Influence of the cognitive workload on bicycle safety at four-legged intersections

DEFF Research Database (Denmark)

Kveladze, Irma; Agerholm, Niels

2018-01-01

is the influence of workload capacity on bicyclists spatial behaviour in a natural environment of four-legged intersections. Method: Due to the traffic safety of test participants, the study is divided in two phases. In the first phase, the actual physical environment of the four-legged intersection and bicyclists......-legged intersection. The eye tracking glasses will be used to make video and audio recording of visible field of where or how long bicyclists are allocating their visual attention while riding a bicycle and facing obstacles when crossing the four-legged intersection. On the second phase, a bicycle riding simulator...... riding task. This will allow to understand the allocation of bicyclists attention between primary and secondary tasks, to reveal the limit of the information processing capacity during biking. Results expected: Two experimental results will be incorporated to gain in-depth knowledge on bicycle accidents...

Design and analysis of sustainable paper bicycle

Science.gov (United States)

Roni Sahroni, Taufik; Nasution, Januar

2017-12-01

This paper presents the design of sustainable paper bicycle which describes the stage by stage in the production of paper bicycle. The objective of this project is to design a sustainable paper bicycles to be used for children under five years old. The design analysis emphasizes in screening method to ensure the design fulfil the safety purposes. The evaluation concept is presented in designing a sustainable paper bicycle to determine highest rating. Project methodology is proposed for developing a sustainable paper bicycle. Design analysis of pedal, front and rear wheel, seat, and handle were presented using AutoCAD software. The design optimization was performed to fulfil the safety factors by modifying the material size and dimension. Based on the design analysis results, it is found that the optimization results met the factor safety. As a result, a sustainable paper bicycle was proposed for children under five years old.

Workshop to review problem-behavior research programs : pedestrian, bicycle, and pupil transportation safety

Science.gov (United States)

1981-09-01

This report presents the proceedings of a workshop on pedestrian, bicycle, and pupil transportation safety. The purpose of this workshop was to develop specific recommendations for the planning and implementation of NHTSA research, development, and d...

A bicycle safety index for evaluating urban street facilities.

Science.gov (United States)

Asadi-Shekari, Zohreh; Moeinaddini, Mehdi; Zaly Shah, Muhammad

2015-01-01

The objectives of this research are to conceptualize the Bicycle Safety Index (BSI) that considers all parts of the street and to propose a universal guideline with microscale details. A point system method comparing existing safety facilities to a defined standard is proposed to estimate the BSI. Two streets in Singapore and Malaysia are chosen to examine this model. The majority of previous measurements to evaluate street conditions for cyclists usually cannot cover all parts of streets, including segments and intersections. Previous models also did not consider all safety indicators and cycling facilities at a microlevel in particular. This study introduces a new concept of a practical BSI to complete previous studies using its practical, easy-to-follow, point system-based outputs. This practical model can be used in different urban settings to estimate the level of safety for cycling and suggest some improvements based on the standards.

The Dutch Bicycle Master Plan and road safety : measures to be taken.

NARCIS (Netherlands)

Noordzij, P.C. & Blokpoel, A.

1998-01-01

The Bicycle Master Plan was launched in 1990 and concluded in 1996. To mark its conclusion, a study was carried out to assess developments in road safety for cyclists. An overview of future measures was also compiled. Since 1950, there have been three broad periods: (1) 1950-1975: an increase in the

40 CFR 52.1162 - Regulation for bicycle use.

Science.gov (United States)

2010-07-01

... safety education for bicyclists, motorists, children, students, street maintenance personnel and... as for a program of bicycle safety education including the motor vehicle operators license... bicycles share road space with motorized vehicles. (5) Bikeway means bike paths, bike lanes and bike routes...

Low-stress bicycling and network connectivity : [research brief].

Science.gov (United States)

2012-05-01

In one sense, a citys or regions bicycling network includes all of its roads and paths on which bicycling is permitted. However, some streets provide such a poor level of safety and comfort for bicycling that the majority of the population cons...

Identifying factors affecting the safety of mid-block bicycle lanes considering mixed 2-wheeled traffic flow.

Science.gov (United States)

Bai, Lu; Chan, Ching-Yao; Liu, Pan; Xu, Chengcheng

2017-10-03

Electric bikes (e-bikes) have been one of the fastest growing trip modes in Southeast Asia over the past 2 decades. The increasing popularity of e-bikes raised some safety concerns regarding urban transport systems. The primary objective of this study was to identify whether and how the generalized linear regression model (GLM) could be used to relate cyclists' safety with various contributing factors when riding in a mid-block bike lane. The types of 2-wheeled vehicles in the study included bicycle-style electric bicycles (BSEBs), scooter-style electric bicycles (SSEBs), and regular bicycles (RBs). Traffic conflict technology was applied as a surrogate measure to evaluate the safety of 2-wheeled vehicles. The safety performance model was developed by adopting a generalized linear regression model for relating the frequency of rear-end conflicts between e-bikes and regular bikes to the operating speeds of BSEBs, SSEBs, and RBs in mid-block bike lanes. The frequency of rear-end conflicts between e-bikes and bikes increased with an increase in the operating speeds of e-bikes and the volume of e-bikes and bikes and decreased with an increase in the width of bike lanes. The large speed difference between e-bikes and bikes increased the frequency of rear-end conflicts between e-bikes and bikes in mid-block bike lanes. A 1% increase in the average operating speed of e-bikes would increase the expected number of rear-end conflicts between e-bikes and bikes by 1.48%. A 1% increase in the speed difference between e-bikes and bikes would increase the expected number of rear-end conflicts between e-bikes/bikes by 0.16%. The conflict frequency in mid-block bike lanes can be modeled using generalized linear regression models. The factors that significantly affected the frequency of rear-end conflicts included the operating speeds of e-bikes, the speed difference between e-bikes and regular bikes, the volume of e-bikes, the volume of bikes, and the width of bike lanes. The

Bicycle Safety: Sport Education Style

Science.gov (United States)

Sinelnikov, Oleg A.; Hastie, Peter A.; Cole, Amy; Schneulle, Deanna

2005-01-01

Although the benefits of regular physical activity are well-documented and very well known, Americans are still becoming more sedentary and obese. As some experts envision the potential of nonmotorized transport in the future, especially in urban settings, it is not surprising that diverse groups view walking and bicycling as a solution to an…

Bilateral tension pneumothorax resulting from a bicycle-to-bicycle collision.

Science.gov (United States)

Edwin, Frank; Sereboe, Lawrence; Tettey, Mark Mawutor; Aniteye, Ernest; Bankah, Patrick; Frimpong-Boateng, Kwabena

2009-01-01

Bilateral tension pneumothorax occurring as a result of recreational activity is exceedingly rare. A 10-year-old boy with no previous respiratory symptoms was involved in a bicycle-to-bicycle collision during play. He was the only one hurt. A few hours later, he was rushed to the general casualty unit of the emergency department of our institution with respiratory distress, diminished bilateral chest excursions and diminished breath sounds. The correct diagnosis was made after a chest radiograph was obtained in the course of resuscitation at the casualty unit. Pleural space needle decompression was suggestive of tension only on the right. Bilateral tube thoracostomies provided effective relief. He was discharged from hospital after a week in excellent health. This case illustrates the need for children to have safety instruction to reduce the risks of recreational bicycling. Chest radiography may be needed to establish the diagnosis of bilateral tension pneumothorax. Needle thoracostomy decompression is not always effective.

SOFIE, a bicycle that supports older cyclists?

NARCIS (Netherlands)

Dubbeldam, R.; Baten, C.; Buurke, J. H.; Rietman, J. S.

2017-01-01

Older cyclists remain at high risk of sustaining an injury after a fall with their bicycle. A growing awareness for the need and possibilities to support safety of older cyclists has been leading to bicycle design ideas. However, the effectiveness and acceptance of such designs has not been studied

Road safety and bicycle usage impacts of unbundling vehicular and cycle traffic in Dutch urban networks

NARCIS (Netherlands)

Schepers, Paul; Heinen, Eva; Methorst, Rob; Wegman, Fred

2013-01-01

Bicycle-motor vehicle crashes are concentrated along distributor roads where cyclists are exposed to greater volumes of high-speed motorists than they would experience on access roads. This study examined the road safety impact of network-level separation of vehicular and cycle traffic in Dutch

Road safety and bicycle usage impacts of unbundling vehicular and cycle traffic in Dutch urban networks.

NARCIS (Netherlands)

Schepers, P. Heinen, E. Methorst, R. & Wegman, F.

2015-01-01

Bicycle-motor vehicle crashes are concentrated along distributor roads where cyclists are exposed to greater volumes of high-speed motorists than they would experience on access roads. This study examined the road safety impact of network-level separation of vehicular and cycle traffic in Dutch

Reviving a ghost in the history of technology: the social construction of the recumbent bicycle.

Science.gov (United States)

Ahmed, Hassaan; Qureshi, Omer Masood; Khan, Abid Ali

2015-02-01

Recumbent bicycles have never truly been associated with international cycling. Conventional safety (upright) bicycles have long been at the center of the cycling world, for both sport and transportation. This is despite the fact that recumbent bicycles are faster, more comfortable, and more efficient than the upright bicycles. The aim of this article is to explain the historical and social perspectives that led to the rejection of the recumbent bicycle by utilizing the theory of Social Construction of Technology (SCOT) and Bijker's two power theory, providing a contrast with the adoption of the safety bicycle.

Fatal Cervical Spine Injury Following a Bicycle Crash

Directory of Open Access Journals (Sweden)

Uhrenholt Lars

2017-06-01

Full Text Available Spinal injury following direct loading of the head and neck is a rare sequel of bicycle crashes. Fatal head injuries following bicycle crashes have been described in great detail and safety measures such as bicycle helmets have been developed accordingly. Less frequently, however, potentially severe cervical spine injuries have been described. We present the case of a middle-aged female who sustained an ultimately fatal cervical spine injury following a collision with a car whilst biking wearing a helmet. We discuss the literature regarding the protective effects of bicycle helmets, the relevance to cervical spine injury and legislation on mandatory use of helmets for injury prevention.

Real-time bicycle detection at signalized intersections using thermal imaging technology

Science.gov (United States)

Collaert, Robin

2013-02-01

More and more governments and authorities around the world are promoting the use of bicycles in cities, as this is healthy for the bicyclist and improves the quality of life in general. Safety and efficiency of bicyclists has become a major focus. To achieve this, there is a need for a smarter approach towards the control of signalized intersections. Various traditional detection technologies, such as video, microwave radar and electromagnetic loops, can be used to detect vehicles at signalized intersections, but none of these can consistently separate bikes from other traffic, day and night and in various weather conditions. As bikes should get a higher priority and also require longer green time to safely cross the signalized intersection, traffic managers are looking for alternative detection systems that can make the distinction between bicycles and other vehicles near the stop bar. In this paper, the drawbacks of a video-based approach are presented, next to the benefits of a thermal-video-based approach for vehicle presence detection with separation of bicycles. Also, the specific technical challenges are highlighted in developing a system that combines thermal image capturing, image processing and output triggering to the traffic light controller in near real-time and in a single housing.

The effectiveness of a bicycle safety program for improving safety-related knowledge and behavior in young elementary students.

Science.gov (United States)

McLaughlin, Karen A; Glang, Ann

2010-05-01

The purpose of this study was to evaluate the "Bike Smart" program, an eHealth software program that teaches bicycle safety behaviors to young children. Participants were 206 elementary students in grades kindergarten to 3. A random control design was employed to evaluate the program, with students assigned to either the treatment condition (Bike Smart) or the control condition (a video on childhood safety). Outcome measures included computer-based knowledge items (safety rules, helmet placement, hazard discrimination) and a behavioral measure of helmet placement. Results demonstrated that regardless of gender, cohort, and grade the participants in the treatment group showed greater gains than control participants in both the computer-presented knowledge items (p > .01) and the observational helmet measure (p > .05). Findings suggest that the Bike Smart program can be a low cost, effective component of safety training packages that include both skills-based and experiential training.

36 CFR 1004.30 - Bicycles.

Science.gov (United States)

2010-07-01

... parking area to bicycle use pursuant to the criteria and procedures of §§ 1001.5 and 1001.7 of this... consistent with the protection of natural, scenic and aesthetic values, safety considerations and management...

Evaluating traffic informers: testing the behavioral and social-cognitive effects of an adolescent bicycle safety education program.

Science.gov (United States)

Feenstra, Hans; Ruiter, Robert A C; Kok, Gerjo

2014-12-01

In The Netherlands, 12-24 years old are over-represented in the total number of traffic fatalities and injuries. In this study, the traffic informer program - designed to promote safe traffic behavior in the pre-driver population - was experimentally evaluated, with a specific focus on bicycle use. Students were subjected to graphic videos of traffic accidents and listened to a first-person narrative provided by a traffic accident victim. The influence of the program on concepts derived from the theory of planned behavior and protection motivation theory (attitudes, norms, self-efficacy, risk-perception, intention and behavior) was assessed. Students from various schools (N=1593;M age=15 years, SD=.84) participated in a quasi-experimental study, either in an experimental or a control group, completing self-report questionnaires one week prior to the program implementation and approximately one month after the program implementation. Mixed regression analyses showed significant positive and negative time × intervention interaction effects on attitude toward traffic violations, relative attitude toward traffic safety, and risk comparison, but not on intention and behavior. More research is needed to find effective behavioral change techniques (other than increasing risk awareness) for promoting safe traffic behavior in adolescents. Research is also needed to address how these can be translated into effective interventions and educational programs. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

From Safe Systems to Patient Safety

DEFF Research Database (Denmark)

Aarts, J.; Nøhr, C.

2010-01-01

for the third conference with the theme: The ability to design, implement and evaluate safe, useable and effective systems within complex health care organizations. The theme for this conference was "Designing and Implementing Health IT: from safe systems to patient safety". The contributions have reflected...... and implementation of safe systems and thus contribute to the agenda of patient safety? The contributions demonstrate how the health informatics community has contributed to the performance of significant research and to translating research findings to develop health care delivery and improve patient safety......This volume presents the papers from the fourth International Conference on Information Technology in Health Care: Socio-technical Approaches held in Aalborg, Denmark in June 2010. In 2001 the first conference was held in Rotterdam, The Netherlands with the theme: Sociotechnical' approaches...

36 CFR 4.30 - Bicycles.

Science.gov (United States)

2010-07-01

... road or parking area to bicycle use pursuant to the criteria and procedures of §§ 1.5 and 1.7 of this... consistent with the protection of a park area's natural, scenic and aesthetic values, safety considerations...

Automated and connected vehicle (AV/CV) test bed to improve transit, bicycle, and pedestrian safety : concept of operations plan.

Science.gov (United States)

2017-02-01

This document presents the Concept of Operations (ConOps) Plan for the Automated and Connected Vehicle (AV/CV) Test Bed to Improve Transit, Bicycle, and Pedestrian Safety. As illustrated in Figure 1, the plan presents the overarching vision and goals...

What do we know about bicycle helmets?

NARCIS (Netherlands)

Bogerd, C.P. Halldin, P. Houtenbos, M. Otte, D. Rossi, R.M. Walker, L. Willinger, R. & Shinar, D.

2012-01-01

Cycling is an excellent sustainable alternative to driving for many journeys. But cyclists have fewer safety options than car-users, with a helmet being the main safety device that is available. However, there are indications that increasing bicycle helmet usage through legislation causes

Modeling of speed distribution for mixed bicycle traffic flow

Directory of Open Access Journals (Sweden)

Cheng Xu

2015-11-01

Full Text Available Speed is a fundamental measure of traffic performance for highway systems. There were lots of results for the speed characteristics of motorized vehicles. In this article, we studied the speed distribution for mixed bicycle traffic which was ignored in the past. Field speed data were collected from Hangzhou, China, under different survey sites, traffic conditions, and percentages of electric bicycle. The statistics results of field data show that the total mean speed of electric bicycles is 17.09 km/h, 3.63 km/h faster and 27.0% higher than that of regular bicycles. Normal, log-normal, gamma, and Weibull distribution models were used for testing speed data. The results of goodness-of-fit hypothesis tests imply that the log-normal and Weibull model can fit the field data very well. Then, the relationships between mean speed and electric bicycle proportions were proposed using linear regression models, and the mean speed for purely electric bicycles or regular bicycles can be obtained. The findings of this article will provide effective help for the safety and traffic management of mixed bicycle traffic.

Local Safety Toolkit: Enabling safe communities of opportunity

CSIR Research Space (South Africa)

Holtmann, B

2010-08-31

Full Text Available remain inadequate to achieve safety. The Local Safety Toolkit supports a strategy for a Safe South Africa through the implementation of a model for a Safe Community of Opportunity. The model is the outcome of work undertaken over the course of the past...

On the use of naturalistic methods to examine safety-relevant behaviours amongst children and evaluate a cycling education program.

Science.gov (United States)

Hatfield, J; Dozza, M; Patton, D A; Maharaj, P; Boufous, S; Eveston, T

2017-11-01

School-based cycling education programs aim to improve cycling safety and participation amongst children. Available research suggests that typical programs, which focus on bicycle manoeuvring skills, have limited effects on behaviour observed on a track or planned route. The current study uses theoretically more valid, naturalistic cycling data, to evaluate Safe Cycle, a program that incorporates hazard and self-awareness training. Soon after Safe Cycle was delivered at treatment schools, research bicycles instrumented with a rearward- and a forward-facing camera were loaned to six children from treatment schools and six children from (waitlist) control schools. In each group half the children were in Year 6, and half were in Year 7/8. Each child was instructed to ride the research bicycle instead of their own bicycle for the 1-2 weeks that they had a research bicycle. Video data were reduced using a purpose-designed coding scheme that identified whether participants performed specific safety-relevant behaviours in appropriate circumstances. While the participants controlled their bicycles well, gave way appropriately to traffic at intersections, and stopped at red lights, participants frequently removed one or both hands from the handlebars, and seldom signalled turns, conducted over-shoulder-checks when changing lanes, or looked in multiple directions at intersections (except when crossing a road). While aspects of design and small sample sizes limited evaluation findings, this research demonstrated the feasibility and potential of naturalistic data to support cycling education program evaluation. Further, the study substantially extended available naturalistic study of children's cycling behaviour to highlight behaviours which might be targeted by cycling safety initiatives. Copyright © 2017 Elsevier Ltd. All rights reserved.

Safe cycling!

CERN Multimedia

Anaïs Schaeffer

2012-01-01

The HSE Unit will be running a cycling safety campaign at the entrances to CERN's restaurants on 14, 15 and 16 May. Pop along to see if they can persuade you to get back in the saddle!   With summer on its way, you might feel like getting your bike out of winter storage. Well, the HSE Unit has come up with some original ideas to remind you of some of the most basic safety rules. This year, the prevention campaign will be focussing on three themes: "Cyclists and their equipment", "The bicycle on the road", and "Other road users". This is an opportunity to think about the condition of your bike as well as how you ride it. From 14 to 16 May, representatives of the Swiss Office of Accident Prevention and the Touring Club Suisse will join members of the HSE Unit at the entrances to CERN's restaurants to give you advice on safe cycling (see box). They will also be organising three activity stands where you can test your knowle...

Comparison of five bicycle facility designs in signalized intersections using traffic conflict studies

DEFF Research Database (Denmark)

Madsen, Tanja Kidholm Osmann; Lahrmann, Harry Spaabæk

2017-01-01

Highlights •Traffic conflict study comparing cyclists’ relative risk for five bicycle layouts. •Watchdog video analysis software applied to reduce video data. •Video analysis software necessary to conduct larger conflict studies. •Recessed bicycle track seems to provide the highest safety level...

LearnSafe. Learning organisations for nuclear safety

International Nuclear Information System (INIS)

Wahlstroem, B.; Kettunen, J.; Reiman, T.

2005-03-01

The nuclear power industry is currently undergoing a period of major change, which has brought with it a number of challenges. These changes have forced the nuclear power plants to initiate their own processes of change in order to adapt to the new situation. This adaptation must not compromise safety at any time, but during a rapid process of change there is a danger that minor problems may trigger a chain of events leading to a degraded safety. Organisational learning has been identified as an important component in ensuring the continued safety and efficiency of nuclear organisations. In response to these challenges a project LearnSafe 'Learning organisations for nuclear safety' was set up and funded by the European Community under the 5th Euratom Framework Programme. The present report gives an account of the LearnSafe project and its major results. (orig.)

Premiering SAFE for Safety Added Fuel Element - 15020

International Nuclear Information System (INIS)

Bhowmik, P.K.; Shamim, J.A.; Suh, K.Y.; Suh, K.S.

2015-01-01

The impact of the Fukushima accident has been the willingness to implement passive safety measures in reactor design and to simplify reactor design itself. Within this framework, a new fuel element, named SAFE (Safety Added Fuel Element) based on the concept of accident tolerant fuel, is presented. SAFE is a new type of fuel element cooled internally and externally by light water and with stainless steel as the cladding material. The removal of boron may trigger a series of changes which may simplify the system greatly. A simplified thermal analysis of SAFE shows that the fuel centerline temperature is well below the maximal limit during the normal operation of the plant

How similar are two-unit bicycle and motorcycle crashes?

Science.gov (United States)

Haworth, Narelle; Debnath, Ashim Kumar

2013-09-01

This paper explores the similarities and differences between bicycle and motorcycle crashes with other motor vehicles. If similar treatments can be effective for both bicycle and motorcycle crashes, then greater benefits in terms of crash costs saved may be possible for the same investment in treatments. To reduce the biases associated with under-reporting of these crashes to police, property damage and minor injury crashes were excluded. The most common crash type for both bicycles (31.1%) and motorcycles (24.5%) was intersection from adjacent approaches. Drivers of other vehicles were coded most at fault in the majority of two-unit bicycle (57.0%) and motorcycle crashes (62.7%). The crash types, patterns of fault and factors affecting fault were generally similar for bicycle and motorcycle crashes. This confirms the need to combat the factors contributing to failure of other drivers to yield right of way to two-wheelers, and suggest that some of these actions should prove beneficial to the safety of both motorized and non-motorized two-wheelers. In contrast, child bicyclists were more often at fault, particularly in crashes involving a vehicle leaving the driveway or footpath. The greater reporting of violations by riders and drivers in motorcycle crashes also deserves further investigation. Copyright © 2013 Elsevier Ltd. All rights reserved.

Interventions in Bicycle Infrastructure, Lessons from Dutch and Danish Cases

DEFF Research Database (Denmark)

van Goeverden, K.; Nielsen, Thomas Alexander Sick; Harder, Henrik

2015-01-01

of interventions in bicycle infrastructure on travel choices, safety, design appreciation, and other factors. These clarify under which conditions certain measures are effective or not and inform about the effectiveness of improving a single route versus upgrading a whole network. The information from the studies...... to be still generally valid. In addition to studies that traditionally focus on dedicated bicycle infrastructure, two cases of shared space are discussed, a rather new type of intervention that assumes mixed use of infrastructure. One case is from Denmark, the other from the Netherlands. The paper will so...... uncover the valuable results of the possibly largest evaluations of interventions in bicycle infrastructure ever made, verify these by examining more recent studies, and contribute to the discussion of shared space....

Generally Recognized as Safe: Uncertainty Surrounding E-Cigarette Flavoring Safety

Directory of Open Access Journals (Sweden)

Clara G. Sears

2017-10-01

Full Text Available Despite scientific uncertainty regarding the relative safety of inhaling e-cigarette aerosol and flavorings, some consumers regard the U.S. Food and Drug Administration’s “generally recognized as safe” (GRAS designation as evidence of flavoring safety. In this study, we assessed how college students’ perceptions of e-cigarette flavoring safety are related to understanding of the GRAS designation. During spring 2017, an online questionnaire was administered to college students. Chi-square p-values and multivariable logistic regression were employed to compare perceptions among participants considering e-cigarette flavorings as safe and those considering e-cigarette flavorings to be unsafe. The total sample size was 567 participants. Only 22% knew that GRAS designation meant that a product is safe to ingest, not inhale, inject, or use topically. Of participants who considered flavorings to be GRAS, the majority recognized that the designation meant a product is safe to ingest but also considered it safe to inhale. Although scientific uncertainty on the overall safety of flavorings in e-cigarettes remains, health messaging can educate the public about the GRAS designation and its irrelevance to e-cigarette safety.

Safety Case for Safe-store

International Nuclear Information System (INIS)

Woollam, Paul B.

2002-01-01

Magnox Electric plc (Magnox), a wholly owned subsidiary of BNFL, owns 26 gas-cooled, graphite-moderated units on 11 sites in the UK. Eight units have been permanently shutdown and the remainder will shut this decade in a currently declared closure programme. The first of these reactors went to power in 1952 and the fleet has generated typically 9% of the UK's electricity during the last five decades. In accordance with UK Government policy, BNFL aims for a systematic and progressive reduction in hazards on its decommissioning sites. The end-point of the decommissioning process is that the reactors will be dismantled and their sites de-licensed. This will be done through minimising both the risks to the public, workers and the environment and also the lifetime cost, consistent with world class safety. There will be passive safe storage during deferment periods and it is BNFL's clear intent that the reactors will not be Safe-stored indefinitely. The main hazard associated with any decommissioned nuclear site is the spent fuel. Hence the reactors will be de-fuelled as soon as practicable after shutdown. After this work is complete, Cs-137 contaminated plant (e.g. fuel pools, effluent plant, and drains) will be dismantled when it is no longer needed. All other plant and buildings will also be dismantled when they are no longer needed, except for the reactor buildings which will be put into passive safe storage. Co-60 contaminated plant, such as steam generators, will be dismantled with the reactors. The reactors will be dismantled in a sequenced programme, with a notional start time around 100 years from shutdown. Magnox Electric is ensuring that the reactors and primary circuits on all its sites are well characterised. We have carried out a detailed, peer reviewed hazard identification on the lead site from which we have generated a rolling 25-year basic safety case. We have then searched for cliff edge effects and possible long-term changes to generate the 100-year

Bicycle Trains, Cycling, and Physical Activity: A Pilot Cluster RCT.

Science.gov (United States)

Mendoza, Jason A; Haaland, Wren; Jacobs, Maya; Abbey-Lambertz, Mark; Miller, Josh; Salls, Deb; Todd, Winifred; Madding, Rachel; Ellis, Katherine; Kerr, Jacqueline

2017-10-01

Increasing children's cycling to school and physical activity are national health goals. The objective was to conduct an RCT of a bicycle train program to assess impact on students' school travel mode and moderate-to-vigorous physical activity (MVPA). Pilot cluster RCT with randomization at the school level and N=54 participants. Fourth-fifth graders from four public schools serving low-income families in Seattle, WA in 2014 with analyses in 2015-2016. All participants were provided and fitted with bicycles, safety equipment (helmets, locks, and lights), and a 2- to 3-hour bicycle safety course. The intervention was a bicycle train offered daily (i.e., students volunteered to cycle with study staff to and from school). Time 1 assessments occurred prior to randomization. Time 2 assessments occurred after 3-5 weeks of the intervention (i.e., during Weeks 4-6 of the intervention period). The primary outcome was the percentage of daily commutes to school by cycling measured by validated survey. MVPA, measured by accelerometry and GPS units and processed by machine learning algorithms, was a secondary outcome. For two separate adjusted repeated measures linear mixed effects models in which students (N=54) were nested within schools (N=4), intervention participants had: (1) an absolute increase in mean percentage of daily commutes by cycling of 44.9%, (95% CI=26.8, 63.0) and (2) an increase in mean MVPA of 21.6 minutes/day, (95% CI=8.7, 34.6) from Time 1 to Time 2 compared with controls. A pilot bicycle train intervention increased cycling to school and daily MVPA in the short term among diverse, inner-city elementary school students. The bicycle train intervention appears promising and warrants further experimental trials among large, diverse samples with longer follow-up. This study is registered at www.clinicaltrials.gov NCT02006186. Copyright © 2017 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Device and method to determine perineal artery occlusion during road bicycling.

Science.gov (United States)

Parthiban, Sujeeth; Hotaling, James M; Ohlander, Samuel J; Baftiri, Amit P; Freels, Sally; Niederberger, Craig S

2014-01-01

Greater than 60 million American men who ride bicycles are at risk of developing erectile dysfunction. One possible reason is occlusion of the perineal arteries. Researchers relied on indirect methods and stationary models to study this problem. We developed a novel system to quantify occlusion among bicycle riders during a road bike ride. Our verification and validation activities show that this system can be safely used on human subjects to measure perineal artery occlusion. The method described in this paper provides a valuable tool to the researchers to study or to develop new solutions that alleviate this problem. The outcomes of these efforts will help millions of cyclists worldwide.

Revealed Preference Methods for Studying Bicycle Route Choice—A Systematic Review

Directory of Open Access Journals (Sweden)

Ray Pritchard

2018-03-01

Full Text Available One fundamental aspect of promoting utilitarian bicycle use involves making modifications to the built environment to improve the safety, efficiency and enjoyability of cycling. Revealed preference data on bicycle route choice can assist greatly in understanding the actual behaviour of a highly heterogeneous group of users, which in turn assists the prioritisation of infrastructure or other built environment initiatives. This systematic review seeks to compare the relative strengths and weaknesses of the empirical approaches for evaluating whole journey route choices of bicyclists. Two electronic databases were systematically searched for a selection of keywords pertaining to bicycle and route choice. In total seven families of methods are identified: GPS devices, smartphone applications, crowdsourcing, participant-recalled routes, accompanied journeys, egocentric cameras and virtual reality. The study illustrates a trade-off in the quality of data obtainable and the average number of participants. Future additional methods could include dockless bikeshare, multiple camera solutions using computer vision and immersive bicycle simulator environments.

Do Leadership Style, Unit Climate, and Safety Climate Contribute to Safe Medication Practices?

Science.gov (United States)

Farag, Amany; Tullai-McGuinness, Susan; Anthony, Mary K; Burant, Christopher

2017-01-01

This study aims at: examining if leadership style and unit climate predict safety climate; and testing the direct, indirect, and total effect of leadership style, unit climate, and safety climate on nurses' safe medication practices. The Institute of Medicine and nursing scholars propose that safety climate is a prerequisite to safety practices. However, there is limited empirical evidence about factors contributing to the development of safety climate and about the association with nurses' safe medication practices. This cross-sectional study used survey data from 246 RNs working in a Magnet® hospital. Leadership style and unit climate predicted 20% to 50% of variance on all safety climate dimensions. Model testing revealed the indirect impact of leadership style and unit climate on nurses' safe medication practices. Our hypothesized model explained small amount of the variance on nurses' safe medication practices. This finding suggests that nurses' safe medication practices are influenced by multiple contextual and personal factors that should be further examined.

How bicycle level of traffic stress correlate with reported cyclist accidents injury severities: A geospatial and mixed logit analysis.

Science.gov (United States)

Chen, Chen; Anderson, Jason C; Wang, Haizhong; Wang, Yinhai; Vogt, Rachel; Hernandez, Salvador

2017-11-01

Transportation agencies need efficient methods to determine how to reduce bicycle accidents while promoting cycling activities and prioritizing safety improvement investments. Many studies have used standalone methods, such as level of traffic stress (LTS) and bicycle level of service (BLOS), to better understand bicycle mode share and network connectivity for a region. However, in most cases, other studies rely on crash severity models to explain what variables contribute to the severity of bicycle related crashes. This research uniquely correlates bicycle LTS with reported bicycle crash locations for four cities in New Hampshire through geospatial mapping. LTS measurements and crash locations are compared visually using a GIS framework. Next, a bicycle injury severity model, that incorporates LTS measurements, is created through a mixed logit modeling framework. Results of the visual analysis show some geospatial correlation between higher LTS roads and "Injury" type bicycle crashes. It was determined, statistically, that LTS has an effect on the severity level of bicycle crashes and high LTS can have varying effects on severity outcome. However, it is recommended that further analyses be conducted to better understand the statistical significance and effect of LTS on injury severity. As such, this research will validate the use of LTS as a proxy for safety risk regardless of the recorded bicycle crash history. This research will help identify the clustering patterns of bicycle crashes on high-risk corridors and, therefore, assist with bicycle route planning and policy making. This paper also suggests low-cost countermeasures or treatments that can be implemented to address high-risk areas. Specifically, with the goal of providing safer routes for cyclists, such countermeasures or treatments have the potential to substantially reduce the number of fatalities and severe injuries. Published by Elsevier Ltd.

Predicting Free Flow Speed and Crash Risk of Bicycle Traffic Flow Using Artificial Neural Network Models

Directory of Open Access Journals (Sweden)

Cheng Xu

2015-01-01

Full Text Available Free flow speed is a fundamental measure of traffic performance and has been found to affect the severity of crash risk. However, the previous studies lack analysis and modelling of impact factors on bicycles’ free flow speed. The main focus of this study is to develop multilayer back propagation artificial neural network (BPANN models for the prediction of free flow speed and crash risk on the separated bicycle path. Four different models with considering different combinations of input variables (e.g., path width, traffic condition, bicycle type, and cyclists’ characteristics were developed. 459 field data samples were collected from eleven bicycle paths in Hangzhou, China, and 70% of total samples were used for training, 15% for validation, and 15% for testing. The results show that considering the input variables of bicycle types and characteristics of cyclists will effectively improve the accuracy of the prediction models. Meanwhile, the parameters of bicycle types have more significant effect on predicting free flow speed of bicycle compared to those of cyclists’ characteristics. The findings could contribute for evaluation, planning, and management of bicycle safety.

Multilevel models in the explanation of the relationship between safety climate and safe behavior.

Science.gov (United States)

Cheyne, Alistair; Tomás, José M; Oliver, Amparo

2013-01-01

This study examines the relationships between components of organizational safety climate, including employee attitudes to organizational safety issues; perceptions of the physical working environment, and evaluations of worker engagement with safety issues; and relates these to self-reported levels of safety behavior. It attempts to explore the relationships between these variables in 1189 workers across 78 work groups in a large transportation organization. Evaluations of safety climate, the working environment and worker engagement, as well as safe behaviors, were collected using a self report questionnaire. The multilevel analysis showed that both levels of evaluation (the work group and the individual), and some cross-level interactions, were significant in explaining safe behaviors. Analyses revealed that a number of variables, at both levels, were associated with worker engagement and safe behaviors. The results suggest that, while individual evaluations of safety issues are important, there is also a role for the fostering of collective safety climates in encouraging safe behaviors and therefore reducing accidents.

Importance of safety review to the safe operation of a nuclear plant

International Nuclear Information System (INIS)

Brinkerhoff, L.C.

1978-01-01

Widely differing standards of construction of nuclear reactors are employed in different countries. Although the reactor vendors, including designers and construction contractors, have a vested interest in safety, the ultimate responsibility for safety rests with the reactor facility operator. Even though governmental agencies, either directly or indirectly, must take a strong lead in developing policies and practices of safe operation, the reactor facility operator must recognize and accept the full responsibility for safe operation of the facility. The policies and practices of safe operation imposed by governmental agencies must help assure the prudent operation and the adequate maintenance of those structures, systems, and components of importance to safety. Since each country has a slightly different philosophy for achieving safety and each vendor utilizes different structures, systems, and components to fulfil this philosophy, it is imperative that the facility operator adequately maintain those engineered safety features and those plant protective systems which have been engineered into achieving the desired levels of safety. An additional method of helping to assure that those structures, systems, and components of importance to safety are prudently operated and adequately maintained is to assign the full safety responsibility for the overall operations of the reactor facility to the operating organization, i.e. assigning a 'line of responsibility' within the reactor facility operator. This assurance can be further strengthened by requiring that the facility operator establish a safety review body that overviews the operation and assures that the operating organization complies with those policies and practices of safe operation which have been imposed on the reactor facility. (author)

HySafe - The Network of Excellence for Hydrogen Safety

International Nuclear Information System (INIS)

Jordan, T.

2006-01-01

Safety always has been a critical issue for innovations as it influences the economic attractiveness and public acceptance of any new idea. Furthermore, a fair market for trading innovative products has to be based on homogenized legal regulations, which usually refer commonly accepted standards. Ideally, these standards should be the unique outcome of safety assessments, based on profound and concerted pre-normative research work. However, in Europe the research related to hydrogen safety is still fragmented. This was the reason for the European Commission to support the needed integration and focusing of the related efforts with the help of a new instrument, the so-called Networks of Excellence NoE. So, the goal of NoE HySafe is to provide the basis to facilitate the safe introduction of hydrogen as an energy carrier, by removing the described safety related obstacles. The network is constituted by 24 partners from 12 European countries and from Canada, representing private industries, especially from the automotive sector, universities and research institutions. More than 120 scientists perform integrative work in 15 work packages. A biennial report on Hydrogen Safety is going to be published, the available experimental facilities have been catalogued and qualified, educational programs are designed. After the first successful International Conference on Hydrogen Safety the second will be organized 2007 in San Sebastian, Spain. The European codes and standards activities will be supported by scientifically based information formulated in the HySafe position papers. The web-site www.hysafe.net offers a versatile platform for internal and external communication. The further work program is orientated not only at the results of a state-of-the-art report and a PIRT analysis performed within the NoE but also complies with the needs identified in the external network including other European projects related to hydrogen like StorHy, HyWays and NATURALHY. By shifting

Applied gis software for improving pedestrian & bicycle safety

Directory of Open Access Journals (Sweden)

H. Ziari

2005-08-01

Full Text Available People are important in towns. They are the foundation of the social and economic processes that drive the urban system and sustain the urban fabric. While people spend much of their time inside buildings – at home, at work, and at play – it is the movement of people, whether in vehicles or on foot, that is indicative of the vibrancy of the town. Comfort and safety are important for people movement. The crash data in cities, provinces started with the Traffic Organization of Inner Ministry looking at access management controls on functionally classified streets. Safety is a driving factor in access management and the crash reports are the best indicator of the lack of safe roads. This paper presents the development and findings of crash data from police reports and how they are being used in Geographic Information System (GIS. This tool generates a contour map identifying areas of high crash occurrence determined by crash density and clusters of crashes involving pedestrians or bicyclists. Summary statistics of the selected zones can be generated and displayed in a table or chart form.

FAST and SAFE Passive Safety Devices for Sodium-cooled Fast Reactor

Energy Technology Data Exchange (ETDEWEB)

Hartanto, Donny; Kim, Chihyung; Kim, In-Hyung; Kim, Yonghee [KAIST, Daejeon (Korea, Republic of)

2015-05-15

The major factor is the impact of the neutron spectral hardening. The second factor that affects the CVR is reduced capture by the coolant when the coolant voiding occurs. To improve the CVR, many ideas and concepts have been proposed, which include introduction of an internal blanket, spectrum softening, or increasing the neutron leakage. These ideas may reduce the CVR, but they deteriorate the neutron economy. Another potential solution is to adopt a passive safety injection device such as the ARC (autonomous reactivity control) system, which is still under development. In this paper, two new concepts of passive safety devices are proposed. The devices are called FAST (Floating Absorber for Safety at Transient) and SAFE (Static Absorber Feedback Equipment). Their purpose is to enhance the negative reactivity feedback originating from the coolant in fast reactors. SAFE is derived to balance the positive reactivity feedback due to sodium coolant temperature increases. It has been demonstrated that SAFE allows a low-leakage SFR to achieve a self-shutdown and self-controllability even though the generic coolant temperature coefficient is quite positive and the coolant void reactivity can be largely managed by the new FAST device. It is concluded that both FAST and SAFE devices will improve substantially the fast reactor safety and they deserve more detailed investigations.

Fail-safe logic elements for use with reactor safety systems

International Nuclear Information System (INIS)

Bobis, J.P.; McDowell, W.P.

1976-01-01

A complete fail-safe trip circuit is described which utilizes fail-safe logic elements. The logic elements used are analog multipliers and active bandpass filter networks. These elements perform Boolean operations on a set of AC signals from the output of a reactor safety-channel trip comparator

Safe-by-Design : from Safety to Responsibility

NARCIS (Netherlands)

van de Poel, I.R.; Robaey, Z.H.

2017-01-01

Safe-by-design (SbD) aims at addressing safety issues already during the R&D and design phases of new technologies. SbD has increasingly become popular in the last few years for addressing the risks of emerging technologies like nanotechnology and synthetic biology. We ask to what extent SbD

System Safety Program Plan for Project W-314, tank farm restoration and safe operations

International Nuclear Information System (INIS)

Boos, K.A.

1996-01-01

This System Safety Program Plan (SSPP) outlines the safety analysis strategy for project W-314, ''Tank Farm Restoration and Safe Operations.'' Project W-314 will provide capital improvements to Hanford's existing Tank Farm facilities, with particular emphasis on infrastructure systems supporting safe operation of the double-shell activities related to the project's conceptual Design Phase, but is planned to be updated and maintained as a ''living document'' throughout the life of the project to reflect the current safety analysis planning for the Tank Farm Restoration and Safe Operations upgrades. This approved W-314 SSPP provides the basis for preparation/approval of all safety analysis documentation needed to support the project

What Factors Explain Bicycling and Walking for Commuting by ELSA-Brasil Participants?

Science.gov (United States)

de Matos, Sheila Maria Alvim; Pitanga, Francisco José Gondim; Almeida, Maria da Conceição C; Queiroz, Ciro Oliveira; Dos Santos, Clarice Alves; de Almeida, Rogerio Tosta; da Silva, Ianne Tayrine Martins; Griep, Rosane Harter; Amorim, Leila Denise Alves Ferreira; Patrão, Ana Luísa; Aquino, Estela M L

2018-03-01

To analyze the factors associated with commuting by bicycling and walking in adult participants from ELSA-Brasil (Longitudinal Study of Adult Health). Cross-sectional. Six teaching/research institutions throughout Brazil. A total of 15 105 civil servants. Commuting by bicycling and walking was analyzed using the long-form International Physical Activity Questionnaire. A hierarchical model containing possible factors associated with commuting by bicycling and walking was constructed. Crude and adjusted odds ratios were calculated using multinomial logistic regression. Considering the 2 forms of commuting, 66% of the participants were being considered inactive or insufficiently active. In women, being "heavier," feeling unsafe practicing physical activity, and being a former smoker were factors negatively associated with commuting by bicycling and walking. In men, active commuting was less common among those who were overweight or had abdominal obesity, those with a negative perception of safety, and those reporting that there was nowhere suitable in the neighborhood to practice physical activity. Obesity and negative perceptions in the neighborhood are associated with inactive or insufficiently active commuting. The relevance of this finding for public health is reinforce developing policies aimed at promoting health in Brazil and in other countries with similar characteristics.

Bicycle safety in bicycle to car accidents

NARCIS (Netherlands)

Rodarius, C.; Mordaka, J.K.; Versmissen, A.C.M.

2008-01-01

Much attention is being paid to pedestrian safety by international working groups such as EEVC WG17, in research projects such as APROSYS (www.aprosys.com) and consumer organisations like Euro NCAP (www.euroncap.com). In addition legal requirements are in place, like the EU directive 2003/102/EC.

Integrated vehicle's lateral safety: the LATERAL SAFE experience

NARCIS (Netherlands)

Amditis, A.; Floudas, N.; Kaiser-Dieckhoff, U.; Hackbarth, T.; Broek, S.P. van den; Miglietta, M.; Danielson, L.; Gemou, M.; Bekiaris, E.

2008-01-01

The applications developed and the evaluation results of the EU funded automotive safety PReVENT IP subproject LATERAL SAFE are described. The data synthesis algorithms that aim at achieving a reliable representation of the objects and their kinematics, in the lateral and rear fields of the host

Bicycle Purchaser Training Workshop.

Science.gov (United States)

Schwarz, William

A course was developed to provide data to buyers of new bicycles so they could make an informed decision about their purchases. The instructional systems design process (analysis, design, development, implementation, and evaluation) was used to analyze the need for a training course on buying and fitting a bicycle. Information was collected…

76 FR 52046 - Final Policy Statement on the Eligibility of Pedestrian and Bicycle Improvements Under Federal...

Science.gov (United States)

2011-08-19

... important for pedestrian comfort and safety. The most successful and useful public transportation systems... could take light rail, a bus, or ride a bike.'' \\4\\ As the Secretary further described, ``livable...; (G) Eligible Activities; (H) Bicycle Sharing Programs; (I) Planning Issues; (J) Safety Concerns; (K...

Safety on the Job. Some Guidelines for Working Safely. Instructor's Edition.

Science.gov (United States)

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This teacher's guide was developed to help teachers (especially in Oklahoma) promote safe practices on the job. As a supplement to existing programs in the requirements for job safety, this book can also promote same basic safety attitudes and help support basic safety concepts, with an emphasis on accident prevention. The guide contains eight…

Bicycle urbanism as competitive advantage in the neoliberal age

DEFF Research Database (Denmark)

Ibsen, Mikkel Elkær; Olesen, Kristian

2018-01-01

In the light of the emergent ‘bicycle renaissance’ in the US, this paper analyses the rationale basis of bicycle role model, Portland’s promotion of bicycling. By conceptualizing bicycle promotion as a ‘travelling idea’, the paper discusses the key rationales and discourses structuring how bicycl...

Road accidents involving bicycles: configurations and injuries.

Science.gov (United States)

Orsi, Chiara; Montomoli, Cristina; Otte, Dietmar; Morandi, Anna

2017-12-01

This study analyzed the most common types of accident involving bicycles and compared the frequency of injuries. The data source was the database of German In-Depth Accident Study (GIDAS). Cases consist of bicycles and their riders involved in accidents between 2000 and 2010. In most collisions, the bicycle impacted with a car. The percentage of injured bicyclists was higher in collisions with a heavy vehicle and decreased when the bicycle impacted with lighter vehicles. A high percentage of injured bicyclists in single accidents was observed; the most severe injury was more frequently to head and extremities. Accidents involving a car and a bicycle with the right of way in a bicycle path represented about 20% of involved and injured bicyclists. The ten most frequent configurations represented about 60% of involved and injured bicyclists. These results contribute to understand the dangerous scenarios for bicyclists and to suggest preventive actions.

A fail-safe design for X-ray safety shutters

International Nuclear Information System (INIS)

Cramer, W.E.; Port, E.A.

1982-01-01

The purpose of any safety shutter device is to help minimize radiation exposure to personnel. Many such devices for analytical X-ray work may fail in a mode with great potential for injury. The authors present a design that may be used to modify any existing mechanical or electro-mechanical system that utilizes a gate which blocks an aperture to control exposure. The system is of 'fail-safe' design, as defined in the National Bureau of Standards Handbook 111 (American National Standards Institute, 1972); One in which all reasonable anticipated failures of indicator or safety components will cause the equipment to respond in a mode ensuring that personnel are safe from exposure to radiation. The system has visible indicators that make the user aware that a particular failure has occurred; in addition, X-ray generation ceases. (Auth.)

Comparative life cycle assessment of ghana-made bamboo-frame bicycle and conventional bicycles assembled and used in the Netherlands

NARCIS (Netherlands)

Agyekum, E.O.; Fortuin, K.P.J.; Harst, van der E.J.M.

