Risk cognition as a new communication tool for high-tech industries. Comparative analysis between nuclear industry and biotechnology

International Nuclear Information System (INIS)

Steinhaeusler, F.; Wieland, P.

2000-01-01

Concerns of political decision makers, the media, and members of the public with regard to high-tech industries focus upon two main issues: safety and socio-economic impact. In this regard the nuclear industry and biotechnology, commonly associated as 'high risk and low trust situation', face the problems of the assessment of potentially dangerous or negative socio-economic consequences of very improbable risks and the communication with the various audiences. It is common for the national authorities in this case to conduct the process of quantified risk analysis (QRA). Unfortunately, hitherto the communication of the results obtained by QRA to the different non-scientific/non-technical target groups listed above is generally dissatisfactory, resulting in the frequent rejection of nuclear- and biotechnology. The main reason is that it has generally not been recognized that QRA is but the final step in the cognition of risk from both real as well as perceived hazards, preceded by risk estimation (RES) and risk evaluation (REV). RES is largely the scientific identification of hazards leading formally to the assessment of mechanisms of harmful consequences, and latterly to the assessment of the probability of its occurrence. Contrary to that, REV deals with the subjective judgment of the significance of assessed individual and societal risks. As such, REV involves individual cognitions of hazards and risks, such as perceptions, knowledge and understanding. In this paper the role of risk cognition in communicating issues associated with high-tech industrial activities, such as nuclear industry and biotechnology, is discussed. Common factors influencing risk perception are dealt with in a comparative manner in order to draw practically applicable lessons from it. This comparative analysis revealed the following results: (1)QRA-derived risk estimation measures used to quantify the risk from potential hazard associated with high-tech industries per se are not suitable

High-Tech Means High-Efficiency: The Business Case for EnergyManagement in High-Tech Industries

Energy Technology Data Exchange (ETDEWEB)

Shanshoian, Gary; Blazek, Michele; Naughton, Phil; Seese, RobertS.; Mills, Evan; Tschudi, William

2005-11-15

In the race to apply new technologies in ''high-tech'' facilities such as data centers, laboratories, and clean rooms, much emphasis has been placed on improving service, building capacity, and increasing speed. These facilities are socially and economically important, as part of the critical infrastructure for pharmaceuticals,electronics, communications, and many other sectors. With a singular focus on throughput, some important design issues can be overlooked, such as the energy efficiency of individual equipment (e.g., lasers, routers and switches) as well as the integration of high-tech equipment into the power distribution system and the building envelope. Among technology-based businesses, improving energy efficiency presents an often untapped opportunity to increase profits, enhance process control,maximize asset value, improve the work place environment, and manage a variety of business risks. Oddly enough, the adoption of energy efficiency improvements in this sector lags behind many others. As a result, millions of dollars are left on the table with each year ofoperation.

Innovative Behaviour of High-Tech Internationalized Firms: Survey Results from Poland

Directory of Open Access Journals (Sweden)

Krzysztof Wach

2016-09-01

Full Text Available Objective: The aim of the article is to identify and verify the relationship between internationalization and innovativeness as well as innovative behaviour of high-tech businesses in Polish context. Research Design & Methods: A quantitative research design was employed. A survey was conducted on the sample of 263 firms operating in high-tech industries in Poland. To verify the assumed relationships statistical instruments were used, including descriptive statistics, Chi-Square test, the Kruskal-Wallis test and multivariate regression. Findings: The level of innovativeness of investigated hi-tech firms was relatively high. Results suggest that the innovativeness of a business contributes to the intensification of the internationalization process of firms operating in high-tech industries. The regression model confirms the dependence of internationalization on three innovative behaviours, such as the general evaluation of innovativeness of the firm, the pace of innovation diffusion and the number of implemented innovations. Implications & Recommendations: Polish high-tech businesses seem to be relatively well internationalized, especially in comparisons to general business population. Policy makers should continue to support innovativeness of Polish economy, but especia­lly these industries which are highly innovative. Contribution & Value Added: The research presented in the article seems to be one of the first in Poland investigating into internationalization and innovation in high-tech industries. The results are in line with the majority of empirical evidence worldwide. The preliminary link between innovation and internationalization among Polish high–tech businesses was confirmed.

An Optimized Grey Dynamic Model for Forecasting the Output of High-Tech Industry in China

Directory of Open Access Journals (Sweden)

Zheng-Xin Wang

2014-01-01

Full Text Available The grey dynamic model by convolution integral with the first-order derivative of the 1-AGO data and n series related, abbreviated as GDMC(1,n, performs well in modelling and forecasting of a grey system. To improve the modelling accuracy of GDMC(1,n, n interpolation coefficients (taken as unknown parameters are introduced into the background values of the n variables. The parameters optimization is formulated as a combinatorial optimization problem and is solved collectively using the particle swarm optimization algorithm. The optimized result has been verified by a case study of the economic output of high-tech industry in China. Comparisons of the obtained modelling results from the optimized GDMC(1,n model with the traditional one demonstrate that the optimal algorithm is a good alternative for parameters optimization of the GDMC(1,n model. The modelling results can assist the government in developing future policies regarding high-tech industry management.

Valuing carbon assets for high-tech with application to the wind energy industry

International Nuclear Information System (INIS)

Han, Liyan; Liu, Yang; Lin, Qiang; Huang, Gubo

2015-01-01

In contrast to the traditional methods for high-tech evaluation, we introduce a new, more active idea for considering the carbon asset effect, in addition to the economic and technological considerations for strategic significance. The method proposed in this paper considers a reduced amount of carbon emissions, less than that of the current industry baseline, to be an asset that is beneficial to a firm that adopts a new technology. The measured carbon asset values vary across different technologies, in different industries and over time. The new method is applied to the valuing of wind energy technology and uses the Weibull distribution to estimate the wind energy capacity and a concrete sensitivity analysis. These applications support the validity of the new method and show that the impact of the fluctuations of carbon sinks on the values of carbon assets is significantly greater than that of volatility in the production output. The paper also presents some policy recommendations based on the results. - Highlights: • Carbon asset dimension for high-tech evaluation. • Valuing wind energy technology by Weibull distribution. • Greater impact of the carbon sink price on the carbon asset value than that of production output. • The environmental risk could be measured based on the carbon asset assessment.

Agglomeration externalities, market structure and employment growth in high-tech industries: Revisiting the evidence

Directory of Open Access Journals (Sweden)

Cieślik Andrzej

2015-09-01

Full Text Available In this paper we revisit the existing empirical evidence on the effects of various agglomeration externalities and the market structure on employment growth in the high-tech industries of the European Economic Area (EEA. Our study is based on the dynamic panel dataset of two-digit NACE rev 1.1. industries in 285 regions of the European Economic Area for the period 1995-2007. We find that employment growth is negatively related to competition, while localization and urbanization externalities do not seem to affect growth.

High-tech entrepreneurship

DEFF Research Database (Denmark)

Bernasconi, Michel; Harris, Simon; Mønsted, Mette

High-tech businesses form a crucial part of entrepreneurial activity - in some ways representing very typical examples of entrepreneurship, yet in some ways representing quite different challenges. The uncertainty in innovation and advanced technology makes it difficult to use conventional economic...... focuses on the blend of theory and practice needed to inform advanced entrepreneurship students of the specifics of high-tech start-ups. Key topics covered include: uncertainty and innovation; entrepreneurial finance; marketing technological innovations; and high-tech incubation management.......Edited by a multi-national team, it draws together leading writers and researchers from across Europe, and is therefore a must-read for all those involved in advanced entrepreneurship with specific interests in high-tech start-ups....

Skill Acquisition in "High Tech" Export Agriculture: A Case Study of Lifelong Learning in Peru's Asparagus Industry

Science.gov (United States)

Carnoy, Martin; Luschei, Thomas F.

2008-01-01

As one of the world's largest exporters of asparagus, Peru has developed a high-tech system of asparagus production, processing and delivery that requires well-trained and responsive workers. In this study we examine the role of both private and public sectors in preparing workers for the asparagus industry and the implications of this skill…

THE FUNDAMENTALS OF HIGH-TECH SECTOR AND HIGH-TECH COMPANIES OPERATION

Directory of Open Access Journals (Sweden)

Svetlana V. Gavrilova

2014-01-01

Full Text Available The article develops the concept of the«high-tech sector» and the «high-techcompany» as well as their differences and relation. Further the author accounts for the particularities of the high-tech company functioning compared to the common one. Finally the key factors and coreelements of high technology are identified.

Engineering English and the High-Tech Industry: A Case Study of an English Needs Analysis of Process Integration Engineers at a Semiconductor Manufacturing Company in Taiwan

Science.gov (United States)

Spence, Paul; Liu, Gi-Zen

2013-01-01

The global high-tech industry is characterized by extreme competitiveness, innovation, and widespread use of English. Consequently, Taiwanese high-tech companies require engineers that are talented in both their engineering and English abilities. In response to the lack of knowledge regarding the English skills needed by engineers in Taiwan's…

Shaking Up Biotech/Pharma: Can Cues Be Taken from the Tech Industry?

Science.gov (United States)

Wang, C Katherine

2017-06-01

The biotech and pharma (biotech/pharma) industry is in dire need of finding ways to increase efficacy, efficiency, and affordability of its products. The information and technology industry ("tech") industry, which is an industry similarly founded on inventions and innovation, may provide some food for thought. This perspective will demonstrate the shift that biotech/pharma is already making and will propose that the industry has an opportunity to compel change by adopting some aspects of the tech industry with regards to models for technology/product development and leadership attributes.

High-tech entrepreneurship

DEFF Research Database (Denmark)

Bernasconi, Michel; Harris, Simon; Mønsted, Mette

; entrepreneurial finance; marketing technological innovations; and high-tech incubation management. Including case studies to give practical insights into genuine business examples, this comprehensive book has a distinctly 'real-world' focus throughout.Edited by a multi-national team, this comprehensive book......High-tech businesses form a crucial part of entrepreneurial activity - in some ways representing very typical examples of entrepreneurship, yet in some ways representing quite different challenges. The uncertainty in innovation and advanced technology makes it difficult to use conventional economic...... planning models, and also means that the management skills used in this area must be more responsive to issues of risk, uncertainty and evaluation than in conventional business opportunities. Whilst entrepreneurial courses do reflect the importance of high-tech businesses, they often lack the resources...

Innovation, regional development and relations between high- and low-tech industries

DEFF Research Database (Denmark)

Hansen, Teis; Winther, Lars

2011-01-01

The current European policy agenda strongly accentuates the importance of research and development (R&D) as a driver of economic growth. The basic assumption is that high European wage levels make it unlikely that less research-intensive parts of the economy can withstand competition from low......-wage countries with increasingly skilled labour forces. Thus, the inferior growth of the European Union (EU) in the 1990s compared with the USA has been explained by the latter’s higher rate of R&D investments. The paper challenges this rather simplistic view of innovation and examines the regional consequences...... of such policies. EU growth has caught up with that of the USA during recent years and low-tech industries continue to have considerable economic importance in Europe in terms of jobs and value added, especially outside the main growth regions, but also in the major urban regions. Empirical evidence from Denmark...

The Consequences of Commercialization Choices for New Entrants in High-Tech Industries: A Venture Emergence Perspective

DEFF Research Database (Denmark)

Giones, Ferran; Gurses, Kerem

for these different markets. We test our hypotheses on longitudinal dataset of 453 new firms started in 2004 in different high-tech industries in the US. We find that that technology and human capital resources favor the adoption of alternative commercialization strategies; nevertheless, we do not observe significant...... differences in the venture emergence or survival likelihood. Our findings offer a closer view of the venture emergence process of new firms, clarifying the causes and consequences of the technology commercialization choices....

Ecological network analysis for a low-carbon and high-tech industrial park.

Science.gov (United States)

Lu, Yi; Su, Meirong; Liu, Gengyuan; Chen, Bin; Zhou, Shiyi; Jiang, Meiming

2012-01-01

Industrial sector is one of the indispensable contributors in global warming. Even if the occurrence of ecoindustrial parks (EIPs) seems to be a good improvement in saving ecological crises, there is still a lack of definitional clarity and in-depth researches on low-carbon industrial parks. In order to reveal the processes of carbon metabolism in a low-carbon high-tech industrial park, we selected Beijing Development Area (BDA) International Business Park in Beijing, China as case study, establishing a seven-compartment- model low-carbon metabolic network based on the methodology of Ecological Network Analysis (ENA). Integrating the Network Utility Analysis (NUA), Network Control Analysis (NCA), and system-wide indicators, we compartmentalized system sectors into ecological structure and analyzed dependence and control degree based on carbon metabolism. The results suggest that indirect flows reveal more mutuality and exploitation relation between system compartments and they are prone to positive sides for the stability of the whole system. The ecological structure develops well as an approximate pyramidal structure, and the carbon metabolism of BDA proves self-mutualistic and sustainable. Construction and waste management were found to be two active sectors impacting carbon metabolism, which was mainly regulated by internal and external environment.

Human capital in low-tech manufacturing

DEFF Research Database (Denmark)

Hansen, Teis; Winther, Lars; Hansen, Ronnie Fibæk

2014-01-01

An essential feature associated with the rise of the knowledge economy has been the increasing focus on the importance of human capital as a precondition for economic growth. Human capital has been found to have a positive impact on the economic growth of high-tech industries, however, the influe......An essential feature associated with the rise of the knowledge economy has been the increasing focus on the importance of human capital as a precondition for economic growth. Human capital has been found to have a positive impact on the economic growth of high-tech industries, however......, the influence of human capital on the development of low-tech industries is yet to be analysed. This paper provides such an examination of low-tech industries based on an analysis of employment data within manufacturing industries in Denmark in the period 1993–2006. The findings highlight, first, that human...... capital appears to be equally important for economic development in low-tech industries and, second, that the divide between the large urban regions, especially Copenhagen, and the rest of the country plays the primary role in explaining the geography of human capital. These findings stress the relevance...

Effects of an 8-Week Outdoor Brisk Walking Program on Fatigue in Hi-Tech Industry Employees: A Randomized Control Trial.

Science.gov (United States)

Wu, Li-Ling; Wang, Kuo-Ming; Liao, Po-I; Kao, Yu-Hsiu; Huang, Yi-Ching

2015-10-01

Over 73% of hi-tech industry employees in Taiwan lack regular exercise. They are exposed to a highly variable and stressful work environment for extended periods of time, and may subsequently experience depression, detrimental to workers' physiological and mental health. In this cross-sectional survey, the authors explored the effect of an 8-week brisk walking program on the fatigue of employees in the hi-tech industry. The participants, from a hi-tech company in northern Taiwan, were randomly assigned to an experimental group (EG; 41 subjects, Mage = 33.34 ± 6.40) or control group (CG; 45 subjects, Mage = 29.40 ± 3.60). Following the 8-week brisk walking program, the EG showed significantly lower scores for subjective fatigue, working motivation, attention, and overall fatigue. The authors confirmed that the 8-week outdoor brisk walking program significantly improved the level of fatigue among employees of the hi-tech industry. The finding serves as an important reference for health authorities in Taiwan and provides awareness of workplace health promotion in the hi-tech industry. © 2015 The Author(s).

Displacement in new economy labor markets: Post-displacement wage loss in high tech versus low tech cities.

Science.gov (United States)

Davis, Daniel J; Rubin, Beth A

2016-11-01

While scholars and politicians tout education as the salve to employment disruptions, we argue that the geography of the new economy, and the social closure mechanisms that geography creates, may be just as important as individuals' characteristics for predicting post-displacement wage loss (or gain). We use data from the 2012 Displaced Workers ement of the Current Population Survey and from the 2010 United States Census to test hypotheses linking local labor markets in different industrial contexts to post-displacement wage loss. Our results point to age as a closure mechanism, and to the partially protective effect of education in high-tech versus low-tech economic sectors. This study is the first to use national level data to examine how employment in high-tech cities influences post-displacement wages. These findings are relevant both for theorizing about the new economy and for public policy. Copyright © 2016 Elsevier Inc. All rights reserved.

Does the high–tech industry consistently reduce CO{sub 2} emissions? Results from nonparametric additive regression model

Energy Technology Data Exchange (ETDEWEB)

Xu, Bin [School of Statistics, Jiangxi University of Finance and Economics, Nanchang, Jiangxi 330013 (China); Research Center of Applied Statistics, Jiangxi University of Finance and Economics, Nanchang, Jiangxi 330013 (China); Lin, Boqiang, E-mail: bqlin@xmu.edu.cn [Collaborative Innovation Center for Energy Economics and Energy Policy, China Institute for Studies in Energy Policy, Xiamen University, Xiamen, Fujian 361005 (China)

2017-03-15

China is currently the world's largest carbon dioxide (CO{sub 2}) emitter. Moreover, total energy consumption and CO{sub 2} emissions in China will continue to increase due to the rapid growth of industrialization and urbanization. Therefore, vigorously developing the high–tech industry becomes an inevitable choice to reduce CO{sub 2} emissions at the moment or in the future. However, ignoring the existing nonlinear links between economic variables, most scholars use traditional linear models to explore the impact of the high–tech industry on CO{sub 2} emissions from an aggregate perspective. Few studies have focused on nonlinear relationships and regional differences in China. Based on panel data of 1998–2014, this study uses the nonparametric additive regression model to explore the nonlinear effect of the high–tech industry from a regional perspective. The estimated results show that the residual sum of squares (SSR) of the nonparametric additive regression model in the eastern, central and western regions are 0.693, 0.054 and 0.085 respectively, which are much less those that of the traditional linear regression model (3.158, 4.227 and 7.196). This verifies that the nonparametric additive regression model has a better fitting effect. Specifically, the high–tech industry produces an inverted “U–shaped” nonlinear impact on CO{sub 2} emissions in the eastern region, but a positive “U–shaped” nonlinear effect in the central and western regions. Therefore, the nonlinear impact of the high–tech industry on CO{sub 2} emissions in the three regions should be given adequate attention in developing effective abatement policies. - Highlights: • The nonlinear effect of the high–tech industry on CO{sub 2} emissions was investigated. • The high–tech industry yields an inverted “U–shaped” effect in the eastern region. • The high–tech industry has a positive “U–shaped” nonlinear effect in other regions. • The linear impact

Challenges to achievement of metal sustainability in our high-tech society.

Science.gov (United States)

Izatt, Reed M; Izatt, Steven R; Bruening, Ronald L; Izatt, Neil E; Moyer, Bruce A

2014-04-21

Achievement of sustainability in metal life cycles from mining of virgin ore to consumer and industrial devices to end-of-life products requires greatly increased recycling rates and improved processing of metals using conventional and green chemistry technologies. Electronic and other high-tech products containing precious, toxic, and specialty metals usually have short lifetimes and low recycling rates. Products containing these metals generally are incinerated, discarded as waste in landfills, or dismantled in informal recycling using crude and environmentally irresponsible procedures. Low recycling rates of metals coupled with increasing demand for high-tech products containing them necessitate increased mining with attendant environmental, health, energy, water, and carbon-footprint consequences. In this tutorial review, challenges to achieving metal sustainability, including projected use of urban mining, in present high-tech society are presented; health, environmental, and economic incentives for various government, industry, and public stakeholders to improve metal sustainability are discussed; a case for technical improvements, including use of molecular recognition, in selective metal separation technology, especially for metal recovery from dilute feed stocks is given; and global consequences of continuing on the present path are examined.

Best new product development and management practices in Korean high-tech industry

NARCIS (Netherlands)

Song, X.M.; Noh, J.

2006-01-01

This paper investigates critical factors affecting the likelihood of new product success and effective new product development (NPD) models for Korean high-tech firms. Empirical results suggest that successful projects differ from unsuccessful projects in project environment, skills and resources,

Capturing the real value in high-tech acquisitions.

Science.gov (United States)

Chaudhuri, S; Tabrizi, B

1999-01-01

Eager to stay ahead of fast-changing markets, more and more high-tech companies are going outside for competitive advantage. Last year in the United States alone, there were 5,000 high-tech acquisitions, but many of them yielded disappointing results. The reason, the authors contend, is that most managers have a shortsighted view of strategic acquisitions--they focus on the specific products or market share. That focus might make sense in some industries, where those assets can confer substantial advantages, but in high tech, full-fledged technological capabilities--tied to skilled people--are the key to long-term success. Instead of simply following the "buzz," successful acquires systematically assess their own capability needs. They create product road maps to identify holes in their product line. While the business group determines if it can do the work in-house, the business development office scouts for opportunities to buy it. Once business development locates a candidate, it conducts an expanded due diligence, which goes beyond strategic, financial, and legal checks. Successful acquires are focused on long-term capabilities, so they make sure that the target's products reflect a real expertise. They also look to see if key people would be comfortable in the new environment and if they have incentives to stay on board. The final stage of a successful acquisition focuses on retaining the new people--making sure their transition goes smoothly and their energies stay focused. Acquisitions can cause great uncertainty, and skilled people can always go elsewhere. In short, the authors argue, high-tech acquisitions need a new orientation around people, not products.

Studying open innovation collaboration between the high-tech industry and science with linguistic ethnography : Battling over the status of knowledge in a setting of distrust

NARCIS (Netherlands)

De Maeijer, E.D.R.; Van Hout, T.; Weggeman, M.C.D.P.; Post, G.

2016-01-01

Open Innovation collaborations often pit academia against industry. Such inter-organizational collaborations can be troublesome due to different organizational backgrounds. This paper investigates what kind of knowledge a multinational high tech company and a research institute share with each

Comparing open innovation of innovative food SMEs with SMEs in the seed and high- tech industries - an analysis of 15 SMEs in the Netherlands

NARCIS (Netherlands)

Omta, Onno; Fortuin, Frances; Dijkman, Niels

2018-01-01

Various studies have shown that open innovation (OI) has become a basic requirement for the long-term survival of high-tech companies. However, also in an artisanal sector like the food industry OI has become increasingly important. To discover the extent to which innovative food and seed

High-Tech Betrayal: Working and Organizing on the Shop Floor.

Science.gov (United States)

Devinatz, Victor G.

This book, which is based on a 7-month ethnographic study of working conditions and employment practices at a biomedical electronics factory, examines the impact that high tech has had on the relationship between management and workers in the manufacturing industry. The following are among the topics discussed in the book's 10 chapters: (1) the…

High-tech and climate change : promoting the application of enabling and high-tech solutions to reduce GHG emissions : final report

International Nuclear Information System (INIS)

2003-03-01

This report identifies the greenhouse gas (GHG) reducing potential of the high-tech sector with particular reference to the following 5 key technology convergence groups: biotechnology and bio-products; intelligent systems; information and communications technology; advanced materials; and, nanotechnology. It was noted that Canada's efforts to reduce GHG emissions in the abatement of climate change can drive innovation, stimulate economic growth and attain international leadership in technology solutions. Although Canada's strong economic growth has resulted in the creation of more highly skilled jobs, expansion in innovation and new infrastructure, there is a challenge of preserving the environmental and social quality within communities, and ensuring that productivity within companies does not lapse. In response, the government is shaping policy responses that drive innovation, productivity and prosperity and which help Canadian companies capitalize on emerging global opportunities while minimizing environmental and social impacts. This report includes information on climate change and the Kyoto Protocol, Canada's Climate Change Action Plan and the emerging carbon marketplace. It also describes the role of technology innovation and the opportunity of convergence in spurring innovation. Several actions have been proposed to Industry Canada by different technology sectors to help climate change providers generate innovative solutions, commercialize products and expand market presence. This report includes those initiatives which further promote the convergence, growth and development of different enabling and high-tech sectors to develop climate change solutions; promote the opportunities that are emerging to apply innovative high-tech and enabling technologies to reduce GHG emissions; and help Canada meet its Kyoto commitments. 50 refs., 1 tab., 2 figs

Modern information and telecommunication technologies in educational process as the element of ongoing personnel training for high-tech Russian industry

Science.gov (United States)

Matyatina, A. N.; Isaev, A. A.; Samovarschikov, Y. V.

2017-01-01

In the current work the issues of staffing high-tech sectors of Russian industry are considered in the context of global geopolitical instability, the comparative analysis of the age structure of domestic companies with the leading Western industrial organizations was conducted, "growth points" of human resources development were defined. For the purpose of informational and telecommunicational implementation in the educational process the analysis of normative-legal documents regulating the requirements to the electronic educational environment and distance learning technologies is presented. The basic models of distance learning technologies and remote resources as part of teaching materials are used. Taking into account the specifics and requirements of industrial enterprises a number of tools and methodology of e-learning based on the identified needs of the industrial sector were offered. The basis of the proposed model is built on one-parameter model through a three-tier learning: kindergarten - secondary - higher education (professional) where the lifecycle of parameter is a list of the industrial enterprises demands to the educational process.

Finnish High Tech in China - A Study of Business Culture

OpenAIRE

Suhonen, Petri

2013-01-01

The objective of this thesis was to study the challenges caused by differences in Finnish and Chinese business cultures in the high technology industry. The study explains the main characteristics of the Chinese national and business cultures which every company operating in China will be dealing with, and offers examples of how these affect a high tech company. The study was conducted as a case study of a Finnish high technology company running a project in China. The company encountere...

High-tech Entrepreneurship and Growth: Myths and Facts

DEFF Research Database (Denmark)

Neergaard, Helle; Madsen, Henning; Ulhøi, John Parm

2004-01-01

Economic growth depends on the presence of an innovative and dynamic business sector, including the business players' ability to discover and exploit new business opportunities. Consequently, entrepreneurship has received increased attention within industrial policy. Entrepreneurs and their motives...... are, however, just as diverse as the rest of the population, thus making it impossible to apply a 'one-size-fits-all' principle when promoting entrepreneurship. This paper deals with a special kind of entrepreneurs - the high-tech entrepreneurs - in order to puncture the myths concerning their growth...

Pharmacist and Technician Perceptions of Tech-Check-Tech in Community Pharmacy Practice Settings.

Science.gov (United States)

Frost, Timothy P; Adams, Alex J

2018-04-01

Tech-check-tech (TCT) is a practice model in which pharmacy technicians with advanced training can perform final verification of prescriptions that have been previously reviewed for appropriateness by a pharmacist. Few states have adopted TCT in part because of the common view that this model is controversial among members of the profession. This article aims to summarize the existing research on pharmacist and technician perceptions of community pharmacy-based TCT. A literature review was conducted using MEDLINE (January 1990 to August 2016) and Google Scholar (January 1990 to August 2016) using the terms "tech* and check," "tech-check-tech," "checking technician," and "accuracy checking tech*." Of the 7 studies identified we found general agreement among both pharmacists and technicians that TCT in community pharmacy settings can be safely performed. This agreement persisted in studies of theoretical TCT models and in studies assessing participants in actual community-based TCT models. Pharmacists who had previously worked with a checking technician were generally more favorable toward TCT. Both pharmacists and technicians in community pharmacy settings generally perceived TCT to be safe, in both theoretical surveys and in surveys following actual TCT demonstration projects. These perceptions of safety align well with the actual outcomes achieved from community pharmacy TCT studies.

Fuzzy model investic do High-tech projektů

Directory of Open Access Journals (Sweden)

Alžběta Kubíčková

2013-10-01

Full Text Available Purpose of the article: Relations among parameters of High-tech projects are very complex, vague, partially inconsistent and multidimensional. Optimal decisions to invest into High-tech companies require top field experts and knowledgeable investors. Therefore the conventional methods of investments analysis are not relevant. Therefore fuzzy logic is introduced. Methodology/methods: A fuzzy knowledge base is a flexible framework for acquisition of vague inconsistent knowledge items which are typical for knowledge economics and consequently for High-tech projects. The pooling of the records and / or observations represents a trade-off between minimal modification of the original data and elimination of inconsistencies among available sets of data. Scientific aim: The paper presents a detailed description of fuzzy model of investment decision making into High-tech firm’s projects. A set of conditional statements was used to formalize the effects of selected variables on investment feasibility of High-tech projects. The main aim is to quantify feasibilities of High-tech projects risk investors make good /not bad decisions. Findings: A set of 50 observations of High-tech companies was transformed into a set of 50 conditional statements using 14 variables. The result is the fuzzy model, which can be used to answer investors’ queries. Two queries are answered and presented in details as an example and as a nucleus of a fuzzy dialogue investor – computer. Conclusions: The main problem is the sparseness of the fuzzy model. Many fuzzy similarities are relatively low and the decision process is therefore often problematic. A much more complex set of variables must be applied to specify the fuzzy model to increase reliability of predictions and decisions.

Educating Students to Boost Innovation and High-tech Entrepreneurship

DEFF Research Database (Denmark)

Berg, Rolf Henrik

. A key challenge faced by entrepreneurs aiming at starting their “own” high-tech company is the high costs and, thereby, the difficulty of accessing appropriate amount of financing without quickly losing ownership and hence incentive in their business. One possible solution is customer-based financing...... something with a culture, something that permeates the way one thinks of. Educating students in an innovative research environment is key to inspiring them to think commercially. It is in this light, among others, that one should view the advantages of close collaboration between academia and industry...

The Methodical Instrumentarium for Analytical Monitoring of Markets for High-Tech Products

Directory of Open Access Journals (Sweden)

Mikaelian Suren G.

2017-10-01

Full Text Available The article is aimed at clarifying the essential characteristics of high-tech products and specifying the features of analytical monitoring of markets for high-tech products. The conceptual approaches to interpretation of the essence of high-tech products as a basic concept in the categorical apparatus for researching the systemic and complex processes of technological development have been clarified. The most efficient instruments for assessing innovation processes in the high-tech sphere have been systematized. The methodical instrumentarium for analytical monitoring of the markets for high-tech products has been clarified. The terminology of a high-tech product has been clarified in order to formulate the methodical instrumentarium for analytical monitoring of market for high-tech products. It has been determined that «high-tech products» are the original basic concept in the categorical apparatus for researching the systemic and complex processes of the high-tech market that needs to be concretized. Conceptual approaches to the essence of high-tech products have been systematized.

PREFACE: Modern Technologies in Industrial Engineering (ModTech2015)

Science.gov (United States)

Oanta, E.; Comaneci, R.; Carausu, C.; Placzek, M.; Cohal, V.; Topala, P.; Nedelcu, D.

2015-11-01

The dominant feature of the current stage of society development is the update, refinement and innovation of the technological processes and products whose ultimate goal is to satisfy the market requirements. New and modern technologies should be considered in terms of their applicability in industry while the materials can lead to an increase in the quality of the end products. Replacing the existing technologies with innovative and eco-efficient technologies can contribute to an added value increase in the production of new materials. Materials are one of the most dynamic and prospective fields, with applications in all other fields. The development of new advanced materials and technologies shall contribute to the procurement of a wide range of reliable products, with competitive prices and worldwide performance, high sensitivity and functionality, user-friendly and reduced energy consumption, for different industrial applications. Research in the field of advanced/intelligent materials supposes a fundamental, experimental, laboratory and technological research and its approach has to be linked to the application. This involves, even for the niche fields, complex projects which result in scientific issues in top journals, patents and functional models. The third edition of ModTech International Conference was held in Mamaia, Romania, between June 17-20, with the Professional Association in Modern Manufacturing Technologies, ModTech, as main organizer, and the Constanta Maritime University, Constanta, Romania, Silesian University of Technology, Gliwice, Poland, the Technical University of Chisinau, Republic of Moldova and the Donetsk National Technical University, Donetsk, Ukraine as co-organizers. The ModTech2015 International Conference brought together representatives of technology and materials manufacturers, various universities, professional associations and research institutes that exchanged the latest knowledge on the conference topics. This edition was

Proposing a Qualitative Approach for Corporate Competitive Capability Modeling in High-Tech Business (Case study: Software Industry

Directory of Open Access Journals (Sweden)

Mahmoud Saremi Saremi

2010-09-01

Full Text Available The evolution of global business trend for ICT-based products in recent decades shows the intensive activity of pioneer developing countries to gain a powerful competitive position in global software industry. In this research, with regard to importance of competition issue for top managers of Iranian software companies, a conceptual model has been developed for Corporate Competitive Capability concept. First, after describing the research problem, we present a comparative review of recent theories of firm and competition that has been applied by different researchers in the High-Tech and Knowledge Intensive Organization filed. Afterwards, with a detailed review of literature and previous research papers, an initial research framework and applied research method has been proposed. The main and final section of paper assigned to describing the result of research in different steps of qualitative modeling process. The agreed concepts are related to corporate competitive capability, the elicited and analyzed experts Cause Map, the elicited collective causal maps, and the final proposed model for software industry are the modeling results for this paper.

IMPROVING THE EFFICIENCY OF THE STATE FINANCIAL CONTROL IN THE SPHERE OF HIGH-TECH MILITARY-INDUSTRIAL COMPLEX

Directory of Open Access Journals (Sweden)

Anzhela Zakhitovna Namitulina

2016-01-01

Full Text Available The presented research topic is particularly relevant due to the high value and the need to strengthen fi nancial control for the development of the military-industrial complex (MIC, to ensure the country's economic security, preservation and development of scientifi c and technical potential. The urgency of acquiring those aspects of economic relations which are connected with the supply the export of high-tech military products in a limited budget funding State should have levers of infl uence on the functioning of the military-industrial complex, the ability to pursue an independent foreign military-technical policy. In the new economic conditions, it became necessary to address the problems of fi nancial security of the defense-industrial complex, in order to strengthen the independence and security of Russia, as well as the need to give priority nature of the measures of state control in the economy related to the implementation of the defense order, ie, in the sphere of military-industrial complex. At the present stage of economic development of Russia, the rate of growth of the national economy largely depends on what the situation is in the military-industrial complex (MIC. This is due to the fact that the defense industry is the most high-quality, high-tech economy. It concentrated the largest part of the Russian potential, the best staff of scientists and experts. Products and DIC technology widely used in other industries. The modern military-industrial complex produces a signifi cant part of civil production. DIC integration with civilian industries – it is also a technological basis for solving the basic problems currently facing the Russian economy, and, above all, the basis of the formation of a new technological basis for the development of high technology and competitive products, which determines the pace of scientifi c and technological progress and the growth of the national economy. Objectives. The aim of the paper is the

FinTech in Norway : the effect of FinTech on the traditional Norwegian banking sector

OpenAIRE

Omreng, Stian; Gjendem, Ida

2017-01-01

The purpose of this thesis is to investigate the effect of FinTech on the Norwegian banking industry. We investigate the drivers of FinTech, the current and potential Norwegian FinTech market, and the international competitiveness of the Norwegian FinTech movement. We identify nine segments of FinTech within the traditional banking functions Financing, Asset management, Payments and Authentication, and we find the key drivers behind the rapid growth of the FinTech market as cha...

Design of high performance mechatronics high-tech functionality by multidisciplinary system integration

CERN Document Server

Munnig Schmidt, R; Rankers, A

2014-01-01

Since they entered our world around the middle of the 20th century, the application of mechatronics has enhanced our lives with functionality based on the integration of electronics, control systems and electric drives.This book deals with the special class of mechatronics that has enabled the exceptional levels of accuracy and speed of high-tech equipment applied in the semiconductor industry, realising the continuous shrink in detailing of micro-electronics and MEMS.As well as the more frequently presented standard subjects of dynamics, motion control, electronics and electromechanics, this

Reconciliation of high-tech and high-touch for SME innovation performance in Indonesia

OpenAIRE

RIDUAN R.

2017-01-01

The euphoria of technology in the Internet of Things (IOT) era is not only more advantageous but also provides double-edged sword effect for high-tech SMEs. In general, high-tech SMEs have a dependence on technology and neglect high touch aspect capacity to build relationships with human resources. Ironically, it is otherwise allegedly in an action as it is assumed to cause innovation imbalance where the product of SME innovation is high-tech but low-touch. Given its importance, this study ai...

An Augmented Common Weight Data Envelopment Analysis for Material Selection in High-tech Industries

Directory of Open Access Journals (Sweden)

Iman Shokr

2016-08-01

Full Text Available Material selection is a challenging issue in manufacturing processes while the inappropriate selected material may lead to fail the manufacturing process or end user experience especially in high-tech industries such as aircraft and shipping. Every material has different quantitative and qualitative criteria which should be considered simultaneously when assessing and selecting the right material. A weighted linear optimization method (WLOM in the class of data envelopment analysis which exists in literature is adopted to address material selection problem while accounting for both qualitative and quantitative criteria. However, it is demonstrated the adopted WLOM method is not able to produce a full ranking vector for the material selection problems borrowed from the literature. Thus, an augmented common weight data envelopment analysis model (ACWDEA is developed in this paper with the aim of eliminating deficiencies of WLOM model. The proposed ACWDEA is able to produce full ranking vector in decision making problems with less computational complexities in superior to the WLOM. Two material selection problems are solved and results are compared with WLOM and previous methods. Finally, the robustness and effectiveness of the proposed ACWDEA method are evaluated through Spearman’s correlation tests.

Actions on climate change, Intended Reducing carbon emissions in China via optimal industry shifts: Toward hi-tech industries, cleaner resources and higher carbon shares in less-develop regions

International Nuclear Information System (INIS)

Fu, Xue; Lahr, Michael; Yaxiong, Zhang; Meng, Bo

2017-01-01

This paper uses an optimal interregional input-output model to focus on how interregional industrial shifts alone might enable China to reduce carbon intensity instead of national shifts. The optimal industry shifts assure integration of all regions by regional products and goods in which carbon emissions are embodied via energy consumption. Generally speaking, high-tech industries concentrate in affluent regions to replace construction. Selected services increase output shares across most of regions. Meanwhile, energy-intensive manufacturing, rather than agriculture, decrease their shares to achieve the national annual growth constrained by nation’s carbon targets. Due to the need to decelerate energy use, carbon intensity goal puts particularly extreme pressure on less-developed regions to shutter heavy industries. Explicit shifts toward cleaner resources and renewable energy appear to be quite important for coal mines in Central China. - Highlights: • The model optimizes GDP constrained by industry-based emissions targets. • Scenario on carbon intensity, growth rate, energy mix, and technology advance. • Interregional I-O table informs technology, industry mix, and interregional trade. • China could raise the output of high-tech in South Coast and of selected services. • Shifts toward cleaner resources and renewable energy are important in the Central.

Nalco Fuel Tech

Energy Technology Data Exchange (ETDEWEB)

Michalak, S.

1995-12-31

The Nalco Fuel Tech with its seat at Naperville (near Chicago), Illinois, is an engineering company working in the field of technology and equipment for environmental protection. A major portion of NALCO products constitute chemical materials and additives used in environmental protection technologies (waste-water treatment plants, water treatment, fuel modifiers, etc.). Basing in part on the experience, laboratories and RD potential of the mother company, the Nalco Fuel Tech Company developed and implemented in the power industry a series of technologies aimed at the reduction of environment-polluting products of fuel combustion. The engineering solution of Nalco Fuel Tech belong to a new generation of environmental protection techniques developed in the USA. They consist in actions focused on the sources of pollutants, i.e., in upgrading the combustion chambers of power engineering plants, e.g., boilers or communal and/or industrial waste combustion units. The Nalco Fuel Tech development and research group cooperates with leading US investigation and research institutes.

2009 Navy ManTech Project Book

Science.gov (United States)

2009-01-01

build a hybrid laser / GMAW system that combined deep keyhole penetration of laser welding with the high metal deposition rate of GMAW, enabling...committed to the successful outcome of the ManTech project. In addition, this close working relationship between the parties provides ManTech with a longer...the cost and time to build and repair Navy ships. The Center works closely with the Navy’s acquisition community and the shipbuilding industry to

Empirical analysis about the influencing factors of municipal project financing in high-tech industry development zone%高新技术产业开发区市政工程融资的影响因素实证分析

Institute of Scientific and Technical Information of China (English)

廖慧

2013-01-01

文章基于高新技术产业开发区市政工程融资问题的实际情况，构建了其融资影响因素模型，运用结构方程模型并借助相关调研数据，对高新区市政工程融资的影响因素展开了实证，从多角度提出了推进高新区市政工程开发的融资策略。%Based on the actual situation of financing problems of municipal engineering in high-tech industrial development zone,this paper constructed model to analyse the influencing factors of financing.According to structural equation model and corresponding survey data,influencing factors of municipal project financing in high-tech industry development zone were demonstrated,financing tactics of improving the development of municipal project in high-tech industry development zone are provided from multiple point of view.

The design of high performance mechatronics high-tech functionality by multidisciplinary system integration

CERN Document Server

Munnig Schmidt, R; van Eijk, J

2011-01-01

Since they entered our world around the middle of the 20th century, the application of mechatronics has enhanced our lives with functionality based on the integration of electronics, control systems and electric drives. This book deals with the special class of mechatronics that has enabled the exceptional levels of accuracy and speed of high-tech equipment applied in the semiconductor industry, realising the continuous shrink in detailing of micro-electronics and MEMS. As well as the more frequently presented standard subjects of dynamics, motion control, electronics and electromechanics, thi

The Danish fabricated metal industry:

DEFF Research Database (Denmark)

Hansen, Teis

2010-01-01

This paper aims to contribute to the knowledge on innovation processes in low- and medium-low-tech industries. Today, industries characterised as high-tech are perceived to be central to economic development, as the research intensity shields them from competition from low-wage countries....... This is less the case for low-tech industries, but their economic importance continues to be large, however. It is thus interesting to analyse how they manage to remain competitive. The analysis focuses on a case study of the fabricated metal industry by identifying the innovation strategies followed by firms...... located in a part of Jutland, where this industry has experienced growth. It is found that the ability to create tailor-made solutions is central to the competitiveness of these medium-low-tech firms. Knowledge is thus highly important, yet in different ways than for high-tech industries. This illustrates...

Pricing Policy and Strategies for Consumer High-Tech Products

Directory of Open Access Journals (Sweden)

Dovleac, L.

2014-06-01

Full Text Available This paper highlights the complex process of price setting for consumer high-tech products. These prices are highly influenced by some external factors from the economic and social environment. The main objective of this paper is to establish the most effective pricing policies and strategies used by high-tech companies of various sizes. Decisions about price fixing for consumer high-technology products are largely influenced by consumer behaviour, too.

OPERATION OF NEW AND HIGH-TECH DEVELOPMENT ZONE – “CHINA-SINGAPORE SUZHOU INDUSTRIAL PARK”

Directory of Open Access Journals (Sweden)

Qi Ji.

2017-01-01

Full Text Available Systematic work of the higher authorities of China on achievement and implementation of generally valid aims in the field of science and technology allowed the People’s Republic of China to reach intense innovative advancement of its conomy. New and High-Tech Development Zones form the basis of the national innovative infrastructure in China, the most successful of which is China-Singapore Suzhou Industrial Park (hereinafter – the Park. The Park can be characterized as a flagship project of cooperation between the governments of China and Singapore, pilot zone of reforms and innovations, successful model of international cooperation. The aim of the foundation and development of the Park is creation of innovative world class productions and setting up new international district with modern information and technology infrastructure and environmentally-friendly neighborhood. The article presents the process of formation of the Park’s management system and its interaction with the public authorities as well as the main principles of its organizational structure. Current social-economic development results and advancement of favorable conditions for investors are analyzed. Special emphasis is given to the concept of development of the industrial ecology observed by the Park’s management. The examples of intensive growth of infrastructure are given: creation of demonstration zones and experimental areas, building of social facilities. The emphasis is given to the constant development of the Park’s human resources. The project represents a new model of international economic and technical cooperation of China with other nations. 

High Touch in a High-Tech World

Science.gov (United States)

Gibson, Cindy L.

2009-01-01

In a world of high tech and low touch, it is easy for public relations programs to stray from tried-and-true interpersonal strategies long associated with solid communication planning. New technologies allow communications professionals to quickly send e-mails and telephone calls to selected groups. Social media sites provide users immediate…

Determinants of the Price of High-Tech Metals: An Event Study

Energy Technology Data Exchange (ETDEWEB)

Wanner, Markus, E-mail: markus.wanner@mrm.uni-augsburg.de; Gaugler, Tobias; Gleich, Benedikt; Rathgeber, Andreas [University of Augsburg, Institute for Materials Resource Management (Germany)

2015-06-15

The growing demand for high-tech products has resulted in strong growth in demand for certain minor metals. In combination with production concentrated in China, this caused strong and unpredicted price movements in recent years. As a result, manufacturing companies have to cope with additional risks. However, the detailed reasons for the price development are only partially understood. Therefore, we analyzed empirically which determinants can be assigned to price movements and performed an event study on the high-tech metals neodymium, indium, and gallium. Based on our dataset of news items, we were able to find coinciding events to almost 90% of all price jumps (recall). We showed that if any information about these events occurred with a probability of over 50% there would also be a price jump within 10 days (precision). However, the classical set of price determinants has to be extended for these specific markets, as we found unorthodox factors like holidays or weather that may be indicators for price movements. Therefore, we hope that our study supports industry for instance in performing more informed short-term planning of metals purchasing based on information about specific events.

Determinants of the Price of High-Tech Metals: An Event Study

International Nuclear Information System (INIS)

Wanner, Markus; Gaugler, Tobias; Gleich, Benedikt; Rathgeber, Andreas

2015-01-01

The growing demand for high-tech products has resulted in strong growth in demand for certain minor metals. In combination with production concentrated in China, this caused strong and unpredicted price movements in recent years. As a result, manufacturing companies have to cope with additional risks. However, the detailed reasons for the price development are only partially understood. Therefore, we analyzed empirically which determinants can be assigned to price movements and performed an event study on the high-tech metals neodymium, indium, and gallium. Based on our dataset of news items, we were able to find coinciding events to almost 90% of all price jumps (recall). We showed that if any information about these events occurred with a probability of over 50% there would also be a price jump within 10 days (precision). However, the classical set of price determinants has to be extended for these specific markets, as we found unorthodox factors like holidays or weather that may be indicators for price movements. Therefore, we hope that our study supports industry for instance in performing more informed short-term planning of metals purchasing based on information about specific events

Sectorial and regional determinants of firm dynamics in developing countries: evidence for low, medium and high tech manufacturing in Argentina

OpenAIRE

Calá, Carla Daniela

2018-01-01

We analyse the determinants of firm dynamics in developing countries using Argentina as an illustrative case. We explain firm entry and exit at the regional level, distinguishing three groups of manufacturing activities: low, medium and high tech. We find that both region -and sector- specific determinants explain firm dynamics, but the impact is not homogeneous across sectors. In particular, for low tech industries, there is a need for explanatory variables that proxy for the specificities o...

Creating a vibrant innovation ecosystem : the High Tech Campus Eindhoven case

NARCIS (Netherlands)

Romme, A.G.L.

2017-01-01

The High Tech Campus Eindhoven is a campus-based ecosystem for high-tech R&D, located in the city of Eindhoven (Netherlands). It is currently home to more than 140 companies and institutions, involving more than 10,000 product developers, researchers, entrepreneurs, and service providers. The

Effectiveness of a physical activity program on weight, physical fitness, occupational stress, job satisfaction and quality of life of overweight employees in high-tech industries: a randomized controlled study.

Science.gov (United States)

Fang, Yun-Ya; Huang, Chien-Yuan; Hsu, Mei-Chi

2018-03-27

This study aimed to examine the effectiveness of a physical activity (PA) program on weight control, physical fitness, occupational stress, job satisfaction and quality of life of overweight and sedentary employees in high-tech industries. Participants in the intervention group (n = 37) were instructed to carry out a PA program at moderate intensity for 60 min/session, 3 sessions/week for 12 weeks. Those in the control group (n = 38) received no PA program and were asked to continue their routine lifestyle. Evaluations were performed at baseline and at the end of the intervention. Results of structured questionnaires and blood biochemistry tests and evaluations of physical fitness were analyzed. The PA program effectively reduced the number of risk factors for metabolic syndrome and body fat percentage, and improved physical fitness such as flexibility, muscular strength and endurance and cardiorespiratory endurance. The intervention also significantly decreased levels of serum triglyceride, total cholesterol and low-density lipoprotein cholesterol. Significant positive effects on work control, interpersonal relationships at work, global job satisfaction and quality of life were also demonstrated. This study showed that a PA program can be helpful in improving physical, physiological and psychological outcomes for overweight and sedentary employees in high-tech industries.

The impact of the degree of application of e-commerce on operational performance among Taiwans high-tech manufacturers

Directory of Open Access Journals (Sweden)

Yi-Chan Chung

2013-11-01

Full Text Available This study probes the correlation of types of operational strategy, degrees of organisational learning, types of organisational culture, the degree of the application of e-commerce, and operational performance among high-tech firms in Taiwan. The data was collected by questionnaires distributed via mail to senior supervisors at high-tech firms in six industries at three Taiwanese science parks. The results showed that a higher degree of e-commerce application leads to a significant and positive effect on operational performance. This study suggests that, in order to upgrade operational performance, firms should enhance their organisational learning and e-commerce, along with their rational, hierarchical, consensual, and developmental cultures, and the execution of prospector and defender strategies.

A multidimensional conspiracy around the software industry: arguments for intervention in high technology sectors

Directory of Open Access Journals (Sweden)

Emerson Wilian Araújo

2010-12-01

Full Text Available This paper analyses the current debate about governmental intervention in high tech industries. On one hand, there are arguments against such interventions that consider the high tech industries as a capital intensive sector; instead of technological intensity, the capital intensity determines the value added. On the other hand, we could prove that there is at least one high tech industry, which is job intensive and non capital intensive, with high value added, that generates several positive externalities (the software industry. Such externalities are important arguments to support governmental intervention in high tech industries and cast doubts on the capital’s value added argument.Este artigo analisa o debate atual relacionado à intervenção estatal nas indústrias de alta intensidade tecnológica. Por um lado, existem argumentos contra tais intervenções que consideram essas indústrias setores também intensivos em capital. Ao contrário do que se pensa, para esta corrente, a intensidade de capital – e não a tecnológica – seria o fator determinante da adição de valor. Por ouro lado, foi possível provar, neste trabalho, que existe ao menos uma indústria de alta intensidade tecnológica, intensiva em trabalho e não em capital, com alto valor adicionado, que gera diversas externalidades positivas em âmbitos social e econômico: a indústria de software. Tais externalidades servem como importantes argumentos para justificar a intervenção estatal em setores de alta intensidade tecnológica e lança dúvidas sobre o argumento da exclusividade do capital como determinante de adição de valor.

