Activities on safety culture study. Study status in public and private sectors

International Nuclear Information System (INIS)

Makino, Maomi; Takano, Kenichi

2004-01-01

Around after entering in the 21st century, organizational accidents had occurred in Japan at various industries including nuclear industry, which were caused directly by unsafe action, human error and illegal conduct of personnel but there were problems in safety culture of organization such as slow retreat of safety system stimulated by management, schedule control and procedure management becoming a dead letter, lack of safety education, and workplace climate of schedule priority. This article referred to organizational factors common to many severe accidents and introduced safety culture study in public and private sectors to overcome those factors. Safety Culture Evaluation Support Tool (SCEST) was developed for self-evaluation of safety culture of organization as well as Organizational Reliability model (OR model) for analysis of initiation and propagation process of risk event. Safety diagnosis system and feedback type risk assessment system for promoting safe organizational climate and culture were also developed. (T. Tanaka)

FY 1974 report on the results of the Sunshine Project. Study on a system to refine/transport/store hydrogen and the safety technology; 1974 nendo suiso no seisei yuso chozo system oyobi hoan gijjutsu ni kansuru kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1975-05-31

This study aims at the following. As to an alternative plan of the hydrogen distribution system, this paper makes the comprehensive evaluation from viewpoints of possibility, adaptability to society, economical efficiency, reliability, dynamic characteristics, etc., selects the most rational system and picked up the problems for realization of the system. It also sets up standards for safety technology relating to the hydrogen energy system and acquires the basic knowledge/information on concrete disaster prevention technology which backs up the standards. Among those, in this fiscal year, as system analysis of the hydrogen distribution system, study was made on system analysis of the system alternative plan and problems on system realization. Next, as an investigational study on safety technology in hydrogen energy system, the paper conducted the survey/collection in Japan and abroad of the present law, standards for handling, and examples of disaster/accident in relation to hydrogen, and the survey research on the concrete safety problem predicted. The paper studied the technology related to the safety problem required for safety (survey of effects of impurities, measuring technology, technology to prevent leakage accidents, etc. ). (NEDO)

Alternative transportation fuels: Financing issues

International Nuclear Information System (INIS)

Squadron, W.F.; Ward, C.O.; Brown, M.H.

1992-06-01

A multitude of alternative fuels could reduce air pollution and the impact of oil price shocks. Only a few of these fuels are readily available and inexpensive enough to merit serious consideration over the coming five years. In New York City, safety regulations narrow the field still further by eliminating propane. As a result, this study focuses on the three alternative fuels readily available in New York City: compressed natural gas, methanol, and electricity. Each has significant environmental benefits and each has different cost characteristics. With the Clean Air Act and the National Energy Strategy highlighting the country's need to improve urban air quality and move away from dependence on imported fuels, fleets may soon have little choice but to convert to altemative fuels. Given the potential for large infrastructure and vehicle costs, these fleets may have difficulty finding the capital to make that conversion. Ultimately, then, it will be the involvement of the private sector that will determine the success of alternative fuels. Whether it be utilities, fuel distributors or suppliers, private financing partners or others, it is critical that altemative fuels programs be structured and planned to attract their involvement. This report examines financing methods that do not involve government subsidies. It also explores financing methods that are specific to alternative fuels. Bond issues and other mechanisms that are used for conventional vehicles are not touched upon in this report. This report explores ways to spread the high cost of alternative fuels among a number of parties within the private sector. The emphasis is on structuring partnerships that suit methanol, electric, or natural gas vehicle fleets. Through these partnerships, alternative fuels may ultimately compete effectively against conventional vehicle fuels

Complementary and alternative medicine usage and its determinant factors among Iranian infertile couples.

Science.gov (United States)

Dehghan, Mahlagha; Mokhtarabadi, Sima; Heidari, Fatemeh Ghaedi

2018-04-04

Background The aim of this study was to determine the status of utilizing some complementary and alternative medicine techniques in infertile couples. Methods This was a cross-sectional study conducted on 250 infertile couples referred to a hospital in Kerman using convenience sampling. A researcher-made questionnaire was used to study the prevalence and user satisfaction of complementary and alternative medicines. Results Results indicated that 49.6% of the infertile couples used at least one of the complementary and alternative medicines during the past year. Most individuals used spiritual techniques (71.8% used praying and 70.2% used Nazr) and medicinal plants (54.8%). Safety is the most important factor affecting the satisfaction of infertile couples with complementary treatments (couples think that such treatments are safe (54.8%)). Discussion Concerning high prevalence of complementary and alternative treatments in infertile couples, incorporating such treatments into the healthcare education and promoting the awareness of infertile individuals seem crucial.

FMDP reactor alternative summary report. Volume 1 - existing LWR alternative

International Nuclear Information System (INIS)

Greene, S.R.; Bevard, B.B.

1996-01-01

Significant quantities of weapons-usable fissile materials [primarily plutonium and highly enriched uranium (HEU)] are becoming surplus to national defense needs in both the United States and Russia. These stocks of fissile materials pose significant dangers to national and international security. The dangers exist not only in the potential proliferation of nuclear weapons but also in the potential for environmental, safety, and health (ES ampersand H) consequences if surplus fissile materials are not properly managed. This document summarizes the results of analysis concerned with existing light water reactor plutonium disposition alternatives

FMDP reactor alternative summary report. Volume 1 - existing LWR alternative

Energy Technology Data Exchange (ETDEWEB)

Greene, S.R.; Bevard, B.B. [and others

1996-10-07

Significant quantities of weapons-usable fissile materials [primarily plutonium and highly enriched uranium (HEU)] are becoming surplus to national defense needs in both the United States and Russia. These stocks of fissile materials pose significant dangers to national and international security. The dangers exist not only in the potential proliferation of nuclear weapons but also in the potential for environmental, safety, and health (ES&H) consequences if surplus fissile materials are not properly managed. This document summarizes the results of analysis concerned with existing light water reactor plutonium disposition alternatives.

High-heat tank safety issue resolution program plan. Revision 2

International Nuclear Information System (INIS)

Wang, O.S.

1994-12-01

The purpose of this program plan is to provide a guide for selecting corrective actions that will mitigate and/or remediate the high-heat waste tank safety issue for single-shell tank 241-C-106. The heat source of approximately 110,000 Btu/hr is the radioactive decay of the stored waste material (primarily 90 Sr) inadvertently transferred into the tank in the later 1960s. Currently, forced ventilation, with added water to promote thermal conductivity and evaporation cooling, is used for heat removal. The method is very effective and economical. At this time, the only viable solution identified to permanently resolve this safety issue is the removal of heat-generating waste in the tank. This solution is being aggressively pursued as the only remediation method to this safety issue, and tank 241-C-106 has been selected as the first single-shell tank for retrieval. The current cooling method and other alternatives are addressed in this program as means to mitigate this safety issue before retrieval. This program plan has three parts. The first part establishes program objectives and defines safety issue, drivers, and resolution criteria and strategy. The second part evaluates the high-heat safety issue and its mitigation and remediation methods and other alternatives according to resolution logic. The third part identifies major tasks and alternatives for mitigation and resolution of the safety issue. A table of best-estimate schedules for the key tasks is also included in this program plan

Complementary and Alternative Medicine: A Cross-Sectional Observational Study in Pediatric Inpatients.

Science.gov (United States)

Dhankar, Mukesh

2018-01-01

The aim was to study the prevalence of complementary and alternative medicine use in acutely sick hospitalized children and factors associated with it. This is a cross-sectional, hospital-based study in a tertiary care center of Delhi, India. Children admitted to a pediatric unit during the study period were assessed using a specially designed questionnaire. Out of the total 887 admitted children, 161 (18.1%) were using complementary and alternate medicine in one form or another. Of these, 113 (70.2%) were using complementary and alternate medicine for the current illness directly leading to admission and the remaining 48 (29.8%) had used complementary and alternate medicine in past. The common complementary and alternate medicine use observed in our study was combined ayurveda and spiritual approach (25.5%), ayurveda (24.8%), spiritual (21.7%), homeopathic (13%), and 47.2% of children were using spiritual approach in form of Jhada (tying piece of cloth on arm or leg or keeping a knife by the side of child). The significant factors associated with complementary and alternate medicine use were younger age, female gender, and father being employed. Complementary and alternate medicine is commonly used even in acutely sick children.

Efficacy and safety of fractional carbon dioxide laser for treatment of unwanted facial freckles in phototypes II-IV: a pilot study.

Science.gov (United States)

El Zawahry, Bakr; Zaki, Naglaa; Hafez, Vanessa; Abdel Hay, Rania; Hay, Rania Abdel; Fahim, Aya

2014-11-01

Facial freckles are a cosmetic concern to Egyptians, particularly young females. Several therapeutic lines exist with variable response rates and limitations. Fractional carbon dioxide (FCO2) laser provides minimal ablation and therefore less down time and less side effects. The efficacy and safety of this laser technology have still not been studied in freckles. The aim of this study is to assess the efficacy and safety of FCO2 laser in the treatment of unwanted facial freckles in Egyptians. Twenty patients undergone a single session of FCO2 laser and then were followed up clinically a month later. Photographs were taken before treatment and at follow-up visit and were assessed by three blinded investigators. Percent of global improvement was measured on a 4-point grading scale. Patient's satisfaction and adverse events were recorded. Two patients (10 %) showed grade 1 improvement, while eight patients (40 %) showed grade 2 improvement. Nine patients (45 %) showed grade 3 improvement, and only one patient (5 %) showed grade 4 improvement. FCO2 laser resurfacing is effective and safe in treatment of facial freckles in skin phototypes II-IV. It can offer a more practical alternative to topical treatments, and a cheaper alternative to Q-switched lasers.

Safety Culture Enhancement Project. Final Report. A Field Study on Approaches to Enhancement of Safety Culture

International Nuclear Information System (INIS)

Lowe, Andrew; Hayward, Brent

2006-08-01

This report documents a study with the objective of enhancing safety culture in the Swedish nuclear power industry. A primary objective of this study was to ensure that the latest thinking on human factors principles was being recognised and applied by nuclear power operators as a means of ensuring optimal safety performance. The initial phase of the project was conducted as a pilot study, involving the senior management group at one Swedish nuclear power-producing site. The pilot study enabled the project methodology to be validated after which it was repeated at other Swedish nuclear power industry sites, providing a broad-ranging analysis of opportunities across the industry to enhance safety culture. The introduction to this report contains an overview of safety culture, explains the background to the project and sets out the project rationale and objectives. The methodology used for understanding and analysing the important safety culture issues at each nuclear power site is then described. This section begins with a summary of the processes used in the information gathering and data analysis stage. The six components of the Management Workshops conducted at each site are then described. These workshops used a series of presentations, interactive events and group exercises to: (a) provide feedback to site managers on the safety culture and safety leadership issues identified at their site, and (b) stimulate further safety thinking and provide 'take-away' information and leadership strategies that could be applied to promote safety culture improvements. Section 3, project Findings, contains the main observations and output from the project. These include: - a brief overview of aspects of the local industry operating context that impinge on safety culture; - a summary of strengths or positive attributes observed within the safety culture of the Swedish nuclear industry; - a set of identified opportunities for further improvement; - the aggregated results of the

[Alternative approaches in thyroid surgery].

Science.gov (United States)

Maurer, E; Wächter, S; Bartsch, D K

2017-08-01

In thyroid surgery multiple different cervical minimally invasive (partly endoscopically assisted) and extracervical endoscopic (partly robot-assisted) approaches have been developed in the last 20 years. The aim of all these alternative approaches to the thyroid gland is optimization of the cosmetic result. The indications for the use of alternative and conventional approaches are principally the same. Important requirements for the use of alternative methods are nevertheless a broad experience in conventional thyroid operations of the thyroid and adequate patient selection under consideration of the size of the thyroid and the underlying pathology. Contraindications for the use of alternative approaches are a large size of the thyroid gland including local symptoms, advanced carcinomas, reoperations and previous radiations of the anterior neck. The current article gives an overview of the clinically implemented alternative approaches for thyroid surgery. Of those the majority must still be considered as experimental. The alternative approaches to the thyroid gland can be divided in cervical minimally invasive, extracervical endosopic (robot-assisted) and transoral operations (natural orifice transluminal endoscopic surgery, NOTES). Since conventional thyroid operations are standardized procedures with low complication rates, alternative approaches to the thyroid gland are considered critically in Germany. The request for a perfect cosmetic result should not overweigh patients' safety. Only a few alternative approaches (e. g. MIVAT, RAT) can yet be considered as a safe addition in experienced hands in highly selected patients.

Nuclear Safety. 1997; Surete Nucleaire. 1997

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-01-19

A quick review of the nuclear safety at EDF may be summarized as follows: - the nuclear safety at EDF maintains at a rather good standard; - none of the incidents that took place has had any direct impact upon safety; - the availability remained good; - initiation of the floor 4 reactor generation (N4 unit - 1450 MW) ensued without major difficulties (the Civaux 1 NPP has been coupled to the power network at 24 december 1997); - the analysis of the incidents interesting from the safety point of view presents many similarities with earlier ones. Significant progress has been recorded in promoting actively and directly a safe operation by making visible, evident and concrete the exertion of the nuclear operation responsibility and its control by the hierarchy. The report develops the following chapters and subjects: 1. An overview on 1997; 1.1. The technical issues of the nuclear sector; 1.2. General performances in safety; 1.3. The main incidents; 1.4. Wastes and radiation protection; 2. Nuclear safety management; 2.1. Dynamics and results; 2.2. Ameliorations to be consolidated; 3. Other important issues in safety; 3.1. Probabilistic safety studies; 3.2. Approach for safety re-evaluation; 3.3. The network safety; 3.4. Crisis management; 3.5. The Lifetime program; 3.6. PWR; 3.7. Documentation; 3.8. Competence; 4. Safety management in the future; 4.1. An open future; 4.2. The fast neutron NPP at Creys-Malville; 4.3. Stabilization of the PWR reference frame; 4.4. Implementing the EURATOM directive regarding the radiation protection standards; 4.5. Development of biomedical research and epidemiological studies; 4.6. New regulations concerning the liquid and gaseous effluents; 5. Visions of an open future; 5.1. Alternative views upon safety ay EDF; 5.2. Safety authority; 5.3. International considerations; 5.4. What happens abroad; 5.5. References from non-nuclear domain. Four appendices are added referring to policy of safety management, policy of human factors in NPPs

Preliminary report on safety aspects on nuclear power generation in Sri Lanka

International Nuclear Information System (INIS)

Jayamanne, D.; Fernando, W.L.W.; Ariyadasa

1988-01-01

This document is intended as background information on nuclear energy to contribute to Sri Lanka's comparative study of alternative sources of energy. This study has considered the safety and environmental effects of nuclear power reactors. Basic concepts of nuclear physics are introduced and providing and appreciation of safety considerations and safety aspects of nuclear power plants and the personnel. Radioactive waste management, storage and disposal are also discussed. Natural radiation levels in Sri Lanka are provided as well as information on biological effects of radiation especially occupational exposure licensing procedures for nuclear power plants are outlined strategy for public awareness of nuclear power is proposed

Nanotechnology Safety Self-Study

Energy Technology Data Exchange (ETDEWEB)

Grogin, Phillip W. [Los Alamos National Laboratory

2016-03-29

Nanoparticles are near-atomic scale structures between 1 and 100 nanometers (one billionth of a meter). Engineered nanoparticles are intentionally created and are used in research and development at Sandia National Laboratories (SNL) and Los Alamos National Laboratory (LANL). This course, Nanotechnology Safety Self-Study, presents an overview of the hazards, controls, and uncertainties associated with the use of unbound engineered nanoscale particles (UNP) in a laboratory environment.

Cross-validation of an employee safety climate model in Malaysia.

Science.gov (United States)

Bahari, Siti Fatimah; Clarke, Sharon

2013-06-01

Whilst substantial research has investigated the nature of safety climate, and its importance as a leading indicator of organisational safety, much of this research has been conducted with Western industrial samples. The current study focuses on the cross-validation of a safety climate model in the non-Western industrial context of Malaysian manufacturing. The first-order factorial validity of Cheyne et al.'s (1998) [Cheyne, A., Cox, S., Oliver, A., Tomas, J.M., 1998. Modelling safety climate in the prediction of levels of safety activity. Work and Stress, 12(3), 255-271] model was tested, using confirmatory factor analysis, in a Malaysian sample. Results showed that the model fit indices were below accepted levels, indicating that the original Cheyne et al. (1998) safety climate model was not supported. An alternative three-factor model was developed using exploratory factor analysis. Although these findings are not consistent with previously reported cross-validation studies, we argue that previous studies have focused on validation across Western samples, and that the current study demonstrates the need to take account of cultural factors in the development of safety climate models intended for use in non-Western contexts. The results have important implications for the transferability of existing safety climate models across cultures (for example, in global organisations) and highlight the need for future research to examine cross-cultural issues in relation to safety climate. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

78 FR 64504 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2013-10-29

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH or..., Number 177, Pages 56235-56236. Contact Person for More Information: Price Connor, Ph.D., NIOSH Health...

Canadian Consumer Food Safety Practices and Knowledge: Foodbook Study.

Science.gov (United States)

Murray, Regan; Glass-Kaastra, Shiona; Gardhouse, Christine; Marshall, Barbara; Ciampa, Nadia; Franklin, Kristyn; Hurst, Matt; Thomas, M Kate; Nesbitt, Andrea

2017-10-01

Understanding consumers' food safety practices and knowledge supports food safety education for the prevention of foodborne illness. The objective of this study was to describe Canadian consumer food safety practices and knowledge. This study identifies demographic groups for targeted food safety education messaging and establishes a baseline measurement to assess the effectiveness of food safety interventions over time. Questions regarding consumer food safety practices and knowledge were included in a population-based telephone survey, Foodbook, conducted from November 2014 to March 2015. The results were analyzed nationally by age group and by gender. The results showed that approximately 90% of Canadians reported taking the recommended cleaning and separating precautions when handling raw meat to prevent foodborne illness. Only 29% of respondents reported using a food thermometer when cooking any meat, and even fewer (12%) reported using a food thermometer for small cuts of meat such as chicken pieces. The majority (>80%) of Canadians were aware of the foodborne illness risks related to chicken and hamburger, but fewer (poultry.

An evaluation on the disposal alternatives for low- and intermediate- level radwaste (II)

International Nuclear Information System (INIS)

Park, Hun Hwee; Han, Kyung Won; Hahn, Pil Soo; Lee, Han Soo; Cho, Won Jin; Lee, Jae Dwan; Park, Chung Kyun; Lee, Myung Joo; Choi, Heui Joo; Lee, Youn Myoung

1988-02-01

An evaluation on the radioactive waste disposal alternatives for the low-and intermediate level wastes being produced from nuclear power generation and radioisotope application was carried out in view of the radiological safety, socio-political aspects and repository construction economics. Three types of possible alternatives-sample shallow land disposal method, engineered shallow land disposal method and engineered rock cavern disposal method are investigated. The safety assessment consists of radiological dose calculation and nonradiological impacts which is expressed as total number of injuries and fatalities during construction, operation and transportation. The sociopolitical assessment is done in terms of site conditions including easiness for land acquisition, technical feasibility and public acceptance. The economic assessment is performed by cost comparison regarding land acquisition, construction, operation and closure for each alternatives. The evaluation shows that engineered rock cavern disposal method has remarkable favour in safety than others. And also an integrated evaluation using AHP results the engineered rock cavern disposal method as the most favorable option

Flammable Gas Safety Self-Study 52827

Energy Technology Data Exchange (ETDEWEB)

Glass, George [Los Alamos National Laboratory

2016-03-17

This course, Flammable Gas Safety Self-Study (COURSE 52827), presents an overview of the hazards and controls associated with commonly used, compressed flammable gases at Los Alamos National Laboratory (LANL).

Occupational exposures to emissions from combustion of diesel and alternative fuels in underground mining--a simulated pilot study.

Science.gov (United States)

Lutz, Eric A; Reed, Rustin J; Lee, Vivien S T; Burgess, Jefferey L

2015-01-01

Diesel fuel is commonly used for underground mining equipment, yet diesel engine exhaust is a known human carcinogen. Alternative fuels, including biodiesel, and a natural gas/diesel blend, offer the potential to reduce engine emissions and associated health effects. For this pilot study, exposure monitoring was performed in an underground mine during operation of a load-haul-dump vehicle. Use of low-sulfur diesel, 75% biodiesel/25% diesel blend (B75), and natural gas/diesel blend (GD) fuels were compared. Personal samples were collected for total and respirable diesel particulate matter (tDPM and rDPM, respectively) and total and respirable elemental and organic carbon (tEC, rEC, tOC, rOC, respectively), as well as carbon monoxide (CO), formaldehyde, acetaldehyde, naphthalene, nitric oxide (NO), and nitrogen dioxide (NO2). Compared to diesel, B75 use was associated with a 33% reduction in rDPM, reductions in rEC, tEC, and naphthalene, increased tDPM, tOC, and NO, and no change in rOC, CO, and NO2. Compared to diesel, GD was associated with a 66% reduction in rDPM and a reduction in all other exposures except CO. The alternative fuels tested both resulted in reduced rDPM, which is the basis for the current Mine Safety and Health Administration (MSHA) occupational exposure standard. Although additional study is needed with a wider variety of equipment, use of alternative fuels have the promise of reducing exposures from vehicular exhaust in underground mining settings.

Fifth annual report to congress. Federal alternative motor fuels programs

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-09-01

This report presents the status of the US Department of Energy`s alternative fuel vehicle demonstration and performance tracking programs being conducted in accordance with the Energy Policy and Conservation Act. These programs comprise the most comprehensive data collection effort ever undertaken on alternative transportation fuels and alternative fuel vehicles. The report summarizes tests and results from the fifth year. Electric vehicles are not included in these programs, and the annual report does not include information on them. Since the inception of the programs, great strides have been made in developing commercially viable alternative fuel vehicle technologies. However, as is the case in the commercialization of all new technologies, some performance problems have been experienced on vehicles involved in early demonstration efforts. Substantial improvements have been recorded in vehicle practicality, safety, and performance in real-world demonstrations. An aspect of particular interest is emissions output. Results from light duty alternative fuel vehicles have demonstrated superior inservice emissions performance. Heavy duty alternative fuel vehicles have demonstrated dramatic reductions in particulate emissions. However, emissions results from vehicles converted to run on alternative fuel have not been as promising. Although the technologies available today are commercially viable in some markets, further improvements in infrastructure and economics will result in greater market expansion. Information is included in this report on light and heavy duty vehicles, transit buses, vehicle conversions, safety, infrastructure support, vehicle availability, and information dissemination.

Modeling the Relationship between Safety Climate and Safety Performance in a Developing Construction Industry: A Cross-Cultural Validation Study.

Science.gov (United States)

Zahoor, Hafiz; Chan, Albert P C; Utama, Wahyudi P; Gao, Ran; Zafar, Irfan

2017-03-28

This study attempts to validate a safety performance (SP) measurement model in the cross-cultural setting of a developing country. In addition, it highlights the variations in investigating the relationship between safety climate (SC) factors and SP indicators. The data were collected from forty under-construction multi-storey building projects in Pakistan. Based on the results of exploratory factor analysis, a SP measurement model was hypothesized. It was tested and validated by conducting confirmatory factor analysis on calibration and validation sub-samples respectively. The study confirmed the significant positive impact of SC on safety compliance and safety participation , and negative impact on number of self-reported accidents/injuries . However, number of near-misses could not be retained in the final SP model because it attained a lower standardized path coefficient value. Moreover, instead of safety participation , safety compliance established a stronger impact on SP. The study uncovered safety enforcement and promotion as a novel SC factor, whereas safety rules and work practices was identified as the most neglected factor. The study contributed to the body of knowledge by unveiling the deviations in existing dimensions of SC and SP. The refined model is expected to concisely measure the SP in the Pakistani construction industry, however, caution must be exercised while generalizing the study results to other developing countries.

The procedure of alternative site selection within the report of the study group on the radioactive waste final repository selection process (AKEnd); Das Verfahren der alternativen Standortsuche im Bericht des Arbeitskreises Auswahlverfahren Endlagerstandorte (AKEnd)

Energy Technology Data Exchange (ETDEWEB)

Brenner, M. [Jena Univ. (Germany)

2005-07-01

The paper discusses the results of the report of the study group on the radioactive waste final repository selection process with respect to the alternative site selection procedure. Key points of the report are the long-term safety, the alternativity of sites and the concept of one repository. The critique on this report is focussed on the topics site selection and licensing procedures, civil participation, the factor time and the question of cost.

FMDP reactor alternative summary report: Volume 4, Evolutionary LWR alternative

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-09-01

Significant quantities of weapons-usable fissile materials [primarily plutonium and highly enriched uranium (HEU)] have become surplus to national defense needs both in the United States and Russia. These stocks of fissile materials pose significant dangers to national and international security. The dangers exist not only in the potential proliferation of nuclear weapons but also in the potential for environmental, safety, and health (ES&H) consequences if surplus fissile materials are not properly managed. The purpose of this report is to provide schedule, cost, and technical information that will be used to support the Record of Process (ROD). Following the screening process, DOE/MD via its national laboratories initiated a more detailed analysis activity to further evaluate each of the ten plutonium disposition alternatives that survived the screening process. Three ``Alternative Teams,`` chartered by DOE and comprised of technical experts from across the DOE national laboratory complex, conducted these analyses. One team was chartered for each of the major disposition classes (borehole, immobilization, and reactors). During the last year and a half, the Fissile Materials Disposition Program (FMDP) Reactor Alternative Team (RxAT) has conducted extensive analyses of the cost, schedule, technical maturity, S&S, and other characteristics of reactor-based plutonium disposition. The results of the RxAT`s analyses of the existing LWR, CANDU, and partially complete LWR alternatives are documented in Volumes 1-3 of this report. This document (Volume 4) summarizes the results of these analyses for the ELWR-based plutonium disposition option.

49 CFR 659.29 - Oversight agency safety and security reviews.

Science.gov (United States)

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Oversight agency safety and security reviews. 659... Role of the State Oversight Agency § 659.29 Oversight agency safety and security reviews. At least... safety program plan and system security plan. Alternatively, the on-site review may be conducted in an on...

The study, design and simulation of a free piston Stirling engine linear alternatorThe study, design and simulation of a free piston Stirling engine linear alternator

Directory of Open Access Journals (Sweden)

Teodora Susana Oros

2014-12-01

Full Text Available This paper presents a study, design and simulation of a Free Piston Stirling Engine Linear Alternator. There are presented the main steps of the magnetic and electric calculations for a permanent magnet linear alternator of fixed coil and moving magnets type. Finally, a detailed thermal, mechanical and electrical model for a Stirling engine linear alternator have been made in SIMULINK simulation program. The linear alternator simulation model uses a controllable DC voltage which simulates the linear alternator combined with a rectifier, a variable load and a DC-DC converter, which compensates for the variable nature of Stirling engine operation, and ensures a constant voltage output regardless of the load.

Complementary and alternative exercise for fibromyalgia: a meta-analysis

Directory of Open Access Journals (Sweden)

Mist SD

2013-03-01

Full Text Available Scott David Mist, Kari Firestone, Kim Dupree Jones Fibromyalgia Research and Treatment Group, School of Nursing, Oregon Health and Science University, Portland, OR, USA Abstract: Complementary and alternative medicine includes a number of exercise modalities, such as tai chi, qigong, yoga, and a variety of lesser-known movement therapies. A meta-analysis of the current literature was conducted estimating the effect size of the different modalities, study quality and bias, and adverse events. The level of research has been moderately weak to date, but most studies report a medium-to-high effect size in pain reduction. Given the lack of adverse events, there is little risk in recommending these modalities as a critical component in a multimodal treatment plan, which is often required for fibromyalgia management. Keywords: fibromyalgia, exercise, complementary and alternative, efficacy, safety

Case study: the Argentina Road Safety Project: lessons learned for the decade of action for road safety, 2011-2020.

Science.gov (United States)

Raffo, Veronica; Bliss, Tony; Shotten, Marc; Sleet, David; Blanchard, Claire

2013-12-01

This case study of the Argentina Road Safety Project demonstrates how the application of World Bank road safety project guidelines focused on institution building can accelerate knowledge transfer, scale up investment and improve the focus on results. The case study highlights road safety as a development priority and outlines World Bank initiatives addressing the implementation of the World Report on Road Traffic Injury's recommendations and the subsequent launch of the Decade of Action for Road Safety, from 2011-2020. The case study emphasizes the vital role played by the lead agency in ensuring sustainable road safety improvements and promoting the shift to a 'Safe System' approach, which necessitated the strengthening of all elements of the road safety management system. It summarizes road safety performance and institutional initiatives in Argentina leading up to the preparation and implementation of the project. We describe the project's development objectives, financing arrangements, specific components and investment staging. Finally, we discuss its innovative features and lessons learned, and present a set of supplementary guidelines, both to assist multilateral development banks and their clients with future road safety initiatives, and to encourage better linkages between the health and transportation sectors supporting them.

Safety analysis and related studies

International Nuclear Information System (INIS)

Lelievre, J.