2014-01-01

In order to assess the sustainability of bamboo-framed bicycles produced in Ghana, an environmental and social life cycle assessments (LCA) were performed. For the environmental LCA, a bamboo-frame bicycle was compared with aluminium- and steel-frame bicycles, focussing on processes related to the

Johnson Space Center's Free Range Bicycle Program.- Fall 2015 Intern Report

Science.gov (United States)

Lee-Stockton, Willem

2015-01-01

NASA's Johnson Space Center is a big place, encompassing 1,620 acres and more than a hundred buildings. Furthermore, there are reportedly 15 thousand employees, all of which have somewhere to be. To facilitate the movement of all these people JSC has historically relied on human power. Pedaling their way towards deep space, bicycles have been the go to method. Currently there are about 200 Free Range Bicycles at JSC. Free Range Bicycles belong to nobody, except NASA, and are available for anybody to use. They are not to be locked or hidden (although frequently are) and the intention is that there will always be a bike to hop on to get where you're going (although it may not be the bike you rode in on). Although not without its own shortcomings, the Free Range Bicycle Program has continued to provide low cost, simple transportation for NASA's JSC. In addition to the approximately 200 Free Range Bicycles, various larger divisions (like engineering) will often buy a few dozen bikes for their team members to use or individuals will bring their own personal bike to either commute or use on site. When these bicycles fall into disrepair or are abandoned (from retirees etc) they become a problem at JSC. They are an eye sore, create a safety hazard and make it harder to find a working bike in a time of need. The Free Range Program hopes to address this first problem by "tagging out" abandoned or out of service bicycles. A bright orange "DO NOT OPERATE" tag is placed on the bike and given a serial number for tracking purposes. See picture to the right. If the bike has an active owner with intentions to repair the bike the bottom of the tag has instructions for how to claim the abandoned bicycle. After being tagged the owner of the bicycle has 30 days to claim the bicycle and either haul it off site or get it repaired (and labeled) in accordance with Johnson's Bicycle Policy. If the abandoned bicycle is not claimed within 30 days it becomes the property of the Government. The

Occupational driver safety: conceptualising a leadership-based intervention to improve safe driving performance.

Science.gov (United States)

Newnam, Sharon; Lewis, Ioni; Watson, Barry

2012-03-01

Occupational driving crashes are the most common cause of death and injury in the workplace. The physical and psychological outcomes following injury are also very costly to organizations. Thus, safe driving poses a managerial challenge. Some research has attempted to address this issue through modifying discrete and often simple target behaviours (e.g., driver training programs). However, current intervention approaches in the occupational driving field generally consider the role of organizational factors in workplace safety. This study adopts the A-B-C framework to identify the contingencies associated with an effective exchange of safety information within the occupational driving context. Utilizing a sample of occupational drivers and their supervisors, this multi-level study examines the contingencies associated with the exchange of safety information within the supervisor-driver relationship. Safety values are identified as an antecedent of the safety information exchange, and the quality of the leader-member exchange relationship and safe driving performance is identified as the behavioural consequences. We also examine the function of role overload as a factor influencing the relationship between safety values and the safety information exchange. Hierarchical linear modelling found that role overload moderated the relationship between supervisors' perceptions of the value given to safety and the safety information exchange. A significant relationship was also found between the safety information exchange and the subsequent quality of the leader-member exchange relationship. Finally, the quality of the leader-member exchange relationship was found to be significantly associated with safe driving performance. Theoretical and practical implications of these results are discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

A Novel Electric Bicycle Battery Monitoring System Based on Android Client

Directory of Open Access Journals (Sweden)

Chuanxue Song

2017-01-01

Full Text Available The battery monitoring system (BMS plays a crucial role in maintaining the safe operation of the lithium battery electric bicycle and prolonging the life of the battery pack. This paper designed a set of new battery monitoring systems based on the Android system and ARM single-chip microcomputer to enable direct management of the lithium battery pack and convenient monitoring of the state of the battery pack. The BMS realizes the goal of monitoring the voltage, current, and ambient temperature of lithium batteries, estimating the state of charge (SOC and state of health (SOH, protecting the battery from abuse during charging or discharging, and ensuring the consistency of the batteries by integrating the passive equalization circuit. The BMS was proven effective and feasible through several tests, including charging/discharging, estimation accuracy, and communication tests. The results indicated that the BMS could be used in the design and application of the electric bicycle.

Bicycle traffic in urban areas

Directory of Open Access Journals (Sweden)

Anđelković Zorica

2015-01-01

Full Text Available Cycling is a term describing the use of bicycles, but also any mean of transport driven solely by human power. Development of bicycle traffic in urban areas involves construction of cycling infrastructure, adapting streets and other traffic infrastructure to a form suitable for cycling and other means of transport (individual motorized traffic, public transport, walking, ensuring the adequate budget and systematic planning and development of sustainable transport in cities. The paper presents basic settings and conditions as input elements to plan bicycle traffic in urban areas, as well as program- design conditions which lead the activities of planners and designers of urban roads in connection with cyclists.

Validity of instruments to assess students' travel and pedestrian safety

Directory of Open Access Journals (Sweden)

Baranowski Tom

2010-05-01

Full Text Available Abstract Background Safe Routes to School (SRTS programs are designed to make walking and bicycling to school safe and accessible for children. Despite their growing popularity, few validated measures exist for assessing important outcomes such as type of student transport or pedestrian safety behaviors. This research validated the SRTS school travel survey and a pedestrian safety behavior checklist. Methods Fourth grade students completed a brief written survey on how they got to school that day with set responses. Test-retest reliability was obtained 3-4 hours apart. Convergent validity of the SRTS travel survey was assessed by comparison to parents' report. For the measure of pedestrian safety behavior, 10 research assistants observed 29 students at a school intersection for completion of 8 selected pedestrian safety behaviors. Reliability was determined in two ways: correlations between the research assistants' ratings to that of the Principal Investigator (PI and intraclass correlations (ICC across research assistant ratings. Results The SRTS travel survey had high test-retest reliability (κ = 0.97, n = 96, p Conclusions These validated instruments can be used to assess SRTS programs. The pedestrian safety behavior checklist may benefit from further formative work.

Integrated vehicle’s lateral safety: the LATERAL SAFE experience

NARCIS (Netherlands)

Amditis, A.; Floudas, N.; Kaiser-Dieckhoff, U.; Hackbarth, T.; Broek, S.P. van den; Miglietta, M.; Danielson, L.; Gemou, M.; Bekiaris, E.

2008-01-01

The applications developed and the evaluation results of the EU funded automotive safety PReVENT IP subproject LATERAL SAFE are described. The data synthesis algorithms that aim at achieving a reliable representation of the objects and their kinematics, in the lateral and rear fields of the host

Bicycle Crashes

Data.gov (United States)

Town of Chapel Hill, North Carolina — This data set maps the locations of crashes involving bicyclists in the Chapel Hill Region of North Carolina.The data comes from police-reported bicycle-motor...

Getting home safe and sound: occupational safety and health administration at 38.

Science.gov (United States)

Silverstein, Michael

2008-03-01

The Occupational Safety and Health Act of 1970 (OSHAct) declared that every worker is entitled to safe and healthful working conditions, and that employers are responsible for work being free from all recognized hazards. Thirty-eight years after these assurances, however, it is difficult to find anyone who believes the promise of the OSHAct has been met. The persistence of preventable, life-threatening hazards at work is a failure to keep a national promise. I review the history of the Occupational Safety and Health Administration and propose measures to better ensure that those who go to work every day return home safe and sound. These measures fall into 6 areas: leverage and accountability, safety and health systems, employee rights, equal protection, framing, and infrastructure.

Making eco-friendly transportation safer: developing computer-based simulations to assess of the impacts of bicycle accident prevention interventions on healthcare utilization.

Science.gov (United States)

Juhra, Christian; Borycki, Elizabeth M; Kushniruk, Andre W; Anderson, Jim; Anderson, Marilyn

2011-01-01

Computer-based modeling and simulations are becoming increasingly used for applications in health and safety. In this paper we describe a multi-phase project aimed at modeling bicycle accidents in Munster, Germany. The work involved a first phase of collecting empirical data on accident rates and severity. In the second phase a computer-based simulation model of bicycle accidents was created, using data from phase one to identify relevant parameters in the model. Finally, initial results from running the model are described that will be used to inform decision making regarding safety initiatives.

Food Safety Posters for Safe Handling of Leafy Greens

Science.gov (United States)

Rajagopal, Lakshman; Arendt, Susan W.; Shaw, Angela M.; Strohbehn, Catherine H.; Sauer, Kevin L.

2016-01-01

This article describes food safety educational tools depicting safe handling of leafy greens that are available as downloadable posters to Extension educators and practitioners (www.extension.iastate.edu). Nine visual-based minimal-text colored posters in English, Chinese, and Spanish were developed for use when formally or informally educating…

The Effect of Sharrows, Painted Bicycle Lanes and Physically Protected Paths on the Severity of Bicycle Injuries Caused by Motor Vehicles.

Science.gov (United States)

Wall, Stephen P; Lee, David C; Frangos, Spiros G; Sethi, Monica; Heyer, Jessica H; Ayoung-Chee, Patricia; DiMaggio, Charles J

2016-01-01

We conducted individual and ecologic analyses of prospectively collected data from 839 injured bicyclists who collided with motorized vehicles and presented to Bellevue Hospital, an urban Level-1 trauma center in New York City, from December 2008 to August 2014. Variables included demographics, scene information, rider behaviors, bicycle route availability, and whether the collision occurred before the road segment was converted to a bicycle route. We used negative binomial modeling to assess the risk of injury occurrence following bicycle path or lane implementation. We dichotomized U.S. National Trauma Data Bank Injury Severity Scores (ISS) into none/mild (0-8) versus moderate, severe, or critical (>8) and used adjusted multivariable logistic regression to model the association of ISS with collision proximity to sharrows (i.e., bicycle lanes designated for sharing with cars), painted bicycle lanes, or physically protected paths. Negative binomial modeling of monthly counts, while adjusting for pedestrian activity, revealed that physically protected paths were associated with 23% fewer injuries. Painted bicycle lanes reduced injury risk by nearly 90% (IDR 0.09, 95% CI 0.02-0.33). Holding all else equal, compared to no bicycle route, a bicycle injury nearby sharrows was nearly twice as likely to be moderate, severe, or critical (adjusted odds ratio 1.94; 95% confidence interval (CI) 0.91-4.15). Painted bicycle lanes and physically protected paths were 1.52 (95% CI 0.85-2.71) and 1.66 (95% CI 0.85-3.22) times as likely to be associated with more than mild injury respectively.

The Effect of Sharrows, Painted Bicycle Lanes and Physically Protected Paths on the Severity of Bicycle Injuries Caused by Motor Vehicles

Directory of Open Access Journals (Sweden)

Stephen P. Wall

2016-12-01

Full Text Available We conducted individual and ecologic analyses of prospectively collected data from 839 injured bicyclists who collided with motorized vehicles and presented to Bellevue Hospital, an urban Level-1 trauma center in New York City, from December 2008 to August 2014. Variables included demographics, scene information, rider behaviors, bicycle route availability, and whether the collision occurred before the road segment was converted to a bicycle route. We used negative binomial modeling to assess the risk of injury occurrence following bicycle path or lane implementation. We dichotomized U.S. National Trauma Data Bank Injury Severity Scores (ISS into none/mild (0–8 versus moderate, severe, or critical (>8 and used adjusted multivariable logistic regression to model the association of ISS with collision proximity to sharrows (i.e., bicycle lanes designated for sharing with cars, painted bicycle lanes, or physically protected paths. Negative binomial modeling of monthly counts, while adjusting for pedestrian activity, revealed that physically protected paths were associated with 23% fewer injuries. Painted bicycle lanes reduced injury risk by nearly 90% (IDR 0.09, 95% CI 0.02–0.33. Holding all else equal, compared to no bicycle route, a bicycle injury nearby sharrows was nearly twice as likely to be moderate, severe, or critical (adjusted odds ratio 1.94; 95% confidence interval (CI 0.91–4.15. Painted bicycle lanes and physically protected paths were 1.52 (95% CI 0.85–2.71 and 1.66 (95% CI 0.85–3.22 times as likely to be associated with more than mild injury respectively.

Bicycle: a bioinformatics pipeline to analyze bisulfite sequencing data.

Science.gov (United States)

Graña, Osvaldo; López-Fernández, Hugo; Fdez-Riverola, Florentino; González Pisano, David; Glez-Peña, Daniel

2018-04-15

High-throughput sequencing of bisulfite-converted DNA is a technique used to measure DNA methylation levels. Although a considerable number of computational pipelines have been developed to analyze such data, none of them tackles all the peculiarities of the analysis together, revealing limitations that can force the user to manually perform additional steps needed for a complete processing of the data. This article presents bicycle, an integrated, flexible analysis pipeline for bisulfite sequencing data. Bicycle analyzes whole genome bisulfite sequencing data, targeted bisulfite sequencing data and hydroxymethylation data. To show how bicycle overtakes other available pipelines, we compared them on a defined number of features that are summarized in a table. We also tested bicycle with both simulated and real datasets, to show its level of performance, and compared it to different state-of-the-art methylation analysis pipelines. Bicycle is publicly available under GNU LGPL v3.0 license at http://www.sing-group.org/bicycle. Users can also download a customized Ubuntu LiveCD including bicycle and other bisulfite sequencing data pipelines compared here. In addition, a docker image with bicycle and its dependencies, which allows a straightforward use of bicycle in any platform (e.g. Linux, OS X or Windows), is also available. ograna@cnio.es or dgpena@uvigo.es. Supplementary data are available at Bioinformatics online.

Investigation of Influential Factors for Bicycle Crashes Using a Spatiotemporal Model

Science.gov (United States)

Gill, G.; Sakrani, T.; Cheng, W.; Zhou, J.

2017-09-01

Despite the numerous potential advantages of indulging in bicycling, such as elevation of health and environment along with mitigation of congestion, the cyclists are a vulnerable group of commuters which is exposed to safety risks. This study aims to investigate the explanatory variables at transportation planning level which have a significant impact on the bicycle crashes. To account for the serial changes around the built environment, the linear time trend as well as time-varying coefficients are utilized for the covariates. These model modifications help account for the variations in the environment which may escape the incorporated variables due to lack of robustness in data. Also, to incorporate the interaction of roadway, demographic, and socioeconomic features within a Traffic Analysis Zone (TAZ), with the bicycle crashes of that area, a spatial correlation is integrated. This spatial correlation accounts for the spatially structured random effects which capture the unobserved heterogeneity and add towards building more comprehensive model with relatively precise estimates. Two different age groups, the student population in the TAZs, the presence of arterial roads and bike lanes, were observed to be statistically significant variables related with bicycle crashes. These observations will guide the transportation planning organizations which focus on the entity of TAZ while developing policies. The results of the current study establish a quantifies relationship between the significant factors and the crash count which will enable the planners to choose the most cost-efficient, yet most productive, factors which needs to be addressed for mitigation of crashes.

Safe patient care - safety culture and risk management in otorhinolaryngology.

Science.gov (United States)

St Pierre, Michael

2013-12-13

Safety culture is positioned at the heart of an organization's vulnerability to error because of its role in framing organizational awareness to risk and in providing and sustaining effective strategies of risk management. Safety related attitudes of leadership and management play a crucial role in the development of a mature safety culture ("top-down process"). A type marker for organizational culture and thus a predictor for an organization's maturity in respect to safety is information flow and in particular an organization's general way of coping with information that suggests anomaly. As all values and beliefs, relationships, learning, and other aspects of organizational safety culture are about sharing and processing information, safety culture has been termed "informed culture". An informed culture is free of blame and open for information provided by incidents. "Incident reporting systems" are the backbone of a reporting culture, where good information flow is likely to support and encourage other kinds of cooperative behavior, such as problem solving, innovation, and inter-departmental bridging. Another facet of an informed culture is the free flow of information during perioperative patient care. The World Health Organization's safe surgery checklist" is the most prevalent example of a standardized information exchange aimed at preventing patient harm due to information deficit. In routine tasks mandatory standard operating procedures have gained widespread acceptance in guaranteeing the highest possible process quality. Technical and non-technical skills of healthcare professionals are the decisive human resource for an efficient and safe delivery of patient care and the avoidance of errors. The systematic enhancement of staff qualification by providing training opportunities can be a major investment in patient safety. In recent years several otorhinolaryngology departments have started to incorporate stimulation based team trainings into their

[Safe patient care: safety culture and risk management in otorhinolaryngology].

Science.gov (United States)

St Pierre, M

2013-04-01

Safety culture is positioned at the heart of an organisation's vulnerability to error because of its role in framing organizational awareness to risk and in providing and sustaining effective strategies of risk management. Safety related attitudes of leadership and management play a crucial role in the development of a mature safety culture ("top-down process"). A type marker for organizational culture and thus a predictor for an organizations maturity in respect to safety is information flow and in particular an organization's general way of coping with information that suggests anomaly. As all values and beliefs, relationships, learning, and other aspects of organizational safety culture are about sharing and processing information, safety culture has been termed "informed culture". An informed culture is free of blame and open for information provided by incidents. "Incident reporting systems" are the backbone of a reporting culture, where good information flow is likely to support and encourage other kinds of cooperative behavior, such as problem solving, innovation, and inter-departmental bridging. Another facet of an informed culture is the free flow of information during perioperative patient care. The World Health Organisation's "safe surgery checklist" is the most prevalent example of a standardized information exchange aimed at preventing patient harm due to information deficit. In routine tasks mandatory standard operating procedures have gained widespread acceptance in guaranteeing the highest possible process quality.Technical and non-technical skills of healthcare professionals are the decisive human resource for an efficient and safe delivery of patient care and the avoidance of errors. The systematic enhancement of staff qualification by providing training opportunities can be a major investment in patient safety. In recent years several otorhinolaryngology departments have started to incorporate simulation based team trainings into their curriculum

A Study for Adjustable Riding Position of the Innovation Bicycle Design

Science.gov (United States)

Huang, Yu-Che; Huang, Tai-Shen

2018-04-01

This research is about the analysis and design of the user in a wheelchair use posture can be changed. So user can through different sitting posture changes to provide different needs, so the folding design patents for the existing data collection and classification, through the analysis of advantages and disadvantages, further to find the innovative design approach. Finally through the multi linkage mechanism system, change the seat, handlebars and rear position, provide different posture context. In order to reduce the cost, this study is designed to integrate the innovation input mechanism, multi linkage system, through the construction of 10 joints and degrees of freedom of the bicycle frame. Then use 3D software to design of bicycle the size of the frame of innovation, through the three-dimensional CAD model to simulate the mechanism between movement and interference, and to evaluate the 3D The virtual prototype can meet the requirement. It will also enable CAE to analyze and determine the strength and the safety of the bicycle frame structure of ANSYS11.0 stress. Finally, we have integrated design through CAID to make a product appearance, the focus of research is mainly a study of CAD, CAE, CAID integration the production and the completion of a prototype.

BICYCLE HELMET DESIGN AND THE VIRTUAL VALIDATION OF THE IMPACT, AERODYNAMICS AND PRODUCTION PROCESS

Directory of Open Access Journals (Sweden)

Bojan Boshevski

2017-12-01

Full Text Available This paper presents the development process of a bicycle helmet through individual research, creation, presentation and analysis of the results of the most important product development stages. The quality of the development and manufacturing process of the protective equipment for extreme sports is an imperative for a successful product and its flawless function. The design of the bicycle helmet is made following the rules of the design in order to create a well-founded and functional product. After creating design sketches, a virtual prototype was developed in "SolidWorks" using the required ergonomic dimensions. 3D printed model of the human head with adapted ergonomic dimensions and the designed bicycle helmet was developed in order to verify the applied ergonomic measures. The virtual model will be used as an input in the finite element analysis of the helmet impact test based on the EN1078 standard and the aerodynamic simulations executed in "SolidWorks Simulation and Flow Simulation", for verification of the impact and aerodynamic properties. Virtual testing of aerodynamic features and the ability of the bicycle helmet to allow ventilation of the user's head indicate that the helmet performs its function in the desired way. Also, the virtual prototype will be used for the production process simulation in "SolidWorks Plastics" in order to analyze the production of the bicycle helmet. The polycarbonate helmet outer shell is subject to a number of simulations for the sake of analyzing the production process in order to obtain the desired characteristics of the polycarbonate outer shell and to avoid the disadvantages that occur in the manufacturing process. The main goal of this paper is to develop a safety bicycle helmet with improved ergonomic, validation of impact, aerodynamic characteristics and production process in order to produce a high quality product for mass use.

Electric bicycles in The Netherlands: Current developments and future possibilities

NARCIS (Netherlands)

Rooijen, T. van

2010-01-01

Developments with electric bicycles in the Netherlands are progressing rapidly. The number of electric bicycles sold is rises every year. Cycling is a very popular mode of transport in The Netherlands. In 2008 more than one million bicycles were sold. At the moment one out of ten bicycles sold is

Aging road user, bicyclist, and pedestrian safety : effective bicycling signs and preventing left-turn crashes.

Science.gov (United States)

2013-09-01

Task 1 of this report drivers' knowledge of various bicycle warning signs and pavement markings were assessed. In general knowledge was high. Share the Road and Three Foot Minimum signs were generally more quickly understood and recognized in version...

Structural design of a composite bicycle fork

International Nuclear Information System (INIS)

Baldissera, Paolo; Delprete, Cristiana

2014-01-01

Highlights: • Case study about composite bicycle fork design. • Special requirements for a Student Team project. • FE model to evaluate stiffness, strength and potential failure modes. • Comparison of two manufacturing approaches. • FE model stiffness validation on the manufactured fork. - Abstract: Despite the wide literature on the mechanical behaviour of carbon/epoxy composites, it is rare to find practical methodological approaches in finite element design of structural components made by laminate layup. Through the case study of a special bicycle fork needed in a Student Team prototype, this paper proposes a simplified methodology as starting point for educational and manufacturing purposes. In order to compare two manufacturing solutions in terms of stiffness, strength and failure mode, a numerical model was implemented. Since the project requirements imposed to avoid standard destructive testing, the model validation was based on a posteriori linear stiffness comparison with the manufactured component. The slight discrepancies between experimental and numerical results were discussed in order to check their origin and to assess the reliability of the model. The overall methodology, even if complain with only a part of the safety standard requirements, shows to be reliable enough and can be the basis for further extension and refinement

In-depth analysis of bicycle hydraulic disc brakes

Science.gov (United States)

Maier, Oliver; Györfi, Benedikt; Wrede, Jürgen; Arnold, Timo; Moia, Alessandro

2017-10-01

Hydraulic Disc Brakes (HDBs) represent the most recent and innovative bicycle braking system. Especially Electric Bicycles (EBs), which are becoming more and more popular, are equipped with this powerful, unaffected by environmental influences, and low-wear type of brakes. As a consequence of the high braking performance, typical bicycle braking errors lead to more serious accidents. This is the starting point for the development of a Braking Dynamics Assistance system (BDA) to prevent front wheel lockup and nose-over (falling over the handlebars). One of the essential prerequisites for the system design is a better understanding of bicycle HDBs' characteristics. A physical simulation model and a test bench have been built for this purpose. The results of the virtual and real experiments conducted show a high correlation and allow valuable insights into HDBs on bicycles, which have not been studied scientifically in any depth so far.

Anaerobic Degradation of Bicyclic Monoterpenes in Castellaniella defragrans

Directory of Open Access Journals (Sweden)

Edinson Puentes-Cala

2018-02-01

Full Text Available The microbial degradation pathways of bicyclic monoterpenes contain unknown enzymes for carbon–carbon cleavages. Such enzymes may also be present in the betaproteobacterium Castellaniella defragrans, a model organism to study the anaerobic monoterpene degradation. In this study, a deletion mutant strain missing the first enzyme of the monocyclic monoterpene pathway transformed cometabolically the bicyclics sabinene, 3-carene and α-pinene into several monocyclic monoterpenes and traces of cyclic monoterpene alcohols. Proteomes of cells grown on bicyclic monoterpenes resembled the proteomes of cells grown on monocyclic monoterpenes. Many transposon mutants unable to grow on bicyclic monoterpenes contained inactivated genes of the monocyclic monoterpene pathway. These observations suggest that the monocyclic degradation pathway is used to metabolize bicyclic monoterpenes. The initial step in the degradation is a decyclization (ring-opening reaction yielding monocyclic monoterpenes, which can be considered as a reverse reaction of the olefin cyclization of polyenes.

An international review of the frequency of single-bicycle crashes (SBCs) and their relation to bicycle modal share

DEFF Research Database (Denmark)

Schepers, Paul; Agerholm, Niels; Amoros, Emmanuelle

2015-01-01

of SBC casualties among the total number of road crash casualties increases proportionally less than the increase in bicycle modal share. Conclusions While most fatal injuries among cyclists are due to motor vehicle–bicycle crashes, most hospital admissions and emergency department attendances result...

Statewide analysis of bicycle crashes : [project summary].

Science.gov (United States)

2017-06-01

An extensive literature review was conducted to locate existing studies in four areas: (1) risk factors that affect the frequency and severity of bicycle crashes; (2) bicycle crash causes, patterns, and contributing factors; (3) network screening met...

An empirical tool to evaluate the safety of cyclists: Community based, macro-level collision prediction models using negative binomial regression.

Science.gov (United States)

Wei, Feng; Lovegrove, Gordon

2013-12-01

Today, North American governments are more willing to consider compact neighborhoods with increased use of sustainable transportation modes. Bicycling, one of the most effective modes for short trips with distances less than 5km is being encouraged. However, as vulnerable road users (VRUs), cyclists are more likely to be injured when involved in collisions. In order to create a safe road environment for them, evaluating cyclists' road safety at a macro level in a proactive way is necessary. In this paper, different generalized linear regression methods for collision prediction model (CPM) development are reviewed and previous studies on micro-level and macro-level bicycle-related CPMs are summarized. On the basis of insights gained in the exploration stage, this paper also reports on efforts to develop negative binomial models for bicycle-auto collisions at a community-based, macro-level. Data came from the Central Okanagan Regional District (CORD), of British Columbia, Canada. The model results revealed two types of statistical associations between collisions and each explanatory variable: (1) An increase in bicycle-auto collisions is associated with an increase in total lane kilometers (TLKM), bicycle lane kilometers (BLKM), bus stops (BS), traffic signals (SIG), intersection density (INTD), and arterial-local intersection percentage (IALP). (2) A decrease in bicycle collisions was found to be associated with an increase in the number of drive commuters (DRIVE), and in the percentage of drive commuters (DRP). These results support our hypothesis that in North America, with its current low levels of bicycle use (macro-level CPMs. Copyright © 2012. Published by Elsevier Ltd.

The environmental benefits of bicycling and walking.

Science.gov (United States)

1993-01-01

Bicycling and walking are the two major non-fuel-consuming, non-polluting : forms of transportation in the United States. Millions of Americans ride : bicycles and/or walk for a wide variety of purposes --- commuting to work, as : part of their job, ...

Severe bicycling injury risk factors in children and adolescents: a case-control study.

Science.gov (United States)

Hagel, Brent E; Romanow, Nicole T R; Enns, Nancy; Williamson, Jacqueline; Rowe, Brian H

2015-05-01

Bicycling is the most common cause of sports and recreation injury in children and adolescents; yet, there is limited evidence on the factors associated with severe bicycling injuries in youth. Case-control study of injured bicyclists less than 18 years old seen in seven emergency departments (EDs) from May 2008 to October 2010. Cases were bicyclists hospitalized after their ED visit (severe injury). Controls were bicyclists seen and discharged from the ED (non-severe injury). Personal, environmental, and crash characteristics were collected by interview. Injury data were collected from medical charts. Crude and adjusted odds ratios (ORs) and 95% confidence intervals (CIs) from logistic regression were used to estimate the odds of hospitalization associated with risk factors. Multiple imputation techniques were employed to address missing data. There were 1470 participants including 119 cases. Those ages 13-17 had the highest proportion (23%) of severe injuries resulting from motor vehicle [MV] collision. In models including age, sex and MV collision, being male (OR: 2.02; 95% CI: 1.21-3.38), not wearing a helmet (OR: 2.18; 95% CI: 1.43-3.31) and MV collision (OR: 3.91; 95% CI: 2.26-6.78) were significant risk factors for severe injury. Riding on a paved surface (OR: 0.63; 95% CI: 0.41-0.97) and utilitarian (school, work) bicycling (OR: 0.44; 95% CI: 0.2-0.94) decreased injury risk. Results were similar, apart from utilitarian bicycling (OR: 0.49; 95% CI: 0.22-1.06), after imputation for missing data. Bicycle-MV collisions increase severe injury risk in youth, and adolescents are often injured in these events. This suggests separating bicyclists from MVs or traffic calming strategies could improve safety. Copyright © 2015 Elsevier Ltd. All rights reserved.

Revitalization of Cycling in a Former Bicycle Kingdom: Beijing

DEFF Research Database (Denmark)

Zhao, Chunli; Carstensen, Trine Agervig; Olafsson, Anton Stahl

This paper scrutinizes and analyses the relevant historical policy documents chronologically - from the 1960s to the present - in order to figure out the potentials of revitalizing the bicycle mode share in Beijing. Firstly, we targeted two top-drawer conflicts of the bicycle use, which are travel......- or commuting distance and motorised vehicle-oriented urban development. Secondly, we analysed how the various related policies resulted in the changing landscape of the bicycle mode share, including increasing in the bicycle mode share, created the conflicts and declined the bicycle mode share. The results...... are revealed by collection and analysis of historical material and interviews with key stakeholders. The historical material is obtained from libraries, online resources, and reports from professionals including urban designers, transportation engineers, research centres and politicians of the Beijing...

Evaluation electric bicycles; Evaluation velos electriques

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-10-01

Leovelo service is the first measure in favor of the bicycle to control the air pollution and to conserve energy. It provides in the city of Clermont-Ferrand (France) a service of bicycle hiring. This document evaluates the project after two years of operating. It provides a technical evaluation (maintenance, equipment, financing) and also the socio-economic impacts. (A.L.B.)

Cool and Safe: Multiplicity in Safe Innovation at Unilever

Science.gov (United States)

Penders, Bart

2011-01-01

This article presents the making of a safe innovation: the application of ice structuring protein (ISP) in edible ices. It argues that safety is not the absence of risk but is an active accomplishment; innovations are not "made safe afterward" but "safe innovations are made". Furthermore, there are multiple safeties to be accomplished in the…

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-10-15

The IAEA's Statute authorizes the Agency to 'establish or adopt... standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements

International Nuclear Information System (INIS)

2012-01-01

The IAEA's Statute authorizes the Agency to 'establish or adopt... standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the

Proceedings of the conference on the Safety in Reactor Operations - TopSafe 2012 Transactions

International Nuclear Information System (INIS)

2012-01-01

TopSafe 2012 provides a forum for addressing the current status and future perspectives with regards to safety at nuclear installations worldwide. In view of the on-going discussions and initiatives that have been taken over the last months the European Nuclear Society (ENS) decided organising this edition of this topical conference from 22 to 26 April 2012 in Helsinki, Finland. TopSafe 2012 focus on three main subjects: Safety and related analyses in operating nuclear power plants and other nuclear installations; Safety and Risk Assessment; Trends in nuclear safety for existing and future installations. The conference is directed at a broad range of experts in the area of nuclear safety, including professionals from the different disciplines involved in the safety of nuclear power plants, fuel cycle installations and research reactors. It is aimed at professionals coming from the research organisations, universities, vendors, operators, regulatory bodies as well as policy makers. Top level representatives of the Countries that are constructing new nuclear power plants are invited. Regulators of all individual Countries with nuclear programme are expected to contribute the Conference. (authors)

Finding the Speed of a Bicycle in Circular Motion by Measuring the Lean Angle of the Bicycle

Science.gov (United States)

Ben-Abu, Yuval; Wolfson, Ira; Yizhaq, Hezi

2018-01-01

We suggest an activity for measuring the speed of a bicycle going in circular motion by measuring the bicycle's lean angle. In this activity students will be able to feel the strength that is being activated on their bodies while they are moving in circular motion. They will also understand that it is impossible to ride in a circle without the…

Effects of the Smartphone Application "Safe Patients" on Knowledge of Patient Safety Issues Among Surgical Patients.

Science.gov (United States)

Cho, Sumi; Lee, Eunjoo

2017-12-01

Recently, the patient's role in preventing adverse events has been emphasized. Patients who are more knowledgeable about safety issues are more likely to engage in safety initiatives. Therefore, nurses need to develop techniques and tools that increase patients' knowledge in preventing adverse events. For this reason, an educational smartphone application for patient safety called "Safe Patients" was developed through an iterative process involving a literature review, expert consultations, and pilot testing of the application. To determine the effect of "Safe Patients," it was implemented for patients in surgical units in a tertiary hospital in South Korea. The change in patients' knowledge about patient safety was measured using seven true/false questions developed in this study. A one-group pretest and posttest design was used, and a total of 123 of 190 possible participants were tested. The percentage of correct answers significantly increased from 64.5% to 75.8% (P effectively improve patients' knowledge of safety issues. This will ultimately empower patients to engage in safe practices and prevent adverse events related to surgery.

Cyclists' attitudes toward policies encouraging bicycle travel: findings from the Taupo Bicycle Study in New Zealand.

Science.gov (United States)

Tin Tin, Sandar; Woodward, Alistair; Thornley, Simon; Langley, John; Rodgers, Anthony; Ameratunga, Shanthi

2010-03-01

Utility cycling provides substantial health, environmental and economic benefits. Despite a favourable trend in leisure-time cycling, cycling is infrequently used for everyday travel needs in New Zealand. This study investigated cyclists' attitudes toward environmental and policy measures that would encourage them to cycle more, particularly for a trip to work. A cross-sectional analysis was undertaken using baseline data obtained from the Taupo Bicycle Study, a web-based longitudinal study. The study population comprised 2469 cyclists, aged 16 years or over, who had enrolled in the 2006 Wattyl Lake Taupo Cycle Challenge. The majority (88%) reported the provision of bicycle lanes as an important factor that would encourage them to cycle more often, followed by bicycle paths (76%), better bicycle security (64%), reduced motor vehicle speed (55%) and bike friendly public transport (38%). Of those who reported travelling to work at least once a week (N = 2223), varying proportions reported shower facilities at work (61%), fewer difficult intersections (43%), rising fuel costs (41%), fewer car parks (27%), bike designed to commute (26%) and rising cost of car parking (25%) as important factors that would encourage them to cycle to work more often. There were important differences in these perceived influences defined by the participants' socio-demographic characteristics and current cycling habits.

A positive view on road safety: Can 'car karma' contribute to safe driving styles?

Science.gov (United States)

Kleisen, Lucienne M B

2013-01-01

Many studies in the field of road safety are occupied with studying road unsafety since it generally concentrates on traffic crashes, crash, risk, and aberrant driving behaviour, especially in relation to young drivers. However, this study shows there is scope for thinking about driving and driver training from a different vantage point, that is in terms of safe or normal driving. The findings are reported from four group interviews with young drivers (18-25 years of age); the young drivers discussed their ideas of safe driving and their reasons for using (or not using) safe driving styles. The data show a type of optimistic thinking among young drivers which they call 'car karma'. This finding offers an opportunity to reconceptualise driving in a way that is focused on normal, safe driving styles, a topic that has received less attention in the past. The paper argues that greater focus on safe driving styles could be more conducive to young drivers actually driving safely than focusing on, for instance, crashes, which on an individual level are relatively rare (Elander et al., 1993, p. 277). Based on empirical research, the first positively stated definition of road safety is proposed based on the notion of 'car karma'. Copyright © 2012 Elsevier Ltd. All rights reserved.

Vision-Based Bicycle Detection Using Multiscale Block Local Binary Pattern

Directory of Open Access Journals (Sweden)

Hongyu Hu

2014-01-01

Full Text Available Bicycle traffic has heavy proportion among all travel modes in some developing countries, which is crucial for urban traffic control and management as well as facility design. This paper proposes a real-time multiple bicycle detection algorithm based on video. At first, an effective feature called multiscale block local binary pattern (MBLBP is extracted for representing the moving object, which is a well-classified feature to distinguish between bicycles and nonbicycles; then, a cascaded bicycle classifier trained by AdaBoost algorithm is proposed, which has a good computation efficiency. Finally, the method is tested with video sequence captured from the real-world traffic scenario. The bicycles in the test scenario are successfully detected.

A report on developing a checklist to assess company plans focused on improving safety awareness, safe behaviour and safety culture: final report

NARCIS (Netherlands)

Steijger, N.; Starren, H.; Keus, M.; Gort, J.; Vervoort, M.

2003-01-01

This report describes the process of developing a checklist to asses company plans focused on improving safety awareness, safe behaviour and safety culture. These plans are part of a programme initiated by the Ministry of Social Affairs and Employment aiming at improving the safety performance of

Safety aspect of long-life small safe power reactors

International Nuclear Information System (INIS)

Zaki, S.; Sekimoto, H.

1995-01-01

Safety aspects of several design options of long-life small safe fast power reactors using nitride fuel and lead-bismuth as coolant are discussed. In the present study hypothetical accidents are simulated for these reactors, i.e., unprotected simultaneous ULOF (total loss of primary pumping system) and UTOP (rod run out transient over power) accidents, caused by the simultaneous withdrawal of all control rods. The proposed designs have some important safety characteristics as low reactivity swing (only 0.2-0.25$), and negative coolant void coefficient over whole burnup period. Effectively negative value of all components of reactivity during an accident is observed. The safety performances of the balance, pancake, and tall slender type of core, each of them satisfy reactivity and negative coolant void coefficient constraint, against the above accident are compared. The simulation results show that all of the design options can survive the above accidents without the help of reactor scram and without the need of operator actions. (author)

Bicyclic peptide inhibitor of urokinase-type plasminogen activator

DEFF Research Database (Denmark)

Roodbeen, Renée; Jensen, Berit Paaske; Jiang, Longguang

2013-01-01

The development of protease inhibitors for pharmacological intervention has taken a new turn with the use of peptide-based inhibitors. Here, we report the rational design of bicyclic peptide inhibitors of the serine protease urokinase-type plasminogen activator (uPA), based on the established...... investigated the solution structures of the bicyclic peptide by NMR spectroscopy to map possible conformations. An X-ray structure of the bicyclic-peptide-uPA complex confirmed an interaction similar to that for the previous upain-1/upain-2-uPA complexes. These physical studies of the peptide...

The relationship between bicycle commuting and perceived stress: a cross-sectional study.

Science.gov (United States)

Avila-Palencia, Ione; de Nazelle, Audrey; Cole-Hunter, Tom; Donaire-Gonzalez, David; Jerrett, Michael; Rodriguez, Daniel A; Nieuwenhuijsen, Mark J

2017-06-23

Active commuting - walking and bicycling for travel to and/or from work or educational addresses - may facilitate daily, routine physical activity. Several studies have investigated the relationship between active commuting and commuting stress; however, there are no studies examining the relationship between solely bicycle commuting and perceived stress, or studies that account for environmental determinants of bicycle commuting and stress. The current study evaluated the relationship between bicycle commuting, among working or studying adults in a dense urban setting, and perceived stress. A cross-sectional study was performed with 788 adults who regularly travelled to work or study locations (excluding those who only commuted on foot) in Barcelona, Spain. Participants responded to a comprehensive telephone survey concerning their travel behaviour from June 2011 through to May 2012. Participants were categorised as either bicycle commuters or non-bicycle commuters, and (based on the Perceived Stress Scale, PSS-4) as either stressed or non-stressed. Multivariate Poisson regression with robust variance models of stress status based on exposures with bicycle commuting were estimated and adjusted for potential confounders. Bicycle commuters had significantly lower risk of being stressed than non-bicycle commuters (Relative Risk; RR (95% CI)=0.73 (0.60 to 0.89), p=0.001). Bicycle commuters who bicycled 4 days per week (RR (95% CI)=0.42 (0.24 to 0.73), p=0.002) and those who bicycled 5 or more days per week (RR (95% CI)=0.57 (0.42 to 0.77), pstressed than those who bicycled less than 4 days. This relationship remained statistically significant after adjusting for individual and environmental confounders and when using different cut-offs of perceived stress. Stress reduction may be an important consequence of routine bicycle use and should be considered by decision makers as another potential benefit of its promotion. © Article author(s) (or their employer

Butchers and Bicycles

DEFF Research Database (Denmark)

Kahle, Lynn; Eriksen, Steen Mandsfelt

2016-01-01

Morten Wagener is a Danish design, and innovator who founded the cargo and personal transportation bicycle company, ”Butchers and Bicycles,”. He identified a business opportunity to improve the future of urban transport. His idea was that most of the trikes) on the market lacked good design......, maneuverability and styling. With his engineering and design background, Wagener set out to design a new trike; which would meet the needs of the target market, which his research identified as well- educated individuals who were very interested in aesthetics. Furthermore, Wagener was convinced that trikes were...... between order and delivery. From a marketing perspective, one of the differentiating factors of Morten’s product is the quality of the ride (compared to competing products) and so his marketing team coined the slogan “Built-to-Tilt” because even though it’s a trike it feels like riding a two...

Keeping nurse researchers safe: workplace health and safety issues.

Science.gov (United States)

Barr, Jennieffer; Welch, Anthony

2012-07-01

This article is a report of a qualitative study of workplace health and safety issues in nursing research. Researcher health and safety have become increasing concerns as there is an increased amount of research undertaken in the community and yet there is a lack of appropriate guidelines on how to keep researchers safe when undertaking fieldwork. This study employed a descriptive qualitative approach, using different sources of data to find any references to researcher health and safety issues. A simple descriptive approach to inquiry was used for this study. Three approaches to data collection were used: interviews with 15 researchers, audits of 18 ethics applications, and exploration of the literature between 1992 and 2010 for examples of researcher safety issues. Data analysis from the three approaches identified participant comments, narrative descriptions or statements focused on researcher health and safety. Nurse researchers' health and safety may be at risk when conducting research in the community. Particular concern involves conducting sensitive research where researchers are physically at risk of being harmed, or being exposed to the development of somatic symptoms. Nurse researchers may perceive the level of risk of harm as lower than the actual or potential harm present in research. Nurse researchers do not consistently implement risk assessment before and during research. Researcher health and safety should be carefully considered at all stages of the research process. Research focusing on sensitive data and vulnerable populations need to consider risk minimization through strategies such as appropriate researcher preparation, safety during data collection, and debriefing if required. © 2012 Blackwell Publishing Ltd.

A study on electric bicycle energy efficiency

Directory of Open Access Journals (Sweden)

Ivan EVTIMOV

2015-09-01

Full Text Available The paper presents a construction of an experimental electric bicycle for evaluation of the energy efficiency. The bicycle is equipped with onboard computer which can store the information about motion and energy consumption. The result concerning power, energy consumption, recharging during brake process, etc. are given. Energy consumption for 3 typical city routes is studied.

The spatio-temporal Development of Copenhagen's bicycle infrastructure 1912-2013

DEFF Research Database (Denmark)

Carstensen, Trine Agervig; Olafsson, Anton Stahl; Bech, Nynne Marie

2015-01-01

Cycling plays an important role in low-carbon transitions. Around the globe, cities are constructing bicycle infrastructure. The city of Copenhagen has a bicycle-friendly infrastructure celebrated for its fine-meshed network. This study documents the spatio-temporal development of Copenhagen......’s bicycle infrastructure and explores how the development corresponds to other processes of urban transformation. The study builds on historical maps of bicycle infrastructure that are digitised into geographical information, which allows for a comprehensive analysis of the formation of the network....... In search for identifying drivers, the study analyses the city’s spatial growth pattern, migration pattern, development of road network and changes in the transport culture. Analyses reveal that the bicycle infrastructure expanded at a relatively constant pace during distinct periods of urban transformation...

Safe Use of Pesticides, Guidelines. Occupational Safety and Health Series No. 38.

Science.gov (United States)

International Labour Office, Geneva (Switzerland).

This document provides guidance on the safe use of pesticides in agricultural work. General principles are given and followed by more detailed safety requirements for the various pesticide application techniques. Finally, the medical aspects of pesticides are considered. (BB)

Finding the speed of a bicycle in circular motion by measuring the lean angle of the bicycle

Science.gov (United States)

Ben-Abu, Yuval; Wolfson, Ira; Yizhaq, Hezi

2018-05-01

We suggest an activity for measuring the speed of a bicycle going in circular motion by measuring the bicycle’s lean angle. In this activity students will be able to feel the strength that is being activated on their bodies while they are moving in circular motion. They will also understand that it is impossible to ride in a circle without the bicycle leaning at an angle, an action that is performed intuitively.

Synthetic strategy for bicyclic tetrapeptides HDAC inhibitors using ...

Indian Academy of Sciences (India)

Cyclic peptides show diverse biological activities and are considered as good therapeutic agents due to structural rigidity, receptor selectivity and biochemical stability. We have developed bicyclic tetrapeptide HDAC inhibitors based on different cyclic tetrapeptide scaffolds. For the synthesis of these bicyclic tetrapeptides, ...

Project SAFE. Update of the SFR-1 safety assessment. Phase 1

International Nuclear Information System (INIS)

Andersson, Johan; Riggare, P.; Skagius, K.

1998-10-01

SFR-1 is a facility for disposal of low-level radioactive operational waste from the nuclear power plants in Sweden. Low-level radioactive waste from industry, medicine, and research is also disposed in SFR-1. The facility is situated in bedrock beneath the Baltic Sea, 1 km off the coast near the Forsmark nuclear power plant. SFR-1 was built between the years 1983 and 1988. An assessment of the long-term performance of the facility was included in the vast documentation that was a part of the application for an operational license. The assessment was presented in the form of a final safety report. In the operational licence for SFR-1 it is stated that renewed safety assessments should be carried out at least each ten years. In order to meet this demand SKB has launched a special project, SAFE (Safety Assessment of Final Disposal of Operational Radioactive Waste). The aim of the project is to update the safety analysis and to prepare a safety report that will be presented to the Swedish authorities not later than year 2000. Project SAFE is divided into three phases. The first phase is a prestudy, and the results of the prestudy are given in this report. The aim of the prestudy is to identify issues where additional studies would improve the basis for the updated safety analysis as well as to suggest how these studies should be carried out. The work has been divided into six different topics, namely the inventory, the near field, the far field, the biosphere, radionuclide transport calculations and scenarios. For each topic the former safety reports and regulatory reviews are scrutinised and needs for additional work is identified. The evaluations are given in appendices covering the respective topics. The main report is a summary of the appendices with a more stringent description of the repository system and the processes that are of interest and therefore should be addressed in an updated safety assessment. However, it should be pointed out that one of the

Generic Safety Requirements for Developing Safe Insulin Pump Software

Science.gov (United States)

Zhang, Yi; Jetley, Raoul; Jones, Paul L; Ray, Arnab

2011-01-01

Background The authors previously introduced a highly abstract generic insulin infusion pump (GIIP) model that identified common features and hazards shared by most insulin pumps on the market. The aim of this article is to extend our previous work on the GIIP model by articulating safety requirements that address the identified GIIP hazards. These safety requirements can be validated by manufacturers, and may ultimately serve as a safety reference for insulin pump software. Together, these two publications can serve as a basis for discussing insulin pump safety in the diabetes community. Methods In our previous work, we established a generic insulin pump architecture that abstracts functions common to many insulin pumps currently on the market and near-future pump designs. We then carried out a preliminary hazard analysis based on this architecture that included consultations with many domain experts. Further consultation with domain experts resulted in the safety requirements used in the modeling work presented in this article. Results Generic safety requirements for the GIIP model are presented, as appropriate, in parameterized format to accommodate clinical practices or specific insulin pump criteria important to safe device performance. Conclusions We believe that there is considerable value in having the diabetes, academic, and manufacturing communities consider and discuss these generic safety requirements. We hope that the communities will extend and revise them, make them more representative and comprehensive, experiment with them, and use them as a means for assessing the safety of insulin pump software designs. One potential use of these requirements is to integrate them into model-based engineering (MBE) software development methods. We believe, based on our experiences, that implementing safety requirements using MBE methods holds promise in reducing design/implementation flaws in insulin pump development and evolutionary processes, therefore improving

Reduced Dynamics of the Non-holonomic Whipple Bicycle

Science.gov (United States)

Boyer, Frédéric; Porez, Mathieu; Mauny, Johan

2018-06-01

Though the bicycle is a familiar object of everyday life, modeling its full nonlinear three-dimensional dynamics in a closed symbolic form is a difficult issue for classical mechanics. In this article, we address this issue without resorting to the usual simplifications on the bicycle kinematics nor its dynamics. To derive this model, we use a general reduction-based approach in the principal fiber bundle of configurations of the three-dimensional bicycle. This includes a geometrically exact model of the contacts between the wheels and the ground, the explicit calculation of the kernel of constraints, along with the dynamics of the system free of any external forces, and its projection onto the kernel of admissible velocities. The approach takes benefits of the intrinsic formulation of geometric mechanics. Along the path toward the final equations, we show that the exact model of the bicycle dynamics requires to cope with a set of non-symmetric constraints with respect to the structural group of its configuration fiber bundle. The final reduced dynamics are simulated on several examples representative of the bicycle. As expected the constraints imposed by the ground contacts, as well as the energy conservation, are satisfied, while the dynamics can be numerically integrated in real time.