Industrial applications of Tenova FlexyTech flame-less low NOx burners

International Nuclear Information System (INIS)

Fantuzzi, M.; Ballarino, L.

2008-01-01

Environmental emissions constraints have led manufacturers to improve their low NO x recuperative burners. The development by Tenova of the FlexyTech Flame-less burners with low NO x emissions, even below the present 'Best Available Technology' limit of 40 ppm at 3% O 2 with furnace temperature 1250 C, air preheat 450 C, is described. The results achieved during the R and D programme have been also improved in the industrial installations. Some details and performances of the recent furnaces equipped with such burners are provided. (authors)

A Study of the Influence of Learning Organization on Organizational Creativity and Organizational Communication in High Tech Technology

Science.gov (United States)

Duan, Qingying

2017-01-01

The value of a high-tech industry no longer lies in the number of plants, equipment, and products but the intellectual property, customer confidence, capability of collaborating with business partners, telecommunication infrastructure, and the creativity potential and skills of its employees. This study is motivated by investigating the way of…

The factors that explain the major agglomeration of the industry of high technology in the north border of Mexico: the case of Matamoros and Reynosa

Directory of Open Access Journals (Sweden)

Jorge Alberto Pérez Cruz

2014-01-01

Full Text Available In the last three decades the geographical distribution of manufacturing change substantially, prompting new concentrations, particularly in the high tech industry. In this sense, the aim of this study is to know and analyze from the perspective of pecuniary and technological externalities factors that explain the change in the agglomeration of high-tech manufacturing. To do so,a questionnaire was applied to 55 manufacturing facilities located in Matamoros andReynosa in Tamaulipas. The results indicate that the highest concentration of high-tech industry has been motivated mainly by the geographic location of the municipalities, access to unskilled labor and cheap availability of urban infrastructure, among others. This means that there is no evidence for the pecuniary and technological externalities determine the agglomeration of high-tech industry in these cities.

Entrepreneurship in high-tech and knowledge-intensive sectors

DEFF Research Database (Denmark)

Christensen, Patrizia V.; Madsen, Henning; Neergaard, Helle

development of new enterprises in high-tech and knowledge-intensive sectors are analysed in relation to the educational and professional background of the entrepreneur/entrepreneurial team, as well as the personal and professional social networks of the entrepreneurs. The analysis is based on a theoretical...... framework combining theories of human and social capital. Secondary aspects addressed in the research project are questions of male vs. female entrepreneurship, internationalisation-globalisation, and business success/failure.......The paper investigates key factors influencing the establishment and early growth of high-tech and knowledge-intensive new firms in Denmark. Particular attention is paid to the human and social variables affecting the creation, survival, and growth of such firms. The establishment and subsequent...

The FinTech phenomenon: antecedents of financial innovation perceived by the popular press

OpenAIRE

Zavolokina, Liudmila; Dolata, Mateusz; Schwabe, Gerhard

2016-01-01

The financial industry has been strongly influenced by digitalization in the past few years reflected by the emergence of 'FinTech,' which represents the marriage of 'finance' and 'information technology.' FinTech provides opportunities for the creation of new services and business models and poses challenges to traditional financial service providers. Therefore, FinTech has become a subject of debate among practitioners, investors, and researchers and is highly visible in the popular media. ...

Tech Prep Compendium of Models. [Revised].

Science.gov (United States)

Delaware Technical and Community Coll., Dover.

This publication discusses four models for technical preparation (tech prep): program organization; student progress; tech prep data collection and evaluation model; and school/community. The program organization model is divided into four sections. Section I, the business industry, and labor section, shows the flow from craft committee and…

The FinTech phenomenon: antecedents of financial innovation perceived by the popular press

OpenAIRE

Zavolokina, Liudmila; Dolata, Mateusz; Schwabe, Gerhard

2016-01-01

The financial industry has been strongly influenced by digitalization in the past few years reflected by the emergence of “FinTech,” which represents the marriage of “finance” and “information technology.” FinTech provides opportunities for the creation of new services and business models and poses challenges to traditional financial service providers. Therefore, FinTech has become a subject of debate among practitioners, investors, and researchers and is highly visible in the popular media. ...

The marketing of high-tech innovation: research and teaching as a multidisciplinary communication task

OpenAIRE

Hasenauer, Rainer; Fi8lo, Peter; Störi, Herbert

2013-01-01

Economically successful high-tech innovation is one of the driving forces for global welfare. Like innovation half-life, break-even time to market or technology acceptance, effective multidisciplinary communication between engineering and marketing is a critical success factor. This paper aims to show the requirements of multidisciplinary communication in B2B marketing of high-tech innovation and methodical approaches in research and academic education: 1. Requirements in high-tech innovat...

MUSEUM GEOLOGI DAN PRASEJARAH DI MAKASSAR DENGAN PENDEKATAN ARSITEKTUR HIGH TECH

Directory of Open Access Journals (Sweden)

Saefullah Saefullah

2015-12-01

Full Text Available Abstrak—Indonesia kaya akan sumber daya geologi yang terdiri dari batuan, mineral dan bahan tambang. Berbicara mengenai geologi sangat erat kaitannya dengan zaman prasejarah.karena belum ditemukannya bukti-bukti tertulis dari zaman prasejarah tersebut, keterangan mengenai zaman ini diperoleh melalui bidang-bidang seperti paleontologi, astronomi, biologi, geologi, antropologi, dan arkeologi pentingnya melestarikan dan menjaga peninggalan-peninggalan prasejarah. Sehingga akan menumbuhkan rasa tanggungjawab terhadapnya. Hal ini sejalan dengan tugas Direktorat Jendral Kebudayaan Kementrian Pendidikan dan Kebudyaaan Indonesia dalam laporan kinerjanya .yang mengemukakan bahwa sisa-sisa peninggalan sejarah penting dipelihara sebagai pelajaran hidup bagi generasi berikutnya.Tujuan penelitian menyusun suatu landasan konseptual desain perancangan Museum Geologi dan prasejarah dengan pendekatan arsitektur high-tech, menerapkan system Double fasade, Ligth Pipe dan system fotovoltaic pada bangunan, mengaplikasikan intelegent system pada utilitas pada bangunan.Hasil Laporan ini adalah mendesain bangunan museum geologi dan prasejarah di Makassar dengan pendekatan arsitektur high-tech. Kata Kunci :Museum geologi, prasejarah, high-tech Abstract-Indonesia is rich geological resources consisting of rocks, minerals and minerals. Talking about the geology is very closely related to prehistoric times because of not finding written evidence from prehistoric times, the information concerning this age obtained through fields like paleontology, astronomy, biology, geology, anthropology, and archeology importance of preserving and maintaining prehistoric relics. So will foster a sense of responsibility to it. This is in line with the duties of the Directorate General of Culture Ministry of Education and Indonesian culture in its performance report which suggested that the remains of important historical remains preserved as a living lesson for the next generation. The

Relationship Between Market Orientation and Business Performance in Czech and German High-Tech Firms

Directory of Open Access Journals (Sweden)

Patrik Jangl

2015-12-01

Full Text Available The main goal of this paper is to find out an index of market orientation, and explore the relationship between four components of market orientation in high-tech firms and their business performance. Business performance was studied as a one-dimensional construct. Market orientation in this study is defined as a process of intelligence generation about customers and competitors, intelligence dissemination and integration within the company across teams, and responsiveness to market intelligence in the form of coordinated action. The statistical sample was represented by 164 Czech and 187 German high-tech firms in the manufacturing industry. Respondents (sales and marketing managers completed a questionnaire and marked their rate of approval with individual statements on a Likert scale ranging from 1 to 7. Market orientation and business performance level was determined as the arithmetic mean (x̄ of the measured values. Depending on the size of the total market orientation index (MOI, Czech (x̄=5.2 and German (x̄=5.14 high-tech firms are medium market-oriented. The business performance index (BPI reached a slightly higher value in Germany (x̄=5.22 as compared to the Czech Republic (x̄=5.13. The main method to reach the target was correlation and regression analysis. This study confirmed a hypothesis about the existence of a correlation between components of market orientation and business performance. Three of the four relationships in the multiple regression model were significant. On the other hand, the study found no positive significant correlation between competitor intelligence generation and business performance.

URBox : High tech energy and informal housing

NARCIS (Netherlands)

Cuperus, Y.J.; Smets, D.

2011-01-01

This paper reports on the URBox concept encompassing the high tech end of solar energy and informal low cost and affordable housing. It aims to contribute to solving the global energy crisis by building solar energy settlements in deserts where land is affordable and sunshine in abundance. First the

Nurturing a FinTech Ecosystem

DEFF Research Database (Denmark)

Leong, Carmen; Tan, Barney; Xiao, Xiao

2017-01-01

Financial technology, or FinTech, involves the design and delivery of financial products and services through technology. It impacts financial institutions, regulators, customers, and merchants across a wide range of industries. Pervasive digital technologies are challenging the fundamentals...... of the highly regulated financial sector, leading to the emergence of non-traditional payment systems, peer-to-peer money exchanges and increased turbulence in currency markets. This case study explores the development of a FinTech company in China that offers microloans to college students. Five lessons...... learned are presented for organizations to better manage the challenges and to leverage the opportunities amidst the disruption of financial sector. Our findings also shed light on how digital technology 1) offers the strategic capability for a firm to occupy a market niche in financial sector, 2) enables...

Stakeholder engagement in patient-centered outcomes research: high-touch or high-tech?

Science.gov (United States)

Lavallee, Danielle C; Wicks, Paul; Alfonso Cristancho, Rafael; Mullins, C Daniel

2014-06-01

Patient and stakeholder engagement enhances the meaningfulness of patient-centered outcomes research. Continuous engagement of diverse patients helps to achieve representativeness and to avoid tokenism, but is perceived as challenging due to resource and time constraints. The widespread availability of the internet, mobile phones, and electronic devices makes 'high-tech' solutions appealing, but such approaches may trade-off larger sample sizes for shallower engagement and/or skewed perspectives if most participants reflect users of technology. More traditional 'high-touch' solutions such as in-person interviews, focus groups, and town hall meetings can provide qualitative and sociological context and potentially more in-depth insights from small numbers of patients, but such approaches are also prone to selection bias as well. We compare and contrast high-tech and high-touch approaches to engaging stakeholders and suggest hybrid processes.

Spatial Planning and High-tech Development A comparative study of Eindhoven city-region, the Netherlands and Hsinchu City-region, Taiwan

Directory of Open Access Journals (Sweden)

Wei-Ju Huang

2013-08-01

firms in the process of high-tech spatial development, because they have access to a wide range of know-how and crucial resources. The creation of new institutional arenas to invite institutes and firms to participate in the process of decision-making is a good strategy for governments, although they must assure that the decision-making process is transparent and accountable, and meets the principles of social justice. Finally, the two cases have shown that a successful high-tech spatial development would have spatial effects on the surrounding areas, such as traffic congestion, imbalance between land supply and demand for housing and/or industrial land, and so on. It is necessary to anticipate and monitor continuously the externalities of the development from a more comprehensive perspective and to leave room for adjustment to the spatial planning and governance approaches. The analytical framework built upon the institutional concepts of Ostrom and Scharpf worked well in this research, but in the process of conducting the empirical study I found that the framework of institutional analysis I established for the empirical study implied a temporarily fixed situation for analysis. Such a framework did create an easier situation for analysis, but proved difficult to use to investigate and explain the dynamic interrelationships between the changing institutional contexts and the decision making of high-tech spatial planning at a specific place and time. While considering this limitation, I adopted a diachronic approach to complement the empirical study of part three, in order to understand the influences of prior institutional developments and specific episodes on later policy/decision making and action taking. In the future, if other studies consider applying the frameworks of this research, the effect of historical path dependency has to be taken into consideration.

MYRRHA a multi-purpose hybrid research reactor for high-tech applications

International Nuclear Information System (INIS)

Abderrahim, H. A.; Baeten, P.

2012-01-01

MYRRHA (Multi-purpose hYbrid Research Reactor for High-tech Applications) is the flexible experimental accelerator driven system (ADS) in development at SCK-CEN. MYRRHA is able to work both in subcritical (ADS) as in critical mode. In this way, MYRRHA will allow fuel developments for innovative reactor systems, material developments for generation IV (GEN IV) systems, material developments for fusion reactors, radioisotope production and industrial applications, such as Si-doping. MYRRHA will also demonstrate the ADS full concept by coupling the three components (accelerator, spallation target and subcritical reactor) at reasonable power level to allow operation feedback, scalable to an industrial demonstrator and allow the study of efficient transmutation of high-level nuclear waste. MYRRHA is based on the heavy liquid metal technology and so it will contribute to the development of lead fast reactor (LFR) technology and in critical mode, MYRRHA will play the role of European technology pilot plant in the roadmap for LFR. In this paper the historical evolution of MYRRHA and the rationale behind the design choices is presented and the latest configuration of the reactor core and primary system is described. (authors)

Patient Autonomy in a High-Tech Care Context - A Theoretical Framework.

Science.gov (United States)

Lindberg, Catharina; Fagerström, Cecilia; Willman, Ania

2018-06-12

To synthesise and interpret previous findings with the aim of developing a theoretical framework for patient autonomy in a high-tech care context. Putting the somewhat abstract concept of patient autonomy into practice can prove difficult since when it is highlighted in healthcare literature the patient perspective is often invisible. Autonomy presumes that a person has experience, education, self-discipline and decision-making capacity. Reference to autonomy in relation to patients in high-tech care environments could therefore be considered paradoxical, as in most cases these persons are vulnerable, with impaired physical and/or metacognitive capacity, thus making extended knowledge of patient autonomy for these persons even more important. Theory development. The basic approaches in theory development by Walker and Avant were used to create a theoretical framework through an amalgamation of the results from three qualitative studies conducted previously by the same research group. A theoretical framework - the control-partnership-transition framework - was delineated disclosing different parts co-creating the prerequisites for patient autonomy in high-tech care environments. Assumptions and propositional statements that guide theory development were also outlined, as were guiding principles for use in day-to-day nursing care. Four strategies used by patients were revealed: the strategy of control, the strategy of partnership, the strategy of trust, and the strategy of transition. An extended knowledge base, founded on theoretical reasoning about patient autonomy, could facilitate nursing care that would allow people to remain/become autonomous in the role of patient in high-tech care environments. The control-partnership-transition framework would be of help in supporting and defending patient autonomy when caring for individual patients, as it provides an understanding of the strategies employed by patients to achieve autonomy in high-tech care contexts. The

The effects of incubation on academic and non-academic high-tech start-ups: evidence from Italy

OpenAIRE

Colombo, Massimo G.; Piva, Evila; Rentocchini, Francesco

2012-01-01

This study aims at empirically investigating whether technology incubators help academic high-tech start-ups to establish collaborations with other organizations, thus increasing the competitiveness of these firms. In doing so, we take into account the specificities of academic high-tech start-ups with respect to their non-academic counterparts. We compare the effects of incubation on academic and non-academic high-tech start-ups through econometric estimates using a large sample of Italian f...

Nederland krijgt belangstelling voor mid tech en low tech kassenbouw (interview met Anne Elings)

NARCIS (Netherlands)

Kierkels, T.; Elings, A.

2013-01-01

Nederland zet de toon in high tech kassenbouw over de hele wereld. Maar in toenemende mate kijken de toeleveringsbedrijven ook naar mogelijkheden binnen het mid tech en zelfs het low tech segment. De Nederlandse overheid ondersteunt demonstratieprojecten in bijvoorbeeld Mexico, Oost-Afrika en

PROBLEMS AND POTENTIAL OF DEVELOPMENT OF THE INDUSTRIAL ENTERPRISES OF THE KNOWLEDGE-INTENSIVE BRANCHES

Directory of Open Access Journals (Sweden)

Mikhail Yakovlevich Veselovsky

2016-01-01

Full Text Available In the article the problems of enterprise development high-tech industries, analyzes the factors that complicate the processes of knowledge-intensive production management. It provided a number of problems that make it difficult to increase the economic efficiency of high-tech industry. To solve the above problems need to increase the investment program and the economic attractiveness of high-tech industries that is to be developed, modern management system, carried out the reform of the knowledge-based industry to provide high levels of efficiency of new organizational structures in the current economic conditions compared to the existing, outdated forms. The purpose / goal. The aim of this study is to analyze the causes that affect the development potential of knowledge-based industries and enterprises identify problems that impede improving the economic efficiency of the Russian high-tech industry. Purpose: To identify the problems that are most difficult to improve the economic efficiency of the Russian high-tech industry; consider the high-tech industry; examine the reasons for the reform of the knowledge-based industry; explore the level of innovation activity of organizations of high-tech industries. Methodology. The methodological and theoretical basis of the study are the works, monographs, research papers, studies of Soviet authors on the development of knowledge-intensive industries, materials of State Statistics. We used scientific methods of research, such as the comparative method of analysis, synthesis, analysis and synthesis. Results. Given the concept of the domestic high-tech complex (NEC, defined the environment in which businesses operate NEC. The features of these companies, where there is the presence of a strong innovation potential. The requirements for knowledge-intensive production as the backbone of a new stage of the development lifecycle. A number of problems hampering the development and transformation of enterprise

Applications of Nuclear Analytical Methods for High Tech Industry

International Nuclear Information System (INIS)

Hossain, T.

2013-01-01

Silicon based semiconductor chip manufacturing is a worldwide high technology industry with numerous measurement issues. One of the major concerns in the semiconductor manufacturing is contamination such as the trace metal impurities. This concern is vividly illustrated by the fact that the manufacturing in this industry is done in ultra clean environment where the entire manufacturing facility or “Fab” is a clean room facility or each and every manufacturing tool is enclosed in a mini-environment Although semiconductor devices are fabricated on the surface of the Si wafers contamination in the bulk material is a major concern. Nuclear methods of analysis are uniquely suited for the contamination analysis in such a matrix. Many opportunities in the semiconductor manufacturing field exist for the nuclear methods to provide support services. Contamination analysis by NAA, depth profiles by NDP and prompt gamma analysis of H in thin films are a few examples. These needs are on-going and require commitment from the lab so that a manufacturing operation can rely on the delivery of these services when required

Global Business Networks and Cooperation within Supply Chain as a Strategy of High-Tech Companies’ Growth

Directory of Open Access Journals (Sweden)

Milena Ratajczak-Mrozek

2012-01-01

Full Text Available Abstract The specificity of the operation profile of high-tech companies, including the necessity of operating at the international scale may account for the fact that these companies may find in network relationships, business networks and cooperation an essential determinant for growth and competitiveness. Foreign entities should be especially interesting business partners for high- tech companies, as they are often seen as representing more advanced knowledge, resources and experience. The aim of the article is to point out to global business networks (i.e. including both local and foreign entities, and especially to cooperation within supply chain, as an important basis for a growth strategy of a high-tech company. The article adopts assumptions of the network approach as a concept of companies cooperation. An analysis of the author’s own as well as secondary empirical research, with the focus on high- tech companies located in Poland is presented. In particular, the data from own research of 62 high-tech companies in Poland conducted in the first half of 2011 is analysed. It shows that the high-tech companies placing great importance on cooperation within supply chain demonstrate a higher growth and level of competitiveness than the companies which do not ascribe such importance (bearing in mind that supply chain forms an important part of a business network.

Virginia Tech to host virtual reality, robotics, and web workshops for middle school students

OpenAIRE

Felker, Susan B.

2004-01-01

Three summer workshops on web development, virtual reality, and robotics will offer aspiring middle school web designers, writers, and computer scientists a high-tech learning adventure designed to teach skills in math, science, computers, and oral and written communication. Virginia Tech's Continuing and Professional Education and the Center for Instructional Technology Solutions in Industry and Education developed the workshops with support from Montgomery County and Salem schools. Classes ...

Safety guide of safe use of industrial radiography

International Nuclear Information System (INIS)

1994-01-01

The objective of this guidance is to present general regulations for the safe use and radiation protection of industrial radiography. Storage and inspection of apparatus, personal instructions for working in radiography facilities are offered

Industrial rag cleaning process for the environmentally safe removal of petroleum-based solvents

International Nuclear Information System (INIS)

Fierro, J.V.

1993-01-01

A process for the cleaning of industrial rags contaminated with environmentally unsafe petroleum-based solvent is described, comprising the step of: (a) placing a load of the industrial rags in a mechanically driven rotary drum; (b) revolving the drum at a high speed sufficient to physically extract liquid petroleum-based solvent contaminate from the industrial rags; (c) routing the extracted petroleum-based solvent contaminate from the rotary drum to a waste solvent collection line for environmentally safe disposal; (d) revolving the rotary drum to cause a tumbling of the industrial rags while maintaining the temperature within the drum at below the flash point of the petroleum-based solvent; (e) intermittently forcing cold air and hot air through the rotary drum to vaporize solvent from the industrial rags; (f) routing the vaporized petroleum-based solvent contaminant from the rotary drum to a condenser wherein the petroleum-based solvent contaminate is condensed and thereafter further routing said condensed solvent to a waste collection line for environmentally safe disposal; and (g) cleaning the industrial rags in the presence of a dry cleaning solvent to remove residual petroleum-based solvents and soil

Exploration of Organizing in Chinese High-Tech Companies Located in Denmark

DEFF Research Database (Denmark)

Westenholz, Ann

Purpose: Very little research has been done to find out what happens to organizing in Chinese companies that are located in countries characterized by cooperative capitalism. I focus on this phenomenon and explore what happens to organizing in two Chinese high-tech companies located in Denmark....... Design/methodology/approach: Case studies, interviewing, and three questions inspired by the work of Boltanski & Thévenot: 1) What type of test scenarios are the Chinese and Danes becoming engaged in? 2) Which worlds are called upon as justification of actions by the Chinese and Danes in the test...... have enacted an industrial world and a civic world. Furthermore, it is suggested that controversies also occur when Chinese managers enact a fuzzy world. Different worlds collide in these types of test scenarios, creating ambiguity about the worth of the persons involved and the organizing principles...

A network analysis using metadata to investigate innovation in clean-tech – Implications for energy policy

International Nuclear Information System (INIS)

Marra, Alessandro; Antonelli, Paola; Dell’Anna, Luca; Pozzi, Cesare

2015-01-01

Clean-technology (clean-tech) is a large and increasing sector. Research and development (R&D) is the lifeline of the industry and innovation is fostered by a plethora of high-tech start-ups and small and medium-sized enterprises (SMEs). Any empirical-based attempt to detect the pattern of technological innovation in the industry is challenging. This paper proposes an investigation of innovation in clean-tech using metadata provided by CrunchBase. Metadata reveal information on markets, products, services and technologies driving innovation in the clean-tech industry worldwide and for San Francisco, the leader in clean-tech innovation with more than two hundred specialised companies. A network analysis using metadata is the employed methodology and the main metrics of the resulting networks are discussed from an economic point of view. The purpose of the paper is to understand specifically specializations and technological complementarities underlying innovative companies, detect emerging industrial clusters at the global and local/metropolitan level and, finally, suggest a way to realize whether observed start-ups, SMEs and clusters follow a technological path of complementary innovation and market opportunity or, instead, present a risk of lock-in. The discussion of the results of the network analysis shows interesting implications for energy policy, particularly useful from an operational point of view. - Highlights: • Metadata provide information on companies' products and technologies. • A network analysis enables detection of specializations and complementarities. • An investigation of the network allows to identify emerging industrial clusters. • Metrics help to appreciate complementary innovation and market opportunity. • Results of the network analysis show interesting policy implications.

Get on Board the Cost Effective Way: A Tech Prep Replication Process.

Science.gov (United States)

Moore, Wayne A.; Szul, Linda F.; Rivosecchi, Karen

1997-01-01

The Northwestern Pennsylvania Tech Prep Consortium model for replicating tech prep programs includes these steps: fact finding, local industry analysis, curriculum development, detailed description, marketing strategies, implementation, and program evaluation. (SK)

Perceptions of Diversity Training Needs in High Tech Business.

Science.gov (United States)

Lieberman, Devorah A.; Gurtov, Ellene

A study questioned 12 human resource personnel, corporation managers, and diversity trainers about their perceptions of diversity training needs in Pacific Northwest high tech organizations. The overarching research questions for the study were as follows: (1) What are the most frequently reported diversity training needs among human resource…

High-tech processing of secondary resources of winemaking

Directory of Open Access Journals (Sweden)

G. Kasyanov

2017-04-01

Full Text Available The information about problems and prospects of development of food production processes based on high-tech and knowledge-intensive technical solutions is presented. To accomplish these objectives the problems of rational growing of grapes, intensive methods of production of conventional and concentrated grape juice, application of CO2ditartration for the removal of wine stone were solved.White and red table grapes, grape pomace, grape seed oil, protein and CO2-meal are the objects of the research. To evaluate the quality of raw materials, intermediate and finished products such devices as gas-liquid and thin-layer chromatography, and spectrophotometer were used. Obtaining of grape juice of white and red grapes with content of tartaric acid salts less than 1 %, food drying products and products of processing of grape pomace are the intermediate results of the research. Grape juice in flexible packages of «Pure-Pak» and «Doy-pack» types, CO2-extracts of seeds and skins of grapes and protein CO2-meal are the final objects of the research. Performed research allows us to make conclusions about expediency of high-tech methods of processing of raw materials for obtaining food products.

Ten Niche Strategies To Commercialize New High-Tech Products

NARCIS (Netherlands)

Ortt, J.R.; Langley, D.J.; Pals, N.

2013-01-01

There are serious gaps in the scientific literature relating to niche strategies as a means for commercializing new high-tech products. In particular, there is no clarity about what types of niche strategies can be distinguished, or how a niche strategy can be selected to suit a certain ituation. In

Determinants of investment in fixed assets and in intangible assets for high-tech firms

Directory of Open Access Journals (Sweden)

Paulo Maçãs Nunes

2017-05-01

Full Text Available Based on a sample of 141 Portuguese high-tech firms for the period 2004-2012 and using GMM system (1998 and LSDVC (2005 dynamic estimators, this paper studies whether the determinants of high-tech firms’ investment in fixed assets are identical to the determinants of their investment in intangible assets. The multiple empirical evidence obtained allows us to conclude that the determinants of their investment in fixed assets are considerably different from those of their investment in intangible assets. Debt is a determinant stimulating investment in fixed assets, with age being a determinant restricting such investment. Size, age, internal finance and GDP are determinants stimulating investment in intangible assets, whereas debt and interest rates restrict such investment. These results let us make important suggestions for the owners/managers of high-tech firms, and also for policy-makers.

Building world-wide nuclear industry success stories - Safe management of nuclear waste and used nuclear fuel

International Nuclear Information System (INIS)

Saint-Pierre, S.

2005-01-01

Full text: This WNA Position Statement summarizes the worldwide nuclear industry's record, progress and plans in safely managing nuclear waste and used nuclear fuel. The global industry's safe waste management practices cover the entire nuclear fuel-cycle, from the mining of uranium to the long-term disposal of end products from nuclear power reactors. The Statement's aim is to provide, in clear and accurate terms, the nuclear industry's 'story' on a crucially important subject often clouded by misinformation. Inevitably, each country and each company employs a management strategy appropriate to a specific national and technical context. This Position Statement reflects a confident industry consensus that a common dedication to sound practices throughout the nuclear industry worldwide is continuing to enhance an already robust global record of safe management of nuclear waste and used nuclear fuel. This text focuses solely on modern civil programmes of nuclear-electricity generation. It does not deal with the substantial quantities of waste from military or early civil nuclear programmes. These wastes fall into the category of 'legacy activities' and are generally accepted as a responsibility of national governments. The clean-up of wastes resulting from 'legacy activities' should not be confused with the limited volume of end products that are routinely produced and safely managed by today's nuclear energy industry. On the significant subject of 'Decommissioning of Nuclear Facilities', which is integral to modern civil nuclear power programmes, the WNA will offer a separate Position Statement covering the industry's safe management of nuclear waste in this context. The safe management of nuclear waste and used nuclear fuel is a widespread, well-demonstrated reality. This strong safety record reflects a high degree of nuclear industry expertise and of industry responsibility toward the well-being of current and future generations. Accumulating experience and

ContiTronic - The intelligent conveyor belt from ContiTech; ContiTronic - Das intelligente Transportband von ContiTech

Energy Technology Data Exchange (ETDEWEB)

Alles, R; Wach, T [ContiTech Transportbandsysteme GmbH, Hannover (Germany)

1998-05-01

ContiTech has investigated the use of RFID (Radio Frequency Identification) and found that specially developed transponders can be vulcanized into rubber conveyor belts without impairing their performance capabilities. The system opens up a whole host of new applications in bulk materials handling within various sectors of industry (mining, steel industry, etc.). With the support of the Cologne-based Rheinbraun AG, the ContiTronic system was tested in lignite mining Operations in Hambach. (orig.) [Deutsch] Untersuchungen bei ContiTech ueber die Radio-Frequenz-Identifikation (RFID) ergaben, dass sich speziell entwickelte Transponder in Gummifoerdergurte einvulkanisieren lassen, ohne dass deren Funktion beeintraechtigt wird. Das System eroeffnet bei der Schuettgutfoerderung in den verschiedensten Industriebereichen (Bergbau, Stahlindustrie usw.) neue Anwendungen. Mit Unterstuetzung der Rheinbraun AG, Koeln, wurde das ContiTronic-System im Braunkohlentagebau Hambach erprobt. (orig.)

The link between organisational citizenship behaviours and open innovation: A case of Malaysian high-tech sector

Directory of Open Access Journals (Sweden)

M. Muzamil Naqshbandi

2016-12-01

Full Text Available We examine the role of organisational citizenship behaviours (OCBs in two types of open innovation—inbound and outbound. Data were collected using the questionnaire survey technique from middle and top managers working in high-tech industries in Malaysia. Results show that OCBs positively predict both inbound and outbound open innovation. A closer look reveals that OCBs relate positively to out-bound open innovation in aggregate and in isolation. However, OCBs relate to in-bound open innovation in aggregate only. The implications of these results are discussed and limitations of the study are highlighted.

Export and Economic Growth in the Case of the Manufacturing Industry: Panel Data Analysis of Developing Countries

Directory of Open Access Journals (Sweden)

Emine Kılavuz

2012-01-01

Full Text Available The correlation between growth in export and economic growth, which is called “Export-led Growth Hypothesis” in the literature, is still a current issue in both the theoretical and empirical literature. In the present study, the effect of different classifications of export and import on economic growth in 22 developing countries in the 1998–2006 period was tested based on two models, via panel data analysis. According to the results of the first model, the analysis of which included variables such as high and low-tech manufacturing industry exports, investment and population, it was found that only two variables, high-tech manufacturing industry export and investment, have a positive and significant effect on growth. In addition to the first model which included the analysis of all variables, the second model investigated the effect of high and low-tech manufacturing industry imports on growth. The findings revealed that only high-tech manufacturing industry export, investment and low-tech manufacturing industry import have a positive and significant effect on growth.

Understanding cross-national trends in high-tech renewable power equipment exports to the United States

International Nuclear Information System (INIS)

Sawhney, Aparna; Kahn, Matthew E.

2012-01-01

We track US imports of advanced technology wind and solar power-generation equipment from a panel of countries during 1989–2010, and examine the determining factors including country size, sector-specific US FDI outflow, and domestic wind and solar power generation. Differentiating between the core high-tech and the balance of system equipment, we find US imports of both categories have grown at significantly higher rate from the relatively poorer countries, and particularly China and India. Larger countries are found to be exporting significantly more, and US FDI is found to play a significant positive role in the exports of high-tech equipment for the poor countries. For the core wind and solar high-tech equipment, we find domestic renewable power generation of the exporting countries also played a significant positive role. - Highlights: ► We track US imports of advanced technology wind and solar power-generation equipment. ► US imports of both categories have grown at significantly higher rate from China and India. ► US FDI is found to play a significant positive role in the exports of high-tech equipment.

What nuclear industry can learn from the digital transformation of high-tech industries

International Nuclear Information System (INIS)

Confais, E.

2017-01-01

The aircraft industry, the oil industry and the shipbuilding industry share with nuclear industry common issues like the importance of security and safety, long investment cycles and a fierce worldwide competition. All these industries can inspire one another to face these challenges with their own use of digital technologies. A common use of digital technologies is to favor innovation and accelerate its implementation in the industrial cycle through the shortening of both the certification step and the upgrading-time of the production line. Innovation requires creativity and creativity needs freedom, digital technologies can favor initiatives by shadowing the traditional hierarchy at opening the company to a new world of ideas. It also appears that digital technologies allows the quick processing of massive volumes of data that could be used for preventive maintenance and the optimization of the equipment. The broad digitalization of the economy has a dark side: the rising of cyber risks and enterprises have to face them which generally implies to rethink security inside the enterprise. Some companies have overhauled their IT department and have segregated and monitored the access to data. (A.C.)

PROCESS MANAGEMENT IN HIGH TECH NEW ZEALAND FIRMS

OpenAIRE

LINCOLN WOOD; QIANG LU

2008-01-01

There are three distinct functions in the product realization chain — product design, process design, and process execution; thus there are two interfaces (product design — process design; process design — process execution) rather than one (product-manufacturing). Case studies of four organizations manufacturing high-tech products in New Zealand are explored to study the organization of process design functions and success strategies. Similarities in structuring, relationships between functi...

Knowledge virtualization and local connectedness among smart high-tech companies

NARCIS (Netherlands)

Van Geenhuizen, M.S.; Nijkamp, P.

2011-01-01

Smart high-tech companies are characterized by knowledge intensity and open innovation. Even when these companies emerge in spatial clusters or dense urban places, they may utilize knowledge networks on a global scale. However, there is not much insight into the factors that shape knowledge

Internationalisation of high-tech start-ups and fast growth-evidence for UK and Germany

OpenAIRE

Bürgel, Oliver; Fier, Andreas; Licht, Georg; Murray, Gordon

2000-01-01

For firms acting in technological niches the expansion into foreign markets can be a way to increase sales and to thus to recover initial sunk costs over a shorter time frame. Our research, based on survey data for nearly 600 British and German high-tech start-ups, examines whether internationalisation leads to faster growth among high-tech start-ups. Results show that firms with international sales have higher sales growth than firms that sell only domestically. We find that technological so...

FUNDAMENTALIZATION OF ICT LEARNING IN MODERN HIGH TECH ENVIRONMENT

Directory of Open Access Journals (Sweden)

M. P. Shyshkina

2013-03-01

Full Text Available The article outlines the features of the process of fundamentalization of ICT learning, educational background to ensure it in high school. The concept of fundamental knowledge and its role in training of a specialist is described. The problems of access to qualitative education, particularly to electronic learning resources in modern high-tech environment are revealed. The role of computer mathematics as a tool of ICT learning fundamentalization is emphasized.

Kalam's visit to cement Indo-Swiss ties in high tech area

CERN Multimedia

Sumir, Paul

2005-01-01

Seeking to boost Indo-Swiss cooperation in high tech areas, President APJ Abdul Kalam arrived in Geneva on a four-day visit to Switzerland aimed at firming up plans for future cooperation with the CERN

Definition of a short-cut methodology for assessing earthquake-related Na-Tech risk

International Nuclear Information System (INIS)

Busini, Valentina; Marzo, Enrico; Callioni, Andrea; Rota, Renato

2011-01-01

Highlights: → In industrial sites located in natural hazard-prone areas technological accidents may be triggered by natural events, generating the so-called Na-Tech accidents. → In this paper, a qualitative screening methodology for assessing the earthquake Na-Tech risk has been developed with the aim of identifying which situations deserve a much more expensive Quantitative Risk Analysis. → The simple procedure developed, which summarizes in a suitable Key Hazard Indicator the Na-Tech risk level, has been validated by comparing its results with those of some Quantitative Risk Analyses involving also Na-Tech events and previously presented in the literature. - Abstract: Na-Tech (Natural and Technological) refers to industrial accidents triggered by natural events such as storms, earthquakes, flooding, and lightning. Herein, a qualitative methodology for the initial assessment of earthquake Na-Tech risk has been developed as a screening tool to identify which situations require a much more expensive Quantitative Risk Analysis (QRA). The proposed methodology, through suitable Key Hazard Indicators (KHIs), identifies the Na-Tech risk level associated with a given situation (i.e., a process plant located in a given territory), using the Analytical Hierarchy Process as a multi-criteria decision tool for the evaluation of such KHIs. The developed methodology was validated by comparing its computational results with QRA results that involved Na-Tech events previously presented in literature.

Optical Fiber High Temperature Sensor Instrumentation for Energy Intensive Industries

Energy Technology Data Exchange (ETDEWEB)

Cooper, Kristie L.; Wang, Anbo; Pickrell, Gary R.

2006-11-14

This report summarizes technical progress during the program “Optical Fiber High Temperature Sensor Instrumentation for Energy Intensive Industries”, performed by the Center for Photonics Technology of the Bradley Department of Electrical and Computer Engineering at Virginia Tech. The objective of this program was to use technology recently invented at Virginia Tech to develop and demonstrate the application of self-calibrating optical fiber temperature and pressure sensors to several key energy-intensive industries where conventional, commercially available sensors exhibit greatly abbreviated lifetimes due primarily to environmental degradation. A number of significant technologies were developed under this program, including • a laser bonded silica high temperature fiber sensor with a high temperature capability up to 700°C and a frequency response up to 150 kHz, • the world’s smallest fiber Fabry-Perot high temperature pressure sensor (125 x 20 μm) with 700°C capability, • UV-induced intrinsic Fabry-Perot interferometric sensors for distributed measurement, • a single crystal sapphire fiber-based sensor with a temperature capability up to 1600°C. These technologies have been well demonstrated and laboratory tested. Our work plan included conducting major field tests of these technologies at EPRI, Corning, Pratt & Whitney, and Global Energy; field validation of the technology is critical to ensuring its usefulness to U.S. industries. Unfortunately, due to budget cuts, DOE was unable to follow through with its funding commitment to support Energy Efficiency Science Initiative projects and this final phase was eliminated.

Working safely in gamma radiography. A training manual for industrial radiographers

International Nuclear Information System (INIS)

McGuire, S.A.; Peabody, C.A.

1982-09-01

This manual is designed for classroom training in working safely in industrial radiography using gamma sources. The purpose is to train radiographers' assistants to work safely as a qualified gamma radiographer. The contents cover the essentials of radiation, radiation protection, emergency procedures, gamma cameras, and biological effects of radiation

Design of Demand Driven Return Supply Chain for High-Tech Products

NARCIS (Netherlands)

Ashayeri, J.; Tuzkaya, G.

2010-01-01

Many high-tech supply chain operate in a context of high process and market uncertainties due to shorter product life cycles. When introducing a new product, a company must manage the cost of supply, including the cost of returns over its short life cycle. The returns distribution looks like a

Working safely in gamma radiography. A training manual for industrial radiographers

Energy Technology Data Exchange (ETDEWEB)

McGuire, S.A.; Peabody, C.A.

1982-09-01

This manual is designed for classroom training in working safely in industrial radiography using gamma sources. The purpose is to train radiographers' assistants to work safely as a qualified gamma radiographer. The contents cover the essentials of radiation, radiation protection, emergency procedures, gamma cameras, and biological effects of radiation. (ACR)

PREFACE: 12th High-Tech Plasma Processes Conference (HTPP-12)

Science.gov (United States)

Gleizes, Alain; Ghedini, Emanuele; Gherardi, Matteo; Sanibondi, Paolo; Dilecce, Giorgio

2012-12-01

The High-Tech Plasma Processes - 12th European Plasma Conference (HTPP-12) was held in Bologna (Italy) on 24-29 June 2012. The conference series started in 1990 as a thermal plasma conference and gradually expanded to include other topic fields as well. Now the High-Tech Plasma Processes - European Plasma Conference (HTPP) is a bi-annual international conference based in Europe with topics encompassing the whole area of plasma processing science. The aim of the conference is to bring different scientific communities together, facilitate the contacts between science, technology and industry and provide a platform for the exploration of both fundamental topics and new applications of plasmas. Thanks to the efforts of the conference chairman, Professor Vittorio Colombo and of the co-chair, Professor Piero Favia, a well balanced participation from both the communities of thermal and nonthermal plasma researchers was achieved; this resulted in just about 196 attendees from 39 countries, with 8 plenary and 15 invited talks, plus 50 oral and 140 poster contributions. This volume of Journal of Physics: Conference Series gathers papers from regular contributions of HTPP-12; each contribution submitted for publication has been peer reviewed and the Editors are very grateful to the referees for their careful support in improving the original manuscripts. In the end, 39 manuscripts were accepted for publication, covering different topics of plasma processing science: from plasma fundamentals and modelling to source design and process diagnostics, from nanomaterial synthesis to surface modification, from waste treatment to plasma applications in a liquid environment. It is an honour to present this volume of Journal of Physics: Conference Series and we deeply thank the authors for their enthusiastic and high-grade contribution. Finally, we would like to thank the conference chairmen, the members of the steering committee, the international scientific committee, the local

A multi-disciplinary and model-based design methodology for high-tech systems

NARCIS (Netherlands)

Heemels, W.P.M.H.; Waal, van de E.; Muller, G.J.

2006-01-01

System architecting for high-tech machines is currently performed by highly experienced individuals, who often use an intuitive approach to their craft. In order to allow better cooperation, and to enable the dissemination of experience and knowledge, a framework is needed in which the methods,

An Integrated Model for Supplier Selection for a High-Tech Manufacturer

Science.gov (United States)

Lee, Amy H. I.; Kang, He-Yau; Lin, Chun-Yu

2011-11-01

Global competitiveness has become the biggest concern of manufacturing companies, especially in high-tech industries. Improving competitive edges in an environment with rapidly changing technological innovations and dynamic customer needs is essential for a firm to survive and to acquire a decent profit. Thus, the introduction of successful new products is a source of new sales and profits and is a necessity in the intense competitive international market. After a product is developed, a firm needs the cooperation of upstream suppliers to provide satisfactory components and parts for manufacturing final products. Therefore, the selection of suitable suppliers has also become a very important decision. In this study, an analytical approach is proposed to select the most appropriate critical-part suppliers in order to maintain a high reliability of the supply chain. A fuzzy analytic network process (FANP) model, which incorporates the benefits, opportunities, costs and risks (BOCR) concept, is constructed to evaluate various aspects of suppliers. The proposed model is adopted in a TFT-LCD manufacturer in Taiwan in evaluating the expected performance of suppliers with respect to each important factor, and an overall ranking of the suppliers can be generated as a result.

Knowledge Organisations and High-Tech Regional Innovation Systems in Developing Countries: Evidence from Argentina

Directory of Open Access Journals (Sweden)

Carolina Pasciaroni

2016-06-01

Full Text Available In the globally and knowledge based economy, the universities and other knowledge organisations are valued for their ability to contribute to the regional innovation processes. This is particularly relevant for the developing countries in South America since their R&D spending is highly concentrated on the public knowledge infrastructure. However, there are few studies examining the role of knowledge organizations at regional level in Latin America. The proposed study aims to analyse the role played by knowledge organisations in the formation of a high-tech Regional Innovation Systems in Argentina. This country has a number of attractive features relative to the positive evolution of its R&D spending and the recent implementation of a policy that promotes cooperation between firms and knowledge organisations among high-tech sectors. As evidenced in developed regions, the organisations under study play a key role in the promotion of a high-tech Regional Innovation Systems. However, this prominent role is not based on those local factors identified in the literature, such as organisational and institutional local assets, but on national science and technology policies and individual initiatives conducted by the faculties involved.

New Technologies and Sustainable Development of Industry; Neue Technologien und nachhaltige Entwicklung der Industrie

Energy Technology Data Exchange (ETDEWEB)

Muggli, Christoph; Baumgartner, Walter; Werner, Frank [Basics AG, Beckenhofstrasse 16, CH-8035 Zurich (Switzerland)

1996-08-01

The present technology assessment study examines the effects of three technology scenarios on future energy consumption and the energy-related emissions by industrial manufacturing in Switzerland. The three paths of development (Trend, High-Tech, Alternative) can be represented as follows: After a reduction until 2015, the Trend development entails a slight increase in consumption of energy. Until then consumption is some 10 percent lower in both the High-Tech and the Alternative Scenarios. Consumption of electricity increases in all scenarios, the proportion is highest in 20 year's time under the High-Tech scenario. SO{sub 2} and CO{sub 2} emissions decrease in all scenarios until 2000 and then level out at a low level. The emissions are lowest in the High-Tech scenario. In contrast the NO{sub x} and the VOC emissions diminish until 2000 and then rise again continuously. At this juncture important bases are still not yet available for a definitive evaluation with respect to the sustainable development. Sustainability objectives are currently being compiled for Switzerland in the wake of the Berlin Climate Conference and the Rio Conference. In the political lobbies the Green factions are making demands, such as those currently under discussion internationally (e.g. CO{sub 2} reductions on a scale of some 80 percent by 2050), whereas conservative and industrial circle representatives support the objective of sustainable development but reject a quantification of objectives. The official objectives of the Swiss Energy 2000 programme can be achieved with all scenarios. With the High-Tech and Alternative scenarios, concepts of a reduction in CO{sub 2} by 20 percent by 2015 (as currently under discussion in Switzerland), are realistic. However, further energy-relevant efficiency potentials in industrial production can be activated by energy-policy motivated measures. More extensive objectives, such as e.g. a CO{sub 2} reduction of 50 percent, are hardly attainable, even

New Technologies and Sustainable Development of Industry; Neue Technologien und nachhaltige Entwicklung der Industrie

Energy Technology Data Exchange (ETDEWEB)

Muggli, Christoph; Baumgartner, Walter; Werner, Frank [Basics AG, Beckenhofstrasse 16, CH-8035 Zurich (Switzerland)

1996-08-01

The present technology assessment study examines the effects of three technology scenarios on future energy consumption and the energy-related emissions by industrial manufacturing in Switzerland. The three paths of development (Trend, High-Tech, Alternative) can be represented as follows: After a reduction until 2015, the Trend development entails a slight increase in consumption of energy. Until then consumption is some 10 percent lower in both the High-Tech and the Alternative Scenarios. Consumption of electricity increases in all scenarios, the proportion is highest in 20 year's time under the High-Tech scenario. SO{sub 2} and CO{sub 2} emissions decrease in all scenarios until 2000 and then level out at a low level. The emissions are lowest in the High-Tech scenario. In contrast the NO{sub x} and the VOC emissions diminish until 2000 and then rise again continuously. At this juncture important bases are still not yet available for a definitive evaluation with respect to the sustainable development. Sustainability objectives are currently being compiled for Switzerland in the wake of the Berlin Climate Conference and the Rio Conference. In the political lobbies the Green factions are making demands, such as those currently under discussion internationally (e.g. CO{sub 2} reductions on a scale of some 80 percent by 2050), whereas conservative and industrial circle representatives support the objective of sustainable development but reject a quantification of objectives. The official objectives of the Swiss Energy 2000 programme can be achieved with all scenarios. With the High-Tech and Alternative scenarios, concepts of a reduction in CO{sub 2} by 20 percent by 2015 (as currently under discussion in Switzerland), are realistic. However, further energy-relevant efficiency potentials in industrial production can be activated by energy-policy motivated measures. More extensive objectives, such as e.g. a CO{sub 2} reduction of 50 percent, are hardly attainable

Forming system of strategic innovation management at high-tech engineering enterprises

Science.gov (United States)

Ergunova, O. T.; Lizunkov, V. G.; Malushko, E. Yu; Marchuk, V. I.; Ignatenko, A. Yu

2017-02-01

The article considers the processes of forming the strategic system of innovative activity management at the enterprises of a high-tech mechanical engineering complex (MEC) that are traditionally decisive in shaping the economic base of Russia. The authors proposed a method of designing a strategic system of innovative activity management at the MEC’s enterprises of the region which is based on the consideration of means and opportunities of the enterprise to implement intellectual activity. The proposed methodology and the empirical results constituted a ground for developing a system of strategic innovation management when performing the state-guaranteed order at the hi-tech MEC enterprises. Its implementation will help to reduce the level of uncertainty throughout the entire life cycle of an innovative activity product.

Effects of job-related stress and burnout on asthenopia among high-tech workers.

Science.gov (United States)

Ostrovsky, Anat; Ribak, Joseph; Pereg, Avihu; Gaton, Dan

2012-01-01

Eye- and vision-related symptoms are the most frequent health problems among computer users. The findings of eye strain, tired eyes, eye irritation, burning sensation, redness, blurred vision and double vision, when appearing together, have recently been termed 'computer vision syndrome', or asthenopia. To examine the frequency and intensity of asthenopia among individuals employed in research and development departments of high-tech firms and the effects of job stress and burnout on ocular complaints, this study included 106 subjects, 42 high-tech workers (study group) and 64 bank employees (control group). All participants completed self-report questionnaires covering demographics, asthenopia, satisfaction with work environmental conditions, job-related stress and burnout. There was a significant between-group difference in the intensity of asthenopia, but not in its frequency. Burnout appeared to be a significant contributing factor to the intensity and frequency of asthenopia. This study shows that burnout is a significant factor in asthenopic complaints in high-tech workers. This manuscript analyses the effects of psychological environmental factors, such as job stress and burnout, on ocular complaints at the workplace of computer users. The findings may have an ergonomic impact on how to improve health, safety and comfort of the working environment among computer users, for better perception of the job environment, efficacy and production.