1979-12-01

Several examples of reactor safety studies are given. For light water reactors, the consequences of loss of coolant, the disposition of the fuel elements and the behaviour under irradiation of the steels used for containment are described. For fast reactors, the disposition of fuel elements in the case of cooling accidents and sodium fies are described. Examples given of studies not specific to a particular reactor type include studies of non-destructive testing and those of reliability

Alternative propulsion for automobiles

CERN Document Server

Stan, Cornel

2017-01-01

The book presents – based on the most recent research and development results worldwide - the perspectives of new propulsion concepts such as electric cars with batteries and fuel cells, and furthermore plug in hybrids with conventional and alternative fuels. The propulsion concepts are evaluated based on specific power, torque characteristic, acceleration behaviour, specific fuel consumption and pollutant emissions. The alternative fuels are discussed in terms of availability, production, technical complexity of the storage on board, costs, safety and infrastructure. The book presents summarized data about vehicles with electric and hybrid propulsion. The propulsion of future cars will be marked by diversity – from compact electric city cars and range extender vehicles for suburban and rural areas up to hybrid or plug in SUV´s, Pick up´s and luxury class automobiles.

The advanced neutron source facility: Safety philosophy and studies

International Nuclear Information System (INIS)

Greene, S.R.; Harrington, R.M.

1988-01-01

The Advanced Neutron Source (ANS) is currently the only new civilian nuclear reactor facility proposed for construction in the United States. Even though the thermal power of this research-oriented reactor is a relatively low 300 MW, the design will undoubtedly receive intense scrutiny before construction is allowed to proceed. Safety studies are already under way to ensure that the maximum degree of safety in incorporated into the design and that the design is acceptable to the Department of Energy (DOE) and can meet the Nuclear Regulatory Commission regulations. This document discusses these safety studies

Patient safety: Safety culture and patient safety ethics

DEFF Research Database (Denmark)

Madsen, Marlene Dyrløv

2006-01-01

,demonstrating significant, consistent and sometimes large differences in terms of safety culture factors across the units participating in the survey. Paper 5 is the results of a study of the relation between safety culture, occupational health andpatient safety using a safety culture questionnaire survey......Patient safety - the prevention of medical error and adverse events - and the initiative of developing safety cultures to assure patients from harm have become one of the central concerns in quality improvement in healthcare both nationally andinternationally. This subject raises numerous...... challenging issues of systemic, organisational, cultural and ethical relevance, which this dissertation seeks to address through the application of different disciplinary approaches. The main focus of researchis safety culture; through empirical and theoretical studies to comprehend the phenomenon, address...

Safety assessment for a KBS-3H spent nuclear fuel repository at Olkiluoto. Summary report

International Nuclear Information System (INIS)

Smith, Paul; Neall, Fiona; Snellman, Margit; Pastina, Barbara; Nordman, Henrik; Johnson, Lawrence; Hjerpe, Thomas

2008-03-01

The KBS-3 method, based on multiple barriers, is the proposed spent fuel disposal method both in Sweden and Finland. KBS-3H and KBS-3V are the two design alternatives of the KBS-3 spent fuel disposal method. Posiva and SKB have conducted a joint research, demonstration and development (RDandD) programme in 2002-2007 with the overall aim of establishing whether KBS-3H represents a feasible alternative to the reference alternative KBS-3V. The overall objectives of the present phase covering the period 2004-2007 have been to demonstrate that the horizontal deposition alternative is technically feasible and to demonstrate that it fulfils the same long-term safety requirements as KBS-3V. The safety studies conducted as part of this programme include a safety assessment of a preliminary design of a KBS-3H repository for spent nuclear fuel located about 400 m underground at the Olkiluoto site, which is the proposed site for a spent fuel repository in Finland. This safety assessment is summarised in the present report. The scientific basis of the safety assessment includes around 30 years of scientific RandD and technical development in the Swedish and Finnish KBS-3V programmes. Much of this scientific basis is directly applicable to KBS-3H. This has allowed the KBS-3H safety studies to focus on those issues that are unique to this design alternative, identified in a systematic 'difference analysis' of KBS-3H and KBS-3V. This difference analysis has shown that the key differences in the evolution and performance of KBS-3H and KBS-3V relate mainly to the engineered barrier system and to the impact of local variations in the rate of groundwater inflow on buffer saturation along the KBS-3H deposition drifts. No features or processes specific to KBS-3H have been identified that could lead to a loss or substantial degradation of the safety functions of the engineered barriers over a million year time frame. Radionuclide release from the repository near field in the event of

Safety assessment for a KBS-3H spent nuclear fuel repository at Olkiluoto. Summary report

Energy Technology Data Exchange (ETDEWEB)

Smith, Paul; Neall, Fiona; Snellman, Margit; Pastina, Barbara; Nordman, Henrik; Johnson, Lawrence; Hjerpe, Thomas

2008-03-15

The KBS-3 method, based on multiple barriers, is the proposed spent fuel disposal method both in Sweden and Finland. KBS-3H and KBS-3V are the two design alternatives of the KBS-3 spent fuel disposal method. Posiva and SKB have conducted a joint research, demonstration and development (RDandD) programme in 2002-2007 with the overall aim of establishing whether KBS-3H represents a feasible alternative to the reference alternative KBS-3V. The overall objectives of the present phase covering the period 2004-2007 have been to demonstrate that the horizontal deposition alternative is technically feasible and to demonstrate that it fulfils the same long-term safety requirements as KBS-3V. The safety studies conducted as part of this programme include a safety assessment of a preliminary design of a KBS-3H repository for spent nuclear fuel located about 400 m underground at the Olkiluoto site, which is the proposed site for a spent fuel repository in Finland. This safety assessment is summarised in the present report. The scientific basis of the safety assessment includes around 30 years of scientific RandD and technical development in the Swedish and Finnish KBS-3V programmes. Much of this scientific basis is directly applicable to KBS-3H. This has allowed the KBS-3H safety studies to focus on those issues that are unique to this design alternative, identified in a systematic 'difference analysis' of KBS-3H and KBS-3V. This difference analysis has shown that the key differences in the evolution and performance of KBS-3H and KBS-3V relate mainly to the engineered barrier system and to the impact of local variations in the rate of groundwater inflow on buffer saturation along the KBS-3H deposition drifts. No features or processes specific to KBS-3H have been identified that could lead to a loss or substantial degradation of the safety functions of the engineered barriers over a million year time frame. Radionuclide release from the repository near field in the

Alternative to Nitric Acid Passivation Project Overview

Science.gov (United States)

Lewis, Pattie L.

2013-01-01

The standard practice for protection of stainless steel is a process called passivation. This procedure results in the formation of a metal oxide layer to prevent corrosion. Typical passivation procedures call for the use of nitric acid which exhibits excellent corrosion performance; however, there are a number of environmental, worker safety, and operational issues associated with its use. The longtime military specification for the passivation of stainless steel was cancelled in favor of newer specifications which allow for the use of citric acid in place of nitric acid. Citric acid offers a variety of benefits that include increased safety for personnel, reduced environmental impact, and reduced operational costs. There have been few studies, however, to determine whether citric acid is an acceptable alternative for NASA and DoD. This paper details activities to date including development of the joint test plan, on-going and planned testing, and preliminary results.

Preliminary Study on the Revision of Nuclear Safety Policy Statement

International Nuclear Information System (INIS)

Lee, Y. E.; Lee, S. H.; Chang, H. S.; Choi, K. S.; Jung, S. J.

2011-01-01

Nuclear safety policy in Korea is currently declared in the Nuclear Safety Charter as the highest tier document and safety principles and directions are announced in the Nuclear Safety Policy Statement. As the circumstances affecting on the nuclear safety policy change, it needs to revise the Statement. This study aims to develop the revised Nuclear Safety Policy Statement to declare that securing safety is a prerequisite to the utilization of nuclear energy, and that all workers in nuclear industry and regulatory body must adhere to the principle of priority to safety. As a result, two different types of revision are being prepared as of August. One is based on the spirit of Nuclear Safety Charter as well as the direction of future-oriented safety policies including the changes in the environment after declaration of the Statement. The other is to declare the fundamental safety objective and safety principles as the top philosophy of national nuclear safety policy by adopting the '10 Safety Principles in IAEA Safety Fundamental' instead of the current Charter. Both versions of revision are subject to further in-depth discussion. However once the revision is finalized and declared, it would be useful to accomplish effectively the organizational responsibilities and to enhance the public confidence in nuclear safety by performing the regulatory activities in a planned and systematic manner and promulgating the government's dedication to priority to safety

Progress in the development of methodology for fusion safety systems studies

International Nuclear Information System (INIS)

Ho, S.K.; Cambi, G.; Ciattaglia, S.; Fujii-e, Y.; Seki, Y.

1994-01-01

The development of fusion safety systems-study methodology, including the aspects of schematic classification of overall fusion safety system, qualitative assessment of fusion system for identification of critical accident scenarios, quantitative analysis of accident consequences and risk for safety design evaluation, and system-level analysis of accident consequences and risk for design optimization, by a consortium of international efforts is presented. The potential application of this methodology into reactor design studies will facilitate the systematic assessment of safety performance of reactor designs and enhance the impacts of safety considerations on the selection of design configurations

Gas cooled fast reactor 2400 MWTh, status on the conceptual design studies and preliminary safety analysis

International Nuclear Information System (INIS)

Malo, J.Y.; Alpy, N.; Bentivoglio, F.

2009-01-01

The Gas cooled Fast Reactor (GFR) is considered by the French Commissariat a l'Energie Atomique as a promising concept, combining the benefits of fast spectrum and high temperature, using Helium as coolant. A status on the GFR preliminary viability was made at the end of 2007, ending the pre-conceptual design phase. A consistent overall systems arrangement was proposed and a preliminary safety analysis based on operating transient calculations and a simplified PSA had established a global confidence in the feasibility and safety of this baseline concept. Its potential for attractive performances had been pointed out. Compare to the more mature Sodium Fast Reactor technology, no demonstrator has ever been built and the feasibility demonstration will required a longer lead time. The next main project milestone is related to the GFR viability, scheduled in 2012. The current studies consist in revisiting the reactor reference design options as selected at the end of 2007. Most of them are being consolidated by going more in depth in the analysis. Some possible alternatives are assessed. The paper will give a status on the last studies performed on the core design and corresponding neutronics and cycle performance, the Decay Heat Removal strategy and preliminary safety analysis, systems design and balance of plant... This paper is complementary to the Icapp'09 papers 9062 dealing with the Gas cooled Fast Reactor Demonstrator ALLEGRO and 9378 related to GFR transients analysis. (author)

Project safety studies - nuclear waste management (PSE)

International Nuclear Information System (INIS)

1981-10-01

The project 'Safety Studies-Nuclear Waste Management' (PSE) is a research project performed by order of the Federal Minister for Research and Technology, the general purpose of which is to deepen and ensure the understanding of the safety aspects of the nuclear waste management and to prepare a risk analysis which will have to be established in the future. Owing to this the project is part of a series of projects which serve the further development of the concept of nuclear waste management and its safety, and which are set up in such a way as to accompany the realization of that concept. This report contains the results of the first stage of the project from 1978 to mid-1981. (orig./RW) [de

Report of study group 4.3 ''pipeline integrity management and safety''

Energy Technology Data Exchange (ETDEWEB)

Clavel, P.

2000-07-01

This report highlights the Pipeline integrity Management methods being implemented by gas companies. These aim at maintaining the current high safety level, prevent major hazards, ensure the integrity of the pipeline and protect people and environment in the vicinity of the pipeline in the most cost effective way. It should be noticed that Pipeline Integrity Management aspects, technical and organisational, are included in the more general framework of the Safety Management System. Currently, more and more gas companies implement such a system on the basis of standards like ISO 9000 and so on. In this way, the report shows how practices of Pipeline Integrity Management are continually developing in order to adapt to their environment, and to improve performance. Past experience and imminent developments show that Pipeline Integrity Management is a flexible and efficient approach to improve safety in the long term. Consequently, Pipeline Integrity Management Systems are, under the control of authorities, the best alternative to additional safety regulations. Within the context of deregulation of the European markets and globalization Pipeline Integrity Management appears to be a tool to promote the gas industry in the eyes of the authorities, the market regulators and the customers (industrialists,...). (author)

Critical Evaluation of Animal Alternative Tests for the Identification of Endocrine Active Substances

Science.gov (United States)

A significant amount of research is currently targeted to evaluate alternative test methods that may reduce, refine, or replace the use of animals, while ensuring human and environmental health and safety. It is important that the information gained from the alternative tests pr...

A study on optimization of the nuclear safety system

International Nuclear Information System (INIS)

Lee, Sang Hoon; Koh, Byung Joon; Kim, Jin Soo; Kim, Byoung Do; Cho, Seong Won; Kwon, Seog Kwon; Choi, Kwang Sik

1986-12-01

The number of nuclear facilities (nuclear power plants, research reactors, nuclear fuel facilities) under construction or in operation in Korea continues to increase and this has brought about increased importance and concerns toward nuclear safety in Korea. Also, domestic nuclear related organizations are increasingly carrying out the design/construction of nuclear power plants and the development /supply of nuclear fuels. In order to flexibly respond to these changes and to suggest direction to take, it is necessary to re-examine the current nuclear safety regulation system. This study is carried out in two stages and this report describes the results of the analysis and the assessment of the nuclear licencing system of such foreign countries as sweden and German, as the first of the two. In this regard, this study includes the analysis on the backgrounds on the choice of nuclear licensing system, the analysis on the licensing procedures, the analysis on the safety inspection system and the enforcement laws, the analysis on the structure and function of the regulatory, business and research organizations as well as the analysis on the relationship between the safety research and the regulatory duties. In this study, the German safety inspection system and the enforcement procedures and the Swedish nuclear licensing system are analyzed in detail. By comparing and assessing the finding with the current Korea Nuclear Licensing System, this study points out some reform measures of the Korean system that needs to improved. With the changing situations in mind, this study aims to develop the nuclear safety regulation system optimized for Korean situation by re-examining the current regulation system. (Author)

Alternative electrical transmission systems and their environmental impact

Energy Technology Data Exchange (ETDEWEB)

Schiefelbein, G.F.

1977-08-01

A general description is provided of electrical transmission systems as an aid in determining their environmental impacts. Alternating current, direct current, overhead systems, underground systems, and water crossings are treated. The cost, performance, reliability, safety, and environmental impact of these systems are compared.

Study on some safety-related aspects of tyre use

NARCIS (Netherlands)

Jansen, S.T.H.; Schmeitz, A.J.C.; Maas, S.; Rodarius, C.; Akkermans, L.

2014-01-01

The tyre is a key component that affects road safety. The European commission has posted a tender aimed to study what measures on a European level can be taken in relation to the use of tyres to improve road safety. The results of this study, supported by a cost benefit analyses and carried out by

Plan for research to improve the safety of light-water nuclear power plants

International Nuclear Information System (INIS)

1978-03-01

This is the U.S. Nuclear Regulatory Commission's first annual report to Congress on recommendations for research on improving the safety of light-water nuclear power plants. Suggestions for reactor safety research were identified in, or received from, various sources, including the Advisory Committee on Reactor Safeguards, the NRC regulatory staff, and the consultants to the Research Review Group. After an initial screening to eliminate those not related to improved reactor safety, all the suggestions were consolidated into research topics. It is recommended that the following research projects be carried out: alternate containment concepts, especially vented containments; alternate decay heat removal concepts, especially add-on bunkered systems; alternate emergency core cooling concepts; improved in-plant accident response; and advanced seismic designs

A study of software safety analysis system for safety-critical software

International Nuclear Information System (INIS)

Chang, H. S.; Shin, H. K.; Chang, Y. W.; Jung, J. C.; Kim, J. H.; Han, H. H.; Son, H. S.

2004-01-01

The core factors and requirements for the safety-critical software traced and the methodology adopted in each stage of software life cycle are presented. In concept phase, Failure Modes and Effects Analysis (FMEA) for the system has been performed. The feasibility evaluation of selected safety parameter was performed and Preliminary Hazards Analysis list was prepared using HAZOP(Hazard and Operability) technique. And the check list for management control has been produced via walk-through technique. Based on the evaluation of the check list, activities to be performed in requirement phase have been determined. In the design phase, hazard analysis has been performed to check the safety capability of the system with regard to safety software algorithm using Fault Tree Analysis (FTA). In the test phase, the test items based on FMEA have been checked for fitness guided by an accident scenario. The pressurizer low pressure trip algorithm has been selected to apply FTA method to software safety analysis as a sample. By applying CASE tool, the requirements traceability of safety critical system has been enhanced during all of software life cycle phases

COLD-SAT feasibility study safety analysis

Science.gov (United States)

Mchenry, Steven T.; Yost, James M.

1991-01-01

The Cryogenic On-orbit Liquid Depot-Storage, Acquisition, and Transfer (COLD-SAT) satellite presents some unique safety issues. The feasibility study conducted at NASA-Lewis desired a systems safety program that would be involved from the initial design in order to eliminate and/or control the inherent hazards. Because of this, a hazards analysis method was needed that: (1) identified issues that needed to be addressed for a feasibility assessment; and (2) identified all potential hazards that would need to be controlled and/or eliminated during the detailed design phases. The developed analysis method is presented as well as the results generated for the COLD-SAT system.

77 FR 40358 - Meeting of the Scientific Advisory Committee on Alternative Toxicological Methods (SACATM)

Science.gov (United States)

2012-07-09

..., revised, and alternative safety testing methods with regulatory applicability and promotes the scientific... DEPARTMENT OF HEALTH AND HUMAN SERVICES Meeting of the Scientific Advisory Committee on Alternative Toxicological Methods (SACATM) AGENCY: Division of the National Toxicology Program (DNTP...

FY 1974 report on the results of the Sunshine Project. Study on a system to refine/transport/store hydrogen and the safety technology (Summary); 1974 nendo suiso no seisei yuso chozo system oyobi hoan gijutsu ni kansuru kenkyu seika hokokusho. Yoyakuban

Energy Technology Data Exchange (ETDEWEB)

NONE

1975-05-30

This study aims at the following. As to an alternative plan of the hydrogen distribution system, this paper makes the comprehensive evaluation from viewpoints of possibility, adaptability to society, economical efficiency, reliability, dynamic characteristics, etc., selects the most rational system and picked up the problems for realization of the system. It also sets up standards for safety technology relating to the hydrogen energy system and acquires the basic knowledge/information on concrete disaster prevention technology which backs up the standards. Among those, in this fiscal year, as system analysis of the hydrogen distribution system, study was made on system analysis of the system alternative plan and problems on system realization. Next, as an investigational study on safety technology in hydrogen energy system, the paper conducted the survey/collection in Japan and abroad of the present law, standards for handling, and examples of disaster/accident in relation to hydrogen, and the survey research on the concrete safety problem predicted. The paper studied the technology related to the safety problem required for safety. Industrial Research Institute, Japan, and the four companies under re-consignment made each report in which the results of the research were detailedly arranged. This paper is a summary of these reports. (NEDO)

Alternate aircraft fuels prospects and operational implications

Science.gov (United States)

Witcofski, R. D.

1977-01-01

The paper discusses NASA studies of the potentials of coal-derived aviation fuels, specifically synthetic aviation kerosene, liquid methane, and liquid hydrogen. Topics include areas of fuel production, air terminal requirements for aircraft fueling (for liquid hydrogen only), and the performance characteristics of aircraft designed to utilize alternate fuels. Energy requirements associated with the production of each of the three selected fuels are determined, and fuel prices are estimated. Subsonic commercial air transports using liquid hydrogen fuel have been analyzed, and their performance and the performance of aircraft which use commercial aviation kerosene are compared. Environmental and safety issues are considered.

Behavior-based safety on construction sites: a case study.

Science.gov (United States)

Choudhry, Rafiq M

2014-09-01

This work presents the results of a case study and describes an important area within the field of construction safety management, namely behavior-based safety (BBS). This paper adopts and develops a management approach for safety improvements in construction site environments. A rigorous behavioral safety system and its intervention program was implemented and deployed on target construction sites. After taking a few weeks of safety behavior measurements, the project management team implemented the designed intervention and measurements were taken. Goal-setting sessions were arranged on-site with workers' participation to set realistic and attainable targets of performance. Safety performance measurements continued and the levels of performance and the targets were presented on feedback charts. Supervisors were asked to give workers recognition and praise when they acted safely or improved critical behaviors. Observers were requested to have discussions with workers, visit the site, distribute training materials to workers, and provide feedback to crews and display charts. They were required to talk to operatives in the presence of line managers. It was necessary to develop awareness and understanding of what was being measured. In the process, operatives learned how to act safely when conducting site tasks using the designed checklists. Current weekly scores were discussed in the weekly safety meetings and other operational site meetings with emphasis on how to achieve set targets. The reliability of the safety performance measures taken by the company's observers was monitored. A clear increase in safety performance level was achieved across all categories: personal protective equipment; housekeeping; access to heights; plant and equipment, and scaffolding. The research reveals that scores of safety performance at one project improved from 86% (at the end of 3rd week) to 92.9% during the 9th week. The results of intervention demonstrated large decreases in

FMDP reactor alternative summary report: Volume 4, Evolutionary LWR alternative

International Nuclear Information System (INIS)

1996-09-01

Significant quantities of weapons-usable fissile materials [primarily plutonium and highly enriched uranium (HEU)] have become surplus to national defense needs both in the United States and Russia. These stocks of fissile materials pose significant dangers to national and international security. The dangers exist not only in the potential proliferation of nuclear weapons but also in the potential for environmental, safety, and health (ES ampersand H) consequences if surplus fissile materials are not properly managed. The purpose of this report is to provide schedule, cost, and technical information that will be used to support the Record of Process (ROD). Following the screening process, DOE/MD via its national laboratories initiated a more detailed analysis activity to further evaluate each of the ten plutonium disposition alternatives that survived the screening process. Three ''Alternative Teams,'' chartered by DOE and comprised of technical experts from across the DOE national laboratory complex, conducted these analyses. One team was chartered for each of the major disposition classes (borehole, immobilization, and reactors). During the last year and a half, the Fissile Materials Disposition Program (FMDP) Reactor Alternative Team (RxAT) has conducted extensive analyses of the cost, schedule, technical maturity, S ampersand S, and other characteristics of reactor-based plutonium disposition. The results of the RxAT's analyses of the existing LWR, CANDU, and partially complete LWR alternatives are documented in Volumes 1-3 of this report. This document (Volume 4) summarizes the results of these analyses for the ELWR-based plutonium disposition option

Age and workers' perceptions of workplace safety: a comparative study.

Science.gov (United States)

Gyekye, Seth Ayim; Salminen, Simo

2009-01-01

The study examined the relationship between age and (i) safety perception; (ii) job satisfaction; (iii) compliance with safety management policies; and (iv) accident frequency. Participants were Ghanaian industrial workers (N=320) categorized into 4 age groups: 19-29 years; 30-39 years; 40-50 years; and 51 years and above. Workplace safety perception was assessed with Hayes, Perander, Smecko, and Trask's (1998) 50-item Work Safety Scale (WSS): a scale that effectively captures the dimensions identified by safety experts to influence perceptions of workplace safety. ANOVA was used to test for differences in the mean scores of the 4 groups. Post Hoc analysis revealed differences of statistical significance between the 2 younger cohorts and the 2 older cohorts. The results indicated a positive association between age and safety perception. Older workers had the best perceptions on safety, indicated the highest level of job satisfaction, were the most compliant with safety procedures, and recorded the lowest accident involvement rate. From a practical perspective, understanding age-related perceptions of workplace safety would benefit management's decisions regarding workers' adaptability, general work effectiveness, accident frequency, implementation of safety management policies, and handling of age-related accident characteristics.

Experience With Laser Safety In The USA--A Review

Science.gov (United States)

Sliney, David H.

1986-10-01

Following several research programs in the 1960's aimed at studying the adverse biological effects of lasers and other optical radiation sources, laser occupational exposure limits were set and general safety standards were developed. Today, the experience from laser accidents and the development of new lasers and new applications have altered the format of the exposure limits and the safety procedures. It is critically important to distinguish between different biological injury mechanisms. The biological effects of ultraviolet radiation upon the skin and eye are additive over a period of at least one workday, and require different safety procedures. The scattered UV irradiance from excimer lasers may be quite hazardous, depending upon wavelength and action spectra. Since laser technology is young, the exposure of an individual in natural sunlight must be studied to evaluate the potential for chronic effects. The safety measures necessary in the use of lasers depend upon a hazard evaluation. The appropriate control measures and alternate means of enclosure, baffling, and operational control measures are presented. Present laser safety standards are explained briefly. Eye protective techniques and eyewear are considered for a variety of sources. The optical properties of enclosure materials are also discussed.

Prom Health and Safety Tips

Science.gov (United States)

... cost is an issue, look for alternatives to spending a lot of money. Expensive doesn't necessarily mean better. Plan ahead for safety Tell family members or a trusted adult what your plans are ahead of time. Make an agreement with friends to check on ...

Rock siting of nuclear power plants from a reactor safety standpoint

International Nuclear Information System (INIS)

1975-11-01

The study has aimed at surveying the advantages and disadvantages of a rock sited nuclear power plant from a reactor safety standpoint. The studies performed are almost entirely concentrated on the BWR alternative. The design of a nuclear power plant in rock judged most appropriate has been studied in greater detail, and a relatively extensive safety analysis has been made. It is found that the presented technical design of the rock sited alternative is sufficiently advanced to form a basis for further projecting treatment. The chosen technical design of the reactor plant demands a cavern with a 45-50 metre span. Caverns without strengthening efforts with such spans are used in mines, but have no previously been used for industrial plants. Studies of the stability of such caverns show that a safety level is attainable corresponding to the safety required for the other parts of the nuclear power plant. The conditions are that the rock is of high quality, that necessary strengthening measures are taken and that careful studies of the rock are made before and during the blasting, and also during operation of the plant. When locating a rock sited nuclear power plant, the same criteria must be considered as for an above ground plant, with additional stronger demands for rock quality. The presented rock sited nuclear power plant has been assessed to cost 20 % more in total construction costs than a corresponding above ground plant. The motivations for rock siting also depend on whether a condensing plant for only electricity production, or a plant for combined power production and district heating, is considered. The latter would under certain circumstances make rock siting look more attractive. (author)

Main lessons for FBR safety study from the CABRI experiments

International Nuclear Information System (INIS)

Sato, Ikken

2006-01-01

CABRI project has been carried out FBR safety study with international cooperation of five nations since 1978. The project consists of four periods such as CABRI-1, CABRI-2, CABRI-FAST and CABRI-RAFT. The objects and the main information for hypothetical core decay accident and safety study of fuel are described. The behavior of core decay accident was studied in the first period (CABRI-1), the safety study of fuel was investigated after the second period (CABRI-2). Change of phenomena at the initial process of core decay accident, comparison between analysis and data of fuel diffusion behavior of neutron horoscope by CABRI-2 experiment, representative in-core experiment under slow TOP conditions, the damaged and undamaged pin under slow TOP conditions, the exterior of CABRI and TREAT and the upper part of CABRI and TREAT reactor are shown. CABRI experiments changed to LWR safety study and a part of TREAT is stated. (S.Y.)

Implicit and explicit attitudes towards conventional and complementary and alternative medicine treatments: Introduction of an Implicit Association Test.

Science.gov (United States)

Green, James A; Hohmann, Cynthia; Lister, Kelsi; Albertyn, Riani; Bradshaw, Renee; Johnson, Christine

2016-06-01

This study examined associations between anticipated future health behaviour and participants' attitudes. Three Implicit Association Tests were developed to assess safety, efficacy and overall attitude. They were used to examine preference associations between conventional versus complementary and alternative medicine among 186 participants. A structural equation model suggested only a single implicit association, rather than three separate domains. However, this single implicit association predicted additional variance in anticipated future use of complementary and alternative medicine beyond explicit. Implicit measures should give further insight into motivation for complementary and alternative medicine use. © The Author(s) 2014.

Alternative types of roundabouts an informational guide

CERN Document Server

Tollazzi, Tomaž

2015-01-01

This book presents a history of roundabouts, an introduction to their design, calculations of their capacity and traffic-safety features. It describes the key features of standard roundabouts and their limitations. Alternative types of roundabouts are a fairly recent development and have only been implemented in a few countries to date. The book illustrates a broad variety of these recent alternative types of roundabouts, as well as proposed types still in the development phase, explaining for each the specific needs it meets, its advantages and drawbacks. In closing, the book offers an outlook on the role of roundabouts in future street traffic.

Study of fieldbus technology confiability when applied in a Sterilization plant control and safety systems

International Nuclear Information System (INIS)

Karma, D.; Sampa, M.H.O.; Rela, P.R.

2001-01-01

Several sterilization processes have been used in these years for treatment of countless products. Some processes use high temperatures, thermal shocks and chemical agents. With the discovery of the ionizing radiation and its posterior technological developments turned possible the application of that process, in 1960, also in the sterilization, denominated radiation sterilization. This process became also applied in another areas of health and industrial as food conservation, gemstones enhancement and others. The radiation sterilization requests an effective control and it needs a high level of safety. The commercial use of the computers applied in industrial automation provides and the domain of new technologies in this field provides news applications then new designs now is possible. The Fieldbus technology, a new digital communication protocol, like a Local Area Network, can be an alternative in the cobalt-60 irradiation plant. This paper show preliminary study about confiability in systems using Fieldbus technology. This technology was simulated in sterilization plant control and safety systems and the fail probability was quantified using Fail Tree Analysis Method. Fieldbus technology can be used in sterilization plants because the confiability in this systems is like PLCs and relays systems, was the conclusion

High-heat tank safety issue resolution program plan

International Nuclear Information System (INIS)

Wang, O.S.