Bicycling to school improves the cardiometabolic risk factor profile

DEFF Research Database (Denmark)

Ostergaard, Lars; Børrestad, Line A B; Tarp, Jakob

2012-01-01

To investigate whether bicycling to school improves cardiometabolic risk factor profile and cardiorespiratory fitness among children.......To investigate whether bicycling to school improves cardiometabolic risk factor profile and cardiorespiratory fitness among children....

Safe Kids Week: Analysis of gender bias in a national child safety campaign, 1997-2016.

Science.gov (United States)

Bauer, Michelle E E; Brussoni, Mariana; Giles, Audrey R; Fuselli, Pamela

2017-09-29

Background and Purpose Child safety campaigns play an important role in disseminating injury prevention information to families. A critical discourse analysis of gender bias in child safety campaign marketing materials can offer important insights into how families are represented and the potential influence that gender bias may have on uptake of injury prevention information. Methods Our approach was informed by poststructural feminist theory, and we used critical discourse analysis to identify discourses within the poster materials. We examined the national Safe Kids Canada Safe Kids Week campaign poster material spanning twenty years (1997-2016). Specifically, we analyzed the posters' typeface, colour, images, and language to identify gender bias in relation to discourses surrounding parenting, safety, and societal perceptions of gender. Results The findings show that there is gender bias present in the Safe Kids Week poster material. The posters represent gender as binary, mothers as primary caregivers, and showcase stereotypically masculine sporting equipment among boys and stereotypically feminine equipment among girls. Interestingly, we found that the colour and typeface of the text both challenge and perpetuate the feminization of safety. Discussion It is recommended that future child safety campaigns represent changing family dynamics, include representations of children with non-traditionally gendered sporting equipment, and avoid the representation of gender as binary. This analysis contributes to the discussion of the feminization of safety in injury prevention research and challenges the ways in which gender is represented in child safety campaigns. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Driver braking behavior analysis to improve autonomous emergency braking systems in typical Chinese vehicle-bicycle conflicts.

Science.gov (United States)

Duan, Jingliang; Li, Renjie; Hou, Lian; Wang, Wenjun; Li, Guofa; Li, Shengbo Eben; Cheng, Bo; Gao, Hongbo

2017-11-01

Bicycling is one of the fundamental modes of transportation especially in developing countries. Because of the lack of effective protection for bicyclists, vehicle-bicycle (V-B) accident has become a primary contributor to traffic fatalities. Although AEB (Autonomous Emergency Braking) systems have been developed to avoid or mitigate collisions, they need to be further adapted in various conflict situations. This paper analyzes the driver's braking behavior in typical V-B conflicts of China to improve the performance of Bicyclist-AEB systems. Naturalistic driving data were collected, from which the top three scenarios of V-B accidents in China were extracted, including SCR (a bicycle crossing the road from right while a car is driving straight), SCL (a bicycle crossing the road from left while a car is driving straight) and SSR (a bicycle swerving in front of the car from right while a car is driving straight). For safety and data reliability, a driving simulator was employed to reconstruct these three scenarios and some 25 licensed drivers were recruited for braking behavior analysis. Results revealed that driver's braking behavior was significantly influenced by V-B conflict types. Pre-decelerating behaviors were found in SCL and SSR conflicts, whereas in SCR the subjects were less vigilant. The brake reaction time and brake severity in lateral V-B conflicts (SCR and SCL) was shorter and higher than that in longitudinal conflicts (SSR). The findings improve their applications in the Bicyclist-AEB and test protocol enactment to enhance the performance of Bicyclist-AEB systems in mixed traffic situations especially for developing countries. Copyright © 2017 Elsevier Ltd. All rights reserved.

An experiment on rider stability while mounting: Comparing middle-aged and elderly cyclists on pedelecs and conventional bicycles.

Science.gov (United States)

Twisk, D A M; Platteel, S; Lovegrove, G R

2017-08-01

Pedelecs, popular among elderly cyclists, are associated with a higher injury risk than conventional bicycles. About 17% of these injuries are due to falls while (dis)mounting. Using instrumented bicycles, this study aimed to identify factors contributing to the stability of self-chosen mounting methods in four user groups: 30-45 versus 65+ years of age and males versus females. Mounting stability on pedelecs was compared with that on conventional bicycles, in controlled experimental setting (task in a fenced off parking lot) but also in real traffic conditions (traffic light turns green). Two mounting phases were differentiated: phase 1 as the transition from 'earth bound' to 'balance' and phase 2 as the acceleration to achieve harmonized cycling. Stability was operationalised in terms of the duration of these phases: the shorter their duration, the higher the stability. Pedelecs were shown to be less stable in phase 1 than conventional bicycles, irrespective of user group. For all user groups, only in phase 2 the advantages of electrical support kicked in. Results obtained in traffic conditions confirmed the patterns obtained in the controlled setting, with as only difference a lower speed in traffic conditions, which held for both mounting phases and bicycle types. Also measures of physical limitations due to low muscle strength were shown only to be compensated for by pedal support in phase 2 and not in phase 1. Further, mounting characteristics affected pedelec stability in phase 1 and not in phase 2. Higher stability was associated with a) starting while seated and b) using the pedal to push off. Although, these mounting characteristics were confounded with age, gender, and muscle strength, the pattern of results still suggest certain mounting techniques to be more beneficial for pedelecs. The results further illustrate the importance of a deeper understanding of the interactions of bicycle types and user groups on critical manoeuvres and their potential

Using crowdsourcing to prioritize bicycle network improvements : final report.

Science.gov (United States)

2016-04-01

Effort to improve the bicycle route network using crowdsourced data is a powerful means : of incorporating citizens in infrastructure improvement decisions, which will improve : livability by maximizing the benefit of the bicycle infrastructure fundi...

DOES FOOD SAFETY CONFLICT WITH FOOD SECURITY? THE SAFE CONSUMPTION OF FOOD

OpenAIRE

Kinsey, Jean D.

2004-01-01

This paper concludes by saying no, food safety and security reinforce each other. It combines food safety and food security into the concept of "safe food consumption." Unsafe food consumption occurs when food contains known substances that lead to short or long term illness or death (botulism) and suspect substances that are believed to lead to delayed diseases (pesticides). It also occurs when hunger or over eating contribute to long-term illness and shorter life expectancy. The costs of il...

A randomized controlled trial to evaluate the Make Safe Happen® app-a mobile technology-based safety behavior change intervention for increasing parents' safety knowledge and actions.

Science.gov (United States)

McKenzie, Lara B; Roberts, Kristin J; Clark, Roxanne; McAdams, Rebecca; Abdel-Rasoul, Mahmoud; Klein, Elizabeth G; Keim, Sarah A; Kristel, Orie; Szymanski, Alison; Cotton, Christopher G; Shields, Wendy C

2018-03-12

Many unintentional injuries that occur in and around the home can be prevented through the use of safety equipment and by consistently following existing safety recommendations. Unfortunately, uptake of these safety behaviors is unacceptably low. This paper describes the design of the Make Safe Happen® smartphone application evaluation study, which aims to evaluate a mobile technology-based safety behavior change intervention on parents' safety knowledge and actions. Make Safe Happen® app evaluation study is a randomized controlled trial. Participants will be parents of children aged 0-12 years who are recruited from national consumer online survey panels. Parents will complete a pretest survey, and will be randomized to receive the Make Safe Happen® app or a non-injury-related app, and then complete a posttest follow-up survey after 1 week. Primary outcomes are: (1) safety knowledge; (2) safety behaviors; (3) safety device acquisition and use, and (4) behavioral intention to take safety actions. Anticipated study results are presented. Wide-reaching interventions, to reach substantial parent and caregiver audiences, to effectively reduce childhood injuries are needed. This study will contribute to the evidence-base about how to increase safety knowledge and actions to prevent home-related injuries in children. NCT02751203 ; Pre-results.

Characterizing the speed and paths of shared bicycles in Lyon

OpenAIRE

Jensen , Pablo; Rouquier , Jean-Baptiste; Ovtracht , Nicolas; Robardet , Céline

2010-01-01

Thanks to numerical data gathered by Lyon's shared bicycling system V\\'elo'v, we are able to analyze 11.6 millions bicycle trips, leading to the first robust characterization of urban bikers' behaviors. We show that bicycles outstrip cars in downtown Lyon, by combining high speed and short paths.These data also allows us to calculate V\\'elo'v fluxes on all streets, pointing to interesting locations for bike paths.

Fluid Mechanics of a High Performance Racing Bicycle Wheel

Science.gov (United States)

Mercat, Jean-Pierre; Cretoux, Brieuc; Huat, Francois-Xavier; Nordey, Benoit; Renaud, Maxime; Noca, Flavio

2013-11-01

In 2012, MAVIC released the most aerodynamic bicycle wheel on the market, the CXR 80. The french company MAVIC has been a world leader for many decades in the manufacturing of bicycle wheels for competitive events such as the Olympic Games and the Tour de France. Since 2010, MAVIC has been in a research partnership with the University of Applied Sciences in Geneva, Switzerland, for the aerodynamic development of bicycle wheels. While most of the development up to date has been performed in a classical wind tunnel, recent work has been conducted in an unusual setting, a hydrodynamic towing tank, in order to achieve low levels of turbulence and facilitate quantitative flow visualization (PIV). After a short introduction on the aerodynamics of bicycle wheels, preliminary fluid mechanics results based on this novel setup will be presented.

The SafeCOP ECSEL Project: Safe Cooperating Cyber-Physical Systems Using Wireless Communication

DEFF Research Database (Denmark)

Pop, Paul; Scholle, Detlef; Hansson, Hans

2016-01-01

This paper presents an overview of the ECSEL project entitled "Safe Cooperating Cyber-Physical Systems using Wireless Communication" (SafeCOP), which runs during the period 2016 -- 2019. SafeCOP targets safety-related Cooperating Cyber-Physical Systems (CO-CPS) characterised by use of wireless...... detection of abnormal behaviour, triggering if needed a safe degraded mode. SafeCOP will also develop methods and tools, which will be used to produce safety assurance evidence needed to certify cooperative functions. SafeCOP will extend current wireless technologies to ensure safe and secure cooperation...

Use and activity levels on newly built bicycle playgrounds

DEFF Research Database (Denmark)

Schipperijn, Jasper; Hansen, Christine Kier; Rask, Simon

2015-01-01

Increasing the use of urban green space (UGS) as well as increasing cycling could potentially help address the growing inactivity problem. Three bicycle playgrounds were designed based on a participatory process and afterwards constructed in the UGS along a cycle-route on the historic outer defence...... close to one of the sites. A future study involving objective before and after measures when a new bicycle playground is build will be needed to reveal if bicycle playgrounds can provide additional activity to its users, or ‘just’ a different type of activity, in a different location....

An improved multi-value cellular automata model for heterogeneous bicycle traffic flow

Energy Technology Data Exchange (ETDEWEB)

Jin, Sheng [College of Civil Engineering and Architecture, Zhejiang University, Hangzhou, 310058 China (China); Qu, Xiaobo [Griffith School of Engineering, Griffith University, Gold Coast, 4222 Australia (Australia); Xu, Cheng [Department of Transportation Management Engineering, Zhejiang Police College, Hangzhou, 310053 China (China); College of Transportation, Jilin University, Changchun, 130022 China (China); Ma, Dongfang, E-mail: mdf2004@zju.edu.cn [Ocean College, Zhejiang University, Hangzhou, 310058 China (China); Wang, Dianhai [College of Civil Engineering and Architecture, Zhejiang University, Hangzhou, 310058 China (China)

2015-10-16

This letter develops an improved multi-value cellular automata model for heterogeneous bicycle traffic flow taking the higher maximum speed of electric bicycles into consideration. The update rules of both regular and electric bicycles are improved, with maximum speeds of two and three cells per second respectively. Numerical simulation results for deterministic and stochastic cases are obtained. The fundamental diagrams and multiple states effects under different model parameters are analyzed and discussed. Field observations were made to calibrate the slowdown probabilities. The results imply that the improved extended Burgers cellular automata (IEBCA) model is more consistent with the field observations than previous models and greatly enhances the realism of the bicycle traffic model. - Highlights: • We proposed an improved multi-value CA model with higher maximum speed. • Update rules are introduced for heterogeneous bicycle traffic with maximum speed 2 and 3 cells/s. • Simulation results of the proposed model are consistent with field bicycle data. • Slowdown probabilities of both regular and electric bicycles are calibrated.

An improved multi-value cellular automata model for heterogeneous bicycle traffic flow

International Nuclear Information System (INIS)

Jin, Sheng; Qu, Xiaobo; Xu, Cheng; Ma, Dongfang; Wang, Dianhai

2015-01-01

This letter develops an improved multi-value cellular automata model for heterogeneous bicycle traffic flow taking the higher maximum speed of electric bicycles into consideration. The update rules of both regular and electric bicycles are improved, with maximum speeds of two and three cells per second respectively. Numerical simulation results for deterministic and stochastic cases are obtained. The fundamental diagrams and multiple states effects under different model parameters are analyzed and discussed. Field observations were made to calibrate the slowdown probabilities. The results imply that the improved extended Burgers cellular automata (IEBCA) model is more consistent with the field observations than previous models and greatly enhances the realism of the bicycle traffic model. - Highlights: • We proposed an improved multi-value CA model with higher maximum speed. • Update rules are introduced for heterogeneous bicycle traffic with maximum speed 2 and 3 cells/s. • Simulation results of the proposed model are consistent with field bicycle data. • Slowdown probabilities of both regular and electric bicycles are calibrated

Sociodemographic Factors, Population Density, and Bicycling for Transportation in the United States.

Science.gov (United States)

Nehme, Eileen K; Pérez, Adriana; Ranjit, Nalini; Amick, Benjamin C; Kohl, Harold W

2016-01-01

Transportation bicycling is a behavior with demonstrated health benefits. Population-representative studies of transportation bicycling in United States are lacking. This study examined associations between sociodemographic factors, population density, and transportation bicycling and described transportation bicyclists by trip purposes, using a US-representative sample. This cross-sectional study used 2009 National Household Travel Survey datasets. Associations among study variables were assessed using weighted multivariable logistic regression. On a typical day in 2009, 1% of Americans older than 5 years of age reported a transportation bicycling trip. Transportation cycling was inversely associated with age and directly with being male, with being white, and with population density (≥ 10,000 vs transportation. Twenty-one percent of transportation bicyclists reported trips to work, whereas 67% reported trips to social or other activities. Transportation bicycling in the United States is associated with sociodemographic characteristics and population density. Bicycles are used for a variety of trip purposes, which has implications for transportation bicycling research based on commuter data and for developing interventions to promote this behavior.

Successful Swiss solar bicycles in Australia

International Nuclear Information System (INIS)

Hansen, K.

2000-01-01

The article takes a look at the Swiss 'Spirit of Bike' team's success in the 'Power Challenge' race across Australia using solar-bicycles based on commercially available models. Apart from the sporting aspects of race, technical details on the cycles and their supply of solar power are given. Also, the history behind the success of the team is presented and the monitoring of man (and woman) and machine during the race is described. The article also discusses the electric bicycles that are commercially available and the potential of these energy-efficient vehicles in Switzerland

On the influence of tyre and structural properties on the stability of bicycles

Science.gov (United States)

Doria, Alberto; Roa Melo, Sergio Daniel

2018-06-01

In recent years the Whipple Carvallo Bicycle Model has been extended to analyse high speed stability of bicycles. Various researchers have developed models taking into account the effects of front frame compliance and tyre properties, nonetheless, a systematic analysis has not been yet carried out. This paper aims at analysing parametrically the influence of front frame compliance and tyre properties on the open loop stability of bicycles. Some indexes based on the eigenvalues of the dynamic system are defined to evaluate quantitatively bicycle stability. The parametric analysis is carried out with a factorial design approach to determine the most influential parameters. A commuting and a racing bicycle are considered and numerical results show different effects of the various parameters on each bicycle. In the commuting bicycle, the tyre properties have greater influence than front frame compliance, and the weave mode has the main effect on stability. Conversely, in the racing bicycle, the front frame compliance parameters have greater influence than tyre properties, and the wobble mode has the main effect on stability.

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements (Arabic Edition)

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-07-01

The IAEA's Statute authorizes the Agency to 'establish or adopt' standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements (Chinese Edition)

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-03-01

The IAEA's Statute authorizes the Agency to 'establish or adopt' standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements (French Edition)

International Nuclear Information System (INIS)

2013-01-01

The IAEA's Statute authorizes the Agency to ''establish or adopt standards of safety for protection of health and minimization of danger to life and property'' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements (Chinese Edition)

International Nuclear Information System (INIS)

2013-01-01

The IAEA's Statute authorizes the Agency to 'establish or adopt' standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements (Arabic Edition)

International Nuclear Information System (INIS)

2012-01-01

The IAEA's Statute authorizes the Agency to 'establish or adopt' standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

Is "Safety" Dangerous? A Critical Examination of the Classroom as Safe Space

Directory of Open Access Journals (Sweden)

Betty J. Barrett

2010-06-01

Full Text Available The notion that the classroom can, indeed must, be a safe space to promote student engagement and enhance academic outcomes is pervasive in the teaching and learning literature. Despite the prevalence of this claim, there is a dearth of empirical evidence documenting the effectiveness of safe space classrooms in achieving these goals. The purpose of this essay is to provide a critical examination of the classroom as safe space. I begin by deconstructing the common meanings of safety as presented in the pedagogical literature and provide an overview of the existing research on student perceptions of safe space learning environments. I then problematize the metaphor of the classroom as safe space through an examination of 1 the impact of safety on student intellectual development 2 the impossibility of safety for students in marginalized and oppressed populations 3 the challenges to assessing student learning in safe environments and 4 the ambiguity inherent in defining safety for students. I conclude by arguing that both educators and students are better served by the development of an alternative discourse of classroom safety, one that is predicated on the notion of classroom civility.Dans la littérature sur l’enseignement et l’apprentissage, la notion selon laquelle la classe doit vraiment être un espace sécuritaire pour promouvoir la participation de l’étudiant et améliorer ses résultats scolaires est omniprésente. Malgré la prévalence de cette affirmation, il y a une pénurie de données probantes empiriques venant étayer l’efficacité des classes en tant qu’espace sécuritaire afin d’atteindre ces buts. L’objectif du présent essai est de procéder à un examen critique de la classe en tant qu’espace sécuritaire. Je commence par déconstruire la signification courante de la sécurité telle qu���elle est présentée dans la littérature sur la pédagogie et fournis un aperçu de la

Qualities and attributes of a safe practitioner: identification of safety skills in healthcare.

Science.gov (United States)

Long, S; Arora, S; Moorthy, K; Sevdalis, N; Vincent, C

2011-06-01

OBJECTIVES (1) To identify a range of safety skills (attributes of a safe practitioner) relevant across clinical specialities. 2) To obtain the views of clinicians regarding their importance and trainability. DESIGN We used a survey and focus group of 10 patient safety experts to extract a list of safety skills. 50 experienced clinicians rated the skills in terms of importance and trainability in an electronic questionnaire. SETTING A Clinical Safety Research Unit and its associated NHS Trust, within an Academic Health Science Centre. RESULTS 73 skills, in 18 broad categories, were identified from the focus group and survey. The majority of clinicians felt the skills were important (most important: technical skills (98%), crisis management (98%), honesty (97.5%); least important: open-mindedness (82%), patient awareness/empathy (81.7%), humility (81.2%)). There was less agreement about trainability (16/18 categories were felt to be trainable; most trainable: technical skills (98%), anticipation/preparedness (84%), organisational skills/efficiency (83%); least trainable: conscientiousness (56%), humility (40%), open-mindedness (30%)). More surgeons than physicians felt that team awareness and crisis management skills were trainable (p=0.0099, p=0.025, respectively). CONCLUSIONS We have identified a preliminary set of safety skills, which with further refinement could form the template for the development of a formal taxonomy of the qualities and attributes of the safe practitioner. Experts and practitioners agree about the importance of the individual skills. The fact that the majority of these were felt by experienced cross-speciality clinicians to be trainable is encouraging in terms of the possibility of developing generic safety curricula.

Associations between bicycling and carotid arterial stiffness in adolescents

DEFF Research Database (Denmark)

Ried-Larsen, M; Grøntved, A; Østergaard, Lars

2015-01-01

Youth Heart Study. Total frequency of bicycle usage was assessed by self-report, and carotid arterial stiffness was assessed using B-mode ultrasound. After adjusting for pubertal status, body height, and objectively measured physical activity and other personal lifestyle and demographic factors, boys......The aim of the study was to investigate the associations between bicycling and carotid arterial stiffness, independent of objectively measured moderate-and-vigorous physical activity. This cross-sectional study included 375 adolescents (age 15.7 ± 0.4 years) from the Danish site of the European...... using their bicycle every day of the week displayed a higher carotid arterial compliance {standard beta 0.47 [95% confidence interval (CI) 0.07-0.87]} and distension [standard beta 0.38 (95% CI -0.04 to 0.81)]. Boys using their bicycle every day of the week furthermore displayed a lower Young's elastic...

Advisory material for the IAEA regulations for the safe transport of radioactive material. Safety guide

International Nuclear Information System (INIS)

2008-01-01

Since the first edition in 1961, the Regulations for the Safe Transport of Radioactive Material of the IAEA (IAEA Regulations) have served as the basis of safety for the transport of radioactive material worldwide. In the discussions leading to the first edition of the IAEA Regulations, it was realized that there was need for a publication to supplement the Regulations which could give information of individual provisions as to their purpose, their scientific background and how to apply them in practice. In response, the Agency published Safety Series No. 7, entitled, in its first edition in 1961, 'Notes on Certain Aspects of the Regulations'. An additional source of information on the Regulations, providing advice on 'how' the user should comply with them which could be augmented from time to time in the light of latest experience, was provided by the Agency, initially in relation to the 1973 edition of the Regulations. This was entitled 'Advisory Material for the IAEA Regulations for the Safe Transport of Radioactive Material' and designated Safety Series No. 37. This document is the result of combining the two Safety Series in a single publication. Thus the primary purpose of this publication is to provide guidance to users on proven and acceptable ways of complying with the Regulations. This Advisory Material is not a stand-alone text and it only has significance when used as a companion to the IAEA Safety Standards Series No. ST-1, Regulations for the Safe Transport of Radioactive Material (1996 edition)

Uranium Mill Tailings Remedial Action Project Safety Advancement Field Effort (SAFE) Program

Energy Technology Data Exchange (ETDEWEB)

1994-02-01

In 1992, the Uranium Mill Tailings Remedial Action (UMTRA) Project experienced several health and safety related incidents at active remediation project sites. As a result, the U.S. Department of Energy (DOE) directed the Technical Assistance Contractor (TAC) to establish a program increasing the DOE`s overall presence at operational remediation sites to identify and minimize risks in operations to the fullest extent possible (Attachments A and B). In response, the TAC, in cooperation with the DOE and the Remedial Action Contractor (RAC), developed the Safety Advancement Field Effort (SAFE) Program.

Uranium Mill Tailings Remedial Action Project Safety Advancement Field Effort (SAFE) Program

International Nuclear Information System (INIS)

1994-02-01

In 1992, the Uranium Mill Tailings Remedial Action (UMTRA) Project experienced several health and safety related incidents at active remediation project sites. As a result, the U.S. Department of Energy (DOE) directed the Technical Assistance Contractor (TAC) to establish a program increasing the DOE's overall presence at operational remediation sites to identify and minimize risks in operations to the fullest extent possible (Attachments A and B). In response, the TAC, in cooperation with the DOE and the Remedial Action Contractor (RAC), developed the Safety Advancement Field Effort (SAFE) Program

Validity of instruments to assess students' travel and pedestrian safety.

Science.gov (United States)

Mendoza, Jason A; Watson, Kathy; Baranowski, Tom; Nicklas, Theresa A; Uscanga, Doris K; Hanfling, Marcus J

2010-05-18

Safe Routes to School (SRTS) programs are designed to make walking and bicycling to school safe and accessible for children. Despite their growing popularity, few validated measures exist for assessing important outcomes such as type of student transport or pedestrian safety behaviors. This research validated the SRTS school travel survey and a pedestrian safety behavior checklist. Fourth grade students completed a brief written survey on how they got to school that day with set responses. Test-retest reliability was obtained 3-4 hours apart. Convergent validity of the SRTS travel survey was assessed by comparison to parents' report. For the measure of pedestrian safety behavior, 10 research assistants observed 29 students at a school intersection for completion of 8 selected pedestrian safety behaviors. Reliability was determined in two ways: correlations between the research assistants' ratings to that of the Principal Investigator (PI) and intraclass correlations (ICC) across research assistant ratings. The SRTS travel survey had high test-retest reliability (kappa = 0.97, n = 96, p < 0.001) and convergent validity (kappa = 0.87, n = 81, p < 0.001). The pedestrian safety behavior checklist had moderate reliability across research assistants' ratings (ICC = 0.48) and moderate correlation with the PI (r = 0.55, p = < 0.01). When two raters simultaneously used the instrument, the ICC increased to 0.65. Overall percent agreement (91%), sensitivity (85%) and specificity (83%) were acceptable. These validated instruments can be used to assess SRTS programs. The pedestrian safety behavior checklist may benefit from further formative work.

A Modified Cellular Automaton Approach for Mixed Bicycle Traffic Flow Modeling

Directory of Open Access Journals (Sweden)

Xiaonian Shan

2015-01-01

Full Text Available Several previous studies have used the Cellular Automaton (CA for the modeling of bicycle traffic flow. However, previous CA models have several limitations, resulting in differences between the simulated and the observed traffic flow features. The primary objective of this study is to propose a modified CA model for simulating the characteristics of mixed bicycle traffic flow. Field data were collected on physically separated bicycle path in Shanghai, China, and were used to calibrate the CA model using the genetic algorithm. Traffic flow features between simulations of several CA models and field observations were compared. The results showed that our modified CA model produced more accurate simulation for the fundamental diagram and the passing events in mixed bicycle traffic flow. Based on our model, the bicycle traffic flow features, including the fundamental diagram, the number of passing events, and the number of lane changes, were analyzed. We also analyzed the traffic flow features with different traffic densities, traffic components on different travel lanes. Results of the study can provide important information for understanding and simulating the operations of mixed bicycle traffic flow.

Associations between a walkability index and bicycle use in Denmark

DEFF Research Database (Denmark)

Madsen, T.; Christiansen, L.; Nielsen, Thomas Alexander Sick

2012-01-01

/day, and important health benefits can accrue from regular commuting cycling. Studies have shown a positive correlation between walkability attributes of neighborhood environments (street connectivity, and use mix, residential density, retail floor area ratio) and cycling. Results from Australia/Belgium show...... associations between measures of walkability and bicycle use for transport and the present study focuses on exploring whether these findings can be applied to a Danish setting where cycling culture differs and bicycle share is much higher (17% of all trips are by bicycle)...

Safety analysis to support a safe operating envelope for fuel

International Nuclear Information System (INIS)

Gibb, R.A.; Reid, P.J.

1998-01-01

This paper presents an approach for defining a safe operating envelope for fuel. 'Safe operating envelope' is defined as an envelope of fuel parameters defined for application in safety analysis that can be related to, or used to define, the acceptable range of fuel conditions due to operational transients or deviations in fuel manufacturing processes. The paper describes the motivation for developing such a methodology. The methodology involved four steps: the update of fission product inventories, the review of sheath failure criteria, a review of input parameters to be used in fuel modelling codes, and the development of an improved fission product release code. This paper discusses the aspects of fuel sheath failure criteria that pertain to operating or manufacturing conditions and to the evaluation and selection of modelling input data. The other steps are not addressed in this paper since they have been presented elsewhere. (author)

Methods to assess the stability of a bicycle rider system

NARCIS (Netherlands)

Cooke, A.G.; Bulsink, Vera Elisabeth; Beusenberg, Mark; Dubbeldam, Rosemary; Bonnema, Gerrit Maarten; Poelman, Wim; Koopman, Hubertus F.J.M.

2012-01-01

The SOFIE (Intelligent Assisted Bicycles) project wishes to create performance and design guidelines for mechatronic appliances which improve the stability of electric bicycles, so-called intelligent stability assist devices (IAD). To achieve this goal, a stability hypothesis, an advanced

Using magnetorheological fluids in an innovative hybrid bicycle damper

International Nuclear Information System (INIS)

Shiao, Y J; Nguyen, T S

2015-01-01

Magnetorheological fluids are capable of changing their viscosity quickly. This can provide good controllability and fast dynamic response. A conventional passive suspension system with air spring or hydraulic damper has simple design and financial benefit for bicycles, but its operation is uncontrollable and non-adaptive. This paper presented a semi-active hybrid bicycle suspension system which combines conventional air spring and a new magnetorheological damping brake together to reduce vibration of a bicycle. A multi-layer magnetorheological brake and linkage mechanism are connected to bike fork to form the adaptive damping part of the innovative hybrid suspension system. The simulation results proved that the semi-active suspension system can reduce bike vibration effectively. (paper)

SenSafe: A Smartphone-Based Traffic Safety Framework by Sensing Vehicle and Pedestrian Behaviors

Directory of Open Access Journals (Sweden)

Zhenyu Liu

2016-01-01

Full Text Available Traffic accident involving vehicles is one of the most serious problems in the transportation system nowadays. How to detect dangerous steering and then alarm drivers in real time is a problem. What is more, walking while using smartphones makes pedestrian more susceptible to various risks. Although dedicated short range communication (DSRC provides the way for safety communications, most of vehicles have not been deployed with DSRC components. Even worse, DSRC is not supported by the smartphones for vehicle-to-pedestrian (V2P communication. In this paper, a smartphone-based framework named SenSafe is developed to improve the traffic safety. SenSafe is a framework which only utilizes the smartphone to sense the surrounding events and provides alerts to drivers. Smartphone-based driving behaviors detection mechanism is developed inside the framework to discover various steering behaviors. Besides, the Wi-Fi association and authentication overhead is reduced to broadcast the compressed sensing data using the Wi-Fi beacon to inform the drivers of the surroundings. Furthermore, a collision estimation algorithm is designed to issue appropriate warnings. Finally, an Android-based implementation of SenSafe framework has been achieved to demonstrate the application reliability in real environments.

History of safe use as applied to the safety assessment of novel foods and foods derived from genetically modified organisms.

Science.gov (United States)

Constable, A; Jonas, D; Cockburn, A; Davi, A; Edwards, G; Hepburn, P; Herouet-Guicheney, C; Knowles, M; Moseley, B; Oberdörfer, R; Samuels, F

2007-12-01

Very few traditional foods that are consumed have been subjected to systematic toxicological and nutritional assessment, yet because of their long history and customary preparation and use and absence of evidence of harm, they are generally regarded as safe to eat. This 'history of safe use' of traditional foods forms the benchmark for the comparative safety assessment of novel foods, and of foods derived from genetically modified organisms. However, the concept is hard to define, since it relates to an existing body of information which describes the safety profile of a food, rather than a precise checklist of criteria. The term should be regarded as a working concept used to assist the safety assessment of a food product. Important factors in establishing a history of safe use include: the period over which the traditional food has been consumed; the way in which it has been prepared and used and at what intake levels; its composition and the results of animal studies and observations from human exposure. This paper is aimed to assist food safety professionals in the safety evaluation and regulation of novel foods and foods derived from genetically modified organisms, by describing the practical application and use of the concept of 'history of safe use'.

Keeping patients safe in healthcare organizations: a structuration theory of safety culture.

Science.gov (United States)

Groves, Patricia S; Meisenbach, Rebecca J; Scott-Cawiezell, Jill

2011-08-01

This paper presents a discussion of the use of structuration theory to facilitate understanding and improvement of safety culture in healthcare organizations. Patient safety in healthcare organizations is an important problem worldwide. Safety culture has been proposed as a means to keep patients safe. However, lack of appropriate theory limits understanding and improvement of safety culture. The proposed structuration theory of safety culture was based on a critique of available English-language literature, resulting in literature published from 1983 to mid-2009. CINAHL, Communication and Mass Media Complete, ABI/Inform and Google Scholar databases were searched using the following terms: nursing, safety, organizational culture and safety culture. When viewed through the lens of structuration theory, safety culture is a system involving both individual actions and organizational structures. Healthcare organization members, particularly nurses, share these values through communication and enact them in practice, (re)producing an organizational safety culture system that reciprocally constrains and enables the actions of the members in terms of patient safety. This structurational viewpoint illuminates multiple opportunities for safety culture improvement. Nurse leaders should be cognizant of competing value-based culture systems in the organization and attend to nursing agency and all forms of communication when attempting to create or strengthen a safety culture. Applying structuration theory to the concept of safety culture reveals a dynamic system of individual action and organizational structure constraining and enabling safety practice. Nurses are central to the (re)production of this safety culture system. © 2011 Blackwell Publishing Ltd.

On-road Bicycle Pavement Markings

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — A mile by mile breakdown of the on-street bicycle pavement markings installed within the City of Pittsburgh. These include bike lanes, shared lane markings...

The Comprehensive Benefit Evaluation of Take Shared Bicycles as Connecting to Public Transit

Science.gov (United States)

Zhang, J. Y.; Sun, H.; Li, P. F.; Li, C. C.

2017-10-01

Shared bicycles as an important way of connecting public transport, have few literature to evaluate its effectiveness.This paper taking Beijing city as an example, make anevaluationfor the six types of travel combinations which are commonly used by the citizens. The author selects four quantitative indicators: fuel consumption, economic cost, total time spent, and CO2 emission. And two qualitative indicators: degree of comfort and convenience. The relative efficiency of quantitative indicators is obtained by data envelopment analysis (DEA) and fuzzification and then take fuzzy synthetic evaluation with qualitative indicators.It was found that the choice of shared bicycles +subway+ shared bicycles and shared bicycles has good comprehensive benefits in medium distance travel. The findings also suggest that shared bicycles +subway+ shared bicycles is the best choice in the utilitarian trips. The conclusions not only provide suggestions for the travellers to select travel modes, but also can adjust the relevant factors to increase the proportion of green travel.

Comparing the effects of infrastructure on bicycling injury at intersections and non-intersections using a case–crossover design

Science.gov (United States)

Harris, M Anne; Reynolds, Conor C O; Winters, Meghan; Cripton, Peter A; Shen, Hui; Chipman, Mary L; Cusimano, Michael D; Babul, Shelina; Brubacher, Jeffrey R; Friedman, Steven M; Hunte, Garth; Monro, Melody; Vernich, Lee; Teschke, Kay

2013-01-01

Background This study examined the impact of transportation infrastructure at intersection and non-intersection locations on bicycling injury risk. Methods In Vancouver and Toronto, we studied adult cyclists who were injured and treated at a hospital emergency department. A case–crossover design compared the infrastructure of injury and control sites within each injured bicyclist's route. Intersection injury sites (N=210) were compared to randomly selected intersection control sites (N=272). Non-intersection injury sites (N=478) were compared to randomly selected non-intersection control sites (N=801). Results At intersections, the types of routes meeting and the intersection design influenced safety. Intersections of two local streets (no demarcated traffic lanes) had approximately one-fifth the risk (adjusted OR 0.19, 95% CI 0.05 to 0.66) of intersections of two major streets (more than two traffic lanes). Motor vehicle speeds less than 30 km/h also reduced risk (adjusted OR 0.52, 95% CI 0.29 to 0.92). Traffic circles (small roundabouts) on local streets increased the risk of these otherwise safe intersections (adjusted OR 7.98, 95% CI 1.79 to 35.6). At non-intersection locations, very low risks were found for cycle tracks (bike lanes physically separated from motor vehicle traffic; adjusted OR 0.05, 95% CI 0.01 to 0.59) and local streets with diverters that reduce motor vehicle traffic (adjusted OR 0.04, 95% CI 0.003 to 0.60). Downhill grades increased risks at both intersections and non-intersections. Conclusions These results provide guidance for transportation planners and engineers: at local street intersections, traditional stops are safer than traffic circles, and at non-intersections, cycle tracks alongside major streets and traffic diversion from local streets are safer than no bicycle infrastructure. PMID:23411678

Using instrumented probe bicycles to develop bicycle safety and comfort prediction models.

NARCIS (Netherlands)

Lee, A. Dias, L. Mohanty, S. Carvalho, T. Commandeur, J. & Lovegrove, G.

2014-01-01

Common deterrents to cycling in North America are the real and/or perceived concerns on the safety, comfort, and practicality of choosing cycling over other modes of transportation, concerns that may be addressed by improved cycling facilities. The challenge lies in effectively quantifying the

Examining Capacity and Functioning of Bicycle Coalitions: A Descriptive Study

Directory of Open Access Journals (Sweden)

Melissa Bopp

2017-11-01

Full Text Available BackgroundBicycle coalitions represent a strong partner in creating bike-friendly communities through advocacy for physical infrastructure, encouragement for biking, or education about safety. Despite their versatility, little is known about their functioning. Therefore, the purpose of this study was to examine capacity, strengths, and weaknesses of these organizations.MethodsBicycle coalitions/advocacy groups from English-speaking countries were recruited to take part in an online survey via email invitation. The survey addressed basic information about the coalition (community demographics, location, leadership, communication strategies, coalition priorities, barriers to programming/activities, and partners.ResultsCoalitions (n = 56 from four countries completed the survey. Most coalitions operated as a non-profit (n = 44, 95.7%, 45% (n = 21 have paid staff as leaders, while 37% (n = 17 have volunteers as leaders. The following skills were represented in coalitions’ leadership: fundraising (n = 31, 53.4%, event planning (n = 31, 53.4%, urban planning (n = 26, 44%, and policy/legislation expertise (n = 26, 44.8%. Education (n = 26, 63.4% and encouragement (n = 25, 61.6% were viewed as top priorities and the safety of bicyclists (n = 21, 46.7% and advocacy for infrastructure and policy (n = 22, 48.9% is the focus of most activities. A lack of financial resources (n = 36, 81.8% and capable personnel (n = 25, 56.8% were significant barriers to offering programming in the community and that the availability of grants to address issues (n = 38, 86.4% would be the top motivator for improvements.ConclusionBike coalitions represent a critical partner in creating activity-friendly environments and understanding their capacity allows for creating skill/capacity building intervention programs, development of effective toolkits and fostering strong collaborations to address physical inactivity.

Getting Bicycles on Trains - Inter-modal Transport Developments in Denmark

DEFF Research Database (Denmark)

Jørgensen, Ulrik; Pedersen, Bjørn Brix

2001-01-01

The combined use of bicycles and trains has been favored in contemporary public transport policies in Denmark. Although bicycling has played a major role in Danish personal transportation in more than hundred years, the attitude from public transport authorities towards supporting bicyclists has ...... varied quite a lot....

Modular mechatronic system for stationary bicycles interfaced with virtual environment for rehabilitation.

Science.gov (United States)

Ranky, Richard G; Sivak, Mark L; Lewis, Jeffrey A; Gade, Venkata K; Deutsch, Judith E; Mavroidis, Constantinos

2014-06-05

Cycling has been used in the rehabilitation of individuals with both chronic and post-surgical conditions. Among the challenges with implementing bicycling for rehabilitation is the recruitment of both extremities, in particular when one is weaker or less coordinated. Feedback embedded in virtual reality (VR) augmented cycling may serve to address the requirement for efficacious cycling; specifically recruitment of both extremities and exercising at a high intensity. In this paper a mechatronic rehabilitation bicycling system with an interactive virtual environment, called Virtual Reality Augmented Cycling Kit (VRACK), is presented. Novel hardware components embedded with sensors were implemented on a stationary exercise bicycle to monitor physiological and biomechanical parameters of participants while immersing them in an augmented reality simulation providing the user with visual, auditory and haptic feedback. This modular and adaptable system attaches to commercially-available stationary bicycle systems and interfaces with a personal computer for simulation and data acquisition processes. The complete bicycle system includes: a) handle bars based on hydraulic pressure sensors; b) pedals that monitor pedal kinematics with an inertial measurement unit (IMU) and forces on the pedals while providing vibratory feedback; c) off the shelf electronics to monitor heart rate and d) customized software for rehabilitation. Bench testing for the handle and pedal systems is presented for calibration of the sensors detecting force and angle. The modular mechatronic kit for exercise bicycles was tested in bench testing and human tests. Bench tests performed on the sensorized handle bars and the instrumented pedals validated the measurement accuracy of these components. Rider tests with the VRACK system focused on the pedal system and successfully monitored kinetic and kinematic parameters of the rider's lower extremities. The VRACK system, a virtual reality mechatronic bicycle

Modular mechatronic system for stationary bicycles interfaced with virtual environment for rehabilitation

Science.gov (United States)

2014-01-01

Background Cycling has been used in the rehabilitation of individuals with both chronic and post-surgical conditions. Among the challenges with implementing bicycling for rehabilitation is the recruitment of both extremities, in particular when one is weaker or less coordinated. Feedback embedded in virtual reality (VR) augmented cycling may serve to address the requirement for efficacious cycling; specifically recruitment of both extremities and exercising at a high intensity. Methods In this paper a mechatronic rehabilitation bicycling system with an interactive virtual environment, called Virtual Reality Augmented Cycling Kit (VRACK), is presented. Novel hardware components embedded with sensors were implemented on a stationary exercise bicycle to monitor physiological and biomechanical parameters of participants while immersing them in an augmented reality simulation providing the user with visual, auditory and haptic feedback. This modular and adaptable system attaches to commercially-available stationary bicycle systems and interfaces with a personal computer for simulation and data acquisition processes. The complete bicycle system includes: a) handle bars based on hydraulic pressure sensors; b) pedals that monitor pedal kinematics with an inertial measurement unit (IMU) and forces on the pedals while providing vibratory feedback; c) off the shelf electronics to monitor heart rate and d) customized software for rehabilitation. Bench testing for the handle and pedal systems is presented for calibration of the sensors detecting force and angle. Results The modular mechatronic kit for exercise bicycles was tested in bench testing and human tests. Bench tests performed on the sensorized handle bars and the instrumented pedals validated the measurement accuracy of these components. Rider tests with the VRACK system focused on the pedal system and successfully monitored kinetic and kinematic parameters of the rider’s lower extremities. Conclusions The VRACK

Free Use of Bicycles at CERN

CERN Multimedia

2000-01-01

Imagine you have just arrived at CERN. You are from Russia or Japan and have no car but you do need to get around and do not like depending on public transport. What do you do? You go to the EP Service Point (Building 124) and meet Boris Cabaud to get a CERN bicycle. Use of the bicycle is free but you have to fill in an application form which needs to be signed by your Group or Division Secretary. Then the application is filled in, you are put on the waiting list and it might take you from one to four weeks to get your bike depending on the season. “Normally the bikes are only for Users in the EP division as they are paid for by the EP budget,” says Boris, “but some other divisions have made arrangements to cover the costs.” Boris takes care of 350 bicycles at present. Each bike can be lent for maximum one year. During the winter the bikes can be stored in building 301 as it is difficult to ride them in the snow. If a bike is broken or lost all costs will be billed to the group or team account of the bo...

Bicycle-bus conflict area study.

Science.gov (United States)

2009-11-01

Increasing bicycle use and bus ridership are both desirable policy goals : from a sustainability standpoint, but on city streets these two modes of : transport are often in conflict. While occupying opposite ends of the size : and weight spectrum, th...

Playing it safe: Patron safety strategies and experience of violence in night-time entertainment districts.

Science.gov (United States)

Zhou, Jin; Droste, Nicolas; Curtis, Ashlee; Zinkiewicz, Lucy; Miller, Peter

2018-03-01

Incidences of violence are elevated in night-time entertainment districts. Research suggests that safety-related behavioural strategies adopted while drinking can reduce negative alcohol-related outcomes. The current study investigates the use of safety strategies and its association with experiences of violence among patrons from the general population. Patron interviews (N = 3949) were conducted in and around licenced venues in Newcastle (New South Wales) and Geelong (Victoria) during peak trading hours (Friday and Saturday, 21:00-01:00 h). Participants (mean age = 24.3, SD = 5.8; male 54.4%) were asked to report what measures, if any, they used to keep safe when drinking and whether they had been involved in a violent incident in the last 12 months. After controlling for patron demographics and location, the use of multiple (more than one) safety strategies was significantly associated with reduced odds of involvement in a violent incident (odds ratio = 0.64, 95% confidence interval 0.49-0.85, P = 0.002). Significant gender differences were observed in the number and type of safety strategies reported. Increasing the number of safety-related behaviours during drinking occasions is associated with a small but significant reduction in experiencing alcohol-related harms, such as violence. [Zhou J, Droste N, Curtis A, Zinkiewicz L, Miller P. Playing it safe: Patron safety strategies and experience of violence in night-time entertainment districts. © 2017 Australasian Professional Society on Alcohol and other Drugs.

The Bicycle Compatibility Index : a level of service concept, implementation manual

Science.gov (United States)

1998-11-01

Currently, no methodology is widely accepted by engineers, planners, or bicycle coordinators that will allow them to determine how compatible a roadway is for allowing efficient operation of both bicycles and motor vehicles. Determining how existing ...

Environmental Risk Factors influencing Bicycle Theft: A Spatial Analysis in London, UK.

Directory of Open Access Journals (Sweden)

Lucy Waruguru Mburu

Full Text Available Urban authorities are continuously drawing up policies to promote cycling among commuters. However, these initiatives are counterproductive for the targeted objectives because they increase opportunities for bicycle theft. This paper explores Inner London as a case study to address place-specific risk factors for bicycle theft at the street-segment level while controlling for seasonal variation. The presence of certain public amenities (e.g., bicycle stands, railway stations, pawnshops was evaluated against locations of bicycle theft between 2013 and 2016 and risk effects were estimated using negative binomial regression models. Results showed that a greater level of risk stemmed from land-use facilities than from area-based socioeconomic status. The presence of facilities such as train stations, vacant houses, pawnbrokers and payday lenders increased bicycle theft, but no evidence was found that linked police stations with crime levels. The findings have significant implications for urban crime prevention with respect to non-residential land use.

Environmental Risk Factors influencing Bicycle Theft: A Spatial Analysis in London, UK.

Science.gov (United States)

Mburu, Lucy Waruguru; Helbich, Marco

2016-01-01

Urban authorities are continuously drawing up policies to promote cycling among commuters. However, these initiatives are counterproductive for the targeted objectives because they increase opportunities for bicycle theft. This paper explores Inner London as a case study to address place-specific risk factors for bicycle theft at the street-segment level while controlling for seasonal variation. The presence of certain public amenities (e.g., bicycle stands, railway stations, pawnshops) was evaluated against locations of bicycle theft between 2013 and 2016 and risk effects were estimated using negative binomial regression models. Results showed that a greater level of risk stemmed from land-use facilities than from area-based socioeconomic status. The presence of facilities such as train stations, vacant houses, pawnbrokers and payday lenders increased bicycle theft, but no evidence was found that linked police stations with crime levels. The findings have significant implications for urban crime prevention with respect to non-residential land use.