The content and role of formal contracts in high-tech alliances

NARCIS (Netherlands)

de Jong, Gjalt; Woolthuis, Rosalinde Ja Klein

2009-01-01

In this study we investigate the governance structure of innovation processes in high-tech alliances, focusing on the content and role of formal contracts. The design of a formal agreement is one of the most important strategic decisions for alliance partners. Drawing upon transaction cost arguments

Silicon Valley: Planet Startup : Disruptive Innovation, Passionate Entrepreneurship & High-tech Startups

NARCIS (Netherlands)

dr. A. Maas; Dr. P. Ester

2016-01-01

For decades now, Silicon Valley has been the home of the future. It's the birthplace of the world's most successful high-tech companies-including Apple, Yahoo, Google, Facebook, Twitter, and many more. So what's the secret? What is it about Silicon Valley that fosters entrepreneurship and

Design of demand driven return supply chain for high-tech products

Directory of Open Access Journals (Sweden)

Jalal Ashayeri

2011-10-01

Full Text Available Purpose: The purpose of this study is to design a responsive network for after-sale services of high-tech products. Design/methodology/approach: Analytic Hierarchy Process (AHP and weighted max-min approach are integrated to solve a fuzzy goal programming model. Findings: Uncertainty is an important characteristic of reverse logistics networks, and the level of uncertainty increases with the decrease of the products’ life-cycle. Research limitations/implications: Some of the objective functions of our model are simplified to deal with non-linearities. Practical implications: Designing after-sale services networks for high-tech products is an overwhelming task, especially when the external environment is characterized by high levels of uncertainty and dynamism. This study presents a comprehensive modeling approach to simplify this task. Originality/value: Consideration of multiple objectives is rare in reverse logistics network design literature. Although the number of multi-objective reverse logistics network design studies has been increasing in recent years, the last two objective of our model is unique to this research area.

Consensus together to jointly promote the safe and efficient development of China's Nuclear industry

International Nuclear Information System (INIS)

Lei Zengguang

2012-01-01

After the development of China's nuclear industry 56 years, and a certain ability to form a strategic advantage for sustainable development, laying a solid foundation for the development of the national nuclear energy. 2011 Japan's Fukushima Daiichi nuclear accident occurred seven. 2011 of the 'Economic and Social Development Twelfth Five Five Year plan' clearly stated: 'on the basis of ensuring efficient and safe development of nuclear power', the development of China's nuclear industry is facing unprecedented opportunities and challenges, requiring the nuclear industry and nuclear academia work together to jointly promote China's nuclear industry safe and efficient, development

Nuclear industry technology boomerang

International Nuclear Information System (INIS)

Scholler, R.W.

1987-01-01

The benefits to the medical, pharmaceutical, semiconductor, computer, video, bioscience, laser, defense, and numerous high-tech industries from nuclear technology development fallout are indeed numerous and increase every day. Now those industries have made further progress and improvements that, in return, benefit the nuclear industry. The clean-air and particle-free devices and enclosures needed for protection and decontamination are excellent examples

PREFACE: 13th High-Tech Plasma Processes Conference (HTPP-2014)

Science.gov (United States)

2014-11-01

The High-Tech Plasma Processes - 13th European Plasma Conference (HTPP-2014) was held in Toulouse (France) on 22-27 June 2014. The conference series started in 1990 as a thermal plasma conference and has gradually expanded to include other related topics. Now the High-Tech Plasma Processes - European Plasma Conference (HTPP) is an international conference organised in Europe every two years with topics encompassing the whole field of plasma processing science. The aim of the conference is to bring different scientific communities together, to facilitate contacts between science, technology and industry and to provide a platform for the exploration of both the fundamental topics and new applications of plasmas. For this edition of HTPP, as was the case for the last, we have acheived a well balanced participation from the communities of both thermal and non-thermal plasma researchers. 142 people from 17 countries attended the conference with the total number of contributions being 155, consisting of 8 plenary and 8 invited talks plus 51 oral and 88 poster contributions. We have received numerous papers corresponding to the contributions of HTPP-2014 that have been submitted for publication in this volume of Journal of Physics: Conference Series. Each submitted contribution has been peer reviewed (60 referees with at least two reviewing each paper) and the Editors are very grateful to the referees for their careful support in improving the original manuscripts. In total, 52 manuscripts have been accepted for publication covering a range of topics of plasma processing science from plasma fundamentals to process applications through to experiments, diagnostics and modelling. We have grouped the papers into the following 5 topics: - Arc-Materials Interaction and Metallurgy - Plasma Torches and Spraying - Synthesis of Powders and Nanomaterials - Deposition and Surface Treatment - Non-Equilibrium Plasmas We deeply thank the authors for their enthusiastic and high

Pricing and inventory policies for Hi-tech products under replacement warranty

Science.gov (United States)

Tsao, Yu-Chung; Teng, Wei-Guang; Chen, Ruey-Shii; Chou, Wang-Ying

2014-06-01

Companies, especially in the Hi-tech (high-technology) industry (such as computer, communication and consumer electronic products), often provide a replacement warranty period for purchased items. In reality, simultaneously determining the price and inventory decisions under warranty policy is an important issue. The objective of this paper is to develop a joint pricing and inventory model for Hi-tech products under replacement warranty policy. In the first model, we consider a Hi-tech product feature in which the selling price is declining in a trend. We determine the optimal inventory level for each period and retail price for the first period while maximising the total profit. In the second model, we further determine the optimal retail price and inventory level for each period in the dynamic demand market. This study develops solution approaches to solve the problems described above. Numerical analysis discusses the influence of system parameters on the company's decisions and behaviours. The results of this study could serve as a reference for business managers or administrators.

Iterest grows for Dutch mid-tech and low-tech greenhouse technology : A greenhouse to suit all tropical conditions (interview with Anne Elings)

NARCIS (Netherlands)

Kierkels, T.; Elings, A.

2014-01-01

The Netherlands sets the standard for high-tech greenhouses worldwide. But increasingly suppliers are looking too at possibilities within the mid-tech and even the low-tech market segments. The Dutch government is supporting demonstration projects, for example in Mexico, East Africa and Malaysia.

Spatial Planning and High-tech Development : A comparative study of Eindhoven city-region, the Netherlands and Hsinchu City-region, Taiwan

NARCIS (Netherlands)

Huang, W.J.

2013-01-01

High-tech development—which lies at the very heart of the processes of economic growth—has been recognised by many developed and developing countries as a strategic instrument to enhance and sustain their competitiveness in the global economic network. Although the concept of high-tech development

ANTHROPOLOGICAL ASPECTS OF HIGH-TECH FACILITIES OP-ERATION SUPPORT

Directory of Open Access Journals (Sweden)

Olexandr O. Matusevych

2017-06-01

Full Text Available Purpose. The article, based on the analysis of actual materials, highlights the importance of taking into account the influence of the human factor in occurrence of emergency situations in terms of transport infrastructure. Methodology. The research is based on the interdisciplinary system analysis. It was comprehended how the service technicians of high-tech systems can create latent unsafe conditions that combined with other hazardous activities can cause an emergency and injury. The authors attempt to dramatize the issue in order to find a solution – on the one hand, man is the most crucial part of a complex technological system, on the other hand – he is the most unreliable part of the system, especially in terms of the extreme power of modern vehicles and their speeds. The above situation demonstrates the need for a new level of anthropic comprehension of the high-tech systems in the schematic set "human-system-environment". Originality. The paper analysed the problems and conditions of human factors that allow detecting the causes of technicians’ errors. The authors highlighted proposals for psychocorrective work among the personnel of the facilities. The problem of further development of continuous improvement of the equipment maintenance systems, based on integrated approach taking into account the human factor, is also not overlooked. Conclusion. In the course of understanding the human factor and its influence on the processes, the most urgent tasks are as follows: implementation of new system software, automation of vehicles and development of high production culture based on moral qualities of experts.

Young people progressive mentality’s training in conditions of civilization changes within the impact of information and high-tech progress

Directory of Open Access Journals (Sweden)

N. V. Polishchuk

2017-01-01

It has been shown that the Ukrainian nation is looking for its own path of development (civilizational, spiritual, cultural, mental, economic, political, social in modern, post-industrial, postmodern information and high-tech world. It is necessary to attract both public institutions, and educational ones to the intensification of its development taking into account the mentality of our nation, which has its historical origins and values, its specific way of thinking, specific worldview in the system of spiritual life. That is the only way to form the young generation of Ukrainians — happy, educated, spiritually and financially rich with progressive thinking and mentality.

Energy consumption restricted productivity re-estimates and industrial sustainability analysis in post-reform China

International Nuclear Information System (INIS)

Chen, Shiyi; Santos-Paulino, Amelia U.

2013-01-01

This paper investigates the impact of energy on China's industrial sustainability by using a novel approach to estimate real total factor productivity. The growth accounting indicates that the substantial industrial reforms in China have led to productivity growth. Energy and capital are also important factors driving China's industrial growth. Productivity growth in China's industry is mostly attributable to the high-tech light industrial sectors. - Highlights: ► Productivity has become the most important growth engine in majority of sectors. ► Energy and capital are also important factors promoting China's industrial growth. ► The productivity improvement is more attributable to high-tech light industry. ► The heavy industry performs worse than the light one in terms of productivity

The Risk Evaluation of Agricultural High-tech Investment Project%农业高新技术投资项目风险评价

Institute of Scientific and Technical Information of China (English)

陆迁; 苗姗姗

2005-01-01

The agricultural high-tech investment project (AHIP) is characterized by technology-intensive, high risk and great profit. This article analyzes essential factors of the risks of the agricultural high-tech investment projects and the traditional risk evaluation method of agricultural projects. We think that the applications of the sensitivity analysis and probability are defective. Therefore, this article introduces a structural model to evaluate the risks of the agricultural high-tech investment projects and the system of the concrete evaluation indexes.

New Technologies and Sustainable Development of Industry

International Nuclear Information System (INIS)

Muggli, Christoph; Baumgartner, Walter; Werner, Frank

1996-08-01

The present technology assessment study examines the effects of three technology scenarios on future energy consumption and the energy-related emissions by industrial manufacturing in Switzerland. The three paths of development (Trend, High-Tech, Alternative) can be represented as follows: After a reduction until 2015, the Trend development entails a slight increase in consumption of energy. Until then consumption is some 10 percent lower in both the High-Tech and the Alternative Scenarios. Consumption of electricity increases in all scenarios, the proportion is highest in 20 year's time under the High-Tech scenario. SO 2 and CO 2 emissions decrease in all scenarios until 2000 and then level out at a low level. The emissions are lowest in the High-Tech scenario. In contrast the NO x and the VOC emissions diminish until 2000 and then rise again continuously. At this juncture important bases are still not yet available for a definitive evaluation with respect to the sustainable development. Sustainability objectives are currently being compiled for Switzerland in the wake of the Berlin Climate Conference and the Rio Conference. In the political lobbies the Green factions are making demands, such as those currently under discussion internationally (e.g. CO 2 reductions on a scale of some 80 percent by 2050), whereas conservative and industrial circle representatives support the objective of sustainable development but reject a quantification of objectives. The official objectives of the Swiss Energy 2000 programme can be achieved with all scenarios. With the High-Tech and Alternative scenarios, concepts of a reduction in CO 2 by 20 percent by 2015 (as currently under discussion in Switzerland), are realistic. However, further energy-relevant efficiency potentials in industrial production can be activated by energy-policy motivated measures. More extensive objectives, such as e.g. a CO 2 reduction of 50 percent, are hardly attainable, even in the long-term, without

External Knowledge Acquisition Needs a Hand? The Dual Effects of Industry-University Collaborations on High-Tech Firms’ Innovation Capability in China

DEFF Research Database (Denmark)

Li-Ying, Jason; Wang, Yuandi; Salomo, Søren

2012-01-01

, the available licensing data to public starts from 2000 to 2009. We limit our sample to those firms who engaged in foreign technology licensing-in activities during 2000 to 2003, which resulted in a sample of 91 Chinese licensee firms in high-tech sector. This period is chosen in order to obtain an appropriate....... According to the ‘Administration of Record Filing of Technology Licensing’, the SIPO is authorized to fill the records of technology licensing in China. A record contains more valuable information: names of licensor, licensee, and licensed patents, contracting number, date, and license type. So far...

Engineering Technology Showcase to feature high-tech products from 18 companies

OpenAIRE

Gilbert, Karen

2007-01-01

The Student Technology Council (STC) at Virginia Tech is sponsoring an Engineering Technology Showcase on Tuesday, March 27. In addition to providing a platform for technology companies to show off their most recent innovations, technology presentations will be offered by Virginia Tech faculty and staff on topics ranging from a virtual greenhouse to the System X supercomputer.

Come and see our new high-tech products!

CERN Multimedia

GS Department

2010-01-01

Since 1977, GMP has been active in the fields of laser, spectroscopy, electro-optics and micropositioning. Its mission is to link between suppliers of high tech products with the end users. On Wednesday 26 May between 10 and 12 a.m. - Room A, Main Building, (Bldg. 61/1-017) - you will be able to touch and try out our new laser products. Our specialized engineers will also be on hand to answer all your questions. A drink will be offered at the end of the presentation. There will also be the opportunity to plan meetings in the afternoon to further discuss and complicated questions.

FuSuMaTech workshop

CERN Multimedia

Olofsson, Simon

2018-01-01

The goal of the FuSuMaTecH IP workshop, organised at CERN Ideaquare 19-20 April, was to educate superconductivity and magnet experts about intellectual property. About 30 participants from multiple institutes and companies worked together in this two day interactive program which was facilitated by CERN Knowledge Transfer. Great progress was made in shaping the FuSuMaTech industrial demonstrator projects as well as the R&D&I subjects.

Phase associations and potential selective extraction methods for selected high-tech metals from ferromanganese nodules and crusts with siderophores

International Nuclear Information System (INIS)

Mohwinkel, Dennis; Kleint, Charlotte; Koschinsky, Andrea

2014-01-01

Highlights: • Phase associations of metals in marine Fe–Mn nodules and crusts were determined. • Selective leaching experiments with siderophore desferrioxamine B were conducted. • Siderophores selectively mobilize high-tech metals associated with Fe carrier phases. • Base metal liberation including Fe and Mn is limited. • Siderophores have promising potential for application in ore processing industries. - Abstract: Deep-sea ferromanganese deposits contain a wide range of economically important metals. Ferromanganese crusts and nodules represent an important future resource, since they not only contain base metals such as Mn, Ni, Co, Cu and Zn, but are also enriched in critical or rare high-technology elements such as Li, Mo, Nb, W, the rare earth elements and yttrium (REY). These metals could be extracted from nodules and crusts as a by-product to the base metal production. However, there are no proper separation techniques available that selectively extract certain metals out of the carrier phases. By sequential leaching, we demonstrated that, except for Li, which is present in an easily soluble form, all other high-tech metals enriched in ferromanganese nodules and crusts are largely associated with the Fe-oxyhydroxide phases and only to subordinate extents with Mn-oxide phases. Based on this fact, we conducted selective leaching experiments with the Fe-specific organic ligand desferrioxamine-B, a naturally occurring and ubiquitous siderophore. We showed by leaching of ferromanganese nodules and crusts with desferrioxamine-B that a significant and selective extraction of high-tech metals such as Li, Mo, Zr, Hf and Ta is possible, while other elements like Fe and the base metals Mn, Ni, Cu, Co and Zn are not extracted to large extents. The set of selectively extracted elements can be extended to Nb and W if Mn and carbonate phases are stripped from the bulk nodule or crust prior to the siderophore leach by e.g. a sequential leaching technique. This

Information in launch messages : stimulating the adoption of new high-tech consumer products

NARCIS (Netherlands)

Talke, K.S.S.; Snelders, Dirk

2013-01-01

This research investigates how the adoption of new high-tech consumer products can be stimulated by communicating product-related information in launch messages. In an initial pilot study, the authors find that for making an adoption decision, consumers require different types of product-related

Industrial site particulate pollution monitoring with an eye-safe and scanning industrial fiber lidar

Science.gov (United States)

Belanger, Brigitte; Fougeres, Andre; Talbot, Mario

2001-02-01

12 Over the past few years, INO has developed an Industrial Fiber Lidar (IFL). It enables the particulate pollution monitoring on industrial sites. More particularly, it has been used to take measurements of particulate concentration at Port Facilities of an aluminum plant during boat unloading. It is an eye-safe and portable lidar. It uses a fiber laser also developed at INO emitting 1.7 microJoules at 1534 nm with a pulse repetition frequency of 5 kHz. Given the harsh environment of an industrial site, all the sensitive equipment like the laser source, detector, computer and acquisition electronics are located in a building and connected to the optical module, placed outside, via optical fibers up to 500 m long. The fiber link also offers all the flexibility for placing the optical module at a proper location. The optical module is mounted on a two axis scanning platform, able to perform an azimuth scan of 0 to 355 deg and an elevation scan of +/- 90 deg, which enables the scanning of zones defined by the user. On this industrial site, materials like bauxite, alumina, spathfluor and calcined coke having mass extinction coefficients ranging from 0.53 to 2.7 m2/g can be detected. Data for different measurement configurations have been obtained. Concentration values have been calculated for measurements in a hopper, along a wharf and over the urban area close to the port facilities. The lidar measurements have been compared to high volume samplers. Based on these comparisons, it has been established that the IFL is able to monitor the relative fluctuations of dust concentrations. It can be integrated to the process control of the industrial site for alarm generation when concentrations are above threshold.

Tech House

Science.gov (United States)

1978-01-01

The members of the Swain family- Dr. Charles "Bill" Swain, wife Elaine, daughter Carol, 17, son "Chuck", 12, and dog Susie have an interesting assignment. They are active participants in an important NASA research program involving the application of space-age technology to home construction. b' Transplanted Floridians, the Swains now reside in NASA's Tech House, loatedat Langley Research Center, Hampton, Virginia. Their job is to use and help evaluate the variety of advanced technology systems in Tech House. A contemporary three-bedroom home, Tech House incorporates NASA technology, the latest commercial building techniques and other innovations, all designed to reduce energy and water consumption and to provide new levels of comfort, convenience, security and fire safety. Tech House equipment performed well in initial tests, but a house is not a home until it has people. That's where the Swains come in. NASA wants to see how the various systems work under actual living conditions, to confirm the effectiveness of the innovations or to determine necessary modifications for improvement. The Swains are occupying the house for a year, during which NASA engineers are computer monitoring the equipment and assembling a record of day-to-day performance. . Tech House is a laboratory rather than a mass production prototype, but its many benefits may influence home design and construction. In a period of sharply rising utility costs, widespread adoption of Tech House features could provide large-scale savings to homeowners and potentially enormous national benefit in resources conservation. Most innovations are aerospace spinoffs: Some of the equipment is now commercially available; other systems are expected to be in production within a few years. Around 1980, a Tech House-type of home could be built for $45-50,000 (1 976 dollars). It is estimated that the homeowner would save well over $20,000 (again 1976 dollars) in utility costs over the average mortgage span of 20 years.

CHANGING THE LANDSCAPE--LOW-TECH SOLUTIONS TO THE PADUCAH SCRAP METAL REMOVAL PROJECT ARE PROVIDING SAFE, COST-EFFECTIVE REMEDIATION OF CONTAMINATED SCRAP YARDS

International Nuclear Information System (INIS)

Watson, Dan; Eyman, Jeff

2003-01-01

Between 1974 and 1983, contaminated equipment was removed from the Paducah Gaseous Diffusion Plant (PGDP) process buildings as part of an enrichment process upgrade program. The upgrades consisted of the dismantlement, removal, and on-site storage of contaminated equipment, cell components, and scrap material (e.g., metal) from the cascade facilities. Scrap metal including other materials (e.g., drums, obsolete equipment) not related to this upgrade program have thus far accumulated in nine contiguous radiologically-contaminated and non-contaminated scrap yards covering 1.05E5 m2 (26 acres) located in the northwestern portion of the PGDP. This paper presents the sequencing of field operations and methods used to achieve the safe removal and disposition of over 47,000 tonnes (53,000 tons) of metal and miscellaneous items contained in these yards. The methods of accomplishment consist of mobilization, performing nuclear criticality safety evaluations, moving scrap metal to ground level, inspection and segregation, sampling and characterization, scrap metal sizing, packaging and disposal, and finally demobilization. Preventing the intermingling of characteristically hazardous and non-hazardous wastes promotes waste minimization, allowing for the metal and materials to be segregated into 13 separate waste streams. Low-tech solutions such as using heavy equipment to retrieve, size, and package scrap materials in conjunction with thorough planning that integrates safe work practices, commitment to teamwork, and incorporating lessons learned ensures that field operations will be conducted efficiently and safely

Determining Studies Conducted upon Individuals with Autism Spectrum Disorder Using High-Tech Devices

Science.gov (United States)

Eliçin, Özge; Kaya, Ali

2017-01-01

This study explores 67 experimental research articles written about children with Autism Spectrum Disorder using high-tech devices. The studies in this research were accessed through EBSCO, Academic Search Complete, ERIC, and Uludag University online search engines using keywords such as "autism and technology", "autism and…

Are You What You Eat? An inside Look at High-Tech Food

Science.gov (United States)

Miller, Roxanne Greitz

2007-01-01

If we abide by the familiar saying "you are what you eat," it is understandable that people may be concerned with the incredible advances in food science technology and their possible impacts on human health. For example, in recent years high-tech scientific processes such as genetic modification, irradiation, and cloning have all been used to…

Two Different Maintenance Strategies in the Hospital Environment: Preventive Maintenance for Older Technology Devices and Predictive Maintenance for Newer High-Tech Devices.

Science.gov (United States)

Sezdi, Mana

2016-01-01

A maintenance program generated through the consideration of characteristics and failures of medical equipment is an important component of technology management. However, older technology devices and newer high-tech devices cannot be efficiently managed using the same strategies because of their different characteristics. This study aimed to generate a maintenance program comprising two different strategies to increase the efficiency of device management: preventive maintenance for older technology devices and predictive maintenance for newer high-tech devices. For preventive maintenance development, 589 older technology devices were subjected to performance verification and safety testing (PVST). For predictive maintenance development, the manufacturers' recommendations were used for 134 high-tech devices. These strategies were evaluated in terms of device reliability. This study recommends the use of two different maintenance strategies for old and new devices at hospitals in developing countries. Thus, older technology devices that applied only corrective maintenance will be included in maintenance like high-tech devices.

Online Classes See Cheating Go High-Tech

Science.gov (United States)

Young, Jeffrey R.

2012-01-01

Easy A's may be even easier to score these days, with the growing popularity of online courses. Tech-savvy students are finding ways to cheat that let them ace online courses with minimal effort, in ways that are difficult to detect. The issue of online cheating may rise in prominence, as more and more institutions embrace online courses, and as…

Nuclear industry: a young sector of excellence

International Nuclear Information System (INIS)

Varin, P.

2017-01-01

Nuclear industry is the 3. industrial sector in France and is the good reason why the French energy mix is largely carbon-free. The medium term challenges that faces nuclear industry in this country is first to succeed the extensive refit of nuclear power plants with a view on getting the extension of their operating life and secondly to recruit the skilled staff nuclear industry needs. About 8000 jobs dispatched in the 2500 enterprises that forms the nuclear sector will be available each year up to 2020. The age pyramid shows that numerous retirements are expected in the years to come so the issue of skill and knowledge transfer is looming. 25% of recruitment will be made on the basis of work-study contracts particularly for technical jobs. Concerning recruitment, the nuclear sector is competing with other high-tech sectors like aeronautics or the automobile sector, which make things harder. The image that nuclear industry wants to promote of itself is the image of a young, modern, high-tech industry that appeared less than 50 years ago and whose main purpose is to provide a carbon-free electricity to an avid world. (A.C.)

TechTracS: NASA's commercial technology management system

Science.gov (United States)

Barquinero, Kevin; Cannon, Douglas

1996-03-01

The Commercial Technology Mission is a primary NASA mission, comparable in importance to those in aeronautics and space. This paper will discuss TechTracS, NASA Commercial Technology Management System that has been put into place in FY 1995 to implement this mission. This system is designed to identify and capture the NASA technologies which have commercial potential into an off-the-shelf database application, and then track the technologies' progress in realizing the commercial potential through collaborations with industry. The management system consists of four stages. The first is to develop an inventory database of the agency's entire technology portfolio and assess it for relevance to the commercial marketplace. Those technologies that are identified as having commercial potential will then be actively marketed to appropriate industries—this is the second stage. The third stage is when a NASA-industry partnership is entered into for the purposes of commercializing the technology. The final stage is to track the technology's success or failure in the marketplace. The collection of this information in TechTracS enables metrics evaluation and can accelerate the establishment on direct contacts between and NASA technologist and an industry technologist. This connection is the beginning of the technology commercialization process.

Why did we make that cheese? An empirically based framework for understanding what drives innovation activities in a low-tech industry

DEFF Research Database (Denmark)

Harmsen, Hanne; Grunert, Klaus G.

The interplay between R&D skills and competencies and market skills and competencies is in the more recent product development literature seen as a major determinant of success for innovation. The study reported in this paper was done in order to more light on these two contructs in a traditionally...... low-tech industry, where product development is nevertheless considered to be strategically important, ie, the food processing industry. The results of a series of case studies indicate that oth constructs than R&D and market orientation may be more appropriate for understanding innovation...... and explaining innovation success in the case material. A new set of constructs focusing on what causes specific innovation activities to occur is prop and a revised framework is developed....

Continuous Innovation and Business Development in High-tech SME Clusters: A Change Point Analysis and Assessment Approach

DEFF Research Database (Denmark)

Müller, Sabine; Neergaard, Helle; Ulhøi, John Parm

The aim of this paper is to  propose an integrated methodological approach to study  complex  and  longitudinal  processes  such  as  continuous  innovation  and business development in high-tech SME clusters. It draws from four existing and  well-recognised approaches for studying events...... is especially helpful for studies which focus on continuous innovation and  business development in high-tech SME clusters as these  studies  could  benefit  tremendously  from  more qualitative  approaches, which  facilitate  in-depth  understanding  continuous  and  changing  processes. Therefore, major...

Accelerating nano-technological innovation in the Danish construction industry

DEFF Research Database (Denmark)

Koch, Christian; Stissing Jensen, Jens

2007-01-01

. The institutional features of the system are furthermore poorly equipped at identifying potentials within high-tech areas. In order to exploit the potentials of nano-technology it is thus argued that an alternative TIS needs to be established. Initiatives should identify and support "incubation rooms" or marked......  By viewing the construction industry as a technological innovation system (TIS) this paper discusses possible initiatives to accelerate nanotechnological innovations. The point of departure is a recent report on the application of nano-technology in the Danish construction industry, which...... concludes that opportunities are generally poorly appreciated by the industry and research communities alike. It is found that the construction industry is characterised by low-tech trajectories where dedicated innovation networks are often too fragile for innovations to stabilize and diffuse...

New technology for carbon dioxide at high pressure

International Nuclear Information System (INIS)

Hassina, Bazaze; Raouf, Zehioua; Menial, A. H.

2006-01-01

Carbon dioxide has long been the nemesis of environmentalists because of its role in global warming, but under just the right conditions-namely, high pressure and high temperature its one of nature's best and most environmentally benign solvents. Decaf-coffee lovers, for instance, benefit from its ability to remove caffeine from coffee beans.During the last few years, carbon dioxide has also made inroads in the dry-cleaning industry, providing a safe cleaning alternative to the chemical perchloroethylene. But it's on the high-tech front that carbon dioxide may make its biggest impact. T here are huge opportunities. Scientists have known for more than a century that at 75 times atmospheric pressure and 31 degree centigrade, carbon dioxide goes into and odd state that chemists called s upercritical . What's interesting to industry is that supercritical carbon dioxide may be an enabling technology for going to smaller dimensions.(Author)

Assisting the rehabilitation by hi-tech

Directory of Open Access Journals (Sweden)

Mateusz Tomanek

2017-03-01

Full Text Available High-tech, which the use is becoming increasingly popular in medicine, media and education has several advantages as increasing the number of persons to whom these services can hit. Example of such activities is the use of videoconference during rehabilitation, where patients perform basic exercises at home, and physiotherapist could control the movement by on-line video. The use of modern technology is only assisting the rehabilitation, rather than a complete replacement. As the purpose of the article was adopted to show the range of possibilities for the use of high-tech in rehabilitation.

Cooperation of Nuclear Industrial, Academic and Research Organizations

International Nuclear Information System (INIS)

Kang, Chang Sun

1987-01-01

In 1980's, however, the industry atmosphere has been slowly changing since advanced countries become more protective in high tech releases to economically competing countries like Korea. Meanwhile, Korea itself is in the stage that per-capita income exceeds 2,000 dollars, and starts realizing that the 'technology self-reliance' is the only solution for overcoming the present situation so as to become one of those developed countries. Towards this goal of technology self-reliance, our industries and government bodies are working together to develop an extensive implementation program. Korea is very poor in natural resources and capital. Fortunately, however, Korea has abundant well-educated and disciplined human resources. Therefore, the appropriate utilization of human resources is the only and natural solution for Korea's emerging into an advanced country after the turn of this century. KEPCO is the only utility company in Korea which produces and distributes the electricity. The first priority of the utility company is to provide the consumers with a good quality electricity as economically as possible in timely manner, which requires the safe and reliable operation of power plants

A Concept of Constructing a Common Information Space for High Tech Programs Using Information Analytical Systems

Science.gov (United States)

Zakharova, Alexandra A.; Kolegova, Olga A.; Nekrasova, Maria E.

2016-04-01

The paper deals with the issues in program management used for engineering innovative products. The existing project management tools were analyzed. The aim is to develop a decision support system that takes into account the features of program management used for high-tech products: research intensity, a high level of technical risks, unpredictable results due to the impact of various external factors, availability of several implementing agencies. The need for involving experts and using intelligent techniques for information processing is demonstrated. A conceptual model of common information space to support communication between members of the collaboration on high-tech programs has been developed. The structure and objectives of the information analysis system “Geokhod” were formulated with the purpose to implement the conceptual model of common information space in the program “Development and production of new class mining equipment - “Geokhod”.

Integrative Laser Medicine and High-Tech Acupuncture at the Medical University of Graz, Austria, Europe

Directory of Open Access Journals (Sweden)

Gerhard Litscher

2012-01-01

Full Text Available At the moment, modernization of acupuncture has a high priority. On the traditional side, acupuncture has only recently been awarded the status of Intangible Cultural Heritage by the UNESCO. On the innovative side, high-tech acupuncture is a registered trademark in Austria. Acupuncture has been used for medical treatment for thousands of years. A large number of empirical data are available but the technical quantification of effects was not possible up to now. Using electroacupuncture, needle, or laser stimulation and modern biomedical techniques, it was possible for the first time to quantify changes in biological activities caused by acupuncture. This paper which serves as introduction for the special issue “High-Tech Acupuncture and Integrative Laser Medicine” of the present journal, focuses on the latest innovative aspects that underline the further enhancement and development of acupuncture. Special emphasis is given to new methodological and technical investigations, for example, results obtained from all kinds of acupuncture innovations (e.g., teleacupuncture and integrative laser medicine.

Integrative Laser Medicine and High-Tech Acupuncture at the Medical University of Graz, Austria, Europe

Science.gov (United States)

Litscher, Gerhard

2012-01-01

At the moment, modernization of acupuncture has a high priority. On the traditional side, acupuncture has only recently been awarded the status of Intangible Cultural Heritage by the UNESCO. On the innovative side, high-tech acupuncture is a registered trademark in Austria. Acupuncture has been used for medical treatment for thousands of years. A large number of empirical data are available but the technical quantification of effects was not possible up to now. Using electroacupuncture, needle, or laser stimulation and modern biomedical techniques, it was possible for the first time to quantify changes in biological activities caused by acupuncture. This paper which serves as introduction for the special issue “High-Tech Acupuncture and Integrative Laser Medicine” of the present journal, focuses on the latest innovative aspects that underline the further enhancement and development of acupuncture. Special emphasis is given to new methodological and technical investigations, for example, results obtained from all kinds of acupuncture innovations (e.g., teleacupuncture) and integrative laser medicine. PMID:22570669

Beyond and between academia and business: How Austrian biotechnology researchers describe high-tech startup companies as spaces of knowledge production.

Science.gov (United States)

Fochler, Maximilian

2016-04-01

Research and innovation policy has invested considerable effort in creating new institutional spaces at the interface of academia and business. High-tech startups founded by academic entrepreneurs have been central to these policy imaginaries. These companies offer researchers new possibilities beyond and between academia and larger industry. However, the field of science and technology studies has thus far shown only limited interest in understanding these companies as spaces of knowledge production. This article analyses how researchers working in small and medium-sized biotechnology companies in Vienna, Austria, describe the cultural characteristics of knowledge production in this particular institutional space. It traces how they relate these characteristics to other institutional spaces they have experienced in their research biographies, such as in academia or larger corporations. It shows that the reasons why researchers decide to work in biotechnology companies and how they organize their work are deeply influenced by their perception of deficiencies in the conditions for epistemic work in contemporary academia and, to a lesser degree, in industry.

A World of Competitors: Assessing the US High-Tech Advantage and the Process of Globalisation

Science.gov (United States)

Douglass, John Aubrey

2008-01-01

Research universities throughout the world are part of a larger effort by countries to bolster science and technological innovation and compete economically. The United States remains highly competitive as a source of high-tech innovation because of a number of market positions, many the results of long-term investments in institutions (such as…

Impacts of Academic R&D on High-Tech Manufacturing Products: Tentative Evidence from Supercomputer Data

Science.gov (United States)

Le, Thanh; Tang, Kam Ki

2015-01-01

This paper empirically examines the impact of academic research on high-tech manufacturing growth of 28 Organisation for Economic Co-operation and Development (OECD) and emerging countries over the 1991-2005 period. A standard research and development (R&D) expenditure based measure is found to be too general to capture the input in high-tech…

Code of practice for the safe use of industrial radiography equipment (1989)

International Nuclear Information System (INIS)

1989-12-01

This code supersedes the Code of practice for the control and safe handling of sealed radioactive sources used in industrial radiography, published by the National Health and Medical Research Council (NHMRC) in 1968. It differs significantly from the former code because radiation protection practice and recommended standards have changed. The code covers the design, construction and requirements for the safe use of X-radiography equipment and gamma-radiography equipment. It provides illustrative working rules, detailed emergency procedures and comprehensive responsibilities and duties for all personnel involved in supplying and using industrial radiography equipment. The code details those equipment requirements, personnel requirements and work practices that the NHMRC considers necessary to keep exposures to ionizing radiation as low as reasonably achievable. Some equipment and facilities currently in use may not meet all of the mandatory requirements of this code. These requirements have been included in the code to encourage progress towards future compliance in the expectation that, in the interim, statutory authorities will apply them with discretion

Neo-Industrial and Sustainable Development of Russia as Mineral Resources Exploiting Country

Science.gov (United States)

Prokudina, Marina; Zhironkina, Olga; Kalinina, Oksana; Gasanov, Magerram; Agafonov, Felix

2017-11-01

In the Russian economy, the world leadership in the extraction of different mineral resources is combined with the potential for their processing and a significant scientific sector. Innovative development of raw materials extraction is impossible without the parallel technological modernization of the high-tech sector. In general, the complex of these processes is a neo-industrialization of the economy. Neo-industrially oriented transformation of the economy reflects complex changes in its structure, the transformation of established stable relationships between various elements of the system of social production that determine macroeconomic proportions. Neo-industrial transformations come along with the modification of economic relations associated with investments, innovations, labor and income distribution, with the process of locating productive forces and regulating the economy by the government. Neo-industrialization of economy is not only significant changes in its technological and reproductive structure (the development of high-tech industries, the integration of science and industry), but, above all, the implementation of a system structural policy of innovative development of raw material industry and the recovery of manufacturing industries on a new technological basis.

The institutional arrangements of innovation: Antecedents and performance effects of trust in high-tech alliances

NARCIS (Netherlands)

Jong, G.; Klein Woolthuis, R.J.A.

2008-01-01

In this study we investigate the institutional arrangements of innovation processes in high-tech alliances, focusing on the role of trust. A major strength of the research is the opportunity to address antecedents as well as performance effects of trust. The antecedents of interorganizational trust

Vraaggestuurd Programma 2012-2014. Voortgangsrapportage 2013, VP Security, Thema VII High Tech Systemen en Materialen

NARCIS (Netherlands)

Don, J.A.

2014-01-01

De roadmap Security voor topsector High Tech Systems & Materials wordt gedragen door een breed consortium van bedrijven, overheden, TNO, NLR en STW/NWO (zie www.htsm.nl). Onder regie van het roadmapteam Security is het plan 2013 voor TNO-Vraaggestuurd Onderzoeksprogramma Security 2012-2014 opgesteld

Prerequisites and opportunities for repositioning of the Urals metallurgy within the Industry 4.0

Directory of Open Access Journals (Sweden)

O. A. Romanova

2017-12-01

Full Text Available The authors present the modern trends in the development of metallurgy, and classify the technological structure of metallurgical industry. The article contains specific features of the development of metallurgy in the conditions of industry formation. A special role in this process plays the pace of digitalization and robotization of the industry, the development of additive technologies, Internet of things. The authors substantiate the possibility of developing the metallurgy of the Middle Urals as a science-intensive, high-tech complex that meets the requirements of Industry 4.0. This possibility interrelates with its repositioning, one of the main tasks of which is the formation of new sales markets focused on high-tech consumer industries, as well as the preservation of traditional consumption sectors under conditions of increasing competition in the construction materials market. The authors underline the importance of international cooperation in the field of environmentally safe industrial development, with applying the best available technologies and innovative development in general. The authors propose a methodological approach for assessing the repositioning of the regional metallurgical complex. This approach is the consecutive implementation of the following stages: assessment of dynamics and the forecast of development of consumer steel products sector and its structure based on identified priority areas of technological development of metallurgy in the region; construction of a factor model describing the changes in parameters of the RMC repositioning process, and approximation of the characteristics of their nonlinear elements; building a mathematical model on the basis of neural network algorithms for assessing the process of repositioning the RMC, taking into account projected values of the RMK parameters in the process of repositioning and changing the structure of consumer markets for metal products; formation of a variable

Competitive low-tech manufacturing and challenges for regional policy in the European context

DEFF Research Database (Denmark)

Hansen, Teis; Winther, Lars

2014-01-01

Today, low-tech firms in high-wage countries are focusing on increasing investments in highly skilled labour and advanced machinery, incremental innovation and high value-added niches. Danish policy, however, gives little attention to the new specificities of low-tech manufacturing......, and the understanding of innovation in national and regional strategies is dominated by a science-based perspective. There is a strong policy focus on human capital and research and development in manufacturing. Human capital is vital to manufacturing in general, but the latter is of less importance for low-tech firms....... Conversely, user–producer interactions and machinery investments, which are critical to low-tech competitiveness, are disregarded by policies....

Final Report: High Energy Physics at the Energy Frontier at Louisiana Tech

Energy Technology Data Exchange (ETDEWEB)

Sawyer, Lee [Louisiana Tech Univ., Ruston, LA (United States); Wobisch, Markus [Louisiana Tech Univ., Ruston, LA (United States); Greenwood, Zeno D. [Louisiana Tech Univ., Ruston, LA (United States)

2017-11-30

The Louisiana Tech University High Energy Physics group has developed a research program aimed at experimentally testing the Standard Model of particle physics and searching for new phenomena through a focused set of analyses in collaboration with the ATLAS experiment at the Large Hadron Collider (LHC) at the CERN laboratory in Geneva. This research program includes involvement in the current operation and maintenance of the ATLAS experiment and full involvement in Phase 1 and Phase 2 upgrades in preparation for future high luminosity (HL-LHC) operation of the LHC. Our focus is solely on the ATLAS experiment at the LHC, with some related detector development and software efforts. We have established important service roles on ATLAS in five major areas: Triggers, especially jet triggers; Data Quality monitoring; grid computing; GPU applications for upgrades; and radiation testing for upgrades. Our physics research is focused on multijet measurements and top quark physics in final states containing tau leptons, which we propose to extend into related searches for new phenomena. Focusing on closely related topics in the jet and top analyses and coordinating these analyses in our group has led to high efficiency and increased visibility inside the ATLAS collaboration and beyond. Based on our work in the DØ experiment in Run II of the Fermilab Tevatron Collider, Louisiana Tech has developed a reputation as one of the leading institutions pursuing jet physics studies. Currently we are applying this expertise to the ATLAS experiment, with several multijet analyses in progress.

The impact of FinTech start-ups on incumbent retail banks' share prices

OpenAIRE

Li, Yinqiao; Spigt, Renée; Swinkels, Laurens

2017-01-01

Background: This study aims to clarify the role of FinTech digital banking start-ups in the financial industry. We examine the impact of the funding of such start-ups on the stock returns of 47 incumbent US retail banks for 2010 to 2016. Methods: To capture the importance of FinTech start-ups, we use data on both the dollar-volume of funding and number of deals. We relate these to the stock returns with panel data regression methods. Results: Our results indicate a positive relationship exist...

Code of practice for the safe use of industrial radiography equipment (1989)

International Nuclear Information System (INIS)

1989-12-01

This code supersedes the Code of Practice for the control and safe handling of sealed radioactive sources use din industrial radiography, published by the National Health and Medical Research Council (NHMRC) in 1968. It differs significantly from the former code because radiation protection practice and recommended standards have changed. The code covers the design, construction and requirements for the safe use of X-radiography equipment and gamma-radiography equipment. It provides illustrative working rules, detailed emergency procedures and comprehensive responsibilities and duties for all personnel involved in supplying and using industrial radiography equipment. The code details those equipment requirements, personnel requirements and work practices that the NHMRC considers necessary to keep exposures to ionizing radiation as low as reasonably achievable. Some equipment and facilities currently in use may not meet all of the mandatory requirements of this code. These requirements have been included in the code to encourage progress towards future compliance in the expectation that, in the interim, statutory authorities will apply them with discretion. 9 refs., tabs., ills

Current developments of high-tech robotic and mechatronic systems in horticulture and challenges for the future

NARCIS (Netherlands)

Pekkeriet, E.J.; Henten, van E.J.

2011-01-01

This paper reviews the current developments of high-tech robotic and mechatronic systems in horticulture and future perspectives. Driving forces for mechanization are identified. Dutch greenhouse crop production is used as an example. In greenhouse horticulture the production steps and control that

Agglomeration economies in manufacturing industries: the case of Spain

OpenAIRE

Olga Alonso-Villar; José-María Chamorro-Rivas; Xulia González-Cerdeira

2001-01-01

This paper analyses the extent of geographical concentration of Spanish industry between 1993 and 1999, and study the agglomeration economies that could underlie that concentration. The results confirm that there is major geographic concentration in a number of industries with widely varying characteristics, including high-tech businesses and those linked to the provision of natural resources as well as traditional industries. The analysis of the scope of spillovers behind this agglomeration ...

ECONOMIC-MATHEMATICAL MODELING FLEXIBILITY AND PRODUCTIVITY RATIOS IN THE FORMATION OF A SYSTEM OF INTERNAL LOGISTICS OF HIGH-TECH ENTERPRISES

Directory of Open Access Journals (Sweden)

V. Baranov

2016-01-01

Full Text Available The article describes the features of construction of the system internal logistics of high-tech enterprises. It describes a range of problems solved by these systems. As part of the internal logistics system is considered one of the tasks of operational and production management calendar. Considered in the article the problem associated with the formation of the production program of diversified production. As part of this task is received economic and mathematical model that establishes the relation between the parameters of fl exibility and performance to organizational and production structure of the high-tech enterprises.

Hi tech microeconomics and information nonintensive calculi

Directory of Open Access Journals (Sweden)

Mirko Dohnal

2013-11-01

Full Text Available The article establishes link between the contributions made to the study of hi tech phenomena. It analyzes the evolution undergone by studies on the topic of the knowledge economics (HI-TECH process carried out by different disciplines (hard and soft sciences – sociology, ecology etc. from the point of view of the objectives they pursue. The attentions are concentrated on analysis of applicable mathematical tools used to develop realistic formal models. Information intensity is defined as the amount of information which is needed for the realistic application of a corresponding formal tool. High information intensity is desirable because it influences the model accuracy. Low information intensity is preferred when high information intensity requires more information items than are available and this is usually the case in knowledge engineering. Fuzzy models seem to be a useful extension of formal tool used in hi tech microeconomics. However, even fuzzy sets could be prohibitively information intensive. Therefore the range of available formal tools must be considerably broader. This paper introduces qualitative and semiqualitative models and rough sets. Each formal tool is briefly characterized.

Interorganizational imitation and acquisitions of high-tech ventures

OpenAIRE

Ozmel, Umit; Reuer, J. J.; Wu, Cheng-Wei

2017-01-01

Research summary: This article shows that there is a positive association between the changes in the number of prior acquisitions or the changes in the prominence of prior acquirers within the focal venture's subfield and the venture's likelihood to be acquired. Results are in line with the existence of frequency- and trait-based imitation in acquisitions targeting tech ventures. More importantly, these positive associations are more pronounced when (a) exogenous technological uncertainty wit...

Orientace na konkurenci u hi-tech podniků

Directory of Open Access Journals (Sweden)

Lucie Kaňovská

2013-10-01

Full Text Available Purpose: The purpose of this paper is to examine the connection between market orientation and mainly competitor orientation and business performance at the hi-tech companies in the Czech Republic. Design/methodology/approach: The paper involves the New Method for measuring of market orientation. Data are collected through the survey and were used for the data analysis. Findings: The paper involves new aspects for perceiving competitor orientation, as a part of market orientation, and business performance. The result concurs with the results of researches of market orientation realized at this branch. Results show that competitor orientation has significant influence on business performance. Research limitations implications: The limitations are based on the methodology used for gaining data. However, the overall response rate is almost 20 %. The hi-tech industry is fast changing. From this reason, there can be many changes and it is impossible to repeat the research at the same companies. Practical implications: Our findings can help to understand market orientation and its relationship to competitors and business performance. Managers can use method for measuring of market orientation and can find out the level of market orientation at their companies. They can compare their results with the published average results of hi-tech companies. Originality/value: The originality of the paper comes from combining market orientation, the view of competition and business performance at hi-tech companies. The measurement of market orientation was made through the New Method. The model of the New method was constructed along after analysis of other 25 methods; we tried to eliminate the failings criticized in other methods.

OUTLAY FOR COMMERCIALIZATION OF HIGH-TECH PRODUCTS IN THE CONTEXT OF MARKETING MODELS OF INNOVATION DIFFUSION

OpenAIRE

O. Zhylinska; S. Firsova

2015-01-01

The necessity of identifying the costs for commercialization of high-tech products is revealed based on theoretical assumptions of marketing models of innovation diffusion. The results obtained show the objective nature of the avalanche increase of transaction costs choice, caused by a high level of information asymmetry, which occurs in gaps in lifecycle of high technology products adoption. A development and systematization of marketing measures to bridge the gap in life cycle of high techn...

High-performance laboratories and cleanrooms; TOPICAL

International Nuclear Information System (INIS)

Tschudi, William; Sartor, Dale; Mills, Evan; Xu, Tengfang

2002-01-01

The California Energy Commission sponsored this roadmap to guide energy efficiency research and deployment for high performance cleanrooms and laboratories. Industries and institutions utilizing these building types (termed high-tech buildings) have played an important part in the vitality of the California economy. This roadmap's key objective to present a multi-year agenda to prioritize and coordinate research efforts. It also addresses delivery mechanisms to get the research products into the market. Because of the importance to the California economy, it is appropriate and important for California to take the lead in assessing the energy efficiency research needs, opportunities, and priorities for this market. In addition to the importance to California's economy, energy demand for this market segment is large and growing (estimated at 9400 GWH for 1996, Mills et al. 1996). With their 24hr. continuous operation, high tech facilities are a major contributor to the peak electrical demand. Laboratories and cleanrooms constitute the high tech building market, and although each building type has its unique features, they are similar in that they are extremely energy intensive, involve special environmental considerations, have very high ventilation requirements, and are subject to regulations-primarily safety driven-that tend to have adverse energy implications. High-tech buildings have largely been overlooked in past energy efficiency research. Many industries and institutions utilize laboratories and cleanrooms. As illustrated, there are many industries operating cleanrooms in California. These include semiconductor manufacturing, semiconductor suppliers, pharmaceutical, biotechnology, disk drive manufacturing, flat panel displays, automotive, aerospace, food, hospitals, medical devices, universities, and federal research facilities

Technology life cycle and specialization patterns of latecomer countries: The case of the semiconductor industry

NARCIS (Netherlands)

Triulzi, G.

2014-01-01

Catching-up, leapfrogging and falling behind in terms of output and productivity in high-tech industries crucially depends on firms' ability to keep pace with technological change. In fast changing industries today's specialization does not guarantee tomorrow's success as changes in the

Running-gear Tech 2001; Fahrwerk-Tech 2001. Tagung

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

Dynamic driving characteristics, active safety and high comfort are conflicting goals which can be combined by active vehicle management systems. The conference discussed modern tools and methods in the fields of design, simulation and experiment. [German] Im Zielkonflikt zwischen Fahrdynamik, aktiver Sicherheit und Komfort bieten Fahrzeugregelsysteme enorme Moeglichkeiten. Systeme fuer Bremsen, Stabilisierung, Daempfung, Aufbaukontrolle und Fahrerassistenz werden in der Zukunft zu einem Fahrwerksmanagement verschmelzen. Diese Fahrzeugintelligenz erfordert moderne Tools und Methoden im Bereich Konzeption, Simulation und Versuch. Die Tagung Fahrwerk-Tech 2001 wird das Fahrwerk in dieser Gesamtheit betrachten und Experten aus den verschiedenen Bereichen zusammen bringen. (orig.)