1993-12-01

The purpose of this program plan is to provide a guide for selecting corrective actions that will mitigate and/or remediate the high-heat waste tank safety issue for single-shell tank (SST) 241-C-106. This program plan also outlines the logic for selecting approaches and tasks to mitigate and resolve the high-heat safety issue. The identified safety issue for high-heat tank 241-C-106 involves the potential release of nuclear waste to the environment as the result of heat-induced structural damage to the tank's concrete, if forced cooling is interrupted for extended periods. Currently, forced ventilation with added water to promote thermal conductivity and evaporation cooling is used to cool the waste. At this time, the only viable solution identified to resolve this safety issue is the removal of heat generating waste in the tank. This solution is being aggressively pursued as the permanent solution to this safety issue and also to support the present waste retrieval plan. Tank 241-C-106 has been selected as the first SST for retrieval. The program plan has three parts. The first part establishes program objectives and defines safety issues, drivers, and resolution criteria and strategy. The second part evaluates the high-heat safety issue and its mitigation and remediation methods and alternatives according to resolution logic. The third part identifies major tasks and alternatives for mitigation and resolution of the safety issue. Selected tasks and best-estimate schedules are also summarized in the program plan

LWR safety studies. Analyses and further assessments relating to the German Risk Assessment Study on Nuclear Power Plants. Vol. 1

International Nuclear Information System (INIS)

1983-01-01

This documentation of the activities of the Oeko-Institut is intended to show errors made and limits encountered in the experimental approaches and in results obtained by the work performed under phase A of the German Risk Assessment Study on Nuclear Power Plants (DRS). Concern is expressed and explained relating to the risk definition used in the Study, and the results of other studies relied on; specific problems of methodology are discussed with regard to the value of fault-tree/accident analyses for describing the course of safety-related events, and to the evaluations presented in the DRS. The Markov model is explained as an approach offering alternative solutions. The identification and quantification of common-mode failures is discussed. Origin, quality and methods of assessing the reliability characteristics used in the DRS as well as the statistical models for describing failure scenarios of reactor components and systems are critically reviewed. (RF) [de

Status of conceptual safety design study of Japanese sodium-cooled fast reactor

International Nuclear Information System (INIS)

Kubo, Shigenobu; Kurisaka, Kenichi; Niwa, Hajime; Shimakawa, Yoshio

2005-01-01

In this paper, the current conceptual safety design and related evaluation of Japanese Sodium-cooled Fast Reactor which is studied in the framework of the Feasibility Study (FS) on commercialized Fast Reactor Cycle Systems in Japan are described. The purpose of the safety design is to establish a feasible safety concept of FBR which aims at a sustainable energy source of the next generations. The safety targets and the safety design principle are set aiming at realizing worldwide acceptability of the safety level. The basic safety design concept, which can meet the safety targets, was formulated taking along with the defense-in-depth philosophy as the basic safety design principle. In order to cope with wide range of energy and resource demands, there are some various designs both of oxide and metal fuel for JSFR. Some analytical results of typical design basis events, design extension conditions and core damage frequency estimation show the feasibility of the safety design concept for them. (author)

Alternative approaches to food: Community supported agriculture in urban China

OpenAIRE

Krul, K.; Ho, P.P.S.

2017-01-01

One of the most remarkable features of China's development path is its large-scale and fast-paced urbanization. As cities already accommodate more than half of China's population, new challenges to urban food systems have emerged concurrently. Concerns over environmental degradation and food safety have provoked growing dissatisfaction with China's food regime. Amidst these concerns, the aim of this paper is to study the role of new and alternative approaches to food, focusing in on the quest...

The use of risk criteria in comparing transportation alternatives

NARCIS (Netherlands)

Boot, H.

2013-01-01

For the transportation of dangerous substances, several modes of transportation are possible. If there are multiple possibilities, it is relevant to compare the safety of the transportation alternatives. TNO has developed a consistent method to compare the different transportation modes, using

Studies on Labour Safety in Construction Sites

Directory of Open Access Journals (Sweden)

S. Kanchana

2015-01-01

Full Text Available Construction industry has accomplished extensive growth worldwide particularly in past few decades. For a construction project to be successful, safety of the structures as well as that of the personnel is of utmost importance. The safety issues are to be considered right from the design stage till the completion and handing over of the structure. Construction industry employs skilled and unskilled labourers subject to construction site accidents and health risks. A proper coordination between contractors, clients, and workforce is needed for safe work conditions which are very much lacking in Indian construction companies. Though labour safety laws are available, the numerous accidents taking place at construction sites are continuing. Management commitment towards health and safety of the workers is also lagging. A detailed literature study was carried out to understand the causes of accidents, preventive measures, and development of safe work environment. This paper presents the results of a questionnaire survey, which was distributed among various categories of construction workers in Kerala region. The paper examines and discusses in detail the total working hours, work shifts, nativity of the workers, number of accidents, and type of injuries taking place in small and large construction sites.

Studies on Labour Safety in Construction Sites

Science.gov (United States)

Kanchana, S.; Sivaprakash, P.; Joseph, Sebastian

2015-01-01

Construction industry has accomplished extensive growth worldwide particularly in past few decades. For a construction project to be successful, safety of the structures as well as that of the personnel is of utmost importance. The safety issues are to be considered right from the design stage till the completion and handing over of the structure. Construction industry employs skilled and unskilled labourers subject to construction site accidents and health risks. A proper coordination between contractors, clients, and workforce is needed for safe work conditions which are very much lacking in Indian construction companies. Though labour safety laws are available, the numerous accidents taking place at construction sites are continuing. Management commitment towards health and safety of the workers is also lagging. A detailed literature study was carried out to understand the causes of accidents, preventive measures, and development of safe work environment. This paper presents the results of a questionnaire survey, which was distributed among various categories of construction workers in Kerala region. The paper examines and discusses in detail the total working hours, work shifts, nativity of the workers, number of accidents, and type of injuries taking place in small and large construction sites. PMID:26839916

Comparative Theology: An Alternative to Religious Studies or Theology of Religions?

Directory of Open Access Journals (Sweden)

Betül AVCI

2018-03-01

Full Text Available This paper examines the relationship between Comparative Theology, Religious Studies and Theology of Religions and questions whether Comparative Theology is an alternative to the last two. Comparative Theology, a faith seeking understanding practice, may be viewed as an alternative to the Enlightenment ideal of Religious Studies, which seeks “impartiality” and “scientific objectivity” in contrast to Comparative Theology’s enquiry into “truth” and “meaning.” I suggest, however, that the comparative method employed by both Religious Studies and Comparative Theology is not a neutral space. Hence, the new comparativism in Religious Studies reinstates its search for understanding and its political stand, which blurs the boundaries between Comparative Theology and Religious Studies. Likewise, while Comparative Theology is distinct from the Theology of Religions, it does not pose an alternative to it because Comparative Theology, too, often embodies either a pluralist or an inclusivist approach.

Safety-licensing assessment of NASAP reactor concepts and fuel cycle facilities

International Nuclear Information System (INIS)

Lipinski, W.C.; Prohammer, F.G.; van Erp, J.B.; Seefeldt, W.B.

1978-06-01

Assessments are presented of the safety/licensability of reactor concepts based on information supplied by the Nonproliferation Alternative Systems Assessment Program (NASAP) characterization contractors in their updated responses to the data package for NASAP Rolling Report II. The assessment of the LMFBR includes information from a characterization contractor on alternate fuel cycles but does not include information provided by a characterization contractor on plant-related safety issues. The information provided by the characterization contractors was supplemented by assessments provided by the U. S. Nuclear Regulatory Commission

Fusion-reactor blanket-material safety-compatibility studies

International Nuclear Information System (INIS)

Jeppson, D.W.; Muhlestein, L.D.; Keough, R.F.; Cohen, S.

1982-11-01

Blanket material selection for fusion reactors is strongly influenced by the desire to minimize safety and environmental concerns. Blanket material safety compatibility studies are being conducted to identify and characterize blanket-coolant-material interactions under postulated reactor accident conditions. Recently completed scoping compatibility tests indicate that : (1) ternary oxides (LiAlO 2 , Li 2 ZrO 3 , Li 2 SiO 3 , Li 4 SiO 4 and LiTiO 3 ) at postulated blanket operating temperatures are compatible with water coolant, while liquid lithium and Li 7 Pb 2 alloy reactions with water generate heat, aerosol and hydrogen; (2) lithium oxide and Li 17 Pb 83 alloy react mildly with water requiring special precautions to control hydrogen release; (3) liquid lithium reacts substantially, while Li 17 Pb 83 alloy reacts mildly with concrete to produce hydrogen; and (4) liquid lithium-air reactions present some major safety concerns

Review of light--water reactor safety studies. Volume 3 of health and safety impacts of nuclear, geothermal, and fossil-fuel electric generation in California

International Nuclear Information System (INIS)

Nero, A.V.; Farnaam, M.R.K.

1977-01-01

This report summarizes and compares important studies of light-water nuclear reactor safety, emphasizing the Nuclear Regulatory Commission's Reactor Safety Study, work on risk assessment funded by the Electric Power Research Institute, and the Report of the American Physical Society study group on light-water reactor safety. These reports treat risk assessment for nuclear power plants and provide an introduction to the basic issues in reactor safety and the needs of the reactor safety research program. Earlier studies are treated more briefly. The report includes comments on the Reactor Safety Study. The manner in which these studies may be used and alterations which would increase their utility are discussed

Assessment of a satellite power system and six alternative technologies

Energy Technology Data Exchange (ETDEWEB)

Wolsko, T.; Whitfield, R.; Samsa, M.; Habegger, L.S.; Levine, E.; Tanzman, E.

1981-04-01

The satellite power system is assessed in comparison to six alternative technologies. The alternatives are: central-station terrestrial photovoltaic systems, conventional coal-fired power plants, coal-gasification/combined-cycle power plants, light water reactor power plants, liquid-metal fast-breeder reactors, and fusion. The comparison is made regarding issues of cost and performance, health and safety, environmental effects, resources, socio-economic factors, and insitutional issues. The criteria for selecting the issues and the alternative technologies are given, and the methodology of the comparison is discussed. Brief descriptions of each of the technologies considered are included. (LEW)

Alternative to Nitric Acid Passivation

Science.gov (United States)

Kessel, Kurt R.

2016-01-01

Corrosion is an extensive problem that affects the National Aeronautics and Space Administration (NASA) and European Space Agency (ESA). The deleterious effects of corrosion result in steep costs, asset downtime affecting mission readiness, and safety risks to personnel. It is vital to reduce corrosion costs and risks in a sustainable manner. The primary objective of this effort is to qualify citric acid as an environmentally-preferable alternative to nitric acid for passivation of stainless steel alloys.

Safety evaluation status report for the prototype license application safety analysis report

International Nuclear Information System (INIS)

1989-07-01

The US Nuclear Regulatory Commission (NRC) staff and consultants reviewed a Prototype License Application Safety Analysis Report (PLASAR) submitted by the US Department of Energy (DOE) for the earth-mounded concrete bunker (EMCB) alternative method of low-level radioactive waste disposal. The NRC reviewers relied extensively on the Standard Review Plan (SRP), Rev.1 (NUREG-1200), to evaluate the acceptability of the information provided in the EMCB PLASAR. The NRC staff selected certain review areas in the PLASAR for development of safety evaluation report input to provide examples of safety assessments that are necessary as part of a licensing review. Because of the fictitious nature of the assumed disposal site, and the decision to limit the review to essentially first-round review status, the NRC staff report is labeled a ''Safety Evaluation Status Report'' (SESR). Appendix A comprises the NRC review comments and questions on the information that DOE submitted in the PLASAR. The NRC concentrated its review on the design and operations-related portions of the EMCB PLASAR

Insights on in vitro models for safety and toxicity assessment of cosmetic ingredients.

Science.gov (United States)

Almeida, Andreia; Sarmento, Bruno; Rodrigues, Francisca

2017-03-15

According to the current European legislation, the safety assessment of each individual cosmetic ingredient of any formulation is the basis for the safety evaluation of a cosmetic product. Also, animal testing in the European Union is prohibited for cosmetic ingredients and products since 2004 and 2009, respectively. Additionally, the commercialization of any cosmetic products containing ingredients tested on animal models was forbidden in 2009. In consequence of these boundaries, the European Centre for the Validation of Alternative Methods (ECVAM) proposes a list of validated cell-based in vitro models for predicting the safety and toxicity of cosmetic ingredients. These models have been demonstrated as valuable and effective tools to overcome the limitations of animal in vivo studies. Although the use of in vitro cell-based models for the evaluation of absorption and permeability of cosmetic ingredients is widespread, a detailed study on the properties of these platforms and the in vitro-in vivo correlation compared with human data are required. Moreover, additional efforts must be taken to develop in vitro models to predict carcinogenicity, repeat dose toxicity and reproductive toxicity, for which no alternative in vitro methods are currently available. This review paper summarizes and characterizes the most relevant in vitro models validated by ECVAM employed to predict the safety and toxicology of cosmetic ingredients. Copyright © 2017 Elsevier B.V. All rights reserved.

Diversity requirements for safety critical software-based automation systems

International Nuclear Information System (INIS)

Korhonen, J.; Pulkkinen, U.; Haapanen, P.

1998-03-01

System vendors nowadays propose software-based systems even for the most critical safety functions in nuclear power plants. Due to the nature and mechanisms of influence of software faults new methods are needed for the safety and reliability evaluation of these systems. In the research project 'Programmable automation systems in nuclear power plants (OHA)' various safety assessment methods and tools for software based systems are developed and evaluated. This report first discusses the (common cause) failure mechanisms in software-based systems, then defines fault-tolerant system architectures to avoid common cause failures, then studies the various alternatives to apply diversity and their influence on system reliability. Finally, a method for the assessment of diversity is described. Other recently published reports in OHA-report series handles the statistical reliability assessment of software based (STUK-YTO-TR 119), usage models in reliability assessment of software-based systems (STUK-YTO-TR 128) and handling of programmable automation in plant PSA-studies (STUK-YTO-TR 129)

Preliminary Study on the Development of Quantitative Safety Culture Index

International Nuclear Information System (INIS)

Lee, Young Eal; Kim, Hun Sil; Ahn, Nam Sung

2005-01-01

Safety culture is that assembly of characteristics and attitudes in organizations and individuals which establishes that, as an overriding priority, nuclear plant safety issues receive the attention warranted by their significance. Because it needs to be recognized as the most significant consciousness to achieve the nuclear safety performance, Korean government and nuclear power generation company have tried to develop the practical method to improve the safety culture from the long term point view. In this study, based on the site interviews to define the potential issues on organizational behavior for the safe operation and the survey on the level of safety culture of occupied workers are conducted. Survey results are quantified as a few indicators of nuclear safety by the statistical method and it can be simulated by the dynamic modeling as time goes on. Currently index and dynamic modeling are still being developed, however, results can be used to suggest the long term strategy which safety is clearly integrated into all activities in the nuclear organization

Safety assessment for a KBS-3H spent nuclear fuel repository at Olkiluoto. Complementary evaluations of safety

International Nuclear Information System (INIS)

Neall, Fiona; Pastina, Barbara; Snellman, Margit; Smith, Paul; Gribi, P.; Johnson, Lawrence

2008-12-01

The KBS-3H design is a variant of the more general KBS-3 method for the geological disposal of spent nuclear fuel in Finland and Sweden. In the KBS-3H design, multiple assemblies containing spent fuel are emplaced horizontally in parallel, approximately 300 m long, slightly inclined deposition drifts. The copper canisters, each with a surrounding layer of bentonite clay, are placed in perforated steel shells prior to deposition in the drifts; the assembly is called the 'supercontainer'. The other KBS-3 variant is the KBS-3V design, in which the copper canisters are emplaced vertically in individual deposition holes surrounded by bentonite clay but without steel supercontainer shells. SKB and Posiva have conducted a Research, Development and Demonstration programme over the period 2002-2007 with the overall aim of establishing whether KBS-3H represents a feasible alternative to KBS-3V. As part of this programme, the long-term safety of a KBS-3H repository has been assessed in the KBS-3H safety studies. In order to focus the safety studies, the Olkiluoto site in the municipality of Eurajoki, which is the proposed site for a spent fuel repository in Finland, was used as a hypothetical site for a KBS-3H repository. The present report is part of a portfolio of reports discussing the long-term safety of the KBS-3H repository. The overall outcome of the KBS-3H safety studies is documented in the summary report, 'Safety assessment for a KBS-3H repository for spent nuclear fuel at Olkiluoto'. The purpose and scope of the KBS-3H complementary evaluations of safety report is provided in Posiva's Safety Case Plan, which is based on Regulatory Guide YVL 8.4 and on international guidelines on complementary lines of argument to long-term safety that are considered an important element of a post-closure safety case for geological repositories. Complementary evaluations of safety require the use of evaluations, evidence and qualitative supporting arguments that lie outside the

78 FR 54510 - New Entrant Safety Assurance Program Operational Test

Science.gov (United States)

2013-09-04

... safety management controls; (2) consider their effects on small businesses; and (3) consider establishing alternate locations where such reviews may be conducted for the convenience of small businesses. In response... safety review within 18 months of starting interstate operations. [49 U.S.C. 31144(g)]. In issuing these...

Study Of Safety Management By Using Gis In Coimbatore

Directory of Open Access Journals (Sweden)

S. Kanchana

2015-08-01

Full Text Available The safety management is very important in the process of construction .The traditional methods of construction safety control cannot meet the construction of big project. To ensure the safety of construction and reduce accidents in the process of construction the current situation and problems we face in construction safety management should be studied first. And then the project risk warning mechanism based on the GIS is constructed according to the problems we faced to achieve visual monitoring and warning of construction safety risk management and to provide decision support for construction. This project aims to develop a web-based spatial decision support system model for proactive health and safety management in linear construction projects. 5 Currently health and safety management is usually performed reactively instead of proactive management since hazard identification and risk assessment is mostly performed on paper based documents that are not effectively used at site. An information system relates to a chain of operations lead to planning the observation and collection of data to storage and analysis of data to the use of derived information in decision-making processes. To create a web-based free and open sourced GIS that can work with different data formats by exchanging and presenting data as a real-time map on web.

Feasibility Study of Alternative Fabrication Methods.

Science.gov (United States)

1979-08-01

must comply with the I requirements of the latest edition of the National Electrical Code. The Body and Liner Assembly System will comply with I the...latest edition of the National Electrical Code per AMCR 385 (Army Material Command Safety Manual). Also, OSHA’s 1 Occupational Safety and Health...the top of the elevator. On the top and at the rear of * A-4 50 UD( AISA 6 --7 G OVe CASE THOMS ’ON J .7O37IA (PLACES) _ _ -- 3. BAL - 1N-TOS10 12N

Artificial oxygen carriers as a possible alternative to red cells in clinical practice

Directory of Open Access Journals (Sweden)

Fabiano Timbó Barbosa

Full Text Available Fluid resuscitation is intended to eliminate microcirculatory disorders and restore adequate tissue oxygenation. The safety limits for a restrictive transfusion policy are given by patients' individual tolerance of acute normovolemic anemia. Artificial oxygen carriers based on perfluorocarbon or hemoglobin are attractive alternatives to allogenic red blood cells. There are many risks involved in allogenic blood transfusions and they include transmission of infections, delayed postoperative wound healing, transfusion reactions, immunomodulation and cancer recurrence. Regardless of whether artificial oxygen carriers are available for routine clinical use, further studies are needed in order to show the safety and efficacy of these substances for clinical practice.

Comparative Theology: An Alternative to Religious Studies or Theology of Religions?

OpenAIRE

Betül AVCI

2018-01-01

This paper examines the relationship between Comparative Theology, Religious Studies and Theology of Religions and questions whether Comparative Theology is an alternative to the last two. Comparative Theology, a faith seeking understanding practice, may be viewed as an alternative to the Enlightenment ideal of Religious Studies, which seeks “impartiality” and “scientific objectivity” in contrast to Comparative Theology’s enquiry into “truth” and “meaning.” I suggest, however, that the compar...

Neurovirulence safety testing of mumps vaccines--historical perspective and current status.

Science.gov (United States)

Rubin, S A; Afzal, M A

2011-04-05

Many live, attenuated viral vaccines are derived from wild type viruses with known neurovirulent properties. To assure the absence of residual neurotoxicity, pre-clinical neurovirulence safety testing of candidate vaccines is performed. For mumps virus, a highly neurotropic virus, neurovirulence safety testing is performed in monkeys. However, laboratory studies suggest an inability of this test to correctly discern among virus strains of varying neurovirulence potential in man, and, further, some vaccines found to be neuroattenuated in monkeys were later found to be neurovirulent in humans when administered in large numbers. Over the past decade, concerted efforts have been made to replace monkey-based neurovirulence safety testing with more informative, alternative methods. This review summarizes the current status of mumps vaccine neurovirulence safety testing and insights into models currently approved and those under development. Published by Elsevier Ltd.

Study of surface potential contamination in radioisotope and radiopharmaceutical production facilities and alternative solutions

International Nuclear Information System (INIS)

Suhaedi Muhammad; Rimin Sumantri; Farida Tusafariah; Djarwanti Rahayu Pipin Soedjarwo

2013-01-01

Radioisotope and radiopharmaceutical production facilities that exist in their operations around the world in the form of radiological impacts of radiation exposure, contamination of surface and air contamination. Given the number of existing open source in radioisotope and radiopharmaceutical production facility, then the possibility of surface contamination in the work area is quite high. For that to protect the safety and health of both workers, the public and the environment, then the licensee must conduct an inventory of some of the potential that could result in contamination of surfaces in radioisotope and radiopharmaceutical production facilities. Several potential to cause surface contamination in radioisotope and radiopharmaceutical production facilities consist of loss of resources, the VAC system disorders, impaired production facilities, limited resources and lack of work discipline and radioactive waste handling activities. From the study of some potential, there are several alternative solutions that can be implemented by the licensee to address the contamination of the surface so as not to cause adverse radiological impacts for both radiation workers, the public or the environment. (author)

Analysis of alternatives for immobilized low activity waste disposal

Energy Technology Data Exchange (ETDEWEB)

Burbank, D.A.

1997-10-28

This report presents a study of alternative disposal system architectures and implementation strategies to provide onsite near-surface disposal capacity to receive the immobilized low-activity waste produced by the private vendors. The analysis shows that a flexible unit strategy that provides a suite of design solutions tailored to the characteristics of the immobilized low-activity waste will provide a disposal system that best meets the program goals of reducing the environmental, health, and safety impacts; meeting the schedule milestones; and minimizing the life-cycle cost of the program.

Analysis of alternatives for immobilized low-activity waste disposal

International Nuclear Information System (INIS)

Burbank, D.A.

1997-01-01

This report presents a study of alternative disposal system architectures and implementation strategies to provide onsite near-surface disposal capacity to receive the immobilized low-activity waste produced by the private vendors. The analysis shows that a flexible unit strategy that provides a suite of design solutions tailored to the characteristics of the immobilized low-activity waste will provide a disposal system that best meets the program goals of reducing the environmental, health, and safety impacts; meeting the schedule milestones; and minimizing the life-cycle cost of the program

Research and development studies on the seismic behaviour of the PEC fast reactor (safety analysis detailed report no. 8)

Energy Technology Data Exchange (ETDEWEB)

Martelli, A.; Forni, M.; Masoni, P.; Maresca, G.; Castoldi, A.; Muzzi, F. [ENEA, Rome (Italy); Ansaldo Spa, Genoa [Italy; ISMES Spa, Bergamo [Italy

1988-01-15

This paper presents the main features and results of the numerical and experimental studies that were carried out by ENEA (Italian Commission for Alternative Energy Sources) for the seismic verification of the Italian PEC fast reactor test facility. More precisely, the paper focuses on the wide-ranging research and development programme that has been performed (and recently completed) on the reactor building, the reactor-block, the main vessel, the core and the shutdown system. The needs of these detailed studies are stressed and the feed-backs on the design, necessary safisfy the seismic safety requirements, are recalled. The general validity of the analyses in the framework of the research and development activities for nuclear reactor is also pointed out.

Design an optimum safety policy for personnel safety management - A system dynamic approach

International Nuclear Information System (INIS)

Balaji, P.

2014-01-01

Personnel safety management (PSM) ensures that employee's work conditions are healthy and safe by various proactive and reactive approaches. Nowadays it is a complex phenomenon because of increasing dynamic nature of organisations which results in an increase of accidents. An important part of accident prevention is to understand the existing system properly and make safety strategies for that system. System dynamics modelling appears to be an appropriate methodology to explore and make strategy for PSM. Many system dynamics models of industrial systems have been built entirely for specific host firms. This thesis illustrates an alternative approach. The generic system dynamics model of Personnel safety management was developed and tested in a host firm. The model was undergone various structural, behavioural and policy tests. The utility and effectiveness of model was further explored through modelling a safety scenario. In order to create effective safety policy under resource constraint, DOE (Design of experiment) was used. DOE uses classic designs, namely, fractional factorials and central composite designs. It used to make second order regression equation which serve as an objective function. That function was optimized under budget constraint and optimum value used for safety policy which shown greatest improvement in overall PSM. The outcome of this research indicates that personnel safety management model has the capability for acting as instruction tool to improve understanding of safety management and also as an aid to policy making

Design an optimum safety policy for personnel safety management - A system dynamic approach

Energy Technology Data Exchange (ETDEWEB)

Balaji, P. [The Glocal University, Mirzapur Pole, Delhi- Yamuntori Highway, Saharanpur 2470001 (India)

2014-10-06

Personnel safety management (PSM) ensures that employee's work conditions are healthy and safe by various proactive and reactive approaches. Nowadays it is a complex phenomenon because of increasing dynamic nature of organisations which results in an increase of accidents. An important part of accident prevention is to understand the existing system properly and make safety strategies for that system. System dynamics modelling appears to be an appropriate methodology to explore and make strategy for PSM. Many system dynamics models of industrial systems have been built entirely for specific host firms. This thesis illustrates an alternative approach. The generic system dynamics model of Personnel safety management was developed and tested in a host firm. The model was undergone various structural, behavioural and policy tests. The utility and effectiveness of model was further explored through modelling a safety scenario. In order to create effective safety policy under resource constraint, DOE (Design of experiment) was used. DOE uses classic designs, namely, fractional factorials and central composite designs. It used to make second order regression equation which serve as an objective function. That function was optimized under budget constraint and optimum value used for safety policy which shown greatest improvement in overall PSM. The outcome of this research indicates that personnel safety management model has the capability for acting as instruction tool to improve understanding of safety management and also as an aid to policy making.

Design an optimum safety policy for personnel safety management - A system dynamic approach

Science.gov (United States)

Balaji, P.

2014-10-01

Personnel safety management (PSM) ensures that employee's work conditions are healthy and safe by various proactive and reactive approaches. Nowadays it is a complex phenomenon because of increasing dynamic nature of organisations which results in an increase of accidents. An important part of accident prevention is to understand the existing system properly and make safety strategies for that system. System dynamics modelling appears to be an appropriate methodology to explore and make strategy for PSM. Many system dynamics models of industrial systems have been built entirely for specific host firms. This thesis illustrates an alternative approach. The generic system dynamics model of Personnel safety management was developed and tested in a host firm. The model was undergone various structural, behavioural and policy tests. The utility and effectiveness of model was further explored through modelling a safety scenario. In order to create effective safety policy under resource constraint, DOE (Design of experiment) was used. DOE uses classic designs, namely, fractional factorials and central composite designs. It used to make second order regression equation which serve as an objective function. That function was optimized under budget constraint and optimum value used for safety policy which shown greatest improvement in overall PSM. The outcome of this research indicates that personnel safety management model has the capability for acting as instruction tool to improve understanding of safety management and also as an aid to policy making.

Safety of pressurized water reactors: problems and corresponding studies

International Nuclear Information System (INIS)

Cogne, F.

1976-01-01

The author recalls the safety problems subject to researches in the CEA, either because of their importance or because studies made abroad were not sufficiently developed or were classified or in order to acquire an independent judgement when safety is concerned. Those problems and studies are submitted referring to the 3 existing shields between man and dangerous materials: fuel element can, thermal shield, (pressure vessel and pipes), biological shield of which the behaviour is studied in connection with outside aggressions such as earthquakes, plane crashes, chemical explosions.. [fr

75 FR 5333 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2010-02-02

...) Place: Embassy Suites Hotel, 1900 Diagonal Road, Alexandria, Virginia 22314, Telephone (703) 684-5900... matters related to the conduct of Study Section business and for the study section to consider safety and...

Health and Safety Research Division progress report for period ending April 30, 1978

Energy Technology Data Exchange (ETDEWEB)

Kaye, S.V.

1978-08-01

The research goal of the Health and Safety Research Division is to conduct basic and applied research that contributes new scientific knowledge with emphasis in biophysical areas that lead to a better understanding of how alternative energy-related technologies affect man. Included in the basic research are fundamental processes that are important to understand formation, mobility, toxicity, detection, and characterization of pollutants. The applied research includes the integration of data from basic and applied studies through development of concepts and methodologies that can be used for energy-related assessments with primary focus on the health and safety of man. The division has no responsibilities for on-site health and safety.