Costs and benefits of bicycling investments in Portland, Oregon.

Science.gov (United States)

Gotschi, Thomas

2011-01-01

Promoting bicycling has great potential to increase overall physical activity; however, significant uncertainty exists with regard to the amount and effectiveness of investment needed for infrastructure. The objective of this study is to assess how costs of Portland's past and planned investments in bicycling relate to health and other benefits. Costs of investment plans are compared with 2 types of monetized health benefits, health care cost savings and value of statistical life savings. Levels of bicycling are estimated using past trends, future mode share goals, and a traffic demand model. By 2040, investments in the range of $138 to $605 million will result in health care cost savings of $388 to $594 million, fuel savings of $143 to $218 million, and savings in value of statistical lives of $7 to $12 billion. The benefit-cost ratios for health care and fuel savings are between 3.8 and 1.2 to 1, and an order of magnitude larger when value of statistical lives is used. This first of its kind cost-benefit analysis of investments in bicycling in a US city shows that such efforts are cost-effective, even when only a limited selection of benefits is considered.

Sustainable road safety: a new (?) neighbourhood road pattern that saves VRU lives.

Science.gov (United States)

Wei, Vicky Feng; Lovegrove, Gord

2012-01-01

Both the UN (2007) and World Health Organizations (2004) have declared the enormous social and economic burden imposed on society by injuries due to road collisions as a major global problem. While the road safety problem is not new, this prominent global declaration sends an important signal of frustration regarding progress to date on reducing road collisions. It is clear that governments, communities, businesses and the public must discover ways of reducing this burden, especially as it relates to vulnerable road users (VRUs), typically meaning pedestrian and bicyclist road users. Recent comparisons of global VRU collisions statistics suggest that, in addition to mixed land use density, the layout of neighbourhood roads plays a vital role in the encouragement of walkable, safe and quiet, yet accessible and sustainable communities. The purpose of this paper was to: The Dutch Sustainable Road Safety (SRS) Program has produced a number of innovative land use and transportation initiatives for vehicular road users as well as non-vehicular VRUs. Following from the Dutch initiatives, these new 3-way offset, and fused grid neighbourhood patterns appear to not only have positive effects in encouraging mode split (i.e. increasing walking and bicycling, and transit), slowing traffic, and reducing energy consumption and GHG emissions; but also, to hold potential to improve road safety. To test the road safety hypothesis, UBCO researchers evaluated the level of road safety relative to five neighbourhood patterns - grid, culs-de-sac, and Dutch Sustainable Road Safety (SRS) (or limited access), 3-way offset, and fused grid networks. Analysis using standard transportation planning methodology revealed that they would maintain both mobility and accessibility. Analysis using standard road safety analysis methodology further revealed that these 3-way offset, and fused grid patterns would significantly improve road safety levels by as much as 60% compared to prevalent patterns (i

Bicycling-related accidents and factors contributing to injury

Energy Technology Data Exchange (ETDEWEB)

Gonzalez Perez, L.M.; Wideberg, J.; Gonzalez Perez-Somarriba, B.

2016-07-01

Objective: This study was conducted to find the epidemiological characteristics of bicycling-related maxillofacial fractures in a defined population, and identify factors contributing to injury. Methodology: A prospective study was carried out involving patients presenting with maxillofacial fractures sustained in bicycling-related accidents. Results: Between 908 of all cycling accidents attending for medical treatment, 122 patients (13% of all cycling accidents) were admitted with facial fractures between 2007 and 2014. Male and female ratio was 2.6:1, and the mean age was 29.4 years (standard deviation: 12.8, range: 12-79 years). Causes of injury included collisions (63%) and accidental falls (37%). The fracture patterns seen were mandibular (49%), zygomatic (32%), orbital (13%), nasal (7%), maxillary (2%), and frontal (2%). Condylar fractures were the most common of the mandibular fractures (63%). The most frequently observed concomitant lesions were orthopedic injuries. Conclusions: Bicycling-related maxillofacial injuries are common and therefore important to identify in order to design a sustainable transport system and for units that provide assistance to traffic accident victims. Missed diagnosis or delayed treatment can lead to facial deformities and functional problems. Wearing protective helmets and the improvement of the helmets design is one aspect that would be of interest for the prevention of injuries. Keywords: Cycling; bicycle-related trauma; maxillofacial fractures; risk factors; helmets. (Author)

Safe Kids Worldwide

Science.gov (United States)

... Blog Videos Newsletter facebook twitter instagram pinterest gplus youtube Search Menu Why It Matters Who We Are What We Do Find Your Safe Kids Safe Kids Day Main menu Keeping All Kids Safe Safety Tips Get Involved 4 Star Charity Donate Text Burns and Scalds 4 tips ...

Trends in the incidence and outcomes of bicycle-related injury in the emergency department: A nationwide population-based study in South Korea, 2012-2014.

Directory of Open Access Journals (Sweden)

Youn-Jung Kim

Full Text Available This study aimed to examine trends in the incidence and outcomes of bicycle-related injuries in emergency departments (ED in South Korea.We analysed data from the National Emergency Department Information System database for adult patients (≥20 years with bicycle-related injuries presenting to EDs in South Korea between January 2012 and December 2014. Riders and bicycle passengers whose injuries were associated with bicycle use were included. Serious outcomes were defined as death at the ED, need for emergency operation, or intensive care unit admission.The number of people who commute to work by bicycle increased by 36% from 205,100 in 2005 to 279,544 in 2015. Of 529,278 traffic-related trauma cases, 58,352 (11.0% were bicycle-related, which increased from 7,894 (10.2% in the first half of 2012 to 12,882 (12.2% in the second half of 2014 (p < 0.001. However, the proportion of serious outcomes decreased from 5.0% to 4.2% during the study period (p < 0.001. Serious outcomes were most frequent in the elderly (65-74 years and older elderly (≥75 years groups and decreased for all but the elderly age group from 10.3% to 9.8% (p = 0.204. The helmet use rate increased from 14.2% to 20.3% (p < 0.001 but was the lowest in the older elderly group (3.6% without change during the study period (from 4.7% to 3.7%, p = 0.656. A lack of helmet use was significantly associated with serious outcomes (odds ratio, 1.811; 95% confidence interval, 1.576-2.082.Although the incidence of bicycle-related injuries increased, the proportion of serious outcomes decreased, possibly due to increased helmet use. Public education on safety equipment use is required, especially in elderly populations.

The effect of a road safety educational program for kindergarten children on their parents' behavior and knowledge.

Science.gov (United States)

Ben-Bassat, Tamar; Avnieli, Shani

2016-10-01

Road safety education for children is one of the most important means for raising awareness of road safety and for educating children to behave safely as pedestrians, bicycle riders, and vehicle passengers. The current research presents a novel attempt to examine the effect of a unique road safety educational program for kindergarten children on a secondary target group-the parents. The program, named the "Zahav Bagan" program (ZBP), is presented at kindergartens once a week during the entire academic year. It is conducted by senior citizen volunteers and is part of the formal education of the children. The main purpose of the current study was to compare the behavior, awareness, and knowledge about child road safety, of two groups of parents-those whose children participated in the ZBP group, and those whose children did not; this latter group was the control group. A telephone-based survey was conducted using a sample of 76 ZBP parents and 59 control group parents. Results of the survey showed no effect of ZBP on parents' knowledge of child road safety law and recommendations, but more importantly, the results did show a significant effect in terms of parents' observance of safe behavior and in their awareness of road safety in everyday life. These results confirm the importance of educational programs on road safety, especially as triggers and reminders to children and to their parents, to act as cautious road users. Copyright © 2016 Elsevier Ltd. All rights reserved.

Daily Bicycling in Older Adults May Be Effective to Reduce Fall Risks - A Case Control Study.

Science.gov (United States)

Batcir, Shani; Melzer, Itshak

2018-01-18

Older adults gain many health benefits from riding bicycles regularly. We aimed to explore whether older persons who ride bicycles regularly have better balance than controls. Balance control and voluntary stepping were assessed in 20 older adults aged 65 to 85 who live in an agricultural community village who regularly ride bicycles (BR), and 30 age- and gender-matched non-bicycle riders (NBR). Self-reported function and fear of fall were also assessed. Bicycle riders showed significantly better balance, faster voluntary stepping, and better self-reported advanced lower extremity function compared with NBR. The results might suggest that bicycling regularly preserves balance control and speed of voluntary stepping in older adults because bicycling might maintain specific balance coordination patterns. The results should be treated with caution since BR were older adults who selected an active life style (i.e., bicycling as well as living in an agricultural village) that may bias the results.

Evaluating the Interference of Bicycle Traffic on Vehicle Operation on Urban Streets with Bike Lanes

Directory of Open Access Journals (Sweden)

Ziyuan Pu

2017-01-01

Full Text Available Many urban streets are designed with on-street bike lanes to provide right-of-way for bicycle traffic. However, when bicycle flow is large, extensive passing maneuvers could occupy vehicle lanes and thus cause interferences to vehicle traffic. The primary objective of this study is to evaluate how bicycle traffic affects vehicle operation on urban streets with bike lanes. Data were collected on six street segments in Nanjing, China. The cumulative curves were constructed to extract traffic flow information including individual bicycle and vehicle speeds and aggregated traffic parameters such as flow and density. The results showed that as bicycle density on bike lanes continuously increases faster bicycles may run into vehicle lanes causing considerable reductions in vehicle speeds. A generalized linear model was estimated to predict the vehicle delay. Results showed that vehicle delay increases as bicycle flow and vehicle flow increase. Number of vehicle lanes and width of bike lane also have significant impact on vehicle delay. Findings of the study are helpful to regions around the world in bike infrastructure design in order to improve operations of both bicycles and vehicles.

Final hazard classification and auditable safety analysis for the 105-C Reactor Interim Safe Storage Project

International Nuclear Information System (INIS)

Rodovsky, T.J.; Larson, A.R.; Dexheimer, D.

1996-12-01

This document summarizes the inventories of radioactive and hazardous materials present in the 105-C Reactor Facility and the operations associated with the Interim Safe Storage Project which includes decontamination and demolition and interim safe storage of the remaining facility. This document also establishes a final hazard classification and verifies that appropriate and adequate safety functions and controls are in place to reduce or mitigate the risk associated with those operations

What Food is to be Kept Safe and for Whom? Food-Safety Governance in an Unsafe Food System

Directory of Open Access Journals (Sweden)

Martha McMahon

2013-10-01

Full Text Available This paper argues that discussion of new food-safety governance should be framed by the realization that the dominant food system within which food-safety governance is designed to makes food safe is itself a structural and systemic sources of food un-safety, poor health and a future of food insecurity for many. For some, an appropriate policy response lies in addressing the connections between the food system and diseases such as heart disease, obesity and diabetes. For others it means subsuming food-safety governance within food security governance. For yet others, safe food implies food sovereignty governance and the primacy of a climate change resilient food system. Conventional approaches to food-safety governance are typically framed within a liability model of responsibility that has limited usefulness for addressing institutional, structural or systemic sources of harm such as those critics increasingly attribute to the dominant food system and which are not amenable to remedy by food-safety governance as it is widely understood. One cannot identify critical hazard points where risk is to be managed. These are food-system safety challenges. Because food-safety governance is so deeply political there needs to be greater attention to issues of governance rather than the more usual focus on the technologies of food-safety. Feminist political theorists have much to contribute to re-thinking food-safety governance in the context of diversity and the complexities of power. One could usefully start with the simple questions, “what food is to be kept-safe, for whom and who is the subject of food-safety governance in a post-Westphalian political economic order?” These questions can help unpack both the narrow parochialism and the misleading universalism of food-safety talk. This paper answers that neither the citizens of a particular state (or network of states nor the falsely universalizing identity of ‘the consumer’ are adequate answers

Grounding for safety

Energy Technology Data Exchange (ETDEWEB)

Prud' homme, P. [Hydro-Quebec, Montreal, PQ (Canada). TransEnergie Div.

2006-07-01

The importance of providing electrical grounds as a safety issue in the design of power transmission lines was discussed. Power transmission lines extend over several thousands of kilometers crossing various environments, including communities where electric utilities encourage the use of transmission rights-of-way passages for uses such as bicycle paths. In recent years, many new residential communities have been built at the border of power transmission rights-of-ways or substations. In view of this emerging trend, and the fact that internal statistics indicate that lightning strikes are responsible of about 50 to 60 per cent of transmission line faults, electric utilities are obligated to verify if their installations are safe. Hydro-Quebec TransEnergie's view on this subject was presented along with a review of international standards to determine if limits for touch voltage, step voltage and transferred potential close to transmission lines have been established by the international community. A variety of mitigation measures to control the increase in ground potential in the event of electrical faults were also proposed. tabs., figs.

Chest Traumas due to Bicycle accident in Childhood

Directory of Open Access Journals (Sweden)

Ufuk Cobanoglu

2011-09-01

Full Text Available Aim:Childhood injuries are the leading cause of death in children and result in significant healthcare utilization. Trauma is the second most common cause of mortality in children aged 1-4 years and leading cause of death in children older than 4 years. Thoracic injury is the second most leading cause of death in traumatized children. Multisystemic injury is found in more than 50% of children with thoracic injuries most of which are secondary to blunt traumas. We planned this study to evaluate thorax trauma cases secondary to bicycle driving in childhood and to draw attention to the importance of the regulation of traffic rules, the education of bicycle drivers.Material and Methods:  A retrospective evaluation was performed in 17 pediatric patients admitted to the Department of Thoracic Surgery during 2006-2010 with a diagnosis of chest trauma due to bicycle driving. For every patient, a pediatric trauma score (PTS was calculated. Descriptive statistics were performed for PTS. Results; Eleven (64.70% cases were injured due to the tricycle accidents and six cases 6 (35.29% were injured due to the two-wheeled bicycle accidents. The most frequent thoracic pathologies included pulmonary contusion (41.2% and chest wall contusion (29.41%. Extrathoracic injuries were seen in 35.29%, the extremities (17.64% and abdomino pelvic (11.76% being the most commonly involved. Treatment consisted of symptomatic treatment in 12 patients (70.58%, tube thoracostomy in 2 patients (11.76%, and thoracotomy in 1 patient (5.9%. The morbidity was seen in 3 patients (17.64%. The mortality rate was 5.9% (n:1. The mean PTS of the cases who had additional system injuries were significantly worse than the cases who had isolated chest traumas Conclusions: The pediatric thorax has a greater cartilage content and incomplete ossification of the ribs. Due to the pliability of the pediatric rib cage and mediastinal mobility, significant intrathoracic injury may exist in the

Predicting Public Bicycle Adoption Using the Technology Acceptance Model

Directory of Open Access Journals (Sweden)

Benjamin T. Hazen

2015-10-01

Full Text Available Bicycle sharing programs provide a sustainable mode of urban transportation. Although cities across the globe have developed these systems for their citizens and visitors, usage rates are not as high as anticipated. This research uses the technology acceptance model as the basis to understand one’s intention to adopt bicycle sharing programs. Using survey data derived from 421 participants in Beijing, China, the proposed covariance-based structural equation model consisting of perceived quality, perceived convenience, and perceived value is found to predict 50.5% of the variance in adoption intention. The findings of this research contribute to theory and practice in the burgeoning literature on public bicycle systems and sustainable urban transportation by offering a theoretical lens through which to consider system adoption, and providing information to practitioners as to what factors might contribute most to adoption.

The use of bicycle workstations to increase physical activity in secondary classrooms

Directory of Open Access Journals (Sweden)

Alicia Fedewa

2017-11-01

Full Text Available Background To date, the majority of interventions have implemented classroom-based physical activity (PA at the elementary level; however, there is both the potential and need to explore student outcomes at high-school level as well, given that very few studies have incorporated classroom-based PA interventions for adolescents. One exception has been the use of bicycle workstations within secondary classrooms. Using bicycle workstations in lieu of traditional chairs in a high school setting shows promise for enhancing adolescents’ physical activity during the school day. Participants and procedure The present study explored the effects of integrating bicycle workstations into a secondary classroom setting for four months in a sample of 115 adolescents using an A-B-A-B withdrawal design. The study took place in one Advanced Placement English classroom across five groups of students. Physical activity outcomes included average heart rate, and caloric expenditure. Behavioural outcomes included percentage of on-task/off-task behaviour and number of teacher prompts in redirecting off-task behaviour. Feasibility and acceptability data of using the bicycle workstations were also collected. Results Findings showed significant improvements in physical activity as measured by heart rate and caloric expenditure, although heart rate percentage remained in the low intensity range when students were on the bicycle workstations. No effects were found on students’ on-task behaviour when using the bicycle workstations. Overall, students found the bikes acceptable to use but noted disadvantages of them as well. Conclusions Using bicycle workstations in high-school settings appears promising for enhancing low-intensity physical activity among adolescents. The limitations of the present study and implications for physical activity interventions in secondary schools are discussed.

A dynamic fail-safe approach to the design of computer-based safety systems

International Nuclear Information System (INIS)

Smith, I.C.; Miller, M.

1994-01-01

For over 30 years AEA Technology has carried out research and development in the field of nuclear instrumentation and protection systems. Throughout the course of this extensive period of research and development the dominant theme has been the achievement of fully fail-safe designs. These are defined as designs in which the failure of any single component will result in the unit output reverting to a demand for trip action status. At an early stage it was recognized that the use of dynamic rather than static logic could ease the difficulties inherent in achieving a fail-safe design. The first dynamic logic systems coupled logic elements magnetically. The paper outlines the evolution from these early concepts of a dynamic fail-safe approach to the design of computer-based safety systems. Details are given of collaboration between AEA Technology and Duke Power Co. to mount an ISAT TM demonstration at Duke's Oconee Nuclear Power Station

An Analyses of Bicycle Accidents in Ankara: Analyses of 5 Years

Directory of Open Access Journals (Sweden)

Muhittin Yilmaz

2014-12-01

Full Text Available Aim: Bicycles are used for transportation, exercise and recreation. In this study we aimed to investigate the epidemiological, clinical and economic aspects of bicycle injuries. Material and Method: We included in the study who admitted to the Emergency Department with a bicycle accident between January 2008 and July 2012. Patient age and sex, accident pattern, presence of personal protective measures, injured body part, Glasgow Coma Scale (GCS score, Revised Trauma Score (RTS, radiological findings, requested consultations, duration of hospital stay, season of injury, and average cost rates were recorded. The study population was divided into 2 age groups as 0-14 years and over 14 years. Results: A patients were 238 (81.2% male and their mean age was 31.5±14.1 years. Fifty-five (18.8% patients were female and their mean age was 34.5±15.9 years. Males had significantly higher rate of bicycle injury (p

Investigation of Bicycle Travel Time Estimation Using Bluetooth Sensors for Low Sampling Rates

Directory of Open Access Journals (Sweden)

Zhenyu Mei

2014-10-01

Full Text Available Filtering the data for bicycle travel time using Bluetooth sensors is crucial to the estimation of link travel times on a corridor. The current paper describes an adaptive filtering algorithm for estimating bicycle travel times using Bluetooth data, with consideration of low sampling rates. The data for bicycle travel time using Bluetooth sensors has two characteristics. First, the bicycle flow contains stable and unstable conditions. Second, the collected data have low sampling rates (less than 1%. To avoid erroneous inference, filters are introduced to “purify” multiple time series. The valid data are identified within a dynamically varying validity window with the use of a robust data-filtering procedure. The size of the validity window varies based on the number of preceding sampling intervals without a Bluetooth record. Applications of the proposed algorithm to the dataset from Genshan East Road and Moganshan Road in Hangzhou demonstrate its ability to track typical variations in bicycle travel time efficiently, while suppressing high frequency noise signals.

Most common road safety engineering deficiencies in South Eastern Europe as a part of safe system approach

Science.gov (United States)

Jovanov, D.; Vollpracht, H. J.; Beles, H.; Popa, V.; Tolea, B. A.

2017-10-01

Most common road safety engineering deficiencies identified by the authors in South Eastern Europe, including Romania, have been collected together and presented in this paper as a part of road safety unbreakably connected to the safe system approach (driver-vehicle-road). In different South Eastern Europe countries Road Safety Audit (RSA), Road Safety Inspection (RSI), as well as Black Spot Management (BSM) was introduced and practical implementation experience enabled the authors to analyze the road safety problems. Typical road safety engineering deficiencies have been presented in 8 different subsections, based on PIARC (World Road Association) RSA approach. This paper presents collected common road safety problems with relevant illustrations (real pictures) with associated accident risks.

Predicting bicycle helmet stage-of-change among middle school, high school, and college cyclists from demographic, cognitive, and motivational variables.

Science.gov (United States)

Weiss, Jeffrey; Okun, Morris; Quay, Nancy

2004-09-01

To apply Prochaska's Transtheoretical model of behavior change to bicycle helmet use among middle school, high school, and college students. A battery of questionnaires was administered to cyclists in the seventh and ninth grades and to college students in Phoenix, Arizona (N=797). The battery included: (1) a question to determine respondent's stage of behavior change in Prochaska's Transtheoretical model; (2) items assessing the perceived pros and cons of helmet use; (3) a bicycle safety knowledge test; and (4) demographic information. Forty-three percent of the students were in "Precontemplation," 17% were in either "Contemplation" or "Preparation," 16% were in either "Action" or "Maintenance," and 24% were in the "Relapse" stage of change. Grade, Sex, Knowledge, Pros, and Cons, and the Grade by sex and the Grade by knowledge interactions were significant predictors of helmet use stages. Compared with students in Precontemplation, students in the Contemplation stage were disproportionately younger and had higher Pro scores, lower Con scores, and more knowledge (except in the ninth grade). The Transtheoretical model of behavior change is a viable theoretical framework for designing interventions aimed at increasing bicycle helmet use in children and adolescents.

Modeling electric bicycle's lane-changing and retrograde behaviors

Science.gov (United States)

Tang, Tie-Qiao; Luo, Xiao-Feng; Zhang, Jian; Chen, Liang

2018-01-01

Recently, electric bicycle (EB) has been one important traffic tool due to its own merits. However, EB's motion behaviors (especially at a signalized/non-signalized intersection) are more complex than those of vehicle since it always has lane-changing and retrograde behaviors. In this paper, we propose a model to explore EB's lane-changing and retrograde behaviors on a road with a signalized intersection. The numerical results indicate that the proposed model can qualitatively describe each EB's lane-changing and retrograde behaviors near a signalized intersection, and that lane-changing and retrograde behaviors have prominent impacts on the signalized intersection (i.e., prominent jams and congestions occur). The above results show that EB should be controlled as a vehicle, i.e., lane-changing and retrograde behaviors at a signalized intersection should strictly be prohibited to improve the operational efficiency and traffic safety at the signalized intersection.

Elaboration of Safe Community Assessment System

Directory of Open Access Journals (Sweden)

Birutė Mikulskienė

2013-08-01

Full Text Available The paper aims to design an assessment system to monitor and evaluate safety parameters and administrative efforts with the purpose to increase safety in municipalities. The safety monitoring system considered is to be the most important tool for creation and development of safe communities in Lithuania. Several methods were applied to achieve this purpose. In order to determine the role of local government in ensuring the safety of people, property and environment at the local level of a meta-analysis of research reports, the Lithuanian national legislation, strategic planning documents of the state and local government were carried out. Analysis of statistical data, structural analysis, comparative analysis and synthesis methods were used while investigating the areas of safety uncertainty, risk groups, identifying safety risk factors, determining their relationship, and creating a safe community assessment system. A safe community assessment system, which consists of two types of criteria, has been elaborated. The assessment system is based on the multi-level criteria for safety monitoring and the multi-level criteria for the evaluation of municipal activities in the field of building safety. Links between the criteria, peculiarities of their application and advantages in the process of safe community creation and development are analyzed. Design and implementation of the safe community assessment system is one of the most important stages to implement the idea of safe communities. The proposed system integrates a variety of risk areas, the safety achievement criteria are linked to the criteria used in the strategic planning. Periodic assessment of the safety situation using the proposed system ensures possibility to monitor current local safety conditions and assess the changes and the trends. A safe community assessment system is proposed to be used as a tool to unified municipalities safety comprehensiveness and compare safety level in

Elaboration of Safe Community Assessment System

Directory of Open Access Journals (Sweden)

Algirdas Astrauskas

2011-12-01

Full Text Available The paper aims to design an assessment system to monitor and evaluate safety parameters and administrative efforts with the purpose to increase safety in municipalities. The safety monitoring system considered is to be the most important tool for creation anddevelopment of safe communities in Lithuania. Several methods were applied to achieve this purpose. In order to determine the role of local government in ensuring the safety of people, property and environment at the local level of a meta-analysis of research reports,the Lithuanian national legislation, strategic planning documents of the state and local government were carried out. Analysis of statistical data, structural analysis, comparative analysis and synthesis methods were used while investigating the areas of safety uncertainty, risk groups, identifying safety risk factors, determining their relationship, and creating a safe community assessment system.A safe community assessment system, which consists of two types of criteria, has been elaborated. The assessment system is based on the multi-level criteria for safety monitoring and the multi-level criteria for the evaluation of municipal activities in the field of building safety. Links between the criteria, peculiarities of their application and advantages in the process of safe community creation and development are analyzed.Design and implementation of the safe community assessment system is one of the most important stages to implement the idea of safe communities. The proposed system integrates a variety of risk areas, the safety achievement criteria are linked to the criteria used in thestrategic planning. Periodic assessment of the safety situation using the proposed system ensures possibility to monitor current local safety conditions and assess the changes and the trends. A safe community assessment system is proposed to be used as a tool to unified municipalities safety comprehensiveness and compare safety level in

Low-stress bicycling and network connectivity.

Science.gov (United States)

2012-05-01

For a bicycling network to attract the widest possible segment of the population, its most fundamental attribute should be low-stress connectivity, that is, providing routes between peoples origins and destinations that do not require cyclists to ...

The unexpected stable market share of the bicycle in The Netherlands

NARCIS (Netherlands)

Van Goeverden, C.D.; Van Arem, B.; Godefrooij, T.

2013-01-01

In the Netherlands, the share of the bicycle as the main mode in all person trips has been highly constant in the past three decades (about 27%). A constant share is remarkable because a number of developments in this period were unfavourable for bicycle use, like ageing of the population, growing

Behaving safely under pressure: The effects of job demands, resources, and safety climate on employee physical and psychosocial safety behavior.

Science.gov (United States)

Bronkhorst, Babette

2015-12-01

Previous research has shown that employees who experience high job demands are more inclined to show unsafe behaviors in the workplace. In this paper, we examine why some employees behave safely when faced with these demands while others do not. We add to the literature by incorporating both physical and psychosocial safety climate in the job demands and resources (JD-R) model and extending it to include physical and psychosocial variants of safety behavior. Using a sample of 6230 health care employees nested within 52 organizations, we examined the relationship between job demands and (a) resources, (b) safety climate, and (c) safety behavior. We conducted multilevel analyses to test our hypotheses. Job demands (i.e., work pressure), job resources (i.e., job autonomy, supervisor support, and co-worker support) and safety climate (both physical and psychosocial safety climate) are directly associated with, respectively, lower and higher physical and psychosocial safety behavior. We also found some evidence that safety climate buffers the negative impact of job demands (i.e., work-family conflict and job insecurity) on safety behavior and strengthens the positive impact of job resources (i.e., co-worker support) on safety behavior. Regardless of whether the focus is physical or psychological safety, our results show that strengthening the safety climate within an organization can increase employees' safety behavior. Practical implication: An organization's safety climate is an optimal target of intervention to prevent and ameliorate negative physical and psychological health and safety outcomes, especially in times of uncertainty and change. Copyright © 2015 Elsevier Ltd and National Safety Council. All rights reserved.

DEVELOPMENT OF AN ELECTRIC BICYCLE FOR A SHARING SYSTEM IN PRAGUE

Directory of Open Access Journals (Sweden)

William Deleenheer

2017-12-01

Full Text Available By means of a development of an e-bike sharing system the Electromobility Project wants to provide an alternative way of comfortable transportation for students and staff of the CTU, primarily to commute between different campuses. The research for this project contains at least three different fields of study, namely electric vehicle and docking station development, intelligent transport systems and management and economics of transportation and telecommunication. After briefly stating general requirements for the sharing system, this paper focuses on the development of the electric bicycle. First an ideal bike design is defined. Then necessary motor power and battery capacity are calculated by estimating characteristics of cycling in Prague. A prototype was developed by converting a normal bicycle to an electric bicycle. Being equipped with devices for e-bike monitoring, controlling and data recording for a post trip analysis, this prototype is also intended to have an educational value for future students in the project. Results consist of an electrical bicycle configuration that matches the requirements and a sketch of an ideal e-bike for this project.

Advisory Material for the IAEA Regulations for the Safe Transport of Radioactive Material. Safety Guide (Spanish Edition)

International Nuclear Information System (INIS)

2010-01-01

This Safety Guide provides recommendations on achieving and demonstrating compliance with IAEA Safety Standards Series No. TS-R-1, Regulations for the Safe Transport of Radioactive Material, 2005 Edition, establishing safety requirements to be applied to the national and international transport of radioactive material. Transport is deemed to comprise all operations and conditions associated with and involved in the movement of radioactive material; these include the design, fabrication and maintenance of packaging, and the preparation, consigning, handling, carriage, storage in transit and receipt at the final destination of packages. This publication supersedes IAEA Safety Series No. TS-G-1.1, 2002 Edition

Constructing a Model for Safe Nuclear Energy. General Conference Event to Focus on Innovative Cross-cutting Approach to Nuclear Safety

International Nuclear Information System (INIS)

Verlini, Giovanni

2011-01-01

Two innovative IAEA Extra-Budgetary Programmes, supporting safe nuclear energy in Bulgaria and Romania, passed their one-year milestone in 2010. Funded by the Norwegian government, these programmes are unique in that they cover separate but cross-cutting issues related to nuclear safety, including safety culture, safety assessments, risk management and resource management.

Improvement of Freezing of Gait in Patients with Parkinson's Disease by Imagining Bicycling

Directory of Open Access Journals (Sweden)

Akio Kikuchi

2014-03-01

Full Text Available Freezing of gait (FOG is one of the factors that reduce the quality of life in patients with Parkinson's disease (PD. Imagining bicycling before gait start provided improvement in FOG in 2 PD patients. Imagining and mimicking bicycling after the initiation of gait allowed the rhythmic gait to continue without interruption. We suggest that imagining and mimicking bicycling, which are nonexternal cues, could serve as a helpful therapeutic approach for the intractable freezing and interruption of gait of PD patients.

Determining the Optimal Layout Design for Public Bicycle System within the Attractive Scope of a Metro Station

Directory of Open Access Journals (Sweden)

Jingxu Chen

2015-01-01

Full Text Available Public bicycle acts as a seamless feeder mode in combination with the citywide public transit, as well as a competitor for the inner-city short trips. The primary objective of this study is to address the layout planning of public bicycle system within the attracted scope of a metro station. Based on the land use function, population, and bicycle mode share, bicycle rental stations are divided into three types, namely, the metro station, district station, and resident station, and later the quantity of bicycle facilities in each rental station is estimated. Then, the service stations are selected from these bicycle rental stations to provide the service of periodical bicycle redistribution. An improved immune algorithm is proposed to determine the number and locations of service stations and the optimal route options for the implement of redistributing strategy. Finally, a case study of Nanjing Tianyin Road metro station is conducted to illustrate the proposed model and clarify some of its implementation details.

Safe disposal of radioactive waste. Post-closure safety assessment of permanent repository in Novi han

International Nuclear Information System (INIS)

Mateeva, M.

2007-01-01

A presented material is the third part of the monograph with title 'Safe disposal of radioactive waste. Post-closure safety assessment of the permanent repository in Novi Han'. This part deals with review of the scenario selection procedure. The process system of permanent repository for radioactive waste is describing in details for different levels. Preliminary screening process of features, events and processes is presented here. Interaction matrixes for basic disposal system components are constructed. Final selection and grouping between the included features, events and processes is done. Selected and defined scenarios for post-closure safety assessment are presented too. Key words: post-closure safety assessment, scenario generation procedure, process system, process influence diagram, and interaction matrix

EP BICYCLE POOL - VIGNETTES 2002

CERN Multimedia

EP-SMI Help Desk

2002-01-01

The vignettes (insurance certificates) for 2002 become obligatory from 1 June. If you have a bicycle from the EP Pool, please bring it to the EP-SMI Help Desk (Building 124) on any working day up to 31 May between 8h.30 - 12h.00 or 13h.30 - 17h.30. EP-SMI Help Desk

Biomechanical Evaluation of an Electric Power-Assisted Bicycle by a Musculoskeletal Model

Science.gov (United States)

Takehara, Shoichiro; Murakami, Musashi; Hase, Kazunori

In this study, we construct an evaluation system for the muscular activity of the lower limbs when a human pedals an electric power-assisted bicycle. The evaluation system is composed of an electric power-assisted bicycle, a numerical simulator and a motion capture system. The electric power-assisted bicycle in this study has a pedal with an attached force sensor. The numerical simulator for pedaling motion is a musculoskeletal model of a human. The motion capture system measures the joint angles of the lower limb. We examine the influence of the electric power-assisted force on each muscle of the human trunk and legs. First, an experiment of pedaling motion is performed. Then, the musculoskeletal model is calculated by using the experimental data. We discuss the influence on each muscle by electric power-assist. It is found that the muscular activity is decreased by the electric power-assist bicycle, and the reduction of the muscular force required for pedaling motion was quantitatively shown for every muscle.

Safe operating envelope

Energy Technology Data Exchange (ETDEWEB)

Oliva, N [Ontario Hydro, Toronto, ON (Canada)

1997-12-01

Safe Operating Envelope is described representing: The outer bound of plant conditions within which day-to-day plant operation must be maintained in order to comply with regulatory requirements, associated safety design criteria and corporate nuclear safety goals. Figs.

Safe operating envelope

International Nuclear Information System (INIS)

Oliva, N.

1997-01-01

Safe Operating Envelope is described representing: The outer bound of plant conditions within which day-to-day plant operation must be maintained in order to comply with regulatory requirements, associated safety design criteria and corporate nuclear safety goals. Figs

A Remote Power Management Strategy for the Solar Energy Powered Bicycle

Directory of Open Access Journals (Sweden)

Chung-Hsing Chao

2011-12-01

Full Text Available In this paper, a solar energy powered bicycle by a wireless sensor network (WSN far-end network monitoring solar energy to transfer the electrical energy storage and the effectiveness analysis is proposed. In order to achieve this goal, an embarked ZigBee by a solar-powered bicycle the far-end wireless network supervisory system is setup. Experimental results prove that our prototype, the solar energy powered bicycle, can manage the solar energy for charging two Lead-Acid batteries pack. As a result, the user by the wireless network in parking period knows the data on the amount of immediate solar radiation, the degree of illumination, the ambient temperature, and electrical energy storage capacity information by the internet interface.

Continuous variable transmission and regenerative braking devices in bicycles utilizing magnetorheological fluids

Science.gov (United States)

Cheung, Wai Ming; Liao, Wei-Hsin

2013-04-01

The use of magnetorheological (MR) fluids in vehicles has been gaining popular recently due to its controllable nature, which gives automotive designers more dimensions of freedom in functional designs. However, not much attention has been paid to apply it to bicycles. This paper is aimed to study the feasibility of applying MR fluids in different dynamic parts of a bicycle such as the transmission and braking systems. MR continuous variable transmission (CVT) and power generator assisted in braking systems were designed and analyzed. Both prototypes were fabricated and tested to evaluate their performances. Experimental results showed that the proposed designs are promising to be used in bicycles.

A multi-modal network approach to model public transport accessibility impacts of bicycle-train integration policies

NARCIS (Netherlands)

Geurs, Karst Teunis; La Paix Puello, Lissy Cesarina; van Weperen, Sander

2016-01-01

In the Netherlands, the bicycle plays an important in station access and, to a lesser extent, in station egress. There is however fairly little knowledge in the potential effects of bicycle-train integration policies. The aim of this paper is to examine the impacts of bicycle-train integration

Mathematical model for studying cyclist kinematics in vehicle-bicycle frontal collisions

Science.gov (United States)

Condrea, OA; Chiru, A.; Chiriac, RL; Vlase, S.

2017-10-01

For the development of effective vehicle related safety solutions to improve cyclist protection, kinematic predictions are essential. The objective of the paper was the elaboration of a simple mathematical model for predicting cyclist kinematics, with the advantage of yielding simple results for relatively complicated impact situations. Thus, the use of elaborated math software is not required and the calculation time is shortened. The paper presents a modelling framework to determine cyclist kinematic behaviour for the situations in which a M1 category vehicle frontally hits the rear part of a bicycle. After the primary impact between the vehicle front bumper and the bicycle, the cyclist hits the vehicle’s bonnet, the windscreen or both the vehicle’s bonnet and the windscreen in short succession. The head-windshield impact is often the most severe impact, causing serious and potentially lethal injuries. The cyclist is represented by a rigid segment and the equations of motion for the cyclist after the primary impact are obtained by applying Newton’s second law of motion. The impact time for the contact between the vehicle and the cyclist is yielded afterwards by formulating and intersecting the trajectories for two points positioned on the cyclist’s head/body and the vehicle’s windscreen/bonnet while assuming that the cyclist’s equations of motion after the primary impact remain the same. Postimpact kinematics for the secondary impact are yielded by applying linear and angular momentum conservation laws.

Does pedalling on a recumbent bicycle influence the cyclist’s steering behaviour?

NARCIS (Netherlands)

Boon, K.M.; Klap, P.; Van Lanen, J.A.; Letsoin, G.J.; Jansen, A.J.

2014-01-01

The paper presents the answer to the question how pedalling on a specific recumbent bicycle, such as the VeloX3, influences a cyclist’s ability to steer the bicycle. The research aims to find the correlation between pedalling and the undesired steering movements it creates. To test this assumption a

Influencing behaviour for safe working environments

OpenAIRE

Boer, de, J. (Johannes); Teeuw, W.B. (Wouter)

2011-01-01

Safety at work The objective of the project Safety at Work is to increase safety at the workplace by applying and combining state of the art artefacts from personal protective equipment and ambient intelligence technology. In this state of the art document we focus on the developments with respect to how (persuasive) technology can help to influence behaviour in a natural, automatic way in order to make industrial environments safer. We focus on personal safety, safe environments and safe beh...

An Association Rule Based Method to Integrate Metro-Public Bicycle Smart Card Data for Trip Chain Analysis

Directory of Open Access Journals (Sweden)

De Zhao

2018-01-01

Full Text Available Smart card data provide valuable insights and massive samples for enhancing the understanding of transfer behavior between metro and public bicycle. However, smart cards for metro and public bicycle are often issued and managed by independent companies and this results in the same commuter having different identity tags in the metro and public bicycle smart card systems. The primary objective of this study is to develop a data fusion methodology for matching metro and public bicycle smart cards for the same commuter using historical smart card data. A novel method with association rules to match the data derived from the two systems is proposed and validation was performed. The results showed that our proposed method successfully matched 573 pairs of smart cards with an accuracy of 100%. We also validated the association rules method through visualization of individual metro and public bicycle trips. Based on the matched cards, interesting findings of metro-bicycle transfer have been derived, including the spatial pattern of the public bicycle as first/last mile solution as well as the duration of a metro trip chain.

SafeNet: a methodology for integrating general-purpose unsafe devices in safe-robot rehabilitation systems.

Science.gov (United States)

Vicentini, Federico; Pedrocchi, Nicola; Malosio, Matteo; Molinari Tosatti, Lorenzo

2014-09-01

Robot-assisted neurorehabilitation often involves networked systems of sensors ("sensory rooms") and powerful devices in physical interaction with weak users. Safety is unquestionably a primary concern. Some lightweight robot platforms and devices designed on purpose include safety properties using redundant sensors or intrinsic safety design (e.g. compliance and backdrivability, limited exchange of energy). Nonetheless, the entire "sensory room" shall be required to be fail-safe and safely monitored as a system at large. Yet, sensor capabilities and control algorithms used in functional therapies require, in general, frequent updates or re-configurations, making a safety-grade release of such devices hardly sustainable in cost-effectiveness and development time. As such, promising integrated platforms for human-in-the-loop therapies could not find clinical application and manufacturing support because of lacking in the maintenance of global fail-safe properties. Under the general context of cross-machinery safety standards, the paper presents a methodology called SafeNet for helping in extending the safety rate of Human Robot Interaction (HRI) systems using unsafe components, including sensors and controllers. SafeNet considers, in fact, the robotic system as a device at large and applies the principles of functional safety (as in ISO 13489-1) through a set of architectural procedures and implementation rules. The enabled capability of monitoring a network of unsafe devices through redundant computational nodes, allows the usage of any custom sensors and algorithms, usually planned and assembled at therapy planning-time rather than at platform design-time. A case study is presented with an actual implementation of the proposed methodology. A specific architectural solution is applied to an example of robot-assisted upper-limb rehabilitation with online motion tracking. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

A summary of design, policies and operational characteristics for shared bicycle/bus lanes.

Science.gov (United States)

2012-07-01

This report contains the results of an investigation of the design and operation of shared bicycle/bus lanes in municipalities in the United States and other countries. These lanes are designated for use by public transit buses, bicycles, and usually...

Safe Cooperating Cyber-Physical Systems using Wireless Communication

DEFF Research Database (Denmark)

Pop, Paul; Scholle, Detlef; Sljivo, Irfan

2017-01-01

This paper presents an overview of the ECSEL project entitled ―Safe Cooperating Cyber-Physical Systems using Wireless Communication‖ (SafeCOP), which runs during the period 2016–2019. SafeCOP targets safety-related Cooperating Cyber-Physical Systems (CO-CPS) characterised by use of wireless...... detection of abnormal behaviour, triggering if needed a safe degraded mode. SafeCOP will also develop methods and tools, which will be used to produce safety assurance evidence needed to certify cooperative functions. SafeCOP will extend current wireless technologies to ensure safe and secure cooperation...

Public education in safe use of artificial UV radiation sources by the consumer safety institute in the Netherlands

International Nuclear Information System (INIS)

Bruggers, J.H.A.

1987-01-01

The Consumer Safety Institute in the Netherlands is a national institute which operates entirely in the field of home safety. Its main aim exists in reducing the possibility and severity of accidents happening in and around the home, at school and recreational areas. To attain this aim the institute is active in research, handling consumer complaints, education, and advising. To inform and educate consumers about product safety, special leaflets and brochures are published. One of these brochures deals with safety and safe use of artificial UV radiation sources, e.g. UV lamps, UV couches etc. This brochure about suntanning equipment and safety was published recently

Safe Handling and Use of Flammable and Combustible Materials. Module SH-30. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on safe handling and use of flammable and combustible materials is one of 50 modules concerned with job safety and health. This module introduces the student to the hazards of flammable and combustible materials and the measures necessary to control those hazards. Following the introduction, 14 objectives (each keyed to a page…

MIT-Skywalker: Evaluating comfort of bicycle/saddle seat.

Science.gov (United States)

Goncalves, Rogerio S; Hamilton, Taya; Daher, Ali R; Hirai, Hiroaki; Krebs, Hermano I

2017-07-01

The MIT-Skywalker is a robotic device developed for the rehabilitation of gait and balance after a neurological injury. This device has been designed based on the concept of a passive walker and provides three distinct training modes: discrete movement, rhythmic movement, and balance training. In this paper, we present our efforts to evaluate the comfort of a bicycle/saddle seat design for the system's novel actuated body weight support device. We employed different bicycle and saddle seats and evaluated comfort using objective and subjective measures. Here we will summarize the results obtained from a study of fifteen healthy subjects and one stroke patient that led to the selection of a saddle seat design for the MIT-Skywalker.

How safe is the safety paradigm?

NARCIS (Netherlands)

O.A. Arah (Onyebuchi); N.S. Klazinga (Niek)

2004-01-01

textabstractThis paper reviews safety initiatives in the health systems of the UK, Canada, Australia, and the US. Initiatives to tackle safety shortcomings involve public-private collaborations. Patient safety agencies (to institute learning, action and safety culture), adverse

Bicycling to Work and Primordial Prevention of Cardiovascular Risk

DEFF Research Database (Denmark)

Grøntved, Anders; Koivula, Robert W; Johansson, Ingegerd

2016-01-01

of incident obesity, hypertension, hypertriglyceridemia, and impaired glucose tolerance, comparing individuals who commuted to work by bicycle with those who used passive modes of transportation. We also examined the relationship of change in commuting mode with incidence of these clinical risk factors......% CI 0.74-0.91) compared with participants not cycling to work at both times points or who switched from cycling to other modes of transport during follow-up. CONCLUSIONS: These data suggest that commuting by bicycle to work is an important strategy for primordial prevention of clinical cardiovascular...... risk factors among middle-aged men and women....

Evaluation of the dispersion effect in through movement bicycles at signalized intersection via cellular automata simulation

Science.gov (United States)

Jiang, Hang; Ma, Yongjian; Jiang, Lin; Chen, Guozhou; Wang, Dongwei

2018-05-01

At signalized intersection areas, bicycle traffic presents a dispersion feature which may influence the movements of vehicles during peak period. The primary objective of this study is to simulate the dispersion effect in through-movement bicycle traffic at intersection areas and evaluate its influence on through-movement traffic. A cellular automata (CA) model is developed and validated to simulate the operations of through-movement bicycle traffic departing from two types of intersection approaches. Simulation results show that bicycles benefit from the dispersion effect when they depart from the approach with an exclusive right-turn vehicle lane. But when bicycles travel from the approach with a shared right-turn and through vehicle lane, the dispersion effect will result in friction interference and block interference on through-movement vehicles. Bicycle interferences reduce the vehicle speed and increase the delay of through-movement vehicles. The policy implications in regard to the dispersion effect from two types of approaches are discussed to improve the performance of through-movement traffic operations at signalized intersections.

How safe is the safety paradigm?

NARCIS (Netherlands)

Arah, O. A.; Klazinga, N. S.

2004-01-01

This paper reviews safety initiatives in the health systems of the UK, Canada, Australia, and the US. Initiatives to tackle safety shortcomings involve public-private collaborations. Patient safety agencies (to institute learning, action and safety culture), adverse event reporting and, to a lesser

Evaluating SafeClub: can risk management training improve the safety activities of community soccer clubs?

Science.gov (United States)

Abbott, K; Klarenaar, P; Donaldson, A; Sherker, S

2008-06-01

To evaluate a sports safety-focused risk-management training programme. Controlled before and after test. Four community soccer associations in Sydney, Australia. 76 clubs (32 intervention, 44 control) at baseline, and 67 clubs (27 intervention, 40 control) at post-season and 12-month follow-ups. SafeClub, a sports safety-focused risk-management training programme (3x2 hour sessions) based on adult-learning principles and injury-prevention concepts and models. Changes in mean policy, infrastructure and overall safety scores as measured using a modified version of the Sports Safety Audit Tool. There was no significant difference in the mean policy, infrastructure and overall safety scores of intervention and control clubs at baseline. Intervention clubs achieved higher post-season mean policy (11.9 intervention vs 7.5 controls), infrastructure (15.2 vs 10.3) and overall safety (27.0 vs 17.8) scores than did controls. These differences were greater at the 12-month follow-up: policy (16.4 vs 7.6); infrastructure (24.7 vs 10.7); and overall safety (41.1 vs 18.3). General linear modelling indicated that intervention clubs achieved statistically significantly higher policy (prisk-management practice, in a sustainable way.