Bachelor - power plant technology. Breaking new ground in academic training at the PowerTech Training Center; Bachelor - Kraftwerkstechnik. Neue Wege in der akademischen Ausbildung an der Kraftwerksschule

Energy Technology Data Exchange (ETDEWEB)

Umierski, C. [Kraftwerksschule e.V., Essen (Germany)

2007-07-01

For the power industry, recruiting suitable young engineers is a daunting task in the face of university reforms and the decline of highly-qualified academics in engineering sciences. This means that the power industry needs to increase their involvement with universities beyond its current extent. Participation in defining the course contents and raising the educational standards are aspects that are important to future employees; the same can be said of interesting perspectives. For the power industry, imparting the required competence and key qualifications is not the only issue - securing the future employees' long-term loyalty also plays a role. Together with the University of Applied Sciences Aachen and in close co-operation with technical committees of VGB PowerTech, the PowerTech Training Center has developed a bachelor course aimed at fulfilling the power industry's future need for engineers; students can enroll for the course from the winter semester 2007/2008 onwards. The specialisation area 'power plant technology' is offered to students of mechanical engineering as well as to employees from trainee programs in the industry. (orig.)

Stocks as Money: Convenience Yield and the Tech-Stock Bubble

OpenAIRE

John H. Cochrane

2002-01-01

What caused the rise and fall of tech stocks? I argue that a mechanism much like the transactions demand for money drove many stock prices above the 'fundamental value' they would have had in a frictionless market. I start with the Palm/3Com microcosm and then look at tech stocks in general. High prices are associated with high volume, high volatility, low supply of shares, wide dispersion of opinion, and restrictions on long-term short selling. I review competing theories, and only the conve...

The connected firm: The spatial dimension of interorganizational dependence along the industry life cycle

NARCIS (Netherlands)

de Vaan, M.

2012-01-01

The high-tech industry in Silicon Valley, automobile production in Detroit, and financial services in New York and London are just a few examples of industries that are spatially concentrated. This phenomenon has attracted interest from a wide range of social scientists and regional and national

Maury Nussbaum reappointed as Hal G. Prillaman Professor Fellow in Industrial and Systems Engineering

OpenAIRE

Owczarski, Mark

2010-01-01

Maury Nussbaum, professor of industrial and systems engineering in the College of Engineering at Virginia Tech, has been reappointed as the Hal G. Prillaman Professor Fellow in Industrial and Systems Engineering by the Virginia Tech Board of Visitors.

Brian M. Kleiner receives Ralph H. Bogle Professor Fellowship in Industrial and Systems Engineering

OpenAIRE

Owczarski, Mark

2010-01-01

Brian M. Kleiner, professor of industrial and systems engineering in the College of Engineering at Virginia Tech, has been named the Ralph H. Bogle Professor Fellow in Industrial and Systems Engineering by the Virginia Tech Board of Visitors.

High-Protein Diets: Are They Safe?

Science.gov (United States)

Healthy Lifestyle Nutrition and healthy eating Are high-protein diets safe for weight loss? Answers from Katherine ... L.D. For most healthy people, a high-protein diet generally isn't harmful, particularly when followed ...

CAD/CAM Helps Build Better Bots: High-Tech Design and Manufacture Draws Engineering-Oriented Students

Science.gov (United States)

Van Name, Barry

2012-01-01

There is a battlefield where no quarter is given, no mercy shown, but not a single drop of blood is spilled. It is an arena that witnesses the bringing together of high-tech design and manufacture with the outpouring of brute force, under the remotely accessed command of some of today's brightest students. This is the world of battling robots, or…

Commercial introduction of the Advanced NOxTECH system

Energy Technology Data Exchange (ETDEWEB)

Sudduth, B.C. [NOxTECH, Inc., Irvine, CA (United States)

1997-12-31

NOxTECH is BACT for diesel electric generators. Emissions of NO{sub x} are reduced 95% or more with substantial concurrent reductions in CO, particulates, and ROG`s. No engine modifications or other exhaust aftertreatments can remove all criteria pollutants as effectively as NOxTECH. The NOxTECH system reliably maintains NH{sub 3} slip below 2 ppm. Unlike other emissions controls, NOxTECH does not generate hazardous by-products. The Advanced NOxTECH system reduces the size, weight, and cost for BACT emissions reductions. Based on the operation of a 150 kW prototype, NOxTECH, Inc. is quoting commercial units for diesel electric generators. Advanced NOxTECH equipment costs about half as much as SCR systems, and NO{sub x} reduction can exceed 95% with guarantees for emissions compliance.

Seamount mineral deposits: A source of rare metals for high technology industries

Science.gov (United States)

Hein, James R.; Conrad, Tracey A.; Staudigel, Hubert

2010-01-01

The near exponential growth in Earth’s population and the global economy puts increasing constraints on our planet’s finite supply of natural metal resources, and, consequently, there is an increasing need for new sources to supply high-tech industries. To date, effectively all of our raw-metal resources are produced at land-based sites. Except for nearshore placer deposits, the marine environment has been largely excluded from metal mining due to technological difficulties, even though it covers more than 70% of the planet. The case can be made that deep-water seabed mining is inevitable in the future, owing to the critical and strategic metal needs for human society. In this paper, we evaluate the case that seamounts offer significant potential for mining.

Travail, transparency and trust : a case study of computer-supported collaborative supply chain planning in high-tech electronics

NARCIS (Netherlands)

Akkermans, H.A.; Bogerd, P.; van Doremalen, J.B.M.

2004-01-01

Describes a case study of supply chain collaboration facilitated by a decision support environment in a high-tech electronics supply chain with multiple independent companies. In a business process called collaborative planning, representatives from these companies jointly take decisions regarding

A Professional Mode of the Transformation of Sci-tech Achievements in Scientific Research Institutions of Tianjin City

Directory of Open Access Journals (Sweden)

Qiang Fu

2014-02-01

Full Text Available There are too many scientific research institutions in Tianjin, and the scientific research activities are very active. The transformation of Sci-tech achievements is badly in need of a set of suitable and standardized mode, and how to establish this kind of mode is an important problem faced by researchers of Tianjin Sci-tech development. Based on analyzing the situation in Tianjin research activities, the paper proposes a way to solving this problem--the professional mode of the transformation of Sci-tech achievements, illustrates the connotation of the professional mode, and describes the implement environment and the specific operation progress. According to the characteristics of factors in Tianjin, such as society, government, market, industrial technology and so on, the paper designs the professional mode of the transformation of Sci-tech achievements, which is suitable for the characteristics of Tianjin, and which plays an important role in promoting the development of the productive force in science and technology of Tianjin.

A Comparison of the Market Orientation Model in Czech and German High‑Tech Companies

Directory of Open Access Journals (Sweden)

Patrik Jangl

2016-01-01

Full Text Available A Market orientation belongs to the permanent factors of success and even in the periods of economic instability it helps to keep a company in a good condition. This article aims to compare the Czech and German model of market‑orientation of high‑tech companies in the manufacturing industry. the overall index of market orientation in the Czech Republic and Germany is almost identical. Subsequently, invariance was tested using the method of Multigroup Confirmatory Factor Analysis. a comparison of absolute terms of the models shows that significant difference among the coefficients exists in the item regarding obtaining information about competitors – i.e. competitor intelligence generation. the research did not demonstrate statistically significant differences between the models. All criteria consistently confirm configural, metric and partial scalar invariance. the only rejected equivalence is scalar invariance. In this study, therefore, no significant differences were demonstrated between the models of market‑orientation of Czech and German high‑tech companies. There are other studies that deal with the measurement invariance models of market‑oriented high‑tech companies. Using Czech and German data, this work has helped to clarify that the two versions of the measuring instruments (English and Czech are indeed equivalent to each other. Based on the research findings, academics and managers are recommend the use both measuring scales indiscriminately as valid tools for determining the index of market orientation in high‑tech firms in the manufacturing industry. For now, there is no similar or comparable research in the Czech Republic or Germany. For this reason, it seems appropriate to replicate this research in the future, including discussions with authors who deal with the issue of market orientation.

OUTLAY FOR COMMERCIALIZATION OF HIGH-TECH PRODUCTS IN THE CONTEXT OF MARKETING MODELS OF INNOVATION DIFFUSION

Directory of Open Access Journals (Sweden)

O. Zhylinska

2015-08-01

Full Text Available The necessity of identifying the costs for commercialization of high-tech products is revealed based on theoretical assumptions of marketing models of innovation diffusion. The results obtained show the objective nature of the avalanche increase of transaction costs choice, caused by a high level of information asymmetry, which occurs in gaps in lifecycle of high technology products adoption. A development and systematization of marketing measures to bridge the gap in life cycle of high technology products adoption are made in accordance with the economic interests of the dominant categories of consumers.

Green growth: innovative capacity of sme's in the Dutch Greenhouse Horticulture Industry

NARCIS (Netherlands)

dr. MBA S.J.M. (Saskia) Harkema; H.J. (Henk) Schout

2011-01-01

The Dutch greenhouse horticultural industry is characterized by world leadership in high-tech innovation. The dynamics of this playing field are innovation in production systems and automation, reduction in energy consumption and sharing limited space. However, international competitive advantage of

Green networks: innovative capacity of sme's in the Dutch Greenhouse Horticulture Industry

NARCIS (Netherlands)

H.J. (Henk) Schout; dr. MBA S.J.M. (Saskia) Harkema

2011-01-01

The Dutch greenhouse horticulture industry is characterized by world leadership in high-tech innovation. The dynamics of this playing field are innovation in production systems and automation, reduction in energy consumption and sharing limited space. However, international competitive advantage of

E-learning : a high-tech solution to industry training challenges

Energy Technology Data Exchange (ETDEWEB)

Budd, G.

2007-09-15

A web-based e-learning system used to train oilsands upgrading employees was discussed in this article. While the majority of the upgrader's staff had previously worked in the oil and gas industry, many did not have adequate control system training. Use of the system avoided the need for upgrader downtime due to staff shortages during training periods, and avoided the need for on-site instructor-led classes. Savings of over $90,000 were made on a single training course by using the web-based system. A learning content management system (LCMS) was used to develop and customize learning modules so that the software could be customized for use at different facilities. Use of the e-learning system allows staff to mesh training time with regular work schedules and can save companies thousands of hours in training time. Information on the training modules is referenced in a database so that staff members can address new or additional systems, equipment, or technologies. It was concluded that a growing number of companies are using web-based learning systems. 2 figs.

FinTech in Taiwan: a case study of a Bank's strategic planning for an investment in a FinTech company

OpenAIRE

Hung, Jui-long; Luo, Binjie

2016-01-01

Introduction: Since 2015 is the year of FinTech in Taiwan, it is worth investigating the challenges that emerged when banks were encouraged to invest in FinTech companies for collaboration. This study aims to identify the strategic considerations in the process of searching for FinTech investment targets. Case description: This study used a case study investigation of a top-5 bank in Taiwan. The major data sources include the meeting notes of the FinTech investment task force and interviews w...

Do gender and personality traits (BFI-10) influence self-perceived tech savviness?

DEFF Research Database (Denmark)

Sudzina, Frantisek

2015-01-01

Nowadays, it is necessary to use technology in various everyday activities. A certain level of what used to be called high-tech savviness is needed to access certain services. The aim of this paper is to analyze if gender and personality traits (Big Five Inventory-10) influence self-perceived tech...

Creating Value for Customer in Business Networks of High-Tech Goods Manufacturers

Directory of Open Access Journals (Sweden)

Joanna Wiechoczek

2016-01-01

Full Text Available The main paper goal is to recognize the category of value for customer with respect to high-tech products, and to propose a model of creation of this value in business networks established by manufacturers. The research methods include critical analysis of the literature, documentation method, as well as the case research method and observation method. The results of the research proved that the value offered to buyers is characterized by growing multidimensionality which results in increasing complexity of the creation process of this value by their manufacturers. Due to the fact that they do not have complex skills and resources to create the value independently, they form business networks. These networks include increasingly larger group of entities, in which the importance of individual cooperants is highly diversified.

Lesbians and tech: Analyzing digital media technologies and lesbian experience.

Science.gov (United States)

Harris, Angelique; Daniels, Jessie

2017-11-28

The rise of the popular Internet has coincided with the increasing acceptance, even assimilation, of lesbians into mainstream society. The visible presence of lesbians in the tech industry and in digitally mediated spaces raises a set of questions about the relationship between queer identities and Internet technologies. This introduction to a special issue of Journal of Lesbian Studies explores some of these questions and provides an overview of the articles that follow.

Inherently safe technologies-chemical and nuclear

International Nuclear Information System (INIS)

Weinberg, A.M.

1984-01-01

Probabilistic risk assessments show an inverse relationship between the likelihood and the consequences of nuclear and chemical plant accidents, but the Bhopal accident has change public complacency about the safety of chemical plants to such an extent that public confidence is now at the same low level as with nuclear plants. The nuclear industry's response was to strengthen its institutions and improve its technologies, but the public may not be convinced. One solution is to develop reactors which do not depend upon the active intervention of humans of electromechanical devices to deal with emergencies, but which have physical properties that limit the possible temperature and power of a reactor. The Process Inherent Ultimately Safe and the modular High-Temperature Gas-Cooled reactors are two possibilities. the chemical industry needs to develop its own inherently safe design precepts that incorporate smallness, safe processes, and hardening against sabotage. 5 references

Florida Tech professor gets three-year grant

CERN Multimedia

2003-01-01

"Dr. Marc Baarmand, Florida Tech associate professor of physics, has received a three-year grant from the U.S. Department of Energy's Division of High Energy Physics, to conduct research with the Compact Muon Solenoid experiment" (1/3 page).

FinTech in Denmark

OpenAIRE

Hategan, Ramona Anamaria; Mockus, Gytis; Trinkunaite, Sarune

2017-01-01

ABSTRACTThe purpose of this paper has been to seek understanding and knowledge of FinTech phenomenon, with a particular focus on the effect of its emergence on the Danish financial sector. We have attempted to answer our initial research question with the help of a theoretical and methodological framework conceived of concepts belonging to Actor-Network Theory, Diffusion of Innovation Theory and alluding to Foucault’s concepts of power, knowledge and discourses. We have followed FinTech as an...

Security "high-tech" individual extra-light device mask 2.0: CAD/CAM evolution.

Science.gov (United States)

Ramieri, V; Vellone, V; Crimi, S; Cascone, P

2017-06-01

In 2008, we presented our security "high-tech" individual extra-light device mask (SHIELD), a protective shield based on the face cast of an injured soccer player that can be customised. It allows a shortened convalescent period, is comfortable, fits well, and allows the patient to continue to play at a professional level in their chosen sport or activity in the shortest time possible. It has been used often in both amateur and professional categories of many sports, and we now present an update. Copyright © 2017 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

City branding in China's Northeastern region : How do cities reposition themselves when facing industrial decline and ecological modernization?

NARCIS (Netherlands)

Han, M. (Meiling); M. de Jong (Martin); Cui, Z. (Zhuqing); Xu, L. (Limin); H. Lu (Haiyan); Sun, B. (Baiqing)

2018-01-01

textabstractThe past decade has seen a surge in the use of city branding, which is used to attract specific target groups of investors, high-tech green firms and talented workforce and reflects a desired shift from old, polluting manufacturing industries to new, clean service industries. Previous

14th High-Tech Plasma Processes Conference (HTPP 14)

Science.gov (United States)

2017-04-01

Preface The High-Tech Plasma Processes Conference (HTPP) is a bi-annual international conference based in Europe with topics encompassing the whole area of plasma processing science. This conference is open to all the international community in the world involved in plasma science and plasma technology. The aim of the conference is to bring different scientific communities together, facilitate the contacts between science, technology and industry and provide a platform for the exploration of both fundamental topics and new applications of plasmas. For this edition of HTPP, as was the case for the last, we have achieved a well balanced participation from the communities of both thermal and non-thermal plasma researchers. 75 people from 17 countries attended the conference with the total number of contributions being 74, consisting of 19 invited talks and 55 poster contributions. As a HTPP tradition a poster competition has been carried out during the conference. The winner of the poster competition was Fabrice Mavier from Université de Limoges, France with his paper “Pulsed arc plasma jet synchronized with drop-on-demand dispenser” All the participants also ejoyed the social program including an “unconventional” tour of the city, the visit to the famous Hofbräuhaus and the dinner at the Blutenburg, a beautiful inner-city castle. We have received papers corresponding to the contributions of HTPP-2014 that have been submitted for publication in this volume of Journal of Physics: Conference Series. Each submitted contribution has been peer reviewed and the Editors are very grateful to the referees for their careful support in improving the original manuscripts. In total, 18 manuscripts have been accepted for publication covering a range of topics of plasma processing science from plasma fundamentals to process applications through to experiments, diagnostics and modelling. We deeply thank the authors for their enthusiastic and high-grade contributions and we

Mechatronics education at Virginia Tech

Science.gov (United States)

Bay, John S.; Saunders, William R.; Reinholtz, Charles F.; Pickett, Peter; Johnston, Lee

1998-12-01

The advent of more complex mechatronic systems in industry has introduced new opportunities for entry-level and practicing engineers. Today, a select group of engineers are reaching out to be more knowledgeable in a wide variety of technical areas, both mechanical and electrical. A new curriculum in mechatronics developed at Virginia Tech is starting to bring students from both the mechanical and electrical engineering departments together, providing them wit an integrated perspective on electromechanical technologies and design. The course is cross-listed and team-taught by faculty from both departments. Students from different majors are grouped together throughout the course, each group containing at least one mechanical and one electrical engineering student. This gives group members the ability to learn from one another while working on labs and projects.

Integration of Vocational Schools to Industry 4.0 by Updating Curriculum and Programs

OpenAIRE

Durmuş, Ali; Dağlı, Abdulkadir

2018-01-01

In recent years, the industry has been trying tomeet our sectorial requirements in an innovative, reliable and fast manner. Forthis reason, Industry 4.0, this is a new industrial reform that has been linkedto industrialization studies, initiated high-tech strategy, real-time dataprocessing and cyber-physical systems. The first step is to be taken in thefield of education in order for Turkey to develop a qualified workforce, exportthe values it produces and become a country that has a say in b...

Discontentment and knowledge spillovers in an emerging high-tech industry: a study of the emergence of the RFID industry

OpenAIRE

Finn, David J.

2009-01-01

This thesis is an inductive study of how entrepreneurs and their collaborators use or encourage knowledge spillovers to fuel technological innovations during the emergence of a knowledge intensive industry. Drawing on theories of the entrepreneurial process, innovation during industry emergence, and knowledge spillovers, this thesis seeks to explain the process by which entrepreneurs, facing market, organizational and technological uncertainty, use their existing knowledge to procure, share a...

THE IMPACT OF RESEARCH AND DEVELEOPMENT ON REVENUE GENERATION AND INVESTMENT VALUATION OF INFO-TECH CORPORTIONS

OpenAIRE

Doh, Legima E.; Prince, Damian R.

2016-01-01

In today’s rapidly changing business world, it has become imperative for companies to be innovative, in order to stay in business. At the heart of this approach is research and   development (R&D).  While, R&D practices differ across industries and companies, we recognize that the practice is prevalent in the pharmaceutical and the information technology (IT/ info-tech) industries. Despite the fact, that much research has been done on R&D in the pharmaceutical industry...

Is there such a thing as Tech Trans?

DEFF Research Database (Denmark)

Helms, Niels Henrik

2009-01-01

This short paper is an attempt to start a discussion on some basic issues within the concept of Tech Trans especially the relationship between flow and structure within the concept. The background to this paper is first of all an academic interest in the relationship between flow and structure...... explores the concept of Tech Trans, show rooms and innovation systems, and it suggests that the notion of Tech Trans should be defined in the fix point of vertical and horizontal innovation. Finally this paper suggests a mathematical formula for evaluating Tech Trans....

Product Innovation in High-tech SMEs: A Case Study of Weili Electronics Co.,Ltd

Institute of Scientific and Technical Information of China (English)

HE Zheng; LI Shi-ming

2006-01-01

Product innovation is an important strategy for high-tech firms, especially for small and medium enterprises. This paper proposes that the technological strategies for SMEs are dynamic and during different phase, there is different innovation strategy which leads to various market performances. In particular, through the case study of Weili Electronics Co., Ltd, we find that organizational learning abilities play a fundamental role in strategic decision. In addition, the frameworks for the determinants of technological strategies in three stages are established to illustrate the evolutionary processes of product innovation in Weili Electronics Co., Ltd.

City branding in China's Northeastern region : How do cities reposition themselves when facing industrial decline and ecological modernization?

NARCIS (Netherlands)

Han, Meiling; de Jong, W.M.; Cui, Zhuqing; Lu, H.; Sun, Baiqing

2018-01-01

The past decade has seen a surge in the use of city branding, which is used to attract specific target groups of investors, high-tech green firms and talented workforce and reflects a desired shift from old, polluting manufacturing industries to new, clean service industries. Previous studies in

High‐Tech Export from the V4 Countries – Structure and Factors

Directory of Open Access Journals (Sweden)

Judyta Lubacha-Sember

2013-03-01

Full Text Available The purpose of this article is to verify the relation between the value of high‐tech export and the value of intellectual capital assets. At the first stage of the study, an analysis of the value and structure of high‐tech export in the V4 countries was performed. At the second stage, the Synthetic Intellectual Capital Asset Index (ICA was calculated using the Perkal index. At the last stage, in order to examine the relation between the value of high‐tech export and the value of intellectual capital assets, an estimation of panel models for selected variables was performed. The results of analysis show that the value of high‐tech export from the V4 countries varies, and the V4 countries score lower in the ranking of EU countries arranged by the value of ICA is than in the ranking of EU countries arranged by the value of high‐tech export. The  relation  between  the  value  of  high‐tech export and the value of ICA was negative for the V4 countries, but models created with the data for all EU countries showed a positive correlation. Identify the causes of such a situation could be very valuable.  Linking  intellectual  capital  assets to  the  high‐tech export could be helpful to find the sources of the high level of exports in this sector.

Max Tech and Beyond: Maximizing Appliance and Equipment Efficiency by Design

Energy Technology Data Exchange (ETDEWEB)

Desroches, Louis-Benoit; Garbesi, Karina

2011-07-20

It is well established that energy efficiency is most often the lowest cost approach to reducing national energy use and minimizing carbon emissions. National investments in energy efficiency to date have been highly cost-effective. The cumulative impacts (out to 2050) of residential energy efficiency standards are expected to have a benefit-to-cost ratio of 2.71:1. This project examined energy end-uses in the residential, commercial, and in some cases the industrial sectors. The scope is limited to appliances and equipment, and does not include building materials, building envelopes, and system designs. This scope is consistent with the scope of DOE's appliance standards program, although many products considered here are not currently subject to energy efficiency standards. How much energy could the United States save if the most efficient design options currently feasible were adopted universally? What design features could produce those savings? How would the savings from various technologies compare? With an eye toward identifying promising candidates and strategies for potential energy efficiency standards, the Max Tech and Beyond project aims to answer these questions. The analysis attempts to consolidate, in one document, the energy savings potential and design characteristics of best-on-market products, best-engineered products (i.e., hypothetical products produced using best-on-market components and technologies), and emerging technologies in research & development. As defined here, emerging technologies are fundamentally new and are as yet unproven in the market, although laboratory studies and/or emerging niche applications offer persuasive evidence of major energy-savings potential. The term 'max tech' is used to describe both best-engineered and emerging technologies (whichever appears to offer larger savings). Few best-on-market products currently qualify as max tech, since few apply all available best practices and components. The

TechEdSat Nano-Satellite Series Fact Sheet

Science.gov (United States)

Murbach, Marcus; Martinez, Andres; Guarneros Luna, Ali

2014-01-01

TechEdSat-3p is the second generation in the TechEdSat-X series. The TechEdSat Series uses the CubeSat standards established by the California Polytechnic State University Cal Poly), San Luis Obispo. With typical blocks being constructed from 1-unit (1U 10x10x10 cm) increments, the TechEdSat-3p has a 3U volume with a 30 cm length. The project uniquely pairs advanced university students with NASA researchers in a rapid design-to-flight experience lasting 1-2 semesters.The TechEdSat Nano-Satellite Series provides a rapid platform for testing technologies for future NASA Earth and planetary missions, as well as providing students with an early exposure to flight hardware development and management.

Comparative local advantages and technological competitiveness for Italian industry

International Nuclear Information System (INIS)

Palma, Daniela; Zini, Alessandro

2005-01-01

This article describes the evolution of the Italian manufacturing sector's competitiveness over the past ten years and the role played bu the local technology-based comparative advantages in shaping national competitiveness. Data obtained with local-based econometric techniques point to a gradual weakening of core know-how in high-tech industries strongly rooted in the Northwest [it

What Is the Tech Prep/Associate Degree Program?

Science.gov (United States)

Parnell, Dale

1993-01-01

Discusses the nature, importance, and future of the Tech Prep/Associate Degree program. Suggests that these programs must move beyond simple articulation and become aggressive in jointly examining, developing, and sustaining high quality educational programs. (JOW)

Hydrolysis technology for producing sugars from biomass as raw material for the chemical industry - SugarTech

Energy Technology Data Exchange (ETDEWEB)

Siika-aho, M.; Kallioinen, A.; Pakula, T. (and others) (VTT Technical Research Centre of Finland, Espoo (Finland)), email: matti.siika-aho@vtt.fi

2009-10-15

In SugarTech project, spruce, forest residue, birch and sugar cane bagasse have been studied as a raw material for production of sugars to be processed further to ethanol and other chemicals. These raw materials containing high proportion of carbohydrates have been analysed and pretreated for enzyme hydrolysis by steam explosion and oxidative methods. The pretreated materials have been studied in respect to yield and enzymatic hydrolysability. Birch and bagasse could easily be pretreated with steam explosion. Catalytic oxidation treatment of spruce produced material with superior hydrolysability to steam exploded material. Enzyme adsorption and desorption were studied aiming at recycling of enzymes in the hydrolysis process. Purified cellulase enzymes were found to have high tendency to adsorption on lignocellulosic substrate. Adsorption could be decreased by additives, e.g. urea and BSA. In addition, the hydrolytic system of Trichoderma reesei in the presence of different substrates has been studied. (orig.)

New horizons with PET/CT in high-tech radiotherapy planning

International Nuclear Information System (INIS)

Hadjieva, T.

2009-01-01

Full text:The precise delineation of exposed volumes in the high-tech radiotherapy is a major problem. The malignoma imaging was revolutionized by PET. PET became one of the routine imaging methods in developed countries in Europe and USA. PET with 18-FDG, combined with structural and topographic representation of images by CT, currently provides the most reliable information about the location and spread of tumor. Three dimensional radiotherapy planning is a challenge in today's practice and requires the most accurate visualization of the tumor, with its functional characteristics (proliferation activity, hypoxic cells, apoptosis, neoangiogenesis) and surrounding radiosensitive normal tissue and organs. The collected information about the main indications for radiotherapy planning using PET / CT in head and neck cancers , small cell lung carcinoma and some malignant lymphomas has been discussed. The problem of false positive and false negative findings has been also considered. The protocol for 18-FDG PET / CT conducting according to the agreed consensus of the IAEA expert meeting held in 2006 is presented

Business Intelligence from User Generated Content: Online Opinion Formation in Purchasing Decisions in High-Tech Markets

OpenAIRE

Setiya , Karan; Ubacht , Jolien; Cunningham , Scott; Oruç , Sertaç

2016-01-01

Part 6: Data Acquisition, Management and Analytics; International audience; User Generated Content (UGC) requires new business intelligence methods to understand the influence of online opinion formation on customer purchasing decisions. We developed a conceptual model for deriving business intelligence from tweets, based on the Classical Model of Consensus Formation and the Theory of Planned Behaviour. We applied the model to the dynamic high-tech smartphone market by means of three case stu...

A Low-Tech, Low-Budget Storage Solution for High Level Radioactive Sources

Energy Technology Data Exchange (ETDEWEB)

Brett Carlsen; Ted Reed; Todd Johnson; John Weathersby; Joe Alexander; Dave Griffith; Douglas Hamelin

2014-07-01

The need for safe, secure, and economical storage of radioactive material becomes increasingly important as beneficial uses of radioactive material expand (increases inventory), as political instability rises (increases threat), and as final disposal and treatment facilities are delayed (increases inventory and storage duration). Several vendor-produced storage casks are available for this purpose but are often costly — due to the required design, analyses, and licensing costs. Thus the relatively high costs of currently accepted storage solutions may inhibit substantial improvements in safety and security that might otherwise be achieved. This is particularly true in areas of the world where the economic and/or the regulatory infrastructure may not provide the means and/or the justification for such an expense. This paper considers a relatively low-cost, low-technology radioactive material storage solution. The basic concept consists of a simple shielded storage container that can be fabricated locally using a steel pipe and a corrugated steel culvert as forms enclosing a concrete annulus. Benefits of such a system include 1) a low-tech solution that utilizes materials and skills available virtually anywhere in the world, 2) a readily scalable design that easily adapts to specific needs such as the geometry and radioactivity of the source term material), 3) flexible placement allows for free-standing above-ground or in-ground (i.e., below grade or bermed) installation, 4) the ability for future relocation without direct handling of sources, and 5) a long operational lifetime . ‘Le mieux est l’ennemi du bien’ (translated: The best is the enemy of good) applies to the management of radioactive materials – particularly where the economic and/or regulatory justification for additional investment is lacking. Development of a low-cost alternative that considerably enhances safety and security may lead to a greater overall risk reduction than insisting on

Forging Industry Leadtimes: An Analysis of Causes for and Solutions to Long Leadtimes for Aerospace Forgings

Science.gov (United States)

1986-09-01

Pamplet . Forging Industry Association, Cleveland-MT, uncatea. 20. Forging Industry Association, and American Society for Metals. Forging Handbook, edited... Pamplet . The Harris-Thomas Drop Forge Compnyayto--n R, undated. 43. Theeck, Michael F., TECH MOD Program Mana.er. Personal interview. Industrial Base... Brochure . Worcester MA, 3, . 125 "’ VITA Captain Stephen F. O’Neill was born on 19 June 1957 in Pittsfield, Massachusetts. He graduated from high school

The 'Pole Nucleaire Bourgogne' for developing the nuclear components industry

International Nuclear Information System (INIS)

Kottmann, G.

2012-01-01

The 'Pole Nucleaire Bourgogne' (PNB) is a high-technology and heavy industries cluster in Burgundy with an international calling. It aims at innovating, educating and federating in order to place the French nuclear industry in a leading position. PNB gathers 76 small-, and medium-sized enterprises, most of them operating in the metal sector, in design and in the control/measuring sector. The aim of PNB is to make enterprises work and cooperate on specific topics according to their sectors of activities and their skills. PNB has identified 3 domains of strategical innovations: -) ecological manufacturing and durability of heavy components, -) controls for high performance components, and -) maintenance and dismantling techniques in hostile environments. The various industry sectors represented in PNB allows a cross-fertilization between high-tech industries (aeronautics, energy, transportation)

Fee-based services in sci-tech libraries

CERN Document Server

Mount, Ellis

2013-01-01

This timely and important book explores how fee-based services have developed in various types of sci-tech libraries. The authoritative contributors focus on the current changing financial aspects of the sci-tech library operation and clarify for the reader how these changes have brought about conditions in which traditional methods of funding are no longer adequate. What new options are open and how they are best being applied in today's sci-tech libraries is fully and clearly explained and illustrated. Topics explored include cost allocation and cost recovery, fees for computer searching, an

Tech assist/fire safety assessment of 100K area facilities

International Nuclear Information System (INIS)

Johnson, B.H.

1994-01-01

This Tech Assist/Fire Safety Assessment provides a comprehensive assessment of the 100K Area Facilities at the U.S. Department of Energy's Hanford Site for fire protection upgrades that may be needed given the limited remaining service life of these facilities. This assessment considers the relative nature of observed fire risks and whether the installed fire protection systems adequately control this risk. The analysis is based on compliance with DOE Orders, NFPA Codes and Standards, and recognized industry practice. Limited remaining service life (i.e., 6 to 12 years), current value of each facility, comparison to the best protected class of industrial risk, and the potential for exemptions from DOE requirements are key factors for recommendations presented in this report

Vitamin D Status and Quality of Life in Healthy Male High-Tech Employees

Directory of Open Access Journals (Sweden)

Sigal Tepper

2016-06-01

Full Text Available While low vitamin D status has been shown to be associated with decreased quality of life in unhealthy populations and women, only limited data are available regarding healthy adult men. Our aim was to evaluate the associations between health-related quality of life (QoL and vitamin D status in adult men. High-tech employees aged 25–65 year were recruited from an occupational periodic examination clinic at Rambam Health Campus. QoL was assessed using the Centers for Disease Control and Prevention (CDC Health-related quality of life questionnaire (HRQOL-4. Serum 25-hydroxyvitamin D (25(OHD and Body Mass Index (BMI were measured; further information was collected about physical activity, education, sun exposure, sick-days, and musculoskeletal pain severity (visual analog scale. Three hundred and fifty-eight men were enrolled in the study; mean serum 25(OHD level was 22.1 ± 7.9 ng/mL (range 4.6–54.5 ng/mL. In a multivariate logistic regression model, 25(OHD was a significant independent determinant of self-rated health; Odds Ratio (OR for self-rated health was 0.91 (95% confidence interval (CI 0.85–0.97, p = 0.004, adjusted for age, BMI, pain severity, physical activity, and sun exposure. Every 1 ng/mL increase of 25(OHD was associated with 9% reduction in the odds of reporting self-rated health as fair or poor. Poisson regression model demonstrated an association between physically unhealthy days and 25(OHD levels (rate ratio 0.95, p < 0.001. In conclusion, serum levels of 25(OHD were associated with self-rated health and with physically unhealthy days of HRQOL in healthy high-tech male workers. Future intervention studies are required to test the impact of vitamin D supplementation on QoL.

Vitamin D Status and Quality of Life in Healthy Male High-Tech Employees.

Science.gov (United States)

Tepper, Sigal; Dabush, Yael; Shahar, Danit R; Endevelt, Ronit; Geva, Diklah; Ish-Shalom, Sofia

2016-06-15

While low vitamin D status has been shown to be associated with decreased quality of life in unhealthy populations and women, only limited data are available regarding healthy adult men. Our aim was to evaluate the associations between health-related quality of life (QoL) and vitamin D status in adult men. High-tech employees aged 25-65 year were recruited from an occupational periodic examination clinic at Rambam Health Campus. QoL was assessed using the Centers for Disease Control and Prevention (CDC) Health-related quality of life questionnaire (HRQOL-4). Serum 25-hydroxyvitamin D (25(OH)D) and Body Mass Index (BMI) were measured; further information was collected about physical activity, education, sun exposure, sick-days, and musculoskeletal pain severity (visual analog scale). Three hundred and fifty-eight men were enrolled in the study; mean serum 25(OH)D level was 22.1 ± 7.9 ng/mL (range 4.6-54.5 ng/mL). In a multivariate logistic regression model, 25(OH)D was a significant independent determinant of self-rated health; Odds Ratio (OR) for self-rated health was 0.91 (95% confidence interval (CI) 0.85-0.97, p = 0.004), adjusted for age, BMI, pain severity, physical activity, and sun exposure. Every 1 ng/mL increase of 25(OH)D was associated with 9% reduction in the odds of reporting self-rated health as fair or poor. Poisson regression model demonstrated an association between physically unhealthy days and 25(OH)D levels (rate ratio 0.95, p health and with physically unhealthy days of HRQOL in healthy high-tech male workers. Future intervention studies are required to test the impact of vitamin D supplementation on QoL.

Weapons to widgets: Organic systems and public policy for tech transfer

Science.gov (United States)

Cargo, Russell A.

1994-01-01

Large cuts in defense spending cause serious repercussions throughout the American economy. One means to counter the negative effects of defense reductions is to redirect federal dollars to temporarily prop up defense industries and, over the longer-term, stimulate growth of new nondefense industries. The creation of non-defense products and industries by channeling ideas from public laboratories into the private sector manufacturing facilities, known as technology transfer, is being undertaken in a massive program that has high visibility, large amounts of money, and broad federal agency involvement. How effectively federal money can be directed toward stimulating the creation of non-defense products will define the strength of the economy, (i.e., tax base, employment level, trade balance, capital investments, etc.), over the next decade. Key functions of the tech transfer process are technology and market assessment, capital formation, manufacturing feasibility, sales and distribution, and business organization creation. Those, however, are not functions typically associated with the federal government. Is the government prepared to provide leadership in those areas? This paper suggests organic systems theory as a means to structure the public sector's actions to provide leadership in functional areas normally outside their scope of expertise. By applying new ideas in organization theory, can we design government action to efficiently and effectively transfer technologies?

Issues of integrating high-tech concepts into nuclear power plant operation

International Nuclear Information System (INIS)

Kisner, R.A.; Carter, R.J.; Lindsay, R.W.

1990-01-01

The stockpile of new ideas continues to grow for monitoring nuclear power plant parameters, characteristics, and vital signs and for controlling systems, subsystems, and components. This wide selection of monitoring and control software increases the difficulty of designing an integrated control room. As plant control room operators increase their reliance on computerized systems, including real-time plant data and data base systems, the integration of monitoring, diagnostics, and control software into uniform and seamless environment becomes imperative. A systematic approach to evaluating the usefulness of such high-tech control concepts is needed. This paper concentrates on methods to evaluate control concepts by assessing factors that determine a system's potential effectiveness within the context of the overall environment, including both human and machine components. Although not an in-depth study, this paper serves to outline several measures of utility. 21 refs., 3 figs., 2 tabs

Tools of integration of innovation-oriented machine-building enterprises in industrial park environment

Directory of Open Access Journals (Sweden)

К.О. Boiarynova

2017-08-01

Full Text Available The research is devoted to the development of the tools for the integration of innovation-oriented mechanical engineering enterprises into the environment of industrial park as functional economic systems, which are capable on the own development basis to provide the development of resident enterprises. The article analyzes the opportunities for the development of mechanical engineering enterprises. The formed structure of the mechanism of integration of mechanical engineering enterprises as functional economic systems into the industrial park environment is based on: 1 the development of participation programs in the industrial park of the mechanical engineering enterprises as an innovation-oriented partner, which foresees the development of the enterprise immediately and the development of other residents; 2 the provision of high-tech equipment of resident enterprises of industrial parks; 3 the creation of subsidiary-spin-out enterprises of large mechanical engineering enterprises for high-tech production in the industrial park. The author proposes the road map that reveals the procedures for the integration and functioning the investigated enterprises through interaction as well as in the ecosystem of the industrial park and in the general ecosystem of functioning, and the tools for providing economic functionality through economic and organizational proceedings at preventive, partner and resident phases of integration. The tools allow the innovation-oriented mechanical engineering enterprises to integrate into such territorial structures as industrial parks, this in complex will allow carrying out their purposes in the development of the real sector of the economy.

Corporate Turnarounds in the High-tech Industry in UK

OpenAIRE

Xiao, Haixia

2009-01-01

Prior research on corporate turnaround relates to those organizations that have managed to move from poor performance to high performance within a relatively short time period by a case-study approach. The study also explores the role of leadership as a key factor in making turnaround successful as characterized by the change in CEO and in the board of directors. Finally, it explores the incentive systems of those firms during the turnaround. This study analyzed six public companies whic...

Tech Prep Marketing Guide. The Complete Book of Strategies and Practical Experiences.

Science.gov (United States)

Williamson, Patty

This guide explains the concept of marketing tech prep and provides marketing principles and strategies to promote tech prep programs. The guide covers the following topics: (1) why it is necessary to market tech prep; (2) what a comprehensive tech prep marketing plan should include; (3) targeting the benefits message; (4) marketing tech prep to…

TechEdSat

Data.gov (United States)

National Aeronautics and Space Administration — TechEdSat is a 1U CubeSat built by San Jose State University in partnership with NASA Ames Research Center and AAC Microtec. Its mission is to evaluate Space...

Impact of R&D expenditures on research publications, patents and high-tech exports among European countries.

Science.gov (United States)

Meo, S A; Usmani, A M

2014-01-01

This study aimed to compare the impact of Research&Development (R&D) expenditures on research publications, patents and high-tech exports among European countries. In this study, 47 European countries were included. The information regarding European countries, their per capita Gross Domestic Product (GDP), R&D spending, number of universities, indexed scientific journals, high technology exports and number of patents were collected. We recorded the total number of research documents in various science and social sciences subjects during the period 1996-2011. The main source for information was World Bank, Web of Science, Thomson Reuters and SCImago/Scopus. The mean GDP per capita for all the European countries is 23372.64 ± 3588.42 US$, yearly per capita spending on R&D 1.14 ± 0.13 US$, number of universities 48.17 ± 10.26, mean number of Institute of Scientific Information (ISI) indexed journal per country 90.72 ± 38.47, high technology exports 12.86 ± 1.59 and number of patent applications 61504.23 ± 22961.85. The mean of research documents published in various science and social science subjects among all the European countries during the period 1996-2011 is 213405.70 ± 56493.04. Spending on R&D, number of universities, indexed journals, high technology exports and number of patents have a positive correlation with number of published documents in various science and social science subjects. We found a positive correlation between patent application and high-tech exports. However, there was no association between GDP per capita and research outcomes. It is concluded that, the most important contributing factors towards a knowledge based economy are spending on R&D, number of universities, scientific indexed journals and research publications, which in turn give a boast to patents, high technology exports and ultimately GDP.

From scientific instrument to industrial machine : Coping with architectural stress in embedded systems

NARCIS (Netherlands)

Doornbos, R.; Loo, S. van

2012-01-01

Architectural stress is the inability of a system design to respond to new market demands. It is an important yet often concealed issue in high tech systems. In From scientific instrument to industrial machine, we look at the phenomenon of architectural stress in embedded systems in the context of a

TRAINING EMPLOYEES TO WORK WITH HI-TECH EQUIPMENT

Directory of Open Access Journals (Sweden)

M. A. Dremina

2016-01-01

Full Text Available The aim of the study is to describe a research relying on the capabilities of networking, which improves the quality of vocational training of skilled workers that are intended to work with new hi-tech equipment.Methods. Methods of system and comparative analysis, modeling, synthesis and generalization are used. Specification of the model of workers training offered by authors is carried out on the basis of deep interviews to experts – the representatives of the large enterprises who are carrying out training of the personnel.Results. Social and pedagogical contradictions are revealed, on the one hand, in the growing need for highly professional personnel for hi-tech productions, and, on the other hand, in insufficiently effective countermeasures of the system of vocational education and training on closing actual requirements of productions. The discrepancies reducing the quality of preparation of skilled workers are revealed by comparative analysis of competences based on an ideal competence model of the trainer and teacher of VET with the competences presented in educational both professional standards and the discussed projects. Characteristics of the existing pedagogical process in the hi-tech production environment are described. For the purpose of quality improvement of the pedagogical process, the network format of interactions of the enterprise, educational and the business organizations is offered.Scientific novelty. The concept «pedagogical process» for the purpose of making it more instrumental is specified; it joins a technological process and the design of its ideal model for the hi-tech production environment. The unique network project including design and development of innovative manuals and teaching materials for the welding equipment of Fronius International GmbH.Practical significance. The research results can be useful to the management of staff development and career advancement of hi-tech productions, and VET

Wastewater engineering applications of BioIronTech process based on the biogeochemical cycle of iron bioreduction and (biooxidation

Directory of Open Access Journals (Sweden)

Volodymyr Ivanov

2014-12-01

Full Text Available Bioreduction of Fe(III and biooxidation of Fe(II can be used in wastewater engineering as an innovative biotechnology BioIronTech, which is protected for commercial applications by US patent 7393452 and Singapore patent 106658 “Compositions and methods for the treatment of wastewater and other waste”. The BioIronTech process comprises the following steps: 1 anoxic bacterial reduction of Fe(III, for example in iron ore powder; 2 surface renovation of iron ore particles due to the formation of dissolved Fe2+ ions; 3 precipitation of insoluble ferrous salts of inorganic anions (phosphate or organic anions (phenols and organic acids; 4 (biooxidation of ferrous compunds with the formation of negatively, positively, or neutrally charged ferric hydroxides, which are good adsorbents of many pollutants; 5 disposal or thermal regeration of ferric (hydroxide. Different organic substances can be used as electron donors in bioreduction of Fe(III. Ferrous ions and fresh ferrous or ferric hydroxides that are produced after iron bioreduction and (biooxidation adsorb and precipitate diferent negatively charged molecules, for example chlorinated compounds of sucralose production wastewater or other halogenated organics, as well as phenols, organic acids, phosphate, and sulphide. Reject water (return liquor from the stage of sewage sludge dewatering on municipal wastewater treatment plants represents from 10 to 50% of phosphorus load when being recycled to the aeration tank. BioIronTech process can remove/recover more than 90% of phosphorous from this reject water thus replacing the conventional process of phosphate precipitation by ferric/ferrous salts, which are 20–100 times more expensive than iron ore, which is used in BioIronTech process. BioIronTech process can remarkably improve the aerobic and anaerobic treatments of municipal and industrial wastewaters, especially anaerobic digestion of lipid- and sulphate-containing food-processing wastewater. It

Solar hybrid cooling system for high-tech offices in subtropical climate - Radiant cooling by absorption refrigeration and desiccant dehumidification

International Nuclear Information System (INIS)

Fong, K.F.; Chow, T.T.; Lee, C.K.; Lin, Z.; Chan, L.S.

2011-01-01

Highlights: → A solar hybrid cooling system is proposed for high-tech offices in subtropical climate. → An integration of radiant cooling, absorption refrigeration and desiccant dehumidification. → Year-round cooling and energy performances were evaluated through dynamic simulation. → Its annual primary energy consumption was lower than conventional system up to 36.5%. → The passive chilled beams were more energy-efficient than the active chilled beams. - Abstract: A solar hybrid cooling design is proposed for high cooling load demand in hot and humid climate. For the typical building cooling load, the system can handle the zone cooling load (mainly sensible) by radiant cooling with the chilled water from absorption refrigeration, while the ventilation load (largely latent) by desiccant dehumidification. This hybrid system utilizes solar energy for driving the absorption chiller and regenerating the desiccant wheel. Since a high chilled water temperature generated from the absorption chiller is not effective to handle the required latent load, desiccant dehumidification is therefore involved. It is an integration of radiant cooling, absorption refrigeration and desiccant dehumidification, which are powered up by solar energy. In this study, the application potential of the solar hybrid cooling system was evaluated for the high-tech offices in the subtropical climate through dynamic simulation. The high-tech offices are featured with relatively high internal sensible heat gains due to the intensive office electric equipment. The key performance indicators included the solar fraction and the primary energy consumption. Comparative study was also carried out for the solar hybrid cooling system using two common types of chilled ceilings, the passive chilled beams and active chilled beams. It was found that the solar hybrid cooling system was technically feasible for the applications of relatively higher cooling load demand. The annual primary energy

NASA Tech Briefs, February 2009

Science.gov (United States)

2009-01-01

Tech Briefs are short announcements of innovations originating from research and development activities of the National Aeronautics and Space Administration. They emphasize information considered likely to be transferable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. Topics covered include: Measuring Low Concentrations of Liquid Water in Soil; The Mars Science Laboratory Touchdown Test Facility; Non-Contact Measurement of Density and Thickness Variation in Dielectric Materials; Compact Microwave Fourier Spectrum Analyzer; InP Heterojunction Bipolar Transistor Amplifiers to 255 GHz; Combinatorial Generation of Test Suites; In-Phase Power-Combined Frequency Tripler at 300 GHz; Electronic System for Preventing Airport Runway Incursions; Smaller but Fully Functional Backshell for Cable Connector; Glove-Box or Desktop Virtual-Reality System; Composite Layer Manufacturing with Fewer Interruptions; Improved Photoresist Coating for Making CNT Field Emitters; A Simplified Diagnostic Method for Elastomer Bond Durability; Complex Multifunctional Polymer/Carbon-Nanotube Composites; Very High Output Thermoelectric Devices Based on ITO Nanocomposites; Reducing Unsteady Loads on a Piggyback Miniature Submarine; Ultrasonic/Sonic Anchor; Grooved Fuel Rings for Nuclear Thermal Rocket Engines; Pulsed Operation of an Ion Accelerator; Autonomous Instrument Placement for Mars Exploration Rovers; Mission and Assets Database; TCP/IP Interface for the Satellite Orbit Analysis Program (SOAP); Trajectory Calculator for Finite-Radius Cutter on a Lathe; Integrated System Health Management Development Toolkit.

Removal of contaminants from equipment and debris and waste minimization using TechXtract{reg_sign} technology

Energy Technology Data Exchange (ETDEWEB)

Bonem, M.W. [EET, Inc., Bellaire, TX (United States)

1997-10-01

Under this Program Research and Development Agreement (PRDA), EET, Inc., is extending its proprietary TechXtract{reg_sign} chemical decontamination technology into an effective, economical, integrated contaminant removal system. This integrated system will consist of a series of decontamination baths using the TechXtract{reg_sign} chemical formulas, followed by a waste treatment process that will remove the contaminants from the spent chemicals. Sufficient decontamination will result so that materials can be released without restriction after they have been treated, even those materials that have traditionally been considered to be {open_quotes}undecontaminable.{close_quotes} The secondary liquid waste will then be treated to separate any hazardous and radioactive contaminants, so that the spent chemicals and wastewater can be discharged through conventional, permitted outlets. The TechXtract{reg_sign} technology is a unique process that chemically extracts hazardous contaminants from the surface and substrate of concrete, steel, and other solid materials. This technology has been used successfully to remove contaminants as varied as PCBs, radionuclides, heavy metals, and hazardous organics. The process` advantage over other alternatives is its effectiveness in safe and consistent extraction of subsurface contamination. TechXtract{reg_sign} is a proprietary process developed, owned, and provided by EET, Inc. The objective of the PRDA is to demonstrate on a full-scale basis an economical system for decontaminating equipment and debris, with further treatment of secondary waste streams to minimize waste volumes. Contaminants will be removed from the contaminated items to levels where they can be released for unrestricted use. The entire system will be designed with maximum flexibility and automation in mind.