Radwaste Disposal Safety Analysis

International Nuclear Information System (INIS)

Hwang, Yong Soo; Kang, C. H.; Lee, Y. M.; Lee, S. H.; Jeong, J. T.; Choi, J. W.; Park, S. W.; Lee, H. S.; Kim, J. H.; Jeong, M. S.

2010-02-01

For the purpose of evaluating annual individual doses from a potential repository disposing of radioactive wastes from the operation of the prospective advanced nuclear fuel cycle facilities in Korea, the new safety assessment approaches are developed such as PID methods. The existing KAERI FEP list was reviewed. Based on these new reference and alternative scenarios are developed along with a new code based on the Goldsim. The code based on the compartment theory can be applied to assess both normal and what if scenarios. In addition detailed studies on THRC coupling is studied. The oriental biosphere study ends with great success over the completion of code V and V with JAEA. The further development of quality assurance, in the form of the CYPRUS+ enables handy use of it for information management

Abstract of results of safety study. Nuclear fuel cycle field in fiscal 2003

International Nuclear Information System (INIS)

2004-11-01

This report descried the results of studies of nuclear fuel cycle field (nuclear fuel facilities, seismic design, all subjects of environmental radiation and waste disposal, and subjects on nuclear fuel cycle in probabilistic safety assessment) in fiscal 2003 on the basis of the principle project of safety study (from fiscal 2001 to 2005). It consists of four chapters; the first chapter is outline of the principle of project, the second is objects and subjects of safety study in the nuclear fuel cycle field, the third list of questionnaire of results of safety study and the forth investigation of results of safety study in fiscal 2003. There are 49 lists, which include 22 reports on the nuclear fuel facility, one on the seismic design, 4 on the probabilistic safety assessment, 7 on the environmental radiation and 15 on the waste disposal. (S.Y.)

A feasibility study for Arizona's roadway safety management process using the Highway Safety Manual and SafetyAnalyst : final report.

Science.gov (United States)

2016-07-01

To enable implementation of the American Association of State Highway Transportation (AASHTO) Highway Safety Manual using : SaftetyAnalyst (an AASHTOWare software product), the Arizona Department of Transportation (ADOT) studied the data assessment :...

Safety study of PCC 2140 and ALILOG 21 used as part of safety measurement systems

International Nuclear Information System (INIS)

Meriaux, Pierre; Adnot, Serge; Rayrolles, Catherine.

1978-03-01

The PCC 2140 and ALILOG 21 equipment may be used at C.E.A. or E.D.F., as part of safety measurement systems. In a study of a similar, but earlier equipment, it was noticed that certain types of failures caused the system to switch to the least sensitive measurement range, which was detrimental to safety. This report analyses failure modes leading to unsafe failures and evaluates the risks ran into taking in account tests during use [fr

Echocardiography-based hemodynamic management of left ventricular diastolic dysfunction: a feasibility and safety study.

Science.gov (United States)

Shillcutt, Sasha K; Montzingo, Candice R; Agrawal, Ankit; Khaleel, Maseeha S; Therrien, Stacey L; Thomas, Walker R; Porter, Thomas R; Brakke, Tara R

2014-11-01

Patients with left ventricular diastolic dysfunction (LVDD) are at increased risk of postoperative adverse events. The primary aim of this study was to evaluate the safety and feasibility of using echocardiography-guided hemodynamic management (EGHEM) during surgery in subjects with LVDD compared to conventional management. The feasibility of using echocardiography to direct a treatment algorithm and clinical outcomes were compared for safety between groups. Subjects were screened for LVDD by preoperative transthoracic echocardiography (TTE) and randomized to the conventional or EGHEM group. Subjects in EGHEM received hemodynamic management based on left ventricular filling patterns on transesophageal echocardiography (TEE). Primary outcomes measured were the feasibility to obtain TEE images and follow a TEE-based treatment algorithm. Safety outcomes also compared the following clinical differences between groups: length of hospitalization, incidence of atrial fibrillation, congestive heart failure (CHF), myocardial infarction, cerebrovascular accident, transient ischemic attack and renal failure measured 30 days postoperatively. Population consisted of 28 surgical subjects (14 in conventional group and 14 in EGHEM group). Mean subject age was 73.4 ± 6.7 years (36% male) in conventional group and 65.9 ± 14.4 years (36% male) in EGHEM group. Procedures included orthopedic (conventional = 29%, EGHEM 36%), general (conventional = 50%, EGHEM = 36%), vascular (conventional = 7%, EGHEM = 21%), and thoracic (conventional = 14%, EGHEM = 7%). There was no statistically significant difference in adverse clinical events between the 2 groups. The EGHEM group had less CHF, atrial fibrillation, and shorter length of stay. Echocardiography-guided hemodynamic management of patients with LVDD during surgery is feasible and may be a safe alternative to conventional management. © 2014, Wiley Periodicals, Inc.

A 90-day safety study in Sprague-Dawley rats fed milk powder containing recombinant human lactoferrin (rhLF) derived from transgenic cloned cattle.

Science.gov (United States)

Zhou, Cui; Wang, Jian Wu; Huang, Kun Lun; He, XiaoYun; Chen, Xiu Ping; Sun, Hong; Yu, Tian; Che, Hui Lian

2011-10-01

Transgenic cloned animals expressing beneficial human nutritional traits offer a new strategy for large-scale production of some kinds of functional substances. In some cases, the required safety testing for genetically modified (GM) foods do not seem appropriate for human food safety, though regulations do not seem to provide alternatives. A 90-day rat feeding study is the core study for the safety assessment of GM foods. The test material in this 90-day study was prepared nonfat milk powder containing recombinant human lactoferrin (rhLF), which was expressed in transgenic cloned cattle. Groups of 10 male and female Sprague-Dawley rats were given a nutritionally balanced purified diet containing 7.5, 15, or 30% transgenic or conventional milk powder for 90 days. A commercial AIN93G diet was used as an additional control group. Clinical, biological, and pathological parameters were compared between groups. The only significant effect of treatment was higher mean ferritin and Fe(+) concentrations for both male and female rats fed the transgenic milk powder diets, as compared to rats fed nontransgenic milk diets or the commercial diet. The results of the present study are consistent with previous research, which indicates that milk powder containing rhLF derived from healthy transgenic cloned cattle is as safe as conventional milk powder.

Empirical Analysis of Construction Safety Climate - A Study

OpenAIRE

S.V.S.RAJA PRASAD; K.P.REGHUNATH

2010-01-01

Safety in the construction industry has always been a major issue. Though much improvement in construction safety has been achieved, the industry still continues to lag behind most other industries with regard to safety. The safety climate of any organization consists of employee’s attitudes towards and perceptions of, health and safety behavior. Construction workers attitudes towards safety are influenced by their perceptions of risk, management, safety rulesand procedures. A measure of safe...

Supplementary study about the ATC generic project. Alternative storage for encapsulated fuel

International Nuclear Information System (INIS)

Canadas Martinez, I.

2010-01-01

The objective of this study is to present the alternatives for a complementary installation and facilitate the decision making on the best solution, keeping many determining factors in mind. Two are the alternatives studied: supplementary storage, similar to the Trillo Nuclear Power Plant, and outdoor storage, similar to the Asco and Jose Cabrera Nuclear Power Plants.

Comparative theology: an alternative to religious studies or theology of religions?

OpenAIRE

Avcı, Betül

2018-01-01

Avcı, Betül (IHU Author) This paper examines the relationship between Comparative Theology, Religious Studies and Theology of Religions and questions whether Comparative Theology is an alternative to the last two. Comparative Theology, a faith seeking understanding practice, may be viewed as an alternative to the Enlightenment ideal of Religious Studies, which seeks “impartiality” and “scientific objectivity” in contrast to Comparative Theology’s enquiry into “truth” and “meaning.” I sugge...

Alternative policy study. Environment and energy in Europe and Central Asia 1990-2010. Energy-related environmental impacts of policy scenarios. GEO 2000 alternative policy study

International Nuclear Information System (INIS)

Van Vuuren, D.P.; Bakkes, J.A.

2000-01-01

The GEO-2000 study into alternative policy options for Europe and Central Asia focuses on energy use as an important driver for environmental problems across the region. The problems analyzed are climate change, acidification, summer smog, urban air pollution and risks of reactor accidents associated with nuclear power generation. The analysis includes the effects on biodiversity and population health. It considers the question of what can be achieved by moderate measures, and whether this will be enough. Similar Geo-2000 region-specific studies on alternative policies have been compiled other world regions. This report outliners the general methodology for these reports

Evaluation of Alternative Control for Prevention and or Mitigation of HEPA Filter Failure Accidents at Tank Farm Facilities

International Nuclear Information System (INIS)

GUSTAVSON, R.D.

2000-01-01

This study evaluates the adequacy and benefit of use of HEPA filter differential pressure limiting setpoints to initiate exhauster shut down as an alternative safety control for postulated accidents that might result in filtration failure and subsequent unfiltered release from Tank Farm primary tank ventilators

Contractors’ Attitude towards Enhancing Safety Performance: Case Study on Construction Firms in Penang

Directory of Open Access Journals (Sweden)

Ulang N. Md

2014-01-01

Full Text Available A qualitative study was conducted to investigate the contractors’ attitude towards enhancing the safety performance in construction site. Despite the fact that there are many safety initiatives established by the government, the rates of accidents are still in a critically high condition. Thus the purpose of this research is to study the contractors’ attitude towards enhancing the implementation of safety management system in construction site in order to increase the safety awareness of construction practitioners in construction site and improve the safety condition of construction sites. This study is conducted through oral interviews with the construction practitioners, and visual inspection of construction sites. The attitudes of contractors are evaluated from 3 aspects: Contractors’ efforts in implement and enforce the safety rules, Contractors efforts in overcoming the rate of accidents, and Reasons given by the contractors for not implement safety law.

Studying the Safety Impact of Autonomous Vehicles Using Simulation-Based Surrogate Safety Measures

OpenAIRE

Morando, Mark Mario; Tian, Qingyun; Truong, Long T.; Vu, Hai L.

2018-01-01

Autonomous vehicle (AV) technology has advanced rapidly in recent years with some automated features already available in vehicles on the market. AVs are expected to reduce traffic crashes as the majority of crashes are related to driver errors, fatigue, alcohol, or drugs. However, very little research has been conducted to estimate the safety impact of AVs. This paper aims to investigate the safety impacts of AVs using a simulation-based surrogate safety measure approach. To this end, safety...

Nuclear energy generation and the safety criteria for Brazilian power plants

International Nuclear Information System (INIS)

Silva, Gustavo Brandão e

2016-01-01

The purpose of this paper is to show how the use of nuclear technology can help to diversify the national electricity matrix in a sustainable and efficient way. For this, an analysis of the current situation of the Brazilian electric sector will be made, exposing its fragilities and highlighting the advantages of the nuclear source as an alternative to integrate the necessary thermoelectric base to the reliable supply of electricity in the country. In addition, the objective of the work is to detail the process of exploiting atomic energy in Brazil from raw material mining, through the stages involving the manufacture of nuclear fuel, to the current operation and situation of Brazilian power plants. By taking the Angra 2 Nuclear Power Plant as a case study, the safety criteria adopted in its design and operation will be highlighted. Particular attention will also be given to the electric supply alternatives and to the active safety systems of the plant

A Practical Scheme to Quantify Safety Benefits of Disaster Robots

International Nuclear Information System (INIS)

Choi, Young; Jeong, Kyungmin; Kim, Inn Seock

2016-01-01

The nuclear robotics team of KAERI is also endeavoring to construct disaster robots, and first of all, interested in how much safety benefits the disaster robots will bring about. The nuclear robotics team of Korea Atomic Energy Research Institute (KAERI) has long been involved in robot development for a variety of applications such as emergency refueling manipulation at a pressurized heavy water reactor and decommissioning of nuclear power plants. In light of great advances these days in remote response technology and the need to upgrade the coping capabilities of the nuclear power plants against beyond-design-basis external events, a primary focus is placed on developing disaster robots that can be deployed to the field where a disastrous or potentially disastrous event is happening. Where a decision has to be made to select a robotic mitigating measure out of several alternatives, the approach also may be applied in evaluating the safety benefit for each alternative so that the result can be used in the selection process together with other decision factors. As part of the fundamental research in the robotics development program of KAERI, a new approach to quantify the safety benefits associated with the mitigation actions to be implemented by disaster robots in the case of an extreme nuclear accident has been developed. This approach is based on a PRA model, and seismic-induced station blackout condition was used as the target scenario. Where a decision has to be made to select a robotic mitigating measure out of several alternatives, the approach also may be applied in evaluating the safety benefit for each alternative so that the result can be used in the selection process along with other decision factors (e.g., development costs, technical feasibility). Although only the action of starting and aligning the SBO diesel generator was used as a mitigating measure that might be performed by the disaster robots in this study, they could also be used for many

A Practical Scheme to Quantify Safety Benefits of Disaster Robots

Energy Technology Data Exchange (ETDEWEB)

Choi, Young; Jeong, Kyungmin [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Kim, Inn Seock [ISSA Technology, Germantown (United States)

2016-10-15

The nuclear robotics team of KAERI is also endeavoring to construct disaster robots, and first of all, interested in how much safety benefits the disaster robots will bring about. The nuclear robotics team of Korea Atomic Energy Research Institute (KAERI) has long been involved in robot development for a variety of applications such as emergency refueling manipulation at a pressurized heavy water reactor and decommissioning of nuclear power plants. In light of great advances these days in remote response technology and the need to upgrade the coping capabilities of the nuclear power plants against beyond-design-basis external events, a primary focus is placed on developing disaster robots that can be deployed to the field where a disastrous or potentially disastrous event is happening. Where a decision has to be made to select a robotic mitigating measure out of several alternatives, the approach also may be applied in evaluating the safety benefit for each alternative so that the result can be used in the selection process together with other decision factors. As part of the fundamental research in the robotics development program of KAERI, a new approach to quantify the safety benefits associated with the mitigation actions to be implemented by disaster robots in the case of an extreme nuclear accident has been developed. This approach is based on a PRA model, and seismic-induced station blackout condition was used as the target scenario. Where a decision has to be made to select a robotic mitigating measure out of several alternatives, the approach also may be applied in evaluating the safety benefit for each alternative so that the result can be used in the selection process along with other decision factors (e.g., development costs, technical feasibility). Although only the action of starting and aligning the SBO diesel generator was used as a mitigating measure that might be performed by the disaster robots in this study, they could also be used for many

77 FR 75633 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2012-12-21

... (Closed). 8:00 a.m.-5:00 p.m., February 22, 2013 (Closed). Place: Embassy Suites, 1900 Diagonal Road... conduct of Study Section business and for the study section to consider safety and occupational health...

Sociological refigurations of patient safety; ontologies of improvement and 'acting with' quality collaboratives in healthcare.

Science.gov (United States)

Zuiderent-Jerak, Teun; Strating, Mathilde; Nieboer, Anna; Bal, Roland

2009-12-01

The increasing focus on patient safety in the field of health policy is accompanied by research programs that articulate the role of the social sciences as one of contributing to enhancing safety in healthcare. Through these programs, new approaches to studying safety are facing a narrow definition of 'usefulness' in which researchers are to discover the factors that support or hamper the implementation of existing policy agendas. This is unfortunate since such claims for useful involvement in predefined policy agendas may undo one of the strongest assets of good social science research: the capacity to complexify the taken-for-granted conceptualizations of the object of study. As an alternative to this definition of 'usefulness', this article proposes a focus on multiple ontologies in the making when studying patient safety. Through such a focus, the role of social scientists becomes the involvement in refiguring the problem space of patient safety, the relations between research subjects and objects, and the existing policy agendas. This role gives medical sociologists the opportunity to focus on the question of which practices of 'effective care' are being enacted through different approaches for dealing with patient safety and what their consequences are for the care practices under study. In order to explore these questions, this article draws on empirical material from an ongoing evaluation of a large quality improvement collaborative for the care sectors in the Netherlands. It addresses how issues like 'effectiveness' and 'client participation' are at present articulated in this collaborative and shows that alternative figurations of these notions dissolve many 'implementation problems' presently experienced. Further it analyzes how such a focus of medical sociology on multiple ontologies engenders new potential for exploring particular spaces for 'acting with' quality improvement agents.

Why is patient safety so hard? A selective review of ethnographic studies.

Science.gov (United States)

Dixon-Woods, Mary

2010-01-01

Ethnographic studies are valuable in studying patient safety. This is a narrative review of four reports of ethnographic studies of patient safety in UK hospitals conducted as part of the Patient Safety Research Programme. Three of these studies were undertaken in operating theatres and one in an A&E Department. The studies found that hospitals were rarely geared towards ensuring perfect performances. The coordination and mobilization of the large number of inter-dependent processes and resources needed to support the achievement of tasks was rarely optimal. This produced significant strain that staff learned to tolerate by developing various compensatory strategies. Teamwork and inter-professional communication did not always function sufficiently well to ensure that basic procedural information was shared or that the required sequence of events was planned. Staff did not always do the right things, for a wide range of different reasons, including contestations about what counted as the right thing. Structures of authority and accountability were not always clear or well-functioning. Patient safety incidents were usually not reported, though there were many different reasons for this. It can be concluded that securing patient safety is hard. There are multiple interacting influences on safety, and solutions need to be based on a sound understanding of the nature of the problems and which approaches are likely to be best suited to resolving them. Some solutions that appear attractive and straightforward are likely to founder. Addressing safety problems requires acknowledgement that patient safety is not simply a technical issue, but a site of organizational and professional politics.

Advances made in French safety studies on pressurized water reactors

International Nuclear Information System (INIS)

Pelce, J.

1979-01-01

The programme of French safety studies on reactors is supposed to be known in its main outlines. A few recent results, obtained in different fields are presented. They concern the safety margins evaluation, the contamination transfer and the effect of external aggressions

Evaluation of SKB/Posiva's report on the horizontal alternative of the KBS-3 method

International Nuclear Information System (INIS)

Apted, Michael J.; Bennet, David G.; Saario, Timtetr; Savage, David

2009-10-01

The KBS-3 method, based on multiple barriers, is the proposed spent fuel disposal method both in Sweden and Finland. The method has two design alternatives: the vertical (KBS-3V) and the horizontal (KBS-3H). In the KBS-3H concept, copper canisters loaded with spen nuclear fuel are encased in a compacted bentonite buffer with an outer supporting supercontainer composed of a mild steel basket, and the entire supercontainer is emplaced horizontally in long emplacement drifts. SKB and Posiva have conducted a joint research, development and demonstration (RDandD) programme in 2002-2007 with the overall aim of establishing whether the KBS-3H represents a feasible alternative to the reference alternative KBS-3V. The objectives have been to demonstrate that the horizontal deposition alternative is technically feasible and that it fulfils the same long-term safety requirement as the KBS-3V. Swedish Radiation Safety Authority (SSM) considers that it is a proper time to evaluate the work carried by SKB and Posiva when this period of joint research is ended and a relatively complete set of reporting is available. SSM therefore required its external expert group BRITE (the Barrier Review, Integration, Tracking and Evaluation) to evaluate the reporting. The aims of the evaluation are to investigate the differences between the horizontal and vertical design alternatives with respect to: Completeness: has SKB/Posiva identified the full set of key topics, and if not, what additional specific key topics should be evaluated; Depth-of-treatment: has SKB/Posiva analysed the key topics in sufficient depth, and if not, on what specific aspects in more detailed consideration required; Status of information: has SKB/ Posiva provided enough information on the current status of knowledge and uncertainties that impact the understanding of each key topic, and if not, what further information should be cited; Feasibility and practicality: for key issues related to the fabrication and

LABORATORY DESIGN CONSIDERATIONS FOR SAFETY.

Science.gov (United States)

National Safety Council, Chicago, IL. Campus Safety Association.

THIS SET OF CONSIDERATIONS HAS BEEN PREPARED TO PROVIDE PERSONS WORKING ON THE DESIGN OF NEW OR REMODELED LABORATORY FACILITIES WITH A SUITABLE REFERENCE GUIDE TO DESIGN SAFETY. THERE IS NO DISTINCTION BETWEEN TYPES OF LABORATORY AND THE EMPHASIS IS ON GIVING GUIDES AND ALTERNATIVES RATHER THAN DETAILED SPECIFICATIONS. AREAS COVERED INCLUDE--(1)…

Safety design study of fast breeder reactors in Japan

International Nuclear Information System (INIS)

Miura, M.; Inagaki, T.

1992-01-01

This paper reports on two fast breeder reactor (FBR) concepts, the tank type and the loop type, that have been studied as possible reactor designs to be used for a demonstration FBR (DFBR). The basic principle fo the DFBR design is to ensure plant safety through a defense-in-depth methodology. Improvements in the seismic and thermal stress designs have been attempted for both reactor concepts. The system design study strives to maximize the reliability of the safety-related systems and to rationalize commercialization of the plant

Use of complementary and alternative medicines during the third trimester.

Science.gov (United States)

Pallivalapila, Abdul Rouf; Stewart, Derek; Shetty, Ashalatha; Pande, Binita; Singh, Rajvir; McLay, James S

2015-01-01

To estimate the prevalence, indications, and associated factors for complementary and alternative medicine use during the last trimester of pregnancy. A questionnaire survey was conducted of women with a live birth (N=700) admitted to the postnatal unit at the Royal Aberdeen Maternity Hospital, northeast Scotland. Outcome measures included: complementary and alternative medicine used; vitamins and minerals used; reasons for complementary and alternative medicine use; independent associated factors for use; views; and experiences. Descriptive and inferential statistical analysis was performed. The response rate was 79.6% of eligible women. Two thirds of respondents (61.4%) reported using complementary and alternative medicine, excluding vitamins and minerals, during the third trimester. Respondents reported using a total of 30 different complementary and alternative medicine modalities, of which oral herbal products were the most common (38% of respondents, 40 different products). The independent associated factors for complementary and alternative medicine use identified were: complementary and alternative medicine use before pregnancy (odds ratio [OR] 4.36, 95% confidence interval [CI] 2.39-7.95, Palternative medicine use by family or friends (OR 2.36, 95% CI 1.61-3.47, Palternative medicines were safer than prescribed medicines (P=.006), less likely to be associated with side effects (P≤.001), and could interfere with conventional medicines (P≤.001). Despite the majority of respondents, and notably users, being uncertain about their safety and effectiveness, complementary and alternative medicine modalities and complementary and alternative medicine products are widely used during the third trimester of pregnancy in this study population. Although prior use was the most significant independent associated factor, the role of family and friends, rather than health professionals, in the decision to use complementary and alternative medicine may be of concern

Study on safety subsidiary objective of nuclear power plant in USA

International Nuclear Information System (INIS)

Chen Yan; Zhang Chunming; Fu Zhiwei; Song Wei; Li Chaojun; Wang Zhe; Zuo Jiaxu

2013-01-01

This paper reviewed the development of the quantitative safety objective and subsidiary objective in USA. The expressions of CDF and LERF were obtained according to NUREG-1150. The relationship between the subsidiary objective and the quantitative safety objective was derived. The method was compared with that used in NUREG-1860. The requirements of safety objective for the future nuclear power plant and the development of probabilistic safety analysis (PSA) technology in USA were studied and can be used as reference in China. (authors)

Autoignition Studies of Diesel Alternative Biofuels

Science.gov (United States)

Wang, Weijing

The autoignition of biofuel compounds that offer potential as diesel fuel alternatives was studied under high-pressure engine-like conditions using the shock tube technique. Ignition delay times were determined in reflected shock experiments using measured pressure and electronically-excited OH emission. Measurements were made at conditions ranging from 650 to 1350 K, pressures from 6 to 50 atm, and for fuel/air/diluent mixtures at equivalence ratios from 0.5 to 2. The wide range of temperatures examined provides observation of autoignition in three reactivity regimes, including the negative temperature coefficient (NTC) regime which is characteristic of fuels containing alkyl functionalities. Compounds studied include biodiesel-related compounds and real biodiesel fuels, dimethyl ether, and 3-methylheptane which is representative of compounds found in synthetic diesel fuels produced using the Fischer-Tropsch and hydrotreatment processes. Biodiesel compounds studied include biodiesel surrogates, methyl decanoate, methyl-5-decenoate, and methyl-9-decenoate; compounds found in large quantities in biodiesels, methyl palmitate, methyl stearate, methyl oleate, and methyl linoleate; and soy-based and animal fat based methyl ester biodiesels. Comparison of biodiesel compounds illustrates the influence of molecular structure (e.g., chain length, double bonds, and ester functionality) on reactivity. For methyl decanoate, the effect of high pressure exhaust gas recirculation (EGR) conditions relevant to internal combustion engines was also determined. Results showed that the first-order influence of EGR by displacing fuel and O2 to decrease radical branching. Measurements were compared to kinetic modeling results from models available in the literature providing varying degrees of model validation. Reaction flux analyses were also carried out to further examine the kinetic differences in different temperature regimes for fuel compounds. For example, reaction flux analyses

Patient safety challenges in a case study hospital--of relevance for transfusion processes?

Science.gov (United States)

Aase, Karina; Høyland, Sindre; Olsen, Espen; Wiig, Siri; Nilsen, Stein Tore

2008-10-01

The paper reports results from a research project with the objective of studying patient safety, and relates the finding to safety issues within transfusion medicine. The background is an increased focus on undesired events related to diagnosis, medication, and patient treatment in general in the healthcare sector. The study is designed as a case study within a regional Norwegian hospital conducting specialised health care services. The study includes multiple methods such as interviews, document analysis, analysis of error reports, and a questionnaire survey. Results show that the challenges for improved patient safety, based on employees' perceptions, are hospital management support, reporting of accidents/incidents, and collaboration across hospital units. Several of these generic safety challenges are also found to be of relevance for a hospital's transfusion service. Positive patient safety factors are identified as teamwork within hospital units, a non-punitive response to errors, and unit manager's actions promoting safety.

Safety assessment for a KBS-3H spent nuclear fuel repository at Olkiluoto. Complementary evaluations of safety

Energy Technology Data Exchange (ETDEWEB)

Neall, Fiona; Pastina, Barbara; Snellman, Margit; Smith, Paul; Gribi, P.; Johnson, Lawrence

2008-12-15

The KBS-3H design is a variant of the more general KBS-3 method for the geological disposal of spent nuclear fuel in Finland and Sweden. In the KBS-3H design, multiple assemblies containing spent fuel are emplaced horizontally in parallel, approximately 300 m long, slightly inclined deposition drifts. The copper canisters, each with a surrounding layer of bentonite clay, are placed in perforated steel shells prior to deposition in the drifts; the assembly is called the 'supercontainer'. The other KBS-3 variant is the KBS-3V design, in which the copper canisters are emplaced vertically in individual deposition holes surrounded by bentonite clay but without steel supercontainer shells. SKB and Posiva have conducted a Research, Development and Demonstration programme over the period 2002-2007 with the overall aim of establishing whether KBS-3H represents a feasible alternative to KBS-3V. As part of this programme, the long-term safety of a KBS-3H repository has been assessed in the KBS-3H safety studies. In order to focus the safety studies, the Olkiluoto site in the municipality of Eurajoki, which is the proposed site for a spent fuel repository in Finland, was used as a hypothetical site for a KBS-3H repository. The present report is part of a portfolio of reports discussing the long-term safety of the KBS-3H repository. The overall outcome of the KBS-3H safety studies is documented in the summary report, 'Safety assessment for a KBS-3H repository for spent nuclear fuel at Olkiluoto'. The purpose and scope of the KBS-3H complementary evaluations of safety report is provided in Posiva's Safety Case Plan, which is based on Regulatory Guide YVL 8.4 and on international guidelines on complementary lines of argument to long-term safety that are considered an important element of a post-closure safety case for geological repositories. Complementary evaluations of safety require the use of evaluations, evidence and qualitative supporting arguments

The reactor safety study of experimental multi-purpose VHTR design

International Nuclear Information System (INIS)

Yasuno, T.; Mitake, S.; Ezaki, M.; Suzuki, K.

1981-01-01

Over the past years, the design works of the Experimental Very High Temperature Reactor (VHTR) plant have been conducted at Japan Atomic Energy Research Institute. The conceptual design has been completed and the more detailed design works and the safety analysis of the experimental VHTR plant are continued. The purposes of design studies are to show the feasibility of the experimental VHTR program, to specify the characteristics and functions of the plant components, to point out the R and D items necessary for the experimental VHTR plant construction, and to analyze the feature of the plant safety. In this paper the summary of system design and safety features of the experimental reactor are indicated. Main issues are the safety philosophy for the design basis accident, the accidents assumed and the engineered safety systems adopted in the design works

An integrated framework for cost- benefit analysis in road safety projects using AHP method

Directory of Open Access Journals (Sweden)

Mahsa Mohamadian

2011-10-01

Full Text Available Cost benefit analysis (CBA is a useful tool for investment decision-making from economic point of view. When the decision involves conflicting goals, the multi-attribute analysis approach is more capable; because there are some social and environmental criteria that cannot be valued or monetized by cost benefit analysis. The complex nature of decision-making in road safety normally makes it difficult to reach a single alternative solution that can satisfy all decision-making problems. Generally, the application of multi-attribute analysis in road sector is promising; however, the applications are in preliminary stage. Some multi-attribute analysis techniques, such as analytic hierarchy process (AHP have been widely used in practice. This paper presents an integrated framework with CBA and AHP methods to select proper alternative in road safety projects. The proposed model of this paper is implemented for a case study of improving a road to reduce the accidents in Iran. The framework is used as an aid to cost benefit tool in road safety projects.