Assessing the Bicycle Network in St. Louis: A PlaceBased User-Centered Approach

Directory of Open Access Journals (Sweden)

Bram Boettge

2017-02-01

Full Text Available To transition towards sustainability and increase low-impact transportation, city planners are integrating bicycle infrastructure in urban landscapes. Yet, this infrastructure only promotes cycling according to how well it is sited within a specific city. How to best site bicycle facilities is essential for sustainability planning. We review approaches to assessing and siting new bicycle facilities. Following sustainability science, we argue that active cyclists should be consulted to incorporate users’ site-specific knowledge into bicycle infrastructure assessments. We then pilot an approach that surveys cyclists concerning level of stress along routes ridden in St. Louis, MO, USA. Among the active cyclists surveyed (n = 89, we found stress correlates with speed limit, roadway classification, and number of lanes. Although cyclists surveyed in St. Louis prefer roads with bike lanes over roads with sharrows or no infrastructure, the presence of bicycle infrastructure had no correlation with reported levels of stress. The piloted survey and spatial analytic tool are transferable to other localities. For planners, the maps generated by this participant data approach identify high-stress routes as targets of new infrastructure or information to direct cyclists to safer routes. For bicyclists, the maps generated identify low-stress routes for recreation and commuting.

Traumatic Globe Subluxation and Intracranial Injury Caused by Bicycle Brake Handle

OpenAIRE

Poroy; Cibik; Yazici

2016-01-01

Introduction Penetration of a bicycle brake handle into the orbit is a rare and serious type of trauma. Globe subluxation due to such trauma has not been previously reported. Case Presentation A 10-year-old girl presented after falling from a bicycle, which resulted in the handbrake penetrating her right upper eyelid. On examination, the globe was subluxated anteriorly, there was no light perception, and the pupilla was fixed and ...

Bicycles, transportation sustainability, and quality of life.

Science.gov (United States)

2014-01-01

The research presented in this report focuses on the exploration of a variety of objective and subjective quality of life indicators and approaches for bicycle transportation using a mixed methods approach. The authors have created a conceptual frame...

How does a modal shift from short car trips to cycling affect road safety?

NARCIS (Netherlands)

Schepers, J. P.; Heinen, E.

Governments aim to promote a shift from car to bicycle, but concerns about road safety seem to represent an important argument against this encouragement. This study examines the road safety impact of a modal shift from short car trips to cycling in Dutch municipalities. The road safety effect is

Association of Sociodemographic and Perceived Environmental Factors with Public Bicycle Use among Taiwanese Urban Adults

Directory of Open Access Journals (Sweden)

Yung Liao

2016-03-01

Full Text Available Background: This study examined the sociodemographic and perceived environmental factors associated with public bicycle use among Taiwanese urban adults. Methods: A random-digit-dialing telephone-based cross-sectional survey was administered to Taiwanese urban adults aged 20–64 years in 2015. Data on sociodemographic variables, perceived environmental factors (for attributes identified in the International Physical Activity Questionnaire-Environmental Module, and public bicycle use were obtained from 1002 adults in three cities. Adjusted logistic regression was used. Results: After adjustment for potential confounders, the results showed that adults aged 20–29 years (odds ratio (OR = 4.42 with a university degree or higher (OR = 2.03 were more likely to use public bicycles. In addition, adults living in Kaohsiung City were less likely to use public bicycles (OR = 0.24. Adults who saw people being active (OR = 1.76; 95% CI: 1.05–2.86 and had positive aesthetic experiences of their environment (OR = 1.69 were more likely to use public bicycles. Conclusions: Our findings suggest that seeing physically active people and positive aesthetic perceptions of the environment are key factors for developing transportation policies and intervention strategies for promoting public bicycle use among Taiwanese urban adults.

Bicycle-friendly infrastructure planning in Beijing and Copenhagen - between adapting design solutions and learning local planning cultures

DEFF Research Database (Denmark)

Zhao, Chunli; Carstensen, Trine Agervig; Nielsen, Thomas Alexander Sick

2018-01-01

Abstract Cities around the world are constructing bicycle infrastructure to increase cycling. However, identifying efficient design solutions and determining how bicycle infrastructure planning knowledge can be integrated into comprehensive policy remains a challenge. The objective of this paper...... is to shed light on the strengths and weaknesses of current bicycle infrastructure planning in both an experienced city, Copenhagen, and in a less experienced city, Beijing. The paper examines how local design solutions are identified, how efficient they are and to what extent bicycle infrastructure planning...

Hydraulic brake-system for a bicycle

NARCIS (Netherlands)

Van Frankenhuyzen, J.

2007-01-01

The invention relates to a hydraulic brake system for a bicycle which may or may not be provided with an auxiliary motor, comprising a brake disc and brake claws cooperating with the brake disc, as well as fluid-containing channels (4,6) that extend between an operating organ (1) and the brake

Quantitative assessment of probability of failing safely for the safety instrumented system using reliability block diagram method

International Nuclear Information System (INIS)

Jin, Jianghong; Pang, Lei; Zhao, Shoutang; Hu, Bin

2015-01-01

Highlights: • Models of PFS for SIS were established by using the reliability block diagram. • The more accurate calculation of PFS for SIS can be acquired by using SL. • Degraded operation of complex SIS does not affect the availability of SIS. • The safe undetected failure is the largest contribution to the PFS of SIS. - Abstract: The spurious trip of safety instrumented system (SIS) brings great economic losses to production. How to ensure the safety instrumented system is reliable and available has been put on the schedule. But the existing models on spurious trip rate (STR) or probability of failing safely (PFS) are too simplified and not accurate, in-depth studies of availability to obtain more accurate PFS for SIS are required. Based on the analysis of factors that influence the PFS for the SIS, using reliability block diagram method (RBD), the quantitative study of PFS for the SIS is carried out, and gives some application examples. The results show that, the common cause failure will increase the PFS; degraded operation does not affect the availability of the SIS; if the equipment was tested and repaired one by one, the unavailability of the SIS can be ignored; the corresponding occurrence time of independent safe undetected failure should be the system lifecycle (SL) rather than the proof test interval and the independent safe undetected failure is the largest contribution to the PFS for the SIS

Safe driving for teens

Science.gov (United States)

Driving and teenagers; Teens and safe driving; Automobile safety - teenage drivers ... months before taking friends as passengers. Teenage-related driving deaths occur more often in certain conditions. OTHER SAFETY TIPS FOR TEENS Reckless driving is still a ...

Electric motor assisted bicycle as an aerobic exercise machine.

Science.gov (United States)

Nagata, T; Okada, S; Makikawa, M

2012-01-01

The goal of this study is to maintain a continuous level of exercise intensity around the aerobic threshold (AT) during riding on an electric motor assisted bicycle using a new control system of electrical motor assistance which uses the efficient pedaling rate of popular bicycles. Five male subjects participated in the experiment, and the oxygen uptake was measured during cycling exercise using this new pedaling rate control system of electrical motor assistance, which could maintain the pedaling rate within a specific range, similar to that in previous type of electrically assisted bicycles. Results showed that this new pedaling rate control system at 65 rpm ensured continuous aerobic exercise intensity around the AT in two subjects, and this intensity level was higher than that observed in previous type. However, certain subjects were unable to maintain the expected exercise intensity because of their particular cycling preferences such as the pedaling rate. It is necessary to adjust the specific pedaling rate range of the electrical motor assist control according to the preferred pedaling rate, so that this system becomes applicable to anyone who want continuous aerobic exercise.

Safety And Promotion in the Federal Aviation Administration- Enabling Safe and Successful Commercial Space Transportation

Science.gov (United States)

Repcheck, Randall J.

2010-09-01

The United States Federal Aviation Administration’s Office of Commercial Space Transportation(AST) authorizes the launch and reentry of expendable and reusable launch vehicles and the operation of launch and reentry sites by United States citizens or within the United States. It authorizes these activities consistent with public health and safety, the safety of property, and the national security and foreign policy interests of the United States. In addition to its safety role, AST has the role to encourage, facilitate, and promote commercial space launches and reentries by the private sector. AST’s promotional role includes, among other things, the development of information of interest to industry, the sharing of information of interest through a variety of methods, and serving as an advocate for Commercial Space Transportation within the United States government. This dual safety and promotion role is viewed by some as conflicting. AST views these two roles as complementary, and important for the current state of commercial space transportation. This paper discusses how maintaining a sound safety decision-making process, maintaining a strong safety culture, and taking steps to avoid complacency can together enable safe and successful commercial space transportation.

Safe use of nanomaterials

CERN Multimedia

2013-01-01

The use of nanomaterials  is on the increase worldwide, including at CERN. The HSE Unit has established a safety guideline to inform you of the main requirements for the safe handling and disposal of nanomaterials at CERN.   A risk assessment tool has also been developed which guides the user through the process of evaluating the risk for his or her activity. Based on the calculated risk level, the tool provides a list of recommended control measures.   We would therefore like to draw your attention to: Safety Guideline C-0-0-5 - Safe handling and disposal of nanomaterials; and Safety Form C-0-0-2 - Nanomaterial Risk Assessment   You can consult all of CERN’s safety rules and guidelines here. Please contact the HSE Unit for any questions you may have.   The HSE Unit

How the Netherlands became a bicycle nation : users, firms and intermediaries, 1860-1940

NARCIS (Netherlands)

Tjong Tjin Tai, S.E.; Veraart, F.C.A.; Davids, M.

2015-01-01

In 1925, the Netherlands was a country of cyclists and cycle producers, as all classes cycled and almost all cycles were produced domestically. The bicycle was not a Dutch invention and the country had an open economy, and this raises the question ‘how did the Netherlands become a bicycle nation?’

Biking for Health: Results of a Pilot Randomized Controlled Trial Examining the Impact of a Bicycling Intervention on Lower-Income Adults.

Science.gov (United States)

Bernstein, Rebecca; Schneider, Robert; Welch, Whitney; Dressel, Anne; DeNomie, Melissa; Kusch, Jennifer; Sosa, Mirtha

2017-08-01

This pilot study tested the efficacy of a bicycling intervention targeting inactive, low-income, overweight adults on reducing perceived barriers to bicycling, increasing physical activity, and improving health. A nonblinded 2-site randomized controlled trial was conducted in Milwaukee, Wisconsin, in summer 2015. Participants included members from 1 largely Latino community and a second primarily African American neighborhood. A certified bicycling instructor led a 12-week bicycling intervention. Outcome measures including biking-related attitudes, self-reported physical activity, fitness as measured by the 6-minute step test, and biometric data were collected at baseline, 12 weeks, and 20 weeks. Thirty-eight participants completed the study. Barriers to bicycling declined significantly among intervention group participants at 12 weeks with some declines persisting to 20 weeks. Bicycling for leisure or non work transportation increased significantly more in the intervention than control group from baseline to 12 weeks but this difference attenuated by 20 weeks. Both groups increased their fitness between baseline and 12 weeks, with a trend towards greater gains in the bicycling intervention group. No significant change in biometric measurements was seen at either 12 weeks or 20 weeks. Despite the small study size, this bicycling intervention decreased perceived barriers to bicycling and increased bicycling activity in low-income minority participants. These findings support a larger-scale study to measure fitness and health changes from bicycling interventions.

Stereocontrolled synthesis of polyhydroxylated bicyclic azetidines as a new class of iminosugars.

Science.gov (United States)

Malinowski, Maciej; Hensienne, Raphaël; Kern, Nicolas; Tardieu, Damien; Bodlenner, Anne; Hazelard, Damien; Compain, Philippe

2018-06-12

We report herein the development of a stereodivergent route towards polyhydroxylated bicyclic azetidine scaffolds, namely 6-azabicyclo[3.2.0]heptane derivatives. The strategy hinges on a common bicyclic β-lactam precursor, which is forged by way of a rare example of a cationic Dieckmann-type reaction, followed by IBX-mediated desaturation. Substrate-controlled diastereoselective oxidations then allow the divergent preparation of novel iminosugar mimics.

Development of a solar-powered electric bicycle in bike sharing transportation system

Science.gov (United States)

Adhisuwignjo, S.; Siradjuddin, I.; Rifa'i, M.; Putri, R. I.

2017-06-01

The increasing mobility has directly led to deteriorating traffic conditions, extra fuel consumption, increasing automobile exhaust emissions, air pollution and lowering quality of life. Apart from being clean, cheap and equitable mode of transport for short-distance journeys, cycling can potentially offer solutions to the problem of urban mobility. Many cities have tried promoting cycling particularly through the implementation of bike-sharing. Apparently the fourth generation bikesharing system has been promoted utilizing electric bicycles which considered as a clean technology implementation. Utilization of solar power is probably the development keys in the fourth generation bikesharing system and will become the standard in bikesharing system in the future. Electric bikes use batteries as a source of energy, thus they require a battery charger system which powered from the solar cells energy. This research aims to design and implement electric bicycle battery charging system with solar energy sources using fuzzy logic algorithm. It is necessary to develop an electric bicycle battery charging system with solar energy sources using fuzzy logic algorithm. The study was conducted by means of experimental method which includes the design, manufacture and testing controller systems. The designed fuzzy algorithm have been planted in EEPROM microcontroller ATmega8535. The charging current was set at 1.2 Amperes and the full charged battery voltage was observed to be 40 Volts. The results showed a fuzzy logic controller was able to maintain the charging current of 1.2 Ampere with an error rate of less than 5% around the set point. The process of charging electric bike lead acid batteries from empty to fully charged was 5 hours. In conclusion, the development of solar-powered electric bicycle controlled using fuzzy logic controller can keep the battery charging current in solar-powered electric bicycle to remain stable. This shows that the fuzzy algorithm can be used as

On the Implications of Sense of Control over Bicycling : Design of a Physical Stamina-Aware Bike

OpenAIRE

Lee, Chao-Lung; Lee, Da; Cheng, Yun-Maw; Sandnes, Frode Eika; Chen, Li-Chieh; Chen, Wei-Chia

2010-01-01

Bicycling has become a mainstream activity among the environmental aware generation. Bicycling communities have gradually shown interests in quantitative data of the bicycling experiences such as road roughness, inclination, pollution, etc. Bikers utilize these data to infer the possible stamina cost and quality of surroundings. This supports them to make a better decision. This study assumes that fitness level indexed by stamina cost could enhance a biker's sense of c...

Validity of a device designed to measure braking power in bicycle disc brakes.

Science.gov (United States)

Miller, Matthew C; Fink, Philip W; Macdermid, Paul William; Perry, Blake G; Stannard, Stephen R

2017-07-21

Real-world cycling performance depends not only on exercise capacities, but also on efficiently traversing the bicycle through the terrain. The aim of this study was to determine if it was possible to quantify the braking done by a cyclist in the field. One cyclist performed 408 braking trials (348 on a flat road; 60 on a flat dirt path) over 5 days on a bicycle fitted with brake torque and angular velocity sensors to measure brake power. Based on Newtonian physics, the sum of brake work, aerodynamic drag and rolling resistance was compared with the change in kinetic energy in each braking event. Strong linear relationships between the total energy removed from the bicycle-rider system through braking and the change in kinetic energy were observed on the tar-sealed road (r 2  = 0.989; p brake torque and angular velocity sensors are valid for calculating brake power on the disc brakes of a bicycle in field conditions. Such a device may be useful for investigating cyclists' ability to traverse through various terrains.

Stress distribution at the dissimilar metal weld of safety injection nozzle according to safe-end length and SMW thickness

International Nuclear Information System (INIS)

Kim, Tae Jin; Jeong, Woo Chul; Huh, Nam Su

2015-01-01

In the present paper, we evaluate the effects of the safe-end length and thickness of the similar metal weld (SMW) of safety injection nozzles on stress distributions at the dissimilar metal weld (DMW). For this evaluation, we carry out detailed 2-D axisymmetric finite element analyses by considering four different values of the safe-end length and four different values of the thickness of SMW. Based on the results obtained, we found that the SMW thickness affects the axial stresses at the center of the DMW for the shorter safe-end length; on the other hand, it does not affect the hoop stresses. In terms of the safe-end length, the values of the axial and hoop stresses at the inner surface of the DMW center increase as the safe-end length increases. In particular, for the cases considered in the present study, the stress distributions at the DMW center can be categorized according to certain values of safe-end length

Which environmental factors most strongly influence a street's appeal for bicycle transport among adults? A conjoint study using manipulated photographs.

Science.gov (United States)

Mertens, Lieze; Van Dyck, Delfien; Ghekiere, Ariane; De Bourdeaudhuij, Ilse; Deforche, Benedicte; Van de Weghe, Nico; Van Cauwenberg, Jelle

2016-09-01

Micro-environmental factors (specific features within a streetscape), instead of macro-environmental factors (urban planning features), are more feasible to modify in existing neighborhoods and thus more practical to target for environmental interventions. Because it is often not possible to change the whole micro-environment at once, the current study aims to determine which micro-environmental factors should get the priority to target in physical environmental interventions increasing bicycle transport. Additionally, interaction effects among micro-environmental factors on the street's appeal for bicycle transport will be determined. In total, 1950 middle-aged adults completed a web-based questionnaire consisting of a set of 12 randomly assigned choice tasks with manipulated photographs. Seven micro-environmental factors (type of cycle path, speed limit, speed bump, vegetation, evenness of the cycle path surface, general upkeep and traffic density) were manipulated in each photograph. Conjoint analysis was used to analyze the data. Providing streets with a cycle path separated from motorized traffic seems to be the best strategy to increase the street's appeal for adults' bicycle transport. If this adjustment is not practically feasible, micro-environmental factors related to safety (i.e. speed limit, traffic density) may be more effective in promoting bicycle transport than micro-environmental factors related to comfort (i.e. evenness of the cycle path surface) or aesthetic (i.e. vegetation, general upkeep). On the other hand, when a more separated cycle path is already provided, micro-environmental factors related to comfort or aesthetic appeared to become more prominent. Findings obtained from this research could provide advice to physical environmental interventions about which environmental factors should get priority to modify in different environmental situations. The study was approved by the Ethics Committee of the Ghent University Hospital. B

Effect of bicycle saddle designs on the pressure to the perineum of the bicyclist.

Science.gov (United States)

Lowe, Brian D; Schrader, Steven M; Breitenstein, Michael J

2004-06-01

Increasing awareness of an association between bicycling and male sexual dysfunction has led to the appearance of a variety of bicycle saddles that share the design objective of reducing pressure in the groin of the cyclist by removal of the narrow protruding nose of the saddle. This study compared three of these saddle designs to a traditional sport/road racing saddle with a narrow protruding nose in terms of pressure in the region of the perineum (groin) of the cyclist. Saddle, pedal, and handlebar contact pressure were measured from 33 bicycle police patrol officers pedaling a stationary bicycle at a controlled cadence and workload. Pressure was characterized over the saddle as a whole and over a region of the saddle assumed to represent pressure on the cyclist's perineum located anteriorly to the ischial tuberosities. The traditional sport/racing saddle was associated with more than two times the pressure in the perineal region than the saddles without a protruding nose (P perineum of the bicyclist.

Wireless controller and smartphone based interaction system for electric bicycles.

Directory of Open Access Journals (Sweden)

Jorge REVUELTA HERRERO

2016-07-01

Full Text Available Throughout the last years, great improvements have been made in the automotive industry, a sector with a high impact in both economics and social environments. Many development efforts have targeted on satisfying the need of providing smart environments to the end user in vehicles, such as cars. This paper proposes a brand-new solution in the automotive field, consisting of a new product family which aims to transform the traditional bicycle to an electric bicycle using an architecture that provides an adaptive environment to the user, improving the driving experience enabling value-added services.

Traumatic Globe Subluxation and Intracranial Injury Caused by Bicycle Brake Handle.

Science.gov (United States)

Poroy, Ceren; Cibik, Cansu; Yazici, Bulent

2016-09-01

Penetration of a bicycle brake handle into the orbit is a rare and serious type of trauma. Globe subluxation due to such trauma has not been previously reported. A 10-year-old girl presented after falling from a bicycle, which resulted in the handbrake penetrating her right upper eyelid. On examination, the globe was subluxated anteriorly, there was no light perception, and the pupilla was fixed and dilated. Radiologic studies revealed orbitonasal fractures, hemorrhage, emphysema in the orbit and cranium, and rupture of the extraocular muscles. The globe was replaced into the orbit with the help of lateral cantholysis and orbital septotomy. During 22 months of follow-up, the globe remained intact, but total loss of vision, blepharoptosis, and extraocular motility restriction persisted. This case and previous reports show that bicycle brake handles can cause severe, penetrating orbital and cerebral traumas that can result in vision loss or fatality. Brake handles should be designed to protect bicyclists from such injuries.

SAFE-KBS, Substantiating the safety of systems containing knowledge-based components

International Nuclear Information System (INIS)

Mesa, E.; Jimenez, A.

1998-01-01

The overall objective of the Safe-KBS project is to develop generic development and certification methodologies that allow the introduction of knowledge-based components in safety-related applications. The expert system technology presents a set of features, such as the capability to provide the rationale for its conclusions, that may significantly contribute to the new operation support systems. Nevertheless, the use of this technology in safety-related applications is limited by the lack of recognised methodologies and standards that allow a formal demonstration of the quality and reliability of these systems, as required for obtaining the approval for their use at nuclear power plants. The development methodology is structured in three hierarchical levels: life cycle model, i.e., processes and activities constituting the life cycle, life cycle plans, i.e., tasks, and support packages, i.e., set of techniques and methods to perform certain activities or tasks. The certification methodology consists of a set of certification requirements and a certification scheme for demonstrating the compliance with these requirements. This project was developed within the European framework ESPRIT, with the collaboration of Sextant, Cise, Qualience, Ilog, Computes, DNV and Uninfo. (Author)

Design Analysis And Applications Of A Regenerative Bicycle Ergometer

Directory of Open Access Journals (Sweden)

Chukwuneke J. L.

2015-08-01

Full Text Available Man needs to do some form of physical work in other to remain healthy this work is similar to the work done by any machine or equipment and thus should be channeled to give useful output but rather it is usually dissipated into the environment in form of heat. The regenerative bicycle ergometer takes advantage of the greater power generated by the limbs and arms thus conserves converts and stores the energy dissipated by the rider with an ideal mechanical advantage of 7.6 it strategically uses simple mechanisms to magnify its work and then converts this mechanical energy into electrical energy by the use of a dynamo with a speed ratio of 108.5 and a transmission efficiency of 89 the rider pedals 27rpm to obtain the dynamos rated input of 2600rpm giving an output of 12.6volts. The regenerative bicycle ergometer is designed and constructed to perform all the core functions of a bicycle ergometer having an allowable load of 116.5kg and a maximum resistance of 65.33N which is equivalent to a mass of 6.66kg. The energy converted is stored in a 12volts battery making its use flexible clean and meeting the energy demands of man.

The different ways to get on and off a bicycle for young and old

NARCIS (Netherlands)

Dubbeldam, R.; Baten, C. T.M.; Straathof, P.T.C.; Buurke, J. H.; Rietman, J. S.

2017-01-01

In the Netherlands, each year 12,000 older cyclists require medical attention due to a single-bicycle accident where no other party is directly involved. Most of these accidents occur at low cycling velocities and 20% occur during (dis)mounting the bicycle. Little is known about the strategies and

Evaluation of a promotional strategy to increase bicycle helmet use by children.

Science.gov (United States)

Parkin, P C; Spence, L J; Hu, X; Kranz, K E; Shortt, L G; Wesson, D E

1993-04-01

Bicycle-related head injuries are an important cause of death and disability, despite the availability of helmets. The objective of this study was to evaluate the effectiveness of a school-based bicycle helmet promotion program in increasing helmet use by children while controlling for secular trends. Two high-income and two low-income schools in an urban Canadian community were selected to receive a bicycle helmet promotion intervention, with the remaining 18 schools serving as controls. Approximately 1800 observations of bicycling children were made at randomly selected observational sites 2 to 5 months after the intervention to assess changes in behavior. Helmet use at all observation sites tripled from 3.4% (1990, preintervention) to 16% (1991, postintervention). In the high-income intervention area, observed helmet use rose dramatically from 4% to 36% in contrast to the more modest increase in the high-income control area from 4% to 15%. In the low-income intervention area, there was a modest increase from 1% to 7%, but it did not differ from the increase in the low-income control area from 3% to 13%. The program was highly successful in children of high-income families but not in children of low-income families. Developing strategies for low-income families remains a priority.

Study of the health effects of bicycling in an urban atmosphere. Final report

Energy Technology Data Exchange (ETDEWEB)

Waldman, M.; Weiss, S.; Articola, W.

1977-10-14

This report analyzes data on the health effects of bicycling in an urban environment through intensive study of ten healthy male subjects bicycling or driving in systematically varied conditions in the streets of Washington, D.C. Evaluation criteria for available technology and instrumentation are included and a methodology is developed for route selection. Specific air pollutants (carbon monoxide, ozone, sulfates, nitrates, and particulates) are measured concurrently with exposure and subsequent changes in health status identified through pulmonary function testing, cardiovascular testing, and blood and symptoms analysis. The report concludes that no major adverse short-term health effects were noted for ten healthy male subjects while bicycling or driving in levels of pollution and thermal stress encountered during the study period. Recommendations for further research are also presented.

Bicycle Design : A different approach to improving on the world human powered speed records

NARCIS (Netherlands)

Epema, H.K.; Van den Brand, S.; Gregoor, W.; Kooijman, J.D.G.; Pereboom, H.P.; Wielemaker, D.C.; Van der Zweep, C.J.

2012-01-01

The current International Human Powered Vehicle Association world records for faired bicycles stand at 133.284km/h for the 200m flying start speed record and 91.562 km for the hour record. Traditionally the recumbent bicycles that have been developed for breaking one of either of these records have

Bicycle-Related Shoulder Injuries: Etiology and the Need for Protective Gear.

Science.gov (United States)

Goldstein, Yariv; Dolkart, Oleg; Kaufman, Ehud; Amar, Eyal; Sharfman, Zachary T; Rath, Ehud; Mozes, Gavriel; Maman, Eran

2016-01-01

The popularity of bicycle riding for recreation, exercise and transportation has grown enormously in recent years, which has led to an increased incidence of bicycle-related injuries. While these injuries involve mainly the musculoskeletal system, data on shoulder-specific injuries incurred while bike riding are lacking. Classifying these shoulder injuries may provide insight and assistance in the creation and implementation of effective protective gear and measures. To investigate the types and mechanisms of shoulder injuries among cyclists. This study retrospectively examined all cyclists who incurred shoulder injuries while riding and were admitted to the emergency department and shoulder clinic between January 2008 and November 2013. The study included 157 subjects with various bicycle-related shoulder injuries treated with either conservative or surgical measures. Eighty-four percent of injuries were caused by a direct blow to the shoulder, 7% by falling on an outstretched hand, 6% were traction injuries, and 3% were due to hyperabduction. Nine different clinical types of injury were observed; the most common injuries were clavicle fractures (32%), followed by acromioclavicular joint dislocations (22%), rotator cuff tears (22%), and humeral fractures (8%). Fifty-one percent of subjects were managed with conservative care and the remaining patients required surgical interventions. Shoulder injuries incurred while riding a bicycle span the entire spectrum of shoulder injuries and often result in debilitating conditions. Although the use of helmets is increasing, there is currently no effective protective gear or measures to prevent riders from suffering shoulder injuries.

CERN safety week

CERN Multimedia

DG Unit

2009-01-01

Following an increase in the number of accidents in 2008, the Safety Commission is organising a CERN safety week from 8 to 12 June for riders of bicycles, scooters and motorbikes. We invite you to take part in the programme, which will be held in the Main Building (Bldg. 500) and will consist of an exhibition, organised events and hands-on activities, including demonstrations of emergency braking, a driving simulator, simulation of what it feels like to drive under the influence of alcohol, demonstrations by the Fire Brigade, video projections, etc. There will also be a number of prizes to be won. Please sign up via your DSO.

Modelling mode choice in short trips - shifting from car to bicycle

DEFF Research Database (Denmark)

Halldórsdóttir, Katrín; Christensen, Linda; Jensen, Thomas Christian

2011-01-01

-economic variables of a representative sample of the population. The investigated sample includes 11,072 observations. The model considers five alternatives (i.e., car driver, car passenger, public transport, walk and obviously bike), for which level of service variables are calculated through assignment procedures...... relevance of the cost for short trips. Expectedly, the selection of bicycle as mode for short trips is positively related to owning a bicycle and negatively linked to owning one or more cars. Urban density has also positive correlation with the selection of sustainable transport modes....

Safe Routes to School Local School Project: A health evaluation at 10 low-income schools

OpenAIRE

Cooper, Jill F MSW; McMillan, Tracy MPH, PHD

2010-01-01

fe Routes to School National Partnership (Partnership) founded the Local School Project (Project) in 2008 to assist ten schools in lowincome communities to: 1) develop and evaluate a school-based SRTS program, 2) build local capacity to apply for state or federal SRTS funding, and 3) increase safe walking and bicycling to and from the school and in the community. The Centers for Disease Control and Prevention, Kaiser Permanente, and the Robert Wood Johnson Foundation provided funding for the ...

Safe or sorry: Feds criminalize safety breaches, while industry record improves with time

Energy Technology Data Exchange (ETDEWEB)

Collison, M.

2004-05-01

An overview of safety conditions in Canada's oilpatch is provided, inclusive of a review of historical developments of safety practices by the industry itself, and evolving safety legislation by the provincial and federal governments. The general picture that emerges is that while great strides have been made in legislation, training and safety practices, incidents still occur; employees are still injured and sometimes die. In 2003, for example, there were almost 156,000 work-related injuries reported; of these more than 39,000 were serious enough for the worker to miss work beyond the day of the accident. Nearly 52,000 of the injured workers were inexperienced. There were 127 workplace fatalities; of these eight workers were under the age of 25. Vehicle collisions were the source of the greatest number of accidents; 25 per cent of all work-related deaths were due to traffic trauma. The oil and gas industry spawns an incredible range of hazards; everything from bear maulings and badger holes to sour gas leaks, people falling or equipment falling on them, or workers getting caught in moving equipment parts. The federal and provincial governments are major actors in the field of occupational safety, while the industry provides industry-recommended practices through the Petroleum Safety Council. The Council has also developed a basic safety awareness training package to provide smaller companies with effective training tools, and special programs targeted to the needs of new workers and international employees, in an effort to bridge differences in cultural attitudes towards the work environment. English language competence of newcomers to Canada is an area of special concern to the industry, along with a wide variety of safety training programs run by the Petroleum Industry Training Service. The Work Safe Alberta Information Sharing Network (www.worksafely.org) is another useful tool in gaining access to safety consultants, safety e-tools, and safety related

Injury Source and Correlation Analysis of Riders in Car-Electric Bicycle Accidents

Directory of Open Access Journals (Sweden)

Tiefang Zou

2018-01-01

Full Text Available The knowledge about the injury source and correlation of riders in car-electric bicycle accident will be helpful in the cross validation of traces and vehicle safety design. In order to know more information about such kind of knowledge, 57 true car-electric bicycle accidents were reconstructed by PC-Crash and then data on injury information of riders were collected directly from the reconstructed cases. These collected data were validated by some existing research results firstly, and then 4 abnormal cases were deleted according to the statistical method. Finally, conclusions can be obtained according to the data obtained from the remaining 53 cases. Direct injuries of the head and right leg are from the road pavement upon low speed; the source laws of indirect head injuries are not obvious. Upon intermediate and high speed, the injuries of the above parts are from automobiles. Injuries of the left leg, femur, and right knee are from automobiles; left knee injuries are from automobiles, the road pavement and automobiles, respectively, upon low, intermediate, and high speed. The source laws of indirect torso injuries are not obvious upon intermediate and low speed, which are from automobiles upon high speed, while direct torso injuries are from the road pavement. And there is no high correlation between all parts of the injury of riders. The largest correlation coefficient was the head-left femur and left femur-right femur, which was 0.647, followed by the head-right femur (0.638 and head-torso which was 0.617.

Injury Source and Correlation Analysis of Riders in Car-Electric Bicycle Accidents.

Science.gov (United States)

Zou, Tiefang; Yi, Liang; Cai, Ming; Hu, Lin; Li, Yuelin

2018-01-01

The knowledge about the injury source and correlation of riders in car-electric bicycle accident will be helpful in the cross validation of traces and vehicle safety design. In order to know more information about such kind of knowledge, 57 true car-electric bicycle accidents were reconstructed by PC-Crash and then data on injury information of riders were collected directly from the reconstructed cases. These collected data were validated by some existing research results firstly, and then 4 abnormal cases were deleted according to the statistical method. Finally, conclusions can be obtained according to the data obtained from the remaining 53 cases. Direct injuries of the head and right leg are from the road pavement upon low speed; the source laws of indirect head injuries are not obvious. Upon intermediate and high speed, the injuries of the above parts are from automobiles. Injuries of the left leg, femur, and right knee are from automobiles; left knee injuries are from automobiles, the road pavement and automobiles, respectively, upon low, intermediate, and high speed. The source laws of indirect torso injuries are not obvious upon intermediate and low speed, which are from automobiles upon high speed, while direct torso injuries are from the road pavement. And there is no high correlation between all parts of the injury of riders. The largest correlation coefficient was the head-left femur and left femur-right femur, which was 0.647, followed by the head-right femur (0.638) and head-torso which was 0.617.

Advisory Material for the IAEA Regulations for the Safe Transport of Radioactive Material (2012 Ed.). Specific Safety Guide

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-06-15

This Safety Guide provides recommendations and guidance on achieving and demonstrating compliance with IAEA Safety Standards Series No. SSR-6, Regulations for the Safe Transport of Radioactive Material (2012 Edition), which establishes the requirements to be applied to the national and international transport of radioactive material. Transport is deemed to comprise all operations and conditions associated with and involved in the movement of radioactive material, including the design, fabrication and maintenance of packaging, and the preparation, consigning, handling, carriage, storage in transit and receipt at the final destination of packages. This publication supersedes IAEA Safety Standards Series No. TS-G-1.1 Rev. 1, which was issued in 2008.

Allene functionalization via bicyclic methylene aziridines.

Science.gov (United States)

Boralsky, Luke A; Marston, Dagmara; Grigg, R David; Hershberger, John C; Schomaker, Jennifer M

2011-04-15

The oxidative functionalization of olefins is a common method for the formation of vicinal carbon-heteroatom bonds. However, oxidative methods to transform allenes into synthetic motifs containing three contiguous carbon-heteroatom bonds are much less developed. This paper describes the use of bicyclic methylene aziridines (MAs), prepared via intramolecular allene aziridination, as scaffolds for functionalization of all three allene carbons. © 2011 American Chemical Society

How safe are nuclear plants? How safe should they be?

International Nuclear Information System (INIS)

Kouts, H.

1988-01-01

It has become customary to think about safety of nuclear plants in terms of risk as defined by the WASH-1400 study that some of the implications for the non-specialist escape our attention. Yet it is known that a rational program to understand safety, to identify unsafe events, and to use this kind of information or analysis to improve safety, requires us to use the methods of quantitative risk assessment. How this process can be made more understandable to a broader group of nontechnical people and how can a wider acceptance of the results of the process be developed have been questions under study and are addressed in this report. These are questions that have been struggled with for some time in the world of nuclear plant safety. The Nuclear Regulatory Commission examined them for several years as it moved toward developing a position on safety goals for nuclear plants, a requirement that had been assigned it by Congress. Opinion was sought from a broad spectrum of individuals, within the field of nuclear power and outside it, on the topic that was popularly called, ''How safe is safe enough?'' Views were solicited on the answer to the question and also on the way the answer should be framed when it was adopted. This report discusses the public policy and its implementation

The safe home project.

Science.gov (United States)

Arphorn, Sara; Jiraniratisai, Sopaphan; Rungtakul, Rungsri; Phutta, Nikom

2011-12-01

The Thai Health Promotion Foundation supported the Improvement of Quality of Life of Informal Workers project in Ban Luang District, Amphur Photaram, Ratchaburi Province. There were many informal workers in Ban Luang District. Sweet-crispy fish producers in Ban Luang were the largest group among the sweet-crispy fish producers in Thailand. This project was aimed at improving living and working conditions of informal workers, with a focus on the sweet-crispy fish group. Good practices of improved living and working conditions were used to help informal workers build safe, healthy and productive work environments. These informal workers often worked in substandard conditions and were exposed to various hazards in the working area. These hazards included risk of exposure to hot work environment, ergonomics-related injuries, chemical hazards, electrical hazards etc. Ergonomics problems were commonly in the sweet-crispy fish group. Unnatural postures such as prolonged sitting were performed dominantly. One hundred and fifty informal workers participated in this project. Occupational health volunteers were selected to encourage occupational health and safety in four groups of informal workers in 2009. The occupational health volunteers trained in 2008 were farmers, beauty salon workers and doll makers. The occupational health and safety knowledge is extended to a new informal worker group: sweet-crispy fish producer, in 2009. The occupational health and safety training for sweet-crispy fish group is conducted by occupational health volunteers. The occupational health volunteers increased their skills and knowledge assist in to make safe home and safe community through participatory oriented training. The improvement of living and working condition is conducted by using a modified WISH, Work Improvement for Safe Home, checklist. The plans of improvement were recorded. The informal workers showed improvement mostly on material handling and storage. The safe uses and safe

Utilizing the Bicycle for Non-Traditional Activities

Science.gov (United States)

Maina, Michael P.; Maina, Julie Schlegel; Sebek, Ludek; Hoffmanova, Jana; Kane, Jennifer Jackson

2012-01-01

This article examines the bicycle as not simply a means of transportation or as an exercise device, but rather as a vehicle for teambuilding and problem solving activities within a physical education curriculum. The activities described in this article focus on bike-centered initiatives that foster creative problem solving. They have universal…

The management system for the safe transport of radioactive material. Safety guide

International Nuclear Information System (INIS)

2008-01-01

The purpose of this Safety Guide is to provide information to organizations that are developing, implementing or assessing a management system for activities relating to the transport of radioactive material. Such activities include, but are not limited to, design, fabrication, inspection and testing, maintenance, transport and disposal of radioactive material packaging. This publication is intended to assist those establishing or improving a management system to integrate safety, health, environmental, security, quality and economic elements to ensure that safety is properly taken into account in all activities of the organization. Contents: 1. Introduction; 2. Management system; 3. Management responsibility; 4. Resource management; 5. Process implementation; 6. Measurement, assessment and improvement; Appendix: Graded approach for management systems for the safe transport of radioactive materials; Annex I: Two examples of management systems; Annex II: Examples of management system standards; Annex III: Example of a documented management system (or quality assurance programme) for an infrequent consignor; Annex IV: Example of a documented management system (or quality assurance programme) description for an infrequent carrier; Annex V: Example of a procedure for control of records; Annex VI: Example of a procedure for handling packages containing radioactive materials, including receipt and dispatch; Annex VII: Example of a packaging maintenance procedure in a complex organization; Annex VIII: Example of an internal audit procedure in a small organization; Annex IX: Example of a corrective and preventive action procedure

Conversion Of An Ordinary N Bicycle Into An Electric Bike And Related Research

Directory of Open Access Journals (Sweden)

Marius Janavičius

2014-05-01

Full Text Available An electric bicycle as a transport and leisure vehicle is expected to have a promising future. Currently, he market offers a great choice of factory electric bicycles and conversion kits to remake an ordinary bicycle into an electric bike. Also, the increasing number of electric vehicles is determined by the reduction in costs for manufacturing of batteries and an evolution in battery technology. This article presents the implementation of an electric bike by selecting the “Golden Motor Technology” company’s electric front wheel conversion kit MagicPie3 and 16 cell 10Ah LiFePO4 battery. After installation of the engine and other components, experiments were conducted to evaluate the performance characteristics of the electric bike and check the manufacturer’s specifications.

Dementia - keeping safe in the home

Science.gov (United States)

... this page: //medlineplus.gov/ency/patientinstructions/000031.htm Dementia - keeping safe in the home To use the ... make sure the homes of people who have dementia are safe for them. Safety Tips for the ...

Promoting job safety for workers with intellectual disabilities: the staying safe at work training curriculum.

Science.gov (United States)

Dewey, Robin

2011-01-01

In the United States, approximately 125,000 people with disabilities are employed through Community Rehabilitation Programs in manufacturing, assembly, and service jobs. These jobs have significant hazards and, consequently, the workers are at risk of injury. Training that empowers workers to participate in prevention efforts can help reduce work-related injuries. In general this kind of health and safety training in the United States is limited. It is even more so for workers with intellectual disabilities, in part because there have not been programs for teaching individuals with cognitive challenges health and safety skills, adapted to their learning needs. This paper describes the development and promotion of the Staying Safe at Work curriculum of UC Berkeley's Labor Occupational Health Program, which is designed for use by support agencies and employers of workers with intellectual disabilities. The goal of this program is to teach these workers essential occupational safety and health skills in a manner they can understand.

Working Safely at Some Times and Unsafely at Others: A Typology and Within-Person Process Model of Safety-Related Work Behaviors.

Science.gov (United States)

Beus, Jeremy M; Taylor, William D

2017-06-22

Why do individuals choose to work safely in some instances and unsafely in others? Though this inherently within-person question is straightforward, the preponderance of between-person theory and research in the workplace safety literature is not equipped to answer it. Additionally, the limited way in which safety-related behaviors tend to be conceptualized further restricts understanding of why individuals vary in their safety-related actions. We use a goal-focused approach to conceptually address this question of behavioral variability and contribute to workplace safety research in 2 key ways. First, we establish an updated typology of safety-related behaviors that differentiates behaviors based on goal choice (i.e., safe vs. unsafe behaviors), goal-directedness (i.e., intentional vs. unintentional behaviors), and the means of goal pursuit (i.e., commission vs. omission and promotion vs. prevention-focused behaviors). Second, using an expectancy-value theoretical framework to explain variance in goal choice, we establish within-person propositions stating that safety-related goal choice and subsequent behaviors are a function of the target of safety-related behaviors, the instrumentality and resource requirement of behaviors, and the perceived severity, likelihood, and immediacy of the threats associated with behaviors. Taken together, we define what safety-related behaviors are, explain how they differ, and offer propositions concerning when and why they may vary within-persons. We explore potential between-person moderators of our theoretical propositions and discuss the practical implications of our typology and process model of safety-related behavior. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Injuries to Cyclists due to a Dog-Bicycle Interaction.

Science.gov (United States)

Loder, Randall T; Yaacoub, Alan P

2018-05-01

 Both dogs and bicycles are common in our society and thus a dog-bicycle interaction resulting in an injury to a cyclist is possible. It was the purpose of this study to investigate such injuries.  The National Electronic Injury Surveillance System (NEISS) data for the 10-year period from 2006 through 2015 associated with bicycles were accessed. Injuries involving dogs were identified and the mechanism of injury determined. Due to the stratified and weighted nature of the NEISS data, statistical analyses were performed with SUDAAN 10 software (RTI International, Research Triangle Park, North Carolina, United States). A p  dogs were involved in 35,254 (0.67%) cases. The average age for those involved with a dog was 33.2 years and it was 25.5 years for those in which dogs were not involved. There were more females in the dog group (34.1 vs. 27.6%). Dog involvement increased from ages 0 to 14 years, then decreased until the age of 20 years and then progressively increased. Dog-associated injuries most frequently occurred away from home, involved the knee and distal lower extremity, 49.1% sustaining dog bites. Dog bites were more common in younger individuals. Four injury mechanisms (chased by a dog, hit/collided with a dog, swerved/tried to avoid a dog or riding with a dog) accounted for 97.5% of the injuries. Those chased by a dog were younger, more commonly released from the emergency department, had an injury involving the lower extremity and frequently sustained a bite. The most severe injuries were in those who swerved/tried to avoid a dog or hit a dog.  Approximately 1% of injuries to bicyclists are associated with dogs; one-half sustained a bite. Potential/proposed prevention strategies could be educational materials regarding bicycles and dogs to owners, dog restraint, student/parent education and educational materials in waiting rooms of veterinarians, paediatricians, family practice physicians and emergency rooms. Schattauer GmbH Stuttgart.

A strategic approach to [6,6]-bicyclic lactones

DEFF Research Database (Denmark)

Jepsen, Tue Heesgaard; Glibstrup, Emil; Crestey, Francois Louis Jean

2017-01-01

We report an effective synthetic protocol to access [6,6]-bicyclic lactone moieties through a regio- and stereoselective intramolecular Mizoroki–Heck cross-coupling reaction followed by a 6π-electrocyclization. This method enabled the first synthesis of the elusive CD fragment of the Erythrina...

How safe are nuclear power plants

International Nuclear Information System (INIS)

Danzmann, H.J.

1976-01-01

The question 'how safe are nuclear power plants' can be answered differently - it depends on how the term 'safety' is understood. If the 'safety of supply' is left out as a possibility of interpretation, then the alternative views remain: Operational safety in the sense of reliability and safety of personnel and population. (orig.) [de

Modeling Mixed Bicycle Traffic Flow: A Comparative Study on the Cellular Automata Approach

Directory of Open Access Journals (Sweden)

Dan Zhou

2015-01-01

Full Text Available Simulation, as a powerful tool for evaluating transportation systems, has been widely used in transportation planning, management, and operations. Most of the simulation models are focused on motorized vehicles, and the modeling of nonmotorized vehicles is ignored. The cellular automata (CA model is a very important simulation approach and is widely used for motorized vehicle traffic. The Nagel-Schreckenberg (NS CA model and the multivalue CA (M-CA model are two categories of CA model that have been used in previous studies on bicycle traffic flow. This paper improves on these two CA models and also compares their characteristics. It introduces a two-lane NS CA model and M-CA model for both regular bicycles (RBs and electric bicycles (EBs. In the research for this paper, many cases, featuring different values for the slowing down probability, lane-changing probability, and proportion of EBs, were simulated, while the fundamental diagrams and capacities of the proposed models were analyzed and compared between the two models. Field data were collected for the evaluation of the two models. The results show that the M-CA model exhibits more stable performance than the two-lane NS model and provides results that are closer to real bicycle traffic.

Sensor design for outdoor racing bicycle field testing for human vibration comfort evaluation

International Nuclear Information System (INIS)

Vanwalleghem, Joachim; De Baere, Ives; Van Paepegem, Wim; Loccufier, Mia

2013-01-01

This paper is concerned with the vibrational comfort evaluation of the cyclist when cycling a rough surface. Outdoor comfort tests have so far only been done through instrumenting the bicycle with accelerometers. This work instruments a racing bicycle with custom-made contact force sensors and velocity sensors to acquire human comfort through the absorbed power method. Comfort evaluation is assessed at the hand–arm and seat interface of the cyclist with the bicycle. By means of careful finite-element analysis for designing the force gauges at the handlebar and the seat combined with precise calibration of both force and velocity sensors, all sensors have proven to work properly. Initial field tests are focused on the proper functioning of the designed sensors and their suitability for vibration comfort measurements. Tests on a cobblestone road reveal that the outcome of the absorbed power values is within the same range as those from laboratory tests found in the literature. This sensor design approach for outdoor testing with racing bicycles may give a new interpretation on evaluating the cyclist's comfort since the vibrational load is not only quantified in terms of acceleration but also in terms of force and velocity at the bicycle–cyclist contact points. (paper)

Bridging the divide between fire safety research and fighting fire safely: How do we convey research innovation to contribute more effectively to wildland firefighter safety?