Removal of contaminants from equipment and debris and waste minimization using TechXtract reg-sign technology

International Nuclear Information System (INIS)

Bonem, M.W.

1997-01-01

Under this Program Research and Development Agreement (PRDA), EET, Inc., is extending its proprietary TechXtract reg-sign chemical decontamination technology into an effective, economical, integrated contaminant removal system. This integrated system will consist of a series of decontamination baths using the TechXtract reg-sign chemical formulas, followed by a waste treatment process that will remove the contaminants from the spent chemicals. Sufficient decontamination will result so that materials can be released without restriction after they have been treated, even those materials that have traditionally been considered to be open-quotes undecontaminable.close quotes The secondary liquid waste will then be treated to separate any hazardous and radioactive contaminants, so that the spent chemicals and wastewater can be discharged through conventional, permitted outlets. The TechXtract reg-sign technology is a unique process that chemically extracts hazardous contaminants from the surface and substrate of concrete, steel, and other solid materials. This technology has been used successfully to remove contaminants as varied as PCBs, radionuclides, heavy metals, and hazardous organics. The process' advantage over other alternatives is its effectiveness in safe and consistent extraction of subsurface contamination. TechXtract reg-sign is a proprietary process developed, owned, and provided by EET, Inc. The objective of the PRDA is to demonstrate on a full-scale basis an economical system for decontaminating equipment and debris, with further treatment of secondary waste streams to minimize waste volumes. Contaminants will be removed from the contaminated items to levels where they can be released for unrestricted use. The entire system will be designed with maximum flexibility and automation in mind

Hydrolysis technology for producing sugars from biomass as raw material for the chemical industry - SugarTech

Energy Technology Data Exchange (ETDEWEB)

Kallioinen, A.; Haekkinen, M.; Pakula, T. (and others) (VTT Technical Research Centre of Finland, Espoo (Finland)), Email: anne.kallioinen@vtt.fi

2010-10-15

In SugarTech project, spruce, forest residue, birch and sugar cane bagasse have been studied as a raw material for production of sugars to be processed further to ethanol and other chemicals. These raw materials containing high proportion of carbohydrates have been analysed and pretreated for enzyme hydrolysis by steam explosion and oxidative methods. The pretreated materials have been studied in respect to yield and enzymatic hydrolysability. Birch and bagasse could easily be pretreated with steam explosion. Catalytic and alkaline oxidation treatment of spruce produced material with superior hydrolysability to steam exploded material. Enzyme adsorption and desorption were studied with lignocellulosic substrates aiming at recycling of enzymes in the hydrolysis process. After enzymatic hydrolysis, a major part of the enzymes remained bound to substrate in spite of high degree of hydrolysis. Desorption of enzymes could be detected only with catalytically oxidised spruce. In addition, the hydrolytic system of Trichoderma reesei, which is a widely used fungus for cellulase enzyme production, has been studied in the presence of different substrates. The substrate and the pretreatment method had clear effects on gene expression profile. (orig.)

Try it, you’ll like it—or will you? : The perils of early free-trial promotions for high-tech service adoption

NARCIS (Netherlands)

Foubert, B.; Gijsbrechts, Els

The proliferation of free trials for high-tech services calls for a careful study of their effectiveness, and the drivers thereof. On the one hand, free trials can generate new paying subscribers, by allowing consumers to become acquainted with the service free of charge. On the other hand, a

TechTrends 2010-2015: A Content Analysis

Science.gov (United States)

Stauffer, Eric

2017-01-01

This study is a content analysis of articles published within the journal "TechTrends" from 2000 to 2015. The study reveals that the publication "TechTrends" has increased the overall number of peer reviewed original papers over the last 6 years. The author describes the proportion of these original papers per volume and…

76 FR 68243 - Youth Leadership Program: TechGirls

Science.gov (United States)

2011-11-03

..., job shadowing, mini-internships, and/or site visits to high tech companies in the United States... Exempt From Income Tax,'' must include a copy of relevant portions of this form. (2) Those who do not... participants or partners and be able to respond to key evaluation questions, including satisfaction with the...

A new myocardial imaging agent: Synthesis, characterization, and biodistribution of gallium-68-BAT-TECH

International Nuclear Information System (INIS)

Kung, H.F.; Liu, B.L.; Mankoff, D.; Kung, M.P.; Billings, J.J.; Francesconi, L.; Alavi, A.

1990-01-01

In order to develop a new myocardial perfusion agent for positron emission tomography (PET), a new lipid-soluble gallium complex was evaluated. Synthesis, radiolabeling, characterization, and biodistribution of a unique gallium complex, [ 67 Ga]BAT-TECH (bis-aminoethanethiol-tetraethyl-cyclohexyl), are described. The complex formation between Ga+3 and BAT-TECH ligand is simple, rapid, and of high yield (greater than or equal to 95%). This process is amenable to kit formulation. The complex has a net charge of +1 and a Ga/ligand ratio of 1:1. Biodistribution in rats shows high uptake in the heart as well as in the liver. When [ 68 Ga] BAT-TECH was injected into a monkey, the heart and liver are clearly delineated by PET imaging, suggesting that this complex may be a possible tracer for myocardial perfusion imaging

Learning to Trust. On the Treasure Coast, Tech Prep Proves a Trove for Educators Long Divided.

Science.gov (United States)

Winterburn, Patty

1995-01-01

Based on the "High Schools That Work" model, the Quad County Tech Prep Consortium in Florida has won several awards for its comprehensive tech prep program. The partnership enables technical students from four school districts to flow smoothly into an associate degree program at Indian River Community College. (JOW)

Hi-Tech Skills Anticipation for Sustainable Development in Russia

Directory of Open Access Journals (Sweden)

Valery Gurtov

2014-12-01

Full Text Available It is evident that there is a heightened importance in Russia attributed to ensuring that students develop skills, which will enable them to be more productive and engaged citizens. This article deals with a skills anticipation methodology for seven hi-tech industries in Russia that resulted in the development of models for both soft and hard skills. There is a variety of widely applied methods – qualitative projection of labor market parameters, desk studies, documents analysis, foresight sessions, employers' and experts' surveys. As a result, new skills models are to help the specialists to effectively overcome the challenges, apply innovative decisions, and increase their technological knowledge.

Female Employment in Military Industrial Complex Enterprises of Post-Soviet Russia

Directory of Open Access Journals (Sweden)

Oxana A. Demchenkova

2013-12-01

Full Text Available Reforms in Russian industry caused by disintegration of the USSR had a strong negative effect on military-industrial complex. Pre-reform Russian economy possessed a powerful efficient system of high-tech industries with defense industry being a core of the system in view of the government tasks which defense industry should effectively respond to. The defense industry accumulated elite of the labor force, highly skilled and educated workers. Socioeconomic and political transformation in Russian society resulted in significant qualitative and quantitative changes in human capital of military-industrial complex. The number of employees was cut down. Highly skilled workers turned out to be unemployed. In tough competition for working places caused by contraction of industrial production women turned out to be in the most vulnerable position. In this article results of the survey and documents analysis conducted by the author are looked at with gender perspective. The aim is to identify the basic trends in female employment in military-industrial complex of post-Soviet Russia. Job security, level of wages and managerial career chances for women are considered.

Cookbooks, High-tech Kitchens and Gender Culture: addressing the sugar and spice in the contemporary couple relations

OpenAIRE

Costa, Rosalina

2013-01-01

This text focuses on the cookbook and related “mundane practices” (Martens) within the context of the appropriation of high-tech equipment in the kitchen to discuss the power of the socialisation of gender. Our argument is that cookbooks can be a way to dissipate the old difficulties that men, particularly, face in the kitchen; and at the same time, their use (and misuse) reinforces the persistence of some gaps due to previous and unequal socialisation regarding cookery as a skill.

FinTech transformation: how it-enabled innovations shape the financial sector

OpenAIRE

Zavolokina, Liudmila; Dolata, Mateusz; Schwabe, Gerhard

2016-01-01

FinTech, the phenomenon which spans over the areas of information technologies and financial innovation, is currently on the rise and is gaining more and more attention from practitioners, investors and researchers. FinTech is broadly discussed by the media, which constitutes its understanding and represents social opinion, however, this perception of FinTech should be supported by empirical evidences. Therefore, we examine five Swiss FinTech companies through the lens of the conceptual frame...

A strategy to assist management in workforce engagement and employee retention in the high tech engineering environment.

Science.gov (United States)

Kennedy, Elizabeth; Daim, Tugrul U

2010-11-01

Many companies use survey methods in an attempt to gauge employees' attitudes and opinions toward the company. These attitudes and opinions are directly related to an employee's engagement within the company. In many instances, employees wait in vain for the survey response and the subsequent employer actions, but the truth is sometimes management does not know what to do with the results. For this reason, we theorize that this type of survey, typically utilizing the Likert-scale, is not adequately assisting management in addressing employee engagement and retention issues. For instance, in many occasions, once the survey results are tabulated, companies are doing little or nothing to address the issues. In fact, far too many companies make the mistake of conducting employee engagement surveys, and then ignore the answers. Thus, we propose that a company should take advantage of the survey results, and utilize them to provide data to bridge employees' needs and goals with stakeholders' responsibilities and goals by refining and incorporating them into a hierarchical decision model (HDM). Thus, this would essentially be utilizing the quantitative data to determine what to measure qualitatively. We use a case from the high tech industry, specifically focusing on the engineering environment. Engineering environments are known to be more creative and such approaches would be more beneficial. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

STUDY ON PARTICULAR FEATURES OF RUSSIAN INNOVATIVE INDUSTRIAL CORPORATIONS DEVELOPMENT AND FUNCTIONING

Directory of Open Access Journals (Sweden)

A. A. Astakhov

2011-01-01

Full Text Available Owing to globalization and world economic crisis consequences, present stage of economic development of Russian industrial corporations presumably belonging to the military industrial complex and to the high-tech sector of economy is characteristic with toughened competition.At the same time, these industrial enterprises endure fundamental transformations aimed at manufacture of innovative production. Under these conditions, a scientific/methodological deficiency formed in the field of financial and economic management of the corporations. Key problems are discussed whose solution may facilitate working out specialized organizational and economic strategic management mechanism for innovative development of the corporations.

Polyfire project- an example of an industrial research project promoting safe industrial production of fire-resistant nanocomposites

International Nuclear Information System (INIS)

Vaquero, C; Lopez de Ipina, J; Galarza, N; Hargreaves, B; Weager, B; Breen, C

2011-01-01

New developments based on nanotechnology have to guarantee safe products and processes to be accepted by society. The Polyfire project will develop and scale-up techniques for processing halogen-free, fire-retardant nanocomposite materials and coatings based on unsaturated polyester resins and organoclays. The project includes a work package that will assess the Health and Environmental impacts derived from the manipulation of nanoparticles. This work package includes the following tasks: (1) Identification of Health and Environment Impacts derived from the processes, (2) Experimentation to study specific Nanoparticle Emissions, (3) Development of a Risk Management Methodology for the process, and (4) A Comparison of the Health and Environmental Impact of New and Existing Materials. To date, potential exposure scenarios to nanomaterials have been identified through the development of a Preliminary Hazard Analysis (PHA) of the new production processes. In the next step, these scenarios will be studied and simulated to evaluate potential emissions of nanomaterials. Polyfire is a collaborative European project, funded by the European Commission 7th Framework Programme (Grant Agreement No 229220). It features 11 partners from 5 countries (5 SMEs, 3 research institutes, 2 large companies, 1 association) and runs for three years (1st September 2009 - 31st August 2012). This project is an example of an industrial research development which aims to introduce to the market new products promoting the safe use of nanomaterials.

Polyfire project- an example of an industrial research project promoting safe industrial production of fire-resistant nanocomposites

Energy Technology Data Exchange (ETDEWEB)

Vaquero, C; Lopez de Ipina, J; Galarza, N [TECNALIA, Leonardo Da Vinci No 11, 01510 Minano (Alava) (Spain); Hargreaves, B; Weager, B [NetComposites Ltd, 4A Broom Business Park, Chesterfield S41 9QG (United Kingdom); Breen, C, E-mail: celinav@leia.es [Materials and Engineering Research Institute, Sheffield Hallam University, Sheffield S1 1WB (United Kingdom)

2011-07-06

New developments based on nanotechnology have to guarantee safe products and processes to be accepted by society. The Polyfire project will develop and scale-up techniques for processing halogen-free, fire-retardant nanocomposite materials and coatings based on unsaturated polyester resins and organoclays. The project includes a work package that will assess the Health and Environmental impacts derived from the manipulation of nanoparticles. This work package includes the following tasks: (1) Identification of Health and Environment Impacts derived from the processes, (2) Experimentation to study specific Nanoparticle Emissions, (3) Development of a Risk Management Methodology for the process, and (4) A Comparison of the Health and Environmental Impact of New and Existing Materials. To date, potential exposure scenarios to nanomaterials have been identified through the development of a Preliminary Hazard Analysis (PHA) of the new production processes. In the next step, these scenarios will be studied and simulated to evaluate potential emissions of nanomaterials. Polyfire is a collaborative European project, funded by the European Commission 7th Framework Programme (Grant Agreement No 229220). It features 11 partners from 5 countries (5 SMEs, 3 research institutes, 2 large companies, 1 association) and runs for three years (1st September 2009 - 31st August 2012). This project is an example of an industrial research development which aims to introduce to the market new products promoting the safe use of nanomaterials.

Dependability for high-tech systems: an industry-as-laboratory approach

NARCIS (Netherlands)

Brinksma, Hendrik; Hooman, J.

2007-01-01

The dependability of high-volume embedded systems, such a consumer electronic devices, is threatened by a combination of quickly increasing complexity, decreasing time-to-market, and strong cost constraints. This poses challenging research questions that are investigated in the Trader project,

Dependability for high-tech systems: An Industry-as-laboratory approach

NARCIS (Netherlands)

Brinksma, E.; Hooman, J.J.M.

2008-01-01

The dependability of high-volume embedded systems, such a consumer electronic devices, is threatened by a combination of quickly increasing complexity, decreasing time-to-market, and strong cost constraints. This poses challenging research questions that are investigated in the Trader project,

Dependability for high-tech systems: an industry-as-laboratory approach

NARCIS (Netherlands)

Brinksma, Hendrik; Hooman, Jozef

2008-01-01

The dependability of high-volume embedded systems, such a consumer electronic devices, is threatened by a combination of quickly increasing complexity, decreasing time-to-market, and strong cost constraints. This poses challenging research questions that are investigated in the Trader project,

Understanding the role of attitude components in co-branding: an application to high-tech, luxury co-branded products

OpenAIRE

Lado Couste, Nora Rita; Césaroni, Fabrizio; Maydeu Olivares, Alberto; Ho, Han Chiang

2011-01-01

This study addresses co-branding between firms belonging to unrelated value chains –high-tech products and luxury brands (HLCPs) – to explore how consumers‟ attitude drive the success of HLCPs. The study applies the tri-component attitude model (as opposed to attitude as a whole) that uses affect and cognition to predict purchase intention of co-branded products. Cultural differences (Spanish and Taiwanese) in consumers‟ behavior are also assessed. Data collected in a survey show that Spanish...

The ARGO Project: assessing NA-TECH risks on off-shore oil platforms

Science.gov (United States)

Capuano, Paolo; Basco, Anna; Di Ruocco, Angela; Esposito, Simona; Fusco, Giannetta; Garcia-Aristizabal, Alexander; Mercogliano, Paola; Salzano, Ernesto; Solaro, Giuseppe; Teofilo, Gianvito; Scandone, Paolo; Gasparini, Paolo

2017-04-01

ARGO (Analysis of natural and anthropogenic risks on off-shore oil platforms) is a 2 years project, funded by the DGS-UNMIG (Directorate General for Safety of Mining and Energy Activities - National Mining Office for Hydrocarbons and Georesources) of Italian Ministry of Economic Development. The project, coordinated by AMRA (Center for the Analysis and Monitoring of Environmental Risk), aims at providing technical support for the analysis of natural and anthropogenic risks on offshore oil platforms. In order to achieve this challenging objective, ARGO brings together climate experts, risk management experts, seismologists, geologists, chemical engineers, earth and coastal observation experts. ARGO has developed methodologies for the probabilistic analysis of industrial accidents triggered by natural events (NA-TECH) on offshore oil platforms in the Italian seas, including extreme events related to climate changes. Furthermore the environmental effect of offshore activities has been investigated, including: changes on seismicity and on the evolution of coastal areas close to offshore platforms. Then a probabilistic multi-risk framework has been developed for the analysis of NA-TECH events on offshore installations for hydrocarbon extraction.

IMPACT OF TECHNOLOGICAL INNOVATION ON THE GROWTH OF INTERNATIONALIZED SMALL ENTERPRISES: A CASE STUDY BASED ON TECH-BASED INTERNATIONALIZED SEAFOOD PROCESSING SMALL ENTERPRISES OF PUTTALAM DISTRICT IN SRI LANKA

Directory of Open Access Journals (Sweden)

W.M.S.N. Fernando

2018-03-01

Full Text Available The main aim of this study is to identify the impact of Technological Innovation (Technopreneurship on Enterprise Growth with special concern on tech-based internationally oriented Seafood Processing SEs in Puttalam district of Sri Lanka as the existing gap of this research’s scope is very much high in Puttalam district. This research considers mainly four types of Technological Innovation based on Machine Technology, Computerized Operations, Mobile Technologies and Other Communication Media Technologies. From the sample of 33 tech-based internationally oriented Seafood Processing SEs out of the total population of 39, primary data is collected using a questionnaire followed by a Descriptive plus an Ordered Logistic Regression Analysis was performed. According to the results, the growth of Machine Technology, Computerized Operations, Mobile Technologies and Other Communication Media based Technological Innovation (Technopreneurship lead for Enterprise Growth. The more current the extents of Machine, Computerized Operations, Mobile and Other Communication technologies, the higher the positive contribution for Technological Innovation performance. Also, the Machine Technology Usage is high thus the Innovation performance based on Machine Technology is almost 50% while the Computerized Operations Usage is low. Among the users, the Innovation performance is at a higher level. Present Mobile Technologies Usage is high, thus the Innovation performance based on Mobile Technologies is almost 55%. Though the Other Communication Media Usage is high, only 53% performed innovation. Inadequate finance, poor awareness on international market conditions, lack of the knowledge and trust along with inadequate infrastructure are identified as the main reasons for the lower orientation of internationally oriented Seafood Processing SEs. To promote tech-based internationally oriented Seafood Processing SEs in Puttalam district, providing tech-education among SE

High Blood Pressure and Cold Remedies: Which Are Safe?

Science.gov (United States)

... counter cold remedies safe for people who have high blood pressure? Answers from Sheldon G. Sheps, M.D. Over- ... remedies aren't off-limits if you have high blood pressure, but it's important to make careful choices. Among ...

Libraries as a venue for exciting education technology, both high tech and low

Science.gov (United States)

Harold, J. B.; Dusenbery, P.; Holland, A.

2016-12-01

Public libraries provide a broad range of possibilities for reaching diverse audiences with NASA and STEM related content and activities, from hands-on activities, to interactive kiosks incorporating science based games, simulations, and real-time data. NCIL/SSI has been developing STEM-based exhibits and program activities for public libraries since 2007, and is currently managing 7 national tours in partnership with the American Library Association and other organizations. Past and current exhibitions will reach over 100 libraries and an estimated 1.5 million patrons. In this paper we will discuss a range of findings from almost a decade of deploying both high and low tech STEM learning strategies into libraries, including usage and engagement by library patrons, and challenges (and solutions) for deploying technologically sophisticated components into libraries which may or may not have dedicated technical staff.

Strategic Alliances in the European Industries of the Third Industrial Revolution

Directory of Open Access Journals (Sweden)

Angel Calvo

2016-07-01

Full Text Available The dimension of the alliances has compelled experts to revise their preconceptions about the internationalization of companies and to include this strategy in their models as Uppsala model was forced to acknowledge. This article focuses on one of the alliances forged in Europe, very deviated from the practices of the majority because it was a company with exclusively European partners. It adopts the perspective of a peripheral country (Spain in the global economy and from the special status of at least one of the partners in a monopoly. Finally, the article follows case study methodology, which aims to delve into the complexity of the processes and the phenomena at hand. The article responds to the need for an alternative approach to industry analysis that is particularly important for technology-based industries and the most turbulent high-tech industries.  The first section examines the creation of European Silicon Structures as a strategic alliance in the European semiconductor industry. Parts two and three look at the case of Spain and the role of demand using the example of Telefonica. Conclusions are presented in the final section.

Arkansas Tech University TRIGA nuclear reactor

International Nuclear Information System (INIS)

Sankoorikal, J.; Culp, R.; Hamm, J.; Elliott, D.; Hodgson, L.; Apple, S.

1990-01-01

This paper describes the TRIGA nuclear reactor (ATUTR) proposed for construction on the campus of Arkansas Tech University in Russellville, Arkansas. The reactor will be part of the Center for Energy Studies located at Arkansas Tech University. The reactor has a steady state power level of 250 kW and can be pulsed with a maximum reactivity insertion of $2.0. Experience gained in dismantling and transporting some of the components from Michigan State University, and the storage of these components will be presented. The reactor will be used for education, training, and research. (author)

The development of the Czech Republic electric industry - Reliable, safe and responsible source mix

Energy Technology Data Exchange (ETDEWEB)

Vrba, Miroslav; Jez, Jiri; Ptacek, Jiri

2010-09-15

The paper focuses on the development of the Czech Republic electric industry in close perspective and the prediction of its expected future in period up to 2030. The goal of the paper is to specify methods and procedures applied within periodic assessment of Czech electric power sector balance outlook for the State authorities. A necessity to respect economic recession and politicization of the issue of power sector development has invoked that these items are added to commonly used procedures. A key criterion is the reliable and safe electricity supply by adequate source mix for acceptable prices and environmental aspects.

Ball handling system for tech united soccer robots

NARCIS (Netherlands)

Gerrits, K.P.; Molengraft, van de M.J.G.; Hoogendijk, R.; Steinbuch, M.

2012-01-01

This pre-master end project is done for team Tech United of Eindhoven University of Technology. The Tech United team is a group of students and employees who design, build and program soccer robots to compete in the RoboCup Middle Size League. RoboCup is a worldwide competition in which two teams of

P.S. I love you...and other growth hacking strategies used by disruptive tech start-ups : A case study on the relevance and enactment of growth hacking by Sweden's tech start-ups

OpenAIRE

Bergendal, Taghrid Sara

2017-01-01

Disruption innovation theory has been the zeitgeist for building globally disruptive tech companies since 1997. One decade later, disruptive tech start-ups are moving away from traditional marketing strategies in favour of growth hacking. There is a seemingly growing consensus by online tech experts, tech entrepreneurs, advisors and investors, that suggests that growth hacking is becoming increasingly important practice for disruption based tech start-ups. Furthermore, Sweden is becoming the ...

Routine check and annual maintenance for industrial radiography gamma projector

International Nuclear Information System (INIS)

Shaharudin Sayuti; Abdul Nassir Ibrahim; Sukhri Ahmad; Arshad Yassin; Mohd Junaidi Jaapar; Khairul Anuar Mohd Salleh; Abdul Razak Hamzah

2009-04-01

The main objective of this paper is to share some experience pertaining to gamma projector maintenance programme. In Malaysia there are more than 100 gamma projectors, which need to be maintenance annually. Most of these projectors are Tech-Ops 660 series portable gamma radiography systems, which are used primarily for industrial radiography. The portability feature of the system provides both a safe means of transporting the radioactive source and operating flexibility, particularly useful in areas where access is limited. Generally, the national authorised service centre carries out the annual inspection of this system. In Malaysia, Malaysian Nuclear Agency has been recognised as the National Gamma Projector Maintenance Centre by the Atomic Energy Licensing Board (AELB). In this paper, a brief review of the design and operation is included in the discussion of the maintenance procedure, limitations and improvements of the gamma projector maintenance programme. (author)

Land Combat Systems Industry. Industry Study, Spring 2009

Science.gov (United States)

2009-01-01

such a technology hastened to production that might cause what the government tends to call “technological surprise” is Friction Stir Welding . This...Success Stories. “ Friction Stir Welding of Aluminum Armor”. March 2002. Available online: http://www.onr.navy.mil/sci_tech/3t/mantech/docs...supply tenders as well as other factors.4 Competition in the industry is typically low and steady, but affected by increased LCS funding along with the

TurboTech Technical Evaluation Automated System

Science.gov (United States)

Tiffany, Dorothy J.

2009-01-01

TurboTech software is a Web-based process that simplifies and semiautomates technical evaluation of NASA proposals for Contracting Officer's Technical Representatives (COTRs). At the time of this reporting, there have been no set standards or systems for training new COTRs in technical evaluations. This new process provides boilerplate text in response to interview style questions. This text is collected into a Microsoft Word document that can then be further edited to conform to specific cases. By providing technical language and a structured format, TurboTech allows the COTRs to concentrate more on the actual evaluation, and less on deciding what language would be most appropriate. Since the actual word choice is one of the more time-consuming parts of a COTRs job, this process should allow for an increase in quantity of proposals evaluated. TurboTech is applicable to composing technical evaluations of contractor proposals, task and delivery orders, change order modifications, requests for proposals, new work modifications, task assignments, as well as any changes to existing contracts.

Job Future's Bright for the Chefs of Muskingum Tech.

Science.gov (United States)

Hoffman, Carl

1993-01-01

A two-year culinary arts program at Muskingum College (Zanesville, Ohio) prepares students for jobs in an emerging service-based economy. Students receive intensive classroom instruction and hands-on learning in a high-tech kitchen. Twenty-five full-time and 12 part-time students are completing their first year in the program. (LP)

The Wassenaar Arrangement and Russian High-Tech Export

Directory of Open Access Journals (Sweden)

Lilia S. Revenko

2016-01-01

Full Text Available The current military and political situation in the world raises the necessity of use by Russia of all existing tools to counter actions targeted against it. Participation of the country in international export control regimes, including the Wassenaar Arrangement (the WA, is one of these tools. Membership in the WA allows to Russia to maintain its international status, to contribute to strengthening of international stability, to ensure the non-targeting of this forum against the country, to participate in the development of decisions affecting its interests. Participation in the WA is also important from the view of modernizations of Russian economy towards transition to a new technological mode accompanied by emergence of new groups of innovative products and modification of existing ones. Control of crossing the country's borders by dual-use goods and services is one of conditions for carrying out their export. The Wassenaar Arrangement was established in 1995 to replace COCOM in order to contribute to regional and international security and stability. A huge work is carried out within the forum aimed at enhancing control over transfers of conventional weapons and high-tech dual-use goods. Russian export control system fully meets requirements of international export control regime, including the WA, and effectively functions. Export of the controlled goods from Russia or their transfer to foreign individuals and legal entities are possible only on the basis of decisions of the Export control Commission of the Russian Federation. The dilemma between the need to support exporters by reducing administrative barriers and the ensuring security interests of the country gain momentum in current stage of scientific-and-technological advance development.

Industry 4.0 and SMEs in the Northern Jutland Region

DEFF Research Database (Denmark)

Decker, Arnim

2017-01-01

into the category of a knowledge-based society with a good educational infrastructure, Industry 4.0-related opportunities can provide a significant boost to the local economy if tackled in the right way and contribute to market development and international expansion. However, a variety of factors, such as relative......Being located in the Northern periphery, the economic structure of the Northern part of the Jutland Peninsula in Denmark is characterized by a relatively large proportion of firms operating in diverse industrial sectors. A minor proportion of those are high growth companies with a signifi- cant...... presence on international markets. Local firms operate in a diversity of industrial sectors, which are characterized by medium to high tech- nological intensity. According to the Danish government, Danish firms cannot compete with foreign competitors based on low salaries alone because...

Hydrolysis technology for producing sugars from biomass as raw material for the chemical industry- SugarTech

Energy Technology Data Exchange (ETDEWEB)

Kallioinen, A.; Hytoenen, E.; Haekkinen, M. (VTT Technical Research Centre of Finland, Espoo (Finland)), email: anne.kallioinen@vtt.fi (and others)

2011-11-15

In the SugarTech project, spruce, forest residue, birch and sugar cane bagasse have been studied as raw materials for production of sugars to be processed further to ethanol or other chemicals. These raw materials, containing high proportion of carbohydrates have been analysed and pretreated for enzymatic hydrolysis by steam explosion and oxidative methods. The pretreated materials have been studied in respect to yield and enzymatic hydrolysability. Small carboxylic acids were an interesting side product from oxidation pretreatment. For feasibility study, 8 process cases have been selected and will be compared. Optimal enzyme mixtures have been determined for hydrolysis of pretreated materials. Results show that optimal enzyme composition depends clearly on the raw material and the pretreatment method. Pretreated raw materials were also hydrolysed efficiently in high dry matter conditions with commercial enzymes. Enzyme adsorption and desorption were studied with lignocellulosic substrates aiming at recycling of enzymes in the hydrolysis process. After enzymatic hydrolysis, a major part of the enzymes remained bound to substrate in spite of high degree of hydrolysis. Desorption of enzymes could only be detected with catalytically oxidised spruce. In addition, the induction of hydrolytic system of Trichoderma reesei, which is a widely used fungus for cellulase enzyme production, has been studied in the presence of different substrates. The substrate and the pretreatment method had clear effects on gene expression profile. (orig.)

Yield oil of Jatropha curcas seeds of trees irrigated and fertilized with OMM-Tech; Rendimento de oleo de sementes de pinhao manso submetido a irrigacao e adubacao com OMM-Tech

Energy Technology Data Exchange (ETDEWEB)

Evangelista, Adao W.P.; Alves Junior, Jose; Barbosa, Ricardo A.F.; Frazao, Joaquim J.; Araujo, Fausto J.M. [Universidade Federal de Goias (UFG), Goiania, GO (Brazil). Escola de Agronomia e Engenharia de Alimentos. Setor de Engenharia Rural], E-mail: awpego@bol.com.br

2010-07-01

The purpose of this study was to evaluate the effects of irrigation and application of Organo-Minerals-Marine + Biotech (OMM-Tech) in yield oil of Jatropha curcas seeds. The experiment was conducted in an experimental area located in Federal University of Lavras, Brazil. A randomized block experimental design with subdivided parcels and three replications was used. The parcels were submitted to different OMM-Tech fertilizer application methods: T1 = control (no OMM-Tech); T2 = soil application (120 kg ha{sup -1} of OMM-Tech in a powder form); T3 = leaf application (OMM-Tech in a liquid form with a 5% concentration); T4 = soil + leaf application (60 kg ha{sup -1} of OMM-Tech in powder form + OMM-Tech in liquid form with a 2.5% concentration). The sub-plots received two different water management treatments: irrigated and no irrigated. A drip irrigation system with drippers spaced by 0.50 m was used. We evaluated yield oil of seeds in first production year. Jatropha trees irrigated showed a higher seeds oil yield than no irrigated trees. However, fertilization with OMM-Tech no influenced seed oil yield. Seeds oil yield of Jatropha trees irrigated was 34%, and no irrigated 27%. (author)

Evolutions and Trends in the International Trade with High-Tech Products

Directory of Open Access Journals (Sweden)

Ecaterina Stănculescu

2009-07-01

Full Text Available One of the ways for accessing knowledge and, through it, for competitivity on international level, is the world trade with high-tech (HT products. European Union and its Member States (Romania inclusive position on international HT market defines in fact their competitivity in the global economy. Many politics for encourage innovation in a country lead also to stimulate the technological transfer out of that country. Politics that reduce trade barriers and uncertainties in international trade relations have the potential to increase the international technology transfer. The weight of HT products and services in the entire world trade is around of 19-20%, this percentage varying in different studies and statistics due to the products groups considered to be part of this category and to the inclusion of some adjacent services. During 2001-2008, the world HT export value increased in average by 7% per year. The growth rates were fairly high, by one hand, because of the rising of exported/imported products complexity (and of advanced technologies, and by the other hand, due to the evolution of global demand and offer, that influence the prices of these products. The Popular Republic of China was the country that influenced mostly the increase of international trade with HT products. Four economies – China, United States, EU – 27 and Japan – totalize over one half of the world HT exports. USA and EU registered also the most important commercial deficits in the world in this field until 2008. In 2008, USA deficit turns into commercial surplus in HT area because of the decrease of imports following the crisis. As for Romania, the weight of HT products exports and imports in the whole country’s trade differs from about 4%, in exports case, to about 9-10%, in that of imports. Commercial balance in this field was always in the red. During 2001-2008, the greatest weights in the world trade with HT products have had, in order, the groups

Qualifizierung für "Industrie 4.0". Facharbeit in Deutschland und deutschen Auslandsniederlassungen in Emerging Economies

Science.gov (United States)

Fuchs, Martina; Pilz, Matthias; Wiemann, Judith; Wiemann, Kristina

2017-06-01

Frey and Osbourne's (2013) notion of the end of professional technical skills caused by Industry 4.0 (smart manufacturing), also known as increasing polarisation into "lousy and lovely jobs", is a topical issue. This contribution is a critical review of this idea in the context of German multinational companies, many of which are intensifying their efforts to introduce international customer-oriented quality production, digital high-tech and new human-machine-interfaces. Such high-tech production requires that the companies further internationalise practices of the German technical vocational education and training to emerging economies as Mexico, India and China. For German multinational companies this rather suggests an increase in professional technical skills (also on an international level) and less so rationalisation potentials in this particular segment of production work.

Safe Reentry for False Aneurysm Operations in High-Risk Patients.

Science.gov (United States)

Martinelli, Gian Luca; Cotroneo, Attilio; Caimmi, Philippe Primo; Musica, Gabriele; Barillà, David; Stelian, Edmond; Romano, Angelo; Novelli, Eugenio; Renzi, Luca; Diena, Marco

2017-06-01

In the absence of a standardized safe surgical reentry strategy for high-risk patients with large or anterior postoperative aortic false aneurysm (PAFA), we aimed to describe an effective and safe approach for such patients. We prospectively analyzed patients treated for PAFA between 2006 and 2015. According to the preoperative computed tomography scan examination, patients were divided into two groups according to the anatomy and extension of PAFA: in group A, high-risk PAFA (diameter ≥3 cm) developed in the anterior mediastinum; in group B, low-risk PAFA (diameter <3 cm) was situated posteriorly. For group A, a safe surgical strategy, including continuous cerebral, visceral, and coronary perfusion was adopted before resternotomy; group B patients underwent conventional surgery. We treated 27 patients (safe reentry, n = 13; standard approach, n = 14). Mean age was 60 years (range, 29 to 80); 17 patients were male. Mean interval between the first operation and the last procedure was 4.3 years. Overall 30-day mortality rate was 7.4% (1 patient in each group). No aorta-related mortality was observed at 1 and 5 years in either group. The Kaplan-Meier overall survival estimates at 1 and 5 years were, respectively, 92.3% ± 7.4% and 73.4% ± 13.4% in group A, and 92.9% ± 6.9% and 72.2% ± 13.9% in group B (log rank test, p = 0.830). Freedom from reoperation for recurrent aortic disease was 100% at 1 year and 88% at 5 years. The safe reentry technique with continuous cerebral, visceral, and coronary perfusion for high-risk patients resulted in early and midterm outcomes similar to those observed for low-risk patients undergoing conventional surgery. Copyright © 2017 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Concept of an inherently-safe high temperature gas-cooled reactor

International Nuclear Information System (INIS)

Ohashi, Hirofumi; Sato, Hiroyuki; Tachibana, Yukio; Kunitomi, Kazuhiko; Ogawa, Masuro

2012-01-01

As the challenge to ensure no harmful release of radioactive materials at the accidents by deterministic approach instead to satisfy acceptance criteria or safety goal for risk by probabilistic approach, new concept of advanced reactor, an inherently-safe high temperature gas-cooled reactor, is proposed based on the experience of the operation of the actual High Temperature Gas-cooled Reactor (HTGR) in Japan, High Temperature Engineering Test Reactor (HTTR), and the design of the commercial plant (GTHTR300), utilizing the inherent safety features of the HTGR (i.e., safety features based on physical phenomena). The safety design philosophy of the inherently-safe HTGR for the safety analysis of the radiological consequences is determined as the confinement of radioactive materials is assured by only inherent safety features without engineered safety features, AC power or prompt actions by plant personnel if the design extension conditions occur. Inherent safety features to prevent the loss or degradation of the confinement function are identified. It is proposed not to apply the probabilistic approach for the evaluation of the radiological consequences of the accidents in the safety analysis because no inherent safety features fail for the mitigation of the consequences of the accidents. Consequently, there are no event sequences to harmful release of radioactive materials if the design extension conditions occur in the inherently-safe HTGR concept. The concept and future R and D items for the inherently-safe HTGR are described in this paper.

RESEARCH OF RUSSIAN HIGH TECHNOLOGY MEDICAL EQUIPMENT MARKET: THE SOCIO-ECONOMIC ASPECTS

Directory of Open Access Journals (Sweden)

Станислав Сергеевич Отставнов

2013-04-01

Full Text Available The article presents the data obtained from comprehensive study of russian hi-tech medical equipment market. The size and the structure of Russian medical equipment market in 2005-2011 were investigated and market size forecast for 2012-2015 was given. Priority segments of Russian high-tech medical equipment market were identified (products with a high degree of visualization, anesthetic and ventilation equipment, patient monitors  based on the analysis of literature sources and morbidity structure. Key players in key segments of the market were identified and their financial performance such as number of employees, revenue, net profit, researches and development expenses were compared (according to actual annual reports.Research allowed to draw the following conclusion: today in the key segments of Russian high-tech medical equipment market the leadership of foreign companies  (Hitachi, Philips, Siemens, Toshiba, General Electric, Dräger is indisputable, objective preconditions for the fundamental change of the situation are absent. Import substitution requires the consolidation of domestic producers, adequate funding and human resource.The results can be used in practice by medical industry companies and State authorities on purpose to upgrade the medical industry.DOI: http://dx.doi.org/10.12731/2218-7405-2013-1-31

Safe Management of natural Occurring radionuclides Materials (NORM) from Petroleum Industry in Egypt

International Nuclear Information System (INIS)

El-Hussany, B.S.

2015-01-01

The isolation of radioactive waste from the environment becomes a real problem need to solve in the last half century. Waste management system is created for safe isolation of the waste. Radioactive waste management including all activities, administrative and operational, That are involved in the handling, conditioning, transport, storage and disposal of radioactive wastes. In petroleum and gas industries there are many wastes containing natural occurring radioactive waste (NORM). The concentration of NORM is increased during the different processes. Accumulation of NORM in these areas makes hazard effects on the workers and on the environment. In Egypt, there are many oil and gas industries in different areas of the republic. Most of these exploration sites containing large amounts of NORM waste. The management of this waste is remained unclear for many companies. Some companies have storage designs for the waste. Others are stored the waste on the working site on land without barriers. Additionally final destination of these wastes is not decided. The improper management of this waste lead to hazard effects to workers in the present time and to public in the future. The present work studies the NORM waste management, from petroleum industry, in Egypt. Strategy of NORM is proposed. NORM waste management steps (system) is also proposed, Incineration and deoiling processes for the treatment of NORM waste are compered. Also in this study, human intrusion scenarios were studied for two NORM storage designs, A) above-ground and B) under-ground bunkers

Low-Risk Investing without Industry Bets

DEFF Research Database (Denmark)

Asness, Clifford S.; Frazzini, Andrea; Heje Pedersen, Lasse

2014-01-01

The strategy of buying safe low-beta stocks while shorting (or underweighting) riskier high-beta stocks (“betting against beta”) has been shown to deliver significant risk-adjusted returns. Some have suggested, however, that such “low-risk investing” delivers high returns primarily because...... of industry bets that favor a slowly changing set of stodgy, stable industries. The authors refute this notion by showing that a strategy of betting against beta has delivered positive returns both as an industry-neutral bet within each industry and as a pure bet across industries....

WNA position statement on safe management of nuclear waste and used nuclear fuel

International Nuclear Information System (INIS)

Saint-Pierre, S.

2006-01-01

This World nuclear association (W.N.A.) Position Statement summarizes the worldwide nuclear industry's record, progress and plans in safely managing nuclear waste and used nuclear fuel. The global industry's safe waste management practices cover the entire nuclear fuel-cycle, from the mining of uranium to the long-term disposal of end products from nuclear power reactors. The Statement's aim is to provide, in clear and accurate terms, the nuclear industry's 'story' on a crucially important subject often clouded by misinformation. Inevitably, each country and each company employs a management strategy appropriate to a specific national and technical context. This Position Statement reflects a confident industry consensus that a common dedication to sound practices throughout the nuclear industry worldwide is continuing to enhance an already robust global record of safe management of nuclear waste and used nuclear fuel. This text focuses solely on modern civil programmes of nuclear-electricity generation. It does not deal with the substantial quantities of waste from military or early civil nuclear programmes. These wastes fall into the category of 'legacy activities' and are generally accepted as a responsibility of national governments. The clean-up of wastes resulting from 'legacy activities' should not be confused with the limited volume of end products that are routinely produced and safely managed by today's nuclear energy industry. On the significant subject of 'Decommissioning of Nuclear Facilities', which is integral to modern civil nuclear power programmes, the W.N.A. will offer a separate Position Statement covering the industry's safe management of nuclear waste in this context. The safe management of nuclear waste and used nuclear fuel is a widespread, well-demonstrated reality. This strong safety record reflects a high degree of nuclear industry expertise and of industry responsibility toward the well-being of current and future generations

Rare earth industries: Strategies for Malaysia

International Nuclear Information System (INIS)

2011-01-01

Evidently, many reports cite Malaysia as having reasonably substantial amounts of rare earths elements. In fact, based on the rare earths found in the residual tin deposits alone, Malaysia has about 30,000 tonnes. This does not take into account unmapped deposits which experts believe may offer more tonnages of rare earths. Brazil which is reported to have about 48,000 tonnes has announced plans to invest aggressively in the rare earths business. China has on record the largest reserves with about 36 million tonnes. This explains why China has invested heavily in the entire value chain of the rare earths business. Chinas committed investment in rare earths started many years ago when the country's foremost leaders proclaimed the strategic position of rare earths in the world economy. That forecast is now a reality where the rise in the green high-tech economy is seen driving global demand for rare earths in a big way. Malaysia needs to discover and venture into new economic growth areas. This will help fuel the country's drive to achieve a high income status by 2020 as articulated in the New Economic Model (NEM) and the many supporting Economic Transformation Plans that the Government has recently launched. Rare earths may be the new growth area for Malaysia. However, the business opportunities should not just be confined to the mining, extraction and production of rare earths elements alone if Malaysia is to maximise benefits from this industry. The industry's gold mine is in the downstream products. This is also the sector that China wants to expand. Japan which now controls about 50 % of the global market for downstream rare earths-based high-tech components is desperately looking for partners to grow their stake in the business. Malaysia needs to embark on the right strategies in order to build the rare earths industry in the country. What are the strategies? (author)

High-flow, low-head pumps provide safe passage for Pacific salmon

International Nuclear Information System (INIS)

Anon

2004-01-01

The installation of 29 ultra-low head, high capacity submersible pump and auxiliary equipment at the Rocky Reach Dam in Washington State to allow juvenile salmon safe passage on their journey down the Columbia River to the Pacific Ocean is described. The reputed cost of the project is US$160 million; its purpose is to get juvenile salmon safely around the Rocky Reach Dam without interfering with the dam's original mission of generating electric power. The project is the most expensive fish bypass on any Columbia River dam. Getting the salmon safely around the dam is intended to reduce the impact of hydroelectric power projects on the basin's salmon stocks which are now estimated at less than 10 per cent of their historic size, despite major hatchery programs. The Columbia River has the second largest volume flow of any river in the United States, and millions of people depend on it for employment in water-related industries, and for transportation. The new horizontally installed propeller pump was developed by ITT Flygt; it utilizes planetary gear reduced to match the motor speed with the propeller rpm. Each 90 kW propeller pump has a flow rate of seven cubic meters per second at a head of 0.55 metres. The auxiliary equipment includes 10 racks of flap gates to prevent reverse flow, electric controls, remote supervision, testing, installation and maintenance facilities. It is anticipated that the new bypass will allow the Chelan County Public Utility Department, owners of the facility, to phase out all current spills, except for a 16 per cent spill for 40 days each spring for Sockeye salmon which tend to travel too deep to use the bypass. Prior to installation of this new facility, 60 to 70 per cent of average daily flow in the spring and summer had to be sacrificed to accommodate all species of salmon and steelhead, with corresponding losses of power generating capacity

Keeping Sealed Radioactive Sources Safe and Secure

International Nuclear Information System (INIS)

Potterton, Louise

2013-01-01

Radioactive sources are used in a wide variety of devices in medical, industrial, agricultural and research facilities worldwide. These sources, such as cobalt-60 and caesium-137, emit high levels of ionizing radiation, which can treat cancer, measure materials used in industry and sterilize food and medical appliances. Problems may arise when these sources are no longer needed, or if they are damaged or decayed. If these sources are not properly stored they can be a threat to human health and the environment and pose a security risk. Procedures to secure these spent or 'disused' sources are often highly expensive and need specialized assistance. The IAEA helps its States find long term solutions for the safe and secure storage of disused sealed radioactive sources (DSRSs)

[Present status and sustainable development of Dendrobium officinale industry].

Science.gov (United States)

Wu, Yunqin; Si, Jinping

2010-08-01

To understand the present status and characteristics of Dendrobium officinale industry and to provide a rationale for the sustainable industrial development. Based on references and an on-site investigation of main Dendrobium officinale-producing enterprises and market, to analyze main existing problems and to propose suggestions for sustainable development. More than 10 provinces and regions are involved in the production around the center of Zhejiang and Yunnan provinces. These two provinces are different from each other in development pattern. Yunnan adopts a mode of companies minus farmer households but Zhejiang mainly employs a mode that a leading company establishes a production base with production, processing and marketing combined together. Zhejiang mode is characterized by high tech, high investment, high risk and high return. Existence of non-genuine species, stagnancy in development and application of varieties and techniques for quality control and a narrow channel for marketing are the key problems limiting sustainable development of the industry. The key to sustainable development of the industry is to establish a technological alliance to speed up development of common techniques and application of integrated innovations, to strengthen self-discipline and monitoring of production, and to expand sales market.

"Low -Technology”: A Forgotten Sector in Innovation Policy

Directory of Open Access Journals (Sweden)

Hartmut Hirsch-Kreinsen

2008-09-01

Full Text Available Abstract In the discussions on research and technology policy focuses mainly on the dynamic innovation of new technologies. Long term growth, competitive advantages on the world market and employment effects are primarily perceived in new high-tech products. According to this perspective the question as to the future of industrial sectors that produce mature and conventional standard products is not raised at all. Such industrial sectors are, following well-known OECD categories, regarded as "low-tech". However, there are a number of convincing examples of sectors and companies that have been successfully inno-vating low tech products in “high-tech countries” of the European Union.The paper focuses on low-tech companies analysing their innovative capabilities and developmental perspectives. The argumentation is based on results of a recently finished research project on the developmental perspectives of low-tech industries funded by the European Commission (project title: „Policy and Innovation in Low-tech Indus-tries in Europe – PILOT“.

The Debreather and NuTech: A Reply to Kleespies

Science.gov (United States)

Ogden, Russel D.

2010-01-01

This article responds to Phillip Kleespies's (2010/this issue) commentary on NuTech fieldworkers and their use of the debreather. Non-medical assistance with suicide raises legitimate concerns about accountability, public safety, and care for those who are suffering. Given that suicide is not a crime, an outcome of the NuTech movement may be that…

The Effectiveness of the High-Tech Speech-Generating Device with Proloquo2Go App in Reducing Echolalia Utterances in a Student with Autism

Science.gov (United States)

Alrusayni, Norah

2017-01-01

This study was conducted to determine the effectiveness of using the high-tech speech-generating device with Proloquo2Go app to reduce echolalic utterances in a student with autism during conversational speech. After observing that the iPad device with several apps was used by the students and that it served as a communication device, language…

Performance of electrodialysis reversal and reverse osmosis for reclaiming wastewater from high-tech industrial parks in Taiwan: A pilot-scale study.

Science.gov (United States)

Yen, Feng-Chi; You, Sheng-Jie; Chang, Tien-Chin

2017-02-01

Wastewater reclamation is considered an absolute necessity in Taiwan, as numerous industrial parks experience water shortage. However, the water quality of secondary treated effluents from sewage treatment plants generally does not meet the requirements of industrial water use because of the high inorganic constituents. This paper reports experimental data from a pilot-plant study of two treatment processes-(i) fiber filtration (FF)-ultrafiltration (UF)-reverse osmosis (RO) and (ii) sand filtration (SF)-electrodialysis reversal (EDR)-for treating industrial high conductivity effluents from the Xianxi wastewater treatment plant in Taiwan. The results demonstrated that FF-UF was excellent for turbidity removal and it was a suitable pretreatment process for RO. The influence of two membrane materials on the operating characteristics and process stability of the UF process was determined. The treatment performance of FF-UF-RO was higher than that of SF-EDR with an average desalination rate of 97%, a permeate conductivity of 272.7 ± 32.0, turbidity of 0.183 ± 0.02 NTU and a chemical oxigen demand of <4.5 mg/L. The cost analysis for both processes in a water reclamation plant of 4000 m 3 /d capacity revealed that using FF-UF-RO had a lower treatment cost than using SF-EDR, which required activated carbon filtration as a post treatment process. On the basis of the results in this study, the FF-UF-RO system is recommended as a potential process for additional applications. Copyright © 2016 Elsevier Ltd. All rights reserved.