Final cost reduction study for the Geysers Recharge Alternative. Volume 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-11-01

The purpose of this study is to determine whether or not cost reduction opportunities exist for the Geysers Recharge Alternative as defined in the Santa Rosa Subregional Long-Term Wastewater Project EIR/EIS. The City of Santa Rosa has been directed to have a plan for reclaimed water disposal in place by 1999 which will meet future capacity needs under all weather conditions. A Draft EIR/EIS released in July 1996 and a Final EIR certified in June 1997 examine four primary alternatives plus the No Action Alternative. Two of the primary alternatives involve agricultural irrigation with reclaimed water, either in western or southern Sonoma County. Another involves increased discharge of reclaimed water into the Russian River. The fourth involves using reclaimed water to replenish the geothermal reservoir at the Geysers. The addition of this water source would enable the Geysers operators to produce more steam from the geothermal area and thereby prolong the life and economic production level of the steamfield and the geothermal power plants supplied by the steamfield. This study provides additional refined cost estimates for new scenarios which utilize an alternative pipeline alignment and a range of reclaimed water flows, which deliver less water to the Geysers than proposed in the EIR/EIS (by distributing flow to other project components). Also, electrical power rates were revised to reflect the recent changes in costs associated with deregulation of the power industry. In addition, this report provides information on sources of potential public and private funding available and future environmental documentation required if the cost reduction scenarios were to be selected by the City as part of their preferred alternative.

B cell remote-handled waste shipment cask alternatives study

International Nuclear Information System (INIS)

RIDDELLE, J.G.

1999-01-01

The decommissioning of the 324 Facility B Cell includes the onsite transport of grouted remote-handled radioactive waste from the 324 Facility to the 200 Areas for disposal. The grouted waste has been transported in the leased ATG Nuclear Services 3-82B Radioactive Waste Shipping Cask (3-82B cask). Because the 3-82B cask is a U.S. Nuclear Regulatory Commission (NRC)-certified Type B shipping cask, the lease cost is high, and the cask operations in the onsite environment may not be optimal. An alternatives study has been performed to develop cost and schedule information on alternative waste transportation systems to assist in determining which system should be used in the future. Five alternatives were identified for evaluation. These included continued lease of the 3-82B cask, fabrication of a new 3-82B cask, development and fabrication of an onsite cask, modification of the existing U.S. Department of Energy-owned cask (OH-142), and the lease of a different commercially available cask. Each alternative was compared to acceptance criteria for use in the B Cell as an initial screening. Only continued leasing of the 3-82B cask, fabrication of a new 3-82B cask, and the development and fabrication of an onsite cask were found to meet all of the B Cell acceptance criteria

A study of RFID application impacts on medical safety.

Science.gov (United States)

Chang, She-I; Ou, Chin-Shyh; Ku, Cheng-Yuan; Yang, Morris

2008-01-01

With the international reform in medical management systems gaining ground worldwide, hospital management has gradually begun to shift its focus from providing expensive medical treatment to improving medical service quality and patient safety. In this study, we discuss the application of Radio Frequency Identification (RFID) and data integrating technology with the medical service, and examine whether or not this technology can enhance medical safety. We also discuss the possible benefits following the application of the RFID system. The findings show that the application of RFID to hospitals can actually generate benefits, which can be further divided into operational structure benefits, users' structure benefits, and organisational and environmental benefits. However, not all these benefits can achieve medical safety. Among them, only the operator and environmental benefits can play such roles. Nevertheless, the application of RFID can bring hospitals towards the integration of technology benefits and improved medical safety.

Bus safety study : a report to Congress.

Science.gov (United States)

2013-11-01

Section 20021(b) of the Moving Ahead for Progress for the 21st Century (MAP-21) legislation requires the Secretary of Transportation : to submit a report of the results of a Bus Safety Study to the Committee on Banking, Housing, and Urban Affai...

Presumption of Innocence and Public Safety: A Possible Dialogue

Directory of Open Access Journals (Sweden)

Ana Aguilar-Garcia

2014-12-01

Full Text Available In Mexico, increasing demands for public safety coupled with the need for a more effective criminal justice system resulted in the security and justice constitutional reform of 2008. The outcome was a constitutional framework with provisions based on the highest standards of human rights on the one hand, and on the other, exceptional measures that restrict rights in an attempt to improve public safety. Unfortunately, the crime rate and incidence of unreported crime have changed little. When public safety is demanded, a clear, rational and concrete response is required. Limiting the alternatives to pre-trial detention or increasing penalties is rarely the appropriate response. This paper focuses on pre-trial detention and non-custodial measures supported by the new criminal justice system, how they relate to the principle of the presumption of innocence and the tension between this and the punitive demands for increased imprisonment. In addition, this study discusses a technical solution, found in pre-trial services, which seeks to balance the presumption of innocence and the right to personal liberty with public safety.

Safety in the ARIES Tokamak Design Study

International Nuclear Information System (INIS)

Herring, J.S.; Wong, C.P.-C.; Cheng, E.T.; Grotz, S.

1989-01-01

Safety is one of the primary goals of the ARIES Tokamak Design Study. Public safety goals are the achievement passive safety which is demonstrable in tests that could precede operation and the assurance that releases from accidents be passively limited such that no evacuation plan in necessary. Strategies for safety of the plant investment are factory fabrication, short construction times and a design such that no off-normal operational transient results in damage which could not be repaired in routine maintenance. ARIES-I, the first of three 'visions' of potential tokamak reactors, will use He at 5 MPa as a blanket coolant and SiC/composite ceramic for the first wall and blanket materials. Both the coolant and the structural material were chosen for their low activation, both in the short term after accidents and for long term waste management. The breeder, Li 4 SiO 4 , was also chosen for low activation. Contemporary plasma physics and aggressive technology are used in ARIES-I, which results in very high toroidal fields (24 T maximum at the coil). The stored TF energy will be about 130 GJ. A central concern is the safe discharge of this stored energy under electrical fault conditions and prevention of a failure in the magnet set from propagating into systems containing radioactive inventories. The TF coil system consists of 16 coils, each containing two separate windings powered by two independent power supplies. Arcs and shorts between the two power supply systems and across individual windings have been modeled. In addition, delay or failure in circuit breaker opening has been modeled. The safety impacts of LOCA, LOFA and disruptive events have also been evaluated. 8 refs., 4 figs., 7 tabs

77 FR 43090 - Safety and Occupational Health Study Section: Notice of Charter Renewal

Science.gov (United States)

2012-07-23

... Committee Act (Pub. L. 92-463) of October 6, 1972, that the Safety and Occupational Health Study Section... Secretary, Safety and Occupational Health Study Section, Department of Health and Human Services, 1600... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Safety and...

75 FR 42455 - Safety and Occupational Health Study Section: Notice of Charter Renewal

Science.gov (United States)

2010-07-21

... Committee Act (Pub. L. 92-463) of October 6, 1972, that the Safety and Occupational Health Study Section... Secretary, Safety and Occupational Health Study Section, Department of Health and Human Services, 1600... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Safety and...

Canister transfer into repository in shaft alternative

International Nuclear Information System (INIS)

Raiko, H.; Kukkola, T.; Autio, J.

2005-09-01

In this report, a study of lift transportation of a massive canister for spent nuclear fuel is considered. The canister is transferred from ground level to repository, which lies in the depth of 400 to 500 m in the bedrock. The canister is a massive metal vessel, whose weight is 19 to 29 tons, and which is strongly irradiant (gamma and neutrons), and which contains 1.4 to 2.2 tons of very strongly radio-active material, the activity of the fuel should not be spread in the environment even during postulated accidents. The study observes that the lift alternative is possible to be built and through good design practices and good maintenance procedures its safety, reliability and usability can be kept on such high level that canister transport is estimated to be licensable. (orig.)

EPR safety. Consideration of the internal and external hazards in the safety studies

International Nuclear Information System (INIS)

Gueguin, H.

2008-04-01

The author presents the main points of the Preliminary Safety Report of EDF on the EPR reactor safety. It concerns the considerations of the internal (fire, flood, explosions, pipes failures) and external (earthquakes, airplane falls, explosions, exceptional natural disasters, extreme meteorological conditions) damages. It presents how the safety report takes into account the aggression. (A.L.B.)

Technology, safety and costs of decommissioning a reference boiling water reactor power station. Appendices. Volume 2

Energy Technology Data Exchange (ETDEWEB)

Oak, H.D.; Holter, G.M.; Kennedy, W.E. Jr.; Konzek, G.J.

1980-06-01

Appendices are presented concerning the evaluations of decommissioning financing alternatives; reference site description; reference BWR facility description; radiation dose rate and concrete surface contamination data; radionuclide inventories; public radiation dose models and calculated maximum annual doses; decommissioning methods; generic decommissioning information; immediate dismantlement details; passive safe storage, continuing care, and deferred dismantlement details; entombment details; demolition and site restoration details; cost estimating bases; public radiological safety assessment details; and details of alternate study bases.

Fire safety study of Dodewaard and Borssele nuclear power plants

International Nuclear Information System (INIS)

1988-03-01

From the nuclear and conventional fire safety audits of both Dutch nuclear power plants performed under supervision of the Nuclear Safety Inspectorate and the Inspectorate for the Fire Services it turns out that the fire safety is sufficient however amenable for improvement. Besides a detailed description of the method of examination, the study 'Fire Safety' contains the results of the audit and 14 respectively 15 recommendations for improvement of the fire safety in Dodewaard and Borssele. The suggested recommendations which are applicable to both power plants are the following: fire fighting training for operators and guards, a complete emergency ventilation system of the control room, increase in the number of detectors and alarms, an increase in the quantity of water available for high-pressure fire fighting, improvement of fire barriers between several redundancies of nuclear safety systems, an investigation and possible improvement of the heat and radiation protection offered by presently used fire fighting suits. For Dodewaard a closed emergency staircase in the reactor building (secondary containment) is deemed necessary for personnel emergency escape routes and continued fire fighting if required

78 FR 24751 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2013-04-26

... 14, 2013 (Closed) Place: Embassy Suites, 1900 Diagonal Road, Alexandria, Virginia 22314, Telephone... business and for the study section to consider safety and occupational health-related grant applications...

Simulation study of coal mine safety investment based on system dynamics

Institute of Scientific and Technical Information of China (English)

Tong Lei; Dou Yuanyuan

2014-01-01

To generate dynamic planning for coal mine safety investment, this study applies system dynamics to decision-making, classifying safety investments by accident type. It validates the relationship between safety investments and accident cost, by structurally analyzing the causality between safety investments and their influence factors. Our simulation model, based on Vensim software, conducts simulation anal-ysis on a series of actual data from a coalmine in Shanxi Province. Our results indicate a lag phase in safety investments, and that increasing pre-phase safety investment reduces accident costs. We found that a 24%increase in initial safety investment could help reach the target accident costs level 14 months earlier. Our simulation test included nine kinds of variation trends of accident costs brought by different investment ratios on accident prevention. We found an optimized ratio of accident prevention invest-ments allowing a mine to reach accident cost goals 4 months earlier, without changing its total investment.

Alternate superior Julia sets

International Nuclear Information System (INIS)

Yadav, Anju; Rani, Mamta

2015-01-01

Alternate Julia sets have been studied in Picard iterative procedures. The purpose of this paper is to study the quadratic and cubic maps using superior iterates to obtain Julia sets with different alternate structures. Analytically, graphically and computationally it has been shown that alternate superior Julia sets can be connected, disconnected and totally disconnected, and also fattier than the corresponding alternate Julia sets. A few examples have been studied by applying different type of alternate structures

Evaluation of alternatives for the disposition of surplus weapons-usable plutonium

International Nuclear Information System (INIS)

Dyer, J.S.; Butler, J.C.; Edmunds, T.

1997-01-01

The Department of Energy Record of Decision (ROD) selected alternatives for disposition of surplus, weapons grade plutonium. A major objective of this decision was to prevent the proliferation of nuclear weapons. Other concerns addressed included economic, technical, institutional, schedule, environmental, and health and safety issues. The analysis reported here was conducted in parallel with technical, environmental, and nonproliferation analyses; it uses multiattribute utility theory to combine these considerations in order to facilitate an integrated evaluation of alternatives. This analysis is intended to provide additional insight regarding alternative evaluation and to assist in understanding the rationale for the choice of alternatives recommended in the ROD. Value functions were developed for objectives of disposition, and used to rank alternatives. Sensitivity analyses indicated that the ranking of alternatives for the base case was relatively insensitive to changes in assumptions over reasonable ranges. The analyses support the recommendation of the ROD to pursue parallel development of the vitrification immobilization alternative and the use of existing light water reactors alternative. 27 refs., 109 figs., 20 tabs

Pilot Study on Harmonisation of Reactor Safety in WENRA Countries

International Nuclear Information System (INIS)

2003-03-01

Most of the objectives, set for the Pilot Study, were met. It can be concluded that the methodology was adequate for its purpose. National requirements on selected safety issues have been systematically compared and the major gaps and differences have been identified. Convenient overviews have been provided of differences and similarities between the countries. Furthermore, the conclusions are based on a safety justification and are detailed enough to provide input to a further more detailed analysis on the national level. It was not possible, however, to provide fully verified conclusions about the implementation of the reference levels in the different countries. This has to do with the following constraints on the study: In line with the Terms of Reference, the comparison of formal requirements did not address the more detailed use of criteria and methods to verify compliance. The same requirement could be enforced differently in different regulatory systems, and hence lead to different implementation. The Pilot Study also assessed the implementation, but it was not possible to do this in sufficient detail to identify such differences. The implementation was assessed on the basis of current knowledge of the respective regulatory body, but it was not possible to provide the panels with evidence of the implementation. For these reasons, conclusions about implemented safety provisions in the different countries should be drawn with precaution. The introduction of the panel assessments greatly improved the quality and consistency of the comparison assessments. Uncertainties in the assessments are mainly connected with lack of time to make a detailed analysis in some cases. The reliability of the assessments seems to be sufficient for the objectives of the Pilot Study. The introduction of the IAEA safety standards in the study proved to be helpful and provided confidence in the scope and strictness of the reference levels. This Pilot Study has contributed to

Clinical Efficacy and Safety of Oral Qing-Dai in Patients with Ulcerative Colitis: A Single-Center Open-Label Prospective Study.

Science.gov (United States)

Sugimoto, Shinya; Naganuma, Makoto; Kiyohara, Hiroki; Arai, Mari; Ono, Keiko; Mori, Kiyoto; Saigusa, Keiichiro; Nanki, Kosaku; Takeshita, Kozue; Takeshita, Tatsuya; Mutaguchi, Makoto; Mizuno, Shinta; Bessho, Rieko; Nakazato, Yoshihiro; Hisamatsu, Tadakazu; Inoue, Nagamu; Ogata, Haruhiko; Iwao, Yasushi; Kanai, Takanori

2016-01-01

Chinese herbal medicine Qing-Dai (also known as indigo naturalis) has been used to treat various inflammatory conditions. However, not much has been studied about the use of oral Qing-Dai in the treatment for ulcerative colitis (UC) patients. Studies exploring alternative treatments for UC are of considerable interest. In this study, we aimed at prospectively evaluating the safety and efficacy of Qing-Dai for UC patients. The open-label, prospective pilot study was conducted at Keio University Hospital. A total of 20 patients with moderate UC activity were enrolled. Oral Qing-Dai in capsule form was taken twice a day (daily dose, 2 g) for 8 weeks. At week 8, the rates of clinical response, clinical remission, and mucosal healing were 72, 33, and 61%, respectively. The clinical and endoscopic scores, CRP levels, and fecal occult blood results were also significantly improved. We observed 2 patients with mild liver dysfunction; 1 patient discontinued due to infectious colitis and 1 patient discontinued due to mild nausea. This is the first prospective study indicating that oral Qing-Dai is effective for inducing remission in patients with moderate UC activity and can be tolerated. Thus, Qing-Dai may be considered an alternative treatment for patients, although further investigation is warranted. © 2016 S. Karger AG, Basel.

Efficacy and safety of thymoglobulin induction as an alternative approach for steroid-free maintenance immunosuppression in pediatric renal transplantation.

Science.gov (United States)

Li, Li; Chaudhuri, Abanti; Chen, Amery; Zhao, Xinmeng; Bezchinsky, Maria; Concepcion, Waldo; Salvatierra, Oscar; Sarwal, Minnie M

2010-12-27

Given the recent withdrawal of daclizumab (DAC), the safety and efficacy of thymoglobulin (TMG) was tested as an alternative induction agent for steroid-free (SF) immunosuppression in pediatric kidney transplant recipients. Thirteen pediatric renal transplant recipients meeting defined high-risk criteria at transplantation were offered TMG induction and SF immunosuppression with maintenance mycophenolate mofetil and tacrolimus between October 2008 and January 2010. Patients were closely monitored at baseline, 3, 6, 9, and 12 months posttransplant for protocol biopsy and clinical outcomes. Outcomes were compared with 13 consecutively transplanted low-risk patients receiving an established DAC-based SF protocol (Sarwal et al., WA, American Transplant Congress 2003). There was a significant trend for overall decrease in the absolute lymphocyte counts in TMG group (F=5.86, mixed model group effect P=0.02), predominately at 3 months compared with DAC group (0.7±0.6 vs. 2.1±1.0, P=0.0004); however, lymphocyte count was recovered and was back to reference range by 6 months in TMG. There was trend toward more subclinical cytomegalovirus (15% vs. 0%) and BK viremia (17% vs. 0%) in the TMG group, with no differences in the incidence of subclinical Epstein Barr virus viremia (23% vs. 31%) or clinical viral disease. Mean graft function was excellent, and with a minimum follow-up of 6 months, there were no episodes of acute rejection. TMG seems to be a safe alternative induction strategy in patients for SF immunosuppression in pediatric renal transplantation. Extended follow-up and greater enrollment are necessary to fully explore the impact of TMG dosing on viral replication posttransplantation.

Final environmental impact statement for the Nevada test site and off-site locations in the State of Nevada. Human health risks and safety impacts study, Volume 1, Appendix H

International Nuclear Information System (INIS)

1996-08-01

Proposed changes in the Nevada Test Site (NTS) operations, as well as the US Department of Energy (DOE) policy of reviewing sitewide National Environmental Policy Act (NEPA) documents, have resulted in the need for the US Department of Energy, Nevada Operations Office (DOE/NV) Operations Office to prepare a new Environmental Impact Statement (EIS) for the NTS. This report has been prepared to assess the human health and safety impacts from operations expected to be carried out under each of the four alternatives defined in the NTS EIS. These alternatives are: Alternative 1, Continue Current Operations (No Action); Alternative 2, Discontinue Operations; Alternative 3, Expanded Use; and Alternative 4, Alternate Use of Withdrawn Lands

on some properties of the alternating sylvester series and alternating

African Journals Online (AJOL)

DJFLEX

. (iii) above is known in literature as the alternating Sylvester series while (iv) is known as the alternating Engel expansion (Kalpazidou and Ganatsiou (1991)). We are interested in studying the properties of these alternating series. Theorem 2: ...

Alternative risk-based criteria for transportation of radioactive materials on the United States Department of Energy Hanford Site

International Nuclear Information System (INIS)

Mercado, J.E.; Field, J.G.; Smith, R.J.; Wang, O.S.

1993-01-01

This paper presents the development of an alternative method to evaluate packaging safety for radioactive material transported solely within the boundaries of a restricted site; the method uses risk-based criteria to assess and document packaging safety. These criteria offer a standard against which the results of a risk assessment are compared to evaluate the safety of a transportation operation. Numerous payloads are transported entirely within the U.S. Department of Energy's Hanford Site boundaries. The U.S. Department of Energy requires that the safety of onsite transportation be equivalent to the safety provided for transporting radioactive materials in commerce as regulated by the U.S. Department of Transportation and the U.S. Nuclear Regulatory Commission. Some onsite packaging configurations do not meet the performance criteria that form the basis of these regulations, necessitating the establishment of alternative criteria to evaluate safety. Quantitatively defined criteria have been derived from the U.S. Department of Transportation limits for package radiation levels, curie content, activity release, and external contamination levels. Recommendations of the International Committee on Radiation Protection may further restrict the criteria. The proposed method documents packaging safety in a transportation risk assessment. The assessment estimates accident frequencies, conservatively evaluates the dose consequences of these accidents, and compares the results to the established risk acceptance criteria. Specific Hanford Site onsite packaging and transportation issues illustrate the alternative method. The paper compares the solutions resulting from the application of risk-based criteria to those resulting from strict compliance with commercial transportation regulations. (author)

Developing a driving Safety Index using a Delphi stated preference experiment.

Science.gov (United States)

Jamson, Samantha; Wardman, Mark; Batley, Richard; Carsten, Oliver

2008-03-01

Whilst empirical evidence is available concerning the effect of some aspects of driving behaviour on safety (e.g. speed choice), there is scant knowledge about safety thresholds, i.e. the point at which behaviour can be considered unsafe. Furthermore, it is almost impossible to ascertain the interaction between various aspects of driving behaviour. For example, how might drivers' lateral control of a vehicle be mediated by their speed choice-are the effects additive or do they cancel each other out. Complex experimental or observational studies would need to be undertaken to establish the nature of such effects. As an alternative, a Delphi study was undertaken to use expert judgement as a way of deriving a first approximation of these threshold and combinatory effects. Using a stated preference technique, road safety professionals make judgements about drivers' safe or unsafe behaviour. The aim was to understand the relative weightings that are assigned to a number of driver behaviours and thereby to construct a Safety Index. As expected, experts were able to establish thresholds, above (or below) which changes to the behavioural parameters had minimal impact on safety. This provided us with a Safety Index, based on a model that had face validity and a convincing range of values. However, the experts found the task of combining these driver behaviours more difficult, reflecting the elusive nature of safety estimates. Suggestions for future validation of our Safety Index are provided.

Technology Overview Using Case Studies of Alternative Landfill Technologies and Associated Regulatory Topics

National Research Council Canada - National Science Library

2003-01-01

... alternative landfill cover projects. The purpose of the case studies is to present examples of the flexibility used in the regulatory framework for approving alternative landfill cover designs, current research information about the use...

Study on operational safety issues in the Japanese disposal concept

International Nuclear Information System (INIS)

Suzuki, Satoru; Kitagawa, Yoshito; Hyodo, Hideaki; Kubota, Shigeru; Iijima, Masayoshi; Tamura, Akio; Ishiguro, Katsuhiko; Fujihara, Hiroshi

2014-01-01

In Japan, vitrified high-level radioactive waste (HLW) and certain types of low-level radioactive waste that results from the reprocessing of spent fuel and classified as TRU waste will be disposed of in deep geological formations. NUMO aims to ensure the safety of local residents and workers during the operational phase and after repository closure and will therefore establish a safety case for the geological disposal programme at the end of each stage of the stepwise siting process. Although the Japanese programme is still in the stage before initiation of the siting process, updating the generic (non-site-specific) safety case is required for building confidence among stakeholders. This study focuses on operational safety issues for the Japanese HLW disposal concept. (authors)

Preliminary study on functional performance of compound type multistage safety injection tank

International Nuclear Information System (INIS)

Bae, Youngmin; Kim, Young In; Kim, Keung Koo

2015-01-01

Highlights: • Functional performance of compound type multistage safety injection tanks is studied. • Effects of key design parameters are scrutinized. • Distinctive flow features in compound type safety injection tanks are explored. - Abstract: A parametric study is carried out to evaluate the functional performance of a compound type multistage safety injection tank that would be considered one of the components for the passive safety injection systems in nuclear power plants. The effects of key design parameters such as the initial volume fraction and charging pressure of gas, tank elevation, vertical location of a sparger, resistance coefficient, and operating condition on the injection flow rate are scrutinized along with a discussion of the relevant flow features. The obtained results indicate that the compound type multistage safety injection tank can effectively control the injection flow rate in a passive manner, by switching the driving force for the safety injection from gas pressure to gravity during the refill and reflood phases, respectively

Tritium safety study using Caisson Assembly (CATS) at TPL/JAEA

International Nuclear Information System (INIS)

Hayashi, T.; Kobayashi, K.; Iwai, Y.; Isobe, K.; Nakamura, H.; Kawamura, Y.; Shu, W.; Suzuki, T.; Yamada, M.; Yamanishi, T.

2008-01-01

Tritium confinement is required as the most important safety Junction for a fusion reactor. In order to demonstrate the confinement performance experimentally, an unique equipment, called CATS: Caisson Assembly for Tritium Safety study, was installed in Tritium Process Laboratory of Japan Atomic Energy Agency and operated for about 10 years. Tritium confinement and migration data in CATS have been accumulated and dynamic simulation code was accumulated using these data. Contamination and decontamination behavior on various materials and new safety equipment functions have been investigated under collaborations with a lot of laboratories and universities. (authors)

Industry requirements for introduction of alternative energies with emphasis on hydrogen fuel cells

Energy Technology Data Exchange (ETDEWEB)

Delabbio, F. [Rio Tinto, Canadian Exploration Ltd., Toronto, ON (Canada); Starbuck, D. [Newmont Mining Corp., Denver, CO (United States); Akerman, A. [CVRD-Inco, Toronto, ON (Canada); Betournay, M.C. [Natural Resources Canada, Ottawa, ON (Canada). CANMET Mining and Mineral Sciences Laboratories

2007-07-01

This paper discussed issues related to the use of alternate sources of energy in underground mining applications. Hydrogen power systems were examined in relation to operational drivers, available commercial supplies, site supplies, health and safety issues, capital and operating costs, mine production, and the role of government. Hydrogen power systems are being considered for mining applications in an effort to reduce greenhouse gas (GHG) emissions and reduce cooling and ventilation requirements. This article examined a range of issues that must be addressed before alternate energy systems such as hydrogen fuel cell technology can be used in larger-scale underground mining applications. The mining industry supports the development of new technologies. However, the introduction of alternate energy technologies must proceed in steps which include proof of concept testing, the development of generic infrastructure, power systems and regulations, and whole operating system studies. 13 refs., 1 fig.

Alternatives to antibiotics: a symposium on the challenges and solutions for animal production.

Science.gov (United States)

Seal, Bruce S; Lillehoj, Hyun S; Donovan, David M; Gay, Cyril G

2013-06-01

Antibiotics are one of the most important medical discoveries of the 20th century and will remain an essential tool for treating animal and human diseases in the 21st century. However, antibiotic resistance among bacterial pathogens and concerns over their extensive use in food animals has garnered global interest in limiting antibiotic use in animal agriculture. Yet, limiting the availability of medical interventions to prevent and control animal diseases on the farm will directly impact global food security and safety as well as animal and human health. Insufficient attention has been given to the scientific breakthroughs and novel technologies that provide alternatives to antibiotics. The objectives of the symposium 'Alternatives to Antibiotics' were to highlight promising research results and novel technologies that could potentially lead to alternatives to conventional antibiotics, and assess challenges associated with their commercialization, and provide actionable strategies to support development of alternative antimicrobials. The symposium focused on the latest scientific breakthroughs and technologies that could provide new options and alternative strategies for preventing and treating diseases of animals. Some of these new technologies have direct applications as medical interventions for human health, but the focus of the symposium was animal production, animal health and food safety during food-animal production. Five subject areas were explored in detail through scientific presentations and expert panel discussions, including: (1) alternatives to antibiotics, lessons from nature; (2) immune modulation approaches to enhance disease resistance and to treat animal diseases; (3) gut microbiome and immune development, health and diseases; (4) alternatives to antibiotics for animal production; and (5) regulatory pathways to enable the licensure of alternatives to antibiotics.

Safety benefits from CANDU reactor replacement - a case study

International Nuclear Information System (INIS)

Mottram, R.; Millard, J.W.F.; Purdy, P.

2011-01-01

Both total core replacement and core retubing have been used in the CANDU industry. For future plant refurbishments, based on experience both in new construction and in recent refurbishments, the concept of total core replacement has been revisited. This builds on practices for replacement of other large plant equipment like boilers. The Bruce CANDU reactors, with their local shield tanks built around the Calandria and containment closely located around that Calandria Shield Tank Assembly (CSTA), are believed to be good candidates for core replacement. A structured process was used to design a replacement CSTA suitable for Bruce A use. The work started with a study of opportunities for safety enhancements in the core. This progressed into design studies and related design assist safety analysis on the reactor. A key element of the work involved consideration of how verified features from later CANDU designs, and from our new reactor design work, could be tailored to fit this replacement core. The replacement reactor core brings in structural improvements in both calandria and end shield, and safety improvements like the natural circulation enhancing moderator cooling layout and further optimized reactivity layouts to improve shutdown system performance. Bruce Power are currently studying the business implications of this and retube techniques as part of preparation for future refurbishments. The work explained in this paper is in the context of the safety related changes and the work to choose and quantify them. (author)

Safety benefits from CANDU reactor replacement. A case study

International Nuclear Information System (INIS)

Mottram, R.; Millard, J.W.F.; Purdy, P.