Science.gov (United States)

Theodore Ted Adams; Bret W. Butler; Sara Brown; Vita Wright; Anne Black

2017-01-01

Creating a safe workplace for wildland firefighters has long been at the centre of discussion for researchers and practitioners. The goal of wildland fire safety research has been to protect operational firefighters, yet its contributions often fall short of potential because much is getting lost in the translation of peer-reviewed results to potential and intended...

Harvesting energy from the counterbalancing (weaving) movement in bicycle riding.

Science.gov (United States)

Yang, Yoonseok; Yeo, Jeongjin; Priya, Shashank

2012-01-01

Bicycles are known to be rich source of kinetic energy, some of which is available for harvesting during speedy and balanced maneuvers by the user. A conventional dynamo attached to the rim can generate a large amount of output power at an expense of extra energy input from the user. However, when applying energy conversion technology to human powered equipments, it is important to minimize the increase in extra muscular activity and to maximize the efficiency of human movements. This study proposes a novel energy harvesting methodology that utilizes lateral oscillation of bicycle frame (weaving) caused by user weight shifting movements in order to increase the pedaling force in uphill riding or during quick speed-up. Based on the 3D motion analysis, we designed and implemented the prototype of an electro-dynamic energy harvester that can be mounted on the bicycle's handlebar to collect energy from the side-to-side movement. The harvester was found to generate substantial electric output power of 6.6 mW from normal road riding. It was able to generate power even during uphill riding which has never been shown with other approaches. Moreover, harvesting of energy from weaving motion seems to increase the economy of cycling by helping efficient usage of human power.

BUGS at work : a bicycle user group guide

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-07-01

This guide provides practical advice to cyclists on how start a Bicycle User Group (BUG) at their workplace. It offers tools to encourage employers to be proactive in improving facilities in support of cycle commuting. Several BUGs across Canada have worked towards getting better bicycle parking, lockers and shower facilities at their workplace. Other incentives include policies such as flexible work hours for cyclist commuters; casual dress on Friday; reimbursement for the subsidized cost of free parking provided by employers; and, use of a company car if needed for company business during the work day. The advantages to employers include: reduced health care costs because cyclists are physically fit; decreased absenteeism; increased productivity; reduced parking costs; lower company transportation bills; and, a greener corporate image. BUGs provide cycling information ranging from cycling maps to pamphlets and they raise cycle awareness. This guide includes cycling survey samples and examples of successful BUG activities across Canada. refs., tabs., figs.

Children's Perception of Gap Affordances: Bicycling Across Traffic-Filled Intersections in an Immersive Virtual Environment

Science.gov (United States)

Plumert, Jodie M.; Kearney, Joseph K.; Cremer, James F.

2004-01-01

This study examined gap choices and crossing behavior in children and adults using an immersive, interactive bicycling simulator. Ten- and 12-year-olds and adults rode a bicycle mounted on a stationary trainer through a virtual environment consisting of a street with 6 intersections. Participants faced continuous cross traffic traveling at 25mph…

More than a Safe Space

Science.gov (United States)

Sadowski, Michael

2016-01-01

Over the past three decades, much of the conversation about LGBTQ students in schools has centered on safety--anti-bullying policies, the "safe space" of gay-straight alliances, and "safe zones" marked by rainbow-colored stickers on classroom doors. In this article, Michael Sadowski argues that it's time to move beyond safety…

Ergonomic Analysis of UI’s BicyclesUsing Posture Evaluation Index (PEI Method in Virtual Environment

Directory of Open Access Journals (Sweden)

Erlinda Muslim

2010-10-01

Full Text Available This research was conducted to study ergonomic aspect from University of Indonesia bicycle in virtual environment. Software Jack 6.0 was used to analyze it. PEI was used as approach that integrated the results of three methods: Lower Back Analysis, Ovako Working Posture Analysis, and Rapid Upper Limb Assessment. The research objective is to evaluate existing design of University of Indonesia bicycle and to determine the most ergonomic redesign which concern with handlebar height and saddle height modification. The result showed that the most ergonomic design of University of Indonesia bicycle is the one with the highest handlebar height (22 cm and the lowest saddle height (11 cm.

How Safe Are Our Libraries?

Science.gov (United States)

St. Lifer, Evan

1994-01-01

Addresses issues of safety and security in libraries. Topics discussed include keeping library collections safe; patron behavioral problems; factoring loss into the budget; staff theft; access versus security; apathy regarding library crime; a need for a unified security apparatus; preventive measures; staff and patron safety; and a…

Exploring the Chemistry of Bicyclic Isoxazolidines for the Multicomponent Synthesis of Glycomimetic Building Blocks.

Science.gov (United States)

Hoogenboom, Jorin; Lutz, Martin; Zuilhof, Han; Wennekes, Tom

2016-10-07

Starting from a chiral furanone, the nitrone-olefin [3 + 2] cycloaddition can be used to obtain bicyclic isoxazolidines for which we report a set of reactions to selectively modify each functional position. These synthetically versatile bicyclic isoxazolidines allowed us to obtain complex glycomimetic building blocks, like iminosugars, via multicomponent chemistry. For example, a library of 20 pipecolic acid derivatives, a recurring motif in various prescription drugs, could be obtained via a one-pot Staudinger/aza-Wittig/Ugi three-component reaction of a bicyclic isoxazolidine-derived azido-hemiacetal. Notably, specific pipecolic acids in this library were obtained via hydrolysis of an unique tricyclic imidate side product of the Ugi reaction. The azido-hemiacetal was also converted into an aza-C-glycoside iminosugar via an unprecendented one-pot Staudinger/aza-Wittig/Mannich reaction.

Supplement to safety analysis report. 306-W building operations safety requirement

International Nuclear Information System (INIS)

Richey, C.R.

1979-08-01

The operations safety requirements (OSRs) presented in this report define the conditions, safe boundaries, and management control needed for safely conducting operations with radioactive materials in the Pacific Northwest Laboratory (PNL) 306-W building. The safety requirements are organized in five sections. Safety limits are safety-related process variables that are observable and measurable. Limiting conditions cover: equipment and technical conditions and characteristics of the facility and operations necessary for continued safe operation. Surveillance requirements prescribe the requirements for checking systems and components that are essential to safety. Equipment design controls require that changes to process equipment and systems be independently checked and approved to assure that the changes will have no adverse effect on safety. Administrative controls describe and discuss the organization and administrative systems and procedures to be used for safe operation of the facility. Details of the implementation of the operations safety requirements are prescribed by internal PNL documents such as criticality safety specifications and radiation work procedures

The safe transport of radioactive materials

CERN Document Server

Gibson, R

1966-01-01

The Safe Transport of Radioactive Materials is a handbook that details the safety guidelines in transporting radioactive materials. The title covers the various regulations and policies, along with the safety measures and procedures of radioactive material transport. The text first details the 1963 version of the IAEA regulation for the safe transport of radioactive materials; the regulation covers the classification of radionuclides for transport purposes and the control of external radiation hazards during the transport of radioactive materials. The next chapter deals with concerns in the im

Using Smartphones to Collect Bicycle Travel Data in Texas

Science.gov (United States)

2012-08-08

Researchers believed that if smartphones could prove to be an effective tool for collecting bicycle travel data, the information could be used for aiding decision making as to what types of facilities users prefer and guiding decisions about future f...

preparation of bicyclic lactones using lewis acids catalyzed ene

African Journals Online (AJOL)

Administrator

The synthesis of the cis-fused bicyclic lactones relies extensively on the Lewis acid ... having an allylic hydrogen (an"ene") and a compound containing an electron .... observed that the lithium enolate obtained from 3-methyl-2(5H)- furanone ...

Inherently safe reactors

International Nuclear Information System (INIS)

Maartensson, Anders

1992-01-01

A rethinking of nuclear reactor safety has created proposals for new designs based on inherent and passive safety principles. Diverging interpretations of these concepts can be found. This article reviews the key features of proposed advanced power reactors. An evaluation is made of the degree of inherent safety for four different designs: the AP-600, the PIUS, the MHTGR and the PRISM. The inherent hazards of today's most common reactor principles are used as reference for the evaluation. It is concluded that claims for the new designs being inherently, naturally or passively safe are not substantiated by experience. (author)

Safe physical human robot interaction- past, present and future

International Nuclear Information System (INIS)

Pervez, Aslam; Ryu, Jeha

2008-01-01

When a robot physically interacts with a human user, the requirements should be drastically changed. The most important requirement is the safety of the human user in the sense that robot should not harm the human in any situation. During the last few years, research has been focused on various aspects of safe physical human robot interaction. This paper provides a review of the work on safe physical interaction of robotic systems sharing their workspace with human users (especially elderly people). Three distinct areas of research are identified: interaction safety assessment, interaction safety through design, and interaction safety through planning and control. The paper then highlights the current challenges and available technologies and points out future research directions for realization of a safe and dependable robotic system for human users

Automatic Stabilization of a Riderless Bicycle using the Active Disturbance Rejection Control Approach

Directory of Open Access Journals (Sweden)

Mauro Baquero-Suárez

2017-12-01

Full Text Available This work proposes an ADRC (Active Disturbance Rejection Control strategy by disturbance extended observers to stabilize a moving riderless bicycle with a variant forward speed. Although the bicycle has an unstable and non-linear dynamics when in its upright position, which can be modeled as a LPV (Linear-Parameter-Varying system that depends on the forward speed, a simplified time-invariant and lumped-parameter model, with an nominal constant forward speed is used in the controller design. ADRC scheme groups discrepancies between the simplified model and the plant, with external disturbances into an equivalent additive unified disturbance signal at input, which is estimated via the observer and rejected through a linear control law. The effectiveness of this strategy is validated by a co-simulation between ADAMS and MATLAB, which exhibits a high performance and robustness in a virtual dynamic model of the bicycle, submitted to severe external disturbances and parameter variations.

Ergonomics: safe patient handling and mobility.

Science.gov (United States)

Hallmark, Beth; Mechan, Patricia; Shores, Lynne

2015-03-01

This article reviews and investigates the issues surrounding ergonomics, with a specific focus on safe patient handling and mobility. The health care worker of today faces many challenges, one of which is related to the safety of patients. Safe patient handling and mobility is on the forefront of the movement to improve patient safety. This article reviews the risks associated with patient handling and mobility, and informs the reader of current evidence-based practice relevant to this area of care. Copyright © 2015 Elsevier Inc. All rights reserved.

Bicycle safety

Science.gov (United States)

... local sporting goods store, sports facility, or bike shop can help make sure your helmet fits properly. ... sidewalks, children need to learn to watch for cars pulling out from driveways and alleys. Also, teach ...

Investigation of the role of bicyclic peroxy radicals in the oxidation mechanism of toluene.

Science.gov (United States)

Birdsall, Adam W; Andreoni, John F; Elrod, Matthew J

2010-10-07

The products of the primary OH-initiated oxidation of toluene were investigated using the turbulent flow chemical ionization mass spectrometry technique under different oxygen, NO, and initial OH radical concentrations as well as a range of total pressures. The bicyclic peroxy radical intermediate, a key proposed intermediate species in the Master Chemical Mechanism (MCM) for the atmospheric oxidation of toluene, was detected for the first time. The toluene oxidation mechanism was shown to have a strong oxygen concentration dependence, presumably due to the central role of the bicyclic peroxy radical in determining the stable product distribution at atmospheric oxygen concentrations. The results also suggest a potential role for bicyclic peroxy radical + HO(2) reactions at high HO(2)/NO ratios. These reactions are postulated to be a source of the inconsistencies between environmental chamber results and predictions from the MCM.

Plutonium safe handling

International Nuclear Information System (INIS)

Tvehlov, Yu.

2000-01-01

The abstract, prepared on the basis of materials of the IAEA new leadership on the plutonium safe handling and its storage (the publication no. 9 in the Safety Reports Series), aimed at presenting internationally acknowledged criteria on the radiation danger evaluation and summarizing the experience in the safe management of great quantities of plutonium, accumulated in the nuclear states, is presented. The data on the weapon-class and civil plutonium, the degree of its danger, the measures for provision of its safety, including the data on accident radiation consequences with the fission number 10 18 , are presented. The recommendations, making it possible to eliminate the super- criticality danger, as well as ignition and explosion, to maintain the tightness of the facility, aimed at excluding the radioactive contamination and the possibility of internal irradiation, to provide for the plutonium security, physical protection and to reduce irradiation are given [ru

Assessing and Mapping of Road Surface Roughness based on GPS and Accelerometer Sensors on Bicycle-Mounted Smartphones

Science.gov (United States)

Shen, Jie; Wan, Mi; Shi, Jiafeng

2018-01-01

The surface roughness of roads is an essential road characteristic. Due to the employed carrying platforms (which are often cars), existing measuring methods can only be used for motorable roads. Until now, there has been no effective method for measuring the surface roughness of un-motorable roads, such as pedestrian and bicycle lanes. This hinders many applications related to pedestrians, cyclists and wheelchair users. In recognizing these research gaps, this paper proposes a method for measuring the surface roughness of pedestrian and bicycle lanes based on Global Positioning System (GPS) and accelerometer sensors on bicycle-mounted smartphones. We focus on the International Roughness Index (IRI), as it is the most widely used index for measuring road surface roughness. Specifically, we analyzed a computing model of road surface roughness, derived its parameters with GPS and accelerometers on bicycle-mounted smartphones, and proposed an algorithm to recognize potholes/humps on roads. As a proof of concept, we implemented the proposed method in a mobile application. Three experiments were designed to evaluate the proposed method. The results of the experiments show that the IRI values measured by the proposed method were strongly and positively correlated with those measured by professional instruments. Meanwhile, the proposed algorithm was able to recognize the potholes/humps that the bicycle passed. The proposed method is useful for measuring the surface roughness of roads that are not accessible for professional instruments, such as pedestrian and cycle lanes. This work enables us to further study the feasibility of crowdsourcing road surface roughness with bicycle-mounted smartphones. PMID:29562731

Concept of an inherently-safe high temperature gas-cooled reactor

International Nuclear Information System (INIS)

Ohashi, Hirofumi; Sato, Hiroyuki; Tachibana, Yukio; Kunitomi, Kazuhiko; Ogawa, Masuro

2012-01-01

As the challenge to ensure no harmful release of radioactive materials at the accidents by deterministic approach instead to satisfy acceptance criteria or safety goal for risk by probabilistic approach, new concept of advanced reactor, an inherently-safe high temperature gas-cooled reactor, is proposed based on the experience of the operation of the actual High Temperature Gas-cooled Reactor (HTGR) in Japan, High Temperature Engineering Test Reactor (HTTR), and the design of the commercial plant (GTHTR300), utilizing the inherent safety features of the HTGR (i.e., safety features based on physical phenomena). The safety design philosophy of the inherently-safe HTGR for the safety analysis of the radiological consequences is determined as the confinement of radioactive materials is assured by only inherent safety features without engineered safety features, AC power or prompt actions by plant personnel if the design extension conditions occur. Inherent safety features to prevent the loss or degradation of the confinement function are identified. It is proposed not to apply the probabilistic approach for the evaluation of the radiological consequences of the accidents in the safety analysis because no inherent safety features fail for the mitigation of the consequences of the accidents. Consequently, there are no event sequences to harmful release of radioactive materials if the design extension conditions occur in the inherently-safe HTGR concept. The concept and future R and D items for the inherently-safe HTGR are described in this paper.

The Feasibility of Wood and its Derivatives as a Bicycle Frame Building Material

OpenAIRE

BRENT TAYLOR, NICHOLAS

2016-01-01

[EN] ABSTRACT Nicholas Brent Taylor: The Feasibility of Wood and its Derivatives as a Bicycle Frame Building Material The bicycle is often considered as one of the most important inventions of all time. In addition, it is the most efficient form of human transport in the world. It is non pollutant, uses no fuel other than human power and its carbon footprint is neutralised in a short time. Today, faced with the threat of global warming brought about by fossil fuels, countries such as De...

Karate: Keep It Safe.

Science.gov (United States)

Jordan, David

1981-01-01

Safety guidelines for each phase of a karate practice session are presented to provide an accident-free and safe environment for teaching karate in a physical education or traditional karate training program. (JMF)

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements (French Edition); Reglement de transport des matieres radioactives. Edition de 2012

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-03-15

The IAEA's Statute authorizes the Agency to ''establish or adopt standards of safety for protection of health and minimization of danger to life and property'' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the

Implementation of Safe-by-Design for Nanomaterial Development and Safe Innovation: Why We Need a Comprehensive Approach.

Science.gov (United States)

Kraegeloh, Annette; Suarez-Merino, Blanca; Sluijters, Teun; Micheletti, Christian

2018-04-14

Manufactured nanomaterials (MNMs) are regarded as key components of innovations in various fields with high potential impact (e.g., energy generation and storage, electronics, photonics, diagnostics, theranostics, or drug delivery agents). Widespread use of MNMs raises concerns about their safety for humans and the environment, possibly limiting the impact of the nanotechnology-based innovation. The development of safe MNMs and nanoproducts has to result in a safe as well as functional material or product. Its safe use, and disposal at the end of its life cycle must be taken into account too. However, not all MNMs are similarly useful for all applications, some might bear a higher hazard potential than others, and use scenarios could lead to different exposure probabilities. To improve both safety and efficacy of nanotechnology, we think that a new proactive approach is necessary, based on pre-regulatory safety assessment and dialogue between stakeholders. On the basis of the work carried out in different European Union (EU) initiatives, developing and integrating MNMs Safe-by-Design and Trusted Environments (NANoREG, ProSafe, and NanoReg2), we present our point of view here. This concept, when fully developed, will allow for cost effective industrial innovation, and an exchange of key information between regulators and innovators. Regulators are thus informed about incoming innovations in good time, supporting a proactive regulatory action. The final goal is to contribute to the nanotechnology governance, having faster, cheaper, effective, and safer nano-products on the market.

The Politics of Bicycle Innovation: Comparing the American and Dutch Human-Powered Vehicle Movements, 1970s—present

NARCIS (Netherlands)

Stoffers, M.; Oldenziel, R; Trischler, H

2016-01-01

This paper deals with the history of the international Human-Powered Vehicle (HPV) movement, originally launched in the 1970s by engineers and scientists who believed that bicycle innovation could give a major impetus to a coveted western bicycle renaissance. Based on a reading of magazines and

Perceiving and Acting on Complex Affordances: How Children and Adults Bicycle across Two Lanes of Opposing Traffic

Science.gov (United States)

Grechkin, Timofey Y.; Chihak, Benjamin J.; Cremer, James F.; Kearney, Joseph K.; Plumert, Jodie M.

2013-01-01

This investigation examined how children and adults negotiate a challenging perceptual-motor problem with significant real-world implications--bicycling across two lanes of opposing traffic. Twelve- and 14-year-olds and adults rode a bicycling simulator through an immersive virtual environment. Participants crossed intersections with continuous…

Safety training and safe operating procedures written for PBFA (Particle Beam Fusion Accelerator) II and applicable to other pulsed power facilities

Energy Technology Data Exchange (ETDEWEB)

Donovan, G.L.; Goldstein, S.A.

1986-12-01

To ensure that work in advancing pulsed power technology is performed with an acceptably low risk, pulsed power research facilities at Sandia National Laboratories must satisfy general safety guidelines established by the Department of Energy, policies and formats of the Environment, Safety, and Health (ES and H) Department, and detailed procedures formulated by the Pulsed Power Sciences Directorate. The approach to safety training and to writing safe operating procedures, and the procedures presented here are specific to the Particle Beam Fusion Accelerator II (PBFA II) Facility but are applicable as guidelines to other research and development facilities which have similar hazards.

Safety training and safe operating procedures written for PBFA [Particle Beam Fusion Accelerator] II and applicable to other pulsed power facilities

International Nuclear Information System (INIS)

Donovan, G.L.; Goldstein, S.A.

1986-12-01

To ensure that work in advancing pulsed power technology is performed with an acceptably low risk, pulsed power research facilities at Sandia National Laboratories must satisfy general safety guidelines established by the Department of Energy, policies and formats of the Environment, Safety, and Health (ES and H) Department, and detailed procedures formulated by the Pulsed Power Sciences Directorate. The approach to safety training and to writing safe operating procedures, and the procedures presented here are specific to the Particle Beam Fusion Accelerator II (PBFA II) Facility but are applicable as guidelines to other research and development facilities which have similar hazards

Technical highlights of the latest upgrades to Hitachi's G-HIACS νSAFE functional safety controller

International Nuclear Information System (INIS)

Tan, D.; Ishii, K.; Otsuka, Y.; Uemura, K.; Suenaga, M.; Koyamada, T.

2014-01-01

Hitachi has developed the G-HIACS νSAFE (pronounced 'nu-safe'), a Functional Safety (FS) controller compliant to IEC 61508 SIL 2, in part to satisfy the requirements of control systems for Nuclear Steam Plants (NSP). Hitachi has reported some of the main challenges, counter-measures and improvements encountered and designed during the several phases of development of controller system at previous Canadian Nuclear Society (CNS) Annual Conferences. Hitachi received initial Product Version 1 (PV1) certification from TUV Rheinland in 2010. Since then, additional functional and design improvements and changes have made product re-certification necessary, in order to cover the scope of the additional and improved capabilities. This paper describes some of these Product Version 2 (PV2) capabilities (certified by TUV Rheinland in 2013). (author)

Developing Safe Schools Partnerships with Law Enforcement

Science.gov (United States)

Rosiak, John

2009-01-01

Safe schools are the concern of communities throughout the world. If a school is safe, and if children feel safe, students "are better able to learn. But what are the steps to make" this happen? First, it is important to understand the problem: What are the threats to school safety? These include crime-related behaviors that find their way to…

A Methodological Framework for Software Safety in Safety Critical Computer Systems

OpenAIRE

P. V. Srinivas Acharyulu; P. Seetharamaiah

2012-01-01

Software safety must deal with the principles of safety management, safety engineering and software engineering for developing safety-critical computer systems, with the target of making the system safe, risk-free and fail-safe in addition to provide a clarified differentaition for assessing and evaluating the risk, with the principles of software risk management. Problem statement: Prevailing software quality models, standards were not subsisting in adequately addressing the software safety ...

Is nuclear power safe enough

Energy Technology Data Exchange (ETDEWEB)

Andresen, A F [Institutt for Atomenergi, Kjeller (Norway)

1979-01-01

The lecture formed a commentary on the report of the Norwegian Government's Commission on Nuclear power Safety which was published in October 1978. It was introductorily pointed out that 'safe' and 'safety' are not in themselves meaningful terms and that the probability of an occurrence is the real measure. The main items in the Commission's report have been core meltdown, releases during reprocessing, waste disposal, plutonium diversion and environmental impacts. The 21 members of the Commission were unanimous in 7 of the 8 chapters. In chapter 2, 'Summary and Conclusions', 3 members dissented from the majority opinion, that, subject to certain conditions, nuclear power was a safe and acceptable source of energy.

The safe use of radiation sources

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-01

As a means of promoting safety in the use of radiation sources, as well as encouraging consistency in regulatory control, the IAEA has from time to time organized training courses with the co-operation of Member State governments and organizations, to inform individuals from developing countries with appropriate responsibilities on the provisions for the safe use and regulation of radiation sources. Three such courses on the safe use of radiation sources have been held in both the USA, with the co-operation of the United States Government, and in Dublin, Ireland, with the co-operation of the Irish Government. The Training Course on the Safe Use and Regulation of Radiation Sources has been successfully given to over 77 participants from over 30 countries during the last years. The course is aimed at providing a basis of radiation protection knowledge in all aspects of the uses of radiation and of radiation sources that are used today. It is the intention of this course to provide a systematic enhancement of radioisotope safety in countries with developing radiological programmes through a core group of national authorities. The IAEA's training programmes provide an excellent opportunity for direct contact with lecturers that have extensive experience in resolving issues faced by developing countries and in providing guidance documents useful in addressing their problems. This document uses this collective experience and provides valuable technical information regarding the safety aspects of the uses not only of sealed and unsealed sources of radiation, but also for those machines that produce ionizing radiation. The first of these training courses, 'Safety and Regulation of Unsealed Sources' was held in Dublin, Ireland, June through July 1989 with the co-operation of the Nuclear Energy Board and Trinity College. This was an interregional training course, the participants came from all over the world. The second and third interregional courses, 'Safety and Regulation

The safe use of radiation sources

International Nuclear Information System (INIS)

1995-01-01

As a means of promoting safety in the use of radiation sources, as well as encouraging consistency in regulatory control, the IAEA has from time to time organized training courses with the co-operation of Member State governments and organizations, to inform individuals from developing countries with appropriate responsibilities on the provisions for the safe use and regulation of radiation sources. Three such courses on the safe use of radiation sources have been held in both the USA, with the co-operation of the United States Government, and in Dublin, Ireland, with the co-operation of the Irish Government. The Training Course on the Safe Use and Regulation of Radiation Sources has been successfully given to over 77 participants from over 30 countries during the last years. The course is aimed at providing a basis of radiation protection knowledge in all aspects of the uses of radiation and of radiation sources that are used today. It is the intention of this course to provide a systematic enhancement of radioisotope safety in countries with developing radiological programmes through a core group of national authorities. The IAEA's training programmes provide an excellent opportunity for direct contact with lecturers that have extensive experience in resolving issues faced by developing countries and in providing guidance documents useful in addressing their problems. This document uses this collective experience and provides valuable technical information regarding the safety aspects of the uses not only of sealed and unsealed sources of radiation, but also for those machines that produce ionizing radiation. The first of these training courses, 'Safety and Regulation of Unsealed Sources' was held in Dublin, Ireland, June through July 1989 with the co-operation of the Nuclear Energy Board and Trinity College. This was an interregional training course, the participants came from all over the world. The second and third interregional courses, 'Safety and Regulation

Global bike share: What the data tells us about road safety.

Science.gov (United States)

Fishman, Elliot; Schepers, Paul

2016-02-01

Bike share has emerged as a rapidly growing mode of transport in over 800 cities globally, up from just a handful in the 1990s. Some analysts had forecast a rise in the number of bicycle crashes after the introduction of bike share, but empirical research on bike share safety is rare. The goal of this study is to examine the impact of bike share programs on cycling safety. The paper has two substudies. Study 1 was a secondary analysis of longitudinal hospital injury data from the Graves et al. (2014) study. It compared cycling safety in cities that introduced bike share programs with cities that did not. Study 2 combined ridership data with crash data of selected North American and European cities to compare bike share users to other cyclists. Study 1 indicated that the introduction of a bike share system was associated with a reduction in cycling injury risk. Study 2 found that bike share users were less likely than other cyclists to sustain fatal or severe injuries. On a per kilometer basis, bike share is associated with decreased risk of both fatal and non-fatal bicycle crashes when compared to private bike riding. The results of this study suggest that concerns of decreased levels of cycling safety are unjustified and should not prevent decision makers from introducing public bike share schemes, especially if combined with other safety measures like traffic calming. Copyright © 2015 Elsevier Ltd and National Safety Council. All rights reserved.

Efficiency of choice set generation methods for bicycle routes

DEFF Research Database (Denmark)

Halldórsdóttir, Katrín; Rieser-Schussler, Nadine; Axhausen, Kay W.

2014-01-01

for scenic routes, dedicated cycle lanes, and road type. Data consisted of 778 bicycle trips traced by GPS and carried out by 139 persons living in the Greater Copenhagen Area, in Denmark. Results suggest that both the breadth first search on link elimination and the doubly stochastic generation function...

Methodological proposal for the implementation of shared bicycle applied to the Brazilian context

Energy Technology Data Exchange (ETDEWEB)

Espana, J.P.; Barbosa, P.

2016-07-01

The main objective of this study is to analyze the bicycle rental system in the Federal District {sup B}ike Brasilia{sup .} It aims to identify guidelines that supported the application process and consensus, disagreements and guidelines established by the Institute for Policies and Development in Transportation - ITDP and relate those listed by Zhang regarding rented bikes systems. This is an exploratory study based on the strategy of document analysis and its secondary sources: institutional documents, basic design, procurement and other official documents made exclusively for this study. To support the discussion, a systematic literature review of the rules describing specially: sustainability, transport, urban mobility, bicycle rental and environment. The results reveal that while some of the parameters and indicators of efficiency are met on time, the bicycle sharing system of the city of Brasilia, has weaknesses that can lead to inefficiency and impracticality of maintaining and expanding such services. On the other hand, Bike Brasilia partially fulfills the principles enumerated by Zhang and lacks improvement in the steps for the successful operation of the system. (Author)

Peptides derivatized with bicyclic quaternary ammonium ionization tags. Sequencing via tandem mass spectrometry.

Science.gov (United States)

Setner, Bartosz; Rudowska, Magdalena; Klem, Ewelina; Cebrat, Marek; Szewczuk, Zbigniew

2014-10-01

Improving the sensitivity of detection and fragmentation of peptides to provide reliable sequencing of peptides is an important goal of mass spectrometric analysis. Peptides derivatized by bicyclic quaternary ammonium ionization tags: 1-azabicyclo[2.2.2]octane (ABCO) or 1,4-diazabicyclo[2.2.2]octane (DABCO), are characterized by an increased detection sensitivity in electrospray ionization mass spectrometry (ESI-MS) and longer retention times on the reverse-phase (RP) chromatography columns. The improvement of the detection limit was observed even for peptides dissolved in 10 mM NaCl. Collision-induced dissociation tandem mass spectrometry of quaternary ammonium salts derivatives of peptides showed dominant a- and b-type ions, allowing facile sequencing of peptides. The bicyclic ionization tags are stable in collision-induced dissociation experiments, and the resulted fragmentation pattern is not significantly influenced by either acidic or basic amino acid residues in the peptide sequence. Obtained results indicate the general usefulness of the bicyclic quaternary ammonium ionization tags for ESI-MS/MS sequencing of peptides. Copyright © 2014 John Wiley & Sons, Ltd.

The usefulness of GPS bicycle tracking data for evaluating the impact of infrastructure change on cycling behaviour.

Science.gov (United States)

Heesch, Kristiann C; Langdon, Michael

2016-02-01

Issue addressed A key strategy to increase active travel is the construction of bicycle infrastructure. Tools to evaluate this strategy are limited. This study assessed the usefulness of a smartphone GPS tracking system for evaluating the impact of this strategy on cycling behaviour. Methods Cycling usage data were collected from Queenslanders who used a GPS tracking app on their smartphone from 2013-2014. 'Heat' and volume maps of the data were reviewed, and GPS bicycle counts were compared with surveillance data and bicycle counts from automatic traffic-monitoring devices. Results Heat maps broadly indicated that changes in cycling occurred near infrastructure improvements. Volume maps provided changes in counts of cyclists due to these improvements although errors were noted in geographic information system (GIS) geo-coding of some GPS data. Large variations were evident in the number of cyclists using the app in different locations. These variations limited the usefulness of GPS data for assessing differences in cycling across locations. Conclusion Smartphone GPS data are useful in evaluating the impact of improved bicycle infrastructure in one location. Using GPS data to evaluate differential changes in cycling across multiple locations is problematic when there is insufficient traffic-monitoring devices available to triangulate GPS data with bicycle traffic count data. So what? The use of smartphone GPS data with other data sources is recommended for assessing how infrastructure improvements influence cycling behaviour.

Randomized Trials and Self-Reported Accident as a Method to Study Safety-Enhancing Measures for Cyclists - two case studies

DEFF Research Database (Denmark)

Lahrmann, Harry Spaabæk; Madsen, Tanja Kidholm Osmann; Olesen, Anne Vingaard

2016-01-01

In this paper we describe the safety impact of increased visibility of cyclists through two randomised controlled trials: permanent running lights on bicycles and a yellow bike jacket, respectively....

An experiment on rider stability while mounting : comparing middle-aged and elderly cyclists on pedelecs and conventional bicycles.

NARCIS (Netherlands)

Twisk, D.A.M. Platteel, S. & Lovegrove, G.R.

2017-01-01

Pedelecs, popular among elderly cyclists, are associated with a higher injury risk than conventional bicycles. About 17% of these injuries are due to falls while (dis)mounting. Using instrumented bicycles, this study aimed to identify factors contributing to the stability of self-chosen mounting

Approaches to achieving inherently safe fusion power plants

International Nuclear Information System (INIS)

Piet, S.J.

1986-01-01

Achieving inherently safe fusion facilities and conceptual designs is a challenge to the fusion community. Success should provide fusion with important competitive advantages versus other energy technologies. Inherent safety should mean a facility designed with passive safety features such that the public is protected from any acute fatalities under all credible accidental circumstances. A key aspect to inherent safety is demonstrability - the ability to prove that a deign is as safe as claimed. Three complementary approaches to achieving inherent safety are examined: toxin inventory reduction, energy source reduction and design fault tolerance. Four levels of assurance are defined, associated with uncertainty in the words ''credible' and ''demonstrable.'' Sound reasons exist for believing that inherent safety puts a modest upper bound on all accident consequences; it should be considered a part of the collection of safety and environmental issues, which also include lower consequence accidents, waste management, and effluent control

Keeping you safe by making machine tools safe

CERN Multimedia

2012-01-01

CERN’s third safety objective for 2012 concerns the safety of equipment - and machine tools in particular.   There are three prerequisites for ensuring that a machine tool can be used safely: ·      the machine tool must comply with Directive 2009/104/EC, ·      the layout of the workshop must be compliant, and ·      everyone who uses the machine tool must be trained. Provided these conditions are met, the workshop head can grant authorisation to use the machine tool. To fulfil this objective, an inventory of the machine tools must be drawn up and the people responsible for them identified. The HSE Unit's Safety Inspection Service produces compliance reports for the machine tools. In order to meet the third objective set by the Director-General, the section has doubled its capacity to carry out inspections: ...

The PurdueTracer: An Energy-Efficient Human-Powered Hydraulic Bicycle with Flexible Operation and Software Aids

Directory of Open Access Journals (Sweden)

Gianluca Marinaro

2018-01-01

Full Text Available Hydrostatic transmissions (HT are widely applied to heavy-duty mobile applications because of the advantages of layout flexibility, power to weight ratio, and ease of control. Though applications of fluid power in light-duty vehicles face challenges, including the unavailability of off-the-shelf components suitable to the power scale, there are potential advantages for HTs in human-powered vehicles, such as bicycles, the most important one being the energy-saving advantage achievable through regenerative braking in a hybrid HT. This paper describes an innovative design for a hydraulic hybrid bicycle, i.e., the PurdueTracer. The PurdueTracer is an energy-efficient human-powered hydraulic bicycle with flexible operation and software aids. An open-circuit hydraulic hybrid transmission allows PurdueTracer to operate in four modes: Pedaling, Charging, Boost, and Regeneration, to satisfy users’ need for different riding occasions. An aluminum chassis that also functions as a system reservoir was customized for the PurdueTracer to optimize the durability, riding comfort, and space for components. The selection of the hydraulic components was performed by creating a model of the bicycle in AMESim simulation software and conducting a numerical optimization based on the model. The electronic system equipped users with informative feedback showing the bicycle performance, intuitive execution of functions, and comprehensive guidance for operation. This paper describes the design approach and the main results of the PurdueTracer, which also won the 2017 National Fluid Power Association Fluid Power Vehicle Challenge. This championship serves to prove the excellence of this vehicle in terms of effectiveness, efficiency, durability, and novelty.

Social Influence and Safe Behavior in Manufacturing

DEFF Research Database (Denmark)

Hald, Kim Sundtoft

2018-01-01

This research presents a model designed to explore the cognitive and social mechanisms that mediate the relationship between organizational safety climate and safety behaviors. Specifically the presented research demonstrates the usefulness of Sussmann and Vecchio (1982) social influence interpre......This research presents a model designed to explore the cognitive and social mechanisms that mediate the relationship between organizational safety climate and safety behaviors. Specifically the presented research demonstrates the usefulness of Sussmann and Vecchio (1982) social influence...... interpretation of worker motivation to understand safety motivation. Survey data was collected from 428 employees in seven factories within the electronics industry in China. The data were analyzed using structural modelling. The results suggest that factory workers with more knowledge about the products...... that the total effects of a factory workers experience with safety and health problems seems to affect safe work behavior negatively, and that this is caused by a decrease in confidence and abilities to work safely. In relation to practical implications the present study demonstrate how manufacturing managers...

Synthesis and anticonvulsant activity of novel bicyclic acidic amino acids

DEFF Research Database (Denmark)

Conti, Paola; De Amici, Marco; Joppolo Di Ventimiglia, Samuele

2003-01-01

Bicyclic acidic amino acids (+/-)-6 and (+/-)-7, which are conformationally constrained homologues of glutamic acid, were prepared via a strategy based on a 1,3-dipolar cycloaddition. The new amino acids were tested toward ionotropic and metabotropic glutamate receptor subtypes; both of them...

An Automated Safe-to-Mate (ASTM) Tester

Science.gov (United States)

Nguyen, Phuc; Scott, Michelle; Leung, Alan; Lin, Michael; Johnson, Thomas

2013-01-01

Safe-to-mate testing is a common hardware safety practice where impedance measurements are made on unpowered hardware to verify isolation, continuity, or impedance between pins of an interface connector. A computer-based instrumentation solution has been developed to resolve issues. The ASTM is connected to the circuit under test, and can then quickly, safely, and reliably safe-to-mate the entire connector, or even multiple connectors, at the same time.

Safety of intrinsically safe and economical reactor (ISER)

International Nuclear Information System (INIS)

Asahi, Y.; Sugawara, I.; Yamanaka, K.

1988-01-01

Inherent safety of a reactor may be quantified by the grace period at various safety levels such as maintenance of fuel integrity, maintenance of fuel coolability and avoidance of core-melt. It is important to find out the grace period especially at the safety level of maintenance of fuel integrity. It has been conducted to design the ISER, which is characterized by the steel-made reactor pressure vessel. In addition to the passive nature of the safety design of the reactor itself, the ISER is equipped in the secondary system with a subsystem called the passive safety and shutdown system (PSSS), which will help to increase the grace period. It was found by the null transient analysis that check valves are needed at the top hot/cold interface. The analysis of the station blackout, which is one of the severest accident conceivable for the ISER, was made to examine inherent safety of the ISER with and without the PSSS. This paper reports that found out that the PSSS enhances inherent safety of the ISER

Deep geological repositories. Safe operation and long-term safety in the prism of reversibility

Energy Technology Data Exchange (ETDEWEB)

Espivent, Camille; Tichauer, Michael [IRSN, Fontenay-aux-Roses (France)

2015-07-01

A deep geological repository is the reference solution enshrined in the French law for the long-term management of high-level radioactive waste. The current project is led by Andra, the French radioactive waste management organization. As a technical support organization, IRSN's mission is, on the basis of the safety case produced by Andra, to assess the safety of such a facility at its various stages of development, that is to say the design, construction, operation and post-closure phases of the facility. Such a facility will have to meet specific requirements, within different time frames as stated above. One of the requirements is ''reversibility'': in fact, French law poses that the geological disposal will have to be ''reversible'' for a certain time, yet not fully defined. Reversibility is nevertheless believed encompassing both the decision making process related to the waste emplacement process during operational phase and the ability to retrieve waste, should such a decision be made. Thus, underground structures have to be designed and operated to allow both waste emplacement and removal. Moreover, future decision making about the disposal process will have to rely on a sound technical basis. This implies a data collection scheme and a monitoring program of the facility to check if the disposal process is bound by limits, controls and conditions compatible with (i) a safe operation of the facility and (ii) the state of the facility that the operator wants to achieve at the time of its closure, so that long-term safety is guaranteed. Therefore, technical criteria and key parameters have to be selected and monitored during construction and operation, that is to say for decades. Then, reversibility have to make room for corrective actions, including the retrieval of waste, if something goes wrong and especially if the facility is not seen as safe anymore, especially in the perspective of long-term safety. To

Deep geological repositories. Safe operation and long-term safety in the prism of reversibility

International Nuclear Information System (INIS)

Espivent, Camille; Tichauer, Michael

2015-01-01

A deep geological repository is the reference solution enshrined in the French law for the long-term management of high-level radioactive waste. The current project is led by Andra, the French radioactive waste management organization. As a technical support organization, IRSN's mission is, on the basis of the safety case produced by Andra, to assess the safety of such a facility at its various stages of development, that is to say the design, construction, operation and post-closure phases of the facility. Such a facility will have to meet specific requirements, within different time frames as stated above. One of the requirements is ''reversibility'': in fact, French law poses that the geological disposal will have to be ''reversible'' for a certain time, yet not fully defined. Reversibility is nevertheless believed encompassing both the decision making process related to the waste emplacement process during operational phase and the ability to retrieve waste, should such a decision be made. Thus, underground structures have to be designed and operated to allow both waste emplacement and removal. Moreover, future decision making about the disposal process will have to rely on a sound technical basis. This implies a data collection scheme and a monitoring program of the facility to check if the disposal process is bound by limits, controls and conditions compatible with (i) a safe operation of the facility and (ii) the state of the facility that the operator wants to achieve at the time of its closure, so that long-term safety is guaranteed. Therefore, technical criteria and key parameters have to be selected and monitored during construction and operation, that is to say for decades. Then, reversibility have to make room for corrective actions, including the retrieval of waste, if something goes wrong and especially if the facility is not seen as safe anymore, especially in the perspective of long-term safety. To

Usage Patterns of Electric Bicycles: An Analysis of the WeBike Project

Directory of Open Access Journals (Sweden)

Christian Gorenflo

2017-01-01

Full Text Available This paper presents an analysis of data collected through the Waterloo WeBike project: a field trial in which over 30 sensor-equipped electric bicycles (e-bikes were given to members of the University of Waterloo for personal use. Our dataset includes e-bike trips and battery charging sessions spanning nearly three years, from summer 2014 until spring 2017. We also conducted three surveys both before and during the trial. Our main findings were that the primary purpose of the e-bikes in our trial was for commuting, with most trips lasting less than 20 minutes and most trips taking place in the summer months. Our battery charging analysis revealed no evidence of range anxiety, and our analysis of survey results showed little correlation between anticipated and actual use. Furthermore, when asked about their opinions about various modes of transportation, our participants rated regular bicycles higher than e-bikes even after becoming familiar with e-bikes through the field trial. Based on our analysis, we draw several conclusions, including the fact that the general population in Canada is still unaware of e-bikes and their potential. Moreover, e-bike manufacturers should target sales to nonbike users, such as seniors, rather than trying to displace sales of regular bicycles.

How did aviation become so safe, and beyond?

NARCIS (Netherlands)

Stoop, J.A.A.M.

2017-01-01

Aviation has been recognized as one of the ultimate safe socio-technical systems. This contribution discusses the conditions and context that moulded the system safety to its present level by applying integral safety, a sectoral approach and safety as a strategic value. At present the aviation

Global bike share: What the data tells us about road safety

NARCIS (Netherlands)

Fishman, E.; Schepers, J.P.

Introduction Bike share has emerged as a rapidly growing mode of transport in over 800 cities globally, up from just a handful in the 1990s. Some analysts had forecast a rise in the number of bicycle crashes after the introduction of bike share, but empirical research on bike share safety is rare.

Municipal investment in off-road trails and changes in bicycle commuting in Minneapolis, Minnesota over 10 years: a longitudinal repeated cross-sectional study.

Science.gov (United States)

Hirsch, Jana A; Meyer, Katie A; Peterson, Marc; Zhang, Le; Rodriguez, Daniel A; Gordon-Larsen, Penny

2017-02-13

We studied the effect of key development and expansion of an off-road multipurpose trail system in Minneapolis, Minnesota between 2000 and 2007 to understand whether infrastructure investments are associated with increases in commuting by bicycle. We used repeated measures regression on tract-level (N = 116 tracts) data to examine changes in bicycle commuting between 2000 and 2008-2012. We investigated: 1) trail proximity measured as distance from the trail system and 2) trail potential use measured as the proportion of commuting trips to destinations that might traverse the trail system. All analyses (performed 2015-2016) adjusted for tract-level sociodemographic covariates and contemporaneous cycling infrastructure changes (e.g., bicycle lanes). Tracts that were both closer to the new trail system and had a higher proportion of trips to destinations across the trail system experienced greater 10-year increases in commuting by bicycle. Proximity to off-road infrastructure and travel patterns are relevant to increased bicycle commuting, an important contributor to overall physical activity. Municipal investment in bicycle facilities, especially off-road trails that connect a city's population and its employment centers, is likely to lead to increases in commuting by bicycle.

Study of industry safety management

International Nuclear Information System (INIS)

Park, Pil Su

1987-06-01

This book deals with general remarks, industrial accidents, statistics of industrial accidents, unsafe actions, making machinery and facilities safe, safe activities, having working environment safe, survey of industrial accidents and analysis of causes, system of safety management and operations, safety management planning, safety education, human engineering such as human-machines system, system safety, and costs of disaster losses. It lastly adds individual protective equipment and working clothes including protect equipment for eyes, face, hands, arms and feet.

The effect of a yellow bicycle jacket on cyclist accidents

DEFF Research Database (Denmark)

Lahrmann, Harry; Madsen, Tanja Kidholm Osmann; Olesen, Anne Vingaard

2018-01-01

Highlights •A randomised controlled trial with 6793 cyclists shows a reduced accident risk due to a yellow bicycle jacket. •The test group had 47% fewer multiparty accidents with personal injury. •The test group had 55% fewer multiparty accidents against motorised vehicles....

Inherently safe light water reactors

International Nuclear Information System (INIS)

Ise, Takeharu

1987-01-01

Today's large nuclear power reactors of world-wise use have been designed based on the philosophy. It seems that recent less electricity demand rates, higher capital cost and the TMI accident let us acknowledge relative small and simplified nuclear plants with safer features, and that Chernobyl accident in 1983 underlines the needs of intrinsic and passive safety characteristics. In such background, several inherently safe reactor concepts have been presented abroad and domestically. First describing 'Can inherently safe reactors be designed,' then I introduce representative reactor concepts of inherently safe LWRs advocated abroad so far. All of these innovative reactors employ intrinsic and passive features in their design, as follows: (1) PIUS, an acronym for Process Inherent Ultimate Safety, or an integral PWR with passive heat sink and passive shutdown mechanism, advocated by ASEA-ATOM of Sweden. (2) MAP(Minimum Attention Plant), or a self-pressurized, natural circulation integral PWR, promoted by CE Inc. of the U.S. (3) TPS(TRIGA Power System), or a compact PWR with passive heat sink and inherent fuel characteristics of large prompt temperature coefficient, prompted by GA Technologies Inc. of the U.S. (4) PIUS-BWR, or an inherently safe BWR employing passively actuated fluid valves, in competition with PIUS, prompted by ORNL of the U.S. Then, I will describe the domestic trends in Japan and the innovative inherently safe LWRs presented domestically so far. (author)

Bike to work safely (follow-up)

CERN Document Server

Simon Baird, HSE Unit Head

2016-01-01

Following a recent article about safe cycling (see here), the Bulletin received a request for more details on the type of accidents that are reported.   An analysis of the 38 accidents involving bicycles reported this year up to the end of August reveals that the most common single cause of accidents is slippery surfaces: ice, snow, water and gravel, so the message here is to take extra care, particularly when cycling in bad weather. The second item on the list is obstacles of various kinds: collisions with kerbs, potholes and even the transition from roads to cycle paths. The lesson here is to pay close attention to the surface you’re cycling over, and if you do spot a pothole, even if it does not lead to an accident, report it so that it can be repaired. It’s also worth remembering that you’re more likely to avoid coming off your bike if you keep your hands on the handlebars. The third highest cause is collisions with other vehicles, and here there are lessons for ...

Hydrolysis of strained bridgehead bicyclic vinyl ethers and sulfides

International Nuclear Information System (INIS)

Chwang, W.K.; Kresge, A.J.; Wiseman, J.R.