77 FR 26588 - In the Matter of Recycle Tech, Inc.; Order of Suspension of Trading

Science.gov (United States)

2012-05-04

... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] In the Matter of Recycle Tech, Inc.; Order of... of current and accurate information concerning the securities of Recycle Tech, Inc. (``Recycle Tech... protection of investors require a suspension of trading in the securities of Recycle Tech. Therefore, it is...

Development status of PIUS/ISER - a inherently safe reactor for the international use

International Nuclear Information System (INIS)

Wakabayashi, Hiroaki

1987-01-01

It is just in early 1980s that LWR-based nuclear power has become a substantial power source. Though the safety level of nuclear power is always claimed to be sufficiently high by the industry, it rests on the idea of defense in depth, the calculation by probabilistic risk assessment (PRA) or probabilistic safety assessment (PSA). The TMI-2 and Chernobyl-4 accidents occurred in the industrially most advanced countries. In this paper, an alternative way to safe nuclear power is sought in so-called inherently safe reactors (ISR) including the LWR type PIUS/ISER. With proper consideration into the design of nuclear reactor plants, those can be made basically safe through the use of passive safe mechanism for their design. In short, an ISR is a nuclear power reactor which has passive and intrinsic core cooling capability and automatic shutdown capability. As the nuclear power reactors which are currently claimed to be inherently safe, there are the process inherent and ultimately safe reactor (PIUS) of ASEA-ATOM Sweden and the inherently safe and economical reactor (ISER) of the University of Tokyo, Japan, of LWR type. The current status of the development, the reliability, and some technical problems of ISER/PIUS and the attitude of various countries toward ISER/PIUS are described. (Kako, I.)

Progress in high energy physics and nuclear safety : Proceedings of the NATO Advanced Research Workshop on Safe Nuclear Energy

CERN Document Server

Polański, Aleksander; Begun, Viktor

2009-01-01

The book contains recent results on the progress in high-energy physics, accelerator, detection and nuclear technologies, as well as nuclear safety in high-energy experimentation and in nuclear industry, covered by leading experts in the field. The forthcoming experiments at the Large Hadron Collider (LHC) at CERN and cosmic-ray experiments are highlighted. Most of the current high-energy experiments and their physical motivation are analyzed. Various nuclear energy safety aspects, including progress in the production of new radiation-resistant materials, new and safe nuclear reactor designs, such as the slowly-burning reactor, as well as the use of coal-nuclear symbiotic methods of energy production can be found in the book.

Development and application of industrial radioisotope instruments in China

International Nuclear Information System (INIS)

Lu Yanxiao

1994-09-01

Industrial radioisotope instruments are emerging as advanced monitoring, controlling and automation tools for industries in China. Especially the on-line analysis systems based on radioisotope instruments, referred to as nucleonic control systems (NCS), have more and more important role in the modernization and optimization of industrial processes. Over nearly four decades significant progress has been made in the development and application of radioisotope instruments in China. After a brief review of the history of radioisotope instruments, the state of the art of this kind of instruments and recent examples of their applications are given. Technical and economic benefits have resulted from the industrial applications of radioisotope instruments and the sales of products of their own in marketing. It is expected that along with the high speed growth of national economy, there will be greater demand for radioisotope instruments and nucleonic control systems in Chinese industry to promote the technological transformation and progress of traditional industries and to establish high-tech industries with technology-intensive products. Sustained efforts for the research and development of radioisotope instrument should be made to up-grade domestic instruments and to satisfy the needs of the smaller scale industries more common in China for low cost systems. (1 fig., 2 tabs.)

Baza danych BazTech – integracja i poszerzanie dostępu

OpenAIRE

Derfert-Wolf, Lidia; Buzdygan, Dorota

2014-01-01

The BazTech database – integration and widening access. The BazTech base enables the access to scientific publications in Polish journals in the field of technical sciences, and as one of the resources of open science is available at the Virtual Library of Science. The paper presents the current state of BazTech as an introduction to the review of the development of the base in the direction of integration with other resources. Integration – apart from multibrowsers (eg PRIMO), data aggregato...

Two Different Maintenance Strategies in the Hospital Environment: Preventive Maintenance for Older Technology Devices and Predictive Maintenance for Newer High-Tech Devices

OpenAIRE

Sezdi, Mana

2016-01-01

A maintenance program generated through the consideration of characteristics and failures of medical equipment is an important component of technology management. However, older technology devices and newer high-tech devices cannot be efficiently managed using the same strategies because of their different characteristics. This study aimed to generate a maintenance program comprising two different strategies to increase the efficiency of device management: preventive maintenance for older tec...

Safe Human-Robot Cooperation in an Industrial Environment

Directory of Open Access Journals (Sweden)

Nicola Pedrocchi

2013-01-01

Full Text Available The standard EN ISO10218 is fostering the implementation of hybrid production systems, i.e., production systems characterized by a close relationship among human operators and robots in cooperative tasks. Human-robot hybrid systems could have a big economic benefit in small and medium sized production, even if this new paradigm introduces mandatory, challenging safety aspects. Among various requirements for collaborative workspaces, safety-assurance involves two different application layers; the algorithms enabling safe space-sharing between humans and robots and the enabling technologies allowing acquisition data from sensor fusion and environmental data analysing. This paper addresses both the problems: a collision avoidance strategy allowing on-line re-planning of robot motion and a safe network of unsafe devices as a suggested infrastructure for functional safety achievement.

Radiation curing technology progress and its industrial applications in Japan

International Nuclear Information System (INIS)

Ukachi, Takashi

2003-01-01

Optics, electronics and display industries are now the driving forces for the Japanese radiation curing technology. The purpose of this paper is to overview the newly developed radiation curing technology in Japan, in particular, its industrial applications, and to present the market figures in radiation curing applications, which were surveyed by RadTech Japan in 2002 afresh. (author)

Characterization of cyclical phases in the manufacturing industry in Spain

Directory of Open Access Journals (Sweden)

Mercè Sala

2014-09-01

Full Text Available 120 Purpose: The purpose of this paper is to characterize the cyclical phases of the manufacturing industry in Spain and detect which industries have more influence on the Spanish business cycle. We assume that economic growth is a priority; we are going to determine which industries have a more/less appropriate cyclical behavior according this priority. We analyze if the industries with better cyclical behavior are the ones that achieve greater co-movement with the business cycle of the Spanish economy, as this means they have a positive influence on economic activity. Design/methodology/approach: We examine the disaggregated quarterly IPI data of 16 manufacturing industries. Our methodology follows three steps. Firstly, we define cycle turning points; we follow the Harding and Pagan (2002 methodology. Secondly, we characterize the cyclical phases of the manufacturing industries in terms of duration, amplitude, deepness and steepness. We also determine the degree of inter-industrial cyclical synchronization and between industries in the cycle of the Spanish economy. This analysis is performed in two ways. On the one hand, we use the concordance index and the correlation coefficient. On the other hand, we work with indicators based on a consistency table. In the Third step, we apply a multi-objective methodology, specifically the compromise programming, to determine which industries have a more/less appropriate cyclical behavior according to the growth priority. Findings and Originality/value: The business cycle of the Spanish economy is positively influenced by high- and medium-tech industries, which have demonstrated their competitive capacity in international markets, and by medium- low-tech industries, with major strengths in R&D, and in survival and consolidation strategies. These results enable manufacturing industries to exert a positive effect on the business cycle that is weakened because many of them show a high correlation between

Safe Grid

Science.gov (United States)

Chow, Edward T.; Stewart, Helen; Korsmeyer, David (Technical Monitor)

2003-01-01

The biggest users of GRID technologies came from the science and technology communities. These consist of government, industry and academia (national and international). The NASA GRID is moving into a higher technology readiness level (TRL) today; and as a joint effort among these leaders within government, academia, and industry, the NASA GRID plans to extend availability to enable scientists and engineers across these geographical boundaries collaborate to solve important problems facing the world in the 21 st century. In order to enable NASA programs and missions to use IPG resources for program and mission design, the IPG capabilities needs to be accessible from inside the NASA center networks. However, because different NASA centers maintain different security domains, the GRID penetration across different firewalls is a concern for center security people. This is the reason why some IPG resources are been separated from the NASA center network. Also, because of the center network security and ITAR concerns, the NASA IPG resource owner may not have full control over who can access remotely from outside the NASA center. In order to obtain organizational approval for secured remote access, the IPG infrastructure needs to be adapted to work with the NASA business process. Improvements need to be made before the IPG can be used for NASA program and mission development. The Secured Advanced Federated Environment (SAFE) technology is designed to provide federated security across NASA center and NASA partner's security domains. Instead of one giant center firewall which can be difficult to modify for different GRID applications, the SAFE "micro security domain" provide large number of professionally managed "micro firewalls" that can allow NASA centers to accept remote IPG access without the worry of damaging other center resources. The SAFE policy-driven capability-based federated security mechanism can enable joint organizational and resource owner approved remote

Virginia Tech honors women in March

OpenAIRE

Lazenby, Jenna

2007-01-01

Commemorating National Women's History Month in March, the Virginia Tech community will host a variety of informative, educational, and entertaining events and programs that highlight women's diverse experiences and achievements.

NASA Tech Briefs, January 2009

Science.gov (United States)

2009-01-01

Tech Briefs are short announcements of innovations originating from research and development activities of the National Aeronautics and Space Administration. They emphasize information considered likely to be transferable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. Topics covered include: The Radio Frequency Health Node Wireless Sensor System; Effects of Temperature on Polymer/Carbon Chemical Sensors; Small CO2 Sensors Operate at Lower Temperature; Tele-Supervised Adaptive Ocean Sensor Fleet; Synthesis of Submillimeter Radiation for Spectroscopy; 100-GHz Phase Switch/Mixer Containing a Slot-Line Transition; Generating Ka-Band Signals Using an X-Band Vector Modulator; SiC Optically Modulated Field-Effect Transistor; Submillimeter-Wave Amplifier Module with Integrated Waveguide Transitions; Metrology System for a Large, Somewhat Flexible Telescope; Economical Implementation of a Filter Engine in an FPGA; Improved Joining of Metal Components to Composite Structures; Machined Titanium Heat-Pipe Wick Structure; Gadolinia-Doped Ceria Cathodes for Electrolysis of CO2; Utilizing Ocean Thermal Energy in a Submarine Robot; Fuel-Cell Power Systems Incorporating Mg-Based H2 Generators; Alternative OTEC Scheme for a Submarine Robot; Sensitive, Rapid Detection of Bacterial Spores; Adenosine Monophosphate-Based Detection of Bacterial Spores; Silicon Microleaks for Inlets of Mass Spectrometers; CGH Figure Testing of Aspherical Mirrors in Cold Vacuums; Series-Coupled Pairs of Silica Microresonators; Precise Stabilization of the Optical Frequency of WGMRs; Formation Flying of Components of a Large Space Telescope; Laser Metrology Heterodyne Phase-Locked Loop; Spatial Modulation Improves Performance in CTIS; High-Performance Algorithm for Solving the Diagnosis Problem; Truncation Depth Rule-of-Thumb for Convolutional Codes; Efficient Method for Optimizing Placement of Sensors.

Inherently safe high temperature gas-cooled reactor

International Nuclear Information System (INIS)

Yamada, Masao; Hayakawa, Hitoshi

1987-01-01

It is recognized in general that High Temperature Gas-cooled Reactors have remarkable characteristics in inherent safety and it is well known that credits of the time margin have been admitted for accident evaluation in the licensing of the currently operating prototype HTGRs (300 MWe class). Recently, more inherently safe HTGRs are being developed in various countries and drawing attention on their possibility for urban siting. The inherent safety characteristics of these HTRs differ each other depending on their design philosophy and on the features of the components/structures which constitute the plant. At first, the specific features/characteristics of the elemental components/structures of the HTRs are explained one by one and then the overall safety features/characteristics of these HTR plants are explained in connection with their design philosophy and combination of the elemental features. Taking the KWU/Interatom Modular Reactor System as an example, the particular design philosophy and safety characteristics of the inherently safe HTR are explained with a result of preliminary evaluation on the possibility of siting close to densely populated area. (author)

Virginia Tech Wildlife Student Studies Cheetah Home Ranges

OpenAIRE

Davis, Lynn

2003-01-01

The cheetah may be the world's fastest land animal, accelerating to high speeds in just a few steps, but within recent years the cheetahs of South Africa are battling the race for survival. To find remedies for this problem Peter Laver, a graduate student in fisheries and wildlife sciences in the College of Natural Resources at Virginia Tech, is expanding current research on home ranges of the cheetah population located in the Serengeti National Park in Tanzania, Africa.

Impact of gender and personality traits (BFI-10) on tech savviness

DEFF Research Database (Denmark)

Pavlicek, Antonin; Sudzina, Frantisek; Malinova, Ludmila

2017-01-01

Nowadays, it is necessary to use technology in various everyday activities. A certain level of what used to be called high-tech savviness is needed to access almost all modern services. The aim of this paper is to analyze if gender and personality traits (Big Five Inventory-10) influence self...

High-Technology Companies Often Turn to Colleges for Confidential 'Beta Tests' of New Products.

Science.gov (United States)

Turner, Judith Axler

1988-01-01

Beta testing--the process of trying a product in a real-world setting before releasing it commercially--exploits a natural interface between universities and high-technology industries. High-tech companies need confidential, real-world tests of new products, and universities are eager to get an early look at tomorrow's technology. (MLW)

香港金融科技的未来%La future de FinTech à Hong Kong

Institute of Scientific and Technical Information of China (English)

香港金融发展局; 杨鑫

2017-01-01

FinTech - l'innovation financiére grace à la technologie - a le potentiel d'apporter des améliorations substantielles de la productivité et de la qualité des services financiers à Hong Kong. Hong Kong, avec son grand secteur financier, est en mesure de gagner de la tendance FinTech et de perdre à d'autres centres si cela ne fonctionne pas. Ce rapport propose une stratégie FinTech comprenant cinq programmes FinTech - Cyber sécurité, paiement et réglement de titre un identifiant numérique et KYC, WealthTech, InsurTech et RegTech - pris en charge par un bureau FinTech par lequel le territoire peut être avancé de maniére décisive.

30 CFR 75.803 - Fail safe ground check circuits on high-voltage resistance grounded systems.

Science.gov (United States)

2010-07-01

... High-Voltage Distribution § 75.803 Fail safe ground check circuits on high-voltage resistance grounded systems. [Statutory Provisions] On and after September 30, 1970, high-voltage, resistance grounded systems... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Fail safe ground check circuits on high-voltage...

An Innovative High-Tech Acupuncture Product: SXDZ-100 Nerve Muscle Stimulator, Its Theoretical Basis, Design, and Application

Directory of Open Access Journals (Sweden)

Xinyan Gao

2012-01-01

Full Text Available We introduce the theoretical basis, design, and application of a patented innovative high-tech product, SXDZ-100 nerve and muscle stimulator. This product is featured with a built-in chip containing transcoding information from different acupuncture manipulation collected from the wide dynamic neurons (WDR in the spinal dorsal horn in animal experiments, which is bioinformation feedback therapy. The discharges of WDR neurons excited by different manipulations are analyzed using chaos theory in this study. It combines the advantages of manual acupuncture (MA like no receptor adaptation and treatment individualization and that of electroacupuncture (EA such as relatively low stimulation intensity and good quantification and thus makes it more effective than common stimulators in acupuncture clinic.

Measuring innovation in a 'low-tech' service industry: the case of the Dutch hospitality industry

NARCIS (Netherlands)

den Hertog, P.; Gallouj, F.; Segers, J.

2011-01-01

This article presents the findings of a survey among 613 firms in the Dutch hospitality industry adopting a demarcation perspective. The paper illustrates that innovation in this service industry is much higher and more varied than regularly reported. It further indicates that innovation activities

Safe or sorry: Feds criminalize safety breaches, while industry record improves with time

Energy Technology Data Exchange (ETDEWEB)

Collison, M.

2004-05-01

An overview of safety conditions in Canada's oilpatch is provided, inclusive of a review of historical developments of safety practices by the industry itself, and evolving safety legislation by the provincial and federal governments. The general picture that emerges is that while great strides have been made in legislation, training and safety practices, incidents still occur; employees are still injured and sometimes die. In 2003, for example, there were almost 156,000 work-related injuries reported; of these more than 39,000 were serious enough for the worker to miss work beyond the day of the accident. Nearly 52,000 of the injured workers were inexperienced. There were 127 workplace fatalities; of these eight workers were under the age of 25. Vehicle collisions were the source of the greatest number of accidents; 25 per cent of all work-related deaths were due to traffic trauma. The oil and gas industry spawns an incredible range of hazards; everything from bear maulings and badger holes to sour gas leaks, people falling or equipment falling on them, or workers getting caught in moving equipment parts. The federal and provincial governments are major actors in the field of occupational safety, while the industry provides industry-recommended practices through the Petroleum Safety Council. The Council has also developed a basic safety awareness training package to provide smaller companies with effective training tools, and special programs targeted to the needs of new workers and international employees, in an effort to bridge differences in cultural attitudes towards the work environment. English language competence of newcomers to Canada is an area of special concern to the industry, along with a wide variety of safety training programs run by the Petroleum Industry Training Service. The Work Safe Alberta Information Sharing Network (www.worksafely.org) is another useful tool in gaining access to safety consultants, safety e-tools, and safety related

The Computer Industry. High Technology Industries: Profiles and Outlooks.

Science.gov (United States)

International Trade Administration (DOC), Washington, DC.

A series of meetings was held to assess future problems in United States high technology, particularly in the fields of robotics, computers, semiconductors, and telecommunications. This report, which focuses on the computer industry, includes a profile of this industry and the papers presented by industry speakers during the meetings. The profile…

Competition Law and High-Tech Markets : Conventional Antitrust Thinking Revisited?

NARCIS (Netherlands)

Ilan, Y.

2007-01-01

Knowledge-based industries, often labelled 'high-technology' or 'new economy' have grown in economic significance over the past few decades and have dramatically changed our living standards. These markets typically possess a range of common characteristics, most notably globalisation of businesses,

World Nuclear Association position statement: Safe management of nuclear waste and used nuclear fuel

International Nuclear Information System (INIS)

Saint-Pierre, Sylvain

2006-01-01

This WNA Position Statement summarises the worldwide nuclear industry's record, progress and plans in safely managing nuclear waste and used nuclear fuel. The global industry's safe waste management practices cover the entire nuclear fuel-cycle, from the mining of uranium to the long-term disposal of end products from nuclear power reactors. The Statement's aim is to provide, in clear and accurate terms, the nuclear industry's 'story' on a crucially important subject often clouded by misinformation. Inevitably, each country and each company employs a management strategy appropriate to a specific national and technical context. This Position Statement reflects a confident industry consensus that a common dedication to sound practices throughout the nuclear industry worldwide is continuing to enhance an already robust global record of safe management of nuclear waste and used nuclear fuel. This text focuses solely on modern civil programmes of nuclear-electricity generation. It does not deal with the substantial quantities of waste from military or early civil nuclear programmes. These wastes fall into the category of 'legacy activities' and are generally accepted as a responsibility of national governments. The clean-up of wastes resulting from 'legacy activities' should not be confused with the limited volume of end products that are routinely produced and safely managed by today's nuclear energy industry. On the significant subject of 'Decommissioning of Nuclear Facilities', which is integral to modern civil nuclear power programmes, the WNA will offer a separate Position Statement covering the industry's safe management of nuclear waste in this context. The paper's conclusion is that the safe management of nuclear waste and used nuclear fuel is a widespread, well-demonstrated reality. This strong safety record reflects a high degree of nuclear industry expertise and of industry responsibility toward the well-being of current and future generations. Accumulating

Measurements of some basic constants of 68Ga(BAT-TECH) as an imaging agent

International Nuclear Information System (INIS)

Chen Huawei; Liu Boli

1994-01-01

The kinetic properties of a new myocardial imaging agent 68 Ga(BAT-TECH) are investigated and its thermodynamic constants are measured. The results are as follows: Citrate→BAT-TECH exchange reaction order is second-order; reaction rate k = 0.50 l/mol·s; activation energy E a = 56.6 kJ/mol; the stability constant of 68 Ga(BAT-TECH) lgβ = 14.9; the acid dissociation constants of BAT-TECH pK 1 = 4.62, pK 2 = 7.68, pK-3 = 8.68, pK 4 = 11.2

Virginia Tech's K-9 unit to receive Kevlar vest from alumni organization

OpenAIRE

Dickerson, Susan

2004-01-01

Hokie, the Virginia Tech Police Department's German shepherd, will be presented with a custom-fitted Virginia Tech Kevlar bulletproof vest to protect him from all the dangers he faces while performing his daily duties.

High energy eye-safe and mid-infrared optical parametric oscillator

International Nuclear Information System (INIS)

Liu, J; Liu, Q; Huang, L; Gong, M

2010-01-01

A high energy eye-safe and mid-infrared optical parametric oscillator (OPO) is demonstrated. The nonlinear media is a Y-cut KTA crystal with the length of 20 mm, which is pumped by a Nd:YAG laser. Both eye-safe and mid-infrared laser are output with high energy. When the pump energy is 1 J and the pulse duration is 10 ns, we get 53 mJ idler at 3.632 μm and 151 mJ signal at 1.505 μm. As we know, the idler energy is the highest at the wavelength beyond 3.5 μm and the signal energy is the highest with Y-cut KTA. The results prove that the Y-cut KTA crystal can produce the signal and idler with the energies as high as these in the paper. We have tested the temperature-tuning characters and the coefficient of the idler is 0.26 nm/°C

Design of efficient and safe sanitary installations; Ontwerpen van zuinige en veilige sanitaire installaties

Energy Technology Data Exchange (ETDEWEB)

Scheffer, W.; Pieterse-Quirijns, I.; Van Bergen, R.; Van Bruggen, M.; Nuijten, O.; Van der Lugt, W.; Wilschut, M.; Van Oostwaard, T.; Van Rijn, B.; Leiting, E.

2012-12-15

In this issue of ThemaTech several aspects regarding the title topic are discussed in 9 articles: hygienic and efficient design of main water supply systems, the scope of sustainable design and installation, calculation rules for the design of main water supply systems, prevention of Legionella in tap water, new calculation rules in comparison with the q{open_square}n method, energy efficient and safe thermal disinfection, urine as a source of useful materials, advise on legionella prevention for public water systems, saving cost with legionella prevention in the building process [Dutch] In deze aflevering van ThemaTech worden diverse aspecten m.b.t. het titel onderwerp behandeld in 9 artikelen: beter hygienisch en zuinig ontwerp van leidingwaterinstallaties, de reikwijdte van duurzaam ontwerpen en installeren, rekenregels voor het ontwerp van leidingwaterinstallaties, legionellapreventie in leidingwater, nieuwe rekenregels in vergelijking met de q{open_square}n method, energiezuinige en veilige thermische desinfectie, urine als bron van grondstoffen, advisering over legionella preventie voor collectieve leidingwaterinstallaties, kostenbesparing van legionellapreventie in het bouwproces.

R&D ADMINISTRATION IN THE HIGH TECHNOLOGY INDUSTRY: HOW TO MANAGE A PARADOX

Directory of Open Access Journals (Sweden)

Nobuiuki Costa Ito

2010-10-01

Full Text Available The competitive environment of the knowledge age is getting more complex, dynamic, and fast-moving each day. The high tech industry is intensively tied to its effects and demands for innovation, so the field of Research and Development must act strategically, generating innovations and granting success and sustainability to the business. However, there is a paradox in R&D which may lay traps and obstacles disguised by the busy day-to-day activity of the organization. The purpose of this paper is to point out directions that managers may take to cope with these contradictions in R&D administration. The R&D paradox is rooted in the conflict between exploitation, achieved by continual improvement through incremental innovation, and by exploration, which seeks new opportunities in the creation of new technologies through disruptive innovations. These two sides of the paradox demand different, and sometimes even divergent, organizations. Top management leadership is crucial for the acceptance and balancing of the contradictions created by this paradox, and can align exploitation/exploration through distributive and integrative decisions and transform companies into truly ambidextrous organizations.    Key-words:  Research & Development. Innovation. Paradox. Ambidextrous organizations. Strategy. 

Empreendedorismo high-tech no Brasil: condicionantes econômicos, políticos e culturais

Directory of Open Access Journals (Sweden)

Sonia M. K. Guimarães

2010-04-01

Full Text Available O artigo aborda o fenômeno do empreendedorismo tecnológico, em crescimento no Brasil, estimulado sobretudo pelo avanço das tecnologias de informação e comunicação e por ações governamentais como a Política de Desenvolvimento Produtivo, de maio de 2008, que propõe aumento de 10% no número de micro e pequenas exportadoras, até 2010. O estudo baseia-se em uma abordagem multidimensional que destaca a importância de aspectos econômicos, institucionais, culturais e cognitivos e que supõe uma articulação entre fatores objetivos e subjetivos, entre níveis micro e macro. Os dados empíricos foram coletados através de entrevistas realizadas com empreendedores cujas empresas encontram-se em incubadoras tecnológicas, localizadas em três campi de universidades, no estado do Rio Grande do Sul. As evidências encontradas reforçam a hipótese de que estaria ocorrendo o que se poderia chamar de "mudança cultural", no sentido de que profissionais com alta qualificação, demandados pelo mercado de trabalho, apresentam comportamentos, valores e objetivos, distintos dos esperados - obter um emprego bem remunerado em uma grande empresa, pública ou privada; ênfase nos valores econômicos; individualismo; exercício de poder.The article is concerned with discussing high tech entrepreneurship, which has grown in Brazil, fostered by the advancement of the information and communication technologies and by government actions, as illustrated by the Productive Development Policy, from May, 2008, which sets a target of 10 percent growth, for exporting micro and small enterprises, until 2010. The study was based on a multi-dimensional approach underlying the importance of the economic, institutional, cultural and cognitive factors and the interrelationship between the objective and subjective, the macro and micro levels. The empirical data were obtained through interviews with entrepreneurs whose firms are part of technological incubators, located

High output stomas: ensuring safe discharge from hospital to home.

Science.gov (United States)

Smith, Lisa

High-output stomas are a challenge for the patient and all health professionals involved. This article discusses safe discharge home for this patient group, encouraging collaborative working practices between acute care trust and the community services. The authors also discuss the management of a high-output stoma and preparation and education of the patient before discharge home.

Study of industry safety management

International Nuclear Information System (INIS)

Park, Pil Su

1987-06-01

This book deals with general remarks, industrial accidents, statistics of industrial accidents, unsafe actions, making machinery and facilities safe, safe activities, having working environment safe, survey of industrial accidents and analysis of causes, system of safety management and operations, safety management planning, safety education, human engineering such as human-machines system, system safety, and costs of disaster losses. It lastly adds individual protective equipment and working clothes including protect equipment for eyes, face, hands, arms and feet.

Germany, high-tech country

International Nuclear Information System (INIS)

Anon.

1997-01-01

The Nuclear Technology Conference organized annually by the Deutsches Atomforum (DAtF) e.V. and the Kerntechnische Gesellschaft (KTG) e.V. was held in Aachen on May 13-15, 1997. Approximately 1000 participants from seventeen countries met to exchange information with experts from industry, research, science, and politics. Unlike earlier events, this one was not disturbed by demonstrations. DAtF President Dr. Wilfried Steuer welcomed Joachim H. Witt, Chief Executive Officer of the city of Aachen, who expressed words of welcome on behalf of his city at the opening of the plenary day of the conference. Energy policy and global competition were the optics of the address by Dr. Norbert Lammert, Parliamentary Undersecretary of State with the German Federal Ministry of Economics. He advocated grasping the changes offered by expanding global markets by reforming the structures of the energy supply sector. The rank of nuclear power in European research policy was explained by Fabricio Caccia Dominioni as representative of the European Commission. The electricity utilities were represented by Dr. Dietmar Kuhnt, Chief Executive Officer of RWE AG, who spoke about the security of energy investments. A thoughtful analysis of Germany as an industrial location was presented by Professor Dr. Herbert Henzler of McKinsey and Company Inc. The President of the European Nuclear Society (ENS), Ger R. Kuepers, sketched the development of nuclear power in the Netherlands, combining national and European aspects and emphasizing, in particular, the important function of ENS. Uranium enrichment as an European project was subject of the report by Dr. Klaus Messer, Urenco Ltd. The General Manager of Tractabel Energy Engineering and Chairman of Belgatom, Guy Frederic, examined the economic viability of nuclear power, appealing to the audience to reduce capital costs by innovation without detracting from safety. (orig./DG) [de

Second public meeting of Governor Kaine's Independent Virginia Tech Incident Review Panel

OpenAIRE

Owczarski, Mark

2007-01-01

The second public meeting of Governor Kaine's Independent Virginia Tech Incident Review Panel will convene on Monday, May 21, at The Inn at Virginia Tech and Skelton Conference Center Latham Ballroom, 901 Prices Fork Road in Blacksburg.

Implementation of Safe-by-Design for Nanomaterial Development and Safe Innovation: Why We Need a Comprehensive Approach.

Science.gov (United States)

Kraegeloh, Annette; Suarez-Merino, Blanca; Sluijters, Teun; Micheletti, Christian

2018-04-14

Manufactured nanomaterials (MNMs) are regarded as key components of innovations in various fields with high potential impact (e.g., energy generation and storage, electronics, photonics, diagnostics, theranostics, or drug delivery agents). Widespread use of MNMs raises concerns about their safety for humans and the environment, possibly limiting the impact of the nanotechnology-based innovation. The development of safe MNMs and nanoproducts has to result in a safe as well as functional material or product. Its safe use, and disposal at the end of its life cycle must be taken into account too. However, not all MNMs are similarly useful for all applications, some might bear a higher hazard potential than others, and use scenarios could lead to different exposure probabilities. To improve both safety and efficacy of nanotechnology, we think that a new proactive approach is necessary, based on pre-regulatory safety assessment and dialogue between stakeholders. On the basis of the work carried out in different European Union (EU) initiatives, developing and integrating MNMs Safe-by-Design and Trusted Environments (NANoREG, ProSafe, and NanoReg2), we present our point of view here. This concept, when fully developed, will allow for cost effective industrial innovation, and an exchange of key information between regulators and innovators. Regulators are thus informed about incoming innovations in good time, supporting a proactive regulatory action. The final goal is to contribute to the nanotechnology governance, having faster, cheaper, effective, and safer nano-products on the market.

Signature of the Collaboration agreement contract between CERN and IASS on High Current, Long Distance Superconducting Power Transmission Lines signed Dr.Steve Myers Director of Acc Tech and Prof. Carlo Rubbia.

CERN Multimedia

Maximilien Brice

2012-01-01

Signature of the Collaboration agreement contract between CERN and IASS on High Current, Long Distance Superconducting Power Transmission Lines signed Dr.Steve Myers Director of Acc Tech and Prof. Carlo Rubbia.

High School Computer Science Education Paves the Way for Higher Education: The Israeli Case

Science.gov (United States)

Armoni, Michal; Gal-Ezer, Judith

2014-01-01

The gap between enrollments in higher education computing programs and the high-tech industry's demands is widely reported, and is especially prominent for women. Increasing the availability of computer science education in high school is one of the strategies suggested in order to address this gap. We look at the connection between exposure to…

TechTutorer - en ny måde at integrere teknologi i læreruddannelsen?

DEFF Research Database (Denmark)

Heiberg, Tobias; Arstorp, Ann-Thérèse

’TechTutor-enheden’ skal ses. I rapporten uddybes initiativet, men helt enkelt kan TechTutorerne beskrives som en gruppe af lærerstuderende med særlige kompetencer og interesser inden for det teknologiske felt. Og de samarbejder som TechTutorer om udbud af diverse kursusforløb samt udvikling af...... læreruddannelsen, når det kommer til didaktisering og implementering af teknologi – alt sammen med rapportens forfattere som koordinerende og kvalificerende element. TechTutor-initiativet skal altså overordnet ses som et eksperiment, der centrerer sig omkring nye vinkler på kvalificering og optimering af...

Biomedical Engineering Bionanosystems Research at Louisiana Tech University

Energy Technology Data Exchange (ETDEWEB)

Palmer, James; Lvov, Yuri; Hegab, Hisham; Snow, Dale; Wilson, Chester; McDonald, John; Walker, Lynn; Pratt, Jon; Davis, Despina; Agarwal, Mangilal; DeCoster, Mark; Feng, June; Que, Long; O' Neal, Chad; Guilbeau, Eric; Zivanovic, Sandra; Dobbins, Tabbetha; Gold, Scott; Mainardi, Daniela; Gowda, Shathabish; Napper, Stan

2010-03-25

2 billion gallons of cellulosic ethanol by 2013. Louisiana is well positioned to become a national contributor in cellulosic ethanol, with an excellent growing season, a strong pulp/paper industry, and one of the nation's first cellulosic ethanol demonstration plants. Dr. Palmer in Chemical Engineering at Louisiana Tech University is collaborating with Drs. Lvov and Snow in Chemistry and Dr. Hegab in Mechanical Engineering to capitalize on these advantages by applying nanotechnology to improve the cellulosic ethanol processes. In many of these processes, expensive enzymes are used to convert the cellulose to sugars. The nanotechnology processes developed at Louisiana Tech University can immobilize these enzymes and therefore significantly reduce the overall costs of the process. Estimates of savings range from approximately $32 million at each cellulosic ethanol plant, to $7.5 billion total if the 16 billion gallons of cellulosic ethanol is achieved. This process has the advantage of being easy to apply in a large-scale commercial environment and can immobilize a wide variety or mixture of enzymes for production. Two primary objectives with any immobilization technique are to demonstrate reusability and catalytic activity (both reuse of the immobilized enzyme and reuse of the polymer substrate). The scale-up of the layering-by-layering process has been a focus this past year as some interesting challenges in the surface chemistry have become evident. Catalytic activity of cellulase is highly dependent upon how the feed material is pretreated to enhance digestion. Therefore, efforts this year have been performed this year to characterize our process on a few of the more prevalent pretreatment methods.

Strategic planning decisions in the high tech industry

CERN Document Server

Daim, Tugrul; Beyhan, Berna; Basoglu, Nuri

2013-01-01

The scale and complexity of research and practices of open innovation mandate a correspondingly sophisticated form of decision making. Strategic Planning Decisions brings together a number of tools that ease the decision process in technology companies, providing both conceptual frameworks and practical applications. Innovative approaches are presented such as an ontology-based model where all the relevant aspects of a potential technology are interrelated to provide a comprehensive and logically connected data pool for decision makers. Divided into two sections, Strategic Planning Decisions describe both strategic approaches using the decision tools, and tactical approaches. Some of these tools are expanded while some others are embedded in a model that will lay the ground for practical application. These include: ·         bibliometric analysis, ·         ontology, ·         roadmapping, ·         lead user, six sigma, and ·         multi-actor & multi-object...

Asian high tech streamlines traditional industry | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

2010-10-28

Oct 28, 2010 ... "Synapse, our software monitoring system, optimizes the process by monitoring temperatures," explains Gunasingham. ... workflow solutions, web publishing, and hospital information systems. ... IDRC Digital Library

Delivering a Paper (and other works) at #LowTechLabLondon2016

OpenAIRE

O'Connell, Micheal

2016-01-01

Performance 'Delivering a Paper' and screened/presented/exhibited other works such as 'How to Buy Nothing' related to author's interventionist art practice at this three-day event.\\ud \\ud #LowTechLabLondon2016 is a project developed by Raúl Marroquín and coordinated by Daniela Medina Poch for the Educational Program of the Saatchi Gallery that will take place on January 15th, 16th and 17th of 2016.\\ud \\ud “‘LowTech means technology that is cheap or free.”\\ud James Wallback, LowTech Manifest f...

Joint competition – the world dominance of Danish fur production

DEFF Research Database (Denmark)

Christensen, Jesper Lindgaard

2010-01-01

Low-tech industries provide a substantial contribution to the Western economies and there is a growing literature that criticizes the over-emphasis both policies and economic analyses often put on high-tech industries. Clusters have been pointed to as instrumental for small firms in meeting...... the challenges of a globalised, knowledge-based economy because they are known to have deeper specialization, which in turn is seen as a prerequisite for constructing comparative advantages and industrial strongholds. The paper takes the point of departure in the Danish fur production and an agglomeration...... of production of mink/furs in North/North-Western Jutland, Denmark. This industry has been by far the major producer in the world with a large world market share. Two paradoxes needs to be explained: the world dominance of a low-tech, labour intensive sector by a small, high-income/high-wage, high-tech country...

Considering a redesign of the Tech United keeper for improved acceleration

NARCIS (Netherlands)

Roest, de A.; Steinbuch, M.; Rosielle, P.C.J.N.

2011-01-01

The report describes the explorations to design a new keeper for Tech United. The performance of the current robot was disappointing and one of the reasons that Tech United lost the finals at the world championship last year. The goal of this report is to provide suggestions for the design of a new

The role of safe practices in hospitals’ total factor productivity

Directory of Open Access Journals (Sweden)

Timothy R Huerta

2011-01-01

Full Text Available Timothy R Huerta1, Mark A Thompson2, Eric W Ford31Center for Health Innovation, Education, and Research, 2Rawls College of Business, Texas Tech University, Lubbock, TX, USA; 3Forsyth Medical Center Distinguished Professor of Health Care, The University of North Carolina Greensboro, Greensboro, NC, USAAbstract: The dual aims of improving safety and productivity are a major part of the health care reform movement hospital leaders must manage. Studies exploring the two phenomena conjointly and over time are critical to understanding how change in one dimension influences the other over time. A Malmquist approach is used to assess hospitals’ relative productivity levels over time. Analysis of variance (ANOVA algorithms were executed to assess whether or not the Malmquist Indices (MIs correlate with the safe practices measure. The American Hospital Association’s annual survey and the Centers for Medicare and Medicaid Services’ Case Mix Index for fiscal years 2002–2006, along with Leapfrog Group’s annual survey for 2006 were used for this study. Leapfrog Group respondents have significantly higher technological change (TC and total factor productivity (TFP than nonrespondents without sacrificing technical efficiency changes. Of the three MIs, TC (P < 0.10 and TFP (P < 0.05 had significant relationships with the National Quality Forum’s Safe Practices score. The ANOVA also indicates that the mean differences of TFP measures progressed in a monotonic fashion up the Safe Practices scale. Adherence to the National Quality Forum’s Safe Practices recommendations had a major impact on hospitals’ operating processes and productivity. Specifically, there is evidence that hospitals reporting higher Safe Practices scores had above average levels of TC and TFP gains over the period assessed. Leaders should strive for increased transparency to promote both quality improvement and increased productivity.Keywords: safety, productivity, quality, safe

Transformative capabilities in the “very Old economy”: Intersectoral Innovation networks and learning alliances

Directory of Open Access Journals (Sweden)

Klaus Schmierl

2007-05-01

Full Text Available The central starting point of the paper is that well-known classical patterns of creating innovations are changing. Innovation processes aren’t originated exclusively within ‘knowledge intensive’ (high-tech companies any more, but rather mutually between companies of different sectors. This has twofold consequences: On the one hand, the so-called high-tech industry influences non-high-tech branches as well as important suppliers of innovative solutions. On the other hand, the particular requirements and conditions of so-called low-tech branches affect companies of high-tech industries as specific drivers of innovation, too. Considered as a productive force, intersectoral cooperation becomes a main source of innovation, further growing in importance; innovation processes are more and more organized along “distributed knowledge bases” across economic sectors.Therefore, the main thesis of the paper is that today´s knowledge isn’t located within one company originating from one industrial sector any more, but is distributed along the respective value-chain and various sectors. At the same time, the “network” is not only relevant in technology-intensive branches such as IT industry or automotive industry, but becomes also a relevant analytical category for exploring “low-tech” industries and their innovation processes.

Racial and Mental Illness Stereotypes and Discrimination: An Identity-Based Analysis of the Virginia Tech and Columbine Shootings

OpenAIRE

Chen, Charlene Y.; Purdie-Vaughns, Valerie; Phelan, Jo C.; Yu, Gary; Yang, Lawrence H.

2014-01-01

The Virginia Tech and Columbine High shootings are 2 of the deadliest school massacres in the United States. The present study investigates in a nationally representative sample how White Americans’ causal attributions of these shooting moderate their attitudes toward the shooter’s race. White Americans shown a vignette based on the Virginia Tech shooting were more likely to espouse negative beliefs about Korean American men and distance themselves from this group the more they believed that ...

Produtividade e rendimento de sementes de pinhão-manso submetido à irrigação e adubação com OMM-Tech Response of Jatropha Curcas L. crop to irrigation and fertilization with OMM-Tech

Directory of Open Access Journals (Sweden)

Adão W. P. Evangelista

2011-04-01

Full Text Available Com o objetivo de avaliar os efeitos da irrigação e aplicação do fertilizante Organo-Minerais-Marinhos + Biotech® (OMM-Tech na produtividade e rendimento do pinhão-manso, um experimento foi instalado em Lavras - MG. O delineamento estatístico utilizado foi o de blocos casualizados, com parcelas subdivididas, contendo três repetições. As parcelas receberam tratamentos constituídos por três formas de aplicação do fertilizante OMM-Tech, ou seja: T1 = Testemunha (Sem OMM-Tech; T2 = via solo (120 kg ha-1 de OMM-Tech na forma de pó; T3 = via foliar (OMM-Tech na forma líquida e na concentração de 5%; e T4 = via solo + foliar (60 kg ha-1 de OMM-Tech na forma de pó + OMM-Tech na forma líquida, na concentração de 2,5%. As sub-parcelas receberam os tratamentos de manejo de água, ou seja, com e sem irrigação. O sistema de irrigação utilizado foi o gotejamento, com emissores espaçados a cada 0,50 m. Para avaliar a resposta da cultura, utilizaram-se dados de produtividade e rendimento de sementes referentes ao primeiro ano de produção. Os tratamentos aplicados produziram efeitos significativos sobre o rendimento e a produtividade da cultura. As plantas irrigadas e adubadas com OMM-Tech pó, via solo, na dose de 120 kg ha-1, foram as que apresentaram o melhor resultado.The purpose of this study was to evaluate the effects of irrigation and application of Organo-Minerals-Marine+Biotech (OMM-Tech in yield and production efficiency of the Jatropha curcas. The experiment was conducted in an experimental area located in Federal University of Lavras, Brazil. A randomized block design with subdivided parcels and three replications was used. The parcels were submitted to different OMM-Tech fertilizer application methods: T1= control (no OMM-Tech; T2 = soil application (120 kg ha-1 of OMM-Tech in a powder form; T3 = leaf application (OMM-Tech in a liquid form with a 5% concentration; T4 = soil + leaf application (60 kg ha-1 of OMM-Tech as

From scientific instrument to industrial machine coping with architectural stress in embedded systems

CERN Document Server

Doornbos, Richard

2012-01-01

Architectural stress is the inability of a system design to respond to new market demands. It is an important yet often concealed issue in high tech systems. In From scientific instrument to industrial machine, we look at the phenomenon of architectural stress in embedded systems in the context of a transmission electron microscope system built by FEI Company. Traditionally, transmission electron microscopes are manually operated scientific instruments, but they also have enormous potential for use in industrial applications. However, this new market has quite different characteristics. There are strong demands for cost-effective analysis, accurate and precise measurements, and ease-of-use. These demands can be translated into new system qualities, e.g. reliability, predictability and high throughput, as well as new functions, e.g. automation of electron microscopic analyses, automated focusing and positioning functions. From scientific instrument to industrial machine takes a pragmatic approach to the proble...

Dutch-Russian Double Degree Master's Program Curricula in Computational Science and High Performance Computing

NARCIS (Netherlands)

Bilyatdinova, A.; Dukhanov, A.; Bochenina, K.; Boukhanovsky, A.V.; Krzhizhanovskaya, V.V.; Sloot, P.M.A.

2014-01-01

From the moment of the fall of the Soviet Union in 1991, Russian higher education underwent drastic changes to international standards and enter the European Higher Education Area on equal terms. Joint efforts of Russian and Dutch peers and strong incentives from high-tech industries helped to

Od bazy bibliograficznej do pe?notekstowej ? wsp??praca og?lnopolskiego Konsorcjum BazTech

OpenAIRE

Buzdygan, Dorota

2015-01-01

W artykule przedstawiono baz? BazTech indeksuj?c? zawarto?? polskich czasopism technicznych. W szczeg?lno?ci om?wiono: zas?b bazy, rodzaje rekord?w, sposoby dost?pu i prezentacji zawartych w bazie informacji. Om?wiono etapy przekszta?cania bazy z bibliograficznej-abstraktowej w pe?notekstow?. Zaprezentowano tw?rc?w bazy czyli wsp??pracuj?ce, od prawie 20 lat, tworz?ce Konsorcjum BazTech, biblioteki wy?szych uczelni technicznych i instytut?w naukowych. The article presents the BazTech da...

The oil and gas industry and the Canadian economy: a backgrounder

International Nuclear Information System (INIS)

1999-06-01

The technological and economic significance of the Canadian petroleum industry to the national economy and to Canada's standing in the world are reviewed. The six key ways in which the oil and gas industry affects Canada, namely employment, balance of trade, products, government revenues, international technology trade and community support are stressed within the context of describing present and future oil and gas resources, Canada's petroleum and natural gas trade balance, and capital spending and product sales. Attention is also drawn to the role of the Canadian petroleum and natural gas industry as a producer and exporter of world class technology, especially in the areas of high tech exploration methods, cold-climate and offshore operations, enhanced recovery techniques, heavy oil production and and processing, mining and upgrading of oil sands bitumen, oil well firefighting, and environmental protection technology. maps, figs

Report on achievements of research and development of an automatic sewing system in fiscal 1988. High-tech assembling sub-system; 1998 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. Haiteku assemble sub system

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-03-01

The Automatic Sewing System Technology Research Association was commissioned from the Agency of Industrial Science and Technology on research of a production system by apparel types and systematization of an experiment plant. As the research on systematizing the experiment plant, the association is tackling with the researches on a high-speed laser cutting sub-system, a flexible sewing sub-system, a hi-tech assembling sub-system, and a three-dimensional flexible pressing sub-system. This paper reports the achievement of the research and development on the hi-tech assembling sub-system. This system was studied by grouping the system into a seam sewing technology and a three-dimensional sewing technology. The former technology deals with the processes of seam sewing of the side of the left body part in a model wear, sew-up margin division, straightening, and back center seam sewing. The latter technology deals with the sleeve fitting process. Although these processes are the subject of automated system, it is difficult to automate the back collar sewing, shoulder sewing and front collar sewing after the back center seam sewing process to just before the sleeve fitting process. Therefore, these processes are processed by retrofitting and three-dimensional sewing devices, and a control computer to transmit, receive and control the information required for the devices. The utilizing conditions of the sub-system constituting devices and the component technologies are tabulated in a table. (NEDO)

Enhancing STEM Education through Cubesats: Using Satellite Integration as a Teaching Tool at a Non-Tech School

Science.gov (United States)

Bernardes, S.; Cotten, D. L.

2016-12-01

University-based satellite programs have been successfully used as a platform for teaching STEM related fields, bringing tremendous benefits to graduate and undergraduate education. Considering their infrastructure and curricula, tech schools have traditionally been considered logical candidates for hosting such programs. More recently, with the dissemination of small satellites initiatives, non-tech schools have been presented the opportunity of developing satellite design and implementation programs. This work reports on the experiences and challenges associated with implementing a satellite program at the University of Georgia (UGA), a non-tech university. With funding from the Air Force Research Laboratory's (AFRL) University Nanosat Program (UNP) and NASA's Undergraduate Student Instrument Project (USIP) a team of undergraduates at UGA has recently been tasked with building two small satellites and helping to create a Small Satellite Research Laboratory (SSRL) at the university. Unique features of the satellite program at UGA include its team of students from a broad range of backgrounds and departments (Engineering, Computer Science, Art, Business, and Geography) and the previous exposure of many of these students to synergistic technologies, including arduino and unmanned aerial systems. We show how informal exposure to those technologies and willingness of students to focus on areas outside of their field of study can benefit from the implementation of satellite programs. In this regard, we report on methods and techniques used to find and recruit driven and knowledgeable students to work in a high paced field such as satellite system integration. We show how students and faculty from multiple departments have collaborated to reach a common, far reaching goal and describe our proposed methods to evaluate and measure educational goals based around SSRL and its projects. We also present the challenges associated with the lack of a developed engineering

Solar and solar industry market in China. A Market Overview; Solarmarkt und Solarbranche in China. Eine Marktuebersicht

Energy Technology Data Exchange (ETDEWEB)

Kiefer, Thomas

2011-07-01

A few years ago due to high subsidies, almost half of the world's newly installed solar systems have been established in Germany. Chinese companies in particular benefited from this arrangement and rose to become the largest mass producers in the world. The development in China is based less on technology theft and cheap production, as is often complained in Germany. China is rising by its own research and more efficient industry structures to a high-tech location. (orig.)

Hi-tech products marketing and competitive advantage

Directory of Open Access Journals (Sweden)

Perović Jelena

2004-01-01

Full Text Available The company today, in causes turbulent environment and intensive integrations must cooperate, accept and develop high technology in order to achieve needs of customers. It's only way that companies replay on challenge global environment, decrease costs of investment per capita, decrease the risk, captivate new market and held competitive in causes of global market. High tech technology marketing function is help that results of new technology transfer on economy. Their function is reach need of customers, too. Positive influence of technology is the highest in area of production costs and productivity. Speed years are in front of our and it demands larger productivity, which primary source must be technology changes. High technology marketing is the most provocative framework for take competitive advantage, answer on global change and way of permanent reach rigorous need of customers.

Supplier challenges in health tech innovation

DEFF Research Database (Denmark)

Rolfstam, Max

Suppliers, in particular small innovative firms, is an important contributor not only for innovation in health-tech, but also a component to consider in the light of the emerging policy interest for using public procurement as a means to stimulate innovation. Research on barriers preventing...