2011-01-01

Both total core replacement and core retubing have been used in the CANDU industry. For future plant refurbishments, based on experience both in new construction and in recent refurbishments, the concept of total core replacement has been revisited. This builds on practices for replacement of other large plant equipment like boilers. The Bruce CANDU reactors, with their local shield tanks built around the Calandria and containment closely located around that Calandria Shield Tank Assembly (CSTA), are believed to be good candidates for core replacement. A structured process was used to design a replacement CSTA suitable for Bruce A use. The work started with a study of opportunities for safety enhancements in the core. This progressed into design studies and related design assist safety analysis on the reactor. A key element of the work involved consideration of how verified features from later CANDU designs, and from our new reactor design work, could be tailored to fit this replacement core. The replacement reactor core brings in structural improvements in both calandria and end shield, and safety improvements like the natural circulation enhancing moderator cooling layout and further optimized reactivity layouts to improve shutdown system performance. Bruce Power are currently studying the business implications of this and retube techniques as part of preparation for future refurbishments. The work explained in this paper is in the context of the safety related changes and the work to choose and quantify them. (author)

Ferrocyanide safety project ferrocyanide aging studies. Final report

International Nuclear Information System (INIS)

Lilga, M.A.; Hallen, R.T.; Alderson, E.V.

1996-06-01

This final report gives the results of the work conducted by Pacific Northwest National Laboratory (PNNL) from FY 1992 to FY 1996 on the Ferrocyanide Aging Studies, part of the Ferrocyanide Safety Project. The Ferrocyanide Safety Project was initiated as a result of concern raised about the safe storage of ferrocyanide waste intermixed with oxidants, such as nitrate and nitrite salts, in Hanford Site single-shell tanks (SSTs). In the laboratory, such mixtures can be made to undergo uncontrolled or explosive reactions by heating dry reagents to over 200 degrees C. In 1987, an Environmental Impact Statement (EIS), published by the U.S. Department of Energy (DOE), Final Environmental Impact Statement, Disposal of Hanford Defense High-Level Transuranic and Tank Waste, Hanford Site, Richland, Washington, included an environmental impact analysis of potential explosions involving ferrocyanide-nitrate mixtures. The EIS postulated that an explosion could occur during mechanical retrieval of saltcake or sludge from a ferrocyanide waste tank, and concluded that this worst-case accident could create enough energy to release radioactive material to the atmosphere through ventilation openings, exposing persons offsite to a short-term radiation dose of approximately 200 mrem. Later, in a separate study (1990), the General Accounting Office postulated a worst-case accident of one to two orders of magnitude greater than that postulated in the DOE EIS. The uncertainties regarding the safety envelope of the Hanford Site ferrocyanide waste tanks led to the declaration of the Ferrocyanide Unreviewed Safety Question (USQ) in October 1990

Proceedings of the International conference on energy alternatives/risk education V. 2

International Nuclear Information System (INIS)

Marx, Gyoergy

1990-02-01

This Proceedings volume on Energy and Risk within the context of the International Conference on Energy Alternatives/Risk Education contains papers on Nuclear Energy, on Background Radiation and on Risks of Energy Alternatives. 15 papers concerning safety of nuclear reactors, case stories of reactor and radiation accidents, monitoring low-level indoor radiation, educational tods, comparison of energy system risks, and catalyzed fusion were indexed and abstracted separately for the INIS database. (R.P.)

Alternative drives for motor cars. Hybrid systems, fuel cells, alternative energy sources. 3. ed.; Alternative Antriebe fuer Automobile. Hybridsysteme, Brennstoffzellen, alternative Energietraeger

Energy Technology Data Exchange (ETDEWEB)

Stan, Cornel [California Univ., Berkeley, CA (United States); Paris-1 Univ., 75 (France); Pisa Univ. (Italy); Perugia Univ. (Italy); Kronstadt Univ. (Russian Federation)

2012-07-01

This book describes and assesses on the basis of the latest research and development projects worldwide what the possibilities are for the realisation of future drive concepts, ranging from battery-driven electromotors to hybrid systems combining electromotor and combustion engine to alternative energy resources such as hydrogen or alcohol. Power density, torque band, acceleration characteristics, specific energy consumption and chemical and noise emissions are the most important criteria for assessing the quality of a drive configuration. The boundary conditions for the introduction of alternative automotive drives are determined by the availability or production characteristics and the storability of the energy resources in question as well as by the degree of technical complexity, costs, safety, infrastructure and service. This book provides an updated overview and analysis of the processes, prime movers and energy resources that can be combined in complex energy management systems for automobiles. Up-to-date information of this kind is indispensable for the development of new concepts. The contents in overview: current data and facts on the development of new concepts; compact overview and analysis of processes, prime movers and energy resources; methods and solutions in designing alternative drives. [German] Die Realisierungsmoeglichkeiten zukuenftiger Antriebskonzepte - von batteriebetriebenen Elektromotoren und Hybridsystemen bestehend aus Elektro- und Verbrennungsmotor ueber Brennstoffzellen bis hin zu alternativen Energietraegern wie Wasserstoff oder Alkohol - werden auf Basis neuesten Forschungs- und Entwicklungsarbeiten weltweit praesentiert und bewertet. Leistungsdichte, Drehmomentverlauf, Beschleunigungscharakteristik, spezifischer Energieverbrauch sowie Emission chemischer Stoffe und Geraeusche sind wichtige Merkmale zur Beurteilung der Qualitaet einer Antriebskonfiguration. Die Verfuegbarkeit oder die Herstellungsmerkmale sowie die Speicherfaehigkeit

Calculational study for criticality safety data of fissionable actinides

International Nuclear Information System (INIS)

Nojiri, Ichiro; Fukasaku, Yasuhiro.

1997-01-01

This study has been carried out to obtain basic criticality safety characteristics of minor actinides nuclides. Criticality safety data of minor actinides nuclides have been surveyed through public literatures. Critical mass of seven nuclides, Np-237, Am-241, Am-242m, Am-243, Cm-243, Cm-244 and Cm-245, have been calculated by using two code systems of criticality safety analysis, SCALE-4 and MCNP4A, under some material and reflector conditions. Some applicable cross-section libraries have been used for each code systems. Calculated data have been compared with each other and with published data. The results of this comparison shows that there is no discrepancy within the computational codes and the calculated data is strongly depend on the cross-section library. (author)

Refuge alternatives relief valve testing and design with updated test stand.

Science.gov (United States)

Lutz, T J; Bissert, P T; Homce, G T; Yonkey, J A

2018-03-01

Underground refuge alternatives require an air source to supply breathable air to the occupants. This requires pressure relief valves to prevent unsafe pressures from building up within the refuge alternative. The U.S. Mine Safety and Health Administration (MSHA) mandates that pressure relief valves prevent pressure from exceeding 1.25 kPa (0.18 psi), or as specified by the manufacturer, above mine atmospheric pressure when a fan or compressor is used for the air supply. The U.S. National Institute for Occupational Safety and Health (NIOSH) tested a variety of pressure relief valves using an instrumented test fixture consisting of data acquisition equipment, a centrifugal blower, ductwork and various sensors to determine if the subject pressure relief valves meet the MSHA requirement. Relief pressures and flow characteristics, including opening pressure and flow rate, were measured for five different pressure relief valves under a variety of conditions. The subject pressure relief valves included two off-the-shelf modified check valves, two check valves used in MSHA-approved built-in-place refuge alternatives, and a commercially available valve that was designed for a steel refuge alternative and is currently being used in some built-in-place refuge alternatives. The test results showed relief pressures ranging from 0.20 to 1.53 kPa (0.03 to 0.22 psi) and flow rates up to 19.3 m 3 /min (683 scfm). As tested, some of the pressure relief valves did not meet the 1.25 kPa (0.18 psi) relief specification.

Biosphere analysis for selected cases in TILA-99 and in KBS-3H safety evaluation 2007

International Nuclear Information System (INIS)

Broed, R.; Avila, R.; Bergstroem, U.; Hjerpe, T.; Ikonen, A.

2008-12-01

The KBS-3 method, based on multiple barriers, is the proposed spent fuel disposal method both in Sweden and Finland. KBS-3H and KBS-3V are the two design alternatives of the KBS-3 spent fuel disposal method. Posiva and SKB have conducted a joint research, demonstration and development (RD and D) programme in 2002-2007 with the overall aim of establishing whether KBS-3H represents a feasible alternative to the reference alternative KBS-3V. The overall objectives of the present phase covering the period 2004-2007 have been to demonstrate that the horizontal deposition alternative is technically feasible and to demonstrate that it fulfils the same long-term safety requirements as KBS-3V. The safety studies conducted as part of this programme include a safety assessment of a preliminary design of a KBS-3H repository for spent nuclear fuel located about 400 m underground at the Olkiluoto site, which is the proposed site for a spent fuel repository in Finland. This report summarises the biosphere analysis conducted in the KBS-3H safety studies. The most important components of the analysis are presented in this report: i) predictions of the physical terrain and the ecosystems possibly receiving contaminant releases from the repository, ii) modelling of the transport of radionuclides in the entire landscape, taking into account that the ecosystems currently present at the site will evolve over time, and, iii) the estimation of potential doses to humans. The main outcome from the present analysis, dealing with radiological safety and compliance with regulatory requirements, is the annual landscape dose, which is related to individuals fully utilising the maximum production of food and water from the potentially contaminated area. In order to facilitate comparisons with earlier assessments, resulting release rates into the biosphere, from both KBS-3H and TILA-99 calculation cases, were used as inputs for the biosphere analysis. The present study shows that none of the

Safety training parks – A case study on the effectiveness of the trainings

DEFF Research Database (Denmark)

Räsänen, Tuula; Sormunen, E.; Reiman, Arto

The Safety Training Park (STP) concept is a unique Finnish safety training innovation. The STP provides different actors of the construction industry and other branches a practical occupational safety and health (OSH) training area. To the authors’ knowledge, no such parks exist in Europe besides...... Finland. Objec-tive was to study the effectiveness of the STP trainings at a large case company which participated in this study and which has actively trained its personnel in the park. The study was conducted from February 2015 to Feb-ruary 2017. Several key success factors were identified...... in the interviews of this case study. In addition, the company OSH statistics (2010 – 2016) showed a positive development at safety level. However, The Nordic Safety Climate Questionnaire did not show any significant change of results in a one year period. According to the results of the group interviews...

Technical evaluation of the alternate to the keylock control to the bypass valves for the Davis-Besse nuclear power plant, Unit 1

International Nuclear Information System (INIS)

Ibarra, J.G.

1979-09-01

This report documents the technical evaluation of the alternate to the keylock control to the bypass valves for the Davis-Besse nuclear power plant, Unit 1. The review criteria are inferred from the NRC Reactor Safety Study (WASH-1400) and the Safety Evaluation Report for Davis-Besse. This report is supplied as part of the Selected Electrical, Instrumentation, and Control Systems Issues Program being conducted for the US Nuclear Regulatory Commission by Lawrence Livermore Laboratory

Studying Patient Safety Culture from the Viewpoint of Nurse in educational hospitals Ilam City

Directory of Open Access Journals (Sweden)

Milad Borji

2016-12-01

Full Text Available Introduction: Patient safety culture is the first necessary step to reduce medical errors and improve patient's condition. In this context, this article aims at studying the condition of patient safety culture in hospitals in Elam in 2016. Materials and Methods: In this cross-sectional study, 150 nurses in Ilam were randomly selected. The Culture Hospital Survey on Patient Safety (HSOPSC was used and its reliability and validity had been confirmed by the previous studies. The data were analyzed by SPSS17. Results: The results showed that the nurses' safety was at positive(62.37± 8.70 and there could be found no significant difference in patient safety among the studied hospitals in this article (P<.05. Extra-organizational teamwork and non-punitive response, among the aspects of patient safety, had the lowest means and organizational learning and general understanding had the highest. Conclusion: Considering the importance of patient safety, the interventions need to be performed in order to improve the patient safety condition among nurses, especially in two aspects of extra-organizational teamwork and non-punitive response that had the lowest means.

ALTERNATIVE DISPUTE RESOLUTION IN BANYUMAS REGENCY: IN THE PERSPECTIVE OF CULTURAL STUDIES

Directory of Open Access Journals (Sweden)

Singkir Hudijono

2012-11-01

Full Text Available This study discusses about an Alternative Dispute Resolution in BanyumasRegency as a non-litigation dispute resolution. The problem observed was a breakthroughtaken by the Society in Banyumas Regency in overcoming the so far deadlock of lawenforcement and the attitude of not trusting the justice enforcement. It has been a publicsecret that the dispute resolutions employing the legal centralism paradigm have beendominated by the judicial network. This has caused the acknowledgement of the state lawto decrease, being a commodity that can be traded. The research aims at finding out anddescribing how the alternative dispute resolution (ADR emerges as an alternativemechanism in deconstructing the legal centralism; interpreting and describing what ismeant by the alternative dispute resolution (ADR in the development of progressive law.This research was conducted employing qualitative method. In this context, theresearcher explored various pieces of related information with the reason that the societyin Banyumas Regency has chosen the alternative dispute resolution mechanism as themechanism in deconstructing the legal centralism. The research was conducted asfollows: the problems were identified, the theories for analyzing the data were selected,the primary and secondary data were collected, the collected data were analyzed andinterpreted, and finally, the results of the research were written and constructed. Thetheories employed were critical legal studies, deconstruction, and large narration criticismtheories.The results of the research show that: firstly, the alternative dispute resolution hasemerged because of the awakened local knowledge, as the form of anticipation to theineffective formal law domination. With regard to the effect of global intercourse, thealternative dispute resolution has emerged because of the refusal against the culturalhomogeneity. Secondly, the implementation of the alternative dispute resolution hasbecome the preferred

Overview of the reactor safety study consequence model

International Nuclear Information System (INIS)

Wall, I.B.; Yaniv, S.S.; Blond, R.M.; McGrath, P.E.; Church, H.W.; Wayland, J.R.

1977-01-01

The Reactor Safety Study (WASH-1400) is a comprehensive assessment of the potential risk to the public from accidents in light water power reactors. The engineering analysis of the plants is described in detail in the Reactor Safety Study: it provides an estimate of the probability versus magnitude of the release of radioactive material. The consequence model, which is the subject of this paper, describes the progression of the postulated accident after the release of the radioactive material from the containment. A brief discussion of the manner in which the consequence calculations are performed is presented. The emphasis in the description is on the models and data that differ significantly from those previously used for these types of assessments. The results of the risk calculations for 100 light water power reactors are summarized

Nuclear safety cooperation for Soviet designed reactors

International Nuclear Information System (INIS)

Reisman, A.W.; Horak, W.C.

1995-01-01

The nuclear accident at the Chernobyl nuclear power plant in 1986 first alerted the West to the significant safety risks of Soviet designed reactors. Five years later, this concern was reaffirmed when the IAEA, as a result of a review by an international team of nuclear safety experts, announced that it did not believe the Kozloduy nuclear power plants in Bulgaria could be operated safely. To address these safety concerns, the G-7 summit in Munich in July 1992 outlined a five point program to address the safety problems of Soviet Designed Reactors: operational safety improvement; near-term technical improvements to plants based on safety assessment; enhancing regulatory regimes; examination of the scope for replacing less safe plants by the development of alternative energy sources and the more efficient use of energy; and upgrading of the plants of more recent design. As of early 1994, over 20 countries and international organizations have pledged hundreds of millions of dollars in financial assistance to improve safety. This paper summarizes these assistance efforts for Soviet designed reactors, draws lessons learned from these activities, and offers some options for better addressing these concerns

Minilaparoscopic hysterectomy made easy: first report on alternative instrumentation and new integrated energy platform.

Science.gov (United States)

Ng, Ying Woo; Lim, Li Min; Fong, Yoke Fai

2014-05-01

Minilaparoscopy is an attractive approach for hysterectomy due to advantages such as reduced morbidities and enhanced cosmesis. However, it has not been popularized due to the lack of suitable instruments and high technical demand. We aim to highlight the first case of minilaparoscopic hysterectomy reported in Asia and the use of a new integrated energy platform, Thunderbeat. We would like to propose an alternative method of instrumentation, so as to improve the feasibility and safety of minilaparoscopic hysterectomy. The first minilaparoscopic hysterectomy in Singapore was successfully completed using the alternative instrumentation and new energy platform. There was no conversion or complication during the surgery. The patient recovered uneventfully. To our knowledge, this is the first report on the use of such alternative instrumentation. This approach in instrumentation and the new energy platform will improve the feasibility and speed of the surgery and ensure safety in our patients. © 2014 The Authors. Journal of Obstetrics and Gynaecology Research © 2014 Japan Society of Obstetrics and Gynecology.

Use of animals for toxicology testing is necessary to ensure patient safety in pharmaceutical development.

Science.gov (United States)

Mangipudy, Raja; Burkhardt, John; Kadambi, Vivek J

2014-11-01

There is an active debate in toxicology literature about the utility of animal testing vis-a-vis alternative in vitro paradigms. To provide a balanced perspective and add to this discourse it is important to review the current paradigms, explore pros and cons of alternatives, and provide a vision for the future. The fundamental goal of toxicity testing is to ensure safety in humans. In this article, IQ Consortium DruSafe, while submitting the view that nonclinical testing in animals is an important and critical component of the risk assessment paradigm in developing new drugs, also discusses its views on alternative approaches including a roadmap for what would be required to enhance the utilization of alternative approaches in the safety assessment process. Copyright © 2014 Elsevier Inc. All rights reserved.

Alternating treatment with didanosine and zidovudine versus either drug alone for the treatment of advanced HIV infection. The Alter Study. Nordic HIV Therapy Group

DEFF Research Database (Denmark)

Gerstoft, J; Melander, H; Bruun, J N

1997-01-01

The efficacy and safety of an alternating regime with zidovudine and didanosine versus treatment with either drug alone were investigated in a randomized, open, controlled trial, 552 patients with advanced HIV infection, 47% of whom had received prior treatment with zidovudine, were enrolled...... distributed between the 3 treatment groups. In the subgroup of patients with a CD4 count

Comparisons of alternative sites for the encapsulation plant

International Nuclear Information System (INIS)

Havel, R.

2000-12-01

This report discuses the pros and cons of localizing the spent fuel encapsulation plant at the planned Swedish repository for spent nuclear fuel or at CLAB (Central interim storage facility for spent nuclear fuel). After weighing together all aspects (economy, technology, safety, transports, personnel and environment) it is concluded that building the encapsulation plant in direct connection to CLAB is the most advantageous alternative

Alternative Fuels Data Center: Indiana Transportation Data for Alternative

Science.gov (United States)

(nameplate, MW) 1,430 Source: BioFuels Atlas from the National Renewable Energy Laboratory Case Studies Video Alternative Fuels Save Money in Indy April 1, 2012 More Case Studies Videos Text Version More Indiana Videos on YouTube Video thumbnail for Indiana Beverage Company Invests in Alternative Fuels Indiana Beverage

Nuclear safety

International Nuclear Information System (INIS)

Tarride, Bruno

2015-10-01

The author proposes an overview of methods and concepts used in the nuclear industry, at the design level as well as at the exploitation level, to ensure an acceptable safety level, notably in the case of nuclear reactors. He first addresses the general objectives of nuclear safety and the notion of acceptable risk: definition and organisation of nuclear safety (relationships between safety authorities and operators), notion of acceptable risk, deterministic safety approach and main safety principles (safety functions and confinement barriers, concept of defence in depth). Then, the author addresses the safety approach at the design level: studies of operational situations, studies of internal and external aggressions, safety report, design principles for important-for-safety systems (failure criterion, redundancy, failure prevention, safety classification). The next part addresses safety during exploitation and general exploitation rules: definition of the operation domain and of its limits, periodic controls and tests, management in case of incidents, accidents or aggressions

The transformation of trust in China's alternative food networks: disruption, reconstruction, and development

Directory of Open Access Journals (Sweden)

Raymond Yu. Wang

2015-06-01

Full Text Available Food safety issues in China have received much scholarly attention, yet few studies systematically examined this matter through the lens of trust. More importantly, little is known about the transformation of different types of trust in the dynamic process of food production, provision, and consumption. We consider trust as an evolving interdependent relationship between different actors. We used the Beijing County Fair, a prominent ecological farmers' market in China, as an example to examine the transformation of trust in China's alternative food networks. We argue that although there has been a disruption of institutional trust among the general public since 2008 when the melamine-tainted milk scandal broke out, reconstruction of individual trust and development of organizational trust have been observed, along with the emergence and increasing popularity of alternative food networks. Based on more than six months of fieldwork on the emerging ecological agriculture sector in 13 provinces across China as well as monitoring of online discussions and posts, we analyze how various social factors - including but not limited to direct and indirect reciprocity, information, endogenous institutions, and altruism - have simultaneously contributed to the transformation of trust in China's alternative food networks. The findings not only complement current social theories of trust, but also highlight an important yet understudied phenomenon whereby informal social mechanisms have been partially substituting for formal institutions and gradually have been building trust against the backdrop of the food safety crisis in China.

Environmental Regulation and Food Safety: Studies of Protection ...

International Development Research Centre (IDRC) Digital Library (Canada)

2006-01-01

Jan 1, 2006 ... Book cover Environmental Regulation and Food Safety: Studies of ... are sometimes perceived in developing countries as nontariff barriers to trade. ... In some cases, products that had initially been refused access to a ...

Non-clinical models: validation, study design and statistical consideration in safety pharmacology.

Science.gov (United States)

Pugsley, M K; Towart, R; Authier, S; Gallacher, D J; Curtis, M J

2010-01-01

The current issue of the Journal of Pharmacological and Toxicological Methods (JPTM) focuses exclusively on safety pharmacology methods. This is the 7th year the Journal has published on this topic. Methods and models that specifically relate to methods relating to the assessment of the safety profile of a new chemical entity (NCE) prior to first in human (FIH) studies are described. Since the Journal started publishing on this topic there has been a major effort by safety pharmacologists, toxicologists and regulatory scientists within Industry (both large and small Pharma as well as Biotechnology companies) and also from Contract Research Organizations (CRO) to publish the surgical details of the non-clinical methods utilized but also provide important details related to standard and non-standard (or integrated) study models and designs. These details from core battery and secondary (or ancillary) drug safety assessment methods used in drug development programs have been the focus of these special issues and have been an attempt to provide validation of methods. Similarly, the safety pharmacology issues of the Journal provide the most relevant forum for scientists to present novel and modified methods with direct applicability to determination of drug safety-directly to the safety pharmacology scientific community. The content of the manuscripts in this issue includes the introduction of additional important surgical methods, novel data capture and data analysis methods, improved study design and effects of positive control compounds with known activity in the model. Copyright 2010 Elsevier Inc. All rights reserved.

Estimating and controlling workplace risk: an approach for occupational hygiene and safety professionals.

Science.gov (United States)

Toffel, Michael W; Birkner, Lawrence R

2002-07-01

The protection of people and physical assets is the objective of health and safety professionals and is accomplished through the paradigm of anticipation, recognition, evaluation, and control of risks in the occupational environment. Risk assessment concepts are not only used by health and safety professionals, but also by business and financial planners. Since meeting health and safety objectives requires financial resources provided by business and governmental managers, the hypothesis addressed here is that health and safety risk decisions should be made with probabilistic processes used in financial decision-making and which are familiar and recognizable to business and government planners and managers. This article develops the processes and demonstrates the use of incident probabilities, historic outcome information, and incremental impact analysis to estimate risk of multiple alternatives in the chemical process industry. It also analyzes how the ethical aspects of decision-making can be addressed in formulating health and safety risk management plans. It is concluded that certain, easily understood, and applied probabilistic risk assessment methods used by business and government to assess financial and outcome risk have applicability to improving workplace health and safety in three ways: 1) by linking the business and health and safety risk assessment processes to securing resources, 2) by providing an additional set of tools for health and safety risk assessment, and 3) by requiring the risk assessor to consider multiple risk management alternatives.

Alberta Environment's weir safety program : options for rehabilitation to improve public safety : a case study of the Calgary weir

Energy Technology Data Exchange (ETDEWEB)

Blakely, D [Alberta Environment, Edmonton, AB (Canada)

2009-07-01

Alberta Environment Water Management Operations (WMO) owns and operates 46 dams and 800 kilometres of canals in Alberta. The WMO consists of 120 staff and several contract operators to take care of this infrastructure. Most of the infrastructure supplies water for irrigation use, which adds 5 billion dollars to the provincial economy annually. Other water uses include stock watering, domestic use, municipal use, recreational use and habitat. Alberta Environment's weir safety program was also discussed along with options for rehabilitation to improve public safety. A case study of Calgary's Weir Dam on the Bow River was highlighted. A brief history of the dam was offered and safety programs around provincially-owned weirs were discussed. Photographs were included to illustrate some of the additional safety measures at the Calgary weir, such as suspended safety buoys upstream of the boom directing paddlers to the portage trail, and signage on the river that can be activated when the boom is out. Typical river users on the Calgary Bow River and safety history at the Calgary Weir were discussed along with other topics such as the Calgary Bow River weir project criteria; project design progress; pre-feasibility options; scale modelling; final design analysis; construction funding; and proposed changes to the safety program for the new weir configuration. figs.

Research study about the establishment of safety culture. Effects of organizational factors in construction industry's safety indices

International Nuclear Information System (INIS)

Kojima, Mitsuhiro; Hirose, Humiko; Takano, Kenichi; Hasegawa, Naoko

1999-01-01

To find the relationships between safety related activities (such as safety patrol' or '4s/5s activities') and accidents rate in the workplace, questionnaires were sent to 965 construction companies and 120 answers were returned. In this questionnaire, safety activities, safety regulations and safety policies of the companies were asked and organizational climates, company policies, philosophies and the number of accidents in workplace were also asked. There seems some relationships between accidents rate and safety activities, safety regulations and safety policies in the companies, but the deviations between estimate values and observed values are so great that it seems impossible to estimate the accidents rate in the working place from the safety activities, safety regulations and safety policies of the companies. On the other hand, some characteristics of safety activities and organizational climates in the construction industry were identified using multi variants analysis. More detailed researches using sophisticated questionnaire will be conducted in the construction industry and petrochemical industry and relationships between the accidents rate and the safety activities will be compared between different industries. (author)

Concepts and examples of safety analyses for radioactive waste repositories in continental geological formations

International Nuclear Information System (INIS)

1983-01-01

This document is addressed to authorities and specialists responsible for or involved in planning, performing and/or reviewing safety assessments of underground radioactive waste repositories. It is a companion to a general introductory document on the subject ''Safety Assessment for the Underground Disposal of Radioactive Wastes'', IAEA Safety Series No. 56, 1981, and reference to this earlier document will facilitate the reader's understanding of the present report. Since examples of safety analyses are summarized here, it is hoped that this document will contribute to providing a basis for a common understanding among authorities and specialists concerned with the numerous studies involving a variety of scientific disciplines. While providing technical information, this document is also intended to stimulate further international discussion. The purposes of this report are: a) to identify the factors to be taken into account in radiological safety analyses of deep geological repositories, indicating as far as possible their relative importance during the various phases of system development; b) to show how these factors have been analysed in various safety assessment studies; and c) to comment on the merits of the selected and alternative approaches

Concepts and examples of safety analyses for radioactive waste repositories in continental geological formations

Energy Technology Data Exchange (ETDEWEB)

1983-01-01

This document is addressed to authorities and specialists responsible for or involved in planning, performing and/or reviewing safety assessments of underground radioactive waste repositories. It is a companion to a general introductory document on the subject ''Safety Assessment for the Underground Disposal of Radioactive Wastes'', IAEA Safety Series No. 56, 1981, and reference to this earlier document will facilitate the reader's understanding of the present report. Since examples of safety analyses are summarized here, it is hoped that this document will contribute to providing a basis for a common understanding among authorities and specialists concerned with the numerous studies involving a variety of scientific disciplines. While providing technical information, this document is also intended to stimulate further international discussion. The purposes of this report are: a) to identify the factors to be taken into account in radiological safety analyses of deep geological repositories, indicating as far as possible their relative importance during the various phases of system development; b) to show how these factors have been analysed in various safety assessment studies; and c) to comment on the merits of the selected and alternative approaches.

Evaluation of SKB/Posiva's report on the horizontal alternative of the KBS-3 method

Energy Technology Data Exchange (ETDEWEB)

Apted, Michael J.; Bennet, David G.; Saario, Timtetr; Savage, David

2009-10-15

The KBS-3 method, based on multiple barriers, is the proposed spent fuel disposal method both in Sweden and Finland. The method has two design alternatives: the vertical (KBS-3V) and the horizontal (KBS-3H). In the KBS-3H concept, copper canisters loaded with spen nuclear fuel are encased in a compacted bentonite buffer with an outer supporting supercontainer composed of a mild steel basket, and the entire supercontainer is emplaced horizontally in long emplacement drifts. SKB and Posiva have conducted a joint research, development and demonstration (RDandD) programme in 2002-2007 with the overall aim of establishing whether the KBS-3H represents a feasible alternative to the reference alternative KBS-3V. The objectives have been to demonstrate that the horizontal deposition alternative is technically feasible and that it fulfils the same long-term safety requirement as the KBS-3V. Swedish Radiation Safety Authority (SSM) considers that it is a proper time to evaluate the work carried by SKB and Posiva when this period of joint research is ended and a relatively complete set of reporting is available. SSM therefore required its external expert group BRITE (the Barrier Review, Integration, Tracking and Evaluation) to evaluate the reporting. The aims of the evaluation are to investigate the differences between the horizontal and vertical design alternatives with respect to: Completeness: has SKB/Posiva identified the full set of key topics, and if not, what additional specific key topics should be evaluated; Depth-of-treatment: has SKB/Posiva analysed the key topics in sufficient depth, and if not, on what specific aspects in more detailed consideration required; Status of information: has SKB/ Posiva provided enough information on the current status of knowledge and uncertainties that impact the understanding of each key topic, and if not, what further information should be cited; Feasibility and practicality: for key issues related to the fabrication and

Safety-related topics from the Nuclear Power Options Viability Study

International Nuclear Information System (INIS)

Trauger, D.B.; White, J.D.