1979-01-01

Rates of hydrolysis of the bridgehead bicyclic vinyl ether 9-oxabicyclo[3.3.1]non-1-ene(6) and its vinyl sulfide counterpart 9-thiabicyclo[3.3.1]non-1-ene(7), catalyzed by the hydronium ion, were measured in H 2 O and in D 2 O solution. These data give isotope effects, k/sub H//k/sub D/ = 2.4 and 1.9 respectively, which show that these reactions occur by the normal, rate-determining carbon protonation, mechanism. The vinyl ether 6 is less reactive than its olefin analogue, bicyclo[3.3.1]non-1-ene (relative rate 1:1/1400), as may have been expected for a constrained bicyclic system such as this, where stabilization of the bridgehead carbocation intermediate by conjugation with oxygen is severely impaired. The vinyl sulfide 7, however, is even less reactive than the vinyl ether (relative rates 1:1/140); this is a remarkable result in view of the fact that conjugation between the sulfur atom and the cationic center is presumably also strongly inhibited. 1 figure, 3 tables

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements. (Russian Edition); Pravila bezopasnoj perevozki radioaktivnykh materialov. Izdanie 2012 goda. Konkretnye trebovaniya bezopasnosti

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-03-15

The IAEA's Statute authorizes the Agency to 'establish or adopt' standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

Business Process Reengineering within the bicycle industry

OpenAIRE

Bartolomé Rodriguez, David

2010-01-01

Bicycle leader brands have shift production overseas to reduce the cost of labor and to implement new technologies at lower cost. Bike manufacturer both in Asia and Europe employ a traditional way of production  based on economics of scale that aims cost per unit reduction. Where MRP systems and forecasting are part of their day basis operations. This traditional way of operation offers room for innovation that must be seen as a business opportunity. Thus, alternative management approaches ca...

Action of bicyclic isoxazole GABA analogues on GABA transporters and its relation to anticonvulsant activity

DEFF Research Database (Denmark)

Bolvig, T; Larsson, O M; Pickering, D S

1999-01-01

The inhibitory action of bicyclic isoxazole gamma-aminobutyric acid (GABA) analogues and their 4,4-diphenyl-3-butenyl (DPB) substituted derivatives has been investigated in cortical neurones and astrocytes as well as in human embryonic kidney (HEK 293) cells transiently expressing either mouse GA...... anticonvulsant activity, lack of proconvulsant activity and the ability of THPO to increase extracellular GABA concentration, indicate that these bicyclic isoxazole GABA analogues and their DPB derivatives may be useful lead structures in future search for new antiepileptic drugs....

The effects of operating a touch screen smartphone and other common activities performed while bicycling on cycling behaviour

NARCIS (Netherlands)

de Waard, Dick; Lewis Evans, Ben; Jelijs, Bart; Tucha, Oliver; Brookhuis, Karel

Although it has been shown that making phone calls or sending text messages while riding a bicycle can have a negative impact on bicyclist’s behaviour, in countries such as the Netherlands the operation of a mobile phone while cycling on a bicycle is not illegal and is actually quite common. In

Generation of Polar Semi-Saturated Bicyclic Pyrazoles for Fragment-Based Drug Discovery Campaigns.

Science.gov (United States)

Luise, Nicola; Wyatt, Paul

2018-05-07

Synthesising polar semi-saturated bicyclic heterocycles can lead to better starting points for fragment-based drug discovery (FBDD) programs. This communication highlights the application of diverse chemistry to construct bicyclic systems from a common intermediate, where pyrazole, a privileged heteroaromatic able to bind effectively to biological targets, is fused to diverse saturated counterparts. The generated fragments can be further developed either after confirmation of their binding pose or early in the process, as their synthetic intermediates. Essential quality control (QC) for selection of small molecules to add to a fragment library is discussed. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Walking, bicycling, and sports in postmenopausal breast cancer survivors--results from a German patient cohort study.

Science.gov (United States)

Bock, Christina; Schmidt, Martina E; Vrieling, Alina; Chang-Claude, Jenny; Steindorf, Karen

2013-06-01

Physical activity (PA) is increasingly discussed as a means to achieve both physical and psychological benefits for breast cancer patients and survivors. However, little is known about activity-specific PA behavior following diagnosis. Our objectives were to describe sports and active transportation in the course of breast cancer and to identify factors associated with these activities. We used data from a German cohort study including 1067 postmenopausal breast cancer survivors aged 50-75 years. Data were collected about walking and bicycling for transportation purposes and sports before diagnosis, during therapy, and 1 year after surgery. Associations between these activities and clinical, behavioral, and social characteristics were analyzed with logistic regression. The proportions of physically active women decreased significantly during therapy compared with before diagnosis (walking: 75.1% vs. 89.7%; bicycling: 19.3% vs. 56.5%; sports: 14.8% vs. 64.5%; all p sport. Chemotherapy/radiotherapy was negatively associated with sports (odds ratio [OR]: 0.35 [0.17-0.73]) but positively associated with walking during therapy (OR: 2.08 [1.04-4.15]). Although sociodemographic factors showed weak associations with PA, participation in rehabilitation increased the likelihood for bicycling (OR: 1.48 [1.06-2.09]) and sports (OR: 1.88 [1.38-2.58]) 1 year after surgery. The majority of women stopped exercising and bicycling during breast cancer therapy. Interventions promoting in particular moderate activities after breast cancer diagnosis are required for this population. Increasing participation in rehabilitation might help to increase the proportion of women who bicycle and engage in sports after breast cancer diagnosis. Copyright © 2012 John Wiley & Sons, Ltd.

Nonfatal bicycle accident risk after an evening of alcohol consumption

NARCIS (Netherlands)

Verster, J.C.; van Herwijnen, J.; Volkerts, E.R.; Olivier, B.

2009-01-01

Introduction: After an evening of alcohol consumption, blood alcohol concentration (BAC) may reach intoxication levels above legal limits for operating a car or bicycle. In the Netherlands, legal limits for participating in traffic are 0.05% for experienced drivers and 0.02% for novice drivers. The

Final Hazard Classification and Auditable Safety Analysis for the 105-F Building Interim Safe Storage Project

International Nuclear Information System (INIS)

Rodovsky, T.J.; Bond, S.L.

1998-07-01

The auditable safety analysis (ASA) documents the authorization basis for the partial decommissioning and facility modifications to place the 105-F Building into interim safe storage (ISS). Placement into the ISS is consistent with the preferred alternative identified in the Record of Decision (58 FR). Modifications will reduce the potential for release and worker exposure to hazardous and radioactive materials, as well as lower surveillance and maintenance (S ampersand M) costs. This analysis includes the following: A description of the activities to be performed in the course of the 105-F Building ISS Project. An assessment of the inventory of radioactive and other hazardous materials within the 105-F Building. Identification of the hazards associated with the activities of the 105-F Building ISS Project. Identification of internally and externally initiated accident scenarios with the potential to produce significant local or offsite consequences during the 105-F Building ISS Project. Bounding evaluation of the consequences of the potentially significant accident scenarios. Hazard classification based on the bounding consequence evaluation. Associated safety function and controls, including commitments. Radiological and other employee safety and health considerations

Association between neighborhood walkability and GPS-measured walking, bicycling and vehicle time in adolescents.

Science.gov (United States)

Carlson, Jordan A; Saelens, Brian E; Kerr, Jacqueline; Schipperijn, Jasper; Conway, Terry L; Frank, Lawrence D; Chapman, Jim E; Glanz, Karen; Cain, Kelli L; Sallis, James F

2015-03-01

To investigate relations of walking, bicycling and vehicle time to neighborhood walkability and total physical activity in youth. Participants (N=690) were from 380 census block groups of high/low walkability and income in two US regions. Home neighborhood residential density, intersection density, retail density, entertainment density and walkability were derived using GIS. Minutes/day of walking, bicycling and vehicle time were derived from processing algorithms applied to GPS. Accelerometers estimated total daily moderate-to-vigorous physical activity (MVPA). Models were adjusted for nesting of days (N=2987) within participants within block groups. Walking occurred on 33%, active travel on 43%, and vehicle time on 91% of the days observed. Intersection density and neighborhood walkability were positively related to walking and bicycling and negatively related to vehicle time. Residential density was positively related to walking. Increasing walking in youth could be effective in increasing total physical activity. Built environment findings suggest potential for increasing walking in youth through improving neighborhood walkability. Copyright © 2014 Elsevier Ltd. All rights reserved.

[Abortion using a bicycle pump on the mistress and unusual suicide of a blind man].

Science.gov (United States)

Holzer, F J

1973-01-01

In Tyrol a case of fatal air embolism after an abortion attempt with a bicycle pump, performed by a blind man who later committed suicide, is described. The bicycle tube was inserted into the vagina and air and a soapy solution were pumped in. Autopsies revealed internal bleeding, gas embolisms in the veins of the ovaries and heart, a bloody foamy liquid in the lungs, and an intact 14 cm male fetus. 3 similar cases of fatal air embolisms after abortion attempts with bicycle pumps are described. In 1 case a soapy solution had been injected. Abortion attempts with a pipe and a rubber catheter, reported here, also resulted in rapidly fatal air embolisms. In 1 case death occurred a few seconds after a partner blew air with his mouth into his pregnant mistress' vagina. It is concluded that under some conditions filling the vagina with air (tightly) can cause fatal air embolisms.

Schedules of Provisions of the IAEA Regulations for the Safe Transport of Radioactive Material (2009 Ed.). Safety Guide

International Nuclear Information System (INIS)

2014-01-01

This Safety Guide is issued in support of Regulations for the Safe Transport of Radioactive Material (IAEA Safety Standards Series No. TS-R-1, 2009 Edition). It lists the paragraph numbers of the Transport Regulations that are relevant for specified types of consignment, classified according to their UN numbers. It does not provide additional recommendations. The intended users are consignors and consignees, carriers, shippers, regulators, and end users involved in the transport of radioactive material. A person or organization intending to transport a particular type of consignment of radioactive material must meet requirements in all sections of the Transport Regulations. This Safety Guide aids users by providing a listing of the relevant requirements of the Transport Regulations for each type of radioactive material, package or shipment. Once a consignor has classified the radioactive material to be shipped, the appropriate UN number can be assigned and the paragraph numbers of the requirements that apply for the shipment can be found in the corresponding schedule

Improving Energy Efficiency of an Autonomous Bicycle with Adaptive Controller Design

Directory of Open Access Journals (Sweden)

David Rodriguez-Rosa

2017-05-01

Full Text Available A method is proposed to achieve lateral stability of an autonomous bicycle with only the rotation of the front wheel. This can be achieved with a classic controller. However, if the energy consumption of the bicycle also has to be minimized, this solution is not valid. To solve this problem, an adaptive controller has been designed, which modifies its gains according to the bicycle’s forward velocity, adapting its response with minimum energy consumption and satisfying the design specifications. The study demonstrates the efficiency of the proposed control, achieving an energy saving of 73 . 8 % in trajectory tracking with respect to a conventional proportional-integral ( P I controller. These results show the importance of designing energy-efficient controllers, not only for autonomous vehicles but also for any automatic system where the energy consumption can be minimized.

Auto Safety

Science.gov (United States)

... Safe Videos for Educators Search English Español Auto Safety KidsHealth / For Parents / Auto Safety What's in this ... by teaching some basic rules. Importance of Child Safety Seats Using a child safety seat (car seat) ...

Associations Between Bicycling and Fall Related Physical Performance in Older Adults

NARCIS (Netherlands)

Pijnappels, M.A.G.M.

2017-01-01

Falls among older adults remains a significant public health issue. Bicycling positively influences falls risk factors including reduced balance, muscle weakness, and low self-perceived confidence in maintaining balance. However, this association has not been systematically examined. We recruited

Will a bicycle friendly policy make passenger travel more sustainably?

DEFF Research Database (Denmark)

Christensen, Linda; Jensen, Thomas Christian

and bicycling. The study shows that instruments that improve the cyclists’ speed and increase the car drivers’ time consumption and costs will influence the competition conditions significantly. The total transfer potential will be between 12 and 16 % of the car trips in case of short tours, equivalent to 1...

Progress in high energy physics and nuclear safety : Proceedings of the NATO Advanced Research Workshop on Safe Nuclear Energy

CERN Document Server

Polański, Aleksander; Begun, Viktor

2009-01-01

The book contains recent results on the progress in high-energy physics, accelerator, detection and nuclear technologies, as well as nuclear safety in high-energy experimentation and in nuclear industry, covered by leading experts in the field. The forthcoming experiments at the Large Hadron Collider (LHC) at CERN and cosmic-ray experiments are highlighted. Most of the current high-energy experiments and their physical motivation are analyzed. Various nuclear energy safety aspects, including progress in the production of new radiation-resistant materials, new and safe nuclear reactor designs, such as the slowly-burning reactor, as well as the use of coal-nuclear symbiotic methods of energy production can be found in the book.

'Cycle thieves, we are watching you': impact of a simple signage intervention against bicycle theft.

Science.gov (United States)

Nettle, Daniel; Nott, Kenneth; Bateson, Melissa

2012-01-01

Bicycle theft is a serious problem in many countries, and there is a lack of evidence concerning effective prevention strategies. Displaying images of 'watching eyes' has been shown to make people behave in more socially desirable ways in a number of settings, but it is not yet clear if this effect can be exploited for purposes of crime prevention. We report the results of a simple intervention on a university campus where signs featuring watching eyes and a related verbal message were displayed above bicycle racks. We installed durable signs at three locations which had experienced high levels of bicycle theft, and used the rest of the university campus as a control location. Reported thefts were monitored for 12 months before and after the intervention. Bicycle thefts decreased by 62% at the experimental locations, but increased by 65% in the control locations, suggesting that the signs were effective, but displaced offending to locations with no signs. The Odds Ratio for the effect of the intervention was 4.28 (95% confidence interval 2.04-8.98), a large effect compared to other place-based crime prevention interventions. The effectiveness of this extremely cheap and simple intervention suggests that there can be considerable crime-reduction benefits to engaging the psychology of surveillance, even in the absence of surveillance itself. Simple interventions for high-crime locations based on this principle should be considered as an adjunct to other measures, although a possible negative consequence is displacement of offending.

The safe management of sources of radiation: Principles and strategies. INSAG-11. A report by the International Nuclear Safety Advisory Group

International Nuclear Information System (INIS)

1999-01-01

The IAEA activities relating to nuclear safety are based upon a number of premises. First and foremost, each Member State bears full responsibility for the safety of its nuclear facilities. States can be advised, but cannot be relieved of this responsibility. Secondly, much can be gained by exchanging experience; lessons learned can prevent accidents. Finally, the image of nuclear safety is international; a serious accident anywhere affects the public view of nuclear power everywhere. With the intention of strengthening its contribution to ensuring safety of nuclear power plants, the IAEA established the International Safety Advisory Group (INSAG), whose duties include serving as a forum for the exchange of information on nuclear safety issues of international significance and formulating commonly shared safety principles. The present report deals with the general principles governing the safety of all sources of radiation and with application of these principles. It intends to show that, at the conceptual level, the distinction traditionally made between nuclear safety and radiation protection is hardly justifiable. It is intended primarily for those non-specialists who need to take decisions about safe management of sources of radiation and who wish to gain a better understanding of the approach followed in managing the safety of these sources

USING THE SAFE SYSTEM APPROACH TO KEEP OLDER DRIVERS SAFELY MOBILE

Directory of Open Access Journals (Sweden)

Jim LANGFORD

2006-01-01

Full Text Available In 2003, Australian road transport jurisdictions collectively accepted that the greatest road safety gains would be achieved through adopting a Safe System approach, derived from Sweden's Vision Zero and the Netherlands' Sustainable Safety strategies. A key objective of all three approaches is to manage vehicles, the road infrastructure, speeds, road users and the interactions between these components, to ensure that in the event of crashes, crash energies will remain at levels that minimize the probability of death and serious injury. Older drivers pose a particular challenge to the Safe System approach, given particularly their greater physical frailty, their driving patterns and for some at least, their reduced fitness to drive. This paper has analyzed the so-called ‘older driver problem’ and identified a number of key factors underpinning their crash levels, for which countermeasures can be identified and implemented within a Safe System framework. The recommended countermeasures consist of: (1 safer roads, through a series of design improvements particularly governing urban intersections; (2 safer vehicles, through both the promotion of crashworthiness as a critical consideration when purchasing a vehicle and the wide use of developed and developing ITS technologies; (3 safer speeds especially at intersections; and (4 safer road users, through both improved assessment procedures to identify the minority of older drivers with reduced fitness to drive and educational efforts to encourage safer driving habits particularly but not only through self-regulation.

Effective and Safe Ships

DEFF Research Database (Denmark)

Pedersen, Preben Terndrup; Amdahl, Jørgen; Rutgersson, Olle

1996-01-01

A Joint Nordic Research project "Effecive and Safe Ships" is presented. The project is aiming to develop methods and tools for quantitative evaluation fo ship safety. This report is the report of the preliminary phase where the plan for the main project is developed. The objectives of the project...

Optimal Test Characteristics for Maximal Anaerobic Work on the Bicycle Ergometer

Science.gov (United States)

Katch, Victor; And Others

1977-01-01

Data from two separate experiments conducted to ascertain the optimum protocol for a maximum anaerobic work output test on the bicycle ergometer indicated that the test duration needs to be approximately forty seconds and the optimal frictional resistance five to six kilograms. (MB)

The Conceptual Design of Innovative Safe PWR

Energy Technology Data Exchange (ETDEWEB)

Kim, Han-Gon [Centural Research Institute, Daejeon (Korea, Republic of); Heo, Sun [Korea Hydro and Nuclear Power Co., Daejeon (Korea, Republic of)

2016-10-15

Most of countries operating NPPs have been performed post-Fukushima improvements as short-term countermeasure to enhance the safety of operating NPPs. Separately, vendors have made efforts on developing passive safety systems as long-term and ultimate countermeasures. AP1000 designed by Westinghouse Electric Company has passive safety systems including the passive emergency core cooling system (PECCS), the passive residual heat removal system (PRHRS), and the passive containment cooling system (PCCS). ESBWR designed by GE-Hitachi also has passive safety systems consisting of the isolation condenser system, the gravity driven cooling system and the PCCS. Other countries including China and Russia have made efforts on developing passive safety systems for enhancing the safety of their plants. In this paper, we summarize the design goals and main design feature of innovative safe PWR, iPOWER which is standing for Innovative Passive Optimized World-wide Economical Reactor, and show the developing status and results of research projects. To mitigate an accident without electric power and enhance the safety level of PWR, the conceptual designs of passive safety system and innovative safe PWR have been performed. It includes the PECCS for core cooling and the PCCS for containment cooling. Now we are performing the small scale and separate effect tests for the PECCS and the PCCS and preparing the integral effect test for the PECCS and real scale test for the PCCS.

Physiological responses and exercise preference between the Trikke and the bicycle ergometer

Directory of Open Access Journals (Sweden)

Eddie T.C. Lam

2016-06-01

Conclusion: Participants were more efficient in using the Trikke than the bicycle ergometer. The Trikke may be an enjoyable alternative for those individuals, particularly women, who have lost interest in traditional forms of exercise.

Safety guide of safe use of industrial radiography

International Nuclear Information System (INIS)

1994-01-01

The objective of this guidance is to present general regulations for the safe use and radiation protection of industrial radiography. Storage and inspection of apparatus, personal instructions for working in radiography facilities are offered

EUROSAFE forum 2013. Safe disposal of nuclear waste

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-07-01

The proceedings of the EUROSAFE forum 2013 - safe disposal of nuclear waste include contributions to the following topics: Nuclear installation safety - assessment; nuclear installation safety - research; waste and decommissioning - dismantling; radiation protection, 3nvironment and emergency preparedness; security of nuclear installations and materials.

Prospects for inherently safe reactors

International Nuclear Information System (INIS)

Barkenbus, J.N.

1988-01-01

Public fears over nuclear safety have led some within the nuclear community to investigate the possibility of producing inherently safe nuclear reactors; that is, reactors that are transparently incapable of producing a core melt. While several promising designs of such reactors have been produced, support for large-scale research and development efforts has not been forthcoming. The prospects for commercialization of inherently safe reactors, therefore, are problematic; possible events such as further nuclear reactor accidents and superpower summits, could alter the present situation significantly. (author)

Safety assessment and verification for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2004-01-01

This Safety Guide was prepared under the IAEA programme for safety standards for nuclear power plants. The present publication is a revision of the IAEA Safety Guide on Management of Nuclear Power Plants for Safe Operation issued in 1984. It supplements Section 2 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation. Nuclear power technology is different from the customary technology of power generation from fossil fuel and by hydroelectric means. One major difference between the management of nuclear power plants and that of conventional generating plants is the emphasis that should be placed on nuclear safety, quality assurance, the management of radioactive waste and radiological protection, and the accompanying national regulatory requirements. This Safety Guide highlights the important elements of effective management in relation to these aspects of safety. The attention to be paid to safety requires that the management recognize that personnel involved in the nuclear power programme should understand, respond effectively to, and continuously search for ways to enhance safety in the light of any additional requirements socially and legally demanded of nuclear energy. This will help to ensure that safety policies that result in the safe operation of nuclear power plants are implemented and that margins of safety are always maintained. The structure of the organization, management standards and administrative controls should be such that there is a high degree of assurance that safety policies and decisions are implemented, safety is continuously enhanced and a strong safety culture is promoted and supported. The objective of this publication is to guide Member States in setting up an operating organization which facilitates the safe operation of nuclear power plants to a high level internationally. The second objective is to provide guidance on the most important organizational elements in order to contribute to a strong safety

Safety assessment and verification for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2005-01-01

This Safety Guide was prepared under the IAEA programme for safety standards for nuclear power plants. The present publication is a revision of the IAEA Safety Guide on Management of Nuclear Power Plants for Safe Operation issued in 1984. It supplements Section 2 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation. Nuclear power technology is different from the customary technology of power generation from fossil fuel and by hydroelectric means. One major difference between the management of nuclear power plants and that of conventional generating plants is the emphasis that should be placed on nuclear safety, quality assurance, the management of radioactive waste and radiological protection, and the accompanying national regulatory requirements. This Safety Guide highlights the important elements of effective management in relation to these aspects of safety. The attention to be paid to safety requires that the management recognize that personnel involved in the nuclear power programme should understand, respond effectively to, and continuously search for ways to enhance safety in the light of any additional requirements socially and legally demanded of nuclear energy. This will help to ensure that safety policies that result in the safe operation of nuclear power plants are implemented and that margins of safety are always maintained. The structure of the organization, management standards and administrative controls should be such that there is a high degree of assurance that safety policies and decisions are implemented, safety is continuously enhanced and a strong safety culture is promoted and supported. The objective of this publication is to guide Member States in setting up an operating organization which facilitates the safe operation of nuclear power plants to a high level internationally. The second objective is to provide guidance on the most important organizational elements in order to contribute to a strong safety

Injury rates from walking, gardening, weightlifting, outdoor bicycling, and aerobics.

Science.gov (United States)

Powell, K E; Heath, G W; Kresnow, M J; Sacks, J J; Branche, C M

1998-08-01

The objective of this survey was to estimate the frequency of injuries associated with five commonly performed moderately intense activities: walking for exercise, gardening and yard work, weightlifting, aerobic dance, and outdoor bicycling. National estimates were derived from weighted responses of over 5,000 individuals contacted between April 28 and September 18, 1994, via random-digit dialing of U.S. residential telephone numbers. Self-reported participation in these five activities in the late spring and summer of 1994 was common, ranging from an estimated 14.5 +/- 1.2% of the population for aerobics (nearly 30 million people) to 73.0 +/- 1.5% for walking (about 138 million people). Among participants, the activity-specific 30-d prevalence of injury ranged from 0.9 +- 0.5% for outdoor bicycle riding to 2.4 +- 1.3% for weightlifting. The estimated number in the 30 d of people injured in the 30 d before their interview ranged from 330,000 for outdoor bicycle riding to 2.1 million for gardening or yard work. Incidence rates for injury causing reduced participation in activity were 1.1 +/- 0.5x100 participantsx30 d for walking, 1.1 +/- 0.4 for gardening, and 3.3 +/- 1.9 for weightlifting. During walking and gardening, men and women were equally likely to be injured, but younger people (18-44 yr) were more likely to be injured than older people (45 + yr). Injury rates were low, yet large numbers of people were injured because participation rates were high. Most injuries were minor, but injuries may reduce participation in these otherwise beneficial activities. Additional studies to confirm the magnitude of the problem, to identify modifiable risk factors, and to recommend methods to reduce the frequency of such injuries are needed.

Embracing Safe Ground Test Facility Operations and Maintenance

Science.gov (United States)

Dunn, Steven C.; Green, Donald R.

2010-01-01

Conducting integrated operations and maintenance in wind tunnel ground test facilities requires a balance of meeting due dates, efficient operation, responsiveness to the test customer, data quality, effective maintenance (relating to readiness and reliability), and personnel and facility safety. Safety is non-negotiable, so the balance must be an "and" with other requirements and needs. Pressure to deliver services faster at increasing levels of quality in under-maintained facilities is typical. A challenge for management is to balance the "need for speed" with safety and quality. It s especially important to communicate this balance across the organization - workers, with a desire to perform, can be tempted to cut corners on defined processes to increase speed. Having a lean staff can extend the time required for pre-test preparations, so providing a safe work environment for facility personnel and providing good stewardship for expensive National capabilities can be put at risk by one well-intending person using at-risk behavior. This paper documents a specific, though typical, operational environment and cites management and worker safety initiatives and tools used to provide a safe work environment. Results are presented and clearly show that the work environment is a relatively safe one, though still not good enough to keep from preventing injury. So, the journey to a zero injury work environment - both in measured reality and in the minds of each employee - continues. The intent of this paper is to provide a benchmark for others with operational environments and stimulate additional sharing and discussion on having and keeping a safe work environment.

'Cycle thieves, we are watching you': impact of a simple signage intervention against bicycle theft.

Directory of Open Access Journals (Sweden)

Daniel Nettle

Full Text Available Bicycle theft is a serious problem in many countries, and there is a lack of evidence concerning effective prevention strategies. Displaying images of 'watching eyes' has been shown to make people behave in more socially desirable ways in a number of settings, but it is not yet clear if this effect can be exploited for purposes of crime prevention. We report the results of a simple intervention on a university campus where signs featuring watching eyes and a related verbal message were displayed above bicycle racks.We installed durable signs at three locations which had experienced high levels of bicycle theft, and used the rest of the university campus as a control location. Reported thefts were monitored for 12 months before and after the intervention. Bicycle thefts decreased by 62% at the experimental locations, but increased by 65% in the control locations, suggesting that the signs were effective, but displaced offending to locations with no signs. The Odds Ratio for the effect of the intervention was 4.28 (95% confidence interval 2.04-8.98, a large effect compared to other place-based crime prevention interventions.The effectiveness of this extremely cheap and simple intervention suggests that there can be considerable crime-reduction benefits to engaging the psychology of surveillance, even in the absence of surveillance itself. Simple interventions for high-crime locations based on this principle should be considered as an adjunct to other measures, although a possible negative consequence is displacement of offending.

The Synthesis of cis- and trans-Fused Bicyclic Sugar Amino Acids

NARCIS (Netherlands)

Risseeuw, Martijn D.P.; Grotenbreg, Gijsbert M.; Witte, Martin D.; Tuin, Adriaan W.; Leeuwenburgh, Michiel A.; Marel, Gijsbert A. van der; Overkleeft, Herman S.; Overhand, Mark

2006-01-01

Four isomeric bicyclic sugar amino acids (SAAs) were prepared from an α-acetylenic-C-glucoside by employing a Petasis olefination and a ring-closing metathesis (RCM) as key steps. The applicability of the resulting SAAs in solid-phase peptide synthesis was demonstrated by the synthesis of a

Inherently safe high temperature gas-cooled reactor

International Nuclear Information System (INIS)

Yamada, Masao; Hayakawa, Hitoshi

1987-01-01

It is recognized in general that High Temperature Gas-cooled Reactors have remarkable characteristics in inherent safety and it is well known that credits of the time margin have been admitted for accident evaluation in the licensing of the currently operating prototype HTGRs (300 MWe class). Recently, more inherently safe HTGRs are being developed in various countries and drawing attention on their possibility for urban siting. The inherent safety characteristics of these HTRs differ each other depending on their design philosophy and on the features of the components/structures which constitute the plant. At first, the specific features/characteristics of the elemental components/structures of the HTRs are explained one by one and then the overall safety features/characteristics of these HTR plants are explained in connection with their design philosophy and combination of the elemental features. Taking the KWU/Interatom Modular Reactor System as an example, the particular design philosophy and safety characteristics of the inherently safe HTR are explained with a result of preliminary evaluation on the possibility of siting close to densely populated area. (author)

Safe waste management practices in beryllium facilities

International Nuclear Information System (INIS)

Bhat, P.N.; Soundararajan, S.; Sharma, D.N.

2012-01-01

Beryllium, an element with the atomic symbol Be, atomic number 4, has very high stiffness to weight ratio and low density. It has good electrical conductive properties with low coefficient of thermal expansion. These properties make the metal beryllium very useful in varied technological endeavours, However, beryllium is recognised as one of the most toxic metals. Revelation of toxic effects of beryllium resulted in institution of stringent health and safety practices in beryllium handling facilities. The waste generated in such facilities may contain traces of beryllium. Any such waste should be treated as toxic waste and suitable safe waste management practices should be adopted. By instituting appropriate waste management practice and through a meticulously incorporated safety measures and continuous surveillance exercised in such facilities, total safety can be ensured. This paper broadly discusses health hazards posed by beryllium and safe methods of management of beryllium bearing wastes. (author)

Safe Human-Robot Cooperation in an Industrial Environment

Directory of Open Access Journals (Sweden)

Nicola Pedrocchi

2013-01-01

Full Text Available The standard EN ISO10218 is fostering the implementation of hybrid production systems, i.e., production systems characterized by a close relationship among human operators and robots in cooperative tasks. Human-robot hybrid systems could have a big economic benefit in small and medium sized production, even if this new paradigm introduces mandatory, challenging safety aspects. Among various requirements for collaborative workspaces, safety-assurance involves two different application layers; the algorithms enabling safe space-sharing between humans and robots and the enabling technologies allowing acquisition data from sensor fusion and environmental data analysing. This paper addresses both the problems: a collision avoidance strategy allowing on-line re-planning of robot motion and a safe network of unsafe devices as a suggested infrastructure for functional safety achievement.

Inherently safe characteristics of nuclear reactors

International Nuclear Information System (INIS)

1989-01-01

This report is based on a detailed study which was carried out by Colenco (a company of the Motor-Columbus Group) on behalf of the Commission of the European Communities (CEC). It presents a summary of this study and concentrates more on the generic issues involved in the subject of inherent safety in nuclear power plants. It is assumed that the reader is reasonably familiar with the design outline of the systems included in the report. The report examines the role of inherent design features in achieving the safety of nuclear power plants as an alternative to the practice, which is largely followed in current reactors, of achieving safety by the addition of engineered safety features. The report examines current reactor systems to identify the extent to which their characteristics are either already inherently safe or, on the other hand, have inherent characteristics that require protective action to be taken. It then considers the advantages of introducing design changes to improve their inherent safety characteristics. Next, it looks at some new reactor types for which claims of inherent safety are made to see to what extent these claims are justified. The general question is then considered whether adoption of the inherently safe reactors would give advantages (by reducing risk in real terms or by improving the public acceptability of nuclear power) which are sufficient to offset the expected high costs and the technical risks associated with any new technology

Integration of bicycling and walking facilities into the infrastructure of urban communities.

Science.gov (United States)

2012-02-01

Several manuals, handbooks and web resources exist to provide varied guidance on planning for and designing bicycle and pedestrian facilities, yet there are no specific indications about which of the varied treatments in these guides work well for us...

Summertime Health and Safety

Centers for Disease Control (CDC) Podcasts

This CDC series features topics on staying safe and healthy during the summer, whether on the road or on the water. Podcasts provide tips for general audiences on avoiding water-related injuries, driving safely, safety when outdoors, and celebrating safety on the 4th of July.

Implementation of the safety culture for HANARO safety management

Energy Technology Data Exchange (ETDEWEB)

Wu, Jongsup; Han, Geeyang; Kim, Iksoo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2008-11-15

Safety is the fundamental principal upon which a management system is based. The IAEA INSAG (International Nuclear Safety Group) states the general aims of a safety management system. One of which is to foster and support a strong safety culture through the development and reinforcement of good safety attitudes and behavior in individuals and teams, so as to allow them to carry out their tasks safely. The safety culture activities have been implemented and the importance of a safety management in nuclear activities for a reactor application and utilization has also been emphasized for more than 10 years in HANARO which is a 30MW multi-purpose research reactor that achieved its first criticality in February 1995. The safety culture activities and implementations have been conducted continuously to enhance its safe operation such as the seminars and lectures related to safety matters, participation in international workshops and the development of safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture, the development of operational safety performance indicators (SPIs), the preparation of a safety text book and the development of a e-learning program for a safety education purpose.

Implementation of the safety culture for HANARO safety management

International Nuclear Information System (INIS)

Wu, Jongsup; Han, Geeyang; Kim, Iksoo

2008-01-01

Safety is the fundamental principal upon which a management system is based. The IAEA INSAG (International Nuclear Safety Group) states the general aims of a safety management system. One of which is to foster and support a strong safety culture through the development and reinforcement of good safety attitudes and behavior in individuals and teams, so as to allow them to carry out their tasks safely. The safety culture activities have been implemented and the importance of a safety management in nuclear activities for a reactor application and utilization has also been emphasized for more than 10 years in HANARO which is a 30MW multi-purpose research reactor that achieved its first criticality in February 1995. The safety culture activities and implementations have been conducted continuously to enhance its safe operation such as the seminars and lectures related to safety matters, participation in international workshops and the development of safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture, the development of operational safety performance indicators (SPIs), the preparation of a safety text book and the development of a e-learning program for a safety education purpose

From on-road trial evaluation of electric and conventional bicycles to comparison with other urban transport modes: Case study in the city of Lisbon, Portugal

International Nuclear Information System (INIS)

Baptista, Patrícia; Pina, André; Duarte, Gonçalo; Rolim, Catarina; Pereira, Gonçalo; Silva, Carlos; Farias, Tiago

2015-01-01

Highlights: • Five transportation alternatives were compared in Lisbon, Portugal. • Electric bicycles allowed increasing average speed from 8% to 26%, mainly in positive slopes. • WTW energy consumption of electric bicycle was 1–11% of the other transport options impacts. • Alternatives’ low energy needs and zero local emissions contributes to improve urban air quality. - Abstract: Increasing energy costs, energy consumption and emissions profiles prompted the promotion of different transportation alternatives. This research work addresses the comparison of trip dynamics, energy consumption, CO 2 and NO x Well-to-Wheel impacts of 5 transportation alternatives (conventional and electric bicycles, conventional and electric vehicles and an urban bus) in Lisbon, Portugal. On-road monitoring of a specific route in Lisbon revealed that bikers using electric bicycles increased their average speed between 8% and 26% compared to their use of the conventional bicycle, especially in the route sections with positive slopes (up to 49% increases). Electric bicycles result in a Tank-to-Wheel energy consumption of 0.028 MJ/km, allowing an average autonomy of 46 km between recharging. When comparing the 5 transportation alternatives, the electric bicycles presented a higher travel time of 13.5%, 1.9% and 7.8% over the bus, low powered electric vehicle, and standard electric vehicle/conventional technologies, respectively. Regarding the Well-to-Wheel energy consumption analysis, the results indicated that, when compared to the other transportation solutions, the electric bicycle only uses 11%, 3%, 1%, 2% and 4% of the energy required when using the low powered electric vehicle, standard electric vehicle, conventional gasoline and diesel technologies and bus, respectively. Furthermore, the analysis of Well-to-Wheel emissions reveals that the electric bicycle has 13% and 4% lower CO 2 emissions and 12% and 4% lower NO x emissions when compared to the low powered and

Advancing sustainable safety : National Road Safety Outlook for 2005-2020.

NARCIS (Netherlands)

Wegman, F.C.M. & Aarts, L.T. (eds.)

2006-01-01

Advancing Sustainable Safety: National Road Safety Outlook for 2005-2020 is the follow-up to Naar een duurzaam veilig wegverkeer [Towards sustainably safe road traffic] (Koornstra et al., 1992). Advancing Sustainable Safety is a critique of Sustainable Safety. In this advanced version, adaptations

Safe Cycling Network : developing a system for assessing the safety of cycling infrastructure. Report on behalf of the Royal Dutch Touring Club ANWB.

NARCIS (Netherlands)

Wijlhuizen, G.J. Dijkstra, A. & Petegem, J.W.H. van

2015-01-01

ANWB has initiated a project to improve the safety of the cycling infrastructure in the Netherlands — and, in the longer term, also in other countries: the Safe Cycling Network project. This project was inspired in part by the international European Road Assessment Programme (EuroRAP/iRAP). The

[Medical coverage of a road bicycle race].

Science.gov (United States)

Reifferscheid, Florian; Stuhr, Markus; Harding, Ulf; Schüler, Christine; Thoms, Jürgen; Püschel, Klaus; Kappus, Stefan

2010-07-01

Major sport events require adequate expertise and experience concerning medical coverage and support. Medical and ambulance services need to cover both participants and spectators. Likewise, residents at the venue need to be provided for. Concepts have to include the possibility of major incidents related to the event. Using the example of the Hamburg Cyclassics, a road bicycle race and major event for professional and amateur cyclists, this article describes the medical coverage, number of patients, types of injuries and emergencies. Objectives regarding the planning of future events and essential medical coverage are consequently discussed. (c) Georg Thieme Verlag Stuttgart-New York.

Nuclear Reactor RA Safety Report, Vol. 14, Safety protection measures

International Nuclear Information System (INIS)

1986-11-01

Nuclear reactor accidents can be caused by three type of errors: failure of reactor components including (1) control and measuring instrumentation, (2) errors in operation procedure, (3) natural disasters. Safety during reactor operation are secured during its design and construction and later during operation. Both construction and administrative procedures are applied to attain safe operation. Technical safety features include fission product barriers, fuel elements cladding, primary reactor components (reactor vessel, primary cooling pipes, heat exchanger in the pump), reactor building. Safety system is the system for safe reactor shutdown and auxiliary safety system. RA reactor operating regulations and instructions are administrative acts applied to avoid possible human error caused accidents [sr

A Bayesian Network Model on the Public Bicycle Choice Behavior of Residents: A Case Study of Xi’an

Directory of Open Access Journals (Sweden)

Qiuping Wang

2017-01-01

Full Text Available In order to study the main factors affecting the behaviors that city residents make regarding public bicycle choice and to further study the public bicycle user’s personal characteristics and travel characteristics, a travel mode choice model based on a Bayesian network was established. Taking residents of Xi’an as the research object, a K2 algorithm combined with mutual information and expert knowledge was proposed for Bayesian network structure learning. The Bayesian estimation method was used to estimate the parameters of the network, and a Bayesian network model was established to reflect the interactions among the public bicycle choice behaviors along with other major factors. The K-fold cross-validation method was used to validate the model performance, and the hit rate of each travel mode was more than 80%, indicating the precision of the proposed model. Experimental results also present the higher classification accuracy of the proposed model. Therefore, it may be concluded that the resident travel mode choice may be accurately predicted according to the Bayesian network model proposed in our study. Additionally, this model may be employed to analyze and discuss changes in the resident public bicycle choice and to note that they may possibly be influenced by different travelers’ characteristics and trip characteristics.

Distracted Walking, Bicycling, and Driving: Systematic Review and Meta-Analysis of Mobile Technology and Youth Crash Risk.

Science.gov (United States)

Stavrinos, Despina; Pope, Caitlin N; Shen, Jiabin; Schwebel, David C

2018-01-01

This article examined the impact of mobile technology on young pedestrians, bicyclists, and drivers. A systematic search yielded 41 articles meeting inclusion criteria: peer-reviewed, published before February 1, 2016, behavioral outcome related to pedestrian, bicycling, or driving in the presence of mobile technology use, youth sample. Eleven studies were meta-analyzed to evaluate increased risk for crash/near-crash while distracted. Risk of bias and quality of research were assessed. Across methodologies, developmental stages, and type of distracting task, mobile technology use impairs youth safety on the road. Quality of evidence was low (pedestrian) to moderate (driving). Findings are discussed from the perspective of cognitive and visual distractions. Policy and behavioral efforts should continue to reduce mobile technology use in transportation settings. © 2017 The Authors. Child Development © 2017 Society for Research in Child Development, Inc.

2002 bicycle transportation user survey ; developing intermodal connections for the 21st century

Science.gov (United States)

2004-12-01

The Rhode Island Department of Transportation (RIDOT) has been on the forefront in recognizing the potential for bicycle travel to provide mobility, reduce congestion, improve environmental quality, and promote healthy lifestyles. An important compon...

The effect of cannabis on regular cannabis consumers' ability to ride a bicycle.

Science.gov (United States)

Hartung, Benno; Schwender, Holger; Roth, Eckhard H; Hellen, Florence; Mindiashvili, Nona; Rickert, Annette; Ritz-Timme, Stefanie; Grieser, Almut; Monticelli, Fabio; Daldrup, Thomas

2016-05-01

To assess the effects of cannabis on the ability required to ride a bicycle, repetitive practical cycling tests and medical examinations were carried out before and after inhalative consumption of cannabis. A maximum of three joints with body weight-adapted THC content (300 μg THC per kg body weight) could be consumed by each test subject. Fourteen regular cannabis-consuming test subjects were studied (12 males, 2 females). In summary, only a few driving faults were observed even under the influence of very high THC concentrations. A defined THC concentration that leads to an inability to ride a bicycle cannot be presented. The test subjects showed only slight distinctive features that can be documented using a medical test routinely run for persons under suspicion of driving under the influence of alcohol or drugs.

Aminocyclopentanols as sugar mimics. Synthesis from unsaturated bicyclic lactones by Overman rearrangement

DEFF Research Database (Denmark)

Bøjstrup, Marie; Fanefjord, Mette; Lundt, Inge

2007-01-01

Bicyclic cyclopentane lactones, prepared from bromodeoxyaldonolactones, were transformed into aminocyclopentanols with an Overman rearrangement as the key step. Two of the compounds prepared, 7 and 19, were found to be good inhibitors of jack bean alpha-mannosidase and beta-D-N-acetylglucosaminid...

Childhood road safety behaviors in China: a cross-sectional study of Guangzhou city.

Science.gov (United States)

Yu, Jie; Zou, Nan; Liu, Yue; Fu, Lianning; Liu, Liya; Yuan, Ann

2012-01-01

This article examines traffic safety behaviors for different types of road users among children aged 0 to 17 years in Guangzhou, China. A stratified cluster sample of 7034 children from pediatric clinics (816 children aged 0-2 years who are receiving vaccines), kindergartens (1148 children aged 3-5 years), primary schools (2410 children aged 6-11 years), and secondary schools (2660 children aged 12-17 years) was collected by self-reported questionnaire surveys. The respondents were instructed to respond to each behavior question, using response choices scoring from 0 to 3. An 18-item-weighted Road Safety Behavior Index (RSBI), including 5 items for walking, 7 items for cycling, 2 items for public transport, and 4 items for private motor vehicles, was developed to quantify the child road safety behaviors and further investigate their interrelations with the sociodemographic factors among different age groups and travel categories. A higher RSBI indicates a lower risk of childhood road safety. Results from statistical analysis indicate that (1) the effects of children's sociodemographic characteristics on the RSBIs differ greatly concerning each particular travel category; and (2) RSBIs are associated more with child-related characteristics than with parent-related characteristics as the age of the children's group increases. The research findings from analyzing the self-report questionnaires were further validated with field observational records, medical records, and police records. The article concludes with some recommendations for preventing the increasing toll of road traffic injury among Chinese children, which include (1) continuing educational efforts to increase knowledge of road safety and reduce traffic risk behaviors for children and their parents; (2) creating a safe and convenient environment for walking, cycling, and public transport travelers; and (3) promoting legislation and enforcement such as the mandatory usage of bicycle helmets and child

Safe communities in China as a strategy for injury prevention and safety promotion programmes in the era of rapid economic growth.

Science.gov (United States)

Wang, Shu-Mei; Dalal, Koustuv

2013-02-01

Due to its rapid economic development, China is facing a huge health, social, and economic burden resulting from injuries. The study's objective was to examine Safe Communities in China as a strategy for injury prevention and safety promotion programmes in the era of rapid economic growth. Literature searches in English and Chinese, which included grey literature, were performed on the Chinese Journal Full-text Search System and Medline, using the words "Safe Community", "injury", "economics", and "prevention". The results showed that the existing 35 recognized members of the International Safe Community Network have not placed due emphasis on suicide prevention, which is one of the leading problems in both rural and urban China. A few groups, such as children, the elderly, cyclists, and pedestrians, have received due emphasis, while other vulnerable groups, such as migrant workers, motorcyclists, students, players, and farmers have not received the necessary attention from the Safe Community perspective. As the evidence describes, Safe Communities in China can be a very effective strategy for injury prevention, but four aspects need to be strengthened in the future: (1) establish and strengthen the policy and regulations in terms of injury prevention at the national level; (2) create a system to involve professional organizations and personnel in projects; (3) consider the economic development status of different parts of China; and (4) intentional injury prevention should receive greater attention.

A field-based approach for examining bicycle seat design effects on seat pressure and perceived stability.

Science.gov (United States)

Bressel, Eadric; Bliss, Shantelle; Cronin, John

2009-05-01

The purpose of this study was to investigate the effect of various bicycle seat designs on seat pressure and perceived stability in male and female cyclists using a unique field-based methodology. Thirty participants, comprising male and female cyclists, pedaled a bicycle at 118W over a 350m flat course under three different seat conditions: standard seat, a seat with a partial anterior cutout, and a seat with a complete anterior cutout. The pressure between the bicycle seat and perineum of the cyclist was collected with a remote pressure-sensing mat, and perceived stability was assessed using a continuous visual analogue scale. Anterior seat pressure and stability values for the complete cutout seat were significantly lower (p<0.05; 62-101%) than values for the standard and partial cutout designs. These findings were consistent between males and females. Our results would support the contention that the choice of saddle design should not be dictated by interface pressure alone since optimal anterior seat pressure and perceived seat stability appear to be inversely related.

Safety in paediatric imaging

International Nuclear Information System (INIS)

Carter, D.; Filice, I.; Murray, D.; Thomas, K.