Italian competitiveness in high technology industries

International Nuclear Information System (INIS)

Ferrari, S.; Palma, D.; Amendola, G.

1993-01-01

A sectoral analysis of 1978-1991 trends in the invention, manufacturing and marketing, in Italy, of high technology goods suggests the need for greater R ampersand D investment by government and private industry and a broadening of the number and type of industries now contributing to the strengthening of this nation's overall high technology industrial base. This is especially the case with regard to the electronics sector in view of the strategic importance of this vital industry and the strong competition being given by the newly industrialized countries located on the Pacific Rim. With reference to the European Communities common market strategies, intended as a buffer against future unified efforts by North American and Pacific Rim countries to consolidate global market share in high technology goods, recent investment trends reveal that Italy's response thus far has been slow and asymmetric

78 FR 14359 - Verizon Business Networks Services, Inc., Specialist-Tech Customer Service, Philadelphia, PA...

Science.gov (United States)

2013-03-05

... Business Networks Services, Inc., Specialist-Tech Customer Service, Philadelphia, PA; Verizon Business Networks Services, Inc., Specialist-Tech Customer Service, Tampa, Florida; Amended Certification Regarding... should [[Page 14360

State of FinTech in Europe: Mutation perspectives of the banking sector

OpenAIRE

Marasco, Marco

2017-01-01

This paper studies the relationship between FinTech start-ups and the banking sector. The aim is to assess the impact that the FinTech sector might have on the business model and profitability of banks. Master [120] en sciences de gestion (Mons), Université catholique de Louvain, 2017

Develop applications based on android: Teacher Engagement Control of Health (TECH)

Science.gov (United States)

Sasmoko; Manalu, S. R.; Widhoyoko, S. A.; Indrianti, Y.; Suparto

2018-03-01

Physical and psychological condition of teachers is very important because it helped determine the realization of a positive school climate and productive so that they can run their profession optimally. This research is an advanced research on the design of ITEI application that able to see the profile of teacher’s engagement in Indonesia and to optimize the condition is needed an application that can detect the health of teachers both physically and psychologically. The research method used is the neuroresearch method combined with the development of IT system design for TECH which includes server design, database and android TECH application display. The study yielded 1) mental health benchmarks, 2) physical health benchmarks, and 3) the design of Android Application for Teacher Engagement Control of Health (TECH).

Simple systems abroad coupled to hight-tech solutions : MexiCultura: cooperation between Holland and Mexico

NARCIS (Netherlands)

Velden, van P.; Elings, A.

2015-01-01

Doing business with Mexican entrepreneurs is high on the wish list of Dutch companies. That’s not so simple when you’re used to building high-tech greenhouses. Yet the local growers want to improve their current methods of production. The Dutch can be of service by offering knowledge about simple

The case for reprocessing: the operational experience of a modern reprocessing industry

International Nuclear Information System (INIS)

Giraud, J.P.; Kelly, W.

1993-01-01

Reprocessing is a high-tech industry that works. An impressive effort of R and D, industrial deployment and operational experience has been accumulated by COGEMA and BNFL, leading these companies to offer a commercial service which is the only proper management of spent fuel and waste that is both technically demonstrated and qualified by the safety authorities of European and overseas countries. Reprocessing, as every technology-based industry will continue to progress in the future. Recycling the fissile materials reclaimed from spent fuel: uranium and plutonium, is the complementary and indispensable last link to effectively close the fuel cycle and control in particular the production of plutonium and other long-lived actinides. This paper will describe the state of development attained in France and Great Britain and will underline the main advantages of the reprocessing/recycling strategy

AegeanMarTech project: General Introduction

Science.gov (United States)

Psarra, S.; Zervakis, V.; Karageorgis, A. P.

2017-10-01

This issue of "Continental Shelf Research" is dedicated to the study of processes potentially responsible for the relatively high productivity of the North Aegean Sea in comparison to other regions of the Eastern Mediterranean. This region, one of the most important fishing grounds in the eastern Mediterranean, is characterized by: i) the inflow of mesotrophic waters of Black Sea (BSW) origin into the North Aegean and their interaction with the more saline Levantine waters (LW); and ii) the wind-generated coastal upwelling occurring every summer in the eastern Aegean. The study of these two natural fertilization mechanisms has been the major aim of the AegeanMarTech project ("Technological and oceanographic cooperation Network for the Study of mechanisms fertilizing the North-East Aegean Sea").

Eco-Industrial Parks from Strategic Niches to Development Mainstream: The Cases of China

Directory of Open Access Journals (Sweden)

Lei Shi

2014-09-01

Full Text Available China has implemented eco-industrial park (EIP initiatives as a mainstream strategy of a circular economy since the turn of the new century. This paper presents the sustainable transition processes and outcomes of three EIP cases, Tianjin Economic and Technological Development Area (TEDA, Fuzhou Economic and Technological Development Area (FEDA and the Xi’an High-Tech Zone (XHTZ. The cases uncovered four factors key to the transition of EIPs: technological trajectory dependency, spaces for experimentation, government as an enabler and regional embeddedness.

Synthetic fiber technology evolving into a high-tech field

Energy Technology Data Exchange (ETDEWEB)

Yumura, Takao

1988-07-01

This paper reports the trend of synthetic fiber technology. Representative synthetic fibers are nylon, polyester, and acrylic. Researchers are studying the continuation of polymerization processes, high-efficiency catalysts, thin-film polymerization, the possibility of energy saving by interfacial polymerization, and small quantities of a large variety of items method. They are making considerable progress in accelerating, simplifying, and rationalizing production processes. As a result, they have already omitted the elongation chamber and realized the continuation of spinning and elongation processes. The textile industry is planning to adopt a super-fast spinning system. To meet customers' needs for a wider variety of advanced materials, researchers are developing differential, high-value-added materials. High functions are added to fibers during all processes including polymerization, spinning, thread or cotton making, knitting, and after-treatment. Researchers have developed new materials looking exactly like silk or wool, having aesthetic properties, artificial suede, and combining moisture permeability and waterproofness. New materials developed for high-technology purposes include carbon fiber, aramid fiber that obtains high strength and elasticity without being elongated, high-strength, and high-elasticity super-high-polymer polyethylene fiber. (3 figs, 1 tab)

Linking Technology Capabilities to Marketing Requirements: Case of Indonesian Aircraft Industry

Directory of Open Access Journals (Sweden)

Yulianto Suharto

2014-08-01

Full Text Available Abstract. The relationship between strategic technology planning and the overall business strategy has been one of the growing fields that attract much interest both from academics and industrials point of view. The increasingly important role that technology plays in today’s business success is well established.Strategic technology planning activities--within a corporate level--are often implemented by applying integrated planning instrument, which allow firms to consider both technology-oriented and product-oriented aspects. This paper is an attempt to explore the role of strategic planning in the high tech industry using a specific case of aerospace industry in Indonesia.  In order to compete effectively inthe open global marketplace, the company must learn to integrate technology managementwith strategic planning. In other words, all top managers have to linktheir technology capabilities to marketing requirements.Keywords:  technology planning; business strategy; technology capability; marketing requirement; strategic mix 

A Novel Consensus-Based Particle Swarm Optimization-Assisted Trust-Tech Methodology for Large-Scale Global Optimization.

Science.gov (United States)

Zhang, Yong-Feng; Chiang, Hsiao-Dong

2017-09-01

A novel three-stage methodology, termed the "consensus-based particle swarm optimization (PSO)-assisted Trust-Tech methodology," to find global optimal solutions for nonlinear optimization problems is presented. It is composed of Trust-Tech methods, consensus-based PSO, and local optimization methods that are integrated to compute a set of high-quality local optimal solutions that can contain the global optimal solution. The proposed methodology compares very favorably with several recently developed PSO algorithms based on a set of small-dimension benchmark optimization problems and 20 large-dimension test functions from the CEC 2010 competition. The analytical basis for the proposed methodology is also provided. Experimental results demonstrate that the proposed methodology can rapidly obtain high-quality optimal solutions that can contain the global optimal solution. The scalability of the proposed methodology is promising.

Influencing behaviour for safe working environments

OpenAIRE

Boer, de, J. (Johannes); Teeuw, W.B. (Wouter)

2011-01-01

Safety at work The objective of the project Safety at Work is to increase safety at the workplace by applying and combining state of the art artefacts from personal protective equipment and ambient intelligence technology. In this state of the art document we focus on the developments with respect to how (persuasive) technology can help to influence behaviour in a natural, automatic way in order to make industrial environments safer. We focus on personal safety, safe environments and safe beh...

Workplace High Tech Spurs Retraining Efforts.

Science.gov (United States)

Davis, Dwight B.

1984-01-01

Discusses who should provide training for displaced workers who need new skills. Areas examined include: (1) the need for retraining; (2) current corporate efforts; (3) agreements in the automotive industry; (4) job quality; (5) the federal government's role; and (6) federal legislation related to the problem. (JN)

Tech-X Corporation releases simulation code for solving complex problems in plasma physics : VORPAL code provides a robust environment for simulating plasma processes in high-energy physics, IC fabrications and material processing applications

CERN Multimedia

2005-01-01

Tech-X Corporation releases simulation code for solving complex problems in plasma physics : VORPAL code provides a robust environment for simulating plasma processes in high-energy physics, IC fabrications and material processing applications

Evaluation of Simple and Inexpensive High-Throughput Methods for Phytic Acid Determination

DEFF Research Database (Denmark)

Raboy, Victor; Johnson, Amy; Bilyeu, Kristin

2017-01-01

High-throughput/low-cost/low-tech methods for phytic acid determination that are sufficiently accurate and reproducible would be of value in plant genetics, crop breeding and in the food and feed industries. Variants of two candidate methods, those described by Vaintraub and Lapteva (Anal Biochem...... and legume flours regardless of endogenous phytic acid levels or matrix constituents....

Electronics Technology. Tech Prep Competency Profile.

Science.gov (United States)

Lakeland Tech Prep Consortium, Kirtland, OH.

This tech prep competency profile covers the occupation of electronics technician. Section 1 provides the occupation definition. Section 2 lists development committee members. Section 3 provides the leveling codes--abbreviations for grade level, (by the end of grade 12, by the end of associate degree), academic codes (communications, math, or…

Critical brand innovation factors (CBIF): understanding innovation and market performance in the Chinese high-tech service industry

OpenAIRE

Nguyen, Bang; Yu, Xiaoyu; Melewar, T. C.; Gupta, Suraksha

2016-01-01

Brand innovation sweeps aside established practices and disrupts the status quo, resulting in the transformation of markets. The present study develops and tests a model of critical brand innovation factors (CBIF) by examining key factors influencing firm-level brands' innovation and increased market performance. Adapting both organizational elements and market response characteristics, the model integrates four key variables in China's industrial service markets: innovation, internationaliza...

Sposoby i skuteczność promocji bibliograficznej bazy danych BazTech

OpenAIRE

Derfert-Wolf, Lidia; Buzdygan, Dorota

2015-01-01

[The ways and effectiveness of promotion bibliographic database BazTech] The article outlines the strategy promotion database BazTech, which indexes Polish scientific journals in the field of technical sciences. The implementation steps of key tools promotion: cycle of seminars, profile on a social networking site, movie, infographics, leaflets. Shows the target groups, the expected results and contractors. Indicated realised at the same time promotion activities, open access and increasing v...

Development of AZS refractories for the glass industry

International Nuclear Information System (INIS)

Guzman, A.M.; Rodriguez, P.

2004-01-01

Refractory materials can support high temperatures, thermal strength and the contact with aggressive environments, for this reason they are widely used in the cement, glass and steel industry. Commercial AZS (alumina-zirconia-silica) refractories are a good alternative in refractory materials for the glass industry' because they can support the aggressive conditions during liquid processing of glass. However, another problem encountered in glass industry is contamination by refractory' material that fall into the molten glass, which can produce a series of defects in the final product. This research was conducted to develop new formulations of AZS refractories with different amounts of ZrO 2 with the purpose of improving the characteristics, properties and the work conditions in the glass melting furnaces and, at the same time, lower the costs this type of refractories. The results obtained indicate that the composition with low content of ZrO 2 can provide better properties than the commercial product, with some modifications in the particle size distribution. Copyright (2004) AD-TECH - International Foundation for the Advancement of Technology Ltd

Analysis of the key issues in establishing the Russian-based high technological companies

Directory of Open Access Journals (Sweden)

V. G. Zinov

2016-01-01

Full Text Available The article analyses the reasons that prevent a competitive export-oriented Russian domestic development of the robot surgical complex from being industrially prototyped and serially released for the domestic and global market. The development is completed within the framework of a «priority project» which was also highlighted as of significant importance in the Forecast analysis of the scientific-technological development of Russia for the period of up until 2030 and in the road maps of the National technological initiative and other strategic documents. The project was financed by nearly all development funds and institutes in Russia. A conclusion is drawn that the key reason behind the significant increase in a life span of a high-tech market product is the absence of a target setting and a programme of coordinated actions from committed ministries and governmental agencies, as well as the lack of a large high tech company in Russia, capable of producing in industrial volumes the export-oriented products and ensure their global sales.

AspenTech shows specific tools for refiners; AspenTech deploie des outils specifiques pour les raffineurs

Energy Technology Data Exchange (ETDEWEB)

Legros, E

2003-10-01

The supplier of integrated softwares AspenTech has organized last May, the 7 in Gelsenkirchen, on the site of the Veba Oel refinery, a seminar 'refining' intended to show the specificities of its products: Hysys, Aspen Utilities, Icarus...About fifty German engineers and responsible persons coming from refining and engineering firms have participated to this studies day. (O.M.)

Hagerstown Community College: Building a High Tech Base.

Science.gov (United States)

Regional Technology Strategies, Inc., Carrboro, NC.

This document describes the Advanced Technology Center (ATC) at Hagerstown Community College (HCC) (Maryland), created in 1990 as a response to the region's economic decline. The ATC is a partnership between the College, industry, and government to help promote industrial modernization and regional competitiveness through training, demonstration,…

Birth of Industry 5.0: Making Sense of Big Data with Artificial Intelligence, "The Internet of Things" and Next-Generation Technology Policy.

Science.gov (United States)

Özdemir, Vural; Hekim, Nezih

2018-01-01

Driverless cars with artificial intelligence (AI) and automated supermarkets run by collaborative robots (cobots) working without human supervision have sparked off new debates: what will be the impacts of extreme automation, turbocharged by the Internet of Things (IoT), AI, and the Industry 4.0, on Big Data and omics implementation science? The IoT builds on (1) broadband wireless internet connectivity, (2) miniaturized sensors embedded in animate and inanimate objects ranging from the house cat to the milk carton in your smart fridge, and (3) AI and cobots making sense of Big Data collected by sensors. Industry 4.0 is a high-tech strategy for manufacturing automation that employs the IoT, thus creating the Smart Factory. Extreme automation until "everything is connected to everything else" poses, however, vulnerabilities that have been little considered to date. First, highly integrated systems are vulnerable to systemic risks such as total network collapse in the event of failure of one of its parts, for example, by hacking or Internet viruses that can fully invade integrated systems. Second, extreme connectivity creates new social and political power structures. If left unchecked, they might lead to authoritarian governance by one person in total control of network power, directly or through her/his connected surrogates. We propose Industry 5.0 that can democratize knowledge coproduction from Big Data, building on the new concept of symmetrical innovation. Industry 5.0 utilizes IoT, but differs from predecessor automation systems by having three-dimensional (3D) symmetry in innovation ecosystem design: (1) a built-in safe exit strategy in case of demise of hyperconnected entrenched digital knowledge networks. Importantly, such safe exists are orthogonal-in that they allow "digital detox" by employing pathways unrelated/unaffected by automated networks, for example, electronic patient records versus material/article trails on vital medical information; (2) equal

High Touch and High Tech (HT2) Proposal: Transforming Patient Engagement Throughout the Continuum of Care by Engaging Patients with Portal Technology at the Bedside.

Science.gov (United States)

McAlearney, Ann Scheck; Sieck, Cynthia J; Hefner, Jennifer L; Aldrich, Alison M; Walker, Daniel M; Rizer, Milisa K; Moffatt-Bruce, Susan D; Huerta, Timothy R

2016-11-29

For patients with complex care needs, engagement in disease management activities is critical. Chronic illnesses touch almost every person in the United States. The costs are real, personal, and pervasive. In response, patients often seek tools to help them manage their health. Patient portals, personal health records tethered to an electronic health record, show promise as tools that patients value and that can improve health. Although patient portals currently focus on the outpatient experience, the Ohio State University Wexner Medical Center (OSUWMC) has deployed a portal designed specifically for the inpatient experience that is connected to the ambulatory patient portal available after discharge. While this inpatient technology is in active use at only one other hospital in the United States, health care facilities are currently investing in infrastructure necessary to support large-scale deployment. Times of acute crisis such as hospitalization may increase a patient's focus on his/her health. During this time, patients may be more engaged with their care and especially interested in using tools to manage their health after discharge. Evidence shows that enhanced patient self-management can lead to better control of chronic illness. Patient portals may serve as a mechanism to facilitate increased engagement. The specific aims of our study are (1) to investigate the independent effects of providing both High Tech and High Touch interventions on patient-reported outcomes at discharge, including patients' self-efficacy for managing chronic conditions and satisfaction with care; and (2) to conduct a mixed-methods analysis to determine how providing patients with access to MyChart Bedside (MCB, High Tech) and training/education on patient portals, and MyChart Ambulatory (MCA, High Touch) will influence engagement with the patient portal and relate to longer-term outcomes. Our proposed 4-year study uses a mixed-methods research (MMR) approach to evaluate a

Long-term problem for the nuclear industry

International Nuclear Information System (INIS)

Norman, C.

1982-01-01

Dismantling of the 24-year-old Shippingport atomic power station over the next two years will test whether the nuclear industry can safely dispose of high-level radioactive facilities. Recent findings that some components will remain radioactive longer than anticipated may require dismantling instead of the permanent entombment the industry was planning. The five-year dismantlement will cost $40 million and generate 11,700 cubic meters of radioactive waste. Larger reactors will be even more costly. Current regulations require utilities to choose between dismantlement, safe storage, or entombment of contaminated materials. Each has its problems, but the industry objects to an evolving policy for dismantling and an accompanying requirement for a segregated decommissioning fund that would be set aside before a reactor begins operating or during plant lifetime. The latter would require an adequate insurance mechanism to cover premature shutdown

Power and compression : both high-tech and low-tech combos succeed

Energy Technology Data Exchange (ETDEWEB)

Budd, G.

2006-05-15

Recently commercialized compressors were discussed. The Gas Hog is a low-horsepower compressor with a piston rod that is driven by 2 sheaves with a wrist pin. The piston has a huge 48 inch stroke which operates at only 45 revolutions per minute (RPM), which cuts down on mechanical wear and tear. There are fewer strokes per cubic foot of gas compressed, meaning that there is less waste of compression. There are currently 100 Gas Hog units in the field, as its suction/discharge profile is well suited to coalbed methane activities. The Gas Hog also has a muffler to reduce exhaust noise, and its engine compartment can be insulated. The new range of gas compressors from Brahma is designed to provide greater precision for greater energy efficiency. Varying screw speeds enhance production, allowing operators to manually adjust speeds. Scroll compressor technology has gained widespread acceptance over the last 15 years in the air conditioning and refrigeration industry, and is now being applied to oil and gas applications in vapour recovery, casing pressure modification, conventional gas and coalbed methane. The compressors can be run for a year without maintenance and can react within milliseconds to pressure change. The electric motor shaft, main bearing, counterweights and scroll are housed within a sealed unit. There are no external or internal shafts and seals to check or lubricate. There are no leaks, and no need for periodic alignment of belts. It was concluded that localized power sources will remain a key to the expanding wellhead compressor sector, due to the high cost of installing power lines for electricity. 1 fig.

Opportunities for optics within high-tech of tomorrow

DEFF Research Database (Denmark)

Hanson, Steen Grüner; Jakobsen, Michael Linde; Iversen, Theis F. Q.

2011-01-01

The use of miniaturized optical sensors as input devices based on speckle phenomena will be discussed alongside with some considerations on the path to industrial implementation.......The use of miniaturized optical sensors as input devices based on speckle phenomena will be discussed alongside with some considerations on the path to industrial implementation....

Racial and Mental Illness Stereotypes and Discrimination: An Identity-Based Analysis of the Virginia Tech and Columbine Shootings

Science.gov (United States)

Chen, Charlene Y.; Purdie-Vaughns, Valerie; Phelan, Jo C.; Yu, Gary; Yang, Lawrence H.

2015-01-01

The Virginia Tech and Columbine High shootings are 2 of the deadliest school massacres in the United States. The present study investigates in a nationally representative sample how White Americans’ causal attributions of these shooting moderate their attitudes toward the shooter’s race. White Americans shown a vignette based on the Virginia Tech shooting were more likely to espouse negative beliefs about Korean American men and distance themselves from this group the more they believed that the shooter’s race caused the shooting. Among those who were shown a vignette based on the Columbine High shooting, believing that mental illness caused the shooting was associated with weaker negative beliefs about White American men. White Americans in a third condition who were given the Virginia Tech vignette and prompted to subtype the shooter according to his race were less likely to possess negative beliefs about Korean American men the more they believed that mental illness caused the shooting. There was no evidence for the ultimate attribution error. Theoretical accounts based on the stereotype and in-group-out-group bias literature are presented. The current findings have important implications for media depictions of minority group behavior and intergroup relations. PMID:25198415

Project COM-TECH (Bilingual Computer- and Technology-Oriented Program), 1985-86. OEA Evaluation Report.

Science.gov (United States)

New York City Board of Education, Brooklyn. Office of Educational Assessment.

In 1985-86, Project COM-TECH offered bilingual individualized instruction to 300 limited-English proficiency students at two New York City high schools (Bushwick in Brooklyn, and Brandeis in Manhattan). Using an enrichment approach, the project provided supplementary instruction in English as a second language (ESL), native language arts, and…

Connecting Teachers and Ed-Tech Developers: Lessons from NYC's "Gap App" Program. Report

Science.gov (United States)

Villavicencio, Adriana; Siman, Nina; Lafayette, Camille; Kang, David

2016-01-01

In 2011, with support from a federal Investing in Innovation grant, the NYC Department of Education launched Innovate NYC Schools. The initiative was designed to address two, related challenges to effectively integrating education technology (ed-tech) into classrooms: First, procurement of ed-tech tools is often hampered by a disconnect between…

Neoindustrialization as a factor in improving economic security of old-industrial regions

Directory of Open Access Journals (Sweden)

Ol’ga Aleksandrovna Romanova

2012-06-01

Full Text Available This paper proves that the paradigm of the world of the XXIcentury is neoindustrialization on the basis of alternativestrategic goals of the global economy associated with the formation of post-industrial society and financialization neoindustrialization. A systematic proposal for the driving forces and mechanisms for its implementation is suggested. It is shown that target-oriented approach can be successfully used at the regional level as a mechanism for economic neoindustrialization of an old-industrial region. Conceptual approach to developing comprehensive program of industrial development in the industrial region that implements the ideas of neoindustrialization in relation to industry of Sverdlovsk region is presented. It was found that the regional technology platform can be an effective tool for combining the interests of territorial and sectoral development. It is proved that the idea of neoindustrialization can be realized only as a result of wise industrial policy and road map formation for the movement to an entirely new high-tech based industrial development. In the process of forming, the problem of neoindustrialization of a «pure» market as a factor in increasing the economic security is actualized.

Is Education Facing a "Tech Bubble"?

Science.gov (United States)

Davis, Michelle R.

2013-01-01

Educational technology companies and entrepreneurs may face the risk of a "tech bubble," similar to the massive boom-and-bust that rocked the technology market in the late 1990s, according to market analysts and a recently released paper. A relatively new focus on K-12 educational technology as an investment vehicle, a surge of investors looking…

A new model on the use of ubiquitous technology (U-Tech as a learning tool

Directory of Open Access Journals (Sweden)

Muliati Sedek

2014-08-01

Full Text Available Laptops, smartphones and tablets which also known as ubiquitous technology or u-tech have been widely used by students in the university. However, study on the factors influencing it usage as not many comprehensive studies have been done related to it. A review of related literature reveals that factors, namely the Technology Competency (TC, Performance Expectancy (PE, Effort Expectancy (EE, Behavioural Intention (BI, Facilitating Conditions (FC and Social Status (SS influence its usage. Thus, the focus of this study was to confirm whether the determined factors contribute towards u-tech usage among students in the institutions of higher learning, particularly in Malaysia. This study was based on a quantitative research in which the Structural Equation Modelling using AMOS was employed. The results attained from the analysis produced a reliable model towards u-tech usage. Therefore, it can be concluded that, u-tech usage described by the five factors. This study has suggested that the university administration should play an active role in disseminating any news that is related to the usefulness of u-tech.

Analýza sortimentu firmy SkyTech Corporation s.r.o.

OpenAIRE

Dvořáková, Šárka

2017-01-01

This thesis focuses on small company SkyTech Corporation s.r.o, which distributes products from the field of cosmetic, decorative cosmetic, cosmetic accessories and make-up brushes. The first part is theoretical and serves as basis for elaboration of the practical part. Theoretical part focus on marketing mix, competition, assortment and analysis connected with them. In practical part SkyTech Corporaton s.r.o. is introduced. Than follows the evaluation of individual brands and their roles in ...

FIRST OPERATING RESULTS OF A DYNAMIC GAS BEARING TURBINE IN AN INDUSTRIAL HYDROGEN LIQUEFIER

International Nuclear Information System (INIS)

Bischoff, S.; Decker, L.

2010-01-01

Hydrogen has been brought into focus of industry and public since fossil fuels are depleting and costs are increasing dramatically. Beside these issues new high-tech processes in the industry are in need for hydrogen at ultra pure quality. To achieve these requirements and for efficient transportation, hydrogen is liquefied in industrial plants. Linde Gas has commissioned a new 5.5 TPD Hydrogen liquefier in Leuna, Germany, which has been engineered and supplied by Linde Kryotechnik. One of the four expansion turbines installed in the liquefaction process is equipped with dynamic gas bearings. Several design features and operational characteristics of this application will be discussed. The presentation will include results of efficiency and operational reliability that have been determined from performance tests. The advantages of the Linde dynamic gas bearing turbine for future use in hydrogen liquefaction plants will be shown.

Psychosocial aspect of safe operation in Japanese nuclear power plants

International Nuclear Information System (INIS)

Kuroda, Isao

1988-01-01

It is not easy to reveal the reasons of safe operation of N.P.P. because many complicated factors are interrelated. However, to clarify the effective factors of the recent safe operation of Japanese N.P.P. is the important thema of research to continue this condition and the more improved level. At present, the follwing factors can be pointed out; 1) Influential safety policy of regulatory structures. 2) Enthusiastic and careful company policy on N.P.P. safety. 3) Close and stable relationship of the industries with companies on research, training and maintenance. 4) Collaborated safety research among scientific facilities, companies and manufacturers. 5) Good organization and management for N.P.P. personnel. 6) Well organized training program in company and training facilities. 7) Highly motivated N.P.P. personnel with high educational background. 8) Company atmosphere on N.P.P. safety. 9) Public opinion on nuclear power safety. (author)

Regulatory control for safe usage of radiation sources in India

International Nuclear Information System (INIS)

Ghosh, P.K.; Sonawane, A.U.

1998-01-01

The widespread applications of radioactive materials and radiation generating equipment in the field of industry, medicine agriculture and research in India necessitated the establishment of an efficient regulatory framework and consequently the Atomic Energy Regulatory Board (AERB) was constituted to exercise regulatory control over the safe usage of the radioactive materials and the radiation generating equipment. The Atomic Energy Act, 1962 and the Radiation Protection Rules, 1971 promulgated under the Act forms the basis of radiation safety in India and Chairman, AERB is the Competent Authority to enforce the regulatory provisions of the Radiation Protection Rules, 1971, for safe use of radiation source in the country. AERB has published a number of documents such as Radiation Surveillance Procedures, Standards, Codes, Guides and Manuals for safe use and handling of radioactive materials and radiation generating equipment. Apart from nuclear fuel cycle documents, these publications pertain to industrial radiography, medical application of radiation, transport of radioactive material, industrial gamma irradiators, X-ray units etc. AERB safety related publications are based on international standards e.g. BSS, IAEA, ICRP, ISO etc. This paper outlines the methodology of regulatory control exercised by AERB for safe use of the radioactive materials and the radiation generating equipment in the country. (author)

78 FR 57319 - Children's Online Privacy Protection Rule Safe Harbor Proposed Self-Regulatory Guidelines...

Science.gov (United States)

2013-09-18

...-AB20 Children's Online Privacy Protection Rule Safe Harbor Proposed Self-Regulatory Guidelines; kidSAFE... proposed self-regulatory guidelines submitted by the kidSAFE Seal Program (``kidSAFE''), owned and operated... enabling industry groups or others to submit to the Commission for approval self-regulatory guidelines that...

A new challenges in international cooperation. Via interdisciplinary approach towards safe nuclear industry back-end

International Nuclear Information System (INIS)

Dreimanis, Andrejs

2011-01-01

Development of multinational radioactive waste and spent nuclear fuel repositories requires safe nuclear industry back-end. We propose an interdisciplinary synergetic approach to multilevel consensus building for siting shared multinational repositories, based on self-organization, chaos and fuzziness concepts. An entire partnering country is considered as a higher-level stakeholder - the national stakeholder, being faced to simultaneous seeking an upward (international) and a downward (intra-national) consensus in the environment, being characterized by diverse political, economic and social interests. There is deduced: a) building of international stakeholder consensus could be promoted by activating the international scale multilateral interactions between intra- and international stakeholders, b) gradual progress in intergovernmental consensus and reaching multilateral agreements - the result of dialogue, via observing the whole set of various interests and common resolving of emerged controversies, and c) knowledge, mental flexibility and systems thinking - basic prerogatives for elevating the level of mutual understanding and consensus. (author)

The criteria of optimization of training specialists for the nuclear power industry and its implementation in the educational process

Science.gov (United States)

Lavrinenko, S. V.; Polikarpov, P. I.

2017-11-01

The nuclear industry is one of the most important and high-tech spheres of human activity in Russia. The main cause of accidents in the nuclear industry is the human factor. In this connection, the need to constantly analyze the system of training of specialists and its optimization in order to improve safety at nuclear industry enterprises. To do this, you must analyze the international experience in the field of training in the field of nuclear energy leading countries. Based on the analysis criteria have been formulated to optimize the educational process of training specialists for the nuclear power industry and test their effectiveness. The most effective and promising is the introduction of modern information technologies of training of students, such as real-time simulators, electronic educational resources, etc.

Executive brief to federal government 'the Canadian nuclear industry - a national asset'

International Nuclear Information System (INIS)

1985-03-01

Over a period of 40 years Canada has developed a remarkable nuclear industry. In keeping with our mining heritage, we are the world's leading uranium producer, with the highest grade orebodies in existence still waiting to be tapped. In the realm of high technology development, our CANDU reactor is second to none. Year after year Canadian CANDUs dominate the 'top 10' performance records world-wide. The nuclear industry has created direct employment for over 30,000 Canadians. The 'high tech' sectors of the industry are now vigorously seeking export markets for their products and services. As the world recovers from the recent prolonged recession, electricity demand is rising. Once again electricity is the engine of growth. Already utilities are planning to add new generating capacity. Canadian nuclear resources, technology and skilled people are proven and available. By seizing the opportunities which are opening up for us, a properly recognized nuclear industry can make a vital contribution to Canada's economic renewal. This brief has been prepared by the Canadian Nuclear Association (CNA) in response to the challenge issued to Canadians in Finance Minister Michael Wilson's document 'A New Direction for Canada'. This brief responds in terms of the major policy issues and opportunities as seen by the Canadian nuclear industry

Crash-Tech 2001. Conference; Crash-Tech 2001. Tagung

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

Improved active and passive safety of motor vehicles has resulted in a very much improved accident statistics. This conference discussed further optimisations in motor car safety. The harmonisation of test specifications world-wide was gone into, with particular interest in compatibility. Safety specifications resulting from current accident research and new legislation were gone into, and the current state of measuring and technology in crash testing was outlined. [German] Aufgrund der Verbesserungen in der aktiven und passiven Sicherheit von Fahrzeugen weisen die Unfallstatistiken in vielen europaeischen Laendern eine erfreuliche Tendenz auf. Die Tagung wird sich mit den Moeglichkeiten der weiteren Optimierung der Verkehrssicherheit befassen. Die 'Crash-Tech 2001' will sich mit dem Motto 'Sind wir auf dem Weg zum World NCAP?' der Harmonisierung der Testvorschriften unter Einbeziehung der Kompatibilitaet widmen. Dazu werden Anforderungen an die Fahrzeugsicherheit diskutiert, die sich sowohl aus der aktuellen Unfallforschung als auch aus den Vorschriften ergeben. Weiterhin wird der aktuelle Stand der Mess- und Versuchstechnik im Unfallversuch vorgestellt. (orig.)

Wood residue production and utilization research at Virgina Tech

Energy Technology Data Exchange (ETDEWEB)

Grace, L.A.; Stuart, W.B.; Sharp, J.C. (Virginia Polytechnic Inst. and State Univ., Blacksburg, VA (US)); Yu Jian-guo (Northeastern Forestry Univ., Harbin (CN))

1988-01-01

This paper describes the activities in crushing, drying and segregating wood residues currently underway at Virginia Tech. Experiments with high speed roll crushing as a means of reducing logging residues and small diameter stems to a form suitable for transportation and further processing appear promising. Deflecting whole tree chip streams across a double set of screens coupled with stripping transport air has been shown to reduce bark content and remove fines, bark and grit. Testing and refinement of two prototype sawdust driers is currently under way. Both driers offer increased opportunity for suspension burning and transport. (4 refs., 3 tabs., 3 figs.) (au).

Asian high tech streamlines traditional industry | CRDI - Centre de ...

International Development Research Centre (IDRC) Digital Library (Canada)

control systems and to make them affordable to small enterprises. Today, Eutech is a multinational provider of business services such as building management, workflow solutions, web publishing, and hospital information systems.

Material use and production changes in the U.S. wood pallet and container industry: 1992 to 2006

Science.gov (United States)

R. J. Bush; P. A. Araman

2009-01-01

A series of five studies conducted by the Virginia Tech Department of Wood Science and Forest Products, in collaboration with the USDA - Forest Service (Blacksburg, Virginia), have tracked activity in the U.S. wood pallet and container industry between 1992 and 2006. The studies documented trends in wood use and pallet production with in the industry, both new...

Racial and mental illness stereotypes and discrimination: an identity-based analysis of the Virginia Tech and Columbine shootings.

Science.gov (United States)

Chen, Charlene Y; Purdie-Vaughns, Valerie; Phelan, Jo C; Yu, Gary; Yang, Lawrence H

2015-04-01

The Virginia Tech and Columbine High shootings are 2 of the deadliest school massacres in the United States. The present study investigates in a nationally representative sample how White Americans' causal attributions of these shooting moderate their attitudes toward the shooter's race. White Americans shown a vignette based on the Virginia Tech shooting were more likely to espouse negative beliefs about Korean American men and distance themselves from this group the more they believed that the shooter's race caused the shooting. Among those who were shown a vignette based on the Columbine High shooting, believing that mental illness caused the shooting was associated with weaker negative beliefs about White American men. White Americans in a third condition who were given the Virginia Tech vignette and prompted to subtype the shooter according to his race were less likely to possess negative beliefs about Korean American men the more they believed that mental illness caused the shooting. There was no evidence for the ultimate attribution error. Theoretical accounts based on the stereotype and in-group-out-group bias literature are presented. The current findings have important implications for media depictions of minority group behavior and intergroup relations. (c) 2015 APA, all rights reserved).

WIRED NEXTFest invites Virginia Tech architecture students, professor to create archway entrance to the festival

OpenAIRE

Chadwick, Heather Riley

2008-01-01

An undergraduate student team from Virginia Tech's School of Architecture + Design in the College of Architecture and Urban Studies led by Terry Surjan, associate professor of architecture, is traveling to Chicago this month to erect and display an archway/pavilion entrance to WIRED magazine's highly acclaimed NEXTFest at Millennium Park.

Methodology сomparative statistical analysis of Russian industry based on cluster analysis

Directory of Open Access Journals (Sweden)

Sergey S. Shishulin

2017-01-01

Full Text Available The article is devoted to researching of the possibilities of applying multidimensional statistical analysis in the study of industrial production on the basis of comparing its growth rates and structure with other developed and developing countries of the world. The purpose of this article is to determine the optimal set of statistical methods and the results of their application to industrial production data, which would give the best access to the analysis of the result.Data includes such indicators as output, output, gross value added, the number of employed and other indicators of the system of national accounts and operational business statistics. The objects of observation are the industry of the countrys of the Customs Union, the United States, Japan and Erope in 2005-2015. As the research tool used as the simplest methods of transformation, graphical and tabular visualization of data, and methods of statistical analysis. In particular, based on a specialized software package (SPSS, the main components method, discriminant analysis, hierarchical methods of cluster analysis, Ward’s method and k-means were applied.The application of the method of principal components to the initial data makes it possible to substantially and effectively reduce the initial space of industrial production data. Thus, for example, in analyzing the structure of industrial production, the reduction was from fifteen industries to three basic, well-interpreted factors: the relatively extractive industries (with a low degree of processing, high-tech industries and consumer goods (medium-technology sectors. At the same time, as a result of comparison of the results of application of cluster analysis to the initial data and data obtained on the basis of the principal components method, it was established that clustering industrial production data on the basis of new factors significantly improves the results of clustering.As a result of analyzing the parameters of

Connecting Teachers and Ed-Tech Developers: Lessons from NYC's "Gap App" Program. Technical Appendices

Science.gov (United States)

Villavicencio, Adriana; Siman, Nina; Lafayette, Camille; Kang, David

2016-01-01

In 2011, with support from a federal Investing in Innovation grant, the NYC Department of Education launched Innovate NYC Schools. The initiative was designed to address two, related challenges to effectively integrating education technology (ed-tech) into classrooms: First, procurement of ed-tech tools is often hampered by a disconnect between…

'Experience the future of building technologies'. High tech, low energy

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

These proceedings cover the contributions presented at the CLIMA 2005 conference held in Lausanne, Switzerland. This four-day conference was sponsored by a large number of companies and organisations active in the Swiss building technologies area. Several keynote lectures were presented as were awards to students active in the building technical services area. The proceedings document the papers presented at the conference. These covered nine main topics. The first, 'Air-conditioning and ventilation' comprised 43 papers on the indoor environment, 15 on room air distribution, 4 on hygiene, 11 on alternative cooling methods, 8 on air-flow, 2 on air-cleaning and filters, 6 on refurbishment and even one concerning air-flow predictions in Egyptian tombs. The second topic, 'Heating', comprised 13 contributions on low-temperature heating and heat pumps, 7 on distributed energy systems, 4 on district heating, 7 on solar heating systems and 3 miscellaneous items. 'Design methods' were examined as a third topic with 11 contributions on building-simulation tools and 26 on computer-based methods for design, construction and operation. In the fourth section, 'Refrigeration', papers were presented on new working fluids (3 contributions), modernisation (5) along with 4 miscellaneous papers. 'Policies, standards and building-codes' were examined in four categories: Implementation of the European Energy Performance Directive with 8 contributions, life-cycle costs with 2 papers, energy conservation with 15 contributions and 2 contributions in the miscellaneous category. 'Domestic water systems and sanitary technology', the sixth section, includes 3 contributions on water conservation. Section 7, 'Building automation, security and control' includes a section on information and communication systems (3 contributions) and 6 various papers. Section 8, 'Building physics and HVAC' includes 8 contributions on double-skin and high-tech building envelopes, 7 on moisture control, and one on

Maximizing Employment Outcomes through the Use of "Lower-Tech" Assistive Technology & Rehabilitation Engineering.

Science.gov (United States)

Grott, Ray

2015-01-01

For many people with disabilities, Assistive Technology tools and Rehabilitation Engineering principles are key to successful employment outcomes. At the same time, employers and service providers are often under the impression that accommodations and AT solutions require high-tech, complicated, and expensive technologies. This paper discusses how creative problem solving and a "keep it simple" mindset can result in very functional low-cost solutions.

Raising Generation Tech Preparing Your Children for a Media-Fueled World

CERN Document Server

Taylor, Jim

2012-01-01

Today's children are being raised as 'digital natives' in a world dominated by popular culture and technology. TV shows, computers, video games, social networking sites, advertisements, and cell phones too often have an unnecessarily strong-and negative? influence on children.  But pulling the plug just isn't an option in a world where being connected is essential for success. In Raising Generation Tech,  noted parenting and new-media expert Dr. Jim Taylor explores how popular culture and technology shape children's lives. The essential message from Raising Generation Tech is that excessive

Safe transport of radioactive material

International Nuclear Information System (INIS)

1994-01-01

Delivering radioactive material to where it is needed is a vital service to industry and medicine. Millions of packages are shipped all over the world by all modes of transport. The shipments pass through public places and must meet stringent safety requirements. This video explains how radioactive material is safely transported and describes the rules that carriers and handlers must follow

Rapid Prototyping High-Performance MR Safe Pneumatic Stepper Motors

NARCIS (Netherlands)

Groenhuis, Vincent; Stramigioli, Stefano

2018-01-01

In this paper we show that pneumatic stepper motors for MR safe robots can be constructed using rapid prototyping techniques such as 3-D printing and laser-cutting. The designs are lightweight, completely metal-free and fully customizable. Besides MR safe robotic systems, other potential

Feasibility study for an innovative industrial red mud utilisation method.

Science.gov (United States)

Kounalakis, Petros; Aravossis, Konstantinos; Karayianni, ChS

2016-02-01

Red mud is a high volume industrial waste, and its management poses a unique challenge. For the utilisation of red mud, an economical, energy saving, environmental friendly and widely applicable method has been found. The proposed novel method is purely chemical, and achieves the recovery of all the oxides contained in red mud totally and transforms them into high value added products. The present work shows that an investment in an industrial plant, treating red mud and turning a toxic industrial waste in commercial products, is safe and viable. © The Author(s) 2015.

Future Assets, Student Talent (FAST)

Science.gov (United States)

1992-01-01

Future Assets, Student Talent (FAST) motivates and prepares talented students with disabilities to further their education and achieve High Tech and professional employment. The FAST program is managed by local professionals, business, and industry leaders; it is modeled after High School High Tech project TAKE CHARGE started in Los Angeles in 1983. Through cooperative efforts of Alabama Department of Education, Vocational Rehabilitation, Adult and Children Services, and the President's Committee on Employment of People with Disabilities, north central Alabama was chosen as the second site for a High School High Tech project. In 1986 local business, industry, education, government agencies, and rehabilitation representatives started FAST. The program objectives and goals, results and accomplishments, and survey results are included.

Sieciowe usługi informacyjne dla nauk technicznych : BazTech, BazTOL

OpenAIRE

Derfert-Wolf, Lidia

2007-01-01

The paper presents the current state and plans for development of the BazTech "Polish Technical Journals Contents" database. It is created by 22 academic libraries and centers for scientific information. The project is coordinated by the Cracow University of Technology. The Baz Tech database, situated at http://baztech.icm.edu.pl (ICM UW server), within the framework of the project "Virtual Scientific Library" lists over 400 journals. The paper also describes the assumptions for the creation ...

The High-Tech Surge. Focus on Careers.

Science.gov (United States)

Vo, Chuong-Dai Hong

1996-01-01

The computer industry is growing at a phenomenal rate as technology advances and prices fall, stimulating unprecedented demand from business, government, and individuals. Higher levels of education will be the key to securing employment as organizations increasingly rely on sophisticated technology. (Author)

Urban Tech on the Rise: Machine Learning Disrupts the Real Estate Industry

OpenAIRE

Chaillou, Stanislas; Fink, Daniel; Gonçalves, Pamella

2018-01-01

The practice of AI-powered Urban Analytics is taking off within the real estate industry. Data science and algorithmic logic are close to the forefront of new urban development practices. How close? is the question — experts predict that digitization will go far beyond intelligent building management systems. New analytical tools with predictive capabilities will dramatically affect the future of urban development, reshaping the real estate industry in the process.

The human factor in high-tech plant operation

Energy Technology Data Exchange (ETDEWEB)

Grassani, E

1988-02-01

The article develops a series of considerations on reliability standards applied to operators of technologically complex industrial installations. From research conducted within the field of cognitive psychology, significant indications are emerging relative to professional training within industry, as well as to the functional and human interface characteristics of automated control systems. Recent tragic incidents (Three Mile Island nuclear power plant, Bopal methyl isocynate storage, Mexico City petroleum tank farm and Chernobylsk-4 reactor) have evidenced the greater weight that should be given to human factors in plant safety and reliability assessments and planning.

Inherently safe in situ uranium recovery

International Nuclear Information System (INIS)

Krumhansl, James Lee; Beauheim, Richard Louis; Brady, Patrick Vane; Arnold, Bill Walter; Kanney, Joseph F.; McKenna, Sean Andrew

2009-01-01

Expansion of uranium mining in the United States is a concern to some environmental groups and sovereign Native American Nations. An approach which may alleviate some problems is to develop inherently safe in situ uranium recovery ('ISR') technologies. Current ISR technology relies on chemical extraction of trace levels of uranium from aquifers that, once mined, can still contain dissolved uranium and other trace metals that are a health concern. Existing ISR operations are few in number; however, high uranium prices are driving the industry to consider expanding operations nation-wide. Environmental concerns and enforcement of the new 30 ppb uranium drinking water standard may make opening new mining operations more difficult and costly. Here we propose a technological fix: the development of inherently safe in situ recovery (ISISR) methods. The four central features of an ISISR approach are: (1) New 'green' leachants that break down predictably in the subsurface, leaving uranium, and associated trace metals, in an immobile form; (2) Post-leachant uranium/metals-immobilizing washes that provide a backup decontamination process; (3) An optimized well-field design that increases uranium recovery efficiency and minimizes excursions of contaminated water; and (4) A combined hydrologic/geochemical protocol for designing low-cost post-extraction long-term monitoring. ISISR would bring larger amounts of uranium to the surface, leave fewer toxic metals in the aquifer, and cost less to monitor safely - thus providing a 'win-win-win' solution to all stakeholders.

Virginia Tech's Cook Counseling Center receives international counseling accreditation

OpenAIRE

DeLauder, Rachel

2010-01-01

The Virginia Tech Thomas E. Cook Counseling Center has been accredited by the International Association of Counseling Services, Inc., an organization of United States, Canadian, and Australian counseling agencies based in Alexandria, Va.

ECO TECH LINK: PT3 Grant Builds Technology Circles in the K-18 Community.

Science.gov (United States)

Klinger, Katie; Duckett, Jane; Medrano, Maria; Crow, Nedra; Stowers, Gwen

Through the vehicle of the PT3 grant program, ECO TECH LINK has built a strong consortium to support technology circles of government, education and business in order to raise student achievement scores, shorten the time it takes to earn a teaching credential, and enhance the quality of teacher credential courses. The ECO TECH LINK grant enables…

FinTech Market Development Perspectives

OpenAIRE

Kalmykova, Ekaterina Yurievna; Ryabova, Anna

2016-01-01

Fast development of technologies has led to emergence of the new market – FinTech – which is very attractive for investors today. By now this market has a great number of different concepts: P2P-crediting, E-wallets, Bitcoins, mPOS-acquiring, T-commerce, mobile banks, etc. Many of these tools have already heavily entered our ordinary life. People can obtain any credits through special services on the Internet from other users without participation of banks, pay by credit card using mobile dev...

Radioactive waste management in the VS military nuclear industry

International Nuclear Information System (INIS)

Kobal'chuk, O.V.; Kruglov, A.K.; Sokolova, I.D.; Smirnov, Yu.V.

1989-01-01

Organization and plans of radioactive waste management in the US military nuclear industry, determining transition from the policy of temporal waste storage to their final and safe disposal are presented. Programs of long-term management of high-level, transuranium and low-level wastes, the problems of the work financing and the structure of management activities related to the radioactive waste processing military nuclear industry enterprises are considered

Distribution of volatile organic compounds over a semiconductor Industrial Park in Taiwan.

Science.gov (United States)

Chiu, Kong-Hwa; Wu, Ben-Zen; Chang, Chih-Chung; Sree, Usha; Lo, Jiunn-Guang

2005-02-15

This study examined volatile organic compounds (VOC) concentration in ambient air collected during the years 2000--2003 at several different locations of Hsinchu Science-based Industrial Park (HSIP) in Taiwan. A canister automated GC-MS system analyzed the volatile organics in ambient air grasp samples according to T0-15 method. Oxygenated volatiles were the most abundant VOC detected in HSIP followed by aromatics that are commonly used as solvents in the semiconductor industries. The major components measured in the ambient air are 2-propanol (29-135 ppbv), acetone (12-164 ppbv), benzene (0.7-1.7 ppbv), and toluene (13-20 ppbv). At some of the sampling locations, odorous compounds such as carbon disulfide and dimethyl sulfide levels exceed threshold values. The estimated toluene/benzene ratio is very high at most of the sites. However, the total amount of VOC is reduced over the years from 2000 to 2003 due to strict implementation on use and discharge of solvents in industries. There exists no definite seasonal pattern for sporadic occurrence of high levels of some of the volatile organics. Stagnant weather conditions with low wind speeds aid accumulation of toxic species at ground level. The results entail that hi-tech semiconductor industries are still a potential source for harmful organic substances to surrounding microenvironment.

International banker to speak at Virginia Tech

OpenAIRE

Ho, Sookhan

2004-01-01

International banker David Bieri will give a talk, "Why Central Banks Manage Reserves," on Monday, April 5, 11 a.m. in 1045 Pamplin Hall on the Virginia Tech campus. His talk is part of the "International Business and Culture" guest lecture series sponsored by the Pamplin College of Business. The talk is free and open to the public.