1986-01-01

The Nuclear Power Options Viability Study (NPOVS) evaluated innovative reactor concepts, and this article reviews NPOVS findings, with emphasis on safety and licensing. The reactors studied were of light-water, liquid-metal, and helium-cooled concepts, and most were of modular design. Prelicensed standard plants offer an important step toward regulatory stability and early licensing approvals with public participation before major expenditures. Advanced reactors with passive safety features offer the possibility of performance-based regulation. The concepts studied appear to be potentially viable, but more complete designs will be required before economic evaluations can be definitive

A Study on Drug Safety Monitoring Program in India

Science.gov (United States)

Ahmad, A.; Patel, Isha; Sanyal, Sudeepa; Balkrishnan, R.; Mohanta, G. P.

2014-01-01

Pharmacovigilance is useful in assuring the safety of medicines and protecting the consumers from their harmful effects. A number of single drugs as well as fixed dose combinations have been banned from manufacturing, marketing and distribution in India. An important issue about the availability of banned drugs over the counter in India is that sufficient adverse drug reactions data about these drugs have not been reported. The most common categories of drugs withdrawn in the last decade were nonsteroidal antiinflammatory drugs (28%), antidiabetics (14.28%), antiobesity (14.28%), antihistamines (14.28%), gastroprokinetic drugs (7.14%), breast cancer and infertility drugs (7.14%), irritable bowel syndrome and constipation drugs (7.14%) and antibiotics (7.14%). Drug withdrawals from market were made mainly due to safety issues involving cardiovascular events (57.14%) and liver damage (14.28%). Majority of drugs have been banned since 3-5 years in other countries but are still available for sale in India. The present study compares the drug safety monitoring systems in the developed countries such as the USA and UK and provides implications for developing a system that can ensure the safety and efficacy of drugs in India. Absence of a gold standard for a drug safety surveillance system, variations in culture and clinical practice across countries makes it difficult for India to completely adopt another country's practices. There should be a multidisciplinary approach towards drug safety that should be implemented throughout the entire duration spanning from drug discovery to usage by consumers. PMID:25425751

Studying the Relationship between Individual and Organizational Factors and Nurses' Perception of Patient Safety Culture

Directory of Open Access Journals (Sweden)

Farahnaz Abdolahzadeh

2012-11-01

Full Text Available Introduction: Safety culture is considered as an important factor in improving patient safety. Therefore, identifying individual and organizational factors affecting safety culture is crucial. This study was carried out to determine individual and organizational factors associated with nurses' perception of patient safety culture. Methods: The present descriptive study included 940 nurses working in four training hospitals affiliated with Urmia University of Medical Sciences (Iran. Data was collected through the self-report questionnaire of patient safety culture. Descriptive (number, percent, mean, and standard deviation and inferential (t-test and analysis of variance statistics were used to analyze the data in SPSS. Results: Nurses' perception of patient safety culture was significantly correlated with marital status, workplace, and overtime hours. Conclusion: The results of this study revealed that some individual and organizational factors can impact on nurses' perception of patient safety culture. Nursing authorities should thus pay more attention to factors which promote patient safety culture and ultimately the safety of provided services.

Alternative Tobacco Product Use and Smoking Cessation: A National Study

Science.gov (United States)

Popova, Lucy

2013-01-01

Objectives. We investigated the frequency of alternative tobacco product use (loose leaf, moist snuff, snus, dissolvables, electronic cigarettes [e-cigarettes]) among smokers and the association with quit attempts and intentions. Methods. A nationally representative probability-based cross-sectional survey of 1836 current or recently former adult smokers was completed in November 2011. Multivariate logistic regressions evaluated associations between alternative tobacco product use and smoking cessation behaviors. Results. Of the smokers, 38% had tried an alternative tobacco product, most frequently e-cigarettes. Alternative tobacco product use was associated with having made a quit attempt, and those intending to quit were significantly more likely to have tried and to currently use the products than were smokers with no intentions to quit. Use was not associated with successful quit attempts. Interest in future use of alternative tobacco products was low, except for e-cigarettes. Conclusions. Alternative tobacco products are attractive to smokers who want to quit smoking, but these data did not indicate that alternative tobacco products promote cessation. Unsubstantiated overt and implied claims that alternative tobacco products aid smoking cessation should be prohibited. PMID:23488521

75 FR 22291 - Safety Standard for Toddler Beds

Science.gov (United States)

2010-04-28

... Kiss, Division of Human Factors, Directorate for Engineering Sciences, Consumer Product Safety... testing requirements to address those types of incidents. Accordingly, the Commission proposes a new 16.... With this in mind, the Commission proposes two alternative labels that address the entrapment hazard...

Example of a SWOV (Institute for Road Safety Research) safety study : "Avenida Marginal", Lisbon 1989.

NARCIS (Netherlands)

Janssen, S.T.M.C.

1991-01-01

This paper describes the accident study on the Marginal Road between Alges and Cascais in Portugal. The aim of this study was to produce a philosophy for a strategy to select the best safety measures out of several which had already been proposed. The general point of departure in this philosophy is

Assessment of Safety Condition in One of the Teaching Hospitals in Kermanshah (2015: A Case Study

Directory of Open Access Journals (Sweden)

Masod Ghanbari Kakavand

2016-09-01

Full Text Available Background & Aims of the Study: Many working conditions-related stress factors that can produce injuries and illnesses are important in hospital environments. So, the health and safety of nurses and patients from workplace-induced injuries and illnesses is important. In this study, we have assessed the safety condition of one of the teaching hospitals in Kermanshah (2015. Materials and Methods: This descriptive and cross-sectional study was conducted in one of the teaching hospital of Kermanshah University of medical sciences. For this aim a checklist was prepared based on the Occupational Safety and Health Administration's standards and Part 3 of the manual of National Building Regulations. These checklists comprised (The final checklist had 239 questions of 9 dimensions various sections of safety including; fire safety, building safety, electrical safety, emergency exit routes safety, heating and cooling equipment safety, operating room and laundry room and salty home safety. Eventually, using SPSS 16 and descriptive statistics, data were analyzed. Results: According to the results of this study, 66.6% of the units had poor safety and 33.4% of them were moderately safe. As well as, only ICU and CCU unit, heating and cooling equipment and operational room showed moderate compliance with safety requirements and other sections were poorly complied. Conclusion: The results of this study showed that safety conditions of hospital were not at favorable level. These poor safety statues can jeopardize patients and hospital personnel. Thus some interventions such as improvement of working conditions, compliance with safety acts and implementation of health, safety and environmental management system would be necessary.

Novel glyceryl glucoside is a low toxic alternative for cryopreservation agent

Energy Technology Data Exchange (ETDEWEB)

Su, Cathy; Allum, Allison J. [Department of Environmental & Radiological Health Sciences, Colorado State University, 1618 Campus Delivery, Fort Collins, CO 80523 (United States); Aizawa, Yasushi [Research and Development Group, Toyo Sugar Refining Co. Ltd., Tokyo 103-0046 (Japan); Kato, Takamitsu A., E-mail: Takamitsu.Kato@Colostate.edu [Department of Environmental & Radiological Health Sciences, Colorado State University, 1618 Campus Delivery, Fort Collins, CO 80523 (United States)

2016-08-05

Glyceryl glucoside (GG, α-D-glucosyglycerol) is a natural glycerol derivative found in alcoholic drinks. Recently GG has been used as an alternative for glycerol in cosmetic products. However, the safety of using GG is still unclear. Currently, dimethyl sulfoxide (DMSO) and glycerol are wildly used in cryopreservation. Despite GG being a derivative of glycerol, the ability of GG in cryopreservation is still unknown. By using a system of Chinese Hamster Ovary cells (CHO), A549 cells and AG1522 cells, the study examined the cryoprotective effects of DMSO, glycerol and GG. Cytotoxic and genotoxic responses induced by the three chemicals were also investigated with CHO to determine the safety of GG for cosmetic products. Our data suggests that GG has great cryopresearvation ability in the concentration of 30%–40% (v/v). For cytotoxic studies, DMSO showed the highest cytotoxicity above 3% (v/v) in cell doubling time delay among three chemicals. For the acute cytotoxicity with trypan blue dye exclusion assay, GG showed stronger cell killing effect within 24 h above 4% (v/v). For the continuous cytotoxicity with colony formation assay for 7 days, DMSO showed significantly reduced clonogenic ability above 2%. In genotoxicity studies, CHO treated with glycerol at 2% concentration induced three times higher frequencies of sister chromatid exchange (SCE) than background levels. GG did not induce significant amounts of SCE compared to background. Micronuclei formation was equally observed in the 2% and above concentrations of glycerol and GG. Our data showed that GG has significant effects on cryopreservation compared to DMSO. Glycerol and GG have similar cytotoxicity effects to CHO, but glycerol induced genotoxic responses in the same concentration. Therefore, we conclude that GG may be a safer alternative compound to glycerol in cosmetic products and safer alternative to DMSO in cryopreservation. -- Highlights: •Glyceryl Glucoside is low cytotoxicity and genotoxicity

Zolpidem and traffic safety - the importance of treatment compliance.

Science.gov (United States)

Verster, Joris C; Volkerts, Edmund R; Olivier, Berend; Johnson, William; Liddicoat, Laura

2007-09-01

Zolpidem is among the most frequently prescribed hypnotic drugs for those who suffer from insomnia. Recent media reports drew attention to driving impairment after zolpidem misuse. This review summarizes the available data on the effects of recommended use and misuse of zolpidem on driving ability and traffic safety. Both experimental studies and roadside evidence were taken into account. From these studies it must be concluded that patients should fully comply with the prescription instructions of zolpidem, i.e. to take the medication just prior to a full 8 hours of uninterrupted sleep. If this strategy is adopted, zolpidem is a safe alternative to benzodiazpine hypnotics and zopiclone who do show significant driving impairment the morning following bedtime administration. However, to ensure traffic safety higher dosages than recommended (10 mg) or allowing less than 8 hours between zolpidem intake and actual operation of a motor vehicle should be avoided.

Patient safety risk factors in minimally invasive surgery : A validation study

NARCIS (Netherlands)

Rodrigues, S.P.; Ter Kuile, M.; Dankelman, J.; Jansen, F.W.

2012-01-01

This study was conducted to adapt and validate a patient safety (PS) framework for minimally invasive surgery (MIS) as a first step in understanding the clinical relevance of various PS risk factors in MIS. Eight patient safety risk factor domains were identified using frameworks from a systems

An integrative review of patient safety in studies on the care and safety of patients with communication disabilities in hospital.

Science.gov (United States)

Hemsley, Bronwyn; Georgiou, Andrew; Hill, Sophie; Rollo, Megan; Steel, Joanne; Balandin, Susan

2016-04-01

To review the research literature on the experiences of patients with communication disabilities in hospital according to the Generic Model of patient safety. In 2014 and 2015, we searched four scientific databases for studies with an aim or result relevant to safety of hospital patients with communication disabilities. The review included 27 studies. A range of adverse event types were outlined in qualitative research. Little detail was provided about contributing or protective factors for safety incidents in hospital for these patients or the impact of the incidents on the patient or organisations involved. Further research addressing the safety of patients with communication disabilities is needed. Sufficient detail is required to identify the nature, timing, and detection of incidents; factors that contribute to or prevent adverse events; and detail the impact of the adverse events. In order to provide safe and effective care to people with communication disabilities in hospital, a priority for health and disability services must be the design and evaluation of ecologically appropriate and evidence-based interventions to improve patient care, communication, and reduce the risk of costly and harmful patient safety incidents. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Efficacy and Safety of a Mineral Oil-Based Head Lice Shampoo: A Randomized, Controlled, Investigator-Blinded, Comparative Study.

Science.gov (United States)

Wolf, Luise; Eertmans, Frank; Wolf, Doerte; Rossel, Bart; Adriaens, Els

2016-01-01

Due to increased resistance and safety concerns with insecticide-based pediculicides, there is growing demand for head lice treatments with a physical mode of action. Certain mineral oils kill lice by blocking spiracles or by disrupting the epicuticular wax layer. The present study was performed to evaluate efficacy and safety of a mineral oil-based shampoo. This randomized, controlled, investigator-blinded, monocentric study (EudraCT registration no. 2014-002918-23) was performed from October 2014-June 2015 in Germany. A mineral oil shampoo (Mosquito® Med Läuse Shampoo 10 in Germany, Paranix or Silcap shampoo elsewhere), registered as medical device, was compared to a conventional, locally reimbursed, pyrethroid-based pediculicide (Goldgeist® Forte solution). In total, 107 patients (>1 year) with confirmed head lice infestation were included (test arm: n = 53; control arm: n = 54). All subjects received two applications of either test or control product at day 0 and day 7, according to the instructions for use. Efficacy and safety was evaluated directly, 1h and 24h after first application, before and after second treatment, and at day 10. The main objective was demonstrating a cure rate for the test product, being superior to 70% at day 10. Cure rates at day 10 (corrected for re-infestation) for the test product (96.1%) and control (94%) significantly exceeded the pre-defined target (70%) (p shampoo) can be safe and effective alternatives for insecticide-based pediculicides, with less risk for development of resistance because of the physical mode of action. German Clinical Trials Register (DRKS) DRKS00009753 and EudraCT database 2014-002918-23.

Rational quantitative safety goals: a summary

International Nuclear Information System (INIS)

Unwin, S.D.; Hayns, M.R.

1984-08-01

We introduce the notion of a Rational Quantitative Safety Goal. Such a goal reflects the imprecision and vagueness inherent in any reasonable notion of adequate safety and permits such vagueness to be incorporated into the formal regulatory decision-making process. A quantitative goal of the form, the parameter x, characterizing the safety level of the nuclear plant, shall not exceed the value x 0 , for example, is of a non-rational nature in that it invokes a strict binary logic in which the parameter space underlying x is cut sharply into two portions: that containing those values of x that comply with the goal and that containing those that do not. Here, we utilize an alternative form of logic which, in accordance with any intuitively reasonable notion of safety, permits a smooth transition of a safety determining parameter between the adequately safe and inadequately safe domains. Fuzzy set theory provides a suitable mathematical basis for the formulation of rational quantitative safety goals. The decision-making process proposed here is compatible with current risk assessment techniques and produces results in a transparent and useful format. Our methodology is illustrated with reference to the NUS Corporation risk assessment of the Limerick Generating Station

Study of system safety evaluation on LTO of national project. NISA safety research project on system safety of nuclear power plants

International Nuclear Information System (INIS)

Takizawa, Masayuki; Sekimura, Naoto; Miyano, Hiroshi; Aoyama, Katsunobu

2012-01-01

Japanese safety regulatory body, that is, Nuclear and Industrial Safety Agency (NISA) started a 5-year national safety research project as 'the first stage' from 2006 FY to 2010 FY whose objective is 'Improve the technical information basis in order to utilize knowledge as well as information related to ageing management and maintenance of NPPs. Fukushima disaster happened in March 2011, and the priority of research needs for ageing management dramatically changed in Japan. The second-stage national project started in October 2011 with the concept of 'system safety' of NNPs where not only ageing management on degradation phenomena of important components but also safety management on total plant systems are paid attention to. The second-stage project is so called 'Japanese Ageing Management Program for System Safety (JAMPSS)'. (author)

International Harmonization and Cooperation in the Validation of Alternative Methods.

Science.gov (United States)

Barroso, João; Ahn, Il Young; Caldeira, Cristiane; Carmichael, Paul L; Casey, Warren; Coecke, Sandra; Curren, Rodger; Desprez, Bertrand; Eskes, Chantra; Griesinger, Claudius; Guo, Jiabin; Hill, Erin; Roi, Annett Janusch; Kojima, Hajime; Li, Jin; Lim, Chae Hyung; Moura, Wlamir; Nishikawa, Akiyoshi; Park, HyeKyung; Peng, Shuangqing; Presgrave, Octavio; Singer, Tim; Sohn, Soo Jung; Westmoreland, Carl; Whelan, Maurice; Yang, Xingfen; Yang, Ying; Zuang, Valérie

The development and validation of scientific alternatives to animal testing is important not only from an ethical perspective (implementation of 3Rs), but also to improve safety assessment decision making with the use of mechanistic information of higher relevance to humans. To be effective in these efforts, it is however imperative that validation centres, industry, regulatory bodies, academia and other interested parties ensure a strong international cooperation, cross-sector collaboration and intense communication in the design, execution, and peer review of validation studies. Such an approach is critical to achieve harmonized and more transparent approaches to method validation, peer-review and recommendation, which will ultimately expedite the international acceptance of valid alternative methods or strategies by regulatory authorities and their implementation and use by stakeholders. It also allows achieving greater efficiency and effectiveness by avoiding duplication of effort and leveraging limited resources. In view of achieving these goals, the International Cooperation on Alternative Test Methods (ICATM) was established in 2009 by validation centres from Europe, USA, Canada and Japan. ICATM was later joined by Korea in 2011 and currently also counts with Brazil and China as observers. This chapter describes the existing differences across world regions and major efforts carried out for achieving consistent international cooperation and harmonization in the validation and adoption of alternative approaches to animal testing.

Blood transfusion safety: a new philosophy.

Science.gov (United States)

Franklin, I M

2012-12-01

Blood transfusion safety has had a chequered history, and there are current and future challenges. Internationally, there is no clear consensus for many aspects of the provision of safe blood, although pan-national legislation does provide a baseline framework in the European Union. Costs are rising, and new safety measures can appear expensive, especially when tested against some other medical interventions, such as cancer treatment and vaccination programmes. In this article, it is proposed that a comprehensive approach is taken to the issue of blood transfusion safety that considers all aspects of the process rather than considering only new measures. The need for an agreed level of safety for specified and unknown risks is also suggested. The importance of providing care and support for those inadvertently injured as a result of transfusion problems is also made. Given that the current blood safety decision process often uses a utilitarian principle for decision making--through the calculation of Quality Adjusted Life Years--an alternative philosophy is proposed. A social contract for blood safety, based on the principles of 'justice as fairness' developed by John Rawls, is recommended as a means of providing an agreed level of safety, containing costs and providing support for any adverse outcomes. © 2012 The Author. Transfusion Medicine © 2012 British Blood Transfusion Society.

Alternative processes for managing existing commercial high-level radioactive wastes

International Nuclear Information System (INIS)

1976-04-01

A number of alternatives are discussed for managing high-level radioactive waste presently stored at the West Valley, New York, plant owned by Nuclear Fuel Services, Inc. These alternatives (liquid storage, conversion to cement, shale fracturing, shale cement, calcination, aqueous silicate, conversion to glass, and salt cake) are limited to concepts presently under active investigation by ERDA. Each waste management option is described and examined regarding the status of the technology; its applications to managing NFS waste; its advantages and disadvantages; the research and development needed to implement the option; safety considerations; and estimated costs and time to implement the process

Pressure Safety: Advanced Self-Study 30120

Energy Technology Data Exchange (ETDEWEB)

Glass, George [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-02-29

Pressure Safety Advance Self-Study (Course 30120) consists of an introduction, five modules, and a quiz. To receive credit in UTrain for completing this course, you must score 80% or better on the 15-question quiz (check UTrain). Directions for initiating the quiz are appended to the end of this training manual. This course contains several links to LANL websites. UTrain might not support active links, so please copy links into the address line in your browser.

A Quantitative Feasibility Study on Potential Safety Improvement Effects of Advanced Safety Features in APR-1400 when Applied to OPR-1000

Energy Technology Data Exchange (ETDEWEB)

Ualikhan Zhiyenbayev [KAIST, Daejeon (Korea, Republic of); Chung, Dae Wook [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2015-10-15

This study aims to test the feasibility of the applications using Probabilistic Safety Assessment (PSA). Particularly, three of those advanced safety features are selected as follows: 1. Providing an additional Emergency Diesel Generator (EDG); 2. Increasing the capacity of Class 1E batteries; 3. Placing a Refueling Water Storage Tank (RWST) inside containment, i.e., change from RWST to IRWST. The Advanced Power Reactor 1400 (APR-1400) adopts several advanced safety features compared to its predecessor, the Optimized Power Reactor 1000 (OPR-1000), which includes an additional Emergency Diesel Generator, increase in battery capacity, in-containment refueling water storage tank (IRWST), and so on. Considering the remarkable advantages of these safety features in safety improvement and the design similarities between APR-1400 and OPR-1000, it is feasible to apply key advanced safety features of APR-1400 to OPR-1000 to enhance the safety. The selected safety features are incorporated into OPR-1000 PSA model using the Advanced Information Management System (AIMS) for PSA and CDFs are re-evaluated for each application and combination of three applications. Based on current results, it is concluded that three of key advanced safety features of APR-1400 can be effectively applied to OPR-1000, resulting in considerable safety improvement. In aggregate, three advanced safety features, which are an additional EDG, increased battery capacity and IRWST, can reduce the CDF of OPR-1000 by more than 15% when applied altogether.

A Quantitative Feasibility Study on Potential Safety Improvement Effects of Advanced Safety Features in APR-1400 when Applied to OPR-1000

International Nuclear Information System (INIS)

Ualikhan Zhiyenbayev; Chung, Dae Wook

2015-01-01

This study aims to test the feasibility of the applications using Probabilistic Safety Assessment (PSA). Particularly, three of those advanced safety features are selected as follows: 1. Providing an additional Emergency Diesel Generator (EDG); 2. Increasing the capacity of Class 1E batteries; 3. Placing a Refueling Water Storage Tank (RWST) inside containment, i.e., change from RWST to IRWST. The Advanced Power Reactor 1400 (APR-1400) adopts several advanced safety features compared to its predecessor, the Optimized Power Reactor 1000 (OPR-1000), which includes an additional Emergency Diesel Generator, increase in battery capacity, in-containment refueling water storage tank (IRWST), and so on. Considering the remarkable advantages of these safety features in safety improvement and the design similarities between APR-1400 and OPR-1000, it is feasible to apply key advanced safety features of APR-1400 to OPR-1000 to enhance the safety. The selected safety features are incorporated into OPR-1000 PSA model using the Advanced Information Management System (AIMS) for PSA and CDFs are re-evaluated for each application and combination of three applications. Based on current results, it is concluded that three of key advanced safety features of APR-1400 can be effectively applied to OPR-1000, resulting in considerable safety improvement. In aggregate, three advanced safety features, which are an additional EDG, increased battery capacity and IRWST, can reduce the CDF of OPR-1000 by more than 15% when applied altogether

Safety culture assessment in petrochemical industry: a comparative study of two algerian plants.

Science.gov (United States)

Boughaba, Assia; Hassane, Chabane; Roukia, Ouddai

2014-06-01

To elucidate the relationship between safety culture maturity and safety performance of a particular company. To identify the factors that contribute to a safety culture, a survey questionnaire was created based mainly on the studies of Fernández-Muñiz et al. The survey was randomly distributed to 1000 employees of two oil companies and realized a rate of valid answer of 51%. Minitab 16 software was used and diverse tests, including the descriptive statistical analysis, factor analysis, reliability analysis, mean analysis, and correlation, were used for the analysis of data. Ten factors were extracted using the analysis of factor to represent safety culture and safety performance. The results of this study showed that the managers' commitment, training, incentives, communication, and employee involvement are the priority domains on which it is necessary to stress the effort of improvement, where they had all the descriptive average values lower than 3.0 at the level of Company B. Furthermore, the results also showed that the safety culture influences the safety performance of the company. Therefore, Company A with a good safety culture (the descriptive average values more than 4.0), is more successful than Company B in terms of accident rates. The comparison between the two petrochemical plants of the group Sonatrach confirms these results in which Company A, the managers of which are English and Norwegian, distinguishes itself by the maturity of their safety culture has significantly higher evaluations than the company B, who is constituted of Algerian staff, in terms of safety management practices and safety performance.

The role of the Therapeutic Goods Administration and the Medicine and Medical Devices Safety Authority in evaluating complementary and alternative medicines in Australia and New Zealand

International Nuclear Information System (INIS)

Ghosh, Dilip; Skinner, Margot; Ferguson, Lynnette R.

2006-01-01

Currently, the regulation of complementary and alternative medicines and related health claims in Australia and New Zealand is managed in a number of ways. Complementary medicines, including herbal, minerals, nutritional/dietary supplements, aromatherapy oils and homeopathic medicines are regulated under therapeutic goods/products legislation. The Therapeutic Goods Administration (TGA), a division of the Commonwealth Department of Health and Ageing is responsible for administering the provisions of the legislation in Australia. The New Zealand Medicines and Medical Devices Safety Authority (Medsafe) administers the provision of legislation in New Zealand. In December 2003 the Australian and New Zealand governments signed a Treaty to establish a single, bi-national agency to regulate therapeutic products, including medical devices prescription, over-the-counter and complementary medicines. A single agency will replace the Australian TGA and the New Zealand Medsafe. The role of the new agency will be to safeguard public health through regulation of the quality, safety and efficacy or performance of therapeutic products in both Australia and New Zealand. The major activities of the new joint Australia New Zealand therapeutic products agency are in product licensing, specifying labelling standards and setting the advertising scheme, together with determining the risk classes of medicines and creating an expanded list of ingredients permitted in Class I medicines. A new, expanded definition of complementary medicines is proposed and this definition is currently under consultation. Related Australian and New Zealand legislation is being developed to implement the joint scheme. Once this legislation is passed, the Treaty will come into force and the new joint regulatory scheme will begin. The agency is expected to commence operation no later than 1 July 2006 and will result in a single agency to regulate complementary and alternative medicines

Safety Valve or Sinkhole? Vocational Schooling in South Africa

OpenAIRE

Pugatch, Todd

2012-01-01

As an alternative to traditional academic schooling, vocational schooling in South Africa may serve as a safety valve for students encountering difficulty in the transition from school to work. Yet if ineffective, vocational schooling could also be a sinkhole, offering little chance for success on the labor market. After defining the terms "safety valve" and "sinkhole" in a model of human capital investment with multiple schooling types, I test for evidence of these characteristics using a pa...

Safety consequences of crew innovation onboard shortsea ships

NARCIS (Netherlands)

Post, W.M.; Langefeld, J.J.

2011-01-01

We have investigated an alternative assignment of manning on board Dutch coasters to show that the current level of safety is maintained when mono disciplinary Chief Engineers are replaced by Marof: Maritime Officers, who have received education in navigational as well as engineering skills (at

B cell remote-handled waste shipment cask alternatives study; TOPICAL

International Nuclear Information System (INIS)

RIDDELLE, J.G.

1999-01-01

The decommissioning of the 324 Facility B Cell includes the onsite transport of grouted remote-handled radioactive waste from the 324 Facility to the 200 Areas for disposal. The grouted waste has been transported in the leased ATG Nuclear Services 3-82B Radioactive Waste Shipping Cask (3-82B cask). Because the 3-82B cask is a U.S. Nuclear Regulatory Commission (NRC)-certified Type B shipping cask, the lease cost is high, and the cask operations in the onsite environment may not be optimal. An alternatives study has been performed to develop cost and schedule information on alternative waste transportation systems to assist in determining which system should be used in the future. Five alternatives were identified for evaluation. These included continued lease of the 3-82B cask, fabrication of a new 3-82B cask, development and fabrication of an onsite cask, modification of the existing U.S. Department of Energy-owned cask (OH-142), and the lease of a different commercially available cask. Each alternative was compared to acceptance criteria for use in the B Cell as an initial screening. Only continued leasing of the 3-82B cask, fabrication of a new 3-82B cask, and the development and fabrication of an onsite cask were found to meet all of the B Cell acceptance criteria

Sandy Hook : alternative access concept plan and vehicle replacement study

Science.gov (United States)

2009-06-01

This study addresses two critical issues of concern to the Sandy Hook Unit of Gateway National : Recreational Area: (1) options for alternative access to Sandy Hook during peak summer season, : particularly when the park is closed to private vehicles...

Key aspects in managing safety when working with multiple contractors: A case study

NARCIS (Netherlands)

Drupsteen, L.; Rasmussen, H.B.; Ustailieva, E.; Kampen, J. van

2015-01-01

Working with multiple contractors in a shared workplace can introduce and increase safety risks due to complexity. The aim of this study was to explore how safety issues are recognized in a specific case and to identify whether clients and contractors perceive problems similarly. The safety issues

System and safety studies of accelerator driven systems for transmutation. Annual report 2007

International Nuclear Information System (INIS)

Arzhanov, Vasily; Fokau, Andrei; Persson, Calle; Runevall, Odd; Sandberg, Nils; Tesinsky, Milan; Wallenius, Janne; Youpeng Zhang

2008-05-01

Within the project 'System and safety studies of accelerator driven systems for transmutation', research on design and safety of sub-critical reactors for recycling of minor actinides is performed. During 2007, the reactor physics division at KTH has calculated safety parameters for EFIT-400 with cermet fuel, permitting to start the transient safety analysis. The accuracy of different reactivity meters applied to the YALINA facility was assessed and neutron detection studies were performed. A model to address deviations from point kinetic behaviour was developed. Studies of basic radiation damage physics included calculations of vacancy formation and activation enthalpies in bcc niobium. In order to predict the oxygen potential of inert matrix fuels, a thermo-chemical model for mixed actinide oxides was implemented in a phase equilibrium code

The nuclear power alternative

International Nuclear Information System (INIS)

Blix, H.