2006-01-01

Those of us working in a dedicated paediatric environment are aware of the important safety issues with regard to paediatrics. Our goal when working with paediatric patients, the goal is to obtain the best quality images while keeping patients safe and their distress to a minimum. This article will discuss some of the issues regarding paediatric safety in a diagnostic imaging department, including radiation doses and the risk to paediatric patients, reducing medication errors, safe sedation practice and environmental safety. Also discussed are some conditions requiring special consideration to maintain patient safety such as epiglottitis and suspected child abuse. Promotion of a patient/family-centered care system will create an environment of trust where parents or guardians will know that their children are being well cared for in a safe, effective environment. (author)

Tertiary Student Attitudes to Bicycle Commuting in a Regional Australian University

Science.gov (United States)

Whannell, Patricia; Whannell, Robert; White, Richard

2012-01-01

Purpose: The purpose of this paper is to provide executive management at a regional university with empirical data to justify, or otherwise, a substantial outlay of funds to support bicycle commuting as a viable strategy for the reduction of traffic congestion. Design/methodology/approach: A custom designed questionnaire was completed by 270…

Psychosocial aspect of safe operation in Japanese nuclear power plants

International Nuclear Information System (INIS)

Kuroda, Isao

1988-01-01

It is not easy to reveal the reasons of safe operation of N.P.P. because many complicated factors are interrelated. However, to clarify the effective factors of the recent safe operation of Japanese N.P.P. is the important thema of research to continue this condition and the more improved level. At present, the follwing factors can be pointed out; 1) Influential safety policy of regulatory structures. 2) Enthusiastic and careful company policy on N.P.P. safety. 3) Close and stable relationship of the industries with companies on research, training and maintenance. 4) Collaborated safety research among scientific facilities, companies and manufacturers. 5) Good organization and management for N.P.P. personnel. 6) Well organized training program in company and training facilities. 7) Highly motivated N.P.P. personnel with high educational background. 8) Company atmosphere on N.P.P. safety. 9) Public opinion on nuclear power safety. (author)

Exercise capacity in non-specific chronic low back pain patients : A lean body mass-based Astrand bicycle test; Reliability, validity and feasibility

NARCIS (Netherlands)

Hodselmans, Audy P.; Dijkstra, Pieter U.; Geertzen, Jan H. B.; van der Schans, Cees P.

Objective Measurement of exercise capacity is essential in patients with non-specific chronic low back pain (CLBP). However, the conventional Astrand bicycle test is not feasible in patients with a very poor aerobic capacity. Therefore the Astrand bicycles test for non-specific CLBP patients based

Safe actinide disposition in molten salt reactors

International Nuclear Information System (INIS)

Gat, U.

1997-01-01

Safe molten salt reactors (MSR) can readily accommodate the burning of all fissile actinides. Only minor compromises associated with plutonium are required. The MSRs can dispose safely of actinides and long lived isotopes to result in safer and simpler waste. Disposing of actinides in MSRs does increase the source term of a safety optimized MSR. It is concluded that the burning and transmutation of actinides in MSRs can be done in a safe manner. Development is needed for the processing to handle and separate the actinides. Calculations are needed to establish the neutron economy and the fuel management. 9 refs

Safety culture in Bayesian and legal contexts

International Nuclear Information System (INIS)

Krug, H.E.P. Jr.

1992-01-01

While contemplating the similarities between the law of torts and concepts of safety, the author realized that there was a close correspondence between the law of negligence and the way safety ought to be generally defined. This definition of safety is provided herein. A safety culture must have an adequate definition of safety in order to function most effectively. This paper provides a practical definition of safety that answers the question 'How safe is safe enough? The development rests on two bases: the subjectivistic-Bayesian definition of probability and certain legal definitions primarily from the tort law of negligence. The development also leads to the conclusion that one cannot generally expect greater specificity in determining how safe is safe enough than one finds in the legal definition of liability under the tort of negligence. It then follows that some of the public's aversion to complex technical undertakings is rooted in its typically intuitive and vague notions concerning safety

‘Cycle Thieves, We Are Watching You’: Impact of a Simple Signage Intervention against Bicycle Theft

Science.gov (United States)

Nettle, Daniel; Nott, Kenneth; Bateson, Melissa

2012-01-01

Background Bicycle theft is a serious problem in many countries, and there is a lack of evidence concerning effective prevention strategies. Displaying images of ‘watching eyes’ has been shown to make people behave in more socially desirable ways in a number of settings, but it is not yet clear if this effect can be exploited for purposes of crime prevention. We report the results of a simple intervention on a university campus where signs featuring watching eyes and a related verbal message were displayed above bicycle racks. Methodology and Principal Findings We installed durable signs at three locations which had experienced high levels of bicycle theft, and used the rest of the university campus as a control location. Reported thefts were monitored for 12 months before and after the intervention. Bicycle thefts decreased by 62% at the experimental locations, but increased by 65% in the control locations, suggesting that the signs were effective, but displaced offending to locations with no signs. The Odds Ratio for the effect of the intervention was 4.28 (95% confidence interval 2.04–8.98), a large effect compared to other place-based crime prevention interventions. Conclusions and Significance The effectiveness of this extremely cheap and simple intervention suggests that there can be considerable crime-reduction benefits to engaging the psychology of surveillance, even in the absence of surveillance itself. Simple interventions for high-crime locations based on this principle should be considered as an adjunct to other measures, although a possible negative consequence is displacement of offending. PMID:23251615

Bicycle physics and biomechanics. Techniques - formulas - laws. 9. rev. and enl. ed.; Fahrradphysik und Biomechanik. Technik - Formeln - Gesetze

Energy Technology Data Exchange (ETDEWEB)

Gressmann, M.

2005-07-01

Michael Gressmann explains the physical aspects of bicycle riding by numerous concrete examples: Acceleration and velocity, friction and rolling resistance, steering-gear angle and displacement, under- and override, bicycle gear/chain gear, muscle activity in the pedaling, energy and power balance. From this follow many interesting hints for the riding technique and the selection of the technical material. Especially valuable for the practitioner: Considerations and calculations on aerial resistance, gyro forces, frame geometry, seat position, and pedaling frequency.

Safe transport of radioactive material

International Nuclear Information System (INIS)

1990-01-01

Recently the Agency redefined its policy for education and training in radiation safety. The emphasis is now on long-term strategic planning of general education and training programmes. In line with this general policy the Agency's Standing Advisory Group for the Safe Transport of Radioactive Material (SAGSTRAM) in its 7th meeting (April 1989) agreed that increased training activity should be deployed in the area of transport. SAGSTRAM specifically recommended the development of a standard training programme on this subject area, including audio-visual aids, in order to assist Member States in the implementation of the Agency's Regulations for the Safe Transport of Radioactive Material. This training programme should be substantiated by a biennial training course which is thought to be held either as an Interregional or a Regional Course depending on demand. This training manual, issued as a first publication in the Training Course Series, represents the basic text material for future training courses in transport safety. The topic areas covered by this training manual and most of the texts have been developed from the course material used for the 1987 Bristol Interregional Course on Transport Safety. The training manual is intended to give guidance to the lecturers of a course and will be provided to the participants for retention. Refs, figs and tabs

Production of liquid fuels and chemicals from pyrolysis of Bangladeshi bicycle/rickshaw tire wastes

Energy Technology Data Exchange (ETDEWEB)

Islam, M. Rofiqul; Tushar, M.S.H.K. [Department of Mechanical Engineering, Rajshahi University of Engineering and Technology, Rajshahi 6204 (Bangladesh); Haniu, H. [Department of Mechanical Engineering, Kitami Institute of Technology, Kitami City, Hokkaido 090-8507 (Japan)

2008-05-15

Tire wastes in the form of used bicycle/rickshaw tires available in Bangladesh were pyrolyzed in a fixed-bed fire-tube heating reactor under different pyrolysis conditions to determine the role of final temperature, sweeping gas flow rate and feed size on the product yields and liquid product composition. Final temperature range studied was between 375 and 575 C and the highest liquid product yield was obtained at 475 C. Liquid products obtained under the most suitable conditions were characterized by elemental analyses, FT-IR, {sup 1}H NMR and GC-MS techniques. The results show that it is possible to obtain liquid products that are comparable to petroleum fuels and valuable chemical feedstock from bicycle/rickshaw tire wastes if the pyrolysis conditions are chosen accordingly. (author)

The safe management of sources of radiation: Principles and strategies. INSAG-11. A report by the International Nuclear Safety Advisory Group (Russian Edition)

International Nuclear Information System (INIS)

2015-01-01

The IAEA activities relating to nuclear safety are based upon a number of premises. First and foremost, each Member State bears full responsibility for the safety of its nuclear facilities. States can be advised, but cannot be relieved of this responsibility. Secondly, much can be gained by exchanging experience; lessons learned can prevent accidents. Finally, the image of nuclear safety is international; a serious accident anywhere affects the public view of nuclear power everywhere. With the intention of strengthening its contribution to ensuring safety of nuclear power plants, the IAEA established the International Safety Advisory Group (INSAG), whose duties include serving as a forum for the exchange of information on nuclear safety issues of international significance and formulating commonly shared safety principles. The present report deals with the general principles governing the safety of all sources of radiation and with application of these principles. It intends to show that, at the conceptual level, the distinction traditionally made between nuclear safety and radiation protection is hardly justifiable. It is intended primarily for those non-specialists who need to take decisions about safe management of sources of radiation and who wish to gain a better understanding of the approach followed in managing the safety of these sources

Consumers’ preferences for “bicycle poultry” in Benin

DEFF Research Database (Denmark)

Sodjinou, Epiphane; Henningsen, Arne; Koudande, Delphin O.

2015-01-01

Village poultry, also termed "bicycle poultry," is produced in scavenging farming systems and is a chewy meat with a low fat content, and constitutes an important source of meat in many African countries. This study investigates consumers’ preferences regarding the physical traits of these birds...... (notably chickens, ducks and guinea fowl) in the Republic of Benin. For this purpose, we applied the hedonic price method on field data collected from retailers in four urban and five rural markets. We found that meatier drake and meatier guinea fowl with white plumage are preferred by consumers who...

Managing Cassini Safe Mode Attitude at Saturn

Science.gov (United States)

Burk, Thomas A.

2010-01-01

The Cassini spacecraft was launched on October 15, 1997 and arrived at Saturn on June 30, 2004. It has performed detailed observations and remote sensing of Saturn, its rings, and its satellites since that time. In the event safe mode interrupts normal orbital operations, Cassini has flight software fault protection algorithms to detect, isolate, and recover to a thermally safe and commandable attitude and then wait for further instructions from the ground. But the Saturn environment is complex, and safety hazards change depending on where Cassini is in its orbital trajectory around Saturn. Selecting an appropriate safe mode attitude that insures safe operation in the Saturn environment, including keeping the star tracker field of view clear of bright bodies, while maintaining a quiescent, commandable attitude, is a significant challenge. This paper discusses the Cassini safe table management strategy and the key criteria that must be considered, especially during low altitude flybys of Titan, in deciding what spacecraft attitude should be used in the event of safe mode.

Car Seat Safety

Science.gov (United States)

... Staying Safe Videos for Educators Search English Español Car Seat Safety KidsHealth / For Parents / Car Seat Safety ... certified child passenger safety technician.) Guidelines for Choosing Car Seats Choose a seat with a label that ...

Safe pediatric surgery: development and validation of preoperative interventions checklist

Directory of Open Access Journals (Sweden)

Maria Paula de Oliveira Pires

2013-09-01

Full Text Available OBJECTIVES: this study was aimed at developing and validating a checklist of preoperative pediatric interventions related to the safety of surgical patients. METHOD: methodological study concerning the construction and validation of an instrument with safe preoperative care indicators. The checklist was subject to validation through the Delphi technique, establishing a consensus level of 80%. RESULTS: five professional specialists in the area conducted the validation and a consensus on the content and the construct was reached after two applications of the Delphi technique. CONCLUSION: the "Safe Pediatric Surgery Checklist", simulating the preoperative trajectory of children, is an instrument capable of contributing to the preparation and promotion of safe surgery, as it identifies the presence or absence of measures required to promote patient safety.

Does the Intramolecular Hydrogen Bond Affect the Spectroscopic Properties of Bicyclic Diazole Heterocycles?

Directory of Open Access Journals (Sweden)

Paweł Misiak

2018-01-01

Full Text Available The formation of an intramolecular hydrogen bond in pyrrolo[1,2-a]pyrazin-1(2H-one bicyclic diazoles was analyzed, and the influence of N-substitution on HB formation is discussed in this study. B3LYP/aug-cc-pVDZ calculations were performed for the diazole, and the quantum theory of atoms in molecules (QTAIM approach as well as the natural bond orbital (NBO method was applied to analyze the strength of this interaction. It was found that the intramolecular hydrogen bond that closes an extra ring between the C=O proton acceptor group and the CH proton donor, that is, C=O⋯H–C, influences the spectroscopic properties of pyrrolopyrazine bicyclic diazoles, particularly the carbonyl frequencies. The influence of N-substitution on the aromaticity of heterocyclic rings is also discussed in this report.

The End-To-End Safety Verification Process Implemented to Ensure Safe Operations of the Columbus Research Module

Science.gov (United States)

Arndt, J.; Kreimer, J.

2010-09-01

The European Space Laboratory COLUMBUS was launched in February 2008 with NASA Space Shuttle Atlantis. Since successful docking and activation this manned laboratory forms part of the International Space Station(ISS). Depending on the objectives of the Mission Increments the on-orbit configuration of the COLUMBUS Module varies with each increment. This paper describes the end-to-end verification which has been implemented to ensure safe operations under the condition of a changing on-orbit configuration. That verification process has to cover not only the configuration changes as foreseen by the Mission Increment planning but also those configuration changes on short notice which become necessary due to near real-time requests initiated by crew or Flight Control, and changes - most challenging since unpredictable - due to on-orbit anomalies. Subject of the safety verification is on one hand the on orbit configuration itself including the hardware and software products, on the other hand the related Ground facilities needed for commanding of and communication to the on-orbit System. But also the operational products, e.g. the procedures prepared for crew and ground control in accordance to increment planning, are subject of the overall safety verification. In order to analyse the on-orbit configuration for potential hazards and to verify the implementation of the related Safety required hazard controls, a hierarchical approach is applied. The key element of the analytical safety integration of the whole COLUMBUS Payload Complement including hardware owned by International Partners is the Integrated Experiment Hazard Assessment(IEHA). The IEHA especially identifies those hazardous scenarios which could potentially arise through physical and operational interaction of experiments. A major challenge is the implementation of a Safety process which owns quite some rigidity in order to provide reliable verification of on-board Safety and which likewise provides enough

Safe Transport of Radioactive Material, Philosophy and Overview

Energy Technology Data Exchange (ETDEWEB)

EL-Shinawy, R M.K. [Radiation Protection Dept., Nuclear Rasearch Center, Atomic Energy Authority, Cairo (Egypt)

2008-07-01

Safe transport of radioactive material regulations issued by IAEA since 1961, provide standards for insuring a high level of safety of people,transport workers, property and environment against radiation, contamination and criticality hazards as well as thermal effects associated with the transport of the radioactive wastes and material. The history ,development, philosophy and scope of these international and national regulations were mentioned as well as the different supporting documents to the regulations for safe transport of radioactive material were identified.The first supporting document , namely TS - G-1.1(ST-2) ,Advisory material is also issued by the IAEA.It contains both the advisory and explanatory materials previously published in safety series Nos 7and 37 and therefore TS-G-1.1 (ST-2) will supersede safety series Nos 7 and 37. The second supporting document namely TS-G-1.2 (ST-3), planning and preparing for emergency response to transport accidents involving radioactive material ,which will supersede safety series No 87. In addition to quality assurance (SS no.113), compliance assurance (SS no. 112), the training manual and others.

Safe Transport of Radioactive Material, Philosophy and Overview

International Nuclear Information System (INIS)

EL-Shinawy, R.M.K.

2008-01-01

Safe transport of radioactive material regulations issued by IAEA since 1961, provide standards for insuring a high level of safety of people,transport workers, property and environment against radiation, contamination and criticality hazards as well as thermal effects associated with the transport of the radioactive wastes and material. The history ,development, philosophy and scope of these international and national regulations were mentioned as well as the different supporting documents to the regulations for safe transport of radioactive material were identified.The first supporting document , namely TS - G-1.1(ST-2) ,Advisory material is also issued by the IAEA.It contains both the advisory and explanatory materials previously published in safety series Nos 7and 37 and therefore TS-G-1.1 (ST-2) will supersede safety series Nos 7 and 37. The second supporting document namely TS-G-1.2 (ST-3), planning and preparing for emergency response to transport accidents involving radioactive material ,which will supersede safety series No 87. In addition to quality assurance (SS no.113), compliance assurance (SS no. 112), the training manual and others

Risk assessments and safe machinery ensuring compliance with the EU directives

CERN Document Server

Jespen, Torben

2016-01-01

This book describes the prerequisites for the placing on the market and the safe use of machinery in compliance with the relevant EU Directives, especially the Machinery Directive 2006/42. It provides readers with high-level knowledge concerning the Essential Health and Safety Requirements (EHSR) that machinery must fulfill. The approach and principles of the Machinery Directive were most recently made worldwide acknowledged in the ILO code of practice on safe machinery, released in 2013. The book addresses that code, as well as providing valuable insight into other EU Product and Workplace legislation. Focusing on the key aspect of safe machinery, the “machinery safety risk assessment”, which allows readers to better understand the more difficult aspects of risk assessments, the book equips readers to tackle problems at the manufacturing stage and in different use scenarios, introducing them to risk reduction techniques and functional safety aspects.

Pesticide Health and Safety Information

Science.gov (United States)

Animal Health Safe Use Practices Pest Control Food Safety Low Risk Pesticides Integrated Pest Management directed by the product label. Pesticides may be ingested if stored improperly in food or beverage ; Environment Human Health Animal Health Safe Use Practices Food Safety Environment Air Water Soil Wildlife

Nuclide documentation. Element specific parameter values used in the biospheric models of the safety assessments SR 97 and SAFE

International Nuclear Information System (INIS)

Karlsson, Sara; Bergstroem, Ulla

2002-05-01

In this report the element and nuclide specific parameter values used in the biospheric models of the safety assessments SR 97 and SAFE are presented. The references used are presented and where necessary the process of estimation of data is described. The parameters treated in this report are distribution coefficients in soil, organic soil and suspended matter in freshwater and brackish water, root uptake factors for pasturage, cereals, root crops and vegetables, bioaccumulation factors for freshwater fish, brackish water fish, freshwater invertebrates and marine water plants, transfer coefficients for transfer to milk and meat, translocation factors and dose coefficients for external exposure, ingestion (age-dependent values) and inhalation (age-dependent values). The radionuclides treated are those which could be of interest in the two safety assessments. Physical data such as half-lives and type of decay are also presented

Nuclide documentation. Element specific parameter values used in the biospheric models of the safety assessments SR 97 and SAFE

Energy Technology Data Exchange (ETDEWEB)

Karlsson, Sara; Bergstroem, Ulla [Studsvik Eco and Safety AB, Nykoeping (Sweden)

2002-05-01

In this report the element and nuclide specific parameter values used in the biospheric models of the safety assessments SR 97 and SAFE are presented. The references used are presented and where necessary the process of estimation of data is described. The parameters treated in this report are distribution coefficients in soil, organic soil and suspended matter in freshwater and brackish water, root uptake factors for pasturage, cereals, root crops and vegetables, bioaccumulation factors for freshwater fish, brackish water fish, freshwater invertebrates and marine water plants, transfer coefficients for transfer to milk and meat, translocation factors and dose coefficients for external exposure, ingestion (age-dependent values) and inhalation (age-dependent values). The radionuclides treated are those which could be of interest in the two safety assessments. Physical data such as half-lives and type of decay are also presented.

Safety Analysis For Evaluating (SAFE) sUAS, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — NASA's Unmanned Aircraft Systems Integration in the NAS (UAS in the NAS) project is aimed at developing new technologies to enable safe operations of UAS in the NAS....

Reactor safety systems

International Nuclear Information System (INIS)

Kafka, P.

1975-01-01

The spectrum of possible accidents may become characterized by the 'maximum credible accident', which will/will not happen. Similary, the performance of safety systems in a multitude of situations is sometimes simplified to 'the emergency system will/will not work' or even 'reactors are/ are not safe'. In assessing safety, one must avoid this fallacy of reducing a complicated situation to the simple black-and-white picture of yes/no. Similarly, there is a natural tendency continually to improve the safety of a system to assure that it is 'safe enough'. Any system can be made safer and there is usually some additional cost. It is important to balance the increased safety against the increased costs. (orig.) [de

Cost-competitive, inherently safe LFMBR pool plant

International Nuclear Information System (INIS)

McDonald, J.S.; Brunings, J.E.; Chang, Y.I.; Hren, R.R.; Seidensticker, R.W.

1984-01-01

The Cost-Competitive, Inherently Safe LMFBR Pool Plant design was prepared in GFY 1983 under a DOE-sponsored program. This plant design was developed as a joint effort by Rockwell International and the Argonne National Laboratory with major contributions from the Bechtel Group, Inc.; Combustion engineering, Inc.; the Chicago Bridge and Iron Company; and the General Electric Company. Using current LMFBR technology, many innovative features were developed and incorporated into the design to meet the ultimate objectives of the Breeder Program, i.e., energy costs competitive with LWRs and inherent safety features to maintain the plant in a safe condition following assumed accidents without requiring operator action. This paper provides a description of the principal features that were incorporated into the design to achieve low cost and inherent safety

Assessment of safety levels in operation rooms at two major tertiary care public hospitals of Karachi. Safe surgery saves life

International Nuclear Information System (INIS)

Minhas, M.S.; Muzzammil, M.; Effendi, J.

2017-01-01

The objectives of this study are to determine the knowledge and attitude towards surgical safety among the health care professionals including surgeons, anaesthetist, hospital administrators, and operation room personnel and raise awareness towards the importance of safe surgery. Method: A pilot cross- sectional study of 543 healthcare providers working in the operating rooms and the surgical intensive care units was conducted in two tertiary care hospitals, within a study period of one month. A structured questionnaire was constructed and an informed verbal consent was taken. The questionnaire was then distributed; data collected and analysed on SPSS 20.0. Results: A total of 543 respondents participated in the study out of which there were 375 (69%) men and 168 (31%) women. The ages ranged between 23-58 years, mean 40.5+-24.74. There were 110 (20.25%) surgeons, 58 (10.68%) anaesthetist, 132 (24.30%) trainees, 125 (23.02%) technicians, and were 118 (21.73%) nurses. The question regarding briefing operation room personnel is important for patient safety was agreed by 532 (98%) respondents. Amongst the respondents, 239 (44%) did not feel safe to be operated in their own setup. Team communication improvement through the check list implementation was agreed by 483 (89%) respondents. 514 (94.7%) opted for the checklist to be used while they are being operated. That operation room personnel frequently disregard established protocols was agreed by 374 (69%) respondents. 193 (35.54%) of the respondents stated that it is difficult for them to speak up in the or if they perceive a problem with patient care. Conclusion: Operation room personnel were not aware of several important areas related to briefing, communication, safety attitude, following standard protocols and use of WHO Surgical Safety check list. A pre-post intervention study should be conducted after formal introduction of the Checklist. Successful implementation will require taking all stake holders on board

Standards for safe operation of research reactors

International Nuclear Information System (INIS)

1996-01-01

The safety of research reactors is based on many factors such as suitable choice of location, design and construction according to the international standards, it also depends on well trained and qualified operational staff. These standards determine the responsibilities of all who are concerned with the research reactors safe operation, and who are responsible of all related activities in all the administrative and technical stages in a way that insures the safe operation of the reactor

Water Safety

Science.gov (United States)

... Staying Safe Videos for Educators Search English Español Water Safety KidsHealth / For Parents / Water Safety What's in ... remains your best measure of protection. Making Kids Water Wise It's important to teach your kids proper ...

Pseudoaneurysm of the Radial Artery After a Bicycle Fall.

Science.gov (United States)

Ratschiller, Thomas; Müller, Hannes; Schachner, Thomas; Zierer, Andreas

2018-07-01

We report a case of a 64-year-old man who developed a painful pulsatile mass in the distal forearm after a bicycle fall with fracture of the wrist. Ultrasonography confirmed a 2.5-cm large pseudoaneurysm of the radial artery. The patient underwent surgical exploration. The pseudoaneurysm was resected and the defect in the arterial wall was reconstructed with an autologous saphenous vein patch. We suggest that the double arterial supply of the hand should be preserved whenever possible.

Safety first. Status reports on the IAEA's safety standards

International Nuclear Information System (INIS)

Webb, G.; Karbassioun, A.; Linsley, G.; Rawl, R.

1998-01-01

Documents in the IAEA's Safety Standards Series known as RASS (Radiation Safety Standards) are produced to develop an internally consistent set of regulatory-style publications that reflects an international consensus on the principles of radiation protection and safety and their application through regulation. In this article are briefly presented the Agency's programmes on Nuclear Safety Standards (NUSS), Radioactive Waste Safety Standards (RADWASS), and Safe Transport of Radioactive Materials

Safe management of the operating lifetimes of nuclear power plants. INSAG-14. A report by the International Nuclear Safety Advisory Group

International Nuclear Information System (INIS)

2014-01-01

The International Atomic Energy Agency's activities relating to nuclear safety are based upon a number of premises. First and foremost, each Member State bears full responsibility for the safety of its nuclear facilities. States can be advised, but they cannot be relieved of this responsibility. Secondly, much can be gained by exchanging experience; lessons learned can prevent accidents. Finally, the image of nuclear safety is international; a serious accident anywhere affects the public's view of nuclear power everywhere. With the intention of strengthening its contribution to ensuring the safety of nuclear power plants, the IAEA established the International Nuclear Safety Advisory Group (INSAG), whose duties include serving as a forum for the exchange of information on nuclear safety issues of international significance and formulating, where possible, commonly shared safety principles. The present report by INSAG deals with a general approach to the safe management of the operating lifetimes of nuclear power plants. It responds to the concerns about maintaining adequate safety levels at ageing plants, even beyond their design lifetimes. Maintaining adequate safety levels implies first and foremost stringent control of equipment ageing, consistent with the design safety bases of the plants. However, as stated in the 75-INSAG-3 report, 'Basic Safety Principles for Nuclear Power Plants', nuclear safety requires a continuing quest for excellence; this implies enhancinuest for excellence; this implies enhancing the safety levels of operating nuclear power plants as far as reasonably practicable, with due account taken of experience and advancement in knowledge. Moreover, in view of the present situation of the nuclear industry, it may become difficult to maintain adequate competences in many countries with nuclear power programmes. These topics are considered in this latest INSAG report and released to a wider audience

Safe management of the operating lifetimes of nuclear power plants. INSAG-14. A report by the International Nuclear Safety Advisory Group

International Nuclear Information System (INIS)

1999-01-01

The International Atomic Energy Agency's activities relating to nuclear safety are based upon a number of premises. First and foremost, each Member State bears full responsibility for the safety of its nuclear facilities. States can be advised, but they cannot be relieved of this responsibility. Secondly, much can be gained by exchanging experience; lessons learned can prevent accidents. Finally, the image of nuclear safety is international; a serious accident anywhere affects the public's view of nuclear power everywhere. With the intention of strengthening its contribution to ensuring the safety of nuclear power plants, the IAEA established the International Nuclear Safety Advisory Group (INSAG), whose duties include serving as a forum for the exchange of information on nuclear safety issues of international significance and formulating, where possible, commonly shared safety principles. The present report by INSAG deals with a general approach to the safe management of the operating lifetimes of nuclear power plants. It responds to the concerns about maintaining adequate safety levels at ageing plants, even beyond their design lifetimes. Maintaining adequate safety levels implies first and foremost stringent control of equipment ageing, consistent with the design safety bases of the plants. However, as stated in the 75-INSAG-3 report, 'Basic Safety Principles for Nuclear Power Plants', nuclear safety requires a continuing quest for excellence; this implies enhancing the safety levels of operating nuclear power plants as far as reasonably practicable, with due account taken of experience and advancement in knowledge. Moreover, in view of the present situation of the nuclear industry, it may become difficult to maintain adequate competences in many countries with nuclear power programmes. These topics are considered in this latest INSAG report and released to a wider audience

How safe is safe?

International Nuclear Information System (INIS)

Hughes, C.F.; Flood, M.

1996-01-01

60 and 70 degree convexo-concave valve. Nine hundred and one valves were implanted in Australia. Twelve strut fractures were reported. Two other patients have been explanted and have demonstrated 'single leg separation'. This particular problem was only investigated when two patients died of a fractured valve in the same hospital on the same day. A retrospective study of all known patients in Australia has shown poor follow up, lack of knowledge and indeed lack of interest in device failure modes. Consequently, the Australian and New Zealand Heart Valve Registry was established to track all implanted valves and to notify physicians of any new information. This is perhaps the first device-specific register in Australia. The safety of individual devices is often not known by manufacturers, regulators and clinicians alike. No follow up is available and large volume long term studies are yet to be implemented for the majority of devices. Without such studies and without mandatory problem reporting, the relative safety of medical devices will continue to be measured by banner headlines, sensational TV 'grabs' and protracted law suits. At present, only schemes such as the Problem Reporting Scheme can tell us (albeit vaguely) 'how safe is safe'

Bamboo Bicycle – Past or Future?

Directory of Open Access Journals (Sweden)

Suzana Jakovljević

2016-01-01

Full Text Available In this article the experiment was carried out to establish tensile strength values of two different bamboo species, which are obtained by the static tensile test. The tensile strength results of two tested species Tonkin Cane and Ku Zhu bamboo are presented and compared with traditional materials used for bicycle frame to determine their suitability for designing a frame. Physiology and other properties of bamboo were elaborated as well. The purpose of this study was to gain more knowledge on bamboo and prove his suitability in use as an alternative for ecologically unacceptable materials. Therefore, application of the natural materials is essential for the sustainable development. The fact that they have unlimited resources the use of bamboo has great potential and this article explains why.

Design of an integrated information management system for safe management of radioactive waste

International Nuclear Information System (INIS)

Son, Dong Chan; Hong, Suk Young; An, Kyoung Il

2003-05-01

An integrated data management system for the safe management of radioactive waste and spent fuel in Korea is developed to collect basic information, provide the framework for national regulation, and improve national competition and efficiency in the management of radioactive waste and spent fuel. This system can also provide public access to information such as a statistical graphs and integrated data from various waste generators to meet increased public needs and interests. Objectives can be summarized as: the five principles (independence, openness, clearance, efficiency and reliance) of safety regulation can be realized. Public understanding and reliance on the safety of spent fuel and radioactive waste management can be promoted by providing reliable information. Ensure an openness within the international nuclear community and efficiently support international agreements among contracting parties by operating safe and efficient management of spent fuel and radioactive waste (IAEA joint convention on the safety of spent fuel management and on the safety of radioactive waste management). The system can compensate for the imperfections in safe regulation of radioactive waste and spent fuel management related to waste generation, storage and disposal, and make it possible to holistic control. Re-organize the basic framework of KINS's intermediate and long term research organization and trends, regarding waste management policy is to integrate safe management and unit safe disposal

Design of an integrated information management system for safe management of radioactive waste

Energy Technology Data Exchange (ETDEWEB)

Son, Dong Chan; Hong, Suk Young; An, Kyoung Il [Daesang Information Technology Co., Ltd., Seoul (Korea, Republic of)] (and others)

2003-05-15

An integrated data management system for the safe management of radioactive waste and spent fuel in Korea is developed to collect basic information, provide the framework for national regulation, and improve national competition and efficiency in the management of radioactive waste and spent fuel. This system can also provide public access to information such as a statistical graphs and integrated data from various waste generators to meet increased public needs and interests. Objectives can be summarized as: the five principles (independence, openness, clearance, efficiency and reliance) of safety regulation can be realized. Public understanding and reliance on the safety of spent fuel and radioactive waste management can be promoted by providing reliable information. Ensure an openness within the international nuclear community and efficiently support international agreements among contracting parties by operating safe and efficient management of spent fuel and radioactive waste (IAEA joint convention on the safety of spent fuel management and on the safety of radioactive waste management). The system can compensate for the imperfections in safe regulation of radioactive waste and spent fuel management related to waste generation, storage and disposal, and make it possible to holistic control. Re-organize the basic framework of KINS's intermediate and long term research organization and trends, regarding waste management policy is to integrate safe management and unit safe disposal.

Preliminary results from a field experiment on e-bike safety : speed choice and mental workload for middle-aged and elderly cyclists. Paper presented at the International Cycling Safety Conference 2013, Helmond, The Netherland, 20-21 November 2013.

NARCIS (Netherlands)

Twisk, D.A.M. Boele, M.J. Vlakveld, W.P. Christoph, M. Sikkema, R. Remij, R. & Schwab, A.L.

2014-01-01

To study the safety of e-bikes for the elderly, an experimental field study was conducted, using instrumented bicycles and comparing two age groups: older cyclists, n= 29, mean age = 70, SD = 4.2 and middle-aged cyclists, n = 29, mean age = 38, SD = 4.3. All were regular cyclists. They rode a fixed

Safety of nuclear power plants: Operation. Safety requirements

International Nuclear Information System (INIS)

2004-01-01

The safety of a nuclear power plant is ensured by means of its proper siting, design, construction and commissioning, followed by the proper management and operation of the plant. In a later phase, proper decommissioning is required. This Safety Requirements publication supersedes the Code on the Safety of Nuclear Power Plants: Operation, which was issued in 1988 as Safety Series No. 50-C-O (Rev. 1). The purpose of this revision was: to restructure Safety Series No. 50-C-O (Rev. 1) in the light of the basic objectives, concepts and principles in the Safety Fundamentals publication The Safety of Nuclear Installations. To be consistent with the requirements of the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources. And to reflect current practice and new concepts and technical developments. Guidance on fulfillment of these Safety Requirements may be found in the appropriate Safety Guides relating to plant operation. The objective of this publication is to establish the requirements which, in the light of experience and the present state of technology, must be satisfied to ensure the safe operation of nuclear power plants. These requirements are governed by the basic objectives, concepts and principles that are presented in the Safety Fundamentals publication The Safety of Nuclear Installations. This publication deals with matters specific to the safe operation of land based stationary thermal neutron nuclear power plants, and also covers their commissioning and subsequent decommissioning

Safety of nuclear power plants: Operation. Safety requirements

International Nuclear Information System (INIS)

2003-01-01

The safety of a nuclear power plant is ensured by means of its proper siting, design, construction and commissioning, followed by the proper management and operation of the plant. In a later phase, proper decommissioning is required. This Safety Requirements publication supersedes the Code on the Safety of Nuclear Power Plants: Operation, which was issued in 1988 as Safety Series No. 50-C-O (Rev. 1). The purpose of this revision was: to restructure Safety Series No. 50-C-O (Rev. 1) in the light of the basic objectives, concepts and principles in the Safety Fundamentals publication The Safety of Nuclear Installations. To be consistent with the requirements of the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources. And to reflect current practice and new concepts and technical developments. Guidance on fulfillment of these Safety Requirements may be found in the appropriate Safety Guides relating to plant operation. The objective of this publication is to establish the requirements which, in the light of experience and the present state of technology, must be satisfied to ensure the safe operation of nuclear power plants. These requirements are governed by the basic objectives, concepts and principles that are presented in the Safety Fundamentals publication The Safety of Nuclear Installations. This publication deals with matters specific to the safe operation of land based stationary thermal neutron nuclear power plants, and also covers their commissioning and subsequent decommissioning

Safety of nuclear power plants: Operation. Safety requirements

International Nuclear Information System (INIS)

2000-01-01

The safety of a nuclear power plant is ensured by means of its proper siting, design, construction and commissioning, followed by the proper management and operation of the plant. In a later phase, proper decommissioning is required. This Safety Requirements publication supersedes the Code on the Safety of Nuclear Power Plants: Operation, which was issued in 1988 as Safety Series No. 50-C-O (Rev. 1). The purpose of this revision was: to restructure Safety Series No. 50-C-O (Rev. 1) in the light of the basic objectives, concepts and principles in the Safety Fundamentals publication The Safety of Nuclear Installations; to be consistent with the requirements of the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources; and to reflect current practice and new concepts and technical developments. Guidance on fulfillment of these Safety Requirements may be found in the appropriate Safety Guides relating to plant operation. The objective of this publication is to establish the requirements which, in the light of experience and the present state of technology, must be satisfied to ensure the safe operation of nuclear power plants. These requirements are governed by the basic objectives, concepts and principles that are presented in the Safety Fundamentals publication The Safety of Nuclear Installations. This publication deals with matters specific to the safe operation of land based stationary thermal neutron nuclear power plants, and also covers their commissioning and subsequent decommissioning

Mountain Biking: Does Rough Terrain Make Rugged Riders?

Science.gov (United States)

Cinque, Chris

1987-01-01

No formal research has been conducted on the training effects and injury risks of all-terrain bicycles in mountain biking, but experience indicates they are apparently safe and may provide greater fitness benefits than traditional bicycles. The bicycles are described, and their apparent benefits are discussed. (MT)

Harvesting Energy from the Counterbalancing (Weaving Movement in Bicycle Riding

Directory of Open Access Journals (Sweden)

Shashank Priya

2012-07-01

Full Text Available Bicycles are known to be rich source of kinetic energy, some of which is available for harvesting during speedy and balanced maneuvers by the user. A conventional dynamo attached to the rim can generate a large amount of output power at an expense of extra energy input from the user. However, when applying energy conversion technology to human powered equipments, it is important to minimize the increase in extra muscular activity and to maximize the efficiency of human movements. This study proposes a novel energy harvesting methodology that utilizes lateral oscillation of bicycle frame (weaving caused by user weight shifting movements in order to increase the pedaling force in uphill riding or during quick speed-up. Based on the 3D motion analysis, we designed and implemented the prototype of an electro-dynamic energy harvester that can be mounted on the bicycle’s handlebar to collect energy from the side-to-side movement. The harvester was found to generate substantial electric output power of 6.6 mW from normal road riding. It was able to generate power even during uphill riding which has never been shown with other approaches. Moreover, harvesting of energy from weaving motion seems to increase the economy of cycling by helping efficient usage of human power.

Management for nuclear power plants for safe operation

International Nuclear Information System (INIS)

Kueffer, K.

1981-01-01

This lecture covers management aspects which have an immediate bearing on safety and identifies the objectives and tasks of management which are required for safe operation of a nuclear power plant and is based on the Codes of Practice and Safety Guides of the IAEA as well as arrangements in use at the Swiss Nuclear Power Station Beznau. (orig./RW)

Is irradiation of food stuffs safe?

International Nuclear Information System (INIS)

Maheshwari, Raaz K.; Yadav, Rajesh K.

2014-01-01

Many advanced and several developing countries have abundant supplies of fresh, safe and nutritious food stuffs. Yet, despite the many precautions and processes in place to ensure safe food supply, microbial contamination is still a concern. There are a number of food processing tools available that provide additional protection for the food we consume. One very promising tool is food irradiation, which is a process of imparting ionizing energy to food to kill microorganisms. Food irradiation is the process of exposing food to a controlled source of ionising radiation for the purposes of reduction of microbial Ioad, destruction of pathogens, extension of product shelf life, and/or disinfection of produce. The term irradiation often evokes fears of nuclear radioactivity and cancer among consumers. The process seems frightening because it is powerful and invisible. Consequently questions and concerns exist particularly about the safety or wholesomeness of irradiated food. The paper highlights food irradiation as a food safety measure and the issues of concerns for consumers. (author)

Flu Vaccine Safety Information

Science.gov (United States)

... Influenza Types Seasonal Avian Swine Variant Pandemic Other Flu Vaccine Safety Information Questions & Answers Language: English (US) ... safety of flu vaccines monitored? Egg Allergy Are flu vaccines safe? Flu vaccines have good safety record. ...

Safety Goal, Multi-unit Risk and PSA Uncertainty

Energy Technology Data Exchange (ETDEWEB)

Yang, Joon-Eon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-10-15

The safety goal is an answer of each country to the question 'How safe is safe enough?'. Table 1 shows some examples of the safety goal. However, many countries including Korea do not have the official safety goal for NPPs up to now since the establishment of safety goal is not just a technical issue but a very complex socio-technical issue. In establishing the safety goal for nuclear facilities, we have to consider various factors including not only technical aspects but also social, cultural ones. Recently, Korea is trying to establish the official safety goal. In this paper, we will review the relationship between the safety goal and Probabilistic Safety Assessment (PSA). We will also address some important technical issues to be considered in establishing the safety goal for NPPs from PSA point of view, i.e. a multi-unit risk issue and the uncertainty of PSA. In this paper, we reviewed some issues related to the safety goal and PSA. We believe that the safety goal is to be established in Korea considering the multi-unit risk. In addition, the relationship between the safety goal and PSA should be also defined clearly since PSA is the only way to answer to the question 'How safe is safe enough?'.

Safety Teams: An Approach to Engage Students in Laboratory Safety

Science.gov (United States)

Alaimo, Peter J.; Langenhan, Joseph M.; Tanner, Martha J.; Ferrenberg, Scott M.

2010-01-01

We developed and implemented a yearlong safety program into our organic chemistry lab courses that aims to enhance student attitudes toward safety and to ensure students learn to recognize, demonstrate, and assess safe laboratory practices. This active, collaborative program involves the use of student "safety teams" and includes…

76 FR 30495 - National Safe Boating Week, 2011

Science.gov (United States)

2011-05-25

... precautions and sensible behavior when spending time on the water. Safe boating is responsible boating. Individuals can prepare for excursions by taking boating safety courses and filing float plans with family...

踏车而飞：自行车与中国骑车人（1868-1949 年）[A History of the Bicycle and Chinese Cyclists, 1868-1949

Directory of Open Access Journals (Sweden)

Tao Xu

2012-06-01

Full Text Available Of the many “exotic” commodities from the West that have changed the lifestyle of the Chinese people over the course of the past two centuries, the bicycle stands out as a prominent example. It has so thoroughly transformed the Chinese mode of transportation that China in the late twentieth century was known as “the kingdom of bicycles.” This essay examines the history of that transformation. The first recorded importation of bicycles to Shanghai took place in 1868. Initially rejected by prospective customers for their incompatibility with Chinese cultural and social conventions, bicycles eventually gained visibility on the streets of many cities and suburbs. The bicycle meant many different things to different sectors of the population, and the social meaning of the bike also changed over time.The first section of this article offers an overview of modern Chinese cyclists. The author argues that early adopters were Manchu aristocrats and wealthy individuals who sported their bicycles on bumpy roads for the sheer enjoyment of the bike’s exotic quality. The second section of the article examines the story of Pu Yi, the last Qing ruler, and bikers in the Forbidden City. The third section examines women bike riders in China. The author presents evidence to show that cycling carried no liberating connotations for modern Chinese women. By the 1930s, bicycles had lost their exotic quality. They also came to be associated with the comings and goings of urban working people, when cars became the vehicles of the social and economic elite. The outbreak of the Sino-Japanese War (1937-45 created a petroleum shortage that grounded all private cars. Bicycles then emerged as the common mode of transportation for the rich as well as the poor, men as well as women. It was the war that laid the foundation for China’s modern transformation into a nation of bicycles.Note: Article is in Chinese.

Particulates and noise exposure during bicycle, bus and car commuting: A study in three European cities.

Science.gov (United States)

Okokon, Enembe O; Yli-Tuomi, Tarja; Turunen, Anu W; Taimisto, Pekka; Pennanen, Arto; Vouitsis, Ilias; Samaras, Zissis; Voogt, Marita; Keuken, Menno; Lanki, Timo

2017-04-01

In order to curb traffic-related air pollution and its impact on the physical environment, contemporary city commuters are encouraged to shift from private car use to active or public transport modes. However, personal exposures to particulate matter (PM), black carbon and noise during commuting may be substantial. Therefore, studies comparing exposures during recommended modes of transport versus car trips are needed. We measured personal exposure to various-sized particulates, soot, and noise during commuting by bicycle, bus and car in three European cities: Helsinki in Finland, Rotterdam in the Netherlands and Thessaloniki in Greece using portable monitoring devices. We monitored commonly travelled routes in these cities. The total number of one-way trips yielding data on any of the measured parameters were 84, 72, 94 and 69 for bicycle, bus, closed-window car and open-window car modes, respectively. The highest mean PM 2.5 (85µg/m 3 ), PM 10 (131µg/m 3 ), black carbon (10.9µg/m 3 ) and noise (75dBA) levels were recorded on the bus, bus (again), open-window car and bicycle modes, respectively, all in Thessaloniki, PM and soot concentrations were generally higher during biking and taking a bus than during a drive in a a car with closed windows. Ratios of bike:car PM 10 ranged from 1.1 in Thessaloniki to 2.6 in Helsinki, while bus:car ratios ranged from in 1.0 in Rotterdam to 5.6 in Thessaloniki. Higher noise levels were mostly recorded during bicycle rides. Based on our study, active- and public-transport commuters are often at risk of higher air pollution and noise exposure than private car users. This should be taken into account in urban transportation planning. Copyright © 2017 Elsevier Inc. All rights reserved.

Users, uses and potential of electric-assisted bicycles - Results of a survey in the Canton of Geneva; Usagers, usages et potentiel des velos a assistance electrique. Resultats d'une enquete menee dans le canton de Geneve

Energy Technology Data Exchange (ETDEWEB)

Bernardoni, S.; Iseli, A.; Munafo, S.

2009-12-15

The municipal, regional and national authorities wanted to assess the potential of electric-assisted bicycles in the Geneva region. A survey performed by the University of Geneva is reported. The following points were investigated: (i) Who uses an electric bicycle? (ii) How is an electric bicycle used? (iii) Why is an electric bicycle purchased? (iv) How many people could potentially use an electric bicycle in the Geneva region? (v) How much energy would be saved and what fraction of the carbon dioxide emissions would be avoided thanks to electric bicycles in the region? Some interesting results: Most current electric bicycle users are women and live in Geneva outskirts. Most users have an academic degree or equivalent and have a good job. Most of them have also a car and other bicycles without electric motor. The main uses of electric bicycles is commuting between house and job locations, leisure activities and shopping. The average annual distance per electric bicycle is about 3000 km. The majority of the electric bicycles in use are limited to 25 km/h and can be driven without any license. The users wish an extension of the bicycle track network along the roads and of the protected parking areas. The number of potential users in the City of Geneva is estimated to 9% or 15,600 new users and to 10% or 43,000 new users in the suburbs. In 2030, 7,500,000 litres-equivalent of gasoline could be annually saved in the region and more than 16,000 tons CO{sub 2} emissions avoided.

Safe China final report. Promoting the EU and German standards and practices of environmental protection and industrial safety in China

Energy Technology Data Exchange (ETDEWEB)

Jovanovic, A.; Guntrum, R.; Liu, Y. (eds.)

2013-07-01

This document presents the results of the international technology transfer and cooperation project SafeChina (''Promoting the EU and German standards and practices of Environmental Protection and Industrial Safety in China'', www.safechina.risk-technologies.com). The purpose of the project was to build an education, training and certification infrastructure and to offer to Chinese engineers and other professionals the possibility to learn about the EU HSE practices and regulation and qualify as Environmental- and Safety engineers according to the EU criteria, guidelines and practice. The main partners in the project have been Steinbeis University Berlin/Steinbeis Transfer Institute Advanced Risk Technologies, and the OEG mbH (Deutsche lnvestitions- und Entwicklungsgesellschaft mbH), subsidiary of KfW Banking Group, Germany. Main Chinese partners were Beijing Municipal Institute of Labour Protection and Capital University of Economics and Business, Beijing.

Safe China final report. Promoting the EU and German standards and practices of environmental protection and industrial safety in China

International Nuclear Information System (INIS)

Jovanovic, A.; Guntrum, R.; Liu, Y.

2013-01-01

This document presents the results of the international technology transfer and cooperation project SafeChina (''Promoting the EU and German standards and practices of Environmental Protection and Industrial Safety in China'', www.safechina.risk-technologies.com). The purpose of the project was to build an education, training and certification infrastructure and to offer to Chinese engineers and other professionals the possibility to learn about the EU HSE practices and regulation and qualify as Environmental- and Safety engineers according to the EU criteria, guidelines and practice. The main partners in the project have been Steinbeis University Berlin/Steinbeis Transfer Institute Advanced Risk Technologies, and the OEG mbH (Deutsche lnvestitions- und Entwicklungsgesellschaft mbH), subsidiary of KfW Banking Group, Germany. Main Chinese partners were Beijing Municipal Institute of Labour Protection and Capital University of Economics and Business, Beijing.

Procedures for the Safe Transport of Radioactive Material