Coaxial wet-spun yarn supercapacitors for high-energy density and safe wearable electronics

Science.gov (United States)

Kou, Liang; Huang, Tieqi; Zheng, Bingna; Han, Yi; Zhao, Xiaoli; Gopalsamy, Karthikeyan; Sun, Haiyan; Gao, Chao

2014-01-01

Yarn supercapacitors have great potential in future portable and wearable electronics because of their tiny volume, flexibility and weavability. However, low-energy density limits their development in the area of wearable high-energy density devices. How to enhance their energy densities while retaining their high-power densities is a critical challenge for yarn supercapacitor development. Here we propose a coaxial wet-spinning assembly approach to continuously spin polyelectrolyte-wrapped graphene/carbon nanotube core-sheath fibres, which are used directly as safe electrodes to assembly two-ply yarn supercapacitors. The yarn supercapacitors using liquid and solid electrolytes show ultra-high capacitances of 269 and 177 mF cm−2 and energy densities of 5.91 and 3.84 μWh cm−2, respectively. A cloth supercapacitor superior to commercial capacitor is further interwoven from two individual 40-cm-long coaxial fibres. The combination of scalable coaxial wet-spinning technology and excellent performance of yarn supercapacitors paves the way to wearable and safe electronics. PMID:24786366

Coaxial wet-spun yarn supercapacitors for high-energy density and safe wearable electronics

Science.gov (United States)

Kou, Liang; Huang, Tieqi; Zheng, Bingna; Han, Yi; Zhao, Xiaoli; Gopalsamy, Karthikeyan; Sun, Haiyan; Gao, Chao

2014-05-01

Yarn supercapacitors have great potential in future portable and wearable electronics because of their tiny volume, flexibility and weavability. However, low-energy density limits their development in the area of wearable high-energy density devices. How to enhance their energy densities while retaining their high-power densities is a critical challenge for yarn supercapacitor development. Here we propose a coaxial wet-spinning assembly approach to continuously spin polyelectrolyte-wrapped graphene/carbon nanotube core-sheath fibres, which are used directly as safe electrodes to assembly two-ply yarn supercapacitors. The yarn supercapacitors using liquid and solid electrolytes show ultra-high capacitances of 269 and 177 mF cm-2 and energy densities of 5.91 and 3.84 μWh cm-2, respectively. A cloth supercapacitor superior to commercial capacitor is further interwoven from two individual 40-cm-long coaxial fibres. The combination of scalable coaxial wet-spinning technology and excellent performance of yarn supercapacitors paves the way to wearable and safe electronics.

Industrialization of Superconducting RF Accelerator Technology

Science.gov (United States)

Peiniger, Michael; Pekeler, Michael; Vogel, Hanspeter

2012-01-01

Superconducting RF (SRF) accelerator technology has basically existed for 50 years. It took about 20 years to conduct basic R&D and prototyping at universities and international institutes before the first superconducting accelerators were built, with industry supplying complete accelerator cavities. In parallel, the design of large scale accelerators using SRF was done worldwide. In order to build those accelerators, industry has been involved for 30 years in building the required cavities and/or accelerator modules in time and budget. To enable industry to supply these high tech components, technology transfer was made from the laboratories in the following three regions: the Americas, Asia and Europe. As will be shown, the manufacture of the SRF cavities is normally accomplished in industry whereas the cavity testing and module assembly are not performed in industry in most cases, yet. The story of industrialization is so far a story of customized projects. Therefore a real SRF accelerator product is not yet available in this market. License agreements and technology transfer between leading SRF laboratories and industry is a powerful tool for enabling industry to manufacture SRF components or turnkey superconducting accelerator modules for other laboratories and users with few or no capabilities in SRF technology. Despite all this, the SRF accelerator market today is still a small market. The manufacture and preparation of the components require a range of specialized knowledge, as well as complex and expensive manufacturing installations like for high precision machining, electron beam welding, chemical surface preparation and class ISO4 clean room assembly. Today, the involved industry in the US and Europe comprises medium-sized companies. In Japan, some big enterprises are involved. So far, roughly 2500 SRF cavities have been built by or ordered from industry worldwide. Another substantial step might come from the International Linear Collider (ILC) project

The "Virtual" Reality of High-Tech Training

Science.gov (United States)

Justice, Jamie

2004-01-01

Community and technical colleges are at a crossroads in their history and mission in preparing individuals for the challenges of lifelong learning and the workforce of the future. Many industries are faced with the challenges of replacing an aging and retiring workforce, updating employee skill sets, and maintaining quality and production…

Interdisciplinary Program For In-Service Teachers; Working with Industry And University to Enhance Learning Experiences in the State of Ohio (Invited Paper

Directory of Open Access Journals (Sweden)

Suzanne Lunsford

2014-12-01

Full Text Available Science Teaching for Ohio's New Economy (STONE is an interdisciplinary professional development program that inservice teachers grades K-12 that experience the integration of earth and physical science in an inquiry-based field. There are various field trips to various industrial settings that teach how geoscientist works in the aggregate industry. During the academic year there is a support system where the industry and the in-service teachers engage their students into real world industrial applications in the aggregate industry. This paper will discuss the utilization of high – tech instrumentation such as X-Ray Fluorescence and Scanning Electron Microscopy to teach real-world science applications of concern. Pre- and Post-test assessments as addressed by R.R. Hake have shown that these inquirybased professional development workshops that integrated academia with industry as a positive outcome for our students in Ohio.

Longitudinal analysis of high-technology medical services and hospital financial performance.

Science.gov (United States)

Zengul, Ferhat D; Weech-Maldonado, Robert; Ozaydin, Bunyamin; Patrician, Patricia A; OʼConnor, Stephen J

U.S. hospitals have been investing in high-technology medical services as a strategy to improve financial performance. Despite the interest in high-tech medical services, there is not much information available about the impact of high-tech services on financial performance. The aim of this study was to examine the impact of high-tech medical services on financial performance of U.S. hospitals by using the resource-based view of the firm as a conceptual framework. Fixed-effects regressions with 2 years lagged independent variables using a longitudinal panel sample of 3,268 hospitals (2005-2010). It was hypothesized that hospitals with rare or large numbers (breadth) of high-tech medical services will experience better financial performance. Fixed effects regression results supported the link between a larger breadth of high-tech services and total margin, but only among not-for-profit hospitals. Both breadth and rareness of high-tech services were associated with high total margin among not-for-profit hospitals. Neither breadth nor rareness of high-tech services was associated with operating margin. Although breadth and rareness of high-tech services resulted in lower expenses per inpatient day among not-for-profit hospitals, these lower costs were offset by lower revenues per inpatient day. Enhancing the breadth of high-tech services may be a legitimate organizational strategy to improve financial performance, especially among not-for-profit hospitals. Hospitals may experience increased productivity and efficiency, and therefore lower inpatient operating costs, as a result of newer technologies. However, the negative impact on operating revenue should caution hospital administrators about revenue reducing features of these technologies, which may be related to the payer mix that these technologies may attract. Therefore, managers should consider both the cost and revenue implications of these technologies.

Intrinsically Safe and Economical Reactor (ISER)

International Nuclear Information System (INIS)

Wakabayashi, Hiroaki; Asahi, Yoshiro

1991-01-01

The Intrinsically Safe and Economical Reactor (ISER) is designed based on the principle of a process inherent ultimate safe reactor, PIUS, a so-called inherently safe reactor (ISR). ISER has been developed joingly by the members of the Kanagawa Institute of Technology, the University of Tokyo, the Japan Atomic Energy Research Institute (JAERI) and several industrial firms in Japan. This paper describes the requirements for the next generation of power reactor, the safety design philosphy of ISR and ISER, the controllability of ISER and the results of analyses of some of the design-based accidents (DBA) of ISER, namely station blackout, accidents in which the pressurizer relief valve becomes jammed and stuck in open position and tube breaks in the steam generator. It is concluded that the ISER can ensure a wide range of contraollabitily and fuel integrity for all the analysed DBAs. (orig.)

Practice of radiation dose control for tech-modification items in Qinshan Nuclear Power Plant

International Nuclear Information System (INIS)

Zhang Yong; Chen Zhongyu; Xu Hongming; Fan Liguang; Jiang Jianqi; Bu Weidong

2006-01-01

In order to improve the safety and reliability of nuclear power plant operation, many tech-modifications related to system or equipment have been completed since operation in Qinshan NPP. this paper introduces radiation dose control for mainly tech-modifications items related to radiation, including radiation protection optimization measures and experience in aspects of item planning, program writing, process control, etc. (authors)

Innovation dynamics of Salvadoran agri-food industry from an evolutionary perspective

Energy Technology Data Exchange (ETDEWEB)

Peraza Castaneda, E.H.; Aleixandre Mendizábal, G.

2016-07-01

This paper presents a holistic approach to analyse the dynamics of innovation of a low-tech sector in a less developed economy, the agri-food industry in El Salvador, in the context of evolutionary economy. This requires using complementary quantitative and qualitative data and methodologies to better understand how Salvadoran agri-food industry innovation system works and how STI public policies can improve the performance of a key sector in terms of national socioeconomic development. The work already done shows a concentrated and vigorous sector with some upstream and downstream connections that innovate depending on firm size, age, R&D activities and use of industrial property rights. (Author)

Virginia Tech dining keeps customer service fresh (with Relish!)

OpenAIRE

Chadwick, Heather Riley

2005-01-01

Virginia Tech is consistently ranked among the top universities in providing its students with the very best in dining options. One important way they make that happen is keeping in touch with student preferences and needs.

Nuclear industry and production of energy: arguments for a discussion

International Nuclear Information System (INIS)

Sorin, F.

2004-01-01

This article reviews the advantages of nuclear energy (nuclear energy increases the energy autonomy of France, provides cheap energy, does not generate greenhouse effect gases and concerns an exporting high-tech industry that generates qualified jobs and added-value to French industry) and highlights its ability to fill the gap before renewable energies are efficient and reliable to produce large amounts of electric power and to face the present and future challenges like the progressive running dry of fossil energy sources or the compliance with the Kyoto agreement. The 2 controversial issues: the consequences of a terrorist attack on a nuclear facility and what to do with radioactive wastes are for the first one exaggerated in public opinion (some figures and facts concerning the resistance of the concrete containment that encloses a PWR type reactor are given in this article) and for the second the disposal in deep underground storage sites appears to be a solution. (A.C.)

NEDO project reports. High performance industrial furnace development project - High temperature air combustion

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-21

For the purpose of reducing energy consumption, a NEDO project 'Developmental research on high efficiency industrial furnaces' was carried out from FY 1993 to FY 1999 by The Japan Industrial Furnaces Manufacturers Association, and the paper outlined the details of the project. Industrial furnaces handled in this R and D can bring 30% reduction of the energy consumption and approximately 50% NOx reduction, and were given the 9th Nikkei global environmental technology prize. In the study of combustion phenomena of high temperature air combustion, the paper arranged characteristics of flame, the base of gaseous fuel flame, the base of liquid fuel flame, the base of solid fuel flame, etc. Concerning high temperature air combustion models for simulation, fluid dynamics and heat transfer models, and reaction and NOx models, etc. As to impacts of high temperature air combustion on performance of industrial furnaces, energy conservation, lowering of pollution, etc. In relation to a guide for the design of high efficiency industrial furnaces, flow charts, conceptual design, evaluation method for heat balance and efficiency using charts, combustion control system, applicability of high efficiency industrial furnaces, etc. (NEDO)

NEDO project reports. High performance industrial furnace development project - High temperature air combustion

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-21

For the purpose of reducing energy consumption, a NEDO project 'Developmental research on high efficiency industrial furnaces' was carried out from FY 1993 to FY 1999 by The Japan Industrial Furnaces Manufacturers Association, and the paper outlined the details of the project. Industrial furnaces handled in this R and D can bring 30% reduction of the energy consumption and approximately 50% NOx reduction, and were given the 9th Nikkei global environmental technology prize. In the study of combustion phenomena of high temperature air combustion, the paper arranged characteristics of flame, the base of gaseous fuel flame, the base of liquid fuel flame, the base of solid fuel flame, etc. Concerning high temperature air combustion models for simulation, fluid dynamics and heat transfer models, and reaction and NOx models, etc. As to impacts of high temperature air combustion on performance of industrial furnaces, energy conservation, lowering of pollution, etc. In relation to a guide for the design of high efficiency industrial furnaces, flow charts, conceptual design, evaluation method for heat balance and efficiency using charts, combustion control system, applicability of high efficiency industrial furnaces, etc. (NEDO)

PREFACE: 3rd International Conference on Science & Engineering in Mathematics, Chemistry and Physics 2015 (ScieTech 2015)

Science.gov (United States)

Gaol, F. L.

2015-06-01

The 3rd International Conference on Science & Engineering in Mathematics, Chemistry and Physics 2015 (ScieTech 2015), was held at The Westin Resort Nusa Dua, Bali on 31 January - 1 February 2015. The ScieTech 2015 conference is aimed to bring together researchers, engineers and scientists from around the world. ScieTech 2015 is placed on promoting interaction between the theoretical, experimental, and applied communities, so that a high level exchange is achieved in new and emerging areas within mathematics, chemistry and physics. As we already know that science and technology have brought tremendous benefits for human civilization. People are becoming healthier, wealthier, better educated, more peaceful, increasingly connected, and living longer. Of course, science and technology provide many answers to global challenges, but we will face more complex problems in the next decade due to increasing world population, limitation of energy, and climate change. Therefore, researchers should be more active in conducting research that enables collaboration between one and the others. Interdisciplinary cooperation is absolutely necessary in order to create a smart system for solving the global problems. We need a global and general long-term view of the future with long-range goals for solving complex problems in next decade. Therefore the conference was held to be a forum for researchers from different disciplines to start collaborating and conducting research that provides a solution to the global issues. The theme of ScieTech 2015 was ''The interdisciplinary Application between Mathematics, Chemistry and Physics to enhance the Quality of Life''. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting conference program as well as the invited and plenary speakers. This year, we received 197 papers and after rigorous review, 59 papers were accepted. The participants came from 19

The effects of trends in technology on the hotel industry: a case study of Scandic Hotel Simonkenttä and Hilton Hotel Kalastajatorppa

OpenAIRE

Tamang, Surya Maya; Bernaldo, Ruth Jane

2016-01-01

The hotel industry continues to develop through innovations of technology. Trends in technol-ogy are evident in various forms, such as software and operating systems, high-tech devices and equipment, and social media networks. These can improve a hotel’s competitive ad-vantage and increase customer satisfaction. The objective of this research project was to examine the effects of technological trends in hotels and as perceived by the employees (the technology users) and to find out if ther...

EDITORIAL: Special issue featuring articles arising from the 11th High-Tech Plasma Processes Conference Special issue featuring articles arising from the 11th High-Tech Plasma Processes Conference

Science.gov (United States)

Bruggeman, Peter; Degrez, Gérard; Delplancke, Marie-Paule; Gleizes, Alain

2011-05-01

The 11th High-Tech Plasma Processes Conference (HTPP) was held in Brussels, Belgium, 27 June-2 July, 2010. HTPP started as a thermal plasma conference and gradually expanded to include low-temperature plasmas. The conference was founded by Jacques Amouroux and Pierre Fauchais, and aims to bring together different scientific communities to facilitate contacts between science, technology and industry, providing a platform for the exploration of elementary processes and applications in and by plasmas. The first HTPP was held in Odeillo, France, in 1990. Since then it has been held every other year in different European cities: Paris, Aachen, Athens, Strasbourg, Saint-Petersburg, Patras and Brussels. The 11th HTPP conference was attended by 125 participants from 19 countries. The program involved 14 invited talks, 34 contributed talks, 72 posters and a software demonstration and hands-on session for plasma modelling. The 12th HTPP conference will be held 24-28 June 2012, in Bologna, Italy. A larger part of the contributions to the 11th HTPP has been published in the Journal of Physics: Conference Series (JPCS) volume 275, 2011. All invited speakers and other contributors, as selected by the Steering, Scientific and Organizing Committee, were invited to submit a paper based on their contributions for this special issue which is peer reviewed by the journal. Both this special issue and the JPCS volume aim to bring the 11th HTPP to a wider audience. The publications are a nice example of the broad topic range of the conference. The JPCS volume contains papers covering fundamental aspects on radiative processes of thermal plasmas, modelling of thermal arcs and non-thermal RF plasma jets, plasma diagnostics including flow and heat flux measurements of thermal plasmas, radical density measurements and laser-induced breakdown spectroscopy. The applications-oriented contributions of the JPCS volume include plasma spraying, synthesis of (nano-sized) materials, surface

Innovation in natural resources : New opportunities and new challenges. The case of the Argentinean seed industry

NARCIS (Netherlands)

Marin, A.; Stubrin, L.I.

2015-01-01

In this paper, using the case of seeds, we explore the existence of both new opportunities and new challenges for innovation in Natural Resource Based Industries (NRBIs) in developing countries. Conventional views construe NRBIs as low tech, with low technological dynamism, little innovation, and

The measurement of customer service quality as a competitive strategy in an industrial environment

OpenAIRE

2012-01-01

M.Tech. This study deals with the measurement of customer service quality in an industrial environment. The concept was to measure service quality and then develop a competitive strategy based on this. The mechanism used is the SERVQUAL model. Subsequently reengineering aspects of customer service based on the findings is proposed as a competitive advantage. The study is diagnostic in nature offering insights on the application of a well researched service quality model in an industrial en...

Brokerage in SME networks

NARCIS (Netherlands)

Kirkels, Y.E.M.; Duysters, G.M.

2010-01-01

This study focuses on SME networks of design and high-tech companies in Southeast Netherlands. By highlighting the personal networks of members across design and high-tech industries, the study attempts to identify the main brokers in this dynamic environment. In addition, we investigate whether

Plastic Technology (Production). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

Science.gov (United States)

Claus, Robert; And Others

This course guide for a plastic technology course is one of four developed for the production area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--energy/power and graphic communications.) Part 1 provides such introductory information as a definition and…

An example of technological transfer to industry: the 'IMI' project

International Nuclear Information System (INIS)

Stefanini, A.; Amendolia, S.R.; Annovazzi, A.; Baldelli, P.; Bigongiari, A.; Bisogni, M.G.; Catarsi, F.; Cetronio, A.; Chianella, M.; Cinti, M.N.; Delogu, P.; Fantacci, M.E.; Galimberti, D.; Gambaccini, M.; Gilardoni, C.; Iurlaro, G.; Lanzieri, C.; Meoni, M.; Novelli, M.; Pani, R.; Passuello, G.; Pellegrini, R.; Pieracci, M.; Quattrocchi, M.; Rosso, V.; Venturelli, L.

2004-01-01

Several INFN Sections and Departments of Physics of Italian Universities have spent many man-years in the attempt to adapt detector and read-out technologies, originally developed in the field of High Energy Physics, to the domain of biomedical apparatuses. The research covered such areas as the exploitation of crystals for the production of monochromatic X-ray beams, the development of devices for efficient X-ray detection, the design of advanced VLSI electronics, the improvement of Position Sensitive Photomultiplier Tubes and crystals for Nuclear Medicine gamma-cameras. These studies have been integrated in the Integrated Mammographic Imaging (IMI) project, funded by the Italian Government through the law 46/82 (art.10) and is carried on by five high-technology industries in Italy, namely LABEN, CAEN, AMS, GILARDONI and POL.HI.TECH. We report on the status of this technological transfer project

Perancangan Fasilitas Kerja yang Ergonomis pada Proses Pelarutan Printed Circuit Board (PCB dengan Menggunakan Metode Quality Function Deployment (Studi kasus di IK-Tech

Directory of Open Access Journals (Sweden)

Adhi Susatyo

2017-11-01

Full Text Available IK-Tech merupakan home industry  yang bergerak dalam pembuatan PCB. Proses produksi di IK-Tech masih dengan proses manual, terutama pada proses pelarutan PCB (proses Etching. Proses Etching di IK-Tech tumpah, proses yang lama dan penggunaan yang tidak ergonomis karena operator bekerja dengan menggunakan alat yang seadanya berupa nampan, sehingga dalam proses pelarutan, terdapat banyak kekurangan seperti pelarut mudah posisi jongkok membungkuk. Gerakan kerja yang berulang-ulang dengan frekuensi yang sering, mengakibatkan operator tidak nyaman dalam bekerja dan mudah lelah. Oleh karena itu, perlu dilakukan perbaikan dalam proses Etching yaitu merancang fasilitas kerja.       Pada penelitian ini, dirancang fasilitas kerja dengan pendekatan Quality Function Deployment. Metode ini bertujuan mengakomodasi perancangan fasilitas kerja berdasakan kebutuhan pengguna. Selain itu, pendekatan ergonomis pada perancangan fasilitas kerja untuk memperkecil beban kerja operator sehingga menciptakan rasa nyaman dan aman bagi operator dalam bekerja.        Berdasarkan hasil analisis dan pengolahan data, enumeration persentase keluhan operator sebelum perancangan sebesar 7% keluhan sakit, setelah perancangan turun menjadi 0% (tidak ada keluhan sakit. Rekapitulasi waktu pelarutan sebelum perancangan sebesar 22,66 menit/unit, waktu pelarutan setelah perancangan (penggunaan manual sebesar 13,66 menit/unit dan waktu pelarutan setelah perancangan (penggunaan otomatis sebesar 11,37 menit/unit. Dari rekap waktu pelarutan, diketahui penurunan waktu pelarutan sebelum dan setelah perancangan (penggunaan manual sebesar 39,72 %, penurunan waktu pelarutan sebelum dan setelah perancangan (penggunaan otomatis sebesar 49,82 %.

Comparative analysis of automation of production process with industrial robots in Asia/Australia and Europe

Directory of Open Access Journals (Sweden)

I. Karabegović

2017-01-01

Full Text Available The term "INDUSTRY 4.0" or "fourth industrial revolution" was first introduced at the fair in 2011 in Hannover. It comes from the high-tech strategy of the German Federal Government that promotes automation-computerization to complete smart automation, meaning the introduction of a method of self-automation, self-configuration, self-diagnosing and fixing the problem, knowledge and intelligent decision-making. Any automation, including smart, cannot be imagined without industrial robots. Along with the fourth industrial revolution, ‘’robotic revolution’’ is taking place in Japan. Robotic revolution refers to the development and research of robotic technology with the aim of using robots in all production processes, and the use of robots in real life, to be of service to a man in daily life. Knowing these facts, an analysis was conducted of the representation of industrial robots in the production processes on the two continents of Europe and Asia /Australia, as well as research that industry is ready for the introduction of intelligent automation with the goal of establishing future smart factories. The paper gives a representation of the automation of production processes in Europe and Asia/Australia, with predictions for the future.

FAR-TECH's Nanoparticle Plasma Jet System and its Application to Disruptions, Deep Fueling, and Diagnostics

Science.gov (United States)

Thompson, J. R.; Bogatu, I. N.; Galkin, S. A.; Kim, J. S.

2012-10-01

Hyper-velocity plasma jets have potential applications in tokamaks for disruption mitigation, deep fueling and diagnostics. Pulsed power based solid-state sources and plasma accelerators offer advantages of rapid response and mass delivery at high velocities. Fast response is critical for some disruption mitigation scenario needs, while high velocity is especially important for penetration into tokamak plasma and its confining magnetic field, as in the case of deep fueling. FAR-TECH is developing the capability of producing large-mass hyper-velocity plasma jets. The prototype solid-state source has produced: 1) >8.4 mg of H2 gas only, and 2) >25 mg of H2 and >180 mg of C60 in a H2/C60 gas mixture. Using a coaxial plasma gun coupled to the source, we have successfully demonstrated the acceleration of composite H/C60 plasma jets, with momentum as high as 0.6 g.km/s, and containing an estimated C60 mass of ˜75 mg. We present the status of FAR-TECH's nanoparticle plasma jet system and discuss its application to disruptions, deep fueling, and diagnostics. A new TiH2/C60 solid-state source capable of generating significantly higher quantities of H2 and C60 in <0.5 ms will be discussed.

Interdisciplinarity in Tech Startups Development – Case Study of ‘Unistartapp’ Project

Directory of Open Access Journals (Sweden)

Kopera Sebastian

2018-03-01

Full Text Available Empirical data as well as scientific reports confirm that startups require diverse, in-house competencies in order to achieve market success. However, while technology-related competencies are usually brought to new tech ventures by their founders, there is a significant deficiency of market- and management-related competencies, which is reflected in the statistics of common startup failure reasons. In this context, a question arises: how interdisciplinarity of knowledge and competencies can be built into the very core of tech startups? The text addresses this question by zeroing in on the role of universities in this process. In the first part, the specificity of tech startups is analyzed. The next chapter overviews the hitherto academy-related startup education environment together with its shortcomings as far as interdisciplinarity is concerned. Finally, the case study of innovative and interdisciplinary academic ecosystem, which was built and tested within the project UniStartApp, is presented and discussed together with related lessons learned. The text is concluded with final remarks on challenges involved in embedding interdisciplinarity into startup education ecosystem.

High Pressure Industrial Water Facility

Science.gov (United States)

1992-01-01

In conjunction with Space Shuttle Main Engine testing at Stennis, the Nordberg Water Pumps at the High Pressure Industrial Water Facility provide water for cooling the flame deflectors at the test stands during test firings.

Development of Industrial High-Speed Transfer Parallel Robot

International Nuclear Information System (INIS)

Kim, Byung In; Kyung, Jin Ho; Do, Hyun Min; Jo, Sang Hyun

2013-01-01

Parallel robots used in industry require high stiffness or high speed because of their structural characteristics. Nowadays, the importance of rapid transportation has increased in the distribution industry. In this light, an industrial parallel robot has been developed for high-speed transfer. The developed parallel robot can handle a maximum payload of 3 kg. For a payload of 0.1 kg, the trajectory cycle time is 0.3 s (come and go), and the maximum velocity is 4.5 m/s (pick amp, place work, adept cycle). In this motion, its maximum acceleration is very high and reaches approximately 13g. In this paper, the design, analysis, and performance test results of the developed parallel robot system are introduced

Safeness of radiological machinery

International Nuclear Information System (INIS)

Yokoyama, Shun

1979-01-01

The human factors affecting the safeness of radiological machinery, which are often very big and complicated machines, are described from the stand point of handling. 20 to 50% of the troubles on equipments seem to be caused by men. This percentage will become even higher in highly developed equipments. Human factors have a great influence on the safeness of radiological equipments. As the human factors, there are sensory factors and knowledge factors as well as psychological factors, and the combination of these factors causes mishandling and danger. Medical services at present are divided in various areas, and consist of the teamwork of the people in various professions. Good human relationship, education and control are highly required to secure the safeness. (Kobatake, H.)

The performing interaction between institutions and technology in the French electronuclear industry

International Nuclear Information System (INIS)

Finon, D.; Staropoli, C.

2000-10-01

Among the various traditional ''grands programmes'' typical of the French public intervention in high-tech industries, the nuclear programme is often considered as one of the major successes. However in recent years, the French national nuclear system, as composed of the whole set of institutions and relations between organisations in this sector, is affected by different exogenous shocks. In disorder those shocks are the European power markets liberalization legislation, the persistence of the world-wide nuclear market depression, the competition of a new power generation technology (gas turbine), and the globalization and concentration of the world-wide electromechanical industry. So, in the power industry of many OECD countries, the social acceptance crisis of nuclear technology as well as the emergence of the much less capital-intensive gas turbine relax the co-determination and open up the institutional choice. Conversely, in France, the performances of the nuclear program help to maintain the nuclear option, thus justifying the preservation of the existing industrial organisation and institutional scheme. In order to characterise the joint institutional and technological dynamics of the French electricity supply industry two stages are distinguished and discussed: first the efficient adaptation of institutions and industrial relationships to the nuclear as a new technology, and second the influence of technological features on the industry structures changes. (A.L.B.)

The performing interaction between institutions and technology in the French electronuclear industry

Energy Technology Data Exchange (ETDEWEB)

Finon, D.; Staropoli, C

2000-10-01

Among the various traditional ''grands programmes'' typical of the French public intervention in high-tech industries, the nuclear programme is often considered as one of the major successes. However in recent years, the French national nuclear system, as composed of the whole set of institutions and relations between organisations in this sector, is affected by different exogenous shocks. In disorder those shocks are the European power markets liberalization legislation, the persistence of the world-wide nuclear market depression, the competition of a new power generation technology (gas turbine), and the globalization and concentration of the world-wide electromechanical industry. So, in the power industry of many OECD countries, the social acceptance crisis of nuclear technology as well as the emergence of the much less capital-intensive gas turbine relax the co-determination and open up the institutional choice. Conversely, in France, the performances of the nuclear program help to maintain the nuclear option, thus justifying the preservation of the existing industrial organisation and institutional scheme. In order to characterise the joint institutional and technological dynamics of the French electricity supply industry two stages are distinguished and discussed: first the efficient adaptation of institutions and industrial relationships to the nuclear as a new technology, and second the influence of technological features on the industry structures changes. (A.L.B.)

30 CFR 77.803 - Fail safe ground check circuits on high-voltage resistance grounded systems.

Science.gov (United States)

2010-07-01

... circuits on high-voltage resistance grounded systems. On and after September 30, 1971, all high-voltage... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Fail safe ground check circuits on high-voltage resistance grounded systems. 77.803 Section 77.803 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION...

Fiscal 1997 survey report. `Ultra high electronic technology development promotion project` under consignment from NEDO; 1997 nendo kenkyu seika hokokusho. Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku jigyo `Chosentan denshi gijutsu kaihatsu sokushin jigyo`

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-05-01

For the purpose of establishing ultra high technology of a next next generation level, the R and D was conducted of ultra fine processing process technology, technologies on limit measuring/analysis/control and new functional electronic materials. Themes of the R and D are electronic beam direct picture drawing system technology, ultra short wavelength electromagnetic radiation patterning/system technology, ultra fine sensitizing technology, ultra high accuracy shading system technology, ultra high tech plasma reactive measuring/analysis/control technology, ultra high tech cleaning basic technology, ultra high sensitivity medium technology, new functional element/film formation technology, etc. This R and D is a greatly influential basic research in the whole industrial field, and therefore, it is necessary that researchers standing foremost in each field of industry/university/government join the project and that various R and D infrastructures are made the most of. For this, the concentrated joint research method and the dispersed joint research method are combined, and the R and D is being conduced by equal partnership of each researcher. 421 refs., 823 figs., 91 tabs.

Decision Making In A High-Tech World: Automation Bias and Countermeasures

Science.gov (United States)

Mosier, Kathleen L.; Skitka, Linda J.; Burdick, Mark R.; Heers, Susan T.; Rosekind, Mark R. (Technical Monitor)

1996-01-01

Automated decision aids and decision support systems have become essential tools in many high-tech environments. In aviation, for example, flight management systems computers not only fly the aircraft, but also calculate fuel efficient paths, detect and diagnose system malfunctions and abnormalities, and recommend or carry out decisions. Air Traffic Controllers will soon be utilizing decision support tools to help them predict and detect potential conflicts and to generate clearances. Other fields as disparate as nuclear power plants and medical diagnostics are similarly becoming more and more automated. Ideally, the combination of human decision maker and automated decision aid should result in a high-performing team, maximizing the advantages of additional cognitive and observational power in the decision-making process. In reality, however, the presence of these aids often short-circuits the way that even very experienced decision makers have traditionally handled tasks and made decisions, and introduces opportunities for new decision heuristics and biases. Results of recent research investigating the use of automated aids have indicated the presence of automation bias, that is, errors made when decision makers rely on automated cues as a heuristic replacement for vigilant information seeking and processing. Automation commission errors, i.e., errors made when decision makers inappropriately follow an automated directive, or automation omission errors, i.e., errors made when humans fail to take action or notice a problem because an automated aid fails to inform them, can result from this tendency. Evidence of the tendency to make automation-related omission and commission errors has been found in pilot self reports, in studies using pilots in flight simulations, and in non-flight decision making contexts with student samples. Considerable research has found that increasing social accountability can successfully ameliorate a broad array of cognitive biases and

UNFOLDINGS OF THE CYLINDRICA L SURFACES USED IN THE INDUSTRIAL INSTALLATIONS

Directory of Open Access Journals (Sweden)

VASILE GHEORGHITA

2013-02-01

Full Text Available The connections in the construction of the various industrial installations: pipes, boilers, joints elements and fittings have a cylindrical configuration, or similar cylindrical shape. The execution and their installation require knowledge of the unfolding and intersection curves, which compose them. The graphical solving of the problems of tech nical representation has enabled the formation of abstract geometric of the pieces forms and the ability to see into space. The paper proposes to establish the unfolding of a connection, used in the industrial equipments, by the classical method of the des criptive geometry and mathematics, using appropriate software

Implications of inherent safe nuclear power system

International Nuclear Information System (INIS)

Song, Yo-Taik

1987-01-01

The safety of present day nuclear power reactors and research reactors depends on a combination of design features of passive and active systems, and the alert judgement of their operators. A few inherently safe designs of nuclear reactors for power plants are currently under development. In these designs, the passive systems are emphasized, and the active systems are minimized. Also efforts are made to eliminate the potential for human failures that initiate the series of accidents. If a major system fails in these designs, the core is flooded automatically with coolants that flow by gravity, not by mechanical pumps or electromagnetic actuators. Depending on the choice of the coolants--water, liquid metal and helium gas--there are three principal types of inherently safe reactors. In this paper, these inherently safe reactor designs are reviewed and their implications are discussed. Further, future perspectives of their acceptance by nuclear industries are discussed. (author)

The struggle for safe nuclear expansion in China

International Nuclear Information System (INIS)

Xu, Y.C.

2014-01-01

After a temporary halt following the Fukushima nuclear disaster in March 2011, China resumed its fast, yet cautious, expansion of nuclear energy programme. Nuclear energy is considered as part of the general strategy to deal with the challenges of energy security and climate change and to advance with ‘state of the art’ technology in its development. This article briefly discusses recent development in and driving forces behind nuclear industry in China, and several challenges it has been facing: how to adopt, adapt, standardise and indigenise whose technologies, and how to address the shortage of qualified nuclear engineers, scientists, skilled labour force and qualified regulators. More importantly, it argues that safe and secure nuclear development requires consistent policies and effective regulations. Therefore, it is crucial to build policy and regulatory capacities based on coordination, planning and management of government agencies and the industry. - Highlights: • Nuclear energy development in China. • Nuclear technology selection. • Human capital. • Regulatory regime. • Safe and secure development

Assesment of safe discharge limits in the nuclear industry

International Nuclear Information System (INIS)

Van As, D.

1984-01-01

Routine releases from the nuclear industry to the environment are controlled by three principles, viz. that the practice creating the effluents should be kept as low as reasonably achievable, and radiation dose limits should not be exceeded. In the nuclear industry, the discharge of radioactive effluent is controlled by a system of dose limitation. The application of this system to conventional effluents require: i) a quantitative relationship between intake and effect so as to establish intake limits; ii) environmental models that will allow calculation of the relationship between discharge and intake; iii) a measure of the total detriment due to the discharge. For such a system discharge limits can be established for the desired level of risk (safety)

Pathways to High-tech Valleys and Research Triangles

NARCIS (Netherlands)

Hulsink, W.; Dons, H.

2008-01-01

Silicon Valley and the industrial districts of Italy, where shared identity, superior skills, regional specialization and trust-based networking among local firms have produced dynamic and flexible ecosystems, are inspiring examples of the successful promotion of thriving technology and business

SA on the brink of new industry ... the disposal of nuclear waste

International Nuclear Information System (INIS)

White, M.

1984-01-01

South Africa stands at the threshold of an important new industry - nuclear waste management - that could earn the country billions in foreign exchange. Local developments in handling nuclear waste are highly advanced. Detailed agricultural, ecological, hydrological, mineralogical, sociological, population and seismic surveys have determined that the site at Vaalputs is ideal for its chosen purpose. South Africa's knowledge of dangerous waste disposal is a natural resource that could be turned into a highly profitable and safe industry

Virginia Tech team qualifies as DARPA Urban Challenge semi-finalist

OpenAIRE

Crumbley, Liz

2007-01-01

"VictorTango," a team of Virginia Tech engineering and geography students, will travel to Victorville, Calif., for the national qualifying rounds of the Urban Challenge autonomous vehicle competition, sponsored by the Defense Advanced Research Projects Agency (DARPA).

Technological inputs and productivity growth in China's high-tech industries

NARCIS (Netherlands)

Wang, L.; Szirmai, A.

2003-01-01

The relationships between investment in R&D and productivity growth at sectoral level have been well documented in the literature. So far little research has been done on this topic for China, in part due to data limitations. This paper presents an empirical study of productivity growth and R&D at

Project-Based Learning in the Masters degree in Nuclear Engineering at BarcelonaTECH. Experience gained in the area of Management of Nuclear Power Plants

International Nuclear Information System (INIS)

Reventos, F.; Vives, E.; Brunet, A.; Sabate, R.; Calvino, F.; Batet, L.

2014-01-01

From its first edition, that took place in 2011-2012, the Masters degree in Nuclear Engineering from BarcelonaTECH has been using techniques of Project-Based Learning to fulfill the purpose of training nuclear engineers with a profile suitable for positions in the industry. The Master is sponsored by ENDESA and relies on the collaboration with institutions and companies. The Master is embedded in EMINE, the European Master in Innovation in Nuclear Energy, supported by KIC-InnoEnergy and the European Institute of Technology. (Author)

Project-Based Learning in the Masters degree in Nuclear Engineering at BarcelonaTECH. Experience gained in the area of Management of Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Reventos, F.; Vives, E.; Brunet, A.; Sabate, R.; Calvino, F.; Batet, L.

2014-07-01

From its first edition, that took place in 2011-2012, the Masters degree in Nuclear Engineering from BarcelonaTECH has been using techniques of Project-Based Learning to fulfill the purpose of training nuclear engineers with a profile suitable for positions in the industry. The Master is sponsored by ENDESA and relies on the collaboration with institutions and companies. The Master is embedded in EMINE, the European Master in Innovation in Nuclear Energy, supported by KIC-InnoEnergy and the European Institute of Technology. (Author)

TECHNOLOGICAL APPLICATION OF MICROALGAE IN POWER INDUSTRY AND ENVIRONMENTAL PROTECTION

Directory of Open Access Journals (Sweden)

Ilmutdin M. Abdulagatov

2018-01-01

Full Text Available Abstract. Aim. The aim of the study is to show the possibility and efficiency of large-scale industrial production of microalgae in the Republic of Dagestan for the development of agriculture (feed for animals and poultry and other technological applications in the food and pharmaceutical industries for the production of algalin flour (eco bread, polyunsaturated fatty acids (omega-3, omega-6 physiologically necessary for humans, biologically active substances (astaxanthin, phycocyanin, new-generation antibiotics, biofuels and other high added value biotechnological products. The problems of using microalgae for bioremediation of the environment, in particular, purification of geothermal waters from phenols before discharging into the sewage system are considered. Methods. Microalgae are grown in closed and open type plants. Valuable algae components can be extracted using supercritical fluid technology of continuous action. Results. We give a comparative evaluation of the efficiency of using microalgae as a biological raw material in comparison with traditionally used oilseeds. Conclusion. For Dagestan, located on the shore of the Caspian Sea, with its warm climate and an abundance of solar and geothermal energy, the development of this technology is a task of great economic importance. The advantages of microalgae technologies are the basis for the creation of large-scale production of microalgae in southern Russia. Biotechnology in Dagestan can become not only profitable, but also a high-tech and innovative industry.

Where High-Tech Meets High-Touch: an example of effective cross-disciplinary collaboration in education

Science.gov (United States)

Holzhauer, B.; Mooney, M. E.

2012-12-01

How can non-formal education programs effectively blend hands-on, place-based field science lessons with technology and digital media to teach abstract global concepts in a local setting? Using climate change as an overarching concept, the Aldo Leopold Nature Center (ALNC) in Madison, WI, is developing exhibits and digital curricula, strengthened through partnerships with local and national experts from scientific and education fields, to effectively increase the public's interest in and understanding of science and technology, how the world works, and what we can do to adapt, mitigate, and innovate sustainable solutions. The exhibits and multimedia content, centered on topics such as climate, energy, weather, and phenology, have been developed in consultation with partners like the National Academy of Sciences and various departments at the University of Wisconsin (UW). Outdoor "high-touch" programs are complemented with "high-tech" exhibits and media, including touchscreen kiosks and the National Oceanic and Atmospheric Administration's (NOAA) Science On a Sphere® global display system, tying together multimedia experiences with peer-reviewed cutting-edge science to ensure maximum comprehension by appealing and connecting to learners of all ages and learning modalities. The curriculum is being developed in alignment with local and national education standards and science and climate literacy frameworks (such as "The Essential Principles of Climate Sciences," U.S. Global Change Research Program / U.S. Climate Change Science Program). Its digital format allows it to be easily adapted to visitors' learning styles and cognitive levels and updated with relevant new content such as real-time climate data or current visualizations from the UW Cooperative Institute for Meteorological Satellite Studies. Drawing upon ALNC's award-winning environmental education experiences, professional development networks such as NOAA's Climate Stewards Education Program, and existing

Proposal of a system of indicators to assess the training of experts in a high-tech organization

International Nuclear Information System (INIS)

Elías Hardy, Lidia Lauren; González Olaguive, Elizabeth Vicenta; Martínez Martínez, Elisa

2015-01-01

Objective: present a proposal of a system of indicators to assess actions aimed at the training and development of experts in a high-tech organization. Methods: an analysis was conducted of the various theories dealing with the training and development of experts, examining their features and components. Design of the system of indicators was based on surveys and direct observation. The system of indicators thus designed was validated with the Delphi method, the application of the Likert scale and the statistical treatment of answers provided by experts, using median and interquartile range values to establish the consensus of experts. Results: a working definition is proposed of the concept expert based on two dimensions: qualification and performance, and individual and collective variables, indicators and measurement criteria. Cronbach's alpha coefficient (0,8655) showed the internal consistency of the tool used. The median and interquartile range values obtained made it possible to establish the consensus of participants in the validation of the system of indicators. Conclusions: the system of indicators developed and its two dimensions make it possible to assess the training and development of experts at the Cuban Neuroscience Center, as well as the system of actions performed. The indicator showing the lowest results is that of productivity of experts in the training of human resources of high academic level. (author)

Quality performance-based training enhances safe and effective transport operations

International Nuclear Information System (INIS)

McCall, D.L.

1993-01-01

If the hazardous materials transportation industry is to reduce human error, reduce accidents, and improve its public image, there must be assurance that transportation personnel are properly trained and qualified to perform their jobs in a safe and efficient manner. This training must make them intimately aware of the hazards and risks associated with transport activities, ensure understanding of responsibilities and liabilities unique to their job, and ensure that they can competently perform functional duties vital to safety. To ensure that trained and qualified personnel are on the job, it is essential that the training be performance-based and require trainees to demonstrate functional proficiency. Performance-based training has proven to be a highly effective means of ensuring personnel are qualified to conduct their assignments safely and efficiently. This training is designed around the basic premise that training must be provided that supplies the information necessary for each worker to perform their assigned duties at a predetermined and acceptable level of expertise and skill. (J.P.N.)

Industrial ecology.

Science.gov (United States)

Patel, C K

1992-01-01

Industrial ecology addresses issues that will impact future production, use, and disposal technologies; proper use of the concept should reduce significantly the resources devoted to potential remediation in the future. This cradle-to-reincarnation production philosophy includes industrial processes that are environmentally sound and products that are environmentally safe during use and economically recyclable after use without adverse impact on the environment or on the net cost to society. This will require an industry-university-government round table to set the strategy and agenda for progress. PMID:11607254

Coastal flooding as a parameter in multi-criteria analysis for industrial site selection

Science.gov (United States)

Christina, C.; Memos, C.; Diakoulaki, D.

2014-12-01

Natural hazards can trigger major industrial accidents, which apart from affecting industrial installations may cause a series of accidents with serious impacts on human health and the environment far beyond the site boundary. Such accidents, also called Na-Tech (natural - technical) accidents, deserve particular attention since they can cause release of hazardous substances possibly resulting in severe environmental pollution, explosions and/or fires. There are different kinds of natural events or, in general terms, of natural causes of industrial accidents, such as landslides, hurricanes, high winds, tsunamis, lightning, cold/hot temperature, floods, heavy rains etc that have caused accidents. The scope of this paper is to examine the coastal flooding as a parameter in causing an industrial accident, such as the nuclear disaster in Fukushima, Japan, and the critical role of this parameter in industrial site selection. Land use planning is a complex procedure that requires multi-criteria decision analysis involving economic, environmental and social parameters. In this context the parameter of a natural hazard occurrence, such as coastal flooding, for industrial site selection should be set by the decision makers. In this paper it is evaluated the influence that has in the outcome of a multi-criteria decision analysis for industrial spatial planning the parameter of an accident risk triggered by coastal flooding. The latter is analyzed in the context of both sea-and-inland induced flooding.

Opportunities for optics within tomorrow’s high-tech

DEFF Research Database (Denmark)

Hanson, Steen Grüner

The use of miniaturized optical sensors as input devices based on speckle phenomena will be discussed alongside with some considerations on the path to industrial implementation. Based on two examples from the field of cursor control systems, the future opportunities for dissemination into indust...

LEADIR-PS: the path to a safe and economic SMR

Energy Technology Data Exchange (ETDEWEB)

Hart, R.S. [Nothern Nuclear Industries Inc., Cambridge, Ontario (Canada)

2014-07-01

Northern Nuclear Industries Incorporated (N{sup 2} I{sup 2}) is developing a family of Small Modular Reactors (SMRs) called LEADIR-PS, an acronym for LEAD-cooled Integral Reactor-Passively Safe. LEADIR-PS plants under development, focused on process heat applications and the energy demands of Canada, are the LEADIR-PS100 with an output of 100 MWth and LEADIR-PS300 with an output of 300 MWth. A plant consisting of six LEADIR-PS300 reactor modules serving a common turbine-generator, called the LEADIR-PS Six-Pack, is focused on serving areas with higher energy demands. LEADIR-PS integrates the inherent safety features of the Modular High Temperature Gas Reactor and molten lead coolant in an integral pool type reactor configuration. Molten lead coolant, which boils at 1750 {sup o}C,avoids the cost of a reactor pressure vessel and high pressure/high temperature reactor coolant systems, and the safety concerns regarding pressure vessel and large capacity reactor coolant system piping rupture and precludes evaporation of the coolant. Molten lead does not chemically react with air, water, or graphite. The Gen IV+ LEADIR-PS plants are inherently/passively safe. There are no active systems required for safe shutdown and decay heat removal. Safety is assured without active or stored energy power supply, without a requirement to reposition valves or other devices and operator intervention or action. The unprecedented safety achieved by LEADIR-PS reactors avoids requirements for a large exclusion radius and demanding evacuation plan requirements. LEADIR-PS, with steam conditions of 370 {sup o}C and 12 MPa (more than twice that of water cooled reactors), can serve over 85% of the world's non-transportation process heat demands and is ideally suited to serving Combined Heat and Electricity demands and industrial parks. Energy utilization of over 95% is feasible in process heat and Combined Heat and Electricity applications. The simple robust design of LEADIR-PS plants in

Analysis of low-carbon industrial symbiosis technology for carbon mitigation in a Chinese iron/steel industrial park: A case study with carbon flow analysis

International Nuclear Information System (INIS)

Zhang, Hui; Dong, Liang; Li, Huiquan; Fujita, Tsuyoshi; Ohnishi, Satoshi; Tang, Qing

2013-01-01

CO 2 mitigation strategies in industrial parks are a significant component of the Chinese climate change mitigation policy, and industrial symbiosis can provide specific CO 2 mitigation opportunity. Technology is important to support symbiosis, but few studies in China have focused on this topic at the industrial park level. This research presented a case study in a national iron and steel industrial park in China. Focus was given onto carbon mitigation through industrial symbiosis technology using substance flow analysis (SFA). Three typical iron and steel industry technologies, including coke dry quenching (CDQ), combined cycle power plant (CCPP), and CO 2 capture by slag carbonization (CCSC) were evaluated with SFA. Technology assessment was further conducted in terms of carbon mitigation potential and unit reduction cost. Compared with the Business as usual (BAU) scenario, application with CDQ, CCPP, and CCSC reduced the net carbon emissions by 56.18, 134.43, and 222.89 kg CO 2 per ton crude steel inside the industrial parks, respectively, including both direct and indirect emissions. Economic assessment revealed that the unit costs for the three technologies were also high, thereby necessitating national financial support. Finally, relevant policy suggestions and future concerns were proposed and discussed. - Highlights: • A typical carbon mitigation case study on China iron/steel industrial park. • Using carbon SFA to investigate mitigation effects of industrial symbiosis technology. • CCPP greatly reduced the indirect carbon emission embodied in power purchase. • CCSC reduced the carbon emission by distributing fixed carbon into by-product. • Specific low carbon-tech promotion policies fit to China was discussed and proposed

Former Virginia Tech Aerospace and Ocean Engineering Department Head Dies

OpenAIRE

Gilbert, Karen

2003-01-01

James B. Eades, Jr., retired aerospace research scientist from Bluefield, W. Wa., and former professor and department head of aerospace and ocean engineering at Virginia Tech, died Dec. 14 at Veteran's Hospital in Washington, D.C. He was 80.

Effect of Nanotechnology Instructions on Senior High School Students

Science.gov (United States)

Lu, Chow-Chin; Sung, Chia-Chi

2011-01-01

In this research, we cooperate with senior high school teachers to understand current nanotechnology model of senior high school nanotechnology curriculum in Taiwan. Then design senior high school nanotechnology (nano-tech) curriculum to teach 503 senior high school students. After teaching the nano-tech curriculum we use the "Nanotechnology…