1989-04-01

The Director General of the IAEA stressed the need for energy policies and other measures which would help to slow and eventually halt the present build-up of carbon dioxide, methane and other so-called greenhouse gases, which are held to cause global warming. He urged that nuclear power and various other sources of energy, none of which contribute to global warming, should not be seen as alternatives, but should all be used to counteract the greenhouse effect. He pointed out that the commercially used renewable energies, apart from hydropower, currently represent only 0.3% of the world's energy consumption and, by contrast, the 5% of the world's energy consumption coming from nuclear power is not insignificant. Dr. Blix noted that opposition for nuclear power stems from fear of accidents and concern about the nuclear wastes. But no generation of electricity, whether by coal, hydro, gas or nuclear power, is without some risk. He emphasized that safety can never be a static concept, and that many new measures are being taken by governments and by the IAEA to further strengthen the safety of nuclear power

Enhanced Access Design Alternative I Study

International Nuclear Information System (INIS)

Eble, G.B.

1999-01-01

The purpose of this document is to evaluate Enhanced Design Alternative (EDA) 1, the low temperature repository design concept (CRWMS M and O 1999a). This technical document will provide supporting information for Site Recommendation (SR) and License Application (LA). Preparation of this evaluation will be in accordance with the technical document preparation plan (TDPP), (CRWMS M and O 1999b). EDA 1, one of five EDAs, was evolved from evaluation of a series of design features and alternatives developed during the first phase of the License Application Design Selection (LADS) process. Low, medium, and high temperature concepts were developed from the design features and alternatives prepared during Phase 1 of the LADS effort (CRWMS M and O 1999a). EDA 1 will first be evaluated against a single Screening Criterion, outlined in CRWMS M and O 1999a, which addresses post-closure performance of the repository. The performance of the repository is defined quantitatively as the peak radiological dose rate to an average individual of a critical group at a distance of 20 km from the repository site within 10,000 years. To satisfy this criterion the peak dose rate must not exceed the anticipated regulatory level of 25 mrem/yr within 10,000 years. If the EDA meets the screening criterion, the EDA will be further evaluated against the LADS Phase 2 Evaluation Criteria contained in CRWMS M and O 1999a

Risk prediction, safety analysis and quantitative probability methods - a caveat

International Nuclear Information System (INIS)

Critchley, O.H.

1976-01-01

Views are expressed on the use of quantitative techniques for the determination of value judgements in nuclear safety assessments, hazard evaluation, and risk prediction. Caution is urged when attempts are made to quantify value judgements in the field of nuclear safety. Criteria are given the meaningful application of reliability methods but doubts are expressed about their application to safety analysis, risk prediction and design guidances for experimental or prototype plant. Doubts are also expressed about some concomitant methods of population dose evaluation. The complexities of new designs of nuclear power plants make the problem of safety assessment more difficult but some possible approaches are suggested as alternatives to the quantitative techniques criticized. (U.K.)

Risk-Informed Decision Making: Application to Technology Development Alternative Selection

Science.gov (United States)

Dezfuli, Homayoon; Maggio, Gaspare; Everett, Christopher

2010-01-01

NASA NPR 8000.4A, Agency Risk Management Procedural Requirements, defines risk management in terms of two complementary processes: Risk-informed Decision Making (RIDM) and Continuous Risk Management (CRM). The RIDM process is used to inform decision making by emphasizing proper use of risk analysis to make decisions that impact all mission execution domains (e.g., safety, technical, cost, and schedule) for program/projects and mission support organizations. The RIDM process supports the selection of an alternative prior to program commitment. The CRM process is used to manage risk associated with the implementation of the selected alternative. The two processes work together to foster proactive risk management at NASA. The Office of Safety and Mission Assurance at NASA Headquarters has developed a technical handbook to provide guidance for implementing the RIDM process in the context of NASA risk management and systems engineering. This paper summarizes the key concepts and procedures of the RIDM process as presented in the handbook, and also illustrates how the RIDM process can be applied to the selection of technology investments as NASA's new technology development programs are initiated.

Safety of cupping during bevacizumab therapy.

Science.gov (United States)

Klempner, Samuel J; Costa, Daniel B; Wu, Peggy A; Ariyabuddhiphongs, Kim D

2013-08-01

This study reports on the safety of the complementary and alternative medicine (CAM) practice of cupping in a patient undergoing concomitant therapy with bevacizumab for advanced non-small-cell lung cancer (NSCLC), and raises awareness of the need for improved communication between CAM practitioners and oncologists during the care of patients with cancer. The practice of cupping generates local hyperemia, disrupts superficial vasculature in the dermis, and leads to cutaneous lesions including circular erythema, edema, and subsequently ecchymosis. There are no data on the safety of cupping in patients being treated with bevacizumab. This is a single-institution case report. The setting for this study was a tertiary-care academic medical center. A patient with advanced NSCLC received four cycles of carboplatin AUC 6, paclitaxel 200 mg/m(2), and bevacizumab 15 mg/kg, and was continued on every-3-week maintenance bevacizumab 15 mg/kg. The patient underwent glass dry cupping during cycle six of maintenance bevacizumab treatment without overt cutaneous adverse events or bleeding. The patient did not realize he should have communicated his cupping plans or recent bevacizumab treatment with his providers.

Consumer food handling in the home: a review of food safety studies.

Science.gov (United States)

Redmond, Elizabeth C; Griffith, Christopher J

2003-01-01

Epidemiological data from Europe, North America, Australia, and New Zealand indicate that a substantial proportion of foodborne disease is attributable to improper food preparation practices in consumers' homes. International concern about consumer food safety has prompted considerable research to evaluate domestic food-handling practices. The majority of consumer food safety studies in the last decade have been conducted in the United Kingdom and Northern Ireland (48%) and in the United States (42%). Surveys (questionnaires and interviews), the most frequent means of data collection, were used in 75% of the reviewed studies. Focus groups and observational studies have also been used. One consumer food safety study examined the relationship between pathogenic microbial contamination from raw chicken and observed food-handling behaviors, and the results of this study indicated extensive Campylobacter cross-contamination during food preparation sessions. Limited information about consumers' attitudes and intentions with regard to safe food-handling behaviors has been obtained, although a substantial amount of information about consumer knowledge and self-reported practices is available. Observation studies suggest that substantial numbers of consumers frequently implement unsafe food-handling practices. Knowledge, attitudes, intentions, and self-reported practices did not correspond to observed behaviors, suggesting that observational studies provide a more realistic indication of the food hygiene actions actually used in domestic food preparation. An improvement in consumer food-handling behavior is likely to reduce the risk and incidence of foodborne disease. The need for the development and implementation of food safety education strategies to improve specific food safety behaviors is reviewed in this paper.

The safety designs for the TITAN reversed-field pinch reactor study

International Nuclear Information System (INIS)

Wong, C.P.C.; Cheng, E.T.; Creedon, R.L.; Hoot, C.G.; Schultz, K.R.; Grotz, S.P.; Blanchard, J.; Sharafat, S.; Najmabadi, F.

1989-01-01

TITAN is a study to investigate the potential of the reversed-field pinch concept as a compact, high-power density energy system. Two reactor concepts were developed, a self-cooled lithium design with vanadium structure and an aqueous solution loop-in-pool design, both operating at 18 MW/m 2 . The key safety features of the TITAN-I lithium-vanadium blanket design are in material selection, fusion power core configuration selection, lithium piping connections, and passive lithium drain tank system. Based on these safety features and results from accident evaluation, TITAN-I can at least be rated at a level 3 of safety assurance. For the TITAN-II aqueous loop-in-pool design, the key passive feature is the complete submersion of the fusion power core and the corresponding primary coolant loop system into a pool of low temperature water. Based on this key safety design feature, the TITAN-II design can be rated at a level 2 of safety assurance. (orig.)

A study on quantitative V and V of safety-critical software

International Nuclear Information System (INIS)

Eom, H. S.; Kang, H. G.; Chang, S. C.; Ha, J. J.; Son, H. S.

2004-03-01

Recently practical needs have required quantitative features for the software reliability for Probabilistic Safety Assessment which is one of the important methods being used in assessing the overall safety of nuclear power plant. But the conventional assessment methods of software reliability could not provide enough information for PSA of NPP, therefore current assessments of a digital system which includes safety-critical software usually exclude the software part or use arbitrary values. This paper describes a Bayesian Belief Networks based method that models the rule-based qualitative software assessment method for a practical use and can produce quantitative results for PSA. The framework was constructed by utilizing BBN that can combine the qualitative and quantitative evidence relevant to the reliability of safety-critical software and can infer a conclusion in a formal and a quantitative way. The case study was performed by applying the method for assessing the quality of software requirement specification of safety-critical software that will be embedded in reactor protection system

The safety designs for the TITAN reversed-field pinch reactor study

International Nuclear Information System (INIS)

Wong, C.P.C.; Cheng, E.T.; Creedon, R.L.; Hoot, C.G.; Schultz, K.R.; Grotz, S.P.; Blanchard, J.P.; Sharafat, S.; Najmabadi, F.

1988-01-01

TITAN is a study to investigate the potential of the reversed-field pinch concept as a compact, high-power density energy system. Two reactor concepts were developed, a self-cooled lithium design with vanadium structure and an aqueous solution loop-in-pool design, both operating at 18 MW/m 2 . The key safety features of the TITAN-I lithium-vanadium blanket design are in material selection, fusion power core configuration selection, lithium piping connections and passive lithium drain tank system. Based on these safety features and results from accident evaluation, TITAN-I can at least be rated as level 3 of safety assurance. For the TITAN-II aqueous loop-in-pool design, the key passive feature is the complete submersion of the fusion power core and the corresponding primary coolant loop system into a pool of low temperature water. Based on this key safety design feature, the TITAN-II design can be rated as level 2 of safety assurance. 7 refs., 2 figs

Safety evaluation of cosmetics in the EU. Reality and challenges for the toxicologist.

Science.gov (United States)

Pauwels, Marleen; Rogiers, Vera

2004-06-15

Council Directive 76/768/EEC, its seven amendments and 30 adaptations to technical progress form the basis of the cosmetic EU legislation today. There are actually four key principles for safety in the cosmetic legislation. (i) The full responsibility for the safety of cosmetics for human health is placed on the manufacturer, first importer in the EU or marketer. (ii) The safety evaluation of finished products is based on safety of individual ingredients, more specifically on their chemical structure, toxicological profile and their level of exposure. (iii) A compilation of information on each cosmetic product (dossier) must be kept readily available for inspection by the competent authorities of the Member State concerned. This information source, usually called a technical information file (TIF) or product information file/requirements (PIF(R)), contains, as the most important part, the safety assessment of the product undersigned by a competent safety assessor. (iv) The use of validated replacement alternative methods instead of animal testing forms the 4th key principle for safety of cosmetic products on the EU market. The 7th amendment imposes strict deadlines for the abolition of animal in vivo studies on cosmetic ingredients. These legal requirements induce a number of important challenges for the cosmetic industry and more specifically for the toxicologist involved as safety assessor.

A study for safety and health management problem of semiconductor industry in Taiwan.

Science.gov (United States)

Chao, Chin-Jung; Wang, Hui-Ming; Feng, Wen-Yang; Tseng, Feng-Yi

2008-12-01

The main purpose of this study is to discuss and explore the safety and health management in semiconductor industry. The researcher practically investigates and interviews the input, process and output of the safety and health management of semiconductor industry by using the questionnaires and the interview method which is developed according to the framework of the OHSAS 18001. The result shows that there are six important factors for the safety and health management in Taiwan semiconductor industry. 1. The company should make employee clearly understand the safety and health laws and standards. 2. The company should make the safety and health management policy known to the public. 3. The company should put emphasis on the pursuance of the safety and health management laws. 4. The company should prevent the accidents. 5. The safety and health message should be communicated sufficiently. 6. The company should consider safety and health norm completely.

System and safety studies of accelerator driven systems for transmutation. Annual report 2007

Energy Technology Data Exchange (ETDEWEB)

Arzhanov, Vasily; Fokau, Andrei; Persson, Calle; Runevall, Odd; Sandberg, Nils; Tesinsky, Milan; Wallenius, Janne; Youpeng Zhang (Div. of Reactor Physics, Royal Institute of Technology, Stockholm (Sweden))

2008-05-15

Within the project 'System and safety studies of accelerator driven systems for transmutation', research on design and safety of sub-critical reactors for recycling of minor actinides is performed. During 2007, the reactor physics division at KTH has calculated safety parameters for EFIT-400 with cermet fuel, permitting to start the transient safety analysis. The accuracy of different reactivity meters applied to the YALINA facility was assessed and neutron detection studies were performed. A model to address deviations from point kinetic behaviour was developed. Studies of basic radiation damage physics included calculations of vacancy formation and activation enthalpies in bcc niobium. In order to predict the oxygen potential of inert matrix fuels, a thermo-chemical model for mixed actinide oxides was implemented in a phase equilibrium code

The impact of masculinity on safety oversights, safety priority and safety violations in two male-dominated occupations

DEFF Research Database (Denmark)

Nielsen, Kent; Hansen, Claus D.; Bloksgaard, Lotte

2015-01-01

Background Although men have a higher risk of occupational injuries than women the role of masculinity for organizational safety outcomes has only rarely been the object of research. Aim The current study investigated the association between masculinity and safety oversights, safety priority......-related context factors (safety leadership, commitment of the safety representative, and safety involvement) and three safety-related outcome factors (safety violations, safety oversights and safety priority) were administered twice 12 months apart to Danish ambulance workers (n = 1157) and slaughterhouse workers...

Survey of the state of the German safety study

International Nuclear Information System (INIS)

Heuser, F.W.; Kotthoff, K.

1977-01-01

In spring 1976 the Federal Ministry of Research and Technology has ordered a safety study to assess the risk for a nuclear power plant with a PWR. Giving first a survey on the main subtasks of the study the present state of work and some first results are discussed. Assuming a failure of safety systems a core melt event and a subsequent failure of the containment could occur. Corresponding accident sequences are discussed in some detail. Related hereto the results of some calculations for fission product release with respect to different containment failure modes are given. According to the results obtained so far the consequences of a core melt event can essentially be restricted by the retention function of the containment. (orig.) [de

Nuclear Criticality Technology and Safety Project parameter study database

International Nuclear Information System (INIS)

Toffer, H.; Erickson, D.G.; Samuel, T.J.; Pearson, J.S.

1993-03-01

A computerized, knowledge-screened, comprehensive database of the nuclear criticality safety documentation has been assembled as part of the Nuclear Criticality Technology and Safety (NCTS) Project. The database is focused on nuclear criticality parameter studies. The database has been computerized using dBASE III Plus and can be used on a personal computer or a workstation. More than 1300 documents have been reviewed by nuclear criticality specialists over the last 5 years to produce over 800 database entries. Nuclear criticality specialists will be able to access the database and retrieve information about topical parameter studies, authors, and chronology. The database places the accumulated knowledge in the nuclear criticality area over the last 50 years at the fingertips of a criticality analyst

Perceived organizational support for safety and employee safety voice: the mediating role of coworker support for safety.

Science.gov (United States)

Tucker, Sean; Chmiel, Nik; Turner, Nick; Hershcovis, M Sandy; Stride, Chris B

2008-10-01

In the present study, we modeled 2 sources of safety support (perceived organizational support for safety and perceived coworker support for safety) as predictors of employee safety voice, that is, speaking out in an attempt to change unsafe working conditions. Drawing on social exchange and social impact theories, we hypothesized and tested a mediated model predicting employee safety voice using a cross-sectional survey of urban bus drivers (n = 213) in the United Kingdom. Hierarchical regression analysis showed that perceived coworker support for safety fully mediated the relationship between perceived organizational support for safety and employee safety voice. This study adds to the employee voice literature by evaluating the important role that coworkers can play in encouraging others to speak out about safety issues. Implications for research and practice related to change-oriented safety communication are discussed.

Procurement in the Nuclear Industry, Quality, Safety and Decision Making

International Nuclear Information System (INIS)

Jakobsson, Marianne; Svenson, Ola; Salo, Ilkka

2010-03-01

The major purpose of the present study is partly to map and partly to make an analysis of the decision processes in the procurement routines in the nuclear industry in order to provide a basis for: 1. further development of safety inspections about procurements for Swedish Radiation Safety Authority 2. improvements of safety management in connection with procurement within a nuclear-power plant, 3 improvements of procurement routines in general in a nuclear power plant. The procurement processes at a nuclear power plant were analyzed from a decision theoretic perspective. Key staff at the plant was interviewed and written instructions as well as digitalized processes were used in the analysis. The results illustrate the most important moments during the procurement process with descriptions from interviews and documents. The staff at the nuclear power plant used a multi-attribute utility decision theory MAUT-inspired model in evaluation of alternatives and both compensatory (in which negative aspects can be compensated by positive aspects) and non-compensatory (in which certain 'pass' levels of attributes have to be exceeded for a choice) decision rules were used in the procurement process. Not surprising, nuclear safety was evaluated in a non-compensatory manner following regulatory criteria while costs were evaluated in trade-off compensatory rules, which means that a weakness in one consideration might be compensated by strength in another consideration. Thus, nuclear safety above the regulator's and law requirements are not integrated in a compensatory manner when procurement alternatives are evaluated. The nuclear plant assessed an organization's safety culture at an early stage of the purchasing process. A successful and a less successful procurement case were reported with the lessons learned from them. We find that the existing written instructions for purchase were well elaborated and adequate. There is a lack of personal resources when procurement teams

Safety in home care: A research protocol for studying medication management

Directory of Open Access Journals (Sweden)

Easty Anthony

2010-06-01

Full Text Available Abstract Background Patient safety is an ongoing global priority, with medication safety considered a prevalent, high-risk area of concern. Yet, we have little understanding of the supports and barriers to safe medication management in the Canadian home care environment. There is a clear need to engage the providers and recipients of care in studying and improving medication safety with collaborative approaches to exploring the nature and safety of medication management in home care. Methods A socio-ecological perspective on health and health systems drives our iterative qualitative study on medication safety with elderly home care clients, family members and other informal caregivers, and home care providers. As we purposively sample across four Canadian provinces: Alberta (AB, Ontario (ON, Quebec (QC and Nova Scotia (NS, we will collect textual and visual data through home-based interviews, participant-led photo walkabouts of the home, and photo elicitation sessions at clients' kitchen tables. Using successive rounds of interpretive description and human factors engineering analyses, we will generate robust descriptions of managing medication at home within each provincial sample and across the four-province group. We will validate our initial interpretations through photo elicitation focus groups with home care providers in each province to develop a refined description of the phenomenon that can inform future decision-making, quality improvement efforts, and research. Discussion The application of interpretive and human factors lenses to the visual and textual data is expected to yield findings that advance our understanding of the issues, challenges, and risk-mitigating strategies related to medication safety in home care. The images are powerful knowledge translation tools for sharing what we learn with participants, decision makers, other healthcare audiences, and the public. In addition, participants engage in knowledge exchange

New Ways of Working and Organization: Alternative Agrifood Movements and Agrifood Researchers

Science.gov (United States)

Friedland, William H.

2010-01-01

The remarkable growth of alternative agrifood movements--organics, fair trade, localism, Slow Food, farmers' markets, community-supported agriculture, food security, food safety, food sovereignty, anti-genetically modified organisms, animal welfare, and others--and their attraction to younger academic scholars offer a unique opportunity to explore…

Safety studies concerning nuclear power reactors

International Nuclear Information System (INIS)

Bailly, Jean; Pelce, Jacques

1980-01-01

The safety of nuclear installations poses different technical problems, whether concerning pressurized water reactors or fast reactors. But investigating methods are closely related and concern, on the one hand, the behavior of shields placed between fuel and outside and, on the other, analysis of accidents. The article is therefore in two parts based on the same plan. Concerning light water reactors, the programme of studies undertaken in France accounts for the research carried out in countries where collaboration agreements exist. Concerning fast reactors, France has the initiative of their studies owing to her technical advance, which explains the great importance of the programmes under way [fr

Potency Of Bacteriocin For Animal Health And Food Safety

Directory of Open Access Journals (Sweden)

Siti Chotiah

2013-06-01

Full Text Available The emergence of antibiotic resistance in many bacteria related to animal and public health stresses the importance of decreasing the use of antibiotics in animal production. The reduction of antibiotic application in livestock can only be achieved if alternative antimicrobial strategies are available. A number of strategies have been explored to control microbial pathogens and to improve growth and feed efficiency in livestock without the use of antibiotics. Bacteriocins have been more extensively studied and proposed as potential alternatives to conventional antibiotics in animal husbandry. Bacteriocins are antimicrobial peptides ribosomally synthesized by many species of Bacteria and some strains of Archaea. In general, bacteriocins just exhibited bactericidal or bacteriostatic activity against other bacteria that are closely related to the producing strain. The main mechanisms of bacteriocin activity vary from pore formation in cytoplasmic membranes to the inhibition of cell wall biosynthesis and enzyme activities (RNAse or DNAse in target cells. The use of bacteriocins in probiotic applications, as preservatives, and most excitingly as alternatives to conventional antibiotics is being broadly explored and studied. This review will describe the bacteriocins potency for animal health and food safety, as well as the results of bacteriocin study that had been conducted in Indonesia.

Immunogenicity of biologically-derived therapeutics: assessment and interpretation of nonclinical safety studies.

Science.gov (United States)

Ponce, Rafael; Abad, Leslie; Amaravadi, Lakshmi; Gelzleichter, Thomas; Gore, Elizabeth; Green, James; Gupta, Shalini; Herzyk, Danuta; Hurst, Christopher; Ivens, Inge A; Kawabata, Thomas; Maier, Curtis; Mounho, Barbara; Rup, Bonita; Shankar, Gopi; Smith, Holly; Thomas, Peter; Wierda, Dan

2009-07-01

An evaluation of potential antibody formation to biologic therapeutics during the course of nonclinical safety studies and its impact on the toxicity profile is expected under current regulatory guidance and is accepted standard practice. However, approaches for incorporating this information in the interpretation of nonclinical safety studies are not clearly established. Described here are the immunological basis of anti-drug antibody formation to biopharmaceuticals (immunogenicity) in laboratory animals, and approaches for generating and interpreting immunogenicity data from nonclinical safety studies of biotechnology-derived therapeutics to support their progression to clinical evaluation. We subscribe that immunogenicity testing strategies should be adapted to the specific needs of each therapeutic development program, and data generated from such analyses should be integrated with available clinical and anatomic pathology, pharmacokinetic, and pharmacodynamic data to properly interpret nonclinical studies.

The surrounding concrete structure of the containment as a safety component

International Nuclear Information System (INIS)

Alex, H.; Kuntze, W.M.

1978-01-01

This paper will briefly discuss the containments of the various types of reactors in the Federal Republic of Germany and will try to show the importance of the surrounding concrete structures with respect to safety. It will be seen that the surrounding concrete structures serve in any case - as protection against external events - as secondary shielding and must therefore be considered as a passive safety feature. The design requirements for the surrounding concrete structures with respect to protection against external events and to physical protection generally supplement each other. Reference will be made to possible alternatives, which might result from studies of underground siting of nuclear power plants. Whether or not this type of construction can lead to additional safety can only be judged when the results of all these studies - some of which are still under way - are evaluated. The concluding part of this paper will deal with the responsibilities of the civil engineering supervisory authorities and the nuclear licensing authorities with respect to the surrounding concrete structures. (orig.) [de

Criticality safety (prospect of study in NUCEF)

International Nuclear Information System (INIS)

Itagaki, Masafumi

1996-01-01

Experimental studies of criticality safety are under way using STACY and TRACY in NUCEF. Collection of fundamental data on criticality in a solution system is undergoing with STACY to confirm that the likelihood of criticality safety in the system constructed on the assumption of apparatuses in a reprocessing plant is enough large. Whereas some experiments simulating criticality accidents in a reprocessing plant using TRACY were designed to investigate the behaviors of fuel solution and radioactive matters in order to clarify whether it is possible to safely shut them in the facility even if a critical accident occurs. Both STACY and TRACY reached the criticality in 1995. Up to now a series of criticality experiments have been done using STACY with a core tank φ60 cm and the first periodical examination is now under way. On the other hand, we have a plan using TRACY to investigate the behaviors of nuclear heat solution at a criticality accident, and the releasing, transfer and deposition of radioactive materials. After reaching the criticality for the first, the performance verification test has been conducted. The full-scale study using TRACY is planned to begin in the second half of 1996. (M.N.)

'BeSAFE', effect-evaluation of internet-based, tailored safety information combined with personal counselling on parents' child safety behaviours: study design of a randomized controlled trial

Directory of Open Access Journals (Sweden)

van Beeck Eduard F

2010-08-01

Full Text Available Abstract Background Injuries in or around the home are the most important cause of death among children aged 0-4 years old. It is also a major source of morbidity and loss of quality of life. In order to reduce the number of injuries, the Consumer Safety Institute introduced the use of Safety Information Leaflets in the Netherlands to provide safety education to parents of children aged 0-4 years. Despite current safety education, necessary safety behaviours are still not taken by a large number of parents, causing unnecessary risk of injury among young children. In an earlier study an E-health module with internet-based, tailored safety information was developed and applied. It concerns an advice for parents on safety behaviours in their homes regarding their child. The aim of this study is to evaluate the effect of this safety information combined with personal counselling on parents' child safety behaviours. Methods/Design Parents who are eligible for the regular well-child visit with their child at child age 5-8 months are invited to participate in this study. Participating parents are randomized into one of two groups: 1 internet-based, tailored safety information combined with personal counselling (intervention group, or 2 personal counselling using the Safety Information Leaflets of the Consumer Safety Institute in the Netherlands for children aged 12 to 24 months (control group. All parents receive safety information on safety topics regarding the prevention of falling, poisoning, drowning and burning. Parents of the intervention group will access the internet-based, tailored safety information module when their child is approximately 10 months old. After completion of the assessment questions, the program compiles a tailored safety advice. The parents are asked to devise and inscribe a personal implementation intention. During the next well-child visit, the Child Health Clinic professional will discuss this tailored safety information

Safety evaluation review of the prototype license application safety analysis report

International Nuclear Information System (INIS)

1991-08-01

The US Nuclear Regulatory Commission (NRC) staff and consultants reviewed a Prototype License Application Safety Analysis Report (PLASAR) submitted by the US Department of Energy (DOE) for the belowground vault (BGV) alternative method of low-level radioactive waste disposal. In Volume 1 of NUREG-1375, the NRC staff provided the safety review results for an earth-mounded concrete bunker PLASAR. In the current report, the staff focused its review on the design, construction, and operational aspects of the BGV PLASAR. The staff developed review comments and questions using the Standard Review Plan (SRP), Rev. 1 (NUREG-1200) as the basis for evaluating the acceptability of the information provided in the BGV PLASAR. The detailed review comments provided in this report are intended to be useful guidance to facility developers and State regulators in addressing issues likely to be encountered in the review of a license application for a low-level-waste disposal facility. 44 refs

Generating alternative alignments in terrain suitability studies for environmental impact assessments of linear developments

CSIR Research Space (South Africa)

Van Deventer, Heidi

2010-08-01

Full Text Available (EIA). Though legislation requires a screening or scoping of alternative options prior to the EIA, the use of Geographical Information Systems (GIS) is seldom used in generating alternatives through a Terrain Suitability Study (TSS). The inclusion of a...

The safety of meperidine prescribing in older adults: A longitudinal population-based study.

Science.gov (United States)

Friesen, Kevin J; Falk, Jamie; Bugden, Shawn

2016-05-11

Meperidine (pethidine) is an opioid analgesic that offers little advantage relative to other opioids and several disadvantages including limited potency, short duration of action, and the production of a neurotoxic metabolite (normeperidine) with a long half-life. Older adults are more sensitive to meperidine's side effects and may have diminished renal function which leads to the accumulation of normeperidine. The Institute for Safe Medication Practices has suggested avoiding meperidine in older adults, limiting its dose (≤600 mg/day) and duration of use (≤48 h). The objective of this study was to determine the level of meperidine use in older adults and assess the dosage and duration of meperidine with reference to these safety recommendations. A longitudinal study using administrative healthcare data was conducted to examine meperidine utilization and levels of high dose and extended duration prescribing among persons ≥65 years of age between April 1, 2001, and March 31, 2014 in Manitoba, Canada. The number of meperidine prescriptions, users, duration of treatment, defined daily doses (DDD) dispensed and number of prescribers were determined over the study period. In the Manitoba older adult population there was a marked decline in meperidine users and prescriptions from 2001 to 2014. There was an average use of 26.4 (95 % CI 24.0-28.8) DDDs of meperidine per user per year. While only 3.7 % of the prescriptions exceeded the 600 mg maximum daily dose, 96.7 % of prescriptions exceeded the recommended 2 days of therapy. For the remaining users of meperidine, the amount of meperidine used per person rose from 18.98 to 56.14 DDDs/user/year over the study period. The number of prescribers of meperidine declined throughout the study, but low DDD prescribers declined more quickly than high DDD prescribers. While meperidine use has declined, the remaining use appears to be decreasing in safety, with more meperidine prescribed per user. This seems to be driven by

Multi-sectoral action for child safety-a European study exploring implicated sectors.